| /* vi: set sw=4 ts=4: */ |
| /* |
| * fdisk.c -- Partition table manipulator for Linux. |
| * |
| * Copyright (C) 1992 A. V. Le Blanc (LeBlanc@mcc.ac.uk) |
| * Copyright (C) 2001,2002 Vladimir Oleynik <dzo@simtreas.ru> (initial bb port) |
| * |
| * Licensed under GPLv2 or later, see file LICENSE in this source tree. |
| */ |
| //config:config FDISK |
| //config: bool "fdisk (41 kb)" |
| //config: default y |
| //config: select PLATFORM_LINUX |
| //config: help |
| //config: The fdisk utility is used to divide hard disks into one or more |
| //config: logical disks, which are generally called partitions. This utility |
| //config: can be used to list and edit the set of partitions or BSD style |
| //config: 'disk slices' that are defined on a hard drive. |
| //config: |
| //config:config FDISK_SUPPORT_LARGE_DISKS |
| //config: bool "Support over 4GB disks" |
| //config: default y |
| //config: depends on FDISK |
| //config: depends on !LFS # with LFS no special code is needed |
| //config: |
| //config:config FEATURE_FDISK_WRITABLE |
| //config: bool "Write support" |
| //config: default y |
| //config: depends on FDISK |
| //config: help |
| //config: Enabling this option allows you to create or change a partition table |
| //config: and write those changes out to disk. If you leave this option |
| //config: disabled, you will only be able to view the partition table. |
| //config: |
| //config:config FEATURE_AIX_LABEL |
| //config: bool "Support AIX disklabels" |
| //config: default n |
| //config: depends on FDISK && FEATURE_FDISK_WRITABLE |
| //config: help |
| //config: Enabling this option allows you to create or change AIX disklabels. |
| //config: Most people can safely leave this option disabled. |
| //config: |
| //config:config FEATURE_SGI_LABEL |
| //config: bool "Support SGI disklabels" |
| //config: default n |
| //config: depends on FDISK && FEATURE_FDISK_WRITABLE |
| //config: help |
| //config: Enabling this option allows you to create or change SGI disklabels. |
| //config: Most people can safely leave this option disabled. |
| //config: |
| //config:config FEATURE_SUN_LABEL |
| //config: bool "Support SUN disklabels" |
| //config: default n |
| //config: depends on FDISK && FEATURE_FDISK_WRITABLE |
| //config: help |
| //config: Enabling this option allows you to create or change SUN disklabels. |
| //config: Most people can safely leave this option disabled. |
| //config: |
| //config:config FEATURE_OSF_LABEL |
| //config: bool "Support BSD disklabels" |
| //config: default n |
| //config: depends on FDISK && FEATURE_FDISK_WRITABLE |
| //config: help |
| //config: Enabling this option allows you to create or change BSD disklabels |
| //config: and define and edit BSD disk slices. |
| //config: |
| //config:config FEATURE_GPT_LABEL |
| //config: bool "Support GPT disklabels" |
| //config: default n |
| //config: depends on FDISK && FEATURE_FDISK_WRITABLE |
| //config: help |
| //config: Enabling this option allows you to view GUID Partition Table |
| //config: disklabels. |
| //config: |
| //config:config FEATURE_FDISK_ADVANCED |
| //config: bool "Support expert mode" |
| //config: default y |
| //config: depends on FDISK && FEATURE_FDISK_WRITABLE |
| //config: help |
| //config: Enabling this option allows you to do terribly unsafe things like |
| //config: define arbitrary drive geometry, move the beginning of data in a |
| //config: partition, and similarly evil things. Unless you have a very good |
| //config: reason you would be wise to leave this disabled. |
| |
| //applet:IF_FDISK(APPLET(fdisk, BB_DIR_SBIN, BB_SUID_DROP)) |
| |
| //kbuild:lib-$(CONFIG_FDISK) += fdisk.o |
| |
| /* Looks like someone forgot to add this to config system */ |
| //usage:#ifndef ENABLE_FEATURE_FDISK_BLKSIZE |
| //usage:# define ENABLE_FEATURE_FDISK_BLKSIZE 0 |
| //usage:# define IF_FEATURE_FDISK_BLKSIZE(a) |
| //usage:#endif |
| //usage: |
| //usage:#define fdisk_trivial_usage |
| //usage: "[-ul" IF_FEATURE_FDISK_BLKSIZE("s") "] " |
| //usage: "[-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" |
| //usage:#define fdisk_full_usage "\n\n" |
| //usage: "Change partition table\n" |
| //usage: "\n -u Start and End are in sectors (instead of cylinders)" |
| //usage: "\n -l Show partition table for each DISK, then exit" |
| //usage: IF_FEATURE_FDISK_BLKSIZE( |
| //usage: "\n -s Show partition sizes in kb for each DISK, then exit" |
| //usage: ) |
| //usage: "\n -b 2048 (for certain MO disks) use 2048-byte sectors" |
| //usage: "\n -C CYLINDERS Set number of cylinders/heads/sectors" |
| //usage: "\n -H HEADS Typically 255" |
| //usage: "\n -S SECTORS Typically 63" |
| |
| #ifndef _LARGEFILE64_SOURCE |
| /* For lseek64 */ |
| # define _LARGEFILE64_SOURCE |
| #endif |
| #include <assert.h> /* assert */ |
| #include <sys/mount.h> |
| #if !defined(BLKSSZGET) |
| # define BLKSSZGET _IO(0x12, 104) |
| #endif |
| #if !defined(BLKGETSIZE64) |
| # define BLKGETSIZE64 _IOR(0x12,114,size_t) |
| #endif |
| #include "libbb.h" |
| #include "unicode.h" |
| |
| #if BB_LITTLE_ENDIAN |
| # define inline_if_little_endian ALWAYS_INLINE |
| #else |
| # define inline_if_little_endian /* nothing */ |
| #endif |
| |
| |
| /* Looks like someone forgot to add this to config system */ |
| #ifndef ENABLE_FEATURE_FDISK_BLKSIZE |
| # define ENABLE_FEATURE_FDISK_BLKSIZE 0 |
| # define IF_FEATURE_FDISK_BLKSIZE(a) |
| #endif |
| |
| #define DEFAULT_SECTOR_SIZE 512 |
| #define DEFAULT_SECTOR_SIZE_STR "512" |
| #define MAX_SECTOR_SIZE 2048 |
| #define SECTOR_SIZE 512 /* still used in osf/sgi/sun code */ |
| #define MAXIMUM_PARTS 60 |
| |
| #define ACTIVE_FLAG 0x80 |
| |
| #define EXTENDED 0x05 |
| #define WIN98_EXTENDED 0x0f |
| #define LINUX_PARTITION 0x81 |
| #define LINUX_SWAP 0x82 |
| #define LINUX_NATIVE 0x83 |
| #define LINUX_EXTENDED 0x85 |
| #define LINUX_LVM 0x8e |
| #define LINUX_RAID 0xfd |
| |
| |
| enum { |
| OPT_b = 1 << 0, |
| OPT_C = 1 << 1, |
| OPT_H = 1 << 2, |
| OPT_l = 1 << 3, |
| OPT_S = 1 << 4, |
| OPT_u = 1 << 5, |
| OPT_s = (1 << 6) * ENABLE_FEATURE_FDISK_BLKSIZE, |
| }; |
| |
| |
| typedef unsigned long long ullong; |
| /* Used for sector numbers. Partition formats we know |
| * do not support more than 2^32 sectors |
| */ |
| typedef uint32_t sector_t; |
| #if UINT_MAX == 0xffffffff |
| # define SECT_FMT "" |
| #elif ULONG_MAX == 0xffffffff |
| # define SECT_FMT "l" |
| #else |
| # error Cant detect sizeof(uint32_t) |
| #endif |
| |
| struct hd_geometry { |
| unsigned char heads; |
| unsigned char sectors; |
| unsigned short cylinders; |
| unsigned long start; |
| }; |
| |
| #define HDIO_GETGEO 0x0301 /* get device geometry */ |
| |
| /* TODO: #if ENABLE_FEATURE_FDISK_WRITABLE */ |
| /* (currently fdisk_sun/sgi.c do not have proper WRITABLE #ifs) */ |
| static const char msg_building_new_label[] ALIGN1 = |
| "Building a new %s. Changes will remain in memory only,\n" |
| "until you decide to write them. After that the previous content\n" |
| "won't be recoverable.\n\n"; |
| |
| static const char msg_part_already_defined[] ALIGN1 = |
| "Partition %u is already defined, delete it before re-adding\n"; |
| /* #endif */ |
| |
| |
| struct partition { |
| unsigned char boot_ind; /* 0x80 - active */ |
| unsigned char head; /* starting head */ |
| unsigned char sector; /* starting sector */ |
| unsigned char cyl; /* starting cylinder */ |
| unsigned char sys_ind; /* what partition type */ |
| unsigned char end_head; /* end head */ |
| unsigned char end_sector; /* end sector */ |
| unsigned char end_cyl; /* end cylinder */ |
| unsigned char start4[4]; /* starting sector counting from 0 */ |
| unsigned char size4[4]; /* nr of sectors in partition */ |
| } PACKED; |
| |
| /* |
| * per partition table entry data |
| * |
| * The four primary partitions have the same sectorbuffer (MBRbuffer) |
| * and have NULL ext_pointer. |
| * Each logical partition table entry has two pointers, one for the |
| * partition and one link to the next one. |
| */ |
| struct pte { |
| struct partition *part_table; /* points into sectorbuffer */ |
| struct partition *ext_pointer; /* points into sectorbuffer */ |
| sector_t offset_from_dev_start; /* disk sector number */ |
| char *sectorbuffer; /* disk sector contents */ |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| char changed; /* boolean */ |
| #endif |
| }; |
| |
| #define unable_to_open "can't open '%s'" |
| #define unable_to_read "can't read from %s" |
| #define unable_to_seek "can't seek on %s" |
| |
| enum label_type { |
| LABEL_DOS, LABEL_SUN, LABEL_SGI, LABEL_AIX, LABEL_OSF, LABEL_GPT |
| }; |
| |
| #define LABEL_IS_DOS (LABEL_DOS == current_label_type) |
| |
| #if ENABLE_FEATURE_SUN_LABEL |
| #define LABEL_IS_SUN (LABEL_SUN == current_label_type) |
| #define STATIC_SUN static |
| #else |
| #define LABEL_IS_SUN 0 |
| #define STATIC_SUN extern |
| #endif |
| |
| #if ENABLE_FEATURE_SGI_LABEL |
| #define LABEL_IS_SGI (LABEL_SGI == current_label_type) |
| #define STATIC_SGI static |
| #else |
| #define LABEL_IS_SGI 0 |
| #define STATIC_SGI extern |
| #endif |
| |
| #if ENABLE_FEATURE_AIX_LABEL |
| #define LABEL_IS_AIX (LABEL_AIX == current_label_type) |
| #define STATIC_AIX static |
| #else |
| #define LABEL_IS_AIX 0 |
| #define STATIC_AIX extern |
| #endif |
| |
| #if ENABLE_FEATURE_OSF_LABEL |
| #define LABEL_IS_OSF (LABEL_OSF == current_label_type) |
| #define STATIC_OSF static |
| #else |
| #define LABEL_IS_OSF 0 |
| #define STATIC_OSF extern |
| #endif |
| |
| #if ENABLE_FEATURE_GPT_LABEL |
| #define LABEL_IS_GPT (LABEL_GPT == current_label_type) |
| #define STATIC_GPT static |
| #else |
| #define LABEL_IS_GPT 0 |
| #define STATIC_GPT extern |
| #endif |
| |
| enum action { OPEN_MAIN, TRY_ONLY, CREATE_EMPTY_DOS, CREATE_EMPTY_SUN }; |
| |
| static void update_units(void); |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| static void change_units(void); |
| static void reread_partition_table(int leave); |
| static void delete_partition(int i); |
| static unsigned get_partition(int warn, unsigned max); |
| static void list_types(const char *const *sys); |
| static sector_t read_int(sector_t low, sector_t dflt, sector_t high, sector_t base, const char *mesg); |
| #endif |
| static const char *partition_type(unsigned char type); |
| static void get_geometry(void); |
| static void read_pte(struct pte *pe, sector_t offset); |
| #if ENABLE_FEATURE_SUN_LABEL || ENABLE_FEATURE_FDISK_WRITABLE |
| static int get_boot(enum action what); |
| #else |
| static int get_boot(void); |
| #endif |
| |
| #define PLURAL 0 |
| #define SINGULAR 1 |
| |
| static sector_t get_start_sect(const struct partition *p); |
| static sector_t get_nr_sects(const struct partition *p); |
| |
| /* DOS partition types */ |
| |
| static const char *const i386_sys_types[] = { |
| "\x00" "Empty", |
| "\x01" "FAT12", |
| "\x04" "FAT16 <32M", |
| "\x05" "Extended", /* DOS 3.3+ extended partition */ |
| "\x06" "FAT16", /* DOS 16-bit >=32M */ |
| "\x07" "HPFS/NTFS", /* OS/2 IFS, eg, HPFS or NTFS or QNX */ |
| "\x0a" "OS/2 Boot Manager",/* OS/2 Boot Manager */ |
| "\x0b" "Win95 FAT32", |
| "\x0c" "Win95 FAT32 (LBA)",/* LBA really is 'Extended Int 13h' */ |
| "\x0e" "Win95 FAT16 (LBA)", |
| "\x0f" "Win95 Ext'd (LBA)", |
| "\x11" "Hidden FAT12", |
| "\x12" "Compaq diagnostics", |
| "\x14" "Hidden FAT16 <32M", |
| "\x16" "Hidden FAT16", |
| "\x17" "Hidden HPFS/NTFS", |
| "\x1b" "Hidden Win95 FAT32", |
| "\x1c" "Hidden W95 FAT32 (LBA)", |
| "\x1e" "Hidden W95 FAT16 (LBA)", |
| "\x3c" "Part.Magic recovery", |
| "\x41" "PPC PReP Boot", |
| "\x42" "SFS", |
| "\x63" "GNU HURD or SysV", /* GNU HURD or Mach or Sys V/386 (such as ISC UNIX) */ |
| "\x80" "Old Minix", /* Minix 1.4a and earlier */ |
| "\x81" "Minix / old Linux",/* Minix 1.4b and later */ |
| "\x82" "Linux swap", /* also Solaris */ |
| "\x83" "Linux", |
| "\x84" "OS/2 hidden C: drive", |
| "\x85" "Linux extended", |
| "\x86" "NTFS volume set", |
| "\x87" "NTFS volume set", |
| "\x8e" "Linux LVM", |
| "\x9f" "BSD/OS", /* BSDI */ |
| "\xa0" "Thinkpad hibernation", |
| "\xa5" "FreeBSD", /* various BSD flavours */ |
| "\xa6" "OpenBSD", |
| "\xa8" "Darwin UFS", |
| "\xa9" "NetBSD", |
| "\xab" "Darwin boot", |
| "\xb7" "BSDI fs", |
| "\xb8" "BSDI swap", |
| "\xbe" "Solaris boot", |
| "\xeb" "BeOS fs", |
| "\xee" "EFI GPT", /* Intel EFI GUID Partition Table */ |
| "\xef" "EFI (FAT-12/16/32)", /* Intel EFI System Partition */ |
| "\xf0" "Linux/PA-RISC boot", /* Linux/PA-RISC boot loader */ |
| "\xf2" "DOS secondary", /* DOS 3.3+ secondary */ |
| "\xfd" "Linux raid autodetect", /* New (2.2.x) raid partition with |
| autodetect using persistent |
| superblock */ |
| #if 0 /* ENABLE_WEIRD_PARTITION_TYPES */ |
| "\x02" "XENIX root", |
| "\x03" "XENIX usr", |
| "\x08" "AIX", /* AIX boot (AIX -- PS/2 port) or SplitDrive */ |
| "\x09" "AIX bootable", /* AIX data or Coherent */ |
| "\x10" "OPUS", |
| "\x18" "AST SmartSleep", |
| "\x24" "NEC DOS", |
| "\x39" "Plan 9", |
| "\x40" "Venix 80286", |
| "\x4d" "QNX4.x", |
| "\x4e" "QNX4.x 2nd part", |
| "\x4f" "QNX4.x 3rd part", |
| "\x50" "OnTrack DM", |
| "\x51" "OnTrack DM6 Aux1", /* (or Novell) */ |
| "\x52" "CP/M", /* CP/M or Microport SysV/AT */ |
| "\x53" "OnTrack DM6 Aux3", |
| "\x54" "OnTrackDM6", |
| "\x55" "EZ-Drive", |
| "\x56" "Golden Bow", |
| "\x5c" "Priam Edisk", |
| "\x61" "SpeedStor", |
| "\x64" "Novell Netware 286", |
| "\x65" "Novell Netware 386", |
| "\x70" "DiskSecure Multi-Boot", |
| "\x75" "PC/IX", |
| "\x93" "Amoeba", |
| "\x94" "Amoeba BBT", /* (bad block table) */ |
| "\xa7" "NeXTSTEP", |
| "\xbb" "Boot Wizard hidden", |
| "\xc1" "DRDOS/sec (FAT-12)", |
| "\xc4" "DRDOS/sec (FAT-16 < 32M)", |
| "\xc6" "DRDOS/sec (FAT-16)", |
| "\xc7" "Syrinx", |
| "\xda" "Non-FS data", |
| "\xdb" "CP/M / CTOS / ...",/* CP/M or Concurrent CP/M or |
| Concurrent DOS or CTOS */ |
| "\xde" "Dell Utility", /* Dell PowerEdge Server utilities */ |
| "\xdf" "BootIt", /* BootIt EMBRM */ |
| "\xe1" "DOS access", /* DOS access or SpeedStor 12-bit FAT |
| extended partition */ |
| "\xe3" "DOS R/O", /* DOS R/O or SpeedStor */ |
| "\xe4" "SpeedStor", /* SpeedStor 16-bit FAT extended |
| partition < 1024 cyl. */ |
| "\xf1" "SpeedStor", |
| "\xf4" "SpeedStor", /* SpeedStor large partition */ |
| "\xfe" "LANstep", /* SpeedStor >1024 cyl. or LANstep */ |
| "\xff" "BBT", /* Xenix Bad Block Table */ |
| #endif |
| NULL |
| }; |
| |
| enum { |
| dev_fd = 3 /* the disk */ |
| }; |
| |
| /* Globals */ |
| struct globals { |
| char *line_ptr; |
| |
| const char *disk_device; |
| int g_partitions; // = 4; /* maximum partition + 1 */ |
| unsigned units_per_sector; // = 1; |
| unsigned sector_size; // = DEFAULT_SECTOR_SIZE; |
| unsigned user_set_sector_size; |
| unsigned sector_offset; // = 1; |
| unsigned g_heads, g_sectors, g_cylinders; |
| smallint /* enum label_type */ current_label_type; |
| smallint display_in_cyl_units; |
| #if ENABLE_FEATURE_OSF_LABEL |
| smallint possibly_osf_label; |
| #endif |
| |
| smallint listing; /* no aborts for fdisk -l */ |
| smallint dos_compatible_flag; // = 1; |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| //int dos_changed; |
| smallint nowarn; /* no warnings for fdisk -l/-s */ |
| #endif |
| int ext_index; /* the prime extended partition */ |
| unsigned user_cylinders, user_heads, user_sectors; |
| unsigned pt_heads, pt_sectors; |
| unsigned kern_heads, kern_sectors; |
| sector_t extended_offset; /* offset of link pointers */ |
| sector_t total_number_of_sectors; |
| |
| jmp_buf listingbuf; |
| char line_buffer[80]; |
| /* Raw disk label. For DOS-type partition tables the MBR, |
| * with descriptions of the primary partitions. */ |
| char MBRbuffer[MAX_SECTOR_SIZE]; |
| /* Partition tables */ |
| struct pte ptes[MAXIMUM_PARTS]; |
| }; |
| #define G (*ptr_to_globals) |
| #define line_ptr (G.line_ptr ) |
| #define disk_device (G.disk_device ) |
| #define g_partitions (G.g_partitions ) |
| #define units_per_sector (G.units_per_sector ) |
| #define sector_size (G.sector_size ) |
| #define user_set_sector_size (G.user_set_sector_size) |
| #define sector_offset (G.sector_offset ) |
| #define g_heads (G.g_heads ) |
| #define g_sectors (G.g_sectors ) |
| #define g_cylinders (G.g_cylinders ) |
| #define current_label_type (G.current_label_type ) |
| #define display_in_cyl_units (G.display_in_cyl_units) |
| #define possibly_osf_label (G.possibly_osf_label ) |
| #define listing (G.listing ) |
| #define dos_compatible_flag (G.dos_compatible_flag ) |
| #define nowarn (G.nowarn ) |
| #define ext_index (G.ext_index ) |
| #define user_cylinders (G.user_cylinders ) |
| #define user_heads (G.user_heads ) |
| #define user_sectors (G.user_sectors ) |
| #define pt_heads (G.pt_heads ) |
| #define pt_sectors (G.pt_sectors ) |
| #define kern_heads (G.kern_heads ) |
| #define kern_sectors (G.kern_sectors ) |
| #define extended_offset (G.extended_offset ) |
| #define total_number_of_sectors (G.total_number_of_sectors) |
| #define listingbuf (G.listingbuf ) |
| #define line_buffer (G.line_buffer ) |
| #define MBRbuffer (G.MBRbuffer ) |
| #define ptes (G.ptes ) |
| #define INIT_G() do { \ |
| SET_PTR_TO_GLOBALS(xzalloc(sizeof(G))); \ |
| sector_size = DEFAULT_SECTOR_SIZE; \ |
| sector_offset = 1; \ |
| g_partitions = 4; \ |
| units_per_sector = 1; \ |
| dos_compatible_flag = 1; \ |
| } while (0) |
| |
| |
| /* TODO: move to libbb? */ |
| /* TODO: return unsigned long long, FEATURE_FDISK_BLKSIZE _can_ handle |
| * disks > 2^32 sectors |
| */ |
| static sector_t bb_BLKGETSIZE_sectors(int fd) |
| { |
| uint64_t v64; |
| unsigned long longsectors; |
| |
| if (ioctl(fd, BLKGETSIZE64, &v64) == 0) { |
| /* Got bytes, convert to 512 byte sectors */ |
| v64 >>= 9; |
| if (v64 != (sector_t)v64) { |
| ret_trunc: |
| /* Not only DOS, but all other partition tables |
| * we support can't record more than 32 bit |
| * sector counts or offsets |
| */ |
| bb_error_msg("device has more than 2^32 sectors, can't use all of them"); |
| v64 = (uint32_t)-1L; |
| } |
| return v64; |
| } |
| /* Needs temp of type long */ |
| if (ioctl(fd, BLKGETSIZE, &longsectors)) { |
| /* Perhaps this is a disk image */ |
| off_t sz = lseek(fd, 0, SEEK_END); |
| longsectors = 0; |
| if (sz > 0) |
| longsectors = (uoff_t)sz / sector_size; |
| lseek(fd, 0, SEEK_SET); |
| } |
| if (sizeof(long) > sizeof(sector_t) |
| && longsectors != (sector_t)longsectors |
| ) { |
| goto ret_trunc; |
| } |
| return longsectors; |
| } |
| |
| |
| #define IS_EXTENDED(i) \ |
| ((i) == EXTENDED || (i) == WIN98_EXTENDED || (i) == LINUX_EXTENDED) |
| |
| #define cround(n) (display_in_cyl_units ? ((n)/units_per_sector)+1 : (n)) |
| |
| #define scround(x) (((x)+units_per_sector-1)/units_per_sector) |
| |
| #define pt_offset(b, n) \ |
| ((struct partition *)((b) + 0x1be + (n) * sizeof(struct partition))) |
| |
| #define sector(s) ((s) & 0x3f) |
| |
| #define cylinder(s, c) ((c) | (((s) & 0xc0) << 2)) |
| |
| static void |
| close_dev_fd(void) |
| { |
| /* Not really closing, but making sure it is open, and to harmless place */ |
| xmove_fd(xopen(bb_dev_null, O_RDONLY), dev_fd); |
| } |
| |
| /* Return partition name */ |
| static const char * |
| partname(const char *dev, int pno, int lth) |
| { |
| const char *p; |
| int w, wp; |
| int bufsiz; |
| char *bufp; |
| |
| bufp = auto_string(xzalloc(80)); |
| bufsiz = 80; |
| |
| w = strlen(dev); |
| p = ""; |
| |
| if (isdigit(dev[w-1])) |
| p = "p"; |
| |
| /* devfs kludge - note: fdisk partition names are not supposed |
| to equal kernel names, so there is no reason to do this */ |
| if (strcmp(dev + w - 4, "disc") == 0) { |
| w -= 4; |
| p = "part"; |
| } |
| |
| wp = strlen(p); |
| |
| if (lth) { |
| snprintf(bufp, bufsiz, "%*.*s%s%-2u", |
| lth-wp-2, w, dev, p, pno); |
| } else { |
| snprintf(bufp, bufsiz, "%.*s%s%-2u", w, dev, p, pno); |
| } |
| return bufp; |
| } |
| |
| static ALWAYS_INLINE struct partition * |
| get_part_table(int i) |
| { |
| return ptes[i].part_table; |
| } |
| |
| static const char * |
| str_units(int n) |
| { /* n==1: use singular */ |
| if (n == 1) |
| return display_in_cyl_units ? "cylinder" : "sector"; |
| return display_in_cyl_units ? "cylinders" : "sectors"; |
| } |
| |
| static int |
| valid_part_table_flag(const char *mbuffer) |
| { |
| return (mbuffer[510] == 0x55 && (uint8_t)mbuffer[511] == 0xaa); |
| } |
| |
| static void fdisk_fatal(const char *why) |
| { |
| if (listing) { |
| close_dev_fd(); |
| longjmp(listingbuf, 1); |
| } |
| bb_error_msg_and_die(why, disk_device); |
| } |
| |
| static void |
| seek_sector(sector_t secno) |
| { |
| #if ENABLE_FDISK_SUPPORT_LARGE_DISKS |
| off64_t off = (off64_t)secno * sector_size; |
| if (lseek64(dev_fd, off, SEEK_SET) == (off64_t) -1) |
| fdisk_fatal(unable_to_seek); |
| #else |
| uint64_t off = (uint64_t)secno * sector_size; |
| if (off > MAXINT(off_t) |
| || lseek(dev_fd, (off_t)off, SEEK_SET) == (off_t) -1 |
| ) { |
| fdisk_fatal(unable_to_seek); |
| } |
| #endif |
| } |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| static void |
| set_all_unchanged(void) |
| { |
| int i; |
| |
| for (i = 0; i < MAXIMUM_PARTS; i++) |
| ptes[i].changed = 0; |
| } |
| |
| static ALWAYS_INLINE void |
| set_changed(int i) |
| { |
| ptes[i].changed = 1; |
| } |
| |
| static ALWAYS_INLINE void |
| write_part_table_flag(char *b) |
| { |
| b[510] = 0x55; |
| b[511] = 0xaa; |
| } |
| |
| /* Read line; return 0 or first printable non-space char */ |
| static int |
| read_line(const char *prompt) |
| { |
| int sz; |
| |
| sz = read_line_input(NULL, prompt, line_buffer, sizeof(line_buffer)); |
| if (sz <= 0) |
| exit(EXIT_SUCCESS); /* Ctrl-D or Ctrl-C */ |
| |
| if (line_buffer[sz-1] == '\n') |
| line_buffer[--sz] = '\0'; |
| |
| line_ptr = line_buffer; |
| while (*line_ptr != '\0' && (unsigned char)*line_ptr <= ' ') |
| line_ptr++; |
| return *line_ptr; |
| } |
| |
| static char |
| read_nonempty(const char *mesg) |
| { |
| while (!read_line(mesg)) |
| continue; |
| return *line_ptr; |
| } |
| |
| static char |
| read_maybe_empty(const char *mesg) |
| { |
| if (!read_line(mesg)) { |
| line_ptr = line_buffer; |
| line_ptr[0] = '\n'; |
| line_ptr[1] = '\0'; |
| } |
| return line_ptr[0]; |
| } |
| |
| static int |
| read_hex(const char *const *sys) |
| { |
| unsigned long v; |
| while (1) { |
| read_nonempty("Hex code (type L to list codes): "); |
| if ((line_ptr[0] | 0x20) == 'l') { |
| list_types(sys); |
| continue; |
| } |
| v = bb_strtoul(line_ptr, NULL, 16); |
| if (v <= 0xff) |
| return v; |
| } |
| } |
| |
| static void |
| write_sector(sector_t secno, const void *buf) |
| { |
| seek_sector(secno); |
| xwrite(dev_fd, buf, sector_size); |
| } |
| #endif /* FEATURE_FDISK_WRITABLE */ |
| |
| |
| #include "fdisk_aix.c" |
| |
| struct sun_partition { |
| unsigned char info[128]; /* Informative text string */ |
| unsigned char spare0[14]; |
| struct sun_info { |
| unsigned char spare1; |
| unsigned char id; |
| unsigned char spare2; |
| unsigned char flags; |
| } infos[8]; |
| unsigned char spare1[246]; /* Boot information etc. */ |
| unsigned short rspeed; /* Disk rotational speed */ |
| unsigned short pcylcount; /* Physical cylinder count */ |
| unsigned short sparecyl; /* extra sects per cylinder */ |
| unsigned char spare2[4]; /* More magic... */ |
| unsigned short ilfact; /* Interleave factor */ |
| unsigned short ncyl; /* Data cylinder count */ |
| unsigned short nacyl; /* Alt. cylinder count */ |
| unsigned short ntrks; /* Tracks per cylinder */ |
| unsigned short nsect; /* Sectors per track */ |
| unsigned char spare3[4]; /* Even more magic... */ |
| struct sun_partinfo { |
| uint32_t start_cylinder; |
| uint32_t num_sectors; |
| } partitions[8]; |
| unsigned short magic; /* Magic number */ |
| unsigned short csum; /* Label xor'd checksum */ |
| } FIX_ALIASING; |
| typedef struct sun_partition sun_partition; |
| #define sunlabel ((sun_partition *)MBRbuffer) |
| STATIC_OSF void bsd_select(void); |
| STATIC_OSF void xbsd_print_disklabel(int); |
| #include "fdisk_osf.c" |
| |
| STATIC_GPT void gpt_list_table(int xtra); |
| #include "fdisk_gpt.c" |
| |
| #if ENABLE_FEATURE_SGI_LABEL || ENABLE_FEATURE_SUN_LABEL |
| static uint16_t |
| fdisk_swap16(uint16_t x) |
| { |
| return (x << 8) | (x >> 8); |
| } |
| |
| static uint32_t |
| fdisk_swap32(uint32_t x) |
| { |
| return (x << 24) | |
| ((x & 0xFF00) << 8) | |
| ((x & 0xFF0000) >> 8) | |
| (x >> 24); |
| } |
| #endif |
| |
| STATIC_SGI const char *const sgi_sys_types[]; |
| STATIC_SGI unsigned sgi_get_num_sectors(int i); |
| STATIC_SGI int sgi_get_sysid(int i); |
| STATIC_SGI void sgi_delete_partition(int i); |
| STATIC_SGI void sgi_change_sysid(int i, int sys); |
| STATIC_SGI void sgi_list_table(int xtra); |
| #if ENABLE_FEATURE_FDISK_ADVANCED |
| STATIC_SGI void sgi_set_xcyl(void); |
| #endif |
| STATIC_SGI int verify_sgi(int verbose); |
| STATIC_SGI void sgi_add_partition(int n, int sys); |
| STATIC_SGI void sgi_set_swappartition(int i); |
| STATIC_SGI const char *sgi_get_bootfile(void); |
| STATIC_SGI void sgi_set_bootfile(const char* aFile); |
| STATIC_SGI void create_sgiinfo(void); |
| STATIC_SGI void sgi_write_table(void); |
| STATIC_SGI void sgi_set_bootpartition(int i); |
| #include "fdisk_sgi.c" |
| |
| STATIC_SUN const char *const sun_sys_types[]; |
| STATIC_SUN void sun_delete_partition(int i); |
| STATIC_SUN void sun_change_sysid(int i, int sys); |
| STATIC_SUN void sun_list_table(int xtra); |
| STATIC_SUN void add_sun_partition(int n, int sys); |
| #if ENABLE_FEATURE_FDISK_ADVANCED |
| STATIC_SUN void sun_set_alt_cyl(void); |
| STATIC_SUN void sun_set_ncyl(int cyl); |
| STATIC_SUN void sun_set_xcyl(void); |
| STATIC_SUN void sun_set_ilfact(void); |
| STATIC_SUN void sun_set_rspeed(void); |
| STATIC_SUN void sun_set_pcylcount(void); |
| #endif |
| STATIC_SUN void toggle_sunflags(int i, unsigned char mask); |
| STATIC_SUN void verify_sun(void); |
| STATIC_SUN void sun_write_table(void); |
| #include "fdisk_sun.c" |
| |
| |
| static inline_if_little_endian unsigned |
| read4_little_endian(const unsigned char *cp) |
| { |
| uint32_t v; |
| move_from_unaligned32(v, cp); |
| return SWAP_LE32(v); |
| } |
| |
| static sector_t |
| get_start_sect(const struct partition *p) |
| { |
| return read4_little_endian(p->start4); |
| } |
| |
| static sector_t |
| get_nr_sects(const struct partition *p) |
| { |
| return read4_little_endian(p->size4); |
| } |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| /* start_sect and nr_sects are stored little endian on all machines */ |
| /* moreover, they are not aligned correctly */ |
| static inline_if_little_endian void |
| store4_little_endian(unsigned char *cp, unsigned val) |
| { |
| uint32_t v = SWAP_LE32(val); |
| move_to_unaligned32(cp, v); |
| } |
| |
| static void |
| set_start_sect(struct partition *p, unsigned start_sect) |
| { |
| store4_little_endian(p->start4, start_sect); |
| } |
| |
| static void |
| set_nr_sects(struct partition *p, unsigned nr_sects) |
| { |
| store4_little_endian(p->size4, nr_sects); |
| } |
| #endif |
| |
| /* Allocate a buffer and read a partition table sector */ |
| static void |
| read_pte(struct pte *pe, sector_t offset) |
| { |
| pe->offset_from_dev_start = offset; |
| pe->sectorbuffer = xzalloc(sector_size); |
| seek_sector(offset); |
| /* xread would make us abort - bad for fdisk -l */ |
| if (full_read(dev_fd, pe->sectorbuffer, sector_size) != sector_size) |
| fdisk_fatal(unable_to_read); |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| pe->changed = 0; |
| #endif |
| pe->part_table = pe->ext_pointer = NULL; |
| } |
| |
| static sector_t |
| get_partition_start_from_dev_start(const struct pte *pe) |
| { |
| return pe->offset_from_dev_start + get_start_sect(pe->part_table); |
| } |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| /* |
| * Avoid warning about DOS partitions when no DOS partition was changed. |
| * Here a heuristic "is probably dos partition". |
| * We might also do the opposite and warn in all cases except |
| * for "is probably nondos partition". |
| */ |
| #ifdef UNUSED |
| static int |
| is_dos_partition(int t) |
| { |
| return (t == 1 || t == 4 || t == 6 || |
| t == 0x0b || t == 0x0c || t == 0x0e || |
| t == 0x11 || t == 0x12 || t == 0x14 || t == 0x16 || |
| t == 0x1b || t == 0x1c || t == 0x1e || t == 0x24 || |
| t == 0xc1 || t == 0xc4 || t == 0xc6); |
| } |
| #endif |
| |
| static void |
| menu(void) |
| { |
| puts("Command Action"); |
| if (LABEL_IS_SUN) { |
| puts("a\ttoggle a read only flag"); /* sun */ |
| puts("b\tedit bsd disklabel"); |
| puts("c\ttoggle the mountable flag"); /* sun */ |
| puts("d\tdelete a partition"); |
| puts("l\tlist known partition types"); |
| puts("n\tadd a new partition"); |
| puts("o\tcreate a new empty DOS partition table"); |
| puts("p\tprint the partition table"); |
| puts("q\tquit without saving changes"); |
| puts("s\tcreate a new empty Sun disklabel"); /* sun */ |
| puts("t\tchange a partition's system id"); |
| puts("u\tchange display/entry units"); |
| puts("v\tverify the partition table"); |
| puts("w\twrite table to disk and exit"); |
| #if ENABLE_FEATURE_FDISK_ADVANCED |
| puts("x\textra functionality (experts only)"); |
| #endif |
| } else if (LABEL_IS_SGI) { |
| puts("a\tselect bootable partition"); /* sgi flavour */ |
| puts("b\tedit bootfile entry"); /* sgi */ |
| puts("c\tselect sgi swap partition"); /* sgi flavour */ |
| puts("d\tdelete a partition"); |
| puts("l\tlist known partition types"); |
| puts("n\tadd a new partition"); |
| puts("o\tcreate a new empty DOS partition table"); |
| puts("p\tprint the partition table"); |
| puts("q\tquit without saving changes"); |
| puts("s\tcreate a new empty Sun disklabel"); /* sun */ |
| puts("t\tchange a partition's system id"); |
| puts("u\tchange display/entry units"); |
| puts("v\tverify the partition table"); |
| puts("w\twrite table to disk and exit"); |
| } else if (LABEL_IS_AIX) { |
| puts("o\tcreate a new empty DOS partition table"); |
| puts("q\tquit without saving changes"); |
| puts("s\tcreate a new empty Sun disklabel"); /* sun */ |
| } else if (LABEL_IS_GPT) { |
| puts("o\tcreate a new empty DOS partition table"); |
| puts("p\tprint the partition table"); |
| puts("q\tquit without saving changes"); |
| puts("s\tcreate a new empty Sun disklabel"); /* sun */ |
| } else { |
| puts("a\ttoggle a bootable flag"); |
| puts("b\tedit bsd disklabel"); |
| puts("c\ttoggle the dos compatibility flag"); |
| puts("d\tdelete a partition"); |
| puts("l\tlist known partition types"); |
| puts("n\tadd a new partition"); |
| puts("o\tcreate a new empty DOS partition table"); |
| puts("p\tprint the partition table"); |
| puts("q\tquit without saving changes"); |
| puts("s\tcreate a new empty Sun disklabel"); /* sun */ |
| puts("t\tchange a partition's system id"); |
| puts("u\tchange display/entry units"); |
| puts("v\tverify the partition table"); |
| puts("w\twrite table to disk and exit"); |
| #if ENABLE_FEATURE_FDISK_ADVANCED |
| puts("x\textra functionality (experts only)"); |
| #endif |
| } |
| } |
| #endif /* FEATURE_FDISK_WRITABLE */ |
| |
| |
| #if ENABLE_FEATURE_FDISK_ADVANCED |
| static void |
| xmenu(void) |
| { |
| puts("Command Action"); |
| if (LABEL_IS_SUN) { |
| puts("a\tchange number of alternate cylinders"); /*sun*/ |
| puts("c\tchange number of cylinders"); |
| puts("d\tprint the raw data in the partition table"); |
| puts("e\tchange number of extra sectors per cylinder");/*sun*/ |
| puts("h\tchange number of heads"); |
| puts("i\tchange interleave factor"); /*sun*/ |
| puts("o\tchange rotation speed (rpm)"); /*sun*/ |
| puts("p\tprint the partition table"); |
| puts("q\tquit without saving changes"); |
| puts("r\treturn to main menu"); |
| puts("s\tchange number of sectors/track"); |
| puts("v\tverify the partition table"); |
| puts("w\twrite table to disk and exit"); |
| puts("y\tchange number of physical cylinders"); /*sun*/ |
| } else if (LABEL_IS_SGI) { |
| puts("b\tmove beginning of data in a partition"); /* !sun */ |
| puts("c\tchange number of cylinders"); |
| puts("d\tprint the raw data in the partition table"); |
| puts("e\tlist extended partitions"); /* !sun */ |
| puts("g\tcreate an IRIX (SGI) partition table");/* sgi */ |
| puts("h\tchange number of heads"); |
| puts("p\tprint the partition table"); |
| puts("q\tquit without saving changes"); |
| puts("r\treturn to main menu"); |
| puts("s\tchange number of sectors/track"); |
| puts("v\tverify the partition table"); |
| puts("w\twrite table to disk and exit"); |
| } else if (LABEL_IS_AIX) { |
| puts("b\tmove beginning of data in a partition"); /* !sun */ |
| puts("c\tchange number of cylinders"); |
| puts("d\tprint the raw data in the partition table"); |
| puts("e\tlist extended partitions"); /* !sun */ |
| puts("g\tcreate an IRIX (SGI) partition table");/* sgi */ |
| puts("h\tchange number of heads"); |
| puts("p\tprint the partition table"); |
| puts("q\tquit without saving changes"); |
| puts("r\treturn to main menu"); |
| puts("s\tchange number of sectors/track"); |
| puts("v\tverify the partition table"); |
| puts("w\twrite table to disk and exit"); |
| } else { |
| puts("b\tmove beginning of data in a partition"); /* !sun */ |
| puts("c\tchange number of cylinders"); |
| puts("d\tprint the raw data in the partition table"); |
| puts("e\tlist extended partitions"); /* !sun */ |
| puts("f\tfix partition order"); /* !sun, !aix, !sgi */ |
| #if ENABLE_FEATURE_SGI_LABEL |
| puts("g\tcreate an IRIX (SGI) partition table");/* sgi */ |
| #endif |
| puts("h\tchange number of heads"); |
| puts("p\tprint the partition table"); |
| puts("q\tquit without saving changes"); |
| puts("r\treturn to main menu"); |
| puts("s\tchange number of sectors/track"); |
| puts("v\tverify the partition table"); |
| puts("w\twrite table to disk and exit"); |
| } |
| } |
| #endif /* ADVANCED mode */ |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| static const char *const * |
| get_sys_types(void) |
| { |
| return ( |
| LABEL_IS_SUN ? sun_sys_types : |
| LABEL_IS_SGI ? sgi_sys_types : |
| i386_sys_types); |
| } |
| #else |
| #define get_sys_types() i386_sys_types |
| #endif |
| |
| static const char * |
| partition_type(unsigned char type) |
| { |
| int i; |
| const char *const *types = get_sys_types(); |
| |
| for (i = 0; types[i]; i++) |
| if ((unsigned char)types[i][0] == type) |
| return types[i] + 1; |
| |
| return "Unknown"; |
| } |
| |
| static int |
| is_cleared_partition(const struct partition *p) |
| { |
| /* We consider partition "cleared" only if it has only zeros */ |
| const char *cp = (const char *)p; |
| int cnt = sizeof(*p); |
| char bits = 0; |
| while (--cnt >= 0) |
| bits |= *cp++; |
| return (bits == 0); |
| } |
| |
| static void |
| clear_partition(struct partition *p) |
| { |
| if (p) |
| memset(p, 0, sizeof(*p)); |
| } |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| static int |
| get_sysid(int i) |
| { |
| return LABEL_IS_SUN ? sunlabel->infos[i].id : |
| (LABEL_IS_SGI ? sgi_get_sysid(i) : |
| ptes[i].part_table->sys_ind); |
| } |
| |
| static void |
| list_types(const char *const *sys) |
| { |
| enum { COLS = 3 }; |
| |
| unsigned last[COLS]; |
| unsigned done, next, size; |
| int i; |
| |
| for (size = 0; sys[size]; size++) |
| continue; |
| |
| done = 0; |
| for (i = COLS-1; i >= 0; i--) { |
| done += (size + i - done) / (i + 1); |
| last[COLS-1 - i] = done; |
| } |
| |
| i = done = next = 0; |
| do { |
| printf("%c%2x %-22.22s", i ? ' ' : '\n', |
| (unsigned char)sys[next][0], |
| sys[next] + 1); |
| next = last[i++] + done; |
| if (i >= COLS || next >= last[i]) { |
| i = 0; |
| next = ++done; |
| } |
| } while (done < last[0]); |
| bb_putchar('\n'); |
| } |
| |
| #define set_hsc(h, s, c, sector) do \ |
| { \ |
| s = sector % g_sectors + 1; \ |
| sector /= g_sectors; \ |
| h = sector % g_heads; \ |
| sector /= g_heads; \ |
| c = sector & 0xff; \ |
| s |= (sector >> 2) & 0xc0; \ |
| } while (0) |
| |
| static void set_hsc_start_end(struct partition *p, sector_t start, sector_t stop) |
| { |
| if (dos_compatible_flag && (start / (g_sectors * g_heads) > 1023)) |
| start = g_heads * g_sectors * 1024 - 1; |
| set_hsc(p->head, p->sector, p->cyl, start); |
| |
| if (dos_compatible_flag && (stop / (g_sectors * g_heads) > 1023)) |
| stop = g_heads * g_sectors * 1024 - 1; |
| set_hsc(p->end_head, p->end_sector, p->end_cyl, stop); |
| } |
| |
| static void |
| set_partition(int i, int doext, sector_t start, sector_t stop, int sysid) |
| { |
| struct partition *p; |
| sector_t offset; |
| |
| if (doext) { |
| p = ptes[i].ext_pointer; |
| offset = extended_offset; |
| } else { |
| p = ptes[i].part_table; |
| offset = ptes[i].offset_from_dev_start; |
| } |
| p->boot_ind = 0; |
| p->sys_ind = sysid; |
| set_start_sect(p, start - offset); |
| set_nr_sects(p, stop - start + 1); |
| set_hsc_start_end(p, start, stop); |
| ptes[i].changed = 1; |
| } |
| #endif |
| |
| static int |
| warn_geometry(void) |
| { |
| if (g_heads && g_sectors && g_cylinders) |
| return 0; |
| |
| printf("Unknown value(s) for:"); |
| if (!g_heads) |
| printf(" heads"); |
| if (!g_sectors) |
| printf(" sectors"); |
| if (!g_cylinders) |
| printf(" cylinders"); |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| puts(" (settable in the extra functions menu)"); |
| #else |
| bb_putchar('\n'); |
| #endif |
| return 1; |
| } |
| |
| static void |
| update_units(void) |
| { |
| int cyl_units = g_heads * g_sectors; |
| |
| if (display_in_cyl_units && cyl_units) |
| units_per_sector = cyl_units; |
| else |
| units_per_sector = 1; /* in sectors */ |
| } |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| static void |
| warn_cylinders(void) |
| { |
| if (LABEL_IS_DOS && g_cylinders > 1024 && !nowarn) |
| printf("\n" |
| "The number of cylinders for this disk is set to %u.\n" |
| "There is nothing wrong with that, but this is larger than 1024,\n" |
| "and could in certain setups cause problems with:\n" |
| "1) software that runs at boot time (e.g., old versions of LILO)\n" |
| "2) booting and partitioning software from other OSs\n" |
| " (e.g., DOS FDISK, OS/2 FDISK)\n", |
| g_cylinders); |
| } |
| #endif |
| |
| static void |
| read_extended(int ext) |
| { |
| int i; |
| struct pte *pex; |
| struct partition *p, *q; |
| |
| ext_index = ext; |
| pex = &ptes[ext]; |
| pex->ext_pointer = pex->part_table; |
| |
| p = pex->part_table; |
| if (!get_start_sect(p)) { |
| puts("Bad offset in primary extended partition"); |
| return; |
| } |
| |
| while (IS_EXTENDED(p->sys_ind)) { |
| struct pte *pe = &ptes[g_partitions]; |
| |
| if (g_partitions >= MAXIMUM_PARTS) { |
| /* This is not a Linux restriction, but |
| this program uses arrays of size MAXIMUM_PARTS. |
| Do not try to 'improve' this test. */ |
| struct pte *pre = &ptes[g_partitions - 1]; |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| printf("Warning: deleting partitions after %u\n", |
| g_partitions); |
| pre->changed = 1; |
| #endif |
| clear_partition(pre->ext_pointer); |
| return; |
| } |
| |
| read_pte(pe, extended_offset + get_start_sect(p)); |
| |
| if (!extended_offset) |
| extended_offset = get_start_sect(p); |
| |
| q = p = pt_offset(pe->sectorbuffer, 0); |
| for (i = 0; i < 4; i++, p++) if (get_nr_sects(p)) { |
| if (IS_EXTENDED(p->sys_ind)) { |
| if (pe->ext_pointer) |
| printf("Warning: extra link " |
| "pointer in partition table" |
| " %u\n", g_partitions + 1); |
| else |
| pe->ext_pointer = p; |
| } else if (p->sys_ind) { |
| if (pe->part_table) |
| printf("Warning: ignoring extra " |
| "data in partition table" |
| " %u\n", g_partitions + 1); |
| else |
| pe->part_table = p; |
| } |
| } |
| |
| /* very strange code here... */ |
| if (!pe->part_table) { |
| if (q != pe->ext_pointer) |
| pe->part_table = q; |
| else |
| pe->part_table = q + 1; |
| } |
| if (!pe->ext_pointer) { |
| if (q != pe->part_table) |
| pe->ext_pointer = q; |
| else |
| pe->ext_pointer = q + 1; |
| } |
| |
| p = pe->ext_pointer; |
| g_partitions++; |
| } |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| /* remove empty links */ |
| remove: |
| for (i = 4; i < g_partitions; i++) { |
| struct pte *pe = &ptes[i]; |
| |
| if (!get_nr_sects(pe->part_table) |
| && (g_partitions > 5 || ptes[4].part_table->sys_ind) |
| ) { |
| printf("Omitting empty partition (%u)\n", i+1); |
| delete_partition(i); |
| goto remove; /* numbering changed */ |
| } |
| } |
| #endif |
| } |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| static void |
| create_doslabel(void) |
| { |
| printf(msg_building_new_label, "DOS disklabel"); |
| |
| current_label_type = LABEL_DOS; |
| #if ENABLE_FEATURE_OSF_LABEL |
| possibly_osf_label = 0; |
| #endif |
| g_partitions = 4; |
| |
| memset(&MBRbuffer[510 - 4*16], 0, 4*16); |
| write_part_table_flag(MBRbuffer); |
| extended_offset = 0; |
| set_all_unchanged(); |
| set_changed(0); |
| get_boot(CREATE_EMPTY_DOS); |
| } |
| #endif |
| |
| static void |
| get_sectorsize(void) |
| { |
| if (!user_set_sector_size) { |
| int arg; |
| if (ioctl(dev_fd, BLKSSZGET, &arg) == 0) |
| sector_size = arg; |
| if (sector_size != DEFAULT_SECTOR_SIZE) |
| printf("Note: sector size is %u " |
| "(not " DEFAULT_SECTOR_SIZE_STR ")\n", |
| sector_size); |
| } |
| } |
| |
| static void |
| get_kernel_geometry(void) |
| { |
| struct hd_geometry geometry; |
| |
| if (!ioctl(dev_fd, HDIO_GETGEO, &geometry)) { |
| kern_heads = geometry.heads; |
| kern_sectors = geometry.sectors; |
| /* never use geometry.cylinders - it is truncated */ |
| } |
| } |
| |
| static void |
| get_partition_table_geometry(void) |
| { |
| const unsigned char *bufp = (const unsigned char *)MBRbuffer; |
| struct partition *p; |
| int i, h, s, hh, ss; |
| int first = 1; |
| int bad = 0; |
| |
| if (!(valid_part_table_flag((char*)bufp))) |
| return; |
| |
| hh = ss = 0; |
| for (i = 0; i < 4; i++) { |
| p = pt_offset(bufp, i); |
| if (p->sys_ind != 0) { |
| h = p->end_head + 1; |
| s = (p->end_sector & 077); |
| if (first) { |
| hh = h; |
| ss = s; |
| first = 0; |
| } else if (hh != h || ss != s) |
| bad = 1; |
| } |
| } |
| |
| if (!first && !bad) { |
| pt_heads = hh; |
| pt_sectors = ss; |
| } |
| } |
| |
| static void |
| get_geometry(void) |
| { |
| int sec_fac; |
| |
| get_sectorsize(); |
| sec_fac = sector_size / 512; |
| #if ENABLE_FEATURE_SUN_LABEL |
| guess_device_type(); |
| #endif |
| g_heads = g_cylinders = g_sectors = 0; |
| kern_heads = kern_sectors = 0; |
| pt_heads = pt_sectors = 0; |
| |
| get_kernel_geometry(); |
| get_partition_table_geometry(); |
| |
| g_heads = user_heads ? user_heads : |
| pt_heads ? pt_heads : |
| kern_heads ? kern_heads : 255; |
| g_sectors = user_sectors ? user_sectors : |
| pt_sectors ? pt_sectors : |
| kern_sectors ? kern_sectors : 63; |
| total_number_of_sectors = bb_BLKGETSIZE_sectors(dev_fd); |
| |
| sector_offset = 1; |
| if (dos_compatible_flag) |
| sector_offset = g_sectors; |
| |
| g_cylinders = total_number_of_sectors / (g_heads * g_sectors * sec_fac); |
| if (!g_cylinders) |
| g_cylinders = user_cylinders; |
| } |
| |
| /* |
| * Opens disk_device and optionally reads MBR. |
| * If what == OPEN_MAIN: |
| * Open device, read MBR. Abort program on short read. Create empty |
| * disklabel if the on-disk structure is invalid (WRITABLE mode). |
| * If what == TRY_ONLY: |
| * Open device, read MBR. Return an error if anything is out of place. |
| * Do not create an empty disklabel. This is used for the "list" |
| * operations: "fdisk -l /dev/sda" and "fdisk -l" (all devices). |
| * If what == CREATE_EMPTY_*: |
| * This means that get_boot() was called recursively from create_*label(). |
| * Do not re-open the device; just set up the ptes array and print |
| * geometry warnings. |
| * |
| * Returns: |
| * -1: no 0xaa55 flag present (possibly entire disk BSD) |
| * 0: found or created label |
| * 1: I/O error |
| */ |
| #if ENABLE_FEATURE_SUN_LABEL || ENABLE_FEATURE_FDISK_WRITABLE |
| static int get_boot(enum action what) |
| #else |
| static int get_boot(void) |
| #define get_boot(what) get_boot() |
| #endif |
| { |
| int i, fd; |
| |
| g_partitions = 4; |
| for (i = 0; i < 4; i++) { |
| struct pte *pe = &ptes[i]; |
| pe->part_table = pt_offset(MBRbuffer, i); |
| pe->ext_pointer = NULL; |
| pe->offset_from_dev_start = 0; |
| pe->sectorbuffer = MBRbuffer; |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| pe->changed = (what == CREATE_EMPTY_DOS); |
| #endif |
| } |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| // ALERT! highly idiotic design! |
| // We end up here when we call get_boot() recursively |
| // via get_boot() [table is bad] -> create_doslabel() -> get_boot(CREATE_EMPTY_DOS). |
| // or get_boot() [table is bad] -> create_sunlabel() -> get_boot(CREATE_EMPTY_SUN). |
| // (just factor out re-init of ptes[0,1,2,3] in a separate fn instead?) |
| // So skip opening device _again_... |
| if (what == CREATE_EMPTY_DOS IF_FEATURE_SUN_LABEL(|| what == CREATE_EMPTY_SUN)) |
| goto created_table; |
| |
| fd = open(disk_device, (option_mask32 & OPT_l) ? O_RDONLY : O_RDWR); |
| |
| if (fd < 0) { |
| fd = open(disk_device, O_RDONLY); |
| if (fd < 0) { |
| if (what == TRY_ONLY) |
| return 1; |
| fdisk_fatal(unable_to_open); |
| } |
| printf("'%s' is opened for read only\n", disk_device); |
| } |
| xmove_fd(fd, dev_fd); |
| if (512 != full_read(dev_fd, MBRbuffer, 512)) { |
| if (what == TRY_ONLY) { |
| close_dev_fd(); |
| return 1; |
| } |
| fdisk_fatal(unable_to_read); |
| } |
| #else |
| fd = open(disk_device, O_RDONLY); |
| if (fd < 0) |
| return 1; |
| if (512 != full_read(fd, MBRbuffer, 512)) { |
| close(fd); |
| return 1; |
| } |
| xmove_fd(fd, dev_fd); |
| #endif |
| |
| get_geometry(); |
| update_units(); |
| |
| #if ENABLE_FEATURE_SUN_LABEL |
| if (check_sun_label()) |
| return 0; |
| #endif |
| #if ENABLE_FEATURE_SGI_LABEL |
| if (check_sgi_label()) |
| return 0; |
| #endif |
| #if ENABLE_FEATURE_AIX_LABEL |
| if (check_aix_label()) |
| return 0; |
| #endif |
| #if ENABLE_FEATURE_GPT_LABEL |
| if (check_gpt_label()) |
| return 0; |
| #endif |
| #if ENABLE_FEATURE_OSF_LABEL |
| if (check_osf_label()) { |
| possibly_osf_label = 1; |
| if (!valid_part_table_flag(MBRbuffer)) { |
| current_label_type = LABEL_OSF; |
| return 0; |
| } |
| puts("This disk has both DOS and BSD magic.\n" |
| "Give the 'b' command to go to BSD mode."); |
| } |
| #endif |
| |
| #if !ENABLE_FEATURE_FDISK_WRITABLE |
| if (!valid_part_table_flag(MBRbuffer)) |
| return -1; |
| #else |
| if (!valid_part_table_flag(MBRbuffer)) { |
| if (what == OPEN_MAIN) { |
| puts("Device contains neither a valid DOS " |
| "partition table, nor Sun, SGI, OSF or GPT " |
| "disklabel"); |
| #ifdef __sparc__ |
| IF_FEATURE_SUN_LABEL(create_sunlabel();) |
| #else |
| create_doslabel(); |
| #endif |
| return 0; |
| } |
| /* TRY_ONLY: */ |
| return -1; |
| } |
| created_table: |
| #endif /* FEATURE_FDISK_WRITABLE */ |
| |
| |
| IF_FEATURE_FDISK_WRITABLE(warn_cylinders();) |
| warn_geometry(); |
| |
| for (i = 0; i < 4; i++) { |
| if (IS_EXTENDED(ptes[i].part_table->sys_ind)) { |
| if (g_partitions != 4) |
| printf("Ignoring extra extended " |
| "partition %u\n", i + 1); |
| else |
| read_extended(i); |
| } |
| } |
| |
| for (i = 3; i < g_partitions; i++) { |
| struct pte *pe = &ptes[i]; |
| if (!valid_part_table_flag(pe->sectorbuffer)) { |
| printf("Warning: invalid flag 0x%02x,0x%02x of partition " |
| "table %u will be corrected by w(rite)\n", |
| pe->sectorbuffer[510], |
| pe->sectorbuffer[511], |
| i + 1); |
| IF_FEATURE_FDISK_WRITABLE(pe->changed = 1;) |
| } |
| } |
| |
| return 0; |
| } |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| /* |
| * Print the message MESG, then read an integer between LOW and HIGH (inclusive). |
| * If the user hits Enter, DFLT is returned. |
| * Answers like +10 are interpreted as offsets from BASE. |
| * |
| * There is no default if DFLT is not between LOW and HIGH. |
| */ |
| static sector_t |
| read_int(sector_t low, sector_t dflt, sector_t high, sector_t base, const char *mesg) |
| { |
| sector_t value; |
| int default_ok = 1; |
| const char *fmt = "%s (%u-%u, default %u): "; |
| |
| if (dflt < low || dflt > high) { |
| fmt = "%s (%u-%u): "; |
| default_ok = 0; |
| } |
| |
| while (1) { |
| int use_default = default_ok; |
| |
| /* ask question and read answer */ |
| do { |
| printf(fmt, mesg, low, high, dflt); |
| read_maybe_empty(""); |
| } while (*line_ptr != '\n' && !isdigit(*line_ptr) |
| && *line_ptr != '-' && *line_ptr != '+'); |
| |
| if (*line_ptr == '+' || *line_ptr == '-') { |
| int minus = (*line_ptr == '-'); |
| unsigned scale_shift; |
| |
| if (sizeof(value) <= sizeof(long)) |
| value = strtoul(line_ptr + 1, NULL, 10); |
| else |
| value = strtoull(line_ptr + 1, NULL, 10); |
| |
| /* (1) if 2nd char is digit, use_default = 0. |
| * (2) move line_ptr to first non-digit. |
| */ |
| while (isdigit(*++line_ptr)) |
| use_default = 0; |
| |
| scale_shift = 0; |
| switch (*line_ptr | 0x20) { |
| case 'k': |
| scale_shift = 10; /* 1024 */ |
| break; |
| /* |
| * fdisk from util-linux 2.31 seems to round '+NNNk' and '+NNNK' to megabytes, |
| * (512-byte) sector count of the partition does not equal NNN*2: |
| * |
| * Last sector, +sectors or +size{K,M,G,T,P} (1953792-1000215215, default 1000215215): +9727k |
| * Device Boot Start End Sectors Size Id Type |
| * /dev/sdaN 1953792 1972223 18432 9M 83 Linux <-- size exactly 9*1024*1024 bytes |
| * |
| * Last sector, +sectors or +size{K,M,G,T,P} (1953792-1000215215, default 1000215215): +9728k |
| * /dev/sdaN 1953792 1974271 20480 10M 83 Linux <-- size exactly 10*1024*1024 bytes |
| * |
| * If 'k' means 1000 bytes (not 1024), then 9728k = 9728*1000 = 9500*1024, |
| * exactly halfway from 9000 to 10000, which explains why it jumps to next mbyte |
| * at this value. |
| * |
| * 'm' does not seem to behave this way: it means 1024*1024 bytes. |
| * |
| * Not sure we want to copy this. If user says he wants 1234kbyte partition, |
| * we do _exactly that_: 1234kbytes = 2468 sectors. |
| */ |
| case 'm': |
| scale_shift = 20; /* 1024*1024 */ |
| break; |
| case 'g': |
| scale_shift = 30; /* 1024*1024*1024 */ |
| break; |
| case 't': |
| scale_shift = 40; /* 1024*1024*1024*1024 */ |
| break; |
| default: |
| break; |
| } |
| if (scale_shift) { |
| ullong bytes; |
| unsigned long unit; |
| |
| bytes = (ullong) value << scale_shift; |
| unit = sector_size * units_per_sector; |
| bytes += unit/2; /* round */ |
| bytes /= unit; |
| value = (bytes != 0 ? bytes - 1 : 0); |
| } |
| if (minus) |
| value = -value; |
| value += base; |
| } else { |
| if (sizeof(value) <= sizeof(long)) |
| value = strtoul(line_ptr, NULL, 10); |
| else |
| value = strtoull(line_ptr, NULL, 10); |
| while (isdigit(*line_ptr)) { |
| line_ptr++; |
| use_default = 0; |
| } |
| } |
| if (use_default) { |
| value = dflt; |
| printf("Using default value %u\n", value); |
| } |
| if (value >= low && value <= high) |
| break; |
| puts("Value is out of range"); |
| } |
| return value; |
| } |
| |
| static unsigned |
| get_partition(int warn, unsigned max) |
| { |
| struct pte *pe; |
| unsigned i; |
| |
| i = read_int(1, 0, max, 0, "Partition number") - 1; |
| pe = &ptes[i]; |
| |
| if (warn) { |
| if ((!LABEL_IS_SUN && !LABEL_IS_SGI && !pe->part_table->sys_ind) |
| || (LABEL_IS_SUN && (!sunlabel->partitions[i].num_sectors || !sunlabel->infos[i].id)) |
| || (LABEL_IS_SGI && !sgi_get_num_sectors(i)) |
| ) { |
| printf("Warning: partition %u has empty type\n", i+1); |
| } |
| } |
| return i; |
| } |
| |
| static int |
| get_existing_partition(int warn, unsigned max) |
| { |
| int pno = -1; |
| unsigned i; |
| |
| for (i = 0; i < max; i++) { |
| struct pte *pe = &ptes[i]; |
| struct partition *p = pe->part_table; |
| |
| if (p && !is_cleared_partition(p)) { |
| if (pno >= 0) |
| goto not_unique; |
| pno = i; |
| } |
| } |
| if (pno >= 0) { |
| printf("Selected partition %u\n", pno+1); |
| return pno; |
| } |
| puts("No partition is defined yet!"); |
| return -1; |
| |
| not_unique: |
| return get_partition(warn, max); |
| } |
| |
| static int |
| get_nonexisting_partition(void) |
| { |
| const int max = 4; |
| int pno = -1; |
| unsigned i; |
| |
| for (i = 0; i < max; i++) { |
| struct pte *pe = &ptes[i]; |
| struct partition *p = pe->part_table; |
| |
| if (p && is_cleared_partition(p)) { |
| if (pno >= 0) |
| goto not_unique; |
| pno = i; |
| } |
| } |
| if (pno >= 0) { |
| printf("Selected partition %u\n", pno+1); |
| return pno; |
| } |
| puts("All primary partitions have been defined already!"); |
| return -1; |
| |
| not_unique: |
| return get_partition(/*warn*/ 0, max); |
| } |
| |
| |
| static void |
| change_units(void) |
| { |
| display_in_cyl_units = !display_in_cyl_units; |
| update_units(); |
| printf("Changing display/entry units to %s\n", |
| str_units(PLURAL)); |
| } |
| |
| static void |
| toggle_active(int i) |
| { |
| struct pte *pe = &ptes[i]; |
| struct partition *p = pe->part_table; |
| |
| if (IS_EXTENDED(p->sys_ind) && !p->boot_ind) |
| printf("WARNING: Partition %u is an extended partition\n", i + 1); |
| p->boot_ind = (p->boot_ind ? 0 : ACTIVE_FLAG); |
| pe->changed = 1; |
| } |
| |
| static void |
| toggle_dos_compatibility_flag(void) |
| { |
| dos_compatible_flag = 1 - dos_compatible_flag; |
| if (dos_compatible_flag) { |
| sector_offset = g_sectors; |
| printf("DOS Compatibility flag is %sset\n", ""); |
| } else { |
| sector_offset = 1; |
| printf("DOS Compatibility flag is %sset\n", "not "); |
| } |
| } |
| |
| static void |
| delete_partition(int i) |
| { |
| struct pte *pe = &ptes[i]; |
| struct partition *p = pe->part_table; |
| struct partition *q = pe->ext_pointer; |
| |
| /* Note that for the fifth partition (i == 4) we don't actually |
| * decrement partitions. |
| */ |
| |
| if (warn_geometry()) |
| return; /* C/H/S not set */ |
| pe->changed = 1; |
| |
| if (LABEL_IS_SUN) { |
| sun_delete_partition(i); |
| return; |
| } |
| if (LABEL_IS_SGI) { |
| sgi_delete_partition(i); |
| return; |
| } |
| |
| if (i < 4) { |
| if (IS_EXTENDED(p->sys_ind) && i == ext_index) { |
| g_partitions = 4; |
| ptes[ext_index].ext_pointer = NULL; |
| extended_offset = 0; |
| } |
| clear_partition(p); |
| return; |
| } |
| |
| if (!q->sys_ind && i > 4) { |
| /* the last one in the chain - just delete */ |
| --g_partitions; |
| --i; |
| clear_partition(ptes[i].ext_pointer); |
| ptes[i].changed = 1; |
| } else { |
| /* not the last one - further ones will be moved down */ |
| if (i > 4) { |
| /* delete this link in the chain */ |
| p = ptes[i-1].ext_pointer; |
| *p = *q; |
| set_start_sect(p, get_start_sect(q)); |
| set_nr_sects(p, get_nr_sects(q)); |
| ptes[i-1].changed = 1; |
| } else if (g_partitions > 5) { /* 5 will be moved to 4 */ |
| /* the first logical in a longer chain */ |
| pe = &ptes[5]; |
| |
| if (pe->part_table) /* prevent SEGFAULT */ |
| set_start_sect(pe->part_table, |
| get_partition_start_from_dev_start(pe) - |
| extended_offset); |
| pe->offset_from_dev_start = extended_offset; |
| pe->changed = 1; |
| } |
| |
| if (g_partitions > 5) { |
| g_partitions--; |
| while (i < g_partitions) { |
| ptes[i] = ptes[i+1]; |
| i++; |
| } |
| } else { |
| /* the only logical: clear only */ |
| clear_partition(ptes[i].part_table); |
| } |
| } |
| } |
| |
| static void |
| change_sysid(void) |
| { |
| int i, sys, origsys; |
| struct partition *p; |
| |
| /* If sgi_label then don't use get_existing_partition, |
| let the user select a partition, since get_existing_partition() |
| only works for Linux like partition tables. */ |
| if (!LABEL_IS_SGI) { |
| i = get_existing_partition(0, g_partitions); |
| } else { |
| i = get_partition(0, g_partitions); |
| } |
| if (i == -1) |
| return; |
| p = ptes[i].part_table; |
| origsys = sys = get_sysid(i); |
| |
| /* if changing types T to 0 is allowed, then |
| the reverse change must be allowed, too */ |
| if (!sys && !LABEL_IS_SGI && !LABEL_IS_SUN && !get_nr_sects(p)) { |
| printf("Partition %u does not exist yet!\n", i + 1); |
| return; |
| } |
| while (1) { |
| sys = read_hex(get_sys_types()); |
| |
| if (!sys && !LABEL_IS_SGI && !LABEL_IS_SUN) { |
| puts("Type 0 means free space to many systems\n" |
| "(but not to Linux). Having partitions of\n" |
| "type 0 is probably unwise."); |
| /* break; */ |
| } |
| |
| if (!LABEL_IS_SUN && !LABEL_IS_SGI) { |
| if (IS_EXTENDED(sys) != IS_EXTENDED(p->sys_ind)) { |
| puts("You cannot change a partition into" |
| " an extended one or vice versa"); |
| break; |
| } |
| } |
| |
| if (sys < 256) { |
| #if ENABLE_FEATURE_SUN_LABEL |
| if (LABEL_IS_SUN && i == 2 && sys != SUN_WHOLE_DISK) |
| puts("Consider leaving partition 3 " |
| "as Whole disk (5),\n" |
| "as SunOS/Solaris expects it and " |
| "even Linux likes it\n"); |
| #endif |
| #if ENABLE_FEATURE_SGI_LABEL |
| if (LABEL_IS_SGI && |
| ( |
| (i == 10 && sys != SGI_ENTIRE_DISK) || |
| (i == 8 && sys != 0) |
| ) |
| ) { |
| puts("Consider leaving partition 9 " |
| "as volume header (0),\nand " |
| "partition 11 as entire volume (6)" |
| "as IRIX expects it\n"); |
| } |
| #endif |
| if (sys == origsys) |
| break; |
| if (LABEL_IS_SUN) { |
| sun_change_sysid(i, sys); |
| } else if (LABEL_IS_SGI) { |
| sgi_change_sysid(i, sys); |
| } else |
| p->sys_ind = sys; |
| |
| printf("Changed system type of partition %u " |
| "to %x (%s)\n", i + 1, sys, |
| partition_type(sys)); |
| ptes[i].changed = 1; |
| //if (is_dos_partition(origsys) || is_dos_partition(sys)) |
| // dos_changed = 1; |
| break; |
| } |
| } |
| } |
| #endif /* FEATURE_FDISK_WRITABLE */ |
| |
| |
| /* check_consistency() and linear2chs() added Sat Mar 6 12:28:16 1993, |
| * faith@cs.unc.edu, based on code fragments from pfdisk by Gordon W. Ross, |
| * Jan. 1990 (version 1.2.1 by Gordon W. Ross Aug. 1990; Modified by S. |
| * Lubkin Oct. 1991). */ |
| |
| static void |
| linear2chs(unsigned ls, unsigned *c, unsigned *h, unsigned *s) |
| { |
| int spc = g_heads * g_sectors; |
| |
| *c = ls / spc; |
| ls = ls % spc; |
| *h = ls / g_sectors; |
| *s = ls % g_sectors + 1; /* sectors count from 1 */ |
| } |
| |
| static void |
| check_consistency(const struct partition *p, int partition) |
| { |
| unsigned pbc, pbh, pbs; /* physical beginning c, h, s */ |
| unsigned pec, peh, pes; /* physical ending c, h, s */ |
| unsigned lbc, lbh, lbs; /* logical beginning c, h, s */ |
| unsigned lec, leh, les; /* logical ending c, h, s */ |
| |
| if (!g_heads || !g_sectors || (partition >= 4)) |
| return; /* do not check extended partitions */ |
| |
| /* physical beginning c, h, s */ |
| pbc = cylinder(p->sector, p->cyl); |
| pbh = p->head; |
| pbs = sector(p->sector); |
| |
| /* physical ending c, h, s */ |
| pec = cylinder(p->end_sector, p->end_cyl); |
| peh = p->end_head; |
| pes = sector(p->end_sector); |
| |
| /* compute logical beginning (c, h, s) */ |
| linear2chs(get_start_sect(p), &lbc, &lbh, &lbs); |
| |
| /* compute logical ending (c, h, s) */ |
| linear2chs(get_start_sect(p) + get_nr_sects(p) - 1, &lec, &leh, &les); |
| |
| /* Same physical / logical beginning? */ |
| if (g_cylinders <= 1024 && (pbc != lbc || pbh != lbh || pbs != lbs)) { |
| printf("Partition %u has different physical/logical " |
| "start (non-Linux?):\n", partition + 1); |
| printf(" phys=(%u,%u,%u) ", pbc, pbh, pbs); |
| printf("logical=(%u,%u,%u)\n", lbc, lbh, lbs); |
| } |
| |
| /* Same physical / logical ending? */ |
| if (g_cylinders <= 1024 && (pec != lec || peh != leh || pes != les)) { |
| printf("Partition %u has different physical/logical " |
| "end:\n", partition + 1); |
| printf(" phys=(%u,%u,%u) ", pec, peh, pes); |
| printf("logical=(%u,%u,%u)\n", lec, leh, les); |
| } |
| } |
| |
| static void |
| list_disk_geometry(void) |
| { |
| ullong bytes = ((ullong)total_number_of_sectors << 9); |
| ullong xbytes = bytes / (1024*1024); |
| char x = 'M'; |
| |
| if (xbytes >= 10000) { |
| xbytes += 512; /* fdisk util-linux 2.28 does this */ |
| xbytes /= 1024; |
| x = 'G'; |
| } |
| printf("Disk %s: %llu %cB, %llu bytes, %"SECT_FMT"u sectors\n" |
| "%u cylinders, %u heads, %u sectors/track\n" |
| "Units: %s of %u * %u = %u bytes\n\n", |
| disk_device, xbytes, x, |
| bytes, total_number_of_sectors, |
| g_cylinders, g_heads, g_sectors, |
| str_units(PLURAL), |
| units_per_sector, sector_size, units_per_sector * sector_size |
| ); |
| } |
| |
| /* |
| * Check whether partition entries are ordered by their starting positions. |
| * Return 0 if OK. Return i if partition i should have been earlier. |
| * Two separate checks: primary and logical partitions. |
| */ |
| static int |
| wrong_p_order(int *prev) |
| { |
| const struct pte *pe; |
| const struct partition *p; |
| sector_t last_p_start_pos = 0, p_start_pos; |
| unsigned i, last_i = 0; |
| |
| for (i = 0; i < g_partitions; i++) { |
| if (i == 4) { |
| last_i = 4; |
| last_p_start_pos = 0; |
| } |
| pe = &ptes[i]; |
| p = pe->part_table; |
| if (p->sys_ind) { |
| p_start_pos = get_partition_start_from_dev_start(pe); |
| |
| if (last_p_start_pos > p_start_pos) { |
| if (prev) |
| *prev = last_i; |
| return i; |
| } |
| |
| last_p_start_pos = p_start_pos; |
| last_i = i; |
| } |
| } |
| return 0; |
| } |
| |
| #if ENABLE_FEATURE_FDISK_ADVANCED |
| /* |
| * Fix the chain of logicals. |
| * extended_offset is unchanged, the set of sectors used is unchanged |
| * The chain is sorted so that sectors increase, and so that |
| * starting sectors increase. |
| * |
| * After this it may still be that cfdisk doesnt like the table. |
| * (This is because cfdisk considers expanded parts, from link to |
| * end of partition, and these may still overlap.) |
| * Now |
| * sfdisk /dev/hda > ohda; sfdisk /dev/hda < ohda |
| * may help. |
| */ |
| static void |
| fix_chain_of_logicals(void) |
| { |
| int j, oj, ojj, sj, sjj; |
| struct partition *pj,*pjj,tmp; |
| |
| /* Stage 1: sort sectors but leave sector of part 4 */ |
| /* (Its sector is the global extended_offset.) */ |
| stage1: |
| for (j = 5; j < g_partitions - 1; j++) { |
| oj = ptes[j].offset_from_dev_start; |
| ojj = ptes[j+1].offset_from_dev_start; |
| if (oj > ojj) { |
| ptes[j].offset_from_dev_start = ojj; |
| ptes[j+1].offset_from_dev_start = oj; |
| pj = ptes[j].part_table; |
| set_start_sect(pj, get_start_sect(pj)+oj-ojj); |
| pjj = ptes[j+1].part_table; |
| set_start_sect(pjj, get_start_sect(pjj)+ojj-oj); |
| set_start_sect(ptes[j-1].ext_pointer, |
| ojj-extended_offset); |
| set_start_sect(ptes[j].ext_pointer, |
| oj-extended_offset); |
| goto stage1; |
| } |
| } |
| |
| /* Stage 2: sort starting sectors */ |
| stage2: |
| for (j = 4; j < g_partitions - 1; j++) { |
| pj = ptes[j].part_table; |
| pjj = ptes[j+1].part_table; |
| sj = get_start_sect(pj); |
| sjj = get_start_sect(pjj); |
| oj = ptes[j].offset_from_dev_start; |
| ojj = ptes[j+1].offset_from_dev_start; |
| if (oj+sj > ojj+sjj) { |
| tmp = *pj; |
| *pj = *pjj; |
| *pjj = tmp; |
| set_start_sect(pj, ojj+sjj-oj); |
| set_start_sect(pjj, oj+sj-ojj); |
| goto stage2; |
| } |
| } |
| |
| /* Probably something was changed */ |
| for (j = 4; j < g_partitions; j++) |
| ptes[j].changed = 1; |
| } |
| |
| |
| static void |
| fix_partition_table_order(void) |
| { |
| struct pte *pei, *pek; |
| int i,k; |
| |
| if (!wrong_p_order(NULL)) { |
| puts("Ordering is already correct\n"); |
| return; |
| } |
| |
| while ((i = wrong_p_order(&k)) != 0 && i < 4) { |
| /* partition i should have come earlier, move it */ |
| /* We have to move data in the MBR */ |
| struct partition *pi, *pk, *pe, pbuf; |
| pei = &ptes[i]; |
| pek = &ptes[k]; |
| |
| pe = pei->ext_pointer; |
| pei->ext_pointer = pek->ext_pointer; |
| pek->ext_pointer = pe; |
| |
| pi = pei->part_table; |
| pk = pek->part_table; |
| |
| memmove(&pbuf, pi, sizeof(struct partition)); |
| memmove(pi, pk, sizeof(struct partition)); |
| memmove(pk, &pbuf, sizeof(struct partition)); |
| |
| pei->changed = pek->changed = 1; |
| } |
| |
| if (i) |
| fix_chain_of_logicals(); |
| |
| puts("Done"); |
| } |
| #endif |
| |
| static const char * |
| chs_string11(unsigned cyl, unsigned head, unsigned sect) |
| { |
| char *buf = auto_string(xzalloc(sizeof(int)*3 * 3)); |
| sprintf(buf, "%u,%u,%u", cylinder(sect,cyl), head, sector(sect)); |
| return buf; |
| } |
| |
| static void |
| list_table(int xtra) |
| { |
| int i, w; |
| |
| if (LABEL_IS_SUN) { |
| sun_list_table(xtra); |
| return; |
| } |
| if (LABEL_IS_SGI) { |
| sgi_list_table(xtra); |
| return; |
| } |
| if (LABEL_IS_GPT) { |
| gpt_list_table(xtra); |
| return; |
| } |
| |
| list_disk_geometry(); |
| |
| if (LABEL_IS_OSF) { |
| xbsd_print_disklabel(xtra); |
| return; |
| } |
| |
| /* Heuristic: we list partition 3 of /dev/foo as /dev/foo3, |
| * but if the device name ends in a digit, say /dev/foo1, |
| * then the partition is called /dev/foo1p3. |
| */ |
| w = strlen(disk_device); |
| if (w && isdigit(disk_device[w-1])) |
| w++; |
| if (w < 7) |
| w = 7; |
| |
| printf("%-*s Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type\n", |
| w-1, "Device"); |
| |
| for (i = 0; i < g_partitions; i++) { |
| const struct partition *p; |
| const struct pte *pe = &ptes[i]; |
| char boot4[4]; |
| char numstr6[6]; |
| sector_t start_sect; |
| sector_t end_sect; |
| sector_t nr_sects; |
| |
| p = pe->part_table; |
| if (!p || is_cleared_partition(p)) |
| continue; |
| |
| sprintf(boot4, "%02x", p->boot_ind); |
| if ((p->boot_ind & 0x7f) == 0) { |
| /* 0x80 shown as '*', 0x00 is ' ' */ |
| boot4[0] = p->boot_ind ? '*' : ' '; |
| boot4[1] = ' '; |
| } |
| |
| start_sect = get_partition_start_from_dev_start(pe); |
| end_sect = start_sect; |
| nr_sects = get_nr_sects(p); |
| if (nr_sects != 0) |
| end_sect += nr_sects - 1; |
| |
| smart_ulltoa5((ullong)nr_sects * sector_size, |
| numstr6, " KMGTPEZY")[0] = '\0'; |
| |
| #define SFMT SECT_FMT |
| // Boot StartCHS EndCHS StartLBA EndLBA Sectors Size Id Type |
| printf("%s%s %-11s"/**/" %-11s"/**/" %10"SFMT"u %10"SFMT"u %10"SFMT"u %s %2x %s\n", |
| partname(disk_device, i+1, w+2), |
| boot4, |
| chs_string11(p->cyl, p->head, p->sector), |
| chs_string11(p->end_cyl, p->end_head, p->end_sector), |
| start_sect, |
| end_sect, |
| nr_sects, |
| numstr6, |
| p->sys_ind, |
| partition_type(p->sys_ind) |
| ); |
| #undef SFMT |
| check_consistency(p, i); |
| } |
| |
| /* Is partition table in disk order? It need not be, but... */ |
| /* partition table entries are not checked for correct order |
| * if this is a sgi, sun or aix labeled disk... */ |
| if (LABEL_IS_DOS && wrong_p_order(NULL)) { |
| /* FIXME */ |
| puts("\nPartition table entries are not in disk order"); |
| } |
| } |
| |
| #if ENABLE_FEATURE_FDISK_ADVANCED |
| static void |
| x_list_table(int extend) |
| { |
| const struct pte *pe; |
| const struct partition *p; |
| int i; |
| |
| printf("\nDisk %s: %u heads, %u sectors, %u cylinders\n\n", |
| disk_device, g_heads, g_sectors, g_cylinders); |
| puts("Nr AF Hd Sec Cyl Hd Sec Cyl Start Size ID"); |
| for (i = 0; i < g_partitions; i++) { |
| pe = &ptes[i]; |
| p = (extend ? pe->ext_pointer : pe->part_table); |
| if (p != NULL) { |
| printf("%2u %02x%4u%4u%5u%4u%4u%5u%11"SECT_FMT"u%11"SECT_FMT"u %02x\n", |
| i + 1, p->boot_ind, |
| p->head, |
| sector(p->sector), |
| cylinder(p->sector, p->cyl), |
| p->end_head, |
| sector(p->end_sector), |
| cylinder(p->end_sector, p->end_cyl), |
| get_start_sect(p), |
| get_nr_sects(p), |
| p->sys_ind |
| ); |
| if (p->sys_ind) |
| check_consistency(p, i); |
| } |
| } |
| } |
| #endif |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| static void |
| fill_bounds(sector_t *first, sector_t *last) |
| { |
| unsigned i; |
| const struct pte *pe = &ptes[0]; |
| const struct partition *p; |
| |
| for (i = 0; i < g_partitions; pe++,i++) { |
| p = pe->part_table; |
| if (!p->sys_ind || IS_EXTENDED(p->sys_ind)) { |
| first[i] = 0xffffffff; |
| last[i] = 0; |
| } else { |
| first[i] = get_partition_start_from_dev_start(pe); |
| last[i] = first[i] + get_nr_sects(p) - 1; |
| } |
| } |
| } |
| |
| static void |
| check(int n, unsigned h, unsigned s, unsigned c, sector_t start) |
| { |
| sector_t total, real_s, real_c; |
| |
| real_s = sector(s) - 1; |
| real_c = cylinder(s, c); |
| total = (real_c * g_sectors + real_s) * g_heads + h; |
| if (!total) |
| printf("Partition %u contains sector 0\n", n); |
| if (h >= g_heads) |
| printf("Partition %u: head %u greater than maximum %u\n", |
| n, h + 1, g_heads); |
| if (real_s >= g_sectors) |
| printf("Partition %u: sector %u greater than " |
| "maximum %u\n", n, s, g_sectors); |
| if (real_c >= g_cylinders) |
| printf("Partition %u: cylinder %"SECT_FMT"u greater than " |
| "maximum %u\n", n, real_c + 1, g_cylinders); |
| if (g_cylinders <= 1024 && start != total) |
| printf("Partition %u: previous sectors %"SECT_FMT"u disagrees with " |
| "total %"SECT_FMT"u\n", n, start, total); |
| } |
| |
| static void |
| verify(void) |
| { |
| int i, j; |
| sector_t total = 1; |
| sector_t chs_size; |
| sector_t first[g_partitions], last[g_partitions]; |
| struct partition *p; |
| |
| if (warn_geometry()) |
| return; |
| |
| if (LABEL_IS_SUN) { |
| verify_sun(); |
| return; |
| } |
| if (LABEL_IS_SGI) { |
| verify_sgi(1); |
| return; |
| } |
| |
| fill_bounds(first, last); |
| for (i = 0; i < g_partitions; i++) { |
| struct pte *pe = &ptes[i]; |
| |
| p = pe->part_table; |
| if (p->sys_ind && !IS_EXTENDED(p->sys_ind)) { |
| check_consistency(p, i); |
| if (get_partition_start_from_dev_start(pe) < first[i]) |
| printf("Warning: bad start-of-data in " |
| "partition %u\n", i + 1); |
| check(i + 1, p->end_head, p->end_sector, p->end_cyl, |
| last[i]); |
| total += last[i] + 1 - first[i]; |
| for (j = 0; j < i; j++) { |
| if ((first[i] >= first[j] && first[i] <= last[j]) |
| || ((last[i] <= last[j] && last[i] >= first[j]))) { |
| printf("Warning: partition %u overlaps " |
| "partition %u\n", j + 1, i + 1); |
| total += first[i] >= first[j] ? |
| first[i] : first[j]; |
| total -= last[i] <= last[j] ? |
| last[i] : last[j]; |
| } |
| } |
| } |
| } |
| |
| if (extended_offset) { |
| struct pte *pex = &ptes[ext_index]; |
| sector_t e_last = get_start_sect(pex->part_table) + |
| get_nr_sects(pex->part_table) - 1; |
| |
| for (i = 4; i < g_partitions; i++) { |
| total++; |
| p = ptes[i].part_table; |
| if (!p->sys_ind) { |
| if (i != 4 || i + 1 < g_partitions) |
| printf("Warning: partition %u " |
| "is empty\n", i + 1); |
| } else if (first[i] < extended_offset || last[i] > e_last) { |
| printf("Logical partition %u not entirely in " |
| "partition %u\n", i + 1, ext_index + 1); |
| } |
| } |
| } |
| |
| chs_size = (sector_t)g_heads * g_sectors * g_cylinders; |
| if (total > chs_size) |
| printf("Total allocated sectors %u" |
| " greater than CHS size %"SECT_FMT"u\n", |
| total, chs_size |
| ); |
| else { |
| total = chs_size - total; |
| if (total != 0) |
| printf("%"SECT_FMT"u unallocated sectors\n", total); |
| } |
| } |
| |
| static void |
| add_partition(int n, int sys) |
| { |
| char mesg[256]; /* 48 does not suffice in Japanese */ |
| int i, num_read = 0; |
| struct partition *p = ptes[n].part_table; |
| struct partition *q = ptes[ext_index].part_table; |
| sector_t limit, temp; |
| sector_t start, stop = 0; |
| sector_t first[g_partitions], last[g_partitions]; |
| |
| if (p && p->sys_ind) { |
| printf(msg_part_already_defined, n + 1); |
| return; |
| } |
| fill_bounds(first, last); |
| if (n < 4) { |
| start = sector_offset; |
| if (display_in_cyl_units || !total_number_of_sectors) |
| limit = (sector_t) g_heads * g_sectors * g_cylinders - 1; |
| else |
| limit = total_number_of_sectors - 1; |
| if (extended_offset) { |
| first[ext_index] = extended_offset; |
| last[ext_index] = get_start_sect(q) + |
| get_nr_sects(q) - 1; |
| } |
| } else { |
| start = extended_offset + sector_offset; |
| limit = get_start_sect(q) + get_nr_sects(q) - 1; |
| } |
| if (display_in_cyl_units) |
| for (i = 0; i < g_partitions; i++) |
| first[i] = (cround(first[i]) - 1) * units_per_sector; |
| |
| snprintf(mesg, sizeof(mesg), "First %s", str_units(SINGULAR)); |
| do { |
| temp = start; |
| for (i = 0; i < g_partitions; i++) { |
| int lastplusoff; |
| |
| if (start == ptes[i].offset_from_dev_start) |
| start += sector_offset; |
| lastplusoff = last[i] + ((n < 4) ? 0 : sector_offset); |
| if (start >= first[i] && start <= lastplusoff) |
| start = lastplusoff + 1; |
| } |
| if (start > limit) |
| break; |
| if (start >= temp+units_per_sector && num_read) { |
| printf("Sector %"SECT_FMT"u is already allocated\n", temp); |
| temp = start; |
| num_read = 0; |
| } |
| if (!num_read && start == temp) { |
| sector_t saved_start; |
| |
| saved_start = start; |
| start = read_int(cround(saved_start), cround(saved_start), cround(limit), 0, mesg); |
| if (display_in_cyl_units) { |
| start = (start - 1) * units_per_sector; |
| if (start < saved_start) |
| start = saved_start; |
| } |
| num_read = 1; |
| } |
| } while (start != temp || !num_read); |
| if (n > 4) { /* NOT for fifth partition */ |
| struct pte *pe = &ptes[n]; |
| |
| pe->offset_from_dev_start = start - sector_offset; |
| if (pe->offset_from_dev_start == extended_offset) { /* must be corrected */ |
| pe->offset_from_dev_start++; |
| if (sector_offset == 1) |
| start++; |
| } |
| } |
| |
| for (i = 0; i < g_partitions; i++) { |
| struct pte *pe = &ptes[i]; |
| |
| if (start < pe->offset_from_dev_start && limit >= pe->offset_from_dev_start) |
| limit = pe->offset_from_dev_start - 1; |
| if (start < first[i] && limit >= first[i]) |
| limit = first[i] - 1; |
| } |
| if (start > limit) { |
| puts("No free sectors available"); |
| if (n > 4) |
| g_partitions--; |
| return; |
| } |
| if (cround(start) == cround(limit)) { |
| stop = limit; |
| } else { |
| snprintf(mesg, sizeof(mesg), |
| "Last %s or +size{,K,M,G,T}", |
| str_units(SINGULAR) |
| ); |
| stop = read_int(cround(start), cround(limit), cround(limit), cround(start), mesg); |
| if (display_in_cyl_units) { |
| stop = stop * units_per_sector - 1; |
| if (stop >limit) |
| stop = limit; |
| } |
| } |
| |
| set_partition(n, 0, start, stop, sys); |
| if (n > 4) |
| set_partition(n - 1, 1, ptes[n].offset_from_dev_start, stop, EXTENDED); |
| |
| if (IS_EXTENDED(sys)) { |
| struct pte *pe4 = &ptes[4]; |
| struct pte *pen = &ptes[n]; |
| |
| ext_index = n; |
| pen->ext_pointer = p; |
| pe4->offset_from_dev_start = extended_offset = start; |
| pe4->sectorbuffer = xzalloc(sector_size); |
| pe4->part_table = pt_offset(pe4->sectorbuffer, 0); |
| pe4->ext_pointer = pe4->part_table + 1; |
| pe4->changed = 1; |
| g_partitions = 5; |
| } |
| } |
| |
| static void |
| add_logical(void) |
| { |
| if (g_partitions > 5 || ptes[4].part_table->sys_ind) { |
| struct pte *pe = &ptes[g_partitions]; |
| |
| pe->sectorbuffer = xzalloc(sector_size); |
| pe->part_table = pt_offset(pe->sectorbuffer, 0); |
| pe->ext_pointer = pe->part_table + 1; |
| pe->offset_from_dev_start = 0; |
| pe->changed = 1; |
| g_partitions++; |
| } |
| add_partition(g_partitions - 1, LINUX_NATIVE); |
| } |
| |
| static void |
| new_partition(void) |
| { |
| int i, free_primary = 0; |
| |
| if (warn_geometry()) |
| return; |
| |
| if (LABEL_IS_SUN) { |
| add_sun_partition(get_partition(0, g_partitions), LINUX_NATIVE); |
| return; |
| } |
| if (LABEL_IS_SGI) { |
| sgi_add_partition(get_partition(0, g_partitions), LINUX_NATIVE); |
| return; |
| } |
| if (LABEL_IS_AIX) { |
| puts("Sorry - this fdisk cannot handle AIX disk labels.\n" |
| "If you want to add DOS-type partitions, create a new empty DOS partition\n" |
| "table first (use 'o'). This will destroy the present disk contents."); |
| return; |
| } |
| |
| for (i = 0; i < 4; i++) |
| free_primary += !ptes[i].part_table->sys_ind; |
| |
| if (!free_primary && g_partitions >= MAXIMUM_PARTS) { |
| puts("The maximum number of partitions has been created"); |
| return; |
| } |
| |
| if (!free_primary) { |
| if (extended_offset) |
| add_logical(); |
| else |
| puts("You must delete some partition and add " |
| "an extended partition first"); |
| } else { |
| char c, line[80]; |
| snprintf(line, sizeof(line), |
| "Partition type\n" |
| " p primary partition (1-4)\n" |
| " %s\n", |
| (extended_offset ? |
| "l logical (5 or over)" : "e extended")); |
| while (1) { |
| c = read_nonempty(line); |
| c |= 0x20; /* lowercase */ |
| if (c == 'p') { |
| i = get_nonexisting_partition(); |
| if (i >= 0) |
| add_partition(i, LINUX_NATIVE); |
| return; |
| } |
| if (c == 'l' && extended_offset) { |
| add_logical(); |
| return; |
| } |
| if (c == 'e' && !extended_offset) { |
| i = get_nonexisting_partition(); |
| if (i >= 0) |
| add_partition(i, EXTENDED); |
| return; |
| } |
| printf("Invalid partition number " |
| "for type '%c'\n", c); |
| } |
| } |
| } |
| |
| static void |
| reread_partition_table(int leave) |
| { |
| int i; |
| |
| puts("Calling ioctl() to re-read partition table"); |
| sync(); |
| /* Users with slow external USB disks on a 320MHz ARM system (year 2011) |
| * report that sleep is needed, otherwise BLKRRPART may fail with -EIO: |
| */ |
| sleep(1); |
| i = ioctl_or_perror(dev_fd, BLKRRPART, NULL, |
| "WARNING: rereading partition table " |
| "failed, kernel still uses old table"); |
| #if 0 |
| if (dos_changed) |
| puts( |
| "\nWARNING: If you have created or modified any DOS 6.x\n" |
| "partitions, please see the fdisk manual page for additional\n" |
| "information"); |
| #endif |
| |
| if (leave) { |
| if (ENABLE_FEATURE_CLEAN_UP) |
| close_dev_fd(); |
| exit(i != 0); |
| } |
| } |
| |
| static void |
| write_table(void) |
| { |
| int i; |
| |
| if (LABEL_IS_DOS) { |
| for (i = 0; i < 3; i++) |
| if (ptes[i].changed) |
| ptes[3].changed = 1; |
| for (i = 3; i < g_partitions; i++) { |
| struct pte *pe = &ptes[i]; |
| if (pe->changed) { |
| write_part_table_flag(pe->sectorbuffer); |
| write_sector(pe->offset_from_dev_start, pe->sectorbuffer); |
| } |
| } |
| } |
| else if (LABEL_IS_SGI) { |
| /* no test on change? the "altered" msg below might be mistaken */ |
| sgi_write_table(); |
| } |
| else if (LABEL_IS_SUN) { |
| for (i = 0; i < 8; i++) { |
| if (ptes[i].changed) { |
| sun_write_table(); |
| break; |
| } |
| } |
| } |
| |
| puts("The partition table has been altered."); |
| reread_partition_table(1); |
| } |
| #endif /* FEATURE_FDISK_WRITABLE */ |
| |
| #if ENABLE_FEATURE_FDISK_ADVANCED |
| #define MAX_PER_LINE 16 |
| static void |
| print_buffer(char *pbuffer) |
| { |
| int i,l; |
| |
| for (i = 0, l = 0; i < sector_size; i++, l++) { |
| if (l == 0) |
| printf("0x%03X:", i); |
| printf(" %02X", (unsigned char) pbuffer[i]); |
| if (l == MAX_PER_LINE - 1) { |
| bb_putchar('\n'); |
| l = -1; |
| } |
| } |
| if (l > 0) |
| bb_putchar('\n'); |
| bb_putchar('\n'); |
| } |
| |
| static void |
| print_raw(void) |
| { |
| int i; |
| |
| printf("Device: %s\n", disk_device); |
| if (LABEL_IS_SGI || LABEL_IS_SUN) |
| print_buffer(MBRbuffer); |
| else { |
| for (i = 3; i < g_partitions; i++) |
| print_buffer(ptes[i].sectorbuffer); |
| } |
| } |
| |
| static void |
| move_begin(unsigned i) |
| { |
| struct pte *pe = &ptes[i]; |
| struct partition *p = pe->part_table; |
| sector_t new, first, nr_sects; |
| |
| if (warn_geometry()) |
| return; |
| nr_sects = get_nr_sects(p); |
| if (!p->sys_ind || !nr_sects || IS_EXTENDED(p->sys_ind)) { |
| printf("Partition %u has no data area\n", i + 1); |
| return; |
| } |
| first = get_partition_start_from_dev_start(pe); /* == pe->offset_from_dev_start + get_start_sect(p) */ |
| new = read_int(0 /*was:first*/, first, first + nr_sects - 1, first, "New beginning of data"); |
| if (new != first) { |
| sector_t new_relative = new - pe->offset_from_dev_start; |
| nr_sects += (get_start_sect(p) - new_relative); |
| set_start_sect(p, new_relative); |
| set_nr_sects(p, nr_sects); |
| read_nonempty("Recalculate C/H/S values? (Y/N): "); |
| if ((line_ptr[0] | 0x20) == 'y') |
| set_hsc_start_end(p, new, new + nr_sects - 1); |
| pe->changed = 1; |
| } |
| } |
| |
| static void |
| xselect(void) |
| { |
| char c; |
| |
| while (1) { |
| bb_putchar('\n'); |
| c = 0x20 | read_nonempty("Expert command (m for help): "); |
| switch (c) { |
| case 'a': |
| if (LABEL_IS_SUN) |
| sun_set_alt_cyl(); |
| break; |
| case 'b': |
| if (LABEL_IS_DOS) |
| move_begin(get_partition(0, g_partitions)); |
| break; |
| case 'c': |
| user_cylinders = g_cylinders = |
| read_int(1, g_cylinders, 1048576, 0, |
| "Number of cylinders"); |
| if (LABEL_IS_SUN) |
| sun_set_ncyl(g_cylinders); |
| if (LABEL_IS_DOS) |
| warn_cylinders(); |
| break; |
| case 'd': |
| print_raw(); |
| break; |
| case 'e': |
| if (LABEL_IS_SGI) |
| sgi_set_xcyl(); |
| else if (LABEL_IS_SUN) |
| sun_set_xcyl(); |
| else if (LABEL_IS_DOS) |
| x_list_table(1); |
| break; |
| case 'f': |
| if (LABEL_IS_DOS) |
| fix_partition_table_order(); |
| break; |
| case 'g': |
| #if ENABLE_FEATURE_SGI_LABEL |
| create_sgilabel(); |
| #endif |
| break; |
| case 'h': |
| user_heads = g_heads = read_int(1, g_heads, 256, 0, "Number of heads"); |
| update_units(); |
| break; |
| case 'i': |
| if (LABEL_IS_SUN) |
| sun_set_ilfact(); |
| break; |
| case 'o': |
| if (LABEL_IS_SUN) |
| sun_set_rspeed(); |
| break; |
| case 'p': |
| if (LABEL_IS_SUN) |
| list_table(1); |
| else |
| x_list_table(0); |
| break; |
| case 'q': |
| if (ENABLE_FEATURE_CLEAN_UP) |
| close_dev_fd(); |
| bb_putchar('\n'); |
| exit(EXIT_SUCCESS); |
| case 'r': |
| return; |
| case 's': |
| user_sectors = g_sectors = read_int(1, g_sectors, 63, 0, "Number of sectors"); |
| if (dos_compatible_flag) { |
| sector_offset = g_sectors; |
| puts("Warning: setting sector offset for DOS " |
| "compatibility"); |
| } |
| update_units(); |
| break; |
| case 'v': |
| verify(); |
| break; |
| case 'w': |
| write_table(); /* does not return */ |
| break; |
| case 'y': |
| if (LABEL_IS_SUN) |
| sun_set_pcylcount(); |
| break; |
| default: |
| xmenu(); |
| } |
| } |
| } |
| #endif /* ADVANCED mode */ |
| |
| static int |
| is_ide_cdrom_or_tape(const char *device) |
| { |
| FILE *procf; |
| char buf[100]; |
| struct stat statbuf; |
| int is_ide = 0; |
| |
| /* No device was given explicitly, and we are trying some |
| likely things. But opening /dev/hdc may produce errors like |
| "hdc: tray open or drive not ready" |
| if it happens to be a CD-ROM drive. It even happens that |
| the process hangs on the attempt to read a music CD. |
| So try to be careful. This only works since 2.1.73. */ |
| |
| if (!is_prefixed_with(device, "/dev/hd")) |
| return 0; |
| |
| snprintf(buf, sizeof(buf), "/proc/ide/%s/media", device+5); |
| procf = fopen_for_read(buf); |
| if (procf != NULL && fgets(buf, sizeof(buf), procf)) |
| is_ide = (is_prefixed_with(buf, "cdrom") || |
| is_prefixed_with(buf, "tape")); |
| else |
| /* Now when this proc file does not exist, skip the |
| device when it is read-only. */ |
| if (stat(device, &statbuf) == 0) |
| is_ide = ((statbuf.st_mode & 0222) == 0); |
| |
| if (procf) |
| fclose(procf); |
| return is_ide; |
| } |
| |
| |
| static void |
| open_list_and_close(const char *device, int user_specified) |
| { |
| int gb; |
| |
| disk_device = device; |
| if (setjmp(listingbuf)) |
| return; |
| if (!user_specified) |
| if (is_ide_cdrom_or_tape(device)) |
| return; |
| |
| /* Open disk_device, save file descriptor to dev_fd */ |
| errno = 0; |
| gb = get_boot(TRY_ONLY); |
| if (gb > 0) { /* I/O error */ |
| /* Ignore other errors, since we try IDE |
| and SCSI hard disks which may not be |
| installed on the system. */ |
| if (user_specified || errno == EACCES) |
| bb_perror_msg("can't open '%s'", device); |
| return; |
| } |
| |
| if (gb < 0) { /* no DOS signature */ |
| list_disk_geometry(); |
| if (LABEL_IS_AIX) |
| goto ret; |
| #if ENABLE_FEATURE_OSF_LABEL |
| if (bsd_trydev(device) < 0) |
| #endif |
| printf("Disk %s doesn't contain a valid " |
| "partition table\n", device); |
| } else { |
| list_table(0); |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| if (!LABEL_IS_SUN && g_partitions > 4) { |
| delete_partition(ext_index); |
| } |
| #endif |
| } |
| ret: |
| close_dev_fd(); |
| } |
| |
| /* Is it a whole disk? The digit check is still useful |
| for Xen devices for example. */ |
| static int is_whole_disk(const char *disk) |
| { |
| unsigned len; |
| int fd = open(disk, O_RDONLY); |
| |
| if (fd != -1) { |
| struct hd_geometry geometry; |
| int err = ioctl(fd, HDIO_GETGEO, &geometry); |
| close(fd); |
| if (!err) |
| return (geometry.start == 0); |
| } |
| |
| /* Treat "nameN" as a partition name, not whole disk */ |
| /* note: mmcblk0 should work from the geometry check above */ |
| len = strlen(disk); |
| if (len != 0 && isdigit(disk[len - 1])) |
| return 0; |
| |
| return 1; |
| } |
| |
| /* for fdisk -l: try all things in /proc/partitions |
| that look like a partition name (do not end in a digit) */ |
| static void |
| list_devs_in_proc_partititons(void) |
| { |
| FILE *procpt; |
| char line[100], ptname[100], devname[120]; |
| int ma, mi, sz; |
| |
| procpt = fopen_or_warn("/proc/partitions", "r"); |
| |
| while (fgets(line, sizeof(line), procpt)) { |
| if (sscanf(line, " %u %u %u %[^\n ]", |
| &ma, &mi, &sz, ptname) != 4) |
| continue; |
| |
| sprintf(devname, "/dev/%s", ptname); |
| if (is_whole_disk(devname)) |
| open_list_and_close(devname, 0); |
| } |
| #if ENABLE_FEATURE_CLEAN_UP |
| fclose(procpt); |
| #endif |
| } |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| static void |
| unknown_command(int c) |
| { |
| printf("%c: unknown command\n", c); |
| } |
| #endif |
| |
| int fdisk_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int fdisk_main(int argc UNUSED_PARAM, char **argv) |
| { |
| unsigned opt; |
| /* |
| * fdisk -v |
| * fdisk -l [-b sectorsize] [-u] device ... |
| * fdisk -s [partition] ... |
| * fdisk [-b sectorsize] [-u] device |
| * |
| * Options -C, -H, -S set the geometry. |
| */ |
| INIT_G(); |
| |
| close_dev_fd(); /* needed: fd 3 must not stay closed */ |
| |
| opt = getopt32(argv, "b:+C:+H:+lS:+u" IF_FEATURE_FDISK_BLKSIZE("s"), |
| §or_size, &user_cylinders, &user_heads, &user_sectors); |
| argv += optind; |
| if (opt & OPT_b) { |
| /* Ugly: this sector size is really per device, |
| * so cannot be combined with multiple disks, |
| * and the same goes for the C/H/S options. |
| */ |
| if (sector_size < 512 |
| || sector_size > 0x10000 |
| || (sector_size & (sector_size-1)) /* not power of 2 */ |
| ) { |
| bb_show_usage(); |
| } |
| sector_offset = 2; |
| user_set_sector_size = 1; |
| } |
| if (user_heads <= 0 || user_heads >= 256) |
| user_heads = 0; |
| if (user_sectors <= 0 || user_sectors >= 64) |
| user_sectors = 0; |
| if (opt & OPT_u) |
| display_in_cyl_units = 0; // -u |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| if (opt & OPT_l) { |
| nowarn = 1; |
| #endif |
| if (*argv) { |
| listing = 1; |
| do { |
| open_list_and_close(*argv, 1); |
| } while (*++argv); |
| } else { |
| /* we don't have device names, */ |
| /* use /proc/partitions instead */ |
| list_devs_in_proc_partititons(); |
| } |
| return 0; |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| } |
| #endif |
| |
| #if ENABLE_FEATURE_FDISK_BLKSIZE |
| if (opt & OPT_s) { |
| int j; |
| |
| nowarn = 1; |
| if (!argv[0]) |
| bb_show_usage(); |
| for (j = 0; argv[j]; j++) { |
| unsigned long long size; |
| fd = xopen(argv[j], O_RDONLY); |
| size = bb_BLKGETSIZE_sectors(fd) / 2; |
| close(fd); |
| if (argv[1]) |
| printf("%llu\n", size); |
| else |
| printf("%s: %llu\n", argv[j], size); |
| } |
| return 0; |
| } |
| #endif |
| |
| #if ENABLE_FEATURE_FDISK_WRITABLE |
| if (!argv[0] || argv[1]) |
| bb_show_usage(); |
| |
| disk_device = argv[0]; |
| get_boot(OPEN_MAIN); |
| |
| if (LABEL_IS_OSF) { |
| /* OSF label, and no DOS label */ |
| printf("Detected an OSF/1 disklabel on %s, entering " |
| "disklabel mode\n", disk_device); |
| bsd_select(); |
| /*Why do we do this? It seems to be counter-intuitive*/ |
| current_label_type = LABEL_DOS; |
| /* If we return we may want to make an empty DOS label? */ |
| } |
| |
| while (1) { |
| int c; |
| bb_putchar('\n'); |
| c = 0x20 | read_nonempty("Command (m for help): "); |
| switch (c) { |
| case 'a': |
| if (LABEL_IS_DOS) |
| toggle_active(get_partition(1, g_partitions)); |
| else if (LABEL_IS_SUN) |
| toggle_sunflags(get_partition(1, g_partitions), |
| 0x01); |
| else if (LABEL_IS_SGI) |
| sgi_set_bootpartition( |
| get_partition(1, g_partitions)); |
| else |
| unknown_command(c); |
| break; |
| case 'b': |
| if (LABEL_IS_SGI) { |
| printf("\nThe current boot file is: %s\n", |
| sgi_get_bootfile()); |
| if (read_maybe_empty("Please enter the name of the " |
| "new boot file: ") == '\n') |
| puts("Boot file unchanged"); |
| else |
| sgi_set_bootfile(line_ptr); |
| } |
| #if ENABLE_FEATURE_OSF_LABEL |
| else |
| bsd_select(); |
| #endif |
| break; |
| case 'c': |
| if (LABEL_IS_DOS) |
| toggle_dos_compatibility_flag(); |
| else if (LABEL_IS_SUN) |
| toggle_sunflags(get_partition(1, g_partitions), |
| 0x10); |
| else if (LABEL_IS_SGI) |
| sgi_set_swappartition( |
| get_partition(1, g_partitions)); |
| else |
| unknown_command(c); |
| break; |
| case 'd': |
| { |
| int j; |
| /* If sgi_label then don't use get_existing_partition, |
| let the user select a partition, since |
| get_existing_partition() only works for Linux-like |
| partition tables */ |
| if (!LABEL_IS_SGI) { |
| j = get_existing_partition(1, g_partitions); |
| } else { |
| j = get_partition(1, g_partitions); |
| } |
| if (j >= 0) |
| delete_partition(j); |
| } |
| break; |
| case 'i': |
| if (LABEL_IS_SGI) |
| create_sgiinfo(); |
| else |
| unknown_command(c); |
| case 'l': |
| list_types(get_sys_types()); |
| break; |
| case 'm': |
| menu(); |
| break; |
| case 'n': |
| new_partition(); |
| break; |
| case 'o': |
| create_doslabel(); |
| break; |
| case 'p': |
| list_table(0); |
| break; |
| case 'q': |
| if (ENABLE_FEATURE_CLEAN_UP) |
| close_dev_fd(); |
| bb_putchar('\n'); |
| return 0; |
| case 's': |
| #if ENABLE_FEATURE_SUN_LABEL |
| create_sunlabel(); |
| #endif |
| break; |
| case 't': |
| change_sysid(); |
| break; |
| case 'u': |
| change_units(); |
| break; |
| case 'v': |
| verify(); |
| break; |
| case 'w': |
| write_table(); /* does not return */ |
| break; |
| #if ENABLE_FEATURE_FDISK_ADVANCED |
| case 'x': |
| if (LABEL_IS_SGI) { |
| puts("\n\tSorry, no experts menu for SGI " |
| "partition tables available\n"); |
| } else |
| xselect(); |
| break; |
| #endif |
| default: |
| unknown_command(c); |
| menu(); |
| } |
| } |
| return 0; |
| #endif /* FEATURE_FDISK_WRITABLE */ |
| } |