diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c
new file mode 100644
index 0000000..8fd6f44
--- /dev/null
+++ b/arch/x86/pci/common.c
@@ -0,0 +1,700 @@
+/*
+ *	Low-Level PCI Support for PC
+ *
+ *	(c) 1999--2000 Martin Mares <mj@ucw.cz>
+ */
+
+#include <linux/sched.h>
+#include <linux/pci.h>
+#include <linux/pci-acpi.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/dmi.h>
+#include <linux/slab.h>
+
+#include <asm-generic/pci-bridge.h>
+#include <asm/acpi.h>
+#include <asm/segment.h>
+#include <asm/io.h>
+#include <asm/smp.h>
+#include <asm/pci_x86.h>
+#include <asm/setup.h>
+
+unsigned int pci_probe = PCI_PROBE_BIOS | PCI_PROBE_CONF1 | PCI_PROBE_CONF2 |
+				PCI_PROBE_MMCONF;
+
+unsigned int pci_early_dump_regs;
+static int pci_bf_sort;
+static int smbios_type_b1_flag;
+int pci_routeirq;
+int noioapicquirk;
+#ifdef CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS
+int noioapicreroute = 0;
+#else
+int noioapicreroute = 1;
+#endif
+int pcibios_last_bus = -1;
+unsigned long pirq_table_addr;
+const struct pci_raw_ops *__read_mostly raw_pci_ops;
+const struct pci_raw_ops *__read_mostly raw_pci_ext_ops;
+
+int raw_pci_read(unsigned int domain, unsigned int bus, unsigned int devfn,
+						int reg, int len, u32 *val)
+{
+	if (domain == 0 && reg < 256 && raw_pci_ops)
+		return raw_pci_ops->read(domain, bus, devfn, reg, len, val);
+	if (raw_pci_ext_ops)
+		return raw_pci_ext_ops->read(domain, bus, devfn, reg, len, val);
+	return -EINVAL;
+}
+
+int raw_pci_write(unsigned int domain, unsigned int bus, unsigned int devfn,
+						int reg, int len, u32 val)
+{
+	if (domain == 0 && reg < 256 && raw_pci_ops)
+		return raw_pci_ops->write(domain, bus, devfn, reg, len, val);
+	if (raw_pci_ext_ops)
+		return raw_pci_ext_ops->write(domain, bus, devfn, reg, len, val);
+	return -EINVAL;
+}
+
+static int pci_read(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *value)
+{
+	return raw_pci_read(pci_domain_nr(bus), bus->number,
+				 devfn, where, size, value);
+}
+
+static int pci_write(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 value)
+{
+	return raw_pci_write(pci_domain_nr(bus), bus->number,
+				  devfn, where, size, value);
+}
+
+struct pci_ops pci_root_ops = {
+	.read = pci_read,
+	.write = pci_write,
+};
+
+/*
+ * This interrupt-safe spinlock protects all accesses to PCI
+ * configuration space.
+ */
+DEFINE_RAW_SPINLOCK(pci_config_lock);
+
+static int __init can_skip_ioresource_align(const struct dmi_system_id *d)
+{
+	pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
+	printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
+	return 0;
+}
+
+static const struct dmi_system_id can_skip_pciprobe_dmi_table[] __initconst = {
+/*
+ * Systems where PCI IO resource ISA alignment can be skipped
+ * when the ISA enable bit in the bridge control is not set
+ */
+	{
+		.callback = can_skip_ioresource_align,
+		.ident = "IBM System x3800",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "x3800"),
+		},
+	},
+	{
+		.callback = can_skip_ioresource_align,
+		.ident = "IBM System x3850",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "x3850"),
+		},
+	},
+	{
+		.callback = can_skip_ioresource_align,
+		.ident = "IBM System x3950",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "x3950"),
+		},
+	},
+	{}
+};
+
+void __init dmi_check_skip_isa_align(void)
+{
+	dmi_check_system(can_skip_pciprobe_dmi_table);
+}
+
+static void pcibios_fixup_device_resources(struct pci_dev *dev)
+{
+	struct resource *rom_r = &dev->resource[PCI_ROM_RESOURCE];
+	struct resource *bar_r;
+	int bar;
+
+	if (pci_probe & PCI_NOASSIGN_BARS) {
+		/*
+		* If the BIOS did not assign the BAR, zero out the
+		* resource so the kernel doesn't attmept to assign
+		* it later on in pci_assign_unassigned_resources
+		*/
+		for (bar = 0; bar <= PCI_STD_RESOURCE_END; bar++) {
+			bar_r = &dev->resource[bar];
+			if (bar_r->start == 0 && bar_r->end != 0) {
+				bar_r->flags = 0;
+				bar_r->end = 0;
+			}
+		}
+	}
+
+	if (pci_probe & PCI_NOASSIGN_ROMS) {
+		if (rom_r->parent)
+			return;
+		if (rom_r->start) {
+			/* we deal with BIOS assigned ROM later */
+			return;
+		}
+		rom_r->start = rom_r->end = rom_r->flags = 0;
+	}
+}
+
+/*
+ *  Called after each bus is probed, but before its children
+ *  are examined.
+ */
+
+void pcibios_fixup_bus(struct pci_bus *b)
+{
+	struct pci_dev *dev;
+
+	pci_read_bridge_bases(b);
+	list_for_each_entry(dev, &b->devices, bus_list)
+		pcibios_fixup_device_resources(dev);
+}
+
+void pcibios_add_bus(struct pci_bus *bus)
+{
+	acpi_pci_add_bus(bus);
+}
+
+void pcibios_remove_bus(struct pci_bus *bus)
+{
+	acpi_pci_remove_bus(bus);
+}
+
+/*
+ * Only use DMI information to set this if nothing was passed
+ * on the kernel command line (which was parsed earlier).
+ */
+
+static int __init set_bf_sort(const struct dmi_system_id *d)
+{
+	if (pci_bf_sort == pci_bf_sort_default) {
+		pci_bf_sort = pci_dmi_bf;
+		printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
+	}
+	return 0;
+}
+
+static void __init read_dmi_type_b1(const struct dmi_header *dm,
+				    void *private_data)
+{
+	u8 *d = (u8 *)dm + 4;
+
+	if (dm->type != 0xB1)
+		return;
+	switch (((*(u32 *)d) >> 9) & 0x03) {
+	case 0x00:
+		printk(KERN_INFO "dmi type 0xB1 record - unknown flag\n");
+		break;
+	case 0x01: /* set pci=bfsort */
+		smbios_type_b1_flag = 1;
+		break;
+	case 0x02: /* do not set pci=bfsort */
+		smbios_type_b1_flag = 2;
+		break;
+	default:
+		break;
+	}
+}
+
+static int __init find_sort_method(const struct dmi_system_id *d)
+{
+	dmi_walk(read_dmi_type_b1, NULL);
+
+	if (smbios_type_b1_flag == 1) {
+		set_bf_sort(d);
+		return 0;
+	}
+	return -1;
+}
+
+/*
+ * Enable renumbering of PCI bus# ranges to reach all PCI busses (Cardbus)
+ */
+#ifdef __i386__
+static int __init assign_all_busses(const struct dmi_system_id *d)
+{
+	pci_probe |= PCI_ASSIGN_ALL_BUSSES;
+	printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
+			" (pci=assign-busses)\n", d->ident);
+	return 0;
+}
+#endif
+
+static int __init set_scan_all(const struct dmi_system_id *d)
+{
+	printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n",
+	       d->ident);
+	pci_add_flags(PCI_SCAN_ALL_PCIE_DEVS);
+	return 0;
+}
+
+static const struct dmi_system_id pciprobe_dmi_table[] __initconst = {
+#ifdef __i386__
+/*
+ * Laptops which need pci=assign-busses to see Cardbus cards
+ */
+	{
+		.callback = assign_all_busses,
+		.ident = "Samsung X20 Laptop",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Samsung Electronics"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SX20S"),
+		},
+	},
+#endif		/* __i386__ */
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge 1950",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1950"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge 1955",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 1955"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge 2900",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2900"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge 2950",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge 2950"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "Dell PowerEdge R900",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "PowerEdge R900"),
+		},
+	},
+	{
+		.callback = find_sort_method,
+		.ident = "Dell System",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL20p G3",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G3"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL20p G4",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL20p G4"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL30p G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL30p G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL25p G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL25p G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL35p G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL35p G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL45p G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL45p G2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL45p G2"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL460c G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL460c G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL465c G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL465c G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL480c G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL480c G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant BL685c G1",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant BL685c G1"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant DL360",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant DL380",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"),
+		},
+	},
+#ifdef __i386__
+	{
+		.callback = assign_all_busses,
+		.ident = "Compaq EVO N800c",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Compaq"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "EVO N800c"),
+		},
+	},
+#endif
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant DL385 G2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"),
+		},
+	},
+	{
+		.callback = set_bf_sort,
+		.ident = "HP ProLiant DL585 G2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "HP"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"),
+		},
+	},
+	{
+		.callback = set_scan_all,
+		.ident = "Stratus/NEC ftServer",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "Stratus"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ftServer"),
+		},
+	},
+        {
+                .callback = set_scan_all,
+                .ident = "Stratus/NEC ftServer",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R32"),
+                },
+        },
+        {
+                .callback = set_scan_all,
+                .ident = "Stratus/NEC ftServer",
+                .matches = {
+                        DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
+                        DMI_MATCH(DMI_PRODUCT_NAME, "Express5800/R31"),
+                },
+        },
+	{}
+};
+
+void __init dmi_check_pciprobe(void)
+{
+	dmi_check_system(pciprobe_dmi_table);
+}
+
+void pcibios_scan_root(int busnum)
+{
+	struct pci_bus *bus;
+	struct pci_sysdata *sd;
+	LIST_HEAD(resources);
+
+	sd = kzalloc(sizeof(*sd), GFP_KERNEL);
+	if (!sd) {
+		printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum);
+		return;
+	}
+	sd->node = x86_pci_root_bus_node(busnum);
+	x86_pci_root_bus_resources(busnum, &resources);
+	printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
+	bus = pci_scan_root_bus(NULL, busnum, &pci_root_ops, sd, &resources);
+	if (!bus) {
+		pci_free_resource_list(&resources);
+		kfree(sd);
+		return;
+	}
+	pci_bus_add_devices(bus);
+}
+
+void __init pcibios_set_cache_line_size(void)
+{
+	struct cpuinfo_x86 *c = &boot_cpu_data;
+
+	/*
+	 * Set PCI cacheline size to that of the CPU if the CPU has reported it.
+	 * (For older CPUs that don't support cpuid, we se it to 32 bytes
+	 * It's also good for 386/486s (which actually have 16)
+	 * as quite a few PCI devices do not support smaller values.
+	 */
+	if (c->x86_clflush_size > 0) {
+		pci_dfl_cache_line_size = c->x86_clflush_size >> 2;
+		printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
+			pci_dfl_cache_line_size << 2);
+	} else {
+ 		pci_dfl_cache_line_size = 32 >> 2;
+		printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
+	}
+}
+
+int __init pcibios_init(void)
+{
+	if (!raw_pci_ops) {
+		printk(KERN_WARNING "PCI: System does not support PCI\n");
+		return 0;
+	}
+
+	pcibios_set_cache_line_size();
+	pcibios_resource_survey();
+
+	if (pci_bf_sort >= pci_force_bf)
+		pci_sort_breadthfirst();
+	return 0;
+}
+
+char *__init pcibios_setup(char *str)
+{
+	if (!strcmp(str, "off")) {
+		pci_probe = 0;
+		return NULL;
+	} else if (!strcmp(str, "bfsort")) {
+		pci_bf_sort = pci_force_bf;
+		return NULL;
+	} else if (!strcmp(str, "nobfsort")) {
+		pci_bf_sort = pci_force_nobf;
+		return NULL;
+	}
+#ifdef CONFIG_PCI_BIOS
+	else if (!strcmp(str, "bios")) {
+		pci_probe = PCI_PROBE_BIOS;
+		return NULL;
+	} else if (!strcmp(str, "nobios")) {
+		pci_probe &= ~PCI_PROBE_BIOS;
+		return NULL;
+	} else if (!strcmp(str, "biosirq")) {
+		pci_probe |= PCI_BIOS_IRQ_SCAN;
+		return NULL;
+	} else if (!strncmp(str, "pirqaddr=", 9)) {
+		pirq_table_addr = simple_strtoul(str+9, NULL, 0);
+		return NULL;
+	}
+#endif
+#ifdef CONFIG_PCI_DIRECT
+	else if (!strcmp(str, "conf1")) {
+		pci_probe = PCI_PROBE_CONF1 | PCI_NO_CHECKS;
+		return NULL;
+	}
+	else if (!strcmp(str, "conf2")) {
+		pci_probe = PCI_PROBE_CONF2 | PCI_NO_CHECKS;
+		return NULL;
+	}
+#endif
+#ifdef CONFIG_PCI_MMCONFIG
+	else if (!strcmp(str, "nommconf")) {
+		pci_probe &= ~PCI_PROBE_MMCONF;
+		return NULL;
+	}
+	else if (!strcmp(str, "check_enable_amd_mmconf")) {
+		pci_probe |= PCI_CHECK_ENABLE_AMD_MMCONF;
+		return NULL;
+	}
+#endif
+	else if (!strcmp(str, "noacpi")) {
+		acpi_noirq_set();
+		return NULL;
+	}
+	else if (!strcmp(str, "noearly")) {
+		pci_probe |= PCI_PROBE_NOEARLY;
+		return NULL;
+	}
+	else if (!strcmp(str, "usepirqmask")) {
+		pci_probe |= PCI_USE_PIRQ_MASK;
+		return NULL;
+	} else if (!strncmp(str, "irqmask=", 8)) {
+		pcibios_irq_mask = simple_strtol(str+8, NULL, 0);
+		return NULL;
+	} else if (!strncmp(str, "lastbus=", 8)) {
+		pcibios_last_bus = simple_strtol(str+8, NULL, 0);
+		return NULL;
+	} else if (!strcmp(str, "rom")) {
+		pci_probe |= PCI_ASSIGN_ROMS;
+		return NULL;
+	} else if (!strcmp(str, "norom")) {
+		pci_probe |= PCI_NOASSIGN_ROMS;
+		return NULL;
+	} else if (!strcmp(str, "nobar")) {
+		pci_probe |= PCI_NOASSIGN_BARS;
+		return NULL;
+	} else if (!strcmp(str, "assign-busses")) {
+		pci_probe |= PCI_ASSIGN_ALL_BUSSES;
+		return NULL;
+	} else if (!strcmp(str, "use_crs")) {
+		pci_probe |= PCI_USE__CRS;
+		return NULL;
+	} else if (!strcmp(str, "nocrs")) {
+		pci_probe |= PCI_ROOT_NO_CRS;
+		return NULL;
+	} else if (!strcmp(str, "earlydump")) {
+		pci_early_dump_regs = 1;
+		return NULL;
+	} else if (!strcmp(str, "routeirq")) {
+		pci_routeirq = 1;
+		return NULL;
+	} else if (!strcmp(str, "skip_isa_align")) {
+		pci_probe |= PCI_CAN_SKIP_ISA_ALIGN;
+		return NULL;
+	} else if (!strcmp(str, "noioapicquirk")) {
+		noioapicquirk = 1;
+		return NULL;
+	} else if (!strcmp(str, "ioapicreroute")) {
+		if (noioapicreroute != -1)
+			noioapicreroute = 0;
+		return NULL;
+	} else if (!strcmp(str, "noioapicreroute")) {
+		if (noioapicreroute != -1)
+			noioapicreroute = 1;
+		return NULL;
+	}
+	return str;
+}
+
+unsigned int pcibios_assign_all_busses(void)
+{
+	return (pci_probe & PCI_ASSIGN_ALL_BUSSES) ? 1 : 0;
+}
+
+int pcibios_add_device(struct pci_dev *dev)
+{
+	struct setup_data *data;
+	struct pci_setup_rom *rom;
+	u64 pa_data;
+
+	pa_data = boot_params.hdr.setup_data;
+	while (pa_data) {
+		data = ioremap(pa_data, sizeof(*rom));
+		if (!data)
+			return -ENOMEM;
+
+		if (data->type == SETUP_PCI) {
+			rom = (struct pci_setup_rom *)data;
+
+			if ((pci_domain_nr(dev->bus) == rom->segment) &&
+			    (dev->bus->number == rom->bus) &&
+			    (PCI_SLOT(dev->devfn) == rom->device) &&
+			    (PCI_FUNC(dev->devfn) == rom->function) &&
+			    (dev->vendor == rom->vendor) &&
+			    (dev->device == rom->devid)) {
+				dev->rom = pa_data +
+				      offsetof(struct pci_setup_rom, romdata);
+				dev->romlen = rom->pcilen;
+			}
+		}
+		pa_data = data->next;
+		iounmap(data);
+	}
+	return 0;
+}
+
+int pcibios_enable_device(struct pci_dev *dev, int mask)
+{
+	int err;
+
+	if ((err = pci_enable_resources(dev, mask)) < 0)
+		return err;
+
+	if (!pci_dev_msi_enabled(dev))
+		return pcibios_enable_irq(dev);
+	return 0;
+}
+
+void pcibios_disable_device (struct pci_dev *dev)
+{
+	if (!pci_dev_msi_enabled(dev) && pcibios_disable_irq)
+		pcibios_disable_irq(dev);
+}
+
+int pci_ext_cfg_avail(void)
+{
+	if (raw_pci_ext_ops)
+		return 1;
+	else
+		return 0;
+}