File-copy from v4.4.100
This is the result of 'cp' from a linux-stable tree with the 'v4.4.100'
tag checked out (commit 26d6298789e695c9f627ce49a7bbd2286405798a) on
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Please refer to that tree for all history prior to this point.
Change-Id: I8a9ee2aea93cd29c52c847d0ce33091a73ae6afe
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
new file mode 100644
index 0000000..a43b2ea
--- /dev/null
+++ b/arch/x86/lguest/boot.c
@@ -0,0 +1,1588 @@
+/*P:010
+ * A hypervisor allows multiple Operating Systems to run on a single machine.
+ * To quote David Wheeler: "Any problem in computer science can be solved with
+ * another layer of indirection."
+ *
+ * We keep things simple in two ways. First, we start with a normal Linux
+ * kernel and insert a module (lg.ko) which allows us to run other Linux
+ * kernels the same way we'd run processes. We call the first kernel the Host,
+ * and the others the Guests. The program which sets up and configures Guests
+ * (such as the example in tools/lguest/lguest.c) is called the Launcher.
+ *
+ * Secondly, we only run specially modified Guests, not normal kernels: setting
+ * CONFIG_LGUEST_GUEST to "y" compiles this file into the kernel so it knows
+ * how to be a Guest at boot time. This means that you can use the same kernel
+ * you boot normally (ie. as a Host) as a Guest.
+ *
+ * These Guests know that they cannot do privileged operations, such as disable
+ * interrupts, and that they have to ask the Host to do such things explicitly.
+ * This file consists of all the replacements for such low-level native
+ * hardware operations: these special Guest versions call the Host.
+ *
+ * So how does the kernel know it's a Guest? We'll see that later, but let's
+ * just say that we end up here where we replace the native functions various
+ * "paravirt" structures with our Guest versions, then boot like normal.
+:*/
+
+/*
+ * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/start_kernel.h>
+#include <linux/string.h>
+#include <linux/console.h>
+#include <linux/screen_info.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/lguest.h>
+#include <linux/lguest_launcher.h>
+#include <linux/virtio_console.h>
+#include <linux/pm.h>
+#include <linux/export.h>
+#include <linux/pci.h>
+#include <linux/virtio_pci.h>
+#include <asm/acpi.h>
+#include <asm/apic.h>
+#include <asm/lguest.h>
+#include <asm/paravirt.h>
+#include <asm/param.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+#include <asm/setup.h>
+#include <asm/e820.h>
+#include <asm/mce.h>
+#include <asm/io.h>
+#include <asm/fpu/api.h>
+#include <asm/stackprotector.h>
+#include <asm/reboot.h> /* for struct machine_ops */
+#include <asm/kvm_para.h>
+#include <asm/pci_x86.h>
+#include <asm/pci-direct.h>
+
+/*G:010
+ * Welcome to the Guest!
+ *
+ * The Guest in our tale is a simple creature: identical to the Host but
+ * behaving in simplified but equivalent ways. In particular, the Guest is the
+ * same kernel as the Host (or at least, built from the same source code).
+:*/
+
+struct lguest_data lguest_data = {
+ .hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF },
+ .noirq_iret = (u32)lguest_noirq_iret,
+ .kernel_address = PAGE_OFFSET,
+ .blocked_interrupts = { 1 }, /* Block timer interrupts */
+ .syscall_vec = IA32_SYSCALL_VECTOR,
+};
+
+/*G:037
+ * async_hcall() is pretty simple: I'm quite proud of it really. We have a
+ * ring buffer of stored hypercalls which the Host will run though next time we
+ * do a normal hypercall. Each entry in the ring has 5 slots for the hypercall
+ * arguments, and a "hcall_status" word which is 0 if the call is ready to go,
+ * and 255 once the Host has finished with it.
+ *
+ * If we come around to a slot which hasn't been finished, then the table is
+ * full and we just make the hypercall directly. This has the nice side
+ * effect of causing the Host to run all the stored calls in the ring buffer
+ * which empties it for next time!
+ */
+static void async_hcall(unsigned long call, unsigned long arg1,
+ unsigned long arg2, unsigned long arg3,
+ unsigned long arg4)
+{
+ /* Note: This code assumes we're uniprocessor. */
+ static unsigned int next_call;
+ unsigned long flags;
+
+ /*
+ * Disable interrupts if not already disabled: we don't want an
+ * interrupt handler making a hypercall while we're already doing
+ * one!
+ */
+ local_irq_save(flags);
+ if (lguest_data.hcall_status[next_call] != 0xFF) {
+ /* Table full, so do normal hcall which will flush table. */
+ hcall(call, arg1, arg2, arg3, arg4);
+ } else {
+ lguest_data.hcalls[next_call].arg0 = call;
+ lguest_data.hcalls[next_call].arg1 = arg1;
+ lguest_data.hcalls[next_call].arg2 = arg2;
+ lguest_data.hcalls[next_call].arg3 = arg3;
+ lguest_data.hcalls[next_call].arg4 = arg4;
+ /* Arguments must all be written before we mark it to go */
+ wmb();
+ lguest_data.hcall_status[next_call] = 0;
+ if (++next_call == LHCALL_RING_SIZE)
+ next_call = 0;
+ }
+ local_irq_restore(flags);
+}
+
+/*G:035
+ * Notice the lazy_hcall() above, rather than hcall(). This is our first real
+ * optimization trick!
+ *
+ * When lazy_mode is set, it means we're allowed to defer all hypercalls and do
+ * them as a batch when lazy_mode is eventually turned off. Because hypercalls
+ * are reasonably expensive, batching them up makes sense. For example, a
+ * large munmap might update dozens of page table entries: that code calls
+ * paravirt_enter_lazy_mmu(), does the dozen updates, then calls
+ * lguest_leave_lazy_mode().
+ *
+ * So, when we're in lazy mode, we call async_hcall() to store the call for
+ * future processing:
+ */
+static void lazy_hcall1(unsigned long call, unsigned long arg1)
+{
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+ hcall(call, arg1, 0, 0, 0);
+ else
+ async_hcall(call, arg1, 0, 0, 0);
+}
+
+/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/
+static void lazy_hcall2(unsigned long call,
+ unsigned long arg1,
+ unsigned long arg2)
+{
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+ hcall(call, arg1, arg2, 0, 0);
+ else
+ async_hcall(call, arg1, arg2, 0, 0);
+}
+
+static void lazy_hcall3(unsigned long call,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3)
+{
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+ hcall(call, arg1, arg2, arg3, 0);
+ else
+ async_hcall(call, arg1, arg2, arg3, 0);
+}
+
+#ifdef CONFIG_X86_PAE
+static void lazy_hcall4(unsigned long call,
+ unsigned long arg1,
+ unsigned long arg2,
+ unsigned long arg3,
+ unsigned long arg4)
+{
+ if (paravirt_get_lazy_mode() == PARAVIRT_LAZY_NONE)
+ hcall(call, arg1, arg2, arg3, arg4);
+ else
+ async_hcall(call, arg1, arg2, arg3, arg4);
+}
+#endif
+
+/*G:036
+ * When lazy mode is turned off, we issue the do-nothing hypercall to
+ * flush any stored calls, and call the generic helper to reset the
+ * per-cpu lazy mode variable.
+ */
+static void lguest_leave_lazy_mmu_mode(void)
+{
+ hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0, 0);
+ paravirt_leave_lazy_mmu();
+}
+
+/*
+ * We also catch the end of context switch; we enter lazy mode for much of
+ * that too, so again we need to flush here.
+ *
+ * (Technically, this is lazy CPU mode, and normally we're in lazy MMU
+ * mode, but unlike Xen, lguest doesn't care about the difference).
+ */
+static void lguest_end_context_switch(struct task_struct *next)
+{
+ hcall(LHCALL_FLUSH_ASYNC, 0, 0, 0, 0);
+ paravirt_end_context_switch(next);
+}
+
+/*G:032
+ * After that diversion we return to our first native-instruction
+ * replacements: four functions for interrupt control.
+ *
+ * The simplest way of implementing these would be to have "turn interrupts
+ * off" and "turn interrupts on" hypercalls. Unfortunately, this is too slow:
+ * these are by far the most commonly called functions of those we override.
+ *
+ * So instead we keep an "irq_enabled" field inside our "struct lguest_data",
+ * which the Guest can update with a single instruction. The Host knows to
+ * check there before it tries to deliver an interrupt.
+ */
+
+/*
+ * save_flags() is expected to return the processor state (ie. "flags"). The
+ * flags word contains all kind of stuff, but in practice Linux only cares
+ * about the interrupt flag. Our "save_flags()" just returns that.
+ */
+asmlinkage __visible unsigned long lguest_save_fl(void)
+{
+ return lguest_data.irq_enabled;
+}
+
+/* Interrupts go off... */
+asmlinkage __visible void lguest_irq_disable(void)
+{
+ lguest_data.irq_enabled = 0;
+}
+
+/*
+ * Let's pause a moment. Remember how I said these are called so often?
+ * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
+ * break some rules. In particular, these functions are assumed to save their
+ * own registers if they need to: normal C functions assume they can trash the
+ * eax register. To use normal C functions, we use
+ * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
+ * C function, then restores it.
+ */
+PV_CALLEE_SAVE_REGS_THUNK(lguest_save_fl);
+PV_CALLEE_SAVE_REGS_THUNK(lguest_irq_disable);
+/*:*/
+
+/* These are in head_32.S */
+extern void lg_irq_enable(void);
+extern void lg_restore_fl(unsigned long flags);
+
+/*M:003
+ * We could be more efficient in our checking of outstanding interrupts, rather
+ * than using a branch. One way would be to put the "irq_enabled" field in a
+ * page by itself, and have the Host write-protect it when an interrupt comes
+ * in when irqs are disabled. There will then be a page fault as soon as
+ * interrupts are re-enabled.
+ *
+ * A better method is to implement soft interrupt disable generally for x86:
+ * instead of disabling interrupts, we set a flag. If an interrupt does come
+ * in, we then disable them for real. This is uncommon, so we could simply use
+ * a hypercall for interrupt control and not worry about efficiency.
+:*/
+
+/*G:034
+ * The Interrupt Descriptor Table (IDT).
+ *
+ * The IDT tells the processor what to do when an interrupt comes in. Each
+ * entry in the table is a 64-bit descriptor: this holds the privilege level,
+ * address of the handler, and... well, who cares? The Guest just asks the
+ * Host to make the change anyway, because the Host controls the real IDT.
+ */
+static void lguest_write_idt_entry(gate_desc *dt,
+ int entrynum, const gate_desc *g)
+{
+ /*
+ * The gate_desc structure is 8 bytes long: we hand it to the Host in
+ * two 32-bit chunks. The whole 32-bit kernel used to hand descriptors
+ * around like this; typesafety wasn't a big concern in Linux's early
+ * years.
+ */
+ u32 *desc = (u32 *)g;
+ /* Keep the local copy up to date. */
+ native_write_idt_entry(dt, entrynum, g);
+ /* Tell Host about this new entry. */
+ hcall(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1], 0);
+}
+
+/*
+ * Changing to a different IDT is very rare: we keep the IDT up-to-date every
+ * time it is written, so we can simply loop through all entries and tell the
+ * Host about them.
+ */
+static void lguest_load_idt(const struct desc_ptr *desc)
+{
+ unsigned int i;
+ struct desc_struct *idt = (void *)desc->address;
+
+ for (i = 0; i < (desc->size+1)/8; i++)
+ hcall(LHCALL_LOAD_IDT_ENTRY, i, idt[i].a, idt[i].b, 0);
+}
+
+/*
+ * The Global Descriptor Table.
+ *
+ * The Intel architecture defines another table, called the Global Descriptor
+ * Table (GDT). You tell the CPU where it is (and its size) using the "lgdt"
+ * instruction, and then several other instructions refer to entries in the
+ * table. There are three entries which the Switcher needs, so the Host simply
+ * controls the entire thing and the Guest asks it to make changes using the
+ * LOAD_GDT hypercall.
+ *
+ * This is the exactly like the IDT code.
+ */
+static void lguest_load_gdt(const struct desc_ptr *desc)
+{
+ unsigned int i;
+ struct desc_struct *gdt = (void *)desc->address;
+
+ for (i = 0; i < (desc->size+1)/8; i++)
+ hcall(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b, 0);
+}
+
+/*
+ * For a single GDT entry which changes, we simply change our copy and
+ * then tell the host about it.
+ */
+static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
+ const void *desc, int type)
+{
+ native_write_gdt_entry(dt, entrynum, desc, type);
+ /* Tell Host about this new entry. */
+ hcall(LHCALL_LOAD_GDT_ENTRY, entrynum,
+ dt[entrynum].a, dt[entrynum].b, 0);
+}
+
+/*
+ * There are three "thread local storage" GDT entries which change
+ * on every context switch (these three entries are how glibc implements
+ * __thread variables). As an optimization, we have a hypercall
+ * specifically for this case.
+ *
+ * Wouldn't it be nicer to have a general LOAD_GDT_ENTRIES hypercall
+ * which took a range of entries?
+ */
+static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
+{
+ /*
+ * There's one problem which normal hardware doesn't have: the Host
+ * can't handle us removing entries we're currently using. So we clear
+ * the GS register here: if it's needed it'll be reloaded anyway.
+ */
+ lazy_load_gs(0);
+ lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu);
+}
+
+/*G:038
+ * That's enough excitement for now, back to ploughing through each of the
+ * different pv_ops structures (we're about 1/3 of the way through).
+ *
+ * This is the Local Descriptor Table, another weird Intel thingy. Linux only
+ * uses this for some strange applications like Wine. We don't do anything
+ * here, so they'll get an informative and friendly Segmentation Fault.
+ */
+static void lguest_set_ldt(const void *addr, unsigned entries)
+{
+}
+
+/*
+ * This loads a GDT entry into the "Task Register": that entry points to a
+ * structure called the Task State Segment. Some comments scattered though the
+ * kernel code indicate that this used for task switching in ages past, along
+ * with blood sacrifice and astrology.
+ *
+ * Now there's nothing interesting in here that we don't get told elsewhere.
+ * But the native version uses the "ltr" instruction, which makes the Host
+ * complain to the Guest about a Segmentation Fault and it'll oops. So we
+ * override the native version with a do-nothing version.
+ */
+static void lguest_load_tr_desc(void)
+{
+}
+
+/*
+ * The "cpuid" instruction is a way of querying both the CPU identity
+ * (manufacturer, model, etc) and its features. It was introduced before the
+ * Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
+ * As you might imagine, after a decade and a half this treatment, it is now a
+ * giant ball of hair. Its entry in the current Intel manual runs to 28 pages.
+ *
+ * This instruction even it has its own Wikipedia entry. The Wikipedia entry
+ * has been translated into 6 languages. I am not making this up!
+ *
+ * We could get funky here and identify ourselves as "GenuineLguest", but
+ * instead we just use the real "cpuid" instruction. Then I pretty much turned
+ * off feature bits until the Guest booted. (Don't say that: you'll damage
+ * lguest sales!) Shut up, inner voice! (Hey, just pointing out that this is
+ * hardly future proof.) No one's listening! They don't like you anyway,
+ * parenthetic weirdo!
+ *
+ * Replacing the cpuid so we can turn features off is great for the kernel, but
+ * anyone (including userspace) can just use the raw "cpuid" instruction and
+ * the Host won't even notice since it isn't privileged. So we try not to get
+ * too worked up about it.
+ */
+static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
+ unsigned int *cx, unsigned int *dx)
+{
+ int function = *ax;
+
+ native_cpuid(ax, bx, cx, dx);
+ switch (function) {
+ /*
+ * CPUID 0 gives the highest legal CPUID number (and the ID string).
+ * We futureproof our code a little by sticking to known CPUID values.
+ */
+ case 0:
+ if (*ax > 5)
+ *ax = 5;
+ break;
+
+ /*
+ * CPUID 1 is a basic feature request.
+ *
+ * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3
+ * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE.
+ */
+ case 1:
+ *cx &= 0x00002201;
+ *dx &= 0x07808151;
+ /*
+ * The Host can do a nice optimization if it knows that the
+ * kernel mappings (addresses above 0xC0000000 or whatever
+ * PAGE_OFFSET is set to) haven't changed. But Linux calls
+ * flush_tlb_user() for both user and kernel mappings unless
+ * the Page Global Enable (PGE) feature bit is set.
+ */
+ *dx |= 0x00002000;
+ /*
+ * We also lie, and say we're family id 5. 6 or greater
+ * leads to a rdmsr in early_init_intel which we can't handle.
+ * Family ID is returned as bits 8-12 in ax.
+ */
+ *ax &= 0xFFFFF0FF;
+ *ax |= 0x00000500;
+ break;
+
+ /*
+ * This is used to detect if we're running under KVM. We might be,
+ * but that's a Host matter, not us. So say we're not.
+ */
+ case KVM_CPUID_SIGNATURE:
+ *bx = *cx = *dx = 0;
+ break;
+
+ /*
+ * 0x80000000 returns the highest Extended Function, so we futureproof
+ * like we do above by limiting it to known fields.
+ */
+ case 0x80000000:
+ if (*ax > 0x80000008)
+ *ax = 0x80000008;
+ break;
+
+ /*
+ * PAE systems can mark pages as non-executable. Linux calls this the
+ * NX bit. Intel calls it XD (eXecute Disable), AMD EVP (Enhanced
+ * Virus Protection). We just switch it off here, since we don't
+ * support it.
+ */
+ case 0x80000001:
+ *dx &= ~(1 << 20);
+ break;
+ }
+}
+
+/*
+ * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
+ * I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother
+ * it. The Host needs to know when the Guest wants to change them, so we have
+ * a whole series of functions like read_cr0() and write_cr0().
+ *
+ * We start with cr0. cr0 allows you to turn on and off all kinds of basic
+ * features, but Linux only really cares about one: the horrifically-named Task
+ * Switched (TS) bit at bit 3 (ie. 8)
+ *
+ * What does the TS bit do? Well, it causes the CPU to trap (interrupt 7) if
+ * the floating point unit is used. Which allows us to restore FPU state
+ * lazily after a task switch, and Linux uses that gratefully, but wouldn't a
+ * name like "FPUTRAP bit" be a little less cryptic?
+ *
+ * We store cr0 locally because the Host never changes it. The Guest sometimes
+ * wants to read it and we'd prefer not to bother the Host unnecessarily.
+ */
+static unsigned long current_cr0;
+static void lguest_write_cr0(unsigned long val)
+{
+ lazy_hcall1(LHCALL_TS, val & X86_CR0_TS);
+ current_cr0 = val;
+}
+
+static unsigned long lguest_read_cr0(void)
+{
+ return current_cr0;
+}
+
+/*
+ * Intel provided a special instruction to clear the TS bit for people too cool
+ * to use write_cr0() to do it. This "clts" instruction is faster, because all
+ * the vowels have been optimized out.
+ */
+static void lguest_clts(void)
+{
+ lazy_hcall1(LHCALL_TS, 0);
+ current_cr0 &= ~X86_CR0_TS;
+}
+
+/*
+ * cr2 is the virtual address of the last page fault, which the Guest only ever
+ * reads. The Host kindly writes this into our "struct lguest_data", so we
+ * just read it out of there.
+ */
+static unsigned long lguest_read_cr2(void)
+{
+ return lguest_data.cr2;
+}
+
+/* See lguest_set_pte() below. */
+static bool cr3_changed = false;
+static unsigned long current_cr3;
+
+/*
+ * cr3 is the current toplevel pagetable page: the principle is the same as
+ * cr0. Keep a local copy, and tell the Host when it changes.
+ */
+static void lguest_write_cr3(unsigned long cr3)
+{
+ lazy_hcall1(LHCALL_NEW_PGTABLE, cr3);
+ current_cr3 = cr3;
+
+ /* These two page tables are simple, linear, and used during boot */
+ if (cr3 != __pa_symbol(swapper_pg_dir) &&
+ cr3 != __pa_symbol(initial_page_table))
+ cr3_changed = true;
+}
+
+static unsigned long lguest_read_cr3(void)
+{
+ return current_cr3;
+}
+
+/* cr4 is used to enable and disable PGE, but we don't care. */
+static unsigned long lguest_read_cr4(void)
+{
+ return 0;
+}
+
+static void lguest_write_cr4(unsigned long val)
+{
+}
+
+/*
+ * Page Table Handling.
+ *
+ * Now would be a good time to take a rest and grab a coffee or similarly
+ * relaxing stimulant. The easy parts are behind us, and the trek gradually
+ * winds uphill from here.
+ *
+ * Quick refresher: memory is divided into "pages" of 4096 bytes each. The CPU
+ * maps virtual addresses to physical addresses using "page tables". We could
+ * use one huge index of 1 million entries: each address is 4 bytes, so that's
+ * 1024 pages just to hold the page tables. But since most virtual addresses
+ * are unused, we use a two level index which saves space. The cr3 register
+ * contains the physical address of the top level "page directory" page, which
+ * contains physical addresses of up to 1024 second-level pages. Each of these
+ * second level pages contains up to 1024 physical addresses of actual pages,
+ * or Page Table Entries (PTEs).
+ *
+ * Here's a diagram, where arrows indicate physical addresses:
+ *
+ * cr3 ---> +---------+
+ * | --------->+---------+
+ * | | | PADDR1 |
+ * Mid-level | | PADDR2 |
+ * (PMD) page | | |
+ * | | Lower-level |
+ * | | (PTE) page |
+ * | | | |
+ * .... ....
+ *
+ * So to convert a virtual address to a physical address, we look up the top
+ * level, which points us to the second level, which gives us the physical
+ * address of that page. If the top level entry was not present, or the second
+ * level entry was not present, then the virtual address is invalid (we
+ * say "the page was not mapped").
+ *
+ * Put another way, a 32-bit virtual address is divided up like so:
+ *
+ * 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ * |<---- 10 bits ---->|<---- 10 bits ---->|<------ 12 bits ------>|
+ * Index into top Index into second Offset within page
+ * page directory page pagetable page
+ *
+ * Now, unfortunately, this isn't the whole story: Intel added Physical Address
+ * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits).
+ * These are held in 64-bit page table entries, so we can now only fit 512
+ * entries in a page, and the neat three-level tree breaks down.
+ *
+ * The result is a four level page table:
+ *
+ * cr3 --> [ 4 Upper ]
+ * [ Level ]
+ * [ Entries ]
+ * [(PUD Page)]---> +---------+
+ * | --------->+---------+
+ * | | | PADDR1 |
+ * Mid-level | | PADDR2 |
+ * (PMD) page | | |
+ * | | Lower-level |
+ * | | (PTE) page |
+ * | | | |
+ * .... ....
+ *
+ *
+ * And the virtual address is decoded as:
+ *
+ * 1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ * |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>|
+ * Index into Index into mid Index into lower Offset within page
+ * top entries directory page pagetable page
+ *
+ * It's too hard to switch between these two formats at runtime, so Linux only
+ * supports one or the other depending on whether CONFIG_X86_PAE is set. Many
+ * distributions turn it on, and not just for people with silly amounts of
+ * memory: the larger PTE entries allow room for the NX bit, which lets the
+ * kernel disable execution of pages and increase security.
+ *
+ * This was a problem for lguest, which couldn't run on these distributions;
+ * then Matias Zabaljauregui figured it all out and implemented it, and only a
+ * handful of puppies were crushed in the process!
+ *
+ * Back to our point: the kernel spends a lot of time changing both the
+ * top-level page directory and lower-level pagetable pages. The Guest doesn't
+ * know physical addresses, so while it maintains these page tables exactly
+ * like normal, it also needs to keep the Host informed whenever it makes a
+ * change: the Host will create the real page tables based on the Guests'.
+ */
+
+/*
+ * The Guest calls this after it has set a second-level entry (pte), ie. to map
+ * a page into a process' address space. We tell the Host the toplevel and
+ * address this corresponds to. The Guest uses one pagetable per process, so
+ * we need to tell the Host which one we're changing (mm->pgd).
+ */
+static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+#ifdef CONFIG_X86_PAE
+ /* PAE needs to hand a 64 bit page table entry, so it uses two args. */
+ lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
+ ptep->pte_low, ptep->pte_high);
+#else
+ lazy_hcall3(LHCALL_SET_PTE, __pa(mm->pgd), addr, ptep->pte_low);
+#endif
+}
+
+/* This is the "set and update" combo-meal-deal version. */
+static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pteval)
+{
+ native_set_pte(ptep, pteval);
+ lguest_pte_update(mm, addr, ptep);
+}
+
+/*
+ * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+ * to set a middle-level entry when PAE is activated.
+ *
+ * Again, we set the entry then tell the Host which page we changed,
+ * and the index of the entry we changed.
+ */
+#ifdef CONFIG_X86_PAE
+static void lguest_set_pud(pud_t *pudp, pud_t pudval)
+{
+ native_set_pud(pudp, pudval);
+
+ /* 32 bytes aligned pdpt address and the index. */
+ lazy_hcall2(LHCALL_SET_PGD, __pa(pudp) & 0xFFFFFFE0,
+ (__pa(pudp) & 0x1F) / sizeof(pud_t));
+}
+
+static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
+{
+ native_set_pmd(pmdp, pmdval);
+ lazy_hcall2(LHCALL_SET_PMD, __pa(pmdp) & PAGE_MASK,
+ (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
+}
+#else
+
+/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */
+static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
+{
+ native_set_pmd(pmdp, pmdval);
+ lazy_hcall2(LHCALL_SET_PGD, __pa(pmdp) & PAGE_MASK,
+ (__pa(pmdp) & (PAGE_SIZE - 1)) / sizeof(pmd_t));
+}
+#endif
+
+/*
+ * There are a couple of legacy places where the kernel sets a PTE, but we
+ * don't know the top level any more. This is useless for us, since we don't
+ * know which pagetable is changing or what address, so we just tell the Host
+ * to forget all of them. Fortunately, this is very rare.
+ *
+ * ... except in early boot when the kernel sets up the initial pagetables,
+ * which makes booting astonishingly slow: 48 seconds! So we don't even tell
+ * the Host anything changed until we've done the first real page table switch,
+ * which brings boot back to 4.3 seconds.
+ */
+static void lguest_set_pte(pte_t *ptep, pte_t pteval)
+{
+ native_set_pte(ptep, pteval);
+ if (cr3_changed)
+ lazy_hcall1(LHCALL_FLUSH_TLB, 1);
+}
+
+#ifdef CONFIG_X86_PAE
+/*
+ * With 64-bit PTE values, we need to be careful setting them: if we set 32
+ * bits at a time, the hardware could see a weird half-set entry. These
+ * versions ensure we update all 64 bits at once.
+ */
+static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
+{
+ native_set_pte_atomic(ptep, pte);
+ if (cr3_changed)
+ lazy_hcall1(LHCALL_FLUSH_TLB, 1);
+}
+
+static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep)
+{
+ native_pte_clear(mm, addr, ptep);
+ lguest_pte_update(mm, addr, ptep);
+}
+
+static void lguest_pmd_clear(pmd_t *pmdp)
+{
+ lguest_set_pmd(pmdp, __pmd(0));
+}
+#endif
+
+/*
+ * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
+ * native page table operations. On native hardware you can set a new page
+ * table entry whenever you want, but if you want to remove one you have to do
+ * a TLB flush (a TLB is a little cache of page table entries kept by the CPU).
+ *
+ * So the lguest_set_pte_at() and lguest_set_pmd() functions above are only
+ * called when a valid entry is written, not when it's removed (ie. marked not
+ * present). Instead, this is where we come when the Guest wants to remove a
+ * page table entry: we tell the Host to set that entry to 0 (ie. the present
+ * bit is zero).
+ */
+static void lguest_flush_tlb_single(unsigned long addr)
+{
+ /* Simply set it to zero: if it was not, it will fault back in. */
+ lazy_hcall3(LHCALL_SET_PTE, current_cr3, addr, 0);
+}
+
+/*
+ * This is what happens after the Guest has removed a large number of entries.
+ * This tells the Host that any of the page table entries for userspace might
+ * have changed, ie. virtual addresses below PAGE_OFFSET.
+ */
+static void lguest_flush_tlb_user(void)
+{
+ lazy_hcall1(LHCALL_FLUSH_TLB, 0);
+}
+
+/*
+ * This is called when the kernel page tables have changed. That's not very
+ * common (unless the Guest is using highmem, which makes the Guest extremely
+ * slow), so it's worth separating this from the user flushing above.
+ */
+static void lguest_flush_tlb_kernel(void)
+{
+ lazy_hcall1(LHCALL_FLUSH_TLB, 1);
+}
+
+/*
+ * The Unadvanced Programmable Interrupt Controller.
+ *
+ * This is an attempt to implement the simplest possible interrupt controller.
+ * I spent some time looking though routines like set_irq_chip_and_handler,
+ * set_irq_chip_and_handler_name, set_irq_chip_data and set_phasers_to_stun and
+ * I *think* this is as simple as it gets.
+ *
+ * We can tell the Host what interrupts we want blocked ready for using the
+ * lguest_data.interrupts bitmap, so disabling (aka "masking") them is as
+ * simple as setting a bit. We don't actually "ack" interrupts as such, we
+ * just mask and unmask them. I wonder if we should be cleverer?
+ */
+static void disable_lguest_irq(struct irq_data *data)
+{
+ set_bit(data->irq, lguest_data.blocked_interrupts);
+}
+
+static void enable_lguest_irq(struct irq_data *data)
+{
+ clear_bit(data->irq, lguest_data.blocked_interrupts);
+}
+
+/* This structure describes the lguest IRQ controller. */
+static struct irq_chip lguest_irq_controller = {
+ .name = "lguest",
+ .irq_mask = disable_lguest_irq,
+ .irq_mask_ack = disable_lguest_irq,
+ .irq_unmask = enable_lguest_irq,
+};
+
+/*
+ * Interrupt descriptors are allocated as-needed, but low-numbered ones are
+ * reserved by the generic x86 code. So we ignore irq_alloc_desc_at if it
+ * tells us the irq is already used: other errors (ie. ENOMEM) we take
+ * seriously.
+ */
+static int lguest_setup_irq(unsigned int irq)
+{
+ struct irq_desc *desc;
+ int err;
+
+ /* Returns -ve error or vector number. */
+ err = irq_alloc_desc_at(irq, 0);
+ if (err < 0 && err != -EEXIST)
+ return err;
+
+ /*
+ * Tell the Linux infrastructure that the interrupt is
+ * controlled by our level-based lguest interrupt controller.
+ */
+ irq_set_chip_and_handler_name(irq, &lguest_irq_controller,
+ handle_level_irq, "level");
+
+ /* Some systems map "vectors" to interrupts weirdly. Not us! */
+ desc = irq_to_desc(irq);
+ __this_cpu_write(vector_irq[FIRST_EXTERNAL_VECTOR + irq], desc);
+ return 0;
+}
+
+static int lguest_enable_irq(struct pci_dev *dev)
+{
+ int err;
+ u8 line = 0;
+
+ /* We literally use the PCI interrupt line as the irq number. */
+ pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &line);
+ err = lguest_setup_irq(line);
+ if (!err)
+ dev->irq = line;
+ return err;
+}
+
+/* We don't do hotplug PCI, so this shouldn't be called. */
+static void lguest_disable_irq(struct pci_dev *dev)
+{
+ WARN_ON(1);
+}
+
+/*
+ * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
+ * interrupt (except 128, which is used for system calls).
+ */
+static void __init lguest_init_IRQ(void)
+{
+ unsigned int i;
+
+ for (i = FIRST_EXTERNAL_VECTOR; i < FIRST_SYSTEM_VECTOR; i++) {
+ if (i != IA32_SYSCALL_VECTOR)
+ set_intr_gate(i, irq_entries_start +
+ 8 * (i - FIRST_EXTERNAL_VECTOR));
+ }
+
+ /*
+ * This call is required to set up for 4k stacks, where we have
+ * separate stacks for hard and soft interrupts.
+ */
+ irq_ctx_init(smp_processor_id());
+}
+
+/*
+ * Time.
+ *
+ * It would be far better for everyone if the Guest had its own clock, but
+ * until then the Host gives us the time on every interrupt.
+ */
+static void lguest_get_wallclock(struct timespec *now)
+{
+ *now = lguest_data.time;
+}
+
+/*
+ * The TSC is an Intel thing called the Time Stamp Counter. The Host tells us
+ * what speed it runs at, or 0 if it's unusable as a reliable clock source.
+ * This matches what we want here: if we return 0 from this function, the x86
+ * TSC clock will give up and not register itself.
+ */
+static unsigned long lguest_tsc_khz(void)
+{
+ return lguest_data.tsc_khz;
+}
+
+/*
+ * If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host.
+ */
+static cycle_t lguest_clock_read(struct clocksource *cs)
+{
+ unsigned long sec, nsec;
+
+ /*
+ * Since the time is in two parts (seconds and nanoseconds), we risk
+ * reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
+ * and getting 99 and 0. As Linux tends to come apart under the stress
+ * of time travel, we must be careful:
+ */
+ do {
+ /* First we read the seconds part. */
+ sec = lguest_data.time.tv_sec;
+ /*
+ * This read memory barrier tells the compiler and the CPU that
+ * this can't be reordered: we have to complete the above
+ * before going on.
+ */
+ rmb();
+ /* Now we read the nanoseconds part. */
+ nsec = lguest_data.time.tv_nsec;
+ /* Make sure we've done that. */
+ rmb();
+ /* Now if the seconds part has changed, try again. */
+ } while (unlikely(lguest_data.time.tv_sec != sec));
+
+ /* Our lguest clock is in real nanoseconds. */
+ return sec*1000000000ULL + nsec;
+}
+
+/* This is the fallback clocksource: lower priority than the TSC clocksource. */
+static struct clocksource lguest_clock = {
+ .name = "lguest",
+ .rating = 200,
+ .read = lguest_clock_read,
+ .mask = CLOCKSOURCE_MASK(64),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+};
+
+/*
+ * We also need a "struct clock_event_device": Linux asks us to set it to go
+ * off some time in the future. Actually, James Morris figured all this out, I
+ * just applied the patch.
+ */
+static int lguest_clockevent_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ /* FIXME: I don't think this can ever happen, but James tells me he had
+ * to put this code in. Maybe we should remove it now. Anyone? */
+ if (delta < LG_CLOCK_MIN_DELTA) {
+ if (printk_ratelimit())
+ printk(KERN_DEBUG "%s: small delta %lu ns\n",
+ __func__, delta);
+ return -ETIME;
+ }
+
+ /* Please wake us this far in the future. */
+ hcall(LHCALL_SET_CLOCKEVENT, delta, 0, 0, 0);
+ return 0;
+}
+
+static int lguest_clockevent_shutdown(struct clock_event_device *evt)
+{
+ /* A 0 argument shuts the clock down. */
+ hcall(LHCALL_SET_CLOCKEVENT, 0, 0, 0, 0);
+ return 0;
+}
+
+/* This describes our primitive timer chip. */
+static struct clock_event_device lguest_clockevent = {
+ .name = "lguest",
+ .features = CLOCK_EVT_FEAT_ONESHOT,
+ .set_next_event = lguest_clockevent_set_next_event,
+ .set_state_shutdown = lguest_clockevent_shutdown,
+ .rating = INT_MAX,
+ .mult = 1,
+ .shift = 0,
+ .min_delta_ns = LG_CLOCK_MIN_DELTA,
+ .max_delta_ns = LG_CLOCK_MAX_DELTA,
+};
+
+/*
+ * This is the Guest timer interrupt handler (hardware interrupt 0). We just
+ * call the clockevent infrastructure and it does whatever needs doing.
+ */
+static void lguest_time_irq(struct irq_desc *desc)
+{
+ unsigned long flags;
+
+ /* Don't interrupt us while this is running. */
+ local_irq_save(flags);
+ lguest_clockevent.event_handler(&lguest_clockevent);
+ local_irq_restore(flags);
+}
+
+/*
+ * At some point in the boot process, we get asked to set up our timing
+ * infrastructure. The kernel doesn't expect timer interrupts before this, but
+ * we cleverly initialized the "blocked_interrupts" field of "struct
+ * lguest_data" so that timer interrupts were blocked until now.
+ */
+static void lguest_time_init(void)
+{
+ /* Set up the timer interrupt (0) to go to our simple timer routine */
+ if (lguest_setup_irq(0) != 0)
+ panic("Could not set up timer irq");
+ irq_set_handler(0, lguest_time_irq);
+
+ clocksource_register_hz(&lguest_clock, NSEC_PER_SEC);
+
+ /* We can't set cpumask in the initializer: damn C limitations! Set it
+ * here and register our timer device. */
+ lguest_clockevent.cpumask = cpumask_of(0);
+ clockevents_register_device(&lguest_clockevent);
+
+ /* Finally, we unblock the timer interrupt. */
+ clear_bit(0, lguest_data.blocked_interrupts);
+}
+
+/*
+ * Miscellaneous bits and pieces.
+ *
+ * Here is an oddball collection of functions which the Guest needs for things
+ * to work. They're pretty simple.
+ */
+
+/*
+ * The Guest needs to tell the Host what stack it expects traps to use. For
+ * native hardware, this is part of the Task State Segment mentioned above in
+ * lguest_load_tr_desc(), but to help hypervisors there's this special call.
+ *
+ * We tell the Host the segment we want to use (__KERNEL_DS is the kernel data
+ * segment), the privilege level (we're privilege level 1, the Host is 0 and
+ * will not tolerate us trying to use that), the stack pointer, and the number
+ * of pages in the stack.
+ */
+static void lguest_load_sp0(struct tss_struct *tss,
+ struct thread_struct *thread)
+{
+ lazy_hcall3(LHCALL_SET_STACK, __KERNEL_DS | 0x1, thread->sp0,
+ THREAD_SIZE / PAGE_SIZE);
+ tss->x86_tss.sp0 = thread->sp0;
+}
+
+/* Let's just say, I wouldn't do debugging under a Guest. */
+static unsigned long lguest_get_debugreg(int regno)
+{
+ /* FIXME: Implement */
+ return 0;
+}
+
+static void lguest_set_debugreg(int regno, unsigned long value)
+{
+ /* FIXME: Implement */
+}
+
+/*
+ * There are times when the kernel wants to make sure that no memory writes are
+ * caught in the cache (that they've all reached real hardware devices). This
+ * doesn't matter for the Guest which has virtual hardware.
+ *
+ * On the Pentium 4 and above, cpuid() indicates that the Cache Line Flush
+ * (clflush) instruction is available and the kernel uses that. Otherwise, it
+ * uses the older "Write Back and Invalidate Cache" (wbinvd) instruction.
+ * Unlike clflush, wbinvd can only be run at privilege level 0. So we can
+ * ignore clflush, but replace wbinvd.
+ */
+static void lguest_wbinvd(void)
+{
+}
+
+/*
+ * If the Guest expects to have an Advanced Programmable Interrupt Controller,
+ * we play dumb by ignoring writes and returning 0 for reads. So it's no
+ * longer Programmable nor Controlling anything, and I don't think 8 lines of
+ * code qualifies for Advanced. It will also never interrupt anything. It
+ * does, however, allow us to get through the Linux boot code.
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+static void lguest_apic_write(u32 reg, u32 v)
+{
+}
+
+static u32 lguest_apic_read(u32 reg)
+{
+ return 0;
+}
+
+static u64 lguest_apic_icr_read(void)
+{
+ return 0;
+}
+
+static void lguest_apic_icr_write(u32 low, u32 id)
+{
+ /* Warn to see if there's any stray references */
+ WARN_ON(1);
+}
+
+static void lguest_apic_wait_icr_idle(void)
+{
+ return;
+}
+
+static u32 lguest_apic_safe_wait_icr_idle(void)
+{
+ return 0;
+}
+
+static void set_lguest_basic_apic_ops(void)
+{
+ apic->read = lguest_apic_read;
+ apic->write = lguest_apic_write;
+ apic->icr_read = lguest_apic_icr_read;
+ apic->icr_write = lguest_apic_icr_write;
+ apic->wait_icr_idle = lguest_apic_wait_icr_idle;
+ apic->safe_wait_icr_idle = lguest_apic_safe_wait_icr_idle;
+};
+#endif
+
+/* STOP! Until an interrupt comes in. */
+static void lguest_safe_halt(void)
+{
+ hcall(LHCALL_HALT, 0, 0, 0, 0);
+}
+
+/*
+ * The SHUTDOWN hypercall takes a string to describe what's happening, and
+ * an argument which says whether this to restart (reboot) the Guest or not.
+ *
+ * Note that the Host always prefers that the Guest speak in physical addresses
+ * rather than virtual addresses, so we use __pa() here.
+ */
+static void lguest_power_off(void)
+{
+ hcall(LHCALL_SHUTDOWN, __pa("Power down"),
+ LGUEST_SHUTDOWN_POWEROFF, 0, 0);
+}
+
+/*
+ * Panicing.
+ *
+ * Don't. But if you did, this is what happens.
+ */
+static int lguest_panic(struct notifier_block *nb, unsigned long l, void *p)
+{
+ hcall(LHCALL_SHUTDOWN, __pa(p), LGUEST_SHUTDOWN_POWEROFF, 0, 0);
+ /* The hcall won't return, but to keep gcc happy, we're "done". */
+ return NOTIFY_DONE;
+}
+
+static struct notifier_block paniced = {
+ .notifier_call = lguest_panic
+};
+
+/* Setting up memory is fairly easy. */
+static __init char *lguest_memory_setup(void)
+{
+ /*
+ * The Linux bootloader header contains an "e820" memory map: the
+ * Launcher populated the first entry with our memory limit.
+ */
+ e820_add_region(boot_params.e820_map[0].addr,
+ boot_params.e820_map[0].size,
+ boot_params.e820_map[0].type);
+
+ /* This string is for the boot messages. */
+ return "LGUEST";
+}
+
+/* Offset within PCI config space of BAR access capability. */
+static int console_cfg_offset = 0;
+static int console_access_cap;
+
+/* Set up so that we access off in bar0 (on bus 0, device 1, function 0) */
+static void set_cfg_window(u32 cfg_offset, u32 off)
+{
+ write_pci_config_byte(0, 1, 0,
+ cfg_offset + offsetof(struct virtio_pci_cap, bar),
+ 0);
+ write_pci_config(0, 1, 0,
+ cfg_offset + offsetof(struct virtio_pci_cap, length),
+ 4);
+ write_pci_config(0, 1, 0,
+ cfg_offset + offsetof(struct virtio_pci_cap, offset),
+ off);
+}
+
+static void write_bar_via_cfg(u32 cfg_offset, u32 off, u32 val)
+{
+ /*
+ * We could set this up once, then leave it; nothing else in the *
+ * kernel should touch these registers. But if it went wrong, that
+ * would be a horrible bug to find.
+ */
+ set_cfg_window(cfg_offset, off);
+ write_pci_config(0, 1, 0,
+ cfg_offset + sizeof(struct virtio_pci_cap), val);
+}
+
+static void probe_pci_console(void)
+{
+ u8 cap, common_cap = 0, device_cap = 0;
+ /* Offset within BAR0 */
+ u32 device_offset;
+ u32 device_len;
+
+ /* Avoid recursive printk into here. */
+ console_cfg_offset = -1;
+
+ if (!early_pci_allowed()) {
+ printk(KERN_ERR "lguest: early PCI access not allowed!\n");
+ return;
+ }
+
+ /* We expect a console PCI device at BUS0, slot 1. */
+ if (read_pci_config(0, 1, 0, 0) != 0x10431AF4) {
+ printk(KERN_ERR "lguest: PCI device is %#x!\n",
+ read_pci_config(0, 1, 0, 0));
+ return;
+ }
+
+ /* Find the capabilities we need (must be in bar0) */
+ cap = read_pci_config_byte(0, 1, 0, PCI_CAPABILITY_LIST);
+ while (cap) {
+ u8 vndr = read_pci_config_byte(0, 1, 0, cap);
+ if (vndr == PCI_CAP_ID_VNDR) {
+ u8 type, bar;
+ u32 offset, length;
+
+ type = read_pci_config_byte(0, 1, 0,
+ cap + offsetof(struct virtio_pci_cap, cfg_type));
+ bar = read_pci_config_byte(0, 1, 0,
+ cap + offsetof(struct virtio_pci_cap, bar));
+ offset = read_pci_config(0, 1, 0,
+ cap + offsetof(struct virtio_pci_cap, offset));
+ length = read_pci_config(0, 1, 0,
+ cap + offsetof(struct virtio_pci_cap, length));
+
+ switch (type) {
+ case VIRTIO_PCI_CAP_DEVICE_CFG:
+ if (bar == 0) {
+ device_cap = cap;
+ device_offset = offset;
+ device_len = length;
+ }
+ break;
+ case VIRTIO_PCI_CAP_PCI_CFG:
+ console_access_cap = cap;
+ break;
+ }
+ }
+ cap = read_pci_config_byte(0, 1, 0, cap + PCI_CAP_LIST_NEXT);
+ }
+ if (!device_cap || !console_access_cap) {
+ printk(KERN_ERR "lguest: No caps (%u/%u/%u) in console!\n",
+ common_cap, device_cap, console_access_cap);
+ return;
+ }
+
+ /*
+ * Note that we can't check features, until we've set the DRIVER
+ * status bit. We don't want to do that until we have a real driver,
+ * so we just check that the device-specific config has room for
+ * emerg_wr. If it doesn't support VIRTIO_CONSOLE_F_EMERG_WRITE
+ * it should ignore the access.
+ */
+ if (device_len < (offsetof(struct virtio_console_config, emerg_wr)
+ + sizeof(u32))) {
+ printk(KERN_ERR "lguest: console missing emerg_wr field\n");
+ return;
+ }
+
+ console_cfg_offset = device_offset;
+ printk(KERN_INFO "lguest: Console via virtio-pci emerg_wr\n");
+}
+
+/*
+ * We will eventually use the virtio console device to produce console output,
+ * but before that is set up we use the virtio PCI console's backdoor mmio
+ * access and the "emergency" write facility (which is legal even before the
+ * device is configured).
+ */
+static __init int early_put_chars(u32 vtermno, const char *buf, int count)
+{
+ /* If we couldn't find PCI console, forget it. */
+ if (console_cfg_offset < 0)
+ return count;
+
+ if (unlikely(!console_cfg_offset)) {
+ probe_pci_console();
+ if (console_cfg_offset < 0)
+ return count;
+ }
+
+ write_bar_via_cfg(console_access_cap,
+ console_cfg_offset
+ + offsetof(struct virtio_console_config, emerg_wr),
+ buf[0]);
+ return 1;
+}
+
+/*
+ * Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us.
+ */
+static void lguest_restart(char *reason)
+{
+ hcall(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART, 0, 0);
+}
+
+/*G:050
+ * Patching (Powerfully Placating Performance Pedants)
+ *
+ * We have already seen that pv_ops structures let us replace simple native
+ * instructions with calls to the appropriate back end all throughout the
+ * kernel. This allows the same kernel to run as a Guest and as a native
+ * kernel, but it's slow because of all the indirect branches.
+ *
+ * Remember that David Wheeler quote about "Any problem in computer science can
+ * be solved with another layer of indirection"? The rest of that quote is
+ * "... But that usually will create another problem." This is the first of
+ * those problems.
+ *
+ * Our current solution is to allow the paravirt back end to optionally patch
+ * over the indirect calls to replace them with something more efficient. We
+ * patch two of the simplest of the most commonly called functions: disable
+ * interrupts and save interrupts. We usually have 6 or 10 bytes to patch
+ * into: the Guest versions of these operations are small enough that we can
+ * fit comfortably.
+ *
+ * First we need assembly templates of each of the patchable Guest operations,
+ * and these are in head_32.S.
+ */
+
+/*G:060 We construct a table from the assembler templates: */
+static const struct lguest_insns
+{
+ const char *start, *end;
+} lguest_insns[] = {
+ [PARAVIRT_PATCH(pv_irq_ops.irq_disable)] = { lgstart_cli, lgend_cli },
+ [PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
+};
+
+/*
+ * Now our patch routine is fairly simple (based on the native one in
+ * paravirt.c). If we have a replacement, we copy it in and return how much of
+ * the available space we used.
+ */
+static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
+ unsigned long addr, unsigned len)
+{
+ unsigned int insn_len;
+
+ /* Don't do anything special if we don't have a replacement */
+ if (type >= ARRAY_SIZE(lguest_insns) || !lguest_insns[type].start)
+ return paravirt_patch_default(type, clobber, ibuf, addr, len);
+
+ insn_len = lguest_insns[type].end - lguest_insns[type].start;
+
+ /* Similarly if it can't fit (doesn't happen, but let's be thorough). */
+ if (len < insn_len)
+ return paravirt_patch_default(type, clobber, ibuf, addr, len);
+
+ /* Copy in our instructions. */
+ memcpy(ibuf, lguest_insns[type].start, insn_len);
+ return insn_len;
+}
+
+/*G:029
+ * Once we get to lguest_init(), we know we're a Guest. The various
+ * pv_ops structures in the kernel provide points for (almost) every routine we
+ * have to override to avoid privileged instructions.
+ */
+__init void lguest_init(void)
+{
+ /* We're under lguest. */
+ pv_info.name = "lguest";
+ /* Paravirt is enabled. */
+ pv_info.paravirt_enabled = 1;
+ /* We're running at privilege level 1, not 0 as normal. */
+ pv_info.kernel_rpl = 1;
+ /* Everyone except Xen runs with this set. */
+ pv_info.shared_kernel_pmd = 1;
+ pv_info.features = 0;
+
+ /*
+ * We set up all the lguest overrides for sensitive operations. These
+ * are detailed with the operations themselves.
+ */
+
+ /* Interrupt-related operations */
+ pv_irq_ops.save_fl = PV_CALLEE_SAVE(lguest_save_fl);
+ pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
+ pv_irq_ops.irq_disable = PV_CALLEE_SAVE(lguest_irq_disable);
+ pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
+ pv_irq_ops.safe_halt = lguest_safe_halt;
+
+ /* Setup operations */
+ pv_init_ops.patch = lguest_patch;
+
+ /* Intercepts of various CPU instructions */
+ pv_cpu_ops.load_gdt = lguest_load_gdt;
+ pv_cpu_ops.cpuid = lguest_cpuid;
+ pv_cpu_ops.load_idt = lguest_load_idt;
+ pv_cpu_ops.iret = lguest_iret;
+ pv_cpu_ops.load_sp0 = lguest_load_sp0;
+ pv_cpu_ops.load_tr_desc = lguest_load_tr_desc;
+ pv_cpu_ops.set_ldt = lguest_set_ldt;
+ pv_cpu_ops.load_tls = lguest_load_tls;
+ pv_cpu_ops.get_debugreg = lguest_get_debugreg;
+ pv_cpu_ops.set_debugreg = lguest_set_debugreg;
+ pv_cpu_ops.clts = lguest_clts;
+ pv_cpu_ops.read_cr0 = lguest_read_cr0;
+ pv_cpu_ops.write_cr0 = lguest_write_cr0;
+ pv_cpu_ops.read_cr4 = lguest_read_cr4;
+ pv_cpu_ops.write_cr4 = lguest_write_cr4;
+ pv_cpu_ops.write_gdt_entry = lguest_write_gdt_entry;
+ pv_cpu_ops.write_idt_entry = lguest_write_idt_entry;
+ pv_cpu_ops.wbinvd = lguest_wbinvd;
+ pv_cpu_ops.start_context_switch = paravirt_start_context_switch;
+ pv_cpu_ops.end_context_switch = lguest_end_context_switch;
+
+ /* Pagetable management */
+ pv_mmu_ops.write_cr3 = lguest_write_cr3;
+ pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user;
+ pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single;
+ pv_mmu_ops.flush_tlb_kernel = lguest_flush_tlb_kernel;
+ pv_mmu_ops.set_pte = lguest_set_pte;
+ pv_mmu_ops.set_pte_at = lguest_set_pte_at;
+ pv_mmu_ops.set_pmd = lguest_set_pmd;
+#ifdef CONFIG_X86_PAE
+ pv_mmu_ops.set_pte_atomic = lguest_set_pte_atomic;
+ pv_mmu_ops.pte_clear = lguest_pte_clear;
+ pv_mmu_ops.pmd_clear = lguest_pmd_clear;
+ pv_mmu_ops.set_pud = lguest_set_pud;
+#endif
+ pv_mmu_ops.read_cr2 = lguest_read_cr2;
+ pv_mmu_ops.read_cr3 = lguest_read_cr3;
+ pv_mmu_ops.lazy_mode.enter = paravirt_enter_lazy_mmu;
+ pv_mmu_ops.lazy_mode.leave = lguest_leave_lazy_mmu_mode;
+ pv_mmu_ops.lazy_mode.flush = paravirt_flush_lazy_mmu;
+ pv_mmu_ops.pte_update = lguest_pte_update;
+ pv_mmu_ops.pte_update_defer = lguest_pte_update;
+
+#ifdef CONFIG_X86_LOCAL_APIC
+ /* APIC read/write intercepts */
+ set_lguest_basic_apic_ops();
+#endif
+
+ x86_init.resources.memory_setup = lguest_memory_setup;
+ x86_init.irqs.intr_init = lguest_init_IRQ;
+ x86_init.timers.timer_init = lguest_time_init;
+ x86_platform.calibrate_tsc = lguest_tsc_khz;
+ x86_platform.get_wallclock = lguest_get_wallclock;
+
+ /*
+ * Now is a good time to look at the implementations of these functions
+ * before returning to the rest of lguest_init().
+ */
+
+ /*G:070
+ * Now we've seen all the paravirt_ops, we return to
+ * lguest_init() where the rest of the fairly chaotic boot setup
+ * occurs.
+ */
+
+ /*
+ * The stack protector is a weird thing where gcc places a canary
+ * value on the stack and then checks it on return. This file is
+ * compiled with -fno-stack-protector it, so we got this far without
+ * problems. The value of the canary is kept at offset 20 from the
+ * %gs register, so we need to set that up before calling C functions
+ * in other files.
+ */
+ setup_stack_canary_segment(0);
+
+ /*
+ * We could just call load_stack_canary_segment(), but we might as well
+ * call switch_to_new_gdt() which loads the whole table and sets up the
+ * per-cpu segment descriptor register %fs as well.
+ */
+ switch_to_new_gdt(0);
+
+ /*
+ * The Host<->Guest Switcher lives at the top of our address space, and
+ * the Host told us how big it is when we made LGUEST_INIT hypercall:
+ * it put the answer in lguest_data.reserve_mem
+ */
+ reserve_top_address(lguest_data.reserve_mem);
+
+ /*
+ * If we don't initialize the lock dependency checker now, it crashes
+ * atomic_notifier_chain_register, then paravirt_disable_iospace.
+ */
+ lockdep_init();
+
+ /* Hook in our special panic hypercall code. */
+ atomic_notifier_chain_register(&panic_notifier_list, &paniced);
+
+ /*
+ * This is messy CPU setup stuff which the native boot code does before
+ * start_kernel, so we have to do, too:
+ */
+ cpu_detect(&new_cpu_data);
+ /* head.S usually sets up the first capability word, so do it here. */
+ new_cpu_data.x86_capability[0] = cpuid_edx(1);
+
+ /* Math is always hard! */
+ set_cpu_cap(&new_cpu_data, X86_FEATURE_FPU);
+
+ /* We don't have features. We have puppies! Puppies! */
+#ifdef CONFIG_X86_MCE
+ mca_cfg.disabled = true;
+#endif
+#ifdef CONFIG_ACPI
+ acpi_disabled = 1;
+#endif
+
+ /*
+ * We set the preferred console to "hvc". This is the "hypervisor
+ * virtual console" driver written by the PowerPC people, which we also
+ * adapted for lguest's use.
+ */
+ add_preferred_console("hvc", 0, NULL);
+
+ /* Register our very early console. */
+ virtio_cons_early_init(early_put_chars);
+
+ /* Don't let ACPI try to control our PCI interrupts. */
+ disable_acpi();
+
+ /* We control them ourselves, by overriding these two hooks. */
+ pcibios_enable_irq = lguest_enable_irq;
+ pcibios_disable_irq = lguest_disable_irq;
+
+ /*
+ * Last of all, we set the power management poweroff hook to point to
+ * the Guest routine to power off, and the reboot hook to our restart
+ * routine.
+ */
+ pm_power_off = lguest_power_off;
+ machine_ops.restart = lguest_restart;
+
+ /*
+ * Now we're set up, call i386_start_kernel() in head32.c and we proceed
+ * to boot as normal. It never returns.
+ */
+ i386_start_kernel();
+}
+/*
+ * This marks the end of stage II of our journey, The Guest.
+ *
+ * It is now time for us to explore the layer of virtual drivers and complete
+ * our understanding of the Guest in "make Drivers".
+ */