File-copy from v4.4.100
This is the result of 'cp' from a linux-stable tree with the 'v4.4.100'
tag checked out (commit 26d6298789e695c9f627ce49a7bbd2286405798a) on
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Please refer to that tree for all history prior to this point.
Change-Id: I8a9ee2aea93cd29c52c847d0ce33091a73ae6afe
diff --git a/arch/x86/entry/common.c b/arch/x86/entry/common.c
new file mode 100644
index 0000000..1a4477c
--- /dev/null
+++ b/arch/x86/entry/common.c
@@ -0,0 +1,489 @@
+/*
+ * common.c - C code for kernel entry and exit
+ * Copyright (c) 2015 Andrew Lutomirski
+ * GPL v2
+ *
+ * Based on asm and ptrace code by many authors. The code here originated
+ * in ptrace.c and signal.c.
+ */
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/smp.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/tracehook.h>
+#include <linux/audit.h>
+#include <linux/seccomp.h>
+#include <linux/signal.h>
+#include <linux/export.h>
+#include <linux/context_tracking.h>
+#include <linux/user-return-notifier.h>
+#include <linux/uprobes.h>
+
+#include <asm/desc.h>
+#include <asm/traps.h>
+#include <asm/vdso.h>
+#include <asm/uaccess.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/syscalls.h>
+
+static struct thread_info *pt_regs_to_thread_info(struct pt_regs *regs)
+{
+ unsigned long top_of_stack =
+ (unsigned long)(regs + 1) + TOP_OF_KERNEL_STACK_PADDING;
+ return (struct thread_info *)(top_of_stack - THREAD_SIZE);
+}
+
+#ifdef CONFIG_CONTEXT_TRACKING
+/* Called on entry from user mode with IRQs off. */
+__visible void enter_from_user_mode(void)
+{
+ CT_WARN_ON(ct_state() != CONTEXT_USER);
+ user_exit();
+}
+#endif
+
+static void do_audit_syscall_entry(struct pt_regs *regs, u32 arch)
+{
+#ifdef CONFIG_X86_64
+ if (arch == AUDIT_ARCH_X86_64) {
+ audit_syscall_entry(regs->orig_ax, regs->di,
+ regs->si, regs->dx, regs->r10);
+ } else
+#endif
+ {
+ audit_syscall_entry(regs->orig_ax, regs->bx,
+ regs->cx, regs->dx, regs->si);
+ }
+}
+
+/*
+ * We can return 0 to resume the syscall or anything else to go to phase
+ * 2. If we resume the syscall, we need to put something appropriate in
+ * regs->orig_ax.
+ *
+ * NB: We don't have full pt_regs here, but regs->orig_ax and regs->ax
+ * are fully functional.
+ *
+ * For phase 2's benefit, our return value is:
+ * 0: resume the syscall
+ * 1: go to phase 2; no seccomp phase 2 needed
+ * anything else: go to phase 2; pass return value to seccomp
+ */
+unsigned long syscall_trace_enter_phase1(struct pt_regs *regs, u32 arch)
+{
+ struct thread_info *ti = pt_regs_to_thread_info(regs);
+ unsigned long ret = 0;
+ u32 work;
+
+ if (IS_ENABLED(CONFIG_DEBUG_ENTRY))
+ BUG_ON(regs != task_pt_regs(current));
+
+ work = ACCESS_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY;
+
+#ifdef CONFIG_CONTEXT_TRACKING
+ /*
+ * If TIF_NOHZ is set, we are required to call user_exit() before
+ * doing anything that could touch RCU.
+ */
+ if (work & _TIF_NOHZ) {
+ enter_from_user_mode();
+ work &= ~_TIF_NOHZ;
+ }
+#endif
+
+#ifdef CONFIG_SECCOMP
+ /*
+ * Do seccomp first -- it should minimize exposure of other
+ * code, and keeping seccomp fast is probably more valuable
+ * than the rest of this.
+ */
+ if (work & _TIF_SECCOMP) {
+ struct seccomp_data sd;
+
+ sd.arch = arch;
+ sd.nr = regs->orig_ax;
+ sd.instruction_pointer = regs->ip;
+#ifdef CONFIG_X86_64
+ if (arch == AUDIT_ARCH_X86_64) {
+ sd.args[0] = regs->di;
+ sd.args[1] = regs->si;
+ sd.args[2] = regs->dx;
+ sd.args[3] = regs->r10;
+ sd.args[4] = regs->r8;
+ sd.args[5] = regs->r9;
+ } else
+#endif
+ {
+ sd.args[0] = regs->bx;
+ sd.args[1] = regs->cx;
+ sd.args[2] = regs->dx;
+ sd.args[3] = regs->si;
+ sd.args[4] = regs->di;
+ sd.args[5] = regs->bp;
+ }
+
+ BUILD_BUG_ON(SECCOMP_PHASE1_OK != 0);
+ BUILD_BUG_ON(SECCOMP_PHASE1_SKIP != 1);
+
+ ret = seccomp_phase1(&sd);
+ if (ret == SECCOMP_PHASE1_SKIP) {
+ regs->orig_ax = -1;
+ ret = 0;
+ } else if (ret != SECCOMP_PHASE1_OK) {
+ return ret; /* Go directly to phase 2 */
+ }
+
+ work &= ~_TIF_SECCOMP;
+ }
+#endif
+
+ /* Do our best to finish without phase 2. */
+ if (work == 0)
+ return ret; /* seccomp and/or nohz only (ret == 0 here) */
+
+#ifdef CONFIG_AUDITSYSCALL
+ if (work == _TIF_SYSCALL_AUDIT) {
+ /*
+ * If there is no more work to be done except auditing,
+ * then audit in phase 1. Phase 2 always audits, so, if
+ * we audit here, then we can't go on to phase 2.
+ */
+ do_audit_syscall_entry(regs, arch);
+ return 0;
+ }
+#endif
+
+ return 1; /* Something is enabled that we can't handle in phase 1 */
+}
+
+/* Returns the syscall nr to run (which should match regs->orig_ax). */
+long syscall_trace_enter_phase2(struct pt_regs *regs, u32 arch,
+ unsigned long phase1_result)
+{
+ struct thread_info *ti = pt_regs_to_thread_info(regs);
+ long ret = 0;
+ u32 work = ACCESS_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY;
+
+ if (IS_ENABLED(CONFIG_DEBUG_ENTRY))
+ BUG_ON(regs != task_pt_regs(current));
+
+ /*
+ * If we stepped into a sysenter/syscall insn, it trapped in
+ * kernel mode; do_debug() cleared TF and set TIF_SINGLESTEP.
+ * If user-mode had set TF itself, then it's still clear from
+ * do_debug() and we need to set it again to restore the user
+ * state. If we entered on the slow path, TF was already set.
+ */
+ if (work & _TIF_SINGLESTEP)
+ regs->flags |= X86_EFLAGS_TF;
+
+#ifdef CONFIG_SECCOMP
+ /*
+ * Call seccomp_phase2 before running the other hooks so that
+ * they can see any changes made by a seccomp tracer.
+ */
+ if (phase1_result > 1 && seccomp_phase2(phase1_result)) {
+ /* seccomp failures shouldn't expose any additional code. */
+ return -1;
+ }
+#endif
+
+ if (unlikely(work & _TIF_SYSCALL_EMU))
+ ret = -1L;
+
+ if ((ret || test_thread_flag(TIF_SYSCALL_TRACE)) &&
+ tracehook_report_syscall_entry(regs))
+ ret = -1L;
+
+ if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT)))
+ trace_sys_enter(regs, regs->orig_ax);
+
+ do_audit_syscall_entry(regs, arch);
+
+ return ret ?: regs->orig_ax;
+}
+
+long syscall_trace_enter(struct pt_regs *regs)
+{
+ u32 arch = is_ia32_task() ? AUDIT_ARCH_I386 : AUDIT_ARCH_X86_64;
+ unsigned long phase1_result = syscall_trace_enter_phase1(regs, arch);
+
+ if (phase1_result == 0)
+ return regs->orig_ax;
+ else
+ return syscall_trace_enter_phase2(regs, arch, phase1_result);
+}
+
+#define EXIT_TO_USERMODE_LOOP_FLAGS \
+ (_TIF_SIGPENDING | _TIF_NOTIFY_RESUME | _TIF_UPROBE | \
+ _TIF_NEED_RESCHED | _TIF_USER_RETURN_NOTIFY)
+
+static void exit_to_usermode_loop(struct pt_regs *regs, u32 cached_flags)
+{
+ /*
+ * In order to return to user mode, we need to have IRQs off with
+ * none of _TIF_SIGPENDING, _TIF_NOTIFY_RESUME, _TIF_USER_RETURN_NOTIFY,
+ * _TIF_UPROBE, or _TIF_NEED_RESCHED set. Several of these flags
+ * can be set at any time on preemptable kernels if we have IRQs on,
+ * so we need to loop. Disabling preemption wouldn't help: doing the
+ * work to clear some of the flags can sleep.
+ */
+ while (true) {
+ /* We have work to do. */
+ local_irq_enable();
+
+ if (cached_flags & _TIF_NEED_RESCHED)
+ schedule();
+
+ if (cached_flags & _TIF_UPROBE)
+ uprobe_notify_resume(regs);
+
+ /* deal with pending signal delivery */
+ if (cached_flags & _TIF_SIGPENDING)
+ do_signal(regs);
+
+ if (cached_flags & _TIF_NOTIFY_RESUME) {
+ clear_thread_flag(TIF_NOTIFY_RESUME);
+ tracehook_notify_resume(regs);
+ }
+
+ if (cached_flags & _TIF_USER_RETURN_NOTIFY)
+ fire_user_return_notifiers();
+
+ /* Disable IRQs and retry */
+ local_irq_disable();
+
+ cached_flags = READ_ONCE(pt_regs_to_thread_info(regs)->flags);
+
+ if (!(cached_flags & EXIT_TO_USERMODE_LOOP_FLAGS))
+ break;
+
+ }
+}
+
+/* Called with IRQs disabled. */
+__visible inline void prepare_exit_to_usermode(struct pt_regs *regs)
+{
+ struct thread_info *ti = pt_regs_to_thread_info(regs);
+ u32 cached_flags;
+
+ if (IS_ENABLED(CONFIG_PROVE_LOCKING) && WARN_ON(!irqs_disabled()))
+ local_irq_disable();
+
+ lockdep_sys_exit();
+
+ cached_flags = READ_ONCE(ti->flags);
+
+ if (unlikely(cached_flags & EXIT_TO_USERMODE_LOOP_FLAGS))
+ exit_to_usermode_loop(regs, cached_flags);
+
+#ifdef CONFIG_COMPAT
+ /*
+ * Compat syscalls set TS_COMPAT. Make sure we clear it before
+ * returning to user mode. We need to clear it *after* signal
+ * handling, because syscall restart has a fixup for compat
+ * syscalls. The fixup is exercised by the ptrace_syscall_32
+ * selftest.
+ */
+ ti->status &= ~TS_COMPAT;
+#endif
+
+ user_enter();
+}
+
+#define SYSCALL_EXIT_WORK_FLAGS \
+ (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | \
+ _TIF_SINGLESTEP | _TIF_SYSCALL_TRACEPOINT)
+
+static void syscall_slow_exit_work(struct pt_regs *regs, u32 cached_flags)
+{
+ bool step;
+
+ audit_syscall_exit(regs);
+
+ if (cached_flags & _TIF_SYSCALL_TRACEPOINT)
+ trace_sys_exit(regs, regs->ax);
+
+ /*
+ * If TIF_SYSCALL_EMU is set, we only get here because of
+ * TIF_SINGLESTEP (i.e. this is PTRACE_SYSEMU_SINGLESTEP).
+ * We already reported this syscall instruction in
+ * syscall_trace_enter().
+ */
+ step = unlikely(
+ (cached_flags & (_TIF_SINGLESTEP | _TIF_SYSCALL_EMU))
+ == _TIF_SINGLESTEP);
+ if (step || cached_flags & _TIF_SYSCALL_TRACE)
+ tracehook_report_syscall_exit(regs, step);
+}
+
+/*
+ * Called with IRQs on and fully valid regs. Returns with IRQs off in a
+ * state such that we can immediately switch to user mode.
+ */
+__visible inline void syscall_return_slowpath(struct pt_regs *regs)
+{
+ struct thread_info *ti = pt_regs_to_thread_info(regs);
+ u32 cached_flags = READ_ONCE(ti->flags);
+
+ CT_WARN_ON(ct_state() != CONTEXT_KERNEL);
+
+ if (IS_ENABLED(CONFIG_PROVE_LOCKING) &&
+ WARN(irqs_disabled(), "syscall %ld left IRQs disabled", regs->orig_ax))
+ local_irq_enable();
+
+ /*
+ * First do one-time work. If these work items are enabled, we
+ * want to run them exactly once per syscall exit with IRQs on.
+ */
+ if (unlikely(cached_flags & SYSCALL_EXIT_WORK_FLAGS))
+ syscall_slow_exit_work(regs, cached_flags);
+
+ local_irq_disable();
+ prepare_exit_to_usermode(regs);
+}
+
+#if defined(CONFIG_X86_32) || defined(CONFIG_IA32_EMULATION)
+/*
+ * Does a 32-bit syscall. Called with IRQs on and does all entry and
+ * exit work and returns with IRQs off. This function is extremely hot
+ * in workloads that use it, and it's usually called from
+ * do_fast_syscall_32, so forcibly inline it to improve performance.
+ */
+#ifdef CONFIG_X86_32
+/* 32-bit kernels use a trap gate for INT80, and the asm code calls here. */
+__visible
+#else
+/* 64-bit kernels use do_syscall_32_irqs_off() instead. */
+static
+#endif
+__always_inline void do_syscall_32_irqs_on(struct pt_regs *regs)
+{
+ struct thread_info *ti = pt_regs_to_thread_info(regs);
+ unsigned int nr = (unsigned int)regs->orig_ax;
+
+#ifdef CONFIG_IA32_EMULATION
+ ti->status |= TS_COMPAT;
+#endif
+
+ if (READ_ONCE(ti->flags) & _TIF_WORK_SYSCALL_ENTRY) {
+ /*
+ * Subtlety here: if ptrace pokes something larger than
+ * 2^32-1 into orig_ax, this truncates it. This may or
+ * may not be necessary, but it matches the old asm
+ * behavior.
+ */
+ nr = syscall_trace_enter(regs);
+ }
+
+ if (likely(nr < IA32_NR_syscalls)) {
+ /*
+ * It's possible that a 32-bit syscall implementation
+ * takes a 64-bit parameter but nonetheless assumes that
+ * the high bits are zero. Make sure we zero-extend all
+ * of the args.
+ */
+ regs->ax = ia32_sys_call_table[nr](
+ (unsigned int)regs->bx, (unsigned int)regs->cx,
+ (unsigned int)regs->dx, (unsigned int)regs->si,
+ (unsigned int)regs->di, (unsigned int)regs->bp);
+ }
+
+ syscall_return_slowpath(regs);
+}
+
+#ifdef CONFIG_X86_64
+/* Handles INT80 on 64-bit kernels */
+__visible void do_syscall_32_irqs_off(struct pt_regs *regs)
+{
+ local_irq_enable();
+ do_syscall_32_irqs_on(regs);
+}
+#endif
+
+/* Returns 0 to return using IRET or 1 to return using SYSEXIT/SYSRETL. */
+__visible long do_fast_syscall_32(struct pt_regs *regs)
+{
+ /*
+ * Called using the internal vDSO SYSENTER/SYSCALL32 calling
+ * convention. Adjust regs so it looks like we entered using int80.
+ */
+
+ unsigned long landing_pad = (unsigned long)current->mm->context.vdso +
+ vdso_image_32.sym_int80_landing_pad;
+
+ /*
+ * SYSENTER loses EIP, and even SYSCALL32 needs us to skip forward
+ * so that 'regs->ip -= 2' lands back on an int $0x80 instruction.
+ * Fix it up.
+ */
+ regs->ip = landing_pad;
+
+ /*
+ * Fetch EBP from where the vDSO stashed it.
+ *
+ * WARNING: We are in CONTEXT_USER and RCU isn't paying attention!
+ */
+ local_irq_enable();
+ if (
+#ifdef CONFIG_X86_64
+ /*
+ * Micro-optimization: the pointer we're following is explicitly
+ * 32 bits, so it can't be out of range.
+ */
+ __get_user(*(u32 *)®s->bp,
+ (u32 __user __force *)(unsigned long)(u32)regs->sp)
+#else
+ get_user(*(u32 *)®s->bp,
+ (u32 __user __force *)(unsigned long)(u32)regs->sp)
+#endif
+ ) {
+
+ /* User code screwed up. */
+ local_irq_disable();
+ regs->ax = -EFAULT;
+#ifdef CONFIG_CONTEXT_TRACKING
+ enter_from_user_mode();
+#endif
+ prepare_exit_to_usermode(regs);
+ return 0; /* Keep it simple: use IRET. */
+ }
+
+ /* Now this is just like a normal syscall. */
+ do_syscall_32_irqs_on(regs);
+
+#ifdef CONFIG_X86_64
+ /*
+ * Opportunistic SYSRETL: if possible, try to return using SYSRETL.
+ * SYSRETL is available on all 64-bit CPUs, so we don't need to
+ * bother with SYSEXIT.
+ *
+ * Unlike 64-bit opportunistic SYSRET, we can't check that CX == IP,
+ * because the ECX fixup above will ensure that this is essentially
+ * never the case.
+ */
+ return regs->cs == __USER32_CS && regs->ss == __USER_DS &&
+ regs->ip == landing_pad &&
+ (regs->flags & (X86_EFLAGS_RF | X86_EFLAGS_TF)) == 0;
+#else
+ /*
+ * Opportunistic SYSEXIT: if possible, try to return using SYSEXIT.
+ *
+ * Unlike 64-bit opportunistic SYSRET, we can't check that CX == IP,
+ * because the ECX fixup above will ensure that this is essentially
+ * never the case.
+ *
+ * We don't allow syscalls at all from VM86 mode, but we still
+ * need to check VM, because we might be returning from sys_vm86.
+ */
+ return static_cpu_has(X86_FEATURE_SEP) &&
+ regs->cs == __USER_CS && regs->ss == __USER_DS &&
+ regs->ip == landing_pad &&
+ (regs->flags & (X86_EFLAGS_RF | X86_EFLAGS_TF | X86_EFLAGS_VM)) == 0;
+#endif
+}
+#endif