File-copy from v4.4.100
This is the result of 'cp' from a linux-stable tree with the 'v4.4.100'
tag checked out (commit 26d6298789e695c9f627ce49a7bbd2286405798a) on
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Please refer to that tree for all history prior to this point.
Change-Id: I8a9ee2aea93cd29c52c847d0ce33091a73ae6afe
diff --git a/arch/powerpc/platforms/maple/setup.c b/arch/powerpc/platforms/maple/setup.c
new file mode 100644
index 0000000..a837188
--- /dev/null
+++ b/arch/powerpc/platforms/maple/setup.c
@@ -0,0 +1,393 @@
+/*
+ * Maple (970 eval board) setup code
+ *
+ * (c) Copyright 2004 Benjamin Herrenschmidt (benh@kernel.crashing.org),
+ * IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ */
+
+#undef DEBUG
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/user.h>
+#include <linux/tty.h>
+#include <linux/string.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/major.h>
+#include <linux/initrd.h>
+#include <linux/vt_kern.h>
+#include <linux/console.h>
+#include <linux/pci.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <linux/irq.h>
+#include <linux/seq_file.h>
+#include <linux/root_dev.h>
+#include <linux/serial.h>
+#include <linux/smp.h>
+#include <linux/bitops.h>
+#include <linux/of_device.h>
+#include <linux/memblock.h>
+
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/pgtable.h>
+#include <asm/io.h>
+#include <asm/pci-bridge.h>
+#include <asm/iommu.h>
+#include <asm/machdep.h>
+#include <asm/dma.h>
+#include <asm/cputable.h>
+#include <asm/time.h>
+#include <asm/mpic.h>
+#include <asm/rtas.h>
+#include <asm/udbg.h>
+#include <asm/nvram.h>
+
+#include "maple.h"
+
+#ifdef DEBUG
+#define DBG(fmt...) udbg_printf(fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+static unsigned long maple_find_nvram_base(void)
+{
+ struct device_node *rtcs;
+ unsigned long result = 0;
+
+ /* find NVRAM device */
+ rtcs = of_find_compatible_node(NULL, "nvram", "AMD8111");
+ if (rtcs) {
+ struct resource r;
+ if (of_address_to_resource(rtcs, 0, &r)) {
+ printk(KERN_EMERG "Maple: Unable to translate NVRAM"
+ " address\n");
+ goto bail;
+ }
+ if (!(r.flags & IORESOURCE_IO)) {
+ printk(KERN_EMERG "Maple: NVRAM address isn't PIO!\n");
+ goto bail;
+ }
+ result = r.start;
+ } else
+ printk(KERN_EMERG "Maple: Unable to find NVRAM\n");
+ bail:
+ of_node_put(rtcs);
+ return result;
+}
+
+static void maple_restart(char *cmd)
+{
+ unsigned int maple_nvram_base;
+ const unsigned int *maple_nvram_offset, *maple_nvram_command;
+ struct device_node *sp;
+
+ maple_nvram_base = maple_find_nvram_base();
+ if (maple_nvram_base == 0)
+ goto fail;
+
+ /* find service processor device */
+ sp = of_find_node_by_name(NULL, "service-processor");
+ if (!sp) {
+ printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
+ goto fail;
+ }
+ maple_nvram_offset = of_get_property(sp, "restart-addr", NULL);
+ maple_nvram_command = of_get_property(sp, "restart-value", NULL);
+ of_node_put(sp);
+
+ /* send command */
+ outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
+ for (;;) ;
+ fail:
+ printk(KERN_EMERG "Maple: Manual Restart Required\n");
+}
+
+static void maple_power_off(void)
+{
+ unsigned int maple_nvram_base;
+ const unsigned int *maple_nvram_offset, *maple_nvram_command;
+ struct device_node *sp;
+
+ maple_nvram_base = maple_find_nvram_base();
+ if (maple_nvram_base == 0)
+ goto fail;
+
+ /* find service processor device */
+ sp = of_find_node_by_name(NULL, "service-processor");
+ if (!sp) {
+ printk(KERN_EMERG "Maple: Unable to find Service Processor\n");
+ goto fail;
+ }
+ maple_nvram_offset = of_get_property(sp, "power-off-addr", NULL);
+ maple_nvram_command = of_get_property(sp, "power-off-value", NULL);
+ of_node_put(sp);
+
+ /* send command */
+ outb_p(*maple_nvram_command, maple_nvram_base + *maple_nvram_offset);
+ for (;;) ;
+ fail:
+ printk(KERN_EMERG "Maple: Manual Power-Down Required\n");
+}
+
+static void maple_halt(void)
+{
+ maple_power_off();
+}
+
+#ifdef CONFIG_SMP
+struct smp_ops_t maple_smp_ops = {
+ .probe = smp_mpic_probe,
+ .message_pass = smp_mpic_message_pass,
+ .kick_cpu = smp_generic_kick_cpu,
+ .setup_cpu = smp_mpic_setup_cpu,
+ .give_timebase = smp_generic_give_timebase,
+ .take_timebase = smp_generic_take_timebase,
+};
+#endif /* CONFIG_SMP */
+
+static void __init maple_use_rtas_reboot_and_halt_if_present(void)
+{
+ if (rtas_service_present("system-reboot") &&
+ rtas_service_present("power-off")) {
+ ppc_md.restart = rtas_restart;
+ pm_power_off = rtas_power_off;
+ ppc_md.halt = rtas_halt;
+ }
+}
+
+void __init maple_setup_arch(void)
+{
+ /* init to some ~sane value until calibrate_delay() runs */
+ loops_per_jiffy = 50000000;
+
+ /* Setup SMP callback */
+#ifdef CONFIG_SMP
+ smp_ops = &maple_smp_ops;
+#endif
+ /* Lookup PCI hosts */
+ maple_pci_init();
+
+#ifdef CONFIG_DUMMY_CONSOLE
+ conswitchp = &dummy_con;
+#endif
+ maple_use_rtas_reboot_and_halt_if_present();
+
+ printk(KERN_DEBUG "Using native/NAP idle loop\n");
+
+ mmio_nvram_init();
+}
+
+/*
+ * Early initialization.
+ */
+static void __init maple_init_early(void)
+{
+ DBG(" -> maple_init_early\n");
+
+ iommu_init_early_dart(&maple_pci_controller_ops);
+
+ DBG(" <- maple_init_early\n");
+}
+
+/*
+ * This is almost identical to pSeries and CHRP. We need to make that
+ * code generic at one point, with appropriate bits in the device-tree to
+ * identify the presence of an HT APIC
+ */
+static void __init maple_init_IRQ(void)
+{
+ struct device_node *root, *np, *mpic_node = NULL;
+ const unsigned int *opprop;
+ unsigned long openpic_addr = 0;
+ int naddr, n, i, opplen, has_isus = 0;
+ struct mpic *mpic;
+ unsigned int flags = 0;
+
+ /* Locate MPIC in the device-tree. Note that there is a bug
+ * in Maple device-tree where the type of the controller is
+ * open-pic and not interrupt-controller
+ */
+
+ for_each_node_by_type(np, "interrupt-controller")
+ if (of_device_is_compatible(np, "open-pic")) {
+ mpic_node = np;
+ break;
+ }
+ if (mpic_node == NULL)
+ for_each_node_by_type(np, "open-pic") {
+ mpic_node = np;
+ break;
+ }
+ if (mpic_node == NULL) {
+ printk(KERN_ERR
+ "Failed to locate the MPIC interrupt controller\n");
+ return;
+ }
+
+ /* Find address list in /platform-open-pic */
+ root = of_find_node_by_path("/");
+ naddr = of_n_addr_cells(root);
+ opprop = of_get_property(root, "platform-open-pic", &opplen);
+ if (opprop != 0) {
+ openpic_addr = of_read_number(opprop, naddr);
+ has_isus = (opplen > naddr);
+ printk(KERN_DEBUG "OpenPIC addr: %lx, has ISUs: %d\n",
+ openpic_addr, has_isus);
+ }
+
+ BUG_ON(openpic_addr == 0);
+
+ /* Check for a big endian MPIC */
+ if (of_get_property(np, "big-endian", NULL) != NULL)
+ flags |= MPIC_BIG_ENDIAN;
+
+ /* XXX Maple specific bits */
+ flags |= MPIC_U3_HT_IRQS;
+ /* All U3/U4 are big-endian, older SLOF firmware doesn't encode this */
+ flags |= MPIC_BIG_ENDIAN;
+
+ /* Setup the openpic driver. More device-tree junks, we hard code no
+ * ISUs for now. I'll have to revisit some stuffs with the folks doing
+ * the firmware for those
+ */
+ mpic = mpic_alloc(mpic_node, openpic_addr, flags,
+ /*has_isus ? 16 :*/ 0, 0, " MPIC ");
+ BUG_ON(mpic == NULL);
+
+ /* Add ISUs */
+ opplen /= sizeof(u32);
+ for (n = 0, i = naddr; i < opplen; i += naddr, n++) {
+ unsigned long isuaddr = of_read_number(opprop + i, naddr);
+ mpic_assign_isu(mpic, n, isuaddr);
+ }
+
+ /* All ISUs are setup, complete initialization */
+ mpic_init(mpic);
+ ppc_md.get_irq = mpic_get_irq;
+ of_node_put(mpic_node);
+ of_node_put(root);
+}
+
+static void __init maple_progress(char *s, unsigned short hex)
+{
+ printk("*** %04x : %s\n", hex, s ? s : "");
+}
+
+
+/*
+ * Called very early, MMU is off, device-tree isn't unflattened
+ */
+static int __init maple_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ if (!of_flat_dt_is_compatible(root, "Momentum,Maple") &&
+ !of_flat_dt_is_compatible(root, "Momentum,Apache"))
+ return 0;
+ /*
+ * On U3, the DART (iommu) must be allocated now since it
+ * has an impact on htab_initialize (due to the large page it
+ * occupies having to be broken up so the DART itself is not
+ * part of the cacheable linar mapping
+ */
+ alloc_dart_table();
+
+ hpte_init_native();
+ pm_power_off = maple_power_off;
+
+ return 1;
+}
+
+define_machine(maple) {
+ .name = "Maple",
+ .probe = maple_probe,
+ .setup_arch = maple_setup_arch,
+ .init_early = maple_init_early,
+ .init_IRQ = maple_init_IRQ,
+ .pci_irq_fixup = maple_pci_irq_fixup,
+ .pci_get_legacy_ide_irq = maple_pci_get_legacy_ide_irq,
+ .restart = maple_restart,
+ .halt = maple_halt,
+ .get_boot_time = maple_get_boot_time,
+ .set_rtc_time = maple_set_rtc_time,
+ .get_rtc_time = maple_get_rtc_time,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = maple_progress,
+ .power_save = power4_idle,
+};
+
+#ifdef CONFIG_EDAC
+/*
+ * Register a platform device for CPC925 memory controller on
+ * all boards with U3H (CPC925) bridge.
+ */
+static int __init maple_cpc925_edac_setup(void)
+{
+ struct platform_device *pdev;
+ struct device_node *np = NULL;
+ struct resource r;
+ int ret;
+ volatile void __iomem *mem;
+ u32 rev;
+
+ np = of_find_node_by_type(NULL, "memory-controller");
+ if (!np) {
+ printk(KERN_ERR "%s: Unable to find memory-controller node\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ ret = of_address_to_resource(np, 0, &r);
+ of_node_put(np);
+
+ if (ret < 0) {
+ printk(KERN_ERR "%s: Unable to get memory-controller reg\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ mem = ioremap(r.start, resource_size(&r));
+ if (!mem) {
+ printk(KERN_ERR "%s: Unable to map memory-controller memory\n",
+ __func__);
+ return -ENOMEM;
+ }
+
+ rev = __raw_readl(mem);
+ iounmap(mem);
+
+ if (rev < 0x34 || rev > 0x3f) { /* U3H */
+ printk(KERN_ERR "%s: Non-CPC925(U3H) bridge revision: %02x\n",
+ __func__, rev);
+ return 0;
+ }
+
+ pdev = platform_device_register_simple("cpc925_edac", 0, &r, 1);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+
+ printk(KERN_INFO "%s: CPC925 platform device created\n", __func__);
+
+ return 0;
+}
+machine_device_initcall(maple, maple_cpc925_edac_setup);
+#endif