help text: regularize format, and shrink
getty: shrink, and improve comments
mount: OPT_ALL is superfluous, we already have OPT_a
function old new delta
bcode 47 25 -22
getty_main 2503 2349 -154
packed_usage 23928 23698 -230
------------------------------------------------------------------------------
(add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-406) Total: -406 bytes
text data bss dec hex filename
798031 658 7428 806117 c4ce5 busybox_old
797604 658 7428 805690 c4b3a busybox_unstripped
diff --git a/include/usage.h b/include/usage.h
index 2a49454..f94fa2f 100644
--- a/include/usage.h
+++ b/include/usage.h
@@ -14,48 +14,47 @@
#define __BB_USAGE_H__
#define addgroup_trivial_usage \
- "[-g GID]"USE_FEATURE_ADDUSER_TO_GROUP(" [user_name]")" group_name"
+ "[-g GID] " USE_FEATURE_ADDUSER_TO_GROUP("[user_name] ") "group_name"
#define addgroup_full_usage \
- "Add a group"USE_FEATURE_ADDUSER_TO_GROUP(" or add an user to a group") \
- "\n\nOptions:\n" \
- " -g GID Group id"
+ "Add a group " USE_FEATURE_ADDUSER_TO_GROUP("or add an user to a group") "\n" \
+ "\nOptions:" \
+ "\n -g GID Group id"
#define adduser_trivial_usage \
"[OPTIONS] user_name"
#define adduser_full_usage \
- "Add an user" \
- "\n\nOptions:\n" \
- " -h DIR Home directory\n" \
- " -g GECOS GECOS field\n" \
- " -s SHELL Login shell\n" \
- " -G GROUP Add user to existing group\n" \
- " -S Create a system user\n" \
- " -D Do not assign a password\n" \
- " -H Do not create home directory"
+ "Add an user\n" \
+ "\nOptions:" \
+ "\n -h DIR Home directory" \
+ "\n -g GECOS GECOS field" \
+ "\n -s SHELL Login shell" \
+ "\n -G GROUP Add user to existing group" \
+ "\n -S Create a system user" \
+ "\n -D Do not assign a password" \
+ "\n -H Do not create home directory" \
#define adjtimex_trivial_usage \
"[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]"
#define adjtimex_full_usage \
- "Read and optionally set system timebase parameters.\n" \
- "See adjtimex(2)." \
- "\n\nOptions:\n" \
- " -q Quiet\n" \
- " -o offset Time offset, microseconds\n" \
- " -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)\n" \
- " (positive values make clock run faster)\n" \
- " -t tick Microseconds per tick, usually 10000\n" \
- " -p timeconstant"
+ "Read and optionally set system timebase parameters. See adjtimex(2).\n" \
+ "\nOptions:" \
+ "\n -q Quiet" \
+ "\n -o offset Time offset, microseconds" \
+ "\n -f frequency Frequency adjust, integer kernel units (65536 is 1ppm)" \
+ "\n (positive values make clock run faster)" \
+ "\n -t tick Microseconds per tick, usually 10000" \
+ "\n -p timeconstant" \
#define ar_trivial_usage \
"[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES"
#define ar_full_usage \
- "Extract or list FILES from an ar archive" \
- "\n\nOptions:\n" \
- " -o Preserve original dates\n" \
- " -p Extract to stdout\n" \
- " -t List\n" \
- " -x Extract\n" \
- " -v Verbose"
+ "Extract or list FILES from an ar archive\n" \
+ "\nOptions:" \
+ "\n -o Preserve original dates" \
+ "\n -p Extract to stdout" \
+ "\n -t List" \
+ "\n -x Extract" \
+ "\n -v Verbose" \
#define arp_trivial_usage \
"\n" \
@@ -65,8 +64,8 @@
"[-v] [-H type] [-i if] -s hostname hw_addr [netmask nm] pub\n" \
"[-v] [-H type] [-i if] -Ds hostname ifa [netmask nm] pub\n"
#define arp_full_usage \
- "Manipulate ARP cache" \
- "\n\nOptions:" \
+ "Manipulate ARP cache\n" \
+ "\nOptions:" \
"\n -a Display (all) hosts" \
"\n -s Set new ARP entry" \
"\n -d Delete a specified entry" \
@@ -75,24 +74,24 @@
"\n -i IF Network interface" \
"\n -D Read <hwaddr> from given device" \
"\n -A, -p AF Protocol family" \
- "\n -H HWTYPE Hardware address type"
+ "\n -H HWTYPE Hardware address type" \
#define arping_trivial_usage \
"[-fqbDUA] [-c count] [-w timeout] [-I dev] [-s sender] target"
#define arping_full_usage \
- "Ping hosts by ARP requests/replies" \
- "\n\nOptions:\n" \
- " -f Quit on first ARP reply\n" \
- " -q Quiet\n" \
- " -b Keep broadcasting, don't go unicast\n" \
- " -D Duplicated address detection mode\n" \
- " -U Unsolicited ARP mode, update your neighbors\n" \
- " -A ARP answer mode, update your neighbors\n" \
- " -c N Stop after sending N ARP requests\n" \
- " -w timeout Time to wait for ARP reply, in seconds\n" \
- " -I dev Interface to use (default eth0)\n" \
- " -s sender Sender IP address\n" \
- " target Target IP address"
+ "Send ARP requests/replies\n" \
+ "\nOptions:" \
+ "\n -f Quit on first ARP reply" \
+ "\n -q Quiet" \
+ "\n -b Keep broadcasting, don't go unicast" \
+ "\n -D Duplicated address detection mode" \
+ "\n -U Unsolicited ARP mode, update your neighbors" \
+ "\n -A ARP answer mode, update your neighbors" \
+ "\n -c N Stop after sending N ARP requests" \
+ "\n -w timeout Time to wait for ARP reply, in seconds" \
+ "\n -I dev Interface to use (default eth0)" \
+ "\n -s sender Sender IP address" \
+ "\n target Target IP address" \
#define ash_trivial_usage \
"[FILE]...\n" \
@@ -103,10 +102,10 @@
#define awk_trivial_usage \
"[OPTION]... [program-text] [FILE...]"
#define awk_full_usage \
- "Options:\n" \
- " -v var=val Set variable\n" \
- " -F sep Use sep as field separator\n" \
- " -f file Read program from file"
+ "Options:" \
+ "\n -v var=val Set variable" \
+ "\n -F sep Use sep as field separator" \
+ "\n -f file Read program from file" \
#define basename_trivial_usage \
"FILE [SUFFIX]"
@@ -124,29 +123,29 @@
#define brctl_trivial_usage \
"COMMAND [BRIDGE [INTERFACE]]"
#define brctl_full_usage \
- "Manage ethernet bridges." \
- "\n\nCommands:\n" \
- " addbr BRIDGE Create BRIDGE\n" \
- " delbr BRIDGE Delete BRIDGE\n" \
- " addif BRIDGE IFACE Add IFACE to BRIDGE\n" \
- " delif BRIDGE IFACE Delete IFACE from BRIDGE" \
-USE_FEATURE_BRCTL_FANCY("\n" \
- " setageing BRIDGE TIME Set ageing time\n" \
- " setfd BRIDGE TIME Set bridge forward delay\n" \
- " sethello BRIDGE TIME Set hello time\n" \
- " setmaxage BRIDGE TIME Set max message age\n" \
- " setpathcost BRIDGE COST Set path cost\n" \
- " setportprio BRIDGE PRIO Set port priority\n" \
- " setbridgeprio BRIDGE PRIO Set bridge priority\n" \
- " stp BRIDGE [1|0] STP on/off\n" \
-)
+ "Manage ethernet bridges.\n" \
+ "\nCommands:" \
+ "\n addbr BRIDGE Create BRIDGE" \
+ "\n delbr BRIDGE Delete BRIDGE" \
+ "\n addif BRIDGE IFACE Add IFACE to BRIDGE" \
+ "\n delif BRIDGE IFACE Delete IFACE from BRIDGE" \
+ USE_FEATURE_BRCTL_FANCY( \
+ "\n setageing BRIDGE TIME Set ageing time" \
+ "\n setfd BRIDGE TIME Set bridge forward delay" \
+ "\n sethello BRIDGE TIME Set hello time" \
+ "\n setmaxage BRIDGE TIME Set max message age" \
+ "\n setpathcost BRIDGE COST Set path cost" \
+ "\n setportprio BRIDGE PRIO Set port priority" \
+ "\n setbridgeprio BRIDGE PRIO Set bridge priority" \
+ "\n stp BRIDGE [1|0] STP on/off" \
+ )
#define bunzip2_trivial_usage \
"[OPTION]... [FILE]"
#define bunzip2_full_usage \
- "Uncompress FILE (or standard input if FILE is '-' or omitted)" \
- "\n\nOptions:\n" \
- " -c Write to standard output\n" \
- " -f Force"
+ "Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \
+ "\nOptions:" \
+ "\n -c Write to standard output" \
+ "\n -f Force" \
#define bzip2_trivial_usage \
"[OPTION]... [FILE]..."
@@ -157,7 +156,7 @@
"\n -c Write to standard output" \
"\n -d Decompress" \
"\n -f Force" \
- "\n -1..-9 Compression level"
+ "\n -1..-9 Compression level" \
#define busybox_notes_usage \
"Hello world!\n"
@@ -170,10 +169,10 @@
#define unlzma_trivial_usage \
"[OPTION]... [FILE]"
#define unlzma_full_usage \
- "Uncompress FILE (or standard input if FILE is '-' or omitted)" \
- "\n\nOptions:\n" \
- " -c Write to standard output\n" \
- " -f Force"
+ "Uncompress FILE (or standard input if FILE is '-' or omitted)\n" \
+ "\nOptions:" \
+ "\n -c Write to standard output" \
+ "\n -f Force" \
#define lzmacat_trivial_usage \
"FILE"
@@ -183,17 +182,18 @@
#define cal_trivial_usage \
"[-jy] [[month] year]"
#define cal_full_usage \
- "Display a calendar" \
- "\n\nOptions:" \
- "\n -j Use julian dates" \
- "\n -y Display the entire year"
+ "Display a calendar\n" \
+ "\nOptions:" \
+ "\n -j Use julian dates" \
+ "\n -y Display the entire year" \
#define cat_trivial_usage \
"[-u] [FILE]..."
#define cat_full_usage \
- "Concatenate FILE(s) and print them to stdout" \
- "\n\nOptions:" \
- "\n -u Use unbuffered i/o (ignored)"
+ "Concatenate FILE(s) and print them to stdout\n" \
+ "\nOptions:" \
+ "\n -u Use unbuffered i/o (ignored)" \
+
#define cat_example_usage \
"$ cat /proc/uptime\n" \
"110716.72 17.67"
@@ -201,11 +201,11 @@
#define catv_trivial_usage \
"[-etv] [FILE]..."
#define catv_full_usage \
- "Display nonprinting characters as ^x or M-x" \
- "\n\nOptions:\n" \
- " -e End each line with $\n" \
- " -t Show tabs as ^I\n" \
- " -v Don't use ^x or M-x escapes"
+ "Display nonprinting characters as ^x or M-x\n" \
+ "\nOptions:" \
+ "\n -e End each line with $" \
+ "\n -t Show tabs as ^I" \
+ "\n -v Don't use ^x or M-x escapes" \
#define chat_trivial_usage \
"EXPECT [SEND [EXPECT [SEND...]]]"
@@ -218,26 +218,26 @@
#define chattr_trivial_usage \
"[-R] [-+=AacDdijsStTu] [-v version] files..."
#define chattr_full_usage \
- "Change file attributes on an ext2 fs\n\n" \
- "Modifiers:\n" \
- " - Remove attributes\n" \
- " + Add attributes\n" \
- " = Set attributes\n" \
- "Attributes:\n" \
- " A Don't track atime\n" \
- " a Append mode only\n" \
- " c Enable compress\n" \
- " D Write dir contents synchronously\n" \
- " d Do not backup with dump\n" \
- " i Cannot be modified (immutable)\n" \
- " j Write all data to journal first\n" \
- " s Zero disk storage when deleted\n" \
- " S Write file contents synchronously\n" \
- " t Disable tail-merging of partial blocks with other files\n" \
- " u Allow file to be undeleted\n" \
- "Options:\n" \
- " -R Recursively list subdirectories\n" \
- " -v Set the file's version/generation number"
+ "Change file attributes on an ext2 fs\n" \
+ "\nModifiers:" \
+ "\n - Remove attributes" \
+ "\n + Add attributes" \
+ "\n = Set attributes" \
+ "\nAttributes:" \
+ "\n A Don't track atime" \
+ "\n a Append mode only" \
+ "\n c Enable compress" \
+ "\n D Write dir contents synchronously" \
+ "\n d Do not backup with dump" \
+ "\n i Cannot be modified (immutable)" \
+ "\n j Write all data to journal first" \
+ "\n s Zero disk storage when deleted" \
+ "\n S Write file contents synchronously" \
+ "\n t Disable tail-merging of partial blocks with other files" \
+ "\n u Allow file to be undeleted" \
+ "\nOptions:" \
+ "\n -R Recursively list subdirectories" \
+ "\n -v Set the file's version/generation number" \
#define chcon_trivial_usage \
"[OPTIONS] CONTEXT FILE..." \
@@ -248,41 +248,40 @@
#define chcon_full_usage \
"Change the security context of each FILE to CONTEXT\n" \
USE_FEATURE_CHCON_LONG_OPTIONS( \
- "\n -v,--verbose Verbose" \
- "\n -c,--changes Report changes made" \
- "\n -h,--no-dereference Affect symlinks instead of their targets" \
- "\n -f,--silent,--quiet Suppress most error messages" \
- "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
- "\n -u,--user=USER Set user USER in the target security context" \
- "\n -r,--role=ROLE Set role ROLE in the target security context" \
- "\n -t,--type=TYPE Set type TYPE in the target security context" \
- "\n -l,--range=RANGE Set range RANGE in the target security context" \
- "\n -R,--recursive Recurse subdirectories" \
+ "\n -v,--verbose Verbose" \
+ "\n -c,--changes Report changes made" \
+ "\n -h,--no-dereference Affect symlinks instead of their targets" \
+ "\n -f,--silent,--quiet Suppress most error messages" \
+ "\n --reference=RFILE Use RFILE's group instead of using a CONTEXT value" \
+ "\n -u,--user=USER Set user/role/type/range in the target" \
+ "\n -r,--role=ROLE security context" \
+ "\n -t,--type=TYPE" \
+ "\n -l,--range=RANGE" \
+ "\n -R,--recursive Recurse subdirectories" \
) \
SKIP_FEATURE_CHCON_LONG_OPTIONS( \
- "\n -v Verbose" \
- "\n -c Report changes made" \
- "\n -h Affect symlinks instead of their targets" \
- "\n -f Suppress most error messages" \
- "\n -u USER Set user USER in the target security context" \
- "\n -r ROLE Set role ROLE in the target security context" \
- "\n -t TYPE Set type TYPE in the target security context" \
- "\n -l RNG Set range RNE in the target security context" \
- "\n -R Recurse subdirectories" \
+ "\n -v Verbose" \
+ "\n -c Report changes made" \
+ "\n -h Affect symlinks instead of their targets" \
+ "\n -f Suppress most error messages" \
+ "\n -u USER Set user/role/type/range in the target security context" \
+ "\n -r ROLE" \
+ "\n -t TYPE" \
+ "\n -l RNG" \
+ "\n -R Recurse subdirectories" \
)
-
#define chmod_trivial_usage \
"[-R"USE_DESKTOP("cvf")"] MODE[,MODE]... FILE..."
#define chmod_full_usage \
"Each MODE is one or more of the letters ugoa, one of the\n" \
- "symbols +-= and one or more of the letters rwxst" \
- "\n\nOptions:" \
- "\n -R Recurse directories" \
+ "symbols +-= and one or more of the letters rwxst\n" \
+ "\nOptions:" \
+ "\n -R Recurse directories" \
USE_DESKTOP( \
- "\n -c List changed files" \
- "\n -v List all files" \
- "\n -f Hide errors" \
+ "\n -c List changed files" \
+ "\n -v List all files" \
+ "\n -f Hide errors" \
)
#define chmod_example_usage \
"$ ls -l /tmp/foo\n" \
@@ -297,17 +296,17 @@
#define chgrp_trivial_usage \
"[-RhLHP"USE_DESKTOP("cvf")"]... GROUP FILE..."
#define chgrp_full_usage \
- "Change the group membership of each FILE to GROUP" \
- "\n\nOptions:" \
- "\n -R Recurse directories" \
- "\n -h Affect symlinks instead of symlink targets" \
- "\n -L Traverse all symlinks to directories" \
- "\n -H Traverse symlinks on command line only" \
- "\n -P Do not traverse symlinks (default)" \
+ "Change the group membership of each FILE to GROUP\n" \
+ "\nOptions:" \
+ "\n -R Recurse directories" \
+ "\n -h Affect symlinks instead of symlink targets" \
+ "\n -L Traverse all symlinks to directories" \
+ "\n -H Traverse symlinks on command line only" \
+ "\n -P Do not traverse symlinks (default)" \
USE_DESKTOP( \
- "\n -c List changed files" \
- "\n -v Verbose" \
- "\n -f Hide errors" \
+ "\n -c List changed files" \
+ "\n -v Verbose" \
+ "\n -f Hide errors" \
)
#define chgrp_example_usage \
"$ ls -l /tmp/foo\n" \
@@ -319,17 +318,17 @@
#define chown_trivial_usage \
"[-RhLHP"USE_DESKTOP("cvf")"]... OWNER[<.|:>[GROUP]] FILE..."
#define chown_full_usage \
- "Change the owner and/or group of each FILE to OWNER and/or GROUP" \
- "\n\nOptions:" \
- "\n -R Recurse directories" \
- "\n -h Affect symlinks instead of symlink targets" \
- "\n -L Traverse all symlinks to directories" \
- "\n -H Traverse symlinks on command line only" \
- "\n -P Do not traverse symlinks (default)" \
+ "Change the owner and/or group of each FILE to OWNER and/or GROUP\n" \
+ "\nOptions:" \
+ "\n -R Recurse directories" \
+ "\n -h Affect symlinks instead of symlink targets" \
+ "\n -L Traverse all symlinks to directories" \
+ "\n -H Traverse symlinks on command line only" \
+ "\n -P Do not traverse symlinks (default)" \
USE_DESKTOP( \
- "\n -c List changed files" \
- "\n -v List all files" \
- "\n -f Hide errors" \
+ "\n -c List changed files" \
+ "\n -v List all files" \
+ "\n -f Hide errors" \
)
#define chown_example_usage \
"$ ls -l /tmp/foo\n" \
@@ -346,26 +345,27 @@
"[-/ dir] [-n nice] [-m bytes] [-d bytes] [-o files] " \
"[-p processes] [-f bytes] [-c bytes] prog args"
#define chpst_full_usage \
- "Change the process state and run specified program" \
- "\n\nOptions:\n" \
- " -u user[:grp] Set uid and gid\n" \
- " -U user[:grp] Set environment variables UID and GID\n" \
- " -e dir Set environment variables as specified by files\n" \
- " in the directory: file=1st_line_of_file\n" \
- " -/ dir Chroot to dir\n" \
- " -n inc Add inc to nice value\n" \
- " -m bytes Limit data segment, stack segment, locked physical pages,\n" \
- " and total of all segment per process to bytes bytes each\n" \
- " -d bytes Limit data segment\n" \
- " -o n Limit the number of open file descriptors per process to n\n" \
- " -p n Limit number of processes per uid to n\n" \
- " -f bytes Limit output file size to bytes bytes\n" \
- " -c bytes Limit core file size to bytes bytes\n" \
- " -v Verbose\n" \
- " -P Run prog in a new process group\n" \
- " -0 Close standard input\n" \
- " -1 Close standard output\n" \
- " -2 Close standard error"
+ "Change the process state and run specified program\n" \
+ "\nOptions:" \
+ "\n -u USER[:GRP] Set uid and gid" \
+ "\n -U USER[:GRP] Set $UID and $GID in environment" \
+ "\n -e DIR Set environment variables as specified by files" \
+ "\n in DIR: file=1st_line_of_file" \
+ "\n -/ DIR Chroot to DIR" \
+ "\n -n INC Add INC to nice value" \
+ "\n -m BYTES Limit data segment, stack segment, locked physical pages," \
+ "\n and total of all segment per process to BYTES each" \
+ "\n -d BYTES Limit data segment" \
+ "\n -o N Limit the number of open file descriptors per process to N" \
+ "\n -p N Limit number of processes per uid to N" \
+ "\n -f BYTES Limit output file size to BYTES" \
+ "\n -c BYTES Limit core file size to BYTES" \
+ "\n -v Verbose" \
+ "\n -P Run prog in a new process group" \
+ "\n -0 Close standard input" \
+ "\n -1 Close standard output" \
+ "\n -2 Close standard error" \
+
#define setuidgid_trivial_usage \
"account prog args"
#define setuidgid_full_usage \
@@ -385,26 +385,26 @@
"[-l lockbytes] [-m membytes] [-o openfiles] [-p processes] " \
"[-r residentbytes] [-s stackbytes] [-t cpusecs] prog args"
#define softlimit_full_usage \
- "Set soft resource limits, then run prog" \
- "\n\nOptions:\n" \
- " -m n Same as -d n -s n -l n -a n\n" \
- " -d n Limit the data segment per process to n bytes\n" \
- " -s n Limit the stack segment per process to n bytes\n" \
- " -l n Limit the locked physical pages per process to n bytes\n" \
- " -a n Limit the total of all segments per process to n bytes\n" \
- " -o n Limit the number of open file descriptors per process to n\n" \
- " -p n Limit the number of processes per uid to n\n" \
- "Options controlling file sizes:\n" \
- " -f n Limit output file sizes to n bytes\n" \
- " -c n Limit core file sizes to n bytes\n" \
- "Efficiency opts:\n" \
- " -r n Limit the resident set size to n bytes. This limit is not\n" \
- " enforced unless physical memory is full\n" \
- " -t n Limit the CPU time to n seconds. This limit is not enforced\n" \
- " except that the process receives a SIGXCPU signal after n seconds\n" \
- "\n" \
- "Some options may have no effect on some operating systems\n" \
- "n may be =, indicating that soft limit should be set equal to hard limit"
+ "Set soft resource limits, then run prog\n" \
+ "\nOptions:" \
+ "\n -m n Same as -d n -s n -l n -a n" \
+ "\n -d n Limit the data segment per process to n bytes" \
+ "\n -s n Limit the stack segment per process to n bytes" \
+ "\n -l n Limit the locked physical pages per process to n bytes" \
+ "\n -a n Limit the total of all segments per process to n bytes" \
+ "\n -o n Limit the number of open file descriptors per process to n" \
+ "\n -p n Limit the number of processes per uid to n" \
+ "\nOptions controlling file sizes:" \
+ "\n -f n Limit output file sizes to n bytes" \
+ "\n -c n Limit core file sizes to n bytes" \
+ "\nEfficiency opts:" \
+ "\n -r n Limit the resident set size to n bytes. This limit is not" \
+ "\n enforced unless physical memory is full" \
+ "\n -t n Limit the CPU time to n seconds. This limit is not enforced" \
+ "\n except that the process receives a SIGXCPU signal after n seconds" \
+ "\n" \
+ "\nSome options may have no effect on some operating systems" \
+ "\nn may be =, indicating that soft limit should be set equal to hard limit" \
#define chroot_trivial_usage \
"NEWROOT [COMMAND...]"
@@ -436,20 +436,20 @@
#define cmp_trivial_usage \
"[-l] [-s] FILE1 [FILE2" USE_DESKTOP(" [SKIP1 [SKIP2]") "]]"
#define cmp_full_usage \
- "Compares FILE1 vs stdin if FILE2 is not specified" \
- "\n\nOptions:\n" \
- " -l Write the byte numbers (decimal) and values (octal)\n" \
- " for all differing bytes\n" \
- " -s Quiet"
+ "Compares FILE1 vs stdin if FILE2 is not specified\n" \
+ "\nOptions:" \
+ "\n -l Write the byte numbers (decimal) and values (octal)" \
+ "\n for all differing bytes" \
+ "\n -s Quiet" \
#define comm_trivial_usage \
"[-123] FILE1 FILE2"
#define comm_full_usage \
- "Compare FILE1 to FILE2, or to stdin if - is specified" \
- "\n\nOptions:\n" \
- " -1 Suppress lines unique to FILE1\n" \
- " -2 Suppress lines unique to FILE2\n" \
- " -3 Suppress lines common to both files"
+ "Compare FILE1 to FILE2, or to stdin if - is specified\n" \
+ "\nOptions:" \
+ "\n -1 Suppress lines unique to FILE1" \
+ "\n -2 Suppress lines unique to FILE2" \
+ "\n -3 Suppress lines common to both files" \
#define bbconfig_trivial_usage \
""
@@ -465,13 +465,13 @@
#define chrt_trivial_usage \
"[OPTION]... [prio] [pid | command [arg]...]"
#define chrt_full_usage \
- "manipulate real-time attributes of a process" \
- "\n\nOptions:\n" \
- " -p operate on pid\n" \
- " -r set scheduling policy to SCHED_RR\n" \
- " -f set scheduling policy to SCHED_FIFO\n" \
- " -o set scheduling policy to SCHED_OTHER\n" \
- " -m show min and max priorities"
+ "Manipulate real-time attributes of a process\n" \
+ "\nOptions:" \
+ "\n -p Operate on pid" \
+ "\n -r Set scheduling policy to SCHED_RR" \
+ "\n -f Set scheduling policy to SCHED_FIFO" \
+ "\n -o Set scheduling policy to SCHED_OTHER" \
+ "\n -m Show min and max priorities" \
#define chrt_example_usage \
"$ chrt -r 4 sleep 900; x=$!\n" \
@@ -481,45 +481,45 @@
#define cp_trivial_usage \
"[OPTION]... SOURCE DEST"
#define cp_full_usage \
- "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY" \
- "\n\nOptions:" \
- "\n -a Same as -dpR" \
+ "Copy SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY\n" \
+ "\nOptions:" \
+ "\n -a Same as -dpR" \
USE_SELINUX( \
- "\n -c Preserves security context" \
+ "\n -c Preserve security context" \
) \
- "\n -d,-P Preserve links" \
- "\n -H,-L Dereference all symlinks (default)" \
- "\n -p Preserve file attributes if possible" \
- "\n -f Force overwrite" \
- "\n -i Prompt before overwrite" \
- "\n -R,-r Recurse directories" \
- "\n -l,-s Create (sym)links"
+ "\n -d,-P Preserve links" \
+ "\n -H,-L Dereference all symlinks (default)" \
+ "\n -p Preserve file attributes if possible" \
+ "\n -f Force overwrite" \
+ "\n -i Prompt before overwrite" \
+ "\n -R,-r Recurse directories" \
+ "\n -l,-s Create (sym)links" \
#define cpio_trivial_usage \
"-[dimtuv][F cpiofile]"
#define cpio_full_usage \
"Extract or list files from a cpio archive\n" \
- "Main operation mode:\n" \
- " d Make leading directories\n" \
- " i Extract\n" \
- " m Preserve mtime\n" \
- " t List\n" \
- " v Verbose\n" \
- " u Unconditional overwrite\n" \
- " F Input from file"
+ "Main operation mode:" \
+ "\n d Make leading directories" \
+ "\n i Extract" \
+ "\n m Preserve mtime" \
+ "\n t List" \
+ "\n v Verbose" \
+ "\n u Unconditional overwrite" \
+ "\n F Input from file" \
#define crond_trivial_usage \
"-fbS -l N " USE_DEBUG_CROND_OPTION("-d N ") "-L LOGFILE -c DIR"
#define crond_full_usage \
- " -f Foreground\n" \
- " -b Background (default)\n" \
- " -S Log to syslog (default)\n" \
- " -l Set log level. 0 is the most verbose, default 8\n" \
+ " -f Foreground" \
+ "\n -b Background (default)" \
+ "\n -S Log to syslog (default)" \
+ "\n -l Set log level. 0 is the most verbose, default 8" \
USE_DEBUG_CROND_OPTION( \
- " -d Set log level, log to stderr\n" \
+ "\n -d Set log level, log to stderr" \
) \
- " -L Log to file\n" \
- " -c Working dir"
+ "\n -L Log to file" \
+ "\n -c Working dir" \
#define crontab_trivial_usage \
"[-c DIR] [-u USER] [-ler]|[FILE]"
@@ -534,22 +534,23 @@
#define cryptpw_trivial_usage \
"[-a des|md5] [string]"
#define cryptpw_full_usage \
- "Outputs crypted string.\n" \
- "If string isn't supplied on cmdline, reads it from stdin.\n" \
- "\nOptions:" \
- "\n -a Algorithm to use (default: md5)"
+ "Output crypted string.\n" \
+ "If string isn't supplied on cmdline, read it from stdin.\n" \
+ "\nOptions:" \
+ "\n -a Algorithm to use (default: md5)" \
#define cut_trivial_usage \
"[OPTION]... [FILE]..."
#define cut_full_usage \
- "Print selected fields from each input FILE to standard output" \
- "\n\nOptions:\n" \
- " -b LIST Output only bytes from LIST\n" \
- " -c LIST Output only characters from LIST\n" \
- " -d CHAR Use CHAR instead of tab as the field delimiter\n" \
- " -s Output only the lines containing delimiter\n" \
- " -f N Print only these fields\n" \
- " -n Ignored"
+ "Print selected fields from each input FILE to standard output\n" \
+ "\nOptions:" \
+ "\n -b LIST Output only bytes from LIST" \
+ "\n -c LIST Output only characters from LIST" \
+ "\n -d CHAR Use CHAR instead of tab as the field delimiter" \
+ "\n -s Output only the lines containing delimiter" \
+ "\n -f N Print only these fields" \
+ "\n -n Ignored" \
+
#define cut_example_usage \
"$ echo \"Hello world\" | cut -f 1 -d ' '\n" \
"Hello\n" \
@@ -559,20 +560,21 @@
#define date_trivial_usage \
"[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]"
#define date_full_usage \
- "Display current time in the given FORMAT, or set system date" \
- "\n\nOptions:\n" \
- " -R Outputs RFC-822 compliant date string\n" \
- " -d STRING Displays time described by STRING, not 'now'\n" \
+ "Display current time in the given FORMAT, or set system date\n" \
+ "\nOptions:" \
+ "\n -R Output RFC-822 compliant date string" \
+ "\n -d STRING Display time described by STRING, not 'now'" \
USE_FEATURE_DATE_ISOFMT( \
- " -I[TIMESPEC] Outputs an ISO-8601 compliant date/time string\n" \
- " TIMESPEC='date' (or missing) for date only,\n" \
- " 'hours', 'minutes', or 'seconds' for date and\n" \
- " time to the indicated precision\n" \
- " -D hint Use 'hint' as date format, via strptime()\n" \
+ "\n -I[TIMESPEC] Output an ISO-8601 compliant date/time string" \
+ "\n TIMESPEC='date' (or missing) for date only," \
+ "\n 'hours', 'minutes', or 'seconds' for date and" \
+ "\n time to the indicated precision" \
+ "\n -D hint Use 'hint' as date format, via strptime()" \
) \
- " -s STRING Sets time described by STRING\n" \
- " -r FILE Displays the last modification time of FILE\n" \
- " -u Prints or sets Coordinated Universal Time"
+ "\n -s STRING Set time described by STRING" \
+ "\n -r FILE Display the last modification time of FILE" \
+ "\n -u Print or sets Coordinated Universal Time" \
+
#define date_example_usage \
"$ date\n" \
"Wed Apr 12 18:52:41 MDT 2000\n"
@@ -580,15 +582,15 @@
#define dc_trivial_usage \
"expression..."
#define dc_full_usage \
- "This is a Tiny RPN calculator that understands the\n" \
- "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \
- "**, exp, and, or, not, eor.\n" \
- "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16." \
- "\n\nOptions:\n" \
- "p - Prints the value on the top of the stack, without altering the stack\n" \
- "f - Prints the entire contents of the stack without altering anything\n" \
- "o - Pops the value off the top of the stack and uses it to set the output radix\n" \
- " Only 10 and 16 are supported"
+ "This is a Tiny RPN calculator that understands the following operations:\n" \
+ "+, add, -, sub, *, mul, /, div, %, mod, **, exp, and, or, not, eor.\n" \
+ "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \
+ "\nOptions:" \
+ "\np - Print the value on the top of the stack, without altering the stack" \
+ "\nf - Print the entire contents of the stack without altering anything" \
+ "\no - Pop the value off the top of the stack and use it to set the output radix" \
+ "\n Only 10 and 16 are supported" \
+
#define dc_example_usage \
"$ dc 2 2 + p\n" \
"4\n" \
@@ -605,25 +607,26 @@
"[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \
" [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]")
#define dd_full_usage \
- "Copy a file with converting and formatting" \
- "\n\nOptions:\n" \
- " if=FILE Read from FILE instead of stdin\n" \
- " of=FILE Write to FILE instead of stdout\n" \
- " bs=N Read and write N bytes at a time\n" \
+ "Copy a file with converting and formatting\n" \
+ "\nOptions:" \
+ "\n if=FILE Read from FILE instead of stdin" \
+ "\n of=FILE Write to FILE instead of stdout" \
+ "\n bs=N Read and write N bytes at a time" \
USE_FEATURE_DD_IBS_OBS( \
- " ibs=N Read N bytes at a time\n") \
+ "\n ibs=N Read N bytes at a time") \
USE_FEATURE_DD_IBS_OBS( \
- " obs=N Write N bytes at a time\n") \
- " count=N Copy only N input blocks\n" \
- " skip=N Skip N input blocks\n" \
- " seek=N Skip N output blocks\n" \
+ "\n obs=N Write N bytes at a time") \
+ "\n count=N Copy only N input blocks" \
+ "\n skip=N Skip N input blocks" \
+ "\n seek=N Skip N output blocks" \
USE_FEATURE_DD_IBS_OBS( \
- " conv=notrunc Don't truncate output file\n" \
- " conv=noerror Continue after read errors\n" \
- " conv=sync Pad blocks with zeros\n") \
- "\n" \
- "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \
- "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)"
+ "\n conv=notrunc Don't truncate output file" \
+ "\n conv=noerror Continue after read errors" \
+ "\n conv=sync Pad blocks with zeros") \
+ "\n" \
+ "\nNumbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024)," \
+ "\nMD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" \
+
#define dd_example_usage \
"$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \
"4+0 records in\n" \
@@ -646,19 +649,19 @@
"Delete user USER from the system"
#define devfsd_trivial_usage \
- "mntpnt [-v]" \
- USE_DEVFSD_FG_NP("[-fg][-np]")
+ "mntpnt [-v]" USE_DEVFSD_FG_NP("[-fg][-np]")
#define devfsd_full_usage \
- "Manage devfs permissions and old device name symlinks" \
- "\n\nOptions:" \
- "\n mntpnt The mount point where devfs is mounted" \
- "\n -v Print the protocol version numbers for devfsd" \
- "\n and the kernel-side protocol version and exit" \
+ "Manage devfs permissions and old device name symlinks\n" \
+ "\nOptions:" \
+ "\n mntpnt The mount point where devfs is mounted" \
+ "\n -v Print the protocol version numbers for devfsd" \
+ "\n and the kernel-side protocol version and exit" \
USE_DEVFSD_FG_NP( \
- "\n -fg Run in foreground" \
- "\n -np Exit after parsing the configuration file" \
- "\n and processing synthetic REGISTER events," \
- "\n do not poll for events")
+ "\n -fg Run in foreground" \
+ "\n -np Exit after parsing the configuration file" \
+ "\n and processing synthetic REGISTER events," \
+ "\n do not poll for events" \
+ )
/* -k is accepted but ignored for !HUMAN_READABLE,
* but we won't mention this (unimportant) */
@@ -672,15 +675,15 @@
USE_FEATURE_HUMAN_READABLE("hmk") USE_FEATURE_DF_INODE("i") \
DF_HAS_OPTIONS("] ") "[FILESYSTEM...]"
#define df_full_usage \
- "Print filesystem usage statistics" \
- DF_HAS_OPTIONS("\n\nOptions:") \
+ "Print filesystem usage statistics\n" \
+ DF_HAS_OPTIONS("\nOptions:") \
USE_FEATURE_HUMAN_READABLE( \
- "\n -h Human readable (e.g. 1K 243M 2G)" \
- "\n -m 1024*1024 blocks" \
- "\n -k 1024 blocks" \
+ "\n -h Human readable (e.g. 1K 243M 2G)" \
+ "\n -m 1024*1024 blocks" \
+ "\n -k 1024 blocks" \
) \
USE_FEATURE_DF_INODE( \
- "\n -i Inodes" \
+ "\n -i Inodes" \
)
#define df_example_usage \
"$ df\n" \
@@ -705,22 +708,22 @@
"[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2"
#define diff_full_usage \
"Compare files line by line and output the differences between them.\n" \
- "This diff implementation only supports unified diffs." \
- "\n\nOptions:\n" \
- " -a Treat all files as text\n" \
- " -b Ignore changes in the amount of whitespace\n" \
- " -d Try hard to find a smaller set of changes\n" \
- " -i Ignore case differences\n" \
- " -L Use LABEL instead of the filename in the unified header\n" \
- " -N Treat absent files as empty\n" \
- " -q Output only whether files differ\n" \
- " -r Recursively compare subdirectories\n" \
- " -S Start with FILE when comparing directories\n" \
- " -T Make tabs line up by prefixing a tab when necessary\n" \
- " -s Report when two files are the same\n" \
- " -t Expand tabs to spaces in output\n" \
- " -U Output LINES lines of context\n" \
- " -w Ignore all whitespace"
+ "This implementation supports unified diffs only.\n" \
+ "\nOptions:" \
+ "\n -a Treat all files as text" \
+ "\n -b Ignore changes in the amount of whitespace" \
+ "\n -d Try hard to find a smaller set of changes" \
+ "\n -i Ignore case differences" \
+ "\n -L Use LABEL instead of the filename in the unified header" \
+ "\n -N Treat absent files as empty" \
+ "\n -q Output only whether files differ" \
+ "\n -r Recursively compare subdirectories" \
+ "\n -S Start with FILE when comparing directories" \
+ "\n -T Make tabs line up by prefixing a tab when necessary" \
+ "\n -s Report when two files are the same" \
+ "\n -t Expand tabs to spaces in output" \
+ "\n -U Output LINES lines of context" \
+ "\n -w Ignore all whitespace" \
#define dirname_trivial_usage \
"FILENAME"
@@ -735,22 +738,22 @@
#define dmesg_trivial_usage \
"[-c] [-n LEVEL] [-s SIZE]"
#define dmesg_full_usage \
- "Print or control the kernel ring buffer" \
- "\n\nOptions:\n" \
- " -c Clear ring buffer after printing\n" \
- " -n LEVEL Set console logging level\n" \
- " -s SIZE Buffer size"
+ "Print or control the kernel ring buffer\n" \
+ "\nOptions:" \
+ "\n -c Clear ring buffer after printing" \
+ "\n -n LEVEL Set console logging level" \
+ "\n -s SIZE Buffer size" \
#define dnsd_trivial_usage \
"[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]"
#define dnsd_full_usage \
- "Small static DNS server daemon" \
- "\n\nOptions:\n" \
- " -c Config filename\n" \
- " -t TTL in seconds\n" \
- " -p Listening port\n" \
- " -i Listening ip (default all)\n" \
- " -d Daemonize"
+ "Small static DNS server daemon\n" \
+ "\nOptions:" \
+ "\n -c Config filename" \
+ "\n -t TTL in seconds" \
+ "\n -p Listening port" \
+ "\n -i Listening ip (default all)" \
+ "\n -d Daemonize" \
#define dos2unix_trivial_usage \
"[option] [FILE]"
@@ -759,31 +762,32 @@
"When no file is given, use stdin/stdout.\n" \
"\nOptions:" \
"\n -u dos2unix" \
- "\n -d unix2dos"
+ "\n -d unix2dos" \
#define dpkg_trivial_usage \
"[-ilCPru] [-F option] package_name"
#define dpkg_full_usage \
- "Install, remove and manage Debian packages" \
- "\n\nOptions:\n" \
- " -i Install the package\n" \
- " -l List of installed packages\n" \
- " -C Configure an unpackaged package\n" \
- " -F depends Ignore dependency problems\n" \
- " -P Purge all files of a package\n" \
- " -r Remove all but the configuration files for a package\n" \
- " -u Unpack a package, but don't configure it"
+ "Install, remove and manage Debian packages\n" \
+ "\nOptions:" \
+ "\n -i Install the package" \
+ "\n -l List of installed packages" \
+ "\n -C Configure an unpackaged package" \
+ "\n -F depends Ignore dependency problems" \
+ "\n -P Purge all files of a package" \
+ "\n -r Remove all but the configuration files for a package" \
+ "\n -u Unpack a package, but don't configure it" \
#define dpkg_deb_trivial_usage \
"[-cefxX] FILE [argument]"
#define dpkg_deb_full_usage \
- "Perform actions on Debian packages (.debs)" \
- "\n\nOptions:\n" \
- " -c List contents of filesystem tree\n" \
- " -e Extract control files to [argument] directory\n" \
- " -f Display control field name starting with [argument]\n" \
- " -x Extract packages filesystem tree to directory\n" \
- " -X Verbose extract"
+ "Perform actions on Debian packages (.debs)\n" \
+ "\nOptions:" \
+ "\n -c List contents of filesystem tree" \
+ "\n -e Extract control files to [argument] directory" \
+ "\n -f Display control field name starting with [argument]" \
+ "\n -x Extract packages filesystem tree to directory" \
+ "\n -X Verbose extract" \
+
#define dpkg_deb_example_usage \
"$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n"
@@ -794,22 +798,23 @@
"Disk space is printed in units of " \
USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \
SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \
- " bytes." \
- "\n\nOptions:\n" \
- " -a Show file sizes too\n" \
- " -H Follow symlinks on command line\n" \
- " -L Follow all symlinks\n" \
- " -d N Limit output to directories (and files with -a) of depth < N\n" \
- " -c Show grand total\n" \
- " -l Count sizes many times if hard linked\n" \
- " -s Display only a total for each argument\n" \
- " -x Skip directories on different filesystems\n" \
+ " bytes.\n" \
+ "\nOptions:" \
+ "\n -a Show file sizes too" \
+ "\n -H Follow symlinks on command line" \
+ "\n -L Follow all symlinks" \
+ "\n -d N Limit output to directories (and files with -a) of depth < N" \
+ "\n -c Show grand total" \
+ "\n -l Count sizes many times if hard linked" \
+ "\n -s Display only a total for each argument" \
+ "\n -x Skip directories on different filesystems" \
USE_FEATURE_HUMAN_READABLE( \
- " -h Sizes in human readable format (e.g., 1K 243M 2G )\n" \
- " -m Sizes in megabytes\n" \
+ "\n -h Sizes in human readable format (e.g., 1K 243M 2G )" \
+ "\n -m Sizes in megabytes" \
) \
- " -k Sizes in kilobytes" \
- USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)")
+ "\n -k Sizes in kilobytes" \
+ USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K(" (default)") \
+
#define du_example_usage \
"$ du\n" \
"16 ./CVS\n" \
@@ -833,17 +838,17 @@
#define dumpleases_trivial_usage \
"[-r|-a] [-f LEASEFILE]"
#define dumpleases_full_usage \
- "Display DHCP leases granted by udhcpd" \
- "\n\nOptions:\n" \
+ "Display DHCP leases granted by udhcpd\n" \
+ "\nOptions:" \
USE_GETOPT_LONG( \
- " -f,--file=FILE Leases file to load\n" \
- " -r,--remaining Interpret lease times as time remaining\n" \
- " -a,--absolute Interpret lease times as expire time" \
+ "\n -f,--file=FILE Leases file to load" \
+ "\n -r,--remaining Interpret lease times as time remaining" \
+ "\n -a,--absolute Interpret lease times as expire time" \
) \
SKIP_GETOPT_LONG( \
- " -f FILE Leases file to load\n" \
- " -r Interpret lease times as time remaining\n" \
- " -a Interpret lease times as expire time" \
+ "\n -f FILE Leases file to load" \
+ "\n -r Interpret lease times as time remaining" \
+ "\n -a Interpret lease times as expire time" \
)
#define e2fsck_trivial_usage \
@@ -852,29 +857,29 @@
"[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \
"[-E extended-options] device"
#define e2fsck_full_usage \
- "Check ext2/ext3 file system" \
- "\n\nOptions:\n" \
- " -p Automatic repair (no questions)\n" \
- " -n Make no changes to the filesystem\n" \
- " -y Assume 'yes' to all questions\n" \
- " -c Check for bad blocks and add them to the badblock list\n" \
- " -f Force checking even if filesystem is marked clean\n" \
- " -v Verbose\n" \
- " -b superblock Use alternative superblock\n" \
- " -B blocksize Force blocksize when looking for superblock\n" \
- " -j journal Set location of the external journal\n" \
- " -l file Add to badblocks list\n" \
- " -L file Set badblocks list"
+ "Check ext2/ext3 file system\n" \
+ "\nOptions:" \
+ "\n -p Automatic repair (no questions)" \
+ "\n -n Make no changes to the filesystem" \
+ "\n -y Assume 'yes' to all questions" \
+ "\n -c Check for bad blocks and add them to the badblock list" \
+ "\n -f Force checking even if filesystem is marked clean" \
+ "\n -v Verbose" \
+ "\n -b superblock Use alternative superblock" \
+ "\n -B blocksize Force blocksize when looking for superblock" \
+ "\n -j journal Set location of the external journal" \
+ "\n -l file Add to badblocks list" \
+ "\n -L file Set badblocks list" \
#define echo_trivial_usage \
USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG...]"
#define echo_full_usage \
"Print the specified ARGs to stdout" \
- USE_FEATURE_FANCY_ECHO( \
- "\n\nOptions:\n" \
- " -n Suppress trailing newline\n" \
- " -e Interpret backslash-escaped characters (i.e., \\t=tab)\n" \
- " -E Disable interpretation of backslash-escaped characters" \
+ USE_FEATURE_FANCY_ECHO( "\n" \
+ "\nOptions:" \
+ "\n -n Suppress trailing newline" \
+ "\n -e Interpret backslash-escaped characters (i.e., \\t=tab)" \
+ "\n -E Disable interpretation of backslash-escaped characters" \
)
#define echo_example_usage \
"$ echo \"Erik is cool\"\n" \
@@ -889,13 +894,13 @@
#define eject_trivial_usage \
"[-t] [-T] [DEVICE]"
#define eject_full_usage \
- "Eject specified DEVICE (or default /dev/cdrom)" \
- "\n\nOptions:\n" \
- USE_FEATURE_EJECT_SCSI( \
- " -s scsi device\n" \
- ) \
- " -t Close tray\n" \
- " -T Open/close tray (toggle)"
+ "Eject specified DEVICE (or default /dev/cdrom)\n" \
+ "\nOptions:" \
+ USE_FEATURE_EJECT_SCSI( \
+ "\n -s SCSI device" \
+ ) \
+ "\n -t Close tray" \
+ "\n -T Open/close tray (toggle)" \
#define ed_trivial_usage ""
#define ed_full_usage ""
@@ -904,40 +909,41 @@
"[-iu] [-] [name=value]... [command]"
#define env_full_usage \
"Print the current environment or run a program after setting\n" \
- "up the specified environment" \
- "\n\nOptions:\n" \
- " -, -i Start with an empty environment\n" \
- " -u Remove variable from the environment"
+ "up the specified environment\n" \
+ "\nOptions:" \
+ "\n -, -i Start with an empty environment" \
+ "\n -u Remove variable from the environment" \
#define ether_wake_trivial_usage \
"[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC"
#define ether_wake_full_usage \
"Send a magic packet to wake up sleeping machines.\n" \
"MAC must be a station address (00:11:22:33:44:55) or\n" \
- "a hostname with a known 'ethers' entry." \
- "\n\nOptions:\n" \
- " -b Send wake-up packet to the broadcast address\n" \
- " -i iface Use interface ifname instead of the default \"eth0\"\n" \
- " -p pass Append the four or six byte password PW to the packet"
+ "a hostname with a known 'ethers' entry.\n" \
+ "\nOptions:" \
+ "\n -b Send wake-up packet to the broadcast address" \
+ "\n -i iface Interface to use (default eth0)" \
+ "\n -p pass Append four or six byte password PW to the packet" \
#define expand_trivial_usage \
"[-i] [-t NUM] [FILE|-]"
#define expand_full_usage \
- "Convert tabs to spaces, writing to standard output." \
- "\n\nOptions:" \
+ "Convert tabs to spaces, writing to standard output.\n" \
+ "\nOptions:" \
USE_FEATURE_EXPAND_LONG_OPTIONS( \
- "\n -i,--initial Do not convert tabs after non blanks" \
- "\n -t,--tabs=N Tabstops every N chars" \
+ "\n -i,--initial Do not convert tabs after non blanks" \
+ "\n -t,--tabs=N Tabstops every N chars" \
) \
SKIP_FEATURE_EXPAND_LONG_OPTIONS( \
- "\n -i Do not convert tabs after non blanks" \
- "\n -t Tabstops every N chars" \
+ "\n -i Do not convert tabs after non blanks" \
+ "\n -t Tabstops every N chars" \
)
#define expr_trivial_usage \
"EXPRESSION"
#define expr_full_usage \
- "Print the value of EXPRESSION to standard output.\n\n" \
+ "Print the value of EXPRESSION to standard output.\n" \
+ "\n" \
"EXPRESSION may be:\n" \
" ARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \
" ARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \
@@ -960,7 +966,8 @@
" quote TOKEN Interpret TOKEN as a string, even if\n" \
" it is a keyword like 'match' or an\n" \
" operator like '/'\n" \
- " (EXPRESSION) Value of EXPRESSION\n\n" \
+ " (EXPRESSION) Value of EXPRESSION\n" \
+ "\n" \
"Beware that many operators need to be escaped or quoted for shells.\n" \
"Comparisons are arithmetic if both ARGs are numbers, else\n" \
"lexicographical. Pattern matches return the string matched between\n" \
@@ -970,13 +977,13 @@
#define fakeidentd_trivial_usage \
"[-fiw] [-b ADDR] [STRING]"
#define fakeidentd_full_usage \
- "Provide fake ident (auth) service" \
- "\n\nOptions:" \
- "\n -f Run in foreground" \
- "\n -i Inetd mode" \
- "\n -w Inetd 'wait' mode" \
- "\n -b ADDR Bind to specified address" \
- "\n STRING Ident answer string (default is 'nobody')"
+ "Provide fake ident (auth) service\n" \
+ "\nOptions:" \
+ "\n -f Run in foreground" \
+ "\n -i Inetd mode" \
+ "\n -w Inetd 'wait' mode" \
+ "\n -b ADDR Bind to specified address" \
+ "\n STRING Ident answer string (default is 'nobody')" \
#define false_trivial_usage \
""
@@ -991,6 +998,7 @@
"[options] [mode]"
#define fbset_full_usage \
"Show and modify frame buffer settings"
+
#define fbset_example_usage \
"$ fbset\n" \
"mode \"1024x768-76\"\n" \
@@ -1009,9 +1017,9 @@
#define fdformat_trivial_usage \
"[-n] DEVICE"
#define fdformat_full_usage \
- "Format floppy disk" \
- "\n\nOptions:\n" \
- " -n Don't verify after format"
+ "Format floppy disk\n" \
+ "\nOptions:" \
+ "\n -n Don't verify after format" \
/* Looks like someone forgot to add this to config system */
#ifndef ENABLE_FEATURE_FDISK_BLKSIZE
@@ -1038,15 +1046,15 @@
#define fetchmail_trivial_usage \
"[-w timeout] [-U user] -P password [-X] [-t] [-z] server[:port] maildir [prog]"
#define fetchmail_full_usage \
- "Fetch content of remote mailbox to local Maildir." \
- "\n\nOptions:\n" \
- " -w timeout Set timeout on network operations\n" \
- " -U username Authenticate with specified username/password\n" \
- " -P password\n" \
- " -X Use openssl connection helper for secured servers\n" \
- " -t Get only headers\n" \
- " -z Delete messages on server\n" \
- " prog Run prog <message_file> on message delivery"
+ "Fetch content of remote mailbox to local Maildir.\n" \
+ "\nOptions:" \
+ "\n -w timeout Set timeout on network operations" \
+ "\n -U username Authenticate with specified username/password" \
+ "\n -P password" \
+ "\n -X Use openssl connection helper for secured servers" \
+ "\n -t Get only headers" \
+ "\n -z Delete messages on server" \
+ "\n prog Run prog <message_file> on message delivery" \
#define findfs_trivial_usage \
"LABEL=label or UUID=uuid"
@@ -1121,11 +1129,11 @@
"[-bs] [-w WIDTH] [FILE]"
#define fold_full_usage \
"Wrap input lines in each FILE (standard input by default), writing to\n" \
- "standard output" \
- "\n\nOptions:\n" \
- " -b Count bytes rather than columns\n" \
- " -s Break at spaces\n" \
- " -w Use WIDTH columns instead of 80"
+ "standard output\n" \
+ "\nOptions:" \
+ "\n -b Count bytes rather than columns" \
+ "\n -s Break at spaces" \
+ "\n -w Use WIDTH columns instead of 80" \
#define free_trivial_usage \
""
@@ -1148,66 +1156,66 @@
#define fsck_trivial_usage \
"[-ANPRTV] [-C fd] [-t fstype] [fs-options] [filesys...]"
#define fsck_full_usage \
- "Check and repair filesystems" \
- "\n\nOptions:\n" \
- " -A Walk /etc/fstab and check all filesystems\n" \
- " -N Don't execute, just show what would be done\n" \
- " -P When using -A, check filesystems in parallel\n" \
- " -R When using -A, skip the root filesystem\n" \
- " -T Don't show title on startup\n" \
- " -V Verbose\n" \
- " -C n Write status information to specified filedescriptor\n" \
- " -t type List of filesystem types to check"
+ "Check and repair filesystems\n" \
+ "\nOptions:" \
+ "\n -A Walk /etc/fstab and check all filesystems" \
+ "\n -N Don't execute, just show what would be done" \
+ "\n -P With -A, check filesystems in parallel" \
+ "\n -R With -A, skip the root filesystem" \
+ "\n -T Don't show title on startup" \
+ "\n -V Verbose" \
+ "\n -C n Write status information to specified filedescriptor" \
+ "\n -t type List of filesystem types to check" \
#define fsck_minix_trivial_usage \
"[-larvsmf] /dev/name"
#define fsck_minix_full_usage \
- "Perform a consistency check for MINIX filesystems" \
- "\n\nOptions:\n" \
- " -l List all filenames\n" \
- " -r Perform interactive repairs\n" \
- " -a Perform automatic repairs\n" \
- " -v Verbose\n" \
- " -s Output super-block information\n" \
- " -m Activate MINIX-like \"mode not cleared\" warnings\n" \
- " -f Force file system check"
+ "Perform a consistency check for MINIX filesystems\n" \
+ "\nOptions:" \
+ "\n -l List all filenames" \
+ "\n -r Perform interactive repairs" \
+ "\n -a Perform automatic repairs" \
+ "\n -v Verbose" \
+ "\n -s Output super-block information" \
+ "\n -m Activate MINIX-like \"mode not cleared\" warnings" \
+ "\n -f Force file system check" \
#define ftpget_trivial_usage \
"[options] remote-host local-file remote-file"
#define ftpget_full_usage \
- "Retrieve a remote file via FTP" \
- "\n\nOptions:\n" \
+ "Retrieve a remote file via FTP\n" \
+ "\nOptions:" \
USE_GETOPT_LONG( \
- " -c,--continue Continue previous transfer\n" \
- " -v,--verbose Verbose\n" \
- " -u,--username Username\n" \
- " -p,--password Password\n" \
- " -P,--port Port number" \
+ "\n -c,--continue Continue previous transfer" \
+ "\n -v,--verbose Verbose" \
+ "\n -u,--username Username" \
+ "\n -p,--password Password" \
+ "\n -P,--port Port number" \
) \
SKIP_GETOPT_LONG( \
- " -c Continue previous transfer\n" \
- " -v Verbose\n" \
- " -u Username\n" \
- " -p Password\n" \
- " -P Port number" \
+ "\n -c Continue previous transfer" \
+ "\n -v Verbose" \
+ "\n -u Username" \
+ "\n -p Password" \
+ "\n -P Port number" \
)
#define ftpput_trivial_usage \
"[options] remote-host remote-file local-file"
#define ftpput_full_usage \
- "Store a local file on a remote machine via FTP" \
- "\n\nOptions:\n" \
+ "Store a local file on a remote machine via FTP\n" \
+ "\nOptions:" \
USE_GETOPT_LONG( \
- " -v,--verbose Verbose\n" \
- " -u,--username Username\n" \
- " -p,--password Password\n" \
- " -P,--port Port number" \
+ "\n -v,--verbose Verbose" \
+ "\n -u,--username Username" \
+ "\n -p,--password Password" \
+ "\n -P,--port Port number" \
) \
SKIP_GETOPT_LONG( \
- " -v Verbose\n" \
- " -u Username\n" \
- " -p Password\n" \
- " -P Port number" \
+ "\n -v Verbose" \
+ "\n -u Username" \
+ "\n -p Password" \
+ "\n -P Port number" \
)
#define fuser_trivial_usage \
@@ -1220,7 +1228,7 @@
"\n -6 Search only IPv6 space" \
"\n -s Silent: just exit with 0 if any processes are found" \
"\n -k Kill found processes (otherwise display PIDs)" \
- "\n -SIGNAL Signal to send (default: TERM)"
+ "\n -SIGNAL Signal to send (default: TERM)" \
#define getenforce_trivial_usage
#define getenforce_full_usage
@@ -1230,26 +1238,26 @@
#define getopt_full_usage \
"Parse command options\n" \
USE_GETOPT_LONG( \
- " -a,--alternative Allow long options starting with single -\n" \
- " -l,--longoptions=longopts Long options to be recognized\n" \
- " -n,--name=progname The name under which errors are reported\n" \
- " -o,--options=optstring Short options to be recognized\n" \
- " -q,--quiet Disable error reporting by getopt(3)\n" \
- " -Q,--quiet-output No normal output\n" \
- " -s,--shell=shell Set shell quoting conventions\n" \
- " -T,--test Test for getopt(1) version\n" \
- " -u,--unquoted Don't quote the output" \
+ "\n -a,--alternative Allow long options starting with single -" \
+ "\n -l,--longoptions=longopts Long options to be recognized" \
+ "\n -n,--name=progname The name under which errors are reported" \
+ "\n -o,--options=optstring Short options to be recognized" \
+ "\n -q,--quiet Disable error reporting by getopt(3)" \
+ "\n -Q,--quiet-output No normal output" \
+ "\n -s,--shell=shell Set shell quoting conventions" \
+ "\n -T,--test Test for getopt(1) version" \
+ "\n -u,--unquoted Don't quote the output" \
) \
SKIP_GETOPT_LONG( \
- " -a Allow long options starting with single -\n" \
- " -l longopts Long options to be recognized\n" \
- " -n progname The name under which errors are reported\n" \
- " -o optstring Short options to be recognized\n" \
- " -q Disable error reporting by getopt(3)\n" \
- " -Q No normal output\n" \
- " -s shell Set shell quoting conventions\n" \
- " -T Test for getopt(1) version\n" \
- " -u Don't quote the output" \
+ "\n -a Allow long options starting with single -" \
+ "\n -l longopts Long options to be recognized" \
+ "\n -n progname The name under which errors are reported" \
+ "\n -o optstring Short options to be recognized" \
+ "\n -q Disable error reporting by getopt(3)" \
+ "\n -Q No normal output" \
+ "\n -s shell Set shell quoting conventions" \
+ "\n -T Test for getopt(1) version" \
+ "\n -u Don't quote the output" \
)
#define getopt_example_usage \
"$ cat getopt.test\n" \
@@ -1278,21 +1286,21 @@
" -a Show all SELinux booleans"
#define getty_trivial_usage \
- "[OPTIONS]... baud_rate,... line [termtype]"
+ "[OPTIONS] BAUD_RATE TTY [TERMTYPE]"
#define getty_full_usage \
- "Open a tty, prompt for a login name, then invoke /bin/login" \
- "\n\nOptions:\n" \
- " -h Enable hardware (RTS/CTS) flow control\n" \
- " -i Do not display /etc/issue before running login\n" \
- " -L Local line, do not do carrier detect\n" \
- " -m Get baud rate from modem's CONNECT status message\n" \
- " -w Wait for a CR or LF before sending /etc/issue\n" \
- " -n Do not prompt the user for a login name\n" \
- " -f issue_file Display issue_file instead of /etc/issue\n" \
- " -l login_app Invoke login_app instead of /bin/login\n" \
- " -t timeout Terminate after timeout if no username is read\n" \
- " -I initstring Sets the init string to send before anything else\n" \
- " -H login_host Log login_host into the utmp file as the hostname"
+ "Open a tty, prompt for a login name, then invoke /bin/login\n" \
+ "\nOptions:" \
+ "\n -h Enable hardware (RTS/CTS) flow control" \
+ "\n -i Do not display /etc/issue before running login" \
+ "\n -L Local line, do not do carrier detect" \
+ "\n -m Get baud rate from modem's CONNECT status message" \
+ "\n -w Wait for a CR or LF before sending /etc/issue" \
+ "\n -n Do not prompt the user for a login name" \
+ "\n -f issue_file Display issue_file instead of /etc/issue" \
+ "\n -l login_app Invoke login_app instead of /bin/login" \
+ "\n -t timeout Terminate after timeout if no username is read" \
+ "\n -I initstring Init string to send before anything else" \
+ "\n -H login_host Log login_host into the utmp file as the hostname" \
#define grep_trivial_usage \
"[-HhrilLnqvso" \
@@ -1302,32 +1310,32 @@
USE_FEATURE_GREP_CONTEXT("ABC") \
"] PATTERN [FILEs...]"
#define grep_full_usage \
- "Search for PATTERN in each FILE or standard input" \
- "\n\nOptions:" \
- "\n -H Prefix output lines with filename where match was found" \
- "\n -h Suppress the prefixing filename on output" \
- "\n -r Recurse subdirectories" \
- "\n -i Ignore case distinctions" \
- "\n -l List names of files that match" \
- "\n -L List names of files that do not match" \
- "\n -n Print line number with output lines" \
- "\n -q Quiet. Returns 0 if PATTERN was found, 1 otherwise" \
- "\n -v Select non-matching lines" \
- "\n -s Suppress file open/read error messages" \
- "\n -c Only print count of matching lines" \
- "\n -o Show only the part of a line that matches PATTERN" \
- "\n -m MAX Match up to MAX times per file" \
+ "Search for PATTERN in each FILE or standard input\n" \
+ "\nOptions:" \
+ "\n -H Prefix output lines with filename where match was found" \
+ "\n -h Suppress the prefixing filename on output" \
+ "\n -r Recurse subdirectories" \
+ "\n -i Ignore case distinctions" \
+ "\n -l List names of files that match" \
+ "\n -L List names of files that do not match" \
+ "\n -n Print line number with output lines" \
+ "\n -q Quiet. Return 0 if PATTERN is found, 1 otherwise" \
+ "\n -v Select non-matching lines" \
+ "\n -s Suppress file open/read error messages" \
+ "\n -c Only print count of matching lines" \
+ "\n -o Show only the part of a line that matches PATTERN" \
+ "\n -m MAX Match up to MAX times per file" \
USE_DESKTOP( \
- "\n -w Match whole words only") \
- "\n -F PATTERN is a set of newline-separated strings" \
+ "\n -w Match whole words only") \
+ "\n -F PATTERN is a set of newline-separated strings" \
USE_FEATURE_GREP_EGREP_ALIAS( \
- "\n -E PATTERN is an extended regular expression") \
- "\n -e PTRN Pattern to match" \
- "\n -f FILE Read pattern from file" \
+ "\n -E PATTERN is an extended regular expression") \
+ "\n -e PTRN Pattern to match" \
+ "\n -f FILE Read pattern from file" \
USE_FEATURE_GREP_CONTEXT( \
- "\n -A Print NUM lines of trailing context" \
- "\n -B Print NUM lines of leading context" \
- "\n -C Print NUM lines of output context") \
+ "\n -A Print NUM lines of trailing context" \
+ "\n -B Print NUM lines of leading context" \
+ "\n -C Print NUM lines of output context") \
#define grep_example_usage \
"$ grep root /etc/passwd\n" \
@@ -1336,13 +1344,14 @@
"root:x:0:0:root:/root:/bin/bash\n"
#define gunzip_trivial_usage \
- "[OPTION]... FILE"
+ "[OPTION]... [FILE]..."
#define gunzip_full_usage \
- "Uncompress FILE (or standard input if FILE is '-')" \
- "\n\nOptions:\n" \
- " -c Write to standard output\n" \
- " -f Force\n" \
- " -t Test file integrity"
+ "Uncompress FILEs (or standard input)\n" \
+ "\nOptions:" \
+ "\n -c Write to standard output" \
+ "\n -f Force" \
+ "\n -t Test file integrity" \
+
#define gunzip_example_usage \
"$ ls -la /tmp/BusyBox*\n" \
"-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \
@@ -1353,12 +1362,12 @@
#define gzip_trivial_usage \
"[OPTION]... [FILE]..."
#define gzip_full_usage \
- "Compress FILE(s) with maximum compression.\n" \
- "When FILE is '-' or unspecified, reads standard input. Implies -c." \
- "\n\nOptions:\n" \
- " -c Write to standard output\n" \
- " -d Decompress\n" \
- " -f Force"
+ "Compress FILEs (or standard input)\n" \
+ "\nOptions:" \
+ "\n -c Write to standard output" \
+ "\n -d Decompress" \
+ "\n -f Force" \
+
#define gzip_example_usage \
"$ ls -la /tmp/busybox*\n" \
"-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \
@@ -1369,80 +1378,79 @@
#define halt_trivial_usage \
"[-d delay] [-n] [-f]"
#define halt_full_usage \
- "Halt the system" \
- "\n\nOptions:" \
- "\n -d Delay interval for halting" \
- "\n -n No call to sync()" \
- "\n -f Force halt (don't go through init)" \
+ "Halt the system\n" \
+ "\nOptions:" \
+ "\n -d Delay interval for halting" \
+ "\n -n No call to sync()" \
+ "\n -f Force halt (don't go through init)" \
USE_FEATURE_WTMP( \
- "\n -w Only write a wtmp record" \
+ "\n -w Only write a wtmp record" \
)
#define hdparm_trivial_usage \
"[options] [device] .."
#define hdparm_full_usage \
- USE_FEATURE_HDPARM_GET_IDENTITY( \
- "If no device name is specified try to read from stdin.\n\n") \
- "Options:\n" \
- " -a Get/set fs readahead\n" \
- " -A Set drive read-lookahead flag (0/1)\n" \
- " -b Get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \
- " -B Set Advanced Power Management setting (1-255)\n" \
- " -c Get/set IDE 32-bit IO setting\n" \
- " -C Check IDE power mode status\n" \
+ "Options:" \
+ "\n -a Get/set fs readahead" \
+ "\n -A Set drive read-lookahead flag (0/1)" \
+ "\n -b Get/set bus state (0 == off, 1 == on, 2 == tristate)" \
+ "\n -B Set Advanced Power Management setting (1-255)" \
+ "\n -c Get/set IDE 32-bit IO setting" \
+ "\n -C Check IDE power mode status" \
USE_FEATURE_HDPARM_HDIO_GETSET_DMA( \
- " -d Get/set using_dma flag\n") \
- " -D Enable/disable drive defect-mgmt\n" \
- " -f Flush buffer cache for device on exit\n" \
- " -g Display drive geometry\n" \
- " -h Display terse usage information\n" \
+ "\n -d Get/set using_dma flag") \
+ "\n -D Enable/disable drive defect-mgmt" \
+ "\n -f Flush buffer cache for device on exit" \
+ "\n -g Display drive geometry" \
+ "\n -h Display terse usage information" \
USE_FEATURE_HDPARM_GET_IDENTITY( \
- " -i Display drive identification\n") \
+ "\n -i Display drive identification") \
USE_FEATURE_HDPARM_GET_IDENTITY( \
- " -I Detailed/current information directly from drive\n") \
- " -k Get/set keep_settings_over_reset flag (0/1)\n" \
- " -K Set drive keep_features_over_reset flag (0/1)\n" \
- " -L Set drive doorlock (0/1) (removable harddisks only)\n" \
- " -m Get/set multiple sector count\n" \
- " -n Get/set ignore-write-errors flag (0/1)\n" \
- " -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \
- " -P Set drive prefetch count\n" \
- " -q Change next setting quietly\n" \
- " -Q Get/set DMA tagged-queuing depth (if supported)\n" \
- " -r Get/set readonly flag (DANGEROUS to set)\n" \
+ "\n -I Detailed/current information directly from drive") \
+ "\n -k Get/set keep_settings_over_reset flag (0/1)" \
+ "\n -K Set drive keep_features_over_reset flag (0/1)" \
+ "\n -L Set drive doorlock (0/1) (removable harddisks only)" \
+ "\n -m Get/set multiple sector count" \
+ "\n -n Get/set ignore-write-errors flag (0/1)" \
+ "\n -p Set PIO mode on IDE interface chipset (0,1,2,3,4,...)" \
+ "\n -P Set drive prefetch count" \
+ "\n -q Change next setting quietly" \
+ "\n -Q Get/set DMA tagged-queuing depth (if supported)" \
+ "\n -r Get/set readonly flag (DANGEROUS to set)" \
USE_FEATURE_HDPARM_HDIO_SCAN_HWIF( \
- " -R Register an IDE interface (DANGEROUS)\n") \
- " -S Set standby (spindown) timeout\n" \
- " -t Perform device read timings\n" \
- " -T Perform cache read timings\n" \
- " -u Get/set unmaskirq flag (0/1)\n" \
+ "\n -R Register an IDE interface (DANGEROUS)") \
+ "\n -S Set standby (spindown) timeout" \
+ "\n -t Perform device read timings" \
+ "\n -T Perform cache read timings" \
+ "\n -u Get/set unmaskirq flag (0/1)" \
USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF( \
- " -U Un-register an IDE interface (DANGEROUS)\n") \
- " -v Defaults; same as -mcudkrag for IDE drives\n" \
- " -V Display program version and exit immediately\n" \
+ "\n -U Un-register an IDE interface (DANGEROUS)") \
+ "\n -v Defaults; same as -mcudkrag for IDE drives" \
+ "\n -V Display program version and exit immediately" \
USE_FEATURE_HDPARM_HDIO_DRIVE_RESET( \
- " -w Perform device reset (DANGEROUS)\n") \
- " -W Set drive write-caching flag (0/1) (DANGEROUS)\n" \
+ "\n -w Perform device reset (DANGEROUS)") \
+ "\n -W Set drive write-caching flag (0/1) (DANGEROUS)" \
USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF( \
- " -x Tristate device for hotswap (0/1) (DANGEROUS)\n") \
- " -X Set IDE xfer mode (DANGEROUS)\n" \
- " -y Put IDE drive in standby mode\n" \
- " -Y Put IDE drive to sleep\n" \
- " -Z Disable Seagate auto-powersaving mode\n" \
- " -z Re-read partition table"
+ "\n -x Tristate device for hotswap (0/1) (DANGEROUS)") \
+ "\n -X Set IDE xfer mode (DANGEROUS)" \
+ "\n -y Put IDE drive in standby mode" \
+ "\n -Y Put IDE drive to sleep" \
+ "\n -Z Disable Seagate auto-powersaving mode" \
+ "\n -z Re-read partition table" \
#define head_trivial_usage \
"[OPTION]... [FILE]..."
#define head_full_usage \
"Print first 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
- "file name. With no FILE, or when FILE is -, read standard input." \
- "\n\nOptions:" \
- "\n -n NUM Print first NUM lines instead of first 10" \
+ "file name. With no FILE, or when FILE is -, read standard input.\n" \
+ "\nOptions:" \
+ "\n -n NUM Print first NUM lines instead of first 10" \
USE_FEATURE_FANCY_HEAD( \
- "\n -c NUM Output the first NUM bytes" \
- "\n -q Never output headers giving file names" \
- "\n -v Always output headers giving file names")
+ "\n -c NUM Output the first NUM bytes" \
+ "\n -q Never output headers giving file names" \
+ "\n -v Always output headers giving file names") \
+
#define head_example_usage \
"$ head -n 2 /etc/passwd\n" \
"root:x:0:0:root:/root:/bin/bash\n" \
@@ -1451,8 +1459,8 @@
#define hexdump_trivial_usage \
"[-bcCdefnosvx" USE_FEATURE_HEXDUMP_REVERSE("R") "] FILE..."
#define hexdump_full_usage \
- "Display file(s) or standard input in a user specified format" \
- "\n\nOptions:" \
+ "Display file(s) or standard input in a user specified format\n" \
+ "\nOptions:" \
"\n -b One-byte octal display" \
"\n -c One-byte character display" \
"\n -C Canonical hex+ASCII, 16 bytes per line" \
@@ -1478,16 +1486,16 @@
"Print out a unique 32-bit identifier for the machine"
#define hostname_trivial_usage \
- "[OPTION] {hostname | -F FILE}"
+ "[OPTION] [hostname | -F FILE]"
#define hostname_full_usage \
- "Get or set the hostname or DNS domain name. If a hostname is given\n" \
- "(or FILE with the -F parameter), the host name will be set." \
- "\n\nOptions:\n" \
- " -s Short\n" \
- " -i Addresses for the hostname\n" \
- " -d DNS domain name\n" \
- " -f Fully qualified domain name\n" \
- " -F FILE Use the contents of FILE to specify the hostname"
+ "Get or set hostname or DNS domain name\n" \
+ "\nOptions:" \
+ "\n -s Short" \
+ "\n -i Addresses for the hostname" \
+ "\n -d DNS domain name" \
+ "\n -f Fully qualified domain name" \
+ "\n -F FILE Use the contents of FILE to specify the hostname" \
+
#define hostname_example_usage \
"$ hostname\n" \
"sage\n"
@@ -1502,22 +1510,22 @@
" [-h home]" \
" [-d/-e string]"
#define httpd_full_usage \
- "Listen for incoming HTTP requests" \
- "\n\nOptions:" \
- "\n -c FILE Configuration file (default httpd.conf)" \
- "\n -p [IP:]PORT Bind to ip:port (default *:80)" \
- "\n -i Inetd mode" \
- "\n -f Do not daemonize" \
- "\n -v[v] Verbose" \
+ "Listen for incoming HTTP requests\n" \
+ "\nOptions:" \
+ "\n -c FILE Configuration file (default httpd.conf)" \
+ "\n -p [IP:]PORT Bind to ip:port (default *:80)" \
+ "\n -i Inetd mode" \
+ "\n -f Do not daemonize" \
+ "\n -v[v] Verbose" \
USE_FEATURE_HTTPD_SETUID( \
- "\n -u USER[:GRP] Set uid/gid after binding to port") \
+ "\n -u USER[:GRP] Set uid/gid after binding to port") \
USE_FEATURE_HTTPD_BASIC_AUTH( \
- "\n -r REALM Authentication Realm for Basic Authentication") \
+ "\n -r REALM Authentication Realm for Basic Authentication") \
USE_FEATURE_HTTPD_AUTH_MD5( \
- "\n -m PASS Crypt PASS with md5 algorithm") \
- "\n -h HOME Home directory (default .)" \
- "\n -e STRING HTML encode STRING" \
- "\n -d STRING URL decode STRING" \
+ "\n -m PASS Crypt PASS with md5 algorithm") \
+ "\n -h HOME Home directory (default .)" \
+ "\n -e STRING HTML encode STRING" \
+ "\n -d STRING URL decode STRING" \
#define hwclock_trivial_usage \
USE_GETOPT_LONG( \
@@ -1529,27 +1537,28 @@
"[-r] [-s] [-w] [-l] [-u] [-f FILE]" \
)
#define hwclock_full_usage \
- "Query and set a hardware clock (RTC)" \
- "\n\nOptions:\n" \
- " -r Show time from hardware clock\n" \
- " -s Set system time from hardware clock\n" \
- " -w Set hardware clock to system time\n" \
- " -u Hardware clock is in UTC\n" \
- " -l Hardware clock is in local time\n" \
- " -f FILE Use specified device (e.g. /dev/rtc2)"
+ "Query and set hardware clock (RTC)\n" \
+ "\nOptions:" \
+ "\n -r Show time from hardware clock" \
+ "\n -s Set system time from hardware clock" \
+ "\n -w Set hardware clock to system time" \
+ "\n -u Hardware clock is in UTC" \
+ "\n -l Hardware clock is in local time" \
+ "\n -f FILE Use specified device (e.g. /dev/rtc2)" \
#define id_trivial_usage \
- "[OPTIONS]... [USERNAME]"
+ "[OPTIONS]... [USER]"
#define id_full_usage \
- "Print information for USERNAME or the current user" \
- "\n\nOptions:\n" \
+ "Print information about USER or the current user\n" \
+ "\nOptions:" \
USE_SELINUX( \
- " -Z Prints only the security context\n" \
+ "\n -Z Print the security context" \
) \
- " -g Prints only the group ID\n" \
- " -u Prints only the user ID\n" \
- " -n Print a name instead of a number\n" \
- " -r Prints the real user ID instead of the effective ID"
+ "\n -g Print group ID" \
+ "\n -u Print user ID" \
+ "\n -n Print name instead of a number" \
+ "\n -r Print real user ID instead of effective ID" \
+
#define id_example_usage \
"$ id\n" \
"uid=1000(andersen) gid=1000(andersen)\n"
@@ -1557,8 +1566,9 @@
#define ifconfig_trivial_usage \
USE_FEATURE_IFCONFIG_STATUS("[-a]") " interface [address]"
#define ifconfig_full_usage \
- "Configure a network interface" \
- "\n\nOptions:\n" \
+ "Configure a network interface\n" \
+ "\nOptions:" \
+ "\n" \
USE_FEATURE_IPV6( \
" [add ADDRESS[/PREFIXLEN]]\n") \
USE_FEATURE_IPV6( \
@@ -1577,12 +1587,13 @@
#define ifenslave_trivial_usage \
"[-cdf] master-iface <slave-iface...>"
#define ifenslave_full_usage \
- "Configure network interfaces for parallel routing\n\n" \
- "Options:" \
+ "Configure network interfaces for parallel routing\n" \
+ "\nOptions:" \
"\n -c, --change-active Change active slave" \
"\n -d, --detach Remove slave interface from bonding device" \
"\n -f, --force Force, even if interface is not Ethernet" \
/* "\n -r, --receive-slave Create a receive-only slave" */
+
#define ifenslave_example_usage \
"To create a bond device, simply follow these three steps :\n" \
"- ensure that the required drivers are properly loaded :\n" \
@@ -1598,31 +1609,31 @@
" To set the bond device down and automatically release all the slaves :\n" \
" # ifconfig bond0 down\n\n" \
" To change active slave :\n" \
- " # ifenslave -c bond0 eth0\n"
+ " # ifenslave -c bond0 eth0\n" \
#define ifup_trivial_usage \
"[-ahinv] ifaces..."
#define ifup_full_usage \
- "Options:\n" \
- " -a De/configure all interfaces automatically\n" \
- " -i FILE Use FILE for interface definitions\n" \
- " -n Print out what would happen, but don't do it\n" \
- " (note: doesn't disable mappings)\n" \
- " -v Print out what would happen before doing it\n" \
- " -m Don't run any mappings\n" \
- " -f Force de/configuration"
+ "Options:" \
+ "\n -a De/configure all interfaces automatically" \
+ "\n -i FILE Use FILE for interface definitions" \
+ "\n -n Print out what would happen, but don't do it" \
+ "\n (note: doesn't disable mappings)" \
+ "\n -v Print out what would happen before doing it" \
+ "\n -m Don't run any mappings" \
+ "\n -f Force de/configuration" \
#define ifdown_trivial_usage \
"[-ahinv] ifaces..."
#define ifdown_full_usage \
- "Options:\n" \
- " -a De/configure all interfaces automatically\n" \
- " -i FILE Use FILE for interface definitions\n" \
- " -n Print out what would happen, but don't do it\n" \
- " (note: doesn't disable mappings)\n" \
- " -v Print out what would happen before doing it\n" \
- " -m Don't run any mappings\n" \
- " -f Force de/configuration"
+ "Options:" \
+ "\n -a De/configure all interfaces automatically" \
+ "\n -i FILE Use FILE for interface definitions" \
+ "\n -n Print out what would happen, but don't do it" \
+ "\n (note: doesn't disable mappings)" \
+ "\n -v Print out what would happen before doing it" \
+ "\n -m Don't run any mappings" \
+ "\n -f Force de/configuration" \
#define inetd_trivial_usage \
"[-fe] [-q N] [-R N] [CONFFILE]"
@@ -1633,12 +1644,13 @@
"\n -e Log to stderr" \
"\n -q N Socket listen queue (default: 128)" \
"\n -R N Pause services after N connects/min" \
- "\n (default: 0 - disabled)"
+ "\n (default: 0 - disabled)" \
#define init_trivial_usage \
""
#define init_full_usage \
"Init is the parent of all processes"
+
#define init_notes_usage \
"This version of init is designed to be run only by the kernel.\n" \
"\n" \
@@ -1770,36 +1782,37 @@
USE_FEATURE_2_4_MODULES("[OPTION]... ") "MODULE [symbol=value]..."
#define insmod_full_usage \
"Load the specified kernel modules into the kernel" \
- USE_FEATURE_2_4_MODULES( \
- "\n\nOptions:\n" \
- " -f Force module to load into the wrong kernel version\n" \
- " -k Make module autoclean-able\n" \
- " -v Verbose\n" \
- " -q Quiet\n" \
- " -L Lock to prevent simultaneous loads of a module\n" \
+ USE_FEATURE_2_4_MODULES( "\n" \
+ "\nOptions:" \
+ "\n -f Force module to load into the wrong kernel version" \
+ "\n -k Make module autoclean-able" \
+ "\n -v Verbose" \
+ "\n -q Quiet" \
+ "\n -L Lock to prevent simultaneous loads of a module" \
USE_FEATURE_INSMOD_LOAD_MAP( \
- " -m Output load map to stdout\n" \
+ "\n -m Output load map to stdout" \
) \
- " -o NAME Set internal module name to NAME\n" \
- " -x Do not export externs" \
+ "\n -o NAME Set internal module name to NAME" \
+ "\n -x Do not export externs" \
)
#define install_trivial_usage \
"[-cgmops] [sources] dest|directory"
#define install_full_usage \
- "Copy files and set attributes" \
- "\n\nOptions:\n" \
- " -c Copy the file, default\n" \
- " -d Create directories\n" \
- " -g Set group ownership\n" \
- " -m Set permissions\n" \
- " -o Set ownership\n" \
- " -p Preserve date\n" \
- " -s Strip symbol tables" \
+ "Copy files and set attributes\n" \
+ "\nOptions:" \
+ "\n -c Copy the file, default" \
+ "\n -d Create directories" \
+ "\n -g Set group ownership" \
+ "\n -m Set permissions" \
+ "\n -o Set ownership" \
+ "\n -p Preserve date" \
+ "\n -s Strip symbol tables" \
USE_SELINUX( \
- "\n -Z Set security context of copy" \
+ "\n -Z Set security context of copy" \
)
-/* would need to make the " | " optional depending on more than one selected */
+
+/* would need to make the " | " optional depending on more than one selected: */
#define ip_trivial_usage \
"[OPTIONS] {" \
USE_FEATURE_IP_ADDRESS("address | ") \
@@ -1817,7 +1830,7 @@
USE_FEATURE_IP_TUNNEL("tunnel | ") \
USE_FEATURE_IP_RULE("rule") \
"}\n" \
- "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }"
+ "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" \
#define ipaddr_trivial_usage \
"{ {add|del} IFADDR dev STRING | {show|flush}\n" \
@@ -1829,60 +1842,59 @@
" IFADDR := PREFIX | ADDR peer PREFIX\n" \
" [broadcast ADDR] [anycast ADDR]\n" \
" [label STRING] [scope SCOPE-ID]\n" \
- " SCOPE-ID := [host | link | global | NUMBER]"
+ " SCOPE-ID := [host | link | global | NUMBER]" \
#define ipcalc_trivial_usage \
"[OPTION]... ADDRESS[[/]NETMASK] [NETMASK]"
#define ipcalc_full_usage \
- "Calculate IP network settings from a IP address" \
- "\n\nOptions:" \
+ "Calculate IP network settings from a IP address\n" \
+ "\nOptions:" \
USE_FEATURE_IPCALC_LONG_OPTIONS( \
- "\n -b,--broadcast Display calculated broadcast address" \
- "\n -n,--network Display calculated network address" \
- "\n -m,--netmask Display default netmask for IP" \
+ "\n -b,--broadcast Display calculated broadcast address" \
+ "\n -n,--network Display calculated network address" \
+ "\n -m,--netmask Display default netmask for IP" \
USE_FEATURE_IPCALC_FANCY( \
- "\n -p,--prefix Display the prefix for IP/NETMASK" \
- "\n -h,--hostname Display first resolved host name" \
- "\n -s,--silent Don't ever display error messages" \
+ "\n -p,--prefix Display the prefix for IP/NETMASK" \
+ "\n -h,--hostname Display first resolved host name" \
+ "\n -s,--silent Don't ever display error messages" \
) \
) \
SKIP_FEATURE_IPCALC_LONG_OPTIONS( \
- "\n -b Display calculated broadcast address" \
- "\n -n Display calculated network address" \
- "\n -m Display default netmask for IP" \
+ "\n -b Display calculated broadcast address" \
+ "\n -n Display calculated network address" \
+ "\n -m Display default netmask for IP" \
USE_FEATURE_IPCALC_FANCY( \
- "\n -p Display the prefix for IP/NETMASK" \
- "\n -h Display first resolved host name" \
- "\n -s Don't ever display error messages" \
+ "\n -p Display the prefix for IP/NETMASK" \
+ "\n -h Display first resolved host name" \
+ "\n -s Don't ever display error messages" \
) \
)
#define ipcrm_trivial_usage \
- "[-[MQS] key] [-[mqs] id]"
+ "[-MQS key] [-mqs id]"
#define ipcrm_full_usage \
- "The upper-case options MQS are used to remove a shared memory segment by a\n" \
- "segment by a shmkey value. The lower-case options mqs are used\n" \
- "to remove a segment by shmid value.\n" \
- "\n\nOptions:\n" \
- " -[mM] Remove the memory segment after the last detach\n" \
- " -[qQ] Remove the message queue\n" \
- " -[sS] Remove the semaphore"
+ "Upper-case options MQS remove an object by shmkey value.\n" \
+ "Lower-case options remove an object by shmid value.\n" \
+ "\nOptions:" \
+ "\n -mM Remove memory segment after last detach" \
+ "\n -qQ Remove message queue" \
+ "\n -sS Remove semaphore" \
#define ipcs_trivial_usage \
"[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
#define ipcs_full_usage \
- " -i Show a specific resource\n" \
- "Resource specification:\n" \
- " -m Shared memory segments\n" \
- " -q Message queues\n" \
- " -s Semaphore arrays\n" \
- " -a All (default)\n" \
- "Output format:\n" \
- " -t Time\n" \
- " -c Creator\n" \
- " -p Pid\n" \
- " -l Limits\n" \
- " -u Summary"
+ " -i Show specific resource" \
+ "\nResource specification:" \
+ "\n -m Shared memory segments" \
+ "\n -q Message queues" \
+ "\n -s Semaphore arrays" \
+ "\n -a All (default)" \
+ "\nOutput format:" \
+ "\n -t Time" \
+ "\n -c Creator" \
+ "\n -p Pid" \
+ "\n -l Limits" \
+ "\n -u Summary" \
#define iplink_trivial_usage \
"{ set DEVICE { up | down | arp { on | off } | show [DEVICE] }"
@@ -1890,7 +1902,7 @@
"iplink set DEVICE { up | down | arp | multicast { on | off } |\n" \
" dynamic { on | off } |\n" \
" mtu MTU }\n" \
- "iplink show [DEVICE]"
+ "iplink show [DEVICE]" \
#define iproute_trivial_usage \
"{ list | flush | { add | del | change | append |\n" \
@@ -1901,7 +1913,7 @@
" [oif STRING] [tos TOS]\n" \
"iproute { add | del | change | append | replace | monitor } ROUTE\n" \
" SELECTOR := [root PREFIX] [match PREFIX] [proto RTPROTO]\n" \
- " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]"
+ " ROUTE := [TYPE] PREFIX [tos TOS] [proto RTPROTO]" \
#define iprule_trivial_usage \
"{[list | add | del] RULE}"
@@ -1912,7 +1924,7 @@
" ACTION := [table TABLE_ID] [nat ADDRESS]\n" \
" [prohibit | reject | unreachable]\n" \
" [realms [SRCREALM/]DSTREALM]\n" \
- " TABLE_ID := [local | main | default | NUMBER]"
+ " TABLE_ID := [local | main | default | NUMBER]" \
#define iptunnel_trivial_usage \
"{ add | change | del | show } [NAME]\n" \
@@ -1922,24 +1934,25 @@
"iptunnel { add | change | del | show } [NAME]\n" \
" [mode { ipip | gre | sit }] [remote ADDR] [local ADDR]\n" \
" [[i|o]seq] [[i|o]key KEY] [[i|o]csum]\n" \
- " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]"
+ " [ttl TTL] [tos TOS] [[no]pmtudisc] [dev PHYS_DEV]" \
#define kbd_mode_trivial_usage \
"[-a|k|s|u]"
#define kbd_mode_full_usage \
- "Report or set the keyboard mode" \
- "\n\nOptions set mode:\n" \
- " -a Default (ASCII)\n" \
- " -k Medium-raw (keyboard)\n" \
- " -s Raw (scancode)\n" \
- " -u Unicode (utf-8)"
+ "Report or set the keyboard mode\n" \
+ "\nOptions set mode:" \
+ "\n -a Default (ASCII)" \
+ "\n -k Medium-raw (keyboard)" \
+ "\n -s Raw (scancode)" \
+ "\n -u Unicode (utf-8)" \
#define kill_trivial_usage \
- "[-l] [-signal] process-id [process-id...]"
+ "[-l] [-signal] process-id..."
#define kill_full_usage \
- "Send a signal (default is TERM) to the specified process(es)" \
- "\n\nOptions:\n" \
- " -l List all signal names and numbers"
+ "Send a signal (default is TERM) to the specified process(es)\n" \
+ "\nOptions:" \
+ "\n -l List all signal names and numbers" \
+
#define kill_example_usage \
"$ ps | grep apache\n" \
"252 root root S [apache]\n" \
@@ -1951,34 +1964,36 @@
"$ kill 252\n"
#define killall_trivial_usage \
- "[-l] [-q] [-signal] process-name [process-name...]"
+ "[-l] [-q] [-signal] process-name..."
#define killall_full_usage \
- "Send a signal (default is TERM) to the specified process(es)" \
- "\n\nOptions:\n" \
- " -l List all signal names and numbers\n" \
- " -q Do not complain if no processes were killed"
+ "Send a signal (default is TERM) to the specified process(es)\n" \
+ "\nOptions:" \
+ "\n -l List all signal names and numbers" \
+ "\n -q Do not complain if no processes were killed" \
+
#define killall_example_usage \
"$ killall apache\n"
#define killall5_trivial_usage \
"[-l] [-signal]"
#define killall5_full_usage \
- "Send a signal (default is TERM) to all processes outside current session" \
- "\n\nOptions:\n" \
- " -l List all signal names and numbers\n" \
+ "Send a signal (default is TERM) to all processes outside current session\n" \
+ "\nOptions:" \
+ "\n -l List all signal names and numbers" \
#define klogd_trivial_usage \
"[-c n] [-n]"
#define klogd_full_usage \
- "Kernel logger" \
- "\n\nOptions:\n" \
- " -c n Sets the default log level of console messages to n\n" \
- " -n Run in foreground"
+ "Kernel logger\n" \
+ "\nOptions:" \
+ "\n -c n Set the default log level of console messages to n" \
+ "\n -n Run in foreground" \
#define length_trivial_usage \
"STRING"
#define length_full_usage \
- "Print out the length of the specified STRING"
+ "Print STRING's length"
+
#define length_example_usage \
"$ length Hello\n" \
"5\n"
@@ -1987,32 +2002,33 @@
"[-EMNmh~?] [FILE...]"
#define less_full_usage \
"View a file or list of files. The position within files can be\n" \
- "changed, and files can be manipulated in various ways." \
- "\n\nOptions:\n" \
- " -E Quit once the end of a file is reached\n" \
- " -M,-m Display a status line containing the line numbers\n" \
- " and percentage through the file\n" \
- " -N Prefix line numbers to each line\n" \
- " -~ Suppress ~s displayed past the end of the file" \
+ "changed, and files can be manipulated in various ways.\n" \
+ "\nOptions:" \
+ "\n -E Quit once the end of a file is reached" \
+ "\n -M,-m Display a status line containing the line numbers" \
+ "\n and percentage through the file" \
+ "\n -N Prefix line numbers to each line" \
+ "\n -~ Suppress ~s displayed past the end of the file" \
#define setarch_trivial_usage \
"personality program [args...]"
#define setarch_full_usage \
"Personality may be:\n" \
" linux32 Set 32bit uname emulation\n" \
- " linux64 Set 64bit uname emulation"
+ " linux64 Set 64bit uname emulation" \
#define ln_trivial_usage \
"[OPTION] TARGET... LINK_NAME|DIRECTORY"
#define ln_full_usage \
"Create a link named LINK_NAME or DIRECTORY to the specified TARGET.\n" \
- "You may use '--' to indicate that all following arguments are non-options." \
- "\n\nOptions:\n" \
- " -s Make symlinks instead of hardlinks\n" \
- " -f Remove existing destination files\n" \
- " -n Don't dereference symlinks - treat like normal file\n" \
- " -b Make a backup of the target (if exists) before link operation\n" \
- " -S suf Use suffix instead of ~ when making backup files"
+ "Use '--' to indicate that all following arguments are non-options.\n" \
+ "\nOptions:" \
+ "\n -s Make symlinks instead of hardlinks" \
+ "\n -f Remove existing destination files" \
+ "\n -n Don't dereference symlinks - treat like normal file" \
+ "\n -b Make a backup of the target (if exists) before link operation" \
+ "\n -S suf Use suffix instead of ~ when making backup files" \
+
#define ln_example_usage \
"$ ln -s BusyBox /tmp/ls\n" \
"$ ls -l /tmp/ls\n" \
@@ -2039,11 +2055,11 @@
#define logger_trivial_usage \
"[OPTION]... [MESSAGE]"
#define logger_full_usage \
- "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin." \
- "\n\nOptions:\n" \
- " -s Log to stderr as well as the system log\n" \
- " -t TAG Log using the specified tag (defaults to user name)\n" \
- " -p PRIO Priority (numeric or facility.level pair)"
+ "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n" \
+ "\nOptions:" \
+ "\n -s Log to stderr as well as the system log" \
+ "\n -t TAG Log using the specified tag (defaults to user name)" \
+ "\n -p PRIO Priority (numeric or facility.level pair)" \
#define logger_example_usage \
"$ logger \"hello\"\n"
@@ -2051,11 +2067,11 @@
#define login_trivial_usage \
"[-p] [-h HOST] [[-f] USER]"
#define login_full_usage \
- "Begin a new session on the system" \
- "\n\nOptions:\n" \
- " -f Do not authenticate (user already authenticated)\n" \
- " -h Name of the remote host\n" \
- " -p Preserve environment"
+ "Begin a new session on the system\n" \
+ "\nOptions:" \
+ "\n -f Do not authenticate (user already authenticated)" \
+ "\n -h Name of the remote host" \
+ "\n -p Preserve environment" \
#define logname_trivial_usage \
""
@@ -2068,18 +2084,19 @@
#define logread_trivial_usage \
"[OPTION]..."
#define logread_full_usage \
- "Show messages in syslogd's circular buffer" \
- "\n\nOptions:\n" \
- " -f Output data as log grows"
+ "Show messages in syslogd's circular buffer\n" \
+ "\nOptions:" \
+ "\n -f Output data as log grows" \
#define losetup_trivial_usage \
"[-o OFS] LOOPDEV FILE - associate loop devices\n" \
" losetup -d LOOPDEV - disassociate\n" \
" losetup [-f] - show"
#define losetup_full_usage \
- "Options:\n" \
- " -o OFS Start OFS bytes into FILE\n" \
- " -f Show first free loop device"
+ "Options:" \
+ "\n -o OFS Start OFS bytes into FILE" \
+ "\n -f Show first free loop device" \
+
#define losetup_notes_usage \
"No arguments will display all current associations.\n" \
"One argument (losetup /dev/loop1) will display the current association\n" \
@@ -2093,12 +2110,12 @@
"SPOOLDIR"
#define lpd_full_usage \
"Example:" \
- "\n tcpsvd -E 0 515 softlimit -m 99999 lpd /var/spool"
+ "\n tcpsvd -E 0 515 softlimit -m 99999 lpd /var/spool"
#define lpq_trivial_usage \
"[-P queue[@host[:port]]] [-U USERNAME] [-d JOBID...] [-fs]"
#define lpq_full_usage \
- "Options:" \
+ "Options:" \
"\n -P lp service to connect to (else uses $PRINTER)" \
"\n -d Delete jobs" \
"\n -f Force any waiting job to be printed" \
@@ -2109,7 +2126,7 @@
/* -C CLASS exists too, not shown.
* CLASS is supposed to be printed on banner page, if one is requested */
#define lpr_full_usage \
- "Options:" \
+ "Options:" \
"\n -P lp service to connect to (else uses $PRINTER)"\
"\n -m Send mail on completion" \
"\n -h Print banner page too" \
@@ -2125,67 +2142,67 @@
USE_FEATURE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" \
USE_SELINUX("K") "] [filenames...]"
#define ls_full_usage \
- "List directory contents" \
- "\n\nOptions:" \
- "\n -1 List files in a single column" \
- "\n -A Do not list implied . and .." \
- "\n -a Do not hide entries starting with ." \
- "\n -C List entries by columns" \
+ "List directory contents\n" \
+ "\nOptions:" \
+ "\n -1 List files in a single column" \
+ "\n -A Do not list implied . and .." \
+ "\n -a Do not hide entries starting with ." \
+ "\n -C List entries by columns" \
USE_FEATURE_LS_TIMESTAMPS( \
- "\n -c With -l: show ctime") \
+ "\n -c With -l: show ctime") \
USE_FEATURE_LS_COLOR( \
- "\n --color[={always,never,auto}] Control coloring") \
- "\n -d List directory entries instead of contents" \
+ "\n --color[={always,never,auto}] Control coloring") \
+ "\n -d List directory entries instead of contents" \
USE_FEATURE_LS_TIMESTAMPS( \
- "\n -e List both full date and full time") \
+ "\n -e List both full date and full time") \
USE_FEATURE_LS_FILETYPES( \
- "\n -F Append indicator (one of */=@|) to entries") \
- "\n -i List the i-node for each file" \
- "\n -l Use a long listing format" \
- "\n -n List numeric UIDs and GIDs instead of names" \
+ "\n -F Append indicator (one of */=@|) to entries") \
+ "\n -i List the i-node for each file" \
+ "\n -l Use a long listing format" \
+ "\n -n List numeric UIDs and GIDs instead of names" \
USE_FEATURE_LS_FILETYPES( \
- "\n -p Append indicator (one of /=@|) to entries") \
+ "\n -p Append indicator (one of /=@|) to entries") \
USE_FEATURE_LS_FOLLOWLINKS( \
- "\n -L List entries pointed to by symlinks") \
+ "\n -L List entries pointed to by symlinks") \
USE_FEATURE_LS_RECURSIVE( \
- "\n -R List subdirectories recursively") \
+ "\n -R List subdirectories recursively") \
USE_FEATURE_LS_SORTFILES( \
- "\n -r Sort the listing in reverse order") \
+ "\n -r Sort the listing in reverse order") \
USE_FEATURE_LS_SORTFILES( \
- "\n -S Sort the listing by file size") \
- "\n -s List the size of each file, in blocks" \
+ "\n -S Sort the listing by file size") \
+ "\n -s List the size of each file, in blocks" \
USE_FEATURE_AUTOWIDTH( \
- "\n -T NUM Assume Tabstop every NUM columns") \
+ "\n -T NUM Assume Tabstop every NUM columns") \
USE_FEATURE_LS_TIMESTAMPS( \
- "\n -t With -l: show modification time") \
+ "\n -t With -l: show modification time") \
USE_FEATURE_LS_TIMESTAMPS( \
- "\n -u With -l: show access time") \
+ "\n -u With -l: show access time") \
USE_FEATURE_LS_SORTFILES( \
- "\n -v Sort the listing by version") \
+ "\n -v Sort the listing by version") \
USE_FEATURE_AUTOWIDTH( \
- "\n -w NUM Assume the terminal is NUM columns wide") \
- "\n -x List entries by lines instead of by columns" \
+ "\n -w NUM Assume the terminal is NUM columns wide") \
+ "\n -x List entries by lines instead of by columns" \
USE_FEATURE_LS_SORTFILES( \
- "\n -X Sort the listing by extension") \
+ "\n -X Sort the listing by extension") \
USE_FEATURE_HUMAN_READABLE( \
- "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \
+ "\n -h Print sizes in human readable format (e.g., 1K 243M 2G)") \
USE_SELINUX( \
- "\n -k Print security context") \
+ "\n -k Print security context") \
USE_SELINUX( \
- "\n -K Print security context in long format") \
+ "\n -K Print security context in long format") \
USE_SELINUX( \
- "\n -Z Print security context and permission")
+ "\n -Z Print security context and permission") \
#define lsattr_trivial_usage \
"[-Radlv] [files...]"
#define lsattr_full_usage \
- "List file attributes on an ext2 fs" \
- "\n\nOptions:\n" \
- " -R Recursively list subdirectories\n" \
- " -a Do not hide entries starting with .\n" \
- " -d List directory entries instead of contents\n" \
- " -l Print long flag names\n" \
- " -v List the file's version/generation number"
+ "List file attributes on an ext2 fs\n" \
+ "\nOptions:" \
+ "\n -R Recursively list subdirectories" \
+ "\n -a Do not hide entries starting with ." \
+ "\n -d List directory entries instead of contents" \
+ "\n -l Print long flag names" \
+ "\n -v List the file's version/generation number" \
#define lsmod_trivial_usage \
""
@@ -2253,23 +2270,22 @@
"[-n] [-N] [-f file_contexts_file] [-p prefix] [-V]"
#define matchpathcon_full_usage \
" -n Do not display path" \
- "\n -N Do not use translations" \
- "\n -f Use alternate file_context file" \
- "\n -p Use prefix to speed translations" \
- "\n -V Verify file context on disk matches defaults"
+ "\n -N Do not use translations" \
+ "\n -f Use alternate file_context file" \
+ "\n -p Use prefix to speed translations" \
+ "\n -V Verify file context on disk matches defaults" \
#define md5sum_trivial_usage \
"[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]")
#define md5sum_full_usage \
"Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums" \
- "\n\nOptions:\n" \
- "With no FILE, or when FILE is -, read standard input." \
- USE_FEATURE_MD5_SHA1_SUM_CHECK("\n\n" \
- " -c Check MD5 sums against given list\n" \
- "\nThe following two options are useful only when verifying checksums:\n" \
- " -s Don't output anything, status code shows success\n" \
- " -w Warn about improperly formatted MD5 checksum lines")
+ USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+ "\nOptions:" \
+ "\n -c Check MD5 sums against given list" \
+ "\n -s Don't output anything, status code shows success" \
+ "\n -w Warn about improperly formatted MD5 checksum lines") \
+
#define md5sum_example_usage \
"$ md5sum < busybox\n" \
"6fd11e98b98a58f64ff3398d7b324003\n" \
@@ -2283,9 +2299,11 @@
#define mdev_trivial_usage \
"[-s]"
#define mdev_full_usage \
- " -s Scan /sys and populate /dev during system boot\n\n" \
+ " -s Scan /sys and populate /dev during system boot\n" \
+ "\n" \
"Called with no options (via hotplug) it uses environment variables\n" \
"to determine which device to add/remove."
+
#define mdev_notes_usage "" \
USE_FEATURE_MDEV_CONFIG( \
"The mdev config file contains lines that look like:\n" \
@@ -2316,23 +2334,23 @@
#define microcom_trivial_usage \
"[-d DELAY] [-t TIMEOUT] [-s SPEED] [-X] TTY"
#define microcom_full_usage \
- "Copy bytes for stdin to TTY and from TTY to stdout" \
- "\n\nOptions:" \
- "\n -d Wait up to DELAY ms for TTY output before sending every" \
- "\n next byte to it" \
- "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
- "\n -s Set serial line to SPEED" \
- "\n -X Disable special meaning of NUL and Ctrl-X from stdin"
+ "Copy bytes for stdin to TTY and from TTY to stdout\n" \
+ "\nOptions:" \
+ "\n -d Wait up to DELAY ms for TTY output before sending every" \
+ "\n next byte to it" \
+ "\n -t Exit if both stdin and TTY are silent for TIMEOUT ms" \
+ "\n -s Set serial line to SPEED" \
+ "\n -X Disable special meaning of NUL and Ctrl-X from stdin" \
#define mkdir_trivial_usage \
"[OPTION] DIRECTORY..."
#define mkdir_full_usage \
- "Create the DIRECTORY(ies) if they do not already exist" \
- "\n\nOptions:\n" \
- " -m Set permission mode (as in chmod), not rwxrwxrwx - umask\n" \
- " -p No error if existing, make parent directories as needed" \
+ "Create DIRECTORY\n" \
+ "\nOptions:" \
+ "\n -m Set permission mode (as in chmod), not rwxrwxrwx - umask" \
+ "\n -p No error if existing, make parent directories as needed" \
USE_SELINUX( \
- "\n -Z Set security context" \
+ "\n -Z Set security context" \
)
#define mkdir_example_usage \
@@ -2351,62 +2369,62 @@
"[-M last-mounted-directory] [-S] [-T filesystem-type] " \
"device [blocks-count]"
#define mke2fs_full_usage \
- " -b size Block size in bytes\n" \
- " -c Check for bad blocks before creating\n" \
- " -E opts Set extended options\n" \
- " -f size Fragment size in bytes\n" \
- " -F Force (ignore sanity checks)\n" \
- " -g num Number of blocks in a block group\n" \
- " -i ratio The bytes/inode ratio\n" \
- " -j Create a journal (ext3)\n" \
- " -J opts Set journal options (size/device)\n" \
- " -l file Read bad blocks list from file\n" \
- " -L lbl Set the volume label\n" \
- " -m percent Percent of fs blocks to reserve for admin\n" \
- " -M dir Set last mounted directory\n" \
- " -n Do not actually create anything\n" \
- " -N num Number of inodes to create\n" \
- " -o os Set the 'creator os' field\n" \
- " -O features Dir_index/filetype/has_journal/journal_dev/sparse_super\n" \
- " -q Quiet\n" \
- " -r rev Set filesystem revision\n" \
- " -S Write superblock and group descriptors only\n" \
- " -T fs-type Set usage type (news/largefile/largefile4)\n" \
- " -v Verbose"
+ " -b size Block size in bytes" \
+ "\n -c Check for bad blocks before creating" \
+ "\n -E opts Set extended options" \
+ "\n -f size Fragment size in bytes" \
+ "\n -F Force (ignore sanity checks)" \
+ "\n -g num Number of blocks in a block group" \
+ "\n -i ratio The bytes/inode ratio" \
+ "\n -j Create a journal (ext3)" \
+ "\n -J opts Set journal options (size/device)" \
+ "\n -l file Read bad blocks list from file" \
+ "\n -L lbl Set the volume label" \
+ "\n -m percent Percent of fs blocks to reserve for admin" \
+ "\n -M dir Set last mounted directory" \
+ "\n -n Do not actually create anything" \
+ "\n -N num Number of inodes to create" \
+ "\n -o os Set the 'creator os' field" \
+ "\n -O features Dir_index/filetype/has_journal/journal_dev/sparse_super" \
+ "\n -q Quiet" \
+ "\n -r rev Set filesystem revision" \
+ "\n -S Write superblock and group descriptors only" \
+ "\n -T fs-type Set usage type (news/largefile/largefile4)" \
+ "\n -v Verbose" \
#define mkfifo_trivial_usage \
"[OPTIONS] name"
#define mkfifo_full_usage \
- "Create a named pipe (identical to 'mknod name p')" \
- "\n\nOptions:\n" \
- " -m Create the pipe using the specified mode (default a=rw)" \
+ "Create named pipe (identical to 'mknod name p')\n" \
+ "\nOptions:" \
+ "\n -m MODE Mode (default a=rw)" \
USE_SELINUX( \
- "\n -Z Set security context" \
+ "\n -Z Set security context" \
)
#define mkfs_minix_trivial_usage \
"[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]"
#define mkfs_minix_full_usage \
- "Make a MINIX filesystem" \
- "\n\nOptions:\n" \
- " -c Check device for bad blocks\n" \
- " -n [14|30] Maximum length of filenames\n" \
- " -i INODES Number of inodes for the filesystem\n" \
- " -l FILENAME Read bad blocks list from FILENAME\n" \
- " -v Make version 2 filesystem"
+ "Make a MINIX filesystem\n" \
+ "\nOptions:" \
+ "\n -c Check device for bad blocks" \
+ "\n -n [14|30] Maximum length of filenames" \
+ "\n -i INODES Number of inodes for the filesystem" \
+ "\n -l FILENAME Read bad blocks list from FILENAME" \
+ "\n -v Make version 2 filesystem" \
#define mknod_trivial_usage \
"[OPTIONS] NAME TYPE MAJOR MINOR"
#define mknod_full_usage \
- "Create a special file (block, character, or pipe)" \
- "\n\nOptions:\n" \
- " -m Create the special file using the specified mode (default a=rw)" \
- "\n\nTYPEs include:\n" \
- " b: Make a block (buffered) device\n" \
- " c or u: Make a character (un-buffered) device\n" \
- " p: Make a named pipe. MAJOR and MINOR are ignored for named pipes" \
+ "Create a special file (block, character, or pipe)\n" \
+ "\nOptions:" \
+ "\n -m Create the special file using the specified mode (default a=rw)" \
+ "\nTYPEs include:" \
+ "\n b: Make a block device" \
+ "\n c or u: Make a character device" \
+ "\n p: Make a named pipe (MAJOR and MINOR are ignored)" \
USE_SELINUX( \
- "\n -Z Set security context" \
+ "\n -Z Set security context" \
)
#define mknod_example_usage \
@@ -2419,7 +2437,7 @@
"Prepare block device to be used as swap partition"
#if 0
"[-c] [-v0|-v1] DEVICE [BLOCKS]"
- "\n\nOptions:"
+ "\nOptions:"
"\n -c Check for readability"
"\n -v0 Make swap version 0 (max 128M)"
"\n -v1 Make swap version 1 (default for kernels > 2.1.117)"
@@ -2430,15 +2448,16 @@
"[-dt] [-p DIR] TEMPLATE"
#define mktemp_full_usage \
"Create a temporary file with its name based on TEMPLATE.\n" \
- "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX)." \
- "\n\nOptions:\n" \
- " -d Make a directory instead of a file\n" \
- /* " -q Fail silently if an error occurs\n" - we ignore it */ \
- " -t Generate a path rooted in temporary directory\n" \
- " -p DIR Use DIR as a temporary directory (implies -t)\n" \
- "\n" \
+ "TEMPLATE is any name with six 'Xs' (i.e., /tmp/temp.XXXXXX).\n" \
+ "\nOptions:" \
+ "\n -d Make a directory instead of a file" \
+/* "\n -q Fail silently if an error occurs" - we ignore it */ \
+ "\n -t Generate a path rooted in temporary directory" \
+ "\n -p DIR Use DIR as a temporary directory (implies -t)" \
+ "\n" \
+ "\n" \
"For -t or -p, directory is chosen as follows:\n" \
- "$TMPDIR if set, else -p DIR, else /tmp"
+ "$TMPDIR if set, else -p DIR, else /tmp" \
#define mktemp_example_usage \
"$ mktemp /tmp/temp.XXXXXX\n" \
@@ -2449,13 +2468,14 @@
#define modprobe_trivial_usage \
"[-knqrsv] MODULE [symbol=value...]"
#define modprobe_full_usage \
- "Options:\n" \
- " -k Make module autoclean-able\n" \
- " -n Dry run\n" \
- " -q Quiet\n" \
- " -r Remove module (stacks) or do autoclean\n" \
- " -s Report via syslog instead of stderr\n" \
- " -v Verbose"
+ "Options:" \
+ "\n -k Make module autoclean-able" \
+ "\n -n Dry run" \
+ "\n -q Quiet" \
+ "\n -r Remove module (stacks) or do autoclean" \
+ "\n -s Report via syslog instead of stderr" \
+ "\n -v Verbose" \
+
#define modprobe_notes_usage \
"modprobe can (un)load a stack of modules, passing each module options (when\n" \
"loading). modprobe uses a configuration file to determine what option(s) to\n" \
@@ -2520,24 +2540,25 @@
"[FILE...]"
#define more_full_usage \
"View FILE or standard input one screenful at a time"
+
#define more_example_usage \
"$ dmesg | more\n"
#define mount_trivial_usage \
"[flags] DEVICE NODE [-o options,more-options]"
#define mount_full_usage \
- "Mount a filesystem. Filesystem autodetection requires /proc be mounted." \
- "\n\nOptions:\n" \
- " -a Mount all filesystems in fstab\n" \
+ "Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n" \
+ "\nOptions:" \
+ "\n -a Mount all filesystems in fstab" \
USE_FEATURE_MOUNT_FAKE( \
- " -f "USE_FEATURE_MTAB_SUPPORT("Update /etc/mtab, but ")"don't mount\n" \
+ "\n -f "USE_FEATURE_MTAB_SUPPORT("Update /etc/mtab, but ")"don't mount" \
) \
USE_FEATURE_MTAB_SUPPORT( \
- " -n Don't update /etc/mtab\n" \
+ "\n -n Don't update /etc/mtab" \
) \
- " -r Read-only mount\n" \
- " -t fs-type Filesystem type\n" \
- " -w Read-write mount (default)\n" \
+ "\n -r Read-only mount" \
+ "\n -t fs-type Filesystem type" \
+ "\n -w Read-write mount (default)" \
"\n" \
"-o option:\n" \
USE_FEATURE_MOUNT_LOOP( \
@@ -2561,7 +2582,8 @@
" ro/rw Mount for read-only / read-write\n" \
"\n" \
"There are EVEN MORE flags that are specific to each filesystem\n" \
- "You'll have to see the written documentation for those filesystems"
+ "You'll have to see the written documentation for those filesystems" \
+
#define mount_example_usage \
"$ mount\n" \
"/dev/hda3 on / type minix (rw)\n" \
@@ -2576,11 +2598,12 @@
#define mountpoint_trivial_usage \
"[-q] <[-d] DIR | -x DEVICE>"
#define mountpoint_full_usage \
- "mountpoint checks if the directory is a mountpoint" \
- "\n\nOptions:\n" \
- " -q Quiet\n" \
- " -d Print major/minor device number of the filesystem\n" \
- " -x Print major/minor device number of the blockdevice"
+ "mountpoint checks if the directory is a mountpoint\n" \
+ "\nOptions:" \
+ "\n -q Quiet" \
+ "\n -d Print major/minor device number of the filesystem" \
+ "\n -x Print major/minor device number of the blockdevice" \
+
#define mountpoint_example_usage \
"$ mountpoint /proc\n" \
"/proc is not a mountpoint\n" \
@@ -2591,31 +2614,35 @@
"[-f device] opcode value"
#define mt_full_usage \
"Control magnetic tape drive operation\n" \
- "\nAvailable Opcodes:\n\n" \
+ "\n" \
+ "Available Opcodes:\n" \
+ "\n" \
"bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \
"fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \
"ras3 reset retension rewind rewoffline seek setblk setdensity\n" \
- "setpart tell unload unlock weof wset"
+ "setpart tell unload unlock weof wset" \
#define mv_trivial_usage \
"[OPTION]... SOURCE DEST\n" \
"or: mv [OPTION]... SOURCE... DIRECTORY"
#define mv_full_usage \
- "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY" \
- "\n\nOptions:\n" \
- " -f Don't prompt before overwriting\n" \
- " -i Interactive, prompt before overwrite"
+ "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY\n" \
+ "\nOptions:" \
+ "\n -f Don't prompt before overwriting" \
+ "\n -i Interactive, prompt before overwrite" \
+
#define mv_example_usage \
"$ mv /tmp/foo /bin/bar\n"
#define nameif_trivial_usage \
"[-s] [-c FILE] [{IFNAME MACADDR}]"
#define nameif_full_usage \
- "Rename network interface while it in the down state" \
- "\n\nOptions:\n" \
- " -c FILE Use configuration file (default is /etc/mactab)\n" \
- " -s Use syslog (LOCAL0 facility)\n" \
- " IFNAME MACADDR new_interface_name interface_mac_address"
+ "Rename network interface while it in the down state\n" \
+ "\nOptions:" \
+ "\n -c FILE Use configuration file (default is /etc/mactab)" \
+ "\n -s Use syslog (LOCAL0 facility)" \
+ "\n IFNAME MACADDR new_interface_name interface_mac_address" \
+
#define nameif_example_usage \
"$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \
" or\n" \
@@ -2636,16 +2663,16 @@
"Open a pipe to IP:port" USE_NC_EXTRA(" or file") \
NC_OPTIONS_STR \
USE_NC_EXTRA( \
- "\n -e Exec rest of command line after connect" \
- "\n -i SECS Delay interval for lines sent" \
- "\n -w SECS Timeout for connect" \
- "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
+ "\n -e Exec rest of command line after connect" \
+ "\n -i SECS Delay interval for lines sent" \
+ "\n -w SECS Timeout for connect" \
+ "\n -f FILE Use file (ala /dev/ttyS0) instead of network" \
) \
USE_NC_SERVER( \
- "\n -l Listen mode, for inbound connects" \
+ "\n -l Listen mode, for inbound connects" \
USE_NC_EXTRA( \
- "\n (use -l twice with -e for persistent server)") \
- "\n -p PORT Local port number" \
+ "\n (use -l twice with -e for persistent server)") \
+ "\n -p PORT Local port number" \
)
#define nc_notes_usage "" \
@@ -2669,26 +2696,28 @@
#define nc_trivial_usage \
"[-options] hostname port - connect" \
- USE_NC_SERVER("\nnc [-options] -l -p port [hostname] [port] - listen")
+ USE_NC_SERVER("\n" \
+ "nc [-options] -l -p port [hostname] [port] - listen")
#define nc_full_usage \
+ "Options:" \
+ "\n -e prog [args] Program to exec after connect (must be last)" \
USE_NC_SERVER( \
- "-l Listen mode, for inbound connects\n" \
+ "\n -l Listen mode, for inbound connects" \
) \
- "-n Don't do DNS resolution" \
- "\n-s addr Local address" \
- "\n-p port Local port" \
- "\n-u UDP mode" \
- "\n-v Verbose (cumulative: -vv)" \
- "\n-w secs Timeout for connects and final net reads" \
+ "\n -n Don't do DNS resolution" \
+ "\n -s addr Local address" \
+ "\n -p port Local port" \
+ "\n -u UDP mode" \
+ "\n -v Verbose (cumulative: -vv)" \
+ "\n -w secs Timeout for connects and final net reads" \
USE_NC_EXTRA( \
- "\n-i sec Delay interval for lines sent" /* ", ports scanned" */ \
- "\n-o file Hex dump of traffic" \
- "\n-z Zero-I/O mode (scanning)" \
+ "\n -i sec Delay interval for lines sent" /* ", ports scanned" */ \
+ "\n -o file Hex dump of traffic" \
+ "\n -z Zero-I/O mode (scanning)" \
) \
- "\n-e prog [args] Program to exec after connect (must be last)" \
-/* "\n-r Randomize local and remote ports" */
-/* "\n-g gateway Source-routing hop point[s], up to 8" */
-/* "\n-G num Source-routing pointer: 4, 8, 12, ..." */
+/* "\n -r Randomize local and remote ports" */
+/* "\n -g gateway Source-routing hop point[s], up to 8" */
+/* "\n -G num Source-routing pointer: 4, 8, 12, ..." */
/* "\nport numbers can be individual or ranges: lo-hi [inclusive]" */
#endif
@@ -2696,8 +2725,8 @@
#define netstat_trivial_usage \
"[-laentuwxr"USE_FEATURE_NETSTAT_WIDE("W")"]"
#define netstat_full_usage \
- "Display networking information" \
- "\n\nOptions:" \
+ "Display networking information\n" \
+ "\nOptions:" \
"\n -l Display listening server sockets" \
"\n -a Display all sockets (default: connected)" \
"\n -e Display other/more information" \
@@ -2714,9 +2743,9 @@
#define nice_trivial_usage \
"[-n ADJUST] [COMMAND [ARG]...]"
#define nice_full_usage \
- "Run a program with modified scheduling priority" \
- "\n\nOptions:\n" \
- " -n ADJUST Adjust the scheduling priority by ADJUST"
+ "Run a program with modified scheduling priority\n" \
+ "\nOptions:" \
+ "\n -n ADJUST Adjust the scheduling priority by ADJUST" \
#define nmeter_trivial_usage \
"format_string"
@@ -2738,7 +2767,8 @@
"%b Monitor block io\n" \
"%Nt Show time (with N decimal points)\n" \
"%Nd Milliseconds between updates (default=1000)\n" \
- "%r Print <cr> instead of <lf> at EOL"
+ "%r Print <cr> instead of <lf> at EOL" \
+
#define nmeter_example_usage \
"nmeter '%250d%t %20c int %i bio %b mem %m forks%p'"
@@ -2778,35 +2808,35 @@
#define passwd_trivial_usage \
"[OPTION] [name]"
#define passwd_full_usage \
- "Change a user password. If no name is specified,\n" \
- "changes the password for the current user." \
- "\n\nOptions:\n" \
- " -a Define which algorithm shall be used for the password\n" \
- " (choices: des, md5)\n" /* ", sha1)" */ \
- " -d Delete the password for the specified user account\n" \
- " -l Locks (disables) the specified user account\n" \
- " -u Unlocks (re-enables) the specified user account"
+ "Change user's password. If no name is specified,\n" \
+ "changes the password for the current user.\n" \
+ "\nOptions:" \
+ "\n -a Algorithm to use for password (choices: des, md5)" /* ", sha1)" */ \
+ "\n -d Delete password for the account" \
+ "\n -l Lock (disable) account" \
+ "\n -u Unlock (re-enable) account" \
#define chpasswd_trivial_usage \
USE_GETOPT_LONG("[--md5|--encrypt]") SKIP_GETOPT_LONG("[-m|-e]")
#define chpasswd_full_usage \
"Read user:password information from stdin\n" \
- "and update /etc/passwd accordingly." \
- "\n\nOptions:" \
+ "and update /etc/passwd accordingly.\n" \
+ "\nOptions:" \
USE_GETOPT_LONG( \
- "\n -e,--encrypt Supplied passwords are in encrypted form" \
- "\n -m,--md5 Use MD5 encryption instead of DES" \
+ "\n -e,--encrypt Supplied passwords are in encrypted form" \
+ "\n -m,--md5 Use MD5 encryption instead of DES" \
) \
SKIP_GETOPT_LONG( \
- "\n -e Supplied passwords are in encrypted form" \
- "\n -m Use MD5 encryption instead of DES" \
+ "\n -e Supplied passwords are in encrypted form" \
+ "\n -m Use MD5 encryption instead of DES" \
)
#define patch_trivial_usage \
- "[-p num] [-i diff]"
+ "[-p NUM] [-i DIFF]"
#define patch_full_usage \
- " -p NUM Strip NUM leading components from file names\n" \
- " -i DIFF Read DIFF instead of stdin"
+ " -p NUM Strip NUM leading components from file names" \
+ "\n -i DIFF Read DIFF instead of stdin" \
+
#define patch_example_usage \
"$ patch -p1 < example.diff\n" \
"$ patch -p0 -i example.diff"
@@ -2814,14 +2844,14 @@
#define pgrep_trivial_usage \
"[-flnovx] pattern"
#define pgrep_full_usage \
- "Display process(es) selected by regex pattern" \
- "\n\nOptions:\n" \
- " -l Show command name too\n" \
- " -f Match against entire command line\n" \
- " -n Show the newest process only\n" \
- " -o Show the oldest process only\n" \
- " -v Negate the matching\n" \
- " -x Match whole name (not substring)"
+ "Display process(es) selected by regex pattern\n" \
+ "\nOptions:" \
+ "\n -l Show command name too" \
+ "\n -f Match against entire command line" \
+ "\n -n Show the newest process only" \
+ "\n -o Show the oldest process only" \
+ "\n -v Negate the matching" \
+ "\n -x Match whole name (not substring)" \
#if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT)
#define pidof_trivial_usage \
@@ -2839,7 +2869,8 @@
"\n -s Show only one PID") \
USE_FEATURE_PIDOF_OMIT( \
"\n -o PID Omit given pid" \
- "\n Use %PPID to omit pid of pidof's parent")
+ "\n Use %PPID to omit pid of pidof's parent") \
+
#define pidof_example_usage \
"$ pidof init\n" \
"1\n" \
@@ -2861,24 +2892,26 @@
#define ping_trivial_usage \
"[OPTION]... host"
#define ping_full_usage \
- "Send ICMP ECHO_REQUEST packets to network hosts" \
- "\n\nOptions:\n" \
- " -4, -6 Force IPv4 or IPv6 hostname resolution\n" \
- " -c CNT Send only CNT pings\n" \
- " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
- " -I iface/IP Use interface or IP address as source\n" \
- " -q Quiet, only displays output at start\n" \
- " and when finished"
+ "Send ICMP ECHO_REQUEST packets to network hosts\n" \
+ "\nOptions:" \
+ "\n -4, -6 Force IPv4 or IPv6 hostname resolution" \
+ "\n -c CNT Send only CNT pings" \
+ "\n -s SIZE Send SIZE data bytes in packets (default=56)" \
+ "\n -I iface/IP Use interface or IP address as source" \
+ "\n -q Quiet, only displays output at start" \
+ "\n and when finished" \
+
#define ping6_trivial_usage \
"[OPTION]... host"
#define ping6_full_usage \
- "Send ICMP ECHO_REQUEST packets to network hosts" \
- "\n\nOptions:\n" \
- " -c CNT Send only CNT pings\n" \
- " -s SIZE Send SIZE data bytes in packets (default=56)\n" \
- " -I iface/IP Use interface or IP address as source\n" \
- " -q Quiet, only displays output at start\n" \
- " and when finished"
+ "Send ICMP ECHO_REQUEST packets to network hosts\n" \
+ "\nOptions:" \
+ "\n -c CNT Send only CNT pings" \
+ "\n -s SIZE Send SIZE data bytes in packets (default=56)" \
+ "\n -I iface/IP Use interface or IP address as source" \
+ "\n -q Quiet, only displays output at start" \
+ "\n and when finished" \
+
#endif
#define ping_example_usage \
"$ ping localhost\n" \
@@ -2906,23 +2939,23 @@
#define pkill_trivial_usage \
"[-l] | [-fnovx] [-signal] pattern"
#define pkill_full_usage \
- "Send a signal to process(es) selected by regex pattern" \
- "\n\nOptions:\n" \
- " -l List all signals\n" \
- " -f Match against entire command line\n" \
- " -n Signal the newest process only\n" \
- " -o Signal the oldest process only\n" \
- " -v Negate the matching\n" \
- " -x Match whole name (not substring)"
+ "Send a signal to process(es) selected by regex pattern\n" \
+ "\nOptions:" \
+ "\n -l List all signals" \
+ "\n -f Match against entire command line" \
+ "\n -n Signal the newest process only" \
+ "\n -o Signal the oldest process only" \
+ "\n -v Negate the matching" \
+ "\n -x Match whole name (not substring)" \
#define poweroff_trivial_usage \
"[-d delay] [-n] [-f]"
#define poweroff_full_usage \
- "Halt and shut off power" \
- "\n\nOptions:\n" \
- " -d Delay interval for halting\n" \
- " -n No call to sync()\n" \
- " -f Force power off (don't go through init)"
+ "Halt and shut off power\n" \
+ "\nOptions:" \
+ "\n -d Delay interval for halting" \
+ "\n -n No call to sync()" \
+ "\n -f Force power off (don't go through init)" \
#define printenv_trivial_usage \
"[VARIABLES...]"
@@ -2945,13 +2978,13 @@
#define ps_trivial_usage \
""
#define ps_full_usage \
- "Report process status" \
- "\n\nOptions:" \
- "\n -o col1,col2=header Select columns for display" \
+ "Report process status\n" \
+ "\nOptions:" \
+ "\n -o col1,col2=header Select columns for display" \
#else /* !ENABLE_DESKTOP */
-#if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE
+#if !ENABLE_SELINUX && !ENABLE_FEATURE_PS_WIDE
#define USAGE_PS "\nThis version of ps accepts no options"
#else
#define USAGE_PS "\nOptions:"
@@ -2963,9 +2996,11 @@
"Report process status\n" \
USAGE_PS \
USE_SELINUX( \
- "\n -Z Show SE Linux context") \
+ "\n -Z Show SE Linux context" \
+ ) \
USE_FEATURE_PS_WIDE( \
- "\n w Wide output")
+ "\n w Wide output" \
+ )
#endif /* ENABLE_DESKTOP */
@@ -2985,8 +3020,8 @@
#define pscan_trivial_usage \
"[-p MIN_PORT] [-P MAX_PORT] [-t TIMEOUT] [-T MIN_RTT] HOST"
#define pscan_full_usage \
- "Scan a host, print all open ports" \
- "\n\nOptions:" \
+ "Scan a host, print all open ports\n" \
+ "\nOptions:" \
"\n -p Scan from this port (default 1)" \
"\n -P Scan up to this port (default 1024)" \
"\n -t Timeout (default 5000 ms)" \
@@ -3010,10 +3045,10 @@
#define rdate_trivial_usage \
"[-sp] HOST"
#define rdate_full_usage \
- "Get and possibly set the system date and time from a remote HOST" \
- "\n\nOptions:\n" \
- " -s Set the system date and time (default)\n" \
- " -p Print the date and time"
+ "Get and possibly set the system date and time from a remote HOST\n" \
+ "\nOptions:" \
+ "\n -s Set the system date and time (default)" \
+ "\n -p Print the date and time" \
#define readahead_trivial_usage \
"[FILE]..."
@@ -3025,24 +3060,24 @@
USE_FEATURE_READLINK_FOLLOW("[-f] ") "FILE"
#define readlink_full_usage \
"Display the value of a symlink" \
- USE_FEATURE_READLINK_FOLLOW( \
- "\n\nOptions:\n" \
- " -f Canonicalize by following all symlinks")
+ USE_FEATURE_READLINK_FOLLOW( "\n" \
+ "\nOptions:" \
+ "\n -f Canonicalize by following all symlinks") \
#define readprofile_trivial_usage \
"[OPTIONS]..."
#define readprofile_full_usage \
- "Options:\n" \
- " -m mapfile (Default: /boot/System.map)\n" \
- " -p profile (Default: /proc/profile)\n" \
- " -M mult Set the profiling multiplier to mult\n" \
- " -i Print only info about the sampling step\n" \
- " -v Verbose\n" \
- " -a Print all symbols, even if count is 0\n" \
- " -b Print individual histogram-bin counts\n" \
- " -s Print individual counters within functions\n" \
- " -r Reset all the counters (root only)\n" \
- " -n Disable byte order auto-detection"
+ "Options:" \
+ "\n -m mapfile (Default: /boot/System.map)" \
+ "\n -p profile (Default: /proc/profile)" \
+ "\n -M mult Set the profiling multiplier to mult" \
+ "\n -i Print only info about the sampling step" \
+ "\n -v Verbose" \
+ "\n -a Print all symbols, even if count is 0" \
+ "\n -b Print individual histogram-bin counts" \
+ "\n -s Print individual counters within functions" \
+ "\n -r Reset all the counters (root only)" \
+ "\n -n Disable byte order auto-detection" \
#define realpath_trivial_usage \
"pathname..."
@@ -3052,21 +3087,21 @@
#define reboot_trivial_usage \
"[-d delay] [-n] [-f]"
#define reboot_full_usage \
- "Reboot the system" \
- "\n\nOptions:\n" \
- " -d Delay interval for rebooting\n" \
- " -n No call to sync()\n" \
- " -f Force reboot (don't go through init)"
+ "Reboot the system\n" \
+ "\nOptions:" \
+ "\n -d Delay interval for rebooting" \
+ "\n -n No call to sync()" \
+ "\n -f Force reboot (don't go through init)" \
#define renice_trivial_usage \
"{{-n INCREMENT} | PRIORITY} [[-p | -g | -u] ID...]"
#define renice_full_usage \
- "Change priority of running processes" \
- "\n\nOptions:\n" \
- " -n Adjust current nice value (smaller is faster)\n" \
- " -p Process id(s) (default)\n" \
- " -g Process group id(s)\n" \
- " -u Process user name(s) and/or id(s)"
+ "Change priority of running processes\n" \
+ "\nOptions:" \
+ "\n -n Adjust current nice value (smaller is faster)" \
+ "\n -p Process id(s) (default)" \
+ "\n -g Process group id(s)" \
+ "\n -u Process user name(s) and/or id(s)" \
#define reset_trivial_usage \
""
@@ -3082,27 +3117,28 @@
"[-iFnrRv] [-e excludedir]... [-o filename] [-f filename | pathname]"
#define restorecon_full_usage \
"Reset security contexts of files in pathname\n" \
- "\n -i Ignore files that do not exist" \
- "\n -f file File with list of files to process. Use - for stdin" \
- "\n -e directory Directory to exclude" \
- "\n -R,-r Recurse directories" \
- "\n -n Don't change any file labels" \
- "\n -o file Save list of files with incorrect context" \
- "\n -v Verbose" \
- "\n -vv Show changed labels" \
- "\n -F Force reset of context to match file_context" \
- "\n for customizable files, or the user section," \
- "\n if it has changed"
+ "\n -i Ignore files that do not exist" \
+ "\n -f file File with list of files to process. Use - for stdin" \
+ "\n -e directory Directory to exclude" \
+ "\n -R,-r Recurse directories" \
+ "\n -n Don't change any file labels" \
+ "\n -o file Save list of files with incorrect context" \
+ "\n -v Verbose" \
+ "\n -vv Show changed labels" \
+ "\n -F Force reset of context to match file_context" \
+ "\n for customizable files, or the user section," \
+ "\n if it has changed" \
#define rm_trivial_usage \
"[OPTION]... FILE..."
#define rm_full_usage \
"Remove (unlink) the FILE(s). Use '--' to\n" \
- "indicate that all following arguments are non-options." \
- "\n\nOptions:\n" \
- " -i Always prompt before removing\n" \
- " -f Never prompt\n" \
- " -r,-R Remove directories recursively"
+ "indicate that all following arguments are non-options.\n" \
+ "\nOptions:" \
+ "\n -i Always prompt before removing" \
+ "\n -f Never prompt" \
+ "\n -r,-R Remove directories recursively" \
+
#define rm_example_usage \
"$ rm -rf /tmp/foo\n"
@@ -3116,33 +3152,34 @@
#define rmmod_trivial_usage \
"[OPTION]... [MODULE]..."
#define rmmod_full_usage \
- "Unload the specified kernel modules from the kernel" \
- "\n\nOptions:\n" \
- " -a Remove all unused modules (recursively)"
+ "Unload the specified kernel modules from the kernel\n" \
+ "\nOptions:" \
+ "\n -a Remove all unused modules (recursively)" \
+
#define rmmod_example_usage \
"$ rmmod tulip\n"
#define route_trivial_usage \
"[{add|del|delete}]"
#define route_full_usage \
- "Edit the kernel's routing tables" \
- "\n\nOptions:\n" \
- " -n Dont resolve names\n" \
- " -e Display other/more information\n" \
- " -A inet" USE_FEATURE_IPV6("{6}") " Select address family"
+ "Edit the kernel's routing tables\n" \
+ "\nOptions:" \
+ "\n -n Dont resolve names" \
+ "\n -e Display other/more information" \
+ "\n -A inet" USE_FEATURE_IPV6("{6}") " Select address family" \
#define rpm_trivial_usage \
"-i -q[ildc]p package.rpm"
#define rpm_full_usage \
- "Manipulate RPM packages" \
- "\n\nOptions:" \
- "\n -i Install package" \
- "\n -q Query package" \
- "\n -p Query uninstalled package" \
- "\n -i Show information" \
- "\n -l List contents" \
- "\n -d List documents" \
- "\n -c List config files"
+ "Manipulate RPM packages\n" \
+ "\nOptions:" \
+ "\n -i Install package" \
+ "\n -q Query package" \
+ "\n -p Query uninstalled package" \
+ "\n -i Show information" \
+ "\n -l List contents" \
+ "\n -d List documents" \
+ "\n -c List config files" \
#define rpm2cpio_trivial_usage \
"package.rpm"
@@ -3152,45 +3189,45 @@
#define rtcwake_trivial_usage \
"[-a | -l | -u] [-d DEV] [-m MODE] [-s SECS | -t TIME]"
#define rtcwake_full_usage \
- "enter a system sleep state until specified wakeup time\n\n" \
+ "Enter a system sleep state until specified wakeup time\n" \
USE_GETOPT_LONG( \
- " -a,--auto Read clock mode from adjtime\n" \
- " -l,--local Clock is set to local time\n" \
- " -u,--utc Clock is set to UTC time\n" \
- " -d,--device=DEV Specify the RTC device\n" \
- " -m,--mode=MODE Set the sleep state (default: standby)\n" \
- " -s,--seconds=SEC Set the timeout in SEC seconds from now\n" \
- " -t,--time=TIME Set the timeout to TIME seconds from epoch" \
+ "\n -a,--auto Read clock mode from adjtime" \
+ "\n -l,--local Clock is set to local time" \
+ "\n -u,--utc Clock is set to UTC time" \
+ "\n -d,--device=DEV Specify the RTC device" \
+ "\n -m,--mode=MODE Set the sleep state (default: standby)" \
+ "\n -s,--seconds=SEC Set the timeout in SEC seconds from now" \
+ "\n -t,--time=TIME Set the timeout to TIME seconds from epoch" \
) \
SKIP_GETOPT_LONG( \
- " -a Read clock mode from adjtime\n" \
- " -l Clock is set to local time\n" \
- " -u Clock is set to UTC time\n" \
- " -d DEV Specify the RTC device\n" \
- " -m MODE Set the sleep state (default: standby)\n" \
- " -s SEC Set the timeout in SEC seconds from now\n" \
- " -t TIME Set the timeout to TIME seconds from epoch" \
+ "\n -a Read clock mode from adjtime" \
+ "\n -l Clock is set to local time" \
+ "\n -u Clock is set to UTC time" \
+ "\n -d DEV Specify the RTC device" \
+ "\n -m MODE Set the sleep state (default: standby)" \
+ "\n -s SEC Set the timeout in SEC seconds from now" \
+ "\n -t TIME Set the timeout to TIME seconds from epoch" \
)
#define runcon_trivial_usage \
"[-c] [-u USER] [-r ROLE] [-t TYPE] [-l RANGE] COMMAND [args]\n" \
" runcon CONTEXT COMMAND [args]"
#define runcon_full_usage \
- "Run a program in a different security context\n\n" \
- " CONTEXT Complete security context\n" \
+ "Run a program in a different security context\n" \
+ "\n CONTEXT Complete security context\n" \
USE_GETOPT_LONG( \
- " -c,--compute Compute process transition context before modifying\n" \
- " -t,--type=TYPE Type (for same role as parent)\n" \
- " -u,--user=USER User identity\n" \
- " -r,--role=ROLE Role\n" \
- " -l,--range=RNG Levelrange" \
+ "\n -c,--compute Compute process transition context before modifying" \
+ "\n -t,--type=TYPE Type (for same role as parent)" \
+ "\n -u,--user=USER User identity" \
+ "\n -r,--role=ROLE Role" \
+ "\n -l,--range=RNG Levelrange" \
) \
SKIP_GETOPT_LONG( \
- " -c Compute process transition context before modifying\n" \
- " -t TYPE Type (for same role as parent)\n" \
- " -u USER User identity\n" \
- " -r ROLE Role\n" \
- " -l RNG Levelrange" \
+ "\n -c Compute process transition context before modifying" \
+ "\n -t TYPE Type (for same role as parent)" \
+ "\n -u USER User identity" \
+ "\n -r ROLE Role" \
+ "\n -l RNG Levelrange" \
)
#define run_parts_trivial_usage \
@@ -3253,23 +3290,23 @@
"\n -a Append output" \
"\n -c Run COMMAND, not shell" \
"\n -f Flush output after each write" \
- "\n -q Quiet"
+ "\n -q Quiet" \
#define sed_trivial_usage \
"[-efinr] pattern [files...]"
#define sed_full_usage \
- "Options:\n" \
- " -e script Add the script to the commands to be executed\n" \
- " -f scriptfile Add scriptfile contents to the\n" \
- " commands to be executed\n" \
- " -i Edit files in-place\n" \
- " -n Suppress automatic printing of pattern space\n" \
- " -r Use extended regular expression syntax\n" \
- "\n" \
- "If no -e or -f is given, the first non-option argument is taken as the sed\n" \
- "script to interpret. All remaining arguments are names of input files; if no\n" \
- "input files are specified, then the standard input is read. Source files\n" \
- "will not be modified unless -i option is given."
+ "Options:" \
+ "\n -e script Add the script to the commands to be executed" \
+ "\n -f scriptfile Add scriptfile contents to the" \
+ "\n commands to be executed" \
+ "\n -i Edit files in-place" \
+ "\n -n Suppress automatic printing of pattern space" \
+ "\n -r Use extended regular expression syntax" \
+ "\n" \
+ "\nIf no -e or -f is given, the first non-option argument is taken as the sed" \
+ "\nscript to interpret. All remaining arguments are names of input files; if no" \
+ "\ninput files are specified, then the standard input is read. Source files" \
+ "\nwill not be modified unless -i option is given." \
#define sed_example_usage \
"$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \
@@ -3282,16 +3319,16 @@
"[-w timeout] [-U user] [-P password] [-X]\n" \
"-t to [-t to]... [-n] [-s subject] [-c charset] server[:port] from [body] [attachment ...]"
#define sendmail_full_usage \
- "Send an email with optional attachments." \
- "\n\nOptions:\n" \
- " -w timeout Set timeout on network operations\n" \
- " -U username Authenticate with specified username/password\n" \
- " -P password\n" \
- " -t address Recipient(s). May be repeated\n" \
- " -X Use openssl connection helper for secured servers\n" \
- " -n Request delivery notification to sender\n" \
- " -s subject Subject\n" \
- " -c charset Assumed charset for body and subject [utf-8]"
+ "Send an email.\n" \
+ "\nOptions:" \
+ "\n -w timeout Set timeout on network operations" \
+ "\n -U username Authenticate with specified username/password" \
+ "\n -P password" \
+ "\n -t address Recipient(s). May be repeated" \
+ "\n -X Use openssl connection helper for secured servers" \
+ "\n -n Request delivery notification to sender" \
+ "\n -s subject Subject" \
+ "\n -c charset Assumed charset for body and subject [utf-8]" \
#define seq_trivial_usage \
"[first [increment]] last"
@@ -3306,15 +3343,15 @@
#define sestatus_trivial_usage \
"[-vb]"
#define sestatus_full_usage \
- "-v Verbose\n" \
- "-b Display current state of booleans"
+ " -v Verbose" \
+ "\n -b Display current state of booleans" \
#define setconsole_trivial_usage \
"[-r" USE_FEATURE_SETCONSOLE_LONG_OPTIONS("|--reset") "] [DEVICE]"
#define setconsole_full_usage \
- "Redirect system console output to DEVICE (default: /dev/tty)" \
- "\n\nOptions:\n" \
- " -r Reset output to /dev/console"
+ "Redirect system console output to DEVICE (default: /dev/tty)\n" \
+ "\nOptions:" \
+ "\n -r Reset output to /dev/console" \
#define setenforce_trivial_usage \
"[Enforcing | Permissive | 1 | 0]"
@@ -3326,24 +3363,23 @@
" [-c policyfile] spec_file" \
) \
" pathname"
-
#define setfiles_full_usage \
- "Reset file contexts under pathname according to spec_file" \
+ "Reset file contexts under pathname according to spec_file\n" \
USE_FEATURE_SETFILES_CHECK_OPTION( \
- "\n -c file Check the validity of the contexts against the specified binary policy" \
+ "\n -c file Check the validity of the contexts against the specified binary policy" \
) \
- "\n -d Show which specification matched each file" \
- "\n -l Log changes in file labels to syslog" \
- "\n -n Don't change any file labels" \
- "\n -q Suppress warnings" \
- "\n -r dir Use an altenate root path" \
- "\n -e dir Exclude directory" \
- "\n -F Force reset of context to match file_context for customizable files" \
- "\n -o file Save list of files with incorrect context" \
- "\n -s Take a list of files from standard input (instead of command line)" \
- "\n -v Show changes in file labels, if type or role are changing" \
- "\n -vv Show changes in file labels, if type, role, or user are changing" \
- "\n -W Display warnings about entries that had no matching files"
+ "\n -d Show which specification matched each file" \
+ "\n -l Log changes in file labels to syslog" \
+ "\n -n Don't change any file labels" \
+ "\n -q Suppress warnings" \
+ "\n -r dir Use an altenate root path" \
+ "\n -e dir Exclude directory" \
+ "\n -F Force reset of context to match file_context for customizable files" \
+ "\n -o file Save list of files with incorrect context" \
+ "\n -s Take a list of files from standard input (instead of command line)" \
+ "\n -v Show changes in file labels, if type or role are changing" \
+ "\n -vv Show changes in file labels, if type, role, or user are changing" \
+ "\n -W Display warnings about entries that had no matching files" \
#define setkeycodes_trivial_usage \
"SCANCODE KEYCODE..."
@@ -3351,7 +3387,8 @@
"Set entries into the kernel's scancode-to-keycode map,\n" \
"allowing unusual keyboards to generate usable keycodes.\n\n" \
"SCANCODE may be either xx or e0xx (hexadecimal),\n" \
- "and KEYCODE is given in decimal"
+ "and KEYCODE is given in decimal" \
+
#define setkeycodes_example_usage \
"$ setkeycodes e030 127\n"
@@ -3367,10 +3404,11 @@
"Change boolean setting"
#define setsid_trivial_usage \
- "program [arg...]"
+ "PROG [ARG...]"
#define setsid_full_usage \
- "Run any program in a new session by calling setsid() before\n" \
- "exec'ing the rest of its arguments. See setsid(2) for details."
+ "Run PROG in a new session. PROG will have no controlling terminal\n" \
+ "and will not be affected by keyboard signals (Ctrl-C etc).\n" \
+ "See setsid(2) for details." \
#define lash_trivial_usage \
"[FILE]...\n" \
@@ -3387,14 +3425,13 @@
"[OPTION] [FILEs...]" \
USE_FEATURE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]")
#define sha1sum_full_usage \
- "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n" \
- "With no FILE, or when FILE is -, read standard input." \
- "\n\nOptions:\n" \
- USE_FEATURE_MD5_SHA1_SUM_CHECK( \
- " -c Check SHA1 sums against given list\n" \
- "\nThe following two options are useful only when verifying checksums:\n" \
- " -s Don't output anything, status code shows success\n" \
- " -w Warn about improperly formatted SHA1 checksum lines")
+ "Print" USE_FEATURE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums." \
+ USE_FEATURE_MD5_SHA1_SUM_CHECK( "\n" \
+ "\nOptions:" \
+ "\n -c Check SHA1 sums against given list" \
+ "\n -s Don't output anything, status code shows success" \
+ "\n -w Warn about improperly formatted SHA1 checksum lines" \
+ )
#define slattach_trivial_usage \
"[-cehmLF] [-s speed] [-p protocol] DEVICEs"
@@ -3429,8 +3466,8 @@
USE_FEATURE_SORT_BIG("gMcszbdfimSTokt] [-o FILE] [-k start[.offset][opts][,end[.offset][opts]] [-t CHAR") \
"] [FILE]..."
#define sort_full_usage \
- "Sort lines of text in the specified files" \
- "\n\nOptions:" \
+ "Sort lines of text\n" \
+ "\nOptions:" \
USE_FEATURE_SORT_BIG( \
"\n -b Ignore leading blanks" \
"\n -c Check whether input is sorted" \
@@ -3476,9 +3513,10 @@
"[OPTION] [INPUT [PREFIX]]"
#define split_full_usage \
"Options:" \
- "\n -b n[k|m] Split by bytes" \
- "\n -l n Split by lines" \
- "\n -a n Use n letters as suffix"
+ "\n -b n[k|m] Split by bytes" \
+ "\n -l n Split by lines" \
+ "\n -a n Use n letters as suffix" \
+
#define split_example_usage \
"$ split TODO foo\n" \
"$ cat TODO | split -a 2 -l 2 TODO_\n"
@@ -3488,59 +3526,60 @@
USE_GETOPT_LONG("--start|--stop") SKIP_GETOPT_LONG("-S|-K") \
"] ... [-- arguments...]"
#define start_stop_daemon_full_usage \
- "Start and stop services" \
- "\n\nOptions:" \
+ "Start and stop services\n" \
+ "\nOptions:" \
USE_GETOPT_LONG( \
- "\n -S,--start Start" \
- "\n -K,--stop Stop" \
- "\n -a,--startas pathname Starts process specified by pathname" \
- "\n -b,--background Put process into background" \
- "\n -u,--user username|uid Stop this user's processes" \
- "\n -x,--exec executable Program to either start or check" \
- "\n -n,--name process-name Stop processes with this name" \
- "\n -p,--pidfile pid-file Save or load pid using a pid-file" \
- "\n -m,--make-pidfile Create the -p file and enter pid in it" \
- "\n -q,--quiet Quiet" \
+ "\n -S,--start Start" \
+ "\n -K,--stop Stop" \
+ "\n -a,--startas pathname Start process specified by pathname" \
+ "\n -b,--background Put process into background" \
+ "\n -u,--user username|uid Stop this user's processes" \
+ "\n -x,--exec executable Program to either start or check" \
+ "\n -n,--name process-name Stop processes with this name" \
+ "\n -p,--pidfile pid-file Save or load pid using a pid-file" \
+ "\n -m,--make-pidfile Create the -p file and enter pid in it" \
+ "\n -q,--quiet Quiet" \
USE_FEATURE_START_STOP_DAEMON_FANCY( \
- "\n -o,--oknodo Exit status 0 if nothing done" \
- "\n -v,--verbose Verbose" \
- "\n -N,--nicelevel N Add N to process's nice level" \
+ "\n -o,--oknodo Exit status 0 if nothing done" \
+ "\n -v,--verbose Verbose" \
+ "\n -N,--nicelevel N Add N to process's nice level" \
) \
- "\n -s,--signal signal Signal to send (default TERM)" \
- "\n -c,--chuid user[:[grp]] Change to specified user/group" \
+ "\n -s,--signal signal Signal to send (default TERM)" \
+ "\n -c,--chuid user[:[grp]] Change to specified user/group" \
) \
SKIP_GETOPT_LONG( \
- "\n -S Start" \
- "\n -K Stop" \
- "\n -a pathname Starts process specified by pathname" \
- "\n -b Put process into background" \
- "\n -u username|uid Stop this user's processes" \
- "\n -x executable Program to either start or check" \
- "\n -n process-name Stop processes with this name" \
- "\n -p pid-file Save or load pid using a pid-file" \
- "\n -m Create the -p file and enter pid in it" \
- "\n -q Quiet" \
+ "\n -S Start" \
+ "\n -K Stop" \
+ "\n -a pathname Start process specified by pathname" \
+ "\n -b Put process into background" \
+ "\n -u username|uid Stop this user's processes" \
+ "\n -x executable Program to either start or check" \
+ "\n -n process-name Stop processes with this name" \
+ "\n -p pid-file Save or load pid using a pid-file" \
+ "\n -m Create the -p file and enter pid in it" \
+ "\n -q Quiet" \
USE_FEATURE_START_STOP_DAEMON_FANCY( \
- "\n -o Exit status 0 if nothing done" \
- "\n -v Verbose" \
- "\n -N N Add N to process's nice level" \
+ "\n -o Exit status 0 if nothing done" \
+ "\n -v Verbose" \
+ "\n -N N Add N to process's nice level" \
) \
- "\n -s signal Signal to send (default TERM)" \
- "\n -c user[:[grp]] Change to specified user/group" \
+ "\n -s signal Signal to send (default TERM)" \
+ "\n -c user[:[grp]] Change to specified user/group" \
)
#define stat_trivial_usage \
"[OPTION] FILE..."
#define stat_full_usage \
- "Display file (default) or filesystem status" \
- "\n\nOptions:\n" \
+ "Display file (default) or filesystem status\n" \
+ "\nOptions:" \
USE_FEATURE_STAT_FORMAT( \
- " -c fmt Use the specified format\n") \
- " -f Display filesystem status\n" \
- " -L Dereference links\n" \
- " -t Display info in terse form" \
+ "\n -c fmt Use the specified format" \
+ ) \
+ "\n -f Display filesystem status" \
+ "\n -L Dereference links" \
+ "\n -t Display info in terse form" \
USE_SELINUX( \
- "\n -Z Print security context" \
+ "\n -Z Print security context" \
) \
USE_FEATURE_STAT_FORMAT( \
"\n\nValid format sequences for files:\n" \
@@ -3591,47 +3630,47 @@
#define strings_trivial_usage \
"[-afo] [-n length] [file...]"
#define strings_full_usage \
- "Display printable strings in a binary file" \
- "\n\nOptions:" \
- "\n -a Scan whole file (default)" \
- "\n -f Precede strings with filenames" \
- "\n -n N At least N characters form a string (default 4)" \
- "\n -o Precede strings with decimal offsets"
+ "Display printable strings in a binary file\n" \
+ "\nOptions:" \
+ "\n -a Scan whole file (default)" \
+ "\n -f Precede strings with filenames" \
+ "\n -n N At least N characters form a string (default 4)" \
+ "\n -o Precede strings with decimal offsets" \
#define stty_trivial_usage \
"[-a|g] [-F DEVICE] [SETTING]..."
#define stty_full_usage \
"Without arguments, prints baud rate, line discipline,\n" \
- "and deviations from stty sane" \
- "\n\nOptions:" \
- "\n -F DEVICE Open device instead of stdin" \
- "\n -a Print all current settings in human-readable form" \
- "\n -g Print in stty-readable form" \
- "\n [SETTING] See manpage"
+ "and deviations from stty sane\n" \
+ "\nOptions:" \
+ "\n -F DEVICE Open device instead of stdin" \
+ "\n -a Print all current settings in human-readable form" \
+ "\n -g Print in stty-readable form" \
+ "\n [SETTING] See manpage" \
#define su_trivial_usage \
"[OPTION]... [-] [username]"
#define su_full_usage \
- "Change user id or become root" \
- "\n\nOptions:" \
- "\n -p, -m Preserve environment" \
- "\n -c Command to pass to 'sh -c'" \
- "\n -s Shell to use instead of default shell"
+ "Change user id or become root\n" \
+ "\nOptions:" \
+ "\n -p, -m Preserve environment" \
+ "\n -c Command to pass to 'sh -c'" \
+ "\n -s Shell to use instead of default shell" \
#define sulogin_trivial_usage \
"[OPTION]... [tty-device]"
#define sulogin_full_usage \
- "Single user login" \
- "\n\nOptions:" \
- "\n -t Timeout"
+ "Single user login\n" \
+ "\nOptions:" \
+ "\n -t Timeout" \
#define sum_trivial_usage \
"[rs] [files...]"
#define sum_full_usage \
- "Checksum and count the blocks in a file" \
- "\n\nOptions:\n" \
- " -r Use BSD sum algorithm (1K blocks)\n" \
- " -s Use System V sum algorithm (512byte blocks)"
+ "Checksum and count the blocks in a file\n" \
+ "\nOptions:" \
+ "\n -r Use BSD sum algorithm (1K blocks)" \
+ "\n -s Use System V sum algorithm (512byte blocks)" \
#define sv_trivial_usage \
"[-v] [-w sec] command service..."
@@ -3647,36 +3686,36 @@
"exit: send TERM and CONT signals to service and log service. If they exit,\n" \
" runsv exits too\n" \
"pause, cont, hup, alarm, interrupt, quit, 1, 2, term, kill: send\n" \
- "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service"
+ "STOP, CONT, HUP, ALRM, INT, QUIT, USR1, USR2, TERM, KILL signal to service" \
#define svlogd_trivial_usage \
"[-ttv] [-r c] [-R abc] [-l len] [-b buflen] dir..."
#define svlogd_full_usage \
"Continuously read log data from standard input, optionally " \
"filter log messages, and write the data to one or more automatically " \
- "rotated logs"
+ "rotated logs" \
#define swapoff_trivial_usage \
"[-a] [DEVICE]"
#define swapoff_full_usage \
- "Stop swapping virtual memory pages on DEVICE" \
- "\n\nOptions:\n" \
- " -a Stop swapping on all swap devices"
+ "Stop swapping on DEVICE\n" \
+ "\nOptions:" \
+ "\n -a Stop swapping on all swap devices" \
#define swapon_trivial_usage \
"[-a] [DEVICE]"
#define swapon_full_usage \
- "Start swapping virtual memory pages on DEVICE" \
- "\n\nOptions:\n" \
- " -a Start swapping on all swap devices"
+ "Start swapping on DEVICE\n" \
+ "\nOptions:" \
+ "\n -a Start swapping on all swap devices" \
#define switch_root_trivial_usage \
"[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]"
#define switch_root_full_usage \
"Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \
- "and exec NEW_INIT" \
- "\n\nOptions:\n" \
- " -c Redirect console to device on new root"
+ "and exec NEW_INIT\n" \
+ "\nOptions:" \
+ "\n -c Redirect console to device on new root" \
#define sync_trivial_usage \
""
@@ -3686,14 +3725,15 @@
#define sysctl_trivial_usage \
"[OPTIONS]... [VALUE]..."
#define sysctl_full_usage \
- "Configure kernel parameters at runtime" \
- "\n\nOptions:\n" \
- " -n Disable printing of key names\n" \
- " -e Don't warn about unknown keys\n" \
- " -w Change sysctl setting\n" \
- " -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)\n" \
- " -a Display all values\n" \
- " -A Display all values in table form"
+ "Configure kernel parameters at runtime\n" \
+ "\nOptions:" \
+ "\n -n Disable printing of key names" \
+ "\n -e Don't warn about unknown keys" \
+ "\n -w Change sysctl setting" \
+ "\n -p FILE Load sysctl settings from FILE (default /etc/sysctl.conf)" \
+ "\n -a Display all values" \
+ "\n -A Display all values in table form" \
+
#define sysctl_example_usage \
"sysctl [-n] [-e] variable...\n" \
"sysctl [-n] [-e] -w variable=value...\n" \
@@ -3720,9 +3760,10 @@
USE_FEATURE_SYSLOGD_DUP( \
"\n -D Drop duplicates") \
USE_FEATURE_IPC_SYSLOG( \
- "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)")
+ "\n -C[size(KiB)] Log to shared mem buffer (read it using logread)") \
/* NB: -Csize shouldn't have space (because size is optional) */
/* "\n -m MIN Minutes between MARK lines (default=20, 0=off)" */
+
#define syslogd_example_usage \
"$ syslogd -R masterlog:514\n" \
"$ syslogd -R 192.168.1.1:601\n"
@@ -3730,27 +3771,28 @@
#define tac_trivial_usage \
"[FILE]..."
#define tac_full_usage \
- "Concatenates FILE(s) and prints them to stdout in reverse"
+ "Concatenate FILE(s) and print them in reverse"
#define tail_trivial_usage \
"[OPTION]... [FILE]..."
#define tail_full_usage \
"Print last 10 lines of each FILE to standard output.\n" \
"With more than one FILE, precede each with a header giving the\n" \
- "file name. With no FILE, or when FILE is -, read standard input." \
- "\n\nOptions:" \
+ "file name. With no FILE, or when FILE is -, read standard input.\n" \
+ "\nOptions:" \
USE_FEATURE_FANCY_TAIL( \
- "\n -c N[kbm] Output the last N bytes") \
- "\n -n N[kbm] Print last N lines instead of last 10" \
- "\n -f Output data as the file grows" \
+ "\n -c N[kbm] Output the last N bytes") \
+ "\n -n N[kbm] Print last N lines instead of last 10" \
+ "\n -f Output data as the file grows" \
USE_FEATURE_FANCY_TAIL( \
- "\n -q Never output headers giving file names" \
- "\n -s SEC Wait SEC seconds between reads with -f" \
- "\n -v Always output headers giving file names" \
- "\n\n" \
+ "\n -q Never output headers giving file names" \
+ "\n -s SEC Wait SEC seconds between reads with -f" \
+ "\n -v Always output headers giving file names" \
+ "\n\n" \
"If the first character of N (bytes or lines) is a '+', output begins with\n" \
"the Nth item from the start of each file, otherwise, print the last N items\n" \
- "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." )
+ "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) \
+
#define tail_example_usage \
"$ tail -n 1 /etc/resolv.conf\n" \
"nameserver 10.0.0.1\n"
@@ -3762,29 +3804,35 @@
USE_FEATURE_TAR_FROM("[-X FILE] ") \
"[-f TARFILE] [-C DIR] [FILE(s)]..."
#define tar_full_usage \
- "Create, extract, or list files from a tar file" \
- "\n\nOptions:\n" \
+ "Create, extract, or list files from a tar file\n" \
+ "\nOptions:" \
USE_FEATURE_TAR_CREATE( \
- " c Create\n") \
- " x Extract\n" \
- " t List\n" \
- "\nArchive format selection:\n" \
+ "\n c Create") \
+ "\n x Extract" \
+ "\n t List" \
+ "\nArchive format selection:" \
USE_FEATURE_TAR_GZIP( \
- " z Filter the archive through gzip\n") \
+ "\n z Filter the archive through gzip" \
+ ) \
USE_FEATURE_TAR_BZIP2( \
- " j Filter the archive through bzip2\n") \
+ "\n j Filter the archive through bzip2" \
+ ) \
USE_FEATURE_TAR_LZMA( \
- " a Filter the archive through lzma\n") \
+ "\n a Filter the archive through lzma" \
+ ) \
USE_FEATURE_TAR_COMPRESS( \
- " Z Filter the archive through compress\n") \
- "\nFile selection:\n" \
- " f Name of TARFILE or \"-\" for stdin\n" \
- " O Extract to stdout\n" \
+ "\n Z Filter the archive through compress" \
+ ) \
+ "\nFile selection:" \
+ "\n f Name of TARFILE or \"-\" for stdin" \
+ "\n O Extract to stdout" \
USE_FEATURE_TAR_FROM( \
- " exclude File to exclude\n" \
- " X File with names to exclude\n") \
- " C Change to directory DIR before operation\n" \
- " v Verbose"
+ "\n exclude File to exclude" \
+ "\n X File with names to exclude" \
+ ) \
+ "\n C Change to directory DIR before operation" \
+ "\n v Verbose" \
+
#define tar_example_usage \
"$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \
"$ tar -cf /tmp/tarball.tar /usr/local\n"
@@ -3792,9 +3840,10 @@
#define taskset_trivial_usage \
"[OPTIONS] [mask] [pid | command [arg]...]"
#define taskset_full_usage \
- "Set or get CPU affinity" \
- "\n\nOptions:\n" \
- " -p Operate on an existing PID"
+ "Set or get CPU affinity\n" \
+ "\nOptions:" \
+ "\n -p Operate on an existing PID" \
+
#define taskset_example_usage \
"$ taskset 0x7 ./dgemm_test&\n" \
"$ taskset -p 0x1 $!\n" \
@@ -3809,10 +3858,11 @@
#define tee_trivial_usage \
"[OPTION]... [FILE]..."
#define tee_full_usage \
- "Copy standard input to each FILE, and also to standard output" \
- "\n\nOptions:\n" \
- " -a Append to the given FILEs, do not overwrite\n" \
- " -i Ignore interrupt signals (SIGINT)"
+ "Copy standard input to each FILE, and also to standard output\n" \
+ "\nOptions:" \
+ "\n -a Append to the given FILEs, do not overwrite" \
+ "\n -i Ignore interrupt signals (SIGINT)" \
+
#define tee_example_usage \
"$ echo \"Hello\" | tee /tmp/foo\n" \
"$ cat /tmp/foo\n" \
@@ -3825,7 +3875,8 @@
"Connect to telnet server\n" \
"\nOptions:" \
"\n -a Attempt an automatic login with USER variable" \
- "\n -l USER Attempt an automatic login with USER argument"
+ "\n -l USER Attempt an automatic login with USER argument" \
+
#else
#define telnet_trivial_usage \
"HOST [PORT]"
@@ -3837,17 +3888,17 @@
"[OPTION]"
#define telnetd_full_usage \
"Handle incoming telnet connections" \
- SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") \
- "\n\nOptions:" \
- "\n -l LOGIN Exec LOGIN on connect" \
- "\n -f issue_file Display issue_file instead of /etc/issue" \
- "\n -K Close connection as soon as login exits" \
- "\n (normally wait until all programs close slave pty)" \
+ SKIP_FEATURE_TELNETD_STANDALONE(" via inetd") "\n" \
+ "\nOptions:" \
+ "\n -l LOGIN Exec LOGIN on connect" \
+ "\n -f issue_file Display issue_file instead of /etc/issue" \
+ "\n -K Close connection as soon as login exits" \
+ "\n (normally wait until all programs close slave pty)" \
USE_FEATURE_TELNETD_STANDALONE( \
- "\n -p PORT Port to listen to" \
- "\n -b ADDR Address to bind to" \
- "\n -F Run in foreground" \
- "\n -i Run as inetd subservice" \
+ "\n -p PORT Port to listen on" \
+ "\n -b ADDR Address to bind to" \
+ "\n -F Run in foreground" \
+ "\n -i Run as inetd subservice" \
)
#define test_trivial_usage \
@@ -3888,7 +3939,7 @@
"\n immediately. 'msg' is written to the peer before close" \
"\n-h Look up peer's hostname" \
"\n-E Do not set up environment variables" \
- "\n-v Verbose"
+ "\n-v Verbose" \
#define udpsvd_trivial_usage \
"[-hEv] [-c n] [-u user] [-l name] ip port prog"
@@ -3904,45 +3955,46 @@
"\n-c n Handle up to n connections simultaneously" \
"\n-h Look up peer's hostname" \
"\n-E Do not set up environment variables" \
- "\n-v Verbose"
+ "\n-v Verbose" \
#define tftp_trivial_usage \
"[OPTION]... HOST [PORT]"
#define tftp_full_usage \
- "Transfer a file from/to tftp server using \"octet\" mode" \
- "\n\nOptions:" \
- "\n -l FILE Local FILE" \
- "\n -r FILE Remote FILE" \
+ "Transfer a file from/to tftp server using \"octet\" mode\n" \
+ "\nOptions:" \
+ "\n -l FILE Local FILE" \
+ "\n -r FILE Remote FILE" \
USE_FEATURE_TFTP_GET( \
- "\n -g Get file" \
+ "\n -g Get file" \
) \
USE_FEATURE_TFTP_PUT( \
- "\n -p Put file" \
+ "\n -p Put file" \
) \
USE_FEATURE_TFTP_BLOCKSIZE( \
- "\n -b SIZE Transfer blocks of SIZE octets" \
+ "\n -b SIZE Transfer blocks of SIZE octets" \
)
#define time_trivial_usage \
"[OPTION]... COMMAND [ARGS...]"
#define time_full_usage \
"Run the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \
- "COMMAND's resource usage information is displayed." \
- "\n\nOptions:\n" \
- " -v Verbose"
+ "COMMAND's resource usage information is displayed.\n" \
+ "\nOptions:" \
+ "\n -v Verbose" \
#define top_trivial_usage \
"[-b] [-n COUNT] [-d SECONDS]"
#define top_full_usage \
"Provide a view of process activity in real time.\n" \
"Read the status of all processes from /proc each SECONDS\n" \
- "and show the status for however many processes will fit on the screen."
+ "and show the status for however many processes will fit on the screen." \
#define touch_trivial_usage \
"[-c] FILE [FILE...]"
#define touch_full_usage \
- "Update the last-modified date on the given FILE[s]" \
- "\n\nOptions:\n" \
- " -c Do not create any files"
+ "Update the last-modified date on the given FILE[s]\n" \
+ "\nOptions:" \
+ "\n -c Do not create any files" \
+
#define touch_example_usage \
"$ ls -l /tmp/foo\n" \
"/bin/ls: /tmp/foo: No such file or directory\n" \
@@ -3954,11 +4006,12 @@
"[-cds] STRING1 [STRING2]"
#define tr_full_usage \
"Translate, squeeze, and/or delete characters from\n" \
- "standard input, writing to standard output" \
- "\n\nOptions:\n" \
- " -c Take complement of STRING1\n" \
- " -d Delete input characters coded STRING1\n" \
- " -s Squeeze multiple output characters of STRING2 into one character"
+ "standard input, writing to standard output\n" \
+ "\nOptions:" \
+ "\n -c Take complement of STRING1" \
+ "\n -d Delete input characters coded STRING1" \
+ "\n -s Squeeze multiple output characters of STRING2 into one character" \
+
#define tr_example_usage \
"$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \
"hello world\n"
@@ -3966,26 +4019,26 @@
#define traceroute_trivial_usage \
"[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \
" [-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \
- " [-z pausemsecs] host [data size]"
+ " [-z pausemsecs] HOST [data size]"
#define traceroute_full_usage \
- "Trace the route to \"host\"" \
- "\n\nOptions:\n" \
- " -F Set the don't fragment bit\n" \
- " -I Use ICMP ECHO instead of UDP datagrams\n" \
- " -l Display the ttl value of the returned packet\n" \
- " -d Set SO_DEBUG options to socket\n" \
- " -n Print hop addresses numerically rather than symbolically\n" \
- " -r Bypass the normal routing tables and send directly to a host\n" \
- " -v Verbose\n" \
- " -m max_ttl Max time-to-live (max number of hops)\n" \
- " -p port# Base UDP port number used in probes\n" \
- " (default is 33434)\n" \
- " -q nqueries Number of probes per 'ttl' (default 3)\n" \
- " -s src_addr IP address to use as the source address\n" \
- " -t tos Type-of-service in probe packets (default 0)\n" \
- " -w wait Time in seconds to wait for a response\n" \
- " (default 3 sec)\n" \
- " -g Loose source route gateway (8 max)"
+ "Trace the route to HOST\n" \
+ "\nOptions:" \
+ "\n -F Set the don't fragment bit" \
+ "\n -I Use ICMP ECHO instead of UDP datagrams" \
+ "\n -l Display the ttl value of the returned packet" \
+ "\n -d Set SO_DEBUG options to socket" \
+ "\n -n Print hop addresses numerically rather than symbolically" \
+ "\n -r Bypass the normal routing tables and send directly to a host" \
+ "\n -v Verbose" \
+ "\n -m max_ttl Max time-to-live (max number of hops)" \
+ "\n -p port# Base UDP port number used in probes" \
+ "\n (default is 33434)" \
+ "\n -q nqueries Number of probes per 'ttl' (default 3)" \
+ "\n -s src_addr IP address to use as the source address" \
+ "\n -t tos Type-of-service in probe packets (default 0)" \
+ "\n -w wait Time in seconds to wait for a response" \
+ "\n (default 3 sec)" \
+ "\n -g Loose source route gateway (8 max)" \
#define true_trivial_usage \
""
@@ -4000,9 +4053,10 @@
""
#define tty_full_usage \
"Print file name of standard input's terminal" \
- USE_INCLUDE_SUSv2( \
- "\n\nOptions:\n" \
- " -s Print nothing, only return exit status")
+ USE_INCLUDE_SUSv2( "\n" \
+ "\nOptions:" \
+ "\n -s Print nothing, only return exit status" \
+ )
#define tty_example_usage \
"$ tty\n" \
"/dev/tty2\n"
@@ -4028,54 +4082,54 @@
#define udhcpc_full_usage \
USE_GETOPT_LONG( \
" -V,--vendorclass=CLASSID Vendor class identifier" \
- "\n -i,--interface=INTERFACE Interface to use (default eth0)" \
- "\n -H,-h,--hostname=HOSTNAME Client hostname" \
- "\n -c,--clientid=CLIENTID Client identifier" \
- "\n -C,--clientid-none Suppress default client identifier" \
- "\n -p,--pidfile=file Create pidfile" \
- "\n -r,--request=IP IP address to request" \
- "\n -s,--script=file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \
- "\n -t,--retries=N Send up to N request packets" \
- "\n -T,--timeout=N Try to get a lease for N seconds (default 3)" \
- "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \
- "\n -f,--foreground Run in foreground" \
- "\n -b,--background Background if lease is not immediately obtained" \
- "\n -S,--syslog Log to syslog too" \
- "\n -n,--now Exit with failure if lease is not immediately obtained" \
- "\n -q,--quit Quit after obtaining lease" \
- "\n -R,--release Release IP on quit" \
- "\n -O,--request-option=OPT Request DHCP option OPT from server" \
+ "\n -i,--interface=INTERFACE Interface to use (default eth0)" \
+ "\n -H,-h,--hostname=HOSTNAME Client hostname" \
+ "\n -c,--clientid=CLIENTID Client identifier" \
+ "\n -C,--clientid-none Suppress default client identifier" \
+ "\n -p,--pidfile=file Create pidfile" \
+ "\n -r,--request=IP IP address to request" \
+ "\n -s,--script=file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \
+ "\n -t,--retries=N Send up to N request packets" \
+ "\n -T,--timeout=N Try to get a lease for N seconds (default 3)" \
+ "\n -A,--tryagain=N Wait N seconds (default 20) after failure" \
+ "\n -f,--foreground Run in foreground" \
+ "\n -b,--background Background if lease is not immediately obtained" \
+ "\n -S,--syslog Log to syslog too" \
+ "\n -n,--now Exit with failure if lease is not immediately obtained" \
+ "\n -q,--quit Quit after obtaining lease" \
+ "\n -R,--release Release IP on quit" \
+ "\n -O,--request-option=OPT Request DHCP option OPT from server" \
USE_FEATURE_UDHCP_PORT( \
- "\n -P,--client-port N Use port N instead of default 68" \
+ "\n -P,--client-port N Use port N instead of default 68" \
) \
USE_FEATURE_UDHCPC_ARPING( \
- "\n -a,--arping Use arping to validate offered address" \
+ "\n -a,--arping Use arping to validate offered address" \
) \
) \
SKIP_GETOPT_LONG( \
" -V CLASSID Vendor class identifier" \
- "\n -i INTERFACE Interface to use (default: eth0)" \
- "\n -H,-h HOSTNAME Client hostname" \
- "\n -c CLIENTID Client identifier" \
- "\n -C Suppress default client identifier" \
- "\n -p file Create pidfile" \
- "\n -r IP IP address to request" \
- "\n -s file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \
- "\n -t N Send up to N request packets" \
- "\n -T N Try to get a lease for N seconds (default 3)" \
- "\n -A N Wait N seconds (default 20) after failure" \
- "\n -f Run in foreground" \
- "\n -b Background if lease is not immediately obtained" \
- "\n -S Log to syslog too" \
- "\n -n Exit with failure if lease is not immediately obtained" \
- "\n -q Quit after obtaining lease" \
- "\n -R Release IP on quit" \
- "\n -O OPT Request DHCP option OPT from server" \
+ "\n -i INTERFACE Interface to use (default: eth0)" \
+ "\n -H,-h HOSTNAME Client hostname" \
+ "\n -c CLIENTID Client identifier" \
+ "\n -C Suppress default client identifier" \
+ "\n -p file Create pidfile" \
+ "\n -r IP IP address to request" \
+ "\n -s file Run file at dhcp events (default /usr/share/udhcpc/default.script)" \
+ "\n -t N Send up to N request packets" \
+ "\n -T N Try to get a lease for N seconds (default 3)" \
+ "\n -A N Wait N seconds (default 20) after failure" \
+ "\n -f Run in foreground" \
+ "\n -b Background if lease is not immediately obtained" \
+ "\n -S Log to syslog too" \
+ "\n -n Exit with failure if lease is not immediately obtained" \
+ "\n -q Quit after obtaining lease" \
+ "\n -R Release IP on quit" \
+ "\n -O OPT Request DHCP option OPT from server" \
USE_FEATURE_UDHCP_PORT( \
- "\n -P N Use port N instead of default 68" \
+ "\n -P N Use port N instead of default 68" \
) \
USE_FEATURE_UDHCPC_ARPING( \
- "\n -a Use arping to validate offered address" \
+ "\n -a Use arping to validate offered address" \
) \
)
@@ -4083,42 +4137,47 @@
"[-fS]" USE_FEATURE_UDHCP_PORT(" [-P N]") " [configfile]" \
#define udhcpd_full_usage \
- "DHCP server" \
- "\n -f Run in foreground" \
- "\n -S Log to syslog too" \
+ "DHCP server\n" \
+ "\n -f Run in foreground" \
+ "\n -S Log to syslog too" \
USE_FEATURE_UDHCP_PORT( \
- "\n -P N Use port N instead of default 67" \
+ "\n -P N Use port N instead of default 67" \
)
#define umount_trivial_usage \
"[flags] FILESYSTEM|DIRECTORY"
#define umount_full_usage \
- "Unmount file systems" \
- "\n\nOptions:" \
+ "Unmount file systems\n" \
+ "\nOptions:" \
USE_FEATURE_UMOUNT_ALL( \
- "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab")) \
+ "\n -a Unmount all file systems" USE_FEATURE_MTAB_SUPPORT(" in /etc/mtab") \
+ ) \
USE_FEATURE_MTAB_SUPPORT( \
- "\n -n Don't erase /etc/mtab entries") \
- "\n -r Try to remount devices as read-only if mount is busy" \
- "\n -l Lazy umount (detach filesystem)" \
- "\n -f Force umount (i.e., unreachable NFS server)" \
+ "\n -n Don't erase /etc/mtab entries" \
+ ) \
+ "\n -r Try to remount devices as read-only if mount is busy" \
+ "\n -l Lazy umount (detach filesystem)" \
+ "\n -f Force umount (i.e., unreachable NFS server)" \
USE_FEATURE_MOUNT_LOOP( \
- "\n -d Free loop device if it has been used")
+ "\n -d Free loop device if it has been used" \
+ )
+
#define umount_example_usage \
"$ umount /dev/hdc1\n"
#define uname_trivial_usage \
"[-amnrspv]"
#define uname_full_usage \
- "Print system information." \
- "\n\nOptions:\n" \
- " -a Print all\n" \
- " -m The machine (hardware) type\n" \
- " -n Hostname\n" \
- " -r OS release\n" \
- " -s OS name (default)\n" \
- " -p Processor type\n" \
- " -v OS version"
+ "Print system information.\n" \
+ "\nOptions:" \
+ "\n -a Print all" \
+ "\n -m The machine (hardware) type" \
+ "\n -n Hostname" \
+ "\n -r OS release" \
+ "\n -s OS name (default)" \
+ "\n -p Processor type" \
+ "\n -v OS version" \
+
#define uname_example_usage \
"$ uname -a\n" \
"Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n"
@@ -4126,38 +4185,39 @@
#define uncompress_trivial_usage \
"[-c] [-f] [name...]"
#define uncompress_full_usage \
- "Uncompress .Z file[s]" \
- "\n\nOptions:\n" \
- " -c Extract to stdout\n" \
- " -f Overwrite an existing file"
+ "Uncompress .Z file[s]\n" \
+ "\nOptions:" \
+ "\n -c Extract to stdout" \
+ "\n -f Overwrite an existing file" \
#define unexpand_trivial_usage \
"[-f][-a][-t NUM] [FILE|-]"
#define unexpand_full_usage \
- "Convert spaces to tabs, writing to standard output." \
- "\n\nOptions:" \
+ "Convert spaces to tabs, writing to standard output.\n" \
+ "\nOptions:" \
USE_FEATURE_UNEXPAND_LONG_OPTIONS( \
- "\n -a,--all Convert all blanks" \
- "\n -f,--first-only Convert only leading blanks" \
- "\n -t,--tabs=N Tabstops every N chars" \
+ "\n -a,--all Convert all blanks" \
+ "\n -f,--first-only Convert only leading blanks" \
+ "\n -t,--tabs=N Tabstops every N chars" \
) \
SKIP_FEATURE_UNEXPAND_LONG_OPTIONS( \
- "\n -a Convert all blanks" \
- "\n -f Convert only leading blanks" \
- "\n -t N Tabstops every N chars" \
+ "\n -a Convert all blanks" \
+ "\n -f Convert only leading blanks" \
+ "\n -t N Tabstops every N chars" \
)
#define uniq_trivial_usage \
"[-fscdu]... [INPUT [OUTPUT]]"
#define uniq_full_usage \
"Discard all but one of successive identical lines from INPUT\n" \
- "(or standard input), writing to OUTPUT (or standard output)" \
- "\n\nOptions:\n" \
- " -c Prefix lines by the number of occurrences\n" \
- " -d Only print duplicate lines\n" \
- " -u Only print unique lines\n" \
- " -f N Skip the first N fields\n" \
- " -s N Skip the first N chars (after any skipped fields)"
+ "(or standard input), writing to OUTPUT (or standard output)\n" \
+ "\nOptions:" \
+ "\n -c Prefix lines by the number of occurrences" \
+ "\n -d Only print duplicate lines" \
+ "\n -u Only print unique lines" \
+ "\n -f N Skip the first N fields" \
+ "\n -s N Skip the first N chars (after any skipped fields)" \
+
#define uniq_example_usage \
"$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \
"a\n" \
@@ -4171,25 +4231,26 @@
"When no file is given, use stdin/stdout.\n" \
"\nOptions:" \
"\n -u dos2unix" \
- "\n -d unix2dos"
+ "\n -d unix2dos" \
#define unzip_trivial_usage \
"[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]"
#define unzip_full_usage \
- "Extract files from ZIP archives" \
- "\n\nOptions:\n" \
- " -l List archive contents (with -q for short form)\n" \
- " -n Never overwrite existing files (default)\n" \
- " -o Overwrite files without prompting\n" \
- " -p Send output to stdout\n" \
- " -q Quiet\n" \
- " -x Exclude these files\n" \
- " -d Extract files into this directory"
+ "Extract files from ZIP archives\n" \
+ "\nOptions:" \
+ "\n -l List archive contents (with -q for short form)" \
+ "\n -n Never overwrite existing files (default)" \
+ "\n -o Overwrite files without prompting" \
+ "\n -p Send output to stdout" \
+ "\n -q Quiet" \
+ "\n -x Exclude these files" \
+ "\n -d Extract files into this directory" \
#define uptime_trivial_usage \
""
#define uptime_full_usage \
"Display the time since the last boot"
+
#define uptime_example_usage \
"$ uptime\n" \
" 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n"
@@ -4198,6 +4259,7 @@
"N"
#define usleep_full_usage \
"Pause for N microseconds"
+
#define usleep_example_usage \
"$ usleep 1000000\n" \
"[pauses for 1 second]\n"
@@ -4206,7 +4268,8 @@
"[-o outfile] [infile]"
#define uudecode_full_usage \
"Uudecode a file\n" \
- "NB: finds outfile name in uuencoded source unless -o is given"
+ "Finds outfile name in uuencoded source unless -o is given"
+
#define uudecode_example_usage \
"$ uudecode -o busybox busybox.uu\n" \
"$ ls -l busybox\n" \
@@ -4215,9 +4278,10 @@
#define uuencode_trivial_usage \
"[-m] [infile] stored_filename"
#define uuencode_full_usage \
- "Uuencode a file to stdout" \
- "\n\nOptions:\n" \
- " -m Use base64 encoding per RFC1521"
+ "Uuencode a file to stdout\n" \
+ "\nOptions:" \
+ "\n -m Use base64 encoding per RFC1521" \
+
#define uuencode_example_usage \
"$ uuencode busybox busybox\n" \
"begin 755 busybox\n" \
@@ -4228,40 +4292,41 @@
#define vconfig_trivial_usage \
"COMMAND [OPTIONS]..."
#define vconfig_full_usage \
- "Create and remove virtual ethernet devices" \
- "\n\nOptions:\n" \
- " add [interface-name] [vlan_id]\n" \
- " rem [vlan-name]\n" \
- " set_flag [interface-name] [flag-num] [0 | 1]\n" \
- " set_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
- " set_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \
- " set_name_type [name-type]"
+ "Create and remove virtual ethernet devices\n" \
+ "\nOptions:" \
+ "\n add [interface-name] [vlan_id]" \
+ "\n rem [vlan-name]" \
+ "\n set_flag [interface-name] [flag-num] [0 | 1]" \
+ "\n set_egress_map [vlan-name] [skb_priority] [vlan_qos]" \
+ "\n set_ingress_map [vlan-name] [skb_priority] [vlan_qos]" \
+ "\n set_name_type [name-type]" \
#define vi_trivial_usage \
"[OPTION] [FILE]..."
#define vi_full_usage \
- "Edit FILE" \
- "\n\nOptions:\n" \
+ "Edit FILE\n" \
+ "\nOptions:" \
USE_FEATURE_VI_COLON( \
- " -c Initial command to run ($EXINIT also available)\n") \
+ "\n -c Initial command to run ($EXINIT also available)") \
USE_FEATURE_VI_READONLY( \
- " -R Read-only - do not write to the file\n") \
- " -H Short help regarding available features"
+ "\n -R Read-only - do not write to the file") \
+ "\n -H Short help regarding available features" \
#define vlock_trivial_usage \
"[OPTIONS]"
#define vlock_full_usage \
- "Lock a virtual terminal. A password is required to unlock." \
- "\n\nOptions:\n" \
- " -a Lock all VTs"
+ "Lock a virtual terminal. A password is required to unlock.\n" \
+ "\nOptions:" \
+ "\n -a Lock all VTs" \
#define watch_trivial_usage \
"[-n seconds] [-t] COMMAND..."
#define watch_full_usage \
- "Execute a program periodically" \
- "\n\nOptions:\n" \
- " -n Loop period in seconds (default 2)\n" \
- " -t Don't print header"
+ "Execute a program periodically\n" \
+ "\nOptions:" \
+ "\n -n Loop period in seconds (default 2)" \
+ "\n -t Don't print header" \
+
#define watch_example_usage \
"$ watch date\n" \
"Mon Dec 17 10:31:40 GMT 2000\n" \
@@ -4271,23 +4336,24 @@
#define watchdog_trivial_usage \
"[-t N[ms]] [-F] DEV"
#define watchdog_full_usage \
- "Periodically write to watchdog device DEV" \
- "\n\nOptions:" \
+ "Periodically write to watchdog device DEV\n" \
+ "\nOptions:" \
"\n -t N Timer period (default 30)" \
"\n -F Run in foreground" \
"\n" \
- "\nUse -t 500ms to specify period in milliseconds"
+ "\nUse -t 500ms to specify period in milliseconds" \
#define wc_trivial_usage \
"[OPTION]... [FILE]..."
#define wc_full_usage \
"Print line, word, and byte counts for each FILE, and a total line if\n" \
- "more than one FILE is specified. With no FILE, read standard input." \
- "\n\nOptions:\n" \
- " -c Print the byte counts\n" \
- " -l Print the newline counts\n" \
- " -L Print the length of the longest line\n" \
- " -w Print the word counts"
+ "more than one FILE is specified. With no FILE, read standard input.\n" \
+ "\nOptions:" \
+ "\n -c Print the byte counts" \
+ "\n -l Print the newline counts" \
+ "\n -L Print the length of the longest line" \
+ "\n -w Print the word counts" \
+
#define wc_example_usage \
"$ wc /etc/passwd\n" \
" 31 46 1365 /etc/passwd\n"
@@ -4302,15 +4368,15 @@
"[-csq] [-O file] [-Y on/off] [-P DIR] [-U agent] url" \
)
#define wget_full_usage \
- "Retrieve files via HTTP or FTP" \
- "\n\nOptions:\n" \
- " -s Spider mode - only check file existence\n" \
- " -c Continue retrieval of aborted transfer\n" \
- " -q Quiet\n" \
- " -P Set directory prefix to DIR\n" \
- " -O Save to filename ('-' for stdout)\n" \
- " -U Adjust 'User-Agent' field\n" \
- " -Y Use proxy ('on' or 'off')"
+ "Retrieve files via HTTP or FTP\n" \
+ "\nOptions:" \
+ "\n -s Spider mode - only check file existence" \
+ "\n -c Continue retrieval of aborted transfer" \
+ "\n -q Quiet" \
+ "\n -P Set directory prefix to DIR" \
+ "\n -O Save to filename ('-' for stdout)" \
+ "\n -U Adjust 'User-Agent' field" \
+ "\n -Y Use proxy ('on' or 'off')" \
#define which_trivial_usage \
"[COMMAND...]"
@@ -4323,9 +4389,9 @@
#define who_trivial_usage \
"[-a]"
#define who_full_usage \
- "Show who is logged on" \
- "\n\nOptions:\n" \
- " -a show all"
+ "Show who is logged on\n" \
+ "\nOptions:" \
+ "\n -a show all" \
#define whoami_trivial_usage \
""
@@ -4335,16 +4401,17 @@
#define xargs_trivial_usage \
"[OPTIONS] [COMMAND] [ARGS...]"
#define xargs_full_usage \
- "Execute COMMAND on every item given by standard input" \
- "\n\nOptions:\n" \
+ "Execute COMMAND on every item given by standard input\n" \
+ "\nOptions:" \
USE_FEATURE_XARGS_SUPPORT_CONFIRMATION( \
- " -p Prompt the user about whether to run each command\n") \
- " -r Do not run command for empty read lines\n" \
+ "\n -p Prompt the user about whether to run each command") \
+ "\n -r Do not run command for empty read lines" \
USE_FEATURE_XARGS_SUPPORT_TERMOPT( \
- " -x Exit if the size is exceeded\n") \
+ "\n -x Exit if the size is exceeded") \
USE_FEATURE_XARGS_SUPPORT_ZERO_TERM( \
- " -0 Input filenames are terminated by a null character\n") \
- " -t Print the command line on stderr before executing it"
+ "\n -0 Input filenames are terminated by a null character") \
+ "\n -t Print the command line on stderr before executing it" \
+
#define xargs_example_usage \
"$ ls | xargs gzip\n" \
"$ find . -name '*.c' -print | xargs rm\n"
@@ -4362,11 +4429,11 @@
#define zcip_trivial_usage \
"[OPTIONS] ifname script"
#define zcip_full_usage \
- "Manage a ZeroConf IPv4 link-local address" \
- "\n\nOptions:\n" \
- " -f Run in foreground\n" \
- " -q Quit after address (no daemon)\n" \
- " -r 169.254.x.x Request this address first\n" \
- " -v Verbose"
+ "Manage a ZeroConf IPv4 link-local address\n" \
+ "\nOptions:" \
+ "\n -f Run in foreground" \
+ "\n -q Quit after address (no daemon)" \
+ "\n -r 169.254.x.x Request this address first" \
+ "\n -v Verbose" \
#endif /* __BB_USAGE_H__ */