| /* vi: set sw=4 ts=4: */ |
| #ifndef __BB_USAGE_H__ |
| #define __BB_USAGE_H__ |
| |
| #define addgroup_trivial_usage \ |
| "[-g GID] group_name [user_name]" |
| #define addgroup_full_usage \ |
| "Adds a group to the system\n\n" \ |
| "Options:\n" \ |
| "\t-g GID\t\tspecify gid" |
| |
| #define adduser_trivial_usage \ |
| "[OPTIONS] user_name" |
| #define adduser_full_usage \ |
| "Adds a user to the system\n\n" \ |
| "Options:\n" \ |
| "\t-h DIR\t\tAssign home directory DIR\n" \ |
| "\t-g GECOS\tAssign gecos field GECOS\n" \ |
| "\t-s SHELL\tAssign login shell SHELL\n" \ |
| "\t-G\t\tAdd the user to existing group GROUP\n" \ |
| "\t-S\t\tcreate a system user (ignored)\n" \ |
| "\t-D\t\tDo not assign a password (logins still possible via ssh)\n" \ |
| "\t-H\t\tDo not create the home directory" |
| |
| #define adjtimex_trivial_usage \ |
| "[-q] [-o offset] [-f frequency] [-p timeconstant] [-t tick]" |
| #define adjtimex_full_usage \ |
| "Reads and optionally sets system timebase parameters.\n" \ |
| "See adjtimex(2).\n\n" \ |
| "Options:\n" \ |
| "\t-q\t\tquiet mode - do not print\n" \ |
| "\t-o offset\ttime offset, microseconds\n" \ |
| "\t-f frequency\tfrequency adjust, integer kernel units (65536 is 1ppm)\n" \ |
| "\t\t\t(positive values make the system clock run fast)\n" \ |
| "\t-t tick\t\tmicroseconds per tick, usually 10000\n" \ |
| "\t-p timeconstant" |
| |
| #define ar_trivial_usage \ |
| "[-o] [-v] [-p] [-t] [-x] ARCHIVE FILES" |
| #define ar_full_usage \ |
| "Extract or list FILES from an ar archive.\n\n" \ |
| "Options:\n" \ |
| "\t-o\t\tpreserve original dates\n" \ |
| "\t-p\t\textract to stdout\n" \ |
| "\t-t\t\tlist\n" \ |
| "\t-x\t\textract\n" \ |
| "\t-v\t\tverbosely list files processed" |
| |
| #define arping_trivial_usage \ |
| "[-fqbDUA] [-c count] [-w timeout] [-i device] [-s sender] target" |
| #define arping_full_usage \ |
| "Ping hosts by ARP requests/replies.\n\n" \ |
| "Options:\n" \ |
| "\t-f\t\tQuit on first ARP reply\n" \ |
| "\t-q\t\tBe quiet\n" \ |
| "\t-b\t\tKeep broadcasting, don't go unicast\n" \ |
| "\t-D\t\tDuplicated address detection mode\n" \ |
| "\t-U\t\tUnsolicited ARP mode, update your neighbours\n" \ |
| "\t-A\t\tARP answer mode, update your neighbours\n" \ |
| "\t-c count\tStop after sending count ARP request packets\n" \ |
| "\t-w timeout\tTime to wait for ARP reply, in seconds\n" \ |
| "\t-i device\tOutgoing interface name, default is eth0\n" \ |
| "\t-s sender\tSet specific sender IP address\n" \ |
| "\ttarget\t\tTarget IP address of ARP request" |
| |
| #define ash_trivial_usage \ |
| "[FILE]...\n" \ |
| "or: ash -c command [args]..." |
| #define ash_full_usage \ |
| "The ash shell (command interpreter)" |
| |
| #define awk_trivial_usage \ |
| "[OPTION]... [program-text] [FILE ...]" |
| #define awk_full_usage \ |
| "Options:\n" \ |
| "\t-v var=val\tassign value 'val' to variable 'var'\n" \ |
| "\t-F sep\t\tuse 'sep' as field separator\n" \ |
| "\t-f progname\tread program source from file 'progname'" |
| |
| #define basename_trivial_usage \ |
| "FILE [SUFFIX]" |
| #define basename_full_usage \ |
| "Strips directory path and suffixes from FILE.\n" \ |
| "If specified, also removes any trailing SUFFIX." |
| #define basename_example_usage \ |
| "$ basename /usr/local/bin/foo\n" \ |
| "foo\n" \ |
| "$ basename /usr/local/bin/\n" \ |
| "bin\n" \ |
| "$ basename /foo/bar.txt .txt\n" \ |
| "bar" |
| |
| #define bunzip2_trivial_usage \ |
| "[OPTION]... [FILE]" |
| #define bunzip2_full_usage \ |
| "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \ |
| "Options:\n" \ |
| "\t-c\tWrite output to standard output\n" \ |
| "\t-f\tForce" |
| |
| #define busybox_notes_usage \ |
| "Hello world!\n" |
| |
| #define bzcat_trivial_usage \ |
| "FILE" |
| #define bzcat_full_usage \ |
| "Uncompress to stdout." |
| |
| #define unlzma_trivial_usage \ |
| "[OPTION]... [FILE]" |
| #define unlzma_full_usage \ |
| "Uncompress FILE (or standard input if FILE is '-' or omitted).\n\n" \ |
| "Options:\n" \ |
| "\t-c\tWrite output to standard output\n" \ |
| "\t-f\tForce" |
| |
| #define lzmacat_trivial_usage \ |
| "FILE" |
| #define lzmacat_full_usage \ |
| "Uncompress to stdout." |
| |
| #define cal_trivial_usage \ |
| "[-jy] [[month] year]" |
| #define cal_full_usage \ |
| "Display a calendar.\n" \ |
| "\nOptions:\n" \ |
| "\t-j\tUse julian dates\n" \ |
| "\t-y\tDisplay the entire year" |
| |
| #define cat_trivial_usage \ |
| "[-u] [FILE]..." |
| #define cat_full_usage \ |
| "Concatenates FILE(s) and prints them to stdout.\n\n" \ |
| "Options:\n" \ |
| "\t-u\tignored since unbuffered i/o is always used" |
| #define cat_example_usage \ |
| "$ cat /proc/uptime\n" \ |
| "110716.72 17.67" |
| |
| #define catv_trivial_usage \ |
| "[-etv] [FILE]..." |
| #define catv_full_usage \ |
| "Display nonprinting characters as ^x or M-x.\n\n"\ |
| "\t-e\tEnd each line with $\n" \ |
| "\t-t\tShow tabs as ^I\n" \ |
| "\t-v\tDon't use ^x or M-x escapes." |
| #define chattr_trivial_usage \ |
| "[-R] [-+=AacDdijsStTu] [-v version] files..." |
| #define chattr_full_usage \ |
| "change file attributes on an ext2 fs\n\n" \ |
| "Modifiers:\n" \ |
| "\t-\tremove attributes\n" \ |
| "\t+\tadd attributes\n" \ |
| "\t=\tset attributes\n" \ |
| "Attributes:\n" \ |
| "\tA\tdon't track atime\n" \ |
| "\ta\tappend mode only\n" \ |
| "\tc\tenable compress\n" \ |
| "\tD\twrite dir contents synchronously\n" \ |
| "\td\tdo not backup with dump\n" \ |
| "\ti\tcannot be modified (immutable)\n" \ |
| "\tj\twrite all data to journal first\n" \ |
| "\ts\tzero disk storage when deleted\n" \ |
| "\tS\twrite file contents synchronously\n" \ |
| "\tt\tdisable tail-merging of partial blocks with other files\n" \ |
| "\tu\tallow file to be undeleted\n" \ |
| "Options:\n" \ |
| "\t-R\trecursively list subdirectories\n" \ |
| "\t-v\tset the file's version/generation number" |
| |
| #define chgrp_trivial_usage \ |
| "[OPTION]... GROUP FILE..." |
| #define chgrp_full_usage \ |
| "Change the group membership of each FILE to GROUP.\n" \ |
| "\nOptions:\n" \ |
| "\t-R\tChanges files and directories recursively" |
| #define chgrp_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chgrp root /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chmod_trivial_usage \ |
| "[-R] MODE[,MODE]... FILE..." |
| #define chmod_full_usage \ |
| "Each MODE is one or more of the letters ugoa, one of the\n" \ |
| "symbols +-= and one or more of the letters rwxst.\n\n" \ |
| "Options:\n" \ |
| "\t-R\tChanges files and directories recursively" |
| #define chmod_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rw-rw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chmod u+x /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rwxrw-r-- 1 root root 0 Apr 12 18:25 /tmp/foo*\n" \ |
| "$ chmod 444 /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chown_trivial_usage \ |
| "[ -Rh ]... OWNER[<.|:>[GROUP]] FILE..." |
| #define chown_full_usage \ |
| "Change the owner and/or group of each FILE to OWNER and/or GROUP.\n" \ |
| "\nOptions:\n" \ |
| "\t-R\tChanges files and directories recursively\n" \ |
| "\t-h\tDo not dereference symbolic links" |
| #define chown_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 andersen andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chown root /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root andersen 0 Apr 12 18:25 /tmp/foo\n" \ |
| "$ chown root.root /tmp/foo\n" \ |
| "ls -l /tmp/foo\n" \ |
| "-r--r--r-- 1 root root 0 Apr 12 18:25 /tmp/foo\n" |
| |
| #define chroot_trivial_usage \ |
| "NEWROOT [COMMAND...]" |
| #define chroot_full_usage \ |
| "Run COMMAND with root directory set to NEWROOT." |
| #define chroot_example_usage \ |
| "$ ls -l /bin/ls\n" \ |
| "lrwxrwxrwx 1 root root 12 Apr 13 00:46 /bin/ls -> /BusyBox\n" \ |
| "# mount /dev/hdc1 /mnt -t minix\n" \ |
| "# chroot /mnt\n" \ |
| "# ls -l /bin/ls\n" \ |
| "-rwxr-xr-x 1 root root 40816 Feb 5 07:45 /bin/ls*\n" |
| |
| #define chvt_trivial_usage \ |
| "N" |
| #define chvt_full_usage \ |
| "Changes the foreground virtual terminal to /dev/ttyN" |
| |
| #define cksum_trivial_usage \ |
| "FILES..." |
| #define cksum_full_usage \ |
| "Calculates the CRC32 checksums of FILES." |
| |
| #define clear_trivial_usage \ |
| "" |
| #define clear_full_usage \ |
| "Clear screen." |
| |
| #define cmp_trivial_usage \ |
| "[-l] [-s] FILE1 [FILE2]" |
| #define cmp_full_usage \ |
| "Compares FILE1 vs stdin if FILE2 is not specified.\n\n" \ |
| "Options:\n" \ |
| "\t-l\tWrite the byte numbers (decimal) and values (octal)\n" \ |
| "\t\t for all differing bytes\n" \ |
| "\t-s\tquiet mode - do not print" |
| |
| #define comm_trivial_usage \ |
| "[-123] FILE1 FILE2" |
| #define comm_full_usage \ |
| "Compares FILE1 to FILE2, or to stdin if = is specified.\n\n" \ |
| "Options:\n" \ |
| "\t-1\tSuppress lines unique to FILE1\n" \ |
| "\t-2\tSuppress lines unique to FILE2\n" \ |
| "\t-3\tSuppress lines common to both files" |
| |
| #define bbconfig_trivial_usage \ |
| "" |
| #define bbconfig_full_usage \ |
| "Print the config file which built busybox" |
| |
| #define cp_trivial_usage \ |
| "[OPTION]... SOURCE DEST" |
| #define cp_full_usage \ |
| "Copies SOURCE to DEST, or multiple SOURCE(s) to DIRECTORY.\n" \ |
| "\n" \ |
| "\t-a\tSame as -dpR\n" \ |
| "\t-d,-P\tPreserves links\n" \ |
| "\t-H,-L\tDereference all symlinks (implied by default)\n" \ |
| "\t-p\tPreserves file attributes if possible\n" \ |
| "\t-f\tforce (implied; ignored) - always set\n" \ |
| "\t-i\tinteractive, prompt before overwrite\n" \ |
| "\t-R,-r\tCopies directories recursively" |
| |
| #define cpio_trivial_usage \ |
| "-[dimtuv][F cpiofile]" |
| #define cpio_full_usage \ |
| "Extract or list files from a cpio archive\n" \ |
| "Main operation mode:\n" \ |
| "\td\t\tmake leading directories\n" \ |
| "\ti\t\textract\n" \ |
| "\tm\t\tpreserve mtime\n" \ |
| "\tt\t\tlist\n" \ |
| "\tv\t\tverbose\n" \ |
| "\tu\t\tunconditional overwrite\n" \ |
| "\tF\t\tinput from file" |
| |
| #define crond_trivial_usage \ |
| "-d[#] -c <crondir> -f -b" |
| #define crond_full_usage \ |
| "\t-d [#] -l [#] -S -L logfile -f -b -c dir\n" \ |
| "\t-d num\tdebug level\n" \ |
| "\t-l num\tlog level (8 - default)\n" \ |
| "\t-S\tlog to syslogd (default)\n" \ |
| "\t-L file\tlog to file\n" \ |
| "\t-f\trun in foreground\n" \ |
| "\t-b\trun in background (default)\n" \ |
| "\t-c dir\tworking dir" |
| |
| #define crontab_trivial_usage \ |
| "[-c dir] {file|-}|[-u|-l|-e|-d user]" |
| #define crontab_full_usage \ |
| "\tfile <opts> replace crontab from file\n" \ |
| "\t- <opts> replace crontab from stdin\n" \ |
| "\t-u user specify user\n" \ |
| "\t-l [user] list crontab for user\n" \ |
| "\t-e [user] edit crontab for user\n" \ |
| "\t-d [user] delete crontab for user\n" \ |
| "\t-c dir specify crontab directory" |
| |
| |
| #define cut_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define cut_full_usage \ |
| "Prints selected fields from each input FILE to standard output.\n\n" \ |
| "Options:\n" \ |
| "\t-b LIST\t\tOutput only bytes from LIST\n" \ |
| "\t-c LIST\t\tOutput only characters from LIST\n" \ |
| "\t-d CHAR\t\tUse CHAR instead of tab as the field delimiter\n" \ |
| "\t-s\t\tOutput only the lines containing delimiter\n" \ |
| "\t-f N\t\tPrint only these fields\n" \ |
| "\t-n\t\tIgnored" |
| #define cut_example_usage \ |
| "$ echo \"Hello world\" | cut -f 1 -d ' '\n" \ |
| "Hello\n" \ |
| "$ echo \"Hello world\" | cut -f 2 -d ' '\n" \ |
| "world\n" |
| |
| #define date_trivial_usage \ |
| "[OPTION]... [MMDDhhmm[[CC]YY][.ss]] [+FORMAT]" |
| #define date_full_usage \ |
| "Displays the current time in the given FORMAT, or sets the system date.\n" \ |
| "\nOptions:\n" \ |
| "\t-R\t\tOutputs RFC-822 compliant date string\n" \ |
| "\t-d STRING\tDisplays time described by STRING, not `now'\n" \ |
| USE_FEATURE_DATE_ISOFMT( \ |
| "\t-I[TIMESPEC]\tOutputs an ISO-8601 compliant date/time string\n" \ |
| "\t\t\tTIMESPEC=`date' (or missing) for date only,\n" \ |
| "\t\t\t`hours', `minutes', or `seconds' for date and,\n" \ |
| "\t\t\ttime to the indicated precision\n" \ |
| "\t-D hint\t\tUse 'hint' as date format, via strptime()\n" \ |
| ) \ |
| "\t-s\t\tSets time described by STRING\n" \ |
| "\t-r FILE\t\tDisplays the last modification time of FILE\n" \ |
| "\t-u\t\tPrints or sets Coordinated Universal Time" |
| #define date_example_usage \ |
| "$ date\n" \ |
| "Wed Apr 12 18:52:41 MDT 2000\n" |
| |
| #define dc_trivial_usage \ |
| "expression ..." |
| #define dc_full_usage \ |
| "This is a Tiny RPN calculator that understands the\n" \ |
| "following operations: +, add, -, sub, *, mul, /, div, %, mod, " \ |
| "**, exp, and, or, not, eor.\n" \ |
| "For example: 'dc 2 2 add' -> 4, and 'dc 8 8 \\* 2 2 + /' -> 16.\n" \ |
| "\nOptions:\n" \ |
| "p - Prints the value on the top of the stack, without altering the stack\n" \ |
| "f - Prints the entire contents of the stack without altering anything\n" \ |
| "o - Pops the value off the top of the stack and uses it to set the output radix\n" \ |
| " Only 10 and 16 are supported" |
| #define dc_example_usage \ |
| "$ dc 2 2 + p\n" \ |
| "4\n" \ |
| "$ dc 8 8 \\* 2 2 + / p\n" \ |
| "16\n" \ |
| "$ dc 0 1 and p\n" \ |
| "0\n" \ |
| "$ dc 0 1 or p\n" \ |
| "1\n" \ |
| "$ echo 72 9 div 8 mul p | dc\n" \ |
| "64\n" |
| |
| #define dd_trivial_usage \ |
| "[if=FILE] [of=FILE] " USE_FEATURE_DD_IBS_OBS("[ibs=N] [obs=N] ") "[bs=N] [count=N] [skip=N]\n" \ |
| "\t [seek=N]" USE_FEATURE_DD_IBS_OBS(" [conv=notrunc|noerror|sync]") |
| #define dd_full_usage \ |
| "Copy a file, converting and formatting according to options\n\n" \ |
| "\tif=FILE\t\tread from FILE instead of stdin\n" \ |
| "\tof=FILE\t\twrite to FILE instead of stdout\n" \ |
| "\tbs=N\t\tread and write N bytes at a time\n" \ |
| USE_FEATURE_DD_IBS_OBS("\tibs=N\t\tread N bytes at a time\n") \ |
| USE_FEATURE_DD_IBS_OBS("\tobs=N\t\twrite N bytes at a time\n") \ |
| "\tcount=N\t\tcopy only N input blocks\n" \ |
| "\tskip=N\t\tskip N input blocks\n" \ |
| "\tseek=N\t\tskip N output blocks\n" \ |
| USE_FEATURE_DD_IBS_OBS( \ |
| "\tconv=notrunc\tdon't truncate output file\n" \ |
| "\tconv=noerror\tcontinue after read errors\n" \ |
| "\tconv=sync\tpad blocks with zeros\n" \ |
| ) \ |
| "\n" \ |
| "Numbers may be suffixed by c (x1), w (x2), b (x512), kD (x1000), k (x1024),\n" \ |
| "MD (x1000000), M (x1048576), GD (x1000000000) or G (x1073741824)" |
| #define dd_example_usage \ |
| "$ dd if=/dev/zero of=/dev/ram1 bs=1M count=4\n" \ |
| "4+0 records in\n" \ |
| "4+0 records out\n" |
| |
| #define deallocvt_trivial_usage \ |
| "[N]" |
| #define deallocvt_full_usage \ |
| "Deallocate unused virtual terminal /dev/ttyN" |
| |
| #define delgroup_trivial_usage \ |
| "GROUP" |
| #define delgroup_full_usage \ |
| "Deletes group GROUP from the system" |
| |
| #define deluser_trivial_usage \ |
| "USER" |
| #define deluser_full_usage \ |
| "Deletes user USER from the system" |
| |
| #define devfsd_trivial_usage \ |
| "mntpnt [-v]" \ |
| USE_DEVFSD_FG_NP("[-fg][-np]" ) |
| #define devfsd_full_usage \ |
| "Optional daemon for managing devfs permissions and old device name symlinks.\n" \ |
| "\nOptions:\n" \ |
| "\tmntpnt\tThe mount point where devfs is mounted.\n\n" \ |
| "\t-v\tPrint the protocol version numbers for devfsd\n" \ |
| "\t\tand the kernel-side protocol version and exits." \ |
| USE_DEVFSD_FG_NP( "\n\n\t-fg\tRun the daemon in the foreground.\n\n" \ |
| "\t-np\tExit after parsing the configuration file\n" \ |
| "\t\tand processing synthetic REGISTER events.\n" \ |
| "\t\tDo not poll for events.") |
| |
| #define df_trivial_usage \ |
| "[-" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILESYSTEM ...]" |
| #define df_full_usage \ |
| "Print the filesystem space used and space available.\n\n" \ |
| "Options:\n" \ |
| USE_FEATURE_HUMAN_READABLE( \ |
| "\n\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \ |
| "\t-m\tprint sizes in megabytes\n" \ |
| "\t-k\tprint sizes in kilobytes(default)" \ |
| ) \ |
| SKIP_FEATURE_HUMAN_READABLE("\n\t-k\tignored") |
| #define df_example_usage \ |
| "$ df\n" \ |
| "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ |
| "/dev/sda3 8690864 8553540 137324 98% /\n" \ |
| "/dev/sda1 64216 36364 27852 57% /boot\n" \ |
| "$ df /dev/sda3\n" \ |
| "Filesystem 1k-blocks Used Available Use% Mounted on\n" \ |
| "/dev/sda3 8690864 8553540 137324 98% /\n" |
| |
| #define diff_trivial_usage \ |
| "[-abdiNqrTstw] [-L LABEL] [-S FILE] [-U LINES] FILE1 FILE2" |
| #define diff_full_usage \ |
| "Compare files line by line and output the differences between them.\n" \ |
| "This diff implementation only supports unified diffs.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tTreat all files as text\n" \ |
| "\t-b\tIgnore changes in the amount of whitespace\n" \ |
| "\t-d\tTry hard to find a smaller set of changes\n" \ |
| "\t-i\tIgnore case differences\n" \ |
| "\t-L\tUse LABEL instead of the filename in the unified header\n" \ |
| "\t-N\tTreat absent files as empty\n" \ |
| "\t-q\tOutput only whether files differ\n" \ |
| "\t-r\tRecursively compare any subdirectories\n" \ |
| "\t-S\tStart with FILE when comparing directories\n" \ |
| "\t-T\tMake tabs line up by prefixing a tab when necessary\n" \ |
| "\t-s\tReport when two files are the same\n" \ |
| "\t-t\tExpand tabs to spaces in output\n" \ |
| "\t-U\tOutput LINES lines of context\n" \ |
| "\t-w\tIgnore all whitespace\n" |
| |
| #define dirname_trivial_usage \ |
| "FILENAME" |
| #define dirname_full_usage \ |
| "Strips non-directory suffix from FILENAME" |
| #define dirname_example_usage \ |
| "$ dirname /tmp/foo\n" \ |
| "/tmp\n" \ |
| "$ dirname /tmp/foo/\n" \ |
| "/tmp\n" |
| |
| #define dmesg_trivial_usage \ |
| "[-c] [-n LEVEL] [-s SIZE]" |
| #define dmesg_full_usage \ |
| "Prints or controls the kernel ring buffer\n\n" \ |
| "Options:\n" \ |
| "\t-c\t\tClears the ring buffer's contents after printing\n" \ |
| "\t-n LEVEL\tSets console logging level\n" \ |
| "\t-s SIZE\t\tUse a buffer of size SIZE" |
| |
| #define dnsd_trivial_usage \ |
| "[-c config] [-t seconds] [-p port] [-i iface-ip] [-d]" |
| #define dnsd_full_usage \ |
| "Small and static DNS server daemon\n\n" \ |
| "Options:\n" \ |
| "\t-c\t\tconfig filename\n" \ |
| "\t-t\t\tTTL in seconds\n" \ |
| "\t-p\t\tlistening port\n" \ |
| "\t-i\t\tlistening iface ip (default all)\n" \ |
| "\t-d\t\tdaemonize" |
| |
| #define dos2unix_trivial_usage \ |
| "[option] [FILE]" |
| #define dos2unix_full_usage \ |
| "Converts FILE from dos format to unix format. When no option\n" \ |
| "is given, the input is converted to the opposite output format.\n" \ |
| "When no file is given, uses stdin for input and stdout for output.\n\n" \ |
| "Options:\n" \ |
| "\t-u\toutput will be in UNIX format\n" \ |
| "\t-d\toutput will be in DOS format" |
| |
| #define dpkg_trivial_usage \ |
| "[-ilCPru] [-F option] package_name" |
| #define dpkg_full_usage \ |
| "dpkg is a utility to install, remove and manage Debian packages.\n\n" \ |
| "Options:\n" \ |
| "\t-i\t\tInstall the package\n" \ |
| "\t-l\t\tList of installed packages\n" \ |
| "\t-C\t\tConfigure an unpackaged package\n" \ |
| "\t-F depends\tIgnore dependency problems\n" \ |
| "\t-P\t\tPurge all files of a package\n" \ |
| "\t-r\t\tRemove all but the configuration files for a package\n" \ |
| "\t-u\t\tUnpack a package, but don't configure it" |
| |
| #define dpkg_deb_trivial_usage \ |
| "[-cefxX] FILE [argument]" |
| #define dpkg_deb_full_usage \ |
| "Perform actions on Debian packages (.debs)\n\n" \ |
| "Options:\n" \ |
| "\t-c\tList contents of filesystem tree\n" \ |
| "\t-e\tExtract control files to [argument] directory\n" \ |
| "\t-f\tDisplay control field name starting with [argument]\n" \ |
| "\t-x\tExtract packages filesystem tree to directory\n" \ |
| "\t-X\tVerbose extract" |
| #define dpkg_deb_example_usage \ |
| "$ dpkg-deb -X ./busybox_0.48-1_i386.deb /tmp\n" |
| |
| #define du_trivial_usage \ |
| "[-aHLdclsx" USE_FEATURE_HUMAN_READABLE("hm") "k] [FILE]..." |
| #define du_full_usage \ |
| "Summarizes disk space used for each FILE and/or directory.\n" \ |
| "Disk space is printed in units of " \ |
| USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("1024") \ |
| SKIP_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("512") \ |
| " bytes.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tshow sizes of files in addition to directories\n" \ |
| "\t-H\tfollow symbolic links that are FILE command line args\n" \ |
| "\t-L\tfollow all symbolic links encountered\n" \ |
| "\t-d N\tlimit output to directories (and files with -a) of depth < N\n" \ |
| "\t-c\toutput a grand total\n" \ |
| "\t-l\tcount sizes many times if hard linked\n" \ |
| "\t-s\tdisplay only a total for each argument\n" \ |
| "\t-x\tskip directories on different filesystems\n" \ |
| USE_FEATURE_HUMAN_READABLE( \ |
| "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n" \ |
| "\t-m\tprint sizes in megabytes\n" \ |
| ) \ |
| "\t-k\tprint sizes in kilobytes" \ |
| USE_FEATURE_DU_DEFAULT_BLOCKSIZE_1K("(default)") |
| #define du_example_usage \ |
| "$ du\n" \ |
| "16 ./CVS\n" \ |
| "12 ./kernel-patches/CVS\n" \ |
| "80 ./kernel-patches\n" \ |
| "12 ./tests/CVS\n" \ |
| "36 ./tests\n" \ |
| "12 ./scripts/CVS\n" \ |
| "16 ./scripts\n" \ |
| "12 ./docs/CVS\n" \ |
| "104 ./docs\n" \ |
| "2417 .\n" |
| |
| #define dumpkmap_trivial_usage \ |
| "> keymap" |
| #define dumpkmap_full_usage \ |
| "Prints out a binary keyboard translation table to standard output." |
| #define dumpkmap_example_usage \ |
| "$ dumpkmap > keymap\n" |
| |
| #define dumpleases_trivial_usage \ |
| "[-r|-a] [-f LEASEFILE]" |
| #define dumpleases_full_usage \ |
| "Displays the DHCP leases granted by udhcpd.\n\n" \ |
| "Options:\n" \ |
| "\t-f,\t--file=FILENAME\tLeases file to load\n" \ |
| "\t-r,\t--remaining\tInterpret lease times as time remaining\n" \ |
| "\t-a,\t--absolute\tInterpret lease times as expire time" |
| |
| #define e2fsck_trivial_usage \ |
| "[-panyrcdfvstDFSV] [-b superblock] [-B blocksize] " \ |
| "[-I inode_buffer_blocks] [-P process_inode_size] " \ |
| "[-l|-L bad_blocks_file] [-C fd] [-j external_journal] " \ |
| "[-E extended-options] device" |
| #define e2fsck_full_usage \ |
| "Check a Linux ext2/ext3 file system.\n\n" \ |
| "Options:\n" \ |
| "\t-p\tAutomatic repair (no questions)\n" \ |
| "\t-n\tMake no changes to the filesystem\n" \ |
| "\t-y\tAssume 'yes' to all questions\n" \ |
| "\t-c\tCheck for bad blocks and add them to the badblock list\n" \ |
| "\t-f\tForce checking even if filesystem is marked clean\n" \ |
| "\t-v\tBe verbose\n" \ |
| "\t-b superblock\tUse alternative superblock\n" \ |
| "\t-B blocksize\tForce blocksize when looking for superblock\n" \ |
| "\t-j journal\tSet location of the external journal\n" \ |
| "\t-l file\tAdd to badblocks list\n" \ |
| "\t-L file\tSet badblocks list" |
| |
| #define echo_trivial_usage \ |
| USE_FEATURE_FANCY_ECHO("[-neE] ") "[ARG ...]" |
| #define echo_full_usage \ |
| "Prints the specified ARGs to stdout\n\n" \ |
| USE_FEATURE_FANCY_ECHO( \ |
| "Options:\n" \ |
| "\t-n\tsuppress trailing newline\n" \ |
| "\t-e\tinterpret backslash-escaped characters (i.e., \\t=tab)\n" \ |
| "\t-E\tdisable interpretation of backslash-escaped characters" \ |
| ) |
| #define echo_example_usage \ |
| "$ echo \"Erik is cool\"\n" \ |
| "Erik is cool\n" \ |
| USE_FEATURE_FANCY_ECHO("$ echo -e \"Erik\\nis\\ncool\"\n" \ |
| "Erik\n" \ |
| "is\n" \ |
| "cool\n" \ |
| "$ echo \"Erik\\nis\\ncool\"\n" \ |
| "Erik\\nis\\ncool\n") |
| |
| #define eject_trivial_usage \ |
| "[-t] [DEVICE]" |
| #define eject_full_usage \ |
| "Eject specified DEVICE (or default /dev/cdrom).\n\n" \ |
| "Options:\n" \ |
| "\t-t\tclose tray" |
| |
| #define ed_trivial_usage "" |
| #define ed_full_usage "" |
| |
| #define env_trivial_usage \ |
| "[-iu] [-] [name=value]... [command]" |
| #define env_full_usage \ |
| "Prints the current environment or runs a program after setting\n" \ |
| "up the specified environment.\n\n" \ |
| "Options:\n" \ |
| "\t-, -i\tstart with an empty environment\n" \ |
| "\t-u\tremove variable from the environment" |
| |
| #define ether_wake_trivial_usage \ |
| "[-b] [-i iface] [-p aa:bb:cc:dd[:ee:ff]] MAC" |
| #define ether_wake_full_usage \ |
| "Send a magic packet to wake up sleeping machines.\n" \ |
| "MAC must be a station address (00:11:22:33:44:55) or\n" \ |
| " a hostname with a known 'ethers' entry.\n\n" \ |
| "Options:\n" \ |
| "\t-b\t\tSend wake-up packet to the broadcast address\n" \ |
| "\t-i iface\tUse interface ifname instead of the default \"eth0\"\n" \ |
| "\t-p pass\tAppend the four or six byte password PW to the packet" |
| |
| #define expr_trivial_usage \ |
| "EXPRESSION" |
| #define expr_full_usage \ |
| "Prints the value of EXPRESSION to standard output.\n\n" \ |
| "EXPRESSION may be:\n" \ |
| "\tARG1 | ARG2 ARG1 if it is neither null nor 0, otherwise ARG2\n" \ |
| "\tARG1 & ARG2 ARG1 if neither argument is null or 0, otherwise 0\n" \ |
| "\tARG1 < ARG2 ARG1 is less than ARG2\n" \ |
| "\tARG1 <= ARG2 ARG1 is less than or equal to ARG2\n" \ |
| "\tARG1 = ARG2 ARG1 is equal to ARG2\n" \ |
| "\tARG1 != ARG2 ARG1 is unequal to ARG2\n" \ |
| "\tARG1 >= ARG2 ARG1 is greater than or equal to ARG2\n" \ |
| "\tARG1 > ARG2 ARG1 is greater than ARG2\n" \ |
| "\tARG1 + ARG2 arithmetic sum of ARG1 and ARG2\n" \ |
| "\tARG1 - ARG2 arithmetic difference of ARG1 and ARG2\n" \ |
| "\tARG1 * ARG2 arithmetic product of ARG1 and ARG2\n" \ |
| "\tARG1 / ARG2 arithmetic quotient of ARG1 divided by ARG2\n" \ |
| "\tARG1 % ARG2 arithmetic remainder of ARG1 divided by ARG2\n" \ |
| "\tSTRING : REGEXP anchored pattern match of REGEXP in STRING\n" \ |
| "\tmatch STRING REGEXP same as STRING : REGEXP\n" \ |
| "\tsubstr STRING POS LENGTH substring of STRING, POS counted from 1\n" \ |
| "\tindex STRING CHARS index in STRING where any CHARS is found,\n" \ |
| "\t or 0\n" \ |
| "\tlength STRING length of STRING\n" \ |
| "\tquote TOKEN interpret TOKEN as a string, even if\n" \ |
| "\t it is a keyword like `match' or an\n" \ |
| "\t operator like `/'\n" \ |
| "\t( EXPRESSION ) value of EXPRESSION\n\n" \ |
| "Beware that many operators need to be escaped or quoted for shells.\n" \ |
| "Comparisons are arithmetic if both ARGs are numbers, else\n" \ |
| "lexicographical. Pattern matches return the string matched between \n" \ |
| "\\( and \\) or null; if \\( and \\) are not used, they return the number \n" \ |
| "of characters matched or 0." |
| |
| #define fakeidentd_trivial_usage \ |
| "[-b ip] [STRING]" |
| #define fakeidentd_full_usage \ |
| "Returns a set string to auth requests\n\n" \ |
| "\t-b\tBind to ip address\n" \ |
| "\tSTRING\tThe ident answer string (default is nobody)" |
| |
| #define false_trivial_usage \ |
| "" |
| #define false_full_usage \ |
| "Return an exit code of FALSE (1)." |
| #define false_example_usage \ |
| "$ false\n" \ |
| "$ echo $?\n" \ |
| "1\n" |
| |
| #define fbset_trivial_usage \ |
| "[options] [mode]" |
| #define fbset_full_usage \ |
| "Show and modify frame buffer settings" |
| #define fbset_example_usage \ |
| "$ fbset\n" \ |
| "mode \"1024x768-76\"\n" \ |
| "\t# D: 78.653 MHz, H: 59.949 kHz, V: 75.694 Hz\n" \ |
| "\tgeometry 1024 768 1024 768 16\n" \ |
| "\ttimings 12714 128 32 16 4 128 4\n" \ |
| "\taccel false\n" \ |
| "\trgba 5/11,6/5,5/0,0/0\n" \ |
| "endmode\n" |
| |
| #define fdflush_trivial_usage \ |
| "DEVICE" |
| #define fdflush_full_usage \ |
| "Forces floppy disk drive to detect disk change" |
| |
| #define fdformat_trivial_usage \ |
| "[-n] DEVICE" |
| #define fdformat_full_usage \ |
| "Low-level formats a floppy disk\n\n" \ |
| "Options:\n" \ |
| "\t-n\tDon't verify after format" |
| |
| #define fdisk_trivial_usage \ |
| "[-luv] [-C CYLINDERS] [-H HEADS] [-S SECTORS] [-b SSZ] DISK" |
| #define fdisk_full_usage \ |
| "Change partition table\n" \ |
| "Options:\n" \ |
| "\t-l List partition table(s)\n" \ |
| "\t-u Give Start and End in sector (instead of cylinder) units\n" \ |
| "\t-s PARTITION Give partition size(s) in blocks\n" \ |
| "\t-b 2048: (for certain MO disks) use 2048-byte sectors\n" \ |
| "\t-C CYLINDERS Set the number of cylinders\n" \ |
| "\t-H HEADS Set the number of heads\n" \ |
| "\t-S SECTORS Set the number of sectors\n" \ |
| "\t-v Give fdisk version" |
| |
| #define find_trivial_usage \ |
| "[PATH...] [EXPRESSION]" |
| #define find_full_usage \ |
| "Search for files in a directory hierarchy. The default PATH is\n" \ |
| "the current directory; default EXPRESSION is '-print'\n" \ |
| "\nEXPRESSION may consist of:\n" \ |
| "\t-follow\t\tDereference symbolic links\n" \ |
| "\t-name PATTERN\tFile name (leading directories removed) matches PATTERN\n" \ |
| "\t-print\t\tPrint (default and assumed)\n" \ |
| USE_FEATURE_FIND_PRINT0( \ |
| "\t-print0\t\tDelimit output with null characters rather than\n\t\t\tnewlines" \ |
| ) USE_FEATURE_FIND_TYPE( \ |
| "\n\t-type X\t\tFiletype matches X (where X is one of: f,d,l,b,c,...)" \ |
| ) USE_FEATURE_FIND_PERM( \ |
| "\n\t-perm PERMS\tPermissions match any of (+NNN); all of (-NNN);\n\t\t\tor exactly (NNN)" \ |
| ) USE_FEATURE_FIND_MTIME( \ |
| "\n\t-mtime DAYS\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) days" \ |
| ) USE_FEATURE_FIND_MMIN( \ |
| "\n\t-mmin MINS\tModified time is greater than (+N); less than (-N);\n\t\t\tor exactly (N) minutes" \ |
| ) USE_FEATURE_FIND_NEWER( \ |
| "\n\t-newer FILE\tModified time is more recent than FILE's" \ |
| ) USE_FEATURE_FIND_INUM( \ |
| "\n\t-inum N\t\tFile has inode number N" \ |
| ) USE_FEATURE_FIND_EXEC( \ |
| "\n\t-exec CMD\tExecute CMD with all instances of {} replaced by the" \ |
| "\n\t\t\tfiles matching EXPRESSION") |
| |
| #define find_example_usage \ |
| "$ find / -name passwd\n" \ |
| "/etc/passwd\n" |
| |
| #define fold_trivial_usage \ |
| "[-bs] [-w WIDTH] [FILE]" |
| #define fold_full_usage \ |
| "Wrap input lines in each FILE (standard input by default), writing to\n" \ |
| "standard output.\n\n" \ |
| "Options:\n" \ |
| "\t-b\tcount bytes rather than columns\n" \ |
| "\t-s\tbreak at spaces\n" \ |
| "\t-w\tuse WIDTH columns instead of 80" |
| |
| #define free_trivial_usage \ |
| "" |
| #define free_full_usage \ |
| "Displays the amount of free and used system memory" |
| #define free_example_usage \ |
| "$ free\n" \ |
| " total used free shared buffers\n" \ |
| " Mem: 257628 248724 8904 59644 93124\n" \ |
| " Swap: 128516 8404 120112\n" \ |
| "Total: 386144 257128 129016\n" \ |
| |
| #define freeramdisk_trivial_usage \ |
| "DEVICE" |
| #define freeramdisk_full_usage \ |
| "Frees all memory used by the specified ramdisk." |
| #define freeramdisk_example_usage \ |
| "$ freeramdisk /dev/ram2\n" |
| |
| #define fsck_trivial_usage \ |
| "[-ANPRTV] [ -C [ fd ] ] [-t fstype] [fs-options] [filesys ...]" |
| #define fsck_full_usage \ |
| "Check and repair filesystems.\n\n" \ |
| "Options:\n" \ |
| "\t-A\tWalk /etc/fstab and check all filesystems\n" \ |
| "\t-N\tDon't execute, just show what would be done\n" \ |
| "\t-P\tWhen using -A, check filesystems in parallel\n" \ |
| "\t-R\tWhen using -A, skip the root filesystem\n" \ |
| "\t-T\tDon't show title on startup\n" \ |
| "\t-V\tVerbose mode\n" \ |
| "\t-C\tWrite status information to specified filedescriptor\n" \ |
| "\t-t\tList of filesystem types to check" |
| |
| #define fsck_minix_trivial_usage \ |
| "[-larvsmf] /dev/name" |
| #define fsck_minix_full_usage \ |
| "Performs a consistency check for MINIX filesystems.\n\n" \ |
| "Options:\n" \ |
| "\t-l\tLists all filenames\n" \ |
| "\t-r\tPerform interactive repairs\n" \ |
| "\t-a\tPerform automatic repairs\n" \ |
| "\t-v\tverbose\n" \ |
| "\t-s\tOutputs super-block information\n" \ |
| "\t-m\tActivates MINIX-like \"mode not cleared\" warnings\n" \ |
| "\t-f\tForce file system check" |
| |
| #define ftpget_trivial_usage \ |
| "[options] remote-host local-file remote-file" |
| #define ftpget_full_usage \ |
| "Retrieve a remote file via FTP.\n\n" \ |
| "Options:\n" \ |
| "\t-c, --continue Continue a previous transfer\n" \ |
| "\t-v, --verbose Verbose\n" \ |
| "\t-u, --username Username to be used\n" \ |
| "\t-p, --password Password to be used\n" \ |
| "\t-P, --port Port number to be used" |
| |
| #define ftpput_trivial_usage \ |
| "[options] remote-host remote-file local-file" |
| #define ftpput_full_usage \ |
| "Store a local file on a remote machine via FTP.\n\n" \ |
| "Options:\n" \ |
| "\t-v, --verbose Verbose\n" \ |
| "\t-u, --username Username to be used\n" \ |
| "\t-p, --password Password to be used\n" \ |
| "\t-P, --port Port number to be used" |
| |
| #define fuser_trivial_usage \ |
| "[options] file OR port/proto" |
| #define fuser_full_usage \ |
| "Options:\n" \ |
| "\t-m Show all processes on the same mounted fs\n" \ |
| "\t-k Kill all processes that match.\n" \ |
| "\t-s Don't print or kill anything.\n" \ |
| "\t-4 When using port/proto only search IPv4 space\n" \ |
| "\t-6 When using port/proto only search IPv6 space\n" \ |
| "\t-SIGNAL When used with -k, this signal will be used to kill" |
| |
| #define getopt_trivial_usage \ |
| "[OPTIONS]..." |
| #define getopt_full_usage \ |
| "Parse command options\n" \ |
| "\t-a, --alternative Allow long options starting with single -\n" \ |
| "\t-l, --longoptions=longopts Long options to be recognized\n" \ |
| "\t-n, --name=progname The name under which errors are reported\n" \ |
| "\t-o, --options=optstring Short options to be recognized\n" \ |
| "\t-q, --quiet Disable error reporting by getopt(3)\n" \ |
| "\t-Q, --quiet-output No normal output\n" \ |
| "\t-s, --shell=shell Set shell quoting conventions\n" \ |
| "\t-T, --test Test for getopt(1) version\n" \ |
| "\t-u, --unquoted Do not quote the output" |
| #define getopt_example_usage \ |
| "$ cat getopt.test\n" \ |
| "#!/bin/sh\n" \ |
| "GETOPT=`getopt -o ab:c:: --long a-long,b-long:,c-long:: \\\n" \ |
| " -n 'example.busybox' -- \"$@\"`\n" \ |
| "if [ $? != 0 ] ; then exit 1 ; fi\n" \ |
| "eval set -- \"$GETOPT\"\n" \ |
| "while true ; do\n" \ |
| " case $1 in\n" \ |
| " -a|--a-long) echo \"Option a\" ; shift ;;\n" \ |
| " -b|--b-long) echo \"Option b, argument `$2'\" ; shift 2 ;;\n" \ |
| " -c|--c-long)\n" \ |
| " case \"$2\" in\n" \ |
| " \"\") echo \"Option c, no argument\"; shift 2 ;;\n" \ |
| " *) echo \"Option c, argument `$2'\" ; shift 2 ;;\n" \ |
| " esac ;;\n" \ |
| " --) shift ; break ;;\n" \ |
| " *) echo \"Internal error!\" ; exit 1 ;;\n" \ |
| " esac\n" \ |
| "done\n" |
| |
| #define getty_trivial_usage \ |
| "[OPTIONS]... baud_rate,... line [termtype]" |
| #define getty_full_usage \ |
| "Opens a tty, prompts for a login name, then invokes /bin/login\n\n" \ |
| "Options:\n" \ |
| "\t-h\t\tEnable hardware (RTS/CTS) flow control\n" \ |
| "\t-i\t\tDo not display /etc/issue before running login\n" \ |
| "\t-L\t\tLocal line, so do not do carrier detect\n" \ |
| "\t-m\t\tGet baud rate from modem's CONNECT status message\n" \ |
| "\t-w\t\tWait for a CR or LF before sending /etc/issue\n" \ |
| "\t-n\t\tDo not prompt the user for a login name\n" \ |
| "\t-f issue_file\tDisplay issue_file instead of /etc/issue\n" \ |
| "\t-l login_app\tInvoke login_app instead of /bin/login\n" \ |
| "\t-t timeout\tTerminate after timeout if no username is read\n" \ |
| "\t-I initstring\tSets the init string to send before anything else\n" \ |
| "\t-H login_host\tLog login_host into the utmp file as the hostname" |
| |
| #define grep_trivial_usage \ |
| "[-ihHnqvs" \ |
| USE_FEATURE_GREP_EGREP_ALIAS("E") \ |
| USE_FEATURE_GREP_CONTEXT("ABC") \ |
| "] PATTERN [FILEs...]" |
| #define grep_full_usage \ |
| "Search for PATTERN in each FILE or standard input.\n\n" \ |
| "Options:\n" \ |
| "\t-H\tprefix output lines with filename where match was found\n" \ |
| "\t-h\tsuppress the prefixing filename on output\n" \ |
| "\t-i\tignore case distinctions\n" \ |
| "\t-l\tlist names of files that match\n" \ |
| "\t-L\tlist names of files that do not match\n" \ |
| "\t-n\tprint line number with output lines\n" \ |
| "\t-q\tbe quiet. Returns 0 if PATTERN was found, 1 otherwise\n" \ |
| "\t-v\tselect non-matching lines\n" \ |
| "\t-s\tsuppress file open/read error messages\n" \ |
| "\t-c\tonly print count of matching lines\n" \ |
| "\t-f\tread PATTERN from file\n" \ |
| "\t-e\tPATTERN is a regular expression\n" \ |
| "\t-F\tPATTERN is a set of newline-separated strings" \ |
| USE_FEATURE_GREP_EGREP_ALIAS("\n\t-E\tPATTERN is an extended regular expression") \ |
| USE_FEATURE_GREP_CONTEXT("\n\t-A\tprint NUM lines of trailing context") \ |
| USE_FEATURE_GREP_CONTEXT("\n\t-B\tprint NUM lines of leading context") \ |
| USE_FEATURE_GREP_CONTEXT("\n\t-C\tprint NUM lines of output context") |
| |
| #define grep_example_usage \ |
| "$ grep root /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" \ |
| "$ grep ^[rR]oo. /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" |
| |
| #define gunzip_trivial_usage \ |
| "[OPTION]... FILE" |
| #define gunzip_full_usage \ |
| "Uncompress FILE (or standard input if FILE is '-').\n\n" \ |
| "Options:\n" \ |
| "\t-c\tWrite output to standard output\n" \ |
| "\t-f\tForce read when source is a terminal\n" \ |
| "\t-t\tTest compressed file integrity" |
| #define gunzip_example_usage \ |
| "$ ls -la /tmp/BusyBox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 557009 Apr 11 10:55 /tmp/BusyBox-0.43.tar.gz\n" \ |
| "$ gunzip /tmp/BusyBox-0.43.tar.gz\n" \ |
| "$ ls -la /tmp/BusyBox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/BusyBox-0.43.tar\n" |
| |
| #define gzip_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define gzip_full_usage \ |
| "Compress FILE(s) with maximum compression.\n" \ |
| "When FILE is '-' or unspecified, reads standard input. Implies -c.\n\n" \ |
| "Options:\n" \ |
| "\t-c\tWrite output to standard output instead of FILE.gz\n" \ |
| "\t-d\tDecompress\n" \ |
| "\t-f\tForce write when destination is a terminal" |
| #define gzip_example_usage \ |
| "$ ls -la /tmp/busybox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 1761280 Apr 14 17:47 /tmp/busybox.tar\n" \ |
| "$ gzip /tmp/busybox.tar\n" \ |
| "$ ls -la /tmp/busybox*\n" \ |
| "-rw-rw-r-- 1 andersen andersen 554058 Apr 14 17:49 /tmp/busybox.tar.gz\n" |
| |
| #define halt_trivial_usage \ |
| "[-d<delay>] [-n<nosync>] [-f<force>]" |
| #define halt_full_usage \ |
| "Halt the system.\n" \ |
| "Options:\n" \ |
| "\t-d\t\tdelay interval for halting\n" \ |
| "\t-n\t\tno call to sync()\n" \ |
| "\t-f\t\tforce halt (don't go through init)" |
| |
| #define hdparm_trivial_usage \ |
| "[options] [device] .." |
| #define hdparm_full_usage \ |
| USE_FEATURE_HDPARM_GET_IDENTITY("\tIf no device name is specified try to read from stdin.\n") \ |
| "\nOptions:\n" \ |
| "\t-a get/set fs readahead\n" \ |
| "\t-A set drive read-lookahead flag (0/1)\n" \ |
| "\t-b get/set bus state (0 == off, 1 == on, 2 == tristate)\n" \ |
| "\t-B set Advanced Power Management setting (1-255)\n" \ |
| "\t-c get/set IDE 32-bit IO setting\n" \ |
| "\t-C check IDE power mode status\n" \ |
| USE_FEATURE_HDPARM_HDIO_GETSET_DMA("\t-d get/set using_dma flag\n") \ |
| "\t-D enable/disable drive defect-mgmt\n" \ |
| "\t-f flush buffer cache for device on exit\n" \ |
| "\t-g display drive geometry\n" \ |
| "\t-h display terse usage information\n" \ |
| USE_FEATURE_HDPARM_GET_IDENTITY("\t-i display drive identification\n") \ |
| USE_FEATURE_HDPARM_GET_IDENTITY("\t-I detailed/current information directly from drive\n") \ |
| "\t-k get/set keep_settings_over_reset flag (0/1)\n" \ |
| "\t-K set drive keep_features_over_reset flag (0/1)\n" \ |
| "\t-L set drive doorlock (0/1) (removable harddisks only)\n" \ |
| "\t-m get/set multiple sector count\n" \ |
| "\t-n get/set ignore-write-errors flag (0/1)\n" \ |
| "\t-p set PIO mode on IDE interface chipset (0,1,2,3,4,...)\n" \ |
| "\t-P set drive prefetch count\n" \ |
| "\t-q change next setting quietly\n" \ |
| "\t-Q get/set DMA tagged-queuing depth (if supported)\n" \ |
| "\t-r get/set readonly flag (DANGEROUS to set)\n" \ |
| USE_FEATURE_HDPARM_HDIO_SCAN_HWIF("\t-R register an IDE interface (DANGEROUS)\n") \ |
| "\t-S set standby (spindown) timeout\n" \ |
| "\t-t perform device read timings\n" \ |
| "\t-T perform cache read timings\n" \ |
| "\t-u get/set unmaskirq flag (0/1)\n" \ |
| USE_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF("\t-U un-register an IDE interface (DANGEROUS)\n") \ |
| "\t-v defaults; same as -mcudkrag for IDE drives\n" \ |
| "\t-V display program version and exit immediately\n" \ |
| USE_FEATURE_HDPARM_HDIO_DRIVE_RESET("\t-w perform device reset (DANGEROUS)\n") \ |
| "\t-W set drive write-caching flag (0/1) (DANGEROUS)\n" \ |
| USE_FEATURE_HDPARM_HDIO_TRISTATE_HWIF("\t-x tristate device for hotswap (0/1) (DANGEROUS)\n") \ |
| "\t-X set IDE xfer mode (DANGEROUS)\n" \ |
| "\t-y put IDE drive in standby mode\n" \ |
| "\t-Y put IDE drive to sleep\n" \ |
| "\t-Z disable Seagate auto-powersaving mode\n" \ |
| "\t-z re-read partition table" |
| |
| #define head_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define head_full_usage \ |
| "Print first 10 lines of each FILE to standard output.\n" \ |
| "With more than one FILE, precede each with a header giving the\n" \ |
| "file name. With no FILE, or when FILE is -, read standard input.\n\n" \ |
| "Options:\n" \ |
| "\t-n NUM\t\tPrint first NUM lines instead of first 10" \ |
| USE_FEATURE_FANCY_HEAD( \ |
| "\n\t-c NUM\t\toutput the first NUM bytes\n" \ |
| "\t-q\t\tnever output headers giving file names\n" \ |
| "\t-v\t\talways output headers giving file names" ) |
| #define head_example_usage \ |
| "$ head -n 2 /etc/passwd\n" \ |
| "root:x:0:0:root:/root:/bin/bash\n" \ |
| "daemon:x:1:1:daemon:/usr/sbin:/bin/sh\n" |
| |
| #define hexdump_trivial_usage \ |
| "[-[bcCdefnosvx]] [OPTION] FILE" |
| #define hexdump_full_usage \ |
| "The hexdump utility is a filter which displays the specified files,\n" \ |
| "or the standard input, if no files are specified, in a user specified\n" \ |
| "format\n" \ |
| "\t-b\t\tOne-byte octal display\n" \ |
| "\t-c\t\tOne-byte character display\n" \ |
| "\t-C\t\tCanonical hex+ASCII, 16 bytes per line\n" \ |
| "\t-d\t\tTwo-byte decimal display\n" \ |
| "\t-e FORMAT STRING\n" \ |
| "\t-f FORMAT FILE\n" \ |
| "\t-n LENGTH\tInterpret only length bytes of input\n" \ |
| "\t-o\t\tTwo-byte octal display\n" \ |
| "\t-s OFFSET\tSkip offset byte\n" \ |
| "\t-v\t\tdisplay all input data\n" \ |
| "\t-x\t\tTwo-byte hexadecimal display" |
| |
| #define hostid_trivial_usage \ |
| "" |
| #define hostid_full_usage \ |
| "Print out a unique 32-bit identifier for the machine." |
| |
| #define hostname_trivial_usage \ |
| "[OPTION] {hostname | -F FILE}" |
| #define hostname_full_usage \ |
| "Get or set the hostname or DNS domain name. If a hostname is given\n" \ |
| "(or FILE with the -F parameter), the host name will be set.\n\n" \ |
| "Options:\n" \ |
| "\t-s\tShort\n" \ |
| "\t-i\tAddresses for the hostname\n" \ |
| "\t-d\tDNS domain name\n" \ |
| "\t-f\tFully qualified domain name\n" \ |
| "\t-F FILE\tUse the contents of FILE to specify the hostname" |
| #define hostname_example_usage \ |
| "$ hostname\n" \ |
| "sage\n" |
| |
| #define httpd_trivial_usage \ |
| "[-c <conf file>]" \ |
| USE_FEATURE_HTTPD_WITHOUT_INETD(" [-p <port>]") \ |
| USE_FEATURE_HTTPD_SETUID(" [-u user]") \ |
| USE_FEATURE_HTTPD_BASIC_AUTH(" [-r <realm>]") \ |
| USE_FEATURE_HTTPD_AUTH_MD5(" [-m pass]") \ |
| " [-h home]" \ |
| " [-d/-e <string>]" |
| #define httpd_full_usage \ |
| "Listens for incoming http server requests.\n\n" \ |
| "Options:\n" \ |
| "\t-c FILE\t\tSpecifies configuration file. (default httpd.conf)\n" \ |
| USE_FEATURE_HTTPD_WITHOUT_INETD("\t-p PORT\tServer port (default 80)\n") \ |
| USE_FEATURE_HTTPD_SETUID("\t-u USER\tSet uid to USER after listening privileges port\n") \ |
| USE_FEATURE_HTTPD_BASIC_AUTH("\t-r REALM\tAuthentication Realm for Basic Authentication\n") \ |
| USE_FEATURE_HTTPD_AUTH_MD5("\t-m PASS\t\tCrypt PASS with md5 algorithm\n") \ |
| "\t-h HOME \tSpecifies http HOME directory (default ./)\n" \ |
| "\t-e STRING\tHtml encode STRING\n" \ |
| "\t-d STRING\tURL decode STRING" |
| |
| #define hwclock_trivial_usage \ |
| "[-r|--show] [-s|--hctosys] [-w|--systohc] [-l|--localtime] [-u|--utc]" |
| #define hwclock_full_usage \ |
| "Query and set the hardware clock (RTC)\n\n" \ |
| "Options:\n" \ |
| "\t-r\tread hardware clock and print result\n" \ |
| "\t-s\tset the system time from the hardware clock\n" \ |
| "\t-w\tset the hardware clock to the current system time\n" \ |
| "\t-u\tthe hardware clock is kept in coordinated universal time\n" \ |
| "\t-l\tthe hardware clock is kept in local time" |
| |
| #ifdef CONFIG_SELINUX |
| # define USAGE_SELINUX(a) a |
| #else |
| # define USAGE_SELINUX(a) |
| #endif |
| |
| #define id_trivial_usage \ |
| "[OPTIONS]... [USERNAME]" |
| #define id_full_usage \ |
| "Print information for USERNAME or the current user\n\n" \ |
| "Options:\n" \ |
| USAGE_SELINUX("\t-c\tprints only the security context\n") \ |
| "\t-g\tprints only the group ID\n" \ |
| "\t-u\tprints only the user ID\n" \ |
| "\t-n\tprint a name instead of a number\n" \ |
| "\t-r\tprints the real user ID instead of the effective ID" |
| #define id_example_usage \ |
| "$ id\n" \ |
| "uid=1000(andersen) gid=1000(andersen)\n" |
| |
| #ifdef CONFIG_FEATURE_IFCONFIG_SLIP |
| # define USAGE_SIOCSKEEPALIVE(a) a |
| #else |
| # define USAGE_SIOCSKEEPALIVE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ |
| # define USAGE_IFCONFIG_MII(a) a |
| #else |
| # define USAGE_IFCONFIG_MII(a) |
| #endif |
| #ifdef CONFIG_FEATURE_IFCONFIG_HW |
| # define USAGE_IFCONFIG_HW(a) a |
| #else |
| # define USAGE_IFCONFIG_HW(a) |
| #endif |
| #ifdef CONFIG_FEATURE_IFCONFIG_STATUS |
| # define USAGE_IFCONFIG_OPT_A(a) a |
| #else |
| # define USAGE_IFCONFIG_OPT_A(a) |
| #endif |
| #ifdef CONFIG_FEATURE_IPV6 |
| # define USAGE_IPV6(a) a |
| #else |
| # define USAGE_IPV6(a) |
| #endif |
| |
| #define ifconfig_trivial_usage \ |
| USAGE_IFCONFIG_OPT_A("[-a]") " <interface> [<address>]" |
| #define ifconfig_full_usage \ |
| "configure a network interface\n\n" \ |
| "Options:\n" \ |
| USAGE_IPV6("\t[add <address>[/<prefixlen>]]\n") \ |
| USAGE_IPV6("\t[del <address>[/<prefixlen>]]\n") \ |
| "\t[[-]broadcast [<address>]] [[-]pointopoint [<address>]]\n" \ |
| "\t[netmask <address>] [dstaddr <address>]\n" \ |
| USAGE_SIOCSKEEPALIVE("\t[outfill <NN>] [keepalive <NN>]\n") \ |
| "\t" USAGE_IFCONFIG_HW("[hw ether <address>] ") \ |
| "[metric <NN>] [mtu <NN>]\n" \ |
| "\t[[-]trailers] [[-]arp] [[-]allmulti]\n" \ |
| "\t[multicast] [[-]promisc] [txqueuelen <NN>] [[-]dynamic]\n" \ |
| USAGE_IFCONFIG_MII("\t[mem_start <NN>] [io_addr <NN>] [irq <NN>]\n") \ |
| "\t[up|down] ..." |
| |
| #define ifup_trivial_usage \ |
| "<-ahinv> <ifaces...>" |
| #define ifup_full_usage \ |
| "ifup <options> <ifaces...>\n\n" \ |
| "Options:\n" \ |
| "\t-h\tthis help\n" \ |
| "\t-a\tde/configure all interfaces automatically\n" \ |
| "\t-i FILE\tuse FILE for interface definitions\n" \ |
| "\t-n\tprint out what would happen, but don't do it\n" \ |
| "\t\t\t(note that this option doesn't disable mappings)\n" \ |
| "\t-v\tprint out what would happen before doing it\n" \ |
| "\t-m\tdon't run any mappings\n" \ |
| "\t-f\tforce de/configuration" |
| |
| #define ifdown_trivial_usage \ |
| "<-ahinv> <ifaces...>" |
| #define ifdown_full_usage \ |
| "ifdown <options> <ifaces...>\n\n" \ |
| "Options:\n" \ |
| "\t-h\tthis help\n" \ |
| "\t-a\tde/configure all interfaces automatically\n" \ |
| "\t-i FILE\tuse FILE for interface definitions\n" \ |
| "\t-n\tprint out what would happen, but don't do it\n" \ |
| "\t\t(note that this option doesn't disable mappings)\n" \ |
| "\t-v\tprint out what would happen before doing it\n" \ |
| "\t-m\tdon't run any mappings\n" \ |
| "\t-f\tforce de/configuration" |
| |
| #define inetd_trivial_usage \ |
| "[-f] [-q len] [conf]" |
| #define inetd_full_usage \ |
| "Listens for network connections and launches programs\n\n" \ |
| "Option:\n" \ |
| "\t-f\tRun as a foreground progress\n" \ |
| "\t-q\tSets the size of the socket listen queue to\n" \ |
| "\t\tthe specified value. Default is 128" |
| |
| #define init_trivial_usage \ |
| "" |
| #define init_full_usage \ |
| "Init is the parent of all processes." |
| #define init_notes_usage \ |
| "This version of init is designed to be run only by the kernel.\n" \ |
| "\n" \ |
| "BusyBox init doesn't support multiple runlevels. The runlevels field of\n" \ |
| "the /etc/inittab file is completely ignored by BusyBox init. If you want \n" \ |
| "runlevels, use sysvinit.\n" \ |
| "\n" \ |
| "BusyBox init works just fine without an inittab. If no inittab is found, \n" \ |
| "it has the following default behavior:\n" \ |
| "\n" \ |
| " ::sysinit:/etc/init.d/rcS\n" \ |
| " ::askfirst:/bin/sh\n" \ |
| " ::ctrlaltdel:/sbin/reboot\n" \ |
| " ::shutdown:/sbin/swapoff -a\n" \ |
| " ::shutdown:/bin/umount -a -r\n" \ |
| " ::restart:/sbin/init\n" \ |
| "\n" \ |
| "if it detects that /dev/console is _not_ a serial console, it will also run:\n" \ |
| "\n" \ |
| " tty2::askfirst:/bin/sh\n" \ |
| " tty3::askfirst:/bin/sh\n" \ |
| " tty4::askfirst:/bin/sh\n" \ |
| "\n" \ |
| "If you choose to use an /etc/inittab file, the inittab entry format is as follows:\n" \ |
| "\n" \ |
| " <id>:<runlevels>:<action>:<process>\n" \ |
| "\n" \ |
| " <id>:\n" \ |
| "\n" \ |
| " WARNING: This field has a non-traditional meaning for BusyBox init!\n" \ |
| " The id field is used by BusyBox init to specify the controlling tty for\n" \ |
| " the specified process to run on. The contents of this field are\n" \ |
| " appended to \"/dev/\" and used as-is. There is no need for this field to\n" \ |
| " be unique, although if it isn't you may have strange results. If this\n" \ |
| " field is left blank, the controlling tty is set to the console. Also\n" \ |
| " note that if BusyBox detects that a serial console is in use, then only\n" \ |
| " entries whose controlling tty is either the serial console or /dev/null\n" \ |
| " will be run. BusyBox init does nothing with utmp. We don't need no\n" \ |
| " stinkin' utmp.\n" \ |
| "\n" \ |
| " <runlevels>:\n" \ |
| "\n" \ |
| " The runlevels field is completely ignored.\n" \ |
| "\n" \ |
| " <action>:\n" \ |
| "\n" \ |
| " Valid actions include: sysinit, respawn, askfirst, wait,\n" \ |
| " once, restart, ctrlaltdel, and shutdown.\n" \ |
| "\n" \ |
| " The available actions can be classified into two groups: actions\n" \ |
| " that are run only once, and actions that are re-run when the specified\n" \ |
| " process exits.\n" \ |
| "\n" \ |
| " Run only-once actions:\n" \ |
| "\n" \ |
| " 'sysinit' is the first item run on boot. init waits until all\n" \ |
| " sysinit actions are completed before continuing. Following the\n" \ |
| " completion of all sysinit actions, all 'wait' actions are run.\n" \ |
| " 'wait' actions, like 'sysinit' actions, cause init to wait until\n" \ |
| " the specified task completes. 'once' actions are asynchronous,\n" \ |
| " therefore, init does not wait for them to complete. 'restart' is\n" \ |
| " the action taken to restart the init process. By default this should\n" \ |
| " simply run /sbin/init, but can be a script which runs pivot_root or it\n" \ |
| " can do all sorts of other interesting things. The 'ctrlaltdel' init\n" \ |
| " actions are run when the system detects that someone on the system\n" \ |
| " console has pressed the CTRL-ALT-DEL key combination. Typically one\n" \ |
| " wants to run 'reboot' at this point to cause the system to reboot.\n" \ |
| " Finally the 'shutdown' action specifies the actions to taken when\n" \ |
| " init is told to reboot. Unmounting filesystems and disabling swap\n" \ |
| " is a very good here\n" \ |
| "\n" \ |
| " Run repeatedly actions:\n" \ |
| "\n" \ |
| " 'respawn' actions are run after the 'once' actions. When a process\n" \ |
| " started with a 'respawn' action exits, init automatically restarts\n" \ |
| " it. Unlike sysvinit, BusyBox init does not stop processes from\n" \ |
| " respawning out of control. The 'askfirst' actions acts just like\n" \ |
| " respawn, except that before running the specified process it\n" \ |
| " displays the line \"Please press Enter to activate this console.\"\n" \ |
| " and then waits for the user to press enter before starting the\n" \ |
| " specified process.\n" \ |
| "\n" \ |
| " Unrecognized actions (like initdefault) will cause init to emit an\n" \ |
| " error message, and then go along with its business. All actions are\n" \ |
| " run in the order they appear in /etc/inittab.\n" \ |
| "\n" \ |
| " <process>:\n" \ |
| "\n" \ |
| " Specifies the process to be executed and its command line.\n" \ |
| "\n" \ |
| "Example /etc/inittab file:\n" \ |
| "\n" \ |
| " # This is run first except when booting in single-user mode.\n" \ |
| " #\n" \ |
| " ::sysinit:/etc/init.d/rcS\n" \ |
| " \n" \ |
| " # /bin/sh invocations on selected ttys\n" \ |
| " #\n" \ |
| " # Start an \"askfirst\" shell on the console (whatever that may be)\n" \ |
| " ::askfirst:-/bin/sh\n" \ |
| " # Start an \"askfirst\" shell on /dev/tty2-4\n" \ |
| " tty2::askfirst:-/bin/sh\n" \ |
| " tty3::askfirst:-/bin/sh\n" \ |
| " tty4::askfirst:-/bin/sh\n" \ |
| " \n" \ |
| " # /sbin/getty invocations for selected ttys\n" \ |
| " #\n" \ |
| " tty4::respawn:/sbin/getty 38400 tty4\n" \ |
| " tty5::respawn:/sbin/getty 38400 tty5\n" \ |
| " \n" \ |
| " \n" \ |
| " # Example of how to put a getty on a serial line (for a terminal)\n" \ |
| " #\n" \ |
| " #::respawn:/sbin/getty -L ttyS0 9600 vt100\n" \ |
| " #::respawn:/sbin/getty -L ttyS1 9600 vt100\n" \ |
| " #\n" \ |
| " # Example how to put a getty on a modem line.\n" \ |
| " #::respawn:/sbin/getty 57600 ttyS2\n" \ |
| " \n" \ |
| " # Stuff to do when restarting the init process\n" \ |
| " ::restart:/sbin/init\n" \ |
| " \n" \ |
| " # Stuff to do before rebooting\n" \ |
| " ::ctrlaltdel:/sbin/reboot\n" \ |
| " ::shutdown:/bin/umount -a -r\n" \ |
| " ::shutdown:/sbin/swapoff -a\n" |
| |
| #ifdef CONFIG_FEATURE_INSMOD_LOAD_MAP |
| # define USAGE_INSMOD_MAP(a) a |
| #else |
| # define USAGE_INSMOD_MAP(a) |
| #endif |
| #define insmod_trivial_usage \ |
| "[OPTION]... MODULE [symbol=value]..." |
| #define insmod_full_usage \ |
| "Loads the specified kernel modules into the kernel.\n\n" \ |
| "Options:\n" \ |
| "\t-f\tForce module to load into the wrong kernel version\n" \ |
| "\t-k\tMake module autoclean-able\n" \ |
| "\t-v\tverbose output\n" \ |
| "\t-q\tquiet output\n" \ |
| "\t-L\tLock to prevent simultaneous loads of a module\n" \ |
| USAGE_INSMOD_MAP("\t-m\tOutput load map to stdout\n") \ |
| "\t-o NAME\tSet internal module name to NAME\n" \ |
| "\t-x\tdo not export externs" |
| |
| #define install_trivial_usage \ |
| "[-cgmops] [sources] <dest|directory>" |
| #define install_full_usage \ |
| "Copies files and set attributes\n\n" \ |
| "Options:\n" \ |
| "\t-c\tcopy the file, default\n" \ |
| "\t-d\tcreate directories\n" \ |
| "\t-g\tset group ownership\n" \ |
| "\t-m\tset permission modes\n" \ |
| "\t-o\tset ownership\n" \ |
| "\t-p\tpreserve date\n" \ |
| "\t-s\tstrip symbol tables" |
| |
| #define ip_trivial_usage \ |
| "[ OPTIONS ] { address | link | route | tunnel } { COMMAND | help }" |
| #define ip_full_usage \ |
| "ip [ OPTIONS ] OBJECT { COMMAND | help }\n" \ |
| "where OBJECT := { link | addr | route | tunnel }\n" \ |
| "OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }" |
| |
| #define ipaddr_trivial_usage \ |
| "{ {add|del} IFADDR dev STRING | {show|flush}\n" \ |
| "\t\t[ dev STRING ] [ to PREFIX ] }" |
| #define ipaddr_full_usage \ |
| "ipaddr {add|delete} IFADDR dev STRING\n" \ |
| "ipaddr {show|flush} [ dev STRING ] [ scope SCOPE-ID ]\n" \ |
| "\t\t\t[ to PREFIX ] [ label PATTERN ]\n" \ |
| "\t\t\tIFADDR := PREFIX | ADDR peer PREFIX\n" \ |
| "\t\t\t[ broadcast ADDR ] [ anycast ADDR ]\n" \ |
| "\t\t\t[ label STRING ] [ scope SCOPE-ID ]\n" \ |
| "\t\t\tSCOPE-ID := [ host | link | global | NUMBER ]" |
| |
| #ifdef CONFIG_FEATURE_IPCALC_FANCY |
| # define XUSAGE_IPCALC_FANCY(a) a |
| #else |
| # define XUSAGE_IPCALC_FANCY(a) |
| #endif |
| #define ipcalc_trivial_usage \ |
| "[OPTION]... <ADDRESS>[[/]<NETMASK>] [NETMASK]" |
| #define ipcalc_full_usage \ |
| "Calculate IP network settings from a IP address\n\n" \ |
| "Options:\n" \ |
| "\t-b\t--broadcast\tDisplay calculated broadcast address\n" \ |
| "\t-n\t--network\tDisplay calculated network address\n" \ |
| "\t-m\t--netmask\tDisplay default netmask for IP" \ |
| XUSAGE_IPCALC_FANCY( \ |
| "\n\t-p\t--prefix\tDisplay the prefix for IP/NETMASK\n" \ |
| "\t-h\t--hostname\tDisplay first resolved host name\n" \ |
| "\t-s\t--silent\tDon't ever display error messages") |
| |
| #define ipcrm_trivial_usage \ |
| "[-[MQS] key] [-[mqs] id]" |
| #define ipcrm_full_usage \ |
| "The upper-case options MQS are used to remove a shared memory\n" \ |
| "segment by an shmkey value. The lower-case options mqs are used\n" \ |
| "to remove a segment by shmid value.\n" \ |
| "\t-m | -M\tRemove the memory segment after the last detach\n" \ |
| "\t-q | -Q\tRemove the message queue\n" \ |
| "\t-s | -S\tRemove the semaphore" |
| |
| #define ipcs_trivial_usage \ |
| "[[-smq] -i shmid] | [[-asmq] [-tclup]]" |
| #define ipcs_full_usage \ |
| "\t-i\tspecify a specific resource id\n" \ |
| "Resource specification:\n" \ |
| "\t-m\tshared memory segments\n" \ |
| "\t-q\tmessage queues\n" \ |
| "\t-s\tsemaphore arrays\n" \ |
| "\t-a\tall (default)\n" \ |
| "Output format:\n" \ |
| "\t-t\ttime\n" \ |
| "\t-p\tpid\n" \ |
| "\t-s\tcreator\n" \ |
| "\t-a\tlimits\n" \ |
| "\t-i\tsummary" |
| |
| #define iplink_trivial_usage \ |
| "{ set DEVICE { up | down | arp { on | off } | show [ DEVICE ] }" |
| #define iplink_full_usage \ |
| "iplink set DEVICE { up | down | arp { on | off } |\n" \ |
| "\t\t\tdynamic { on | off } |\n" \ |
| "\t\t\tmtu MTU }\n" \ |
| "\tiplink show [ DEVICE ]" |
| |
| #define iproute_trivial_usage \ |
| "{ list | flush | { add | del | change | append |\n" \ |
| "\t\treplace | monitor } ROUTE }" |
| #define iproute_full_usage \ |
| "iproute { list | flush } SELECTOR\n" \ |
| "iproute get ADDRESS [ from ADDRESS iif STRING ]\n" \ |
| "\t\t\t[ oif STRING ] [ tos TOS ]\n" \ |
| "\tiproute { add | del | change | append | replace | monitor } ROUTE\n" \ |
| "\t\t\tSELECTOR := [ root PREFIX ] [ match PREFIX ] [ proto RTPROTO ]\n" \ |
| "\t\t\tROUTE := [ TYPE ] PREFIX [ tos TOS ] [ proto RTPROTO ]" |
| |
| #define iptunnel_trivial_usage \ |
| "{ add | change | del | show } [ NAME ]\n" \ |
| "\t\t[ mode { ipip | gre | sit } ]\n" \ |
| "\t\t[ remote ADDR ] [ local ADDR ] [ ttl TTL ]" |
| #define iptunnel_full_usage \ |
| "iptunnel { add | change | del | show } [ NAME ]\n" \ |
| "\t\t\t[ mode { ipip | gre | sit } ] [ remote ADDR ] [ local ADDR ]\n" \ |
| "\t\t\t[ [i|o]seq ] [ [i|o]key KEY ] [ [i|o]csum ]\n" \ |
| "\t\t\t[ ttl TTL ] [ tos TOS ] [ [no]pmtudisc ] [ dev PHYS_DEV ]" |
| |
| #define kill_trivial_usage \ |
| "[-signal] process-id [process-id ...]" |
| #define kill_full_usage \ |
| "Send a signal (default is SIGTERM) to the specified process(es).\n\n" \ |
| "Options:\n" \ |
| "\t-l\tList all signal names and numbers" |
| #define kill_example_usage \ |
| "$ ps | grep apache\n" \ |
| "252 root root S [apache]\n" \ |
| "263 www-data www-data S [apache]\n" \ |
| "264 www-data www-data S [apache]\n" \ |
| "265 www-data www-data S [apache]\n" \ |
| "266 www-data www-data S [apache]\n" \ |
| "267 www-data www-data S [apache]\n" \ |
| "$ kill 252\n" |
| |
| #define killall_trivial_usage \ |
| "[-q] [-signal] process-name [process-name ...]" |
| #define killall_full_usage \ |
| "Send a signal (default is SIGTERM) to the specified process(es).\n\n" \ |
| "Options:\n" \ |
| "\t-l\tList all signal names and numbers\n" \ |
| "\t-q\tDo not complain if no processes were killed" |
| #define killall_example_usage \ |
| "$ killall apache\n" |
| |
| #define klogd_trivial_usage \ |
| "[-c n] [-n]" |
| #define klogd_full_usage \ |
| "Kernel logger.\n" \ |
| "Options:\n" \ |
| "\t-c n\tSets the default log level of console messages to n\n" \ |
| "\t-n\tRun as a foreground process" |
| |
| #define length_trivial_usage \ |
| "STRING" |
| #define length_full_usage \ |
| "Prints out the length of the specified STRING." |
| #define length_example_usage \ |
| "$ length Hello\n" \ |
| "5\n" |
| |
| #define less_trivial_usage \ |
| "[-EMNmh~?] FILE1 FILE2..." |
| #define less_full_usage \ |
| "View a file or list of files. The position within files can be\n" \ |
| "changed, and files can be manipulated in various ways with the\n" \ |
| "following options:\n\n" \ |
| "\t-E\tQuit once the end of a file is reached\n" \ |
| "\t-M\tDisplay a status line containing the current line numbers\n" \ |
| "\t\tand the percentage through the file\n" \ |
| "\t-N\tPrefix line numbers to each line\n" \ |
| "\t-m\tDisplay a status line containing the percentage through the\n" \ |
| "\t\tfile\n" \ |
| "\t-~\tSuppress ~s displayed when input past the end of the file is\n" \ |
| "\t\treached.\n" \ |
| "\t-h, -?\tDisplay this help message" |
| |
| #define setarch_trivial_usage \ |
| "<personality> <program> [args ...]" |
| #define setarch_full_usage \ |
| "Personality may be:\n" \ |
| "\tlinux32\tSet 32bit uname emulation\n" \ |
| "\tlinux64\tSet 64bit uname emulation" |
| |
| #define ln_trivial_usage \ |
| "[OPTION] TARGET... LINK_NAME|DIRECTORY" |
| #define ln_full_usage \ |
| "Create a link named LINK_NAME or DIRECTORY to the specified TARGET\n" \ |
| "\nYou may use '--' to indicate that all following arguments are non-options.\n\n" \ |
| "Options:\n" \ |
| "\t-s\tmake symbolic links instead of hard links\n" \ |
| "\t-f\tremove existing destination files\n" \ |
| "\t-n\tno dereference symlinks - treat like normal file\n" \ |
| "\t-b\tmake a backup of the target (if exists) before link operation\n" \ |
| "\t-S suffix\tuse suffix instead of ~ when making backup files" |
| #define ln_example_usage \ |
| "$ ln -s BusyBox /tmp/ls\n" \ |
| "$ ls -l /tmp/ls\n" \ |
| "lrwxrwxrwx 1 root root 7 Apr 12 18:39 ls -> BusyBox*\n" |
| |
| #define loadfont_trivial_usage \ |
| "< font" |
| #define loadfont_full_usage \ |
| "Loads a console font from standard input." |
| #define loadfont_example_usage \ |
| "$ loadfont < /etc/i18n/fontname\n" |
| |
| #define loadkmap_trivial_usage \ |
| "< keymap" |
| #define loadkmap_full_usage \ |
| "Loads a binary keyboard translation table from standard input." |
| #define loadkmap_example_usage \ |
| "$ loadkmap < /etc/i18n/lang-keymap\n" |
| |
| #define logger_trivial_usage \ |
| "[OPTION]... [MESSAGE]" |
| #define logger_full_usage \ |
| "Write MESSAGE to the system log. If MESSAGE is omitted, log stdin.\n\n" \ |
| "Options:\n" \ |
| "\t-s\tLog to stderr as well as the system log\n" \ |
| "\t-t TAG\tLog using the specified tag (defaults to user name)\n" \ |
| "\t-p PRIORITY\tEnter the message with the specified priority\n" \ |
| "\t\tThis may be numerical or a ``facility.level'' pair" |
| #define logger_example_usage \ |
| "$ logger \"hello\"\n" |
| |
| #define login_trivial_usage \ |
| "[OPTION]... [username] [ENV=VAR ...]" |
| #define login_full_usage \ |
| "Begin a new session on the system\n\n" \ |
| "Options:\n" \ |
| "\t-f\tDo not authenticate (user already authenticated)\n" \ |
| "\t-h\tName of the remote host for this login\n" \ |
| "\t-p\tPreserve environment" |
| |
| #define logname_trivial_usage \ |
| "" |
| #define logname_full_usage \ |
| "Print the name of the current user." |
| #define logname_example_usage \ |
| "$ logname\n" \ |
| "root\n" |
| |
| #define logread_trivial_usage \ |
| "[OPTION]..." |
| #define logread_full_usage \ |
| "Shows the messages from syslogd (using circular buffer).\n\n" \ |
| "Options:\n" \ |
| "\t-f\t\toutput data as the log grows" |
| |
| #define losetup_trivial_usage \ |
| "[-od] LOOPDEVICE [FILE]" |
| #define losetup_full_usage \ |
| "Associate LOOPDEVICE with FILE, or display current association.\n\n" \ |
| "Options:\n" \ |
| "\t-d\t\tDisassociate LOOPDEVICE\n" \ |
| "\t-o OFFSET\tStart OFFSET bytes into FILE" |
| #define losetup_notes_usage \ |
| "One argument (losetup /dev/loop1) will display the current association\n" \ |
| "(if any), or disassociate it (with -d). The display shows the offset\n" \ |
| "and filename of the file the loop device is currently bound to.\n\n" \ |
| "Two arguments (losetup /dev/loop1 file.img) create a new association,\n" \ |
| "with an optional offset (-o 12345). Encryption is not yet supported.\n\n" |
| |
| #ifdef CONFIG_FEATURE_LS_TIMESTAMPS |
| # define USAGE_LS_TIMESTAMPS(a) a |
| #else |
| # define USAGE_LS_TIMESTAMPS(a) |
| #endif |
| #ifdef CONFIG_FEATURE_LS_FILETYPES |
| # define USAGE_LS_FILETYPES(a) a |
| #else |
| # define USAGE_LS_FILETYPES(a) |
| #endif |
| #ifdef CONFIG_FEATURE_LS_FOLLOWLINKS |
| # define USAGE_LS_FOLLOWLINKS(a) a |
| #else |
| # define USAGE_LS_FOLLOWLINKS(a) |
| #endif |
| #ifdef CONFIG_FEATURE_LS_RECURSIVE |
| # define USAGE_LS_RECURSIVE(a) a |
| #else |
| # define USAGE_LS_RECURSIVE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_LS_SORTFILES |
| # define USAGE_LS_SORTFILES(a) a |
| #else |
| # define USAGE_LS_SORTFILES(a) |
| #endif |
| #ifdef CONFIG_FEATURE_AUTOWIDTH |
| # define USAGE_AUTOWIDTH(a) a |
| #else |
| # define USAGE_AUTOWIDTH(a) |
| #endif |
| #ifdef CONFIG_FEATURE_LS_COLOR |
| #define USAGE_LS_COLOR(a) a |
| #else |
| #define USAGE_LS_COLOR(a) |
| #endif |
| |
| #define ls_trivial_usage \ |
| "[-1Aa" USAGE_LS_TIMESTAMPS("c") "Cd" USAGE_LS_TIMESTAMPS("e") USAGE_LS_FILETYPES("F") "iln" USAGE_LS_FILETYPES("p") USAGE_LS_FOLLOWLINKS("L") USAGE_LS_RECURSIVE("R") USAGE_LS_SORTFILES("rS") "s" USAGE_AUTOWIDTH("T") USAGE_LS_TIMESTAMPS("tu") USAGE_LS_SORTFILES("v") USAGE_AUTOWIDTH("w") "x" USAGE_LS_SORTFILES("X") USE_FEATURE_HUMAN_READABLE("h") "k" USAGE_SELINUX("K") "] [filenames...]" |
| #define ls_full_usage \ |
| "List directory contents\n\n" \ |
| "Options:\n" \ |
| "\t-1\tlist files in a single column\n" \ |
| "\t-A\tdo not list implied . and ..\n" \ |
| "\t-a\tdo not hide entries starting with .\n" \ |
| "\t-C\tlist entries by columns\n" \ |
| USAGE_LS_TIMESTAMPS("\t-c\twith -l: show ctime\n") \ |
| USAGE_LS_COLOR("\t--color[={always,never,auto}]\tto control coloring\n") \ |
| "\t-d\tlist directory entries instead of contents\n" \ |
| USAGE_LS_TIMESTAMPS("\t-e\tlist both full date and full time\n") \ |
| USAGE_LS_FILETYPES("\t-F\tappend indicator (one of */=@|) to entries\n") \ |
| "\t-i\tlist the i-node for each file\n" \ |
| "\t-l\tuse a long listing format\n" \ |
| "\t-n\tlist numeric UIDs and GIDs instead of names\n" \ |
| USAGE_LS_FILETYPES("\t-p\tappend indicator (one of /=@|) to entries\n") \ |
| USAGE_LS_FOLLOWLINKS("\t-L\tlist entries pointed to by symbolic links\n") \ |
| USAGE_LS_RECURSIVE("\t-R\tlist subdirectories recursively\n") \ |
| USAGE_LS_SORTFILES("\t-r\tsort the listing in reverse order\n") \ |
| USAGE_LS_SORTFILES("\t-S\tsort the listing by file size\n") \ |
| "\t-s\tlist the size of each file, in blocks\n" \ |
| USAGE_AUTOWIDTH("\t-T NUM\tassume Tabstop every NUM columns\n") \ |
| USAGE_LS_TIMESTAMPS("\t-t\twith -l: show modification time\n") \ |
| USAGE_LS_TIMESTAMPS("\t-u\twith -l: show access time\n") \ |
| USAGE_LS_SORTFILES("\t-v\tsort the listing by version\n") \ |
| USAGE_AUTOWIDTH("\t-w NUM\tassume the terminal is NUM columns wide\n") \ |
| "\t-x\tlist entries by lines instead of by columns\n" \ |
| USAGE_LS_SORTFILES("\t-X\tsort the listing by extension\n") \ |
| USE_FEATURE_HUMAN_READABLE( \ |
| "\t-h\tprint sizes in human readable format (e.g., 1K 243M 2G )\n") \ |
| USAGE_SELINUX("\t-k\tprint security context\n") \ |
| USAGE_SELINUX("\t-K\tprint security context in long format\n") |
| |
| #define lsattr_trivial_usage \ |
| "[-Radlv] [files...]" |
| #define lsattr_full_usage \ |
| "list file attributes on an ext2 fs\n\n" \ |
| "Options:\n" \ |
| "\t-R\trecursively list subdirectories\n" \ |
| "\t-a\tdo not hide entries starting with .\n" \ |
| "\t-d\tlist directory entries instead of contents\n" \ |
| "\t-l\tprint long flag names\n" \ |
| "\t-v\tlist the file's version/generation number" |
| |
| #define lsmod_trivial_usage \ |
| "" |
| #define lsmod_full_usage \ |
| "List the currently loaded kernel modules." |
| |
| #ifdef CONFIG_FEATURE_MAKEDEVS_LEAF |
| #define makedevs_trivial_usage \ |
| "NAME TYPE MAJOR MINOR FIRST LAST [s]" |
| #define makedevs_full_usage \ |
| "Creates a range of block or character special files\n\n" \ |
| "TYPEs include:\n" \ |
| "\tb:\tMake a block (buffered) device.\n" \ |
| "\tc or u:\tMake a character (un-buffered) device.\n" \ |
| "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes.\n\n" \ |
| "FIRST specifies the number appended to NAME to create the first device.\n" \ |
| "LAST specifies the number of the last item that should be created\n" \ |
| "If 's' is the last argument, the base device is created as well.\n\n" \ |
| "For example:\n" \ |
| "\tmakedevs /dev/ttyS c 4 66 2 63 -> ttyS2-ttyS63\n" \ |
| "\tmakedevs /dev/hda b 3 0 0 8 s -> hda,hda1-hda8" |
| #define makedevs_example_usage \ |
| "# makedevs /dev/ttyS c 4 66 2 63\n" \ |
| "[creates ttyS2-ttyS63]\n" \ |
| "# makedevs /dev/hda b 3 0 0 8 s\n" \ |
| "[creates hda,hda1-hda8]\n" |
| #endif |
| |
| #ifdef CONFIG_FEATURE_MAKEDEVS_TABLE |
| #define makedevs_trivial_usage \ |
| "[-d device_table] rootdir" |
| #define makedevs_full_usage \ |
| "Creates a range of special files as specified in a device table.\n" \ |
| "Device table entries take the form of:\n" \ |
| "<type> <mode> <uid> <gid> <major> <minor> <start> <inc> <count>\n" \ |
| "Where name is the file name, type can be one of:\n" \ |
| " f A regular file\n" \ |
| " d Directory\n" \ |
| " c Character special device file\n" \ |
| " b Block special device file\n" \ |
| " p Fifo (named pipe)\n" \ |
| "uid is the user id for the target file, gid is the group id for the\n" \ |
| "target file. The rest of the entries (major, minor, etc) apply to\n" \ |
| "to device special files. A '-' may be used for blank entries." |
| #define makedevs_example_usage \ |
| "For example:\n" \ |
| "<name> <type> <mode><uid><gid><major><minor><start><inc><count>\n" \ |
| "/dev d 755 0 0 - - - - -\n" \ |
| "/dev/console c 666 0 0 5 1 - - -\n" \ |
| "/dev/null c 666 0 0 1 3 0 0 -\n" \ |
| "/dev/zero c 666 0 0 1 5 0 0 -\n" \ |
| "/dev/hda b 640 0 0 3 0 0 0 -\n" \ |
| "/dev/hda b 640 0 0 3 1 1 1 15\n\n" \ |
| "Will Produce:\n" \ |
| "/dev\n" \ |
| "/dev/console\n" \ |
| "/dev/null\n" \ |
| "/dev/zero\n" \ |
| "/dev/hda\n" \ |
| "/dev/hda[0-15]\n" |
| #endif |
| |
| #ifdef CONFIG_FEATURE_MD5_SHA1_SUM_CHECK |
| #define USAGE_MD5_SHA1_SUM_CHECK(a) a |
| #else |
| #define USAGE_MD5_SHA1_SUM_CHECK(a) |
| #endif |
| |
| #define md5sum_trivial_usage \ |
| "[OPTION] [FILEs...]" \ |
| USAGE_MD5_SHA1_SUM_CHECK("\n or: md5sum [OPTION] -c [FILE]") |
| #define md5sum_full_usage \ |
| "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " MD5 checksums.\n\n" \ |
| "Options:\n" \ |
| "With no FILE, or when FILE is -, read standard input." \ |
| USAGE_MD5_SHA1_SUM_CHECK("\n\n" \ |
| "\t-c\tcheck MD5 sums against given list\n" \ |
| "\nThe following two options are useful only when verifying checksums:\n" \ |
| "\t-s\tdon't output anything, status code shows success\n" \ |
| "\t-w\twarn about improperly formated MD5 checksum lines") |
| #define md5sum_example_usage \ |
| "$ md5sum < busybox\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003\n" \ |
| "$ md5sum busybox\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ |
| "$ md5sum -c -\n" \ |
| "6fd11e98b98a58f64ff3398d7b324003 busybox\n" \ |
| "busybox: OK\n" \ |
| "^D\n" |
| |
| #define mdev_trivial_usage \ |
| "[-s]" |
| #define mdev_full_usage \ |
| "\t-s\tScan /sys and populate /dev during system boot\n\n" \ |
| "Called with no options (via hotplug) it uses environment variables\n" \ |
| "to determine which device to add/remove." |
| #define mdev_notes_usage "" \ |
| USE_FEATURE_MDEV_CONFIG( \ |
| "The mdev config file contains lines that look like:\n" \ |
| " hd[a-z][0-9]* 0:3 660\n\n" \ |
| "That's device name (with regex match), uid:gid, and permissions.\n\n" \ |
| USE_FEATURE_MDEV_EXEC( \ |
| "Optionally, that can be followed (on the same line) by a special character\n" \ |
| "and a command line to run after creating/before deleting the corresponding\n" \ |
| "device(s). The environment variable $MDEV indicates the active device node\n" \ |
| "(which is useful if it's a regex match). For example:\n\n" \ |
| " hdc root:cdrom 660 *ln -s $MDEV cdrom\n\n" \ |
| "The special characters are @ (run after creating), $ (run before deleting),\n" \ |
| "and * (run both after creating and before deleting). The commands run in\n" \ |
| "the /dev directory, and use system() which calls /bin/sh.\n\n" \ |
| ) \ |
| "Config file parsing stops on the first matching line. If no config\n"\ |
| "entry is matched, devices are created with default 0:0 660. (Make\n"\ |
| "the last line match .* to override this.)\n\n" \ |
| ) |
| |
| #define mesg_trivial_usage \ |
| "[y|n]" |
| #define mesg_full_usage \ |
| "mesg controls write access to your terminal\n" \ |
| "\ty\tAllow write access to your terminal\n" \ |
| "\tn\tDisallow write access to your terminal" |
| |
| #define mkdir_trivial_usage \ |
| "[OPTION] DIRECTORY..." |
| #define mkdir_full_usage \ |
| "Create the DIRECTORY(ies) if they do not already exist\n\n" \ |
| "Options:\n" \ |
| "\t-m\tset permission mode (as in chmod), not rwxrwxrwx - umask\n" \ |
| "\t-p\tno error if existing, make parent directories as needed" |
| #define mkdir_example_usage \ |
| "$ mkdir /tmp/foo\n" \ |
| "$ mkdir /tmp/foo\n" \ |
| "/tmp/foo: File exists\n" \ |
| "$ mkdir /tmp/foo/bar/baz\n" \ |
| "/tmp/foo/bar/baz: No such file or directory\n" \ |
| "$ mkdir -p /tmp/foo/bar/baz\n" |
| |
| #define mke2fs_trivial_usage \ |
| "[-c|-l filename] [-b block-size] [-f fragment-size] [-g blocks-per-group] " \ |
| "[-i bytes-per-inode] [-j] [-J journal-options] [-N number-of-inodes] [-n] " \ |
| "[-m reserved-blocks-percentage] [-o creator-os] [-O feature[,...]] [-q] " \ |
| "[r fs-revision-level] [-E extended-options] [-v] [-F] [-L volume-label] " \ |
| "[-M last-mounted-directory] [-S] [-T filesystem-type] " \ |
| "device [blocks-count]" |
| #define mke2fs_full_usage \ |
| "\t-b size\tblock size in bytes\n" \ |
| "\t-c\tcheck for bad blocks before creating\n" \ |
| "\t-E opts\tset extended options\n" \ |
| "\t-f size\tfragment size in bytes\n" \ |
| "\t-F\tforce (ignore sanity checks)\n" \ |
| "\t-g num\tnumber of blocks in a block group\n" \ |
| "\t-i ratio\tthe bytes/inode ratio\n" \ |
| "\t-j\tcreate a journal (ext3)\n" \ |
| "\t-J opts\tset journal options (size/device)\n" \ |
| "\t-l file\tread bad blocks list from file\n" \ |
| "\t-L lbl\tset the volume label\n" \ |
| "\t-m percent\tpercent of fs blocks to reserve for admin\n" \ |
| "\t-M dir\tset last mounted directory\n" \ |
| "\t-n\tdo not actually create anything\n" \ |
| "\t-N num\tnumber of inodes to create\n" \ |
| "\t-o os\tset the 'creator os' field\n" \ |
| "\t-O features\tdir_index/filetype/has_journal/journal_dev/sparse_super\n" \ |
| "\t-q\tquiet execution\n" \ |
| "\t-r rev\tset filesystem revision\n" \ |
| "\t-S\twrite superblock and group descriptors only\n" \ |
| "\t-T fs-type\tset usage type (news/largefile/largefile4)\n" \ |
| "\t-v\tverbose execution" |
| |
| #define mkfifo_trivial_usage \ |
| "[OPTIONS] name" |
| #define mkfifo_full_usage \ |
| "Creates a named pipe (identical to 'mknod name p')\n\n" \ |
| "Options:\n" \ |
| "\t-m\tcreate the pipe using the specified mode (default a=rw)" |
| |
| #define mkfs_minix_trivial_usage \ |
| "[-c | -l filename] [-nXX] [-iXX] /dev/name [blocks]" |
| #define mkfs_minix_full_usage \ |
| "Make a MINIX filesystem.\n\n" \ |
| "Options:\n" \ |
| "\t-c\t\tCheck the device for bad blocks\n" \ |
| "\t-n [14|30]\tSpecify the maximum length of filenames\n" \ |
| "\t-i INODES\tSpecify the number of inodes for the filesystem\n" \ |
| "\t-l FILENAME\tRead the bad blocks list from FILENAME\n" \ |
| "\t-v\t\tMake a Minix version 2 filesystem" |
| |
| #define mknod_trivial_usage \ |
| "[OPTIONS] NAME TYPE MAJOR MINOR" |
| #define mknod_full_usage \ |
| "Create a special file (block, character, or pipe).\n\n" \ |
| "Options:\n" \ |
| "\t-m\tcreate the special file using the specified mode (default a=rw)\n\n" \ |
| "TYPEs include:\n" \ |
| "\tb:\tMake a block (buffered) device\n" \ |
| "\tc or u:\tMake a character (un-buffered) device\n" \ |
| "\tp:\tMake a named pipe. MAJOR and MINOR are ignored for named pipes" |
| #define mknod_example_usage \ |
| "$ mknod /dev/fd0 b 2 0\n" \ |
| "$ mknod -m 644 /tmp/pipe p\n" |
| |
| #define mkswap_trivial_usage \ |
| "[-c] [-v0|-v1] device [block-count]" |
| #define mkswap_full_usage \ |
| "Prepare a disk partition to be used as a swap partition.\n\n" \ |
| "Options:\n" \ |
| "\t-c\t\tCheck for read-ability\n" \ |
| "\t-v0\t\tMake version 0 swap [max 128 Megs]\n" \ |
| "\t-v1\t\tMake version 1 swap [big!] (default for kernels >\n\t\t\t2.1.117)\n" \ |
| "\tblock-count\tNumber of block to use (default is entire partition)" |
| |
| #define mktemp_trivial_usage \ |
| "[-dq] TEMPLATE" |
| #define mktemp_full_usage \ |
| "Creates a temporary file with its name based on TEMPLATE.\n" \ |
| "TEMPLATE is any name with six `Xs' (i.e., /tmp/temp.XXXXXX).\n\n" \ |
| "Options:\n" \ |
| "\t-d\t\tMake a directory instead of a file\n" \ |
| "\t-q\t\tFail silently if an error occurs" |
| #define mktemp_example_usage \ |
| "$ mktemp /tmp/temp.XXXXXX\n" \ |
| "/tmp/temp.mWiLjM\n" \ |
| "$ ls -la /tmp/temp.mWiLjM\n" \ |
| "-rw------- 1 andersen andersen 0 Apr 25 17:10 /tmp/temp.mWiLjM\n" |
| |
| #define modprobe_trivial_usage \ |
| "[-knqrsv] MODULE [symbol=value ...]" |
| #define modprobe_full_usage \ |
| "Options:\n" \ |
| "\t-k\tMake module autoclean-able\n" \ |
| "\t-n\tJust show what would be done\n" \ |
| "\t-q\tQuiet output\n" \ |
| "\t-r\tRemove module (stacks) or do autoclean\n" \ |
| "\t-s\tReport via syslog instead of stderr\n" \ |
| "\t-v\tVerbose output" |
| #define modprobe_notes_usage \ |
| "modprobe can (un)load a stack of modules, passing each module options (when\n" \ |
| "loading). modprobe uses a configuration file to determine what option(s) to\n" \ |
| "pass each module it loads.\n" \ |
| "\n" \ |
| "The configuration file is searched (in order) amongst:\n" \ |
| "\n" \ |
| " /etc/modprobe.conf (2.6 only)\n" \ |
| " /etc/modules.conf\n" \ |
| " /etc/conf.modules (deprecated)\n" \ |
| "\n" \ |
| "They all have the same syntax (see below). If none is present, it is\n" \ |
| "_not_ an error; each loaded module is then expected to load without\n" \ |
| "options. Once a file is found, the others are tested for.\n" \ |
| "\n" \ |
| "/etc/modules.conf entry format:\n" \ |
| "\n" \ |
| " alias <alias_name> <mod_name>\n" \ |
| " Makes it possible to modprobe alias_name, when there is no such module.\n" \ |
| " It makes sense if your mod_name is long, or you want a more representative\n" \ |
| " name for that module (eg. 'scsi' in place of 'aha7xxx').\n" \ |
| " This makes it also possible to use a different set of options (below) for\n" \ |
| " the module and the alias.\n" \ |
| " A module can be aliased more than once.\n" \ |
| "\n" \ |
| " options <mod_name|alias_name> <symbol=value ...>\n" \ |
| " When loading module mod_name (or the module aliased by alias_name), pass\n" \ |
| " the \"symbol=value\" pairs as option to that module.\n" \ |
| "\n" \ |
| "Sample /etc/modules.conf file:\n" \ |
| "\n" \ |
| " options tulip irq=3\n" \ |
| " alias tulip tulip2\n" \ |
| " options tulip2 irq=4 io=0x308\n" \ |
| "\n" \ |
| "Other functionality offered by 'classic' modprobe is not available in\n" \ |
| "this implementation.\n" \ |
| "\n" \ |
| "If module options are present both in the config file, and on the command line,\n" \ |
| "then the options from the command line will be passed to the module _after_\n" \ |
| "the options from the config file. That way, you can have defaults in the config\n" \ |
| "file, and override them for a specific usage from the command line.\n" |
| #define modprobe_example_usage \ |
| "(with the above /etc/modules.conf):\n\n" \ |
| "$ modprobe tulip\n" \ |
| " will load the module 'tulip' with default option 'irq=3'\n\n" \ |
| "$ modprobe tulip irq=5\n" \ |
| " will load the module 'tulip' with option 'irq=5', thus overriding the default\n\n" \ |
| "$ modprobe tulip2\n" \ |
| " will load the module 'tulip' with default options 'irq=4 io=0x308',\n" \ |
| " which are the default for alias 'tulip2'\n\n" \ |
| "$ modprobe tulip2 irq=8\n" \ |
| " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=8',\n" \ |
| " which are the default for alias 'tulip2' overridden by the option 'irq=8'\n\n" \ |
| " from the command line\n\n" \ |
| "$ modprobe tulip2 irq=2 io=0x210\n" \ |
| " will load the module 'tulip' with default options 'irq=4 io=0x308 irq=4 io=0x210',\n" \ |
| " which are the default for alias 'tulip2' overridden by the options 'irq=2 io=0x210'\n\n" \ |
| " from the command line\n" |
| |
| #define more_trivial_usage \ |
| "[FILE ...]" |
| #define more_full_usage \ |
| "More is a filter for viewing FILE one screenful at a time." |
| #define more_example_usage \ |
| "$ dmesg | more\n" |
| |
| #ifdef CONFIG_FEATURE_MOUNT_LOOP |
| # define USAGE_MOUNT_LOOP(a) a |
| #else |
| # define USAGE_MOUNT_LOOP(a) |
| #endif |
| #ifdef CONFIG_FEATURE_MTAB_SUPPORT |
| # define USAGE_MTAB(a) a |
| #else |
| # define USAGE_MTAB(a) |
| #endif |
| #define mount_trivial_usage \ |
| "[flags] DEVICE NODE [-o options,more-options]" |
| #define mount_full_usage \ |
| "Mount a filesystem. Filesystem autodetection requires /proc be mounted.\n\n" \ |
| "Flags:\n" \ |
| "\t-a:\t\tMount all filesystems in fstab\n" \ |
| USAGE_MTAB( \ |
| "\t-f:\t\t\"Fake\" Add entry to mount table but don't mount it\n" \ |
| "\t-n:\t\tDon't write a mount table entry\n" \ |
| ) \ |
| "\t-o option:\tOne of many filesystem options, listed below\n" \ |
| "\t-r:\t\tMount the filesystem read-only\n" \ |
| "\t-t fs-type:\tSpecify the filesystem type\n" \ |
| "\t-w:\t\tMount for reading and writing (default)\n" \ |
| "\n" \ |
| "Options for use with the \"-o\" flag:\n" \ |
| "\tasync/sync:\tWrites are asynchronous / synchronous\n" \ |
| "\tatime/noatime:\tEnable / disable updates to inode access times\n" \ |
| "\tdev/nodev:\tAllow use of special device files / disallow them\n" \ |
| "\texec/noexec:\tAllow use of executable files / disallow them\n" \ |
| USAGE_MOUNT_LOOP( \ |
| "\tloop:\t\t Ignored (loop devices are autodetected)\n" \ |
| ) \ |
| "\tsuid/nosuid:\tAllow set-user-id-root programs / disallow them\n" \ |
| "\tremount:\tRe-mount a mounted filesystem, changing its flags\n" \ |
| "\tro/rw:\t\tMount for read-only / read-write\n" \ |
| "\tbind:\t\tBind a directory to an additional location\n" \ |
| "\tmove:\t\tRelocate an existing mount point.\n" \ |
| "\nThere are EVEN MORE flags that are specific to each filesystem\n" \ |
| "You'll have to see the written documentation for those filesystems" |
| #define mount_example_usage \ |
| "$ mount\n" \ |
| "/dev/hda3 on / type minix (rw)\n" \ |
| "proc on /proc type proc (rw)\n" \ |
| "devpts on /dev/pts type devpts (rw)\n" \ |
| "$ mount /dev/fd0 /mnt -t msdos -o ro\n" \ |
| "$ mount /tmp/diskimage /opt -t ext2 -o loop\n" \ |
| "$ mount cd_image.iso mydir\n" |
| #define mount_notes_usage \ |
| "Returns 0 for success, number of failed mounts for -a, or errno for one mount." |
| |
| #define mountpoint_trivial_usage \ |
| "[-q] <[-d] DIR | -x DEVICE>" |
| #define mountpoint_full_usage \ |
| "mountpoint checks if the directory is a mountpoint\n\n" \ |
| "Options:\n" \ |
| "\t-q:\t\tBe more quiet\n" \ |
| "\t-d:\t\tPrint major/minor device number of the filesystem\n" \ |
| "\t-x:\t\tPrint major/minor device number of the blockdevice" |
| #define mountpoint_example_usage \ |
| "$ mountpoint /proc\n" \ |
| "/proc is not a mountpoint\n" \ |
| "$ mountpoint /sys\n" \ |
| "/sys is a mountpoint\n" |
| |
| #define mt_trivial_usage \ |
| "[-f device] opcode value" |
| #define mt_full_usage \ |
| "Control magnetic tape drive operation\n" \ |
| "\nAvailable Opcodes:\n\n" \ |
| "bsf bsfm bsr bss datacompression drvbuffer eof eom erase\n" \ |
| "fsf fsfm fsr fss load lock mkpart nop offline ras1 ras2\n" \ |
| "ras3 reset retension rewind rewoffline seek setblk setdensity\n" \ |
| "setpart tell unload unlock weof wset" |
| |
| #define mv_trivial_usage \ |
| "[OPTION]... SOURCE DEST\n" \ |
| "or: mv [OPTION]... SOURCE... DIRECTORY" |
| #define mv_full_usage \ |
| "Rename SOURCE to DEST, or move SOURCE(s) to DIRECTORY.\n\n" \ |
| "Options:\n" \ |
| "\t-f\tdon't prompt before overwriting\n" \ |
| "\t-i\tinteractive, prompt before overwrite" |
| #define mv_example_usage \ |
| "$ mv /tmp/foo /bin/bar\n" |
| |
| #define nameif_trivial_usage \ |
| "[-s] [-c FILE] [{IFNAME MACADDR}]" |
| #define nameif_full_usage \ |
| "Nameif renaming network interface while it in the down state.\n\n" \ |
| "Options:\n" \ |
| "\t-c FILE\t\tUse configuration file (default is /etc/mactab)\n" \ |
| "\t-s\t\tUse syslog (LOCAL0 facility)\n" \ |
| "\tIFNAME MACADDR\tnew_interface_name interface_mac_address" |
| #define nameif_example_usage \ |
| "$ nameif -s dmz0 00:A0:C9:8C:F6:3F\n" \ |
| " or\n" \ |
| "$ nameif -c /etc/my_mactab_file\n" \ |
| |
| #if ENABLE_NC_SERVER || ENABLE_NC_EXTRA |
| #define NC_BR1 "[" |
| #define NC_BR2 "]" |
| #else |
| #define NC_BR1 |
| #define NC_BR2 |
| #endif |
| |
| #define nc_trivial_usage \ |
| "[" \ |
| NC_BR1 USE_NC_SERVER("-lp")USE_NC_EXTRA("iwf") NC_BR2 \ |
| " ["USE_NC_EXTRA("FILENAME|")"{IPADDR PORTNUM}]"USE_NC_EXTRA(" [-e COMMAND]") |
| #define nc_full_usage \ |
| "Netcat opens a pipe, either to IP:port\n\n" \ |
| "Options:" \ |
| USE_NC_EXTRA( \ |
| "\n\t-e\t\texec rest of command line after connect\n" \ |
| "\t-i SECS\t\tdelay interval for lines sent\n" \ |
| "\t-w SECS\t\ttimeout for connect\n" \ |
| "\t-f filename\tuse file (ala /dev/ttyS0) instead of network" \ |
| ) \ |
| USE_NC_SERVER( \ |
| "\n\t-l\t\tlisten mode, for inbound connects\n" \ |
| USE_NC_EXTRA("\t\t\t(use -l twice with -e for persistent server)\n") \ |
| "\t-p PORT\t\tlocal port number" \ |
| ) |
| |
| |
| #define nc_notes_usage "" \ |
| USE_NC_EXTRA( \ |
| "To use netcat as a terminal emulator on a serial port:\n\n" \ |
| "$ stty 115200 -F /dev/ttyS0\n" \ |
| "$ stty raw -echo -ctlecho && nc -f /dev/ttyS0\n" \ |
| ) "" |
| |
| #define nc_example_usage \ |
| "$ nc foobar.somedomain.com 25\n" \ |
| "220 foobar ESMTP Exim 3.12 #1 Sat, 15 Apr 2000 00:03:02 -0600\n" \ |
| "help\n" \ |
| "214-Commands supported:\n" \ |
| "214- HELO EHLO MAIL RCPT DATA AUTH\n" \ |
| "214 NOOP QUIT RSET HELP\n" \ |
| "quit\n" \ |
| "221 foobar closing connection\n" |
| |
| #define netstat_trivial_usage \ |
| "[-laenrtuwx]" |
| #define netstat_full_usage \ |
| "Netstat displays Linux networking information.\n\n" \ |
| "Options:\n" \ |
| "\t-l display listening server sockets\n" \ |
| "\t-a display all sockets (default: connected)\n" \ |
| "\t-e display other/more information\n" \ |
| "\t-n don't resolve names\n" \ |
| "\t-r display routing table\n" \ |
| "\t-t tcp sockets\n" \ |
| "\t-u udp sockets\n" \ |
| "\t-w raw sockets\n" \ |
| "\t-x unix sockets" |
| |
| #define nice_trivial_usage \ |
| "[-n ADJUST] [COMMAND [ARG] ...]" |
| #define nice_full_usage \ |
| "Nice runs a program with modified scheduling priority.\n\n" \ |
| "Options:\n" \ |
| "\t-n ADJUST\tAdjust the scheduling priority by ADJUST" |
| |
| #define nohup_trivial_usage \ |
| "COMMAND [ARGS]" |
| #define nohup_full_usage \ |
| "run a command immune to hangups, with output to a non-tty" |
| #define nohup_example_usage \ |
| "$ nohup make &" |
| |
| #define nslookup_trivial_usage \ |
| "[HOST] [SERVER]" |
| #define nslookup_full_usage \ |
| "Queries the nameserver for the IP address of the given HOST\n" \ |
| "optionally using a specified DNS server" |
| #define nslookup_example_usage \ |
| "$ nslookup localhost\n" \ |
| "Server: default\n" \ |
| "Address: default\n" \ |
| "\n" \ |
| "Name: debian\n" \ |
| "Address: 127.0.0.1\n" |
| |
| #define od_trivial_usage \ |
| "[-aBbcDdeFfHhIiLlOovXx] [FILE]" |
| #define od_full_usage \ |
| "Write an unambiguous representation, octal bytes by default, of FILE\n" \ |
| "to standard output. With no FILE, or when FILE is -, read standard input." |
| |
| #define openvt_trivial_usage \ |
| "<vtnum> <COMMAND> [ARGS...]" |
| #define openvt_full_usage \ |
| "Start a command on a new virtual terminal" |
| #define openvt_example_usage \ |
| "openvt 2 /bin/ash\n" |
| |
| #ifdef CONFIG_FEATURE_SHA1_PASSWORDS |
| # define PASSWORD_ALG_TYPES(a) a |
| #else |
| # define PASSWORD_ALG_TYPES(a) |
| #endif |
| #define passwd_trivial_usage \ |
| "[OPTION] [name]" |
| #define passwd_full_usage \ |
| "Change a user password. If no name is specified,\n" \ |
| "changes the password for the current user.\n" \ |
| "Options:\n" \ |
| "\t-a\tDefine which algorithm shall be used for the password\n" \ |
| "\t\t\t(Choices: des, md5" \ |
| PASSWORD_ALG_TYPES(", sha1") \ |
| ")\n\t-d\tDelete the password for the specified user account\n" \ |
| "\t-l\tLocks (disables) the specified user account\n" \ |
| "\t-u\tUnlocks (re-enables) the specified user account" |
| |
| #define patch_trivial_usage \ |
| "[-p<num>] [-i <diff>]" |
| #define patch_full_usage \ |
| "\t-p <num>\tStrip <num> leading components from file names\n" \ |
| "\t-i <diff>\tRead <diff> instead of stdin" |
| #define patch_example_usage \ |
| "$ patch -p1 < example.diff\n" \ |
| "$ patch -p0 -i example.diff" |
| |
| #if ENABLE_FEATURE_PIDOF_SINGLE |
| #define USAGE_FEATURE_PIDOF_SINGLE(a) a |
| #else |
| #define USAGE_FEATURE_PIDOF_SINGLE(a) |
| #endif |
| #if ENABLE_FEATURE_PIDOF_OMIT |
| #define USAGE_FEATURE_PIDOF_OMIT(a) a |
| #else |
| #define USAGE_FEATURE_PIDOF_OMIT(a) |
| #endif |
| #if (ENABLE_FEATURE_PIDOF_SINGLE || ENABLE_FEATURE_PIDOF_OMIT) |
| #define USAGE_PIDOF "Options:" |
| #else |
| #define USAGE_PIDOF "\n\tThis version of pidof accepts no options." |
| #endif |
| |
| #define pidof_trivial_usage \ |
| "process-name [OPTION] [process-name ...]" |
| |
| #define pidof_full_usage \ |
| "Lists the PIDs of all processes with names that match the\n" \ |
| "names on the command line.\n" \ |
| USAGE_PIDOF \ |
| USAGE_FEATURE_PIDOF_SINGLE("\n\t-s\t\tdisplay only a single PID") \ |
| USAGE_FEATURE_PIDOF_OMIT("\n\t-o\t\tomit given pid.") \ |
| USAGE_FEATURE_PIDOF_OMIT("\n\t\t\tUse %PPID to omit the parent pid of pidof itself") |
| #define pidof_example_usage \ |
| "$ pidof init\n" \ |
| "1\n" \ |
| USAGE_FEATURE_PIDOF_OMIT("$ pidof /bin/sh\n20351 5973 5950\n") \ |
| USAGE_FEATURE_PIDOF_OMIT("$ pidof /bin/sh -o %PPID\n20351 5950") |
| |
| #ifndef CONFIG_FEATURE_FANCY_PING |
| #define ping_trivial_usage "host" |
| #define ping_full_usage "Send ICMP ECHO_REQUEST packets to network hosts" |
| #else |
| #define ping_trivial_usage \ |
| "[OPTION]... host" |
| #define ping_full_usage \ |
| "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \ |
| "Options:\n" \ |
| "\t-c COUNT\tSend only COUNT pings\n" \ |
| "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56)\n" \ |
| "\t-q\t\tQuiet mode, only displays output at start\n" \ |
| "\t\t\tand when finished" |
| #endif |
| #define ping_example_usage \ |
| "$ ping localhost\n" \ |
| "PING slag (127.0.0.1): 56 data bytes\n" \ |
| "64 bytes from 127.0.0.1: icmp_seq=0 ttl=255 time=20.1 ms\n" \ |
| "\n" \ |
| "--- debian ping statistics ---\n" \ |
| "1 packets transmitted, 1 packets received, 0% packet loss\n" \ |
| "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" |
| |
| #ifndef CONFIG_FEATURE_FANCY_PING6 |
| #define ping6_trivial_usage "host" |
| #define ping6_full_usage "Send ICMP ECHO_REQUEST packets to network hosts" |
| #else |
| #define ping6_trivial_usage \ |
| "[OPTION]... host" |
| #define ping6_full_usage \ |
| "Send ICMP ECHO_REQUEST packets to network hosts.\n\n" \ |
| "Options:\n" \ |
| "\t-c COUNT\tSend only COUNT pings\n" \ |
| "\t-s SIZE\t\tSend SIZE data bytes in packets (default=56)\n" \ |
| "\t-q\t\tQuiet mode, only displays output at start\n" \ |
| "\t\t\tand when finished" |
| #endif |
| #define ping6_example_usage \ |
| "$ ping6 ip6-localhost\n" \ |
| "PING ip6-localhost (::1): 56 data bytes\n" \ |
| "64 bytes from ::1: icmp6_seq=0 ttl=64 time=20.1 ms\n" \ |
| "\n" \ |
| "--- ip6-localhost ping statistics ---\n" \ |
| "1 packets transmitted, 1 packets received, 0% packet loss\n" \ |
| "round-trip min/avg/max = 20.1/20.1/20.1 ms\n" |
| |
| #define pivot_root_trivial_usage \ |
| "NEW_ROOT PUT_OLD" |
| #define pivot_root_full_usage \ |
| "Move the current root file system to PUT_OLD and make NEW_ROOT\n" \ |
| "the new root file system." |
| |
| #define poweroff_trivial_usage \ |
| "[-d<delay>] [-n<nosync>] [-f<force>]" |
| #define poweroff_full_usage \ |
| "Halt and shut off power.\n" \ |
| "Options:\n" \ |
| "\t-d\t\tdelay interval for halting\n" \ |
| "\t-n\t\tno call to sync()\n" \ |
| "\t-f\t\tforce power off (don't go through init)" |
| |
| #define printenv_trivial_usage \ |
| "[VARIABLES...]" |
| #define printenv_full_usage \ |
| "print all or part of environment\n\n" \ |
| "If no environment VARIABLE specified, print them all." |
| |
| #define printf_trivial_usage \ |
| "FORMAT [ARGUMENT...]" |
| #define printf_full_usage \ |
| "Formats and prints ARGUMENT(s) according to FORMAT,\n" \ |
| "Where FORMAT controls the output exactly as in C printf." |
| #define printf_example_usage \ |
| "$ printf \"Val=%d\\n\" 5\n" \ |
| "Val=5\n" |
| |
| #if !defined CONFIG_SELINUX && !ENABLE_FEATURE_PS_WIDE |
| #define USAGE_PS "\n\tThis version of ps accepts no options." |
| #else |
| #define USAGE_PS "\nOptions:" |
| #endif |
| #if ENABLE_FEATURE_PS_WIDE |
| #define USAGE_PS_WIDE(a) a |
| #else |
| #define USAGE_PS_WIDE(a) |
| #endif |
| |
| #define ps_trivial_usage \ |
| "" |
| #define ps_full_usage \ |
| "Report process status\n" \ |
| USAGE_PS \ |
| USAGE_SELINUX("\n\t-c\tshow SE Linux context") \ |
| USAGE_PS_WIDE("\n\tw\twide output") |
| |
| #define ps_example_usage \ |
| "$ ps\n" \ |
| " PID Uid Gid State Command\n" \ |
| " 1 root root S init\n" \ |
| " 2 root root S [kflushd]\n" \ |
| " 3 root root S [kupdate]\n" \ |
| " 4 root root S [kpiod]\n" \ |
| " 5 root root S [kswapd]\n" \ |
| " 742 andersen andersen S [bash]\n" \ |
| " 743 andersen andersen S -bash\n" \ |
| " 745 root root S [getty]\n" \ |
| " 2990 andersen andersen R ps\n" |
| |
| #define pwd_trivial_usage \ |
| "" |
| #define pwd_full_usage \ |
| "Print the full filename of the current working directory." |
| #define pwd_example_usage \ |
| "$ pwd\n" \ |
| "/root\n" |
| |
| #define rdate_trivial_usage \ |
| "[-sp] HOST" |
| #define rdate_full_usage \ |
| "Get and possibly set the system date and time from a remote HOST.\n\n" \ |
| "Options:\n" \ |
| "\t-s\tSet the system date and time (default)\n" \ |
| "\t-p\tPrint the date and time" |
| |
| #ifdef CONFIG_FEATURE_READLINK_FOLLOW |
| #define USAGE_READLINK_FOLLOW(a) a |
| #else |
| #define USAGE_READLINK_FOLLOW(a) |
| #endif |
| |
| #define readlink_trivial_usage \ |
| USAGE_READLINK_FOLLOW("[-f] ") "FILE" |
| #define readlink_full_usage \ |
| "Displays the value of a symbolic link." \ |
| USAGE_READLINK_FOLLOW("\n\nOptions:\n" \ |
| "\t-f\tcanonicalize by following all symlinks") |
| |
| #define readprofile_trivial_usage \ |
| "[OPTIONS]..." |
| #define readprofile_full_usage \ |
| "Options:\n" \ |
| "\t -m <mapfile> (default: /boot/System.map)\n" \ |
| "\t -p <profile> (default: /proc/profile)\n" \ |
| "\t -M <mult> set the profiling multiplier to <mult>\n" \ |
| "\t -i print only info about the sampling step\n" \ |
| "\t -v print verbose data\n" \ |
| "\t -a print all symbols, even if count is 0\n" \ |
| "\t -b print individual histogram-bin counts\n" \ |
| "\t -s print individual counters within functions\n" \ |
| "\t -r reset all the counters (root only)\n" \ |
| "\t -n disable byte order auto-detection" |
| |
| #define realpath_trivial_usage \ |
| "pathname ..." |
| #define realpath_full_usage \ |
| "Returns the absolute pathnames of given argument." |
| |
| #define reboot_trivial_usage \ |
| "[-d<delay>] [-n<nosync>] [-f<force>]" |
| #define reboot_full_usage \ |
| "Reboot the system.\n" \ |
| "Options:\n" \ |
| "\t-d\t\tdelay interval for rebooting\n" \ |
| "\t-n\t\tno call to sync()\n" \ |
| "\t-f\t\tforce reboot (don't go through init)" |
| |
| #define renice_trivial_usage \ |
| "{{-n INCREMENT} | PRIORITY} [[ -p | -g | -u ] ID ...]" |
| #define renice_full_usage \ |
| "Changes priority of running processes.\n\n" \ |
| "Options:\n" \ |
| "\t-n\tadjusts current nice value (smaller is faster)\n" \ |
| "\t-p\tprocess id(s) (default)\n" \ |
| "\t-g\tprocess group id(s)\n" \ |
| "\t-u\tprocess user name(s) and/or id(s)" |
| |
| #define reset_trivial_usage \ |
| "" |
| #define reset_full_usage \ |
| "Resets the screen." |
| |
| #define rm_trivial_usage \ |
| "[OPTION]... FILE..." |
| #define rm_full_usage \ |
| "Remove (unlink) the FILE(s). You may use '--' to\n" \ |
| "indicate that all following arguments are non-options.\n\n" \ |
| "Options:\n" \ |
| "\t-i\t\talways prompt before removing each destination\n" \ |
| "\t-f\t\tremove existing destinations, never prompt\n" \ |
| "\t-r or -R\tremove the contents of directories recursively" |
| #define rm_example_usage \ |
| "$ rm -rf /tmp/foo\n" |
| |
| #define rmdir_trivial_usage \ |
| "[OPTION]... DIRECTORY..." |
| #define rmdir_full_usage \ |
| "Remove the DIRECTORY(ies), if they are empty." |
| #define rmdir_example_usage \ |
| "# rmdir /tmp/foo\n" |
| |
| #define rmmod_trivial_usage \ |
| "[OPTION]... [MODULE]..." |
| #define rmmod_full_usage \ |
| "Unloads the specified kernel modules from the kernel.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tRemove all unused modules (recursively)" |
| #define rmmod_example_usage \ |
| "$ rmmod tulip\n" |
| |
| #ifdef CONFIG_FEATURE_IPV6 |
| # define USAGE_ROUTE_IPV6(a) a |
| #else |
| # define USAGE_ROUTE_IPV6(a) "\t" |
| #endif |
| |
| |
| #define route_trivial_usage \ |
| "[{add|del|delete}]" |
| #define route_full_usage \ |
| "Edit the kernel's routing tables.\n\n" \ |
| "Options:\n" \ |
| "\t-n\t\tDont resolve names\n" \ |
| "\t-e\t\tDisplay other/more information\n" \ |
| "\t-A inet" USAGE_ROUTE_IPV6("{6}") "\tSelect address family" |
| |
| #define rpm_trivial_usage \ |
| "-i -q[ildc]p package.rpm" |
| #define rpm_full_usage \ |
| "Manipulates RPM packages" \ |
| "\n\nOptions:" \ |
| "\n\t-i Install package" \ |
| "\n\t-q Query package" \ |
| "\n\t-p Query uninstalled package" \ |
| "\n\t-i Show information" \ |
| "\n\t-l List contents" \ |
| "\n\t-d List documents" \ |
| "\n\t-c List config files" |
| |
| #define rpm2cpio_trivial_usage \ |
| "package.rpm" |
| #define rpm2cpio_full_usage \ |
| "Outputs a cpio archive of the rpm file." |
| |
| #define run_parts_trivial_usage \ |
| "[-t] [-a ARG] [-u MASK] DIRECTORY" |
| #define run_parts_full_usage \ |
| "Run a bunch of scripts in a directory.\n\n" \ |
| "Options:\n" \ |
| "\t-t\tPrints what would be run, but does not actually run anything\n" \ |
| "\t-a ARG\tPass ARG as an argument for every program invoked\n" \ |
| "\t-u MASK\tSet the umask to MASK before executing every program" |
| |
| #define runlevel_trivial_usage \ |
| "[utmp]" |
| #define runlevel_full_usage \ |
| "Find the current and previous system runlevel.\n\n" \ |
| "If no utmp file exists or if no runlevel record can be found,\n" \ |
| "runlevel prints \"unknown\"" |
| #define runlevel_example_usage \ |
| "$ runlevel /var/run/utmp\n" \ |
| "N 2" |
| |
| #define rx_trivial_usage \ |
| "FILE" |
| #define rx_full_usage \ |
| "Receive a file using the xmodem protocol." |
| #define rx_example_usage \ |
| "$ rx /tmp/foo\n" |
| |
| #define sed_trivial_usage \ |
| "[-efinr] pattern [files...]" |
| #define sed_full_usage \ |
| "Options:\n" \ |
| "\t-e script\tadd the script to the commands to be executed\n" \ |
| "\t-f scriptfile\tadd script-file contents to the\n" \ |
| "\t\t\tcommands to be executed\n" \ |
| "\t-i\t\tedit files in-place\n" \ |
| "\t-n\t\tsuppress automatic printing of pattern space\n" \ |
| "\t-r\t\tuse extended regular expression syntax\n" \ |
| "\n" \ |
| "If no -e or -f is given, the first non-option argument is taken as the sed\n" \ |
| "script to interpret. All remaining arguments are names of input files; if no\n" \ |
| "input files are specified, then the standard input is read. Source files\n" \ |
| "will not be modified unless -i option is given." |
| |
| #define sed_example_usage \ |
| "$ echo \"foo\" | sed -e 's/f[a-zA-Z]o/bar/g'\n" \ |
| "bar\n" |
| |
| #define seq_trivial_usage \ |
| "[first [increment]] last" |
| #define seq_full_usage \ |
| "Print numbers from FIRST to LAST, in steps of INCREMENT.\n" \ |
| "FIRST, INCREMENT default to 1\n" \ |
| "Arguments:\n" \ |
| "\tLAST\n" \ |
| "\tFIRST\tLAST\n" \ |
| "\tFIRST\tINCREMENT\tLAST" |
| |
| #define setconsole_trivial_usage \ |
| "[-r|--reset] [DEVICE]" |
| #define setconsole_full_usage \ |
| "Redirects system console output to DEVICE (default: /dev/tty).\n\n" \ |
| "Options:\n" \ |
| "\t-r\tReset output to /dev/console." |
| |
| #define setkeycodes_trivial_usage \ |
| "SCANCODE KEYCODE ..." |
| #define setkeycodes_full_usage \ |
| "Set entries into the kernel's scancode-to-keycode map,\n" \ |
| "allowing unusual keyboards to generate usable keycodes.\n\n" \ |
| "SCANCODE may be either xx or e0xx (hexadecimal),\n" \ |
| "and KEYCODE is given in decimal" |
| #define setkeycodes_example_usage \ |
| "$ setkeycodes e030 127\n" |
| |
| #define setlogcons_trivial_usage \ |
| "N" |
| #define setlogcons_full_usage \ |
| "Redirects the kernel output to console N (0 for current)." |
| |
| #define setsid_trivial_usage \ |
| "program [arg ...]" |
| #define setsid_full_usage \ |
| "Runs any program in a new session by calling setsid() before\n" \ |
| "exec'ing the rest of its arguments. See setsid(2) for details." |
| |
| #define lash_trivial_usage \ |
| "[FILE]...\n" \ |
| "or: sh -c command [args]..." |
| #define lash_full_usage \ |
| "The BusyBox LAme SHell (command interpreter)" |
| #define lash_notes_usage \ |
| "This command does not yet have proper documentation.\n\n" \ |
| "Use lash just as you would use any other shell. It properly handles pipes,\n" \ |
| "redirects, job control, can be used as the shell for scripts, and has a\n" \ |
| "sufficient set of builtins to do what is needed. It does not (yet) support\n" \ |
| "Bourne Shell syntax. If you need things like \"if-then-else\", \"while\", and such\n" \ |
| "use ash or bash. If you just need a very simple and extremely small shell,\n" \ |
| "this will do the job." |
| |
| #define last_trivial_usage \ |
| "" |
| #define last_full_usage \ |
| "Shows listing of the last users that logged into the system" |
| |
| #define sha1sum_trivial_usage \ |
| "[OPTION] [FILEs...]" \ |
| USAGE_MD5_SHA1_SUM_CHECK("\n or: sha1sum [OPTION] -c [FILE]") |
| #define sha1sum_full_usage \ |
| "Print" USAGE_MD5_SHA1_SUM_CHECK(" or check") " SHA1 checksums.\n\n" \ |
| "Options:\n" \ |
| "With no FILE, or when FILE is -, read standard input." \ |
| USAGE_MD5_SHA1_SUM_CHECK("\n\n" \ |
| "\t-c\tcheck SHA1 sums against given list\n" \ |
| "\nThe following two options are useful only when verifying checksums:\n" \ |
| "\t-s\tdon't output anything, status code shows success\n" \ |
| "\t-w\twarn about improperly formated SHA1 checksum lines") |
| |
| #ifdef CONFIG_FEATURE_FANCY_SLEEP |
| # define USAGE_FANCY_SLEEP(a) a |
| # define USAGE_NOT_FANCY_SLEEP(a) |
| #else |
| # define USAGE_FANCY_SLEEP(a) |
| # define USAGE_NOT_FANCY_SLEEP(a) a |
| #endif |
| |
| #define sleep_trivial_usage \ |
| USAGE_FANCY_SLEEP("[") "N" USAGE_FANCY_SLEEP("]...") |
| #define sleep_full_usage \ |
| USAGE_NOT_FANCY_SLEEP("Pause for N seconds.") \ |
| USAGE_FANCY_SLEEP( \ |
| "Pause for a time equal to the total of the args given, where each arg can\n" \ |
| "\t\thave an optional suffix of (s)econds, (m)inutes, (h)ours, or (d)ays.") |
| #define sleep_example_usage \ |
| "$ sleep 2\n" \ |
| "[2 second delay results]\n" \ |
| USAGE_FANCY_SLEEP("$ sleep 1d 3h 22m 8s\n" \ |
| "[98528 second delay results]\n") |
| |
| #if ENABLE_FEATURE_SORT_BIG |
| # define USAGE_SORT_BIG(a) a |
| #else |
| # define USAGE_SORT_BIG(a) |
| #endif |
| |
| #define sort_trivial_usage \ |
| "[-nru" USAGE_SORT_BIG("gMcszbdfimSTokt] [-o outfile] [-k start[.offset][opts][,end[.offset][opts]] [-t char") "] [FILE]..." |
| #define sort_full_usage \ |
| "Sorts lines of text in the specified files\n\n" \ |
| "Options:\n" \ |
| USAGE_SORT_BIG( \ |
| "\t-b\tignore leading blanks\n" \ |
| "\t-c\tcheck whether input is sorted\n" \ |
| "\t-d\tdictionary order (blank or alphanumeric only)\n" \ |
| "\t-f\tignore case\n" \ |
| "\t-g\tgeneral numerical sort\n" \ |
| "\t-i\tignore unprintable characters\n" \ |
| "\t-k\tspecify sort key\n" \ |
| "\t-M\tsort month\n" \ |
| ) \ |
| "\t-n\tsort numbers\n" \ |
| USAGE_SORT_BIG( \ |
| "\t-o\toutput to file\n" \ |
| "\t-k\tsort by key\n" \ |
| "\t-t\tuse key separator other than whitespace\n" \ |
| ) \ |
| "\t-r\treverse sort order\n" \ |
| USAGE_SORT_BIG("\t-s\tstable (don't sort ties alphabetically)\n") \ |
| "\t-u\tsuppress duplicate lines" \ |
| USAGE_SORT_BIG("\n\t-z\tinput terminated by nulls, not newlines\n") \ |
| USAGE_SORT_BIG("\t-mST\tignored for GNU compatibility") \ |
| "" |
| #define sort_example_usage \ |
| "$ echo -e \"e\\nf\\nb\\nd\\nc\\na\" | sort\n" \ |
| "a\n" \ |
| "b\n" \ |
| "c\n" \ |
| "d\n" \ |
| "e\n" \ |
| "f\n" \ |
| USAGE_SORT_BIG( \ |
| "$ echo -e \"c 3\\nb 2\\nd 2\" | $SORT -k 2,2n -k 1,1r\n" \ |
| "d 2\n" \ |
| "b 2\n" \ |
| "c 3\n" \ |
| ) \ |
| "" |
| |
| #define start_stop_daemon_trivial_usage \ |
| "[OPTIONS] [--start|--stop] ... [-- arguments...]" |
| #define start_stop_daemon_full_usage \ |
| "Program to start and stop services." \ |
| "\n\nOptions:" \ |
| "\n\t-S|--start\t\t\tstart" \ |
| "\n\t-K|--stop\t\t\tstop" \ |
| "\n\t-a|--startas <pathname>\t\tstarts process specified by pathname" \ |
| "\n\t-b|--background\t\t\tforce process into background" \ |
| "\n\t-u|--user <username>|<uid>\tstop this user's processes" \ |
| "\n\t-x|--exec <executable>\t\tprogram to either start or check" \ |
| "\n\t-m|--make-pidfile <filename>\tcreate the -p file and enter pid in it" \ |
| "\n\t-n|--name <process-name>\tstop processes with this name" \ |
| "\n\t-p|--pidfile <pid-file>\t\tsave or load pid using a pid-file" \ |
| "\n\t-q|--quiet\t\t\tbe quiet" \ |
| USE_FEATURE_START_STOP_DAEMON_FANCY( \ |
| "\n\t-o|--oknodo\t\t\texit status 0 if nothing done" \ |
| "\n\t-v|--verbose\t\t\tbe verbose" \ |
| ) \ |
| "\n\t-s|--signal <signal>\t\tsignal to send (default TERM)" |
| |
| #ifdef CONFIG_FEATURE_STAT_FORMAT |
| # define USAGE_STAT_FORMAT(a) a |
| #else |
| # define USAGE_STAT_FORMAT(a) |
| #endif |
| #define stat_trivial_usage \ |
| "[OPTION] FILE..." |
| #define stat_full_usage \ |
| "display file (default) or filesystem status.\n\n" \ |
| "Options:\n" \ |
| USAGE_STAT_FORMAT("\t-c fmt\tuse the specified format\n") \ |
| "\t-f\tdisplay filesystem status\n" \ |
| "\t-L,-l\tdereference links\n" \ |
| "\t-t\tdisplay info in terse form\n" \ |
| USAGE_STAT_FORMAT( \ |
| "\nValid format sequences for files:\n" \ |
| " %a Access rights in octal\n" \ |
| " %A Access rights in human readable form\n" \ |
| " %b Number of blocks allocated (see %B)\n" \ |
| " %B The size in bytes of each block reported by %b\n" \ |
| " %d Device number in decimal\n" \ |
| " %D Device number in hex\n" \ |
| " %f Raw mode in hex\n" \ |
| " %F File type\n" \ |
| " %g Group ID of owner\n" \ |
| " %G Group name of owner\n" \ |
| " %h Number of hard links\n" \ |
| " %i Inode number\n" \ |
| " %n File name\n" \ |
| " %N Quoted file name with dereference if symbolic link\n" \ |
| " %o I/O block size\n" \ |
| " %s Total size, in bytes\n" \ |
| " %t Major device type in hex\n" \ |
| " %T Minor device type in hex\n" \ |
| " %u User ID of owner\n" \ |
| " %U User name of owner\n" \ |
| " %x Time of last access\n" \ |
| " %X Time of last access as seconds since Epoch\n" \ |
| " %y Time of last modification\n" \ |
| " %Y Time of last modification as seconds since Epoch\n" \ |
| " %z Time of last change\n" \ |
| " %Z Time of last change as seconds since Epoch\n" \ |
| "\nValid format sequences for file systems:\n" \ |
| " %a Free blocks available to non-superuser\n" \ |
| " %b Total data blocks in file system\n" \ |
| " %c Total file nodes in file system\n" \ |
| " %d Free file nodes in file system\n" \ |
| " %f Free blocks in file system\n" \ |
| " %i File System ID in hex\n" \ |
| " %l Maximum length of filenames\n" \ |
| " %n File name\n" \ |
| " %s Block size (for faster transfers)\n" \ |
| " %S Fundamental block size (for block counts)\n" \ |
| " %t Type in hex\n" \ |
| " %T Type in human readable form\n" \ |
| ) |
| |
| #define strings_trivial_usage \ |
| "[-afo] [-n length] [file ... ]" |
| #define strings_full_usage \ |
| "Display printable strings in a binary file." \ |
| "\n\nOptions:" \ |
| "\n\t-a\tScan the whole files (this is the default)." \ |
| "\n\t-f\tPrecede each string with the name of the file where it was found." \ |
| "\n\t-n N\tSpecifies that at least N characters forms a sequence (default 4)" \ |
| "\n\t-o\tEach string is preceded by its decimal offset in the file" |
| |
| #define stty_trivial_usage \ |
| "[-a|g] [-F DEVICE] [SETTING]..." |
| #define stty_full_usage \ |
| "Without arguments, prints baud rate, line discipline," \ |
| "\nand deviations from stty sane." \ |
| "\n\nOptions:" \ |
| "\n\t-F DEVICE\topen device instead of stdin" \ |
| "\n\t-a\t\tprint all current settings in human-readable form" \ |
| "\n\t-g\t\tprint in stty-readable form" \ |
| "\n\t[SETTING]\tsee manpage" |
| |
| #define su_trivial_usage \ |
| "[OPTION]... [-] [username]" |
| #define su_full_usage \ |
| "Change user id or become root.\n" \ |
| "Options:\n" \ |
| "\t-p, -m\tPreserve environment" \ |
| "\n\t-c\tCommand to pass to 'sh -c'" \ |
| "\n\t-s\tShell to use instead of default shell" |
| |
| #define sulogin_trivial_usage \ |
| "[OPTION]... [tty-device]" |
| #define sulogin_full_usage \ |
| "Single user login\n" \ |
| "Options:\n" \ |
| "\t-f\tDo not authenticate (user already authenticated)\n" \ |
| "\t-h\tName of the remote host for this login\n" \ |
| "\t-p\tPreserve environment" |
| |
| #define sum_trivial_usage \ |
| "[rs] [files...]" |
| #define sum_full_usage \ |
| "checksum and count the blocks in a file\n\n" \ |
| "Options:\n" \ |
| "\t-r\tuse BSD sum algorithm (1K blocks)\n" \ |
| "\t-s\tuse System V sum algorithm (512byte blocks)" |
| |
| #define swapoff_trivial_usage \ |
| "[-a] [DEVICE]" |
| #define swapoff_full_usage \ |
| "Stop swapping virtual memory pages on DEVICE.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tStop swapping on all swap devices" |
| |
| #define swapon_trivial_usage \ |
| "[-a] [DEVICE]" |
| #define swapon_full_usage \ |
| "Start swapping virtual memory pages on DEVICE.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tStart swapping on all swap devices" |
| |
| #define switch_root_trivial_usage \ |
| "[-c /dev/console] NEW_ROOT NEW_INIT [ARGUMENTS_TO_INIT]" |
| #define switch_root_full_usage \ |
| "Use from PID 1 under initramfs to free initramfs, chroot to NEW_ROOT,\n" \ |
| "and exec NEW_INIT.\n\n" \ |
| "Options:\n" \ |
| "\t-c\tRedirect console to device on new root" |
| |
| #define sync_trivial_usage \ |
| "" |
| #define sync_full_usage \ |
| "Write all buffered filesystem blocks to disk." |
| |
| |
| #ifdef CONFIG_FEATURE_ROTATE_LOGFILE |
| # define USAGE_ROTATE_LOGFILE(a) a |
| #else |
| # define USAGE_ROTATE_LOGFILE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_REMOTE_LOG |
| # define USAGE_REMOTE_LOG(a) a |
| #else |
| # define USAGE_REMOTE_LOG(a) |
| #endif |
| #ifdef CONFIG_FEATURE_IPC_SYSLOG |
| # define USAGE_IPC_LOG(a) a |
| #else |
| # define USAGE_IPC_LOG(a) |
| #endif |
| |
| #define sysctl_trivial_usage \ |
| "[OPTIONS]... [VALUE]..." |
| #define sysctl_full_usage \ |
| "configure kernel parameters at runtime\n\n" \ |
| "Options:\n" \ |
| "\t-n\tUse this option to disable printing of the key name when printing values\n" \ |
| "\t-w\tUse this option when you want to change a sysctl setting\n" \ |
| "\t-p\tLoad in sysctl settings from the file specified or /etc/sysctl.conf if none given\n" \ |
| "\t-a\tDisplay all values currently available\n" \ |
| "\t-A\tDisplay all values currently available in table form" |
| #define sysctl_example_usage \ |
| "sysctl [-n] variable ...\n" \ |
| "sysctl [-n] -w variable=value ...\n" \ |
| "sysctl [-n] -a\n" \ |
| "sysctl [-n] -p <file>\t(default /etc/sysctl.conf)\n" \ |
| "sysctl [-n] -A\n" |
| |
| #define syslogd_trivial_usage \ |
| "[OPTION]..." |
| #define syslogd_full_usage \ |
| "Linux system and kernel logging utility.\n" \ |
| "Note that this version of syslogd ignores /etc/syslog.conf.\n\n" \ |
| "Options:\n" \ |
| "\t-m MIN\t\tMinutes between MARK lines (default=20, 0=off)\n" \ |
| "\t-n\t\tRun as a foreground process\n" \ |
| "\t-O FILE\t\tUse an alternate log file (default=/var/log/messages)\n" \ |
| "\t-S\t\tMake logging output smaller." \ |
| USAGE_ROTATE_LOGFILE( \ |
| "\n\t-s SIZE\t\tMax size (KB) before rotate (default=200KB, 0=off)\n" \ |
| "\t-b NUM\t\tNumber of rotated logs to keep (default=1, max=99, 0=purge)") \ |
| USAGE_REMOTE_LOG( \ |
| "\n\t-R HOST[:PORT]\tLog to IP or hostname on PORT (default PORT=514/UDP)\n" \ |
| "\t-L\t\tLog locally and via network logging (default is network only)") \ |
| USAGE_IPC_LOG( \ |
| "\n\t-C [size(KiB)]\tLog to a circular buffer (read the buffer using logread)") |
| #define syslogd_example_usage \ |
| "$ syslogd -R masterlog:514\n" \ |
| "$ syslogd -R 192.168.1.1:601\n" |
| |
| |
| #ifndef CONFIG_FEATURE_FANCY_TAIL |
| # define USAGE_UNSIMPLE_TAIL(a) |
| #else |
| # define USAGE_UNSIMPLE_TAIL(a) a |
| #endif |
| #define tail_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define tail_full_usage \ |
| "Print last 10 lines of each FILE to standard output.\n" \ |
| "With more than one FILE, precede each with a header giving the\n" \ |
| "file name. With no FILE, or when FILE is -, read standard input.\n\n" \ |
| "Options:\n" \ |
| USAGE_UNSIMPLE_TAIL("\t-c N[kbm]\toutput the last N bytes\n") \ |
| "\t-n N[kbm]\tprint last N lines instead of last 10\n" \ |
| "\t-f\t\toutput data as the file grows" \ |
| USAGE_UNSIMPLE_TAIL( "\n\t-q\t\tnever output headers giving file names\n" \ |
| "\t-s SEC\t\twait SEC seconds between reads with -f\n" \ |
| "\t-v\t\talways output headers giving file names\n\n" \ |
| "If the first character of N (bytes or lines) is a '+', output begins with \n" \ |
| "the Nth item from the start of each file, otherwise, print the last N items\n" \ |
| "in the file. N bytes may be suffixed by k (x1024), b (x512), or m (1024^2)." ) |
| #define tail_example_usage \ |
| "$ tail -n 1 /etc/resolv.conf\n" \ |
| "nameserver 10.0.0.1\n" |
| |
| #ifdef CONFIG_FEATURE_TAR_CREATE |
| # define USAGE_TAR_CREATE(a) a |
| #else |
| # define USAGE_TAR_CREATE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TAR_EXCLUDE |
| # define USAGE_TAR_EXCLUDE(a) a |
| #else |
| # define USAGE_TAR_EXCLUDE(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TAR_GZIP |
| # define USAGE_TAR_GZIP(a) a |
| #else |
| # define USAGE_TAR_GZIP(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TAR_BZIP2 |
| # define USAGE_TAR_BZIP2(a) a |
| #else |
| # define USAGE_TAR_BZIP2(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TAR_LZMA |
| # define USAGE_TAR_LZMA(a) a |
| #else |
| # define USAGE_TAR_LZMA(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TAR_COMPRESS |
| # define USAGE_TAR_COMPRESS(a) a |
| #else |
| # define USAGE_TAR_COMPRESS(a) |
| #endif |
| |
| #define tar_trivial_usage \ |
| "-[" USAGE_TAR_CREATE("c") USAGE_TAR_GZIP("z") USAGE_TAR_BZIP2("j") USAGE_TAR_LZMA("a") USAGE_TAR_COMPRESS("Z") "xtvO] " \ |
| USAGE_TAR_EXCLUDE("[-X FILE]") \ |
| "[-f TARFILE] [-C DIR] [FILE(s)] ..." |
| #define tar_full_usage \ |
| "Create, extract, or list files from a tar file.\n\n" \ |
| "Options:\n" \ |
| USAGE_TAR_CREATE("\tc\t\tcreate\n") \ |
| "\tx\t\textract\n" \ |
| "\tt\t\tlist\n" \ |
| "\nArchive format selection:\n" \ |
| USAGE_TAR_GZIP("\tz\t\tFilter the archive through gzip\n") \ |
| USAGE_TAR_BZIP2("\tj\t\tFilter the archive through bzip2\n") \ |
| USAGE_TAR_LZMA("\ta\t\tFilter the archive through lzma\n") \ |
| USAGE_TAR_COMPRESS("\tZ\t\tFilter the archive through compress\n") \ |
| "\nFile selection:\n" \ |
| "\tf\t\tname of TARFILE or \"-\" for stdin\n" \ |
| "\tO\t\textract to stdout\n" \ |
| USAGE_TAR_EXCLUDE( \ |
| "\texclude\t\tfile to exclude\n" \ |
| "\tX\t\tfile with names to exclude\n" \ |
| ) \ |
| "\tC\t\tchange to directory DIR before operation\n" \ |
| "\tv\t\tverbosely list files processed" |
| #define tar_example_usage \ |
| "$ zcat /tmp/tarball.tar.gz | tar -xf -\n" \ |
| "$ tar -cf /tmp/tarball.tar /usr/local\n" |
| |
| #define tee_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define tee_full_usage \ |
| "Copy standard input to each FILE, and also to standard output.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tappend to the given FILEs, do not overwrite\n" \ |
| "\t-i\tignore interrupt signals (SIGINT)" |
| #define tee_example_usage \ |
| "$ echo \"Hello\" | tee /tmp/foo\n" \ |
| "$ cat /tmp/foo\n" \ |
| "Hello\n" |
| |
| #ifdef CONFIG_FEATURE_TELNET_AUTOLOGIN |
| #define telnet_trivial_usage \ |
| "[-a] [-l USER] HOST [PORT]" |
| #define telnet_full_usage \ |
| "Telnet is used to establish interactive communication with another\n" \ |
| "computer over a network using the TELNET protocol.\n\n" \ |
| "Options:\n" \ |
| "\t-a\t\tAttempt an automatic login with the USER variable\n" \ |
| "\t-l USER\t\tAttempt an automatic login with the USER argument\n" \ |
| "\tHOST\t\tThe official name, alias or the IP address of the\n" \ |
| "\t\t\tremote host.\n" \ |
| "\tPORT\t\tThe remote port number to connect to. If it is not\n" \ |
| "\t\t\tspecified, the default telnet (23) port is used." |
| #else |
| #define telnet_trivial_usage \ |
| "HOST [PORT]" |
| #define telnet_full_usage \ |
| "Telnet is used to establish interactive communication with another\n" \ |
| "computer over a network using the TELNET protocol." |
| #endif |
| |
| #ifdef CONFIG_FEATURE_TELNETD_INETD |
| #define telnetd_trivial_usage \ |
| "(inetd mode) [OPTION]" |
| #define telnetd_full_usage \ |
| "Telnetd uses incoming TELNET connections via inetd.\n" \ |
| "Options:\n" \ |
| "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \ |
| "\t-f issue_file\tDisplay issue_file instead of /etc/issue" |
| #else |
| #define telnetd_trivial_usage \ |
| "[OPTION]" |
| #define telnetd_full_usage \ |
| "Telnetd listens for incoming TELNET connections on PORT.\n" \ |
| "Options:\n" \ |
| "\t-p PORT\tlisten for connections on PORT (default 23)\n" \ |
| "\t-l LOGIN\texec LOGIN on connect (default /bin/sh)\n" \ |
| "\t-f issue_file\tDisplay issue_file instead of /etc/issue" |
| #endif |
| |
| #define test_trivial_usage \ |
| "EXPRESSION\n or [ EXPRESSION ]" |
| #define test_full_usage \ |
| "Checks file types and compares values returning an exit\n" \ |
| "code determined by the value of EXPRESSION." |
| #define test_example_usage \ |
| "$ test 1 -eq 2\n" \ |
| "$ echo $?\n" \ |
| "1\n" \ |
| "$ test 1 -eq 1\n" \ |
| "$ echo $?\n" \ |
| "0\n" \ |
| "$ [ -d /etc ]\n" \ |
| "$ echo $?\n" \ |
| "0\n" \ |
| "$ [ -d /junk ]\n" \ |
| "$ echo $?\n" \ |
| "1\n" |
| |
| #ifdef CONFIG_FEATURE_TFTP_GET |
| # define USAGE_TFTP_GET(a) a |
| #else |
| # define USAGE_TFTP_GET(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TFTP_PUT |
| # define USAGE_TFTP_PUT(a) a |
| #else |
| # define USAGE_TFTP_PUT(a) |
| #endif |
| #ifdef CONFIG_FEATURE_TFTP_BLOCKSIZE |
| # define USAGE_TFTP_BS(a) a |
| #else |
| # define USAGE_TFTP_BS(a) |
| #endif |
| |
| #define tftp_trivial_usage \ |
| "[OPTION]... HOST [PORT]" |
| #define tftp_full_usage \ |
| "Transfers a file from/to a tftp server using \"octet\" mode.\n\n" \ |
| "Options:\n" \ |
| "\t-l FILE\tLocal FILE\n" \ |
| "\t-r FILE\tRemote FILE" \ |
| USAGE_TFTP_GET( \ |
| "\n\t-g\tGet file" \ |
| ) \ |
| USAGE_TFTP_PUT( \ |
| "\n\t-p\tPut file" \ |
| ) \ |
| USAGE_TFTP_BS( \ |
| "\n\t-b SIZE\tTransfer blocks of SIZE octets" \ |
| ) |
| #define time_trivial_usage \ |
| "[OPTION]... COMMAND [ARGS...]" |
| #define time_full_usage \ |
| "Runs the program COMMAND with arguments ARGS. When COMMAND finishes,\n" \ |
| "COMMAND's resource usage information is displayed\n\n" \ |
| "Options:\n" \ |
| "\t-v\tDisplays verbose resource usage information" |
| |
| #define top_trivial_usage \ |
| "[-d <seconds>]" |
| #define top_full_usage \ |
| "top provides an view of processor activity in real time.\n" \ |
| "This utility reads the status for all processes in /proc each <seconds>\n" \ |
| "and shows the status for however many processes will fit on the screen.\n" \ |
| "This utility will not show processes that are started after program startup,\n" \ |
| "but it will show the EXIT status for and PIDs that exit while it is running." |
| |
| #define touch_trivial_usage \ |
| "[-c] FILE [FILE ...]" |
| #define touch_full_usage \ |
| "Update the last-modified date on the given FILE[s].\n\n" \ |
| "Options:\n" \ |
| "\t-c\tDo not create any files" |
| #define touch_example_usage \ |
| "$ ls -l /tmp/foo\n" \ |
| "/bin/ls: /tmp/foo: No such file or directory\n" \ |
| "$ touch /tmp/foo\n" \ |
| "$ ls -l /tmp/foo\n" \ |
| "-rw-rw-r-- 1 andersen andersen 0 Apr 15 01:11 /tmp/foo\n" |
| |
| #define tr_trivial_usage \ |
| "[-cds] STRING1 [STRING2]" |
| #define tr_full_usage \ |
| "Translate, squeeze, and/or delete characters from\n" \ |
| "standard input, writing to standard output.\n\n" \ |
| "Options:\n" \ |
| "\t-c\ttake complement of STRING1\n" \ |
| "\t-d\tdelete input characters coded STRING1\n" \ |
| "\t-s\tsqueeze multiple output characters of STRING2 into one character" |
| #define tr_example_usage \ |
| "$ echo \"gdkkn vnqkc\" | tr [a-y] [b-z]\n" \ |
| "hello world\n" |
| |
| #define traceroute_trivial_usage \ |
| "[-FIldnrv] [-f 1st_ttl] [-m max_ttl] [-p port#] [-q nqueries]\n" \ |
| "\t[-s src_addr] [-t tos] [-w wait] [-g gateway] [-i iface]\n" \ |
| "\t[-z pausemsecs] host [data size]" |
| #define traceroute_full_usage \ |
| "trace the route ip packets follow going to \"host\"\n" \ |
| "Options:\n" \ |
| "\t-F\tSet the don't fragment bit\n" \ |
| "\t-I\tUse ICMP ECHO instead of UDP datagrams\n" \ |
| "\t-l\tDisplay the ttl value of the returned packet\n" \ |
| "\t-d\tSet SO_DEBUG options to socket\n" \ |
| "\t-n\tPrint hop addresses numerically rather than symbolically\n" \ |
| "\t-r\tBypass the normal routing tables and send directly to a host\n" \ |
| "\t-v\tVerbose output\n" \ |
| "\t-m max_ttl\tSet the max time-to-live (max number of hops)\n" \ |
| "\t-p port#\tSet the base UDP port number used in probes\n" \ |
| "\t\t(default is 33434)\n" \ |
| "\t-q nqueries\tSet the number of probes per ``ttl'' to nqueries\n" \ |
| "\t\t(default is 3)\n" \ |
| "\t-s src_addr\tUse the following IP address as the source address\n" \ |
| "\t-t tos\tSet the type-of-service in probe packets to the following value\n" \ |
| "\t\t(default 0)\n" \ |
| "\t-w wait\tSet the time (in seconds) to wait for a response to a probe\n" \ |
| "\t\t(default 3 sec)\n" \ |
| "\t-g\tSpecify a loose source route gateway (8 maximum)" |
| |
| |
| #define true_trivial_usage \ |
| "" |
| #define true_full_usage \ |
| "Return an exit code of TRUE (0)." |
| #define true_example_usage \ |
| "$ true\n" \ |
| "$ echo $?\n" \ |
| "0\n" |
| |
| #define tty_trivial_usage \ |
| "" |
| #define tty_full_usage \ |
| "Print the file name of the terminal connected to standard input.\n\n" \ |
| "Options:\n" \ |
| "\t-s\tprint nothing, only return an exit status" |
| #define tty_example_usage \ |
| "$ tty\n" \ |
| "/dev/tty2\n" |
| |
| #define tune2fs_trivial_usage \ |
| "[-c max-mounts-count] [-e errors-behavior] [-g group] " \ |
| "[-i interval[d|m|w]] [-j] [-J journal-options] [-l] [-s sparse-flag] " \ |
| "[-m reserved-blocks-percent] [-o [^]mount-options[,...]] " \ |
| "[-r reserved-blocks-count] [-u user] [-C mount-count] " \ |
| "[-L volume-label] [-M last-mounted-dir] [-O [^]feature[,...]] " \ |
| "[-T last-check-time] [-U UUID] device" |
| #define tune2fs_full_usage \ |
| "Adjust filesystem options on ext[23] filesystems." |
| |
| #define udhcpc_trivial_usage \ |
| "[-Cfbnqtv] [-c CID] [-V VCLS] [-H HOSTNAME] [-i INTERFACE]\n[-p pidfile] [-r IP] [-s script]" |
| #define udhcpc_full_usage \ |
| "\t-c,\t--clientid=CLIENTID\tSet client identifier\n" \ |
| "\t-C,\t--clientid-none\tSuppress default client identifier\n" \ |
| "\t-V,\t--vendorclass=CLASSID\tSet vendor class identifier\n" \ |
| "\t-H,\t--hostname=HOSTNAME\tClient hostname\n" \ |
| "\t-h,\t \tAlias for -H\n" \ |
| "\t-f,\t--foreground\tDo not fork after getting lease\n" \ |
| "\t-b,\t--background\tFork to background if lease cannot be immediately negotiated\n" \ |
| "\t-i,\t--interface=INTERFACE\tInterface to use (default: eth0)\n" \ |
| "\t-n,\t--now\tExit with failure if lease cannot be immediately negotiated\n" \ |
| "\t-p,\t--pidfile=file\tStore process ID of daemon in file\n" \ |
| "\t-q,\t--quit\tQuit after obtaining lease\n" \ |
| "\t-r,\t--request=IP\tIP address to request (default: none)\n" \ |
| "\t-s,\t--script=file\tRun file at dhcp events (default: /usr/share/udhcpc/default.script)\n" \ |
| "\t-t,\t--retries=NUM\tSend up to NUM request packets\n"\ |
| "\t-v,\t--version\tDisplay version" |
| |
| #define udhcpd_trivial_usage \ |
| "[configfile]\n" \ |
| |
| #define udhcpd_full_usage \ |
| "" |
| |
| #ifdef CONFIG_FEATURE_MOUNT_FORCE |
| # define USAGE_MOUNT_FORCE(a) a |
| #else |
| # define USAGE_MOUNT_FORCE(a) |
| #endif |
| #define umount_trivial_usage \ |
| "[flags] FILESYSTEM|DIRECTORY" |
| #define umount_full_usage \ |
| "Unmount file systems\n" \ |
| "\nFlags:\n" "\t-a\tUnmount all file systems" \ |
| USAGE_MTAB(" in /etc/mtab\n\t-n\tDon't erase /etc/mtab entries") \ |
| "\n\t-r\tTry to remount devices as read-only if mount is busy" \ |
| "\n\t-l\tLazy umount (detach filesystem)" \ |
| "\n\t-f\tForce umount (i.e., unreachable NFS server)" \ |
| USAGE_MOUNT_LOOP("\n\t-D\tDo not free loop device (if a loop device has been used)") |
| #define umount_example_usage \ |
| "$ umount /dev/hdc1 \n" |
| |
| #define uname_trivial_usage \ |
| "[OPTION]..." |
| #define uname_full_usage \ |
| "Print certain system information. With no OPTION, same as -s.\n\n" \ |
| "Options:\n" \ |
| "\t-a\tprint all information\n" \ |
| "\t-m\tthe machine (hardware) type\n" \ |
| "\t-n\tprint the machine's network node hostname\n" \ |
| "\t-r\tprint the operating system release\n" \ |
| "\t-s\tprint the operating system name\n" \ |
| "\t-p\tprint the host processor type\n" \ |
| "\t-v\tprint the operating system version" |
| #define uname_example_usage \ |
| "$ uname -a\n" \ |
| "Linux debian 2.4.23 #2 Tue Dec 23 17:09:10 MST 2003 i686 GNU/Linux\n" |
| |
| #define uncompress_trivial_usage \ |
| "[-c] [-f] [ name ... ]" |
| #define uncompress_full_usage \ |
| "Uncompress .Z file[s]\n" \ |
| "Options:\n" \ |
| "\t-c\textract to stdout\n" \ |
| "\t-f\tforce overwrite an existing file" |
| |
| #define uniq_trivial_usage \ |
| "[-fscdu]... [INPUT [OUTPUT]]" |
| #define uniq_full_usage \ |
| "Discard all but one of successive identical lines from INPUT\n" \ |
| "(or standard input), writing to OUTPUT (or standard output).\n\n" \ |
| "Options:\n" \ |
| "\t-c\tprefix lines by the number of occurrences\n" \ |
| "\t-d\tonly print duplicate lines\n" \ |
| "\t-u\tonly print unique lines\n" \ |
| "\t-f N\tskip the first N fields\n" \ |
| "\t-s N\tskip the first N chars (after any skipped fields)" |
| #define uniq_example_usage \ |
| "$ echo -e \"a\\na\\nb\\nc\\nc\\na\" | sort | uniq\n" \ |
| "a\n" \ |
| "b\n" \ |
| "c\n" |
| |
| #define unix2dos_trivial_usage \ |
| "[option] [FILE]" |
| #define unix2dos_full_usage \ |
| "Converts FILE from unix format to dos format. When no option\n" \ |
| "is given, the input is converted to the opposite output format.\n" \ |
| "When no file is given, uses stdin for input and stdout for output.\n" \ |
| "Options:\n" \ |
| "\t-u\toutput will be in UNIX format\n" \ |
| "\t-d\toutput will be in DOS format" |
| |
| #define unzip_trivial_usage \ |
| "[-opts[modifiers]] file[.zip] [list] [-x xlist] [-d exdir]" |
| #define unzip_full_usage \ |
| "Extracts files from ZIP archives.\n\n" \ |
| "Options:\n" \ |
| "\t-l\tlist archive contents (short form)\n" \ |
| "\t-n\tnever overwrite existing files (default)\n" \ |
| "\t-o\toverwrite files without prompting\n" \ |
| "\t-p\tsend output to stdout\n" \ |
| "\t-q\tbe quiet\n" \ |
| "\t-x\texclude these files\n" \ |
| "\t-d\textract files into this directory" |
| |
| #define uptime_trivial_usage \ |
| "" |
| #define uptime_full_usage \ |
| "Display the time since the last boot." |
| #define uptime_example_usage \ |
| "$ uptime\n" \ |
| " 1:55pm up 2:30, load average: 0.09, 0.04, 0.00\n" |
| |
| #define usleep_trivial_usage \ |
| "N" |
| #define usleep_full_usage \ |
| "Pause for N microseconds." |
| #define usleep_example_usage \ |
| "$ usleep 1000000\n" \ |
| "[pauses for 1 second]\n" |
| |
| #define uudecode_trivial_usage \ |
| "[FILE]..." |
| #define uudecode_full_usage \ |
| "Uudecode a file that is uuencoded.\n\n" \ |
| "Options:\n" \ |
| "\t-o FILE\tdirect output to FILE" |
| #define uudecode_example_usage \ |
| "$ uudecode -o busybox busybox.uu\n" \ |
| "$ ls -l busybox\n" \ |
| "-rwxr-xr-x 1 ams ams 245264 Jun 7 21:35 busybox\n" |
| |
| #define uuencode_trivial_usage \ |
| "[OPTION] [INFILE] REMOTEFILE" |
| #define uuencode_full_usage \ |
| "Uuencode a file.\n\n" \ |
| "Options:\n" \ |
| "\t-m\tuse base64 encoding per RFC1521" |
| #define uuencode_example_usage \ |
| "$ uuencode busybox busybox\n" \ |
| "begin 755 busybox\n" \ |
| "<encoded file snipped>\n" \ |
| "$ uudecode busybox busybox > busybox.uu\n" \ |
| "$\n" |
| |
| #define vconfig_trivial_usage \ |
| "COMMAND [OPTIONS] ..." |
| #define vconfig_full_usage \ |
| "vconfig lets you create and remove virtual ethernet devices.\n\n" \ |
| "Options:\n" \ |
| "\tadd [interface-name] [vlan_id]\n" \ |
| "\trem [vlan-name]\n" \ |
| "\tset_flag [interface-name] [flag-num] [0 | 1]\n" \ |
| "\tset_egress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ |
| "\tset_ingress_map [vlan-name] [skb_priority] [vlan_qos]\n" \ |
| "\tset_name_type [name-type]" |
| |
| #define vi_trivial_usage \ |
| "[OPTION] [FILE]..." |
| #define vi_full_usage \ |
| "edit FILE.\n\n" \ |
| "Options:\n" \ |
| "\t-R\tRead-only- do not write to the file" |
| |
| #define vlock_trivial_usage \ |
| "[OPTIONS]" |
| #define vlock_full_usage \ |
| "Lock a virtual terminal. A password is required to unlock\n" \ |
| "Options:\n" \ |
| "\t-a\tLock all VTs" |
| |
| #define watch_trivial_usage \ |
| "[-n <seconds>] COMMAND..." |
| #define watch_full_usage \ |
| "Executes a program periodically.\n" \ |
| "Options:\n" \ |
| "\t-n\tLoop period in seconds - default is 2" |
| #define watch_example_usage \ |
| "$ watch date\n" \ |
| "Mon Dec 17 10:31:40 GMT 2000\n" \ |
| "Mon Dec 17 10:31:42 GMT 2000\n" \ |
| "Mon Dec 17 10:31:44 GMT 2000" |
| |
| #define watchdog_trivial_usage \ |
| "[-t <seconds>] [-F] DEV" |
| #define watchdog_full_usage \ |
| "Periodically write to watchdog device DEV.\n" \ |
| "Options:\n" \ |
| "\t-t\tTimer period in seconds - default is 30\n" \ |
| "\t-F\tStay in the foreground and don't fork" |
| |
| #define wc_trivial_usage \ |
| "[OPTION]... [FILE]..." |
| #define wc_full_usage \ |
| "Print line, word, and byte counts for each FILE, and a total line if\n" \ |
| "more than one FILE is specified. With no FILE, read standard input.\n\n" \ |
| "Options:\n" \ |
| "\t-c\tprint the byte counts\n" \ |
| "\t-l\tprint the newline counts\n" \ |
| "\t-L\tprint the length of the longest line\n" \ |
| "\t-w\tprint the word counts" |
| #define wc_example_usage \ |
| "$ wc /etc/passwd\n" \ |
| " 31 46 1365 /etc/passwd\n" |
| |
| #define wget_trivial_usage \ |
| "[-c|--continue] [-q|--quiet] [-O|--output-document file]\n" \ |
| "\t\t[--header 'header: value'] [-Y|--proxy on/off] [-P DIR] url" |
| #define wget_full_usage \ |
| "wget retrieves files via HTTP or FTP\n\n" \ |
| "Options:\n" \ |
| "\t-c\tcontinue retrieval of aborted transfers\n" \ |
| "\t-q\tquiet mode - do not print\n" \ |
| "\t-P\tSet directory prefix to DIR\n" \ |
| "\t-O\tsave to filename ('-' for stdout)\n" \ |
| "\t-Y\tuse proxy ('on' or 'off')" |
| |
| #define which_trivial_usage \ |
| "[COMMAND ...]" |
| #define which_full_usage \ |
| "Locates a COMMAND." |
| #define which_example_usage \ |
| "$ which login\n" \ |
| "/bin/login\n" |
| |
| #define who_trivial_usage \ |
| " " |
| #define who_full_usage \ |
| "Prints the current user names and related information" |
| |
| #define whoami_trivial_usage \ |
| "" |
| #define whoami_full_usage \ |
| "Prints the user name associated with the current effective user id." |
| |
| #ifdef CONFIG_FEATURE_XARGS_SUPPORT_CONFIRMATION |
| #define USAGE_XARGS_CONFIRMATION(a) a |
| #else |
| #define USAGE_XARGS_CONFIRMATION(a) |
| #endif |
| #ifdef CONFIG_FEATURE_XARGS_SUPPORT_TERMOPT |
| #define USAGE_XARGS_TERMOPT(a) a |
| #else |
| #define USAGE_XARGS_TERMOPT(a) |
| #endif |
| #ifdef CONFIG_FEATURE_XARGS_SUPPORT_ZERO_TERM |
| #define USAGE_XARGS_ZERO_TERM(a) a |
| #else |
| #define USAGE_XARGS_ZERO_TERM(a) |
| #endif |
| |
| |
| #define xargs_trivial_usage \ |
| "[COMMAND] [OPTIONS] [ARGS...]" |
| #define xargs_full_usage \ |
| "Executes COMMAND on every item given by standard input.\n\n" \ |
| "Options:\n" \ |
| USAGE_XARGS_CONFIRMATION("\t-p\tPrompt the user about whether to run each command\n") \ |
| "\t-r\tDo not run command for empty read lines\n" \ |
| USAGE_XARGS_TERMOPT("\t-x\tExit if the size is exceeded\n") \ |
| USAGE_XARGS_ZERO_TERM("\t-0\tInput filenames are terminated by a null character\n") \ |
| "\t-t\tPrint the command line on stderr before executing it" |
| #define xargs_example_usage \ |
| "$ ls | xargs gzip\n" \ |
| "$ find . -name '*.c' -print | xargs rm\n" |
| |
| #define yes_trivial_usage \ |
| "[OPTION]... [STRING]..." |
| #define yes_full_usage \ |
| "Repeatedly outputs a line with all specified STRING(s), or 'y'." |
| |
| #define zcat_trivial_usage \ |
| "FILE" |
| #define zcat_full_usage \ |
| "Uncompress to stdout." |
| |
| #define zcip_trivial_usage \ |
| "[OPTIONS] ifname script" |
| #define zcip_full_usage \ |
| "zcip manages a ZeroConf IPv4 link-local address.\n" \ |
| "Options:\n" \ |
| "\t-f foreground mode\n" \ |
| "\t-q quit after address (no daemon)\n" \ |
| "\t-r 169.254.x.x request this address first\n" \ |
| "\t-v verbose" |
| |
| #endif /* __BB_USAGE_H__ */ |