diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
new file mode 100644
index 0000000..f1967ee
--- /dev/null
+++ b/arch/arc/mm/tlbex.S
@@ -0,0 +1,417 @@
+/*
+ * TLB Exception Handling for ARC
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Vineetg: April 2011 :
+ *  -MMU v1: moved out legacy code into a seperate file
+ *  -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
+ *      helps avoid a shift when preparing PD0 from PTE
+ *
+ * Vineetg: July 2009
+ *  -For MMU V2, we need not do heuristics at the time of commiting a D-TLB
+ *   entry, so that it doesn't knock out it's I-TLB entry
+ *  -Some more fine tuning:
+ *   bmsk instead of add, asl.cc instead of branch, delay slot utilise etc
+ *
+ * Vineetg: July 2009
+ *  -Practically rewrote the I/D TLB Miss handlers
+ *   Now 40 and 135 instructions a peice as compared to 131 and 449 resp.
+ *   Hence Leaner by 1.5 K
+ *   Used Conditional arithmetic to replace excessive branching
+ *   Also used short instructions wherever possible
+ *
+ * Vineetg: Aug 13th 2008
+ *  -Passing ECR (Exception Cause REG) to do_page_fault( ) for printing
+ *   more information in case of a Fatality
+ *
+ * Vineetg: March 25th Bug #92690
+ *  -Added Debug Code to check if sw-ASID == hw-ASID
+
+ * Rahul Trivedi, Amit Bhor: Codito Technologies 2004
+ */
+
+#include <linux/linkage.h>
+#include <asm/entry.h>
+#include <asm/mmu.h>
+#include <asm/pgtable.h>
+#include <asm/arcregs.h>
+#include <asm/cache.h>
+#include <asm/processor.h>
+#include <asm/tlb-mmu1.h>
+
+#ifdef CONFIG_ISA_ARCOMPACT
+;-----------------------------------------------------------------
+; ARC700 Exception Handling doesn't auto-switch stack and it only provides
+; ONE scratch AUX reg "ARC_REG_SCRATCH_DATA0"
+;
+; For Non-SMP, the scratch AUX reg is repurposed to cache task PGD, so a
+; "global" is used to free-up FIRST core reg to be able to code the rest of
+; exception prologue (IRQ auto-disabled on Exceptions, so it's IRQ-safe).
+; Since the Fast Path TLB Miss handler is coded with 4 regs, the remaining 3
+; need to be saved as well by extending the "global" to be 4 words. Hence
+;	".size   ex_saved_reg1, 16"
+; [All of this dance is to avoid stack switching for each TLB Miss, since we
+; only need to save only a handful of regs, as opposed to complete reg file]
+;
+; For ARC700 SMP, the "global" obviously can't be used for free up the FIRST
+; core reg as it will not be SMP safe.
+; Thus scratch AUX reg is used (and no longer used to cache task PGD).
+; To save the rest of 3 regs - per cpu, the global is made "per-cpu".
+; Epilogue thus has to locate the "per-cpu" storage for regs.
+; To avoid cache line bouncing the per-cpu global is aligned/sized per
+; L1_CACHE_SHIFT, despite fundamentally needing to be 12 bytes only. Hence
+;	".size   ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)"
+
+; As simple as that....
+;--------------------------------------------------------------------------
+
+; scratch memory to save [r0-r3] used to code TLB refill Handler
+ARCFP_DATA ex_saved_reg1
+	.align 1 << L1_CACHE_SHIFT
+	.type   ex_saved_reg1, @object
+#ifdef CONFIG_SMP
+	.size   ex_saved_reg1, (CONFIG_NR_CPUS << L1_CACHE_SHIFT)
+ex_saved_reg1:
+	.zero (CONFIG_NR_CPUS << L1_CACHE_SHIFT)
+#else
+	.size   ex_saved_reg1, 16
+ex_saved_reg1:
+	.zero 16
+#endif
+
+.macro TLBMISS_FREEUP_REGS
+#ifdef CONFIG_SMP
+	sr  r0, [ARC_REG_SCRATCH_DATA0]	; freeup r0 to code with
+	GET_CPU_ID  r0			; get to per cpu scratch mem,
+	asl r0, r0, L1_CACHE_SHIFT	; cache line wide per cpu
+	add r0, @ex_saved_reg1, r0
+#else
+	st    r0, [@ex_saved_reg1]
+	mov_s r0, @ex_saved_reg1
+#endif
+	st_s  r1, [r0, 4]
+	st_s  r2, [r0, 8]
+	st_s  r3, [r0, 12]
+
+	; VERIFY if the ASID in MMU-PID Reg is same as
+	; one in Linux data structures
+
+	tlb_paranoid_check_asm
+.endm
+
+.macro TLBMISS_RESTORE_REGS
+#ifdef CONFIG_SMP
+	GET_CPU_ID  r0			; get to per cpu scratch mem
+	asl r0, r0, L1_CACHE_SHIFT	; each is cache line wide
+	add r0, @ex_saved_reg1, r0
+	ld_s  r3, [r0,12]
+	ld_s  r2, [r0, 8]
+	ld_s  r1, [r0, 4]
+	lr    r0, [ARC_REG_SCRATCH_DATA0]
+#else
+	mov_s r0, @ex_saved_reg1
+	ld_s  r3, [r0,12]
+	ld_s  r2, [r0, 8]
+	ld_s  r1, [r0, 4]
+	ld_s  r0, [r0]
+#endif
+.endm
+
+#else	/* ARCv2 */
+
+.macro TLBMISS_FREEUP_REGS
+	PUSH  r0
+	PUSH  r1
+	PUSH  r2
+	PUSH  r3
+.endm
+
+.macro TLBMISS_RESTORE_REGS
+	POP   r3
+	POP   r2
+	POP   r1
+	POP   r0
+.endm
+
+#endif
+
+;============================================================================
+;  Troubleshooting Stuff
+;============================================================================
+
+; Linux keeps ASID (Address Space ID) in task->active_mm->context.asid
+; When Creating TLB Entries, instead of doing 3 dependent loads from memory,
+; we use the MMU PID Reg to get current ASID.
+; In bizzare scenrios SW and HW ASID can get out-of-sync which is trouble.
+; So we try to detect this in TLB Mis shandler
+
+.macro tlb_paranoid_check_asm
+
+#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
+
+	GET_CURR_TASK_ON_CPU  r3
+	ld r0, [r3, TASK_ACT_MM]
+	ld r0, [r0, MM_CTXT+MM_CTXT_ASID]
+	breq r0, 0, 55f	; Error if no ASID allocated
+
+	lr r1, [ARC_REG_PID]
+	and r1, r1, 0xFF
+
+	and r2, r0, 0xFF	; MMU PID bits only for comparison
+	breq r1, r2, 5f
+
+55:
+	; Error if H/w and S/w ASID don't match, but NOT if in kernel mode
+	lr  r2, [erstatus]
+	bbit0 r2, STATUS_U_BIT, 5f
+
+	; We sure are in troubled waters, Flag the error, but to do so
+	; need to switch to kernel mode stack to call error routine
+	GET_TSK_STACK_BASE   r3, sp
+
+	; Call printk to shoutout aloud
+	mov r2, 1
+	j print_asid_mismatch
+
+5:	; ASIDs match so proceed normally
+	nop
+
+#endif
+
+.endm
+
+;============================================================================
+;TLB Miss handling Code
+;============================================================================
+
+;-----------------------------------------------------------------------------
+; This macro does the page-table lookup for the faulting address.
+; OUT: r0 = PTE faulted on, r1 = ptr to PTE, r2 = Faulting V-address
+.macro LOAD_FAULT_PTE
+
+	lr  r2, [efa]
+
+#ifndef CONFIG_SMP
+	lr  r1, [ARC_REG_SCRATCH_DATA0] ; current pgd
+#else
+	GET_CURR_TASK_ON_CPU  r1
+	ld  r1, [r1, TASK_ACT_MM]
+	ld  r1, [r1, MM_PGD]
+#endif
+
+	lsr     r0, r2, PGDIR_SHIFT     ; Bits for indexing into PGD
+	ld.as   r3, [r1, r0]            ; PGD entry corresp to faulting addr
+	tst	r3, r3
+	bz	do_slow_path_pf         ; if no Page Table, do page fault
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	and.f	0, r3, _PAGE_HW_SZ	; Is this Huge PMD (thp)
+	add2.nz	r1, r1, r0
+	bnz.d	2f		; YES: PGD == PMD has THP PTE: stop pgd walk
+	mov.nz	r0, r3
+
+#endif
+	and	r1, r3, PAGE_MASK
+
+	; Get the PTE entry: The idea is
+	; (1) x = addr >> PAGE_SHIFT 	-> masks page-off bits from @fault-addr
+	; (2) y = x & (PTRS_PER_PTE - 1) -> to get index
+	; (3) z = (pgtbl + y * 4)
+
+#ifdef CONFIG_ARC_HAS_PAE40
+#define PTE_SIZE_LOG	3	/* 8 == 2 ^ 3 */
+#else
+#define PTE_SIZE_LOG	2	/* 4 == 2 ^ 2 */
+#endif
+
+	; multiply in step (3) above avoided by shifting lesser in step (1)
+	lsr     r0, r2, ( PAGE_SHIFT - PTE_SIZE_LOG )
+	and     r0, r0, ( (PTRS_PER_PTE - 1) << PTE_SIZE_LOG )
+	ld.aw   r0, [r1, r0]            ; r0: PTE (lower word only for PAE40)
+					; r1: PTE ptr
+
+2:
+
+#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
+	and.f 0, r0, _PAGE_PRESENT
+	bz   1f
+	ld   r3, [num_pte_not_present]
+	add  r3, r3, 1
+	st   r3, [num_pte_not_present]
+1:
+#endif
+
+.endm
+
+;-----------------------------------------------------------------
+; Convert Linux PTE entry into TLB entry
+; A one-word PTE entry is programmed as two-word TLB Entry [PD0:PD1] in mmu
+;    (for PAE40, two-words PTE, while three-word TLB Entry [PD0:PD1:PD1HI])
+; IN: r0 = PTE, r1 = ptr to PTE
+
+.macro CONV_PTE_TO_TLB
+	and    r3, r0, PTE_BITS_RWX	;          r  w  x
+	asl    r2, r3, 3		; Kr Kw Kx 0  0  0 (GLOBAL, kernel only)
+	and.f  0,  r0, _PAGE_GLOBAL
+	or.z   r2, r2, r3		; Kr Kw Kx Ur Uw Ux (!GLOBAL, user page)
+
+	and r3, r0, PTE_BITS_NON_RWX_IN_PD1 ; Extract PFN+cache bits from PTE
+	or  r3, r3, r2
+
+	sr  r3, [ARC_REG_TLBPD1]    	; paddr[31..13] | Kr Kw Kx Ur Uw Ux | C
+#ifdef	CONFIG_ARC_HAS_PAE40
+	ld	r3, [r1, 4]		; paddr[39..32]
+	sr	r3, [ARC_REG_TLBPD1HI]
+#endif
+
+	and r2, r0, PTE_BITS_IN_PD0 ; Extract other PTE flags: (V)alid, (G)lb
+
+	lr  r3,[ARC_REG_TLBPD0]     ; MMU prepares PD0 with vaddr and asid
+
+	or  r3, r3, r2              ; S | vaddr | {sasid|asid}
+	sr  r3,[ARC_REG_TLBPD0]     ; rewrite PD0
+.endm
+
+;-----------------------------------------------------------------
+; Commit the TLB entry into MMU
+
+.macro COMMIT_ENTRY_TO_MMU
+#if (CONFIG_ARC_MMU_VER < 4)
+
+	/* Get free TLB slot: Set = computed from vaddr, way = random */
+	sr  TLBGetIndex, [ARC_REG_TLBCOMMAND]
+
+	/* Commit the Write */
+#if (CONFIG_ARC_MMU_VER >= 2)   /* introduced in v2 */
+	sr TLBWriteNI, [ARC_REG_TLBCOMMAND]
+#else
+	sr TLBWrite, [ARC_REG_TLBCOMMAND]
+#endif
+
+#else
+	sr TLBInsertEntry, [ARC_REG_TLBCOMMAND]
+#endif
+.endm
+
+
+ARCFP_CODE	;Fast Path Code, candidate for ICCM
+
+;-----------------------------------------------------------------------------
+; I-TLB Miss Exception Handler
+;-----------------------------------------------------------------------------
+
+ENTRY(EV_TLBMissI)
+
+	TLBMISS_FREEUP_REGS
+
+#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
+	ld  r0, [@numitlb]
+	add r0, r0, 1
+	st  r0, [@numitlb]
+#endif
+
+	;----------------------------------------------------------------
+	; Get the PTE corresponding to V-addr accessed, r2 is setup with EFA
+	LOAD_FAULT_PTE
+
+	;----------------------------------------------------------------
+	; VERIFY_PTE: Check if PTE permissions approp for executing code
+	cmp_s   r2, VMALLOC_START
+	mov_s   r2, (_PAGE_PRESENT | _PAGE_EXECUTE)
+	or.hs   r2, r2, _PAGE_GLOBAL
+
+	and     r3, r0, r2  ; Mask out NON Flag bits from PTE
+	xor.f   r3, r3, r2  ; check ( ( pte & flags_test ) == flags_test )
+	bnz     do_slow_path_pf
+
+	; Let Linux VM know that the page was accessed
+	or      r0, r0, _PAGE_ACCESSED  ; set Accessed Bit
+	st_s    r0, [r1]                ; Write back PTE
+
+	CONV_PTE_TO_TLB
+	COMMIT_ENTRY_TO_MMU
+	TLBMISS_RESTORE_REGS
+EV_TLBMissI_fast_ret:	; additional label for VDK OS-kit instrumentation
+	rtie
+
+END(EV_TLBMissI)
+
+;-----------------------------------------------------------------------------
+; D-TLB Miss Exception Handler
+;-----------------------------------------------------------------------------
+
+ENTRY(EV_TLBMissD)
+
+	TLBMISS_FREEUP_REGS
+
+#ifdef CONFIG_ARC_DBG_TLB_MISS_COUNT
+	ld  r0, [@numdtlb]
+	add r0, r0, 1
+	st  r0, [@numdtlb]
+#endif
+
+	;----------------------------------------------------------------
+	; Get the PTE corresponding to V-addr accessed
+	; If PTE exists, it will setup, r0 = PTE, r1 = Ptr to PTE, r2 = EFA
+	LOAD_FAULT_PTE
+
+	;----------------------------------------------------------------
+	; VERIFY_PTE: Chk if PTE permissions approp for data access (R/W/R+W)
+
+	cmp_s	r2, VMALLOC_START
+	mov_s   r2, _PAGE_PRESENT	; common bit for K/U PTE
+	or.hs	r2, r2, _PAGE_GLOBAL	; kernel PTE only
+
+	; Linux PTE [RWX] bits are semantically overloaded:
+	; -If PAGE_GLOBAL set, they refer to kernel-only flags (vmalloc)
+	; -Otherwise they are user-mode permissions, and those are exactly
+	;  same for kernel mode as well (e.g. copy_(to|from)_user)
+
+	lr      r3, [ecr]
+	btst_s  r3, ECR_C_BIT_DTLB_LD_MISS	; Read Access
+	or.nz   r2, r2, _PAGE_READ      	; chk for Read flag in PTE
+	btst_s  r3, ECR_C_BIT_DTLB_ST_MISS	; Write Access
+	or.nz   r2, r2, _PAGE_WRITE     	; chk for Write flag in PTE
+	; Above laddering takes care of XCHG access (both R and W)
+
+	; By now, r2 setup with all the Flags we need to check in PTE
+	and     r3, r0, r2              ; Mask out NON Flag bits from PTE
+	brne.d  r3, r2, do_slow_path_pf ; is ((pte & flags_test) == flags_test)
+
+	;----------------------------------------------------------------
+	; UPDATE_PTE: Let Linux VM know that page was accessed/dirty
+	lr      r3, [ecr]
+	or      r0, r0, _PAGE_ACCESSED        ; Accessed bit always
+	btst_s  r3,  ECR_C_BIT_DTLB_ST_MISS   ; See if it was a Write Access ?
+	or.nz   r0, r0, _PAGE_DIRTY           ; if Write, set Dirty bit as well
+	st_s    r0, [r1]                      ; Write back PTE
+
+	CONV_PTE_TO_TLB
+
+#if (CONFIG_ARC_MMU_VER == 1)
+	; MMU with 2 way set assoc J-TLB, needs some help in pathetic case of
+	; memcpy where 3 parties contend for 2 ways, ensuing a livelock.
+	; But only for old MMU or one with Metal Fix
+	TLB_WRITE_HEURISTICS
+#endif
+
+	COMMIT_ENTRY_TO_MMU
+	TLBMISS_RESTORE_REGS
+EV_TLBMissD_fast_ret:	; additional label for VDK OS-kit instrumentation
+	rtie
+
+;-------- Common routine to call Linux Page Fault Handler -----------
+do_slow_path_pf:
+
+	; Restore the 4-scratch regs saved by fast path miss handler
+	TLBMISS_RESTORE_REGS
+
+	; Slow path TLB Miss handled as a regular ARC Exception
+	; (stack switching / save the complete reg-file).
+	b  call_do_page_fault
+END(EV_TLBMissD)