rename archival/libunarchive -> archival/libarchive; move bz/ into it

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
diff --git a/archival/libarchive/decompress_uncompress.c b/archival/libarchive/decompress_uncompress.c
new file mode 100644
index 0000000..44d8942
--- /dev/null
+++ b/archival/libarchive/decompress_uncompress.c
@@ -0,0 +1,307 @@
+/* vi: set sw=4 ts=4: */
+/* uncompress for busybox -- (c) 2002 Robert Griebl
+ *
+ * based on the original compress42.c source
+ * (see disclaimer below)
+ */
+
+/* (N)compress42.c - File compression ala IEEE Computer, Mar 1992.
+ *
+ * Authors:
+ *   Spencer W. Thomas   (decvax!harpo!utah-cs!utah-gr!thomas)
+ *   Jim McKie           (decvax!mcvax!jim)
+ *   Steve Davies        (decvax!vax135!petsd!peora!srd)
+ *   Ken Turkowski       (decvax!decwrl!turtlevax!ken)
+ *   James A. Woods      (decvax!ihnp4!ames!jaw)
+ *   Joe Orost           (decvax!vax135!petsd!joe)
+ *   Dave Mack           (csu@alembic.acs.com)
+ *   Peter Jannesen, Network Communication Systems
+ *                       (peter@ncs.nl)
+ *
+ * marc@suse.de : a small security fix for a buffer overflow
+ *
+ * [... History snipped ...]
+ *
+ */
+
+#include "libbb.h"
+#include "archive.h"
+
+
+/* Default input buffer size */
+#define IBUFSIZ 2048
+
+/* Default output buffer size */
+#define OBUFSIZ 2048
+
+/* Defines for third byte of header */
+#define BIT_MASK        0x1f    /* Mask for 'number of compresssion bits'       */
+                                /* Masks 0x20 and 0x40 are free.                */
+                                /* I think 0x20 should mean that there is       */
+                                /* a fourth header byte (for expansion).        */
+#define BLOCK_MODE      0x80    /* Block compression if table is full and       */
+                                /* compression rate is dropping flush tables    */
+                                /* the next two codes should not be changed lightly, as they must not   */
+                                /* lie within the contiguous general code space.                        */
+#define FIRST   257     /* first free entry */
+#define CLEAR   256     /* table clear output code */
+
+#define INIT_BITS 9     /* initial number of bits/code */
+
+
+/* machine variants which require cc -Dmachine:  pdp11, z8000, DOS */
+#define HBITS      17   /* 50% occupancy */
+#define HSIZE      (1<<HBITS)
+#define HMASK      (HSIZE-1)    /* unused */
+#define HPRIME     9941         /* unused */
+#define BITS       16
+#define BITS_STR   "16"
+#undef  MAXSEG_64K              /* unused */
+#define MAXCODE(n) (1L << (n))
+
+#define htabof(i)               htab[i]
+#define codetabof(i)            codetab[i]
+#define tab_prefixof(i)         codetabof(i)
+#define tab_suffixof(i)         ((unsigned char *)(htab))[i]
+#define de_stack                ((unsigned char *)&(htab[HSIZE-1]))
+#define clear_tab_prefixof()    memset(codetab, 0, 256)
+
+/*
+ * Decompress stdin to stdout.  This routine adapts to the codes in the
+ * file building the "string" table on-the-fly; requiring no table to
+ * be stored in the compressed file.
+ */
+
+IF_DESKTOP(long long) int FAST_FUNC
+unpack_Z_stream(int fd_in, int fd_out)
+{
+	IF_DESKTOP(long long total_written = 0;)
+	IF_DESKTOP(long long) int retval = -1;
+	unsigned char *stackp;
+	long code;
+	int finchar;
+	long oldcode;
+	long incode;
+	int inbits;
+	int posbits;
+	int outpos;
+	int insize;
+	int bitmask;
+	long free_ent;
+	long maxcode;
+	long maxmaxcode;
+	int n_bits;
+	int rsize = 0;
+	unsigned char *inbuf; /* were eating insane amounts of stack - */
+	unsigned char *outbuf; /* bad for some embedded targets */
+	unsigned char *htab;
+	unsigned short *codetab;
+
+	/* Hmm, these were statics - why?! */
+	/* user settable max # bits/code */
+	int maxbits; /* = BITS; */
+	/* block compress mode -C compatible with 2.0 */
+	int block_mode; /* = BLOCK_MODE; */
+
+	inbuf = xzalloc(IBUFSIZ + 64);
+	outbuf = xzalloc(OBUFSIZ + 2048);
+	htab = xzalloc(HSIZE);  /* wsn't zeroed out before, maybe can xmalloc? */
+	codetab = xzalloc(HSIZE * sizeof(codetab[0]));
+
+	insize = 0;
+
+	/* xread isn't good here, we have to return - caller may want
+	 * to do some cleanup (e.g. delete incomplete unpacked file etc) */
+	if (full_read(fd_in, inbuf, 1) != 1) {
+		bb_error_msg("short read");
+		goto err;
+	}
+
+	maxbits = inbuf[0] & BIT_MASK;
+	block_mode = inbuf[0] & BLOCK_MODE;
+	maxmaxcode = MAXCODE(maxbits);
+
+	if (maxbits > BITS) {
+		bb_error_msg("compressed with %d bits, can only handle "
+				BITS_STR" bits", maxbits);
+		goto err;
+	}
+
+	n_bits = INIT_BITS;
+	maxcode = MAXCODE(INIT_BITS) - 1;
+	bitmask = (1 << INIT_BITS) - 1;
+	oldcode = -1;
+	finchar = 0;
+	outpos = 0;
+	posbits = 0 << 3;
+
+	free_ent = ((block_mode) ? FIRST : 256);
+
+	/* As above, initialize the first 256 entries in the table. */
+	/*clear_tab_prefixof(); - done by xzalloc */
+
+	for (code = 255; code >= 0; --code) {
+		tab_suffixof(code) = (unsigned char) code;
+	}
+
+	do {
+ resetbuf:
+		{
+			int i;
+			int e;
+			int o;
+
+			o = posbits >> 3;
+			e = insize - o;
+
+			for (i = 0; i < e; ++i)
+				inbuf[i] = inbuf[i + o];
+
+			insize = e;
+			posbits = 0;
+		}
+
+		if (insize < (int) (IBUFSIZ + 64) - IBUFSIZ) {
+			rsize = safe_read(fd_in, inbuf + insize, IBUFSIZ);
+//error check??
+			insize += rsize;
+		}
+
+		inbits = ((rsize > 0) ? (insize - insize % n_bits) << 3 :
+				  (insize << 3) - (n_bits - 1));
+
+		while (inbits > posbits) {
+			if (free_ent > maxcode) {
+				posbits =
+					((posbits - 1) +
+					 ((n_bits << 3) -
+					  (posbits - 1 + (n_bits << 3)) % (n_bits << 3)));
+				++n_bits;
+				if (n_bits == maxbits) {
+					maxcode = maxmaxcode;
+				} else {
+					maxcode = MAXCODE(n_bits) - 1;
+				}
+				bitmask = (1 << n_bits) - 1;
+				goto resetbuf;
+			}
+			{
+				unsigned char *p = &inbuf[posbits >> 3];
+
+				code = ((((long) (p[0])) | ((long) (p[1]) << 8) |
+				         ((long) (p[2]) << 16)) >> (posbits & 0x7)) & bitmask;
+			}
+			posbits += n_bits;
+
+
+			if (oldcode == -1) {
+				oldcode = code;
+				finchar = (int) oldcode;
+				outbuf[outpos++] = (unsigned char) finchar;
+				continue;
+			}
+
+			if (code == CLEAR && block_mode) {
+				clear_tab_prefixof();
+				free_ent = FIRST - 1;
+				posbits =
+					((posbits - 1) +
+					 ((n_bits << 3) -
+					  (posbits - 1 + (n_bits << 3)) % (n_bits << 3)));
+				n_bits = INIT_BITS;
+				maxcode = MAXCODE(INIT_BITS) - 1;
+				bitmask = (1 << INIT_BITS) - 1;
+				goto resetbuf;
+			}
+
+			incode = code;
+			stackp = de_stack;
+
+			/* Special case for KwKwK string. */
+			if (code >= free_ent) {
+				if (code > free_ent) {
+					unsigned char *p;
+
+					posbits -= n_bits;
+					p = &inbuf[posbits >> 3];
+
+					bb_error_msg
+						("insize:%d posbits:%d inbuf:%02X %02X %02X %02X %02X (%d)",
+						 insize, posbits, p[-1], p[0], p[1], p[2], p[3],
+						 (posbits & 07));
+					bb_error_msg("corrupted data");
+					goto err;
+				}
+
+				*--stackp = (unsigned char) finchar;
+				code = oldcode;
+			}
+
+			/* Generate output characters in reverse order */
+			while ((long) code >= (long) 256) {
+				*--stackp = tab_suffixof(code);
+				code = tab_prefixof(code);
+			}
+
+			finchar = tab_suffixof(code);
+			*--stackp = (unsigned char) finchar;
+
+			/* And put them out in forward order */
+			{
+				int i;
+
+				i = de_stack - stackp;
+				if (outpos + i >= OBUFSIZ) {
+					do {
+						if (i > OBUFSIZ - outpos) {
+							i = OBUFSIZ - outpos;
+						}
+
+						if (i > 0) {
+							memcpy(outbuf + outpos, stackp, i);
+							outpos += i;
+						}
+
+						if (outpos >= OBUFSIZ) {
+							full_write(fd_out, outbuf, outpos);
+//error check??
+							IF_DESKTOP(total_written += outpos;)
+							outpos = 0;
+						}
+						stackp += i;
+						i = de_stack - stackp;
+					} while (i > 0);
+				} else {
+					memcpy(outbuf + outpos, stackp, i);
+					outpos += i;
+				}
+			}
+
+			/* Generate the new entry. */
+			code = free_ent;
+			if (code < maxmaxcode) {
+				tab_prefixof(code) = (unsigned short) oldcode;
+				tab_suffixof(code) = (unsigned char) finchar;
+				free_ent = code + 1;
+			}
+
+			/* Remember previous code.  */
+			oldcode = incode;
+		}
+
+	} while (rsize > 0);
+
+	if (outpos > 0) {
+		full_write(fd_out, outbuf, outpos);
+//error check??
+		IF_DESKTOP(total_written += outpos;)
+	}
+
+	retval = IF_DESKTOP(total_written) + 0;
+ err:
+	free(inbuf);
+	free(outbuf);
+	free(htab);
+	free(codetab);
+	return retval;
+}