diff --git a/networking/udhcp/Config.src b/networking/udhcp/Config.src
index 43f3676..af2fe18 100644
--- a/networking/udhcp/Config.src
+++ b/networking/udhcp/Config.src
@@ -10,105 +10,105 @@
 	default y
 	select PLATFORM_LINUX
 	help
-	  udhcpd is a DHCP server geared primarily toward embedded systems,
-	  while striving to be fully functional and RFC compliant.
+	udhcpd is a DHCP server geared primarily toward embedded systems,
+	while striving to be fully functional and RFC compliant.
 
 config FEATURE_UDHCPD_WRITE_LEASES_EARLY
 	bool "Rewrite the lease file at every new acknowledge"
 	default y
 	depends on UDHCPD
 	help
-	  If selected, udhcpd will write a new file with leases every
-	  time a new lease has been accepted, thus eliminating the need
-	  to send SIGUSR1 for the initial writing or updating. Any timed
-	  rewriting remains undisturbed.
+	If selected, udhcpd will write a new file with leases every
+	time a new lease has been accepted, thus eliminating the need
+	to send SIGUSR1 for the initial writing or updating. Any timed
+	rewriting remains undisturbed.
 
 config FEATURE_UDHCPD_BASE_IP_ON_MAC
 	bool "Select IP address based on client MAC"
 	default n
 	depends on UDHCPD
 	help
-	  If selected, udhcpd will base its selection of IP address to offer
-	  on the client's hardware address. Otherwise udhcpd uses the next
-	  consecutive free address.
+	If selected, udhcpd will base its selection of IP address to offer
+	on the client's hardware address. Otherwise udhcpd uses the next
+	consecutive free address.
 
-	  This reduces the frequency of IP address changes for clients
-	  which let their lease expire, and makes consecutive DHCPOFFERS
-	  for the same client to (almost always) contain the same
-	  IP address.
+	This reduces the frequency of IP address changes for clients
+	which let their lease expire, and makes consecutive DHCPOFFERS
+	for the same client to (almost always) contain the same
+	IP address.
 
 config DHCPD_LEASES_FILE
 	string "Absolute path to lease file"
 	default "/var/lib/misc/udhcpd.leases"
 	depends on UDHCPD
 	help
-	  udhcpd stores addresses in a lease file. This is the absolute path
-	  of the file. Normally it is safe to leave it untouched.
+	udhcpd stores addresses in a lease file. This is the absolute path
+	of the file. Normally it is safe to leave it untouched.
 
 config DUMPLEASES
 	bool "dumpleases (6.4 kb)"
 	default y
 	help
-	  dumpleases displays the leases written out by the udhcpd.
-	  Lease times are stored in the file by time remaining in lease, or
-	  by the absolute time that it expires in seconds from epoch.
+	dumpleases displays the leases written out by the udhcpd.
+	Lease times are stored in the file by time remaining in lease, or
+	by the absolute time that it expires in seconds from epoch.
 
 config DHCPRELAY
 	bool "dhcprelay (5.8 kb)"
 	default y
 	help
-	  dhcprelay listens for dhcp requests on one or more interfaces
-	  and forwards these requests to a different interface or dhcp
-	  server.
+	dhcprelay listens for dhcp requests on one or more interfaces
+	and forwards these requests to a different interface or dhcp
+	server.
 
 config UDHCPC
 	bool "udhcpc (DHCP client)"
 	default y
 	select PLATFORM_LINUX
 	help
-	  udhcpc is a DHCP client geared primarily toward embedded systems,
-	  while striving to be fully functional and RFC compliant.
+	udhcpc is a DHCP client geared primarily toward embedded systems,
+	while striving to be fully functional and RFC compliant.
 
-	  The udhcp client negotiates a lease with the DHCP server and
-	  runs a script when a lease is obtained or lost.
+	The udhcp client negotiates a lease with the DHCP server and
+	runs a script when a lease is obtained or lost.
 
 config FEATURE_UDHCPC_ARPING
 	bool "Verify that the offered address is free, using ARP ping"
 	default y
 	depends on UDHCPC
 	help
-	  If selected, udhcpc will send ARP probes and make sure
-	  the offered address is really not in use by anyone. The client
-	  will DHCPDECLINE the offer if the address is in use,
-	  and restart the discover process.
+	If selected, udhcpc will send ARP probes and make sure
+	the offered address is really not in use by anyone. The client
+	will DHCPDECLINE the offer if the address is in use,
+	and restart the discover process.
 
 config FEATURE_UDHCPC_SANITIZEOPT
 	bool "Do not pass malformed host and domain names"
 	default y
 	depends on UDHCPC
 	help
-	  If selected, udhcpc will check some options (such as option 12 -
-	  hostname) and if they don't look like valid hostnames
-	  (for example, if they start with dash or contain spaces),
-	  they will be replaced with string "bad" when exporting
-	  to the environment.
+	If selected, udhcpc will check some options (such as option 12 -
+	hostname) and if they don't look like valid hostnames
+	(for example, if they start with dash or contain spaces),
+	they will be replaced with string "bad" when exporting
+	to the environment.
 
 config UDHCPC_DEFAULT_SCRIPT
 	string "Absolute path to config script"
 	default "/usr/share/udhcpc/default.script"
 	depends on UDHCPC
 	help
-	  This script is called after udhcpc receives an answer. See
-	  examples/udhcp for a working example. Normally it is safe
-	  to leave this untouched.
+	This script is called after udhcpc receives an answer. See
+	examples/udhcp for a working example. Normally it is safe
+	to leave this untouched.
 
 config FEATURE_UDHCP_PORT
 	bool "Enable '-P port' option for udhcpd and udhcpc"
 	default n
 	depends on UDHCPD || UDHCPC
 	help
-	  At the cost of ~300 bytes, enables -P port option.
-	  This feature is typically not needed.
+	At the cost of ~300 bytes, enables -P port option.
+	This feature is typically not needed.
 
 config UDHCP_DEBUG
 	int "Maximum verbosity level for udhcp applets (0..9)"
@@ -116,28 +116,28 @@
 	range 0 9
 	depends on UDHCPD || UDHCPC || DHCPRELAY
 	help
-	  Verbosity can be increased with multiple -v options.
-	  This option controls how high it can be cranked up.
+	Verbosity can be increased with multiple -v options.
+	This option controls how high it can be cranked up.
 
-	  Bigger values result in bigger code. Levels above 1
-	  are very verbose and useful for debugging only.
+	Bigger values result in bigger code. Levels above 1
+	are very verbose and useful for debugging only.
 
 config FEATURE_UDHCP_RFC3397
 	bool "Support RFC3397 domain search (experimental)"
 	default y
 	depends on UDHCPD || UDHCPC
 	help
-	  If selected, both client and server will support passing of domain
-	  search lists via option 119, specified in RFC 3397,
-	  and SIP servers option 120, specified in RFC 3361.
+	If selected, both client and server will support passing of domain
+	search lists via option 119, specified in RFC 3397,
+	and SIP servers option 120, specified in RFC 3361.
 
 config FEATURE_UDHCP_8021Q
 	bool "Support 802.1Q VLAN parameters"
 	default y
 	depends on UDHCPD || UDHCPC
 	help
-	  If selected, both client and server will support passing of VLAN
-	  ID and priority via options 132 and 133 as per 802.1Q.
+	If selected, both client and server will support passing of VLAN
+	ID and priority via options 132 and 133 as per 802.1Q.
 
 config UDHCPC_SLACK_FOR_BUGGY_SERVERS
 	int "DHCP options slack buffer size"
@@ -145,19 +145,19 @@
 	range 0 924
 	depends on UDHCPD || UDHCPC
 	help
-	  Some buggy DHCP servers send DHCP offer packets with option
-	  field larger than we expect (which might also be considered a
-	  buffer overflow attempt). These packets are normally discarded.
-	  If circumstances beyond your control force you to support such
-	  servers, this may help. The upper limit (924) makes dhcpc accept
-	  even 1500 byte packets (maximum-sized ethernet packets).
+	Some buggy DHCP servers send DHCP offer packets with option
+	field larger than we expect (which might also be considered a
+	buffer overflow attempt). These packets are normally discarded.
+	If circumstances beyond your control force you to support such
+	servers, this may help. The upper limit (924) makes dhcpc accept
+	even 1500 byte packets (maximum-sized ethernet packets).
 
-	  This option does not make dhcp[cd] emit non-standard
-	  sized packets.
+	This option does not make dhcp[cd] emit non-standard
+	sized packets.
 
-	  Known buggy DHCP servers:
-	  3Com OfficeConnect Remote 812 ADSL Router:
-	    seems to confuse maximum allowed UDP packet size with
-	    maximum size of entire IP packet, and sends packets which are
-	    28 bytes too large.
-	  Seednet (ISP) VDSL: sends packets 2 bytes too large.
+	Known buggy DHCP servers:
+	3Com OfficeConnect Remote 812 ADSL Router:
+		seems to confuse maximum allowed UDP packet size with
+		maximum size of entire IP packet, and sends packets
+		which are 28 bytes too large.
+	Seednet (ISP) VDSL: sends packets 2 bytes too large.