| /* vi: set sw=4 ts=4: */ |
| /* |
| * Mini df implementation for busybox |
| * |
| * Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org> |
| * based on original code by (I think) Bruce Perens <bruce@pixar.com>. |
| * |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. |
| */ |
| /* Mar 16, 2003 Manuel Novoa III (mjn3@codepoet.org) |
| * |
| * Size reduction. Removed floating point dependency. Added error checking |
| * on output. Output stats on 0-sized filesystems if specifically listed on |
| * the command line. Properly round *-blocks, Used, and Available quantities. |
| * |
| * Aug 28, 2008 Bernhard Reutner-Fischer |
| * |
| * Implement -P and -B; better coreutils compat; cleanup |
| */ |
| //config:config DF |
| //config: bool "df (7.5 kb)" |
| //config: default y |
| //config: help |
| //config: df reports the amount of disk space used and available |
| //config: on filesystems. |
| //config: |
| //config:config FEATURE_DF_FANCY |
| //config: bool "Enable -a, -i, -B" |
| //config: default y |
| //config: depends on DF |
| //config: help |
| //config: -a Show all filesystems |
| //config: -i Inodes |
| //config: -B <SIZE> Blocksize |
| |
| //applet:IF_DF(APPLET_NOEXEC(df, df, BB_DIR_BIN, BB_SUID_DROP, df)) |
| |
| //kbuild:lib-$(CONFIG_DF) += df.o |
| |
| /* BB_AUDIT SUSv3 _NOT_ compliant -- option -t missing. */ |
| /* http://www.opengroup.org/onlinepubs/007904975/utilities/df.html */ |
| |
| //usage:#define df_trivial_usage |
| //usage: "[-Pk" |
| //usage: IF_FEATURE_HUMAN_READABLE("mh") |
| //usage: "T" |
| //usage: IF_FEATURE_DF_FANCY("ai] [-B SIZE") |
| //usage: "] [FILESYSTEM]..." |
| //usage:#define df_full_usage "\n\n" |
| //usage: "Print filesystem usage statistics\n" |
| //usage: "\n -P POSIX output format" |
| //usage: "\n -k 1024-byte blocks (default)" |
| //usage: IF_FEATURE_HUMAN_READABLE( |
| //usage: "\n -m 1M-byte blocks" |
| //usage: "\n -h Human readable (e.g. 1K 243M 2G)" |
| //usage: ) |
| //usage: "\n -T Print filesystem type" |
| //usage: IF_FEATURE_DF_FANCY( |
| //usage: "\n -a Show all filesystems" |
| //usage: "\n -i Inodes" |
| //usage: "\n -B SIZE Blocksize" |
| //usage: ) |
| //usage: |
| //usage:#define df_example_usage |
| //usage: "$ df\n" |
| //usage: "Filesystem 1K-blocks Used Available Use% Mounted on\n" |
| //usage: "/dev/sda3 8690864 8553540 137324 98% /\n" |
| //usage: "/dev/sda1 64216 36364 27852 57% /boot\n" |
| //usage: "$ df /dev/sda3\n" |
| //usage: "Filesystem 1K-blocks Used Available Use% Mounted on\n" |
| //usage: "/dev/sda3 8690864 8553540 137324 98% /\n" |
| //usage: "$ POSIXLY_CORRECT=sure df /dev/sda3\n" |
| //usage: "Filesystem 512B-blocks Used Available Use% Mounted on\n" |
| //usage: "/dev/sda3 17381728 17107080 274648 98% /\n" |
| //usage: "$ POSIXLY_CORRECT=yep df -P /dev/sda3\n" |
| //usage: "Filesystem 512-blocks Used Available Capacity Mounted on\n" |
| //usage: "/dev/sda3 17381728 17107080 274648 98% /\n" |
| |
| #include <mntent.h> |
| #include <sys/statvfs.h> |
| #include "libbb.h" |
| #include "unicode.h" |
| |
| #if !ENABLE_FEATURE_HUMAN_READABLE |
| static unsigned long kscale(unsigned long b, unsigned long bs) |
| { |
| return (b * (unsigned long long) bs + 1024/2) / 1024; |
| } |
| #endif |
| |
| int df_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int df_main(int argc UNUSED_PARAM, char **argv) |
| { |
| unsigned long blocks_used; |
| unsigned blocks_percent_used; |
| unsigned long df_disp_hr = 1024; |
| int status = EXIT_SUCCESS; |
| unsigned opt; |
| FILE *mount_table; |
| struct mntent *mount_entry; |
| struct statvfs s; |
| |
| enum { |
| OPT_KILO = (1 << 0), |
| OPT_POSIX = (1 << 1), |
| OPT_FSTYPE = (1 << 2), |
| OPT_ALL = (1 << 3) * ENABLE_FEATURE_DF_FANCY, |
| OPT_INODE = (1 << 4) * ENABLE_FEATURE_DF_FANCY, |
| OPT_BSIZE = (1 << 5) * ENABLE_FEATURE_DF_FANCY, |
| OPT_HUMAN = (1 << (3 + 3*ENABLE_FEATURE_DF_FANCY)) * ENABLE_FEATURE_HUMAN_READABLE, |
| OPT_MEGA = (1 << (4 + 3*ENABLE_FEATURE_DF_FANCY)) * ENABLE_FEATURE_HUMAN_READABLE, |
| }; |
| const char *disp_units_hdr = NULL; |
| char *chp; |
| |
| init_unicode(); |
| |
| opt = getopt32(argv, "^" |
| "kPT" |
| IF_FEATURE_DF_FANCY("aiB:") |
| IF_FEATURE_HUMAN_READABLE("hm") |
| "\0" |
| #if ENABLE_FEATURE_HUMAN_READABLE && ENABLE_FEATURE_DF_FANCY |
| "k-mB:m-Bk:B-km" |
| #elif ENABLE_FEATURE_HUMAN_READABLE |
| "k-m:m-k" |
| #endif |
| IF_FEATURE_DF_FANCY(, &chp) |
| ); |
| if (opt & OPT_MEGA) |
| df_disp_hr = 1024*1024; |
| |
| if (opt & OPT_BSIZE) { |
| /* GNU coreutils 8.25 accepts "-BMiB" form too */ |
| int i; |
| for (i = 0; kmg_i_suffixes[i].suffix[0]; i++) { |
| if (strcmp(kmg_i_suffixes[i].suffix, chp) == 0) { |
| df_disp_hr = kmg_i_suffixes[i].mult; |
| goto got_it; |
| } |
| } |
| /* Range used to disallow 0 */ |
| df_disp_hr = xatoul_range_sfx(chp, 1, ULONG_MAX, kmg_i_suffixes); |
| got_it: ; |
| } |
| |
| /* From the manpage of df from coreutils-6.10: |
| * Disk space is shown in 1K blocks by default, unless the environment |
| * variable POSIXLY_CORRECT is set, in which case 512-byte blocks are used. |
| */ |
| if (getenv("POSIXLY_CORRECT")) /* TODO - a new libbb function? */ |
| df_disp_hr = 512; |
| |
| if (opt & OPT_HUMAN) { |
| df_disp_hr = 0; |
| disp_units_hdr = " Size"; |
| } |
| if (opt & OPT_INODE) |
| disp_units_hdr = " Inodes"; |
| |
| if (disp_units_hdr == NULL) { |
| #if ENABLE_FEATURE_HUMAN_READABLE |
| disp_units_hdr = xasprintf("%s-blocks", |
| /* print df_disp_hr, show no fractionals, |
| * use suffixes if OPT_POSIX is set in opt */ |
| make_human_readable_str(df_disp_hr, 0, !!(opt & OPT_POSIX)) |
| ); |
| #else |
| disp_units_hdr = xasprintf("%lu-blocks", df_disp_hr); |
| #endif |
| } |
| |
| printf("Filesystem %s%-15sUsed Available %s Mounted on\n", |
| (opt & OPT_FSTYPE) ? "Type " : "", |
| disp_units_hdr, |
| (opt & OPT_POSIX) ? "Capacity" : "Use%"); |
| |
| mount_table = NULL; |
| argv += optind; |
| if (!argv[0]) { |
| mount_table = setmntent(bb_path_mtab_file, "r"); |
| if (!mount_table) |
| bb_perror_msg_and_die(bb_path_mtab_file); |
| } |
| |
| while (1) { |
| const char *device; |
| const char *mount_point; |
| const char *fs_type; |
| |
| if (mount_table) { |
| mount_entry = getmntent(mount_table); |
| if (!mount_entry) { |
| endmntent(mount_table); |
| break; |
| } |
| } else { |
| mount_point = *argv++; |
| if (!mount_point) |
| break; |
| mount_entry = find_mount_point(mount_point, 1); |
| if (!mount_entry) { |
| bb_error_msg("%s: can't find mount point", mount_point); |
| set_error: |
| status = EXIT_FAILURE; |
| continue; |
| } |
| } |
| |
| device = mount_entry->mnt_fsname; |
| mount_point = mount_entry->mnt_dir; |
| fs_type = mount_entry->mnt_type; |
| |
| if (statvfs(mount_point, &s) != 0) { |
| bb_simple_perror_msg(mount_point); |
| goto set_error; |
| } |
| /* Some uclibc versions were seen to lose f_frsize |
| * (kernel does return it, but then uclibc does not copy it) |
| */ |
| if (s.f_frsize == 0) |
| s.f_frsize = s.f_bsize; |
| |
| if ((s.f_blocks > 0) || !mount_table || (opt & OPT_ALL)) { |
| if (opt & OPT_INODE) { |
| s.f_blocks = s.f_files; |
| s.f_bavail = s.f_bfree = s.f_ffree; |
| s.f_frsize = 1; |
| |
| if (df_disp_hr) |
| df_disp_hr = 1; |
| } |
| blocks_used = s.f_blocks - s.f_bfree; |
| blocks_percent_used = 0; |
| if (blocks_used + s.f_bavail) { |
| blocks_percent_used = (blocks_used * 100ULL |
| + (blocks_used + s.f_bavail)/2 |
| ) / (blocks_used + s.f_bavail); |
| } |
| |
| /* GNU coreutils 6.10 skips certain mounts, try to be compatible. */ |
| if (ENABLE_FEATURE_SKIP_ROOTFS && strcmp(device, "rootfs") == 0) |
| continue; |
| |
| #ifdef WHY_WE_DO_IT_FOR_DEV_ROOT_ONLY |
| if (strcmp(device, "/dev/root") == 0) { |
| /* Adjusts device to be the real root device, |
| * or leaves device alone if it can't find it */ |
| device = find_block_device("/"); |
| if (!device) { |
| goto set_error; |
| } |
| } |
| #endif |
| |
| #if ENABLE_UNICODE_SUPPORT |
| { |
| uni_stat_t uni_stat; |
| char *uni_dev = unicode_conv_to_printable(&uni_stat, device); |
| if (uni_stat.unicode_width > 20 && !(opt & OPT_POSIX)) { |
| printf("%s\n%20s", uni_dev, ""); |
| } else { |
| printf("%s%*s", uni_dev, 20 - (int)uni_stat.unicode_width, ""); |
| } |
| free(uni_dev); |
| if (opt & OPT_FSTYPE) { |
| char *uni_type = unicode_conv_to_printable(&uni_stat, fs_type); |
| if (uni_stat.unicode_width > 10 && !(opt & OPT_POSIX)) |
| printf(" %s\n%31s", uni_type, ""); |
| else |
| printf(" %s%*s", uni_type, 10 - (int)uni_stat.unicode_width, ""); |
| free(uni_type); |
| } |
| } |
| #else |
| if (printf("\n%-20s" + 1, device) > 20 && !(opt & OPT_POSIX)) |
| printf("\n%-20s", ""); |
| if (opt & OPT_FSTYPE) { |
| if (printf(" %-10s", fs_type) > 11 && !(opt & OPT_POSIX)) |
| printf("\n%-30s", ""); |
| } |
| #endif |
| |
| #if ENABLE_FEATURE_HUMAN_READABLE |
| printf(" %9s ", |
| /* f_blocks x f_frsize / df_disp_hr, show one fractional, |
| * use suffixes if df_disp_hr == 0 */ |
| make_human_readable_str(s.f_blocks, s.f_frsize, df_disp_hr)); |
| |
| printf(" %9s " + 1, |
| /* EXPR x f_frsize / df_disp_hr, show one fractional, |
| * use suffixes if df_disp_hr == 0 */ |
| make_human_readable_str((s.f_blocks - s.f_bfree), |
| s.f_frsize, df_disp_hr)); |
| |
| printf("%9s %3u%% %s\n", |
| /* f_bavail x f_frsize / df_disp_hr, show one fractional, |
| * use suffixes if df_disp_hr == 0 */ |
| make_human_readable_str(s.f_bavail, s.f_frsize, df_disp_hr), |
| blocks_percent_used, mount_point); |
| #else |
| printf(" %9lu %9lu %9lu %3u%% %s\n", |
| kscale(s.f_blocks, s.f_frsize), |
| kscale(s.f_blocks - s.f_bfree, s.f_frsize), |
| kscale(s.f_bavail, s.f_frsize), |
| blocks_percent_used, mount_point); |
| #endif |
| } |
| } |
| |
| return status; |
| } |