| /* vi: set sw=4 ts=4: */ |
| /* |
| * Utility routines. |
| * |
| * Copyright (C) 2010 Denys Vlasenko |
| * |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. |
| */ |
| |
| #include "libbb.h" |
| |
| /* gcc 4.2.1 optimizes rotr64 better with inline than with macro |
| * (for rotX32, there is no difference). Why? My guess is that |
| * macro requires clever common subexpression elimination heuristics |
| * in gcc, while inline basically forces it to happen. |
| */ |
| //#define rotl32(x,n) (((x) << (n)) | ((x) >> (32 - (n)))) |
| static ALWAYS_INLINE uint32_t rotl32(uint32_t x, unsigned n) |
| { |
| return (x << n) | (x >> (32 - n)); |
| } |
| //#define rotr32(x,n) (((x) >> (n)) | ((x) << (32 - (n)))) |
| static ALWAYS_INLINE uint32_t rotr32(uint32_t x, unsigned n) |
| { |
| return (x >> n) | (x << (32 - n)); |
| } |
| /* rotr64 in needed for sha512 only: */ |
| //#define rotr64(x,n) (((x) >> (n)) | ((x) << (64 - (n)))) |
| static ALWAYS_INLINE uint64_t rotr64(uint64_t x, unsigned n) |
| { |
| return (x >> n) | (x << (64 - n)); |
| } |
| |
| |
| /* Feed data through a temporary buffer. |
| * The internal buffer remembers previous data until it has 64 |
| * bytes worth to pass on. |
| */ |
| static void FAST_FUNC common64_hash(md5_ctx_t *ctx, const void *buffer, size_t len) |
| { |
| unsigned bufpos = ctx->total64 & 63; |
| |
| ctx->total64 += len; |
| |
| while (1) { |
| unsigned remaining = 64 - bufpos; |
| if (remaining > len) |
| remaining = len; |
| /* Copy data into aligned buffer */ |
| memcpy(ctx->wbuffer + bufpos, buffer, remaining); |
| len -= remaining; |
| buffer = (const char *)buffer + remaining; |
| bufpos += remaining; |
| /* clever way to do "if (bufpos != 64) break; ... ; bufpos = 0;" */ |
| bufpos -= 64; |
| if (bufpos != 0) |
| break; |
| /* Buffer is filled up, process it */ |
| ctx->process_block(ctx); |
| /*bufpos = 0; - already is */ |
| } |
| } |
| |
| /* Process the remaining bytes in the buffer */ |
| static void FAST_FUNC common64_end(md5_ctx_t *ctx, int swap_needed) |
| { |
| unsigned bufpos = ctx->total64 & 63; |
| /* Pad the buffer to the next 64-byte boundary with 0x80,0,0,0... */ |
| ctx->wbuffer[bufpos++] = 0x80; |
| |
| /* This loop iterates either once or twice, no more, no less */ |
| while (1) { |
| unsigned remaining = 64 - bufpos; |
| memset(ctx->wbuffer + bufpos, 0, remaining); |
| /* Do we have enough space for the length count? */ |
| if (remaining >= 8) { |
| /* Store the 64-bit counter of bits in the buffer */ |
| uint64_t t = ctx->total64 << 3; |
| if (swap_needed) |
| t = bb_bswap_64(t); |
| /* wbuffer is suitably aligned for this */ |
| *(uint64_t *) (&ctx->wbuffer[64 - 8]) = t; |
| } |
| ctx->process_block(ctx); |
| if (remaining >= 8) |
| break; |
| bufpos = 0; |
| } |
| } |
| |
| |
| /* |
| * Compute MD5 checksum of strings according to the |
| * definition of MD5 in RFC 1321 from April 1992. |
| * |
| * Written by Ulrich Drepper <drepper@gnu.ai.mit.edu>, 1995. |
| * |
| * Copyright (C) 1995-1999 Free Software Foundation, Inc. |
| * Copyright (C) 2001 Manuel Novoa III |
| * Copyright (C) 2003 Glenn L. McGrath |
| * Copyright (C) 2003 Erik Andersen |
| * |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. |
| */ |
| |
| /* 0: fastest, 3: smallest */ |
| #if CONFIG_MD5_SIZE_VS_SPEED < 0 |
| # define MD5_SIZE_VS_SPEED 0 |
| #elif CONFIG_MD5_SIZE_VS_SPEED > 3 |
| # define MD5_SIZE_VS_SPEED 3 |
| #else |
| # define MD5_SIZE_VS_SPEED CONFIG_MD5_SIZE_VS_SPEED |
| #endif |
| |
| /* These are the four functions used in the four steps of the MD5 algorithm |
| * and defined in the RFC 1321. The first function is a little bit optimized |
| * (as found in Colin Plumbs public domain implementation). |
| * #define FF(b, c, d) ((b & c) | (~b & d)) |
| */ |
| #undef FF |
| #undef FG |
| #undef FH |
| #undef FI |
| #define FF(b, c, d) (d ^ (b & (c ^ d))) |
| #define FG(b, c, d) FF(d, b, c) |
| #define FH(b, c, d) (b ^ c ^ d) |
| #define FI(b, c, d) (c ^ (b | ~d)) |
| |
| /* Hash a single block, 64 bytes long and 4-byte aligned */ |
| static void FAST_FUNC md5_process_block64(md5_ctx_t *ctx) |
| { |
| #if MD5_SIZE_VS_SPEED > 0 |
| /* Before we start, one word to the strange constants. |
| They are defined in RFC 1321 as |
| T[i] = (int)(4294967296.0 * fabs(sin(i))), i=1..64 |
| */ |
| static const uint32_t C_array[] = { |
| /* round 1 */ |
| 0xd76aa478, 0xe8c7b756, 0x242070db, 0xc1bdceee, |
| 0xf57c0faf, 0x4787c62a, 0xa8304613, 0xfd469501, |
| 0x698098d8, 0x8b44f7af, 0xffff5bb1, 0x895cd7be, |
| 0x6b901122, 0xfd987193, 0xa679438e, 0x49b40821, |
| /* round 2 */ |
| 0xf61e2562, 0xc040b340, 0x265e5a51, 0xe9b6c7aa, |
| 0xd62f105d, 0x02441453, 0xd8a1e681, 0xe7d3fbc8, |
| 0x21e1cde6, 0xc33707d6, 0xf4d50d87, 0x455a14ed, |
| 0xa9e3e905, 0xfcefa3f8, 0x676f02d9, 0x8d2a4c8a, |
| /* round 3 */ |
| 0xfffa3942, 0x8771f681, 0x6d9d6122, 0xfde5380c, |
| 0xa4beea44, 0x4bdecfa9, 0xf6bb4b60, 0xbebfbc70, |
| 0x289b7ec6, 0xeaa127fa, 0xd4ef3085, 0x4881d05, |
| 0xd9d4d039, 0xe6db99e5, 0x1fa27cf8, 0xc4ac5665, |
| /* round 4 */ |
| 0xf4292244, 0x432aff97, 0xab9423a7, 0xfc93a039, |
| 0x655b59c3, 0x8f0ccc92, 0xffeff47d, 0x85845dd1, |
| 0x6fa87e4f, 0xfe2ce6e0, 0xa3014314, 0x4e0811a1, |
| 0xf7537e82, 0xbd3af235, 0x2ad7d2bb, 0xeb86d391 |
| }; |
| static const char P_array[] ALIGN1 = { |
| # if MD5_SIZE_VS_SPEED > 1 |
| 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, /* 1 */ |
| # endif |
| 1, 6, 11, 0, 5, 10, 15, 4, 9, 14, 3, 8, 13, 2, 7, 12, /* 2 */ |
| 5, 8, 11, 14, 1, 4, 7, 10, 13, 0, 3, 6, 9, 12, 15, 2, /* 3 */ |
| 0, 7, 14, 5, 12, 3, 10, 1, 8, 15, 6, 13, 4, 11, 2, 9 /* 4 */ |
| }; |
| #endif |
| uint32_t *words = (void*) ctx->wbuffer; |
| uint32_t A = ctx->hash[0]; |
| uint32_t B = ctx->hash[1]; |
| uint32_t C = ctx->hash[2]; |
| uint32_t D = ctx->hash[3]; |
| |
| #if MD5_SIZE_VS_SPEED >= 2 /* 2 or 3 */ |
| |
| static const char S_array[] ALIGN1 = { |
| 7, 12, 17, 22, |
| 5, 9, 14, 20, |
| 4, 11, 16, 23, |
| 6, 10, 15, 21 |
| }; |
| const uint32_t *pc; |
| const char *pp; |
| const char *ps; |
| int i; |
| uint32_t temp; |
| |
| # if BB_BIG_ENDIAN |
| for (i = 0; i < 16; i++) |
| words[i] = SWAP_LE32(words[i]); |
| # endif |
| |
| # if MD5_SIZE_VS_SPEED == 3 |
| pc = C_array; |
| pp = P_array; |
| ps = S_array - 4; |
| |
| for (i = 0; i < 64; i++) { |
| if ((i & 0x0f) == 0) |
| ps += 4; |
| temp = A; |
| switch (i >> 4) { |
| case 0: |
| temp += FF(B, C, D); |
| break; |
| case 1: |
| temp += FG(B, C, D); |
| break; |
| case 2: |
| temp += FH(B, C, D); |
| break; |
| case 3: |
| temp += FI(B, C, D); |
| } |
| temp += words[(int) (*pp++)] + *pc++; |
| temp = rotl32(temp, ps[i & 3]); |
| temp += B; |
| A = D; |
| D = C; |
| C = B; |
| B = temp; |
| } |
| # else /* MD5_SIZE_VS_SPEED == 2 */ |
| pc = C_array; |
| pp = P_array; |
| ps = S_array; |
| |
| for (i = 0; i < 16; i++) { |
| temp = A + FF(B, C, D) + words[(int) (*pp++)] + *pc++; |
| temp = rotl32(temp, ps[i & 3]); |
| temp += B; |
| A = D; |
| D = C; |
| C = B; |
| B = temp; |
| } |
| ps += 4; |
| for (i = 0; i < 16; i++) { |
| temp = A + FG(B, C, D) + words[(int) (*pp++)] + *pc++; |
| temp = rotl32(temp, ps[i & 3]); |
| temp += B; |
| A = D; |
| D = C; |
| C = B; |
| B = temp; |
| } |
| ps += 4; |
| for (i = 0; i < 16; i++) { |
| temp = A + FH(B, C, D) + words[(int) (*pp++)] + *pc++; |
| temp = rotl32(temp, ps[i & 3]); |
| temp += B; |
| A = D; |
| D = C; |
| C = B; |
| B = temp; |
| } |
| ps += 4; |
| for (i = 0; i < 16; i++) { |
| temp = A + FI(B, C, D) + words[(int) (*pp++)] + *pc++; |
| temp = rotl32(temp, ps[i & 3]); |
| temp += B; |
| A = D; |
| D = C; |
| C = B; |
| B = temp; |
| } |
| # endif |
| /* Add checksum to the starting values */ |
| ctx->hash[0] += A; |
| ctx->hash[1] += B; |
| ctx->hash[2] += C; |
| ctx->hash[3] += D; |
| |
| #else /* MD5_SIZE_VS_SPEED == 0 or 1 */ |
| |
| uint32_t A_save = A; |
| uint32_t B_save = B; |
| uint32_t C_save = C; |
| uint32_t D_save = D; |
| # if MD5_SIZE_VS_SPEED == 1 |
| const uint32_t *pc; |
| const char *pp; |
| int i; |
| # endif |
| |
| /* First round: using the given function, the context and a constant |
| the next context is computed. Because the algorithm's processing |
| unit is a 32-bit word and it is determined to work on words in |
| little endian byte order we perhaps have to change the byte order |
| before the computation. To reduce the work for the next steps |
| we save swapped words in WORDS array. */ |
| # undef OP |
| # define OP(a, b, c, d, s, T) \ |
| do { \ |
| a += FF(b, c, d) + (*words IF_BIG_ENDIAN(= SWAP_LE32(*words))) + T; \ |
| words++; \ |
| a = rotl32(a, s); \ |
| a += b; \ |
| } while (0) |
| |
| /* Round 1 */ |
| # if MD5_SIZE_VS_SPEED == 1 |
| pc = C_array; |
| for (i = 0; i < 4; i++) { |
| OP(A, B, C, D, 7, *pc++); |
| OP(D, A, B, C, 12, *pc++); |
| OP(C, D, A, B, 17, *pc++); |
| OP(B, C, D, A, 22, *pc++); |
| } |
| # else |
| OP(A, B, C, D, 7, 0xd76aa478); |
| OP(D, A, B, C, 12, 0xe8c7b756); |
| OP(C, D, A, B, 17, 0x242070db); |
| OP(B, C, D, A, 22, 0xc1bdceee); |
| OP(A, B, C, D, 7, 0xf57c0faf); |
| OP(D, A, B, C, 12, 0x4787c62a); |
| OP(C, D, A, B, 17, 0xa8304613); |
| OP(B, C, D, A, 22, 0xfd469501); |
| OP(A, B, C, D, 7, 0x698098d8); |
| OP(D, A, B, C, 12, 0x8b44f7af); |
| OP(C, D, A, B, 17, 0xffff5bb1); |
| OP(B, C, D, A, 22, 0x895cd7be); |
| OP(A, B, C, D, 7, 0x6b901122); |
| OP(D, A, B, C, 12, 0xfd987193); |
| OP(C, D, A, B, 17, 0xa679438e); |
| OP(B, C, D, A, 22, 0x49b40821); |
| # endif |
| words -= 16; |
| |
| /* For the second to fourth round we have the possibly swapped words |
| in WORDS. Redefine the macro to take an additional first |
| argument specifying the function to use. */ |
| # undef OP |
| # define OP(f, a, b, c, d, k, s, T) \ |
| do { \ |
| a += f(b, c, d) + words[k] + T; \ |
| a = rotl32(a, s); \ |
| a += b; \ |
| } while (0) |
| |
| /* Round 2 */ |
| # if MD5_SIZE_VS_SPEED == 1 |
| pp = P_array; |
| for (i = 0; i < 4; i++) { |
| OP(FG, A, B, C, D, (int) (*pp++), 5, *pc++); |
| OP(FG, D, A, B, C, (int) (*pp++), 9, *pc++); |
| OP(FG, C, D, A, B, (int) (*pp++), 14, *pc++); |
| OP(FG, B, C, D, A, (int) (*pp++), 20, *pc++); |
| } |
| # else |
| OP(FG, A, B, C, D, 1, 5, 0xf61e2562); |
| OP(FG, D, A, B, C, 6, 9, 0xc040b340); |
| OP(FG, C, D, A, B, 11, 14, 0x265e5a51); |
| OP(FG, B, C, D, A, 0, 20, 0xe9b6c7aa); |
| OP(FG, A, B, C, D, 5, 5, 0xd62f105d); |
| OP(FG, D, A, B, C, 10, 9, 0x02441453); |
| OP(FG, C, D, A, B, 15, 14, 0xd8a1e681); |
| OP(FG, B, C, D, A, 4, 20, 0xe7d3fbc8); |
| OP(FG, A, B, C, D, 9, 5, 0x21e1cde6); |
| OP(FG, D, A, B, C, 14, 9, 0xc33707d6); |
| OP(FG, C, D, A, B, 3, 14, 0xf4d50d87); |
| OP(FG, B, C, D, A, 8, 20, 0x455a14ed); |
| OP(FG, A, B, C, D, 13, 5, 0xa9e3e905); |
| OP(FG, D, A, B, C, 2, 9, 0xfcefa3f8); |
| OP(FG, C, D, A, B, 7, 14, 0x676f02d9); |
| OP(FG, B, C, D, A, 12, 20, 0x8d2a4c8a); |
| # endif |
| |
| /* Round 3 */ |
| # if MD5_SIZE_VS_SPEED == 1 |
| for (i = 0; i < 4; i++) { |
| OP(FH, A, B, C, D, (int) (*pp++), 4, *pc++); |
| OP(FH, D, A, B, C, (int) (*pp++), 11, *pc++); |
| OP(FH, C, D, A, B, (int) (*pp++), 16, *pc++); |
| OP(FH, B, C, D, A, (int) (*pp++), 23, *pc++); |
| } |
| # else |
| OP(FH, A, B, C, D, 5, 4, 0xfffa3942); |
| OP(FH, D, A, B, C, 8, 11, 0x8771f681); |
| OP(FH, C, D, A, B, 11, 16, 0x6d9d6122); |
| OP(FH, B, C, D, A, 14, 23, 0xfde5380c); |
| OP(FH, A, B, C, D, 1, 4, 0xa4beea44); |
| OP(FH, D, A, B, C, 4, 11, 0x4bdecfa9); |
| OP(FH, C, D, A, B, 7, 16, 0xf6bb4b60); |
| OP(FH, B, C, D, A, 10, 23, 0xbebfbc70); |
| OP(FH, A, B, C, D, 13, 4, 0x289b7ec6); |
| OP(FH, D, A, B, C, 0, 11, 0xeaa127fa); |
| OP(FH, C, D, A, B, 3, 16, 0xd4ef3085); |
| OP(FH, B, C, D, A, 6, 23, 0x04881d05); |
| OP(FH, A, B, C, D, 9, 4, 0xd9d4d039); |
| OP(FH, D, A, B, C, 12, 11, 0xe6db99e5); |
| OP(FH, C, D, A, B, 15, 16, 0x1fa27cf8); |
| OP(FH, B, C, D, A, 2, 23, 0xc4ac5665); |
| # endif |
| |
| /* Round 4 */ |
| # if MD5_SIZE_VS_SPEED == 1 |
| for (i = 0; i < 4; i++) { |
| OP(FI, A, B, C, D, (int) (*pp++), 6, *pc++); |
| OP(FI, D, A, B, C, (int) (*pp++), 10, *pc++); |
| OP(FI, C, D, A, B, (int) (*pp++), 15, *pc++); |
| OP(FI, B, C, D, A, (int) (*pp++), 21, *pc++); |
| } |
| # else |
| OP(FI, A, B, C, D, 0, 6, 0xf4292244); |
| OP(FI, D, A, B, C, 7, 10, 0x432aff97); |
| OP(FI, C, D, A, B, 14, 15, 0xab9423a7); |
| OP(FI, B, C, D, A, 5, 21, 0xfc93a039); |
| OP(FI, A, B, C, D, 12, 6, 0x655b59c3); |
| OP(FI, D, A, B, C, 3, 10, 0x8f0ccc92); |
| OP(FI, C, D, A, B, 10, 15, 0xffeff47d); |
| OP(FI, B, C, D, A, 1, 21, 0x85845dd1); |
| OP(FI, A, B, C, D, 8, 6, 0x6fa87e4f); |
| OP(FI, D, A, B, C, 15, 10, 0xfe2ce6e0); |
| OP(FI, C, D, A, B, 6, 15, 0xa3014314); |
| OP(FI, B, C, D, A, 13, 21, 0x4e0811a1); |
| OP(FI, A, B, C, D, 4, 6, 0xf7537e82); |
| OP(FI, D, A, B, C, 11, 10, 0xbd3af235); |
| OP(FI, C, D, A, B, 2, 15, 0x2ad7d2bb); |
| OP(FI, B, C, D, A, 9, 21, 0xeb86d391); |
| # undef OP |
| # endif |
| /* Add checksum to the starting values */ |
| ctx->hash[0] = A_save + A; |
| ctx->hash[1] = B_save + B; |
| ctx->hash[2] = C_save + C; |
| ctx->hash[3] = D_save + D; |
| #endif |
| } |
| #undef FF |
| #undef FG |
| #undef FH |
| #undef FI |
| |
| /* Initialize structure containing state of computation. |
| * (RFC 1321, 3.3: Step 3) |
| */ |
| void FAST_FUNC md5_begin(md5_ctx_t *ctx) |
| { |
| ctx->hash[0] = 0x67452301; |
| ctx->hash[1] = 0xefcdab89; |
| ctx->hash[2] = 0x98badcfe; |
| ctx->hash[3] = 0x10325476; |
| ctx->total64 = 0; |
| ctx->process_block = md5_process_block64; |
| } |
| |
| /* Used also for sha1 and sha256 */ |
| void FAST_FUNC md5_hash(md5_ctx_t *ctx, const void *buffer, size_t len) |
| { |
| common64_hash(ctx, buffer, len); |
| } |
| |
| /* Process the remaining bytes in the buffer and put result from CTX |
| * in first 16 bytes following RESBUF. The result is always in little |
| * endian byte order, so that a byte-wise output yields to the wanted |
| * ASCII representation of the message digest. |
| */ |
| void FAST_FUNC md5_end(md5_ctx_t *ctx, void *resbuf) |
| { |
| /* MD5 stores total in LE, need to swap on BE arches: */ |
| common64_end(ctx, /*swap_needed:*/ BB_BIG_ENDIAN); |
| |
| /* The MD5 result is in little endian byte order */ |
| #if BB_BIG_ENDIAN |
| ctx->hash[0] = SWAP_LE32(ctx->hash[0]); |
| ctx->hash[1] = SWAP_LE32(ctx->hash[1]); |
| ctx->hash[2] = SWAP_LE32(ctx->hash[2]); |
| ctx->hash[3] = SWAP_LE32(ctx->hash[3]); |
| #endif |
| memcpy(resbuf, ctx->hash, sizeof(ctx->hash[0]) * 4); |
| } |
| |
| |
| /* |
| * SHA1 part is: |
| * Copyright 2007 Rob Landley <rob@landley.net> |
| * |
| * Based on the public domain SHA-1 in C by Steve Reid <steve@edmweb.com> |
| * from http://www.mirrors.wiretapped.net/security/cryptography/hashes/sha1/ |
| * |
| * Licensed under GPLv2, see file LICENSE in this source tree. |
| * |
| * --------------------------------------------------------------------------- |
| * |
| * SHA256 and SHA512 parts are: |
| * Released into the Public Domain by Ulrich Drepper <drepper@redhat.com>. |
| * Shrank by Denys Vlasenko. |
| * |
| * --------------------------------------------------------------------------- |
| * |
| * The best way to test random blocksizes is to go to coreutils/md5_sha1_sum.c |
| * and replace "4096" with something like "2000 + time(NULL) % 2097", |
| * then rebuild and compare "shaNNNsum bigfile" results. |
| */ |
| |
| static void FAST_FUNC sha1_process_block64(sha1_ctx_t *ctx) |
| { |
| static const uint32_t rconsts[] = { |
| 0x5A827999, 0x6ED9EBA1, 0x8F1BBCDC, 0xCA62C1D6 |
| }; |
| int i, j; |
| int cnt; |
| uint32_t W[16+16]; |
| uint32_t a, b, c, d, e; |
| |
| /* On-stack work buffer frees up one register in the main loop |
| * which otherwise will be needed to hold ctx pointer */ |
| for (i = 0; i < 16; i++) |
| W[i] = W[i+16] = SWAP_BE32(((uint32_t*)ctx->wbuffer)[i]); |
| |
| a = ctx->hash[0]; |
| b = ctx->hash[1]; |
| c = ctx->hash[2]; |
| d = ctx->hash[3]; |
| e = ctx->hash[4]; |
| |
| /* 4 rounds of 20 operations each */ |
| cnt = 0; |
| for (i = 0; i < 4; i++) { |
| j = 19; |
| do { |
| uint32_t work; |
| |
| work = c ^ d; |
| if (i == 0) { |
| work = (work & b) ^ d; |
| if (j <= 3) |
| goto ge16; |
| /* Used to do SWAP_BE32 here, but this |
| * requires ctx (see comment above) */ |
| work += W[cnt]; |
| } else { |
| if (i == 2) |
| work = ((b | c) & d) | (b & c); |
| else /* i = 1 or 3 */ |
| work ^= b; |
| ge16: |
| W[cnt] = W[cnt+16] = rotl32(W[cnt+13] ^ W[cnt+8] ^ W[cnt+2] ^ W[cnt], 1); |
| work += W[cnt]; |
| } |
| work += e + rotl32(a, 5) + rconsts[i]; |
| |
| /* Rotate by one for next time */ |
| e = d; |
| d = c; |
| c = /* b = */ rotl32(b, 30); |
| b = a; |
| a = work; |
| cnt = (cnt + 1) & 15; |
| } while (--j >= 0); |
| } |
| |
| ctx->hash[0] += a; |
| ctx->hash[1] += b; |
| ctx->hash[2] += c; |
| ctx->hash[3] += d; |
| ctx->hash[4] += e; |
| } |
| |
| /* Constants for SHA512 from FIPS 180-2:4.2.3. |
| * SHA256 constants from FIPS 180-2:4.2.2 |
| * are the most significant half of first 64 elements |
| * of the same array. |
| */ |
| static const uint64_t sha_K[80] = { |
| 0x428a2f98d728ae22ULL, 0x7137449123ef65cdULL, |
| 0xb5c0fbcfec4d3b2fULL, 0xe9b5dba58189dbbcULL, |
| 0x3956c25bf348b538ULL, 0x59f111f1b605d019ULL, |
| 0x923f82a4af194f9bULL, 0xab1c5ed5da6d8118ULL, |
| 0xd807aa98a3030242ULL, 0x12835b0145706fbeULL, |
| 0x243185be4ee4b28cULL, 0x550c7dc3d5ffb4e2ULL, |
| 0x72be5d74f27b896fULL, 0x80deb1fe3b1696b1ULL, |
| 0x9bdc06a725c71235ULL, 0xc19bf174cf692694ULL, |
| 0xe49b69c19ef14ad2ULL, 0xefbe4786384f25e3ULL, |
| 0x0fc19dc68b8cd5b5ULL, 0x240ca1cc77ac9c65ULL, |
| 0x2de92c6f592b0275ULL, 0x4a7484aa6ea6e483ULL, |
| 0x5cb0a9dcbd41fbd4ULL, 0x76f988da831153b5ULL, |
| 0x983e5152ee66dfabULL, 0xa831c66d2db43210ULL, |
| 0xb00327c898fb213fULL, 0xbf597fc7beef0ee4ULL, |
| 0xc6e00bf33da88fc2ULL, 0xd5a79147930aa725ULL, |
| 0x06ca6351e003826fULL, 0x142929670a0e6e70ULL, |
| 0x27b70a8546d22ffcULL, 0x2e1b21385c26c926ULL, |
| 0x4d2c6dfc5ac42aedULL, 0x53380d139d95b3dfULL, |
| 0x650a73548baf63deULL, 0x766a0abb3c77b2a8ULL, |
| 0x81c2c92e47edaee6ULL, 0x92722c851482353bULL, |
| 0xa2bfe8a14cf10364ULL, 0xa81a664bbc423001ULL, |
| 0xc24b8b70d0f89791ULL, 0xc76c51a30654be30ULL, |
| 0xd192e819d6ef5218ULL, 0xd69906245565a910ULL, |
| 0xf40e35855771202aULL, 0x106aa07032bbd1b8ULL, |
| 0x19a4c116b8d2d0c8ULL, 0x1e376c085141ab53ULL, |
| 0x2748774cdf8eeb99ULL, 0x34b0bcb5e19b48a8ULL, |
| 0x391c0cb3c5c95a63ULL, 0x4ed8aa4ae3418acbULL, |
| 0x5b9cca4f7763e373ULL, 0x682e6ff3d6b2b8a3ULL, |
| 0x748f82ee5defb2fcULL, 0x78a5636f43172f60ULL, |
| 0x84c87814a1f0ab72ULL, 0x8cc702081a6439ecULL, |
| 0x90befffa23631e28ULL, 0xa4506cebde82bde9ULL, |
| 0xbef9a3f7b2c67915ULL, 0xc67178f2e372532bULL, |
| 0xca273eceea26619cULL, 0xd186b8c721c0c207ULL, /* [64]+ are used for sha512 only */ |
| 0xeada7dd6cde0eb1eULL, 0xf57d4f7fee6ed178ULL, |
| 0x06f067aa72176fbaULL, 0x0a637dc5a2c898a6ULL, |
| 0x113f9804bef90daeULL, 0x1b710b35131c471bULL, |
| 0x28db77f523047d84ULL, 0x32caab7b40c72493ULL, |
| 0x3c9ebe0a15c9bebcULL, 0x431d67c49c100d4cULL, |
| 0x4cc5d4becb3e42b6ULL, 0x597f299cfc657e2aULL, |
| 0x5fcb6fab3ad6faecULL, 0x6c44198c4a475817ULL |
| }; |
| |
| #undef Ch |
| #undef Maj |
| #undef S0 |
| #undef S1 |
| #undef R0 |
| #undef R1 |
| |
| static void FAST_FUNC sha256_process_block64(sha256_ctx_t *ctx) |
| { |
| unsigned t; |
| uint32_t W[64], a, b, c, d, e, f, g, h; |
| const uint32_t *words = (uint32_t*) ctx->wbuffer; |
| |
| /* Operators defined in FIPS 180-2:4.1.2. */ |
| #define Ch(x, y, z) ((x & y) ^ (~x & z)) |
| #define Maj(x, y, z) ((x & y) ^ (x & z) ^ (y & z)) |
| #define S0(x) (rotr32(x, 2) ^ rotr32(x, 13) ^ rotr32(x, 22)) |
| #define S1(x) (rotr32(x, 6) ^ rotr32(x, 11) ^ rotr32(x, 25)) |
| #define R0(x) (rotr32(x, 7) ^ rotr32(x, 18) ^ (x >> 3)) |
| #define R1(x) (rotr32(x, 17) ^ rotr32(x, 19) ^ (x >> 10)) |
| |
| /* Compute the message schedule according to FIPS 180-2:6.2.2 step 2. */ |
| for (t = 0; t < 16; ++t) |
| W[t] = SWAP_BE32(words[t]); |
| for (/*t = 16*/; t < 64; ++t) |
| W[t] = R1(W[t - 2]) + W[t - 7] + R0(W[t - 15]) + W[t - 16]; |
| |
| a = ctx->hash[0]; |
| b = ctx->hash[1]; |
| c = ctx->hash[2]; |
| d = ctx->hash[3]; |
| e = ctx->hash[4]; |
| f = ctx->hash[5]; |
| g = ctx->hash[6]; |
| h = ctx->hash[7]; |
| |
| /* The actual computation according to FIPS 180-2:6.2.2 step 3. */ |
| for (t = 0; t < 64; ++t) { |
| /* Need to fetch upper half of sha_K[t] |
| * (I hope compiler is clever enough to just fetch |
| * upper half) |
| */ |
| uint32_t K_t = sha_K[t] >> 32; |
| uint32_t T1 = h + S1(e) + Ch(e, f, g) + K_t + W[t]; |
| uint32_t T2 = S0(a) + Maj(a, b, c); |
| h = g; |
| g = f; |
| f = e; |
| e = d + T1; |
| d = c; |
| c = b; |
| b = a; |
| a = T1 + T2; |
| } |
| #undef Ch |
| #undef Maj |
| #undef S0 |
| #undef S1 |
| #undef R0 |
| #undef R1 |
| /* Add the starting values of the context according to FIPS 180-2:6.2.2 |
| step 4. */ |
| ctx->hash[0] += a; |
| ctx->hash[1] += b; |
| ctx->hash[2] += c; |
| ctx->hash[3] += d; |
| ctx->hash[4] += e; |
| ctx->hash[5] += f; |
| ctx->hash[6] += g; |
| ctx->hash[7] += h; |
| } |
| |
| static void FAST_FUNC sha512_process_block128(sha512_ctx_t *ctx) |
| { |
| unsigned t; |
| uint64_t W[80]; |
| /* On i386, having assignments here (not later as sha256 does) |
| * produces 99 bytes smaller code with gcc 4.3.1 |
| */ |
| uint64_t a = ctx->hash[0]; |
| uint64_t b = ctx->hash[1]; |
| uint64_t c = ctx->hash[2]; |
| uint64_t d = ctx->hash[3]; |
| uint64_t e = ctx->hash[4]; |
| uint64_t f = ctx->hash[5]; |
| uint64_t g = ctx->hash[6]; |
| uint64_t h = ctx->hash[7]; |
| const uint64_t *words = (uint64_t*) ctx->wbuffer; |
| |
| /* Operators defined in FIPS 180-2:4.1.2. */ |
| #define Ch(x, y, z) ((x & y) ^ (~x & z)) |
| #define Maj(x, y, z) ((x & y) ^ (x & z) ^ (y & z)) |
| #define S0(x) (rotr64(x, 28) ^ rotr64(x, 34) ^ rotr64(x, 39)) |
| #define S1(x) (rotr64(x, 14) ^ rotr64(x, 18) ^ rotr64(x, 41)) |
| #define R0(x) (rotr64(x, 1) ^ rotr64(x, 8) ^ (x >> 7)) |
| #define R1(x) (rotr64(x, 19) ^ rotr64(x, 61) ^ (x >> 6)) |
| |
| /* Compute the message schedule according to FIPS 180-2:6.3.2 step 2. */ |
| for (t = 0; t < 16; ++t) |
| W[t] = SWAP_BE64(words[t]); |
| for (/*t = 16*/; t < 80; ++t) |
| W[t] = R1(W[t - 2]) + W[t - 7] + R0(W[t - 15]) + W[t - 16]; |
| |
| /* The actual computation according to FIPS 180-2:6.3.2 step 3. */ |
| for (t = 0; t < 80; ++t) { |
| uint64_t T1 = h + S1(e) + Ch(e, f, g) + sha_K[t] + W[t]; |
| uint64_t T2 = S0(a) + Maj(a, b, c); |
| h = g; |
| g = f; |
| f = e; |
| e = d + T1; |
| d = c; |
| c = b; |
| b = a; |
| a = T1 + T2; |
| } |
| #undef Ch |
| #undef Maj |
| #undef S0 |
| #undef S1 |
| #undef R0 |
| #undef R1 |
| /* Add the starting values of the context according to FIPS 180-2:6.3.2 |
| step 4. */ |
| ctx->hash[0] += a; |
| ctx->hash[1] += b; |
| ctx->hash[2] += c; |
| ctx->hash[3] += d; |
| ctx->hash[4] += e; |
| ctx->hash[5] += f; |
| ctx->hash[6] += g; |
| ctx->hash[7] += h; |
| } |
| |
| |
| void FAST_FUNC sha1_begin(sha1_ctx_t *ctx) |
| { |
| ctx->hash[0] = 0x67452301; |
| ctx->hash[1] = 0xefcdab89; |
| ctx->hash[2] = 0x98badcfe; |
| ctx->hash[3] = 0x10325476; |
| ctx->hash[4] = 0xc3d2e1f0; |
| ctx->total64 = 0; |
| ctx->process_block = sha1_process_block64; |
| } |
| |
| static const uint32_t init256[] = { |
| 0, |
| 0, |
| 0x6a09e667, |
| 0xbb67ae85, |
| 0x3c6ef372, |
| 0xa54ff53a, |
| 0x510e527f, |
| 0x9b05688c, |
| 0x1f83d9ab, |
| 0x5be0cd19, |
| }; |
| static const uint32_t init512_lo[] = { |
| 0, |
| 0, |
| 0xf3bcc908, |
| 0x84caa73b, |
| 0xfe94f82b, |
| 0x5f1d36f1, |
| 0xade682d1, |
| 0x2b3e6c1f, |
| 0xfb41bd6b, |
| 0x137e2179, |
| }; |
| |
| /* Initialize structure containing state of computation. |
| (FIPS 180-2:5.3.2) */ |
| void FAST_FUNC sha256_begin(sha256_ctx_t *ctx) |
| { |
| memcpy(&ctx->total64, init256, sizeof(init256)); |
| /*ctx->total64 = 0; - done by prepending two 32-bit zeros to init256 */ |
| ctx->process_block = sha256_process_block64; |
| } |
| |
| /* Initialize structure containing state of computation. |
| (FIPS 180-2:5.3.3) */ |
| void FAST_FUNC sha512_begin(sha512_ctx_t *ctx) |
| { |
| int i; |
| /* Two extra iterations zero out ctx->total64[2] */ |
| uint64_t *tp = ctx->total64; |
| for (i = 0; i < 2+8; i++) |
| tp[i] = ((uint64_t)(init256[i]) << 32) + init512_lo[i]; |
| /*ctx->total64[0] = ctx->total64[1] = 0; - already done */ |
| } |
| |
| void FAST_FUNC sha512_hash(sha512_ctx_t *ctx, const void *buffer, size_t len) |
| { |
| unsigned bufpos = ctx->total64[0] & 127; |
| unsigned remaining; |
| |
| /* First increment the byte count. FIPS 180-2 specifies the possible |
| length of the file up to 2^128 _bits_. |
| We compute the number of _bytes_ and convert to bits later. */ |
| ctx->total64[0] += len; |
| if (ctx->total64[0] < len) |
| ctx->total64[1]++; |
| #if 0 |
| remaining = 128 - bufpos; |
| |
| /* Hash whole blocks */ |
| while (len >= remaining) { |
| memcpy(ctx->wbuffer + bufpos, buffer, remaining); |
| buffer = (const char *)buffer + remaining; |
| len -= remaining; |
| remaining = 128; |
| bufpos = 0; |
| sha512_process_block128(ctx); |
| } |
| |
| /* Save last, partial blosk */ |
| memcpy(ctx->wbuffer + bufpos, buffer, len); |
| #else |
| while (1) { |
| remaining = 128 - bufpos; |
| if (remaining > len) |
| remaining = len; |
| /* Copy data into aligned buffer */ |
| memcpy(ctx->wbuffer + bufpos, buffer, remaining); |
| len -= remaining; |
| buffer = (const char *)buffer + remaining; |
| bufpos += remaining; |
| /* clever way to do "if (bufpos != 128) break; ... ; bufpos = 0;" */ |
| bufpos -= 128; |
| if (bufpos != 0) |
| break; |
| /* Buffer is filled up, process it */ |
| sha512_process_block128(ctx); |
| /*bufpos = 0; - already is */ |
| } |
| #endif |
| } |
| |
| /* Used also for sha256 */ |
| void FAST_FUNC sha1_end(sha1_ctx_t *ctx, void *resbuf) |
| { |
| unsigned hash_size; |
| |
| /* SHA stores total in BE, need to swap on LE arches: */ |
| common64_end(ctx, /*swap_needed:*/ BB_LITTLE_ENDIAN); |
| |
| hash_size = (ctx->process_block == sha1_process_block64) ? 5 : 8; |
| /* This way we do not impose alignment constraints on resbuf: */ |
| if (BB_LITTLE_ENDIAN) { |
| unsigned i; |
| for (i = 0; i < hash_size; ++i) |
| ctx->hash[i] = SWAP_BE32(ctx->hash[i]); |
| } |
| memcpy(resbuf, ctx->hash, sizeof(ctx->hash[0]) * hash_size); |
| } |
| |
| void FAST_FUNC sha512_end(sha512_ctx_t *ctx, void *resbuf) |
| { |
| unsigned bufpos = ctx->total64[0] & 127; |
| |
| /* Pad the buffer to the next 128-byte boundary with 0x80,0,0,0... */ |
| ctx->wbuffer[bufpos++] = 0x80; |
| |
| while (1) { |
| unsigned remaining = 128 - bufpos; |
| memset(ctx->wbuffer + bufpos, 0, remaining); |
| if (remaining >= 16) { |
| /* Store the 128-bit counter of bits in the buffer in BE format */ |
| uint64_t t; |
| t = ctx->total64[0] << 3; |
| t = SWAP_BE64(t); |
| *(uint64_t *) (&ctx->wbuffer[128 - 8]) = t; |
| t = (ctx->total64[1] << 3) | (ctx->total64[0] >> 61); |
| t = SWAP_BE64(t); |
| *(uint64_t *) (&ctx->wbuffer[128 - 16]) = t; |
| } |
| sha512_process_block128(ctx); |
| if (remaining >= 16) |
| break; |
| bufpos = 0; |
| } |
| |
| if (BB_LITTLE_ENDIAN) { |
| unsigned i; |
| for (i = 0; i < ARRAY_SIZE(ctx->hash); ++i) |
| ctx->hash[i] = SWAP_BE64(ctx->hash[i]); |
| } |
| memcpy(resbuf, ctx->hash, sizeof(ctx->hash)); |
| } |