File-copy from v4.4.100

This is the result of 'cp' from a linux-stable tree with the 'v4.4.100'
tag checked out (commit 26d6298789e695c9f627ce49a7bbd2286405798a) on
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git

Please refer to that tree for all history prior to this point.

Change-Id: I8a9ee2aea93cd29c52c847d0ce33091a73ae6afe
diff --git a/drivers/media/platform/davinci/isif.c b/drivers/media/platform/davinci/isif.c
new file mode 100644
index 0000000..99faea2
--- /dev/null
+++ b/drivers/media/platform/davinci/isif.c
@@ -0,0 +1,1144 @@
+/*
+ * Copyright (C) 2008-2009 Texas Instruments Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * Image Sensor Interface (ISIF) driver
+ *
+ * This driver is for configuring the ISIF IP available on DM365 or any other
+ * TI SoCs. This is used for capturing yuv or bayer video or image data
+ * from a decoder or sensor. This IP is similar to the CCDC IP on DM355
+ * and DM6446, but with enhanced or additional ip blocks. The driver
+ * configures the ISIF upon commands from the vpfe bridge driver through
+ * ccdc_hw_device interface.
+ *
+ * TODO: 1) Raw bayer parameter settings and bayer capture
+ *	 2) Add support for control ioctl
+ */
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
+#include <linux/videodev2.h>
+#include <linux/err.h>
+#include <linux/module.h>
+
+#include <mach/mux.h>
+
+#include <media/davinci/isif.h>
+#include <media/davinci/vpss.h>
+
+#include "isif_regs.h"
+#include "ccdc_hw_device.h"
+
+/* Defaults for module configuration parameters */
+static struct isif_config_params_raw isif_config_defaults = {
+	.linearize = {
+		.en = 0,
+		.corr_shft = ISIF_NO_SHIFT,
+		.scale_fact = {1, 0},
+	},
+	.df_csc = {
+		.df_or_csc = 0,
+		.csc = {
+			.en = 0,
+		},
+	},
+	.dfc = {
+		.en = 0,
+	},
+	.bclamp = {
+		.en = 0,
+	},
+	.gain_offset = {
+		.gain = {
+			.r_ye = {1, 0},
+			.gr_cy = {1, 0},
+			.gb_g = {1, 0},
+			.b_mg = {1, 0},
+		},
+	},
+	.culling = {
+		.hcpat_odd = 0xff,
+		.hcpat_even = 0xff,
+		.vcpat = 0xff,
+	},
+	.compress = {
+		.alg = ISIF_ALAW,
+	},
+};
+
+/* ISIF operation configuration */
+static struct isif_oper_config {
+	struct device *dev;
+	enum vpfe_hw_if_type if_type;
+	struct isif_ycbcr_config ycbcr;
+	struct isif_params_raw bayer;
+	enum isif_data_pack data_pack;
+	/* ISIF base address */
+	void __iomem *base_addr;
+	/* ISIF Linear Table 0 */
+	void __iomem *linear_tbl0_addr;
+	/* ISIF Linear Table 1 */
+	void __iomem *linear_tbl1_addr;
+} isif_cfg = {
+	.ycbcr = {
+		.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT,
+		.frm_fmt = CCDC_FRMFMT_INTERLACED,
+		.win = ISIF_WIN_NTSC,
+		.fid_pol = VPFE_PINPOL_POSITIVE,
+		.vd_pol = VPFE_PINPOL_POSITIVE,
+		.hd_pol = VPFE_PINPOL_POSITIVE,
+		.pix_order = CCDC_PIXORDER_CBYCRY,
+		.buf_type = CCDC_BUFTYPE_FLD_INTERLEAVED,
+	},
+	.bayer = {
+		.pix_fmt = CCDC_PIXFMT_RAW,
+		.frm_fmt = CCDC_FRMFMT_PROGRESSIVE,
+		.win = ISIF_WIN_VGA,
+		.fid_pol = VPFE_PINPOL_POSITIVE,
+		.vd_pol = VPFE_PINPOL_POSITIVE,
+		.hd_pol = VPFE_PINPOL_POSITIVE,
+		.gain = {
+			.r_ye = {1, 0},
+			.gr_cy = {1, 0},
+			.gb_g = {1, 0},
+			.b_mg = {1, 0},
+		},
+		.cfa_pat = ISIF_CFA_PAT_MOSAIC,
+		.data_msb = ISIF_BIT_MSB_11,
+		.config_params = {
+			.data_shift = ISIF_NO_SHIFT,
+			.col_pat_field0 = {
+				.olop = ISIF_GREEN_BLUE,
+				.olep = ISIF_BLUE,
+				.elop = ISIF_RED,
+				.elep = ISIF_GREEN_RED,
+			},
+			.col_pat_field1 = {
+				.olop = ISIF_GREEN_BLUE,
+				.olep = ISIF_BLUE,
+				.elop = ISIF_RED,
+				.elep = ISIF_GREEN_RED,
+			},
+			.test_pat_gen = 0,
+		},
+	},
+	.data_pack = ISIF_DATA_PACK8,
+};
+
+/* Raw Bayer formats */
+static const u32 isif_raw_bayer_pix_formats[] = {
+	V4L2_PIX_FMT_SBGGR8, V4L2_PIX_FMT_SBGGR16};
+
+/* Raw YUV formats */
+static const u32 isif_raw_yuv_pix_formats[] = {
+	V4L2_PIX_FMT_UYVY, V4L2_PIX_FMT_YUYV};
+
+/* register access routines */
+static inline u32 regr(u32 offset)
+{
+	return __raw_readl(isif_cfg.base_addr + offset);
+}
+
+static inline void regw(u32 val, u32 offset)
+{
+	__raw_writel(val, isif_cfg.base_addr + offset);
+}
+
+/* reg_modify() - read, modify and write register */
+static inline u32 reg_modify(u32 mask, u32 val, u32 offset)
+{
+	u32 new_val = (regr(offset) & ~mask) | (val & mask);
+
+	regw(new_val, offset);
+	return new_val;
+}
+
+static inline void regw_lin_tbl(u32 val, u32 offset, int i)
+{
+	if (!i)
+		__raw_writel(val, isif_cfg.linear_tbl0_addr + offset);
+	else
+		__raw_writel(val, isif_cfg.linear_tbl1_addr + offset);
+}
+
+static void isif_disable_all_modules(void)
+{
+	/* disable BC */
+	regw(0, CLAMPCFG);
+	/* disable vdfc */
+	regw(0, DFCCTL);
+	/* disable CSC */
+	regw(0, CSCCTL);
+	/* disable linearization */
+	regw(0, LINCFG0);
+	/* disable other modules here as they are supported */
+}
+
+static void isif_enable(int en)
+{
+	if (!en) {
+		/* Before disable isif, disable all ISIF modules */
+		isif_disable_all_modules();
+		/*
+		 * wait for next VD. Assume lowest scan rate is 12 Hz. So
+		 * 100 msec delay is good enough
+		 */
+		msleep(100);
+	}
+	reg_modify(ISIF_SYNCEN_VDHDEN_MASK, en, SYNCEN);
+}
+
+static void isif_enable_output_to_sdram(int en)
+{
+	reg_modify(ISIF_SYNCEN_WEN_MASK, en << ISIF_SYNCEN_WEN_SHIFT, SYNCEN);
+}
+
+static void isif_config_culling(struct isif_cul *cul)
+{
+	u32 val;
+
+	/* Horizontal pattern */
+	val = (cul->hcpat_even << CULL_PAT_EVEN_LINE_SHIFT) | cul->hcpat_odd;
+	regw(val, CULH);
+
+	/* vertical pattern */
+	regw(cul->vcpat, CULV);
+
+	/* LPF */
+	reg_modify(ISIF_LPF_MASK << ISIF_LPF_SHIFT,
+		  cul->en_lpf << ISIF_LPF_SHIFT, MODESET);
+}
+
+static void isif_config_gain_offset(void)
+{
+	struct isif_gain_offsets_adj *gain_off_p =
+		&isif_cfg.bayer.config_params.gain_offset;
+	u32 val;
+
+	val = (!!gain_off_p->gain_sdram_en << GAIN_SDRAM_EN_SHIFT) |
+	      (!!gain_off_p->gain_ipipe_en << GAIN_IPIPE_EN_SHIFT) |
+	      (!!gain_off_p->gain_h3a_en << GAIN_H3A_EN_SHIFT) |
+	      (!!gain_off_p->offset_sdram_en << OFST_SDRAM_EN_SHIFT) |
+	      (!!gain_off_p->offset_ipipe_en << OFST_IPIPE_EN_SHIFT) |
+	      (!!gain_off_p->offset_h3a_en << OFST_H3A_EN_SHIFT);
+
+	reg_modify(GAIN_OFFSET_EN_MASK, val, CGAMMAWD);
+
+	val = (gain_off_p->gain.r_ye.integer << GAIN_INTEGER_SHIFT) |
+	       gain_off_p->gain.r_ye.decimal;
+	regw(val, CRGAIN);
+
+	val = (gain_off_p->gain.gr_cy.integer << GAIN_INTEGER_SHIFT) |
+	       gain_off_p->gain.gr_cy.decimal;
+	regw(val, CGRGAIN);
+
+	val = (gain_off_p->gain.gb_g.integer << GAIN_INTEGER_SHIFT) |
+	       gain_off_p->gain.gb_g.decimal;
+	regw(val, CGBGAIN);
+
+	val = (gain_off_p->gain.b_mg.integer << GAIN_INTEGER_SHIFT) |
+	       gain_off_p->gain.b_mg.decimal;
+	regw(val, CBGAIN);
+
+	regw(gain_off_p->offset, COFSTA);
+}
+
+static void isif_restore_defaults(void)
+{
+	enum vpss_ccdc_source_sel source = VPSS_CCDCIN;
+
+	dev_dbg(isif_cfg.dev, "\nstarting isif_restore_defaults...");
+	isif_cfg.bayer.config_params = isif_config_defaults;
+	/* Enable clock to ISIF, IPIPEIF and BL */
+	vpss_enable_clock(VPSS_CCDC_CLOCK, 1);
+	vpss_enable_clock(VPSS_IPIPEIF_CLOCK, 1);
+	vpss_enable_clock(VPSS_BL_CLOCK, 1);
+	/* Set default offset and gain */
+	isif_config_gain_offset();
+	vpss_select_ccdc_source(source);
+	dev_dbg(isif_cfg.dev, "\nEnd of isif_restore_defaults...");
+}
+
+static int isif_open(struct device *device)
+{
+	isif_restore_defaults();
+	return 0;
+}
+
+/* This function will configure the window size to be capture in ISIF reg */
+static void isif_setwin(struct v4l2_rect *image_win,
+			enum ccdc_frmfmt frm_fmt, int ppc)
+{
+	int horz_start, horz_nr_pixels;
+	int vert_start, vert_nr_lines;
+	int mid_img = 0;
+
+	dev_dbg(isif_cfg.dev, "\nStarting isif_setwin...");
+	/*
+	 * ppc - per pixel count. indicates how many pixels per cell
+	 * output to SDRAM. example, for ycbcr, it is one y and one c, so 2.
+	 * raw capture this is 1
+	 */
+	horz_start = image_win->left << (ppc - 1);
+	horz_nr_pixels = ((image_win->width) << (ppc - 1)) - 1;
+
+	/* Writing the horizontal info into the registers */
+	regw(horz_start & START_PX_HOR_MASK, SPH);
+	regw(horz_nr_pixels & NUM_PX_HOR_MASK, LNH);
+	vert_start = image_win->top;
+
+	if (frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		vert_nr_lines = (image_win->height >> 1) - 1;
+		vert_start >>= 1;
+		/* To account for VD since line 0 doesn't have any data */
+		vert_start += 1;
+	} else {
+		/* To account for VD since line 0 doesn't have any data */
+		vert_start += 1;
+		vert_nr_lines = image_win->height - 1;
+		/* configure VDINT0 and VDINT1 */
+		mid_img = vert_start + (image_win->height / 2);
+		regw(mid_img, VDINT1);
+	}
+
+	regw(0, VDINT0);
+	regw(vert_start & START_VER_ONE_MASK, SLV0);
+	regw(vert_start & START_VER_TWO_MASK, SLV1);
+	regw(vert_nr_lines & NUM_LINES_VER, LNV);
+}
+
+static void isif_config_bclamp(struct isif_black_clamp *bc)
+{
+	u32 val;
+
+	/*
+	 * DC Offset is always added to image data irrespective of bc enable
+	 * status
+	 */
+	regw(bc->dc_offset, CLDCOFST);
+
+	if (bc->en) {
+		val = bc->bc_mode_color << ISIF_BC_MODE_COLOR_SHIFT;
+
+		/* Enable BC and horizontal clamp caculation paramaters */
+		val = val | 1 | (bc->horz.mode << ISIF_HORZ_BC_MODE_SHIFT);
+
+		regw(val, CLAMPCFG);
+
+		if (bc->horz.mode != ISIF_HORZ_BC_DISABLE) {
+			/*
+			 * Window count for calculation
+			 * Base window selection
+			 * pixel limit
+			 * Horizontal size of window
+			 * vertical size of the window
+			 * Horizontal start position of the window
+			 * Vertical start position of the window
+			 */
+			val = bc->horz.win_count_calc |
+			      ((!!bc->horz.base_win_sel_calc) <<
+				ISIF_HORZ_BC_WIN_SEL_SHIFT) |
+			      ((!!bc->horz.clamp_pix_limit) <<
+				ISIF_HORZ_BC_PIX_LIMIT_SHIFT) |
+			      (bc->horz.win_h_sz_calc <<
+				ISIF_HORZ_BC_WIN_H_SIZE_SHIFT) |
+			      (bc->horz.win_v_sz_calc <<
+				ISIF_HORZ_BC_WIN_V_SIZE_SHIFT);
+			regw(val, CLHWIN0);
+
+			regw(bc->horz.win_start_h_calc, CLHWIN1);
+			regw(bc->horz.win_start_v_calc, CLHWIN2);
+		}
+
+		/* vertical clamp caculation paramaters */
+
+		/* Reset clamp value sel for previous line */
+		val |=
+		(bc->vert.reset_val_sel << ISIF_VERT_BC_RST_VAL_SEL_SHIFT) |
+		(bc->vert.line_ave_coef << ISIF_VERT_BC_LINE_AVE_COEF_SHIFT);
+		regw(val, CLVWIN0);
+
+		/* Optical Black horizontal start position */
+		regw(bc->vert.ob_start_h, CLVWIN1);
+		/* Optical Black vertical start position */
+		regw(bc->vert.ob_start_v, CLVWIN2);
+		/* Optical Black vertical size for calculation */
+		regw(bc->vert.ob_v_sz_calc, CLVWIN3);
+		/* Vertical start position for BC subtraction */
+		regw(bc->vert_start_sub, CLSV);
+	}
+}
+
+static void isif_config_linearization(struct isif_linearize *linearize)
+{
+	u32 val, i;
+
+	if (!linearize->en) {
+		regw(0, LINCFG0);
+		return;
+	}
+
+	/* shift value for correction & enable linearization (set lsb) */
+	val = (linearize->corr_shft << ISIF_LIN_CORRSFT_SHIFT) | 1;
+	regw(val, LINCFG0);
+
+	/* Scale factor */
+	val = ((!!linearize->scale_fact.integer) <<
+	       ISIF_LIN_SCALE_FACT_INTEG_SHIFT) |
+	       linearize->scale_fact.decimal;
+	regw(val, LINCFG1);
+
+	for (i = 0; i < ISIF_LINEAR_TAB_SIZE; i++) {
+		if (i % 2)
+			regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 1);
+		else
+			regw_lin_tbl(linearize->table[i], ((i >> 1) << 2), 0);
+	}
+}
+
+static int isif_config_dfc(struct isif_dfc *vdfc)
+{
+	/* initialize retries to loop for max ~ 250 usec */
+	u32 val, count, retries = loops_per_jiffy / (4000/HZ);
+	int i;
+
+	if (!vdfc->en)
+		return 0;
+
+	/* Correction mode */
+	val = (vdfc->corr_mode << ISIF_VDFC_CORR_MOD_SHIFT);
+
+	/* Correct whole line or partial */
+	if (vdfc->corr_whole_line)
+		val |= 1 << ISIF_VDFC_CORR_WHOLE_LN_SHIFT;
+
+	/* level shift value */
+	val |= vdfc->def_level_shift << ISIF_VDFC_LEVEL_SHFT_SHIFT;
+
+	regw(val, DFCCTL);
+
+	/* Defect saturation level */
+	regw(vdfc->def_sat_level, VDFSATLV);
+
+	regw(vdfc->table[0].pos_vert, DFCMEM0);
+	regw(vdfc->table[0].pos_horz, DFCMEM1);
+	if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
+	    vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
+		regw(vdfc->table[0].level_at_pos, DFCMEM2);
+		regw(vdfc->table[0].level_up_pixels, DFCMEM3);
+		regw(vdfc->table[0].level_low_pixels, DFCMEM4);
+	}
+
+	/* set DFCMARST and set DFCMWR */
+	val = regr(DFCMEMCTL) | (1 << ISIF_DFCMEMCTL_DFCMARST_SHIFT) | 1;
+	regw(val, DFCMEMCTL);
+
+	count = retries;
+	while (count && (regr(DFCMEMCTL) & 0x1))
+		count--;
+
+	if (!count) {
+		dev_dbg(isif_cfg.dev, "defect table write timeout !!!\n");
+		return -1;
+	}
+
+	for (i = 1; i < vdfc->num_vdefects; i++) {
+		regw(vdfc->table[i].pos_vert, DFCMEM0);
+		regw(vdfc->table[i].pos_horz, DFCMEM1);
+		if (vdfc->corr_mode == ISIF_VDFC_NORMAL ||
+		    vdfc->corr_mode == ISIF_VDFC_HORZ_INTERPOL_IF_SAT) {
+			regw(vdfc->table[i].level_at_pos, DFCMEM2);
+			regw(vdfc->table[i].level_up_pixels, DFCMEM3);
+			regw(vdfc->table[i].level_low_pixels, DFCMEM4);
+		}
+		val = regr(DFCMEMCTL);
+		/* clear DFCMARST and set DFCMWR */
+		val &= ~BIT(ISIF_DFCMEMCTL_DFCMARST_SHIFT);
+		val |= 1;
+		regw(val, DFCMEMCTL);
+
+		count = retries;
+		while (count && (regr(DFCMEMCTL) & 0x1))
+			count--;
+
+		if (!count) {
+			dev_err(isif_cfg.dev,
+				"defect table write timeout !!!\n");
+			return -1;
+		}
+	}
+	if (vdfc->num_vdefects < ISIF_VDFC_TABLE_SIZE) {
+		/* Extra cycle needed */
+		regw(0, DFCMEM0);
+		regw(0x1FFF, DFCMEM1);
+		regw(1, DFCMEMCTL);
+	}
+
+	/* enable VDFC */
+	reg_modify((1 << ISIF_VDFC_EN_SHIFT), (1 << ISIF_VDFC_EN_SHIFT),
+		   DFCCTL);
+	return 0;
+}
+
+static void isif_config_csc(struct isif_df_csc *df_csc)
+{
+	u32 val1 = 0, val2 = 0, i;
+
+	if (!df_csc->csc.en) {
+		regw(0, CSCCTL);
+		return;
+	}
+	for (i = 0; i < ISIF_CSC_NUM_COEFF; i++) {
+		if ((i % 2) == 0) {
+			/* CSCM - LSB */
+			val1 = (df_csc->csc.coeff[i].integer <<
+				ISIF_CSC_COEF_INTEG_SHIFT) |
+				df_csc->csc.coeff[i].decimal;
+		} else {
+
+			/* CSCM - MSB */
+			val2 = (df_csc->csc.coeff[i].integer <<
+				ISIF_CSC_COEF_INTEG_SHIFT) |
+				df_csc->csc.coeff[i].decimal;
+			val2 <<= ISIF_CSCM_MSB_SHIFT;
+			val2 |= val1;
+			regw(val2, (CSCM0 + ((i - 1) << 1)));
+		}
+	}
+
+	/* program the active area */
+	regw(df_csc->start_pix, FMTSPH);
+	/*
+	 * one extra pixel as required for CSC. Actually number of
+	 * pixel - 1 should be configured in this register. So we
+	 * need to subtract 1 before writing to FMTSPH, but we will
+	 * not do this since csc requires one extra pixel
+	 */
+	regw(df_csc->num_pixels, FMTLNH);
+	regw(df_csc->start_line, FMTSLV);
+	/*
+	 * one extra line as required for CSC. See reason documented for
+	 * num_pixels
+	 */
+	regw(df_csc->num_lines, FMTLNV);
+
+	/* Enable CSC */
+	regw(1, CSCCTL);
+}
+
+static int isif_config_raw(void)
+{
+	struct isif_params_raw *params = &isif_cfg.bayer;
+	struct isif_config_params_raw *module_params =
+		&isif_cfg.bayer.config_params;
+	struct vpss_pg_frame_size frame_size;
+	struct vpss_sync_pol sync;
+	u32 val;
+
+	dev_dbg(isif_cfg.dev, "\nStarting isif_config_raw..\n");
+
+	/*
+	 * Configure CCDCFG register:-
+	 * Set CCD Not to swap input since input is RAW data
+	 * Set FID detection function to Latch at V-Sync
+	 * Set WENLOG - isif valid area
+	 * Set TRGSEL
+	 * Set EXTRG
+	 * Packed to 8 or 16 bits
+	 */
+
+	val = ISIF_YCINSWP_RAW | ISIF_CCDCFG_FIDMD_LATCH_VSYNC |
+		ISIF_CCDCFG_WENLOG_AND | ISIF_CCDCFG_TRGSEL_WEN |
+		ISIF_CCDCFG_EXTRG_DISABLE | isif_cfg.data_pack;
+
+	dev_dbg(isif_cfg.dev, "Writing 0x%x to ...CCDCFG \n", val);
+	regw(val, CCDCFG);
+
+	/*
+	 * Configure the vertical sync polarity(MODESET.VDPOL)
+	 * Configure the horizontal sync polarity (MODESET.HDPOL)
+	 * Configure frame id polarity (MODESET.FLDPOL)
+	 * Configure data polarity
+	 * Configure External WEN Selection
+	 * Configure frame format(progressive or interlace)
+	 * Configure pixel format (Input mode)
+	 * Configure the data shift
+	 */
+
+	val = ISIF_VDHDOUT_INPUT | (params->vd_pol << ISIF_VD_POL_SHIFT) |
+		(params->hd_pol << ISIF_HD_POL_SHIFT) |
+		(params->fid_pol << ISIF_FID_POL_SHIFT) |
+		(ISIF_DATAPOL_NORMAL << ISIF_DATAPOL_SHIFT) |
+		(ISIF_EXWEN_DISABLE << ISIF_EXWEN_SHIFT) |
+		(params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
+		(params->pix_fmt << ISIF_INPUT_SHIFT) |
+		(params->config_params.data_shift << ISIF_DATASFT_SHIFT);
+
+	regw(val, MODESET);
+	dev_dbg(isif_cfg.dev, "Writing 0x%x to MODESET...\n", val);
+
+	/*
+	 * Configure GAMMAWD register
+	 * CFA pattern setting
+	 */
+	val = params->cfa_pat << ISIF_GAMMAWD_CFA_SHIFT;
+
+	/* Gamma msb */
+	if (module_params->compress.alg == ISIF_ALAW)
+		val |= ISIF_ALAW_ENABLE;
+
+	val |= (params->data_msb << ISIF_ALAW_GAMMA_WD_SHIFT);
+	regw(val, CGAMMAWD);
+
+	/* Configure DPCM compression settings */
+	if (module_params->compress.alg == ISIF_DPCM) {
+		val =  BIT(ISIF_DPCM_EN_SHIFT) |
+		       (module_params->compress.pred <<
+		       ISIF_DPCM_PREDICTOR_SHIFT);
+	}
+
+	regw(val, MISC);
+
+	/* Configure Gain & Offset */
+	isif_config_gain_offset();
+
+	/* Configure Color pattern */
+	val = (params->config_params.col_pat_field0.olop) |
+	      (params->config_params.col_pat_field0.olep << 2) |
+	      (params->config_params.col_pat_field0.elop << 4) |
+	      (params->config_params.col_pat_field0.elep << 6) |
+	      (params->config_params.col_pat_field1.olop << 8) |
+	      (params->config_params.col_pat_field1.olep << 10) |
+	      (params->config_params.col_pat_field1.elop << 12) |
+	      (params->config_params.col_pat_field1.elep << 14);
+	regw(val, CCOLP);
+	dev_dbg(isif_cfg.dev, "Writing %x to CCOLP ...\n", val);
+
+	/* Configure HSIZE register  */
+	val = (!!params->horz_flip_en) << ISIF_HSIZE_FLIP_SHIFT;
+
+	/* calculate line offset in 32 bytes based on pack value */
+	if (isif_cfg.data_pack == ISIF_PACK_8BIT)
+		val |= ((params->win.width + 31) >> 5);
+	else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
+		val |= (((params->win.width +
+		       (params->win.width >> 2)) + 31) >> 5);
+	else
+		val |= (((params->win.width * 2) + 31) >> 5);
+	regw(val, HSIZE);
+
+	/* Configure SDOFST register  */
+	if (params->frm_fmt == CCDC_FRMFMT_INTERLACED) {
+		if (params->image_invert_en) {
+			/* For interlace inverse mode */
+			regw(0x4B6D, SDOFST);
+			dev_dbg(isif_cfg.dev, "Writing 0x4B6D to SDOFST...\n");
+		} else {
+			/* For interlace non inverse mode */
+			regw(0x0B6D, SDOFST);
+			dev_dbg(isif_cfg.dev, "Writing 0x0B6D to SDOFST...\n");
+		}
+	} else if (params->frm_fmt == CCDC_FRMFMT_PROGRESSIVE) {
+		if (params->image_invert_en) {
+			/* For progressive inverse mode */
+			regw(0x4000, SDOFST);
+			dev_dbg(isif_cfg.dev, "Writing 0x4000 to SDOFST...\n");
+		} else {
+			/* For progressive non inverse mode */
+			regw(0x0000, SDOFST);
+			dev_dbg(isif_cfg.dev, "Writing 0x0000 to SDOFST...\n");
+		}
+	}
+
+	/* Configure video window */
+	isif_setwin(&params->win, params->frm_fmt, 1);
+
+	/* Configure Black Clamp */
+	isif_config_bclamp(&module_params->bclamp);
+
+	/* Configure Vertical Defection Pixel Correction */
+	if (isif_config_dfc(&module_params->dfc) < 0)
+		return -EFAULT;
+
+	if (!module_params->df_csc.df_or_csc)
+		/* Configure Color Space Conversion */
+		isif_config_csc(&module_params->df_csc);
+
+	isif_config_linearization(&module_params->linearize);
+
+	/* Configure Culling */
+	isif_config_culling(&module_params->culling);
+
+	/* Configure horizontal and vertical offsets(DFC,LSC,Gain) */
+	regw(module_params->horz_offset, DATAHOFST);
+	regw(module_params->vert_offset, DATAVOFST);
+
+	/* Setup test pattern if enabled */
+	if (params->config_params.test_pat_gen) {
+		/* Use the HD/VD pol settings from user */
+		sync.ccdpg_hdpol = params->hd_pol;
+		sync.ccdpg_vdpol = params->vd_pol;
+		dm365_vpss_set_sync_pol(sync);
+		frame_size.hlpfr = isif_cfg.bayer.win.width;
+		frame_size.pplen = isif_cfg.bayer.win.height;
+		dm365_vpss_set_pg_frame_size(frame_size);
+		vpss_select_ccdc_source(VPSS_PGLPBK);
+	}
+
+	dev_dbg(isif_cfg.dev, "\nEnd of isif_config_ycbcr...\n");
+	return 0;
+}
+
+static int isif_set_buftype(enum ccdc_buftype buf_type)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		isif_cfg.bayer.buf_type = buf_type;
+	else
+		isif_cfg.ycbcr.buf_type = buf_type;
+
+	return 0;
+
+}
+static enum ccdc_buftype isif_get_buftype(void)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		return isif_cfg.bayer.buf_type;
+
+	return isif_cfg.ycbcr.buf_type;
+}
+
+static int isif_enum_pix(u32 *pix, int i)
+{
+	int ret = -EINVAL;
+
+	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+		if (i < ARRAY_SIZE(isif_raw_bayer_pix_formats)) {
+			*pix = isif_raw_bayer_pix_formats[i];
+			ret = 0;
+		}
+	} else {
+		if (i < ARRAY_SIZE(isif_raw_yuv_pix_formats)) {
+			*pix = isif_raw_yuv_pix_formats[i];
+			ret = 0;
+		}
+	}
+
+	return ret;
+}
+
+static int isif_set_pixel_format(unsigned int pixfmt)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+		if (pixfmt == V4L2_PIX_FMT_SBGGR8) {
+			if ((isif_cfg.bayer.config_params.compress.alg !=
+			     ISIF_ALAW) &&
+			    (isif_cfg.bayer.config_params.compress.alg !=
+			     ISIF_DPCM)) {
+				dev_dbg(isif_cfg.dev,
+					"Either configure A-Law or DPCM\n");
+				return -EINVAL;
+			}
+			isif_cfg.data_pack = ISIF_PACK_8BIT;
+		} else if (pixfmt == V4L2_PIX_FMT_SBGGR16) {
+			isif_cfg.bayer.config_params.compress.alg =
+					ISIF_NO_COMPRESSION;
+			isif_cfg.data_pack = ISIF_PACK_16BIT;
+		} else
+			return -EINVAL;
+		isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+	} else {
+		if (pixfmt == V4L2_PIX_FMT_YUYV)
+			isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_YCBYCR;
+		else if (pixfmt == V4L2_PIX_FMT_UYVY)
+			isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+		else
+			return -EINVAL;
+		isif_cfg.data_pack = ISIF_PACK_8BIT;
+	}
+	return 0;
+}
+
+static u32 isif_get_pixel_format(void)
+{
+	u32 pixfmt;
+
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		if (isif_cfg.bayer.config_params.compress.alg == ISIF_ALAW ||
+		    isif_cfg.bayer.config_params.compress.alg == ISIF_DPCM)
+			pixfmt = V4L2_PIX_FMT_SBGGR8;
+		else
+			pixfmt = V4L2_PIX_FMT_SBGGR16;
+	else {
+		if (isif_cfg.ycbcr.pix_order == CCDC_PIXORDER_YCBYCR)
+			pixfmt = V4L2_PIX_FMT_YUYV;
+		else
+			pixfmt = V4L2_PIX_FMT_UYVY;
+	}
+	return pixfmt;
+}
+
+static int isif_set_image_window(struct v4l2_rect *win)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+		isif_cfg.bayer.win.top = win->top;
+		isif_cfg.bayer.win.left = win->left;
+		isif_cfg.bayer.win.width = win->width;
+		isif_cfg.bayer.win.height = win->height;
+	} else {
+		isif_cfg.ycbcr.win.top = win->top;
+		isif_cfg.ycbcr.win.left = win->left;
+		isif_cfg.ycbcr.win.width = win->width;
+		isif_cfg.ycbcr.win.height = win->height;
+	}
+	return 0;
+}
+
+static void isif_get_image_window(struct v4l2_rect *win)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		*win = isif_cfg.bayer.win;
+	else
+		*win = isif_cfg.ycbcr.win;
+}
+
+static unsigned int isif_get_line_length(void)
+{
+	unsigned int len;
+
+	if (isif_cfg.if_type == VPFE_RAW_BAYER) {
+		if (isif_cfg.data_pack == ISIF_PACK_8BIT)
+			len = ((isif_cfg.bayer.win.width));
+		else if (isif_cfg.data_pack == ISIF_PACK_12BIT)
+			len = (((isif_cfg.bayer.win.width * 2) +
+				 (isif_cfg.bayer.win.width >> 2)));
+		else
+			len = (((isif_cfg.bayer.win.width * 2)));
+	} else
+		len = (((isif_cfg.ycbcr.win.width * 2)));
+	return ALIGN(len, 32);
+}
+
+static int isif_set_frame_format(enum ccdc_frmfmt frm_fmt)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		isif_cfg.bayer.frm_fmt = frm_fmt;
+	else
+		isif_cfg.ycbcr.frm_fmt = frm_fmt;
+	return 0;
+}
+static enum ccdc_frmfmt isif_get_frame_format(void)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		return isif_cfg.bayer.frm_fmt;
+	return isif_cfg.ycbcr.frm_fmt;
+}
+
+static int isif_getfid(void)
+{
+	return (regr(MODESET) >> 15) & 0x1;
+}
+
+/* misc operations */
+static void isif_setfbaddr(unsigned long addr)
+{
+	regw((addr >> 21) & 0x07ff, CADU);
+	regw((addr >> 5) & 0x0ffff, CADL);
+}
+
+static int isif_set_hw_if_params(struct vpfe_hw_if_param *params)
+{
+	isif_cfg.if_type = params->if_type;
+
+	switch (params->if_type) {
+	case VPFE_BT656:
+	case VPFE_BT656_10BIT:
+	case VPFE_YCBCR_SYNC_8:
+		isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_8BIT;
+		isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+		break;
+	case VPFE_BT1120:
+	case VPFE_YCBCR_SYNC_16:
+		isif_cfg.ycbcr.pix_fmt = CCDC_PIXFMT_YCBCR_16BIT;
+		isif_cfg.ycbcr.pix_order = CCDC_PIXORDER_CBYCRY;
+		break;
+	case VPFE_RAW_BAYER:
+		isif_cfg.bayer.pix_fmt = CCDC_PIXFMT_RAW;
+		break;
+	default:
+		dev_dbg(isif_cfg.dev, "Invalid interface type\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+/* This function will configure ISIF for YCbCr parameters. */
+static int isif_config_ycbcr(void)
+{
+	struct isif_ycbcr_config *params = &isif_cfg.ycbcr;
+	struct vpss_pg_frame_size frame_size;
+	u32 modeset = 0, ccdcfg = 0;
+	struct vpss_sync_pol sync;
+
+	dev_dbg(isif_cfg.dev, "\nStarting isif_config_ycbcr...");
+
+	/* configure pixel format or input mode */
+	modeset = modeset | (params->pix_fmt << ISIF_INPUT_SHIFT) |
+		  (params->frm_fmt << ISIF_FRM_FMT_SHIFT) |
+		  (params->fid_pol << ISIF_FID_POL_SHIFT) |
+		  (params->hd_pol << ISIF_HD_POL_SHIFT) |
+		  (params->vd_pol << ISIF_VD_POL_SHIFT);
+
+	/* pack the data to 8-bit ISIFCFG */
+	switch (isif_cfg.if_type) {
+	case VPFE_BT656:
+		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
+			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+			return -EINVAL;
+		}
+		modeset |= (VPFE_PINPOL_NEGATIVE << ISIF_VD_POL_SHIFT);
+		regw(3, REC656IF);
+		ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR;
+		break;
+	case VPFE_BT656_10BIT:
+		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
+			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+			return -EINVAL;
+		}
+		/* setup BT.656, embedded sync  */
+		regw(3, REC656IF);
+		/* enable 10 bit mode in ccdcfg */
+		ccdcfg = ccdcfg | ISIF_DATA_PACK8 | ISIF_YCINSWP_YCBCR |
+			ISIF_BW656_ENABLE;
+		break;
+	case VPFE_BT1120:
+		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
+			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+			return -EINVAL;
+		}
+		regw(3, REC656IF);
+		break;
+
+	case VPFE_YCBCR_SYNC_8:
+		ccdcfg |= ISIF_DATA_PACK8;
+		ccdcfg |= ISIF_YCINSWP_YCBCR;
+		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_8BIT) {
+			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+			return -EINVAL;
+		}
+		break;
+	case VPFE_YCBCR_SYNC_16:
+		if (params->pix_fmt != CCDC_PIXFMT_YCBCR_16BIT) {
+			dev_dbg(isif_cfg.dev, "Invalid pix_fmt(input mode)\n");
+			return -EINVAL;
+		}
+		break;
+	default:
+		/* should never come here */
+		dev_dbg(isif_cfg.dev, "Invalid interface type\n");
+		return -EINVAL;
+	}
+
+	regw(modeset, MODESET);
+
+	/* Set up pix order */
+	ccdcfg |= params->pix_order << ISIF_PIX_ORDER_SHIFT;
+
+	regw(ccdcfg, CCDCFG);
+
+	/* configure video window */
+	if ((isif_cfg.if_type == VPFE_BT1120) ||
+	    (isif_cfg.if_type == VPFE_YCBCR_SYNC_16))
+		isif_setwin(&params->win, params->frm_fmt, 1);
+	else
+		isif_setwin(&params->win, params->frm_fmt, 2);
+
+	/*
+	 * configure the horizontal line offset
+	 * this is done by rounding up width to a multiple of 16 pixels
+	 * and multiply by two to account for y:cb:cr 4:2:2 data
+	 */
+	regw(((((params->win.width * 2) + 31) & 0xffffffe0) >> 5), HSIZE);
+
+	/* configure the memory line offset */
+	if ((params->frm_fmt == CCDC_FRMFMT_INTERLACED) &&
+	    (params->buf_type == CCDC_BUFTYPE_FLD_INTERLEAVED))
+		/* two fields are interleaved in memory */
+		regw(0x00000249, SDOFST);
+
+	/* Setup test pattern if enabled */
+	if (isif_cfg.bayer.config_params.test_pat_gen) {
+		sync.ccdpg_hdpol = params->hd_pol;
+		sync.ccdpg_vdpol = params->vd_pol;
+		dm365_vpss_set_sync_pol(sync);
+		dm365_vpss_set_pg_frame_size(frame_size);
+	}
+	return 0;
+}
+
+static int isif_configure(void)
+{
+	if (isif_cfg.if_type == VPFE_RAW_BAYER)
+		return isif_config_raw();
+	return isif_config_ycbcr();
+}
+
+static int isif_close(struct device *device)
+{
+	/* copy defaults to module params */
+	isif_cfg.bayer.config_params = isif_config_defaults;
+	return 0;
+}
+
+static struct ccdc_hw_device isif_hw_dev = {
+	.name = "ISIF",
+	.owner = THIS_MODULE,
+	.hw_ops = {
+		.open = isif_open,
+		.close = isif_close,
+		.enable = isif_enable,
+		.enable_out_to_sdram = isif_enable_output_to_sdram,
+		.set_hw_if_params = isif_set_hw_if_params,
+		.configure = isif_configure,
+		.set_buftype = isif_set_buftype,
+		.get_buftype = isif_get_buftype,
+		.enum_pix = isif_enum_pix,
+		.set_pixel_format = isif_set_pixel_format,
+		.get_pixel_format = isif_get_pixel_format,
+		.set_frame_format = isif_set_frame_format,
+		.get_frame_format = isif_get_frame_format,
+		.set_image_window = isif_set_image_window,
+		.get_image_window = isif_get_image_window,
+		.get_line_length = isif_get_line_length,
+		.setfbaddr = isif_setfbaddr,
+		.getfid = isif_getfid,
+	},
+};
+
+static int isif_probe(struct platform_device *pdev)
+{
+	void (*setup_pinmux)(void);
+	struct resource	*res;
+	void *__iomem addr;
+	int status = 0, i;
+
+	/* Platform data holds setup_pinmux function ptr */
+	if (!pdev->dev.platform_data)
+		return -ENODEV;
+
+	/*
+	 * first try to register with vpfe. If not correct platform, then we
+	 * don't have to iomap
+	 */
+	status = vpfe_register_ccdc_device(&isif_hw_dev);
+	if (status < 0)
+		return status;
+
+	setup_pinmux = pdev->dev.platform_data;
+	/*
+	 * setup Mux configuration for ccdc which may be different for
+	 * different SoCs using this CCDC
+	 */
+	setup_pinmux();
+
+	i = 0;
+	/* Get the ISIF base address, linearization table0 and table1 addr. */
+	while (i < 3) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (!res) {
+			status = -ENODEV;
+			goto fail_nobase_res;
+		}
+		res = request_mem_region(res->start, resource_size(res),
+					 res->name);
+		if (!res) {
+			status = -EBUSY;
+			goto fail_nobase_res;
+		}
+		addr = ioremap_nocache(res->start, resource_size(res));
+		if (!addr) {
+			status = -ENOMEM;
+			goto fail_base_iomap;
+		}
+		switch (i) {
+		case 0:
+			/* ISIF base address */
+			isif_cfg.base_addr = addr;
+			break;
+		case 1:
+			/* ISIF linear tbl0 address */
+			isif_cfg.linear_tbl0_addr = addr;
+			break;
+		default:
+			/* ISIF linear tbl0 address */
+			isif_cfg.linear_tbl1_addr = addr;
+			break;
+		}
+		i++;
+	}
+	isif_cfg.dev = &pdev->dev;
+
+	printk(KERN_NOTICE "%s is registered with vpfe.\n",
+		isif_hw_dev.name);
+	return 0;
+fail_base_iomap:
+	release_mem_region(res->start, resource_size(res));
+	i--;
+fail_nobase_res:
+	if (isif_cfg.base_addr)
+		iounmap(isif_cfg.base_addr);
+	if (isif_cfg.linear_tbl0_addr)
+		iounmap(isif_cfg.linear_tbl0_addr);
+
+	while (i >= 0) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		release_mem_region(res->start, resource_size(res));
+		i--;
+	}
+	vpfe_unregister_ccdc_device(&isif_hw_dev);
+	return status;
+}
+
+static int isif_remove(struct platform_device *pdev)
+{
+	struct resource	*res;
+	int i = 0;
+
+	iounmap(isif_cfg.base_addr);
+	iounmap(isif_cfg.linear_tbl0_addr);
+	iounmap(isif_cfg.linear_tbl1_addr);
+	while (i < 3) {
+		res = platform_get_resource(pdev, IORESOURCE_MEM, i);
+		if (res)
+			release_mem_region(res->start, resource_size(res));
+		i++;
+	}
+	vpfe_unregister_ccdc_device(&isif_hw_dev);
+	return 0;
+}
+
+static struct platform_driver isif_driver = {
+	.driver = {
+		.name	= "isif",
+	},
+	.remove = isif_remove,
+	.probe = isif_probe,
+};
+
+module_platform_driver(isif_driver);
+
+MODULE_LICENSE("GPL");