jjb/cloud-infra/cloud-infra-periodic-scenario.yaml

   1 ---
   2 #
   3 # ============LICENSE_START=======================================================
   4 #  Copyright (C) 2019 Nordix Foundation.
   5 # ================================================================================
   6 # Licensed under the Apache License, Version 2.0 (the "License");
   7 # you may not use this file except in compliance with the License.
   8 # You may obtain a copy of the License at
   9 #
  10 #      http://www.apache.org/licenses/LICENSE-2.0
  11 #
  12 # Unless required by applicable law or agreed to in writing, software
  13 # distributed under the License is distributed on an "AS IS" BASIS,
  14 # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  15 # See the License for the specific language governing permissions and
  16 # limitations under the License.
  17 #
  18 # SPDX-License-Identifier: Apache-2.0
  19 # ============LICENSE_END=========================================================
  20
  21 #--------------------------------------------------------------------------------------
  22 # The jobs declared in this JJB configuration file are used for verifying cloud-infra
  23 # engine from the tip of the master branch periodically to check the stability of it.
  24 #
  25 # These jobs are set to run on slaves with label vpod-deploy-ubuntu1604.
  26 # The slaves have
  27 #   - Ubuntu1604 as the base distro
  28 #   - nested virtualization
  29 #   - internet access
  30 #   - passwordless sudo
  31 #   - 16 CPUs/32GB RAM/200 GB Disk
  32 #   - docker, git vim curl wget zip unzip chrony apt-transport-https ca-certificates curl
  33 #     gnupg-agent software-properties-common docker-ce docker-ce-cli containerd.io openjdk-8-jre
  34 #
  35 # The slaves should not have a cloud infra scenario deployed on them.
  36 #--------------------------------------------------------------------------------------
  37
  38 - project:
  39     name: 'cloud-infra-periodic-scenario'
  40
  41     project: 'infra/engine'
  42
  43     stream:
  44       - 'master':
  45           branch: '{stream}'
  46           disabled: 'false'
  47
  48     distro:
  49       - ubuntu1804:
  50           disabled: 'false'
  51       - centos7:
  52           disabled: 'true'
  53
  54     deploy-scenario:
  55       - k8-calico-nofeature:
  56           installer-type: kubespray
  57       - k8-flannel-nofeature:
  58           installer-type: kubespray
  59       - k8-canal-nofeature:
  60           installer-type: kubespray
  61       - k8-cilium-nofeature:
  62           installer-type: kubespray
  63       - k8-weave-nofeature:
  64           installer-type: kubespray
  65       - k8-multus-nofeature:
  66           installer-type: kubespray
  67
  68     type:
  69       - baremetal:
  70           slave-label: 'baremetal-deploy'
  71           yardstick-dispatcher: 'influxdb'
  72
  73     phase:
  74       - deploy:
  75           build-timeout: 60
  76       - functest:
  77           build-timeout: 120
  78       - yardstick:
  79           build-timeout: 30
  80       - promote:
  81           build-timeout: 5
  82
  83     jobs:
  84       - '{deploy-scenario}-periodic-{distro}-{type}-{stream}'
  85       - 'scenario-periodic-{distro}-{phase}-{type}-{stream}'
  86
  87 - job-template:
  88     name: '{deploy-scenario}-periodic-{distro}-{type}-{stream}'
  89
  90     project-type: multijob
  91
  92     disabled: '{obj:disabled}'
  93
  94     concurrent: true
  95
  96     parameters:
  97       - project-parameters:
  98           project: '{project}'
  99           branch: '{branch}'
 100       - nordix-gerrit-parameters
 101       - label:
 102           name: SLAVE_LABEL
 103           default: '{slave-label}'
 104           description: 'Slave label to schedule this job on. All slaves have Ubuntu1604 no matter what distro target nodes use'
 105       - string:
 106           name: DISTRO
 107           default: '{distro}'
 108           description: 'Distribution to use for configuring target nodes (networking etc.)'
 109       - string:
 110           name: DEPLOY_TYPE
 111           default: '{type}'
 112           description: 'Type of the deployment'
 113       - string:
 114           name: USE_PREBUILT_DEPLOYMENT_IMAGE
 115           default: 'true'
 116           description: 'Use prebuilt deployment image while running as part of CI/CD'
 117       - string:
 118           name: INSTALLER_TYPE
 119           default: '{installer-type}'
 120           description: 'Installer to use for deploying the scenario'
 121       - string:
 122           name: DEPLOY_SCENARIO
 123           default: '{deploy-scenario}'
 124           description: 'Scenario to deploy and test'
 125       - string:
 126           name: TEST_SUITE
 127           default: 'smoke'
 128           description: 'Test suite to run'
 129       - string:
 130           name: YARDSTICK_DISPATCHER
 131           default: '{yardstick-dispatcher}'
 132           description: 'Dispatcher to use for Yardstick reporting'
 133       - string:
 134           name: CLEANUP
 135           default: 'true'
 136           description: 'Cleanup leftovers of the previous run'
 137
 138     properties:
 139       - logrotate
 140       - build-blocker:
 141           use-build-blocker: true
 142           blocking-jobs:
 143             - 'cloud-infra-periodic-engine-.*'
 144             - 'k8-.*'
 145           block-level: 'NODE'
 146       - throttle:
 147           max-per-node: 1
 148           max-total: 3
 149           option: project
 150
 151     wrappers:
 152       - build-timeout:
 153           timeout: 210
 154       - fix-workspace-permissions
 155
 156     scm:
 157       - git-scm:
 158           ssh-credentials-id: nordixinfra-nordix-gerrit-ssh
 159           branch: '{branch}'
 160           refspec: ''
 161           wipe_workspace: true
 162           clean_before: false
 163
 164     triggers:
 165       - timed: '@daily'
 166
 167     builders:
 168       - description-setter:
 169           description: $INSTALLER_TYPE
 170       - multijob:
 171           name: deploy
 172           condition: SUCCESSFUL
 173           projects:
 174             - name: 'scenario-periodic-{distro}-deploy-{type}-{stream}'
 175               current-parameters: true
 176               predefined-parameters: |
 177                 DISTRO=$DISTRO
 178                 DEPLOY_TYPE=$DEPLOY_TYPE
 179                 USE_PREBUILT_DEPLOYMENT_IMAGE=$USE_PREBUILT_DEPLOYMENT_IMAGE
 180                 INSTALLER_TYPE=$INSTALLER_TYPE
 181                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 182                 CLEANUP=$CLEANUP
 183               git-revision: true
 184               node-parameters: true
 185               kill-phase-on: FAILURE
 186               abort-all-job: true
 187       - multijob:
 188           name: functest
 189           condition: SUCCESSFUL
 190           projects:
 191             - name: 'scenario-periodic-{distro}-functest-{type}-{stream}'
 192               current-parameters: true
 193               predefined-parameters: |
 194                 DISTRO=$DISTRO
 195                 DEPLOY_TYPE=$DEPLOY_TYPE
 196                 INSTALLER_TYPE=$INSTALLER_TYPE
 197                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 198                 TEST_SUITE=$TEST_SUITE
 199                 YARDSTICK_DISPATCHER=$YARDSTICK_DISPATCHER
 200                 CLEANUP=$CLEANUP
 201               node-parameters: true
 202               kill-phase-on: FAILURE
 203               abort-all-job: true
 204       - multijob:
 205           name: yardstick
 206           condition: SUCCESSFUL
 207           projects:
 208             - name: 'scenario-periodic-{distro}-yardstick-{type}-{stream}'
 209               current-parameters: true
 210               predefined-parameters: |
 211                 DISTRO=$DISTRO
 212                 DEPLOY_TYPE=$DEPLOY_TYPE
 213                 INSTALLER_TYPE=$INSTALLER_TYPE
 214                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 215                 TEST_SUITE=$TEST_SUITE
 216                 YARDSTICK_DISPATCHER=$YARDSTICK_DISPATCHER
 217                 CLEANUP=$CLEANUP
 218               node-parameters: true
 219               kill-phase-on: FAILURE
 220               abort-all-job: true
 221       - multijob:
 222           name: promote
 223           condition: SUCCESSFUL
 224           projects:
 225             - name: 'scenario-periodic-{distro}-promote-{type}-{stream}'
 226               current-parameters: true
 227               predefined-parameters: |
 228                 DISTRO=$DISTRO
 229                 DEPLOY_TYPE=$DEPLOY_TYPE
 230                 INSTALLER_TYPE=$INSTALLER_TYPE
 231                 DEPLOY_SCENARIO=$DEPLOY_SCENARIO
 232                 TEST_SUITE=$TEST_SUITE
 233                 YARDSTICK_DISPATCHER=$YARDSTICK_DISPATCHER
 234                 CLEANUP=$CLEANUP
 235               node-parameters: true
 236               kill-phase-on: FAILURE
 237               abort-all-job: true
 238
 239 - job-template:
 240     name: 'scenario-periodic-{distro}-{phase}-{type}-{stream}'
 241
 242     disabled: false
 243
 244     concurrent: true
 245
 246     properties:
 247       - logrotate
 248
 249     parameters:
 250       - string:
 251           name: PROJECT
 252           default: $GERRIT_PROJECT
 253       - string:
 254           name: DISTRO
 255           default: 'ubuntu1804'
 256           description: 'Distribution to use for configuring target nodes (networking etc.). Overriden by upstream job.'
 257       - string:
 258           name: DEPLOY_TYPE
 259           default: 'virtual'
 260           description: 'Type of the deployment. Overriden by upstream job.'
 261       - string:
 262           name: USE_PREBUILT_DEPLOYMENT_IMAGE
 263           default: 'false'
 264           description: 'Use prebuilt deployment image while running as part of CI/CD'
 265       - string:
 266           name: ENGINE_ANSIBLE_PARAMS
 267           default: ' -v '
 268           description: 'Extra paramters that can be added when run the play books.'
 269       - string:
 270           name: DEPLOY_SCENARIO
 271           default: 'k8-calico-nofeature'
 272           description: 'Scenario to deploy and test'
 273       - string:
 274           name: INSTALLER_TYPE
 275           default: 'kubespray'
 276           description: 'Installer to use for deploying the scenario'
 277       - string:
 278           name: TEST_FW
 279           default: '{phase}'
 280           description: 'Test framework to use'
 281       - string:
 282           name: TEST_SUITE
 283           default: 'smoke'
 284           description: 'Test suite to run'
 285       - string:
 286           name: TEST_REPO_URL
 287           default: 'https://gerrit.nordix.org/infra/test.git'
 288           description: 'URL to Nordix Cloud Infra test repository'
 289       - string:
 290           name: YARDSTICK_DISPATCHER
 291           default: 'file'
 292           description: 'Dispatcher to use for Yardstick reporting'
 293       - string:
 294           name: CLEANUP
 295           default: 'false'
 296
 297     wrappers:
 298       - build-timeout:
 299           timeout: '{build-timeout}'
 300       - fix-workspace-permissions
 301
 302     scm:
 303       - git-scm:
 304           ssh-credentials-id: nordixinfra-nordix-gerrit-ssh
 305           branch: '{branch}'
 306           refspec: ''
 307           wipe_workspace: true
 308           clean_before: false
 309
 310     builders:
 311       - description-setter:
 312           description: $INSTALLER_TYPE - $DEPLOY_SCENARIO
 313       - 'scenario-{phase}-macro'
 314
 315 # vim: set ts=2 sw=2 expandtab: