| /* vi: set sw=4 ts=4: */ |
| /* dhcpc.c |
| * |
| * udhcp DHCP client |
| * |
| * Russ Dill <Russ.Dill@asu.edu> July 2001 |
| * |
| * Licensed under the GPL v2 or later, see the file LICENSE in this tarball. |
| */ |
| |
| #include <getopt.h> |
| #include <syslog.h> |
| |
| /* Override ENABLE_FEATURE_PIDFILE - ifupdown needs our pidfile to always exist */ |
| #define WANT_PIDFILE 1 |
| #include "common.h" |
| #include "dhcpd.h" |
| #include "dhcpc.h" |
| #include "options.h" |
| |
| |
| static int timeout; /* = 0. Must be signed */ |
| static uint32_t requested_ip; /* = 0 */ |
| static uint32_t server_addr; |
| static int sockfd = -1; |
| |
| #define LISTEN_NONE 0 |
| #define LISTEN_KERNEL 1 |
| #define LISTEN_RAW 2 |
| static smallint listen_mode; |
| |
| static smallint state; |
| |
| /* struct client_config_t client_config is in bb_common_bufsiz1 */ |
| |
| |
| /* just a little helper */ |
| static void change_listen_mode(int new_mode) |
| { |
| DEBUG("entering %s listen mode", |
| new_mode ? (new_mode == 1 ? "kernel" : "raw") : "none"); |
| if (sockfd >= 0) { |
| close(sockfd); |
| sockfd = -1; |
| } |
| listen_mode = new_mode; |
| } |
| |
| |
| /* perform a renew */ |
| static void perform_renew(void) |
| { |
| bb_info_msg("Performing a DHCP renew"); |
| switch (state) { |
| case BOUND: |
| change_listen_mode(LISTEN_KERNEL); |
| case RENEWING: |
| case REBINDING: |
| state = RENEW_REQUESTED; |
| break; |
| case RENEW_REQUESTED: /* impatient are we? fine, square 1 */ |
| udhcp_run_script(NULL, "deconfig"); |
| case REQUESTING: |
| case RELEASED: |
| change_listen_mode(LISTEN_RAW); |
| state = INIT_SELECTING; |
| break; |
| case INIT_SELECTING: |
| break; |
| } |
| } |
| |
| |
| /* perform a release */ |
| static void perform_release(void) |
| { |
| char buffer[sizeof("255.255.255.255")]; |
| struct in_addr temp_addr; |
| |
| /* send release packet */ |
| if (state == BOUND || state == RENEWING || state == REBINDING) { |
| temp_addr.s_addr = server_addr; |
| strcpy(buffer, inet_ntoa(temp_addr)); |
| temp_addr.s_addr = requested_ip; |
| bb_info_msg("Unicasting a release of %s to %s", |
| inet_ntoa(temp_addr), buffer); |
| send_release(server_addr, requested_ip); /* unicast */ |
| udhcp_run_script(NULL, "deconfig"); |
| } |
| bb_info_msg("Entering released state"); |
| |
| change_listen_mode(LISTEN_NONE); |
| state = RELEASED; |
| timeout = INT_MAX; |
| } |
| |
| |
| static void client_background(void) |
| { |
| #if !BB_MMU |
| bb_error_msg("cannot background in uclinux (yet)"); |
| /* ... mainly because udhcpc calls client_background() |
| * in _the _middle _of _udhcpc _run_, not at the start! |
| * If that will be properly disabled for NOMMU, client_background() |
| * will work on NOMMU too */ |
| #else |
| bb_daemonize(0); |
| logmode &= ~LOGMODE_STDIO; |
| /* rewrite pidfile, as our pid is different now */ |
| write_pidfile(client_config.pidfile); |
| #endif |
| /* Do not fork again. */ |
| client_config.foreground = 1; |
| client_config.background_if_no_lease = 0; |
| } |
| |
| |
| static uint8_t* alloc_dhcp_option(int code, const char *str, int extra) |
| { |
| uint8_t *storage; |
| int len = strlen(str); |
| if (len > 255) len = 255; |
| storage = xzalloc(len + extra + OPT_DATA); |
| storage[OPT_CODE] = code; |
| storage[OPT_LEN] = len + extra; |
| memcpy(storage + extra + OPT_DATA, str, len); |
| return storage; |
| } |
| |
| |
| int udhcpc_main(int argc, char **argv) MAIN_EXTERNALLY_VISIBLE; |
| int udhcpc_main(int argc, char **argv) |
| { |
| uint8_t *temp, *message; |
| char *str_c, *str_V, *str_h, *str_F, *str_r, *str_T, *str_A, *str_t; |
| USE_FEATURE_UDHCP_PORT(char *str_P;) |
| llist_t *list_O = NULL; |
| #if ENABLE_FEATURE_UDHCPC_ARPING |
| char *str_W; |
| #endif |
| int tryagain_timeout = 20; |
| int discover_timeout = 3; |
| int discover_retries = 3; |
| uint32_t xid = 0; |
| uint32_t lease_seconds = 0; /* can be given as 32-bit quantity */ |
| int packet_num; |
| /* t1, t2... what a wonderful names... */ |
| unsigned t1 = t1; /* for gcc */ |
| unsigned t2 = t2; |
| unsigned timestamp_got_lease = timestamp_got_lease; |
| unsigned opt; |
| int max_fd; |
| int retval; |
| int len; |
| struct timeval tv; |
| struct in_addr temp_addr; |
| struct dhcpMessage packet; |
| fd_set rfds; |
| |
| enum { |
| OPT_c = 1 << 0, |
| OPT_C = 1 << 1, |
| OPT_V = 1 << 2, |
| OPT_f = 1 << 3, |
| OPT_b = 1 << 4, |
| OPT_H = 1 << 5, |
| OPT_h = 1 << 6, |
| OPT_F = 1 << 7, |
| OPT_i = 1 << 8, |
| OPT_n = 1 << 9, |
| OPT_p = 1 << 10, |
| OPT_q = 1 << 11, |
| OPT_R = 1 << 12, |
| OPT_r = 1 << 13, |
| OPT_s = 1 << 14, |
| OPT_T = 1 << 15, |
| OPT_t = 1 << 16, |
| OPT_v = 1 << 17, |
| OPT_S = 1 << 18, |
| OPT_A = 1 << 19, |
| #if ENABLE_FEATURE_UDHCPC_ARPING |
| OPT_a = 1 << 20, |
| OPT_W = 1 << 21, |
| #endif |
| OPT_P = 1 << 22, |
| }; |
| #if ENABLE_GETOPT_LONG |
| static const char udhcpc_longopts[] ALIGN1 = |
| "clientid\0" Required_argument "c" |
| "clientid-none\0" No_argument "C" |
| "vendorclass\0" Required_argument "V" |
| "foreground\0" No_argument "f" |
| "background\0" No_argument "b" |
| "hostname\0" Required_argument "H" |
| "fqdn\0" Required_argument "F" |
| "interface\0" Required_argument "i" |
| "now\0" No_argument "n" |
| "pidfile\0" Required_argument "p" |
| "quit\0" No_argument "q" |
| "release\0" No_argument "R" |
| "request\0" Required_argument "r" |
| "script\0" Required_argument "s" |
| "timeout\0" Required_argument "T" |
| "version\0" No_argument "v" |
| "retries\0" Required_argument "t" |
| "tryagain\0" Required_argument "A" |
| "syslog\0" No_argument "S" |
| #if ENABLE_FEATURE_UDHCPC_ARPING |
| "arping\0" No_argument "a" |
| #endif |
| "request-option\0" Required_argument "O" |
| #if ENABLE_FEATURE_UDHCP_PORT |
| "client-port\0" Required_argument "P" |
| #endif |
| ; |
| #endif |
| /* Default options. */ |
| #if ENABLE_FEATURE_UDHCP_PORT |
| SERVER_PORT = 67; |
| CLIENT_PORT = 68; |
| #endif |
| client_config.interface = "eth0"; |
| client_config.script = DEFAULT_SCRIPT; |
| |
| /* Parse command line */ |
| opt_complementary = "c--C:C--c:O::"; // Cc: mutually exclusive; O: list |
| #if ENABLE_GETOPT_LONG |
| applet_long_options = udhcpc_longopts; |
| #endif |
| opt = getopt32(argv, "c:CV:fbH:h:F:i:np:qRr:s:T:t:vSA:" |
| USE_FEATURE_UDHCPC_ARPING("aW:") |
| USE_FEATURE_UDHCP_PORT("P:") |
| "O:" |
| , &str_c, &str_V, &str_h, &str_h, &str_F |
| , &client_config.interface, &client_config.pidfile, &str_r |
| , &client_config.script, &str_T, &str_t, &str_A |
| USE_FEATURE_UDHCPC_ARPING(, &str_W) |
| USE_FEATURE_UDHCP_PORT(, &str_P) |
| , &list_O |
| ); |
| |
| if (opt & OPT_c) |
| client_config.clientid = alloc_dhcp_option(DHCP_CLIENT_ID, str_c, 0); |
| //if (opt & OPT_C) |
| if (opt & OPT_V) |
| client_config.vendorclass = alloc_dhcp_option(DHCP_VENDOR, str_V, 0); |
| if (opt & OPT_f) |
| client_config.foreground = 1; |
| if (opt & OPT_b) |
| client_config.background_if_no_lease = 1; |
| if (opt & (OPT_h|OPT_H)) |
| client_config.hostname = alloc_dhcp_option(DHCP_HOST_NAME, str_h, 0); |
| if (opt & OPT_F) { |
| client_config.fqdn = alloc_dhcp_option(DHCP_FQDN, str_F, 3); |
| /* Flags: 0000NEOS |
| S: 1 => Client requests Server to update A RR in DNS as well as PTR |
| O: 1 => Server indicates to client that DNS has been updated regardless |
| E: 1 => Name data is DNS format, i.e. <4>host<6>domain<4>com<0> not "host.domain.com" |
| N: 1 => Client requests Server to not update DNS |
| */ |
| client_config.fqdn[OPT_DATA + 0] = 0x1; |
| /* client_config.fqdn[OPT_DATA + 1] = 0; - redundant */ |
| /* client_config.fqdn[OPT_DATA + 2] = 0; - redundant */ |
| } |
| // if (opt & OPT_i) client_config.interface = ... |
| if (opt & OPT_n) |
| client_config.abort_if_no_lease = 1; |
| // if (opt & OPT_p) client_config.pidfile = ... |
| if (opt & OPT_q) |
| client_config.quit_after_lease = 1; |
| if (opt & OPT_R) |
| client_config.release_on_quit = 1; |
| if (opt & OPT_r) |
| requested_ip = inet_addr(str_r); |
| // if (opt & OPT_s) client_config.script = ... |
| if (opt & OPT_T) |
| discover_timeout = xatoi_u(str_T); |
| if (opt & OPT_t) |
| discover_retries = xatoi_u(str_t); |
| if (opt & OPT_A) |
| tryagain_timeout = xatoi_u(str_A); |
| if (opt & OPT_v) { |
| puts("version "BB_VER); |
| return 0; |
| } |
| if (opt & OPT_S) { |
| openlog(applet_name, LOG_PID, LOG_LOCAL0); |
| logmode |= LOGMODE_SYSLOG; |
| } |
| #if ENABLE_FEATURE_UDHCP_PORT |
| if (opt & OPT_P) { |
| CLIENT_PORT = xatou16(str_P); |
| SERVER_PORT = CLIENT_PORT - 1; |
| } |
| #endif |
| while (list_O) { |
| int n = index_in_strings(dhcp_option_strings, list_O->data); |
| if (n < 0) |
| bb_error_msg_and_die("unknown option '%s'", list_O->data); |
| n = dhcp_options[n].code; |
| client_config.opt_mask[n >> 3] |= 1 << (n & 7); |
| list_O = list_O->link; |
| } |
| |
| if (read_interface(client_config.interface, &client_config.ifindex, |
| NULL, client_config.arp)) |
| return 1; |
| |
| /* Make sure fd 0,1,2 are open */ |
| bb_sanitize_stdio(); |
| /* Equivalent of doing a fflush after every \n */ |
| setlinebuf(stdout); |
| |
| /* Create pidfile */ |
| write_pidfile(client_config.pidfile); |
| /* if (!..) bb_perror_msg("cannot create pidfile %s", pidfile); */ |
| |
| /* Goes to stdout and possibly syslog */ |
| bb_info_msg("%s (v"BB_VER") started", applet_name); |
| |
| /* if not set, and not suppressed, setup the default client ID */ |
| if (!client_config.clientid && !(opt & OPT_C)) { |
| client_config.clientid = alloc_dhcp_option(DHCP_CLIENT_ID, "", 7); |
| client_config.clientid[OPT_DATA] = 1; |
| memcpy(client_config.clientid + OPT_DATA+1, client_config.arp, 6); |
| } |
| |
| if (!client_config.vendorclass) |
| client_config.vendorclass = alloc_dhcp_option(DHCP_VENDOR, "udhcp "BB_VER, 0); |
| |
| /* setup the signal pipe */ |
| udhcp_sp_setup(); |
| |
| state = INIT_SELECTING; |
| udhcp_run_script(NULL, "deconfig"); |
| change_listen_mode(LISTEN_RAW); |
| packet_num = 0; |
| |
| /* Main event loop. select() waits on signal pipe and possibly |
| * on sockfd. |
| * "continue" statements in code below jump to the top of the loop. |
| */ |
| for (;;) { |
| tv.tv_sec = timeout; |
| tv.tv_usec = 0; |
| |
| if (listen_mode != LISTEN_NONE && sockfd < 0) { |
| if (listen_mode == LISTEN_KERNEL) |
| sockfd = listen_socket(/*INADDR_ANY,*/ CLIENT_PORT, client_config.interface); |
| else |
| sockfd = raw_socket(client_config.ifindex); |
| } |
| max_fd = udhcp_sp_fd_set(&rfds, sockfd); |
| |
| retval = 0; /* If we already timed out, fall through, else... */ |
| if (tv.tv_sec > 0) { |
| DEBUG("Waiting on select..."); |
| retval = select(max_fd + 1, &rfds, NULL, NULL, &tv); |
| } |
| |
| if (retval < 0) { |
| /* EINTR? signal was caught, don't panic */ |
| if (errno != EINTR) { |
| /* Else: an error occured, panic! */ |
| bb_perror_msg_and_die("select"); |
| } |
| continue; |
| } |
| |
| /* If timeout dropped to zero, time to become active: |
| * resend discover/renew/whatever |
| */ |
| if (retval == 0) { |
| switch (state) { |
| case INIT_SELECTING: |
| if (packet_num < discover_retries) { |
| if (packet_num == 0) |
| xid = random_xid(); |
| |
| /* send discover packet */ |
| send_discover(xid, requested_ip); /* broadcast */ |
| |
| timeout = discover_timeout; |
| packet_num++; |
| continue; |
| } |
| udhcp_run_script(NULL, "leasefail"); |
| if (client_config.background_if_no_lease) { |
| bb_info_msg("No lease, forking to background"); |
| client_background(); |
| } else if (client_config.abort_if_no_lease) { |
| bb_info_msg("No lease, failing"); |
| retval = 1; |
| goto ret; |
| } |
| /* wait to try again */ |
| timeout = tryagain_timeout; |
| packet_num = 0; |
| continue; |
| case RENEW_REQUESTED: |
| case REQUESTING: |
| if (packet_num < discover_retries) { |
| /* send request packet */ |
| if (state == RENEW_REQUESTED) |
| send_renew(xid, server_addr, requested_ip); /* unicast */ |
| else send_selecting(xid, server_addr, requested_ip); /* broadcast */ |
| |
| timeout = ((packet_num == 2) ? 10 : 2); |
| packet_num++; |
| continue; |
| } |
| /* timed out, go back to init state */ |
| if (state == RENEW_REQUESTED) |
| udhcp_run_script(NULL, "deconfig"); |
| change_listen_mode(LISTEN_RAW); |
| state = INIT_SELECTING; |
| timeout = 0; |
| packet_num = 0; |
| continue; |
| case BOUND: |
| /* Lease is starting to run out, time to enter renewing state */ |
| change_listen_mode(LISTEN_KERNEL); |
| DEBUG("Entering renew state"); |
| state = RENEWING; |
| /* fall right through */ |
| case RENEWING: |
| /* Either set a new T1, or enter REBINDING state */ |
| if ((t2 - t1) > (lease_seconds / (4*60*60) + 1)) { |
| /* send a request packet */ |
| send_renew(xid, server_addr, requested_ip); /* unicast */ |
| t1 += (t2 - t1) / 2; |
| timeout = t1 - ((int)monotonic_sec() - timestamp_got_lease); |
| continue; |
| } |
| /* Timed out, enter rebinding state */ |
| DEBUG("Entering rebinding state"); |
| state = REBINDING; |
| timeout = (t2 - t1); |
| continue; |
| case REBINDING: |
| /* Lease is *really* about to run out, |
| * try to find DHCP server using broadcast */ |
| if ((lease_seconds - t2) > (lease_seconds / (4*60*60) + 1)) { |
| /* send a request packet */ |
| send_renew(xid, 0, requested_ip); /* broadcast */ |
| t2 += (lease_seconds - t2) / 2; |
| timeout = t2 - ((int)monotonic_sec() - timestamp_got_lease); |
| continue; |
| } |
| /* Timed out, enter init state */ |
| bb_info_msg("Lease lost, entering init state"); |
| udhcp_run_script(NULL, "deconfig"); |
| change_listen_mode(LISTEN_RAW); |
| state = INIT_SELECTING; |
| timeout = 0; |
| packet_num = 0; |
| continue; |
| /* case RELEASED: */ |
| } |
| /* yah, I know, *you* say it would never happen */ |
| timeout = INT_MAX; |
| continue; /* back to main loop */ |
| } |
| |
| /* select() didn't timeout, something did happen. */ |
| /* Is is a packet? */ |
| if (listen_mode != LISTEN_NONE && FD_ISSET(sockfd, &rfds)) { |
| /* A packet is ready, read it */ |
| |
| if (listen_mode == LISTEN_KERNEL) |
| len = udhcp_recv_packet(&packet, sockfd); |
| else |
| len = get_raw_packet(&packet, sockfd); |
| |
| if (len == -1) { /* error is severe, reopen socket */ |
| DEBUG("error on read, %s, reopening socket", strerror(errno)); |
| change_listen_mode(listen_mode); /* just close and reopen */ |
| } |
| if (len < 0) continue; |
| |
| if (packet.xid != xid) { |
| DEBUG("Ignoring XID %x (our xid is %x)", |
| (unsigned)packet.xid, (unsigned)xid); |
| continue; |
| } |
| |
| /* Ignore packets that aren't for us */ |
| if (memcmp(packet.chaddr, client_config.arp, 6)) { |
| DEBUG("Packet does not have our chaddr - ignoring"); |
| continue; |
| } |
| |
| message = get_option(&packet, DHCP_MESSAGE_TYPE); |
| if (message == NULL) { |
| bb_error_msg("cannot get message type from packet - ignoring"); |
| continue; |
| } |
| |
| switch (state) { |
| case INIT_SELECTING: |
| /* Must be a DHCPOFFER to one of our xid's */ |
| if (*message == DHCPOFFER) { |
| /* TODO: why we don't just fetch server's IP from IP header? */ |
| temp = get_option(&packet, DHCP_SERVER_ID); |
| if (!temp) { |
| bb_error_msg("no server ID in message"); |
| continue; |
| /* still selecting - this server looks bad */ |
| } |
| /* can be misaligned, thus memcpy */ |
| memcpy(&server_addr, temp, 4); |
| xid = packet.xid; |
| requested_ip = packet.yiaddr; |
| |
| /* enter requesting state */ |
| state = REQUESTING; |
| timeout = 0; |
| packet_num = 0; |
| } |
| continue; |
| case RENEW_REQUESTED: |
| case REQUESTING: |
| case RENEWING: |
| case REBINDING: |
| if (*message == DHCPACK) { |
| temp = get_option(&packet, DHCP_LEASE_TIME); |
| if (!temp) { |
| bb_error_msg("no lease time with ACK, using 1 hour lease"); |
| lease_seconds = 60 * 60; |
| } else { |
| /* can be misaligned, thus memcpy */ |
| memcpy(&lease_seconds, temp, 4); |
| lease_seconds = ntohl(lease_seconds); |
| } |
| #if ENABLE_FEATURE_UDHCPC_ARPING |
| if (opt & OPT_a) { |
| if (!arpping(packet.yiaddr, |
| (uint32_t) 0, |
| client_config.arp, |
| client_config.interface) |
| ) { |
| bb_info_msg("offered address is in use " |
| "(got ARP reply), declining"); |
| send_decline(xid, server_addr, packet.yiaddr); |
| |
| if (state != REQUESTING) |
| udhcp_run_script(NULL, "deconfig"); |
| change_listen_mode(LISTEN_RAW); |
| state = INIT_SELECTING; |
| requested_ip = 0; |
| timeout = tryagain_timeout; |
| packet_num = 0; |
| continue; /* back to main loop */ |
| } |
| } |
| #endif |
| /* enter bound state */ |
| t1 = lease_seconds / 2; |
| |
| /* little fixed point for n * .875 */ |
| t2 = (lease_seconds * 7) >> 3; |
| temp_addr.s_addr = packet.yiaddr; |
| bb_info_msg("Lease of %s obtained, lease time %u", |
| inet_ntoa(temp_addr), (unsigned)lease_seconds); |
| timestamp_got_lease = monotonic_sec(); |
| timeout = t1; |
| requested_ip = packet.yiaddr; |
| udhcp_run_script(&packet, |
| ((state == RENEWING || state == REBINDING) ? "renew" : "bound")); |
| |
| state = BOUND; |
| change_listen_mode(LISTEN_NONE); |
| if (client_config.quit_after_lease) { |
| if (client_config.release_on_quit) |
| perform_release(); |
| goto ret0; |
| } |
| if (!client_config.foreground) |
| client_background(); |
| |
| continue; /* back to main loop */ |
| } |
| if (*message == DHCPNAK) { |
| /* return to init state */ |
| bb_info_msg("Received DHCP NAK"); |
| udhcp_run_script(&packet, "nak"); |
| if (state != REQUESTING) |
| udhcp_run_script(NULL, "deconfig"); |
| change_listen_mode(LISTEN_RAW); |
| sleep(3); /* avoid excessive network traffic */ |
| state = INIT_SELECTING; |
| requested_ip = 0; |
| timeout = 0; |
| packet_num = 0; |
| } |
| continue; |
| /* case BOUND, RELEASED: - ignore all packets */ |
| } |
| continue; /* back to main loop */ |
| } |
| |
| /* select() didn't timeout, something did happen. |
| * But it wasn't a packet. It's a signal pipe then. */ |
| { |
| int signo = udhcp_sp_read(&rfds); |
| switch (signo) { |
| case SIGUSR1: |
| perform_renew(); |
| /* start things over */ |
| packet_num = 0; |
| /* Kill any timeouts because the user wants this to hurry along */ |
| timeout = 0; |
| break; |
| case SIGUSR2: |
| perform_release(); |
| break; |
| case SIGTERM: |
| bb_info_msg("Received SIGTERM"); |
| if (client_config.release_on_quit) |
| perform_release(); |
| goto ret0; |
| } |
| } |
| } /* for (;;) - main loop ends */ |
| |
| ret0: |
| retval = 0; |
| ret: |
| /*if (client_config.pidfile) - remove_pidfile has it's own check */ |
| remove_pidfile(client_config.pidfile); |
| return retval; |
| } |