Convert all util-linux/* applets to "new style" applet definitions

Signed-off-by: Denys Vlasenko <vda.linux@googlemail.com>
diff --git a/util-linux/Config.src b/util-linux/Config.src
index 9bef0d5..3c522f9 100644
--- a/util-linux/Config.src
+++ b/util-linux/Config.src
@@ -7,511 +7,6 @@
 
 INSERT
 
-config ACPID
-	bool "acpid"
-	default y
-	select PLATFORM_LINUX
-	help
-	  acpid listens to ACPI events coming either in textual form from
-	  /proc/acpi/event (though it is marked deprecated it is still widely
-	  used and _is_ a standard) or in binary form from specified evdevs
-	  (just use /dev/input/event*).
-
-	  It parses the event to retrieve ACTION and a possible PARAMETER.
-	  It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
-	  (if the resulting path is a directory) or directly as an executable.
-
-	  N.B. acpid relies on run-parts so have the latter installed.
-
-config FEATURE_ACPID_COMPAT
-	bool "Accept and ignore redundant options"
-	default y
-	depends on ACPID
-	help
-	  Accept and ignore compatibility options -g -m -s -S -v.
-
-config BLKID
-	bool "blkid"
-	default y
-	select PLATFORM_LINUX
-	select VOLUMEID
-	help
-	  Lists labels and UUIDs of all filesystems.
-	  WARNING:
-	  With all submodules selected, it will add ~8k to busybox.
-
-config FEATURE_BLKID_TYPE
-	bool "Print filesystem type"
-	default n
-	depends on BLKID
-	help
-	  Show TYPE="filesystem type"
-
-config DMESG
-	bool "dmesg"
-	default y
-	select PLATFORM_LINUX
-	help
-	  dmesg is used to examine or control the kernel ring buffer. When the
-	  Linux kernel prints messages to the system log, they are stored in
-	  the kernel ring buffer. You can use dmesg to print the kernel's ring
-	  buffer, clear the kernel ring buffer, change the size of the kernel
-	  ring buffer, and change the priority level at which kernel messages
-	  are also logged to the system console. Enable this option if you
-	  wish to enable the 'dmesg' utility.
-
-config FEATURE_DMESG_PRETTY
-	bool "Pretty dmesg output"
-	default y
-	depends on DMESG
-	help
-	  If you wish to scrub the syslog level from the output, say 'Y' here.
-	  The syslog level is a string prefixed to every line with the form
-	  "<#>".
-
-	  With this option you will see:
-	    # dmesg
-	    Linux version 2.6.17.4 .....
-	    BIOS-provided physical RAM map:
-	     BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
-
-	  Without this option you will see:
-	    # dmesg
-	    <5>Linux version 2.6.17.4 .....
-	    <6>BIOS-provided physical RAM map:
-	    <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
-
-config FBSET
-	bool "fbset"
-	default y
-	select PLATFORM_LINUX
-	help
-	  fbset is used to show or change the settings of a Linux frame buffer
-	  device. The frame buffer device provides a simple and unique
-	  interface to access a graphics display. Enable this option
-	  if you wish to enable the 'fbset' utility.
-
-config FEATURE_FBSET_FANCY
-	bool "Turn on extra fbset options"
-	default y
-	depends on FBSET
-	help
-	  This option enables extended fbset options, allowing one to set the
-	  framebuffer size, color depth, etc. interface to access a graphics
-	  display. Enable this option if you wish to enable extended fbset
-	  options.
-
-config FEATURE_FBSET_READMODE
-	bool "Turn on fbset readmode support"
-	default y
-	depends on FBSET
-	help
-	  This option allows fbset to read the video mode database stored by
-	  default as /etc/fb.modes, which can be used to set frame buffer
-	  device to pre-defined video modes.
-
-config FDFLUSH
-	bool "fdflush"
-	default y
-	select PLATFORM_LINUX
-	help
-	  fdflush is only needed when changing media on slightly-broken
-	  removable media drives. It is used to make Linux believe that a
-	  hardware disk-change switch has been actuated, which causes Linux to
-	  forget anything it has cached from the previous media. If you have
-	  such a slightly-broken drive, you will need to run fdflush every time
-	  you change a disk. Most people have working hardware and can safely
-	  leave this disabled.
-
-config FDFORMAT
-	bool "fdformat"
-	default y
-	select PLATFORM_LINUX
-	help
-	  fdformat is used to low-level format a floppy disk.
-
-config FDISK
-	bool "fdisk"
-	default y
-	select PLATFORM_LINUX
-	help
-	  The fdisk utility is used to divide hard disks into one or more
-	  logical disks, which are generally called partitions. This utility
-	  can be used to list and edit the set of partitions or BSD style
-	  'disk slices' that are defined on a hard drive.
-
-config FDISK_SUPPORT_LARGE_DISKS
-	bool "Support over 4GB disks"
-	default y
-	depends on FDISK
-	depends on !LFS   # with LFS no special code is needed
-	help
-	  Enable this option to support large disks > 4GB.
-
-config FEATURE_FDISK_WRITABLE
-	bool "Write support"
-	default y
-	depends on FDISK
-	help
-	  Enabling this option allows you to create or change a partition table
-	  and write those changes out to disk. If you leave this option
-	  disabled, you will only be able to view the partition table.
-
-config FEATURE_AIX_LABEL
-	bool "Support AIX disklabels"
-	default n
-	depends on FDISK && FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to create or change AIX disklabels.
-	  Most people can safely leave this option disabled.
-
-config FEATURE_SGI_LABEL
-	bool "Support SGI disklabels"
-	default n
-	depends on FDISK && FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to create or change SGI disklabels.
-	  Most people can safely leave this option disabled.
-
-config FEATURE_SUN_LABEL
-	bool "Support SUN disklabels"
-	default n
-	depends on FDISK && FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to create or change SUN disklabels.
-	  Most people can safely leave this option disabled.
-
-config FEATURE_OSF_LABEL
-	bool "Support BSD disklabels"
-	default n
-	depends on FDISK && FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to create or change BSD disklabels
-	  and define and edit BSD disk slices.
-
-config FEATURE_GPT_LABEL
-	bool "Support GPT disklabels"
-	default n
-	depends on FDISK && FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to view GUID Partition Table
-	  disklabels.
-
-config FEATURE_FDISK_ADVANCED
-	bool "Support expert mode"
-	default y
-	depends on FDISK && FEATURE_FDISK_WRITABLE
-	help
-	  Enabling this option allows you to do terribly unsafe things like
-	  define arbitrary drive geometry, move the beginning of data in a
-	  partition, and similarly evil things. Unless you have a very good
-	  reason you would be wise to leave this disabled.
-
-config FINDFS
-	bool "findfs"
-	default y
-	select PLATFORM_LINUX
-	select VOLUMEID
-	help
-	  Prints the name of a filesystem with given label or UUID.
-	  WARNING:
-	  With all submodules selected, it will add ~8k to busybox.
-
-config FLOCK
-	bool "flock"
-	default y
-	help
-	  Manage locks from shell scripts
-
-config FREERAMDISK
-	bool "freeramdisk"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Linux allows you to create ramdisks. This utility allows you to
-	  delete them and completely free all memory that was used for the
-	  ramdisk. For example, if you boot Linux into a ramdisk and later
-	  pivot_root, you may want to free the memory that is allocated to the
-	  ramdisk. If you have no use for freeing memory from a ramdisk, leave
-	  this disabled.
-
-config FSCK_MINIX
-	bool "fsck_minix"
-	default y
-	help
-	  The minix filesystem is a nice, small, compact, read-write filesystem
-	  with little overhead. It is not a journaling filesystem however and
-	  can experience corruption if it is not properly unmounted or if the
-	  power goes off in the middle of a write. This utility allows you to
-	  check for and attempt to repair any corruption that occurs to a minix
-	  filesystem.
-
-config MKFS_MINIX
-	bool "mkfs_minix"
-	default y
-	select PLATFORM_LINUX
-	help
-	  The minix filesystem is a nice, small, compact, read-write filesystem
-	  with little overhead. If you wish to be able to create minix
-	  filesystems this utility will do the job for you.
-
-config FEATURE_MINIX2
-	bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
-	default y
-	depends on FSCK_MINIX || MKFS_MINIX
-	help
-	  If you wish to be able to create version 2 minix filesystems, enable
-	  this. If you enabled 'mkfs_minix' then you almost certainly want to
-	  be using the version 2 filesystem support.
-
-config MKFS_REISER
-	bool "mkfs_reiser"
-	default n
-	select PLATFORM_LINUX
-	help
-	  Utility to create ReiserFS filesystems.
-	  Note: this applet needs a lot of testing and polishing.
-
-config GETOPT
-	bool "getopt"
-	default y
-	help
-	  The getopt utility is used to break up (parse) options in command
-	  lines to make it easy to write complex shell scripts that also check
-	  for legal (and illegal) options. If you want to write horribly
-	  complex shell scripts, or use some horribly complex shell script
-	  written by others, this utility may be for you. Most people will
-	  wisely leave this disabled.
-
-config FEATURE_GETOPT_LONG
-	bool "Support option -l"
-	default y if LONG_OPTS
-	depends on GETOPT
-	help
-	  Enable support for long options (option -l).
-
-config HEXDUMP
-	bool "hexdump"
-	default y
-	help
-	  The hexdump utility is used to display binary data in a readable
-	  way that is comparable to the output from most hex editors.
-
-config FEATURE_HEXDUMP_REVERSE
-	bool "Support -R, reverse of 'hexdump -Cv'"
-	default y
-	depends on HEXDUMP
-	help
-	  The hexdump utility is used to display binary data in an ascii
-	  readable way. This option creates binary data from an ascii input.
-	  NB: this option is non-standard. It's unwise to use it in scripts
-	  aimed to be portable.
-
-config HD
-	bool "hd"
-	default y
-	depends on HEXDUMP
-	help
-	  hd is an alias to hexdump -C.
-
-config HWCLOCK
-	bool "hwclock"
-	default y
-	select PLATFORM_LINUX
-	help
-	  The hwclock utility is used to read and set the hardware clock
-	  on a system. This is primarily used to set the current time on
-	  shutdown in the hardware clock, so the hardware will keep the
-	  correct time when Linux is _not_ running.
-
-config FEATURE_HWCLOCK_LONG_OPTIONS
-	bool "Support long options (--hctosys,...)"
-	default y
-	depends on HWCLOCK && LONG_OPTS
-	help
-	  By default, the hwclock utility only uses short options. If you
-	  are overly fond of its long options, such as --hctosys, --utc, etc)
-	  then enable this option.
-
-config FEATURE_HWCLOCK_ADJTIME_FHS
-	bool "Use FHS /var/lib/hwclock/adjtime"
-	default n  # util-linux-ng in Fedora 13 still uses /etc/adjtime
-	depends on HWCLOCK
-	help
-	  Starting with FHS 2.3, the adjtime state file is supposed to exist
-	  at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
-	  to use the FHS behavior, answer Y here, otherwise answer N for the
-	  classic /etc/adjtime path.
-
-	  pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
-
-config IPCRM
-	bool "ipcrm"
-	default y
-	help
-	  The ipcrm utility allows the removal of System V interprocess
-	  communication (IPC) objects and the associated data structures
-	  from the system.
-
-config IPCS
-	bool "ipcs"
-	default y
-	select PLATFORM_LINUX
-	help
-	  The ipcs utility is used to provide information on the currently
-	  allocated System V interprocess (IPC) objects in the system.
-
-config LOSETUP
-	bool "losetup"
-	default y
-	select PLATFORM_LINUX
-	help
-	  losetup is used to associate or detach a loop device with a regular
-	  file or block device, and to query the status of a loop device. This
-	  version does not currently support enabling data encryption.
-
-config LSPCI
-	bool "lspci"
-	default y
-	#select PLATFORM_LINUX
-	help
-	  lspci is a utility for displaying information about PCI buses in the
-	  system and devices connected to them.
-
-	  This version uses sysfs (/sys/bus/pci/devices) only.
-
-config LSUSB
-	bool "lsusb"
-	default y
-	#select PLATFORM_LINUX
-	help
-	  lsusb is a utility for displaying information about USB buses in the
-	  system and devices connected to them.
-
-	  This version uses sysfs (/sys/bus/usb/devices) only.
-
-config MKSWAP
-	bool "mkswap"
-	default y
-	help
-	  The mkswap utility is used to configure a file or disk partition as
-	  Linux swap space. This allows Linux to use the entire file or
-	  partition as if it were additional RAM, which can greatly increase
-	  the capability of low-memory machines. This additional memory is
-	  much slower than real RAM, but can be very helpful at preventing your
-	  applications being killed by the Linux out of memory (OOM) killer.
-	  Once you have created swap space using 'mkswap' you need to enable
-	  the swap space using the 'swapon' utility.
-
-config FEATURE_MKSWAP_UUID
-	bool "UUID support"
-	default y
-	depends on MKSWAP
-	help
-	  Generate swap spaces with universally unique identifiers.
-
-config MORE
-	bool "more"
-	default y
-	help
-	  more is a simple utility which allows you to read text one screen
-	  sized page at a time. If you want to read text that is larger than
-	  the screen, and you are using anything faster than a 300 baud modem,
-	  you will probably find this utility very helpful. If you don't have
-	  any need to reading text files, you can leave this disabled.
-
-config PIVOT_ROOT
-	bool "pivot_root"
-	default y
-	select PLATFORM_LINUX
-	help
-	  The pivot_root utility swaps the mount points for the root filesystem
-	  with some other mounted filesystem. This allows you to do all sorts
-	  of wild and crazy things with your Linux system and is far more
-	  powerful than 'chroot'.
-
-	  Note: This is for initrd in linux 2.4. Under initramfs (introduced
-	  in linux 2.6) use switch_root instead.
-
-config RDATE
-	bool "rdate"
-	default y
-	help
-	  The rdate utility allows you to synchronize the date and time of your
-	  system clock with the date and time of a remote networked system using
-	  the RFC868 protocol, which is built into the inetd daemon on most
-	  systems.
-
-config RDEV
-	bool "rdev"
-	default y
-	help
-	  Print the device node associated with the filesystem mounted at '/'.
-
-config READPROFILE
-	bool "readprofile"
-	default y
-	#select PLATFORM_LINUX
-	help
-	  This allows you to parse /proc/profile for basic profiling.
-
-config RTCWAKE
-	bool "rtcwake"
-	default y
-	select PLATFORM_LINUX
-	help
-	  Enter a system sleep state until specified wakeup time.
-
-config SCRIPT
-	bool "script"
-	default y
-	help
-	  The script makes typescript of terminal session.
-
-config SCRIPTREPLAY
-	bool "scriptreplay"
-	default y
-	help
-	  This program replays a typescript, using timing information
-	  given by script -t.
-
-config SWITCH_ROOT
-	bool "switch_root"
-	default y
-	select PLATFORM_LINUX
-	help
-	  The switch_root utility is used from initramfs to select a new
-	  root device. Under initramfs, you have to use this instead of
-	  pivot_root. (Stop reading here if you don't care why.)
-
-	  Booting with initramfs extracts a gzipped cpio archive into rootfs
-	  (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
-	  or unmounted*, pivot_root will not work from initramfs. Instead,
-	  switch_root deletes everything out of rootfs (including itself),
-	  does a mount --move that overmounts rootfs with the new root, and
-	  then execs the specified init program.
-
-	  * Because the Linux kernel uses rootfs internally as the starting
-	  and ending point for searching through the kernel's doubly linked
-	  list of active mount points. That's why.
-
-config UMOUNT
-	bool "umount"
-	default y
-	select PLATFORM_LINUX
-	help
-	  When you want to remove a mounted filesystem from its current mount
-	  point, for example when you are shutting down the system, the
-	  'umount' utility is the tool to use. If you enabled the 'mount'
-	  utility, you almost certainly also want to enable 'umount'.
-
-config FEATURE_UMOUNT_ALL
-	bool "Support option -a"
-	default y
-	depends on UMOUNT
-	help
-	  Support -a option to unmount all currently mounted filesystems.
-
 comment "Common options for mount/umount"
 	depends on MOUNT || UMOUNT
 
diff --git a/util-linux/Kbuild.src b/util-linux/Kbuild.src
index dfd50af..6b4fb74 100644
--- a/util-linux/Kbuild.src
+++ b/util-linux/Kbuild.src
@@ -7,36 +7,3 @@
 lib-y:=
 
 INSERT
-lib-$(CONFIG_ACPID)             += acpid.o
-lib-$(CONFIG_BLKID)             += blkid.o
-lib-$(CONFIG_DMESG)             += dmesg.o
-lib-$(CONFIG_FBSET)             += fbset.o
-lib-$(CONFIG_FDFLUSH)           += freeramdisk.o
-lib-$(CONFIG_FDFORMAT)          += fdformat.o
-lib-$(CONFIG_FDISK)             += fdisk.o
-lib-$(CONFIG_FINDFS)            += findfs.o
-lib-$(CONFIG_FLOCK)             += flock.o
-lib-$(CONFIG_FREERAMDISK)       += freeramdisk.o
-lib-$(CONFIG_FSCK_MINIX)        += fsck_minix.o
-lib-$(CONFIG_GETOPT)            += getopt.o
-lib-$(CONFIG_HEXDUMP)           += hexdump.o
-lib-$(CONFIG_HWCLOCK)           += hwclock.o
-lib-$(CONFIG_IPCRM)             += ipcrm.o
-lib-$(CONFIG_IPCS)              += ipcs.o
-lib-$(CONFIG_LOSETUP)           += losetup.o
-lib-$(CONFIG_LSPCI)             += lspci.o
-lib-$(CONFIG_LSUSB)             += lsusb.o
-lib-$(CONFIG_MKFS_MINIX)        += mkfs_minix.o
-lib-$(CONFIG_MKFS_REISER)       += mkfs_reiser.o
-lib-$(CONFIG_MKSWAP)            += mkswap.o
-lib-$(CONFIG_MORE)              += more.o
-lib-$(CONFIG_MOUNT)             += mount.o
-lib-$(CONFIG_PIVOT_ROOT)        += pivot_root.o
-lib-$(CONFIG_RDATE)             += rdate.o
-lib-$(CONFIG_RDEV)              += rdev.o
-lib-$(CONFIG_READPROFILE)       += readprofile.o
-lib-$(CONFIG_RTCWAKE)           += rtcwake.o
-lib-$(CONFIG_SCRIPT)            += script.o
-lib-$(CONFIG_SCRIPTREPLAY)      += scriptreplay.o
-lib-$(CONFIG_SWITCH_ROOT)       += switch_root.o
-lib-$(CONFIG_UMOUNT)            += umount.o
diff --git a/util-linux/acpid.c b/util-linux/acpid.c
index 0f2cb6b..3e68b61 100644
--- a/util-linux/acpid.c
+++ b/util-linux/acpid.c
@@ -6,6 +6,32 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
+//config:config ACPID
+//config:	bool "acpid"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  acpid listens to ACPI events coming either in textual form from
+//config:	  /proc/acpi/event (though it is marked deprecated it is still widely
+//config:	  used and _is_ a standard) or in binary form from specified evdevs
+//config:	  (just use /dev/input/event*).
+//config:
+//config:	  It parses the event to retrieve ACTION and a possible PARAMETER.
+//config:	  It then spawns /etc/acpi/<ACTION>[/<PARAMETER>] either via run-parts
+//config:	  (if the resulting path is a directory) or directly as an executable.
+//config:
+//config:	  N.B. acpid relies on run-parts so have the latter installed.
+//config:
+//config:config FEATURE_ACPID_COMPAT
+//config:	bool "Accept and ignore redundant options"
+//config:	default y
+//config:	depends on ACPID
+//config:	help
+//config:	  Accept and ignore compatibility options -g -m -s -S -v.
+
+//applet:IF_ACPID(APPLET(acpid, BB_DIR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_ACPID) += acpid.o
 
 //usage:#define acpid_trivial_usage
 //usage:       "[-df] [-c CONFDIR] [-l LOGFILE] [-a ACTIONFILE] [-M MAPFILE] [-e PROC_EVENT_FILE] [-p PIDFILE]"
diff --git a/util-linux/blkdiscard.c b/util-linux/blkdiscard.c
index ace88a1..af0bc94 100644
--- a/util-linux/blkdiscard.c
+++ b/util-linux/blkdiscard.c
@@ -5,7 +5,6 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
-
 //config:config BLKDISCARD
 //config:	bool "blkdiscard"
 //config:	default y
diff --git a/util-linux/blkid.c b/util-linux/blkid.c
index 1bbc803..b6f33b5 100644
--- a/util-linux/blkid.c
+++ b/util-linux/blkid.c
@@ -6,6 +6,26 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
+//config:config BLKID
+//config:	bool "blkid"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	select VOLUMEID
+//config:	help
+//config:	  Lists labels and UUIDs of all filesystems.
+//config:	  WARNING:
+//config:	  With all submodules selected, it will add ~8k to busybox.
+//config:
+//config:config FEATURE_BLKID_TYPE
+//config:	bool "Print filesystem type"
+//config:	default n
+//config:	depends on BLKID
+//config:	help
+//config:	  Show TYPE="filesystem type"
+
+//applet:IF_BLKID(APPLET(blkid, BB_DIR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_BLKID) += blkid.o
 
 //usage:#define blkid_trivial_usage
 //usage:       "[BLOCKDEV]..."
diff --git a/util-linux/blockdev.c b/util-linux/blockdev.c
index e25e529..bf4d497 100644
--- a/util-linux/blockdev.c
+++ b/util-linux/blockdev.c
@@ -5,17 +5,16 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
-
-//applet:IF_BLOCKDEV(APPLET(blockdev, BB_DIR_SBIN, BB_SUID_DROP))
-
-//kbuild:lib-$(CONFIG_BLOCKDEV) += blockdev.o
-
 //config:config BLOCKDEV
 //config:	bool "blockdev"
 //config:	default y
 //config:	help
 //config:	  Performs some ioctls with block devices.
 
+//applet:IF_BLOCKDEV(APPLET(blockdev, BB_DIR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_BLOCKDEV) += blockdev.o
+
 //usage:#define blockdev_trivial_usage
 //usage:	"OPTION BLOCKDEV"
 //usage:#define blockdev_full_usage "\n\n"
diff --git a/util-linux/dmesg.c b/util-linux/dmesg.c
index 50e8a0f..b7b2c69 100644
--- a/util-linux/dmesg.c
+++ b/util-linux/dmesg.c
@@ -8,6 +8,43 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
+//config:config DMESG
+//config:	bool "dmesg"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  dmesg is used to examine or control the kernel ring buffer. When the
+//config:	  Linux kernel prints messages to the system log, they are stored in
+//config:	  the kernel ring buffer. You can use dmesg to print the kernel's ring
+//config:	  buffer, clear the kernel ring buffer, change the size of the kernel
+//config:	  ring buffer, and change the priority level at which kernel messages
+//config:	  are also logged to the system console. Enable this option if you
+//config:	  wish to enable the 'dmesg' utility.
+//config:
+//config:config FEATURE_DMESG_PRETTY
+//config:	bool "Pretty dmesg output"
+//config:	default y
+//config:	depends on DMESG
+//config:	help
+//config:	  If you wish to scrub the syslog level from the output, say 'Y' here.
+//config:	  The syslog level is a string prefixed to every line with the form
+//config:	  "<#>".
+//config:
+//config:	  With this option you will see:
+//config:	    # dmesg
+//config:	    Linux version 2.6.17.4 .....
+//config:	    BIOS-provided physical RAM map:
+//config:	     BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+//config:
+//config:	  Without this option you will see:
+//config:	    # dmesg
+//config:	    <5>Linux version 2.6.17.4 .....
+//config:	    <6>BIOS-provided physical RAM map:
+//config:	    <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+
+//applet:IF_DMESG(APPLET(dmesg, BB_DIR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_DMESG) += dmesg.o
 
 //usage:#define dmesg_trivial_usage
 //usage:       "[-c] [-n LEVEL] [-s SIZE]"
diff --git a/util-linux/fatattr.c b/util-linux/fatattr.c
index 6dca24a..030978f 100644
--- a/util-linux/fatattr.c
+++ b/util-linux/fatattr.c
@@ -16,6 +16,7 @@
 //config:	  fatattr lists or changes the file attributes on a fat file system.
 
 //applet:IF_FATATTR(APPLET(fatattr, BB_DIR_BIN, BB_SUID_DROP))
+
 //kbuild:lib-$(CONFIG_FATATTR) += fatattr.o
 
 //usage:#define fatattr_trivial_usage
diff --git a/util-linux/fbset.c b/util-linux/fbset.c
index b75ec19..8a78c1e 100644
--- a/util-linux/fbset.c
+++ b/util-linux/fbset.c
@@ -11,6 +11,38 @@
  * the GPL, and is (c) 1995-1999 by:
  *     Geert Uytterhoeven (Geert.Uytterhoeven@cs.kuleuven.ac.be)
  */
+//config:config FBSET
+//config:	bool "fbset"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  fbset is used to show or change the settings of a Linux frame buffer
+//config:	  device. The frame buffer device provides a simple and unique
+//config:	  interface to access a graphics display. Enable this option
+//config:	  if you wish to enable the 'fbset' utility.
+//config:
+//config:config FEATURE_FBSET_FANCY
+//config:	bool "Turn on extra fbset options"
+//config:	default y
+//config:	depends on FBSET
+//config:	help
+//config:	  This option enables extended fbset options, allowing one to set the
+//config:	  framebuffer size, color depth, etc. interface to access a graphics
+//config:	  display. Enable this option if you wish to enable extended fbset
+//config:	  options.
+//config:
+//config:config FEATURE_FBSET_READMODE
+//config:	bool "Turn on fbset readmode support"
+//config:	default y
+//config:	depends on FBSET
+//config:	help
+//config:	  This option allows fbset to read the video mode database stored by
+//config:	  default as /etc/fb.modes, which can be used to set frame buffer
+//config:	  device to pre-defined video modes.
+
+//applet:IF_FBSET(APPLET(fbset, BB_DIR_USR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_FBSET) += fbset.o
 
 //usage:#define fbset_trivial_usage
 //usage:       "[OPTIONS] [MODE]"
diff --git a/util-linux/fdformat.c b/util-linux/fdformat.c
index 6ef6445..67c6e15 100644
--- a/util-linux/fdformat.c
+++ b/util-linux/fdformat.c
@@ -4,6 +4,16 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
+//config:config FDFORMAT
+//config:	bool "fdformat"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  fdformat is used to low-level format a floppy disk.
+
+//applet:IF_FDFORMAT(APPLET(fdformat, BB_DIR_USR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_FDFORMAT) += fdformat.o
 
 //usage:#define fdformat_trivial_usage
 //usage:       "[-n] DEVICE"
diff --git a/util-linux/fdisk.c b/util-linux/fdisk.c
index 32a66d0..af80735 100644
--- a/util-linux/fdisk.c
+++ b/util-linux/fdisk.c
@@ -6,6 +6,86 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
+//config:config FDISK
+//config:	bool "fdisk"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  The fdisk utility is used to divide hard disks into one or more
+//config:	  logical disks, which are generally called partitions. This utility
+//config:	  can be used to list and edit the set of partitions or BSD style
+//config:	  'disk slices' that are defined on a hard drive.
+//config:
+//config:config FDISK_SUPPORT_LARGE_DISKS
+//config:	bool "Support over 4GB disks"
+//config:	default y
+//config:	depends on FDISK
+//config:	depends on !LFS   # with LFS no special code is needed
+//config:	help
+//config:	  Enable this option to support large disks > 4GB.
+//config:
+//config:config FEATURE_FDISK_WRITABLE
+//config:	bool "Write support"
+//config:	default y
+//config:	depends on FDISK
+//config:	help
+//config:	  Enabling this option allows you to create or change a partition table
+//config:	  and write those changes out to disk. If you leave this option
+//config:	  disabled, you will only be able to view the partition table.
+//config:
+//config:config FEATURE_AIX_LABEL
+//config:	bool "Support AIX disklabels"
+//config:	default n
+//config:	depends on FDISK && FEATURE_FDISK_WRITABLE
+//config:	help
+//config:	  Enabling this option allows you to create or change AIX disklabels.
+//config:	  Most people can safely leave this option disabled.
+//config:
+//config:config FEATURE_SGI_LABEL
+//config:	bool "Support SGI disklabels"
+//config:	default n
+//config:	depends on FDISK && FEATURE_FDISK_WRITABLE
+//config:	help
+//config:	  Enabling this option allows you to create or change SGI disklabels.
+//config:	  Most people can safely leave this option disabled.
+//config:
+//config:config FEATURE_SUN_LABEL
+//config:	bool "Support SUN disklabels"
+//config:	default n
+//config:	depends on FDISK && FEATURE_FDISK_WRITABLE
+//config:	help
+//config:	  Enabling this option allows you to create or change SUN disklabels.
+//config:	  Most people can safely leave this option disabled.
+//config:
+//config:config FEATURE_OSF_LABEL
+//config:	bool "Support BSD disklabels"
+//config:	default n
+//config:	depends on FDISK && FEATURE_FDISK_WRITABLE
+//config:	help
+//config:	  Enabling this option allows you to create or change BSD disklabels
+//config:	  and define and edit BSD disk slices.
+//config:
+//config:config FEATURE_GPT_LABEL
+//config:	bool "Support GPT disklabels"
+//config:	default n
+//config:	depends on FDISK && FEATURE_FDISK_WRITABLE
+//config:	help
+//config:	  Enabling this option allows you to view GUID Partition Table
+//config:	  disklabels.
+//config:
+//config:config FEATURE_FDISK_ADVANCED
+//config:	bool "Support expert mode"
+//config:	default y
+//config:	depends on FDISK && FEATURE_FDISK_WRITABLE
+//config:	help
+//config:	  Enabling this option allows you to do terribly unsafe things like
+//config:	  define arbitrary drive geometry, move the beginning of data in a
+//config:	  partition, and similarly evil things. Unless you have a very good
+//config:	  reason you would be wise to leave this disabled.
+
+//applet:IF_FDISK(APPLET(fdisk, BB_DIR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_FDISK) += fdisk.o
 
 /* Looks like someone forgot to add this to config system */
 //usage:#ifndef ENABLE_FEATURE_FDISK_BLKSIZE
diff --git a/util-linux/findfs.c b/util-linux/findfs.c
index 07734f3..daa46b0 100644
--- a/util-linux/findfs.c
+++ b/util-linux/findfs.c
@@ -7,6 +7,20 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
+//config:config FINDFS
+//config:	bool "findfs"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	select VOLUMEID
+//config:	help
+//config:	  Prints the name of a filesystem with given label or UUID.
+//config:	  WARNING:
+//config:	  With all submodules selected, it will add ~8k to busybox.
+
+/* Benefits from suid root: better access to /dev/BLOCKDEVs: */
+//applet:IF_FINDFS(APPLET(findfs, BB_DIR_SBIN, BB_SUID_MAYBE))
+
+//kbuild:lib-$(CONFIG_FINDFS) += findfs.o
 
 //usage:#define findfs_trivial_usage
 //usage:       "LABEL=label or UUID=uuid"
diff --git a/util-linux/flock.c b/util-linux/flock.c
index 1f7ade7..f34c0ad 100644
--- a/util-linux/flock.c
+++ b/util-linux/flock.c
@@ -3,6 +3,15 @@
  *
  * This is free software, licensed under the GNU General Public License v2.
  */
+//config:config FLOCK
+//config:	bool "flock"
+//config:	default y
+//config:	help
+//config:	  Manage locks from shell scripts
+
+//applet:IF_FLOCK(APPLET(flock, BB_DIR_USR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_FLOCK) += flock.o
 
 //usage:#define flock_trivial_usage
 //usage:       "[-sxun] FD|{FILE [-c] PROG ARGS}"
diff --git a/util-linux/freeramdisk.c b/util-linux/freeramdisk.c
index a89ae1a..8bc2c44 100644
--- a/util-linux/freeramdisk.c
+++ b/util-linux/freeramdisk.c
@@ -8,6 +8,36 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
+//config:config FDFLUSH
+//config:	bool "fdflush"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  fdflush is only needed when changing media on slightly-broken
+//config:	  removable media drives. It is used to make Linux believe that a
+//config:	  hardware disk-change switch has been actuated, which causes Linux to
+//config:	  forget anything it has cached from the previous media. If you have
+//config:	  such a slightly-broken drive, you will need to run fdflush every time
+//config:	  you change a disk. Most people have working hardware and can safely
+//config:	  leave this disabled.
+//config:
+//config:config FREERAMDISK
+//config:	bool "freeramdisk"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  Linux allows you to create ramdisks. This utility allows you to
+//config:	  delete them and completely free all memory that was used for the
+//config:	  ramdisk. For example, if you boot Linux into a ramdisk and later
+//config:	  pivot_root, you may want to free the memory that is allocated to the
+//config:	  ramdisk. If you have no use for freeing memory from a ramdisk, leave
+//config:	  this disabled.
+
+//applet:IF_FDFLUSH(APPLET_ODDNAME(fdflush, freeramdisk, BB_DIR_BIN, BB_SUID_DROP, fdflush))
+//applet:IF_FREERAMDISK(APPLET(freeramdisk, BB_DIR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_FDFLUSH) += freeramdisk.o
+//kbuild:lib-$(CONFIG_FREERAMDISK) += freeramdisk.o
 
 //usage:#define freeramdisk_trivial_usage
 //usage:       "DEVICE"
diff --git a/util-linux/fsck_minix.c b/util-linux/fsck_minix.c
index d2f3524..0eaac17 100644
--- a/util-linux/fsck_minix.c
+++ b/util-linux/fsck_minix.c
@@ -85,6 +85,20 @@
  * The device may be a block device or a image of one, but this isn't
  * enforced (but it's not much fun on a character device :-).
  */
+//config:config FSCK_MINIX
+//config:	bool "fsck_minix"
+//config:	default y
+//config:	help
+//config:	  The minix filesystem is a nice, small, compact, read-write filesystem
+//config:	  with little overhead. It is not a journaling filesystem however and
+//config:	  can experience corruption if it is not properly unmounted or if the
+//config:	  power goes off in the middle of a write. This utility allows you to
+//config:	  check for and attempt to repair any corruption that occurs to a minix
+//config:	  filesystem.
+
+//applet:IF_FSCK_MINIX(APPLET_ODDNAME(fsck.minix, fsck_minix, BB_DIR_SBIN, BB_SUID_DROP, fsck_minix))
+
+//kbuild:lib-$(CONFIG_FSCK_MINIX) += fsck_minix.o
 
 //usage:#define fsck_minix_trivial_usage
 //usage:       "[-larvsmf] BLOCKDEV"
diff --git a/util-linux/getopt.c b/util-linux/getopt.c
index 18d4909..83cc1ef 100644
--- a/util-linux/getopt.c
+++ b/util-linux/getopt.c
@@ -28,8 +28,28 @@
  *  Removed --version/-V and --help/-h
  *  Removed parse_error(), using bb_error_msg() from Busybox instead
  *  Replaced our_malloc with xmalloc and our_realloc with xrealloc
- *
  */
+//config:config GETOPT
+//config:	bool "getopt"
+//config:	default y
+//config:	help
+//config:	  The getopt utility is used to break up (parse) options in command
+//config:	  lines to make it easy to write complex shell scripts that also check
+//config:	  for legal (and illegal) options. If you want to write horribly
+//config:	  complex shell scripts, or use some horribly complex shell script
+//config:	  written by others, this utility may be for you. Most people will
+//config:	  wisely leave this disabled.
+//config:
+//config:config FEATURE_GETOPT_LONG
+//config:	bool "Support option -l"
+//config:	default y if LONG_OPTS
+//config:	depends on GETOPT
+//config:	help
+//config:	  Enable support for long options (option -l).
+
+//applet:IF_GETOPT(APPLET(getopt, BB_DIR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_GETOPT) += getopt.o
 
 //usage:#define getopt_trivial_usage
 //usage:       "[OPTIONS] [--] OPTSTRING PARAMS"
diff --git a/util-linux/hexdump.c b/util-linux/hexdump.c
index ac7e24f..5e1ef69 100644
--- a/util-linux/hexdump.c
+++ b/util-linux/hexdump.c
@@ -8,6 +8,35 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
+//config:config HEXDUMP
+//config:	bool "hexdump"
+//config:	default y
+//config:	help
+//config:	  The hexdump utility is used to display binary data in a readable
+//config:	  way that is comparable to the output from most hex editors.
+//config:
+//config:config FEATURE_HEXDUMP_REVERSE
+//config:	bool "Support -R, reverse of 'hexdump -Cv'"
+//config:	default y
+//config:	depends on HEXDUMP
+//config:	help
+//config:	  The hexdump utility is used to display binary data in an ascii
+//config:	  readable way. This option creates binary data from an ascii input.
+//config:	  NB: this option is non-standard. It's unwise to use it in scripts
+//config:	  aimed to be portable.
+//config:
+//config:config HD
+//config:	bool "hd"
+//config:	default y
+//config:	depends on HEXDUMP
+//config:	help
+//config:	  hd is an alias to hexdump -C.
+
+//applet:IF_HEXDUMP(APPLET_NOEXEC(hexdump, hexdump, BB_DIR_USR_BIN, BB_SUID_DROP, hexdump))
+//applet:IF_HD(APPLET_NOEXEC(hd, hexdump, BB_DIR_USR_BIN, BB_SUID_DROP, hd))
+
+//kbuild:lib-$(CONFIG_HEXDUMP) += hexdump.o
+//kbuild:lib-$(CONFIG_HD) += hexdump.o
 
 //usage:#define hexdump_trivial_usage
 //usage:       "[-bcCdefnosvx" IF_FEATURE_HEXDUMP_REVERSE("R") "] [FILE]..."
diff --git a/util-linux/hwclock.c b/util-linux/hwclock.c
index 6c99977..084a7f1 100644
--- a/util-linux/hwclock.c
+++ b/util-linux/hwclock.c
@@ -5,7 +5,41 @@
  * Copyright (C) 2002 Robert Griebl <griebl@gmx.de>
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
-*/
+ */
+//config:config HWCLOCK
+//config:	bool "hwclock"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  The hwclock utility is used to read and set the hardware clock
+//config:	  on a system. This is primarily used to set the current time on
+//config:	  shutdown in the hardware clock, so the hardware will keep the
+//config:	  correct time when Linux is _not_ running.
+//config:
+//config:config FEATURE_HWCLOCK_LONG_OPTIONS
+//config:	bool "Support long options (--hctosys,...)"
+//config:	default y
+//config:	depends on HWCLOCK && LONG_OPTS
+//config:	help
+//config:	  By default, the hwclock utility only uses short options. If you
+//config:	  are overly fond of its long options, such as --hctosys, --utc, etc)
+//config:	  then enable this option.
+//config:
+//config:config FEATURE_HWCLOCK_ADJTIME_FHS
+//config:	bool "Use FHS /var/lib/hwclock/adjtime"
+//config:	default n  # util-linux-ng in Fedora 13 still uses /etc/adjtime
+//config:	depends on HWCLOCK
+//config:	help
+//config:	  Starting with FHS 2.3, the adjtime state file is supposed to exist
+//config:	  at /var/lib/hwclock/adjtime instead of /etc/adjtime. If you wish
+//config:	  to use the FHS behavior, answer Y here, otherwise answer N for the
+//config:	  classic /etc/adjtime path.
+//config:
+//config:	  pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+
+//applet:IF_HWCLOCK(APPLET(hwclock, BB_DIR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_HWCLOCK) += hwclock.o
 
 #include "libbb.h"
 /* After libbb.h, since it needs sys/types.h on some systems */
diff --git a/util-linux/ipcrm.c b/util-linux/ipcrm.c
index 38d81af..76ea3ca 100644
--- a/util-linux/ipcrm.c
+++ b/util-linux/ipcrm.c
@@ -7,6 +7,17 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
+//config:config IPCRM
+//config:	bool "ipcrm"
+//config:	default y
+//config:	help
+//config:	  The ipcrm utility allows the removal of System V interprocess
+//config:	  communication (IPC) objects and the associated data structures
+//config:	  from the system.
+
+//applet:IF_IPCRM(APPLET(ipcrm, BB_DIR_USR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_IPCRM) += ipcrm.o
 
 //usage:#define ipcrm_trivial_usage
 //usage:       "[-MQS key] [-mqs id]"
diff --git a/util-linux/ipcs.c b/util-linux/ipcs.c
index 67a25a8..88ae922 100644
--- a/util-linux/ipcs.c
+++ b/util-linux/ipcs.c
@@ -7,6 +7,17 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
+//config:config IPCS
+//config:	bool "ipcs"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  The ipcs utility is used to provide information on the currently
+//config:	  allocated System V interprocess (IPC) objects in the system.
+
+//applet:IF_IPCS(APPLET(ipcs, BB_DIR_USR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_IPCS) += ipcs.o
 
 //usage:#define ipcs_trivial_usage
 //usage:       "[[-smq] -i shmid] | [[-asmq] [-tcplu]]"
diff --git a/util-linux/losetup.c b/util-linux/losetup.c
index d450b5a..4424d9c 100644
--- a/util-linux/losetup.c
+++ b/util-linux/losetup.c
@@ -6,6 +6,18 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
+//config:config LOSETUP
+//config:	bool "losetup"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  losetup is used to associate or detach a loop device with a regular
+//config:	  file or block device, and to query the status of a loop device. This
+//config:	  version does not currently support enabling data encryption.
+
+//kbuild:lib-$(CONFIG_LOSETUP) += losetup.o
+
+//applet:IF_LOSETUP(APPLET(losetup, BB_DIR_SBIN, BB_SUID_DROP))
 
 //usage:#define losetup_trivial_usage
 //usage:       "[-r] [-o OFS] {-f|LOOPDEV} FILE - associate loop devices\n"
diff --git a/util-linux/lspci.c b/util-linux/lspci.c
index 514678a..8b38a23 100644
--- a/util-linux/lspci.c
+++ b/util-linux/lspci.c
@@ -6,6 +6,19 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
+//config:config LSPCI
+//config:	bool "lspci"
+//config:	default y
+//config:	#select PLATFORM_LINUX
+//config:	help
+//config:	  lspci is a utility for displaying information about PCI buses in the
+//config:	  system and devices connected to them.
+//config:
+//config:	  This version uses sysfs (/sys/bus/pci/devices) only.
+
+//applet:IF_LSPCI(APPLET(lspci, BB_DIR_USR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_LSPCI) += lspci.o
 
 //usage:#define lspci_trivial_usage
 //usage:       "[-mk]"
diff --git a/util-linux/lsusb.c b/util-linux/lsusb.c
index 540f21e..7d36d6f 100644
--- a/util-linux/lsusb.c
+++ b/util-linux/lsusb.c
@@ -6,6 +6,19 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
+//config:config LSUSB
+//config:	bool "lsusb"
+//config:	default y
+//config:	#select PLATFORM_LINUX
+//config:	help
+//config:	  lsusb is a utility for displaying information about USB buses in the
+//config:	  system and devices connected to them.
+//config:
+//config:	  This version uses sysfs (/sys/bus/usb/devices) only.
+
+//applet:IF_LSUSB(APPLET(lsusb, BB_DIR_USR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_LSUSB) += lsusb.o
 
 //usage:#define lsusb_trivial_usage NOUSAGE_STR
 //usage:#define lsusb_full_usage ""
diff --git a/util-linux/mkfs_minix.c b/util-linux/mkfs_minix.c
index aaabf84..912246b 100644
--- a/util-linux/mkfs_minix.c
+++ b/util-linux/mkfs_minix.c
@@ -62,6 +62,27 @@
  * Modified for BusyBox by Erik Andersen <andersen@debian.org> --
  *	removed getopt based parser and added a hand rolled one.
  */
+//config:config MKFS_MINIX
+//config:	bool "mkfs_minix"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  The minix filesystem is a nice, small, compact, read-write filesystem
+//config:	  with little overhead. If you wish to be able to create minix
+//config:	  filesystems this utility will do the job for you.
+//config:
+//config:config FEATURE_MINIX2
+//config:	bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
+//config:	default y
+//config:	depends on FSCK_MINIX || MKFS_MINIX
+//config:	help
+//config:	  If you wish to be able to create version 2 minix filesystems, enable
+//config:	  this. If you enabled 'mkfs_minix' then you almost certainly want to
+//config:	  be using the version 2 filesystem support.
+
+//applet:IF_MKFS_MINIX(APPLET_ODDNAME(mkfs.minix, mkfs_minix, BB_DIR_SBIN, BB_SUID_DROP, mkfs_minix))
+
+//kbuild:lib-$(CONFIG_MKFS_MINIX) += mkfs_minix.o
 
 //usage:#define mkfs_minix_trivial_usage
 //usage:       "[-c | -l FILE] [-nXX] [-iXX] BLOCKDEV [KBYTES]"
diff --git a/util-linux/mkfs_reiser.c b/util-linux/mkfs_reiser.c
index 0a31ee4..d01119f 100644
--- a/util-linux/mkfs_reiser.c
+++ b/util-linux/mkfs_reiser.c
@@ -6,6 +6,17 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
+//config:config MKFS_REISER
+//config:	bool "mkfs_reiser"
+//config:	default n
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  Utility to create ReiserFS filesystems.
+//config:	  Note: this applet needs a lot of testing and polishing.
+
+//applet:IF_MKFS_REISER(APPLET_ODDNAME(mkfs.reiser, mkfs_reiser, BB_DIR_SBIN, BB_SUID_DROP, mkfs_reiser))
+
+//kbuild:lib-$(CONFIG_MKFS_REISER) += mkfs_reiser.o
 
 //usage:#define mkfs_reiser_trivial_usage
 //usage:       "[-f] [-l LABEL] BLOCKDEV [4K-BLOCKS]"
diff --git a/util-linux/mkswap.c b/util-linux/mkswap.c
index dcb53f0..954a194 100644
--- a/util-linux/mkswap.c
+++ b/util-linux/mkswap.c
@@ -5,6 +5,29 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
+//config:config MKSWAP
+//config:	bool "mkswap"
+//config:	default y
+//config:	help
+//config:	  The mkswap utility is used to configure a file or disk partition as
+//config:	  Linux swap space. This allows Linux to use the entire file or
+//config:	  partition as if it were additional RAM, which can greatly increase
+//config:	  the capability of low-memory machines. This additional memory is
+//config:	  much slower than real RAM, but can be very helpful at preventing your
+//config:	  applications being killed by the Linux out of memory (OOM) killer.
+//config:	  Once you have created swap space using 'mkswap' you need to enable
+//config:	  the swap space using the 'swapon' utility.
+//config:
+//config:config FEATURE_MKSWAP_UUID
+//config:	bool "UUID support"
+//config:	default y
+//config:	depends on MKSWAP
+//config:	help
+//config:	  Generate swap spaces with universally unique identifiers.
+
+//applet:IF_MKSWAP(APPLET(mkswap, BB_DIR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_MKSWAP) += mkswap.o
 
 //usage:#define mkswap_trivial_usage
 //usage:       "[-L LBL] BLOCKDEV [KBYTES]"
diff --git a/util-linux/more.c b/util-linux/more.c
index 07836e2..934b30f 100644
--- a/util-linux/more.c
+++ b/util-linux/more.c
@@ -13,6 +13,19 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
+//config:config MORE
+//config:	bool "more"
+//config:	default y
+//config:	help
+//config:	  more is a simple utility which allows you to read text one screen
+//config:	  sized page at a time. If you want to read text that is larger than
+//config:	  the screen, and you are using anything faster than a 300 baud modem,
+//config:	  you will probably find this utility very helpful. If you don't have
+//config:	  any need to reading text files, you can leave this disabled.
+
+//applet:IF_MORE(APPLET(more, BB_DIR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_MORE) += more.o
 
 //usage:#define more_trivial_usage
 //usage:       "[FILE]..."
diff --git a/util-linux/mount.c b/util-linux/mount.c
index eb8b7ba..42962b8 100644
--- a/util-linux/mount.c
+++ b/util-linux/mount.c
@@ -112,6 +112,14 @@
 //config:	help
 //config:	  Support mount -T (specifying an alternate fstab)
 
+/* On full-blown systems, requires suid for user mounts.
+ * But it's not unthinkable to have it available in non-suid flavor on some systems,
+ * for viewing mount table.
+ * Therefore we use BB_SUID_MAYBE instead of BB_SUID_REQUIRE: */
+//applet:IF_MOUNT(APPLET(mount, BB_DIR_BIN, IF_DESKTOP(BB_SUID_MAYBE) IF_NOT_DESKTOP(BB_SUID_DROP)))
+
+//kbuild:lib-$(CONFIG_MOUNT) += mount.o
+
 //usage:#define mount_trivial_usage
 //usage:       "[OPTIONS] [-o OPT] DEVICE NODE"
 //usage:#define mount_full_usage "\n\n"
diff --git a/util-linux/pivot_root.c b/util-linux/pivot_root.c
index 83f01fa..9bdae50 100644
--- a/util-linux/pivot_root.c
+++ b/util-linux/pivot_root.c
@@ -8,6 +8,22 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
+//config:config PIVOT_ROOT
+//config:	bool "pivot_root"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  The pivot_root utility swaps the mount points for the root filesystem
+//config:	  with some other mounted filesystem. This allows you to do all sorts
+//config:	  of wild and crazy things with your Linux system and is far more
+//config:	  powerful than 'chroot'.
+//config:
+//config:	  Note: This is for initrd in linux 2.4. Under initramfs (introduced
+//config:	  in linux 2.6) use switch_root instead.
+
+//applet:IF_PIVOT_ROOT(APPLET(pivot_root, BB_DIR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_PIVOT_ROOT) += pivot_root.o
 
 //usage:#define pivot_root_trivial_usage
 //usage:       "NEW_ROOT PUT_OLD"
diff --git a/util-linux/rdate.c b/util-linux/rdate.c
index 8075ef6..8dd784d 100644
--- a/util-linux/rdate.c
+++ b/util-linux/rdate.c
@@ -6,7 +6,19 @@
  * by Sterling Huxley <sterling@europa.com>
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
-*/
+ */
+//config:config RDATE
+//config:	bool "rdate"
+//config:	default y
+//config:	help
+//config:	  The rdate utility allows you to synchronize the date and time of your
+//config:	  system clock with the date and time of a remote networked system using
+//config:	  the RFC868 protocol, which is built into the inetd daemon on most
+//config:	  systems.
+
+//applet:IF_RDATE(APPLET(rdate, BB_DIR_USR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_RDATE) += rdate.o
 
 //usage:#define rdate_trivial_usage
 //usage:       "[-sp] HOST"
diff --git a/util-linux/rdev.c b/util-linux/rdev.c
index 4652817..0e1578e 100644
--- a/util-linux/rdev.c
+++ b/util-linux/rdev.c
@@ -8,6 +8,15 @@
  * Licensed under GPLv2, see file LICENSE in this source tree.
  *
  */
+//config:config RDEV
+//config:	bool "rdev"
+//config:	default y
+//config:	help
+//config:	  Print the device node associated with the filesystem mounted at '/'.
+
+//applet:IF_RDEV(APPLET(rdev, BB_DIR_USR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_RDEV) += rdev.o
 
 //usage:#define rdev_trivial_usage
 //usage:       ""
diff --git a/util-linux/readprofile.c b/util-linux/readprofile.c
index 345b676..d523038 100644
--- a/util-linux/readprofile.c
+++ b/util-linux/readprofile.c
@@ -31,6 +31,16 @@
  * Taken from util-linux and adapted for busybox by
  * Paul Mundt <lethal@linux-sh.org>.
  */
+//config:config READPROFILE
+//config:	bool "readprofile"
+//config:	default y
+//config:	#select PLATFORM_LINUX
+//config:	help
+//config:	  This allows you to parse /proc/profile for basic profiling.
+
+//applet:IF_READPROFILE(APPLET(readprofile, BB_DIR_USR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_READPROFILE) += readprofile.o
 
 //usage:#define readprofile_trivial_usage
 //usage:       "[OPTIONS]"
diff --git a/util-linux/rev.c b/util-linux/rev.c
index 3c1b22f..c225053 100644
--- a/util-linux/rev.c
+++ b/util-linux/rev.c
@@ -5,17 +5,16 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
-
-//applet:IF_REV(APPLET(rev, BB_DIR_BIN, BB_SUID_DROP))
-
-//kbuild:lib-$(CONFIG_REV) += rev.o
-
 //config:config REV
 //config:	bool "rev"
 //config:	default y
 //config:	help
 //config:	  Reverse lines of a file or files.
 
+//applet:IF_REV(APPLET(rev, BB_DIR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_REV) += rev.o
+
 //usage:#define rev_trivial_usage
 //usage:	"[FILE]..."
 //usage:#define rev_full_usage "\n\n"
diff --git a/util-linux/rtcwake.c b/util-linux/rtcwake.c
index 8aee0cf..54fc705 100644
--- a/util-linux/rtcwake.c
+++ b/util-linux/rtcwake.c
@@ -22,6 +22,16 @@
  * RTC uses a local timezone instead (maybe you dual-boot MS-Windows).
  * That flag should not be needed on systems with adjtime support.
  */
+//config:config RTCWAKE
+//config:	bool "rtcwake"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  Enter a system sleep state until specified wakeup time.
+
+//applet:IF_RTCWAKE(APPLET(rtcwake, BB_DIR_USR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_RTCWAKE) += rtcwake.o
 
 //usage:#define rtcwake_trivial_usage
 //usage:       "[-a | -l | -u] [-d DEV] [-m MODE] [-s SEC | -t TIME]"
diff --git a/util-linux/script.c b/util-linux/script.c
index 86475c1..c5063e8 100644
--- a/util-linux/script.c
+++ b/util-linux/script.c
@@ -10,6 +10,15 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
+//config:config SCRIPT
+//config:	bool "script"
+//config:	default y
+//config:	help
+//config:	  The script makes typescript of terminal session.
+
+//applet:IF_SCRIPT(APPLET(script, BB_DIR_USR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_SCRIPT) += script.o
 
 //usage:#define script_trivial_usage
 //usage:       "[-afq" IF_SCRIPTREPLAY("t") "] [-c PROG] [OUTFILE]"
diff --git a/util-linux/scriptreplay.c b/util-linux/scriptreplay.c
index 382f56d..8a0c748 100644
--- a/util-linux/scriptreplay.c
+++ b/util-linux/scriptreplay.c
@@ -7,6 +7,16 @@
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  *
  */
+//config:config SCRIPTREPLAY
+//config:	bool "scriptreplay"
+//config:	default y
+//config:	help
+//config:	  This program replays a typescript, using timing information
+//config:	  given by script -t.
+
+//applet:IF_SCRIPTREPLAY(APPLET(scriptreplay, BB_DIR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_SCRIPTREPLAY) += scriptreplay.o
 
 //usage:#define scriptreplay_trivial_usage
 //usage:       "timingfile [typescript [divisor]]"
diff --git a/util-linux/swaponoff.c b/util-linux/swaponoff.c
index 0a2d23f..b8f4e94 100644
--- a/util-linux/swaponoff.c
+++ b/util-linux/swaponoff.c
@@ -6,7 +6,6 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
-
 //config:config SWAPON
 //config:	bool "swapon"
 //config:	default y
diff --git a/util-linux/switch_root.c b/util-linux/switch_root.c
index 7960b67..6034485 100644
--- a/util-linux/switch_root.c
+++ b/util-linux/switch_root.c
@@ -5,6 +5,29 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
+//config:config SWITCH_ROOT
+//config:	bool "switch_root"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  The switch_root utility is used from initramfs to select a new
+//config:	  root device. Under initramfs, you have to use this instead of
+//config:	  pivot_root. (Stop reading here if you don't care why.)
+//config:
+//config:	  Booting with initramfs extracts a gzipped cpio archive into rootfs
+//config:	  (which is a variant of ramfs/tmpfs). Because rootfs can't be moved
+//config:	  or unmounted*, pivot_root will not work from initramfs. Instead,
+//config:	  switch_root deletes everything out of rootfs (including itself),
+//config:	  does a mount --move that overmounts rootfs with the new root, and
+//config:	  then execs the specified init program.
+//config:
+//config:	  * Because the Linux kernel uses rootfs internally as the starting
+//config:	  and ending point for searching through the kernel's doubly linked
+//config:	  list of active mount points. That's why.
+
+//applet:IF_SWITCH_ROOT(APPLET(switch_root, BB_DIR_SBIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_SWITCH_ROOT) += switch_root.o
 
 //usage:#define switch_root_trivial_usage
 //usage:       "[-c /dev/console] NEW_ROOT NEW_INIT [ARGS]"
diff --git a/util-linux/uevent.c b/util-linux/uevent.c
index b98fe61..c22216a 100644
--- a/util-linux/uevent.c
+++ b/util-linux/uevent.c
@@ -3,7 +3,6 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
-
 //config:config UEVENT
 //config:	bool "uevent"
 //config:	default y
diff --git a/util-linux/umount.c b/util-linux/umount.c
index 91da696..78eef57 100644
--- a/util-linux/umount.c
+++ b/util-linux/umount.c
@@ -7,6 +7,26 @@
  *
  * Licensed under GPLv2, see file LICENSE in this source tree.
  */
+//config:config UMOUNT
+//config:	bool "umount"
+//config:	default y
+//config:	select PLATFORM_LINUX
+//config:	help
+//config:	  When you want to remove a mounted filesystem from its current mount
+//config:	  point, for example when you are shutting down the system, the
+//config:	  'umount' utility is the tool to use. If you enabled the 'mount'
+//config:	  utility, you almost certainly also want to enable 'umount'.
+//config:
+//config:config FEATURE_UMOUNT_ALL
+//config:	bool "Support option -a"
+//config:	default y
+//config:	depends on UMOUNT
+//config:	help
+//config:	  Support -a option to unmount all currently mounted filesystems.
+
+//applet:IF_UMOUNT(APPLET(umount, BB_DIR_BIN, BB_SUID_DROP))
+
+//kbuild:lib-$(CONFIG_UMOUNT) += umount.o
 
 //usage:#define umount_trivial_usage
 //usage:       "[OPTIONS] FILESYSTEM|DIRECTORY"
diff --git a/util-linux/unshare.c b/util-linux/unshare.c
index dcc5955..bbabeef 100644
--- a/util-linux/unshare.c
+++ b/util-linux/unshare.c
@@ -6,7 +6,6 @@
  *
  * Licensed under GPLv2 or later, see file LICENSE in this source tree.
  */
-
 //config:config UNSHARE
 //config:	bool "unshare"
 //config:	default y