jjb/cloud-infra/cloud-infra-periodic-onap.yaml

   1 ---
   2 #
   3 # ============LICENSE_START=======================================================
   4 #  Copyright (C) 2019 Nordix Foundation.
   5 # ================================================================================
   6 # Licensed under the Apache License, Version 2.0 (the "License");
   7 # you may not use this file except in compliance with the License.
   8 # You may obtain a copy of the License at
   9 #
  10 #      http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 # Unless required by applicable law or agreed to in writing, software
  13 # distributed under the License is distributed on an "AS IS" BASIS,
  14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 # See the License for the specific language governing permissions and
  16 # limitations under the License.
  17 #
  18 # SPDX-License-Identifier: Apache-2.0
  19 # ============LICENSE_END=========================================================
  20
  21 #--------------------------------------------------------------------------------------
  22 # The jobs declared in this JJB configuration file are used for verifying cloud-infra
  23 # engine from the tip of the master branch periodically to check the stability of it.
  24 #
  25 # These jobs are set to run on slaves with label vpod-deploy-ubuntu1604.
  26 # The slaves have
  27 #   - Ubuntu1604 as the base distro
  28 #   - nested virtualization
  29 #   - internet access
  30 #   - passwordless sudo
  31 #   - 16 CPUs/32GB RAM/200 GB Disk
  32 #   - docker, git vim curl wget zip unzip chrony apt-transport-https ca-certificates curl
  33 #     gnupg-agent software-properties-common docker-ce docker-ce-cli containerd.io openjdk-8-jre
  34 #
  35 # The slaves should not have a cloud infra scenario deployed on them.
  36 #--------------------------------------------------------------------------------------
  37
  38 - project:
  39     name: 'cloud-infra-periodic-onap'
  40
  41     project: 'infra/engine'
  42
  43     onap-branch:
  44       - 'dublin':
  45           nordix-branch: master
  46           onap-version: 4.0.0-ONAP
  47           onap-flavor: full
  48           engine-version: master
  49           engine-refspec: master
  50           deploy-scenario-version: master
  51           deploy-scenario-refspec: master
  52           disabled: false
  53       - 'master':
  54           nordix-branch: master
  55           onap-version: master
  56           onap-flavor: full
  57           engine-version: master
  58           engine-refspec: master
  59           deploy-scenario-version: master
  60           deploy-scenario-refspec: master
  61           disabled: true
  62
  63     distro:
  64       - ubuntu1804
  65
  66     deploy-scenario:
  67       - onap-oom-nofeature
  68
  69     type:
  70       - cloud:
  71           provisioner-type: heat
  72           installer-type: kubespray
  73           slave-label: 'jumphost-onap-ubuntu1804'
  74
  75     phase:
  76       - onap-deploy:
  77           build-timeout: 150
  78       - oom-healthcheck:
  79           build-timeout: 30
  80           test-type: oom-healthcheck
  81       - onap-healthcheck:
  82           build-timeout: 30
  83           test-type: onap-healthcheck
  84       - promote-onap:
  85           build-timeout: 5
  86
  87     jobs:
  88       - '{deploy-scenario}-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
  89       - '{phase}-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
  90
  91 - job-template:
  92     name: '{deploy-scenario}-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
  93
  94     project-type: multijob
  95
  96     disabled: '{obj:disabled}'
  97
  98     concurrent: true
  99
 100     parameters:
 101       - project-parameters:
 102           project: '{project}'
 103           branch: '{nordix-branch}'
 104       - nordix-gerrit-parameters
 105       - label:
 106           name: SLAVE_LABEL
 107           default: '{slave-label}'
 108           description: 'Slave label to schedule this job on. All slaves have Ubuntu1604 no matter what distro target nodes use'
 109       - string:
 110           name: DISTRO
 111           default: '{distro}'
 112           description: 'Distribution to use for configuring target nodes (networking etc.)'
 113       - string:
 114           name: PROVISIONER_TYPE
 115           default: '{provisioner-type}'
 116           description: 'Provisioner to use for provisioning nodes'
 117       - string:
 118           name: INSTALLER_TYPE
 119           default: '{installer-type}'
 120           description: 'Installer to use for deploying the scenario'
 121       - string:
 122           name: DEPLOY_SCENARIO
 123           default: '{deploy-scenario}'
 124           description: 'Scenario to deploy and test'
 125       - string:
 126           name: HEAT_ENVIRONMENT_FILE
 127           default: "file://$WORKSPACE/.cache/repos/swconfig/scenarios/$DEPLOY_SCENARIO/$INSTALLER_TYPE/role/$DEPLOY_SCENARIO/files/heat-environment-full.yaml"
 128           description: 'Type of the deployment'
 129       - string:
 130           name: DEPLOY_TYPE
 131           default: '{type}'
 132           description: 'Type of the deployment'
 133       - string:
 134           name: ONAP_VERSION
 135           default: '{onap-version}'
 136           description: 'ONAP version to deploy'
 137       - string:
 138           name: ONAP_FLAVOR
 139           default: '{onap-flavor}'
 140           description: 'ONAP flavor to deploy - could be core, small, medium, full. Also used for xtesting as run_type.'
 141       - string:
 142           name: ENGINE_REPO_URL
 143           default: 'https://gerrit.nordix.org/infra/engine.git'
 144           description: 'URL to Nordix cloud-infra/engine repository'
 145       - string:
 146           name: ENGINE_VERSION
 147           default: '{engine-version}'
 148           description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Could be sha, branch'
 149       - string:
 150           name: ENGINE_REFSPEC
 151           default: '{engine-refspec}'
 152           description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Must be refspec.'
 153       - string:
 154           name: DEPLOY_SCENARIO_VERSION
 155           default: '{deploy-scenario-version}'
 156           description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_REFSPEC and could be sha, branch.'
 157       - string:
 158           name: DEPLOY_SCENARIO_REFSPEC
 159           default: '{deploy-scenario-refspec}'
 160           description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_VERSION and must be refspec.'
 161       - string:
 162           name: XTESTING_REPO_URL
 163           default: 'https://gerrit.nordix.org/opnfv/xtesting-onap.git'
 164           description: 'URL to Nordix xtesting-onap repository'
 165       - string:
 166           name: ENGINE_ANSIBLE_PARAMS
 167           default: ''
 168           description: 'Extra parameters that can be added when run the play books.'
 169       - string:
 170           name: CLEANUP
 171           default: 'true'
 172           description: 'Cleanup leftovers of the previous run'
 173
 174     properties:
 175       - logrotate
 176       - build-blocker:
 177           use-build-blocker: true
 178           blocking-jobs:
 179             - 'cloud-infra-periodic-engine-.*'
 180             - 'onap-.*'
 181             - 'k8-.*'
 182           block-level: 'NODE'
 183       - throttle:
 184           max-per-node: 1
 185           max-total: 3
 186           option: project
 187
 188     wrappers:
 189       - build-timeout:
 190           timeout: 220
 191       - fix-workspace-permissions
 192
 193     scm:
 194       - git-scm:
 195           ssh-credentials-id: nordixinfra-nordix-gerrit-ssh
 196           branch: '{nordix-branch}'
 197           refspec: ''
 198           wipe_workspace: true
 199           clean_before: false
 200
 201     builders:
 202       - description-setter:
 203           description: $INSTALLER_TYPE | $DEPLOY_SCENARIO
 204       - multijob:
 205           name: Deploy ONAP
 206           condition: SUCCESSFUL
 207           projects:
 208             - name: 'onap-deploy-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
 209               current-parameters: false
 210               predefined-parameters: |
 211                 DISTRO=$DISTRO
 212                 DEPLOY_TYPE=$DEPLOY_TYPE
 213                 PROVISIIONER_TYPE=$PROVISIIONER_TYPE
 214                 INSTALLER_TYPE=$INSTALLER_TYPE
 215                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 216                 HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE
 217                 ONAP_VERSION=$ONAP_VERSION
 218                 ONAP_FLAVOR=$ONAP_FLAVOR
 219                 ENGINE_VERSION=$ENGINE_VERSION
 220                 ENGINE_REFSPEC=$ENGINE_REFSPEC
 221                 DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
 222                 DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
 223                 XTESTING_REPO_URL=$XTESTING_REPO_URL
 224                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 225                 CLEANUP=$CLEANUP
 226               git-revision: true
 227               node-parameters: true
 228               kill-phase-on: FAILURE
 229               abort-all-job: true
 230       - multijob:
 231           name: OOM Healthcheck xtesting
 232           condition: ALWAYS
 233           projects:
 234             - name: 'oom-healthcheck-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
 235               current-parameters: false
 236               predefined-parameters: |
 237                 DISTRO=$DISTRO
 238                 DEPLOY_TYPE=$DEPLOY_TYPE
 239                 HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE
 240                 PROVISIIONER_TYPE=$PROVISIIONER_TYPE
 241                 INSTALLER_TYPE=$INSTALLER_TYPE
 242                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 243                 ONAP_VERSION=$ONAP_VERSION
 244                 ONAP_FLAVOR=full
 245                 TEST_TYPE=oom-healthcheck
 246                 ENGINE_VERSION=$ENGINE_VERSION
 247                 ENGINE_REFSPEC=$ENGINE_REFSPEC
 248                 DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
 249                 DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
 250                 XTESTING_REPO_URL=$XTESTING_REPO_URL
 251                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 252                 CLEANUP=$CLEANUP
 253               node-parameters: true
 254               kill-phase-on: NEVER
 255               abort-all-job: false
 256       - multijob:
 257           name: ONAP Healthcheck xtesting
 258           condition: ALWAYS
 259           projects:
 260             - name: 'onap-healthcheck-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
 261               current-parameters: false
 262               predefined-parameters: |
 263                 DISTRO=$DISTRO
 264                 DEPLOY_TYPE=$DEPLOY_TYPE
 265                 PROVISIIONER_TYPE=$PROVISIIONER_TYPE
 266                 INSTALLER_TYPE=$INSTALLER_TYPE
 267                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 268                 HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE
 269                 ONAP_VERSION=$ONAP_VERSION
 270                 ONAP_FLAVOR=core
 271                 TEST_TYPE=onap-healthcheck
 272                 ENGINE_VERSION=$ENGINE_VERSION
 273                 ENGINE_REFSPEC=$ENGINE_REFSPEC
 274                 DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
 275                 DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
 276                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 277                 XTESTING_REPO_URL=$XTESTING_REPO_URL
 278                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 279                 CLEANUP=$CLEANUP
 280               node-parameters: true
 281               kill-phase-on: NEVER
 282               abort-all-job: false
 283             - name: 'onap-healthcheck-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
 284               current-parameters: false
 285               predefined-parameters: |
 286                 DISTRO=$DISTRO
 287                 DEPLOY_TYPE=$DEPLOY_TYPE
 288                 PROVISIIONER_TYPE=$PROVISIIONER_TYPE
 289                 INSTALLER_TYPE=$INSTALLER_TYPE
 290                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 291                 HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE
 292                 ONAP_VERSION=$ONAP_VERSION
 293                 ONAP_FLAVOR=small
 294                 TEST_TYPE=onap-healthcheck
 295                 ENGINE_VERSION=$ENGINE_VERSION
 296                 ENGINE_REFSPEC=$ENGINE_REFSPEC
 297                 DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
 298                 DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
 299                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 300                 XTESTING_REPO_URL=$XTESTING_REPO_URL
 301                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 302                 CLEANUP=$CLEANUP
 303               node-parameters: true
 304               kill-phase-on: NEVER
 305               abort-all-job: false
 306             - name: 'onap-healthcheck-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
 307               current-parameters: false
 308               predefined-parameters: |
 309                 DISTRO=$DISTRO
 310                 DEPLOY_TYPE=$DEPLOY_TYPE
 311                 PROVISIIONER_TYPE=$PROVISIIONER_TYPE
 312                 INSTALLER_TYPE=$INSTALLER_TYPE
 313                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 314                 HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE
 315                 ONAP_VERSION=$ONAP_VERSION
 316                 ONAP_FLAVOR=medium
 317                 TEST_TYPE=onap-healthcheck
 318                 ENGINE_VERSION=$ENGINE_VERSION
 319                 ENGINE_REFSPEC=$ENGINE_REFSPEC
 320                 DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
 321                 DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
 322                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 323                 XTESTING_REPO_URL=$XTESTING_REPO_URL
 324                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 325                 CLEANUP=$CLEANUP
 326               node-parameters: true
 327               kill-phase-on: NEVER
 328               abort-all-job: false
 329             - name: 'onap-healthcheck-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
 330               current-parameters: false
 331               predefined-parameters: |
 332                 DISTRO=$DISTRO
 333                 DEPLOY_TYPE=$DEPLOY_TYPE
 334                 PROVISIIONER_TYPE=$PROVISIIONER_TYPE
 335                 INSTALLER_TYPE=$INSTALLER_TYPE
 336                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 337                 HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE
 338                 ONAP_VERSION=$ONAP_VERSION
 339                 ONAP_FLAVOR=full
 340                 TEST_TYPE=onap-healthcheck
 341                 ENGINE_VERSION=$ENGINE_VERSION
 342                 ENGINE_REFSPEC=$ENGINE_REFSPEC
 343                 DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
 344                 DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
 345                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 346                 XTESTING_REPO_URL=$XTESTING_REPO_URL
 347                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 348                 CLEANUP=$CLEANUP
 349               node-parameters: true
 350               kill-phase-on: NEVER
 351               abort-all-job: false
 352       - multijob:
 353           name: Promote ONAP
 354           condition: ALWAYS
 355           projects:
 356             - name: 'promote-onap-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
 357               current-parameters: false
 358               predefined-parameters: |
 359                 DISTRO=$DISTRO
 360                 DEPLOY_TYPE=$DEPLOY_TYPE
 361                 HEAT_ENVIRONMENT_FILE=$HEAT_ENVIRONMENT_FILE
 362                 INSTALLER_TYPE=$INSTALLER_TYPE
 363                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 364                 ONAP_VERSION=$ONAP_VERSION
 365                 ONAP_FLAVOR=$ONAP_FLAVOR
 366                 ENGINE_VERSION=$ENGINE_VERSION
 367                 ENGINE_REFSPEC=$ENGINE_REFSPEC
 368                 DEPLOY_SCENARIO_VERSION=$DEPLOY_SCENARIO_VERSION
 369                 DEPLOY_SCENARIO_REFSPEC=$DEPLOY_SCENARIO_REFSPEC
 370                 XTESTING_REPO_URL=$XTESTING_REPO_URL
 371                 ENGINE_ANSIBLE_PARAMS=$ENGINE_ANSIBLE_PARAMS
 372                 CLEANUP=$CLEANUP
 373               node-parameters: true
 374               kill-phase-on: NEVER
 375               abort-all-job: false
 376
 377 - job-template:
 378     name: '{phase}-periodic-{distro}-{installer-type}-{type}-{onap-branch}'
 379
 380     disabled: false
 381
 382     concurrent: true
 383
 384     properties:
 385       - logrotate
 386
 387     parameters:
 388       - project-parameters:
 389           project: '{project}'
 390           branch: '{nordix-branch}'
 391       - nordix-gerrit-parameters
 392       - label:
 393           name: SLAVE_LABEL
 394           default: 'jumphost-onap-ubuntu1804'
 395           description: 'Slave label to schedule this job on. All slaves have Ubuntu1604 no matter what distro target nodes use'
 396       - string:
 397           name: DISTRO
 398           default: 'ubuntu1804'
 399           description: 'Distribution to use for configuring target nodes (networking etc.). Overriden by upstream job.'
 400       - string:
 401           name: PROVISIONER_TYPE
 402           default: 'heat'
 403           description: 'Provisioner to use for provisioning nodes'
 404       - string:
 405           name: INSTALLER_TYPE
 406           default: 'kubespray'
 407           description: 'Installer to use for deploying the scenario'
 408       - string:
 409           name: DEPLOY_SCENARIO
 410           default: 'onap-oom-nofeature'
 411           description: 'Scenario to deploy and test'
 412       - string:
 413           name: HEAT_ENVIRONMENT_FILE
 414           default: "file://$WORKSPACE/.cache/repos/swconfig/scenarios/$DEPLOY_SCENARIO/$INSTALLER_TYPE/role/$DEPLOY_SCENARIO/files/heat-environment-full.yaml"
 415           description: 'Type of the deployment'
 416       - string:
 417           name: DEPLOY_TYPE
 418           default: 'cloud'
 419           description: 'Type of the deployment. Overriden by upstream job.'
 420       - string:
 421           name: ONAP_VERSION
 422           default: 'master'
 423           description: 'ONAP version to deploy'
 424       - string:
 425           name: ONAP_FLAVOR
 426           default: '{onap-flavor}'
 427           description: 'ONAP flavor to deploy - could be core, small, medium, full. Also used for xtesting as run_type.'
 428       - string:
 429           name: TEST_TYPE
 430           default: 'oom-healthcheck'
 431           description: 'Test type to run. Could be oom-healthcheck or onap-healthcheck'
 432       - string:
 433           name: ENGINE_VERSION
 434           default: 'master'
 435           description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Could be sha, branch'
 436       - string:
 437           name: ENGINE_REFSPEC
 438           default: 'master'
 439           description: 'Development purposes only! Nordix Cloud Infra Engine version to use for deploying ONAP. Must be refspec.'
 440       - string:
 441           name: DEPLOY_SCENARIO_VERSION
 442           default: 'master'
 443           description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_REFSPEC and could be sha, branch.'
 444       - string:
 445           name: DEPLOY_SCENARIO_REFSPEC
 446           default: 'master'
 447           description: 'Development purposes only! Nordix Cloud Infra Scenario version to use for deploying ONAP. Depends on DEPLOY_SCENARIO_VERSION and must be refspec.'
 448       - string:
 449           name: XTESTING_REPO_URL
 450           default: 'https://gerrit.nordix.org/opnfv/xtesting-onap.git'
 451           description: 'URL to Nordix xtesting-onap repository'
 452       - string:
 453           name: ENGINE_ANSIBLE_PARAMS
 454           default: ''
 455           description: 'Extra parameters that can be added when run the play books.'
 456       - string:
 457           name: CLEANUP
 458           default: 'true'
 459
 460     wrappers:
 461       - credentials-binding:
 462           - file:
 463               credential-id: nordix-jenkins-openrcfile-city-frankfurt-defaultproject
 464               variable: OPENRC_FILE
 465       - mask-passwords
 466       - build-timeout:
 467           timeout: '{build-timeout}'
 468       - fix-workspace-permissions
 469
 470     scm:
 471       - git-scm:
 472           ssh-credentials-id: nordixinfra-nordix-gerrit-ssh
 473           branch: '{nordix-branch}'
 474           refspec: ''
 475           wipe_workspace: true
 476           clean_before: false
 477
 478     builders:
 479       - description-setter:
 480           description: $TEST_TYPE $ONAP_FLAVOR
 481       - '{phase}-macro'
 482
 483 # vim: set ts=2 sw=2 expandtab: