File-copy from v4.4.100
This is the result of 'cp' from a linux-stable tree with the 'v4.4.100'
tag checked out (commit 26d6298789e695c9f627ce49a7bbd2286405798a) on
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Please refer to that tree for all history prior to this point.
Change-Id: I8a9ee2aea93cd29c52c847d0ce33091a73ae6afe
diff --git a/drivers/Makefile b/drivers/Makefile
new file mode 100644
index 0000000..098997f
--- /dev/null
+++ b/drivers/Makefile
@@ -0,0 +1,175 @@
+#
+# Makefile for the Linux kernel device drivers.
+#
+# 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
+# Rewritten to use lists instead of if-statements.
+#
+
+obj-y += irqchip/
+obj-y += bus/
+
+obj-$(CONFIG_GENERIC_PHY) += phy/
+
+# GPIO must come after pinctrl as gpios may need to mux pins etc
+obj-$(CONFIG_PINCTRL) += pinctrl/
+obj-y += gpio/
+obj-y += pwm/
+obj-$(CONFIG_PCI) += pci/
+obj-$(CONFIG_PARISC) += parisc/
+obj-$(CONFIG_RAPIDIO) += rapidio/
+obj-y += video/
+obj-y += idle/
+
+# IPMI must come before ACPI in order to provide IPMI opregion support
+obj-$(CONFIG_IPMI_HANDLER) += char/ipmi/
+
+obj-$(CONFIG_ACPI) += acpi/
+obj-$(CONFIG_SFI) += sfi/
+# PnP must come after ACPI since it will eventually need to check if acpi
+# was used and do nothing if so
+obj-$(CONFIG_PNP) += pnp/
+obj-y += amba/
+# Many drivers will want to use DMA so this has to be made available
+# really early.
+obj-$(CONFIG_DMADEVICES) += dma/
+
+# SOC specific infrastructure drivers.
+obj-y += soc/
+
+obj-$(CONFIG_VIRTIO) += virtio/
+obj-$(CONFIG_XEN) += xen/
+
+# regulators early, since some subsystems rely on them to initialize
+obj-$(CONFIG_REGULATOR) += regulator/
+
+# reset controllers early, since gpu drivers might rely on them to initialize
+obj-$(CONFIG_RESET_CONTROLLER) += reset/
+
+# tty/ comes before char/ so that the VT console is the boot-time
+# default.
+obj-y += tty/
+obj-y += char/
+
+# iommu/ comes before gpu as gpu are using iommu controllers
+obj-$(CONFIG_IOMMU_SUPPORT) += iommu/
+
+# gpu/ comes after char for AGP vs DRM startup and after iommu
+obj-y += gpu/
+
+obj-$(CONFIG_CONNECTOR) += connector/
+
+# i810fb and intelfb depend on char/agp/
+obj-$(CONFIG_FB_I810) += video/fbdev/i810/
+obj-$(CONFIG_FB_INTEL) += video/fbdev/intelfb/
+
+obj-$(CONFIG_PARPORT) += parport/
+obj-$(CONFIG_NVM) += lightnvm/
+obj-y += base/ block/ misc/ mfd/ nfc/
+obj-$(CONFIG_LIBNVDIMM) += nvdimm/
+obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
+obj-$(CONFIG_NUBUS) += nubus/
+obj-y += macintosh/
+obj-$(CONFIG_IDE) += ide/
+obj-$(CONFIG_SCSI) += scsi/
+obj-y += nvme/
+obj-$(CONFIG_ATA) += ata/
+obj-$(CONFIG_TARGET_CORE) += target/
+obj-$(CONFIG_MTD) += mtd/
+obj-$(CONFIG_SPI) += spi/
+obj-$(CONFIG_SPMI) += spmi/
+obj-y += hsi/
+obj-y += net/
+obj-$(CONFIG_ATM) += atm/
+obj-$(CONFIG_FUSION) += message/
+obj-y += firewire/
+obj-$(CONFIG_UIO) += uio/
+obj-$(CONFIG_VFIO) += vfio/
+obj-y += cdrom/
+obj-y += auxdisplay/
+obj-$(CONFIG_PCCARD) += pcmcia/
+obj-$(CONFIG_DIO) += dio/
+obj-$(CONFIG_SBUS) += sbus/
+obj-$(CONFIG_ZORRO) += zorro/
+obj-$(CONFIG_ATA_OVER_ETH) += block/aoe/
+obj-$(CONFIG_PARIDE) += block/paride/
+obj-$(CONFIG_TC) += tc/
+obj-$(CONFIG_UWB) += uwb/
+obj-$(CONFIG_USB_PHY) += usb/
+obj-$(CONFIG_USB) += usb/
+obj-$(CONFIG_PCI) += usb/
+obj-$(CONFIG_USB_GADGET) += usb/
+obj-$(CONFIG_OF) += usb/
+obj-$(CONFIG_SERIO) += input/serio/
+obj-$(CONFIG_GAMEPORT) += input/gameport/
+obj-$(CONFIG_INPUT) += input/
+obj-$(CONFIG_RTC_LIB) += rtc/
+obj-y += i2c/ media/
+obj-$(CONFIG_PPS) += pps/
+obj-$(CONFIG_PTP_1588_CLOCK) += ptp/
+obj-$(CONFIG_W1) += w1/
+obj-$(CONFIG_POWER_SUPPLY) += power/
+obj-$(CONFIG_HWMON) += hwmon/
+obj-$(CONFIG_THERMAL) += thermal/
+obj-$(CONFIG_WATCHDOG) += watchdog/
+obj-$(CONFIG_MD) += md/
+obj-$(CONFIG_BT) += bluetooth/
+obj-$(CONFIG_ACCESSIBILITY) += accessibility/
+obj-$(CONFIG_ISDN) += isdn/
+obj-$(CONFIG_EDAC) += edac/
+obj-$(CONFIG_EISA) += eisa/
+obj-y += lguest/
+obj-$(CONFIG_CPU_FREQ) += cpufreq/
+obj-$(CONFIG_CPU_IDLE) += cpuidle/
+obj-y += mmc/
+obj-$(CONFIG_MEMSTICK) += memstick/
+obj-y += leds/
+obj-$(CONFIG_INFINIBAND) += infiniband/
+obj-$(CONFIG_SGI_SN) += sn/
+obj-y += firmware/
+obj-$(CONFIG_CRYPTO) += crypto/
+obj-$(CONFIG_SUPERH) += sh/
+obj-$(CONFIG_ARCH_SHMOBILE) += sh/
+ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
+obj-y += clocksource/
+endif
+obj-$(CONFIG_DCA) += dca/
+obj-$(CONFIG_HID) += hid/
+obj-$(CONFIG_PPC_PS3) += ps3/
+obj-$(CONFIG_OF) += of/
+obj-$(CONFIG_SSB) += ssb/
+obj-$(CONFIG_BCMA) += bcma/
+obj-$(CONFIG_VHOST_RING) += vhost/
+obj-$(CONFIG_VLYNQ) += vlynq/
+obj-$(CONFIG_STAGING) += staging/
+obj-y += platform/
+#common clk code
+obj-y += clk/
+
+obj-$(CONFIG_MAILBOX) += mailbox/
+obj-$(CONFIG_HWSPINLOCK) += hwspinlock/
+obj-$(CONFIG_REMOTEPROC) += remoteproc/
+obj-$(CONFIG_RPMSG) += rpmsg/
+
+# Virtualization drivers
+obj-$(CONFIG_VIRT_DRIVERS) += virt/
+obj-$(CONFIG_HYPERV) += hv/
+
+obj-$(CONFIG_PM_DEVFREQ) += devfreq/
+obj-$(CONFIG_EXTCON) += extcon/
+obj-$(CONFIG_MEMORY) += memory/
+obj-$(CONFIG_IIO) += iio/
+obj-$(CONFIG_VME_BUS) += vme/
+obj-$(CONFIG_IPACK_BUS) += ipack/
+obj-$(CONFIG_NTB) += ntb/
+obj-$(CONFIG_FMC) += fmc/
+obj-$(CONFIG_POWERCAP) += powercap/
+obj-$(CONFIG_MCB) += mcb/
+obj-$(CONFIG_PERF_EVENTS) += perf/
+obj-$(CONFIG_RAS) += ras/
+obj-$(CONFIG_THUNDERBOLT) += thunderbolt/
+obj-$(CONFIG_CORESIGHT) += hwtracing/coresight/
+obj-y += hwtracing/intel_th/
+obj-$(CONFIG_STM) += hwtracing/stm/
+obj-$(CONFIG_ANDROID) += android/
+obj-$(CONFIG_NVMEM) += nvmem/
+obj-$(CONFIG_FPGA) += fpga/