diff --git a/drivers/input/touchscreen/88pm860x-ts.c b/drivers/input/touchscreen/88pm860x-ts.c
new file mode 100644
index 0000000..251ff2a
--- /dev/null
+++ b/drivers/input/touchscreen/88pm860x-ts.c
@@ -0,0 +1,304 @@
+/*
+ * Touchscreen driver for Marvell 88PM860x
+ *
+ * Copyright (C) 2009 Marvell International Ltd.
+ * 	Haojian Zhuang <haojian.zhuang@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/mfd/88pm860x.h>
+#include <linux/slab.h>
+#include <linux/device.h>
+
+#define MEAS_LEN		(8)
+#define ACCURATE_BIT		(12)
+
+/* touch register */
+#define MEAS_EN3		(0x52)
+
+#define MEAS_TSIX_1		(0x8D)
+#define MEAS_TSIX_2		(0x8E)
+#define MEAS_TSIY_1		(0x8F)
+#define MEAS_TSIY_2		(0x90)
+#define MEAS_TSIZ1_1		(0x91)
+#define MEAS_TSIZ1_2		(0x92)
+#define MEAS_TSIZ2_1		(0x93)
+#define MEAS_TSIZ2_2		(0x94)
+
+/* bit definitions of touch */
+#define MEAS_PD_EN		(1 << 3)
+#define MEAS_TSIX_EN		(1 << 4)
+#define MEAS_TSIY_EN		(1 << 5)
+#define MEAS_TSIZ1_EN		(1 << 6)
+#define MEAS_TSIZ2_EN		(1 << 7)
+
+struct pm860x_touch {
+	struct input_dev *idev;
+	struct i2c_client *i2c;
+	struct pm860x_chip *chip;
+	int irq;
+	int res_x;		/* resistor of Xplate */
+};
+
+static irqreturn_t pm860x_touch_handler(int irq, void *data)
+{
+	struct pm860x_touch *touch = data;
+	struct pm860x_chip *chip = touch->chip;
+	unsigned char buf[MEAS_LEN];
+	int x, y, pen_down;
+	int z1, z2, rt = 0;
+	int ret;
+
+	ret = pm860x_bulk_read(touch->i2c, MEAS_TSIX_1, MEAS_LEN, buf);
+	if (ret < 0)
+		goto out;
+
+	pen_down = buf[1] & (1 << 6);
+	x = ((buf[0] & 0xFF) << 4) | (buf[1] & 0x0F);
+	y = ((buf[2] & 0xFF) << 4) | (buf[3] & 0x0F);
+	z1 = ((buf[4] & 0xFF) << 4) | (buf[5] & 0x0F);
+	z2 = ((buf[6] & 0xFF) << 4) | (buf[7] & 0x0F);
+
+	if (pen_down) {
+		if ((x != 0) && (z1 != 0) && (touch->res_x != 0)) {
+			rt = z2 / z1 - 1;
+			rt = (rt * touch->res_x * x) >> ACCURATE_BIT;
+			dev_dbg(chip->dev, "z1:%d, z2:%d, rt:%d\n",
+				z1, z2, rt);
+		}
+		input_report_abs(touch->idev, ABS_X, x);
+		input_report_abs(touch->idev, ABS_Y, y);
+		input_report_abs(touch->idev, ABS_PRESSURE, rt);
+		input_report_key(touch->idev, BTN_TOUCH, 1);
+		dev_dbg(chip->dev, "pen down at [%d, %d].\n", x, y);
+	} else {
+		input_report_abs(touch->idev, ABS_PRESSURE, 0);
+		input_report_key(touch->idev, BTN_TOUCH, 0);
+		dev_dbg(chip->dev, "pen release\n");
+	}
+	input_sync(touch->idev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int pm860x_touch_open(struct input_dev *dev)
+{
+	struct pm860x_touch *touch = input_get_drvdata(dev);
+	int data, ret;
+
+	data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN
+		| MEAS_TSIZ1_EN | MEAS_TSIZ2_EN;
+	ret = pm860x_set_bits(touch->i2c, MEAS_EN3, data, data);
+	if (ret < 0)
+		goto out;
+	return 0;
+out:
+	return ret;
+}
+
+static void pm860x_touch_close(struct input_dev *dev)
+{
+	struct pm860x_touch *touch = input_get_drvdata(dev);
+	int data;
+
+	data = MEAS_PD_EN | MEAS_TSIX_EN | MEAS_TSIY_EN
+		| MEAS_TSIZ1_EN | MEAS_TSIZ2_EN;
+	pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0);
+}
+
+#ifdef CONFIG_OF
+static int pm860x_touch_dt_init(struct platform_device *pdev,
+					  struct pm860x_chip *chip,
+					  int *res_x)
+{
+	struct device_node *np = pdev->dev.parent->of_node;
+	struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
+				 : chip->companion;
+	int data, n, ret;
+	if (!np)
+		return -ENODEV;
+	np = of_find_node_by_name(np, "touch");
+	if (!np) {
+		dev_err(&pdev->dev, "Can't find touch node\n");
+		return -EINVAL;
+	}
+	/* set GPADC MISC1 register */
+	data = 0;
+	if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-prebias", &n))
+		data |= (n << 1) & PM8607_GPADC_PREBIAS_MASK;
+	if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-slot-cycle", &n))
+		data |= (n << 3) & PM8607_GPADC_SLOT_CYCLE_MASK;
+	if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-off-scale", &n))
+		data |= (n << 5) & PM8607_GPADC_OFF_SCALE_MASK;
+	if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-sw-cal", &n))
+		data |= (n << 7) & PM8607_GPADC_SW_CAL_MASK;
+	if (data) {
+		ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data);
+		if (ret < 0)
+			return -EINVAL;
+	}
+	/* set tsi prebias time */
+	if (!of_property_read_u32(np, "marvell,88pm860x-tsi-prebias", &data)) {
+		ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data);
+		if (ret < 0)
+			return -EINVAL;
+	}
+	/* set prebias & prechg time of pen detect */
+	data = 0;
+	if (!of_property_read_u32(np, "marvell,88pm860x-pen-prebias", &n))
+		data |= n & PM8607_PD_PREBIAS_MASK;
+	if (!of_property_read_u32(np, "marvell,88pm860x-pen-prechg", &n))
+		data |= n & PM8607_PD_PRECHG_MASK;
+	if (data) {
+		ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data);
+		if (ret < 0)
+			return -EINVAL;
+	}
+	of_property_read_u32(np, "marvell,88pm860x-resistor-X", res_x);
+	return 0;
+}
+#else
+#define pm860x_touch_dt_init(x, y, z)	(-1)
+#endif
+
+static int pm860x_touch_probe(struct platform_device *pdev)
+{
+	struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent);
+	struct pm860x_touch_pdata *pdata = dev_get_platdata(&pdev->dev);
+	struct pm860x_touch *touch;
+	struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \
+				 : chip->companion;
+	int irq, ret, res_x = 0, data = 0;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "No IRQ resource!\n");
+		return -EINVAL;
+	}
+
+	if (pm860x_touch_dt_init(pdev, chip, &res_x)) {
+		if (pdata) {
+			/* set GPADC MISC1 register */
+			data = 0;
+			data |= (pdata->gpadc_prebias << 1)
+				& PM8607_GPADC_PREBIAS_MASK;
+			data |= (pdata->slot_cycle << 3)
+				& PM8607_GPADC_SLOT_CYCLE_MASK;
+			data |= (pdata->off_scale << 5)
+				& PM8607_GPADC_OFF_SCALE_MASK;
+			data |= (pdata->sw_cal << 7)
+				& PM8607_GPADC_SW_CAL_MASK;
+			if (data) {
+				ret = pm860x_reg_write(i2c,
+					PM8607_GPADC_MISC1, data);
+				if (ret < 0)
+					return -EINVAL;
+			}
+			/* set tsi prebias time */
+			if (pdata->tsi_prebias) {
+				data = pdata->tsi_prebias;
+				ret = pm860x_reg_write(i2c,
+					PM8607_TSI_PREBIAS, data);
+				if (ret < 0)
+					return -EINVAL;
+			}
+			/* set prebias & prechg time of pen detect */
+			data = 0;
+			data |= pdata->pen_prebias
+				& PM8607_PD_PREBIAS_MASK;
+			data |= (pdata->pen_prechg << 5)
+				& PM8607_PD_PRECHG_MASK;
+			if (data) {
+				ret = pm860x_reg_write(i2c,
+					PM8607_PD_PREBIAS, data);
+				if (ret < 0)
+					return -EINVAL;
+			}
+			res_x = pdata->res_x;
+		} else {
+			dev_err(&pdev->dev, "failed to get platform data\n");
+			return -EINVAL;
+		}
+	}
+	/* enable GPADC */
+	ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1, PM8607_GPADC_EN,
+			      PM8607_GPADC_EN);
+	if (ret)
+		return ret;
+
+	touch = devm_kzalloc(&pdev->dev, sizeof(struct pm860x_touch),
+			     GFP_KERNEL);
+	if (!touch)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, touch);
+
+	touch->idev = devm_input_allocate_device(&pdev->dev);
+	if (!touch->idev) {
+		dev_err(&pdev->dev, "Failed to allocate input device!\n");
+		return -ENOMEM;
+	}
+
+	touch->idev->name = "88pm860x-touch";
+	touch->idev->phys = "88pm860x/input0";
+	touch->idev->id.bustype = BUS_I2C;
+	touch->idev->dev.parent = &pdev->dev;
+	touch->idev->open = pm860x_touch_open;
+	touch->idev->close = pm860x_touch_close;
+	touch->chip = chip;
+	touch->i2c = i2c;
+	touch->irq = irq;
+	touch->res_x = res_x;
+	input_set_drvdata(touch->idev, touch);
+
+	ret = devm_request_threaded_irq(&pdev->dev, touch->irq, NULL,
+					pm860x_touch_handler, IRQF_ONESHOT,
+					"touch", touch);
+	if (ret < 0)
+		return ret;
+
+	__set_bit(EV_ABS, touch->idev->evbit);
+	__set_bit(ABS_X, touch->idev->absbit);
+	__set_bit(ABS_Y, touch->idev->absbit);
+	__set_bit(ABS_PRESSURE, touch->idev->absbit);
+	__set_bit(EV_SYN, touch->idev->evbit);
+	__set_bit(EV_KEY, touch->idev->evbit);
+	__set_bit(BTN_TOUCH, touch->idev->keybit);
+
+	input_set_abs_params(touch->idev, ABS_X, 0, 1 << ACCURATE_BIT, 0, 0);
+	input_set_abs_params(touch->idev, ABS_Y, 0, 1 << ACCURATE_BIT, 0, 0);
+	input_set_abs_params(touch->idev, ABS_PRESSURE, 0, 1 << ACCURATE_BIT,
+				0, 0);
+
+	ret = input_register_device(touch->idev);
+	if (ret < 0) {
+		dev_err(chip->dev, "Failed to register touch!\n");
+		return ret;
+	}
+
+	platform_set_drvdata(pdev, touch);
+	return 0;
+}
+
+static struct platform_driver pm860x_touch_driver = {
+	.driver	= {
+		.name	= "88pm860x-touch",
+	},
+	.probe	= pm860x_touch_probe,
+};
+module_platform_driver(pm860x_touch_driver);
+
+MODULE_DESCRIPTION("Touchscreen driver for Marvell Semiconductor 88PM860x");
+MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:88pm860x-touch");
+
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
new file mode 100644
index 0000000..ae33da7
--- /dev/null
+++ b/drivers/input/touchscreen/Kconfig
@@ -0,0 +1,1109 @@
+#
+# Touchscreen driver configuration
+#
+menuconfig INPUT_TOUCHSCREEN
+	bool "Touchscreens"
+	help
+	  Say Y here, and a list of supported touchscreens will be displayed.
+	  This option doesn't affect the kernel.
+
+	  If unsure, say Y.
+
+if INPUT_TOUCHSCREEN
+
+config TOUCHSCREEN_PROPERTIES
+	def_tristate INPUT
+	depends on INPUT
+
+config TOUCHSCREEN_88PM860X
+	tristate "Marvell 88PM860x touchscreen"
+	depends on MFD_88PM860X
+	help
+	  Say Y here if you have a 88PM860x PMIC and want to enable
+	  support for the built-in touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called 88pm860x-ts.
+
+config TOUCHSCREEN_ADS7846
+	tristate "ADS7846/TSC2046/AD7873 and AD(S)7843 based touchscreens"
+	depends on SPI_MASTER
+	depends on HWMON = n || HWMON
+	help
+	  Say Y here if you have a touchscreen interface using the
+	  ADS7846/TSC2046/AD7873 or ADS7843/AD7843 controller,
+	  and your board-specific setup code includes that in its
+	  table of SPI devices.
+
+	  If HWMON is selected, and the driver is told the reference voltage
+	  on your board, you will also get hwmon interfaces for the voltage
+	  (and on ads7846/tsc2046/ad7873, temperature) sensors of this chip.
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ads7846.
+
+config TOUCHSCREEN_AD7877
+	tristate "AD7877 based touchscreens"
+	depends on SPI_MASTER
+	help
+	  Say Y here if you have a touchscreen interface using the
+	  AD7877 controller, and your board-specific initialization
+	  code includes that in its table of SPI devices.
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7877.
+
+config TOUCHSCREEN_AD7879
+	tristate "Analog Devices AD7879-1/AD7889-1 touchscreen interface"
+	help
+	  Say Y here if you want to support a touchscreen interface using
+	  the AD7879-1/AD7889-1 controller.
+
+	  You should select a bus connection too.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7879.
+
+config TOUCHSCREEN_AD7879_I2C
+	tristate "support I2C bus connection"
+	depends on TOUCHSCREEN_AD7879 && I2C
+	help
+	  Say Y here if you have AD7879-1/AD7889-1 hooked to an I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7879-i2c.
+
+config TOUCHSCREEN_AD7879_SPI
+	tristate "support SPI bus connection"
+	depends on TOUCHSCREEN_AD7879 && SPI_MASTER
+	help
+	  Say Y here if you have AD7879-1/AD7889-1 hooked to a SPI bus.
+
+	  If unsure, say N (but it's safe to say "Y").
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ad7879-spi.
+
+config TOUCHSCREEN_AR1021_I2C
+	tristate "Microchip AR1021 i2c touchscreen"
+	depends on I2C && OF
+	help
+	  Say Y here if you have the Microchip AR1021 touchscreen controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ar1021_i2c.
+
+config TOUCHSCREEN_ATMEL_MXT
+	tristate "Atmel mXT I2C Touchscreen"
+	depends on I2C
+	select FW_LOADER
+	help
+	  Say Y here if you have Atmel mXT series I2C touchscreen,
+	  such as AT42QT602240/ATMXT224, connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atmel_mxt_ts.
+
+config TOUCHSCREEN_AUO_PIXCIR
+	tristate "AUO in-cell touchscreen using Pixcir ICs"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y here if you have a AUO display with in-cell touchscreen
+	  using Pixcir ICs.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called auo-pixcir-ts.
+
+config TOUCHSCREEN_BU21013
+	tristate "BU21013 based touch panel controllers"
+	depends on I2C
+	help
+	  Say Y here if you have a bu21013 touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bu21013_ts.
+
+config TOUCHSCREEN_CHIPONE_ICN8318
+	tristate "chipone icn8318 touchscreen controller"
+	depends on GPIOLIB || COMPILE_TEST
+	depends on I2C
+	depends on OF
+	help
+	  Say Y here if you have a ChipOne icn8318 based I2C touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called chipone_icn8318.
+
+config TOUCHSCREEN_CY8CTMG110
+	tristate "cy8ctmg110 touchscreen"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y here if you have a cy8ctmg110 capacitive touchscreen on
+	  an AAVA device.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cy8ctmg110_ts.
+
+config TOUCHSCREEN_CYTTSP_CORE
+	tristate "Cypress TTSP touchscreen"
+	help
+	  Say Y here if you have a touchscreen using controller from
+	  the Cypress TrueTouch(tm) Standard Product family connected
+	  to your system. You will also need to select appropriate
+	  bus connection below.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp_core.
+
+config TOUCHSCREEN_CYTTSP_I2C
+	tristate "support I2C bus connection"
+	depends on TOUCHSCREEN_CYTTSP_CORE && I2C
+	help
+	  Say Y here if the touchscreen is connected via I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp_i2c.
+
+config TOUCHSCREEN_CYTTSP_SPI
+	tristate "support SPI bus connection"
+	depends on TOUCHSCREEN_CYTTSP_CORE && SPI_MASTER
+	help
+	  Say Y here if the touchscreen is connected via SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp_spi.
+
+config TOUCHSCREEN_CYTTSP4_CORE
+	tristate "Cypress TrueTouch Gen4 Touchscreen Driver"
+	help
+	  Core driver for Cypress TrueTouch(tm) Standard Product
+	  Generation4 touchscreen controllers.
+
+	  Say Y here if you have a Cypress Gen4 touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here.
+
+config TOUCHSCREEN_CYTTSP4_I2C
+	tristate "support I2C bus connection"
+	depends on TOUCHSCREEN_CYTTSP4_CORE && I2C
+	help
+	  Say Y here if the touchscreen is connected via I2C bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp4_i2c.
+
+config TOUCHSCREEN_CYTTSP4_SPI
+	tristate "support SPI bus connection"
+	depends on TOUCHSCREEN_CYTTSP4_CORE && SPI_MASTER
+	help
+	  Say Y here if the touchscreen is connected via SPI bus.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cyttsp4_spi.
+
+config TOUCHSCREEN_DA9034
+	tristate "Touchscreen support for Dialog Semiconductor DA9034"
+	depends on PMIC_DA903X
+	default y
+	help
+	  Say Y here to enable the support for the touchscreen found
+	  on Dialog Semiconductor DA9034 PMIC.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called da9034-ts.
+
+config TOUCHSCREEN_DA9052
+	tristate "Dialog DA9052/DA9053 TSI"
+	depends on PMIC_DA9052
+	help
+	  Say Y here to support the touchscreen found on Dialog Semiconductor
+	  DA9052-BC and DA9053-AA/Bx PMICs.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called da9052_tsi.
+
+config TOUCHSCREEN_DYNAPRO
+	tristate "Dynapro serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Dynapro serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called dynapro.
+
+config TOUCHSCREEN_HAMPSHIRE
+	tristate "Hampshire serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Hampshire serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hampshire.
+
+config TOUCHSCREEN_EETI
+	tristate "EETI touchscreen panel support"
+	depends on I2C
+	help
+	  Say Y here to enable support for I2C connected EETI touch panels.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called eeti_ts.
+
+config TOUCHSCREEN_EGALAX
+	tristate "EETI eGalax multi-touch panel support"
+	depends on I2C && OF
+	help
+	  Say Y here to enable support for I2C connected EETI
+	  eGalax multi-touch panels.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called egalax_ts.
+
+config TOUCHSCREEN_FT6236
+	tristate "FT6236 I2C touchscreen"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y here to enable support for the I2C connected FT6x06 and
+	  FT6x36 family of capacitive touchscreen drivers.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ft6236.
+
+config TOUCHSCREEN_FUJITSU
+	tristate "Fujitsu serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have the Fujitsu touchscreen (such as one
+	  installed in Lifebook P series laptop) connected to your
+	  system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called fujitsu-ts.
+
+config TOUCHSCREEN_GOODIX
+	tristate "Goodix I2C touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have the Goodix touchscreen (such as one
+	  installed in Onda v975w tablets) connected to your
+	  system. It also supports 5-finger chip models, which can be
+	  found on ARM tablets, like Wexler TAB7200 and MSI Primo73.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called goodix.
+
+config TOUCHSCREEN_ILI210X
+	tristate "Ilitek ILI210X based touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have a ILI210X based touchscreen
+	  controller. This driver supports models ILI2102,
+	  ILI2102s, ILI2103, ILI2103s and ILI2105.
+	  Such kind of chipsets can be found in Amazon Kindle Fire
+	  touchscreens.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ili210x.
+
+config TOUCHSCREEN_IPROC
+	tristate "IPROC touch panel driver support"
+	depends on ARCH_BCM_IPROC || COMPILE_TEST
+	help
+	  Say Y here if you want to add support for the IPROC touch
+	  controller to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bcm_iproc_tsc.
+
+config TOUCHSCREEN_S3C2410
+	tristate "Samsung S3C2410/generic touchscreen input driver"
+	depends on ARCH_S3C24XX || SAMSUNG_DEV_TS
+	select S3C_ADC
+	help
+	  Say Y here if you have the s3c2410 touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called s3c2410_ts.
+
+config TOUCHSCREEN_GUNZE
+	tristate "Gunze AHL-51S touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have the Gunze AHL-51 touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called gunze.
+
+config TOUCHSCREEN_ELAN
+	tristate "Elan eKTH I2C touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have an Elan eKTH I2C touchscreen
+	  connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called elants_i2c.
+
+config TOUCHSCREEN_ELO
+	tristate "Elo serial touchscreens"
+	select SERIO
+	help
+	  Say Y here if you have an Elo serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called elo.
+
+config TOUCHSCREEN_WACOM_W8001
+	tristate "Wacom W8001 penabled serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have an Wacom W8001 penabled serial touchscreen
+	  connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wacom_w8001.
+
+config TOUCHSCREEN_WACOM_I2C
+	tristate "Wacom Tablet support (I2C)"
+	depends on I2C
+	help
+	  Say Y here if you want to use the I2C version of the Wacom
+	  Pen Tablet.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module
+	  will be called wacom_i2c.
+
+config TOUCHSCREEN_LPC32XX
+	tristate "LPC32XX touchscreen controller"
+	depends on ARCH_LPC32XX
+	help
+	  Say Y here if you have a LPC32XX device and want
+	  to support the built-in touchscreen.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called lpc32xx_ts.
+
+config TOUCHSCREEN_MAX11801
+	tristate "MAX11801 based touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a MAX11801 based touchscreen
+	  controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called max11801_ts.
+
+config TOUCHSCREEN_MCS5000
+	tristate "MELFAS MCS-5000 touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have the MELFAS MCS-5000 touchscreen controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mcs5000_ts.
+
+config TOUCHSCREEN_MMS114
+	tristate "MELFAS MMS114 touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have the MELFAS MMS114 touchscreen controller
+	  chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mms114.
+
+config TOUCHSCREEN_MTOUCH
+	tristate "MicroTouch serial touchscreens"
+	select SERIO
+	help
+	  Say Y here if you have a MicroTouch (3M) serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mtouch.
+
+config TOUCHSCREEN_IMX6UL_TSC
+	tristate "Freescale i.MX6UL touchscreen controller"
+	depends on (OF && GPIOLIB) || COMPILE_TEST
+	help
+	  Say Y here if you have a Freescale i.MX6UL, and want to
+	  use the internal touchscreen controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called imx6ul_tsc.
+
+config TOUCHSCREEN_INEXIO
+	tristate "iNexio serial touchscreens"
+	select SERIO
+	help
+	  Say Y here if you have an iNexio serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called inexio.
+
+config TOUCHSCREEN_INTEL_MID
+	tristate "Intel MID platform resistive touchscreen"
+	depends on INTEL_SCU_IPC
+	help
+	  Say Y here if you have a Intel MID based touchscreen in
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called intel_mid_touch.
+
+config TOUCHSCREEN_MK712
+	tristate "ICS MicroClock MK712 touchscreen"
+	help
+	  Say Y here if you have the ICS MicroClock MK712 touchscreen
+	  controller chip in your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mk712.
+
+config TOUCHSCREEN_HP600
+	tristate "HP Jornada 6xx touchscreen"
+	depends on SH_HP6XX && SH_ADC
+	help
+	  Say Y here if you have a HP Jornada 620/660/680/690 and want to
+          support the built-in touchscreen.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called hp680_ts_input.
+
+config TOUCHSCREEN_HP7XX
+	tristate "HP Jornada 7xx touchscreen"
+	depends on SA1100_JORNADA720_SSP
+	help
+	  Say Y here if you have a HP Jornada 710/720/728 and want
+	  to support the built-in touchscreen.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called jornada720_ts.
+
+config TOUCHSCREEN_IPAQ_MICRO
+	tristate "HP iPAQ Atmel Micro ASIC touchscreen"
+	depends on MFD_IPAQ_MICRO
+	help
+	  Say Y here to enable support for the touchscreen attached to
+	  the Atmel Micro peripheral controller on iPAQ h3100/h3600/h3700
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ipaq-micro-ts.
+
+config TOUCHSCREEN_HTCPEN
+	tristate "HTC Shift X9500 touchscreen"
+	depends on ISA
+	help
+	  Say Y here if you have an HTC Shift UMPC also known as HTC X9500
+	  Clio / Shangrila and want to support the built-in touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called htcpen.
+
+config TOUCHSCREEN_PENMOUNT
+	tristate "Penmount serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Penmount serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called penmount.
+
+config TOUCHSCREEN_EDT_FT5X06
+	tristate "EDT FocalTech FT5x06 I2C Touchscreen support"
+	depends on I2C
+	help
+	  Say Y here if you have an EDT "Polytouch" touchscreen based
+	  on the FocalTech FT5x06 family of controllers connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called edt-ft5x06.
+
+config TOUCHSCREEN_MIGOR
+	tristate "Renesas MIGO-R touchscreen"
+	depends on SH_MIGOR && I2C
+	help
+	  Say Y here to enable MIGO-R touchscreen support.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called migor_ts.
+
+config TOUCHSCREEN_TOUCHRIGHT
+	tristate "Touchright serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Touchright serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called touchright.
+
+config TOUCHSCREEN_TOUCHWIN
+	tristate "Touchwin serial touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Touchwin serial touchscreen connected to
+	  your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called touchwin.
+
+config TOUCHSCREEN_TI_AM335X_TSC
+	tristate "TI Touchscreen Interface"
+	depends on MFD_TI_AM335X_TSCADC
+	help
+	  Say Y here if you have 4/5/8 wire touchscreen controller
+	  to be connected to the ADC controller on your TI AM335x SoC.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ti_am335x_tsc.
+
+config TOUCHSCREEN_UCB1400
+	tristate "Philips UCB1400 touchscreen"
+	depends on AC97_BUS
+	depends on UCB1400_CORE
+	help
+	  This enables support for the Philips UCB1400 touchscreen interface.
+	  The UCB1400 is an AC97 audio codec.  The touchscreen interface
+	  will be initialized only after the ALSA subsystem has been
+	  brought up and the UCB1400 detected.  You therefore have to
+	  configure ALSA support as well (either built-in or modular,
+	  independently of whether this driver is itself built-in or
+	  modular) for this driver to work.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called ucb1400_ts.
+
+config TOUCHSCREEN_PIXCIR
+	tristate "PIXCIR I2C touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a pixcir i2c touchscreen
+	  controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pixcir_i2c_ts.
+
+config TOUCHSCREEN_WDT87XX_I2C
+	tristate "Weida HiTech I2C touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have a Weida WDT87XX I2C touchscreen
+	  connected to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wdt87xx_i2c.
+
+config TOUCHSCREEN_WM831X
+	tristate "Support for WM831x touchscreen controllers"
+	depends on MFD_WM831X
+	help
+	  This enables support for the touchscreen controller on the WM831x
+	  series of PMICs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wm831x-ts.
+
+config TOUCHSCREEN_WM97XX
+	tristate "Support for WM97xx AC97 touchscreen controllers"
+	depends on AC97_BUS
+	help
+	  Say Y here if you have a Wolfson Microelectronics WM97xx
+	  touchscreen connected to your system. Note that this option
+	  only enables core driver, you will also need to select
+	  support for appropriate chip below.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called wm97xx-ts.
+
+config TOUCHSCREEN_WM9705
+	bool "WM9705 Touchscreen interface support"
+	depends on TOUCHSCREEN_WM97XX
+	default y
+	help
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9705 touchscreen controller.
+
+config TOUCHSCREEN_WM9712
+	bool "WM9712 Touchscreen interface support"
+	depends on TOUCHSCREEN_WM97XX
+	default y
+	help
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9712 touchscreen controller.
+
+config TOUCHSCREEN_WM9713
+	bool "WM9713 Touchscreen interface support"
+	depends on TOUCHSCREEN_WM97XX
+	default y
+	help
+	  Say Y here to enable support for the Wolfson Microelectronics
+	  WM9713 touchscreen controller.
+
+config TOUCHSCREEN_WM97XX_ATMEL
+	tristate "WM97xx Atmel accelerated touch"
+	depends on TOUCHSCREEN_WM97XX && AVR32
+	help
+	  Say Y here for support for streaming mode with WM97xx touchscreens
+	  on Atmel AT91 or AVR32 systems with an AC97C module.
+
+	  Be aware that this will use channel B in the controller for
+	  streaming data, this must not conflict with other AC97C drivers.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the module will
+	  be called atmel-wm97xx.
+
+config TOUCHSCREEN_WM97XX_MAINSTONE
+	tristate "WM97xx Mainstone/Palm accelerated touch"
+	depends on TOUCHSCREEN_WM97XX && ARCH_PXA
+	help
+	  Say Y here for support for streaming mode with WM97xx touchscreens
+	  on Mainstone, Palm Tungsten T5, TX and LifeDrive systems.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mainstone-wm97xx.
+
+config TOUCHSCREEN_WM97XX_ZYLONITE
+	tristate "Zylonite accelerated touch"
+	depends on TOUCHSCREEN_WM97XX && MACH_ZYLONITE
+	select TOUCHSCREEN_WM9713
+	help
+	  Say Y here for support for streaming mode with the touchscreen
+	  on Zylonite systems.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zylonite-wm97xx.
+
+config TOUCHSCREEN_USB_COMPOSITE
+	tristate "USB Touchscreen Driver"
+	depends on USB_ARCH_HAS_HCD
+	select USB
+	help
+	  USB Touchscreen driver for:
+	  - eGalax Touchkit USB (also includes eTurboTouch CT-410/510/700)
+	  - PanJit TouchSet USB
+	  - 3M MicroTouch USB (EX II series)
+	  - ITM
+	  - some other eTurboTouch
+	  - Gunze AHL61
+	  - DMC TSC-10/25
+	  - IRTOUCHSYSTEMS/UNITOP
+	  - IdealTEK URTC1000
+	  - GoTop Super_Q2/GogoPen/PenPower tablets
+	  - JASTEC USB Touch Controller/DigiTech DTR-02U
+	  - Zytronic controllers
+	  - Elo TouchSystems 2700 IntelliTouch
+	  - EasyTouch USB Touch Controller from Data Modul
+	  - e2i (Mimo monitors)
+
+	  Have a look at <http://linux.chapter7.ch/touchkit/> for
+	  a usage description and the required user-space stuff.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called usbtouchscreen.
+
+config TOUCHSCREEN_MC13783
+	tristate "Freescale MC13783 touchscreen input driver"
+	depends on MFD_MC13XXX
+	help
+	  Say Y here if you have an Freescale MC13783 PMIC on your
+	  board and want to use its touchscreen
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called mc13783_ts.
+
+config TOUCHSCREEN_USB_EGALAX
+	default y
+	bool "eGalax, eTurboTouch CT-410/510/700 device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_PANJIT
+	default y
+	bool "PanJit device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_3M
+	default y
+	bool "3M/Microtouch EX II series device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ITM
+	default y
+	bool "ITM device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ETURBO
+	default y
+	bool "eTurboTouch (non-eGalax compatible) device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_GUNZE
+	default y
+	bool "Gunze AHL61 device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_DMC_TSC10
+	default y
+	bool "DMC TSC-10/25 device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_IRTOUCH
+	default y
+	bool "IRTOUCHSYSTEMS/UNITOP device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_IDEALTEK
+	default y
+	bool "IdealTEK URTC1000 device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_GENERAL_TOUCH
+	default y
+	bool "GeneralTouch Touchscreen device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_GOTOP
+	default y
+	bool "GoTop Super_Q2/GogoPen/PenPower tablet device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_JASTEC
+	default y
+	bool "JASTEC/DigiTech DTR-02U USB touch controller device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ELO
+	default y
+	bool "Elo TouchSystems 2700 IntelliTouch controller device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_E2I
+	default y
+	bool "e2i Touchscreen controller (e.g. from Mimo 740)" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ZYTRONIC
+	default y
+	bool "Zytronic controller" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_ETT_TC45USB
+	default y
+	bool "ET&T USB series TC4UM/TC5UH touchscreen controller support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_NEXIO
+	default y
+	bool "NEXIO/iNexio device support" if EXPERT
+	depends on TOUCHSCREEN_USB_COMPOSITE
+
+config TOUCHSCREEN_USB_EASYTOUCH
+	default y
+	bool "EasyTouch USB Touch controller device support" if EMBEDDED
+	depends on TOUCHSCREEN_USB_COMPOSITE
+	help
+	  Say Y here if you have an EasyTouch USB Touch controller.
+	  If unsure, say N.
+
+config TOUCHSCREEN_TOUCHIT213
+	tristate "Sahara TouchIT-213 touchscreen"
+	select SERIO
+	help
+	  Say Y here if you have a Sahara TouchIT-213 Tablet PC.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called touchit213.
+
+config TOUCHSCREEN_TSC_SERIO
+	tristate "TSC-10/25/40 serial touchscreen support"
+	select SERIO
+	help
+	  Say Y here if you have a TSC-10, 25 or 40 serial touchscreen connected
+	  to your system.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tsc40.
+
+config TOUCHSCREEN_TSC200X_CORE
+	tristate
+
+config TOUCHSCREEN_TSC2004
+	tristate "TSC2004 based touchscreens"
+	depends on I2C
+	select REGMAP_I2C
+	select TOUCHSCREEN_TSC200X_CORE
+	help
+	  Say Y here if you have a TSC2004 based touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tsc2004.
+
+config TOUCHSCREEN_TSC2005
+	tristate "TSC2005 based touchscreens"
+	depends on SPI_MASTER
+	select REGMAP_SPI
+	select TOUCHSCREEN_TSC200X_CORE
+	help
+	  Say Y here if you have a TSC2005 based touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tsc2005.
+
+config TOUCHSCREEN_TSC2007
+	tristate "TSC2007 based touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a TSC2007 based touchscreen.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tsc2007.
+
+config TOUCHSCREEN_W90X900
+	tristate "W90P910 touchscreen driver"
+	depends on ARCH_W90X900
+	help
+	  Say Y here if you have a W90P910 based touchscreen.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called w90p910_ts.
+
+config TOUCHSCREEN_PCAP
+	tristate "Motorola PCAP touchscreen"
+	depends on EZX_PCAP
+	help
+	  Say Y here if you have a Motorola EZX telephone and
+	  want to enable support for the built-in touchscreen.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called pcap_ts.
+
+config TOUCHSCREEN_ST1232
+	tristate "Sitronix ST1232 touchscreen controllers"
+	depends on I2C
+	help
+	  Say Y here if you want to support Sitronix ST1232
+	  touchscreen controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called st1232_ts.
+
+config TOUCHSCREEN_STMPE
+	tristate "STMicroelectronics STMPE touchscreens"
+	depends on MFD_STMPE
+	depends on (OF || COMPILE_TEST)
+	help
+	  Say Y here if you want support for STMicroelectronics
+	  STMPE touchscreen controllers.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stmpe-ts.
+
+config TOUCHSCREEN_SUN4I
+	tristate "Allwinner sun4i resistive touchscreen controller support"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on HWMON
+	depends on THERMAL || !THERMAL_OF
+	help
+	  This selects support for the resistive touchscreen controller
+	  found on Allwinner sunxi SoCs.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sun4i-ts.
+
+config TOUCHSCREEN_SUR40
+	tristate "Samsung SUR40 (Surface 2.0/PixelSense) touchscreen"
+	depends on USB && MEDIA_USB_SUPPORT && HAS_DMA
+	depends on VIDEO_V4L2
+	select INPUT_POLLDEV
+	select VIDEOBUF2_DMA_SG
+	help
+	  Say Y here if you want support for the Samsung SUR40 touchscreen
+	  (also known as Microsoft Surface 2.0 or Microsoft PixelSense).
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sur40.
+
+config TOUCHSCREEN_SX8654
+	tristate "Semtech SX8654 touchscreen"
+	depends on I2C
+	help
+	  Say Y here if you have a Semtech SX8654 touchscreen controller.
+
+	  If unsure, say N
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called sx8654.
+
+config TOUCHSCREEN_TPS6507X
+	tristate "TPS6507x based touchscreens"
+	depends on I2C
+	select INPUT_POLLDEV
+	help
+	  Say Y here if you have a TPS6507x based touchscreen
+	  controller.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called tps6507x_ts.
+
+config TOUCHSCREEN_ZFORCE
+	tristate "Neonode zForce infrared touchscreens"
+	depends on I2C
+	depends on GPIOLIB || COMPILE_TEST
+	help
+	  Say Y here if you have a touchscreen using the zforce
+	  infraread technology from Neonode.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called zforce_ts.
+
+config TOUCHSCREEN_COLIBRI_VF50
+	tristate "Toradex Colibri on board touchscreen driver"
+	depends on GPIOLIB && IIO && VF610_ADC
+	help
+	  Say Y here if you have a Colibri VF50 and plan to use
+	  the on-board provided 4-wire touchscreen driver.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called colibri_vf50_ts.
+
+config TOUCHSCREEN_ROHM_BU21023
+	tristate "ROHM BU21023/24 Dual touch support resistive touchscreens"
+	depends on I2C
+	help
+	  Say Y here if you have a touchscreen using ROHM BU21023/24.
+
+	  If unsure, say N.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called bu21023_ts.
+
+endif
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
new file mode 100644
index 0000000..cbaa6ab
--- /dev/null
+++ b/drivers/input/touchscreen/Makefile
@@ -0,0 +1,93 @@
+#
+# Makefile for the touchscreen drivers.
+#
+
+# Each configuration option enables a list of files.
+
+wm97xx-ts-y := wm97xx-core.o
+
+obj-$(CONFIG_TOUCHSCREEN_PROPERTIES)	+= of_touchscreen.o
+obj-$(CONFIG_TOUCHSCREEN_88PM860X)	+= 88pm860x-ts.o
+obj-$(CONFIG_TOUCHSCREEN_AD7877)	+= ad7877.o
+obj-$(CONFIG_TOUCHSCREEN_AD7879)	+= ad7879.o
+obj-$(CONFIG_TOUCHSCREEN_AD7879_I2C)	+= ad7879-i2c.o
+obj-$(CONFIG_TOUCHSCREEN_AD7879_SPI)	+= ad7879-spi.o
+obj-$(CONFIG_TOUCHSCREEN_ADS7846)	+= ads7846.o
+obj-$(CONFIG_TOUCHSCREEN_AR1021_I2C)	+= ar1021_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_ATMEL_MXT)	+= atmel_mxt_ts.o
+obj-$(CONFIG_TOUCHSCREEN_AUO_PIXCIR)	+= auo-pixcir-ts.o
+obj-$(CONFIG_TOUCHSCREEN_BU21013)	+= bu21013_ts.o
+obj-$(CONFIG_TOUCHSCREEN_CHIPONE_ICN8318)	+= chipone_icn8318.o
+obj-$(CONFIG_TOUCHSCREEN_CY8CTMG110)	+= cy8ctmg110_ts.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_CORE)	+= cyttsp_core.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_I2C)	+= cyttsp_i2c.o cyttsp_i2c_common.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP_SPI)	+= cyttsp_spi.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_CORE)	+= cyttsp4_core.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_I2C)	+= cyttsp4_i2c.o cyttsp_i2c_common.o
+obj-$(CONFIG_TOUCHSCREEN_CYTTSP4_SPI)	+= cyttsp4_spi.o
+obj-$(CONFIG_TOUCHSCREEN_DA9034)	+= da9034-ts.o
+obj-$(CONFIG_TOUCHSCREEN_DA9052)	+= da9052_tsi.o
+obj-$(CONFIG_TOUCHSCREEN_DYNAPRO)	+= dynapro.o
+obj-$(CONFIG_TOUCHSCREEN_EDT_FT5X06)	+= edt-ft5x06.o
+obj-$(CONFIG_TOUCHSCREEN_HAMPSHIRE)	+= hampshire.o
+obj-$(CONFIG_TOUCHSCREEN_GUNZE)		+= gunze.o
+obj-$(CONFIG_TOUCHSCREEN_EETI)		+= eeti_ts.o
+obj-$(CONFIG_TOUCHSCREEN_ELAN)		+= elants_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_ELO)		+= elo.o
+obj-$(CONFIG_TOUCHSCREEN_EGALAX)	+= egalax_ts.o
+obj-$(CONFIG_TOUCHSCREEN_FT6236)	+= ft6236.o
+obj-$(CONFIG_TOUCHSCREEN_FUJITSU)	+= fujitsu_ts.o
+obj-$(CONFIG_TOUCHSCREEN_GOODIX)	+= goodix.o
+obj-$(CONFIG_TOUCHSCREEN_ILI210X)	+= ili210x.o
+obj-$(CONFIG_TOUCHSCREEN_IMX6UL_TSC)	+= imx6ul_tsc.o
+obj-$(CONFIG_TOUCHSCREEN_INEXIO)	+= inexio.o
+obj-$(CONFIG_TOUCHSCREEN_INTEL_MID)	+= intel-mid-touch.o
+obj-$(CONFIG_TOUCHSCREEN_IPROC)		+= bcm_iproc_tsc.o
+obj-$(CONFIG_TOUCHSCREEN_LPC32XX)	+= lpc32xx_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MAX11801)	+= max11801_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MC13783)	+= mc13783_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MCS5000)	+= mcs5000_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MIGOR)		+= migor_ts.o
+obj-$(CONFIG_TOUCHSCREEN_MMS114)	+= mms114.o
+obj-$(CONFIG_TOUCHSCREEN_MTOUCH)	+= mtouch.o
+obj-$(CONFIG_TOUCHSCREEN_MK712)		+= mk712.o
+obj-$(CONFIG_TOUCHSCREEN_HP600)		+= hp680_ts_input.o
+obj-$(CONFIG_TOUCHSCREEN_HP7XX)		+= jornada720_ts.o
+obj-$(CONFIG_TOUCHSCREEN_IPAQ_MICRO)	+= ipaq-micro-ts.o
+obj-$(CONFIG_TOUCHSCREEN_HTCPEN)	+= htcpen.o
+obj-$(CONFIG_TOUCHSCREEN_USB_COMPOSITE)	+= usbtouchscreen.o
+obj-$(CONFIG_TOUCHSCREEN_PCAP)		+= pcap_ts.o
+obj-$(CONFIG_TOUCHSCREEN_PENMOUNT)	+= penmount.o
+obj-$(CONFIG_TOUCHSCREEN_PIXCIR)	+= pixcir_i2c_ts.o
+obj-$(CONFIG_TOUCHSCREEN_S3C2410)	+= s3c2410_ts.o
+obj-$(CONFIG_TOUCHSCREEN_ST1232)	+= st1232.o
+obj-$(CONFIG_TOUCHSCREEN_STMPE)		+= stmpe-ts.o
+obj-$(CONFIG_TOUCHSCREEN_SUN4I)		+= sun4i-ts.o
+obj-$(CONFIG_TOUCHSCREEN_SUR40)		+= sur40.o
+obj-$(CONFIG_TOUCHSCREEN_TI_AM335X_TSC)	+= ti_am335x_tsc.o
+obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213)	+= touchit213.o
+obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT)	+= touchright.o
+obj-$(CONFIG_TOUCHSCREEN_TOUCHWIN)	+= touchwin.o
+obj-$(CONFIG_TOUCHSCREEN_TSC_SERIO)	+= tsc40.o
+obj-$(CONFIG_TOUCHSCREEN_TSC200X_CORE)	+= tsc200x-core.o
+obj-$(CONFIG_TOUCHSCREEN_TSC2004)	+= tsc2004.o
+obj-$(CONFIG_TOUCHSCREEN_TSC2005)	+= tsc2005.o
+obj-$(CONFIG_TOUCHSCREEN_TSC2007)	+= tsc2007.o
+obj-$(CONFIG_TOUCHSCREEN_UCB1400)	+= ucb1400_ts.o
+obj-$(CONFIG_TOUCHSCREEN_WACOM_W8001)	+= wacom_w8001.o
+obj-$(CONFIG_TOUCHSCREEN_WACOM_I2C)	+= wacom_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_WDT87XX_I2C)	+= wdt87xx_i2c.o
+obj-$(CONFIG_TOUCHSCREEN_WM831X)	+= wm831x-ts.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX)	+= wm97xx-ts.o
+wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9705)	+= wm9705.o
+wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9712)	+= wm9712.o
+wm97xx-ts-$(CONFIG_TOUCHSCREEN_WM9713)	+= wm9713.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX_ATMEL)	+= atmel-wm97xx.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE)	+= mainstone-wm97xx.o
+obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE)	+= zylonite-wm97xx.o
+obj-$(CONFIG_TOUCHSCREEN_W90X900)	+= w90p910_ts.o
+obj-$(CONFIG_TOUCHSCREEN_SX8654)	+= sx8654.o
+obj-$(CONFIG_TOUCHSCREEN_TPS6507X)	+= tps6507x-ts.o
+obj-$(CONFIG_TOUCHSCREEN_ZFORCE)	+= zforce_ts.o
+obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50)	+= colibri-vf50-ts.o
+obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023)	+= rohm_bu21023.o
diff --git a/drivers/input/touchscreen/ad7877.c b/drivers/input/touchscreen/ad7877.c
new file mode 100644
index 0000000..9c250ae
--- /dev/null
+++ b/drivers/input/touchscreen/ad7877.c
@@ -0,0 +1,857 @@
+/*
+ * Copyright (C) 2006-2008 Michael Hennerich, Analog Devices Inc.
+ *
+ * Description:	AD7877 based touchscreen, sensor (ADCs), DAC and GPIO driver
+ * Based on:	ads7846.c
+ *
+ * Bugs:        Enter bugs at http://blackfin.uclinux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, see the file COPYING, or write
+ * to the Free Software Foundation, Inc.,
+ * 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+ *
+ * History:
+ * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
+ *
+ * Using code from:
+ *  - corgi_ts.c
+ *	Copyright (C) 2004-2005 Richard Purdie
+ *  - omap_ts.[hc], ads7846.h, ts_osk.c
+ *	Copyright (C) 2002 MontaVista Software
+ *	Copyright (C) 2004 Texas Instruments
+ *	Copyright (C) 2005 Dirk Behme
+ */
+
+
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ad7877.h>
+#include <linux/module.h>
+#include <asm/irq.h>
+
+#define	TS_PEN_UP_TIMEOUT	msecs_to_jiffies(100)
+
+#define MAX_SPI_FREQ_HZ			20000000
+#define	MAX_12BIT			((1<<12)-1)
+
+#define AD7877_REG_ZEROS			0
+#define AD7877_REG_CTRL1			1
+#define AD7877_REG_CTRL2			2
+#define AD7877_REG_ALERT			3
+#define AD7877_REG_AUX1HIGH			4
+#define AD7877_REG_AUX1LOW			5
+#define AD7877_REG_BAT1HIGH			6
+#define AD7877_REG_BAT1LOW			7
+#define AD7877_REG_BAT2HIGH			8
+#define AD7877_REG_BAT2LOW			9
+#define AD7877_REG_TEMP1HIGH			10
+#define AD7877_REG_TEMP1LOW			11
+#define AD7877_REG_SEQ0				12
+#define AD7877_REG_SEQ1				13
+#define AD7877_REG_DAC				14
+#define AD7877_REG_NONE1			15
+#define AD7877_REG_EXTWRITE			15
+#define AD7877_REG_XPLUS			16
+#define AD7877_REG_YPLUS			17
+#define AD7877_REG_Z2				18
+#define AD7877_REG_aux1				19
+#define AD7877_REG_aux2				20
+#define AD7877_REG_aux3				21
+#define AD7877_REG_bat1				22
+#define AD7877_REG_bat2				23
+#define AD7877_REG_temp1			24
+#define AD7877_REG_temp2			25
+#define AD7877_REG_Z1				26
+#define AD7877_REG_GPIOCTRL1			27
+#define AD7877_REG_GPIOCTRL2			28
+#define AD7877_REG_GPIODATA			29
+#define AD7877_REG_NONE2			30
+#define AD7877_REG_NONE3			31
+
+#define AD7877_SEQ_YPLUS_BIT			(1<<11)
+#define AD7877_SEQ_XPLUS_BIT			(1<<10)
+#define AD7877_SEQ_Z2_BIT			(1<<9)
+#define AD7877_SEQ_AUX1_BIT			(1<<8)
+#define AD7877_SEQ_AUX2_BIT			(1<<7)
+#define AD7877_SEQ_AUX3_BIT			(1<<6)
+#define AD7877_SEQ_BAT1_BIT			(1<<5)
+#define AD7877_SEQ_BAT2_BIT			(1<<4)
+#define AD7877_SEQ_TEMP1_BIT			(1<<3)
+#define AD7877_SEQ_TEMP2_BIT			(1<<2)
+#define AD7877_SEQ_Z1_BIT			(1<<1)
+
+enum {
+	AD7877_SEQ_YPOS  = 0,
+	AD7877_SEQ_XPOS  = 1,
+	AD7877_SEQ_Z2    = 2,
+	AD7877_SEQ_AUX1  = 3,
+	AD7877_SEQ_AUX2  = 4,
+	AD7877_SEQ_AUX3  = 5,
+	AD7877_SEQ_BAT1  = 6,
+	AD7877_SEQ_BAT2  = 7,
+	AD7877_SEQ_TEMP1 = 8,
+	AD7877_SEQ_TEMP2 = 9,
+	AD7877_SEQ_Z1    = 10,
+	AD7877_NR_SENSE  = 11,
+};
+
+/* DAC Register Default RANGE 0 to Vcc, Volatge Mode, DAC On */
+#define AD7877_DAC_CONF			0x1
+
+/* If gpio3 is set AUX3/GPIO3 acts as GPIO Output */
+#define AD7877_EXTW_GPIO_3_CONF		0x1C4
+#define AD7877_EXTW_GPIO_DATA		0x200
+
+/* Control REG 2 */
+#define AD7877_TMR(x)			((x & 0x3) << 0)
+#define AD7877_REF(x)			((x & 0x1) << 2)
+#define AD7877_POL(x)			((x & 0x1) << 3)
+#define AD7877_FCD(x)			((x & 0x3) << 4)
+#define AD7877_PM(x)			((x & 0x3) << 6)
+#define AD7877_ACQ(x)			((x & 0x3) << 8)
+#define AD7877_AVG(x)			((x & 0x3) << 10)
+
+/* Control REG 1 */
+#define	AD7877_SER			(1 << 11)	/* non-differential */
+#define	AD7877_DFR			(0 << 11)	/* differential */
+
+#define AD7877_MODE_NOC  (0)	/* Do not convert */
+#define AD7877_MODE_SCC  (1)	/* Single channel conversion */
+#define AD7877_MODE_SEQ0 (2)	/* Sequence 0 in Slave Mode */
+#define AD7877_MODE_SEQ1 (3)	/* Sequence 1 in Master Mode */
+
+#define AD7877_CHANADD(x)		((x&0xF)<<7)
+#define AD7877_READADD(x)		((x)<<2)
+#define AD7877_WRITEADD(x)		((x)<<12)
+
+#define AD7877_READ_CHAN(x) (AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_SER | \
+		AD7877_MODE_SCC | AD7877_CHANADD(AD7877_REG_ ## x) | \
+		AD7877_READADD(AD7877_REG_ ## x))
+
+#define AD7877_MM_SEQUENCE (AD7877_SEQ_YPLUS_BIT | AD7877_SEQ_XPLUS_BIT | \
+		AD7877_SEQ_Z2_BIT | AD7877_SEQ_Z1_BIT)
+
+/*
+ * Non-touchscreen sensors only use single-ended conversions.
+ */
+
+struct ser_req {
+	u16			reset;
+	u16			ref_on;
+	u16			command;
+	struct spi_message	msg;
+	struct spi_transfer	xfer[6];
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	u16 sample ____cacheline_aligned;
+};
+
+struct ad7877 {
+	struct input_dev	*input;
+	char			phys[32];
+
+	struct spi_device	*spi;
+	u16			model;
+	u16			vref_delay_usecs;
+	u16			x_plate_ohms;
+	u16			pressure_max;
+
+	u16			cmd_crtl1;
+	u16			cmd_crtl2;
+	u16			cmd_dummy;
+	u16			dac;
+
+	u8			stopacq_polarity;
+	u8			first_conversion_delay;
+	u8			acquisition_time;
+	u8			averaging;
+	u8			pen_down_acc_interval;
+
+	struct spi_transfer	xfer[AD7877_NR_SENSE + 2];
+	struct spi_message	msg;
+
+	struct mutex		mutex;
+	bool			disabled;	/* P: mutex */
+	bool			gpio3;		/* P: mutex */
+	bool			gpio4;		/* P: mutex */
+
+	spinlock_t		lock;
+	struct timer_list	timer;		/* P: lock */
+
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	u16 conversion_data[AD7877_NR_SENSE] ____cacheline_aligned;
+};
+
+static bool gpio3;
+module_param(gpio3, bool, 0);
+MODULE_PARM_DESC(gpio3, "If gpio3 is set to 1 AUX3 acts as GPIO3");
+
+static int ad7877_read(struct spi_device *spi, u16 reg)
+{
+	struct ser_req *req;
+	int status, ret;
+
+	req = kzalloc(sizeof *req, GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	spi_message_init(&req->msg);
+
+	req->command = (u16) (AD7877_WRITEADD(AD7877_REG_CTRL1) |
+			AD7877_READADD(reg));
+	req->xfer[0].tx_buf = &req->command;
+	req->xfer[0].len = 2;
+	req->xfer[0].cs_change = 1;
+
+	req->xfer[1].rx_buf = &req->sample;
+	req->xfer[1].len = 2;
+
+	spi_message_add_tail(&req->xfer[0], &req->msg);
+	spi_message_add_tail(&req->xfer[1], &req->msg);
+
+	status = spi_sync(spi, &req->msg);
+	ret = status ? : req->sample;
+
+	kfree(req);
+
+	return ret;
+}
+
+static int ad7877_write(struct spi_device *spi, u16 reg, u16 val)
+{
+	struct ser_req *req;
+	int status;
+
+	req = kzalloc(sizeof *req, GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	spi_message_init(&req->msg);
+
+	req->command = (u16) (AD7877_WRITEADD(reg) | (val & MAX_12BIT));
+	req->xfer[0].tx_buf = &req->command;
+	req->xfer[0].len = 2;
+
+	spi_message_add_tail(&req->xfer[0], &req->msg);
+
+	status = spi_sync(spi, &req->msg);
+
+	kfree(req);
+
+	return status;
+}
+
+static int ad7877_read_adc(struct spi_device *spi, unsigned command)
+{
+	struct ad7877 *ts = spi_get_drvdata(spi);
+	struct ser_req *req;
+	int status;
+	int sample;
+	int i;
+
+	req = kzalloc(sizeof *req, GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	spi_message_init(&req->msg);
+
+	/* activate reference, so it has time to settle; */
+	req->ref_on = AD7877_WRITEADD(AD7877_REG_CTRL2) |
+			 AD7877_POL(ts->stopacq_polarity) |
+			 AD7877_AVG(0) | AD7877_PM(2) | AD7877_TMR(0) |
+			 AD7877_ACQ(ts->acquisition_time) | AD7877_FCD(0);
+
+	req->reset = AD7877_WRITEADD(AD7877_REG_CTRL1) | AD7877_MODE_NOC;
+
+	req->command = (u16) command;
+
+	req->xfer[0].tx_buf = &req->reset;
+	req->xfer[0].len = 2;
+	req->xfer[0].cs_change = 1;
+
+	req->xfer[1].tx_buf = &req->ref_on;
+	req->xfer[1].len = 2;
+	req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+	req->xfer[1].cs_change = 1;
+
+	req->xfer[2].tx_buf = &req->command;
+	req->xfer[2].len = 2;
+	req->xfer[2].delay_usecs = ts->vref_delay_usecs;
+	req->xfer[2].cs_change = 1;
+
+	req->xfer[3].rx_buf = &req->sample;
+	req->xfer[3].len = 2;
+	req->xfer[3].cs_change = 1;
+
+	req->xfer[4].tx_buf = &ts->cmd_crtl2;	/*REF OFF*/
+	req->xfer[4].len = 2;
+	req->xfer[4].cs_change = 1;
+
+	req->xfer[5].tx_buf = &ts->cmd_crtl1;	/*DEFAULT*/
+	req->xfer[5].len = 2;
+
+	/* group all the transfers together, so we can't interfere with
+	 * reading touchscreen state; disable penirq while sampling
+	 */
+	for (i = 0; i < 6; i++)
+		spi_message_add_tail(&req->xfer[i], &req->msg);
+
+	status = spi_sync(spi, &req->msg);
+	sample = req->sample;
+
+	kfree(req);
+
+	return status ? : sample;
+}
+
+static int ad7877_process_data(struct ad7877 *ts)
+{
+	struct input_dev *input_dev = ts->input;
+	unsigned Rt;
+	u16 x, y, z1, z2;
+
+	x = ts->conversion_data[AD7877_SEQ_XPOS] & MAX_12BIT;
+	y = ts->conversion_data[AD7877_SEQ_YPOS] & MAX_12BIT;
+	z1 = ts->conversion_data[AD7877_SEQ_Z1] & MAX_12BIT;
+	z2 = ts->conversion_data[AD7877_SEQ_Z2] & MAX_12BIT;
+
+	/*
+	 * The samples processed here are already preprocessed by the AD7877.
+	 * The preprocessing function consists of an averaging filter.
+	 * The combination of 'first conversion delay' and averaging provides a robust solution,
+	 * discarding the spurious noise in the signal and keeping only the data of interest.
+	 * The size of the averaging filter is programmable. (dev.platform_data, see linux/spi/ad7877.h)
+	 * Other user-programmable conversion controls include variable acquisition time,
+	 * and first conversion delay. Up to 16 averages can be taken per conversion.
+	 */
+
+	if (likely(x && z1)) {
+		/* compute touch pressure resistance using equation #1 */
+		Rt = (z2 - z1) * x * ts->x_plate_ohms;
+		Rt /= z1;
+		Rt = (Rt + 2047) >> 12;
+
+		/*
+		 * Sample found inconsistent, pressure is beyond
+		 * the maximum. Don't report it to user space.
+		 */
+		if (Rt > ts->pressure_max)
+			return -EINVAL;
+
+		if (!timer_pending(&ts->timer))
+			input_report_key(input_dev, BTN_TOUCH, 1);
+
+		input_report_abs(input_dev, ABS_X, x);
+		input_report_abs(input_dev, ABS_Y, y);
+		input_report_abs(input_dev, ABS_PRESSURE, Rt);
+		input_sync(input_dev);
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static inline void ad7877_ts_event_release(struct ad7877 *ts)
+{
+	struct input_dev *input_dev = ts->input;
+
+	input_report_abs(input_dev, ABS_PRESSURE, 0);
+	input_report_key(input_dev, BTN_TOUCH, 0);
+	input_sync(input_dev);
+}
+
+static void ad7877_timer(unsigned long handle)
+{
+	struct ad7877 *ts = (void *)handle;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ts->lock, flags);
+	ad7877_ts_event_release(ts);
+	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+static irqreturn_t ad7877_irq(int irq, void *handle)
+{
+	struct ad7877 *ts = handle;
+	unsigned long flags;
+	int error;
+
+	error = spi_sync(ts->spi, &ts->msg);
+	if (error) {
+		dev_err(&ts->spi->dev, "spi_sync --> %d\n", error);
+		goto out;
+	}
+
+	spin_lock_irqsave(&ts->lock, flags);
+	error = ad7877_process_data(ts);
+	if (!error)
+		mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
+	spin_unlock_irqrestore(&ts->lock, flags);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static void ad7877_disable(struct ad7877 *ts)
+{
+	mutex_lock(&ts->mutex);
+
+	if (!ts->disabled) {
+		ts->disabled = true;
+		disable_irq(ts->spi->irq);
+
+		if (del_timer_sync(&ts->timer))
+			ad7877_ts_event_release(ts);
+	}
+
+	/*
+	 * We know the chip's in lowpower mode since we always
+	 * leave it that way after every request
+	 */
+
+	mutex_unlock(&ts->mutex);
+}
+
+static void ad7877_enable(struct ad7877 *ts)
+{
+	mutex_lock(&ts->mutex);
+
+	if (ts->disabled) {
+		ts->disabled = false;
+		enable_irq(ts->spi->irq);
+	}
+
+	mutex_unlock(&ts->mutex);
+}
+
+#define SHOW(name) static ssize_t \
+name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct ad7877 *ts = dev_get_drvdata(dev); \
+	ssize_t v = ad7877_read_adc(ts->spi, \
+			AD7877_READ_CHAN(name)); \
+	if (v < 0) \
+		return v; \
+	return sprintf(buf, "%u\n", (unsigned) v); \
+} \
+static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
+
+SHOW(aux1)
+SHOW(aux2)
+SHOW(aux3)
+SHOW(bat1)
+SHOW(bat2)
+SHOW(temp1)
+SHOW(temp2)
+
+static ssize_t ad7877_disable_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ad7877 *ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ad7877_disable_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ad7877 *ts = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	if (val)
+		ad7877_disable(ts);
+	else
+		ad7877_enable(ts);
+
+	return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ad7877_disable_show, ad7877_disable_store);
+
+static ssize_t ad7877_dac_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ad7877 *ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->dac);
+}
+
+static ssize_t ad7877_dac_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ad7877 *ts = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ts->mutex);
+	ts->dac = val & 0xFF;
+	ad7877_write(ts->spi, AD7877_REG_DAC, (ts->dac << 4) | AD7877_DAC_CONF);
+	mutex_unlock(&ts->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(dac, 0664, ad7877_dac_show, ad7877_dac_store);
+
+static ssize_t ad7877_gpio3_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ad7877 *ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->gpio3);
+}
+
+static ssize_t ad7877_gpio3_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ad7877 *ts = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ts->mutex);
+	ts->gpio3 = !!val;
+	ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA |
+		 (ts->gpio4 << 4) | (ts->gpio3 << 5));
+	mutex_unlock(&ts->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(gpio3, 0664, ad7877_gpio3_show, ad7877_gpio3_store);
+
+static ssize_t ad7877_gpio4_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ad7877 *ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->gpio4);
+}
+
+static ssize_t ad7877_gpio4_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ad7877 *ts = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	mutex_lock(&ts->mutex);
+	ts->gpio4 = !!val;
+	ad7877_write(ts->spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_DATA |
+		     (ts->gpio4 << 4) | (ts->gpio3 << 5));
+	mutex_unlock(&ts->mutex);
+
+	return count;
+}
+
+static DEVICE_ATTR(gpio4, 0664, ad7877_gpio4_show, ad7877_gpio4_store);
+
+static struct attribute *ad7877_attributes[] = {
+	&dev_attr_temp1.attr,
+	&dev_attr_temp2.attr,
+	&dev_attr_aux1.attr,
+	&dev_attr_aux2.attr,
+	&dev_attr_aux3.attr,
+	&dev_attr_bat1.attr,
+	&dev_attr_bat2.attr,
+	&dev_attr_disable.attr,
+	&dev_attr_dac.attr,
+	&dev_attr_gpio3.attr,
+	&dev_attr_gpio4.attr,
+	NULL
+};
+
+static umode_t ad7877_attr_is_visible(struct kobject *kobj,
+				     struct attribute *attr, int n)
+{
+	umode_t mode = attr->mode;
+
+	if (attr == &dev_attr_aux3.attr) {
+		if (gpio3)
+			mode = 0;
+	} else if (attr == &dev_attr_gpio3.attr) {
+		if (!gpio3)
+			mode = 0;
+	}
+
+	return mode;
+}
+
+static const struct attribute_group ad7877_attr_group = {
+	.is_visible	= ad7877_attr_is_visible,
+	.attrs		= ad7877_attributes,
+};
+
+static void ad7877_setup_ts_def_msg(struct spi_device *spi, struct ad7877 *ts)
+{
+	struct spi_message *m;
+	int i;
+
+	ts->cmd_crtl2 = AD7877_WRITEADD(AD7877_REG_CTRL2) |
+			AD7877_POL(ts->stopacq_polarity) |
+			AD7877_AVG(ts->averaging) | AD7877_PM(1) |
+			AD7877_TMR(ts->pen_down_acc_interval) |
+			AD7877_ACQ(ts->acquisition_time) |
+			AD7877_FCD(ts->first_conversion_delay);
+
+	ad7877_write(spi, AD7877_REG_CTRL2, ts->cmd_crtl2);
+
+	ts->cmd_crtl1 = AD7877_WRITEADD(AD7877_REG_CTRL1) |
+			AD7877_READADD(AD7877_REG_XPLUS-1) |
+			AD7877_MODE_SEQ1 | AD7877_DFR;
+
+	ad7877_write(spi, AD7877_REG_CTRL1, ts->cmd_crtl1);
+
+	ts->cmd_dummy = 0;
+
+	m = &ts->msg;
+
+	spi_message_init(m);
+
+	m->context = ts;
+
+	ts->xfer[0].tx_buf = &ts->cmd_crtl1;
+	ts->xfer[0].len = 2;
+	ts->xfer[0].cs_change = 1;
+
+	spi_message_add_tail(&ts->xfer[0], m);
+
+	ts->xfer[1].tx_buf = &ts->cmd_dummy; /* Send ZERO */
+	ts->xfer[1].len = 2;
+	ts->xfer[1].cs_change = 1;
+
+	spi_message_add_tail(&ts->xfer[1], m);
+
+	for (i = 0; i < AD7877_NR_SENSE; i++) {
+		ts->xfer[i + 2].rx_buf = &ts->conversion_data[AD7877_SEQ_YPOS + i];
+		ts->xfer[i + 2].len = 2;
+		if (i < (AD7877_NR_SENSE - 1))
+			ts->xfer[i + 2].cs_change = 1;
+		spi_message_add_tail(&ts->xfer[i + 2], m);
+	}
+}
+
+static int ad7877_probe(struct spi_device *spi)
+{
+	struct ad7877			*ts;
+	struct input_dev		*input_dev;
+	struct ad7877_platform_data	*pdata = dev_get_platdata(&spi->dev);
+	int				err;
+	u16				verify;
+
+	if (!spi->irq) {
+		dev_dbg(&spi->dev, "no IRQ?\n");
+		return -ENODEV;
+	}
+
+	if (!pdata) {
+		dev_dbg(&spi->dev, "no platform data?\n");
+		return -ENODEV;
+	}
+
+	/* don't exceed max specified SPI CLK frequency */
+	if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+		dev_dbg(&spi->dev, "SPI CLK %d Hz?\n",spi->max_speed_hz);
+		return -EINVAL;
+	}
+
+	spi->bits_per_word = 16;
+	err = spi_setup(spi);
+	if (err) {
+		dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n");
+		return err;
+	}
+
+	ts = kzalloc(sizeof(struct ad7877), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	spi_set_drvdata(spi, ts);
+	ts->spi = spi;
+	ts->input = input_dev;
+
+	setup_timer(&ts->timer, ad7877_timer, (unsigned long) ts);
+	mutex_init(&ts->mutex);
+	spin_lock_init(&ts->lock);
+
+	ts->model = pdata->model ? : 7877;
+	ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
+	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+	ts->pressure_max = pdata->pressure_max ? : ~0;
+
+	ts->stopacq_polarity = pdata->stopacq_polarity;
+	ts->first_conversion_delay = pdata->first_conversion_delay;
+	ts->acquisition_time = pdata->acquisition_time;
+	ts->averaging = pdata->averaging;
+	ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
+
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
+
+	input_dev->name = "AD7877 Touchscreen";
+	input_dev->phys = ts->phys;
+	input_dev->dev.parent = &spi->dev;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(ABS_X, input_dev->absbit);
+	__set_bit(ABS_Y, input_dev->absbit);
+	__set_bit(ABS_PRESSURE, input_dev->absbit);
+
+	input_set_abs_params(input_dev, ABS_X,
+			pdata->x_min ? : 0,
+			pdata->x_max ? : MAX_12BIT,
+			0, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			pdata->y_min ? : 0,
+			pdata->y_max ? : MAX_12BIT,
+			0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE,
+			pdata->pressure_min, pdata->pressure_max, 0, 0);
+
+	ad7877_write(spi, AD7877_REG_SEQ1, AD7877_MM_SEQUENCE);
+
+	verify = ad7877_read(spi, AD7877_REG_SEQ1);
+
+	if (verify != AD7877_MM_SEQUENCE){
+		dev_err(&spi->dev, "%s: Failed to probe %s\n",
+			dev_name(&spi->dev), input_dev->name);
+		err = -ENODEV;
+		goto err_free_mem;
+	}
+
+	if (gpio3)
+		ad7877_write(spi, AD7877_REG_EXTWRITE, AD7877_EXTW_GPIO_3_CONF);
+
+	ad7877_setup_ts_def_msg(spi, ts);
+
+	/* Request AD7877 /DAV GPIO interrupt */
+
+	err = request_threaded_irq(spi->irq, NULL, ad7877_irq,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   spi->dev.driver->name, ts);
+	if (err) {
+		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
+		goto err_free_mem;
+	}
+
+	err = sysfs_create_group(&spi->dev.kobj, &ad7877_attr_group);
+	if (err)
+		goto err_free_irq;
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_remove_attr_group;
+
+	return 0;
+
+err_remove_attr_group:
+	sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group);
+err_free_irq:
+	free_irq(spi->irq, ts);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+	return err;
+}
+
+static int ad7877_remove(struct spi_device *spi)
+{
+	struct ad7877 *ts = spi_get_drvdata(spi);
+
+	sysfs_remove_group(&spi->dev.kobj, &ad7877_attr_group);
+
+	ad7877_disable(ts);
+	free_irq(ts->spi->irq, ts);
+
+	input_unregister_device(ts->input);
+	kfree(ts);
+
+	dev_dbg(&spi->dev, "unregistered touchscreen\n");
+
+	return 0;
+}
+
+static int __maybe_unused ad7877_suspend(struct device *dev)
+{
+	struct ad7877 *ts = dev_get_drvdata(dev);
+
+	ad7877_disable(ts);
+
+	return 0;
+}
+
+static int __maybe_unused ad7877_resume(struct device *dev)
+{
+	struct ad7877 *ts = dev_get_drvdata(dev);
+
+	ad7877_enable(ts);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ad7877_pm, ad7877_suspend, ad7877_resume);
+
+static struct spi_driver ad7877_driver = {
+	.driver = {
+		.name	= "ad7877",
+		.pm	= &ad7877_pm,
+	},
+	.probe		= ad7877_probe,
+	.remove		= ad7877_remove,
+};
+
+module_spi_driver(ad7877_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7877 touchscreen Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ad7877");
diff --git a/drivers/input/touchscreen/ad7879-i2c.c b/drivers/input/touchscreen/ad7879-i2c.c
new file mode 100644
index 0000000..d66962c
--- /dev/null
+++ b/drivers/input/touchscreen/ad7879-i2c.c
@@ -0,0 +1,108 @@
+/*
+ * AD7879-1/AD7889-1 touchscreen (I2C bus)
+ *
+ * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_I2C */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/pm.h>
+
+#include "ad7879.h"
+
+#define AD7879_DEVID		0x79	/* AD7879-1/AD7889-1 */
+
+/* All registers are word-sized.
+ * AD7879 uses a high-byte first convention.
+ */
+static int ad7879_i2c_read(struct device *dev, u8 reg)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_read_word_swapped(client, reg);
+}
+
+static int ad7879_i2c_multi_read(struct device *dev,
+				 u8 first_reg, u8 count, u16 *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 idx;
+
+	i2c_smbus_read_i2c_block_data(client, first_reg, count * 2, (u8 *)buf);
+
+	for (idx = 0; idx < count; ++idx)
+		buf[idx] = swab16(buf[idx]);
+
+	return 0;
+}
+
+static int ad7879_i2c_write(struct device *dev, u8 reg, u16 val)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return i2c_smbus_write_word_swapped(client, reg, val);
+}
+
+static const struct ad7879_bus_ops ad7879_i2c_bus_ops = {
+	.bustype	= BUS_I2C,
+	.read		= ad7879_i2c_read,
+	.multi_read	= ad7879_i2c_multi_read,
+	.write		= ad7879_i2c_write,
+};
+
+static int ad7879_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	struct ad7879 *ts;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_WORD_DATA)) {
+		dev_err(&client->dev, "SMBUS Word Data not Supported\n");
+		return -EIO;
+	}
+
+	ts = ad7879_probe(&client->dev, AD7879_DEVID, client->irq,
+			  &ad7879_i2c_bus_ops);
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	i2c_set_clientdata(client, ts);
+
+	return 0;
+}
+
+static int ad7879_i2c_remove(struct i2c_client *client)
+{
+	struct ad7879 *ts = i2c_get_clientdata(client);
+
+	ad7879_remove(ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id ad7879_id[] = {
+	{ "ad7879", 0 },
+	{ "ad7889", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ad7879_id);
+
+static struct i2c_driver ad7879_i2c_driver = {
+	.driver = {
+		.name	= "ad7879",
+		.pm	= &ad7879_pm_ops,
+	},
+	.probe		= ad7879_i2c_probe,
+	.remove		= ad7879_i2c_remove,
+	.id_table	= ad7879_id,
+};
+
+module_i2c_driver(ad7879_i2c_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7879(-1) touchscreen I2C bus driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/ad7879-spi.c b/drivers/input/touchscreen/ad7879-spi.c
new file mode 100644
index 0000000..48033c2
--- /dev/null
+++ b/drivers/input/touchscreen/ad7879-spi.c
@@ -0,0 +1,163 @@
+/*
+ * AD7879/AD7889 touchscreen (SPI bus)
+ *
+ * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#include <linux/input.h>	/* BUS_SPI */
+#include <linux/pm.h>
+#include <linux/spi/spi.h>
+#include <linux/module.h>
+
+#include "ad7879.h"
+
+#define AD7879_DEVID		0x7A	/* AD7879/AD7889 */
+
+#define MAX_SPI_FREQ_HZ      5000000
+#define AD7879_CMD_MAGIC     0xE000
+#define AD7879_CMD_READ      (1 << 10)
+#define AD7879_CMD(reg)      (AD7879_CMD_MAGIC | ((reg) & 0xF))
+#define AD7879_WRITECMD(reg) (AD7879_CMD(reg))
+#define AD7879_READCMD(reg)  (AD7879_CMD(reg) | AD7879_CMD_READ)
+
+/*
+ * ad7879_read/write are only used for initial setup and for sysfs controls.
+ * The main traffic is done in ad7879_collect().
+ */
+
+static int ad7879_spi_xfer(struct spi_device *spi,
+			   u16 cmd, u8 count, u16 *tx_buf, u16 *rx_buf)
+{
+	struct spi_message msg;
+	struct spi_transfer *xfers;
+	void *spi_data;
+	u16 *command;
+	u16 *_rx_buf = _rx_buf; /* shut gcc up */
+	u8 idx;
+	int ret;
+
+	xfers = spi_data = kzalloc(sizeof(*xfers) * (count + 2), GFP_KERNEL);
+	if (!spi_data)
+		return -ENOMEM;
+
+	spi_message_init(&msg);
+
+	command = spi_data;
+	command[0] = cmd;
+	if (count == 1) {
+		/* ad7879_spi_{read,write} gave us buf on stack */
+		command[1] = *tx_buf;
+		tx_buf = &command[1];
+		_rx_buf = rx_buf;
+		rx_buf = &command[2];
+	}
+
+	++xfers;
+	xfers[0].tx_buf = command;
+	xfers[0].len = 2;
+	spi_message_add_tail(&xfers[0], &msg);
+	++xfers;
+
+	for (idx = 0; idx < count; ++idx) {
+		if (rx_buf)
+			xfers[idx].rx_buf = &rx_buf[idx];
+		if (tx_buf)
+			xfers[idx].tx_buf = &tx_buf[idx];
+		xfers[idx].len = 2;
+		spi_message_add_tail(&xfers[idx], &msg);
+	}
+
+	ret = spi_sync(spi, &msg);
+
+	if (count == 1)
+		_rx_buf[0] = command[2];
+
+	kfree(spi_data);
+
+	return ret;
+}
+
+static int ad7879_spi_multi_read(struct device *dev,
+				 u8 first_reg, u8 count, u16 *buf)
+{
+	struct spi_device *spi = to_spi_device(dev);
+
+	return ad7879_spi_xfer(spi, AD7879_READCMD(first_reg), count, NULL, buf);
+}
+
+static int ad7879_spi_read(struct device *dev, u8 reg)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	u16 ret, dummy;
+
+	return ad7879_spi_xfer(spi, AD7879_READCMD(reg), 1, &dummy, &ret) ? : ret;
+}
+
+static int ad7879_spi_write(struct device *dev, u8 reg, u16 val)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	u16 dummy;
+
+	return ad7879_spi_xfer(spi, AD7879_WRITECMD(reg), 1, &val, &dummy);
+}
+
+static const struct ad7879_bus_ops ad7879_spi_bus_ops = {
+	.bustype	= BUS_SPI,
+	.read		= ad7879_spi_read,
+	.multi_read	= ad7879_spi_multi_read,
+	.write		= ad7879_spi_write,
+};
+
+static int ad7879_spi_probe(struct spi_device *spi)
+{
+	struct ad7879 *ts;
+	int err;
+
+	/* don't exceed max specified SPI CLK frequency */
+	if (spi->max_speed_hz > MAX_SPI_FREQ_HZ) {
+		dev_err(&spi->dev, "SPI CLK %d Hz?\n", spi->max_speed_hz);
+		return -EINVAL;
+	}
+
+	spi->bits_per_word = 16;
+	err = spi_setup(spi);
+	if (err) {
+	        dev_dbg(&spi->dev, "spi master doesn't support 16 bits/word\n");
+	        return err;
+	}
+
+	ts = ad7879_probe(&spi->dev, AD7879_DEVID, spi->irq, &ad7879_spi_bus_ops);
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	spi_set_drvdata(spi, ts);
+
+	return 0;
+}
+
+static int ad7879_spi_remove(struct spi_device *spi)
+{
+	struct ad7879 *ts = spi_get_drvdata(spi);
+
+	ad7879_remove(ts);
+
+	return 0;
+}
+
+static struct spi_driver ad7879_spi_driver = {
+	.driver = {
+		.name	= "ad7879",
+		.pm	= &ad7879_pm_ops,
+	},
+	.probe		= ad7879_spi_probe,
+	.remove		= ad7879_spi_remove,
+};
+
+module_spi_driver(ad7879_spi_driver);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7879(-1) touchscreen SPI bus driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ad7879");
diff --git a/drivers/input/touchscreen/ad7879.c b/drivers/input/touchscreen/ad7879.c
new file mode 100644
index 0000000..fec66ad
--- /dev/null
+++ b/drivers/input/touchscreen/ad7879.c
@@ -0,0 +1,647 @@
+/*
+ * AD7879/AD7889 based touchscreen and GPIO driver
+ *
+ * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ *
+ * History:
+ * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
+ *
+ * Using code from:
+ *  - corgi_ts.c
+ *	Copyright (C) 2004-2005 Richard Purdie
+ *  - omap_ts.[hc], ads7846.h, ts_osk.c
+ *	Copyright (C) 2002 MontaVista Software
+ *	Copyright (C) 2004 Texas Instruments
+ *	Copyright (C) 2005 Dirk Behme
+ *  - ad7877.c
+ *	Copyright (C) 2006-2008 Analog Devices Inc.
+ */
+
+#include <linux/device.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+
+#include <linux/spi/ad7879.h>
+#include <linux/module.h>
+#include "ad7879.h"
+
+#define AD7879_REG_ZEROS		0
+#define AD7879_REG_CTRL1		1
+#define AD7879_REG_CTRL2		2
+#define AD7879_REG_CTRL3		3
+#define AD7879_REG_AUX1HIGH		4
+#define AD7879_REG_AUX1LOW		5
+#define AD7879_REG_TEMP1HIGH		6
+#define AD7879_REG_TEMP1LOW		7
+#define AD7879_REG_XPLUS		8
+#define AD7879_REG_YPLUS		9
+#define AD7879_REG_Z1			10
+#define AD7879_REG_Z2			11
+#define AD7879_REG_AUXVBAT		12
+#define AD7879_REG_TEMP			13
+#define AD7879_REG_REVID		14
+
+/* Control REG 1 */
+#define AD7879_TMR(x)			((x & 0xFF) << 0)
+#define AD7879_ACQ(x)			((x & 0x3) << 8)
+#define AD7879_MODE_NOC			(0 << 10)	/* Do not convert */
+#define AD7879_MODE_SCC			(1 << 10)	/* Single channel conversion */
+#define AD7879_MODE_SEQ0		(2 << 10)	/* Sequence 0 in Slave Mode */
+#define AD7879_MODE_SEQ1		(3 << 10)	/* Sequence 1 in Master Mode */
+#define AD7879_MODE_INT			(1 << 15)	/* PENIRQ disabled INT enabled */
+
+/* Control REG 2 */
+#define AD7879_FCD(x)			((x & 0x3) << 0)
+#define AD7879_RESET			(1 << 4)
+#define AD7879_MFS(x)			((x & 0x3) << 5)
+#define AD7879_AVG(x)			((x & 0x3) << 7)
+#define	AD7879_SER			(1 << 9)	/* non-differential */
+#define	AD7879_DFR			(0 << 9)	/* differential */
+#define AD7879_GPIOPOL			(1 << 10)
+#define AD7879_GPIODIR			(1 << 11)
+#define AD7879_GPIO_DATA		(1 << 12)
+#define AD7879_GPIO_EN			(1 << 13)
+#define AD7879_PM(x)			((x & 0x3) << 14)
+#define AD7879_PM_SHUTDOWN		(0)
+#define AD7879_PM_DYN			(1)
+#define AD7879_PM_FULLON		(2)
+
+/* Control REG 3 */
+#define AD7879_TEMPMASK_BIT		(1<<15)
+#define AD7879_AUXVBATMASK_BIT		(1<<14)
+#define AD7879_INTMODE_BIT		(1<<13)
+#define AD7879_GPIOALERTMASK_BIT	(1<<12)
+#define AD7879_AUXLOW_BIT		(1<<11)
+#define AD7879_AUXHIGH_BIT		(1<<10)
+#define AD7879_TEMPLOW_BIT		(1<<9)
+#define AD7879_TEMPHIGH_BIT		(1<<8)
+#define AD7879_YPLUS_BIT		(1<<7)
+#define AD7879_XPLUS_BIT		(1<<6)
+#define AD7879_Z1_BIT			(1<<5)
+#define AD7879_Z2_BIT			(1<<4)
+#define AD7879_AUX_BIT			(1<<3)
+#define AD7879_VBAT_BIT			(1<<2)
+#define AD7879_TEMP_BIT			(1<<1)
+
+enum {
+	AD7879_SEQ_XPOS  = 0,
+	AD7879_SEQ_YPOS  = 1,
+	AD7879_SEQ_Z1    = 2,
+	AD7879_SEQ_Z2    = 3,
+	AD7879_NR_SENSE  = 4,
+};
+
+#define	MAX_12BIT			((1<<12)-1)
+#define	TS_PEN_UP_TIMEOUT		msecs_to_jiffies(50)
+
+struct ad7879 {
+	const struct ad7879_bus_ops *bops;
+
+	struct device		*dev;
+	struct input_dev	*input;
+	struct timer_list	timer;
+#ifdef CONFIG_GPIOLIB
+	struct gpio_chip	gc;
+	struct mutex		mutex;
+#endif
+	unsigned int		irq;
+	bool			disabled;	/* P: input->mutex */
+	bool			suspended;	/* P: input->mutex */
+	bool			swap_xy;
+	u16			conversion_data[AD7879_NR_SENSE];
+	char			phys[32];
+	u8			first_conversion_delay;
+	u8			acquisition_time;
+	u8			averaging;
+	u8			pen_down_acc_interval;
+	u8			median;
+	u16			x_plate_ohms;
+	u16			pressure_max;
+	u16			cmd_crtl1;
+	u16			cmd_crtl2;
+	u16			cmd_crtl3;
+	int			x;
+	int			y;
+	int			Rt;
+};
+
+static int ad7879_read(struct ad7879 *ts, u8 reg)
+{
+	return ts->bops->read(ts->dev, reg);
+}
+
+static int ad7879_multi_read(struct ad7879 *ts, u8 first_reg, u8 count, u16 *buf)
+{
+	return ts->bops->multi_read(ts->dev, first_reg, count, buf);
+}
+
+static int ad7879_write(struct ad7879 *ts, u8 reg, u16 val)
+{
+	return ts->bops->write(ts->dev, reg, val);
+}
+
+static int ad7879_report(struct ad7879 *ts)
+{
+	struct input_dev *input_dev = ts->input;
+	unsigned Rt;
+	u16 x, y, z1, z2;
+
+	x = ts->conversion_data[AD7879_SEQ_XPOS] & MAX_12BIT;
+	y = ts->conversion_data[AD7879_SEQ_YPOS] & MAX_12BIT;
+	z1 = ts->conversion_data[AD7879_SEQ_Z1] & MAX_12BIT;
+	z2 = ts->conversion_data[AD7879_SEQ_Z2] & MAX_12BIT;
+
+	if (ts->swap_xy)
+		swap(x, y);
+
+	/*
+	 * The samples processed here are already preprocessed by the AD7879.
+	 * The preprocessing function consists of a median and an averaging
+	 * filter.  The combination of these two techniques provides a robust
+	 * solution, discarding the spurious noise in the signal and keeping
+	 * only the data of interest.  The size of both filters is
+	 * programmable. (dev.platform_data, see linux/spi/ad7879.h) Other
+	 * user-programmable conversion controls include variable acquisition
+	 * time, and first conversion delay. Up to 16 averages can be taken
+	 * per conversion.
+	 */
+
+	if (likely(x && z1)) {
+		/* compute touch pressure resistance using equation #1 */
+		Rt = (z2 - z1) * x * ts->x_plate_ohms;
+		Rt /= z1;
+		Rt = (Rt + 2047) >> 12;
+
+		/*
+		 * Sample found inconsistent, pressure is beyond
+		 * the maximum. Don't report it to user space.
+		 */
+		if (Rt > ts->pressure_max)
+			return -EINVAL;
+
+		/*
+		 * Note that we delay reporting events by one sample.
+		 * This is done to avoid reporting last sample of the
+		 * touch sequence, which may be incomplete if finger
+		 * leaves the surface before last reading is taken.
+		 */
+		if (timer_pending(&ts->timer)) {
+			/* Touch continues */
+			input_report_key(input_dev, BTN_TOUCH, 1);
+			input_report_abs(input_dev, ABS_X, ts->x);
+			input_report_abs(input_dev, ABS_Y, ts->y);
+			input_report_abs(input_dev, ABS_PRESSURE, ts->Rt);
+			input_sync(input_dev);
+		}
+
+		ts->x = x;
+		ts->y = y;
+		ts->Rt = Rt;
+
+		return 0;
+	}
+
+	return -EINVAL;
+}
+
+static void ad7879_ts_event_release(struct ad7879 *ts)
+{
+	struct input_dev *input_dev = ts->input;
+
+	input_report_abs(input_dev, ABS_PRESSURE, 0);
+	input_report_key(input_dev, BTN_TOUCH, 0);
+	input_sync(input_dev);
+}
+
+static void ad7879_timer(unsigned long handle)
+{
+	struct ad7879 *ts = (void *)handle;
+
+	ad7879_ts_event_release(ts);
+}
+
+static irqreturn_t ad7879_irq(int irq, void *handle)
+{
+	struct ad7879 *ts = handle;
+
+	ad7879_multi_read(ts, AD7879_REG_XPLUS, AD7879_NR_SENSE, ts->conversion_data);
+
+	if (!ad7879_report(ts))
+		mod_timer(&ts->timer, jiffies + TS_PEN_UP_TIMEOUT);
+
+	return IRQ_HANDLED;
+}
+
+static void __ad7879_enable(struct ad7879 *ts)
+{
+	ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	ad7879_write(ts, AD7879_REG_CTRL3, ts->cmd_crtl3);
+	ad7879_write(ts, AD7879_REG_CTRL1, ts->cmd_crtl1);
+
+	enable_irq(ts->irq);
+}
+
+static void __ad7879_disable(struct ad7879 *ts)
+{
+	u16 reg = (ts->cmd_crtl2 & ~AD7879_PM(-1)) |
+		AD7879_PM(AD7879_PM_SHUTDOWN);
+	disable_irq(ts->irq);
+
+	if (del_timer_sync(&ts->timer))
+		ad7879_ts_event_release(ts);
+
+	ad7879_write(ts, AD7879_REG_CTRL2, reg);
+}
+
+
+static int ad7879_open(struct input_dev *input)
+{
+	struct ad7879 *ts = input_get_drvdata(input);
+
+	/* protected by input->mutex */
+	if (!ts->disabled && !ts->suspended)
+		__ad7879_enable(ts);
+
+	return 0;
+}
+
+static void ad7879_close(struct input_dev* input)
+{
+	struct ad7879 *ts = input_get_drvdata(input);
+
+	/* protected by input->mutex */
+	if (!ts->disabled && !ts->suspended)
+		__ad7879_disable(ts);
+}
+
+static int __maybe_unused ad7879_suspend(struct device *dev)
+{
+	struct ad7879 *ts = dev_get_drvdata(dev);
+
+	mutex_lock(&ts->input->mutex);
+
+	if (!ts->suspended && !ts->disabled && ts->input->users)
+		__ad7879_disable(ts);
+
+	ts->suspended = true;
+
+	mutex_unlock(&ts->input->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused ad7879_resume(struct device *dev)
+{
+	struct ad7879 *ts = dev_get_drvdata(dev);
+
+	mutex_lock(&ts->input->mutex);
+
+	if (ts->suspended && !ts->disabled && ts->input->users)
+		__ad7879_enable(ts);
+
+	ts->suspended = false;
+
+	mutex_unlock(&ts->input->mutex);
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(ad7879_pm_ops, ad7879_suspend, ad7879_resume);
+EXPORT_SYMBOL(ad7879_pm_ops);
+
+static void ad7879_toggle(struct ad7879 *ts, bool disable)
+{
+	mutex_lock(&ts->input->mutex);
+
+	if (!ts->suspended && ts->input->users != 0) {
+
+		if (disable) {
+			if (ts->disabled)
+				__ad7879_enable(ts);
+		} else {
+			if (!ts->disabled)
+				__ad7879_disable(ts);
+		}
+	}
+
+	ts->disabled = disable;
+
+	mutex_unlock(&ts->input->mutex);
+}
+
+static ssize_t ad7879_disable_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ad7879 *ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ad7879_disable_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ad7879 *ts = dev_get_drvdata(dev);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 10, &val);
+	if (error)
+		return error;
+
+	ad7879_toggle(ts, val);
+
+	return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ad7879_disable_show, ad7879_disable_store);
+
+static struct attribute *ad7879_attributes[] = {
+	&dev_attr_disable.attr,
+	NULL
+};
+
+static const struct attribute_group ad7879_attr_group = {
+	.attrs = ad7879_attributes,
+};
+
+#ifdef CONFIG_GPIOLIB
+static int ad7879_gpio_direction_input(struct gpio_chip *chip,
+					unsigned gpio)
+{
+	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+	int err;
+
+	mutex_lock(&ts->mutex);
+	ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIODIR | AD7879_GPIOPOL;
+	err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	mutex_unlock(&ts->mutex);
+
+	return err;
+}
+
+static int ad7879_gpio_direction_output(struct gpio_chip *chip,
+					unsigned gpio, int level)
+{
+	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+	int err;
+
+	mutex_lock(&ts->mutex);
+	ts->cmd_crtl2 &= ~AD7879_GPIODIR;
+	ts->cmd_crtl2 |= AD7879_GPIO_EN | AD7879_GPIOPOL;
+	if (level)
+		ts->cmd_crtl2 |= AD7879_GPIO_DATA;
+	else
+		ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
+
+	err = ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	mutex_unlock(&ts->mutex);
+
+	return err;
+}
+
+static int ad7879_gpio_get_value(struct gpio_chip *chip, unsigned gpio)
+{
+	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+	u16 val;
+
+	mutex_lock(&ts->mutex);
+	val = ad7879_read(ts, AD7879_REG_CTRL2);
+	mutex_unlock(&ts->mutex);
+
+	return !!(val & AD7879_GPIO_DATA);
+}
+
+static void ad7879_gpio_set_value(struct gpio_chip *chip,
+				  unsigned gpio, int value)
+{
+	struct ad7879 *ts = container_of(chip, struct ad7879, gc);
+
+	mutex_lock(&ts->mutex);
+	if (value)
+		ts->cmd_crtl2 |= AD7879_GPIO_DATA;
+	else
+		ts->cmd_crtl2 &= ~AD7879_GPIO_DATA;
+
+	ad7879_write(ts, AD7879_REG_CTRL2, ts->cmd_crtl2);
+	mutex_unlock(&ts->mutex);
+}
+
+static int ad7879_gpio_add(struct ad7879 *ts,
+			   const struct ad7879_platform_data *pdata)
+{
+	int ret = 0;
+
+	mutex_init(&ts->mutex);
+
+	if (pdata->gpio_export) {
+		ts->gc.direction_input = ad7879_gpio_direction_input;
+		ts->gc.direction_output = ad7879_gpio_direction_output;
+		ts->gc.get = ad7879_gpio_get_value;
+		ts->gc.set = ad7879_gpio_set_value;
+		ts->gc.can_sleep = 1;
+		ts->gc.base = pdata->gpio_base;
+		ts->gc.ngpio = 1;
+		ts->gc.label = "AD7879-GPIO";
+		ts->gc.owner = THIS_MODULE;
+		ts->gc.dev = ts->dev;
+
+		ret = gpiochip_add(&ts->gc);
+		if (ret)
+			dev_err(ts->dev, "failed to register gpio %d\n",
+				ts->gc.base);
+	}
+
+	return ret;
+}
+
+static void ad7879_gpio_remove(struct ad7879 *ts)
+{
+	const struct ad7879_platform_data *pdata = dev_get_platdata(ts->dev);
+
+	if (pdata->gpio_export)
+		gpiochip_remove(&ts->gc);
+
+}
+#else
+static inline int ad7879_gpio_add(struct ad7879 *ts,
+				  const struct ad7879_platform_data *pdata)
+{
+	return 0;
+}
+
+static inline void ad7879_gpio_remove(struct ad7879 *ts)
+{
+}
+#endif
+
+struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned int irq,
+			    const struct ad7879_bus_ops *bops)
+{
+	struct ad7879_platform_data *pdata = dev_get_platdata(dev);
+	struct ad7879 *ts;
+	struct input_dev *input_dev;
+	int err;
+	u16 revid;
+
+	if (!irq) {
+		dev_err(dev, "no IRQ?\n");
+		err = -EINVAL;
+		goto err_out;
+	}
+
+	if (!pdata) {
+		dev_err(dev, "no platform data?\n");
+		err = -EINVAL;
+		goto err_out;
+	}
+
+	ts = kzalloc(sizeof(*ts), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->bops = bops;
+	ts->dev = dev;
+	ts->input = input_dev;
+	ts->irq = irq;
+	ts->swap_xy = pdata->swap_xy;
+
+	setup_timer(&ts->timer, ad7879_timer, (unsigned long) ts);
+
+	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+	ts->pressure_max = pdata->pressure_max ? : ~0;
+
+	ts->first_conversion_delay = pdata->first_conversion_delay;
+	ts->acquisition_time = pdata->acquisition_time;
+	ts->averaging = pdata->averaging;
+	ts->pen_down_acc_interval = pdata->pen_down_acc_interval;
+	ts->median = pdata->median;
+
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
+
+	input_dev->name = "AD7879 Touchscreen";
+	input_dev->phys = ts->phys;
+	input_dev->dev.parent = dev;
+	input_dev->id.bustype = bops->bustype;
+
+	input_dev->open = ad7879_open;
+	input_dev->close = ad7879_close;
+
+	input_set_drvdata(input_dev, ts);
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(ABS_X, input_dev->absbit);
+	__set_bit(ABS_Y, input_dev->absbit);
+	__set_bit(ABS_PRESSURE, input_dev->absbit);
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X,
+			pdata->x_min ? : 0,
+			pdata->x_max ? : MAX_12BIT,
+			0, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			pdata->y_min ? : 0,
+			pdata->y_max ? : MAX_12BIT,
+			0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE,
+			pdata->pressure_min, pdata->pressure_max, 0, 0);
+
+	err = ad7879_write(ts, AD7879_REG_CTRL2, AD7879_RESET);
+	if (err < 0) {
+		dev_err(dev, "Failed to write %s\n", input_dev->name);
+		goto err_free_mem;
+	}
+
+	revid = ad7879_read(ts, AD7879_REG_REVID);
+	input_dev->id.product = (revid & 0xff);
+	input_dev->id.version = revid >> 8;
+	if (input_dev->id.product != devid) {
+		dev_err(dev, "Failed to probe %s (%x vs %x)\n",
+			input_dev->name, devid, revid);
+		err = -ENODEV;
+		goto err_free_mem;
+	}
+
+	ts->cmd_crtl3 = AD7879_YPLUS_BIT |
+			AD7879_XPLUS_BIT |
+			AD7879_Z2_BIT |
+			AD7879_Z1_BIT |
+			AD7879_TEMPMASK_BIT |
+			AD7879_AUXVBATMASK_BIT |
+			AD7879_GPIOALERTMASK_BIT;
+
+	ts->cmd_crtl2 = AD7879_PM(AD7879_PM_DYN) | AD7879_DFR |
+			AD7879_AVG(ts->averaging) |
+			AD7879_MFS(ts->median) |
+			AD7879_FCD(ts->first_conversion_delay);
+
+	ts->cmd_crtl1 = AD7879_MODE_INT | AD7879_MODE_SEQ1 |
+			AD7879_ACQ(ts->acquisition_time) |
+			AD7879_TMR(ts->pen_down_acc_interval);
+
+	err = request_threaded_irq(ts->irq, NULL, ad7879_irq,
+				   IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				   dev_name(dev), ts);
+	if (err) {
+		dev_err(dev, "irq %d busy?\n", ts->irq);
+		goto err_free_mem;
+	}
+
+	__ad7879_disable(ts);
+
+	err = sysfs_create_group(&dev->kobj, &ad7879_attr_group);
+	if (err)
+		goto err_free_irq;
+
+	err = ad7879_gpio_add(ts, pdata);
+	if (err)
+		goto err_remove_attr;
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_remove_gpio;
+
+	return ts;
+
+err_remove_gpio:
+	ad7879_gpio_remove(ts);
+err_remove_attr:
+	sysfs_remove_group(&dev->kobj, &ad7879_attr_group);
+err_free_irq:
+	free_irq(ts->irq, ts);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+err_out:
+	return ERR_PTR(err);
+}
+EXPORT_SYMBOL(ad7879_probe);
+
+void ad7879_remove(struct ad7879 *ts)
+{
+	ad7879_gpio_remove(ts);
+	sysfs_remove_group(&ts->dev->kobj, &ad7879_attr_group);
+	free_irq(ts->irq, ts);
+	input_unregister_device(ts->input);
+	kfree(ts);
+}
+EXPORT_SYMBOL(ad7879_remove);
+
+MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
+MODULE_DESCRIPTION("AD7879(-1) touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/ad7879.h b/drivers/input/touchscreen/ad7879.h
new file mode 100644
index 0000000..6fd13c4
--- /dev/null
+++ b/drivers/input/touchscreen/ad7879.h
@@ -0,0 +1,30 @@
+/*
+ * AD7879/AD7889 touchscreen (bus interfaces)
+ *
+ * Copyright (C) 2008-2010 Michael Hennerich, Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef _AD7879_H_
+#define _AD7879_H_
+
+#include <linux/types.h>
+
+struct ad7879;
+struct device;
+
+struct ad7879_bus_ops {
+	u16 bustype;
+	int (*read)(struct device *dev, u8 reg);
+	int (*multi_read)(struct device *dev, u8 first_reg, u8 count, u16 *buf);
+	int (*write)(struct device *dev, u8 reg, u16 val);
+};
+
+extern const struct dev_pm_ops ad7879_pm_ops;
+
+struct ad7879 *ad7879_probe(struct device *dev, u8 devid, unsigned irq,
+			    const struct ad7879_bus_ops *bops);
+void ad7879_remove(struct ad7879 *);
+
+#endif
diff --git a/drivers/input/touchscreen/ads7846.c b/drivers/input/touchscreen/ads7846.c
new file mode 100644
index 0000000..a61b215
--- /dev/null
+++ b/drivers/input/touchscreen/ads7846.c
@@ -0,0 +1,1512 @@
+/*
+ * ADS7846 based touchscreen and sensor driver
+ *
+ * Copyright (c) 2005 David Brownell
+ * Copyright (c) 2006 Nokia Corporation
+ * Various changes: Imre Deak <imre.deak@nokia.com>
+ *
+ * Using code from:
+ *  - corgi_ts.c
+ *	Copyright (C) 2004-2005 Richard Purdie
+ *  - omap_ts.[hc], ads7846.h, ts_osk.c
+ *	Copyright (C) 2002 MontaVista Software
+ *	Copyright (C) 2004 Texas Instruments
+ *	Copyright (C) 2005 Dirk Behme
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+#include <linux/types.h>
+#include <linux/hwmon.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/of_device.h>
+#include <linux/gpio.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <asm/irq.h>
+
+/*
+ * This code has been heavily tested on a Nokia 770, and lightly
+ * tested on other ads7846 devices (OSK/Mistral, Lubbock, Spitz).
+ * TSC2046 is just newer ads7846 silicon.
+ * Support for ads7843 tested on Atmel at91sam926x-EK.
+ * Support for ads7845 has only been stubbed in.
+ * Support for Analog Devices AD7873 and AD7843 tested.
+ *
+ * IRQ handling needs a workaround because of a shortcoming in handling
+ * edge triggered IRQs on some platforms like the OMAP1/2. These
+ * platforms don't handle the ARM lazy IRQ disabling properly, thus we
+ * have to maintain our own SW IRQ disabled status. This should be
+ * removed as soon as the affected platform's IRQ handling is fixed.
+ *
+ * App note sbaa036 talks in more detail about accurate sampling...
+ * that ought to help in situations like LCDs inducing noise (which
+ * can also be helped by using synch signals) and more generally.
+ * This driver tries to utilize the measures described in the app
+ * note. The strength of filtering can be set in the board-* specific
+ * files.
+ */
+
+#define TS_POLL_DELAY	1	/* ms delay before the first sample */
+#define TS_POLL_PERIOD	5	/* ms delay between samples */
+
+/* this driver doesn't aim at the peak continuous sample rate */
+#define	SAMPLE_BITS	(8 /*cmd*/ + 16 /*sample*/ + 2 /* before, after */)
+
+struct ts_event {
+	/*
+	 * For portability, we can't read 12 bit values using SPI (which
+	 * would make the controller deliver them as native byte order u16
+	 * with msbs zeroed).  Instead, we read them as two 8-bit values,
+	 * *** WHICH NEED BYTESWAPPING *** and range adjustment.
+	 */
+	u16	x;
+	u16	y;
+	u16	z1, z2;
+	bool	ignore;
+	u8	x_buf[3];
+	u8	y_buf[3];
+};
+
+/*
+ * We allocate this separately to avoid cache line sharing issues when
+ * driver is used with DMA-based SPI controllers (like atmel_spi) on
+ * systems where main memory is not DMA-coherent (most non-x86 boards).
+ */
+struct ads7846_packet {
+	u8			read_x, read_y, read_z1, read_z2, pwrdown;
+	u16			dummy;		/* for the pwrdown read */
+	struct ts_event		tc;
+	/* for ads7845 with mpc5121 psc spi we use 3-byte buffers */
+	u8			read_x_cmd[3], read_y_cmd[3], pwrdown_cmd[3];
+};
+
+struct ads7846 {
+	struct input_dev	*input;
+	char			phys[32];
+	char			name[32];
+
+	struct spi_device	*spi;
+	struct regulator	*reg;
+
+#if IS_ENABLED(CONFIG_HWMON)
+	struct device		*hwmon;
+#endif
+
+	u16			model;
+	u16			vref_mv;
+	u16			vref_delay_usecs;
+	u16			x_plate_ohms;
+	u16			pressure_max;
+
+	bool			swap_xy;
+	bool			use_internal;
+
+	struct ads7846_packet	*packet;
+
+	struct spi_transfer	xfer[18];
+	struct spi_message	msg[5];
+	int			msg_count;
+	wait_queue_head_t	wait;
+
+	bool			pendown;
+
+	int			read_cnt;
+	int			read_rep;
+	int			last_read;
+
+	u16			debounce_max;
+	u16			debounce_tol;
+	u16			debounce_rep;
+
+	u16			penirq_recheck_delay_usecs;
+
+	struct mutex		lock;
+	bool			stopped;	/* P: lock */
+	bool			disabled;	/* P: lock */
+	bool			suspended;	/* P: lock */
+
+	int			(*filter)(void *data, int data_idx, int *val);
+	void			*filter_data;
+	void			(*filter_cleanup)(void *data);
+	int			(*get_pendown_state)(void);
+	int			gpio_pendown;
+
+	void			(*wait_for_sync)(void);
+};
+
+/* leave chip selected when we're done, for quicker re-select? */
+#if	0
+#define	CS_CHANGE(xfer)	((xfer).cs_change = 1)
+#else
+#define	CS_CHANGE(xfer)	((xfer).cs_change = 0)
+#endif
+
+/*--------------------------------------------------------------------------*/
+
+/* The ADS7846 has touchscreen and other sensors.
+ * Earlier ads784x chips are somewhat compatible.
+ */
+#define	ADS_START		(1 << 7)
+#define	ADS_A2A1A0_d_y		(1 << 4)	/* differential */
+#define	ADS_A2A1A0_d_z1		(3 << 4)	/* differential */
+#define	ADS_A2A1A0_d_z2		(4 << 4)	/* differential */
+#define	ADS_A2A1A0_d_x		(5 << 4)	/* differential */
+#define	ADS_A2A1A0_temp0	(0 << 4)	/* non-differential */
+#define	ADS_A2A1A0_vbatt	(2 << 4)	/* non-differential */
+#define	ADS_A2A1A0_vaux		(6 << 4)	/* non-differential */
+#define	ADS_A2A1A0_temp1	(7 << 4)	/* non-differential */
+#define	ADS_8_BIT		(1 << 3)
+#define	ADS_12_BIT		(0 << 3)
+#define	ADS_SER			(1 << 2)	/* non-differential */
+#define	ADS_DFR			(0 << 2)	/* differential */
+#define	ADS_PD10_PDOWN		(0 << 0)	/* low power mode + penirq */
+#define	ADS_PD10_ADC_ON		(1 << 0)	/* ADC on */
+#define	ADS_PD10_REF_ON		(2 << 0)	/* vREF on + penirq */
+#define	ADS_PD10_ALL_ON		(3 << 0)	/* ADC + vREF on */
+
+#define	MAX_12BIT	((1<<12)-1)
+
+/* leave ADC powered up (disables penirq) between differential samples */
+#define	READ_12BIT_DFR(x, adc, vref) (ADS_START | ADS_A2A1A0_d_ ## x \
+	| ADS_12_BIT | ADS_DFR | \
+	(adc ? ADS_PD10_ADC_ON : 0) | (vref ? ADS_PD10_REF_ON : 0))
+
+#define	READ_Y(vref)	(READ_12BIT_DFR(y,  1, vref))
+#define	READ_Z1(vref)	(READ_12BIT_DFR(z1, 1, vref))
+#define	READ_Z2(vref)	(READ_12BIT_DFR(z2, 1, vref))
+
+#define	READ_X(vref)	(READ_12BIT_DFR(x,  1, vref))
+#define	PWRDOWN		(READ_12BIT_DFR(y,  0, 0))	/* LAST */
+
+/* single-ended samples need to first power up reference voltage;
+ * we leave both ADC and VREF powered
+ */
+#define	READ_12BIT_SER(x) (ADS_START | ADS_A2A1A0_ ## x \
+	| ADS_12_BIT | ADS_SER)
+
+#define	REF_ON	(READ_12BIT_DFR(x, 1, 1))
+#define	REF_OFF	(READ_12BIT_DFR(y, 0, 0))
+
+/* Must be called with ts->lock held */
+static void ads7846_stop(struct ads7846 *ts)
+{
+	if (!ts->disabled && !ts->suspended) {
+		/* Signal IRQ thread to stop polling and disable the handler. */
+		ts->stopped = true;
+		mb();
+		wake_up(&ts->wait);
+		disable_irq(ts->spi->irq);
+	}
+}
+
+/* Must be called with ts->lock held */
+static void ads7846_restart(struct ads7846 *ts)
+{
+	if (!ts->disabled && !ts->suspended) {
+		/* Tell IRQ thread that it may poll the device. */
+		ts->stopped = false;
+		mb();
+		enable_irq(ts->spi->irq);
+	}
+}
+
+/* Must be called with ts->lock held */
+static void __ads7846_disable(struct ads7846 *ts)
+{
+	ads7846_stop(ts);
+	regulator_disable(ts->reg);
+
+	/*
+	 * We know the chip's in low power mode since we always
+	 * leave it that way after every request
+	 */
+}
+
+/* Must be called with ts->lock held */
+static void __ads7846_enable(struct ads7846 *ts)
+{
+	int error;
+
+	error = regulator_enable(ts->reg);
+	if (error != 0)
+		dev_err(&ts->spi->dev, "Failed to enable supply: %d\n", error);
+
+	ads7846_restart(ts);
+}
+
+static void ads7846_disable(struct ads7846 *ts)
+{
+	mutex_lock(&ts->lock);
+
+	if (!ts->disabled) {
+
+		if  (!ts->suspended)
+			__ads7846_disable(ts);
+
+		ts->disabled = true;
+	}
+
+	mutex_unlock(&ts->lock);
+}
+
+static void ads7846_enable(struct ads7846 *ts)
+{
+	mutex_lock(&ts->lock);
+
+	if (ts->disabled) {
+
+		ts->disabled = false;
+
+		if (!ts->suspended)
+			__ads7846_enable(ts);
+	}
+
+	mutex_unlock(&ts->lock);
+}
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * Non-touchscreen sensors only use single-ended conversions.
+ * The range is GND..vREF. The ads7843 and ads7835 must use external vREF;
+ * ads7846 lets that pin be unconnected, to use internal vREF.
+ */
+
+struct ser_req {
+	u8			ref_on;
+	u8			command;
+	u8			ref_off;
+	u16			scratch;
+	struct spi_message	msg;
+	struct spi_transfer	xfer[6];
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	__be16 sample ____cacheline_aligned;
+};
+
+struct ads7845_ser_req {
+	u8			command[3];
+	struct spi_message	msg;
+	struct spi_transfer	xfer[2];
+	/*
+	 * DMA (thus cache coherency maintenance) requires the
+	 * transfer buffers to live in their own cache lines.
+	 */
+	u8 sample[3] ____cacheline_aligned;
+};
+
+static int ads7846_read12_ser(struct device *dev, unsigned command)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	struct ser_req *req;
+	int status;
+
+	req = kzalloc(sizeof *req, GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	spi_message_init(&req->msg);
+
+	/* maybe turn on internal vREF, and let it settle */
+	if (ts->use_internal) {
+		req->ref_on = REF_ON;
+		req->xfer[0].tx_buf = &req->ref_on;
+		req->xfer[0].len = 1;
+		spi_message_add_tail(&req->xfer[0], &req->msg);
+
+		req->xfer[1].rx_buf = &req->scratch;
+		req->xfer[1].len = 2;
+
+		/* for 1uF, settle for 800 usec; no cap, 100 usec.  */
+		req->xfer[1].delay_usecs = ts->vref_delay_usecs;
+		spi_message_add_tail(&req->xfer[1], &req->msg);
+
+		/* Enable reference voltage */
+		command |= ADS_PD10_REF_ON;
+	}
+
+	/* Enable ADC in every case */
+	command |= ADS_PD10_ADC_ON;
+
+	/* take sample */
+	req->command = (u8) command;
+	req->xfer[2].tx_buf = &req->command;
+	req->xfer[2].len = 1;
+	spi_message_add_tail(&req->xfer[2], &req->msg);
+
+	req->xfer[3].rx_buf = &req->sample;
+	req->xfer[3].len = 2;
+	spi_message_add_tail(&req->xfer[3], &req->msg);
+
+	/* REVISIT:  take a few more samples, and compare ... */
+
+	/* converter in low power mode & enable PENIRQ */
+	req->ref_off = PWRDOWN;
+	req->xfer[4].tx_buf = &req->ref_off;
+	req->xfer[4].len = 1;
+	spi_message_add_tail(&req->xfer[4], &req->msg);
+
+	req->xfer[5].rx_buf = &req->scratch;
+	req->xfer[5].len = 2;
+	CS_CHANGE(req->xfer[5]);
+	spi_message_add_tail(&req->xfer[5], &req->msg);
+
+	mutex_lock(&ts->lock);
+	ads7846_stop(ts);
+	status = spi_sync(spi, &req->msg);
+	ads7846_restart(ts);
+	mutex_unlock(&ts->lock);
+
+	if (status == 0) {
+		/* on-wire is a must-ignore bit, a BE12 value, then padding */
+		status = be16_to_cpu(req->sample);
+		status = status >> 3;
+		status &= 0x0fff;
+	}
+
+	kfree(req);
+	return status;
+}
+
+static int ads7845_read12_ser(struct device *dev, unsigned command)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	struct ads7845_ser_req *req;
+	int status;
+
+	req = kzalloc(sizeof *req, GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	spi_message_init(&req->msg);
+
+	req->command[0] = (u8) command;
+	req->xfer[0].tx_buf = req->command;
+	req->xfer[0].rx_buf = req->sample;
+	req->xfer[0].len = 3;
+	spi_message_add_tail(&req->xfer[0], &req->msg);
+
+	mutex_lock(&ts->lock);
+	ads7846_stop(ts);
+	status = spi_sync(spi, &req->msg);
+	ads7846_restart(ts);
+	mutex_unlock(&ts->lock);
+
+	if (status == 0) {
+		/* BE12 value, then padding */
+		status = be16_to_cpu(*((u16 *)&req->sample[1]));
+		status = status >> 3;
+		status &= 0x0fff;
+	}
+
+	kfree(req);
+	return status;
+}
+
+#if IS_ENABLED(CONFIG_HWMON)
+
+#define SHOW(name, var, adjust) static ssize_t \
+name ## _show(struct device *dev, struct device_attribute *attr, char *buf) \
+{ \
+	struct ads7846 *ts = dev_get_drvdata(dev); \
+	ssize_t v = ads7846_read12_ser(&ts->spi->dev, \
+			READ_12BIT_SER(var)); \
+	if (v < 0) \
+		return v; \
+	return sprintf(buf, "%u\n", adjust(ts, v)); \
+} \
+static DEVICE_ATTR(name, S_IRUGO, name ## _show, NULL);
+
+
+/* Sysfs conventions report temperatures in millidegrees Celsius.
+ * ADS7846 could use the low-accuracy two-sample scheme, but can't do the high
+ * accuracy scheme without calibration data.  For now we won't try either;
+ * userspace sees raw sensor values, and must scale/calibrate appropriately.
+ */
+static inline unsigned null_adjust(struct ads7846 *ts, ssize_t v)
+{
+	return v;
+}
+
+SHOW(temp0, temp0, null_adjust)		/* temp1_input */
+SHOW(temp1, temp1, null_adjust)		/* temp2_input */
+
+
+/* sysfs conventions report voltages in millivolts.  We can convert voltages
+ * if we know vREF.  userspace may need to scale vAUX to match the board's
+ * external resistors; we assume that vBATT only uses the internal ones.
+ */
+static inline unsigned vaux_adjust(struct ads7846 *ts, ssize_t v)
+{
+	unsigned retval = v;
+
+	/* external resistors may scale vAUX into 0..vREF */
+	retval *= ts->vref_mv;
+	retval = retval >> 12;
+
+	return retval;
+}
+
+static inline unsigned vbatt_adjust(struct ads7846 *ts, ssize_t v)
+{
+	unsigned retval = vaux_adjust(ts, v);
+
+	/* ads7846 has a resistor ladder to scale this signal down */
+	if (ts->model == 7846)
+		retval *= 4;
+
+	return retval;
+}
+
+SHOW(in0_input, vaux, vaux_adjust)
+SHOW(in1_input, vbatt, vbatt_adjust)
+
+static umode_t ads7846_is_visible(struct kobject *kobj, struct attribute *attr,
+				  int index)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct ads7846 *ts = dev_get_drvdata(dev);
+
+	if (ts->model == 7843 && index < 2)	/* in0, in1 */
+		return 0;
+	if (ts->model == 7845 && index != 2)	/* in0 */
+		return 0;
+
+	return attr->mode;
+}
+
+static struct attribute *ads7846_attributes[] = {
+	&dev_attr_temp0.attr,		/* 0 */
+	&dev_attr_temp1.attr,		/* 1 */
+	&dev_attr_in0_input.attr,	/* 2 */
+	&dev_attr_in1_input.attr,	/* 3 */
+	NULL,
+};
+
+static struct attribute_group ads7846_attr_group = {
+	.attrs = ads7846_attributes,
+	.is_visible = ads7846_is_visible,
+};
+__ATTRIBUTE_GROUPS(ads7846_attr);
+
+static int ads784x_hwmon_register(struct spi_device *spi, struct ads7846 *ts)
+{
+	/* hwmon sensors need a reference voltage */
+	switch (ts->model) {
+	case 7846:
+		if (!ts->vref_mv) {
+			dev_dbg(&spi->dev, "assuming 2.5V internal vREF\n");
+			ts->vref_mv = 2500;
+			ts->use_internal = true;
+		}
+		break;
+	case 7845:
+	case 7843:
+		if (!ts->vref_mv) {
+			dev_warn(&spi->dev,
+				"external vREF for ADS%d not specified\n",
+				ts->model);
+			return 0;
+		}
+		break;
+	}
+
+	ts->hwmon = hwmon_device_register_with_groups(&spi->dev, spi->modalias,
+						      ts, ads7846_attr_groups);
+
+	return PTR_ERR_OR_ZERO(ts->hwmon);
+}
+
+static void ads784x_hwmon_unregister(struct spi_device *spi,
+				     struct ads7846 *ts)
+{
+	if (ts->hwmon)
+		hwmon_device_unregister(ts->hwmon);
+}
+
+#else
+static inline int ads784x_hwmon_register(struct spi_device *spi,
+					 struct ads7846 *ts)
+{
+	return 0;
+}
+
+static inline void ads784x_hwmon_unregister(struct spi_device *spi,
+					    struct ads7846 *ts)
+{
+}
+#endif
+
+static ssize_t ads7846_pen_down_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->pendown);
+}
+
+static DEVICE_ATTR(pen_down, S_IRUGO, ads7846_pen_down_show, NULL);
+
+static ssize_t ads7846_disable_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+
+	return sprintf(buf, "%u\n", ts->disabled);
+}
+
+static ssize_t ads7846_disable_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t count)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+	unsigned int i;
+	int err;
+
+	err = kstrtouint(buf, 10, &i);
+	if (err)
+		return err;
+
+	if (i)
+		ads7846_disable(ts);
+	else
+		ads7846_enable(ts);
+
+	return count;
+}
+
+static DEVICE_ATTR(disable, 0664, ads7846_disable_show, ads7846_disable_store);
+
+static struct attribute *ads784x_attributes[] = {
+	&dev_attr_pen_down.attr,
+	&dev_attr_disable.attr,
+	NULL,
+};
+
+static struct attribute_group ads784x_attr_group = {
+	.attrs = ads784x_attributes,
+};
+
+/*--------------------------------------------------------------------------*/
+
+static int get_pendown_state(struct ads7846 *ts)
+{
+	if (ts->get_pendown_state)
+		return ts->get_pendown_state();
+
+	return !gpio_get_value(ts->gpio_pendown);
+}
+
+static void null_wait_for_sync(void)
+{
+}
+
+static int ads7846_debounce_filter(void *ads, int data_idx, int *val)
+{
+	struct ads7846 *ts = ads;
+
+	if (!ts->read_cnt || (abs(ts->last_read - *val) > ts->debounce_tol)) {
+		/* Start over collecting consistent readings. */
+		ts->read_rep = 0;
+		/*
+		 * Repeat it, if this was the first read or the read
+		 * wasn't consistent enough.
+		 */
+		if (ts->read_cnt < ts->debounce_max) {
+			ts->last_read = *val;
+			ts->read_cnt++;
+			return ADS7846_FILTER_REPEAT;
+		} else {
+			/*
+			 * Maximum number of debouncing reached and still
+			 * not enough number of consistent readings. Abort
+			 * the whole sample, repeat it in the next sampling
+			 * period.
+			 */
+			ts->read_cnt = 0;
+			return ADS7846_FILTER_IGNORE;
+		}
+	} else {
+		if (++ts->read_rep > ts->debounce_rep) {
+			/*
+			 * Got a good reading for this coordinate,
+			 * go for the next one.
+			 */
+			ts->read_cnt = 0;
+			ts->read_rep = 0;
+			return ADS7846_FILTER_OK;
+		} else {
+			/* Read more values that are consistent. */
+			ts->read_cnt++;
+			return ADS7846_FILTER_REPEAT;
+		}
+	}
+}
+
+static int ads7846_no_filter(void *ads, int data_idx, int *val)
+{
+	return ADS7846_FILTER_OK;
+}
+
+static int ads7846_get_value(struct ads7846 *ts, struct spi_message *m)
+{
+	int value;
+	struct spi_transfer *t =
+		list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+
+	if (ts->model == 7845) {
+		value = be16_to_cpup((__be16 *)&(((char *)t->rx_buf)[1]));
+	} else {
+		/*
+		 * adjust:  on-wire is a must-ignore bit, a BE12 value, then
+		 * padding; built from two 8 bit values written msb-first.
+		 */
+		value = be16_to_cpup((__be16 *)t->rx_buf);
+	}
+
+	/* enforce ADC output is 12 bits width */
+	return (value >> 3) & 0xfff;
+}
+
+static void ads7846_update_value(struct spi_message *m, int val)
+{
+	struct spi_transfer *t =
+		list_entry(m->transfers.prev, struct spi_transfer, transfer_list);
+
+	*(u16 *)t->rx_buf = val;
+}
+
+static void ads7846_read_state(struct ads7846 *ts)
+{
+	struct ads7846_packet *packet = ts->packet;
+	struct spi_message *m;
+	int msg_idx = 0;
+	int val;
+	int action;
+	int error;
+
+	while (msg_idx < ts->msg_count) {
+
+		ts->wait_for_sync();
+
+		m = &ts->msg[msg_idx];
+		error = spi_sync(ts->spi, m);
+		if (error) {
+			dev_err(&ts->spi->dev, "spi_sync --> %d\n", error);
+			packet->tc.ignore = true;
+			return;
+		}
+
+		/*
+		 * Last message is power down request, no need to convert
+		 * or filter the value.
+		 */
+		if (msg_idx < ts->msg_count - 1) {
+
+			val = ads7846_get_value(ts, m);
+
+			action = ts->filter(ts->filter_data, msg_idx, &val);
+			switch (action) {
+			case ADS7846_FILTER_REPEAT:
+				continue;
+
+			case ADS7846_FILTER_IGNORE:
+				packet->tc.ignore = true;
+				msg_idx = ts->msg_count - 1;
+				continue;
+
+			case ADS7846_FILTER_OK:
+				ads7846_update_value(m, val);
+				packet->tc.ignore = false;
+				msg_idx++;
+				break;
+
+			default:
+				BUG();
+			}
+		} else {
+			msg_idx++;
+		}
+	}
+}
+
+static void ads7846_report_state(struct ads7846 *ts)
+{
+	struct ads7846_packet *packet = ts->packet;
+	unsigned int Rt;
+	u16 x, y, z1, z2;
+
+	/*
+	 * ads7846_get_value() does in-place conversion (including byte swap)
+	 * from on-the-wire format as part of debouncing to get stable
+	 * readings.
+	 */
+	if (ts->model == 7845) {
+		x = *(u16 *)packet->tc.x_buf;
+		y = *(u16 *)packet->tc.y_buf;
+		z1 = 0;
+		z2 = 0;
+	} else {
+		x = packet->tc.x;
+		y = packet->tc.y;
+		z1 = packet->tc.z1;
+		z2 = packet->tc.z2;
+	}
+
+	/* range filtering */
+	if (x == MAX_12BIT)
+		x = 0;
+
+	if (ts->model == 7843) {
+		Rt = ts->pressure_max / 2;
+	} else if (ts->model == 7845) {
+		if (get_pendown_state(ts))
+			Rt = ts->pressure_max / 2;
+		else
+			Rt = 0;
+		dev_vdbg(&ts->spi->dev, "x/y: %d/%d, PD %d\n", x, y, Rt);
+	} else if (likely(x && z1)) {
+		/* compute touch pressure resistance using equation #2 */
+		Rt = z2;
+		Rt -= z1;
+		Rt *= x;
+		Rt *= ts->x_plate_ohms;
+		Rt /= z1;
+		Rt = (Rt + 2047) >> 12;
+	} else {
+		Rt = 0;
+	}
+
+	/*
+	 * Sample found inconsistent by debouncing or pressure is beyond
+	 * the maximum. Don't report it to user space, repeat at least
+	 * once more the measurement
+	 */
+	if (packet->tc.ignore || Rt > ts->pressure_max) {
+		dev_vdbg(&ts->spi->dev, "ignored %d pressure %d\n",
+			 packet->tc.ignore, Rt);
+		return;
+	}
+
+	/*
+	 * Maybe check the pendown state before reporting. This discards
+	 * false readings when the pen is lifted.
+	 */
+	if (ts->penirq_recheck_delay_usecs) {
+		udelay(ts->penirq_recheck_delay_usecs);
+		if (!get_pendown_state(ts))
+			Rt = 0;
+	}
+
+	/*
+	 * NOTE: We can't rely on the pressure to determine the pen down
+	 * state, even this controller has a pressure sensor. The pressure
+	 * value can fluctuate for quite a while after lifting the pen and
+	 * in some cases may not even settle at the expected value.
+	 *
+	 * The only safe way to check for the pen up condition is in the
+	 * timer by reading the pen signal state (it's a GPIO _and_ IRQ).
+	 */
+	if (Rt) {
+		struct input_dev *input = ts->input;
+
+		if (ts->swap_xy)
+			swap(x, y);
+
+		if (!ts->pendown) {
+			input_report_key(input, BTN_TOUCH, 1);
+			ts->pendown = true;
+			dev_vdbg(&ts->spi->dev, "DOWN\n");
+		}
+
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+		input_report_abs(input, ABS_PRESSURE, ts->pressure_max - Rt);
+
+		input_sync(input);
+		dev_vdbg(&ts->spi->dev, "%4d/%4d/%4d\n", x, y, Rt);
+	}
+}
+
+static irqreturn_t ads7846_hard_irq(int irq, void *handle)
+{
+	struct ads7846 *ts = handle;
+
+	return get_pendown_state(ts) ? IRQ_WAKE_THREAD : IRQ_HANDLED;
+}
+
+
+static irqreturn_t ads7846_irq(int irq, void *handle)
+{
+	struct ads7846 *ts = handle;
+
+	/* Start with a small delay before checking pendown state */
+	msleep(TS_POLL_DELAY);
+
+	while (!ts->stopped && get_pendown_state(ts)) {
+
+		/* pen is down, continue with the measurement */
+		ads7846_read_state(ts);
+
+		if (!ts->stopped)
+			ads7846_report_state(ts);
+
+		wait_event_timeout(ts->wait, ts->stopped,
+				   msecs_to_jiffies(TS_POLL_PERIOD));
+	}
+
+	if (ts->pendown) {
+		struct input_dev *input = ts->input;
+
+		input_report_key(input, BTN_TOUCH, 0);
+		input_report_abs(input, ABS_PRESSURE, 0);
+		input_sync(input);
+
+		ts->pendown = false;
+		dev_vdbg(&ts->spi->dev, "UP\n");
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int __maybe_unused ads7846_suspend(struct device *dev)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+
+	mutex_lock(&ts->lock);
+
+	if (!ts->suspended) {
+
+		if (!ts->disabled)
+			__ads7846_disable(ts);
+
+		if (device_may_wakeup(&ts->spi->dev))
+			enable_irq_wake(ts->spi->irq);
+
+		ts->suspended = true;
+	}
+
+	mutex_unlock(&ts->lock);
+
+	return 0;
+}
+
+static int __maybe_unused ads7846_resume(struct device *dev)
+{
+	struct ads7846 *ts = dev_get_drvdata(dev);
+
+	mutex_lock(&ts->lock);
+
+	if (ts->suspended) {
+
+		ts->suspended = false;
+
+		if (device_may_wakeup(&ts->spi->dev))
+			disable_irq_wake(ts->spi->irq);
+
+		if (!ts->disabled)
+			__ads7846_enable(ts);
+	}
+
+	mutex_unlock(&ts->lock);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ads7846_pm, ads7846_suspend, ads7846_resume);
+
+static int ads7846_setup_pendown(struct spi_device *spi,
+				 struct ads7846 *ts,
+				 const struct ads7846_platform_data *pdata)
+{
+	int err;
+
+	/*
+	 * REVISIT when the irq can be triggered active-low, or if for some
+	 * reason the touchscreen isn't hooked up, we don't need to access
+	 * the pendown state.
+	 */
+
+	if (pdata->get_pendown_state) {
+		ts->get_pendown_state = pdata->get_pendown_state;
+	} else if (gpio_is_valid(pdata->gpio_pendown)) {
+
+		err = gpio_request_one(pdata->gpio_pendown, GPIOF_IN,
+				       "ads7846_pendown");
+		if (err) {
+			dev_err(&spi->dev,
+				"failed to request/setup pendown GPIO%d: %d\n",
+				pdata->gpio_pendown, err);
+			return err;
+		}
+
+		ts->gpio_pendown = pdata->gpio_pendown;
+
+		if (pdata->gpio_pendown_debounce)
+			gpio_set_debounce(pdata->gpio_pendown,
+					  pdata->gpio_pendown_debounce);
+	} else {
+		dev_err(&spi->dev, "no get_pendown_state nor gpio_pendown?\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/*
+ * Set up the transfers to read touchscreen state; this assumes we
+ * use formula #2 for pressure, not #3.
+ */
+static void ads7846_setup_spi_msg(struct ads7846 *ts,
+				  const struct ads7846_platform_data *pdata)
+{
+	struct spi_message *m = &ts->msg[0];
+	struct spi_transfer *x = ts->xfer;
+	struct ads7846_packet *packet = ts->packet;
+	int vref = pdata->keep_vref_on;
+
+	if (ts->model == 7873) {
+		/*
+		 * The AD7873 is almost identical to the ADS7846
+		 * keep VREF off during differential/ratiometric
+		 * conversion modes.
+		 */
+		ts->model = 7846;
+		vref = 0;
+	}
+
+	ts->msg_count = 1;
+	spi_message_init(m);
+	m->context = ts;
+
+	if (ts->model == 7845) {
+		packet->read_y_cmd[0] = READ_Y(vref);
+		packet->read_y_cmd[1] = 0;
+		packet->read_y_cmd[2] = 0;
+		x->tx_buf = &packet->read_y_cmd[0];
+		x->rx_buf = &packet->tc.y_buf[0];
+		x->len = 3;
+		spi_message_add_tail(x, m);
+	} else {
+		/* y- still on; turn on only y+ (and ADC) */
+		packet->read_y = READ_Y(vref);
+		x->tx_buf = &packet->read_y;
+		x->len = 1;
+		spi_message_add_tail(x, m);
+
+		x++;
+		x->rx_buf = &packet->tc.y;
+		x->len = 2;
+		spi_message_add_tail(x, m);
+	}
+
+	/*
+	 * The first sample after switching drivers can be low quality;
+	 * optionally discard it, using a second one after the signals
+	 * have had enough time to stabilize.
+	 */
+	if (pdata->settle_delay_usecs) {
+		x->delay_usecs = pdata->settle_delay_usecs;
+
+		x++;
+		x->tx_buf = &packet->read_y;
+		x->len = 1;
+		spi_message_add_tail(x, m);
+
+		x++;
+		x->rx_buf = &packet->tc.y;
+		x->len = 2;
+		spi_message_add_tail(x, m);
+	}
+
+	ts->msg_count++;
+	m++;
+	spi_message_init(m);
+	m->context = ts;
+
+	if (ts->model == 7845) {
+		x++;
+		packet->read_x_cmd[0] = READ_X(vref);
+		packet->read_x_cmd[1] = 0;
+		packet->read_x_cmd[2] = 0;
+		x->tx_buf = &packet->read_x_cmd[0];
+		x->rx_buf = &packet->tc.x_buf[0];
+		x->len = 3;
+		spi_message_add_tail(x, m);
+	} else {
+		/* turn y- off, x+ on, then leave in lowpower */
+		x++;
+		packet->read_x = READ_X(vref);
+		x->tx_buf = &packet->read_x;
+		x->len = 1;
+		spi_message_add_tail(x, m);
+
+		x++;
+		x->rx_buf = &packet->tc.x;
+		x->len = 2;
+		spi_message_add_tail(x, m);
+	}
+
+	/* ... maybe discard first sample ... */
+	if (pdata->settle_delay_usecs) {
+		x->delay_usecs = pdata->settle_delay_usecs;
+
+		x++;
+		x->tx_buf = &packet->read_x;
+		x->len = 1;
+		spi_message_add_tail(x, m);
+
+		x++;
+		x->rx_buf = &packet->tc.x;
+		x->len = 2;
+		spi_message_add_tail(x, m);
+	}
+
+	/* turn y+ off, x- on; we'll use formula #2 */
+	if (ts->model == 7846) {
+		ts->msg_count++;
+		m++;
+		spi_message_init(m);
+		m->context = ts;
+
+		x++;
+		packet->read_z1 = READ_Z1(vref);
+		x->tx_buf = &packet->read_z1;
+		x->len = 1;
+		spi_message_add_tail(x, m);
+
+		x++;
+		x->rx_buf = &packet->tc.z1;
+		x->len = 2;
+		spi_message_add_tail(x, m);
+
+		/* ... maybe discard first sample ... */
+		if (pdata->settle_delay_usecs) {
+			x->delay_usecs = pdata->settle_delay_usecs;
+
+			x++;
+			x->tx_buf = &packet->read_z1;
+			x->len = 1;
+			spi_message_add_tail(x, m);
+
+			x++;
+			x->rx_buf = &packet->tc.z1;
+			x->len = 2;
+			spi_message_add_tail(x, m);
+		}
+
+		ts->msg_count++;
+		m++;
+		spi_message_init(m);
+		m->context = ts;
+
+		x++;
+		packet->read_z2 = READ_Z2(vref);
+		x->tx_buf = &packet->read_z2;
+		x->len = 1;
+		spi_message_add_tail(x, m);
+
+		x++;
+		x->rx_buf = &packet->tc.z2;
+		x->len = 2;
+		spi_message_add_tail(x, m);
+
+		/* ... maybe discard first sample ... */
+		if (pdata->settle_delay_usecs) {
+			x->delay_usecs = pdata->settle_delay_usecs;
+
+			x++;
+			x->tx_buf = &packet->read_z2;
+			x->len = 1;
+			spi_message_add_tail(x, m);
+
+			x++;
+			x->rx_buf = &packet->tc.z2;
+			x->len = 2;
+			spi_message_add_tail(x, m);
+		}
+	}
+
+	/* power down */
+	ts->msg_count++;
+	m++;
+	spi_message_init(m);
+	m->context = ts;
+
+	if (ts->model == 7845) {
+		x++;
+		packet->pwrdown_cmd[0] = PWRDOWN;
+		packet->pwrdown_cmd[1] = 0;
+		packet->pwrdown_cmd[2] = 0;
+		x->tx_buf = &packet->pwrdown_cmd[0];
+		x->len = 3;
+	} else {
+		x++;
+		packet->pwrdown = PWRDOWN;
+		x->tx_buf = &packet->pwrdown;
+		x->len = 1;
+		spi_message_add_tail(x, m);
+
+		x++;
+		x->rx_buf = &packet->dummy;
+		x->len = 2;
+	}
+
+	CS_CHANGE(*x);
+	spi_message_add_tail(x, m);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ads7846_dt_ids[] = {
+	{ .compatible = "ti,tsc2046",	.data = (void *) 7846 },
+	{ .compatible = "ti,ads7843",	.data = (void *) 7843 },
+	{ .compatible = "ti,ads7845",	.data = (void *) 7845 },
+	{ .compatible = "ti,ads7846",	.data = (void *) 7846 },
+	{ .compatible = "ti,ads7873",	.data = (void *) 7873 },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ads7846_dt_ids);
+
+static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
+{
+	struct ads7846_platform_data *pdata;
+	struct device_node *node = dev->of_node;
+	const struct of_device_id *match;
+
+	if (!node) {
+		dev_err(dev, "Device does not have associated DT data\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	match = of_match_device(ads7846_dt_ids, dev);
+	if (!match) {
+		dev_err(dev, "Unknown device model\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->model = (unsigned long)match->data;
+
+	of_property_read_u16(node, "ti,vref-delay-usecs",
+			     &pdata->vref_delay_usecs);
+	of_property_read_u16(node, "ti,vref-mv", &pdata->vref_mv);
+	pdata->keep_vref_on = of_property_read_bool(node, "ti,keep-vref-on");
+
+	pdata->swap_xy = of_property_read_bool(node, "ti,swap-xy");
+
+	of_property_read_u16(node, "ti,settle-delay-usec",
+			     &pdata->settle_delay_usecs);
+	of_property_read_u16(node, "ti,penirq-recheck-delay-usecs",
+			     &pdata->penirq_recheck_delay_usecs);
+
+	of_property_read_u16(node, "ti,x-plate-ohms", &pdata->x_plate_ohms);
+	of_property_read_u16(node, "ti,y-plate-ohms", &pdata->y_plate_ohms);
+
+	of_property_read_u16(node, "ti,x-min", &pdata->x_min);
+	of_property_read_u16(node, "ti,y-min", &pdata->y_min);
+	of_property_read_u16(node, "ti,x-max", &pdata->x_max);
+	of_property_read_u16(node, "ti,y-max", &pdata->y_max);
+
+	of_property_read_u16(node, "ti,pressure-min", &pdata->pressure_min);
+	of_property_read_u16(node, "ti,pressure-max", &pdata->pressure_max);
+
+	of_property_read_u16(node, "ti,debounce-max", &pdata->debounce_max);
+	of_property_read_u16(node, "ti,debounce-tol", &pdata->debounce_tol);
+	of_property_read_u16(node, "ti,debounce-rep", &pdata->debounce_rep);
+
+	of_property_read_u32(node, "ti,pendown-gpio-debounce",
+			     &pdata->gpio_pendown_debounce);
+
+	pdata->wakeup = of_property_read_bool(node, "wakeup-source") ||
+			of_property_read_bool(node, "linux,wakeup");
+
+	pdata->gpio_pendown = of_get_named_gpio(dev->of_node, "pendown-gpio", 0);
+
+	return pdata;
+}
+#else
+static const struct ads7846_platform_data *ads7846_probe_dt(struct device *dev)
+{
+	dev_err(dev, "no platform data defined\n");
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
+static int ads7846_probe(struct spi_device *spi)
+{
+	const struct ads7846_platform_data *pdata;
+	struct ads7846 *ts;
+	struct ads7846_packet *packet;
+	struct input_dev *input_dev;
+	unsigned long irq_flags;
+	int err;
+
+	if (!spi->irq) {
+		dev_dbg(&spi->dev, "no IRQ?\n");
+		return -EINVAL;
+	}
+
+	/* don't exceed max specified sample rate */
+	if (spi->max_speed_hz > (125000 * SAMPLE_BITS)) {
+		dev_err(&spi->dev, "f(sample) %d KHz?\n",
+				(spi->max_speed_hz/SAMPLE_BITS)/1000);
+		return -EINVAL;
+	}
+
+	/*
+	 * We'd set TX word size 8 bits and RX word size to 13 bits ... except
+	 * that even if the hardware can do that, the SPI controller driver
+	 * may not.  So we stick to very-portable 8 bit words, both RX and TX.
+	 */
+	spi->bits_per_word = 8;
+	spi->mode = SPI_MODE_0;
+	err = spi_setup(spi);
+	if (err < 0)
+		return err;
+
+	ts = kzalloc(sizeof(struct ads7846), GFP_KERNEL);
+	packet = kzalloc(sizeof(struct ads7846_packet), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !packet || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	spi_set_drvdata(spi, ts);
+
+	ts->packet = packet;
+	ts->spi = spi;
+	ts->input = input_dev;
+
+	mutex_init(&ts->lock);
+	init_waitqueue_head(&ts->wait);
+
+	pdata = dev_get_platdata(&spi->dev);
+	if (!pdata) {
+		pdata = ads7846_probe_dt(&spi->dev);
+		if (IS_ERR(pdata)) {
+			err = PTR_ERR(pdata);
+			goto err_free_mem;
+		}
+	}
+
+	ts->model = pdata->model ? : 7846;
+	ts->vref_delay_usecs = pdata->vref_delay_usecs ? : 100;
+	ts->x_plate_ohms = pdata->x_plate_ohms ? : 400;
+	ts->pressure_max = pdata->pressure_max ? : ~0;
+
+	ts->vref_mv = pdata->vref_mv;
+	ts->swap_xy = pdata->swap_xy;
+
+	if (pdata->filter != NULL) {
+		if (pdata->filter_init != NULL) {
+			err = pdata->filter_init(pdata, &ts->filter_data);
+			if (err < 0)
+				goto err_free_mem;
+		}
+		ts->filter = pdata->filter;
+		ts->filter_cleanup = pdata->filter_cleanup;
+	} else if (pdata->debounce_max) {
+		ts->debounce_max = pdata->debounce_max;
+		if (ts->debounce_max < 2)
+			ts->debounce_max = 2;
+		ts->debounce_tol = pdata->debounce_tol;
+		ts->debounce_rep = pdata->debounce_rep;
+		ts->filter = ads7846_debounce_filter;
+		ts->filter_data = ts;
+	} else {
+		ts->filter = ads7846_no_filter;
+	}
+
+	err = ads7846_setup_pendown(spi, ts, pdata);
+	if (err)
+		goto err_cleanup_filter;
+
+	if (pdata->penirq_recheck_delay_usecs)
+		ts->penirq_recheck_delay_usecs =
+				pdata->penirq_recheck_delay_usecs;
+
+	ts->wait_for_sync = pdata->wait_for_sync ? : null_wait_for_sync;
+
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(&spi->dev));
+	snprintf(ts->name, sizeof(ts->name), "ADS%d Touchscreen", ts->model);
+
+	input_dev->name = ts->name;
+	input_dev->phys = ts->phys;
+	input_dev->dev.parent = &spi->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X,
+			pdata->x_min ? : 0,
+			pdata->x_max ? : MAX_12BIT,
+			0, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			pdata->y_min ? : 0,
+			pdata->y_max ? : MAX_12BIT,
+			0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE,
+			pdata->pressure_min, pdata->pressure_max, 0, 0);
+
+	ads7846_setup_spi_msg(ts, pdata);
+
+	ts->reg = regulator_get(&spi->dev, "vcc");
+	if (IS_ERR(ts->reg)) {
+		err = PTR_ERR(ts->reg);
+		dev_err(&spi->dev, "unable to get regulator: %d\n", err);
+		goto err_free_gpio;
+	}
+
+	err = regulator_enable(ts->reg);
+	if (err) {
+		dev_err(&spi->dev, "unable to enable regulator: %d\n", err);
+		goto err_put_regulator;
+	}
+
+	irq_flags = pdata->irq_flags ? : IRQF_TRIGGER_FALLING;
+	irq_flags |= IRQF_ONESHOT;
+
+	err = request_threaded_irq(spi->irq, ads7846_hard_irq, ads7846_irq,
+				   irq_flags, spi->dev.driver->name, ts);
+	if (err && !pdata->irq_flags) {
+		dev_info(&spi->dev,
+			"trying pin change workaround on irq %d\n", spi->irq);
+		irq_flags |= IRQF_TRIGGER_RISING;
+		err = request_threaded_irq(spi->irq,
+				  ads7846_hard_irq, ads7846_irq,
+				  irq_flags, spi->dev.driver->name, ts);
+	}
+
+	if (err) {
+		dev_dbg(&spi->dev, "irq %d busy?\n", spi->irq);
+		goto err_disable_regulator;
+	}
+
+	err = ads784x_hwmon_register(spi, ts);
+	if (err)
+		goto err_free_irq;
+
+	dev_info(&spi->dev, "touchscreen, irq %d\n", spi->irq);
+
+	/*
+	 * Take a first sample, leaving nPENIRQ active and vREF off; avoid
+	 * the touchscreen, in case it's not connected.
+	 */
+	if (ts->model == 7845)
+		ads7845_read12_ser(&spi->dev, PWRDOWN);
+	else
+		(void) ads7846_read12_ser(&spi->dev, READ_12BIT_SER(vaux));
+
+	err = sysfs_create_group(&spi->dev.kobj, &ads784x_attr_group);
+	if (err)
+		goto err_remove_hwmon;
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_remove_attr_group;
+
+	device_init_wakeup(&spi->dev, pdata->wakeup);
+
+	/*
+	 * If device does not carry platform data we must have allocated it
+	 * when parsing DT data.
+	 */
+	if (!dev_get_platdata(&spi->dev))
+		devm_kfree(&spi->dev, (void *)pdata);
+
+	return 0;
+
+ err_remove_attr_group:
+	sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
+ err_remove_hwmon:
+	ads784x_hwmon_unregister(spi, ts);
+ err_free_irq:
+	free_irq(spi->irq, ts);
+ err_disable_regulator:
+	regulator_disable(ts->reg);
+ err_put_regulator:
+	regulator_put(ts->reg);
+ err_free_gpio:
+	if (!ts->get_pendown_state)
+		gpio_free(ts->gpio_pendown);
+ err_cleanup_filter:
+	if (ts->filter_cleanup)
+		ts->filter_cleanup(ts->filter_data);
+ err_free_mem:
+	input_free_device(input_dev);
+	kfree(packet);
+	kfree(ts);
+	return err;
+}
+
+static int ads7846_remove(struct spi_device *spi)
+{
+	struct ads7846 *ts = spi_get_drvdata(spi);
+
+	device_init_wakeup(&spi->dev, false);
+
+	sysfs_remove_group(&spi->dev.kobj, &ads784x_attr_group);
+
+	ads7846_disable(ts);
+	free_irq(ts->spi->irq, ts);
+
+	input_unregister_device(ts->input);
+
+	ads784x_hwmon_unregister(spi, ts);
+
+	regulator_disable(ts->reg);
+	regulator_put(ts->reg);
+
+	if (!ts->get_pendown_state) {
+		/*
+		 * If we are not using specialized pendown method we must
+		 * have been relying on gpio we set up ourselves.
+		 */
+		gpio_free(ts->gpio_pendown);
+	}
+
+	if (ts->filter_cleanup)
+		ts->filter_cleanup(ts->filter_data);
+
+	kfree(ts->packet);
+	kfree(ts);
+
+	dev_dbg(&spi->dev, "unregistered touchscreen\n");
+
+	return 0;
+}
+
+static struct spi_driver ads7846_driver = {
+	.driver = {
+		.name	= "ads7846",
+		.pm	= &ads7846_pm,
+		.of_match_table = of_match_ptr(ads7846_dt_ids),
+	},
+	.probe		= ads7846_probe,
+	.remove		= ads7846_remove,
+};
+
+module_spi_driver(ads7846_driver);
+
+MODULE_DESCRIPTION("ADS7846 TouchScreen Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:ads7846");
diff --git a/drivers/input/touchscreen/ar1021_i2c.c b/drivers/input/touchscreen/ar1021_i2c.c
new file mode 100644
index 0000000..71b5a63
--- /dev/null
+++ b/drivers/input/touchscreen/ar1021_i2c.c
@@ -0,0 +1,180 @@
+/*
+ * Microchip AR1021 driver for I2C
+ *
+ * Author: Christian Gmeiner <christian.gmeiner@gmail.com>
+ *
+ * License: GPLv2 as published by the FSF.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#define AR1021_TOCUH_PKG_SIZE	5
+
+#define AR1021_MAX_X	4095
+#define AR1021_MAX_Y	4095
+
+struct ar1021_i2c {
+	struct i2c_client *client;
+	struct input_dev *input;
+	u8 data[AR1021_TOCUH_PKG_SIZE];
+};
+
+static irqreturn_t ar1021_i2c_irq(int irq, void *dev_id)
+{
+	struct ar1021_i2c *ar1021 = dev_id;
+	struct input_dev *input = ar1021->input;
+	u8 *data = ar1021->data;
+	unsigned int x, y, button;
+	int retval;
+
+	retval = i2c_master_recv(ar1021->client,
+				ar1021->data, sizeof(ar1021->data));
+	if (retval != sizeof(ar1021->data))
+		goto out;
+
+	/* sync bit set ? */
+	if ((data[0] & 0x80) == 0)
+		goto out;
+
+	button = data[0] & BIT(0);
+	x = ((data[2] & 0x1f) << 7) | (data[1] & 0x7f);
+	y = ((data[4] & 0x1f) << 7) | (data[3] & 0x7f);
+
+	input_report_abs(input, ABS_X, x);
+	input_report_abs(input, ABS_Y, y);
+	input_report_key(input, BTN_TOUCH, button);
+	input_sync(input);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int ar1021_i2c_open(struct input_dev *dev)
+{
+	struct ar1021_i2c *ar1021 = input_get_drvdata(dev);
+	struct i2c_client *client = ar1021->client;
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void ar1021_i2c_close(struct input_dev *dev)
+{
+	struct ar1021_i2c *ar1021 = input_get_drvdata(dev);
+	struct i2c_client *client = ar1021->client;
+
+	disable_irq(client->irq);
+}
+
+static int ar1021_i2c_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
+{
+	struct ar1021_i2c *ar1021;
+	struct input_dev *input;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "i2c_check_functionality error\n");
+		return -ENXIO;
+	}
+
+	ar1021 = devm_kzalloc(&client->dev, sizeof(*ar1021), GFP_KERNEL);
+	if (!ar1021)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&client->dev);
+	if (!input)
+		return -ENOMEM;
+
+	ar1021->client = client;
+	ar1021->input = input;
+
+	input->name = "ar1021 I2C Touchscreen";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+	input->open = ar1021_i2c_open;
+	input->close = ar1021_i2c_close;
+
+	input_set_capability(input, EV_KEY, BTN_TOUCH);
+	input_set_abs_params(input, ABS_X, 0, AR1021_MAX_X, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, AR1021_MAX_Y, 0, 0);
+
+	input_set_drvdata(input, ar1021);
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, ar1021_i2c_irq,
+					  IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					  "ar1021_i2c", ar1021);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to enable IRQ, error: %d\n", error);
+		return error;
+	}
+
+	/* Disable the IRQ, we'll enable it in ar1021_i2c_open() */
+	disable_irq(client->irq);
+
+	error = input_register_device(ar1021->input);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to register input device, error: %d\n", error);
+		return error;
+	}
+
+	i2c_set_clientdata(client, ar1021);
+	return 0;
+}
+
+static int __maybe_unused ar1021_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	disable_irq(client->irq);
+
+	return 0;
+}
+
+static int __maybe_unused ar1021_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ar1021_i2c_pm, ar1021_i2c_suspend, ar1021_i2c_resume);
+
+static const struct i2c_device_id ar1021_i2c_id[] = {
+	{ "MICROCHIP_AR1021_I2C", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, ar1021_i2c_id);
+
+static const struct of_device_id ar1021_i2c_of_match[] = {
+	{ .compatible = "microchip,ar1021-i2c", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ar1021_i2c_of_match);
+
+static struct i2c_driver ar1021_i2c_driver = {
+	.driver	= {
+		.name	= "ar1021_i2c",
+		.pm	= &ar1021_i2c_pm,
+		.of_match_table = ar1021_i2c_of_match,
+	},
+
+	.probe		= ar1021_i2c_probe,
+	.id_table	= ar1021_i2c_id,
+};
+module_i2c_driver(ar1021_i2c_driver);
+
+MODULE_AUTHOR("Christian Gmeiner <christian.gmeiner@gmail.com>");
+MODULE_DESCRIPTION("Microchip AR1021 I2C Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/atmel-wm97xx.c b/drivers/input/touchscreen/atmel-wm97xx.c
new file mode 100644
index 0000000..7ec0421
--- /dev/null
+++ b/drivers/input/touchscreen/atmel-wm97xx.c
@@ -0,0 +1,436 @@
+/*
+ * Atmel AT91 and AVR32 continuous touch screen driver for Wolfson WM97xx AC97
+ * codecs.
+ *
+ * Copyright (C) 2008 - 2009 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/wm97xx.h>
+#include <linux/timer.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define AC97C_ICA		0x10
+#define AC97C_CBRHR		0x30
+#define AC97C_CBSR		0x38
+#define AC97C_CBMR		0x3c
+#define AC97C_IER		0x54
+#define AC97C_IDR		0x58
+
+#define AC97C_RXRDY		(1 << 4)
+#define AC97C_OVRUN		(1 << 5)
+
+#define AC97C_CMR_SIZE_20	(0 << 16)
+#define AC97C_CMR_SIZE_18	(1 << 16)
+#define AC97C_CMR_SIZE_16	(2 << 16)
+#define AC97C_CMR_SIZE_10	(3 << 16)
+#define AC97C_CMR_CEM_LITTLE	(1 << 18)
+#define AC97C_CMR_CEM_BIG	(0 << 18)
+#define AC97C_CMR_CENA		(1 << 21)
+
+#define AC97C_INT_CBEVT		(1 << 4)
+
+#define AC97C_SR_CAEVT		(1 << 3)
+
+#define AC97C_CH_MASK(slot)						\
+	(0x7 << (3 * (slot - 3)))
+#define AC97C_CH_ASSIGN(slot, channel)					\
+	(AC97C_CHANNEL_##channel << (3 * (slot - 3)))
+#define AC97C_CHANNEL_NONE	0x0
+#define AC97C_CHANNEL_B		0x2
+
+#define ac97c_writel(chip, reg, val)			\
+	__raw_writel((val), (chip)->regs + AC97C_##reg)
+#define ac97c_readl(chip, reg)				\
+	__raw_readl((chip)->regs + AC97C_##reg)
+
+#ifdef CONFIG_CPU_AT32AP700X
+#define ATMEL_WM97XX_AC97C_IOMEM	(0xfff02800)
+#define ATMEL_WM97XX_AC97C_IRQ		(29)
+#define ATMEL_WM97XX_GPIO_DEFAULT	(32+16) /* Pin 16 on port B. */
+#else
+#error Unknown CPU, this driver only supports AT32AP700X CPUs.
+#endif
+
+struct continuous {
+	u16 id;    /* codec id */
+	u8 code;   /* continuous code */
+	u8 reads;  /* number of coord reads per read cycle */
+	u32 speed; /* number of coords per second */
+};
+
+#define WM_READS(sp) ((sp / HZ) + 1)
+
+static const struct continuous cinfo[] = {
+	{WM9705_ID2, 0, WM_READS(94), 94},
+	{WM9705_ID2, 1, WM_READS(188), 188},
+	{WM9705_ID2, 2, WM_READS(375), 375},
+	{WM9705_ID2, 3, WM_READS(750), 750},
+	{WM9712_ID2, 0, WM_READS(94), 94},
+	{WM9712_ID2, 1, WM_READS(188), 188},
+	{WM9712_ID2, 2, WM_READS(375), 375},
+	{WM9712_ID2, 3, WM_READS(750), 750},
+	{WM9713_ID2, 0, WM_READS(94), 94},
+	{WM9713_ID2, 1, WM_READS(120), 120},
+	{WM9713_ID2, 2, WM_READS(154), 154},
+	{WM9713_ID2, 3, WM_READS(188), 188},
+};
+
+/* Continuous speed index. */
+static int sp_idx;
+
+/*
+ * Pen sampling frequency (Hz) in continuous mode.
+ */
+static int cont_rate = 188;
+module_param(cont_rate, int, 0);
+MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
+
+/*
+ * Pen down detection.
+ *
+ * This driver can either poll or use an interrupt to indicate a pen down
+ * event. If the irq request fails then it will fall back to polling mode.
+ */
+static int pen_int = 1;
+module_param(pen_int, int, 0);
+MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
+
+/*
+ * Pressure readback.
+ *
+ * Set to 1 to read back pen down pressure.
+ */
+static int pressure;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
+
+/*
+ * AC97 touch data slot.
+ *
+ * Touch screen readback data ac97 slot.
+ */
+static int ac97_touch_slot = 5;
+module_param(ac97_touch_slot, int, 0);
+MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
+
+/*
+ * GPIO line number.
+ *
+ * Set to GPIO number where the signal from the WM97xx device is hooked up.
+ */
+static int atmel_gpio_line = ATMEL_WM97XX_GPIO_DEFAULT;
+module_param(atmel_gpio_line, int, 0);
+MODULE_PARM_DESC(atmel_gpio_line, "GPIO line number connected to WM97xx");
+
+struct atmel_wm97xx {
+	struct wm97xx		*wm;
+	struct timer_list	pen_timer;
+	void __iomem		*regs;
+	unsigned long		ac97c_irq;
+	unsigned long		gpio_pen;
+	unsigned long		gpio_irq;
+	unsigned short		x;
+	unsigned short		y;
+};
+
+static irqreturn_t atmel_wm97xx_channel_b_interrupt(int irq, void *dev_id)
+{
+	struct atmel_wm97xx *atmel_wm97xx = dev_id;
+	struct wm97xx *wm = atmel_wm97xx->wm;
+	int status = ac97c_readl(atmel_wm97xx, CBSR);
+	irqreturn_t retval = IRQ_NONE;
+
+	if (status & AC97C_OVRUN) {
+		dev_dbg(&wm->touch_dev->dev, "AC97C overrun\n");
+		ac97c_readl(atmel_wm97xx, CBRHR);
+		retval = IRQ_HANDLED;
+	} else if (status & AC97C_RXRDY) {
+		u16 data;
+		u16 value;
+		u16 source;
+		u16 pen_down;
+
+		data = ac97c_readl(atmel_wm97xx, CBRHR);
+		value = data & 0x0fff;
+		source = data & WM97XX_ADCSEL_MASK;
+		pen_down = (data & WM97XX_PEN_DOWN) >> 8;
+
+		if (source == WM97XX_ADCSEL_X)
+			atmel_wm97xx->x = value;
+		if (source == WM97XX_ADCSEL_Y)
+			atmel_wm97xx->y = value;
+
+		if (!pressure && source == WM97XX_ADCSEL_Y) {
+			input_report_abs(wm->input_dev, ABS_X, atmel_wm97xx->x);
+			input_report_abs(wm->input_dev, ABS_Y, atmel_wm97xx->y);
+			input_report_key(wm->input_dev, BTN_TOUCH, pen_down);
+			input_sync(wm->input_dev);
+		} else if (pressure && source == WM97XX_ADCSEL_PRES) {
+			input_report_abs(wm->input_dev, ABS_X, atmel_wm97xx->x);
+			input_report_abs(wm->input_dev, ABS_Y, atmel_wm97xx->y);
+			input_report_abs(wm->input_dev, ABS_PRESSURE, value);
+			input_report_key(wm->input_dev, BTN_TOUCH, value);
+			input_sync(wm->input_dev);
+		}
+
+		retval = IRQ_HANDLED;
+	}
+
+	return retval;
+}
+
+static void atmel_wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(wm->touch_dev);
+	struct input_dev *input_dev = wm->input_dev;
+	int pen_down = gpio_get_value(atmel_wm97xx->gpio_pen);
+
+	if (pen_down != 0) {
+		mod_timer(&atmel_wm97xx->pen_timer,
+			  jiffies + msecs_to_jiffies(1));
+	} else {
+		if (pressure)
+			input_report_abs(input_dev, ABS_PRESSURE, 0);
+		input_report_key(input_dev, BTN_TOUCH, 0);
+		input_sync(input_dev);
+	}
+}
+
+static void atmel_wm97xx_pen_timer(unsigned long data)
+{
+	atmel_wm97xx_acc_pen_up((struct wm97xx *)data);
+}
+
+static int atmel_wm97xx_acc_startup(struct wm97xx *wm)
+{
+	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(wm->touch_dev);
+	int idx = 0;
+
+	if (wm->ac97 == NULL)
+		return -ENODEV;
+
+	for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
+		if (wm->id != cinfo[idx].id)
+			continue;
+
+		sp_idx = idx;
+
+		if (cont_rate <= cinfo[idx].speed)
+			break;
+	}
+
+	wm->acc_rate = cinfo[sp_idx].code;
+	wm->acc_slot = ac97_touch_slot;
+	dev_info(&wm->touch_dev->dev, "atmel accelerated touchscreen driver, "
+			"%d samples/sec\n", cinfo[sp_idx].speed);
+
+	if (pen_int) {
+		unsigned long reg;
+
+		wm->pen_irq = atmel_wm97xx->gpio_irq;
+
+		switch (wm->id) {
+		case WM9712_ID2: /* Fall through. */
+		case WM9713_ID2:
+			/*
+			 * Use GPIO 13 (PEN_DOWN) to assert GPIO line 3
+			 * (PENDOWN).
+			 */
+			wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
+					WM97XX_GPIO_POL_HIGH,
+					WM97XX_GPIO_STICKY,
+					WM97XX_GPIO_WAKE);
+			wm97xx_config_gpio(wm, WM97XX_GPIO_3, WM97XX_GPIO_OUT,
+					WM97XX_GPIO_POL_HIGH,
+					WM97XX_GPIO_NOTSTICKY,
+					WM97XX_GPIO_NOWAKE);
+		case WM9705_ID2: /* Fall through. */
+			/*
+			 * Enable touch data slot in AC97 controller channel B.
+			 */
+			reg = ac97c_readl(atmel_wm97xx, ICA);
+			reg &= ~AC97C_CH_MASK(wm->acc_slot);
+			reg |= AC97C_CH_ASSIGN(wm->acc_slot, B);
+			ac97c_writel(atmel_wm97xx, ICA, reg);
+
+			/*
+			 * Enable channel and interrupt for RXRDY and OVERRUN.
+			 */
+			ac97c_writel(atmel_wm97xx, CBMR, AC97C_CMR_CENA
+					| AC97C_CMR_CEM_BIG
+					| AC97C_CMR_SIZE_16
+					| AC97C_OVRUN
+					| AC97C_RXRDY);
+			/* Dummy read to empty RXRHR. */
+			ac97c_readl(atmel_wm97xx, CBRHR);
+			/*
+			 * Enable interrupt for channel B in the AC97
+			 * controller.
+			 */
+			ac97c_writel(atmel_wm97xx, IER, AC97C_INT_CBEVT);
+			break;
+		default:
+			dev_err(&wm->touch_dev->dev, "pen down irq not "
+					"supported on this device\n");
+			pen_int = 0;
+			break;
+		}
+	}
+
+	return 0;
+}
+
+static void atmel_wm97xx_acc_shutdown(struct wm97xx *wm)
+{
+	if (pen_int) {
+		struct atmel_wm97xx *atmel_wm97xx =
+			platform_get_drvdata(wm->touch_dev);
+		unsigned long ica;
+
+		switch (wm->id & 0xffff) {
+		case WM9705_ID2: /* Fall through. */
+		case WM9712_ID2: /* Fall through. */
+		case WM9713_ID2:
+			/* Disable slot and turn off channel B interrupts. */
+			ica = ac97c_readl(atmel_wm97xx, ICA);
+			ica &= ~AC97C_CH_MASK(wm->acc_slot);
+			ac97c_writel(atmel_wm97xx, ICA, ica);
+			ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT);
+			ac97c_writel(atmel_wm97xx, CBMR, 0);
+			wm->pen_irq = 0;
+			break;
+		default:
+			dev_err(&wm->touch_dev->dev, "unknown codec\n");
+			break;
+		}
+	}
+}
+
+static void atmel_wm97xx_irq_enable(struct wm97xx *wm, int enable)
+{
+	/* Intentionally left empty. */
+}
+
+static struct wm97xx_mach_ops atmel_mach_ops = {
+	.acc_enabled	= 1,
+	.acc_pen_up	= atmel_wm97xx_acc_pen_up,
+	.acc_startup	= atmel_wm97xx_acc_startup,
+	.acc_shutdown	= atmel_wm97xx_acc_shutdown,
+	.irq_enable	= atmel_wm97xx_irq_enable,
+	.irq_gpio	= WM97XX_GPIO_3,
+};
+
+static int __init atmel_wm97xx_probe(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+	struct atmel_wm97xx *atmel_wm97xx;
+	int ret;
+
+	atmel_wm97xx = kzalloc(sizeof(struct atmel_wm97xx), GFP_KERNEL);
+	if (!atmel_wm97xx) {
+		dev_dbg(&pdev->dev, "out of memory\n");
+		return -ENOMEM;
+	}
+
+	atmel_wm97xx->wm	= wm;
+	atmel_wm97xx->regs	= (void *)ATMEL_WM97XX_AC97C_IOMEM;
+	atmel_wm97xx->ac97c_irq	= ATMEL_WM97XX_AC97C_IRQ;
+	atmel_wm97xx->gpio_pen	= atmel_gpio_line;
+	atmel_wm97xx->gpio_irq	= gpio_to_irq(atmel_wm97xx->gpio_pen);
+
+	setup_timer(&atmel_wm97xx->pen_timer, atmel_wm97xx_pen_timer,
+			(unsigned long)wm);
+
+	ret = request_irq(atmel_wm97xx->ac97c_irq,
+			  atmel_wm97xx_channel_b_interrupt,
+			  IRQF_SHARED, "atmel-wm97xx-ch-b", atmel_wm97xx);
+	if (ret) {
+		dev_dbg(&pdev->dev, "could not request ac97c irq\n");
+		goto err;
+	}
+
+	platform_set_drvdata(pdev, atmel_wm97xx);
+
+	ret = wm97xx_register_mach_ops(wm, &atmel_mach_ops);
+	if (ret)
+		goto err_irq;
+
+	return ret;
+
+err_irq:
+	free_irq(atmel_wm97xx->ac97c_irq, atmel_wm97xx);
+err:
+	kfree(atmel_wm97xx);
+	return ret;
+}
+
+static int __exit atmel_wm97xx_remove(struct platform_device *pdev)
+{
+	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
+	struct wm97xx *wm = atmel_wm97xx->wm;
+
+	ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT);
+	free_irq(atmel_wm97xx->ac97c_irq, atmel_wm97xx);
+	del_timer_sync(&atmel_wm97xx->pen_timer);
+	wm97xx_unregister_mach_ops(wm);
+	kfree(atmel_wm97xx);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int atmel_wm97xx_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
+
+	ac97c_writel(atmel_wm97xx, IDR, AC97C_INT_CBEVT);
+	disable_irq(atmel_wm97xx->gpio_irq);
+	del_timer_sync(&atmel_wm97xx->pen_timer);
+
+	return 0;
+}
+
+static int atmel_wm97xx_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct atmel_wm97xx *atmel_wm97xx = platform_get_drvdata(pdev);
+	struct wm97xx *wm = atmel_wm97xx->wm;
+
+	if (wm->input_dev->users) {
+		enable_irq(atmel_wm97xx->gpio_irq);
+		ac97c_writel(atmel_wm97xx, IER, AC97C_INT_CBEVT);
+	}
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(atmel_wm97xx_pm_ops,
+			 atmel_wm97xx_suspend, atmel_wm97xx_resume);
+
+static struct platform_driver atmel_wm97xx_driver = {
+	.remove		= __exit_p(atmel_wm97xx_remove),
+	.driver		= {
+		.name	= "wm97xx-touch",
+		.pm	= &atmel_wm97xx_pm_ops,
+	},
+};
+
+module_platform_driver_probe(atmel_wm97xx_driver, atmel_wm97xx_probe);
+
+MODULE_AUTHOR("Hans-Christian Egtvedt <egtvedt@samfundet.no>");
+MODULE_DESCRIPTION("wm97xx continuous touch driver for Atmel AT91 and AVR32");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c
new file mode 100644
index 0000000..2d5794e
--- /dev/null
+++ b/drivers/input/touchscreen/atmel_mxt_ts.c
@@ -0,0 +1,2760 @@
+/*
+ * Atmel maXTouch Touchscreen driver
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Copyright (C) 2011-2014 Atmel Corporation
+ * Copyright (C) 2012 Google, Inc.
+ *
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/platform_data/atmel_mxt_ts.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+/* Firmware files */
+#define MXT_FW_NAME		"maxtouch.fw"
+#define MXT_CFG_NAME		"maxtouch.cfg"
+#define MXT_CFG_MAGIC		"OBP_RAW V1"
+
+/* Registers */
+#define MXT_OBJECT_START	0x07
+#define MXT_OBJECT_SIZE		6
+#define MXT_INFO_CHECKSUM_SIZE	3
+#define MXT_MAX_BLOCK_WRITE	256
+
+/* Object types */
+#define MXT_DEBUG_DIAGNOSTIC_T37	37
+#define MXT_GEN_MESSAGE_T5		5
+#define MXT_GEN_COMMAND_T6		6
+#define MXT_GEN_POWER_T7		7
+#define MXT_GEN_ACQUIRE_T8		8
+#define MXT_GEN_DATASOURCE_T53		53
+#define MXT_TOUCH_MULTI_T9		9
+#define MXT_TOUCH_KEYARRAY_T15		15
+#define MXT_TOUCH_PROXIMITY_T23		23
+#define MXT_TOUCH_PROXKEY_T52		52
+#define MXT_PROCI_GRIPFACE_T20		20
+#define MXT_PROCG_NOISE_T22		22
+#define MXT_PROCI_ONETOUCH_T24		24
+#define MXT_PROCI_TWOTOUCH_T27		27
+#define MXT_PROCI_GRIP_T40		40
+#define MXT_PROCI_PALM_T41		41
+#define MXT_PROCI_TOUCHSUPPRESSION_T42	42
+#define MXT_PROCI_STYLUS_T47		47
+#define MXT_PROCG_NOISESUPPRESSION_T48	48
+#define MXT_SPT_COMMSCONFIG_T18		18
+#define MXT_SPT_GPIOPWM_T19		19
+#define MXT_SPT_SELFTEST_T25		25
+#define MXT_SPT_CTECONFIG_T28		28
+#define MXT_SPT_USERDATA_T38		38
+#define MXT_SPT_DIGITIZER_T43		43
+#define MXT_SPT_MESSAGECOUNT_T44	44
+#define MXT_SPT_CTECONFIG_T46		46
+#define MXT_TOUCH_MULTITOUCHSCREEN_T100 100
+
+/* MXT_GEN_MESSAGE_T5 object */
+#define MXT_RPTID_NOMSG		0xff
+
+/* MXT_GEN_COMMAND_T6 field */
+#define MXT_COMMAND_RESET	0
+#define MXT_COMMAND_BACKUPNV	1
+#define MXT_COMMAND_CALIBRATE	2
+#define MXT_COMMAND_REPORTALL	3
+#define MXT_COMMAND_DIAGNOSTIC	5
+
+/* Define for T6 status byte */
+#define MXT_T6_STATUS_RESET	(1 << 7)
+#define MXT_T6_STATUS_OFL	(1 << 6)
+#define MXT_T6_STATUS_SIGERR	(1 << 5)
+#define MXT_T6_STATUS_CAL	(1 << 4)
+#define MXT_T6_STATUS_CFGERR	(1 << 3)
+#define MXT_T6_STATUS_COMSERR	(1 << 2)
+
+/* MXT_GEN_POWER_T7 field */
+struct t7_config {
+	u8 idle;
+	u8 active;
+} __packed;
+
+#define MXT_POWER_CFG_RUN		0
+#define MXT_POWER_CFG_DEEPSLEEP		1
+
+/* MXT_TOUCH_MULTI_T9 field */
+#define MXT_T9_CTRL		0
+#define MXT_T9_ORIENT		9
+#define MXT_T9_RANGE		18
+
+/* MXT_TOUCH_MULTI_T9 status */
+#define MXT_T9_UNGRIP		(1 << 0)
+#define MXT_T9_SUPPRESS		(1 << 1)
+#define MXT_T9_AMP		(1 << 2)
+#define MXT_T9_VECTOR		(1 << 3)
+#define MXT_T9_MOVE		(1 << 4)
+#define MXT_T9_RELEASE		(1 << 5)
+#define MXT_T9_PRESS		(1 << 6)
+#define MXT_T9_DETECT		(1 << 7)
+
+struct t9_range {
+	u16 x;
+	u16 y;
+} __packed;
+
+/* MXT_TOUCH_MULTI_T9 orient */
+#define MXT_T9_ORIENT_SWITCH	(1 << 0)
+
+/* MXT_SPT_COMMSCONFIG_T18 */
+#define MXT_COMMS_CTRL		0
+#define MXT_COMMS_CMD		1
+
+/* Define for MXT_GEN_COMMAND_T6 */
+#define MXT_BOOT_VALUE		0xa5
+#define MXT_RESET_VALUE		0x01
+#define MXT_BACKUP_VALUE	0x55
+
+/* T100 Multiple Touch Touchscreen */
+#define MXT_T100_CTRL		0
+#define MXT_T100_CFG1		1
+#define MXT_T100_TCHAUX		3
+#define MXT_T100_XRANGE		13
+#define MXT_T100_YRANGE		24
+
+#define MXT_T100_CFG_SWITCHXY	BIT(5)
+
+#define MXT_T100_TCHAUX_VECT	BIT(0)
+#define MXT_T100_TCHAUX_AMPL	BIT(1)
+#define MXT_T100_TCHAUX_AREA	BIT(2)
+
+#define MXT_T100_DETECT		BIT(7)
+#define MXT_T100_TYPE_MASK	0x70
+
+enum t100_type {
+	MXT_T100_TYPE_FINGER		= 1,
+	MXT_T100_TYPE_PASSIVE_STYLUS	= 2,
+	MXT_T100_TYPE_HOVERING_FINGER	= 4,
+	MXT_T100_TYPE_GLOVE		= 5,
+	MXT_T100_TYPE_LARGE_TOUCH	= 6,
+};
+
+#define MXT_DISTANCE_ACTIVE_TOUCH	0
+#define MXT_DISTANCE_HOVERING		1
+
+#define MXT_TOUCH_MAJOR_DEFAULT		1
+#define MXT_PRESSURE_DEFAULT		1
+
+/* Delay times */
+#define MXT_BACKUP_TIME		50	/* msec */
+#define MXT_RESET_TIME		200	/* msec */
+#define MXT_RESET_TIMEOUT	3000	/* msec */
+#define MXT_CRC_TIMEOUT		1000	/* msec */
+#define MXT_FW_RESET_TIME	3000	/* msec */
+#define MXT_FW_CHG_TIMEOUT	300	/* msec */
+
+/* Command to unlock bootloader */
+#define MXT_UNLOCK_CMD_MSB	0xaa
+#define MXT_UNLOCK_CMD_LSB	0xdc
+
+/* Bootloader mode status */
+#define MXT_WAITING_BOOTLOAD_CMD	0xc0	/* valid 7 6 bit only */
+#define MXT_WAITING_FRAME_DATA	0x80	/* valid 7 6 bit only */
+#define MXT_FRAME_CRC_CHECK	0x02
+#define MXT_FRAME_CRC_FAIL	0x03
+#define MXT_FRAME_CRC_PASS	0x04
+#define MXT_APP_CRC_FAIL	0x40	/* valid 7 8 bit only */
+#define MXT_BOOT_STATUS_MASK	0x3f
+#define MXT_BOOT_EXTENDED_ID	(1 << 5)
+#define MXT_BOOT_ID_MASK	0x1f
+
+/* Touchscreen absolute values */
+#define MXT_MAX_AREA		0xff
+
+#define MXT_PIXELS_PER_MM	20
+
+struct mxt_info {
+	u8 family_id;
+	u8 variant_id;
+	u8 version;
+	u8 build;
+	u8 matrix_xsize;
+	u8 matrix_ysize;
+	u8 object_num;
+};
+
+struct mxt_object {
+	u8 type;
+	u16 start_address;
+	u8 size_minus_one;
+	u8 instances_minus_one;
+	u8 num_report_ids;
+} __packed;
+
+/* Each client has this additional data */
+struct mxt_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	char phys[64];		/* device physical location */
+	const struct mxt_platform_data *pdata;
+	struct mxt_object *object_table;
+	struct mxt_info info;
+	unsigned int irq;
+	unsigned int max_x;
+	unsigned int max_y;
+	bool in_bootloader;
+	u16 mem_size;
+	u8 t100_aux_ampl;
+	u8 t100_aux_area;
+	u8 t100_aux_vect;
+	u8 max_reportid;
+	u32 config_crc;
+	u32 info_crc;
+	u8 bootloader_addr;
+	u8 *msg_buf;
+	u8 t6_status;
+	bool update_input;
+	u8 last_message_count;
+	u8 num_touchids;
+	u8 multitouch;
+	struct t7_config t7_cfg;
+
+	/* Cached parameters from object table */
+	u16 T5_address;
+	u8 T5_msg_size;
+	u8 T6_reportid;
+	u16 T6_address;
+	u16 T7_address;
+	u8 T9_reportid_min;
+	u8 T9_reportid_max;
+	u8 T19_reportid;
+	u16 T44_address;
+	u8 T100_reportid_min;
+	u8 T100_reportid_max;
+
+	/* for fw update in bootloader */
+	struct completion bl_completion;
+
+	/* for reset handling */
+	struct completion reset_completion;
+
+	/* for config update handling */
+	struct completion crc_completion;
+};
+
+static size_t mxt_obj_size(const struct mxt_object *obj)
+{
+	return obj->size_minus_one + 1;
+}
+
+static size_t mxt_obj_instances(const struct mxt_object *obj)
+{
+	return obj->instances_minus_one + 1;
+}
+
+static bool mxt_object_readable(unsigned int type)
+{
+	switch (type) {
+	case MXT_GEN_COMMAND_T6:
+	case MXT_GEN_POWER_T7:
+	case MXT_GEN_ACQUIRE_T8:
+	case MXT_GEN_DATASOURCE_T53:
+	case MXT_TOUCH_MULTI_T9:
+	case MXT_TOUCH_KEYARRAY_T15:
+	case MXT_TOUCH_PROXIMITY_T23:
+	case MXT_TOUCH_PROXKEY_T52:
+	case MXT_PROCI_GRIPFACE_T20:
+	case MXT_PROCG_NOISE_T22:
+	case MXT_PROCI_ONETOUCH_T24:
+	case MXT_PROCI_TWOTOUCH_T27:
+	case MXT_PROCI_GRIP_T40:
+	case MXT_PROCI_PALM_T41:
+	case MXT_PROCI_TOUCHSUPPRESSION_T42:
+	case MXT_PROCI_STYLUS_T47:
+	case MXT_PROCG_NOISESUPPRESSION_T48:
+	case MXT_SPT_COMMSCONFIG_T18:
+	case MXT_SPT_GPIOPWM_T19:
+	case MXT_SPT_SELFTEST_T25:
+	case MXT_SPT_CTECONFIG_T28:
+	case MXT_SPT_USERDATA_T38:
+	case MXT_SPT_DIGITIZER_T43:
+	case MXT_SPT_CTECONFIG_T46:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void mxt_dump_message(struct mxt_data *data, u8 *message)
+{
+	dev_dbg(&data->client->dev, "message: %*ph\n",
+		data->T5_msg_size, message);
+}
+
+static int mxt_wait_for_completion(struct mxt_data *data,
+				   struct completion *comp,
+				   unsigned int timeout_ms)
+{
+	struct device *dev = &data->client->dev;
+	unsigned long timeout = msecs_to_jiffies(timeout_ms);
+	long ret;
+
+	ret = wait_for_completion_interruptible_timeout(comp, timeout);
+	if (ret < 0) {
+		return ret;
+	} else if (ret == 0) {
+		dev_err(dev, "Wait for completion timed out.\n");
+		return -ETIMEDOUT;
+	}
+	return 0;
+}
+
+static int mxt_bootloader_read(struct mxt_data *data,
+			       u8 *val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.flags |= I2C_M_RD;
+	msg.len = count;
+	msg.buf = val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c recv failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_bootloader_write(struct mxt_data *data,
+				const u8 * const val, unsigned int count)
+{
+	int ret;
+	struct i2c_msg msg;
+
+	msg.addr = data->bootloader_addr;
+	msg.flags = data->client->flags & I2C_M_TEN;
+	msg.len = count;
+	msg.buf = (u8 *)val;
+
+	ret = i2c_transfer(data->client->adapter, &msg, 1);
+	if (ret == 1) {
+		ret = 0;
+	} else {
+		ret = ret < 0 ? ret : -EIO;
+		dev_err(&data->client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int mxt_lookup_bootloader_address(struct mxt_data *data, bool retry)
+{
+	u8 appmode = data->client->addr;
+	u8 bootloader;
+
+	switch (appmode) {
+	case 0x4a:
+	case 0x4b:
+		/* Chips after 1664S use different scheme */
+		if (retry || data->info.family_id >= 0xa2) {
+			bootloader = appmode - 0x24;
+			break;
+		}
+		/* Fall through for normal case */
+	case 0x4c:
+	case 0x4d:
+	case 0x5a:
+	case 0x5b:
+		bootloader = appmode - 0x26;
+		break;
+
+	default:
+		dev_err(&data->client->dev,
+			"Appmode i2c address 0x%02x not found\n",
+			appmode);
+		return -EINVAL;
+	}
+
+	data->bootloader_addr = bootloader;
+	return 0;
+}
+
+static int mxt_probe_bootloader(struct mxt_data *data, bool alt_address)
+{
+	struct device *dev = &data->client->dev;
+	int error;
+	u8 val;
+	bool crc_failure;
+
+	error = mxt_lookup_bootloader_address(data, alt_address);
+	if (error)
+		return error;
+
+	error = mxt_bootloader_read(data, &val, 1);
+	if (error)
+		return error;
+
+	/* Check app crc fail mode */
+	crc_failure = (val & ~MXT_BOOT_STATUS_MASK) == MXT_APP_CRC_FAIL;
+
+	dev_err(dev, "Detected bootloader, status:%02X%s\n",
+			val, crc_failure ? ", APP_CRC_FAIL" : "");
+
+	return 0;
+}
+
+static u8 mxt_get_bootloader_version(struct mxt_data *data, u8 val)
+{
+	struct device *dev = &data->client->dev;
+	u8 buf[3];
+
+	if (val & MXT_BOOT_EXTENDED_ID) {
+		if (mxt_bootloader_read(data, &buf[0], 3) != 0) {
+			dev_err(dev, "%s: i2c failure\n", __func__);
+			return val;
+		}
+
+		dev_dbg(dev, "Bootloader ID:%d Version:%d\n", buf[1], buf[2]);
+
+		return buf[0];
+	} else {
+		dev_dbg(dev, "Bootloader ID:%d\n", val & MXT_BOOT_ID_MASK);
+
+		return val;
+	}
+}
+
+static int mxt_check_bootloader(struct mxt_data *data, unsigned int state,
+				bool wait)
+{
+	struct device *dev = &data->client->dev;
+	u8 val;
+	int ret;
+
+recheck:
+	if (wait) {
+		/*
+		 * In application update mode, the interrupt
+		 * line signals state transitions. We must wait for the
+		 * CHG assertion before reading the status byte.
+		 * Once the status byte has been read, the line is deasserted.
+		 */
+		ret = mxt_wait_for_completion(data, &data->bl_completion,
+					      MXT_FW_CHG_TIMEOUT);
+		if (ret) {
+			/*
+			 * TODO: handle -ERESTARTSYS better by terminating
+			 * fw update process before returning to userspace
+			 * by writing length 0x000 to device (iff we are in
+			 * WAITING_FRAME_DATA state).
+			 */
+			dev_err(dev, "Update wait error %d\n", ret);
+			return ret;
+		}
+	}
+
+	ret = mxt_bootloader_read(data, &val, 1);
+	if (ret)
+		return ret;
+
+	if (state == MXT_WAITING_BOOTLOAD_CMD)
+		val = mxt_get_bootloader_version(data, val);
+
+	switch (state) {
+	case MXT_WAITING_BOOTLOAD_CMD:
+	case MXT_WAITING_FRAME_DATA:
+	case MXT_APP_CRC_FAIL:
+		val &= ~MXT_BOOT_STATUS_MASK;
+		break;
+	case MXT_FRAME_CRC_PASS:
+		if (val == MXT_FRAME_CRC_CHECK) {
+			goto recheck;
+		} else if (val == MXT_FRAME_CRC_FAIL) {
+			dev_err(dev, "Bootloader CRC fail\n");
+			return -EINVAL;
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (val != state) {
+		dev_err(dev, "Invalid bootloader state %02X != %02X\n",
+			val, state);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int mxt_send_bootloader_cmd(struct mxt_data *data, bool unlock)
+{
+	int ret;
+	u8 buf[2];
+
+	if (unlock) {
+		buf[0] = MXT_UNLOCK_CMD_LSB;
+		buf[1] = MXT_UNLOCK_CMD_MSB;
+	} else {
+		buf[0] = 0x01;
+		buf[1] = 0x01;
+	}
+
+	ret = mxt_bootloader_write(data, buf, 2);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int __mxt_read_reg(struct i2c_client *client,
+			       u16 reg, u16 len, void *val)
+{
+	struct i2c_msg xfer[2];
+	u8 buf[2];
+	int ret;
+
+	buf[0] = reg & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+
+	/* Write register */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = 0;
+	xfer[0].len = 2;
+	xfer[0].buf = buf;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = len;
+	xfer[1].buf = val;
+
+	ret = i2c_transfer(client->adapter, xfer, 2);
+	if (ret == 2) {
+		ret = 0;
+	} else {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "%s: i2c transfer failed (%d)\n",
+			__func__, ret);
+	}
+
+	return ret;
+}
+
+static int __mxt_write_reg(struct i2c_client *client, u16 reg, u16 len,
+			   const void *val)
+{
+	u8 *buf;
+	size_t count;
+	int ret;
+
+	count = len + 2;
+	buf = kmalloc(count, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = reg & 0xff;
+	buf[1] = (reg >> 8) & 0xff;
+	memcpy(&buf[2], val, len);
+
+	ret = i2c_master_send(client, buf, count);
+	if (ret == count) {
+		ret = 0;
+	} else {
+		if (ret >= 0)
+			ret = -EIO;
+		dev_err(&client->dev, "%s: i2c send failed (%d)\n",
+			__func__, ret);
+	}
+
+	kfree(buf);
+	return ret;
+}
+
+static int mxt_write_reg(struct i2c_client *client, u16 reg, u8 val)
+{
+	return __mxt_write_reg(client, reg, 1, &val);
+}
+
+static struct mxt_object *
+mxt_get_object(struct mxt_data *data, u8 type)
+{
+	struct mxt_object *object;
+	int i;
+
+	for (i = 0; i < data->info.object_num; i++) {
+		object = data->object_table + i;
+		if (object->type == type)
+			return object;
+	}
+
+	dev_warn(&data->client->dev, "Invalid object type T%u\n", type);
+	return NULL;
+}
+
+static void mxt_proc_t6_messages(struct mxt_data *data, u8 *msg)
+{
+	struct device *dev = &data->client->dev;
+	u8 status = msg[1];
+	u32 crc = msg[2] | (msg[3] << 8) | (msg[4] << 16);
+
+	complete(&data->crc_completion);
+
+	if (crc != data->config_crc) {
+		data->config_crc = crc;
+		dev_dbg(dev, "T6 Config Checksum: 0x%06X\n", crc);
+	}
+
+	/* Detect reset */
+	if (status & MXT_T6_STATUS_RESET)
+		complete(&data->reset_completion);
+
+	/* Output debug if status has changed */
+	if (status != data->t6_status)
+		dev_dbg(dev, "T6 Status 0x%02X%s%s%s%s%s%s%s\n",
+			status,
+			status == 0 ? " OK" : "",
+			status & MXT_T6_STATUS_RESET ? " RESET" : "",
+			status & MXT_T6_STATUS_OFL ? " OFL" : "",
+			status & MXT_T6_STATUS_SIGERR ? " SIGERR" : "",
+			status & MXT_T6_STATUS_CAL ? " CAL" : "",
+			status & MXT_T6_STATUS_CFGERR ? " CFGERR" : "",
+			status & MXT_T6_STATUS_COMSERR ? " COMSERR" : "");
+
+	/* Save current status */
+	data->t6_status = status;
+}
+
+static int mxt_write_object(struct mxt_data *data,
+				 u8 type, u8 offset, u8 val)
+{
+	struct mxt_object *object;
+	u16 reg;
+
+	object = mxt_get_object(data, type);
+	if (!object || offset >= mxt_obj_size(object))
+		return -EINVAL;
+
+	reg = object->start_address;
+	return mxt_write_reg(data->client, reg + offset, val);
+}
+
+static void mxt_input_button(struct mxt_data *data, u8 *message)
+{
+	struct input_dev *input = data->input_dev;
+	const struct mxt_platform_data *pdata = data->pdata;
+	int i;
+
+	for (i = 0; i < pdata->t19_num_keys; i++) {
+		if (pdata->t19_keymap[i] == KEY_RESERVED)
+			continue;
+
+		/* Active-low switch */
+		input_report_key(input, pdata->t19_keymap[i],
+				 !(message[1] & BIT(i)));
+	}
+}
+
+static void mxt_input_sync(struct mxt_data *data)
+{
+	input_mt_report_pointer_emulation(data->input_dev,
+					  data->pdata->t19_num_keys);
+	input_sync(data->input_dev);
+}
+
+static void mxt_proc_t9_message(struct mxt_data *data, u8 *message)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev = data->input_dev;
+	int id;
+	u8 status;
+	int x;
+	int y;
+	int area;
+	int amplitude;
+
+	id = message[0] - data->T9_reportid_min;
+	status = message[1];
+	x = (message[2] << 4) | ((message[4] >> 4) & 0xf);
+	y = (message[3] << 4) | ((message[4] & 0xf));
+
+	/* Handle 10/12 bit switching */
+	if (data->max_x < 1024)
+		x >>= 2;
+	if (data->max_y < 1024)
+		y >>= 2;
+
+	area = message[5];
+	amplitude = message[6];
+
+	dev_dbg(dev,
+		"[%u] %c%c%c%c%c%c%c%c x: %5u y: %5u area: %3u amp: %3u\n",
+		id,
+		(status & MXT_T9_DETECT) ? 'D' : '.',
+		(status & MXT_T9_PRESS) ? 'P' : '.',
+		(status & MXT_T9_RELEASE) ? 'R' : '.',
+		(status & MXT_T9_MOVE) ? 'M' : '.',
+		(status & MXT_T9_VECTOR) ? 'V' : '.',
+		(status & MXT_T9_AMP) ? 'A' : '.',
+		(status & MXT_T9_SUPPRESS) ? 'S' : '.',
+		(status & MXT_T9_UNGRIP) ? 'U' : '.',
+		x, y, area, amplitude);
+
+	input_mt_slot(input_dev, id);
+
+	if (status & MXT_T9_DETECT) {
+		/*
+		 * Multiple bits may be set if the host is slow to read
+		 * the status messages, indicating all the events that
+		 * have happened.
+		 */
+		if (status & MXT_T9_RELEASE) {
+			input_mt_report_slot_state(input_dev,
+						   MT_TOOL_FINGER, 0);
+			mxt_input_sync(data);
+		}
+
+		/* Touch active */
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 1);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, amplitude);
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, area);
+	} else {
+		/* Touch no longer active, close out slot */
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, 0);
+	}
+
+	data->update_input = true;
+}
+
+static void mxt_proc_t100_message(struct mxt_data *data, u8 *message)
+{
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev = data->input_dev;
+	int id;
+	u8 status;
+	u8 type = 0;
+	u16 x;
+	u16 y;
+	int distance = 0;
+	int tool = 0;
+	u8 major = 0;
+	u8 pressure = 0;
+	u8 orientation = 0;
+
+	id = message[0] - data->T100_reportid_min - 2;
+
+	/* ignore SCRSTATUS events */
+	if (id < 0)
+		return;
+
+	status = message[1];
+	x = get_unaligned_le16(&message[2]);
+	y = get_unaligned_le16(&message[4]);
+
+	if (status & MXT_T100_DETECT) {
+		type = (status & MXT_T100_TYPE_MASK) >> 4;
+
+		switch (type) {
+		case MXT_T100_TYPE_HOVERING_FINGER:
+			tool = MT_TOOL_FINGER;
+			distance = MXT_DISTANCE_HOVERING;
+
+			if (data->t100_aux_vect)
+				orientation = message[data->t100_aux_vect];
+
+			break;
+
+		case MXT_T100_TYPE_FINGER:
+		case MXT_T100_TYPE_GLOVE:
+			tool = MT_TOOL_FINGER;
+			distance = MXT_DISTANCE_ACTIVE_TOUCH;
+
+			if (data->t100_aux_area)
+				major = message[data->t100_aux_area];
+
+			if (data->t100_aux_ampl)
+				pressure = message[data->t100_aux_ampl];
+
+			if (data->t100_aux_vect)
+				orientation = message[data->t100_aux_vect];
+
+			break;
+
+		case MXT_T100_TYPE_PASSIVE_STYLUS:
+			tool = MT_TOOL_PEN;
+
+			/*
+			 * Passive stylus is reported with size zero so
+			 * hardcode.
+			 */
+			major = MXT_TOUCH_MAJOR_DEFAULT;
+
+			if (data->t100_aux_ampl)
+				pressure = message[data->t100_aux_ampl];
+
+			break;
+
+		case MXT_T100_TYPE_LARGE_TOUCH:
+			/* Ignore suppressed touch */
+			break;
+
+		default:
+			dev_dbg(dev, "Unexpected T100 type\n");
+			return;
+		}
+	}
+
+	/*
+	 * Values reported should be non-zero if tool is touching the
+	 * device
+	 */
+	if (!pressure && type != MXT_T100_TYPE_HOVERING_FINGER)
+		pressure = MXT_PRESSURE_DEFAULT;
+
+	input_mt_slot(input_dev, id);
+
+	if (status & MXT_T100_DETECT) {
+		dev_dbg(dev, "[%u] type:%u x:%u y:%u a:%02X p:%02X v:%02X\n",
+			id, type, x, y, major, pressure, orientation);
+
+		input_mt_report_slot_state(input_dev, tool, 1);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, major);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, pressure);
+		input_report_abs(input_dev, ABS_MT_DISTANCE, distance);
+		input_report_abs(input_dev, ABS_MT_ORIENTATION, orientation);
+	} else {
+		dev_dbg(dev, "[%u] release\n", id);
+
+		/* close out slot */
+		input_mt_report_slot_state(input_dev, 0, 0);
+	}
+
+	data->update_input = true;
+}
+
+static int mxt_proc_message(struct mxt_data *data, u8 *message)
+{
+	u8 report_id = message[0];
+
+	if (report_id == MXT_RPTID_NOMSG)
+		return 0;
+
+	if (report_id == data->T6_reportid) {
+		mxt_proc_t6_messages(data, message);
+	} else if (!data->input_dev) {
+		/*
+		 * Do not report events if input device
+		 * is not yet registered.
+		 */
+		mxt_dump_message(data, message);
+	} else if (report_id >= data->T9_reportid_min &&
+		   report_id <= data->T9_reportid_max) {
+		mxt_proc_t9_message(data, message);
+	} else if (report_id >= data->T100_reportid_min &&
+		   report_id <= data->T100_reportid_max) {
+		mxt_proc_t100_message(data, message);
+	} else if (report_id == data->T19_reportid) {
+		mxt_input_button(data, message);
+		data->update_input = true;
+	} else {
+		mxt_dump_message(data, message);
+	}
+
+	return 1;
+}
+
+static int mxt_read_and_process_messages(struct mxt_data *data, u8 count)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	int i;
+	u8 num_valid = 0;
+
+	/* Safety check for msg_buf */
+	if (count > data->max_reportid)
+		return -EINVAL;
+
+	/* Process remaining messages if necessary */
+	ret = __mxt_read_reg(data->client, data->T5_address,
+				data->T5_msg_size * count, data->msg_buf);
+	if (ret) {
+		dev_err(dev, "Failed to read %u messages (%d)\n", count, ret);
+		return ret;
+	}
+
+	for (i = 0;  i < count; i++) {
+		ret = mxt_proc_message(data,
+			data->msg_buf + data->T5_msg_size * i);
+
+		if (ret == 1)
+			num_valid++;
+	}
+
+	/* return number of messages read */
+	return num_valid;
+}
+
+static irqreturn_t mxt_process_messages_t44(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret;
+	u8 count, num_left;
+
+	/* Read T44 and T5 together */
+	ret = __mxt_read_reg(data->client, data->T44_address,
+		data->T5_msg_size + 1, data->msg_buf);
+	if (ret) {
+		dev_err(dev, "Failed to read T44 and T5 (%d)\n", ret);
+		return IRQ_NONE;
+	}
+
+	count = data->msg_buf[0];
+
+	/*
+	 * This condition may be caused by the CHG line being configured in
+	 * Mode 0. It results in unnecessary I2C operations but it is benign.
+	 */
+	if (count == 0)
+		return IRQ_NONE;
+
+	if (count > data->max_reportid) {
+		dev_warn(dev, "T44 count %d exceeded max report id\n", count);
+		count = data->max_reportid;
+	}
+
+	/* Process first message */
+	ret = mxt_proc_message(data, data->msg_buf + 1);
+	if (ret < 0) {
+		dev_warn(dev, "Unexpected invalid message\n");
+		return IRQ_NONE;
+	}
+
+	num_left = count - 1;
+
+	/* Process remaining messages if necessary */
+	if (num_left) {
+		ret = mxt_read_and_process_messages(data, num_left);
+		if (ret < 0)
+			goto end;
+		else if (ret != num_left)
+			dev_warn(dev, "Unexpected invalid message\n");
+	}
+
+end:
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int mxt_process_messages_until_invalid(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int count, read;
+	u8 tries = 2;
+
+	count = data->max_reportid;
+
+	/* Read messages until we force an invalid */
+	do {
+		read = mxt_read_and_process_messages(data, count);
+		if (read < count)
+			return 0;
+	} while (--tries);
+
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
+
+	dev_err(dev, "CHG pin isn't cleared\n");
+	return -EBUSY;
+}
+
+static irqreturn_t mxt_process_messages(struct mxt_data *data)
+{
+	int total_handled, num_handled;
+	u8 count = data->last_message_count;
+
+	if (count < 1 || count > data->max_reportid)
+		count = 1;
+
+	/* include final invalid message */
+	total_handled = mxt_read_and_process_messages(data, count + 1);
+	if (total_handled < 0)
+		return IRQ_NONE;
+	/* if there were invalid messages, then we are done */
+	else if (total_handled <= count)
+		goto update_count;
+
+	/* keep reading two msgs until one is invalid or reportid limit */
+	do {
+		num_handled = mxt_read_and_process_messages(data, 2);
+		if (num_handled < 0)
+			return IRQ_NONE;
+
+		total_handled += num_handled;
+
+		if (num_handled < 2)
+			break;
+	} while (total_handled < data->num_touchids);
+
+update_count:
+	data->last_message_count = total_handled;
+
+	if (data->update_input) {
+		mxt_input_sync(data);
+		data->update_input = false;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t mxt_interrupt(int irq, void *dev_id)
+{
+	struct mxt_data *data = dev_id;
+
+	if (data->in_bootloader) {
+		/* bootloader state transition completion */
+		complete(&data->bl_completion);
+		return IRQ_HANDLED;
+	}
+
+	if (!data->object_table)
+		return IRQ_HANDLED;
+
+	if (data->T44_address) {
+		return mxt_process_messages_t44(data);
+	} else {
+		return mxt_process_messages(data);
+	}
+}
+
+static int mxt_t6_command(struct mxt_data *data, u16 cmd_offset,
+			  u8 value, bool wait)
+{
+	u16 reg;
+	u8 command_register;
+	int timeout_counter = 0;
+	int ret;
+
+	reg = data->T6_address + cmd_offset;
+
+	ret = mxt_write_reg(data->client, reg, value);
+	if (ret)
+		return ret;
+
+	if (!wait)
+		return 0;
+
+	do {
+		msleep(20);
+		ret = __mxt_read_reg(data->client, reg, 1, &command_register);
+		if (ret)
+			return ret;
+	} while (command_register != 0 && timeout_counter++ <= 100);
+
+	if (timeout_counter > 100) {
+		dev_err(&data->client->dev, "Command failed!\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int mxt_soft_reset(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int ret = 0;
+
+	dev_info(dev, "Resetting device\n");
+
+	disable_irq(data->irq);
+
+	reinit_completion(&data->reset_completion);
+
+	ret = mxt_t6_command(data, MXT_COMMAND_RESET, MXT_RESET_VALUE, false);
+	if (ret)
+		return ret;
+
+	/* Ignore CHG line for 100ms after reset */
+	msleep(100);
+
+	enable_irq(data->irq);
+
+	ret = mxt_wait_for_completion(data, &data->reset_completion,
+				      MXT_RESET_TIMEOUT);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void mxt_update_crc(struct mxt_data *data, u8 cmd, u8 value)
+{
+	/*
+	 * On failure, CRC is set to 0 and config will always be
+	 * downloaded.
+	 */
+	data->config_crc = 0;
+	reinit_completion(&data->crc_completion);
+
+	mxt_t6_command(data, cmd, value, true);
+
+	/*
+	 * Wait for crc message. On failure, CRC is set to 0 and config will
+	 * always be downloaded.
+	 */
+	mxt_wait_for_completion(data, &data->crc_completion, MXT_CRC_TIMEOUT);
+}
+
+static void mxt_calc_crc24(u32 *crc, u8 firstbyte, u8 secondbyte)
+{
+	static const unsigned int crcpoly = 0x80001B;
+	u32 result;
+	u32 data_word;
+
+	data_word = (secondbyte << 8) | firstbyte;
+	result = ((*crc << 1) ^ data_word);
+
+	if (result & 0x1000000)
+		result ^= crcpoly;
+
+	*crc = result;
+}
+
+static u32 mxt_calculate_crc(u8 *base, off_t start_off, off_t end_off)
+{
+	u32 crc = 0;
+	u8 *ptr = base + start_off;
+	u8 *last_val = base + end_off - 1;
+
+	if (end_off < start_off)
+		return -EINVAL;
+
+	while (ptr < last_val) {
+		mxt_calc_crc24(&crc, *ptr, *(ptr + 1));
+		ptr += 2;
+	}
+
+	/* if len is odd, fill the last byte with 0 */
+	if (ptr == last_val)
+		mxt_calc_crc24(&crc, *ptr, 0);
+
+	/* Mask to 24-bit */
+	crc &= 0x00FFFFFF;
+
+	return crc;
+}
+
+static int mxt_prepare_cfg_mem(struct mxt_data *data,
+			       const struct firmware *cfg,
+			       unsigned int data_pos,
+			       unsigned int cfg_start_ofs,
+			       u8 *config_mem,
+			       size_t config_mem_size)
+{
+	struct device *dev = &data->client->dev;
+	struct mxt_object *object;
+	unsigned int type, instance, size, byte_offset;
+	int offset;
+	int ret;
+	int i;
+	u16 reg;
+	u8 val;
+
+	while (data_pos < cfg->size) {
+		/* Read type, instance, length */
+		ret = sscanf(cfg->data + data_pos, "%x %x %x%n",
+			     &type, &instance, &size, &offset);
+		if (ret == 0) {
+			/* EOF */
+			break;
+		} else if (ret != 3) {
+			dev_err(dev, "Bad format: failed to parse object\n");
+			return -EINVAL;
+		}
+		data_pos += offset;
+
+		object = mxt_get_object(data, type);
+		if (!object) {
+			/* Skip object */
+			for (i = 0; i < size; i++) {
+				ret = sscanf(cfg->data + data_pos, "%hhx%n",
+					     &val, &offset);
+				if (ret != 1) {
+					dev_err(dev, "Bad format in T%d at %d\n",
+						type, i);
+					return -EINVAL;
+				}
+				data_pos += offset;
+			}
+			continue;
+		}
+
+		if (size > mxt_obj_size(object)) {
+			/*
+			 * Either we are in fallback mode due to wrong
+			 * config or config from a later fw version,
+			 * or the file is corrupt or hand-edited.
+			 */
+			dev_warn(dev, "Discarding %zu byte(s) in T%u\n",
+				 size - mxt_obj_size(object), type);
+		} else if (mxt_obj_size(object) > size) {
+			/*
+			 * If firmware is upgraded, new bytes may be added to
+			 * end of objects. It is generally forward compatible
+			 * to zero these bytes - previous behaviour will be
+			 * retained. However this does invalidate the CRC and
+			 * will force fallback mode until the configuration is
+			 * updated. We warn here but do nothing else - the
+			 * malloc has zeroed the entire configuration.
+			 */
+			dev_warn(dev, "Zeroing %zu byte(s) in T%d\n",
+				 mxt_obj_size(object) - size, type);
+		}
+
+		if (instance >= mxt_obj_instances(object)) {
+			dev_err(dev, "Object instances exceeded!\n");
+			return -EINVAL;
+		}
+
+		reg = object->start_address + mxt_obj_size(object) * instance;
+
+		for (i = 0; i < size; i++) {
+			ret = sscanf(cfg->data + data_pos, "%hhx%n",
+				     &val,
+				     &offset);
+			if (ret != 1) {
+				dev_err(dev, "Bad format in T%d at %d\n",
+					type, i);
+				return -EINVAL;
+			}
+			data_pos += offset;
+
+			if (i > mxt_obj_size(object))
+				continue;
+
+			byte_offset = reg + i - cfg_start_ofs;
+
+			if (byte_offset >= 0 && byte_offset < config_mem_size) {
+				*(config_mem + byte_offset) = val;
+			} else {
+				dev_err(dev, "Bad object: reg:%d, T%d, ofs=%d\n",
+					reg, object->type, byte_offset);
+				return -EINVAL;
+			}
+		}
+	}
+
+	return 0;
+}
+
+static int mxt_upload_cfg_mem(struct mxt_data *data, unsigned int cfg_start,
+			      u8 *config_mem, size_t config_mem_size)
+{
+	unsigned int byte_offset = 0;
+	int error;
+
+	/* Write configuration as blocks */
+	while (byte_offset < config_mem_size) {
+		unsigned int size = config_mem_size - byte_offset;
+
+		if (size > MXT_MAX_BLOCK_WRITE)
+			size = MXT_MAX_BLOCK_WRITE;
+
+		error = __mxt_write_reg(data->client,
+					cfg_start + byte_offset,
+					size, config_mem + byte_offset);
+		if (error) {
+			dev_err(&data->client->dev,
+				"Config write error, ret=%d\n", error);
+			return error;
+		}
+
+		byte_offset += size;
+	}
+
+	return 0;
+}
+
+static int mxt_init_t7_power_cfg(struct mxt_data *data);
+
+/*
+ * mxt_update_cfg - download configuration to chip
+ *
+ * Atmel Raw Config File Format
+ *
+ * The first four lines of the raw config file contain:
+ *  1) Version
+ *  2) Chip ID Information (first 7 bytes of device memory)
+ *  3) Chip Information Block 24-bit CRC Checksum
+ *  4) Chip Configuration 24-bit CRC Checksum
+ *
+ * The rest of the file consists of one line per object instance:
+ *   <TYPE> <INSTANCE> <SIZE> <CONTENTS>
+ *
+ *   <TYPE> - 2-byte object type as hex
+ *   <INSTANCE> - 2-byte object instance number as hex
+ *   <SIZE> - 2-byte object size as hex
+ *   <CONTENTS> - array of <SIZE> 1-byte hex values
+ */
+static int mxt_update_cfg(struct mxt_data *data, const struct firmware *cfg)
+{
+	struct device *dev = &data->client->dev;
+	struct mxt_info cfg_info;
+	int ret;
+	int offset;
+	int data_pos;
+	int i;
+	int cfg_start_ofs;
+	u32 info_crc, config_crc, calculated_crc;
+	u8 *config_mem;
+	size_t config_mem_size;
+
+	mxt_update_crc(data, MXT_COMMAND_REPORTALL, 1);
+
+	if (strncmp(cfg->data, MXT_CFG_MAGIC, strlen(MXT_CFG_MAGIC))) {
+		dev_err(dev, "Unrecognised config file\n");
+		return -EINVAL;
+	}
+
+	data_pos = strlen(MXT_CFG_MAGIC);
+
+	/* Load information block and check */
+	for (i = 0; i < sizeof(struct mxt_info); i++) {
+		ret = sscanf(cfg->data + data_pos, "%hhx%n",
+			     (unsigned char *)&cfg_info + i,
+			     &offset);
+		if (ret != 1) {
+			dev_err(dev, "Bad format\n");
+			return -EINVAL;
+		}
+
+		data_pos += offset;
+	}
+
+	if (cfg_info.family_id != data->info.family_id) {
+		dev_err(dev, "Family ID mismatch!\n");
+		return -EINVAL;
+	}
+
+	if (cfg_info.variant_id != data->info.variant_id) {
+		dev_err(dev, "Variant ID mismatch!\n");
+		return -EINVAL;
+	}
+
+	/* Read CRCs */
+	ret = sscanf(cfg->data + data_pos, "%x%n", &info_crc, &offset);
+	if (ret != 1) {
+		dev_err(dev, "Bad format: failed to parse Info CRC\n");
+		return -EINVAL;
+	}
+	data_pos += offset;
+
+	ret = sscanf(cfg->data + data_pos, "%x%n", &config_crc, &offset);
+	if (ret != 1) {
+		dev_err(dev, "Bad format: failed to parse Config CRC\n");
+		return -EINVAL;
+	}
+	data_pos += offset;
+
+	/*
+	 * The Info Block CRC is calculated over mxt_info and the object
+	 * table. If it does not match then we are trying to load the
+	 * configuration from a different chip or firmware version, so
+	 * the configuration CRC is invalid anyway.
+	 */
+	if (info_crc == data->info_crc) {
+		if (config_crc == 0 || data->config_crc == 0) {
+			dev_info(dev, "CRC zero, attempting to apply config\n");
+		} else if (config_crc == data->config_crc) {
+			dev_dbg(dev, "Config CRC 0x%06X: OK\n",
+				 data->config_crc);
+			return 0;
+		} else {
+			dev_info(dev, "Config CRC 0x%06X: does not match file 0x%06X\n",
+				 data->config_crc, config_crc);
+		}
+	} else {
+		dev_warn(dev,
+			 "Warning: Info CRC error - device=0x%06X file=0x%06X\n",
+			 data->info_crc, info_crc);
+	}
+
+	/* Malloc memory to store configuration */
+	cfg_start_ofs = MXT_OBJECT_START +
+			data->info.object_num * sizeof(struct mxt_object) +
+			MXT_INFO_CHECKSUM_SIZE;
+	config_mem_size = data->mem_size - cfg_start_ofs;
+	config_mem = kzalloc(config_mem_size, GFP_KERNEL);
+	if (!config_mem) {
+		dev_err(dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	ret = mxt_prepare_cfg_mem(data, cfg, data_pos, cfg_start_ofs,
+				  config_mem, config_mem_size);
+	if (ret)
+		goto release_mem;
+
+	/* Calculate crc of the received configs (not the raw config file) */
+	if (data->T7_address < cfg_start_ofs) {
+		dev_err(dev, "Bad T7 address, T7addr = %x, config offset %x\n",
+			data->T7_address, cfg_start_ofs);
+		ret = 0;
+		goto release_mem;
+	}
+
+	calculated_crc = mxt_calculate_crc(config_mem,
+					   data->T7_address - cfg_start_ofs,
+					   config_mem_size);
+
+	if (config_crc > 0 && config_crc != calculated_crc)
+		dev_warn(dev, "Config CRC error, calculated=%06X, file=%06X\n",
+			 calculated_crc, config_crc);
+
+	ret = mxt_upload_cfg_mem(data, cfg_start_ofs,
+				 config_mem, config_mem_size);
+	if (ret)
+		goto release_mem;
+
+	mxt_update_crc(data, MXT_COMMAND_BACKUPNV, MXT_BACKUP_VALUE);
+
+	ret = mxt_soft_reset(data);
+	if (ret)
+		goto release_mem;
+
+	dev_info(dev, "Config successfully updated\n");
+
+	/* T7 config may have changed */
+	mxt_init_t7_power_cfg(data);
+
+release_mem:
+	kfree(config_mem);
+	return ret;
+}
+
+static int mxt_acquire_irq(struct mxt_data *data)
+{
+	int error;
+
+	enable_irq(data->irq);
+
+	error = mxt_process_messages_until_invalid(data);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static int mxt_get_info(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	struct mxt_info *info = &data->info;
+	int error;
+
+	/* Read 7-byte info block starting at address 0 */
+	error = __mxt_read_reg(client, 0, sizeof(*info), info);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static void mxt_free_input_device(struct mxt_data *data)
+{
+	if (data->input_dev) {
+		input_unregister_device(data->input_dev);
+		data->input_dev = NULL;
+	}
+}
+
+static void mxt_free_object_table(struct mxt_data *data)
+{
+	kfree(data->object_table);
+	data->object_table = NULL;
+	kfree(data->msg_buf);
+	data->msg_buf = NULL;
+	data->T5_address = 0;
+	data->T5_msg_size = 0;
+	data->T6_reportid = 0;
+	data->T7_address = 0;
+	data->T9_reportid_min = 0;
+	data->T9_reportid_max = 0;
+	data->T19_reportid = 0;
+	data->T44_address = 0;
+	data->T100_reportid_min = 0;
+	data->T100_reportid_max = 0;
+	data->max_reportid = 0;
+}
+
+static int mxt_get_object_table(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	size_t table_size;
+	struct mxt_object *object_table;
+	int error;
+	int i;
+	u8 reportid;
+	u16 end_address;
+
+	table_size = data->info.object_num * sizeof(struct mxt_object);
+	object_table = kzalloc(table_size, GFP_KERNEL);
+	if (!object_table) {
+		dev_err(&data->client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	error = __mxt_read_reg(client, MXT_OBJECT_START, table_size,
+			object_table);
+	if (error) {
+		kfree(object_table);
+		return error;
+	}
+
+	/* Valid Report IDs start counting from 1 */
+	reportid = 1;
+	data->mem_size = 0;
+	for (i = 0; i < data->info.object_num; i++) {
+		struct mxt_object *object = object_table + i;
+		u8 min_id, max_id;
+
+		le16_to_cpus(&object->start_address);
+
+		if (object->num_report_ids) {
+			min_id = reportid;
+			reportid += object->num_report_ids *
+					mxt_obj_instances(object);
+			max_id = reportid - 1;
+		} else {
+			min_id = 0;
+			max_id = 0;
+		}
+
+		dev_dbg(&data->client->dev,
+			"T%u Start:%u Size:%zu Instances:%zu Report IDs:%u-%u\n",
+			object->type, object->start_address,
+			mxt_obj_size(object), mxt_obj_instances(object),
+			min_id, max_id);
+
+		switch (object->type) {
+		case MXT_GEN_MESSAGE_T5:
+			if (data->info.family_id == 0x80 &&
+			    data->info.version < 0x20) {
+				/*
+				 * On mXT224 firmware versions prior to V2.0
+				 * read and discard unused CRC byte otherwise
+				 * DMA reads are misaligned.
+				 */
+				data->T5_msg_size = mxt_obj_size(object);
+			} else {
+				/* CRC not enabled, so skip last byte */
+				data->T5_msg_size = mxt_obj_size(object) - 1;
+			}
+			data->T5_address = object->start_address;
+			break;
+		case MXT_GEN_COMMAND_T6:
+			data->T6_reportid = min_id;
+			data->T6_address = object->start_address;
+			break;
+		case MXT_GEN_POWER_T7:
+			data->T7_address = object->start_address;
+			break;
+		case MXT_TOUCH_MULTI_T9:
+			data->multitouch = MXT_TOUCH_MULTI_T9;
+			data->T9_reportid_min = min_id;
+			data->T9_reportid_max = max_id;
+			data->num_touchids = object->num_report_ids
+						* mxt_obj_instances(object);
+			break;
+		case MXT_SPT_MESSAGECOUNT_T44:
+			data->T44_address = object->start_address;
+			break;
+		case MXT_SPT_GPIOPWM_T19:
+			data->T19_reportid = min_id;
+			break;
+		case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+			data->multitouch = MXT_TOUCH_MULTITOUCHSCREEN_T100;
+			data->T100_reportid_min = min_id;
+			data->T100_reportid_max = max_id;
+			/* first two report IDs reserved */
+			data->num_touchids = object->num_report_ids - 2;
+			break;
+		}
+
+		end_address = object->start_address
+			+ mxt_obj_size(object) * mxt_obj_instances(object) - 1;
+
+		if (end_address >= data->mem_size)
+			data->mem_size = end_address + 1;
+	}
+
+	/* Store maximum reportid */
+	data->max_reportid = reportid;
+
+	/* If T44 exists, T5 position has to be directly after */
+	if (data->T44_address && (data->T5_address != data->T44_address + 1)) {
+		dev_err(&client->dev, "Invalid T44 position\n");
+		error = -EINVAL;
+		goto free_object_table;
+	}
+
+	data->msg_buf = kcalloc(data->max_reportid,
+				data->T5_msg_size, GFP_KERNEL);
+	if (!data->msg_buf) {
+		dev_err(&client->dev, "Failed to allocate message buffer\n");
+		error = -ENOMEM;
+		goto free_object_table;
+	}
+
+	data->object_table = object_table;
+
+	return 0;
+
+free_object_table:
+	mxt_free_object_table(data);
+	return error;
+}
+
+static int mxt_read_t9_resolution(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	struct t9_range range;
+	unsigned char orient;
+	struct mxt_object *object;
+
+	object = mxt_get_object(data, MXT_TOUCH_MULTI_T9);
+	if (!object)
+		return -EINVAL;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T9_RANGE,
+			       sizeof(range), &range);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range.x);
+	le16_to_cpus(&range.y);
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T9_ORIENT,
+				1, &orient);
+	if (error)
+		return error;
+
+	/* Handle default values */
+	if (range.x == 0)
+		range.x = 1023;
+
+	if (range.y == 0)
+		range.y = 1023;
+
+	if (orient & MXT_T9_ORIENT_SWITCH) {
+		data->max_x = range.y;
+		data->max_y = range.x;
+	} else {
+		data->max_x = range.x;
+		data->max_y = range.y;
+	}
+
+	dev_dbg(&client->dev,
+		"Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+	return 0;
+}
+
+static int mxt_read_t100_config(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+	struct mxt_object *object;
+	u16 range_x, range_y;
+	u8 cfg, tchaux;
+	u8 aux;
+
+	object = mxt_get_object(data, MXT_TOUCH_MULTITOUCHSCREEN_T100);
+	if (!object)
+		return -EINVAL;
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_XRANGE,
+			       sizeof(range_x), &range_x);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range_x);
+
+	error = __mxt_read_reg(client,
+			       object->start_address + MXT_T100_YRANGE,
+			       sizeof(range_y), &range_y);
+	if (error)
+		return error;
+
+	le16_to_cpus(&range_y);
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T100_CFG1,
+				1, &cfg);
+	if (error)
+		return error;
+
+	error =  __mxt_read_reg(client,
+				object->start_address + MXT_T100_TCHAUX,
+				1, &tchaux);
+	if (error)
+		return error;
+
+	/* Handle default values */
+	if (range_x == 0)
+		range_x = 1023;
+
+	if (range_y == 0)
+		range_y = 1023;
+
+	if (cfg & MXT_T100_CFG_SWITCHXY) {
+		data->max_x = range_y;
+		data->max_y = range_x;
+	} else {
+		data->max_x = range_x;
+		data->max_y = range_y;
+	}
+
+	/* allocate aux bytes */
+	aux = 6;
+
+	if (tchaux & MXT_T100_TCHAUX_VECT)
+		data->t100_aux_vect = aux++;
+
+	if (tchaux & MXT_T100_TCHAUX_AMPL)
+		data->t100_aux_ampl = aux++;
+
+	if (tchaux & MXT_T100_TCHAUX_AREA)
+		data->t100_aux_area = aux++;
+
+	dev_dbg(&client->dev,
+		"T100 aux mappings vect:%u ampl:%u area:%u\n",
+		data->t100_aux_vect, data->t100_aux_ampl, data->t100_aux_area);
+
+	dev_info(&client->dev,
+		 "T100 Touchscreen size X%uY%u\n", data->max_x, data->max_y);
+
+	return 0;
+}
+
+static int mxt_input_open(struct input_dev *dev);
+static void mxt_input_close(struct input_dev *dev);
+
+static void mxt_set_up_as_touchpad(struct input_dev *input_dev,
+				   struct mxt_data *data)
+{
+	const struct mxt_platform_data *pdata = data->pdata;
+	int i;
+
+	input_dev->name = "Atmel maXTouch Touchpad";
+
+	__set_bit(INPUT_PROP_BUTTONPAD, input_dev->propbit);
+
+	input_abs_set_res(input_dev, ABS_X, MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_Y, MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_MT_POSITION_X,
+			  MXT_PIXELS_PER_MM);
+	input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
+			  MXT_PIXELS_PER_MM);
+
+	for (i = 0; i < pdata->t19_num_keys; i++)
+		if (pdata->t19_keymap[i] != KEY_RESERVED)
+			input_set_capability(input_dev, EV_KEY,
+					     pdata->t19_keymap[i]);
+}
+
+static int mxt_initialize_input_device(struct mxt_data *data)
+{
+	const struct mxt_platform_data *pdata = data->pdata;
+	struct device *dev = &data->client->dev;
+	struct input_dev *input_dev;
+	int error;
+	unsigned int num_mt_slots;
+	unsigned int mt_flags = 0;
+
+	switch (data->multitouch) {
+	case MXT_TOUCH_MULTI_T9:
+		num_mt_slots = data->T9_reportid_max - data->T9_reportid_min + 1;
+		error = mxt_read_t9_resolution(data);
+		if (error)
+			dev_warn(dev, "Failed to initialize T9 resolution\n");
+		break;
+
+	case MXT_TOUCH_MULTITOUCHSCREEN_T100:
+		num_mt_slots = data->num_touchids;
+		error = mxt_read_t100_config(data);
+		if (error)
+			dev_warn(dev, "Failed to read T100 config\n");
+		break;
+
+	default:
+		dev_err(dev, "Invalid multitouch object\n");
+		return -EINVAL;
+	}
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "Atmel maXTouch Touchscreen";
+	input_dev->phys = data->phys;
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = dev;
+	input_dev->open = mxt_input_open;
+	input_dev->close = mxt_input_close;
+
+	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+
+	/* For single touch */
+	input_set_abs_params(input_dev, ABS_X, 0, data->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, data->max_y, 0, 0);
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_ampl)) {
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 255, 0, 0);
+	}
+
+	/* If device has buttons we assume it is a touchpad */
+	if (pdata->t19_num_keys) {
+		mxt_set_up_as_touchpad(input_dev, data);
+		mt_flags |= INPUT_MT_POINTER;
+	} else {
+		mt_flags |= INPUT_MT_DIRECT;
+	}
+
+	/* For multi touch */
+	error = input_mt_init_slots(input_dev, num_mt_slots, mt_flags);
+	if (error) {
+		dev_err(dev, "Error %d initialising slots\n", error);
+		goto err_free_mem;
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100) {
+		input_set_abs_params(input_dev, ABS_MT_TOOL_TYPE,
+				     0, MT_TOOL_MAX, 0, 0);
+		input_set_abs_params(input_dev, ABS_MT_DISTANCE,
+				     MXT_DISTANCE_ACTIVE_TOUCH,
+				     MXT_DISTANCE_HOVERING,
+				     0, 0);
+	}
+
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, data->max_x, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, data->max_y, 0, 0);
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_area)) {
+		input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+				     0, MXT_MAX_AREA, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTI_T9 ||
+	    (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	     data->t100_aux_ampl)) {
+		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect) {
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_ampl) {
+		input_set_abs_params(input_dev, ABS_MT_PRESSURE,
+				     0, 255, 0, 0);
+	}
+
+	if (data->multitouch == MXT_TOUCH_MULTITOUCHSCREEN_T100 &&
+	    data->t100_aux_vect) {
+		input_set_abs_params(input_dev, ABS_MT_ORIENTATION,
+				     0, 255, 0, 0);
+	}
+
+	input_set_drvdata(input_dev, data);
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(dev, "Error %d registering input device\n", error);
+		goto err_free_mem;
+	}
+
+	data->input_dev = input_dev;
+
+	return 0;
+
+err_free_mem:
+	input_free_device(input_dev);
+	return error;
+}
+
+static int mxt_configure_objects(struct mxt_data *data,
+				 const struct firmware *cfg);
+
+static void mxt_config_cb(const struct firmware *cfg, void *ctx)
+{
+	mxt_configure_objects(ctx, cfg);
+	release_firmware(cfg);
+}
+
+static int mxt_initialize(struct mxt_data *data)
+{
+	struct i2c_client *client = data->client;
+	int recovery_attempts = 0;
+	int error;
+
+	while (1) {
+		error = mxt_get_info(data);
+		if (!error)
+			break;
+
+		/* Check bootloader state */
+		error = mxt_probe_bootloader(data, false);
+		if (error) {
+			dev_info(&client->dev, "Trying alternate bootloader address\n");
+			error = mxt_probe_bootloader(data, true);
+			if (error) {
+				/* Chip is not in appmode or bootloader mode */
+				return error;
+			}
+		}
+
+		/* OK, we are in bootloader, see if we can recover */
+		if (++recovery_attempts > 1) {
+			dev_err(&client->dev, "Could not recover from bootloader mode\n");
+			/*
+			 * We can reflash from this state, so do not
+			 * abort initialization.
+			 */
+			data->in_bootloader = true;
+			return 0;
+		}
+
+		/* Attempt to exit bootloader into app mode */
+		mxt_send_bootloader_cmd(data, false);
+		msleep(MXT_FW_RESET_TIME);
+	}
+
+	/* Get object table information */
+	error = mxt_get_object_table(data);
+	if (error) {
+		dev_err(&client->dev, "Error %d reading object table\n", error);
+		return error;
+	}
+
+	error = mxt_acquire_irq(data);
+	if (error)
+		goto err_free_object_table;
+
+	error = request_firmware_nowait(THIS_MODULE, true, MXT_CFG_NAME,
+					&client->dev, GFP_KERNEL, data,
+					mxt_config_cb);
+	if (error) {
+		dev_err(&client->dev, "Failed to invoke firmware loader: %d\n",
+			error);
+		goto err_free_object_table;
+	}
+
+	return 0;
+
+err_free_object_table:
+	mxt_free_object_table(data);
+	return error;
+}
+
+static int mxt_set_t7_power_cfg(struct mxt_data *data, u8 sleep)
+{
+	struct device *dev = &data->client->dev;
+	int error;
+	struct t7_config *new_config;
+	struct t7_config deepsleep = { .active = 0, .idle = 0 };
+
+	if (sleep == MXT_POWER_CFG_DEEPSLEEP)
+		new_config = &deepsleep;
+	else
+		new_config = &data->t7_cfg;
+
+	error = __mxt_write_reg(data->client, data->T7_address,
+				sizeof(data->t7_cfg), new_config);
+	if (error)
+		return error;
+
+	dev_dbg(dev, "Set T7 ACTV:%d IDLE:%d\n",
+		new_config->active, new_config->idle);
+
+	return 0;
+}
+
+static int mxt_init_t7_power_cfg(struct mxt_data *data)
+{
+	struct device *dev = &data->client->dev;
+	int error;
+	bool retry = false;
+
+recheck:
+	error = __mxt_read_reg(data->client, data->T7_address,
+				sizeof(data->t7_cfg), &data->t7_cfg);
+	if (error)
+		return error;
+
+	if (data->t7_cfg.active == 0 || data->t7_cfg.idle == 0) {
+		if (!retry) {
+			dev_dbg(dev, "T7 cfg zero, resetting\n");
+			mxt_soft_reset(data);
+			retry = true;
+			goto recheck;
+		} else {
+			dev_dbg(dev, "T7 cfg zero after reset, overriding\n");
+			data->t7_cfg.active = 20;
+			data->t7_cfg.idle = 100;
+			return mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+		}
+	}
+
+	dev_dbg(dev, "Initialized power cfg: ACTV %d, IDLE %d\n",
+		data->t7_cfg.active, data->t7_cfg.idle);
+	return 0;
+}
+
+static int mxt_configure_objects(struct mxt_data *data,
+				 const struct firmware *cfg)
+{
+	struct device *dev = &data->client->dev;
+	struct mxt_info *info = &data->info;
+	int error;
+
+	error = mxt_init_t7_power_cfg(data);
+	if (error) {
+		dev_err(dev, "Failed to initialize power cfg\n");
+		return error;
+	}
+
+	if (cfg) {
+		error = mxt_update_cfg(data, cfg);
+		if (error)
+			dev_warn(dev, "Error %d updating config\n", error);
+	}
+
+	if (data->multitouch) {
+		error = mxt_initialize_input_device(data);
+		if (error)
+			return error;
+	} else {
+		dev_warn(dev, "No touch object detected\n");
+	}
+
+	dev_info(dev,
+		 "Family: %u Variant: %u Firmware V%u.%u.%02X Objects: %u\n",
+		 info->family_id, info->variant_id, info->version >> 4,
+		 info->version & 0xf, info->build, info->object_num);
+
+	return 0;
+}
+
+/* Firmware Version is returned as Major.Minor.Build */
+static ssize_t mxt_fw_version_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_info *info = &data->info;
+	return scnprintf(buf, PAGE_SIZE, "%u.%u.%02X\n",
+			 info->version >> 4, info->version & 0xf, info->build);
+}
+
+/* Hardware Version is returned as FamilyID.VariantID */
+static ssize_t mxt_hw_version_show(struct device *dev,
+				   struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_info *info = &data->info;
+	return scnprintf(buf, PAGE_SIZE, "%u.%u\n",
+			 info->family_id, info->variant_id);
+}
+
+static ssize_t mxt_show_instance(char *buf, int count,
+				 struct mxt_object *object, int instance,
+				 const u8 *val)
+{
+	int i;
+
+	if (mxt_obj_instances(object) > 1)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				   "Instance %u\n", instance);
+
+	for (i = 0; i < mxt_obj_size(object); i++)
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				"\t[%2u]: %02x (%d)\n", i, val[i], val[i]);
+	count += scnprintf(buf + count, PAGE_SIZE - count, "\n");
+
+	return count;
+}
+
+static ssize_t mxt_object_show(struct device *dev,
+				    struct device_attribute *attr, char *buf)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	struct mxt_object *object;
+	int count = 0;
+	int i, j;
+	int error;
+	u8 *obuf;
+
+	/* Pre-allocate buffer large enough to hold max sized object. */
+	obuf = kmalloc(256, GFP_KERNEL);
+	if (!obuf)
+		return -ENOMEM;
+
+	error = 0;
+	for (i = 0; i < data->info.object_num; i++) {
+		object = data->object_table + i;
+
+		if (!mxt_object_readable(object->type))
+			continue;
+
+		count += scnprintf(buf + count, PAGE_SIZE - count,
+				"T%u:\n", object->type);
+
+		for (j = 0; j < mxt_obj_instances(object); j++) {
+			u16 size = mxt_obj_size(object);
+			u16 addr = object->start_address + j * size;
+
+			error = __mxt_read_reg(data->client, addr, size, obuf);
+			if (error)
+				goto done;
+
+			count = mxt_show_instance(buf, count, object, j, obuf);
+		}
+	}
+
+done:
+	kfree(obuf);
+	return error ?: count;
+}
+
+static int mxt_check_firmware_format(struct device *dev,
+				     const struct firmware *fw)
+{
+	unsigned int pos = 0;
+	char c;
+
+	while (pos < fw->size) {
+		c = *(fw->data + pos);
+
+		if (c < '0' || (c > '9' && c < 'A') || c > 'F')
+			return 0;
+
+		pos++;
+	}
+
+	/*
+	 * To convert file try:
+	 * xxd -r -p mXTXXX__APP_VX-X-XX.enc > maxtouch.fw
+	 */
+	dev_err(dev, "Aborting: firmware file must be in binary format\n");
+
+	return -EINVAL;
+}
+
+static int mxt_load_fw(struct device *dev, const char *fn)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	const struct firmware *fw = NULL;
+	unsigned int frame_size;
+	unsigned int pos = 0;
+	unsigned int retry = 0;
+	unsigned int frame = 0;
+	int ret;
+
+	ret = request_firmware(&fw, fn, dev);
+	if (ret) {
+		dev_err(dev, "Unable to open firmware %s\n", fn);
+		return ret;
+	}
+
+	/* Check for incorrect enc file */
+	ret = mxt_check_firmware_format(dev, fw);
+	if (ret)
+		goto release_firmware;
+
+	if (!data->in_bootloader) {
+		/* Change to the bootloader mode */
+		data->in_bootloader = true;
+
+		ret = mxt_t6_command(data, MXT_COMMAND_RESET,
+				     MXT_BOOT_VALUE, false);
+		if (ret)
+			goto release_firmware;
+
+		msleep(MXT_RESET_TIME);
+
+		/* Do not need to scan since we know family ID */
+		ret = mxt_lookup_bootloader_address(data, 0);
+		if (ret)
+			goto release_firmware;
+
+		mxt_free_input_device(data);
+		mxt_free_object_table(data);
+	} else {
+		enable_irq(data->irq);
+	}
+
+	reinit_completion(&data->bl_completion);
+
+	ret = mxt_check_bootloader(data, MXT_WAITING_BOOTLOAD_CMD, false);
+	if (ret) {
+		/* Bootloader may still be unlocked from previous attempt */
+		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, false);
+		if (ret)
+			goto disable_irq;
+	} else {
+		dev_info(dev, "Unlocking bootloader\n");
+
+		/* Unlock bootloader */
+		ret = mxt_send_bootloader_cmd(data, true);
+		if (ret)
+			goto disable_irq;
+	}
+
+	while (pos < fw->size) {
+		ret = mxt_check_bootloader(data, MXT_WAITING_FRAME_DATA, true);
+		if (ret)
+			goto disable_irq;
+
+		frame_size = ((*(fw->data + pos) << 8) | *(fw->data + pos + 1));
+
+		/* Take account of CRC bytes */
+		frame_size += 2;
+
+		/* Write one frame to device */
+		ret = mxt_bootloader_write(data, fw->data + pos, frame_size);
+		if (ret)
+			goto disable_irq;
+
+		ret = mxt_check_bootloader(data, MXT_FRAME_CRC_PASS, true);
+		if (ret) {
+			retry++;
+
+			/* Back off by 20ms per retry */
+			msleep(retry * 20);
+
+			if (retry > 20) {
+				dev_err(dev, "Retry count exceeded\n");
+				goto disable_irq;
+			}
+		} else {
+			retry = 0;
+			pos += frame_size;
+			frame++;
+		}
+
+		if (frame % 50 == 0)
+			dev_dbg(dev, "Sent %d frames, %d/%zd bytes\n",
+				frame, pos, fw->size);
+	}
+
+	/* Wait for flash. */
+	ret = mxt_wait_for_completion(data, &data->bl_completion,
+				      MXT_FW_RESET_TIME);
+	if (ret)
+		goto disable_irq;
+
+	dev_dbg(dev, "Sent %d frames, %d bytes\n", frame, pos);
+
+	/*
+	 * Wait for device to reset. Some bootloader versions do not assert
+	 * the CHG line after bootloading has finished, so ignore potential
+	 * errors.
+	 */
+	mxt_wait_for_completion(data, &data->bl_completion, MXT_FW_RESET_TIME);
+
+	data->in_bootloader = false;
+
+disable_irq:
+	disable_irq(data->irq);
+release_firmware:
+	release_firmware(fw);
+	return ret;
+}
+
+static ssize_t mxt_update_fw_store(struct device *dev,
+					struct device_attribute *attr,
+					const char *buf, size_t count)
+{
+	struct mxt_data *data = dev_get_drvdata(dev);
+	int error;
+
+	error = mxt_load_fw(dev, MXT_FW_NAME);
+	if (error) {
+		dev_err(dev, "The firmware update failed(%d)\n", error);
+		count = error;
+	} else {
+		dev_info(dev, "The firmware update succeeded\n");
+
+		error = mxt_initialize(data);
+		if (error)
+			return error;
+	}
+
+	return count;
+}
+
+static DEVICE_ATTR(fw_version, S_IRUGO, mxt_fw_version_show, NULL);
+static DEVICE_ATTR(hw_version, S_IRUGO, mxt_hw_version_show, NULL);
+static DEVICE_ATTR(object, S_IRUGO, mxt_object_show, NULL);
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, mxt_update_fw_store);
+
+static struct attribute *mxt_attrs[] = {
+	&dev_attr_fw_version.attr,
+	&dev_attr_hw_version.attr,
+	&dev_attr_object.attr,
+	&dev_attr_update_fw.attr,
+	NULL
+};
+
+static const struct attribute_group mxt_attr_group = {
+	.attrs = mxt_attrs,
+};
+
+static void mxt_start(struct mxt_data *data)
+{
+	switch (data->pdata->suspend_mode) {
+	case MXT_SUSPEND_T9_CTRL:
+		mxt_soft_reset(data);
+
+		/* Touch enable */
+		/* 0x83 = SCANEN | RPTEN | ENABLE */
+		mxt_write_object(data,
+				MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83);
+		break;
+
+	case MXT_SUSPEND_DEEP_SLEEP:
+	default:
+		mxt_set_t7_power_cfg(data, MXT_POWER_CFG_RUN);
+
+		/* Recalibrate since chip has been in deep sleep */
+		mxt_t6_command(data, MXT_COMMAND_CALIBRATE, 1, false);
+		break;
+	}
+
+}
+
+static void mxt_stop(struct mxt_data *data)
+{
+	switch (data->pdata->suspend_mode) {
+	case MXT_SUSPEND_T9_CTRL:
+		/* Touch disable */
+		mxt_write_object(data,
+				MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0);
+		break;
+
+	case MXT_SUSPEND_DEEP_SLEEP:
+	default:
+		mxt_set_t7_power_cfg(data, MXT_POWER_CFG_DEEPSLEEP);
+		break;
+	}
+}
+
+static int mxt_input_open(struct input_dev *dev)
+{
+	struct mxt_data *data = input_get_drvdata(dev);
+
+	mxt_start(data);
+
+	return 0;
+}
+
+static void mxt_input_close(struct input_dev *dev)
+{
+	struct mxt_data *data = input_get_drvdata(dev);
+
+	mxt_stop(data);
+}
+
+#ifdef CONFIG_OF
+static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
+{
+	struct mxt_platform_data *pdata;
+	struct device_node *np = client->dev.of_node;
+	u32 *keymap;
+	int proplen, ret;
+
+	if (!np)
+		return ERR_PTR(-ENOENT);
+
+	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	if (of_find_property(np, "linux,gpio-keymap", &proplen)) {
+		pdata->t19_num_keys = proplen / sizeof(u32);
+
+		keymap = devm_kzalloc(&client->dev,
+				pdata->t19_num_keys * sizeof(keymap[0]),
+				GFP_KERNEL);
+		if (!keymap)
+			return ERR_PTR(-ENOMEM);
+
+		ret = of_property_read_u32_array(np, "linux,gpio-keymap",
+						 keymap, pdata->t19_num_keys);
+		if (ret)
+			dev_warn(&client->dev,
+				 "Couldn't read linux,gpio-keymap: %d\n", ret);
+
+		pdata->t19_keymap = keymap;
+	}
+
+	pdata->suspend_mode = MXT_SUSPEND_DEEP_SLEEP;
+
+	return pdata;
+}
+#else
+static const struct mxt_platform_data *mxt_parse_dt(struct i2c_client *client)
+{
+	return ERR_PTR(-ENOENT);
+}
+#endif
+
+#ifdef CONFIG_ACPI
+
+struct mxt_acpi_platform_data {
+	const char *hid;
+	struct mxt_platform_data pdata;
+};
+
+static unsigned int samus_touchpad_buttons[] = {
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	BTN_LEFT
+};
+
+static struct mxt_acpi_platform_data samus_platform_data[] = {
+	{
+		/* Touchpad */
+		.hid	= "ATML0000",
+		.pdata	= {
+			.t19_num_keys	= ARRAY_SIZE(samus_touchpad_buttons),
+			.t19_keymap	= samus_touchpad_buttons,
+		},
+	},
+	{
+		/* Touchscreen */
+		.hid	= "ATML0001",
+	},
+	{ }
+};
+
+static unsigned int chromebook_tp_buttons[] = {
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	KEY_RESERVED,
+	BTN_LEFT
+};
+
+static struct mxt_acpi_platform_data chromebook_platform_data[] = {
+	{
+		/* Touchpad */
+		.hid	= "ATML0000",
+		.pdata	= {
+			.t19_num_keys	= ARRAY_SIZE(chromebook_tp_buttons),
+			.t19_keymap	= chromebook_tp_buttons,
+		},
+	},
+	{
+		/* Touchscreen */
+		.hid	= "ATML0001",
+	},
+	{ }
+};
+
+static const struct dmi_system_id mxt_dmi_table[] = {
+	{
+		/* 2015 Google Pixel */
+		.ident = "Chromebook Pixel 2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Samus"),
+		},
+		.driver_data = samus_platform_data,
+	},
+	{
+		/* Other Google Chromebooks */
+		.ident = "Chromebook",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "GOOGLE"),
+		},
+		.driver_data = chromebook_platform_data,
+	},
+	{ }
+};
+
+static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
+{
+	struct acpi_device *adev;
+	const struct dmi_system_id *system_id;
+	const struct mxt_acpi_platform_data *acpi_pdata;
+
+	/*
+	 * Ignore ACPI devices representing bootloader mode.
+	 *
+	 * This is a bit of a hack: Google Chromebook BIOS creates ACPI
+	 * devices for both application and bootloader modes, but we are
+	 * interested in application mode only (if device is in bootloader
+	 * mode we'll end up switching into application anyway). So far
+	 * application mode addresses were all above 0x40, so we'll use it
+	 * as a threshold.
+	 */
+	if (client->addr < 0x40)
+		return ERR_PTR(-ENXIO);
+
+	adev = ACPI_COMPANION(&client->dev);
+	if (!adev)
+		return ERR_PTR(-ENOENT);
+
+	system_id = dmi_first_match(mxt_dmi_table);
+	if (!system_id)
+		return ERR_PTR(-ENOENT);
+
+	acpi_pdata = system_id->driver_data;
+	if (!acpi_pdata)
+		return ERR_PTR(-ENOENT);
+
+	while (acpi_pdata->hid) {
+		if (!strcmp(acpi_device_hid(adev), acpi_pdata->hid))
+			return &acpi_pdata->pdata;
+
+		acpi_pdata++;
+	}
+
+	return ERR_PTR(-ENOENT);
+}
+#else
+static const struct mxt_platform_data *mxt_parse_acpi(struct i2c_client *client)
+{
+	return ERR_PTR(-ENOENT);
+}
+#endif
+
+static const struct mxt_platform_data *
+mxt_get_platform_data(struct i2c_client *client)
+{
+	const struct mxt_platform_data *pdata;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (pdata)
+		return pdata;
+
+	pdata = mxt_parse_dt(client);
+	if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
+		return pdata;
+
+	pdata = mxt_parse_acpi(client);
+	if (!IS_ERR(pdata) || PTR_ERR(pdata) != -ENOENT)
+		return pdata;
+
+	dev_err(&client->dev, "No platform data specified\n");
+	return ERR_PTR(-EINVAL);
+}
+
+static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id)
+{
+	struct mxt_data *data;
+	const struct mxt_platform_data *pdata;
+	int error;
+
+	pdata = mxt_get_platform_data(client);
+	if (IS_ERR(pdata))
+		return PTR_ERR(pdata);
+
+	data = kzalloc(sizeof(struct mxt_data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	snprintf(data->phys, sizeof(data->phys), "i2c-%u-%04x/input0",
+		 client->adapter->nr, client->addr);
+
+	data->client = client;
+	data->pdata = pdata;
+	data->irq = client->irq;
+	i2c_set_clientdata(client, data);
+
+	init_completion(&data->bl_completion);
+	init_completion(&data->reset_completion);
+	init_completion(&data->crc_completion);
+
+	error = request_threaded_irq(client->irq, NULL, mxt_interrupt,
+				     pdata->irqflags | IRQF_ONESHOT,
+				     client->name, data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		goto err_free_mem;
+	}
+
+	disable_irq(client->irq);
+
+	error = mxt_initialize(data);
+	if (error)
+		goto err_free_irq;
+
+	error = sysfs_create_group(&client->dev.kobj, &mxt_attr_group);
+	if (error) {
+		dev_err(&client->dev, "Failure %d creating sysfs group\n",
+			error);
+		goto err_free_object;
+	}
+
+	return 0;
+
+err_free_object:
+	mxt_free_input_device(data);
+	mxt_free_object_table(data);
+err_free_irq:
+	free_irq(client->irq, data);
+err_free_mem:
+	kfree(data);
+	return error;
+}
+
+static int mxt_remove(struct i2c_client *client)
+{
+	struct mxt_data *data = i2c_get_clientdata(client);
+
+	sysfs_remove_group(&client->dev.kobj, &mxt_attr_group);
+	free_irq(data->irq, data);
+	mxt_free_input_device(data);
+	mxt_free_object_table(data);
+	kfree(data);
+
+	return 0;
+}
+
+static int __maybe_unused mxt_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mxt_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+
+	if (!input_dev)
+		return 0;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		mxt_stop(data);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused mxt_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mxt_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+
+	if (!input_dev)
+		return 0;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		mxt_start(data);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mxt_pm_ops, mxt_suspend, mxt_resume);
+
+static const struct of_device_id mxt_of_match[] = {
+	{ .compatible = "atmel,maxtouch", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, mxt_of_match);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id mxt_acpi_id[] = {
+	{ "ATML0000", 0 },	/* Touchpad */
+	{ "ATML0001", 0 },	/* Touchscreen */
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, mxt_acpi_id);
+#endif
+
+static const struct i2c_device_id mxt_id[] = {
+	{ "qt602240_ts", 0 },
+	{ "atmel_mxt_ts", 0 },
+	{ "atmel_mxt_tp", 0 },
+	{ "maxtouch", 0 },
+	{ "mXT224", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mxt_id);
+
+static struct i2c_driver mxt_driver = {
+	.driver = {
+		.name	= "atmel_mxt_ts",
+		.of_match_table = of_match_ptr(mxt_of_match),
+		.acpi_match_table = ACPI_PTR(mxt_acpi_id),
+		.pm	= &mxt_pm_ops,
+	},
+	.probe		= mxt_probe,
+	.remove		= mxt_remove,
+	.id_table	= mxt_id,
+};
+
+module_i2c_driver(mxt_driver);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Atmel maXTouch Touchscreen driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/auo-pixcir-ts.c b/drivers/input/touchscreen/auo-pixcir-ts.c
new file mode 100644
index 0000000..6592fc5
--- /dev/null
+++ b/drivers/input/touchscreen/auo-pixcir-ts.c
@@ -0,0 +1,696 @@
+/*
+ * Driver for AUO in-cell touchscreens
+ *
+ * Copyright (c) 2011 Heiko Stuebner <heiko@sntech.de>
+ *
+ * loosely based on auo_touch.c from Dell Streak vendor-kernel
+ *
+ * Copyright (c) 2008 QUALCOMM Incorporated.
+ * Copyright (c) 2008 QUALCOMM USA, INC.
+ *
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/jiffies.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/input/auo-pixcir-ts.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+/*
+ * Coordinate calculation:
+ * X1 = X1_LSB + X1_MSB*256
+ * Y1 = Y1_LSB + Y1_MSB*256
+ * X2 = X2_LSB + X2_MSB*256
+ * Y2 = Y2_LSB + Y2_MSB*256
+ */
+#define AUO_PIXCIR_REG_X1_LSB		0x00
+#define AUO_PIXCIR_REG_X1_MSB		0x01
+#define AUO_PIXCIR_REG_Y1_LSB		0x02
+#define AUO_PIXCIR_REG_Y1_MSB		0x03
+#define AUO_PIXCIR_REG_X2_LSB		0x04
+#define AUO_PIXCIR_REG_X2_MSB		0x05
+#define AUO_PIXCIR_REG_Y2_LSB		0x06
+#define AUO_PIXCIR_REG_Y2_MSB		0x07
+
+#define AUO_PIXCIR_REG_STRENGTH		0x0d
+#define AUO_PIXCIR_REG_STRENGTH_X1_LSB	0x0e
+#define AUO_PIXCIR_REG_STRENGTH_X1_MSB	0x0f
+
+#define AUO_PIXCIR_REG_RAW_DATA_X	0x2b
+#define AUO_PIXCIR_REG_RAW_DATA_Y	0x4f
+
+#define AUO_PIXCIR_REG_X_SENSITIVITY	0x6f
+#define AUO_PIXCIR_REG_Y_SENSITIVITY	0x70
+#define AUO_PIXCIR_REG_INT_SETTING	0x71
+#define AUO_PIXCIR_REG_INT_WIDTH	0x72
+#define AUO_PIXCIR_REG_POWER_MODE	0x73
+
+#define AUO_PIXCIR_REG_VERSION		0x77
+#define AUO_PIXCIR_REG_CALIBRATE	0x78
+
+#define AUO_PIXCIR_REG_TOUCHAREA_X1	0x1e
+#define AUO_PIXCIR_REG_TOUCHAREA_Y1	0x1f
+#define AUO_PIXCIR_REG_TOUCHAREA_X2	0x20
+#define AUO_PIXCIR_REG_TOUCHAREA_Y2	0x21
+
+#define AUO_PIXCIR_REG_EEPROM_CALIB_X	0x42
+#define AUO_PIXCIR_REG_EEPROM_CALIB_Y	0xad
+
+#define AUO_PIXCIR_INT_TPNUM_MASK	0xe0
+#define AUO_PIXCIR_INT_TPNUM_SHIFT	5
+#define AUO_PIXCIR_INT_RELEASE		(1 << 4)
+#define AUO_PIXCIR_INT_ENABLE		(1 << 3)
+#define AUO_PIXCIR_INT_POL_HIGH		(1 << 2)
+#define AUO_PIXCIR_INT_MODE_MASK	0x03
+
+/*
+ * Power modes:
+ * active:	scan speed 60Hz
+ * sleep:	scan speed 10Hz can be auto-activated, wakeup on 1st touch
+ * deep sleep:	scan speed 1Hz can only be entered or left manually.
+ */
+#define AUO_PIXCIR_POWER_ACTIVE		0x00
+#define AUO_PIXCIR_POWER_SLEEP		0x01
+#define AUO_PIXCIR_POWER_DEEP_SLEEP	0x02
+#define AUO_PIXCIR_POWER_MASK		0x03
+
+#define AUO_PIXCIR_POWER_ALLOW_SLEEP	(1 << 2)
+#define AUO_PIXCIR_POWER_IDLE_TIME(ms)	((ms & 0xf) << 4)
+
+#define AUO_PIXCIR_CALIBRATE		0x03
+
+#define AUO_PIXCIR_EEPROM_CALIB_X_LEN	62
+#define AUO_PIXCIR_EEPROM_CALIB_Y_LEN	36
+
+#define AUO_PIXCIR_RAW_DATA_X_LEN	18
+#define AUO_PIXCIR_RAW_DATA_Y_LEN	11
+
+#define AUO_PIXCIR_STRENGTH_ENABLE	(1 << 0)
+
+/* Touchscreen absolute values */
+#define AUO_PIXCIR_REPORT_POINTS	2
+#define AUO_PIXCIR_MAX_AREA		0xff
+#define AUO_PIXCIR_PENUP_TIMEOUT_MS	10
+
+struct auo_pixcir_ts {
+	struct i2c_client	*client;
+	struct input_dev	*input;
+	const struct auo_pixcir_ts_platdata *pdata;
+	char			phys[32];
+
+	/* special handling for touch_indicate interupt mode */
+	bool			touch_ind_mode;
+
+	wait_queue_head_t	wait;
+	bool			stopped;
+};
+
+struct auo_point_t {
+	int	coord_x;
+	int	coord_y;
+	int	area_major;
+	int	area_minor;
+	int	orientation;
+};
+
+static int auo_pixcir_collect_data(struct auo_pixcir_ts *ts,
+				   struct auo_point_t *point)
+{
+	struct i2c_client *client = ts->client;
+	const struct auo_pixcir_ts_platdata *pdata = ts->pdata;
+	uint8_t raw_coord[8];
+	uint8_t raw_area[4];
+	int i, ret;
+
+	/* touch coordinates */
+	ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_X1_LSB,
+					    8, raw_coord);
+	if (ret < 0) {
+		dev_err(&client->dev, "failed to read coordinate, %d\n", ret);
+		return ret;
+	}
+
+	/* touch area */
+	ret = i2c_smbus_read_i2c_block_data(client, AUO_PIXCIR_REG_TOUCHAREA_X1,
+					    4, raw_area);
+	if (ret < 0) {
+		dev_err(&client->dev, "could not read touch area, %d\n", ret);
+		return ret;
+	}
+
+	for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) {
+		point[i].coord_x =
+			raw_coord[4 * i + 1] << 8 | raw_coord[4 * i];
+		point[i].coord_y =
+			raw_coord[4 * i + 3] << 8 | raw_coord[4 * i + 2];
+
+		if (point[i].coord_x > pdata->x_max ||
+		    point[i].coord_y > pdata->y_max) {
+			dev_warn(&client->dev, "coordinates (%d,%d) invalid\n",
+				point[i].coord_x, point[i].coord_y);
+			point[i].coord_x = point[i].coord_y = 0;
+		}
+
+		/* determine touch major, minor and orientation */
+		point[i].area_major = max(raw_area[2 * i], raw_area[2 * i + 1]);
+		point[i].area_minor = min(raw_area[2 * i], raw_area[2 * i + 1]);
+		point[i].orientation = raw_area[2 * i] > raw_area[2 * i + 1];
+	}
+
+	return 0;
+}
+
+static irqreturn_t auo_pixcir_interrupt(int irq, void *dev_id)
+{
+	struct auo_pixcir_ts *ts = dev_id;
+	const struct auo_pixcir_ts_platdata *pdata = ts->pdata;
+	struct auo_point_t point[AUO_PIXCIR_REPORT_POINTS];
+	int i;
+	int ret;
+	int fingers = 0;
+	int abs = -1;
+
+	while (!ts->stopped) {
+
+		/* check for up event in touch touch_ind_mode */
+		if (ts->touch_ind_mode) {
+			if (gpio_get_value(pdata->gpio_int) == 0) {
+				input_mt_sync(ts->input);
+				input_report_key(ts->input, BTN_TOUCH, 0);
+				input_sync(ts->input);
+				break;
+			}
+		}
+
+		ret = auo_pixcir_collect_data(ts, point);
+		if (ret < 0) {
+			/* we want to loop only in touch_ind_mode */
+			if (!ts->touch_ind_mode)
+				break;
+
+			wait_event_timeout(ts->wait, ts->stopped,
+				msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS));
+			continue;
+		}
+
+		for (i = 0; i < AUO_PIXCIR_REPORT_POINTS; i++) {
+			if (point[i].coord_x > 0 || point[i].coord_y > 0) {
+				input_report_abs(ts->input, ABS_MT_POSITION_X,
+						 point[i].coord_x);
+				input_report_abs(ts->input, ABS_MT_POSITION_Y,
+						 point[i].coord_y);
+				input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
+						 point[i].area_major);
+				input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
+						 point[i].area_minor);
+				input_report_abs(ts->input, ABS_MT_ORIENTATION,
+						 point[i].orientation);
+				input_mt_sync(ts->input);
+
+				/* use first finger as source for singletouch */
+				if (fingers == 0)
+					abs = i;
+
+				/* number of touch points could also be queried
+				 * via i2c but would require an additional call
+				 */
+				fingers++;
+			}
+		}
+
+		input_report_key(ts->input, BTN_TOUCH, fingers > 0);
+
+		if (abs > -1) {
+			input_report_abs(ts->input, ABS_X, point[abs].coord_x);
+			input_report_abs(ts->input, ABS_Y, point[abs].coord_y);
+		}
+
+		input_sync(ts->input);
+
+		/* we want to loop only in touch_ind_mode */
+		if (!ts->touch_ind_mode)
+			break;
+
+		wait_event_timeout(ts->wait, ts->stopped,
+				 msecs_to_jiffies(AUO_PIXCIR_PENUP_TIMEOUT_MS));
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Set the power mode of the device.
+ * Valid modes are
+ * - AUO_PIXCIR_POWER_ACTIVE
+ * - AUO_PIXCIR_POWER_SLEEP - automatically left on first touch
+ * - AUO_PIXCIR_POWER_DEEP_SLEEP
+ */
+static int auo_pixcir_power_mode(struct auo_pixcir_ts *ts, int mode)
+{
+	struct i2c_client *client = ts->client;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_POWER_MODE);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to read reg %Xh, %d\n",
+			AUO_PIXCIR_REG_POWER_MODE, ret);
+		return ret;
+	}
+
+	ret &= ~AUO_PIXCIR_POWER_MASK;
+	ret |= mode;
+
+	ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_POWER_MODE, ret);
+	if (ret) {
+		dev_err(&client->dev, "unable to write reg %Xh, %d\n",
+			AUO_PIXCIR_REG_POWER_MODE, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int auo_pixcir_int_config(struct auo_pixcir_ts *ts,
+					   int int_setting)
+{
+	struct i2c_client *client = ts->client;
+	const struct auo_pixcir_ts_platdata *pdata = ts->pdata;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to read reg %Xh, %d\n",
+			AUO_PIXCIR_REG_INT_SETTING, ret);
+		return ret;
+	}
+
+	ret &= ~AUO_PIXCIR_INT_MODE_MASK;
+	ret |= int_setting;
+	ret |= AUO_PIXCIR_INT_POL_HIGH; /* always use high for interrupts */
+
+	ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING,
+					ret);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to write reg %Xh, %d\n",
+			AUO_PIXCIR_REG_INT_SETTING, ret);
+		return ret;
+	}
+
+	ts->touch_ind_mode = pdata->int_setting == AUO_PIXCIR_INT_TOUCH_IND;
+
+	return 0;
+}
+
+/* control the generation of interrupts on the device side */
+static int auo_pixcir_int_toggle(struct auo_pixcir_ts *ts, bool enable)
+{
+	struct i2c_client *client = ts->client;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_INT_SETTING);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to read reg %Xh, %d\n",
+			AUO_PIXCIR_REG_INT_SETTING, ret);
+		return ret;
+	}
+
+	if (enable)
+		ret |= AUO_PIXCIR_INT_ENABLE;
+	else
+		ret &= ~AUO_PIXCIR_INT_ENABLE;
+
+	ret = i2c_smbus_write_byte_data(client, AUO_PIXCIR_REG_INT_SETTING,
+					ret);
+	if (ret < 0) {
+		dev_err(&client->dev, "unable to write reg %Xh, %d\n",
+			AUO_PIXCIR_REG_INT_SETTING, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int auo_pixcir_start(struct auo_pixcir_ts *ts)
+{
+	struct i2c_client *client = ts->client;
+	int ret;
+
+	ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_ACTIVE);
+	if (ret < 0) {
+		dev_err(&client->dev, "could not set power mode, %d\n",
+			ret);
+		return ret;
+	}
+
+	ts->stopped = false;
+	mb();
+	enable_irq(client->irq);
+
+	ret = auo_pixcir_int_toggle(ts, 1);
+	if (ret < 0) {
+		dev_err(&client->dev, "could not enable interrupt, %d\n",
+			ret);
+		disable_irq(client->irq);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int auo_pixcir_stop(struct auo_pixcir_ts *ts)
+{
+	struct i2c_client *client = ts->client;
+	int ret;
+
+	ret = auo_pixcir_int_toggle(ts, 0);
+	if (ret < 0) {
+		dev_err(&client->dev, "could not disable interrupt, %d\n",
+			ret);
+		return ret;
+	}
+
+	/* disable receiving of interrupts */
+	disable_irq(client->irq);
+	ts->stopped = true;
+	mb();
+	wake_up(&ts->wait);
+
+	return auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_DEEP_SLEEP);
+}
+
+static int auo_pixcir_input_open(struct input_dev *dev)
+{
+	struct auo_pixcir_ts *ts = input_get_drvdata(dev);
+
+	return auo_pixcir_start(ts);
+}
+
+static void auo_pixcir_input_close(struct input_dev *dev)
+{
+	struct auo_pixcir_ts *ts = input_get_drvdata(dev);
+
+	auo_pixcir_stop(ts);
+
+	return;
+}
+
+static int __maybe_unused auo_pixcir_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
+
+	/* when configured as wakeup source, device should always wake system
+	 * therefore start device if necessary
+	 */
+	if (device_may_wakeup(&client->dev)) {
+		/* need to start device if not open, to be wakeup source */
+		if (!input->users) {
+			ret = auo_pixcir_start(ts);
+			if (ret)
+				goto unlock;
+		}
+
+		enable_irq_wake(client->irq);
+		ret = auo_pixcir_power_mode(ts, AUO_PIXCIR_POWER_SLEEP);
+	} else if (input->users) {
+		ret = auo_pixcir_stop(ts);
+	}
+
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
+}
+
+static int __maybe_unused auo_pixcir_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct auo_pixcir_ts *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(&client->dev)) {
+		disable_irq_wake(client->irq);
+
+		/* need to stop device if it was not open on suspend */
+		if (!input->users) {
+			ret = auo_pixcir_stop(ts);
+			if (ret)
+				goto unlock;
+		}
+
+		/* device wakes automatically from SLEEP */
+	} else if (input->users) {
+		ret = auo_pixcir_start(ts);
+	}
+
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(auo_pixcir_pm_ops,
+			 auo_pixcir_suspend, auo_pixcir_resume);
+
+#ifdef CONFIG_OF
+static struct auo_pixcir_ts_platdata *auo_pixcir_parse_dt(struct device *dev)
+{
+	struct auo_pixcir_ts_platdata *pdata;
+	struct device_node *np = dev->of_node;
+
+	if (!np)
+		return ERR_PTR(-ENOENT);
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "failed to allocate platform data\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	pdata->gpio_int = of_get_gpio(np, 0);
+	if (!gpio_is_valid(pdata->gpio_int)) {
+		dev_err(dev, "failed to get interrupt gpio\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata->gpio_rst = of_get_gpio(np, 1);
+	if (!gpio_is_valid(pdata->gpio_rst)) {
+		dev_err(dev, "failed to get reset gpio\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (of_property_read_u32(np, "x-size", &pdata->x_max)) {
+		dev_err(dev, "failed to get x-size property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (of_property_read_u32(np, "y-size", &pdata->y_max)) {
+		dev_err(dev, "failed to get y-size property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* default to asserting the interrupt when the screen is touched */
+	pdata->int_setting = AUO_PIXCIR_INT_TOUCH_IND;
+
+	return pdata;
+}
+#else
+static struct auo_pixcir_ts_platdata *auo_pixcir_parse_dt(struct device *dev)
+{
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
+static void auo_pixcir_reset(void *data)
+{
+	struct auo_pixcir_ts *ts = data;
+
+	gpio_set_value(ts->pdata->gpio_rst, 0);
+}
+
+static int auo_pixcir_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	const struct auo_pixcir_ts_platdata *pdata;
+	struct auo_pixcir_ts *ts;
+	struct input_dev *input_dev;
+	int version;
+	int error;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (!pdata) {
+		pdata = auo_pixcir_parse_dt(&client->dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
+	ts = devm_kzalloc(&client->dev,
+			  sizeof(struct auo_pixcir_ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev) {
+		dev_err(&client->dev, "could not allocate input device\n");
+		return -ENOMEM;
+	}
+
+	ts->pdata = pdata;
+	ts->client = client;
+	ts->input = input_dev;
+	ts->touch_ind_mode = 0;
+	ts->stopped = true;
+	init_waitqueue_head(&ts->wait);
+
+	snprintf(ts->phys, sizeof(ts->phys),
+		 "%s/input0", dev_name(&client->dev));
+
+	input_dev->name = "AUO-Pixcir touchscreen";
+	input_dev->phys = ts->phys;
+	input_dev->id.bustype = BUS_I2C;
+
+	input_dev->open = auo_pixcir_input_open;
+	input_dev->close = auo_pixcir_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	/* For single touch */
+	input_set_abs_params(input_dev, ABS_X, 0, pdata->x_max, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, pdata->y_max, 0, 0);
+
+	/* For multi touch */
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
+			     pdata->x_max, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
+			     pdata->y_max, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
+			     AUO_PIXCIR_MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0,
+			     AUO_PIXCIR_MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+
+	input_set_drvdata(ts->input, ts);
+
+	error = devm_gpio_request_one(&client->dev, pdata->gpio_int,
+				      GPIOF_DIR_IN, "auo_pixcir_ts_int");
+	if (error) {
+		dev_err(&client->dev, "request of gpio %d failed, %d\n",
+			pdata->gpio_int, error);
+		return error;
+	}
+
+	error = devm_gpio_request_one(&client->dev, pdata->gpio_rst,
+				      GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+				      "auo_pixcir_ts_rst");
+	if (error) {
+		dev_err(&client->dev, "request of gpio %d failed, %d\n",
+			pdata->gpio_rst, error);
+		return error;
+	}
+
+	error = devm_add_action(&client->dev, auo_pixcir_reset, ts);
+	if (error) {
+		auo_pixcir_reset(ts);
+		dev_err(&client->dev, "failed to register reset action, %d\n",
+			error);
+		return error;
+	}
+
+	msleep(200);
+
+	version = i2c_smbus_read_byte_data(client, AUO_PIXCIR_REG_VERSION);
+	if (version < 0) {
+		error = version;
+		return error;
+	}
+
+	dev_info(&client->dev, "firmware version 0x%X\n", version);
+
+	error = auo_pixcir_int_config(ts, pdata->int_setting);
+	if (error)
+		return error;
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, auo_pixcir_interrupt,
+					  IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					  input_dev->name, ts);
+	if (error) {
+		dev_err(&client->dev, "irq %d requested failed, %d\n",
+			client->irq, error);
+		return error;
+	}
+
+	/* stop device and put it into deep sleep until it is opened */
+	error = auo_pixcir_stop(ts);
+	if (error)
+		return error;
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(&client->dev, "could not register input device, %d\n",
+			error);
+		return error;
+	}
+
+	i2c_set_clientdata(client, ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id auo_pixcir_idtable[] = {
+	{ "auo_pixcir_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, auo_pixcir_idtable);
+
+#ifdef CONFIG_OF
+static const struct of_device_id auo_pixcir_ts_dt_idtable[] = {
+	{ .compatible = "auo,auo_pixcir_ts" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, auo_pixcir_ts_dt_idtable);
+#endif
+
+static struct i2c_driver auo_pixcir_driver = {
+	.driver = {
+		.name	= "auo_pixcir_ts",
+		.pm	= &auo_pixcir_pm_ops,
+		.of_match_table	= of_match_ptr(auo_pixcir_ts_dt_idtable),
+	},
+	.probe		= auo_pixcir_probe,
+	.id_table	= auo_pixcir_idtable,
+};
+
+module_i2c_driver(auo_pixcir_driver);
+
+MODULE_DESCRIPTION("AUO-PIXCIR touchscreen driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
diff --git a/drivers/input/touchscreen/bcm_iproc_tsc.c b/drivers/input/touchscreen/bcm_iproc_tsc.c
new file mode 100644
index 0000000..ae460a5
--- /dev/null
+++ b/drivers/input/touchscreen/bcm_iproc_tsc.c
@@ -0,0 +1,522 @@
+/*
+* Copyright (C) 2015 Broadcom Corporation
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation version 2.
+*
+* This program is distributed "as is" WITHOUT ANY WARRANTY of any
+* kind, whether express or implied; without even the implied warranty
+* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+* GNU General Public License for more details.
+*/
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/keyboard.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <asm/irq.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/serio.h>
+
+#define IPROC_TS_NAME "iproc-ts"
+
+#define PEN_DOWN_STATUS     1
+#define PEN_UP_STATUS       0
+
+#define X_MIN               0
+#define Y_MIN               0
+#define X_MAX               0xFFF
+#define Y_MAX               0xFFF
+
+/* Value given by controller for invalid coordinate. */
+#define INVALID_COORD       0xFFFFFFFF
+
+/* Register offsets */
+#define REGCTL1             0x00
+#define REGCTL2             0x04
+#define INTERRUPT_THRES     0x08
+#define INTERRUPT_MASK      0x0c
+
+#define INTERRUPT_STATUS    0x10
+#define CONTROLLER_STATUS   0x14
+#define FIFO_DATA           0x18
+#define FIFO_DATA_X_Y_MASK  0xFFFF
+#define ANALOG_CONTROL      0x1c
+
+#define AUX_DATA            0x20
+#define DEBOUNCE_CNTR_STAT  0x24
+#define SCAN_CNTR_STAT      0x28
+#define REM_CNTR_STAT       0x2c
+
+#define SETTLING_TIMER_STAT 0x30
+#define SPARE_REG           0x34
+#define SOFT_BYPASS_CONTROL 0x38
+#define SOFT_BYPASS_DATA    0x3c
+
+
+/* Bit values for INTERRUPT_MASK and INTERRUPT_STATUS regs */
+#define TS_PEN_INTR_MASK        BIT(0)
+#define TS_FIFO_INTR_MASK       BIT(2)
+
+/* Bit values for CONTROLLER_STATUS reg1 */
+#define TS_PEN_DOWN             BIT(0)
+
+/* Shift values for control reg1 */
+#define SCANNING_PERIOD_SHIFT   24
+#define DEBOUNCE_TIMEOUT_SHIFT  16
+#define SETTLING_TIMEOUT_SHIFT  8
+#define TOUCH_TIMEOUT_SHIFT     0
+
+/* Shift values for coordinates from fifo */
+#define X_COORD_SHIFT  0
+#define Y_COORD_SHIFT  16
+
+/* Bit values for REGCTL2 */
+#define TS_CONTROLLER_EN_BIT    BIT(16)
+#define TS_CONTROLLER_AVGDATA_SHIFT 8
+#define TS_CONTROLLER_AVGDATA_MASK (0x7 << TS_CONTROLLER_AVGDATA_SHIFT)
+#define TS_CONTROLLER_PWR_LDO   BIT(5)
+#define TS_CONTROLLER_PWR_ADC   BIT(4)
+#define TS_CONTROLLER_PWR_BGP   BIT(3)
+#define TS_CONTROLLER_PWR_TS    BIT(2)
+#define TS_WIRE_MODE_BIT        BIT(1)
+
+#define dbg_reg(dev, priv, reg) \
+	dev_dbg(dev, "%20s= 0x%08x\n", #reg, readl((priv)->regs + reg))
+
+struct tsc_param {
+	/* Each step is 1024 us.  Valid 1-256 */
+	u32 scanning_period;
+
+	/*  Each step is 512 us.  Valid 0-255 */
+	u32 debounce_timeout;
+
+	/*
+	 * The settling duration (in ms) is the amount of time the tsc
+	 * waits to allow the voltage to settle after turning on the
+	 * drivers in detection mode. Valid values: 0-11
+	 *   0 =  0.008 ms
+	 *   1 =  0.01 ms
+	 *   2 =  0.02 ms
+	 *   3 =  0.04 ms
+	 *   4 =  0.08 ms
+	 *   5 =  0.16 ms
+	 *   6 =  0.32 ms
+	 *   7 =  0.64 ms
+	 *   8 =  1.28 ms
+	 *   9 =  2.56 ms
+	 *   10 = 5.12 ms
+	 *   11 = 10.24 ms
+	 */
+	u32 settling_timeout;
+
+	/* touch timeout in sample counts */
+	u32 touch_timeout;
+
+	/*
+	 * Number of data samples which are averaged before a final data point
+	 * is placed into the FIFO
+	 */
+	u32 average_data;
+
+	/* FIFO threshold */
+	u32 fifo_threshold;
+
+	/* Optional standard touchscreen properties. */
+	u32 max_x;
+	u32 max_y;
+	u32 fuzz_x;
+	u32 fuzz_y;
+	bool invert_x;
+	bool invert_y;
+};
+
+struct iproc_ts_priv {
+	struct platform_device *pdev;
+	struct input_dev *idev;
+
+	void __iomem *regs;
+	struct clk *tsc_clk;
+
+	int  pen_status;
+	struct tsc_param cfg_params;
+};
+
+/*
+ * Set default values the same as hardware reset values
+ * except for fifo_threshold with is set to 1.
+ */
+static const struct tsc_param iproc_default_config = {
+	.scanning_period  = 0x5,  /* 1 to 256 */
+	.debounce_timeout = 0x28, /* 0 to 255 */
+	.settling_timeout = 0x7,  /* 0 to 11 */
+	.touch_timeout    = 0xa,  /* 0 to 255 */
+	.average_data     = 5,    /* entry 5 = 32 pts */
+	.fifo_threshold   = 1,    /* 0 to 31 */
+	.max_x            = X_MAX,
+	.max_y            = Y_MAX,
+};
+
+static void ts_reg_dump(struct iproc_ts_priv *priv)
+{
+	struct device *dev = &priv->pdev->dev;
+
+	dbg_reg(dev, priv, REGCTL1);
+	dbg_reg(dev, priv, REGCTL2);
+	dbg_reg(dev, priv, INTERRUPT_THRES);
+	dbg_reg(dev, priv, INTERRUPT_MASK);
+	dbg_reg(dev, priv, INTERRUPT_STATUS);
+	dbg_reg(dev, priv, CONTROLLER_STATUS);
+	dbg_reg(dev, priv, FIFO_DATA);
+	dbg_reg(dev, priv, ANALOG_CONTROL);
+	dbg_reg(dev, priv, AUX_DATA);
+	dbg_reg(dev, priv, DEBOUNCE_CNTR_STAT);
+	dbg_reg(dev, priv, SCAN_CNTR_STAT);
+	dbg_reg(dev, priv, REM_CNTR_STAT);
+	dbg_reg(dev, priv, SETTLING_TIMER_STAT);
+	dbg_reg(dev, priv, SPARE_REG);
+	dbg_reg(dev, priv, SOFT_BYPASS_CONTROL);
+	dbg_reg(dev, priv, SOFT_BYPASS_DATA);
+}
+
+static irqreturn_t iproc_touchscreen_interrupt(int irq, void *data)
+{
+	struct platform_device *pdev = data;
+	struct iproc_ts_priv *priv = platform_get_drvdata(pdev);
+	u32 intr_status;
+	u32 raw_coordinate;
+	u16 x;
+	u16 y;
+	int i;
+	bool needs_sync = false;
+
+	intr_status = readl(priv->regs + INTERRUPT_STATUS);
+	intr_status &= TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+	if (intr_status == 0)
+		return IRQ_NONE;
+
+	/* Clear all interrupt status bits, write-1-clear */
+	writel(intr_status, priv->regs + INTERRUPT_STATUS);
+
+	/* Pen up/down */
+	if (intr_status & TS_PEN_INTR_MASK) {
+		if (readl(priv->regs + CONTROLLER_STATUS) & TS_PEN_DOWN)
+			priv->pen_status = PEN_DOWN_STATUS;
+		else
+			priv->pen_status = PEN_UP_STATUS;
+
+		input_report_key(priv->idev, BTN_TOUCH, priv->pen_status);
+		needs_sync = true;
+
+		dev_dbg(&priv->pdev->dev,
+			"pen up-down (%d)\n", priv->pen_status);
+	}
+
+	/* coordinates in FIFO exceed the theshold */
+	if (intr_status & TS_FIFO_INTR_MASK) {
+		for (i = 0; i < priv->cfg_params.fifo_threshold; i++) {
+			raw_coordinate = readl(priv->regs + FIFO_DATA);
+			if (raw_coordinate == INVALID_COORD)
+				continue;
+
+			/*
+			 * The x and y coordinate are 16 bits each
+			 * with the x in the lower 16 bits and y in the
+			 * upper 16 bits.
+			 */
+			x = (raw_coordinate >> X_COORD_SHIFT) &
+				FIFO_DATA_X_Y_MASK;
+			y = (raw_coordinate >> Y_COORD_SHIFT) &
+				FIFO_DATA_X_Y_MASK;
+
+			/* We only want to retain the 12 msb of the 16 */
+			x = (x >> 4) & 0x0FFF;
+			y = (y >> 4) & 0x0FFF;
+
+			/* adjust x y according to lcd tsc mount angle */
+			if (priv->cfg_params.invert_x)
+				x = priv->cfg_params.max_x - x;
+
+			if (priv->cfg_params.invert_y)
+				y = priv->cfg_params.max_y - y;
+
+			input_report_abs(priv->idev, ABS_X, x);
+			input_report_abs(priv->idev, ABS_Y, y);
+			needs_sync = true;
+
+			dev_dbg(&priv->pdev->dev, "xy (0x%x 0x%x)\n", x, y);
+		}
+	}
+
+	if (needs_sync)
+		input_sync(priv->idev);
+
+	return IRQ_HANDLED;
+}
+
+static int iproc_ts_start(struct input_dev *idev)
+{
+	struct iproc_ts_priv *priv = input_get_drvdata(idev);
+	u32 val;
+	int error;
+
+	/* Enable clock */
+	error = clk_prepare_enable(priv->tsc_clk);
+	if (error) {
+		dev_err(&priv->pdev->dev, "%s clk_prepare_enable failed %d\n",
+			__func__, error);
+		return error;
+	}
+
+	/*
+	 * Interrupt is generated when:
+	 *  FIFO reaches the int_th value, and pen event(up/down)
+	 */
+	val = TS_PEN_INTR_MASK | TS_FIFO_INTR_MASK;
+	writel(val, priv->regs + INTERRUPT_MASK);
+
+	writel(priv->cfg_params.fifo_threshold, priv->regs + INTERRUPT_THRES);
+
+	/* Initialize control reg1 */
+	val = 0;
+	val |= priv->cfg_params.scanning_period << SCANNING_PERIOD_SHIFT;
+	val |= priv->cfg_params.debounce_timeout << DEBOUNCE_TIMEOUT_SHIFT;
+	val |= priv->cfg_params.settling_timeout << SETTLING_TIMEOUT_SHIFT;
+	val |= priv->cfg_params.touch_timeout << TOUCH_TIMEOUT_SHIFT;
+	writel(val, priv->regs + REGCTL1);
+
+	/* Try to clear all interrupt status */
+	val = readl(priv->regs + INTERRUPT_STATUS);
+	val |= TS_FIFO_INTR_MASK | TS_PEN_INTR_MASK;
+	writel(val, priv->regs + INTERRUPT_STATUS);
+
+	/* Initialize control reg2 */
+	val = readl(priv->regs + REGCTL2);
+	val |= TS_CONTROLLER_EN_BIT | TS_WIRE_MODE_BIT;
+
+	val &= ~TS_CONTROLLER_AVGDATA_MASK;
+	val |= priv->cfg_params.average_data << TS_CONTROLLER_AVGDATA_SHIFT;
+
+	val &= ~(TS_CONTROLLER_PWR_LDO |	/* PWR up LDO */
+		   TS_CONTROLLER_PWR_ADC |	/* PWR up ADC */
+		   TS_CONTROLLER_PWR_BGP |	/* PWR up BGP */
+		   TS_CONTROLLER_PWR_TS);	/* PWR up TS */
+
+	writel(val, priv->regs + REGCTL2);
+
+	ts_reg_dump(priv);
+
+	return 0;
+}
+
+static void iproc_ts_stop(struct input_dev *dev)
+{
+	u32 val;
+	struct iproc_ts_priv *priv = input_get_drvdata(dev);
+
+	writel(0, priv->regs + INTERRUPT_MASK); /* Disable all interrupts */
+
+	/* Only power down touch screen controller */
+	val = readl(priv->regs + REGCTL2);
+	val |= TS_CONTROLLER_PWR_TS;
+	writel(val, priv->regs + REGCTL2);
+
+	clk_disable(priv->tsc_clk);
+}
+
+static int iproc_get_tsc_config(struct device *dev, struct iproc_ts_priv *priv)
+{
+	struct device_node *np = dev->of_node;
+	u32 val;
+
+	priv->cfg_params = iproc_default_config;
+
+	if (!np)
+		return 0;
+
+	if (of_property_read_u32(np, "scanning_period", &val) >= 0) {
+		if (val < 1 || val > 256) {
+			dev_err(dev, "scanning_period (%u) must be [1-256]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.scanning_period = val;
+	}
+
+	if (of_property_read_u32(np, "debounce_timeout", &val) >= 0) {
+		if (val > 255) {
+			dev_err(dev, "debounce_timeout (%u) must be [0-255]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.debounce_timeout = val;
+	}
+
+	if (of_property_read_u32(np, "settling_timeout", &val) >= 0) {
+		if (val > 11) {
+			dev_err(dev, "settling_timeout (%u) must be [0-11]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.settling_timeout = val;
+	}
+
+	if (of_property_read_u32(np, "touch_timeout", &val) >= 0) {
+		if (val > 255) {
+			dev_err(dev, "touch_timeout (%u) must be [0-255]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.touch_timeout = val;
+	}
+
+	if (of_property_read_u32(np, "average_data", &val) >= 0) {
+		if (val > 8) {
+			dev_err(dev, "average_data (%u) must be [0-8]\n", val);
+			return -EINVAL;
+		}
+		priv->cfg_params.average_data = val;
+	}
+
+	if (of_property_read_u32(np, "fifo_threshold", &val) >= 0) {
+		if (val > 31) {
+			dev_err(dev, "fifo_threshold (%u)) must be [0-31]\n",
+				val);
+			return -EINVAL;
+		}
+		priv->cfg_params.fifo_threshold = val;
+	}
+
+	/* Parse optional properties. */
+	of_property_read_u32(np, "touchscreen-size-x", &priv->cfg_params.max_x);
+	of_property_read_u32(np, "touchscreen-size-y", &priv->cfg_params.max_y);
+
+	of_property_read_u32(np, "touchscreen-fuzz-x",
+			     &priv->cfg_params.fuzz_x);
+	of_property_read_u32(np, "touchscreen-fuzz-y",
+			     &priv->cfg_params.fuzz_y);
+
+	priv->cfg_params.invert_x =
+		of_property_read_bool(np, "touchscreen-inverted-x");
+	priv->cfg_params.invert_y =
+		of_property_read_bool(np, "touchscreen-inverted-y");
+
+	return 0;
+}
+
+static int iproc_ts_probe(struct platform_device *pdev)
+{
+	struct iproc_ts_priv *priv;
+	struct input_dev *idev;
+	struct resource *res;
+	int irq;
+	int error;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* touchscreen controller memory mapped regs */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->regs = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->regs)) {
+		error = PTR_ERR(priv->regs);
+		dev_err(&pdev->dev, "unable to map I/O memory: %d\n", error);
+		return error;
+	}
+
+	priv->tsc_clk = devm_clk_get(&pdev->dev, "tsc_clk");
+	if (IS_ERR(priv->tsc_clk)) {
+		error = PTR_ERR(priv->tsc_clk);
+		dev_err(&pdev->dev,
+			"failed getting clock tsc_clk: %d\n", error);
+		return error;
+	}
+
+	priv->pdev = pdev;
+	error = iproc_get_tsc_config(&pdev->dev, priv);
+	if (error) {
+		dev_err(&pdev->dev, "get_tsc_config failed: %d\n", error);
+		return error;
+	}
+
+	idev = devm_input_allocate_device(&pdev->dev);
+	if (!idev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	priv->idev = idev;
+	priv->pen_status = PEN_UP_STATUS;
+
+	/* Set input device info  */
+	idev->name = IPROC_TS_NAME;
+	idev->dev.parent = &pdev->dev;
+
+	idev->id.bustype = BUS_HOST;
+	idev->id.vendor = SERIO_UNKNOWN;
+	idev->id.product = 0;
+	idev->id.version = 0;
+
+	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	__set_bit(BTN_TOUCH, idev->keybit);
+
+	input_set_abs_params(idev, ABS_X, X_MIN, priv->cfg_params.max_x,
+			     priv->cfg_params.fuzz_x, 0);
+	input_set_abs_params(idev, ABS_Y, Y_MIN, priv->cfg_params.max_y,
+			     priv->cfg_params.fuzz_y, 0);
+
+	idev->open = iproc_ts_start;
+	idev->close = iproc_ts_stop;
+
+	input_set_drvdata(idev, priv);
+	platform_set_drvdata(pdev, priv);
+
+	/* get interrupt */
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "platform_get_irq failed: %d\n", irq);
+		return irq;
+	}
+
+	error = devm_request_irq(&pdev->dev, irq,
+				 iproc_touchscreen_interrupt,
+				 IRQF_SHARED, IPROC_TS_NAME, pdev);
+	if (error)
+		return error;
+
+	error = input_register_device(priv->idev);
+	if (error) {
+		dev_err(&pdev->dev,
+			"failed to register input device: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id iproc_ts_of_match[] = {
+	{.compatible = "brcm,iproc-touchscreen", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, iproc_ts_of_match);
+
+static struct platform_driver iproc_ts_driver = {
+	.probe = iproc_ts_probe,
+	.driver = {
+		.name	= IPROC_TS_NAME,
+		.of_match_table = of_match_ptr(iproc_ts_of_match),
+	},
+};
+
+module_platform_driver(iproc_ts_driver);
+
+MODULE_DESCRIPTION("IPROC Touchscreen driver");
+MODULE_AUTHOR("Broadcom");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/bu21013_ts.c b/drivers/input/touchscreen/bu21013_ts.c
new file mode 100644
index 0000000..931417e
--- /dev/null
+++ b/drivers/input/touchscreen/bu21013_ts.c
@@ -0,0 +1,732 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2010
+ * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
+ * License terms:GNU General Public License (GPL) version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+#include <linux/input.h>
+#include <linux/input/bu21013.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+#define PEN_DOWN_INTR	0
+#define MAX_FINGERS	2
+#define RESET_DELAY	30
+#define PENUP_TIMEOUT	(10)
+#define DELTA_MIN	16
+#define MASK_BITS	0x03
+#define SHIFT_8		8
+#define SHIFT_2		2
+#define LENGTH_OF_BUFFER	11
+#define I2C_RETRY_COUNT	5
+
+#define BU21013_SENSORS_BTN_0_7_REG	0x70
+#define BU21013_SENSORS_BTN_8_15_REG	0x71
+#define BU21013_SENSORS_BTN_16_23_REG	0x72
+#define BU21013_X1_POS_MSB_REG		0x73
+#define BU21013_X1_POS_LSB_REG		0x74
+#define BU21013_Y1_POS_MSB_REG		0x75
+#define BU21013_Y1_POS_LSB_REG		0x76
+#define BU21013_X2_POS_MSB_REG		0x77
+#define BU21013_X2_POS_LSB_REG		0x78
+#define BU21013_Y2_POS_MSB_REG		0x79
+#define BU21013_Y2_POS_LSB_REG		0x7A
+#define BU21013_INT_CLR_REG		0xE8
+#define BU21013_INT_MODE_REG		0xE9
+#define BU21013_GAIN_REG		0xEA
+#define BU21013_OFFSET_MODE_REG		0xEB
+#define BU21013_XY_EDGE_REG		0xEC
+#define BU21013_RESET_REG		0xED
+#define BU21013_CALIB_REG		0xEE
+#define BU21013_DONE_REG		0xEF
+#define BU21013_SENSOR_0_7_REG		0xF0
+#define BU21013_SENSOR_8_15_REG		0xF1
+#define BU21013_SENSOR_16_23_REG	0xF2
+#define BU21013_POS_MODE1_REG		0xF3
+#define BU21013_POS_MODE2_REG		0xF4
+#define BU21013_CLK_MODE_REG		0xF5
+#define BU21013_IDLE_REG		0xFA
+#define BU21013_FILTER_REG		0xFB
+#define BU21013_TH_ON_REG		0xFC
+#define BU21013_TH_OFF_REG		0xFD
+
+
+#define BU21013_RESET_ENABLE		0x01
+
+#define BU21013_SENSORS_EN_0_7		0x3F
+#define BU21013_SENSORS_EN_8_15		0xFC
+#define BU21013_SENSORS_EN_16_23	0x1F
+
+#define BU21013_POS_MODE1_0		0x02
+#define BU21013_POS_MODE1_1		0x04
+#define BU21013_POS_MODE1_2		0x08
+
+#define BU21013_POS_MODE2_ZERO		0x01
+#define BU21013_POS_MODE2_AVG1		0x02
+#define BU21013_POS_MODE2_AVG2		0x04
+#define BU21013_POS_MODE2_EN_XY		0x08
+#define BU21013_POS_MODE2_EN_RAW	0x10
+#define BU21013_POS_MODE2_MULTI		0x80
+
+#define BU21013_CLK_MODE_DIV		0x01
+#define BU21013_CLK_MODE_EXT		0x02
+#define BU21013_CLK_MODE_CALIB		0x80
+
+#define BU21013_IDLET_0			0x01
+#define BU21013_IDLET_1			0x02
+#define BU21013_IDLET_2			0x04
+#define BU21013_IDLET_3			0x08
+#define BU21013_IDLE_INTERMIT_EN	0x10
+
+#define BU21013_DELTA_0_6	0x7F
+#define BU21013_FILTER_EN	0x80
+
+#define BU21013_INT_MODE_LEVEL	0x00
+#define BU21013_INT_MODE_EDGE	0x01
+
+#define BU21013_GAIN_0		0x01
+#define BU21013_GAIN_1		0x02
+#define BU21013_GAIN_2		0x04
+
+#define BU21013_OFFSET_MODE_DEFAULT	0x00
+#define BU21013_OFFSET_MODE_MOVE	0x01
+#define BU21013_OFFSET_MODE_DISABLE	0x02
+
+#define BU21013_TH_ON_0		0x01
+#define BU21013_TH_ON_1		0x02
+#define BU21013_TH_ON_2		0x04
+#define BU21013_TH_ON_3		0x08
+#define BU21013_TH_ON_4		0x10
+#define BU21013_TH_ON_5		0x20
+#define BU21013_TH_ON_6		0x40
+#define BU21013_TH_ON_7		0x80
+#define BU21013_TH_ON_MAX	0xFF
+
+#define BU21013_TH_OFF_0	0x01
+#define BU21013_TH_OFF_1	0x02
+#define BU21013_TH_OFF_2	0x04
+#define BU21013_TH_OFF_3	0x08
+#define BU21013_TH_OFF_4	0x10
+#define BU21013_TH_OFF_5	0x20
+#define BU21013_TH_OFF_6	0x40
+#define BU21013_TH_OFF_7	0x80
+#define BU21013_TH_OFF_MAX	0xFF
+
+#define BU21013_X_EDGE_0	0x01
+#define BU21013_X_EDGE_1	0x02
+#define BU21013_X_EDGE_2	0x04
+#define BU21013_X_EDGE_3	0x08
+#define BU21013_Y_EDGE_0	0x10
+#define BU21013_Y_EDGE_1	0x20
+#define BU21013_Y_EDGE_2	0x40
+#define BU21013_Y_EDGE_3	0x80
+
+#define BU21013_DONE	0x01
+#define BU21013_NUMBER_OF_X_SENSORS	(6)
+#define BU21013_NUMBER_OF_Y_SENSORS	(11)
+
+#define DRIVER_TP	"bu21013_tp"
+
+/**
+ * struct bu21013_ts_data - touch panel data structure
+ * @client: pointer to the i2c client
+ * @wait: variable to wait_queue_head_t structure
+ * @touch_stopped: touch stop flag
+ * @chip: pointer to the touch panel controller
+ * @in_dev: pointer to the input device structure
+ * @intr_pin: interrupt pin value
+ * @regulator: pointer to the Regulator used for touch screen
+ *
+ * Touch panel device data structure
+ */
+struct bu21013_ts_data {
+	struct i2c_client *client;
+	wait_queue_head_t wait;
+	const struct bu21013_platform_device *chip;
+	struct input_dev *in_dev;
+	struct regulator *regulator;
+	unsigned int irq;
+	unsigned int intr_pin;
+	bool touch_stopped;
+};
+
+/**
+ * bu21013_read_block_data(): read the touch co-ordinates
+ * @data: bu21013_ts_data structure pointer
+ * @buf: byte pointer
+ *
+ * Read the touch co-ordinates using i2c read block into buffer
+ * and returns integer.
+ */
+static int bu21013_read_block_data(struct bu21013_ts_data *data, u8 *buf)
+{
+	int ret, i;
+
+	for (i = 0; i < I2C_RETRY_COUNT; i++) {
+		ret = i2c_smbus_read_i2c_block_data
+			(data->client, BU21013_SENSORS_BTN_0_7_REG,
+				LENGTH_OF_BUFFER, buf);
+		if (ret == LENGTH_OF_BUFFER)
+			return 0;
+	}
+	return -EINVAL;
+}
+
+/**
+ * bu21013_do_touch_report(): Get the touch co-ordinates
+ * @data: bu21013_ts_data structure pointer
+ *
+ * Get the touch co-ordinates from touch sensor registers and writes
+ * into device structure and returns integer.
+ */
+static int bu21013_do_touch_report(struct bu21013_ts_data *data)
+{
+	u8	buf[LENGTH_OF_BUFFER];
+	unsigned int pos_x[2], pos_y[2];
+	bool	has_x_sensors, has_y_sensors;
+	int	finger_down_count = 0;
+	int	i;
+
+	if (data == NULL)
+		return -EINVAL;
+
+	if (bu21013_read_block_data(data, buf) < 0)
+		return -EINVAL;
+
+	has_x_sensors = hweight32(buf[0] & BU21013_SENSORS_EN_0_7);
+	has_y_sensors = hweight32(((buf[1] & BU21013_SENSORS_EN_8_15) |
+		((buf[2] & BU21013_SENSORS_EN_16_23) << SHIFT_8)) >> SHIFT_2);
+	if (!has_x_sensors || !has_y_sensors)
+		return 0;
+
+	for (i = 0; i < MAX_FINGERS; i++) {
+		const u8 *p = &buf[4 * i + 3];
+		unsigned int x = p[0] << SHIFT_2 | (p[1] & MASK_BITS);
+		unsigned int y = p[2] << SHIFT_2 | (p[3] & MASK_BITS);
+		if (x == 0 || y == 0)
+			continue;
+		pos_x[finger_down_count] = x;
+		pos_y[finger_down_count] = y;
+		finger_down_count++;
+	}
+
+	if (finger_down_count) {
+		if (finger_down_count == 2 &&
+		    (abs(pos_x[0] - pos_x[1]) < DELTA_MIN ||
+		     abs(pos_y[0] - pos_y[1]) < DELTA_MIN)) {
+			return 0;
+		}
+
+		for (i = 0; i < finger_down_count; i++) {
+			if (data->chip->x_flip)
+				pos_x[i] = data->chip->touch_x_max - pos_x[i];
+			if (data->chip->y_flip)
+				pos_y[i] = data->chip->touch_y_max - pos_y[i];
+
+			input_report_abs(data->in_dev,
+					 ABS_MT_POSITION_X, pos_x[i]);
+			input_report_abs(data->in_dev,
+					 ABS_MT_POSITION_Y, pos_y[i]);
+			input_mt_sync(data->in_dev);
+		}
+	} else
+		input_mt_sync(data->in_dev);
+
+	input_sync(data->in_dev);
+
+	return 0;
+}
+/**
+ * bu21013_gpio_irq() - gpio thread function for touch interrupt
+ * @irq: irq value
+ * @device_data: void pointer
+ *
+ * This gpio thread function for touch interrupt
+ * and returns irqreturn_t.
+ */
+static irqreturn_t bu21013_gpio_irq(int irq, void *device_data)
+{
+	struct bu21013_ts_data *data = device_data;
+	struct i2c_client *i2c = data->client;
+	int retval;
+
+	do {
+		retval = bu21013_do_touch_report(data);
+		if (retval < 0) {
+			dev_err(&i2c->dev, "bu21013_do_touch_report failed\n");
+			return IRQ_NONE;
+		}
+
+		data->intr_pin = gpio_get_value(data->chip->touch_pin);
+		if (data->intr_pin == PEN_DOWN_INTR)
+			wait_event_timeout(data->wait, data->touch_stopped,
+					   msecs_to_jiffies(2));
+	} while (!data->intr_pin && !data->touch_stopped);
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * bu21013_init_chip() - power on sequence for the bu21013 controller
+ * @data: device structure pointer
+ *
+ * This function is used to power on
+ * the bu21013 controller and returns integer.
+ */
+static int bu21013_init_chip(struct bu21013_ts_data *data)
+{
+	int retval;
+	struct i2c_client *i2c = data->client;
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_RESET_REG,
+					BU21013_RESET_ENABLE);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_RESET reg write failed\n");
+		return retval;
+	}
+	msleep(RESET_DELAY);
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_0_7_REG,
+					BU21013_SENSORS_EN_0_7);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_SENSOR_0_7 reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_8_15_REG,
+						BU21013_SENSORS_EN_8_15);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_SENSOR_8_15 reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_SENSOR_16_23_REG,
+						BU21013_SENSORS_EN_16_23);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_SENSOR_16_23 reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE1_REG,
+				(BU21013_POS_MODE1_0 | BU21013_POS_MODE1_1));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_POS_MODE1 reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_POS_MODE2_REG,
+			(BU21013_POS_MODE2_ZERO | BU21013_POS_MODE2_AVG1 |
+			BU21013_POS_MODE2_AVG2 | BU21013_POS_MODE2_EN_RAW |
+			BU21013_POS_MODE2_MULTI));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_POS_MODE2 reg write failed\n");
+		return retval;
+	}
+
+	if (data->chip->ext_clk)
+		retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG,
+			(BU21013_CLK_MODE_EXT | BU21013_CLK_MODE_CALIB));
+	else
+		retval = i2c_smbus_write_byte_data(i2c, BU21013_CLK_MODE_REG,
+			(BU21013_CLK_MODE_DIV | BU21013_CLK_MODE_CALIB));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_CLK_MODE reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_IDLE_REG,
+				(BU21013_IDLET_0 | BU21013_IDLE_INTERMIT_EN));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_IDLE reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_INT_MODE_REG,
+						BU21013_INT_MODE_LEVEL);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_INT_MODE reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_FILTER_REG,
+						(BU21013_DELTA_0_6 |
+							BU21013_FILTER_EN));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_FILTER reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_ON_REG,
+					BU21013_TH_ON_5);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_TH_ON reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_TH_OFF_REG,
+				BU21013_TH_OFF_4 | BU21013_TH_OFF_3);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_TH_OFF reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_GAIN_REG,
+					(BU21013_GAIN_0 | BU21013_GAIN_1));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_GAIN reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_OFFSET_MODE_REG,
+					BU21013_OFFSET_MODE_DEFAULT);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_OFFSET_MODE reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_XY_EDGE_REG,
+				(BU21013_X_EDGE_0 | BU21013_X_EDGE_2 |
+				BU21013_Y_EDGE_1 | BU21013_Y_EDGE_3));
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_XY_EDGE reg write failed\n");
+		return retval;
+	}
+
+	retval = i2c_smbus_write_byte_data(i2c, BU21013_DONE_REG,
+							BU21013_DONE);
+	if (retval < 0) {
+		dev_err(&i2c->dev, "BU21013_REG_DONE reg write failed\n");
+		return retval;
+	}
+
+	return 0;
+}
+
+/**
+ * bu21013_free_irq() - frees IRQ registered for touchscreen
+ * @bu21013_data: device structure pointer
+ *
+ * This function signals interrupt thread to stop processing and
+ * frees interrupt.
+ */
+static void bu21013_free_irq(struct bu21013_ts_data *bu21013_data)
+{
+	bu21013_data->touch_stopped = true;
+	wake_up(&bu21013_data->wait);
+	free_irq(bu21013_data->irq, bu21013_data);
+}
+
+/**
+ * bu21013_cs_disable() - deconfigures the touch panel controller
+ * @bu21013_data: device structure pointer
+ *
+ * This function is used to deconfigure the chip selection
+ * for touch panel controller.
+ */
+static void bu21013_cs_disable(struct bu21013_ts_data *bu21013_data)
+{
+	int error;
+
+	error = gpio_direction_output(bu21013_data->chip->cs_pin, 0);
+	if (error < 0)
+		dev_warn(&bu21013_data->client->dev,
+			 "%s: gpio direction failed, error: %d\n",
+			 __func__, error);
+	else
+		gpio_set_value(bu21013_data->chip->cs_pin, 0);
+
+	gpio_free(bu21013_data->chip->cs_pin);
+}
+
+#ifdef CONFIG_OF
+static const struct bu21013_platform_device *
+bu21013_parse_dt(struct device *dev)
+{
+	struct device_node *np = dev->of_node;
+	struct bu21013_platform_device *pdata;
+
+	if (!np) {
+		dev_err(dev, "no device tree or platform data\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata)
+		return ERR_PTR(-ENOMEM);
+
+	pdata->y_flip = pdata->x_flip = false;
+
+	pdata->x_flip = of_property_read_bool(np, "rohm,flip-x");
+	pdata->y_flip = of_property_read_bool(np, "rohm,flip-y");
+
+	of_property_read_u32(np, "rohm,touch-max-x", &pdata->touch_x_max);
+	of_property_read_u32(np, "rohm,touch-max-y", &pdata->touch_y_max);
+
+	pdata->touch_pin = of_get_named_gpio(np, "touch-gpio", 0);
+	pdata->cs_pin = of_get_named_gpio(np, "reset-gpio", 0);
+
+	pdata->ext_clk = false;
+
+	return pdata;
+}
+#else
+static inline const struct bu21013_platform_device *
+bu21013_parse_dt(struct device *dev)
+{
+	dev_err(dev, "no platform data available\n");
+	return ERR_PTR(-EINVAL);
+}
+#endif
+
+/**
+ * bu21013_probe() - initializes the i2c-client touchscreen driver
+ * @client: i2c client structure pointer
+ * @id: i2c device id pointer
+ *
+ * This function used to initializes the i2c-client touchscreen
+ * driver and returns integer.
+ */
+static int bu21013_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	const struct bu21013_platform_device *pdata =
+					dev_get_platdata(&client->dev);
+	struct bu21013_ts_data *bu21013_data;
+	struct input_dev *in_dev;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter,
+					I2C_FUNC_SMBUS_BYTE_DATA)) {
+		dev_err(&client->dev, "i2c smbus byte data not supported\n");
+		return -EIO;
+	}
+
+	if (!pdata) {
+		pdata = bu21013_parse_dt(&client->dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
+	if (!gpio_is_valid(pdata->touch_pin)) {
+		dev_err(&client->dev, "invalid touch_pin supplied\n");
+		return -EINVAL;
+	}
+
+	bu21013_data = kzalloc(sizeof(struct bu21013_ts_data), GFP_KERNEL);
+	in_dev = input_allocate_device();
+	if (!bu21013_data || !in_dev) {
+		dev_err(&client->dev, "device memory alloc failed\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	bu21013_data->in_dev = in_dev;
+	bu21013_data->chip = pdata;
+	bu21013_data->client = client;
+	bu21013_data->irq = gpio_to_irq(pdata->touch_pin);
+
+	bu21013_data->regulator = regulator_get(&client->dev, "avdd");
+	if (IS_ERR(bu21013_data->regulator)) {
+		dev_err(&client->dev, "regulator_get failed\n");
+		error = PTR_ERR(bu21013_data->regulator);
+		goto err_free_mem;
+	}
+
+	error = regulator_enable(bu21013_data->regulator);
+	if (error < 0) {
+		dev_err(&client->dev, "regulator enable failed\n");
+		goto err_put_regulator;
+	}
+
+	bu21013_data->touch_stopped = false;
+	init_waitqueue_head(&bu21013_data->wait);
+
+	/* configure the gpio pins */
+	error = gpio_request_one(pdata->cs_pin, GPIOF_OUT_INIT_HIGH,
+				 "touchp_reset");
+	if (error < 0) {
+		dev_err(&client->dev, "Unable to request gpio reset_pin\n");
+		goto err_disable_regulator;
+	}
+
+	/* configure the touch panel controller */
+	error = bu21013_init_chip(bu21013_data);
+	if (error) {
+		dev_err(&client->dev, "error in bu21013 config\n");
+		goto err_cs_disable;
+	}
+
+	/* register the device to input subsystem */
+	in_dev->name = DRIVER_TP;
+	in_dev->id.bustype = BUS_I2C;
+	in_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_SYN, in_dev->evbit);
+	__set_bit(EV_KEY, in_dev->evbit);
+	__set_bit(EV_ABS, in_dev->evbit);
+
+	input_set_abs_params(in_dev, ABS_MT_POSITION_X, 0,
+						pdata->touch_x_max, 0, 0);
+	input_set_abs_params(in_dev, ABS_MT_POSITION_Y, 0,
+						pdata->touch_y_max, 0, 0);
+	input_set_drvdata(in_dev, bu21013_data);
+
+	error = request_threaded_irq(bu21013_data->irq, NULL, bu21013_gpio_irq,
+				     IRQF_TRIGGER_FALLING | IRQF_SHARED |
+					IRQF_ONESHOT,
+				     DRIVER_TP, bu21013_data);
+	if (error) {
+		dev_err(&client->dev, "request irq %d failed\n",
+			bu21013_data->irq);
+		goto err_cs_disable;
+	}
+
+	error = input_register_device(in_dev);
+	if (error) {
+		dev_err(&client->dev, "failed to register input device\n");
+		goto err_free_irq;
+	}
+
+	device_init_wakeup(&client->dev, pdata->wakeup);
+	i2c_set_clientdata(client, bu21013_data);
+
+	return 0;
+
+err_free_irq:
+	bu21013_free_irq(bu21013_data);
+err_cs_disable:
+	bu21013_cs_disable(bu21013_data);
+err_disable_regulator:
+	regulator_disable(bu21013_data->regulator);
+err_put_regulator:
+	regulator_put(bu21013_data->regulator);
+err_free_mem:
+	input_free_device(in_dev);
+	kfree(bu21013_data);
+
+	return error;
+}
+/**
+ * bu21013_remove() - removes the i2c-client touchscreen driver
+ * @client: i2c client structure pointer
+ *
+ * This function uses to remove the i2c-client
+ * touchscreen driver and returns integer.
+ */
+static int bu21013_remove(struct i2c_client *client)
+{
+	struct bu21013_ts_data *bu21013_data = i2c_get_clientdata(client);
+
+	bu21013_free_irq(bu21013_data);
+
+	bu21013_cs_disable(bu21013_data);
+
+	input_unregister_device(bu21013_data->in_dev);
+
+	regulator_disable(bu21013_data->regulator);
+	regulator_put(bu21013_data->regulator);
+
+	kfree(bu21013_data);
+
+	device_init_wakeup(&client->dev, false);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+/**
+ * bu21013_suspend() - suspend the touch screen controller
+ * @dev: pointer to device structure
+ *
+ * This function is used to suspend the
+ * touch panel controller and returns integer
+ */
+static int bu21013_suspend(struct device *dev)
+{
+	struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev);
+	struct i2c_client *client = bu21013_data->client;
+
+	bu21013_data->touch_stopped = true;
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(bu21013_data->irq);
+	else
+		disable_irq(bu21013_data->irq);
+
+	regulator_disable(bu21013_data->regulator);
+
+	return 0;
+}
+
+/**
+ * bu21013_resume() - resume the touch screen controller
+ * @dev: pointer to device structure
+ *
+ * This function is used to resume the touch panel
+ * controller and returns integer.
+ */
+static int bu21013_resume(struct device *dev)
+{
+	struct bu21013_ts_data *bu21013_data = dev_get_drvdata(dev);
+	struct i2c_client *client = bu21013_data->client;
+	int retval;
+
+	retval = regulator_enable(bu21013_data->regulator);
+	if (retval < 0) {
+		dev_err(&client->dev, "bu21013 regulator enable failed\n");
+		return retval;
+	}
+
+	retval = bu21013_init_chip(bu21013_data);
+	if (retval < 0) {
+		dev_err(&client->dev, "bu21013 controller config failed\n");
+		return retval;
+	}
+
+	bu21013_data->touch_stopped = false;
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(bu21013_data->irq);
+	else
+		enable_irq(bu21013_data->irq);
+
+	return 0;
+}
+
+static const struct dev_pm_ops bu21013_dev_pm_ops = {
+	.suspend = bu21013_suspend,
+	.resume  = bu21013_resume,
+};
+#endif
+
+static const struct i2c_device_id bu21013_id[] = {
+	{ DRIVER_TP, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, bu21013_id);
+
+static struct i2c_driver bu21013_driver = {
+	.driver	= {
+		.name	=	DRIVER_TP,
+#ifdef CONFIG_PM
+		.pm	=	&bu21013_dev_pm_ops,
+#endif
+	},
+	.probe		=	bu21013_probe,
+	.remove		=	bu21013_remove,
+	.id_table	=	bu21013_id,
+};
+
+module_i2c_driver(bu21013_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Naveen Kumar G <naveen.gaddipati@stericsson.com>");
+MODULE_DESCRIPTION("bu21013 touch screen controller driver");
diff --git a/drivers/input/touchscreen/chipone_icn8318.c b/drivers/input/touchscreen/chipone_icn8318.c
new file mode 100644
index 0000000..22a6fea
--- /dev/null
+++ b/drivers/input/touchscreen/chipone_icn8318.c
@@ -0,0 +1,315 @@
+/*
+ * Driver for ChipOne icn8318 i2c touchscreen controller
+ *
+ * Copyright (c) 2015 Red Hat Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Red Hat authors:
+ * Hans de Goede <hdegoede@redhat.com>
+ */
+
+#include <linux/gpio/consumer.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+
+#define ICN8318_REG_POWER		4
+#define ICN8318_REG_TOUCHDATA		16
+
+#define ICN8318_POWER_ACTIVE		0
+#define ICN8318_POWER_MONITOR		1
+#define ICN8318_POWER_HIBERNATE		2
+
+#define ICN8318_MAX_TOUCHES		5
+
+struct icn8318_touch {
+	__u8 slot;
+	__be16 x;
+	__be16 y;
+	__u8 pressure;	/* Seems more like finger width then pressure really */
+	__u8 event;
+/* The difference between 2 and 3 is unclear */
+#define ICN8318_EVENT_NO_DATA	1 /* No finger seen yet since wakeup */
+#define ICN8318_EVENT_UPDATE1	2 /* New or updated coordinates */
+#define ICN8318_EVENT_UPDATE2	3 /* New or updated coordinates */
+#define ICN8318_EVENT_END	4 /* Finger lifted */
+} __packed;
+
+struct icn8318_touch_data {
+	__u8 softbutton;
+	__u8 touch_count;
+	struct icn8318_touch touches[ICN8318_MAX_TOUCHES];
+} __packed;
+
+struct icn8318_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct gpio_desc *wake_gpio;
+	u32 max_x;
+	u32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_x_y;
+};
+
+static int icn8318_read_touch_data(struct i2c_client *client,
+				   struct icn8318_touch_data *touch_data)
+{
+	u8 reg = ICN8318_REG_TOUCHDATA;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = client->addr,
+			.len = 1,
+			.buf = &reg
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(struct icn8318_touch_data),
+			.buf = (u8 *)touch_data
+		}
+	};
+
+	return i2c_transfer(client->adapter, msg, 2);
+}
+
+static inline bool icn8318_touch_active(u8 event)
+{
+	return (event == ICN8318_EVENT_UPDATE1) ||
+	       (event == ICN8318_EVENT_UPDATE2);
+}
+
+static irqreturn_t icn8318_irq(int irq, void *dev_id)
+{
+	struct icn8318_data *data = dev_id;
+	struct device *dev = &data->client->dev;
+	struct icn8318_touch_data touch_data;
+	int i, ret, x, y;
+
+	ret = icn8318_read_touch_data(data->client, &touch_data);
+	if (ret < 0) {
+		dev_err(dev, "Error reading touch data: %d\n", ret);
+		return IRQ_HANDLED;
+	}
+
+	if (touch_data.softbutton) {
+		/*
+		 * Other data is invalid when a softbutton is pressed.
+		 * This needs some extra devicetree bindings to map the icn8318
+		 * softbutton codes to evdev codes. Currently no known devices
+		 * use this.
+		 */
+		return IRQ_HANDLED;
+	}
+
+	if (touch_data.touch_count > ICN8318_MAX_TOUCHES) {
+		dev_warn(dev, "Too much touches %d > %d\n",
+			 touch_data.touch_count, ICN8318_MAX_TOUCHES);
+		touch_data.touch_count = ICN8318_MAX_TOUCHES;
+	}
+
+	for (i = 0; i < touch_data.touch_count; i++) {
+		struct icn8318_touch *touch = &touch_data.touches[i];
+		bool act = icn8318_touch_active(touch->event);
+
+		input_mt_slot(data->input, touch->slot);
+		input_mt_report_slot_state(data->input, MT_TOOL_FINGER, act);
+		if (!act)
+			continue;
+
+		x = be16_to_cpu(touch->x);
+		y = be16_to_cpu(touch->y);
+
+		if (data->invert_x)
+			x = data->max_x - x;
+
+		if (data->invert_y)
+			y = data->max_y - y;
+
+		if (!data->swap_x_y) {
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, x);
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, y);
+		} else {
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_X, y);
+			input_event(data->input, EV_ABS, ABS_MT_POSITION_Y, x);
+		}
+	}
+
+	input_mt_sync_frame(data->input);
+	input_sync(data->input);
+
+	return IRQ_HANDLED;
+}
+
+static int icn8318_start(struct input_dev *dev)
+{
+	struct icn8318_data *data = input_get_drvdata(dev);
+
+	enable_irq(data->client->irq);
+	gpiod_set_value_cansleep(data->wake_gpio, 1);
+
+	return 0;
+}
+
+static void icn8318_stop(struct input_dev *dev)
+{
+	struct icn8318_data *data = input_get_drvdata(dev);
+
+	disable_irq(data->client->irq);
+	i2c_smbus_write_byte_data(data->client, ICN8318_REG_POWER,
+				  ICN8318_POWER_HIBERNATE);
+	gpiod_set_value_cansleep(data->wake_gpio, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int icn8318_suspend(struct device *dev)
+{
+	struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&data->input->mutex);
+	if (data->input->users)
+		icn8318_stop(data->input);
+	mutex_unlock(&data->input->mutex);
+
+	return 0;
+}
+
+static int icn8318_resume(struct device *dev)
+{
+	struct icn8318_data *data = i2c_get_clientdata(to_i2c_client(dev));
+
+	mutex_lock(&data->input->mutex);
+	if (data->input->users)
+		icn8318_start(data->input);
+	mutex_unlock(&data->input->mutex);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(icn8318_pm_ops, icn8318_suspend, icn8318_resume);
+
+static int icn8318_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct device_node *np = dev->of_node;
+	struct icn8318_data *data;
+	struct input_dev *input;
+	u32 fuzz_x = 0, fuzz_y = 0;
+	int error;
+
+	if (!client->irq) {
+		dev_err(dev, "Error no irq specified\n");
+		return -EINVAL;
+	}
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->wake_gpio = devm_gpiod_get(dev, "wake", GPIOD_OUT_LOW);
+	if (IS_ERR(data->wake_gpio)) {
+		error = PTR_ERR(data->wake_gpio);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "Error getting wake gpio: %d\n", error);
+		return error;
+	}
+
+	if (of_property_read_u32(np, "touchscreen-size-x", &data->max_x) ||
+	    of_property_read_u32(np, "touchscreen-size-y", &data->max_y)) {
+		dev_err(dev, "Error touchscreen-size-x and/or -y missing\n");
+		return -EINVAL;
+	}
+
+	/* Optional */
+	of_property_read_u32(np, "touchscreen-fuzz-x", &fuzz_x);
+	of_property_read_u32(np, "touchscreen-fuzz-y", &fuzz_y);
+	data->invert_x = of_property_read_bool(np, "touchscreen-inverted-x");
+	data->invert_y = of_property_read_bool(np, "touchscreen-inverted-y");
+	data->swap_x_y = of_property_read_bool(np, "touchscreen-swapped-x-y");
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->open = icn8318_start;
+	input->close = icn8318_stop;
+	input->dev.parent = dev;
+
+	if (!data->swap_x_y) {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+				     data->max_x, fuzz_x, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+				     data->max_y, fuzz_y, 0);
+	} else {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+				     data->max_y, fuzz_y, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+				     data->max_x, fuzz_x, 0);
+	}
+
+	error = input_mt_init_slots(input, ICN8318_MAX_TOUCHES,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error)
+		return error;
+
+	data->client = client;
+	data->input = input;
+	input_set_drvdata(input, data);
+
+	error = devm_request_threaded_irq(dev, client->irq, NULL, icn8318_irq,
+					  IRQF_ONESHOT, client->name, data);
+	if (error) {
+		dev_err(dev, "Error requesting irq: %d\n", error);
+		return error;
+	}
+
+	/* Stop device till opened */
+	icn8318_stop(data->input);
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, data);
+
+	return 0;
+}
+
+static const struct of_device_id icn8318_of_match[] = {
+	{ .compatible = "chipone,icn8318" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, icn8318_of_match);
+
+/* This is useless for OF-enabled devices, but it is needed by I2C subsystem */
+static const struct i2c_device_id icn8318_i2c_id[] = {
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, icn8318_i2c_id);
+
+static struct i2c_driver icn8318_driver = {
+	.driver = {
+		.name	= "chipone_icn8318",
+		.pm	= &icn8318_pm_ops,
+		.of_match_table = icn8318_of_match,
+	},
+	.probe = icn8318_probe,
+	.id_table = icn8318_i2c_id,
+};
+
+module_i2c_driver(icn8318_driver);
+
+MODULE_DESCRIPTION("ChipOne icn8318 I2C Touchscreen Driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/colibri-vf50-ts.c b/drivers/input/touchscreen/colibri-vf50-ts.c
new file mode 100644
index 0000000..5d4903a
--- /dev/null
+++ b/drivers/input/touchscreen/colibri-vf50-ts.c
@@ -0,0 +1,386 @@
+/*
+ * Toradex Colibri VF50 Touchscreen driver
+ *
+ * Copyright 2015 Toradex AG
+ *
+ * Originally authored by Stefan Agner for 3.0 kernel
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+#include <linux/iio/consumer.h>
+#include <linux/iio/types.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define DRIVER_NAME			"colibri-vf50-ts"
+#define DRV_VERSION			"1.0"
+
+#define VF_ADC_MAX			((1 << 12) - 1)
+
+#define COLI_TOUCH_MIN_DELAY_US		1000
+#define COLI_TOUCH_MAX_DELAY_US		2000
+#define COLI_PULLUP_MIN_DELAY_US	10000
+#define COLI_PULLUP_MAX_DELAY_US	11000
+#define COLI_TOUCH_NO_OF_AVGS		5
+#define COLI_TOUCH_REQ_ADC_CHAN		4
+
+struct vf50_touch_device {
+	struct platform_device *pdev;
+	struct input_dev *ts_input;
+	struct iio_channel *channels;
+	struct gpio_desc *gpio_xp;
+	struct gpio_desc *gpio_xm;
+	struct gpio_desc *gpio_yp;
+	struct gpio_desc *gpio_ym;
+	int pen_irq;
+	int min_pressure;
+	bool stop_touchscreen;
+};
+
+/*
+ * Enables given plates and measures touch parameters using ADC
+ */
+static int adc_ts_measure(struct iio_channel *channel,
+			  struct gpio_desc *plate_p, struct gpio_desc *plate_m)
+{
+	int i, value = 0, val = 0;
+	int error;
+
+	gpiod_set_value(plate_p, 1);
+	gpiod_set_value(plate_m, 1);
+
+	usleep_range(COLI_TOUCH_MIN_DELAY_US, COLI_TOUCH_MAX_DELAY_US);
+
+	for (i = 0; i < COLI_TOUCH_NO_OF_AVGS; i++) {
+		error = iio_read_channel_raw(channel, &val);
+		if (error < 0) {
+			value = error;
+			goto error_iio_read;
+		}
+
+		value += val;
+	}
+
+	value /= COLI_TOUCH_NO_OF_AVGS;
+
+error_iio_read:
+	gpiod_set_value(plate_p, 0);
+	gpiod_set_value(plate_m, 0);
+
+	return value;
+}
+
+/*
+ * Enable touch detection using falling edge detection on XM
+ */
+static void vf50_ts_enable_touch_detection(struct vf50_touch_device *vf50_ts)
+{
+	/* Enable plate YM (needs to be strong GND, high active) */
+	gpiod_set_value(vf50_ts->gpio_ym, 1);
+
+	/*
+	 * Let the platform mux to idle state in order to enable
+	 * Pull-Up on GPIO
+	 */
+	pinctrl_pm_select_idle_state(&vf50_ts->pdev->dev);
+
+	/* Wait for the pull-up to be stable on high */
+	usleep_range(COLI_PULLUP_MIN_DELAY_US, COLI_PULLUP_MAX_DELAY_US);
+}
+
+/*
+ * ADC touch screen sampling bottom half irq handler
+ */
+static irqreturn_t vf50_ts_irq_bh(int irq, void *private)
+{
+	struct vf50_touch_device *vf50_ts = private;
+	struct device *dev = &vf50_ts->pdev->dev;
+	int val_x, val_y, val_z1, val_z2, val_p = 0;
+	bool discard_val_on_start = true;
+
+	/* Disable the touch detection plates */
+	gpiod_set_value(vf50_ts->gpio_ym, 0);
+
+	/* Let the platform mux to default state in order to mux as ADC */
+	pinctrl_pm_select_default_state(dev);
+
+	while (!vf50_ts->stop_touchscreen) {
+		/* X-Direction */
+		val_x = adc_ts_measure(&vf50_ts->channels[0],
+				vf50_ts->gpio_xp, vf50_ts->gpio_xm);
+		if (val_x < 0)
+			break;
+
+		/* Y-Direction */
+		val_y = adc_ts_measure(&vf50_ts->channels[1],
+				vf50_ts->gpio_yp, vf50_ts->gpio_ym);
+		if (val_y < 0)
+			break;
+
+		/*
+		 * Touch pressure
+		 * Measure on XP/YM
+		 */
+		val_z1 = adc_ts_measure(&vf50_ts->channels[2],
+				vf50_ts->gpio_yp, vf50_ts->gpio_xm);
+		if (val_z1 < 0)
+			break;
+		val_z2 = adc_ts_measure(&vf50_ts->channels[3],
+				vf50_ts->gpio_yp, vf50_ts->gpio_xm);
+		if (val_z2 < 0)
+			break;
+
+		/* Validate signal (avoid calculation using noise) */
+		if (val_z1 > 64 && val_x > 64) {
+			/*
+			 * Calculate resistance between the plates
+			 * lower resistance means higher pressure
+			 */
+			int r_x = (1000 * val_x) / VF_ADC_MAX;
+
+			val_p = (r_x * val_z2) / val_z1 - r_x;
+
+		} else {
+			val_p = 2000;
+		}
+
+		val_p = 2000 - val_p;
+		dev_dbg(dev,
+			"Measured values: x: %d, y: %d, z1: %d, z2: %d, p: %d\n",
+			val_x, val_y, val_z1, val_z2, val_p);
+
+		/*
+		 * If touch pressure is too low, stop measuring and reenable
+		 * touch detection
+		 */
+		if (val_p < vf50_ts->min_pressure || val_p > 2000)
+			break;
+
+		/*
+		 * The pressure may not be enough for the first x and the
+		 * second y measurement, but, the pressure is ok when the
+		 * driver is doing the third and fourth measurement. To
+		 * take care of this, we drop the first measurement always.
+		 */
+		if (discard_val_on_start) {
+			discard_val_on_start = false;
+		} else {
+			/*
+			 * Report touch position and sleep for
+			 * the next measurement.
+			 */
+			input_report_abs(vf50_ts->ts_input,
+					ABS_X, VF_ADC_MAX - val_x);
+			input_report_abs(vf50_ts->ts_input,
+					ABS_Y, VF_ADC_MAX - val_y);
+			input_report_abs(vf50_ts->ts_input,
+					ABS_PRESSURE, val_p);
+			input_report_key(vf50_ts->ts_input, BTN_TOUCH, 1);
+			input_sync(vf50_ts->ts_input);
+		}
+
+		usleep_range(COLI_PULLUP_MIN_DELAY_US,
+			     COLI_PULLUP_MAX_DELAY_US);
+	}
+
+	/* Report no more touch, re-enable touch detection */
+	input_report_abs(vf50_ts->ts_input, ABS_PRESSURE, 0);
+	input_report_key(vf50_ts->ts_input, BTN_TOUCH, 0);
+	input_sync(vf50_ts->ts_input);
+
+	vf50_ts_enable_touch_detection(vf50_ts);
+
+	return IRQ_HANDLED;
+}
+
+static int vf50_ts_open(struct input_dev *dev_input)
+{
+	struct vf50_touch_device *touchdev = input_get_drvdata(dev_input);
+	struct device *dev = &touchdev->pdev->dev;
+
+	dev_dbg(dev, "Input device %s opened, starting touch detection\n",
+		dev_input->name);
+
+	touchdev->stop_touchscreen = false;
+
+	/* Mux detection before request IRQ, wait for pull-up to settle */
+	vf50_ts_enable_touch_detection(touchdev);
+
+	return 0;
+}
+
+static void vf50_ts_close(struct input_dev *dev_input)
+{
+	struct vf50_touch_device *touchdev = input_get_drvdata(dev_input);
+	struct device *dev = &touchdev->pdev->dev;
+
+	touchdev->stop_touchscreen = true;
+
+	/* Make sure IRQ is not running past close */
+	mb();
+	synchronize_irq(touchdev->pen_irq);
+
+	gpiod_set_value(touchdev->gpio_ym, 0);
+	pinctrl_pm_select_default_state(dev);
+
+	dev_dbg(dev, "Input device %s closed, disable touch detection\n",
+		dev_input->name);
+}
+
+static int vf50_ts_get_gpiod(struct device *dev, struct gpio_desc **gpio_d,
+			     const char *con_id, enum gpiod_flags flags)
+{
+	int error;
+
+	*gpio_d = devm_gpiod_get(dev, con_id, flags);
+	if (IS_ERR(*gpio_d)) {
+		error = PTR_ERR(*gpio_d);
+		dev_err(dev, "Could not get gpio_%s %d\n", con_id, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static void vf50_ts_channel_release(void *data)
+{
+	struct iio_channel *channels = data;
+
+	iio_channel_release_all(channels);
+}
+
+static int vf50_ts_probe(struct platform_device *pdev)
+{
+	struct input_dev *input;
+	struct iio_channel *channels;
+	struct device *dev = &pdev->dev;
+	struct vf50_touch_device *touchdev;
+	int num_adc_channels;
+	int error;
+
+	channels = iio_channel_get_all(dev);
+	if (IS_ERR(channels))
+		return PTR_ERR(channels);
+
+	error = devm_add_action(dev, vf50_ts_channel_release, channels);
+	if (error) {
+		iio_channel_release_all(channels);
+		dev_err(dev, "Failed to register iio channel release action");
+		return error;
+	}
+
+	num_adc_channels = 0;
+	while (channels[num_adc_channels].indio_dev)
+		num_adc_channels++;
+
+	if (num_adc_channels != COLI_TOUCH_REQ_ADC_CHAN) {
+		dev_err(dev, "Inadequate ADC channels specified\n");
+		return -EINVAL;
+	}
+
+	touchdev = devm_kzalloc(dev, sizeof(*touchdev), GFP_KERNEL);
+	if (!touchdev)
+		return -ENOMEM;
+
+	touchdev->pdev = pdev;
+	touchdev->channels = channels;
+
+	error = of_property_read_u32(dev->of_node, "vf50-ts-min-pressure",
+				 &touchdev->min_pressure);
+	if (error)
+		return error;
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "Failed to allocate TS input device\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, touchdev);
+
+	input->name = DRIVER_NAME;
+	input->id.bustype = BUS_HOST;
+	input->dev.parent = dev;
+	input->open = vf50_ts_open;
+	input->close = vf50_ts_close;
+
+	input_set_capability(input, EV_KEY, BTN_TOUCH);
+	input_set_abs_params(input, ABS_X, 0, VF_ADC_MAX, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, VF_ADC_MAX, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE, 0, VF_ADC_MAX, 0, 0);
+
+	touchdev->ts_input = input;
+	input_set_drvdata(input, touchdev);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "Failed to register input device\n");
+		return error;
+	}
+
+	error = vf50_ts_get_gpiod(dev, &touchdev->gpio_xp, "xp", GPIOD_OUT_LOW);
+	if (error)
+		return error;
+
+	error = vf50_ts_get_gpiod(dev, &touchdev->gpio_xm,
+				"xm", GPIOD_OUT_LOW);
+	if (error)
+		return error;
+
+	error = vf50_ts_get_gpiod(dev, &touchdev->gpio_yp, "yp", GPIOD_OUT_LOW);
+	if (error)
+		return error;
+
+	error = vf50_ts_get_gpiod(dev, &touchdev->gpio_ym, "ym", GPIOD_OUT_LOW);
+	if (error)
+		return error;
+
+	touchdev->pen_irq = platform_get_irq(pdev, 0);
+	if (touchdev->pen_irq < 0)
+		return touchdev->pen_irq;
+
+	error = devm_request_threaded_irq(dev, touchdev->pen_irq,
+					  NULL, vf50_ts_irq_bh, IRQF_ONESHOT,
+					  "vf50 touch", touchdev);
+	if (error) {
+		dev_err(dev, "Failed to request IRQ %d: %d\n",
+			touchdev->pen_irq, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id vf50_touch_of_match[] = {
+	{ .compatible = "toradex,vf50-touchscreen", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, vf50_touch_of_match);
+
+static struct platform_driver vf50_touch_driver = {
+	.driver = {
+		.name = "toradex,vf50_touchctrl",
+		.of_match_table = vf50_touch_of_match,
+	},
+	.probe = vf50_ts_probe,
+};
+module_platform_driver(vf50_touch_driver);
+
+MODULE_AUTHOR("Sanchayan Maity");
+MODULE_DESCRIPTION("Colibri VF50 Touchscreen driver");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_VERSION);
diff --git a/drivers/input/touchscreen/cy8ctmg110_ts.c b/drivers/input/touchscreen/cy8ctmg110_ts.c
new file mode 100644
index 0000000..cc1d135
--- /dev/null
+++ b/drivers/input/touchscreen/cy8ctmg110_ts.c
@@ -0,0 +1,362 @@
+/*
+ * Driver for cypress touch screen controller
+ *
+ * Copyright (c) 2009 Aava Mobile
+ *
+ * Some cleanups by Alan Cox <alan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/i2c.h>
+#include <linux/gpio.h>
+#include <linux/input/cy8ctmg110_pdata.h>
+
+#define CY8CTMG110_DRIVER_NAME      "cy8ctmg110"
+
+/* Touch coordinates */
+#define CY8CTMG110_X_MIN		0
+#define CY8CTMG110_Y_MIN		0
+#define CY8CTMG110_X_MAX		759
+#define CY8CTMG110_Y_MAX		465
+
+
+/* cy8ctmg110 register definitions */
+#define CY8CTMG110_TOUCH_WAKEUP_TIME	0
+#define CY8CTMG110_TOUCH_SLEEP_TIME	2
+#define CY8CTMG110_TOUCH_X1		3
+#define CY8CTMG110_TOUCH_Y1		5
+#define CY8CTMG110_TOUCH_X2		7
+#define CY8CTMG110_TOUCH_Y2		9
+#define CY8CTMG110_FINGERS		11
+#define CY8CTMG110_GESTURE		12
+#define CY8CTMG110_REG_MAX		13
+
+
+/*
+ * The touch driver structure.
+ */
+struct cy8ctmg110 {
+	struct input_dev *input;
+	char phys[32];
+	struct i2c_client *client;
+	int reset_pin;
+	int irq_pin;
+};
+
+/*
+ * cy8ctmg110_power is the routine that is called when touch hardware
+ * will powered off or on.
+ */
+static void cy8ctmg110_power(struct cy8ctmg110 *ts, bool poweron)
+{
+	if (ts->reset_pin)
+		gpio_direction_output(ts->reset_pin, 1 - poweron);
+}
+
+static int cy8ctmg110_write_regs(struct cy8ctmg110 *tsc, unsigned char reg,
+		unsigned char len, unsigned char *value)
+{
+	struct i2c_client *client = tsc->client;
+	int ret;
+	unsigned char i2c_data[6];
+
+	BUG_ON(len > 5);
+
+	i2c_data[0] = reg;
+	memcpy(i2c_data + 1, value, len);
+
+	ret = i2c_master_send(client, i2c_data, len + 1);
+	if (ret != len + 1) {
+		dev_err(&client->dev, "i2c write data cmd failed\n");
+		return ret < 0 ? ret : -EIO;
+	}
+
+	return 0;
+}
+
+static int cy8ctmg110_read_regs(struct cy8ctmg110 *tsc,
+		unsigned char *data, unsigned char len, unsigned char cmd)
+{
+	struct i2c_client *client = tsc->client;
+	int ret;
+	struct i2c_msg msg[2] = {
+		/* first write slave position to i2c devices */
+		{
+			.addr = client->addr,
+			.len = 1,
+			.buf = &cmd
+		},
+		/* Second read data from position */
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = len,
+			.buf = data
+		}
+	};
+
+	ret = i2c_transfer(client->adapter, msg, 2);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int cy8ctmg110_touch_pos(struct cy8ctmg110 *tsc)
+{
+	struct input_dev *input = tsc->input;
+	unsigned char reg_p[CY8CTMG110_REG_MAX];
+	int x, y;
+
+	memset(reg_p, 0, CY8CTMG110_REG_MAX);
+
+	/* Reading coordinates */
+	if (cy8ctmg110_read_regs(tsc, reg_p, 9, CY8CTMG110_TOUCH_X1) != 0)
+		return -EIO;
+
+	y = reg_p[2] << 8 | reg_p[3];
+	x = reg_p[0] << 8 | reg_p[1];
+
+	/* Number of touch */
+	if (reg_p[8] == 0) {
+		input_report_key(input, BTN_TOUCH, 0);
+	} else  {
+		input_report_key(input, BTN_TOUCH, 1);
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+	}
+
+	input_sync(input);
+
+	return 0;
+}
+
+static int cy8ctmg110_set_sleepmode(struct cy8ctmg110 *ts, bool sleep)
+{
+	unsigned char reg_p[3];
+
+	if (sleep) {
+		reg_p[0] = 0x00;
+		reg_p[1] = 0xff;
+		reg_p[2] = 5;
+	} else {
+		reg_p[0] = 0x10;
+		reg_p[1] = 0xff;
+		reg_p[2] = 0;
+	}
+
+	return cy8ctmg110_write_regs(ts, CY8CTMG110_TOUCH_WAKEUP_TIME, 3, reg_p);
+}
+
+static irqreturn_t cy8ctmg110_irq_thread(int irq, void *dev_id)
+{
+	struct cy8ctmg110 *tsc = dev_id;
+
+	cy8ctmg110_touch_pos(tsc);
+
+	return IRQ_HANDLED;
+}
+
+static int cy8ctmg110_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	const struct cy8ctmg110_pdata *pdata = dev_get_platdata(&client->dev);
+	struct cy8ctmg110 *ts;
+	struct input_dev *input_dev;
+	int err;
+
+	/* No pdata no way forward */
+	if (pdata == NULL) {
+		dev_err(&client->dev, "no pdata\n");
+		return -ENODEV;
+	}
+
+	if (!i2c_check_functionality(client->adapter,
+					I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -EIO;
+
+	ts = kzalloc(sizeof(struct cy8ctmg110), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->client = client;
+	ts->input = input_dev;
+	ts->reset_pin = pdata->reset_pin;
+	ts->irq_pin = pdata->irq_pin;
+
+	snprintf(ts->phys, sizeof(ts->phys),
+		 "%s/input0", dev_name(&client->dev));
+
+	input_dev->name = CY8CTMG110_DRIVER_NAME " Touchscreen";
+	input_dev->phys = ts->phys;
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X,
+			CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 4, 0);
+	input_set_abs_params(input_dev, ABS_Y,
+			CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 4, 0);
+
+	if (ts->reset_pin) {
+		err = gpio_request(ts->reset_pin, NULL);
+		if (err) {
+			dev_err(&client->dev,
+				"Unable to request GPIO pin %d.\n",
+				ts->reset_pin);
+			goto err_free_mem;
+		}
+	}
+
+	cy8ctmg110_power(ts, true);
+	cy8ctmg110_set_sleepmode(ts, false);
+
+	err = gpio_request(ts->irq_pin, "touch_irq_key");
+	if (err < 0) {
+		dev_err(&client->dev,
+			"Failed to request GPIO %d, error %d\n",
+			ts->irq_pin, err);
+		goto err_shutoff_device;
+	}
+
+	err = gpio_direction_input(ts->irq_pin);
+	if (err < 0) {
+		dev_err(&client->dev,
+			"Failed to configure input direction for GPIO %d, error %d\n",
+			ts->irq_pin, err);
+		goto err_free_irq_gpio;
+	}
+
+	client->irq = gpio_to_irq(ts->irq_pin);
+	if (client->irq < 0) {
+		err = client->irq;
+		dev_err(&client->dev,
+			"Unable to get irq number for GPIO %d, error %d\n",
+			ts->irq_pin, err);
+		goto err_free_irq_gpio;
+	}
+
+	err = request_threaded_irq(client->irq, NULL, cy8ctmg110_irq_thread,
+				   IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				   "touch_reset_key", ts);
+	if (err < 0) {
+		dev_err(&client->dev,
+			"irq %d busy? error %d\n", client->irq, err);
+		goto err_free_irq_gpio;
+	}
+
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_free_irq;
+
+	i2c_set_clientdata(client, ts);
+	device_init_wakeup(&client->dev, 1);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, ts);
+err_free_irq_gpio:
+	gpio_free(ts->irq_pin);
+err_shutoff_device:
+	cy8ctmg110_set_sleepmode(ts, true);
+	cy8ctmg110_power(ts, false);
+	if (ts->reset_pin)
+		gpio_free(ts->reset_pin);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+	return err;
+}
+
+static int __maybe_unused cy8ctmg110_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+	else {
+		cy8ctmg110_set_sleepmode(ts, true);
+		cy8ctmg110_power(ts, false);
+	}
+	return 0;
+}
+
+static int __maybe_unused cy8ctmg110_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+	else {
+		cy8ctmg110_power(ts, true);
+		cy8ctmg110_set_sleepmode(ts, false);
+	}
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cy8ctmg110_pm, cy8ctmg110_suspend, cy8ctmg110_resume);
+
+static int cy8ctmg110_remove(struct i2c_client *client)
+{
+	struct cy8ctmg110 *ts = i2c_get_clientdata(client);
+
+	cy8ctmg110_set_sleepmode(ts, true);
+	cy8ctmg110_power(ts, false);
+
+	free_irq(client->irq, ts);
+	input_unregister_device(ts->input);
+	gpio_free(ts->irq_pin);
+	if (ts->reset_pin)
+		gpio_free(ts->reset_pin);
+	kfree(ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id cy8ctmg110_idtable[] = {
+	{ CY8CTMG110_DRIVER_NAME, 1 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, cy8ctmg110_idtable);
+
+static struct i2c_driver cy8ctmg110_driver = {
+	.driver		= {
+		.name	= CY8CTMG110_DRIVER_NAME,
+		.pm	= &cy8ctmg110_pm,
+	},
+	.id_table	= cy8ctmg110_idtable,
+	.probe		= cy8ctmg110_probe,
+	.remove		= cy8ctmg110_remove,
+};
+
+module_i2c_driver(cy8ctmg110_driver);
+
+MODULE_AUTHOR("Samuli Konttila <samuli.konttila@aavamobile.com>");
+MODULE_DESCRIPTION("cy8ctmg110 TouchScreen Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/cyttsp4_core.c b/drivers/input/touchscreen/cyttsp4_core.c
new file mode 100644
index 0000000..5ed3105
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp4_core.c
@@ -0,0 +1,2157 @@
+/*
+ * cyttsp4_core.c
+ * Cypress TrueTouch(TM) Standard Product V4 Core driver module.
+ * For use with Cypress Txx4xx parts.
+ * Supported parts include:
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2012 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#include "cyttsp4_core.h"
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/pm_runtime.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+
+/* Timeout in ms. */
+#define CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT	500
+#define CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT	5000
+#define CY_CORE_MODE_CHANGE_TIMEOUT		1000
+#define CY_CORE_RESET_AND_WAIT_TIMEOUT		500
+#define CY_CORE_WAKEUP_TIMEOUT			500
+
+#define CY_CORE_STARTUP_RETRY_COUNT		3
+
+static const u8 ldr_exit[] = {
+	0xFF, 0x01, 0x3B, 0x00, 0x00, 0x4F, 0x6D, 0x17
+};
+
+static const u8 ldr_err_app[] = {
+	0x01, 0x02, 0x00, 0x00, 0x55, 0xDD, 0x17
+};
+
+static inline size_t merge_bytes(u8 high, u8 low)
+{
+	return (high << 8) + low;
+}
+
+#ifdef VERBOSE_DEBUG
+static void cyttsp4_pr_buf(struct device *dev, u8 *pr_buf, u8 *dptr, int size,
+		const char *data_name)
+{
+	int i, k;
+	const char fmt[] = "%02X ";
+	int max;
+
+	if (!size)
+		return;
+
+	max = (CY_MAX_PRBUF_SIZE - 1) - sizeof(CY_PR_TRUNCATED);
+
+	pr_buf[0] = 0;
+	for (i = k = 0; i < size && k < max; i++, k += 3)
+		scnprintf(pr_buf + k, CY_MAX_PRBUF_SIZE, fmt, dptr[i]);
+
+	dev_vdbg(dev, "%s:  %s[0..%d]=%s%s\n", __func__, data_name, size - 1,
+			pr_buf, size <= max ? "" : CY_PR_TRUNCATED);
+}
+#else
+#define cyttsp4_pr_buf(dev, pr_buf, dptr, size, data_name) do { } while (0)
+#endif
+
+static int cyttsp4_load_status_regs(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	struct device *dev = cd->dev;
+	int rc;
+
+	rc = cyttsp4_adap_read(cd, CY_REG_BASE, si->si_ofs.mode_size,
+			si->xy_mode);
+	if (rc < 0)
+		dev_err(dev, "%s: fail read mode regs r=%d\n",
+			__func__, rc);
+	else
+		cyttsp4_pr_buf(dev, cd->pr_buf, si->xy_mode,
+			si->si_ofs.mode_size, "xy_mode");
+
+	return rc;
+}
+
+static int cyttsp4_handshake(struct cyttsp4 *cd, u8 mode)
+{
+	u8 cmd = mode ^ CY_HST_TOGGLE;
+	int rc;
+
+	/*
+	 * Mode change issued, handshaking now will cause endless mode change
+	 * requests, for sync mode modechange will do same with handshake
+	 * */
+	if (mode & CY_HST_MODE_CHANGE)
+		return 0;
+
+	rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(cmd), &cmd);
+	if (rc < 0)
+		dev_err(cd->dev, "%s: bus write fail on handshake (ret=%d)\n",
+				__func__, rc);
+
+	return rc;
+}
+
+static int cyttsp4_hw_soft_reset(struct cyttsp4 *cd)
+{
+	u8 cmd = CY_HST_RESET;
+	int rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(cmd), &cmd);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: FAILED to execute SOFT reset\n",
+				__func__);
+		return rc;
+	}
+	return 0;
+}
+
+static int cyttsp4_hw_hard_reset(struct cyttsp4 *cd)
+{
+	if (cd->cpdata->xres) {
+		cd->cpdata->xres(cd->cpdata, cd->dev);
+		dev_dbg(cd->dev, "%s: execute HARD reset\n", __func__);
+		return 0;
+	}
+	dev_err(cd->dev, "%s: FAILED to execute HARD reset\n", __func__);
+	return -ENOSYS;
+}
+
+static int cyttsp4_hw_reset(struct cyttsp4 *cd)
+{
+	int rc = cyttsp4_hw_hard_reset(cd);
+	if (rc == -ENOSYS)
+		rc = cyttsp4_hw_soft_reset(cd);
+	return rc;
+}
+
+/*
+ * Gets number of bits for a touch filed as parameter,
+ * sets maximum value for field which is used as bit mask
+ * and returns number of bytes required for that field
+ */
+static int cyttsp4_bits_2_bytes(unsigned int nbits, size_t *max)
+{
+	*max = 1UL << nbits;
+	return (nbits + 7) / 8;
+}
+
+static int cyttsp4_si_data_offsets(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	int rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(si->si_data),
+			&si->si_data);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read sysinfo data offsets r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	/* Print sysinfo data offsets */
+	cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)&si->si_data,
+		       sizeof(si->si_data), "sysinfo_data_offsets");
+
+	/* convert sysinfo data offset bytes into integers */
+
+	si->si_ofs.map_sz = merge_bytes(si->si_data.map_szh,
+			si->si_data.map_szl);
+	si->si_ofs.map_sz = merge_bytes(si->si_data.map_szh,
+			si->si_data.map_szl);
+	si->si_ofs.cydata_ofs = merge_bytes(si->si_data.cydata_ofsh,
+			si->si_data.cydata_ofsl);
+	si->si_ofs.test_ofs = merge_bytes(si->si_data.test_ofsh,
+			si->si_data.test_ofsl);
+	si->si_ofs.pcfg_ofs = merge_bytes(si->si_data.pcfg_ofsh,
+			si->si_data.pcfg_ofsl);
+	si->si_ofs.opcfg_ofs = merge_bytes(si->si_data.opcfg_ofsh,
+			si->si_data.opcfg_ofsl);
+	si->si_ofs.ddata_ofs = merge_bytes(si->si_data.ddata_ofsh,
+			si->si_data.ddata_ofsl);
+	si->si_ofs.mdata_ofs = merge_bytes(si->si_data.mdata_ofsh,
+			si->si_data.mdata_ofsl);
+	return rc;
+}
+
+static int cyttsp4_si_get_cydata(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	int read_offset;
+	int mfgid_sz, calc_mfgid_sz;
+	void *p;
+	int rc;
+
+	si->si_ofs.cydata_size = si->si_ofs.test_ofs - si->si_ofs.cydata_ofs;
+	dev_dbg(cd->dev, "%s: cydata size: %Zd\n", __func__,
+			si->si_ofs.cydata_size);
+
+	p = krealloc(si->si_ptrs.cydata, si->si_ofs.cydata_size, GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(cd->dev, "%s: fail alloc cydata memory\n", __func__);
+		return -ENOMEM;
+	}
+	si->si_ptrs.cydata = p;
+
+	read_offset = si->si_ofs.cydata_ofs;
+
+	/* Read the CYDA registers up to MFGID field */
+	rc = cyttsp4_adap_read(cd, read_offset,
+			offsetof(struct cyttsp4_cydata, mfgid_sz)
+				+ sizeof(si->si_ptrs.cydata->mfgid_sz),
+			si->si_ptrs.cydata);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read cydata r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	/* Check MFGID size */
+	mfgid_sz = si->si_ptrs.cydata->mfgid_sz;
+	calc_mfgid_sz = si->si_ofs.cydata_size - sizeof(struct cyttsp4_cydata);
+	if (mfgid_sz != calc_mfgid_sz) {
+		dev_err(cd->dev, "%s: mismatch in MFGID size, reported:%d calculated:%d\n",
+			__func__, mfgid_sz, calc_mfgid_sz);
+		return -EINVAL;
+	}
+
+	read_offset += offsetof(struct cyttsp4_cydata, mfgid_sz)
+			+ sizeof(si->si_ptrs.cydata->mfgid_sz);
+
+	/* Read the CYDA registers for MFGID field */
+	rc = cyttsp4_adap_read(cd, read_offset, si->si_ptrs.cydata->mfgid_sz,
+			si->si_ptrs.cydata->mfg_id);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read cydata r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	read_offset += si->si_ptrs.cydata->mfgid_sz;
+
+	/* Read the rest of the CYDA registers */
+	rc = cyttsp4_adap_read(cd, read_offset,
+			sizeof(struct cyttsp4_cydata)
+				- offsetof(struct cyttsp4_cydata, cyito_idh),
+			&si->si_ptrs.cydata->cyito_idh);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read cydata r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)si->si_ptrs.cydata,
+		si->si_ofs.cydata_size, "sysinfo_cydata");
+	return rc;
+}
+
+static int cyttsp4_si_get_test_data(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	void *p;
+	int rc;
+
+	si->si_ofs.test_size = si->si_ofs.pcfg_ofs - si->si_ofs.test_ofs;
+
+	p = krealloc(si->si_ptrs.test, si->si_ofs.test_size, GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(cd->dev, "%s: fail alloc test memory\n", __func__);
+		return -ENOMEM;
+	}
+	si->si_ptrs.test = p;
+
+	rc = cyttsp4_adap_read(cd, si->si_ofs.test_ofs, si->si_ofs.test_size,
+			si->si_ptrs.test);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read test data r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	cyttsp4_pr_buf(cd->dev, cd->pr_buf,
+		       (u8 *)si->si_ptrs.test, si->si_ofs.test_size,
+		       "sysinfo_test_data");
+	if (si->si_ptrs.test->post_codel &
+	    CY_POST_CODEL_WDG_RST)
+		dev_info(cd->dev, "%s: %s codel=%02X\n",
+			 __func__, "Reset was a WATCHDOG RESET",
+			 si->si_ptrs.test->post_codel);
+
+	if (!(si->si_ptrs.test->post_codel &
+	      CY_POST_CODEL_CFG_DATA_CRC_FAIL))
+		dev_info(cd->dev, "%s: %s codel=%02X\n", __func__,
+			 "Config Data CRC FAIL",
+			 si->si_ptrs.test->post_codel);
+
+	if (!(si->si_ptrs.test->post_codel &
+	      CY_POST_CODEL_PANEL_TEST_FAIL))
+		dev_info(cd->dev, "%s: %s codel=%02X\n",
+			 __func__, "PANEL TEST FAIL",
+			 si->si_ptrs.test->post_codel);
+
+	dev_info(cd->dev, "%s: SCANNING is %s codel=%02X\n",
+		 __func__, si->si_ptrs.test->post_codel & 0x08 ?
+		 "ENABLED" : "DISABLED",
+		 si->si_ptrs.test->post_codel);
+	return rc;
+}
+
+static int cyttsp4_si_get_pcfg_data(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	void *p;
+	int rc;
+
+	si->si_ofs.pcfg_size = si->si_ofs.opcfg_ofs - si->si_ofs.pcfg_ofs;
+
+	p = krealloc(si->si_ptrs.pcfg, si->si_ofs.pcfg_size, GFP_KERNEL);
+	if (p == NULL) {
+		rc = -ENOMEM;
+		dev_err(cd->dev, "%s: fail alloc pcfg memory r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+	si->si_ptrs.pcfg = p;
+
+	rc = cyttsp4_adap_read(cd, si->si_ofs.pcfg_ofs, si->si_ofs.pcfg_size,
+			si->si_ptrs.pcfg);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read pcfg data r=%d\n",
+			__func__, rc);
+		return rc;
+	}
+
+	si->si_ofs.max_x = merge_bytes((si->si_ptrs.pcfg->res_xh
+			& CY_PCFG_RESOLUTION_X_MASK), si->si_ptrs.pcfg->res_xl);
+	si->si_ofs.x_origin = !!(si->si_ptrs.pcfg->res_xh
+			& CY_PCFG_ORIGIN_X_MASK);
+	si->si_ofs.max_y = merge_bytes((si->si_ptrs.pcfg->res_yh
+			& CY_PCFG_RESOLUTION_Y_MASK), si->si_ptrs.pcfg->res_yl);
+	si->si_ofs.y_origin = !!(si->si_ptrs.pcfg->res_yh
+			& CY_PCFG_ORIGIN_Y_MASK);
+	si->si_ofs.max_p = merge_bytes(si->si_ptrs.pcfg->max_zh,
+			si->si_ptrs.pcfg->max_zl);
+
+	cyttsp4_pr_buf(cd->dev, cd->pr_buf,
+		       (u8 *)si->si_ptrs.pcfg,
+		       si->si_ofs.pcfg_size, "sysinfo_pcfg_data");
+	return rc;
+}
+
+static int cyttsp4_si_get_opcfg_data(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	struct cyttsp4_tch_abs_params *tch;
+	struct cyttsp4_tch_rec_params *tch_old, *tch_new;
+	enum cyttsp4_tch_abs abs;
+	int i;
+	void *p;
+	int rc;
+
+	si->si_ofs.opcfg_size = si->si_ofs.ddata_ofs - si->si_ofs.opcfg_ofs;
+
+	p = krealloc(si->si_ptrs.opcfg, si->si_ofs.opcfg_size, GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(cd->dev, "%s: fail alloc opcfg memory\n", __func__);
+		rc = -ENOMEM;
+		goto cyttsp4_si_get_opcfg_data_exit;
+	}
+	si->si_ptrs.opcfg = p;
+
+	rc = cyttsp4_adap_read(cd, si->si_ofs.opcfg_ofs, si->si_ofs.opcfg_size,
+			si->si_ptrs.opcfg);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail read opcfg data r=%d\n",
+			__func__, rc);
+		goto cyttsp4_si_get_opcfg_data_exit;
+	}
+	si->si_ofs.cmd_ofs = si->si_ptrs.opcfg->cmd_ofs;
+	si->si_ofs.rep_ofs = si->si_ptrs.opcfg->rep_ofs;
+	si->si_ofs.rep_sz = (si->si_ptrs.opcfg->rep_szh * 256) +
+		si->si_ptrs.opcfg->rep_szl;
+	si->si_ofs.num_btns = si->si_ptrs.opcfg->num_btns;
+	si->si_ofs.num_btn_regs = (si->si_ofs.num_btns +
+		CY_NUM_BTN_PER_REG - 1) / CY_NUM_BTN_PER_REG;
+	si->si_ofs.tt_stat_ofs = si->si_ptrs.opcfg->tt_stat_ofs;
+	si->si_ofs.obj_cfg0 = si->si_ptrs.opcfg->obj_cfg0;
+	si->si_ofs.max_tchs = si->si_ptrs.opcfg->max_tchs &
+		CY_BYTE_OFS_MASK;
+	si->si_ofs.tch_rec_size = si->si_ptrs.opcfg->tch_rec_size &
+		CY_BYTE_OFS_MASK;
+
+	/* Get the old touch fields */
+	for (abs = CY_TCH_X; abs < CY_NUM_TCH_FIELDS; abs++) {
+		tch = &si->si_ofs.tch_abs[abs];
+		tch_old = &si->si_ptrs.opcfg->tch_rec_old[abs];
+
+		tch->ofs = tch_old->loc & CY_BYTE_OFS_MASK;
+		tch->size = cyttsp4_bits_2_bytes(tch_old->size,
+						 &tch->max);
+		tch->bofs = (tch_old->loc & CY_BOFS_MASK) >> CY_BOFS_SHIFT;
+	}
+
+	/* button fields */
+	si->si_ofs.btn_rec_size = si->si_ptrs.opcfg->btn_rec_size;
+	si->si_ofs.btn_diff_ofs = si->si_ptrs.opcfg->btn_diff_ofs;
+	si->si_ofs.btn_diff_size = si->si_ptrs.opcfg->btn_diff_size;
+
+	if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE) {
+		/* Get the extended touch fields */
+		for (i = 0; i < CY_NUM_EXT_TCH_FIELDS; abs++, i++) {
+			tch = &si->si_ofs.tch_abs[abs];
+			tch_new = &si->si_ptrs.opcfg->tch_rec_new[i];
+
+			tch->ofs = tch_new->loc & CY_BYTE_OFS_MASK;
+			tch->size = cyttsp4_bits_2_bytes(tch_new->size,
+							 &tch->max);
+			tch->bofs = (tch_new->loc & CY_BOFS_MASK) >> CY_BOFS_SHIFT;
+		}
+	}
+
+	for (abs = 0; abs < CY_TCH_NUM_ABS; abs++) {
+		dev_dbg(cd->dev, "%s: tch_rec_%s\n", __func__,
+			cyttsp4_tch_abs_string[abs]);
+		dev_dbg(cd->dev, "%s:     ofs =%2Zd\n", __func__,
+			si->si_ofs.tch_abs[abs].ofs);
+		dev_dbg(cd->dev, "%s:     siz =%2Zd\n", __func__,
+			si->si_ofs.tch_abs[abs].size);
+		dev_dbg(cd->dev, "%s:     max =%2Zd\n", __func__,
+			si->si_ofs.tch_abs[abs].max);
+		dev_dbg(cd->dev, "%s:     bofs=%2Zd\n", __func__,
+			si->si_ofs.tch_abs[abs].bofs);
+	}
+
+	si->si_ofs.mode_size = si->si_ofs.tt_stat_ofs + 1;
+	si->si_ofs.data_size = si->si_ofs.max_tchs *
+		si->si_ptrs.opcfg->tch_rec_size;
+
+	cyttsp4_pr_buf(cd->dev, cd->pr_buf, (u8 *)si->si_ptrs.opcfg,
+		si->si_ofs.opcfg_size, "sysinfo_opcfg_data");
+
+cyttsp4_si_get_opcfg_data_exit:
+	return rc;
+}
+
+static int cyttsp4_si_get_ddata(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	void *p;
+	int rc;
+
+	si->si_ofs.ddata_size = si->si_ofs.mdata_ofs - si->si_ofs.ddata_ofs;
+
+	p = krealloc(si->si_ptrs.ddata, si->si_ofs.ddata_size, GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(cd->dev, "%s: fail alloc ddata memory\n", __func__);
+		return -ENOMEM;
+	}
+	si->si_ptrs.ddata = p;
+
+	rc = cyttsp4_adap_read(cd, si->si_ofs.ddata_ofs, si->si_ofs.ddata_size,
+			si->si_ptrs.ddata);
+	if (rc < 0)
+		dev_err(cd->dev, "%s: fail read ddata data r=%d\n",
+			__func__, rc);
+	else
+		cyttsp4_pr_buf(cd->dev, cd->pr_buf,
+			       (u8 *)si->si_ptrs.ddata,
+			       si->si_ofs.ddata_size, "sysinfo_ddata");
+	return rc;
+}
+
+static int cyttsp4_si_get_mdata(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	void *p;
+	int rc;
+
+	si->si_ofs.mdata_size = si->si_ofs.map_sz - si->si_ofs.mdata_ofs;
+
+	p = krealloc(si->si_ptrs.mdata, si->si_ofs.mdata_size, GFP_KERNEL);
+	if (p == NULL) {
+		dev_err(cd->dev, "%s: fail alloc mdata memory\n", __func__);
+		return -ENOMEM;
+	}
+	si->si_ptrs.mdata = p;
+
+	rc = cyttsp4_adap_read(cd, si->si_ofs.mdata_ofs, si->si_ofs.mdata_size,
+			si->si_ptrs.mdata);
+	if (rc < 0)
+		dev_err(cd->dev, "%s: fail read mdata data r=%d\n",
+			__func__, rc);
+	else
+		cyttsp4_pr_buf(cd->dev, cd->pr_buf,
+			       (u8 *)si->si_ptrs.mdata,
+			       si->si_ofs.mdata_size, "sysinfo_mdata");
+	return rc;
+}
+
+static int cyttsp4_si_get_btn_data(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	int btn;
+	int num_defined_keys;
+	u16 *key_table;
+	void *p;
+	int rc = 0;
+
+	if (si->si_ofs.num_btns) {
+		si->si_ofs.btn_keys_size = si->si_ofs.num_btns *
+			sizeof(struct cyttsp4_btn);
+
+		p = krealloc(si->btn, si->si_ofs.btn_keys_size,
+				GFP_KERNEL|__GFP_ZERO);
+		if (p == NULL) {
+			dev_err(cd->dev, "%s: %s\n", __func__,
+				"fail alloc btn_keys memory");
+			return -ENOMEM;
+		}
+		si->btn = p;
+
+		if (cd->cpdata->sett[CY_IC_GRPNUM_BTN_KEYS] == NULL)
+			num_defined_keys = 0;
+		else if (cd->cpdata->sett[CY_IC_GRPNUM_BTN_KEYS]->data == NULL)
+			num_defined_keys = 0;
+		else
+			num_defined_keys = cd->cpdata->sett
+				[CY_IC_GRPNUM_BTN_KEYS]->size;
+
+		for (btn = 0; btn < si->si_ofs.num_btns &&
+			btn < num_defined_keys; btn++) {
+			key_table = (u16 *)cd->cpdata->sett
+				[CY_IC_GRPNUM_BTN_KEYS]->data;
+			si->btn[btn].key_code = key_table[btn];
+			si->btn[btn].state = CY_BTN_RELEASED;
+			si->btn[btn].enabled = true;
+		}
+		for (; btn < si->si_ofs.num_btns; btn++) {
+			si->btn[btn].key_code = KEY_RESERVED;
+			si->btn[btn].state = CY_BTN_RELEASED;
+			si->btn[btn].enabled = true;
+		}
+
+		return rc;
+	}
+
+	si->si_ofs.btn_keys_size = 0;
+	kfree(si->btn);
+	si->btn = NULL;
+	return rc;
+}
+
+static int cyttsp4_si_get_op_data_ptrs(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	void *p;
+
+	p = krealloc(si->xy_mode, si->si_ofs.mode_size, GFP_KERNEL|__GFP_ZERO);
+	if (p == NULL)
+		return -ENOMEM;
+	si->xy_mode = p;
+
+	p = krealloc(si->xy_data, si->si_ofs.data_size, GFP_KERNEL|__GFP_ZERO);
+	if (p == NULL)
+		return -ENOMEM;
+	si->xy_data = p;
+
+	p = krealloc(si->btn_rec_data,
+			si->si_ofs.btn_rec_size * si->si_ofs.num_btns,
+			GFP_KERNEL|__GFP_ZERO);
+	if (p == NULL)
+		return -ENOMEM;
+	si->btn_rec_data = p;
+
+	return 0;
+}
+
+static void cyttsp4_si_put_log_data(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	dev_dbg(cd->dev, "%s: cydata_ofs =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.cydata_ofs, si->si_ofs.cydata_size);
+	dev_dbg(cd->dev, "%s: test_ofs   =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.test_ofs, si->si_ofs.test_size);
+	dev_dbg(cd->dev, "%s: pcfg_ofs   =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.pcfg_ofs, si->si_ofs.pcfg_size);
+	dev_dbg(cd->dev, "%s: opcfg_ofs  =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.opcfg_ofs, si->si_ofs.opcfg_size);
+	dev_dbg(cd->dev, "%s: ddata_ofs  =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.ddata_ofs, si->si_ofs.ddata_size);
+	dev_dbg(cd->dev, "%s: mdata_ofs  =%4Zd siz=%4Zd\n", __func__,
+		si->si_ofs.mdata_ofs, si->si_ofs.mdata_size);
+
+	dev_dbg(cd->dev, "%s: cmd_ofs       =%4Zd\n", __func__,
+		si->si_ofs.cmd_ofs);
+	dev_dbg(cd->dev, "%s: rep_ofs       =%4Zd\n", __func__,
+		si->si_ofs.rep_ofs);
+	dev_dbg(cd->dev, "%s: rep_sz        =%4Zd\n", __func__,
+		si->si_ofs.rep_sz);
+	dev_dbg(cd->dev, "%s: num_btns      =%4Zd\n", __func__,
+		si->si_ofs.num_btns);
+	dev_dbg(cd->dev, "%s: num_btn_regs  =%4Zd\n", __func__,
+		si->si_ofs.num_btn_regs);
+	dev_dbg(cd->dev, "%s: tt_stat_ofs   =%4Zd\n", __func__,
+		si->si_ofs.tt_stat_ofs);
+	dev_dbg(cd->dev, "%s: tch_rec_size  =%4Zd\n", __func__,
+		si->si_ofs.tch_rec_size);
+	dev_dbg(cd->dev, "%s: max_tchs      =%4Zd\n", __func__,
+		si->si_ofs.max_tchs);
+	dev_dbg(cd->dev, "%s: mode_size     =%4Zd\n", __func__,
+		si->si_ofs.mode_size);
+	dev_dbg(cd->dev, "%s: data_size     =%4Zd\n", __func__,
+		si->si_ofs.data_size);
+	dev_dbg(cd->dev, "%s: map_sz        =%4Zd\n", __func__,
+		si->si_ofs.map_sz);
+
+	dev_dbg(cd->dev, "%s: btn_rec_size   =%2Zd\n", __func__,
+		si->si_ofs.btn_rec_size);
+	dev_dbg(cd->dev, "%s: btn_diff_ofs   =%2Zd\n", __func__,
+		si->si_ofs.btn_diff_ofs);
+	dev_dbg(cd->dev, "%s: btn_diff_size  =%2Zd\n", __func__,
+		si->si_ofs.btn_diff_size);
+
+	dev_dbg(cd->dev, "%s: max_x    = 0x%04ZX (%Zd)\n", __func__,
+		si->si_ofs.max_x, si->si_ofs.max_x);
+	dev_dbg(cd->dev, "%s: x_origin = %Zd (%s)\n", __func__,
+		si->si_ofs.x_origin,
+		si->si_ofs.x_origin == CY_NORMAL_ORIGIN ?
+		"left corner" : "right corner");
+	dev_dbg(cd->dev, "%s: max_y    = 0x%04ZX (%Zd)\n", __func__,
+		si->si_ofs.max_y, si->si_ofs.max_y);
+	dev_dbg(cd->dev, "%s: y_origin = %Zd (%s)\n", __func__,
+		si->si_ofs.y_origin,
+		si->si_ofs.y_origin == CY_NORMAL_ORIGIN ?
+		"upper corner" : "lower corner");
+	dev_dbg(cd->dev, "%s: max_p    = 0x%04ZX (%Zd)\n", __func__,
+		si->si_ofs.max_p, si->si_ofs.max_p);
+
+	dev_dbg(cd->dev, "%s: xy_mode=%p xy_data=%p\n", __func__,
+		si->xy_mode, si->xy_data);
+}
+
+static int cyttsp4_get_sysinfo_regs(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+	int rc;
+
+	rc = cyttsp4_si_data_offsets(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_cydata(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_test_data(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_pcfg_data(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_opcfg_data(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_ddata(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_mdata(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_btn_data(cd);
+	if (rc < 0)
+		return rc;
+
+	rc = cyttsp4_si_get_op_data_ptrs(cd);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: failed to get_op_data\n",
+			__func__);
+		return rc;
+	}
+
+	cyttsp4_si_put_log_data(cd);
+
+	/* provide flow control handshake */
+	rc = cyttsp4_handshake(cd, si->si_data.hst_mode);
+	if (rc < 0)
+		dev_err(cd->dev, "%s: handshake fail on sysinfo reg\n",
+			__func__);
+
+	si->ready = true;
+	return rc;
+}
+
+static void cyttsp4_queue_startup_(struct cyttsp4 *cd)
+{
+	if (cd->startup_state == STARTUP_NONE) {
+		cd->startup_state = STARTUP_QUEUED;
+		schedule_work(&cd->startup_work);
+		dev_dbg(cd->dev, "%s: cyttsp4_startup queued\n", __func__);
+	} else {
+		dev_dbg(cd->dev, "%s: startup_state = %d\n", __func__,
+			cd->startup_state);
+	}
+}
+
+static void cyttsp4_report_slot_liftoff(struct cyttsp4_mt_data *md,
+		int max_slots)
+{
+	int t;
+
+	if (md->num_prv_tch == 0)
+		return;
+
+	for (t = 0; t < max_slots; t++) {
+		input_mt_slot(md->input, t);
+		input_mt_report_slot_state(md->input,
+			MT_TOOL_FINGER, false);
+	}
+}
+
+static void cyttsp4_lift_all(struct cyttsp4_mt_data *md)
+{
+	if (!md->si)
+		return;
+
+	if (md->num_prv_tch != 0) {
+		cyttsp4_report_slot_liftoff(md,
+				md->si->si_ofs.tch_abs[CY_TCH_T].max);
+		input_sync(md->input);
+		md->num_prv_tch = 0;
+	}
+}
+
+static void cyttsp4_get_touch_axis(struct cyttsp4_mt_data *md,
+	int *axis, int size, int max, u8 *xy_data, int bofs)
+{
+	int nbyte;
+	int next;
+
+	for (nbyte = 0, *axis = 0, next = 0; nbyte < size; nbyte++) {
+		dev_vdbg(&md->input->dev,
+			"%s: *axis=%02X(%d) size=%d max=%08X xy_data=%p"
+			" xy_data[%d]=%02X(%d) bofs=%d\n",
+			__func__, *axis, *axis, size, max, xy_data, next,
+			xy_data[next], xy_data[next], bofs);
+		*axis = (*axis * 256) + (xy_data[next] >> bofs);
+		next++;
+	}
+
+	*axis &= max - 1;
+
+	dev_vdbg(&md->input->dev,
+		"%s: *axis=%02X(%d) size=%d max=%08X xy_data=%p"
+		" xy_data[%d]=%02X(%d)\n",
+		__func__, *axis, *axis, size, max, xy_data, next,
+		xy_data[next], xy_data[next]);
+}
+
+static void cyttsp4_get_touch(struct cyttsp4_mt_data *md,
+	struct cyttsp4_touch *touch, u8 *xy_data)
+{
+	struct device *dev = &md->input->dev;
+	struct cyttsp4_sysinfo *si = md->si;
+	enum cyttsp4_tch_abs abs;
+	bool flipped;
+
+	for (abs = CY_TCH_X; abs < CY_TCH_NUM_ABS; abs++) {
+		cyttsp4_get_touch_axis(md, &touch->abs[abs],
+			si->si_ofs.tch_abs[abs].size,
+			si->si_ofs.tch_abs[abs].max,
+			xy_data + si->si_ofs.tch_abs[abs].ofs,
+			si->si_ofs.tch_abs[abs].bofs);
+		dev_vdbg(dev, "%s: get %s=%04X(%d)\n", __func__,
+			cyttsp4_tch_abs_string[abs],
+			touch->abs[abs], touch->abs[abs]);
+	}
+
+	if (md->pdata->flags & CY_FLAG_FLIP) {
+		swap(touch->abs[CY_TCH_X], touch->abs[CY_TCH_Y]);
+		flipped = true;
+	} else
+		flipped = false;
+
+	if (md->pdata->flags & CY_FLAG_INV_X) {
+		if (flipped)
+			touch->abs[CY_TCH_X] = md->si->si_ofs.max_y -
+				touch->abs[CY_TCH_X];
+		else
+			touch->abs[CY_TCH_X] = md->si->si_ofs.max_x -
+				touch->abs[CY_TCH_X];
+	}
+	if (md->pdata->flags & CY_FLAG_INV_Y) {
+		if (flipped)
+			touch->abs[CY_TCH_Y] = md->si->si_ofs.max_x -
+				touch->abs[CY_TCH_Y];
+		else
+			touch->abs[CY_TCH_Y] = md->si->si_ofs.max_y -
+				touch->abs[CY_TCH_Y];
+	}
+
+	dev_vdbg(dev, "%s: flip=%s inv-x=%s inv-y=%s x=%04X(%d) y=%04X(%d)\n",
+		__func__, flipped ? "true" : "false",
+		md->pdata->flags & CY_FLAG_INV_X ? "true" : "false",
+		md->pdata->flags & CY_FLAG_INV_Y ? "true" : "false",
+		touch->abs[CY_TCH_X], touch->abs[CY_TCH_X],
+		touch->abs[CY_TCH_Y], touch->abs[CY_TCH_Y]);
+}
+
+static void cyttsp4_final_sync(struct input_dev *input, int max_slots, int *ids)
+{
+	int t;
+
+	for (t = 0; t < max_slots; t++) {
+		if (ids[t])
+			continue;
+		input_mt_slot(input, t);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+	}
+
+	input_sync(input);
+}
+
+static void cyttsp4_get_mt_touches(struct cyttsp4_mt_data *md, int num_cur_tch)
+{
+	struct device *dev = &md->input->dev;
+	struct cyttsp4_sysinfo *si = md->si;
+	struct cyttsp4_touch tch;
+	int sig;
+	int i, j, t = 0;
+	int ids[max(CY_TMA1036_MAX_TCH, CY_TMA4XX_MAX_TCH)];
+
+	memset(ids, 0, si->si_ofs.tch_abs[CY_TCH_T].max * sizeof(int));
+	for (i = 0; i < num_cur_tch; i++) {
+		cyttsp4_get_touch(md, &tch, si->xy_data +
+			(i * si->si_ofs.tch_rec_size));
+		if ((tch.abs[CY_TCH_T] < md->pdata->frmwrk->abs
+			[(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MIN_OST]) ||
+			(tch.abs[CY_TCH_T] > md->pdata->frmwrk->abs
+			[(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MAX_OST])) {
+			dev_err(dev, "%s: tch=%d -> bad trk_id=%d max_id=%d\n",
+				__func__, i, tch.abs[CY_TCH_T],
+				md->pdata->frmwrk->abs[(CY_ABS_ID_OST *
+				CY_NUM_ABS_SET) + CY_MAX_OST]);
+			continue;
+		}
+
+		/* use 0 based track id's */
+		sig = md->pdata->frmwrk->abs
+			[(CY_ABS_ID_OST * CY_NUM_ABS_SET) + 0];
+		if (sig != CY_IGNORE_VALUE) {
+			t = tch.abs[CY_TCH_T] - md->pdata->frmwrk->abs
+				[(CY_ABS_ID_OST * CY_NUM_ABS_SET) + CY_MIN_OST];
+			if (tch.abs[CY_TCH_E] == CY_EV_LIFTOFF) {
+				dev_dbg(dev, "%s: t=%d e=%d lift-off\n",
+					__func__, t, tch.abs[CY_TCH_E]);
+				goto cyttsp4_get_mt_touches_pr_tch;
+			}
+			input_mt_slot(md->input, t);
+			input_mt_report_slot_state(md->input, MT_TOOL_FINGER,
+					true);
+			ids[t] = true;
+		}
+
+		/* all devices: position and pressure fields */
+		for (j = 0; j <= CY_ABS_W_OST; j++) {
+			sig = md->pdata->frmwrk->abs[((CY_ABS_X_OST + j) *
+				CY_NUM_ABS_SET) + 0];
+			if (sig != CY_IGNORE_VALUE)
+				input_report_abs(md->input, sig,
+					tch.abs[CY_TCH_X + j]);
+		}
+		if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE) {
+			/*
+			 * TMA400 size and orientation fields:
+			 * if pressure is non-zero and major touch
+			 * signal is zero, then set major and minor touch
+			 * signals to minimum non-zero value
+			 */
+			if (tch.abs[CY_TCH_P] > 0 && tch.abs[CY_TCH_MAJ] == 0)
+				tch.abs[CY_TCH_MAJ] = tch.abs[CY_TCH_MIN] = 1;
+
+			/* Get the extended touch fields */
+			for (j = 0; j < CY_NUM_EXT_TCH_FIELDS; j++) {
+				sig = md->pdata->frmwrk->abs
+					[((CY_ABS_MAJ_OST + j) *
+					CY_NUM_ABS_SET) + 0];
+				if (sig != CY_IGNORE_VALUE)
+					input_report_abs(md->input, sig,
+						tch.abs[CY_TCH_MAJ + j]);
+			}
+		}
+
+cyttsp4_get_mt_touches_pr_tch:
+		if (si->si_ofs.tch_rec_size > CY_TMA1036_TCH_REC_SIZE)
+			dev_dbg(dev,
+				"%s: t=%d x=%d y=%d z=%d M=%d m=%d o=%d e=%d\n",
+				__func__, t,
+				tch.abs[CY_TCH_X],
+				tch.abs[CY_TCH_Y],
+				tch.abs[CY_TCH_P],
+				tch.abs[CY_TCH_MAJ],
+				tch.abs[CY_TCH_MIN],
+				tch.abs[CY_TCH_OR],
+				tch.abs[CY_TCH_E]);
+		else
+			dev_dbg(dev,
+				"%s: t=%d x=%d y=%d z=%d e=%d\n", __func__,
+				t,
+				tch.abs[CY_TCH_X],
+				tch.abs[CY_TCH_Y],
+				tch.abs[CY_TCH_P],
+				tch.abs[CY_TCH_E]);
+	}
+
+	cyttsp4_final_sync(md->input, si->si_ofs.tch_abs[CY_TCH_T].max, ids);
+
+	md->num_prv_tch = num_cur_tch;
+
+	return;
+}
+
+/* read xy_data for all current touches */
+static int cyttsp4_xy_worker(struct cyttsp4 *cd)
+{
+	struct cyttsp4_mt_data *md = &cd->md;
+	struct device *dev = &md->input->dev;
+	struct cyttsp4_sysinfo *si = md->si;
+	u8 num_cur_tch;
+	u8 hst_mode;
+	u8 rep_len;
+	u8 rep_stat;
+	u8 tt_stat;
+	int rc = 0;
+
+	/*
+	 * Get event data from cyttsp4 device.
+	 * The event data includes all data
+	 * for all active touches.
+	 * Event data also includes button data
+	 */
+	/*
+	 * Use 2 reads:
+	 * 1st read to get mode + button bytes + touch count (core)
+	 * 2nd read (optional) to get touch 1 - touch n data
+	 */
+	hst_mode = si->xy_mode[CY_REG_BASE];
+	rep_len = si->xy_mode[si->si_ofs.rep_ofs];
+	rep_stat = si->xy_mode[si->si_ofs.rep_ofs + 1];
+	tt_stat = si->xy_mode[si->si_ofs.tt_stat_ofs];
+	dev_vdbg(dev, "%s: %s%02X %s%d %s%02X %s%02X\n", __func__,
+		"hst_mode=", hst_mode, "rep_len=", rep_len,
+		"rep_stat=", rep_stat, "tt_stat=", tt_stat);
+
+	num_cur_tch = GET_NUM_TOUCHES(tt_stat);
+	dev_vdbg(dev, "%s: num_cur_tch=%d\n", __func__, num_cur_tch);
+
+	if (rep_len == 0 && num_cur_tch > 0) {
+		dev_err(dev, "%s: report length error rep_len=%d num_tch=%d\n",
+			__func__, rep_len, num_cur_tch);
+		goto cyttsp4_xy_worker_exit;
+	}
+
+	/* read touches */
+	if (num_cur_tch > 0) {
+		rc = cyttsp4_adap_read(cd, si->si_ofs.tt_stat_ofs + 1,
+				num_cur_tch * si->si_ofs.tch_rec_size,
+				si->xy_data);
+		if (rc < 0) {
+			dev_err(dev, "%s: read fail on touch regs r=%d\n",
+				__func__, rc);
+			goto cyttsp4_xy_worker_exit;
+		}
+	}
+
+	/* print xy data */
+	cyttsp4_pr_buf(dev, cd->pr_buf, si->xy_data, num_cur_tch *
+		si->si_ofs.tch_rec_size, "xy_data");
+
+	/* check any error conditions */
+	if (IS_BAD_PKT(rep_stat)) {
+		dev_dbg(dev, "%s: Invalid buffer detected\n", __func__);
+		rc = 0;
+		goto cyttsp4_xy_worker_exit;
+	}
+
+	if (IS_LARGE_AREA(tt_stat))
+		dev_dbg(dev, "%s: Large area detected\n", __func__);
+
+	if (num_cur_tch > si->si_ofs.max_tchs) {
+		dev_err(dev, "%s: too many tch; set to max tch (n=%d c=%Zd)\n",
+				__func__, num_cur_tch, si->si_ofs.max_tchs);
+		num_cur_tch = si->si_ofs.max_tchs;
+	}
+
+	/* extract xy_data for all currently reported touches */
+	dev_vdbg(dev, "%s: extract data num_cur_tch=%d\n", __func__,
+		num_cur_tch);
+	if (num_cur_tch)
+		cyttsp4_get_mt_touches(md, num_cur_tch);
+	else
+		cyttsp4_lift_all(md);
+
+	rc = 0;
+
+cyttsp4_xy_worker_exit:
+	return rc;
+}
+
+static int cyttsp4_mt_attention(struct cyttsp4 *cd)
+{
+	struct device *dev = cd->dev;
+	struct cyttsp4_mt_data *md = &cd->md;
+	int rc = 0;
+
+	if (!md->si)
+		return 0;
+
+	mutex_lock(&md->report_lock);
+	if (!md->is_suspended) {
+		/* core handles handshake */
+		rc = cyttsp4_xy_worker(cd);
+	} else {
+		dev_vdbg(dev, "%s: Ignoring report while suspended\n",
+			__func__);
+	}
+	mutex_unlock(&md->report_lock);
+	if (rc < 0)
+		dev_err(dev, "%s: xy_worker error r=%d\n", __func__, rc);
+
+	return rc;
+}
+
+static irqreturn_t cyttsp4_irq(int irq, void *handle)
+{
+	struct cyttsp4 *cd = handle;
+	struct device *dev = cd->dev;
+	enum cyttsp4_mode cur_mode;
+	u8 cmd_ofs = cd->sysinfo.si_ofs.cmd_ofs;
+	u8 mode[3];
+	int rc;
+
+	/*
+	 * Check whether this IRQ should be ignored (external)
+	 * This should be the very first thing to check since
+	 * ignore_irq may be set for a very short period of time
+	 */
+	if (atomic_read(&cd->ignore_irq)) {
+		dev_vdbg(dev, "%s: Ignoring IRQ\n", __func__);
+		return IRQ_HANDLED;
+	}
+
+	dev_dbg(dev, "%s int:0x%x\n", __func__, cd->int_status);
+
+	mutex_lock(&cd->system_lock);
+
+	/* Just to debug */
+	if (cd->sleep_state == SS_SLEEP_ON || cd->sleep_state == SS_SLEEPING)
+		dev_vdbg(dev, "%s: Received IRQ while in sleep\n", __func__);
+
+	rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), mode);
+	if (rc) {
+		dev_err(cd->dev, "%s: Fail read adapter r=%d\n", __func__, rc);
+		goto cyttsp4_irq_exit;
+	}
+	dev_vdbg(dev, "%s mode[0-2]:0x%X 0x%X 0x%X\n", __func__,
+			mode[0], mode[1], mode[2]);
+
+	if (IS_BOOTLOADER(mode[0], mode[1])) {
+		cur_mode = CY_MODE_BOOTLOADER;
+		dev_vdbg(dev, "%s: bl running\n", __func__);
+		if (cd->mode == CY_MODE_BOOTLOADER) {
+			/* Signal bootloader heartbeat heard */
+			wake_up(&cd->wait_q);
+			goto cyttsp4_irq_exit;
+		}
+
+		/* switch to bootloader */
+		dev_dbg(dev, "%s: restart switch to bl m=%d -> m=%d\n",
+			__func__, cd->mode, cur_mode);
+
+		/* catch operation->bl glitch */
+		if (cd->mode != CY_MODE_UNKNOWN) {
+			/* Incase startup_state do not let startup_() */
+			cd->mode = CY_MODE_UNKNOWN;
+			cyttsp4_queue_startup_(cd);
+			goto cyttsp4_irq_exit;
+		}
+
+		/*
+		 * do not wake thread on this switch since
+		 * it is possible to get an early heartbeat
+		 * prior to performing the reset
+		 */
+		cd->mode = cur_mode;
+
+		goto cyttsp4_irq_exit;
+	}
+
+	switch (mode[0] & CY_HST_MODE) {
+	case CY_HST_OPERATE:
+		cur_mode = CY_MODE_OPERATIONAL;
+		dev_vdbg(dev, "%s: operational\n", __func__);
+		break;
+	case CY_HST_CAT:
+		cur_mode = CY_MODE_CAT;
+		dev_vdbg(dev, "%s: CaT\n", __func__);
+		break;
+	case CY_HST_SYSINFO:
+		cur_mode = CY_MODE_SYSINFO;
+		dev_vdbg(dev, "%s: sysinfo\n", __func__);
+		break;
+	default:
+		cur_mode = CY_MODE_UNKNOWN;
+		dev_err(dev, "%s: unknown HST mode 0x%02X\n", __func__,
+			mode[0]);
+		break;
+	}
+
+	/* Check whether this IRQ should be ignored (internal) */
+	if (cd->int_status & CY_INT_IGNORE) {
+		dev_vdbg(dev, "%s: Ignoring IRQ\n", __func__);
+		goto cyttsp4_irq_exit;
+	}
+
+	/* Check for wake up interrupt */
+	if (cd->int_status & CY_INT_AWAKE) {
+		cd->int_status &= ~CY_INT_AWAKE;
+		wake_up(&cd->wait_q);
+		dev_vdbg(dev, "%s: Received wake up interrupt\n", __func__);
+		goto cyttsp4_irq_handshake;
+	}
+
+	/* Expecting mode change interrupt */
+	if ((cd->int_status & CY_INT_MODE_CHANGE)
+			&& (mode[0] & CY_HST_MODE_CHANGE) == 0) {
+		cd->int_status &= ~CY_INT_MODE_CHANGE;
+		dev_dbg(dev, "%s: finish mode switch m=%d -> m=%d\n",
+				__func__, cd->mode, cur_mode);
+		cd->mode = cur_mode;
+		wake_up(&cd->wait_q);
+		goto cyttsp4_irq_handshake;
+	}
+
+	/* compare current core mode to current device mode */
+	dev_vdbg(dev, "%s: cd->mode=%d cur_mode=%d\n",
+			__func__, cd->mode, cur_mode);
+	if ((mode[0] & CY_HST_MODE_CHANGE) == 0 && cd->mode != cur_mode) {
+		/* Unexpected mode change occurred */
+		dev_err(dev, "%s %d->%d 0x%x\n", __func__, cd->mode,
+				cur_mode, cd->int_status);
+		dev_dbg(dev, "%s: Unexpected mode change, startup\n",
+				__func__);
+		cyttsp4_queue_startup_(cd);
+		goto cyttsp4_irq_exit;
+	}
+
+	/* Expecting command complete interrupt */
+	dev_vdbg(dev, "%s: command byte:0x%x\n", __func__, mode[cmd_ofs]);
+	if ((cd->int_status & CY_INT_EXEC_CMD)
+			&& mode[cmd_ofs] & CY_CMD_COMPLETE) {
+		cd->int_status &= ~CY_INT_EXEC_CMD;
+		dev_vdbg(dev, "%s: Received command complete interrupt\n",
+				__func__);
+		wake_up(&cd->wait_q);
+		/*
+		 * It is possible to receive a single interrupt for
+		 * command complete and touch/button status report.
+		 * Continue processing for a possible status report.
+		 */
+	}
+
+	/* This should be status report, read status regs */
+	if (cd->mode == CY_MODE_OPERATIONAL) {
+		dev_vdbg(dev, "%s: Read status registers\n", __func__);
+		rc = cyttsp4_load_status_regs(cd);
+		if (rc < 0)
+			dev_err(dev, "%s: fail read mode regs r=%d\n",
+				__func__, rc);
+	}
+
+	cyttsp4_mt_attention(cd);
+
+cyttsp4_irq_handshake:
+	/* handshake the event */
+	dev_vdbg(dev, "%s: Handshake mode=0x%02X r=%d\n",
+			__func__, mode[0], rc);
+	rc = cyttsp4_handshake(cd, mode[0]);
+	if (rc < 0)
+		dev_err(dev, "%s: Fail handshake mode=0x%02X r=%d\n",
+				__func__, mode[0], rc);
+
+	/*
+	 * a non-zero udelay period is required for using
+	 * IRQF_TRIGGER_LOW in order to delay until the
+	 * device completes isr deassert
+	 */
+	udelay(cd->cpdata->level_irq_udelay);
+
+cyttsp4_irq_exit:
+	mutex_unlock(&cd->system_lock);
+	return IRQ_HANDLED;
+}
+
+static void cyttsp4_start_wd_timer(struct cyttsp4 *cd)
+{
+	if (!CY_WATCHDOG_TIMEOUT)
+		return;
+
+	mod_timer(&cd->watchdog_timer, jiffies +
+			msecs_to_jiffies(CY_WATCHDOG_TIMEOUT));
+}
+
+static void cyttsp4_stop_wd_timer(struct cyttsp4 *cd)
+{
+	if (!CY_WATCHDOG_TIMEOUT)
+		return;
+
+	/*
+	 * Ensure we wait until the watchdog timer
+	 * running on a different CPU finishes
+	 */
+	del_timer_sync(&cd->watchdog_timer);
+	cancel_work_sync(&cd->watchdog_work);
+	del_timer_sync(&cd->watchdog_timer);
+}
+
+static void cyttsp4_watchdog_timer(unsigned long handle)
+{
+	struct cyttsp4 *cd = (struct cyttsp4 *)handle;
+
+	dev_vdbg(cd->dev, "%s: Watchdog timer triggered\n", __func__);
+
+	schedule_work(&cd->watchdog_work);
+
+	return;
+}
+
+static int cyttsp4_request_exclusive(struct cyttsp4 *cd, void *ownptr,
+		int timeout_ms)
+{
+	int t = msecs_to_jiffies(timeout_ms);
+	bool with_timeout = (timeout_ms != 0);
+
+	mutex_lock(&cd->system_lock);
+	if (!cd->exclusive_dev && cd->exclusive_waits == 0) {
+		cd->exclusive_dev = ownptr;
+		goto exit;
+	}
+
+	cd->exclusive_waits++;
+wait:
+	mutex_unlock(&cd->system_lock);
+	if (with_timeout) {
+		t = wait_event_timeout(cd->wait_q, !cd->exclusive_dev, t);
+		if (IS_TMO(t)) {
+			dev_err(cd->dev, "%s: tmo waiting exclusive access\n",
+				__func__);
+			mutex_lock(&cd->system_lock);
+			cd->exclusive_waits--;
+			mutex_unlock(&cd->system_lock);
+			return -ETIME;
+		}
+	} else {
+		wait_event(cd->wait_q, !cd->exclusive_dev);
+	}
+	mutex_lock(&cd->system_lock);
+	if (cd->exclusive_dev)
+		goto wait;
+	cd->exclusive_dev = ownptr;
+	cd->exclusive_waits--;
+exit:
+	mutex_unlock(&cd->system_lock);
+
+	return 0;
+}
+
+/*
+ * returns error if was not owned
+ */
+static int cyttsp4_release_exclusive(struct cyttsp4 *cd, void *ownptr)
+{
+	mutex_lock(&cd->system_lock);
+	if (cd->exclusive_dev != ownptr) {
+		mutex_unlock(&cd->system_lock);
+		return -EINVAL;
+	}
+
+	dev_vdbg(cd->dev, "%s: exclusive_dev %p freed\n",
+		__func__, cd->exclusive_dev);
+	cd->exclusive_dev = NULL;
+	wake_up(&cd->wait_q);
+	mutex_unlock(&cd->system_lock);
+	return 0;
+}
+
+static int cyttsp4_wait_bl_heartbeat(struct cyttsp4 *cd)
+{
+	long t;
+	int rc = 0;
+
+	/* wait heartbeat */
+	dev_vdbg(cd->dev, "%s: wait heartbeat...\n", __func__);
+	t = wait_event_timeout(cd->wait_q, cd->mode == CY_MODE_BOOTLOADER,
+			msecs_to_jiffies(CY_CORE_RESET_AND_WAIT_TIMEOUT));
+	if (IS_TMO(t)) {
+		dev_err(cd->dev, "%s: tmo waiting bl heartbeat cd->mode=%d\n",
+			__func__, cd->mode);
+		rc = -ETIME;
+	}
+
+	return rc;
+}
+
+static int cyttsp4_wait_sysinfo_mode(struct cyttsp4 *cd)
+{
+	long t;
+
+	dev_vdbg(cd->dev, "%s: wait sysinfo...\n", __func__);
+
+	t = wait_event_timeout(cd->wait_q, cd->mode == CY_MODE_SYSINFO,
+			msecs_to_jiffies(CY_CORE_MODE_CHANGE_TIMEOUT));
+	if (IS_TMO(t)) {
+		dev_err(cd->dev, "%s: tmo waiting exit bl cd->mode=%d\n",
+			__func__, cd->mode);
+		mutex_lock(&cd->system_lock);
+		cd->int_status &= ~CY_INT_MODE_CHANGE;
+		mutex_unlock(&cd->system_lock);
+		return -ETIME;
+	}
+
+	return 0;
+}
+
+static int cyttsp4_reset_and_wait(struct cyttsp4 *cd)
+{
+	int rc;
+
+	/* reset hardware */
+	mutex_lock(&cd->system_lock);
+	dev_dbg(cd->dev, "%s: reset hw...\n", __func__);
+	rc = cyttsp4_hw_reset(cd);
+	cd->mode = CY_MODE_UNKNOWN;
+	mutex_unlock(&cd->system_lock);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s:Fail hw reset r=%d\n", __func__, rc);
+		return rc;
+	}
+
+	return cyttsp4_wait_bl_heartbeat(cd);
+}
+
+/*
+ * returns err if refused or timeout; block until mode change complete
+ * bit is set (mode change interrupt)
+ */
+static int cyttsp4_set_mode(struct cyttsp4 *cd, int new_mode)
+{
+	u8 new_dev_mode;
+	u8 mode;
+	long t;
+	int rc;
+
+	switch (new_mode) {
+	case CY_MODE_OPERATIONAL:
+		new_dev_mode = CY_HST_OPERATE;
+		break;
+	case CY_MODE_SYSINFO:
+		new_dev_mode = CY_HST_SYSINFO;
+		break;
+	case CY_MODE_CAT:
+		new_dev_mode = CY_HST_CAT;
+		break;
+	default:
+		dev_err(cd->dev, "%s: invalid mode: %02X(%d)\n",
+			__func__, new_mode, new_mode);
+		return -EINVAL;
+	}
+
+	/* change mode */
+	dev_dbg(cd->dev, "%s: %s=%p new_dev_mode=%02X new_mode=%d\n",
+			__func__, "have exclusive", cd->exclusive_dev,
+			new_dev_mode, new_mode);
+
+	mutex_lock(&cd->system_lock);
+	rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode);
+	if (rc < 0) {
+		mutex_unlock(&cd->system_lock);
+		dev_err(cd->dev, "%s: Fail read mode r=%d\n",
+			__func__, rc);
+		goto exit;
+	}
+
+	/* Clear device mode bits and set to new mode */
+	mode &= ~CY_HST_MODE;
+	mode |= new_dev_mode | CY_HST_MODE_CHANGE;
+
+	cd->int_status |= CY_INT_MODE_CHANGE;
+	rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(mode), &mode);
+	mutex_unlock(&cd->system_lock);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: Fail write mode change r=%d\n",
+				__func__, rc);
+		goto exit;
+	}
+
+	/* wait for mode change done interrupt */
+	t = wait_event_timeout(cd->wait_q,
+			(cd->int_status & CY_INT_MODE_CHANGE) == 0,
+			msecs_to_jiffies(CY_CORE_MODE_CHANGE_TIMEOUT));
+	dev_dbg(cd->dev, "%s: back from wait t=%ld cd->mode=%d\n",
+			__func__, t, cd->mode);
+
+	if (IS_TMO(t)) {
+		dev_err(cd->dev, "%s: %s\n", __func__,
+				"tmo waiting mode change");
+		mutex_lock(&cd->system_lock);
+		cd->int_status &= ~CY_INT_MODE_CHANGE;
+		mutex_unlock(&cd->system_lock);
+		rc = -EINVAL;
+	}
+
+exit:
+	return rc;
+}
+
+static void cyttsp4_watchdog_work(struct work_struct *work)
+{
+	struct cyttsp4 *cd =
+		container_of(work, struct cyttsp4, watchdog_work);
+	u8 *mode;
+	int retval;
+
+	mutex_lock(&cd->system_lock);
+	retval = cyttsp4_load_status_regs(cd);
+	if (retval < 0) {
+		dev_err(cd->dev,
+			"%s: failed to access device in watchdog timer r=%d\n",
+			__func__, retval);
+		cyttsp4_queue_startup_(cd);
+		goto cyttsp4_timer_watchdog_exit_error;
+	}
+	mode = &cd->sysinfo.xy_mode[CY_REG_BASE];
+	if (IS_BOOTLOADER(mode[0], mode[1])) {
+		dev_err(cd->dev,
+			"%s: device found in bootloader mode when operational mode\n",
+			__func__);
+		cyttsp4_queue_startup_(cd);
+		goto cyttsp4_timer_watchdog_exit_error;
+	}
+
+	cyttsp4_start_wd_timer(cd);
+cyttsp4_timer_watchdog_exit_error:
+	mutex_unlock(&cd->system_lock);
+	return;
+}
+
+static int cyttsp4_core_sleep_(struct cyttsp4 *cd)
+{
+	enum cyttsp4_sleep_state ss = SS_SLEEP_ON;
+	enum cyttsp4_int_state int_status = CY_INT_IGNORE;
+	int rc = 0;
+	u8 mode[2];
+
+	/* Already in sleep mode? */
+	mutex_lock(&cd->system_lock);
+	if (cd->sleep_state == SS_SLEEP_ON) {
+		mutex_unlock(&cd->system_lock);
+		return 0;
+	}
+	cd->sleep_state = SS_SLEEPING;
+	mutex_unlock(&cd->system_lock);
+
+	cyttsp4_stop_wd_timer(cd);
+
+	/* Wait until currently running IRQ handler exits and disable IRQ */
+	disable_irq(cd->irq);
+
+	dev_vdbg(cd->dev, "%s: write DEEP SLEEP...\n", __func__);
+	mutex_lock(&cd->system_lock);
+	rc = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode);
+	if (rc) {
+		mutex_unlock(&cd->system_lock);
+		dev_err(cd->dev, "%s: Fail read adapter r=%d\n", __func__, rc);
+		goto error;
+	}
+
+	if (IS_BOOTLOADER(mode[0], mode[1])) {
+		mutex_unlock(&cd->system_lock);
+		dev_err(cd->dev, "%s: Device in BOOTLADER mode.\n", __func__);
+		rc = -EINVAL;
+		goto error;
+	}
+
+	mode[0] |= CY_HST_SLEEP;
+	rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(mode[0]), &mode[0]);
+	mutex_unlock(&cd->system_lock);
+	if (rc) {
+		dev_err(cd->dev, "%s: Fail write adapter r=%d\n", __func__, rc);
+		goto error;
+	}
+	dev_vdbg(cd->dev, "%s: write DEEP SLEEP succeeded\n", __func__);
+
+	if (cd->cpdata->power) {
+		dev_dbg(cd->dev, "%s: Power down HW\n", __func__);
+		rc = cd->cpdata->power(cd->cpdata, 0, cd->dev, &cd->ignore_irq);
+	} else {
+		dev_dbg(cd->dev, "%s: No power function\n", __func__);
+		rc = 0;
+	}
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: HW Power down fails r=%d\n",
+				__func__, rc);
+		goto error;
+	}
+
+	/* Give time to FW to sleep */
+	msleep(50);
+
+	goto exit;
+
+error:
+	ss = SS_SLEEP_OFF;
+	int_status = CY_INT_NONE;
+	cyttsp4_start_wd_timer(cd);
+
+exit:
+	mutex_lock(&cd->system_lock);
+	cd->sleep_state = ss;
+	cd->int_status |= int_status;
+	mutex_unlock(&cd->system_lock);
+	enable_irq(cd->irq);
+	return rc;
+}
+
+static int cyttsp4_startup_(struct cyttsp4 *cd)
+{
+	int retry = CY_CORE_STARTUP_RETRY_COUNT;
+	int rc;
+
+	cyttsp4_stop_wd_timer(cd);
+
+reset:
+	if (retry != CY_CORE_STARTUP_RETRY_COUNT)
+		dev_dbg(cd->dev, "%s: Retry %d\n", __func__,
+			CY_CORE_STARTUP_RETRY_COUNT - retry);
+
+	/* reset hardware and wait for heartbeat */
+	rc = cyttsp4_reset_and_wait(cd);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: Error on h/w reset r=%d\n", __func__, rc);
+		if (retry--)
+			goto reset;
+		goto exit;
+	}
+
+	/* exit bl into sysinfo mode */
+	dev_vdbg(cd->dev, "%s: write exit ldr...\n", __func__);
+	mutex_lock(&cd->system_lock);
+	cd->int_status &= ~CY_INT_IGNORE;
+	cd->int_status |= CY_INT_MODE_CHANGE;
+
+	rc = cyttsp4_adap_write(cd, CY_REG_BASE, sizeof(ldr_exit),
+			(u8 *)ldr_exit);
+	mutex_unlock(&cd->system_lock);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: Fail write r=%d\n", __func__, rc);
+		if (retry--)
+			goto reset;
+		goto exit;
+	}
+
+	rc = cyttsp4_wait_sysinfo_mode(cd);
+	if (rc < 0) {
+		u8 buf[sizeof(ldr_err_app)];
+		int rc1;
+
+		/* Check for invalid/corrupted touch application */
+		rc1 = cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(ldr_err_app),
+				buf);
+		if (rc1) {
+			dev_err(cd->dev, "%s: Fail read r=%d\n", __func__, rc1);
+		} else if (!memcmp(buf, ldr_err_app, sizeof(ldr_err_app))) {
+			dev_err(cd->dev, "%s: Error launching touch application\n",
+				__func__);
+			mutex_lock(&cd->system_lock);
+			cd->invalid_touch_app = true;
+			mutex_unlock(&cd->system_lock);
+			goto exit_no_wd;
+		}
+
+		if (retry--)
+			goto reset;
+		goto exit;
+	}
+
+	mutex_lock(&cd->system_lock);
+	cd->invalid_touch_app = false;
+	mutex_unlock(&cd->system_lock);
+
+	/* read sysinfo data */
+	dev_vdbg(cd->dev, "%s: get sysinfo regs..\n", __func__);
+	rc = cyttsp4_get_sysinfo_regs(cd);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: failed to get sysinfo regs rc=%d\n",
+			__func__, rc);
+		if (retry--)
+			goto reset;
+		goto exit;
+	}
+
+	rc = cyttsp4_set_mode(cd, CY_MODE_OPERATIONAL);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: failed to set mode to operational rc=%d\n",
+			__func__, rc);
+		if (retry--)
+			goto reset;
+		goto exit;
+	}
+
+	cyttsp4_lift_all(&cd->md);
+
+	/* restore to sleep if was suspended */
+	mutex_lock(&cd->system_lock);
+	if (cd->sleep_state == SS_SLEEP_ON) {
+		cd->sleep_state = SS_SLEEP_OFF;
+		mutex_unlock(&cd->system_lock);
+		cyttsp4_core_sleep_(cd);
+		goto exit_no_wd;
+	}
+	mutex_unlock(&cd->system_lock);
+
+exit:
+	cyttsp4_start_wd_timer(cd);
+exit_no_wd:
+	return rc;
+}
+
+static int cyttsp4_startup(struct cyttsp4 *cd)
+{
+	int rc;
+
+	mutex_lock(&cd->system_lock);
+	cd->startup_state = STARTUP_RUNNING;
+	mutex_unlock(&cd->system_lock);
+
+	rc = cyttsp4_request_exclusive(cd, cd->dev,
+			CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
+				__func__, cd->exclusive_dev, cd->dev);
+		goto exit;
+	}
+
+	rc = cyttsp4_startup_(cd);
+
+	if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
+		/* Don't return fail code, mode is already changed. */
+		dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
+	else
+		dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
+
+exit:
+	mutex_lock(&cd->system_lock);
+	cd->startup_state = STARTUP_NONE;
+	mutex_unlock(&cd->system_lock);
+
+	/* Wake the waiters for end of startup */
+	wake_up(&cd->wait_q);
+
+	return rc;
+}
+
+static void cyttsp4_startup_work_function(struct work_struct *work)
+{
+	struct cyttsp4 *cd =  container_of(work, struct cyttsp4, startup_work);
+	int rc;
+
+	rc = cyttsp4_startup(cd);
+	if (rc < 0)
+		dev_err(cd->dev, "%s: Fail queued startup r=%d\n",
+			__func__, rc);
+}
+
+static void cyttsp4_free_si_ptrs(struct cyttsp4 *cd)
+{
+	struct cyttsp4_sysinfo *si = &cd->sysinfo;
+
+	if (!si)
+		return;
+
+	kfree(si->si_ptrs.cydata);
+	kfree(si->si_ptrs.test);
+	kfree(si->si_ptrs.pcfg);
+	kfree(si->si_ptrs.opcfg);
+	kfree(si->si_ptrs.ddata);
+	kfree(si->si_ptrs.mdata);
+	kfree(si->btn);
+	kfree(si->xy_mode);
+	kfree(si->xy_data);
+	kfree(si->btn_rec_data);
+}
+
+#ifdef CONFIG_PM
+static int cyttsp4_core_sleep(struct cyttsp4 *cd)
+{
+	int rc;
+
+	rc = cyttsp4_request_exclusive(cd, cd->dev,
+			CY_CORE_SLEEP_REQUEST_EXCLUSIVE_TIMEOUT);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
+				__func__, cd->exclusive_dev, cd->dev);
+		return 0;
+	}
+
+	rc = cyttsp4_core_sleep_(cd);
+
+	if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
+		dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
+	else
+		dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
+
+	return rc;
+}
+
+static int cyttsp4_core_wake_(struct cyttsp4 *cd)
+{
+	struct device *dev = cd->dev;
+	int rc;
+	u8 mode;
+	int t;
+
+	/* Already woken? */
+	mutex_lock(&cd->system_lock);
+	if (cd->sleep_state == SS_SLEEP_OFF) {
+		mutex_unlock(&cd->system_lock);
+		return 0;
+	}
+	cd->int_status &= ~CY_INT_IGNORE;
+	cd->int_status |= CY_INT_AWAKE;
+	cd->sleep_state = SS_WAKING;
+
+	if (cd->cpdata->power) {
+		dev_dbg(dev, "%s: Power up HW\n", __func__);
+		rc = cd->cpdata->power(cd->cpdata, 1, dev, &cd->ignore_irq);
+	} else {
+		dev_dbg(dev, "%s: No power function\n", __func__);
+		rc = -ENOSYS;
+	}
+	if (rc < 0) {
+		dev_err(dev, "%s: HW Power up fails r=%d\n",
+				__func__, rc);
+
+		/* Initiate a read transaction to wake up */
+		cyttsp4_adap_read(cd, CY_REG_BASE, sizeof(mode), &mode);
+	} else
+		dev_vdbg(cd->dev, "%s: HW power up succeeds\n",
+			__func__);
+	mutex_unlock(&cd->system_lock);
+
+	t = wait_event_timeout(cd->wait_q,
+			(cd->int_status & CY_INT_AWAKE) == 0,
+			msecs_to_jiffies(CY_CORE_WAKEUP_TIMEOUT));
+	if (IS_TMO(t)) {
+		dev_err(dev, "%s: TMO waiting for wakeup\n", __func__);
+		mutex_lock(&cd->system_lock);
+		cd->int_status &= ~CY_INT_AWAKE;
+		/* Try starting up */
+		cyttsp4_queue_startup_(cd);
+		mutex_unlock(&cd->system_lock);
+	}
+
+	mutex_lock(&cd->system_lock);
+	cd->sleep_state = SS_SLEEP_OFF;
+	mutex_unlock(&cd->system_lock);
+
+	cyttsp4_start_wd_timer(cd);
+
+	return 0;
+}
+
+static int cyttsp4_core_wake(struct cyttsp4 *cd)
+{
+	int rc;
+
+	rc = cyttsp4_request_exclusive(cd, cd->dev,
+			CY_CORE_REQUEST_EXCLUSIVE_TIMEOUT);
+	if (rc < 0) {
+		dev_err(cd->dev, "%s: fail get exclusive ex=%p own=%p\n",
+				__func__, cd->exclusive_dev, cd->dev);
+		return 0;
+	}
+
+	rc = cyttsp4_core_wake_(cd);
+
+	if (cyttsp4_release_exclusive(cd, cd->dev) < 0)
+		dev_err(cd->dev, "%s: fail to release exclusive\n", __func__);
+	else
+		dev_vdbg(cd->dev, "%s: pass release exclusive\n", __func__);
+
+	return rc;
+}
+
+static int cyttsp4_core_suspend(struct device *dev)
+{
+	struct cyttsp4 *cd = dev_get_drvdata(dev);
+	struct cyttsp4_mt_data *md = &cd->md;
+	int rc;
+
+	md->is_suspended = true;
+
+	rc = cyttsp4_core_sleep(cd);
+	if (rc < 0) {
+		dev_err(dev, "%s: Error on sleep\n", __func__);
+		return -EAGAIN;
+	}
+	return 0;
+}
+
+static int cyttsp4_core_resume(struct device *dev)
+{
+	struct cyttsp4 *cd = dev_get_drvdata(dev);
+	struct cyttsp4_mt_data *md = &cd->md;
+	int rc;
+
+	md->is_suspended = false;
+
+	rc = cyttsp4_core_wake(cd);
+	if (rc < 0) {
+		dev_err(dev, "%s: Error on wake\n", __func__);
+		return -EAGAIN;
+	}
+
+	return 0;
+}
+#endif
+
+const struct dev_pm_ops cyttsp4_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(cyttsp4_core_suspend, cyttsp4_core_resume)
+	SET_RUNTIME_PM_OPS(cyttsp4_core_suspend, cyttsp4_core_resume, NULL)
+};
+EXPORT_SYMBOL_GPL(cyttsp4_pm_ops);
+
+static int cyttsp4_mt_open(struct input_dev *input)
+{
+	pm_runtime_get(input->dev.parent);
+	return 0;
+}
+
+static void cyttsp4_mt_close(struct input_dev *input)
+{
+	struct cyttsp4_mt_data *md = input_get_drvdata(input);
+	mutex_lock(&md->report_lock);
+	if (!md->is_suspended)
+		pm_runtime_put(input->dev.parent);
+	mutex_unlock(&md->report_lock);
+}
+
+
+static int cyttsp4_setup_input_device(struct cyttsp4 *cd)
+{
+	struct device *dev = cd->dev;
+	struct cyttsp4_mt_data *md = &cd->md;
+	int signal = CY_IGNORE_VALUE;
+	int max_x, max_y, max_p, min, max;
+	int max_x_tmp, max_y_tmp;
+	int i;
+	int rc;
+
+	dev_vdbg(dev, "%s: Initialize event signals\n", __func__);
+	__set_bit(EV_ABS, md->input->evbit);
+	__set_bit(EV_REL, md->input->evbit);
+	__set_bit(EV_KEY, md->input->evbit);
+
+	max_x_tmp = md->si->si_ofs.max_x;
+	max_y_tmp = md->si->si_ofs.max_y;
+
+	/* get maximum values from the sysinfo data */
+	if (md->pdata->flags & CY_FLAG_FLIP) {
+		max_x = max_y_tmp - 1;
+		max_y = max_x_tmp - 1;
+	} else {
+		max_x = max_x_tmp - 1;
+		max_y = max_y_tmp - 1;
+	}
+	max_p = md->si->si_ofs.max_p;
+
+	/* set event signal capabilities */
+	for (i = 0; i < (md->pdata->frmwrk->size / CY_NUM_ABS_SET); i++) {
+		signal = md->pdata->frmwrk->abs
+			[(i * CY_NUM_ABS_SET) + CY_SIGNAL_OST];
+		if (signal != CY_IGNORE_VALUE) {
+			__set_bit(signal, md->input->absbit);
+			min = md->pdata->frmwrk->abs
+				[(i * CY_NUM_ABS_SET) + CY_MIN_OST];
+			max = md->pdata->frmwrk->abs
+				[(i * CY_NUM_ABS_SET) + CY_MAX_OST];
+			if (i == CY_ABS_ID_OST) {
+				/* shift track ids down to start at 0 */
+				max = max - min;
+				min = min - min;
+			} else if (i == CY_ABS_X_OST)
+				max = max_x;
+			else if (i == CY_ABS_Y_OST)
+				max = max_y;
+			else if (i == CY_ABS_P_OST)
+				max = max_p;
+			input_set_abs_params(md->input, signal, min, max,
+				md->pdata->frmwrk->abs
+				[(i * CY_NUM_ABS_SET) + CY_FUZZ_OST],
+				md->pdata->frmwrk->abs
+				[(i * CY_NUM_ABS_SET) + CY_FLAT_OST]);
+			dev_dbg(dev, "%s: register signal=%02X min=%d max=%d\n",
+				__func__, signal, min, max);
+			if ((i == CY_ABS_ID_OST) &&
+				(md->si->si_ofs.tch_rec_size <
+				CY_TMA4XX_TCH_REC_SIZE))
+				break;
+		}
+	}
+
+	input_mt_init_slots(md->input, md->si->si_ofs.tch_abs[CY_TCH_T].max,
+			INPUT_MT_DIRECT);
+	rc = input_register_device(md->input);
+	if (rc < 0)
+		dev_err(dev, "%s: Error, failed register input device r=%d\n",
+			__func__, rc);
+	return rc;
+}
+
+static int cyttsp4_mt_probe(struct cyttsp4 *cd)
+{
+	struct device *dev = cd->dev;
+	struct cyttsp4_mt_data *md = &cd->md;
+	struct cyttsp4_mt_platform_data *pdata = cd->pdata->mt_pdata;
+	int rc = 0;
+
+	mutex_init(&md->report_lock);
+	md->pdata = pdata;
+	/* Create the input device and register it. */
+	dev_vdbg(dev, "%s: Create the input device and register it\n",
+		__func__);
+	md->input = input_allocate_device();
+	if (md->input == NULL) {
+		dev_err(dev, "%s: Error, failed to allocate input device\n",
+			__func__);
+		rc = -ENOSYS;
+		goto error_alloc_failed;
+	}
+
+	md->input->name = pdata->inp_dev_name;
+	scnprintf(md->phys, sizeof(md->phys)-1, "%s", dev_name(dev));
+	md->input->phys = md->phys;
+	md->input->id.bustype = cd->bus_ops->bustype;
+	md->input->dev.parent = dev;
+	md->input->open = cyttsp4_mt_open;
+	md->input->close = cyttsp4_mt_close;
+	input_set_drvdata(md->input, md);
+
+	/* get sysinfo */
+	md->si = &cd->sysinfo;
+	if (!md->si) {
+		dev_err(dev, "%s: Fail get sysinfo pointer from core p=%p\n",
+			__func__, md->si);
+		goto error_get_sysinfo;
+	}
+
+	rc = cyttsp4_setup_input_device(cd);
+	if (rc)
+		goto error_init_input;
+
+	return 0;
+
+error_init_input:
+	input_free_device(md->input);
+error_get_sysinfo:
+	input_set_drvdata(md->input, NULL);
+error_alloc_failed:
+	dev_err(dev, "%s failed.\n", __func__);
+	return rc;
+}
+
+struct cyttsp4 *cyttsp4_probe(const struct cyttsp4_bus_ops *ops,
+		struct device *dev, u16 irq, size_t xfer_buf_size)
+{
+	struct cyttsp4 *cd;
+	struct cyttsp4_platform_data *pdata = dev_get_platdata(dev);
+	unsigned long irq_flags;
+	int rc = 0;
+
+	if (!pdata || !pdata->core_pdata || !pdata->mt_pdata) {
+		dev_err(dev, "%s: Missing platform data\n", __func__);
+		rc = -ENODEV;
+		goto error_no_pdata;
+	}
+
+	cd = kzalloc(sizeof(*cd), GFP_KERNEL);
+	if (!cd) {
+		dev_err(dev, "%s: Error, kzalloc\n", __func__);
+		rc = -ENOMEM;
+		goto error_alloc_data;
+	}
+
+	cd->xfer_buf = kzalloc(xfer_buf_size, GFP_KERNEL);
+	if (!cd->xfer_buf) {
+		dev_err(dev, "%s: Error, kzalloc\n", __func__);
+		rc = -ENOMEM;
+		goto error_free_cd;
+	}
+
+	/* Initialize device info */
+	cd->dev = dev;
+	cd->pdata = pdata;
+	cd->cpdata = pdata->core_pdata;
+	cd->bus_ops = ops;
+
+	/* Initialize mutexes and spinlocks */
+	mutex_init(&cd->system_lock);
+	mutex_init(&cd->adap_lock);
+
+	/* Initialize wait queue */
+	init_waitqueue_head(&cd->wait_q);
+
+	/* Initialize works */
+	INIT_WORK(&cd->startup_work, cyttsp4_startup_work_function);
+	INIT_WORK(&cd->watchdog_work, cyttsp4_watchdog_work);
+
+	/* Initialize IRQ */
+	cd->irq = gpio_to_irq(cd->cpdata->irq_gpio);
+	if (cd->irq < 0) {
+		rc = -EINVAL;
+		goto error_free_xfer;
+	}
+
+	dev_set_drvdata(dev, cd);
+
+	/* Call platform init function */
+	if (cd->cpdata->init) {
+		dev_dbg(cd->dev, "%s: Init HW\n", __func__);
+		rc = cd->cpdata->init(cd->cpdata, 1, cd->dev);
+	} else {
+		dev_dbg(cd->dev, "%s: No HW INIT function\n", __func__);
+		rc = 0;
+	}
+	if (rc < 0)
+		dev_err(cd->dev, "%s: HW Init fail r=%d\n", __func__, rc);
+
+	dev_dbg(dev, "%s: initialize threaded irq=%d\n", __func__, cd->irq);
+	if (cd->cpdata->level_irq_udelay > 0)
+		/* use level triggered interrupts */
+		irq_flags = IRQF_TRIGGER_LOW | IRQF_ONESHOT;
+	else
+		/* use edge triggered interrupts */
+		irq_flags = IRQF_TRIGGER_FALLING | IRQF_ONESHOT;
+
+	rc = request_threaded_irq(cd->irq, NULL, cyttsp4_irq, irq_flags,
+		dev_name(dev), cd);
+	if (rc < 0) {
+		dev_err(dev, "%s: Error, could not request irq\n", __func__);
+		goto error_request_irq;
+	}
+
+	/* Setup watchdog timer */
+	setup_timer(&cd->watchdog_timer, cyttsp4_watchdog_timer,
+		(unsigned long)cd);
+
+	/*
+	 * call startup directly to ensure that the device
+	 * is tested before leaving the probe
+	 */
+	rc = cyttsp4_startup(cd);
+
+	/* Do not fail probe if startup fails but the device is detected */
+	if (rc < 0 && cd->mode == CY_MODE_UNKNOWN) {
+		dev_err(cd->dev, "%s: Fail initial startup r=%d\n",
+			__func__, rc);
+		goto error_startup;
+	}
+
+	rc = cyttsp4_mt_probe(cd);
+	if (rc < 0) {
+		dev_err(dev, "%s: Error, fail mt probe\n", __func__);
+		goto error_startup;
+	}
+
+	pm_runtime_enable(dev);
+
+	return cd;
+
+error_startup:
+	cancel_work_sync(&cd->startup_work);
+	cyttsp4_stop_wd_timer(cd);
+	pm_runtime_disable(dev);
+	cyttsp4_free_si_ptrs(cd);
+	free_irq(cd->irq, cd);
+error_request_irq:
+	if (cd->cpdata->init)
+		cd->cpdata->init(cd->cpdata, 0, dev);
+error_free_xfer:
+	kfree(cd->xfer_buf);
+error_free_cd:
+	kfree(cd);
+error_alloc_data:
+error_no_pdata:
+	dev_err(dev, "%s failed.\n", __func__);
+	return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(cyttsp4_probe);
+
+static void cyttsp4_mt_release(struct cyttsp4_mt_data *md)
+{
+	input_unregister_device(md->input);
+	input_set_drvdata(md->input, NULL);
+}
+
+int cyttsp4_remove(struct cyttsp4 *cd)
+{
+	struct device *dev = cd->dev;
+
+	cyttsp4_mt_release(&cd->md);
+
+	/*
+	 * Suspend the device before freeing the startup_work and stopping
+	 * the watchdog since sleep function restarts watchdog on failure
+	 */
+	pm_runtime_suspend(dev);
+	pm_runtime_disable(dev);
+
+	cancel_work_sync(&cd->startup_work);
+
+	cyttsp4_stop_wd_timer(cd);
+
+	free_irq(cd->irq, cd);
+	if (cd->cpdata->init)
+		cd->cpdata->init(cd->cpdata, 0, dev);
+	cyttsp4_free_si_ptrs(cd);
+	kfree(cd);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cyttsp4_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen core driver");
+MODULE_AUTHOR("Cypress");
diff --git a/drivers/input/touchscreen/cyttsp4_core.h b/drivers/input/touchscreen/cyttsp4_core.h
new file mode 100644
index 0000000..8e0d4d4
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp4_core.h
@@ -0,0 +1,472 @@
+/*
+ * cyttsp4_core.h
+ * Cypress TrueTouch(TM) Standard Product V4 Core driver module.
+ * For use with Cypress Txx4xx parts.
+ * Supported parts include:
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2012 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#ifndef _LINUX_CYTTSP4_CORE_H
+#define _LINUX_CYTTSP4_CORE_H
+
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/input.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/module.h>
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/platform_data/cyttsp4.h>
+
+#define CY_REG_BASE			0x00
+
+#define CY_POST_CODEL_WDG_RST		0x01
+#define CY_POST_CODEL_CFG_DATA_CRC_FAIL	0x02
+#define CY_POST_CODEL_PANEL_TEST_FAIL	0x04
+
+#define CY_NUM_BTN_PER_REG		4
+
+/* touch record system information offset masks and shifts */
+#define CY_BYTE_OFS_MASK		0x1F
+#define CY_BOFS_MASK			0xE0
+#define CY_BOFS_SHIFT			5
+
+#define CY_TMA1036_TCH_REC_SIZE		6
+#define CY_TMA4XX_TCH_REC_SIZE		9
+#define CY_TMA1036_MAX_TCH		0x0E
+#define CY_TMA4XX_MAX_TCH		0x1E
+
+#define CY_NORMAL_ORIGIN		0	/* upper, left corner */
+#define CY_INVERT_ORIGIN		1	/* lower, right corner */
+
+/* helpers */
+#define GET_NUM_TOUCHES(x)		((x) & 0x1F)
+#define IS_LARGE_AREA(x)		((x) & 0x20)
+#define IS_BAD_PKT(x)			((x) & 0x20)
+#define IS_BOOTLOADER(hst_mode, reset_detect)	\
+		((hst_mode) & 0x01 || (reset_detect) != 0)
+#define IS_TMO(t)			((t) == 0)
+
+
+enum cyttsp_cmd_bits {
+	CY_CMD_COMPLETE = (1 << 6),
+};
+
+/* Timeout in ms. */
+#define CY_WATCHDOG_TIMEOUT		1000
+
+#define CY_MAX_PRINT_SIZE		512
+#ifdef VERBOSE_DEBUG
+#define CY_MAX_PRBUF_SIZE		PIPE_BUF
+#define CY_PR_TRUNCATED			" truncated..."
+#endif
+
+enum cyttsp4_ic_grpnum {
+	CY_IC_GRPNUM_RESERVED,
+	CY_IC_GRPNUM_CMD_REGS,
+	CY_IC_GRPNUM_TCH_REP,
+	CY_IC_GRPNUM_DATA_REC,
+	CY_IC_GRPNUM_TEST_REC,
+	CY_IC_GRPNUM_PCFG_REC,
+	CY_IC_GRPNUM_TCH_PARM_VAL,
+	CY_IC_GRPNUM_TCH_PARM_SIZE,
+	CY_IC_GRPNUM_RESERVED1,
+	CY_IC_GRPNUM_RESERVED2,
+	CY_IC_GRPNUM_OPCFG_REC,
+	CY_IC_GRPNUM_DDATA_REC,
+	CY_IC_GRPNUM_MDATA_REC,
+	CY_IC_GRPNUM_TEST_REGS,
+	CY_IC_GRPNUM_BTN_KEYS,
+	CY_IC_GRPNUM_TTHE_REGS,
+	CY_IC_GRPNUM_NUM
+};
+
+enum cyttsp4_int_state {
+	CY_INT_NONE,
+	CY_INT_IGNORE      = (1 << 0),
+	CY_INT_MODE_CHANGE = (1 << 1),
+	CY_INT_EXEC_CMD    = (1 << 2),
+	CY_INT_AWAKE       = (1 << 3),
+};
+
+enum cyttsp4_mode {
+	CY_MODE_UNKNOWN,
+	CY_MODE_BOOTLOADER   = (1 << 1),
+	CY_MODE_OPERATIONAL  = (1 << 2),
+	CY_MODE_SYSINFO      = (1 << 3),
+	CY_MODE_CAT          = (1 << 4),
+	CY_MODE_STARTUP      = (1 << 5),
+	CY_MODE_LOADER       = (1 << 6),
+	CY_MODE_CHANGE_MODE  = (1 << 7),
+	CY_MODE_CHANGED      = (1 << 8),
+	CY_MODE_CMD_COMPLETE = (1 << 9),
+};
+
+enum cyttsp4_sleep_state {
+	SS_SLEEP_OFF,
+	SS_SLEEP_ON,
+	SS_SLEEPING,
+	SS_WAKING,
+};
+
+enum cyttsp4_startup_state {
+	STARTUP_NONE,
+	STARTUP_QUEUED,
+	STARTUP_RUNNING,
+};
+
+#define CY_NUM_REVCTRL			8
+struct cyttsp4_cydata {
+	u8 ttpidh;
+	u8 ttpidl;
+	u8 fw_ver_major;
+	u8 fw_ver_minor;
+	u8 revctrl[CY_NUM_REVCTRL];
+	u8 blver_major;
+	u8 blver_minor;
+	u8 jtag_si_id3;
+	u8 jtag_si_id2;
+	u8 jtag_si_id1;
+	u8 jtag_si_id0;
+	u8 mfgid_sz;
+	u8 cyito_idh;
+	u8 cyito_idl;
+	u8 cyito_verh;
+	u8 cyito_verl;
+	u8 ttsp_ver_major;
+	u8 ttsp_ver_minor;
+	u8 device_info;
+	u8 mfg_id[];
+} __packed;
+
+struct cyttsp4_test {
+	u8 post_codeh;
+	u8 post_codel;
+} __packed;
+
+struct cyttsp4_pcfg {
+	u8 electrodes_x;
+	u8 electrodes_y;
+	u8 len_xh;
+	u8 len_xl;
+	u8 len_yh;
+	u8 len_yl;
+	u8 res_xh;
+	u8 res_xl;
+	u8 res_yh;
+	u8 res_yl;
+	u8 max_zh;
+	u8 max_zl;
+	u8 panel_info0;
+} __packed;
+
+struct cyttsp4_tch_rec_params {
+	u8 loc;
+	u8 size;
+} __packed;
+
+#define CY_NUM_TCH_FIELDS		7
+#define CY_NUM_EXT_TCH_FIELDS		3
+struct cyttsp4_opcfg {
+	u8 cmd_ofs;
+	u8 rep_ofs;
+	u8 rep_szh;
+	u8 rep_szl;
+	u8 num_btns;
+	u8 tt_stat_ofs;
+	u8 obj_cfg0;
+	u8 max_tchs;
+	u8 tch_rec_size;
+	struct cyttsp4_tch_rec_params tch_rec_old[CY_NUM_TCH_FIELDS];
+	u8 btn_rec_size;	/* btn record size (in bytes) */
+	u8 btn_diff_ofs;	/* btn data loc, diff counts  */
+	u8 btn_diff_size;	/* btn size of diff counts (in bits) */
+	struct cyttsp4_tch_rec_params tch_rec_new[CY_NUM_EXT_TCH_FIELDS];
+} __packed;
+
+struct cyttsp4_sysinfo_ptr {
+	struct cyttsp4_cydata *cydata;
+	struct cyttsp4_test *test;
+	struct cyttsp4_pcfg *pcfg;
+	struct cyttsp4_opcfg *opcfg;
+	struct cyttsp4_ddata *ddata;
+	struct cyttsp4_mdata *mdata;
+} __packed;
+
+struct cyttsp4_sysinfo_data {
+	u8 hst_mode;
+	u8 reserved;
+	u8 map_szh;
+	u8 map_szl;
+	u8 cydata_ofsh;
+	u8 cydata_ofsl;
+	u8 test_ofsh;
+	u8 test_ofsl;
+	u8 pcfg_ofsh;
+	u8 pcfg_ofsl;
+	u8 opcfg_ofsh;
+	u8 opcfg_ofsl;
+	u8 ddata_ofsh;
+	u8 ddata_ofsl;
+	u8 mdata_ofsh;
+	u8 mdata_ofsl;
+} __packed;
+
+enum cyttsp4_tch_abs {	/* for ordering within the extracted touch data array */
+	CY_TCH_X,	/* X */
+	CY_TCH_Y,	/* Y */
+	CY_TCH_P,	/* P (Z) */
+	CY_TCH_T,	/* TOUCH ID */
+	CY_TCH_E,	/* EVENT ID */
+	CY_TCH_O,	/* OBJECT ID */
+	CY_TCH_W,	/* SIZE */
+	CY_TCH_MAJ,	/* TOUCH_MAJOR */
+	CY_TCH_MIN,	/* TOUCH_MINOR */
+	CY_TCH_OR,	/* ORIENTATION */
+	CY_TCH_NUM_ABS
+};
+
+static const char * const cyttsp4_tch_abs_string[] = {
+	[CY_TCH_X]	= "X",
+	[CY_TCH_Y]	= "Y",
+	[CY_TCH_P]	= "P",
+	[CY_TCH_T]	= "T",
+	[CY_TCH_E]	= "E",
+	[CY_TCH_O]	= "O",
+	[CY_TCH_W]	= "W",
+	[CY_TCH_MAJ]	= "MAJ",
+	[CY_TCH_MIN]	= "MIN",
+	[CY_TCH_OR]	= "OR",
+	[CY_TCH_NUM_ABS] = "INVALID"
+};
+
+struct cyttsp4_touch {
+	int abs[CY_TCH_NUM_ABS];
+};
+
+struct cyttsp4_tch_abs_params {
+	size_t ofs;	/* abs byte offset */
+	size_t size;	/* size in bits */
+	size_t max;	/* max value */
+	size_t bofs;	/* bit offset */
+};
+
+struct cyttsp4_sysinfo_ofs {
+	size_t chip_type;
+	size_t cmd_ofs;
+	size_t rep_ofs;
+	size_t rep_sz;
+	size_t num_btns;
+	size_t num_btn_regs;	/* ceil(num_btns/4) */
+	size_t tt_stat_ofs;
+	size_t tch_rec_size;
+	size_t obj_cfg0;
+	size_t max_tchs;
+	size_t mode_size;
+	size_t data_size;
+	size_t map_sz;
+	size_t max_x;
+	size_t x_origin;	/* left or right corner */
+	size_t max_y;
+	size_t y_origin;	/* upper or lower corner */
+	size_t max_p;
+	size_t cydata_ofs;
+	size_t test_ofs;
+	size_t pcfg_ofs;
+	size_t opcfg_ofs;
+	size_t ddata_ofs;
+	size_t mdata_ofs;
+	size_t cydata_size;
+	size_t test_size;
+	size_t pcfg_size;
+	size_t opcfg_size;
+	size_t ddata_size;
+	size_t mdata_size;
+	size_t btn_keys_size;
+	struct cyttsp4_tch_abs_params tch_abs[CY_TCH_NUM_ABS];
+	size_t btn_rec_size; /* btn record size (in bytes) */
+	size_t btn_diff_ofs;/* btn data loc ,diff counts, (Op-Mode byte ofs) */
+	size_t btn_diff_size;/* btn size of diff counts (in bits) */
+};
+
+enum cyttsp4_btn_state {
+	CY_BTN_RELEASED,
+	CY_BTN_PRESSED,
+	CY_BTN_NUM_STATE
+};
+
+struct cyttsp4_btn {
+	bool enabled;
+	int state;	/* CY_BTN_PRESSED, CY_BTN_RELEASED */
+	int key_code;
+};
+
+struct cyttsp4_sysinfo {
+	bool ready;
+	struct cyttsp4_sysinfo_data si_data;
+	struct cyttsp4_sysinfo_ptr si_ptrs;
+	struct cyttsp4_sysinfo_ofs si_ofs;
+	struct cyttsp4_btn *btn;	/* button states */
+	u8 *btn_rec_data;		/* button diff count data */
+	u8 *xy_mode;			/* operational mode and status regs */
+	u8 *xy_data;			/* operational touch regs */
+};
+
+struct cyttsp4_mt_data {
+	struct cyttsp4_mt_platform_data *pdata;
+	struct cyttsp4_sysinfo *si;
+	struct input_dev *input;
+	struct mutex report_lock;
+	bool is_suspended;
+	char phys[NAME_MAX];
+	int num_prv_tch;
+};
+
+struct cyttsp4 {
+	struct device *dev;
+	struct mutex system_lock;
+	struct mutex adap_lock;
+	enum cyttsp4_mode mode;
+	enum cyttsp4_sleep_state sleep_state;
+	enum cyttsp4_startup_state startup_state;
+	int int_status;
+	wait_queue_head_t wait_q;
+	int irq;
+	struct work_struct startup_work;
+	struct work_struct watchdog_work;
+	struct timer_list watchdog_timer;
+	struct cyttsp4_sysinfo sysinfo;
+	void *exclusive_dev;
+	int exclusive_waits;
+	atomic_t ignore_irq;
+	bool invalid_touch_app;
+	struct cyttsp4_mt_data md;
+	struct cyttsp4_platform_data *pdata;
+	struct cyttsp4_core_platform_data *cpdata;
+	const struct cyttsp4_bus_ops *bus_ops;
+	u8 *xfer_buf;
+#ifdef VERBOSE_DEBUG
+	u8 pr_buf[CY_MAX_PRBUF_SIZE];
+#endif
+};
+
+struct cyttsp4_bus_ops {
+	u16 bustype;
+	int (*write)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
+			const void *values);
+	int (*read)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
+			void *values);
+};
+
+enum cyttsp4_hst_mode_bits {
+	CY_HST_TOGGLE      = (1 << 7),
+	CY_HST_MODE_CHANGE = (1 << 3),
+	CY_HST_MODE        = (7 << 4),
+	CY_HST_OPERATE     = (0 << 4),
+	CY_HST_SYSINFO     = (1 << 4),
+	CY_HST_CAT         = (2 << 4),
+	CY_HST_LOWPOW      = (1 << 2),
+	CY_HST_SLEEP       = (1 << 1),
+	CY_HST_RESET       = (1 << 0),
+};
+
+/* abs settings */
+#define CY_IGNORE_VALUE			0xFFFF
+
+/* abs signal capabilities offsets in the frameworks array */
+enum cyttsp4_sig_caps {
+	CY_SIGNAL_OST,
+	CY_MIN_OST,
+	CY_MAX_OST,
+	CY_FUZZ_OST,
+	CY_FLAT_OST,
+	CY_NUM_ABS_SET	/* number of signal capability fields */
+};
+
+/* abs axis signal offsets in the framworks array  */
+enum cyttsp4_sig_ost {
+	CY_ABS_X_OST,
+	CY_ABS_Y_OST,
+	CY_ABS_P_OST,
+	CY_ABS_W_OST,
+	CY_ABS_ID_OST,
+	CY_ABS_MAJ_OST,
+	CY_ABS_MIN_OST,
+	CY_ABS_OR_OST,
+	CY_NUM_ABS_OST	/* number of abs signals */
+};
+
+enum cyttsp4_flags {
+	CY_FLAG_NONE = 0x00,
+	CY_FLAG_HOVER = 0x04,
+	CY_FLAG_FLIP = 0x08,
+	CY_FLAG_INV_X = 0x10,
+	CY_FLAG_INV_Y = 0x20,
+	CY_FLAG_VKEYS = 0x40,
+};
+
+enum cyttsp4_object_id {
+	CY_OBJ_STANDARD_FINGER,
+	CY_OBJ_LARGE_OBJECT,
+	CY_OBJ_STYLUS,
+	CY_OBJ_HOVER,
+};
+
+enum cyttsp4_event_id {
+	CY_EV_NO_EVENT,
+	CY_EV_TOUCHDOWN,
+	CY_EV_MOVE,		/* significant displacement (> act dist) */
+	CY_EV_LIFTOFF,		/* record reports last position */
+};
+
+/* x-axis resolution of panel in pixels */
+#define CY_PCFG_RESOLUTION_X_MASK	0x7F
+
+/* y-axis resolution of panel in pixels */
+#define CY_PCFG_RESOLUTION_Y_MASK	0x7F
+
+/* x-axis, 0:origin is on left side of panel, 1: right */
+#define CY_PCFG_ORIGIN_X_MASK		0x80
+
+/* y-axis, 0:origin is on top side of panel, 1: bottom */
+#define CY_PCFG_ORIGIN_Y_MASK		0x80
+
+static inline int cyttsp4_adap_read(struct cyttsp4 *ts, u16 addr, int size,
+		void *buf)
+{
+	return ts->bus_ops->read(ts->dev, ts->xfer_buf, addr, size, buf);
+}
+
+static inline int cyttsp4_adap_write(struct cyttsp4 *ts, u16 addr, int size,
+		const void *buf)
+{
+	return ts->bus_ops->write(ts->dev, ts->xfer_buf, addr, size, buf);
+}
+
+extern struct cyttsp4 *cyttsp4_probe(const struct cyttsp4_bus_ops *ops,
+		struct device *dev, u16 irq, size_t xfer_buf_size);
+extern int cyttsp4_remove(struct cyttsp4 *ts);
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
+		u8 length, const void *values);
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
+		u8 length, void *values);
+extern const struct dev_pm_ops cyttsp4_pm_ops;
+
+#endif /* _LINUX_CYTTSP4_CORE_H */
diff --git a/drivers/input/touchscreen/cyttsp4_i2c.c b/drivers/input/touchscreen/cyttsp4_i2c.c
new file mode 100644
index 0000000..564e490
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp4_i2c.c
@@ -0,0 +1,85 @@
+/*
+ * cyttsp_i2c.c
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress  Txx4xx parts.
+ * Supported parts include:
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2013 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#include "cyttsp4_core.h"
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+
+#define CYTTSP4_I2C_DATA_SIZE	(3 * 256)
+
+static const struct cyttsp4_bus_ops cyttsp4_i2c_bus_ops = {
+	.bustype	= BUS_I2C,
+	.write		= cyttsp_i2c_write_block_data,
+	.read           = cyttsp_i2c_read_block_data,
+};
+
+static int cyttsp4_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	struct cyttsp4 *ts;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "I2C functionality not Supported\n");
+		return -EIO;
+	}
+
+	ts = cyttsp4_probe(&cyttsp4_i2c_bus_ops, &client->dev, client->irq,
+			  CYTTSP4_I2C_DATA_SIZE);
+
+	return PTR_ERR_OR_ZERO(ts);
+}
+
+static int cyttsp4_i2c_remove(struct i2c_client *client)
+{
+	struct cyttsp4 *ts = i2c_get_clientdata(client);
+
+	cyttsp4_remove(ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id cyttsp4_i2c_id[] = {
+	{ CYTTSP4_I2C_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cyttsp4_i2c_id);
+
+static struct i2c_driver cyttsp4_i2c_driver = {
+	.driver = {
+		.name	= CYTTSP4_I2C_NAME,
+		.pm	= &cyttsp4_pm_ops,
+	},
+	.probe		= cyttsp4_i2c_probe,
+	.remove		= cyttsp4_i2c_remove,
+	.id_table	= cyttsp4_i2c_id,
+};
+
+module_i2c_driver(cyttsp4_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver");
+MODULE_AUTHOR("Cypress");
diff --git a/drivers/input/touchscreen/cyttsp4_spi.c b/drivers/input/touchscreen/cyttsp4_spi.c
new file mode 100644
index 0000000..ec5f7c7
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp4_spi.c
@@ -0,0 +1,199 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver.
+ * For use with Cypress Txx4xx parts.
+ * Supported parts include:
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2013 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#include "cyttsp4_core.h"
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+
+#define CY_SPI_WR_OP		0x00 /* r/~w */
+#define CY_SPI_RD_OP		0x01
+#define CY_SPI_BITS_PER_WORD	8
+#define CY_SPI_A8_BIT		0x02
+#define CY_SPI_WR_HEADER_BYTES	2
+#define CY_SPI_RD_HEADER_BYTES	1
+#define CY_SPI_CMD_BYTES	2
+#define CY_SPI_SYNC_BYTE	0
+#define CY_SPI_SYNC_ACK		0x62 /* from TRM *A protocol */
+#define CY_SPI_DATA_SIZE	(2 * 256)
+
+#define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
+
+static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
+			   u8 op, u16 reg, u8 *buf, int length)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_message msg;
+	struct spi_transfer xfer[2];
+	u8 *wr_buf = &xfer_buf[0];
+	u8 rd_buf[CY_SPI_CMD_BYTES];
+	int retval;
+	int i;
+
+	if (length > CY_SPI_DATA_SIZE) {
+		dev_err(dev, "%s: length %d is too big.\n",
+			__func__, length);
+		return -EINVAL;
+	}
+
+	memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
+	memset(rd_buf, 0, CY_SPI_CMD_BYTES);
+
+	wr_buf[0] = op + (((reg >> 8) & 0x1) ? CY_SPI_A8_BIT : 0);
+	if (op == CY_SPI_WR_OP) {
+		wr_buf[1] = reg & 0xFF;
+		if (length > 0)
+			memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
+	}
+
+	memset(xfer, 0, sizeof(xfer));
+	spi_message_init(&msg);
+
+	/*
+	  We set both TX and RX buffers because Cypress TTSP
+	  requires full duplex operation.
+	*/
+	xfer[0].tx_buf = wr_buf;
+	xfer[0].rx_buf = rd_buf;
+	switch (op) {
+	case CY_SPI_WR_OP:
+		xfer[0].len = length + CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+		break;
+
+	case CY_SPI_RD_OP:
+		xfer[0].len = CY_SPI_RD_HEADER_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+
+		xfer[1].rx_buf = buf;
+		xfer[1].len = length;
+		spi_message_add_tail(&xfer[1], &msg);
+		break;
+
+	default:
+		dev_err(dev, "%s: bad operation code=%d\n", __func__, op);
+		return -EINVAL;
+	}
+
+	retval = spi_sync(spi, &msg);
+	if (retval < 0) {
+		dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
+			__func__, retval, xfer[1].len, op);
+
+		/*
+		 * do not return here since was a bad ACK sequence
+		 * let the following ACK check handle any errors and
+		 * allow silent retries
+		 */
+	}
+
+	if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK) {
+		dev_dbg(dev, "%s: operation %d failed\n", __func__, op);
+
+		for (i = 0; i < CY_SPI_CMD_BYTES; i++)
+			dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n",
+				__func__, i, rd_buf[i]);
+		for (i = 0; i < length; i++)
+			dev_dbg(dev, "%s: test buf[%d]:0x%02x\n",
+				__func__, i, buf[i]);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
+				      u16 addr, u8 length, void *data)
+{
+	int rc;
+
+	rc = cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, NULL, 0);
+	if (rc)
+		return rc;
+	else
+		return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data,
+				length);
+}
+
+static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
+				       u16 addr, u8 length, const void *data)
+{
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
+			length);
+}
+
+static const struct cyttsp4_bus_ops cyttsp_spi_bus_ops = {
+	.bustype	= BUS_SPI,
+	.write		= cyttsp_spi_write_block_data,
+	.read		= cyttsp_spi_read_block_data,
+};
+
+static int cyttsp4_spi_probe(struct spi_device *spi)
+{
+	struct cyttsp4 *ts;
+	int error;
+
+	/* Set up SPI*/
+	spi->bits_per_word = CY_SPI_BITS_PER_WORD;
+	spi->mode = SPI_MODE_0;
+	error = spi_setup(spi);
+	if (error < 0) {
+		dev_err(&spi->dev, "%s: SPI setup error %d\n",
+			__func__, error);
+		return error;
+	}
+
+	ts = cyttsp4_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq,
+			  CY_SPI_DATA_BUF_SIZE);
+
+	return PTR_ERR_OR_ZERO(ts);
+}
+
+static int cyttsp4_spi_remove(struct spi_device *spi)
+{
+	struct cyttsp4 *ts = spi_get_drvdata(spi);
+	cyttsp4_remove(ts);
+
+	return 0;
+}
+
+static struct spi_driver cyttsp4_spi_driver = {
+	.driver = {
+		.name	= CYTTSP4_SPI_NAME,
+		.pm	= &cyttsp4_pm_ops,
+	},
+	.probe  = cyttsp4_spi_probe,
+	.remove = cyttsp4_spi_remove,
+};
+
+module_spi_driver(cyttsp4_spi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("spi:cyttsp4");
diff --git a/drivers/input/touchscreen/cyttsp_core.c b/drivers/input/touchscreen/cyttsp_core.c
new file mode 100644
index 0000000..5b74e8b
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_core.c
@@ -0,0 +1,638 @@
+/*
+ * Core Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+#include "cyttsp_core.h"
+
+/* Bootloader number of command keys */
+#define CY_NUM_BL_KEYS		8
+
+/* helpers */
+#define GET_NUM_TOUCHES(x)		((x) & 0x0F)
+#define IS_LARGE_AREA(x)		(((x) & 0x10) >> 4)
+#define IS_BAD_PKT(x)			((x) & 0x20)
+#define IS_VALID_APP(x)			((x) & 0x01)
+#define IS_OPERATIONAL_ERR(x)		((x) & 0x3F)
+#define GET_HSTMODE(reg)		(((reg) & 0x70) >> 4)
+#define GET_BOOTLOADERMODE(reg)		(((reg) & 0x10) >> 4)
+
+#define CY_REG_BASE			0x00
+#define CY_REG_ACT_DIST			0x1E
+#define CY_REG_ACT_INTRVL		0x1D
+#define CY_REG_TCH_TMOUT		(CY_REG_ACT_INTRVL + 1)
+#define CY_REG_LP_INTRVL		(CY_REG_TCH_TMOUT + 1)
+#define CY_MAXZ				255
+#define CY_DELAY_DFLT			20 /* ms */
+#define CY_DELAY_MAX			500
+#define CY_ACT_DIST_DFLT		0xF8
+#define CY_HNDSHK_BIT			0x80
+/* device mode bits */
+#define CY_OPERATE_MODE			0x00
+#define CY_SYSINFO_MODE			0x10
+/* power mode select bits */
+#define CY_SOFT_RESET_MODE		0x01 /* return to Bootloader mode */
+#define CY_DEEP_SLEEP_MODE		0x02
+#define CY_LOW_POWER_MODE		0x04
+
+/* Slots management */
+#define CY_MAX_FINGER			4
+#define CY_MAX_ID			16
+
+static const u8 bl_command[] = {
+	0x00,			/* file offset */
+	0xFF,			/* command */
+	0xA5,			/* exit bootloader command */
+	0, 1, 2, 3, 4, 5, 6, 7	/* default keys */
+};
+
+static int ttsp_read_block_data(struct cyttsp *ts, u8 command,
+				u8 length, void *buf)
+{
+	int error;
+	int tries;
+
+	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
+		error = ts->bus_ops->read(ts->dev, ts->xfer_buf, command,
+				length, buf);
+		if (!error)
+			return 0;
+
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return -EIO;
+}
+
+static int ttsp_write_block_data(struct cyttsp *ts, u8 command,
+				 u8 length, void *buf)
+{
+	int error;
+	int tries;
+
+	for (tries = 0; tries < CY_NUM_RETRY; tries++) {
+		error = ts->bus_ops->write(ts->dev, ts->xfer_buf, command,
+				length, buf);
+		if (!error)
+			return 0;
+
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return -EIO;
+}
+
+static int ttsp_send_command(struct cyttsp *ts, u8 cmd)
+{
+	return ttsp_write_block_data(ts, CY_REG_BASE, sizeof(cmd), &cmd);
+}
+
+static int cyttsp_handshake(struct cyttsp *ts)
+{
+	if (ts->pdata->use_hndshk)
+		return ttsp_send_command(ts,
+				ts->xy_data.hst_mode ^ CY_HNDSHK_BIT);
+
+	return 0;
+}
+
+static int cyttsp_load_bl_regs(struct cyttsp *ts)
+{
+	memset(&ts->bl_data, 0, sizeof(ts->bl_data));
+	ts->bl_data.bl_status = 0x10;
+
+	return ttsp_read_block_data(ts, CY_REG_BASE,
+				    sizeof(ts->bl_data), &ts->bl_data);
+}
+
+static int cyttsp_exit_bl_mode(struct cyttsp *ts)
+{
+	int error;
+	u8 bl_cmd[sizeof(bl_command)];
+
+	memcpy(bl_cmd, bl_command, sizeof(bl_command));
+	if (ts->pdata->bl_keys)
+		memcpy(&bl_cmd[sizeof(bl_command) - CY_NUM_BL_KEYS],
+			ts->pdata->bl_keys, CY_NUM_BL_KEYS);
+
+	error = ttsp_write_block_data(ts, CY_REG_BASE,
+				      sizeof(bl_cmd), bl_cmd);
+	if (error)
+		return error;
+
+	/* wait for TTSP Device to complete the operation */
+	msleep(CY_DELAY_DFLT);
+
+	error = cyttsp_load_bl_regs(ts);
+	if (error)
+		return error;
+
+	if (GET_BOOTLOADERMODE(ts->bl_data.bl_status))
+		return -EIO;
+
+	return 0;
+}
+
+static int cyttsp_set_operational_mode(struct cyttsp *ts)
+{
+	int error;
+
+	error = ttsp_send_command(ts, CY_OPERATE_MODE);
+	if (error)
+		return error;
+
+	/* wait for TTSP Device to complete switch to Operational mode */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				     sizeof(ts->xy_data), &ts->xy_data);
+	if (error)
+		return error;
+
+	error = cyttsp_handshake(ts);
+	if (error)
+		return error;
+
+	return ts->xy_data.act_dist == CY_ACT_DIST_DFLT ? -EIO : 0;
+}
+
+static int cyttsp_set_sysinfo_mode(struct cyttsp *ts)
+{
+	int error;
+
+	memset(&ts->sysinfo_data, 0, sizeof(ts->sysinfo_data));
+
+	/* switch to sysinfo mode */
+	error = ttsp_send_command(ts, CY_SYSINFO_MODE);
+	if (error)
+		return error;
+
+	/* read sysinfo registers */
+	msleep(CY_DELAY_DFLT);
+	error = ttsp_read_block_data(ts, CY_REG_BASE, sizeof(ts->sysinfo_data),
+				      &ts->sysinfo_data);
+	if (error)
+		return error;
+
+	error = cyttsp_handshake(ts);
+	if (error)
+		return error;
+
+	if (!ts->sysinfo_data.tts_verh && !ts->sysinfo_data.tts_verl)
+		return -EIO;
+
+	return 0;
+}
+
+static int cyttsp_set_sysinfo_regs(struct cyttsp *ts)
+{
+	int retval = 0;
+
+	if (ts->pdata->act_intrvl != CY_ACT_INTRVL_DFLT ||
+	    ts->pdata->tch_tmout != CY_TCH_TMOUT_DFLT ||
+	    ts->pdata->lp_intrvl != CY_LP_INTRVL_DFLT) {
+
+		u8 intrvl_ray[] = {
+			ts->pdata->act_intrvl,
+			ts->pdata->tch_tmout,
+			ts->pdata->lp_intrvl
+		};
+
+		/* set intrvl registers */
+		retval = ttsp_write_block_data(ts, CY_REG_ACT_INTRVL,
+					sizeof(intrvl_ray), intrvl_ray);
+		msleep(CY_DELAY_DFLT);
+	}
+
+	return retval;
+}
+
+static int cyttsp_soft_reset(struct cyttsp *ts)
+{
+	unsigned long timeout;
+	int retval;
+
+	/* wait for interrupt to set ready completion */
+	reinit_completion(&ts->bl_ready);
+	ts->state = CY_BL_STATE;
+
+	enable_irq(ts->irq);
+
+	retval = ttsp_send_command(ts, CY_SOFT_RESET_MODE);
+	if (retval)
+		goto out;
+
+	timeout = wait_for_completion_timeout(&ts->bl_ready,
+			msecs_to_jiffies(CY_DELAY_DFLT * CY_DELAY_MAX));
+	retval = timeout ? 0 : -EIO;
+
+out:
+	ts->state = CY_IDLE_STATE;
+	disable_irq(ts->irq);
+	return retval;
+}
+
+static int cyttsp_act_dist_setup(struct cyttsp *ts)
+{
+	u8 act_dist_setup = ts->pdata->act_dist;
+
+	/* Init gesture; active distance setup */
+	return ttsp_write_block_data(ts, CY_REG_ACT_DIST,
+				sizeof(act_dist_setup), &act_dist_setup);
+}
+
+static void cyttsp_extract_track_ids(struct cyttsp_xydata *xy_data, int *ids)
+{
+	ids[0] = xy_data->touch12_id >> 4;
+	ids[1] = xy_data->touch12_id & 0xF;
+	ids[2] = xy_data->touch34_id >> 4;
+	ids[3] = xy_data->touch34_id & 0xF;
+}
+
+static const struct cyttsp_tch *cyttsp_get_tch(struct cyttsp_xydata *xy_data,
+					       int idx)
+{
+	switch (idx) {
+	case 0:
+		return &xy_data->tch1;
+	case 1:
+		return &xy_data->tch2;
+	case 2:
+		return &xy_data->tch3;
+	case 3:
+		return &xy_data->tch4;
+	default:
+		return NULL;
+	}
+}
+
+static void cyttsp_report_tchdata(struct cyttsp *ts)
+{
+	struct cyttsp_xydata *xy_data = &ts->xy_data;
+	struct input_dev *input = ts->input;
+	int num_tch = GET_NUM_TOUCHES(xy_data->tt_stat);
+	const struct cyttsp_tch *tch;
+	int ids[CY_MAX_ID];
+	int i;
+	DECLARE_BITMAP(used, CY_MAX_ID);
+
+	if (IS_LARGE_AREA(xy_data->tt_stat) == 1) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Large area detected\n", __func__);
+	} else if (num_tch > CY_MAX_FINGER) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Num touch error detected\n", __func__);
+	} else if (IS_BAD_PKT(xy_data->tt_mode)) {
+		/* terminate all active tracks */
+		num_tch = 0;
+		dev_dbg(ts->dev, "%s: Invalid buffer detected\n", __func__);
+	}
+
+	cyttsp_extract_track_ids(xy_data, ids);
+
+	bitmap_zero(used, CY_MAX_ID);
+
+	for (i = 0; i < num_tch; i++) {
+		tch = cyttsp_get_tch(xy_data, i);
+
+		input_mt_slot(input, ids[i]);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+		input_report_abs(input, ABS_MT_POSITION_X, be16_to_cpu(tch->x));
+		input_report_abs(input, ABS_MT_POSITION_Y, be16_to_cpu(tch->y));
+		input_report_abs(input, ABS_MT_TOUCH_MAJOR, tch->z);
+
+		__set_bit(ids[i], used);
+	}
+
+	for (i = 0; i < CY_MAX_ID; i++) {
+		if (test_bit(i, used))
+			continue;
+
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, false);
+	}
+
+	input_sync(input);
+}
+
+static irqreturn_t cyttsp_irq(int irq, void *handle)
+{
+	struct cyttsp *ts = handle;
+	int error;
+
+	if (unlikely(ts->state == CY_BL_STATE)) {
+		complete(&ts->bl_ready);
+		goto out;
+	}
+
+	/* Get touch data from CYTTSP device */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				 sizeof(struct cyttsp_xydata), &ts->xy_data);
+	if (error)
+		goto out;
+
+	/* provide flow control handshake */
+	error = cyttsp_handshake(ts);
+	if (error)
+		goto out;
+
+	if (unlikely(ts->state == CY_IDLE_STATE))
+		goto out;
+
+	if (GET_BOOTLOADERMODE(ts->xy_data.tt_mode)) {
+		/*
+		 * TTSP device has reset back to bootloader mode.
+		 * Restore to operational mode.
+		 */
+		error = cyttsp_exit_bl_mode(ts);
+		if (error) {
+			dev_err(ts->dev,
+				"Could not return to operational mode, err: %d\n",
+				error);
+			ts->state = CY_IDLE_STATE;
+		}
+	} else {
+		cyttsp_report_tchdata(ts);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int cyttsp_power_on(struct cyttsp *ts)
+{
+	int error;
+
+	error = cyttsp_soft_reset(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_load_bl_regs(ts);
+	if (error)
+		return error;
+
+	if (GET_BOOTLOADERMODE(ts->bl_data.bl_status) &&
+	    IS_VALID_APP(ts->bl_data.bl_status)) {
+		error = cyttsp_exit_bl_mode(ts);
+		if (error)
+			return error;
+	}
+
+	if (GET_HSTMODE(ts->bl_data.bl_file) != CY_OPERATE_MODE ||
+	    IS_OPERATIONAL_ERR(ts->bl_data.bl_status)) {
+		return -ENODEV;
+	}
+
+	error = cyttsp_set_sysinfo_mode(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_set_sysinfo_regs(ts);
+	if (error)
+		return error;
+
+	error = cyttsp_set_operational_mode(ts);
+	if (error)
+		return error;
+
+	/* init active distance */
+	error = cyttsp_act_dist_setup(ts);
+	if (error)
+		return error;
+
+	ts->state = CY_ACTIVE_STATE;
+
+	return 0;
+}
+
+static int cyttsp_enable(struct cyttsp *ts)
+{
+	int error;
+
+	/*
+	 * The device firmware can wake on an I2C or SPI memory slave
+	 * address match. So just reading a register is sufficient to
+	 * wake up the device. The first read attempt will fail but it
+	 * will wake it up making the second read attempt successful.
+	 */
+	error = ttsp_read_block_data(ts, CY_REG_BASE,
+				     sizeof(ts->xy_data), &ts->xy_data);
+	if (error)
+		return error;
+
+	if (GET_HSTMODE(ts->xy_data.hst_mode))
+		return -EIO;
+
+	enable_irq(ts->irq);
+
+	return 0;
+}
+
+static int cyttsp_disable(struct cyttsp *ts)
+{
+	int error;
+
+	error = ttsp_send_command(ts, CY_LOW_POWER_MODE);
+	if (error)
+		return error;
+
+	disable_irq(ts->irq);
+
+	return 0;
+}
+
+static int __maybe_unused cyttsp_suspend(struct device *dev)
+{
+	struct cyttsp *ts = dev_get_drvdata(dev);
+	int retval = 0;
+
+	mutex_lock(&ts->input->mutex);
+
+	if (ts->input->users) {
+		retval = cyttsp_disable(ts);
+		if (retval == 0)
+			ts->suspended = true;
+	}
+
+	mutex_unlock(&ts->input->mutex);
+
+	return retval;
+}
+
+static int __maybe_unused cyttsp_resume(struct device *dev)
+{
+	struct cyttsp *ts = dev_get_drvdata(dev);
+
+	mutex_lock(&ts->input->mutex);
+
+	if (ts->input->users)
+		cyttsp_enable(ts);
+
+	ts->suspended = false;
+
+	mutex_unlock(&ts->input->mutex);
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(cyttsp_pm_ops, cyttsp_suspend, cyttsp_resume);
+EXPORT_SYMBOL_GPL(cyttsp_pm_ops);
+
+static int cyttsp_open(struct input_dev *dev)
+{
+	struct cyttsp *ts = input_get_drvdata(dev);
+	int retval = 0;
+
+	if (!ts->suspended)
+		retval = cyttsp_enable(ts);
+
+	return retval;
+}
+
+static void cyttsp_close(struct input_dev *dev)
+{
+	struct cyttsp *ts = input_get_drvdata(dev);
+
+	if (!ts->suspended)
+		cyttsp_disable(ts);
+}
+
+struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
+			    struct device *dev, int irq, size_t xfer_buf_size)
+{
+	const struct cyttsp_platform_data *pdata = dev_get_platdata(dev);
+	struct cyttsp *ts;
+	struct input_dev *input_dev;
+	int error;
+
+	if (!pdata || !pdata->name || irq <= 0) {
+		error = -EINVAL;
+		goto err_out;
+	}
+
+	ts = kzalloc(sizeof(*ts) + xfer_buf_size, GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	ts->dev = dev;
+	ts->input = input_dev;
+	ts->pdata = dev_get_platdata(dev);
+	ts->bus_ops = bus_ops;
+	ts->irq = irq;
+
+	init_completion(&ts->bl_ready);
+	snprintf(ts->phys, sizeof(ts->phys), "%s/input0", dev_name(dev));
+
+	if (pdata->init) {
+		error = pdata->init();
+		if (error) {
+			dev_err(ts->dev, "platform init failed, err: %d\n",
+				error);
+			goto err_free_mem;
+		}
+	}
+
+	input_dev->name = pdata->name;
+	input_dev->phys = ts->phys;
+	input_dev->id.bustype = bus_ops->bustype;
+	input_dev->dev.parent = ts->dev;
+
+	input_dev->open = cyttsp_open;
+	input_dev->close = cyttsp_close;
+
+	input_set_drvdata(input_dev, ts);
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, pdata->maxx, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, pdata->maxy, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, CY_MAXZ, 0, 0);
+
+	input_mt_init_slots(input_dev, CY_MAX_ID, 0);
+
+	error = request_threaded_irq(ts->irq, NULL, cyttsp_irq,
+				     IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+				     pdata->name, ts);
+	if (error) {
+		dev_err(ts->dev, "failed to request IRQ %d, err: %d\n",
+			ts->irq, error);
+		goto err_platform_exit;
+	}
+
+	disable_irq(ts->irq);
+
+	error = cyttsp_power_on(ts);
+	if (error)
+		goto err_free_irq;
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(ts->dev, "failed to register input device: %d\n",
+			error);
+		goto err_free_irq;
+	}
+
+	return ts;
+
+err_free_irq:
+	free_irq(ts->irq, ts);
+err_platform_exit:
+	if (pdata->exit)
+		pdata->exit();
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts);
+err_out:
+	return ERR_PTR(error);
+}
+EXPORT_SYMBOL_GPL(cyttsp_probe);
+
+void cyttsp_remove(struct cyttsp *ts)
+{
+	free_irq(ts->irq, ts);
+	input_unregister_device(ts->input);
+	if (ts->pdata->exit)
+		ts->pdata->exit();
+	kfree(ts);
+}
+EXPORT_SYMBOL_GPL(cyttsp_remove);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard touchscreen driver core");
+MODULE_AUTHOR("Cypress");
diff --git a/drivers/input/touchscreen/cyttsp_core.h b/drivers/input/touchscreen/cyttsp_core.h
new file mode 100644
index 0000000..0707411
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_core.h
@@ -0,0 +1,154 @@
+/*
+ * Header file for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) touchscreen drivers.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <kev@cypress.com>
+ *
+ */
+
+
+#ifndef __CYTTSP_CORE_H__
+#define __CYTTSP_CORE_H__
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/device.h>
+#include <linux/input/cyttsp.h>
+
+#define CY_NUM_RETRY		16 /* max number of retries for read ops */
+
+struct cyttsp_tch {
+	__be16 x, y;
+	u8 z;
+} __packed;
+
+/* TrueTouch Standard Product Gen3 interface definition */
+struct cyttsp_xydata {
+	u8 hst_mode;
+	u8 tt_mode;
+	u8 tt_stat;
+	struct cyttsp_tch tch1;
+	u8 touch12_id;
+	struct cyttsp_tch tch2;
+	u8 gest_cnt;
+	u8 gest_id;
+	struct cyttsp_tch tch3;
+	u8 touch34_id;
+	struct cyttsp_tch tch4;
+	u8 tt_undef[3];
+	u8 act_dist;
+	u8 tt_reserved;
+} __packed;
+
+
+/* TTSP System Information interface definition */
+struct cyttsp_sysinfo_data {
+	u8 hst_mode;
+	u8 mfg_stat;
+	u8 mfg_cmd;
+	u8 cid[3];
+	u8 tt_undef1;
+	u8 uid[8];
+	u8 bl_verh;
+	u8 bl_verl;
+	u8 tts_verh;
+	u8 tts_verl;
+	u8 app_idh;
+	u8 app_idl;
+	u8 app_verh;
+	u8 app_verl;
+	u8 tt_undef[5];
+	u8 scn_typ;
+	u8 act_intrvl;
+	u8 tch_tmout;
+	u8 lp_intrvl;
+};
+
+/* TTSP Bootloader Register Map interface definition */
+#define CY_BL_CHKSUM_OK 0x01
+struct cyttsp_bootloader_data {
+	u8 bl_file;
+	u8 bl_status;
+	u8 bl_error;
+	u8 blver_hi;
+	u8 blver_lo;
+	u8 bld_blver_hi;
+	u8 bld_blver_lo;
+	u8 ttspver_hi;
+	u8 ttspver_lo;
+	u8 appid_hi;
+	u8 appid_lo;
+	u8 appver_hi;
+	u8 appver_lo;
+	u8 cid_0;
+	u8 cid_1;
+	u8 cid_2;
+};
+
+struct cyttsp;
+
+struct cyttsp_bus_ops {
+	u16 bustype;
+	int (*write)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
+			const void *values);
+	int (*read)(struct device *dev, u8 *xfer_buf, u16 addr, u8 length,
+			void *values);
+};
+
+enum cyttsp_state {
+	CY_IDLE_STATE,
+	CY_ACTIVE_STATE,
+	CY_BL_STATE,
+};
+
+struct cyttsp {
+	struct device *dev;
+	int irq;
+	struct input_dev *input;
+	char phys[32];
+	const struct cyttsp_platform_data *pdata;
+	const struct cyttsp_bus_ops *bus_ops;
+	struct cyttsp_bootloader_data bl_data;
+	struct cyttsp_sysinfo_data sysinfo_data;
+	struct cyttsp_xydata xy_data;
+	struct completion bl_ready;
+	enum cyttsp_state state;
+	bool suspended;
+
+	u8 xfer_buf[] ____cacheline_aligned;
+};
+
+struct cyttsp *cyttsp_probe(const struct cyttsp_bus_ops *bus_ops,
+			    struct device *dev, int irq, size_t xfer_buf_size);
+void cyttsp_remove(struct cyttsp *ts);
+
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
+		u8 length, const void *values);
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf, u16 addr,
+		u8 length, void *values);
+extern const struct dev_pm_ops cyttsp_pm_ops;
+
+#endif /* __CYTTSP_CORE_H__ */
diff --git a/drivers/input/touchscreen/cyttsp_i2c.c b/drivers/input/touchscreen/cyttsp_i2c.c
new file mode 100644
index 0000000..eee51b3
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_i2c.c
@@ -0,0 +1,88 @@
+/*
+ * cyttsp_i2c.c
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+
+#define CY_I2C_DATA_SIZE	128
+
+static const struct cyttsp_bus_ops cyttsp_i2c_bus_ops = {
+	.bustype	= BUS_I2C,
+	.write		= cyttsp_i2c_write_block_data,
+	.read           = cyttsp_i2c_read_block_data,
+};
+
+static int cyttsp_i2c_probe(struct i2c_client *client,
+				      const struct i2c_device_id *id)
+{
+	struct cyttsp *ts;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "I2C functionality not Supported\n");
+		return -EIO;
+	}
+
+	ts = cyttsp_probe(&cyttsp_i2c_bus_ops, &client->dev, client->irq,
+			  CY_I2C_DATA_SIZE);
+
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	i2c_set_clientdata(client, ts);
+	return 0;
+}
+
+static int cyttsp_i2c_remove(struct i2c_client *client)
+{
+	struct cyttsp *ts = i2c_get_clientdata(client);
+
+	cyttsp_remove(ts);
+
+	return 0;
+}
+
+static const struct i2c_device_id cyttsp_i2c_id[] = {
+	{ CY_I2C_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, cyttsp_i2c_id);
+
+static struct i2c_driver cyttsp_i2c_driver = {
+	.driver = {
+		.name	= CY_I2C_NAME,
+		.pm	= &cyttsp_pm_ops,
+	},
+	.probe		= cyttsp_i2c_probe,
+	.remove		= cyttsp_i2c_remove,
+	.id_table	= cyttsp_i2c_id,
+};
+
+module_i2c_driver(cyttsp_i2c_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) I2C driver");
+MODULE_AUTHOR("Cypress");
diff --git a/drivers/input/touchscreen/cyttsp_i2c_common.c b/drivers/input/touchscreen/cyttsp_i2c_common.c
new file mode 100644
index 0000000..ccefa56
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_i2c_common.c
@@ -0,0 +1,95 @@
+/*
+ * cyttsp_i2c_common.c
+ * Cypress TrueTouch(TM) Standard Product (TTSP) I2C touchscreen driver.
+ * For use with Cypress Txx3xx and Txx4xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ * TMA4XX
+ * TMA1036
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#include "cyttsp4_core.h"
+
+int cyttsp_i2c_read_block_data(struct device *dev, u8 *xfer_buf,
+				      u16 addr, u8 length, void *values)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 client_addr = client->addr | ((addr >> 8) & 0x1);
+	u8 addr_lo = addr & 0xFF;
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client_addr,
+			.flags = 0,
+			.len = 1,
+			.buf = &addr_lo,
+		},
+		{
+			.addr = client_addr,
+			.flags = I2C_M_RD,
+			.len = length,
+			.buf = values,
+		},
+	};
+	int retval;
+
+	retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (retval < 0)
+		return retval;
+
+	return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(cyttsp_i2c_read_block_data);
+
+int cyttsp_i2c_write_block_data(struct device *dev, u8 *xfer_buf,
+				       u16 addr, u8 length, const void *values)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	u8 client_addr = client->addr | ((addr >> 8) & 0x1);
+	u8 addr_lo = addr & 0xFF;
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client_addr,
+			.flags = 0,
+			.len = length + 1,
+			.buf = xfer_buf,
+		},
+	};
+	int retval;
+
+	xfer_buf[0] = addr_lo;
+	memcpy(&xfer_buf[1], values, length);
+
+	retval = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (retval < 0)
+		return retval;
+
+	return retval != ARRAY_SIZE(msgs) ? -EIO : 0;
+}
+EXPORT_SYMBOL_GPL(cyttsp_i2c_write_block_data);
+
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cypress");
diff --git a/drivers/input/touchscreen/cyttsp_spi.c b/drivers/input/touchscreen/cyttsp_spi.c
new file mode 100644
index 0000000..bbeeb24
--- /dev/null
+++ b/drivers/input/touchscreen/cyttsp_spi.c
@@ -0,0 +1,196 @@
+/*
+ * Source for:
+ * Cypress TrueTouch(TM) Standard Product (TTSP) SPI touchscreen driver.
+ * For use with Cypress Txx3xx parts.
+ * Supported parts include:
+ * CY8CTST341
+ * CY8CTMA340
+ *
+ * Copyright (C) 2009, 2010, 2011 Cypress Semiconductor, Inc.
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@dowhile0.org>
+ * Copyright (C) 2013 Cypress Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2, and only version 2, as published by the
+ * Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * Contact Cypress Semiconductor at www.cypress.com <ttdrivers@cypress.com>
+ *
+ */
+
+#include "cyttsp_core.h"
+
+#include <linux/delay.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+
+#define CY_SPI_WR_OP		0x00 /* r/~w */
+#define CY_SPI_RD_OP		0x01
+#define CY_SPI_CMD_BYTES	4
+#define CY_SPI_SYNC_BYTE	2
+#define CY_SPI_SYNC_ACK1	0x62 /* from protocol v.2 */
+#define CY_SPI_SYNC_ACK2	0x9D /* from protocol v.2 */
+#define CY_SPI_DATA_SIZE	128
+#define CY_SPI_DATA_BUF_SIZE	(CY_SPI_CMD_BYTES + CY_SPI_DATA_SIZE)
+#define CY_SPI_BITS_PER_WORD	8
+
+static int cyttsp_spi_xfer(struct device *dev, u8 *xfer_buf,
+			   u8 op, u16 reg, u8 *buf, int length)
+{
+	struct spi_device *spi = to_spi_device(dev);
+	struct spi_message msg;
+	struct spi_transfer xfer[2];
+	u8 *wr_buf = &xfer_buf[0];
+	u8 *rd_buf = &xfer_buf[CY_SPI_DATA_BUF_SIZE];
+	int retval;
+	int i;
+
+	if (length > CY_SPI_DATA_SIZE) {
+		dev_err(dev, "%s: length %d is too big.\n",
+			__func__, length);
+		return -EINVAL;
+	}
+
+	memset(wr_buf, 0, CY_SPI_DATA_BUF_SIZE);
+	memset(rd_buf, 0, CY_SPI_DATA_BUF_SIZE);
+
+	wr_buf[0] = 0x00; /* header byte 0 */
+	wr_buf[1] = 0xFF; /* header byte 1 */
+	wr_buf[2] = reg;  /* reg index */
+	wr_buf[3] = op;   /* r/~w */
+	if (op == CY_SPI_WR_OP)
+		memcpy(wr_buf + CY_SPI_CMD_BYTES, buf, length);
+
+	memset(xfer, 0, sizeof(xfer));
+	spi_message_init(&msg);
+
+	/*
+	  We set both TX and RX buffers because Cypress TTSP
+	  requires full duplex operation.
+	*/
+	xfer[0].tx_buf = wr_buf;
+	xfer[0].rx_buf = rd_buf;
+	switch (op) {
+	case CY_SPI_WR_OP:
+		xfer[0].len = length + CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+		break;
+
+	case CY_SPI_RD_OP:
+		xfer[0].len = CY_SPI_CMD_BYTES;
+		spi_message_add_tail(&xfer[0], &msg);
+
+		xfer[1].rx_buf = buf;
+		xfer[1].len = length;
+		spi_message_add_tail(&xfer[1], &msg);
+		break;
+
+	default:
+		dev_err(dev, "%s: bad operation code=%d\n", __func__, op);
+		return -EINVAL;
+	}
+
+	retval = spi_sync(spi, &msg);
+	if (retval < 0) {
+		dev_dbg(dev, "%s: spi_sync() error %d, len=%d, op=%d\n",
+			__func__, retval, xfer[1].len, op);
+
+		/*
+		 * do not return here since was a bad ACK sequence
+		 * let the following ACK check handle any errors and
+		 * allow silent retries
+		 */
+	}
+
+	if (rd_buf[CY_SPI_SYNC_BYTE] != CY_SPI_SYNC_ACK1 ||
+	    rd_buf[CY_SPI_SYNC_BYTE + 1] != CY_SPI_SYNC_ACK2) {
+		dev_dbg(dev, "%s: operation %d failed\n", __func__, op);
+
+		for (i = 0; i < CY_SPI_CMD_BYTES; i++)
+			dev_dbg(dev, "%s: test rd_buf[%d]:0x%02x\n",
+				__func__, i, rd_buf[i]);
+		for (i = 0; i < length; i++)
+			dev_dbg(dev, "%s: test buf[%d]:0x%02x\n",
+				__func__, i, buf[i]);
+
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static int cyttsp_spi_read_block_data(struct device *dev, u8 *xfer_buf,
+				      u16 addr, u8 length, void *data)
+{
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_RD_OP, addr, data,
+			length);
+}
+
+static int cyttsp_spi_write_block_data(struct device *dev, u8 *xfer_buf,
+				       u16 addr, u8 length, const void *data)
+{
+	return cyttsp_spi_xfer(dev, xfer_buf, CY_SPI_WR_OP, addr, (void *)data,
+			length);
+}
+
+static const struct cyttsp_bus_ops cyttsp_spi_bus_ops = {
+	.bustype	= BUS_SPI,
+	.write		= cyttsp_spi_write_block_data,
+	.read		= cyttsp_spi_read_block_data,
+};
+
+static int cyttsp_spi_probe(struct spi_device *spi)
+{
+	struct cyttsp *ts;
+	int error;
+
+	/* Set up SPI*/
+	spi->bits_per_word = CY_SPI_BITS_PER_WORD;
+	spi->mode = SPI_MODE_0;
+	error = spi_setup(spi);
+	if (error < 0) {
+		dev_err(&spi->dev, "%s: SPI setup error %d\n",
+			__func__, error);
+		return error;
+	}
+
+	ts = cyttsp_probe(&cyttsp_spi_bus_ops, &spi->dev, spi->irq,
+			  CY_SPI_DATA_BUF_SIZE * 2);
+	if (IS_ERR(ts))
+		return PTR_ERR(ts);
+
+	spi_set_drvdata(spi, ts);
+
+	return 0;
+}
+
+static int cyttsp_spi_remove(struct spi_device *spi)
+{
+	struct cyttsp *ts = spi_get_drvdata(spi);
+
+	cyttsp_remove(ts);
+
+	return 0;
+}
+
+static struct spi_driver cyttsp_spi_driver = {
+	.driver = {
+		.name	= CY_SPI_NAME,
+		.pm	= &cyttsp_pm_ops,
+	},
+	.probe  = cyttsp_spi_probe,
+	.remove = cyttsp_spi_remove,
+};
+
+module_spi_driver(cyttsp_spi_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Cypress TrueTouch(R) Standard Product (TTSP) SPI driver");
+MODULE_AUTHOR("Cypress");
+MODULE_ALIAS("spi:cyttsp");
diff --git a/drivers/input/touchscreen/da9034-ts.c b/drivers/input/touchscreen/da9034-ts.c
new file mode 100644
index 0000000..8264822
--- /dev/null
+++ b/drivers/input/touchscreen/da9034-ts.c
@@ -0,0 +1,368 @@
+/*
+ * Touchscreen driver for Dialog Semiconductor DA9034
+ *
+ * Copyright (C) 2006-2008 Marvell International Ltd.
+ *	Fengwei Yin <fengwei.yin@marvell.com>
+ *	Bin Yang  <bin.yang@marvell.com>
+ *	Eric Miao <eric.miao@marvell.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/workqueue.h>
+#include <linux/mfd/da903x.h>
+#include <linux/slab.h>
+
+#define DA9034_MANUAL_CTRL	0x50
+#define DA9034_LDO_ADC_EN	(1 << 4)
+
+#define DA9034_AUTO_CTRL1	0x51
+
+#define DA9034_AUTO_CTRL2	0x52
+#define DA9034_AUTO_TSI_EN	(1 << 3)
+#define DA9034_PEN_DETECT	(1 << 4)
+
+#define DA9034_TSI_CTRL1	0x53
+#define DA9034_TSI_CTRL2	0x54
+#define DA9034_TSI_X_MSB	0x6c
+#define DA9034_TSI_Y_MSB	0x6d
+#define DA9034_TSI_XY_LSB	0x6e
+
+enum {
+	STATE_IDLE,	/* wait for pendown */
+	STATE_BUSY,	/* TSI busy sampling */
+	STATE_STOP,	/* sample available */
+	STATE_WAIT,	/* Wait to start next sample */
+};
+
+enum {
+	EVENT_PEN_DOWN,
+	EVENT_PEN_UP,
+	EVENT_TSI_READY,
+	EVENT_TIMEDOUT,
+};
+
+struct da9034_touch {
+	struct device		*da9034_dev;
+	struct input_dev	*input_dev;
+
+	struct delayed_work	tsi_work;
+	struct notifier_block	notifier;
+
+	int	state;
+
+	int	interval_ms;
+	int	x_inverted;
+	int	y_inverted;
+
+	int	last_x;
+	int	last_y;
+};
+
+static inline int is_pen_down(struct da9034_touch *touch)
+{
+	return da903x_query_status(touch->da9034_dev, DA9034_STATUS_PEN_DOWN);
+}
+
+static inline int detect_pen_down(struct da9034_touch *touch, int on)
+{
+	if (on)
+		return da903x_set_bits(touch->da9034_dev,
+				DA9034_AUTO_CTRL2, DA9034_PEN_DETECT);
+	else
+		return da903x_clr_bits(touch->da9034_dev,
+				DA9034_AUTO_CTRL2, DA9034_PEN_DETECT);
+}
+
+static int read_tsi(struct da9034_touch *touch)
+{
+	uint8_t _x, _y, _v;
+	int ret;
+
+	ret = da903x_read(touch->da9034_dev, DA9034_TSI_X_MSB, &_x);
+	if (ret)
+		return ret;
+
+	ret = da903x_read(touch->da9034_dev, DA9034_TSI_Y_MSB, &_y);
+	if (ret)
+		return ret;
+
+	ret = da903x_read(touch->da9034_dev, DA9034_TSI_XY_LSB, &_v);
+	if (ret)
+		return ret;
+
+	touch->last_x = ((_x << 2) & 0x3fc) | (_v & 0x3);
+	touch->last_y = ((_y << 2) & 0x3fc) | ((_v & 0xc) >> 2);
+
+	return 0;
+}
+
+static inline int start_tsi(struct da9034_touch *touch)
+{
+	return da903x_set_bits(touch->da9034_dev,
+			DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN);
+}
+
+static inline int stop_tsi(struct da9034_touch *touch)
+{
+	return da903x_clr_bits(touch->da9034_dev,
+			DA9034_AUTO_CTRL2, DA9034_AUTO_TSI_EN);
+}
+
+static inline void report_pen_down(struct da9034_touch *touch)
+{
+	int x = touch->last_x;
+	int y = touch->last_y;
+
+	x &= 0xfff;
+	if (touch->x_inverted)
+		x = 1024 - x;
+	y &= 0xfff;
+	if (touch->y_inverted)
+		y = 1024 - y;
+
+	input_report_abs(touch->input_dev, ABS_X, x);
+	input_report_abs(touch->input_dev, ABS_Y, y);
+	input_report_key(touch->input_dev, BTN_TOUCH, 1);
+
+	input_sync(touch->input_dev);
+}
+
+static inline void report_pen_up(struct da9034_touch *touch)
+{
+	input_report_key(touch->input_dev, BTN_TOUCH, 0);
+	input_sync(touch->input_dev);
+}
+
+static void da9034_event_handler(struct da9034_touch *touch, int event)
+{
+	int err;
+
+	switch (touch->state) {
+	case STATE_IDLE:
+		if (event != EVENT_PEN_DOWN)
+			break;
+
+		/* Enable auto measurement of the TSI, this will
+		 * automatically disable pen down detection
+		 */
+		err = start_tsi(touch);
+		if (err)
+			goto err_reset;
+
+		touch->state = STATE_BUSY;
+		break;
+
+	case STATE_BUSY:
+		if (event != EVENT_TSI_READY)
+			break;
+
+		err = read_tsi(touch);
+		if (err)
+			goto err_reset;
+
+		/* Disable auto measurement of the TSI, so that
+		 * pen down status will be available
+		 */
+		err = stop_tsi(touch);
+		if (err)
+			goto err_reset;
+
+		touch->state = STATE_STOP;
+
+		/* FIXME: PEN_{UP/DOWN} events are expected to be
+		 * available by stopping TSI, but this is found not
+		 * always true, delay and simulate such an event
+		 * here is more reliable
+		 */
+		mdelay(1);
+		da9034_event_handler(touch,
+				     is_pen_down(touch) ? EVENT_PEN_DOWN :
+							  EVENT_PEN_UP);
+		break;
+
+	case STATE_STOP:
+		if (event == EVENT_PEN_DOWN) {
+			report_pen_down(touch);
+			schedule_delayed_work(&touch->tsi_work,
+				msecs_to_jiffies(touch->interval_ms));
+			touch->state = STATE_WAIT;
+		}
+
+		if (event == EVENT_PEN_UP) {
+			report_pen_up(touch);
+			touch->state = STATE_IDLE;
+		}
+		break;
+
+	case STATE_WAIT:
+		if (event != EVENT_TIMEDOUT)
+			break;
+
+		if (is_pen_down(touch)) {
+			start_tsi(touch);
+			touch->state = STATE_BUSY;
+		} else {
+			report_pen_up(touch);
+			touch->state = STATE_IDLE;
+		}
+		break;
+	}
+	return;
+
+err_reset:
+	touch->state = STATE_IDLE;
+	stop_tsi(touch);
+	detect_pen_down(touch, 1);
+}
+
+static void da9034_tsi_work(struct work_struct *work)
+{
+	struct da9034_touch *touch =
+		container_of(work, struct da9034_touch, tsi_work.work);
+
+	da9034_event_handler(touch, EVENT_TIMEDOUT);
+}
+
+static int da9034_touch_notifier(struct notifier_block *nb,
+				 unsigned long event, void *data)
+{
+	struct da9034_touch *touch =
+		container_of(nb, struct da9034_touch, notifier);
+
+	if (event & DA9034_EVENT_TSI_READY)
+		da9034_event_handler(touch, EVENT_TSI_READY);
+
+	if ((event & DA9034_EVENT_PEN_DOWN) && touch->state == STATE_IDLE)
+		da9034_event_handler(touch, EVENT_PEN_DOWN);
+
+	return 0;
+}
+
+static int da9034_touch_open(struct input_dev *dev)
+{
+	struct da9034_touch *touch = input_get_drvdata(dev);
+	int ret;
+
+	ret = da903x_register_notifier(touch->da9034_dev, &touch->notifier,
+			DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY);
+	if (ret)
+		return -EBUSY;
+
+	/* Enable ADC LDO */
+	ret = da903x_set_bits(touch->da9034_dev,
+			DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN);
+	if (ret)
+		return ret;
+
+	/* TSI_DELAY: 3 slots, TSI_SKIP: 3 slots */
+	ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL1, 0x1b);
+	if (ret)
+		return ret;
+
+	ret = da903x_write(touch->da9034_dev, DA9034_TSI_CTRL2, 0x00);
+	if (ret)
+		return ret;
+
+	touch->state = STATE_IDLE;
+	detect_pen_down(touch, 1);
+
+	return 0;
+}
+
+static void da9034_touch_close(struct input_dev *dev)
+{
+	struct da9034_touch *touch = input_get_drvdata(dev);
+
+	da903x_unregister_notifier(touch->da9034_dev, &touch->notifier,
+			DA9034_EVENT_PEN_DOWN | DA9034_EVENT_TSI_READY);
+
+	cancel_delayed_work_sync(&touch->tsi_work);
+
+	touch->state = STATE_IDLE;
+	stop_tsi(touch);
+	detect_pen_down(touch, 0);
+
+	/* Disable ADC LDO */
+	da903x_clr_bits(touch->da9034_dev,
+			DA9034_MANUAL_CTRL, DA9034_LDO_ADC_EN);
+}
+
+
+static int da9034_touch_probe(struct platform_device *pdev)
+{
+	struct da9034_touch_pdata *pdata = dev_get_platdata(&pdev->dev);
+	struct da9034_touch *touch;
+	struct input_dev *input_dev;
+	int error;
+
+	touch = devm_kzalloc(&pdev->dev, sizeof(struct da9034_touch),
+			     GFP_KERNEL);
+	if (!touch) {
+		dev_err(&pdev->dev, "failed to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	touch->da9034_dev = pdev->dev.parent;
+
+	if (pdata) {
+		touch->interval_ms	= pdata->interval_ms;
+		touch->x_inverted	= pdata->x_inverted;
+		touch->y_inverted	= pdata->y_inverted;
+	} else {
+		/* fallback into default */
+		touch->interval_ms	= 10;
+	}
+
+	INIT_DELAYED_WORK(&touch->tsi_work, da9034_tsi_work);
+	touch->notifier.notifier_call = da9034_touch_notifier;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name		= pdev->name;
+	input_dev->open		= da9034_touch_open;
+	input_dev->close	= da9034_touch_close;
+	input_dev->dev.parent	= &pdev->dev;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(ABS_X, input_dev->absbit);
+	__set_bit(ABS_Y, input_dev->absbit);
+	input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	touch->input_dev = input_dev;
+	input_set_drvdata(input_dev, touch);
+
+	error = input_register_device(input_dev);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+static struct platform_driver da9034_touch_driver = {
+	.driver	= {
+		.name	= "da9034-touch",
+	},
+	.probe		= da9034_touch_probe,
+};
+module_platform_driver(da9034_touch_driver);
+
+MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9034");
+MODULE_AUTHOR("Eric Miao <eric.miao@marvell.com>, Bin Yang <bin.yang@marvell.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9034-touch");
diff --git a/drivers/input/touchscreen/da9052_tsi.c b/drivers/input/touchscreen/da9052_tsi.c
new file mode 100644
index 0000000..5a013bb
--- /dev/null
+++ b/drivers/input/touchscreen/da9052_tsi.c
@@ -0,0 +1,348 @@
+/*
+ * TSI driver for Dialog DA9052
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/da9052.h>
+
+#define TSI_PEN_DOWN_STATUS 0x40
+
+struct da9052_tsi {
+	struct da9052 *da9052;
+	struct input_dev *dev;
+	struct delayed_work ts_pen_work;
+	struct mutex mutex;
+	bool stopped;
+	bool adc_on;
+};
+
+static void da9052_ts_adc_toggle(struct da9052_tsi *tsi, bool on)
+{
+	da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 0, on);
+	tsi->adc_on = on;
+}
+
+static irqreturn_t da9052_ts_pendwn_irq(int irq, void *data)
+{
+	struct da9052_tsi *tsi = data;
+
+	if (!tsi->stopped) {
+		/* Mask PEN_DOWN event and unmask TSI_READY event */
+		da9052_disable_irq_nosync(tsi->da9052, DA9052_IRQ_PENDOWN);
+		da9052_enable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
+
+		da9052_ts_adc_toggle(tsi, true);
+
+		schedule_delayed_work(&tsi->ts_pen_work, HZ / 50);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void da9052_ts_read(struct da9052_tsi *tsi)
+{
+	struct input_dev *input = tsi->dev;
+	int ret;
+	u16 x, y, z;
+	u8 v;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_X_MSB_REG);
+	if (ret < 0)
+		return;
+
+	x = (u16) ret;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Y_MSB_REG);
+	if (ret < 0)
+		return;
+
+	y = (u16) ret;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_Z_MSB_REG);
+	if (ret < 0)
+		return;
+
+	z = (u16) ret;
+
+	ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG);
+	if (ret < 0)
+		return;
+
+	v = (u8) ret;
+
+	x = ((x << 2) & 0x3fc) | (v & 0x3);
+	y = ((y << 2) & 0x3fc) | ((v & 0xc) >> 2);
+	z = ((z << 2) & 0x3fc) | ((v & 0x30) >> 4);
+
+	input_report_key(input, BTN_TOUCH, 1);
+	input_report_abs(input, ABS_X, x);
+	input_report_abs(input, ABS_Y, y);
+	input_report_abs(input, ABS_PRESSURE, z);
+	input_sync(input);
+}
+
+static irqreturn_t da9052_ts_datardy_irq(int irq, void *data)
+{
+	struct da9052_tsi *tsi = data;
+
+	da9052_ts_read(tsi);
+
+	return IRQ_HANDLED;
+}
+
+static void da9052_ts_pen_work(struct work_struct *work)
+{
+	struct da9052_tsi *tsi = container_of(work, struct da9052_tsi,
+					      ts_pen_work.work);
+	if (!tsi->stopped) {
+		int ret = da9052_reg_read(tsi->da9052, DA9052_TSI_LSB_REG);
+		if (ret < 0 || (ret & TSI_PEN_DOWN_STATUS)) {
+			/* Pen is still DOWN (or read error) */
+			schedule_delayed_work(&tsi->ts_pen_work, HZ / 50);
+		} else {
+			struct input_dev *input = tsi->dev;
+
+			/* Pen UP */
+			da9052_ts_adc_toggle(tsi, false);
+
+			/* Report Pen UP */
+			input_report_key(input, BTN_TOUCH, 0);
+			input_report_abs(input, ABS_PRESSURE, 0);
+			input_sync(input);
+
+			/*
+			 * FIXME: Fixes the unhandled irq issue when quick
+			 * pen down and pen up events occurs
+			 */
+			ret = da9052_reg_update(tsi->da9052,
+						DA9052_EVENT_B_REG, 0xC0, 0xC0);
+			if (ret < 0)
+				return;
+
+			/* Mask TSI_READY event and unmask PEN_DOWN event */
+			da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
+			da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
+		}
+	}
+}
+
+static int da9052_ts_configure_gpio(struct da9052 *da9052)
+{
+	int error;
+
+	error = da9052_reg_update(da9052, DA9052_GPIO_2_3_REG, 0x30, 0);
+	if (error < 0)
+		return error;
+
+	error = da9052_reg_update(da9052, DA9052_GPIO_4_5_REG, 0x33, 0);
+	if (error < 0)
+		return error;
+
+	error = da9052_reg_update(da9052, DA9052_GPIO_6_7_REG, 0x33, 0);
+	if (error < 0)
+		return error;
+
+	return 0;
+}
+
+static int da9052_configure_tsi(struct da9052_tsi *tsi)
+{
+	int error;
+
+	error = da9052_ts_configure_gpio(tsi->da9052);
+	if (error)
+		return error;
+
+	/* Measure TSI sample every 1ms */
+	error = da9052_reg_update(tsi->da9052, DA9052_ADC_CONT_REG,
+				  1 << 6, 1 << 6);
+	if (error < 0)
+		return error;
+
+	/* TSI_DELAY: 3 slots, TSI_SKIP: 0 slots, TSI_MODE: XYZP */
+	error = da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 0xFC, 0xC0);
+	if (error < 0)
+		return error;
+
+	/* Supply TSIRef through LD09 */
+	error = da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x59);
+	if (error < 0)
+		return error;
+
+	return 0;
+}
+
+static int da9052_ts_input_open(struct input_dev *input_dev)
+{
+	struct da9052_tsi *tsi = input_get_drvdata(input_dev);
+
+	tsi->stopped = false;
+	mb();
+
+	/* Unmask PEN_DOWN event */
+	da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
+
+	/* Enable Pen Detect Circuit */
+	return da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG,
+				 1 << 1, 1 << 1);
+}
+
+static void da9052_ts_input_close(struct input_dev *input_dev)
+{
+	struct da9052_tsi *tsi = input_get_drvdata(input_dev);
+
+	tsi->stopped = true;
+	mb();
+	da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
+	cancel_delayed_work_sync(&tsi->ts_pen_work);
+
+	if (tsi->adc_on) {
+		da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
+		da9052_ts_adc_toggle(tsi, false);
+
+		/*
+		 * If ADC was on that means that pendwn IRQ was disabled
+		 * twice and we need to enable it to keep enable/disable
+		 * counter balanced. IRQ is still off though.
+		 */
+		da9052_enable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
+	}
+
+	/* Disable Pen Detect Circuit */
+	da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0);
+}
+
+static int da9052_ts_probe(struct platform_device *pdev)
+{
+	struct da9052 *da9052;
+	struct da9052_tsi *tsi;
+	struct input_dev *input_dev;
+	int error;
+
+	da9052 = dev_get_drvdata(pdev->dev.parent);
+	if (!da9052)
+		return -EINVAL;
+
+	tsi = kzalloc(sizeof(struct da9052_tsi), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!tsi || !input_dev) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tsi->da9052 = da9052;
+	tsi->dev = input_dev;
+	tsi->stopped = true;
+	INIT_DELAYED_WORK(&tsi->ts_pen_work, da9052_ts_pen_work);
+
+	input_dev->id.version = 0x0101;
+	input_dev->id.vendor = 0x15B6;
+	input_dev->id.product = 0x9052;
+	input_dev->name = "Dialog DA9052 TouchScreen Driver";
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = da9052_ts_input_open;
+	input_dev->close = da9052_ts_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 1023, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, 1023, 0, 0);
+
+	input_set_drvdata(input_dev, tsi);
+
+	/* Disable Pen Detect Circuit */
+	da9052_reg_update(tsi->da9052, DA9052_TSI_CONT_A_REG, 1 << 1, 0);
+
+	/* Disable ADC */
+	da9052_ts_adc_toggle(tsi, false);
+
+	error = da9052_request_irq(tsi->da9052, DA9052_IRQ_PENDOWN,
+				"pendown-irq", da9052_ts_pendwn_irq, tsi);
+	if (error) {
+		dev_err(tsi->da9052->dev,
+			"Failed to register PENDWN IRQ: %d\n", error);
+		goto err_free_mem;
+	}
+
+	error = da9052_request_irq(tsi->da9052, DA9052_IRQ_TSIREADY,
+				"tsiready-irq", da9052_ts_datardy_irq, tsi);
+	if (error) {
+		dev_err(tsi->da9052->dev,
+			"Failed to register TSIRDY IRQ :%d\n", error);
+		goto err_free_pendwn_irq;
+	}
+
+	/* Mask PEN_DOWN and TSI_READY events */
+	da9052_disable_irq(tsi->da9052, DA9052_IRQ_PENDOWN);
+	da9052_disable_irq(tsi->da9052, DA9052_IRQ_TSIREADY);
+
+	error = da9052_configure_tsi(tsi);
+	if (error)
+		goto err_free_datardy_irq;
+
+	error = input_register_device(tsi->dev);
+	if (error)
+		goto err_free_datardy_irq;
+
+	platform_set_drvdata(pdev, tsi);
+
+	return 0;
+
+err_free_datardy_irq:
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi);
+err_free_pendwn_irq:
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi);
+err_free_mem:
+	kfree(tsi);
+	input_free_device(input_dev);
+
+	return error;
+}
+
+static int  da9052_ts_remove(struct platform_device *pdev)
+{
+	struct da9052_tsi *tsi = platform_get_drvdata(pdev);
+
+	da9052_reg_write(tsi->da9052, DA9052_LDO9_REG, 0x19);
+
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_TSIREADY, tsi);
+	da9052_free_irq(tsi->da9052, DA9052_IRQ_PENDOWN, tsi);
+
+	input_unregister_device(tsi->dev);
+	kfree(tsi);
+
+	return 0;
+}
+
+static struct platform_driver da9052_tsi_driver = {
+	.probe	= da9052_ts_probe,
+	.remove	= da9052_ts_remove,
+	.driver	= {
+		.name	= "da9052-tsi",
+	},
+};
+
+module_platform_driver(da9052_tsi_driver);
+
+MODULE_DESCRIPTION("Touchscreen driver for Dialog Semiconductor DA9052");
+MODULE_AUTHOR("Anthony Olech <Anthony.Olech@diasemi.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-tsi");
diff --git a/drivers/input/touchscreen/dynapro.c b/drivers/input/touchscreen/dynapro.c
new file mode 100644
index 0000000..86237a9
--- /dev/null
+++ b/drivers/input/touchscreen/dynapro.c
@@ -0,0 +1,190 @@
+/*
+ * Dynapro serial touchscreen driver
+ *
+ * Copyright (c) 2009 Tias Guns
+ * Based on the inexio driver (c) Vojtech Pavlik and Dan Streetman and
+ * Richard Lemon
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2009/09/19 Tias Guns <tias@ulyssis.org>
+ *   Copied inexio.c and edited for Dynapro protocol (from retired Xorg module)
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Dynapro serial touchscreen driver"
+
+MODULE_AUTHOR("Tias Guns <tias@ulyssis.org>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define DYNAPRO_FORMAT_TOUCH_BIT 0x40
+#define DYNAPRO_FORMAT_LENGTH 3
+#define DYNAPRO_RESPONSE_BEGIN_BYTE 0x80
+
+#define DYNAPRO_MIN_XC 0
+#define DYNAPRO_MAX_XC 0x3ff
+#define DYNAPRO_MIN_YC 0
+#define DYNAPRO_MAX_YC 0x3ff
+
+#define DYNAPRO_GET_XC(data) (data[1] | ((data[0] & 0x38) << 4))
+#define DYNAPRO_GET_YC(data) (data[2] | ((data[0] & 0x07) << 7))
+#define DYNAPRO_GET_TOUCHED(data) (DYNAPRO_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct dynapro {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[DYNAPRO_FORMAT_LENGTH];
+	char phys[32];
+};
+
+static void dynapro_process_data(struct dynapro *pdynapro)
+{
+	struct input_dev *dev = pdynapro->dev;
+
+	if (DYNAPRO_FORMAT_LENGTH == ++pdynapro->idx) {
+		input_report_abs(dev, ABS_X, DYNAPRO_GET_XC(pdynapro->data));
+		input_report_abs(dev, ABS_Y, DYNAPRO_GET_YC(pdynapro->data));
+		input_report_key(dev, BTN_TOUCH,
+				 DYNAPRO_GET_TOUCHED(pdynapro->data));
+		input_sync(dev);
+
+		pdynapro->idx = 0;
+	}
+}
+
+static irqreturn_t dynapro_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct dynapro *pdynapro = serio_get_drvdata(serio);
+
+	pdynapro->data[pdynapro->idx] = data;
+
+	if (DYNAPRO_RESPONSE_BEGIN_BYTE & pdynapro->data[0])
+		dynapro_process_data(pdynapro);
+	else
+		dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+			pdynapro->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+static void dynapro_disconnect(struct serio *serio)
+{
+	struct dynapro *pdynapro = serio_get_drvdata(serio);
+
+	input_get_device(pdynapro->dev);
+	input_unregister_device(pdynapro->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(pdynapro->dev);
+	kfree(pdynapro);
+}
+
+/*
+ * dynapro_connect() is the routine that is called when someone adds a
+ * new serio device that supports dynapro protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int dynapro_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct dynapro *pdynapro;
+	struct input_dev *input_dev;
+	int err;
+
+	pdynapro = kzalloc(sizeof(struct dynapro), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!pdynapro || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	pdynapro->serio = serio;
+	pdynapro->dev = input_dev;
+	snprintf(pdynapro->phys, sizeof(pdynapro->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "Dynapro Serial TouchScreen";
+	input_dev->phys = pdynapro->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_DYNAPRO;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(pdynapro->dev, ABS_X,
+			     DYNAPRO_MIN_XC, DYNAPRO_MAX_XC, 0, 0);
+	input_set_abs_params(pdynapro->dev, ABS_Y,
+			     DYNAPRO_MIN_YC, DYNAPRO_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, pdynapro);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(pdynapro->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(pdynapro);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id dynapro_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_DYNAPRO,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, dynapro_serio_ids);
+
+static struct serio_driver dynapro_drv = {
+	.driver		= {
+		.name	= "dynapro",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= dynapro_serio_ids,
+	.interrupt	= dynapro_interrupt,
+	.connect	= dynapro_connect,
+	.disconnect	= dynapro_disconnect,
+};
+
+module_serio_driver(dynapro_drv);
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
new file mode 100644
index 0000000..0b0f8c1
--- /dev/null
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -0,0 +1,1092 @@
+/*
+ * Copyright (C) 2012 Simon Budig, <simon.budig@kernelconcepts.de>
+ * Daniel Wagener <daniel.wagener@kernelconcepts.de> (M09 firmware support)
+ * Lothar Waßmann <LW@KARO-electronics.de> (DT support)
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * This is a driver for the EDT "Polytouch" family of touch controllers
+ * based on the FocalTech FT5x06 line of chips.
+ *
+ * Development of this driver has been sponsored by Glyn:
+ *    http://www.glyn.com/Products/Displays
+ */
+
+#include <linux/module.h>
+#include <linux/ratelimit.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/uaccess.h>
+#include <linux/delay.h>
+#include <linux/debugfs.h>
+#include <linux/slab.h>
+#include <linux/gpio/consumer.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/of_device.h>
+
+#define WORK_REGISTER_THRESHOLD		0x00
+#define WORK_REGISTER_REPORT_RATE	0x08
+#define WORK_REGISTER_GAIN		0x30
+#define WORK_REGISTER_OFFSET		0x31
+#define WORK_REGISTER_NUM_X		0x33
+#define WORK_REGISTER_NUM_Y		0x34
+
+#define M09_REGISTER_THRESHOLD		0x80
+#define M09_REGISTER_GAIN		0x92
+#define M09_REGISTER_OFFSET		0x93
+#define M09_REGISTER_NUM_X		0x94
+#define M09_REGISTER_NUM_Y		0x95
+
+#define NO_REGISTER			0xff
+
+#define WORK_REGISTER_OPMODE		0x3c
+#define FACTORY_REGISTER_OPMODE		0x01
+
+#define TOUCH_EVENT_DOWN		0x00
+#define TOUCH_EVENT_UP			0x01
+#define TOUCH_EVENT_ON			0x02
+#define TOUCH_EVENT_RESERVED		0x03
+
+#define EDT_NAME_LEN			23
+#define EDT_SWITCH_MODE_RETRIES		10
+#define EDT_SWITCH_MODE_DELAY		5 /* msec */
+#define EDT_RAW_DATA_RETRIES		100
+#define EDT_RAW_DATA_DELAY		1 /* msec */
+
+enum edt_ver {
+	M06,
+	M09,
+};
+
+struct edt_reg_addr {
+	int reg_threshold;
+	int reg_report_rate;
+	int reg_gain;
+	int reg_offset;
+	int reg_num_x;
+	int reg_num_y;
+};
+
+struct edt_ft5x06_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	u16 num_x;
+	u16 num_y;
+
+	struct gpio_desc *reset_gpio;
+	struct gpio_desc *wake_gpio;
+
+#if defined(CONFIG_DEBUG_FS)
+	struct dentry *debug_dir;
+	u8 *raw_buffer;
+	size_t raw_bufsize;
+#endif
+
+	struct mutex mutex;
+	bool factory_mode;
+	int threshold;
+	int gain;
+	int offset;
+	int report_rate;
+	int max_support_points;
+
+	char name[EDT_NAME_LEN];
+
+	struct edt_reg_addr reg_addr;
+	enum edt_ver version;
+};
+
+struct edt_i2c_chip_data {
+	int  max_support_points;
+};
+
+static int edt_ft5x06_ts_readwrite(struct i2c_client *client,
+				   u16 wr_len, u8 *wr_buf,
+				   u16 rd_len, u8 *rd_buf)
+{
+	struct i2c_msg wrmsg[2];
+	int i = 0;
+	int ret;
+
+	if (wr_len) {
+		wrmsg[i].addr  = client->addr;
+		wrmsg[i].flags = 0;
+		wrmsg[i].len = wr_len;
+		wrmsg[i].buf = wr_buf;
+		i++;
+	}
+	if (rd_len) {
+		wrmsg[i].addr  = client->addr;
+		wrmsg[i].flags = I2C_M_RD;
+		wrmsg[i].len = rd_len;
+		wrmsg[i].buf = rd_buf;
+		i++;
+	}
+
+	ret = i2c_transfer(client->adapter, wrmsg, i);
+	if (ret < 0)
+		return ret;
+	if (ret != i)
+		return -EIO;
+
+	return 0;
+}
+
+static bool edt_ft5x06_ts_check_crc(struct edt_ft5x06_ts_data *tsdata,
+				    u8 *buf, int buflen)
+{
+	int i;
+	u8 crc = 0;
+
+	for (i = 0; i < buflen - 1; i++)
+		crc ^= buf[i];
+
+	if (crc != buf[buflen-1]) {
+		dev_err_ratelimited(&tsdata->client->dev,
+				    "crc error: 0x%02x expected, got 0x%02x\n",
+				    crc, buf[buflen-1]);
+		return false;
+	}
+
+	return true;
+}
+
+static irqreturn_t edt_ft5x06_ts_isr(int irq, void *dev_id)
+{
+	struct edt_ft5x06_ts_data *tsdata = dev_id;
+	struct device *dev = &tsdata->client->dev;
+	u8 cmd;
+	u8 rdbuf[63];
+	int i, type, x, y, id;
+	int offset, tplen, datalen, crclen;
+	int error;
+
+	switch (tsdata->version) {
+	case M06:
+		cmd = 0xf9; /* tell the controller to send touch data */
+		offset = 5; /* where the actual touch data starts */
+		tplen = 4;  /* data comes in so called frames */
+		crclen = 1; /* length of the crc data */
+		break;
+
+	case M09:
+		cmd = 0x0;
+		offset = 3;
+		tplen = 6;
+		crclen = 0;
+		break;
+
+	default:
+		goto out;
+	}
+
+	memset(rdbuf, 0, sizeof(rdbuf));
+	datalen = tplen * tsdata->max_support_points + offset + crclen;
+
+	error = edt_ft5x06_ts_readwrite(tsdata->client,
+					sizeof(cmd), &cmd,
+					datalen, rdbuf);
+	if (error) {
+		dev_err_ratelimited(dev, "Unable to fetch data, error: %d\n",
+				    error);
+		goto out;
+	}
+
+	/* M09 does not send header or CRC */
+	if (tsdata->version == M06) {
+		if (rdbuf[0] != 0xaa || rdbuf[1] != 0xaa ||
+			rdbuf[2] != datalen) {
+			dev_err_ratelimited(dev,
+					"Unexpected header: %02x%02x%02x!\n",
+					rdbuf[0], rdbuf[1], rdbuf[2]);
+			goto out;
+		}
+
+		if (!edt_ft5x06_ts_check_crc(tsdata, rdbuf, datalen))
+			goto out;
+	}
+
+	for (i = 0; i < tsdata->max_support_points; i++) {
+		u8 *buf = &rdbuf[i * tplen + offset];
+		bool down;
+
+		type = buf[0] >> 6;
+		/* ignore Reserved events */
+		if (type == TOUCH_EVENT_RESERVED)
+			continue;
+
+		/* M06 sometimes sends bogus coordinates in TOUCH_DOWN */
+		if (tsdata->version == M06 && type == TOUCH_EVENT_DOWN)
+			continue;
+
+		x = ((buf[0] << 8) | buf[1]) & 0x0fff;
+		y = ((buf[2] << 8) | buf[3]) & 0x0fff;
+		id = (buf[2] >> 4) & 0x0f;
+		down = type != TOUCH_EVENT_UP;
+
+		input_mt_slot(tsdata->input, id);
+		input_mt_report_slot_state(tsdata->input, MT_TOOL_FINGER, down);
+
+		if (!down)
+			continue;
+
+		input_report_abs(tsdata->input, ABS_MT_POSITION_X, x);
+		input_report_abs(tsdata->input, ABS_MT_POSITION_Y, y);
+	}
+
+	input_mt_report_pointer_emulation(tsdata->input, true);
+	input_sync(tsdata->input);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int edt_ft5x06_register_write(struct edt_ft5x06_ts_data *tsdata,
+				     u8 addr, u8 value)
+{
+	u8 wrbuf[4];
+
+	switch (tsdata->version) {
+	case M06:
+		wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
+		wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
+		wrbuf[2] = value;
+		wrbuf[3] = wrbuf[0] ^ wrbuf[1] ^ wrbuf[2];
+		return edt_ft5x06_ts_readwrite(tsdata->client, 4,
+					wrbuf, 0, NULL);
+	case M09:
+		wrbuf[0] = addr;
+		wrbuf[1] = value;
+
+		return edt_ft5x06_ts_readwrite(tsdata->client, 2,
+					wrbuf, 0, NULL);
+
+	default:
+		return -EINVAL;
+	}
+}
+
+static int edt_ft5x06_register_read(struct edt_ft5x06_ts_data *tsdata,
+				    u8 addr)
+{
+	u8 wrbuf[2], rdbuf[2];
+	int error;
+
+	switch (tsdata->version) {
+	case M06:
+		wrbuf[0] = tsdata->factory_mode ? 0xf3 : 0xfc;
+		wrbuf[1] = tsdata->factory_mode ? addr & 0x7f : addr & 0x3f;
+		wrbuf[1] |= tsdata->factory_mode ? 0x80 : 0x40;
+
+		error = edt_ft5x06_ts_readwrite(tsdata->client, 2, wrbuf, 2,
+						rdbuf);
+		if (error)
+			return error;
+
+		if ((wrbuf[0] ^ wrbuf[1] ^ rdbuf[0]) != rdbuf[1]) {
+			dev_err(&tsdata->client->dev,
+				"crc error: 0x%02x expected, got 0x%02x\n",
+				wrbuf[0] ^ wrbuf[1] ^ rdbuf[0],
+				rdbuf[1]);
+			return -EIO;
+		}
+		break;
+
+	case M09:
+		wrbuf[0] = addr;
+		error = edt_ft5x06_ts_readwrite(tsdata->client, 1,
+						wrbuf, 1, rdbuf);
+		if (error)
+			return error;
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	return rdbuf[0];
+}
+
+struct edt_ft5x06_attribute {
+	struct device_attribute dattr;
+	size_t field_offset;
+	u8 limit_low;
+	u8 limit_high;
+	u8 addr_m06;
+	u8 addr_m09;
+};
+
+#define EDT_ATTR(_field, _mode, _addr_m06, _addr_m09,			\
+		_limit_low, _limit_high)				\
+	struct edt_ft5x06_attribute edt_ft5x06_attr_##_field = {	\
+		.dattr = __ATTR(_field, _mode,				\
+				edt_ft5x06_setting_show,		\
+				edt_ft5x06_setting_store),		\
+		.field_offset = offsetof(struct edt_ft5x06_ts_data, _field), \
+		.addr_m06 = _addr_m06,					\
+		.addr_m09 = _addr_m09,					\
+		.limit_low = _limit_low,				\
+		.limit_high = _limit_high,				\
+	}
+
+static ssize_t edt_ft5x06_setting_show(struct device *dev,
+				       struct device_attribute *dattr,
+				       char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+	struct edt_ft5x06_attribute *attr =
+			container_of(dattr, struct edt_ft5x06_attribute, dattr);
+	u8 *field = (u8 *)tsdata + attr->field_offset;
+	int val;
+	size_t count = 0;
+	int error = 0;
+	u8 addr;
+
+	mutex_lock(&tsdata->mutex);
+
+	if (tsdata->factory_mode) {
+		error = -EIO;
+		goto out;
+	}
+
+	switch (tsdata->version) {
+	case M06:
+		addr = attr->addr_m06;
+		break;
+
+	case M09:
+		addr = attr->addr_m09;
+		break;
+
+	default:
+		error = -ENODEV;
+		goto out;
+	}
+
+	if (addr != NO_REGISTER) {
+		val = edt_ft5x06_register_read(tsdata, addr);
+		if (val < 0) {
+			error = val;
+			dev_err(&tsdata->client->dev,
+				"Failed to fetch attribute %s, error %d\n",
+				dattr->attr.name, error);
+			goto out;
+		}
+	} else {
+		val = *field;
+	}
+
+	if (val != *field) {
+		dev_warn(&tsdata->client->dev,
+			 "%s: read (%d) and stored value (%d) differ\n",
+			 dattr->attr.name, val, *field);
+		*field = val;
+	}
+
+	count = scnprintf(buf, PAGE_SIZE, "%d\n", val);
+out:
+	mutex_unlock(&tsdata->mutex);
+	return error ?: count;
+}
+
+static ssize_t edt_ft5x06_setting_store(struct device *dev,
+					struct device_attribute *dattr,
+					const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+	struct edt_ft5x06_attribute *attr =
+			container_of(dattr, struct edt_ft5x06_attribute, dattr);
+	u8 *field = (u8 *)tsdata + attr->field_offset;
+	unsigned int val;
+	int error;
+	u8 addr;
+
+	mutex_lock(&tsdata->mutex);
+
+	if (tsdata->factory_mode) {
+		error = -EIO;
+		goto out;
+	}
+
+	error = kstrtouint(buf, 0, &val);
+	if (error)
+		goto out;
+
+	if (val < attr->limit_low || val > attr->limit_high) {
+		error = -ERANGE;
+		goto out;
+	}
+
+	switch (tsdata->version) {
+	case M06:
+		addr = attr->addr_m06;
+		break;
+
+	case M09:
+		addr = attr->addr_m09;
+		break;
+
+	default:
+		error = -ENODEV;
+		goto out;
+	}
+
+	if (addr != NO_REGISTER) {
+		error = edt_ft5x06_register_write(tsdata, addr, val);
+		if (error) {
+			dev_err(&tsdata->client->dev,
+				"Failed to update attribute %s, error: %d\n",
+				dattr->attr.name, error);
+			goto out;
+		}
+	}
+	*field = val;
+
+out:
+	mutex_unlock(&tsdata->mutex);
+	return error ?: count;
+}
+
+static EDT_ATTR(gain, S_IWUSR | S_IRUGO, WORK_REGISTER_GAIN,
+		M09_REGISTER_GAIN, 0, 31);
+static EDT_ATTR(offset, S_IWUSR | S_IRUGO, WORK_REGISTER_OFFSET,
+		M09_REGISTER_OFFSET, 0, 31);
+static EDT_ATTR(threshold, S_IWUSR | S_IRUGO, WORK_REGISTER_THRESHOLD,
+		M09_REGISTER_THRESHOLD, 20, 80);
+static EDT_ATTR(report_rate, S_IWUSR | S_IRUGO, WORK_REGISTER_REPORT_RATE,
+		NO_REGISTER, 3, 14);
+
+static struct attribute *edt_ft5x06_attrs[] = {
+	&edt_ft5x06_attr_gain.dattr.attr,
+	&edt_ft5x06_attr_offset.dattr.attr,
+	&edt_ft5x06_attr_threshold.dattr.attr,
+	&edt_ft5x06_attr_report_rate.dattr.attr,
+	NULL
+};
+
+static const struct attribute_group edt_ft5x06_attr_group = {
+	.attrs = edt_ft5x06_attrs,
+};
+
+#ifdef CONFIG_DEBUG_FS
+static int edt_ft5x06_factory_mode(struct edt_ft5x06_ts_data *tsdata)
+{
+	struct i2c_client *client = tsdata->client;
+	int retries = EDT_SWITCH_MODE_RETRIES;
+	int ret;
+	int error;
+
+	disable_irq(client->irq);
+
+	if (!tsdata->raw_buffer) {
+		tsdata->raw_bufsize = tsdata->num_x * tsdata->num_y *
+				      sizeof(u16);
+		tsdata->raw_buffer = kzalloc(tsdata->raw_bufsize, GFP_KERNEL);
+		if (!tsdata->raw_buffer) {
+			error = -ENOMEM;
+			goto err_out;
+		}
+	}
+
+	/* mode register is 0x3c when in the work mode */
+	if (tsdata->version == M09)
+		goto m09_out;
+
+	error = edt_ft5x06_register_write(tsdata, WORK_REGISTER_OPMODE, 0x03);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to switch to factory mode, error %d\n", error);
+		goto err_out;
+	}
+
+	tsdata->factory_mode = true;
+	do {
+		mdelay(EDT_SWITCH_MODE_DELAY);
+		/* mode register is 0x01 when in factory mode */
+		ret = edt_ft5x06_register_read(tsdata, FACTORY_REGISTER_OPMODE);
+		if (ret == 0x03)
+			break;
+	} while (--retries > 0);
+
+	if (retries == 0) {
+		dev_err(&client->dev, "not in factory mode after %dms.\n",
+			EDT_SWITCH_MODE_RETRIES * EDT_SWITCH_MODE_DELAY);
+		error = -EIO;
+		goto err_out;
+	}
+
+	return 0;
+
+err_out:
+	kfree(tsdata->raw_buffer);
+	tsdata->raw_buffer = NULL;
+	tsdata->factory_mode = false;
+	enable_irq(client->irq);
+
+	return error;
+
+m09_out:
+	dev_err(&client->dev, "No factory mode support for M09\n");
+	return -EINVAL;
+
+}
+
+static int edt_ft5x06_work_mode(struct edt_ft5x06_ts_data *tsdata)
+{
+	struct i2c_client *client = tsdata->client;
+	int retries = EDT_SWITCH_MODE_RETRIES;
+	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+	int ret;
+	int error;
+
+	/* mode register is 0x01 when in the factory mode */
+	error = edt_ft5x06_register_write(tsdata, FACTORY_REGISTER_OPMODE, 0x1);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to switch to work mode, error: %d\n", error);
+		return error;
+	}
+
+	tsdata->factory_mode = false;
+
+	do {
+		mdelay(EDT_SWITCH_MODE_DELAY);
+		/* mode register is 0x01 when in factory mode */
+		ret = edt_ft5x06_register_read(tsdata, WORK_REGISTER_OPMODE);
+		if (ret == 0x01)
+			break;
+	} while (--retries > 0);
+
+	if (retries == 0) {
+		dev_err(&client->dev, "not in work mode after %dms.\n",
+			EDT_SWITCH_MODE_RETRIES * EDT_SWITCH_MODE_DELAY);
+		tsdata->factory_mode = true;
+		return -EIO;
+	}
+
+	kfree(tsdata->raw_buffer);
+	tsdata->raw_buffer = NULL;
+
+	/* restore parameters */
+	edt_ft5x06_register_write(tsdata, reg_addr->reg_threshold,
+				  tsdata->threshold);
+	edt_ft5x06_register_write(tsdata, reg_addr->reg_gain,
+				  tsdata->gain);
+	edt_ft5x06_register_write(tsdata, reg_addr->reg_offset,
+				  tsdata->offset);
+	if (reg_addr->reg_report_rate)
+		edt_ft5x06_register_write(tsdata, reg_addr->reg_report_rate,
+				  tsdata->report_rate);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static int edt_ft5x06_debugfs_mode_get(void *data, u64 *mode)
+{
+	struct edt_ft5x06_ts_data *tsdata = data;
+
+	*mode = tsdata->factory_mode;
+
+	return 0;
+};
+
+static int edt_ft5x06_debugfs_mode_set(void *data, u64 mode)
+{
+	struct edt_ft5x06_ts_data *tsdata = data;
+	int retval = 0;
+
+	if (mode > 1)
+		return -ERANGE;
+
+	mutex_lock(&tsdata->mutex);
+
+	if (mode != tsdata->factory_mode) {
+		retval = mode ? edt_ft5x06_factory_mode(tsdata) :
+				edt_ft5x06_work_mode(tsdata);
+	}
+
+	mutex_unlock(&tsdata->mutex);
+
+	return retval;
+};
+
+DEFINE_SIMPLE_ATTRIBUTE(debugfs_mode_fops, edt_ft5x06_debugfs_mode_get,
+			edt_ft5x06_debugfs_mode_set, "%llu\n");
+
+static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file,
+				char __user *buf, size_t count, loff_t *off)
+{
+	struct edt_ft5x06_ts_data *tsdata = file->private_data;
+	struct i2c_client *client = tsdata->client;
+	int retries  = EDT_RAW_DATA_RETRIES;
+	int val, i, error;
+	size_t read = 0;
+	int colbytes;
+	char wrbuf[3];
+	u8 *rdbuf;
+
+	if (*off < 0 || *off >= tsdata->raw_bufsize)
+		return 0;
+
+	mutex_lock(&tsdata->mutex);
+
+	if (!tsdata->factory_mode || !tsdata->raw_buffer) {
+		error = -EIO;
+		goto out;
+	}
+
+	error = edt_ft5x06_register_write(tsdata, 0x08, 0x01);
+	if (error) {
+		dev_dbg(&client->dev,
+			"failed to write 0x08 register, error %d\n", error);
+		goto out;
+	}
+
+	do {
+		msleep(EDT_RAW_DATA_DELAY);
+		val = edt_ft5x06_register_read(tsdata, 0x08);
+		if (val < 1)
+			break;
+	} while (--retries > 0);
+
+	if (val < 0) {
+		error = val;
+		dev_dbg(&client->dev,
+			"failed to read 0x08 register, error %d\n", error);
+		goto out;
+	}
+
+	if (retries == 0) {
+		dev_dbg(&client->dev,
+			"timed out waiting for register to settle\n");
+		error = -ETIMEDOUT;
+		goto out;
+	}
+
+	rdbuf = tsdata->raw_buffer;
+	colbytes = tsdata->num_y * sizeof(u16);
+
+	wrbuf[0] = 0xf5;
+	wrbuf[1] = 0x0e;
+	for (i = 0; i < tsdata->num_x; i++) {
+		wrbuf[2] = i;  /* column index */
+		error = edt_ft5x06_ts_readwrite(tsdata->client,
+						sizeof(wrbuf), wrbuf,
+						colbytes, rdbuf);
+		if (error)
+			goto out;
+
+		rdbuf += colbytes;
+	}
+
+	read = min_t(size_t, count, tsdata->raw_bufsize - *off);
+	if (copy_to_user(buf, tsdata->raw_buffer + *off, read)) {
+		error = -EFAULT;
+		goto out;
+	}
+
+	*off += read;
+out:
+	mutex_unlock(&tsdata->mutex);
+	return error ?: read;
+};
+
+static const struct file_operations debugfs_raw_data_fops = {
+	.open = simple_open,
+	.read = edt_ft5x06_debugfs_raw_data_read,
+};
+
+static void
+edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
+			      const char *debugfs_name)
+{
+	tsdata->debug_dir = debugfs_create_dir(debugfs_name, NULL);
+	if (!tsdata->debug_dir)
+		return;
+
+	debugfs_create_u16("num_x", S_IRUSR, tsdata->debug_dir, &tsdata->num_x);
+	debugfs_create_u16("num_y", S_IRUSR, tsdata->debug_dir, &tsdata->num_y);
+
+	debugfs_create_file("mode", S_IRUSR | S_IWUSR,
+			    tsdata->debug_dir, tsdata, &debugfs_mode_fops);
+	debugfs_create_file("raw_data", S_IRUSR,
+			    tsdata->debug_dir, tsdata, &debugfs_raw_data_fops);
+}
+
+static void
+edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
+{
+	debugfs_remove_recursive(tsdata->debug_dir);
+	kfree(tsdata->raw_buffer);
+}
+
+#else
+
+static inline void
+edt_ft5x06_ts_prepare_debugfs(struct edt_ft5x06_ts_data *tsdata,
+			      const char *debugfs_name)
+{
+}
+
+static inline void
+edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata)
+{
+}
+
+#endif /* CONFIG_DEBUGFS */
+
+static int edt_ft5x06_ts_identify(struct i2c_client *client,
+					struct edt_ft5x06_ts_data *tsdata,
+					char *fw_version)
+{
+	u8 rdbuf[EDT_NAME_LEN];
+	char *p;
+	int error;
+	char *model_name = tsdata->name;
+
+	/* see what we find if we assume it is a M06 *
+	 * if we get less than EDT_NAME_LEN, we don't want
+	 * to have garbage in there
+	 */
+	memset(rdbuf, 0, sizeof(rdbuf));
+	error = edt_ft5x06_ts_readwrite(client, 1, "\xbb",
+					EDT_NAME_LEN - 1, rdbuf);
+	if (error)
+		return error;
+
+	/* if we find something consistent, stay with that assumption
+	 * at least M09 won't send 3 bytes here
+	 */
+	if (!(strncasecmp(rdbuf + 1, "EP0", 3))) {
+		tsdata->version = M06;
+
+		/* remove last '$' end marker */
+		rdbuf[EDT_NAME_LEN - 1] = '\0';
+		if (rdbuf[EDT_NAME_LEN - 2] == '$')
+			rdbuf[EDT_NAME_LEN - 2] = '\0';
+
+		/* look for Model/Version separator */
+		p = strchr(rdbuf, '*');
+		if (p)
+			*p++ = '\0';
+		strlcpy(model_name, rdbuf + 1, EDT_NAME_LEN);
+		strlcpy(fw_version, p ? p : "", EDT_NAME_LEN);
+	} else {
+		/* since there are only two versions around (M06, M09) */
+		tsdata->version = M09;
+
+		error = edt_ft5x06_ts_readwrite(client, 1, "\xA6",
+						2, rdbuf);
+		if (error)
+			return error;
+
+		strlcpy(fw_version, rdbuf, 2);
+
+		error = edt_ft5x06_ts_readwrite(client, 1, "\xA8",
+						1, rdbuf);
+		if (error)
+			return error;
+
+		snprintf(model_name, EDT_NAME_LEN, "EP0%i%i0M09",
+			rdbuf[0] >> 4, rdbuf[0] & 0x0F);
+	}
+
+	return 0;
+}
+
+static void edt_ft5x06_ts_get_defaults(struct device *dev,
+				       struct edt_ft5x06_ts_data *tsdata)
+{
+	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+	u32 val;
+	int error;
+
+	error = device_property_read_u32(dev, "threshold", &val);
+	if (!error)
+		reg_addr->reg_threshold = val;
+
+	error = device_property_read_u32(dev, "gain", &val);
+	if (!error)
+		reg_addr->reg_gain = val;
+
+	error = device_property_read_u32(dev, "offset", &val);
+	if (!error)
+		reg_addr->reg_offset = val;
+}
+
+static void
+edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
+{
+	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+
+	tsdata->threshold = edt_ft5x06_register_read(tsdata,
+						     reg_addr->reg_threshold);
+	tsdata->gain = edt_ft5x06_register_read(tsdata, reg_addr->reg_gain);
+	tsdata->offset = edt_ft5x06_register_read(tsdata, reg_addr->reg_offset);
+	if (reg_addr->reg_report_rate != NO_REGISTER)
+		tsdata->report_rate = edt_ft5x06_register_read(tsdata,
+						reg_addr->reg_report_rate);
+	tsdata->num_x = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_x);
+	tsdata->num_y = edt_ft5x06_register_read(tsdata, reg_addr->reg_num_y);
+}
+
+static void
+edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
+{
+	struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
+
+	switch (tsdata->version) {
+	case M06:
+		reg_addr->reg_threshold = WORK_REGISTER_THRESHOLD;
+		reg_addr->reg_report_rate = WORK_REGISTER_REPORT_RATE;
+		reg_addr->reg_gain = WORK_REGISTER_GAIN;
+		reg_addr->reg_offset = WORK_REGISTER_OFFSET;
+		reg_addr->reg_num_x = WORK_REGISTER_NUM_X;
+		reg_addr->reg_num_y = WORK_REGISTER_NUM_Y;
+		break;
+
+	case M09:
+		reg_addr->reg_threshold = M09_REGISTER_THRESHOLD;
+		reg_addr->reg_gain = M09_REGISTER_GAIN;
+		reg_addr->reg_offset = M09_REGISTER_OFFSET;
+		reg_addr->reg_num_x = M09_REGISTER_NUM_X;
+		reg_addr->reg_num_y = M09_REGISTER_NUM_Y;
+		break;
+	}
+}
+
+static int edt_ft5x06_ts_probe(struct i2c_client *client,
+					 const struct i2c_device_id *id)
+{
+	const struct edt_i2c_chip_data *chip_data;
+	struct edt_ft5x06_ts_data *tsdata;
+	struct input_dev *input;
+	unsigned long irq_flags;
+	int error;
+	char fw_version[EDT_NAME_LEN];
+
+	dev_dbg(&client->dev, "probing for EDT FT5x06 I2C\n");
+
+	tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL);
+	if (!tsdata) {
+		dev_err(&client->dev, "failed to allocate driver data.\n");
+		return -ENOMEM;
+	}
+
+	chip_data = of_device_get_match_data(&client->dev);
+	if (!chip_data)
+		chip_data = (const struct edt_i2c_chip_data *)id->driver_data;
+	if (!chip_data || !chip_data->max_support_points) {
+		dev_err(&client->dev, "invalid or missing chip data\n");
+		return -EINVAL;
+	}
+
+	tsdata->max_support_points = chip_data->max_support_points;
+
+	tsdata->reset_gpio = devm_gpiod_get_optional(&client->dev,
+						     "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(tsdata->reset_gpio)) {
+		error = PTR_ERR(tsdata->reset_gpio);
+		dev_err(&client->dev,
+			"Failed to request GPIO reset pin, error %d\n", error);
+		return error;
+	}
+
+	tsdata->wake_gpio = devm_gpiod_get_optional(&client->dev,
+						    "wake", GPIOD_OUT_LOW);
+	if (IS_ERR(tsdata->wake_gpio)) {
+		error = PTR_ERR(tsdata->wake_gpio);
+		dev_err(&client->dev,
+			"Failed to request GPIO wake pin, error %d\n", error);
+		return error;
+	}
+
+	if (tsdata->wake_gpio) {
+		usleep_range(5000, 6000);
+		gpiod_set_value_cansleep(tsdata->wake_gpio, 1);
+	}
+
+	if (tsdata->reset_gpio) {
+		usleep_range(5000, 6000);
+		gpiod_set_value_cansleep(tsdata->reset_gpio, 0);
+		msleep(300);
+	}
+
+	input = devm_input_allocate_device(&client->dev);
+	if (!input) {
+		dev_err(&client->dev, "failed to allocate input device.\n");
+		return -ENOMEM;
+	}
+
+	mutex_init(&tsdata->mutex);
+	tsdata->client = client;
+	tsdata->input = input;
+	tsdata->factory_mode = false;
+
+	error = edt_ft5x06_ts_identify(client, tsdata, fw_version);
+	if (error) {
+		dev_err(&client->dev, "touchscreen probe failed\n");
+		return error;
+	}
+
+	edt_ft5x06_ts_set_regs(tsdata);
+	edt_ft5x06_ts_get_defaults(&client->dev, tsdata);
+	edt_ft5x06_ts_get_parameters(tsdata);
+
+	dev_dbg(&client->dev,
+		"Model \"%s\", Rev. \"%s\", %dx%d sensors\n",
+		tsdata->name, fw_version, tsdata->num_x, tsdata->num_y);
+
+	input->name = tsdata->name;
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+
+	input_set_abs_params(input, ABS_MT_POSITION_X,
+			     0, tsdata->num_x * 64 - 1, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y,
+			     0, tsdata->num_y * 64 - 1, 0, 0);
+
+	touchscreen_parse_properties(input, true);
+
+	error = input_mt_init_slots(input, tsdata->max_support_points,
+				INPUT_MT_DIRECT);
+	if (error) {
+		dev_err(&client->dev, "Unable to init MT slots.\n");
+		return error;
+	}
+
+	input_set_drvdata(input, tsdata);
+	i2c_set_clientdata(client, tsdata);
+
+	irq_flags = irq_get_trigger_type(client->irq);
+	if (irq_flags == IRQF_TRIGGER_NONE)
+		irq_flags = IRQF_TRIGGER_FALLING;
+	irq_flags |= IRQF_ONESHOT;
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					NULL, edt_ft5x06_ts_isr, irq_flags,
+					client->name, tsdata);
+	if (error) {
+		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+		return error;
+	}
+
+	error = sysfs_create_group(&client->dev.kobj, &edt_ft5x06_attr_group);
+	if (error)
+		return error;
+
+	error = input_register_device(input);
+	if (error)
+		goto err_remove_attrs;
+
+	edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev));
+	device_init_wakeup(&client->dev, 1);
+
+	dev_dbg(&client->dev,
+		"EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n",
+		client->irq,
+		tsdata->wake_gpio ? desc_to_gpio(tsdata->wake_gpio) : -1,
+		tsdata->reset_gpio ? desc_to_gpio(tsdata->reset_gpio) : -1);
+
+	return 0;
+
+err_remove_attrs:
+	sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
+	return error;
+}
+
+static int edt_ft5x06_ts_remove(struct i2c_client *client)
+{
+	struct edt_ft5x06_ts_data *tsdata = i2c_get_clientdata(client);
+
+	edt_ft5x06_ts_teardown_debugfs(tsdata);
+	sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group);
+
+	return 0;
+}
+
+static int __maybe_unused edt_ft5x06_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int __maybe_unused edt_ft5x06_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(dev))
+		disable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(edt_ft5x06_ts_pm_ops,
+			 edt_ft5x06_ts_suspend, edt_ft5x06_ts_resume);
+
+static const struct edt_i2c_chip_data edt_ft5x06_data = {
+	.max_support_points = 5,
+};
+
+static const struct edt_i2c_chip_data edt_ft5506_data = {
+	.max_support_points = 10,
+};
+
+static const struct i2c_device_id edt_ft5x06_ts_id[] = {
+	{ .name = "edt-ft5x06", .driver_data = (long)&edt_ft5x06_data },
+	{ .name = "edt-ft5506", .driver_data = (long)&edt_ft5506_data },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id edt_ft5x06_of_match[] = {
+	{ .compatible = "edt,edt-ft5206", .data = &edt_ft5x06_data },
+	{ .compatible = "edt,edt-ft5306", .data = &edt_ft5x06_data },
+	{ .compatible = "edt,edt-ft5406", .data = &edt_ft5x06_data },
+	{ .compatible = "edt,edt-ft5506", .data = &edt_ft5506_data },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match);
+#endif
+
+static struct i2c_driver edt_ft5x06_ts_driver = {
+	.driver = {
+		.name = "edt_ft5x06",
+		.of_match_table = of_match_ptr(edt_ft5x06_of_match),
+		.pm = &edt_ft5x06_ts_pm_ops,
+	},
+	.id_table = edt_ft5x06_ts_id,
+	.probe    = edt_ft5x06_ts_probe,
+	.remove   = edt_ft5x06_ts_remove,
+};
+
+module_i2c_driver(edt_ft5x06_ts_driver);
+
+MODULE_AUTHOR("Simon Budig <simon.budig@kernelconcepts.de>");
+MODULE_DESCRIPTION("EDT FT5x06 I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/eeti_ts.c b/drivers/input/touchscreen/eeti_ts.c
new file mode 100644
index 0000000..09be6ce
--- /dev/null
+++ b/drivers/input/touchscreen/eeti_ts.c
@@ -0,0 +1,327 @@
+/*
+ * Touch Screen driver for EETI's I2C connected touch screen panels
+ *   Copyright (c) 2009 Daniel Mack <daniel@caiaq.de>
+ *
+ * See EETI's software guide for the protocol specification:
+ *   http://home.eeti.com.tw/web20/eg/guide.htm
+ *
+ * Based on migor_ts.c
+ *   Copyright (c) 2008 Magnus Damm
+ *   Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>
+ *
+ * This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU  General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+#include <linux/gpio.h>
+#include <linux/input/eeti_ts.h>
+#include <linux/slab.h>
+
+static bool flip_x;
+module_param(flip_x, bool, 0644);
+MODULE_PARM_DESC(flip_x, "flip x coordinate");
+
+static bool flip_y;
+module_param(flip_y, bool, 0644);
+MODULE_PARM_DESC(flip_y, "flip y coordinate");
+
+struct eeti_ts_priv {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct work_struct work;
+	struct mutex mutex;
+	int irq_gpio, irq, irq_active_high;
+};
+
+#define EETI_TS_BITDEPTH	(11)
+#define EETI_MAXVAL		((1 << (EETI_TS_BITDEPTH + 1)) - 1)
+
+#define REPORT_BIT_PRESSED	(1 << 0)
+#define REPORT_BIT_AD0		(1 << 1)
+#define REPORT_BIT_AD1		(1 << 2)
+#define REPORT_BIT_HAS_PRESSURE	(1 << 6)
+#define REPORT_RES_BITS(v)	(((v) >> 1) + EETI_TS_BITDEPTH)
+
+static inline int eeti_ts_irq_active(struct eeti_ts_priv *priv)
+{
+	return gpio_get_value(priv->irq_gpio) == priv->irq_active_high;
+}
+
+static void eeti_ts_read(struct work_struct *work)
+{
+	char buf[6];
+	unsigned int x, y, res, pressed, to = 100;
+	struct eeti_ts_priv *priv =
+		container_of(work, struct eeti_ts_priv, work);
+
+	mutex_lock(&priv->mutex);
+
+	while (eeti_ts_irq_active(priv) && --to)
+		i2c_master_recv(priv->client, buf, sizeof(buf));
+
+	if (!to) {
+		dev_err(&priv->client->dev,
+			"unable to clear IRQ - line stuck?\n");
+		goto out;
+	}
+
+	/* drop non-report packets */
+	if (!(buf[0] & 0x80))
+		goto out;
+
+	pressed = buf[0] & REPORT_BIT_PRESSED;
+	res = REPORT_RES_BITS(buf[0] & (REPORT_BIT_AD0 | REPORT_BIT_AD1));
+	x = buf[2] | (buf[1] << 8);
+	y = buf[4] | (buf[3] << 8);
+
+	/* fix the range to 11 bits */
+	x >>= res - EETI_TS_BITDEPTH;
+	y >>= res - EETI_TS_BITDEPTH;
+
+	if (flip_x)
+		x = EETI_MAXVAL - x;
+
+	if (flip_y)
+		y = EETI_MAXVAL - y;
+
+	if (buf[0] & REPORT_BIT_HAS_PRESSURE)
+		input_report_abs(priv->input, ABS_PRESSURE, buf[5]);
+
+	input_report_abs(priv->input, ABS_X, x);
+	input_report_abs(priv->input, ABS_Y, y);
+	input_report_key(priv->input, BTN_TOUCH, !!pressed);
+	input_sync(priv->input);
+
+out:
+	mutex_unlock(&priv->mutex);
+}
+
+static irqreturn_t eeti_ts_isr(int irq, void *dev_id)
+{
+	struct eeti_ts_priv *priv = dev_id;
+
+	 /* postpone I2C transactions as we are atomic */
+	schedule_work(&priv->work);
+
+	return IRQ_HANDLED;
+}
+
+static void eeti_ts_start(struct eeti_ts_priv *priv)
+{
+	enable_irq(priv->irq);
+
+	/* Read the events once to arm the IRQ */
+	eeti_ts_read(&priv->work);
+}
+
+static void eeti_ts_stop(struct eeti_ts_priv *priv)
+{
+	disable_irq(priv->irq);
+	cancel_work_sync(&priv->work);
+}
+
+static int eeti_ts_open(struct input_dev *dev)
+{
+	struct eeti_ts_priv *priv = input_get_drvdata(dev);
+
+	eeti_ts_start(priv);
+
+	return 0;
+}
+
+static void eeti_ts_close(struct input_dev *dev)
+{
+	struct eeti_ts_priv *priv = input_get_drvdata(dev);
+
+	eeti_ts_stop(priv);
+}
+
+static int eeti_ts_probe(struct i2c_client *client,
+				   const struct i2c_device_id *idp)
+{
+	struct eeti_ts_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct eeti_ts_priv *priv;
+	struct input_dev *input;
+	unsigned int irq_flags;
+	int err = -ENOMEM;
+
+	/*
+	 * In contrast to what's described in the datasheet, there seems
+	 * to be no way of probing the presence of that device using I2C
+	 * commands. So we need to blindly believe it is there, and wait
+	 * for interrupts to occur.
+	 */
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&client->dev, "failed to allocate driver data\n");
+		goto err0;
+	}
+
+	mutex_init(&priv->mutex);
+	input = input_allocate_device();
+
+	if (!input) {
+		dev_err(&client->dev, "Failed to allocate input device.\n");
+		goto err1;
+	}
+
+	input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input, ABS_X, 0, EETI_MAXVAL, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, EETI_MAXVAL, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE, 0, 0xff, 0, 0);
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+	input->open = eeti_ts_open;
+	input->close = eeti_ts_close;
+
+	priv->client = client;
+	priv->input = input;
+	priv->irq_gpio = pdata->irq_gpio;
+	priv->irq = gpio_to_irq(pdata->irq_gpio);
+
+	err = gpio_request_one(pdata->irq_gpio, GPIOF_IN, client->name);
+	if (err < 0)
+		goto err1;
+
+	priv->irq_active_high = pdata->irq_active_high;
+
+	irq_flags = priv->irq_active_high ?
+		IRQF_TRIGGER_RISING : IRQF_TRIGGER_FALLING;
+
+	INIT_WORK(&priv->work, eeti_ts_read);
+	i2c_set_clientdata(client, priv);
+	input_set_drvdata(input, priv);
+
+	err = input_register_device(input);
+	if (err)
+		goto err2;
+
+	err = request_irq(priv->irq, eeti_ts_isr, irq_flags,
+			  client->name, priv);
+	if (err) {
+		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+		goto err3;
+	}
+
+	/*
+	 * Disable the device for now. It will be enabled once the
+	 * input device is opened.
+	 */
+	eeti_ts_stop(priv);
+
+	device_init_wakeup(&client->dev, 0);
+	return 0;
+
+err3:
+	input_unregister_device(input);
+	input = NULL; /* so we dont try to free it below */
+err2:
+	gpio_free(pdata->irq_gpio);
+err1:
+	input_free_device(input);
+	kfree(priv);
+err0:
+	return err;
+}
+
+static int eeti_ts_remove(struct i2c_client *client)
+{
+	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+
+	free_irq(priv->irq, priv);
+	/*
+	 * eeti_ts_stop() leaves IRQ disabled. We need to re-enable it
+	 * so that device still works if we reload the driver.
+	 */
+	enable_irq(priv->irq);
+
+	input_unregister_device(priv->input);
+	kfree(priv);
+
+	return 0;
+}
+
+static int __maybe_unused eeti_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+	struct input_dev *input_dev = priv->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		eeti_ts_stop(priv);
+
+	mutex_unlock(&input_dev->mutex);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(priv->irq);
+
+	return 0;
+}
+
+static int __maybe_unused eeti_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct eeti_ts_priv *priv = i2c_get_clientdata(client);
+	struct input_dev *input_dev = priv->input;
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(priv->irq);
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users)
+		eeti_ts_start(priv);
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(eeti_ts_pm, eeti_ts_suspend, eeti_ts_resume);
+
+static const struct i2c_device_id eeti_ts_id[] = {
+	{ "eeti_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, eeti_ts_id);
+
+static struct i2c_driver eeti_ts_driver = {
+	.driver = {
+		.name = "eeti_ts",
+		.pm = &eeti_ts_pm,
+	},
+	.probe = eeti_ts_probe,
+	.remove = eeti_ts_remove,
+	.id_table = eeti_ts_id,
+};
+
+module_i2c_driver(eeti_ts_driver);
+
+MODULE_DESCRIPTION("EETI Touchscreen driver");
+MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c
new file mode 100644
index 0000000..1afc08b
--- /dev/null
+++ b/drivers/input/touchscreen/egalax_ts.c
@@ -0,0 +1,283 @@
+/*
+ * Driver for EETI eGalax Multiple Touch Controller
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ *
+ * based on max11801_ts.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/* EETI eGalax serial touch screen controller is a I2C based multiple
+ * touch screen controller, it supports 5 point multiple touch. */
+
+/* TODO:
+  - auto idle mode support
+*/
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/input/mt.h>
+#include <linux/of_gpio.h>
+
+/*
+ * Mouse Mode: some panel may configure the controller to mouse mode,
+ * which can only report one point at a given time.
+ * This driver will ignore events in this mode.
+ */
+#define REPORT_MODE_MOUSE		0x1
+/*
+ * Vendor Mode: this mode is used to transfer some vendor specific
+ * messages.
+ * This driver will ignore events in this mode.
+ */
+#define REPORT_MODE_VENDOR		0x3
+/* Multiple Touch Mode */
+#define REPORT_MODE_MTTOUCH		0x4
+
+#define MAX_SUPPORT_POINTS		5
+
+#define EVENT_VALID_OFFSET	7
+#define EVENT_VALID_MASK	(0x1 << EVENT_VALID_OFFSET)
+#define EVENT_ID_OFFSET		2
+#define EVENT_ID_MASK		(0xf << EVENT_ID_OFFSET)
+#define EVENT_IN_RANGE		(0x1 << 1)
+#define EVENT_DOWN_UP		(0X1 << 0)
+
+#define MAX_I2C_DATA_LEN	10
+
+#define EGALAX_MAX_X	32760
+#define EGALAX_MAX_Y	32760
+#define EGALAX_MAX_TRIES 100
+
+struct egalax_ts {
+	struct i2c_client		*client;
+	struct input_dev		*input_dev;
+};
+
+static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id)
+{
+	struct egalax_ts *ts = dev_id;
+	struct input_dev *input_dev = ts->input_dev;
+	struct i2c_client *client = ts->client;
+	u8 buf[MAX_I2C_DATA_LEN];
+	int id, ret, x, y, z;
+	int tries = 0;
+	bool down, valid;
+	u8 state;
+
+	do {
+		ret = i2c_master_recv(client, buf, MAX_I2C_DATA_LEN);
+	} while (ret == -EAGAIN && tries++ < EGALAX_MAX_TRIES);
+
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	if (buf[0] != REPORT_MODE_MTTOUCH) {
+		/* ignore mouse events and vendor events */
+		return IRQ_HANDLED;
+	}
+
+	state = buf[1];
+	x = (buf[3] << 8) | buf[2];
+	y = (buf[5] << 8) | buf[4];
+	z = (buf[7] << 8) | buf[6];
+
+	valid = state & EVENT_VALID_MASK;
+	id = (state & EVENT_ID_MASK) >> EVENT_ID_OFFSET;
+	down = state & EVENT_DOWN_UP;
+
+	if (!valid || id > MAX_SUPPORT_POINTS) {
+		dev_dbg(&client->dev, "point invalid\n");
+		return IRQ_HANDLED;
+	}
+
+	input_mt_slot(input_dev, id);
+	input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, down);
+
+	dev_dbg(&client->dev, "%s id:%d x:%d y:%d z:%d",
+		down ? "down" : "up", id, x, y, z);
+
+	if (down) {
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, z);
+	}
+
+	input_mt_report_pointer_emulation(input_dev, true);
+	input_sync(input_dev);
+
+	return IRQ_HANDLED;
+}
+
+/* wake up controller by an falling edge of interrupt gpio.  */
+static int egalax_wake_up_device(struct i2c_client *client)
+{
+	struct device_node *np = client->dev.of_node;
+	int gpio;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	gpio = of_get_named_gpio(np, "wakeup-gpios", 0);
+	if (!gpio_is_valid(gpio))
+		return -ENODEV;
+
+	ret = gpio_request(gpio, "egalax_irq");
+	if (ret < 0) {
+		dev_err(&client->dev,
+			"request gpio failed, cannot wake up controller: %d\n",
+			ret);
+		return ret;
+	}
+
+	/* wake up controller via an falling edge on IRQ gpio. */
+	gpio_direction_output(gpio, 0);
+	gpio_set_value(gpio, 1);
+
+	/* controller should be waken up, return irq.  */
+	gpio_direction_input(gpio);
+	gpio_free(gpio);
+
+	return 0;
+}
+
+static int egalax_firmware_version(struct i2c_client *client)
+{
+	static const u8 cmd[MAX_I2C_DATA_LEN] = { 0x03, 0x03, 0xa, 0x01, 0x41 };
+	int ret;
+
+	ret = i2c_master_send(client, cmd, MAX_I2C_DATA_LEN);
+	if (ret < 0)
+		return ret;
+
+	return 0;
+}
+
+static int egalax_ts_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct egalax_ts *ts;
+	struct input_dev *input_dev;
+	int error;
+
+	ts = devm_kzalloc(&client->dev, sizeof(struct egalax_ts), GFP_KERNEL);
+	if (!ts) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	ts->client = client;
+	ts->input_dev = input_dev;
+
+	/* controller may be in sleep, wake it up. */
+	error = egalax_wake_up_device(client);
+	if (error) {
+		dev_err(&client->dev, "Failed to wake up the controller\n");
+		return error;
+	}
+
+	error = egalax_firmware_version(client);
+	if (error < 0) {
+		dev_err(&client->dev, "Failed to read firmware version\n");
+		return error;
+	}
+
+	input_dev->name = "EETI eGalax Touch Screen";
+	input_dev->id.bustype = BUS_I2C;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X, 0, EGALAX_MAX_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, EGALAX_MAX_Y, 0, 0);
+	input_set_abs_params(input_dev,
+			     ABS_MT_POSITION_X, 0, EGALAX_MAX_X, 0, 0);
+	input_set_abs_params(input_dev,
+			     ABS_MT_POSITION_Y, 0, EGALAX_MAX_Y, 0, 0);
+	input_mt_init_slots(input_dev, MAX_SUPPORT_POINTS, 0);
+
+	input_set_drvdata(input_dev, ts);
+
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					  egalax_ts_interrupt,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  "egalax_ts", ts);
+	if (error < 0) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		return error;
+	}
+
+	error = input_register_device(ts->input_dev);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, ts);
+	return 0;
+}
+
+static const struct i2c_device_id egalax_ts_id[] = {
+	{ "egalax_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, egalax_ts_id);
+
+static int __maybe_unused egalax_ts_suspend(struct device *dev)
+{
+	static const u8 suspend_cmd[MAX_I2C_DATA_LEN] = {
+		0x3, 0x6, 0xa, 0x3, 0x36, 0x3f, 0x2, 0, 0, 0
+	};
+	struct i2c_client *client = to_i2c_client(dev);
+	int ret;
+
+	ret = i2c_master_send(client, suspend_cmd, MAX_I2C_DATA_LEN);
+	return ret > 0 ? 0 : ret;
+}
+
+static int __maybe_unused egalax_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	return egalax_wake_up_device(client);
+}
+
+static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume);
+
+static const struct of_device_id egalax_ts_dt_ids[] = {
+	{ .compatible = "eeti,egalax_ts" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, egalax_ts_dt_ids);
+
+static struct i2c_driver egalax_ts_driver = {
+	.driver = {
+		.name	= "egalax_ts",
+		.pm	= &egalax_ts_pm_ops,
+		.of_match_table	= egalax_ts_dt_ids,
+	},
+	.id_table	= egalax_ts_id,
+	.probe		= egalax_ts_probe,
+};
+
+module_i2c_driver(egalax_ts_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("Touchscreen driver for EETI eGalax touch controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/elants_i2c.c b/drivers/input/touchscreen/elants_i2c.c
new file mode 100644
index 0000000..486f8fe
--- /dev/null
+++ b/drivers/input/touchscreen/elants_i2c.c
@@ -0,0 +1,1416 @@
+/*
+ * Elan Microelectronics touch panels with I2C interface
+ *
+ * Copyright (C) 2014 Elan Microelectronics Corporation.
+ * Scott Liu <scott.liu@emc.com.tw>
+ *
+ * This code is partly based on hid-multitouch.c:
+ *
+ *  Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr>
+ *  Copyright (c) 2010-2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ *  Copyright (c) 2010-2012 Ecole Nationale de l'Aviation Civile, France
+ *
+ *
+ * This code is partly based on i2c-hid.c:
+ *
+ * Copyright (c) 2012 Benjamin Tissoires <benjamin.tissoires@gmail.com>
+ * Copyright (c) 2012 Ecole Nationale de l'Aviation Civile, France
+ * Copyright (c) 2012 Red Hat, Inc
+ */
+
+/*
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/async.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/uaccess.h>
+#include <linux/buffer_head.h>
+#include <linux/slab.h>
+#include <linux/firmware.h>
+#include <linux/input/mt.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <linux/gpio/consumer.h>
+#include <linux/regulator/consumer.h>
+#include <asm/unaligned.h>
+
+/* Device, Driver information */
+#define DEVICE_NAME	"elants_i2c"
+#define DRV_VERSION	"1.0.9"
+
+/* Convert from rows or columns into resolution */
+#define ELAN_TS_RESOLUTION(n, m)   (((n) - 1) * (m))
+
+/* FW header data */
+#define HEADER_SIZE		4
+#define FW_HDR_TYPE		0
+#define FW_HDR_COUNT		1
+#define FW_HDR_LENGTH		2
+
+/* Buffer mode Queue Header information */
+#define QUEUE_HEADER_SINGLE	0x62
+#define QUEUE_HEADER_NORMAL	0X63
+#define QUEUE_HEADER_WAIT	0x64
+
+/* Command header definition */
+#define CMD_HEADER_WRITE	0x54
+#define CMD_HEADER_READ		0x53
+#define CMD_HEADER_6B_READ	0x5B
+#define CMD_HEADER_RESP		0x52
+#define CMD_HEADER_6B_RESP	0x9B
+#define CMD_HEADER_HELLO	0x55
+#define CMD_HEADER_REK		0x66
+
+/* FW position data */
+#define PACKET_SIZE		55
+#define MAX_CONTACT_NUM		10
+#define FW_POS_HEADER		0
+#define FW_POS_STATE		1
+#define FW_POS_TOTAL		2
+#define FW_POS_XY		3
+#define FW_POS_CHECKSUM		34
+#define FW_POS_WIDTH		35
+#define FW_POS_PRESSURE		45
+
+#define HEADER_REPORT_10_FINGER	0x62
+
+/* Header (4 bytes) plus 3 fill 10-finger packets */
+#define MAX_PACKET_SIZE		169
+
+#define BOOT_TIME_DELAY_MS	50
+
+/* FW read command, 0x53 0x?? 0x0, 0x01 */
+#define E_ELAN_INFO_FW_VER	0x00
+#define E_ELAN_INFO_BC_VER	0x10
+#define E_ELAN_INFO_TEST_VER	0xE0
+#define E_ELAN_INFO_FW_ID	0xF0
+#define E_INFO_OSR		0xD6
+#define E_INFO_PHY_SCAN		0xD7
+#define E_INFO_PHY_DRIVER	0xD8
+
+#define MAX_RETRIES		3
+#define MAX_FW_UPDATE_RETRIES	30
+
+#define ELAN_FW_PAGESIZE	132
+
+/* calibration timeout definition */
+#define ELAN_CALI_TIMEOUT_MSEC	12000
+
+#define ELAN_POWERON_DELAY_USEC	500
+#define ELAN_RESET_DELAY_MSEC	20
+
+enum elants_state {
+	ELAN_STATE_NORMAL,
+	ELAN_WAIT_QUEUE_HEADER,
+	ELAN_WAIT_RECALIBRATION,
+};
+
+enum elants_iap_mode {
+	ELAN_IAP_OPERATIONAL,
+	ELAN_IAP_RECOVERY,
+};
+
+/* struct elants_data - represents state of Elan touchscreen device */
+struct elants_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+
+	struct regulator *vcc33;
+	struct regulator *vccio;
+	struct gpio_desc *reset_gpio;
+
+	u16 fw_version;
+	u8 test_version;
+	u8 solution_version;
+	u8 bc_version;
+	u8 iap_version;
+	u16 hw_version;
+	unsigned int x_res;	/* resolution in units/mm */
+	unsigned int y_res;
+	unsigned int x_max;
+	unsigned int y_max;
+
+	enum elants_state state;
+	enum elants_iap_mode iap_mode;
+
+	/* Guards against concurrent access to the device via sysfs */
+	struct mutex sysfs_mutex;
+
+	u8 cmd_resp[HEADER_SIZE];
+	struct completion cmd_done;
+
+	u8 buf[MAX_PACKET_SIZE];
+
+	bool wake_irq_enabled;
+	bool keep_power_in_suspend;
+};
+
+static int elants_i2c_send(struct i2c_client *client,
+			   const void *data, size_t size)
+{
+	int ret;
+
+	ret = i2c_master_send(client, data, size);
+	if (ret == size)
+		return 0;
+
+	if (ret >= 0)
+		ret = -EIO;
+
+	dev_err(&client->dev, "%s failed (%*ph): %d\n",
+		__func__, (int)size, data, ret);
+
+	return ret;
+}
+
+static int elants_i2c_read(struct i2c_client *client, void *data, size_t size)
+{
+	int ret;
+
+	ret = i2c_master_recv(client, data, size);
+	if (ret == size)
+		return 0;
+
+	if (ret >= 0)
+		ret = -EIO;
+
+	dev_err(&client->dev, "%s failed: %d\n", __func__, ret);
+
+	return ret;
+}
+
+static int elants_i2c_execute_command(struct i2c_client *client,
+				      const u8 *cmd, size_t cmd_size,
+				      u8 *resp, size_t resp_size)
+{
+	struct i2c_msg msgs[2];
+	int ret;
+	u8 expected_response;
+
+	switch (cmd[0]) {
+	case CMD_HEADER_READ:
+		expected_response = CMD_HEADER_RESP;
+		break;
+
+	case CMD_HEADER_6B_READ:
+		expected_response = CMD_HEADER_6B_RESP;
+		break;
+
+	default:
+		dev_err(&client->dev, "%s: invalid command %*ph\n",
+			__func__, (int)cmd_size, cmd);
+		return -EINVAL;
+	}
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = client->flags & I2C_M_TEN;
+	msgs[0].len = cmd_size;
+	msgs[0].buf = (u8 *)cmd;
+
+	msgs[1].addr = client->addr;
+	msgs[1].flags = client->flags & I2C_M_TEN;
+	msgs[1].flags |= I2C_M_RD;
+	msgs[1].len = resp_size;
+	msgs[1].buf = resp;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		return ret;
+
+	if (ret != ARRAY_SIZE(msgs) || resp[FW_HDR_TYPE] != expected_response)
+		return -EIO;
+
+	return 0;
+}
+
+static int elants_i2c_calibrate(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	int ret, error;
+	static const u8 w_flashkey[] = { 0x54, 0xC0, 0xE1, 0x5A };
+	static const u8 rek[] = { 0x54, 0x29, 0x00, 0x01 };
+	static const u8 rek_resp[] = { CMD_HEADER_REK, 0x66, 0x66, 0x66 };
+
+	disable_irq(client->irq);
+
+	ts->state = ELAN_WAIT_RECALIBRATION;
+	reinit_completion(&ts->cmd_done);
+
+	elants_i2c_send(client, w_flashkey, sizeof(w_flashkey));
+	elants_i2c_send(client, rek, sizeof(rek));
+
+	enable_irq(client->irq);
+
+	ret = wait_for_completion_interruptible_timeout(&ts->cmd_done,
+				msecs_to_jiffies(ELAN_CALI_TIMEOUT_MSEC));
+
+	ts->state = ELAN_STATE_NORMAL;
+
+	if (ret <= 0) {
+		error = ret < 0 ? ret : -ETIMEDOUT;
+		dev_err(&client->dev,
+			"error while waiting for calibration to complete: %d\n",
+			error);
+		return error;
+	}
+
+	if (memcmp(rek_resp, ts->cmd_resp, sizeof(rek_resp))) {
+		dev_err(&client->dev,
+			"unexpected calibration response: %*ph\n",
+			(int)sizeof(ts->cmd_resp), ts->cmd_resp);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int elants_i2c_sw_reset(struct i2c_client *client)
+{
+	const u8 soft_rst_cmd[] = { 0x77, 0x77, 0x77, 0x77 };
+	int error;
+
+	error = elants_i2c_send(client, soft_rst_cmd,
+				sizeof(soft_rst_cmd));
+	if (error) {
+		dev_err(&client->dev, "software reset failed: %d\n", error);
+		return error;
+	}
+
+	/*
+	 * We should wait at least 10 msec (but no more than 40) before
+	 * sending fastboot or IAP command to the device.
+	 */
+	msleep(30);
+
+	return 0;
+}
+
+static u16 elants_i2c_parse_version(u8 *buf)
+{
+	return get_unaligned_be32(buf) >> 4;
+}
+
+static int elants_i2c_query_fw_id(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	int error, retry_cnt;
+	const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_ID, 0x00, 0x01 };
+	u8 resp[HEADER_SIZE];
+
+	for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+		error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+						   resp, sizeof(resp));
+		if (!error) {
+			ts->hw_version = elants_i2c_parse_version(resp);
+			if (ts->hw_version != 0xffff)
+				return 0;
+		}
+
+		dev_dbg(&client->dev, "read fw id error=%d, buf=%*phC\n",
+			error, (int)sizeof(resp), resp);
+	}
+
+	dev_err(&client->dev,
+		"Failed to read fw id or fw id is invalid\n");
+
+	return -EINVAL;
+}
+
+static int elants_i2c_query_fw_version(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	int error, retry_cnt;
+	const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_FW_VER, 0x00, 0x01 };
+	u8 resp[HEADER_SIZE];
+
+	for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+		error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+						   resp, sizeof(resp));
+		if (!error) {
+			ts->fw_version = elants_i2c_parse_version(resp);
+			if (ts->fw_version != 0x0000 &&
+			    ts->fw_version != 0xffff)
+				return 0;
+		}
+
+		dev_dbg(&client->dev, "read fw version error=%d, buf=%*phC\n",
+			error, (int)sizeof(resp), resp);
+	}
+
+	dev_err(&client->dev,
+		"Failed to read fw version or fw version is invalid\n");
+
+	return -EINVAL;
+}
+
+static int elants_i2c_query_test_version(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	int error, retry_cnt;
+	u16 version;
+	const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_TEST_VER, 0x00, 0x01 };
+	u8 resp[HEADER_SIZE];
+
+	for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+		error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+						   resp, sizeof(resp));
+		if (!error) {
+			version = elants_i2c_parse_version(resp);
+			ts->test_version = version >> 8;
+			ts->solution_version = version & 0xff;
+
+			return 0;
+		}
+
+		dev_dbg(&client->dev,
+			"read test version error rc=%d, buf=%*phC\n",
+			error, (int)sizeof(resp), resp);
+	}
+
+	dev_err(&client->dev, "Failed to read test version\n");
+
+	return -EINVAL;
+}
+
+static int elants_i2c_query_bc_version(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	const u8 cmd[] = { CMD_HEADER_READ, E_ELAN_INFO_BC_VER, 0x00, 0x01 };
+	u8 resp[HEADER_SIZE];
+	u16 version;
+	int error;
+
+	error = elants_i2c_execute_command(client, cmd, sizeof(cmd),
+					   resp, sizeof(resp));
+	if (error) {
+		dev_err(&client->dev,
+			"read BC version error=%d, buf=%*phC\n",
+			error, (int)sizeof(resp), resp);
+		return error;
+	}
+
+	version = elants_i2c_parse_version(resp);
+	ts->bc_version = version >> 8;
+	ts->iap_version = version & 0xff;
+
+	return 0;
+}
+
+static int elants_i2c_query_ts_info(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	int error;
+	u8 resp[17];
+	u16 phy_x, phy_y, rows, cols, osr;
+	const u8 get_resolution_cmd[] = {
+		CMD_HEADER_6B_READ, 0x00, 0x00, 0x00, 0x00, 0x00
+	};
+	const u8 get_osr_cmd[] = {
+		CMD_HEADER_READ, E_INFO_OSR, 0x00, 0x01
+	};
+	const u8 get_physical_scan_cmd[] = {
+		CMD_HEADER_READ, E_INFO_PHY_SCAN, 0x00, 0x01
+	};
+	const u8 get_physical_drive_cmd[] = {
+		CMD_HEADER_READ, E_INFO_PHY_DRIVER, 0x00, 0x01
+	};
+
+	/* Get trace number */
+	error = elants_i2c_execute_command(client,
+					   get_resolution_cmd,
+					   sizeof(get_resolution_cmd),
+					   resp, sizeof(resp));
+	if (error) {
+		dev_err(&client->dev, "get resolution command failed: %d\n",
+			error);
+		return error;
+	}
+
+	rows = resp[2] + resp[6] + resp[10];
+	cols = resp[3] + resp[7] + resp[11];
+
+	/* Process mm_to_pixel information */
+	error = elants_i2c_execute_command(client,
+					   get_osr_cmd, sizeof(get_osr_cmd),
+					   resp, sizeof(resp));
+	if (error) {
+		dev_err(&client->dev, "get osr command failed: %d\n",
+			error);
+		return error;
+	}
+
+	osr = resp[3];
+
+	error = elants_i2c_execute_command(client,
+					   get_physical_scan_cmd,
+					   sizeof(get_physical_scan_cmd),
+					   resp, sizeof(resp));
+	if (error) {
+		dev_err(&client->dev, "get physical scan command failed: %d\n",
+			error);
+		return error;
+	}
+
+	phy_x = get_unaligned_be16(&resp[2]);
+
+	error = elants_i2c_execute_command(client,
+					   get_physical_drive_cmd,
+					   sizeof(get_physical_drive_cmd),
+					   resp, sizeof(resp));
+	if (error) {
+		dev_err(&client->dev, "get physical drive command failed: %d\n",
+			error);
+		return error;
+	}
+
+	phy_y = get_unaligned_be16(&resp[2]);
+
+	dev_dbg(&client->dev, "phy_x=%d, phy_y=%d\n", phy_x, phy_y);
+
+	if (rows == 0 || cols == 0 || osr == 0) {
+		dev_warn(&client->dev,
+			 "invalid trace number data: %d, %d, %d\n",
+			 rows, cols, osr);
+	} else {
+		/* translate trace number to TS resolution */
+		ts->x_max = ELAN_TS_RESOLUTION(rows, osr);
+		ts->x_res = DIV_ROUND_CLOSEST(ts->x_max, phy_x);
+		ts->y_max = ELAN_TS_RESOLUTION(cols, osr);
+		ts->y_res = DIV_ROUND_CLOSEST(ts->y_max, phy_y);
+	}
+
+	return 0;
+}
+
+static int elants_i2c_fastboot(struct i2c_client *client)
+{
+	const u8 boot_cmd[] = { 0x4D, 0x61, 0x69, 0x6E };
+	int error;
+
+	error = elants_i2c_send(client, boot_cmd, sizeof(boot_cmd));
+	if (error) {
+		dev_err(&client->dev, "boot failed: %d\n", error);
+		return error;
+	}
+
+	dev_dbg(&client->dev, "boot success -- 0x%x\n", client->addr);
+	return 0;
+}
+
+static int elants_i2c_initialize(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	int error, retry_cnt;
+	const u8 hello_packet[] = { 0x55, 0x55, 0x55, 0x55 };
+	const u8 recov_packet[] = { 0x55, 0x55, 0x80, 0x80 };
+	u8 buf[HEADER_SIZE];
+
+	for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+		error = elants_i2c_sw_reset(client);
+		if (error) {
+			/* Continue initializing if it's the last try */
+			if (retry_cnt < MAX_RETRIES - 1)
+				continue;
+		}
+
+		error = elants_i2c_fastboot(client);
+		if (error) {
+			/* Continue initializing if it's the last try */
+			if (retry_cnt < MAX_RETRIES - 1)
+				continue;
+		}
+
+		/* Wait for Hello packet */
+		msleep(BOOT_TIME_DELAY_MS);
+
+		error = elants_i2c_read(client, buf, sizeof(buf));
+		if (error) {
+			dev_err(&client->dev,
+				"failed to read 'hello' packet: %d\n", error);
+		} else if (!memcmp(buf, hello_packet, sizeof(hello_packet))) {
+			ts->iap_mode = ELAN_IAP_OPERATIONAL;
+			break;
+		} else if (!memcmp(buf, recov_packet, sizeof(recov_packet))) {
+			/*
+			 * Setting error code will mark device
+			 * in recovery mode below.
+			 */
+			error = -EIO;
+			break;
+		} else {
+			error = -EINVAL;
+			dev_err(&client->dev,
+				"invalid 'hello' packet: %*ph\n",
+				(int)sizeof(buf), buf);
+		}
+	}
+
+	if (!error)
+		error = elants_i2c_query_fw_id(ts);
+	if (!error)
+		error = elants_i2c_query_fw_version(ts);
+
+	if (error) {
+		ts->iap_mode = ELAN_IAP_RECOVERY;
+	} else {
+		elants_i2c_query_test_version(ts);
+		elants_i2c_query_bc_version(ts);
+		elants_i2c_query_ts_info(ts);
+	}
+
+	return 0;
+}
+
+/*
+ * Firmware update interface.
+ */
+
+static int elants_i2c_fw_write_page(struct i2c_client *client,
+				    const void *page)
+{
+	const u8 ack_ok[] = { 0xaa, 0xaa };
+	u8 buf[2];
+	int retry;
+	int error;
+
+	for (retry = 0; retry < MAX_FW_UPDATE_RETRIES; retry++) {
+		error = elants_i2c_send(client, page, ELAN_FW_PAGESIZE);
+		if (error) {
+			dev_err(&client->dev,
+				"IAP Write Page failed: %d\n", error);
+			continue;
+		}
+
+		error = elants_i2c_read(client, buf, 2);
+		if (error) {
+			dev_err(&client->dev,
+				"IAP Ack read failed: %d\n", error);
+			return error;
+		}
+
+		if (!memcmp(buf, ack_ok, sizeof(ack_ok)))
+			return 0;
+
+		error = -EIO;
+		dev_err(&client->dev,
+			"IAP Get Ack Error [%02x:%02x]\n",
+			buf[0], buf[1]);
+	}
+
+	return error;
+}
+
+static int elants_i2c_do_update_firmware(struct i2c_client *client,
+					 const struct firmware *fw,
+					 bool force)
+{
+	const u8 enter_iap[] = { 0x45, 0x49, 0x41, 0x50 };
+	const u8 enter_iap2[] = { 0x54, 0x00, 0x12, 0x34 };
+	const u8 iap_ack[] = { 0x55, 0xaa, 0x33, 0xcc };
+	const u8 close_idle[] = {0x54, 0x2c, 0x01, 0x01};
+	u8 buf[HEADER_SIZE];
+	u16 send_id;
+	int page, n_fw_pages;
+	int error;
+
+	/* Recovery mode detection! */
+	if (force) {
+		dev_dbg(&client->dev, "Recovery mode procedure\n");
+		error = elants_i2c_send(client, enter_iap2, sizeof(enter_iap2));
+	} else {
+		/* Start IAP Procedure */
+		dev_dbg(&client->dev, "Normal IAP procedure\n");
+		/* Close idle mode */
+		error = elants_i2c_send(client, close_idle, sizeof(close_idle));
+		if (error)
+			dev_err(&client->dev, "Failed close idle: %d\n", error);
+		msleep(60);
+		elants_i2c_sw_reset(client);
+		msleep(20);
+		error = elants_i2c_send(client, enter_iap, sizeof(enter_iap));
+	}
+
+	if (error) {
+		dev_err(&client->dev, "failed to enter IAP mode: %d\n", error);
+		return error;
+	}
+
+	msleep(20);
+
+	/* check IAP state */
+	error = elants_i2c_read(client, buf, 4);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to read IAP acknowledgement: %d\n",
+			error);
+		return error;
+	}
+
+	if (memcmp(buf, iap_ack, sizeof(iap_ack))) {
+		dev_err(&client->dev,
+			"failed to enter IAP: %*ph (expected %*ph)\n",
+			(int)sizeof(buf), buf, (int)sizeof(iap_ack), iap_ack);
+		return -EIO;
+	}
+
+	dev_info(&client->dev, "successfully entered IAP mode");
+
+	send_id = client->addr;
+	error = elants_i2c_send(client, &send_id, 1);
+	if (error) {
+		dev_err(&client->dev, "sending dummy byte failed: %d\n",
+			error);
+		return error;
+	}
+
+	/* Clear the last page of Master */
+	error = elants_i2c_send(client, fw->data, ELAN_FW_PAGESIZE);
+	if (error) {
+		dev_err(&client->dev, "clearing of the last page failed: %d\n",
+			error);
+		return error;
+	}
+
+	error = elants_i2c_read(client, buf, 2);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to read ACK for clearing the last page: %d\n",
+			error);
+		return error;
+	}
+
+	n_fw_pages = fw->size / ELAN_FW_PAGESIZE;
+	dev_dbg(&client->dev, "IAP Pages = %d\n", n_fw_pages);
+
+	for (page = 0; page < n_fw_pages; page++) {
+		error = elants_i2c_fw_write_page(client,
+					fw->data + page * ELAN_FW_PAGESIZE);
+		if (error) {
+			dev_err(&client->dev,
+				"failed to write FW page %d: %d\n",
+				page, error);
+			return error;
+		}
+	}
+
+	/* Old iap needs to wait 200ms for WDT and rest is for hello packets */
+	msleep(300);
+
+	dev_info(&client->dev, "firmware update completed\n");
+	return 0;
+}
+
+static int elants_i2c_fw_update(struct elants_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	const struct firmware *fw;
+	char *fw_name;
+	int error;
+
+	fw_name = kasprintf(GFP_KERNEL, "elants_i2c_%04x.bin", ts->hw_version);
+	if (!fw_name)
+		return -ENOMEM;
+
+	dev_info(&client->dev, "requesting fw name = %s\n", fw_name);
+	error = request_firmware(&fw, fw_name, &client->dev);
+	kfree(fw_name);
+	if (error) {
+		dev_err(&client->dev, "failed to request firmware: %d\n",
+			error);
+		return error;
+	}
+
+	if (fw->size % ELAN_FW_PAGESIZE) {
+		dev_err(&client->dev, "invalid firmware length: %zu\n",
+			fw->size);
+		error = -EINVAL;
+		goto out;
+	}
+
+	disable_irq(client->irq);
+
+	error = elants_i2c_do_update_firmware(client, fw,
+					ts->iap_mode == ELAN_IAP_RECOVERY);
+	if (error) {
+		dev_err(&client->dev, "firmware update failed: %d\n", error);
+		ts->iap_mode = ELAN_IAP_RECOVERY;
+		goto out_enable_irq;
+	}
+
+	error = elants_i2c_initialize(ts);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to initialize device after firmware update: %d\n",
+			error);
+		ts->iap_mode = ELAN_IAP_RECOVERY;
+		goto out_enable_irq;
+	}
+
+	ts->iap_mode = ELAN_IAP_OPERATIONAL;
+
+out_enable_irq:
+	ts->state = ELAN_STATE_NORMAL;
+	enable_irq(client->irq);
+	msleep(100);
+
+	if (!error)
+		elants_i2c_calibrate(ts);
+out:
+	release_firmware(fw);
+	return error;
+}
+
+/*
+ * Event reporting.
+ */
+
+static void elants_i2c_mt_event(struct elants_data *ts, u8 *buf)
+{
+	struct input_dev *input = ts->input;
+	unsigned int n_fingers;
+	u16 finger_state;
+	int i;
+
+	n_fingers = buf[FW_POS_STATE + 1] & 0x0f;
+	finger_state = ((buf[FW_POS_STATE + 1] & 0x30) << 4) |
+			buf[FW_POS_STATE];
+
+	dev_dbg(&ts->client->dev,
+		"n_fingers: %u, state: %04x\n",  n_fingers, finger_state);
+
+	for (i = 0; i < MAX_CONTACT_NUM && n_fingers; i++) {
+		if (finger_state & 1) {
+			unsigned int x, y, p, w;
+			u8 *pos;
+
+			pos = &buf[FW_POS_XY + i * 3];
+			x = (((u16)pos[0] & 0xf0) << 4) | pos[1];
+			y = (((u16)pos[0] & 0x0f) << 8) | pos[2];
+			p = buf[FW_POS_PRESSURE + i];
+			w = buf[FW_POS_WIDTH + i];
+
+			dev_dbg(&ts->client->dev, "i=%d x=%d y=%d p=%d w=%d\n",
+				i, x, y, p, w);
+
+			input_mt_slot(input, i);
+			input_mt_report_slot_state(input, MT_TOOL_FINGER, true);
+			input_event(input, EV_ABS, ABS_MT_POSITION_X, x);
+			input_event(input, EV_ABS, ABS_MT_POSITION_Y, y);
+			input_event(input, EV_ABS, ABS_MT_PRESSURE, p);
+			input_event(input, EV_ABS, ABS_MT_TOUCH_MAJOR, w);
+
+			n_fingers--;
+		}
+
+		finger_state >>= 1;
+	}
+
+	input_mt_sync_frame(input);
+	input_sync(input);
+}
+
+static u8 elants_i2c_calculate_checksum(u8 *buf)
+{
+	u8 checksum = 0;
+	u8 i;
+
+	for (i = 0; i < FW_POS_CHECKSUM; i++)
+		checksum += buf[i];
+
+	return checksum;
+}
+
+static void elants_i2c_event(struct elants_data *ts, u8 *buf)
+{
+	u8 checksum = elants_i2c_calculate_checksum(buf);
+
+	if (unlikely(buf[FW_POS_CHECKSUM] != checksum))
+		dev_warn(&ts->client->dev,
+			 "%s: invalid checksum for packet %02x: %02x vs. %02x\n",
+			 __func__, buf[FW_POS_HEADER],
+			 checksum, buf[FW_POS_CHECKSUM]);
+	else if (unlikely(buf[FW_POS_HEADER] != HEADER_REPORT_10_FINGER))
+		dev_warn(&ts->client->dev,
+			 "%s: unknown packet type: %02x\n",
+			 __func__, buf[FW_POS_HEADER]);
+	else
+		elants_i2c_mt_event(ts, buf);
+}
+
+static irqreturn_t elants_i2c_irq(int irq, void *_dev)
+{
+	const u8 wait_packet[] = { 0x64, 0x64, 0x64, 0x64 };
+	struct elants_data *ts = _dev;
+	struct i2c_client *client = ts->client;
+	int report_count, report_len;
+	int i;
+	int len;
+
+	len = i2c_master_recv(client, ts->buf, sizeof(ts->buf));
+	if (len < 0) {
+		dev_err(&client->dev, "%s: failed to read data: %d\n",
+			__func__, len);
+		goto out;
+	}
+
+	dev_dbg(&client->dev, "%s: packet %*ph\n",
+		__func__, HEADER_SIZE, ts->buf);
+
+	switch (ts->state) {
+	case ELAN_WAIT_RECALIBRATION:
+		if (ts->buf[FW_HDR_TYPE] == CMD_HEADER_REK) {
+			memcpy(ts->cmd_resp, ts->buf, sizeof(ts->cmd_resp));
+			complete(&ts->cmd_done);
+			ts->state = ELAN_STATE_NORMAL;
+		}
+		break;
+
+	case ELAN_WAIT_QUEUE_HEADER:
+		if (ts->buf[FW_HDR_TYPE] != QUEUE_HEADER_NORMAL)
+			break;
+
+		ts->state = ELAN_STATE_NORMAL;
+		/* fall through */
+
+	case ELAN_STATE_NORMAL:
+
+		switch (ts->buf[FW_HDR_TYPE]) {
+		case CMD_HEADER_HELLO:
+		case CMD_HEADER_RESP:
+		case CMD_HEADER_REK:
+			break;
+
+		case QUEUE_HEADER_WAIT:
+			if (memcmp(ts->buf, wait_packet, sizeof(wait_packet))) {
+				dev_err(&client->dev,
+					"invalid wait packet %*ph\n",
+					HEADER_SIZE, ts->buf);
+			} else {
+				ts->state = ELAN_WAIT_QUEUE_HEADER;
+				udelay(30);
+			}
+			break;
+
+		case QUEUE_HEADER_SINGLE:
+			elants_i2c_event(ts, &ts->buf[HEADER_SIZE]);
+			break;
+
+		case QUEUE_HEADER_NORMAL:
+			report_count = ts->buf[FW_HDR_COUNT];
+			if (report_count == 0 || report_count > 3) {
+				dev_err(&client->dev,
+					"bad report count: %*ph\n",
+					HEADER_SIZE, ts->buf);
+				break;
+			}
+
+			report_len = ts->buf[FW_HDR_LENGTH] / report_count;
+			if (report_len != PACKET_SIZE) {
+				dev_err(&client->dev,
+					"mismatching report length: %*ph\n",
+					HEADER_SIZE, ts->buf);
+				break;
+			}
+
+			for (i = 0; i < report_count; i++) {
+				u8 *buf = ts->buf + HEADER_SIZE +
+							i * PACKET_SIZE;
+				elants_i2c_event(ts, buf);
+			}
+			break;
+
+		default:
+			dev_err(&client->dev, "unknown packet %*ph\n",
+				HEADER_SIZE, ts->buf);
+			break;
+		}
+		break;
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+/*
+ * sysfs interface
+ */
+static ssize_t calibrate_store(struct device *dev,
+			       struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct elants_data *ts = i2c_get_clientdata(client);
+	int error;
+
+	error = mutex_lock_interruptible(&ts->sysfs_mutex);
+	if (error)
+		return error;
+
+	error = elants_i2c_calibrate(ts);
+
+	mutex_unlock(&ts->sysfs_mutex);
+	return error ?: count;
+}
+
+static ssize_t write_update_fw(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct elants_data *ts = i2c_get_clientdata(client);
+	int error;
+
+	error = mutex_lock_interruptible(&ts->sysfs_mutex);
+	if (error)
+		return error;
+
+	error = elants_i2c_fw_update(ts);
+	dev_dbg(dev, "firmware update result: %d\n", error);
+
+	mutex_unlock(&ts->sysfs_mutex);
+	return error ?: count;
+}
+
+static ssize_t show_iap_mode(struct device *dev,
+			     struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct elants_data *ts = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%s\n",
+		       ts->iap_mode == ELAN_IAP_OPERATIONAL ?
+				"Normal" : "Recovery");
+}
+
+static DEVICE_ATTR(calibrate, S_IWUSR, NULL, calibrate_store);
+static DEVICE_ATTR(iap_mode, S_IRUGO, show_iap_mode, NULL);
+static DEVICE_ATTR(update_fw, S_IWUSR, NULL, write_update_fw);
+
+struct elants_version_attribute {
+	struct device_attribute dattr;
+	size_t field_offset;
+	size_t field_size;
+};
+
+#define __ELANTS_FIELD_SIZE(_field)					\
+	sizeof(((struct elants_data *)NULL)->_field)
+#define __ELANTS_VERIFY_SIZE(_field)					\
+	(BUILD_BUG_ON_ZERO(__ELANTS_FIELD_SIZE(_field) > 2) +		\
+	 __ELANTS_FIELD_SIZE(_field))
+#define ELANTS_VERSION_ATTR(_field)					\
+	struct elants_version_attribute elants_ver_attr_##_field = {	\
+		.dattr = __ATTR(_field, S_IRUGO,			\
+				elants_version_attribute_show, NULL),	\
+		.field_offset = offsetof(struct elants_data, _field),	\
+		.field_size = __ELANTS_VERIFY_SIZE(_field),		\
+	}
+
+static ssize_t elants_version_attribute_show(struct device *dev,
+					     struct device_attribute *dattr,
+					     char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct elants_data *ts = i2c_get_clientdata(client);
+	struct elants_version_attribute *attr =
+		container_of(dattr, struct elants_version_attribute, dattr);
+	u8 *field = (u8 *)((char *)ts + attr->field_offset);
+	unsigned int fmt_size;
+	unsigned int val;
+
+	if (attr->field_size == 1) {
+		val = *field;
+		fmt_size = 2; /* 2 HEX digits */
+	} else {
+		val = *(u16 *)field;
+		fmt_size = 4; /* 4 HEX digits */
+	}
+
+	return sprintf(buf, "%0*x\n", fmt_size, val);
+}
+
+static ELANTS_VERSION_ATTR(fw_version);
+static ELANTS_VERSION_ATTR(hw_version);
+static ELANTS_VERSION_ATTR(test_version);
+static ELANTS_VERSION_ATTR(solution_version);
+static ELANTS_VERSION_ATTR(bc_version);
+static ELANTS_VERSION_ATTR(iap_version);
+
+static struct attribute *elants_attributes[] = {
+	&dev_attr_calibrate.attr,
+	&dev_attr_update_fw.attr,
+	&dev_attr_iap_mode.attr,
+
+	&elants_ver_attr_fw_version.dattr.attr,
+	&elants_ver_attr_hw_version.dattr.attr,
+	&elants_ver_attr_test_version.dattr.attr,
+	&elants_ver_attr_solution_version.dattr.attr,
+	&elants_ver_attr_bc_version.dattr.attr,
+	&elants_ver_attr_iap_version.dattr.attr,
+	NULL
+};
+
+static struct attribute_group elants_attribute_group = {
+	.attrs = elants_attributes,
+};
+
+static void elants_i2c_remove_sysfs_group(void *_data)
+{
+	struct elants_data *ts = _data;
+
+	sysfs_remove_group(&ts->client->dev.kobj, &elants_attribute_group);
+}
+
+static int elants_i2c_power_on(struct elants_data *ts)
+{
+	int error;
+
+	/*
+	 * If we do not have reset gpio assume platform firmware
+	 * controls regulators and does power them on for us.
+	 */
+	if (IS_ERR_OR_NULL(ts->reset_gpio))
+		return 0;
+
+	gpiod_set_value_cansleep(ts->reset_gpio, 1);
+
+	error = regulator_enable(ts->vcc33);
+	if (error) {
+		dev_err(&ts->client->dev,
+			"failed to enable vcc33 regulator: %d\n",
+			error);
+		goto release_reset_gpio;
+	}
+
+	error = regulator_enable(ts->vccio);
+	if (error) {
+		dev_err(&ts->client->dev,
+			"failed to enable vccio regulator: %d\n",
+			error);
+		regulator_disable(ts->vcc33);
+		goto release_reset_gpio;
+	}
+
+	/*
+	 * We need to wait a bit after powering on controller before
+	 * we are allowed to release reset GPIO.
+	 */
+	udelay(ELAN_POWERON_DELAY_USEC);
+
+release_reset_gpio:
+	gpiod_set_value_cansleep(ts->reset_gpio, 0);
+	if (error)
+		return error;
+
+	msleep(ELAN_RESET_DELAY_MSEC);
+
+	return 0;
+}
+
+static void elants_i2c_power_off(void *_data)
+{
+	struct elants_data *ts = _data;
+
+	if (!IS_ERR_OR_NULL(ts->reset_gpio)) {
+		/*
+		 * Activate reset gpio to prevent leakage through the
+		 * pin once we shut off power to the controller.
+		 */
+		gpiod_set_value_cansleep(ts->reset_gpio, 1);
+		regulator_disable(ts->vccio);
+		regulator_disable(ts->vcc33);
+	}
+}
+
+static int elants_i2c_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	union i2c_smbus_data dummy;
+	struct elants_data *ts;
+	unsigned long irqflags;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev,
+			"%s: i2c check functionality error\n", DEVICE_NAME);
+		return -ENXIO;
+	}
+
+	ts = devm_kzalloc(&client->dev, sizeof(struct elants_data), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	mutex_init(&ts->sysfs_mutex);
+	init_completion(&ts->cmd_done);
+
+	ts->client = client;
+	i2c_set_clientdata(client, ts);
+
+	ts->vcc33 = devm_regulator_get(&client->dev, "vcc33");
+	if (IS_ERR(ts->vcc33)) {
+		error = PTR_ERR(ts->vcc33);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"Failed to get 'vcc33' regulator: %d\n",
+				error);
+		return error;
+	}
+
+	ts->vccio = devm_regulator_get(&client->dev, "vccio");
+	if (IS_ERR(ts->vccio)) {
+		error = PTR_ERR(ts->vccio);
+		if (error != -EPROBE_DEFER)
+			dev_err(&client->dev,
+				"Failed to get 'vccio' regulator: %d\n",
+				error);
+		return error;
+	}
+
+	ts->reset_gpio = devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
+	if (IS_ERR(ts->reset_gpio)) {
+		error = PTR_ERR(ts->reset_gpio);
+
+		if (error == -EPROBE_DEFER)
+			return error;
+
+		if (error != -ENOENT && error != -ENOSYS) {
+			dev_err(&client->dev,
+				"failed to get reset gpio: %d\n",
+				error);
+			return error;
+		}
+
+		ts->keep_power_in_suspend = true;
+	}
+
+	error = elants_i2c_power_on(ts);
+	if (error)
+		return error;
+
+	error = devm_add_action(&client->dev, elants_i2c_power_off, ts);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to install power off action: %d\n", error);
+		elants_i2c_power_off(ts);
+		return error;
+	}
+
+	/* Make sure there is something at this address */
+	if (i2c_smbus_xfer(client->adapter, client->addr, 0,
+			   I2C_SMBUS_READ, 0, I2C_SMBUS_BYTE, &dummy) < 0) {
+		dev_err(&client->dev, "nothing at this address\n");
+		return -ENXIO;
+	}
+
+	error = elants_i2c_initialize(ts);
+	if (error) {
+		dev_err(&client->dev, "failed to initialize: %d\n", error);
+		return error;
+	}
+
+	ts->input = devm_input_allocate_device(&client->dev);
+	if (!ts->input) {
+		dev_err(&client->dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	ts->input->name = "Elan Touchscreen";
+	ts->input->id.bustype = BUS_I2C;
+
+	__set_bit(BTN_TOUCH, ts->input->keybit);
+	__set_bit(EV_ABS, ts->input->evbit);
+	__set_bit(EV_KEY, ts->input->evbit);
+
+	/* Single touch input params setup */
+	input_set_abs_params(ts->input, ABS_X, 0, ts->x_max, 0, 0);
+	input_set_abs_params(ts->input, ABS_Y, 0, ts->y_max, 0, 0);
+	input_set_abs_params(ts->input, ABS_PRESSURE, 0, 255, 0, 0);
+	input_abs_set_res(ts->input, ABS_X, ts->x_res);
+	input_abs_set_res(ts->input, ABS_Y, ts->y_res);
+
+	/* Multitouch input params setup */
+	error = input_mt_init_slots(ts->input, MAX_CONTACT_NUM,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to initialize MT slots: %d\n", error);
+		return error;
+	}
+
+	input_set_abs_params(ts->input, ABS_MT_POSITION_X, 0, ts->x_max, 0, 0);
+	input_set_abs_params(ts->input, ABS_MT_POSITION_Y, 0, ts->y_max, 0, 0);
+	input_set_abs_params(ts->input, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+	input_set_abs_params(ts->input, ABS_MT_PRESSURE, 0, 255, 0, 0);
+	input_abs_set_res(ts->input, ABS_MT_POSITION_X, ts->x_res);
+	input_abs_set_res(ts->input, ABS_MT_POSITION_Y, ts->y_res);
+
+	input_set_drvdata(ts->input, ts);
+
+	error = input_register_device(ts->input);
+	if (error) {
+		dev_err(&client->dev,
+			"unable to register input device: %d\n", error);
+		return error;
+	}
+
+	/*
+	 * Systems using device tree should set up interrupt via DTS,
+	 * the rest will use the default falling edge interrupts.
+	 */
+	irqflags = client->dev.of_node ? 0 : IRQF_TRIGGER_FALLING;
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, elants_i2c_irq,
+					  irqflags | IRQF_ONESHOT,
+					  client->name, ts);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		return error;
+	}
+
+	/*
+	 * Systems using device tree should set up wakeup via DTS,
+	 * the rest will configure device as wakeup source by default.
+	 */
+	if (!client->dev.of_node)
+		device_init_wakeup(&client->dev, true);
+
+	error = sysfs_create_group(&client->dev.kobj, &elants_attribute_group);
+	if (error) {
+		dev_err(&client->dev, "failed to create sysfs attributes: %d\n",
+			error);
+		return error;
+	}
+
+	error = devm_add_action(&client->dev,
+				elants_i2c_remove_sysfs_group, ts);
+	if (error) {
+		elants_i2c_remove_sysfs_group(ts);
+		dev_err(&client->dev,
+			"Failed to add sysfs cleanup action: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused elants_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct elants_data *ts = i2c_get_clientdata(client);
+	const u8 set_sleep_cmd[] = { 0x54, 0x50, 0x00, 0x01 };
+	int retry_cnt;
+	int error;
+
+	/* Command not support in IAP recovery mode */
+	if (ts->iap_mode != ELAN_IAP_OPERATIONAL)
+		return -EBUSY;
+
+	disable_irq(client->irq);
+
+	if (device_may_wakeup(dev)) {
+		/*
+		 * The device will automatically enter idle mode
+		 * that has reduced power consumption.
+		 */
+		ts->wake_irq_enabled = (enable_irq_wake(client->irq) == 0);
+	} else if (ts->keep_power_in_suspend) {
+		for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+			error = elants_i2c_send(client, set_sleep_cmd,
+						sizeof(set_sleep_cmd));
+			if (!error)
+				break;
+
+			dev_err(&client->dev,
+				"suspend command failed: %d\n", error);
+		}
+	} else {
+		elants_i2c_power_off(ts);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused elants_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct elants_data *ts = i2c_get_clientdata(client);
+	const u8 set_active_cmd[] = { 0x54, 0x58, 0x00, 0x01 };
+	int retry_cnt;
+	int error;
+
+	if (device_may_wakeup(dev)) {
+		if (ts->wake_irq_enabled)
+			disable_irq_wake(client->irq);
+		elants_i2c_sw_reset(client);
+	} else if (ts->keep_power_in_suspend) {
+		for (retry_cnt = 0; retry_cnt < MAX_RETRIES; retry_cnt++) {
+			error = elants_i2c_send(client, set_active_cmd,
+						sizeof(set_active_cmd));
+			if (!error)
+				break;
+
+			dev_err(&client->dev,
+				"resume command failed: %d\n", error);
+		}
+	} else {
+		elants_i2c_power_on(ts);
+		elants_i2c_initialize(ts);
+	}
+
+	ts->state = ELAN_STATE_NORMAL;
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(elants_i2c_pm_ops,
+			 elants_i2c_suspend, elants_i2c_resume);
+
+static const struct i2c_device_id elants_i2c_id[] = {
+	{ DEVICE_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, elants_i2c_id);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id elants_acpi_id[] = {
+	{ "ELAN0001", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, elants_acpi_id);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id elants_of_match[] = {
+	{ .compatible = "elan,ekth3500" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, elants_of_match);
+#endif
+
+static struct i2c_driver elants_i2c_driver = {
+	.probe = elants_i2c_probe,
+	.id_table = elants_i2c_id,
+	.driver = {
+		.name = DEVICE_NAME,
+		.pm = &elants_i2c_pm_ops,
+		.acpi_match_table = ACPI_PTR(elants_acpi_id),
+		.of_match_table = of_match_ptr(elants_of_match),
+		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
+	},
+};
+module_i2c_driver(elants_i2c_driver);
+
+MODULE_AUTHOR("Scott Liu <scott.liu@emc.com.tw>");
+MODULE_DESCRIPTION("Elan I2c Touchscreen driver");
+MODULE_VERSION(DRV_VERSION);
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/elo.c b/drivers/input/touchscreen/elo.c
new file mode 100644
index 0000000..8051a4b
--- /dev/null
+++ b/drivers/input/touchscreen/elo.c
@@ -0,0 +1,407 @@
+/*
+ * Elo serial touchscreen driver
+ *
+ * Copyright (c) 2004 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * This driver can handle serial Elo touchscreens using either the Elo standard
+ * 'E271-2210' 10-byte protocol, Elo legacy 'E281A-4002' 6-byte protocol, Elo
+ * legacy 'E271-140' 4-byte protocol and Elo legacy 'E261-280' 3-byte protocol.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/ctype.h>
+
+#define DRIVER_DESC	"Elo serial touchscreen driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define ELO_MAX_LENGTH		10
+
+#define ELO10_PACKET_LEN	8
+#define ELO10_TOUCH		0x03
+#define ELO10_PRESSURE		0x80
+
+#define ELO10_LEAD_BYTE		'U'
+
+#define ELO10_ID_CMD		'i'
+
+#define ELO10_TOUCH_PACKET	'T'
+#define ELO10_ACK_PACKET	'A'
+#define ELI10_ID_PACKET		'I'
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct elo {
+	struct input_dev *dev;
+	struct serio *serio;
+	struct mutex cmd_mutex;
+	struct completion cmd_done;
+	int id;
+	int idx;
+	unsigned char expected_packet;
+	unsigned char csum;
+	unsigned char data[ELO_MAX_LENGTH];
+	unsigned char response[ELO10_PACKET_LEN];
+	char phys[32];
+};
+
+static void elo_process_data_10(struct elo *elo, unsigned char data)
+{
+	struct input_dev *dev = elo->dev;
+
+	elo->data[elo->idx] = data;
+
+	switch (elo->idx++) {
+	case 0:
+		elo->csum = 0xaa;
+		if (data != ELO10_LEAD_BYTE) {
+			dev_dbg(&elo->serio->dev,
+				"unsynchronized data: 0x%02x\n", data);
+			elo->idx = 0;
+		}
+		break;
+
+	case 9:
+		elo->idx = 0;
+		if (data != elo->csum) {
+			dev_dbg(&elo->serio->dev,
+				"bad checksum: 0x%02x, expected 0x%02x\n",
+				 data, elo->csum);
+			break;
+		}
+		if (elo->data[1] != elo->expected_packet) {
+			if (elo->data[1] != ELO10_TOUCH_PACKET)
+				dev_dbg(&elo->serio->dev,
+					"unexpected packet: 0x%02x\n",
+					 elo->data[1]);
+			break;
+		}
+		if (likely(elo->data[1] == ELO10_TOUCH_PACKET)) {
+			input_report_abs(dev, ABS_X, (elo->data[4] << 8) | elo->data[3]);
+			input_report_abs(dev, ABS_Y, (elo->data[6] << 8) | elo->data[5]);
+			if (elo->data[2] & ELO10_PRESSURE)
+				input_report_abs(dev, ABS_PRESSURE,
+						(elo->data[8] << 8) | elo->data[7]);
+			input_report_key(dev, BTN_TOUCH, elo->data[2] & ELO10_TOUCH);
+			input_sync(dev);
+		} else if (elo->data[1] == ELO10_ACK_PACKET) {
+			if (elo->data[2] == '0')
+				elo->expected_packet = ELO10_TOUCH_PACKET;
+			complete(&elo->cmd_done);
+		} else {
+			memcpy(elo->response, &elo->data[1], ELO10_PACKET_LEN);
+			elo->expected_packet = ELO10_ACK_PACKET;
+		}
+		break;
+	}
+	elo->csum += data;
+}
+
+static void elo_process_data_6(struct elo *elo, unsigned char data)
+{
+	struct input_dev *dev = elo->dev;
+
+	elo->data[elo->idx] = data;
+
+	switch (elo->idx++) {
+
+	case 0:
+		if ((data & 0xc0) != 0xc0)
+			elo->idx = 0;
+		break;
+
+	case 1:
+		if ((data & 0xc0) != 0x80)
+			elo->idx = 0;
+		break;
+
+	case 2:
+		if ((data & 0xc0) != 0x40)
+			elo->idx = 0;
+		break;
+
+	case 3:
+		if (data & 0xc0) {
+			elo->idx = 0;
+			break;
+		}
+
+		input_report_abs(dev, ABS_X, ((elo->data[0] & 0x3f) << 6) | (elo->data[1] & 0x3f));
+		input_report_abs(dev, ABS_Y, ((elo->data[2] & 0x3f) << 6) | (elo->data[3] & 0x3f));
+
+		if (elo->id == 2) {
+			input_report_key(dev, BTN_TOUCH, 1);
+			input_sync(dev);
+			elo->idx = 0;
+		}
+
+		break;
+
+	case 4:
+		if (data) {
+			input_sync(dev);
+			elo->idx = 0;
+		}
+		break;
+
+	case 5:
+		if ((data & 0xf0) == 0) {
+			input_report_abs(dev, ABS_PRESSURE, elo->data[5]);
+			input_report_key(dev, BTN_TOUCH, !!elo->data[5]);
+		}
+		input_sync(dev);
+		elo->idx = 0;
+		break;
+	}
+}
+
+static void elo_process_data_3(struct elo *elo, unsigned char data)
+{
+	struct input_dev *dev = elo->dev;
+
+	elo->data[elo->idx] = data;
+
+	switch (elo->idx++) {
+
+	case 0:
+		if ((data & 0x7f) != 0x01)
+			elo->idx = 0;
+		break;
+	case 2:
+		input_report_key(dev, BTN_TOUCH, !(elo->data[1] & 0x80));
+		input_report_abs(dev, ABS_X, elo->data[1]);
+		input_report_abs(dev, ABS_Y, elo->data[2]);
+		input_sync(dev);
+		elo->idx = 0;
+		break;
+	}
+}
+
+static irqreturn_t elo_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct elo *elo = serio_get_drvdata(serio);
+
+	switch (elo->id) {
+	case 0:
+		elo_process_data_10(elo, data);
+		break;
+
+	case 1:
+	case 2:
+		elo_process_data_6(elo, data);
+		break;
+
+	case 3:
+		elo_process_data_3(elo, data);
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int elo_command_10(struct elo *elo, unsigned char *packet)
+{
+	int rc = -1;
+	int i;
+	unsigned char csum = 0xaa + ELO10_LEAD_BYTE;
+
+	mutex_lock(&elo->cmd_mutex);
+
+	serio_pause_rx(elo->serio);
+	elo->expected_packet = toupper(packet[0]);
+	init_completion(&elo->cmd_done);
+	serio_continue_rx(elo->serio);
+
+	if (serio_write(elo->serio, ELO10_LEAD_BYTE))
+		goto out;
+
+	for (i = 0; i < ELO10_PACKET_LEN; i++) {
+		csum += packet[i];
+		if (serio_write(elo->serio, packet[i]))
+			goto out;
+	}
+
+	if (serio_write(elo->serio, csum))
+		goto out;
+
+	wait_for_completion_timeout(&elo->cmd_done, HZ);
+
+	if (elo->expected_packet == ELO10_TOUCH_PACKET) {
+		/* We are back in reporting mode, the command was ACKed */
+		memcpy(packet, elo->response, ELO10_PACKET_LEN);
+		rc = 0;
+	}
+
+ out:
+	mutex_unlock(&elo->cmd_mutex);
+	return rc;
+}
+
+static int elo_setup_10(struct elo *elo)
+{
+	static const char *elo_types[] = { "Accu", "Dura", "Intelli", "Carroll" };
+	struct input_dev *dev = elo->dev;
+	unsigned char packet[ELO10_PACKET_LEN] = { ELO10_ID_CMD };
+
+	if (elo_command_10(elo, packet))
+		return -1;
+
+	dev->id.version = (packet[5] << 8) | packet[4];
+
+	input_set_abs_params(dev, ABS_X, 96, 4000, 0, 0);
+	input_set_abs_params(dev, ABS_Y, 96, 4000, 0, 0);
+	if (packet[3] & ELO10_PRESSURE)
+		input_set_abs_params(dev, ABS_PRESSURE, 0, 255, 0, 0);
+
+	dev_info(&elo->serio->dev,
+		 "%sTouch touchscreen, fw: %02x.%02x, features: 0x%02x, controller: 0x%02x\n",
+		 elo_types[(packet[1] -'0') & 0x03],
+		 packet[5], packet[4], packet[3], packet[7]);
+
+	return 0;
+}
+
+/*
+ * elo_disconnect() is the opposite of elo_connect()
+ */
+
+static void elo_disconnect(struct serio *serio)
+{
+	struct elo *elo = serio_get_drvdata(serio);
+
+	input_get_device(elo->dev);
+	input_unregister_device(elo->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(elo->dev);
+	kfree(elo);
+}
+
+/*
+ * elo_connect() is the routine that is called when someone adds a
+ * new serio device that supports Gunze protocol and registers it as
+ * an input device.
+ */
+
+static int elo_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct elo *elo;
+	struct input_dev *input_dev;
+	int err;
+
+	elo = kzalloc(sizeof(struct elo), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!elo || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	elo->serio = serio;
+	elo->id = serio->id.id;
+	elo->dev = input_dev;
+	elo->expected_packet = ELO10_TOUCH_PACKET;
+	mutex_init(&elo->cmd_mutex);
+	init_completion(&elo->cmd_done);
+	snprintf(elo->phys, sizeof(elo->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "Elo Serial TouchScreen";
+	input_dev->phys = elo->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_ELO;
+	input_dev->id.product = elo->id;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	serio_set_drvdata(serio, elo);
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	switch (elo->id) {
+
+	case 0: /* 10-byte protocol */
+		if (elo_setup_10(elo))
+			goto fail3;
+
+		break;
+
+	case 1: /* 6-byte protocol */
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 15, 0, 0);
+
+	case 2: /* 4-byte protocol */
+		input_set_abs_params(input_dev, ABS_X, 96, 4000, 0, 0);
+		input_set_abs_params(input_dev, ABS_Y, 96, 4000, 0, 0);
+		break;
+
+	case 3: /* 3-byte protocol */
+		input_set_abs_params(input_dev, ABS_X, 0, 255, 0, 0);
+		input_set_abs_params(input_dev, ABS_Y, 0, 255, 0, 0);
+		break;
+	}
+
+	err = input_register_device(elo->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3: serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(elo);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id elo_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_ELO,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, elo_serio_ids);
+
+static struct serio_driver elo_drv = {
+	.driver		= {
+		.name	= "elo",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= elo_serio_ids,
+	.interrupt	= elo_interrupt,
+	.connect	= elo_connect,
+	.disconnect	= elo_disconnect,
+};
+
+module_serio_driver(elo_drv);
diff --git a/drivers/input/touchscreen/ft6236.c b/drivers/input/touchscreen/ft6236.c
new file mode 100644
index 0000000..d240d2e
--- /dev/null
+++ b/drivers/input/touchscreen/ft6236.c
@@ -0,0 +1,326 @@
+/*
+ * FocalTech FT6236 TouchScreen driver.
+ *
+ * Copyright (c) 2010  Focal tech Ltd.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/property.h>
+
+#define FT6236_MAX_TOUCH_POINTS		2
+
+#define FT6236_REG_TH_GROUP		0x80
+#define FT6236_REG_PERIODACTIVE		0x88
+#define FT6236_REG_LIB_VER_H		0xa1
+#define FT6236_REG_LIB_VER_L		0xa2
+#define FT6236_REG_CIPHER		0xa3
+#define FT6236_REG_FIRMID		0xa6
+#define FT6236_REG_FOCALTECH_ID		0xa8
+#define FT6236_REG_RELEASE_CODE_ID	0xaf
+
+#define FT6236_EVENT_PRESS_DOWN		0
+#define FT6236_EVENT_LIFT_UP		1
+#define FT6236_EVENT_CONTACT		2
+#define FT6236_EVENT_NO_EVENT		3
+
+struct ft6236_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct gpio_desc *reset_gpio;
+	u32 max_x;
+	u32 max_y;
+	bool invert_x;
+	bool invert_y;
+	bool swap_xy;
+};
+
+/*
+ * This struct is a touchpoint as stored in hardware.  Note that the id,
+ * as well as the event, are stored in the upper nybble of the hi byte.
+ */
+struct ft6236_touchpoint {
+	union {
+		u8 xhi;
+		u8 event;
+	};
+	u8 xlo;
+	union {
+		u8 yhi;
+		u8 id;
+	};
+	u8 ylo;
+	u8 weight;
+	u8 misc;
+} __packed;
+
+/* This packet represents the register map as read from offset 0 */
+struct ft6236_packet {
+	u8 dev_mode;
+	u8 gest_id;
+	u8 touches;
+	struct ft6236_touchpoint points[FT6236_MAX_TOUCH_POINTS];
+} __packed;
+
+static int ft6236_read(struct i2c_client *client, u8 reg, u8 len, void *data)
+{
+	int error;
+
+	error = i2c_smbus_read_i2c_block_data(client, reg, len, data);
+	if (error < 0)
+		return error;
+
+	if (error != len)
+		return -EIO;
+
+	return 0;
+}
+
+static irqreturn_t ft6236_interrupt(int irq, void *dev_id)
+{
+	struct ft6236_data *ft6236 = dev_id;
+	struct device *dev = &ft6236->client->dev;
+	struct input_dev *input = ft6236->input;
+	struct ft6236_packet buf;
+	u8 touches;
+	int i, error;
+
+	error = ft6236_read(ft6236->client, 0, sizeof(buf), &buf);
+	if (error) {
+		dev_err(dev, "read touchdata failed %d\n", error);
+		return IRQ_HANDLED;
+	}
+
+	touches = buf.touches & 0xf;
+	if (touches > FT6236_MAX_TOUCH_POINTS) {
+		dev_dbg(dev,
+			"%d touch points reported, only %d are supported\n",
+			touches, FT6236_MAX_TOUCH_POINTS);
+		touches = FT6236_MAX_TOUCH_POINTS;
+	}
+
+	for (i = 0; i < touches; i++) {
+		struct ft6236_touchpoint *point = &buf.points[i];
+		u16 x = ((point->xhi & 0xf) << 8) | buf.points[i].xlo;
+		u16 y = ((point->yhi & 0xf) << 8) | buf.points[i].ylo;
+		u8 event = point->event >> 6;
+		u8 id = point->id >> 4;
+		bool act = (event == FT6236_EVENT_PRESS_DOWN ||
+			    event == FT6236_EVENT_CONTACT);
+
+		input_mt_slot(input, id);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, act);
+		if (!act)
+			continue;
+
+		if (ft6236->invert_x)
+			x = ft6236->max_x - x;
+
+		if (ft6236->invert_y)
+			y = ft6236->max_y - y;
+
+		if (ft6236->swap_xy) {
+			input_report_abs(input, ABS_MT_POSITION_X, y);
+			input_report_abs(input, ABS_MT_POSITION_Y, x);
+		} else {
+			input_report_abs(input, ABS_MT_POSITION_X, x);
+			input_report_abs(input, ABS_MT_POSITION_Y, y);
+		}
+	}
+
+	input_mt_sync_frame(input);
+	input_sync(input);
+
+	return IRQ_HANDLED;
+}
+
+static u8 ft6236_debug_read_byte(struct ft6236_data *ft6236, u8 reg)
+{
+	struct i2c_client *client = ft6236->client;
+	u8 val = 0;
+	int error;
+
+	error = ft6236_read(client, reg, 1, &val);
+	if (error)
+		dev_dbg(&client->dev,
+			"error reading register 0x%02x: %d\n", reg, error);
+
+	return val;
+}
+
+static void ft6236_debug_info(struct ft6236_data *ft6236)
+{
+	struct device *dev = &ft6236->client->dev;
+
+	dev_dbg(dev, "Touch threshold is %d\n",
+		ft6236_debug_read_byte(ft6236, FT6236_REG_TH_GROUP) * 4);
+	dev_dbg(dev, "Report rate is %dHz\n",
+		ft6236_debug_read_byte(ft6236, FT6236_REG_PERIODACTIVE) * 10);
+	dev_dbg(dev, "Firmware library version 0x%02x%02x\n",
+		ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_H),
+		ft6236_debug_read_byte(ft6236, FT6236_REG_LIB_VER_L));
+	dev_dbg(dev, "Firmware version 0x%02x\n",
+		ft6236_debug_read_byte(ft6236, FT6236_REG_FIRMID));
+	dev_dbg(dev, "Chip vendor ID 0x%02x\n",
+		ft6236_debug_read_byte(ft6236, FT6236_REG_CIPHER));
+	dev_dbg(dev, "CTPM vendor ID 0x%02x\n",
+		ft6236_debug_read_byte(ft6236, FT6236_REG_FOCALTECH_ID));
+	dev_dbg(dev, "Release code version 0x%02x\n",
+		ft6236_debug_read_byte(ft6236, FT6236_REG_RELEASE_CODE_ID));
+}
+
+static void ft6236_reset(struct ft6236_data *ft6236)
+{
+	if (!ft6236->reset_gpio)
+		return;
+
+	gpiod_set_value_cansleep(ft6236->reset_gpio, 1);
+	usleep_range(5000, 20000);
+	gpiod_set_value_cansleep(ft6236->reset_gpio, 0);
+	msleep(300);
+}
+
+static int ft6236_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct ft6236_data *ft6236;
+	struct input_dev *input;
+	u32 fuzz_x = 0, fuzz_y = 0;
+	u8 val;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENXIO;
+
+	if (!client->irq) {
+		dev_err(dev, "irq is missing\n");
+		return -EINVAL;
+	}
+
+	ft6236 = devm_kzalloc(dev, sizeof(*ft6236), GFP_KERNEL);
+	if (!ft6236)
+		return -ENOMEM;
+
+	ft6236->client = client;
+	ft6236->reset_gpio = devm_gpiod_get_optional(dev, "reset",
+						     GPIOD_OUT_LOW);
+	if (IS_ERR(ft6236->reset_gpio)) {
+		error = PTR_ERR(ft6236->reset_gpio);
+		if (error != -EPROBE_DEFER)
+			dev_err(dev, "error getting reset gpio: %d\n", error);
+		return error;
+	}
+
+	ft6236_reset(ft6236);
+
+	/* verify that the controller is present */
+	error = ft6236_read(client, 0x00, 1, &val);
+	if (error) {
+		dev_err(dev, "failed to read from controller: %d\n", error);
+		return error;
+	}
+
+	ft6236_debug_info(ft6236);
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	ft6236->input = input;
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+
+	if (device_property_read_u32(dev, "touchscreen-size-x",
+				     &ft6236->max_x) ||
+	    device_property_read_u32(dev, "touchscreen-size-y",
+				     &ft6236->max_y)) {
+		dev_err(dev, "touchscreen-size-x and/or -y missing\n");
+		return -EINVAL;
+	}
+
+	device_property_read_u32(dev, "touchscreen-fuzz-x", &fuzz_x);
+	device_property_read_u32(dev, "touchscreen-fuzz-y", &fuzz_y);
+	ft6236->invert_x = device_property_read_bool(dev,
+						     "touchscreen-inverted-x");
+	ft6236->invert_y = device_property_read_bool(dev,
+						     "touchscreen-inverted-y");
+	ft6236->swap_xy = device_property_read_bool(dev,
+						    "touchscreen-swapped-x-y");
+
+	if (ft6236->swap_xy) {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+				     ft6236->max_y, fuzz_y, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+				     ft6236->max_x, fuzz_x, 0);
+	} else {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+				     ft6236->max_x, fuzz_x, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+				     ft6236->max_y, fuzz_y, 0);
+	}
+
+	error = input_mt_init_slots(input, FT6236_MAX_TOUCH_POINTS,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error)
+		return error;
+
+	error = devm_request_threaded_irq(dev, client->irq, NULL,
+					  ft6236_interrupt, IRQF_ONESHOT,
+					  client->name, ft6236);
+	if (error) {
+		dev_err(dev, "request irq %d failed: %d\n", client->irq, error);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "failed to register input device: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id ft6236_of_match[] = {
+	{ .compatible = "focaltech,ft6236", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ft6236_of_match);
+#endif
+
+static const struct i2c_device_id ft6236_id[] = {
+	{ "ft6236", },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ft6236_id);
+
+static struct i2c_driver ft6236_driver = {
+	.driver = {
+		.name = "ft6236",
+		.of_match_table = of_match_ptr(ft6236_of_match),
+	},
+	.probe = ft6236_probe,
+	.id_table = ft6236_id,
+};
+module_i2c_driver(ft6236_driver);
+
+MODULE_AUTHOR("Sean Cross <xobs@kosagi.com>");
+MODULE_AUTHOR("Noralf Trønnes <noralf@tronnes.org>");
+MODULE_DESCRIPTION("FocalTech FT6236 TouchScreen driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/fujitsu_ts.c b/drivers/input/touchscreen/fujitsu_ts.c
new file mode 100644
index 0000000..d0e46a7
--- /dev/null
+++ b/drivers/input/touchscreen/fujitsu_ts.c
@@ -0,0 +1,177 @@
+/*
+ * Fujitsu serial touchscreen driver
+ *
+ * Copyright (c) Dmitry Torokhov <dtor@mail.ru>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Fujitsu serial touchscreen driver"
+
+MODULE_AUTHOR("Dmitry Torokhov <dtor@mail.ru>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define FUJITSU_LENGTH 5
+
+/*
+ * Per-touchscreen data.
+ */
+struct fujitsu {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[FUJITSU_LENGTH];
+	char phys[32];
+};
+
+/*
+ * Decode serial data (5 bytes per packet)
+ * First byte
+ * 1 C 0 0 R S S S
+ * Where C is 1 while in calibration mode (which we don't use)
+ * R is 1 when no coordinate corection was done.
+ * S are button state
+ */
+static irqreturn_t fujitsu_interrupt(struct serio *serio,
+				     unsigned char data, unsigned int flags)
+{
+	struct fujitsu *fujitsu = serio_get_drvdata(serio);
+	struct input_dev *dev = fujitsu->dev;
+
+	if (fujitsu->idx == 0) {
+		/* resync skip until start of frame */
+		if ((data & 0xf0) != 0x80)
+			return IRQ_HANDLED;
+	} else {
+		/* resync skip garbage */
+		if (data & 0x80) {
+			fujitsu->idx = 0;
+			return IRQ_HANDLED;
+		}
+	}
+
+	fujitsu->data[fujitsu->idx++] = data;
+	if (fujitsu->idx == FUJITSU_LENGTH) {
+		input_report_abs(dev, ABS_X,
+				 (fujitsu->data[2] << 7) | fujitsu->data[1]);
+		input_report_abs(dev, ABS_Y,
+				 (fujitsu->data[4] << 7) | fujitsu->data[3]);
+		input_report_key(dev, BTN_TOUCH,
+				 (fujitsu->data[0] & 0x03) != 2);
+		input_sync(dev);
+		fujitsu->idx = 0;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * fujitsu_disconnect() is the opposite of fujitsu_connect()
+ */
+static void fujitsu_disconnect(struct serio *serio)
+{
+	struct fujitsu *fujitsu = serio_get_drvdata(serio);
+
+	input_get_device(fujitsu->dev);
+	input_unregister_device(fujitsu->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(fujitsu->dev);
+	kfree(fujitsu);
+}
+
+/*
+ * fujitsu_connect() is the routine that is called when someone adds a
+ * new serio device that supports the Fujitsu protocol and registers it
+ * as input device.
+ */
+static int fujitsu_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct fujitsu *fujitsu;
+	struct input_dev *input_dev;
+	int err;
+
+	fujitsu = kzalloc(sizeof(struct fujitsu), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!fujitsu || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	fujitsu->serio = serio;
+	fujitsu->dev = input_dev;
+	snprintf(fujitsu->phys, sizeof(fujitsu->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "Fujitsu Serial Touchscreen";
+	input_dev->phys = fujitsu->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_FUJITSU;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 4096, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 4096, 0, 0);
+	serio_set_drvdata(serio, fujitsu);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(fujitsu->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:
+	serio_close(serio);
+ fail2:
+	serio_set_drvdata(serio, NULL);
+ fail1:
+	input_free_device(input_dev);
+	kfree(fujitsu);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+static struct serio_device_id fujitsu_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_FUJITSU,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, fujitsu_serio_ids);
+
+static struct serio_driver fujitsu_drv = {
+	.driver		= {
+		.name	= "fujitsu_ts",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= fujitsu_serio_ids,
+	.interrupt	= fujitsu_interrupt,
+	.connect	= fujitsu_connect,
+	.disconnect	= fujitsu_disconnect,
+};
+
+module_serio_driver(fujitsu_drv);
diff --git a/drivers/input/touchscreen/goodix.c b/drivers/input/touchscreen/goodix.c
new file mode 100644
index 0000000..4d113c9
--- /dev/null
+++ b/drivers/input/touchscreen/goodix.c
@@ -0,0 +1,461 @@
+/*
+ *  Driver for Goodix Touchscreens
+ *
+ *  Copyright (c) 2014 Red Hat Inc.
+ *
+ *  This code is based on gt9xx.c authored by andrew@goodix.com:
+ *
+ *  2010 - 2012 Goodix Technology.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; version 2 of the License.
+ */
+
+#include <linux/kernel.h>
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/acpi.h>
+#include <linux/of.h>
+#include <asm/unaligned.h>
+
+struct goodix_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	int abs_x_max;
+	int abs_y_max;
+	unsigned int max_touch_num;
+	unsigned int int_trigger_type;
+	bool rotated_screen;
+};
+
+#define GOODIX_MAX_HEIGHT		4096
+#define GOODIX_MAX_WIDTH		4096
+#define GOODIX_INT_TRIGGER		1
+#define GOODIX_CONTACT_SIZE		8
+#define GOODIX_MAX_CONTACTS		10
+
+#define GOODIX_CONFIG_MAX_LENGTH	240
+
+/* Register defines */
+#define GOODIX_READ_COOR_ADDR		0x814E
+#define GOODIX_REG_CONFIG_DATA		0x8047
+#define GOODIX_REG_ID			0x8140
+
+#define RESOLUTION_LOC		1
+#define MAX_CONTACTS_LOC	5
+#define TRIGGER_LOC		6
+
+static const unsigned long goodix_irq_flags[] = {
+	IRQ_TYPE_EDGE_RISING,
+	IRQ_TYPE_EDGE_FALLING,
+	IRQ_TYPE_LEVEL_LOW,
+	IRQ_TYPE_LEVEL_HIGH,
+};
+
+/*
+ * Those tablets have their coordinates origin at the bottom right
+ * of the tablet, as if rotated 180 degrees
+ */
+static const struct dmi_system_id rotated_screen[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+	{
+		.ident = "WinBook TW100",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TW100")
+		}
+	},
+	{
+		.ident = "WinBook TW700",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TW700")
+		},
+	},
+#endif
+	{}
+};
+
+/**
+ * goodix_i2c_read - read data from a register of the i2c slave device.
+ *
+ * @client: i2c device.
+ * @reg: the register to read from.
+ * @buf: raw write data buffer.
+ * @len: length of the buffer to write
+ */
+static int goodix_i2c_read(struct i2c_client *client,
+			   u16 reg, u8 *buf, int len)
+{
+	struct i2c_msg msgs[2];
+	u16 wbuf = cpu_to_be16(reg);
+	int ret;
+
+	msgs[0].flags = 0;
+	msgs[0].addr  = client->addr;
+	msgs[0].len   = 2;
+	msgs[0].buf   = (u8 *)&wbuf;
+
+	msgs[1].flags = I2C_M_RD;
+	msgs[1].addr  = client->addr;
+	msgs[1].len   = len;
+	msgs[1].buf   = buf;
+
+	ret = i2c_transfer(client->adapter, msgs, 2);
+	return ret < 0 ? ret : (ret != ARRAY_SIZE(msgs) ? -EIO : 0);
+}
+
+static int goodix_ts_read_input_report(struct goodix_ts_data *ts, u8 *data)
+{
+	int touch_num;
+	int error;
+
+	error = goodix_i2c_read(ts->client, GOODIX_READ_COOR_ADDR, data,
+				GOODIX_CONTACT_SIZE + 1);
+	if (error) {
+		dev_err(&ts->client->dev, "I2C transfer error: %d\n", error);
+		return error;
+	}
+
+	if (!(data[0] & 0x80))
+		return -EAGAIN;
+
+	touch_num = data[0] & 0x0f;
+	if (touch_num > ts->max_touch_num)
+		return -EPROTO;
+
+	if (touch_num > 1) {
+		data += 1 + GOODIX_CONTACT_SIZE;
+		error = goodix_i2c_read(ts->client,
+					GOODIX_READ_COOR_ADDR +
+						1 + GOODIX_CONTACT_SIZE,
+					data,
+					GOODIX_CONTACT_SIZE * (touch_num - 1));
+		if (error)
+			return error;
+	}
+
+	return touch_num;
+}
+
+static void goodix_ts_report_touch(struct goodix_ts_data *ts, u8 *coor_data)
+{
+	int id = coor_data[0] & 0x0F;
+	int input_x = get_unaligned_le16(&coor_data[1]);
+	int input_y = get_unaligned_le16(&coor_data[3]);
+	int input_w = get_unaligned_le16(&coor_data[5]);
+
+	if (ts->rotated_screen) {
+		input_x = ts->abs_x_max - input_x;
+		input_y = ts->abs_y_max - input_y;
+	}
+
+	input_mt_slot(ts->input_dev, id);
+	input_mt_report_slot_state(ts->input_dev, MT_TOOL_FINGER, true);
+	input_report_abs(ts->input_dev, ABS_MT_POSITION_X, input_x);
+	input_report_abs(ts->input_dev, ABS_MT_POSITION_Y, input_y);
+	input_report_abs(ts->input_dev, ABS_MT_TOUCH_MAJOR, input_w);
+	input_report_abs(ts->input_dev, ABS_MT_WIDTH_MAJOR, input_w);
+}
+
+/**
+ * goodix_process_events - Process incoming events
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * Called when the IRQ is triggered. Read the current device state, and push
+ * the input events to the user space.
+ */
+static void goodix_process_events(struct goodix_ts_data *ts)
+{
+	u8  point_data[1 + GOODIX_CONTACT_SIZE * GOODIX_MAX_CONTACTS];
+	int touch_num;
+	int i;
+
+	touch_num = goodix_ts_read_input_report(ts, point_data);
+	if (touch_num < 0)
+		return;
+
+	for (i = 0; i < touch_num; i++)
+		goodix_ts_report_touch(ts,
+				&point_data[1 + GOODIX_CONTACT_SIZE * i]);
+
+	input_mt_sync_frame(ts->input_dev);
+	input_sync(ts->input_dev);
+}
+
+/**
+ * goodix_ts_irq_handler - The IRQ handler
+ *
+ * @irq: interrupt number.
+ * @dev_id: private data pointer.
+ */
+static irqreturn_t goodix_ts_irq_handler(int irq, void *dev_id)
+{
+	static const u8 end_cmd[] = {
+		GOODIX_READ_COOR_ADDR >> 8,
+		GOODIX_READ_COOR_ADDR & 0xff,
+		0
+	};
+	struct goodix_ts_data *ts = dev_id;
+
+	goodix_process_events(ts);
+
+	if (i2c_master_send(ts->client, end_cmd, sizeof(end_cmd)) < 0)
+		dev_err(&ts->client->dev, "I2C write end_cmd error\n");
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * goodix_read_config - Read the embedded configuration of the panel
+ *
+ * @ts: our goodix_ts_data pointer
+ *
+ * Must be called during probe
+ */
+static void goodix_read_config(struct goodix_ts_data *ts)
+{
+	u8 config[GOODIX_CONFIG_MAX_LENGTH];
+	int error;
+
+	error = goodix_i2c_read(ts->client, GOODIX_REG_CONFIG_DATA,
+				config,
+				GOODIX_CONFIG_MAX_LENGTH);
+	if (error) {
+		dev_warn(&ts->client->dev,
+			 "Error reading config (%d), using defaults\n",
+			 error);
+		ts->abs_x_max = GOODIX_MAX_WIDTH;
+		ts->abs_y_max = GOODIX_MAX_HEIGHT;
+		ts->int_trigger_type = GOODIX_INT_TRIGGER;
+		ts->max_touch_num = GOODIX_MAX_CONTACTS;
+		return;
+	}
+
+	ts->abs_x_max = get_unaligned_le16(&config[RESOLUTION_LOC]);
+	ts->abs_y_max = get_unaligned_le16(&config[RESOLUTION_LOC + 2]);
+	ts->int_trigger_type = config[TRIGGER_LOC] & 0x03;
+	ts->max_touch_num = config[MAX_CONTACTS_LOC] & 0x0f;
+	if (!ts->abs_x_max || !ts->abs_y_max || !ts->max_touch_num) {
+		dev_err(&ts->client->dev,
+			"Invalid config, using defaults\n");
+		ts->abs_x_max = GOODIX_MAX_WIDTH;
+		ts->abs_y_max = GOODIX_MAX_HEIGHT;
+		ts->max_touch_num = GOODIX_MAX_CONTACTS;
+	}
+
+	ts->rotated_screen = dmi_check_system(rotated_screen);
+	if (ts->rotated_screen)
+		dev_dbg(&ts->client->dev,
+			 "Applying '180 degrees rotated screen' quirk\n");
+}
+
+/**
+ * goodix_read_version - Read goodix touchscreen version
+ *
+ * @client: the i2c client
+ * @version: output buffer containing the version on success
+ * @id: output buffer containing the id on success
+ */
+static int goodix_read_version(struct i2c_client *client, u16 *version, u16 *id)
+{
+	int error;
+	u8 buf[6];
+	char id_str[5];
+
+	error = goodix_i2c_read(client, GOODIX_REG_ID, buf, sizeof(buf));
+	if (error) {
+		dev_err(&client->dev, "read version failed: %d\n", error);
+		return error;
+	}
+
+	memcpy(id_str, buf, 4);
+	id_str[4] = 0;
+	if (kstrtou16(id_str, 10, id))
+		*id = 0x1001;
+
+	*version = get_unaligned_le16(&buf[4]);
+
+	dev_info(&client->dev, "ID %d, version: %04x\n", *id, *version);
+
+	return 0;
+}
+
+/**
+ * goodix_i2c_test - I2C test function to check if the device answers.
+ *
+ * @client: the i2c client
+ */
+static int goodix_i2c_test(struct i2c_client *client)
+{
+	int retry = 0;
+	int error;
+	u8 test;
+
+	while (retry++ < 2) {
+		error = goodix_i2c_read(client, GOODIX_REG_CONFIG_DATA,
+					&test, 1);
+		if (!error)
+			return 0;
+
+		dev_err(&client->dev, "i2c test failed attempt %d: %d\n",
+			retry, error);
+		msleep(20);
+	}
+
+	return error;
+}
+
+/**
+ * goodix_request_input_dev - Allocate, populate and register the input device
+ *
+ * @ts: our goodix_ts_data pointer
+ * @version: device firmware version
+ * @id: device ID
+ *
+ * Must be called during probe
+ */
+static int goodix_request_input_dev(struct goodix_ts_data *ts, u16 version,
+				    u16 id)
+{
+	int error;
+
+	ts->input_dev = devm_input_allocate_device(&ts->client->dev);
+	if (!ts->input_dev) {
+		dev_err(&ts->client->dev, "Failed to allocate input device.");
+		return -ENOMEM;
+	}
+
+	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_X,
+			     0, ts->abs_x_max, 0, 0);
+	input_set_abs_params(ts->input_dev, ABS_MT_POSITION_Y,
+			     0, ts->abs_y_max, 0, 0);
+	input_set_abs_params(ts->input_dev, ABS_MT_WIDTH_MAJOR, 0, 255, 0, 0);
+	input_set_abs_params(ts->input_dev, ABS_MT_TOUCH_MAJOR, 0, 255, 0, 0);
+
+	input_mt_init_slots(ts->input_dev, ts->max_touch_num,
+			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+
+	ts->input_dev->name = "Goodix Capacitive TouchScreen";
+	ts->input_dev->phys = "input/ts";
+	ts->input_dev->id.bustype = BUS_I2C;
+	ts->input_dev->id.vendor = 0x0416;
+	ts->input_dev->id.product = id;
+	ts->input_dev->id.version = version;
+
+	error = input_register_device(ts->input_dev);
+	if (error) {
+		dev_err(&ts->client->dev,
+			"Failed to register input device: %d", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int goodix_ts_probe(struct i2c_client *client,
+			   const struct i2c_device_id *id)
+{
+	struct goodix_ts_data *ts;
+	unsigned long irq_flags;
+	int error;
+	u16 version_info, id_info;
+
+	dev_dbg(&client->dev, "I2C Address: 0x%02x\n", client->addr);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "I2C check functionality failed.\n");
+		return -ENXIO;
+	}
+
+	ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->client = client;
+	i2c_set_clientdata(client, ts);
+
+	error = goodix_i2c_test(client);
+	if (error) {
+		dev_err(&client->dev, "I2C communication failure: %d\n", error);
+		return error;
+	}
+
+	error = goodix_read_version(client, &version_info, &id_info);
+	if (error) {
+		dev_err(&client->dev, "Read version failed.\n");
+		return error;
+	}
+
+	goodix_read_config(ts);
+
+	error = goodix_request_input_dev(ts, version_info, id_info);
+	if (error)
+		return error;
+
+	irq_flags = goodix_irq_flags[ts->int_trigger_type] | IRQF_ONESHOT;
+	error = devm_request_threaded_irq(&ts->client->dev, client->irq,
+					  NULL, goodix_ts_irq_handler,
+					  irq_flags, client->name, ts);
+	if (error) {
+		dev_err(&client->dev, "request IRQ failed: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id goodix_ts_id[] = {
+	{ "GDIX1001:00", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, goodix_ts_id);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id goodix_acpi_match[] = {
+	{ "GDIX1001", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, goodix_acpi_match);
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id goodix_of_match[] = {
+	{ .compatible = "goodix,gt911" },
+	{ .compatible = "goodix,gt9110" },
+	{ .compatible = "goodix,gt912" },
+	{ .compatible = "goodix,gt927" },
+	{ .compatible = "goodix,gt9271" },
+	{ .compatible = "goodix,gt928" },
+	{ .compatible = "goodix,gt967" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, goodix_of_match);
+#endif
+
+static struct i2c_driver goodix_ts_driver = {
+	.probe = goodix_ts_probe,
+	.id_table = goodix_ts_id,
+	.driver = {
+		.name = "Goodix-TS",
+		.acpi_match_table = ACPI_PTR(goodix_acpi_match),
+		.of_match_table = of_match_ptr(goodix_of_match),
+	},
+};
+module_i2c_driver(goodix_ts_driver);
+
+MODULE_AUTHOR("Benjamin Tissoires <benjamin.tissoires@gmail.com>");
+MODULE_AUTHOR("Bastien Nocera <hadess@hadess.net>");
+MODULE_DESCRIPTION("Goodix touchscreen driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/gunze.c b/drivers/input/touchscreen/gunze.c
new file mode 100644
index 0000000..e2ee626
--- /dev/null
+++ b/drivers/input/touchscreen/gunze.c
@@ -0,0 +1,188 @@
+/*
+ *  Copyright (c) 2000-2001 Vojtech Pavlik
+ */
+
+/*
+ * Gunze AHL-51S touchscreen driver for Linux
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Gunze AHL-51S touchscreen driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define	GUNZE_MAX_LENGTH	10
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct gunze {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[GUNZE_MAX_LENGTH];
+	char phys[32];
+};
+
+static void gunze_process_packet(struct gunze* gunze)
+{
+	struct input_dev *dev = gunze->dev;
+
+	if (gunze->idx != GUNZE_MAX_LENGTH || gunze->data[5] != ',' ||
+		(gunze->data[0] != 'T' && gunze->data[0] != 'R')) {
+		printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data);
+		return;
+	}
+
+	input_report_abs(dev, ABS_X, simple_strtoul(gunze->data + 1, NULL, 10));
+	input_report_abs(dev, ABS_Y, 1024 - simple_strtoul(gunze->data + 6, NULL, 10));
+	input_report_key(dev, BTN_TOUCH, gunze->data[0] == 'T');
+	input_sync(dev);
+}
+
+static irqreturn_t gunze_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct gunze* gunze = serio_get_drvdata(serio);
+
+	if (data == '\r') {
+		gunze_process_packet(gunze);
+		gunze->idx = 0;
+	} else {
+		if (gunze->idx < GUNZE_MAX_LENGTH)
+			gunze->data[gunze->idx++] = data;
+	}
+	return IRQ_HANDLED;
+}
+
+/*
+ * gunze_disconnect() is the opposite of gunze_connect()
+ */
+
+static void gunze_disconnect(struct serio *serio)
+{
+	struct gunze *gunze = serio_get_drvdata(serio);
+
+	input_get_device(gunze->dev);
+	input_unregister_device(gunze->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(gunze->dev);
+	kfree(gunze);
+}
+
+/*
+ * gunze_connect() is the routine that is called when someone adds a
+ * new serio device that supports Gunze protocol and registers it as
+ * an input device.
+ */
+
+static int gunze_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct gunze *gunze;
+	struct input_dev *input_dev;
+	int err;
+
+	gunze = kzalloc(sizeof(struct gunze), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!gunze || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	gunze->serio = serio;
+	gunze->dev = input_dev;
+	snprintf(gunze->phys, sizeof(serio->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "Gunze AHL-51S TouchScreen";
+	input_dev->phys = gunze->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_GUNZE;
+	input_dev->id.product = 0x0051;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, 24, 1000, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 24, 1000, 0, 0);
+
+	serio_set_drvdata(serio, gunze);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(gunze->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(gunze);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id gunze_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_GUNZE,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, gunze_serio_ids);
+
+static struct serio_driver gunze_drv = {
+	.driver		= {
+		.name	= "gunze",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= gunze_serio_ids,
+	.interrupt	= gunze_interrupt,
+	.connect	= gunze_connect,
+	.disconnect	= gunze_disconnect,
+};
+
+module_serio_driver(gunze_drv);
diff --git a/drivers/input/touchscreen/hampshire.c b/drivers/input/touchscreen/hampshire.c
new file mode 100644
index 0000000..ecb1e0e
--- /dev/null
+++ b/drivers/input/touchscreen/hampshire.c
@@ -0,0 +1,189 @@
+/*
+ * Hampshire serial touchscreen driver
+ *
+ * Copyright (c) 2010 Adam Bennett
+ * Based on the dynapro driver (c) Tias Guns
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2010/04/08 Adam Bennett <abennett72@gmail.com>
+ *   Copied dynapro.c and edited for Hampshire 4-byte protocol
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Hampshire serial touchscreen driver"
+
+MODULE_AUTHOR("Adam Bennett <abennett72@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define HAMPSHIRE_FORMAT_TOUCH_BIT 0x40
+#define HAMPSHIRE_FORMAT_LENGTH 4
+#define HAMPSHIRE_RESPONSE_BEGIN_BYTE 0x80
+
+#define HAMPSHIRE_MIN_XC 0
+#define HAMPSHIRE_MAX_XC 0x1000
+#define HAMPSHIRE_MIN_YC 0
+#define HAMPSHIRE_MAX_YC 0x1000
+
+#define HAMPSHIRE_GET_XC(data) (((data[3] & 0x0c) >> 2) | (data[1] << 2) | ((data[0] & 0x38) << 6))
+#define HAMPSHIRE_GET_YC(data) ((data[3] & 0x03) | (data[2] << 2) | ((data[0] & 0x07) << 9))
+#define HAMPSHIRE_GET_TOUCHED(data) (HAMPSHIRE_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct hampshire {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[HAMPSHIRE_FORMAT_LENGTH];
+	char phys[32];
+};
+
+static void hampshire_process_data(struct hampshire *phampshire)
+{
+	struct input_dev *dev = phampshire->dev;
+
+	if (HAMPSHIRE_FORMAT_LENGTH == ++phampshire->idx) {
+		input_report_abs(dev, ABS_X, HAMPSHIRE_GET_XC(phampshire->data));
+		input_report_abs(dev, ABS_Y, HAMPSHIRE_GET_YC(phampshire->data));
+		input_report_key(dev, BTN_TOUCH,
+				 HAMPSHIRE_GET_TOUCHED(phampshire->data));
+		input_sync(dev);
+
+		phampshire->idx = 0;
+	}
+}
+
+static irqreturn_t hampshire_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct hampshire *phampshire = serio_get_drvdata(serio);
+
+	phampshire->data[phampshire->idx] = data;
+
+	if (HAMPSHIRE_RESPONSE_BEGIN_BYTE & phampshire->data[0])
+		hampshire_process_data(phampshire);
+	else
+		dev_dbg(&serio->dev, "unknown/unsynchronized data: %x\n",
+			phampshire->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+static void hampshire_disconnect(struct serio *serio)
+{
+	struct hampshire *phampshire = serio_get_drvdata(serio);
+
+	input_get_device(phampshire->dev);
+	input_unregister_device(phampshire->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(phampshire->dev);
+	kfree(phampshire);
+}
+
+/*
+ * hampshire_connect() is the routine that is called when someone adds a
+ * new serio device that supports hampshire protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int hampshire_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct hampshire *phampshire;
+	struct input_dev *input_dev;
+	int err;
+
+	phampshire = kzalloc(sizeof(struct hampshire), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!phampshire || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	phampshire->serio = serio;
+	phampshire->dev = input_dev;
+	snprintf(phampshire->phys, sizeof(phampshire->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "Hampshire Serial TouchScreen";
+	input_dev->phys = phampshire->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_HAMPSHIRE;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(phampshire->dev, ABS_X,
+			     HAMPSHIRE_MIN_XC, HAMPSHIRE_MAX_XC, 0, 0);
+	input_set_abs_params(phampshire->dev, ABS_Y,
+			     HAMPSHIRE_MIN_YC, HAMPSHIRE_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, phampshire);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(phampshire->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(phampshire);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id hampshire_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_HAMPSHIRE,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, hampshire_serio_ids);
+
+static struct serio_driver hampshire_drv = {
+	.driver		= {
+		.name	= "hampshire",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= hampshire_serio_ids,
+	.interrupt	= hampshire_interrupt,
+	.connect	= hampshire_connect,
+	.disconnect	= hampshire_disconnect,
+};
+
+module_serio_driver(hampshire_drv);
diff --git a/drivers/input/touchscreen/hp680_ts_input.c b/drivers/input/touchscreen/hp680_ts_input.c
new file mode 100644
index 0000000..85cf9be
--- /dev/null
+++ b/drivers/input/touchscreen/hp680_ts_input.c
@@ -0,0 +1,127 @@
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <asm/io.h>
+#include <asm/delay.h>
+#include <asm/adc.h>
+#include <mach/hp6xx.h>
+
+#define MODNAME "hp680_ts_input"
+
+#define HP680_TS_ABS_X_MIN	40
+#define HP680_TS_ABS_X_MAX	950
+#define HP680_TS_ABS_Y_MIN	80
+#define HP680_TS_ABS_Y_MAX	910
+
+#define	PHDR	0xa400012e
+#define SCPDR	0xa4000136
+
+static void do_softint(struct work_struct *work);
+
+static struct input_dev *hp680_ts_dev;
+static DECLARE_DELAYED_WORK(work, do_softint);
+
+static void do_softint(struct work_struct *work)
+{
+	int absx = 0, absy = 0;
+	u8 scpdr;
+	int touched = 0;
+
+	if (__raw_readb(PHDR) & PHDR_TS_PEN_DOWN) {
+		scpdr = __raw_readb(SCPDR);
+		scpdr |= SCPDR_TS_SCAN_ENABLE;
+		scpdr &= ~SCPDR_TS_SCAN_Y;
+		__raw_writeb(scpdr, SCPDR);
+		udelay(30);
+
+		absy = adc_single(ADC_CHANNEL_TS_Y);
+
+		scpdr = __raw_readb(SCPDR);
+		scpdr |= SCPDR_TS_SCAN_Y;
+		scpdr &= ~SCPDR_TS_SCAN_X;
+		__raw_writeb(scpdr, SCPDR);
+		udelay(30);
+
+		absx = adc_single(ADC_CHANNEL_TS_X);
+
+		scpdr = __raw_readb(SCPDR);
+		scpdr |= SCPDR_TS_SCAN_X;
+		scpdr &= ~SCPDR_TS_SCAN_ENABLE;
+		__raw_writeb(scpdr, SCPDR);
+		udelay(100);
+		touched = __raw_readb(PHDR) & PHDR_TS_PEN_DOWN;
+	}
+
+	if (touched) {
+		input_report_key(hp680_ts_dev, BTN_TOUCH, 1);
+		input_report_abs(hp680_ts_dev, ABS_X, absx);
+		input_report_abs(hp680_ts_dev, ABS_Y, absy);
+	} else {
+		input_report_key(hp680_ts_dev, BTN_TOUCH, 0);
+	}
+
+	input_sync(hp680_ts_dev);
+	enable_irq(HP680_TS_IRQ);
+}
+
+static irqreturn_t hp680_ts_interrupt(int irq, void *dev)
+{
+	disable_irq_nosync(irq);
+	schedule_delayed_work(&work, HZ / 20);
+
+	return IRQ_HANDLED;
+}
+
+static int __init hp680_ts_init(void)
+{
+	int err;
+
+	hp680_ts_dev = input_allocate_device();
+	if (!hp680_ts_dev)
+		return -ENOMEM;
+
+	hp680_ts_dev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
+	hp680_ts_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(hp680_ts_dev, ABS_X,
+		HP680_TS_ABS_X_MIN, HP680_TS_ABS_X_MAX, 0, 0);
+	input_set_abs_params(hp680_ts_dev, ABS_Y,
+		HP680_TS_ABS_Y_MIN, HP680_TS_ABS_Y_MAX, 0, 0);
+
+	hp680_ts_dev->name = "HP Jornada touchscreen";
+	hp680_ts_dev->phys = "hp680_ts/input0";
+
+	if (request_irq(HP680_TS_IRQ, hp680_ts_interrupt,
+			0, MODNAME, NULL) < 0) {
+		printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n",
+		       HP680_TS_IRQ);
+		err = -EBUSY;
+		goto fail1;
+	}
+
+	err = input_register_device(hp680_ts_dev);
+	if (err)
+		goto fail2;
+
+	return 0;
+
+ fail2:	free_irq(HP680_TS_IRQ, NULL);
+	cancel_delayed_work_sync(&work);
+ fail1:	input_free_device(hp680_ts_dev);
+	return err;
+}
+
+static void __exit hp680_ts_exit(void)
+{
+	free_irq(HP680_TS_IRQ, NULL);
+	cancel_delayed_work_sync(&work);
+	input_unregister_device(hp680_ts_dev);
+}
+
+module_init(hp680_ts_init);
+module_exit(hp680_ts_exit);
+
+MODULE_AUTHOR("Andriy Skulysh, askulysh@image.kiev.ua");
+MODULE_DESCRIPTION("HP Jornada 680 touchscreen driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/htcpen.c b/drivers/input/touchscreen/htcpen.c
new file mode 100644
index 0000000..92e2243
--- /dev/null
+++ b/drivers/input/touchscreen/htcpen.c
@@ -0,0 +1,248 @@
+/*
+ * HTC Shift touchscreen driver
+ *
+ * Copyright (C) 2008 Pau Oliva Fora <pof@eslack.org>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/isa.h>
+#include <linux/ioport.h>
+#include <linux/dmi.h>
+
+MODULE_AUTHOR("Pau Oliva Fora <pau@eslack.org>");
+MODULE_DESCRIPTION("HTC Shift touchscreen driver");
+MODULE_LICENSE("GPL");
+
+#define HTCPEN_PORT_IRQ_CLEAR	0x068
+#define HTCPEN_PORT_INIT	0x06c
+#define HTCPEN_PORT_INDEX	0x0250
+#define HTCPEN_PORT_DATA	0x0251
+#define HTCPEN_IRQ		3
+
+#define DEVICE_ENABLE		0xa2
+#define DEVICE_DISABLE		0xa3
+
+#define X_INDEX			3
+#define Y_INDEX			5
+#define TOUCH_INDEX		0xb
+#define LSB_XY_INDEX		0xc
+#define X_AXIS_MAX		2040
+#define Y_AXIS_MAX		2040
+
+static bool invert_x;
+module_param(invert_x, bool, 0644);
+MODULE_PARM_DESC(invert_x, "If set, X axis is inverted");
+static bool invert_y;
+module_param(invert_y, bool, 0644);
+MODULE_PARM_DESC(invert_y, "If set, Y axis is inverted");
+
+static irqreturn_t htcpen_interrupt(int irq, void *handle)
+{
+	struct input_dev *htcpen_dev = handle;
+	unsigned short x, y, xy;
+
+	/* 0 = press; 1 = release */
+	outb_p(TOUCH_INDEX, HTCPEN_PORT_INDEX);
+
+	if (inb_p(HTCPEN_PORT_DATA)) {
+		input_report_key(htcpen_dev, BTN_TOUCH, 0);
+	} else {
+		outb_p(X_INDEX, HTCPEN_PORT_INDEX);
+		x = inb_p(HTCPEN_PORT_DATA);
+
+		outb_p(Y_INDEX, HTCPEN_PORT_INDEX);
+		y = inb_p(HTCPEN_PORT_DATA);
+
+		outb_p(LSB_XY_INDEX, HTCPEN_PORT_INDEX);
+		xy = inb_p(HTCPEN_PORT_DATA);
+
+		/* get high resolution value of X and Y using LSB */
+		x = X_AXIS_MAX - ((x * 8) + ((xy >> 4) & 0xf));
+		y = (y * 8) + (xy & 0xf);
+		if (invert_x)
+			x = X_AXIS_MAX - x;
+		if (invert_y)
+			y = Y_AXIS_MAX - y;
+
+		if (x != X_AXIS_MAX && x != 0) {
+			input_report_key(htcpen_dev, BTN_TOUCH, 1);
+			input_report_abs(htcpen_dev, ABS_X, x);
+			input_report_abs(htcpen_dev, ABS_Y, y);
+		}
+	}
+
+	input_sync(htcpen_dev);
+
+	inb_p(HTCPEN_PORT_IRQ_CLEAR);
+
+	return IRQ_HANDLED;
+}
+
+static int htcpen_open(struct input_dev *dev)
+{
+	outb_p(DEVICE_ENABLE, HTCPEN_PORT_INIT);
+
+	return 0;
+}
+
+static void htcpen_close(struct input_dev *dev)
+{
+	outb_p(DEVICE_DISABLE, HTCPEN_PORT_INIT);
+	synchronize_irq(HTCPEN_IRQ);
+}
+
+static int htcpen_isa_probe(struct device *dev, unsigned int id)
+{
+	struct input_dev *htcpen_dev;
+	int err = -EBUSY;
+
+	if (!request_region(HTCPEN_PORT_IRQ_CLEAR, 1, "htcpen")) {
+		printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n",
+			HTCPEN_PORT_IRQ_CLEAR);
+		goto request_region1_failed;
+	}
+
+	if (!request_region(HTCPEN_PORT_INIT, 1, "htcpen")) {
+		printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n",
+			HTCPEN_PORT_INIT);
+		goto request_region2_failed;
+	}
+
+	if (!request_region(HTCPEN_PORT_INDEX, 2, "htcpen")) {
+		printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n",
+			HTCPEN_PORT_INDEX);
+		goto request_region3_failed;
+	}
+
+	htcpen_dev = input_allocate_device();
+	if (!htcpen_dev) {
+		printk(KERN_ERR "htcpen: can't allocate device\n");
+		err = -ENOMEM;
+		goto input_alloc_failed;
+	}
+
+	htcpen_dev->name = "HTC Shift EC TouchScreen";
+	htcpen_dev->id.bustype = BUS_ISA;
+
+	htcpen_dev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
+	htcpen_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(htcpen_dev, ABS_X, 0, X_AXIS_MAX, 0, 0);
+	input_set_abs_params(htcpen_dev, ABS_Y, 0, Y_AXIS_MAX, 0, 0);
+
+	htcpen_dev->open = htcpen_open;
+	htcpen_dev->close = htcpen_close;
+
+	err = request_irq(HTCPEN_IRQ, htcpen_interrupt, 0, "htcpen",
+			htcpen_dev);
+	if (err) {
+		printk(KERN_ERR "htcpen: irq busy\n");
+		goto request_irq_failed;
+	}
+
+	inb_p(HTCPEN_PORT_IRQ_CLEAR);
+
+	err = input_register_device(htcpen_dev);
+	if (err)
+		goto input_register_failed;
+
+	dev_set_drvdata(dev, htcpen_dev);
+
+	return 0;
+
+ input_register_failed:
+	free_irq(HTCPEN_IRQ, htcpen_dev);
+ request_irq_failed:
+	input_free_device(htcpen_dev);
+ input_alloc_failed:
+	release_region(HTCPEN_PORT_INDEX, 2);
+ request_region3_failed:
+	release_region(HTCPEN_PORT_INIT, 1);
+ request_region2_failed:
+	release_region(HTCPEN_PORT_IRQ_CLEAR, 1);
+ request_region1_failed:
+	return err;
+}
+
+static int htcpen_isa_remove(struct device *dev, unsigned int id)
+{
+	struct input_dev *htcpen_dev = dev_get_drvdata(dev);
+
+	input_unregister_device(htcpen_dev);
+
+	free_irq(HTCPEN_IRQ, htcpen_dev);
+
+	release_region(HTCPEN_PORT_INDEX, 2);
+	release_region(HTCPEN_PORT_INIT, 1);
+	release_region(HTCPEN_PORT_IRQ_CLEAR, 1);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int htcpen_isa_suspend(struct device *dev, unsigned int n,
+				pm_message_t state)
+{
+	outb_p(DEVICE_DISABLE, HTCPEN_PORT_INIT);
+
+	return 0;
+}
+
+static int htcpen_isa_resume(struct device *dev, unsigned int n)
+{
+	outb_p(DEVICE_ENABLE, HTCPEN_PORT_INIT);
+
+	return 0;
+}
+#endif
+
+static struct isa_driver htcpen_isa_driver = {
+	.probe		= htcpen_isa_probe,
+	.remove		= htcpen_isa_remove,
+#ifdef CONFIG_PM
+	.suspend	= htcpen_isa_suspend,
+	.resume		= htcpen_isa_resume,
+#endif
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "htcpen",
+	}
+};
+
+static struct dmi_system_id htcshift_dmi_table[] __initdata = {
+	{
+		.ident = "Shift",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "High Tech Computer Corp"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "Shift"),
+		},
+	},
+	{ }
+};
+MODULE_DEVICE_TABLE(dmi, htcshift_dmi_table);
+
+static int __init htcpen_isa_init(void)
+{
+	if (!dmi_check_system(htcshift_dmi_table))
+		return -ENODEV;
+
+	return isa_register_driver(&htcpen_isa_driver, 1);
+}
+
+static void __exit htcpen_isa_exit(void)
+{
+	isa_unregister_driver(&htcpen_isa_driver);
+}
+
+module_init(htcpen_isa_init);
+module_exit(htcpen_isa_exit);
diff --git a/drivers/input/touchscreen/ili210x.c b/drivers/input/touchscreen/ili210x.c
new file mode 100644
index 0000000..ddf694b
--- /dev/null
+++ b/drivers/input/touchscreen/ili210x.c
@@ -0,0 +1,357 @@
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/input/ili210x.h>
+
+#define MAX_TOUCHES		2
+#define DEFAULT_POLL_PERIOD	20
+
+/* Touchscreen commands */
+#define REG_TOUCHDATA		0x10
+#define REG_PANEL_INFO		0x20
+#define REG_FIRMWARE_VERSION	0x40
+#define REG_CALIBRATE		0xcc
+
+struct finger {
+	u8 x_low;
+	u8 x_high;
+	u8 y_low;
+	u8 y_high;
+} __packed;
+
+struct touchdata {
+	u8 status;
+	struct finger finger[MAX_TOUCHES];
+} __packed;
+
+struct panel_info {
+	struct finger finger_max;
+	u8 xchannel_num;
+	u8 ychannel_num;
+} __packed;
+
+struct firmware_version {
+	u8 id;
+	u8 major;
+	u8 minor;
+} __packed;
+
+struct ili210x {
+	struct i2c_client *client;
+	struct input_dev *input;
+	bool (*get_pendown_state)(void);
+	unsigned int poll_period;
+	struct delayed_work dwork;
+};
+
+static int ili210x_read_reg(struct i2c_client *client, u8 reg, void *buf,
+			    size_t len)
+{
+	struct i2c_msg msg[2] = {
+		{
+			.addr	= client->addr,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= &reg,
+		},
+		{
+			.addr	= client->addr,
+			.flags	= I2C_M_RD,
+			.len	= len,
+			.buf	= buf,
+		}
+	};
+
+	if (i2c_transfer(client->adapter, msg, 2) != 2) {
+		dev_err(&client->dev, "i2c transfer failed\n");
+		return -EIO;
+	}
+
+	return 0;
+}
+
+static void ili210x_report_events(struct input_dev *input,
+				  const struct touchdata *touchdata)
+{
+	int i;
+	bool touch;
+	unsigned int x, y;
+	const struct finger *finger;
+
+	for (i = 0; i < MAX_TOUCHES; i++) {
+		input_mt_slot(input, i);
+
+		finger = &touchdata->finger[i];
+
+		touch = touchdata->status & (1 << i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
+		if (touch) {
+			x = finger->x_low | (finger->x_high << 8);
+			y = finger->y_low | (finger->y_high << 8);
+
+			input_report_abs(input, ABS_MT_POSITION_X, x);
+			input_report_abs(input, ABS_MT_POSITION_Y, y);
+		}
+	}
+
+	input_mt_report_pointer_emulation(input, false);
+	input_sync(input);
+}
+
+static bool get_pendown_state(const struct ili210x *priv)
+{
+	bool state = false;
+
+	if (priv->get_pendown_state)
+		state = priv->get_pendown_state();
+
+	return state;
+}
+
+static void ili210x_work(struct work_struct *work)
+{
+	struct ili210x *priv = container_of(work, struct ili210x,
+					    dwork.work);
+	struct i2c_client *client = priv->client;
+	struct touchdata touchdata;
+	int error;
+
+	error = ili210x_read_reg(client, REG_TOUCHDATA,
+				 &touchdata, sizeof(touchdata));
+	if (error) {
+		dev_err(&client->dev,
+			"Unable to get touchdata, err = %d\n", error);
+		return;
+	}
+
+	ili210x_report_events(priv->input, &touchdata);
+
+	if ((touchdata.status & 0xf3) || get_pendown_state(priv))
+		schedule_delayed_work(&priv->dwork,
+				      msecs_to_jiffies(priv->poll_period));
+}
+
+static irqreturn_t ili210x_irq(int irq, void *irq_data)
+{
+	struct ili210x *priv = irq_data;
+
+	schedule_delayed_work(&priv->dwork, 0);
+
+	return IRQ_HANDLED;
+}
+
+static ssize_t ili210x_calibrate(struct device *dev,
+				 struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct ili210x *priv = i2c_get_clientdata(client);
+	unsigned long calibrate;
+	int rc;
+	u8 cmd = REG_CALIBRATE;
+
+	if (kstrtoul(buf, 10, &calibrate))
+		return -EINVAL;
+
+	if (calibrate > 1)
+		return -EINVAL;
+
+	if (calibrate) {
+		rc = i2c_master_send(priv->client, &cmd, sizeof(cmd));
+		if (rc != sizeof(cmd))
+			return -EIO;
+	}
+
+	return count;
+}
+static DEVICE_ATTR(calibrate, 0644, NULL, ili210x_calibrate);
+
+static struct attribute *ili210x_attributes[] = {
+	&dev_attr_calibrate.attr,
+	NULL,
+};
+
+static const struct attribute_group ili210x_attr_group = {
+	.attrs = ili210x_attributes,
+};
+
+static int ili210x_i2c_probe(struct i2c_client *client,
+				       const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	const struct ili210x_platform_data *pdata = dev_get_platdata(dev);
+	struct ili210x *priv;
+	struct input_dev *input;
+	struct panel_info panel;
+	struct firmware_version firmware;
+	int xmax, ymax;
+	int error;
+
+	dev_dbg(dev, "Probing for ILI210X I2C Touschreen driver");
+
+	if (!pdata) {
+		dev_err(dev, "No platform data!\n");
+		return -EINVAL;
+	}
+
+	if (client->irq <= 0) {
+		dev_err(dev, "No IRQ!\n");
+		return -EINVAL;
+	}
+
+	/* Get firmware version */
+	error = ili210x_read_reg(client, REG_FIRMWARE_VERSION,
+				 &firmware, sizeof(firmware));
+	if (error) {
+		dev_err(dev, "Failed to get firmware version, err: %d\n",
+			error);
+		return error;
+	}
+
+	/* get panel info */
+	error = ili210x_read_reg(client, REG_PANEL_INFO, &panel, sizeof(panel));
+	if (error) {
+		dev_err(dev, "Failed to get panel information, err: %d\n",
+			error);
+		return error;
+	}
+
+	xmax = panel.finger_max.x_low | (panel.finger_max.x_high << 8);
+	ymax = panel.finger_max.y_low | (panel.finger_max.y_high << 8);
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!priv || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	priv->client = client;
+	priv->input = input;
+	priv->get_pendown_state = pdata->get_pendown_state;
+	priv->poll_period = pdata->poll_period ? : DEFAULT_POLL_PERIOD;
+	INIT_DELAYED_WORK(&priv->dwork, ili210x_work);
+
+	/* Setup input device */
+	input->name = "ILI210x Touchscreen";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = dev;
+
+	__set_bit(EV_SYN, input->evbit);
+	__set_bit(EV_KEY, input->evbit);
+	__set_bit(EV_ABS, input->evbit);
+	__set_bit(BTN_TOUCH, input->keybit);
+
+	/* Single touch */
+	input_set_abs_params(input, ABS_X, 0, xmax, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, ymax, 0, 0);
+
+	/* Multi touch */
+	input_mt_init_slots(input, MAX_TOUCHES, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0, xmax, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0, ymax, 0, 0);
+
+	input_set_drvdata(input, priv);
+	i2c_set_clientdata(client, priv);
+
+	error = request_irq(client->irq, ili210x_irq, pdata->irq_flags,
+			    client->name, priv);
+	if (error) {
+		dev_err(dev, "Unable to request touchscreen IRQ, err: %d\n",
+			error);
+		goto err_free_mem;
+	}
+
+	error = sysfs_create_group(&dev->kobj, &ili210x_attr_group);
+	if (error) {
+		dev_err(dev, "Unable to create sysfs attributes, err: %d\n",
+			error);
+		goto err_free_irq;
+	}
+
+	error = input_register_device(priv->input);
+	if (error) {
+		dev_err(dev, "Cannot register input device, err: %d\n", error);
+		goto err_remove_sysfs;
+	}
+
+	device_init_wakeup(&client->dev, 1);
+
+	dev_dbg(dev,
+		"ILI210x initialized (IRQ: %d), firmware version %d.%d.%d",
+		client->irq, firmware.id, firmware.major, firmware.minor);
+
+	return 0;
+
+err_remove_sysfs:
+	sysfs_remove_group(&dev->kobj, &ili210x_attr_group);
+err_free_irq:
+	free_irq(client->irq, priv);
+err_free_mem:
+	input_free_device(input);
+	kfree(priv);
+	return error;
+}
+
+static int ili210x_i2c_remove(struct i2c_client *client)
+{
+	struct ili210x *priv = i2c_get_clientdata(client);
+
+	sysfs_remove_group(&client->dev.kobj, &ili210x_attr_group);
+	free_irq(priv->client->irq, priv);
+	cancel_delayed_work_sync(&priv->dwork);
+	input_unregister_device(priv->input);
+	kfree(priv);
+
+	return 0;
+}
+
+static int __maybe_unused ili210x_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static int __maybe_unused ili210x_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ili210x_i2c_pm,
+			 ili210x_i2c_suspend, ili210x_i2c_resume);
+
+static const struct i2c_device_id ili210x_i2c_id[] = {
+	{ "ili210x", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ili210x_i2c_id);
+
+static struct i2c_driver ili210x_ts_driver = {
+	.driver = {
+		.name = "ili210x_i2c",
+		.pm = &ili210x_i2c_pm,
+	},
+	.id_table = ili210x_i2c_id,
+	.probe = ili210x_i2c_probe,
+	.remove = ili210x_i2c_remove,
+};
+
+module_i2c_driver(ili210x_ts_driver);
+
+MODULE_AUTHOR("Olivier Sobrie <olivier@sobrie.be>");
+MODULE_DESCRIPTION("ILI210X I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/imx6ul_tsc.c b/drivers/input/touchscreen/imx6ul_tsc.c
new file mode 100644
index 0000000..8275267
--- /dev/null
+++ b/drivers/input/touchscreen/imx6ul_tsc.c
@@ -0,0 +1,533 @@
+/*
+ * Freescale i.MX6UL touchscreen controller driver
+ *
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio/consumer.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+/* ADC configuration registers field define */
+#define ADC_AIEN		(0x1 << 7)
+#define ADC_CONV_DISABLE	0x1F
+#define ADC_CAL			(0x1 << 7)
+#define ADC_CALF		0x2
+#define ADC_12BIT_MODE		(0x2 << 2)
+#define ADC_IPG_CLK		0x00
+#define ADC_CLK_DIV_8		(0x03 << 5)
+#define ADC_SHORT_SAMPLE_MODE	(0x0 << 4)
+#define ADC_HARDWARE_TRIGGER	(0x1 << 13)
+#define SELECT_CHANNEL_4	0x04
+#define SELECT_CHANNEL_1	0x01
+#define DISABLE_CONVERSION_INT	(0x0 << 7)
+
+/* ADC registers */
+#define REG_ADC_HC0		0x00
+#define REG_ADC_HC1		0x04
+#define REG_ADC_HC2		0x08
+#define REG_ADC_HC3		0x0C
+#define REG_ADC_HC4		0x10
+#define REG_ADC_HS		0x14
+#define REG_ADC_R0		0x18
+#define REG_ADC_CFG		0x2C
+#define REG_ADC_GC		0x30
+#define REG_ADC_GS		0x34
+
+#define ADC_TIMEOUT		msecs_to_jiffies(100)
+
+/* TSC registers */
+#define REG_TSC_BASIC_SETING	0x00
+#define REG_TSC_PRE_CHARGE_TIME	0x10
+#define REG_TSC_FLOW_CONTROL	0x20
+#define REG_TSC_MEASURE_VALUE	0x30
+#define REG_TSC_INT_EN		0x40
+#define REG_TSC_INT_SIG_EN	0x50
+#define REG_TSC_INT_STATUS	0x60
+#define REG_TSC_DEBUG_MODE	0x70
+#define REG_TSC_DEBUG_MODE2	0x80
+
+/* TSC configuration registers field define */
+#define DETECT_4_WIRE_MODE	(0x0 << 4)
+#define AUTO_MEASURE		0x1
+#define MEASURE_SIGNAL		0x1
+#define DETECT_SIGNAL		(0x1 << 4)
+#define VALID_SIGNAL		(0x1 << 8)
+#define MEASURE_INT_EN		0x1
+#define MEASURE_SIG_EN		0x1
+#define VALID_SIG_EN		(0x1 << 8)
+#define DE_GLITCH_2		(0x2 << 29)
+#define START_SENSE		(0x1 << 12)
+#define TSC_DISABLE		(0x1 << 16)
+#define DETECT_MODE		0x2
+
+struct imx6ul_tsc {
+	struct device *dev;
+	struct input_dev *input;
+	void __iomem *tsc_regs;
+	void __iomem *adc_regs;
+	struct clk *tsc_clk;
+	struct clk *adc_clk;
+	struct gpio_desc *xnur_gpio;
+
+	int measure_delay_time;
+	int pre_charge_time;
+
+	struct completion completion;
+};
+
+/*
+ * TSC module need ADC to get the measure value. So
+ * before config TSC, we should initialize ADC module.
+ */
+static int imx6ul_adc_init(struct imx6ul_tsc *tsc)
+{
+	int adc_hc = 0;
+	int adc_gc;
+	int adc_gs;
+	int adc_cfg;
+	int timeout;
+
+	reinit_completion(&tsc->completion);
+
+	adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG);
+	adc_cfg |= ADC_12BIT_MODE | ADC_IPG_CLK;
+	adc_cfg |= ADC_CLK_DIV_8 | ADC_SHORT_SAMPLE_MODE;
+	adc_cfg &= ~ADC_HARDWARE_TRIGGER;
+	writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG);
+
+	/* enable calibration interrupt */
+	adc_hc |= ADC_AIEN;
+	adc_hc |= ADC_CONV_DISABLE;
+	writel(adc_hc, tsc->adc_regs + REG_ADC_HC0);
+
+	/* start ADC calibration */
+	adc_gc = readl(tsc->adc_regs + REG_ADC_GC);
+	adc_gc |= ADC_CAL;
+	writel(adc_gc, tsc->adc_regs + REG_ADC_GC);
+
+	timeout = wait_for_completion_timeout
+			(&tsc->completion, ADC_TIMEOUT);
+	if (timeout == 0) {
+		dev_err(tsc->dev, "Timeout for adc calibration\n");
+		return -ETIMEDOUT;
+	}
+
+	adc_gs = readl(tsc->adc_regs + REG_ADC_GS);
+	if (adc_gs & ADC_CALF) {
+		dev_err(tsc->dev, "ADC calibration failed\n");
+		return -EINVAL;
+	}
+
+	/* TSC need the ADC work in hardware trigger */
+	adc_cfg = readl(tsc->adc_regs + REG_ADC_CFG);
+	adc_cfg |= ADC_HARDWARE_TRIGGER;
+	writel(adc_cfg, tsc->adc_regs + REG_ADC_CFG);
+
+	return 0;
+}
+
+/*
+ * This is a TSC workaround. Currently TSC misconnect two
+ * ADC channels, this function remap channel configure for
+ * hardware trigger.
+ */
+static void imx6ul_tsc_channel_config(struct imx6ul_tsc *tsc)
+{
+	int adc_hc0, adc_hc1, adc_hc2, adc_hc3, adc_hc4;
+
+	adc_hc0 = DISABLE_CONVERSION_INT;
+	writel(adc_hc0, tsc->adc_regs + REG_ADC_HC0);
+
+	adc_hc1 = DISABLE_CONVERSION_INT | SELECT_CHANNEL_4;
+	writel(adc_hc1, tsc->adc_regs + REG_ADC_HC1);
+
+	adc_hc2 = DISABLE_CONVERSION_INT;
+	writel(adc_hc2, tsc->adc_regs + REG_ADC_HC2);
+
+	adc_hc3 = DISABLE_CONVERSION_INT | SELECT_CHANNEL_1;
+	writel(adc_hc3, tsc->adc_regs + REG_ADC_HC3);
+
+	adc_hc4 = DISABLE_CONVERSION_INT;
+	writel(adc_hc4, tsc->adc_regs + REG_ADC_HC4);
+}
+
+/*
+ * TSC setting, confige the pre-charge time and measure delay time.
+ * different touch screen may need different pre-charge time and
+ * measure delay time.
+ */
+static void imx6ul_tsc_set(struct imx6ul_tsc *tsc)
+{
+	int basic_setting = 0;
+	int start;
+
+	basic_setting |= tsc->measure_delay_time << 8;
+	basic_setting |= DETECT_4_WIRE_MODE | AUTO_MEASURE;
+	writel(basic_setting, tsc->tsc_regs + REG_TSC_BASIC_SETING);
+
+	writel(DE_GLITCH_2, tsc->tsc_regs + REG_TSC_DEBUG_MODE2);
+
+	writel(tsc->pre_charge_time, tsc->tsc_regs + REG_TSC_PRE_CHARGE_TIME);
+	writel(MEASURE_INT_EN, tsc->tsc_regs + REG_TSC_INT_EN);
+	writel(MEASURE_SIG_EN | VALID_SIG_EN,
+		tsc->tsc_regs + REG_TSC_INT_SIG_EN);
+
+	/* start sense detection */
+	start = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
+	start |= START_SENSE;
+	start &= ~TSC_DISABLE;
+	writel(start, tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
+}
+
+static int imx6ul_tsc_init(struct imx6ul_tsc *tsc)
+{
+	int err;
+
+	err = imx6ul_adc_init(tsc);
+	if (err)
+		return err;
+	imx6ul_tsc_channel_config(tsc);
+	imx6ul_tsc_set(tsc);
+
+	return 0;
+}
+
+static void imx6ul_tsc_disable(struct imx6ul_tsc *tsc)
+{
+	int tsc_flow;
+	int adc_cfg;
+
+	/* TSC controller enters to idle status */
+	tsc_flow = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
+	tsc_flow |= TSC_DISABLE;
+	writel(tsc_flow, tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
+
+	/* ADC controller enters to stop mode */
+	adc_cfg = readl(tsc->adc_regs + REG_ADC_HC0);
+	adc_cfg |= ADC_CONV_DISABLE;
+	writel(adc_cfg, tsc->adc_regs + REG_ADC_HC0);
+}
+
+/* Delay some time (max 2ms), wait the pre-charge done. */
+static bool tsc_wait_detect_mode(struct imx6ul_tsc *tsc)
+{
+	unsigned long timeout = jiffies + msecs_to_jiffies(2);
+	int state_machine;
+	int debug_mode2;
+
+	do {
+		if (time_after(jiffies, timeout))
+			return false;
+
+		usleep_range(200, 400);
+		debug_mode2 = readl(tsc->tsc_regs + REG_TSC_DEBUG_MODE2);
+		state_machine = (debug_mode2 >> 20) & 0x7;
+	} while (state_machine != DETECT_MODE);
+
+	usleep_range(200, 400);
+	return true;
+}
+
+static irqreturn_t tsc_irq_fn(int irq, void *dev_id)
+{
+	struct imx6ul_tsc *tsc = dev_id;
+	int status;
+	int value;
+	int x, y;
+	int start;
+
+	status = readl(tsc->tsc_regs + REG_TSC_INT_STATUS);
+
+	/* write 1 to clear the bit measure-signal */
+	writel(MEASURE_SIGNAL | DETECT_SIGNAL,
+		tsc->tsc_regs + REG_TSC_INT_STATUS);
+
+	/* It's a HW self-clean bit. Set this bit and start sense detection */
+	start = readl(tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
+	start |= START_SENSE;
+	writel(start, tsc->tsc_regs + REG_TSC_FLOW_CONTROL);
+
+	if (status & MEASURE_SIGNAL) {
+		value = readl(tsc->tsc_regs + REG_TSC_MEASURE_VALUE);
+		x = (value >> 16) & 0x0fff;
+		y = value & 0x0fff;
+
+		/*
+		 * In detect mode, we can get the xnur gpio value,
+		 * otherwise assume contact is stiull active.
+		 */
+		if (!tsc_wait_detect_mode(tsc) ||
+		    gpiod_get_value_cansleep(tsc->xnur_gpio)) {
+			input_report_key(tsc->input, BTN_TOUCH, 1);
+			input_report_abs(tsc->input, ABS_X, x);
+			input_report_abs(tsc->input, ABS_Y, y);
+		} else {
+			input_report_key(tsc->input, BTN_TOUCH, 0);
+		}
+
+		input_sync(tsc->input);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t adc_irq_fn(int irq, void *dev_id)
+{
+	struct imx6ul_tsc *tsc = dev_id;
+	int coco;
+	int value;
+
+	coco = readl(tsc->adc_regs + REG_ADC_HS);
+	if (coco & 0x01) {
+		value = readl(tsc->adc_regs + REG_ADC_R0);
+		complete(&tsc->completion);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int imx6ul_tsc_open(struct input_dev *input_dev)
+{
+	struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
+	int err;
+
+	err = clk_prepare_enable(tsc->adc_clk);
+	if (err) {
+		dev_err(tsc->dev,
+			"Could not prepare or enable the adc clock: %d\n",
+			err);
+		return err;
+	}
+
+	err = clk_prepare_enable(tsc->tsc_clk);
+	if (err) {
+		dev_err(tsc->dev,
+			"Could not prepare or enable the tsc clock: %d\n",
+			err);
+		clk_disable_unprepare(tsc->adc_clk);
+		return err;
+	}
+
+	return imx6ul_tsc_init(tsc);
+}
+
+static void imx6ul_tsc_close(struct input_dev *input_dev)
+{
+	struct imx6ul_tsc *tsc = input_get_drvdata(input_dev);
+
+	imx6ul_tsc_disable(tsc);
+
+	clk_disable_unprepare(tsc->tsc_clk);
+	clk_disable_unprepare(tsc->adc_clk);
+}
+
+static int imx6ul_tsc_probe(struct platform_device *pdev)
+{
+	struct device_node *np = pdev->dev.of_node;
+	struct imx6ul_tsc *tsc;
+	struct input_dev *input_dev;
+	struct resource *tsc_mem;
+	struct resource *adc_mem;
+	int err;
+	int tsc_irq;
+	int adc_irq;
+
+	tsc = devm_kzalloc(&pdev->dev, sizeof(*tsc), GFP_KERNEL);
+	if (!tsc)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
+
+	input_dev->name = "iMX6UL Touchscreen Controller";
+	input_dev->id.bustype = BUS_HOST;
+
+	input_dev->open = imx6ul_tsc_open;
+	input_dev->close = imx6ul_tsc_close;
+
+	input_set_capability(input_dev, EV_KEY, BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, 0, 0xFFF, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 0xFFF, 0, 0);
+
+	input_set_drvdata(input_dev, tsc);
+
+	tsc->dev = &pdev->dev;
+	tsc->input = input_dev;
+	init_completion(&tsc->completion);
+
+	tsc->xnur_gpio = devm_gpiod_get(&pdev->dev, "xnur", GPIOD_IN);
+	if (IS_ERR(tsc->xnur_gpio)) {
+		err = PTR_ERR(tsc->xnur_gpio);
+		dev_err(&pdev->dev,
+			"failed to request GPIO tsc_X- (xnur): %d\n", err);
+		return err;
+	}
+
+	tsc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	tsc->tsc_regs = devm_ioremap_resource(&pdev->dev, tsc_mem);
+	if (IS_ERR(tsc->tsc_regs)) {
+		err = PTR_ERR(tsc->tsc_regs);
+		dev_err(&pdev->dev, "failed to remap tsc memory: %d\n", err);
+		return err;
+	}
+
+	adc_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	tsc->adc_regs = devm_ioremap_resource(&pdev->dev, adc_mem);
+	if (IS_ERR(tsc->adc_regs)) {
+		err = PTR_ERR(tsc->adc_regs);
+		dev_err(&pdev->dev, "failed to remap adc memory: %d\n", err);
+		return err;
+	}
+
+	tsc->tsc_clk = devm_clk_get(&pdev->dev, "tsc");
+	if (IS_ERR(tsc->tsc_clk)) {
+		err = PTR_ERR(tsc->tsc_clk);
+		dev_err(&pdev->dev, "failed getting tsc clock: %d\n", err);
+		return err;
+	}
+
+	tsc->adc_clk = devm_clk_get(&pdev->dev, "adc");
+	if (IS_ERR(tsc->adc_clk)) {
+		err = PTR_ERR(tsc->adc_clk);
+		dev_err(&pdev->dev, "failed getting adc clock: %d\n", err);
+		return err;
+	}
+
+	tsc_irq = platform_get_irq(pdev, 0);
+	if (tsc_irq < 0) {
+		dev_err(&pdev->dev, "no tsc irq resource?\n");
+		return tsc_irq;
+	}
+
+	adc_irq = platform_get_irq(pdev, 1);
+	if (adc_irq < 0) {
+		dev_err(&pdev->dev, "no adc irq resource?\n");
+		return adc_irq;
+	}
+
+	err = devm_request_threaded_irq(tsc->dev, tsc_irq,
+					NULL, tsc_irq_fn, IRQF_ONESHOT,
+					dev_name(&pdev->dev), tsc);
+	if (err) {
+		dev_err(&pdev->dev,
+			"failed requesting tsc irq %d: %d\n",
+			tsc_irq, err);
+		return err;
+	}
+
+	err = devm_request_irq(tsc->dev, adc_irq, adc_irq_fn, 0,
+				dev_name(&pdev->dev), tsc);
+	if (err) {
+		dev_err(&pdev->dev,
+			"failed requesting adc irq %d: %d\n",
+			adc_irq, err);
+		return err;
+	}
+
+	err = of_property_read_u32(np, "measure-delay-time",
+				   &tsc->measure_delay_time);
+	if (err)
+		tsc->measure_delay_time = 0xffff;
+
+	err = of_property_read_u32(np, "pre-charge-time",
+				   &tsc->pre_charge_time);
+	if (err)
+		tsc->pre_charge_time = 0xfff;
+
+	err = input_register_device(tsc->input);
+	if (err) {
+		dev_err(&pdev->dev,
+			"failed to register input device: %d\n", err);
+		return err;
+	}
+
+	platform_set_drvdata(pdev, tsc);
+	return 0;
+}
+
+static int __maybe_unused imx6ul_tsc_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct imx6ul_tsc *tsc = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = tsc->input;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users) {
+		imx6ul_tsc_disable(tsc);
+
+		clk_disable_unprepare(tsc->tsc_clk);
+		clk_disable_unprepare(tsc->adc_clk);
+	}
+
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused imx6ul_tsc_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct imx6ul_tsc *tsc = platform_get_drvdata(pdev);
+	struct input_dev *input_dev = tsc->input;
+	int retval = 0;
+
+	mutex_lock(&input_dev->mutex);
+
+	if (input_dev->users) {
+		retval = clk_prepare_enable(tsc->adc_clk);
+		if (retval)
+			goto out;
+
+		retval = clk_prepare_enable(tsc->tsc_clk);
+		if (retval) {
+			clk_disable_unprepare(tsc->adc_clk);
+			goto out;
+		}
+
+		retval = imx6ul_tsc_init(tsc);
+	}
+
+out:
+	mutex_unlock(&input_dev->mutex);
+	return retval;
+}
+
+static SIMPLE_DEV_PM_OPS(imx6ul_tsc_pm_ops,
+			 imx6ul_tsc_suspend, imx6ul_tsc_resume);
+
+static const struct of_device_id imx6ul_tsc_match[] = {
+	{ .compatible = "fsl,imx6ul-tsc", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx6ul_tsc_match);
+
+static struct platform_driver imx6ul_tsc_driver = {
+	.driver		= {
+		.name	= "imx6ul-tsc",
+		.of_match_table	= imx6ul_tsc_match,
+		.pm	= &imx6ul_tsc_pm_ops,
+	},
+	.probe		= imx6ul_tsc_probe,
+};
+module_platform_driver(imx6ul_tsc_driver);
+
+MODULE_AUTHOR("Haibo Chen <haibo.chen@freescale.com>");
+MODULE_DESCRIPTION("Freescale i.MX6UL Touchscreen controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/inexio.c b/drivers/input/touchscreen/inexio.c
new file mode 100644
index 0000000..adb80b6
--- /dev/null
+++ b/drivers/input/touchscreen/inexio.c
@@ -0,0 +1,191 @@
+/*
+ * iNexio serial touchscreen driver
+ *
+ * Copyright (c) 2008 Richard Lemon
+ * Based on the mtouch driver (c) Vojtech Pavlik and Dan Streetman
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2008/06/19 Richard Lemon <richard@codelemon.com>
+ *   Copied mtouch.c and edited for iNexio protocol
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"iNexio serial touchscreen driver"
+
+MODULE_AUTHOR("Richard Lemon <richard@codelemon.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define INEXIO_FORMAT_TOUCH_BIT 0x01
+#define INEXIO_FORMAT_LENGTH 5
+#define INEXIO_RESPONSE_BEGIN_BYTE 0x80
+
+/* todo: check specs for max length of all responses */
+#define INEXIO_MAX_LENGTH 16
+
+#define INEXIO_MIN_XC 0
+#define INEXIO_MAX_XC 0x3fff
+#define INEXIO_MIN_YC 0
+#define INEXIO_MAX_YC 0x3fff
+
+#define INEXIO_GET_XC(data) (((data[1])<<7) | data[2])
+#define INEXIO_GET_YC(data) (((data[3])<<7) | data[4])
+#define INEXIO_GET_TOUCHED(data) (INEXIO_FORMAT_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct inexio {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[INEXIO_MAX_LENGTH];
+	char phys[32];
+};
+
+static void inexio_process_data(struct inexio *pinexio)
+{
+	struct input_dev *dev = pinexio->dev;
+
+	if (INEXIO_FORMAT_LENGTH == ++pinexio->idx) {
+		input_report_abs(dev, ABS_X, INEXIO_GET_XC(pinexio->data));
+		input_report_abs(dev, ABS_Y, INEXIO_GET_YC(pinexio->data));
+		input_report_key(dev, BTN_TOUCH, INEXIO_GET_TOUCHED(pinexio->data));
+		input_sync(dev);
+
+		pinexio->idx = 0;
+	}
+}
+
+static irqreturn_t inexio_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct inexio* pinexio = serio_get_drvdata(serio);
+
+	pinexio->data[pinexio->idx] = data;
+
+	if (INEXIO_RESPONSE_BEGIN_BYTE&pinexio->data[0])
+		inexio_process_data(pinexio);
+	else
+		printk(KERN_DEBUG "inexio.c: unknown/unsynchronized data from device, byte %x\n",pinexio->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * inexio_disconnect() is the opposite of inexio_connect()
+ */
+
+static void inexio_disconnect(struct serio *serio)
+{
+	struct inexio* pinexio = serio_get_drvdata(serio);
+
+	input_get_device(pinexio->dev);
+	input_unregister_device(pinexio->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(pinexio->dev);
+	kfree(pinexio);
+}
+
+/*
+ * inexio_connect() is the routine that is called when someone adds a
+ * new serio device that supports iNexio protocol and registers it as
+ * an input device. This is usually accomplished using inputattach.
+ */
+
+static int inexio_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct inexio *pinexio;
+	struct input_dev *input_dev;
+	int err;
+
+	pinexio = kzalloc(sizeof(struct inexio), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!pinexio || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	pinexio->serio = serio;
+	pinexio->dev = input_dev;
+	snprintf(pinexio->phys, sizeof(pinexio->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "iNexio Serial TouchScreen";
+	input_dev->phys = pinexio->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_INEXIO;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(pinexio->dev, ABS_X, INEXIO_MIN_XC, INEXIO_MAX_XC, 0, 0);
+	input_set_abs_params(pinexio->dev, ABS_Y, INEXIO_MIN_YC, INEXIO_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, pinexio);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(pinexio->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(pinexio);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id inexio_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_INEXIO,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, inexio_serio_ids);
+
+static struct serio_driver inexio_drv = {
+	.driver		= {
+		.name	= "inexio",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= inexio_serio_ids,
+	.interrupt	= inexio_interrupt,
+	.connect	= inexio_connect,
+	.disconnect	= inexio_disconnect,
+};
+
+module_serio_driver(inexio_drv);
diff --git a/drivers/input/touchscreen/intel-mid-touch.c b/drivers/input/touchscreen/intel-mid-touch.c
new file mode 100644
index 0000000..b4f0725
--- /dev/null
+++ b/drivers/input/touchscreen/intel-mid-touch.c
@@ -0,0 +1,654 @@
+/*
+ * Intel MID Resistive Touch Screen Driver
+ *
+ * Copyright (C) 2008 Intel Corp
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * Questions/Comments/Bug fixes to Sreedhara (sreedhara.ds@intel.com)
+ *			    Ramesh Agarwal (ramesh.agarwal@intel.com)
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * TODO:
+ *	review conversion of r/m/w sequences
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/param.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <asm/intel_scu_ipc.h>
+#include <linux/device.h>
+
+/* PMIC Interrupt registers */
+#define PMIC_REG_ID1		0x00 /* PMIC ID1 register */
+
+/* PMIC Interrupt registers */
+#define PMIC_REG_INT		0x04 /* PMIC interrupt register */
+#define PMIC_REG_MINT		0x05 /* PMIC interrupt mask register */
+
+/* ADC Interrupt registers */
+#define PMIC_REG_ADCINT		0x5F /* ADC interrupt register */
+#define PMIC_REG_MADCINT	0x60 /* ADC interrupt mask register */
+
+/* ADC Control registers */
+#define PMIC_REG_ADCCNTL1	0x61 /* ADC control register */
+
+/* ADC Channel Selection registers */
+#define PMICADDR0		0xA4
+#define END_OF_CHANNEL		0x1F
+
+/* ADC Result register */
+#define PMIC_REG_ADCSNS0H	0x64
+
+/* ADC channels for touch screen */
+#define MRST_TS_CHAN10		0xA /* Touch screen X+ connection */
+#define MRST_TS_CHAN11		0xB /* Touch screen X- connection */
+#define MRST_TS_CHAN12		0xC /* Touch screen Y+ connection */
+#define MRST_TS_CHAN13		0xD /* Touch screen Y- connection */
+
+/* Touch screen channel BIAS constants */
+#define MRST_XBIAS		0x20
+#define MRST_YBIAS		0x40
+#define MRST_ZBIAS		0x80
+
+/* Touch screen coordinates */
+#define MRST_X_MIN		10
+#define MRST_X_MAX		1024
+#define MRST_X_FUZZ		5
+#define MRST_Y_MIN		10
+#define MRST_Y_MAX		1024
+#define MRST_Y_FUZZ		5
+#define MRST_PRESSURE_MIN	0
+#define MRST_PRESSURE_NOMINAL	50
+#define MRST_PRESSURE_MAX	100
+
+#define WAIT_ADC_COMPLETION	10 /* msec */
+
+/* PMIC ADC round robin delays */
+#define ADC_LOOP_DELAY0		0x0 /* Continuous loop */
+#define ADC_LOOP_DELAY1		0x1 /* 4.5  ms approximate */
+
+/* PMIC Vendor Identifiers */
+#define PMIC_VENDOR_FS		0 /* PMIC vendor FreeScale */
+#define PMIC_VENDOR_MAXIM	1 /* PMIC vendor MAXIM */
+#define PMIC_VENDOR_NEC		2 /* PMIC vendor NEC */
+#define MRSTOUCH_MAX_CHANNELS	32 /* Maximum ADC channels */
+
+/* Touch screen device structure */
+struct mrstouch_dev {
+	struct device *dev; /* device associated with touch screen */
+	struct input_dev *input;
+	char phys[32];
+	u16 asr;		/* Address selection register */
+	int irq;
+	unsigned int vendor;	/* PMIC vendor */
+	unsigned int rev;	/* PMIC revision */
+
+	int (*read_prepare)(struct mrstouch_dev *tsdev);
+	int (*read)(struct mrstouch_dev *tsdev, u16 *x, u16 *y, u16 *z);
+	int (*read_finish)(struct mrstouch_dev *tsdev);
+};
+
+
+/*************************** NEC and Maxim Interface ************************/
+
+static int mrstouch_nec_adc_read_prepare(struct mrstouch_dev *tsdev)
+{
+	return intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0, 0x20);
+}
+
+/*
+ * Enables PENDET interrupt.
+ */
+static int mrstouch_nec_adc_read_finish(struct mrstouch_dev *tsdev)
+{
+	int err;
+
+	err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x20, 0x20);
+	if (!err)
+		err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, 0, 0x05);
+
+	return err;
+}
+
+/*
+ * Reads PMIC ADC touch screen result
+ * Reads ADC storage registers for higher 7 and lower 3 bits and
+ * converts the two readings into a single value and turns off gain bit
+ */
+static int mrstouch_ts_chan_read(u16 offset, u16 chan, u16 *vp, u16 *vm)
+{
+	int err;
+	u16 result;
+	u32 res;
+
+	result = PMIC_REG_ADCSNS0H + offset;
+
+	if (chan == MRST_TS_CHAN12)
+		result += 4;
+
+	err = intel_scu_ipc_ioread32(result, &res);
+	if (err)
+		return err;
+
+	/* Mash the bits up */
+
+	*vp = (res & 0xFF) << 3;	/* Highest 7 bits */
+	*vp |= (res >> 8) & 0x07;	/* Lower 3 bits */
+	*vp &= 0x3FF;
+
+	res >>= 16;
+
+	*vm = (res & 0xFF) << 3;	/* Highest 7 bits */
+	*vm |= (res >> 8) & 0x07;	/* Lower 3 bits */
+	*vm &= 0x3FF;
+
+	return 0;
+}
+
+/*
+ * Enables X, Y and Z bias values
+ * Enables YPYM for X channels and XPXM for Y channels
+ */
+static int mrstouch_ts_bias_set(uint offset, uint bias)
+{
+	int count;
+	u16 chan, start;
+	u16 reg[4];
+	u8 data[4];
+
+	chan = PMICADDR0 + offset;
+	start = MRST_TS_CHAN10;
+
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = bias | (start + count);
+	}
+
+	return intel_scu_ipc_writev(reg, data, 4);
+}
+
+/* To read touch screen channel values */
+static int mrstouch_nec_adc_read(struct mrstouch_dev *tsdev,
+				 u16 *x, u16 *y, u16 *z)
+{
+	int err;
+	u16 xm, ym, zm;
+
+	/* configure Y bias for X channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, MRST_YBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read x+ and x- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, x, &xm);
+	if (err)
+		goto ipc_error;
+
+	/* configure x bias for y channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, MRST_XBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read y+ and y- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN12, y, &ym);
+	if (err)
+		goto ipc_error;
+
+	/* configure z bias for x and y channels */
+	err = mrstouch_ts_bias_set(tsdev->asr, MRST_ZBIAS);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* read z+ and z- channels */
+	err = mrstouch_ts_chan_read(tsdev->asr, MRST_TS_CHAN10, z, &zm);
+	if (err)
+		goto ipc_error;
+
+	return 0;
+
+ipc_error:
+	dev_err(tsdev->dev, "ipc error during adc read\n");
+	return err;
+}
+
+
+/*************************** Freescale Interface ************************/
+
+static int mrstouch_fs_adc_read_prepare(struct mrstouch_dev *tsdev)
+{
+	int err, count;
+	u16 chan;
+	u16 reg[5];
+	u8 data[5];
+
+	/* Stop the ADC */
+	err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x00, 0x02);
+	if (err)
+		goto ipc_error;
+
+	chan = PMICADDR0 + tsdev->asr;
+
+	/* Set X BIAS */
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = 0x2A;
+	}
+	reg[count] =  chan++; /* Dummy */
+	data[count] = 0;
+
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* Set Y BIAS */
+	for (count = 0; count <= 3; count++) {
+		reg[count] = chan++;
+		data[count] = 0x4A;
+	}
+	reg[count] = chan++; /* Dummy */
+	data[count] = 0;
+
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	/* Set Z BIAS */
+	err = intel_scu_ipc_iowrite32(chan + 2, 0x8A8A8A8A);
+	if (err)
+		goto ipc_error;
+
+	msleep(WAIT_ADC_COMPLETION);
+
+	return 0;
+
+ipc_error:
+	dev_err(tsdev->dev, "ipc error during %s\n", __func__);
+	return err;
+}
+
+static int mrstouch_fs_adc_read(struct mrstouch_dev *tsdev,
+				u16 *x, u16 *y, u16 *z)
+{
+	int err;
+	u16 result;
+	u16 reg[4];
+	u8 data[4];
+
+	result = PMIC_REG_ADCSNS0H + tsdev->asr;
+
+	reg[0] = result + 4;
+	reg[1] = result + 5;
+	reg[2] = result + 16;
+	reg[3] = result + 17;
+
+	err = intel_scu_ipc_readv(reg, data, 4);
+	if (err)
+		goto ipc_error;
+
+	*x = data[0] << 3; /* Higher 7 bits */
+	*x |= data[1] & 0x7; /* Lower 3 bits */
+	*x &= 0x3FF;
+
+	*y = data[2] << 3; /* Higher 7 bits */
+	*y |= data[3] & 0x7; /* Lower 3 bits */
+	*y &= 0x3FF;
+
+	/* Read Z value */
+	reg[0] = result + 28;
+	reg[1] = result + 29;
+
+	err = intel_scu_ipc_readv(reg, data, 4);
+	if (err)
+		goto ipc_error;
+
+	*z = data[0] << 3; /* Higher 7 bits */
+	*z |= data[1] & 0x7; /* Lower 3 bits */
+	*z &= 0x3FF;
+
+	return 0;
+
+ipc_error:
+	dev_err(tsdev->dev, "ipc error during %s\n", __func__);
+	return err;
+}
+
+static int mrstouch_fs_adc_read_finish(struct mrstouch_dev *tsdev)
+{
+	int err, count;
+	u16 chan;
+	u16 reg[5];
+	u8 data[5];
+
+	/* Clear all TS channels */
+	chan = PMICADDR0 + tsdev->asr;
+	for (count = 0; count <= 4; count++) {
+		reg[count] = chan++;
+		data[count] = 0;
+	}
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	for (count = 0; count <= 4; count++) {
+		reg[count] = chan++;
+		data[count] = 0;
+	}
+	err = intel_scu_ipc_writev(reg, data, 5);
+	if (err)
+		goto ipc_error;
+
+	err = intel_scu_ipc_iowrite32(chan + 2, 0x00000000);
+	if (err)
+		goto ipc_error;
+
+	/* Start ADC */
+	err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, 0x02, 0x02);
+	if (err)
+		goto ipc_error;
+
+	return 0;
+
+ipc_error:
+	dev_err(tsdev->dev, "ipc error during %s\n", __func__);
+	return err;
+}
+
+static void mrstouch_report_event(struct input_dev *input,
+			unsigned int x, unsigned int y, unsigned int z)
+{
+	if (z > MRST_PRESSURE_NOMINAL) {
+		/* Pen touched, report button touch and coordinates */
+		input_report_key(input, BTN_TOUCH, 1);
+		input_report_abs(input, ABS_X, x);
+		input_report_abs(input, ABS_Y, y);
+	} else {
+		input_report_key(input, BTN_TOUCH, 0);
+	}
+
+	input_report_abs(input, ABS_PRESSURE, z);
+	input_sync(input);
+}
+
+/* PENDET interrupt handler */
+static irqreturn_t mrstouch_pendet_irq(int irq, void *dev_id)
+{
+	struct mrstouch_dev *tsdev = dev_id;
+	u16 x, y, z;
+
+	/*
+	 * Should we lower thread priority? Probably not, since we are
+	 * not spinning but sleeping...
+	 */
+
+	if (tsdev->read_prepare(tsdev))
+		goto out;
+
+	do {
+		if (tsdev->read(tsdev, &x, &y, &z))
+			break;
+
+		mrstouch_report_event(tsdev->input, x, y, z);
+	} while (z > MRST_PRESSURE_NOMINAL);
+
+	tsdev->read_finish(tsdev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+/* Utility to read PMIC ID */
+static int mrstouch_read_pmic_id(uint *vendor, uint *rev)
+{
+	int err;
+	u8 r;
+
+	err = intel_scu_ipc_ioread8(PMIC_REG_ID1, &r);
+	if (err)
+		return err;
+
+	*vendor = r & 0x7;
+	*rev = (r >> 3) & 0x7;
+
+	return 0;
+}
+
+/*
+ * Parse ADC channels to find end of the channel configured by other ADC user
+ * NEC and MAXIM requires 4 channels and FreeScale needs 18 channels
+ */
+static int mrstouch_chan_parse(struct mrstouch_dev *tsdev)
+{
+	int found = 0;
+	int err, i;
+	u8 r8;
+
+	for (i = 0; i < MRSTOUCH_MAX_CHANNELS; i++) {
+		err = intel_scu_ipc_ioread8(PMICADDR0 + i, &r8);
+		if (err)
+			return err;
+
+		if (r8 == END_OF_CHANNEL) {
+			found = i;
+			break;
+		}
+	}
+
+	if (tsdev->vendor == PMIC_VENDOR_FS) {
+		if (found > MRSTOUCH_MAX_CHANNELS - 18)
+			return -ENOSPC;
+	} else {
+		if (found > MRSTOUCH_MAX_CHANNELS - 4)
+			return -ENOSPC;
+	}
+
+	return found;
+}
+
+
+/*
+ * Writes touch screen channels to ADC address selection registers
+ */
+static int mrstouch_ts_chan_set(uint offset)
+{
+	u16 chan;
+
+	int ret, count;
+
+	chan = PMICADDR0 + offset;
+	for (count = 0; count <= 3; count++) {
+		ret = intel_scu_ipc_iowrite8(chan++, MRST_TS_CHAN10 + count);
+		if (ret)
+			return ret;
+	}
+	return intel_scu_ipc_iowrite8(chan++, END_OF_CHANNEL);
+}
+
+/* Initialize ADC */
+static int mrstouch_adc_init(struct mrstouch_dev *tsdev)
+{
+	int err, start;
+	u8 ra, rm;
+
+	err = mrstouch_read_pmic_id(&tsdev->vendor, &tsdev->rev);
+	if (err) {
+		dev_err(tsdev->dev, "Unable to read PMIC id\n");
+		return err;
+	}
+
+	switch (tsdev->vendor) {
+	case PMIC_VENDOR_NEC:
+	case PMIC_VENDOR_MAXIM:
+		tsdev->read_prepare = mrstouch_nec_adc_read_prepare;
+		tsdev->read = mrstouch_nec_adc_read;
+		tsdev->read_finish = mrstouch_nec_adc_read_finish;
+		break;
+
+	case PMIC_VENDOR_FS:
+		tsdev->read_prepare = mrstouch_fs_adc_read_prepare;
+		tsdev->read = mrstouch_fs_adc_read;
+		tsdev->read_finish = mrstouch_fs_adc_read_finish;
+		break;
+
+	default:
+		dev_err(tsdev->dev,
+			"Unsupported touchscreen: %d\n", tsdev->vendor);
+		return -ENXIO;
+	}
+
+	start = mrstouch_chan_parse(tsdev);
+	if (start < 0) {
+		dev_err(tsdev->dev, "Unable to parse channels\n");
+		return start;
+	}
+
+	tsdev->asr = start;
+
+	/*
+	 * ADC power on, start, enable PENDET and set loop delay
+	 * ADC loop delay is set to 4.5 ms approximately
+	 * Loop delay more than this results in jitter in adc readings
+	 * Setting loop delay to 0 (continuous loop) in MAXIM stops PENDET
+	 * interrupt generation sometimes.
+	 */
+
+	if (tsdev->vendor == PMIC_VENDOR_FS) {
+		ra = 0xE0 | ADC_LOOP_DELAY0;
+		rm = 0x5;
+	} else {
+		/* NEC and MAXIm not consistent with loop delay 0 */
+		ra = 0xE0 | ADC_LOOP_DELAY1;
+		rm = 0x0;
+
+		/* configure touch screen channels */
+		err = mrstouch_ts_chan_set(tsdev->asr);
+		if (err)
+			return err;
+	}
+
+	err = intel_scu_ipc_update_register(PMIC_REG_ADCCNTL1, ra, 0xE7);
+	if (err)
+		return err;
+
+	err = intel_scu_ipc_update_register(PMIC_REG_MADCINT, rm, 0x03);
+	if (err)
+		return err;
+
+	return 0;
+}
+
+
+/* Probe function for touch screen driver */
+static int mrstouch_probe(struct platform_device *pdev)
+{
+	struct mrstouch_dev *tsdev;
+	struct input_dev *input;
+	int err;
+	int irq;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "no interrupt assigned\n");
+		return -EINVAL;
+	}
+
+	tsdev = devm_kzalloc(&pdev->dev, sizeof(struct mrstouch_dev),
+			     GFP_KERNEL);
+	if (!tsdev) {
+		dev_err(&pdev->dev, "unable to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	input = devm_input_allocate_device(&pdev->dev);
+	if (!input) {
+		dev_err(&pdev->dev, "unable to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	tsdev->dev = &pdev->dev;
+	tsdev->input = input;
+	tsdev->irq = irq;
+
+	snprintf(tsdev->phys, sizeof(tsdev->phys),
+		 "%s/input0", dev_name(tsdev->dev));
+
+	err = mrstouch_adc_init(tsdev);
+	if (err) {
+		dev_err(&pdev->dev, "ADC initialization failed\n");
+		return err;
+	}
+
+	input->name = "mrst_touchscreen";
+	input->phys = tsdev->phys;
+	input->dev.parent = tsdev->dev;
+
+	input->id.vendor = tsdev->vendor;
+	input->id.version = tsdev->rev;
+
+	input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(tsdev->input, ABS_X,
+			     MRST_X_MIN, MRST_X_MAX, MRST_X_FUZZ, 0);
+	input_set_abs_params(tsdev->input, ABS_Y,
+			     MRST_Y_MIN, MRST_Y_MAX, MRST_Y_FUZZ, 0);
+	input_set_abs_params(tsdev->input, ABS_PRESSURE,
+			     MRST_PRESSURE_MIN, MRST_PRESSURE_MAX, 0, 0);
+
+	err = devm_request_threaded_irq(&pdev->dev, tsdev->irq, NULL,
+					mrstouch_pendet_irq, IRQF_ONESHOT,
+					"mrstouch", tsdev);
+	if (err) {
+		dev_err(tsdev->dev, "unable to allocate irq\n");
+		return err;
+	}
+
+	err = input_register_device(tsdev->input);
+	if (err) {
+		dev_err(tsdev->dev, "unable to register input device\n");
+		return err;
+	}
+
+	return 0;
+}
+
+static struct platform_driver mrstouch_driver = {
+	.driver = {
+		.name	= "pmic_touch",
+	},
+	.probe		= mrstouch_probe,
+};
+module_platform_driver(mrstouch_driver);
+
+MODULE_AUTHOR("Sreedhara Murthy. D.S, sreedhara.ds@intel.com");
+MODULE_DESCRIPTION("Intel Moorestown Resistive Touch Screen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/ipaq-micro-ts.c b/drivers/input/touchscreen/ipaq-micro-ts.c
new file mode 100644
index 0000000..33c1348
--- /dev/null
+++ b/drivers/input/touchscreen/ipaq-micro-ts.c
@@ -0,0 +1,164 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * h3600 atmel micro companion support, touchscreen subdevice
+ * Author : Alessandro Gardich <gremlin@gremlin.it>
+ * Author : Dmitry Artamonow <mad_soft@inbox.ru>
+ * Author : Linus Walleij <linus.walleij@linaro.org>
+ *
+ */
+
+#include <asm/byteorder.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/input.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mfd/ipaq-micro.h>
+
+struct touchscreen_data {
+	struct input_dev *input;
+	struct ipaq_micro *micro;
+};
+
+static void micro_ts_receive(void *data, int len, unsigned char *msg)
+{
+	struct touchscreen_data *ts = data;
+
+	if (len == 4) {
+		input_report_abs(ts->input, ABS_X,
+				 be16_to_cpup((__be16 *) &msg[2]));
+		input_report_abs(ts->input, ABS_Y,
+				 be16_to_cpup((__be16 *) &msg[0]));
+		input_report_key(ts->input, BTN_TOUCH, 1);
+		input_sync(ts->input);
+	} else if (len == 0) {
+		input_report_abs(ts->input, ABS_X, 0);
+		input_report_abs(ts->input, ABS_Y, 0);
+		input_report_key(ts->input, BTN_TOUCH, 0);
+		input_sync(ts->input);
+	}
+}
+
+static void micro_ts_toggle_receive(struct touchscreen_data *ts, bool enable)
+{
+	struct ipaq_micro *micro = ts->micro;
+
+	spin_lock_irq(&micro->lock);
+
+	if (enable) {
+		micro->ts = micro_ts_receive;
+		micro->ts_data = ts;
+	} else {
+		micro->ts = NULL;
+		micro->ts_data = NULL;
+	}
+
+	spin_unlock_irq(&ts->micro->lock);
+}
+
+static int micro_ts_open(struct input_dev *input)
+{
+	struct touchscreen_data *ts = input_get_drvdata(input);
+
+	micro_ts_toggle_receive(ts, true);
+
+	return 0;
+}
+
+static void micro_ts_close(struct input_dev *input)
+{
+	struct touchscreen_data *ts = input_get_drvdata(input);
+
+	micro_ts_toggle_receive(ts, false);
+}
+
+static int micro_ts_probe(struct platform_device *pdev)
+{
+	struct ipaq_micro *micro = dev_get_drvdata(pdev->dev.parent);
+	struct touchscreen_data *ts;
+	int error;
+
+	ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->micro = micro;
+
+	ts->input = devm_input_allocate_device(&pdev->dev);
+	if (!ts->input) {
+		dev_err(&pdev->dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	ts->input->name = "ipaq micro ts";
+	ts->input->open = micro_ts_open;
+	ts->input->close = micro_ts_close;
+
+	input_set_drvdata(ts->input, ts);
+
+	input_set_capability(ts->input, EV_KEY, BTN_TOUCH);
+	input_set_capability(ts->input, EV_ABS, ABS_X);
+	input_set_capability(ts->input, EV_ABS, ABS_Y);
+	input_set_abs_params(ts->input, ABS_X, 0, 1023, 0, 0);
+	input_set_abs_params(ts->input, ABS_Y, 0, 1023, 0, 0);
+
+	error = input_register_device(ts->input);
+	if (error) {
+		dev_err(&pdev->dev, "error registering touch input\n");
+		return error;
+	}
+
+	platform_set_drvdata(pdev, ts);
+
+	dev_info(&pdev->dev, "iPAQ micro touchscreen\n");
+
+	return 0;
+}
+
+static int __maybe_unused micro_ts_suspend(struct device *dev)
+{
+	struct touchscreen_data *ts = dev_get_drvdata(dev);
+
+	micro_ts_toggle_receive(ts, false);
+
+	return 0;
+}
+
+static int __maybe_unused micro_ts_resume(struct device *dev)
+{
+	struct touchscreen_data *ts = dev_get_drvdata(dev);
+	struct input_dev *input = ts->input;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users)
+		micro_ts_toggle_receive(ts, true);
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops micro_ts_dev_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(micro_ts_suspend, micro_ts_resume)
+};
+
+static struct platform_driver micro_ts_device_driver = {
+	.driver	= {
+		.name	= "ipaq-micro-ts",
+		.pm	= &micro_ts_dev_pm_ops,
+	},
+	.probe	= micro_ts_probe,
+};
+module_platform_driver(micro_ts_device_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("driver for iPAQ Atmel micro touchscreen");
+MODULE_ALIAS("platform:ipaq-micro-ts");
diff --git a/drivers/input/touchscreen/jornada720_ts.c b/drivers/input/touchscreen/jornada720_ts.c
new file mode 100644
index 0000000..ea3b6a5
--- /dev/null
+++ b/drivers/input/touchscreen/jornada720_ts.c
@@ -0,0 +1,153 @@
+/*
+ * drivers/input/touchscreen/jornada720_ts.c
+ *
+ * Copyright (C) 2007 Kristoffer Ericson <Kristoffer.Ericson@gmail.com>
+ *
+ *  Copyright (C) 2006 Filip Zyzniewski <filip.zyzniewski@tefnet.pl>
+ *  based on HP Jornada 56x touchscreen driver by Alex Lange <chicken@handhelds.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * HP Jornada 710/720/729 Touchscreen Driver
+ */
+
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <mach/hardware.h>
+#include <mach/jornada720.h>
+#include <mach/irqs.h>
+
+MODULE_AUTHOR("Kristoffer Ericson <kristoffer.ericson@gmail.com>");
+MODULE_DESCRIPTION("HP Jornada 710/720/728 touchscreen driver");
+MODULE_LICENSE("GPL v2");
+
+struct jornada_ts {
+	struct input_dev *dev;
+	int x_data[4];		/* X sample values */
+	int y_data[4];		/* Y sample values */
+};
+
+static void jornada720_ts_collect_data(struct jornada_ts *jornada_ts)
+{
+	/* 3 low word X samples */
+	jornada_ts->x_data[0] = jornada_ssp_byte(TXDUMMY);
+	jornada_ts->x_data[1] = jornada_ssp_byte(TXDUMMY);
+	jornada_ts->x_data[2] = jornada_ssp_byte(TXDUMMY);
+
+	/* 3 low word Y samples */
+	jornada_ts->y_data[0] = jornada_ssp_byte(TXDUMMY);
+	jornada_ts->y_data[1] = jornada_ssp_byte(TXDUMMY);
+	jornada_ts->y_data[2] = jornada_ssp_byte(TXDUMMY);
+
+	/* combined x samples bits */
+	jornada_ts->x_data[3] = jornada_ssp_byte(TXDUMMY);
+
+	/* combined y samples bits */
+	jornada_ts->y_data[3] = jornada_ssp_byte(TXDUMMY);
+}
+
+static int jornada720_ts_average(int coords[4])
+{
+	int coord, high_bits = coords[3];
+
+	coord  = coords[0] | ((high_bits & 0x03) << 8);
+	coord += coords[1] | ((high_bits & 0x0c) << 6);
+	coord += coords[2] | ((high_bits & 0x30) << 4);
+
+	return coord / 3;
+}
+
+static irqreturn_t jornada720_ts_interrupt(int irq, void *dev_id)
+{
+	struct platform_device *pdev = dev_id;
+	struct jornada_ts *jornada_ts = platform_get_drvdata(pdev);
+	struct input_dev *input = jornada_ts->dev;
+	int x, y;
+
+	/* If GPIO_GPIO9 is set to high then report pen up */
+	if (GPLR & GPIO_GPIO(9)) {
+		input_report_key(input, BTN_TOUCH, 0);
+		input_sync(input);
+	} else {
+		jornada_ssp_start();
+
+		/* proper reply to request is always TXDUMMY */
+		if (jornada_ssp_inout(GETTOUCHSAMPLES) == TXDUMMY) {
+			jornada720_ts_collect_data(jornada_ts);
+
+			x = jornada720_ts_average(jornada_ts->x_data);
+			y = jornada720_ts_average(jornada_ts->y_data);
+
+			input_report_key(input, BTN_TOUCH, 1);
+			input_report_abs(input, ABS_X, x);
+			input_report_abs(input, ABS_Y, y);
+			input_sync(input);
+		}
+
+		jornada_ssp_end();
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int jornada720_ts_probe(struct platform_device *pdev)
+{
+	struct jornada_ts *jornada_ts;
+	struct input_dev *input_dev;
+	int error;
+
+	jornada_ts = devm_kzalloc(&pdev->dev, sizeof(*jornada_ts), GFP_KERNEL);
+	if (!jornada_ts)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!input_dev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, jornada_ts);
+
+	jornada_ts->dev = input_dev;
+
+	input_dev->name = "HP Jornada 7xx Touchscreen";
+	input_dev->phys = "jornadats/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, 270, 3900, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 180, 3700, 0, 0);
+
+	error = devm_request_irq(&pdev->dev, IRQ_GPIO9,
+				 jornada720_ts_interrupt,
+				 IRQF_TRIGGER_RISING,
+				 "HP7XX Touchscreen driver", pdev);
+	if (error) {
+		dev_err(&pdev->dev, "HP7XX TS : Unable to acquire irq!\n");
+		return error;
+	}
+
+	error = input_register_device(jornada_ts->dev);
+	if (error)
+		return error;
+
+	return 0;
+}
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:jornada_ts");
+
+static struct platform_driver jornada720_ts_driver = {
+	.probe		= jornada720_ts_probe,
+	.driver		= {
+		.name	= "jornada_ts",
+	},
+};
+module_platform_driver(jornada720_ts_driver);
diff --git a/drivers/input/touchscreen/lpc32xx_ts.c b/drivers/input/touchscreen/lpc32xx_ts.c
new file mode 100644
index 0000000..7fbb3b0
--- /dev/null
+++ b/drivers/input/touchscreen/lpc32xx_ts.c
@@ -0,0 +1,408 @@
+/*
+ * LPC32xx built-in touchscreen driver
+ *
+ * Copyright (C) 2010 NXP Semiconductors
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+
+/*
+ * Touchscreen controller register offsets
+ */
+#define LPC32XX_TSC_STAT			0x00
+#define LPC32XX_TSC_SEL				0x04
+#define LPC32XX_TSC_CON				0x08
+#define LPC32XX_TSC_FIFO			0x0C
+#define LPC32XX_TSC_DTR				0x10
+#define LPC32XX_TSC_RTR				0x14
+#define LPC32XX_TSC_UTR				0x18
+#define LPC32XX_TSC_TTR				0x1C
+#define LPC32XX_TSC_DXP				0x20
+#define LPC32XX_TSC_MIN_X			0x24
+#define LPC32XX_TSC_MAX_X			0x28
+#define LPC32XX_TSC_MIN_Y			0x2C
+#define LPC32XX_TSC_MAX_Y			0x30
+#define LPC32XX_TSC_AUX_UTR			0x34
+#define LPC32XX_TSC_AUX_MIN			0x38
+#define LPC32XX_TSC_AUX_MAX			0x3C
+
+#define LPC32XX_TSC_STAT_FIFO_OVRRN		(1 << 8)
+#define LPC32XX_TSC_STAT_FIFO_EMPTY		(1 << 7)
+
+#define LPC32XX_TSC_SEL_DEFVAL			0x0284
+
+#define LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4	(0x1 << 11)
+#define LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(s)	((10 - (s)) << 7)
+#define LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(s)	((10 - (s)) << 4)
+#define LPC32XX_TSC_ADCCON_POWER_UP		(1 << 2)
+#define LPC32XX_TSC_ADCCON_AUTO_EN		(1 << 0)
+
+#define LPC32XX_TSC_FIFO_TS_P_LEVEL		(1 << 31)
+#define LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(x)	(((x) & 0x03FF0000) >> 16)
+#define LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(y)	((y) & 0x000003FF)
+
+#define LPC32XX_TSC_ADCDAT_VALUE_MASK		0x000003FF
+
+#define LPC32XX_TSC_MIN_XY_VAL			0x0
+#define LPC32XX_TSC_MAX_XY_VAL			0x3FF
+
+#define MOD_NAME "ts-lpc32xx"
+
+#define tsc_readl(dev, reg) \
+	__raw_readl((dev)->tsc_base + (reg))
+#define tsc_writel(dev, reg, val) \
+	__raw_writel((val), (dev)->tsc_base + (reg))
+
+struct lpc32xx_tsc {
+	struct input_dev *dev;
+	void __iomem *tsc_base;
+	int irq;
+	struct clk *clk;
+};
+
+static void lpc32xx_fifo_clear(struct lpc32xx_tsc *tsc)
+{
+	while (!(tsc_readl(tsc, LPC32XX_TSC_STAT) &
+			LPC32XX_TSC_STAT_FIFO_EMPTY))
+		tsc_readl(tsc, LPC32XX_TSC_FIFO);
+}
+
+static irqreturn_t lpc32xx_ts_interrupt(int irq, void *dev_id)
+{
+	u32 tmp, rv[4], xs[4], ys[4];
+	int idx;
+	struct lpc32xx_tsc *tsc = dev_id;
+	struct input_dev *input = tsc->dev;
+
+	tmp = tsc_readl(tsc, LPC32XX_TSC_STAT);
+
+	if (tmp & LPC32XX_TSC_STAT_FIFO_OVRRN) {
+		/* FIFO overflow - throw away samples */
+		lpc32xx_fifo_clear(tsc);
+		return IRQ_HANDLED;
+	}
+
+	/*
+	 * Gather and normalize 4 samples. Pen-up events may have less
+	 * than 4 samples, but its ok to pop 4 and let the last sample
+	 * pen status check drop the samples.
+	 */
+	idx = 0;
+	while (idx < 4 &&
+	       !(tsc_readl(tsc, LPC32XX_TSC_STAT) &
+			LPC32XX_TSC_STAT_FIFO_EMPTY)) {
+		tmp = tsc_readl(tsc, LPC32XX_TSC_FIFO);
+		xs[idx] = LPC32XX_TSC_ADCDAT_VALUE_MASK -
+			LPC32XX_TSC_FIFO_NORMALIZE_X_VAL(tmp);
+		ys[idx] = LPC32XX_TSC_ADCDAT_VALUE_MASK -
+			LPC32XX_TSC_FIFO_NORMALIZE_Y_VAL(tmp);
+		rv[idx] = tmp;
+		idx++;
+	}
+
+	/* Data is only valid if pen is still down in last sample */
+	if (!(rv[3] & LPC32XX_TSC_FIFO_TS_P_LEVEL) && idx == 4) {
+		/* Use average of 2nd and 3rd sample for position */
+		input_report_abs(input, ABS_X, (xs[1] + xs[2]) / 2);
+		input_report_abs(input, ABS_Y, (ys[1] + ys[2]) / 2);
+		input_report_key(input, BTN_TOUCH, 1);
+	} else {
+		input_report_key(input, BTN_TOUCH, 0);
+	}
+
+	input_sync(input);
+
+	return IRQ_HANDLED;
+}
+
+static void lpc32xx_stop_tsc(struct lpc32xx_tsc *tsc)
+{
+	/* Disable auto mode */
+	tsc_writel(tsc, LPC32XX_TSC_CON,
+		   tsc_readl(tsc, LPC32XX_TSC_CON) &
+			     ~LPC32XX_TSC_ADCCON_AUTO_EN);
+
+	clk_disable_unprepare(tsc->clk);
+}
+
+static void lpc32xx_setup_tsc(struct lpc32xx_tsc *tsc)
+{
+	u32 tmp;
+
+	clk_prepare_enable(tsc->clk);
+
+	tmp = tsc_readl(tsc, LPC32XX_TSC_CON) & ~LPC32XX_TSC_ADCCON_POWER_UP;
+
+	/* Set the TSC FIFO depth to 4 samples @ 10-bits per sample (max) */
+	tmp = LPC32XX_TSC_ADCCON_IRQ_TO_FIFO_4 |
+	      LPC32XX_TSC_ADCCON_X_SAMPLE_SIZE(10) |
+	      LPC32XX_TSC_ADCCON_Y_SAMPLE_SIZE(10);
+	tsc_writel(tsc, LPC32XX_TSC_CON, tmp);
+
+	/* These values are all preset */
+	tsc_writel(tsc, LPC32XX_TSC_SEL, LPC32XX_TSC_SEL_DEFVAL);
+	tsc_writel(tsc, LPC32XX_TSC_MIN_X, LPC32XX_TSC_MIN_XY_VAL);
+	tsc_writel(tsc, LPC32XX_TSC_MAX_X, LPC32XX_TSC_MAX_XY_VAL);
+	tsc_writel(tsc, LPC32XX_TSC_MIN_Y, LPC32XX_TSC_MIN_XY_VAL);
+	tsc_writel(tsc, LPC32XX_TSC_MAX_Y, LPC32XX_TSC_MAX_XY_VAL);
+
+	/* Aux support is not used */
+	tsc_writel(tsc, LPC32XX_TSC_AUX_UTR, 0);
+	tsc_writel(tsc, LPC32XX_TSC_AUX_MIN, 0);
+	tsc_writel(tsc, LPC32XX_TSC_AUX_MAX, 0);
+
+	/*
+	 * Set sample rate to about 240Hz per X/Y pair. A single measurement
+	 * consists of 4 pairs which gives about a 60Hz sample rate based on
+	 * a stable 32768Hz clock source. Values are in clocks.
+	 * Rate is (32768 / (RTR + XCONV + RTR + YCONV + DXP + TTR + UTR) / 4
+	 */
+	tsc_writel(tsc, LPC32XX_TSC_RTR, 0x2);
+	tsc_writel(tsc, LPC32XX_TSC_DTR, 0x2);
+	tsc_writel(tsc, LPC32XX_TSC_TTR, 0x10);
+	tsc_writel(tsc, LPC32XX_TSC_DXP, 0x4);
+	tsc_writel(tsc, LPC32XX_TSC_UTR, 88);
+
+	lpc32xx_fifo_clear(tsc);
+
+	/* Enable automatic ts event capture */
+	tsc_writel(tsc, LPC32XX_TSC_CON, tmp | LPC32XX_TSC_ADCCON_AUTO_EN);
+}
+
+static int lpc32xx_ts_open(struct input_dev *dev)
+{
+	struct lpc32xx_tsc *tsc = input_get_drvdata(dev);
+
+	lpc32xx_setup_tsc(tsc);
+
+	return 0;
+}
+
+static void lpc32xx_ts_close(struct input_dev *dev)
+{
+	struct lpc32xx_tsc *tsc = input_get_drvdata(dev);
+
+	lpc32xx_stop_tsc(tsc);
+}
+
+static int lpc32xx_ts_probe(struct platform_device *pdev)
+{
+	struct lpc32xx_tsc *tsc;
+	struct input_dev *input;
+	struct resource *res;
+	resource_size_t size;
+	int irq;
+	int error;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(&pdev->dev, "Can't get memory resource\n");
+		return -ENOENT;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(&pdev->dev, "Can't get interrupt resource\n");
+		return irq;
+	}
+
+	tsc = kzalloc(sizeof(*tsc), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!tsc || !input) {
+		dev_err(&pdev->dev, "failed allocating memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tsc->dev = input;
+	tsc->irq = irq;
+
+	size = resource_size(res);
+
+	if (!request_mem_region(res->start, size, pdev->name)) {
+		dev_err(&pdev->dev, "TSC registers are not free\n");
+		error = -EBUSY;
+		goto err_free_mem;
+	}
+
+	tsc->tsc_base = ioremap(res->start, size);
+	if (!tsc->tsc_base) {
+		dev_err(&pdev->dev, "Can't map memory\n");
+		error = -ENOMEM;
+		goto err_release_mem;
+	}
+
+	tsc->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(tsc->clk)) {
+		dev_err(&pdev->dev, "failed getting clock\n");
+		error = PTR_ERR(tsc->clk);
+		goto err_unmap;
+	}
+
+	input->name = MOD_NAME;
+	input->phys = "lpc32xx/input0";
+	input->id.bustype = BUS_HOST;
+	input->id.vendor = 0x0001;
+	input->id.product = 0x0002;
+	input->id.version = 0x0100;
+	input->dev.parent = &pdev->dev;
+	input->open = lpc32xx_ts_open;
+	input->close = lpc32xx_ts_close;
+
+	input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input, ABS_X, LPC32XX_TSC_MIN_XY_VAL,
+			     LPC32XX_TSC_MAX_XY_VAL, 0, 0);
+	input_set_abs_params(input, ABS_Y, LPC32XX_TSC_MIN_XY_VAL,
+			     LPC32XX_TSC_MAX_XY_VAL, 0, 0);
+
+	input_set_drvdata(input, tsc);
+
+	error = request_irq(tsc->irq, lpc32xx_ts_interrupt,
+			    0, pdev->name, tsc);
+	if (error) {
+		dev_err(&pdev->dev, "failed requesting interrupt\n");
+		goto err_put_clock;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(&pdev->dev, "failed registering input device\n");
+		goto err_free_irq;
+	}
+
+	platform_set_drvdata(pdev, tsc);
+	device_init_wakeup(&pdev->dev, 1);
+
+	return 0;
+
+err_free_irq:
+	free_irq(tsc->irq, tsc);
+err_put_clock:
+	clk_put(tsc->clk);
+err_unmap:
+	iounmap(tsc->tsc_base);
+err_release_mem:
+	release_mem_region(res->start, size);
+err_free_mem:
+	input_free_device(input);
+	kfree(tsc);
+
+	return error;
+}
+
+static int lpc32xx_ts_remove(struct platform_device *pdev)
+{
+	struct lpc32xx_tsc *tsc = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	device_init_wakeup(&pdev->dev, 0);
+	free_irq(tsc->irq, tsc);
+
+	input_unregister_device(tsc->dev);
+
+	clk_put(tsc->clk);
+
+	iounmap(tsc->tsc_base);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	kfree(tsc);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_ts_suspend(struct device *dev)
+{
+	struct lpc32xx_tsc *tsc = dev_get_drvdata(dev);
+	struct input_dev *input = tsc->dev;
+
+	/*
+	 * Suspend and resume can be called when the device hasn't been
+	 * enabled. If there are no users that have the device open, then
+	 * avoid calling the TSC stop and start functions as the TSC
+	 * isn't yet clocked.
+	 */
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		if (device_may_wakeup(dev))
+			enable_irq_wake(tsc->irq);
+		else
+			lpc32xx_stop_tsc(tsc);
+	}
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static int lpc32xx_ts_resume(struct device *dev)
+{
+	struct lpc32xx_tsc *tsc = dev_get_drvdata(dev);
+	struct input_dev *input = tsc->dev;
+
+	mutex_lock(&input->mutex);
+
+	if (input->users) {
+		if (device_may_wakeup(dev))
+			disable_irq_wake(tsc->irq);
+		else
+			lpc32xx_setup_tsc(tsc);
+	}
+
+	mutex_unlock(&input->mutex);
+
+	return 0;
+}
+
+static const struct dev_pm_ops lpc32xx_ts_pm_ops = {
+	.suspend	= lpc32xx_ts_suspend,
+	.resume		= lpc32xx_ts_resume,
+};
+#define LPC32XX_TS_PM_OPS (&lpc32xx_ts_pm_ops)
+#else
+#define LPC32XX_TS_PM_OPS NULL
+#endif
+
+#ifdef CONFIG_OF
+static const struct of_device_id lpc32xx_tsc_of_match[] = {
+	{ .compatible = "nxp,lpc3220-tsc", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_tsc_of_match);
+#endif
+
+static struct platform_driver lpc32xx_ts_driver = {
+	.probe		= lpc32xx_ts_probe,
+	.remove		= lpc32xx_ts_remove,
+	.driver		= {
+		.name	= MOD_NAME,
+		.pm	= LPC32XX_TS_PM_OPS,
+		.of_match_table = of_match_ptr(lpc32xx_tsc_of_match),
+	},
+};
+module_platform_driver(lpc32xx_ts_driver);
+
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com");
+MODULE_DESCRIPTION("LPC32XX TSC Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:lpc32xx_ts");
diff --git a/drivers/input/touchscreen/mainstone-wm97xx.c b/drivers/input/touchscreen/mainstone-wm97xx.c
new file mode 100644
index 0000000..0786010
--- /dev/null
+++ b/drivers/input/touchscreen/mainstone-wm97xx.c
@@ -0,0 +1,309 @@
+/*
+ * mainstone-wm97xx.c  --  Mainstone Continuous Touch screen driver for
+ *                         Wolfson WM97xx AC97 Codecs.
+ *
+ * Copyright 2004, 2007 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Notes:
+ *     This is a wm97xx extended touch driver to capture touch
+ *     data in a continuous manner on the Intel XScale architecture
+ *
+ *  Features:
+ *       - codecs supported:- WM9705, WM9712, WM9713
+ *       - processors supported:- Intel XScale PXA25x, PXA26x, PXA27x
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/wm97xx.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/regs-ac97.h>
+
+#include <asm/mach-types.h>
+
+struct continuous {
+	u16 id;    /* codec id */
+	u8 code;   /* continuous code */
+	u8 reads;  /* number of coord reads per read cycle */
+	u32 speed; /* number of coords per second */
+};
+
+#define WM_READS(sp) ((sp / HZ) + 1)
+
+static const struct continuous cinfo[] = {
+	{WM9705_ID2, 0, WM_READS(94), 94},
+	{WM9705_ID2, 1, WM_READS(188), 188},
+	{WM9705_ID2, 2, WM_READS(375), 375},
+	{WM9705_ID2, 3, WM_READS(750), 750},
+	{WM9712_ID2, 0, WM_READS(94), 94},
+	{WM9712_ID2, 1, WM_READS(188), 188},
+	{WM9712_ID2, 2, WM_READS(375), 375},
+	{WM9712_ID2, 3, WM_READS(750), 750},
+	{WM9713_ID2, 0, WM_READS(94), 94},
+	{WM9713_ID2, 1, WM_READS(120), 120},
+	{WM9713_ID2, 2, WM_READS(154), 154},
+	{WM9713_ID2, 3, WM_READS(188), 188},
+};
+
+/* continuous speed index */
+static int sp_idx;
+static u16 last, tries;
+static int irq;
+
+/*
+ * Pen sampling frequency (Hz) in continuous mode.
+ */
+static int cont_rate = 200;
+module_param(cont_rate, int, 0);
+MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
+
+/*
+ * Pen down detection.
+ *
+ * This driver can either poll or use an interrupt to indicate a pen down
+ * event. If the irq request fails then it will fall back to polling mode.
+ */
+static int pen_int;
+module_param(pen_int, int, 0);
+MODULE_PARM_DESC(pen_int, "Pen down detection (1 = interrupt, 0 = polling)");
+
+/*
+ * Pressure readback.
+ *
+ * Set to 1 to read back pen down pressure
+ */
+static int pressure;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
+
+/*
+ * AC97 touch data slot.
+ *
+ * Touch screen readback data ac97 slot
+ */
+static int ac97_touch_slot = 5;
+module_param(ac97_touch_slot, int, 0);
+MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
+
+
+/* flush AC97 slot 5 FIFO on pxa machines */
+#ifdef CONFIG_PXA27x
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+	schedule_timeout_uninterruptible(1);
+
+	while (MISR & (1 << 2))
+		MODR;
+}
+#else
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+	unsigned int count;
+
+	schedule_timeout_uninterruptible(1);
+
+	for (count = 0; count < 16; count++)
+		MODR;
+}
+#endif
+
+static int wm97xx_acc_pen_down(struct wm97xx *wm)
+{
+	u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
+	int reads = 0;
+
+	/* When the AC97 queue has been drained we need to allow time
+	 * to buffer up samples otherwise we end up spinning polling
+	 * for samples.  The controller can't have a suitably low
+	 * threshold set to use the notifications it gives.
+	 */
+	schedule_timeout_uninterruptible(1);
+
+	if (tries > 5) {
+		tries = 0;
+		return RC_PENUP;
+	}
+
+	x = MODR;
+	if (x == last) {
+		tries++;
+		return RC_AGAIN;
+	}
+	last = x;
+	do {
+		if (reads)
+			x = MODR;
+		y = MODR;
+		if (pressure)
+			p = MODR;
+
+		dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
+			x, y, p);
+
+		/* are samples valid */
+		if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
+		    (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
+		    (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
+			goto up;
+
+		/* coordinate is good */
+		tries = 0;
+		input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
+		input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
+		input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
+		input_report_key(wm->input_dev, BTN_TOUCH, (p != 0));
+		input_sync(wm->input_dev);
+		reads++;
+	} while (reads < cinfo[sp_idx].reads);
+up:
+	return RC_PENDOWN | RC_AGAIN;
+}
+
+static int wm97xx_acc_startup(struct wm97xx *wm)
+{
+	int idx = 0, ret = 0;
+
+	/* check we have a codec */
+	if (wm->ac97 == NULL)
+		return -ENODEV;
+
+	/* Go you big red fire engine */
+	for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
+		if (wm->id != cinfo[idx].id)
+			continue;
+		sp_idx = idx;
+		if (cont_rate <= cinfo[idx].speed)
+			break;
+	}
+	wm->acc_rate = cinfo[sp_idx].code;
+	wm->acc_slot = ac97_touch_slot;
+	dev_info(wm->dev,
+		 "mainstone accelerated touchscreen driver, %d samples/sec\n",
+		 cinfo[sp_idx].speed);
+
+	/* IRQ driven touchscreen is used on Palm hardware */
+	if (machine_is_palmt5() || machine_is_palmtx() || machine_is_palmld()) {
+		pen_int = 1;
+		irq = 27;
+		/* There is some obscure mutant of WM9712 interbred with WM9713
+		 * used on Palm HW */
+		wm->variant = WM97xx_WM1613;
+	} else if (machine_is_mainstone() && pen_int)
+		irq = 4;
+
+	if (irq) {
+		ret = gpio_request(irq, "Touchscreen IRQ");
+		if (ret)
+			goto out;
+
+		ret = gpio_direction_input(irq);
+		if (ret) {
+			gpio_free(irq);
+			goto out;
+		}
+
+		wm->pen_irq = gpio_to_irq(irq);
+		irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
+	} else /* pen irq not supported */
+		pen_int = 0;
+
+	/* codec specific irq config */
+	if (pen_int) {
+		switch (wm->id) {
+		case WM9705_ID2:
+			break;
+		case WM9712_ID2:
+		case WM9713_ID2:
+			/* use PEN_DOWN GPIO 13 to assert IRQ on GPIO line 2 */
+			wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
+					   WM97XX_GPIO_POL_HIGH,
+					   WM97XX_GPIO_STICKY,
+					   WM97XX_GPIO_WAKE);
+			wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
+					   WM97XX_GPIO_POL_HIGH,
+					   WM97XX_GPIO_NOTSTICKY,
+					   WM97XX_GPIO_NOWAKE);
+			break;
+		default:
+			dev_err(wm->dev,
+				"pen down irq not supported on this device\n");
+			pen_int = 0;
+			break;
+		}
+	}
+
+out:
+	return ret;
+}
+
+static void wm97xx_acc_shutdown(struct wm97xx *wm)
+{
+	/* codec specific deconfig */
+	if (pen_int) {
+		if (irq)
+			gpio_free(irq);
+		wm->pen_irq = 0;
+	}
+}
+
+static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
+{
+	if (enable)
+		enable_irq(wm->pen_irq);
+	else
+		disable_irq_nosync(wm->pen_irq);
+}
+
+static struct wm97xx_mach_ops mainstone_mach_ops = {
+	.acc_enabled = 1,
+	.acc_pen_up = wm97xx_acc_pen_up,
+	.acc_pen_down = wm97xx_acc_pen_down,
+	.acc_startup = wm97xx_acc_startup,
+	.acc_shutdown = wm97xx_acc_shutdown,
+	.irq_enable = wm97xx_irq_enable,
+	.irq_gpio = WM97XX_GPIO_2,
+};
+
+static int mainstone_wm97xx_probe(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+
+	return wm97xx_register_mach_ops(wm, &mainstone_mach_ops);
+}
+
+static int mainstone_wm97xx_remove(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+
+	wm97xx_unregister_mach_ops(wm);
+	return 0;
+}
+
+static struct platform_driver mainstone_wm97xx_driver = {
+	.probe = mainstone_wm97xx_probe,
+	.remove = mainstone_wm97xx_remove,
+	.driver = {
+		.name = "wm97xx-touch",
+	},
+};
+module_platform_driver(mainstone_wm97xx_driver);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
+MODULE_DESCRIPTION("wm97xx continuous touch driver for mainstone");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/max11801_ts.c b/drivers/input/touchscreen/max11801_ts.c
new file mode 100644
index 0000000..82079cd
--- /dev/null
+++ b/drivers/input/touchscreen/max11801_ts.c
@@ -0,0 +1,241 @@
+/*
+ * Driver for MAXI MAX11801 - A Resistive touch screen controller with
+ * i2c interface
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Zhang Jiejing <jiejing.zhang@freescale.com>
+ *
+ * Based on mcs5000_ts.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/*
+ * This driver aims to support the series of MAXI touch chips max11801
+ * through max11803. The main difference between these 4 chips can be
+ * found in the table below:
+ * -----------------------------------------------------
+ * | CHIP     |  AUTO MODE SUPPORT(FIFO) | INTERFACE    |
+ * |----------------------------------------------------|
+ * | max11800 |  YES                     |   SPI        |
+ * | max11801 |  YES                     |   I2C        |
+ * | max11802 |  NO                      |   SPI        |
+ * | max11803 |  NO                      |   I2C        |
+ * ------------------------------------------------------
+ *
+ * Currently, this driver only supports max11801.
+ *
+ * Data Sheet:
+ * http://www.maxim-ic.com/datasheet/index.mvp/id/5943
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+
+/* Register Address define */
+#define GENERNAL_STATUS_REG		0x00
+#define GENERNAL_CONF_REG		0x01
+#define MESURE_RES_CONF_REG		0x02
+#define MESURE_AVER_CONF_REG		0x03
+#define ADC_SAMPLE_TIME_CONF_REG	0x04
+#define PANEL_SETUPTIME_CONF_REG	0x05
+#define DELAY_CONVERSION_CONF_REG	0x06
+#define TOUCH_DETECT_PULLUP_CONF_REG	0x07
+#define AUTO_MODE_TIME_CONF_REG		0x08 /* only for max11800/max11801 */
+#define APERTURE_CONF_REG		0x09 /* only for max11800/max11801 */
+#define AUX_MESURE_CONF_REG		0x0a
+#define OP_MODE_CONF_REG		0x0b
+
+/* FIFO is found only in max11800 and max11801 */
+#define FIFO_RD_CMD			(0x50 << 1)
+#define MAX11801_FIFO_INT		(1 << 2)
+#define MAX11801_FIFO_OVERFLOW		(1 << 3)
+
+#define XY_BUFSIZE			4
+#define XY_BUF_OFFSET			4
+
+#define MAX11801_MAX_X			0xfff
+#define MAX11801_MAX_Y			0xfff
+
+#define MEASURE_TAG_OFFSET		2
+#define MEASURE_TAG_MASK		(3 << MEASURE_TAG_OFFSET)
+#define EVENT_TAG_OFFSET		0
+#define EVENT_TAG_MASK			(3 << EVENT_TAG_OFFSET)
+#define MEASURE_X_TAG			(0 << MEASURE_TAG_OFFSET)
+#define MEASURE_Y_TAG			(1 << MEASURE_TAG_OFFSET)
+
+/* These are the state of touch event state machine */
+enum {
+	EVENT_INIT,
+	EVENT_MIDDLE,
+	EVENT_RELEASE,
+	EVENT_FIFO_END
+};
+
+struct max11801_data {
+	struct i2c_client		*client;
+	struct input_dev		*input_dev;
+};
+
+static u8 read_register(struct i2c_client *client, int addr)
+{
+	/* XXX: The chip ignores LSB of register address */
+	return i2c_smbus_read_byte_data(client, addr << 1);
+}
+
+static int max11801_write_reg(struct i2c_client *client, int addr, int data)
+{
+	/* XXX: The chip ignores LSB of register address */
+	return i2c_smbus_write_byte_data(client, addr << 1, data);
+}
+
+static irqreturn_t max11801_ts_interrupt(int irq, void *dev_id)
+{
+	struct max11801_data *data = dev_id;
+	struct i2c_client *client = data->client;
+	int status, i, ret;
+	u8 buf[XY_BUFSIZE];
+	int x = -1;
+	int y = -1;
+
+	status = read_register(data->client, GENERNAL_STATUS_REG);
+
+	if (status & (MAX11801_FIFO_INT | MAX11801_FIFO_OVERFLOW)) {
+		status = read_register(data->client, GENERNAL_STATUS_REG);
+
+		ret = i2c_smbus_read_i2c_block_data(client, FIFO_RD_CMD,
+						    XY_BUFSIZE, buf);
+
+		/*
+		 * We should get 4 bytes buffer that contains X,Y
+		 * and event tag
+		 */
+		if (ret < XY_BUFSIZE)
+			goto out;
+
+		for (i = 0; i < XY_BUFSIZE; i += XY_BUFSIZE / 2) {
+			if ((buf[i + 1] & MEASURE_TAG_MASK) == MEASURE_X_TAG)
+				x = (buf[i] << XY_BUF_OFFSET) +
+				    (buf[i + 1] >> XY_BUF_OFFSET);
+			else if ((buf[i + 1] & MEASURE_TAG_MASK) == MEASURE_Y_TAG)
+				y = (buf[i] << XY_BUF_OFFSET) +
+				    (buf[i + 1] >> XY_BUF_OFFSET);
+		}
+
+		if ((buf[1] & EVENT_TAG_MASK) != (buf[3] & EVENT_TAG_MASK))
+			goto out;
+
+		switch (buf[1] & EVENT_TAG_MASK) {
+		case EVENT_INIT:
+			/* fall through */
+		case EVENT_MIDDLE:
+			input_report_abs(data->input_dev, ABS_X, x);
+			input_report_abs(data->input_dev, ABS_Y, y);
+			input_event(data->input_dev, EV_KEY, BTN_TOUCH, 1);
+			input_sync(data->input_dev);
+			break;
+
+		case EVENT_RELEASE:
+			input_event(data->input_dev, EV_KEY, BTN_TOUCH, 0);
+			input_sync(data->input_dev);
+			break;
+
+		case EVENT_FIFO_END:
+			break;
+		}
+	}
+out:
+	return IRQ_HANDLED;
+}
+
+static void max11801_ts_phy_init(struct max11801_data *data)
+{
+	struct i2c_client *client = data->client;
+
+	/* Average X,Y, take 16 samples, average eight media sample */
+	max11801_write_reg(client, MESURE_AVER_CONF_REG, 0xff);
+	/* X,Y panel setup time set to 20us */
+	max11801_write_reg(client, PANEL_SETUPTIME_CONF_REG, 0x11);
+	/* Rough pullup time (2uS), Fine pullup time (10us)  */
+	max11801_write_reg(client, TOUCH_DETECT_PULLUP_CONF_REG, 0x10);
+	/* Auto mode init period = 5ms , scan period = 5ms*/
+	max11801_write_reg(client, AUTO_MODE_TIME_CONF_REG, 0xaa);
+	/* Aperture X,Y set to +- 4LSB */
+	max11801_write_reg(client, APERTURE_CONF_REG, 0x33);
+	/* Enable Power, enable Automode, enable Aperture, enable Average X,Y */
+	max11801_write_reg(client, OP_MODE_CONF_REG, 0x36);
+}
+
+static int max11801_ts_probe(struct i2c_client *client,
+				       const struct i2c_device_id *id)
+{
+	struct max11801_data *data;
+	struct input_dev *input_dev;
+	int error;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	data->client = client;
+	data->input_dev = input_dev;
+
+	input_dev->name = "max11801_ts";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_abs_params(input_dev, ABS_X, 0, MAX11801_MAX_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX11801_MAX_Y, 0, 0);
+	input_set_drvdata(input_dev, data);
+
+	max11801_ts_phy_init(data);
+
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+					  max11801_ts_interrupt,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  "max11801_ts", data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		return error;
+	}
+
+	error = input_register_device(data->input_dev);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, data);
+	return 0;
+}
+
+static const struct i2c_device_id max11801_ts_id[] = {
+	{"max11801", 0},
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, max11801_ts_id);
+
+static struct i2c_driver max11801_ts_driver = {
+	.driver = {
+		.name	= "max11801_ts",
+	},
+	.id_table	= max11801_ts_id,
+	.probe		= max11801_ts_probe,
+};
+
+module_i2c_driver(max11801_ts_driver);
+
+MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>");
+MODULE_DESCRIPTION("Touchscreen driver for MAXI MAX11801 controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/mc13783_ts.c b/drivers/input/touchscreen/mc13783_ts.c
new file mode 100644
index 0000000..913e25a
--- /dev/null
+++ b/drivers/input/touchscreen/mc13783_ts.c
@@ -0,0 +1,255 @@
+/*
+ * Driver for the Freescale Semiconductor MC13783 touchscreen.
+ *
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright (C) 2009 Sascha Hauer, Pengutronix
+ *
+ * Initial development of this code was funded by
+ * Phytec Messtechnik GmbH, http://www.phytec.de/
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+#include <linux/platform_device.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+
+#define MC13783_TS_NAME	"mc13783-ts"
+
+#define DEFAULT_SAMPLE_TOLERANCE 300
+
+static unsigned int sample_tolerance = DEFAULT_SAMPLE_TOLERANCE;
+module_param(sample_tolerance, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(sample_tolerance,
+		"If the minimal and maximal value read out for one axis (out "
+		"of three) differ by this value (default: "
+		__stringify(DEFAULT_SAMPLE_TOLERANCE) ") or more, the reading "
+		"is supposed to be wrong and is discarded.  Set to 0 to "
+		"disable this check.");
+
+struct mc13783_ts_priv {
+	struct input_dev *idev;
+	struct mc13xxx *mc13xxx;
+	struct delayed_work work;
+	struct workqueue_struct *workq;
+	unsigned int sample[4];
+	struct mc13xxx_ts_platform_data *touch;
+};
+
+static irqreturn_t mc13783_ts_handler(int irq, void *data)
+{
+	struct mc13783_ts_priv *priv = data;
+
+	mc13xxx_irq_ack(priv->mc13xxx, irq);
+
+	/*
+	 * Kick off reading coordinates. Note that if work happens already
+	 * be queued for future execution (it rearms itself) it will not
+	 * be rescheduled for immediate execution here. However the rearm
+	 * delay is HZ / 50 which is acceptable.
+	 */
+	queue_delayed_work(priv->workq, &priv->work, 0);
+
+	return IRQ_HANDLED;
+}
+
+#define sort3(a0, a1, a2) ({						\
+		if (a0 > a1)						\
+			swap(a0, a1);					\
+		if (a1 > a2)						\
+			swap(a1, a2);					\
+		if (a0 > a1)						\
+			swap(a0, a1);					\
+		})
+
+static void mc13783_ts_report_sample(struct mc13783_ts_priv *priv)
+{
+	struct input_dev *idev = priv->idev;
+	int x0, x1, x2, y0, y1, y2;
+	int cr0, cr1;
+
+	/*
+	 * the values are 10-bit wide only, but the two least significant
+	 * bits are for future 12 bit use and reading yields 0
+	 */
+	x0 = priv->sample[0] & 0xfff;
+	x1 = priv->sample[1] & 0xfff;
+	x2 = priv->sample[2] & 0xfff;
+	y0 = priv->sample[3] & 0xfff;
+	y1 = (priv->sample[0] >> 12) & 0xfff;
+	y2 = (priv->sample[1] >> 12) & 0xfff;
+	cr0 = (priv->sample[2] >> 12) & 0xfff;
+	cr1 = (priv->sample[3] >> 12) & 0xfff;
+
+	dev_dbg(&idev->dev,
+		"x: (% 4d,% 4d,% 4d) y: (% 4d, % 4d,% 4d) cr: (% 4d, % 4d)\n",
+		x0, x1, x2, y0, y1, y2, cr0, cr1);
+
+	sort3(x0, x1, x2);
+	sort3(y0, y1, y2);
+
+	cr0 = (cr0 + cr1) / 2;
+
+	if (!cr0 || !sample_tolerance ||
+			(x2 - x0 < sample_tolerance &&
+			 y2 - y0 < sample_tolerance)) {
+		/* report the median coordinate and average pressure */
+		if (cr0) {
+			input_report_abs(idev, ABS_X, x1);
+			input_report_abs(idev, ABS_Y, y1);
+
+			dev_dbg(&idev->dev, "report (%d, %d, %d)\n",
+					x1, y1, 0x1000 - cr0);
+			queue_delayed_work(priv->workq, &priv->work, HZ / 50);
+		} else
+			dev_dbg(&idev->dev, "report release\n");
+
+		input_report_abs(idev, ABS_PRESSURE,
+				cr0 ? 0x1000 - cr0 : cr0);
+		input_report_key(idev, BTN_TOUCH, cr0);
+		input_sync(idev);
+	} else
+		dev_dbg(&idev->dev, "discard event\n");
+}
+
+static void mc13783_ts_work(struct work_struct *work)
+{
+	struct mc13783_ts_priv *priv =
+		container_of(work, struct mc13783_ts_priv, work.work);
+	unsigned int mode = MC13XXX_ADC_MODE_TS;
+	unsigned int channel = 12;
+
+	if (mc13xxx_adc_do_conversion(priv->mc13xxx,
+				mode, channel,
+				priv->touch->ato, priv->touch->atox,
+				priv->sample) == 0)
+		mc13783_ts_report_sample(priv);
+}
+
+static int mc13783_ts_open(struct input_dev *dev)
+{
+	struct mc13783_ts_priv *priv = input_get_drvdata(dev);
+	int ret;
+
+	mc13xxx_lock(priv->mc13xxx);
+
+	mc13xxx_irq_ack(priv->mc13xxx, MC13XXX_IRQ_TS);
+
+	ret = mc13xxx_irq_request(priv->mc13xxx, MC13XXX_IRQ_TS,
+		mc13783_ts_handler, MC13783_TS_NAME, priv);
+	if (ret)
+		goto out;
+
+	ret = mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
+			MC13XXX_ADC0_TSMOD_MASK, MC13XXX_ADC0_TSMOD0);
+	if (ret)
+		mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
+out:
+	mc13xxx_unlock(priv->mc13xxx);
+	return ret;
+}
+
+static void mc13783_ts_close(struct input_dev *dev)
+{
+	struct mc13783_ts_priv *priv = input_get_drvdata(dev);
+
+	mc13xxx_lock(priv->mc13xxx);
+	mc13xxx_reg_rmw(priv->mc13xxx, MC13XXX_ADC0,
+			MC13XXX_ADC0_TSMOD_MASK, 0);
+	mc13xxx_irq_free(priv->mc13xxx, MC13XXX_IRQ_TS, priv);
+	mc13xxx_unlock(priv->mc13xxx);
+
+	cancel_delayed_work_sync(&priv->work);
+}
+
+static int __init mc13783_ts_probe(struct platform_device *pdev)
+{
+	struct mc13783_ts_priv *priv;
+	struct input_dev *idev;
+	int ret = -ENOMEM;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	idev = input_allocate_device();
+	if (!priv || !idev)
+		goto err_free_mem;
+
+	INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
+	priv->mc13xxx = dev_get_drvdata(pdev->dev.parent);
+	priv->idev = idev;
+	priv->touch = dev_get_platdata(&pdev->dev);
+	if (!priv->touch) {
+		dev_err(&pdev->dev, "missing platform data\n");
+		ret = -ENODEV;
+		goto err_free_mem;
+	}
+
+	/*
+	 * We need separate workqueue because mc13783_adc_do_conversion
+	 * uses keventd and thus would deadlock.
+	 */
+	priv->workq = create_singlethread_workqueue("mc13783_ts");
+	if (!priv->workq)
+		goto err_free_mem;
+
+	idev->name = MC13783_TS_NAME;
+	idev->dev.parent = &pdev->dev;
+
+	idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(idev, ABS_X, 0, 0xfff, 0, 0);
+	input_set_abs_params(idev, ABS_Y, 0, 0xfff, 0, 0);
+	input_set_abs_params(idev, ABS_PRESSURE, 0, 0xfff, 0, 0);
+
+	idev->open = mc13783_ts_open;
+	idev->close = mc13783_ts_close;
+
+	input_set_drvdata(idev, priv);
+
+	ret = input_register_device(priv->idev);
+	if (ret) {
+		dev_err(&pdev->dev,
+			"register input device failed with %d\n", ret);
+		goto err_destroy_wq;
+	}
+
+	platform_set_drvdata(pdev, priv);
+	return 0;
+
+err_destroy_wq:
+	destroy_workqueue(priv->workq);
+err_free_mem:
+	input_free_device(idev);
+	kfree(priv);
+	return ret;
+}
+
+static int mc13783_ts_remove(struct platform_device *pdev)
+{
+	struct mc13783_ts_priv *priv = platform_get_drvdata(pdev);
+
+	destroy_workqueue(priv->workq);
+	input_unregister_device(priv->idev);
+	kfree(priv);
+
+	return 0;
+}
+
+static struct platform_driver mc13783_ts_driver = {
+	.remove		= mc13783_ts_remove,
+	.driver		= {
+		.name	= MC13783_TS_NAME,
+	},
+};
+
+module_platform_driver_probe(mc13783_ts_driver, mc13783_ts_probe);
+
+MODULE_DESCRIPTION("MC13783 input touchscreen driver");
+MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:" MC13783_TS_NAME);
diff --git a/drivers/input/touchscreen/mcs5000_ts.c b/drivers/input/touchscreen/mcs5000_ts.c
new file mode 100644
index 0000000..8b47e1f
--- /dev/null
+++ b/drivers/input/touchscreen/mcs5000_ts.c
@@ -0,0 +1,294 @@
+/*
+ * mcs5000_ts.c - Touchscreen driver for MELFAS MCS-5000 controller
+ *
+ * Copyright (C) 2009 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Based on wm97xx-core.c
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mcs.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+
+/* Registers */
+#define MCS5000_TS_STATUS		0x00
+#define STATUS_OFFSET			0
+#define STATUS_NO			(0 << STATUS_OFFSET)
+#define STATUS_INIT			(1 << STATUS_OFFSET)
+#define STATUS_SENSING			(2 << STATUS_OFFSET)
+#define STATUS_COORD			(3 << STATUS_OFFSET)
+#define STATUS_GESTURE			(4 << STATUS_OFFSET)
+#define ERROR_OFFSET			4
+#define ERROR_NO			(0 << ERROR_OFFSET)
+#define ERROR_POWER_ON_RESET		(1 << ERROR_OFFSET)
+#define ERROR_INT_RESET			(2 << ERROR_OFFSET)
+#define ERROR_EXT_RESET			(3 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_ADDRESS	(8 << ERROR_OFFSET)
+#define ERROR_INVALID_REG_VALUE		(9 << ERROR_OFFSET)
+
+#define MCS5000_TS_OP_MODE		0x01
+#define RESET_OFFSET			0
+#define RESET_NO			(0 << RESET_OFFSET)
+#define RESET_EXT_SOFT			(1 << RESET_OFFSET)
+#define OP_MODE_OFFSET			1
+#define OP_MODE_SLEEP			(0 << OP_MODE_OFFSET)
+#define OP_MODE_ACTIVE			(1 << OP_MODE_OFFSET)
+#define GESTURE_OFFSET			4
+#define GESTURE_DISABLE			(0 << GESTURE_OFFSET)
+#define GESTURE_ENABLE			(1 << GESTURE_OFFSET)
+#define PROXIMITY_OFFSET		5
+#define PROXIMITY_DISABLE		(0 << PROXIMITY_OFFSET)
+#define PROXIMITY_ENABLE		(1 << PROXIMITY_OFFSET)
+#define SCAN_MODE_OFFSET		6
+#define SCAN_MODE_INTERRUPT		(0 << SCAN_MODE_OFFSET)
+#define SCAN_MODE_POLLING		(1 << SCAN_MODE_OFFSET)
+#define REPORT_RATE_OFFSET		7
+#define REPORT_RATE_40			(0 << REPORT_RATE_OFFSET)
+#define REPORT_RATE_80			(1 << REPORT_RATE_OFFSET)
+
+#define MCS5000_TS_SENS_CTL		0x02
+#define MCS5000_TS_FILTER_CTL		0x03
+#define PRI_FILTER_OFFSET		0
+#define SEC_FILTER_OFFSET		4
+
+#define MCS5000_TS_X_SIZE_UPPER		0x08
+#define MCS5000_TS_X_SIZE_LOWER		0x09
+#define MCS5000_TS_Y_SIZE_UPPER		0x0A
+#define MCS5000_TS_Y_SIZE_LOWER		0x0B
+
+#define MCS5000_TS_INPUT_INFO		0x10
+#define INPUT_TYPE_OFFSET		0
+#define INPUT_TYPE_NONTOUCH		(0 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_SINGLE		(1 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_DUAL			(2 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PALM			(3 << INPUT_TYPE_OFFSET)
+#define INPUT_TYPE_PROXIMITY		(7 << INPUT_TYPE_OFFSET)
+#define GESTURE_CODE_OFFSET		3
+#define GESTURE_CODE_NO			(0 << GESTURE_CODE_OFFSET)
+
+#define MCS5000_TS_X_POS_UPPER		0x11
+#define MCS5000_TS_X_POS_LOWER		0x12
+#define MCS5000_TS_Y_POS_UPPER		0x13
+#define MCS5000_TS_Y_POS_LOWER		0x14
+#define MCS5000_TS_Z_POS		0x15
+#define MCS5000_TS_WIDTH		0x16
+#define MCS5000_TS_GESTURE_VAL		0x17
+#define MCS5000_TS_MODULE_REV		0x20
+#define MCS5000_TS_FIRMWARE_VER		0x21
+
+/* Touchscreen absolute values */
+#define MCS5000_MAX_XC			0x3ff
+#define MCS5000_MAX_YC			0x3ff
+
+enum mcs5000_ts_read_offset {
+	READ_INPUT_INFO,
+	READ_X_POS_UPPER,
+	READ_X_POS_LOWER,
+	READ_Y_POS_UPPER,
+	READ_Y_POS_LOWER,
+	READ_BLOCK_SIZE,
+};
+
+/* Each client has this additional data */
+struct mcs5000_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	const struct mcs_platform_data *platform_data;
+};
+
+static irqreturn_t mcs5000_ts_interrupt(int irq, void *dev_id)
+{
+	struct mcs5000_ts_data *data = dev_id;
+	struct i2c_client *client = data->client;
+	u8 buffer[READ_BLOCK_SIZE];
+	int err;
+	int x;
+	int y;
+
+	err = i2c_smbus_read_i2c_block_data(client, MCS5000_TS_INPUT_INFO,
+			READ_BLOCK_SIZE, buffer);
+	if (err < 0) {
+		dev_err(&client->dev, "%s, err[%d]\n", __func__, err);
+		goto out;
+	}
+
+	switch (buffer[READ_INPUT_INFO]) {
+	case INPUT_TYPE_NONTOUCH:
+		input_report_key(data->input_dev, BTN_TOUCH, 0);
+		input_sync(data->input_dev);
+		break;
+
+	case INPUT_TYPE_SINGLE:
+		x = (buffer[READ_X_POS_UPPER] << 8) | buffer[READ_X_POS_LOWER];
+		y = (buffer[READ_Y_POS_UPPER] << 8) | buffer[READ_Y_POS_LOWER];
+
+		input_report_key(data->input_dev, BTN_TOUCH, 1);
+		input_report_abs(data->input_dev, ABS_X, x);
+		input_report_abs(data->input_dev, ABS_Y, y);
+		input_sync(data->input_dev);
+		break;
+
+	case INPUT_TYPE_DUAL:
+		/* TODO */
+		break;
+
+	case INPUT_TYPE_PALM:
+		/* TODO */
+		break;
+
+	case INPUT_TYPE_PROXIMITY:
+		/* TODO */
+		break;
+
+	default:
+		dev_err(&client->dev, "Unknown ts input type %d\n",
+				buffer[READ_INPUT_INFO]);
+		break;
+	}
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static void mcs5000_ts_phys_init(struct mcs5000_ts_data *data,
+				 const struct mcs_platform_data *platform_data)
+{
+	struct i2c_client *client = data->client;
+
+	/* Touch reset & sleep mode */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE,
+			RESET_EXT_SOFT | OP_MODE_SLEEP);
+
+	/* Touch size */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_UPPER,
+			platform_data->x_size >> 8);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_X_SIZE_LOWER,
+			platform_data->x_size & 0xff);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_UPPER,
+			platform_data->y_size >> 8);
+	i2c_smbus_write_byte_data(client, MCS5000_TS_Y_SIZE_LOWER,
+			platform_data->y_size & 0xff);
+
+	/* Touch active mode & 80 report rate */
+	i2c_smbus_write_byte_data(data->client, MCS5000_TS_OP_MODE,
+			OP_MODE_ACTIVE | REPORT_RATE_80);
+}
+
+static int mcs5000_ts_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	const struct mcs_platform_data *pdata;
+	struct mcs5000_ts_data *data;
+	struct input_dev *input_dev;
+	int error;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (!pdata)
+		return -EINVAL;
+
+	data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
+	if (!data) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	data->client = client;
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev) {
+		dev_err(&client->dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "MELFAS MCS-5000 Touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_abs_params(input_dev, ABS_X, 0, MCS5000_MAX_XC, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MCS5000_MAX_YC, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+	data->input_dev = input_dev;
+
+	if (pdata->cfg_pin)
+		pdata->cfg_pin();
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, mcs5000_ts_interrupt,
+					  IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					  "mcs5000_ts", data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		return error;
+	}
+
+	error = input_register_device(data->input_dev);
+	if (error) {
+		dev_err(&client->dev, "Failed to register input device\n");
+		return error;
+	}
+
+	mcs5000_ts_phys_init(data, pdata);
+	i2c_set_clientdata(client, data);
+
+	return 0;
+}
+
+static int __maybe_unused mcs5000_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	/* Touch sleep mode */
+	i2c_smbus_write_byte_data(client, MCS5000_TS_OP_MODE, OP_MODE_SLEEP);
+
+	return 0;
+}
+
+static int __maybe_unused mcs5000_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mcs5000_ts_data *data = i2c_get_clientdata(client);
+	const struct mcs_platform_data *pdata = dev_get_platdata(dev);
+
+	mcs5000_ts_phys_init(data, pdata);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mcs5000_ts_pm, mcs5000_ts_suspend, mcs5000_ts_resume);
+
+static const struct i2c_device_id mcs5000_ts_id[] = {
+	{ "mcs5000_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mcs5000_ts_id);
+
+static struct i2c_driver mcs5000_ts_driver = {
+	.probe		= mcs5000_ts_probe,
+	.driver = {
+		.name = "mcs5000_ts",
+		.pm   = &mcs5000_ts_pm,
+	},
+	.id_table	= mcs5000_ts_id,
+};
+
+module_i2c_driver(mcs5000_ts_driver);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("Touchscreen driver for MELFAS MCS-5000 controller");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/migor_ts.c b/drivers/input/touchscreen/migor_ts.c
new file mode 100644
index 0000000..c038db9
--- /dev/null
+++ b/drivers/input/touchscreen/migor_ts.c
@@ -0,0 +1,249 @@
+/*
+ * Touch Screen driver for Renesas MIGO-R Platform
+ *
+ * Copyright (c) 2008 Magnus Damm
+ * Copyright (c) 2007 Ujjwal Pande <ujjwal@kenati.com>,
+ *  Kenati Technologies Pvt Ltd.
+ *
+ * This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU  General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ *  General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <asm/io.h>
+#include <linux/i2c.h>
+#include <linux/timer.h>
+
+#define EVENT_PENDOWN 1
+#define EVENT_REPEAT  2
+#define EVENT_PENUP   3
+
+struct migor_ts_priv {
+	struct i2c_client *client;
+	struct input_dev *input;
+	int irq;
+};
+
+static const u_int8_t migor_ts_ena_seq[17] = { 0x33, 0x22, 0x11,
+					       0x01, 0x06, 0x07, };
+static const u_int8_t migor_ts_dis_seq[17] = { };
+
+static irqreturn_t migor_ts_isr(int irq, void *dev_id)
+{
+	struct migor_ts_priv *priv = dev_id;
+	unsigned short xpos, ypos;
+	unsigned char event;
+	u_int8_t buf[16];
+
+	/*
+	 * The touch screen controller chip is hooked up to the CPU
+	 * using I2C and a single interrupt line. The interrupt line
+	 * is pulled low whenever someone taps the screen. To deassert
+	 * the interrupt line we need to acknowledge the interrupt by
+	 * communicating with the controller over the slow i2c bus.
+	 *
+	 * Since I2C bus controller may sleep we are using threaded
+	 * IRQ here.
+	 */
+
+	memset(buf, 0, sizeof(buf));
+
+	/* Set Index 0 */
+	buf[0] = 0;
+	if (i2c_master_send(priv->client, buf, 1) != 1) {
+		dev_err(&priv->client->dev, "Unable to write i2c index\n");
+		goto out;
+	}
+
+	/* Now do Page Read */
+	if (i2c_master_recv(priv->client, buf, sizeof(buf)) != sizeof(buf)) {
+		dev_err(&priv->client->dev, "Unable to read i2c page\n");
+		goto out;
+	}
+
+	ypos = ((buf[9] & 0x03) << 8 | buf[8]);
+	xpos = ((buf[11] & 0x03) << 8 | buf[10]);
+	event = buf[12];
+
+	switch (event) {
+	case EVENT_PENDOWN:
+	case EVENT_REPEAT:
+		input_report_key(priv->input, BTN_TOUCH, 1);
+		input_report_abs(priv->input, ABS_X, ypos); /*X-Y swap*/
+		input_report_abs(priv->input, ABS_Y, xpos);
+		input_sync(priv->input);
+		break;
+
+	case EVENT_PENUP:
+		input_report_key(priv->input, BTN_TOUCH, 0);
+		input_sync(priv->input);
+		break;
+	}
+
+ out:
+	return IRQ_HANDLED;
+}
+
+static int migor_ts_open(struct input_dev *dev)
+{
+	struct migor_ts_priv *priv = input_get_drvdata(dev);
+	struct i2c_client *client = priv->client;
+	int count;
+
+	/* enable controller */
+	count = i2c_master_send(client, migor_ts_ena_seq,
+				sizeof(migor_ts_ena_seq));
+	if (count != sizeof(migor_ts_ena_seq)) {
+		dev_err(&client->dev, "Unable to enable touchscreen.\n");
+		return -ENXIO;
+	}
+
+	return 0;
+}
+
+static void migor_ts_close(struct input_dev *dev)
+{
+	struct migor_ts_priv *priv = input_get_drvdata(dev);
+	struct i2c_client *client = priv->client;
+
+	disable_irq(priv->irq);
+
+	/* disable controller */
+	i2c_master_send(client, migor_ts_dis_seq, sizeof(migor_ts_dis_seq));
+
+	enable_irq(priv->irq);
+}
+
+static int migor_ts_probe(struct i2c_client *client,
+			  const struct i2c_device_id *idp)
+{
+	struct migor_ts_priv *priv;
+	struct input_dev *input;
+	int error;
+
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!priv || !input) {
+		dev_err(&client->dev, "failed to allocate memory\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	priv->client = client;
+	priv->input = input;
+	priv->irq = client->irq;
+
+	input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+
+	__set_bit(BTN_TOUCH, input->keybit);
+
+	input_set_abs_params(input, ABS_X, 95, 955, 0, 0);
+	input_set_abs_params(input, ABS_Y, 85, 935, 0, 0);
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+
+	input->open = migor_ts_open;
+	input->close = migor_ts_close;
+
+	input_set_drvdata(input, priv);
+
+	error = request_threaded_irq(priv->irq, NULL, migor_ts_isr,
+                                     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+                                     client->name, priv);
+	if (error) {
+		dev_err(&client->dev, "Unable to request touchscreen IRQ.\n");
+		goto err_free_mem;
+	}
+
+	error = input_register_device(input);
+	if (error)
+		goto err_free_irq;
+
+	i2c_set_clientdata(client, priv);
+	device_init_wakeup(&client->dev, 1);
+
+	return 0;
+
+ err_free_irq:
+	free_irq(priv->irq, priv);
+ err_free_mem:
+	input_free_device(input);
+	kfree(priv);
+	return error;
+}
+
+static int migor_ts_remove(struct i2c_client *client)
+{
+	struct migor_ts_priv *priv = i2c_get_clientdata(client);
+
+	free_irq(priv->irq, priv);
+	input_unregister_device(priv->input);
+	kfree(priv);
+
+	dev_set_drvdata(&client->dev, NULL);
+
+	return 0;
+}
+
+static int migor_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct migor_ts_priv *priv = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev))
+		enable_irq_wake(priv->irq);
+
+	return 0;
+}
+
+static int migor_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct migor_ts_priv *priv = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev))
+		disable_irq_wake(priv->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(migor_ts_pm, migor_ts_suspend, migor_ts_resume);
+
+static const struct i2c_device_id migor_ts_id[] = {
+	{ "migor_ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, migor_ts);
+
+static struct i2c_driver migor_ts_driver = {
+	.driver = {
+		.name = "migor_ts",
+		.pm = &migor_ts_pm,
+	},
+	.probe = migor_ts_probe,
+	.remove = migor_ts_remove,
+	.id_table = migor_ts_id,
+};
+
+module_i2c_driver(migor_ts_driver);
+
+MODULE_DESCRIPTION("MigoR Touchscreen driver");
+MODULE_AUTHOR("Magnus Damm <damm@opensource.se>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/mk712.c b/drivers/input/touchscreen/mk712.c
new file mode 100644
index 0000000..36e57de
--- /dev/null
+++ b/drivers/input/touchscreen/mk712.c
@@ -0,0 +1,219 @@
+/*
+ * ICS MK712 touchscreen controller driver
+ *
+ * Copyright (c) 1999-2002 Transmeta Corporation
+ * Copyright (c) 2005 Rick Koch <n1gp@hotmail.com>
+ * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * This driver supports the ICS MicroClock MK712 TouchScreen controller,
+ * found in Gateway AOL Connected Touchpad computers.
+ *
+ * Documentation for ICS MK712 can be found at:
+ *	http://www.idt.com/products/getDoc.cfm?docID=18713923
+ */
+
+/*
+ * 1999-12-18: original version, Daniel Quinlan
+ * 1999-12-19: added anti-jitter code, report pen-up events, fixed mk712_poll
+ *             to use queue_empty, Nathan Laredo
+ * 1999-12-20: improved random point rejection, Nathan Laredo
+ * 2000-01-05: checked in new anti-jitter code, changed mouse protocol, fixed
+ *             queue code, added module options, other fixes, Daniel Quinlan
+ * 2002-03-15: Clean up for kernel merge <alan@redhat.com>
+ *             Fixed multi open race, fixed memory checks, fixed resource
+ *             allocation, fixed close/powerdown bug, switched to new init
+ * 2005-01-18: Ported to 2.6 from 2.4.28, Rick Koch
+ * 2005-02-05: Rewritten for the input layer, Vojtech Pavlik
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <asm/io.h>
+
+MODULE_AUTHOR("Daniel Quinlan <quinlan@pathname.com>, Vojtech Pavlik <vojtech@suse.cz>");
+MODULE_DESCRIPTION("ICS MicroClock MK712 TouchScreen driver");
+MODULE_LICENSE("GPL");
+
+static unsigned int mk712_io = 0x260;	/* Also 0x200, 0x208, 0x300 */
+module_param_named(io, mk712_io, uint, 0);
+MODULE_PARM_DESC(io, "I/O base address of MK712 touchscreen controller");
+
+static unsigned int mk712_irq = 10;	/* Also 12, 14, 15 */
+module_param_named(irq, mk712_irq, uint, 0);
+MODULE_PARM_DESC(irq, "IRQ of MK712 touchscreen controller");
+
+/* eight 8-bit registers */
+#define MK712_STATUS		0
+#define MK712_X			2
+#define MK712_Y			4
+#define MK712_CONTROL		6
+#define MK712_RATE		7
+
+/* status */
+#define	MK712_STATUS_TOUCH			0x10
+#define	MK712_CONVERSION_COMPLETE		0x80
+
+/* control */
+#define MK712_ENABLE_INT			0x01
+#define MK712_INT_ON_CONVERSION_COMPLETE	0x02
+#define MK712_INT_ON_CHANGE_IN_TOUCH_STATUS	0x04
+#define MK712_ENABLE_PERIODIC_CONVERSIONS	0x10
+#define MK712_READ_ONE_POINT			0x20
+#define MK712_POWERUP				0x40
+
+static struct input_dev *mk712_dev;
+static DEFINE_SPINLOCK(mk712_lock);
+
+static irqreturn_t mk712_interrupt(int irq, void *dev_id)
+{
+	unsigned char status;
+	static int debounce = 1;
+	static unsigned short last_x;
+	static unsigned short last_y;
+
+	spin_lock(&mk712_lock);
+
+	status = inb(mk712_io + MK712_STATUS);
+
+	if (~status & MK712_CONVERSION_COMPLETE) {
+		debounce = 1;
+		goto end;
+	}
+
+	if (~status & MK712_STATUS_TOUCH) {
+		debounce = 1;
+		input_report_key(mk712_dev, BTN_TOUCH, 0);
+		goto end;
+	}
+
+	if (debounce) {
+		debounce = 0;
+		goto end;
+	}
+
+	input_report_key(mk712_dev, BTN_TOUCH, 1);
+	input_report_abs(mk712_dev, ABS_X, last_x);
+	input_report_abs(mk712_dev, ABS_Y, last_y);
+
+ end:
+	last_x = inw(mk712_io + MK712_X) & 0x0fff;
+	last_y = inw(mk712_io + MK712_Y) & 0x0fff;
+	input_sync(mk712_dev);
+	spin_unlock(&mk712_lock);
+	return IRQ_HANDLED;
+}
+
+static int mk712_open(struct input_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mk712_lock, flags);
+
+	outb(0, mk712_io + MK712_CONTROL); /* Reset */
+
+	outb(MK712_ENABLE_INT | MK712_INT_ON_CONVERSION_COMPLETE |
+		MK712_INT_ON_CHANGE_IN_TOUCH_STATUS |
+		MK712_ENABLE_PERIODIC_CONVERSIONS |
+		MK712_POWERUP, mk712_io + MK712_CONTROL);
+
+	outb(10, mk712_io + MK712_RATE); /* 187 points per second */
+
+	spin_unlock_irqrestore(&mk712_lock, flags);
+
+	return 0;
+}
+
+static void mk712_close(struct input_dev *dev)
+{
+	unsigned long flags;
+
+	spin_lock_irqsave(&mk712_lock, flags);
+
+	outb(0, mk712_io + MK712_CONTROL);
+
+	spin_unlock_irqrestore(&mk712_lock, flags);
+}
+
+static int __init mk712_init(void)
+{
+	int err;
+
+	if (!request_region(mk712_io, 8, "mk712")) {
+		printk(KERN_WARNING "mk712: unable to get IO region\n");
+		return -ENODEV;
+	}
+
+	outb(0, mk712_io + MK712_CONTROL);
+
+	if ((inw(mk712_io + MK712_X) & 0xf000) ||	/* Sanity check */
+	    (inw(mk712_io + MK712_Y) & 0xf000) ||
+	    (inw(mk712_io + MK712_STATUS) & 0xf333)) {
+		printk(KERN_WARNING "mk712: device not present\n");
+		err = -ENODEV;
+		goto fail1;
+	}
+
+	mk712_dev = input_allocate_device();
+	if (!mk712_dev) {
+		printk(KERN_ERR "mk712: not enough memory\n");
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	mk712_dev->name = "ICS MicroClock MK712 TouchScreen";
+	mk712_dev->phys = "isa0260/input0";
+	mk712_dev->id.bustype = BUS_ISA;
+	mk712_dev->id.vendor  = 0x0005;
+	mk712_dev->id.product = 0x0001;
+	mk712_dev->id.version = 0x0100;
+
+	mk712_dev->open    = mk712_open;
+	mk712_dev->close   = mk712_close;
+
+	mk712_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	mk712_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(mk712_dev, ABS_X, 0, 0xfff, 88, 0);
+	input_set_abs_params(mk712_dev, ABS_Y, 0, 0xfff, 88, 0);
+
+	if (request_irq(mk712_irq, mk712_interrupt, 0, "mk712", mk712_dev)) {
+		printk(KERN_WARNING "mk712: unable to get IRQ\n");
+		err = -EBUSY;
+		goto fail1;
+	}
+
+	err = input_register_device(mk712_dev);
+	if (err)
+		goto fail2;
+
+	return 0;
+
+ fail2:	free_irq(mk712_irq, mk712_dev);
+ fail1:	input_free_device(mk712_dev);
+	release_region(mk712_io, 8);
+	return err;
+}
+
+static void __exit mk712_exit(void)
+{
+	input_unregister_device(mk712_dev);
+	free_irq(mk712_irq, mk712_dev);
+	release_region(mk712_io, 8);
+}
+
+module_init(mk712_init);
+module_exit(mk712_exit);
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
new file mode 100644
index 0000000..1fafc9f
--- /dev/null
+++ b/drivers/input/touchscreen/mms114.c
@@ -0,0 +1,593 @@
+/*
+ * Copyright (C) 2012 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mms114.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Write only registers */
+#define MMS114_MODE_CONTROL		0x01
+#define MMS114_OPERATION_MODE_MASK	0xE
+#define MMS114_ACTIVE			(1 << 1)
+
+#define MMS114_XY_RESOLUTION_H		0x02
+#define MMS114_X_RESOLUTION		0x03
+#define MMS114_Y_RESOLUTION		0x04
+#define MMS114_CONTACT_THRESHOLD	0x05
+#define MMS114_MOVING_THRESHOLD		0x06
+
+/* Read only registers */
+#define MMS114_PACKET_SIZE		0x0F
+#define MMS114_INFOMATION		0x10
+#define MMS114_TSP_REV			0xF0
+
+/* Minimum delay time is 50us between stop and start signal of i2c */
+#define MMS114_I2C_DELAY		50
+
+/* 200ms needs after power on */
+#define MMS114_POWERON_DELAY		200
+
+/* Touchscreen absolute values */
+#define MMS114_MAX_AREA			0xff
+
+#define MMS114_MAX_TOUCH		10
+#define MMS114_PACKET_NUM		8
+
+/* Touch type */
+#define MMS114_TYPE_NONE		0
+#define MMS114_TYPE_TOUCHSCREEN		1
+#define MMS114_TYPE_TOUCHKEY		2
+
+struct mms114_data {
+	struct i2c_client	*client;
+	struct input_dev	*input_dev;
+	struct regulator	*core_reg;
+	struct regulator	*io_reg;
+	const struct mms114_platform_data	*pdata;
+
+	/* Use cache data for mode control register(write only) */
+	u8			cache_mode_control;
+};
+
+struct mms114_touch {
+	u8 id:4, reserved_bit4:1, type:2, pressed:1;
+	u8 x_hi:4, y_hi:4;
+	u8 x_lo;
+	u8 y_lo;
+	u8 width;
+	u8 strength;
+	u8 reserved[2];
+} __packed;
+
+static int __mms114_read_reg(struct mms114_data *data, unsigned int reg,
+			     unsigned int len, u8 *val)
+{
+	struct i2c_client *client = data->client;
+	struct i2c_msg xfer[2];
+	u8 buf = reg & 0xff;
+	int error;
+
+	if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL)
+		BUG();
+
+	/* Write register: use repeated start */
+	xfer[0].addr = client->addr;
+	xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART;
+	xfer[0].len = 1;
+	xfer[0].buf = &buf;
+
+	/* Read data */
+	xfer[1].addr = client->addr;
+	xfer[1].flags = I2C_M_RD;
+	xfer[1].len = len;
+	xfer[1].buf = val;
+
+	error = i2c_transfer(client->adapter, xfer, 2);
+	if (error != 2) {
+		dev_err(&client->dev,
+			"%s: i2c transfer failed (%d)\n", __func__, error);
+		return error < 0 ? error : -EIO;
+	}
+	udelay(MMS114_I2C_DELAY);
+
+	return 0;
+}
+
+static int mms114_read_reg(struct mms114_data *data, unsigned int reg)
+{
+	u8 val;
+	int error;
+
+	if (reg == MMS114_MODE_CONTROL)
+		return data->cache_mode_control;
+
+	error = __mms114_read_reg(data, reg, 1, &val);
+	return error < 0 ? error : val;
+}
+
+static int mms114_write_reg(struct mms114_data *data, unsigned int reg,
+			    unsigned int val)
+{
+	struct i2c_client *client = data->client;
+	u8 buf[2];
+	int error;
+
+	buf[0] = reg & 0xff;
+	buf[1] = val & 0xff;
+
+	error = i2c_master_send(client, buf, 2);
+	if (error != 2) {
+		dev_err(&client->dev,
+			"%s: i2c send failed (%d)\n", __func__, error);
+		return error < 0 ? error : -EIO;
+	}
+	udelay(MMS114_I2C_DELAY);
+
+	if (reg == MMS114_MODE_CONTROL)
+		data->cache_mode_control = val;
+
+	return 0;
+}
+
+static void mms114_process_mt(struct mms114_data *data, struct mms114_touch *touch)
+{
+	const struct mms114_platform_data *pdata = data->pdata;
+	struct i2c_client *client = data->client;
+	struct input_dev *input_dev = data->input_dev;
+	unsigned int id;
+	unsigned int x;
+	unsigned int y;
+
+	if (touch->id > MMS114_MAX_TOUCH) {
+		dev_err(&client->dev, "Wrong touch id (%d)\n", touch->id);
+		return;
+	}
+
+	if (touch->type != MMS114_TYPE_TOUCHSCREEN) {
+		dev_err(&client->dev, "Wrong touch type (%d)\n", touch->type);
+		return;
+	}
+
+	id = touch->id - 1;
+	x = touch->x_lo | touch->x_hi << 8;
+	y = touch->y_lo | touch->y_hi << 8;
+	if (x > pdata->x_size || y > pdata->y_size) {
+		dev_dbg(&client->dev,
+			"Wrong touch coordinates (%d, %d)\n", x, y);
+		return;
+	}
+
+	if (pdata->x_invert)
+		x = pdata->x_size - x;
+	if (pdata->y_invert)
+		y = pdata->y_size - y;
+
+	dev_dbg(&client->dev,
+		"id: %d, type: %d, pressed: %d, x: %d, y: %d, width: %d, strength: %d\n",
+		id, touch->type, touch->pressed,
+		x, y, touch->width, touch->strength);
+
+	input_mt_slot(input_dev, id);
+	input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, touch->pressed);
+
+	if (touch->pressed) {
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, touch->width);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
+		input_report_abs(input_dev, ABS_MT_PRESSURE, touch->strength);
+	}
+}
+
+static irqreturn_t mms114_interrupt(int irq, void *dev_id)
+{
+	struct mms114_data *data = dev_id;
+	struct input_dev *input_dev = data->input_dev;
+	struct mms114_touch touch[MMS114_MAX_TOUCH];
+	int packet_size;
+	int touch_size;
+	int index;
+	int error;
+
+	mutex_lock(&input_dev->mutex);
+	if (!input_dev->users) {
+		mutex_unlock(&input_dev->mutex);
+		goto out;
+	}
+	mutex_unlock(&input_dev->mutex);
+
+	packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
+	if (packet_size <= 0)
+		goto out;
+
+	touch_size = packet_size / MMS114_PACKET_NUM;
+
+	error = __mms114_read_reg(data, MMS114_INFOMATION, packet_size,
+			(u8 *)touch);
+	if (error < 0)
+		goto out;
+
+	for (index = 0; index < touch_size; index++)
+		mms114_process_mt(data, touch + index);
+
+	input_mt_report_pointer_emulation(data->input_dev, true);
+	input_sync(data->input_dev);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int mms114_set_active(struct mms114_data *data, bool active)
+{
+	int val;
+
+	val = mms114_read_reg(data, MMS114_MODE_CONTROL);
+	if (val < 0)
+		return val;
+
+	val &= ~MMS114_OPERATION_MODE_MASK;
+
+	/* If active is false, sleep mode */
+	if (active)
+		val |= MMS114_ACTIVE;
+
+	return mms114_write_reg(data, MMS114_MODE_CONTROL, val);
+}
+
+static int mms114_get_version(struct mms114_data *data)
+{
+	struct device *dev = &data->client->dev;
+	u8 buf[6];
+	int error;
+
+	error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf);
+	if (error < 0)
+		return error;
+
+	dev_info(dev, "TSP Rev: 0x%x, HW Rev: 0x%x, Firmware Ver: 0x%x\n",
+		 buf[0], buf[1], buf[3]);
+
+	return 0;
+}
+
+static int mms114_setup_regs(struct mms114_data *data)
+{
+	const struct mms114_platform_data *pdata = data->pdata;
+	int val;
+	int error;
+
+	error = mms114_get_version(data);
+	if (error < 0)
+		return error;
+
+	error = mms114_set_active(data, true);
+	if (error < 0)
+		return error;
+
+	val = (pdata->x_size >> 8) & 0xf;
+	val |= ((pdata->y_size >> 8) & 0xf) << 4;
+	error = mms114_write_reg(data, MMS114_XY_RESOLUTION_H, val);
+	if (error < 0)
+		return error;
+
+	val = pdata->x_size & 0xff;
+	error = mms114_write_reg(data, MMS114_X_RESOLUTION, val);
+	if (error < 0)
+		return error;
+
+	val = pdata->y_size & 0xff;
+	error = mms114_write_reg(data, MMS114_Y_RESOLUTION, val);
+	if (error < 0)
+		return error;
+
+	if (pdata->contact_threshold) {
+		error = mms114_write_reg(data, MMS114_CONTACT_THRESHOLD,
+				pdata->contact_threshold);
+		if (error < 0)
+			return error;
+	}
+
+	if (pdata->moving_threshold) {
+		error = mms114_write_reg(data, MMS114_MOVING_THRESHOLD,
+				pdata->moving_threshold);
+		if (error < 0)
+			return error;
+	}
+
+	return 0;
+}
+
+static int mms114_start(struct mms114_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+
+	error = regulator_enable(data->core_reg);
+	if (error) {
+		dev_err(&client->dev, "Failed to enable avdd: %d\n", error);
+		return error;
+	}
+
+	error = regulator_enable(data->io_reg);
+	if (error) {
+		dev_err(&client->dev, "Failed to enable vdd: %d\n", error);
+		regulator_disable(data->core_reg);
+		return error;
+	}
+
+	mdelay(MMS114_POWERON_DELAY);
+
+	error = mms114_setup_regs(data);
+	if (error < 0) {
+		regulator_disable(data->io_reg);
+		regulator_disable(data->core_reg);
+		return error;
+	}
+
+	if (data->pdata->cfg_pin)
+		data->pdata->cfg_pin(true);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void mms114_stop(struct mms114_data *data)
+{
+	struct i2c_client *client = data->client;
+	int error;
+
+	disable_irq(client->irq);
+
+	if (data->pdata->cfg_pin)
+		data->pdata->cfg_pin(false);
+
+	error = regulator_disable(data->io_reg);
+	if (error)
+		dev_warn(&client->dev, "Failed to disable vdd: %d\n", error);
+
+	error = regulator_disable(data->core_reg);
+	if (error)
+		dev_warn(&client->dev, "Failed to disable avdd: %d\n", error);
+}
+
+static int mms114_input_open(struct input_dev *dev)
+{
+	struct mms114_data *data = input_get_drvdata(dev);
+
+	return mms114_start(data);
+}
+
+static void mms114_input_close(struct input_dev *dev)
+{
+	struct mms114_data *data = input_get_drvdata(dev);
+
+	mms114_stop(data);
+}
+
+#ifdef CONFIG_OF
+static struct mms114_platform_data *mms114_parse_dt(struct device *dev)
+{
+	struct mms114_platform_data *pdata;
+	struct device_node *np = dev->of_node;
+
+	if (!np)
+		return NULL;
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "failed to allocate platform data\n");
+		return NULL;
+	}
+
+	if (of_property_read_u32(np, "x-size", &pdata->x_size)) {
+		dev_err(dev, "failed to get x-size property\n");
+		return NULL;
+	}
+
+	if (of_property_read_u32(np, "y-size", &pdata->y_size)) {
+		dev_err(dev, "failed to get y-size property\n");
+		return NULL;
+	}
+
+	of_property_read_u32(np, "contact-threshold",
+				&pdata->contact_threshold);
+	of_property_read_u32(np, "moving-threshold",
+				&pdata->moving_threshold);
+
+	if (of_find_property(np, "x-invert", NULL))
+		pdata->x_invert = true;
+	if (of_find_property(np, "y-invert", NULL))
+		pdata->y_invert = true;
+
+	return pdata;
+}
+#else
+static inline struct mms114_platform_data *mms114_parse_dt(struct device *dev)
+{
+	return NULL;
+}
+#endif
+
+static int mms114_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	const struct mms114_platform_data *pdata;
+	struct mms114_data *data;
+	struct input_dev *input_dev;
+	int error;
+
+	pdata = dev_get_platdata(&client->dev);
+	if (!pdata)
+		pdata = mms114_parse_dt(&client->dev);
+
+	if (!pdata) {
+		dev_err(&client->dev, "Need platform data\n");
+		return -EINVAL;
+	}
+
+	if (!i2c_check_functionality(client->adapter,
+				I2C_FUNC_PROTOCOL_MANGLING)) {
+		dev_err(&client->dev,
+			"Need i2c bus that supports protocol mangling\n");
+		return -ENODEV;
+	}
+
+	data = devm_kzalloc(&client->dev, sizeof(struct mms114_data),
+			    GFP_KERNEL);
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!data || !input_dev) {
+		dev_err(&client->dev, "Failed to allocate memory\n");
+		return -ENOMEM;
+	}
+
+	data->client = client;
+	data->input_dev = input_dev;
+	data->pdata = pdata;
+
+	input_dev->name = "MELFAS MMS114 Touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+	input_dev->open = mms114_input_open;
+	input_dev->close = mms114_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_abs_params(input_dev, ABS_X, 0, data->pdata->x_size, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, data->pdata->y_size, 0, 0);
+
+	/* For multi touch */
+	input_mt_init_slots(input_dev, MMS114_MAX_TOUCH, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, MMS114_MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, data->pdata->x_size, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, data->pdata->y_size, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
+
+	input_set_drvdata(input_dev, data);
+	i2c_set_clientdata(client, data);
+
+	data->core_reg = devm_regulator_get(&client->dev, "avdd");
+	if (IS_ERR(data->core_reg)) {
+		error = PTR_ERR(data->core_reg);
+		dev_err(&client->dev,
+			"Unable to get the Core regulator (%d)\n", error);
+		return error;
+	}
+
+	data->io_reg = devm_regulator_get(&client->dev, "vdd");
+	if (IS_ERR(data->io_reg)) {
+		error = PTR_ERR(data->io_reg);
+		dev_err(&client->dev,
+			"Unable to get the IO regulator (%d)\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&client->dev, client->irq, NULL,
+			mms114_interrupt, IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+			dev_name(&client->dev), data);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		return error;
+	}
+	disable_irq(client->irq);
+
+	error = input_register_device(data->input_dev);
+	if (error) {
+		dev_err(&client->dev, "Failed to register input device\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused mms114_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mms114_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+	int id;
+
+	/* Release all touch */
+	for (id = 0; id < MMS114_MAX_TOUCH; id++) {
+		input_mt_slot(input_dev, id);
+		input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, false);
+	}
+
+	input_mt_report_pointer_emulation(input_dev, true);
+	input_sync(input_dev);
+
+	mutex_lock(&input_dev->mutex);
+	if (input_dev->users)
+		mms114_stop(data);
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused mms114_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct mms114_data *data = i2c_get_clientdata(client);
+	struct input_dev *input_dev = data->input_dev;
+	int error;
+
+	mutex_lock(&input_dev->mutex);
+	if (input_dev->users) {
+		error = mms114_start(data);
+		if (error < 0) {
+			mutex_unlock(&input_dev->mutex);
+			return error;
+		}
+	}
+	mutex_unlock(&input_dev->mutex);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(mms114_pm_ops, mms114_suspend, mms114_resume);
+
+static const struct i2c_device_id mms114_id[] = {
+	{ "mms114", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, mms114_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id mms114_dt_match[] = {
+	{ .compatible = "melfas,mms114" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, mms114_dt_match);
+#endif
+
+static struct i2c_driver mms114_driver = {
+	.driver = {
+		.name	= "mms114",
+		.pm	= &mms114_pm_ops,
+		.of_match_table = of_match_ptr(mms114_dt_match),
+	},
+	.probe		= mms114_probe,
+	.id_table	= mms114_id,
+};
+
+module_i2c_driver(mms114_driver);
+
+/* Module information */
+MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
+MODULE_DESCRIPTION("MELFAS mms114 Touchscreen driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/mtouch.c b/drivers/input/touchscreen/mtouch.c
new file mode 100644
index 0000000..9b5552a
--- /dev/null
+++ b/drivers/input/touchscreen/mtouch.c
@@ -0,0 +1,204 @@
+/*
+ * MicroTouch (3M) serial touchscreen driver
+ *
+ * Copyright (c) 2004 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+/*
+ * 2005/02/19 Dan Streetman <ddstreet@ieee.org>
+ *   Copied elo.c and edited for MicroTouch protocol
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"MicroTouch serial touchscreen driver"
+
+MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define MTOUCH_FORMAT_TABLET_STATUS_BIT 0x80
+#define MTOUCH_FORMAT_TABLET_TOUCH_BIT 0x40
+#define MTOUCH_FORMAT_TABLET_LENGTH 5
+#define MTOUCH_RESPONSE_BEGIN_BYTE 0x01
+#define MTOUCH_RESPONSE_END_BYTE 0x0d
+
+/* todo: check specs for max length of all responses */
+#define MTOUCH_MAX_LENGTH 16
+
+#define MTOUCH_MIN_XC 0
+#define MTOUCH_MAX_XC 0x3fff
+#define MTOUCH_MIN_YC 0
+#define MTOUCH_MAX_YC 0x3fff
+
+#define MTOUCH_GET_XC(data) (((data[2])<<7) | data[1])
+#define MTOUCH_GET_YC(data) (((data[4])<<7) | data[3])
+#define MTOUCH_GET_TOUCHED(data) (MTOUCH_FORMAT_TABLET_TOUCH_BIT & data[0])
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct mtouch {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[MTOUCH_MAX_LENGTH];
+	char phys[32];
+};
+
+static void mtouch_process_format_tablet(struct mtouch *mtouch)
+{
+	struct input_dev *dev = mtouch->dev;
+
+	if (MTOUCH_FORMAT_TABLET_LENGTH == ++mtouch->idx) {
+		input_report_abs(dev, ABS_X, MTOUCH_GET_XC(mtouch->data));
+		input_report_abs(dev, ABS_Y, MTOUCH_MAX_YC - MTOUCH_GET_YC(mtouch->data));
+		input_report_key(dev, BTN_TOUCH, MTOUCH_GET_TOUCHED(mtouch->data));
+		input_sync(dev);
+
+		mtouch->idx = 0;
+	}
+}
+
+static void mtouch_process_response(struct mtouch *mtouch)
+{
+	if (MTOUCH_RESPONSE_END_BYTE == mtouch->data[mtouch->idx++]) {
+		/* FIXME - process response */
+		mtouch->idx = 0;
+	} else if (MTOUCH_MAX_LENGTH == mtouch->idx) {
+		printk(KERN_ERR "mtouch.c: too many response bytes\n");
+		mtouch->idx = 0;
+	}
+}
+
+static irqreturn_t mtouch_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct mtouch* mtouch = serio_get_drvdata(serio);
+
+	mtouch->data[mtouch->idx] = data;
+
+	if (MTOUCH_FORMAT_TABLET_STATUS_BIT & mtouch->data[0])
+		mtouch_process_format_tablet(mtouch);
+	else if (MTOUCH_RESPONSE_BEGIN_BYTE == mtouch->data[0])
+		mtouch_process_response(mtouch);
+	else
+		printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * mtouch_disconnect() is the opposite of mtouch_connect()
+ */
+
+static void mtouch_disconnect(struct serio *serio)
+{
+	struct mtouch* mtouch = serio_get_drvdata(serio);
+
+	input_get_device(mtouch->dev);
+	input_unregister_device(mtouch->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(mtouch->dev);
+	kfree(mtouch);
+}
+
+/*
+ * mtouch_connect() is the routine that is called when someone adds a
+ * new serio device that supports MicroTouch (Format Tablet) protocol and registers it as
+ * an input device.
+ */
+
+static int mtouch_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct mtouch *mtouch;
+	struct input_dev *input_dev;
+	int err;
+
+	mtouch = kzalloc(sizeof(struct mtouch), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!mtouch || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	mtouch->serio = serio;
+	mtouch->dev = input_dev;
+	snprintf(mtouch->phys, sizeof(mtouch->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "MicroTouch Serial TouchScreen";
+	input_dev->phys = mtouch->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_MICROTOUCH;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(mtouch->dev, ABS_X, MTOUCH_MIN_XC, MTOUCH_MAX_XC, 0, 0);
+	input_set_abs_params(mtouch->dev, ABS_Y, MTOUCH_MIN_YC, MTOUCH_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, mtouch);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(mtouch->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(mtouch);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id mtouch_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_MICROTOUCH,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, mtouch_serio_ids);
+
+static struct serio_driver mtouch_drv = {
+	.driver		= {
+		.name	= "mtouch",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= mtouch_serio_ids,
+	.interrupt	= mtouch_interrupt,
+	.connect	= mtouch_connect,
+	.disconnect	= mtouch_disconnect,
+};
+
+module_serio_driver(mtouch_drv);
diff --git a/drivers/input/touchscreen/of_touchscreen.c b/drivers/input/touchscreen/of_touchscreen.c
new file mode 100644
index 0000000..bb6f2fe
--- /dev/null
+++ b/drivers/input/touchscreen/of_touchscreen.c
@@ -0,0 +1,108 @@
+/*
+ *  Generic DT helper functions for touchscreen devices
+ *
+ *  Copyright (c) 2014 Sebastian Reichel <sre@kernel.org>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/property.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+
+static bool touchscreen_get_prop_u32(struct device *dev,
+				     const char *property,
+				     unsigned int default_value,
+				     unsigned int *value)
+{
+	u32 val;
+	int error;
+
+	error = device_property_read_u32(dev, property, &val);
+	if (error) {
+		*value = default_value;
+		return false;
+	}
+
+	*value = val;
+	return true;
+}
+
+static void touchscreen_set_params(struct input_dev *dev,
+				   unsigned long axis,
+				   int max, int fuzz)
+{
+	struct input_absinfo *absinfo;
+
+	if (!test_bit(axis, dev->absbit)) {
+		dev_warn(&dev->dev,
+			 "DT specifies parameters but the axis %lu is not set up\n",
+			 axis);
+		return;
+	}
+
+	absinfo = &dev->absinfo[axis];
+	absinfo->maximum = max;
+	absinfo->fuzz = fuzz;
+}
+
+/**
+ * touchscreen_parse_properties - parse common touchscreen DT properties
+ * @input: input device that should be parsed
+ * @multitouch: specifies whether parsed properties should be applied to
+ *	single-touch or multi-touch axes
+ *
+ * This function parses common DT properties for touchscreens and setups the
+ * input device accordingly. The function keeps previously set up default
+ * values if no value is specified via DT.
+ */
+void touchscreen_parse_properties(struct input_dev *input, bool multitouch)
+{
+	struct device *dev = input->dev.parent;
+	unsigned int axis;
+	unsigned int maximum, fuzz;
+	bool data_present;
+
+	input_alloc_absinfo(input);
+	if (!input->absinfo)
+		return;
+
+	axis = multitouch ? ABS_MT_POSITION_X : ABS_X;
+	data_present = touchscreen_get_prop_u32(dev, "touchscreen-size-x",
+						input_abs_get_max(input,
+								  axis) + 1,
+						&maximum) |
+		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-x",
+						input_abs_get_fuzz(input, axis),
+						&fuzz);
+	if (data_present)
+		touchscreen_set_params(input, axis, maximum - 1, fuzz);
+
+	axis = multitouch ? ABS_MT_POSITION_Y : ABS_Y;
+	data_present = touchscreen_get_prop_u32(dev, "touchscreen-size-y",
+						input_abs_get_max(input,
+								  axis) + 1,
+						&maximum) |
+		       touchscreen_get_prop_u32(dev, "touchscreen-fuzz-y",
+						input_abs_get_fuzz(input, axis),
+						&fuzz);
+	if (data_present)
+		touchscreen_set_params(input, axis, maximum - 1, fuzz);
+
+	axis = multitouch ? ABS_MT_PRESSURE : ABS_PRESSURE;
+	data_present = touchscreen_get_prop_u32(dev,
+						"touchscreen-max-pressure",
+						input_abs_get_max(input, axis),
+						&maximum) |
+		       touchscreen_get_prop_u32(dev,
+						"touchscreen-fuzz-pressure",
+						input_abs_get_fuzz(input, axis),
+						&fuzz);
+	if (data_present)
+		touchscreen_set_params(input, axis, maximum, fuzz);
+}
+EXPORT_SYMBOL(touchscreen_parse_properties);
diff --git a/drivers/input/touchscreen/pcap_ts.c b/drivers/input/touchscreen/pcap_ts.c
new file mode 100644
index 0000000..23a354a
--- /dev/null
+++ b/drivers/input/touchscreen/pcap_ts.c
@@ -0,0 +1,258 @@
+/*
+ * Driver for Motorola PCAP2 touchscreen as found in the EZX phone platform.
+ *
+ *  Copyright (C) 2006 Harald Welte <laforge@openezx.org>
+ *  Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/slab.h>
+#include <linux/pm.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/mfd/ezx-pcap.h>
+
+struct pcap_ts {
+	struct pcap_chip *pcap;
+	struct input_dev *input;
+	struct delayed_work work;
+	u16 x, y;
+	u16 pressure;
+	u8 read_state;
+};
+
+#define SAMPLE_DELAY	20 /* msecs */
+
+#define X_AXIS_MIN	0
+#define X_AXIS_MAX	1023
+#define Y_AXIS_MAX	X_AXIS_MAX
+#define Y_AXIS_MIN	X_AXIS_MIN
+#define PRESSURE_MAX	X_AXIS_MAX
+#define PRESSURE_MIN	X_AXIS_MIN
+
+static void pcap_ts_read_xy(void *data, u16 res[2])
+{
+	struct pcap_ts *pcap_ts = data;
+
+	switch (pcap_ts->read_state) {
+	case PCAP_ADC_TS_M_PRESSURE:
+		/* pressure reading is unreliable */
+		if (res[0] > PRESSURE_MIN && res[0] < PRESSURE_MAX)
+			pcap_ts->pressure = res[0];
+		pcap_ts->read_state = PCAP_ADC_TS_M_XY;
+		schedule_delayed_work(&pcap_ts->work, 0);
+		break;
+	case PCAP_ADC_TS_M_XY:
+		pcap_ts->y = res[0];
+		pcap_ts->x = res[1];
+		if (pcap_ts->x <= X_AXIS_MIN || pcap_ts->x >= X_AXIS_MAX ||
+		    pcap_ts->y <= Y_AXIS_MIN || pcap_ts->y >= Y_AXIS_MAX) {
+			/* pen has been released */
+			input_report_abs(pcap_ts->input, ABS_PRESSURE, 0);
+			input_report_key(pcap_ts->input, BTN_TOUCH, 0);
+
+			pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
+			schedule_delayed_work(&pcap_ts->work, 0);
+		} else {
+			/* pen is touching the screen */
+			input_report_abs(pcap_ts->input, ABS_X, pcap_ts->x);
+			input_report_abs(pcap_ts->input, ABS_Y, pcap_ts->y);
+			input_report_key(pcap_ts->input, BTN_TOUCH, 1);
+			input_report_abs(pcap_ts->input, ABS_PRESSURE,
+						pcap_ts->pressure);
+
+			/* switch back to pressure read mode */
+			pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
+			schedule_delayed_work(&pcap_ts->work,
+					msecs_to_jiffies(SAMPLE_DELAY));
+		}
+		input_sync(pcap_ts->input);
+		break;
+	default:
+		dev_warn(&pcap_ts->input->dev,
+				"pcap_ts: Warning, unhandled read_state %d\n",
+				pcap_ts->read_state);
+		break;
+	}
+}
+
+static void pcap_ts_work(struct work_struct *work)
+{
+	struct delayed_work *dw = container_of(work, struct delayed_work, work);
+	struct pcap_ts *pcap_ts = container_of(dw, struct pcap_ts, work);
+	u8 ch[2];
+
+	pcap_set_ts_bits(pcap_ts->pcap,
+			pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+
+	if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY)
+		return;
+
+	/* start adc conversion */
+	ch[0] = PCAP_ADC_CH_TS_X1;
+	ch[1] = PCAP_ADC_CH_TS_Y1;
+	pcap_adc_async(pcap_ts->pcap, PCAP_ADC_BANK_1, 0, ch,
+						pcap_ts_read_xy, pcap_ts);
+}
+
+static irqreturn_t pcap_ts_event_touch(int pirq, void *data)
+{
+	struct pcap_ts *pcap_ts = data;
+
+	if (pcap_ts->read_state == PCAP_ADC_TS_M_STANDBY) {
+		pcap_ts->read_state = PCAP_ADC_TS_M_PRESSURE;
+		schedule_delayed_work(&pcap_ts->work, 0);
+	}
+	return IRQ_HANDLED;
+}
+
+static int pcap_ts_open(struct input_dev *dev)
+{
+	struct pcap_ts *pcap_ts = input_get_drvdata(dev);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_STANDBY;
+	schedule_delayed_work(&pcap_ts->work, 0);
+
+	return 0;
+}
+
+static void pcap_ts_close(struct input_dev *dev)
+{
+	struct pcap_ts *pcap_ts = input_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&pcap_ts->work);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+}
+
+static int pcap_ts_probe(struct platform_device *pdev)
+{
+	struct input_dev *input_dev;
+	struct pcap_ts *pcap_ts;
+	int err = -ENOMEM;
+
+	pcap_ts = kzalloc(sizeof(*pcap_ts), GFP_KERNEL);
+	if (!pcap_ts)
+		return err;
+
+	pcap_ts->pcap = dev_get_drvdata(pdev->dev.parent);
+	platform_set_drvdata(pdev, pcap_ts);
+
+	input_dev = input_allocate_device();
+	if (!input_dev)
+		goto fail;
+
+	INIT_DELAYED_WORK(&pcap_ts->work, pcap_ts_work);
+
+	pcap_ts->read_state = PCAP_ADC_TS_M_NONTS;
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+
+	pcap_ts->input = input_dev;
+	input_set_drvdata(input_dev, pcap_ts);
+
+	input_dev->name = "pcap-touchscreen";
+	input_dev->phys = "pcap_ts/input0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor = 0x0001;
+	input_dev->id.product = 0x0002;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = pcap_ts_open;
+	input_dev->close = pcap_ts_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, X_AXIS_MIN, X_AXIS_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, Y_AXIS_MIN, Y_AXIS_MAX, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, PRESSURE_MIN,
+			     PRESSURE_MAX, 0, 0);
+
+	err = input_register_device(pcap_ts->input);
+	if (err)
+		goto fail_allocate;
+
+	err = request_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS),
+			pcap_ts_event_touch, 0, "Touch Screen", pcap_ts);
+	if (err)
+		goto fail_register;
+
+	return 0;
+
+fail_register:
+	input_unregister_device(input_dev);
+	goto fail;
+fail_allocate:
+	input_free_device(input_dev);
+fail:
+	kfree(pcap_ts);
+
+	return err;
+}
+
+static int pcap_ts_remove(struct platform_device *pdev)
+{
+	struct pcap_ts *pcap_ts = platform_get_drvdata(pdev);
+
+	free_irq(pcap_to_irq(pcap_ts->pcap, PCAP_IRQ_TS), pcap_ts);
+	cancel_delayed_work_sync(&pcap_ts->work);
+
+	input_unregister_device(pcap_ts->input);
+
+	kfree(pcap_ts);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int pcap_ts_suspend(struct device *dev)
+{
+	struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
+
+	pcap_set_ts_bits(pcap_ts->pcap, PCAP_ADC_TS_REF_LOWPWR);
+	return 0;
+}
+
+static int pcap_ts_resume(struct device *dev)
+{
+	struct pcap_ts *pcap_ts = dev_get_drvdata(dev);
+
+	pcap_set_ts_bits(pcap_ts->pcap,
+				pcap_ts->read_state << PCAP_ADC_TS_M_SHIFT);
+	return 0;
+}
+
+static const struct dev_pm_ops pcap_ts_pm_ops = {
+	.suspend	= pcap_ts_suspend,
+	.resume		= pcap_ts_resume,
+};
+#define PCAP_TS_PM_OPS (&pcap_ts_pm_ops)
+#else
+#define PCAP_TS_PM_OPS NULL
+#endif
+
+static struct platform_driver pcap_ts_driver = {
+	.probe		= pcap_ts_probe,
+	.remove		= pcap_ts_remove,
+	.driver		= {
+		.name	= "pcap-ts",
+		.pm	= PCAP_TS_PM_OPS,
+	},
+};
+module_platform_driver(pcap_ts_driver);
+
+MODULE_DESCRIPTION("Motorola PCAP2 touchscreen driver");
+MODULE_AUTHOR("Daniel Ribeiro / Harald Welte");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcap_ts");
diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c
new file mode 100644
index 0000000..417d873
--- /dev/null
+++ b/drivers/input/touchscreen/penmount.c
@@ -0,0 +1,319 @@
+/*
+ * Penmount serial touchscreen driver
+ *
+ * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ * Copyright (c) 2011 John Sung <penmount.touch@gmail.com>
+ *
+ * Based on ELO driver (drivers/input/touchscreen/elo.c)
+ * Copyright (c) 2004 Vojtech Pavlik
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"PenMount serial touchscreen driver"
+
+MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
+MODULE_AUTHOR("John Sung <penmount.touch@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define	PM_MAX_LENGTH	6
+#define	PM_MAX_MTSLOT	16
+#define	PM_3000_MTSLOT	2
+#define	PM_6250_MTSLOT	12
+
+/*
+ * Multi-touch slot
+ */
+
+struct mt_slot {
+	unsigned short x, y;
+	bool active; /* is the touch valid? */
+};
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct pm {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[PM_MAX_LENGTH];
+	char phys[32];
+	unsigned char packetsize;
+	unsigned char maxcontacts;
+	struct mt_slot slots[PM_MAX_MTSLOT];
+	void (*parse_packet)(struct pm *);
+};
+
+/*
+ * pm_mtevent() sends mt events and also emulates pointer movement
+ */
+
+static void pm_mtevent(struct pm *pm, struct input_dev *input)
+{
+	int i;
+
+	for (i = 0; i < pm->maxcontacts; ++i) {
+		input_mt_slot(input, i);
+		input_mt_report_slot_state(input, MT_TOOL_FINGER,
+				pm->slots[i].active);
+		if (pm->slots[i].active) {
+			input_event(input, EV_ABS, ABS_MT_POSITION_X, pm->slots[i].x);
+			input_event(input, EV_ABS, ABS_MT_POSITION_Y, pm->slots[i].y);
+		}
+	}
+
+	input_mt_report_pointer_emulation(input, true);
+	input_sync(input);
+}
+
+/*
+ * pm_checkpacket() checks if data packet is valid
+ */
+
+static bool pm_checkpacket(unsigned char *packet)
+{
+	int total = 0;
+	int i;
+
+	for (i = 0; i < 5; i++)
+		total += packet[i];
+
+	return packet[5] == (unsigned char)~(total & 0xff);
+}
+
+static void pm_parse_9000(struct pm *pm)
+{
+	struct input_dev *dev = pm->dev;
+
+	if ((pm->data[0] & 0x80) && pm->packetsize == ++pm->idx) {
+		input_report_abs(dev, ABS_X, pm->data[1] * 128 + pm->data[2]);
+		input_report_abs(dev, ABS_Y, pm->data[3] * 128 + pm->data[4]);
+		input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40));
+		input_sync(dev);
+		pm->idx = 0;
+	}
+}
+
+static void pm_parse_6000(struct pm *pm)
+{
+	struct input_dev *dev = pm->dev;
+
+	if ((pm->data[0] & 0xbf) == 0x30 && pm->packetsize == ++pm->idx) {
+		if (pm_checkpacket(pm->data)) {
+			input_report_abs(dev, ABS_X,
+					pm->data[2] * 256 + pm->data[1]);
+			input_report_abs(dev, ABS_Y,
+					pm->data[4] * 256 + pm->data[3]);
+			input_report_key(dev, BTN_TOUCH, pm->data[0] & 0x40);
+			input_sync(dev);
+		}
+		pm->idx = 0;
+	}
+}
+
+static void pm_parse_3000(struct pm *pm)
+{
+	struct input_dev *dev = pm->dev;
+
+	if ((pm->data[0] & 0xce) == 0x40 && pm->packetsize == ++pm->idx) {
+		if (pm_checkpacket(pm->data)) {
+			int slotnum = pm->data[0] & 0x0f;
+			pm->slots[slotnum].active = pm->data[0] & 0x30;
+			pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1];
+			pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3];
+			pm_mtevent(pm, dev);
+		}
+		pm->idx = 0;
+	}
+}
+
+static void pm_parse_6250(struct pm *pm)
+{
+	struct input_dev *dev = pm->dev;
+
+	if ((pm->data[0] & 0xb0) == 0x30 && pm->packetsize == ++pm->idx) {
+		if (pm_checkpacket(pm->data)) {
+			int slotnum = pm->data[0] & 0x0f;
+			pm->slots[slotnum].active = pm->data[0] & 0x40;
+			pm->slots[slotnum].x = pm->data[2] * 256 + pm->data[1];
+			pm->slots[slotnum].y = pm->data[4] * 256 + pm->data[3];
+			pm_mtevent(pm, dev);
+		}
+		pm->idx = 0;
+	}
+}
+
+static irqreturn_t pm_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct pm *pm = serio_get_drvdata(serio);
+
+	pm->data[pm->idx] = data;
+
+	pm->parse_packet(pm);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * pm_disconnect() is the opposite of pm_connect()
+ */
+
+static void pm_disconnect(struct serio *serio)
+{
+	struct pm *pm = serio_get_drvdata(serio);
+
+	serio_close(serio);
+
+	input_unregister_device(pm->dev);
+	kfree(pm);
+
+	serio_set_drvdata(serio, NULL);
+}
+
+/*
+ * pm_connect() is the routine that is called when someone adds a
+ * new serio device that supports PenMount protocol and registers it as
+ * an input device.
+ */
+
+static int pm_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct pm *pm;
+	struct input_dev *input_dev;
+	int max_x, max_y;
+	int err;
+
+	pm = kzalloc(sizeof(struct pm), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!pm || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	pm->serio = serio;
+	pm->dev = input_dev;
+	snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys);
+	pm->maxcontacts = 1;
+
+	input_dev->name = "PenMount Serial TouchScreen";
+	input_dev->phys = pm->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_PENMOUNT;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	switch (serio->id.id) {
+	default:
+	case 0:
+		pm->packetsize = 5;
+		pm->parse_packet = pm_parse_9000;
+		input_dev->id.product = 0x9000;
+		max_x = max_y = 0x3ff;
+		break;
+
+	case 1:
+		pm->packetsize = 6;
+		pm->parse_packet = pm_parse_6000;
+		input_dev->id.product = 0x6000;
+		max_x = max_y = 0x3ff;
+		break;
+
+	case 2:
+		pm->packetsize = 6;
+		pm->parse_packet = pm_parse_3000;
+		input_dev->id.product = 0x3000;
+		max_x = max_y = 0x7ff;
+		pm->maxcontacts = PM_3000_MTSLOT;
+		break;
+
+	case 3:
+		pm->packetsize = 6;
+		pm->parse_packet = pm_parse_6250;
+		input_dev->id.product = 0x6250;
+		max_x = max_y = 0x3ff;
+		pm->maxcontacts = PM_6250_MTSLOT;
+		break;
+	}
+
+	input_set_abs_params(pm->dev, ABS_X, 0, max_x, 0, 0);
+	input_set_abs_params(pm->dev, ABS_Y, 0, max_y, 0, 0);
+
+	if (pm->maxcontacts > 1) {
+		input_mt_init_slots(pm->dev, pm->maxcontacts, 0);
+		input_set_abs_params(pm->dev,
+				     ABS_MT_POSITION_X, 0, max_x, 0, 0);
+		input_set_abs_params(pm->dev,
+				     ABS_MT_POSITION_Y, 0, max_y, 0, 0);
+	}
+
+	serio_set_drvdata(serio, pm);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(pm->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(pm);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id pm_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_PENMOUNT,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, pm_serio_ids);
+
+static struct serio_driver pm_drv = {
+	.driver		= {
+		.name	= "serio-penmount",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= pm_serio_ids,
+	.interrupt	= pm_interrupt,
+	.connect	= pm_connect,
+	.disconnect	= pm_disconnect,
+};
+
+module_serio_driver(pm_drv);
diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c
new file mode 100644
index 0000000..4b961ad
--- /dev/null
+++ b/drivers/input/touchscreen/pixcir_i2c_ts.c
@@ -0,0 +1,608 @@
+/*
+ * Driver for Pixcir I2C touchscreen controllers.
+ *
+ * Copyright (C) 2010-2011 Pixcir, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
+/*#include <linux/of.h>*/
+#include <linux/of_device.h>
+#include <linux/platform_data/pixcir_i2c_ts.h>
+
+#define PIXCIR_MAX_SLOTS       5 /* Max fingers supported by driver */
+
+struct pixcir_i2c_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+	struct gpio_desc *gpio_attb;
+	struct gpio_desc *gpio_reset;
+	const struct pixcir_i2c_chip_data *chip;
+	int max_fingers;	/* Max fingers supported in this instance */
+	bool running;
+};
+
+struct pixcir_touch {
+	int x;
+	int y;
+	int id;
+};
+
+struct pixcir_report_data {
+	int num_touches;
+	struct pixcir_touch touches[PIXCIR_MAX_SLOTS];
+};
+
+static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata,
+			    struct pixcir_report_data *report)
+{
+	u8 rdbuf[2 + PIXCIR_MAX_SLOTS * 5];
+	u8 wrbuf[1] = { 0 };
+	u8 *bufptr;
+	u8 touch;
+	int ret, i;
+	int readsize;
+	const struct pixcir_i2c_chip_data *chip = tsdata->chip;
+
+	memset(report, 0, sizeof(struct pixcir_report_data));
+
+	i = chip->has_hw_ids ? 1 : 0;
+	readsize = 2 + tsdata->max_fingers * (4 + i);
+	if (readsize > sizeof(rdbuf))
+		readsize = sizeof(rdbuf);
+
+	ret = i2c_master_send(tsdata->client, wrbuf, sizeof(wrbuf));
+	if (ret != sizeof(wrbuf)) {
+		dev_err(&tsdata->client->dev,
+			"%s: i2c_master_send failed(), ret=%d\n",
+			__func__, ret);
+		return;
+	}
+
+	ret = i2c_master_recv(tsdata->client, rdbuf, readsize);
+	if (ret != readsize) {
+		dev_err(&tsdata->client->dev,
+			"%s: i2c_master_recv failed(), ret=%d\n",
+			__func__, ret);
+		return;
+	}
+
+	touch = rdbuf[0] & 0x7;
+	if (touch > tsdata->max_fingers)
+		touch = tsdata->max_fingers;
+
+	report->num_touches = touch;
+	bufptr = &rdbuf[2];
+
+	for (i = 0; i < touch; i++) {
+		report->touches[i].x = (bufptr[1] << 8) | bufptr[0];
+		report->touches[i].y = (bufptr[3] << 8) | bufptr[2];
+
+		if (chip->has_hw_ids) {
+			report->touches[i].id = bufptr[4];
+			bufptr = bufptr + 5;
+		} else {
+			bufptr = bufptr + 4;
+		}
+	}
+}
+
+static void pixcir_ts_report(struct pixcir_i2c_ts_data *ts,
+			     struct pixcir_report_data *report)
+{
+	struct input_mt_pos pos[PIXCIR_MAX_SLOTS];
+	int slots[PIXCIR_MAX_SLOTS];
+	struct pixcir_touch *touch;
+	int n, i, slot;
+	struct device *dev = &ts->client->dev;
+	const struct pixcir_i2c_chip_data *chip = ts->chip;
+
+	n = report->num_touches;
+	if (n > PIXCIR_MAX_SLOTS)
+		n = PIXCIR_MAX_SLOTS;
+
+	if (!ts->chip->has_hw_ids) {
+		for (i = 0; i < n; i++) {
+			touch = &report->touches[i];
+			pos[i].x = touch->x;
+			pos[i].y = touch->y;
+		}
+
+		input_mt_assign_slots(ts->input, slots, pos, n, 0);
+	}
+
+	for (i = 0; i < n; i++) {
+		touch = &report->touches[i];
+
+		if (chip->has_hw_ids) {
+			slot = input_mt_get_slot_by_key(ts->input, touch->id);
+			if (slot < 0) {
+				dev_dbg(dev, "no free slot for id 0x%x\n",
+					touch->id);
+				continue;
+			}
+		} else {
+			slot = slots[i];
+		}
+
+		input_mt_slot(ts->input, slot);
+		input_mt_report_slot_state(ts->input,
+					   MT_TOOL_FINGER, true);
+
+		input_event(ts->input, EV_ABS, ABS_MT_POSITION_X, touch->x);
+		input_event(ts->input, EV_ABS, ABS_MT_POSITION_Y, touch->y);
+
+		dev_dbg(dev, "%d: slot %d, x %d, y %d\n",
+			i, slot, touch->x, touch->y);
+	}
+
+	input_mt_sync_frame(ts->input);
+	input_sync(ts->input);
+}
+
+static irqreturn_t pixcir_ts_isr(int irq, void *dev_id)
+{
+	struct pixcir_i2c_ts_data *tsdata = dev_id;
+	struct pixcir_report_data report;
+
+	while (tsdata->running) {
+		/* parse packet */
+		pixcir_ts_parse(tsdata, &report);
+
+		/* report it */
+		pixcir_ts_report(tsdata, &report);
+
+		if (gpiod_get_value_cansleep(tsdata->gpio_attb)) {
+			if (report.num_touches) {
+				/*
+				 * Last report with no finger up?
+				 * Do it now then.
+				 */
+				input_mt_sync_frame(tsdata->input);
+				input_sync(tsdata->input);
+			}
+			break;
+		}
+
+		msleep(20);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void pixcir_reset(struct pixcir_i2c_ts_data *tsdata)
+{
+	if (!IS_ERR_OR_NULL(tsdata->gpio_reset)) {
+		gpiod_set_value_cansleep(tsdata->gpio_reset, 1);
+		ndelay(100);	/* datasheet section 1.2.3 says 80ns min. */
+		gpiod_set_value_cansleep(tsdata->gpio_reset, 0);
+		/* wait for controller ready. 100ms guess. */
+		msleep(100);
+	}
+}
+
+static int pixcir_set_power_mode(struct pixcir_i2c_ts_data *ts,
+				 enum pixcir_power_mode mode)
+{
+	struct device *dev = &ts->client->dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_POWER_MODE);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_POWER_MODE, ret);
+		return ret;
+	}
+
+	ret &= ~PIXCIR_POWER_MODE_MASK;
+	ret |= mode;
+
+	/* Always AUTO_IDLE */
+	ret |= PIXCIR_POWER_ALLOW_IDLE;
+
+	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_POWER_MODE, ret);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_POWER_MODE, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Set the interrupt mode for the device i.e. ATTB line behaviour
+ *
+ * @polarity : 1 for active high, 0 for active low.
+ */
+static int pixcir_set_int_mode(struct pixcir_i2c_ts_data *ts,
+			       enum pixcir_int_mode mode, bool polarity)
+{
+	struct device *dev = &ts->client->dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	ret &= ~PIXCIR_INT_MODE_MASK;
+	ret |= mode;
+
+	if (polarity)
+		ret |= PIXCIR_INT_POL_HIGH;
+	else
+		ret &= ~PIXCIR_INT_POL_HIGH;
+
+	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/*
+ * Enable/disable interrupt generation
+ */
+static int pixcir_int_enable(struct pixcir_i2c_ts_data *ts, bool enable)
+{
+	struct device *dev = &ts->client->dev;
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(ts->client, PIXCIR_REG_INT_MODE);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't read reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	if (enable)
+		ret |= PIXCIR_INT_ENABLE;
+	else
+		ret &= ~PIXCIR_INT_ENABLE;
+
+	ret = i2c_smbus_write_byte_data(ts->client, PIXCIR_REG_INT_MODE, ret);
+	if (ret < 0) {
+		dev_err(dev, "%s: can't write reg 0x%x : %d\n",
+			__func__, PIXCIR_REG_INT_MODE, ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int pixcir_start(struct pixcir_i2c_ts_data *ts)
+{
+	struct device *dev = &ts->client->dev;
+	int error;
+
+	/* LEVEL_TOUCH interrupt with active low polarity */
+	error = pixcir_set_int_mode(ts, PIXCIR_INT_LEVEL_TOUCH, 0);
+	if (error) {
+		dev_err(dev, "Failed to set interrupt mode: %d\n", error);
+		return error;
+	}
+
+	ts->running = true;
+	mb();	/* Update status before IRQ can fire */
+
+	/* enable interrupt generation */
+	error = pixcir_int_enable(ts, true);
+	if (error) {
+		dev_err(dev, "Failed to enable interrupt generation: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int pixcir_stop(struct pixcir_i2c_ts_data *ts)
+{
+	int error;
+
+	/* Disable interrupt generation */
+	error = pixcir_int_enable(ts, false);
+	if (error) {
+		dev_err(&ts->client->dev,
+			"Failed to disable interrupt generation: %d\n",
+			error);
+		return error;
+	}
+
+	/* Exit ISR if running, no more report parsing */
+	ts->running = false;
+	mb();	/* update status before we synchronize irq */
+
+	/* Wait till running ISR is complete */
+	synchronize_irq(ts->client->irq);
+
+	return 0;
+}
+
+static int pixcir_input_open(struct input_dev *dev)
+{
+	struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev);
+
+	return pixcir_start(ts);
+}
+
+static void pixcir_input_close(struct input_dev *dev)
+{
+	struct pixcir_i2c_ts_data *ts = input_get_drvdata(dev);
+
+	pixcir_stop(ts);
+}
+
+static int __maybe_unused pixcir_i2c_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(&client->dev)) {
+		if (!input->users) {
+			ret = pixcir_start(ts);
+			if (ret) {
+				dev_err(dev, "Failed to start\n");
+				goto unlock;
+			}
+		}
+	} else if (input->users) {
+		ret = pixcir_stop(ts);
+	}
+
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
+}
+
+static int __maybe_unused pixcir_i2c_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct pixcir_i2c_ts_data *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
+
+	if (device_may_wakeup(&client->dev)) {
+
+		if (!input->users) {
+			ret = pixcir_stop(ts);
+			if (ret) {
+				dev_err(dev, "Failed to stop\n");
+				goto unlock;
+			}
+		}
+	} else if (input->users) {
+		ret = pixcir_start(ts);
+	}
+
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(pixcir_dev_pm_ops,
+			 pixcir_i2c_ts_suspend, pixcir_i2c_ts_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id pixcir_of_match[];
+
+static int pixcir_parse_dt(struct device *dev,
+			   struct pixcir_i2c_ts_data *tsdata)
+{
+	const struct of_device_id *match;
+
+	match = of_match_device(of_match_ptr(pixcir_of_match), dev);
+	if (!match)
+		return -EINVAL;
+
+	tsdata->chip = (const struct pixcir_i2c_chip_data *)match->data;
+	if (!tsdata->chip)
+		return -EINVAL;
+
+	return 0;
+}
+#else
+static int pixcir_parse_dt(struct device *dev,
+			   struct pixcir_i2c_ts_data *tsdata)
+{
+	return -EINVAL;
+}
+#endif
+
+static int pixcir_i2c_ts_probe(struct i2c_client *client,
+			       const struct i2c_device_id *id)
+{
+	const struct pixcir_ts_platform_data *pdata =
+			dev_get_platdata(&client->dev);
+	struct device *dev = &client->dev;
+	struct pixcir_i2c_ts_data *tsdata;
+	struct input_dev *input;
+	int error;
+
+	tsdata = devm_kzalloc(dev, sizeof(*tsdata), GFP_KERNEL);
+	if (!tsdata)
+		return -ENOMEM;
+
+	if (pdata) {
+		tsdata->chip = &pdata->chip;
+	} else if (dev->of_node) {
+		error = pixcir_parse_dt(dev, tsdata);
+		if (error)
+			return error;
+	} else {
+		dev_err(&client->dev, "platform data not defined\n");
+		return -EINVAL;
+	}
+
+	if (!tsdata->chip->max_fingers) {
+		dev_err(dev, "Invalid max_fingers in chip data\n");
+		return -EINVAL;
+	}
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "Failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	tsdata->client = client;
+	tsdata->input = input;
+
+	input->name = client->name;
+	input->id.bustype = BUS_I2C;
+	input->open = pixcir_input_open;
+	input->close = pixcir_input_close;
+	input->dev.parent = &client->dev;
+
+	if (pdata) {
+		input_set_abs_params(input, ABS_MT_POSITION_X, 0, pdata->x_max, 0, 0);
+		input_set_abs_params(input, ABS_MT_POSITION_Y, 0, pdata->y_max, 0, 0);
+	} else {
+		input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
+		input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
+		touchscreen_parse_properties(input, true);
+		if (!input_abs_get_max(input, ABS_MT_POSITION_X) ||
+		    !input_abs_get_max(input, ABS_MT_POSITION_Y)) {
+			dev_err(dev, "Touchscreen size is not specified\n");
+			return -EINVAL;
+		}
+	}
+
+	tsdata->max_fingers = tsdata->chip->max_fingers;
+	if (tsdata->max_fingers > PIXCIR_MAX_SLOTS) {
+		tsdata->max_fingers = PIXCIR_MAX_SLOTS;
+		dev_info(dev, "Limiting maximum fingers to %d\n",
+			 tsdata->max_fingers);
+	}
+
+	error = input_mt_init_slots(input, tsdata->max_fingers,
+				    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+	if (error) {
+		dev_err(dev, "Error initializing Multi-Touch slots\n");
+		return error;
+	}
+
+	input_set_drvdata(input, tsdata);
+
+	tsdata->gpio_attb = devm_gpiod_get(dev, "attb", GPIOD_IN);
+	if (IS_ERR(tsdata->gpio_attb)) {
+		error = PTR_ERR(tsdata->gpio_attb);
+		dev_err(dev, "Failed to request ATTB gpio: %d\n", error);
+		return error;
+	}
+
+	tsdata->gpio_reset = devm_gpiod_get_optional(dev, "reset",
+						     GPIOD_OUT_LOW);
+	if (IS_ERR(tsdata->gpio_reset)) {
+		error = PTR_ERR(tsdata->gpio_reset);
+		dev_err(dev, "Failed to request RESET gpio: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(dev, client->irq, NULL, pixcir_ts_isr,
+					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					  client->name, tsdata);
+	if (error) {
+		dev_err(dev, "failed to request irq %d\n", client->irq);
+		return error;
+	}
+
+	pixcir_reset(tsdata);
+
+	/* Always be in IDLE mode to save power, device supports auto wake */
+	error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE);
+	if (error) {
+		dev_err(dev, "Failed to set IDLE mode\n");
+		return error;
+	}
+
+	/* Stop device till opened */
+	error = pixcir_stop(tsdata);
+	if (error)
+		return error;
+
+	error = input_register_device(input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, tsdata);
+
+	return 0;
+}
+
+static const struct i2c_device_id pixcir_i2c_ts_id[] = {
+	{ "pixcir_ts", 0 },
+	{ "pixcir_tangoc", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, pixcir_i2c_ts_id);
+
+#ifdef CONFIG_OF
+static const struct pixcir_i2c_chip_data pixcir_ts_data = {
+	.max_fingers = 2,
+	/* no hw id support */
+};
+
+static const struct pixcir_i2c_chip_data pixcir_tangoc_data = {
+	.max_fingers = 5,
+	.has_hw_ids = true,
+};
+
+static const struct of_device_id pixcir_of_match[] = {
+	{ .compatible = "pixcir,pixcir_ts", .data = &pixcir_ts_data },
+	{ .compatible = "pixcir,pixcir_tangoc", .data = &pixcir_tangoc_data },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, pixcir_of_match);
+#endif
+
+static struct i2c_driver pixcir_i2c_ts_driver = {
+	.driver = {
+		.name	= "pixcir_ts",
+		.pm	= &pixcir_dev_pm_ops,
+		.of_match_table = of_match_ptr(pixcir_of_match),
+	},
+	.probe		= pixcir_i2c_ts_probe,
+	.id_table	= pixcir_i2c_ts_id,
+};
+
+module_i2c_driver(pixcir_i2c_ts_driver);
+
+MODULE_AUTHOR("Jianchun Bian <jcbian@pixcir.com.cn>, Dequan Meng <dqmeng@pixcir.com.cn>");
+MODULE_DESCRIPTION("Pixcir I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/rohm_bu21023.c b/drivers/input/touchscreen/rohm_bu21023.c
new file mode 100644
index 0000000..ba6024f
--- /dev/null
+++ b/drivers/input/touchscreen/rohm_bu21023.c
@@ -0,0 +1,1218 @@
+/*
+ * ROHM BU21023/24 Dual touch support resistive touch screen driver
+ * Copyright (C) 2012 ROHM CO.,LTD.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+#include <linux/delay.h>
+#include <linux/firmware.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#define BU21023_NAME			"bu21023_ts"
+#define BU21023_FIRMWARE_NAME		"bu21023.bin"
+
+#define MAX_CONTACTS			2
+
+#define AXIS_ADJUST			4
+#define AXIS_OFFSET			8
+
+#define FIRMWARE_BLOCK_SIZE		32U
+#define FIRMWARE_RETRY_MAX		4
+
+#define SAMPLING_DELAY			12	/* msec */
+
+#define CALIBRATION_RETRY_MAX		6
+
+#define ROHM_TS_ABS_X_MIN		40
+#define ROHM_TS_ABS_X_MAX		990
+#define ROHM_TS_ABS_Y_MIN		160
+#define ROHM_TS_ABS_Y_MAX		920
+#define ROHM_TS_DISPLACEMENT_MAX	0	/* zero for infinite */
+
+/*
+ * BU21023GUL/BU21023MUV/BU21024FV-M registers map
+ */
+#define VADOUT_YP_H		0x00
+#define VADOUT_YP_L		0x01
+#define VADOUT_XP_H		0x02
+#define VADOUT_XP_L		0x03
+#define VADOUT_YN_H		0x04
+#define VADOUT_YN_L		0x05
+#define VADOUT_XN_H		0x06
+#define VADOUT_XN_L		0x07
+
+#define PRM1_X_H		0x08
+#define PRM1_X_L		0x09
+#define PRM1_Y_H		0x0a
+#define PRM1_Y_L		0x0b
+#define PRM2_X_H		0x0c
+#define PRM2_X_L		0x0d
+#define PRM2_Y_H		0x0e
+#define PRM2_Y_L		0x0f
+
+#define MLT_PRM_MONI_X		0x10
+#define MLT_PRM_MONI_Y		0x11
+
+#define DEBUG_MONI_1		0x12
+#define DEBUG_MONI_2		0x13
+
+#define VADOUT_ZX_H		0x14
+#define VADOUT_ZX_L		0x15
+#define VADOUT_ZY_H		0x16
+#define VADOUT_ZY_L		0x17
+
+#define Z_PARAM_H		0x18
+#define Z_PARAM_L		0x19
+
+/*
+ * Value for VADOUT_*_L
+ */
+#define VADOUT_L_MASK		0x01
+
+/*
+ * Value for PRM*_*_L
+ */
+#define PRM_L_MASK		0x01
+
+#define POS_X1_H		0x20
+#define POS_X1_L		0x21
+#define POS_Y1_H		0x22
+#define POS_Y1_L		0x23
+#define POS_X2_H		0x24
+#define POS_X2_L		0x25
+#define POS_Y2_H		0x26
+#define POS_Y2_L		0x27
+
+/*
+ * Value for POS_*_L
+ */
+#define POS_L_MASK		0x01
+
+#define TOUCH			0x28
+#define TOUCH_DETECT		0x01
+
+#define TOUCH_GESTURE		0x29
+#define SINGLE_TOUCH		0x01
+#define DUAL_TOUCH		0x03
+#define TOUCH_MASK		0x03
+#define CALIBRATION_REQUEST	0x04
+#define CALIBRATION_STATUS	0x08
+#define CALIBRATION_MASK	0x0c
+#define GESTURE_SPREAD		0x10
+#define GESTURE_PINCH		0x20
+#define GESTURE_ROTATE_R	0x40
+#define GESTURE_ROTATE_L	0x80
+
+#define INT_STATUS		0x2a
+#define INT_MASK		0x3d
+#define INT_CLEAR		0x3e
+
+/*
+ * Values for INT_*
+ */
+#define COORD_UPDATE		0x01
+#define CALIBRATION_DONE	0x02
+#define SLEEP_IN		0x04
+#define SLEEP_OUT		0x08
+#define PROGRAM_LOAD_DONE	0x10
+#define ERROR			0x80
+#define INT_ALL			0x9f
+
+#define ERR_STATUS		0x2b
+#define ERR_MASK		0x3f
+
+/*
+ * Values for ERR_*
+ */
+#define ADC_TIMEOUT		0x01
+#define CPU_TIMEOUT		0x02
+#define CALIBRATION_ERR		0x04
+#define PROGRAM_LOAD_ERR	0x10
+
+#define COMMON_SETUP1			0x30
+#define PROGRAM_LOAD_HOST		0x02
+#define PROGRAM_LOAD_EEPROM		0x03
+#define CENSOR_4PORT			0x04
+#define CENSOR_8PORT			0x00	/* Not supported by BU21023 */
+#define CALIBRATION_TYPE_DEFAULT	0x08
+#define CALIBRATION_TYPE_SPECIAL	0x00
+#define INT_ACTIVE_HIGH			0x10
+#define INT_ACTIVE_LOW			0x00
+#define AUTO_CALIBRATION		0x40
+#define MANUAL_CALIBRATION		0x00
+#define COMMON_SETUP1_DEFAULT		0x4e
+
+#define COMMON_SETUP2		0x31
+#define MAF_NONE		0x00
+#define MAF_1SAMPLE		0x01
+#define MAF_3SAMPLES		0x02
+#define MAF_5SAMPLES		0x03
+#define INV_Y			0x04
+#define INV_X			0x08
+#define SWAP_XY			0x10
+
+#define COMMON_SETUP3		0x32
+#define EN_SLEEP		0x01
+#define EN_MULTI		0x02
+#define EN_GESTURE		0x04
+#define EN_INTVL		0x08
+#define SEL_STEP		0x10
+#define SEL_MULTI		0x20
+#define SEL_TBL_DEFAULT		0x40
+
+#define INTERVAL_TIME		0x33
+#define INTERVAL_TIME_DEFAULT	0x10
+
+#define STEP_X			0x34
+#define STEP_X_DEFAULT		0x41
+
+#define STEP_Y			0x35
+#define STEP_Y_DEFAULT		0x8d
+
+#define OFFSET_X		0x38
+#define OFFSET_X_DEFAULT	0x0c
+
+#define OFFSET_Y		0x39
+#define OFFSET_Y_DEFAULT	0x0c
+
+#define THRESHOLD_TOUCH		0x3a
+#define THRESHOLD_TOUCH_DEFAULT	0xa0
+
+#define THRESHOLD_GESTURE		0x3b
+#define THRESHOLD_GESTURE_DEFAULT	0x17
+
+#define SYSTEM			0x40
+#define ANALOG_POWER_ON		0x01
+#define ANALOG_POWER_OFF	0x00
+#define CPU_POWER_ON		0x02
+#define CPU_POWER_OFF		0x00
+
+#define FORCE_CALIBRATION	0x42
+#define FORCE_CALIBRATION_ON	0x01
+#define FORCE_CALIBRATION_OFF	0x00
+
+#define CPU_FREQ		0x50	/* 10 / (reg + 1) MHz */
+#define CPU_FREQ_10MHZ		0x00
+#define CPU_FREQ_5MHZ		0x01
+#define CPU_FREQ_1MHZ		0x09
+
+#define EEPROM_ADDR		0x51
+
+#define CALIBRATION_ADJUST		0x52
+#define CALIBRATION_ADJUST_DEFAULT	0x00
+
+#define THRESHOLD_SLEEP_IN	0x53
+
+#define EVR_XY			0x56
+#define EVR_XY_DEFAULT		0x10
+
+#define PRM_SWOFF_TIME		0x57
+#define PRM_SWOFF_TIME_DEFAULT	0x04
+
+#define PROGRAM_VERSION		0x5f
+
+#define ADC_CTRL		0x60
+#define ADC_DIV_MASK		0x1f	/* The minimum value is 4 */
+#define ADC_DIV_DEFAULT		0x08
+
+#define ADC_WAIT		0x61
+#define ADC_WAIT_DEFAULT	0x0a
+
+#define SWCONT			0x62
+#define SWCONT_DEFAULT		0x0f
+
+#define EVR_X			0x63
+#define EVR_X_DEFAULT		0x86
+
+#define EVR_Y			0x64
+#define EVR_Y_DEFAULT		0x64
+
+#define TEST1			0x65
+#define DUALTOUCH_STABILIZE_ON	0x01
+#define DUALTOUCH_STABILIZE_OFF	0x00
+#define DUALTOUCH_REG_ON	0x20
+#define DUALTOUCH_REG_OFF	0x00
+
+#define CALIBRATION_REG1		0x68
+#define CALIBRATION_REG1_DEFAULT	0xd9
+
+#define CALIBRATION_REG2		0x69
+#define CALIBRATION_REG2_DEFAULT	0x36
+
+#define CALIBRATION_REG3		0x6a
+#define CALIBRATION_REG3_DEFAULT	0x32
+
+#define EX_ADDR_H		0x70
+#define EX_ADDR_L		0x71
+#define EX_WDAT			0x72
+#define EX_RDAT			0x73
+#define EX_CHK_SUM1		0x74
+#define EX_CHK_SUM2		0x75
+#define EX_CHK_SUM3		0x76
+
+struct rohm_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input;
+
+	bool initialized;
+
+	unsigned int contact_count[MAX_CONTACTS + 1];
+	int finger_count;
+
+	u8 setup2;
+};
+
+/*
+ * rohm_i2c_burst_read - execute combined I2C message for ROHM BU21023/24
+ * @client: Handle to ROHM BU21023/24
+ * @start: Where to start read address from ROHM BU21023/24
+ * @buf: Where to store read data from ROHM BU21023/24
+ * @len: How many bytes to read
+ *
+ * Returns negative errno, else zero on success.
+ *
+ * Note
+ * In BU21023/24 burst read, stop condition is needed after "address write".
+ * Therefore, transmission is performed in 2 steps.
+ */
+static int rohm_i2c_burst_read(struct i2c_client *client, u8 start, void *buf,
+			       size_t len)
+{
+	struct i2c_adapter *adap = client->adapter;
+	struct i2c_msg msg[2];
+	int i, ret = 0;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = &start;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = len;
+	msg[1].buf = buf;
+
+	i2c_lock_adapter(adap);
+
+	for (i = 0; i < 2; i++) {
+		if (__i2c_transfer(adap, &msg[i], 1) < 0) {
+			ret = -EIO;
+			break;
+		}
+	}
+
+	i2c_unlock_adapter(adap);
+
+	return ret;
+}
+
+static int rohm_ts_manual_calibration(struct rohm_ts_data *ts)
+{
+	struct i2c_client *client = ts->client;
+	struct device *dev = &client->dev;
+	u8 buf[33];	/* for PRM1_X_H(0x08)-TOUCH(0x28) */
+
+	int retry;
+	bool success = false;
+	bool first_time = true;
+	bool calibration_done;
+
+	u8 reg1, reg2, reg3;
+	s32 reg1_orig, reg2_orig, reg3_orig;
+	s32 val;
+
+	int calib_x = 0, calib_y = 0;
+	int reg_x, reg_y;
+	int err_x, err_y;
+
+	int error, error2;
+	int i;
+
+	reg1_orig = i2c_smbus_read_byte_data(client, CALIBRATION_REG1);
+	if (reg1_orig < 0)
+		return reg1_orig;
+
+	reg2_orig = i2c_smbus_read_byte_data(client, CALIBRATION_REG2);
+	if (reg2_orig < 0)
+		return reg2_orig;
+
+	reg3_orig = i2c_smbus_read_byte_data(client, CALIBRATION_REG3);
+	if (reg3_orig < 0)
+		return reg3_orig;
+
+	error = i2c_smbus_write_byte_data(client, INT_MASK,
+					  COORD_UPDATE | SLEEP_IN | SLEEP_OUT |
+					  PROGRAM_LOAD_DONE);
+	if (error)
+		goto out;
+
+	error = i2c_smbus_write_byte_data(client, TEST1,
+					  DUALTOUCH_STABILIZE_ON);
+	if (error)
+		goto out;
+
+	for (retry = 0; retry < CALIBRATION_RETRY_MAX; retry++) {
+		/* wait 2 sampling for update */
+		mdelay(2 * SAMPLING_DELAY);
+
+#define READ_CALIB_BUF(reg)	buf[((reg) - PRM1_X_H)]
+
+		error = rohm_i2c_burst_read(client, PRM1_X_H, buf, sizeof(buf));
+		if (error)
+			goto out;
+
+		if (READ_CALIB_BUF(TOUCH) & TOUCH_DETECT)
+			continue;
+
+		if (first_time) {
+			/* generate calibration parameter */
+			calib_x = ((int)READ_CALIB_BUF(PRM1_X_H) << 2 |
+				READ_CALIB_BUF(PRM1_X_L)) - AXIS_OFFSET;
+			calib_y = ((int)READ_CALIB_BUF(PRM1_Y_H) << 2 |
+				READ_CALIB_BUF(PRM1_Y_L)) - AXIS_OFFSET;
+
+			error = i2c_smbus_write_byte_data(client, TEST1,
+				DUALTOUCH_STABILIZE_ON | DUALTOUCH_REG_ON);
+			if (error)
+				goto out;
+
+			first_time = false;
+		} else {
+			/* generate adjustment parameter */
+			err_x = (int)READ_CALIB_BUF(PRM1_X_H) << 2 |
+				READ_CALIB_BUF(PRM1_X_L);
+			err_y = (int)READ_CALIB_BUF(PRM1_Y_H) << 2 |
+				READ_CALIB_BUF(PRM1_Y_L);
+
+			/* X axis ajust */
+			if (err_x <= 4)
+				calib_x -= AXIS_ADJUST;
+			else if (err_x >= 60)
+				calib_x += AXIS_ADJUST;
+
+			/* Y axis ajust */
+			if (err_y <= 4)
+				calib_y -= AXIS_ADJUST;
+			else if (err_y >= 60)
+				calib_y += AXIS_ADJUST;
+		}
+
+		/* generate calibration setting value */
+		reg_x = calib_x + ((calib_x & 0x200) << 1);
+		reg_y = calib_y + ((calib_y & 0x200) << 1);
+
+		/* convert for register format */
+		reg1 = reg_x >> 3;
+		reg2 = (reg_y & 0x7) << 4 | (reg_x & 0x7);
+		reg3 = reg_y >> 3;
+
+		error = i2c_smbus_write_byte_data(client,
+						  CALIBRATION_REG1, reg1);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client,
+						  CALIBRATION_REG2, reg2);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client,
+						  CALIBRATION_REG3, reg3);
+		if (error)
+			goto out;
+
+		/*
+		 * force calibration sequcence
+		 */
+		error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+						  FORCE_CALIBRATION_OFF);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+						  FORCE_CALIBRATION_ON);
+		if (error)
+			goto out;
+
+		/* clear all interrupts */
+		error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+		if (error)
+			goto out;
+
+		/*
+		 * Wait for the status change of calibration, max 10 sampling
+		 */
+		calibration_done = false;
+
+		for (i = 0; i < 10; i++) {
+			mdelay(SAMPLING_DELAY);
+
+			val = i2c_smbus_read_byte_data(client, TOUCH_GESTURE);
+			if (!(val & CALIBRATION_MASK)) {
+				calibration_done = true;
+				break;
+			} else if (val < 0) {
+				error = val;
+				goto out;
+			}
+		}
+
+		if (calibration_done) {
+			val = i2c_smbus_read_byte_data(client, INT_STATUS);
+			if (val == CALIBRATION_DONE) {
+				success = true;
+				break;
+			} else if (val < 0) {
+				error = val;
+				goto out;
+			}
+		} else {
+			dev_warn(dev, "calibration timeout\n");
+		}
+	}
+
+	if (!success) {
+		error = i2c_smbus_write_byte_data(client, CALIBRATION_REG1,
+						  reg1_orig);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client, CALIBRATION_REG2,
+						  reg2_orig);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client, CALIBRATION_REG3,
+						  reg3_orig);
+		if (error)
+			goto out;
+
+		/* calibration data enable */
+		error = i2c_smbus_write_byte_data(client, TEST1,
+						  DUALTOUCH_STABILIZE_ON |
+						  DUALTOUCH_REG_ON);
+		if (error)
+			goto out;
+
+		/* wait 10 sampling */
+		mdelay(10 * SAMPLING_DELAY);
+
+		error = -EBUSY;
+	}
+
+out:
+	error2 = i2c_smbus_write_byte_data(client, INT_MASK, INT_ALL);
+	if (!error2)
+		/* Clear all interrupts */
+		error2 = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+
+	return error ? error : error2;
+}
+
+static const unsigned int untouch_threshold[3] = { 0, 1, 5 };
+static const unsigned int single_touch_threshold[3] = { 0, 0, 4 };
+static const unsigned int dual_touch_threshold[3] = { 10, 8, 0 };
+
+static irqreturn_t rohm_ts_soft_irq(int irq, void *dev_id)
+{
+	struct rohm_ts_data *ts = dev_id;
+	struct i2c_client *client = ts->client;
+	struct input_dev *input_dev = ts->input;
+	struct device *dev = &client->dev;
+
+	u8 buf[10];	/* for POS_X1_H(0x20)-TOUCH_GESTURE(0x29) */
+
+	struct input_mt_pos pos[MAX_CONTACTS];
+	int slots[MAX_CONTACTS];
+	u8 touch_flags;
+	unsigned int threshold;
+	int finger_count = -1;
+	int prev_finger_count = ts->finger_count;
+	int count;
+	int error;
+	int i;
+
+	error = i2c_smbus_write_byte_data(client, INT_MASK, INT_ALL);
+	if (error)
+		return IRQ_HANDLED;
+
+	/* Clear all interrupts */
+	error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+	if (error)
+		return IRQ_HANDLED;
+
+#define READ_POS_BUF(reg)	buf[((reg) - POS_X1_H)]
+
+	error = rohm_i2c_burst_read(client, POS_X1_H, buf, sizeof(buf));
+	if (error)
+		return IRQ_HANDLED;
+
+	touch_flags = READ_POS_BUF(TOUCH_GESTURE) & TOUCH_MASK;
+	if (touch_flags) {
+		/* generate coordinates */
+		pos[0].x = ((s16)READ_POS_BUF(POS_X1_H) << 2) |
+			   READ_POS_BUF(POS_X1_L);
+		pos[0].y = ((s16)READ_POS_BUF(POS_Y1_H) << 2) |
+			   READ_POS_BUF(POS_Y1_L);
+		pos[1].x = ((s16)READ_POS_BUF(POS_X2_H) << 2) |
+			   READ_POS_BUF(POS_X2_L);
+		pos[1].y = ((s16)READ_POS_BUF(POS_Y2_H) << 2) |
+			   READ_POS_BUF(POS_Y2_L);
+	}
+
+	switch (touch_flags) {
+	case 0:
+		threshold = untouch_threshold[prev_finger_count];
+		if (++ts->contact_count[0] >= threshold)
+			finger_count = 0;
+		break;
+
+	case SINGLE_TOUCH:
+		threshold = single_touch_threshold[prev_finger_count];
+		if (++ts->contact_count[1] >= threshold)
+			finger_count = 1;
+
+		if (finger_count == 1) {
+			if (pos[1].x != 0 && pos[1].y != 0) {
+				pos[0].x = pos[1].x;
+				pos[0].y = pos[1].y;
+				pos[1].x = 0;
+				pos[1].y = 0;
+			}
+		}
+		break;
+
+	case DUAL_TOUCH:
+		threshold = dual_touch_threshold[prev_finger_count];
+		if (++ts->contact_count[2] >= threshold)
+			finger_count = 2;
+		break;
+
+	default:
+		dev_dbg(dev,
+			"Three or more touches are not supported\n");
+		return IRQ_HANDLED;
+	}
+
+	if (finger_count >= 0) {
+		if (prev_finger_count != finger_count) {
+			count = ts->contact_count[finger_count];
+			memset(ts->contact_count, 0, sizeof(ts->contact_count));
+			ts->contact_count[finger_count] = count;
+		}
+
+		input_mt_assign_slots(input_dev, slots, pos,
+				      finger_count, ROHM_TS_DISPLACEMENT_MAX);
+
+		for (i = 0; i < finger_count; i++) {
+			input_mt_slot(input_dev, slots[i]);
+			input_mt_report_slot_state(input_dev,
+						   MT_TOOL_FINGER, true);
+			input_report_abs(input_dev,
+					 ABS_MT_POSITION_X, pos[i].x);
+			input_report_abs(input_dev,
+					 ABS_MT_POSITION_Y, pos[i].y);
+		}
+
+		input_mt_sync_frame(input_dev);
+		input_mt_report_pointer_emulation(input_dev, true);
+		input_sync(input_dev);
+
+		ts->finger_count = finger_count;
+	}
+
+	if (READ_POS_BUF(TOUCH_GESTURE) & CALIBRATION_REQUEST) {
+		error = rohm_ts_manual_calibration(ts);
+		if (error)
+			dev_warn(dev, "manual calibration failed: %d\n",
+				 error);
+	}
+
+	i2c_smbus_write_byte_data(client, INT_MASK,
+				  CALIBRATION_DONE | SLEEP_OUT | SLEEP_IN |
+				  PROGRAM_LOAD_DONE);
+
+	return IRQ_HANDLED;
+}
+
+static int rohm_ts_load_firmware(struct i2c_client *client,
+				 const char *firmware_name)
+{
+	struct device *dev = &client->dev;
+	const struct firmware *fw;
+	s32 status;
+	unsigned int offset, len, xfer_len;
+	unsigned int retry = 0;
+	int error, error2;
+
+	error = request_firmware(&fw, firmware_name, dev);
+	if (error) {
+		dev_err(dev, "unable to retrieve firmware %s: %d\n",
+			firmware_name, error);
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, INT_MASK,
+					  COORD_UPDATE | CALIBRATION_DONE |
+					  SLEEP_IN | SLEEP_OUT);
+	if (error)
+		goto out;
+
+	do {
+		if (retry) {
+			dev_warn(dev, "retrying firmware load\n");
+
+			/* settings for retry */
+			error = i2c_smbus_write_byte_data(client, EX_WDAT, 0);
+			if (error)
+				goto out;
+		}
+
+		error = i2c_smbus_write_byte_data(client, EX_ADDR_H, 0);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client, EX_ADDR_L, 0);
+		if (error)
+			goto out;
+
+		error = i2c_smbus_write_byte_data(client, COMMON_SETUP1,
+						  COMMON_SETUP1_DEFAULT);
+		if (error)
+			goto out;
+
+		/* firmware load to the device */
+		offset = 0;
+		len = fw->size;
+
+		while (len) {
+			xfer_len = min(FIRMWARE_BLOCK_SIZE, len);
+
+			error = i2c_smbus_write_i2c_block_data(client, EX_WDAT,
+						xfer_len, &fw->data[offset]);
+			if (error)
+				goto out;
+
+			len -= xfer_len;
+			offset += xfer_len;
+		}
+
+		/* check firmware load result */
+		status = i2c_smbus_read_byte_data(client, INT_STATUS);
+		if (status < 0) {
+			error = status;
+			goto out;
+		}
+
+		/* clear all interrupts */
+		error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+		if (error)
+			goto out;
+
+		if (status == PROGRAM_LOAD_DONE)
+			break;
+
+		error = -EIO;
+	} while (++retry >= FIRMWARE_RETRY_MAX);
+
+out:
+	error2 = i2c_smbus_write_byte_data(client, INT_MASK, INT_ALL);
+
+	release_firmware(fw);
+
+	return error ? error : error2;
+}
+
+static ssize_t swap_xy_show(struct device *dev, struct device_attribute *attr,
+			    char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%d\n", !!(ts->setup2 & SWAP_XY));
+}
+
+static ssize_t swap_xy_store(struct device *dev, struct device_attribute *attr,
+			     const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 0, &val);
+	if (error)
+		return error;
+
+	error = mutex_lock_interruptible(&ts->input->mutex);
+	if (error)
+		return error;
+
+	if (val)
+		ts->setup2 |= SWAP_XY;
+	else
+		ts->setup2 &= ~SWAP_XY;
+
+	if (ts->initialized)
+		error = i2c_smbus_write_byte_data(ts->client, COMMON_SETUP2,
+						  ts->setup2);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return error ? error : count;
+}
+
+static ssize_t inv_x_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%d\n", !!(ts->setup2 & INV_X));
+}
+
+static ssize_t inv_x_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 0, &val);
+	if (error)
+		return error;
+
+	error = mutex_lock_interruptible(&ts->input->mutex);
+	if (error)
+		return error;
+
+	if (val)
+		ts->setup2 |= INV_X;
+	else
+		ts->setup2 &= ~INV_X;
+
+	if (ts->initialized)
+		error = i2c_smbus_write_byte_data(ts->client, COMMON_SETUP2,
+						  ts->setup2);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return error ? error : count;
+}
+
+static ssize_t inv_y_show(struct device *dev, struct device_attribute *attr,
+			  char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+
+	return sprintf(buf, "%d\n", !!(ts->setup2 & INV_Y));
+}
+
+static ssize_t inv_y_store(struct device *dev, struct device_attribute *attr,
+			   const char *buf, size_t count)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct rohm_ts_data *ts = i2c_get_clientdata(client);
+	unsigned int val;
+	int error;
+
+	error = kstrtouint(buf, 0, &val);
+	if (error)
+		return error;
+
+	error = mutex_lock_interruptible(&ts->input->mutex);
+	if (error)
+		return error;
+
+	if (val)
+		ts->setup2 |= INV_Y;
+	else
+		ts->setup2 &= ~INV_Y;
+
+	if (ts->initialized)
+		error = i2c_smbus_write_byte_data(client, COMMON_SETUP2,
+						  ts->setup2);
+
+	mutex_unlock(&ts->input->mutex);
+
+	return error ? error : count;
+}
+
+static DEVICE_ATTR_RW(swap_xy);
+static DEVICE_ATTR_RW(inv_x);
+static DEVICE_ATTR_RW(inv_y);
+
+static struct attribute *rohm_ts_attrs[] = {
+	&dev_attr_swap_xy.attr,
+	&dev_attr_inv_x.attr,
+	&dev_attr_inv_y.attr,
+	NULL,
+};
+
+static const struct attribute_group rohm_ts_attr_group = {
+	.attrs = rohm_ts_attrs,
+};
+
+static int rohm_ts_device_init(struct i2c_client *client, u8 setup2)
+{
+	struct device *dev = &client->dev;
+	int error;
+
+	disable_irq(client->irq);
+
+	/*
+	 * Wait 200usec for reset
+	 */
+	udelay(200);
+
+	/* Release analog reset */
+	error = i2c_smbus_write_byte_data(client, SYSTEM,
+					  ANALOG_POWER_ON | CPU_POWER_OFF);
+	if (error)
+		return error;
+
+	/* Waiting for the analog warm-up, max. 200usec */
+	udelay(200);
+
+	/* clear all interrupts */
+	error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, EX_WDAT, 0);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, COMMON_SETUP1, 0);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, COMMON_SETUP2, setup2);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, COMMON_SETUP3,
+					  SEL_TBL_DEFAULT | EN_MULTI);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, THRESHOLD_GESTURE,
+					  THRESHOLD_GESTURE_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, INTERVAL_TIME,
+					  INTERVAL_TIME_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, CPU_FREQ, CPU_FREQ_10MHZ);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, PRM_SWOFF_TIME,
+					  PRM_SWOFF_TIME_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, ADC_CTRL, ADC_DIV_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, ADC_WAIT, ADC_WAIT_DEFAULT);
+	if (error)
+		return error;
+
+	/*
+	 * Panel setup, these values change with the panel.
+	 */
+	error = i2c_smbus_write_byte_data(client, STEP_X, STEP_X_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, STEP_Y, STEP_Y_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, OFFSET_X, OFFSET_X_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, OFFSET_Y, OFFSET_Y_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, THRESHOLD_TOUCH,
+					  THRESHOLD_TOUCH_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, EVR_XY, EVR_XY_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, EVR_X, EVR_X_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, EVR_Y, EVR_Y_DEFAULT);
+	if (error)
+		return error;
+
+	/* Fixed value settings */
+	error = i2c_smbus_write_byte_data(client, CALIBRATION_ADJUST,
+					  CALIBRATION_ADJUST_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, SWCONT, SWCONT_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, TEST1,
+					  DUALTOUCH_STABILIZE_ON |
+					  DUALTOUCH_REG_ON);
+	if (error)
+		return error;
+
+	error = rohm_ts_load_firmware(client, BU21023_FIRMWARE_NAME);
+	if (error) {
+		dev_err(dev, "failed to load firmware: %d\n", error);
+		return error;
+	}
+
+	/*
+	 * Manual calibration results are not changed in same environment.
+	 * If the force calibration is performed,
+	 * the controller will not require calibration request interrupt
+	 * when the typical values are set to the calibration registers.
+	 */
+	error = i2c_smbus_write_byte_data(client, CALIBRATION_REG1,
+					  CALIBRATION_REG1_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, CALIBRATION_REG2,
+					  CALIBRATION_REG2_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, CALIBRATION_REG3,
+					  CALIBRATION_REG3_DEFAULT);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+					  FORCE_CALIBRATION_OFF);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, FORCE_CALIBRATION,
+					  FORCE_CALIBRATION_ON);
+	if (error)
+		return error;
+
+	/* Clear all interrupts */
+	error = i2c_smbus_write_byte_data(client, INT_CLEAR, 0xff);
+	if (error)
+		return error;
+
+	/* Enable coordinates update interrupt */
+	error = i2c_smbus_write_byte_data(client, INT_MASK,
+					  CALIBRATION_DONE | SLEEP_OUT |
+					  SLEEP_IN | PROGRAM_LOAD_DONE);
+	if (error)
+		return error;
+
+	error = i2c_smbus_write_byte_data(client, ERR_MASK,
+					  PROGRAM_LOAD_ERR | CPU_TIMEOUT |
+					  ADC_TIMEOUT);
+	if (error)
+		return error;
+
+	/* controller CPU power on */
+	error = i2c_smbus_write_byte_data(client, SYSTEM,
+					  ANALOG_POWER_ON | CPU_POWER_ON);
+
+	enable_irq(client->irq);
+
+	return error;
+}
+
+static int rohm_ts_power_off(struct i2c_client *client)
+{
+	int error;
+
+	error = i2c_smbus_write_byte_data(client, SYSTEM,
+					  ANALOG_POWER_ON | CPU_POWER_OFF);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to power off device CPU: %d\n", error);
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, SYSTEM,
+					  ANALOG_POWER_OFF | CPU_POWER_OFF);
+	if (error)
+		dev_err(&client->dev,
+			"failed to power off the device: %d\n", error);
+
+	return error;
+}
+
+static int rohm_ts_open(struct input_dev *input_dev)
+{
+	struct rohm_ts_data *ts = input_get_drvdata(input_dev);
+	struct i2c_client *client = ts->client;
+	int error;
+
+	if (!ts->initialized) {
+		error = rohm_ts_device_init(client, ts->setup2);
+		if (error) {
+			dev_err(&client->dev,
+				"device initialization failed: %d\n", error);
+			return error;
+		}
+
+		ts->initialized = true;
+	}
+
+	return 0;
+}
+
+static void rohm_ts_close(struct input_dev *input_dev)
+{
+	struct rohm_ts_data *ts = input_get_drvdata(input_dev);
+
+	rohm_ts_power_off(ts->client);
+
+	ts->initialized = false;
+}
+
+static void rohm_ts_remove_sysfs_group(void *_dev)
+{
+	struct device *dev = _dev;
+
+	sysfs_remove_group(&dev->kobj, &rohm_ts_attr_group);
+}
+
+static int rohm_bu21023_i2c_probe(struct i2c_client *client,
+				  const struct i2c_device_id *id)
+{
+	struct device *dev = &client->dev;
+	struct rohm_ts_data *ts;
+	struct input_dev *input;
+	int error;
+
+	if (!client->irq) {
+		dev_err(dev, "IRQ is not assigned\n");
+		return -EINVAL;
+	}
+
+	if (!client->adapter->algo->master_xfer) {
+		dev_err(dev, "I2C level transfers not supported\n");
+		return -EOPNOTSUPP;
+	}
+
+	/* Turn off CPU just in case */
+	error = rohm_ts_power_off(client);
+	if (error)
+		return error;
+
+	ts = devm_kzalloc(dev, sizeof(struct rohm_ts_data), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->client = client;
+	ts->setup2 = MAF_1SAMPLE;
+	i2c_set_clientdata(client, ts);
+
+	input = devm_input_allocate_device(dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = BU21023_NAME;
+	input->id.bustype = BUS_I2C;
+	input->open = rohm_ts_open;
+	input->close = rohm_ts_close;
+
+	ts->input = input;
+	input_set_drvdata(input, ts);
+
+	input_set_abs_params(input, ABS_MT_POSITION_X,
+			     ROHM_TS_ABS_X_MIN, ROHM_TS_ABS_X_MAX, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y,
+			     ROHM_TS_ABS_Y_MIN, ROHM_TS_ABS_Y_MAX, 0, 0);
+
+	error = input_mt_init_slots(input, MAX_CONTACTS,
+				    INPUT_MT_DIRECT | INPUT_MT_TRACK |
+				    INPUT_MT_DROP_UNUSED);
+	if (error) {
+		dev_err(dev, "failed to multi touch slots initialization\n");
+		return error;
+	}
+
+	error = devm_request_threaded_irq(dev, client->irq,
+					  NULL, rohm_ts_soft_irq,
+					  IRQF_ONESHOT, client->name, ts);
+	if (error) {
+		dev_err(dev, "failed to request IRQ: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "failed to register input device: %d\n", error);
+		return error;
+	}
+
+	error = sysfs_create_group(&dev->kobj, &rohm_ts_attr_group);
+	if (error) {
+		dev_err(dev, "failed to create sysfs group: %d\n", error);
+		return error;
+	}
+
+	error = devm_add_action(dev, rohm_ts_remove_sysfs_group, dev);
+	if (error) {
+		rohm_ts_remove_sysfs_group(dev);
+		dev_err(&client->dev,
+			"Failed to add sysfs cleanup action: %d\n",
+			error);
+		return error;
+	}
+
+	return error;
+}
+
+static const struct i2c_device_id rohm_bu21023_i2c_id[] = {
+	{ BU21023_NAME, 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, rohm_bu21023_i2c_id);
+
+static struct i2c_driver rohm_bu21023_i2c_driver = {
+	.driver = {
+		.name = BU21023_NAME,
+	},
+	.probe = rohm_bu21023_i2c_probe,
+	.id_table = rohm_bu21023_i2c_id,
+};
+module_i2c_driver(rohm_bu21023_i2c_driver);
+
+MODULE_DESCRIPTION("ROHM BU21023/24 Touchscreen driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("ROHM Co., Ltd.");
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
new file mode 100644
index 0000000..a4a103e
--- /dev/null
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -0,0 +1,439 @@
+/*
+ * Samsung S3C24XX touchscreen driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the term of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * Copyright 2008 Ben Dooks <ben-linux@fluff.org>
+ * Copyright 2009 Simtec Electronics <linux@simtec.co.uk>
+ *
+ * Additional work by Herbert Pötzl <herbert@13thfloor.at> and
+ * Harald Welte <laforge@openmoko.org>
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/gpio.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/adc.h>
+#include <plat/regs-adc.h>
+#include <linux/platform_data/touchscreen-s3c2410.h>
+
+#define TSC_SLEEP  (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
+
+#define INT_DOWN	(0)
+#define INT_UP		(1 << 8)
+
+#define WAIT4INT	(S3C2410_ADCTSC_YM_SEN | \
+			 S3C2410_ADCTSC_YP_SEN | \
+			 S3C2410_ADCTSC_XP_SEN | \
+			 S3C2410_ADCTSC_XY_PST(3))
+
+#define AUTOPST		(S3C2410_ADCTSC_YM_SEN | \
+			 S3C2410_ADCTSC_YP_SEN | \
+			 S3C2410_ADCTSC_XP_SEN | \
+			 S3C2410_ADCTSC_AUTO_PST | \
+			 S3C2410_ADCTSC_XY_PST(0))
+
+#define FEAT_PEN_IRQ	(1 << 0)	/* HAS ADCCLRINTPNDNUP */
+
+/* Per-touchscreen data. */
+
+/**
+ * struct s3c2410ts - driver touchscreen state.
+ * @client: The ADC client we registered with the core driver.
+ * @dev: The device we are bound to.
+ * @input: The input device we registered with the input subsystem.
+ * @clock: The clock for the adc.
+ * @io: Pointer to the IO base.
+ * @xp: The accumulated X position data.
+ * @yp: The accumulated Y position data.
+ * @irq_tc: The interrupt number for pen up/down interrupt
+ * @count: The number of samples collected.
+ * @shift: The log2 of the maximum count to read in one go.
+ * @features: The features supported by the TSADC MOdule.
+ */
+struct s3c2410ts {
+	struct s3c_adc_client *client;
+	struct device *dev;
+	struct input_dev *input;
+	struct clk *clock;
+	void __iomem *io;
+	unsigned long xp;
+	unsigned long yp;
+	int irq_tc;
+	int count;
+	int shift;
+	int features;
+};
+
+static struct s3c2410ts ts;
+
+/**
+ * get_down - return the down state of the pen
+ * @data0: The data read from ADCDAT0 register.
+ * @data1: The data read from ADCDAT1 register.
+ *
+ * Return non-zero if both readings show that the pen is down.
+ */
+static inline bool get_down(unsigned long data0, unsigned long data1)
+{
+	/* returns true if both data values show stylus down */
+	return (!(data0 & S3C2410_ADCDAT0_UPDOWN) &&
+		!(data1 & S3C2410_ADCDAT0_UPDOWN));
+}
+
+static void touch_timer_fire(unsigned long data)
+{
+	unsigned long data0;
+	unsigned long data1;
+	bool down;
+
+	data0 = readl(ts.io + S3C2410_ADCDAT0);
+	data1 = readl(ts.io + S3C2410_ADCDAT1);
+
+	down = get_down(data0, data1);
+
+	if (down) {
+		if (ts.count == (1 << ts.shift)) {
+			ts.xp >>= ts.shift;
+			ts.yp >>= ts.shift;
+
+			dev_dbg(ts.dev, "%s: X=%lu, Y=%lu, count=%d\n",
+				__func__, ts.xp, ts.yp, ts.count);
+
+			input_report_abs(ts.input, ABS_X, ts.xp);
+			input_report_abs(ts.input, ABS_Y, ts.yp);
+
+			input_report_key(ts.input, BTN_TOUCH, 1);
+			input_sync(ts.input);
+
+			ts.xp = 0;
+			ts.yp = 0;
+			ts.count = 0;
+		}
+
+		s3c_adc_start(ts.client, 0, 1 << ts.shift);
+	} else {
+		ts.xp = 0;
+		ts.yp = 0;
+		ts.count = 0;
+
+		input_report_key(ts.input, BTN_TOUCH, 0);
+		input_sync(ts.input);
+
+		writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);
+	}
+}
+
+static DEFINE_TIMER(touch_timer, touch_timer_fire, 0, 0);
+
+/**
+ * stylus_irq - touchscreen stylus event interrupt
+ * @irq: The interrupt number
+ * @dev_id: The device ID.
+ *
+ * Called when the IRQ_TC is fired for a pen up or down event.
+ */
+static irqreturn_t stylus_irq(int irq, void *dev_id)
+{
+	unsigned long data0;
+	unsigned long data1;
+	bool down;
+
+	data0 = readl(ts.io + S3C2410_ADCDAT0);
+	data1 = readl(ts.io + S3C2410_ADCDAT1);
+
+	down = get_down(data0, data1);
+
+	/* TODO we should never get an interrupt with down set while
+	 * the timer is running, but maybe we ought to verify that the
+	 * timer isn't running anyways. */
+
+	if (down)
+		s3c_adc_start(ts.client, 0, 1 << ts.shift);
+	else
+		dev_dbg(ts.dev, "%s: count=%d\n", __func__, ts.count);
+
+	if (ts.features & FEAT_PEN_IRQ) {
+		/* Clear pen down/up interrupt */
+		writel(0x0, ts.io + S3C64XX_ADCCLRINTPNDNUP);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/**
+ * s3c24xx_ts_conversion - ADC conversion callback
+ * @client: The client that was registered with the ADC core.
+ * @data0: The reading from ADCDAT0.
+ * @data1: The reading from ADCDAT1.
+ * @left: The number of samples left.
+ *
+ * Called when a conversion has finished.
+ */
+static void s3c24xx_ts_conversion(struct s3c_adc_client *client,
+				  unsigned data0, unsigned data1,
+				  unsigned *left)
+{
+	dev_dbg(ts.dev, "%s: %d,%d\n", __func__, data0, data1);
+
+	ts.xp += data0;
+	ts.yp += data1;
+
+	ts.count++;
+
+	/* From tests, it seems that it is unlikely to get a pen-up
+	 * event during the conversion process which means we can
+	 * ignore any pen-up events with less than the requisite
+	 * count done.
+	 *
+	 * In several thousand conversions, no pen-ups where detected
+	 * before count completed.
+	 */
+}
+
+/**
+ * s3c24xx_ts_select - ADC selection callback.
+ * @client: The client that was registered with the ADC core.
+ * @select: The reason for select.
+ *
+ * Called when the ADC core selects (or deslects) us as a client.
+ */
+static void s3c24xx_ts_select(struct s3c_adc_client *client, unsigned select)
+{
+	if (select) {
+		writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+		       ts.io + S3C2410_ADCTSC);
+	} else {
+		mod_timer(&touch_timer, jiffies+1);
+		writel(WAIT4INT | INT_UP, ts.io + S3C2410_ADCTSC);
+	}
+}
+
+/**
+ * s3c2410ts_probe - device core probe entry point
+ * @pdev: The device we are being bound to.
+ *
+ * Initialise, find and allocate any resources we need to run and then
+ * register with the ADC and input systems.
+ */
+static int s3c2410ts_probe(struct platform_device *pdev)
+{
+	struct s3c2410_ts_mach_info *info;
+	struct device *dev = &pdev->dev;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int ret = -EINVAL;
+
+	/* Initialise input stuff */
+	memset(&ts, 0, sizeof(struct s3c2410ts));
+
+	ts.dev = dev;
+
+	info = dev_get_platdata(&pdev->dev);
+	if (!info) {
+		dev_err(dev, "no platform data, cannot attach\n");
+		return -EINVAL;
+	}
+
+	dev_dbg(dev, "initialising touchscreen\n");
+
+	ts.clock = clk_get(dev, "adc");
+	if (IS_ERR(ts.clock)) {
+		dev_err(dev, "cannot get adc clock source\n");
+		return -ENOENT;
+	}
+
+	clk_prepare_enable(ts.clock);
+	dev_dbg(dev, "got and enabled clocks\n");
+
+	ts.irq_tc = ret = platform_get_irq(pdev, 0);
+	if (ret < 0) {
+		dev_err(dev, "no resource for interrupt\n");
+		goto err_clk;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "no resource for registers\n");
+		ret = -ENOENT;
+		goto err_clk;
+	}
+
+	ts.io = ioremap(res->start, resource_size(res));
+	if (ts.io == NULL) {
+		dev_err(dev, "cannot map registers\n");
+		ret = -ENOMEM;
+		goto err_clk;
+	}
+
+	/* inititalise the gpio */
+	if (info->cfg_gpio)
+		info->cfg_gpio(to_platform_device(ts.dev));
+
+	ts.client = s3c_adc_register(pdev, s3c24xx_ts_select,
+				     s3c24xx_ts_conversion, 1);
+	if (IS_ERR(ts.client)) {
+		dev_err(dev, "failed to register adc client\n");
+		ret = PTR_ERR(ts.client);
+		goto err_iomap;
+	}
+
+	/* Initialise registers */
+	if ((info->delay & 0xffff) > 0)
+		writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY);
+
+	writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);
+
+	input_dev = input_allocate_device();
+	if (!input_dev) {
+		dev_err(dev, "Unable to allocate the input device !!\n");
+		ret = -ENOMEM;
+		goto err_iomap;
+	}
+
+	ts.input = input_dev;
+	ts.input->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	ts.input->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(ts.input, ABS_X, 0, 0x3FF, 0, 0);
+	input_set_abs_params(ts.input, ABS_Y, 0, 0x3FF, 0, 0);
+
+	ts.input->name = "S3C24XX TouchScreen";
+	ts.input->id.bustype = BUS_HOST;
+	ts.input->id.vendor = 0xDEAD;
+	ts.input->id.product = 0xBEEF;
+	ts.input->id.version = 0x0102;
+
+	ts.shift = info->oversampling_shift;
+	ts.features = platform_get_device_id(pdev)->driver_data;
+
+	ret = request_irq(ts.irq_tc, stylus_irq, 0,
+			  "s3c2410_ts_pen", ts.input);
+	if (ret) {
+		dev_err(dev, "cannot get TC interrupt\n");
+		goto err_inputdev;
+	}
+
+	dev_info(dev, "driver attached, registering input device\n");
+
+	/* All went ok, so register to the input system */
+	ret = input_register_device(ts.input);
+	if (ret < 0) {
+		dev_err(dev, "failed to register input device\n");
+		ret = -EIO;
+		goto err_tcirq;
+	}
+
+	return 0;
+
+ err_tcirq:
+	free_irq(ts.irq_tc, ts.input);
+ err_inputdev:
+	input_free_device(ts.input);
+ err_iomap:
+	iounmap(ts.io);
+ err_clk:
+	del_timer_sync(&touch_timer);
+	clk_put(ts.clock);
+	return ret;
+}
+
+/**
+ * s3c2410ts_remove - device core removal entry point
+ * @pdev: The device we are being removed from.
+ *
+ * Free up our state ready to be removed.
+ */
+static int s3c2410ts_remove(struct platform_device *pdev)
+{
+	free_irq(ts.irq_tc, ts.input);
+	del_timer_sync(&touch_timer);
+
+	clk_disable_unprepare(ts.clock);
+	clk_put(ts.clock);
+
+	input_unregister_device(ts.input);
+	iounmap(ts.io);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int s3c2410ts_suspend(struct device *dev)
+{
+	writel(TSC_SLEEP, ts.io + S3C2410_ADCTSC);
+	disable_irq(ts.irq_tc);
+	clk_disable(ts.clock);
+
+	return 0;
+}
+
+static int s3c2410ts_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct s3c2410_ts_mach_info *info = dev_get_platdata(&pdev->dev);
+
+	clk_enable(ts.clock);
+	enable_irq(ts.irq_tc);
+
+	/* Initialise registers */
+	if ((info->delay & 0xffff) > 0)
+		writel(info->delay & 0xffff, ts.io + S3C2410_ADCDLY);
+
+	writel(WAIT4INT | INT_DOWN, ts.io + S3C2410_ADCTSC);
+
+	return 0;
+}
+
+static const struct dev_pm_ops s3c_ts_pmops = {
+	.suspend	= s3c2410ts_suspend,
+	.resume		= s3c2410ts_resume,
+};
+#endif
+
+static const struct platform_device_id s3cts_driver_ids[] = {
+	{ "s3c2410-ts", 0 },
+	{ "s3c2440-ts", 0 },
+	{ "s3c64xx-ts", FEAT_PEN_IRQ },
+	{ }
+};
+MODULE_DEVICE_TABLE(platform, s3cts_driver_ids);
+
+static struct platform_driver s3c_ts_driver = {
+	.driver         = {
+		.name   = "samsung-ts",
+#ifdef CONFIG_PM
+		.pm	= &s3c_ts_pmops,
+#endif
+	},
+	.id_table	= s3cts_driver_ids,
+	.probe		= s3c2410ts_probe,
+	.remove		= s3c2410ts_remove,
+};
+module_platform_driver(s3c_ts_driver);
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>, "
+	      "Ben Dooks <ben@simtec.co.uk>, "
+	      "Simtec Electronics <linux@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C24XX Touchscreen driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/st1232.c b/drivers/input/touchscreen/st1232.c
new file mode 100644
index 0000000..e943678
--- /dev/null
+++ b/drivers/input/touchscreen/st1232.c
@@ -0,0 +1,308 @@
+/*
+ * ST1232 Touchscreen Controller Driver
+ *
+ * Copyright (C) 2010 Renesas Solutions Corp.
+ *	Tony SIM <chinyeow.sim.xt@renesas.com>
+ *
+ * Using code from:
+ *  - android.git.kernel.org: projects/kernel/common.git: synaptics_i2c_rmi.c
+ *	Copyright (C) 2007 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+#include <linux/pm_qos.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/platform_data/st1232_pdata.h>
+
+#define ST1232_TS_NAME	"st1232-ts"
+
+#define MIN_X		0x00
+#define MIN_Y		0x00
+#define MAX_X		0x31f	/* (800 - 1) */
+#define MAX_Y		0x1df	/* (480 - 1) */
+#define MAX_AREA	0xff
+#define MAX_FINGERS	2
+
+struct st1232_ts_finger {
+	u16 x;
+	u16 y;
+	u8 t;
+	bool is_valid;
+};
+
+struct st1232_ts_data {
+	struct i2c_client *client;
+	struct input_dev *input_dev;
+	struct st1232_ts_finger finger[MAX_FINGERS];
+	struct dev_pm_qos_request low_latency_req;
+	int reset_gpio;
+};
+
+static int st1232_ts_read_data(struct st1232_ts_data *ts)
+{
+	struct st1232_ts_finger *finger = ts->finger;
+	struct i2c_client *client = ts->client;
+	struct i2c_msg msg[2];
+	int error;
+	u8 start_reg;
+	u8 buf[10];
+
+	/* read touchscreen data from ST1232 */
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].len = 1;
+	msg[0].buf = &start_reg;
+	start_reg = 0x10;
+
+	msg[1].addr = ts->client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].len = sizeof(buf);
+	msg[1].buf = buf;
+
+	error = i2c_transfer(client->adapter, msg, 2);
+	if (error < 0)
+		return error;
+
+	/* get "valid" bits */
+	finger[0].is_valid = buf[2] >> 7;
+	finger[1].is_valid = buf[5] >> 7;
+
+	/* get xy coordinate */
+	if (finger[0].is_valid) {
+		finger[0].x = ((buf[2] & 0x0070) << 4) | buf[3];
+		finger[0].y = ((buf[2] & 0x0007) << 8) | buf[4];
+		finger[0].t = buf[8];
+	}
+
+	if (finger[1].is_valid) {
+		finger[1].x = ((buf[5] & 0x0070) << 4) | buf[6];
+		finger[1].y = ((buf[5] & 0x0007) << 8) | buf[7];
+		finger[1].t = buf[9];
+	}
+
+	return 0;
+}
+
+static irqreturn_t st1232_ts_irq_handler(int irq, void *dev_id)
+{
+	struct st1232_ts_data *ts = dev_id;
+	struct st1232_ts_finger *finger = ts->finger;
+	struct input_dev *input_dev = ts->input_dev;
+	int count = 0;
+	int i, ret;
+
+	ret = st1232_ts_read_data(ts);
+	if (ret < 0)
+		goto end;
+
+	/* multi touch protocol */
+	for (i = 0; i < MAX_FINGERS; i++) {
+		if (!finger[i].is_valid)
+			continue;
+
+		input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, finger[i].t);
+		input_report_abs(input_dev, ABS_MT_POSITION_X, finger[i].x);
+		input_report_abs(input_dev, ABS_MT_POSITION_Y, finger[i].y);
+		input_mt_sync(input_dev);
+		count++;
+	}
+
+	/* SYN_MT_REPORT only if no contact */
+	if (!count) {
+		input_mt_sync(input_dev);
+		if (ts->low_latency_req.dev) {
+			dev_pm_qos_remove_request(&ts->low_latency_req);
+			ts->low_latency_req.dev = NULL;
+		}
+	} else if (!ts->low_latency_req.dev) {
+		/* First contact, request 100 us latency. */
+		dev_pm_qos_add_ancestor_request(&ts->client->dev,
+						&ts->low_latency_req,
+						DEV_PM_QOS_RESUME_LATENCY, 100);
+	}
+
+	/* SYN_REPORT */
+	input_sync(input_dev);
+
+end:
+	return IRQ_HANDLED;
+}
+
+static void st1232_ts_power(struct st1232_ts_data *ts, bool poweron)
+{
+	if (gpio_is_valid(ts->reset_gpio))
+		gpio_direction_output(ts->reset_gpio, poweron);
+}
+
+static int st1232_ts_probe(struct i2c_client *client,
+					const struct i2c_device_id *id)
+{
+	struct st1232_ts_data *ts;
+	struct st1232_pdata *pdata = dev_get_platdata(&client->dev);
+	struct input_dev *input_dev;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "need I2C_FUNC_I2C\n");
+		return -EIO;
+	}
+
+	if (!client->irq) {
+		dev_err(&client->dev, "no IRQ?\n");
+		return -EINVAL;
+	}
+
+	ts = devm_kzalloc(&client->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev)
+		return -ENOMEM;
+
+	ts->client = client;
+	ts->input_dev = input_dev;
+
+	if (pdata)
+		ts->reset_gpio = pdata->reset_gpio;
+	else if (client->dev.of_node)
+		ts->reset_gpio = of_get_gpio(client->dev.of_node, 0);
+	else
+		ts->reset_gpio = -ENODEV;
+
+	if (gpio_is_valid(ts->reset_gpio)) {
+		error = devm_gpio_request(&client->dev, ts->reset_gpio, NULL);
+		if (error) {
+			dev_err(&client->dev,
+				"Unable to request GPIO pin %d.\n",
+				ts->reset_gpio);
+				return error;
+		}
+	}
+
+	st1232_ts_power(ts, true);
+
+	input_dev->name = "st1232-touchscreen";
+	input_dev->id.bustype = BUS_I2C;
+	input_dev->dev.parent = &client->dev;
+
+	__set_bit(EV_SYN, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X, MIN_X, MAX_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, MIN_Y, MAX_Y, 0, 0);
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, st1232_ts_irq_handler,
+					  IRQF_ONESHOT,
+					  client->name, ts);
+	if (error) {
+		dev_err(&client->dev, "Failed to register interrupt\n");
+		return error;
+	}
+
+	error = input_register_device(ts->input_dev);
+	if (error) {
+		dev_err(&client->dev, "Unable to register %s input device\n",
+			input_dev->name);
+		return error;
+	}
+
+	i2c_set_clientdata(client, ts);
+	device_init_wakeup(&client->dev, 1);
+
+	return 0;
+}
+
+static int st1232_ts_remove(struct i2c_client *client)
+{
+	struct st1232_ts_data *ts = i2c_get_clientdata(client);
+
+	device_init_wakeup(&client->dev, 0);
+	st1232_ts_power(ts, false);
+
+	return 0;
+}
+
+static int __maybe_unused st1232_ts_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct st1232_ts_data *ts = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev)) {
+		enable_irq_wake(client->irq);
+	} else {
+		disable_irq(client->irq);
+		st1232_ts_power(ts, false);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused st1232_ts_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct st1232_ts_data *ts = i2c_get_clientdata(client);
+
+	if (device_may_wakeup(&client->dev)) {
+		disable_irq_wake(client->irq);
+	} else {
+		st1232_ts_power(ts, true);
+		enable_irq(client->irq);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(st1232_ts_pm_ops,
+			 st1232_ts_suspend, st1232_ts_resume);
+
+static const struct i2c_device_id st1232_ts_id[] = {
+	{ ST1232_TS_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, st1232_ts_id);
+
+#ifdef CONFIG_OF
+static const struct of_device_id st1232_ts_dt_ids[] = {
+	{ .compatible = "sitronix,st1232", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, st1232_ts_dt_ids);
+#endif
+
+static struct i2c_driver st1232_ts_driver = {
+	.probe		= st1232_ts_probe,
+	.remove		= st1232_ts_remove,
+	.id_table	= st1232_ts_id,
+	.driver = {
+		.name	= ST1232_TS_NAME,
+		.of_match_table = of_match_ptr(st1232_ts_dt_ids),
+		.pm	= &st1232_ts_pm_ops,
+	},
+};
+
+module_i2c_driver(st1232_ts_driver);
+
+MODULE_AUTHOR("Tony SIM <chinyeow.sim.xt@renesas.com>");
+MODULE_DESCRIPTION("SITRONIX ST1232 Touchscreen Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c
new file mode 100644
index 0000000..e414d43
--- /dev/null
+++ b/drivers/input/touchscreen/stmpe-ts.c
@@ -0,0 +1,385 @@
+/*
+ * STMicroelectronics STMPE811 Touchscreen Driver
+ *
+ * (C) 2010 Luotao Fu <l.fu@pengutronix.de>
+ * All rights reserved.
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/workqueue.h>
+
+#include <linux/mfd/stmpe.h>
+
+/* Register layouts and functionalities are identical on all stmpexxx variants
+ * with touchscreen controller
+ */
+#define STMPE_REG_INT_STA		0x0B
+#define STMPE_REG_ADC_CTRL1		0x20
+#define STMPE_REG_ADC_CTRL2		0x21
+#define STMPE_REG_TSC_CTRL		0x40
+#define STMPE_REG_TSC_CFG		0x41
+#define STMPE_REG_FIFO_TH		0x4A
+#define STMPE_REG_FIFO_STA		0x4B
+#define STMPE_REG_FIFO_SIZE		0x4C
+#define STMPE_REG_TSC_DATA_XYZ		0x52
+#define STMPE_REG_TSC_FRACTION_Z	0x56
+#define STMPE_REG_TSC_I_DRIVE		0x58
+
+#define OP_MOD_XYZ			0
+
+#define STMPE_TSC_CTRL_TSC_EN		(1<<0)
+
+#define STMPE_FIFO_STA_RESET		(1<<0)
+
+#define STMPE_IRQ_TOUCH_DET		0
+
+#define SAMPLE_TIME(x)			((x & 0xf) << 4)
+#define MOD_12B(x)			((x & 0x1) << 3)
+#define REF_SEL(x)			((x & 0x1) << 1)
+#define ADC_FREQ(x)			(x & 0x3)
+#define AVE_CTRL(x)			((x & 0x3) << 6)
+#define DET_DELAY(x)			((x & 0x7) << 3)
+#define SETTLING(x)			(x & 0x7)
+#define FRACTION_Z(x)			(x & 0x7)
+#define I_DRIVE(x)			(x & 0x1)
+#define OP_MODE(x)			((x & 0x7) << 1)
+
+#define STMPE_TS_NAME			"stmpe-ts"
+#define XY_MASK				0xfff
+
+struct stmpe_touch {
+	struct stmpe *stmpe;
+	struct input_dev *idev;
+	struct delayed_work work;
+	struct device *dev;
+	u8 sample_time;
+	u8 mod_12b;
+	u8 ref_sel;
+	u8 adc_freq;
+	u8 ave_ctrl;
+	u8 touch_det_delay;
+	u8 settling;
+	u8 fraction_z;
+	u8 i_drive;
+};
+
+static int __stmpe_reset_fifo(struct stmpe *stmpe)
+{
+	int ret;
+
+	ret = stmpe_set_bits(stmpe, STMPE_REG_FIFO_STA,
+			STMPE_FIFO_STA_RESET, STMPE_FIFO_STA_RESET);
+	if (ret)
+		return ret;
+
+	return stmpe_set_bits(stmpe, STMPE_REG_FIFO_STA,
+			STMPE_FIFO_STA_RESET, 0);
+}
+
+static void stmpe_work(struct work_struct *work)
+{
+	int int_sta;
+	u32 timeout = 40;
+
+	struct stmpe_touch *ts =
+	    container_of(work, struct stmpe_touch, work.work);
+
+	int_sta = stmpe_reg_read(ts->stmpe, STMPE_REG_INT_STA);
+
+	/*
+	 * touch_det sometimes get desasserted or just get stuck. This appears
+	 * to be a silicon bug, We still have to clearify this with the
+	 * manufacture. As a workaround We release the key anyway if the
+	 * touch_det keeps coming in after 4ms, while the FIFO contains no value
+	 * during the whole time.
+	 */
+	while ((int_sta & (1 << STMPE_IRQ_TOUCH_DET)) && (timeout > 0)) {
+		timeout--;
+		int_sta = stmpe_reg_read(ts->stmpe, STMPE_REG_INT_STA);
+		udelay(100);
+	}
+
+	/* reset the FIFO before we report release event */
+	__stmpe_reset_fifo(ts->stmpe);
+
+	input_report_abs(ts->idev, ABS_PRESSURE, 0);
+	input_report_key(ts->idev, BTN_TOUCH, 0);
+	input_sync(ts->idev);
+}
+
+static irqreturn_t stmpe_ts_handler(int irq, void *data)
+{
+	u8 data_set[4];
+	int x, y, z;
+	struct stmpe_touch *ts = data;
+
+	/*
+	 * Cancel scheduled polling for release if we have new value
+	 * available. Wait if the polling is already running.
+	 */
+	cancel_delayed_work_sync(&ts->work);
+
+	/*
+	 * The FIFO sometimes just crashes and stops generating interrupts. This
+	 * appears to be a silicon bug. We still have to clearify this with
+	 * the manufacture. As a workaround we disable the TSC while we are
+	 * collecting data and flush the FIFO after reading
+	 */
+	stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL,
+				STMPE_TSC_CTRL_TSC_EN, 0);
+
+	stmpe_block_read(ts->stmpe, STMPE_REG_TSC_DATA_XYZ, 4, data_set);
+
+	x = (data_set[0] << 4) | (data_set[1] >> 4);
+	y = ((data_set[1] & 0xf) << 8) | data_set[2];
+	z = data_set[3];
+
+	input_report_abs(ts->idev, ABS_X, x);
+	input_report_abs(ts->idev, ABS_Y, y);
+	input_report_abs(ts->idev, ABS_PRESSURE, z);
+	input_report_key(ts->idev, BTN_TOUCH, 1);
+	input_sync(ts->idev);
+
+       /* flush the FIFO after we have read out our values. */
+	__stmpe_reset_fifo(ts->stmpe);
+
+	/* reenable the tsc */
+	stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL,
+			STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN);
+
+	/* start polling for touch_det to detect release */
+	schedule_delayed_work(&ts->work, msecs_to_jiffies(50));
+
+	return IRQ_HANDLED;
+}
+
+static int stmpe_init_hw(struct stmpe_touch *ts)
+{
+	int ret;
+	u8 adc_ctrl1, adc_ctrl1_mask, tsc_cfg, tsc_cfg_mask;
+	struct stmpe *stmpe = ts->stmpe;
+	struct device *dev = ts->dev;
+
+	ret = stmpe_enable(stmpe, STMPE_BLOCK_TOUCHSCREEN | STMPE_BLOCK_ADC);
+	if (ret) {
+		dev_err(dev, "Could not enable clock for ADC and TS\n");
+		return ret;
+	}
+
+	adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) |
+		REF_SEL(ts->ref_sel);
+	adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff);
+
+	ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1,
+			adc_ctrl1_mask, adc_ctrl1);
+	if (ret) {
+		dev_err(dev, "Could not setup ADC\n");
+		return ret;
+	}
+
+	ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2,
+			ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq));
+	if (ret) {
+		dev_err(dev, "Could not setup ADC\n");
+		return ret;
+	}
+
+	tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) |
+			SETTLING(ts->settling);
+	tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff);
+
+	ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg);
+	if (ret) {
+		dev_err(dev, "Could not config touch\n");
+		return ret;
+	}
+
+	ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z,
+			FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z));
+	if (ret) {
+		dev_err(dev, "Could not config touch\n");
+		return ret;
+	}
+
+	ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE,
+			I_DRIVE(0xff), I_DRIVE(ts->i_drive));
+	if (ret) {
+		dev_err(dev, "Could not config touch\n");
+		return ret;
+	}
+
+	/* set FIFO to 1 for single point reading */
+	ret = stmpe_reg_write(stmpe, STMPE_REG_FIFO_TH, 1);
+	if (ret) {
+		dev_err(dev, "Could not set FIFO\n");
+		return ret;
+	}
+
+	ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL,
+			OP_MODE(0xff), OP_MODE(OP_MOD_XYZ));
+	if (ret) {
+		dev_err(dev, "Could not set mode\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int stmpe_ts_open(struct input_dev *dev)
+{
+	struct stmpe_touch *ts = input_get_drvdata(dev);
+	int ret = 0;
+
+	ret = __stmpe_reset_fifo(ts->stmpe);
+	if (ret)
+		return ret;
+
+	return stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL,
+			STMPE_TSC_CTRL_TSC_EN, STMPE_TSC_CTRL_TSC_EN);
+}
+
+static void stmpe_ts_close(struct input_dev *dev)
+{
+	struct stmpe_touch *ts = input_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&ts->work);
+
+	stmpe_set_bits(ts->stmpe, STMPE_REG_TSC_CTRL,
+			STMPE_TSC_CTRL_TSC_EN, 0);
+}
+
+static void stmpe_ts_get_platform_info(struct platform_device *pdev,
+					struct stmpe_touch *ts)
+{
+	struct device_node *np = pdev->dev.of_node;
+	u32 val;
+
+	if (np) {
+		if (!of_property_read_u32(np, "st,sample-time", &val))
+			ts->sample_time = val;
+		if (!of_property_read_u32(np, "st,mod-12b", &val))
+			ts->mod_12b = val;
+		if (!of_property_read_u32(np, "st,ref-sel", &val))
+			ts->ref_sel = val;
+		if (!of_property_read_u32(np, "st,adc-freq", &val))
+			ts->adc_freq = val;
+		if (!of_property_read_u32(np, "st,ave-ctrl", &val))
+			ts->ave_ctrl = val;
+		if (!of_property_read_u32(np, "st,touch-det-delay", &val))
+			ts->touch_det_delay = val;
+		if (!of_property_read_u32(np, "st,settling", &val))
+			ts->settling = val;
+		if (!of_property_read_u32(np, "st,fraction-z", &val))
+			ts->fraction_z = val;
+		if (!of_property_read_u32(np, "st,i-drive", &val))
+			ts->i_drive = val;
+	}
+}
+
+static int stmpe_input_probe(struct platform_device *pdev)
+{
+	struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent);
+	struct stmpe_touch *ts;
+	struct input_dev *idev;
+	int error;
+	int ts_irq;
+
+	ts_irq = platform_get_irq_byname(pdev, "FIFO_TH");
+	if (ts_irq < 0)
+		return ts_irq;
+
+	ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	idev = devm_input_allocate_device(&pdev->dev);
+	if (!idev)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, ts);
+	ts->stmpe = stmpe;
+	ts->idev = idev;
+	ts->dev = &pdev->dev;
+
+	stmpe_ts_get_platform_info(pdev, ts);
+
+	INIT_DELAYED_WORK(&ts->work, stmpe_work);
+
+	error = devm_request_threaded_irq(&pdev->dev, ts_irq,
+					  NULL, stmpe_ts_handler,
+					  IRQF_ONESHOT, STMPE_TS_NAME, ts);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request IRQ %d\n", ts_irq);
+		return error;
+	}
+
+	error = stmpe_init_hw(ts);
+	if (error)
+		return error;
+
+	idev->name = STMPE_TS_NAME;
+	idev->phys = STMPE_TS_NAME"/input0";
+	idev->id.bustype = BUS_I2C;
+
+	idev->open = stmpe_ts_open;
+	idev->close = stmpe_ts_close;
+
+	input_set_drvdata(idev, ts);
+
+	input_set_capability(idev, EV_KEY, BTN_TOUCH);
+	input_set_abs_params(idev, ABS_X, 0, XY_MASK, 0, 0);
+	input_set_abs_params(idev, ABS_Y, 0, XY_MASK, 0, 0);
+	input_set_abs_params(idev, ABS_PRESSURE, 0x0, 0xff, 0, 0);
+
+	error = input_register_device(idev);
+	if (error) {
+		dev_err(&pdev->dev, "Could not register input device\n");
+		return error;
+	}
+
+	return 0;
+}
+
+static int stmpe_ts_remove(struct platform_device *pdev)
+{
+	struct stmpe_touch *ts = platform_get_drvdata(pdev);
+
+	stmpe_disable(ts->stmpe, STMPE_BLOCK_TOUCHSCREEN);
+
+	return 0;
+}
+
+static struct platform_driver stmpe_ts_driver = {
+	.driver = {
+		.name = STMPE_TS_NAME,
+	},
+	.probe = stmpe_input_probe,
+	.remove = stmpe_ts_remove,
+};
+module_platform_driver(stmpe_ts_driver);
+
+static const struct of_device_id stmpe_ts_ids[] = {
+	{ .compatible = "st,stmpe-ts", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, stmpe_ts_ids);
+
+MODULE_AUTHOR("Luotao Fu <l.fu@pengutronix.de>");
+MODULE_DESCRIPTION("STMPEXXX touchscreen driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/sun4i-ts.c b/drivers/input/touchscreen/sun4i-ts.c
new file mode 100644
index 0000000..4857943
--- /dev/null
+++ b/drivers/input/touchscreen/sun4i-ts.c
@@ -0,0 +1,426 @@
+/*
+ * Allwinner sunxi resistive touchscreen controller driver
+ *
+ * Copyright (C) 2013 - 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * The hwmon parts are based on work by Corentin LABBE which is:
+ * Copyright (C) 2013 Corentin LABBE <clabbe.montjoie@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * The sun4i-ts controller is capable of detecting a second touch, but when a
+ * second touch is present then the accuracy becomes so bad the reported touch
+ * location is not useable.
+ *
+ * The original android driver contains some complicated heuristics using the
+ * aprox. distance between the 2 touches to see if the user is making a pinch
+ * open / close movement, and then reports emulated multi-touch events around
+ * the last touch coordinate (as the dual-touch coordinates are worthless).
+ *
+ * These kinds of heuristics are just asking for trouble (and don't belong
+ * in the kernel). So this driver offers straight forward, reliable single
+ * touch functionality only.
+ *
+ * s.a. A20 User Manual "1.15 TP" (Documentation/arm/sunxi/README)
+ * (looks like the description in the A20 User Manual v1.3 is better
+ * than the one in the A10 User Manual v.1.5)
+ */
+
+#include <linux/err.h>
+#include <linux/hwmon.h>
+#include <linux/thermal.h>
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define TP_CTRL0		0x00
+#define TP_CTRL1		0x04
+#define TP_CTRL2		0x08
+#define TP_CTRL3		0x0c
+#define TP_INT_FIFOC		0x10
+#define TP_INT_FIFOS		0x14
+#define TP_TPR			0x18
+#define TP_CDAT			0x1c
+#define TEMP_DATA		0x20
+#define TP_DATA			0x24
+
+/* TP_CTRL0 bits */
+#define ADC_FIRST_DLY(x)	((x) << 24) /* 8 bits */
+#define ADC_FIRST_DLY_MODE(x)	((x) << 23)
+#define ADC_CLK_SEL(x)		((x) << 22)
+#define ADC_CLK_DIV(x)		((x) << 20) /* 3 bits */
+#define FS_DIV(x)		((x) << 16) /* 4 bits */
+#define T_ACQ(x)		((x) << 0) /* 16 bits */
+
+/* TP_CTRL1 bits */
+#define STYLUS_UP_DEBOUN(x)	((x) << 12) /* 8 bits */
+#define STYLUS_UP_DEBOUN_EN(x)	((x) << 9)
+#define TOUCH_PAN_CALI_EN(x)	((x) << 6)
+#define TP_DUAL_EN(x)		((x) << 5)
+#define TP_MODE_EN(x)		((x) << 4)
+#define TP_ADC_SELECT(x)	((x) << 3)
+#define ADC_CHAN_SELECT(x)	((x) << 0)  /* 3 bits */
+
+/* on sun6i, bits 3~6 are left shifted by 1 to 4~7 */
+#define SUN6I_TP_MODE_EN(x)	((x) << 5)
+
+/* TP_CTRL2 bits */
+#define TP_SENSITIVE_ADJUST(x)	((x) << 28) /* 4 bits */
+#define TP_MODE_SELECT(x)	((x) << 26) /* 2 bits */
+#define PRE_MEA_EN(x)		((x) << 24)
+#define PRE_MEA_THRE_CNT(x)	((x) << 0) /* 24 bits */
+
+/* TP_CTRL3 bits */
+#define FILTER_EN(x)		((x) << 2)
+#define FILTER_TYPE(x)		((x) << 0)  /* 2 bits */
+
+/* TP_INT_FIFOC irq and fifo mask / control bits */
+#define TEMP_IRQ_EN(x)		((x) << 18)
+#define OVERRUN_IRQ_EN(x)	((x) << 17)
+#define DATA_IRQ_EN(x)		((x) << 16)
+#define TP_DATA_XY_CHANGE(x)	((x) << 13)
+#define FIFO_TRIG(x)		((x) << 8)  /* 5 bits */
+#define DATA_DRQ_EN(x)		((x) << 7)
+#define FIFO_FLUSH(x)		((x) << 4)
+#define TP_UP_IRQ_EN(x)		((x) << 1)
+#define TP_DOWN_IRQ_EN(x)	((x) << 0)
+
+/* TP_INT_FIFOS irq and fifo status bits */
+#define TEMP_DATA_PENDING	BIT(18)
+#define FIFO_OVERRUN_PENDING	BIT(17)
+#define FIFO_DATA_PENDING	BIT(16)
+#define TP_IDLE_FLG		BIT(2)
+#define TP_UP_PENDING		BIT(1)
+#define TP_DOWN_PENDING		BIT(0)
+
+/* TP_TPR bits */
+#define TEMP_ENABLE(x)		((x) << 16)
+#define TEMP_PERIOD(x)		((x) << 0)  /* t = x * 256 * 16 / clkin */
+
+struct sun4i_ts_data {
+	struct device *dev;
+	struct input_dev *input;
+	struct thermal_zone_device *tz;
+	void __iomem *base;
+	unsigned int irq;
+	bool ignore_fifo_data;
+	int temp_data;
+	int temp_offset;
+	int temp_step;
+};
+
+static void sun4i_ts_irq_handle_input(struct sun4i_ts_data *ts, u32 reg_val)
+{
+	u32 x, y;
+
+	if (reg_val & FIFO_DATA_PENDING) {
+		x = readl(ts->base + TP_DATA);
+		y = readl(ts->base + TP_DATA);
+		/* The 1st location reported after an up event is unreliable */
+		if (!ts->ignore_fifo_data) {
+			input_report_abs(ts->input, ABS_X, x);
+			input_report_abs(ts->input, ABS_Y, y);
+			/*
+			 * The hardware has a separate down status bit, but
+			 * that gets set before we get the first location,
+			 * resulting in reporting a click on the old location.
+			 */
+			input_report_key(ts->input, BTN_TOUCH, 1);
+			input_sync(ts->input);
+		} else {
+			ts->ignore_fifo_data = false;
+		}
+	}
+
+	if (reg_val & TP_UP_PENDING) {
+		ts->ignore_fifo_data = true;
+		input_report_key(ts->input, BTN_TOUCH, 0);
+		input_sync(ts->input);
+	}
+}
+
+static irqreturn_t sun4i_ts_irq(int irq, void *dev_id)
+{
+	struct sun4i_ts_data *ts = dev_id;
+	u32 reg_val;
+
+	reg_val  = readl(ts->base + TP_INT_FIFOS);
+
+	if (reg_val & TEMP_DATA_PENDING)
+		ts->temp_data = readl(ts->base + TEMP_DATA);
+
+	if (ts->input)
+		sun4i_ts_irq_handle_input(ts, reg_val);
+
+	writel(reg_val, ts->base + TP_INT_FIFOS);
+
+	return IRQ_HANDLED;
+}
+
+static int sun4i_ts_open(struct input_dev *dev)
+{
+	struct sun4i_ts_data *ts = input_get_drvdata(dev);
+
+	/* Flush, set trig level to 1, enable temp, data and up irqs */
+	writel(TEMP_IRQ_EN(1) | DATA_IRQ_EN(1) | FIFO_TRIG(1) | FIFO_FLUSH(1) |
+		TP_UP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
+
+	return 0;
+}
+
+static void sun4i_ts_close(struct input_dev *dev)
+{
+	struct sun4i_ts_data *ts = input_get_drvdata(dev);
+
+	/* Deactivate all input IRQs */
+	writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
+}
+
+static int sun4i_get_temp(const struct sun4i_ts_data *ts, int *temp)
+{
+	/* No temp_data until the first irq */
+	if (ts->temp_data == -1)
+		return -EAGAIN;
+
+	*temp = ts->temp_data * ts->temp_step - ts->temp_offset;
+
+	return 0;
+}
+
+static int sun4i_get_tz_temp(void *data, int *temp)
+{
+	return sun4i_get_temp(data, temp);
+}
+
+static struct thermal_zone_of_device_ops sun4i_ts_tz_ops = {
+	.get_temp = sun4i_get_tz_temp,
+};
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
+			 char *buf)
+{
+	struct sun4i_ts_data *ts = dev_get_drvdata(dev);
+	int temp;
+	int error;
+
+	error = sun4i_get_temp(ts, &temp);
+	if (error)
+		return error;
+
+	return sprintf(buf, "%d\n", temp);
+}
+
+static ssize_t show_temp_label(struct device *dev,
+			      struct device_attribute *devattr, char *buf)
+{
+	return sprintf(buf, "SoC temperature\n");
+}
+
+static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL);
+static DEVICE_ATTR(temp1_label, S_IRUGO, show_temp_label, NULL);
+
+static struct attribute *sun4i_ts_attrs[] = {
+	&dev_attr_temp1_input.attr,
+	&dev_attr_temp1_label.attr,
+	NULL
+};
+ATTRIBUTE_GROUPS(sun4i_ts);
+
+static int sun4i_ts_probe(struct platform_device *pdev)
+{
+	struct sun4i_ts_data *ts;
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device *hwmon;
+	int error;
+	u32 reg;
+	bool ts_attached;
+	u32 tp_sensitive_adjust = 15;
+	u32 filter_type = 1;
+
+	ts = devm_kzalloc(dev, sizeof(struct sun4i_ts_data), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->dev = dev;
+	ts->ignore_fifo_data = true;
+	ts->temp_data = -1;
+	if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts")) {
+		/* Allwinner SDK has temperature (C) = (value / 6) - 271 */
+		ts->temp_offset = 271000;
+		ts->temp_step = 167;
+	} else if (of_device_is_compatible(np, "allwinner,sun4i-a10-ts")) {
+		/*
+		 * The A10 temperature sensor has quite a wide spread, these
+		 * parameters are based on the averaging of the calibration
+		 * results of 4 completely different boards, with a spread of
+		 * temp_step from 0.096 - 0.170 and temp_offset from 176 - 331.
+		 */
+		ts->temp_offset = 257000;
+		ts->temp_step = 133;
+	} else {
+		/*
+		 * The user manuals do not contain the formula for calculating
+		 * the temperature. The formula used here is from the AXP209,
+		 * which is designed by X-Powers, an affiliate of Allwinner:
+		 *
+		 *     temperature (C) = (value * 0.1) - 144.7
+		 *
+		 * Allwinner does not have any documentation whatsoever for
+		 * this hardware. Moreover, it is claimed that the sensor
+		 * is inaccurate and cannot work properly.
+		 */
+		ts->temp_offset = 144700;
+		ts->temp_step = 100;
+	}
+
+	ts_attached = of_property_read_bool(np, "allwinner,ts-attached");
+	if (ts_attached) {
+		ts->input = devm_input_allocate_device(dev);
+		if (!ts->input)
+			return -ENOMEM;
+
+		ts->input->name = pdev->name;
+		ts->input->phys = "sun4i_ts/input0";
+		ts->input->open = sun4i_ts_open;
+		ts->input->close = sun4i_ts_close;
+		ts->input->id.bustype = BUS_HOST;
+		ts->input->id.vendor = 0x0001;
+		ts->input->id.product = 0x0001;
+		ts->input->id.version = 0x0100;
+		ts->input->evbit[0] =  BIT(EV_SYN) | BIT(EV_KEY) | BIT(EV_ABS);
+		__set_bit(BTN_TOUCH, ts->input->keybit);
+		input_set_abs_params(ts->input, ABS_X, 0, 4095, 0, 0);
+		input_set_abs_params(ts->input, ABS_Y, 0, 4095, 0, 0);
+		input_set_drvdata(ts->input, ts);
+	}
+
+	ts->base = devm_ioremap_resource(dev,
+			      platform_get_resource(pdev, IORESOURCE_MEM, 0));
+	if (IS_ERR(ts->base))
+		return PTR_ERR(ts->base);
+
+	ts->irq = platform_get_irq(pdev, 0);
+	error = devm_request_irq(dev, ts->irq, sun4i_ts_irq, 0, "sun4i-ts", ts);
+	if (error)
+		return error;
+
+	/*
+	 * Select HOSC clk, clkin = clk / 6, adc samplefreq = clkin / 8192,
+	 * t_acq = clkin / (16 * 64)
+	 */
+	writel(ADC_CLK_SEL(0) | ADC_CLK_DIV(2) | FS_DIV(7) | T_ACQ(63),
+	       ts->base + TP_CTRL0);
+
+	/*
+	 * tp_sensitive_adjust is an optional property
+	 * tp_mode = 0 : only x and y coordinates, as we don't use dual touch
+	 */
+	of_property_read_u32(np, "allwinner,tp-sensitive-adjust",
+			     &tp_sensitive_adjust);
+	writel(TP_SENSITIVE_ADJUST(tp_sensitive_adjust) | TP_MODE_SELECT(0),
+	       ts->base + TP_CTRL2);
+
+	/*
+	 * Enable median and averaging filter, optional property for
+	 * filter type.
+	 */
+	of_property_read_u32(np, "allwinner,filter-type", &filter_type);
+	writel(FILTER_EN(1) | FILTER_TYPE(filter_type), ts->base + TP_CTRL3);
+
+	/* Enable temperature measurement, period 1953 (2 seconds) */
+	writel(TEMP_ENABLE(1) | TEMP_PERIOD(1953), ts->base + TP_TPR);
+
+	/*
+	 * Set stylus up debounce to aprox 10 ms, enable debounce, and
+	 * finally enable tp mode.
+	 */
+	reg = STYLUS_UP_DEBOUN(5) | STYLUS_UP_DEBOUN_EN(1);
+	if (of_device_is_compatible(np, "allwinner,sun6i-a31-ts"))
+		reg |= SUN6I_TP_MODE_EN(1);
+	else
+		reg |= TP_MODE_EN(1);
+	writel(reg, ts->base + TP_CTRL1);
+
+	/*
+	 * The thermal core does not register hwmon devices for DT-based
+	 * thermal zone sensors, such as this one.
+	 */
+	hwmon = devm_hwmon_device_register_with_groups(ts->dev, "sun4i_ts",
+						       ts, sun4i_ts_groups);
+	if (IS_ERR(hwmon))
+		return PTR_ERR(hwmon);
+
+	ts->tz = thermal_zone_of_sensor_register(ts->dev, 0, ts,
+						 &sun4i_ts_tz_ops);
+	if (IS_ERR(ts->tz))
+		ts->tz = NULL;
+
+	writel(TEMP_IRQ_EN(1), ts->base + TP_INT_FIFOC);
+
+	if (ts_attached) {
+		error = input_register_device(ts->input);
+		if (error) {
+			writel(0, ts->base + TP_INT_FIFOC);
+			thermal_zone_of_sensor_unregister(ts->dev, ts->tz);
+			return error;
+		}
+	}
+
+	platform_set_drvdata(pdev, ts);
+	return 0;
+}
+
+static int sun4i_ts_remove(struct platform_device *pdev)
+{
+	struct sun4i_ts_data *ts = platform_get_drvdata(pdev);
+
+	/* Explicit unregister to avoid open/close changing the imask later */
+	if (ts->input)
+		input_unregister_device(ts->input);
+
+	thermal_zone_of_sensor_unregister(ts->dev, ts->tz);
+
+	/* Deactivate all IRQs */
+	writel(0, ts->base + TP_INT_FIFOC);
+
+	return 0;
+}
+
+static const struct of_device_id sun4i_ts_of_match[] = {
+	{ .compatible = "allwinner,sun4i-a10-ts", },
+	{ .compatible = "allwinner,sun5i-a13-ts", },
+	{ .compatible = "allwinner,sun6i-a31-ts", },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sun4i_ts_of_match);
+
+static struct platform_driver sun4i_ts_driver = {
+	.driver = {
+		.name	= "sun4i-ts",
+		.of_match_table = of_match_ptr(sun4i_ts_of_match),
+	},
+	.probe	= sun4i_ts_probe,
+	.remove	= sun4i_ts_remove,
+};
+
+module_platform_driver(sun4i_ts_driver);
+
+MODULE_DESCRIPTION("Allwinner sun4i resistive touchscreen controller driver");
+MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/sur40.c b/drivers/input/touchscreen/sur40.c
new file mode 100644
index 0000000..0146e2c
--- /dev/null
+++ b/drivers/input/touchscreen/sur40.c
@@ -0,0 +1,925 @@
+/*
+ * Surface2.0/SUR40/PixelSense input driver
+ *
+ * Copyright (c) 2014 by Florian 'floe' Echtler <floe@butterbrot.org>
+ *
+ * Derived from the USB Skeleton driver 1.1,
+ * Copyright (c) 2003 Greg Kroah-Hartman (greg@kroah.com)
+ *
+ * and from the Apple USB BCM5974 multitouch driver,
+ * Copyright (c) 2008 Henrik Rydberg (rydberg@euromail.se)
+ *
+ * and from the generic hid-multitouch driver,
+ * Copyright (c) 2010-2012 Stephane Chatty <chatty@enac.fr>
+ *
+ * and from the v4l2-pci-skeleton driver,
+ * Copyright (c) Copyright 2014 Cisco Systems, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/completion.h>
+#include <linux/uaccess.h>
+#include <linux/usb.h>
+#include <linux/printk.h>
+#include <linux/input-polldev.h>
+#include <linux/input/mt.h>
+#include <linux/usb/input.h>
+#include <linux/videodev2.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-dev.h>
+#include <media/v4l2-ioctl.h>
+#include <media/videobuf2-v4l2.h>
+#include <media/videobuf2-dma-sg.h>
+
+/* read 512 bytes from endpoint 0x86 -> get header + blobs */
+struct sur40_header {
+
+	__le16 type;       /* always 0x0001 */
+	__le16 count;      /* count of blobs (if 0: continue prev. packet) */
+
+	__le32 packet_id;  /* unique ID for all packets in one frame */
+
+	__le32 timestamp;  /* milliseconds (inc. by 16 or 17 each frame) */
+	__le32 unknown;    /* "epoch?" always 02/03 00 00 00 */
+
+} __packed;
+
+struct sur40_blob {
+
+	__le16 blob_id;
+
+	u8 action;         /* 0x02 = enter/exit, 0x03 = update (?) */
+	u8 unknown;        /* always 0x01 or 0x02 (no idea what this is?) */
+
+	__le16 bb_pos_x;   /* upper left corner of bounding box */
+	__le16 bb_pos_y;
+
+	__le16 bb_size_x;  /* size of bounding box */
+	__le16 bb_size_y;
+
+	__le16 pos_x;      /* finger tip position */
+	__le16 pos_y;
+
+	__le16 ctr_x;      /* centroid position */
+	__le16 ctr_y;
+
+	__le16 axis_x;     /* somehow related to major/minor axis, mostly: */
+	__le16 axis_y;     /* axis_x == bb_size_y && axis_y == bb_size_x */
+
+	__le32 angle;      /* orientation in radians relative to x axis -
+	                      actually an IEEE754 float, don't use in kernel */
+
+	__le32 area;       /* size in pixels/pressure (?) */
+
+	u8 padding[32];
+
+} __packed;
+
+/* combined header/blob data */
+struct sur40_data {
+	struct sur40_header header;
+	struct sur40_blob   blobs[];
+} __packed;
+
+/* read 512 bytes from endpoint 0x82 -> get header below
+ * continue reading 16k blocks until header.size bytes read */
+struct sur40_image_header {
+	__le32 magic;     /* "SUBF" */
+	__le32 packet_id;
+	__le32 size;      /* always 0x0007e900 = 960x540 */
+	__le32 timestamp; /* milliseconds (increases by 16 or 17 each frame) */
+	__le32 unknown;   /* "epoch?" always 02/03 00 00 00 */
+} __packed;
+
+/* version information */
+#define DRIVER_SHORT   "sur40"
+#define DRIVER_LONG    "Samsung SUR40"
+#define DRIVER_AUTHOR  "Florian 'floe' Echtler <floe@butterbrot.org>"
+#define DRIVER_DESC    "Surface2.0/SUR40/PixelSense input driver"
+
+/* vendor and device IDs */
+#define ID_MICROSOFT 0x045e
+#define ID_SUR40     0x0775
+
+/* sensor resolution */
+#define SENSOR_RES_X 1920
+#define SENSOR_RES_Y 1080
+
+/* touch data endpoint */
+#define TOUCH_ENDPOINT 0x86
+
+/* video data endpoint */
+#define VIDEO_ENDPOINT 0x82
+
+/* video header fields */
+#define VIDEO_HEADER_MAGIC 0x46425553
+#define VIDEO_PACKET_SIZE  16384
+
+/* polling interval (ms) */
+#define POLL_INTERVAL 1
+
+/* maximum number of contacts FIXME: this is a guess? */
+#define MAX_CONTACTS 64
+
+/* control commands */
+#define SUR40_GET_VERSION 0xb0 /* 12 bytes string    */
+#define SUR40_UNKNOWN1    0xb3 /*  5 bytes           */
+#define SUR40_UNKNOWN2    0xc1 /* 24 bytes           */
+
+#define SUR40_GET_STATE   0xc5 /*  4 bytes state (?) */
+#define SUR40_GET_SENSORS 0xb1 /*  8 bytes sensors   */
+
+/* master device state */
+struct sur40_state {
+
+	struct usb_device *usbdev;
+	struct device *dev;
+	struct input_polled_dev *input;
+
+	struct v4l2_device v4l2;
+	struct video_device vdev;
+	struct mutex lock;
+
+	struct vb2_queue queue;
+	struct vb2_alloc_ctx *alloc_ctx;
+	struct list_head buf_list;
+	spinlock_t qlock;
+	int sequence;
+
+	struct sur40_data *bulk_in_buffer;
+	size_t bulk_in_size;
+	u8 bulk_in_epaddr;
+
+	char phys[64];
+};
+
+struct sur40_buffer {
+	struct vb2_v4l2_buffer vb;
+	struct list_head list;
+};
+
+/* forward declarations */
+static const struct video_device sur40_video_device;
+static const struct v4l2_pix_format sur40_video_format;
+static const struct vb2_queue sur40_queue;
+static void sur40_process_video(struct sur40_state *sur40);
+
+/*
+ * Note: an earlier, non-public version of this driver used USB_RECIP_ENDPOINT
+ * here by mistake which is very likely to have corrupted the firmware EEPROM
+ * on two separate SUR40 devices. Thanks to Alan Stern who spotted this bug.
+ * Should you ever run into a similar problem, the background story to this
+ * incident and instructions on how to fix the corrupted EEPROM are available
+ * at https://floe.butterbrot.org/matrix/hacking/surface/brick.html
+*/
+
+/* command wrapper */
+static int sur40_command(struct sur40_state *dev,
+			 u8 command, u16 index, void *buffer, u16 size)
+{
+	return usb_control_msg(dev->usbdev, usb_rcvctrlpipe(dev->usbdev, 0),
+			       command,
+			       USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
+			       0x00, index, buffer, size, 1000);
+}
+
+/* Initialization routine, called from sur40_open */
+static int sur40_init(struct sur40_state *dev)
+{
+	int result;
+	u8 buffer[24];
+
+	/* stupidly replay the original MS driver init sequence */
+	result = sur40_command(dev, SUR40_GET_VERSION, 0x00, buffer, 12);
+	if (result < 0)
+		return result;
+
+	result = sur40_command(dev, SUR40_GET_VERSION, 0x01, buffer, 12);
+	if (result < 0)
+		return result;
+
+	result = sur40_command(dev, SUR40_GET_VERSION, 0x02, buffer, 12);
+	if (result < 0)
+		return result;
+
+	result = sur40_command(dev, SUR40_UNKNOWN2,    0x00, buffer, 24);
+	if (result < 0)
+		return result;
+
+	result = sur40_command(dev, SUR40_UNKNOWN1,    0x00, buffer,  5);
+	if (result < 0)
+		return result;
+
+	result = sur40_command(dev, SUR40_GET_VERSION, 0x03, buffer, 12);
+
+	/*
+	 * Discard the result buffer - no known data inside except
+	 * some version strings, maybe extract these sometime...
+	 */
+
+	return result;
+}
+
+/*
+ * Callback routines from input_polled_dev
+ */
+
+/* Enable the device, polling will now start. */
+static void sur40_open(struct input_polled_dev *polldev)
+{
+	struct sur40_state *sur40 = polldev->private;
+
+	dev_dbg(sur40->dev, "open\n");
+	sur40_init(sur40);
+}
+
+/* Disable device, polling has stopped. */
+static void sur40_close(struct input_polled_dev *polldev)
+{
+	struct sur40_state *sur40 = polldev->private;
+
+	dev_dbg(sur40->dev, "close\n");
+	/*
+	 * There is no known way to stop the device, so we simply
+	 * stop polling.
+	 */
+}
+
+/*
+ * This function is called when a whole contact has been processed,
+ * so that it can assign it to a slot and store the data there.
+ */
+static void sur40_report_blob(struct sur40_blob *blob, struct input_dev *input)
+{
+	int wide, major, minor;
+
+	int bb_size_x = le16_to_cpu(blob->bb_size_x);
+	int bb_size_y = le16_to_cpu(blob->bb_size_y);
+
+	int pos_x = le16_to_cpu(blob->pos_x);
+	int pos_y = le16_to_cpu(blob->pos_y);
+
+	int ctr_x = le16_to_cpu(blob->ctr_x);
+	int ctr_y = le16_to_cpu(blob->ctr_y);
+
+	int slotnum = input_mt_get_slot_by_key(input, blob->blob_id);
+	if (slotnum < 0 || slotnum >= MAX_CONTACTS)
+		return;
+
+	input_mt_slot(input, slotnum);
+	input_mt_report_slot_state(input, MT_TOOL_FINGER, 1);
+	wide = (bb_size_x > bb_size_y);
+	major = max(bb_size_x, bb_size_y);
+	minor = min(bb_size_x, bb_size_y);
+
+	input_report_abs(input, ABS_MT_POSITION_X, pos_x);
+	input_report_abs(input, ABS_MT_POSITION_Y, pos_y);
+	input_report_abs(input, ABS_MT_TOOL_X, ctr_x);
+	input_report_abs(input, ABS_MT_TOOL_Y, ctr_y);
+
+	/* TODO: use a better orientation measure */
+	input_report_abs(input, ABS_MT_ORIENTATION, wide);
+	input_report_abs(input, ABS_MT_TOUCH_MAJOR, major);
+	input_report_abs(input, ABS_MT_TOUCH_MINOR, minor);
+}
+
+/* core function: poll for new input data */
+static void sur40_poll(struct input_polled_dev *polldev)
+{
+	struct sur40_state *sur40 = polldev->private;
+	struct input_dev *input = polldev->input;
+	int result, bulk_read, need_blobs, packet_blobs, i;
+	u32 uninitialized_var(packet_id);
+
+	struct sur40_header *header = &sur40->bulk_in_buffer->header;
+	struct sur40_blob *inblob = &sur40->bulk_in_buffer->blobs[0];
+
+	dev_dbg(sur40->dev, "poll\n");
+
+	need_blobs = -1;
+
+	do {
+
+		/* perform a blocking bulk read to get data from the device */
+		result = usb_bulk_msg(sur40->usbdev,
+			usb_rcvbulkpipe(sur40->usbdev, sur40->bulk_in_epaddr),
+			sur40->bulk_in_buffer, sur40->bulk_in_size,
+			&bulk_read, 1000);
+
+		dev_dbg(sur40->dev, "received %d bytes\n", bulk_read);
+
+		if (result < 0) {
+			dev_err(sur40->dev, "error in usb_bulk_read\n");
+			return;
+		}
+
+		result = bulk_read - sizeof(struct sur40_header);
+
+		if (result % sizeof(struct sur40_blob) != 0) {
+			dev_err(sur40->dev, "transfer size mismatch\n");
+			return;
+		}
+
+		/* first packet? */
+		if (need_blobs == -1) {
+			need_blobs = le16_to_cpu(header->count);
+			dev_dbg(sur40->dev, "need %d blobs\n", need_blobs);
+			packet_id = le32_to_cpu(header->packet_id);
+		}
+
+		/*
+		 * Sanity check. when video data is also being retrieved, the
+		 * packet ID will usually increase in the middle of a series
+		 * instead of at the end.
+		 */
+		if (packet_id != header->packet_id)
+			dev_dbg(sur40->dev, "packet ID mismatch\n");
+
+		packet_blobs = result / sizeof(struct sur40_blob);
+		dev_dbg(sur40->dev, "received %d blobs\n", packet_blobs);
+
+		/* packets always contain at least 4 blobs, even if empty */
+		if (packet_blobs > need_blobs)
+			packet_blobs = need_blobs;
+
+		for (i = 0; i < packet_blobs; i++) {
+			need_blobs--;
+			dev_dbg(sur40->dev, "processing blob\n");
+			sur40_report_blob(&(inblob[i]), input);
+		}
+
+	} while (need_blobs > 0);
+
+	input_mt_sync_frame(input);
+	input_sync(input);
+
+	sur40_process_video(sur40);
+}
+
+/* deal with video data */
+static void sur40_process_video(struct sur40_state *sur40)
+{
+
+	struct sur40_image_header *img = (void *)(sur40->bulk_in_buffer);
+	struct sur40_buffer *new_buf;
+	struct usb_sg_request sgr;
+	struct sg_table *sgt;
+	int result, bulk_read;
+
+	if (!vb2_start_streaming_called(&sur40->queue))
+		return;
+
+	/* get a new buffer from the list */
+	spin_lock(&sur40->qlock);
+	if (list_empty(&sur40->buf_list)) {
+		dev_dbg(sur40->dev, "buffer queue empty\n");
+		spin_unlock(&sur40->qlock);
+		return;
+	}
+	new_buf = list_entry(sur40->buf_list.next, struct sur40_buffer, list);
+	list_del(&new_buf->list);
+	spin_unlock(&sur40->qlock);
+
+	dev_dbg(sur40->dev, "buffer acquired\n");
+
+	/* retrieve data via bulk read */
+	result = usb_bulk_msg(sur40->usbdev,
+			usb_rcvbulkpipe(sur40->usbdev, VIDEO_ENDPOINT),
+			sur40->bulk_in_buffer, sur40->bulk_in_size,
+			&bulk_read, 1000);
+
+	if (result < 0) {
+		dev_err(sur40->dev, "error in usb_bulk_read\n");
+		goto err_poll;
+	}
+
+	if (bulk_read != sizeof(struct sur40_image_header)) {
+		dev_err(sur40->dev, "received %d bytes (%zd expected)\n",
+			bulk_read, sizeof(struct sur40_image_header));
+		goto err_poll;
+	}
+
+	if (le32_to_cpu(img->magic) != VIDEO_HEADER_MAGIC) {
+		dev_err(sur40->dev, "image magic mismatch\n");
+		goto err_poll;
+	}
+
+	if (le32_to_cpu(img->size) != sur40_video_format.sizeimage) {
+		dev_err(sur40->dev, "image size mismatch\n");
+		goto err_poll;
+	}
+
+	dev_dbg(sur40->dev, "header acquired\n");
+
+	sgt = vb2_dma_sg_plane_desc(&new_buf->vb.vb2_buf, 0);
+
+	result = usb_sg_init(&sgr, sur40->usbdev,
+		usb_rcvbulkpipe(sur40->usbdev, VIDEO_ENDPOINT), 0,
+		sgt->sgl, sgt->nents, sur40_video_format.sizeimage, 0);
+	if (result < 0) {
+		dev_err(sur40->dev, "error %d in usb_sg_init\n", result);
+		goto err_poll;
+	}
+
+	usb_sg_wait(&sgr);
+	if (sgr.status < 0) {
+		dev_err(sur40->dev, "error %d in usb_sg_wait\n", sgr.status);
+		goto err_poll;
+	}
+
+	dev_dbg(sur40->dev, "image acquired\n");
+
+	/* return error if streaming was stopped in the meantime */
+	if (sur40->sequence == -1)
+		return;
+
+	/* mark as finished */
+	v4l2_get_timestamp(&new_buf->vb.timestamp);
+	new_buf->vb.sequence = sur40->sequence++;
+	new_buf->vb.field = V4L2_FIELD_NONE;
+	vb2_buffer_done(&new_buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
+	dev_dbg(sur40->dev, "buffer marked done\n");
+	return;
+
+err_poll:
+	vb2_buffer_done(&new_buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+}
+
+/* Initialize input device parameters. */
+static void sur40_input_setup(struct input_dev *input_dev)
+{
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_ABS, input_dev->evbit);
+
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X,
+			     0, SENSOR_RES_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
+			     0, SENSOR_RES_Y, 0, 0);
+
+	input_set_abs_params(input_dev, ABS_MT_TOOL_X,
+			     0, SENSOR_RES_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOOL_Y,
+			     0, SENSOR_RES_Y, 0, 0);
+
+	/* max value unknown, but major/minor axis
+	 * can never be larger than screen */
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
+			     0, SENSOR_RES_X, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR,
+			     0, SENSOR_RES_Y, 0, 0);
+
+	input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+
+	input_mt_init_slots(input_dev, MAX_CONTACTS,
+			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+}
+
+/* Check candidate USB interface. */
+static int sur40_probe(struct usb_interface *interface,
+		       const struct usb_device_id *id)
+{
+	struct usb_device *usbdev = interface_to_usbdev(interface);
+	struct sur40_state *sur40;
+	struct usb_host_interface *iface_desc;
+	struct usb_endpoint_descriptor *endpoint;
+	struct input_polled_dev *poll_dev;
+	int error;
+
+	/* Check if we really have the right interface. */
+	iface_desc = &interface->altsetting[0];
+	if (iface_desc->desc.bInterfaceClass != 0xFF)
+		return -ENODEV;
+
+	if (iface_desc->desc.bNumEndpoints < 5)
+		return -ENODEV;
+
+	/* Use endpoint #4 (0x86). */
+	endpoint = &iface_desc->endpoint[4].desc;
+	if (endpoint->bEndpointAddress != TOUCH_ENDPOINT)
+		return -ENODEV;
+
+	/* Allocate memory for our device state and initialize it. */
+	sur40 = kzalloc(sizeof(struct sur40_state), GFP_KERNEL);
+	if (!sur40)
+		return -ENOMEM;
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		error = -ENOMEM;
+		goto err_free_dev;
+	}
+
+	/* initialize locks/lists */
+	INIT_LIST_HEAD(&sur40->buf_list);
+	spin_lock_init(&sur40->qlock);
+	mutex_init(&sur40->lock);
+
+	/* Set up polled input device control structure */
+	poll_dev->private = sur40;
+	poll_dev->poll_interval = POLL_INTERVAL;
+	poll_dev->open = sur40_open;
+	poll_dev->poll = sur40_poll;
+	poll_dev->close = sur40_close;
+
+	/* Set up regular input device structure */
+	sur40_input_setup(poll_dev->input);
+
+	poll_dev->input->name = DRIVER_LONG;
+	usb_to_input_id(usbdev, &poll_dev->input->id);
+	usb_make_path(usbdev, sur40->phys, sizeof(sur40->phys));
+	strlcat(sur40->phys, "/input0", sizeof(sur40->phys));
+	poll_dev->input->phys = sur40->phys;
+	poll_dev->input->dev.parent = &interface->dev;
+
+	sur40->usbdev = usbdev;
+	sur40->dev = &interface->dev;
+	sur40->input = poll_dev;
+
+	/* use the bulk-in endpoint tested above */
+	sur40->bulk_in_size = usb_endpoint_maxp(endpoint);
+	sur40->bulk_in_epaddr = endpoint->bEndpointAddress;
+	sur40->bulk_in_buffer = kmalloc(sur40->bulk_in_size, GFP_KERNEL);
+	if (!sur40->bulk_in_buffer) {
+		dev_err(&interface->dev, "Unable to allocate input buffer.");
+		error = -ENOMEM;
+		goto err_free_polldev;
+	}
+
+	/* register the polled input device */
+	error = input_register_polled_device(poll_dev);
+	if (error) {
+		dev_err(&interface->dev,
+			"Unable to register polled input device.");
+		goto err_free_buffer;
+	}
+
+	/* register the video master device */
+	snprintf(sur40->v4l2.name, sizeof(sur40->v4l2.name), "%s", DRIVER_LONG);
+	error = v4l2_device_register(sur40->dev, &sur40->v4l2);
+	if (error) {
+		dev_err(&interface->dev,
+			"Unable to register video master device.");
+		goto err_unreg_v4l2;
+	}
+
+	/* initialize the lock and subdevice */
+	sur40->queue = sur40_queue;
+	sur40->queue.drv_priv = sur40;
+	sur40->queue.lock = &sur40->lock;
+
+	/* initialize the queue */
+	error = vb2_queue_init(&sur40->queue);
+	if (error)
+		goto err_unreg_v4l2;
+
+	sur40->alloc_ctx = vb2_dma_sg_init_ctx(sur40->dev);
+	if (IS_ERR(sur40->alloc_ctx)) {
+		dev_err(sur40->dev, "Can't allocate buffer context");
+		error = PTR_ERR(sur40->alloc_ctx);
+		goto err_unreg_v4l2;
+	}
+
+	sur40->vdev = sur40_video_device;
+	sur40->vdev.v4l2_dev = &sur40->v4l2;
+	sur40->vdev.lock = &sur40->lock;
+	sur40->vdev.queue = &sur40->queue;
+	video_set_drvdata(&sur40->vdev, sur40);
+
+	error = video_register_device(&sur40->vdev, VFL_TYPE_GRABBER, -1);
+	if (error) {
+		dev_err(&interface->dev,
+			"Unable to register video subdevice.");
+		goto err_unreg_video;
+	}
+
+	/* we can register the device now, as it is ready */
+	usb_set_intfdata(interface, sur40);
+	dev_dbg(&interface->dev, "%s is now attached\n", DRIVER_DESC);
+
+	return 0;
+
+err_unreg_video:
+	video_unregister_device(&sur40->vdev);
+err_unreg_v4l2:
+	v4l2_device_unregister(&sur40->v4l2);
+err_free_buffer:
+	kfree(sur40->bulk_in_buffer);
+err_free_polldev:
+	input_free_polled_device(sur40->input);
+err_free_dev:
+	kfree(sur40);
+
+	return error;
+}
+
+/* Unregister device & clean up. */
+static void sur40_disconnect(struct usb_interface *interface)
+{
+	struct sur40_state *sur40 = usb_get_intfdata(interface);
+
+	video_unregister_device(&sur40->vdev);
+	v4l2_device_unregister(&sur40->v4l2);
+	vb2_dma_sg_cleanup_ctx(sur40->alloc_ctx);
+
+	input_unregister_polled_device(sur40->input);
+	input_free_polled_device(sur40->input);
+	kfree(sur40->bulk_in_buffer);
+	kfree(sur40);
+
+	usb_set_intfdata(interface, NULL);
+	dev_dbg(&interface->dev, "%s is now disconnected\n", DRIVER_DESC);
+}
+
+/*
+ * Setup the constraints of the queue: besides setting the number of planes
+ * per buffer and the size and allocation context of each plane, it also
+ * checks if sufficient buffers have been allocated. Usually 3 is a good
+ * minimum number: many DMA engines need a minimum of 2 buffers in the
+ * queue and you need to have another available for userspace processing.
+ */
+static int sur40_queue_setup(struct vb2_queue *q, const void *parg,
+		       unsigned int *nbuffers, unsigned int *nplanes,
+		       unsigned int sizes[], void *alloc_ctxs[])
+{
+	const struct v4l2_format *fmt = parg;
+	struct sur40_state *sur40 = vb2_get_drv_priv(q);
+
+	if (q->num_buffers + *nbuffers < 3)
+		*nbuffers = 3 - q->num_buffers;
+
+	if (fmt && fmt->fmt.pix.sizeimage < sur40_video_format.sizeimage)
+		return -EINVAL;
+
+	*nplanes = 1;
+	sizes[0] = fmt ? fmt->fmt.pix.sizeimage : sur40_video_format.sizeimage;
+	alloc_ctxs[0] = sur40->alloc_ctx;
+
+	return 0;
+}
+
+/*
+ * Prepare the buffer for queueing to the DMA engine: check and set the
+ * payload size.
+ */
+static int sur40_buffer_prepare(struct vb2_buffer *vb)
+{
+	struct sur40_state *sur40 = vb2_get_drv_priv(vb->vb2_queue);
+	unsigned long size = sur40_video_format.sizeimage;
+
+	if (vb2_plane_size(vb, 0) < size) {
+		dev_err(&sur40->usbdev->dev, "buffer too small (%lu < %lu)\n",
+			 vb2_plane_size(vb, 0), size);
+		return -EINVAL;
+	}
+
+	vb2_set_plane_payload(vb, 0, size);
+	return 0;
+}
+
+/*
+ * Queue this buffer to the DMA engine.
+ */
+static void sur40_buffer_queue(struct vb2_buffer *vb)
+{
+	struct sur40_state *sur40 = vb2_get_drv_priv(vb->vb2_queue);
+	struct sur40_buffer *buf = (struct sur40_buffer *)vb;
+
+	spin_lock(&sur40->qlock);
+	list_add_tail(&buf->list, &sur40->buf_list);
+	spin_unlock(&sur40->qlock);
+}
+
+static void return_all_buffers(struct sur40_state *sur40,
+			       enum vb2_buffer_state state)
+{
+	struct sur40_buffer *buf, *node;
+
+	spin_lock(&sur40->qlock);
+	list_for_each_entry_safe(buf, node, &sur40->buf_list, list) {
+		vb2_buffer_done(&buf->vb.vb2_buf, state);
+		list_del(&buf->list);
+	}
+	spin_unlock(&sur40->qlock);
+}
+
+/*
+ * Start streaming. First check if the minimum number of buffers have been
+ * queued. If not, then return -ENOBUFS and the vb2 framework will call
+ * this function again the next time a buffer has been queued until enough
+ * buffers are available to actually start the DMA engine.
+ */
+static int sur40_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+	struct sur40_state *sur40 = vb2_get_drv_priv(vq);
+
+	sur40->sequence = 0;
+	return 0;
+}
+
+/*
+ * Stop the DMA engine. Any remaining buffers in the DMA queue are dequeued
+ * and passed on to the vb2 framework marked as STATE_ERROR.
+ */
+static void sur40_stop_streaming(struct vb2_queue *vq)
+{
+	struct sur40_state *sur40 = vb2_get_drv_priv(vq);
+	vb2_wait_for_all_buffers(vq);
+	sur40->sequence = -1;
+
+	/* Release all active buffers */
+	return_all_buffers(sur40, VB2_BUF_STATE_ERROR);
+}
+
+/* V4L ioctl */
+static int sur40_vidioc_querycap(struct file *file, void *priv,
+				 struct v4l2_capability *cap)
+{
+	struct sur40_state *sur40 = video_drvdata(file);
+
+	strlcpy(cap->driver, DRIVER_SHORT, sizeof(cap->driver));
+	strlcpy(cap->card, DRIVER_LONG, sizeof(cap->card));
+	usb_make_path(sur40->usbdev, cap->bus_info, sizeof(cap->bus_info));
+	cap->device_caps = V4L2_CAP_VIDEO_CAPTURE |
+		V4L2_CAP_READWRITE |
+		V4L2_CAP_STREAMING;
+	cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+	return 0;
+}
+
+static int sur40_vidioc_enum_input(struct file *file, void *priv,
+				   struct v4l2_input *i)
+{
+	if (i->index != 0)
+		return -EINVAL;
+	i->type = V4L2_INPUT_TYPE_CAMERA;
+	i->std = V4L2_STD_UNKNOWN;
+	strlcpy(i->name, "In-Cell Sensor", sizeof(i->name));
+	i->capabilities = 0;
+	return 0;
+}
+
+static int sur40_vidioc_s_input(struct file *file, void *priv, unsigned int i)
+{
+	return (i == 0) ? 0 : -EINVAL;
+}
+
+static int sur40_vidioc_g_input(struct file *file, void *priv, unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+static int sur40_vidioc_fmt(struct file *file, void *priv,
+			    struct v4l2_format *f)
+{
+	f->fmt.pix = sur40_video_format;
+	return 0;
+}
+
+static int sur40_vidioc_enum_fmt(struct file *file, void *priv,
+				 struct v4l2_fmtdesc *f)
+{
+	if (f->index != 0)
+		return -EINVAL;
+	strlcpy(f->description, "8-bit greyscale", sizeof(f->description));
+	f->pixelformat = V4L2_PIX_FMT_GREY;
+	f->flags = 0;
+	return 0;
+}
+
+static int sur40_vidioc_enum_framesizes(struct file *file, void *priv,
+					struct v4l2_frmsizeenum *f)
+{
+	if ((f->index != 0) || (f->pixel_format != V4L2_PIX_FMT_GREY))
+		return -EINVAL;
+
+	f->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+	f->discrete.width  = sur40_video_format.width;
+	f->discrete.height = sur40_video_format.height;
+	return 0;
+}
+
+static int sur40_vidioc_enum_frameintervals(struct file *file, void *priv,
+					    struct v4l2_frmivalenum *f)
+{
+	if ((f->index > 1) || (f->pixel_format != V4L2_PIX_FMT_GREY)
+		|| (f->width  != sur40_video_format.width)
+		|| (f->height != sur40_video_format.height))
+			return -EINVAL;
+
+	f->type = V4L2_FRMIVAL_TYPE_DISCRETE;
+	f->discrete.denominator  = 60/(f->index+1);
+	f->discrete.numerator = 1;
+	return 0;
+}
+
+
+static const struct usb_device_id sur40_table[] = {
+	{ USB_DEVICE(ID_MICROSOFT, ID_SUR40) },  /* Samsung SUR40 */
+	{ }                                      /* terminating null entry */
+};
+MODULE_DEVICE_TABLE(usb, sur40_table);
+
+/* V4L2 structures */
+static const struct vb2_ops sur40_queue_ops = {
+	.queue_setup		= sur40_queue_setup,
+	.buf_prepare		= sur40_buffer_prepare,
+	.buf_queue		= sur40_buffer_queue,
+	.start_streaming	= sur40_start_streaming,
+	.stop_streaming		= sur40_stop_streaming,
+	.wait_prepare		= vb2_ops_wait_prepare,
+	.wait_finish		= vb2_ops_wait_finish,
+};
+
+static const struct vb2_queue sur40_queue = {
+	.type = V4L2_BUF_TYPE_VIDEO_CAPTURE,
+	/*
+	 * VB2_USERPTR in currently not enabled: passing a user pointer to
+	 * dma-sg will result in segment sizes that are not a multiple of
+	 * 512 bytes, which is required by the host controller.
+	*/
+	.io_modes = VB2_MMAP | VB2_READ | VB2_DMABUF,
+	.buf_struct_size = sizeof(struct sur40_buffer),
+	.ops = &sur40_queue_ops,
+	.mem_ops = &vb2_dma_sg_memops,
+	.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC,
+	.min_buffers_needed = 3,
+};
+
+static const struct v4l2_file_operations sur40_video_fops = {
+	.owner = THIS_MODULE,
+	.open = v4l2_fh_open,
+	.release = vb2_fop_release,
+	.unlocked_ioctl = video_ioctl2,
+	.read = vb2_fop_read,
+	.mmap = vb2_fop_mmap,
+	.poll = vb2_fop_poll,
+};
+
+static const struct v4l2_ioctl_ops sur40_video_ioctl_ops = {
+
+	.vidioc_querycap	= sur40_vidioc_querycap,
+
+	.vidioc_enum_fmt_vid_cap = sur40_vidioc_enum_fmt,
+	.vidioc_try_fmt_vid_cap	= sur40_vidioc_fmt,
+	.vidioc_s_fmt_vid_cap	= sur40_vidioc_fmt,
+	.vidioc_g_fmt_vid_cap	= sur40_vidioc_fmt,
+
+	.vidioc_enum_framesizes = sur40_vidioc_enum_framesizes,
+	.vidioc_enum_frameintervals = sur40_vidioc_enum_frameintervals,
+
+	.vidioc_enum_input	= sur40_vidioc_enum_input,
+	.vidioc_g_input		= sur40_vidioc_g_input,
+	.vidioc_s_input		= sur40_vidioc_s_input,
+
+	.vidioc_reqbufs		= vb2_ioctl_reqbufs,
+	.vidioc_create_bufs	= vb2_ioctl_create_bufs,
+	.vidioc_querybuf	= vb2_ioctl_querybuf,
+	.vidioc_qbuf		= vb2_ioctl_qbuf,
+	.vidioc_dqbuf		= vb2_ioctl_dqbuf,
+	.vidioc_expbuf		= vb2_ioctl_expbuf,
+
+	.vidioc_streamon	= vb2_ioctl_streamon,
+	.vidioc_streamoff	= vb2_ioctl_streamoff,
+};
+
+static const struct video_device sur40_video_device = {
+	.name = DRIVER_LONG,
+	.fops = &sur40_video_fops,
+	.ioctl_ops = &sur40_video_ioctl_ops,
+	.release = video_device_release_empty,
+};
+
+static const struct v4l2_pix_format sur40_video_format = {
+	.pixelformat = V4L2_PIX_FMT_GREY,
+	.width  = SENSOR_RES_X / 2,
+	.height = SENSOR_RES_Y / 2,
+	.field = V4L2_FIELD_NONE,
+	.colorspace = V4L2_COLORSPACE_SRGB,
+	.bytesperline = SENSOR_RES_X / 2,
+	.sizeimage = (SENSOR_RES_X/2) * (SENSOR_RES_Y/2),
+};
+
+/* USB-specific object needed to register this driver with the USB subsystem. */
+static struct usb_driver sur40_driver = {
+	.name = DRIVER_SHORT,
+	.probe = sur40_probe,
+	.disconnect = sur40_disconnect,
+	.id_table = sur40_table,
+};
+
+module_usb_driver(sur40_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/sx8654.c b/drivers/input/touchscreen/sx8654.c
new file mode 100644
index 0000000..642f4a5
--- /dev/null
+++ b/drivers/input/touchscreen/sx8654.c
@@ -0,0 +1,286 @@
+/*
+ * Driver for Semtech SX8654 I2C touchscreen controller.
+ *
+ * Copyright (c) 2015 Armadeus Systems
+ *	Sébastien Szymanski <sebastien.szymanski@armadeus.com>
+ *
+ * Using code from:
+ *  - sx865x.c
+ *	Copyright (c) 2013 U-MoBo Srl
+ *	Pierluigi Passaro <p.passaro@u-mobo.com>
+ *  - sx8650.c
+ *      Copyright (c) 2009 Wayne Roberts
+ *  - tsc2007.c
+ *      Copyright (c) 2008 Kwangwoo Lee
+ *  - ads7846.c
+ *      Copyright (c) 2005 David Brownell
+ *      Copyright (c) 2006 Nokia Corporation
+ *  - corgi_ts.c
+ *      Copyright (C) 2004-2005 Richard Purdie
+ *  - omap_ts.[hc], ads7846.h, ts_osk.c
+ *      Copyright (C) 2002 MontaVista Software
+ *      Copyright (C) 2004 Texas Instruments
+ *      Copyright (C) 2005 Dirk Behme
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+
+/* register addresses */
+#define I2C_REG_TOUCH0			0x00
+#define I2C_REG_TOUCH1			0x01
+#define I2C_REG_CHANMASK		0x04
+#define I2C_REG_IRQMASK			0x22
+#define I2C_REG_IRQSRC			0x23
+#define I2C_REG_SOFTRESET		0x3f
+
+/* commands */
+#define CMD_READ_REGISTER		0x40
+#define CMD_MANUAL			0xc0
+#define CMD_PENTRG			0xe0
+
+/* value for I2C_REG_SOFTRESET */
+#define SOFTRESET_VALUE			0xde
+
+/* bits for I2C_REG_IRQSRC */
+#define IRQ_PENTOUCH_TOUCHCONVDONE	0x08
+#define IRQ_PENRELEASE			0x04
+
+/* bits for RegTouch1 */
+#define CONDIRQ				0x20
+#define FILT_7SA			0x03
+
+/* bits for I2C_REG_CHANMASK */
+#define CONV_X				0x80
+#define CONV_Y				0x40
+
+/* coordinates rate: higher nibble of CTRL0 register */
+#define RATE_MANUAL			0x00
+#define RATE_5000CPS			0xf0
+
+/* power delay: lower nibble of CTRL0 register */
+#define POWDLY_1_1MS			0x0b
+
+#define MAX_12BIT			((1 << 12) - 1)
+
+struct sx8654 {
+	struct input_dev *input;
+	struct i2c_client *client;
+};
+
+static irqreturn_t sx8654_irq(int irq, void *handle)
+{
+	struct sx8654 *sx8654 = handle;
+	int irqsrc;
+	u8 data[4];
+	unsigned int x, y;
+	int retval;
+
+	irqsrc = i2c_smbus_read_byte_data(sx8654->client,
+					  CMD_READ_REGISTER | I2C_REG_IRQSRC);
+	dev_dbg(&sx8654->client->dev, "irqsrc = 0x%x", irqsrc);
+
+	if (irqsrc < 0)
+		goto out;
+
+	if (irqsrc & IRQ_PENRELEASE) {
+		dev_dbg(&sx8654->client->dev, "pen release interrupt");
+
+		input_report_key(sx8654->input, BTN_TOUCH, 0);
+		input_sync(sx8654->input);
+	}
+
+	if (irqsrc & IRQ_PENTOUCH_TOUCHCONVDONE) {
+		dev_dbg(&sx8654->client->dev, "pen touch interrupt");
+
+		retval = i2c_master_recv(sx8654->client, data, sizeof(data));
+		if (retval != sizeof(data))
+			goto out;
+
+		/* invalid data */
+		if (unlikely(data[0] & 0x80 || data[2] & 0x80))
+			goto out;
+
+		x = ((data[0] & 0xf) << 8) | (data[1]);
+		y = ((data[2] & 0xf) << 8) | (data[3]);
+
+		input_report_abs(sx8654->input, ABS_X, x);
+		input_report_abs(sx8654->input, ABS_Y, y);
+		input_report_key(sx8654->input, BTN_TOUCH, 1);
+		input_sync(sx8654->input);
+
+		dev_dbg(&sx8654->client->dev, "point(%4d,%4d)\n", x, y);
+	}
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int sx8654_open(struct input_dev *dev)
+{
+	struct sx8654 *sx8654 = input_get_drvdata(dev);
+	struct i2c_client *client = sx8654->client;
+	int error;
+
+	/* enable pen trigger mode */
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0,
+					  RATE_5000CPS | POWDLY_1_1MS);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte(client, CMD_PENTRG);
+	if (error) {
+		dev_err(&client->dev, "writing command CMD_PENTRG failed");
+		return error;
+	}
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void sx8654_close(struct input_dev *dev)
+{
+	struct sx8654 *sx8654 = input_get_drvdata(dev);
+	struct i2c_client *client = sx8654->client;
+	int error;
+
+	disable_irq(client->irq);
+
+	/* enable manual mode mode */
+	error = i2c_smbus_write_byte(client, CMD_MANUAL);
+	if (error) {
+		dev_err(&client->dev, "writing command CMD_MANUAL failed");
+		return;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH0, 0);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_TOUCH0 failed");
+		return;
+	}
+}
+
+static int sx8654_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct sx8654 *sx8654;
+	struct input_dev *input;
+	int error;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -ENXIO;
+
+	sx8654 = devm_kzalloc(&client->dev, sizeof(*sx8654), GFP_KERNEL);
+	if (!sx8654)
+		return -ENOMEM;
+
+	input = devm_input_allocate_device(&client->dev);
+	if (!input)
+		return -ENOMEM;
+
+	input->name = "SX8654 I2C Touchscreen";
+	input->id.bustype = BUS_I2C;
+	input->dev.parent = &client->dev;
+	input->open = sx8654_open;
+	input->close = sx8654_close;
+
+	__set_bit(INPUT_PROP_DIRECT, input->propbit);
+	input_set_capability(input, EV_KEY, BTN_TOUCH);
+	input_set_abs_params(input, ABS_X, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, MAX_12BIT, 0, 0);
+
+	sx8654->client = client;
+	sx8654->input = input;
+
+	input_set_drvdata(sx8654->input, sx8654);
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_SOFTRESET,
+					  SOFTRESET_VALUE);
+	if (error) {
+		dev_err(&client->dev, "writing softreset value failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_CHANMASK,
+					  CONV_X | CONV_Y);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_CHANMASK failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_IRQMASK,
+					  IRQ_PENTOUCH_TOUCHCONVDONE |
+						IRQ_PENRELEASE);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_IRQMASK failed");
+		return error;
+	}
+
+	error = i2c_smbus_write_byte_data(client, I2C_REG_TOUCH1,
+					  CONDIRQ | FILT_7SA);
+	if (error) {
+		dev_err(&client->dev, "writing to I2C_REG_TOUCH1 failed");
+		return error;
+	}
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, sx8654_irq,
+					  IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
+					  client->name, sx8654);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to enable IRQ %d, error: %d\n",
+			client->irq, error);
+		return error;
+	}
+
+	/* Disable the IRQ, we'll enable it in sx8654_open() */
+	disable_irq(client->irq);
+
+	error = input_register_device(sx8654->input);
+	if (error)
+		return error;
+
+	i2c_set_clientdata(client, sx8654);
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id sx8654_of_match[] = {
+	{ .compatible = "semtech,sx8654", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, sx8654_of_match);
+#endif
+
+static const struct i2c_device_id sx8654_id_table[] = {
+	{ "semtech_sx8654", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, sx8654_id_table);
+
+static struct i2c_driver sx8654_driver = {
+	.driver = {
+		.name = "sx8654",
+		.of_match_table = of_match_ptr(sx8654_of_match),
+	},
+	.id_table = sx8654_id_table,
+	.probe = sx8654_probe,
+};
+module_i2c_driver(sx8654_driver);
+
+MODULE_AUTHOR("Sébastien Szymanski <sebastien.szymanski@armadeus.com>");
+MODULE_DESCRIPTION("Semtech SX8654 I2C Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/ti_am335x_tsc.c b/drivers/input/touchscreen/ti_am335x_tsc.c
new file mode 100644
index 0000000..191a1b8
--- /dev/null
+++ b/drivers/input/touchscreen/ti_am335x_tsc.c
@@ -0,0 +1,554 @@
+/*
+ * TI Touch Screen driver
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/sort.h>
+
+#include <linux/mfd/ti_am335x_tscadc.h>
+
+#define ADCFSM_STEPID		0x10
+#define SEQ_SETTLE		275
+#define MAX_12BIT		((1 << 12) - 1)
+
+static const int config_pins[] = {
+	STEPCONFIG_XPP,
+	STEPCONFIG_XNN,
+	STEPCONFIG_YPP,
+	STEPCONFIG_YNN,
+};
+
+struct titsc {
+	struct input_dev	*input;
+	struct ti_tscadc_dev	*mfd_tscadc;
+	unsigned int		irq;
+	unsigned int		wires;
+	unsigned int		x_plate_resistance;
+	bool			pen_down;
+	int			coordinate_readouts;
+	u32			config_inp[4];
+	u32			bit_xp, bit_xn, bit_yp, bit_yn;
+	u32			inp_xp, inp_xn, inp_yp, inp_yn;
+	u32			step_mask;
+	u32			charge_delay;
+};
+
+static unsigned int titsc_readl(struct titsc *ts, unsigned int reg)
+{
+	return readl(ts->mfd_tscadc->tscadc_base + reg);
+}
+
+static void titsc_writel(struct titsc *tsc, unsigned int reg,
+					unsigned int val)
+{
+	writel(val, tsc->mfd_tscadc->tscadc_base + reg);
+}
+
+static int titsc_config_wires(struct titsc *ts_dev)
+{
+	u32 analog_line[4];
+	u32 wire_order[4];
+	int i, bit_cfg;
+
+	for (i = 0; i < 4; i++) {
+		/*
+		 * Get the order in which TSC wires are attached
+		 * w.r.t. each of the analog input lines on the EVM.
+		 */
+		analog_line[i] = (ts_dev->config_inp[i] & 0xF0) >> 4;
+		wire_order[i] = ts_dev->config_inp[i] & 0x0F;
+		if (WARN_ON(analog_line[i] > 7))
+			return -EINVAL;
+		if (WARN_ON(wire_order[i] > ARRAY_SIZE(config_pins)))
+			return -EINVAL;
+	}
+
+	for (i = 0; i < 4; i++) {
+		int an_line;
+		int wi_order;
+
+		an_line = analog_line[i];
+		wi_order = wire_order[i];
+		bit_cfg = config_pins[wi_order];
+		if (bit_cfg == 0)
+			return -EINVAL;
+		switch (wi_order) {
+		case 0:
+			ts_dev->bit_xp = bit_cfg;
+			ts_dev->inp_xp = an_line;
+			break;
+
+		case 1:
+			ts_dev->bit_xn = bit_cfg;
+			ts_dev->inp_xn = an_line;
+			break;
+
+		case 2:
+			ts_dev->bit_yp = bit_cfg;
+			ts_dev->inp_yp = an_line;
+			break;
+		case 3:
+			ts_dev->bit_yn = bit_cfg;
+			ts_dev->inp_yn = an_line;
+			break;
+		}
+	}
+	return 0;
+}
+
+static void titsc_step_config(struct titsc *ts_dev)
+{
+	unsigned int	config;
+	int i;
+	int end_step, first_step, tsc_steps;
+	u32 stepenable;
+
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_AVG_16 | ts_dev->bit_xp;
+	switch (ts_dev->wires) {
+	case 4:
+		config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
+		break;
+	case 5:
+		config |= ts_dev->bit_yn |
+				STEPCONFIG_INP_AN4 | ts_dev->bit_xn |
+				ts_dev->bit_yp;
+		break;
+	case 8:
+		config |= STEPCONFIG_INP(ts_dev->inp_yp) | ts_dev->bit_xn;
+		break;
+	}
+
+	tsc_steps = ts_dev->coordinate_readouts * 2 + 2;
+	first_step = TOTAL_STEPS - tsc_steps;
+	/* Steps 16 to 16-coordinate_readouts is for X */
+	end_step = first_step + tsc_steps;
+	for (i = end_step - ts_dev->coordinate_readouts; i < end_step; i++) {
+		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
+		titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
+	}
+
+	config = 0;
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_AVG_16 | ts_dev->bit_yn |
+			STEPCONFIG_INM_ADCREFM;
+	switch (ts_dev->wires) {
+	case 4:
+		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
+		break;
+	case 5:
+		config |= ts_dev->bit_xp | STEPCONFIG_INP_AN4 |
+				ts_dev->bit_xn | ts_dev->bit_yp;
+		break;
+	case 8:
+		config |= ts_dev->bit_yp | STEPCONFIG_INP(ts_dev->inp_xp);
+		break;
+	}
+
+	/* 1 ... coordinate_readouts is for Y */
+	end_step = first_step + ts_dev->coordinate_readouts;
+	for (i = first_step; i < end_step; i++) {
+		titsc_writel(ts_dev, REG_STEPCONFIG(i), config);
+		titsc_writel(ts_dev, REG_STEPDELAY(i), STEPCONFIG_OPENDLY);
+	}
+
+	/* Make CHARGECONFIG same as IDLECONFIG */
+
+	config = titsc_readl(ts_dev, REG_IDLECONFIG);
+	titsc_writel(ts_dev, REG_CHARGECONFIG, config);
+	titsc_writel(ts_dev, REG_CHARGEDELAY, ts_dev->charge_delay);
+
+	/* coordinate_readouts + 1 ... coordinate_readouts + 2 is for Z */
+	config = STEPCONFIG_MODE_HWSYNC |
+			STEPCONFIG_AVG_16 | ts_dev->bit_yp |
+			ts_dev->bit_xn | STEPCONFIG_INM_ADCREFM |
+			STEPCONFIG_INP(ts_dev->inp_xp);
+	titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
+	titsc_writel(ts_dev, REG_STEPDELAY(end_step),
+			STEPCONFIG_OPENDLY);
+
+	end_step++;
+	config |= STEPCONFIG_INP(ts_dev->inp_yn);
+	titsc_writel(ts_dev, REG_STEPCONFIG(end_step), config);
+	titsc_writel(ts_dev, REG_STEPDELAY(end_step),
+			STEPCONFIG_OPENDLY);
+
+	/* The steps end ... end - readouts * 2 + 2 and bit 0 for TS_Charge */
+	stepenable = 1;
+	for (i = 0; i < tsc_steps; i++)
+		stepenable |= 1 << (first_step + i + 1);
+
+	ts_dev->step_mask = stepenable;
+	am335x_tsc_se_set_cache(ts_dev->mfd_tscadc, ts_dev->step_mask);
+}
+
+static int titsc_cmp_coord(const void *a, const void *b)
+{
+	return *(int *)a - *(int *)b;
+}
+
+static void titsc_read_coordinates(struct titsc *ts_dev,
+		u32 *x, u32 *y, u32 *z1, u32 *z2)
+{
+	unsigned int yvals[7], xvals[7];
+	unsigned int i, xsum = 0, ysum = 0;
+	unsigned int creads = ts_dev->coordinate_readouts;
+
+	for (i = 0; i < creads; i++) {
+		yvals[i] = titsc_readl(ts_dev, REG_FIFO0);
+		yvals[i] &= 0xfff;
+	}
+
+	*z1 = titsc_readl(ts_dev, REG_FIFO0);
+	*z1 &= 0xfff;
+	*z2 = titsc_readl(ts_dev, REG_FIFO0);
+	*z2 &= 0xfff;
+
+	for (i = 0; i < creads; i++) {
+		xvals[i] = titsc_readl(ts_dev, REG_FIFO0);
+		xvals[i] &= 0xfff;
+	}
+
+	/*
+	 * If co-ordinates readouts is less than 4 then
+	 * report the average. In case of 4 or more
+	 * readouts, sort the co-ordinate samples, drop
+	 * min and max values and report the average of
+	 * remaining values.
+	 */
+	if (creads <=  3) {
+		for (i = 0; i < creads; i++) {
+			ysum += yvals[i];
+			xsum += xvals[i];
+		}
+		ysum /= creads;
+		xsum /= creads;
+	} else {
+		sort(yvals, creads, sizeof(unsigned int),
+		     titsc_cmp_coord, NULL);
+		sort(xvals, creads, sizeof(unsigned int),
+		     titsc_cmp_coord, NULL);
+		for (i = 1; i < creads - 1; i++) {
+			ysum += yvals[i];
+			xsum += xvals[i];
+		}
+		ysum /= creads - 2;
+		xsum /= creads - 2;
+	}
+	*y = ysum;
+	*x = xsum;
+}
+
+static irqreturn_t titsc_irq(int irq, void *dev)
+{
+	struct titsc *ts_dev = dev;
+	struct input_dev *input_dev = ts_dev->input;
+	unsigned int fsm, status, irqclr = 0;
+	unsigned int x = 0, y = 0;
+	unsigned int z1, z2, z;
+
+	status = titsc_readl(ts_dev, REG_RAWIRQSTATUS);
+	if (status & IRQENB_HW_PEN) {
+		ts_dev->pen_down = true;
+		titsc_writel(ts_dev, REG_IRQWAKEUP, 0x00);
+		titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+		irqclr |= IRQENB_HW_PEN;
+	}
+
+	if (status & IRQENB_PENUP) {
+		fsm = titsc_readl(ts_dev, REG_ADCFSM);
+		if (fsm == ADCFSM_STEPID) {
+			ts_dev->pen_down = false;
+			input_report_key(input_dev, BTN_TOUCH, 0);
+			input_report_abs(input_dev, ABS_PRESSURE, 0);
+			input_sync(input_dev);
+		} else {
+			ts_dev->pen_down = true;
+		}
+		irqclr |= IRQENB_PENUP;
+	}
+
+	if (status & IRQENB_EOS)
+		irqclr |= IRQENB_EOS;
+
+	/*
+	 * ADC and touchscreen share the IRQ line.
+	 * FIFO1 interrupts are used by ADC. Handle FIFO0 IRQs here only
+	 */
+	if (status & IRQENB_FIFO0THRES) {
+
+		titsc_read_coordinates(ts_dev, &x, &y, &z1, &z2);
+
+		if (ts_dev->pen_down && z1 != 0 && z2 != 0) {
+			/*
+			 * Calculate pressure using formula
+			 * Resistance(touch) = x plate resistance *
+			 * x postion/4096 * ((z2 / z1) - 1)
+			 */
+			z = z1 - z2;
+			z *= x;
+			z *= ts_dev->x_plate_resistance;
+			z /= z2;
+			z = (z + 2047) >> 12;
+
+			if (z <= MAX_12BIT) {
+				input_report_abs(input_dev, ABS_X, x);
+				input_report_abs(input_dev, ABS_Y, y);
+				input_report_abs(input_dev, ABS_PRESSURE, z);
+				input_report_key(input_dev, BTN_TOUCH, 1);
+				input_sync(input_dev);
+			}
+		}
+		irqclr |= IRQENB_FIFO0THRES;
+	}
+	if (irqclr) {
+		titsc_writel(ts_dev, REG_IRQSTATUS, irqclr);
+		if (status & IRQENB_EOS)
+			am335x_tsc_se_set_cache(ts_dev->mfd_tscadc,
+						ts_dev->step_mask);
+		return IRQ_HANDLED;
+	}
+	return IRQ_NONE;
+}
+
+static int titsc_parse_dt(struct platform_device *pdev,
+					struct titsc *ts_dev)
+{
+	struct device_node *node = pdev->dev.of_node;
+	int err;
+
+	if (!node)
+		return -EINVAL;
+
+	err = of_property_read_u32(node, "ti,wires", &ts_dev->wires);
+	if (err < 0)
+		return err;
+	switch (ts_dev->wires) {
+	case 4:
+	case 5:
+	case 8:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	err = of_property_read_u32(node, "ti,x-plate-resistance",
+			&ts_dev->x_plate_resistance);
+	if (err < 0)
+		return err;
+
+	/*
+	 * Try with the new binding first. If it fails, try again with
+	 * bogus, miss-spelled version.
+	 */
+	err = of_property_read_u32(node, "ti,coordinate-readouts",
+			&ts_dev->coordinate_readouts);
+	if (err < 0) {
+		dev_warn(&pdev->dev, "please use 'ti,coordinate-readouts' instead\n");
+		err = of_property_read_u32(node, "ti,coordiante-readouts",
+				&ts_dev->coordinate_readouts);
+	}
+
+	if (err < 0)
+		return err;
+
+	if (ts_dev->coordinate_readouts <= 0) {
+		dev_warn(&pdev->dev,
+			 "invalid co-ordinate readouts, resetting it to 5\n");
+		ts_dev->coordinate_readouts = 5;
+	}
+
+	err = of_property_read_u32(node, "ti,charge-delay",
+				   &ts_dev->charge_delay);
+	/*
+	 * If ti,charge-delay value is not specified, then use
+	 * CHARGEDLY_OPENDLY as the default value.
+	 */
+	if (err < 0) {
+		ts_dev->charge_delay = CHARGEDLY_OPENDLY;
+		dev_warn(&pdev->dev, "ti,charge-delay not specified\n");
+	}
+
+	return of_property_read_u32_array(node, "ti,wire-config",
+			ts_dev->config_inp, ARRAY_SIZE(ts_dev->config_inp));
+}
+
+/*
+ * The functions for inserting/removing driver as a module.
+ */
+
+static int titsc_probe(struct platform_device *pdev)
+{
+	struct titsc *ts_dev;
+	struct input_dev *input_dev;
+	struct ti_tscadc_dev *tscadc_dev = ti_tscadc_dev_get(pdev);
+	int err;
+
+	/* Allocate memory for device */
+	ts_dev = kzalloc(sizeof(struct titsc), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ts_dev || !input_dev) {
+		dev_err(&pdev->dev, "failed to allocate memory.\n");
+		err = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tscadc_dev->tsc = ts_dev;
+	ts_dev->mfd_tscadc = tscadc_dev;
+	ts_dev->input = input_dev;
+	ts_dev->irq = tscadc_dev->irq;
+
+	err = titsc_parse_dt(pdev, ts_dev);
+	if (err) {
+		dev_err(&pdev->dev, "Could not find valid DT data.\n");
+		goto err_free_mem;
+	}
+
+	err = request_irq(ts_dev->irq, titsc_irq,
+			  IRQF_SHARED, pdev->dev.driver->name, ts_dev);
+	if (err) {
+		dev_err(&pdev->dev, "failed to allocate irq.\n");
+		goto err_free_mem;
+	}
+
+	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_FIFO0THRES);
+	titsc_writel(ts_dev, REG_IRQENABLE, IRQENB_EOS);
+	err = titsc_config_wires(ts_dev);
+	if (err) {
+		dev_err(&pdev->dev, "wrong i/p wire configuration\n");
+		goto err_free_irq;
+	}
+	titsc_step_config(ts_dev);
+	titsc_writel(ts_dev, REG_FIFO0THR,
+			ts_dev->coordinate_readouts * 2 + 2 - 1);
+
+	input_dev->name = "ti-tsc";
+	input_dev->dev.parent = &pdev->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT, 0, 0);
+
+	/* register to the input system */
+	err = input_register_device(input_dev);
+	if (err)
+		goto err_free_irq;
+
+	platform_set_drvdata(pdev, ts_dev);
+	return 0;
+
+err_free_irq:
+	free_irq(ts_dev->irq, ts_dev);
+err_free_mem:
+	input_free_device(input_dev);
+	kfree(ts_dev);
+	return err;
+}
+
+static int titsc_remove(struct platform_device *pdev)
+{
+	struct titsc *ts_dev = platform_get_drvdata(pdev);
+	u32 steps;
+
+	free_irq(ts_dev->irq, ts_dev);
+
+	/* total steps followed by the enable mask */
+	steps = 2 * ts_dev->coordinate_readouts + 2;
+	steps = (1 << steps) - 1;
+	am335x_tsc_se_clr(ts_dev->mfd_tscadc, steps);
+
+	input_unregister_device(ts_dev->input);
+
+	kfree(ts_dev);
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int titsc_suspend(struct device *dev)
+{
+	struct titsc *ts_dev = dev_get_drvdata(dev);
+	struct ti_tscadc_dev *tscadc_dev;
+	unsigned int idle;
+
+	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
+	if (device_may_wakeup(tscadc_dev->dev)) {
+		idle = titsc_readl(ts_dev, REG_IRQENABLE);
+		titsc_writel(ts_dev, REG_IRQENABLE,
+				(idle | IRQENB_HW_PEN));
+		titsc_writel(ts_dev, REG_IRQWAKEUP, IRQWKUP_ENB);
+	}
+	return 0;
+}
+
+static int titsc_resume(struct device *dev)
+{
+	struct titsc *ts_dev = dev_get_drvdata(dev);
+	struct ti_tscadc_dev *tscadc_dev;
+
+	tscadc_dev = ti_tscadc_dev_get(to_platform_device(dev));
+	if (device_may_wakeup(tscadc_dev->dev)) {
+		titsc_writel(ts_dev, REG_IRQWAKEUP,
+				0x00);
+		titsc_writel(ts_dev, REG_IRQCLR, IRQENB_HW_PEN);
+	}
+	titsc_step_config(ts_dev);
+	titsc_writel(ts_dev, REG_FIFO0THR,
+			ts_dev->coordinate_readouts * 2 + 2 - 1);
+	return 0;
+}
+
+static const struct dev_pm_ops titsc_pm_ops = {
+	.suspend = titsc_suspend,
+	.resume  = titsc_resume,
+};
+#define TITSC_PM_OPS (&titsc_pm_ops)
+#else
+#define TITSC_PM_OPS NULL
+#endif
+
+static const struct of_device_id ti_tsc_dt_ids[] = {
+	{ .compatible = "ti,am3359-tsc", },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, ti_tsc_dt_ids);
+
+static struct platform_driver ti_tsc_driver = {
+	.probe	= titsc_probe,
+	.remove	= titsc_remove,
+	.driver	= {
+		.name   = "TI-am335x-tsc",
+		.pm	= TITSC_PM_OPS,
+		.of_match_table = ti_tsc_dt_ids,
+	},
+};
+module_platform_driver(ti_tsc_driver);
+
+MODULE_DESCRIPTION("TI touchscreen controller driver");
+MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/touchit213.c b/drivers/input/touchscreen/touchit213.c
new file mode 100644
index 0000000..c27cf8f
--- /dev/null
+++ b/drivers/input/touchscreen/touchit213.c
@@ -0,0 +1,218 @@
+/*
+ * Sahara TouchIT-213 serial touchscreen driver
+ *
+ * Copyright (c) 2007-2008 Claudio Nieder <private@claudio.ch>
+ *
+ * Based on Touchright driver (drivers/input/touchscreen/touchright.c)
+ * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ * Copyright (c) 2004 Vojtech Pavlik
+ * and Dan Streetman <ddstreet@ieee.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Sahara TouchIT-213 serial touchscreen driver"
+
+MODULE_AUTHOR("Claudio Nieder <private@claudio.ch>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+/*
+ * Data is received through COM1 at 9600bit/s,8bit,no parity in packets
+ * of 5 byte each.
+ *
+ *   +--------+   +--------+   +--------+   +--------+   +--------+
+ *   |1000000p|   |0xxxxxxx|   |0xxxxxxx|   |0yyyyyyy|   |0yyyyyyy|
+ *   +--------+   +--------+   +--------+   +--------+   +--------+
+ *                    MSB          LSB          MSB          LSB
+ *
+ * The value of p is 1 as long as the screen is touched and 0 when
+ * reporting the location where touching stopped, e.g. where the pen was
+ * lifted from the screen.
+ *
+ * When holding the screen in landscape mode as the BIOS text output is
+ * presented, x is the horizontal axis with values growing from left to
+ * right and y is the vertical axis with values growing from top to
+ * bottom.
+ *
+ * When holding the screen in portrait mode with the Sahara logo in its
+ * correct position, x ist the vertical axis with values growing from
+ * top to bottom and y is the horizontal axis with values growing from
+ * right to left.
+ */
+
+#define T213_FORMAT_TOUCH_BIT	0x01
+#define T213_FORMAT_STATUS_BYTE	0x80
+#define T213_FORMAT_STATUS_MASK	~T213_FORMAT_TOUCH_BIT
+
+/*
+ * On my Sahara Touch-IT 213 I have observed x values from 0 to 0x7f0
+ * and y values from 0x1d to 0x7e9, so the actual measurement is
+ * probably done with an 11 bit precision.
+ */
+#define T213_MIN_XC 0
+#define T213_MAX_XC 0x07ff
+#define T213_MIN_YC 0
+#define T213_MAX_YC 0x07ff
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct touchit213 {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char csum;
+	unsigned char data[5];
+	char phys[32];
+};
+
+static irqreturn_t touchit213_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct touchit213 *touchit213 = serio_get_drvdata(serio);
+	struct input_dev *dev = touchit213->dev;
+
+	touchit213->data[touchit213->idx] = data;
+
+	switch (touchit213->idx++) {
+	case 0:
+		if ((touchit213->data[0] & T213_FORMAT_STATUS_MASK) !=
+				T213_FORMAT_STATUS_BYTE) {
+			pr_debug("unsynchronized data: 0x%02x\n", data);
+			touchit213->idx = 0;
+		}
+		break;
+
+	case 4:
+		touchit213->idx = 0;
+		input_report_abs(dev, ABS_X,
+			(touchit213->data[1] << 7) | touchit213->data[2]);
+		input_report_abs(dev, ABS_Y,
+			(touchit213->data[3] << 7) | touchit213->data[4]);
+		input_report_key(dev, BTN_TOUCH,
+			touchit213->data[0] & T213_FORMAT_TOUCH_BIT);
+		input_sync(dev);
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * touchit213_disconnect() is the opposite of touchit213_connect()
+ */
+
+static void touchit213_disconnect(struct serio *serio)
+{
+	struct touchit213 *touchit213 = serio_get_drvdata(serio);
+
+	input_get_device(touchit213->dev);
+	input_unregister_device(touchit213->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(touchit213->dev);
+	kfree(touchit213);
+}
+
+/*
+ * touchit213_connect() is the routine that is called when someone adds a
+ * new serio device that supports the Touchright protocol and registers it as
+ * an input device.
+ */
+
+static int touchit213_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct touchit213 *touchit213;
+	struct input_dev *input_dev;
+	int err;
+
+	touchit213 = kzalloc(sizeof(struct touchit213), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!touchit213 || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	touchit213->serio = serio;
+	touchit213->dev = input_dev;
+	snprintf(touchit213->phys, sizeof(touchit213->phys),
+		 "%s/input0", serio->phys);
+
+	input_dev->name = "Sahara Touch-iT213 Serial TouchScreen";
+	input_dev->phys = touchit213->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_TOUCHIT213;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(touchit213->dev, ABS_X,
+			     T213_MIN_XC, T213_MAX_XC, 0, 0);
+	input_set_abs_params(touchit213->dev, ABS_Y,
+			     T213_MIN_YC, T213_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, touchit213);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(touchit213->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(touchit213);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id touchit213_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_TOUCHIT213,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, touchit213_serio_ids);
+
+static struct serio_driver touchit213_drv = {
+	.driver		= {
+		.name	= "touchit213",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= touchit213_serio_ids,
+	.interrupt	= touchit213_interrupt,
+	.connect	= touchit213_connect,
+	.disconnect	= touchit213_disconnect,
+};
+
+module_serio_driver(touchit213_drv);
diff --git a/drivers/input/touchscreen/touchright.c b/drivers/input/touchscreen/touchright.c
new file mode 100644
index 0000000..4000e52
--- /dev/null
+++ b/drivers/input/touchscreen/touchright.c
@@ -0,0 +1,178 @@
+/*
+ * Touchright serial touchscreen driver
+ *
+ * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ *
+ * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c)
+ * Copyright (c) 2004 Vojtech Pavlik
+ * and Dan Streetman <ddstreet@ieee.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Touchright serial touchscreen driver"
+
+MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define TR_FORMAT_TOUCH_BIT	0x01
+#define TR_FORMAT_STATUS_BYTE	0x40
+#define TR_FORMAT_STATUS_MASK	~TR_FORMAT_TOUCH_BIT
+
+#define TR_LENGTH 5
+
+#define TR_MIN_XC 0
+#define TR_MAX_XC 0x1ff
+#define TR_MIN_YC 0
+#define TR_MAX_YC 0x1ff
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct tr {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	unsigned char data[TR_LENGTH];
+	char phys[32];
+};
+
+static irqreturn_t tr_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct tr *tr = serio_get_drvdata(serio);
+	struct input_dev *dev = tr->dev;
+
+	tr->data[tr->idx] = data;
+
+	if ((tr->data[0] & TR_FORMAT_STATUS_MASK) == TR_FORMAT_STATUS_BYTE) {
+		if (++tr->idx == TR_LENGTH) {
+			input_report_abs(dev, ABS_X,
+				(tr->data[1] << 5) | (tr->data[2] >> 1));
+			input_report_abs(dev, ABS_Y,
+				(tr->data[3] << 5) | (tr->data[4] >> 1));
+			input_report_key(dev, BTN_TOUCH,
+				tr->data[0] & TR_FORMAT_TOUCH_BIT);
+			input_sync(dev);
+			tr->idx = 0;
+		}
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * tr_disconnect() is the opposite of tr_connect()
+ */
+
+static void tr_disconnect(struct serio *serio)
+{
+	struct tr *tr = serio_get_drvdata(serio);
+
+	input_get_device(tr->dev);
+	input_unregister_device(tr->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(tr->dev);
+	kfree(tr);
+}
+
+/*
+ * tr_connect() is the routine that is called when someone adds a
+ * new serio device that supports the Touchright protocol and registers it as
+ * an input device.
+ */
+
+static int tr_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct tr *tr;
+	struct input_dev *input_dev;
+	int err;
+
+	tr = kzalloc(sizeof(struct tr), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!tr || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	tr->serio = serio;
+	tr->dev = input_dev;
+	snprintf(tr->phys, sizeof(tr->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "Touchright Serial TouchScreen";
+	input_dev->phys = tr->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_TOUCHRIGHT;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(tr->dev, ABS_X, TR_MIN_XC, TR_MAX_XC, 0, 0);
+	input_set_abs_params(tr->dev, ABS_Y, TR_MIN_YC, TR_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, tr);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(tr->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(tr);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id tr_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_TOUCHRIGHT,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, tr_serio_ids);
+
+static struct serio_driver tr_drv = {
+	.driver		= {
+		.name	= "touchright",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= tr_serio_ids,
+	.interrupt	= tr_interrupt,
+	.connect	= tr_connect,
+	.disconnect	= tr_disconnect,
+};
+
+module_serio_driver(tr_drv);
diff --git a/drivers/input/touchscreen/touchwin.c b/drivers/input/touchscreen/touchwin.c
new file mode 100644
index 0000000..ba90f44
--- /dev/null
+++ b/drivers/input/touchscreen/touchwin.c
@@ -0,0 +1,185 @@
+/*
+ * Touchwindow serial touchscreen driver
+ *
+ * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com>
+ *
+ * Based on MicroTouch driver (drivers/input/touchscreen/mtouch.c)
+ * Copyright (c) 2004 Vojtech Pavlik
+ * and Dan Streetman <ddstreet@ieee.org>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+/*
+ * 2005/02/19 Rick Koch:
+ *   The Touchwindow I used is made by Edmark Corp. and
+ *   constantly outputs a stream of 0's unless it is touched.
+ *   It then outputs 3 bytes: X, Y, and a copy of Y.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define DRIVER_DESC	"Touchwindow serial touchscreen driver"
+
+MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+#define TW_LENGTH 3
+
+#define TW_MIN_XC 0
+#define TW_MAX_XC 0xff
+#define TW_MIN_YC 0
+#define TW_MAX_YC 0xff
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct tw {
+	struct input_dev *dev;
+	struct serio *serio;
+	int idx;
+	int touched;
+	unsigned char data[TW_LENGTH];
+	char phys[32];
+};
+
+static irqreturn_t tw_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct tw *tw = serio_get_drvdata(serio);
+	struct input_dev *dev = tw->dev;
+
+	if (data) {		/* touch */
+		tw->touched = 1;
+		tw->data[tw->idx++] = data;
+		/* verify length and that the two Y's are the same */
+		if (tw->idx == TW_LENGTH && tw->data[1] == tw->data[2]) {
+			input_report_abs(dev, ABS_X, tw->data[0]);
+			input_report_abs(dev, ABS_Y, tw->data[1]);
+			input_report_key(dev, BTN_TOUCH, 1);
+			input_sync(dev);
+			tw->idx = 0;
+		}
+	} else if (tw->touched) {	/* untouch */
+		input_report_key(dev, BTN_TOUCH, 0);
+		input_sync(dev);
+		tw->idx = 0;
+		tw->touched = 0;
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * tw_disconnect() is the opposite of tw_connect()
+ */
+
+static void tw_disconnect(struct serio *serio)
+{
+	struct tw *tw = serio_get_drvdata(serio);
+
+	input_get_device(tw->dev);
+	input_unregister_device(tw->dev);
+	serio_close(serio);
+	serio_set_drvdata(serio, NULL);
+	input_put_device(tw->dev);
+	kfree(tw);
+}
+
+/*
+ * tw_connect() is the routine that is called when someone adds a
+ * new serio device that supports the Touchwin protocol and registers it as
+ * an input device.
+ */
+
+static int tw_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct tw *tw;
+	struct input_dev *input_dev;
+	int err;
+
+	tw = kzalloc(sizeof(struct tw), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!tw || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	tw->serio = serio;
+	tw->dev = input_dev;
+	snprintf(tw->phys, sizeof(tw->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "Touchwindow Serial TouchScreen";
+	input_dev->phys = tw->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_TOUCHWIN;
+	input_dev->id.product = 0;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(tw->dev, ABS_X, TW_MIN_XC, TW_MAX_XC, 0, 0);
+	input_set_abs_params(tw->dev, ABS_Y, TW_MIN_YC, TW_MAX_YC, 0, 0);
+
+	serio_set_drvdata(serio, tw);
+
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = input_register_device(tw->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+ fail3:	serio_close(serio);
+ fail2:	serio_set_drvdata(serio, NULL);
+ fail1:	input_free_device(input_dev);
+	kfree(tw);
+	return err;
+}
+
+/*
+ * The serio driver structure.
+ */
+
+static struct serio_device_id tw_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_TOUCHWIN,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, tw_serio_ids);
+
+static struct serio_driver tw_drv = {
+	.driver		= {
+		.name	= "touchwin",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= tw_serio_ids,
+	.interrupt	= tw_interrupt,
+	.connect	= tw_connect,
+	.disconnect	= tw_disconnect,
+};
+
+module_serio_driver(tw_drv);
diff --git a/drivers/input/touchscreen/tps6507x-ts.c b/drivers/input/touchscreen/tps6507x-ts.c
new file mode 100644
index 0000000..a340bfc
--- /dev/null
+++ b/drivers/input/touchscreen/tps6507x-ts.c
@@ -0,0 +1,319 @@
+/*
+ * Touchscreen driver for the tps6507x chip.
+ *
+ * Copyright (c) 2009 RidgeRun (todd.fischer@ridgerun.com)
+ *
+ * Credits:
+ *
+ *    Using code from tsc2007, MtekVision Co., Ltd.
+ *
+ * For licencing details see kernel-base/COPYING
+ *
+ * TPS65070, TPS65073, TPS650731, and TPS650732 support
+ * 10 bit touch screen interface.
+ */
+
+#include <linux/module.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/tps6507x.h>
+#include <linux/input/tps6507x-ts.h>
+#include <linux/delay.h>
+
+#define TSC_DEFAULT_POLL_PERIOD 30 /* ms */
+#define TPS_DEFAULT_MIN_PRESSURE 0x30
+#define MAX_10BIT ((1 << 10) - 1)
+
+#define	TPS6507X_ADCONFIG_CONVERT_TS (TPS6507X_ADCONFIG_AD_ENABLE | \
+					 TPS6507X_ADCONFIG_START_CONVERSION | \
+					 TPS6507X_ADCONFIG_INPUT_REAL_TSC)
+#define	TPS6507X_ADCONFIG_POWER_DOWN_TS (TPS6507X_ADCONFIG_INPUT_REAL_TSC)
+
+struct ts_event {
+	u16	x;
+	u16	y;
+	u16	pressure;
+};
+
+struct tps6507x_ts {
+	struct device		*dev;
+	struct input_polled_dev	*poll_dev;
+	struct tps6507x_dev	*mfd;
+	char			phys[32];
+	struct ts_event		tc;
+	u16			min_pressure;
+	bool			pendown;
+};
+
+static int tps6507x_read_u8(struct tps6507x_ts *tsc, u8 reg, u8 *data)
+{
+	return tsc->mfd->read_dev(tsc->mfd, reg, 1, data);
+}
+
+static int tps6507x_write_u8(struct tps6507x_ts *tsc, u8 reg, u8 data)
+{
+	return tsc->mfd->write_dev(tsc->mfd, reg, 1, &data);
+}
+
+static s32 tps6507x_adc_conversion(struct tps6507x_ts *tsc,
+				   u8 tsc_mode, u16 *value)
+{
+	s32 ret;
+	u8 adc_status;
+	u8 result;
+
+	/* Route input signal to A/D converter */
+
+	ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE, tsc_mode);
+	if (ret) {
+		dev_err(tsc->dev, "TSC mode read failed\n");
+		goto err;
+	}
+
+	/* Start A/D conversion */
+
+	ret = tps6507x_write_u8(tsc, TPS6507X_REG_ADCONFIG,
+				TPS6507X_ADCONFIG_CONVERT_TS);
+	if (ret) {
+		dev_err(tsc->dev, "ADC config write failed\n");
+		return ret;
+	}
+
+	do {
+		ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADCONFIG,
+				       &adc_status);
+		if (ret) {
+			dev_err(tsc->dev, "ADC config read failed\n");
+			goto err;
+		}
+	} while (adc_status & TPS6507X_ADCONFIG_START_CONVERSION);
+
+	ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_2, &result);
+	if (ret) {
+		dev_err(tsc->dev, "ADC result 2 read failed\n");
+		goto err;
+	}
+
+	*value = (result & TPS6507X_REG_ADRESULT_2_MASK) << 8;
+
+	ret = tps6507x_read_u8(tsc, TPS6507X_REG_ADRESULT_1, &result);
+	if (ret) {
+		dev_err(tsc->dev, "ADC result 1 read failed\n");
+		goto err;
+	}
+
+	*value |= result;
+
+	dev_dbg(tsc->dev, "TSC channel %d = 0x%X\n", tsc_mode, *value);
+
+err:
+	return ret;
+}
+
+/* Need to call tps6507x_adc_standby() after using A/D converter for the
+ * touch screen interrupt to work properly.
+ */
+
+static s32 tps6507x_adc_standby(struct tps6507x_ts *tsc)
+{
+	s32 ret;
+	s32 loops = 0;
+	u8 val;
+
+	ret = tps6507x_write_u8(tsc,  TPS6507X_REG_ADCONFIG,
+				TPS6507X_ADCONFIG_INPUT_TSC);
+	if (ret)
+		return ret;
+
+	ret = tps6507x_write_u8(tsc, TPS6507X_REG_TSCMODE,
+				TPS6507X_TSCMODE_STANDBY);
+	if (ret)
+		return ret;
+
+	ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val);
+	if (ret)
+		return ret;
+
+	while (val & TPS6507X_REG_TSC_INT) {
+		mdelay(10);
+		ret = tps6507x_read_u8(tsc, TPS6507X_REG_INT, &val);
+		if (ret)
+			return ret;
+		loops++;
+	}
+
+	return ret;
+}
+
+static void tps6507x_ts_poll(struct input_polled_dev *poll_dev)
+{
+	struct tps6507x_ts *tsc = poll_dev->private;
+	struct input_dev *input_dev = poll_dev->input;
+	bool pendown;
+	s32 ret;
+
+	ret = tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_PRESSURE,
+				      &tsc->tc.pressure);
+	if (ret)
+		goto done;
+
+	pendown = tsc->tc.pressure > tsc->min_pressure;
+
+	if (unlikely(!pendown && tsc->pendown)) {
+		dev_dbg(tsc->dev, "UP\n");
+		input_report_key(input_dev, BTN_TOUCH, 0);
+		input_report_abs(input_dev, ABS_PRESSURE, 0);
+		input_sync(input_dev);
+		tsc->pendown = false;
+	}
+
+	if (pendown) {
+
+		if (!tsc->pendown) {
+			dev_dbg(tsc->dev, "DOWN\n");
+			input_report_key(input_dev, BTN_TOUCH, 1);
+		} else
+			dev_dbg(tsc->dev, "still down\n");
+
+		ret =  tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_X_POSITION,
+					       &tsc->tc.x);
+		if (ret)
+			goto done;
+
+		ret =  tps6507x_adc_conversion(tsc, TPS6507X_TSCMODE_Y_POSITION,
+					       &tsc->tc.y);
+		if (ret)
+			goto done;
+
+		input_report_abs(input_dev, ABS_X, tsc->tc.x);
+		input_report_abs(input_dev, ABS_Y, tsc->tc.y);
+		input_report_abs(input_dev, ABS_PRESSURE, tsc->tc.pressure);
+		input_sync(input_dev);
+		tsc->pendown = true;
+	}
+
+done:
+	tps6507x_adc_standby(tsc);
+}
+
+static int tps6507x_ts_probe(struct platform_device *pdev)
+{
+	struct tps6507x_dev *tps6507x_dev = dev_get_drvdata(pdev->dev.parent);
+	const struct tps6507x_board *tps_board;
+	const struct touchscreen_init_data *init_data;
+	struct tps6507x_ts *tsc;
+	struct input_polled_dev *poll_dev;
+	struct input_dev *input_dev;
+	int error;
+
+	/*
+	 * tps_board points to pmic related constants
+	 * coming from the board-evm file.
+	 */
+	tps_board = dev_get_platdata(tps6507x_dev->dev);
+	if (!tps_board) {
+		dev_err(tps6507x_dev->dev,
+			"Could not find tps6507x platform data\n");
+		return -ENODEV;
+	}
+
+	/*
+	 * init_data points to array of regulator_init structures
+	 * coming from the board-evm file.
+	 */
+	init_data = tps_board->tps6507x_ts_init_data;
+
+	tsc = kzalloc(sizeof(struct tps6507x_ts), GFP_KERNEL);
+	if (!tsc) {
+		dev_err(tps6507x_dev->dev, "failed to allocate driver data\n");
+		return -ENOMEM;
+	}
+
+	tsc->mfd = tps6507x_dev;
+	tsc->dev = tps6507x_dev->dev;
+	tsc->min_pressure = init_data ?
+			init_data->min_pressure : TPS_DEFAULT_MIN_PRESSURE;
+
+	snprintf(tsc->phys, sizeof(tsc->phys),
+		 "%s/input0", dev_name(tsc->dev));
+
+	poll_dev = input_allocate_polled_device();
+	if (!poll_dev) {
+		dev_err(tsc->dev, "Failed to allocate polled input device.\n");
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	tsc->poll_dev = poll_dev;
+
+	poll_dev->private = tsc;
+	poll_dev->poll = tps6507x_ts_poll;
+	poll_dev->poll_interval = init_data ?
+			init_data->poll_period : TSC_DEFAULT_POLL_PERIOD;
+
+	input_dev = poll_dev->input;
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_10BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_10BIT, 0, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_10BIT, 0, 0);
+
+	input_dev->name = "TPS6507x Touchscreen";
+	input_dev->phys = tsc->phys;
+	input_dev->dev.parent = tsc->dev;
+	input_dev->id.bustype = BUS_I2C;
+	if (init_data) {
+		input_dev->id.vendor = init_data->vendor;
+		input_dev->id.product = init_data->product;
+		input_dev->id.version = init_data->version;
+	}
+
+	error = tps6507x_adc_standby(tsc);
+	if (error)
+		goto err_free_polled_dev;
+
+	error = input_register_polled_device(poll_dev);
+	if (error)
+		goto err_free_polled_dev;
+
+	platform_set_drvdata(pdev, tsc);
+
+	return 0;
+
+err_free_polled_dev:
+	input_free_polled_device(poll_dev);
+err_free_mem:
+	kfree(tsc);
+	return error;
+}
+
+static int tps6507x_ts_remove(struct platform_device *pdev)
+{
+	struct tps6507x_ts *tsc = platform_get_drvdata(pdev);
+	struct input_polled_dev *poll_dev = tsc->poll_dev;
+
+	input_unregister_polled_device(poll_dev);
+	input_free_polled_device(poll_dev);
+
+	kfree(tsc);
+
+	return 0;
+}
+
+static struct platform_driver tps6507x_ts_driver = {
+	.driver = {
+		.name = "tps6507x-ts",
+	},
+	.probe = tps6507x_ts_probe,
+	.remove = tps6507x_ts_remove,
+};
+module_platform_driver(tps6507x_ts_driver);
+
+MODULE_AUTHOR("Todd Fischer <todd.fischer@ridgerun.com>");
+MODULE_DESCRIPTION("TPS6507x - TouchScreen driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:tps6507x-ts");
diff --git a/drivers/input/touchscreen/tsc2004.c b/drivers/input/touchscreen/tsc2004.c
new file mode 100644
index 0000000..6fe55d5
--- /dev/null
+++ b/drivers/input/touchscreen/tsc2004.c
@@ -0,0 +1,88 @@
+/*
+ * TSC2004 touchscreen driver
+ *
+ * Copyright (C) 2015 QWERTY Embedded Design
+ * Copyright (C) 2015 EMAC Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/of.h>
+#include <linux/i2c.h>
+#include <linux/regmap.h>
+#include "tsc200x-core.h"
+
+static const struct input_id tsc2004_input_id = {
+	.bustype = BUS_I2C,
+	.product = 2004,
+};
+
+static int tsc2004_cmd(struct device *dev, u8 cmd)
+{
+	u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd;
+	s32 data;
+	struct i2c_client *i2c = to_i2c_client(dev);
+
+	data = i2c_smbus_write_byte(i2c, tx);
+	if (data < 0) {
+		dev_err(dev, "%s: failed, command: %x i2c error: %d\n",
+			__func__, cmd, data);
+		return data;
+	}
+
+	return 0;
+}
+
+static int tsc2004_probe(struct i2c_client *i2c,
+			 const struct i2c_device_id *id)
+
+{
+	return tsc200x_probe(&i2c->dev, i2c->irq, &tsc2004_input_id,
+			     devm_regmap_init_i2c(i2c, &tsc200x_regmap_config),
+			     tsc2004_cmd);
+}
+
+static int tsc2004_remove(struct i2c_client *i2c)
+{
+	return tsc200x_remove(&i2c->dev);
+}
+
+static const struct i2c_device_id tsc2004_idtable[] = {
+	{ "tsc2004", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, tsc2004_idtable);
+
+#ifdef CONFIG_OF
+static const struct of_device_id tsc2004_of_match[] = {
+	{ .compatible = "ti,tsc2004" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tsc2004_of_match);
+#endif
+
+static struct i2c_driver tsc2004_driver = {
+	.driver = {
+		.name   = "tsc2004",
+		.of_match_table = of_match_ptr(tsc2004_of_match),
+		.pm     = &tsc200x_pm_ops,
+	},
+	.id_table       = tsc2004_idtable,
+	.probe          = tsc2004_probe,
+	.remove         = tsc2004_remove,
+};
+module_i2c_driver(tsc2004_driver);
+
+MODULE_AUTHOR("Michael Welling <mwelling@ieee.org>");
+MODULE_DESCRIPTION("TSC2004 Touchscreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/tsc2005.c b/drivers/input/touchscreen/tsc2005.c
new file mode 100644
index 0000000..f2c5f0e
--- /dev/null
+++ b/drivers/input/touchscreen/tsc2005.c
@@ -0,0 +1,93 @@
+/*
+ * TSC2005 touchscreen driver
+ *
+ * Copyright (C) 2006-2010 Nokia Corporation
+ * Copyright (C) 2015 QWERTY Embedded Design
+ * Copyright (C) 2015 EMAC Inc.
+ *
+ * Based on original tsc2005.c by Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/spi/spi.h>
+#include <linux/regmap.h>
+#include "tsc200x-core.h"
+
+static const struct input_id tsc2005_input_id = {
+	.bustype = BUS_SPI,
+	.product = 2005,
+};
+
+static int tsc2005_cmd(struct device *dev, u8 cmd)
+{
+	u8 tx = TSC200X_CMD | TSC200X_CMD_12BIT | cmd;
+	struct spi_transfer xfer = {
+		.tx_buf         = &tx,
+		.len            = 1,
+		.bits_per_word  = 8,
+	};
+	struct spi_message msg;
+	struct spi_device *spi = to_spi_device(dev);
+	int error;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	error = spi_sync(spi, &msg);
+	if (error) {
+		dev_err(dev, "%s: failed, command: %x, spi error: %d\n",
+			__func__, cmd, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int tsc2005_probe(struct spi_device *spi)
+{
+	int error;
+
+	spi->mode = SPI_MODE_0;
+	spi->bits_per_word = 8;
+	if (!spi->max_speed_hz)
+		spi->max_speed_hz = TSC2005_SPI_MAX_SPEED_HZ;
+
+	error = spi_setup(spi);
+	if (error)
+		return error;
+
+	return tsc200x_probe(&spi->dev, spi->irq, &tsc2005_input_id,
+			     devm_regmap_init_spi(spi, &tsc200x_regmap_config),
+			     tsc2005_cmd);
+}
+
+static int tsc2005_remove(struct spi_device *spi)
+{
+	return tsc200x_remove(&spi->dev);
+}
+
+static struct spi_driver tsc2005_driver = {
+	.driver	= {
+		.name	= "tsc2005",
+		.pm	= &tsc200x_pm_ops,
+	},
+	.probe	= tsc2005_probe,
+	.remove	= tsc2005_remove,
+};
+module_spi_driver(tsc2005_driver);
+
+MODULE_AUTHOR("Michael Welling <mwelling@ieee.org>");
+MODULE_DESCRIPTION("TSC2005 Touchscreen Driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("spi:tsc2005");
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
new file mode 100644
index 0000000..5d0cd51
--- /dev/null
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -0,0 +1,496 @@
+/*
+ * drivers/input/touchscreen/tsc2007.c
+ *
+ * Copyright (c) 2008 MtekVision Co., Ltd.
+ *	Kwangwoo Lee <kwlee@mtekvision.com>
+ *
+ * Using code from:
+ *  - ads7846.c
+ *	Copyright (c) 2005 David Brownell
+ *	Copyright (c) 2006 Nokia Corporation
+ *  - corgi_ts.c
+ *	Copyright (C) 2004-2005 Richard Purdie
+ *  - omap_ts.[hc], ads7846.h, ts_osk.c
+ *	Copyright (C) 2002 MontaVista Software
+ *	Copyright (C) 2004 Texas Instruments
+ *	Copyright (C) 2005 Dirk Behme
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/i2c/tsc2007.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_gpio.h>
+
+#define TSC2007_MEASURE_TEMP0		(0x0 << 4)
+#define TSC2007_MEASURE_AUX		(0x2 << 4)
+#define TSC2007_MEASURE_TEMP1		(0x4 << 4)
+#define TSC2007_ACTIVATE_XN		(0x8 << 4)
+#define TSC2007_ACTIVATE_YN		(0x9 << 4)
+#define TSC2007_ACTIVATE_YP_XN		(0xa << 4)
+#define TSC2007_SETUP			(0xb << 4)
+#define TSC2007_MEASURE_X		(0xc << 4)
+#define TSC2007_MEASURE_Y		(0xd << 4)
+#define TSC2007_MEASURE_Z1		(0xe << 4)
+#define TSC2007_MEASURE_Z2		(0xf << 4)
+
+#define TSC2007_POWER_OFF_IRQ_EN	(0x0 << 2)
+#define TSC2007_ADC_ON_IRQ_DIS0		(0x1 << 2)
+#define TSC2007_ADC_OFF_IRQ_EN		(0x2 << 2)
+#define TSC2007_ADC_ON_IRQ_DIS1		(0x3 << 2)
+
+#define TSC2007_12BIT			(0x0 << 1)
+#define TSC2007_8BIT			(0x1 << 1)
+
+#define	MAX_12BIT			((1 << 12) - 1)
+
+#define ADC_ON_12BIT	(TSC2007_12BIT | TSC2007_ADC_ON_IRQ_DIS0)
+
+#define READ_Y		(ADC_ON_12BIT | TSC2007_MEASURE_Y)
+#define READ_Z1		(ADC_ON_12BIT | TSC2007_MEASURE_Z1)
+#define READ_Z2		(ADC_ON_12BIT | TSC2007_MEASURE_Z2)
+#define READ_X		(ADC_ON_12BIT | TSC2007_MEASURE_X)
+#define PWRDOWN		(TSC2007_12BIT | TSC2007_POWER_OFF_IRQ_EN)
+
+struct ts_event {
+	u16	x;
+	u16	y;
+	u16	z1, z2;
+};
+
+struct tsc2007 {
+	struct input_dev	*input;
+	char			phys[32];
+
+	struct i2c_client	*client;
+
+	u16			model;
+	u16			x_plate_ohms;
+	u16			max_rt;
+	unsigned long		poll_period; /* in jiffies */
+	int			fuzzx;
+	int			fuzzy;
+	int			fuzzz;
+
+	unsigned		gpio;
+	int			irq;
+
+	wait_queue_head_t	wait;
+	bool			stopped;
+
+	int			(*get_pendown_state)(struct device *);
+	void			(*clear_penirq)(void);
+};
+
+static inline int tsc2007_xfer(struct tsc2007 *tsc, u8 cmd)
+{
+	s32 data;
+	u16 val;
+
+	data = i2c_smbus_read_word_data(tsc->client, cmd);
+	if (data < 0) {
+		dev_err(&tsc->client->dev, "i2c io error: %d\n", data);
+		return data;
+	}
+
+	/* The protocol and raw data format from i2c interface:
+	 * S Addr Wr [A] Comm [A] S Addr Rd [A] [DataLow] A [DataHigh] NA P
+	 * Where DataLow has [D11-D4], DataHigh has [D3-D0 << 4 | Dummy 4bit].
+	 */
+	val = swab16(data) >> 4;
+
+	dev_dbg(&tsc->client->dev, "data: 0x%x, val: 0x%x\n", data, val);
+
+	return val;
+}
+
+static void tsc2007_read_values(struct tsc2007 *tsc, struct ts_event *tc)
+{
+	/* y- still on; turn on only y+ (and ADC) */
+	tc->y = tsc2007_xfer(tsc, READ_Y);
+
+	/* turn y- off, x+ on, then leave in lowpower */
+	tc->x = tsc2007_xfer(tsc, READ_X);
+
+	/* turn y+ off, x- on; we'll use formula #1 */
+	tc->z1 = tsc2007_xfer(tsc, READ_Z1);
+	tc->z2 = tsc2007_xfer(tsc, READ_Z2);
+
+	/* Prepare for next touch reading - power down ADC, enable PENIRQ */
+	tsc2007_xfer(tsc, PWRDOWN);
+}
+
+static u32 tsc2007_calculate_pressure(struct tsc2007 *tsc, struct ts_event *tc)
+{
+	u32 rt = 0;
+
+	/* range filtering */
+	if (tc->x == MAX_12BIT)
+		tc->x = 0;
+
+	if (likely(tc->x && tc->z1)) {
+		/* compute touch pressure resistance using equation #1 */
+		rt = tc->z2 - tc->z1;
+		rt *= tc->x;
+		rt *= tsc->x_plate_ohms;
+		rt /= tc->z1;
+		rt = (rt + 2047) >> 12;
+	}
+
+	return rt;
+}
+
+static bool tsc2007_is_pen_down(struct tsc2007 *ts)
+{
+	/*
+	 * NOTE: We can't rely on the pressure to determine the pen down
+	 * state, even though this controller has a pressure sensor.
+	 * The pressure value can fluctuate for quite a while after
+	 * lifting the pen and in some cases may not even settle at the
+	 * expected value.
+	 *
+	 * The only safe way to check for the pen up condition is in the
+	 * work function by reading the pen signal state (it's a GPIO
+	 * and IRQ). Unfortunately such callback is not always available,
+	 * in that case we assume that the pen is down and expect caller
+	 * to fall back on the pressure reading.
+	 */
+
+	if (!ts->get_pendown_state)
+		return true;
+
+	return ts->get_pendown_state(&ts->client->dev);
+}
+
+static irqreturn_t tsc2007_soft_irq(int irq, void *handle)
+{
+	struct tsc2007 *ts = handle;
+	struct input_dev *input = ts->input;
+	struct ts_event tc;
+	u32 rt;
+
+	while (!ts->stopped && tsc2007_is_pen_down(ts)) {
+
+		/* pen is down, continue with the measurement */
+		tsc2007_read_values(ts, &tc);
+
+		rt = tsc2007_calculate_pressure(ts, &tc);
+
+		if (!rt && !ts->get_pendown_state) {
+			/*
+			 * If pressure reported is 0 and we don't have
+			 * callback to check pendown state, we have to
+			 * assume that pen was lifted up.
+			 */
+			break;
+		}
+
+		if (rt <= ts->max_rt) {
+			dev_dbg(&ts->client->dev,
+				"DOWN point(%4d,%4d), pressure (%4u)\n",
+				tc.x, tc.y, rt);
+
+			input_report_key(input, BTN_TOUCH, 1);
+			input_report_abs(input, ABS_X, tc.x);
+			input_report_abs(input, ABS_Y, tc.y);
+			input_report_abs(input, ABS_PRESSURE, rt);
+
+			input_sync(input);
+
+		} else {
+			/*
+			 * Sample found inconsistent by debouncing or pressure is
+			 * beyond the maximum. Don't report it to user space,
+			 * repeat at least once more the measurement.
+			 */
+			dev_dbg(&ts->client->dev, "ignored pressure %d\n", rt);
+		}
+
+		wait_event_timeout(ts->wait, ts->stopped, ts->poll_period);
+	}
+
+	dev_dbg(&ts->client->dev, "UP\n");
+
+	input_report_key(input, BTN_TOUCH, 0);
+	input_report_abs(input, ABS_PRESSURE, 0);
+	input_sync(input);
+
+	if (ts->clear_penirq)
+		ts->clear_penirq();
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t tsc2007_hard_irq(int irq, void *handle)
+{
+	struct tsc2007 *ts = handle;
+
+	if (tsc2007_is_pen_down(ts))
+		return IRQ_WAKE_THREAD;
+
+	if (ts->clear_penirq)
+		ts->clear_penirq();
+
+	return IRQ_HANDLED;
+}
+
+static void tsc2007_stop(struct tsc2007 *ts)
+{
+	ts->stopped = true;
+	mb();
+	wake_up(&ts->wait);
+
+	disable_irq(ts->irq);
+}
+
+static int tsc2007_open(struct input_dev *input_dev)
+{
+	struct tsc2007 *ts = input_get_drvdata(input_dev);
+	int err;
+
+	ts->stopped = false;
+	mb();
+
+	enable_irq(ts->irq);
+
+	/* Prepare for touch readings - power down ADC and enable PENIRQ */
+	err = tsc2007_xfer(ts, PWRDOWN);
+	if (err < 0) {
+		tsc2007_stop(ts);
+		return err;
+	}
+
+	return 0;
+}
+
+static void tsc2007_close(struct input_dev *input_dev)
+{
+	struct tsc2007 *ts = input_get_drvdata(input_dev);
+
+	tsc2007_stop(ts);
+}
+
+#ifdef CONFIG_OF
+static int tsc2007_get_pendown_state_gpio(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct tsc2007 *ts = i2c_get_clientdata(client);
+
+	return !gpio_get_value(ts->gpio);
+}
+
+static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts)
+{
+	struct device_node *np = client->dev.of_node;
+	u32 val32;
+	u64 val64;
+
+	if (!np) {
+		dev_err(&client->dev, "missing device tree data\n");
+		return -EINVAL;
+	}
+
+	if (!of_property_read_u32(np, "ti,max-rt", &val32))
+		ts->max_rt = val32;
+	else
+		ts->max_rt = MAX_12BIT;
+
+	if (!of_property_read_u32(np, "ti,fuzzx", &val32))
+		ts->fuzzx = val32;
+
+	if (!of_property_read_u32(np, "ti,fuzzy", &val32))
+		ts->fuzzy = val32;
+
+	if (!of_property_read_u32(np, "ti,fuzzz", &val32))
+		ts->fuzzz = val32;
+
+	if (!of_property_read_u64(np, "ti,poll-period", &val64))
+		ts->poll_period = msecs_to_jiffies(val64);
+	else
+		ts->poll_period = msecs_to_jiffies(1);
+
+	if (!of_property_read_u32(np, "ti,x-plate-ohms", &val32)) {
+		ts->x_plate_ohms = val32;
+	} else {
+		dev_err(&client->dev, "missing ti,x-plate-ohms devicetree property.");
+		return -EINVAL;
+	}
+
+	ts->gpio = of_get_gpio(np, 0);
+	if (gpio_is_valid(ts->gpio))
+		ts->get_pendown_state = tsc2007_get_pendown_state_gpio;
+	else
+		dev_warn(&client->dev,
+			 "GPIO not specified in DT (of_get_gpio returned %d)\n",
+			 ts->gpio);
+
+	return 0;
+}
+#else
+static int tsc2007_probe_dt(struct i2c_client *client, struct tsc2007 *ts)
+{
+	dev_err(&client->dev, "platform data is required!\n");
+	return -EINVAL;
+}
+#endif
+
+static int tsc2007_probe_pdev(struct i2c_client *client, struct tsc2007 *ts,
+			      const struct tsc2007_platform_data *pdata,
+			      const struct i2c_device_id *id)
+{
+	ts->model             = pdata->model;
+	ts->x_plate_ohms      = pdata->x_plate_ohms;
+	ts->max_rt            = pdata->max_rt ? : MAX_12BIT;
+	ts->poll_period       = msecs_to_jiffies(pdata->poll_period ? : 1);
+	ts->get_pendown_state = pdata->get_pendown_state;
+	ts->clear_penirq      = pdata->clear_penirq;
+	ts->fuzzx             = pdata->fuzzx;
+	ts->fuzzy             = pdata->fuzzy;
+	ts->fuzzz             = pdata->fuzzz;
+
+	if (pdata->x_plate_ohms == 0) {
+		dev_err(&client->dev, "x_plate_ohms is not set up in platform data");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void tsc2007_call_exit_platform_hw(void *data)
+{
+	struct device *dev = data;
+	const struct tsc2007_platform_data *pdata = dev_get_platdata(dev);
+
+	pdata->exit_platform_hw();
+}
+
+static int tsc2007_probe(struct i2c_client *client,
+			 const struct i2c_device_id *id)
+{
+	const struct tsc2007_platform_data *pdata = dev_get_platdata(&client->dev);
+	struct tsc2007 *ts;
+	struct input_dev *input_dev;
+	int err;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_READ_WORD_DATA))
+		return -EIO;
+
+	ts = devm_kzalloc(&client->dev, sizeof(struct tsc2007), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	if (pdata)
+		err = tsc2007_probe_pdev(client, ts, pdata, id);
+	else
+		err = tsc2007_probe_dt(client, ts);
+	if (err)
+		return err;
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, ts);
+
+	ts->client = client;
+	ts->irq = client->irq;
+	ts->input = input_dev;
+	init_waitqueue_head(&ts->wait);
+
+	snprintf(ts->phys, sizeof(ts->phys),
+		 "%s/input0", dev_name(&client->dev));
+
+	input_dev->name = "TSC2007 Touchscreen";
+	input_dev->phys = ts->phys;
+	input_dev->id.bustype = BUS_I2C;
+
+	input_dev->open = tsc2007_open;
+	input_dev->close = tsc2007_close;
+
+	input_set_drvdata(input_dev, ts);
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, ts->fuzzx, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, ts->fuzzy, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, MAX_12BIT,
+			     ts->fuzzz, 0);
+
+	if (pdata) {
+		if (pdata->exit_platform_hw) {
+			err = devm_add_action(&client->dev,
+					      tsc2007_call_exit_platform_hw,
+					      &client->dev);
+			if (err) {
+				dev_err(&client->dev,
+					"Failed to register exit_platform_hw action, %d\n",
+					err);
+				return err;
+			}
+		}
+
+		if (pdata->init_platform_hw)
+			pdata->init_platform_hw();
+	}
+
+	err = devm_request_threaded_irq(&client->dev, ts->irq,
+					tsc2007_hard_irq, tsc2007_soft_irq,
+					IRQF_ONESHOT,
+					client->dev.driver->name, ts);
+	if (err) {
+		dev_err(&client->dev, "Failed to request irq %d: %d\n",
+			ts->irq, err);
+		return err;
+	}
+
+	tsc2007_stop(ts);
+
+	err = input_register_device(input_dev);
+	if (err) {
+		dev_err(&client->dev,
+			"Failed to register input device: %d\n", err);
+		return err;
+	}
+
+	return 0;
+}
+
+static const struct i2c_device_id tsc2007_idtable[] = {
+	{ "tsc2007", 0 },
+	{ }
+};
+
+MODULE_DEVICE_TABLE(i2c, tsc2007_idtable);
+
+#ifdef CONFIG_OF
+static const struct of_device_id tsc2007_of_match[] = {
+	{ .compatible = "ti,tsc2007" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, tsc2007_of_match);
+#endif
+
+static struct i2c_driver tsc2007_driver = {
+	.driver = {
+		.name	= "tsc2007",
+		.of_match_table = of_match_ptr(tsc2007_of_match),
+	},
+	.id_table	= tsc2007_idtable,
+	.probe		= tsc2007_probe,
+};
+
+module_i2c_driver(tsc2007_driver);
+
+MODULE_AUTHOR("Kwangwoo Lee <kwlee@mtekvision.com>");
+MODULE_DESCRIPTION("TSC2007 TouchScreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/tsc200x-core.c b/drivers/input/touchscreen/tsc200x-core.c
new file mode 100644
index 0000000..dfa7f1c
--- /dev/null
+++ b/drivers/input/touchscreen/tsc200x-core.c
@@ -0,0 +1,674 @@
+/*
+ * TSC2004/TSC2005 touchscreen driver core
+ *
+ * Copyright (C) 2006-2010 Nokia Corporation
+ * Copyright (C) 2015 QWERTY Embedded Design
+ * Copyright (C) 2015 EMAC Inc.
+ *
+ * Author: Lauri Leukkunen <lauri.leukkunen@nokia.com>
+ * based on TSC2301 driver by Klaus K. Pedersen <klaus.k.pedersen@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/of.h>
+#include <linux/spi/tsc2005.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regmap.h>
+#include <linux/gpio/consumer.h>
+#include "tsc200x-core.h"
+
+/*
+ * The touchscreen interface operates as follows:
+ *
+ * 1) Pen is pressed against the touchscreen.
+ * 2) TSC200X performs AD conversion.
+ * 3) After the conversion is done TSC200X drives DAV line down.
+ * 4) GPIO IRQ is received and tsc200x_irq_thread() is scheduled.
+ * 5) tsc200x_irq_thread() queues up a transfer to fetch the x, y, z1, z2
+ *    values.
+ * 6) tsc200x_irq_thread() reports coordinates to input layer and sets up
+ *    tsc200x_penup_timer() to be called after TSC200X_PENUP_TIME_MS (40ms).
+ * 7) When the penup timer expires, there have not been touch or DAV interrupts
+ *    during the last 40ms which means the pen has been lifted.
+ *
+ * ESD recovery via a hardware reset is done if the TSC200X doesn't respond
+ * after a configurable period (in ms) of activity. If esd_timeout is 0, the
+ * watchdog is disabled.
+ */
+
+static const struct regmap_range tsc200x_writable_ranges[] = {
+	regmap_reg_range(TSC200X_REG_AUX_HIGH, TSC200X_REG_CFR2),
+};
+
+static const struct regmap_access_table tsc200x_writable_table = {
+	.yes_ranges = tsc200x_writable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(tsc200x_writable_ranges),
+};
+
+const struct regmap_config tsc200x_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 16,
+	.reg_stride = 0x08,
+	.max_register = 0x78,
+	.read_flag_mask = TSC200X_REG_READ,
+	.write_flag_mask = TSC200X_REG_PND0,
+	.wr_table = &tsc200x_writable_table,
+	.use_single_rw = true,
+};
+EXPORT_SYMBOL_GPL(tsc200x_regmap_config);
+
+struct tsc200x_data {
+	u16 x;
+	u16 y;
+	u16 z1;
+	u16 z2;
+} __packed;
+#define TSC200X_DATA_REGS 4
+
+struct tsc200x {
+	struct device           *dev;
+	struct regmap		*regmap;
+	__u16                   bustype;
+
+	struct input_dev	*idev;
+	char			phys[32];
+
+	struct mutex		mutex;
+
+	/* raw copy of previous x,y,z */
+	int			in_x;
+	int			in_y;
+	int                     in_z1;
+	int			in_z2;
+
+	spinlock_t		lock;
+	struct timer_list	penup_timer;
+
+	unsigned int		esd_timeout;
+	struct delayed_work	esd_work;
+	unsigned long		last_valid_interrupt;
+
+	unsigned int		x_plate_ohm;
+
+	bool			opened;
+	bool			suspended;
+
+	bool			pen_down;
+
+	struct regulator	*vio;
+
+	struct gpio_desc	*reset_gpio;
+	void			(*set_reset)(bool enable);
+	int			(*tsc200x_cmd)(struct device *dev, u8 cmd);
+	int			irq;
+};
+
+static void tsc200x_update_pen_state(struct tsc200x *ts,
+				     int x, int y, int pressure)
+{
+	if (pressure) {
+		input_report_abs(ts->idev, ABS_X, x);
+		input_report_abs(ts->idev, ABS_Y, y);
+		input_report_abs(ts->idev, ABS_PRESSURE, pressure);
+		if (!ts->pen_down) {
+			input_report_key(ts->idev, BTN_TOUCH, !!pressure);
+			ts->pen_down = true;
+		}
+	} else {
+		input_report_abs(ts->idev, ABS_PRESSURE, 0);
+		if (ts->pen_down) {
+			input_report_key(ts->idev, BTN_TOUCH, 0);
+			ts->pen_down = false;
+		}
+	}
+	input_sync(ts->idev);
+	dev_dbg(ts->dev, "point(%4d,%4d), pressure (%4d)\n", x, y,
+		pressure);
+}
+
+static irqreturn_t tsc200x_irq_thread(int irq, void *_ts)
+{
+	struct tsc200x *ts = _ts;
+	unsigned long flags;
+	unsigned int pressure;
+	struct tsc200x_data tsdata;
+	int error;
+
+	/* read the coordinates */
+	error = regmap_bulk_read(ts->regmap, TSC200X_REG_X, &tsdata,
+				 TSC200X_DATA_REGS);
+	if (unlikely(error))
+		goto out;
+
+	/* validate position */
+	if (unlikely(tsdata.x > MAX_12BIT || tsdata.y > MAX_12BIT))
+		goto out;
+
+	/* Skip reading if the pressure components are out of range */
+	if (unlikely(tsdata.z1 == 0 || tsdata.z2 > MAX_12BIT))
+		goto out;
+	if (unlikely(tsdata.z1 >= tsdata.z2))
+		goto out;
+
+       /*
+	* Skip point if this is a pen down with the exact same values as
+	* the value before pen-up - that implies SPI fed us stale data
+	*/
+	if (!ts->pen_down &&
+	    ts->in_x == tsdata.x && ts->in_y == tsdata.y &&
+	    ts->in_z1 == tsdata.z1 && ts->in_z2 == tsdata.z2) {
+		goto out;
+	}
+
+	/*
+	 * At this point we are happy we have a valid and useful reading.
+	 * Remember it for later comparisons. We may now begin downsampling.
+	 */
+	ts->in_x = tsdata.x;
+	ts->in_y = tsdata.y;
+	ts->in_z1 = tsdata.z1;
+	ts->in_z2 = tsdata.z2;
+
+	/* Compute touch pressure resistance using equation #1 */
+	pressure = tsdata.x * (tsdata.z2 - tsdata.z1) / tsdata.z1;
+	pressure = pressure * ts->x_plate_ohm / 4096;
+	if (unlikely(pressure > MAX_12BIT))
+		goto out;
+
+	spin_lock_irqsave(&ts->lock, flags);
+
+	tsc200x_update_pen_state(ts, tsdata.x, tsdata.y, pressure);
+	mod_timer(&ts->penup_timer,
+		  jiffies + msecs_to_jiffies(TSC200X_PENUP_TIME_MS));
+
+	spin_unlock_irqrestore(&ts->lock, flags);
+
+	ts->last_valid_interrupt = jiffies;
+out:
+	return IRQ_HANDLED;
+}
+
+static void tsc200x_penup_timer(unsigned long data)
+{
+	struct tsc200x *ts = (struct tsc200x *)data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&ts->lock, flags);
+	tsc200x_update_pen_state(ts, 0, 0, 0);
+	spin_unlock_irqrestore(&ts->lock, flags);
+}
+
+static void tsc200x_start_scan(struct tsc200x *ts)
+{
+	regmap_write(ts->regmap, TSC200X_REG_CFR0, TSC200X_CFR0_INITVALUE);
+	regmap_write(ts->regmap, TSC200X_REG_CFR1, TSC200X_CFR1_INITVALUE);
+	regmap_write(ts->regmap, TSC200X_REG_CFR2, TSC200X_CFR2_INITVALUE);
+	ts->tsc200x_cmd(ts->dev, TSC200X_CMD_NORMAL);
+}
+
+static void tsc200x_stop_scan(struct tsc200x *ts)
+{
+	ts->tsc200x_cmd(ts->dev, TSC200X_CMD_STOP);
+}
+
+static void tsc200x_set_reset(struct tsc200x *ts, bool enable)
+{
+	if (ts->reset_gpio)
+		gpiod_set_value_cansleep(ts->reset_gpio, enable);
+	else if (ts->set_reset)
+		ts->set_reset(enable);
+}
+
+/* must be called with ts->mutex held */
+static void __tsc200x_disable(struct tsc200x *ts)
+{
+	tsc200x_stop_scan(ts);
+
+	disable_irq(ts->irq);
+	del_timer_sync(&ts->penup_timer);
+
+	cancel_delayed_work_sync(&ts->esd_work);
+
+	enable_irq(ts->irq);
+}
+
+/* must be called with ts->mutex held */
+static void __tsc200x_enable(struct tsc200x *ts)
+{
+	tsc200x_start_scan(ts);
+
+	if (ts->esd_timeout && (ts->set_reset || ts->reset_gpio)) {
+		ts->last_valid_interrupt = jiffies;
+		schedule_delayed_work(&ts->esd_work,
+				round_jiffies_relative(
+					msecs_to_jiffies(ts->esd_timeout)));
+	}
+}
+
+static ssize_t tsc200x_selftest_show(struct device *dev,
+				     struct device_attribute *attr,
+				     char *buf)
+{
+	struct tsc200x *ts = dev_get_drvdata(dev);
+	unsigned int temp_high;
+	unsigned int temp_high_orig;
+	unsigned int temp_high_test;
+	bool success = true;
+	int error;
+
+	mutex_lock(&ts->mutex);
+
+	/*
+	 * Test TSC200X communications via temp high register.
+	 */
+	__tsc200x_disable(ts);
+
+	error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high_orig);
+	if (error) {
+		dev_warn(dev, "selftest failed: read error %d\n", error);
+		success = false;
+		goto out;
+	}
+
+	temp_high_test = (temp_high_orig - 1) & MAX_12BIT;
+
+	error = regmap_write(ts->regmap, TSC200X_REG_TEMP_HIGH, temp_high_test);
+	if (error) {
+		dev_warn(dev, "selftest failed: write error %d\n", error);
+		success = false;
+		goto out;
+	}
+
+	error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high);
+	if (error) {
+		dev_warn(dev, "selftest failed: read error %d after write\n",
+			 error);
+		success = false;
+		goto out;
+	}
+
+	if (temp_high != temp_high_test) {
+		dev_warn(dev, "selftest failed: %d != %d\n",
+			 temp_high, temp_high_test);
+		success = false;
+	}
+
+	/* hardware reset */
+	tsc200x_set_reset(ts, false);
+	usleep_range(100, 500); /* only 10us required */
+	tsc200x_set_reset(ts, true);
+
+	if (!success)
+		goto out;
+
+	/* test that the reset really happened */
+	error = regmap_read(ts->regmap, TSC200X_REG_TEMP_HIGH, &temp_high);
+	if (error) {
+		dev_warn(dev, "selftest failed: read error %d after reset\n",
+			 error);
+		success = false;
+		goto out;
+	}
+
+	if (temp_high != temp_high_orig) {
+		dev_warn(dev, "selftest failed after reset: %d != %d\n",
+			 temp_high, temp_high_orig);
+		success = false;
+	}
+
+out:
+	__tsc200x_enable(ts);
+	mutex_unlock(&ts->mutex);
+
+	return sprintf(buf, "%d\n", success);
+}
+
+static DEVICE_ATTR(selftest, S_IRUGO, tsc200x_selftest_show, NULL);
+
+static struct attribute *tsc200x_attrs[] = {
+	&dev_attr_selftest.attr,
+	NULL
+};
+
+static umode_t tsc200x_attr_is_visible(struct kobject *kobj,
+				      struct attribute *attr, int n)
+{
+	struct device *dev = container_of(kobj, struct device, kobj);
+	struct tsc200x *ts = dev_get_drvdata(dev);
+	umode_t mode = attr->mode;
+
+	if (attr == &dev_attr_selftest.attr) {
+		if (!ts->set_reset && !ts->reset_gpio)
+			mode = 0;
+	}
+
+	return mode;
+}
+
+static const struct attribute_group tsc200x_attr_group = {
+	.is_visible	= tsc200x_attr_is_visible,
+	.attrs		= tsc200x_attrs,
+};
+
+static void tsc200x_esd_work(struct work_struct *work)
+{
+	struct tsc200x *ts = container_of(work, struct tsc200x, esd_work.work);
+	int error;
+	unsigned int r;
+
+	if (!mutex_trylock(&ts->mutex)) {
+		/*
+		 * If the mutex is taken, it means that disable or enable is in
+		 * progress. In that case just reschedule the work. If the work
+		 * is not needed, it will be canceled by disable.
+		 */
+		goto reschedule;
+	}
+
+	if (time_is_after_jiffies(ts->last_valid_interrupt +
+				  msecs_to_jiffies(ts->esd_timeout)))
+		goto out;
+
+	/* We should be able to read register without disabling interrupts. */
+	error = regmap_read(ts->regmap, TSC200X_REG_CFR0, &r);
+	if (!error &&
+	    !((r ^ TSC200X_CFR0_INITVALUE) & TSC200X_CFR0_RW_MASK)) {
+		goto out;
+	}
+
+	/*
+	 * If we could not read our known value from configuration register 0
+	 * then we should reset the controller as if from power-up and start
+	 * scanning again.
+	 */
+	dev_info(ts->dev, "TSC200X not responding - resetting\n");
+
+	disable_irq(ts->irq);
+	del_timer_sync(&ts->penup_timer);
+
+	tsc200x_update_pen_state(ts, 0, 0, 0);
+
+	tsc200x_set_reset(ts, false);
+	usleep_range(100, 500); /* only 10us required */
+	tsc200x_set_reset(ts, true);
+
+	enable_irq(ts->irq);
+	tsc200x_start_scan(ts);
+
+out:
+	mutex_unlock(&ts->mutex);
+reschedule:
+	/* re-arm the watchdog */
+	schedule_delayed_work(&ts->esd_work,
+			      round_jiffies_relative(
+					msecs_to_jiffies(ts->esd_timeout)));
+}
+
+static int tsc200x_open(struct input_dev *input)
+{
+	struct tsc200x *ts = input_get_drvdata(input);
+
+	mutex_lock(&ts->mutex);
+
+	if (!ts->suspended)
+		__tsc200x_enable(ts);
+
+	ts->opened = true;
+
+	mutex_unlock(&ts->mutex);
+
+	return 0;
+}
+
+static void tsc200x_close(struct input_dev *input)
+{
+	struct tsc200x *ts = input_get_drvdata(input);
+
+	mutex_lock(&ts->mutex);
+
+	if (!ts->suspended)
+		__tsc200x_disable(ts);
+
+	ts->opened = false;
+
+	mutex_unlock(&ts->mutex);
+}
+
+int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
+		  struct regmap *regmap,
+		  int (*tsc200x_cmd)(struct device *dev, u8 cmd))
+{
+	const struct tsc2005_platform_data *pdata = dev_get_platdata(dev);
+	struct device_node *np = dev->of_node;
+
+	struct tsc200x *ts;
+	struct input_dev *input_dev;
+	unsigned int max_x = MAX_12BIT;
+	unsigned int max_y = MAX_12BIT;
+	unsigned int max_p = MAX_12BIT;
+	unsigned int fudge_x = TSC200X_DEF_X_FUZZ;
+	unsigned int fudge_y = TSC200X_DEF_Y_FUZZ;
+	unsigned int fudge_p = TSC200X_DEF_P_FUZZ;
+	unsigned int x_plate_ohm = TSC200X_DEF_RESISTOR;
+	unsigned int esd_timeout;
+	int error;
+
+	if (!np && !pdata) {
+		dev_err(dev, "no platform data\n");
+		return -ENODEV;
+	}
+
+	if (irq <= 0) {
+		dev_err(dev, "no irq\n");
+		return -ENODEV;
+	}
+
+	if (IS_ERR(regmap))
+		return PTR_ERR(regmap);
+
+	if (!tsc200x_cmd) {
+		dev_err(dev, "no cmd function\n");
+		return -ENODEV;
+	}
+
+	if (pdata) {
+		fudge_x	= pdata->ts_x_fudge;
+		fudge_y	= pdata->ts_y_fudge;
+		fudge_p	= pdata->ts_pressure_fudge;
+		max_x	= pdata->ts_x_max;
+		max_y	= pdata->ts_y_max;
+		max_p	= pdata->ts_pressure_max;
+		x_plate_ohm = pdata->ts_x_plate_ohm;
+		esd_timeout = pdata->esd_timeout_ms;
+	} else {
+		x_plate_ohm = TSC200X_DEF_RESISTOR;
+		of_property_read_u32(np, "ti,x-plate-ohms", &x_plate_ohm);
+		esd_timeout = 0;
+		of_property_read_u32(np, "ti,esd-recovery-timeout-ms",
+								&esd_timeout);
+	}
+
+	ts = devm_kzalloc(dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	input_dev = devm_input_allocate_device(dev);
+	if (!input_dev)
+		return -ENOMEM;
+
+	ts->irq = irq;
+	ts->dev = dev;
+	ts->idev = input_dev;
+	ts->regmap = regmap;
+	ts->tsc200x_cmd = tsc200x_cmd;
+	ts->x_plate_ohm = x_plate_ohm;
+	ts->esd_timeout = esd_timeout;
+
+	ts->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ts->reset_gpio)) {
+		error = PTR_ERR(ts->reset_gpio);
+		dev_err(dev, "error acquiring reset gpio: %d\n", error);
+		return error;
+	}
+
+	ts->vio = devm_regulator_get_optional(dev, "vio");
+	if (IS_ERR(ts->vio)) {
+		error = PTR_ERR(ts->vio);
+		dev_err(dev, "vio regulator missing (%d)", error);
+		return error;
+	}
+
+	if (!ts->reset_gpio && pdata)
+		ts->set_reset = pdata->set_reset;
+
+	mutex_init(&ts->mutex);
+
+	spin_lock_init(&ts->lock);
+	setup_timer(&ts->penup_timer, tsc200x_penup_timer, (unsigned long)ts);
+
+	INIT_DELAYED_WORK(&ts->esd_work, tsc200x_esd_work);
+
+	snprintf(ts->phys, sizeof(ts->phys),
+		 "%s/input-ts", dev_name(dev));
+
+	if (tsc_id->product == 2004) {
+		input_dev->name = "TSC200X touchscreen";
+	} else {
+		input_dev->name = devm_kasprintf(dev, GFP_KERNEL,
+						 "TSC%04d touchscreen",
+						 tsc_id->product);
+		if (!input_dev->name)
+			return -ENOMEM;
+	}
+
+	input_dev->phys = ts->phys;
+	input_dev->id = *tsc_id;
+	input_dev->dev.parent = dev;
+	input_dev->evbit[0] = BIT(EV_ABS) | BIT(EV_KEY);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, max_x, fudge_x, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, max_y, fudge_y, 0);
+	input_set_abs_params(input_dev, ABS_PRESSURE, 0, max_p, fudge_p, 0);
+
+	if (np)
+		touchscreen_parse_properties(input_dev, false);
+
+	input_dev->open = tsc200x_open;
+	input_dev->close = tsc200x_close;
+
+	input_set_drvdata(input_dev, ts);
+
+	/* Ensure the touchscreen is off */
+	tsc200x_stop_scan(ts);
+
+	error = devm_request_threaded_irq(dev, irq, NULL,
+					  tsc200x_irq_thread,
+					  IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+					  "tsc200x", ts);
+	if (error) {
+		dev_err(dev, "Failed to request irq, err: %d\n", error);
+		return error;
+	}
+
+	/* enable regulator for DT */
+	if (ts->vio) {
+		error = regulator_enable(ts->vio);
+		if (error)
+			return error;
+	}
+
+	dev_set_drvdata(dev, ts);
+	error = sysfs_create_group(&dev->kobj, &tsc200x_attr_group);
+	if (error) {
+		dev_err(dev,
+			"Failed to create sysfs attributes, err: %d\n", error);
+		goto disable_regulator;
+	}
+
+	error = input_register_device(ts->idev);
+	if (error) {
+		dev_err(dev,
+			"Failed to register input device, err: %d\n", error);
+		goto err_remove_sysfs;
+	}
+
+	irq_set_irq_wake(irq, 1);
+	return 0;
+
+err_remove_sysfs:
+	sysfs_remove_group(&dev->kobj, &tsc200x_attr_group);
+disable_regulator:
+	if (ts->vio)
+		regulator_disable(ts->vio);
+	return error;
+}
+EXPORT_SYMBOL_GPL(tsc200x_probe);
+
+int tsc200x_remove(struct device *dev)
+{
+	struct tsc200x *ts = dev_get_drvdata(dev);
+
+	sysfs_remove_group(&dev->kobj, &tsc200x_attr_group);
+
+	if (ts->vio)
+		regulator_disable(ts->vio);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(tsc200x_remove);
+
+static int __maybe_unused tsc200x_suspend(struct device *dev)
+{
+	struct tsc200x *ts = dev_get_drvdata(dev);
+
+	mutex_lock(&ts->mutex);
+
+	if (!ts->suspended && ts->opened)
+		__tsc200x_disable(ts);
+
+	ts->suspended = true;
+
+	mutex_unlock(&ts->mutex);
+
+	return 0;
+}
+
+static int __maybe_unused tsc200x_resume(struct device *dev)
+{
+	struct tsc200x *ts = dev_get_drvdata(dev);
+
+	mutex_lock(&ts->mutex);
+
+	if (ts->suspended && ts->opened)
+		__tsc200x_enable(ts);
+
+	ts->suspended = false;
+
+	mutex_unlock(&ts->mutex);
+
+	return 0;
+}
+
+SIMPLE_DEV_PM_OPS(tsc200x_pm_ops, tsc200x_suspend, tsc200x_resume);
+EXPORT_SYMBOL_GPL(tsc200x_pm_ops);
+
+MODULE_AUTHOR("Lauri Leukkunen <lauri.leukkunen@nokia.com>");
+MODULE_DESCRIPTION("TSC200x Touchscreen Driver Core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/tsc200x-core.h b/drivers/input/touchscreen/tsc200x-core.h
new file mode 100644
index 0000000..49a63a3
--- /dev/null
+++ b/drivers/input/touchscreen/tsc200x-core.h
@@ -0,0 +1,78 @@
+#ifndef _TSC200X_CORE_H
+#define _TSC200X_CORE_H
+
+/* control byte 1 */
+#define TSC200X_CMD			0x80
+#define TSC200X_CMD_NORMAL		0x00
+#define TSC200X_CMD_STOP		0x01
+#define TSC200X_CMD_12BIT		0x04
+
+/* control byte 0 */
+#define TSC200X_REG_READ		0x01 /* R/W access */
+#define TSC200X_REG_PND0		0x02 /* Power Not Down Control */
+#define TSC200X_REG_X			(0x0 << 3)
+#define TSC200X_REG_Y			(0x1 << 3)
+#define TSC200X_REG_Z1			(0x2 << 3)
+#define TSC200X_REG_Z2			(0x3 << 3)
+#define TSC200X_REG_AUX			(0x4 << 3)
+#define TSC200X_REG_TEMP1		(0x5 << 3)
+#define TSC200X_REG_TEMP2		(0x6 << 3)
+#define TSC200X_REG_STATUS		(0x7 << 3)
+#define TSC200X_REG_AUX_HIGH		(0x8 << 3)
+#define TSC200X_REG_AUX_LOW		(0x9 << 3)
+#define TSC200X_REG_TEMP_HIGH		(0xA << 3)
+#define TSC200X_REG_TEMP_LOW		(0xB << 3)
+#define TSC200X_REG_CFR0		(0xC << 3)
+#define TSC200X_REG_CFR1		(0xD << 3)
+#define TSC200X_REG_CFR2		(0xE << 3)
+#define TSC200X_REG_CONV_FUNC		(0xF << 3)
+
+/* configuration register 0 */
+#define TSC200X_CFR0_PRECHARGE_276US	0x0040
+#define TSC200X_CFR0_STABTIME_1MS	0x0300
+#define TSC200X_CFR0_CLOCK_1MHZ		0x1000
+#define TSC200X_CFR0_RESOLUTION12	0x2000
+#define TSC200X_CFR0_PENMODE		0x8000
+#define TSC200X_CFR0_INITVALUE		(TSC200X_CFR0_STABTIME_1MS    | \
+					 TSC200X_CFR0_CLOCK_1MHZ      | \
+					 TSC200X_CFR0_RESOLUTION12    | \
+					 TSC200X_CFR0_PRECHARGE_276US | \
+					 TSC200X_CFR0_PENMODE)
+
+/* bits common to both read and write of configuration register 0 */
+#define	TSC200X_CFR0_RW_MASK		0x3fff
+
+/* configuration register 1 */
+#define TSC200X_CFR1_BATCHDELAY_4MS	0x0003
+#define TSC200X_CFR1_INITVALUE		TSC200X_CFR1_BATCHDELAY_4MS
+
+/* configuration register 2 */
+#define TSC200X_CFR2_MAVE_Z		0x0004
+#define TSC200X_CFR2_MAVE_Y		0x0008
+#define TSC200X_CFR2_MAVE_X		0x0010
+#define TSC200X_CFR2_AVG_7		0x0800
+#define TSC200X_CFR2_MEDIUM_15		0x3000
+#define TSC200X_CFR2_INITVALUE		(TSC200X_CFR2_MAVE_X	| \
+					 TSC200X_CFR2_MAVE_Y	| \
+					 TSC200X_CFR2_MAVE_Z	| \
+					 TSC200X_CFR2_MEDIUM_15	| \
+					 TSC200X_CFR2_AVG_7)
+
+#define MAX_12BIT			0xfff
+#define TSC200X_DEF_X_FUZZ		4
+#define TSC200X_DEF_Y_FUZZ		8
+#define TSC200X_DEF_P_FUZZ		2
+#define TSC200X_DEF_RESISTOR		280
+
+#define TSC2005_SPI_MAX_SPEED_HZ	10000000
+#define TSC200X_PENUP_TIME_MS		40
+
+extern const struct regmap_config tsc200x_regmap_config;
+extern const struct dev_pm_ops tsc200x_pm_ops;
+
+int tsc200x_probe(struct device *dev, int irq, const struct input_id *tsc_id,
+		  struct regmap *regmap,
+		  int (*tsc200x_cmd)(struct device *dev, u8 cmd));
+int tsc200x_remove(struct device *dev);
+
+#endif
diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c
new file mode 100644
index 0000000..2968787
--- /dev/null
+++ b/drivers/input/touchscreen/tsc40.c
@@ -0,0 +1,172 @@
+/*
+ * TSC-40 serial touchscreen driver. It should be compatible with
+ * TSC-10 and 25.
+ *
+ * Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
+ * License: GPLv2 as published by the FSF.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+
+#define PACKET_LENGTH  5
+struct tsc_ser {
+	struct input_dev *dev;
+	struct serio *serio;
+	u32 idx;
+	unsigned char data[PACKET_LENGTH];
+	char phys[32];
+};
+
+static void tsc_process_data(struct tsc_ser *ptsc)
+{
+	struct input_dev *dev = ptsc->dev;
+	u8 *data = ptsc->data;
+	u32 x;
+	u32 y;
+
+	x = ((data[1] & 0x03) << 8) | data[2];
+	y = ((data[3] & 0x03) << 8) | data[4];
+
+	input_report_abs(dev, ABS_X, x);
+	input_report_abs(dev, ABS_Y, y);
+	input_report_key(dev, BTN_TOUCH, 1);
+
+	input_sync(dev);
+}
+
+static irqreturn_t tsc_interrupt(struct serio *serio,
+		unsigned char data, unsigned int flags)
+{
+	struct tsc_ser *ptsc = serio_get_drvdata(serio);
+	struct input_dev *dev = ptsc->dev;
+
+	ptsc->data[ptsc->idx] = data;
+	switch (ptsc->idx++) {
+	case 0:
+		if (unlikely((data & 0x3e) != 0x10)) {
+			dev_dbg(&serio->dev,
+				"unsynchronized packet start (0x%02x)\n", data);
+			ptsc->idx = 0;
+		} else if (!(data & 0x01)) {
+			input_report_key(dev, BTN_TOUCH, 0);
+			input_sync(dev);
+			ptsc->idx = 0;
+		}
+		break;
+
+	case 1:
+	case 3:
+		if (unlikely(data & 0xfc)) {
+			dev_dbg(&serio->dev,
+				"unsynchronized data 0x%02x at offset %d\n",
+				data, ptsc->idx - 1);
+			ptsc->idx = 0;
+		}
+		break;
+
+	case 4:
+		tsc_process_data(ptsc);
+		ptsc->idx = 0;
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int tsc_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct tsc_ser *ptsc;
+	struct input_dev *input_dev;
+	int error;
+
+	ptsc = kzalloc(sizeof(struct tsc_ser), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!ptsc || !input_dev) {
+		error = -ENOMEM;
+		goto fail1;
+	}
+
+	ptsc->serio = serio;
+	ptsc->dev = input_dev;
+	snprintf(ptsc->phys, sizeof(ptsc->phys), "%s/input0", serio->phys);
+
+	input_dev->name = "TSC-10/25/40 Serial TouchScreen";
+	input_dev->phys = ptsc->phys;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = SERIO_TSC40;
+	input_dev->id.product = 40;
+	input_dev->id.version = 0x0001;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+	input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0);
+	input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0);
+
+	serio_set_drvdata(serio, ptsc);
+
+	error = serio_open(serio, drv);
+	if (error)
+		goto fail2;
+
+	error = input_register_device(ptsc->dev);
+	if (error)
+		goto fail3;
+
+	return 0;
+
+fail3:
+	serio_close(serio);
+fail2:
+	serio_set_drvdata(serio, NULL);
+fail1:
+	input_free_device(input_dev);
+	kfree(ptsc);
+	return error;
+}
+
+static void tsc_disconnect(struct serio *serio)
+{
+	struct tsc_ser *ptsc = serio_get_drvdata(serio);
+
+	serio_close(serio);
+
+	input_unregister_device(ptsc->dev);
+	kfree(ptsc);
+
+	serio_set_drvdata(serio, NULL);
+}
+
+static struct serio_device_id tsc_serio_ids[] = {
+	{
+		.type   = SERIO_RS232,
+		.proto  = SERIO_TSC40,
+		.id     = SERIO_ANY,
+		.extra  = SERIO_ANY,
+	},
+	{ 0 }
+};
+MODULE_DEVICE_TABLE(serio, tsc_serio_ids);
+
+#define DRIVER_DESC    "TSC-10/25/40 serial touchscreen driver"
+
+static struct serio_driver tsc_drv = {
+	.driver	= {
+		.name   = "tsc40",
+	},
+	.description    = DRIVER_DESC,
+	.id_table	= tsc_serio_ids,
+	.interrupt      = tsc_interrupt,
+	.connect	= tsc_connect,
+	.disconnect     = tsc_disconnect,
+};
+
+module_serio_driver(tsc_drv);
+
+MODULE_AUTHOR("Sebastian Andrzej Siewior <bigeasy@linutronix.de>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
new file mode 100644
index 0000000..c1e23cf
--- /dev/null
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -0,0 +1,463 @@
+/*
+ *  Philips UCB1400 touchscreen driver
+ *
+ *  Author:	Nicolas Pitre
+ *  Created:	September 25, 2006
+ *  Copyright:	MontaVista Software, Inc.
+ *
+ * Spliting done by: Marek Vasut <marek.vasut@gmail.com>
+ * If something doesn't work and it worked before spliting, e-mail me,
+ * dont bother Nicolas please ;-)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This code is heavily based on ucb1x00-*.c copyrighted by Russell King
+ * covering the UCB1100, UCB1200 and UCB1300..  Support for the UCB1400 has
+ * been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/wait.h>
+#include <linux/input.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/ucb1400.h>
+
+#define UCB1400_TS_POLL_PERIOD	10 /* ms */
+
+static bool adcsync;
+static int ts_delay = 55; /* us */
+static int ts_delay_pressure;	/* us */
+
+/* Switch to interrupt mode. */
+static void ucb1400_ts_mode_int(struct ucb1400_ts *ucb)
+{
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
+			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
+			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
+			UCB_TS_CR_MODE_INT);
+}
+
+/*
+ * Switch to pressure mode, and read pressure.  We don't need to wait
+ * here, since both plates are being driven.
+ */
+static unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
+{
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
+			UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
+			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
+			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+
+	udelay(ts_delay_pressure);
+
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
+}
+
+/*
+ * Switch to X position mode and measure Y plate.  We switch the plate
+ * configuration in pressure mode, then switch to position mode.  This
+ * gives a faster response time.  Even so, we need to wait about 55us
+ * for things to stabilise.
+ */
+static unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
+{
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
+			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
+			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
+			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
+
+	udelay(ts_delay);
+
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
+}
+
+/*
+ * Switch to Y position mode and measure X plate.  We switch the plate
+ * configuration in pressure mode, then switch to position mode.  This
+ * gives a faster response time.  Even so, we need to wait about 55us
+ * for things to stabilise.
+ */
+static int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
+{
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
+			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
+			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
+			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+			UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
+
+	udelay(ts_delay);
+
+	return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync);
+}
+
+/*
+ * Switch to X plate resistance mode.  Set MX to ground, PX to
+ * supply.  Measure current.
+ */
+static unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
+{
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
+			UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
+			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+	return ucb1400_adc_read(ucb->ac97, 0, adcsync);
+}
+
+/*
+ * Switch to Y plate resistance mode.  Set MY to ground, PY to
+ * supply.  Measure current.
+ */
+static unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
+{
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
+			UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
+			UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
+	return ucb1400_adc_read(ucb->ac97, 0, adcsync);
+}
+
+static int ucb1400_ts_pen_up(struct ucb1400_ts *ucb)
+{
+	unsigned short val = ucb1400_reg_read(ucb->ac97, UCB_TS_CR);
+
+	return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
+}
+
+static void ucb1400_ts_irq_enable(struct ucb1400_ts *ucb)
+{
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_TSPX);
+}
+
+static void ucb1400_ts_irq_disable(struct ucb1400_ts *ucb)
+{
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
+}
+
+static void ucb1400_ts_report_event(struct input_dev *idev, u16 pressure, u16 x, u16 y)
+{
+	input_report_abs(idev, ABS_X, x);
+	input_report_abs(idev, ABS_Y, y);
+	input_report_abs(idev, ABS_PRESSURE, pressure);
+	input_report_key(idev, BTN_TOUCH, 1);
+	input_sync(idev);
+}
+
+static void ucb1400_ts_event_release(struct input_dev *idev)
+{
+	input_report_abs(idev, ABS_PRESSURE, 0);
+	input_report_key(idev, BTN_TOUCH, 0);
+	input_sync(idev);
+}
+
+static void ucb1400_clear_pending_irq(struct ucb1400_ts *ucb)
+{
+	unsigned int isr;
+
+	isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
+
+	if (isr & UCB_IE_TSPX)
+		ucb1400_ts_irq_disable(ucb);
+	else
+		dev_dbg(&ucb->ts_idev->dev,
+			"ucb1400: unexpected IE_STATUS = %#x\n", isr);
+}
+
+/*
+ * A restriction with interrupts exists when using the ucb1400, as
+ * the codec read/write routines may sleep while waiting for codec
+ * access completion and uses semaphores for access control to the
+ * AC97 bus. Therefore the driver is forced to use threaded interrupt
+ * handler.
+ */
+static irqreturn_t ucb1400_irq(int irqnr, void *devid)
+{
+	struct ucb1400_ts *ucb = devid;
+	unsigned int x, y, p;
+	bool penup;
+
+	if (unlikely(irqnr != ucb->irq))
+		return IRQ_NONE;
+
+	ucb1400_clear_pending_irq(ucb);
+
+	/* Start with a small delay before checking pendown state */
+	msleep(UCB1400_TS_POLL_PERIOD);
+
+	while (!ucb->stopped && !(penup = ucb1400_ts_pen_up(ucb))) {
+
+		ucb1400_adc_enable(ucb->ac97);
+		x = ucb1400_ts_read_xpos(ucb);
+		y = ucb1400_ts_read_ypos(ucb);
+		p = ucb1400_ts_read_pressure(ucb);
+		ucb1400_adc_disable(ucb->ac97);
+
+		ucb1400_ts_report_event(ucb->ts_idev, p, x, y);
+
+		wait_event_timeout(ucb->ts_wait, ucb->stopped,
+				   msecs_to_jiffies(UCB1400_TS_POLL_PERIOD));
+	}
+
+	ucb1400_ts_event_release(ucb->ts_idev);
+
+	if (!ucb->stopped) {
+		/* Switch back to interrupt mode. */
+		ucb1400_ts_mode_int(ucb);
+		ucb1400_ts_irq_enable(ucb);
+	}
+
+	return IRQ_HANDLED;
+}
+
+static void ucb1400_ts_stop(struct ucb1400_ts *ucb)
+{
+	/* Signal IRQ thread to stop polling and disable the handler. */
+	ucb->stopped = true;
+	mb();
+	wake_up(&ucb->ts_wait);
+	disable_irq(ucb->irq);
+
+	ucb1400_ts_irq_disable(ucb);
+	ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
+}
+
+/* Must be called with ts->lock held */
+static void ucb1400_ts_start(struct ucb1400_ts *ucb)
+{
+	/* Tell IRQ thread that it may poll the device. */
+	ucb->stopped = false;
+	mb();
+
+	ucb1400_ts_mode_int(ucb);
+	ucb1400_ts_irq_enable(ucb);
+
+	enable_irq(ucb->irq);
+}
+
+static int ucb1400_ts_open(struct input_dev *idev)
+{
+	struct ucb1400_ts *ucb = input_get_drvdata(idev);
+
+	ucb1400_ts_start(ucb);
+
+	return 0;
+}
+
+static void ucb1400_ts_close(struct input_dev *idev)
+{
+	struct ucb1400_ts *ucb = input_get_drvdata(idev);
+
+	ucb1400_ts_stop(ucb);
+}
+
+#ifndef NO_IRQ
+#define NO_IRQ	0
+#endif
+
+/*
+ * Try to probe our interrupt, rather than relying on lots of
+ * hard-coded machine dependencies.
+ */
+static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb,
+					   struct platform_device *pdev)
+{
+	unsigned long mask, timeout;
+
+	mask = probe_irq_on();
+
+	/* Enable the ADC interrupt. */
+	ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
+
+	/* Cause an ADC interrupt. */
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA);
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
+
+	/* Wait for the conversion to complete. */
+	timeout = jiffies + HZ/2;
+	while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) &
+						UCB_ADC_DAT_VALID)) {
+		cpu_relax();
+		if (time_after(jiffies, timeout)) {
+			dev_err(&pdev->dev, "timed out in IRQ probe\n");
+			probe_irq_off(mask);
+			return -ENODEV;
+		}
+	}
+	ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0);
+
+	/* Disable and clear interrupt. */
+	ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
+	ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
+
+	/* Read triggered interrupt. */
+	ucb->irq = probe_irq_off(mask);
+	if (ucb->irq < 0 || ucb->irq == NO_IRQ)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int ucb1400_ts_probe(struct platform_device *pdev)
+{
+	struct ucb1400_ts *ucb = dev_get_platdata(&pdev->dev);
+	int error, x_res, y_res;
+	u16 fcsr;
+
+	ucb->ts_idev = input_allocate_device();
+	if (!ucb->ts_idev) {
+		error = -ENOMEM;
+		goto err;
+	}
+
+	/* Only in case the IRQ line wasn't supplied, try detecting it */
+	if (ucb->irq < 0) {
+		error = ucb1400_ts_detect_irq(ucb, pdev);
+		if (error) {
+			dev_err(&pdev->dev, "IRQ probe failed\n");
+			goto err_free_devs;
+		}
+	}
+	dev_dbg(&pdev->dev, "found IRQ %d\n", ucb->irq);
+
+	init_waitqueue_head(&ucb->ts_wait);
+
+	input_set_drvdata(ucb->ts_idev, ucb);
+
+	ucb->ts_idev->dev.parent	= &pdev->dev;
+	ucb->ts_idev->name		= "UCB1400 touchscreen interface";
+	ucb->ts_idev->id.vendor		= ucb1400_reg_read(ucb->ac97,
+						AC97_VENDOR_ID1);
+	ucb->ts_idev->id.product	= ucb->id;
+	ucb->ts_idev->open		= ucb1400_ts_open;
+	ucb->ts_idev->close		= ucb1400_ts_close;
+	ucb->ts_idev->evbit[0]		= BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
+	ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	/*
+	 * Enable ADC filter to prevent horrible jitter on Colibri.
+	 * This also further reduces jitter on boards where ADCSYNC
+	 * pin is connected.
+	 */
+	fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
+	ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
+
+	ucb1400_adc_enable(ucb->ac97);
+	x_res = ucb1400_ts_read_xres(ucb);
+	y_res = ucb1400_ts_read_yres(ucb);
+	ucb1400_adc_disable(ucb->ac97);
+	dev_dbg(&pdev->dev, "x/y = %d/%d\n", x_res, y_res);
+
+	input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
+	input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
+	input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
+
+	ucb1400_ts_stop(ucb);
+
+	error = request_threaded_irq(ucb->irq, NULL, ucb1400_irq,
+				     IRQF_TRIGGER_RISING | IRQF_ONESHOT,
+				     "UCB1400", ucb);
+	if (error) {
+		dev_err(&pdev->dev,
+			"unable to grab irq%d: %d\n", ucb->irq, error);
+		goto err_free_devs;
+	}
+
+	error = input_register_device(ucb->ts_idev);
+	if (error)
+		goto err_free_irq;
+
+	return 0;
+
+err_free_irq:
+	free_irq(ucb->irq, ucb);
+err_free_devs:
+	input_free_device(ucb->ts_idev);
+err:
+	return error;
+}
+
+static int ucb1400_ts_remove(struct platform_device *pdev)
+{
+	struct ucb1400_ts *ucb = dev_get_platdata(&pdev->dev);
+
+	free_irq(ucb->irq, ucb);
+	input_unregister_device(ucb->ts_idev);
+
+	return 0;
+}
+
+static int __maybe_unused ucb1400_ts_suspend(struct device *dev)
+{
+	struct ucb1400_ts *ucb = dev_get_platdata(dev);
+	struct input_dev *idev = ucb->ts_idev;
+
+	mutex_lock(&idev->mutex);
+
+	if (idev->users)
+		ucb1400_ts_start(ucb);
+
+	mutex_unlock(&idev->mutex);
+	return 0;
+}
+
+static int __maybe_unused ucb1400_ts_resume(struct device *dev)
+{
+	struct ucb1400_ts *ucb = dev_get_platdata(dev);
+	struct input_dev *idev = ucb->ts_idev;
+
+	mutex_lock(&idev->mutex);
+
+	if (idev->users)
+		ucb1400_ts_stop(ucb);
+
+	mutex_unlock(&idev->mutex);
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(ucb1400_ts_pm_ops,
+			 ucb1400_ts_suspend, ucb1400_ts_resume);
+
+static struct platform_driver ucb1400_ts_driver = {
+	.probe	= ucb1400_ts_probe,
+	.remove	= ucb1400_ts_remove,
+	.driver	= {
+		.name	= "ucb1400_ts",
+		.pm	= &ucb1400_ts_pm_ops,
+	},
+};
+module_platform_driver(ucb1400_ts_driver);
+
+module_param(adcsync, bool, 0444);
+MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
+
+module_param(ts_delay, int, 0444);
+MODULE_PARM_DESC(ts_delay, "Delay between panel setup and"
+			    " position read. Default = 55us.");
+
+module_param(ts_delay_pressure, int, 0444);
+MODULE_PARM_DESC(ts_delay_pressure,
+		"delay between panel setup and pressure read."
+		"  Default = 0us.");
+
+MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c
new file mode 100644
index 0000000..2c41107
--- /dev/null
+++ b/drivers/input/touchscreen/usbtouchscreen.c
@@ -0,0 +1,1772 @@
+/******************************************************************************
+ * usbtouchscreen.c
+ * Driver for USB Touchscreens, supporting those devices:
+ *  - eGalax Touchkit
+ *    includes eTurboTouch CT-410/510/700
+ *  - 3M/Microtouch  EX II series
+ *  - ITM
+ *  - PanJit TouchSet
+ *  - eTurboTouch
+ *  - Gunze AHL61
+ *  - DMC TSC-10/25
+ *  - IRTOUCHSYSTEMS/UNITOP
+ *  - IdealTEK URTC1000
+ *  - General Touch
+ *  - GoTop Super_Q2/GogoPen/PenPower tablets
+ *  - JASTEC USB touch controller/DigiTech DTR-02U
+ *  - Zytronic capacitive touchscreen
+ *  - NEXIO/iNexio
+ *  - Elo TouchSystems 2700 IntelliTouch
+ *  - EasyTouch USB Dual/Multi touch controller from Data Modul
+ *
+ * Copyright (C) 2004-2007 by Daniel Ritz <daniel.ritz@gmx.ch>
+ * Copyright (C) by Todd E. Johnson (mtouchusb.c)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ * Driver is based on touchkitusb.c
+ * - ITM parts are from itmtouch.c
+ * - 3M parts are from mtouchusb.c
+ * - PanJit parts are from an unmerged driver by Lanslott Gish
+ * - DMC TSC 10/25 are from Holger Schurig, with ideas from an unmerged
+ *   driver from Marius Vollmer
+ *
+ *****************************************************************************/
+
+//#define DEBUG
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/usb.h>
+#include <linux/usb/input.h>
+#include <linux/hid.h>
+
+
+#define DRIVER_VERSION		"v0.6"
+#define DRIVER_AUTHOR		"Daniel Ritz <daniel.ritz@gmx.ch>"
+#define DRIVER_DESC		"USB Touchscreen Driver"
+
+static bool swap_xy;
+module_param(swap_xy, bool, 0644);
+MODULE_PARM_DESC(swap_xy, "If set X and Y axes are swapped.");
+
+static bool hwcalib_xy;
+module_param(hwcalib_xy, bool, 0644);
+MODULE_PARM_DESC(hwcalib_xy, "If set hw-calibrated X/Y are used if available");
+
+/* device specifc data/functions */
+struct usbtouch_usb;
+struct usbtouch_device_info {
+	int min_xc, max_xc;
+	int min_yc, max_yc;
+	int min_press, max_press;
+	int rept_size;
+
+	/*
+	 * Always service the USB devices irq not just when the input device is
+	 * open. This is useful when devices have a watchdog which prevents us
+	 * from periodically polling the device. Leave this unset unless your
+	 * touchscreen device requires it, as it does consume more of the USB
+	 * bandwidth.
+	 */
+	bool irq_always;
+
+	void (*process_pkt) (struct usbtouch_usb *usbtouch, unsigned char *pkt, int len);
+
+	/*
+	 * used to get the packet len. possible return values:
+	 * > 0: packet len
+	 * = 0: skip one byte
+	 * < 0: -return value more bytes needed
+	 */
+	int  (*get_pkt_len) (unsigned char *pkt, int len);
+
+	int  (*read_data)   (struct usbtouch_usb *usbtouch, unsigned char *pkt);
+	int  (*alloc)       (struct usbtouch_usb *usbtouch);
+	int  (*init)        (struct usbtouch_usb *usbtouch);
+	void (*exit)	    (struct usbtouch_usb *usbtouch);
+};
+
+/* a usbtouch device */
+struct usbtouch_usb {
+	unsigned char *data;
+	dma_addr_t data_dma;
+	int data_size;
+	unsigned char *buffer;
+	int buf_len;
+	struct urb *irq;
+	struct usb_interface *interface;
+	struct input_dev *input;
+	struct usbtouch_device_info *type;
+	char name[128];
+	char phys[64];
+	void *priv;
+
+	int x, y;
+	int touch, press;
+};
+
+
+/* device types */
+enum {
+	DEVTYPE_IGNORE = -1,
+	DEVTYPE_EGALAX,
+	DEVTYPE_PANJIT,
+	DEVTYPE_3M,
+	DEVTYPE_ITM,
+	DEVTYPE_ETURBO,
+	DEVTYPE_GUNZE,
+	DEVTYPE_DMC_TSC10,
+	DEVTYPE_IRTOUCH,
+	DEVTYPE_IRTOUCH_HIRES,
+	DEVTYPE_IDEALTEK,
+	DEVTYPE_GENERAL_TOUCH,
+	DEVTYPE_GOTOP,
+	DEVTYPE_JASTEC,
+	DEVTYPE_E2I,
+	DEVTYPE_ZYTRONIC,
+	DEVTYPE_TC45USB,
+	DEVTYPE_NEXIO,
+	DEVTYPE_ELO,
+	DEVTYPE_ETOUCH,
+};
+
+#define USB_DEVICE_HID_CLASS(vend, prod) \
+	.match_flags = USB_DEVICE_ID_MATCH_INT_CLASS \
+		| USB_DEVICE_ID_MATCH_DEVICE, \
+	.idVendor = (vend), \
+	.idProduct = (prod), \
+	.bInterfaceClass = USB_INTERFACE_CLASS_HID
+
+static const struct usb_device_id usbtouch_devices[] = {
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
+	/* ignore the HID capable devices, handled by usbhid */
+	{USB_DEVICE_HID_CLASS(0x0eef, 0x0001), .driver_info = DEVTYPE_IGNORE},
+	{USB_DEVICE_HID_CLASS(0x0eef, 0x0002), .driver_info = DEVTYPE_IGNORE},
+
+	/* normal device IDs */
+	{USB_DEVICE(0x3823, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x3823, 0x0002), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0123, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0eef, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x0eef, 0x0002), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x1234, 0x0001), .driver_info = DEVTYPE_EGALAX},
+	{USB_DEVICE(0x1234, 0x0002), .driver_info = DEVTYPE_EGALAX},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
+	{USB_DEVICE(0x134c, 0x0001), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0002), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0003), .driver_info = DEVTYPE_PANJIT},
+	{USB_DEVICE(0x134c, 0x0004), .driver_info = DEVTYPE_PANJIT},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
+	{USB_DEVICE(0x0596, 0x0001), .driver_info = DEVTYPE_3M},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
+	{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+	{USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
+	{USB_DEVICE(0x1234, 0x5678), .driver_info = DEVTYPE_ETURBO},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
+	{USB_DEVICE(0x0637, 0x0001), .driver_info = DEVTYPE_GUNZE},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
+	{USB_DEVICE(0x0afa, 0x03e8), .driver_info = DEVTYPE_DMC_TSC10},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+	{USB_DEVICE(0x595a, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
+	{USB_DEVICE(0x6615, 0x0001), .driver_info = DEVTYPE_IRTOUCH},
+	{USB_DEVICE(0x6615, 0x0012), .driver_info = DEVTYPE_IRTOUCH_HIRES},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
+	{USB_DEVICE(0x1391, 0x1000), .driver_info = DEVTYPE_IDEALTEK},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
+	{USB_DEVICE(0x0dfc, 0x0001), .driver_info = DEVTYPE_GENERAL_TOUCH},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
+	{USB_DEVICE(0x08f2, 0x007f), .driver_info = DEVTYPE_GOTOP},
+	{USB_DEVICE(0x08f2, 0x00ce), .driver_info = DEVTYPE_GOTOP},
+	{USB_DEVICE(0x08f2, 0x00f4), .driver_info = DEVTYPE_GOTOP},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
+	{USB_DEVICE(0x0f92, 0x0001), .driver_info = DEVTYPE_JASTEC},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_E2I
+	{USB_DEVICE(0x1ac7, 0x0001), .driver_info = DEVTYPE_E2I},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+	{USB_DEVICE(0x14c8, 0x0003), .driver_info = DEVTYPE_ZYTRONIC},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
+	/* TC5UH */
+	{USB_DEVICE(0x0664, 0x0309), .driver_info = DEVTYPE_TC45USB},
+	/* TC4UM */
+	{USB_DEVICE(0x0664, 0x0306), .driver_info = DEVTYPE_TC45USB},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+	/* data interface only */
+	{USB_DEVICE_AND_INTERFACE_INFO(0x10f0, 0x2002, 0x0a, 0x00, 0x00),
+		.driver_info = DEVTYPE_NEXIO},
+	{USB_DEVICE_AND_INTERFACE_INFO(0x1870, 0x0001, 0x0a, 0x00, 0x00),
+		.driver_info = DEVTYPE_NEXIO},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ELO
+	{USB_DEVICE(0x04e7, 0x0020), .driver_info = DEVTYPE_ELO},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+	{USB_DEVICE(0x7374, 0x0001), .driver_info = DEVTYPE_ETOUCH},
+#endif
+
+	{}
+};
+
+
+/*****************************************************************************
+ * e2i Part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_E2I
+static int e2i_init(struct usbtouch_usb *usbtouch)
+{
+	int ret;
+	struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+	                      0x01, 0x02, 0x0000, 0x0081,
+	                      NULL, 0, USB_CTRL_SET_TIMEOUT);
+
+	dev_dbg(&usbtouch->interface->dev,
+		"%s - usb_control_msg - E2I_RESET - bytes|err: %d\n",
+		__func__, ret);
+	return ret;
+}
+
+static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	int tmp = (pkt[0] << 8) | pkt[1];
+	dev->x  = (pkt[2] << 8) | pkt[3];
+	dev->y  = (pkt[4] << 8) | pkt[5];
+
+	tmp = tmp - 0xA000;
+	dev->touch = (tmp > 0);
+	dev->press = (tmp > 0 ? tmp : 0);
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * eGalax part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
+
+#ifndef MULTI_PACKET
+#define MULTI_PACKET
+#endif
+
+#define EGALAX_PKT_TYPE_MASK		0xFE
+#define EGALAX_PKT_TYPE_REPT		0x80
+#define EGALAX_PKT_TYPE_DIAG		0x0A
+
+static int egalax_init(struct usbtouch_usb *usbtouch)
+{
+	int ret, i;
+	unsigned char *buf;
+	struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
+
+	/*
+	 * An eGalax diagnostic packet kicks the device into using the right
+	 * protocol.  We send a "check active" packet.  The response will be
+	 * read later and ignored.
+	 */
+
+	buf = kmalloc(3, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+
+	buf[0] = EGALAX_PKT_TYPE_DIAG;
+	buf[1] = 1;	/* length */
+	buf[2] = 'A';	/* command - check active */
+
+	for (i = 0; i < 3; i++) {
+		ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0),
+				      0,
+				      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				      0, 0, buf, 3,
+				      USB_CTRL_SET_TIMEOUT);
+		if (ret >= 0) {
+			ret = 0;
+			break;
+		}
+		if (ret != -EPIPE)
+			break;
+	}
+
+	kfree(buf);
+
+	return ret;
+}
+
+static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT)
+		return 0;
+
+	dev->x = ((pkt[3] & 0x0F) << 7) | (pkt[4] & 0x7F);
+	dev->y = ((pkt[1] & 0x0F) << 7) | (pkt[2] & 0x7F);
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+
+static int egalax_get_pkt_len(unsigned char *buf, int len)
+{
+	switch (buf[0] & EGALAX_PKT_TYPE_MASK) {
+	case EGALAX_PKT_TYPE_REPT:
+		return 5;
+
+	case EGALAX_PKT_TYPE_DIAG:
+		if (len < 2)
+			return -1;
+
+		return buf[1] + 2;
+	}
+
+	return 0;
+}
+#endif
+
+/*****************************************************************************
+ * EasyTouch part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+
+#ifndef MULTI_PACKET
+#define MULTI_PACKET
+#endif
+
+#define ETOUCH_PKT_TYPE_MASK		0xFE
+#define ETOUCH_PKT_TYPE_REPT		0x80
+#define ETOUCH_PKT_TYPE_REPT2		0xB0
+#define ETOUCH_PKT_TYPE_DIAG		0x0A
+
+static int etouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	if ((pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT &&
+		(pkt[0] & ETOUCH_PKT_TYPE_MASK) != ETOUCH_PKT_TYPE_REPT2)
+		return 0;
+
+	dev->x = ((pkt[1] & 0x1F) << 7) | (pkt[2] & 0x7F);
+	dev->y = ((pkt[3] & 0x1F) << 7) | (pkt[4] & 0x7F);
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+
+static int etouch_get_pkt_len(unsigned char *buf, int len)
+{
+	switch (buf[0] & ETOUCH_PKT_TYPE_MASK) {
+	case ETOUCH_PKT_TYPE_REPT:
+	case ETOUCH_PKT_TYPE_REPT2:
+		return 5;
+
+	case ETOUCH_PKT_TYPE_DIAG:
+		if (len < 2)
+			return -1;
+
+		return buf[1] + 2;
+	}
+
+	return 0;
+}
+#endif
+
+/*****************************************************************************
+ * PanJit Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
+static int panjit_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+	dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * 3M/Microtouch Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
+
+#define MTOUCHUSB_ASYNC_REPORT          1
+#define MTOUCHUSB_RESET                 7
+#define MTOUCHUSB_REQ_CTRLLR_ID         10
+
+static int mtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	if (hwcalib_xy) {
+		dev->x = (pkt[4] << 8) | pkt[3];
+		dev->y = 0xffff - ((pkt[6] << 8) | pkt[5]);
+	} else {
+		dev->x = (pkt[8] << 8) | pkt[7];
+		dev->y = (pkt[10] << 8) | pkt[9];
+	}
+	dev->touch = (pkt[2] & 0x40) ? 1 : 0;
+
+	return 1;
+}
+
+static int mtouch_init(struct usbtouch_usb *usbtouch)
+{
+	int ret, i;
+	struct usb_device *udev = interface_to_usbdev(usbtouch->interface);
+
+	ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+	                      MTOUCHUSB_RESET,
+	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      1, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+	dev_dbg(&usbtouch->interface->dev,
+		"%s - usb_control_msg - MTOUCHUSB_RESET - bytes|err: %d\n",
+		__func__, ret);
+	if (ret < 0)
+		return ret;
+	msleep(150);
+
+	for (i = 0; i < 3; i++) {
+		ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
+				      MTOUCHUSB_ASYNC_REPORT,
+				      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+				      1, 1, NULL, 0, USB_CTRL_SET_TIMEOUT);
+		dev_dbg(&usbtouch->interface->dev,
+			"%s - usb_control_msg - MTOUCHUSB_ASYNC_REPORT - bytes|err: %d\n",
+			__func__, ret);
+		if (ret >= 0)
+			break;
+		if (ret != -EPIPE)
+			return ret;
+	}
+
+	/* Default min/max xy are the raw values, override if using hw-calib */
+	if (hwcalib_xy) {
+		input_set_abs_params(usbtouch->input, ABS_X, 0, 0xffff, 0, 0);
+		input_set_abs_params(usbtouch->input, ABS_Y, 0, 0xffff, 0, 0);
+	}
+
+	return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * ITM Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
+static int itm_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	int touch;
+	/*
+	 * ITM devices report invalid x/y data if not touched.
+	 * if the screen was touched before but is not touched any more
+	 * report touch as 0 with the last valid x/y data once. then stop
+	 * reporting data until touched again.
+	 */
+	dev->press = ((pkt[2] & 0x01) << 7) | (pkt[5] & 0x7F);
+
+	touch = ~pkt[7] & 0x20;
+	if (!touch) {
+		if (dev->touch) {
+			dev->touch = 0;
+			return 1;
+		}
+
+		return 0;
+	}
+
+	dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[3] & 0x7F);
+	dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[4] & 0x7F);
+	dev->touch = touch;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * eTurboTouch part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
+#ifndef MULTI_PACKET
+#define MULTI_PACKET
+#endif
+static int eturbo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	unsigned int shift;
+
+	/* packets should start with sync */
+	if (!(pkt[0] & 0x80))
+		return 0;
+
+	shift = (6 - (pkt[0] & 0x03));
+	dev->x = ((pkt[3] << 7) | pkt[4]) >> shift;
+	dev->y = ((pkt[1] << 7) | pkt[2]) >> shift;
+	dev->touch = (pkt[0] & 0x10) ? 1 : 0;
+
+	return 1;
+}
+
+static int eturbo_get_pkt_len(unsigned char *buf, int len)
+{
+	if (buf[0] & 0x80)
+		return 5;
+	if (buf[0] == 0x01)
+		return 3;
+	return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * Gunze part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
+static int gunze_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	if (!(pkt[0] & 0x80) || ((pkt[1] | pkt[2] | pkt[3]) & 0x80))
+		return 0;
+
+	dev->x = ((pkt[0] & 0x1F) << 7) | (pkt[2] & 0x7F);
+	dev->y = ((pkt[1] & 0x1F) << 7) | (pkt[3] & 0x7F);
+	dev->touch = pkt[0] & 0x20;
+
+	return 1;
+}
+#endif
+
+/*****************************************************************************
+ * DMC TSC-10/25 Part
+ *
+ * Documentation about the controller and it's protocol can be found at
+ *   http://www.dmccoltd.com/files/controler/tsc10usb_pi_e.pdf
+ *   http://www.dmccoltd.com/files/controler/tsc25_usb_e.pdf
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
+
+/* supported data rates. currently using 130 */
+#define TSC10_RATE_POINT	0x50
+#define TSC10_RATE_30		0x40
+#define TSC10_RATE_50		0x41
+#define TSC10_RATE_80		0x42
+#define TSC10_RATE_100		0x43
+#define TSC10_RATE_130		0x44
+#define TSC10_RATE_150		0x45
+
+/* commands */
+#define TSC10_CMD_RESET		0x55
+#define TSC10_CMD_RATE		0x05
+#define TSC10_CMD_DATA1		0x01
+
+static int dmc_tsc10_init(struct usbtouch_usb *usbtouch)
+{
+	struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
+	int ret = -ENOMEM;
+	unsigned char *buf;
+
+	buf = kmalloc(2, GFP_NOIO);
+	if (!buf)
+		goto err_nobuf;
+	/* reset */
+	buf[0] = buf[1] = 0xFF;
+	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+	                      TSC10_CMD_RESET,
+	                      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      0, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0)
+		goto err_out;
+	if (buf[0] != 0x06) {
+		ret = -ENODEV;
+		goto err_out;
+	}
+
+	/* TSC-25 data sheet specifies a delay after the RESET command */
+	msleep(150);
+
+	/* set coordinate output rate */
+	buf[0] = buf[1] = 0xFF;
+	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+	                      TSC10_CMD_RATE,
+	                      USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      TSC10_RATE_150, 0, buf, 2, USB_CTRL_SET_TIMEOUT);
+	if (ret < 0)
+		goto err_out;
+	if ((buf[0] != 0x06) && (buf[0] != 0x15 || buf[1] != 0x01)) {
+		ret = -ENODEV;
+		goto err_out;
+	}
+
+	/* start sending data */
+	ret = usb_control_msg(dev, usb_rcvctrlpipe (dev, 0),
+	                      TSC10_CMD_DATA1,
+	                      USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE,
+	                      0, 0, NULL, 0, USB_CTRL_SET_TIMEOUT);
+err_out:
+	kfree(buf);
+err_nobuf:
+	return ret;
+}
+
+
+static int dmc_tsc10_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = ((pkt[2] & 0x03) << 8) | pkt[1];
+	dev->y = ((pkt[4] & 0x03) << 8) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * IRTOUCH Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+static int irtouch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = (pkt[3] << 8) | pkt[2];
+	dev->y = (pkt[5] << 8) | pkt[4];
+	dev->touch = (pkt[1] & 0x03) ? 1 : 0;
+
+	return 1;
+}
+#endif
+
+/*****************************************************************************
+ * ET&T TC5UH/TC4UM part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
+static int tc45usb_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = ((pkt[2] & 0x0F) << 8) | pkt[1];
+	dev->y = ((pkt[4] & 0x0F) << 8) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+#endif
+
+/*****************************************************************************
+ * IdealTEK URTC1000 Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
+#ifndef MULTI_PACKET
+#define MULTI_PACKET
+#endif
+static int idealtek_get_pkt_len(unsigned char *buf, int len)
+{
+	if (buf[0] & 0x80)
+		return 5;
+	if (buf[0] == 0x01)
+		return len;
+	return 0;
+}
+
+static int idealtek_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	switch (pkt[0] & 0x98) {
+	case 0x88:
+		/* touch data in IdealTEK mode */
+		dev->x = (pkt[1] << 5) | (pkt[2] >> 2);
+		dev->y = (pkt[3] << 5) | (pkt[4] >> 2);
+		dev->touch = (pkt[0] & 0x40) ? 1 : 0;
+		return 1;
+
+	case 0x98:
+		/* touch data in MT emulation mode */
+		dev->x = (pkt[2] << 5) | (pkt[1] >> 2);
+		dev->y = (pkt[4] << 5) | (pkt[3] >> 2);
+		dev->touch = (pkt[0] & 0x40) ? 1 : 0;
+		return 1;
+
+	default:
+		return 0;
+	}
+}
+#endif
+
+/*****************************************************************************
+ * General Touch Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
+static int general_touch_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = (pkt[2] << 8) | pkt[1];
+	dev->y = (pkt[4] << 8) | pkt[3];
+	dev->press = pkt[5] & 0xff;
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+#endif
+
+/*****************************************************************************
+ * GoTop Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
+static int gotop_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = ((pkt[1] & 0x38) << 4) | pkt[2];
+	dev->y = ((pkt[1] & 0x07) << 7) | pkt[3];
+	dev->touch = pkt[0] & 0x01;
+
+	return 1;
+}
+#endif
+
+/*****************************************************************************
+ * JASTEC Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
+static int jastec_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = ((pkt[0] & 0x3f) << 6) | (pkt[2] & 0x3f);
+	dev->y = ((pkt[1] & 0x3f) << 6) | (pkt[3] & 0x3f);
+	dev->touch = (pkt[0] & 0x40) >> 6;
+
+	return 1;
+}
+#endif
+
+/*****************************************************************************
+ * Zytronic Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+static int zytronic_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	struct usb_interface *intf = dev->interface;
+
+	switch (pkt[0]) {
+	case 0x3A: /* command response */
+		dev_dbg(&intf->dev, "%s: Command response %d\n", __func__, pkt[1]);
+		break;
+
+	case 0xC0: /* down */
+		dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
+		dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
+		dev->touch = 1;
+		dev_dbg(&intf->dev, "%s: down %d,%d\n", __func__, dev->x, dev->y);
+		return 1;
+
+	case 0x80: /* up */
+		dev->x = (pkt[1] & 0x7f) | ((pkt[2] & 0x07) << 7);
+		dev->y = (pkt[3] & 0x7f) | ((pkt[4] & 0x07) << 7);
+		dev->touch = 0;
+		dev_dbg(&intf->dev, "%s: up %d,%d\n", __func__, dev->x, dev->y);
+		return 1;
+
+	default:
+		dev_dbg(&intf->dev, "%s: Unknown return %d\n", __func__, pkt[0]);
+		break;
+	}
+
+	return 0;
+}
+#endif
+
+/*****************************************************************************
+ * NEXIO Part
+ */
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+
+#define NEXIO_TIMEOUT	5000
+#define NEXIO_BUFSIZE	1024
+#define NEXIO_THRESHOLD	50
+
+struct nexio_priv {
+	struct urb *ack;
+	unsigned char *ack_buf;
+};
+
+struct nexio_touch_packet {
+	u8	flags;		/* 0xe1 = touch, 0xe1 = release */
+	__be16	data_len;	/* total bytes of touch data */
+	__be16	x_len;		/* bytes for X axis */
+	__be16	y_len;		/* bytes for Y axis */
+	u8	data[];
+} __attribute__ ((packed));
+
+static unsigned char nexio_ack_pkt[2] = { 0xaa, 0x02 };
+static unsigned char nexio_init_pkt[4] = { 0x82, 0x04, 0x0a, 0x0f };
+
+static void nexio_ack_complete(struct urb *urb)
+{
+}
+
+static int nexio_alloc(struct usbtouch_usb *usbtouch)
+{
+	struct nexio_priv *priv;
+	int ret = -ENOMEM;
+
+	usbtouch->priv = kmalloc(sizeof(struct nexio_priv), GFP_KERNEL);
+	if (!usbtouch->priv)
+		goto out_buf;
+
+	priv = usbtouch->priv;
+
+	priv->ack_buf = kmemdup(nexio_ack_pkt, sizeof(nexio_ack_pkt),
+				GFP_KERNEL);
+	if (!priv->ack_buf)
+		goto err_priv;
+
+	priv->ack = usb_alloc_urb(0, GFP_KERNEL);
+	if (!priv->ack) {
+		dev_dbg(&usbtouch->interface->dev,
+			"%s - usb_alloc_urb failed: usbtouch->ack\n", __func__);
+		goto err_ack_buf;
+	}
+
+	return 0;
+
+err_ack_buf:
+	kfree(priv->ack_buf);
+err_priv:
+	kfree(priv);
+out_buf:
+	return ret;
+}
+
+static int nexio_init(struct usbtouch_usb *usbtouch)
+{
+	struct usb_device *dev = interface_to_usbdev(usbtouch->interface);
+	struct usb_host_interface *interface = usbtouch->interface->cur_altsetting;
+	struct nexio_priv *priv = usbtouch->priv;
+	int ret = -ENOMEM;
+	int actual_len, i;
+	unsigned char *buf;
+	char *firmware_ver = NULL, *device_name = NULL;
+	int input_ep = 0, output_ep = 0;
+
+	/* find first input and output endpoint */
+	for (i = 0; i < interface->desc.bNumEndpoints; i++) {
+		if (!input_ep &&
+		    usb_endpoint_dir_in(&interface->endpoint[i].desc))
+			input_ep = interface->endpoint[i].desc.bEndpointAddress;
+		if (!output_ep &&
+		    usb_endpoint_dir_out(&interface->endpoint[i].desc))
+			output_ep = interface->endpoint[i].desc.bEndpointAddress;
+	}
+	if (!input_ep || !output_ep)
+		return -ENXIO;
+
+	buf = kmalloc(NEXIO_BUFSIZE, GFP_NOIO);
+	if (!buf)
+		goto out_buf;
+
+	/* two empty reads */
+	for (i = 0; i < 2; i++) {
+		ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+				   buf, NEXIO_BUFSIZE, &actual_len,
+				   NEXIO_TIMEOUT);
+		if (ret < 0)
+			goto out_buf;
+	}
+
+	/* send init command */
+	memcpy(buf, nexio_init_pkt, sizeof(nexio_init_pkt));
+	ret = usb_bulk_msg(dev, usb_sndbulkpipe(dev, output_ep),
+			   buf, sizeof(nexio_init_pkt), &actual_len,
+			   NEXIO_TIMEOUT);
+	if (ret < 0)
+		goto out_buf;
+
+	/* read replies */
+	for (i = 0; i < 3; i++) {
+		memset(buf, 0, NEXIO_BUFSIZE);
+		ret = usb_bulk_msg(dev, usb_rcvbulkpipe(dev, input_ep),
+				   buf, NEXIO_BUFSIZE, &actual_len,
+				   NEXIO_TIMEOUT);
+		if (ret < 0 || actual_len < 1 || buf[1] != actual_len)
+			continue;
+		switch (buf[0]) {
+		case 0x83:	/* firmware version */
+			if (!firmware_ver)
+				firmware_ver = kstrdup(&buf[2], GFP_NOIO);
+			break;
+		case 0x84:	/* device name */
+			if (!device_name)
+				device_name = kstrdup(&buf[2], GFP_NOIO);
+			break;
+		}
+	}
+
+	printk(KERN_INFO "Nexio device: %s, firmware version: %s\n",
+	       device_name, firmware_ver);
+
+	kfree(firmware_ver);
+	kfree(device_name);
+
+	usb_fill_bulk_urb(priv->ack, dev, usb_sndbulkpipe(dev, output_ep),
+			  priv->ack_buf, sizeof(nexio_ack_pkt),
+			  nexio_ack_complete, usbtouch);
+	ret = 0;
+
+out_buf:
+	kfree(buf);
+	return ret;
+}
+
+static void nexio_exit(struct usbtouch_usb *usbtouch)
+{
+	struct nexio_priv *priv = usbtouch->priv;
+
+	usb_kill_urb(priv->ack);
+	usb_free_urb(priv->ack);
+	kfree(priv->ack_buf);
+	kfree(priv);
+}
+
+static int nexio_read_data(struct usbtouch_usb *usbtouch, unsigned char *pkt)
+{
+	struct nexio_touch_packet *packet = (void *) pkt;
+	struct nexio_priv *priv = usbtouch->priv;
+	unsigned int data_len = be16_to_cpu(packet->data_len);
+	unsigned int x_len = be16_to_cpu(packet->x_len);
+	unsigned int y_len = be16_to_cpu(packet->y_len);
+	int x, y, begin_x, begin_y, end_x, end_y, w, h, ret;
+
+	/* got touch data? */
+	if ((pkt[0] & 0xe0) != 0xe0)
+		return 0;
+
+	if (data_len > 0xff)
+		data_len -= 0x100;
+	if (x_len > 0xff)
+		x_len -= 0x80;
+
+	/* send ACK */
+	ret = usb_submit_urb(priv->ack, GFP_ATOMIC);
+
+	if (!usbtouch->type->max_xc) {
+		usbtouch->type->max_xc = 2 * x_len;
+		input_set_abs_params(usbtouch->input, ABS_X,
+				     0, usbtouch->type->max_xc, 0, 0);
+		usbtouch->type->max_yc = 2 * y_len;
+		input_set_abs_params(usbtouch->input, ABS_Y,
+				     0, usbtouch->type->max_yc, 0, 0);
+	}
+	/*
+	 * The device reports state of IR sensors on X and Y axes.
+	 * Each byte represents "darkness" percentage (0-100) of one element.
+	 * 17" touchscreen reports only 64 x 52 bytes so the resolution is low.
+	 * This also means that there's a limited multi-touch capability but
+	 * it's disabled (and untested) here as there's no X driver for that.
+	 */
+	begin_x = end_x = begin_y = end_y = -1;
+	for (x = 0; x < x_len; x++) {
+		if (begin_x == -1 && packet->data[x] > NEXIO_THRESHOLD) {
+			begin_x = x;
+			continue;
+		}
+		if (end_x == -1 && begin_x != -1 && packet->data[x] < NEXIO_THRESHOLD) {
+			end_x = x - 1;
+			for (y = x_len; y < data_len; y++) {
+				if (begin_y == -1 && packet->data[y] > NEXIO_THRESHOLD) {
+					begin_y = y - x_len;
+					continue;
+				}
+				if (end_y == -1 &&
+				    begin_y != -1 && packet->data[y] < NEXIO_THRESHOLD) {
+					end_y = y - 1 - x_len;
+					w = end_x - begin_x;
+					h = end_y - begin_y;
+#if 0
+					/* multi-touch */
+					input_report_abs(usbtouch->input,
+						    ABS_MT_TOUCH_MAJOR, max(w,h));
+					input_report_abs(usbtouch->input,
+						    ABS_MT_TOUCH_MINOR, min(x,h));
+					input_report_abs(usbtouch->input,
+						    ABS_MT_POSITION_X, 2*begin_x+w);
+					input_report_abs(usbtouch->input,
+						    ABS_MT_POSITION_Y, 2*begin_y+h);
+					input_report_abs(usbtouch->input,
+						    ABS_MT_ORIENTATION, w > h);
+					input_mt_sync(usbtouch->input);
+#endif
+					/* single touch */
+					usbtouch->x = 2 * begin_x + w;
+					usbtouch->y = 2 * begin_y + h;
+					usbtouch->touch = packet->flags & 0x01;
+					begin_y = end_y = -1;
+					return 1;
+				}
+			}
+			begin_x = end_x = -1;
+		}
+
+	}
+	return 0;
+}
+#endif
+
+
+/*****************************************************************************
+ * ELO part
+ */
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ELO
+
+static int elo_read_data(struct usbtouch_usb *dev, unsigned char *pkt)
+{
+	dev->x = (pkt[3] << 8) | pkt[2];
+	dev->y = (pkt[5] << 8) | pkt[4];
+	dev->touch = pkt[6] > 0;
+	dev->press = pkt[6];
+
+	return 1;
+}
+#endif
+
+
+/*****************************************************************************
+ * the different device descriptors
+ */
+#ifdef MULTI_PACKET
+static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
+				   unsigned char *pkt, int len);
+#endif
+
+static struct usbtouch_device_info usbtouch_dev_info[] = {
+#ifdef CONFIG_TOUCHSCREEN_USB_ELO
+	[DEVTYPE_ELO] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.max_press	= 0xff,
+		.rept_size	= 8,
+		.read_data	= elo_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_EGALAX
+	[DEVTYPE_EGALAX] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x07ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x07ff,
+		.rept_size	= 16,
+		.process_pkt	= usbtouch_process_multi,
+		.get_pkt_len	= egalax_get_pkt_len,
+		.read_data	= egalax_read_data,
+		.init		= egalax_init,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_PANJIT
+	[DEVTYPE_PANJIT] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 8,
+		.read_data	= panjit_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_3M
+	[DEVTYPE_3M] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x4000,
+		.min_yc		= 0x0,
+		.max_yc		= 0x4000,
+		.rept_size	= 11,
+		.read_data	= mtouch_read_data,
+		.init		= mtouch_init,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ITM
+	[DEVTYPE_ITM] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.max_press	= 0xff,
+		.rept_size	= 8,
+		.read_data	= itm_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
+	[DEVTYPE_ETURBO] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x07ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x07ff,
+		.rept_size	= 8,
+		.process_pkt	= usbtouch_process_multi,
+		.get_pkt_len	= eturbo_get_pkt_len,
+		.read_data	= eturbo_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GUNZE
+	[DEVTYPE_GUNZE] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 4,
+		.read_data	= gunze_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_DMC_TSC10
+	[DEVTYPE_DMC_TSC10] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x03ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x03ff,
+		.rept_size	= 5,
+		.init		= dmc_tsc10_init,
+		.read_data	= dmc_tsc10_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_IRTOUCH
+	[DEVTYPE_IRTOUCH] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 8,
+		.read_data	= irtouch_read_data,
+	},
+
+	[DEVTYPE_IRTOUCH_HIRES] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x7fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x7fff,
+		.rept_size	= 8,
+		.read_data	= irtouch_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_IDEALTEK
+	[DEVTYPE_IDEALTEK] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 8,
+		.process_pkt	= usbtouch_process_multi,
+		.get_pkt_len	= idealtek_get_pkt_len,
+		.read_data	= idealtek_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH
+	[DEVTYPE_GENERAL_TOUCH] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x7fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x7fff,
+		.rept_size	= 7,
+		.read_data	= general_touch_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_GOTOP
+	[DEVTYPE_GOTOP] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x03ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x03ff,
+		.rept_size	= 4,
+		.read_data	= gotop_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_JASTEC
+	[DEVTYPE_JASTEC] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 4,
+		.read_data	= jastec_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_E2I
+	[DEVTYPE_E2I] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x7fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x7fff,
+		.rept_size	= 6,
+		.init		= e2i_init,
+		.read_data	= e2i_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ZYTRONIC
+	[DEVTYPE_ZYTRONIC] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x03ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x03ff,
+		.rept_size	= 5,
+		.read_data	= zytronic_read_data,
+		.irq_always     = true,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_ETT_TC45USB
+	[DEVTYPE_TC45USB] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x0fff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x0fff,
+		.rept_size	= 5,
+		.read_data	= tc45usb_read_data,
+	},
+#endif
+
+#ifdef CONFIG_TOUCHSCREEN_USB_NEXIO
+	[DEVTYPE_NEXIO] = {
+		.rept_size	= 1024,
+		.irq_always	= true,
+		.read_data	= nexio_read_data,
+		.alloc		= nexio_alloc,
+		.init		= nexio_init,
+		.exit		= nexio_exit,
+	},
+#endif
+#ifdef CONFIG_TOUCHSCREEN_USB_EASYTOUCH
+	[DEVTYPE_ETOUCH] = {
+		.min_xc		= 0x0,
+		.max_xc		= 0x07ff,
+		.min_yc		= 0x0,
+		.max_yc		= 0x07ff,
+		.rept_size	= 16,
+		.process_pkt	= usbtouch_process_multi,
+		.get_pkt_len	= etouch_get_pkt_len,
+		.read_data	= etouch_read_data,
+	},
+#endif
+};
+
+
+/*****************************************************************************
+ * Generic Part
+ */
+static void usbtouch_process_pkt(struct usbtouch_usb *usbtouch,
+                                 unsigned char *pkt, int len)
+{
+	struct usbtouch_device_info *type = usbtouch->type;
+
+	if (!type->read_data(usbtouch, pkt))
+			return;
+
+	input_report_key(usbtouch->input, BTN_TOUCH, usbtouch->touch);
+
+	if (swap_xy) {
+		input_report_abs(usbtouch->input, ABS_X, usbtouch->y);
+		input_report_abs(usbtouch->input, ABS_Y, usbtouch->x);
+	} else {
+		input_report_abs(usbtouch->input, ABS_X, usbtouch->x);
+		input_report_abs(usbtouch->input, ABS_Y, usbtouch->y);
+	}
+	if (type->max_press)
+		input_report_abs(usbtouch->input, ABS_PRESSURE, usbtouch->press);
+	input_sync(usbtouch->input);
+}
+
+
+#ifdef MULTI_PACKET
+static void usbtouch_process_multi(struct usbtouch_usb *usbtouch,
+                                   unsigned char *pkt, int len)
+{
+	unsigned char *buffer;
+	int pkt_len, pos, buf_len, tmp;
+
+	/* process buffer */
+	if (unlikely(usbtouch->buf_len)) {
+		/* try to get size */
+		pkt_len = usbtouch->type->get_pkt_len(
+				usbtouch->buffer, usbtouch->buf_len);
+
+		/* drop? */
+		if (unlikely(!pkt_len))
+			goto out_flush_buf;
+
+		/* need to append -pkt_len bytes before able to get size */
+		if (unlikely(pkt_len < 0)) {
+			int append = -pkt_len;
+			if (unlikely(append > len))
+			       append = len;
+			if (usbtouch->buf_len + append >= usbtouch->type->rept_size)
+				goto out_flush_buf;
+			memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, append);
+			usbtouch->buf_len += append;
+
+			pkt_len = usbtouch->type->get_pkt_len(
+					usbtouch->buffer, usbtouch->buf_len);
+			if (pkt_len < 0)
+				return;
+		}
+
+		/* append */
+		tmp = pkt_len - usbtouch->buf_len;
+		if (usbtouch->buf_len + tmp >= usbtouch->type->rept_size)
+			goto out_flush_buf;
+		memcpy(usbtouch->buffer + usbtouch->buf_len, pkt, tmp);
+		usbtouch_process_pkt(usbtouch, usbtouch->buffer, pkt_len);
+
+		buffer = pkt + tmp;
+		buf_len = len - tmp;
+	} else {
+		buffer = pkt;
+		buf_len = len;
+	}
+
+	/* loop over the received packet, process */
+	pos = 0;
+	while (pos < buf_len) {
+		/* get packet len */
+		pkt_len = usbtouch->type->get_pkt_len(buffer + pos,
+							buf_len - pos);
+
+		/* unknown packet: skip one byte */
+		if (unlikely(!pkt_len)) {
+			pos++;
+			continue;
+		}
+
+		/* full packet: process */
+		if (likely((pkt_len > 0) && (pkt_len <= buf_len - pos))) {
+			usbtouch_process_pkt(usbtouch, buffer + pos, pkt_len);
+		} else {
+			/* incomplete packet: save in buffer */
+			memcpy(usbtouch->buffer, buffer + pos, buf_len - pos);
+			usbtouch->buf_len = buf_len - pos;
+			return;
+		}
+		pos += pkt_len;
+	}
+
+out_flush_buf:
+	usbtouch->buf_len = 0;
+	return;
+}
+#endif
+
+
+static void usbtouch_irq(struct urb *urb)
+{
+	struct usbtouch_usb *usbtouch = urb->context;
+	struct device *dev = &usbtouch->interface->dev;
+	int retval;
+
+	switch (urb->status) {
+	case 0:
+		/* success */
+		break;
+	case -ETIME:
+		/* this urb is timing out */
+		dev_dbg(dev,
+			"%s - urb timed out - was the device unplugged?\n",
+			__func__);
+		return;
+	case -ECONNRESET:
+	case -ENOENT:
+	case -ESHUTDOWN:
+	case -EPIPE:
+		/* this urb is terminated, clean up */
+		dev_dbg(dev, "%s - urb shutting down with status: %d\n",
+			__func__, urb->status);
+		return;
+	default:
+		dev_dbg(dev, "%s - nonzero urb status received: %d\n",
+			__func__, urb->status);
+		goto exit;
+	}
+
+	usbtouch->type->process_pkt(usbtouch, usbtouch->data, urb->actual_length);
+
+exit:
+	usb_mark_last_busy(interface_to_usbdev(usbtouch->interface));
+	retval = usb_submit_urb(urb, GFP_ATOMIC);
+	if (retval)
+		dev_err(dev, "%s - usb_submit_urb failed with result: %d\n",
+			__func__, retval);
+}
+
+static int usbtouch_open(struct input_dev *input)
+{
+	struct usbtouch_usb *usbtouch = input_get_drvdata(input);
+	int r;
+
+	usbtouch->irq->dev = interface_to_usbdev(usbtouch->interface);
+
+	r = usb_autopm_get_interface(usbtouch->interface) ? -EIO : 0;
+	if (r < 0)
+		goto out;
+
+	if (!usbtouch->type->irq_always) {
+		if (usb_submit_urb(usbtouch->irq, GFP_KERNEL)) {
+			r = -EIO;
+			goto out_put;
+		}
+	}
+
+	usbtouch->interface->needs_remote_wakeup = 1;
+out_put:
+	usb_autopm_put_interface(usbtouch->interface);
+out:
+	return r;
+}
+
+static void usbtouch_close(struct input_dev *input)
+{
+	struct usbtouch_usb *usbtouch = input_get_drvdata(input);
+	int r;
+
+	if (!usbtouch->type->irq_always)
+		usb_kill_urb(usbtouch->irq);
+	r = usb_autopm_get_interface(usbtouch->interface);
+	usbtouch->interface->needs_remote_wakeup = 0;
+	if (!r)
+		usb_autopm_put_interface(usbtouch->interface);
+}
+
+static int usbtouch_suspend
+(struct usb_interface *intf, pm_message_t message)
+{
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+
+	usb_kill_urb(usbtouch->irq);
+
+	return 0;
+}
+
+static int usbtouch_resume(struct usb_interface *intf)
+{
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+	struct input_dev *input = usbtouch->input;
+	int result = 0;
+
+	mutex_lock(&input->mutex);
+	if (input->users || usbtouch->type->irq_always)
+		result = usb_submit_urb(usbtouch->irq, GFP_NOIO);
+	mutex_unlock(&input->mutex);
+
+	return result;
+}
+
+static int usbtouch_reset_resume(struct usb_interface *intf)
+{
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+	struct input_dev *input = usbtouch->input;
+	int err = 0;
+
+	/* reinit the device */
+	if (usbtouch->type->init) {
+		err = usbtouch->type->init(usbtouch);
+		if (err) {
+			dev_dbg(&intf->dev,
+				"%s - type->init() failed, err: %d\n",
+				__func__, err);
+			return err;
+		}
+	}
+
+	/* restart IO if needed */
+	mutex_lock(&input->mutex);
+	if (input->users)
+		err = usb_submit_urb(usbtouch->irq, GFP_NOIO);
+	mutex_unlock(&input->mutex);
+
+	return err;
+}
+
+static void usbtouch_free_buffers(struct usb_device *udev,
+				  struct usbtouch_usb *usbtouch)
+{
+	usb_free_coherent(udev, usbtouch->data_size,
+			  usbtouch->data, usbtouch->data_dma);
+	kfree(usbtouch->buffer);
+}
+
+static struct usb_endpoint_descriptor *
+usbtouch_get_input_endpoint(struct usb_host_interface *interface)
+{
+	int i;
+
+	for (i = 0; i < interface->desc.bNumEndpoints; i++)
+		if (usb_endpoint_dir_in(&interface->endpoint[i].desc))
+			return &interface->endpoint[i].desc;
+
+	return NULL;
+}
+
+static int usbtouch_probe(struct usb_interface *intf,
+			  const struct usb_device_id *id)
+{
+	struct usbtouch_usb *usbtouch;
+	struct input_dev *input_dev;
+	struct usb_endpoint_descriptor *endpoint;
+	struct usb_device *udev = interface_to_usbdev(intf);
+	struct usbtouch_device_info *type;
+	int err = -ENOMEM;
+
+	/* some devices are ignored */
+	if (id->driver_info == DEVTYPE_IGNORE)
+		return -ENODEV;
+
+	endpoint = usbtouch_get_input_endpoint(intf->cur_altsetting);
+	if (!endpoint)
+		return -ENXIO;
+
+	usbtouch = kzalloc(sizeof(struct usbtouch_usb), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!usbtouch || !input_dev)
+		goto out_free;
+
+	type = &usbtouch_dev_info[id->driver_info];
+	usbtouch->type = type;
+	if (!type->process_pkt)
+		type->process_pkt = usbtouch_process_pkt;
+
+	usbtouch->data_size = type->rept_size;
+	if (type->get_pkt_len) {
+		/*
+		 * When dealing with variable-length packets we should
+		 * not request more than wMaxPacketSize bytes at once
+		 * as we do not know if there is more data coming or
+		 * we filled exactly wMaxPacketSize bytes and there is
+		 * nothing else.
+		 */
+		usbtouch->data_size = min(usbtouch->data_size,
+					  usb_endpoint_maxp(endpoint));
+	}
+
+	usbtouch->data = usb_alloc_coherent(udev, usbtouch->data_size,
+					    GFP_KERNEL, &usbtouch->data_dma);
+	if (!usbtouch->data)
+		goto out_free;
+
+	if (type->get_pkt_len) {
+		usbtouch->buffer = kmalloc(type->rept_size, GFP_KERNEL);
+		if (!usbtouch->buffer)
+			goto out_free_buffers;
+	}
+
+	usbtouch->irq = usb_alloc_urb(0, GFP_KERNEL);
+	if (!usbtouch->irq) {
+		dev_dbg(&intf->dev,
+			"%s - usb_alloc_urb failed: usbtouch->irq\n", __func__);
+		goto out_free_buffers;
+	}
+
+	usbtouch->interface = intf;
+	usbtouch->input = input_dev;
+
+	if (udev->manufacturer)
+		strlcpy(usbtouch->name, udev->manufacturer, sizeof(usbtouch->name));
+
+	if (udev->product) {
+		if (udev->manufacturer)
+			strlcat(usbtouch->name, " ", sizeof(usbtouch->name));
+		strlcat(usbtouch->name, udev->product, sizeof(usbtouch->name));
+	}
+
+	if (!strlen(usbtouch->name))
+		snprintf(usbtouch->name, sizeof(usbtouch->name),
+			"USB Touchscreen %04x:%04x",
+			 le16_to_cpu(udev->descriptor.idVendor),
+			 le16_to_cpu(udev->descriptor.idProduct));
+
+	usb_make_path(udev, usbtouch->phys, sizeof(usbtouch->phys));
+	strlcat(usbtouch->phys, "/input0", sizeof(usbtouch->phys));
+
+	input_dev->name = usbtouch->name;
+	input_dev->phys = usbtouch->phys;
+	usb_to_input_id(udev, &input_dev->id);
+	input_dev->dev.parent = &intf->dev;
+
+	input_set_drvdata(input_dev, usbtouch);
+
+	input_dev->open = usbtouch_open;
+	input_dev->close = usbtouch_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+	input_set_abs_params(input_dev, ABS_X, type->min_xc, type->max_xc, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, type->min_yc, type->max_yc, 0, 0);
+	if (type->max_press)
+		input_set_abs_params(input_dev, ABS_PRESSURE, type->min_press,
+		                     type->max_press, 0, 0);
+
+	if (usb_endpoint_type(endpoint) == USB_ENDPOINT_XFER_INT)
+		usb_fill_int_urb(usbtouch->irq, udev,
+			 usb_rcvintpipe(udev, endpoint->bEndpointAddress),
+			 usbtouch->data, usbtouch->data_size,
+			 usbtouch_irq, usbtouch, endpoint->bInterval);
+	else
+		usb_fill_bulk_urb(usbtouch->irq, udev,
+			 usb_rcvbulkpipe(udev, endpoint->bEndpointAddress),
+			 usbtouch->data, usbtouch->data_size,
+			 usbtouch_irq, usbtouch);
+
+	usbtouch->irq->dev = udev;
+	usbtouch->irq->transfer_dma = usbtouch->data_dma;
+	usbtouch->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+	/* device specific allocations */
+	if (type->alloc) {
+		err = type->alloc(usbtouch);
+		if (err) {
+			dev_dbg(&intf->dev,
+				"%s - type->alloc() failed, err: %d\n",
+				__func__, err);
+			goto out_free_urb;
+		}
+	}
+
+	/* device specific initialisation*/
+	if (type->init) {
+		err = type->init(usbtouch);
+		if (err) {
+			dev_dbg(&intf->dev,
+				"%s - type->init() failed, err: %d\n",
+				__func__, err);
+			goto out_do_exit;
+		}
+	}
+
+	err = input_register_device(usbtouch->input);
+	if (err) {
+		dev_dbg(&intf->dev,
+			"%s - input_register_device failed, err: %d\n",
+			__func__, err);
+		goto out_do_exit;
+	}
+
+	usb_set_intfdata(intf, usbtouch);
+
+	if (usbtouch->type->irq_always) {
+		/* this can't fail */
+		usb_autopm_get_interface(intf);
+		err = usb_submit_urb(usbtouch->irq, GFP_KERNEL);
+		if (err) {
+			usb_autopm_put_interface(intf);
+			dev_err(&intf->dev,
+				"%s - usb_submit_urb failed with result: %d\n",
+				__func__, err);
+			goto out_unregister_input;
+		}
+	}
+
+	return 0;
+
+out_unregister_input:
+	input_unregister_device(input_dev);
+	input_dev = NULL;
+out_do_exit:
+	if (type->exit)
+		type->exit(usbtouch);
+out_free_urb:
+	usb_free_urb(usbtouch->irq);
+out_free_buffers:
+	usbtouch_free_buffers(udev, usbtouch);
+out_free:
+	input_free_device(input_dev);
+	kfree(usbtouch);
+	return err;
+}
+
+static void usbtouch_disconnect(struct usb_interface *intf)
+{
+	struct usbtouch_usb *usbtouch = usb_get_intfdata(intf);
+
+	if (!usbtouch)
+		return;
+
+	dev_dbg(&intf->dev,
+		"%s - usbtouch is initialized, cleaning up\n", __func__);
+
+	usb_set_intfdata(intf, NULL);
+	/* this will stop IO via close */
+	input_unregister_device(usbtouch->input);
+	usb_free_urb(usbtouch->irq);
+	if (usbtouch->type->exit)
+		usbtouch->type->exit(usbtouch);
+	usbtouch_free_buffers(interface_to_usbdev(intf), usbtouch);
+	kfree(usbtouch);
+}
+
+MODULE_DEVICE_TABLE(usb, usbtouch_devices);
+
+static struct usb_driver usbtouch_driver = {
+	.name		= "usbtouchscreen",
+	.probe		= usbtouch_probe,
+	.disconnect	= usbtouch_disconnect,
+	.suspend	= usbtouch_suspend,
+	.resume		= usbtouch_resume,
+	.reset_resume	= usbtouch_reset_resume,
+	.id_table	= usbtouch_devices,
+	.supports_autosuspend = 1,
+};
+
+module_usb_driver(usbtouch_driver);
+
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+MODULE_ALIAS("touchkitusb");
+MODULE_ALIAS("itmtouch");
+MODULE_ALIAS("mtouchusb");
diff --git a/drivers/input/touchscreen/w90p910_ts.c b/drivers/input/touchscreen/w90p910_ts.c
new file mode 100644
index 0000000..da6004e
--- /dev/null
+++ b/drivers/input/touchscreen/w90p910_ts.c
@@ -0,0 +1,336 @@
+/*
+ * Copyright (c) 2008 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+/* ADC controller bit defines */
+#define ADC_DELAY	0xf00
+#define ADC_DOWN	0x01
+#define ADC_TSC_Y	(0x01 << 8)
+#define ADC_TSC_X	(0x00 << 8)
+#define TSC_FOURWIRE	(~(0x03 << 1))
+#define ADC_CLK_EN	(0x01 << 28)	/* ADC clock enable */
+#define ADC_READ_CON	(0x01 << 12)
+#define ADC_CONV	(0x01 << 13)
+#define ADC_SEMIAUTO	(0x01 << 14)
+#define ADC_WAITTRIG	(0x03 << 14)
+#define ADC_RST1	(0x01 << 16)
+#define ADC_RST0	(0x00 << 16)
+#define ADC_EN		(0x01 << 17)
+#define ADC_INT		(0x01 << 18)
+#define WT_INT		(0x01 << 20)
+#define ADC_INT_EN	(0x01 << 21)
+#define LVD_INT_EN	(0x01 << 22)
+#define WT_INT_EN	(0x01 << 23)
+#define ADC_DIV		(0x04 << 1)	/* div = 6 */
+
+enum ts_state {
+	TS_WAIT_NEW_PACKET,	/* We are waiting next touch report */
+	TS_WAIT_X_COORD,	/* We are waiting for ADC to report X coord */
+	TS_WAIT_Y_COORD,	/* We are waiting for ADC to report Y coord */
+	TS_IDLE,		/* Input device is closed, don't do anything */
+};
+
+struct w90p910_ts {
+	struct input_dev *input;
+	struct timer_list timer;
+	struct clk *clk;
+	int irq_num;
+	void __iomem *ts_reg;
+	spinlock_t lock;
+	enum ts_state state;
+};
+
+static void w90p910_report_event(struct w90p910_ts *w90p910_ts, bool down)
+{
+	struct input_dev *dev = w90p910_ts->input;
+
+	if (down) {
+		input_report_abs(dev, ABS_X,
+				 __raw_readl(w90p910_ts->ts_reg + 0x0c));
+		input_report_abs(dev, ABS_Y,
+				 __raw_readl(w90p910_ts->ts_reg + 0x10));
+	}
+
+	input_report_key(dev, BTN_TOUCH, down);
+	input_sync(dev);
+}
+
+static void w90p910_prepare_x_reading(struct w90p910_ts *w90p910_ts)
+{
+	unsigned long ctlreg;
+
+	__raw_writel(ADC_TSC_X, w90p910_ts->ts_reg + 0x04);
+	ctlreg = __raw_readl(w90p910_ts->ts_reg);
+	ctlreg &= ~(ADC_WAITTRIG | WT_INT | WT_INT_EN);
+	ctlreg |= ADC_SEMIAUTO | ADC_INT_EN | ADC_CONV;
+	__raw_writel(ctlreg, w90p910_ts->ts_reg);
+
+	w90p910_ts->state = TS_WAIT_X_COORD;
+}
+
+static void w90p910_prepare_y_reading(struct w90p910_ts *w90p910_ts)
+{
+	unsigned long ctlreg;
+
+	__raw_writel(ADC_TSC_Y, w90p910_ts->ts_reg + 0x04);
+	ctlreg = __raw_readl(w90p910_ts->ts_reg);
+	ctlreg &= ~(ADC_WAITTRIG | ADC_INT | WT_INT_EN);
+	ctlreg |= ADC_SEMIAUTO | ADC_INT_EN | ADC_CONV;
+	__raw_writel(ctlreg, w90p910_ts->ts_reg);
+
+	w90p910_ts->state = TS_WAIT_Y_COORD;
+}
+
+static void w90p910_prepare_next_packet(struct w90p910_ts *w90p910_ts)
+{
+	unsigned long ctlreg;
+
+	ctlreg = __raw_readl(w90p910_ts->ts_reg);
+	ctlreg &= ~(ADC_INT | ADC_INT_EN | ADC_SEMIAUTO | ADC_CONV);
+	ctlreg |= ADC_WAITTRIG | WT_INT_EN;
+	__raw_writel(ctlreg, w90p910_ts->ts_reg);
+
+	w90p910_ts->state = TS_WAIT_NEW_PACKET;
+}
+
+static irqreturn_t w90p910_ts_interrupt(int irq, void *dev_id)
+{
+	struct w90p910_ts *w90p910_ts = dev_id;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_ts->lock, flags);
+
+	switch (w90p910_ts->state) {
+	case TS_WAIT_NEW_PACKET:
+		/*
+		 * The controller only generates interrupts when pen
+		 * is down.
+		 */
+		del_timer(&w90p910_ts->timer);
+		w90p910_prepare_x_reading(w90p910_ts);
+		break;
+
+
+	case TS_WAIT_X_COORD:
+		w90p910_prepare_y_reading(w90p910_ts);
+		break;
+
+	case TS_WAIT_Y_COORD:
+		w90p910_report_event(w90p910_ts, true);
+		w90p910_prepare_next_packet(w90p910_ts);
+		mod_timer(&w90p910_ts->timer, jiffies + msecs_to_jiffies(100));
+		break;
+
+	case TS_IDLE:
+		break;
+	}
+
+	spin_unlock_irqrestore(&w90p910_ts->lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+static void w90p910_check_pen_up(unsigned long data)
+{
+	struct w90p910_ts *w90p910_ts = (struct w90p910_ts *) data;
+	unsigned long flags;
+
+	spin_lock_irqsave(&w90p910_ts->lock, flags);
+
+	if (w90p910_ts->state == TS_WAIT_NEW_PACKET &&
+	    !(__raw_readl(w90p910_ts->ts_reg + 0x04) & ADC_DOWN)) {
+
+		w90p910_report_event(w90p910_ts, false);
+	}
+
+	spin_unlock_irqrestore(&w90p910_ts->lock, flags);
+}
+
+static int w90p910_open(struct input_dev *dev)
+{
+	struct w90p910_ts *w90p910_ts = input_get_drvdata(dev);
+	unsigned long val;
+
+	/* enable the ADC clock */
+	clk_enable(w90p910_ts->clk);
+
+	__raw_writel(ADC_RST1, w90p910_ts->ts_reg);
+	msleep(1);
+	__raw_writel(ADC_RST0, w90p910_ts->ts_reg);
+	msleep(1);
+
+	/* set delay and screen type */
+	val = __raw_readl(w90p910_ts->ts_reg + 0x04);
+	__raw_writel(val & TSC_FOURWIRE, w90p910_ts->ts_reg + 0x04);
+	__raw_writel(ADC_DELAY, w90p910_ts->ts_reg + 0x08);
+
+	w90p910_ts->state = TS_WAIT_NEW_PACKET;
+	wmb();
+
+	/* set trigger mode */
+	val = __raw_readl(w90p910_ts->ts_reg);
+	val |= ADC_WAITTRIG | ADC_DIV | ADC_EN | WT_INT_EN;
+	__raw_writel(val, w90p910_ts->ts_reg);
+
+	return 0;
+}
+
+static void w90p910_close(struct input_dev *dev)
+{
+	struct w90p910_ts *w90p910_ts = input_get_drvdata(dev);
+	unsigned long val;
+
+	/* disable trigger mode */
+
+	spin_lock_irq(&w90p910_ts->lock);
+
+	w90p910_ts->state = TS_IDLE;
+
+	val = __raw_readl(w90p910_ts->ts_reg);
+	val &= ~(ADC_WAITTRIG | ADC_DIV | ADC_EN | WT_INT_EN | ADC_INT_EN);
+	__raw_writel(val, w90p910_ts->ts_reg);
+
+	spin_unlock_irq(&w90p910_ts->lock);
+
+	/* Now that interrupts are shut off we can safely delete timer */
+	del_timer_sync(&w90p910_ts->timer);
+
+	/* stop the ADC clock */
+	clk_disable(w90p910_ts->clk);
+}
+
+static int w90x900ts_probe(struct platform_device *pdev)
+{
+	struct w90p910_ts *w90p910_ts;
+	struct input_dev *input_dev;
+	struct resource *res;
+	int err;
+
+	w90p910_ts = kzalloc(sizeof(struct w90p910_ts), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!w90p910_ts || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	w90p910_ts->input = input_dev;
+	w90p910_ts->state = TS_IDLE;
+	spin_lock_init(&w90p910_ts->lock);
+	setup_timer(&w90p910_ts->timer, w90p910_check_pen_up,
+		    (unsigned long)w90p910_ts);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		err = -ENXIO;
+		goto fail1;
+	}
+
+	if (!request_mem_region(res->start, resource_size(res),
+				pdev->name)) {
+		err = -EBUSY;
+		goto fail1;
+	}
+
+	w90p910_ts->ts_reg = ioremap(res->start, resource_size(res));
+	if (!w90p910_ts->ts_reg) {
+		err = -ENOMEM;
+		goto fail2;
+	}
+
+	w90p910_ts->clk = clk_get(&pdev->dev, NULL);
+	if (IS_ERR(w90p910_ts->clk)) {
+		err = PTR_ERR(w90p910_ts->clk);
+		goto fail3;
+	}
+
+	input_dev->name = "W90P910 TouchScreen";
+	input_dev->phys = "w90p910ts/event0";
+	input_dev->id.bustype = BUS_HOST;
+	input_dev->id.vendor  = 0x0005;
+	input_dev->id.product = 0x0001;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &pdev->dev;
+	input_dev->open = w90p910_open;
+	input_dev->close = w90p910_close;
+
+	input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 0x400, 0, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 0x400, 0, 0);
+
+	input_set_drvdata(input_dev, w90p910_ts);
+
+	w90p910_ts->irq_num = platform_get_irq(pdev, 0);
+	if (request_irq(w90p910_ts->irq_num, w90p910_ts_interrupt,
+			0, "w90p910ts", w90p910_ts)) {
+		err = -EBUSY;
+		goto fail4;
+	}
+
+	err = input_register_device(w90p910_ts->input);
+	if (err)
+		goto fail5;
+
+	platform_set_drvdata(pdev, w90p910_ts);
+
+	return 0;
+
+fail5:	free_irq(w90p910_ts->irq_num, w90p910_ts);
+fail4:	clk_put(w90p910_ts->clk);
+fail3:	iounmap(w90p910_ts->ts_reg);
+fail2:	release_mem_region(res->start, resource_size(res));
+fail1:	input_free_device(input_dev);
+	kfree(w90p910_ts);
+	return err;
+}
+
+static int w90x900ts_remove(struct platform_device *pdev)
+{
+	struct w90p910_ts *w90p910_ts = platform_get_drvdata(pdev);
+	struct resource *res;
+
+	free_irq(w90p910_ts->irq_num, w90p910_ts);
+	del_timer_sync(&w90p910_ts->timer);
+	iounmap(w90p910_ts->ts_reg);
+
+	clk_put(w90p910_ts->clk);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(res->start, resource_size(res));
+
+	input_unregister_device(w90p910_ts->input);
+	kfree(w90p910_ts);
+
+	return 0;
+}
+
+static struct platform_driver w90x900ts_driver = {
+	.probe		= w90x900ts_probe,
+	.remove		= w90x900ts_remove,
+	.driver		= {
+		.name	= "nuc900-ts",
+	},
+};
+module_platform_driver(w90x900ts_driver);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910 touch screen driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-ts");
diff --git a/drivers/input/touchscreen/wacom_i2c.c b/drivers/input/touchscreen/wacom_i2c.c
new file mode 100644
index 0000000..8d7a285
--- /dev/null
+++ b/drivers/input/touchscreen/wacom_i2c.c
@@ -0,0 +1,285 @@
+/*
+ * Wacom Penabled Driver for I2C
+ *
+ * Copyright (c) 2011 - 2013 Tatsunosuke Tobita, Wacom.
+ * <tobita.tatsunosuke@wacom.co.jp>
+ *
+ * This program is free software; you can redistribute it
+ * and/or modify it under the terms of the GNU General
+ * Public License as published by the Free Software
+ * Foundation; either version of 2 of the License,
+ * or (at your option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/i2c.h>
+#include <linux/slab.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/gpio.h>
+#include <asm/unaligned.h>
+
+#define WACOM_CMD_QUERY0	0x04
+#define WACOM_CMD_QUERY1	0x00
+#define WACOM_CMD_QUERY2	0x33
+#define WACOM_CMD_QUERY3	0x02
+#define WACOM_CMD_THROW0	0x05
+#define WACOM_CMD_THROW1	0x00
+#define WACOM_QUERY_SIZE	19
+
+struct wacom_features {
+	int x_max;
+	int y_max;
+	int pressure_max;
+	char fw_version;
+};
+
+struct wacom_i2c {
+	struct i2c_client *client;
+	struct input_dev *input;
+	u8 data[WACOM_QUERY_SIZE];
+	bool prox;
+	int tool;
+};
+
+static int wacom_query_device(struct i2c_client *client,
+			      struct wacom_features *features)
+{
+	int ret;
+	u8 cmd1[] = { WACOM_CMD_QUERY0, WACOM_CMD_QUERY1,
+			WACOM_CMD_QUERY2, WACOM_CMD_QUERY3 };
+	u8 cmd2[] = { WACOM_CMD_THROW0, WACOM_CMD_THROW1 };
+	u8 data[WACOM_QUERY_SIZE];
+	struct i2c_msg msgs[] = {
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = sizeof(cmd1),
+			.buf = cmd1,
+		},
+		{
+			.addr = client->addr,
+			.flags = 0,
+			.len = sizeof(cmd2),
+			.buf = cmd2,
+		},
+		{
+			.addr = client->addr,
+			.flags = I2C_M_RD,
+			.len = sizeof(data),
+			.buf = data,
+		},
+	};
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		return ret;
+	if (ret != ARRAY_SIZE(msgs))
+		return -EIO;
+
+	features->x_max = get_unaligned_le16(&data[3]);
+	features->y_max = get_unaligned_le16(&data[5]);
+	features->pressure_max = get_unaligned_le16(&data[11]);
+	features->fw_version = get_unaligned_le16(&data[13]);
+
+	dev_dbg(&client->dev,
+		"x_max:%d, y_max:%d, pressure:%d, fw:%d\n",
+		features->x_max, features->y_max,
+		features->pressure_max, features->fw_version);
+
+	return 0;
+}
+
+static irqreturn_t wacom_i2c_irq(int irq, void *dev_id)
+{
+	struct wacom_i2c *wac_i2c = dev_id;
+	struct input_dev *input = wac_i2c->input;
+	u8 *data = wac_i2c->data;
+	unsigned int x, y, pressure;
+	unsigned char tsw, f1, f2, ers;
+	int error;
+
+	error = i2c_master_recv(wac_i2c->client,
+				wac_i2c->data, sizeof(wac_i2c->data));
+	if (error < 0)
+		goto out;
+
+	tsw = data[3] & 0x01;
+	ers = data[3] & 0x04;
+	f1 = data[3] & 0x02;
+	f2 = data[3] & 0x10;
+	x = le16_to_cpup((__le16 *)&data[4]);
+	y = le16_to_cpup((__le16 *)&data[6]);
+	pressure = le16_to_cpup((__le16 *)&data[8]);
+
+	if (!wac_i2c->prox)
+		wac_i2c->tool = (data[3] & 0x0c) ?
+			BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+
+	wac_i2c->prox = data[3] & 0x20;
+
+	input_report_key(input, BTN_TOUCH, tsw || ers);
+	input_report_key(input, wac_i2c->tool, wac_i2c->prox);
+	input_report_key(input, BTN_STYLUS, f1);
+	input_report_key(input, BTN_STYLUS2, f2);
+	input_report_abs(input, ABS_X, x);
+	input_report_abs(input, ABS_Y, y);
+	input_report_abs(input, ABS_PRESSURE, pressure);
+	input_sync(input);
+
+out:
+	return IRQ_HANDLED;
+}
+
+static int wacom_i2c_open(struct input_dev *dev)
+{
+	struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
+	struct i2c_client *client = wac_i2c->client;
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static void wacom_i2c_close(struct input_dev *dev)
+{
+	struct wacom_i2c *wac_i2c = input_get_drvdata(dev);
+	struct i2c_client *client = wac_i2c->client;
+
+	disable_irq(client->irq);
+}
+
+static int wacom_i2c_probe(struct i2c_client *client,
+				     const struct i2c_device_id *id)
+{
+	struct wacom_i2c *wac_i2c;
+	struct input_dev *input;
+	struct wacom_features features = { 0 };
+	int error;
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
+		dev_err(&client->dev, "i2c_check_functionality error\n");
+		return -EIO;
+	}
+
+	error = wacom_query_device(client, &features);
+	if (error)
+		return error;
+
+	wac_i2c = kzalloc(sizeof(*wac_i2c), GFP_KERNEL);
+	input = input_allocate_device();
+	if (!wac_i2c || !input) {
+		error = -ENOMEM;
+		goto err_free_mem;
+	}
+
+	wac_i2c->client = client;
+	wac_i2c->input = input;
+
+	input->name = "Wacom I2C Digitizer";
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = 0x56a;
+	input->id.version = features.fw_version;
+	input->dev.parent = &client->dev;
+	input->open = wacom_i2c_open;
+	input->close = wacom_i2c_close;
+
+	input->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+
+	__set_bit(BTN_TOOL_PEN, input->keybit);
+	__set_bit(BTN_TOOL_RUBBER, input->keybit);
+	__set_bit(BTN_STYLUS, input->keybit);
+	__set_bit(BTN_STYLUS2, input->keybit);
+	__set_bit(BTN_TOUCH, input->keybit);
+
+	input_set_abs_params(input, ABS_X, 0, features.x_max, 0, 0);
+	input_set_abs_params(input, ABS_Y, 0, features.y_max, 0, 0);
+	input_set_abs_params(input, ABS_PRESSURE,
+			     0, features.pressure_max, 0, 0);
+
+	input_set_drvdata(input, wac_i2c);
+
+	error = request_threaded_irq(client->irq, NULL, wacom_i2c_irq,
+				     IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+				     "wacom_i2c", wac_i2c);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to enable IRQ, error: %d\n", error);
+		goto err_free_mem;
+	}
+
+	/* Disable the IRQ, we'll enable it in wac_i2c_open() */
+	disable_irq(client->irq);
+
+	error = input_register_device(wac_i2c->input);
+	if (error) {
+		dev_err(&client->dev,
+			"Failed to register input device, error: %d\n", error);
+		goto err_free_irq;
+	}
+
+	i2c_set_clientdata(client, wac_i2c);
+	return 0;
+
+err_free_irq:
+	free_irq(client->irq, wac_i2c);
+err_free_mem:
+	input_free_device(input);
+	kfree(wac_i2c);
+
+	return error;
+}
+
+static int wacom_i2c_remove(struct i2c_client *client)
+{
+	struct wacom_i2c *wac_i2c = i2c_get_clientdata(client);
+
+	free_irq(client->irq, wac_i2c);
+	input_unregister_device(wac_i2c->input);
+	kfree(wac_i2c);
+
+	return 0;
+}
+
+static int __maybe_unused wacom_i2c_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	disable_irq(client->irq);
+
+	return 0;
+}
+
+static int __maybe_unused wacom_i2c_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(wacom_i2c_pm, wacom_i2c_suspend, wacom_i2c_resume);
+
+static const struct i2c_device_id wacom_i2c_id[] = {
+	{ "WAC_I2C_EMR", 0 },
+	{ },
+};
+MODULE_DEVICE_TABLE(i2c, wacom_i2c_id);
+
+static struct i2c_driver wacom_i2c_driver = {
+	.driver	= {
+		.name	= "wacom_i2c",
+		.pm	= &wacom_i2c_pm,
+	},
+
+	.probe		= wacom_i2c_probe,
+	.remove		= wacom_i2c_remove,
+	.id_table	= wacom_i2c_id,
+};
+module_i2c_driver(wacom_i2c_driver);
+
+MODULE_AUTHOR("Tatsunosuke Tobita <tobita.tatsunosuke@wacom.co.jp>");
+MODULE_DESCRIPTION("WACOM EMR I2C Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c
new file mode 100644
index 0000000..3ed0ce1
--- /dev/null
+++ b/drivers/input/touchscreen/wacom_w8001.c
@@ -0,0 +1,596 @@
+/*
+ * Wacom W8001 penabled serial touchscreen driver
+ *
+ * Copyright (c) 2008 Jaya Kumar
+ * Copyright (c) 2010 Red Hat, Inc.
+ * Copyright (c) 2010 - 2011 Ping Cheng, Wacom. <pingc@wacom.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ *
+ * Layout based on Elo serial touchscreen driver by Vojtech Pavlik
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input/mt.h>
+#include <linux/serio.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+
+#define DRIVER_DESC	"Wacom W8001 serial touchscreen driver"
+
+MODULE_AUTHOR("Jaya Kumar <jayakumar.lkml@gmail.com>");
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");
+
+#define W8001_MAX_LENGTH	13
+#define W8001_LEAD_MASK		0x80
+#define W8001_LEAD_BYTE		0x80
+#define W8001_TAB_MASK		0x40
+#define W8001_TAB_BYTE		0x40
+/* set in first byte of touch data packets */
+#define W8001_TOUCH_MASK	(0x10 | W8001_LEAD_MASK)
+#define W8001_TOUCH_BYTE	(0x10 | W8001_LEAD_BYTE)
+
+#define W8001_QUERY_PACKET	0x20
+
+#define W8001_CMD_STOP		'0'
+#define W8001_CMD_START		'1'
+#define W8001_CMD_QUERY		'*'
+#define W8001_CMD_TOUCHQUERY	'%'
+
+/* length of data packets in bytes, depends on device. */
+#define W8001_PKTLEN_TOUCH93	5
+#define W8001_PKTLEN_TOUCH9A	7
+#define W8001_PKTLEN_TPCPEN	9
+#define W8001_PKTLEN_TPCCTL	11	/* control packet */
+#define W8001_PKTLEN_TOUCH2FG	13
+
+/* resolution in points/mm */
+#define W8001_PEN_RESOLUTION    100
+#define W8001_TOUCH_RESOLUTION  10
+
+struct w8001_coord {
+	u8 rdy;
+	u8 tsw;
+	u8 f1;
+	u8 f2;
+	u16 x;
+	u16 y;
+	u16 pen_pressure;
+	u8 tilt_x;
+	u8 tilt_y;
+};
+
+/* touch query reply packet */
+struct w8001_touch_query {
+	u16 x;
+	u16 y;
+	u8 panel_res;
+	u8 capacity_res;
+	u8 sensor_id;
+};
+
+/*
+ * Per-touchscreen data.
+ */
+
+struct w8001 {
+	struct input_dev *dev;
+	struct serio *serio;
+	struct completion cmd_done;
+	int id;
+	int idx;
+	unsigned char response_type;
+	unsigned char response[W8001_MAX_LENGTH];
+	unsigned char data[W8001_MAX_LENGTH];
+	char phys[32];
+	int type;
+	unsigned int pktlen;
+	u16 max_touch_x;
+	u16 max_touch_y;
+	u16 max_pen_x;
+	u16 max_pen_y;
+	char name[64];
+};
+
+static void parse_pen_data(u8 *data, struct w8001_coord *coord)
+{
+	memset(coord, 0, sizeof(*coord));
+
+	coord->rdy = data[0] & 0x20;
+	coord->tsw = data[0] & 0x01;
+	coord->f1 = data[0] & 0x02;
+	coord->f2 = data[0] & 0x04;
+
+	coord->x = (data[1] & 0x7F) << 9;
+	coord->x |= (data[2] & 0x7F) << 2;
+	coord->x |= (data[6] & 0x60) >> 5;
+
+	coord->y = (data[3] & 0x7F) << 9;
+	coord->y |= (data[4] & 0x7F) << 2;
+	coord->y |= (data[6] & 0x18) >> 3;
+
+	coord->pen_pressure = data[5] & 0x7F;
+	coord->pen_pressure |= (data[6] & 0x07) << 7 ;
+
+	coord->tilt_x = data[7] & 0x7F;
+	coord->tilt_y = data[8] & 0x7F;
+}
+
+static void parse_single_touch(u8 *data, struct w8001_coord *coord)
+{
+	coord->x = (data[1] << 7) | data[2];
+	coord->y = (data[3] << 7) | data[4];
+	coord->tsw = data[0] & 0x01;
+}
+
+static void scale_touch_coordinates(struct w8001 *w8001,
+				    unsigned int *x, unsigned int *y)
+{
+	if (w8001->max_pen_x && w8001->max_touch_x)
+		*x = *x * w8001->max_pen_x / w8001->max_touch_x;
+
+	if (w8001->max_pen_y && w8001->max_touch_y)
+		*y = *y * w8001->max_pen_y / w8001->max_touch_y;
+}
+
+static void parse_multi_touch(struct w8001 *w8001)
+{
+	struct input_dev *dev = w8001->dev;
+	unsigned char *data = w8001->data;
+	unsigned int x, y;
+	int i;
+	int count = 0;
+
+	for (i = 0; i < 2; i++) {
+		bool touch = data[0] & (1 << i);
+
+		input_mt_slot(dev, i);
+		input_mt_report_slot_state(dev, MT_TOOL_FINGER, touch);
+		if (touch) {
+			x = (data[6 * i + 1] << 7) | data[6 * i + 2];
+			y = (data[6 * i + 3] << 7) | data[6 * i + 4];
+			/* data[5,6] and [11,12] is finger capacity */
+
+			/* scale to pen maximum */
+			scale_touch_coordinates(w8001, &x, &y);
+
+			input_report_abs(dev, ABS_MT_POSITION_X, x);
+			input_report_abs(dev, ABS_MT_POSITION_Y, y);
+			count++;
+		}
+	}
+
+	/* emulate single touch events when stylus is out of proximity.
+	 * This is to make single touch backward support consistent
+	 * across all Wacom single touch devices.
+	 */
+	if (w8001->type != BTN_TOOL_PEN &&
+			    w8001->type != BTN_TOOL_RUBBER) {
+		w8001->type = count == 1 ? BTN_TOOL_FINGER : KEY_RESERVED;
+		input_mt_report_pointer_emulation(dev, true);
+	}
+
+	input_sync(dev);
+}
+
+static void parse_touchquery(u8 *data, struct w8001_touch_query *query)
+{
+	memset(query, 0, sizeof(*query));
+
+	query->panel_res = data[1];
+	query->sensor_id = data[2] & 0x7;
+	query->capacity_res = data[7];
+
+	query->x = data[3] << 9;
+	query->x |= data[4] << 2;
+	query->x |= (data[2] >> 5) & 0x3;
+
+	query->y = data[5] << 9;
+	query->y |= data[6] << 2;
+	query->y |= (data[2] >> 3) & 0x3;
+
+	/* Early days' single-finger touch models need the following defaults */
+	if (!query->x && !query->y) {
+		query->x = 1024;
+		query->y = 1024;
+		if (query->panel_res)
+			query->x = query->y = (1 << query->panel_res);
+		query->panel_res = W8001_TOUCH_RESOLUTION;
+	}
+}
+
+static void report_pen_events(struct w8001 *w8001, struct w8001_coord *coord)
+{
+	struct input_dev *dev = w8001->dev;
+
+	/*
+	 * We have 1 bit for proximity (rdy) and 3 bits for tip, side,
+	 * side2/eraser. If rdy && f2 are set, this can be either pen + side2,
+	 * or eraser. Assume:
+	 * - if dev is already in proximity and f2 is toggled → pen + side2
+	 * - if dev comes into proximity with f2 set → eraser
+	 * If f2 disappears after assuming eraser, fake proximity out for
+	 * eraser and in for pen.
+	 */
+
+	switch (w8001->type) {
+	case BTN_TOOL_RUBBER:
+		if (!coord->f2) {
+			input_report_abs(dev, ABS_PRESSURE, 0);
+			input_report_key(dev, BTN_TOUCH, 0);
+			input_report_key(dev, BTN_STYLUS, 0);
+			input_report_key(dev, BTN_STYLUS2, 0);
+			input_report_key(dev, BTN_TOOL_RUBBER, 0);
+			input_sync(dev);
+			w8001->type = BTN_TOOL_PEN;
+		}
+		break;
+
+	case BTN_TOOL_FINGER:
+		input_report_key(dev, BTN_TOUCH, 0);
+		input_report_key(dev, BTN_TOOL_FINGER, 0);
+		input_sync(dev);
+		/* fall through */
+
+	case KEY_RESERVED:
+		w8001->type = coord->f2 ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
+		break;
+
+	default:
+		input_report_key(dev, BTN_STYLUS2, coord->f2);
+		break;
+	}
+
+	input_report_abs(dev, ABS_X, coord->x);
+	input_report_abs(dev, ABS_Y, coord->y);
+	input_report_abs(dev, ABS_PRESSURE, coord->pen_pressure);
+	input_report_key(dev, BTN_TOUCH, coord->tsw);
+	input_report_key(dev, BTN_STYLUS, coord->f1);
+	input_report_key(dev, w8001->type, coord->rdy);
+	input_sync(dev);
+
+	if (!coord->rdy)
+		w8001->type = KEY_RESERVED;
+}
+
+static void report_single_touch(struct w8001 *w8001, struct w8001_coord *coord)
+{
+	struct input_dev *dev = w8001->dev;
+	unsigned int x = coord->x;
+	unsigned int y = coord->y;
+
+	/* scale to pen maximum */
+	scale_touch_coordinates(w8001, &x, &y);
+
+	input_report_abs(dev, ABS_X, x);
+	input_report_abs(dev, ABS_Y, y);
+	input_report_key(dev, BTN_TOUCH, coord->tsw);
+	input_report_key(dev, BTN_TOOL_FINGER, coord->tsw);
+
+	input_sync(dev);
+
+	w8001->type = coord->tsw ? BTN_TOOL_FINGER : KEY_RESERVED;
+}
+
+static irqreturn_t w8001_interrupt(struct serio *serio,
+				   unsigned char data, unsigned int flags)
+{
+	struct w8001 *w8001 = serio_get_drvdata(serio);
+	struct w8001_coord coord;
+	unsigned char tmp;
+
+	w8001->data[w8001->idx] = data;
+	switch (w8001->idx++) {
+	case 0:
+		if ((data & W8001_LEAD_MASK) != W8001_LEAD_BYTE) {
+			pr_debug("w8001: unsynchronized data: 0x%02x\n", data);
+			w8001->idx = 0;
+		}
+		break;
+
+	case W8001_PKTLEN_TOUCH93 - 1:
+	case W8001_PKTLEN_TOUCH9A - 1:
+		tmp = w8001->data[0] & W8001_TOUCH_BYTE;
+		if (tmp != W8001_TOUCH_BYTE)
+			break;
+
+		if (w8001->pktlen == w8001->idx) {
+			w8001->idx = 0;
+			if (w8001->type != BTN_TOOL_PEN &&
+			    w8001->type != BTN_TOOL_RUBBER) {
+				parse_single_touch(w8001->data, &coord);
+				report_single_touch(w8001, &coord);
+			}
+		}
+		break;
+
+	/* Pen coordinates packet */
+	case W8001_PKTLEN_TPCPEN - 1:
+		tmp = w8001->data[0] & W8001_TAB_MASK;
+		if (unlikely(tmp == W8001_TAB_BYTE))
+			break;
+
+		tmp = w8001->data[0] & W8001_TOUCH_BYTE;
+		if (tmp == W8001_TOUCH_BYTE)
+			break;
+
+		w8001->idx = 0;
+		parse_pen_data(w8001->data, &coord);
+		report_pen_events(w8001, &coord);
+		break;
+
+	/* control packet */
+	case W8001_PKTLEN_TPCCTL - 1:
+		tmp = w8001->data[0] & W8001_TOUCH_MASK;
+		if (tmp == W8001_TOUCH_BYTE)
+			break;
+
+		w8001->idx = 0;
+		memcpy(w8001->response, w8001->data, W8001_MAX_LENGTH);
+		w8001->response_type = W8001_QUERY_PACKET;
+		complete(&w8001->cmd_done);
+		break;
+
+	/* 2 finger touch packet */
+	case W8001_PKTLEN_TOUCH2FG - 1:
+		w8001->idx = 0;
+		parse_multi_touch(w8001);
+		break;
+	}
+
+	return IRQ_HANDLED;
+}
+
+static int w8001_command(struct w8001 *w8001, unsigned char command,
+			 bool wait_response)
+{
+	int rc;
+
+	w8001->response_type = 0;
+	init_completion(&w8001->cmd_done);
+
+	rc = serio_write(w8001->serio, command);
+	if (rc == 0 && wait_response) {
+
+		wait_for_completion_timeout(&w8001->cmd_done, HZ);
+		if (w8001->response_type != W8001_QUERY_PACKET)
+			rc = -EIO;
+	}
+
+	return rc;
+}
+
+static int w8001_open(struct input_dev *dev)
+{
+	struct w8001 *w8001 = input_get_drvdata(dev);
+
+	return w8001_command(w8001, W8001_CMD_START, false);
+}
+
+static void w8001_close(struct input_dev *dev)
+{
+	struct w8001 *w8001 = input_get_drvdata(dev);
+
+	w8001_command(w8001, W8001_CMD_STOP, false);
+}
+
+static int w8001_setup(struct w8001 *w8001)
+{
+	struct input_dev *dev = w8001->dev;
+	struct w8001_coord coord;
+	struct w8001_touch_query touch;
+	int error;
+
+	error = w8001_command(w8001, W8001_CMD_STOP, false);
+	if (error)
+		return error;
+
+	msleep(250);	/* wait 250ms before querying the device */
+
+	dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+	strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name));
+
+	__set_bit(INPUT_PROP_DIRECT, dev->propbit);
+
+	/* penabled? */
+	error = w8001_command(w8001, W8001_CMD_QUERY, true);
+	if (!error) {
+		__set_bit(BTN_TOUCH, dev->keybit);
+		__set_bit(BTN_TOOL_PEN, dev->keybit);
+		__set_bit(BTN_TOOL_RUBBER, dev->keybit);
+		__set_bit(BTN_STYLUS, dev->keybit);
+		__set_bit(BTN_STYLUS2, dev->keybit);
+
+		parse_pen_data(w8001->response, &coord);
+		w8001->max_pen_x = coord.x;
+		w8001->max_pen_y = coord.y;
+
+		input_set_abs_params(dev, ABS_X, 0, coord.x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, coord.y, 0, 0);
+		input_abs_set_res(dev, ABS_X, W8001_PEN_RESOLUTION);
+		input_abs_set_res(dev, ABS_Y, W8001_PEN_RESOLUTION);
+		input_set_abs_params(dev, ABS_PRESSURE, 0, coord.pen_pressure, 0, 0);
+		if (coord.tilt_x && coord.tilt_y) {
+			input_set_abs_params(dev, ABS_TILT_X, 0, coord.tilt_x, 0, 0);
+			input_set_abs_params(dev, ABS_TILT_Y, 0, coord.tilt_y, 0, 0);
+		}
+		w8001->id = 0x90;
+		strlcat(w8001->name, " Penabled", sizeof(w8001->name));
+	}
+
+	/* Touch enabled? */
+	error = w8001_command(w8001, W8001_CMD_TOUCHQUERY, true);
+
+	/*
+	 * Some non-touch devices may reply to the touch query. But their
+	 * second byte is empty, which indicates touch is not supported.
+	 */
+	if (!error && w8001->response[1]) {
+		__set_bit(BTN_TOUCH, dev->keybit);
+		__set_bit(BTN_TOOL_FINGER, dev->keybit);
+
+		parse_touchquery(w8001->response, &touch);
+		w8001->max_touch_x = touch.x;
+		w8001->max_touch_y = touch.y;
+
+		if (w8001->max_pen_x && w8001->max_pen_y) {
+			/* if pen is supported scale to pen maximum */
+			touch.x = w8001->max_pen_x;
+			touch.y = w8001->max_pen_y;
+			touch.panel_res = W8001_PEN_RESOLUTION;
+		}
+
+		input_set_abs_params(dev, ABS_X, 0, touch.x, 0, 0);
+		input_set_abs_params(dev, ABS_Y, 0, touch.y, 0, 0);
+		input_abs_set_res(dev, ABS_X, touch.panel_res);
+		input_abs_set_res(dev, ABS_Y, touch.panel_res);
+
+		switch (touch.sensor_id) {
+		case 0:
+		case 2:
+			w8001->pktlen = W8001_PKTLEN_TOUCH93;
+			w8001->id = 0x93;
+			strlcat(w8001->name, " 1FG", sizeof(w8001->name));
+			break;
+
+		case 1:
+		case 3:
+		case 4:
+			w8001->pktlen = W8001_PKTLEN_TOUCH9A;
+			strlcat(w8001->name, " 1FG", sizeof(w8001->name));
+			w8001->id = 0x9a;
+			break;
+
+		case 5:
+			w8001->pktlen = W8001_PKTLEN_TOUCH2FG;
+
+			input_mt_init_slots(dev, 2, 0);
+			input_set_abs_params(dev, ABS_MT_POSITION_X,
+						0, touch.x, 0, 0);
+			input_set_abs_params(dev, ABS_MT_POSITION_Y,
+						0, touch.y, 0, 0);
+			input_set_abs_params(dev, ABS_MT_TOOL_TYPE,
+						0, MT_TOOL_MAX, 0, 0);
+
+			strlcat(w8001->name, " 2FG", sizeof(w8001->name));
+			if (w8001->max_pen_x && w8001->max_pen_y)
+				w8001->id = 0xE3;
+			else
+				w8001->id = 0xE2;
+			break;
+		}
+	}
+
+	strlcat(w8001->name, " Touchscreen", sizeof(w8001->name));
+
+	return 0;
+}
+
+/*
+ * w8001_disconnect() is the opposite of w8001_connect()
+ */
+
+static void w8001_disconnect(struct serio *serio)
+{
+	struct w8001 *w8001 = serio_get_drvdata(serio);
+
+	serio_close(serio);
+
+	input_unregister_device(w8001->dev);
+	kfree(w8001);
+
+	serio_set_drvdata(serio, NULL);
+}
+
+/*
+ * w8001_connect() is the routine that is called when someone adds a
+ * new serio device that supports the w8001 protocol and registers it as
+ * an input device.
+ */
+
+static int w8001_connect(struct serio *serio, struct serio_driver *drv)
+{
+	struct w8001 *w8001;
+	struct input_dev *input_dev;
+	int err;
+
+	w8001 = kzalloc(sizeof(struct w8001), GFP_KERNEL);
+	input_dev = input_allocate_device();
+	if (!w8001 || !input_dev) {
+		err = -ENOMEM;
+		goto fail1;
+	}
+
+	w8001->serio = serio;
+	w8001->dev = input_dev;
+	init_completion(&w8001->cmd_done);
+	snprintf(w8001->phys, sizeof(w8001->phys), "%s/input0", serio->phys);
+
+	serio_set_drvdata(serio, w8001);
+	err = serio_open(serio, drv);
+	if (err)
+		goto fail2;
+
+	err = w8001_setup(w8001);
+	if (err)
+		goto fail3;
+
+	input_dev->name = w8001->name;
+	input_dev->phys = w8001->phys;
+	input_dev->id.product = w8001->id;
+	input_dev->id.bustype = BUS_RS232;
+	input_dev->id.vendor = 0x056a;
+	input_dev->id.version = 0x0100;
+	input_dev->dev.parent = &serio->dev;
+
+	input_dev->open = w8001_open;
+	input_dev->close = w8001_close;
+
+	input_set_drvdata(input_dev, w8001);
+
+	err = input_register_device(w8001->dev);
+	if (err)
+		goto fail3;
+
+	return 0;
+
+fail3:
+	serio_close(serio);
+fail2:
+	serio_set_drvdata(serio, NULL);
+fail1:
+	input_free_device(input_dev);
+	kfree(w8001);
+	return err;
+}
+
+static struct serio_device_id w8001_serio_ids[] = {
+	{
+		.type	= SERIO_RS232,
+		.proto	= SERIO_W8001,
+		.id	= SERIO_ANY,
+		.extra	= SERIO_ANY,
+	},
+	{ 0 }
+};
+
+MODULE_DEVICE_TABLE(serio, w8001_serio_ids);
+
+static struct serio_driver w8001_drv = {
+	.driver		= {
+		.name	= "w8001",
+	},
+	.description	= DRIVER_DESC,
+	.id_table	= w8001_serio_ids,
+	.interrupt	= w8001_interrupt,
+	.connect	= w8001_connect,
+	.disconnect	= w8001_disconnect,
+};
+
+module_serio_driver(w8001_drv);
diff --git a/drivers/input/touchscreen/wdt87xx_i2c.c b/drivers/input/touchscreen/wdt87xx_i2c.c
new file mode 100644
index 0000000..515c20a
--- /dev/null
+++ b/drivers/input/touchscreen/wdt87xx_i2c.c
@@ -0,0 +1,1194 @@
+/*
+ * Weida HiTech WDT87xx TouchScreen I2C driver
+ *
+ * Copyright (c) 2015  Weida Hi-Tech Co., Ltd.
+ * HN Chen <hn.chen@weidahitech.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ */
+
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/firmware.h>
+#include <linux/input/mt.h>
+#include <linux/acpi.h>
+#include <asm/unaligned.h>
+
+#define WDT87XX_NAME		"wdt87xx_i2c"
+#define WDT87XX_DRV_VER		"0.9.7"
+#define WDT87XX_FW_NAME		"wdt87xx_fw.bin"
+#define WDT87XX_CFG_NAME	"wdt87xx_cfg.bin"
+
+#define MODE_ACTIVE			0x01
+#define MODE_READY			0x02
+#define MODE_IDLE			0x03
+#define MODE_SLEEP			0x04
+#define MODE_STOP			0xFF
+
+#define WDT_MAX_FINGER			10
+#define WDT_RAW_BUF_COUNT		54
+#define WDT_V1_RAW_BUF_COUNT		74
+#define WDT_FIRMWARE_ID			0xa9e368f5
+
+#define PG_SIZE				0x1000
+#define MAX_RETRIES			3
+
+#define MAX_UNIT_AXIS			0x7FFF
+
+#define PKT_READ_SIZE			72
+#define PKT_WRITE_SIZE			80
+
+/* the finger definition of the report event */
+#define FINGER_EV_OFFSET_ID		0
+#define FINGER_EV_OFFSET_X		1
+#define FINGER_EV_OFFSET_Y		3
+#define FINGER_EV_SIZE			5
+
+#define FINGER_EV_V1_OFFSET_ID		0
+#define FINGER_EV_V1_OFFSET_W		1
+#define FINGER_EV_V1_OFFSET_P		2
+#define FINGER_EV_V1_OFFSET_X		3
+#define FINGER_EV_V1_OFFSET_Y		5
+#define FINGER_EV_V1_SIZE		7
+
+/* The definition of a report packet */
+#define TOUCH_PK_OFFSET_REPORT_ID	0
+#define TOUCH_PK_OFFSET_EVENT		1
+#define TOUCH_PK_OFFSET_SCAN_TIME	51
+#define TOUCH_PK_OFFSET_FNGR_NUM	53
+
+#define TOUCH_PK_V1_OFFSET_REPORT_ID	0
+#define TOUCH_PK_V1_OFFSET_EVENT	1
+#define TOUCH_PK_V1_OFFSET_SCAN_TIME	71
+#define TOUCH_PK_V1_OFFSET_FNGR_NUM	73
+
+/* The definition of the controller parameters */
+#define CTL_PARAM_OFFSET_FW_ID		0
+#define CTL_PARAM_OFFSET_PLAT_ID	2
+#define CTL_PARAM_OFFSET_XMLS_ID1	4
+#define CTL_PARAM_OFFSET_XMLS_ID2	6
+#define CTL_PARAM_OFFSET_PHY_CH_X	8
+#define CTL_PARAM_OFFSET_PHY_CH_Y	10
+#define CTL_PARAM_OFFSET_PHY_X0		12
+#define CTL_PARAM_OFFSET_PHY_X1		14
+#define CTL_PARAM_OFFSET_PHY_Y0		16
+#define CTL_PARAM_OFFSET_PHY_Y1		18
+#define CTL_PARAM_OFFSET_PHY_W		22
+#define CTL_PARAM_OFFSET_PHY_H		24
+#define CTL_PARAM_OFFSET_FACTOR		32
+
+/* The definition of the device descriptor */
+#define WDT_GD_DEVICE			1
+#define DEV_DESC_OFFSET_VID		8
+#define DEV_DESC_OFFSET_PID		10
+
+/* Communication commands */
+#define PACKET_SIZE			56
+#define VND_REQ_READ			0x06
+#define VND_READ_DATA			0x07
+#define VND_REQ_WRITE			0x08
+
+#define VND_CMD_START			0x00
+#define VND_CMD_STOP			0x01
+#define VND_CMD_RESET			0x09
+
+#define VND_CMD_ERASE			0x1A
+
+#define VND_GET_CHECKSUM		0x66
+
+#define VND_SET_DATA			0x83
+#define VND_SET_COMMAND_DATA		0x84
+#define VND_SET_CHECKSUM_CALC		0x86
+#define VND_SET_CHECKSUM_LENGTH		0x87
+
+#define VND_CMD_SFLCK			0xFC
+#define VND_CMD_SFUNL			0xFD
+
+#define CMD_SFLCK_KEY			0xC39B
+#define CMD_SFUNL_KEY			0x95DA
+
+#define STRIDX_PLATFORM_ID		0x80
+#define STRIDX_PARAMETERS		0x81
+
+#define CMD_BUF_SIZE			8
+#define PKT_BUF_SIZE			64
+
+/* The definition of the command packet */
+#define CMD_REPORT_ID_OFFSET		0x0
+#define CMD_TYPE_OFFSET			0x1
+#define CMD_INDEX_OFFSET		0x2
+#define CMD_KEY_OFFSET			0x3
+#define CMD_LENGTH_OFFSET		0x4
+#define CMD_DATA_OFFSET			0x8
+
+/* The definition of firmware chunk tags */
+#define FOURCC_ID_RIFF			0x46464952
+#define FOURCC_ID_WHIF			0x46494857
+#define FOURCC_ID_FRMT			0x544D5246
+#define FOURCC_ID_FRWR			0x52575246
+#define FOURCC_ID_CNFG			0x47464E43
+
+#define CHUNK_ID_FRMT			FOURCC_ID_FRMT
+#define CHUNK_ID_FRWR			FOURCC_ID_FRWR
+#define CHUNK_ID_CNFG			FOURCC_ID_CNFG
+
+#define FW_FOURCC1_OFFSET		0
+#define FW_SIZE_OFFSET			4
+#define FW_FOURCC2_OFFSET		8
+#define FW_PAYLOAD_OFFSET		40
+
+#define FW_CHUNK_ID_OFFSET		0
+#define FW_CHUNK_SIZE_OFFSET		4
+#define FW_CHUNK_TGT_START_OFFSET	8
+#define FW_CHUNK_PAYLOAD_LEN_OFFSET	12
+#define FW_CHUNK_SRC_START_OFFSET	16
+#define FW_CHUNK_VERSION_OFFSET		20
+#define FW_CHUNK_ATTR_OFFSET		24
+#define FW_CHUNK_PAYLOAD_OFFSET		32
+
+/* Controller requires minimum 300us between commands */
+#define WDT_COMMAND_DELAY_MS		2
+#define WDT_FLASH_WRITE_DELAY_MS	4
+#define WDT_FW_RESET_TIME		2500
+
+struct wdt87xx_sys_param {
+	u16	fw_id;
+	u16	plat_id;
+	u16	xmls_id1;
+	u16	xmls_id2;
+	u16	phy_ch_x;
+	u16	phy_ch_y;
+	u16	phy_w;
+	u16	phy_h;
+	u16	scaling_factor;
+	u32	max_x;
+	u32	max_y;
+	u16	vendor_id;
+	u16	product_id;
+};
+
+struct wdt87xx_data {
+	struct i2c_client		*client;
+	struct input_dev		*input;
+	/* Mutex for fw update to prevent concurrent access */
+	struct mutex			fw_mutex;
+	struct wdt87xx_sys_param	param;
+	u8				phys[32];
+};
+
+static int wdt87xx_i2c_xfer(struct i2c_client *client,
+			    void *txdata, size_t txlen,
+			    void *rxdata, size_t rxlen)
+{
+	struct i2c_msg msgs[] = {
+		{
+			.addr	= client->addr,
+			.flags	= 0,
+			.len	= txlen,
+			.buf	= txdata,
+		},
+		{
+			.addr	= client->addr,
+			.flags	= I2C_M_RD,
+			.len	= rxlen,
+			.buf	= rxdata,
+		},
+	};
+	int error;
+	int ret;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret != ARRAY_SIZE(msgs)) {
+		error = ret < 0 ? ret : -EIO;
+		dev_err(&client->dev, "%s: i2c transfer failed: %d\n",
+			__func__, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int wdt87xx_get_desc(struct i2c_client *client, u8 desc_idx,
+			    u8 *buf, size_t len)
+{
+	u8 tx_buf[] = { 0x22, 0x00, 0x10, 0x0E, 0x23, 0x00 };
+	int error;
+
+	tx_buf[2] |= desc_idx & 0xF;
+
+	error = wdt87xx_i2c_xfer(client, tx_buf, sizeof(tx_buf),
+				 buf, len);
+	if (error) {
+		dev_err(&client->dev, "get desc failed: %d\n", error);
+		return error;
+	}
+
+	if (buf[0] != len) {
+		dev_err(&client->dev, "unexpected response to get desc: %d\n",
+			buf[0]);
+		return -EINVAL;
+	}
+
+	mdelay(WDT_COMMAND_DELAY_MS);
+
+	return 0;
+}
+
+static int wdt87xx_get_string(struct i2c_client *client, u8 str_idx,
+			      u8 *buf, size_t len)
+{
+	u8 tx_buf[] = { 0x22, 0x00, 0x13, 0x0E, str_idx, 0x23, 0x00 };
+	u8 rx_buf[PKT_WRITE_SIZE];
+	size_t rx_len = len + 2;
+	int error;
+
+	if (rx_len > sizeof(rx_buf))
+		return -EINVAL;
+
+	error = wdt87xx_i2c_xfer(client, tx_buf, sizeof(tx_buf),
+				 rx_buf, rx_len);
+	if (error) {
+		dev_err(&client->dev, "get string failed: %d\n", error);
+		return error;
+	}
+
+	if (rx_buf[1] != 0x03) {
+		dev_err(&client->dev, "unexpected response to get string: %d\n",
+			rx_buf[1]);
+		return -EINVAL;
+	}
+
+	rx_len = min_t(size_t, len, rx_buf[0]);
+	memcpy(buf, &rx_buf[2], rx_len);
+
+	mdelay(WDT_COMMAND_DELAY_MS);
+
+	return 0;
+}
+
+static int wdt87xx_get_feature(struct i2c_client *client,
+			       u8 *buf, size_t buf_size)
+{
+	u8 tx_buf[8];
+	u8 rx_buf[PKT_WRITE_SIZE];
+	size_t tx_len = 0;
+	size_t rx_len = buf_size + 2;
+	int error;
+
+	if (rx_len > sizeof(rx_buf))
+		return -EINVAL;
+
+	/* Get feature command packet */
+	tx_buf[tx_len++] = 0x22;
+	tx_buf[tx_len++] = 0x00;
+	if (buf[CMD_REPORT_ID_OFFSET] > 0xF) {
+		tx_buf[tx_len++] = 0x30;
+		tx_buf[tx_len++] = 0x02;
+		tx_buf[tx_len++] = buf[CMD_REPORT_ID_OFFSET];
+	} else {
+		tx_buf[tx_len++] = 0x30 | buf[CMD_REPORT_ID_OFFSET];
+		tx_buf[tx_len++] = 0x02;
+	}
+	tx_buf[tx_len++] = 0x23;
+	tx_buf[tx_len++] = 0x00;
+
+	error = wdt87xx_i2c_xfer(client, tx_buf, tx_len, rx_buf, rx_len);
+	if (error) {
+		dev_err(&client->dev, "get feature failed: %d\n", error);
+		return error;
+	}
+
+	rx_len = min_t(size_t, buf_size, get_unaligned_le16(rx_buf));
+	memcpy(buf, &rx_buf[2], rx_len);
+
+	mdelay(WDT_COMMAND_DELAY_MS);
+
+	return 0;
+}
+
+static int wdt87xx_set_feature(struct i2c_client *client,
+			       const u8 *buf, size_t buf_size)
+{
+	u8 tx_buf[PKT_WRITE_SIZE];
+	int tx_len = 0;
+	int error;
+
+	/* Set feature command packet */
+	tx_buf[tx_len++] = 0x22;
+	tx_buf[tx_len++] = 0x00;
+	if (buf[CMD_REPORT_ID_OFFSET] > 0xF) {
+		tx_buf[tx_len++] = 0x30;
+		tx_buf[tx_len++] = 0x03;
+		tx_buf[tx_len++] = buf[CMD_REPORT_ID_OFFSET];
+	} else {
+		tx_buf[tx_len++] = 0x30 | buf[CMD_REPORT_ID_OFFSET];
+		tx_buf[tx_len++] = 0x03;
+	}
+	tx_buf[tx_len++] = 0x23;
+	tx_buf[tx_len++] = 0x00;
+	tx_buf[tx_len++] = (buf_size & 0xFF);
+	tx_buf[tx_len++] = ((buf_size & 0xFF00) >> 8);
+
+	if (tx_len + buf_size > sizeof(tx_buf))
+		return -EINVAL;
+
+	memcpy(&tx_buf[tx_len], buf, buf_size);
+	tx_len += buf_size;
+
+	error = i2c_master_send(client, tx_buf, tx_len);
+	if (error < 0) {
+		dev_err(&client->dev, "set feature failed: %d\n", error);
+		return error;
+	}
+
+	mdelay(WDT_COMMAND_DELAY_MS);
+
+	return 0;
+}
+
+static int wdt87xx_send_command(struct i2c_client *client, int cmd, int value)
+{
+	u8 cmd_buf[CMD_BUF_SIZE];
+
+	/* Set the command packet */
+	cmd_buf[CMD_REPORT_ID_OFFSET] = VND_REQ_WRITE;
+	cmd_buf[CMD_TYPE_OFFSET] = VND_SET_COMMAND_DATA;
+	put_unaligned_le16((u16)cmd, &cmd_buf[CMD_INDEX_OFFSET]);
+
+	switch (cmd) {
+	case VND_CMD_START:
+	case VND_CMD_STOP:
+	case VND_CMD_RESET:
+		/* Mode selector */
+		put_unaligned_le32((value & 0xFF), &cmd_buf[CMD_LENGTH_OFFSET]);
+		break;
+
+	case VND_CMD_SFLCK:
+		put_unaligned_le16(CMD_SFLCK_KEY, &cmd_buf[CMD_KEY_OFFSET]);
+		break;
+
+	case VND_CMD_SFUNL:
+		put_unaligned_le16(CMD_SFUNL_KEY, &cmd_buf[CMD_KEY_OFFSET]);
+		break;
+
+	case VND_CMD_ERASE:
+	case VND_SET_CHECKSUM_CALC:
+	case VND_SET_CHECKSUM_LENGTH:
+		put_unaligned_le32(value, &cmd_buf[CMD_KEY_OFFSET]);
+		break;
+
+	default:
+		cmd_buf[CMD_REPORT_ID_OFFSET] = 0;
+		dev_err(&client->dev, "Invalid command: %d\n", cmd);
+		return -EINVAL;
+	}
+
+	return wdt87xx_set_feature(client, cmd_buf, sizeof(cmd_buf));
+}
+
+static int wdt87xx_sw_reset(struct i2c_client *client)
+{
+	int error;
+
+	dev_dbg(&client->dev, "resetting device now\n");
+
+	error = wdt87xx_send_command(client, VND_CMD_RESET, 0);
+	if (error) {
+		dev_err(&client->dev, "reset failed\n");
+		return error;
+	}
+
+	/* Wait the device to be ready */
+	msleep(WDT_FW_RESET_TIME);
+
+	return 0;
+}
+
+static const void *wdt87xx_get_fw_chunk(const struct firmware *fw, u32 id)
+{
+	size_t pos = FW_PAYLOAD_OFFSET;
+	u32 chunk_id, chunk_size;
+
+	while (pos < fw->size) {
+		chunk_id = get_unaligned_le32(fw->data +
+					      pos + FW_CHUNK_ID_OFFSET);
+		if (chunk_id == id)
+			return fw->data + pos;
+
+		chunk_size = get_unaligned_le32(fw->data +
+						pos + FW_CHUNK_SIZE_OFFSET);
+		pos += chunk_size + 2 * sizeof(u32); /* chunk ID + size */
+	}
+
+	return NULL;
+}
+
+static int wdt87xx_get_sysparam(struct i2c_client *client,
+				struct wdt87xx_sys_param *param)
+{
+	u8 buf[PKT_READ_SIZE];
+	int error;
+
+	error = wdt87xx_get_desc(client, WDT_GD_DEVICE, buf, 18);
+	if (error) {
+		dev_err(&client->dev, "failed to get device desc\n");
+		return error;
+	}
+
+	param->vendor_id = get_unaligned_le16(buf + DEV_DESC_OFFSET_VID);
+	param->product_id = get_unaligned_le16(buf + DEV_DESC_OFFSET_PID);
+
+	error = wdt87xx_get_string(client, STRIDX_PARAMETERS, buf, 34);
+	if (error) {
+		dev_err(&client->dev, "failed to get parameters\n");
+		return error;
+	}
+
+	param->xmls_id1 = get_unaligned_le16(buf + CTL_PARAM_OFFSET_XMLS_ID1);
+	param->xmls_id2 = get_unaligned_le16(buf + CTL_PARAM_OFFSET_XMLS_ID2);
+	param->phy_ch_x = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_CH_X);
+	param->phy_ch_y = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_CH_Y);
+	param->phy_w = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_W) / 10;
+	param->phy_h = get_unaligned_le16(buf + CTL_PARAM_OFFSET_PHY_H) / 10;
+
+	/* Get the scaling factor of pixel to logical coordinate */
+	param->scaling_factor =
+			get_unaligned_le16(buf + CTL_PARAM_OFFSET_FACTOR);
+
+	param->max_x = MAX_UNIT_AXIS;
+	param->max_y = DIV_ROUND_CLOSEST(MAX_UNIT_AXIS * param->phy_h,
+					 param->phy_w);
+
+	error = wdt87xx_get_string(client, STRIDX_PLATFORM_ID, buf, 8);
+	if (error) {
+		dev_err(&client->dev, "failed to get platform id\n");
+		return error;
+	}
+
+	param->plat_id = buf[1];
+
+	buf[0] = 0xf2;
+	error = wdt87xx_get_feature(client, buf, 16);
+	if (error) {
+		dev_err(&client->dev, "failed to get firmware id\n");
+		return error;
+	}
+
+	if (buf[0] != 0xf2) {
+		dev_err(&client->dev, "wrong id of fw response: 0x%x\n",
+			buf[0]);
+		return -EINVAL;
+	}
+
+	param->fw_id = get_unaligned_le16(&buf[1]);
+
+	dev_info(&client->dev,
+		 "fw_id: 0x%x, plat_id: 0x%x, xml_id1: %04x, xml_id2: %04x\n",
+		 param->fw_id, param->plat_id,
+		 param->xmls_id1, param->xmls_id2);
+
+	return 0;
+}
+
+static int wdt87xx_validate_firmware(struct wdt87xx_data *wdt,
+				     const struct firmware *fw)
+{
+	const void *fw_chunk;
+	u32 data1, data2;
+	u32 size;
+	u8 fw_chip_id;
+	u8 chip_id;
+
+	data1 = get_unaligned_le32(fw->data + FW_FOURCC1_OFFSET);
+	data2 = get_unaligned_le32(fw->data + FW_FOURCC2_OFFSET);
+	if (data1 != FOURCC_ID_RIFF || data2 != FOURCC_ID_WHIF) {
+		dev_err(&wdt->client->dev, "check fw tag failed\n");
+		return -EINVAL;
+	}
+
+	size = get_unaligned_le32(fw->data + FW_SIZE_OFFSET);
+	if (size != fw->size) {
+		dev_err(&wdt->client->dev,
+			"fw size mismatch: expected %d, actual %zu\n",
+			size, fw->size);
+		return -EINVAL;
+	}
+
+	/*
+	 * Get the chip_id from the firmware. Make sure that it is the
+	 * right controller to do the firmware and config update.
+	 */
+	fw_chunk = wdt87xx_get_fw_chunk(fw, CHUNK_ID_FRWR);
+	if (!fw_chunk) {
+		dev_err(&wdt->client->dev,
+			"unable to locate firmware chunk\n");
+		return -EINVAL;
+	}
+
+	fw_chip_id = (get_unaligned_le32(fw_chunk +
+					 FW_CHUNK_VERSION_OFFSET) >> 12) & 0xF;
+	chip_id = (wdt->param.fw_id >> 12) & 0xF;
+
+	if (fw_chip_id != chip_id) {
+		dev_err(&wdt->client->dev,
+			"fw version mismatch: fw %d vs. chip %d\n",
+			fw_chip_id, chip_id);
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static int wdt87xx_validate_fw_chunk(const void *data, int id)
+{
+	if (id == CHUNK_ID_FRWR) {
+		u32 fw_id;
+
+		fw_id = get_unaligned_le32(data + FW_CHUNK_PAYLOAD_OFFSET);
+		if (fw_id != WDT_FIRMWARE_ID)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int wdt87xx_write_data(struct i2c_client *client, const char *data,
+			      u32 address, int length)
+{
+	u16 packet_size;
+	int count = 0;
+	int error;
+	u8 pkt_buf[PKT_BUF_SIZE];
+
+	/* Address and length should be 4 bytes aligned */
+	if ((address & 0x3) != 0 || (length & 0x3) != 0) {
+		dev_err(&client->dev,
+			"addr & len must be 4 bytes aligned %x, %x\n",
+			address, length);
+		return -EINVAL;
+	}
+
+	while (length) {
+		packet_size = min(length, PACKET_SIZE);
+
+		pkt_buf[CMD_REPORT_ID_OFFSET] = VND_REQ_WRITE;
+		pkt_buf[CMD_TYPE_OFFSET] = VND_SET_DATA;
+		put_unaligned_le16(packet_size, &pkt_buf[CMD_INDEX_OFFSET]);
+		put_unaligned_le32(address, &pkt_buf[CMD_LENGTH_OFFSET]);
+		memcpy(&pkt_buf[CMD_DATA_OFFSET], data, packet_size);
+
+		error = wdt87xx_set_feature(client, pkt_buf, sizeof(pkt_buf));
+		if (error)
+			return error;
+
+		length -= packet_size;
+		data += packet_size;
+		address += packet_size;
+
+		/* Wait for the controller to finish the write */
+		mdelay(WDT_FLASH_WRITE_DELAY_MS);
+
+		if ((++count % 32) == 0) {
+			/* Delay for fw to clear watch dog */
+			msleep(20);
+		}
+	}
+
+	return 0;
+}
+
+static u16 misr(u16 cur_value, u8 new_value)
+{
+	u32 a, b;
+	u32 bit0;
+	u32 y;
+
+	a = cur_value;
+	b = new_value;
+	bit0 = a ^ (b & 1);
+	bit0 ^= a >> 1;
+	bit0 ^= a >> 2;
+	bit0 ^= a >> 4;
+	bit0 ^= a >> 5;
+	bit0 ^= a >> 7;
+	bit0 ^= a >> 11;
+	bit0 ^= a >> 15;
+	y = (a << 1) ^ b;
+	y = (y & ~1) | (bit0 & 1);
+
+	return (u16)y;
+}
+
+static u16 wdt87xx_calculate_checksum(const u8 *data, size_t length)
+{
+	u16 checksum = 0;
+	size_t i;
+
+	for (i = 0; i < length; i++)
+		checksum = misr(checksum, data[i]);
+
+	return checksum;
+}
+
+static int wdt87xx_get_checksum(struct i2c_client *client, u16 *checksum,
+				u32 address, int length)
+{
+	int error;
+	int time_delay;
+	u8 pkt_buf[PKT_BUF_SIZE];
+	u8 cmd_buf[CMD_BUF_SIZE];
+
+	error = wdt87xx_send_command(client, VND_SET_CHECKSUM_LENGTH, length);
+	if (error) {
+		dev_err(&client->dev, "failed to set checksum length\n");
+		return error;
+	}
+
+	error = wdt87xx_send_command(client, VND_SET_CHECKSUM_CALC, address);
+	if (error) {
+		dev_err(&client->dev, "failed to set checksum address\n");
+		return error;
+	}
+
+	/* Wait the operation to complete */
+	time_delay = DIV_ROUND_UP(length, 1024);
+	msleep(time_delay * 30);
+
+	memset(cmd_buf, 0, sizeof(cmd_buf));
+	cmd_buf[CMD_REPORT_ID_OFFSET] = VND_REQ_READ;
+	cmd_buf[CMD_TYPE_OFFSET] = VND_GET_CHECKSUM;
+	error = wdt87xx_set_feature(client, cmd_buf, sizeof(cmd_buf));
+	if (error) {
+		dev_err(&client->dev, "failed to request checksum\n");
+		return error;
+	}
+
+	memset(pkt_buf, 0, sizeof(pkt_buf));
+	pkt_buf[CMD_REPORT_ID_OFFSET] = VND_READ_DATA;
+	error = wdt87xx_get_feature(client, pkt_buf, sizeof(pkt_buf));
+	if (error) {
+		dev_err(&client->dev, "failed to read checksum\n");
+		return error;
+	}
+
+	*checksum = get_unaligned_le16(&pkt_buf[CMD_DATA_OFFSET]);
+	return 0;
+}
+
+static int wdt87xx_write_firmware(struct i2c_client *client, const void *chunk)
+{
+	u32 start_addr = get_unaligned_le32(chunk + FW_CHUNK_TGT_START_OFFSET);
+	u32 size = get_unaligned_le32(chunk + FW_CHUNK_PAYLOAD_LEN_OFFSET);
+	const void *data = chunk + FW_CHUNK_PAYLOAD_OFFSET;
+	int error;
+	int err1;
+	int page_size;
+	int retry = 0;
+	u16 device_checksum, firmware_checksum;
+
+	dev_dbg(&client->dev, "start 4k page program\n");
+
+	error = wdt87xx_send_command(client, VND_CMD_STOP, MODE_STOP);
+	if (error) {
+		dev_err(&client->dev, "stop report mode failed\n");
+		return error;
+	}
+
+	error = wdt87xx_send_command(client, VND_CMD_SFUNL, 0);
+	if (error) {
+		dev_err(&client->dev, "unlock failed\n");
+		goto out_enable_reporting;
+	}
+
+	mdelay(10);
+
+	while (size) {
+		dev_dbg(&client->dev, "%s: %x, %x\n", __func__,
+			start_addr, size);
+
+		page_size = min_t(u32, size, PG_SIZE);
+		size -= page_size;
+
+		for (retry = 0; retry < MAX_RETRIES; retry++) {
+			error = wdt87xx_send_command(client, VND_CMD_ERASE,
+						     start_addr);
+			if (error) {
+				dev_err(&client->dev,
+					"erase failed at %#08x\n", start_addr);
+				break;
+			}
+
+			msleep(50);
+
+			error = wdt87xx_write_data(client, data, start_addr,
+						   page_size);
+			if (error) {
+				dev_err(&client->dev,
+					"write failed at %#08x (%d bytes)\n",
+					start_addr, page_size);
+				break;
+			}
+
+			error = wdt87xx_get_checksum(client, &device_checksum,
+						     start_addr, page_size);
+			if (error) {
+				dev_err(&client->dev,
+					"failed to retrieve checksum for %#08x (len: %d)\n",
+					start_addr, page_size);
+				break;
+			}
+
+			firmware_checksum =
+				wdt87xx_calculate_checksum(data, page_size);
+
+			if (device_checksum == firmware_checksum)
+				break;
+
+			dev_err(&client->dev,
+				"checksum fail: %d vs %d, retry %d\n",
+				device_checksum, firmware_checksum, retry);
+		}
+
+		if (retry == MAX_RETRIES) {
+			dev_err(&client->dev, "page write failed\n");
+			error = -EIO;
+			goto out_lock_device;
+		}
+
+		start_addr = start_addr + page_size;
+		data = data + page_size;
+	}
+
+out_lock_device:
+	err1 = wdt87xx_send_command(client, VND_CMD_SFLCK, 0);
+	if (err1)
+		dev_err(&client->dev, "lock failed\n");
+
+	mdelay(10);
+
+out_enable_reporting:
+	err1 = wdt87xx_send_command(client, VND_CMD_START, 0);
+	if (err1)
+		dev_err(&client->dev, "start to report failed\n");
+
+	return error ? error : err1;
+}
+
+static int wdt87xx_load_chunk(struct i2c_client *client,
+			      const struct firmware *fw, u32 ck_id)
+{
+	const void *chunk;
+	int error;
+
+	chunk = wdt87xx_get_fw_chunk(fw, ck_id);
+	if (!chunk) {
+		dev_err(&client->dev, "unable to locate chunk (type %d)\n",
+			ck_id);
+		return -EINVAL;
+	}
+
+	error = wdt87xx_validate_fw_chunk(chunk, ck_id);
+	if (error) {
+		dev_err(&client->dev, "invalid chunk (type %d): %d\n",
+			ck_id, error);
+		return error;
+	}
+
+	error = wdt87xx_write_firmware(client, chunk);
+	if (error) {
+		dev_err(&client->dev,
+			"failed to write fw chunk (type %d): %d\n",
+			ck_id, error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int wdt87xx_do_update_firmware(struct i2c_client *client,
+				      const struct firmware *fw,
+				      unsigned int chunk_id)
+{
+	struct wdt87xx_data *wdt = i2c_get_clientdata(client);
+	int error;
+
+	error = wdt87xx_validate_firmware(wdt, fw);
+	if (error)
+		return error;
+
+	error = mutex_lock_interruptible(&wdt->fw_mutex);
+	if (error)
+		return error;
+
+	disable_irq(client->irq);
+
+	error = wdt87xx_load_chunk(client, fw, chunk_id);
+	if (error) {
+		dev_err(&client->dev,
+			"firmware load failed (type: %d): %d\n",
+			chunk_id, error);
+		goto out;
+	}
+
+	error = wdt87xx_sw_reset(client);
+	if (error) {
+		dev_err(&client->dev, "soft reset failed: %d\n", error);
+		goto out;
+	}
+
+	/* Refresh the parameters */
+	error = wdt87xx_get_sysparam(client, &wdt->param);
+	if (error)
+		dev_err(&client->dev,
+			"failed to refresh system paramaters: %d\n", error);
+out:
+	enable_irq(client->irq);
+	mutex_unlock(&wdt->fw_mutex);
+
+	return error ? error : 0;
+}
+
+static int wdt87xx_update_firmware(struct device *dev,
+				   const char *fw_name, unsigned int chunk_id)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	const struct firmware *fw;
+	int error;
+
+	error = request_firmware(&fw, fw_name, dev);
+	if (error) {
+		dev_err(&client->dev, "unable to retrieve firmware %s: %d\n",
+			fw_name, error);
+		return error;
+	}
+
+	error = wdt87xx_do_update_firmware(client, fw, chunk_id);
+
+	release_firmware(fw);
+
+	return error ? error : 0;
+}
+
+static ssize_t config_csum_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct wdt87xx_data *wdt = i2c_get_clientdata(client);
+	u32 cfg_csum;
+
+	cfg_csum = wdt->param.xmls_id1;
+	cfg_csum = (cfg_csum << 16) | wdt->param.xmls_id2;
+
+	return scnprintf(buf, PAGE_SIZE, "%x\n", cfg_csum);
+}
+
+static ssize_t fw_version_show(struct device *dev,
+			       struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct wdt87xx_data *wdt = i2c_get_clientdata(client);
+
+	return scnprintf(buf, PAGE_SIZE, "%x\n", wdt->param.fw_id);
+}
+
+static ssize_t plat_id_show(struct device *dev,
+			    struct device_attribute *attr, char *buf)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct wdt87xx_data *wdt = i2c_get_clientdata(client);
+
+	return scnprintf(buf, PAGE_SIZE, "%x\n", wdt->param.plat_id);
+}
+
+static ssize_t update_config_store(struct device *dev,
+				   struct device_attribute *attr,
+				   const char *buf, size_t count)
+{
+	int error;
+
+	error = wdt87xx_update_firmware(dev, WDT87XX_CFG_NAME, CHUNK_ID_CNFG);
+
+	return error ? error : count;
+}
+
+static ssize_t update_fw_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	int error;
+
+	error = wdt87xx_update_firmware(dev, WDT87XX_FW_NAME, CHUNK_ID_FRWR);
+
+	return error ? error : count;
+}
+
+static DEVICE_ATTR_RO(config_csum);
+static DEVICE_ATTR_RO(fw_version);
+static DEVICE_ATTR_RO(plat_id);
+static DEVICE_ATTR_WO(update_config);
+static DEVICE_ATTR_WO(update_fw);
+
+static struct attribute *wdt87xx_attrs[] = {
+	&dev_attr_config_csum.attr,
+	&dev_attr_fw_version.attr,
+	&dev_attr_plat_id.attr,
+	&dev_attr_update_config.attr,
+	&dev_attr_update_fw.attr,
+	NULL
+};
+
+static const struct attribute_group wdt87xx_attr_group = {
+	.attrs = wdt87xx_attrs,
+};
+
+static void wdt87xx_report_contact(struct input_dev *input,
+				   struct wdt87xx_sys_param *param,
+				   u8 *buf)
+{
+	int finger_id;
+	u32 x, y, w;
+	u8 p;
+
+	finger_id = (buf[FINGER_EV_V1_OFFSET_ID] >> 3) - 1;
+	if (finger_id < 0)
+		return;
+
+	/* Check if this is an active contact */
+	if (!(buf[FINGER_EV_V1_OFFSET_ID] & 0x1))
+		return;
+
+	w = buf[FINGER_EV_V1_OFFSET_W];
+	w *= param->scaling_factor;
+
+	p = buf[FINGER_EV_V1_OFFSET_P];
+
+	x = get_unaligned_le16(buf + FINGER_EV_V1_OFFSET_X);
+
+	y = get_unaligned_le16(buf + FINGER_EV_V1_OFFSET_Y);
+	y = DIV_ROUND_CLOSEST(y * param->phy_h, param->phy_w);
+
+	/* Refuse incorrect coordinates */
+	if (x > param->max_x || y > param->max_y)
+		return;
+
+	dev_dbg(input->dev.parent, "tip on (%d), x(%d), y(%d)\n",
+		finger_id, x, y);
+
+	input_mt_slot(input, finger_id);
+	input_mt_report_slot_state(input, MT_TOOL_FINGER, 1);
+	input_report_abs(input, ABS_MT_TOUCH_MAJOR, w);
+	input_report_abs(input, ABS_MT_PRESSURE, p);
+	input_report_abs(input, ABS_MT_POSITION_X, x);
+	input_report_abs(input, ABS_MT_POSITION_Y, y);
+}
+
+static irqreturn_t wdt87xx_ts_interrupt(int irq, void *dev_id)
+{
+	struct wdt87xx_data *wdt = dev_id;
+	struct i2c_client *client = wdt->client;
+	int i, fingers;
+	int error;
+	u8 raw_buf[WDT_V1_RAW_BUF_COUNT] = {0};
+
+	error = i2c_master_recv(client, raw_buf, WDT_V1_RAW_BUF_COUNT);
+	if (error < 0) {
+		dev_err(&client->dev, "read v1 raw data failed: %d\n", error);
+		goto irq_exit;
+	}
+
+	fingers = raw_buf[TOUCH_PK_V1_OFFSET_FNGR_NUM];
+	if (!fingers)
+		goto irq_exit;
+
+	for (i = 0; i < WDT_MAX_FINGER; i++)
+		wdt87xx_report_contact(wdt->input,
+				       &wdt->param,
+				       &raw_buf[TOUCH_PK_V1_OFFSET_EVENT +
+						i * FINGER_EV_V1_SIZE]);
+
+	input_mt_sync_frame(wdt->input);
+	input_sync(wdt->input);
+
+irq_exit:
+	return IRQ_HANDLED;
+}
+
+static int wdt87xx_ts_create_input_device(struct wdt87xx_data *wdt)
+{
+	struct device *dev = &wdt->client->dev;
+	struct input_dev *input;
+	unsigned int res = DIV_ROUND_CLOSEST(MAX_UNIT_AXIS, wdt->param.phy_w);
+	int error;
+
+	input = devm_input_allocate_device(dev);
+	if (!input) {
+		dev_err(dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+	wdt->input = input;
+
+	input->name = "WDT87xx Touchscreen";
+	input->id.bustype = BUS_I2C;
+	input->id.vendor = wdt->param.vendor_id;
+	input->id.product = wdt->param.product_id;
+	input->phys = wdt->phys;
+
+	input_set_abs_params(input, ABS_MT_POSITION_X, 0,
+			     wdt->param.max_x, 0, 0);
+	input_set_abs_params(input, ABS_MT_POSITION_Y, 0,
+			     wdt->param.max_y, 0, 0);
+	input_abs_set_res(input, ABS_MT_POSITION_X, res);
+	input_abs_set_res(input, ABS_MT_POSITION_Y, res);
+
+	input_set_abs_params(input, ABS_MT_TOUCH_MAJOR,
+			     0, wdt->param.max_x, 0, 0);
+	input_set_abs_params(input, ABS_MT_PRESSURE, 0, 0xFF, 0, 0);
+
+	input_mt_init_slots(input, WDT_MAX_FINGER,
+			    INPUT_MT_DIRECT | INPUT_MT_DROP_UNUSED);
+
+	error = input_register_device(input);
+	if (error) {
+		dev_err(dev, "failed to register input device: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int wdt87xx_ts_probe(struct i2c_client *client,
+			    const struct i2c_device_id *id)
+{
+	struct wdt87xx_data *wdt;
+	int error;
+
+	dev_dbg(&client->dev, "adapter=%d, client irq: %d\n",
+		client->adapter->nr, client->irq);
+
+	/* Check if the I2C function is ok in this adaptor */
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C))
+		return -ENXIO;
+
+	wdt = devm_kzalloc(&client->dev, sizeof(*wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->client = client;
+	mutex_init(&wdt->fw_mutex);
+	i2c_set_clientdata(client, wdt);
+
+	snprintf(wdt->phys, sizeof(wdt->phys), "i2c-%u-%04x/input0",
+		 client->adapter->nr, client->addr);
+
+	error = wdt87xx_get_sysparam(client, &wdt->param);
+	if (error)
+		return error;
+
+	error = wdt87xx_ts_create_input_device(wdt);
+	if (error)
+		return error;
+
+	error = devm_request_threaded_irq(&client->dev, client->irq,
+					  NULL, wdt87xx_ts_interrupt,
+					  IRQF_ONESHOT,
+					  client->name, wdt);
+	if (error) {
+		dev_err(&client->dev, "request irq failed: %d\n", error);
+		return error;
+	}
+
+	error = sysfs_create_group(&client->dev.kobj, &wdt87xx_attr_group);
+	if (error) {
+		dev_err(&client->dev, "create sysfs failed: %d\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int wdt87xx_ts_remove(struct i2c_client *client)
+{
+	sysfs_remove_group(&client->dev.kobj, &wdt87xx_attr_group);
+
+	return 0;
+}
+
+static int __maybe_unused wdt87xx_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int error;
+
+	disable_irq(client->irq);
+
+	error = wdt87xx_send_command(client, VND_CMD_STOP, MODE_IDLE);
+	if (error) {
+		enable_irq(client->irq);
+		dev_err(&client->dev,
+			"failed to stop device when suspending: %d\n",
+			error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused wdt87xx_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	int error;
+
+	/*
+	 * The chip may have been reset while system is resuming,
+	 * give it some time to settle.
+	 */
+	mdelay(100);
+
+	error = wdt87xx_send_command(client, VND_CMD_START, 0);
+	if (error)
+		dev_err(&client->dev,
+			"failed to start device when resuming: %d\n",
+			error);
+
+	enable_irq(client->irq);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(wdt87xx_pm_ops, wdt87xx_suspend, wdt87xx_resume);
+
+static const struct i2c_device_id wdt87xx_dev_id[] = {
+	{ WDT87XX_NAME, 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, wdt87xx_dev_id);
+
+static const struct acpi_device_id wdt87xx_acpi_id[] = {
+	{ "WDHT0001", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(acpi, wdt87xx_acpi_id);
+
+static struct i2c_driver wdt87xx_driver = {
+	.probe		= wdt87xx_ts_probe,
+	.remove		= wdt87xx_ts_remove,
+	.id_table	= wdt87xx_dev_id,
+	.driver	= {
+		.name	= WDT87XX_NAME,
+		.pm     = &wdt87xx_pm_ops,
+		.acpi_match_table = ACPI_PTR(wdt87xx_acpi_id),
+	},
+};
+module_i2c_driver(wdt87xx_driver);
+
+MODULE_AUTHOR("HN Chen <hn.chen@weidahitech.com>");
+MODULE_DESCRIPTION("WeidaHiTech WDT87XX Touchscreen driver");
+MODULE_VERSION(WDT87XX_DRV_VER);
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c
new file mode 100644
index 0000000..1db0a14
--- /dev/null
+++ b/drivers/input/touchscreen/wm831x-ts.c
@@ -0,0 +1,405 @@
+/*
+ * Touchscreen driver for WM831x PMICs
+ *
+ * Copyright 2011 Wolfson Microelectronics plc.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/pm.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mfd/wm831x/core.h>
+#include <linux/mfd/wm831x/irq.h>
+#include <linux/mfd/wm831x/pdata.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+/*
+ * R16424 (0x4028) - Touch Control 1
+ */
+#define WM831X_TCH_ENA                          0x8000  /* TCH_ENA */
+#define WM831X_TCH_CVT_ENA                      0x4000  /* TCH_CVT_ENA */
+#define WM831X_TCH_SLPENA                       0x1000  /* TCH_SLPENA */
+#define WM831X_TCH_Z_ENA                        0x0400  /* TCH_Z_ENA */
+#define WM831X_TCH_Y_ENA                        0x0200  /* TCH_Y_ENA */
+#define WM831X_TCH_X_ENA                        0x0100  /* TCH_X_ENA */
+#define WM831X_TCH_DELAY_MASK                   0x00E0  /* TCH_DELAY - [7:5] */
+#define WM831X_TCH_DELAY_SHIFT                       5  /* TCH_DELAY - [7:5] */
+#define WM831X_TCH_DELAY_WIDTH                       3  /* TCH_DELAY - [7:5] */
+#define WM831X_TCH_RATE_MASK                    0x001F  /* TCH_RATE - [4:0] */
+#define WM831X_TCH_RATE_SHIFT                        0  /* TCH_RATE - [4:0] */
+#define WM831X_TCH_RATE_WIDTH                        5  /* TCH_RATE - [4:0] */
+
+/*
+ * R16425 (0x4029) - Touch Control 2
+ */
+#define WM831X_TCH_PD_WK                        0x2000  /* TCH_PD_WK */
+#define WM831X_TCH_5WIRE                        0x1000  /* TCH_5WIRE */
+#define WM831X_TCH_PDONLY                       0x0800  /* TCH_PDONLY */
+#define WM831X_TCH_ISEL                         0x0100  /* TCH_ISEL */
+#define WM831X_TCH_RPU_MASK                     0x000F  /* TCH_RPU - [3:0] */
+#define WM831X_TCH_RPU_SHIFT                         0  /* TCH_RPU - [3:0] */
+#define WM831X_TCH_RPU_WIDTH                         4  /* TCH_RPU - [3:0] */
+
+/*
+ * R16426-8 (0x402A-C) - Touch Data X/Y/X
+ */
+#define WM831X_TCH_PD                           0x8000  /* TCH_PD1 */
+#define WM831X_TCH_DATA_MASK                    0x0FFF  /* TCH_DATA - [11:0] */
+#define WM831X_TCH_DATA_SHIFT                        0  /* TCH_DATA - [11:0] */
+#define WM831X_TCH_DATA_WIDTH                       12  /* TCH_DATA - [11:0] */
+
+struct wm831x_ts {
+	struct input_dev *input_dev;
+	struct wm831x *wm831x;
+	unsigned int data_irq;
+	unsigned int pd_irq;
+	bool pressure;
+	bool pen_down;
+	struct work_struct pd_data_work;
+};
+
+static void wm831x_pd_data_work(struct work_struct *work)
+{
+	struct wm831x_ts *wm831x_ts =
+		container_of(work, struct wm831x_ts, pd_data_work);
+
+	if (wm831x_ts->pen_down) {
+		enable_irq(wm831x_ts->data_irq);
+		dev_dbg(wm831x_ts->wm831x->dev, "IRQ PD->DATA done\n");
+	} else {
+		enable_irq(wm831x_ts->pd_irq);
+		dev_dbg(wm831x_ts->wm831x->dev, "IRQ DATA->PD done\n");
+	}
+}
+
+static irqreturn_t wm831x_ts_data_irq(int irq, void *irq_data)
+{
+	struct wm831x_ts *wm831x_ts = irq_data;
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+	static int data_types[] = { ABS_X, ABS_Y, ABS_PRESSURE };
+	u16 data[3];
+	int count;
+	int i, ret;
+
+	if (wm831x_ts->pressure)
+		count = 3;
+	else
+		count = 2;
+
+	wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
+			WM831X_TCHDATA_EINT, WM831X_TCHDATA_EINT);
+
+	ret = wm831x_bulk_read(wm831x, WM831X_TOUCH_DATA_X, count,
+			       data);
+	if (ret != 0) {
+		dev_err(wm831x->dev, "Failed to read touch data: %d\n",
+			ret);
+		return IRQ_NONE;
+	}
+
+	/*
+	 * We get a pen down reading on every reading, report pen up if any
+	 * individual reading does so.
+	 */
+	wm831x_ts->pen_down = true;
+	for (i = 0; i < count; i++) {
+		if (!(data[i] & WM831X_TCH_PD)) {
+			wm831x_ts->pen_down = false;
+			continue;
+		}
+		input_report_abs(wm831x_ts->input_dev, data_types[i],
+				 data[i] & WM831X_TCH_DATA_MASK);
+	}
+
+	if (!wm831x_ts->pen_down) {
+		/* Switch from data to pen down */
+		dev_dbg(wm831x->dev, "IRQ DATA->PD\n");
+
+		disable_irq_nosync(wm831x_ts->data_irq);
+
+		/* Don't need data any more */
+		wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+				WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA |
+				WM831X_TCH_Z_ENA, 0);
+
+		/* Flush any final samples that arrived while reading */
+		wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
+				WM831X_TCHDATA_EINT, WM831X_TCHDATA_EINT);
+
+		wm831x_bulk_read(wm831x, WM831X_TOUCH_DATA_X, count, data);
+
+		if (wm831x_ts->pressure)
+			input_report_abs(wm831x_ts->input_dev,
+					 ABS_PRESSURE, 0);
+
+		input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 0);
+
+		schedule_work(&wm831x_ts->pd_data_work);
+	} else {
+		input_report_key(wm831x_ts->input_dev, BTN_TOUCH, 1);
+	}
+
+	input_sync(wm831x_ts->input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t wm831x_ts_pen_down_irq(int irq, void *irq_data)
+{
+	struct wm831x_ts *wm831x_ts = irq_data;
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+	int ena = 0;
+
+	if (wm831x_ts->pen_down)
+		return IRQ_HANDLED;
+
+	disable_irq_nosync(wm831x_ts->pd_irq);
+
+	/* Start collecting data */
+	if (wm831x_ts->pressure)
+		ena |= WM831X_TCH_Z_ENA;
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA,
+			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA | ena);
+
+	wm831x_set_bits(wm831x, WM831X_INTERRUPT_STATUS_1,
+			WM831X_TCHPD_EINT, WM831X_TCHPD_EINT);
+
+	wm831x_ts->pen_down = true;
+
+	/* Switch from pen down to data */
+	dev_dbg(wm831x->dev, "IRQ PD->DATA\n");
+	schedule_work(&wm831x_ts->pd_data_work);
+
+	return IRQ_HANDLED;
+}
+
+static int wm831x_ts_input_open(struct input_dev *idev)
+{
+	struct wm831x_ts *wm831x_ts = input_get_drvdata(idev);
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_ENA | WM831X_TCH_CVT_ENA |
+			WM831X_TCH_X_ENA | WM831X_TCH_Y_ENA |
+			WM831X_TCH_Z_ENA, WM831X_TCH_ENA);
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_CVT_ENA, WM831X_TCH_CVT_ENA);
+
+	return 0;
+}
+
+static void wm831x_ts_input_close(struct input_dev *idev)
+{
+	struct wm831x_ts *wm831x_ts = input_get_drvdata(idev);
+	struct wm831x *wm831x = wm831x_ts->wm831x;
+
+	/* Shut the controller down, disabling all other functionality too */
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_ENA | WM831X_TCH_X_ENA |
+			WM831X_TCH_Y_ENA | WM831X_TCH_Z_ENA, 0);
+
+	/* Make sure any pending IRQs are done, the above will prevent
+	 * new ones firing.
+	 */
+	synchronize_irq(wm831x_ts->data_irq);
+	synchronize_irq(wm831x_ts->pd_irq);
+
+	/* Make sure the IRQ completion work is quiesced */
+	flush_work(&wm831x_ts->pd_data_work);
+
+	/* If we ended up with the pen down then make sure we revert back
+	 * to pen detection state for the next time we start up.
+	 */
+	if (wm831x_ts->pen_down) {
+		disable_irq(wm831x_ts->data_irq);
+		enable_irq(wm831x_ts->pd_irq);
+		wm831x_ts->pen_down = false;
+	}
+}
+
+static int wm831x_ts_probe(struct platform_device *pdev)
+{
+	struct wm831x_ts *wm831x_ts;
+	struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
+	struct wm831x_pdata *core_pdata = dev_get_platdata(pdev->dev.parent);
+	struct wm831x_touch_pdata *pdata = NULL;
+	struct input_dev *input_dev;
+	int error, irqf;
+
+	if (core_pdata)
+		pdata = core_pdata->touch;
+
+	wm831x_ts = devm_kzalloc(&pdev->dev, sizeof(struct wm831x_ts),
+				 GFP_KERNEL);
+	input_dev = devm_input_allocate_device(&pdev->dev);
+	if (!wm831x_ts || !input_dev) {
+		error = -ENOMEM;
+		goto err_alloc;
+	}
+
+	wm831x_ts->wm831x = wm831x;
+	wm831x_ts->input_dev = input_dev;
+	INIT_WORK(&wm831x_ts->pd_data_work, wm831x_pd_data_work);
+
+	/*
+	 * If we have a direct IRQ use it, otherwise use the interrupt
+	 * from the WM831x IRQ controller.
+	 */
+	wm831x_ts->data_irq = wm831x_irq(wm831x,
+					 platform_get_irq_byname(pdev,
+								 "TCHDATA"));
+	if (pdata && pdata->data_irq)
+		wm831x_ts->data_irq = pdata->data_irq;
+
+	wm831x_ts->pd_irq = wm831x_irq(wm831x,
+				       platform_get_irq_byname(pdev, "TCHPD"));
+	if (pdata && pdata->pd_irq)
+		wm831x_ts->pd_irq = pdata->pd_irq;
+
+	if (pdata)
+		wm831x_ts->pressure = pdata->pressure;
+	else
+		wm831x_ts->pressure = true;
+
+	/* Five wire touchscreens can't report pressure */
+	if (pdata && pdata->fivewire) {
+		wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+				WM831X_TCH_5WIRE, WM831X_TCH_5WIRE);
+
+		/* Pressure measurements are not possible for five wire mode */
+		WARN_ON(pdata->pressure && pdata->fivewire);
+		wm831x_ts->pressure = false;
+	} else {
+		wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+				WM831X_TCH_5WIRE, 0);
+	}
+
+	if (pdata) {
+		switch (pdata->isel) {
+		default:
+			dev_err(&pdev->dev, "Unsupported ISEL setting: %d\n",
+				pdata->isel);
+			/* Fall through */
+		case 200:
+		case 0:
+			wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+					WM831X_TCH_ISEL, 0);
+			break;
+		case 400:
+			wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+					WM831X_TCH_ISEL, WM831X_TCH_ISEL);
+			break;
+		}
+	}
+
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_2,
+			WM831X_TCH_PDONLY, 0);
+
+	/* Default to 96 samples/sec */
+	wm831x_set_bits(wm831x, WM831X_TOUCH_CONTROL_1,
+			WM831X_TCH_RATE_MASK, 6);
+
+	if (pdata && pdata->data_irqf)
+		irqf = pdata->data_irqf;
+	else
+		irqf = IRQF_TRIGGER_HIGH;
+
+	error = request_threaded_irq(wm831x_ts->data_irq,
+				     NULL, wm831x_ts_data_irq,
+				     irqf | IRQF_ONESHOT,
+				     "Touchscreen data", wm831x_ts);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request data IRQ %d: %d\n",
+			wm831x_ts->data_irq, error);
+		goto err_alloc;
+	}
+	disable_irq(wm831x_ts->data_irq);
+
+	if (pdata && pdata->pd_irqf)
+		irqf = pdata->pd_irqf;
+	else
+		irqf = IRQF_TRIGGER_HIGH;
+
+	error = request_threaded_irq(wm831x_ts->pd_irq,
+				     NULL, wm831x_ts_pen_down_irq,
+				     irqf | IRQF_ONESHOT,
+				     "Touchscreen pen down", wm831x_ts);
+	if (error) {
+		dev_err(&pdev->dev, "Failed to request pen down IRQ %d: %d\n",
+			wm831x_ts->pd_irq, error);
+		goto err_data_irq;
+	}
+
+	/* set up touch configuration */
+	input_dev->name = "WM831x touchscreen";
+	input_dev->phys = "wm831x";
+	input_dev->open = wm831x_ts_input_open;
+	input_dev->close = wm831x_ts_input_close;
+
+	__set_bit(EV_ABS, input_dev->evbit);
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(BTN_TOUCH, input_dev->keybit);
+
+	input_set_abs_params(input_dev, ABS_X, 0, 4095, 5, 0);
+	input_set_abs_params(input_dev, ABS_Y, 0, 4095, 5, 0);
+	if (wm831x_ts->pressure)
+		input_set_abs_params(input_dev, ABS_PRESSURE, 0, 4095, 5, 0);
+
+	input_set_drvdata(input_dev, wm831x_ts);
+	input_dev->dev.parent = &pdev->dev;
+
+	error = input_register_device(input_dev);
+	if (error)
+		goto err_pd_irq;
+
+	platform_set_drvdata(pdev, wm831x_ts);
+	return 0;
+
+err_pd_irq:
+	free_irq(wm831x_ts->pd_irq, wm831x_ts);
+err_data_irq:
+	free_irq(wm831x_ts->data_irq, wm831x_ts);
+err_alloc:
+
+	return error;
+}
+
+static int wm831x_ts_remove(struct platform_device *pdev)
+{
+	struct wm831x_ts *wm831x_ts = platform_get_drvdata(pdev);
+
+	free_irq(wm831x_ts->pd_irq, wm831x_ts);
+	free_irq(wm831x_ts->data_irq, wm831x_ts);
+
+	return 0;
+}
+
+static struct platform_driver wm831x_ts_driver = {
+	.driver = {
+		.name = "wm831x-touch",
+	},
+	.probe = wm831x_ts_probe,
+	.remove = wm831x_ts_remove,
+};
+module_platform_driver(wm831x_ts_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("WM831x PMIC touchscreen driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:wm831x-touch");
diff --git a/drivers/input/touchscreen/wm9705.c b/drivers/input/touchscreen/wm9705.c
new file mode 100644
index 0000000..adc13a5
--- /dev/null
+++ b/drivers/input/touchscreen/wm9705.c
@@ -0,0 +1,350 @@
+/*
+ * wm9705.c  --  Codec driver for Wolfson WM9705 AC97 Codec.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *                   Russell King <rmk@arm.linux.org.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/wm97xx.h>
+
+#define TS_NAME			"wm97xx"
+#define WM9705_VERSION		"1.00"
+#define DEFAULT_PRESSURE	0xb0c0
+
+/*
+ * Module parameters
+ */
+
+/*
+ * Set current used for pressure measurement.
+ *
+ * Set pil = 2 to use 400uA
+ *     pil = 1 to use 200uA and
+ *     pil = 0 to disable pressure measurement.
+ *
+ * This is used to increase the range of values returned by the adc
+ * when measureing touchpanel pressure.
+ */
+static int pil;
+module_param(pil, int, 0);
+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
+
+/*
+ * Set threshold for pressure measurement.
+ *
+ * Pen down pressure below threshold is ignored.
+ */
+static int pressure = DEFAULT_PRESSURE & 0xfff;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
+
+/*
+ * Set adc sample delay.
+ *
+ * For accurate touchpanel measurements, some settling time may be
+ * required between the switch matrix applying a voltage across the
+ * touchpanel plate and the ADC sampling the signal.
+ *
+ * This delay can be set by setting delay = n, where n is the array
+ * position of the delay in the array delay_table below.
+ * Long delays > 1ms are supported for completeness, but are not
+ * recommended.
+ */
+static int delay = 4;
+module_param(delay, int, 0);
+MODULE_PARM_DESC(delay, "Set adc sample delay.");
+
+/*
+ * Pen detect comparator threshold.
+ *
+ * 0 to Vmid in 15 steps, 0 = use zero power comparator with Vmid threshold
+ * i.e. 1 =  Vmid/15 threshold
+ *      15 =  Vmid/1 threshold
+ *
+ * Adjust this value if you are having problems with pen detect not
+ * detecting any down events.
+ */
+static int pdd = 8;
+module_param(pdd, int, 0);
+MODULE_PARM_DESC(pdd, "Set pen detect comparator threshold");
+
+/*
+ * Set adc mask function.
+ *
+ * Sources of glitch noise, such as signals driving an LCD display, may feed
+ * through to the touch screen plates and affect measurement accuracy. In
+ * order to minimise this, a signal may be applied to the MASK pin to delay or
+ * synchronise the sampling.
+ *
+ * 0 = No delay or sync
+ * 1 = High on pin stops conversions
+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
+ * 3 = Edge triggered, edge on pin starts conversion after delay param
+ */
+static int mask;
+module_param(mask, int, 0);
+MODULE_PARM_DESC(mask, "Set adc mask function.");
+
+/*
+ * ADC sample delay times in uS
+ */
+static const int delay_table[] = {
+	21,    /* 1 AC97 Link frames */
+	42,    /* 2                  */
+	84,    /* 4                  */
+	167,   /* 8                  */
+	333,   /* 16                 */
+	667,   /* 32                 */
+	1000,  /* 48                 */
+	1333,  /* 64                 */
+	2000,  /* 96                 */
+	2667,  /* 128                */
+	3333,  /* 160                */
+	4000,  /* 192                */
+	4667,  /* 224                */
+	5333,  /* 256                */
+	6000,  /* 288                */
+	0      /* No delay, switch matrix always on */
+};
+
+/*
+ * Delay after issuing a POLL command.
+ *
+ * The delay is 3 AC97 link frames + the touchpanel settling delay
+ */
+static inline void poll_delay(int d)
+{
+	udelay(3 * AC97_LINK_FRAME + delay_table[d]);
+}
+
+/*
+ * set up the physical settings of the WM9705
+ */
+static void wm9705_phy_init(struct wm97xx *wm)
+{
+	u16 dig1 = 0, dig2 = WM97XX_RPR;
+
+	/*
+	* mute VIDEO and AUX as they share X and Y touchscreen
+	* inputs on the WM9705
+	*/
+	wm97xx_reg_write(wm, AC97_AUX, 0x8000);
+	wm97xx_reg_write(wm, AC97_VIDEO, 0x8000);
+
+	/* touchpanel pressure current*/
+	if (pil == 2) {
+		dig2 |= WM9705_PIL;
+		dev_dbg(wm->dev,
+			"setting pressure measurement current to 400uA.");
+	} else if (pil)
+		dev_dbg(wm->dev,
+			"setting pressure measurement current to 200uA.");
+	if (!pil)
+		pressure = 0;
+
+	/* polling mode sample settling delay */
+	if (delay != 4) {
+		if (delay < 0 || delay > 15) {
+			dev_dbg(wm->dev, "supplied delay out of range.");
+			delay = 4;
+		}
+	}
+	dig1 &= 0xff0f;
+	dig1 |= WM97XX_DELAY(delay);
+	dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.",
+		delay_table[delay]);
+
+	/* WM9705 pdd */
+	dig2 |= (pdd & 0x000f);
+	dev_dbg(wm->dev, "setting pdd to Vmid/%d", 1 - (pdd & 0x000f));
+
+	/* mask */
+	dig2 |= ((mask & 0x3) << 4);
+
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
+}
+
+static void wm9705_dig_enable(struct wm97xx *wm, int enable)
+{
+	if (enable) {
+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
+				 wm->dig[2] | WM97XX_PRP_DET_DIG);
+		wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
+	} else
+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
+				 wm->dig[2] & ~WM97XX_PRP_DET_DIG);
+}
+
+static void wm9705_aux_prepare(struct wm97xx *wm)
+{
+	memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG);
+}
+
+static void wm9705_dig_restore(struct wm97xx *wm)
+{
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]);
+}
+
+static inline int is_pden(struct wm97xx *wm)
+{
+	return wm->dig[2] & WM9705_PDEN;
+}
+
+/*
+ * Read a sample from the WM9705 adc in polling mode.
+ */
+static int wm9705_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
+{
+	int timeout = 5 * delay;
+	bool wants_pen = adcsel & WM97XX_PEN_DOWN;
+
+	if (wants_pen && !wm->pen_probably_down) {
+		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+		if (!(data & WM97XX_PEN_DOWN))
+			return RC_PENUP;
+		wm->pen_probably_down = 1;
+	}
+
+	/* set up digitiser */
+	if (wm->mach_ops && wm->mach_ops->pre_sample)
+		wm->mach_ops->pre_sample(adcsel);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK)
+				| WM97XX_POLL | WM97XX_DELAY(delay));
+
+	/* wait 3 AC97 time slots + delay for conversion */
+	poll_delay(delay);
+
+	/* wait for POLL to go low */
+	while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL)
+	       && timeout) {
+		udelay(AC97_LINK_FRAME);
+		timeout--;
+	}
+
+	if (timeout == 0) {
+		/* If PDEN is set, we can get a timeout when pen goes up */
+		if (is_pden(wm))
+			wm->pen_probably_down = 0;
+		else
+			dev_dbg(wm->dev, "adc sample timeout");
+		return RC_PENUP;
+	}
+
+	*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	if (wm->mach_ops && wm->mach_ops->post_sample)
+		wm->mach_ops->post_sample(adcsel);
+
+	/* check we have correct sample */
+	if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) {
+		dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x",
+			adcsel & WM97XX_ADCSEL_MASK,
+			*sample & WM97XX_ADCSEL_MASK);
+		return RC_PENUP;
+	}
+
+	if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) {
+		wm->pen_probably_down = 0;
+		return RC_PENUP;
+	}
+
+	return RC_VALID;
+}
+
+/*
+ * Sample the WM9705 touchscreen in polling mode
+ */
+static int wm9705_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
+{
+	int rc;
+
+	rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, &data->x);
+	if (rc != RC_VALID)
+		return rc;
+	rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, &data->y);
+	if (rc != RC_VALID)
+		return rc;
+	if (pil) {
+		rc = wm9705_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN, &data->p);
+		if (rc != RC_VALID)
+			return rc;
+	} else
+		data->p = DEFAULT_PRESSURE;
+
+	return RC_VALID;
+}
+
+/*
+ * Enable WM9705 continuous mode, i.e. touch data is streamed across
+ * an AC97 slot
+ */
+static int wm9705_acc_enable(struct wm97xx *wm, int enable)
+{
+	u16 dig1, dig2;
+	int ret = 0;
+
+	dig1 = wm->dig[1];
+	dig2 = wm->dig[2];
+
+	if (enable) {
+		/* continuous mode */
+		if (wm->mach_ops->acc_startup &&
+		    (ret = wm->mach_ops->acc_startup(wm)) < 0)
+			return ret;
+		dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK |
+			  WM97XX_DELAY_MASK | WM97XX_SLT_MASK);
+		dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN |
+			WM97XX_DELAY(delay) |
+			WM97XX_SLT(wm->acc_slot) |
+			WM97XX_RATE(wm->acc_rate);
+		if (pil)
+			dig1 |= WM97XX_ADCSEL_PRES;
+		dig2 |= WM9705_PDEN;
+	} else {
+		dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN);
+		dig2 &= ~WM9705_PDEN;
+		if (wm->mach_ops->acc_shutdown)
+			wm->mach_ops->acc_shutdown(wm);
+	}
+
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
+
+	return ret;
+}
+
+struct wm97xx_codec_drv wm9705_codec = {
+	.id = WM9705_ID2,
+	.name = "wm9705",
+	.poll_sample = wm9705_poll_sample,
+	.poll_touch = wm9705_poll_touch,
+	.acc_enable = wm9705_acc_enable,
+	.phy_init = wm9705_phy_init,
+	.dig_enable = wm9705_dig_enable,
+	.dig_restore = wm9705_dig_restore,
+	.aux_prepare = wm9705_aux_prepare,
+};
+EXPORT_SYMBOL_GPL(wm9705_codec);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
+MODULE_DESCRIPTION("WM9705 Touch Screen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm9712.c b/drivers/input/touchscreen/wm9712.c
new file mode 100644
index 0000000..705ffa1
--- /dev/null
+++ b/drivers/input/touchscreen/wm9712.c
@@ -0,0 +1,471 @@
+/*
+ * wm9712.c  --  Codec driver for Wolfson WM9712 AC97 Codecs.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2007 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *                   Russell King <rmk@arm.linux.org.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/wm97xx.h>
+
+#define TS_NAME			"wm97xx"
+#define WM9712_VERSION		"1.00"
+#define DEFAULT_PRESSURE	0xb0c0
+
+/*
+ * Module parameters
+ */
+
+/*
+ * Set internal pull up for pen detect.
+ *
+ * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive)
+ * i.e. pull up resistance = 64k Ohms / rpu.
+ *
+ * Adjust this value if you are having problems with pen detect not
+ * detecting any down event.
+ */
+static int rpu = 8;
+module_param(rpu, int, 0);
+MODULE_PARM_DESC(rpu, "Set internal pull up resistor for pen detect.");
+
+/*
+ * Set current used for pressure measurement.
+ *
+ * Set pil = 2 to use 400uA
+ *     pil = 1 to use 200uA and
+ *     pil = 0 to disable pressure measurement.
+ *
+ * This is used to increase the range of values returned by the adc
+ * when measureing touchpanel pressure.
+ */
+static int pil;
+module_param(pil, int, 0);
+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
+
+/*
+ * Set threshold for pressure measurement.
+ *
+ * Pen down pressure below threshold is ignored.
+ */
+static int pressure = DEFAULT_PRESSURE & 0xfff;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
+
+/*
+ * Set adc sample delay.
+ *
+ * For accurate touchpanel measurements, some settling time may be
+ * required between the switch matrix applying a voltage across the
+ * touchpanel plate and the ADC sampling the signal.
+ *
+ * This delay can be set by setting delay = n, where n is the array
+ * position of the delay in the array delay_table below.
+ * Long delays > 1ms are supported for completeness, but are not
+ * recommended.
+ */
+static int delay = 3;
+module_param(delay, int, 0);
+MODULE_PARM_DESC(delay, "Set adc sample delay.");
+
+/*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
+ * Set adc mask function.
+ *
+ * Sources of glitch noise, such as signals driving an LCD display, may feed
+ * through to the touch screen plates and affect measurement accuracy. In
+ * order to minimise this, a signal may be applied to the MASK pin to delay or
+ * synchronise the sampling.
+ *
+ * 0 = No delay or sync
+ * 1 = High on pin stops conversions
+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
+ * 3 = Edge triggered, edge on pin starts conversion after delay param
+ */
+static int mask;
+module_param(mask, int, 0);
+MODULE_PARM_DESC(mask, "Set adc mask function.");
+
+/*
+ * Coordinate Polling Enable.
+ *
+ * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together
+ * for every poll.
+ */
+static int coord;
+module_param(coord, int, 0);
+MODULE_PARM_DESC(coord, "Polling coordinate mode");
+
+/*
+ * ADC sample delay times in uS
+ */
+static const int delay_table[] = {
+	21,    /* 1 AC97 Link frames */
+	42,    /* 2 */
+	84,    /* 4 */
+	167,   /* 8 */
+	333,   /* 16 */
+	667,   /* 32 */
+	1000,  /* 48 */
+	1333,  /* 64 */
+	2000,  /* 96 */
+	2667,  /* 128 */
+	3333,  /* 160 */
+	4000,  /* 192 */
+	4667,  /* 224 */
+	5333,  /* 256 */
+	6000,  /* 288 */
+	0      /* No delay, switch matrix always on */
+};
+
+/*
+ * Delay after issuing a POLL command.
+ *
+ * The delay is 3 AC97 link frames + the touchpanel settling delay
+ */
+static inline void poll_delay(int d)
+{
+	udelay(3 * AC97_LINK_FRAME + delay_table[d]);
+}
+
+/*
+ * set up the physical settings of the WM9712
+ */
+static void wm9712_phy_init(struct wm97xx *wm)
+{
+	u16 dig1 = 0;
+	u16 dig2 = WM97XX_RPR | WM9712_RPU(1);
+
+	/* WM9712 rpu */
+	if (rpu) {
+		dig2 &= 0xffc0;
+		dig2 |= WM9712_RPU(rpu);
+		dev_dbg(wm->dev, "setting pen detect pull-up to %d Ohms\n",
+			64000 / rpu);
+	}
+
+	/* WM9712 five wire */
+	if (five_wire) {
+		dig2 |= WM9712_45W;
+		dev_dbg(wm->dev, "setting 5-wire touchscreen mode.\n");
+
+		if (pil) {
+			dev_warn(wm->dev, "pressure measurement is not "
+				 "supported in 5-wire mode\n");
+			pil = 0;
+		}
+	}
+
+	/* touchpanel pressure current*/
+	if (pil == 2) {
+		dig2 |= WM9712_PIL;
+		dev_dbg(wm->dev,
+			"setting pressure measurement current to 400uA.\n");
+	} else if (pil)
+		dev_dbg(wm->dev,
+			"setting pressure measurement current to 200uA.\n");
+	if (!pil)
+		pressure = 0;
+
+	/* polling mode sample settling delay */
+	if (delay < 0 || delay > 15) {
+		dev_dbg(wm->dev, "supplied delay out of range.\n");
+		delay = 4;
+	}
+	dig1 &= 0xff0f;
+	dig1 |= WM97XX_DELAY(delay);
+	dev_dbg(wm->dev, "setting adc sample delay to %d u Secs.\n",
+		delay_table[delay]);
+
+	/* mask */
+	dig2 |= ((mask & 0x3) << 6);
+	if (mask) {
+		u16 reg;
+		/* Set GPIO4 as Mask Pin*/
+		reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
+		wm97xx_reg_write(wm, AC97_MISC_AFE, reg | WM97XX_GPIO_4);
+		reg = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+		wm97xx_reg_write(wm, AC97_GPIO_CFG, reg | WM97XX_GPIO_4);
+	}
+
+	/* wait - coord mode */
+	if (coord)
+		dig2 |= WM9712_WAIT;
+
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
+}
+
+static void wm9712_dig_enable(struct wm97xx *wm, int enable)
+{
+	u16 dig2 = wm->dig[2];
+
+	if (enable) {
+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
+				 dig2 | WM97XX_PRP_DET_DIG);
+		wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
+	} else
+		wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2,
+				 dig2 & ~WM97XX_PRP_DET_DIG);
+}
+
+static void wm9712_aux_prepare(struct wm97xx *wm)
+{
+	memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, 0);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, WM97XX_PRP_DET_DIG);
+}
+
+static void wm9712_dig_restore(struct wm97xx *wm)
+{
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, wm->dig_save[1]);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, wm->dig_save[2]);
+}
+
+static inline int is_pden(struct wm97xx *wm)
+{
+	return wm->dig[2] & WM9712_PDEN;
+}
+
+/*
+ * Read a sample from the WM9712 adc in polling mode.
+ */
+static int wm9712_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
+{
+	int timeout = 5 * delay;
+	bool wants_pen = adcsel & WM97XX_PEN_DOWN;
+
+	if (wants_pen && !wm->pen_probably_down) {
+		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+		if (!(data & WM97XX_PEN_DOWN))
+			return RC_PENUP;
+		wm->pen_probably_down = 1;
+	}
+
+	/* set up digitiser */
+	if (wm->mach_ops && wm->mach_ops->pre_sample)
+		wm->mach_ops->pre_sample(adcsel);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, (adcsel & WM97XX_ADCSEL_MASK)
+				| WM97XX_POLL | WM97XX_DELAY(delay));
+
+	/* wait 3 AC97 time slots + delay for conversion */
+	poll_delay(delay);
+
+	/* wait for POLL to go low */
+	while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL)
+	       && timeout) {
+		udelay(AC97_LINK_FRAME);
+		timeout--;
+	}
+
+	if (timeout <= 0) {
+		/* If PDEN is set, we can get a timeout when pen goes up */
+		if (is_pden(wm))
+			wm->pen_probably_down = 0;
+		else
+			dev_dbg(wm->dev, "adc sample timeout\n");
+		return RC_PENUP;
+	}
+
+	*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	if (wm->mach_ops && wm->mach_ops->post_sample)
+		wm->mach_ops->post_sample(adcsel);
+
+	/* check we have correct sample */
+	if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) {
+		dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x\n",
+			adcsel & WM97XX_ADCSEL_MASK,
+			*sample & WM97XX_ADCSEL_MASK);
+		return RC_AGAIN;
+	}
+
+	if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) {
+		/* Sometimes it reads a wrong value the first time. */
+		*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+		if (!(*sample & WM97XX_PEN_DOWN)) {
+			wm->pen_probably_down = 0;
+			return RC_PENUP;
+		}
+	}
+
+	return RC_VALID;
+}
+
+/*
+ * Read a coord from the WM9712 adc in polling mode.
+ */
+static int wm9712_poll_coord(struct wm97xx *wm, struct wm97xx_data *data)
+{
+	int timeout = 5 * delay;
+
+	if (!wm->pen_probably_down) {
+		u16 data_rd = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+		if (!(data_rd & WM97XX_PEN_DOWN))
+			return RC_PENUP;
+		wm->pen_probably_down = 1;
+	}
+
+	/* set up digitiser */
+	if (wm->mach_ops && wm->mach_ops->pre_sample)
+		wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
+
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1,
+		WM97XX_COO | WM97XX_POLL | WM97XX_DELAY(delay));
+
+	/* wait 3 AC97 time slots + delay for conversion and read x */
+	poll_delay(delay);
+	data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	/* wait for POLL to go low */
+	while ((wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER1) & WM97XX_POLL)
+	       && timeout) {
+		udelay(AC97_LINK_FRAME);
+		timeout--;
+	}
+
+	if (timeout <= 0) {
+		/* If PDEN is set, we can get a timeout when pen goes up */
+		if (is_pden(wm))
+			wm->pen_probably_down = 0;
+		else
+			dev_dbg(wm->dev, "adc sample timeout\n");
+		return RC_PENUP;
+	}
+
+	/* read back y data */
+	data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	if (pil)
+		data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	else
+		data->p = DEFAULT_PRESSURE;
+
+	if (wm->mach_ops && wm->mach_ops->post_sample)
+		wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
+
+	/* check we have correct sample */
+	if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y))
+		goto err;
+	if (pil && !(data->p & WM97XX_ADCSEL_PRES))
+		goto err;
+
+	if (!(data->x & WM97XX_PEN_DOWN) || !(data->y & WM97XX_PEN_DOWN)) {
+		wm->pen_probably_down = 0;
+		return RC_PENUP;
+	}
+	return RC_VALID;
+err:
+	return 0;
+}
+
+/*
+ * Sample the WM9712 touchscreen in polling mode
+ */
+static int wm9712_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
+{
+	int rc;
+
+	if (coord) {
+		rc = wm9712_poll_coord(wm, data);
+		if (rc != RC_VALID)
+			return rc;
+	} else {
+		rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN,
+					&data->x);
+		if (rc != RC_VALID)
+			return rc;
+
+		rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN,
+					&data->y);
+		if (rc != RC_VALID)
+			return rc;
+
+		if (pil && !five_wire) {
+			rc = wm9712_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN,
+						&data->p);
+			if (rc != RC_VALID)
+				return rc;
+		} else
+			data->p = DEFAULT_PRESSURE;
+	}
+	return RC_VALID;
+}
+
+/*
+ * Enable WM9712 continuous mode, i.e. touch data is streamed across
+ * an AC97 slot
+ */
+static int wm9712_acc_enable(struct wm97xx *wm, int enable)
+{
+	u16 dig1, dig2;
+	int ret = 0;
+
+	dig1 = wm->dig[1];
+	dig2 = wm->dig[2];
+
+	if (enable) {
+		/* continuous mode */
+		if (wm->mach_ops->acc_startup) {
+			ret = wm->mach_ops->acc_startup(wm);
+			if (ret < 0)
+				return ret;
+		}
+		dig1 &= ~(WM97XX_CM_RATE_MASK | WM97XX_ADCSEL_MASK |
+			WM97XX_DELAY_MASK | WM97XX_SLT_MASK);
+		dig1 |= WM97XX_CTC | WM97XX_COO | WM97XX_SLEN |
+			WM97XX_DELAY(delay) |
+			WM97XX_SLT(wm->acc_slot) |
+			WM97XX_RATE(wm->acc_rate);
+		if (pil)
+			dig1 |= WM97XX_ADCSEL_PRES;
+		dig2 |= WM9712_PDEN;
+	} else {
+		dig1 &= ~(WM97XX_CTC | WM97XX_COO | WM97XX_SLEN);
+		dig2 &= ~WM9712_PDEN;
+		if (wm->mach_ops->acc_shutdown)
+			wm->mach_ops->acc_shutdown(wm);
+	}
+
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER1, dig1);
+	wm97xx_reg_write(wm, AC97_WM97XX_DIGITISER2, dig2);
+
+	return 0;
+}
+
+struct wm97xx_codec_drv wm9712_codec = {
+	.id = WM9712_ID2,
+	.name = "wm9712",
+	.poll_sample = wm9712_poll_sample,
+	.poll_touch = wm9712_poll_touch,
+	.acc_enable = wm9712_acc_enable,
+	.phy_init = wm9712_phy_init,
+	.dig_enable = wm9712_dig_enable,
+	.dig_restore = wm9712_dig_restore,
+	.aux_prepare = wm9712_aux_prepare,
+};
+EXPORT_SYMBOL_GPL(wm9712_codec);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
+MODULE_DESCRIPTION("WM9712 Touch Screen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c
new file mode 100644
index 0000000..572a5a6
--- /dev/null
+++ b/drivers/input/touchscreen/wm9713.c
@@ -0,0 +1,481 @@
+/*
+ * wm9713.c  --  Codec touch driver for Wolfson WM9713 AC97 Codec.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *                   Russell King <rmk@arm.linux.org.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/input.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+#include <linux/wm97xx.h>
+
+#define TS_NAME			"wm97xx"
+#define WM9713_VERSION		"1.00"
+#define DEFAULT_PRESSURE	0xb0c0
+
+/*
+ * Module parameters
+ */
+
+/*
+ * Set internal pull up for pen detect.
+ *
+ * Pull up is in the range 1.02k (least sensitive) to 64k (most sensitive)
+ * i.e. pull up resistance = 64k Ohms / rpu.
+ *
+ * Adjust this value if you are having problems with pen detect not
+ * detecting any down event.
+ */
+static int rpu = 8;
+module_param(rpu, int, 0);
+MODULE_PARM_DESC(rpu, "Set internal pull up resistor for pen detect.");
+
+/*
+ * Set current used for pressure measurement.
+ *
+ * Set pil = 2 to use 400uA
+ *     pil = 1 to use 200uA and
+ *     pil = 0 to disable pressure measurement.
+ *
+ * This is used to increase the range of values returned by the adc
+ * when measureing touchpanel pressure.
+ */
+static int pil;
+module_param(pil, int, 0);
+MODULE_PARM_DESC(pil, "Set current used for pressure measurement.");
+
+/*
+ * Set threshold for pressure measurement.
+ *
+ * Pen down pressure below threshold is ignored.
+ */
+static int pressure = DEFAULT_PRESSURE & 0xfff;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Set threshold for pressure measurement.");
+
+/*
+ * Set adc sample delay.
+ *
+ * For accurate touchpanel measurements, some settling time may be
+ * required between the switch matrix applying a voltage across the
+ * touchpanel plate and the ADC sampling the signal.
+ *
+ * This delay can be set by setting delay = n, where n is the array
+ * position of the delay in the array delay_table below.
+ * Long delays > 1ms are supported for completeness, but are not
+ * recommended.
+ */
+static int delay = 4;
+module_param(delay, int, 0);
+MODULE_PARM_DESC(delay, "Set adc sample delay.");
+
+/*
+ * Set five_wire = 1 to use a 5 wire touchscreen.
+ *
+ * NOTE: Five wire mode does not allow for readback of pressure.
+ */
+static int five_wire;
+module_param(five_wire, int, 0);
+MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen.");
+
+/*
+ * Set adc mask function.
+ *
+ * Sources of glitch noise, such as signals driving an LCD display, may feed
+ * through to the touch screen plates and affect measurement accuracy. In
+ * order to minimise this, a signal may be applied to the MASK pin to delay or
+ * synchronise the sampling.
+ *
+ * 0 = No delay or sync
+ * 1 = High on pin stops conversions
+ * 2 = Edge triggered, edge on pin delays conversion by delay param (above)
+ * 3 = Edge triggered, edge on pin starts conversion after delay param
+ */
+static int mask;
+module_param(mask, int, 0);
+MODULE_PARM_DESC(mask, "Set adc mask function.");
+
+/*
+ * Coordinate Polling Enable.
+ *
+ * Set to 1 to enable coordinate polling. e.g. x,y[,p] is sampled together
+ * for every poll.
+ */
+static int coord;
+module_param(coord, int, 0);
+MODULE_PARM_DESC(coord, "Polling coordinate mode");
+
+/*
+ * ADC sample delay times in uS
+ */
+static const int delay_table[] = {
+	21,    /* 1 AC97 Link frames */
+	42,    /* 2 */
+	84,    /* 4 */
+	167,   /* 8 */
+	333,   /* 16 */
+	667,   /* 32 */
+	1000,  /* 48 */
+	1333,  /* 64 */
+	2000,  /* 96 */
+	2667,  /* 128 */
+	3333,  /* 160 */
+	4000,  /* 192 */
+	4667,  /* 224 */
+	5333,  /* 256 */
+	6000,  /* 288 */
+	0      /* No delay, switch matrix always on */
+};
+
+/*
+ * Delay after issuing a POLL command.
+ *
+ * The delay is 3 AC97 link frames + the touchpanel settling delay
+ */
+static inline void poll_delay(int d)
+{
+	udelay(3 * AC97_LINK_FRAME + delay_table[d]);
+}
+
+/*
+ * set up the physical settings of the WM9713
+ */
+static void wm9713_phy_init(struct wm97xx *wm)
+{
+	u16 dig1 = 0, dig2, dig3;
+
+	/* default values */
+	dig2 = WM97XX_DELAY(4) | WM97XX_SLT(5);
+	dig3 = WM9712_RPU(1);
+
+	/* rpu */
+	if (rpu) {
+		dig3 &= 0xffc0;
+		dig3 |= WM9712_RPU(rpu);
+		dev_info(wm->dev, "setting pen detect pull-up to %d Ohms\n",
+			 64000 / rpu);
+	}
+
+	/* Five wire panel? */
+	if (five_wire) {
+		dig3 |= WM9713_45W;
+		dev_info(wm->dev, "setting 5-wire touchscreen mode.");
+
+		if (pil) {
+			dev_warn(wm->dev,
+				 "Pressure measurement not supported in 5 "
+				 "wire mode, disabling\n");
+			pil = 0;
+		}
+	}
+
+	/* touchpanel pressure */
+	if (pil == 2) {
+		dig3 |= WM9712_PIL;
+		dev_info(wm->dev,
+			 "setting pressure measurement current to 400uA.");
+	} else if (pil)
+		dev_info(wm->dev,
+			 "setting pressure measurement current to 200uA.");
+	if (!pil)
+		pressure = 0;
+
+	/* sample settling delay */
+	if (delay < 0 || delay > 15) {
+		dev_info(wm->dev, "supplied delay out of range.");
+		delay = 4;
+		dev_info(wm->dev, "setting adc sample delay to %d u Secs.",
+			 delay_table[delay]);
+	}
+	dig2 &= 0xff0f;
+	dig2 |= WM97XX_DELAY(delay);
+
+	/* mask */
+	dig3 |= ((mask & 0x3) << 4);
+	if (coord)
+		dig3 |= WM9713_WAIT;
+
+	wm->misc = wm97xx_reg_read(wm, 0x5a);
+
+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3);
+	wm97xx_reg_write(wm, AC97_GPIO_STICKY, 0x0);
+}
+
+static void wm9713_dig_enable(struct wm97xx *wm, int enable)
+{
+	u16 val;
+
+	if (enable) {
+		val = wm97xx_reg_read(wm, AC97_EXTENDED_MID);
+		wm97xx_reg_write(wm, AC97_EXTENDED_MID, val & 0x7fff);
+		wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] |
+				 WM97XX_PRP_DET_DIG);
+		wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD); /* dummy read */
+	} else {
+		wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2] &
+					~WM97XX_PRP_DET_DIG);
+		val = wm97xx_reg_read(wm, AC97_EXTENDED_MID);
+		wm97xx_reg_write(wm, AC97_EXTENDED_MID, val | 0x8000);
+	}
+}
+
+static void wm9713_dig_restore(struct wm97xx *wm)
+{
+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig_save[0]);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig_save[1]);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig_save[2]);
+}
+
+static void wm9713_aux_prepare(struct wm97xx *wm)
+{
+	memcpy(wm->dig_save, wm->dig, sizeof(wm->dig));
+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, 0);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG2, 0);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG3, WM97XX_PRP_DET_DIG);
+}
+
+static inline int is_pden(struct wm97xx *wm)
+{
+	return wm->dig[2] & WM9713_PDEN;
+}
+
+/*
+ * Read a sample from the WM9713 adc in polling mode.
+ */
+static int wm9713_poll_sample(struct wm97xx *wm, int adcsel, int *sample)
+{
+	u16 dig1;
+	int timeout = 5 * delay;
+	bool wants_pen = adcsel & WM97XX_PEN_DOWN;
+
+	if (wants_pen && !wm->pen_probably_down) {
+		u16 data = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+		if (!(data & WM97XX_PEN_DOWN))
+			return RC_PENUP;
+		wm->pen_probably_down = 1;
+	}
+
+	/* set up digitiser */
+	dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1);
+	dig1 &= ~WM9713_ADCSEL_MASK;
+	/* WM97XX_ADCSEL_* channels need to be converted to WM9713 format */
+	dig1 |= 1 << ((adcsel & WM97XX_ADCSEL_MASK) >> 12);
+
+	if (wm->mach_ops && wm->mach_ops->pre_sample)
+		wm->mach_ops->pre_sample(adcsel);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1 | WM9713_POLL);
+
+	/* wait 3 AC97 time slots + delay for conversion */
+	poll_delay(delay);
+
+	/* wait for POLL to go low */
+	while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL) &&
+		timeout) {
+		udelay(AC97_LINK_FRAME);
+		timeout--;
+	}
+
+	if (timeout <= 0) {
+		/* If PDEN is set, we can get a timeout when pen goes up */
+		if (is_pden(wm))
+			wm->pen_probably_down = 0;
+		else
+			dev_dbg(wm->dev, "adc sample timeout");
+		return RC_PENUP;
+	}
+
+	*sample = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	if (wm->mach_ops && wm->mach_ops->post_sample)
+		wm->mach_ops->post_sample(adcsel);
+
+	/* check we have correct sample */
+	if ((*sample ^ adcsel) & WM97XX_ADCSEL_MASK) {
+		dev_dbg(wm->dev, "adc wrong sample, wanted %x got %x",
+			adcsel & WM97XX_ADCSEL_MASK,
+			*sample & WM97XX_ADCSEL_MASK);
+		return RC_PENUP;
+	}
+
+	if (wants_pen && !(*sample & WM97XX_PEN_DOWN)) {
+		wm->pen_probably_down = 0;
+		return RC_PENUP;
+	}
+
+	return RC_VALID;
+}
+
+/*
+ * Read a coordinate from the WM9713 adc in polling mode.
+ */
+static int wm9713_poll_coord(struct wm97xx *wm, struct wm97xx_data *data)
+{
+	u16 dig1;
+	int timeout = 5 * delay;
+
+	if (!wm->pen_probably_down) {
+		u16 val = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+		if (!(val & WM97XX_PEN_DOWN))
+			return RC_PENUP;
+		wm->pen_probably_down = 1;
+	}
+
+	/* set up digitiser */
+	dig1 = wm97xx_reg_read(wm, AC97_WM9713_DIG1);
+	dig1 &= ~WM9713_ADCSEL_MASK;
+	if (pil)
+		dig1 |= WM9713_ADCSEL_PRES;
+
+	if (wm->mach_ops && wm->mach_ops->pre_sample)
+		wm->mach_ops->pre_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG1,
+			 dig1 | WM9713_POLL | WM9713_COO);
+
+	/* wait 3 AC97 time slots + delay for conversion */
+	poll_delay(delay);
+	data->x = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	/* wait for POLL to go low */
+	while ((wm97xx_reg_read(wm, AC97_WM9713_DIG1) & WM9713_POLL)
+	       && timeout) {
+		udelay(AC97_LINK_FRAME);
+		timeout--;
+	}
+
+	if (timeout <= 0) {
+		/* If PDEN is set, we can get a timeout when pen goes up */
+		if (is_pden(wm))
+			wm->pen_probably_down = 0;
+		else
+			dev_dbg(wm->dev, "adc sample timeout");
+		return RC_PENUP;
+	}
+
+	/* read back data */
+	data->y = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	if (pil)
+		data->p = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD);
+	else
+		data->p = DEFAULT_PRESSURE;
+
+	if (wm->mach_ops && wm->mach_ops->post_sample)
+		wm->mach_ops->post_sample(WM97XX_ADCSEL_X | WM97XX_ADCSEL_Y);
+
+	/* check we have correct sample */
+	if (!(data->x & WM97XX_ADCSEL_X) || !(data->y & WM97XX_ADCSEL_Y))
+		goto err;
+	if (pil && !(data->p & WM97XX_ADCSEL_PRES))
+		goto err;
+
+	if (!(data->x & WM97XX_PEN_DOWN) || !(data->y & WM97XX_PEN_DOWN)) {
+		wm->pen_probably_down = 0;
+		return RC_PENUP;
+	}
+	return RC_VALID;
+err:
+	return 0;
+}
+
+/*
+ * Sample the WM9713 touchscreen in polling mode
+ */
+static int wm9713_poll_touch(struct wm97xx *wm, struct wm97xx_data *data)
+{
+	int rc;
+
+	if (coord) {
+		rc = wm9713_poll_coord(wm, data);
+		if (rc != RC_VALID)
+			return rc;
+	} else {
+		rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_X | WM97XX_PEN_DOWN, &data->x);
+		if (rc != RC_VALID)
+			return rc;
+		rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_Y | WM97XX_PEN_DOWN, &data->y);
+		if (rc != RC_VALID)
+			return rc;
+		if (pil) {
+			rc = wm9713_poll_sample(wm, WM97XX_ADCSEL_PRES | WM97XX_PEN_DOWN,
+						&data->p);
+			if (rc != RC_VALID)
+				return rc;
+		} else
+			data->p = DEFAULT_PRESSURE;
+	}
+	return RC_VALID;
+}
+
+/*
+ * Enable WM9713 continuous mode, i.e. touch data is streamed across
+ * an AC97 slot
+ */
+static int wm9713_acc_enable(struct wm97xx *wm, int enable)
+{
+	u16 dig1, dig2, dig3;
+	int ret = 0;
+
+	dig1 = wm->dig[0];
+	dig2 = wm->dig[1];
+	dig3 = wm->dig[2];
+
+	if (enable) {
+		/* continuous mode */
+		if (wm->mach_ops->acc_startup &&
+			(ret = wm->mach_ops->acc_startup(wm)) < 0)
+			return ret;
+
+		dig1 &= ~WM9713_ADCSEL_MASK;
+		dig1 |= WM9713_CTC | WM9713_COO | WM9713_ADCSEL_X |
+			WM9713_ADCSEL_Y;
+		if (pil)
+			dig1 |= WM9713_ADCSEL_PRES;
+		dig2 &= ~(WM97XX_DELAY_MASK | WM97XX_SLT_MASK  |
+			WM97XX_CM_RATE_MASK);
+		dig2 |= WM97XX_SLEN | WM97XX_DELAY(delay) |
+		WM97XX_SLT(wm->acc_slot) | WM97XX_RATE(wm->acc_rate);
+		dig3 |= WM9713_PDEN;
+	} else {
+		dig1 &= ~(WM9713_CTC | WM9713_COO);
+		dig2 &= ~WM97XX_SLEN;
+		dig3 &= ~WM9713_PDEN;
+		if (wm->mach_ops->acc_shutdown)
+			wm->mach_ops->acc_shutdown(wm);
+	}
+
+	wm97xx_reg_write(wm, AC97_WM9713_DIG1, dig1);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG2, dig2);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG3, dig3);
+
+	return ret;
+}
+
+struct wm97xx_codec_drv wm9713_codec = {
+	.id = WM9713_ID2,
+	.name = "wm9713",
+	.poll_sample = wm9713_poll_sample,
+	.poll_touch = wm9713_poll_touch,
+	.acc_enable = wm9713_acc_enable,
+	.phy_init = wm9713_phy_init,
+	.dig_enable = wm9713_dig_enable,
+	.dig_restore = wm9713_dig_restore,
+	.aux_prepare = wm9713_aux_prepare,
+};
+EXPORT_SYMBOL_GPL(wm9713_codec);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
+MODULE_DESCRIPTION("WM9713 Touch Screen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c
new file mode 100644
index 0000000..1534e9b
--- /dev/null
+++ b/drivers/input/touchscreen/wm97xx-core.c
@@ -0,0 +1,854 @@
+/*
+ * wm97xx-core.c  --  Touch screen driver core for Wolfson WM9705, WM9712
+ *                    and WM9713 AC97 Codecs.
+ *
+ * Copyright 2003, 2004, 2005, 2006, 2007, 2008 Wolfson Microelectronics PLC.
+ * Author: Liam Girdwood <lrg@slimlogic.co.uk>
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *                   Russell King <rmk@arm.linux.org.uk>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Notes:
+ *
+ *  Features:
+ *       - supports WM9705, WM9712, WM9713
+ *       - polling mode
+ *       - continuous mode (arch-dependent)
+ *       - adjustable rpu/dpp settings
+ *       - adjustable pressure current
+ *       - adjustable sample settle delay
+ *       - 4 and 5 wire touchscreens (5 wire is WM9712 only)
+ *       - pen down detection
+ *       - battery monitor
+ *       - sample AUX adcs
+ *       - power management
+ *       - codec GPIO
+ *       - codec event notification
+ * Todo
+ *       - Support for async sampling control for noisy LCDs.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/string.h>
+#include <linux/proc_fs.h>
+#include <linux/pm.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/workqueue.h>
+#include <linux/wm97xx.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define TS_NAME			"wm97xx"
+#define WM_CORE_VERSION		"1.00"
+#define DEFAULT_PRESSURE	0xb0c0
+
+
+/*
+ * Touchscreen absolute values
+ *
+ * These parameters are used to help the input layer discard out of
+ * range readings and reduce jitter etc.
+ *
+ *   o min, max:- indicate the min and max values your touch screen returns
+ *   o fuzz:- use a higher number to reduce jitter
+ *
+ * The default values correspond to Mainstone II in QVGA mode
+ *
+ * Please read
+ * Documentation/input/input-programming.txt for more details.
+ */
+
+static int abs_x[3] = {150, 4000, 5};
+module_param_array(abs_x, int, NULL, 0);
+MODULE_PARM_DESC(abs_x, "Touchscreen absolute X min, max, fuzz");
+
+static int abs_y[3] = {200, 4000, 40};
+module_param_array(abs_y, int, NULL, 0);
+MODULE_PARM_DESC(abs_y, "Touchscreen absolute Y min, max, fuzz");
+
+static int abs_p[3] = {0, 150, 4};
+module_param_array(abs_p, int, NULL, 0);
+MODULE_PARM_DESC(abs_p, "Touchscreen absolute Pressure min, max, fuzz");
+
+/*
+ * wm97xx IO access, all IO locking done by AC97 layer
+ */
+int wm97xx_reg_read(struct wm97xx *wm, u16 reg)
+{
+	if (wm->ac97)
+		return wm->ac97->bus->ops->read(wm->ac97, reg);
+	else
+		return -1;
+}
+EXPORT_SYMBOL_GPL(wm97xx_reg_read);
+
+void wm97xx_reg_write(struct wm97xx *wm, u16 reg, u16 val)
+{
+	/* cache digitiser registers */
+	if (reg >= AC97_WM9713_DIG1 && reg <= AC97_WM9713_DIG3)
+		wm->dig[(reg - AC97_WM9713_DIG1) >> 1] = val;
+
+	/* cache gpio regs */
+	if (reg >= AC97_GPIO_CFG && reg <= AC97_MISC_AFE)
+		wm->gpio[(reg - AC97_GPIO_CFG) >> 1] = val;
+
+	/* wm9713 irq reg */
+	if (reg == 0x5a)
+		wm->misc = val;
+
+	if (wm->ac97)
+		wm->ac97->bus->ops->write(wm->ac97, reg, val);
+}
+EXPORT_SYMBOL_GPL(wm97xx_reg_write);
+
+/**
+ * wm97xx_read_aux_adc - Read the aux adc.
+ * @wm: wm97xx device.
+ * @adcsel: codec ADC to be read
+ *
+ * Reads the selected AUX ADC.
+ */
+
+int wm97xx_read_aux_adc(struct wm97xx *wm, u16 adcsel)
+{
+	int power_adc = 0, auxval;
+	u16 power = 0;
+	int rc = 0;
+	int timeout = 0;
+
+	/* get codec */
+	mutex_lock(&wm->codec_mutex);
+
+	/* When the touchscreen is not in use, we may have to power up
+	 * the AUX ADC before we can use sample the AUX inputs->
+	 */
+	if (wm->id == WM9713_ID2 &&
+	    (power = wm97xx_reg_read(wm, AC97_EXTENDED_MID)) & 0x8000) {
+		power_adc = 1;
+		wm97xx_reg_write(wm, AC97_EXTENDED_MID, power & 0x7fff);
+	}
+
+	/* Prepare the codec for AUX reading */
+	wm->codec->aux_prepare(wm);
+
+	/* Turn polling mode on to read AUX ADC */
+	wm->pen_probably_down = 1;
+
+	while (rc != RC_VALID && timeout++ < 5)
+		rc = wm->codec->poll_sample(wm, adcsel, &auxval);
+
+	if (power_adc)
+		wm97xx_reg_write(wm, AC97_EXTENDED_MID, power | 0x8000);
+
+	wm->codec->dig_restore(wm);
+
+	wm->pen_probably_down = 0;
+
+	if (timeout >= 5) {
+		dev_err(wm->dev,
+			"timeout reading auxadc %d, disabling digitiser\n",
+			adcsel);
+		wm->codec->dig_enable(wm, false);
+	}
+
+	mutex_unlock(&wm->codec_mutex);
+	return (rc == RC_VALID ? auxval & 0xfff : -EBUSY);
+}
+EXPORT_SYMBOL_GPL(wm97xx_read_aux_adc);
+
+/**
+ * wm97xx_get_gpio - Get the status of a codec GPIO.
+ * @wm: wm97xx device.
+ * @gpio: gpio
+ *
+ * Get the status of a codec GPIO pin
+ */
+
+enum wm97xx_gpio_status wm97xx_get_gpio(struct wm97xx *wm, u32 gpio)
+{
+	u16 status;
+	enum wm97xx_gpio_status ret;
+
+	mutex_lock(&wm->codec_mutex);
+	status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+
+	if (status & gpio)
+		ret = WM97XX_GPIO_HIGH;
+	else
+		ret = WM97XX_GPIO_LOW;
+
+	mutex_unlock(&wm->codec_mutex);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(wm97xx_get_gpio);
+
+/**
+ * wm97xx_set_gpio - Set the status of a codec GPIO.
+ * @wm: wm97xx device.
+ * @gpio: gpio
+ *
+ *
+ * Set the status of a codec GPIO pin
+ */
+
+void wm97xx_set_gpio(struct wm97xx *wm, u32 gpio,
+				enum wm97xx_gpio_status status)
+{
+	u16 reg;
+
+	mutex_lock(&wm->codec_mutex);
+	reg = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+
+	if (status == WM97XX_GPIO_HIGH)
+		reg |= gpio;
+	else
+		reg &= ~gpio;
+
+	if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613)
+		wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg << 1);
+	else
+		wm97xx_reg_write(wm, AC97_GPIO_STATUS, reg);
+	mutex_unlock(&wm->codec_mutex);
+}
+EXPORT_SYMBOL_GPL(wm97xx_set_gpio);
+
+/*
+ * Codec GPIO pin configuration, this sets pin direction, polarity,
+ * stickyness and wake up.
+ */
+void wm97xx_config_gpio(struct wm97xx *wm, u32 gpio, enum wm97xx_gpio_dir dir,
+		   enum wm97xx_gpio_pol pol, enum wm97xx_gpio_sticky sticky,
+		   enum wm97xx_gpio_wake wake)
+{
+	u16 reg;
+
+	mutex_lock(&wm->codec_mutex);
+	reg = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+
+	if (pol == WM97XX_GPIO_POL_HIGH)
+		reg |= gpio;
+	else
+		reg &= ~gpio;
+
+	wm97xx_reg_write(wm, AC97_GPIO_POLARITY, reg);
+	reg = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
+
+	if (sticky == WM97XX_GPIO_STICKY)
+		reg |= gpio;
+	else
+		reg &= ~gpio;
+
+	wm97xx_reg_write(wm, AC97_GPIO_STICKY, reg);
+	reg = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
+
+	if (wake == WM97XX_GPIO_WAKE)
+		reg |= gpio;
+	else
+		reg &= ~gpio;
+
+	wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, reg);
+	reg = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+
+	if (dir == WM97XX_GPIO_IN)
+		reg |= gpio;
+	else
+		reg &= ~gpio;
+
+	wm97xx_reg_write(wm, AC97_GPIO_CFG, reg);
+	mutex_unlock(&wm->codec_mutex);
+}
+EXPORT_SYMBOL_GPL(wm97xx_config_gpio);
+
+/*
+ * Configure the WM97XX_PRP value to use while system is suspended.
+ * If a value other than 0 is set then WM97xx pen detection will be
+ * left enabled in the configured mode while the system is in suspend,
+ * the device has users and suspend has not been disabled via the
+ * wakeup sysfs entries.
+ *
+ * @wm:   WM97xx device to configure
+ * @mode: WM97XX_PRP value to configure while suspended
+ */
+void wm97xx_set_suspend_mode(struct wm97xx *wm, u16 mode)
+{
+	wm->suspend_mode = mode;
+	device_init_wakeup(&wm->input_dev->dev, mode != 0);
+}
+EXPORT_SYMBOL_GPL(wm97xx_set_suspend_mode);
+
+/*
+ * Handle a pen down interrupt.
+ */
+static void wm97xx_pen_irq_worker(struct work_struct *work)
+{
+	struct wm97xx *wm = container_of(work, struct wm97xx, pen_event_work);
+	int pen_was_down = wm->pen_is_down;
+
+	/* do we need to enable the touch panel reader */
+	if (wm->id == WM9705_ID2) {
+		if (wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER_RD) &
+					WM97XX_PEN_DOWN)
+			wm->pen_is_down = 1;
+		else
+			wm->pen_is_down = 0;
+	} else {
+		u16 status, pol;
+		mutex_lock(&wm->codec_mutex);
+		status = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+		pol = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+
+		if (WM97XX_GPIO_13 & pol & status) {
+			wm->pen_is_down = 1;
+			wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol &
+						~WM97XX_GPIO_13);
+		} else {
+			wm->pen_is_down = 0;
+			wm97xx_reg_write(wm, AC97_GPIO_POLARITY, pol |
+					 WM97XX_GPIO_13);
+		}
+
+		if (wm->id == WM9712_ID2 && wm->variant != WM97xx_WM1613)
+			wm97xx_reg_write(wm, AC97_GPIO_STATUS, (status &
+						~WM97XX_GPIO_13) << 1);
+		else
+			wm97xx_reg_write(wm, AC97_GPIO_STATUS, status &
+						~WM97XX_GPIO_13);
+		mutex_unlock(&wm->codec_mutex);
+	}
+
+	/* If the system is not using continuous mode or it provides a
+	 * pen down operation then we need to schedule polls while the
+	 * pen is down.  Otherwise the machine driver is responsible
+	 * for scheduling reads.
+	 */
+	if (!wm->mach_ops->acc_enabled || wm->mach_ops->acc_pen_down) {
+		if (wm->pen_is_down && !pen_was_down) {
+			/* Data is not available immediately on pen down */
+			queue_delayed_work(wm->ts_workq, &wm->ts_reader, 1);
+		}
+
+		/* Let ts_reader report the pen up for debounce. */
+		if (!wm->pen_is_down && pen_was_down)
+			wm->pen_is_down = 1;
+	}
+
+	if (!wm->pen_is_down && wm->mach_ops->acc_enabled)
+		wm->mach_ops->acc_pen_up(wm);
+
+	wm->mach_ops->irq_enable(wm, 1);
+}
+
+/*
+ * Codec PENDOWN irq handler
+ *
+ * We have to disable the codec interrupt in the handler because it
+ * can take up to 1ms to clear the interrupt source. We schedule a task
+ * in a work queue to do the actual interaction with the chip.  The
+ * interrupt is then enabled again in the slow handler when the source
+ * has been cleared.
+ */
+static irqreturn_t wm97xx_pen_interrupt(int irq, void *dev_id)
+{
+	struct wm97xx *wm = dev_id;
+
+	if (!work_pending(&wm->pen_event_work)) {
+		wm->mach_ops->irq_enable(wm, 0);
+		queue_work(wm->ts_workq, &wm->pen_event_work);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * initialise pen IRQ handler and workqueue
+ */
+static int wm97xx_init_pen_irq(struct wm97xx *wm)
+{
+	u16 reg;
+
+	/* If an interrupt is supplied an IRQ enable operation must also be
+	 * provided. */
+	BUG_ON(!wm->mach_ops->irq_enable);
+
+	if (request_irq(wm->pen_irq, wm97xx_pen_interrupt, IRQF_SHARED,
+			"wm97xx-pen", wm)) {
+		dev_err(wm->dev,
+			"Failed to register pen down interrupt, polling");
+		wm->pen_irq = 0;
+		return -EINVAL;
+	}
+
+	/* Configure GPIO as interrupt source on WM971x */
+	if (wm->id != WM9705_ID2) {
+		BUG_ON(!wm->mach_ops->irq_gpio);
+		reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
+		wm97xx_reg_write(wm, AC97_MISC_AFE,
+				reg & ~(wm->mach_ops->irq_gpio));
+		reg = wm97xx_reg_read(wm, 0x5a);
+		wm97xx_reg_write(wm, 0x5a, reg & ~0x0001);
+	}
+
+	return 0;
+}
+
+static int wm97xx_read_samples(struct wm97xx *wm)
+{
+	struct wm97xx_data data;
+	int rc;
+
+	mutex_lock(&wm->codec_mutex);
+
+	if (wm->mach_ops && wm->mach_ops->acc_enabled)
+		rc = wm->mach_ops->acc_pen_down(wm);
+	else
+		rc = wm->codec->poll_touch(wm, &data);
+
+	if (rc & RC_PENUP) {
+		if (wm->pen_is_down) {
+			wm->pen_is_down = 0;
+			dev_dbg(wm->dev, "pen up\n");
+			input_report_abs(wm->input_dev, ABS_PRESSURE, 0);
+			input_report_key(wm->input_dev, BTN_TOUCH, 0);
+			input_sync(wm->input_dev);
+		} else if (!(rc & RC_AGAIN)) {
+			/* We need high frequency updates only while
+			* pen is down, the user never will be able to
+			* touch screen faster than a few times per
+			* second... On the other hand, when the user
+			* is actively working with the touchscreen we
+			* don't want to lose the quick response. So we
+			* will slowly increase sleep time after the
+			* pen is up and quicky restore it to ~one task
+			* switch when pen is down again.
+			*/
+			if (wm->ts_reader_interval < HZ / 10)
+				wm->ts_reader_interval++;
+		}
+
+	} else if (rc & RC_VALID) {
+		dev_dbg(wm->dev,
+			"pen down: x=%x:%d, y=%x:%d, pressure=%x:%d\n",
+			data.x >> 12, data.x & 0xfff, data.y >> 12,
+			data.y & 0xfff, data.p >> 12, data.p & 0xfff);
+
+		if (abs_x[0] > (data.x & 0xfff) ||
+		    abs_x[1] < (data.x & 0xfff) ||
+		    abs_y[0] > (data.y & 0xfff) ||
+		    abs_y[1] < (data.y & 0xfff)) {
+			dev_dbg(wm->dev, "Measurement out of range, dropping it\n");
+			rc = RC_AGAIN;
+			goto out;
+		}
+
+		input_report_abs(wm->input_dev, ABS_X, data.x & 0xfff);
+		input_report_abs(wm->input_dev, ABS_Y, data.y & 0xfff);
+		input_report_abs(wm->input_dev, ABS_PRESSURE, data.p & 0xfff);
+		input_report_key(wm->input_dev, BTN_TOUCH, 1);
+		input_sync(wm->input_dev);
+		wm->pen_is_down = 1;
+		wm->ts_reader_interval = wm->ts_reader_min_interval;
+	} else if (rc & RC_PENDOWN) {
+		dev_dbg(wm->dev, "pen down\n");
+		wm->pen_is_down = 1;
+		wm->ts_reader_interval = wm->ts_reader_min_interval;
+	}
+
+out:
+	mutex_unlock(&wm->codec_mutex);
+	return rc;
+}
+
+/*
+* The touchscreen sample reader.
+*/
+static void wm97xx_ts_reader(struct work_struct *work)
+{
+	int rc;
+	struct wm97xx *wm = container_of(work, struct wm97xx, ts_reader.work);
+
+	BUG_ON(!wm->codec);
+
+	do {
+		rc = wm97xx_read_samples(wm);
+	} while (rc & RC_AGAIN);
+
+	if (wm->pen_is_down || !wm->pen_irq)
+		queue_delayed_work(wm->ts_workq, &wm->ts_reader,
+				   wm->ts_reader_interval);
+}
+
+/**
+ * wm97xx_ts_input_open - Open the touch screen input device.
+ * @idev:	Input device to be opened.
+ *
+ * Called by the input sub system to open a wm97xx touchscreen device.
+ * Starts the touchscreen thread and touch digitiser.
+ */
+static int wm97xx_ts_input_open(struct input_dev *idev)
+{
+	struct wm97xx *wm = input_get_drvdata(idev);
+
+	wm->ts_workq = create_singlethread_workqueue("kwm97xx");
+	if (wm->ts_workq == NULL) {
+		dev_err(wm->dev,
+			"Failed to create workqueue\n");
+		return -EINVAL;
+	}
+
+	/* start digitiser */
+	if (wm->mach_ops && wm->mach_ops->acc_enabled)
+		wm->codec->acc_enable(wm, 1);
+	wm->codec->dig_enable(wm, 1);
+
+	INIT_DELAYED_WORK(&wm->ts_reader, wm97xx_ts_reader);
+	INIT_WORK(&wm->pen_event_work, wm97xx_pen_irq_worker);
+
+	wm->ts_reader_min_interval = HZ >= 100 ? HZ / 100 : 1;
+	if (wm->ts_reader_min_interval < 1)
+		wm->ts_reader_min_interval = 1;
+	wm->ts_reader_interval = wm->ts_reader_min_interval;
+
+	wm->pen_is_down = 0;
+	if (wm->pen_irq)
+		wm97xx_init_pen_irq(wm);
+	else
+		dev_err(wm->dev, "No IRQ specified\n");
+
+	/* If we either don't have an interrupt for pen down events or
+	 * failed to acquire it then we need to poll.
+	 */
+	if (wm->pen_irq == 0)
+		queue_delayed_work(wm->ts_workq, &wm->ts_reader,
+				   wm->ts_reader_interval);
+
+	return 0;
+}
+
+/**
+ * wm97xx_ts_input_close - Close the touch screen input device.
+ * @idev:	Input device to be closed.
+ *
+ * Called by the input sub system to close a wm97xx touchscreen
+ * device.  Kills the touchscreen thread and stops the touch
+ * digitiser.
+ */
+
+static void wm97xx_ts_input_close(struct input_dev *idev)
+{
+	struct wm97xx *wm = input_get_drvdata(idev);
+	u16 reg;
+
+	if (wm->pen_irq) {
+		/* Return the interrupt to GPIO usage (disabling it) */
+		if (wm->id != WM9705_ID2) {
+			BUG_ON(!wm->mach_ops->irq_gpio);
+			reg = wm97xx_reg_read(wm, AC97_MISC_AFE);
+			wm97xx_reg_write(wm, AC97_MISC_AFE,
+					 reg | wm->mach_ops->irq_gpio);
+		}
+
+		free_irq(wm->pen_irq, wm);
+	}
+
+	wm->pen_is_down = 0;
+
+	/* Balance out interrupt disables/enables */
+	if (cancel_work_sync(&wm->pen_event_work))
+		wm->mach_ops->irq_enable(wm, 1);
+
+	/* ts_reader rearms itself so we need to explicitly stop it
+	 * before we destroy the workqueue.
+	 */
+	cancel_delayed_work_sync(&wm->ts_reader);
+
+	destroy_workqueue(wm->ts_workq);
+
+	/* stop digitiser */
+	wm->codec->dig_enable(wm, 0);
+	if (wm->mach_ops && wm->mach_ops->acc_enabled)
+		wm->codec->acc_enable(wm, 0);
+}
+
+static int wm97xx_probe(struct device *dev)
+{
+	struct wm97xx *wm;
+	struct wm97xx_pdata *pdata = dev_get_platdata(dev);
+	int ret = 0, id = 0;
+
+	wm = kzalloc(sizeof(struct wm97xx), GFP_KERNEL);
+	if (!wm)
+		return -ENOMEM;
+	mutex_init(&wm->codec_mutex);
+
+	wm->dev = dev;
+	dev_set_drvdata(dev, wm);
+	wm->ac97 = to_ac97_t(dev);
+
+	/* check that we have a supported codec */
+	id = wm97xx_reg_read(wm, AC97_VENDOR_ID1);
+	if (id != WM97XX_ID1) {
+		dev_err(dev, "Device with vendor %04x is not a wm97xx\n", id);
+		ret = -ENODEV;
+		goto alloc_err;
+	}
+
+	wm->id = wm97xx_reg_read(wm, AC97_VENDOR_ID2);
+
+	wm->variant = WM97xx_GENERIC;
+
+	dev_info(wm->dev, "detected a wm97%02x codec\n", wm->id & 0xff);
+
+	switch (wm->id & 0xff) {
+#ifdef CONFIG_TOUCHSCREEN_WM9705
+	case 0x05:
+		wm->codec = &wm9705_codec;
+		break;
+#endif
+#ifdef CONFIG_TOUCHSCREEN_WM9712
+	case 0x12:
+		wm->codec = &wm9712_codec;
+		break;
+#endif
+#ifdef CONFIG_TOUCHSCREEN_WM9713
+	case 0x13:
+		wm->codec = &wm9713_codec;
+		break;
+#endif
+	default:
+		dev_err(wm->dev, "Support for wm97%02x not compiled in.\n",
+			wm->id & 0xff);
+		ret = -ENODEV;
+		goto alloc_err;
+	}
+
+	/* set up physical characteristics */
+	wm->codec->phy_init(wm);
+
+	/* load gpio cache */
+	wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG);
+	wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY);
+	wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY);
+	wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP);
+	wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS);
+	wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE);
+
+	wm->input_dev = input_allocate_device();
+	if (wm->input_dev == NULL) {
+		ret = -ENOMEM;
+		goto alloc_err;
+	}
+
+	/* set up touch configuration */
+	wm->input_dev->name = "wm97xx touchscreen";
+	wm->input_dev->phys = "wm97xx";
+	wm->input_dev->open = wm97xx_ts_input_open;
+	wm->input_dev->close = wm97xx_ts_input_close;
+
+	__set_bit(EV_ABS, wm->input_dev->evbit);
+	__set_bit(EV_KEY, wm->input_dev->evbit);
+	__set_bit(BTN_TOUCH, wm->input_dev->keybit);
+
+	input_set_abs_params(wm->input_dev, ABS_X, abs_x[0], abs_x[1],
+			     abs_x[2], 0);
+	input_set_abs_params(wm->input_dev, ABS_Y, abs_y[0], abs_y[1],
+			     abs_y[2], 0);
+	input_set_abs_params(wm->input_dev, ABS_PRESSURE, abs_p[0], abs_p[1],
+			     abs_p[2], 0);
+
+	input_set_drvdata(wm->input_dev, wm);
+	wm->input_dev->dev.parent = dev;
+
+	ret = input_register_device(wm->input_dev);
+	if (ret < 0)
+		goto dev_alloc_err;
+
+	/* register our battery device */
+	wm->battery_dev = platform_device_alloc("wm97xx-battery", -1);
+	if (!wm->battery_dev) {
+		ret = -ENOMEM;
+		goto batt_err;
+	}
+	platform_set_drvdata(wm->battery_dev, wm);
+	wm->battery_dev->dev.parent = dev;
+	wm->battery_dev->dev.platform_data = pdata;
+	ret = platform_device_add(wm->battery_dev);
+	if (ret < 0)
+		goto batt_reg_err;
+
+	/* register our extended touch device (for machine specific
+	 * extensions) */
+	wm->touch_dev = platform_device_alloc("wm97xx-touch", -1);
+	if (!wm->touch_dev) {
+		ret = -ENOMEM;
+		goto touch_err;
+	}
+	platform_set_drvdata(wm->touch_dev, wm);
+	wm->touch_dev->dev.parent = dev;
+	wm->touch_dev->dev.platform_data = pdata;
+	ret = platform_device_add(wm->touch_dev);
+	if (ret < 0)
+		goto touch_reg_err;
+
+	return ret;
+
+ touch_reg_err:
+	platform_device_put(wm->touch_dev);
+ touch_err:
+	platform_device_del(wm->battery_dev);
+ batt_reg_err:
+	platform_device_put(wm->battery_dev);
+ batt_err:
+	input_unregister_device(wm->input_dev);
+	wm->input_dev = NULL;
+ dev_alloc_err:
+	input_free_device(wm->input_dev);
+ alloc_err:
+	kfree(wm);
+
+	return ret;
+}
+
+static int wm97xx_remove(struct device *dev)
+{
+	struct wm97xx *wm = dev_get_drvdata(dev);
+
+	platform_device_unregister(wm->battery_dev);
+	platform_device_unregister(wm->touch_dev);
+	input_unregister_device(wm->input_dev);
+	kfree(wm);
+
+	return 0;
+}
+
+static int __maybe_unused wm97xx_suspend(struct device *dev)
+{
+	struct wm97xx *wm = dev_get_drvdata(dev);
+	u16 reg;
+	int suspend_mode;
+
+	if (device_may_wakeup(&wm->input_dev->dev))
+		suspend_mode = wm->suspend_mode;
+	else
+		suspend_mode = 0;
+
+	if (wm->input_dev->users)
+		cancel_delayed_work_sync(&wm->ts_reader);
+
+	/* Power down the digitiser (bypassing the cache for resume) */
+	reg = wm97xx_reg_read(wm, AC97_WM97XX_DIGITISER2);
+	reg &= ~WM97XX_PRP_DET_DIG;
+	if (wm->input_dev->users)
+		reg |= suspend_mode;
+	wm->ac97->bus->ops->write(wm->ac97, AC97_WM97XX_DIGITISER2, reg);
+
+	/* WM9713 has an additional power bit - turn it off if there
+	 * are no users or if suspend mode is zero. */
+	if (wm->id == WM9713_ID2 &&
+	    (!wm->input_dev->users || !suspend_mode)) {
+		reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) | 0x8000;
+		wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
+	}
+
+	return 0;
+}
+
+static int __maybe_unused wm97xx_resume(struct device *dev)
+{
+	struct wm97xx *wm = dev_get_drvdata(dev);
+
+	/* restore digitiser and gpios */
+	if (wm->id == WM9713_ID2) {
+		wm97xx_reg_write(wm, AC97_WM9713_DIG1, wm->dig[0]);
+		wm97xx_reg_write(wm, 0x5a, wm->misc);
+		if (wm->input_dev->users) {
+			u16 reg;
+			reg = wm97xx_reg_read(wm, AC97_EXTENDED_MID) & 0x7fff;
+			wm97xx_reg_write(wm, AC97_EXTENDED_MID, reg);
+		}
+	}
+
+	wm97xx_reg_write(wm, AC97_WM9713_DIG2, wm->dig[1]);
+	wm97xx_reg_write(wm, AC97_WM9713_DIG3, wm->dig[2]);
+
+	wm97xx_reg_write(wm, AC97_GPIO_CFG, wm->gpio[0]);
+	wm97xx_reg_write(wm, AC97_GPIO_POLARITY, wm->gpio[1]);
+	wm97xx_reg_write(wm, AC97_GPIO_STICKY, wm->gpio[2]);
+	wm97xx_reg_write(wm, AC97_GPIO_WAKEUP, wm->gpio[3]);
+	wm97xx_reg_write(wm, AC97_GPIO_STATUS, wm->gpio[4]);
+	wm97xx_reg_write(wm, AC97_MISC_AFE, wm->gpio[5]);
+
+	if (wm->input_dev->users && !wm->pen_irq) {
+		wm->ts_reader_interval = wm->ts_reader_min_interval;
+		queue_delayed_work(wm->ts_workq, &wm->ts_reader,
+				   wm->ts_reader_interval);
+	}
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(wm97xx_pm_ops, wm97xx_suspend, wm97xx_resume);
+
+/*
+ * Machine specific operations
+ */
+int wm97xx_register_mach_ops(struct wm97xx *wm,
+			     struct wm97xx_mach_ops *mach_ops)
+{
+	mutex_lock(&wm->codec_mutex);
+	if (wm->mach_ops) {
+		mutex_unlock(&wm->codec_mutex);
+		return -EINVAL;
+	}
+	wm->mach_ops = mach_ops;
+	mutex_unlock(&wm->codec_mutex);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(wm97xx_register_mach_ops);
+
+void wm97xx_unregister_mach_ops(struct wm97xx *wm)
+{
+	mutex_lock(&wm->codec_mutex);
+	wm->mach_ops = NULL;
+	mutex_unlock(&wm->codec_mutex);
+}
+EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops);
+
+static struct device_driver wm97xx_driver = {
+	.name =		"wm97xx-ts",
+	.bus =		&ac97_bus_type,
+	.owner =	THIS_MODULE,
+	.probe =	wm97xx_probe,
+	.remove =	wm97xx_remove,
+	.pm =		&wm97xx_pm_ops,
+};
+
+static int __init wm97xx_init(void)
+{
+	return driver_register(&wm97xx_driver);
+}
+
+static void __exit wm97xx_exit(void)
+{
+	driver_unregister(&wm97xx_driver);
+}
+
+module_init(wm97xx_init);
+module_exit(wm97xx_exit);
+
+/* Module information */
+MODULE_AUTHOR("Liam Girdwood <lrg@slimlogic.co.uk>");
+MODULE_DESCRIPTION("WM97xx Core - Touch Screen / AUX ADC / GPIO Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/zforce_ts.c b/drivers/input/touchscreen/zforce_ts.c
new file mode 100644
index 0000000..7b3845a
--- /dev/null
+++ b/drivers/input/touchscreen/zforce_ts.c
@@ -0,0 +1,964 @@
+/*
+ * Copyright (C) 2012-2013 MundoReader S.L.
+ * Author: Heiko Stuebner <heiko@sntech.de>
+ *
+ * based in parts on Nook zforce driver
+ *
+ * Copyright (C) 2010 Barnes & Noble, Inc.
+ * Author: Pieter Truter<ptruter@intrinsyc.com>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/hrtimer.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/device.h>
+#include <linux/sysfs.h>
+#include <linux/input/mt.h>
+#include <linux/platform_data/zforce_ts.h>
+#include <linux/regulator/consumer.h>
+#include <linux/of.h>
+
+#define WAIT_TIMEOUT		msecs_to_jiffies(1000)
+
+#define FRAME_START		0xee
+#define FRAME_MAXSIZE		257
+
+/* Offsets of the different parts of the payload the controller sends */
+#define PAYLOAD_HEADER		0
+#define PAYLOAD_LENGTH		1
+#define PAYLOAD_BODY		2
+
+/* Response offsets */
+#define RESPONSE_ID		0
+#define RESPONSE_DATA		1
+
+/* Commands */
+#define COMMAND_DEACTIVATE	0x00
+#define COMMAND_INITIALIZE	0x01
+#define COMMAND_RESOLUTION	0x02
+#define COMMAND_SETCONFIG	0x03
+#define COMMAND_DATAREQUEST	0x04
+#define COMMAND_SCANFREQ	0x08
+#define COMMAND_STATUS		0X1e
+
+/*
+ * Responses the controller sends as a result of
+ * command requests
+ */
+#define RESPONSE_DEACTIVATE	0x00
+#define RESPONSE_INITIALIZE	0x01
+#define RESPONSE_RESOLUTION	0x02
+#define RESPONSE_SETCONFIG	0x03
+#define RESPONSE_SCANFREQ	0x08
+#define RESPONSE_STATUS		0X1e
+
+/*
+ * Notifications are sent by the touch controller without
+ * being requested by the driver and include for example
+ * touch indications
+ */
+#define NOTIFICATION_TOUCH		0x04
+#define NOTIFICATION_BOOTCOMPLETE	0x07
+#define NOTIFICATION_OVERRUN		0x25
+#define NOTIFICATION_PROXIMITY		0x26
+#define NOTIFICATION_INVALID_COMMAND	0xfe
+
+#define ZFORCE_REPORT_POINTS		2
+#define ZFORCE_MAX_AREA			0xff
+
+#define STATE_DOWN			0
+#define STATE_MOVE			1
+#define STATE_UP			2
+
+#define SETCONFIG_DUALTOUCH		(1 << 0)
+
+struct zforce_point {
+	int coord_x;
+	int coord_y;
+	int state;
+	int id;
+	int area_major;
+	int area_minor;
+	int orientation;
+	int pressure;
+	int prblty;
+};
+
+/*
+ * @client		the i2c_client
+ * @input		the input device
+ * @suspending		in the process of going to suspend (don't emit wakeup
+ *			events for commands executed to suspend the device)
+ * @suspended		device suspended
+ * @access_mutex	serialize i2c-access, to keep multipart reads together
+ * @command_done	completion to wait for the command result
+ * @command_mutex	serialize commands sent to the ic
+ * @command_waiting	the id of the command that is currently waiting
+ *			for a result
+ * @command_result	returned result of the command
+ */
+struct zforce_ts {
+	struct i2c_client	*client;
+	struct input_dev	*input;
+	const struct zforce_ts_platdata *pdata;
+	char			phys[32];
+
+	struct regulator	*reg_vdd;
+
+	struct gpio_desc	*gpio_int;
+	struct gpio_desc	*gpio_rst;
+
+	bool			suspending;
+	bool			suspended;
+	bool			boot_complete;
+
+	/* Firmware version information */
+	u16			version_major;
+	u16			version_minor;
+	u16			version_build;
+	u16			version_rev;
+
+	struct mutex		access_mutex;
+
+	struct completion	command_done;
+	struct mutex		command_mutex;
+	int			command_waiting;
+	int			command_result;
+};
+
+static int zforce_command(struct zforce_ts *ts, u8 cmd)
+{
+	struct i2c_client *client = ts->client;
+	char buf[3];
+	int ret;
+
+	dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd);
+
+	buf[0] = FRAME_START;
+	buf[1] = 1; /* data size, command only */
+	buf[2] = cmd;
+
+	mutex_lock(&ts->access_mutex);
+	ret = i2c_master_send(client, &buf[0], ARRAY_SIZE(buf));
+	mutex_unlock(&ts->access_mutex);
+	if (ret < 0) {
+		dev_err(&client->dev, "i2c send data request error: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void zforce_reset_assert(struct zforce_ts *ts)
+{
+	gpiod_set_value_cansleep(ts->gpio_rst, 1);
+}
+
+static void zforce_reset_deassert(struct zforce_ts *ts)
+{
+	gpiod_set_value_cansleep(ts->gpio_rst, 0);
+}
+
+static int zforce_send_wait(struct zforce_ts *ts, const char *buf, int len)
+{
+	struct i2c_client *client = ts->client;
+	int ret;
+
+	ret = mutex_trylock(&ts->command_mutex);
+	if (!ret) {
+		dev_err(&client->dev, "already waiting for a command\n");
+		return -EBUSY;
+	}
+
+	dev_dbg(&client->dev, "sending %d bytes for command 0x%x\n",
+		buf[1], buf[2]);
+
+	ts->command_waiting = buf[2];
+
+	mutex_lock(&ts->access_mutex);
+	ret = i2c_master_send(client, buf, len);
+	mutex_unlock(&ts->access_mutex);
+	if (ret < 0) {
+		dev_err(&client->dev, "i2c send data request error: %d\n", ret);
+		goto unlock;
+	}
+
+	dev_dbg(&client->dev, "waiting for result for command 0x%x\n", buf[2]);
+
+	if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0) {
+		ret = -ETIME;
+		goto unlock;
+	}
+
+	ret = ts->command_result;
+
+unlock:
+	mutex_unlock(&ts->command_mutex);
+	return ret;
+}
+
+static int zforce_command_wait(struct zforce_ts *ts, u8 cmd)
+{
+	struct i2c_client *client = ts->client;
+	char buf[3];
+	int ret;
+
+	dev_dbg(&client->dev, "%s: 0x%x\n", __func__, cmd);
+
+	buf[0] = FRAME_START;
+	buf[1] = 1; /* data size, command only */
+	buf[2] = cmd;
+
+	ret = zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
+	if (ret < 0) {
+		dev_err(&client->dev, "i2c send data request error: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int zforce_resolution(struct zforce_ts *ts, u16 x, u16 y)
+{
+	struct i2c_client *client = ts->client;
+	char buf[7] = { FRAME_START, 5, COMMAND_RESOLUTION,
+			(x & 0xff), ((x >> 8) & 0xff),
+			(y & 0xff), ((y >> 8) & 0xff) };
+
+	dev_dbg(&client->dev, "set resolution to (%d,%d)\n", x, y);
+
+	return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
+}
+
+static int zforce_scan_frequency(struct zforce_ts *ts, u16 idle, u16 finger,
+				 u16 stylus)
+{
+	struct i2c_client *client = ts->client;
+	char buf[9] = { FRAME_START, 7, COMMAND_SCANFREQ,
+			(idle & 0xff), ((idle >> 8) & 0xff),
+			(finger & 0xff), ((finger >> 8) & 0xff),
+			(stylus & 0xff), ((stylus >> 8) & 0xff) };
+
+	dev_dbg(&client->dev,
+		"set scan frequency to (idle: %d, finger: %d, stylus: %d)\n",
+		idle, finger, stylus);
+
+	return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
+}
+
+static int zforce_setconfig(struct zforce_ts *ts, char b1)
+{
+	struct i2c_client *client = ts->client;
+	char buf[7] = { FRAME_START, 5, COMMAND_SETCONFIG,
+			b1, 0, 0, 0 };
+
+	dev_dbg(&client->dev, "set config to (%d)\n", b1);
+
+	return zforce_send_wait(ts, &buf[0], ARRAY_SIZE(buf));
+}
+
+static int zforce_start(struct zforce_ts *ts)
+{
+	struct i2c_client *client = ts->client;
+	const struct zforce_ts_platdata *pdata = ts->pdata;
+	int ret;
+
+	dev_dbg(&client->dev, "starting device\n");
+
+	ret = zforce_command_wait(ts, COMMAND_INITIALIZE);
+	if (ret) {
+		dev_err(&client->dev, "Unable to initialize, %d\n", ret);
+		return ret;
+	}
+
+	ret = zforce_resolution(ts, pdata->x_max, pdata->y_max);
+	if (ret) {
+		dev_err(&client->dev, "Unable to set resolution, %d\n", ret);
+		goto error;
+	}
+
+	ret = zforce_scan_frequency(ts, 10, 50, 50);
+	if (ret) {
+		dev_err(&client->dev, "Unable to set scan frequency, %d\n",
+			ret);
+		goto error;
+	}
+
+	ret = zforce_setconfig(ts, SETCONFIG_DUALTOUCH);
+	if (ret) {
+		dev_err(&client->dev, "Unable to set config\n");
+		goto error;
+	}
+
+	/* start sending touch events */
+	ret = zforce_command(ts, COMMAND_DATAREQUEST);
+	if (ret) {
+		dev_err(&client->dev, "Unable to request data\n");
+		goto error;
+	}
+
+	/*
+	 * Per NN, initial cal. take max. of 200msec.
+	 * Allow time to complete this calibration
+	 */
+	msleep(200);
+
+	return 0;
+
+error:
+	zforce_command_wait(ts, COMMAND_DEACTIVATE);
+	return ret;
+}
+
+static int zforce_stop(struct zforce_ts *ts)
+{
+	struct i2c_client *client = ts->client;
+	int ret;
+
+	dev_dbg(&client->dev, "stopping device\n");
+
+	/* Deactivates touch sensing and puts the device into sleep. */
+	ret = zforce_command_wait(ts, COMMAND_DEACTIVATE);
+	if (ret != 0) {
+		dev_err(&client->dev, "could not deactivate device, %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int zforce_touch_event(struct zforce_ts *ts, u8 *payload)
+{
+	struct i2c_client *client = ts->client;
+	const struct zforce_ts_platdata *pdata = ts->pdata;
+	struct zforce_point point;
+	int count, i, num = 0;
+
+	count = payload[0];
+	if (count > ZFORCE_REPORT_POINTS) {
+		dev_warn(&client->dev,
+			 "too many coordinates %d, expected max %d\n",
+			 count, ZFORCE_REPORT_POINTS);
+		count = ZFORCE_REPORT_POINTS;
+	}
+
+	for (i = 0; i < count; i++) {
+		point.coord_x =
+			payload[9 * i + 2] << 8 | payload[9 * i + 1];
+		point.coord_y =
+			payload[9 * i + 4] << 8 | payload[9 * i + 3];
+
+		if (point.coord_x > pdata->x_max ||
+		    point.coord_y > pdata->y_max) {
+			dev_warn(&client->dev, "coordinates (%d,%d) invalid\n",
+				point.coord_x, point.coord_y);
+			point.coord_x = point.coord_y = 0;
+		}
+
+		point.state = payload[9 * i + 5] & 0x0f;
+		point.id = (payload[9 * i + 5] & 0xf0) >> 4;
+
+		/* determine touch major, minor and orientation */
+		point.area_major = max(payload[9 * i + 6],
+					  payload[9 * i + 7]);
+		point.area_minor = min(payload[9 * i + 6],
+					  payload[9 * i + 7]);
+		point.orientation = payload[9 * i + 6] > payload[9 * i + 7];
+
+		point.pressure = payload[9 * i + 8];
+		point.prblty = payload[9 * i + 9];
+
+		dev_dbg(&client->dev,
+			"point %d/%d: state %d, id %d, pressure %d, prblty %d, x %d, y %d, amajor %d, aminor %d, ori %d\n",
+			i, count, point.state, point.id,
+			point.pressure, point.prblty,
+			point.coord_x, point.coord_y,
+			point.area_major, point.area_minor,
+			point.orientation);
+
+		/* the zforce id starts with "1", so needs to be decreased */
+		input_mt_slot(ts->input, point.id - 1);
+
+		input_mt_report_slot_state(ts->input, MT_TOOL_FINGER,
+						point.state != STATE_UP);
+
+		if (point.state != STATE_UP) {
+			input_report_abs(ts->input, ABS_MT_POSITION_X,
+					 point.coord_x);
+			input_report_abs(ts->input, ABS_MT_POSITION_Y,
+					 point.coord_y);
+			input_report_abs(ts->input, ABS_MT_TOUCH_MAJOR,
+					 point.area_major);
+			input_report_abs(ts->input, ABS_MT_TOUCH_MINOR,
+					 point.area_minor);
+			input_report_abs(ts->input, ABS_MT_ORIENTATION,
+					 point.orientation);
+			num++;
+		}
+	}
+
+	input_mt_sync_frame(ts->input);
+
+	input_mt_report_finger_count(ts->input, num);
+
+	input_sync(ts->input);
+
+	return 0;
+}
+
+static int zforce_read_packet(struct zforce_ts *ts, u8 *buf)
+{
+	struct i2c_client *client = ts->client;
+	int ret;
+
+	mutex_lock(&ts->access_mutex);
+
+	/* read 2 byte message header */
+	ret = i2c_master_recv(client, buf, 2);
+	if (ret < 0) {
+		dev_err(&client->dev, "error reading header: %d\n", ret);
+		goto unlock;
+	}
+
+	if (buf[PAYLOAD_HEADER] != FRAME_START) {
+		dev_err(&client->dev, "invalid frame start: %d\n", buf[0]);
+		ret = -EIO;
+		goto unlock;
+	}
+
+	if (buf[PAYLOAD_LENGTH] == 0) {
+		dev_err(&client->dev, "invalid payload length: %d\n",
+			buf[PAYLOAD_LENGTH]);
+		ret = -EIO;
+		goto unlock;
+	}
+
+	/* read the message */
+	ret = i2c_master_recv(client, &buf[PAYLOAD_BODY], buf[PAYLOAD_LENGTH]);
+	if (ret < 0) {
+		dev_err(&client->dev, "error reading payload: %d\n", ret);
+		goto unlock;
+	}
+
+	dev_dbg(&client->dev, "read %d bytes for response command 0x%x\n",
+		buf[PAYLOAD_LENGTH], buf[PAYLOAD_BODY]);
+
+unlock:
+	mutex_unlock(&ts->access_mutex);
+	return ret;
+}
+
+static void zforce_complete(struct zforce_ts *ts, int cmd, int result)
+{
+	struct i2c_client *client = ts->client;
+
+	if (ts->command_waiting == cmd) {
+		dev_dbg(&client->dev, "completing command 0x%x\n", cmd);
+		ts->command_result = result;
+		complete(&ts->command_done);
+	} else {
+		dev_dbg(&client->dev, "command %d not for us\n", cmd);
+	}
+}
+
+static irqreturn_t zforce_irq(int irq, void *dev_id)
+{
+	struct zforce_ts *ts = dev_id;
+	struct i2c_client *client = ts->client;
+
+	if (ts->suspended && device_may_wakeup(&client->dev))
+		pm_wakeup_event(&client->dev, 500);
+
+	return IRQ_WAKE_THREAD;
+}
+
+static irqreturn_t zforce_irq_thread(int irq, void *dev_id)
+{
+	struct zforce_ts *ts = dev_id;
+	struct i2c_client *client = ts->client;
+	int ret;
+	u8 payload_buffer[FRAME_MAXSIZE];
+	u8 *payload;
+
+	/*
+	 * When still suspended, return.
+	 * Due to the level-interrupt we will get re-triggered later.
+	 */
+	if (ts->suspended) {
+		msleep(20);
+		return IRQ_HANDLED;
+	}
+
+	dev_dbg(&client->dev, "handling interrupt\n");
+
+	/* Don't emit wakeup events from commands run by zforce_suspend */
+	if (!ts->suspending && device_may_wakeup(&client->dev))
+		pm_stay_awake(&client->dev);
+
+	/*
+	 * Run at least once and exit the loop if
+	 * - the optional interrupt GPIO isn't specified
+	 *   (there is only one packet read per ISR invocation, then)
+	 * or
+	 * - the GPIO isn't active any more
+	 *   (packet read until the level GPIO indicates that there is
+	 *    no IRQ any more)
+	 */
+	do {
+		ret = zforce_read_packet(ts, payload_buffer);
+		if (ret < 0) {
+			dev_err(&client->dev,
+				"could not read packet, ret: %d\n", ret);
+			break;
+		}
+
+		payload =  &payload_buffer[PAYLOAD_BODY];
+
+		switch (payload[RESPONSE_ID]) {
+		case NOTIFICATION_TOUCH:
+			/*
+			 * Always report touch-events received while
+			 * suspending, when being a wakeup source
+			 */
+			if (ts->suspending && device_may_wakeup(&client->dev))
+				pm_wakeup_event(&client->dev, 500);
+			zforce_touch_event(ts, &payload[RESPONSE_DATA]);
+			break;
+
+		case NOTIFICATION_BOOTCOMPLETE:
+			ts->boot_complete = payload[RESPONSE_DATA];
+			zforce_complete(ts, payload[RESPONSE_ID], 0);
+			break;
+
+		case RESPONSE_INITIALIZE:
+		case RESPONSE_DEACTIVATE:
+		case RESPONSE_SETCONFIG:
+		case RESPONSE_RESOLUTION:
+		case RESPONSE_SCANFREQ:
+			zforce_complete(ts, payload[RESPONSE_ID],
+					payload[RESPONSE_DATA]);
+			break;
+
+		case RESPONSE_STATUS:
+			/*
+			 * Version Payload Results
+			 * [2:major] [2:minor] [2:build] [2:rev]
+			 */
+			ts->version_major = (payload[RESPONSE_DATA + 1] << 8) |
+						payload[RESPONSE_DATA];
+			ts->version_minor = (payload[RESPONSE_DATA + 3] << 8) |
+						payload[RESPONSE_DATA + 2];
+			ts->version_build = (payload[RESPONSE_DATA + 5] << 8) |
+						payload[RESPONSE_DATA + 4];
+			ts->version_rev   = (payload[RESPONSE_DATA + 7] << 8) |
+						payload[RESPONSE_DATA + 6];
+			dev_dbg(&ts->client->dev,
+				"Firmware Version %04x:%04x %04x:%04x\n",
+				ts->version_major, ts->version_minor,
+				ts->version_build, ts->version_rev);
+
+			zforce_complete(ts, payload[RESPONSE_ID], 0);
+			break;
+
+		case NOTIFICATION_INVALID_COMMAND:
+			dev_err(&ts->client->dev, "invalid command: 0x%x\n",
+				payload[RESPONSE_DATA]);
+			break;
+
+		default:
+			dev_err(&ts->client->dev,
+				"unrecognized response id: 0x%x\n",
+				payload[RESPONSE_ID]);
+			break;
+		}
+	} while (gpiod_get_value_cansleep(ts->gpio_int));
+
+	if (!ts->suspending && device_may_wakeup(&client->dev))
+		pm_relax(&client->dev);
+
+	dev_dbg(&client->dev, "finished interrupt\n");
+
+	return IRQ_HANDLED;
+}
+
+static int zforce_input_open(struct input_dev *dev)
+{
+	struct zforce_ts *ts = input_get_drvdata(dev);
+
+	return zforce_start(ts);
+}
+
+static void zforce_input_close(struct input_dev *dev)
+{
+	struct zforce_ts *ts = input_get_drvdata(dev);
+	struct i2c_client *client = ts->client;
+	int ret;
+
+	ret = zforce_stop(ts);
+	if (ret)
+		dev_warn(&client->dev, "stopping zforce failed\n");
+
+	return;
+}
+
+static int __maybe_unused zforce_suspend(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct zforce_ts *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
+	ts->suspending = true;
+
+	/*
+	 * When configured as a wakeup source device should always wake
+	 * the system, therefore start device if necessary.
+	 */
+	if (device_may_wakeup(&client->dev)) {
+		dev_dbg(&client->dev, "suspend while being a wakeup source\n");
+
+		/* Need to start device, if not open, to be a wakeup source. */
+		if (!input->users) {
+			ret = zforce_start(ts);
+			if (ret)
+				goto unlock;
+		}
+
+		enable_irq_wake(client->irq);
+	} else if (input->users) {
+		dev_dbg(&client->dev,
+			"suspend without being a wakeup source\n");
+
+		ret = zforce_stop(ts);
+		if (ret)
+			goto unlock;
+
+		disable_irq(client->irq);
+	}
+
+	ts->suspended = true;
+
+unlock:
+	ts->suspending = false;
+	mutex_unlock(&input->mutex);
+
+	return ret;
+}
+
+static int __maybe_unused zforce_resume(struct device *dev)
+{
+	struct i2c_client *client = to_i2c_client(dev);
+	struct zforce_ts *ts = i2c_get_clientdata(client);
+	struct input_dev *input = ts->input;
+	int ret = 0;
+
+	mutex_lock(&input->mutex);
+
+	ts->suspended = false;
+
+	if (device_may_wakeup(&client->dev)) {
+		dev_dbg(&client->dev, "resume from being a wakeup source\n");
+
+		disable_irq_wake(client->irq);
+
+		/* need to stop device if it was not open on suspend */
+		if (!input->users) {
+			ret = zforce_stop(ts);
+			if (ret)
+				goto unlock;
+		}
+	} else if (input->users) {
+		dev_dbg(&client->dev, "resume without being a wakeup source\n");
+
+		enable_irq(client->irq);
+
+		ret = zforce_start(ts);
+		if (ret < 0)
+			goto unlock;
+	}
+
+unlock:
+	mutex_unlock(&input->mutex);
+
+	return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(zforce_pm_ops, zforce_suspend, zforce_resume);
+
+static void zforce_reset(void *data)
+{
+	struct zforce_ts *ts = data;
+
+	zforce_reset_assert(ts);
+
+	udelay(10);
+
+	if (!IS_ERR(ts->reg_vdd))
+		regulator_disable(ts->reg_vdd);
+}
+
+static struct zforce_ts_platdata *zforce_parse_dt(struct device *dev)
+{
+	struct zforce_ts_platdata *pdata;
+	struct device_node *np = dev->of_node;
+
+	if (!np)
+		return ERR_PTR(-ENOENT);
+
+	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+	if (!pdata) {
+		dev_err(dev, "failed to allocate platform data\n");
+		return ERR_PTR(-ENOMEM);
+	}
+
+	if (of_property_read_u32(np, "x-size", &pdata->x_max)) {
+		dev_err(dev, "failed to get x-size property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	if (of_property_read_u32(np, "y-size", &pdata->y_max)) {
+		dev_err(dev, "failed to get y-size property\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	return pdata;
+}
+
+static int zforce_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	const struct zforce_ts_platdata *pdata = dev_get_platdata(&client->dev);
+	struct zforce_ts *ts;
+	struct input_dev *input_dev;
+	int ret;
+
+	if (!pdata) {
+		pdata = zforce_parse_dt(&client->dev);
+		if (IS_ERR(pdata))
+			return PTR_ERR(pdata);
+	}
+
+	ts = devm_kzalloc(&client->dev, sizeof(struct zforce_ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	ts->gpio_rst = devm_gpiod_get_optional(&client->dev, "reset",
+					       GPIOD_OUT_HIGH);
+	if (IS_ERR(ts->gpio_rst)) {
+		ret = PTR_ERR(ts->gpio_rst);
+		dev_err(&client->dev,
+			"failed to request reset GPIO: %d\n", ret);
+		return ret;
+	}
+
+	if (ts->gpio_rst) {
+		ts->gpio_int = devm_gpiod_get_optional(&client->dev, "irq",
+						       GPIOD_IN);
+		if (IS_ERR(ts->gpio_int)) {
+			ret = PTR_ERR(ts->gpio_int);
+			dev_err(&client->dev,
+				"failed to request interrupt GPIO: %d\n", ret);
+			return ret;
+		}
+	} else {
+		/*
+		 * Deprecated GPIO handling for compatibility
+		 * with legacy binding.
+		 */
+
+		/* INT GPIO */
+		ts->gpio_int = devm_gpiod_get_index(&client->dev, NULL, 0,
+						    GPIOD_IN);
+		if (IS_ERR(ts->gpio_int)) {
+			ret = PTR_ERR(ts->gpio_int);
+			dev_err(&client->dev,
+				"failed to request interrupt GPIO: %d\n", ret);
+			return ret;
+		}
+
+		/* RST GPIO */
+		ts->gpio_rst = devm_gpiod_get_index(&client->dev, NULL, 1,
+					    GPIOD_OUT_HIGH);
+		if (IS_ERR(ts->gpio_rst)) {
+			ret = PTR_ERR(ts->gpio_rst);
+			dev_err(&client->dev,
+				"failed to request reset GPIO: %d\n", ret);
+			return ret;
+		}
+	}
+
+	ts->reg_vdd = devm_regulator_get_optional(&client->dev, "vdd");
+	if (IS_ERR(ts->reg_vdd)) {
+		ret = PTR_ERR(ts->reg_vdd);
+		if (ret == -EPROBE_DEFER)
+			return ret;
+	} else {
+		ret = regulator_enable(ts->reg_vdd);
+		if (ret)
+			return ret;
+
+		/*
+		 * according to datasheet add 100us grace time after regular
+		 * regulator enable delay.
+		 */
+		udelay(100);
+	}
+
+	ret = devm_add_action(&client->dev, zforce_reset, ts);
+	if (ret) {
+		dev_err(&client->dev, "failed to register reset action, %d\n",
+			ret);
+
+		/* hereafter the regulator will be disabled by the action */
+		if (!IS_ERR(ts->reg_vdd))
+			regulator_disable(ts->reg_vdd);
+
+		return ret;
+	}
+
+	snprintf(ts->phys, sizeof(ts->phys),
+		 "%s/input0", dev_name(&client->dev));
+
+	input_dev = devm_input_allocate_device(&client->dev);
+	if (!input_dev) {
+		dev_err(&client->dev, "could not allocate input device\n");
+		return -ENOMEM;
+	}
+
+	mutex_init(&ts->access_mutex);
+	mutex_init(&ts->command_mutex);
+
+	ts->pdata = pdata;
+	ts->client = client;
+	ts->input = input_dev;
+
+	input_dev->name = "Neonode zForce touchscreen";
+	input_dev->phys = ts->phys;
+	input_dev->id.bustype = BUS_I2C;
+
+	input_dev->open = zforce_input_open;
+	input_dev->close = zforce_input_close;
+
+	__set_bit(EV_KEY, input_dev->evbit);
+	__set_bit(EV_SYN, input_dev->evbit);
+	__set_bit(EV_ABS, input_dev->evbit);
+
+	/* For multi touch */
+	input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
+			     pdata->x_max, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
+			     pdata->y_max, 0, 0);
+
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0,
+			     ZFORCE_MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0,
+			     ZFORCE_MAX_AREA, 0, 0);
+	input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
+	input_mt_init_slots(input_dev, ZFORCE_REPORT_POINTS, INPUT_MT_DIRECT);
+
+	input_set_drvdata(ts->input, ts);
+
+	init_completion(&ts->command_done);
+
+	/*
+	 * The zforce pulls the interrupt low when it has data ready.
+	 * After it is triggered the isr thread runs until all the available
+	 * packets have been read and the interrupt is high again.
+	 * Therefore we can trigger the interrupt anytime it is low and do
+	 * not need to limit it to the interrupt edge.
+	 */
+	ret = devm_request_threaded_irq(&client->dev, client->irq,
+					zforce_irq, zforce_irq_thread,
+					IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+					input_dev->name, ts);
+	if (ret) {
+		dev_err(&client->dev, "irq %d request failed\n", client->irq);
+		return ret;
+	}
+
+	i2c_set_clientdata(client, ts);
+
+	/* let the controller boot */
+	zforce_reset_deassert(ts);
+
+	ts->command_waiting = NOTIFICATION_BOOTCOMPLETE;
+	if (wait_for_completion_timeout(&ts->command_done, WAIT_TIMEOUT) == 0)
+		dev_warn(&client->dev, "bootcomplete timed out\n");
+
+	/* need to start device to get version information */
+	ret = zforce_command_wait(ts, COMMAND_INITIALIZE);
+	if (ret) {
+		dev_err(&client->dev, "unable to initialize, %d\n", ret);
+		return ret;
+	}
+
+	/* this gets the firmware version among other information */
+	ret = zforce_command_wait(ts, COMMAND_STATUS);
+	if (ret < 0) {
+		dev_err(&client->dev, "couldn't get status, %d\n", ret);
+		zforce_stop(ts);
+		return ret;
+	}
+
+	/* stop device and put it into sleep until it is opened */
+	ret = zforce_stop(ts);
+	if (ret < 0)
+		return ret;
+
+	device_set_wakeup_capable(&client->dev, true);
+
+	ret = input_register_device(input_dev);
+	if (ret) {
+		dev_err(&client->dev, "could not register input device, %d\n",
+			ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static struct i2c_device_id zforce_idtable[] = {
+	{ "zforce-ts", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, zforce_idtable);
+
+#ifdef CONFIG_OF
+static const struct of_device_id zforce_dt_idtable[] = {
+	{ .compatible = "neonode,zforce" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, zforce_dt_idtable);
+#endif
+
+static struct i2c_driver zforce_driver = {
+	.driver = {
+		.name	= "zforce-ts",
+		.pm	= &zforce_pm_ops,
+		.of_match_table	= of_match_ptr(zforce_dt_idtable),
+	},
+	.probe		= zforce_probe,
+	.id_table	= zforce_idtable,
+};
+
+module_i2c_driver(zforce_driver);
+
+MODULE_AUTHOR("Heiko Stuebner <heiko@sntech.de>");
+MODULE_DESCRIPTION("zForce TouchScreen Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/input/touchscreen/zylonite-wm97xx.c b/drivers/input/touchscreen/zylonite-wm97xx.c
new file mode 100644
index 0000000..e2ccd68
--- /dev/null
+++ b/drivers/input/touchscreen/zylonite-wm97xx.c
@@ -0,0 +1,231 @@
+/*
+ * zylonite-wm97xx.c  --  Zylonite Continuous Touch screen driver
+ *
+ * Copyright 2004, 2007, 2008 Wolfson Microelectronics PLC.
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ * Parts Copyright : Ian Molton <spyro@f2s.com>
+ *                   Andrew Zabolotny <zap@homelink.ru>
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ * Notes:
+ *     This is a wm97xx extended touch driver supporting interrupt driven
+ *     and continuous operation on Marvell Zylonite development systems
+ *     (which have a WM9713 on board).
+ */
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/wm97xx.h>
+
+#include <mach/hardware.h>
+#include <mach/mfp.h>
+#include <mach/regs-ac97.h>
+
+struct continuous {
+	u16 id;    /* codec id */
+	u8 code;   /* continuous code */
+	u8 reads;  /* number of coord reads per read cycle */
+	u32 speed; /* number of coords per second */
+};
+
+#define WM_READS(sp) ((sp / HZ) + 1)
+
+static const struct continuous cinfo[] = {
+	{ WM9713_ID2, 0, WM_READS(94),  94  },
+	{ WM9713_ID2, 1, WM_READS(120), 120 },
+	{ WM9713_ID2, 2, WM_READS(154), 154 },
+	{ WM9713_ID2, 3, WM_READS(188), 188 },
+};
+
+/* continuous speed index */
+static int sp_idx;
+
+/*
+ * Pen sampling frequency (Hz) in continuous mode.
+ */
+static int cont_rate = 200;
+module_param(cont_rate, int, 0);
+MODULE_PARM_DESC(cont_rate, "Sampling rate in continuous mode (Hz)");
+
+/*
+ * Pressure readback.
+ *
+ * Set to 1 to read back pen down pressure
+ */
+static int pressure;
+module_param(pressure, int, 0);
+MODULE_PARM_DESC(pressure, "Pressure readback (1 = pressure, 0 = no pressure)");
+
+/*
+ * AC97 touch data slot.
+ *
+ * Touch screen readback data ac97 slot
+ */
+static int ac97_touch_slot = 5;
+module_param(ac97_touch_slot, int, 0);
+MODULE_PARM_DESC(ac97_touch_slot, "Touch screen data slot AC97 number");
+
+
+/* flush AC97 slot 5 FIFO machines */
+static void wm97xx_acc_pen_up(struct wm97xx *wm)
+{
+	int i;
+
+	msleep(1);
+
+	for (i = 0; i < 16; i++)
+		MODR;
+}
+
+static int wm97xx_acc_pen_down(struct wm97xx *wm)
+{
+	u16 x, y, p = 0x100 | WM97XX_ADCSEL_PRES;
+	int reads = 0;
+	static u16 last, tries;
+
+	/* When the AC97 queue has been drained we need to allow time
+	 * to buffer up samples otherwise we end up spinning polling
+	 * for samples.  The controller can't have a suitably low
+	 * threshold set to use the notifications it gives.
+	 */
+	msleep(1);
+
+	if (tries > 5) {
+		tries = 0;
+		return RC_PENUP;
+	}
+
+	x = MODR;
+	if (x == last) {
+		tries++;
+		return RC_AGAIN;
+	}
+	last = x;
+	do {
+		if (reads)
+			x = MODR;
+		y = MODR;
+		if (pressure)
+			p = MODR;
+
+		dev_dbg(wm->dev, "Raw coordinates: x=%x, y=%x, p=%x\n",
+			x, y, p);
+
+		/* are samples valid */
+		if ((x & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_X ||
+		    (y & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_Y ||
+		    (p & WM97XX_ADCSEL_MASK) != WM97XX_ADCSEL_PRES)
+			goto up;
+
+		/* coordinate is good */
+		tries = 0;
+		input_report_abs(wm->input_dev, ABS_X, x & 0xfff);
+		input_report_abs(wm->input_dev, ABS_Y, y & 0xfff);
+		input_report_abs(wm->input_dev, ABS_PRESSURE, p & 0xfff);
+		input_report_key(wm->input_dev, BTN_TOUCH, (p != 0));
+		input_sync(wm->input_dev);
+		reads++;
+	} while (reads < cinfo[sp_idx].reads);
+up:
+	return RC_PENDOWN | RC_AGAIN;
+}
+
+static int wm97xx_acc_startup(struct wm97xx *wm)
+{
+	int idx;
+
+	/* check we have a codec */
+	if (wm->ac97 == NULL)
+		return -ENODEV;
+
+	/* Go you big red fire engine */
+	for (idx = 0; idx < ARRAY_SIZE(cinfo); idx++) {
+		if (wm->id != cinfo[idx].id)
+			continue;
+		sp_idx = idx;
+		if (cont_rate <= cinfo[idx].speed)
+			break;
+	}
+	wm->acc_rate = cinfo[sp_idx].code;
+	wm->acc_slot = ac97_touch_slot;
+	dev_info(wm->dev,
+		 "zylonite accelerated touchscreen driver, %d samples/sec\n",
+		 cinfo[sp_idx].speed);
+
+	return 0;
+}
+
+static void wm97xx_irq_enable(struct wm97xx *wm, int enable)
+{
+	if (enable)
+		enable_irq(wm->pen_irq);
+	else
+		disable_irq_nosync(wm->pen_irq);
+}
+
+static struct wm97xx_mach_ops zylonite_mach_ops = {
+	.acc_enabled	= 1,
+	.acc_pen_up	= wm97xx_acc_pen_up,
+	.acc_pen_down	= wm97xx_acc_pen_down,
+	.acc_startup	= wm97xx_acc_startup,
+	.irq_enable	= wm97xx_irq_enable,
+	.irq_gpio	= WM97XX_GPIO_2,
+};
+
+static int zylonite_wm97xx_probe(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+	int gpio_touch_irq;
+
+	if (cpu_is_pxa320())
+		gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO15);
+	else
+		gpio_touch_irq = mfp_to_gpio(MFP_PIN_GPIO26);
+
+	wm->pen_irq = gpio_to_irq(gpio_touch_irq);
+	irq_set_irq_type(wm->pen_irq, IRQ_TYPE_EDGE_BOTH);
+
+	wm97xx_config_gpio(wm, WM97XX_GPIO_13, WM97XX_GPIO_IN,
+			   WM97XX_GPIO_POL_HIGH,
+			   WM97XX_GPIO_STICKY,
+			   WM97XX_GPIO_WAKE);
+	wm97xx_config_gpio(wm, WM97XX_GPIO_2, WM97XX_GPIO_OUT,
+			   WM97XX_GPIO_POL_HIGH,
+			   WM97XX_GPIO_NOTSTICKY,
+			   WM97XX_GPIO_NOWAKE);
+
+	return wm97xx_register_mach_ops(wm, &zylonite_mach_ops);
+}
+
+static int zylonite_wm97xx_remove(struct platform_device *pdev)
+{
+	struct wm97xx *wm = platform_get_drvdata(pdev);
+
+	wm97xx_unregister_mach_ops(wm);
+
+	return 0;
+}
+
+static struct platform_driver zylonite_wm97xx_driver = {
+	.probe	= zylonite_wm97xx_probe,
+	.remove	= zylonite_wm97xx_remove,
+	.driver	= {
+		.name	= "wm97xx-touch",
+	},
+};
+module_platform_driver(zylonite_wm97xx_driver);
+
+/* Module information */
+MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+MODULE_DESCRIPTION("wm97xx continuous touch driver for Zylonite");
+MODULE_LICENSE("GPL");