File-copy from v4.4.100
This is the result of 'cp' from a linux-stable tree with the 'v4.4.100'
tag checked out (commit 26d6298789e695c9f627ce49a7bbd2286405798a) on
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Please refer to that tree for all history prior to this point.
Change-Id: I8a9ee2aea93cd29c52c847d0ce33091a73ae6afe
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
new file mode 100644
index 0000000..8f49f8a
--- /dev/null
+++ b/drivers/mtd/nand/Kconfig
@@ -0,0 +1,549 @@
+config MTD_NAND_ECC
+ tristate
+
+config MTD_NAND_ECC_SMC
+ bool "NAND ECC Smart Media byte order"
+ depends on MTD_NAND_ECC
+ default n
+ help
+ Software ECC according to the Smart Media Specification.
+ The original Linux implementation had byte 0 and 1 swapped.
+
+
+menuconfig MTD_NAND
+ tristate "NAND Device Support"
+ depends on MTD
+ select MTD_NAND_IDS
+ select MTD_NAND_ECC
+ help
+ This enables support for accessing all type of NAND flash
+ devices. For further information see
+ <http://www.linux-mtd.infradead.org/doc/nand.html>.
+
+if MTD_NAND
+
+config MTD_NAND_BCH
+ tristate
+ select BCH
+ depends on MTD_NAND_ECC_BCH
+ default MTD_NAND
+
+config MTD_NAND_ECC_BCH
+ bool "Support software BCH ECC"
+ default n
+ help
+ This enables support for software BCH error correction. Binary BCH
+ codes are more powerful and cpu intensive than traditional Hamming
+ ECC codes. They are used with NAND devices requiring more than 1 bit
+ of error correction.
+
+config MTD_SM_COMMON
+ tristate
+ default n
+
+config MTD_NAND_DENALI
+ tristate
+
+config MTD_NAND_DENALI_PCI
+ tristate "Support Denali NAND controller on Intel Moorestown"
+ select MTD_NAND_DENALI
+ depends on HAS_DMA && PCI
+ help
+ Enable the driver for NAND flash on Intel Moorestown, using the
+ Denali NAND controller core.
+
+config MTD_NAND_DENALI_DT
+ tristate "Support Denali NAND controller as a DT device"
+ select MTD_NAND_DENALI
+ depends on HAS_DMA && HAVE_CLK
+ help
+ Enable the driver for NAND flash on platforms using a Denali NAND
+ controller as a DT device.
+
+config MTD_NAND_DENALI_SCRATCH_REG_ADDR
+ hex "Denali NAND size scratch register address"
+ default "0xFF108018"
+ depends on MTD_NAND_DENALI_PCI
+ help
+ Some platforms place the NAND chip size in a scratch register
+ because (some versions of) the driver aren't able to automatically
+ determine the size of certain chips. Set the address of the
+ scratch register here to enable this feature. On Intel Moorestown
+ boards, the scratch register is at 0xFF108018.
+
+config MTD_NAND_GPIO
+ tristate "GPIO assisted NAND Flash driver"
+ depends on GPIOLIB || COMPILE_TEST
+ help
+ This enables a NAND flash driver where control signals are
+ connected to GPIO pins, and commands and data are communicated
+ via a memory mapped interface.
+
+config MTD_NAND_AMS_DELTA
+ tristate "NAND Flash device on Amstrad E3"
+ depends on MACH_AMS_DELTA
+ default y
+ help
+ Support for NAND flash on Amstrad E3 (Delta).
+
+config MTD_NAND_OMAP2
+ tristate "NAND Flash device on OMAP2, OMAP3 and OMAP4"
+ depends on ARCH_OMAP2PLUS
+ help
+ Support for NAND flash on Texas Instruments OMAP2, OMAP3 and OMAP4
+ platforms.
+
+config MTD_NAND_OMAP_BCH
+ depends on MTD_NAND_OMAP2
+ bool "Support hardware based BCH error correction"
+ default n
+ select BCH
+ help
+ This config enables the ELM hardware engine, which can be used to
+ locate and correct errors when using BCH ECC scheme. This offloads
+ the cpu from doing ECC error searching and correction. However some
+ legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine
+ so this is optional for them.
+
+config MTD_NAND_OMAP_BCH_BUILD
+ def_tristate MTD_NAND_OMAP2 && MTD_NAND_OMAP_BCH
+
+config MTD_NAND_IDS
+ tristate
+
+config MTD_NAND_RICOH
+ tristate "Ricoh xD card reader"
+ default n
+ depends on PCI
+ select MTD_SM_COMMON
+ help
+ Enable support for Ricoh R5C852 xD card reader
+ You also need to enable ether
+ NAND SSFDC (SmartMedia) read only translation layer' or new
+ expermental, readwrite
+ 'SmartMedia/xD new translation layer'
+
+config MTD_NAND_AU1550
+ tristate "Au1550/1200 NAND support"
+ depends on MIPS_ALCHEMY
+ help
+ This enables the driver for the NAND flash controller on the
+ AMD/Alchemy 1550 SOC.
+
+config MTD_NAND_BF5XX
+ tristate "Blackfin on-chip NAND Flash Controller driver"
+ depends on BF54x || BF52x
+ help
+ This enables the Blackfin on-chip NAND flash controller
+
+ No board specific support is done by this driver, each board
+ must advertise a platform_device for the driver to attach.
+
+ This driver can also be built as a module. If so, the module
+ will be called bf5xx-nand.
+
+config MTD_NAND_BF5XX_HWECC
+ bool "BF5XX NAND Hardware ECC"
+ default y
+ depends on MTD_NAND_BF5XX
+ help
+ Enable the use of the BF5XX's internal ECC generator when
+ using NAND.
+
+config MTD_NAND_BF5XX_BOOTROM_ECC
+ bool "Use Blackfin BootROM ECC Layout"
+ default n
+ depends on MTD_NAND_BF5XX_HWECC
+ help
+ If you wish to modify NAND pages and allow the Blackfin on-chip
+ BootROM to boot from them, say Y here. This is only necessary
+ if you are booting U-Boot out of NAND and you wish to update
+ U-Boot from Linux' userspace. Otherwise, you should say N here.
+
+ If unsure, say N.
+
+config MTD_NAND_S3C2410
+ tristate "NAND Flash support for Samsung S3C SoCs"
+ depends on ARCH_S3C24XX || ARCH_S3C64XX
+ help
+ This enables the NAND flash controller on the S3C24xx and S3C64xx
+ SoCs
+
+ No board specific support is done by this driver, each board
+ must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_S3C2410_DEBUG
+ bool "Samsung S3C NAND driver debug"
+ depends on MTD_NAND_S3C2410
+ help
+ Enable debugging of the S3C NAND driver
+
+config MTD_NAND_S3C2410_HWECC
+ bool "Samsung S3C NAND Hardware ECC"
+ depends on MTD_NAND_S3C2410
+ help
+ Enable the use of the controller's internal ECC generator when
+ using NAND. Early versions of the chips have had problems with
+ incorrect ECC generation, and if using these, the default of
+ software ECC is preferable.
+
+config MTD_NAND_NDFC
+ tristate "NDFC NanD Flash Controller"
+ depends on 4xx
+ select MTD_NAND_ECC_SMC
+ help
+ NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs
+
+config MTD_NAND_S3C2410_CLKSTOP
+ bool "Samsung S3C NAND IDLE clock stop"
+ depends on MTD_NAND_S3C2410
+ default n
+ help
+ Stop the clock to the NAND controller when there is no chip
+ selected to save power. This will mean there is a small delay
+ when the is NAND chip selected or released, but will save
+ approximately 5mA of power when there is nothing happening.
+
+config MTD_NAND_DISKONCHIP
+ tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)"
+ depends on HAS_IOMEM
+ select REED_SOLOMON
+ select REED_SOLOMON_DEC16
+ help
+ This is a reimplementation of M-Systems DiskOnChip 2000,
+ Millennium and Millennium Plus as a standard NAND device driver,
+ as opposed to the earlier self-contained MTD device drivers.
+ This should enable, among other things, proper JFFS2 operation on
+ these devices.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ bool "Advanced detection options for DiskOnChip"
+ depends on MTD_NAND_DISKONCHIP
+ help
+ This option allows you to specify nonstandard address at which to
+ probe for a DiskOnChip, or to change the detection options. You
+ are unlikely to need any of this unless you are using LinuxBIOS.
+ Say 'N'.
+
+config MTD_NAND_DISKONCHIP_PROBE_ADDRESS
+ hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ depends on MTD_NAND_DISKONCHIP
+ default "0"
+ ---help---
+ By default, the probe for DiskOnChip devices will look for a
+ DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+ This option allows you to specify a single address at which to probe
+ for the device, which is useful if you have other devices in that
+ range which get upset when they are probed.
+
+ (Note that on PowerPC, the normal probe will only check at
+ 0xE4000000.)
+
+ Normally, you should leave this set to zero, to allow the probe at
+ the normal addresses.
+
+config MTD_NAND_DISKONCHIP_PROBE_HIGH
+ bool "Probe high addresses"
+ depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED
+ help
+ By default, the probe for DiskOnChip devices will look for a
+ DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000.
+ This option changes to make it probe between 0xFFFC8000 and
+ 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be
+ useful to you. Say 'N'.
+
+config MTD_NAND_DISKONCHIP_BBTWRITE
+ bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP"
+ depends on MTD_NAND_DISKONCHIP
+ help
+ On DiskOnChip devices shipped with the INFTL filesystem (Millennium
+ and 2000 TSOP/Alon), Linux reserves some space at the end of the
+ device for the Bad Block Table (BBT). If you have existing INFTL
+ data on your device (created by non-Linux tools such as M-Systems'
+ DOS drivers), your data might overlap the area Linux wants to use for
+ the BBT. If this is a concern for you, leave this option disabled and
+ Linux will not write BBT data into this area.
+ The downside of leaving this option disabled is that if bad blocks
+ are detected by Linux, they will not be recorded in the BBT, which
+ could cause future problems.
+ Once you enable this option, new filesystems (INFTL or others, created
+ in Linux or other operating systems) will not use the reserved area.
+ The only reason not to enable this option is to prevent damage to
+ preexisting filesystems.
+ Even if you leave this disabled, you can enable BBT writes at module
+ load time (assuming you build diskonchip as a module) with the module
+ parameter "inftl_bbt_write=1".
+
+config MTD_NAND_DOCG4
+ tristate "Support for DiskOnChip G4"
+ depends on HAS_IOMEM
+ select BCH
+ select BITREVERSE
+ help
+ Support for diskonchip G4 nand flash, found in various smartphones and
+ PDAs, among them the Palm Treo680, HTC Prophet and Wizard, Toshiba
+ Portege G900, Asus P526, and O2 XDA Zinc.
+
+ With this driver you will be able to use UBI and create a ubifs on the
+ device, so you may wish to consider enabling UBI and UBIFS as well.
+
+ These devices ship with the Mys/Sandisk SAFTL formatting, for which
+ there is currently no mtd parser, so you may want to use command line
+ partitioning to segregate write-protected blocks. On the Treo680, the
+ first five erase blocks (256KiB each) are write-protected, followed
+ by the block containing the saftl partition table. This is probably
+ typical.
+
+config MTD_NAND_SHARPSL
+ tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
+ depends on ARCH_PXA
+
+config MTD_NAND_CAFE
+ tristate "NAND support for OLPC CAFÉ chip"
+ depends on PCI
+ select REED_SOLOMON
+ select REED_SOLOMON_DEC16
+ help
+ Use NAND flash attached to the CAFÉ chip designed for the OLPC
+ laptop.
+
+config MTD_NAND_CS553X
+ tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
+ depends on X86_32
+ help
+ The CS553x companion chips for the AMD Geode processor
+ include NAND flash controllers with built-in hardware ECC
+ capabilities; enabling this option will allow you to use
+ these. The driver will check the MSRs to verify that the
+ controller is enabled for NAND, and currently requires that
+ the controller be in MMIO mode.
+
+ If you say "m", the module will be called cs553x_nand.
+
+config MTD_NAND_ATMEL
+ tristate "Support for NAND Flash / SmartMedia on AT91 and AVR32"
+ depends on ARCH_AT91 || AVR32
+ help
+ Enables support for NAND Flash / Smart Media Card interface
+ on Atmel AT91 and AVR32 processors.
+
+config MTD_NAND_PXA3xx
+ tristate "NAND support on PXA3xx and Armada 370/XP"
+ depends on PXA3xx || ARCH_MMP || PLAT_ORION
+ help
+ This enables the driver for the NAND flash device found on
+ PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2).
+
+config MTD_NAND_SLC_LPC32XX
+ tristate "NXP LPC32xx SLC Controller"
+ depends on ARCH_LPC32XX
+ help
+ Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell
+ chips) NAND controller. This is the default for the PHYTEC 3250
+ reference board which contains a NAND256R3A2CZA6 chip.
+
+ Please check the actual NAND chip connected and its support
+ by the SLC NAND controller.
+
+config MTD_NAND_MLC_LPC32XX
+ tristate "NXP LPC32xx MLC Controller"
+ depends on ARCH_LPC32XX
+ help
+ Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND
+ controller. This is the default for the WORK92105 controller
+ board.
+
+ Please check the actual NAND chip connected and its support
+ by the MLC NAND controller.
+
+config MTD_NAND_CM_X270
+ tristate "Support for NAND Flash on CM-X270 modules"
+ depends on MACH_ARMCORE
+
+config MTD_NAND_PASEMI
+ tristate "NAND support for PA Semi PWRficient"
+ depends on PPC_PASEMI
+ help
+ Enables support for NAND Flash interface on PA Semi PWRficient
+ based boards
+
+config MTD_NAND_TMIO
+ tristate "NAND Flash device on Toshiba Mobile IO Controller"
+ depends on MFD_TMIO
+ help
+ Support for NAND flash connected to a Toshiba Mobile IO
+ Controller in some PDAs, including the Sharp SL6000x.
+
+config MTD_NAND_NANDSIM
+ tristate "Support for NAND Flash Simulator"
+ help
+ The simulator may simulate various NAND flash chips for the
+ MTD nand layer.
+
+config MTD_NAND_GPMI_NAND
+ tristate "GPMI NAND Flash Controller driver"
+ depends on MTD_NAND && MXS_DMA
+ help
+ Enables NAND Flash support for IMX23, IMX28 or IMX6.
+ The GPMI controller is very powerful, with the help of BCH
+ module, it can do the hardware ECC. The GPMI supports several
+ NAND flashs at the same time. The GPMI may conflicts with other
+ block, such as SD card. So pay attention to it when you enable
+ the GPMI.
+
+config MTD_NAND_BRCMNAND
+ tristate "Broadcom STB NAND controller"
+ depends on ARM || ARM64 || MIPS
+ help
+ Enables the Broadcom NAND controller driver. The controller was
+ originally designed for Set-Top Box but is used on various BCM7xxx,
+ BCM3xxx, BCM63xxx, iProc/Cygnus and more.
+
+config MTD_NAND_BCM47XXNFLASH
+ tristate "Support for NAND flash on BCM4706 BCMA bus"
+ depends on BCMA_NFLASH
+ help
+ BCMA bus can have various flash memories attached, they are
+ registered by bcma as platform devices. This enables driver for
+ NAND flash memories. For now only BCM4706 is supported.
+
+config MTD_NAND_PLATFORM
+ tristate "Support for generic platform NAND driver"
+ depends on HAS_IOMEM
+ help
+ This implements a generic NAND driver for on-SOC platform
+ devices. You will need to provide platform-specific functions
+ via platform_data.
+
+config MTD_NAND_ORION
+ tristate "NAND Flash support for Marvell Orion SoC"
+ depends on PLAT_ORION
+ help
+ This enables the NAND flash controller on Orion machines.
+
+ No board specific support is done by this driver, each board
+ must advertise a platform_device for the driver to attach.
+
+config MTD_NAND_FSL_ELBC
+ tristate "NAND support for Freescale eLBC controllers"
+ depends on PPC
+ select FSL_LBC
+ help
+ Various Freescale chips, including the 8313, include a NAND Flash
+ Controller Module with built-in hardware ECC capabilities.
+ Enabling this option will enable you to use this to control
+ external NAND devices.
+
+config MTD_NAND_FSL_IFC
+ tristate "NAND support for Freescale IFC controller"
+ depends on MTD_NAND && FSL_SOC
+ select FSL_IFC
+ select MEMORY
+ help
+ Various Freescale chips e.g P1010, include a NAND Flash machine
+ with built-in hardware ECC capabilities.
+ Enabling this option will enable you to use this to control
+ external NAND devices.
+
+config MTD_NAND_FSL_UPM
+ tristate "Support for NAND on Freescale UPM"
+ depends on PPC_83xx || PPC_85xx
+ select FSL_LBC
+ help
+ Enables support for NAND Flash chips wired onto Freescale PowerPC
+ processor localbus with User-Programmable Machine support.
+
+config MTD_NAND_MPC5121_NFC
+ tristate "MPC5121 built-in NAND Flash Controller support"
+ depends on PPC_MPC512x
+ help
+ This enables the driver for the NAND flash controller on the
+ MPC5121 SoC.
+
+config MTD_NAND_VF610_NFC
+ tristate "Support for Freescale NFC for VF610/MPC5125"
+ depends on (SOC_VF610 || COMPILE_TEST)
+ help
+ Enables support for NAND Flash Controller on some Freescale
+ processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
+ The driver supports a maximum 2k page size. With 2k pages and
+ 64 bytes or more of OOB, hardware ECC with up to 32-bit error
+ correction is supported. Hardware ECC is only enabled through
+ device tree.
+
+config MTD_NAND_MXC
+ tristate "MXC NAND support"
+ depends on ARCH_MXC
+ help
+ This enables the driver for the NAND flash controller on the
+ MXC processors.
+
+config MTD_NAND_SH_FLCTL
+ tristate "Support for NAND on Renesas SuperH FLCTL"
+ depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
+ depends on HAS_IOMEM
+ depends on HAS_DMA
+ help
+ Several Renesas SuperH CPU has FLCTL. This option enables support
+ for NAND Flash using FLCTL.
+
+config MTD_NAND_DAVINCI
+ tristate "Support NAND on DaVinci/Keystone SoC"
+ depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF)
+ help
+ Enable the driver for NAND flash chips on Texas Instruments
+ DaVinci/Keystone processors.
+
+config MTD_NAND_TXX9NDFMC
+ tristate "NAND Flash support for TXx9 SoC"
+ depends on SOC_TX4938 || SOC_TX4939
+ help
+ This enables the NAND flash controller on the TXx9 SoCs.
+
+config MTD_NAND_SOCRATES
+ tristate "Support for NAND on Socrates board"
+ depends on SOCRATES
+ help
+ Enables support for NAND Flash chips wired onto Socrates board.
+
+config MTD_NAND_NUC900
+ tristate "Support for NAND on Nuvoton NUC9xx/w90p910 evaluation boards."
+ depends on ARCH_W90X900
+ help
+ This enables the driver for the NAND Flash on evaluation board based
+ on w90p910 / NUC9xx.
+
+config MTD_NAND_JZ4740
+ tristate "Support for JZ4740 SoC NAND controller"
+ depends on MACH_JZ4740
+ help
+ Enables support for NAND Flash on JZ4740 SoC based boards.
+
+config MTD_NAND_FSMC
+ tristate "Support for NAND on ST Micros FSMC"
+ depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
+ help
+ Enables support for NAND Flash chips on the ST Microelectronics
+ Flexible Static Memory Controller (FSMC)
+
+config MTD_NAND_XWAY
+ bool "Support for NAND on Lantiq XWAY SoC"
+ depends on LANTIQ && SOC_TYPE_XWAY
+ select MTD_NAND_PLATFORM
+ help
+ Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached
+ to the External Bus Unit (EBU).
+
+config MTD_NAND_SUNXI
+ tristate "Support for NAND on Allwinner SoCs"
+ depends on ARCH_SUNXI
+ help
+ Enables support for NAND Flash chips on Allwinner SoCs.
+
+config MTD_NAND_HISI504
+ tristate "Support for NAND controller on Hisilicon SoC Hip04"
+ depends on HAS_DMA
+ help
+ Enables support for NAND controller on Hisilicon SoC Hip04.
+
+endif # MTD_NAND
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
new file mode 100644
index 0000000..2c7f014
--- /dev/null
+++ b/drivers/mtd/nand/Makefile
@@ -0,0 +1,59 @@
+#
+# linux/drivers/nand/Makefile
+#
+
+obj-$(CONFIG_MTD_NAND) += nand.o
+obj-$(CONFIG_MTD_NAND_ECC) += nand_ecc.o
+obj-$(CONFIG_MTD_NAND_BCH) += nand_bch.o
+obj-$(CONFIG_MTD_NAND_IDS) += nand_ids.o
+obj-$(CONFIG_MTD_SM_COMMON) += sm_common.o
+
+obj-$(CONFIG_MTD_NAND_CAFE) += cafe_nand.o
+obj-$(CONFIG_MTD_NAND_AMS_DELTA) += ams-delta.o
+obj-$(CONFIG_MTD_NAND_DENALI) += denali.o
+obj-$(CONFIG_MTD_NAND_DENALI_PCI) += denali_pci.o
+obj-$(CONFIG_MTD_NAND_DENALI_DT) += denali_dt.o
+obj-$(CONFIG_MTD_NAND_AU1550) += au1550nd.o
+obj-$(CONFIG_MTD_NAND_BF5XX) += bf5xx_nand.o
+obj-$(CONFIG_MTD_NAND_S3C2410) += s3c2410.o
+obj-$(CONFIG_MTD_NAND_DAVINCI) += davinci_nand.o
+obj-$(CONFIG_MTD_NAND_DISKONCHIP) += diskonchip.o
+obj-$(CONFIG_MTD_NAND_DOCG4) += docg4.o
+obj-$(CONFIG_MTD_NAND_FSMC) += fsmc_nand.o
+obj-$(CONFIG_MTD_NAND_SHARPSL) += sharpsl.o
+obj-$(CONFIG_MTD_NAND_NANDSIM) += nandsim.o
+obj-$(CONFIG_MTD_NAND_CS553X) += cs553x_nand.o
+obj-$(CONFIG_MTD_NAND_NDFC) += ndfc.o
+obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
+obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o
+omap2_nand-objs := omap2.o
+obj-$(CONFIG_MTD_NAND_OMAP2) += omap2_nand.o
+obj-$(CONFIG_MTD_NAND_OMAP_BCH_BUILD) += omap_elm.o
+obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
+obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
+obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
+obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
+obj-$(CONFIG_MTD_NAND_PASEMI) += pasemi_nand.o
+obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_IFC) += fsl_ifc_nand.o
+obj-$(CONFIG_MTD_NAND_FSL_UPM) += fsl_upm.o
+obj-$(CONFIG_MTD_NAND_SLC_LPC32XX) += lpc32xx_slc.o
+obj-$(CONFIG_MTD_NAND_MLC_LPC32XX) += lpc32xx_mlc.o
+obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o
+obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
+obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
+obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
+obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o
+obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o
+obj-$(CONFIG_MTD_NAND_VF610_NFC) += vf610_nfc.o
+obj-$(CONFIG_MTD_NAND_RICOH) += r852.o
+obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/
+obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o
+obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash/
+obj-$(CONFIG_MTD_NAND_SUNXI) += sunxi_nand.o
+obj-$(CONFIG_MTD_NAND_HISI504) += hisi504_nand.o
+obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand/
+
+nand-objs := nand_base.o nand_bbt.o nand_timings.o
diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c
new file mode 100644
index 0000000..842f8fe
--- /dev/null
+++ b/drivers/mtd/nand/ams-delta.c
@@ -0,0 +1,296 @@
+/*
+ * drivers/mtd/nand/ams-delta.c
+ *
+ * Copyright (C) 2006 Jonathan McDowell <noodles@earth.li>
+ *
+ * Derived from drivers/mtd/toto.c
+ * Converted to platform driver by Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
+ * Partially stolen from drivers/mtd/nand/plat_nand.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Overview:
+ * This is a device driver for the NAND flash device found on the
+ * Amstrad E3 (Delta).
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/gpio.h>
+#include <linux/platform_data/gpio-omap.h>
+
+#include <asm/io.h>
+#include <asm/sizes.h>
+
+#include <mach/board-ams-delta.h>
+
+#include <mach/hardware.h>
+
+/*
+ * MTD structure for E3 (Delta)
+ */
+static struct mtd_info *ams_delta_mtd = NULL;
+
+/*
+ * Define partitions for flash devices
+ */
+
+static struct mtd_partition partition_info[] = {
+ { .name = "Kernel",
+ .offset = 0,
+ .size = 3 * SZ_1M + SZ_512K },
+ { .name = "u-boot",
+ .offset = 3 * SZ_1M + SZ_512K,
+ .size = SZ_256K },
+ { .name = "u-boot params",
+ .offset = 3 * SZ_1M + SZ_512K + SZ_256K,
+ .size = SZ_256K },
+ { .name = "Amstrad LDR",
+ .offset = 4 * SZ_1M,
+ .size = SZ_256K },
+ { .name = "File system",
+ .offset = 4 * SZ_1M + 1 * SZ_256K,
+ .size = 27 * SZ_1M },
+ { .name = "PBL reserved",
+ .offset = 32 * SZ_1M - 3 * SZ_256K,
+ .size = 3 * SZ_256K },
+};
+
+static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *this = mtd->priv;
+ void __iomem *io_base = this->priv;
+
+ writew(0, io_base + OMAP_MPUIO_IO_CNTL);
+ writew(byte, this->IO_ADDR_W);
+ gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 0);
+ ndelay(40);
+ gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 1);
+}
+
+static u_char ams_delta_read_byte(struct mtd_info *mtd)
+{
+ u_char res;
+ struct nand_chip *this = mtd->priv;
+ void __iomem *io_base = this->priv;
+
+ gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 0);
+ ndelay(40);
+ writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
+ res = readw(this->IO_ADDR_R);
+ gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 1);
+
+ return res;
+}
+
+static void ams_delta_write_buf(struct mtd_info *mtd, const u_char *buf,
+ int len)
+{
+ int i;
+
+ for (i=0; i<len; i++)
+ ams_delta_write_byte(mtd, buf[i]);
+}
+
+static void ams_delta_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+
+ for (i=0; i<len; i++)
+ buf[i] = ams_delta_read_byte(mtd);
+}
+
+/*
+ * Command control function
+ *
+ * ctrl:
+ * NAND_NCE: bit 0 -> bit 2
+ * NAND_CLE: bit 1 -> bit 7
+ * NAND_ALE: bit 2 -> bit 6
+ */
+static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NCE,
+ (ctrl & NAND_NCE) == 0);
+ gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_CLE,
+ (ctrl & NAND_CLE) != 0);
+ gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_ALE,
+ (ctrl & NAND_ALE) != 0);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ ams_delta_write_byte(mtd, cmd);
+}
+
+static int ams_delta_nand_ready(struct mtd_info *mtd)
+{
+ return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
+}
+
+static const struct gpio _mandatory_gpio[] = {
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NCE,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "nand_nce",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NRE,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "nand_nre",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NWP,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "nand_nwp",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_NWE,
+ .flags = GPIOF_OUT_INIT_HIGH,
+ .label = "nand_nwe",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_ALE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_ale",
+ },
+ {
+ .gpio = AMS_DELTA_GPIO_PIN_NAND_CLE,
+ .flags = GPIOF_OUT_INIT_LOW,
+ .label = "nand_cle",
+ },
+};
+
+/*
+ * Main initialization routine
+ */
+static int ams_delta_init(struct platform_device *pdev)
+{
+ struct nand_chip *this;
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ void __iomem *io_base;
+ int err = 0;
+
+ if (!res)
+ return -ENXIO;
+
+ /* Allocate memory for MTD device structure and private data */
+ ams_delta_mtd = kzalloc(sizeof(struct mtd_info) +
+ sizeof(struct nand_chip), GFP_KERNEL);
+ if (!ams_delta_mtd) {
+ printk (KERN_WARNING "Unable to allocate E3 NAND MTD device structure.\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ ams_delta_mtd->owner = THIS_MODULE;
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *) (&ams_delta_mtd[1]);
+
+ /* Link the private data with the MTD structure */
+ ams_delta_mtd->priv = this;
+
+ /*
+ * Don't try to request the memory region from here,
+ * it should have been already requested from the
+ * gpio-omap driver and requesting it again would fail.
+ */
+
+ io_base = ioremap(res->start, resource_size(res));
+ if (io_base == NULL) {
+ dev_err(&pdev->dev, "ioremap failed\n");
+ err = -EIO;
+ goto out_free;
+ }
+
+ this->priv = io_base;
+
+ /* Set address of NAND IO lines */
+ this->IO_ADDR_R = io_base + OMAP_MPUIO_INPUT_LATCH;
+ this->IO_ADDR_W = io_base + OMAP_MPUIO_OUTPUT;
+ this->read_byte = ams_delta_read_byte;
+ this->write_buf = ams_delta_write_buf;
+ this->read_buf = ams_delta_read_buf;
+ this->cmd_ctrl = ams_delta_hwcontrol;
+ if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") == 0) {
+ this->dev_ready = ams_delta_nand_ready;
+ } else {
+ this->dev_ready = NULL;
+ printk(KERN_NOTICE "Couldn't request gpio for Delta NAND ready.\n");
+ }
+ /* 25 us command delay time */
+ this->chip_delay = 30;
+ this->ecc.mode = NAND_ECC_SOFT;
+
+ platform_set_drvdata(pdev, io_base);
+
+ /* Set chip enabled, but */
+ err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
+ if (err)
+ goto out_gpio;
+
+ /* Scan to find existence of the device */
+ if (nand_scan(ams_delta_mtd, 1)) {
+ err = -ENXIO;
+ goto out_mtd;
+ }
+
+ /* Register the partitions */
+ mtd_device_register(ams_delta_mtd, partition_info,
+ ARRAY_SIZE(partition_info));
+
+ goto out;
+
+ out_mtd:
+ gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
+out_gpio:
+ gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
+ iounmap(io_base);
+out_free:
+ kfree(ams_delta_mtd);
+ out:
+ return err;
+}
+
+/*
+ * Clean up routine
+ */
+static int ams_delta_cleanup(struct platform_device *pdev)
+{
+ void __iomem *io_base = platform_get_drvdata(pdev);
+
+ /* Release resources, unregister device */
+ nand_release(ams_delta_mtd);
+
+ gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
+ gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
+ iounmap(io_base);
+
+ /* Free the MTD device structure */
+ kfree(ams_delta_mtd);
+
+ return 0;
+}
+
+static struct platform_driver ams_delta_nand_driver = {
+ .probe = ams_delta_init,
+ .remove = ams_delta_cleanup,
+ .driver = {
+ .name = "ams-delta-nand",
+ },
+};
+
+module_platform_driver(ams_delta_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jonathan McDowell <noodles@earth.li>");
+MODULE_DESCRIPTION("Glue layer for NAND flash on Amstrad E3 (Delta)");
diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c
new file mode 100644
index 0000000..583cdd9
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand.c
@@ -0,0 +1,2414 @@
+/*
+ * Copyright © 2003 Rick Bronson
+ *
+ * Derived from drivers/mtd/nand/autcpu12.c
+ * Copyright © 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ * Derived from drivers/mtd/spia.c
+ * Copyright © 2000 Steven J. Hill (sjhill@cotw.com)
+ *
+ *
+ * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263
+ * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright © 2007
+ *
+ * Derived from Das U-Boot source code
+ * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c)
+ * © Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
+ *
+ * Add Programmable Multibit ECC support for various AT91 SoC
+ * © Copyright 2012 ATMEL, Hong Xu
+ *
+ * Add Nand Flash Controller support for SAMA5 SoC
+ * © Copyright 2013 ATMEL, Josh Wu (josh.wu@atmel.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_mtd.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_data/atmel.h>
+
+static int use_dma = 1;
+module_param(use_dma, int, 0);
+
+static int on_flash_bbt = 0;
+module_param(on_flash_bbt, int, 0);
+
+/* Register access macros */
+#define ecc_readl(add, reg) \
+ __raw_readl(add + ATMEL_ECC_##reg)
+#define ecc_writel(add, reg, value) \
+ __raw_writel((value), add + ATMEL_ECC_##reg)
+
+#include "atmel_nand_ecc.h" /* Hardware ECC registers */
+#include "atmel_nand_nfc.h" /* Nand Flash Controller definition */
+
+struct atmel_nand_caps {
+ bool pmecc_correct_erase_page;
+};
+
+/* oob layout for large page size
+ * bad block info is on bytes 0 and 1
+ * the bytes have to be consecutives to avoid
+ * several NAND_CMD_RNDOUT during read
+ */
+static struct nand_ecclayout atmel_oobinfo_large = {
+ .eccbytes = 4,
+ .eccpos = {60, 61, 62, 63},
+ .oobfree = {
+ {2, 58}
+ },
+};
+
+/* oob layout for small page size
+ * bad block info is on bytes 4 and 5
+ * the bytes have to be consecutives to avoid
+ * several NAND_CMD_RNDOUT during read
+ */
+static struct nand_ecclayout atmel_oobinfo_small = {
+ .eccbytes = 4,
+ .eccpos = {0, 1, 2, 3},
+ .oobfree = {
+ {6, 10}
+ },
+};
+
+struct atmel_nfc {
+ void __iomem *base_cmd_regs;
+ void __iomem *hsmc_regs;
+ void *sram_bank0;
+ dma_addr_t sram_bank0_phys;
+ bool use_nfc_sram;
+ bool write_by_sram;
+
+ struct clk *clk;
+
+ bool is_initialized;
+ struct completion comp_ready;
+ struct completion comp_cmd_done;
+ struct completion comp_xfer_done;
+
+ /* Point to the sram bank which include readed data via NFC */
+ void *data_in_sram;
+ bool will_write_sram;
+};
+static struct atmel_nfc nand_nfc;
+
+struct atmel_nand_host {
+ struct nand_chip nand_chip;
+ struct mtd_info mtd;
+ void __iomem *io_base;
+ dma_addr_t io_phys;
+ struct atmel_nand_data board;
+ struct device *dev;
+ void __iomem *ecc;
+
+ struct completion comp;
+ struct dma_chan *dma_chan;
+
+ struct atmel_nfc *nfc;
+
+ struct atmel_nand_caps *caps;
+ bool has_pmecc;
+ u8 pmecc_corr_cap;
+ u16 pmecc_sector_size;
+ bool has_no_lookup_table;
+ u32 pmecc_lookup_table_offset;
+ u32 pmecc_lookup_table_offset_512;
+ u32 pmecc_lookup_table_offset_1024;
+
+ int pmecc_degree; /* Degree of remainders */
+ int pmecc_cw_len; /* Length of codeword */
+
+ void __iomem *pmerrloc_base;
+ void __iomem *pmecc_rom_base;
+
+ /* lookup table for alpha_to and index_of */
+ void __iomem *pmecc_alpha_to;
+ void __iomem *pmecc_index_of;
+
+ /* data for pmecc computation */
+ int16_t *pmecc_partial_syn;
+ int16_t *pmecc_si;
+ int16_t *pmecc_smu; /* Sigma table */
+ int16_t *pmecc_lmu; /* polynomal order */
+ int *pmecc_mu;
+ int *pmecc_dmu;
+ int *pmecc_delta;
+};
+
+static struct nand_ecclayout atmel_pmecc_oobinfo;
+
+/*
+ * Enable NAND.
+ */
+static void atmel_nand_enable(struct atmel_nand_host *host)
+{
+ if (gpio_is_valid(host->board.enable_pin))
+ gpio_set_value(host->board.enable_pin, 0);
+}
+
+/*
+ * Disable NAND.
+ */
+static void atmel_nand_disable(struct atmel_nand_host *host)
+{
+ if (gpio_is_valid(host->board.enable_pin))
+ gpio_set_value(host->board.enable_pin, 1);
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void atmel_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_NCE)
+ atmel_nand_enable(host);
+ else
+ atmel_nand_disable(host);
+ }
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, host->io_base + (1 << host->board.cle));
+ else
+ writeb(cmd, host->io_base + (1 << host->board.ale));
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int atmel_nand_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+
+ return gpio_get_value(host->board.rdy_pin) ^
+ !!host->board.rdy_pin_active_low;
+}
+
+/* Set up for hardware ready pin and enable pin. */
+static int atmel_nand_set_enable_ready_pins(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
+ int res = 0;
+
+ if (gpio_is_valid(host->board.rdy_pin)) {
+ res = devm_gpio_request(host->dev,
+ host->board.rdy_pin, "nand_rdy");
+ if (res < 0) {
+ dev_err(host->dev,
+ "can't request rdy gpio %d\n",
+ host->board.rdy_pin);
+ return res;
+ }
+
+ res = gpio_direction_input(host->board.rdy_pin);
+ if (res < 0) {
+ dev_err(host->dev,
+ "can't request input direction rdy gpio %d\n",
+ host->board.rdy_pin);
+ return res;
+ }
+
+ chip->dev_ready = atmel_nand_device_ready;
+ }
+
+ if (gpio_is_valid(host->board.enable_pin)) {
+ res = devm_gpio_request(host->dev,
+ host->board.enable_pin, "nand_enable");
+ if (res < 0) {
+ dev_err(host->dev,
+ "can't request enable gpio %d\n",
+ host->board.enable_pin);
+ return res;
+ }
+
+ res = gpio_direction_output(host->board.enable_pin, 1);
+ if (res < 0) {
+ dev_err(host->dev,
+ "can't request output direction enable gpio %d\n",
+ host->board.enable_pin);
+ return res;
+ }
+ }
+
+ return res;
+}
+
+/*
+ * Minimal-overhead PIO for data access.
+ */
+static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+
+ if (host->nfc && host->nfc->use_nfc_sram && host->nfc->data_in_sram) {
+ memcpy(buf, host->nfc->data_in_sram, len);
+ host->nfc->data_in_sram += len;
+ } else {
+ __raw_readsb(nand_chip->IO_ADDR_R, buf, len);
+ }
+}
+
+static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+
+ if (host->nfc && host->nfc->use_nfc_sram && host->nfc->data_in_sram) {
+ memcpy(buf, host->nfc->data_in_sram, len);
+ host->nfc->data_in_sram += len;
+ } else {
+ __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2);
+ }
+}
+
+static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesb(nand_chip->IO_ADDR_W, buf, len);
+}
+
+static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+
+ __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2);
+}
+
+static void dma_complete_func(void *completion)
+{
+ complete(completion);
+}
+
+static int nfc_set_sram_bank(struct atmel_nand_host *host, unsigned int bank)
+{
+ /* NFC only has two banks. Must be 0 or 1 */
+ if (bank > 1)
+ return -EINVAL;
+
+ if (bank) {
+ /* Only for a 2k-page or lower flash, NFC can handle 2 banks */
+ if (host->mtd.writesize > 2048)
+ return -EINVAL;
+ nfc_writel(host->nfc->hsmc_regs, BANK, ATMEL_HSMC_NFC_BANK1);
+ } else {
+ nfc_writel(host->nfc->hsmc_regs, BANK, ATMEL_HSMC_NFC_BANK0);
+ }
+
+ return 0;
+}
+
+static uint nfc_get_sram_off(struct atmel_nand_host *host)
+{
+ if (nfc_readl(host->nfc->hsmc_regs, BANK) & ATMEL_HSMC_NFC_BANK1)
+ return NFC_SRAM_BANK1_OFFSET;
+ else
+ return 0;
+}
+
+static dma_addr_t nfc_sram_phys(struct atmel_nand_host *host)
+{
+ if (nfc_readl(host->nfc->hsmc_regs, BANK) & ATMEL_HSMC_NFC_BANK1)
+ return host->nfc->sram_bank0_phys + NFC_SRAM_BANK1_OFFSET;
+ else
+ return host->nfc->sram_bank0_phys;
+}
+
+static int atmel_nand_dma_op(struct mtd_info *mtd, void *buf, int len,
+ int is_read)
+{
+ struct dma_device *dma_dev;
+ enum dma_ctrl_flags flags;
+ dma_addr_t dma_src_addr, dma_dst_addr, phys_addr;
+ struct dma_async_tx_descriptor *tx = NULL;
+ dma_cookie_t cookie;
+ struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
+ void *p = buf;
+ int err = -EIO;
+ enum dma_data_direction dir = is_read ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+ struct atmel_nfc *nfc = host->nfc;
+
+ if (buf >= high_memory)
+ goto err_buf;
+
+ dma_dev = host->dma_chan->device;
+
+ flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+
+ phys_addr = dma_map_single(dma_dev->dev, p, len, dir);
+ if (dma_mapping_error(dma_dev->dev, phys_addr)) {
+ dev_err(host->dev, "Failed to dma_map_single\n");
+ goto err_buf;
+ }
+
+ if (is_read) {
+ if (nfc && nfc->data_in_sram)
+ dma_src_addr = nfc_sram_phys(host) + (nfc->data_in_sram
+ - (nfc->sram_bank0 + nfc_get_sram_off(host)));
+ else
+ dma_src_addr = host->io_phys;
+
+ dma_dst_addr = phys_addr;
+ } else {
+ dma_src_addr = phys_addr;
+
+ if (nfc && nfc->write_by_sram)
+ dma_dst_addr = nfc_sram_phys(host);
+ else
+ dma_dst_addr = host->io_phys;
+ }
+
+ tx = dma_dev->device_prep_dma_memcpy(host->dma_chan, dma_dst_addr,
+ dma_src_addr, len, flags);
+ if (!tx) {
+ dev_err(host->dev, "Failed to prepare DMA memcpy\n");
+ goto err_dma;
+ }
+
+ init_completion(&host->comp);
+ tx->callback = dma_complete_func;
+ tx->callback_param = &host->comp;
+
+ cookie = tx->tx_submit(tx);
+ if (dma_submit_error(cookie)) {
+ dev_err(host->dev, "Failed to do DMA tx_submit\n");
+ goto err_dma;
+ }
+
+ dma_async_issue_pending(host->dma_chan);
+ wait_for_completion(&host->comp);
+
+ if (is_read && nfc && nfc->data_in_sram)
+ /* After read data from SRAM, need to increase the position */
+ nfc->data_in_sram += len;
+
+ err = 0;
+
+err_dma:
+ dma_unmap_single(dma_dev->dev, phys_addr, len, dir);
+err_buf:
+ if (err != 0)
+ dev_dbg(host->dev, "Fall back to CPU I/O\n");
+ return err;
+}
+
+static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
+
+ if (use_dma && len > mtd->oobsize)
+ /* only use DMA for bigger than oob size: better performances */
+ if (atmel_nand_dma_op(mtd, buf, len, 1) == 0)
+ return;
+
+ if (host->board.bus_width_16)
+ atmel_read_buf16(mtd, buf, len);
+ else
+ atmel_read_buf8(mtd, buf, len);
+}
+
+static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
+
+ if (use_dma && len > mtd->oobsize)
+ /* only use DMA for bigger than oob size: better performances */
+ if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0)
+ return;
+
+ if (host->board.bus_width_16)
+ atmel_write_buf16(mtd, buf, len);
+ else
+ atmel_write_buf8(mtd, buf, len);
+}
+
+/*
+ * Return number of ecc bytes per sector according to sector size and
+ * correction capability
+ *
+ * Following table shows what at91 PMECC supported:
+ * Correction Capability Sector_512_bytes Sector_1024_bytes
+ * ===================== ================ =================
+ * 2-bits 4-bytes 4-bytes
+ * 4-bits 7-bytes 7-bytes
+ * 8-bits 13-bytes 14-bytes
+ * 12-bits 20-bytes 21-bytes
+ * 24-bits 39-bytes 42-bytes
+ */
+static int pmecc_get_ecc_bytes(int cap, int sector_size)
+{
+ int m = 12 + sector_size / 512;
+ return (m * cap + 7) / 8;
+}
+
+static void pmecc_config_ecc_layout(struct nand_ecclayout *layout,
+ int oobsize, int ecc_len)
+{
+ int i;
+
+ layout->eccbytes = ecc_len;
+
+ /* ECC will occupy the last ecc_len bytes continuously */
+ for (i = 0; i < ecc_len; i++)
+ layout->eccpos[i] = oobsize - ecc_len + i;
+
+ layout->oobfree[0].offset = PMECC_OOB_RESERVED_BYTES;
+ layout->oobfree[0].length =
+ oobsize - ecc_len - layout->oobfree[0].offset;
+}
+
+static void __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host)
+{
+ int table_size;
+
+ table_size = host->pmecc_sector_size == 512 ?
+ PMECC_LOOKUP_TABLE_SIZE_512 : PMECC_LOOKUP_TABLE_SIZE_1024;
+
+ return host->pmecc_rom_base + host->pmecc_lookup_table_offset +
+ table_size * sizeof(int16_t);
+}
+
+static int pmecc_data_alloc(struct atmel_nand_host *host)
+{
+ const int cap = host->pmecc_corr_cap;
+ int size;
+
+ size = (2 * cap + 1) * sizeof(int16_t);
+ host->pmecc_partial_syn = devm_kzalloc(host->dev, size, GFP_KERNEL);
+ host->pmecc_si = devm_kzalloc(host->dev, size, GFP_KERNEL);
+ host->pmecc_lmu = devm_kzalloc(host->dev,
+ (cap + 1) * sizeof(int16_t), GFP_KERNEL);
+ host->pmecc_smu = devm_kzalloc(host->dev,
+ (cap + 2) * size, GFP_KERNEL);
+
+ size = (cap + 1) * sizeof(int);
+ host->pmecc_mu = devm_kzalloc(host->dev, size, GFP_KERNEL);
+ host->pmecc_dmu = devm_kzalloc(host->dev, size, GFP_KERNEL);
+ host->pmecc_delta = devm_kzalloc(host->dev, size, GFP_KERNEL);
+
+ if (!host->pmecc_partial_syn ||
+ !host->pmecc_si ||
+ !host->pmecc_lmu ||
+ !host->pmecc_smu ||
+ !host->pmecc_mu ||
+ !host->pmecc_dmu ||
+ !host->pmecc_delta)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int i;
+ uint32_t value;
+
+ /* Fill odd syndromes */
+ for (i = 0; i < host->pmecc_corr_cap; i++) {
+ value = pmecc_readl_rem_relaxed(host->ecc, sector, i / 2);
+ if (i & 1)
+ value >>= 16;
+ value &= 0xffff;
+ host->pmecc_partial_syn[(2 * i) + 1] = (int16_t)value;
+ }
+}
+
+static void pmecc_substitute(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int16_t __iomem *alpha_to = host->pmecc_alpha_to;
+ int16_t __iomem *index_of = host->pmecc_index_of;
+ int16_t *partial_syn = host->pmecc_partial_syn;
+ const int cap = host->pmecc_corr_cap;
+ int16_t *si;
+ int i, j;
+
+ /* si[] is a table that holds the current syndrome value,
+ * an element of that table belongs to the field
+ */
+ si = host->pmecc_si;
+
+ memset(&si[1], 0, sizeof(int16_t) * (2 * cap - 1));
+
+ /* Computation 2t syndromes based on S(x) */
+ /* Odd syndromes */
+ for (i = 1; i < 2 * cap; i += 2) {
+ for (j = 0; j < host->pmecc_degree; j++) {
+ if (partial_syn[i] & ((unsigned short)0x1 << j))
+ si[i] = readw_relaxed(alpha_to + i * j) ^ si[i];
+ }
+ }
+ /* Even syndrome = (Odd syndrome) ** 2 */
+ for (i = 2, j = 1; j <= cap; i = ++j << 1) {
+ if (si[j] == 0) {
+ si[i] = 0;
+ } else {
+ int16_t tmp;
+
+ tmp = readw_relaxed(index_of + si[j]);
+ tmp = (tmp * 2) % host->pmecc_cw_len;
+ si[i] = readw_relaxed(alpha_to + tmp);
+ }
+ }
+
+ return;
+}
+
+static void pmecc_get_sigma(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+
+ int16_t *lmu = host->pmecc_lmu;
+ int16_t *si = host->pmecc_si;
+ int *mu = host->pmecc_mu;
+ int *dmu = host->pmecc_dmu; /* Discrepancy */
+ int *delta = host->pmecc_delta; /* Delta order */
+ int cw_len = host->pmecc_cw_len;
+ const int16_t cap = host->pmecc_corr_cap;
+ const int num = 2 * cap + 1;
+ int16_t __iomem *index_of = host->pmecc_index_of;
+ int16_t __iomem *alpha_to = host->pmecc_alpha_to;
+ int i, j, k;
+ uint32_t dmu_0_count, tmp;
+ int16_t *smu = host->pmecc_smu;
+
+ /* index of largest delta */
+ int ro;
+ int largest;
+ int diff;
+
+ dmu_0_count = 0;
+
+ /* First Row */
+
+ /* Mu */
+ mu[0] = -1;
+
+ memset(smu, 0, sizeof(int16_t) * num);
+ smu[0] = 1;
+
+ /* discrepancy set to 1 */
+ dmu[0] = 1;
+ /* polynom order set to 0 */
+ lmu[0] = 0;
+ delta[0] = (mu[0] * 2 - lmu[0]) >> 1;
+
+ /* Second Row */
+
+ /* Mu */
+ mu[1] = 0;
+ /* Sigma(x) set to 1 */
+ memset(&smu[num], 0, sizeof(int16_t) * num);
+ smu[num] = 1;
+
+ /* discrepancy set to S1 */
+ dmu[1] = si[1];
+
+ /* polynom order set to 0 */
+ lmu[1] = 0;
+
+ delta[1] = (mu[1] * 2 - lmu[1]) >> 1;
+
+ /* Init the Sigma(x) last row */
+ memset(&smu[(cap + 1) * num], 0, sizeof(int16_t) * num);
+
+ for (i = 1; i <= cap; i++) {
+ mu[i + 1] = i << 1;
+ /* Begin Computing Sigma (Mu+1) and L(mu) */
+ /* check if discrepancy is set to 0 */
+ if (dmu[i] == 0) {
+ dmu_0_count++;
+
+ tmp = ((cap - (lmu[i] >> 1) - 1) / 2);
+ if ((cap - (lmu[i] >> 1) - 1) & 0x1)
+ tmp += 2;
+ else
+ tmp += 1;
+
+ if (dmu_0_count == tmp) {
+ for (j = 0; j <= (lmu[i] >> 1) + 1; j++)
+ smu[(cap + 1) * num + j] =
+ smu[i * num + j];
+
+ lmu[cap + 1] = lmu[i];
+ return;
+ }
+
+ /* copy polynom */
+ for (j = 0; j <= lmu[i] >> 1; j++)
+ smu[(i + 1) * num + j] = smu[i * num + j];
+
+ /* copy previous polynom order to the next */
+ lmu[i + 1] = lmu[i];
+ } else {
+ ro = 0;
+ largest = -1;
+ /* find largest delta with dmu != 0 */
+ for (j = 0; j < i; j++) {
+ if ((dmu[j]) && (delta[j] > largest)) {
+ largest = delta[j];
+ ro = j;
+ }
+ }
+
+ /* compute difference */
+ diff = (mu[i] - mu[ro]);
+
+ /* Compute degree of the new smu polynomial */
+ if ((lmu[i] >> 1) > ((lmu[ro] >> 1) + diff))
+ lmu[i + 1] = lmu[i];
+ else
+ lmu[i + 1] = ((lmu[ro] >> 1) + diff) * 2;
+
+ /* Init smu[i+1] with 0 */
+ for (k = 0; k < num; k++)
+ smu[(i + 1) * num + k] = 0;
+
+ /* Compute smu[i+1] */
+ for (k = 0; k <= lmu[ro] >> 1; k++) {
+ int16_t a, b, c;
+
+ if (!(smu[ro * num + k] && dmu[i]))
+ continue;
+ a = readw_relaxed(index_of + dmu[i]);
+ b = readw_relaxed(index_of + dmu[ro]);
+ c = readw_relaxed(index_of + smu[ro * num + k]);
+ tmp = a + (cw_len - b) + c;
+ a = readw_relaxed(alpha_to + tmp % cw_len);
+ smu[(i + 1) * num + (k + diff)] = a;
+ }
+
+ for (k = 0; k <= lmu[i] >> 1; k++)
+ smu[(i + 1) * num + k] ^= smu[i * num + k];
+ }
+
+ /* End Computing Sigma (Mu+1) and L(mu) */
+ /* In either case compute delta */
+ delta[i + 1] = (mu[i + 1] * 2 - lmu[i + 1]) >> 1;
+
+ /* Do not compute discrepancy for the last iteration */
+ if (i >= cap)
+ continue;
+
+ for (k = 0; k <= (lmu[i + 1] >> 1); k++) {
+ tmp = 2 * (i - 1);
+ if (k == 0) {
+ dmu[i + 1] = si[tmp + 3];
+ } else if (smu[(i + 1) * num + k] && si[tmp + 3 - k]) {
+ int16_t a, b, c;
+ a = readw_relaxed(index_of +
+ smu[(i + 1) * num + k]);
+ b = si[2 * (i - 1) + 3 - k];
+ c = readw_relaxed(index_of + b);
+ tmp = a + c;
+ tmp %= cw_len;
+ dmu[i + 1] = readw_relaxed(alpha_to + tmp) ^
+ dmu[i + 1];
+ }
+ }
+ }
+
+ return;
+}
+
+static int pmecc_err_location(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ unsigned long end_time;
+ const int cap = host->pmecc_corr_cap;
+ const int num = 2 * cap + 1;
+ int sector_size = host->pmecc_sector_size;
+ int err_nbr = 0; /* number of error */
+ int roots_nbr; /* number of roots */
+ int i;
+ uint32_t val;
+ int16_t *smu = host->pmecc_smu;
+
+ pmerrloc_writel(host->pmerrloc_base, ELDIS, PMERRLOC_DISABLE);
+
+ for (i = 0; i <= host->pmecc_lmu[cap + 1] >> 1; i++) {
+ pmerrloc_writel_sigma_relaxed(host->pmerrloc_base, i,
+ smu[(cap + 1) * num + i]);
+ err_nbr++;
+ }
+
+ val = (err_nbr - 1) << 16;
+ if (sector_size == 1024)
+ val |= 1;
+
+ pmerrloc_writel(host->pmerrloc_base, ELCFG, val);
+ pmerrloc_writel(host->pmerrloc_base, ELEN,
+ sector_size * 8 + host->pmecc_degree * cap);
+
+ end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS);
+ while (!(pmerrloc_readl_relaxed(host->pmerrloc_base, ELISR)
+ & PMERRLOC_CALC_DONE)) {
+ if (unlikely(time_after(jiffies, end_time))) {
+ dev_err(host->dev, "PMECC: Timeout to calculate error location.\n");
+ return -1;
+ }
+ cpu_relax();
+ }
+
+ roots_nbr = (pmerrloc_readl_relaxed(host->pmerrloc_base, ELISR)
+ & PMERRLOC_ERR_NUM_MASK) >> 8;
+ /* Number of roots == degree of smu hence <= cap */
+ if (roots_nbr == host->pmecc_lmu[cap + 1] >> 1)
+ return err_nbr - 1;
+
+ /* Number of roots does not match the degree of smu
+ * unable to correct error */
+ return -1;
+}
+
+static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc,
+ int sector_num, int extra_bytes, int err_nbr)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int i = 0;
+ int byte_pos, bit_pos, sector_size, pos;
+ uint32_t tmp;
+ uint8_t err_byte;
+
+ sector_size = host->pmecc_sector_size;
+
+ while (err_nbr) {
+ tmp = pmerrloc_readl_el_relaxed(host->pmerrloc_base, i) - 1;
+ byte_pos = tmp / 8;
+ bit_pos = tmp % 8;
+
+ if (byte_pos >= (sector_size + extra_bytes))
+ BUG(); /* should never happen */
+
+ if (byte_pos < sector_size) {
+ err_byte = *(buf + byte_pos);
+ *(buf + byte_pos) ^= (1 << bit_pos);
+
+ pos = sector_num * host->pmecc_sector_size + byte_pos;
+ dev_info(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ pos, bit_pos, err_byte, *(buf + byte_pos));
+ } else {
+ /* Bit flip in OOB area */
+ tmp = sector_num * nand_chip->ecc.bytes
+ + (byte_pos - sector_size);
+ err_byte = ecc[tmp];
+ ecc[tmp] ^= (1 << bit_pos);
+
+ pos = tmp + nand_chip->ecc.layout->eccpos[0];
+ dev_info(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n",
+ pos, bit_pos, err_byte, ecc[tmp]);
+ }
+
+ i++;
+ err_nbr--;
+ }
+
+ return;
+}
+
+static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf,
+ u8 *ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ int i, err_nbr;
+ uint8_t *buf_pos;
+ int max_bitflips = 0;
+
+ /* If can correct bitfilps from erased page, do the normal check */
+ if (host->caps->pmecc_correct_erase_page)
+ goto normal_check;
+
+ for (i = 0; i < nand_chip->ecc.total; i++)
+ if (ecc[i] != 0xff)
+ goto normal_check;
+ /* Erased page, return OK */
+ return 0;
+
+normal_check:
+ for (i = 0; i < nand_chip->ecc.steps; i++) {
+ err_nbr = 0;
+ if (pmecc_stat & 0x1) {
+ buf_pos = buf + i * host->pmecc_sector_size;
+
+ pmecc_gen_syndrome(mtd, i);
+ pmecc_substitute(mtd);
+ pmecc_get_sigma(mtd);
+
+ err_nbr = pmecc_err_location(mtd);
+ if (err_nbr == -1) {
+ dev_err(host->dev, "PMECC: Too many errors\n");
+ mtd->ecc_stats.failed++;
+ return -EIO;
+ } else {
+ pmecc_correct_data(mtd, buf_pos, ecc, i,
+ nand_chip->ecc.bytes, err_nbr);
+ mtd->ecc_stats.corrected += err_nbr;
+ max_bitflips = max_t(int, max_bitflips, err_nbr);
+ }
+ }
+ pmecc_stat >>= 1;
+ }
+
+ return max_bitflips;
+}
+
+static void pmecc_enable(struct atmel_nand_host *host, int ecc_op)
+{
+ u32 val;
+
+ if (ecc_op != NAND_ECC_READ && ecc_op != NAND_ECC_WRITE) {
+ dev_err(host->dev, "atmel_nand: wrong pmecc operation type!");
+ return;
+ }
+
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+ val = pmecc_readl_relaxed(host->ecc, CFG);
+
+ if (ecc_op == NAND_ECC_READ)
+ pmecc_writel(host->ecc, CFG, (val & ~PMECC_CFG_WRITE_OP)
+ | PMECC_CFG_AUTO_ENABLE);
+ else
+ pmecc_writel(host->ecc, CFG, (val | PMECC_CFG_WRITE_OP)
+ & ~PMECC_CFG_AUTO_ENABLE);
+
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA);
+}
+
+static int atmel_nand_pmecc_read_page(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
+{
+ struct atmel_nand_host *host = chip->priv;
+ int eccsize = chip->ecc.size * chip->ecc.steps;
+ uint8_t *oob = chip->oob_poi;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint32_t stat;
+ unsigned long end_time;
+ int bitflips = 0;
+
+ if (!host->nfc || !host->nfc->use_nfc_sram)
+ pmecc_enable(host, NAND_ECC_READ);
+
+ chip->read_buf(mtd, buf, eccsize);
+ chip->read_buf(mtd, oob, mtd->oobsize);
+
+ end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS);
+ while ((pmecc_readl_relaxed(host->ecc, SR) & PMECC_SR_BUSY)) {
+ if (unlikely(time_after(jiffies, end_time))) {
+ dev_err(host->dev, "PMECC: Timeout to get error status.\n");
+ return -EIO;
+ }
+ cpu_relax();
+ }
+
+ stat = pmecc_readl_relaxed(host->ecc, ISR);
+ if (stat != 0) {
+ bitflips = pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]);
+ if (bitflips < 0)
+ /* uncorrectable errors */
+ return 0;
+ }
+
+ return bitflips;
+}
+
+static int atmel_nand_pmecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int oob_required,
+ int page)
+{
+ struct atmel_nand_host *host = chip->priv;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ int i, j;
+ unsigned long end_time;
+
+ if (!host->nfc || !host->nfc->write_by_sram) {
+ pmecc_enable(host, NAND_ECC_WRITE);
+ chip->write_buf(mtd, (u8 *)buf, mtd->writesize);
+ }
+
+ end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS);
+ while ((pmecc_readl_relaxed(host->ecc, SR) & PMECC_SR_BUSY)) {
+ if (unlikely(time_after(jiffies, end_time))) {
+ dev_err(host->dev, "PMECC: Timeout to get ECC value.\n");
+ return -EIO;
+ }
+ cpu_relax();
+ }
+
+ for (i = 0; i < chip->ecc.steps; i++) {
+ for (j = 0; j < chip->ecc.bytes; j++) {
+ int pos;
+
+ pos = i * chip->ecc.bytes + j;
+ chip->oob_poi[eccpos[pos]] =
+ pmecc_readb_ecc_relaxed(host->ecc, i, j);
+ }
+ }
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static void atmel_pmecc_core_init(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ uint32_t val = 0;
+ struct nand_ecclayout *ecc_layout;
+
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+
+ switch (host->pmecc_corr_cap) {
+ case 2:
+ val = PMECC_CFG_BCH_ERR2;
+ break;
+ case 4:
+ val = PMECC_CFG_BCH_ERR4;
+ break;
+ case 8:
+ val = PMECC_CFG_BCH_ERR8;
+ break;
+ case 12:
+ val = PMECC_CFG_BCH_ERR12;
+ break;
+ case 24:
+ val = PMECC_CFG_BCH_ERR24;
+ break;
+ }
+
+ if (host->pmecc_sector_size == 512)
+ val |= PMECC_CFG_SECTOR512;
+ else if (host->pmecc_sector_size == 1024)
+ val |= PMECC_CFG_SECTOR1024;
+
+ switch (nand_chip->ecc.steps) {
+ case 1:
+ val |= PMECC_CFG_PAGE_1SECTOR;
+ break;
+ case 2:
+ val |= PMECC_CFG_PAGE_2SECTORS;
+ break;
+ case 4:
+ val |= PMECC_CFG_PAGE_4SECTORS;
+ break;
+ case 8:
+ val |= PMECC_CFG_PAGE_8SECTORS;
+ break;
+ }
+
+ val |= (PMECC_CFG_READ_OP | PMECC_CFG_SPARE_DISABLE
+ | PMECC_CFG_AUTO_DISABLE);
+ pmecc_writel(host->ecc, CFG, val);
+
+ ecc_layout = nand_chip->ecc.layout;
+ pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1);
+ pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]);
+ pmecc_writel(host->ecc, EADDR,
+ ecc_layout->eccpos[ecc_layout->eccbytes - 1]);
+ /* See datasheet about PMECC Clock Control Register */
+ pmecc_writel(host->ecc, CLK, 2);
+ pmecc_writel(host->ecc, IDR, 0xff);
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE);
+}
+
+/*
+ * Get minimum ecc requirements from NAND.
+ * If pmecc-cap, pmecc-sector-size in DTS are not specified, this function
+ * will set them according to minimum ecc requirement. Otherwise, use the
+ * value in DTS file.
+ * return 0 if success. otherwise return error code.
+ */
+static int pmecc_choose_ecc(struct atmel_nand_host *host,
+ int *cap, int *sector_size)
+{
+ /* Get minimum ECC requirements */
+ if (host->nand_chip.ecc_strength_ds) {
+ *cap = host->nand_chip.ecc_strength_ds;
+ *sector_size = host->nand_chip.ecc_step_ds;
+ dev_info(host->dev, "minimum ECC: %d bits in %d bytes\n",
+ *cap, *sector_size);
+ } else {
+ *cap = 2;
+ *sector_size = 512;
+ dev_info(host->dev, "can't detect min. ECC, assume 2 bits in 512 bytes\n");
+ }
+
+ /* If device tree doesn't specify, use NAND's minimum ECC parameters */
+ if (host->pmecc_corr_cap == 0) {
+ /* use the most fitable ecc bits (the near bigger one ) */
+ if (*cap <= 2)
+ host->pmecc_corr_cap = 2;
+ else if (*cap <= 4)
+ host->pmecc_corr_cap = 4;
+ else if (*cap <= 8)
+ host->pmecc_corr_cap = 8;
+ else if (*cap <= 12)
+ host->pmecc_corr_cap = 12;
+ else if (*cap <= 24)
+ host->pmecc_corr_cap = 24;
+ else
+ return -EINVAL;
+ }
+ if (host->pmecc_sector_size == 0) {
+ /* use the most fitable sector size (the near smaller one ) */
+ if (*sector_size >= 1024)
+ host->pmecc_sector_size = 1024;
+ else if (*sector_size >= 512)
+ host->pmecc_sector_size = 512;
+ else
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static inline int deg(unsigned int poly)
+{
+ /* polynomial degree is the most-significant bit index */
+ return fls(poly) - 1;
+}
+
+static int build_gf_tables(int mm, unsigned int poly,
+ int16_t *index_of, int16_t *alpha_to)
+{
+ unsigned int i, x = 1;
+ const unsigned int k = 1 << deg(poly);
+ unsigned int nn = (1 << mm) - 1;
+
+ /* primitive polynomial must be of degree m */
+ if (k != (1u << mm))
+ return -EINVAL;
+
+ for (i = 0; i < nn; i++) {
+ alpha_to[i] = x;
+ index_of[x] = i;
+ if (i && (x == 1))
+ /* polynomial is not primitive (a^i=1 with 0<i<2^m-1) */
+ return -EINVAL;
+ x <<= 1;
+ if (x & k)
+ x ^= poly;
+ }
+ alpha_to[nn] = 1;
+ index_of[0] = 0;
+
+ return 0;
+}
+
+static uint16_t *create_lookup_table(struct device *dev, int sector_size)
+{
+ int degree = (sector_size == 512) ?
+ PMECC_GF_DIMENSION_13 :
+ PMECC_GF_DIMENSION_14;
+ unsigned int poly = (sector_size == 512) ?
+ PMECC_GF_13_PRIMITIVE_POLY :
+ PMECC_GF_14_PRIMITIVE_POLY;
+ int table_size = (sector_size == 512) ?
+ PMECC_LOOKUP_TABLE_SIZE_512 :
+ PMECC_LOOKUP_TABLE_SIZE_1024;
+
+ int16_t *addr = devm_kzalloc(dev, 2 * table_size * sizeof(uint16_t),
+ GFP_KERNEL);
+ if (addr && build_gf_tables(degree, poly, addr, addr + table_size))
+ return NULL;
+
+ return addr;
+}
+
+static int atmel_pmecc_nand_init_params(struct platform_device *pdev,
+ struct atmel_nand_host *host)
+{
+ struct mtd_info *mtd = &host->mtd;
+ struct nand_chip *nand_chip = &host->nand_chip;
+ struct resource *regs, *regs_pmerr, *regs_rom;
+ uint16_t *galois_table;
+ int cap, sector_size, err_no;
+
+ err_no = pmecc_choose_ecc(host, &cap, §or_size);
+ if (err_no) {
+ dev_err(host->dev, "The NAND flash's ECC requirement are not support!");
+ return err_no;
+ }
+
+ if (cap > host->pmecc_corr_cap ||
+ sector_size != host->pmecc_sector_size)
+ dev_info(host->dev, "WARNING: Be Caution! Using different PMECC parameters from Nand ONFI ECC reqirement.\n");
+
+ cap = host->pmecc_corr_cap;
+ sector_size = host->pmecc_sector_size;
+ host->pmecc_lookup_table_offset = (sector_size == 512) ?
+ host->pmecc_lookup_table_offset_512 :
+ host->pmecc_lookup_table_offset_1024;
+
+ dev_info(host->dev, "Initialize PMECC params, cap: %d, sector: %d\n",
+ cap, sector_size);
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!regs) {
+ dev_warn(host->dev,
+ "Can't get I/O resource regs for PMECC controller, rolling back on software ECC\n");
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ return 0;
+ }
+
+ host->ecc = devm_ioremap_resource(&pdev->dev, regs);
+ if (IS_ERR(host->ecc)) {
+ err_no = PTR_ERR(host->ecc);
+ goto err;
+ }
+
+ regs_pmerr = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ host->pmerrloc_base = devm_ioremap_resource(&pdev->dev, regs_pmerr);
+ if (IS_ERR(host->pmerrloc_base)) {
+ err_no = PTR_ERR(host->pmerrloc_base);
+ goto err;
+ }
+
+ if (!host->has_no_lookup_table) {
+ regs_rom = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+ host->pmecc_rom_base = devm_ioremap_resource(&pdev->dev,
+ regs_rom);
+ if (IS_ERR(host->pmecc_rom_base)) {
+ dev_err(host->dev, "Can not get I/O resource for ROM, will build a lookup table in runtime!\n");
+ host->has_no_lookup_table = true;
+ }
+ }
+
+ if (host->has_no_lookup_table) {
+ /* Build the look-up table in runtime */
+ galois_table = create_lookup_table(host->dev, sector_size);
+ if (!galois_table) {
+ dev_err(host->dev, "Failed to build a lookup table in runtime!\n");
+ err_no = -EINVAL;
+ goto err;
+ }
+
+ host->pmecc_rom_base = (void __iomem *)galois_table;
+ host->pmecc_lookup_table_offset = 0;
+ }
+
+ nand_chip->ecc.size = sector_size;
+
+ /* set ECC page size and oob layout */
+ switch (mtd->writesize) {
+ case 512:
+ case 1024:
+ case 2048:
+ case 4096:
+ case 8192:
+ if (sector_size > mtd->writesize) {
+ dev_err(host->dev, "pmecc sector size is bigger than the page size!\n");
+ err_no = -EINVAL;
+ goto err;
+ }
+
+ host->pmecc_degree = (sector_size == 512) ?
+ PMECC_GF_DIMENSION_13 : PMECC_GF_DIMENSION_14;
+ host->pmecc_cw_len = (1 << host->pmecc_degree) - 1;
+ host->pmecc_alpha_to = pmecc_get_alpha_to(host);
+ host->pmecc_index_of = host->pmecc_rom_base +
+ host->pmecc_lookup_table_offset;
+
+ nand_chip->ecc.strength = cap;
+ nand_chip->ecc.bytes = pmecc_get_ecc_bytes(cap, sector_size);
+ nand_chip->ecc.steps = mtd->writesize / sector_size;
+ nand_chip->ecc.total = nand_chip->ecc.bytes *
+ nand_chip->ecc.steps;
+ if (nand_chip->ecc.total >
+ mtd->oobsize - PMECC_OOB_RESERVED_BYTES) {
+ dev_err(host->dev, "No room for ECC bytes\n");
+ err_no = -EINVAL;
+ goto err;
+ }
+ pmecc_config_ecc_layout(&atmel_pmecc_oobinfo,
+ mtd->oobsize,
+ nand_chip->ecc.total);
+
+ nand_chip->ecc.layout = &atmel_pmecc_oobinfo;
+ break;
+ default:
+ dev_warn(host->dev,
+ "Unsupported page size for PMECC, use Software ECC\n");
+ /* page size not handled by HW ECC */
+ /* switching back to soft ECC */
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ return 0;
+ }
+
+ /* Allocate data for PMECC computation */
+ err_no = pmecc_data_alloc(host);
+ if (err_no) {
+ dev_err(host->dev,
+ "Cannot allocate memory for PMECC computation!\n");
+ goto err;
+ }
+
+ nand_chip->options |= NAND_NO_SUBPAGE_WRITE;
+ nand_chip->ecc.read_page = atmel_nand_pmecc_read_page;
+ nand_chip->ecc.write_page = atmel_nand_pmecc_write_page;
+
+ atmel_pmecc_core_init(mtd);
+
+ return 0;
+
+err:
+ return err_no;
+}
+
+/*
+ * Calculate HW ECC
+ *
+ * function called after a write
+ *
+ * mtd: MTD block structure
+ * dat: raw data (unused)
+ * ecc_code: buffer for ECC
+ */
+static int atmel_nand_calculate(struct mtd_info *mtd,
+ const u_char *dat, unsigned char *ecc_code)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ unsigned int ecc_value;
+
+ /* get the first 2 ECC bytes */
+ ecc_value = ecc_readl(host->ecc, PR);
+
+ ecc_code[0] = ecc_value & 0xFF;
+ ecc_code[1] = (ecc_value >> 8) & 0xFF;
+
+ /* get the last 2 ECC bytes */
+ ecc_value = ecc_readl(host->ecc, NPR) & ATMEL_ECC_NPARITY;
+
+ ecc_code[2] = ecc_value & 0xFF;
+ ecc_code[3] = (ecc_value >> 8) & 0xFF;
+
+ return 0;
+}
+
+/*
+ * HW ECC read page function
+ *
+ * mtd: mtd info structure
+ * chip: nand chip info structure
+ * buf: buffer to store read data
+ * oob_required: caller expects OOB data read to chip->oob_poi
+ */
+static int atmel_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+ uint8_t *ecc_pos;
+ int stat;
+ unsigned int max_bitflips = 0;
+
+ /*
+ * Errata: ALE is incorrectly wired up to the ECC controller
+ * on the AP7000, so it will include the address cycles in the
+ * ECC calculation.
+ *
+ * Workaround: Reset the parity registers before reading the
+ * actual data.
+ */
+ struct atmel_nand_host *host = chip->priv;
+ if (host->board.need_reset_workaround)
+ ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+
+ /* read the page */
+ chip->read_buf(mtd, p, eccsize);
+
+ /* move to ECC position if needed */
+ if (eccpos[0] != 0) {
+ /* This only works on large pages
+ * because the ECC controller waits for
+ * NAND_CMD_RNDOUTSTART after the
+ * NAND_CMD_RNDOUT.
+ * anyway, for small pages, the eccpos[0] == 0
+ */
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+ mtd->writesize + eccpos[0], -1);
+ }
+
+ /* the ECC controller needs to read the ECC just after the data */
+ ecc_pos = oob + eccpos[0];
+ chip->read_buf(mtd, ecc_pos, eccbytes);
+
+ /* check if there's an error */
+ stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+
+ /* get back to oob start (end of page) */
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+
+ /* read the oob */
+ chip->read_buf(mtd, oob, mtd->oobsize);
+
+ return max_bitflips;
+}
+
+/*
+ * HW ECC Correction
+ *
+ * function called after a read
+ *
+ * mtd: MTD block structure
+ * dat: raw data read from the chip
+ * read_ecc: ECC from the chip (unused)
+ * isnull: unused
+ *
+ * Detect and correct a 1 bit error for a page
+ */
+static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *isnull)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+ unsigned int ecc_status;
+ unsigned int ecc_word, ecc_bit;
+
+ /* get the status from the Status Register */
+ ecc_status = ecc_readl(host->ecc, SR);
+
+ /* if there's no error */
+ if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
+ return 0;
+
+ /* get error bit offset (4 bits) */
+ ecc_bit = ecc_readl(host->ecc, PR) & ATMEL_ECC_BITADDR;
+ /* get word address (12 bits) */
+ ecc_word = ecc_readl(host->ecc, PR) & ATMEL_ECC_WORDADDR;
+ ecc_word >>= 4;
+
+ /* if there are multiple errors */
+ if (ecc_status & ATMEL_ECC_MULERR) {
+ /* check if it is a freshly erased block
+ * (filled with 0xff) */
+ if ((ecc_bit == ATMEL_ECC_BITADDR)
+ && (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
+ /* the block has just been erased, return OK */
+ return 0;
+ }
+ /* it doesn't seems to be a freshly
+ * erased block.
+ * We can't correct so many errors */
+ dev_dbg(host->dev, "atmel_nand : multiple errors detected."
+ " Unable to correct.\n");
+ return -EIO;
+ }
+
+ /* if there's a single bit error : we can correct it */
+ if (ecc_status & ATMEL_ECC_ECCERR) {
+ /* there's nothing much to do here.
+ * the bit error is on the ECC itself.
+ */
+ dev_dbg(host->dev, "atmel_nand : one bit error on ECC code."
+ " Nothing to correct\n");
+ return 0;
+ }
+
+ dev_dbg(host->dev, "atmel_nand : one bit error on data."
+ " (word offset in the page :"
+ " 0x%x bit offset : 0x%x)\n",
+ ecc_word, ecc_bit);
+ /* correct the error */
+ if (nand_chip->options & NAND_BUSWIDTH_16) {
+ /* 16 bits words */
+ ((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
+ } else {
+ /* 8 bits words */
+ dat[ecc_word] ^= (1 << ecc_bit);
+ }
+ dev_dbg(host->dev, "atmel_nand : error corrected\n");
+ return 1;
+}
+
+/*
+ * Enable HW ECC : unused on most chips
+ */
+static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+
+ if (host->board.need_reset_workaround)
+ ecc_writel(host->ecc, CR, ATMEL_ECC_RST);
+}
+
+static const struct of_device_id atmel_nand_dt_ids[];
+
+static int atmel_of_init_port(struct atmel_nand_host *host,
+ struct device_node *np)
+{
+ u32 val;
+ u32 offset[2];
+ int ecc_mode;
+ struct atmel_nand_data *board = &host->board;
+ enum of_gpio_flags flags = 0;
+
+ host->caps = (struct atmel_nand_caps *)
+ of_match_device(atmel_nand_dt_ids, host->dev)->data;
+
+ if (of_property_read_u32(np, "atmel,nand-addr-offset", &val) == 0) {
+ if (val >= 32) {
+ dev_err(host->dev, "invalid addr-offset %u\n", val);
+ return -EINVAL;
+ }
+ board->ale = val;
+ }
+
+ if (of_property_read_u32(np, "atmel,nand-cmd-offset", &val) == 0) {
+ if (val >= 32) {
+ dev_err(host->dev, "invalid cmd-offset %u\n", val);
+ return -EINVAL;
+ }
+ board->cle = val;
+ }
+
+ ecc_mode = of_get_nand_ecc_mode(np);
+
+ board->ecc_mode = ecc_mode < 0 ? NAND_ECC_SOFT : ecc_mode;
+
+ board->on_flash_bbt = of_get_nand_on_flash_bbt(np);
+
+ board->has_dma = of_property_read_bool(np, "atmel,nand-has-dma");
+
+ if (of_get_nand_bus_width(np) == 16)
+ board->bus_width_16 = 1;
+
+ board->rdy_pin = of_get_gpio_flags(np, 0, &flags);
+ board->rdy_pin_active_low = (flags == OF_GPIO_ACTIVE_LOW);
+
+ board->enable_pin = of_get_gpio(np, 1);
+ board->det_pin = of_get_gpio(np, 2);
+
+ host->has_pmecc = of_property_read_bool(np, "atmel,has-pmecc");
+
+ /* load the nfc driver if there is */
+ of_platform_populate(np, NULL, NULL, host->dev);
+
+ if (!(board->ecc_mode == NAND_ECC_HW) || !host->has_pmecc)
+ return 0; /* Not using PMECC */
+
+ /* use PMECC, get correction capability, sector size and lookup
+ * table offset.
+ * If correction bits and sector size are not specified, then find
+ * them from NAND ONFI parameters.
+ */
+ if (of_property_read_u32(np, "atmel,pmecc-cap", &val) == 0) {
+ if ((val != 2) && (val != 4) && (val != 8) && (val != 12) &&
+ (val != 24)) {
+ dev_err(host->dev,
+ "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n",
+ val);
+ return -EINVAL;
+ }
+ host->pmecc_corr_cap = (u8)val;
+ }
+
+ if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) == 0) {
+ if ((val != 512) && (val != 1024)) {
+ dev_err(host->dev,
+ "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n",
+ val);
+ return -EINVAL;
+ }
+ host->pmecc_sector_size = (u16)val;
+ }
+
+ if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset",
+ offset, 2) != 0) {
+ dev_err(host->dev, "Cannot get PMECC lookup table offset, will build a lookup table in runtime.\n");
+ host->has_no_lookup_table = true;
+ /* Will build a lookup table and initialize the offset later */
+ return 0;
+ }
+ if (!offset[0] && !offset[1]) {
+ dev_err(host->dev, "Invalid PMECC lookup table offset\n");
+ return -EINVAL;
+ }
+ host->pmecc_lookup_table_offset_512 = offset[0];
+ host->pmecc_lookup_table_offset_1024 = offset[1];
+
+ return 0;
+}
+
+static int atmel_hw_nand_init_params(struct platform_device *pdev,
+ struct atmel_nand_host *host)
+{
+ struct mtd_info *mtd = &host->mtd;
+ struct nand_chip *nand_chip = &host->nand_chip;
+ struct resource *regs;
+
+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!regs) {
+ dev_err(host->dev,
+ "Can't get I/O resource regs, use software ECC\n");
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ return 0;
+ }
+
+ host->ecc = devm_ioremap_resource(&pdev->dev, regs);
+ if (IS_ERR(host->ecc))
+ return PTR_ERR(host->ecc);
+
+ /* ECC is calculated for the whole page (1 step) */
+ nand_chip->ecc.size = mtd->writesize;
+
+ /* set ECC page size and oob layout */
+ switch (mtd->writesize) {
+ case 512:
+ nand_chip->ecc.layout = &atmel_oobinfo_small;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528);
+ break;
+ case 1024:
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056);
+ break;
+ case 2048:
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112);
+ break;
+ case 4096:
+ nand_chip->ecc.layout = &atmel_oobinfo_large;
+ ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224);
+ break;
+ default:
+ /* page size not handled by HW ECC */
+ /* switching back to soft ECC */
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ return 0;
+ }
+
+ /* set up for HW ECC */
+ nand_chip->ecc.calculate = atmel_nand_calculate;
+ nand_chip->ecc.correct = atmel_nand_correct;
+ nand_chip->ecc.hwctl = atmel_nand_hwctl;
+ nand_chip->ecc.read_page = atmel_nand_read_page;
+ nand_chip->ecc.bytes = 4;
+ nand_chip->ecc.strength = 1;
+
+ return 0;
+}
+
+static inline u32 nfc_read_status(struct atmel_nand_host *host)
+{
+ u32 err_flags = NFC_SR_DTOE | NFC_SR_UNDEF | NFC_SR_AWB | NFC_SR_ASE;
+ u32 nfc_status = nfc_readl(host->nfc->hsmc_regs, SR);
+
+ if (unlikely(nfc_status & err_flags)) {
+ if (nfc_status & NFC_SR_DTOE)
+ dev_err(host->dev, "NFC: Waiting Nand R/B Timeout Error\n");
+ else if (nfc_status & NFC_SR_UNDEF)
+ dev_err(host->dev, "NFC: Access Undefined Area Error\n");
+ else if (nfc_status & NFC_SR_AWB)
+ dev_err(host->dev, "NFC: Access memory While NFC is busy\n");
+ else if (nfc_status & NFC_SR_ASE)
+ dev_err(host->dev, "NFC: Access memory Size Error\n");
+ }
+
+ return nfc_status;
+}
+
+/* SMC interrupt service routine */
+static irqreturn_t hsmc_interrupt(int irq, void *dev_id)
+{
+ struct atmel_nand_host *host = dev_id;
+ u32 status, mask, pending;
+ irqreturn_t ret = IRQ_NONE;
+
+ status = nfc_read_status(host);
+ mask = nfc_readl(host->nfc->hsmc_regs, IMR);
+ pending = status & mask;
+
+ if (pending & NFC_SR_XFR_DONE) {
+ complete(&host->nfc->comp_xfer_done);
+ nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_XFR_DONE);
+ ret = IRQ_HANDLED;
+ }
+ if (pending & NFC_SR_RB_EDGE) {
+ complete(&host->nfc->comp_ready);
+ nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_RB_EDGE);
+ ret = IRQ_HANDLED;
+ }
+ if (pending & NFC_SR_CMD_DONE) {
+ complete(&host->nfc->comp_cmd_done);
+ nfc_writel(host->nfc->hsmc_regs, IDR, NFC_SR_CMD_DONE);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
+/* NFC(Nand Flash Controller) related functions */
+static void nfc_prepare_interrupt(struct atmel_nand_host *host, u32 flag)
+{
+ if (flag & NFC_SR_XFR_DONE)
+ init_completion(&host->nfc->comp_xfer_done);
+
+ if (flag & NFC_SR_RB_EDGE)
+ init_completion(&host->nfc->comp_ready);
+
+ if (flag & NFC_SR_CMD_DONE)
+ init_completion(&host->nfc->comp_cmd_done);
+
+ /* Enable interrupt that need to wait for */
+ nfc_writel(host->nfc->hsmc_regs, IER, flag);
+}
+
+static int nfc_wait_interrupt(struct atmel_nand_host *host, u32 flag)
+{
+ int i, index = 0;
+ struct completion *comp[3]; /* Support 3 interrupt completion */
+
+ if (flag & NFC_SR_XFR_DONE)
+ comp[index++] = &host->nfc->comp_xfer_done;
+
+ if (flag & NFC_SR_RB_EDGE)
+ comp[index++] = &host->nfc->comp_ready;
+
+ if (flag & NFC_SR_CMD_DONE)
+ comp[index++] = &host->nfc->comp_cmd_done;
+
+ if (index == 0) {
+ dev_err(host->dev, "Unknown interrupt flag: 0x%08x\n", flag);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < index; i++) {
+ if (wait_for_completion_timeout(comp[i],
+ msecs_to_jiffies(NFC_TIME_OUT_MS)))
+ continue; /* wait for next completion */
+ else
+ goto err_timeout;
+ }
+
+ return 0;
+
+err_timeout:
+ dev_err(host->dev, "Time out to wait for interrupt: 0x%08x\n", flag);
+ /* Disable the interrupt as it is not handled by interrupt handler */
+ nfc_writel(host->nfc->hsmc_regs, IDR, flag);
+ return -ETIMEDOUT;
+}
+
+static int nfc_send_command(struct atmel_nand_host *host,
+ unsigned int cmd, unsigned int addr, unsigned char cycle0)
+{
+ unsigned long timeout;
+ u32 flag = NFC_SR_CMD_DONE;
+ flag |= cmd & NFCADDR_CMD_DATAEN ? NFC_SR_XFR_DONE : 0;
+
+ dev_dbg(host->dev,
+ "nfc_cmd: 0x%08x, addr1234: 0x%08x, cycle0: 0x%02x\n",
+ cmd, addr, cycle0);
+
+ timeout = jiffies + msecs_to_jiffies(NFC_TIME_OUT_MS);
+ while (nfc_readl(host->nfc->hsmc_regs, SR) & NFC_SR_BUSY) {
+ if (time_after(jiffies, timeout)) {
+ dev_err(host->dev,
+ "Time out to wait for NFC ready!\n");
+ return -ETIMEDOUT;
+ }
+ }
+
+ nfc_prepare_interrupt(host, flag);
+ nfc_writel(host->nfc->hsmc_regs, CYCLE0, cycle0);
+ nfc_cmd_addr1234_writel(cmd, addr, host->nfc->base_cmd_regs);
+ return nfc_wait_interrupt(host, flag);
+}
+
+static int nfc_device_ready(struct mtd_info *mtd)
+{
+ u32 status, mask;
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+
+ status = nfc_read_status(host);
+ mask = nfc_readl(host->nfc->hsmc_regs, IMR);
+
+ /* The mask should be 0. If not we may lost interrupts */
+ if (unlikely(mask & status))
+ dev_err(host->dev, "Lost the interrupt flags: 0x%08x\n",
+ mask & status);
+
+ return status & NFC_SR_RB_EDGE;
+}
+
+static void nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct atmel_nand_host *host = nand_chip->priv;
+
+ if (chip == -1)
+ nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_DISABLE);
+ else
+ nfc_writel(host->nfc->hsmc_regs, CTRL, NFC_CTRL_ENABLE);
+}
+
+static int nfc_make_addr(struct mtd_info *mtd, int command, int column,
+ int page_addr, unsigned int *addr1234, unsigned int *cycle0)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ int acycle = 0;
+ unsigned char addr_bytes[8];
+ int index = 0, bit_shift;
+
+ BUG_ON(addr1234 == NULL || cycle0 == NULL);
+
+ *cycle0 = 0;
+ *addr1234 = 0;
+
+ if (column != -1) {
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
+ column >>= 1;
+ addr_bytes[acycle++] = column & 0xff;
+ if (mtd->writesize > 512)
+ addr_bytes[acycle++] = (column >> 8) & 0xff;
+ }
+
+ if (page_addr != -1) {
+ addr_bytes[acycle++] = page_addr & 0xff;
+ addr_bytes[acycle++] = (page_addr >> 8) & 0xff;
+ if (chip->chipsize > (128 << 20))
+ addr_bytes[acycle++] = (page_addr >> 16) & 0xff;
+ }
+
+ if (acycle > 4)
+ *cycle0 = addr_bytes[index++];
+
+ for (bit_shift = 0; index < acycle; bit_shift += 8)
+ *addr1234 += addr_bytes[index++] << bit_shift;
+
+ /* return acycle in cmd register */
+ return acycle << NFCADDR_CMD_ACYCLE_BIT_POS;
+}
+
+static void nfc_nand_command(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
+ unsigned long timeout;
+ unsigned int nfc_addr_cmd = 0;
+
+ unsigned int cmd1 = command << NFCADDR_CMD_CMD1_BIT_POS;
+
+ /* Set default settings: no cmd2, no addr cycle. read from nand */
+ unsigned int cmd2 = 0;
+ unsigned int vcmd2 = 0;
+ int acycle = NFCADDR_CMD_ACYCLE_NONE;
+ int csid = NFCADDR_CMD_CSID_3;
+ int dataen = NFCADDR_CMD_DATADIS;
+ int nfcwr = NFCADDR_CMD_NFCRD;
+ unsigned int addr1234 = 0;
+ unsigned int cycle0 = 0;
+ bool do_addr = true;
+ host->nfc->data_in_sram = NULL;
+
+ dev_dbg(host->dev, "%s: cmd = 0x%02x, col = 0x%08x, page = 0x%08x\n",
+ __func__, command, column, page_addr);
+
+ switch (command) {
+ case NAND_CMD_RESET:
+ nfc_addr_cmd = cmd1 | acycle | csid | dataen | nfcwr;
+ nfc_send_command(host, nfc_addr_cmd, addr1234, cycle0);
+ udelay(chip->chip_delay);
+
+ nfc_nand_command(mtd, NAND_CMD_STATUS, -1, -1);
+ timeout = jiffies + msecs_to_jiffies(NFC_TIME_OUT_MS);
+ while (!(chip->read_byte(mtd) & NAND_STATUS_READY)) {
+ if (time_after(jiffies, timeout)) {
+ dev_err(host->dev,
+ "Time out to wait status ready!\n");
+ break;
+ }
+ }
+ return;
+ case NAND_CMD_STATUS:
+ do_addr = false;
+ break;
+ case NAND_CMD_PARAM:
+ case NAND_CMD_READID:
+ do_addr = false;
+ acycle = NFCADDR_CMD_ACYCLE_1;
+ if (column != -1)
+ addr1234 = column;
+ break;
+ case NAND_CMD_RNDOUT:
+ cmd2 = NAND_CMD_RNDOUTSTART << NFCADDR_CMD_CMD2_BIT_POS;
+ vcmd2 = NFCADDR_CMD_VCMD2;
+ break;
+ case NAND_CMD_READ0:
+ case NAND_CMD_READOOB:
+ if (command == NAND_CMD_READOOB) {
+ column += mtd->writesize;
+ command = NAND_CMD_READ0; /* only READ0 is valid */
+ cmd1 = command << NFCADDR_CMD_CMD1_BIT_POS;
+ }
+ if (host->nfc->use_nfc_sram) {
+ /* Enable Data transfer to sram */
+ dataen = NFCADDR_CMD_DATAEN;
+
+ /* Need enable PMECC now, since NFC will transfer
+ * data in bus after sending nfc read command.
+ */
+ if (chip->ecc.mode == NAND_ECC_HW && host->has_pmecc)
+ pmecc_enable(host, NAND_ECC_READ);
+ }
+
+ cmd2 = NAND_CMD_READSTART << NFCADDR_CMD_CMD2_BIT_POS;
+ vcmd2 = NFCADDR_CMD_VCMD2;
+ break;
+ /* For prgramming command, the cmd need set to write enable */
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
+ nfcwr = NFCADDR_CMD_NFCWR;
+ if (host->nfc->will_write_sram && command == NAND_CMD_SEQIN)
+ dataen = NFCADDR_CMD_DATAEN;
+ break;
+ default:
+ break;
+ }
+
+ if (do_addr)
+ acycle = nfc_make_addr(mtd, command, column, page_addr,
+ &addr1234, &cycle0);
+
+ nfc_addr_cmd = cmd1 | cmd2 | vcmd2 | acycle | csid | dataen | nfcwr;
+ nfc_send_command(host, nfc_addr_cmd, addr1234, cycle0);
+
+ /*
+ * Program and erase have their own busy handlers status, sequential
+ * in, and deplete1 need no delay.
+ */
+ switch (command) {
+ case NAND_CMD_CACHEDPROG:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_RNDIN:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_RNDOUT:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_READID:
+ return;
+
+ case NAND_CMD_READ0:
+ if (dataen == NFCADDR_CMD_DATAEN) {
+ host->nfc->data_in_sram = host->nfc->sram_bank0 +
+ nfc_get_sram_off(host);
+ return;
+ }
+ /* fall through */
+ default:
+ nfc_prepare_interrupt(host, NFC_SR_RB_EDGE);
+ nfc_wait_interrupt(host, NFC_SR_RB_EDGE);
+ }
+}
+
+static int nfc_sram_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offset, int data_len, const uint8_t *buf,
+ int oob_required, int page, int cached, int raw)
+{
+ int cfg, len;
+ int status = 0;
+ struct atmel_nand_host *host = chip->priv;
+ void *sram = host->nfc->sram_bank0 + nfc_get_sram_off(host);
+
+ /* Subpage write is not supported */
+ if (offset || (data_len < mtd->writesize))
+ return -EINVAL;
+
+ len = mtd->writesize;
+ /* Copy page data to sram that will write to nand via NFC */
+ if (use_dma) {
+ if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) != 0)
+ /* Fall back to use cpu copy */
+ memcpy(sram, buf, len);
+ } else {
+ memcpy(sram, buf, len);
+ }
+
+ cfg = nfc_readl(host->nfc->hsmc_regs, CFG);
+ if (unlikely(raw) && oob_required) {
+ memcpy(sram + len, chip->oob_poi, mtd->oobsize);
+ len += mtd->oobsize;
+ nfc_writel(host->nfc->hsmc_regs, CFG, cfg | NFC_CFG_WSPARE);
+ } else {
+ nfc_writel(host->nfc->hsmc_regs, CFG, cfg & ~NFC_CFG_WSPARE);
+ }
+
+ if (chip->ecc.mode == NAND_ECC_HW && host->has_pmecc)
+ /*
+ * When use NFC sram, need set up PMECC before send
+ * NAND_CMD_SEQIN command. Since when the nand command
+ * is sent, nfc will do transfer from sram and nand.
+ */
+ pmecc_enable(host, NAND_ECC_WRITE);
+
+ host->nfc->will_write_sram = true;
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ host->nfc->will_write_sram = false;
+
+ if (likely(!raw))
+ /* Need to write ecc into oob */
+ status = chip->ecc.write_page(mtd, chip, buf, oob_required,
+ page);
+
+ if (status < 0)
+ return status;
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+ status = chip->errstat(mtd, chip, FL_WRITING, status, page);
+
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+
+ return 0;
+}
+
+static int nfc_sram_init(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct atmel_nand_host *host = chip->priv;
+ int res = 0;
+
+ /* Initialize the NFC CFG register */
+ unsigned int cfg_nfc = 0;
+
+ /* set page size and oob layout */
+ switch (mtd->writesize) {
+ case 512:
+ cfg_nfc = NFC_CFG_PAGESIZE_512;
+ break;
+ case 1024:
+ cfg_nfc = NFC_CFG_PAGESIZE_1024;
+ break;
+ case 2048:
+ cfg_nfc = NFC_CFG_PAGESIZE_2048;
+ break;
+ case 4096:
+ cfg_nfc = NFC_CFG_PAGESIZE_4096;
+ break;
+ case 8192:
+ cfg_nfc = NFC_CFG_PAGESIZE_8192;
+ break;
+ default:
+ dev_err(host->dev, "Unsupported page size for NFC.\n");
+ res = -ENXIO;
+ return res;
+ }
+
+ /* oob bytes size = (NFCSPARESIZE + 1) * 4
+ * Max support spare size is 512 bytes. */
+ cfg_nfc |= (((mtd->oobsize / 4) - 1) << NFC_CFG_NFC_SPARESIZE_BIT_POS
+ & NFC_CFG_NFC_SPARESIZE);
+ /* default set a max timeout */
+ cfg_nfc |= NFC_CFG_RSPARE |
+ NFC_CFG_NFC_DTOCYC | NFC_CFG_NFC_DTOMUL;
+
+ nfc_writel(host->nfc->hsmc_regs, CFG, cfg_nfc);
+
+ host->nfc->will_write_sram = false;
+ nfc_set_sram_bank(host, 0);
+
+ /* Use Write page with NFC SRAM only for PMECC or ECC NONE. */
+ if (host->nfc->write_by_sram) {
+ if ((chip->ecc.mode == NAND_ECC_HW && host->has_pmecc) ||
+ chip->ecc.mode == NAND_ECC_NONE)
+ chip->write_page = nfc_sram_write_page;
+ else
+ host->nfc->write_by_sram = false;
+ }
+
+ dev_info(host->dev, "Using NFC Sram read %s\n",
+ host->nfc->write_by_sram ? "and write" : "");
+ return 0;
+}
+
+static struct platform_driver atmel_nand_nfc_driver;
+/*
+ * Probe for the NAND device.
+ */
+static int atmel_nand_probe(struct platform_device *pdev)
+{
+ struct atmel_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand_chip;
+ struct resource *mem;
+ struct mtd_part_parser_data ppdata = {};
+ int res, irq;
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ res = platform_driver_register(&atmel_nand_nfc_driver);
+ if (res)
+ dev_err(&pdev->dev, "atmel_nand: can't register NFC driver\n");
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->io_base = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(host->io_base)) {
+ res = PTR_ERR(host->io_base);
+ goto err_nand_ioremap;
+ }
+ host->io_phys = (dma_addr_t)mem->start;
+
+ mtd = &host->mtd;
+ nand_chip = &host->nand_chip;
+ host->dev = &pdev->dev;
+ if (IS_ENABLED(CONFIG_OF) && pdev->dev.of_node) {
+ /* Only when CONFIG_OF is enabled of_node can be parsed */
+ res = atmel_of_init_port(host, pdev->dev.of_node);
+ if (res)
+ goto err_nand_ioremap;
+ } else {
+ memcpy(&host->board, dev_get_platdata(&pdev->dev),
+ sizeof(struct atmel_nand_data));
+ }
+
+ nand_chip->priv = host; /* link the private data structures */
+ mtd->priv = nand_chip;
+ mtd->dev.parent = &pdev->dev;
+
+ /* Set address of NAND IO lines */
+ nand_chip->IO_ADDR_R = host->io_base;
+ nand_chip->IO_ADDR_W = host->io_base;
+
+ if (nand_nfc.is_initialized) {
+ /* NFC driver is probed and initialized */
+ host->nfc = &nand_nfc;
+
+ nand_chip->select_chip = nfc_select_chip;
+ nand_chip->dev_ready = nfc_device_ready;
+ nand_chip->cmdfunc = nfc_nand_command;
+
+ /* Initialize the interrupt for NFC */
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(host->dev, "Cannot get HSMC irq!\n");
+ res = irq;
+ goto err_nand_ioremap;
+ }
+
+ res = devm_request_irq(&pdev->dev, irq, hsmc_interrupt,
+ 0, "hsmc", host);
+ if (res) {
+ dev_err(&pdev->dev, "Unable to request HSMC irq %d\n",
+ irq);
+ goto err_nand_ioremap;
+ }
+ } else {
+ res = atmel_nand_set_enable_ready_pins(mtd);
+ if (res)
+ goto err_nand_ioremap;
+
+ nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl;
+ }
+
+ nand_chip->ecc.mode = host->board.ecc_mode;
+ nand_chip->chip_delay = 40; /* 40us command delay time */
+
+ if (host->board.bus_width_16) /* 16-bit bus width */
+ nand_chip->options |= NAND_BUSWIDTH_16;
+
+ nand_chip->read_buf = atmel_read_buf;
+ nand_chip->write_buf = atmel_write_buf;
+
+ platform_set_drvdata(pdev, host);
+ atmel_nand_enable(host);
+
+ if (gpio_is_valid(host->board.det_pin)) {
+ res = devm_gpio_request(&pdev->dev,
+ host->board.det_pin, "nand_det");
+ if (res < 0) {
+ dev_err(&pdev->dev,
+ "can't request det gpio %d\n",
+ host->board.det_pin);
+ goto err_no_card;
+ }
+
+ res = gpio_direction_input(host->board.det_pin);
+ if (res < 0) {
+ dev_err(&pdev->dev,
+ "can't request input direction det gpio %d\n",
+ host->board.det_pin);
+ goto err_no_card;
+ }
+
+ if (gpio_get_value(host->board.det_pin)) {
+ dev_info(&pdev->dev, "No SmartMedia card inserted.\n");
+ res = -ENXIO;
+ goto err_no_card;
+ }
+ }
+
+ if (host->board.on_flash_bbt || on_flash_bbt) {
+ dev_info(&pdev->dev, "Use On Flash BBT\n");
+ nand_chip->bbt_options |= NAND_BBT_USE_FLASH;
+ }
+
+ if (!host->board.has_dma)
+ use_dma = 0;
+
+ if (use_dma) {
+ dma_cap_mask_t mask;
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+ host->dma_chan = dma_request_channel(mask, NULL, NULL);
+ if (!host->dma_chan) {
+ dev_err(host->dev, "Failed to request DMA channel\n");
+ use_dma = 0;
+ }
+ }
+ if (use_dma)
+ dev_info(host->dev, "Using %s for DMA transfers.\n",
+ dma_chan_name(host->dma_chan));
+ else
+ dev_info(host->dev, "No DMA support for NAND access.\n");
+
+ /* first scan to find the device and get the page size */
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ res = -ENXIO;
+ goto err_scan_ident;
+ }
+
+ if (nand_chip->ecc.mode == NAND_ECC_HW) {
+ if (host->has_pmecc)
+ res = atmel_pmecc_nand_init_params(pdev, host);
+ else
+ res = atmel_hw_nand_init_params(pdev, host);
+
+ if (res != 0)
+ goto err_hw_ecc;
+ }
+
+ /* initialize the nfc configuration register */
+ if (host->nfc && host->nfc->use_nfc_sram) {
+ res = nfc_sram_init(mtd);
+ if (res) {
+ host->nfc->use_nfc_sram = false;
+ dev_err(host->dev, "Disable use nfc sram for data transfer.\n");
+ }
+ }
+
+ /* second phase scan */
+ if (nand_scan_tail(mtd)) {
+ res = -ENXIO;
+ goto err_scan_tail;
+ }
+
+ mtd->name = "atmel_nand";
+ ppdata.of_node = pdev->dev.of_node;
+ res = mtd_device_parse_register(mtd, NULL, &ppdata,
+ host->board.parts, host->board.num_parts);
+ if (!res)
+ return res;
+
+err_scan_tail:
+ if (host->has_pmecc && host->nand_chip.ecc.mode == NAND_ECC_HW)
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+err_hw_ecc:
+err_scan_ident:
+err_no_card:
+ atmel_nand_disable(host);
+ if (host->dma_chan)
+ dma_release_channel(host->dma_chan);
+err_nand_ioremap:
+ return res;
+}
+
+/*
+ * Remove a NAND device.
+ */
+static int atmel_nand_remove(struct platform_device *pdev)
+{
+ struct atmel_nand_host *host = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = &host->mtd;
+
+ nand_release(mtd);
+
+ atmel_nand_disable(host);
+
+ if (host->has_pmecc && host->nand_chip.ecc.mode == NAND_ECC_HW) {
+ pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE);
+ pmerrloc_writel(host->pmerrloc_base, ELDIS,
+ PMERRLOC_DISABLE);
+ }
+
+ if (host->dma_chan)
+ dma_release_channel(host->dma_chan);
+
+ platform_driver_unregister(&atmel_nand_nfc_driver);
+
+ return 0;
+}
+
+static struct atmel_nand_caps at91rm9200_caps = {
+ .pmecc_correct_erase_page = false,
+};
+
+static struct atmel_nand_caps sama5d4_caps = {
+ .pmecc_correct_erase_page = true,
+};
+
+static const struct of_device_id atmel_nand_dt_ids[] = {
+ { .compatible = "atmel,at91rm9200-nand", .data = &at91rm9200_caps },
+ { .compatible = "atmel,sama5d4-nand", .data = &sama5d4_caps },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(of, atmel_nand_dt_ids);
+
+static int atmel_nand_nfc_probe(struct platform_device *pdev)
+{
+ struct atmel_nfc *nfc = &nand_nfc;
+ struct resource *nfc_cmd_regs, *nfc_hsmc_regs, *nfc_sram;
+ int ret;
+
+ nfc_cmd_regs = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ nfc->base_cmd_regs = devm_ioremap_resource(&pdev->dev, nfc_cmd_regs);
+ if (IS_ERR(nfc->base_cmd_regs))
+ return PTR_ERR(nfc->base_cmd_regs);
+
+ nfc_hsmc_regs = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ nfc->hsmc_regs = devm_ioremap_resource(&pdev->dev, nfc_hsmc_regs);
+ if (IS_ERR(nfc->hsmc_regs))
+ return PTR_ERR(nfc->hsmc_regs);
+
+ nfc_sram = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ if (nfc_sram) {
+ nfc->sram_bank0 = (void * __force)
+ devm_ioremap_resource(&pdev->dev, nfc_sram);
+ if (IS_ERR(nfc->sram_bank0)) {
+ dev_warn(&pdev->dev, "Fail to ioremap the NFC sram with error: %ld. So disable NFC sram.\n",
+ PTR_ERR(nfc->sram_bank0));
+ } else {
+ nfc->use_nfc_sram = true;
+ nfc->sram_bank0_phys = (dma_addr_t)nfc_sram->start;
+
+ if (pdev->dev.of_node)
+ nfc->write_by_sram = of_property_read_bool(
+ pdev->dev.of_node,
+ "atmel,write-by-sram");
+ }
+ }
+
+ nfc_writel(nfc->hsmc_regs, IDR, 0xffffffff);
+ nfc_readl(nfc->hsmc_regs, SR); /* clear the NFC_SR */
+
+ nfc->clk = devm_clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(nfc->clk)) {
+ ret = clk_prepare_enable(nfc->clk);
+ if (ret)
+ return ret;
+ } else {
+ dev_warn(&pdev->dev, "NFC clock missing, update your Device Tree");
+ }
+
+ nfc->is_initialized = true;
+ dev_info(&pdev->dev, "NFC is probed.\n");
+
+ return 0;
+}
+
+static int atmel_nand_nfc_remove(struct platform_device *pdev)
+{
+ struct atmel_nfc *nfc = &nand_nfc;
+
+ if (!IS_ERR(nfc->clk))
+ clk_disable_unprepare(nfc->clk);
+
+ return 0;
+}
+
+static const struct of_device_id atmel_nand_nfc_match[] = {
+ { .compatible = "atmel,sama5d3-nfc" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_nand_nfc_match);
+
+static struct platform_driver atmel_nand_nfc_driver = {
+ .driver = {
+ .name = "atmel_nand_nfc",
+ .of_match_table = of_match_ptr(atmel_nand_nfc_match),
+ },
+ .probe = atmel_nand_nfc_probe,
+ .remove = atmel_nand_nfc_remove,
+};
+
+static struct platform_driver atmel_nand_driver = {
+ .probe = atmel_nand_probe,
+ .remove = atmel_nand_remove,
+ .driver = {
+ .name = "atmel_nand",
+ .of_match_table = of_match_ptr(atmel_nand_dt_ids),
+ },
+};
+
+module_platform_driver(atmel_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Rick Bronson");
+MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91 / AVR32");
+MODULE_ALIAS("platform:atmel_nand");
diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h
new file mode 100644
index 0000000..668e735
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_ecc.h
@@ -0,0 +1,158 @@
+/*
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 - 2012 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_ECC_H
+#define ATMEL_NAND_ECC_H
+
+#define ATMEL_ECC_CR 0x00 /* Control register */
+#define ATMEL_ECC_RST (1 << 0) /* Reset parity */
+
+#define ATMEL_ECC_MR 0x04 /* Mode register */
+#define ATMEL_ECC_PAGESIZE (3 << 0) /* Page Size */
+#define ATMEL_ECC_PAGESIZE_528 (0)
+#define ATMEL_ECC_PAGESIZE_1056 (1)
+#define ATMEL_ECC_PAGESIZE_2112 (2)
+#define ATMEL_ECC_PAGESIZE_4224 (3)
+
+#define ATMEL_ECC_SR 0x08 /* Status register */
+#define ATMEL_ECC_RECERR (1 << 0) /* Recoverable Error */
+#define ATMEL_ECC_ECCERR (1 << 1) /* ECC Single Bit Error */
+#define ATMEL_ECC_MULERR (1 << 2) /* Multiple Errors */
+
+#define ATMEL_ECC_PR 0x0c /* Parity register */
+#define ATMEL_ECC_BITADDR (0xf << 0) /* Bit Error Address */
+#define ATMEL_ECC_WORDADDR (0xfff << 4) /* Word Error Address */
+
+#define ATMEL_ECC_NPR 0x10 /* NParity register */
+#define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */
+
+/* PMECC Register Definitions */
+#define ATMEL_PMECC_CFG 0x000 /* Configuration Register */
+#define PMECC_CFG_BCH_ERR2 (0 << 0)
+#define PMECC_CFG_BCH_ERR4 (1 << 0)
+#define PMECC_CFG_BCH_ERR8 (2 << 0)
+#define PMECC_CFG_BCH_ERR12 (3 << 0)
+#define PMECC_CFG_BCH_ERR24 (4 << 0)
+
+#define PMECC_CFG_SECTOR512 (0 << 4)
+#define PMECC_CFG_SECTOR1024 (1 << 4)
+
+#define PMECC_CFG_PAGE_1SECTOR (0 << 8)
+#define PMECC_CFG_PAGE_2SECTORS (1 << 8)
+#define PMECC_CFG_PAGE_4SECTORS (2 << 8)
+#define PMECC_CFG_PAGE_8SECTORS (3 << 8)
+
+#define PMECC_CFG_READ_OP (0 << 12)
+#define PMECC_CFG_WRITE_OP (1 << 12)
+
+#define PMECC_CFG_SPARE_ENABLE (1 << 16)
+#define PMECC_CFG_SPARE_DISABLE (0 << 16)
+
+#define PMECC_CFG_AUTO_ENABLE (1 << 20)
+#define PMECC_CFG_AUTO_DISABLE (0 << 20)
+
+#define ATMEL_PMECC_SAREA 0x004 /* Spare area size */
+#define ATMEL_PMECC_SADDR 0x008 /* PMECC starting address */
+#define ATMEL_PMECC_EADDR 0x00c /* PMECC ending address */
+#define ATMEL_PMECC_CLK 0x010 /* PMECC clock control */
+#define PMECC_CLK_133MHZ (2 << 0)
+
+#define ATMEL_PMECC_CTRL 0x014 /* PMECC control register */
+#define PMECC_CTRL_RST (1 << 0)
+#define PMECC_CTRL_DATA (1 << 1)
+#define PMECC_CTRL_USER (1 << 2)
+#define PMECC_CTRL_ENABLE (1 << 4)
+#define PMECC_CTRL_DISABLE (1 << 5)
+
+#define ATMEL_PMECC_SR 0x018 /* PMECC status register */
+#define PMECC_SR_BUSY (1 << 0)
+#define PMECC_SR_ENABLE (1 << 4)
+
+#define ATMEL_PMECC_IER 0x01c /* PMECC interrupt enable */
+#define PMECC_IER_ENABLE (1 << 0)
+#define ATMEL_PMECC_IDR 0x020 /* PMECC interrupt disable */
+#define PMECC_IER_DISABLE (1 << 0)
+#define ATMEL_PMECC_IMR 0x024 /* PMECC interrupt mask */
+#define PMECC_IER_MASK (1 << 0)
+#define ATMEL_PMECC_ISR 0x028 /* PMECC interrupt status */
+#define ATMEL_PMECC_ECCx 0x040 /* PMECC ECC x */
+#define ATMEL_PMECC_REMx 0x240 /* PMECC REM x */
+
+/* PMERRLOC Register Definitions */
+#define ATMEL_PMERRLOC_ELCFG 0x000 /* Error location config */
+#define PMERRLOC_ELCFG_SECTOR_512 (0 << 0)
+#define PMERRLOC_ELCFG_SECTOR_1024 (1 << 0)
+#define PMERRLOC_ELCFG_NUM_ERRORS(n) ((n) << 16)
+
+#define ATMEL_PMERRLOC_ELPRIM 0x004 /* Error location primitive */
+#define ATMEL_PMERRLOC_ELEN 0x008 /* Error location enable */
+#define ATMEL_PMERRLOC_ELDIS 0x00c /* Error location disable */
+#define PMERRLOC_DISABLE (1 << 0)
+
+#define ATMEL_PMERRLOC_ELSR 0x010 /* Error location status */
+#define PMERRLOC_ELSR_BUSY (1 << 0)
+#define ATMEL_PMERRLOC_ELIER 0x014 /* Error location int enable */
+#define ATMEL_PMERRLOC_ELIDR 0x018 /* Error location int disable */
+#define ATMEL_PMERRLOC_ELIMR 0x01c /* Error location int mask */
+#define ATMEL_PMERRLOC_ELISR 0x020 /* Error location int status */
+#define PMERRLOC_ERR_NUM_MASK (0x1f << 8)
+#define PMERRLOC_CALC_DONE (1 << 0)
+#define ATMEL_PMERRLOC_SIGMAx 0x028 /* Error location SIGMA x */
+#define ATMEL_PMERRLOC_ELx 0x08c /* Error location x */
+
+/* Register access macros for PMECC */
+#define pmecc_readl_relaxed(addr, reg) \
+ readl_relaxed((addr) + ATMEL_PMECC_##reg)
+
+#define pmecc_writel(addr, reg, value) \
+ writel((value), (addr) + ATMEL_PMECC_##reg)
+
+#define pmecc_readb_ecc_relaxed(addr, sector, n) \
+ readb_relaxed((addr) + ATMEL_PMECC_ECCx + ((sector) * 0x40) + (n))
+
+#define pmecc_readl_rem_relaxed(addr, sector, n) \
+ readl_relaxed((addr) + ATMEL_PMECC_REMx + ((sector) * 0x40) + ((n) * 4))
+
+#define pmerrloc_readl_relaxed(addr, reg) \
+ readl_relaxed((addr) + ATMEL_PMERRLOC_##reg)
+
+#define pmerrloc_writel(addr, reg, value) \
+ writel((value), (addr) + ATMEL_PMERRLOC_##reg)
+
+#define pmerrloc_writel_sigma_relaxed(addr, n, value) \
+ writel_relaxed((value), (addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4))
+
+#define pmerrloc_readl_sigma_relaxed(addr, n) \
+ readl_relaxed((addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4))
+
+#define pmerrloc_readl_el_relaxed(addr, n) \
+ readl_relaxed((addr) + ATMEL_PMERRLOC_ELx + ((n) * 4))
+
+/* Galois field dimension */
+#define PMECC_GF_DIMENSION_13 13
+#define PMECC_GF_DIMENSION_14 14
+
+/* Primitive Polynomial used by PMECC */
+#define PMECC_GF_13_PRIMITIVE_POLY 0x201b
+#define PMECC_GF_14_PRIMITIVE_POLY 0x4443
+
+#define PMECC_LOOKUP_TABLE_SIZE_512 0x2000
+#define PMECC_LOOKUP_TABLE_SIZE_1024 0x4000
+
+/* Time out value for reading PMECC status register */
+#define PMECC_MAX_TIMEOUT_MS 100
+
+/* Reserved bytes in oob area */
+#define PMECC_OOB_RESERVED_BYTES 2
+
+#endif
diff --git a/drivers/mtd/nand/atmel_nand_nfc.h b/drivers/mtd/nand/atmel_nand_nfc.h
new file mode 100644
index 0000000..4d5d262
--- /dev/null
+++ b/drivers/mtd/nand/atmel_nand_nfc.h
@@ -0,0 +1,103 @@
+/*
+ * Atmel Nand Flash Controller (NFC) - System peripherals regsters.
+ * Based on SAMA5D3 datasheet.
+ *
+ * © Copyright 2013 Atmel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef ATMEL_NAND_NFC_H
+#define ATMEL_NAND_NFC_H
+
+/*
+ * HSMC NFC registers
+ */
+#define ATMEL_HSMC_NFC_CFG 0x00 /* NFC Configuration Register */
+#define NFC_CFG_PAGESIZE (7 << 0)
+#define NFC_CFG_PAGESIZE_512 (0 << 0)
+#define NFC_CFG_PAGESIZE_1024 (1 << 0)
+#define NFC_CFG_PAGESIZE_2048 (2 << 0)
+#define NFC_CFG_PAGESIZE_4096 (3 << 0)
+#define NFC_CFG_PAGESIZE_8192 (4 << 0)
+#define NFC_CFG_WSPARE (1 << 8)
+#define NFC_CFG_RSPARE (1 << 9)
+#define NFC_CFG_NFC_DTOCYC (0xf << 16)
+#define NFC_CFG_NFC_DTOMUL (0x7 << 20)
+#define NFC_CFG_NFC_SPARESIZE (0x7f << 24)
+#define NFC_CFG_NFC_SPARESIZE_BIT_POS 24
+
+#define ATMEL_HSMC_NFC_CTRL 0x04 /* NFC Control Register */
+#define NFC_CTRL_ENABLE (1 << 0)
+#define NFC_CTRL_DISABLE (1 << 1)
+
+#define ATMEL_HSMC_NFC_SR 0x08 /* NFC Status Register */
+#define NFC_SR_BUSY (1 << 8)
+#define NFC_SR_XFR_DONE (1 << 16)
+#define NFC_SR_CMD_DONE (1 << 17)
+#define NFC_SR_DTOE (1 << 20)
+#define NFC_SR_UNDEF (1 << 21)
+#define NFC_SR_AWB (1 << 22)
+#define NFC_SR_ASE (1 << 23)
+#define NFC_SR_RB_EDGE (1 << 24)
+
+#define ATMEL_HSMC_NFC_IER 0x0c
+#define ATMEL_HSMC_NFC_IDR 0x10
+#define ATMEL_HSMC_NFC_IMR 0x14
+#define ATMEL_HSMC_NFC_CYCLE0 0x18 /* NFC Address Cycle Zero */
+#define ATMEL_HSMC_NFC_ADDR_CYCLE0 (0xff)
+
+#define ATMEL_HSMC_NFC_BANK 0x1c /* NFC Bank Register */
+#define ATMEL_HSMC_NFC_BANK0 (0 << 0)
+#define ATMEL_HSMC_NFC_BANK1 (1 << 0)
+
+#define nfc_writel(addr, reg, value) \
+ writel((value), (addr) + ATMEL_HSMC_NFC_##reg)
+
+#define nfc_readl(addr, reg) \
+ readl_relaxed((addr) + ATMEL_HSMC_NFC_##reg)
+
+/*
+ * NFC Address Command definitions
+ */
+#define NFCADDR_CMD_CMD1 (0xff << 2) /* Command for Cycle 1 */
+#define NFCADDR_CMD_CMD1_BIT_POS 2
+#define NFCADDR_CMD_CMD2 (0xff << 10) /* Command for Cycle 2 */
+#define NFCADDR_CMD_CMD2_BIT_POS 10
+#define NFCADDR_CMD_VCMD2 (0x1 << 18) /* Valid Cycle 2 Command */
+#define NFCADDR_CMD_ACYCLE (0x7 << 19) /* Number of Address required */
+#define NFCADDR_CMD_ACYCLE_NONE (0x0 << 19)
+#define NFCADDR_CMD_ACYCLE_1 (0x1 << 19)
+#define NFCADDR_CMD_ACYCLE_2 (0x2 << 19)
+#define NFCADDR_CMD_ACYCLE_3 (0x3 << 19)
+#define NFCADDR_CMD_ACYCLE_4 (0x4 << 19)
+#define NFCADDR_CMD_ACYCLE_5 (0x5 << 19)
+#define NFCADDR_CMD_ACYCLE_BIT_POS 19
+#define NFCADDR_CMD_CSID (0x7 << 22) /* Chip Select Identifier */
+#define NFCADDR_CMD_CSID_0 (0x0 << 22)
+#define NFCADDR_CMD_CSID_1 (0x1 << 22)
+#define NFCADDR_CMD_CSID_2 (0x2 << 22)
+#define NFCADDR_CMD_CSID_3 (0x3 << 22)
+#define NFCADDR_CMD_CSID_4 (0x4 << 22)
+#define NFCADDR_CMD_CSID_5 (0x5 << 22)
+#define NFCADDR_CMD_CSID_6 (0x6 << 22)
+#define NFCADDR_CMD_CSID_7 (0x7 << 22)
+#define NFCADDR_CMD_DATAEN (0x1 << 25) /* Data Transfer Enable */
+#define NFCADDR_CMD_DATADIS (0x0 << 25) /* Data Transfer Disable */
+#define NFCADDR_CMD_NFCRD (0x0 << 26) /* NFC Read Enable */
+#define NFCADDR_CMD_NFCWR (0x1 << 26) /* NFC Write Enable */
+#define NFCADDR_CMD_NFCBUSY (0x1 << 27) /* NFC Busy */
+
+#define nfc_cmd_addr1234_writel(cmd, addr1234, nfc_base) \
+ writel((addr1234), (cmd) + nfc_base)
+
+#define nfc_cmd_readl(bitstatus, nfc_base) \
+ readl_relaxed((bitstatus) + nfc_base)
+
+#define NFC_TIME_OUT_MS 100
+#define NFC_SRAM_BANK1_OFFSET 0x1200
+
+#endif
diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c
new file mode 100644
index 0000000..08a130f
--- /dev/null
+++ b/drivers/mtd/nand/au1550nd.c
@@ -0,0 +1,515 @@
+/*
+ * drivers/mtd/nand/au1550nd.c
+ *
+ * Copyright (C) 2004 Embedded Edge, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/platform_device.h>
+#include <asm/io.h>
+#include <asm/mach-au1x00/au1000.h>
+#include <asm/mach-au1x00/au1550nd.h>
+
+
+struct au1550nd_ctx {
+ struct mtd_info info;
+ struct nand_chip chip;
+
+ int cs;
+ void __iomem *base;
+ void (*write_byte)(struct mtd_info *, u_char);
+};
+
+/**
+ * au_read_byte - read one byte from the chip
+ * @mtd: MTD device structure
+ *
+ * read function for 8bit buswidth
+ */
+static u_char au_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ u_char ret = readb(this->IO_ADDR_R);
+ wmb(); /* drain writebuffer */
+ return ret;
+}
+
+/**
+ * au_write_byte - write one byte to the chip
+ * @mtd: MTD device structure
+ * @byte: pointer to data byte to write
+ *
+ * write function for 8it buswidth
+ */
+static void au_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *this = mtd->priv;
+ writeb(byte, this->IO_ADDR_W);
+ wmb(); /* drain writebuffer */
+}
+
+/**
+ * au_read_byte16 - read one byte endianness aware from the chip
+ * @mtd: MTD device structure
+ *
+ * read function for 16bit buswidth with endianness conversion
+ */
+static u_char au_read_byte16(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ u_char ret = (u_char) cpu_to_le16(readw(this->IO_ADDR_R));
+ wmb(); /* drain writebuffer */
+ return ret;
+}
+
+/**
+ * au_write_byte16 - write one byte endianness aware to the chip
+ * @mtd: MTD device structure
+ * @byte: pointer to data byte to write
+ *
+ * write function for 16bit buswidth with endianness conversion
+ */
+static void au_write_byte16(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *this = mtd->priv;
+ writew(le16_to_cpu((u16) byte), this->IO_ADDR_W);
+ wmb(); /* drain writebuffer */
+}
+
+/**
+ * au_read_word - read one word from the chip
+ * @mtd: MTD device structure
+ *
+ * read function for 16bit buswidth without endianness conversion
+ */
+static u16 au_read_word(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ u16 ret = readw(this->IO_ADDR_R);
+ wmb(); /* drain writebuffer */
+ return ret;
+}
+
+/**
+ * au_write_buf - write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ *
+ * write function for 8bit buswidth
+ */
+static void au_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+
+ for (i = 0; i < len; i++) {
+ writeb(buf[i], this->IO_ADDR_W);
+ wmb(); /* drain writebuffer */
+ }
+}
+
+/**
+ * au_read_buf - read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ *
+ * read function for 8bit buswidth
+ */
+static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+
+ for (i = 0; i < len; i++) {
+ buf[i] = readb(this->IO_ADDR_R);
+ wmb(); /* drain writebuffer */
+ }
+}
+
+/**
+ * au_write_buf16 - write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ *
+ * write function for 16bit buswidth
+ */
+static void au_write_buf16(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+ u16 *p = (u16 *) buf;
+ len >>= 1;
+
+ for (i = 0; i < len; i++) {
+ writew(p[i], this->IO_ADDR_W);
+ wmb(); /* drain writebuffer */
+ }
+
+}
+
+/**
+ * au_read_buf16 - read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ *
+ * read function for 16bit buswidth
+ */
+static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+ u16 *p = (u16 *) buf;
+ len >>= 1;
+
+ for (i = 0; i < len; i++) {
+ p[i] = readw(this->IO_ADDR_R);
+ wmb(); /* drain writebuffer */
+ }
+}
+
+/* Select the chip by setting nCE to low */
+#define NAND_CTL_SETNCE 1
+/* Deselect the chip by setting nCE to high */
+#define NAND_CTL_CLRNCE 2
+/* Select the command latch by setting CLE to high */
+#define NAND_CTL_SETCLE 3
+/* Deselect the command latch by setting CLE to low */
+#define NAND_CTL_CLRCLE 4
+/* Select the address latch by setting ALE to high */
+#define NAND_CTL_SETALE 5
+/* Deselect the address latch by setting ALE to low */
+#define NAND_CTL_CLRALE 6
+
+static void au1550_hwcontrol(struct mtd_info *mtd, int cmd)
+{
+ struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info);
+ struct nand_chip *this = mtd->priv;
+
+ switch (cmd) {
+
+ case NAND_CTL_SETCLE:
+ this->IO_ADDR_W = ctx->base + MEM_STNAND_CMD;
+ break;
+
+ case NAND_CTL_CLRCLE:
+ this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA;
+ break;
+
+ case NAND_CTL_SETALE:
+ this->IO_ADDR_W = ctx->base + MEM_STNAND_ADDR;
+ break;
+
+ case NAND_CTL_CLRALE:
+ this->IO_ADDR_W = ctx->base + MEM_STNAND_DATA;
+ /* FIXME: Nobody knows why this is necessary,
+ * but it works only that way */
+ udelay(1);
+ break;
+
+ case NAND_CTL_SETNCE:
+ /* assert (force assert) chip enable */
+ alchemy_wrsmem((1 << (4 + ctx->cs)), AU1000_MEM_STNDCTL);
+ break;
+
+ case NAND_CTL_CLRNCE:
+ /* deassert chip enable */
+ alchemy_wrsmem(0, AU1000_MEM_STNDCTL);
+ break;
+ }
+
+ this->IO_ADDR_R = this->IO_ADDR_W;
+
+ wmb(); /* Drain the writebuffer */
+}
+
+int au1550_device_ready(struct mtd_info *mtd)
+{
+ return (alchemy_rdsmem(AU1000_MEM_STSTAT) & 0x1) ? 1 : 0;
+}
+
+/**
+ * au1550_select_chip - control -CE line
+ * Forbid driving -CE manually permitting the NAND controller to do this.
+ * Keeping -CE asserted during the whole sector reads interferes with the
+ * NOR flash and PCMCIA drivers as it causes contention on the static bus.
+ * We only have to hold -CE low for the NAND read commands since the flash
+ * chip needs it to be asserted during chip not ready time but the NAND
+ * controller keeps it released.
+ *
+ * @mtd: MTD device structure
+ * @chip: chipnumber to select, -1 for deselect
+ */
+static void au1550_select_chip(struct mtd_info *mtd, int chip)
+{
+}
+
+/**
+ * au1550_command - Send command to NAND device
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
+ */
+static void au1550_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+ struct au1550nd_ctx *ctx = container_of(mtd, struct au1550nd_ctx, info);
+ struct nand_chip *this = mtd->priv;
+ int ce_override = 0, i;
+ unsigned long flags = 0;
+
+ /* Begin command latch cycle */
+ au1550_hwcontrol(mtd, NAND_CTL_SETCLE);
+ /*
+ * Write out the command to the device.
+ */
+ if (command == NAND_CMD_SEQIN) {
+ int readcmd;
+
+ if (column >= mtd->writesize) {
+ /* OOB area */
+ column -= mtd->writesize;
+ readcmd = NAND_CMD_READOOB;
+ } else if (column < 256) {
+ /* First 256 bytes --> READ0 */
+ readcmd = NAND_CMD_READ0;
+ } else {
+ column -= 256;
+ readcmd = NAND_CMD_READ1;
+ }
+ ctx->write_byte(mtd, readcmd);
+ }
+ ctx->write_byte(mtd, command);
+
+ /* Set ALE and clear CLE to start address cycle */
+ au1550_hwcontrol(mtd, NAND_CTL_CLRCLE);
+
+ if (column != -1 || page_addr != -1) {
+ au1550_hwcontrol(mtd, NAND_CTL_SETALE);
+
+ /* Serially input address */
+ if (column != -1) {
+ /* Adjust columns for 16 bit buswidth */
+ if (this->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
+ column >>= 1;
+ ctx->write_byte(mtd, column);
+ }
+ if (page_addr != -1) {
+ ctx->write_byte(mtd, (u8)(page_addr & 0xff));
+
+ if (command == NAND_CMD_READ0 ||
+ command == NAND_CMD_READ1 ||
+ command == NAND_CMD_READOOB) {
+ /*
+ * NAND controller will release -CE after
+ * the last address byte is written, so we'll
+ * have to forcibly assert it. No interrupts
+ * are allowed while we do this as we don't
+ * want the NOR flash or PCMCIA drivers to
+ * steal our precious bytes of data...
+ */
+ ce_override = 1;
+ local_irq_save(flags);
+ au1550_hwcontrol(mtd, NAND_CTL_SETNCE);
+ }
+
+ ctx->write_byte(mtd, (u8)(page_addr >> 8));
+
+ /* One more address cycle for devices > 32MiB */
+ if (this->chipsize > (32 << 20))
+ ctx->write_byte(mtd,
+ ((page_addr >> 16) & 0x0f));
+ }
+ /* Latch in address */
+ au1550_hwcontrol(mtd, NAND_CTL_CLRALE);
+ }
+
+ /*
+ * Program and erase have their own busy handlers.
+ * Status and sequential in need no delay.
+ */
+ switch (command) {
+
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_STATUS:
+ return;
+
+ case NAND_CMD_RESET:
+ break;
+
+ case NAND_CMD_READ0:
+ case NAND_CMD_READ1:
+ case NAND_CMD_READOOB:
+ /* Check if we're really driving -CE low (just in case) */
+ if (unlikely(!ce_override))
+ break;
+
+ /* Apply a short delay always to ensure that we do wait tWB. */
+ ndelay(100);
+ /* Wait for a chip to become ready... */
+ for (i = this->chip_delay; !this->dev_ready(mtd) && i > 0; --i)
+ udelay(1);
+
+ /* Release -CE and re-enable interrupts. */
+ au1550_hwcontrol(mtd, NAND_CTL_CLRNCE);
+ local_irq_restore(flags);
+ return;
+ }
+ /* Apply this short delay always to ensure that we do wait tWB. */
+ ndelay(100);
+
+ while(!this->dev_ready(mtd));
+}
+
+static int find_nand_cs(unsigned long nand_base)
+{
+ void __iomem *base =
+ (void __iomem *)KSEG1ADDR(AU1000_STATIC_MEM_PHYS_ADDR);
+ unsigned long addr, staddr, start, mask, end;
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ addr = 0x1000 + (i * 0x10); /* CSx */
+ staddr = __raw_readl(base + addr + 0x08); /* STADDRx */
+ /* figure out the decoded range of this CS */
+ start = (staddr << 4) & 0xfffc0000;
+ mask = (staddr << 18) & 0xfffc0000;
+ end = (start | (start - 1)) & ~(start ^ mask);
+ if ((nand_base >= start) && (nand_base < end))
+ return i;
+ }
+
+ return -ENODEV;
+}
+
+static int au1550nd_probe(struct platform_device *pdev)
+{
+ struct au1550nd_platdata *pd;
+ struct au1550nd_ctx *ctx;
+ struct nand_chip *this;
+ struct resource *r;
+ int ret, cs;
+
+ pd = dev_get_platdata(&pdev->dev);
+ if (!pd) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -ENODEV;
+ }
+
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no NAND memory resource\n");
+ ret = -ENODEV;
+ goto out1;
+ }
+ if (request_mem_region(r->start, resource_size(r), "au1550-nand")) {
+ dev_err(&pdev->dev, "cannot claim NAND memory area\n");
+ ret = -ENOMEM;
+ goto out1;
+ }
+
+ ctx->base = ioremap_nocache(r->start, 0x1000);
+ if (!ctx->base) {
+ dev_err(&pdev->dev, "cannot remap NAND memory area\n");
+ ret = -ENODEV;
+ goto out2;
+ }
+
+ this = &ctx->chip;
+ ctx->info.priv = this;
+ ctx->info.dev.parent = &pdev->dev;
+
+ /* figure out which CS# r->start belongs to */
+ cs = find_nand_cs(r->start);
+ if (cs < 0) {
+ dev_err(&pdev->dev, "cannot detect NAND chipselect\n");
+ ret = -ENODEV;
+ goto out3;
+ }
+ ctx->cs = cs;
+
+ this->dev_ready = au1550_device_ready;
+ this->select_chip = au1550_select_chip;
+ this->cmdfunc = au1550_command;
+
+ /* 30 us command delay time */
+ this->chip_delay = 30;
+ this->ecc.mode = NAND_ECC_SOFT;
+
+ if (pd->devwidth)
+ this->options |= NAND_BUSWIDTH_16;
+
+ this->read_byte = (pd->devwidth) ? au_read_byte16 : au_read_byte;
+ ctx->write_byte = (pd->devwidth) ? au_write_byte16 : au_write_byte;
+ this->read_word = au_read_word;
+ this->write_buf = (pd->devwidth) ? au_write_buf16 : au_write_buf;
+ this->read_buf = (pd->devwidth) ? au_read_buf16 : au_read_buf;
+
+ ret = nand_scan(&ctx->info, 1);
+ if (ret) {
+ dev_err(&pdev->dev, "NAND scan failed with %d\n", ret);
+ goto out3;
+ }
+
+ mtd_device_register(&ctx->info, pd->parts, pd->num_parts);
+
+ platform_set_drvdata(pdev, ctx);
+
+ return 0;
+
+out3:
+ iounmap(ctx->base);
+out2:
+ release_mem_region(r->start, resource_size(r));
+out1:
+ kfree(ctx);
+ return ret;
+}
+
+static int au1550nd_remove(struct platform_device *pdev)
+{
+ struct au1550nd_ctx *ctx = platform_get_drvdata(pdev);
+ struct resource *r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ nand_release(&ctx->info);
+ iounmap(ctx->base);
+ release_mem_region(r->start, 0x1000);
+ kfree(ctx);
+ return 0;
+}
+
+static struct platform_driver au1550nd_driver = {
+ .driver = {
+ .name = "au1550-nand",
+ },
+ .probe = au1550nd_probe,
+ .remove = au1550nd_remove,
+};
+
+module_platform_driver(au1550nd_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Embedded Edge, LLC");
+MODULE_DESCRIPTION("Board-specific glue layer for NAND flash on Pb1550 board");
diff --git a/drivers/mtd/nand/bcm47xxnflash/Makefile b/drivers/mtd/nand/bcm47xxnflash/Makefile
new file mode 100644
index 0000000..f05b119
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/Makefile
@@ -0,0 +1,4 @@
+bcm47xxnflash-y += main.o
+bcm47xxnflash-y += ops_bcm4706.o
+
+obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH) += bcm47xxnflash.o
diff --git a/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
new file mode 100644
index 0000000..c005a62
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/bcm47xxnflash.h
@@ -0,0 +1,26 @@
+#ifndef __BCM47XXNFLASH_H
+#define __BCM47XXNFLASH_H
+
+#ifndef pr_fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+#endif
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+
+struct bcm47xxnflash {
+ struct bcma_drv_cc *cc;
+
+ struct nand_chip nand_chip;
+ struct mtd_info mtd;
+
+ unsigned curr_command;
+ int curr_page_addr;
+ int curr_column;
+
+ u8 id_data[8];
+};
+
+int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n);
+
+#endif /* BCM47XXNFLASH */
diff --git a/drivers/mtd/nand/bcm47xxnflash/main.c b/drivers/mtd/nand/bcm47xxnflash/main.c
new file mode 100644
index 0000000..9ba0c0f
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/main.c
@@ -0,0 +1,79 @@
+/*
+ * BCM47XX NAND flash driver
+ *
+ * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "bcm47xxnflash.h"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/platform_device.h>
+#include <linux/bcma/bcma.h>
+
+MODULE_DESCRIPTION("NAND flash driver for BCMA bus");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Rafał Miłecki");
+
+static const char *probes[] = { "bcm47xxpart", NULL };
+
+static int bcm47xxnflash_probe(struct platform_device *pdev)
+{
+ struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev);
+ struct bcm47xxnflash *b47n;
+ int err = 0;
+
+ b47n = devm_kzalloc(&pdev->dev, sizeof(*b47n), GFP_KERNEL);
+ if (!b47n)
+ return -ENOMEM;
+
+ b47n->nand_chip.priv = b47n;
+ b47n->mtd.dev.parent = &pdev->dev;
+ b47n->mtd.priv = &b47n->nand_chip; /* Required */
+ b47n->cc = container_of(nflash, struct bcma_drv_cc, nflash);
+
+ if (b47n->cc->core->bus->chipinfo.id == BCMA_CHIP_ID_BCM4706) {
+ err = bcm47xxnflash_ops_bcm4706_init(b47n);
+ } else {
+ pr_err("Device not supported\n");
+ err = -ENOTSUPP;
+ }
+ if (err) {
+ pr_err("Initialization failed: %d\n", err);
+ return err;
+ }
+
+ err = mtd_device_parse_register(&b47n->mtd, probes, NULL, NULL, 0);
+ if (err) {
+ pr_err("Failed to register MTD device: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static int bcm47xxnflash_remove(struct platform_device *pdev)
+{
+ struct bcma_nflash *nflash = dev_get_platdata(&pdev->dev);
+
+ if (nflash->mtd)
+ mtd_device_unregister(nflash->mtd);
+
+ return 0;
+}
+
+static struct platform_driver bcm47xxnflash_driver = {
+ .probe = bcm47xxnflash_probe,
+ .remove = bcm47xxnflash_remove,
+ .driver = {
+ .name = "bcma_nflash",
+ },
+};
+
+module_platform_driver(bcm47xxnflash_driver);
diff --git a/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
new file mode 100644
index 0000000..592befc
--- /dev/null
+++ b/drivers/mtd/nand/bcm47xxnflash/ops_bcm4706.c
@@ -0,0 +1,454 @@
+/*
+ * BCM47XX NAND flash driver
+ *
+ * Copyright (C) 2012 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include "bcm47xxnflash.h"
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/bcma/bcma.h>
+
+/* Broadcom uses 1'000'000 but it seems to be too many. Tests on WNDR4500 has
+ * shown ~1000 retries as maxiumum. */
+#define NFLASH_READY_RETRIES 10000
+
+#define NFLASH_SECTOR_SIZE 512
+
+#define NCTL_CMD0 0x00010000
+#define NCTL_COL 0x00020000 /* Update column with value from BCMA_CC_NFLASH_COL_ADDR */
+#define NCTL_ROW 0x00040000 /* Update row (page) with value from BCMA_CC_NFLASH_ROW_ADDR */
+#define NCTL_CMD1W 0x00080000
+#define NCTL_READ 0x00100000
+#define NCTL_WRITE 0x00200000
+#define NCTL_SPECADDR 0x01000000
+#define NCTL_READY 0x04000000
+#define NCTL_ERR 0x08000000
+#define NCTL_CSA 0x40000000
+#define NCTL_START 0x80000000
+
+/**************************************************
+ * Various helpers
+ **************************************************/
+
+static inline u8 bcm47xxnflash_ops_bcm4706_ns_to_cycle(u16 ns, u16 clock)
+{
+ return ((ns * 1000 * clock) / 1000000) + 1;
+}
+
+static int bcm47xxnflash_ops_bcm4706_ctl_cmd(struct bcma_drv_cc *cc, u32 code)
+{
+ int i = 0;
+
+ bcma_cc_write32(cc, BCMA_CC_NFLASH_CTL, NCTL_START | code);
+ for (i = 0; i < NFLASH_READY_RETRIES; i++) {
+ if (!(bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) & NCTL_START)) {
+ i = 0;
+ break;
+ }
+ }
+ if (i) {
+ pr_err("NFLASH control command not ready!\n");
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static int bcm47xxnflash_ops_bcm4706_poll(struct bcma_drv_cc *cc)
+{
+ int i;
+
+ for (i = 0; i < NFLASH_READY_RETRIES; i++) {
+ if (bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) & NCTL_READY) {
+ if (bcma_cc_read32(cc, BCMA_CC_NFLASH_CTL) &
+ BCMA_CC_NFLASH_CTL_ERR) {
+ pr_err("Error on polling\n");
+ return -EBUSY;
+ } else {
+ return 0;
+ }
+ }
+ }
+
+ pr_err("Polling timeout!\n");
+ return -EBUSY;
+}
+
+/**************************************************
+ * R/W
+ **************************************************/
+
+static void bcm47xxnflash_ops_bcm4706_read(struct mtd_info *mtd, uint8_t *buf,
+ int len)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+
+ u32 ctlcode;
+ u32 *dest = (u32 *)buf;
+ int i;
+ int toread;
+
+ BUG_ON(b47n->curr_page_addr & ~nand_chip->pagemask);
+ /* Don't validate column using nand_chip->page_shift, it may be bigger
+ * when accessing OOB */
+
+ while (len) {
+ /* We can read maximum of 0x200 bytes at once */
+ toread = min(len, 0x200);
+
+ /* Set page and column */
+ bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_COL_ADDR,
+ b47n->curr_column);
+ bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_ROW_ADDR,
+ b47n->curr_page_addr);
+
+ /* Prepare to read */
+ ctlcode = NCTL_CSA | NCTL_CMD1W | NCTL_ROW | NCTL_COL |
+ NCTL_CMD0;
+ ctlcode |= NAND_CMD_READSTART << 8;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode))
+ return;
+ if (bcm47xxnflash_ops_bcm4706_poll(b47n->cc))
+ return;
+
+ /* Eventually read some data :) */
+ for (i = 0; i < toread; i += 4, dest++) {
+ ctlcode = NCTL_CSA | 0x30000000 | NCTL_READ;
+ if (i == toread - 4) /* Last read goes without that */
+ ctlcode &= ~NCTL_CSA;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc,
+ ctlcode))
+ return;
+ *dest = bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_DATA);
+ }
+
+ b47n->curr_column += toread;
+ len -= toread;
+ }
+}
+
+static void bcm47xxnflash_ops_bcm4706_write(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+ struct bcma_drv_cc *cc = b47n->cc;
+
+ u32 ctlcode;
+ const u32 *data = (u32 *)buf;
+ int i;
+
+ BUG_ON(b47n->curr_page_addr & ~nand_chip->pagemask);
+ /* Don't validate column using nand_chip->page_shift, it may be bigger
+ * when accessing OOB */
+
+ for (i = 0; i < len; i += 4, data++) {
+ bcma_cc_write32(cc, BCMA_CC_NFLASH_DATA, *data);
+
+ ctlcode = NCTL_CSA | 0x30000000 | NCTL_WRITE;
+ if (i == len - 4) /* Last read goes without that */
+ ctlcode &= ~NCTL_CSA;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode)) {
+ pr_err("%s ctl_cmd didn't work!\n", __func__);
+ return;
+ }
+ }
+
+ b47n->curr_column += len;
+}
+
+/**************************************************
+ * NAND chip ops
+ **************************************************/
+
+static void bcm47xxnflash_ops_bcm4706_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+ u32 code = 0;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (cmd & NAND_CTRL_CLE)
+ code = cmd | NCTL_CMD0;
+
+ /* nCS is not needed for reset command */
+ if (cmd != NAND_CMD_RESET)
+ code |= NCTL_CSA;
+
+ bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, code);
+}
+
+/* Default nand_select_chip calls cmd_ctrl, which is not used in BCM4706 */
+static void bcm47xxnflash_ops_bcm4706_select_chip(struct mtd_info *mtd,
+ int chip)
+{
+ return;
+}
+
+static int bcm47xxnflash_ops_bcm4706_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+
+ return !!(bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_CTL) & NCTL_READY);
+}
+
+/*
+ * Default nand_command and nand_command_lp don't match BCM4706 hardware layout.
+ * For example, reading chip id is performed in a non-standard way.
+ * Setting column and page is also handled differently, we use a special
+ * registers of ChipCommon core. Hacking cmd_ctrl to understand and convert
+ * standard commands would be much more complicated.
+ */
+static void bcm47xxnflash_ops_bcm4706_cmdfunc(struct mtd_info *mtd,
+ unsigned command, int column,
+ int page_addr)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+ struct bcma_drv_cc *cc = b47n->cc;
+ u32 ctlcode;
+ int i;
+
+ if (column != -1)
+ b47n->curr_column = column;
+ if (page_addr != -1)
+ b47n->curr_page_addr = page_addr;
+
+ switch (command) {
+ case NAND_CMD_RESET:
+ nand_chip->cmd_ctrl(mtd, command, NAND_CTRL_CLE);
+
+ ndelay(100);
+ nand_wait_ready(mtd);
+ break;
+ case NAND_CMD_READID:
+ ctlcode = NCTL_CSA | 0x01000000 | NCTL_CMD1W | NCTL_CMD0;
+ ctlcode |= NAND_CMD_READID;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc, ctlcode)) {
+ pr_err("READID error\n");
+ break;
+ }
+
+ /*
+ * Reading is specific, last one has to go without NCTL_CSA
+ * bit. We don't know how many reads NAND subsystem is going
+ * to perform, so cache everything.
+ */
+ for (i = 0; i < ARRAY_SIZE(b47n->id_data); i++) {
+ ctlcode = NCTL_CSA | NCTL_READ;
+ if (i == ARRAY_SIZE(b47n->id_data) - 1)
+ ctlcode &= ~NCTL_CSA;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(b47n->cc,
+ ctlcode)) {
+ pr_err("READID error\n");
+ break;
+ }
+ b47n->id_data[i] =
+ bcma_cc_read32(b47n->cc, BCMA_CC_NFLASH_DATA)
+ & 0xFF;
+ }
+
+ break;
+ case NAND_CMD_STATUS:
+ ctlcode = NCTL_CSA | NCTL_CMD0 | NAND_CMD_STATUS;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
+ pr_err("STATUS command error\n");
+ break;
+ case NAND_CMD_READ0:
+ break;
+ case NAND_CMD_READOOB:
+ if (page_addr != -1)
+ b47n->curr_column += mtd->writesize;
+ break;
+ case NAND_CMD_ERASE1:
+ bcma_cc_write32(cc, BCMA_CC_NFLASH_ROW_ADDR,
+ b47n->curr_page_addr);
+ ctlcode = NCTL_ROW | NCTL_CMD1W | NCTL_CMD0 |
+ NAND_CMD_ERASE1 | (NAND_CMD_ERASE2 << 8);
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
+ pr_err("ERASE1 failed\n");
+ break;
+ case NAND_CMD_ERASE2:
+ break;
+ case NAND_CMD_SEQIN:
+ /* Set page and column */
+ bcma_cc_write32(cc, BCMA_CC_NFLASH_COL_ADDR,
+ b47n->curr_column);
+ bcma_cc_write32(cc, BCMA_CC_NFLASH_ROW_ADDR,
+ b47n->curr_page_addr);
+
+ /* Prepare to write */
+ ctlcode = 0x40000000 | NCTL_ROW | NCTL_COL | NCTL_CMD0;
+ ctlcode |= NAND_CMD_SEQIN;
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, ctlcode))
+ pr_err("SEQIN failed\n");
+ break;
+ case NAND_CMD_PAGEPROG:
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, NCTL_CMD0 |
+ NAND_CMD_PAGEPROG))
+ pr_err("PAGEPROG failed\n");
+ if (bcm47xxnflash_ops_bcm4706_poll(cc))
+ pr_err("PAGEPROG not ready\n");
+ break;
+ default:
+ pr_err("Command 0x%X unsupported\n", command);
+ break;
+ }
+ b47n->curr_command = command;
+}
+
+static u8 bcm47xxnflash_ops_bcm4706_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+ struct bcma_drv_cc *cc = b47n->cc;
+ u32 tmp = 0;
+
+ switch (b47n->curr_command) {
+ case NAND_CMD_READID:
+ if (b47n->curr_column >= ARRAY_SIZE(b47n->id_data)) {
+ pr_err("Requested invalid id_data: %d\n",
+ b47n->curr_column);
+ return 0;
+ }
+ return b47n->id_data[b47n->curr_column++];
+ case NAND_CMD_STATUS:
+ if (bcm47xxnflash_ops_bcm4706_ctl_cmd(cc, NCTL_READ))
+ return 0;
+ return bcma_cc_read32(cc, BCMA_CC_NFLASH_DATA) & 0xff;
+ case NAND_CMD_READOOB:
+ bcm47xxnflash_ops_bcm4706_read(mtd, (u8 *)&tmp, 4);
+ return tmp & 0xFF;
+ }
+
+ pr_err("Invalid command for byte read: 0x%X\n", b47n->curr_command);
+ return 0;
+}
+
+static void bcm47xxnflash_ops_bcm4706_read_buf(struct mtd_info *mtd,
+ uint8_t *buf, int len)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+
+ switch (b47n->curr_command) {
+ case NAND_CMD_READ0:
+ case NAND_CMD_READOOB:
+ bcm47xxnflash_ops_bcm4706_read(mtd, buf, len);
+ return;
+ }
+
+ pr_err("Invalid command for buf read: 0x%X\n", b47n->curr_command);
+}
+
+static void bcm47xxnflash_ops_bcm4706_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)mtd->priv;
+ struct bcm47xxnflash *b47n = (struct bcm47xxnflash *)nand_chip->priv;
+
+ switch (b47n->curr_command) {
+ case NAND_CMD_SEQIN:
+ bcm47xxnflash_ops_bcm4706_write(mtd, buf, len);
+ return;
+ }
+
+ pr_err("Invalid command for buf write: 0x%X\n", b47n->curr_command);
+}
+
+/**************************************************
+ * Init
+ **************************************************/
+
+int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
+{
+ struct nand_chip *nand_chip = (struct nand_chip *)&b47n->nand_chip;
+ int err;
+ u32 freq;
+ u16 clock;
+ u8 w0, w1, w2, w3, w4;
+
+ unsigned long chipsize; /* MiB */
+ u8 tbits, col_bits, col_size, row_bits, row_bsize;
+ u32 val;
+
+ b47n->nand_chip.select_chip = bcm47xxnflash_ops_bcm4706_select_chip;
+ nand_chip->cmd_ctrl = bcm47xxnflash_ops_bcm4706_cmd_ctrl;
+ nand_chip->dev_ready = bcm47xxnflash_ops_bcm4706_dev_ready;
+ b47n->nand_chip.cmdfunc = bcm47xxnflash_ops_bcm4706_cmdfunc;
+ b47n->nand_chip.read_byte = bcm47xxnflash_ops_bcm4706_read_byte;
+ b47n->nand_chip.read_buf = bcm47xxnflash_ops_bcm4706_read_buf;
+ b47n->nand_chip.write_buf = bcm47xxnflash_ops_bcm4706_write_buf;
+
+ nand_chip->chip_delay = 50;
+ b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
+ b47n->nand_chip.ecc.mode = NAND_ECC_NONE; /* TODO: implement ECC */
+
+ /* Enable NAND flash access */
+ bcma_cc_set32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
+ BCMA_CC_4706_FLASHSCFG_NF1);
+
+ /* Configure wait counters */
+ if (b47n->cc->status & BCMA_CC_CHIPST_4706_PKG_OPTION) {
+ /* 400 MHz */
+ freq = 400000000 / 4;
+ } else {
+ freq = bcma_chipco_pll_read(b47n->cc, 4);
+ freq = (freq & 0xFFF) >> 3;
+ /* Fixed reference clock 25 MHz and m = 2 */
+ freq = (freq * 25000000 / 2) / 4;
+ }
+ clock = freq / 1000000;
+ w0 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(15, clock);
+ w1 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(20, clock);
+ w2 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(10, clock);
+ w3 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(10, clock);
+ w4 = bcm47xxnflash_ops_bcm4706_ns_to_cycle(100, clock);
+ bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_WAITCNT0,
+ (w4 << 24 | w3 << 18 | w2 << 12 | w1 << 6 | w0));
+
+ /* Scan NAND */
+ err = nand_scan(&b47n->mtd, 1);
+ if (err) {
+ pr_err("Could not scan NAND flash: %d\n", err);
+ goto exit;
+ }
+
+ /* Configure FLASH */
+ chipsize = b47n->nand_chip.chipsize >> 20;
+ tbits = ffs(chipsize); /* find first bit set */
+ if (!tbits || tbits != fls(chipsize)) {
+ pr_err("Invalid flash size: 0x%lX\n", chipsize);
+ err = -ENOTSUPP;
+ goto exit;
+ }
+ tbits += 19; /* Broadcom increases *index* by 20, we increase *pos* */
+
+ col_bits = b47n->nand_chip.page_shift + 1;
+ col_size = (col_bits + 7) / 8;
+
+ row_bits = tbits - col_bits + 1;
+ row_bsize = (row_bits + 7) / 8;
+
+ val = ((row_bsize - 1) << 6) | ((col_size - 1) << 4) | 2;
+ bcma_cc_write32(b47n->cc, BCMA_CC_NFLASH_CONF, val);
+
+exit:
+ if (err)
+ bcma_cc_mask32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
+ ~BCMA_CC_4706_FLASHSCFG_NF1);
+ return err;
+}
diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c
new file mode 100644
index 0000000..61bd216
--- /dev/null
+++ b/drivers/mtd/nand/bf5xx_nand.c
@@ -0,0 +1,848 @@
+/* linux/drivers/mtd/nand/bf5xx_nand.c
+ *
+ * Copyright 2006-2008 Analog Devices Inc.
+ * http://blackfin.uclinux.org/
+ * Bryan Wu <bryan.wu@analog.com>
+ *
+ * Blackfin BF5xx on-chip NAND flash controller driver
+ *
+ * Derived from drivers/mtd/nand/s3c2410.c
+ * Copyright (c) 2007 Ben Dooks <ben@simtec.co.uk>
+ *
+ * Derived from drivers/mtd/nand/cafe.c
+ * Copyright © 2006 Red Hat, Inc.
+ * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
+ *
+ * Changelog:
+ * 12-Jun-2007 Bryan Wu: Initial version
+ * 18-Jul-2007 Bryan Wu:
+ * - ECC_HW and ECC_SW supported
+ * - DMA supported in ECC_HW
+ * - YAFFS tested as rootfs in both ECC_HW and ECC_SW
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/blackfin.h>
+#include <asm/dma.h>
+#include <asm/cacheflush.h>
+#include <asm/nand.h>
+#include <asm/portmux.h>
+
+#define DRV_NAME "bf5xx-nand"
+#define DRV_VERSION "1.2"
+#define DRV_AUTHOR "Bryan Wu <bryan.wu@analog.com>"
+#define DRV_DESC "BF5xx on-chip NAND FLash Controller Driver"
+
+/* NFC_STAT Masks */
+#define NBUSY 0x01 /* Not Busy */
+#define WB_FULL 0x02 /* Write Buffer Full */
+#define PG_WR_STAT 0x04 /* Page Write Pending */
+#define PG_RD_STAT 0x08 /* Page Read Pending */
+#define WB_EMPTY 0x10 /* Write Buffer Empty */
+
+/* NFC_IRQSTAT Masks */
+#define NBUSYIRQ 0x01 /* Not Busy IRQ */
+#define WB_OVF 0x02 /* Write Buffer Overflow */
+#define WB_EDGE 0x04 /* Write Buffer Edge Detect */
+#define RD_RDY 0x08 /* Read Data Ready */
+#define WR_DONE 0x10 /* Page Write Done */
+
+/* NFC_RST Masks */
+#define ECC_RST 0x01 /* ECC (and NFC counters) Reset */
+
+/* NFC_PGCTL Masks */
+#define PG_RD_START 0x01 /* Page Read Start */
+#define PG_WR_START 0x02 /* Page Write Start */
+
+#ifdef CONFIG_MTD_NAND_BF5XX_HWECC
+static int hardware_ecc = 1;
+#else
+static int hardware_ecc;
+#endif
+
+static const unsigned short bfin_nfc_pin_req[] =
+ {P_NAND_CE,
+ P_NAND_RB,
+ P_NAND_D0,
+ P_NAND_D1,
+ P_NAND_D2,
+ P_NAND_D3,
+ P_NAND_D4,
+ P_NAND_D5,
+ P_NAND_D6,
+ P_NAND_D7,
+ P_NAND_WE,
+ P_NAND_RE,
+ P_NAND_CLE,
+ P_NAND_ALE,
+ 0};
+
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+static struct nand_ecclayout bootrom_ecclayout = {
+ .eccbytes = 24,
+ .eccpos = {
+ 0x8 * 0, 0x8 * 0 + 1, 0x8 * 0 + 2,
+ 0x8 * 1, 0x8 * 1 + 1, 0x8 * 1 + 2,
+ 0x8 * 2, 0x8 * 2 + 1, 0x8 * 2 + 2,
+ 0x8 * 3, 0x8 * 3 + 1, 0x8 * 3 + 2,
+ 0x8 * 4, 0x8 * 4 + 1, 0x8 * 4 + 2,
+ 0x8 * 5, 0x8 * 5 + 1, 0x8 * 5 + 2,
+ 0x8 * 6, 0x8 * 6 + 1, 0x8 * 6 + 2,
+ 0x8 * 7, 0x8 * 7 + 1, 0x8 * 7 + 2
+ },
+ .oobfree = {
+ { 0x8 * 0 + 3, 5 },
+ { 0x8 * 1 + 3, 5 },
+ { 0x8 * 2 + 3, 5 },
+ { 0x8 * 3 + 3, 5 },
+ { 0x8 * 4 + 3, 5 },
+ { 0x8 * 5 + 3, 5 },
+ { 0x8 * 6 + 3, 5 },
+ { 0x8 * 7 + 3, 5 },
+ }
+};
+#endif
+
+/*
+ * Data structures for bf5xx nand flash controller driver
+ */
+
+/* bf5xx nand info */
+struct bf5xx_nand_info {
+ /* mtd info */
+ struct nand_hw_control controller;
+ struct mtd_info mtd;
+ struct nand_chip chip;
+
+ /* platform info */
+ struct bf5xx_nand_platform *platform;
+
+ /* device info */
+ struct device *device;
+
+ /* DMA stuff */
+ struct completion dma_completion;
+};
+
+/*
+ * Conversion functions
+ */
+static struct bf5xx_nand_info *mtd_to_nand_info(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct bf5xx_nand_info, mtd);
+}
+
+static struct bf5xx_nand_info *to_nand_info(struct platform_device *pdev)
+{
+ return platform_get_drvdata(pdev);
+}
+
+static struct bf5xx_nand_platform *to_nand_plat(struct platform_device *pdev)
+{
+ return dev_get_platdata(&pdev->dev);
+}
+
+/*
+ * struct nand_chip interface function pointers
+ */
+
+/*
+ * bf5xx_nand_hwcontrol
+ *
+ * Issue command and address cycles to the chip
+ */
+static void bf5xx_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ while (bfin_read_NFC_STAT() & WB_FULL)
+ cpu_relax();
+
+ if (ctrl & NAND_CLE)
+ bfin_write_NFC_CMD(cmd);
+ else if (ctrl & NAND_ALE)
+ bfin_write_NFC_ADDR(cmd);
+ SSYNC();
+}
+
+/*
+ * bf5xx_nand_devready()
+ *
+ * returns 0 if the nand is busy, 1 if it is ready
+ */
+static int bf5xx_nand_devready(struct mtd_info *mtd)
+{
+ unsigned short val = bfin_read_NFC_STAT();
+
+ if ((val & NBUSY) == NBUSY)
+ return 1;
+ else
+ return 0;
+}
+
+/*
+ * ECC functions
+ * These allow the bf5xx to use the controller's ECC
+ * generator block to ECC the data as it passes through
+ */
+
+/*
+ * ECC error correction function
+ */
+static int bf5xx_nand_correct_data_256(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ u32 syndrome[5];
+ u32 calced, stored;
+ int i;
+ unsigned short failing_bit, failing_byte;
+ u_char data;
+
+ calced = calc_ecc[0] | (calc_ecc[1] << 8) | (calc_ecc[2] << 16);
+ stored = read_ecc[0] | (read_ecc[1] << 8) | (read_ecc[2] << 16);
+
+ syndrome[0] = (calced ^ stored);
+
+ /*
+ * syndrome 0: all zero
+ * No error in data
+ * No action
+ */
+ if (!syndrome[0] || !calced || !stored)
+ return 0;
+
+ /*
+ * sysdrome 0: only one bit is one
+ * ECC data was incorrect
+ * No action
+ */
+ if (hweight32(syndrome[0]) == 1) {
+ dev_err(info->device, "ECC data was incorrect!\n");
+ return 1;
+ }
+
+ syndrome[1] = (calced & 0x7FF) ^ (stored & 0x7FF);
+ syndrome[2] = (calced & 0x7FF) ^ ((calced >> 11) & 0x7FF);
+ syndrome[3] = (stored & 0x7FF) ^ ((stored >> 11) & 0x7FF);
+ syndrome[4] = syndrome[2] ^ syndrome[3];
+
+ for (i = 0; i < 5; i++)
+ dev_info(info->device, "syndrome[%d] 0x%08x\n", i, syndrome[i]);
+
+ dev_info(info->device,
+ "calced[0x%08x], stored[0x%08x]\n",
+ calced, stored);
+
+ /*
+ * sysdrome 0: exactly 11 bits are one, each parity
+ * and parity' pair is 1 & 0 or 0 & 1.
+ * 1-bit correctable error
+ * Correct the error
+ */
+ if (hweight32(syndrome[0]) == 11 && syndrome[4] == 0x7FF) {
+ dev_info(info->device,
+ "1-bit correctable error, correct it.\n");
+ dev_info(info->device,
+ "syndrome[1] 0x%08x\n", syndrome[1]);
+
+ failing_bit = syndrome[1] & 0x7;
+ failing_byte = syndrome[1] >> 0x3;
+ data = *(dat + failing_byte);
+ data = data ^ (0x1 << failing_bit);
+ *(dat + failing_byte) = data;
+
+ return 0;
+ }
+
+ /*
+ * sysdrome 0: random data
+ * More than 1-bit error, non-correctable error
+ * Discard data, mark bad block
+ */
+ dev_err(info->device,
+ "More than 1-bit error, non-correctable error.\n");
+ dev_err(info->device,
+ "Please discard data, mark bad block\n");
+
+ return 1;
+}
+
+static int bf5xx_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+
+ ret = bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+
+ /* If ecc size is 512, correct second 256 bytes */
+ if (chip->ecc.size == 512) {
+ dat += 256;
+ read_ecc += 3;
+ calc_ecc += 3;
+ ret |= bf5xx_nand_correct_data_256(mtd, dat, read_ecc, calc_ecc);
+ }
+
+ return ret;
+}
+
+static void bf5xx_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ return;
+}
+
+static int bf5xx_nand_calculate_ecc(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_code)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ struct nand_chip *chip = mtd->priv;
+ u16 ecc0, ecc1;
+ u32 code[2];
+ u8 *p;
+
+ /* first 3 bytes ECC code for 256 page size */
+ ecc0 = bfin_read_NFC_ECC0();
+ ecc1 = bfin_read_NFC_ECC1();
+
+ code[0] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
+
+ dev_dbg(info->device, "returning ecc 0x%08x\n", code[0]);
+
+ p = (u8 *) code;
+ memcpy(ecc_code, p, 3);
+
+ /* second 3 bytes ECC code for 512 ecc size */
+ if (chip->ecc.size == 512) {
+ ecc0 = bfin_read_NFC_ECC2();
+ ecc1 = bfin_read_NFC_ECC3();
+ code[1] = (ecc0 & 0x7ff) | ((ecc1 & 0x7ff) << 11);
+
+ /* second 3 bytes in ecc_code for second 256
+ * bytes of 512 page size
+ */
+ p = (u8 *) (code + 1);
+ memcpy((ecc_code + 3), p, 3);
+ dev_dbg(info->device, "returning ecc 0x%08x\n", code[1]);
+ }
+
+ return 0;
+}
+
+/*
+ * PIO mode for buffer writing and reading
+ */
+static void bf5xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ unsigned short val;
+
+ /*
+ * Data reads are requested by first writing to NFC_DATA_RD
+ * and then reading back from NFC_READ.
+ */
+ for (i = 0; i < len; i++) {
+ while (bfin_read_NFC_STAT() & WB_FULL)
+ cpu_relax();
+
+ /* Contents do not matter */
+ bfin_write_NFC_DATA_RD(0x0000);
+ SSYNC();
+
+ while ((bfin_read_NFC_IRQSTAT() & RD_RDY) != RD_RDY)
+ cpu_relax();
+
+ buf[i] = bfin_read_NFC_READ();
+
+ val = bfin_read_NFC_IRQSTAT();
+ val |= RD_RDY;
+ bfin_write_NFC_IRQSTAT(val);
+ SSYNC();
+ }
+}
+
+static uint8_t bf5xx_nand_read_byte(struct mtd_info *mtd)
+{
+ uint8_t val;
+
+ bf5xx_nand_read_buf(mtd, &val, 1);
+
+ return val;
+}
+
+static void bf5xx_nand_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ while (bfin_read_NFC_STAT() & WB_FULL)
+ cpu_relax();
+
+ bfin_write_NFC_DATA_WR(buf[i]);
+ SSYNC();
+ }
+}
+
+static void bf5xx_nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ u16 *p = (u16 *) buf;
+ len >>= 1;
+
+ /*
+ * Data reads are requested by first writing to NFC_DATA_RD
+ * and then reading back from NFC_READ.
+ */
+ bfin_write_NFC_DATA_RD(0x5555);
+
+ SSYNC();
+
+ for (i = 0; i < len; i++)
+ p[i] = bfin_read_NFC_READ();
+}
+
+static void bf5xx_nand_write_buf16(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ int i;
+ u16 *p = (u16 *) buf;
+ len >>= 1;
+
+ for (i = 0; i < len; i++)
+ bfin_write_NFC_DATA_WR(p[i]);
+
+ SSYNC();
+}
+
+/*
+ * DMA functions for buffer writing and reading
+ */
+static irqreturn_t bf5xx_nand_dma_irq(int irq, void *dev_id)
+{
+ struct bf5xx_nand_info *info = dev_id;
+
+ clear_dma_irqstat(CH_NFC);
+ disable_dma(CH_NFC);
+ complete(&info->dma_completion);
+
+ return IRQ_HANDLED;
+}
+
+static void bf5xx_nand_dma_rw(struct mtd_info *mtd,
+ uint8_t *buf, int is_read)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ struct nand_chip *chip = mtd->priv;
+ unsigned short val;
+
+ dev_dbg(info->device, " mtd->%p, buf->%p, is_read %d\n",
+ mtd, buf, is_read);
+
+ /*
+ * Before starting a dma transfer, be sure to invalidate/flush
+ * the cache over the address range of your DMA buffer to
+ * prevent cache coherency problems. Otherwise very subtle bugs
+ * can be introduced to your driver.
+ */
+ if (is_read)
+ invalidate_dcache_range((unsigned int)buf,
+ (unsigned int)(buf + chip->ecc.size));
+ else
+ flush_dcache_range((unsigned int)buf,
+ (unsigned int)(buf + chip->ecc.size));
+
+ /*
+ * This register must be written before each page is
+ * transferred to generate the correct ECC register
+ * values.
+ */
+ bfin_write_NFC_RST(ECC_RST);
+ SSYNC();
+ while (bfin_read_NFC_RST() & ECC_RST)
+ cpu_relax();
+
+ disable_dma(CH_NFC);
+ clear_dma_irqstat(CH_NFC);
+
+ /* setup DMA register with Blackfin DMA API */
+ set_dma_config(CH_NFC, 0x0);
+ set_dma_start_addr(CH_NFC, (unsigned long) buf);
+
+ /* The DMAs have different size on BF52x and BF54x */
+#ifdef CONFIG_BF52x
+ set_dma_x_count(CH_NFC, (chip->ecc.size >> 1));
+ set_dma_x_modify(CH_NFC, 2);
+ val = DI_EN | WDSIZE_16;
+#endif
+
+#ifdef CONFIG_BF54x
+ set_dma_x_count(CH_NFC, (chip->ecc.size >> 2));
+ set_dma_x_modify(CH_NFC, 4);
+ val = DI_EN | WDSIZE_32;
+#endif
+ /* setup write or read operation */
+ if (is_read)
+ val |= WNR;
+ set_dma_config(CH_NFC, val);
+ enable_dma(CH_NFC);
+
+ /* Start PAGE read/write operation */
+ if (is_read)
+ bfin_write_NFC_PGCTL(PG_RD_START);
+ else
+ bfin_write_NFC_PGCTL(PG_WR_START);
+ wait_for_completion(&info->dma_completion);
+}
+
+static void bf5xx_nand_dma_read_buf(struct mtd_info *mtd,
+ uint8_t *buf, int len)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ struct nand_chip *chip = mtd->priv;
+
+ dev_dbg(info->device, "mtd->%p, buf->%p, int %d\n", mtd, buf, len);
+
+ if (len == chip->ecc.size)
+ bf5xx_nand_dma_rw(mtd, buf, 1);
+ else
+ bf5xx_nand_read_buf(mtd, buf, len);
+}
+
+static void bf5xx_nand_dma_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ struct bf5xx_nand_info *info = mtd_to_nand_info(mtd);
+ struct nand_chip *chip = mtd->priv;
+
+ dev_dbg(info->device, "mtd->%p, buf->%p, len %d\n", mtd, buf, len);
+
+ if (len == chip->ecc.size)
+ bf5xx_nand_dma_rw(mtd, (uint8_t *)buf, 0);
+ else
+ bf5xx_nand_write_buf(mtd, buf, len);
+}
+
+static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ bf5xx_nand_read_buf(mtd, buf, mtd->writesize);
+ bf5xx_nand_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static int bf5xx_nand_write_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int oob_required,
+ int page)
+{
+ bf5xx_nand_write_buf(mtd, buf, mtd->writesize);
+ bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+/*
+ * System initialization functions
+ */
+static int bf5xx_nand_dma_init(struct bf5xx_nand_info *info)
+{
+ int ret;
+
+ /* Do not use dma */
+ if (!hardware_ecc)
+ return 0;
+
+ init_completion(&info->dma_completion);
+
+ /* Request NFC DMA channel */
+ ret = request_dma(CH_NFC, "BF5XX NFC driver");
+ if (ret < 0) {
+ dev_err(info->device, " unable to get DMA channel\n");
+ return ret;
+ }
+
+#ifdef CONFIG_BF54x
+ /* Setup DMAC1 channel mux for NFC which shared with SDH */
+ bfin_write_DMAC1_PERIMUX(bfin_read_DMAC1_PERIMUX() & ~1);
+ SSYNC();
+#endif
+
+ set_dma_callback(CH_NFC, bf5xx_nand_dma_irq, info);
+
+ /* Turn off the DMA channel first */
+ disable_dma(CH_NFC);
+ return 0;
+}
+
+static void bf5xx_nand_dma_remove(struct bf5xx_nand_info *info)
+{
+ /* Free NFC DMA channel */
+ if (hardware_ecc)
+ free_dma(CH_NFC);
+}
+
+/*
+ * BF5XX NFC hardware initialization
+ * - pin mux setup
+ * - clear interrupt status
+ */
+static int bf5xx_nand_hw_init(struct bf5xx_nand_info *info)
+{
+ int err = 0;
+ unsigned short val;
+ struct bf5xx_nand_platform *plat = info->platform;
+
+ /* setup NFC_CTL register */
+ dev_info(info->device,
+ "data_width=%d, wr_dly=%d, rd_dly=%d\n",
+ (plat->data_width ? 16 : 8),
+ plat->wr_dly, plat->rd_dly);
+
+ val = (1 << NFC_PG_SIZE_OFFSET) |
+ (plat->data_width << NFC_NWIDTH_OFFSET) |
+ (plat->rd_dly << NFC_RDDLY_OFFSET) |
+ (plat->wr_dly << NFC_WRDLY_OFFSET);
+ dev_dbg(info->device, "NFC_CTL is 0x%04x\n", val);
+
+ bfin_write_NFC_CTL(val);
+ SSYNC();
+
+ /* clear interrupt status */
+ bfin_write_NFC_IRQMASK(0x0);
+ SSYNC();
+ val = bfin_read_NFC_IRQSTAT();
+ bfin_write_NFC_IRQSTAT(val);
+ SSYNC();
+
+ /* DMA initialization */
+ if (bf5xx_nand_dma_init(info))
+ err = -ENXIO;
+
+ return err;
+}
+
+/*
+ * Device management interface
+ */
+static int bf5xx_nand_add_partition(struct bf5xx_nand_info *info)
+{
+ struct mtd_info *mtd = &info->mtd;
+ struct mtd_partition *parts = info->platform->partitions;
+ int nr = info->platform->nr_partitions;
+
+ return mtd_device_register(mtd, parts, nr);
+}
+
+static int bf5xx_nand_remove(struct platform_device *pdev)
+{
+ struct bf5xx_nand_info *info = to_nand_info(pdev);
+
+ /* first thing we need to do is release all our mtds
+ * and their partitions, then go through freeing the
+ * resources used
+ */
+ nand_release(&info->mtd);
+
+ peripheral_free_list(bfin_nfc_pin_req);
+ bf5xx_nand_dma_remove(info);
+
+ return 0;
+}
+
+static int bf5xx_nand_scan(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+
+ ret = nand_scan_ident(mtd, 1, NULL);
+ if (ret)
+ return ret;
+
+ if (hardware_ecc) {
+ /*
+ * for nand with page size > 512B, think it as several sections with 512B
+ */
+ if (likely(mtd->writesize >= 512)) {
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 6;
+ chip->ecc.strength = 2;
+ } else {
+ chip->ecc.size = 256;
+ chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
+ bfin_write_NFC_CTL(bfin_read_NFC_CTL() & ~(1 << NFC_PG_SIZE_OFFSET));
+ SSYNC();
+ }
+ }
+
+ return nand_scan_tail(mtd);
+}
+
+/*
+ * bf5xx_nand_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code checks to see if
+ * it can allocate all necessary resources then calls the
+ * nand layer to look for devices
+ */
+static int bf5xx_nand_probe(struct platform_device *pdev)
+{
+ struct bf5xx_nand_platform *plat = to_nand_plat(pdev);
+ struct bf5xx_nand_info *info = NULL;
+ struct nand_chip *chip = NULL;
+ struct mtd_info *mtd = NULL;
+ int err = 0;
+
+ dev_dbg(&pdev->dev, "(%p)\n", pdev);
+
+ if (!plat) {
+ dev_err(&pdev->dev, "no platform specific information\n");
+ return -EINVAL;
+ }
+
+ if (peripheral_request_list(bfin_nfc_pin_req, DRV_NAME)) {
+ dev_err(&pdev->dev, "requesting Peripherals failed\n");
+ return -EFAULT;
+ }
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (info == NULL) {
+ err = -ENOMEM;
+ goto out_err;
+ }
+
+ platform_set_drvdata(pdev, info);
+
+ spin_lock_init(&info->controller.lock);
+ init_waitqueue_head(&info->controller.wq);
+
+ info->device = &pdev->dev;
+ info->platform = plat;
+
+ /* initialise chip data struct */
+ chip = &info->chip;
+
+ if (plat->data_width)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ chip->options |= NAND_CACHEPRG | NAND_SKIP_BBTSCAN;
+
+ chip->read_buf = (plat->data_width) ?
+ bf5xx_nand_read_buf16 : bf5xx_nand_read_buf;
+ chip->write_buf = (plat->data_width) ?
+ bf5xx_nand_write_buf16 : bf5xx_nand_write_buf;
+
+ chip->read_byte = bf5xx_nand_read_byte;
+
+ chip->cmd_ctrl = bf5xx_nand_hwcontrol;
+ chip->dev_ready = bf5xx_nand_devready;
+
+ chip->priv = &info->mtd;
+ chip->controller = &info->controller;
+
+ chip->IO_ADDR_R = (void __iomem *) NFC_READ;
+ chip->IO_ADDR_W = (void __iomem *) NFC_DATA_WR;
+
+ chip->chip_delay = 0;
+
+ /* initialise mtd info data struct */
+ mtd = &info->mtd;
+ mtd->priv = chip;
+ mtd->dev.parent = &pdev->dev;
+
+ /* initialise the hardware */
+ err = bf5xx_nand_hw_init(info);
+ if (err)
+ goto out_err;
+
+ /* setup hardware ECC data struct */
+ if (hardware_ecc) {
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+ chip->ecc.layout = &bootrom_ecclayout;
+#endif
+ chip->read_buf = bf5xx_nand_dma_read_buf;
+ chip->write_buf = bf5xx_nand_dma_write_buf;
+ chip->ecc.calculate = bf5xx_nand_calculate_ecc;
+ chip->ecc.correct = bf5xx_nand_correct_data;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.hwctl = bf5xx_nand_enable_hwecc;
+ chip->ecc.read_page_raw = bf5xx_nand_read_page_raw;
+ chip->ecc.write_page_raw = bf5xx_nand_write_page_raw;
+ } else {
+ chip->ecc.mode = NAND_ECC_SOFT;
+ }
+
+ /* scan hardware nand chip and setup mtd info data struct */
+ if (bf5xx_nand_scan(mtd)) {
+ err = -ENXIO;
+ goto out_err_nand_scan;
+ }
+
+#ifdef CONFIG_MTD_NAND_BF5XX_BOOTROM_ECC
+ chip->badblockpos = 63;
+#endif
+
+ /* add NAND partition */
+ bf5xx_nand_add_partition(info);
+
+ dev_dbg(&pdev->dev, "initialised ok\n");
+ return 0;
+
+out_err_nand_scan:
+ bf5xx_nand_dma_remove(info);
+out_err:
+ peripheral_free_list(bfin_nfc_pin_req);
+
+ return err;
+}
+
+/* driver device registration */
+static struct platform_driver bf5xx_nand_driver = {
+ .probe = bf5xx_nand_probe,
+ .remove = bf5xx_nand_remove,
+ .driver = {
+ .name = DRV_NAME,
+ },
+};
+
+module_platform_driver(bf5xx_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR(DRV_AUTHOR);
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_ALIAS("platform:" DRV_NAME);
diff --git a/drivers/mtd/nand/brcmnand/Makefile b/drivers/mtd/nand/brcmnand/Makefile
new file mode 100644
index 0000000..3b1fbfd
--- /dev/null
+++ b/drivers/mtd/nand/brcmnand/Makefile
@@ -0,0 +1,6 @@
+# link order matters; don't link the more generic brcmstb_nand.o before the
+# more specific iproc_nand.o, for instance
+obj-$(CONFIG_MTD_NAND_BRCMNAND) += iproc_nand.o
+obj-$(CONFIG_MTD_NAND_BRCMNAND) += bcm63138_nand.o
+obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmstb_nand.o
+obj-$(CONFIG_MTD_NAND_BRCMNAND) += brcmnand.o
diff --git a/drivers/mtd/nand/brcmnand/bcm63138_nand.c b/drivers/mtd/nand/brcmnand/bcm63138_nand.c
new file mode 100644
index 0000000..59444b3
--- /dev/null
+++ b/drivers/mtd/nand/brcmnand/bcm63138_nand.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "brcmnand.h"
+
+struct bcm63138_nand_soc {
+ struct brcmnand_soc soc;
+ void __iomem *base;
+};
+
+#define BCM63138_NAND_INT_STATUS 0x00
+#define BCM63138_NAND_INT_EN 0x04
+
+enum {
+ BCM63138_CTLRDY = BIT(4),
+};
+
+static bool bcm63138_nand_intc_ack(struct brcmnand_soc *soc)
+{
+ struct bcm63138_nand_soc *priv =
+ container_of(soc, struct bcm63138_nand_soc, soc);
+ void __iomem *mmio = priv->base + BCM63138_NAND_INT_STATUS;
+ u32 val = brcmnand_readl(mmio);
+
+ if (val & BCM63138_CTLRDY) {
+ brcmnand_writel(val & ~BCM63138_CTLRDY, mmio);
+ return true;
+ }
+
+ return false;
+}
+
+static void bcm63138_nand_intc_set(struct brcmnand_soc *soc, bool en)
+{
+ struct bcm63138_nand_soc *priv =
+ container_of(soc, struct bcm63138_nand_soc, soc);
+ void __iomem *mmio = priv->base + BCM63138_NAND_INT_EN;
+ u32 val = brcmnand_readl(mmio);
+
+ if (en)
+ val |= BCM63138_CTLRDY;
+ else
+ val &= ~BCM63138_CTLRDY;
+
+ brcmnand_writel(val, mmio);
+}
+
+static int bcm63138_nand_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bcm63138_nand_soc *priv;
+ struct brcmnand_soc *soc;
+ struct resource *res;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ soc = &priv->soc;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand-int-base");
+ priv->base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ soc->ctlrdy_ack = bcm63138_nand_intc_ack;
+ soc->ctlrdy_set_enabled = bcm63138_nand_intc_set;
+
+ return brcmnand_probe(pdev, soc);
+}
+
+static const struct of_device_id bcm63138_nand_of_match[] = {
+ { .compatible = "brcm,nand-bcm63138" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, bcm63138_nand_of_match);
+
+static struct platform_driver bcm63138_nand_driver = {
+ .probe = bcm63138_nand_probe,
+ .remove = brcmnand_remove,
+ .driver = {
+ .name = "bcm63138_nand",
+ .pm = &brcmnand_pm_ops,
+ .of_match_table = bcm63138_nand_of_match,
+ }
+};
+module_platform_driver(bcm63138_nand_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("NAND driver for BCM63138");
diff --git a/drivers/mtd/nand/brcmnand/brcmnand.c b/drivers/mtd/nand/brcmnand/brcmnand.c
new file mode 100644
index 0000000..4a07ba1
--- /dev/null
+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
@@ -0,0 +1,2313 @@
+/*
+ * Copyright © 2010-2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/dma-mapping.h>
+#include <linux/ioport.h>
+#include <linux/bug.h>
+#include <linux/kernel.h>
+#include <linux/bitops.h>
+#include <linux/mm.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/list.h>
+#include <linux/log2.h>
+
+#include "brcmnand.h"
+
+/*
+ * This flag controls if WP stays on between erase/write commands to mitigate
+ * flash corruption due to power glitches. Values:
+ * 0: NAND_WP is not used or not available
+ * 1: NAND_WP is set by default, cleared for erase/write operations
+ * 2: NAND_WP is always cleared
+ */
+static int wp_on = 1;
+module_param(wp_on, int, 0444);
+
+/***********************************************************************
+ * Definitions
+ ***********************************************************************/
+
+#define DRV_NAME "brcmnand"
+
+#define CMD_NULL 0x00
+#define CMD_PAGE_READ 0x01
+#define CMD_SPARE_AREA_READ 0x02
+#define CMD_STATUS_READ 0x03
+#define CMD_PROGRAM_PAGE 0x04
+#define CMD_PROGRAM_SPARE_AREA 0x05
+#define CMD_COPY_BACK 0x06
+#define CMD_DEVICE_ID_READ 0x07
+#define CMD_BLOCK_ERASE 0x08
+#define CMD_FLASH_RESET 0x09
+#define CMD_BLOCKS_LOCK 0x0a
+#define CMD_BLOCKS_LOCK_DOWN 0x0b
+#define CMD_BLOCKS_UNLOCK 0x0c
+#define CMD_READ_BLOCKS_LOCK_STATUS 0x0d
+#define CMD_PARAMETER_READ 0x0e
+#define CMD_PARAMETER_CHANGE_COL 0x0f
+#define CMD_LOW_LEVEL_OP 0x10
+
+struct brcm_nand_dma_desc {
+ u32 next_desc;
+ u32 next_desc_ext;
+ u32 cmd_irq;
+ u32 dram_addr;
+ u32 dram_addr_ext;
+ u32 tfr_len;
+ u32 total_len;
+ u32 flash_addr;
+ u32 flash_addr_ext;
+ u32 cs;
+ u32 pad2[5];
+ u32 status_valid;
+} __packed;
+
+/* Bitfields for brcm_nand_dma_desc::status_valid */
+#define FLASH_DMA_ECC_ERROR (1 << 8)
+#define FLASH_DMA_CORR_ERROR (1 << 9)
+
+/* 512B flash cache in the NAND controller HW */
+#define FC_SHIFT 9U
+#define FC_BYTES 512U
+#define FC_WORDS (FC_BYTES >> 2)
+
+#define BRCMNAND_MIN_PAGESIZE 512
+#define BRCMNAND_MIN_BLOCKSIZE (8 * 1024)
+#define BRCMNAND_MIN_DEVSIZE (4ULL * 1024 * 1024)
+
+/* Controller feature flags */
+enum {
+ BRCMNAND_HAS_1K_SECTORS = BIT(0),
+ BRCMNAND_HAS_PREFETCH = BIT(1),
+ BRCMNAND_HAS_CACHE_MODE = BIT(2),
+ BRCMNAND_HAS_WP = BIT(3),
+};
+
+struct brcmnand_controller {
+ struct device *dev;
+ struct nand_hw_control controller;
+ void __iomem *nand_base;
+ void __iomem *nand_fc; /* flash cache */
+ void __iomem *flash_dma_base;
+ unsigned int irq;
+ unsigned int dma_irq;
+ int nand_version;
+
+ /* Some SoCs provide custom interrupt status register(s) */
+ struct brcmnand_soc *soc;
+
+ int cmd_pending;
+ bool dma_pending;
+ struct completion done;
+ struct completion dma_done;
+
+ /* List of NAND hosts (one for each chip-select) */
+ struct list_head host_list;
+
+ struct brcm_nand_dma_desc *dma_desc;
+ dma_addr_t dma_pa;
+
+ /* in-memory cache of the FLASH_CACHE, used only for some commands */
+ u32 flash_cache[FC_WORDS];
+
+ /* Controller revision details */
+ const u16 *reg_offsets;
+ unsigned int reg_spacing; /* between CS1, CS2, ... regs */
+ const u8 *cs_offsets; /* within each chip-select */
+ const u8 *cs0_offsets; /* within CS0, if different */
+ unsigned int max_block_size;
+ const unsigned int *block_sizes;
+ unsigned int max_page_size;
+ const unsigned int *page_sizes;
+ unsigned int max_oob;
+ u32 features;
+
+ /* for low-power standby/resume only */
+ u32 nand_cs_nand_select;
+ u32 nand_cs_nand_xor;
+ u32 corr_stat_threshold;
+ u32 flash_dma_mode;
+};
+
+struct brcmnand_cfg {
+ u64 device_size;
+ unsigned int block_size;
+ unsigned int page_size;
+ unsigned int spare_area_size;
+ unsigned int device_width;
+ unsigned int col_adr_bytes;
+ unsigned int blk_adr_bytes;
+ unsigned int ful_adr_bytes;
+ unsigned int sector_size_1k;
+ unsigned int ecc_level;
+ /* use for low-power standby/resume only */
+ u32 acc_control;
+ u32 config;
+ u32 config_ext;
+ u32 timing_1;
+ u32 timing_2;
+};
+
+struct brcmnand_host {
+ struct list_head node;
+ struct device_node *of_node;
+
+ struct nand_chip chip;
+ struct mtd_info mtd;
+ struct platform_device *pdev;
+ int cs;
+
+ unsigned int last_cmd;
+ unsigned int last_byte;
+ u64 last_addr;
+ struct brcmnand_cfg hwcfg;
+ struct brcmnand_controller *ctrl;
+};
+
+enum brcmnand_reg {
+ BRCMNAND_CMD_START = 0,
+ BRCMNAND_CMD_EXT_ADDRESS,
+ BRCMNAND_CMD_ADDRESS,
+ BRCMNAND_INTFC_STATUS,
+ BRCMNAND_CS_SELECT,
+ BRCMNAND_CS_XOR,
+ BRCMNAND_LL_OP,
+ BRCMNAND_CS0_BASE,
+ BRCMNAND_CS1_BASE, /* CS1 regs, if non-contiguous */
+ BRCMNAND_CORR_THRESHOLD,
+ BRCMNAND_CORR_THRESHOLD_EXT,
+ BRCMNAND_UNCORR_COUNT,
+ BRCMNAND_CORR_COUNT,
+ BRCMNAND_CORR_EXT_ADDR,
+ BRCMNAND_CORR_ADDR,
+ BRCMNAND_UNCORR_EXT_ADDR,
+ BRCMNAND_UNCORR_ADDR,
+ BRCMNAND_SEMAPHORE,
+ BRCMNAND_ID,
+ BRCMNAND_ID_EXT,
+ BRCMNAND_LL_RDATA,
+ BRCMNAND_OOB_READ_BASE,
+ BRCMNAND_OOB_READ_10_BASE, /* offset 0x10, if non-contiguous */
+ BRCMNAND_OOB_WRITE_BASE,
+ BRCMNAND_OOB_WRITE_10_BASE, /* offset 0x10, if non-contiguous */
+ BRCMNAND_FC_BASE,
+};
+
+/* BRCMNAND v4.0 */
+static const u16 brcmnand_regs_v40[] = {
+ [BRCMNAND_CMD_START] = 0x04,
+ [BRCMNAND_CMD_EXT_ADDRESS] = 0x08,
+ [BRCMNAND_CMD_ADDRESS] = 0x0c,
+ [BRCMNAND_INTFC_STATUS] = 0x6c,
+ [BRCMNAND_CS_SELECT] = 0x14,
+ [BRCMNAND_CS_XOR] = 0x18,
+ [BRCMNAND_LL_OP] = 0x178,
+ [BRCMNAND_CS0_BASE] = 0x40,
+ [BRCMNAND_CS1_BASE] = 0xd0,
+ [BRCMNAND_CORR_THRESHOLD] = 0x84,
+ [BRCMNAND_CORR_THRESHOLD_EXT] = 0,
+ [BRCMNAND_UNCORR_COUNT] = 0,
+ [BRCMNAND_CORR_COUNT] = 0,
+ [BRCMNAND_CORR_EXT_ADDR] = 0x70,
+ [BRCMNAND_CORR_ADDR] = 0x74,
+ [BRCMNAND_UNCORR_EXT_ADDR] = 0x78,
+ [BRCMNAND_UNCORR_ADDR] = 0x7c,
+ [BRCMNAND_SEMAPHORE] = 0x58,
+ [BRCMNAND_ID] = 0x60,
+ [BRCMNAND_ID_EXT] = 0x64,
+ [BRCMNAND_LL_RDATA] = 0x17c,
+ [BRCMNAND_OOB_READ_BASE] = 0x20,
+ [BRCMNAND_OOB_READ_10_BASE] = 0x130,
+ [BRCMNAND_OOB_WRITE_BASE] = 0x30,
+ [BRCMNAND_OOB_WRITE_10_BASE] = 0,
+ [BRCMNAND_FC_BASE] = 0x200,
+};
+
+/* BRCMNAND v5.0 */
+static const u16 brcmnand_regs_v50[] = {
+ [BRCMNAND_CMD_START] = 0x04,
+ [BRCMNAND_CMD_EXT_ADDRESS] = 0x08,
+ [BRCMNAND_CMD_ADDRESS] = 0x0c,
+ [BRCMNAND_INTFC_STATUS] = 0x6c,
+ [BRCMNAND_CS_SELECT] = 0x14,
+ [BRCMNAND_CS_XOR] = 0x18,
+ [BRCMNAND_LL_OP] = 0x178,
+ [BRCMNAND_CS0_BASE] = 0x40,
+ [BRCMNAND_CS1_BASE] = 0xd0,
+ [BRCMNAND_CORR_THRESHOLD] = 0x84,
+ [BRCMNAND_CORR_THRESHOLD_EXT] = 0,
+ [BRCMNAND_UNCORR_COUNT] = 0,
+ [BRCMNAND_CORR_COUNT] = 0,
+ [BRCMNAND_CORR_EXT_ADDR] = 0x70,
+ [BRCMNAND_CORR_ADDR] = 0x74,
+ [BRCMNAND_UNCORR_EXT_ADDR] = 0x78,
+ [BRCMNAND_UNCORR_ADDR] = 0x7c,
+ [BRCMNAND_SEMAPHORE] = 0x58,
+ [BRCMNAND_ID] = 0x60,
+ [BRCMNAND_ID_EXT] = 0x64,
+ [BRCMNAND_LL_RDATA] = 0x17c,
+ [BRCMNAND_OOB_READ_BASE] = 0x20,
+ [BRCMNAND_OOB_READ_10_BASE] = 0x130,
+ [BRCMNAND_OOB_WRITE_BASE] = 0x30,
+ [BRCMNAND_OOB_WRITE_10_BASE] = 0x140,
+ [BRCMNAND_FC_BASE] = 0x200,
+};
+
+/* BRCMNAND v6.0 - v7.1 */
+static const u16 brcmnand_regs_v60[] = {
+ [BRCMNAND_CMD_START] = 0x04,
+ [BRCMNAND_CMD_EXT_ADDRESS] = 0x08,
+ [BRCMNAND_CMD_ADDRESS] = 0x0c,
+ [BRCMNAND_INTFC_STATUS] = 0x14,
+ [BRCMNAND_CS_SELECT] = 0x18,
+ [BRCMNAND_CS_XOR] = 0x1c,
+ [BRCMNAND_LL_OP] = 0x20,
+ [BRCMNAND_CS0_BASE] = 0x50,
+ [BRCMNAND_CS1_BASE] = 0,
+ [BRCMNAND_CORR_THRESHOLD] = 0xc0,
+ [BRCMNAND_CORR_THRESHOLD_EXT] = 0xc4,
+ [BRCMNAND_UNCORR_COUNT] = 0xfc,
+ [BRCMNAND_CORR_COUNT] = 0x100,
+ [BRCMNAND_CORR_EXT_ADDR] = 0x10c,
+ [BRCMNAND_CORR_ADDR] = 0x110,
+ [BRCMNAND_UNCORR_EXT_ADDR] = 0x114,
+ [BRCMNAND_UNCORR_ADDR] = 0x118,
+ [BRCMNAND_SEMAPHORE] = 0x150,
+ [BRCMNAND_ID] = 0x194,
+ [BRCMNAND_ID_EXT] = 0x198,
+ [BRCMNAND_LL_RDATA] = 0x19c,
+ [BRCMNAND_OOB_READ_BASE] = 0x200,
+ [BRCMNAND_OOB_READ_10_BASE] = 0,
+ [BRCMNAND_OOB_WRITE_BASE] = 0x280,
+ [BRCMNAND_OOB_WRITE_10_BASE] = 0,
+ [BRCMNAND_FC_BASE] = 0x400,
+};
+
+/* BRCMNAND v7.1 */
+static const u16 brcmnand_regs_v71[] = {
+ [BRCMNAND_CMD_START] = 0x04,
+ [BRCMNAND_CMD_EXT_ADDRESS] = 0x08,
+ [BRCMNAND_CMD_ADDRESS] = 0x0c,
+ [BRCMNAND_INTFC_STATUS] = 0x14,
+ [BRCMNAND_CS_SELECT] = 0x18,
+ [BRCMNAND_CS_XOR] = 0x1c,
+ [BRCMNAND_LL_OP] = 0x20,
+ [BRCMNAND_CS0_BASE] = 0x50,
+ [BRCMNAND_CS1_BASE] = 0,
+ [BRCMNAND_CORR_THRESHOLD] = 0xdc,
+ [BRCMNAND_CORR_THRESHOLD_EXT] = 0xe0,
+ [BRCMNAND_UNCORR_COUNT] = 0xfc,
+ [BRCMNAND_CORR_COUNT] = 0x100,
+ [BRCMNAND_CORR_EXT_ADDR] = 0x10c,
+ [BRCMNAND_CORR_ADDR] = 0x110,
+ [BRCMNAND_UNCORR_EXT_ADDR] = 0x114,
+ [BRCMNAND_UNCORR_ADDR] = 0x118,
+ [BRCMNAND_SEMAPHORE] = 0x150,
+ [BRCMNAND_ID] = 0x194,
+ [BRCMNAND_ID_EXT] = 0x198,
+ [BRCMNAND_LL_RDATA] = 0x19c,
+ [BRCMNAND_OOB_READ_BASE] = 0x200,
+ [BRCMNAND_OOB_READ_10_BASE] = 0,
+ [BRCMNAND_OOB_WRITE_BASE] = 0x280,
+ [BRCMNAND_OOB_WRITE_10_BASE] = 0,
+ [BRCMNAND_FC_BASE] = 0x400,
+};
+
+enum brcmnand_cs_reg {
+ BRCMNAND_CS_CFG_EXT = 0,
+ BRCMNAND_CS_CFG,
+ BRCMNAND_CS_ACC_CONTROL,
+ BRCMNAND_CS_TIMING1,
+ BRCMNAND_CS_TIMING2,
+};
+
+/* Per chip-select offsets for v7.1 */
+static const u8 brcmnand_cs_offsets_v71[] = {
+ [BRCMNAND_CS_ACC_CONTROL] = 0x00,
+ [BRCMNAND_CS_CFG_EXT] = 0x04,
+ [BRCMNAND_CS_CFG] = 0x08,
+ [BRCMNAND_CS_TIMING1] = 0x0c,
+ [BRCMNAND_CS_TIMING2] = 0x10,
+};
+
+/* Per chip-select offsets for pre v7.1, except CS0 on <= v5.0 */
+static const u8 brcmnand_cs_offsets[] = {
+ [BRCMNAND_CS_ACC_CONTROL] = 0x00,
+ [BRCMNAND_CS_CFG_EXT] = 0x04,
+ [BRCMNAND_CS_CFG] = 0x04,
+ [BRCMNAND_CS_TIMING1] = 0x08,
+ [BRCMNAND_CS_TIMING2] = 0x0c,
+};
+
+/* Per chip-select offset for <= v5.0 on CS0 only */
+static const u8 brcmnand_cs_offsets_cs0[] = {
+ [BRCMNAND_CS_ACC_CONTROL] = 0x00,
+ [BRCMNAND_CS_CFG_EXT] = 0x08,
+ [BRCMNAND_CS_CFG] = 0x08,
+ [BRCMNAND_CS_TIMING1] = 0x10,
+ [BRCMNAND_CS_TIMING2] = 0x14,
+};
+
+/*
+ * Bitfields for the CFG and CFG_EXT registers. Pre-v7.1 controllers only had
+ * one config register, but once the bitfields overflowed, newer controllers
+ * (v7.1 and newer) added a CFG_EXT register and shuffled a few fields around.
+ */
+enum {
+ CFG_BLK_ADR_BYTES_SHIFT = 8,
+ CFG_COL_ADR_BYTES_SHIFT = 12,
+ CFG_FUL_ADR_BYTES_SHIFT = 16,
+ CFG_BUS_WIDTH_SHIFT = 23,
+ CFG_BUS_WIDTH = BIT(CFG_BUS_WIDTH_SHIFT),
+ CFG_DEVICE_SIZE_SHIFT = 24,
+
+ /* Only for pre-v7.1 (with no CFG_EXT register) */
+ CFG_PAGE_SIZE_SHIFT = 20,
+ CFG_BLK_SIZE_SHIFT = 28,
+
+ /* Only for v7.1+ (with CFG_EXT register) */
+ CFG_EXT_PAGE_SIZE_SHIFT = 0,
+ CFG_EXT_BLK_SIZE_SHIFT = 4,
+};
+
+/* BRCMNAND_INTFC_STATUS */
+enum {
+ INTFC_FLASH_STATUS = GENMASK(7, 0),
+
+ INTFC_ERASED = BIT(27),
+ INTFC_OOB_VALID = BIT(28),
+ INTFC_CACHE_VALID = BIT(29),
+ INTFC_FLASH_READY = BIT(30),
+ INTFC_CTLR_READY = BIT(31),
+};
+
+static inline u32 nand_readreg(struct brcmnand_controller *ctrl, u32 offs)
+{
+ return brcmnand_readl(ctrl->nand_base + offs);
+}
+
+static inline void nand_writereg(struct brcmnand_controller *ctrl, u32 offs,
+ u32 val)
+{
+ brcmnand_writel(val, ctrl->nand_base + offs);
+}
+
+static int brcmnand_revision_init(struct brcmnand_controller *ctrl)
+{
+ static const unsigned int block_sizes_v6[] = { 8, 16, 128, 256, 512, 1024, 2048, 0 };
+ static const unsigned int block_sizes_v4[] = { 16, 128, 8, 512, 256, 1024, 2048, 0 };
+ static const unsigned int page_sizes[] = { 512, 2048, 4096, 8192, 0 };
+
+ ctrl->nand_version = nand_readreg(ctrl, 0) & 0xffff;
+
+ /* Only support v4.0+? */
+ if (ctrl->nand_version < 0x0400) {
+ dev_err(ctrl->dev, "version %#x not supported\n",
+ ctrl->nand_version);
+ return -ENODEV;
+ }
+
+ /* Register offsets */
+ if (ctrl->nand_version >= 0x0701)
+ ctrl->reg_offsets = brcmnand_regs_v71;
+ else if (ctrl->nand_version >= 0x0600)
+ ctrl->reg_offsets = brcmnand_regs_v60;
+ else if (ctrl->nand_version >= 0x0500)
+ ctrl->reg_offsets = brcmnand_regs_v50;
+ else if (ctrl->nand_version >= 0x0400)
+ ctrl->reg_offsets = brcmnand_regs_v40;
+
+ /* Chip-select stride */
+ if (ctrl->nand_version >= 0x0701)
+ ctrl->reg_spacing = 0x14;
+ else
+ ctrl->reg_spacing = 0x10;
+
+ /* Per chip-select registers */
+ if (ctrl->nand_version >= 0x0701) {
+ ctrl->cs_offsets = brcmnand_cs_offsets_v71;
+ } else {
+ ctrl->cs_offsets = brcmnand_cs_offsets;
+
+ /* v5.0 and earlier has a different CS0 offset layout */
+ if (ctrl->nand_version <= 0x0500)
+ ctrl->cs0_offsets = brcmnand_cs_offsets_cs0;
+ }
+
+ /* Page / block sizes */
+ if (ctrl->nand_version >= 0x0701) {
+ /* >= v7.1 use nice power-of-2 values! */
+ ctrl->max_page_size = 16 * 1024;
+ ctrl->max_block_size = 2 * 1024 * 1024;
+ } else {
+ ctrl->page_sizes = page_sizes;
+ if (ctrl->nand_version >= 0x0600)
+ ctrl->block_sizes = block_sizes_v6;
+ else
+ ctrl->block_sizes = block_sizes_v4;
+
+ if (ctrl->nand_version < 0x0400) {
+ ctrl->max_page_size = 4096;
+ ctrl->max_block_size = 512 * 1024;
+ }
+ }
+
+ /* Maximum spare area sector size (per 512B) */
+ if (ctrl->nand_version >= 0x0600)
+ ctrl->max_oob = 64;
+ else if (ctrl->nand_version >= 0x0500)
+ ctrl->max_oob = 32;
+ else
+ ctrl->max_oob = 16;
+
+ /* v6.0 and newer (except v6.1) have prefetch support */
+ if (ctrl->nand_version >= 0x0600 && ctrl->nand_version != 0x0601)
+ ctrl->features |= BRCMNAND_HAS_PREFETCH;
+
+ /*
+ * v6.x has cache mode, but it's implemented differently. Ignore it for
+ * now.
+ */
+ if (ctrl->nand_version >= 0x0700)
+ ctrl->features |= BRCMNAND_HAS_CACHE_MODE;
+
+ if (ctrl->nand_version >= 0x0500)
+ ctrl->features |= BRCMNAND_HAS_1K_SECTORS;
+
+ if (ctrl->nand_version >= 0x0700)
+ ctrl->features |= BRCMNAND_HAS_WP;
+ else if (of_property_read_bool(ctrl->dev->of_node, "brcm,nand-has-wp"))
+ ctrl->features |= BRCMNAND_HAS_WP;
+
+ return 0;
+}
+
+static inline u32 brcmnand_read_reg(struct brcmnand_controller *ctrl,
+ enum brcmnand_reg reg)
+{
+ u16 offs = ctrl->reg_offsets[reg];
+
+ if (offs)
+ return nand_readreg(ctrl, offs);
+ else
+ return 0;
+}
+
+static inline void brcmnand_write_reg(struct brcmnand_controller *ctrl,
+ enum brcmnand_reg reg, u32 val)
+{
+ u16 offs = ctrl->reg_offsets[reg];
+
+ if (offs)
+ nand_writereg(ctrl, offs, val);
+}
+
+static inline void brcmnand_rmw_reg(struct brcmnand_controller *ctrl,
+ enum brcmnand_reg reg, u32 mask, unsigned
+ int shift, u32 val)
+{
+ u32 tmp = brcmnand_read_reg(ctrl, reg);
+
+ tmp &= ~mask;
+ tmp |= val << shift;
+ brcmnand_write_reg(ctrl, reg, tmp);
+}
+
+static inline u32 brcmnand_read_fc(struct brcmnand_controller *ctrl, int word)
+{
+ return __raw_readl(ctrl->nand_fc + word * 4);
+}
+
+static inline void brcmnand_write_fc(struct brcmnand_controller *ctrl,
+ int word, u32 val)
+{
+ __raw_writel(val, ctrl->nand_fc + word * 4);
+}
+
+static inline u16 brcmnand_cs_offset(struct brcmnand_controller *ctrl, int cs,
+ enum brcmnand_cs_reg reg)
+{
+ u16 offs_cs0 = ctrl->reg_offsets[BRCMNAND_CS0_BASE];
+ u16 offs_cs1 = ctrl->reg_offsets[BRCMNAND_CS1_BASE];
+ u8 cs_offs;
+
+ if (cs == 0 && ctrl->cs0_offsets)
+ cs_offs = ctrl->cs0_offsets[reg];
+ else
+ cs_offs = ctrl->cs_offsets[reg];
+
+ if (cs && offs_cs1)
+ return offs_cs1 + (cs - 1) * ctrl->reg_spacing + cs_offs;
+
+ return offs_cs0 + cs * ctrl->reg_spacing + cs_offs;
+}
+
+static inline u32 brcmnand_count_corrected(struct brcmnand_controller *ctrl)
+{
+ if (ctrl->nand_version < 0x0600)
+ return 1;
+ return brcmnand_read_reg(ctrl, BRCMNAND_CORR_COUNT);
+}
+
+static void brcmnand_wr_corr_thresh(struct brcmnand_host *host, u8 val)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ unsigned int shift = 0, bits;
+ enum brcmnand_reg reg = BRCMNAND_CORR_THRESHOLD;
+ int cs = host->cs;
+
+ if (ctrl->nand_version >= 0x0600)
+ bits = 6;
+ else if (ctrl->nand_version >= 0x0500)
+ bits = 5;
+ else
+ bits = 4;
+
+ if (ctrl->nand_version >= 0x0600) {
+ if (cs >= 5)
+ reg = BRCMNAND_CORR_THRESHOLD_EXT;
+ shift = (cs % 5) * bits;
+ }
+ brcmnand_rmw_reg(ctrl, reg, (bits - 1) << shift, shift, val);
+}
+
+static inline int brcmnand_cmd_shift(struct brcmnand_controller *ctrl)
+{
+ if (ctrl->nand_version < 0x0700)
+ return 24;
+ return 0;
+}
+
+/***********************************************************************
+ * NAND ACC CONTROL bitfield
+ *
+ * Some bits have remained constant throughout hardware revision, while
+ * others have shifted around.
+ ***********************************************************************/
+
+/* Constant for all versions (where supported) */
+enum {
+ /* See BRCMNAND_HAS_CACHE_MODE */
+ ACC_CONTROL_CACHE_MODE = BIT(22),
+
+ /* See BRCMNAND_HAS_PREFETCH */
+ ACC_CONTROL_PREFETCH = BIT(23),
+
+ ACC_CONTROL_PAGE_HIT = BIT(24),
+ ACC_CONTROL_WR_PREEMPT = BIT(25),
+ ACC_CONTROL_PARTIAL_PAGE = BIT(26),
+ ACC_CONTROL_RD_ERASED = BIT(27),
+ ACC_CONTROL_FAST_PGM_RDIN = BIT(28),
+ ACC_CONTROL_WR_ECC = BIT(30),
+ ACC_CONTROL_RD_ECC = BIT(31),
+};
+
+static inline u32 brcmnand_spare_area_mask(struct brcmnand_controller *ctrl)
+{
+ if (ctrl->nand_version >= 0x0600)
+ return GENMASK(6, 0);
+ else
+ return GENMASK(5, 0);
+}
+
+#define NAND_ACC_CONTROL_ECC_SHIFT 16
+
+static inline u32 brcmnand_ecc_level_mask(struct brcmnand_controller *ctrl)
+{
+ u32 mask = (ctrl->nand_version >= 0x0600) ? 0x1f : 0x0f;
+
+ return mask << NAND_ACC_CONTROL_ECC_SHIFT;
+}
+
+static void brcmnand_set_ecc_enabled(struct brcmnand_host *host, int en)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ u16 offs = brcmnand_cs_offset(ctrl, host->cs, BRCMNAND_CS_ACC_CONTROL);
+ u32 acc_control = nand_readreg(ctrl, offs);
+ u32 ecc_flags = ACC_CONTROL_WR_ECC | ACC_CONTROL_RD_ECC;
+
+ if (en) {
+ acc_control |= ecc_flags; /* enable RD/WR ECC */
+ acc_control |= host->hwcfg.ecc_level
+ << NAND_ACC_CONTROL_ECC_SHIFT;
+ } else {
+ acc_control &= ~ecc_flags; /* disable RD/WR ECC */
+ acc_control &= ~brcmnand_ecc_level_mask(ctrl);
+ }
+
+ nand_writereg(ctrl, offs, acc_control);
+}
+
+static inline int brcmnand_sector_1k_shift(struct brcmnand_controller *ctrl)
+{
+ if (ctrl->nand_version >= 0x0600)
+ return 7;
+ else if (ctrl->nand_version >= 0x0500)
+ return 6;
+ else
+ return -1;
+}
+
+static int brcmnand_get_sector_size_1k(struct brcmnand_host *host)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ int shift = brcmnand_sector_1k_shift(ctrl);
+ u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs,
+ BRCMNAND_CS_ACC_CONTROL);
+
+ if (shift < 0)
+ return 0;
+
+ return (nand_readreg(ctrl, acc_control_offs) >> shift) & 0x1;
+}
+
+static void brcmnand_set_sector_size_1k(struct brcmnand_host *host, int val)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ int shift = brcmnand_sector_1k_shift(ctrl);
+ u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs,
+ BRCMNAND_CS_ACC_CONTROL);
+ u32 tmp;
+
+ if (shift < 0)
+ return;
+
+ tmp = nand_readreg(ctrl, acc_control_offs);
+ tmp &= ~(1 << shift);
+ tmp |= (!!val) << shift;
+ nand_writereg(ctrl, acc_control_offs, tmp);
+}
+
+/***********************************************************************
+ * CS_NAND_SELECT
+ ***********************************************************************/
+
+enum {
+ CS_SELECT_NAND_WP = BIT(29),
+ CS_SELECT_AUTO_DEVICE_ID_CFG = BIT(30),
+};
+
+static inline void brcmnand_set_wp(struct brcmnand_controller *ctrl, bool en)
+{
+ u32 val = en ? CS_SELECT_NAND_WP : 0;
+
+ brcmnand_rmw_reg(ctrl, BRCMNAND_CS_SELECT, CS_SELECT_NAND_WP, 0, val);
+}
+
+/***********************************************************************
+ * Flash DMA
+ ***********************************************************************/
+
+enum flash_dma_reg {
+ FLASH_DMA_REVISION = 0x00,
+ FLASH_DMA_FIRST_DESC = 0x04,
+ FLASH_DMA_FIRST_DESC_EXT = 0x08,
+ FLASH_DMA_CTRL = 0x0c,
+ FLASH_DMA_MODE = 0x10,
+ FLASH_DMA_STATUS = 0x14,
+ FLASH_DMA_INTERRUPT_DESC = 0x18,
+ FLASH_DMA_INTERRUPT_DESC_EXT = 0x1c,
+ FLASH_DMA_ERROR_STATUS = 0x20,
+ FLASH_DMA_CURRENT_DESC = 0x24,
+ FLASH_DMA_CURRENT_DESC_EXT = 0x28,
+};
+
+static inline bool has_flash_dma(struct brcmnand_controller *ctrl)
+{
+ return ctrl->flash_dma_base;
+}
+
+static inline bool flash_dma_buf_ok(const void *buf)
+{
+ return buf && !is_vmalloc_addr(buf) &&
+ likely(IS_ALIGNED((uintptr_t)buf, 4));
+}
+
+static inline void flash_dma_writel(struct brcmnand_controller *ctrl, u8 offs,
+ u32 val)
+{
+ brcmnand_writel(val, ctrl->flash_dma_base + offs);
+}
+
+static inline u32 flash_dma_readl(struct brcmnand_controller *ctrl, u8 offs)
+{
+ return brcmnand_readl(ctrl->flash_dma_base + offs);
+}
+
+/* Low-level operation types: command, address, write, or read */
+enum brcmnand_llop_type {
+ LL_OP_CMD,
+ LL_OP_ADDR,
+ LL_OP_WR,
+ LL_OP_RD,
+};
+
+/***********************************************************************
+ * Internal support functions
+ ***********************************************************************/
+
+static inline bool is_hamming_ecc(struct brcmnand_cfg *cfg)
+{
+ return cfg->sector_size_1k == 0 && cfg->spare_area_size == 16 &&
+ cfg->ecc_level == 15;
+}
+
+/*
+ * Returns a nand_ecclayout strucutre for the given layout/configuration.
+ * Returns NULL on failure.
+ */
+static struct nand_ecclayout *brcmnand_create_layout(int ecc_level,
+ struct brcmnand_host *host)
+{
+ struct brcmnand_cfg *cfg = &host->hwcfg;
+ int i, j;
+ struct nand_ecclayout *layout;
+ int req;
+ int sectors;
+ int sas;
+ int idx1, idx2;
+
+ layout = devm_kzalloc(&host->pdev->dev, sizeof(*layout), GFP_KERNEL);
+ if (!layout)
+ return NULL;
+
+ sectors = cfg->page_size / (512 << cfg->sector_size_1k);
+ sas = cfg->spare_area_size << cfg->sector_size_1k;
+
+ /* Hamming */
+ if (is_hamming_ecc(cfg)) {
+ for (i = 0, idx1 = 0, idx2 = 0; i < sectors; i++) {
+ /* First sector of each page may have BBI */
+ if (i == 0) {
+ layout->oobfree[idx2].offset = i * sas + 1;
+ /* Small-page NAND use byte 6 for BBI */
+ if (cfg->page_size == 512)
+ layout->oobfree[idx2].offset--;
+ layout->oobfree[idx2].length = 5;
+ } else {
+ layout->oobfree[idx2].offset = i * sas;
+ layout->oobfree[idx2].length = 6;
+ }
+ idx2++;
+ layout->eccpos[idx1++] = i * sas + 6;
+ layout->eccpos[idx1++] = i * sas + 7;
+ layout->eccpos[idx1++] = i * sas + 8;
+ layout->oobfree[idx2].offset = i * sas + 9;
+ layout->oobfree[idx2].length = 7;
+ idx2++;
+ /* Leave zero-terminated entry for OOBFREE */
+ if (idx1 >= MTD_MAX_ECCPOS_ENTRIES_LARGE ||
+ idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1)
+ break;
+ }
+ goto out;
+ }
+
+ /*
+ * CONTROLLER_VERSION:
+ * < v5.0: ECC_REQ = ceil(BCH_T * 13/8)
+ * >= v5.0: ECC_REQ = ceil(BCH_T * 14/8)
+ * But we will just be conservative.
+ */
+ req = DIV_ROUND_UP(ecc_level * 14, 8);
+ if (req >= sas) {
+ dev_err(&host->pdev->dev,
+ "error: ECC too large for OOB (ECC bytes %d, spare sector %d)\n",
+ req, sas);
+ return NULL;
+ }
+
+ layout->eccbytes = req * sectors;
+ for (i = 0, idx1 = 0, idx2 = 0; i < sectors; i++) {
+ for (j = sas - req; j < sas && idx1 <
+ MTD_MAX_ECCPOS_ENTRIES_LARGE; j++, idx1++)
+ layout->eccpos[idx1] = i * sas + j;
+
+ /* First sector of each page may have BBI */
+ if (i == 0) {
+ if (cfg->page_size == 512 && (sas - req >= 6)) {
+ /* Small-page NAND use byte 6 for BBI */
+ layout->oobfree[idx2].offset = 0;
+ layout->oobfree[idx2].length = 5;
+ idx2++;
+ if (sas - req > 6) {
+ layout->oobfree[idx2].offset = 6;
+ layout->oobfree[idx2].length =
+ sas - req - 6;
+ idx2++;
+ }
+ } else if (sas > req + 1) {
+ layout->oobfree[idx2].offset = i * sas + 1;
+ layout->oobfree[idx2].length = sas - req - 1;
+ idx2++;
+ }
+ } else if (sas > req) {
+ layout->oobfree[idx2].offset = i * sas;
+ layout->oobfree[idx2].length = sas - req;
+ idx2++;
+ }
+ /* Leave zero-terminated entry for OOBFREE */
+ if (idx1 >= MTD_MAX_ECCPOS_ENTRIES_LARGE ||
+ idx2 >= MTD_MAX_OOBFREE_ENTRIES_LARGE - 1)
+ break;
+ }
+out:
+ /* Sum available OOB */
+ for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES_LARGE; i++)
+ layout->oobavail += layout->oobfree[i].length;
+ return layout;
+}
+
+static struct nand_ecclayout *brcmstb_choose_ecc_layout(
+ struct brcmnand_host *host)
+{
+ struct nand_ecclayout *layout;
+ struct brcmnand_cfg *p = &host->hwcfg;
+ unsigned int ecc_level = p->ecc_level;
+
+ if (p->sector_size_1k)
+ ecc_level <<= 1;
+
+ layout = brcmnand_create_layout(ecc_level, host);
+ if (!layout) {
+ dev_err(&host->pdev->dev,
+ "no proper ecc_layout for this NAND cfg\n");
+ return NULL;
+ }
+
+ return layout;
+}
+
+static void brcmnand_wp(struct mtd_info *mtd, int wp)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct brcmnand_host *host = chip->priv;
+ struct brcmnand_controller *ctrl = host->ctrl;
+
+ if ((ctrl->features & BRCMNAND_HAS_WP) && wp_on == 1) {
+ static int old_wp = -1;
+
+ if (old_wp != wp) {
+ dev_dbg(ctrl->dev, "WP %s\n", wp ? "on" : "off");
+ old_wp = wp;
+ }
+ brcmnand_set_wp(ctrl, wp);
+ }
+}
+
+/* Helper functions for reading and writing OOB registers */
+static inline u8 oob_reg_read(struct brcmnand_controller *ctrl, u32 offs)
+{
+ u16 offset0, offset10, reg_offs;
+
+ offset0 = ctrl->reg_offsets[BRCMNAND_OOB_READ_BASE];
+ offset10 = ctrl->reg_offsets[BRCMNAND_OOB_READ_10_BASE];
+
+ if (offs >= ctrl->max_oob)
+ return 0x77;
+
+ if (offs >= 16 && offset10)
+ reg_offs = offset10 + ((offs - 0x10) & ~0x03);
+ else
+ reg_offs = offset0 + (offs & ~0x03);
+
+ return nand_readreg(ctrl, reg_offs) >> (24 - ((offs & 0x03) << 3));
+}
+
+static inline void oob_reg_write(struct brcmnand_controller *ctrl, u32 offs,
+ u32 data)
+{
+ u16 offset0, offset10, reg_offs;
+
+ offset0 = ctrl->reg_offsets[BRCMNAND_OOB_WRITE_BASE];
+ offset10 = ctrl->reg_offsets[BRCMNAND_OOB_WRITE_10_BASE];
+
+ if (offs >= ctrl->max_oob)
+ return;
+
+ if (offs >= 16 && offset10)
+ reg_offs = offset10 + ((offs - 0x10) & ~0x03);
+ else
+ reg_offs = offset0 + (offs & ~0x03);
+
+ nand_writereg(ctrl, reg_offs, data);
+}
+
+/*
+ * read_oob_from_regs - read data from OOB registers
+ * @ctrl: NAND controller
+ * @i: sub-page sector index
+ * @oob: buffer to read to
+ * @sas: spare area sector size (i.e., OOB size per FLASH_CACHE)
+ * @sector_1k: 1 for 1KiB sectors, 0 for 512B, other values are illegal
+ */
+static int read_oob_from_regs(struct brcmnand_controller *ctrl, int i, u8 *oob,
+ int sas, int sector_1k)
+{
+ int tbytes = sas << sector_1k;
+ int j;
+
+ /* Adjust OOB values for 1K sector size */
+ if (sector_1k && (i & 0x01))
+ tbytes = max(0, tbytes - (int)ctrl->max_oob);
+ tbytes = min_t(int, tbytes, ctrl->max_oob);
+
+ for (j = 0; j < tbytes; j++)
+ oob[j] = oob_reg_read(ctrl, j);
+ return tbytes;
+}
+
+/*
+ * write_oob_to_regs - write data to OOB registers
+ * @i: sub-page sector index
+ * @oob: buffer to write from
+ * @sas: spare area sector size (i.e., OOB size per FLASH_CACHE)
+ * @sector_1k: 1 for 1KiB sectors, 0 for 512B, other values are illegal
+ */
+static int write_oob_to_regs(struct brcmnand_controller *ctrl, int i,
+ const u8 *oob, int sas, int sector_1k)
+{
+ int tbytes = sas << sector_1k;
+ int j;
+
+ /* Adjust OOB values for 1K sector size */
+ if (sector_1k && (i & 0x01))
+ tbytes = max(0, tbytes - (int)ctrl->max_oob);
+ tbytes = min_t(int, tbytes, ctrl->max_oob);
+
+ for (j = 0; j < tbytes; j += 4)
+ oob_reg_write(ctrl, j,
+ (oob[j + 0] << 24) |
+ (oob[j + 1] << 16) |
+ (oob[j + 2] << 8) |
+ (oob[j + 3] << 0));
+ return tbytes;
+}
+
+static irqreturn_t brcmnand_ctlrdy_irq(int irq, void *data)
+{
+ struct brcmnand_controller *ctrl = data;
+
+ /* Discard all NAND_CTLRDY interrupts during DMA */
+ if (ctrl->dma_pending)
+ return IRQ_HANDLED;
+
+ complete(&ctrl->done);
+ return IRQ_HANDLED;
+}
+
+/* Handle SoC-specific interrupt hardware */
+static irqreturn_t brcmnand_irq(int irq, void *data)
+{
+ struct brcmnand_controller *ctrl = data;
+
+ if (ctrl->soc->ctlrdy_ack(ctrl->soc))
+ return brcmnand_ctlrdy_irq(irq, data);
+
+ return IRQ_NONE;
+}
+
+static irqreturn_t brcmnand_dma_irq(int irq, void *data)
+{
+ struct brcmnand_controller *ctrl = data;
+
+ complete(&ctrl->dma_done);
+
+ return IRQ_HANDLED;
+}
+
+static void brcmnand_send_cmd(struct brcmnand_host *host, int cmd)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ u32 intfc;
+
+ dev_dbg(ctrl->dev, "send native cmd %d addr_lo 0x%x\n", cmd,
+ brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS));
+ BUG_ON(ctrl->cmd_pending != 0);
+ ctrl->cmd_pending = cmd;
+
+ intfc = brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS);
+ BUG_ON(!(intfc & INTFC_CTLR_READY));
+
+ mb(); /* flush previous writes */
+ brcmnand_write_reg(ctrl, BRCMNAND_CMD_START,
+ cmd << brcmnand_cmd_shift(ctrl));
+}
+
+/***********************************************************************
+ * NAND MTD API: read/program/erase
+ ***********************************************************************/
+
+static void brcmnand_cmd_ctrl(struct mtd_info *mtd, int dat,
+ unsigned int ctrl)
+{
+ /* intentionally left blank */
+}
+
+static int brcmnand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct brcmnand_host *host = chip->priv;
+ struct brcmnand_controller *ctrl = host->ctrl;
+ unsigned long timeo = msecs_to_jiffies(100);
+
+ dev_dbg(ctrl->dev, "wait on native cmd %d\n", ctrl->cmd_pending);
+ if (ctrl->cmd_pending &&
+ wait_for_completion_timeout(&ctrl->done, timeo) <= 0) {
+ u32 cmd = brcmnand_read_reg(ctrl, BRCMNAND_CMD_START)
+ >> brcmnand_cmd_shift(ctrl);
+
+ dev_err_ratelimited(ctrl->dev,
+ "timeout waiting for command %#02x\n", cmd);
+ dev_err_ratelimited(ctrl->dev, "intfc status %08x\n",
+ brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS));
+ }
+ ctrl->cmd_pending = 0;
+ return brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS) &
+ INTFC_FLASH_STATUS;
+}
+
+enum {
+ LLOP_RE = BIT(16),
+ LLOP_WE = BIT(17),
+ LLOP_ALE = BIT(18),
+ LLOP_CLE = BIT(19),
+ LLOP_RETURN_IDLE = BIT(31),
+
+ LLOP_DATA_MASK = GENMASK(15, 0),
+};
+
+static int brcmnand_low_level_op(struct brcmnand_host *host,
+ enum brcmnand_llop_type type, u32 data,
+ bool last_op)
+{
+ struct mtd_info *mtd = &host->mtd;
+ struct nand_chip *chip = &host->chip;
+ struct brcmnand_controller *ctrl = host->ctrl;
+ u32 tmp;
+
+ tmp = data & LLOP_DATA_MASK;
+ switch (type) {
+ case LL_OP_CMD:
+ tmp |= LLOP_WE | LLOP_CLE;
+ break;
+ case LL_OP_ADDR:
+ /* WE | ALE */
+ tmp |= LLOP_WE | LLOP_ALE;
+ break;
+ case LL_OP_WR:
+ /* WE */
+ tmp |= LLOP_WE;
+ break;
+ case LL_OP_RD:
+ /* RE */
+ tmp |= LLOP_RE;
+ break;
+ }
+ if (last_op)
+ /* RETURN_IDLE */
+ tmp |= LLOP_RETURN_IDLE;
+
+ dev_dbg(ctrl->dev, "ll_op cmd %#x\n", tmp);
+
+ brcmnand_write_reg(ctrl, BRCMNAND_LL_OP, tmp);
+ (void)brcmnand_read_reg(ctrl, BRCMNAND_LL_OP);
+
+ brcmnand_send_cmd(host, CMD_LOW_LEVEL_OP);
+ return brcmnand_waitfunc(mtd, chip);
+}
+
+static void brcmnand_cmdfunc(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct brcmnand_host *host = chip->priv;
+ struct brcmnand_controller *ctrl = host->ctrl;
+ u64 addr = (u64)page_addr << chip->page_shift;
+ int native_cmd = 0;
+
+ if (command == NAND_CMD_READID || command == NAND_CMD_PARAM ||
+ command == NAND_CMD_RNDOUT)
+ addr = (u64)column;
+ /* Avoid propagating a negative, don't-care address */
+ else if (page_addr < 0)
+ addr = 0;
+
+ dev_dbg(ctrl->dev, "cmd 0x%x addr 0x%llx\n", command,
+ (unsigned long long)addr);
+
+ host->last_cmd = command;
+ host->last_byte = 0;
+ host->last_addr = addr;
+
+ switch (command) {
+ case NAND_CMD_RESET:
+ native_cmd = CMD_FLASH_RESET;
+ break;
+ case NAND_CMD_STATUS:
+ native_cmd = CMD_STATUS_READ;
+ break;
+ case NAND_CMD_READID:
+ native_cmd = CMD_DEVICE_ID_READ;
+ break;
+ case NAND_CMD_READOOB:
+ native_cmd = CMD_SPARE_AREA_READ;
+ break;
+ case NAND_CMD_ERASE1:
+ native_cmd = CMD_BLOCK_ERASE;
+ brcmnand_wp(mtd, 0);
+ break;
+ case NAND_CMD_PARAM:
+ native_cmd = CMD_PARAMETER_READ;
+ break;
+ case NAND_CMD_SET_FEATURES:
+ case NAND_CMD_GET_FEATURES:
+ brcmnand_low_level_op(host, LL_OP_CMD, command, false);
+ brcmnand_low_level_op(host, LL_OP_ADDR, column, false);
+ break;
+ case NAND_CMD_RNDOUT:
+ native_cmd = CMD_PARAMETER_CHANGE_COL;
+ addr &= ~((u64)(FC_BYTES - 1));
+ /*
+ * HW quirk: PARAMETER_CHANGE_COL requires SECTOR_SIZE_1K=0
+ * NB: hwcfg.sector_size_1k may not be initialized yet
+ */
+ if (brcmnand_get_sector_size_1k(host)) {
+ host->hwcfg.sector_size_1k =
+ brcmnand_get_sector_size_1k(host);
+ brcmnand_set_sector_size_1k(host, 0);
+ }
+ break;
+ }
+
+ if (!native_cmd)
+ return;
+
+ brcmnand_write_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS,
+ (host->cs << 16) | ((addr >> 32) & 0xffff));
+ (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS);
+ brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS, lower_32_bits(addr));
+ (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS);
+
+ brcmnand_send_cmd(host, native_cmd);
+ brcmnand_waitfunc(mtd, chip);
+
+ if (native_cmd == CMD_PARAMETER_READ ||
+ native_cmd == CMD_PARAMETER_CHANGE_COL) {
+ int i;
+
+ brcmnand_soc_data_bus_prepare(ctrl->soc);
+
+ /*
+ * Must cache the FLASH_CACHE now, since changes in
+ * SECTOR_SIZE_1K may invalidate it
+ */
+ for (i = 0; i < FC_WORDS; i++)
+ ctrl->flash_cache[i] = brcmnand_read_fc(ctrl, i);
+
+ brcmnand_soc_data_bus_unprepare(ctrl->soc);
+
+ /* Cleanup from HW quirk: restore SECTOR_SIZE_1K */
+ if (host->hwcfg.sector_size_1k)
+ brcmnand_set_sector_size_1k(host,
+ host->hwcfg.sector_size_1k);
+ }
+
+ /* Re-enable protection is necessary only after erase */
+ if (command == NAND_CMD_ERASE1)
+ brcmnand_wp(mtd, 1);
+}
+
+static uint8_t brcmnand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct brcmnand_host *host = chip->priv;
+ struct brcmnand_controller *ctrl = host->ctrl;
+ uint8_t ret = 0;
+ int addr, offs;
+
+ switch (host->last_cmd) {
+ case NAND_CMD_READID:
+ if (host->last_byte < 4)
+ ret = brcmnand_read_reg(ctrl, BRCMNAND_ID) >>
+ (24 - (host->last_byte << 3));
+ else if (host->last_byte < 8)
+ ret = brcmnand_read_reg(ctrl, BRCMNAND_ID_EXT) >>
+ (56 - (host->last_byte << 3));
+ break;
+
+ case NAND_CMD_READOOB:
+ ret = oob_reg_read(ctrl, host->last_byte);
+ break;
+
+ case NAND_CMD_STATUS:
+ ret = brcmnand_read_reg(ctrl, BRCMNAND_INTFC_STATUS) &
+ INTFC_FLASH_STATUS;
+ if (wp_on) /* hide WP status */
+ ret |= NAND_STATUS_WP;
+ break;
+
+ case NAND_CMD_PARAM:
+ case NAND_CMD_RNDOUT:
+ addr = host->last_addr + host->last_byte;
+ offs = addr & (FC_BYTES - 1);
+
+ /* At FC_BYTES boundary, switch to next column */
+ if (host->last_byte > 0 && offs == 0)
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, addr, -1);
+
+ ret = ctrl->flash_cache[offs >> 2] >>
+ (24 - ((offs & 0x03) << 3));
+ break;
+ case NAND_CMD_GET_FEATURES:
+ if (host->last_byte >= ONFI_SUBFEATURE_PARAM_LEN) {
+ ret = 0;
+ } else {
+ bool last = host->last_byte ==
+ ONFI_SUBFEATURE_PARAM_LEN - 1;
+ brcmnand_low_level_op(host, LL_OP_RD, 0, last);
+ ret = brcmnand_read_reg(ctrl, BRCMNAND_LL_RDATA) & 0xff;
+ }
+ }
+
+ dev_dbg(ctrl->dev, "read byte = 0x%02x\n", ret);
+ host->last_byte++;
+
+ return ret;
+}
+
+static void brcmnand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++, buf++)
+ *buf = brcmnand_read_byte(mtd);
+}
+
+static void brcmnand_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+ int len)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+ struct brcmnand_host *host = chip->priv;
+
+ switch (host->last_cmd) {
+ case NAND_CMD_SET_FEATURES:
+ for (i = 0; i < len; i++)
+ brcmnand_low_level_op(host, LL_OP_WR, buf[i],
+ (i + 1) == len);
+ break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+/**
+ * Construct a FLASH_DMA descriptor as part of a linked list. You must know the
+ * following ahead of time:
+ * - Is this descriptor the beginning or end of a linked list?
+ * - What is the (DMA) address of the next descriptor in the linked list?
+ */
+static int brcmnand_fill_dma_desc(struct brcmnand_host *host,
+ struct brcm_nand_dma_desc *desc, u64 addr,
+ dma_addr_t buf, u32 len, u8 dma_cmd,
+ bool begin, bool end,
+ dma_addr_t next_desc)
+{
+ memset(desc, 0, sizeof(*desc));
+ /* Descriptors are written in native byte order (wordwise) */
+ desc->next_desc = lower_32_bits(next_desc);
+ desc->next_desc_ext = upper_32_bits(next_desc);
+ desc->cmd_irq = (dma_cmd << 24) |
+ (end ? (0x03 << 8) : 0) | /* IRQ | STOP */
+ (!!begin) | ((!!end) << 1); /* head, tail */
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ desc->cmd_irq |= 0x01 << 12;
+#endif
+ desc->dram_addr = lower_32_bits(buf);
+ desc->dram_addr_ext = upper_32_bits(buf);
+ desc->tfr_len = len;
+ desc->total_len = len;
+ desc->flash_addr = lower_32_bits(addr);
+ desc->flash_addr_ext = upper_32_bits(addr);
+ desc->cs = host->cs;
+ desc->status_valid = 0x01;
+ return 0;
+}
+
+/**
+ * Kick the FLASH_DMA engine, with a given DMA descriptor
+ */
+static void brcmnand_dma_run(struct brcmnand_host *host, dma_addr_t desc)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ unsigned long timeo = msecs_to_jiffies(100);
+
+ flash_dma_writel(ctrl, FLASH_DMA_FIRST_DESC, lower_32_bits(desc));
+ (void)flash_dma_readl(ctrl, FLASH_DMA_FIRST_DESC);
+ flash_dma_writel(ctrl, FLASH_DMA_FIRST_DESC_EXT, upper_32_bits(desc));
+ (void)flash_dma_readl(ctrl, FLASH_DMA_FIRST_DESC_EXT);
+
+ /* Start FLASH_DMA engine */
+ ctrl->dma_pending = true;
+ mb(); /* flush previous writes */
+ flash_dma_writel(ctrl, FLASH_DMA_CTRL, 0x03); /* wake | run */
+
+ if (wait_for_completion_timeout(&ctrl->dma_done, timeo) <= 0) {
+ dev_err(ctrl->dev,
+ "timeout waiting for DMA; status %#x, error status %#x\n",
+ flash_dma_readl(ctrl, FLASH_DMA_STATUS),
+ flash_dma_readl(ctrl, FLASH_DMA_ERROR_STATUS));
+ }
+ ctrl->dma_pending = false;
+ flash_dma_writel(ctrl, FLASH_DMA_CTRL, 0); /* force stop */
+}
+
+static int brcmnand_dma_trans(struct brcmnand_host *host, u64 addr, u32 *buf,
+ u32 len, u8 dma_cmd)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ dma_addr_t buf_pa;
+ int dir = dma_cmd == CMD_PAGE_READ ? DMA_FROM_DEVICE : DMA_TO_DEVICE;
+
+ buf_pa = dma_map_single(ctrl->dev, buf, len, dir);
+ if (dma_mapping_error(ctrl->dev, buf_pa)) {
+ dev_err(ctrl->dev, "unable to map buffer for DMA\n");
+ return -ENOMEM;
+ }
+
+ brcmnand_fill_dma_desc(host, ctrl->dma_desc, addr, buf_pa, len,
+ dma_cmd, true, true, 0);
+
+ brcmnand_dma_run(host, ctrl->dma_pa);
+
+ dma_unmap_single(ctrl->dev, buf_pa, len, dir);
+
+ if (ctrl->dma_desc->status_valid & FLASH_DMA_ECC_ERROR)
+ return -EBADMSG;
+ else if (ctrl->dma_desc->status_valid & FLASH_DMA_CORR_ERROR)
+ return -EUCLEAN;
+
+ return 0;
+}
+
+/*
+ * Assumes proper CS is already set
+ */
+static int brcmnand_read_by_pio(struct mtd_info *mtd, struct nand_chip *chip,
+ u64 addr, unsigned int trans, u32 *buf,
+ u8 *oob, u64 *err_addr)
+{
+ struct brcmnand_host *host = chip->priv;
+ struct brcmnand_controller *ctrl = host->ctrl;
+ int i, j, ret = 0;
+
+ /* Clear error addresses */
+ brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_ADDR, 0);
+ brcmnand_write_reg(ctrl, BRCMNAND_CORR_ADDR, 0);
+
+ brcmnand_write_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS,
+ (host->cs << 16) | ((addr >> 32) & 0xffff));
+ (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS);
+
+ for (i = 0; i < trans; i++, addr += FC_BYTES) {
+ brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS,
+ lower_32_bits(addr));
+ (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS);
+ /* SPARE_AREA_READ does not use ECC, so just use PAGE_READ */
+ brcmnand_send_cmd(host, CMD_PAGE_READ);
+ brcmnand_waitfunc(mtd, chip);
+
+ if (likely(buf)) {
+ brcmnand_soc_data_bus_prepare(ctrl->soc);
+
+ for (j = 0; j < FC_WORDS; j++, buf++)
+ *buf = brcmnand_read_fc(ctrl, j);
+
+ brcmnand_soc_data_bus_unprepare(ctrl->soc);
+ }
+
+ if (oob)
+ oob += read_oob_from_regs(ctrl, i, oob,
+ mtd->oobsize / trans,
+ host->hwcfg.sector_size_1k);
+
+ if (!ret) {
+ *err_addr = brcmnand_read_reg(ctrl,
+ BRCMNAND_UNCORR_ADDR) |
+ ((u64)(brcmnand_read_reg(ctrl,
+ BRCMNAND_UNCORR_EXT_ADDR)
+ & 0xffff) << 32);
+ if (*err_addr)
+ ret = -EBADMSG;
+ }
+
+ if (!ret) {
+ *err_addr = brcmnand_read_reg(ctrl,
+ BRCMNAND_CORR_ADDR) |
+ ((u64)(brcmnand_read_reg(ctrl,
+ BRCMNAND_CORR_EXT_ADDR)
+ & 0xffff) << 32);
+ if (*err_addr)
+ ret = -EUCLEAN;
+ }
+ }
+
+ return ret;
+}
+
+static int brcmnand_read(struct mtd_info *mtd, struct nand_chip *chip,
+ u64 addr, unsigned int trans, u32 *buf, u8 *oob)
+{
+ struct brcmnand_host *host = chip->priv;
+ struct brcmnand_controller *ctrl = host->ctrl;
+ u64 err_addr = 0;
+ int err;
+
+ dev_dbg(ctrl->dev, "read %llx -> %p\n", (unsigned long long)addr, buf);
+
+ brcmnand_write_reg(ctrl, BRCMNAND_UNCORR_COUNT, 0);
+
+ if (has_flash_dma(ctrl) && !oob && flash_dma_buf_ok(buf)) {
+ err = brcmnand_dma_trans(host, addr, buf, trans * FC_BYTES,
+ CMD_PAGE_READ);
+ if (err) {
+ if (mtd_is_bitflip_or_eccerr(err))
+ err_addr = addr;
+ else
+ return -EIO;
+ }
+ } else {
+ if (oob)
+ memset(oob, 0x99, mtd->oobsize);
+
+ err = brcmnand_read_by_pio(mtd, chip, addr, trans, buf,
+ oob, &err_addr);
+ }
+
+ if (mtd_is_eccerr(err)) {
+ dev_dbg(ctrl->dev, "uncorrectable error at 0x%llx\n",
+ (unsigned long long)err_addr);
+ mtd->ecc_stats.failed++;
+ /* NAND layer expects zero on ECC errors */
+ return 0;
+ }
+
+ if (mtd_is_bitflip(err)) {
+ unsigned int corrected = brcmnand_count_corrected(ctrl);
+
+ dev_dbg(ctrl->dev, "corrected error at 0x%llx\n",
+ (unsigned long long)err_addr);
+ mtd->ecc_stats.corrected += corrected;
+ /* Always exceed the software-imposed threshold */
+ return max(mtd->bitflip_threshold, corrected);
+ }
+
+ return 0;
+}
+
+static int brcmnand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct brcmnand_host *host = chip->priv;
+ u8 *oob = oob_required ? (u8 *)chip->oob_poi : NULL;
+
+ return brcmnand_read(mtd, chip, host->last_addr,
+ mtd->writesize >> FC_SHIFT, (u32 *)buf, oob);
+}
+
+static int brcmnand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct brcmnand_host *host = chip->priv;
+ u8 *oob = oob_required ? (u8 *)chip->oob_poi : NULL;
+ int ret;
+
+ brcmnand_set_ecc_enabled(host, 0);
+ ret = brcmnand_read(mtd, chip, host->last_addr,
+ mtd->writesize >> FC_SHIFT, (u32 *)buf, oob);
+ brcmnand_set_ecc_enabled(host, 1);
+ return ret;
+}
+
+static int brcmnand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ return brcmnand_read(mtd, chip, (u64)page << chip->page_shift,
+ mtd->writesize >> FC_SHIFT,
+ NULL, (u8 *)chip->oob_poi);
+}
+
+static int brcmnand_read_oob_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct brcmnand_host *host = chip->priv;
+
+ brcmnand_set_ecc_enabled(host, 0);
+ brcmnand_read(mtd, chip, (u64)page << chip->page_shift,
+ mtd->writesize >> FC_SHIFT,
+ NULL, (u8 *)chip->oob_poi);
+ brcmnand_set_ecc_enabled(host, 1);
+ return 0;
+}
+
+static int brcmnand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t data_offs, uint32_t readlen,
+ uint8_t *bufpoi, int page)
+{
+ struct brcmnand_host *host = chip->priv;
+
+ return brcmnand_read(mtd, chip, host->last_addr + data_offs,
+ readlen >> FC_SHIFT, (u32 *)bufpoi, NULL);
+}
+
+static int brcmnand_write(struct mtd_info *mtd, struct nand_chip *chip,
+ u64 addr, const u32 *buf, u8 *oob)
+{
+ struct brcmnand_host *host = chip->priv;
+ struct brcmnand_controller *ctrl = host->ctrl;
+ unsigned int i, j, trans = mtd->writesize >> FC_SHIFT;
+ int status, ret = 0;
+
+ dev_dbg(ctrl->dev, "write %llx <- %p\n", (unsigned long long)addr, buf);
+
+ if (unlikely((unsigned long)buf & 0x03)) {
+ dev_warn(ctrl->dev, "unaligned buffer: %p\n", buf);
+ buf = (u32 *)((unsigned long)buf & ~0x03);
+ }
+
+ brcmnand_wp(mtd, 0);
+
+ for (i = 0; i < ctrl->max_oob; i += 4)
+ oob_reg_write(ctrl, i, 0xffffffff);
+
+ if (has_flash_dma(ctrl) && !oob && flash_dma_buf_ok(buf)) {
+ if (brcmnand_dma_trans(host, addr, (u32 *)buf,
+ mtd->writesize, CMD_PROGRAM_PAGE))
+ ret = -EIO;
+ goto out;
+ }
+
+ brcmnand_write_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS,
+ (host->cs << 16) | ((addr >> 32) & 0xffff));
+ (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_EXT_ADDRESS);
+
+ for (i = 0; i < trans; i++, addr += FC_BYTES) {
+ /* full address MUST be set before populating FC */
+ brcmnand_write_reg(ctrl, BRCMNAND_CMD_ADDRESS,
+ lower_32_bits(addr));
+ (void)brcmnand_read_reg(ctrl, BRCMNAND_CMD_ADDRESS);
+
+ if (buf) {
+ brcmnand_soc_data_bus_prepare(ctrl->soc);
+
+ for (j = 0; j < FC_WORDS; j++, buf++)
+ brcmnand_write_fc(ctrl, j, *buf);
+
+ brcmnand_soc_data_bus_unprepare(ctrl->soc);
+ } else if (oob) {
+ for (j = 0; j < FC_WORDS; j++)
+ brcmnand_write_fc(ctrl, j, 0xffffffff);
+ }
+
+ if (oob) {
+ oob += write_oob_to_regs(ctrl, i, oob,
+ mtd->oobsize / trans,
+ host->hwcfg.sector_size_1k);
+ }
+
+ /* we cannot use SPARE_AREA_PROGRAM when PARTIAL_PAGE_EN=0 */
+ brcmnand_send_cmd(host, CMD_PROGRAM_PAGE);
+ status = brcmnand_waitfunc(mtd, chip);
+
+ if (status & NAND_STATUS_FAIL) {
+ dev_info(ctrl->dev, "program failed at %llx\n",
+ (unsigned long long)addr);
+ ret = -EIO;
+ goto out;
+ }
+ }
+out:
+ brcmnand_wp(mtd, 1);
+ return ret;
+}
+
+static int brcmnand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
+{
+ struct brcmnand_host *host = chip->priv;
+ void *oob = oob_required ? chip->oob_poi : NULL;
+
+ brcmnand_write(mtd, chip, host->last_addr, (const u32 *)buf, oob);
+ return 0;
+}
+
+static int brcmnand_write_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf,
+ int oob_required, int page)
+{
+ struct brcmnand_host *host = chip->priv;
+ void *oob = oob_required ? chip->oob_poi : NULL;
+
+ brcmnand_set_ecc_enabled(host, 0);
+ brcmnand_write(mtd, chip, host->last_addr, (const u32 *)buf, oob);
+ brcmnand_set_ecc_enabled(host, 1);
+ return 0;
+}
+
+static int brcmnand_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ return brcmnand_write(mtd, chip, (u64)page << chip->page_shift,
+ NULL, chip->oob_poi);
+}
+
+static int brcmnand_write_oob_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct brcmnand_host *host = chip->priv;
+ int ret;
+
+ brcmnand_set_ecc_enabled(host, 0);
+ ret = brcmnand_write(mtd, chip, (u64)page << chip->page_shift, NULL,
+ (u8 *)chip->oob_poi);
+ brcmnand_set_ecc_enabled(host, 1);
+
+ return ret;
+}
+
+/***********************************************************************
+ * Per-CS setup (1 NAND device)
+ ***********************************************************************/
+
+static int brcmnand_set_cfg(struct brcmnand_host *host,
+ struct brcmnand_cfg *cfg)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ struct nand_chip *chip = &host->chip;
+ u16 cfg_offs = brcmnand_cs_offset(ctrl, host->cs, BRCMNAND_CS_CFG);
+ u16 cfg_ext_offs = brcmnand_cs_offset(ctrl, host->cs,
+ BRCMNAND_CS_CFG_EXT);
+ u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs,
+ BRCMNAND_CS_ACC_CONTROL);
+ u8 block_size = 0, page_size = 0, device_size = 0;
+ u32 tmp;
+
+ if (ctrl->block_sizes) {
+ int i, found;
+
+ for (i = 0, found = 0; ctrl->block_sizes[i]; i++)
+ if (ctrl->block_sizes[i] * 1024 == cfg->block_size) {
+ block_size = i;
+ found = 1;
+ }
+ if (!found) {
+ dev_warn(ctrl->dev, "invalid block size %u\n",
+ cfg->block_size);
+ return -EINVAL;
+ }
+ } else {
+ block_size = ffs(cfg->block_size) - ffs(BRCMNAND_MIN_BLOCKSIZE);
+ }
+
+ if (cfg->block_size < BRCMNAND_MIN_BLOCKSIZE || (ctrl->max_block_size &&
+ cfg->block_size > ctrl->max_block_size)) {
+ dev_warn(ctrl->dev, "invalid block size %u\n",
+ cfg->block_size);
+ block_size = 0;
+ }
+
+ if (ctrl->page_sizes) {
+ int i, found;
+
+ for (i = 0, found = 0; ctrl->page_sizes[i]; i++)
+ if (ctrl->page_sizes[i] == cfg->page_size) {
+ page_size = i;
+ found = 1;
+ }
+ if (!found) {
+ dev_warn(ctrl->dev, "invalid page size %u\n",
+ cfg->page_size);
+ return -EINVAL;
+ }
+ } else {
+ page_size = ffs(cfg->page_size) - ffs(BRCMNAND_MIN_PAGESIZE);
+ }
+
+ if (cfg->page_size < BRCMNAND_MIN_PAGESIZE || (ctrl->max_page_size &&
+ cfg->page_size > ctrl->max_page_size)) {
+ dev_warn(ctrl->dev, "invalid page size %u\n", cfg->page_size);
+ return -EINVAL;
+ }
+
+ if (fls64(cfg->device_size) < fls64(BRCMNAND_MIN_DEVSIZE)) {
+ dev_warn(ctrl->dev, "invalid device size 0x%llx\n",
+ (unsigned long long)cfg->device_size);
+ return -EINVAL;
+ }
+ device_size = fls64(cfg->device_size) - fls64(BRCMNAND_MIN_DEVSIZE);
+
+ tmp = (cfg->blk_adr_bytes << CFG_BLK_ADR_BYTES_SHIFT) |
+ (cfg->col_adr_bytes << CFG_COL_ADR_BYTES_SHIFT) |
+ (cfg->ful_adr_bytes << CFG_FUL_ADR_BYTES_SHIFT) |
+ (!!(cfg->device_width == 16) << CFG_BUS_WIDTH_SHIFT) |
+ (device_size << CFG_DEVICE_SIZE_SHIFT);
+ if (cfg_offs == cfg_ext_offs) {
+ tmp |= (page_size << CFG_PAGE_SIZE_SHIFT) |
+ (block_size << CFG_BLK_SIZE_SHIFT);
+ nand_writereg(ctrl, cfg_offs, tmp);
+ } else {
+ nand_writereg(ctrl, cfg_offs, tmp);
+ tmp = (page_size << CFG_EXT_PAGE_SIZE_SHIFT) |
+ (block_size << CFG_EXT_BLK_SIZE_SHIFT);
+ nand_writereg(ctrl, cfg_ext_offs, tmp);
+ }
+
+ tmp = nand_readreg(ctrl, acc_control_offs);
+ tmp &= ~brcmnand_ecc_level_mask(ctrl);
+ tmp |= cfg->ecc_level << NAND_ACC_CONTROL_ECC_SHIFT;
+ tmp &= ~brcmnand_spare_area_mask(ctrl);
+ tmp |= cfg->spare_area_size;
+ nand_writereg(ctrl, acc_control_offs, tmp);
+
+ brcmnand_set_sector_size_1k(host, cfg->sector_size_1k);
+
+ /* threshold = ceil(BCH-level * 0.75) */
+ brcmnand_wr_corr_thresh(host, DIV_ROUND_UP(chip->ecc.strength * 3, 4));
+
+ return 0;
+}
+
+static void brcmnand_print_cfg(char *buf, struct brcmnand_cfg *cfg)
+{
+ buf += sprintf(buf,
+ "%lluMiB total, %uKiB blocks, %u%s pages, %uB OOB, %u-bit",
+ (unsigned long long)cfg->device_size >> 20,
+ cfg->block_size >> 10,
+ cfg->page_size >= 1024 ? cfg->page_size >> 10 : cfg->page_size,
+ cfg->page_size >= 1024 ? "KiB" : "B",
+ cfg->spare_area_size, cfg->device_width);
+
+ /* Account for Hamming ECC and for BCH 512B vs 1KiB sectors */
+ if (is_hamming_ecc(cfg))
+ sprintf(buf, ", Hamming ECC");
+ else if (cfg->sector_size_1k)
+ sprintf(buf, ", BCH-%u (1KiB sector)", cfg->ecc_level << 1);
+ else
+ sprintf(buf, ", BCH-%u", cfg->ecc_level);
+}
+
+/*
+ * Minimum number of bytes to address a page. Calculated as:
+ * roundup(log2(size / page-size) / 8)
+ *
+ * NB: the following does not "round up" for non-power-of-2 'size'; but this is
+ * OK because many other things will break if 'size' is irregular...
+ */
+static inline int get_blk_adr_bytes(u64 size, u32 writesize)
+{
+ return ALIGN(ilog2(size) - ilog2(writesize), 8) >> 3;
+}
+
+static int brcmnand_setup_dev(struct brcmnand_host *host)
+{
+ struct mtd_info *mtd = &host->mtd;
+ struct nand_chip *chip = &host->chip;
+ struct brcmnand_controller *ctrl = host->ctrl;
+ struct brcmnand_cfg *cfg = &host->hwcfg;
+ char msg[128];
+ u32 offs, tmp, oob_sector;
+ int ret;
+
+ memset(cfg, 0, sizeof(*cfg));
+
+ ret = of_property_read_u32(chip->flash_node,
+ "brcm,nand-oob-sector-size",
+ &oob_sector);
+ if (ret) {
+ /* Use detected size */
+ cfg->spare_area_size = mtd->oobsize /
+ (mtd->writesize >> FC_SHIFT);
+ } else {
+ cfg->spare_area_size = oob_sector;
+ }
+ if (cfg->spare_area_size > ctrl->max_oob)
+ cfg->spare_area_size = ctrl->max_oob;
+ /*
+ * Set oobsize to be consistent with controller's spare_area_size, as
+ * the rest is inaccessible.
+ */
+ mtd->oobsize = cfg->spare_area_size * (mtd->writesize >> FC_SHIFT);
+
+ cfg->device_size = mtd->size;
+ cfg->block_size = mtd->erasesize;
+ cfg->page_size = mtd->writesize;
+ cfg->device_width = (chip->options & NAND_BUSWIDTH_16) ? 16 : 8;
+ cfg->col_adr_bytes = 2;
+ cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize);
+
+ switch (chip->ecc.size) {
+ case 512:
+ if (chip->ecc.strength == 1) /* Hamming */
+ cfg->ecc_level = 15;
+ else
+ cfg->ecc_level = chip->ecc.strength;
+ cfg->sector_size_1k = 0;
+ break;
+ case 1024:
+ if (!(ctrl->features & BRCMNAND_HAS_1K_SECTORS)) {
+ dev_err(ctrl->dev, "1KB sectors not supported\n");
+ return -EINVAL;
+ }
+ if (chip->ecc.strength & 0x1) {
+ dev_err(ctrl->dev,
+ "odd ECC not supported with 1KB sectors\n");
+ return -EINVAL;
+ }
+
+ cfg->ecc_level = chip->ecc.strength >> 1;
+ cfg->sector_size_1k = 1;
+ break;
+ default:
+ dev_err(ctrl->dev, "unsupported ECC size: %d\n",
+ chip->ecc.size);
+ return -EINVAL;
+ }
+
+ cfg->ful_adr_bytes = cfg->blk_adr_bytes;
+ if (mtd->writesize > 512)
+ cfg->ful_adr_bytes += cfg->col_adr_bytes;
+ else
+ cfg->ful_adr_bytes += 1;
+
+ ret = brcmnand_set_cfg(host, cfg);
+ if (ret)
+ return ret;
+
+ brcmnand_set_ecc_enabled(host, 1);
+
+ brcmnand_print_cfg(msg, cfg);
+ dev_info(ctrl->dev, "detected %s\n", msg);
+
+ /* Configure ACC_CONTROL */
+ offs = brcmnand_cs_offset(ctrl, host->cs, BRCMNAND_CS_ACC_CONTROL);
+ tmp = nand_readreg(ctrl, offs);
+ tmp &= ~ACC_CONTROL_PARTIAL_PAGE;
+ tmp &= ~ACC_CONTROL_RD_ERASED;
+ tmp &= ~ACC_CONTROL_FAST_PGM_RDIN;
+ if (ctrl->features & BRCMNAND_HAS_PREFETCH) {
+ /*
+ * FIXME: Flash DMA + prefetch may see spurious erased-page ECC
+ * errors
+ */
+ if (has_flash_dma(ctrl))
+ tmp &= ~ACC_CONTROL_PREFETCH;
+ else
+ tmp |= ACC_CONTROL_PREFETCH;
+ }
+ nand_writereg(ctrl, offs, tmp);
+
+ return 0;
+}
+
+static int brcmnand_init_cs(struct brcmnand_host *host)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ struct device_node *dn = host->of_node;
+ struct platform_device *pdev = host->pdev;
+ struct mtd_info *mtd;
+ struct nand_chip *chip;
+ int ret;
+ u16 cfg_offs;
+ struct mtd_part_parser_data ppdata = { .of_node = dn };
+
+ ret = of_property_read_u32(dn, "reg", &host->cs);
+ if (ret) {
+ dev_err(&pdev->dev, "can't get chip-select\n");
+ return -ENXIO;
+ }
+
+ mtd = &host->mtd;
+ chip = &host->chip;
+
+ chip->flash_node = dn;
+ chip->priv = host;
+ mtd->priv = chip;
+ mtd->name = devm_kasprintf(&pdev->dev, GFP_KERNEL, "brcmnand.%d",
+ host->cs);
+ mtd->owner = THIS_MODULE;
+ mtd->dev.parent = &pdev->dev;
+
+ chip->IO_ADDR_R = (void __iomem *)0xdeadbeef;
+ chip->IO_ADDR_W = (void __iomem *)0xdeadbeef;
+
+ chip->cmd_ctrl = brcmnand_cmd_ctrl;
+ chip->cmdfunc = brcmnand_cmdfunc;
+ chip->waitfunc = brcmnand_waitfunc;
+ chip->read_byte = brcmnand_read_byte;
+ chip->read_buf = brcmnand_read_buf;
+ chip->write_buf = brcmnand_write_buf;
+
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.read_page = brcmnand_read_page;
+ chip->ecc.read_subpage = brcmnand_read_subpage;
+ chip->ecc.write_page = brcmnand_write_page;
+ chip->ecc.read_page_raw = brcmnand_read_page_raw;
+ chip->ecc.write_page_raw = brcmnand_write_page_raw;
+ chip->ecc.write_oob_raw = brcmnand_write_oob_raw;
+ chip->ecc.read_oob_raw = brcmnand_read_oob_raw;
+ chip->ecc.read_oob = brcmnand_read_oob;
+ chip->ecc.write_oob = brcmnand_write_oob;
+
+ chip->controller = &ctrl->controller;
+
+ /*
+ * The bootloader might have configured 16bit mode but
+ * NAND READID command only works in 8bit mode. We force
+ * 8bit mode here to ensure that NAND READID commands works.
+ */
+ cfg_offs = brcmnand_cs_offset(ctrl, host->cs, BRCMNAND_CS_CFG);
+ nand_writereg(ctrl, cfg_offs,
+ nand_readreg(ctrl, cfg_offs) & ~CFG_BUS_WIDTH);
+
+ if (nand_scan_ident(mtd, 1, NULL))
+ return -ENXIO;
+
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+ /*
+ * Avoid (for instance) kmap()'d buffers from JFFS2, which we can't DMA
+ * to/from, and have nand_base pass us a bounce buffer instead, as
+ * needed.
+ */
+ chip->options |= NAND_USE_BOUNCE_BUFFER;
+
+ if (of_get_nand_on_flash_bbt(dn))
+ chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+
+ if (brcmnand_setup_dev(host))
+ return -ENXIO;
+
+ chip->ecc.size = host->hwcfg.sector_size_1k ? 1024 : 512;
+ /* only use our internal HW threshold */
+ mtd->bitflip_threshold = 1;
+
+ chip->ecc.layout = brcmstb_choose_ecc_layout(host);
+ if (!chip->ecc.layout)
+ return -ENXIO;
+
+ if (nand_scan_tail(mtd))
+ return -ENXIO;
+
+ return mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+}
+
+static void brcmnand_save_restore_cs_config(struct brcmnand_host *host,
+ int restore)
+{
+ struct brcmnand_controller *ctrl = host->ctrl;
+ u16 cfg_offs = brcmnand_cs_offset(ctrl, host->cs, BRCMNAND_CS_CFG);
+ u16 cfg_ext_offs = brcmnand_cs_offset(ctrl, host->cs,
+ BRCMNAND_CS_CFG_EXT);
+ u16 acc_control_offs = brcmnand_cs_offset(ctrl, host->cs,
+ BRCMNAND_CS_ACC_CONTROL);
+ u16 t1_offs = brcmnand_cs_offset(ctrl, host->cs, BRCMNAND_CS_TIMING1);
+ u16 t2_offs = brcmnand_cs_offset(ctrl, host->cs, BRCMNAND_CS_TIMING2);
+
+ if (restore) {
+ nand_writereg(ctrl, cfg_offs, host->hwcfg.config);
+ if (cfg_offs != cfg_ext_offs)
+ nand_writereg(ctrl, cfg_ext_offs,
+ host->hwcfg.config_ext);
+ nand_writereg(ctrl, acc_control_offs, host->hwcfg.acc_control);
+ nand_writereg(ctrl, t1_offs, host->hwcfg.timing_1);
+ nand_writereg(ctrl, t2_offs, host->hwcfg.timing_2);
+ } else {
+ host->hwcfg.config = nand_readreg(ctrl, cfg_offs);
+ if (cfg_offs != cfg_ext_offs)
+ host->hwcfg.config_ext =
+ nand_readreg(ctrl, cfg_ext_offs);
+ host->hwcfg.acc_control = nand_readreg(ctrl, acc_control_offs);
+ host->hwcfg.timing_1 = nand_readreg(ctrl, t1_offs);
+ host->hwcfg.timing_2 = nand_readreg(ctrl, t2_offs);
+ }
+}
+
+static int brcmnand_suspend(struct device *dev)
+{
+ struct brcmnand_controller *ctrl = dev_get_drvdata(dev);
+ struct brcmnand_host *host;
+
+ list_for_each_entry(host, &ctrl->host_list, node)
+ brcmnand_save_restore_cs_config(host, 0);
+
+ ctrl->nand_cs_nand_select = brcmnand_read_reg(ctrl, BRCMNAND_CS_SELECT);
+ ctrl->nand_cs_nand_xor = brcmnand_read_reg(ctrl, BRCMNAND_CS_XOR);
+ ctrl->corr_stat_threshold =
+ brcmnand_read_reg(ctrl, BRCMNAND_CORR_THRESHOLD);
+
+ if (has_flash_dma(ctrl))
+ ctrl->flash_dma_mode = flash_dma_readl(ctrl, FLASH_DMA_MODE);
+
+ return 0;
+}
+
+static int brcmnand_resume(struct device *dev)
+{
+ struct brcmnand_controller *ctrl = dev_get_drvdata(dev);
+ struct brcmnand_host *host;
+
+ if (has_flash_dma(ctrl)) {
+ flash_dma_writel(ctrl, FLASH_DMA_MODE, ctrl->flash_dma_mode);
+ flash_dma_writel(ctrl, FLASH_DMA_ERROR_STATUS, 0);
+ }
+
+ brcmnand_write_reg(ctrl, BRCMNAND_CS_SELECT, ctrl->nand_cs_nand_select);
+ brcmnand_write_reg(ctrl, BRCMNAND_CS_XOR, ctrl->nand_cs_nand_xor);
+ brcmnand_write_reg(ctrl, BRCMNAND_CORR_THRESHOLD,
+ ctrl->corr_stat_threshold);
+ if (ctrl->soc) {
+ /* Clear/re-enable interrupt */
+ ctrl->soc->ctlrdy_ack(ctrl->soc);
+ ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
+ }
+
+ list_for_each_entry(host, &ctrl->host_list, node) {
+ struct mtd_info *mtd = &host->mtd;
+ struct nand_chip *chip = mtd->priv;
+
+ brcmnand_save_restore_cs_config(host, 1);
+
+ /* Reset the chip, required by some chips after power-up */
+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+ }
+
+ return 0;
+}
+
+const struct dev_pm_ops brcmnand_pm_ops = {
+ .suspend = brcmnand_suspend,
+ .resume = brcmnand_resume,
+};
+EXPORT_SYMBOL_GPL(brcmnand_pm_ops);
+
+static const struct of_device_id brcmnand_of_match[] = {
+ { .compatible = "brcm,brcmnand-v4.0" },
+ { .compatible = "brcm,brcmnand-v5.0" },
+ { .compatible = "brcm,brcmnand-v6.0" },
+ { .compatible = "brcm,brcmnand-v6.1" },
+ { .compatible = "brcm,brcmnand-v7.0" },
+ { .compatible = "brcm,brcmnand-v7.1" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, brcmnand_of_match);
+
+/***********************************************************************
+ * Platform driver setup (per controller)
+ ***********************************************************************/
+
+int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *dn = dev->of_node, *child;
+ struct brcmnand_controller *ctrl;
+ struct resource *res;
+ int ret;
+
+ /* We only support device-tree instantiation */
+ if (!dn)
+ return -ENODEV;
+
+ if (!of_match_node(brcmnand_of_match, dn))
+ return -ENODEV;
+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, ctrl);
+ ctrl->dev = dev;
+
+ init_completion(&ctrl->done);
+ init_completion(&ctrl->dma_done);
+ spin_lock_init(&ctrl->controller.lock);
+ init_waitqueue_head(&ctrl->controller.wq);
+ INIT_LIST_HEAD(&ctrl->host_list);
+
+ /* NAND register range */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ ctrl->nand_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ctrl->nand_base))
+ return PTR_ERR(ctrl->nand_base);
+
+ /* Initialize NAND revision */
+ ret = brcmnand_revision_init(ctrl);
+ if (ret)
+ return ret;
+
+ /*
+ * Most chips have this cache at a fixed offset within 'nand' block.
+ * Some must specify this region separately.
+ */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand-cache");
+ if (res) {
+ ctrl->nand_fc = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ctrl->nand_fc))
+ return PTR_ERR(ctrl->nand_fc);
+ } else {
+ ctrl->nand_fc = ctrl->nand_base +
+ ctrl->reg_offsets[BRCMNAND_FC_BASE];
+ }
+
+ /* FLASH_DMA */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "flash-dma");
+ if (res) {
+ ctrl->flash_dma_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(ctrl->flash_dma_base))
+ return PTR_ERR(ctrl->flash_dma_base);
+
+ flash_dma_writel(ctrl, FLASH_DMA_MODE, 1); /* linked-list */
+ flash_dma_writel(ctrl, FLASH_DMA_ERROR_STATUS, 0);
+
+ /* Allocate descriptor(s) */
+ ctrl->dma_desc = dmam_alloc_coherent(dev,
+ sizeof(*ctrl->dma_desc),
+ &ctrl->dma_pa, GFP_KERNEL);
+ if (!ctrl->dma_desc)
+ return -ENOMEM;
+
+ ctrl->dma_irq = platform_get_irq(pdev, 1);
+ if ((int)ctrl->dma_irq < 0) {
+ dev_err(dev, "missing FLASH_DMA IRQ\n");
+ return -ENODEV;
+ }
+
+ ret = devm_request_irq(dev, ctrl->dma_irq,
+ brcmnand_dma_irq, 0, DRV_NAME,
+ ctrl);
+ if (ret < 0) {
+ dev_err(dev, "can't allocate IRQ %d: error %d\n",
+ ctrl->dma_irq, ret);
+ return ret;
+ }
+
+ dev_info(dev, "enabling FLASH_DMA\n");
+ }
+
+ /* Disable automatic device ID config, direct addressing */
+ brcmnand_rmw_reg(ctrl, BRCMNAND_CS_SELECT,
+ CS_SELECT_AUTO_DEVICE_ID_CFG | 0xff, 0, 0);
+ /* Disable XOR addressing */
+ brcmnand_rmw_reg(ctrl, BRCMNAND_CS_XOR, 0xff, 0, 0);
+
+ if (ctrl->features & BRCMNAND_HAS_WP) {
+ /* Permanently disable write protection */
+ if (wp_on == 2)
+ brcmnand_set_wp(ctrl, false);
+ } else {
+ wp_on = 0;
+ }
+
+ /* IRQ */
+ ctrl->irq = platform_get_irq(pdev, 0);
+ if ((int)ctrl->irq < 0) {
+ dev_err(dev, "no IRQ defined\n");
+ return -ENODEV;
+ }
+
+ /*
+ * Some SoCs integrate this controller (e.g., its interrupt bits) in
+ * interesting ways
+ */
+ if (soc) {
+ ctrl->soc = soc;
+
+ ret = devm_request_irq(dev, ctrl->irq, brcmnand_irq, 0,
+ DRV_NAME, ctrl);
+
+ /* Enable interrupt */
+ ctrl->soc->ctlrdy_ack(ctrl->soc);
+ ctrl->soc->ctlrdy_set_enabled(ctrl->soc, true);
+ } else {
+ /* Use standard interrupt infrastructure */
+ ret = devm_request_irq(dev, ctrl->irq, brcmnand_ctlrdy_irq, 0,
+ DRV_NAME, ctrl);
+ }
+ if (ret < 0) {
+ dev_err(dev, "can't allocate IRQ %d: error %d\n",
+ ctrl->irq, ret);
+ return ret;
+ }
+
+ for_each_available_child_of_node(dn, child) {
+ if (of_device_is_compatible(child, "brcm,nandcs")) {
+ struct brcmnand_host *host;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+ host->pdev = pdev;
+ host->ctrl = ctrl;
+ host->of_node = child;
+
+ ret = brcmnand_init_cs(host);
+ if (ret)
+ continue; /* Try all chip-selects */
+
+ list_add_tail(&host->node, &ctrl->host_list);
+ }
+ }
+
+ /* No chip-selects could initialize properly */
+ if (list_empty(&ctrl->host_list))
+ return -ENODEV;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(brcmnand_probe);
+
+int brcmnand_remove(struct platform_device *pdev)
+{
+ struct brcmnand_controller *ctrl = dev_get_drvdata(&pdev->dev);
+ struct brcmnand_host *host;
+
+ list_for_each_entry(host, &ctrl->host_list, node)
+ nand_release(&host->mtd);
+
+ dev_set_drvdata(&pdev->dev, NULL);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(brcmnand_remove);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Kevin Cernekee");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("NAND driver for Broadcom chips");
+MODULE_ALIAS("platform:brcmnand");
diff --git a/drivers/mtd/nand/brcmnand/brcmnand.h b/drivers/mtd/nand/brcmnand/brcmnand.h
new file mode 100644
index 0000000..ef5eabb
--- /dev/null
+++ b/drivers/mtd/nand/brcmnand/brcmnand.h
@@ -0,0 +1,71 @@
+/*
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BRCMNAND_H__
+#define __BRCMNAND_H__
+
+#include <linux/types.h>
+#include <linux/io.h>
+
+struct platform_device;
+struct dev_pm_ops;
+
+struct brcmnand_soc {
+ bool (*ctlrdy_ack)(struct brcmnand_soc *soc);
+ void (*ctlrdy_set_enabled)(struct brcmnand_soc *soc, bool en);
+ void (*prepare_data_bus)(struct brcmnand_soc *soc, bool prepare);
+};
+
+static inline void brcmnand_soc_data_bus_prepare(struct brcmnand_soc *soc)
+{
+ if (soc && soc->prepare_data_bus)
+ soc->prepare_data_bus(soc, true);
+}
+
+static inline void brcmnand_soc_data_bus_unprepare(struct brcmnand_soc *soc)
+{
+ if (soc && soc->prepare_data_bus)
+ soc->prepare_data_bus(soc, false);
+}
+
+static inline u32 brcmnand_readl(void __iomem *addr)
+{
+ /*
+ * MIPS endianness is configured by boot strap, which also reverses all
+ * bus endianness (i.e., big-endian CPU + big endian bus ==> native
+ * endian I/O).
+ *
+ * Other architectures (e.g., ARM) either do not support big endian, or
+ * else leave I/O in little endian mode.
+ */
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+ return __raw_readl(addr);
+ else
+ return readl_relaxed(addr);
+}
+
+static inline void brcmnand_writel(u32 val, void __iomem *addr)
+{
+ /* See brcmnand_readl() comments */
+ if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
+ __raw_writel(val, addr);
+ else
+ writel_relaxed(val, addr);
+}
+
+int brcmnand_probe(struct platform_device *pdev, struct brcmnand_soc *soc);
+int brcmnand_remove(struct platform_device *pdev);
+
+extern const struct dev_pm_ops brcmnand_pm_ops;
+
+#endif /* __BRCMNAND_H__ */
diff --git a/drivers/mtd/nand/brcmnand/brcmstb_nand.c b/drivers/mtd/nand/brcmnand/brcmstb_nand.c
new file mode 100644
index 0000000..5c27107
--- /dev/null
+++ b/drivers/mtd/nand/brcmnand/brcmstb_nand.c
@@ -0,0 +1,44 @@
+/*
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "brcmnand.h"
+
+static const struct of_device_id brcmstb_nand_of_match[] = {
+ { .compatible = "brcm,brcmnand" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, brcmstb_nand_of_match);
+
+static int brcmstb_nand_probe(struct platform_device *pdev)
+{
+ return brcmnand_probe(pdev, NULL);
+}
+
+static struct platform_driver brcmstb_nand_driver = {
+ .probe = brcmstb_nand_probe,
+ .remove = brcmnand_remove,
+ .driver = {
+ .name = "brcmstb_nand",
+ .pm = &brcmnand_pm_ops,
+ .of_match_table = brcmstb_nand_of_match,
+ }
+};
+module_platform_driver(brcmstb_nand_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_DESCRIPTION("NAND driver for Broadcom STB chips");
diff --git a/drivers/mtd/nand/brcmnand/iproc_nand.c b/drivers/mtd/nand/brcmnand/iproc_nand.c
new file mode 100644
index 0000000..585596c
--- /dev/null
+++ b/drivers/mtd/nand/brcmnand/iproc_nand.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright © 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "brcmnand.h"
+
+struct iproc_nand_soc {
+ struct brcmnand_soc soc;
+
+ void __iomem *idm_base;
+ void __iomem *ext_base;
+ spinlock_t idm_lock;
+};
+
+#define IPROC_NAND_CTLR_READY_OFFSET 0x10
+#define IPROC_NAND_CTLR_READY BIT(0)
+
+#define IPROC_NAND_IO_CTRL_OFFSET 0x00
+#define IPROC_NAND_APB_LE_MODE BIT(24)
+#define IPROC_NAND_INT_CTRL_READ_ENABLE BIT(6)
+
+static bool iproc_nand_intc_ack(struct brcmnand_soc *soc)
+{
+ struct iproc_nand_soc *priv =
+ container_of(soc, struct iproc_nand_soc, soc);
+ void __iomem *mmio = priv->ext_base + IPROC_NAND_CTLR_READY_OFFSET;
+ u32 val = brcmnand_readl(mmio);
+
+ if (val & IPROC_NAND_CTLR_READY) {
+ brcmnand_writel(IPROC_NAND_CTLR_READY, mmio);
+ return true;
+ }
+
+ return false;
+}
+
+static void iproc_nand_intc_set(struct brcmnand_soc *soc, bool en)
+{
+ struct iproc_nand_soc *priv =
+ container_of(soc, struct iproc_nand_soc, soc);
+ void __iomem *mmio = priv->idm_base + IPROC_NAND_IO_CTRL_OFFSET;
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->idm_lock, flags);
+
+ val = brcmnand_readl(mmio);
+
+ if (en)
+ val |= IPROC_NAND_INT_CTRL_READ_ENABLE;
+ else
+ val &= ~IPROC_NAND_INT_CTRL_READ_ENABLE;
+
+ brcmnand_writel(val, mmio);
+
+ spin_unlock_irqrestore(&priv->idm_lock, flags);
+}
+
+static void iproc_nand_apb_access(struct brcmnand_soc *soc, bool prepare)
+{
+ struct iproc_nand_soc *priv =
+ container_of(soc, struct iproc_nand_soc, soc);
+ void __iomem *mmio = priv->idm_base + IPROC_NAND_IO_CTRL_OFFSET;
+ u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&priv->idm_lock, flags);
+
+ val = brcmnand_readl(mmio);
+
+ if (prepare)
+ val |= IPROC_NAND_APB_LE_MODE;
+ else
+ val &= ~IPROC_NAND_APB_LE_MODE;
+
+ brcmnand_writel(val, mmio);
+
+ spin_unlock_irqrestore(&priv->idm_lock, flags);
+}
+
+static int iproc_nand_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct iproc_nand_soc *priv;
+ struct brcmnand_soc *soc;
+ struct resource *res;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+ soc = &priv->soc;
+
+ spin_lock_init(&priv->idm_lock);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "iproc-idm");
+ priv->idm_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->idm_base))
+ return PTR_ERR(priv->idm_base);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "iproc-ext");
+ priv->ext_base = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->ext_base))
+ return PTR_ERR(priv->ext_base);
+
+ soc->ctlrdy_ack = iproc_nand_intc_ack;
+ soc->ctlrdy_set_enabled = iproc_nand_intc_set;
+ soc->prepare_data_bus = iproc_nand_apb_access;
+
+ return brcmnand_probe(pdev, soc);
+}
+
+static const struct of_device_id iproc_nand_of_match[] = {
+ { .compatible = "brcm,nand-iproc" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, iproc_nand_of_match);
+
+static struct platform_driver iproc_nand_driver = {
+ .probe = iproc_nand_probe,
+ .remove = brcmnand_remove,
+ .driver = {
+ .name = "iproc_nand",
+ .pm = &brcmnand_pm_ops,
+ .of_match_table = iproc_nand_of_match,
+ }
+};
+module_platform_driver(iproc_nand_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Brian Norris");
+MODULE_AUTHOR("Ray Jui");
+MODULE_DESCRIPTION("NAND driver for Broadcom IPROC-based SoCs");
diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c
new file mode 100644
index 0000000..9de78d2
--- /dev/null
+++ b/drivers/mtd/nand/cafe_nand.c
@@ -0,0 +1,869 @@
+/*
+ * Driver for One Laptop Per Child ‘CAFÉ’ controller, aka Marvell 88ALP01
+ *
+ * The data sheet for this device can be found at:
+ * http://wiki.laptop.org/go/Datasheets
+ *
+ * Copyright © 2006 Red Hat, Inc.
+ * Copyright © 2006 David Woodhouse <dwmw2@infradead.org>
+ */
+
+#define DEBUG
+
+#include <linux/device.h>
+#undef DEBUG
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/rslib.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <asm/io.h>
+
+#define CAFE_NAND_CTRL1 0x00
+#define CAFE_NAND_CTRL2 0x04
+#define CAFE_NAND_CTRL3 0x08
+#define CAFE_NAND_STATUS 0x0c
+#define CAFE_NAND_IRQ 0x10
+#define CAFE_NAND_IRQ_MASK 0x14
+#define CAFE_NAND_DATA_LEN 0x18
+#define CAFE_NAND_ADDR1 0x1c
+#define CAFE_NAND_ADDR2 0x20
+#define CAFE_NAND_TIMING1 0x24
+#define CAFE_NAND_TIMING2 0x28
+#define CAFE_NAND_TIMING3 0x2c
+#define CAFE_NAND_NONMEM 0x30
+#define CAFE_NAND_ECC_RESULT 0x3C
+#define CAFE_NAND_DMA_CTRL 0x40
+#define CAFE_NAND_DMA_ADDR0 0x44
+#define CAFE_NAND_DMA_ADDR1 0x48
+#define CAFE_NAND_ECC_SYN01 0x50
+#define CAFE_NAND_ECC_SYN23 0x54
+#define CAFE_NAND_ECC_SYN45 0x58
+#define CAFE_NAND_ECC_SYN67 0x5c
+#define CAFE_NAND_READ_DATA 0x1000
+#define CAFE_NAND_WRITE_DATA 0x2000
+
+#define CAFE_GLOBAL_CTRL 0x3004
+#define CAFE_GLOBAL_IRQ 0x3008
+#define CAFE_GLOBAL_IRQ_MASK 0x300c
+#define CAFE_NAND_RESET 0x3034
+
+/* Missing from the datasheet: bit 19 of CTRL1 sets CE0 vs. CE1 */
+#define CTRL1_CHIPSELECT (1<<19)
+
+struct cafe_priv {
+ struct nand_chip nand;
+ struct pci_dev *pdev;
+ void __iomem *mmio;
+ struct rs_control *rs;
+ uint32_t ctl1;
+ uint32_t ctl2;
+ int datalen;
+ int nr_data;
+ int data_pos;
+ int page_addr;
+ dma_addr_t dmaaddr;
+ unsigned char *dmabuf;
+};
+
+static int usedma = 1;
+module_param(usedma, int, 0644);
+
+static int skipbbt = 0;
+module_param(skipbbt, int, 0644);
+
+static int debug = 0;
+module_param(debug, int, 0644);
+
+static int regdebug = 0;
+module_param(regdebug, int, 0644);
+
+static int checkecc = 1;
+module_param(checkecc, int, 0644);
+
+static unsigned int numtimings;
+static int timing[3];
+module_param_array(timing, int, &numtimings, 0644);
+
+static const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL };
+
+/* Hrm. Why isn't this already conditional on something in the struct device? */
+#define cafe_dev_dbg(dev, args...) do { if (debug) dev_dbg(dev, ##args); } while(0)
+
+/* Make it easier to switch to PIO if we need to */
+#define cafe_readl(cafe, addr) readl((cafe)->mmio + CAFE_##addr)
+#define cafe_writel(cafe, datum, addr) writel(datum, (cafe)->mmio + CAFE_##addr)
+
+static int cafe_device_ready(struct mtd_info *mtd)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ int result = !!(cafe_readl(cafe, NAND_STATUS) & 0x40000000);
+ uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
+
+ cafe_writel(cafe, irqs, NAND_IRQ);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "NAND device is%s ready, IRQ %x (%x) (%x,%x)\n",
+ result?"":" not", irqs, cafe_readl(cafe, NAND_IRQ),
+ cafe_readl(cafe, GLOBAL_IRQ), cafe_readl(cafe, GLOBAL_IRQ_MASK));
+
+ return result;
+}
+
+
+static void cafe_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ if (usedma)
+ memcpy(cafe->dmabuf + cafe->datalen, buf, len);
+ else
+ memcpy_toio(cafe->mmio + CAFE_NAND_WRITE_DATA + cafe->datalen, buf, len);
+
+ cafe->datalen += len;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes to write buffer. datalen 0x%x\n",
+ len, cafe->datalen);
+}
+
+static void cafe_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ if (usedma)
+ memcpy(buf, cafe->dmabuf + cafe->datalen, len);
+ else
+ memcpy_fromio(buf, cafe->mmio + CAFE_NAND_READ_DATA + cafe->datalen, len);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Copy 0x%x bytes from position 0x%x in read buffer.\n",
+ len, cafe->datalen);
+ cafe->datalen += len;
+}
+
+static uint8_t cafe_read_byte(struct mtd_info *mtd)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ uint8_t d;
+
+ cafe_read_buf(mtd, &d, 1);
+ cafe_dev_dbg(&cafe->pdev->dev, "Read %02x\n", d);
+
+ return d;
+}
+
+static void cafe_nand_cmdfunc(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ int adrbytes = 0;
+ uint32_t ctl1;
+ uint32_t doneint = 0x80000000;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "cmdfunc %02x, 0x%x, 0x%x\n",
+ command, column, page_addr);
+
+ if (command == NAND_CMD_ERASE2 || command == NAND_CMD_PAGEPROG) {
+ /* Second half of a command we already calculated */
+ cafe_writel(cafe, cafe->ctl2 | 0x100 | command, NAND_CTRL2);
+ ctl1 = cafe->ctl1;
+ cafe->ctl2 &= ~(1<<30);
+ cafe_dev_dbg(&cafe->pdev->dev, "Continue command, ctl1 %08x, #data %d\n",
+ cafe->ctl1, cafe->nr_data);
+ goto do_command;
+ }
+ /* Reset ECC engine */
+ cafe_writel(cafe, 0, NAND_CTRL2);
+
+ /* Emulate NAND_CMD_READOOB on large-page chips */
+ if (mtd->writesize > 512 &&
+ command == NAND_CMD_READOOB) {
+ column += mtd->writesize;
+ command = NAND_CMD_READ0;
+ }
+
+ /* FIXME: Do we need to send read command before sending data
+ for small-page chips, to position the buffer correctly? */
+
+ if (column != -1) {
+ cafe_writel(cafe, column, NAND_ADDR1);
+ adrbytes = 2;
+ if (page_addr != -1)
+ goto write_adr2;
+ } else if (page_addr != -1) {
+ cafe_writel(cafe, page_addr & 0xffff, NAND_ADDR1);
+ page_addr >>= 16;
+ write_adr2:
+ cafe_writel(cafe, page_addr, NAND_ADDR2);
+ adrbytes += 2;
+ if (mtd->size > mtd->writesize << 16)
+ adrbytes++;
+ }
+
+ cafe->data_pos = cafe->datalen = 0;
+
+ /* Set command valid bit, mask in the chip select bit */
+ ctl1 = 0x80000000 | command | (cafe->ctl1 & CTRL1_CHIPSELECT);
+
+ /* Set RD or WR bits as appropriate */
+ if (command == NAND_CMD_READID || command == NAND_CMD_STATUS) {
+ ctl1 |= (1<<26); /* rd */
+ /* Always 5 bytes, for now */
+ cafe->datalen = 4;
+ /* And one address cycle -- even for STATUS, since the controller doesn't work without */
+ adrbytes = 1;
+ } else if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 ||
+ command == NAND_CMD_READOOB || command == NAND_CMD_RNDOUT) {
+ ctl1 |= 1<<26; /* rd */
+ /* For now, assume just read to end of page */
+ cafe->datalen = mtd->writesize + mtd->oobsize - column;
+ } else if (command == NAND_CMD_SEQIN)
+ ctl1 |= 1<<25; /* wr */
+
+ /* Set number of address bytes */
+ if (adrbytes)
+ ctl1 |= ((adrbytes-1)|8) << 27;
+
+ if (command == NAND_CMD_SEQIN || command == NAND_CMD_ERASE1) {
+ /* Ignore the first command of a pair; the hardware
+ deals with them both at once, later */
+ cafe->ctl1 = ctl1;
+ cafe_dev_dbg(&cafe->pdev->dev, "Setup for delayed command, ctl1 %08x, dlen %x\n",
+ cafe->ctl1, cafe->datalen);
+ return;
+ }
+ /* RNDOUT and READ0 commands need a following byte */
+ if (command == NAND_CMD_RNDOUT)
+ cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_RNDOUTSTART, NAND_CTRL2);
+ else if (command == NAND_CMD_READ0 && mtd->writesize > 512)
+ cafe_writel(cafe, cafe->ctl2 | 0x100 | NAND_CMD_READSTART, NAND_CTRL2);
+
+ do_command:
+ cafe_dev_dbg(&cafe->pdev->dev, "dlen %x, ctl1 %x, ctl2 %x\n",
+ cafe->datalen, ctl1, cafe_readl(cafe, NAND_CTRL2));
+
+ /* NB: The datasheet lies -- we really should be subtracting 1 here */
+ cafe_writel(cafe, cafe->datalen, NAND_DATA_LEN);
+ cafe_writel(cafe, 0x90000000, NAND_IRQ);
+ if (usedma && (ctl1 & (3<<25))) {
+ uint32_t dmactl = 0xc0000000 + cafe->datalen;
+ /* If WR or RD bits set, set up DMA */
+ if (ctl1 & (1<<26)) {
+ /* It's a read */
+ dmactl |= (1<<29);
+ /* ... so it's done when the DMA is done, not just
+ the command. */
+ doneint = 0x10000000;
+ }
+ cafe_writel(cafe, dmactl, NAND_DMA_CTRL);
+ }
+ cafe->datalen = 0;
+
+ if (unlikely(regdebug)) {
+ int i;
+ printk("About to write command %08x to register 0\n", ctl1);
+ for (i=4; i< 0x5c; i+=4)
+ printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
+ }
+
+ cafe_writel(cafe, ctl1, NAND_CTRL1);
+ /* Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine. */
+ ndelay(100);
+
+ if (1) {
+ int c;
+ uint32_t irqs;
+
+ for (c = 500000; c != 0; c--) {
+ irqs = cafe_readl(cafe, NAND_IRQ);
+ if (irqs & doneint)
+ break;
+ udelay(1);
+ if (!(c % 100000))
+ cafe_dev_dbg(&cafe->pdev->dev, "Wait for ready, IRQ %x\n", irqs);
+ cpu_relax();
+ }
+ cafe_writel(cafe, doneint, NAND_IRQ);
+ cafe_dev_dbg(&cafe->pdev->dev, "Command %x completed after %d usec, irqs %x (%x)\n",
+ command, 500000-c, irqs, cafe_readl(cafe, NAND_IRQ));
+ }
+
+ WARN_ON(cafe->ctl2 & (1<<30));
+
+ switch (command) {
+
+ case NAND_CMD_CACHEDPROG:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_RNDOUT:
+ cafe_writel(cafe, cafe->ctl2, NAND_CTRL2);
+ return;
+ }
+ nand_wait_ready(mtd);
+ cafe_writel(cafe, cafe->ctl2, NAND_CTRL2);
+}
+
+static void cafe_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "select_chip %d\n", chipnr);
+
+ /* Mask the appropriate bit into the stored value of ctl1
+ which will be used by cafe_nand_cmdfunc() */
+ if (chipnr)
+ cafe->ctl1 |= CTRL1_CHIPSELECT;
+ else
+ cafe->ctl1 &= ~CTRL1_CHIPSELECT;
+}
+
+static irqreturn_t cafe_nand_interrupt(int irq, void *id)
+{
+ struct mtd_info *mtd = id;
+ struct cafe_priv *cafe = mtd->priv;
+ uint32_t irqs = cafe_readl(cafe, NAND_IRQ);
+ cafe_writel(cafe, irqs & ~0x90000000, NAND_IRQ);
+ if (!irqs)
+ return IRQ_NONE;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "irq, bits %x (%x)\n", irqs, cafe_readl(cafe, NAND_IRQ));
+ return IRQ_HANDLED;
+}
+
+static void cafe_nand_bug(struct mtd_info *mtd)
+{
+ BUG();
+}
+
+static int cafe_nand_write_oob(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ int status = 0;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/* Don't use -- use nand_read_oob_std for now */
+static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+/**
+ * cafe_nand_read_page_syndrome - [REPLACEABLE] hardware ecc syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller expects OOB data read to chip->oob_poi
+ *
+ * The hw generator calculates the error syndrome automatically. Therefore
+ * we need a special oob layout and handling.
+ */
+static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct cafe_priv *cafe = mtd->priv;
+ unsigned int max_bitflips = 0;
+
+ cafe_dev_dbg(&cafe->pdev->dev, "ECC result %08x SYN1,2 %08x\n",
+ cafe_readl(cafe, NAND_ECC_RESULT),
+ cafe_readl(cafe, NAND_ECC_SYN01));
+
+ chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ if (checkecc && cafe_readl(cafe, NAND_ECC_RESULT) & (1<<18)) {
+ unsigned short syn[8], pat[4];
+ int pos[4];
+ u8 *oob = chip->oob_poi;
+ int i, n;
+
+ for (i=0; i<8; i+=2) {
+ uint32_t tmp = cafe_readl(cafe, NAND_ECC_SYN01 + (i*2));
+ syn[i] = cafe->rs->index_of[tmp & 0xfff];
+ syn[i+1] = cafe->rs->index_of[(tmp >> 16) & 0xfff];
+ }
+
+ n = decode_rs16(cafe->rs, NULL, NULL, 1367, syn, 0, pos, 0,
+ pat);
+
+ for (i = 0; i < n; i++) {
+ int p = pos[i];
+
+ /* The 12-bit symbols are mapped to bytes here */
+
+ if (p > 1374) {
+ /* out of range */
+ n = -1374;
+ } else if (p == 0) {
+ /* high four bits do not correspond to data */
+ if (pat[i] > 0xff)
+ n = -2048;
+ else
+ buf[0] ^= pat[i];
+ } else if (p == 1365) {
+ buf[2047] ^= pat[i] >> 4;
+ oob[0] ^= pat[i] << 4;
+ } else if (p > 1365) {
+ if ((p & 1) == 1) {
+ oob[3*p/2 - 2048] ^= pat[i] >> 4;
+ oob[3*p/2 - 2047] ^= pat[i] << 4;
+ } else {
+ oob[3*p/2 - 2049] ^= pat[i] >> 8;
+ oob[3*p/2 - 2048] ^= pat[i];
+ }
+ } else if ((p & 1) == 1) {
+ buf[3*p/2] ^= pat[i] >> 4;
+ buf[3*p/2 + 1] ^= pat[i] << 4;
+ } else {
+ buf[3*p/2 - 1] ^= pat[i] >> 8;
+ buf[3*p/2] ^= pat[i];
+ }
+ }
+
+ if (n < 0) {
+ dev_dbg(&cafe->pdev->dev, "Failed to correct ECC at %08x\n",
+ cafe_readl(cafe, NAND_ADDR2) * 2048);
+ for (i = 0; i < 0x5c; i += 4)
+ printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
+ mtd->ecc_stats.failed++;
+ } else {
+ dev_dbg(&cafe->pdev->dev, "Corrected %d symbol errors\n", n);
+ mtd->ecc_stats.corrected += n;
+ max_bitflips = max_t(unsigned int, max_bitflips, n);
+ }
+ }
+
+ return max_bitflips;
+}
+
+static struct nand_ecclayout cafe_oobinfo_2048 = {
+ .eccbytes = 14,
+ .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
+ .oobfree = {{14, 50}}
+};
+
+/* Ick. The BBT code really ought to be able to work this bit out
+ for itself from the above, at least for the 2KiB case */
+static uint8_t cafe_bbt_pattern_2048[] = { 'B', 'b', 't', '0' };
+static uint8_t cafe_mirror_pattern_2048[] = { '1', 't', 'b', 'B' };
+
+static uint8_t cafe_bbt_pattern_512[] = { 0xBB };
+static uint8_t cafe_mirror_pattern_512[] = { 0xBC };
+
+
+static struct nand_bbt_descr cafe_bbt_main_descr_2048 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 14,
+ .len = 4,
+ .veroffs = 18,
+ .maxblocks = 4,
+ .pattern = cafe_bbt_pattern_2048
+};
+
+static struct nand_bbt_descr cafe_bbt_mirror_descr_2048 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 14,
+ .len = 4,
+ .veroffs = 18,
+ .maxblocks = 4,
+ .pattern = cafe_mirror_pattern_2048
+};
+
+static struct nand_ecclayout cafe_oobinfo_512 = {
+ .eccbytes = 14,
+ .eccpos = { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13},
+ .oobfree = {{14, 2}}
+};
+
+static struct nand_bbt_descr cafe_bbt_main_descr_512 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 14,
+ .len = 1,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = cafe_bbt_pattern_512
+};
+
+static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 14,
+ .len = 1,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = cafe_mirror_pattern_512
+};
+
+
+static int cafe_nand_write_page_lowlevel(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ struct cafe_priv *cafe = mtd->priv;
+
+ chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /* Set up ECC autogeneration */
+ cafe->ctl2 |= (1<<30);
+
+ return 0;
+}
+
+static int cafe_nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ return 0;
+}
+
+/* F_2[X]/(X**6+X+1) */
+static unsigned short gf64_mul(u8 a, u8 b)
+{
+ u8 c;
+ unsigned int i;
+
+ c = 0;
+ for (i = 0; i < 6; i++) {
+ if (a & 1)
+ c ^= b;
+ a >>= 1;
+ b <<= 1;
+ if ((b & 0x40) != 0)
+ b ^= 0x43;
+ }
+
+ return c;
+}
+
+/* F_64[X]/(X**2+X+A**-1) with A the generator of F_64[X] */
+static u16 gf4096_mul(u16 a, u16 b)
+{
+ u8 ah, al, bh, bl, ch, cl;
+
+ ah = a >> 6;
+ al = a & 0x3f;
+ bh = b >> 6;
+ bl = b & 0x3f;
+
+ ch = gf64_mul(ah ^ al, bh ^ bl) ^ gf64_mul(al, bl);
+ cl = gf64_mul(gf64_mul(ah, bh), 0x21) ^ gf64_mul(al, bl);
+
+ return (ch << 6) ^ cl;
+}
+
+static int cafe_mul(int x)
+{
+ if (x == 0)
+ return 1;
+ return gf4096_mul(x, 0xe01);
+}
+
+static int cafe_nand_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct mtd_info *mtd;
+ struct cafe_priv *cafe;
+ uint32_t ctrl;
+ int err = 0;
+ int old_dma;
+ struct nand_buffers *nbuf;
+
+ /* Very old versions shared the same PCI ident for all three
+ functions on the chip. Verify the class too... */
+ if ((pdev->class >> 8) != PCI_CLASS_MEMORY_FLASH)
+ return -ENODEV;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ pci_set_master(pdev);
+
+ mtd = kzalloc(sizeof(*mtd) + sizeof(struct cafe_priv), GFP_KERNEL);
+ if (!mtd)
+ return -ENOMEM;
+ cafe = (void *)(&mtd[1]);
+
+ mtd->dev.parent = &pdev->dev;
+ mtd->priv = cafe;
+
+ cafe->pdev = pdev;
+ cafe->mmio = pci_iomap(pdev, 0, 0);
+ if (!cafe->mmio) {
+ dev_warn(&pdev->dev, "failed to iomap\n");
+ err = -ENOMEM;
+ goto out_free_mtd;
+ }
+
+ cafe->rs = init_rs_non_canonical(12, &cafe_mul, 0, 1, 8);
+ if (!cafe->rs) {
+ err = -ENOMEM;
+ goto out_ior;
+ }
+
+ cafe->nand.cmdfunc = cafe_nand_cmdfunc;
+ cafe->nand.dev_ready = cafe_device_ready;
+ cafe->nand.read_byte = cafe_read_byte;
+ cafe->nand.read_buf = cafe_read_buf;
+ cafe->nand.write_buf = cafe_write_buf;
+ cafe->nand.select_chip = cafe_select_chip;
+
+ cafe->nand.chip_delay = 0;
+
+ /* Enable the following for a flash based bad block table */
+ cafe->nand.bbt_options = NAND_BBT_USE_FLASH;
+ cafe->nand.options = NAND_OWN_BUFFERS;
+
+ if (skipbbt) {
+ cafe->nand.options |= NAND_SKIP_BBTSCAN;
+ cafe->nand.block_bad = cafe_nand_block_bad;
+ }
+
+ if (numtimings && numtimings != 3) {
+ dev_warn(&cafe->pdev->dev, "%d timing register values ignored; precisely three are required\n", numtimings);
+ }
+
+ if (numtimings == 3) {
+ cafe_dev_dbg(&cafe->pdev->dev, "Using provided timings (%08x %08x %08x)\n",
+ timing[0], timing[1], timing[2]);
+ } else {
+ timing[0] = cafe_readl(cafe, NAND_TIMING1);
+ timing[1] = cafe_readl(cafe, NAND_TIMING2);
+ timing[2] = cafe_readl(cafe, NAND_TIMING3);
+
+ if (timing[0] | timing[1] | timing[2]) {
+ cafe_dev_dbg(&cafe->pdev->dev, "Timing registers already set (%08x %08x %08x)\n",
+ timing[0], timing[1], timing[2]);
+ } else {
+ dev_warn(&cafe->pdev->dev, "Timing registers unset; using most conservative defaults\n");
+ timing[0] = timing[1] = timing[2] = 0xffffffff;
+ }
+ }
+
+ /* Start off by resetting the NAND controller completely */
+ cafe_writel(cafe, 1, NAND_RESET);
+ cafe_writel(cafe, 0, NAND_RESET);
+
+ cafe_writel(cafe, timing[0], NAND_TIMING1);
+ cafe_writel(cafe, timing[1], NAND_TIMING2);
+ cafe_writel(cafe, timing[2], NAND_TIMING3);
+
+ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
+ err = request_irq(pdev->irq, &cafe_nand_interrupt, IRQF_SHARED,
+ "CAFE NAND", mtd);
+ if (err) {
+ dev_warn(&pdev->dev, "Could not register IRQ %d\n", pdev->irq);
+ goto out_ior;
+ }
+
+ /* Disable master reset, enable NAND clock */
+ ctrl = cafe_readl(cafe, GLOBAL_CTRL);
+ ctrl &= 0xffffeff0;
+ ctrl |= 0x00007000;
+ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL);
+ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL);
+ cafe_writel(cafe, 0, NAND_DMA_CTRL);
+
+ cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
+ cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
+
+ /* Enable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
+ cafe_dev_dbg(&cafe->pdev->dev, "Control %x, IRQ mask %x\n",
+ cafe_readl(cafe, GLOBAL_CTRL),
+ cafe_readl(cafe, GLOBAL_IRQ_MASK));
+
+ /* Do not use the DMA for the nand_scan_ident() */
+ old_dma = usedma;
+ usedma = 0;
+
+ /* Scan to find existence of the device */
+ if (nand_scan_ident(mtd, 2, NULL)) {
+ err = -ENXIO;
+ goto out_irq;
+ }
+
+ cafe->dmabuf = dma_alloc_coherent(&cafe->pdev->dev,
+ 2112 + sizeof(struct nand_buffers) +
+ mtd->writesize + mtd->oobsize,
+ &cafe->dmaaddr, GFP_KERNEL);
+ if (!cafe->dmabuf) {
+ err = -ENOMEM;
+ goto out_irq;
+ }
+ cafe->nand.buffers = nbuf = (void *)cafe->dmabuf + 2112;
+
+ /* Set up DMA address */
+ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
+ if (sizeof(cafe->dmaaddr) > 4)
+ /* Shift in two parts to shut the compiler up */
+ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1);
+ else
+ cafe_writel(cafe, 0, NAND_DMA_ADDR1);
+
+ cafe_dev_dbg(&cafe->pdev->dev, "Set DMA address to %x (virt %p)\n",
+ cafe_readl(cafe, NAND_DMA_ADDR0), cafe->dmabuf);
+
+ /* this driver does not need the @ecccalc and @ecccode */
+ nbuf->ecccalc = NULL;
+ nbuf->ecccode = NULL;
+ nbuf->databuf = (uint8_t *)(nbuf + 1);
+
+ /* Restore the DMA flag */
+ usedma = old_dma;
+
+ cafe->ctl2 = 1<<27; /* Reed-Solomon ECC */
+ if (mtd->writesize == 2048)
+ cafe->ctl2 |= 1<<29; /* 2KiB page size */
+
+ /* Set up ECC according to the type of chip we found */
+ if (mtd->writesize == 2048) {
+ cafe->nand.ecc.layout = &cafe_oobinfo_2048;
+ cafe->nand.bbt_td = &cafe_bbt_main_descr_2048;
+ cafe->nand.bbt_md = &cafe_bbt_mirror_descr_2048;
+ } else if (mtd->writesize == 512) {
+ cafe->nand.ecc.layout = &cafe_oobinfo_512;
+ cafe->nand.bbt_td = &cafe_bbt_main_descr_512;
+ cafe->nand.bbt_md = &cafe_bbt_mirror_descr_512;
+ } else {
+ printk(KERN_WARNING "Unexpected NAND flash writesize %d. Aborting\n",
+ mtd->writesize);
+ goto out_free_dma;
+ }
+ cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+ cafe->nand.ecc.size = mtd->writesize;
+ cafe->nand.ecc.bytes = 14;
+ cafe->nand.ecc.strength = 4;
+ cafe->nand.ecc.hwctl = (void *)cafe_nand_bug;
+ cafe->nand.ecc.calculate = (void *)cafe_nand_bug;
+ cafe->nand.ecc.correct = (void *)cafe_nand_bug;
+ cafe->nand.ecc.write_page = cafe_nand_write_page_lowlevel;
+ cafe->nand.ecc.write_oob = cafe_nand_write_oob;
+ cafe->nand.ecc.read_page = cafe_nand_read_page;
+ cafe->nand.ecc.read_oob = cafe_nand_read_oob;
+
+ err = nand_scan_tail(mtd);
+ if (err)
+ goto out_free_dma;
+
+ pci_set_drvdata(pdev, mtd);
+
+ mtd->name = "cafe_nand";
+ mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
+
+ goto out;
+
+ out_free_dma:
+ dma_free_coherent(&cafe->pdev->dev,
+ 2112 + sizeof(struct nand_buffers) +
+ mtd->writesize + mtd->oobsize,
+ cafe->dmabuf, cafe->dmaaddr);
+ out_irq:
+ /* Disable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
+ free_irq(pdev->irq, mtd);
+ out_ior:
+ pci_iounmap(pdev, cafe->mmio);
+ out_free_mtd:
+ kfree(mtd);
+ out:
+ return err;
+}
+
+static void cafe_nand_remove(struct pci_dev *pdev)
+{
+ struct mtd_info *mtd = pci_get_drvdata(pdev);
+ struct cafe_priv *cafe = mtd->priv;
+
+ /* Disable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, ~1 & cafe_readl(cafe, GLOBAL_IRQ_MASK), GLOBAL_IRQ_MASK);
+ free_irq(pdev->irq, mtd);
+ nand_release(mtd);
+ free_rs(cafe->rs);
+ pci_iounmap(pdev, cafe->mmio);
+ dma_free_coherent(&cafe->pdev->dev,
+ 2112 + sizeof(struct nand_buffers) +
+ mtd->writesize + mtd->oobsize,
+ cafe->dmabuf, cafe->dmaaddr);
+ kfree(mtd);
+}
+
+static const struct pci_device_id cafe_nand_tbl[] = {
+ { PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_88ALP01_NAND,
+ PCI_ANY_ID, PCI_ANY_ID },
+ { }
+};
+
+MODULE_DEVICE_TABLE(pci, cafe_nand_tbl);
+
+static int cafe_nand_resume(struct pci_dev *pdev)
+{
+ uint32_t ctrl;
+ struct mtd_info *mtd = pci_get_drvdata(pdev);
+ struct cafe_priv *cafe = mtd->priv;
+
+ /* Start off by resetting the NAND controller completely */
+ cafe_writel(cafe, 1, NAND_RESET);
+ cafe_writel(cafe, 0, NAND_RESET);
+ cafe_writel(cafe, 0xffffffff, NAND_IRQ_MASK);
+
+ /* Restore timing configuration */
+ cafe_writel(cafe, timing[0], NAND_TIMING1);
+ cafe_writel(cafe, timing[1], NAND_TIMING2);
+ cafe_writel(cafe, timing[2], NAND_TIMING3);
+
+ /* Disable master reset, enable NAND clock */
+ ctrl = cafe_readl(cafe, GLOBAL_CTRL);
+ ctrl &= 0xffffeff0;
+ ctrl |= 0x00007000;
+ cafe_writel(cafe, ctrl | 0x05, GLOBAL_CTRL);
+ cafe_writel(cafe, ctrl | 0x0a, GLOBAL_CTRL);
+ cafe_writel(cafe, 0, NAND_DMA_CTRL);
+ cafe_writel(cafe, 0x7006, GLOBAL_CTRL);
+ cafe_writel(cafe, 0x700a, GLOBAL_CTRL);
+
+ /* Set up DMA address */
+ cafe_writel(cafe, cafe->dmaaddr & 0xffffffff, NAND_DMA_ADDR0);
+ if (sizeof(cafe->dmaaddr) > 4)
+ /* Shift in two parts to shut the compiler up */
+ cafe_writel(cafe, (cafe->dmaaddr >> 16) >> 16, NAND_DMA_ADDR1);
+ else
+ cafe_writel(cafe, 0, NAND_DMA_ADDR1);
+
+ /* Enable NAND IRQ in global IRQ mask register */
+ cafe_writel(cafe, 0x80000007, GLOBAL_IRQ_MASK);
+ return 0;
+}
+
+static struct pci_driver cafe_nand_pci_driver = {
+ .name = "CAFÉ NAND",
+ .id_table = cafe_nand_tbl,
+ .probe = cafe_nand_probe,
+ .remove = cafe_nand_remove,
+ .resume = cafe_nand_resume,
+};
+
+module_pci_driver(cafe_nand_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("NAND flash driver for OLPC CAFÉ chip");
diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c
new file mode 100644
index 0000000..66ec95e
--- /dev/null
+++ b/drivers/mtd/nand/cmx270_nand.c
@@ -0,0 +1,250 @@
+/*
+ * linux/drivers/mtd/nand/cmx270-nand.c
+ *
+ * Copyright (C) 2006 Compulab, Ltd.
+ * Mike Rapoport <mike@compulab.co.il>
+ *
+ * Derived from drivers/mtd/nand/h1910.c
+ * Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
+ * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Overview:
+ * This is a device driver for the NAND flash device found on the
+ * CM-X270 board.
+ */
+
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/module.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mach-types.h>
+
+#include <mach/pxa2xx-regs.h>
+
+#define GPIO_NAND_CS (11)
+#define GPIO_NAND_RB (89)
+
+/* MTD structure for CM-X270 board */
+static struct mtd_info *cmx270_nand_mtd;
+
+/* remaped IO address of the device */
+static void __iomem *cmx270_nand_io;
+
+/*
+ * Define static partitions for flash device
+ */
+static struct mtd_partition partition_info[] = {
+ [0] = {
+ .name = "cmx270-0",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL
+ }
+};
+#define NUM_PARTITIONS (ARRAY_SIZE(partition_info))
+
+static u_char cmx270_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+
+ return (readl(this->IO_ADDR_R) >> 16);
+}
+
+static void cmx270_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+
+ for (i=0; i<len; i++)
+ writel((*buf++ << 16), this->IO_ADDR_W);
+}
+
+static void cmx270_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+
+ for (i=0; i<len; i++)
+ *buf++ = readl(this->IO_ADDR_R) >> 16;
+}
+
+static inline void nand_cs_on(void)
+{
+ gpio_set_value(GPIO_NAND_CS, 0);
+}
+
+static void nand_cs_off(void)
+{
+ dsb();
+
+ gpio_set_value(GPIO_NAND_CS, 1);
+}
+
+/*
+ * hardware specific access to control-lines
+ */
+static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
+ unsigned int ctrl)
+{
+ struct nand_chip* this = mtd->priv;
+ unsigned int nandaddr = (unsigned int)this->IO_ADDR_W;
+
+ dsb();
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ( ctrl & NAND_ALE )
+ nandaddr |= (1 << 3);
+ else
+ nandaddr &= ~(1 << 3);
+ if ( ctrl & NAND_CLE )
+ nandaddr |= (1 << 2);
+ else
+ nandaddr &= ~(1 << 2);
+ if ( ctrl & NAND_NCE )
+ nand_cs_on();
+ else
+ nand_cs_off();
+ }
+
+ dsb();
+ this->IO_ADDR_W = (void __iomem*)nandaddr;
+ if (dat != NAND_CMD_NONE)
+ writel((dat << 16), this->IO_ADDR_W);
+
+ dsb();
+}
+
+/*
+ * read device ready pin
+ */
+static int cmx270_device_ready(struct mtd_info *mtd)
+{
+ dsb();
+
+ return (gpio_get_value(GPIO_NAND_RB));
+}
+
+/*
+ * Main initialization routine
+ */
+static int __init cmx270_init(void)
+{
+ struct nand_chip *this;
+ int ret;
+
+ if (!(machine_is_armcore() && cpu_is_pxa27x()))
+ return -ENODEV;
+
+ ret = gpio_request(GPIO_NAND_CS, "NAND CS");
+ if (ret) {
+ pr_warning("CM-X270: failed to request NAND CS gpio\n");
+ return ret;
+ }
+
+ gpio_direction_output(GPIO_NAND_CS, 1);
+
+ ret = gpio_request(GPIO_NAND_RB, "NAND R/B");
+ if (ret) {
+ pr_warning("CM-X270: failed to request NAND R/B gpio\n");
+ goto err_gpio_request;
+ }
+
+ gpio_direction_input(GPIO_NAND_RB);
+
+ /* Allocate memory for MTD device structure and private data */
+ cmx270_nand_mtd = kzalloc(sizeof(struct mtd_info) +
+ sizeof(struct nand_chip),
+ GFP_KERNEL);
+ if (!cmx270_nand_mtd) {
+ ret = -ENOMEM;
+ goto err_kzalloc;
+ }
+
+ cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12);
+ if (!cmx270_nand_io) {
+ pr_debug("Unable to ioremap NAND device\n");
+ ret = -EINVAL;
+ goto err_ioremap;
+ }
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *)(&cmx270_nand_mtd[1]);
+
+ /* Link the private data with the MTD structure */
+ cmx270_nand_mtd->owner = THIS_MODULE;
+ cmx270_nand_mtd->priv = this;
+
+ /* insert callbacks */
+ this->IO_ADDR_R = cmx270_nand_io;
+ this->IO_ADDR_W = cmx270_nand_io;
+ this->cmd_ctrl = cmx270_hwcontrol;
+ this->dev_ready = cmx270_device_ready;
+
+ /* 15 us command delay time */
+ this->chip_delay = 20;
+ this->ecc.mode = NAND_ECC_SOFT;
+
+ /* read/write functions */
+ this->read_byte = cmx270_read_byte;
+ this->read_buf = cmx270_read_buf;
+ this->write_buf = cmx270_write_buf;
+
+ /* Scan to find existence of the device */
+ if (nand_scan (cmx270_nand_mtd, 1)) {
+ pr_notice("No NAND device\n");
+ ret = -ENXIO;
+ goto err_scan;
+ }
+
+ /* Register the partitions */
+ ret = mtd_device_parse_register(cmx270_nand_mtd, NULL, NULL,
+ partition_info, NUM_PARTITIONS);
+ if (ret)
+ goto err_scan;
+
+ /* Return happy */
+ return 0;
+
+err_scan:
+ iounmap(cmx270_nand_io);
+err_ioremap:
+ kfree(cmx270_nand_mtd);
+err_kzalloc:
+ gpio_free(GPIO_NAND_RB);
+err_gpio_request:
+ gpio_free(GPIO_NAND_CS);
+
+ return ret;
+
+}
+module_init(cmx270_init);
+
+/*
+ * Clean up routine
+ */
+static void __exit cmx270_cleanup(void)
+{
+ /* Release resources, unregister device */
+ nand_release(cmx270_nand_mtd);
+
+ gpio_free(GPIO_NAND_RB);
+ gpio_free(GPIO_NAND_CS);
+
+ iounmap(cmx270_nand_io);
+
+ /* Free the MTD device structure */
+ kfree (cmx270_nand_mtd);
+}
+module_exit(cmx270_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
+MODULE_DESCRIPTION("NAND flash driver for Compulab CM-X270 Module");
diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c
new file mode 100644
index 0000000..aec6045
--- /dev/null
+++ b/drivers/mtd/nand/cs553x_nand.c
@@ -0,0 +1,360 @@
+/*
+ * drivers/mtd/nand/cs553x_nand.c
+ *
+ * (C) 2005, 2006 Red Hat Inc.
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ * Tom Sylla <tom.sylla@amd.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Overview:
+ * This is a device driver for the NAND flash controller found on
+ * the AMD CS5535/CS5536 companion chipsets for the Geode processor.
+ * mtd-id for command line partitioning is cs553x_nand_cs[0-3]
+ * where 0-3 reflects the chip select for NAND.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/msr.h>
+#include <asm/io.h>
+
+#define NR_CS553X_CONTROLLERS 4
+
+#define MSR_DIVIL_GLD_CAP 0x51400000 /* DIVIL capabilitiies */
+#define CAP_CS5535 0x2df000ULL
+#define CAP_CS5536 0x5df500ULL
+
+/* NAND Timing MSRs */
+#define MSR_NANDF_DATA 0x5140001b /* NAND Flash Data Timing MSR */
+#define MSR_NANDF_CTL 0x5140001c /* NAND Flash Control Timing */
+#define MSR_NANDF_RSVD 0x5140001d /* Reserved */
+
+/* NAND BAR MSRs */
+#define MSR_DIVIL_LBAR_FLSH0 0x51400010 /* Flash Chip Select 0 */
+#define MSR_DIVIL_LBAR_FLSH1 0x51400011 /* Flash Chip Select 1 */
+#define MSR_DIVIL_LBAR_FLSH2 0x51400012 /* Flash Chip Select 2 */
+#define MSR_DIVIL_LBAR_FLSH3 0x51400013 /* Flash Chip Select 3 */
+ /* Each made up of... */
+#define FLSH_LBAR_EN (1ULL<<32)
+#define FLSH_NOR_NAND (1ULL<<33) /* 1 for NAND */
+#define FLSH_MEM_IO (1ULL<<34) /* 1 for MMIO */
+ /* I/O BARs have BASE_ADDR in bits 15:4, IO_MASK in 47:36 */
+ /* MMIO BARs have BASE_ADDR in bits 31:12, MEM_MASK in 63:44 */
+
+/* Pin function selection MSR (IDE vs. flash on the IDE pins) */
+#define MSR_DIVIL_BALL_OPTS 0x51400015
+#define PIN_OPT_IDE (1<<0) /* 0 for flash, 1 for IDE */
+
+/* Registers within the NAND flash controller BAR -- memory mapped */
+#define MM_NAND_DATA 0x00 /* 0 to 0x7ff, in fact */
+#define MM_NAND_CTL 0x800 /* Any even address 0x800-0x80e */
+#define MM_NAND_IO 0x801 /* Any odd address 0x801-0x80f */
+#define MM_NAND_STS 0x810
+#define MM_NAND_ECC_LSB 0x811
+#define MM_NAND_ECC_MSB 0x812
+#define MM_NAND_ECC_COL 0x813
+#define MM_NAND_LAC 0x814
+#define MM_NAND_ECC_CTL 0x815
+
+/* Registers within the NAND flash controller BAR -- I/O mapped */
+#define IO_NAND_DATA 0x00 /* 0 to 3, in fact */
+#define IO_NAND_CTL 0x04
+#define IO_NAND_IO 0x05
+#define IO_NAND_STS 0x06
+#define IO_NAND_ECC_CTL 0x08
+#define IO_NAND_ECC_LSB 0x09
+#define IO_NAND_ECC_MSB 0x0a
+#define IO_NAND_ECC_COL 0x0b
+#define IO_NAND_LAC 0x0c
+
+#define CS_NAND_CTL_DIST_EN (1<<4) /* Enable NAND Distract interrupt */
+#define CS_NAND_CTL_RDY_INT_MASK (1<<3) /* Enable RDY/BUSY# interrupt */
+#define CS_NAND_CTL_ALE (1<<2)
+#define CS_NAND_CTL_CLE (1<<1)
+#define CS_NAND_CTL_CE (1<<0) /* Keep low; 1 to reset */
+
+#define CS_NAND_STS_FLASH_RDY (1<<3)
+#define CS_NAND_CTLR_BUSY (1<<2)
+#define CS_NAND_CMD_COMP (1<<1)
+#define CS_NAND_DIST_ST (1<<0)
+
+#define CS_NAND_ECC_PARITY (1<<2)
+#define CS_NAND_ECC_CLRECC (1<<1)
+#define CS_NAND_ECC_ENECC (1<<0)
+
+static void cs553x_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+
+ while (unlikely(len > 0x800)) {
+ memcpy_fromio(buf, this->IO_ADDR_R, 0x800);
+ buf += 0x800;
+ len -= 0x800;
+ }
+ memcpy_fromio(buf, this->IO_ADDR_R, len);
+}
+
+static void cs553x_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+
+ while (unlikely(len > 0x800)) {
+ memcpy_toio(this->IO_ADDR_R, buf, 0x800);
+ buf += 0x800;
+ len -= 0x800;
+ }
+ memcpy_toio(this->IO_ADDR_R, buf, len);
+}
+
+static unsigned char cs553x_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ return readb(this->IO_ADDR_R);
+}
+
+static void cs553x_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nand_chip *this = mtd->priv;
+ int i = 100000;
+
+ while (i && readb(this->IO_ADDR_R + MM_NAND_STS) & CS_NAND_CTLR_BUSY) {
+ udelay(1);
+ i--;
+ }
+ writeb(byte, this->IO_ADDR_W + 0x801);
+}
+
+static void cs553x_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ void __iomem *mmio_base = this->IO_ADDR_R;
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned char ctl = (ctrl & ~NAND_CTRL_CHANGE ) ^ 0x01;
+ writeb(ctl, mmio_base + MM_NAND_CTL);
+ }
+ if (cmd != NAND_CMD_NONE)
+ cs553x_write_byte(mtd, cmd);
+}
+
+static int cs553x_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ void __iomem *mmio_base = this->IO_ADDR_R;
+ unsigned char foo = readb(mmio_base + MM_NAND_STS);
+
+ return (foo & CS_NAND_STS_FLASH_RDY) && !(foo & CS_NAND_CTLR_BUSY);
+}
+
+static void cs_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct nand_chip *this = mtd->priv;
+ void __iomem *mmio_base = this->IO_ADDR_R;
+
+ writeb(0x07, mmio_base + MM_NAND_ECC_CTL);
+}
+
+static int cs_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code)
+{
+ uint32_t ecc;
+ struct nand_chip *this = mtd->priv;
+ void __iomem *mmio_base = this->IO_ADDR_R;
+
+ ecc = readl(mmio_base + MM_NAND_STS);
+
+ ecc_code[1] = ecc >> 8;
+ ecc_code[0] = ecc >> 16;
+ ecc_code[2] = ecc >> 24;
+ return 0;
+}
+
+static struct mtd_info *cs553x_mtd[4];
+
+static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
+{
+ int err = 0;
+ struct nand_chip *this;
+ struct mtd_info *new_mtd;
+
+ printk(KERN_NOTICE "Probing CS553x NAND controller CS#%d at %sIO 0x%08lx\n", cs, mmio?"MM":"P", adr);
+
+ if (!mmio) {
+ printk(KERN_NOTICE "PIO mode not yet implemented for CS553X NAND controller\n");
+ return -ENXIO;
+ }
+
+ /* Allocate memory for MTD device structure and private data */
+ new_mtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), GFP_KERNEL);
+ if (!new_mtd) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *)(&new_mtd[1]);
+
+ /* Link the private data with the MTD structure */
+ new_mtd->priv = this;
+ new_mtd->owner = THIS_MODULE;
+
+ /* map physical address */
+ this->IO_ADDR_R = this->IO_ADDR_W = ioremap(adr, 4096);
+ if (!this->IO_ADDR_R) {
+ printk(KERN_WARNING "ioremap cs553x NAND @0x%08lx failed\n", adr);
+ err = -EIO;
+ goto out_mtd;
+ }
+
+ this->cmd_ctrl = cs553x_hwcontrol;
+ this->dev_ready = cs553x_device_ready;
+ this->read_byte = cs553x_read_byte;
+ this->read_buf = cs553x_read_buf;
+ this->write_buf = cs553x_write_buf;
+
+ this->chip_delay = 0;
+
+ this->ecc.mode = NAND_ECC_HW;
+ this->ecc.size = 256;
+ this->ecc.bytes = 3;
+ this->ecc.hwctl = cs_enable_hwecc;
+ this->ecc.calculate = cs_calculate_ecc;
+ this->ecc.correct = nand_correct_data;
+ this->ecc.strength = 1;
+
+ /* Enable the following for a flash based bad block table */
+ this->bbt_options = NAND_BBT_USE_FLASH;
+
+ new_mtd->name = kasprintf(GFP_KERNEL, "cs553x_nand_cs%d", cs);
+ if (!new_mtd->name) {
+ err = -ENOMEM;
+ goto out_ior;
+ }
+
+ /* Scan to find existence of the device */
+ if (nand_scan(new_mtd, 1)) {
+ err = -ENXIO;
+ goto out_free;
+ }
+
+ cs553x_mtd[cs] = new_mtd;
+ goto out;
+
+out_free:
+ kfree(new_mtd->name);
+out_ior:
+ iounmap(this->IO_ADDR_R);
+out_mtd:
+ kfree(new_mtd);
+out:
+ return err;
+}
+
+static int is_geode(void)
+{
+ /* These are the CPUs which will have a CS553[56] companion chip */
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_AMD &&
+ boot_cpu_data.x86 == 5 &&
+ boot_cpu_data.x86_model == 10)
+ return 1; /* Geode LX */
+
+ if ((boot_cpu_data.x86_vendor == X86_VENDOR_NSC ||
+ boot_cpu_data.x86_vendor == X86_VENDOR_CYRIX) &&
+ boot_cpu_data.x86 == 5 &&
+ boot_cpu_data.x86_model == 5)
+ return 1; /* Geode GX (née GX2) */
+
+ return 0;
+}
+
+static int __init cs553x_init(void)
+{
+ int err = -ENXIO;
+ int i;
+ uint64_t val;
+
+ /* If the CPU isn't a Geode GX or LX, abort */
+ if (!is_geode())
+ return -ENXIO;
+
+ /* If it doesn't have the CS553[56], abort */
+ rdmsrl(MSR_DIVIL_GLD_CAP, val);
+ val &= ~0xFFULL;
+ if (val != CAP_CS5535 && val != CAP_CS5536)
+ return -ENXIO;
+
+ /* If it doesn't have the NAND controller enabled, abort */
+ rdmsrl(MSR_DIVIL_BALL_OPTS, val);
+ if (val & PIN_OPT_IDE) {
+ printk(KERN_INFO "CS553x NAND controller: Flash I/O not enabled in MSR_DIVIL_BALL_OPTS.\n");
+ return -ENXIO;
+ }
+
+ for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
+ rdmsrl(MSR_DIVIL_LBAR_FLSH0 + i, val);
+
+ if ((val & (FLSH_LBAR_EN|FLSH_NOR_NAND)) == (FLSH_LBAR_EN|FLSH_NOR_NAND))
+ err = cs553x_init_one(i, !!(val & FLSH_MEM_IO), val & 0xFFFFFFFF);
+ }
+
+ /* Register all devices together here. This means we can easily hack it to
+ do mtdconcat etc. if we want to. */
+ for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
+ if (cs553x_mtd[i]) {
+ /* If any devices registered, return success. Else the last error. */
+ mtd_device_parse_register(cs553x_mtd[i], NULL, NULL,
+ NULL, 0);
+ err = 0;
+ }
+ }
+
+ return err;
+}
+
+module_init(cs553x_init);
+
+static void __exit cs553x_cleanup(void)
+{
+ int i;
+
+ for (i = 0; i < NR_CS553X_CONTROLLERS; i++) {
+ struct mtd_info *mtd = cs553x_mtd[i];
+ struct nand_chip *this;
+ void __iomem *mmio_base;
+
+ if (!mtd)
+ continue;
+
+ this = cs553x_mtd[i]->priv;
+ mmio_base = this->IO_ADDR_R;
+
+ /* Release resources, unregister device */
+ nand_release(cs553x_mtd[i]);
+ kfree(cs553x_mtd[i]->name);
+ cs553x_mtd[i] = NULL;
+
+ /* unmap physical address */
+ iounmap(mmio_base);
+
+ /* Free the MTD device structure */
+ kfree(mtd);
+ }
+}
+
+module_exit(cs553x_cleanup);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("NAND controller driver for AMD CS5535/CS5536 companion chip");
diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c
new file mode 100644
index 0000000..bc054a5
--- /dev/null
+++ b/drivers/mtd/nand/davinci_nand.c
@@ -0,0 +1,903 @@
+/*
+ * davinci_nand.c - NAND Flash Driver for DaVinci family chips
+ *
+ * Copyright © 2006 Texas Instruments.
+ *
+ * Port to 2.6.23 Copyright © 2008 by:
+ * Sander Huijsen <Shuijsen@optelecom-nkf.com>
+ * Troy Kisky <troy.kisky@boundarydevices.com>
+ * Dirk Behme <Dirk.Behme@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/slab.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+
+#include <linux/platform_data/mtd-davinci.h>
+#include <linux/platform_data/mtd-davinci-aemif.h>
+
+/*
+ * This is a device driver for the NAND flash controller found on the
+ * various DaVinci family chips. It handles up to four SoC chipselects,
+ * and some flavors of secondary chipselect (e.g. based on A12) as used
+ * with multichip packages.
+ *
+ * The 1-bit ECC hardware is supported, as well as the newer 4-bit ECC
+ * available on chips like the DM355 and OMAP-L137 and needed with the
+ * more error-prone MLC NAND chips.
+ *
+ * This driver assumes EM_WAIT connects all the NAND devices' RDY/nBUSY
+ * outputs in a "wire-AND" configuration, with no per-chip signals.
+ */
+struct davinci_nand_info {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ struct nand_ecclayout ecclayout;
+
+ struct device *dev;
+ struct clk *clk;
+
+ bool is_readmode;
+
+ void __iomem *base;
+ void __iomem *vaddr;
+
+ uint32_t ioaddr;
+ uint32_t current_cs;
+
+ uint32_t mask_chipsel;
+ uint32_t mask_ale;
+ uint32_t mask_cle;
+
+ uint32_t core_chipsel;
+
+ struct davinci_aemif_timing *timing;
+};
+
+static DEFINE_SPINLOCK(davinci_nand_lock);
+static bool ecc4_busy;
+
+#define to_davinci_nand(m) container_of(m, struct davinci_nand_info, mtd)
+
+
+static inline unsigned int davinci_nand_readl(struct davinci_nand_info *info,
+ int offset)
+{
+ return __raw_readl(info->base + offset);
+}
+
+static inline void davinci_nand_writel(struct davinci_nand_info *info,
+ int offset, unsigned long value)
+{
+ __raw_writel(value, info->base + offset);
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * Access to hardware control lines: ALE, CLE, secondary chipselect.
+ */
+
+static void nand_davinci_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct davinci_nand_info *info = to_davinci_nand(mtd);
+ uint32_t addr = info->current_cs;
+ struct nand_chip *nand = mtd->priv;
+
+ /* Did the control lines change? */
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if ((ctrl & NAND_CTRL_CLE) == NAND_CTRL_CLE)
+ addr |= info->mask_cle;
+ else if ((ctrl & NAND_CTRL_ALE) == NAND_CTRL_ALE)
+ addr |= info->mask_ale;
+
+ nand->IO_ADDR_W = (void __iomem __force *)addr;
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ iowrite8(cmd, nand->IO_ADDR_W);
+}
+
+static void nand_davinci_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct davinci_nand_info *info = to_davinci_nand(mtd);
+ uint32_t addr = info->ioaddr;
+
+ /* maybe kick in a second chipselect */
+ if (chip > 0)
+ addr |= info->mask_chipsel;
+ info->current_cs = addr;
+
+ info->chip.IO_ADDR_W = (void __iomem __force *)addr;
+ info->chip.IO_ADDR_R = info->chip.IO_ADDR_W;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * 1-bit hardware ECC ... context maintained for each core chipselect
+ */
+
+static inline uint32_t nand_davinci_readecc_1bit(struct mtd_info *mtd)
+{
+ struct davinci_nand_info *info = to_davinci_nand(mtd);
+
+ return davinci_nand_readl(info, NANDF1ECC_OFFSET
+ + 4 * info->core_chipsel);
+}
+
+static void nand_davinci_hwctl_1bit(struct mtd_info *mtd, int mode)
+{
+ struct davinci_nand_info *info;
+ uint32_t nandcfr;
+ unsigned long flags;
+
+ info = to_davinci_nand(mtd);
+
+ /* Reset ECC hardware */
+ nand_davinci_readecc_1bit(mtd);
+
+ spin_lock_irqsave(&davinci_nand_lock, flags);
+
+ /* Restart ECC hardware */
+ nandcfr = davinci_nand_readl(info, NANDFCR_OFFSET);
+ nandcfr |= BIT(8 + info->core_chipsel);
+ davinci_nand_writel(info, NANDFCR_OFFSET, nandcfr);
+
+ spin_unlock_irqrestore(&davinci_nand_lock, flags);
+}
+
+/*
+ * Read hardware ECC value and pack into three bytes
+ */
+static int nand_davinci_calculate_1bit(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_code)
+{
+ unsigned int ecc_val = nand_davinci_readecc_1bit(mtd);
+ unsigned int ecc24 = (ecc_val & 0x0fff) | ((ecc_val & 0x0fff0000) >> 4);
+
+ /* invert so that erased block ecc is correct */
+ ecc24 = ~ecc24;
+ ecc_code[0] = (u_char)(ecc24);
+ ecc_code[1] = (u_char)(ecc24 >> 8);
+ ecc_code[2] = (u_char)(ecc24 >> 16);
+
+ return 0;
+}
+
+static int nand_davinci_correct_1bit(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *chip = mtd->priv;
+ uint32_t eccNand = read_ecc[0] | (read_ecc[1] << 8) |
+ (read_ecc[2] << 16);
+ uint32_t eccCalc = calc_ecc[0] | (calc_ecc[1] << 8) |
+ (calc_ecc[2] << 16);
+ uint32_t diff = eccCalc ^ eccNand;
+
+ if (diff) {
+ if ((((diff >> 12) ^ diff) & 0xfff) == 0xfff) {
+ /* Correctable error */
+ if ((diff >> (12 + 3)) < chip->ecc.size) {
+ dat[diff >> (12 + 3)] ^= BIT((diff >> 12) & 7);
+ return 1;
+ } else {
+ return -1;
+ }
+ } else if (!(diff & (diff - 1))) {
+ /* Single bit ECC error in the ECC itself,
+ * nothing to fix */
+ return 1;
+ } else {
+ /* Uncorrectable error */
+ return -1;
+ }
+
+ }
+ return 0;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * 4-bit hardware ECC ... context maintained over entire AEMIF
+ *
+ * This is a syndrome engine, but we avoid NAND_ECC_HW_SYNDROME
+ * since that forces use of a problematic "infix OOB" layout.
+ * Among other things, it trashes manufacturer bad block markers.
+ * Also, and specific to this hardware, it ECC-protects the "prepad"
+ * in the OOB ... while having ECC protection for parts of OOB would
+ * seem useful, the current MTD stack sometimes wants to update the
+ * OOB without recomputing ECC.
+ */
+
+static void nand_davinci_hwctl_4bit(struct mtd_info *mtd, int mode)
+{
+ struct davinci_nand_info *info = to_davinci_nand(mtd);
+ unsigned long flags;
+ u32 val;
+
+ /* Reset ECC hardware */
+ davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET);
+
+ spin_lock_irqsave(&davinci_nand_lock, flags);
+
+ /* Start 4-bit ECC calculation for read/write */
+ val = davinci_nand_readl(info, NANDFCR_OFFSET);
+ val &= ~(0x03 << 4);
+ val |= (info->core_chipsel << 4) | BIT(12);
+ davinci_nand_writel(info, NANDFCR_OFFSET, val);
+
+ info->is_readmode = (mode == NAND_ECC_READ);
+
+ spin_unlock_irqrestore(&davinci_nand_lock, flags);
+}
+
+/* Read raw ECC code after writing to NAND. */
+static void
+nand_davinci_readecc_4bit(struct davinci_nand_info *info, u32 code[4])
+{
+ const u32 mask = 0x03ff03ff;
+
+ code[0] = davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET) & mask;
+ code[1] = davinci_nand_readl(info, NAND_4BIT_ECC2_OFFSET) & mask;
+ code[2] = davinci_nand_readl(info, NAND_4BIT_ECC3_OFFSET) & mask;
+ code[3] = davinci_nand_readl(info, NAND_4BIT_ECC4_OFFSET) & mask;
+}
+
+/* Terminate read ECC; or return ECC (as bytes) of data written to NAND. */
+static int nand_davinci_calculate_4bit(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_code)
+{
+ struct davinci_nand_info *info = to_davinci_nand(mtd);
+ u32 raw_ecc[4], *p;
+ unsigned i;
+
+ /* After a read, terminate ECC calculation by a dummy read
+ * of some 4-bit ECC register. ECC covers everything that
+ * was read; correct() just uses the hardware state, so
+ * ecc_code is not needed.
+ */
+ if (info->is_readmode) {
+ davinci_nand_readl(info, NAND_4BIT_ECC1_OFFSET);
+ return 0;
+ }
+
+ /* Pack eight raw 10-bit ecc values into ten bytes, making
+ * two passes which each convert four values (in upper and
+ * lower halves of two 32-bit words) into five bytes. The
+ * ROM boot loader uses this same packing scheme.
+ */
+ nand_davinci_readecc_4bit(info, raw_ecc);
+ for (i = 0, p = raw_ecc; i < 2; i++, p += 2) {
+ *ecc_code++ = p[0] & 0xff;
+ *ecc_code++ = ((p[0] >> 8) & 0x03) | ((p[0] >> 14) & 0xfc);
+ *ecc_code++ = ((p[0] >> 22) & 0x0f) | ((p[1] << 4) & 0xf0);
+ *ecc_code++ = ((p[1] >> 4) & 0x3f) | ((p[1] >> 10) & 0xc0);
+ *ecc_code++ = (p[1] >> 18) & 0xff;
+ }
+
+ return 0;
+}
+
+/* Correct up to 4 bits in data we just read, using state left in the
+ * hardware plus the ecc_code computed when it was first written.
+ */
+static int nand_davinci_correct_4bit(struct mtd_info *mtd,
+ u_char *data, u_char *ecc_code, u_char *null)
+{
+ int i;
+ struct davinci_nand_info *info = to_davinci_nand(mtd);
+ unsigned short ecc10[8];
+ unsigned short *ecc16;
+ u32 syndrome[4];
+ u32 ecc_state;
+ unsigned num_errors, corrected;
+ unsigned long timeo;
+
+ /* All bytes 0xff? It's an erased page; ignore its ECC. */
+ for (i = 0; i < 10; i++) {
+ if (ecc_code[i] != 0xff)
+ goto compare;
+ }
+ return 0;
+
+compare:
+ /* Unpack ten bytes into eight 10 bit values. We know we're
+ * little-endian, and use type punning for less shifting/masking.
+ */
+ if (WARN_ON(0x01 & (unsigned) ecc_code))
+ return -EINVAL;
+ ecc16 = (unsigned short *)ecc_code;
+
+ ecc10[0] = (ecc16[0] >> 0) & 0x3ff;
+ ecc10[1] = ((ecc16[0] >> 10) & 0x3f) | ((ecc16[1] << 6) & 0x3c0);
+ ecc10[2] = (ecc16[1] >> 4) & 0x3ff;
+ ecc10[3] = ((ecc16[1] >> 14) & 0x3) | ((ecc16[2] << 2) & 0x3fc);
+ ecc10[4] = (ecc16[2] >> 8) | ((ecc16[3] << 8) & 0x300);
+ ecc10[5] = (ecc16[3] >> 2) & 0x3ff;
+ ecc10[6] = ((ecc16[3] >> 12) & 0xf) | ((ecc16[4] << 4) & 0x3f0);
+ ecc10[7] = (ecc16[4] >> 6) & 0x3ff;
+
+ /* Tell ECC controller about the expected ECC codes. */
+ for (i = 7; i >= 0; i--)
+ davinci_nand_writel(info, NAND_4BIT_ECC_LOAD_OFFSET, ecc10[i]);
+
+ /* Allow time for syndrome calculation ... then read it.
+ * A syndrome of all zeroes 0 means no detected errors.
+ */
+ davinci_nand_readl(info, NANDFSR_OFFSET);
+ nand_davinci_readecc_4bit(info, syndrome);
+ if (!(syndrome[0] | syndrome[1] | syndrome[2] | syndrome[3]))
+ return 0;
+
+ /*
+ * Clear any previous address calculation by doing a dummy read of an
+ * error address register.
+ */
+ davinci_nand_readl(info, NAND_ERR_ADD1_OFFSET);
+
+ /* Start address calculation, and wait for it to complete.
+ * We _could_ start reading more data while this is working,
+ * to speed up the overall page read.
+ */
+ davinci_nand_writel(info, NANDFCR_OFFSET,
+ davinci_nand_readl(info, NANDFCR_OFFSET) | BIT(13));
+
+ /*
+ * ECC_STATE field reads 0x3 (Error correction complete) immediately
+ * after setting the 4BITECC_ADD_CALC_START bit. So if you immediately
+ * begin trying to poll for the state, you may fall right out of your
+ * loop without any of the correction calculations having taken place.
+ * The recommendation from the hardware team is to initially delay as
+ * long as ECC_STATE reads less than 4. After that, ECC HW has entered
+ * correction state.
+ */
+ timeo = jiffies + usecs_to_jiffies(100);
+ do {
+ ecc_state = (davinci_nand_readl(info,
+ NANDFSR_OFFSET) >> 8) & 0x0f;
+ cpu_relax();
+ } while ((ecc_state < 4) && time_before(jiffies, timeo));
+
+ for (;;) {
+ u32 fsr = davinci_nand_readl(info, NANDFSR_OFFSET);
+
+ switch ((fsr >> 8) & 0x0f) {
+ case 0: /* no error, should not happen */
+ davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
+ return 0;
+ case 1: /* five or more errors detected */
+ davinci_nand_readl(info, NAND_ERR_ERRVAL1_OFFSET);
+ return -EIO;
+ case 2: /* error addresses computed */
+ case 3:
+ num_errors = 1 + ((fsr >> 16) & 0x03);
+ goto correct;
+ default: /* still working on it */
+ cpu_relax();
+ continue;
+ }
+ }
+
+correct:
+ /* correct each error */
+ for (i = 0, corrected = 0; i < num_errors; i++) {
+ int error_address, error_value;
+
+ if (i > 1) {
+ error_address = davinci_nand_readl(info,
+ NAND_ERR_ADD2_OFFSET);
+ error_value = davinci_nand_readl(info,
+ NAND_ERR_ERRVAL2_OFFSET);
+ } else {
+ error_address = davinci_nand_readl(info,
+ NAND_ERR_ADD1_OFFSET);
+ error_value = davinci_nand_readl(info,
+ NAND_ERR_ERRVAL1_OFFSET);
+ }
+
+ if (i & 1) {
+ error_address >>= 16;
+ error_value >>= 16;
+ }
+ error_address &= 0x3ff;
+ error_address = (512 + 7) - error_address;
+
+ if (error_address < 512) {
+ data[error_address] ^= error_value;
+ corrected++;
+ }
+ }
+
+ return corrected;
+}
+
+/*----------------------------------------------------------------------*/
+
+/*
+ * NOTE: NAND boot requires ALE == EM_A[1], CLE == EM_A[2], so that's
+ * how these chips are normally wired. This translates to both 8 and 16
+ * bit busses using ALE == BIT(3) in byte addresses, and CLE == BIT(4).
+ *
+ * For now we assume that configuration, or any other one which ignores
+ * the two LSBs for NAND access ... so we can issue 32-bit reads/writes
+ * and have that transparently morphed into multiple NAND operations.
+ */
+static void nand_davinci_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if ((0x03 & ((unsigned)buf)) == 0 && (0x03 & len) == 0)
+ ioread32_rep(chip->IO_ADDR_R, buf, len >> 2);
+ else if ((0x01 & ((unsigned)buf)) == 0 && (0x01 & len) == 0)
+ ioread16_rep(chip->IO_ADDR_R, buf, len >> 1);
+ else
+ ioread8_rep(chip->IO_ADDR_R, buf, len);
+}
+
+static void nand_davinci_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if ((0x03 & ((unsigned)buf)) == 0 && (0x03 & len) == 0)
+ iowrite32_rep(chip->IO_ADDR_R, buf, len >> 2);
+ else if ((0x01 & ((unsigned)buf)) == 0 && (0x01 & len) == 0)
+ iowrite16_rep(chip->IO_ADDR_R, buf, len >> 1);
+ else
+ iowrite8_rep(chip->IO_ADDR_R, buf, len);
+}
+
+/*
+ * Check hardware register for wait status. Returns 1 if device is ready,
+ * 0 if it is still busy.
+ */
+static int nand_davinci_dev_ready(struct mtd_info *mtd)
+{
+ struct davinci_nand_info *info = to_davinci_nand(mtd);
+
+ return davinci_nand_readl(info, NANDFSR_OFFSET) & BIT(0);
+}
+
+/*----------------------------------------------------------------------*/
+
+/* An ECC layout for using 4-bit ECC with small-page flash, storing
+ * ten ECC bytes plus the manufacturer's bad block marker byte, and
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_small = {
+ .eccbytes = 10,
+ .eccpos = { 0, 1, 2, 3, 4,
+ /* offset 5 holds the badblock marker */
+ 6, 7,
+ 13, 14, 15, },
+ .oobfree = {
+ {.offset = 8, .length = 5, },
+ {.offset = 16, },
+ },
+};
+
+/* An ECC layout for using 4-bit ECC with large-page (2048bytes) flash,
+ * storing ten ECC bytes plus the manufacturer's bad block marker byte,
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_2048 = {
+ .eccbytes = 40,
+ .eccpos = {
+ /* at the end of spare sector */
+ 24, 25, 26, 27, 28, 29, 30, 31, 32, 33,
+ 34, 35, 36, 37, 38, 39, 40, 41, 42, 43,
+ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
+ 54, 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ },
+ .oobfree = {
+ /* 2 bytes at offset 0 hold manufacturer badblock markers */
+ {.offset = 2, .length = 22, },
+ /* 5 bytes at offset 8 hold BBT markers */
+ /* 8 bytes at offset 16 hold JFFS2 clean markers */
+ },
+};
+
+/*
+ * An ECC layout for using 4-bit ECC with large-page (4096bytes) flash,
+ * storing ten ECC bytes plus the manufacturer's bad block marker byte,
+ * and not overlapping the default BBT markers.
+ */
+static struct nand_ecclayout hwecc4_4096 = {
+ .eccbytes = 80,
+ .eccpos = {
+ /* at the end of spare sector */
+ 48, 49, 50, 51, 52, 53, 54, 55, 56, 57,
+ 58, 59, 60, 61, 62, 63, 64, 65, 66, 67,
+ 68, 69, 70, 71, 72, 73, 74, 75, 76, 77,
+ 78, 79, 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95, 96, 97,
+ 98, 99, 100, 101, 102, 103, 104, 105, 106, 107,
+ 108, 109, 110, 111, 112, 113, 114, 115, 116, 117,
+ 118, 119, 120, 121, 122, 123, 124, 125, 126, 127,
+ },
+ .oobfree = {
+ /* 2 bytes at offset 0 hold manufacturer badblock markers */
+ {.offset = 2, .length = 46, },
+ /* 5 bytes at offset 8 hold BBT markers */
+ /* 8 bytes at offset 16 hold JFFS2 clean markers */
+ },
+};
+
+#if defined(CONFIG_OF)
+static const struct of_device_id davinci_nand_of_match[] = {
+ {.compatible = "ti,davinci-nand", },
+ {.compatible = "ti,keystone-nand", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, davinci_nand_of_match);
+
+static struct davinci_nand_pdata
+ *nand_davinci_get_pdata(struct platform_device *pdev)
+{
+ if (!dev_get_platdata(&pdev->dev) && pdev->dev.of_node) {
+ struct davinci_nand_pdata *pdata;
+ const char *mode;
+ u32 prop;
+
+ pdata = devm_kzalloc(&pdev->dev,
+ sizeof(struct davinci_nand_pdata),
+ GFP_KERNEL);
+ pdev->dev.platform_data = pdata;
+ if (!pdata)
+ return ERR_PTR(-ENOMEM);
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "ti,davinci-chipselect", &prop))
+ pdev->id = prop;
+ else
+ return ERR_PTR(-EINVAL);
+
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "ti,davinci-mask-ale", &prop))
+ pdata->mask_ale = prop;
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "ti,davinci-mask-cle", &prop))
+ pdata->mask_cle = prop;
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "ti,davinci-mask-chipsel", &prop))
+ pdata->mask_chipsel = prop;
+ if (!of_property_read_string(pdev->dev.of_node,
+ "nand-ecc-mode", &mode) ||
+ !of_property_read_string(pdev->dev.of_node,
+ "ti,davinci-ecc-mode", &mode)) {
+ if (!strncmp("none", mode, 4))
+ pdata->ecc_mode = NAND_ECC_NONE;
+ if (!strncmp("soft", mode, 4))
+ pdata->ecc_mode = NAND_ECC_SOFT;
+ if (!strncmp("hw", mode, 2))
+ pdata->ecc_mode = NAND_ECC_HW;
+ }
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "ti,davinci-ecc-bits", &prop))
+ pdata->ecc_bits = prop;
+
+ prop = of_get_nand_bus_width(pdev->dev.of_node);
+ if (0 < prop || !of_property_read_u32(pdev->dev.of_node,
+ "ti,davinci-nand-buswidth", &prop))
+ if (prop == 16)
+ pdata->options |= NAND_BUSWIDTH_16;
+ if (of_property_read_bool(pdev->dev.of_node,
+ "nand-on-flash-bbt") ||
+ of_property_read_bool(pdev->dev.of_node,
+ "ti,davinci-nand-use-bbt"))
+ pdata->bbt_options = NAND_BBT_USE_FLASH;
+
+ if (of_device_is_compatible(pdev->dev.of_node,
+ "ti,keystone-nand")) {
+ pdata->options |= NAND_NO_SUBPAGE_WRITE;
+ }
+ }
+
+ return dev_get_platdata(&pdev->dev);
+}
+#else
+static struct davinci_nand_pdata
+ *nand_davinci_get_pdata(struct platform_device *pdev)
+{
+ return dev_get_platdata(&pdev->dev);
+}
+#endif
+
+static int nand_davinci_probe(struct platform_device *pdev)
+{
+ struct davinci_nand_pdata *pdata;
+ struct davinci_nand_info *info;
+ struct resource *res1;
+ struct resource *res2;
+ void __iomem *vaddr;
+ void __iomem *base;
+ int ret;
+ uint32_t val;
+ nand_ecc_modes_t ecc_mode;
+
+ pdata = nand_davinci_get_pdata(pdev);
+ if (IS_ERR(pdata))
+ return PTR_ERR(pdata);
+
+ /* insist on board-specific configuration */
+ if (!pdata)
+ return -ENODEV;
+
+ /* which external chipselect will we be managing? */
+ if (pdev->id < 0 || pdev->id > 3)
+ return -ENODEV;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, info);
+
+ res1 = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ res2 = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!res1 || !res2) {
+ dev_err(&pdev->dev, "resource missing\n");
+ return -EINVAL;
+ }
+
+ vaddr = devm_ioremap_resource(&pdev->dev, res1);
+ if (IS_ERR(vaddr))
+ return PTR_ERR(vaddr);
+
+ /*
+ * This registers range is used to setup NAND settings. In case with
+ * TI AEMIF driver, the same memory address range is requested already
+ * by AEMIF, so we cannot request it twice, just ioremap.
+ * The AEMIF and NAND drivers not use the same registers in this range.
+ */
+ base = devm_ioremap(&pdev->dev, res2->start, resource_size(res2));
+ if (!base) {
+ dev_err(&pdev->dev, "ioremap failed for resource %pR\n", res2);
+ return -EADDRNOTAVAIL;
+ }
+
+ info->dev = &pdev->dev;
+ info->base = base;
+ info->vaddr = vaddr;
+
+ info->mtd.priv = &info->chip;
+ info->mtd.dev.parent = &pdev->dev;
+
+ info->chip.IO_ADDR_R = vaddr;
+ info->chip.IO_ADDR_W = vaddr;
+ info->chip.chip_delay = 0;
+ info->chip.select_chip = nand_davinci_select_chip;
+
+ /* options such as NAND_BBT_USE_FLASH */
+ info->chip.bbt_options = pdata->bbt_options;
+ /* options such as 16-bit widths */
+ info->chip.options = pdata->options;
+ info->chip.bbt_td = pdata->bbt_td;
+ info->chip.bbt_md = pdata->bbt_md;
+ info->timing = pdata->timing;
+
+ info->ioaddr = (uint32_t __force) vaddr;
+
+ info->current_cs = info->ioaddr;
+ info->core_chipsel = pdev->id;
+ info->mask_chipsel = pdata->mask_chipsel;
+
+ /* use nandboot-capable ALE/CLE masks by default */
+ info->mask_ale = pdata->mask_ale ? : MASK_ALE;
+ info->mask_cle = pdata->mask_cle ? : MASK_CLE;
+
+ /* Set address of hardware control function */
+ info->chip.cmd_ctrl = nand_davinci_hwcontrol;
+ info->chip.dev_ready = nand_davinci_dev_ready;
+
+ /* Speed up buffer I/O */
+ info->chip.read_buf = nand_davinci_read_buf;
+ info->chip.write_buf = nand_davinci_write_buf;
+
+ /* Use board-specific ECC config */
+ ecc_mode = pdata->ecc_mode;
+
+ ret = -EINVAL;
+ switch (ecc_mode) {
+ case NAND_ECC_NONE:
+ case NAND_ECC_SOFT:
+ pdata->ecc_bits = 0;
+ break;
+ case NAND_ECC_HW:
+ if (pdata->ecc_bits == 4) {
+ /* No sanity checks: CPUs must support this,
+ * and the chips may not use NAND_BUSWIDTH_16.
+ */
+
+ /* No sharing 4-bit hardware between chipselects yet */
+ spin_lock_irq(&davinci_nand_lock);
+ if (ecc4_busy)
+ ret = -EBUSY;
+ else
+ ecc4_busy = true;
+ spin_unlock_irq(&davinci_nand_lock);
+
+ if (ret == -EBUSY)
+ return ret;
+
+ info->chip.ecc.calculate = nand_davinci_calculate_4bit;
+ info->chip.ecc.correct = nand_davinci_correct_4bit;
+ info->chip.ecc.hwctl = nand_davinci_hwctl_4bit;
+ info->chip.ecc.bytes = 10;
+ } else {
+ info->chip.ecc.calculate = nand_davinci_calculate_1bit;
+ info->chip.ecc.correct = nand_davinci_correct_1bit;
+ info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
+ info->chip.ecc.bytes = 3;
+ }
+ info->chip.ecc.size = 512;
+ info->chip.ecc.strength = pdata->ecc_bits;
+ break;
+ default:
+ return -EINVAL;
+ }
+ info->chip.ecc.mode = ecc_mode;
+
+ info->clk = devm_clk_get(&pdev->dev, "aemif");
+ if (IS_ERR(info->clk)) {
+ ret = PTR_ERR(info->clk);
+ dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+ ret);
+ goto err_clk_enable;
+ }
+
+ spin_lock_irq(&davinci_nand_lock);
+
+ /* put CSxNAND into NAND mode */
+ val = davinci_nand_readl(info, NANDFCR_OFFSET);
+ val |= BIT(info->core_chipsel);
+ davinci_nand_writel(info, NANDFCR_OFFSET, val);
+
+ spin_unlock_irq(&davinci_nand_lock);
+
+ /* Scan to find existence of the device(s) */
+ ret = nand_scan_ident(&info->mtd, pdata->mask_chipsel ? 2 : 1, NULL);
+ if (ret < 0) {
+ dev_dbg(&pdev->dev, "no NAND chip(s) found\n");
+ goto err;
+ }
+
+ /* Update ECC layout if needed ... for 1-bit HW ECC, the default
+ * is OK, but it allocates 6 bytes when only 3 are needed (for
+ * each 512 bytes). For the 4-bit HW ECC, that default is not
+ * usable: 10 bytes are needed, not 6.
+ */
+ if (pdata->ecc_bits == 4) {
+ int chunks = info->mtd.writesize / 512;
+
+ if (!chunks || info->mtd.oobsize < 16) {
+ dev_dbg(&pdev->dev, "too small\n");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ /* For small page chips, preserve the manufacturer's
+ * badblock marking data ... and make sure a flash BBT
+ * table marker fits in the free bytes.
+ */
+ if (chunks == 1) {
+ info->ecclayout = hwecc4_small;
+ info->ecclayout.oobfree[1].length =
+ info->mtd.oobsize - 16;
+ goto syndrome_done;
+ }
+ if (chunks == 4) {
+ info->ecclayout = hwecc4_2048;
+ info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
+ goto syndrome_done;
+ }
+ if (chunks == 8) {
+ info->ecclayout = hwecc4_4096;
+ info->chip.ecc.mode = NAND_ECC_HW_OOB_FIRST;
+ goto syndrome_done;
+ }
+
+ ret = -EIO;
+ goto err;
+
+syndrome_done:
+ info->chip.ecc.layout = &info->ecclayout;
+ }
+
+ ret = nand_scan_tail(&info->mtd);
+ if (ret < 0)
+ goto err;
+
+ if (pdata->parts)
+ ret = mtd_device_parse_register(&info->mtd, NULL, NULL,
+ pdata->parts, pdata->nr_parts);
+ else {
+ struct mtd_part_parser_data ppdata;
+
+ ppdata.of_node = pdev->dev.of_node;
+ ret = mtd_device_parse_register(&info->mtd, NULL, &ppdata,
+ NULL, 0);
+ }
+ if (ret < 0)
+ goto err;
+
+ val = davinci_nand_readl(info, NRCSR_OFFSET);
+ dev_info(&pdev->dev, "controller rev. %d.%d\n",
+ (val >> 8) & 0xff, val & 0xff);
+
+ return 0;
+
+err:
+ clk_disable_unprepare(info->clk);
+
+err_clk_enable:
+ spin_lock_irq(&davinci_nand_lock);
+ if (ecc_mode == NAND_ECC_HW_SYNDROME)
+ ecc4_busy = false;
+ spin_unlock_irq(&davinci_nand_lock);
+ return ret;
+}
+
+static int nand_davinci_remove(struct platform_device *pdev)
+{
+ struct davinci_nand_info *info = platform_get_drvdata(pdev);
+
+ spin_lock_irq(&davinci_nand_lock);
+ if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
+ ecc4_busy = false;
+ spin_unlock_irq(&davinci_nand_lock);
+
+ nand_release(&info->mtd);
+
+ clk_disable_unprepare(info->clk);
+
+ return 0;
+}
+
+static struct platform_driver nand_davinci_driver = {
+ .probe = nand_davinci_probe,
+ .remove = nand_davinci_remove,
+ .driver = {
+ .name = "davinci_nand",
+ .of_match_table = of_match_ptr(davinci_nand_of_match),
+ },
+};
+MODULE_ALIAS("platform:davinci_nand");
+
+module_platform_driver(nand_davinci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_DESCRIPTION("Davinci NAND flash driver");
+
diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
new file mode 100644
index 0000000..67eb2be
--- /dev/null
+++ b/drivers/mtd/nand/denali.c
@@ -0,0 +1,1630 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright © 2009-2010, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/wait.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/module.h>
+
+#include "denali.h"
+
+MODULE_LICENSE("GPL");
+
+/*
+ * We define a module parameter that allows the user to override
+ * the hardware and decide what timing mode should be used.
+ */
+#define NAND_DEFAULT_TIMINGS -1
+
+static int onfi_timing_mode = NAND_DEFAULT_TIMINGS;
+module_param(onfi_timing_mode, int, S_IRUGO);
+MODULE_PARM_DESC(onfi_timing_mode,
+ "Overrides default ONFI setting. -1 indicates use default timings");
+
+#define DENALI_NAND_NAME "denali-nand"
+
+/*
+ * We define a macro here that combines all interrupts this driver uses into
+ * a single constant value, for convenience.
+ */
+#define DENALI_IRQ_ALL (INTR_STATUS__DMA_CMD_COMP | \
+ INTR_STATUS__ECC_TRANSACTION_DONE | \
+ INTR_STATUS__ECC_ERR | \
+ INTR_STATUS__PROGRAM_FAIL | \
+ INTR_STATUS__LOAD_COMP | \
+ INTR_STATUS__PROGRAM_COMP | \
+ INTR_STATUS__TIME_OUT | \
+ INTR_STATUS__ERASE_FAIL | \
+ INTR_STATUS__RST_COMP | \
+ INTR_STATUS__ERASE_COMP)
+
+/*
+ * indicates whether or not the internal value for the flash bank is
+ * valid or not
+ */
+#define CHIP_SELECT_INVALID -1
+
+#define SUPPORT_8BITECC 1
+
+/*
+ * This macro divides two integers and rounds fractional values up
+ * to the nearest integer value.
+ */
+#define CEIL_DIV(X, Y) (((X)%(Y)) ? ((X)/(Y)+1) : ((X)/(Y)))
+
+/*
+ * this macro allows us to convert from an MTD structure to our own
+ * device context (denali) structure.
+ */
+#define mtd_to_denali(m) container_of(m, struct denali_nand_info, mtd)
+
+/*
+ * These constants are defined by the driver to enable common driver
+ * configuration options.
+ */
+#define SPARE_ACCESS 0x41
+#define MAIN_ACCESS 0x42
+#define MAIN_SPARE_ACCESS 0x43
+#define PIPELINE_ACCESS 0x2000
+
+#define DENALI_READ 0
+#define DENALI_WRITE 0x100
+
+/* types of device accesses. We can issue commands and get status */
+#define COMMAND_CYCLE 0
+#define ADDR_CYCLE 1
+#define STATUS_CYCLE 2
+
+/*
+ * this is a helper macro that allows us to
+ * format the bank into the proper bits for the controller
+ */
+#define BANK(x) ((x) << 24)
+
+/* forward declarations */
+static void clear_interrupts(struct denali_nand_info *denali);
+static uint32_t wait_for_irq(struct denali_nand_info *denali,
+ uint32_t irq_mask);
+static void denali_irq_enable(struct denali_nand_info *denali,
+ uint32_t int_mask);
+static uint32_t read_interrupt_status(struct denali_nand_info *denali);
+
+/*
+ * Certain operations for the denali NAND controller use an indexed mode to
+ * read/write data. The operation is performed by writing the address value
+ * of the command to the device memory followed by the data. This function
+ * abstracts this common operation.
+ */
+static void index_addr(struct denali_nand_info *denali,
+ uint32_t address, uint32_t data)
+{
+ iowrite32(address, denali->flash_mem);
+ iowrite32(data, denali->flash_mem + 0x10);
+}
+
+/* Perform an indexed read of the device */
+static void index_addr_read_data(struct denali_nand_info *denali,
+ uint32_t address, uint32_t *pdata)
+{
+ iowrite32(address, denali->flash_mem);
+ *pdata = ioread32(denali->flash_mem + 0x10);
+}
+
+/*
+ * We need to buffer some data for some of the NAND core routines.
+ * The operations manage buffering that data.
+ */
+static void reset_buf(struct denali_nand_info *denali)
+{
+ denali->buf.head = denali->buf.tail = 0;
+}
+
+static void write_byte_to_buf(struct denali_nand_info *denali, uint8_t byte)
+{
+ denali->buf.buf[denali->buf.tail++] = byte;
+}
+
+/* reads the status of the device */
+static void read_status(struct denali_nand_info *denali)
+{
+ uint32_t cmd;
+
+ /* initialize the data buffer to store status */
+ reset_buf(denali);
+
+ cmd = ioread32(denali->flash_reg + WRITE_PROTECT);
+ if (cmd)
+ write_byte_to_buf(denali, NAND_STATUS_WP);
+ else
+ write_byte_to_buf(denali, 0);
+}
+
+/* resets a specific device connected to the core */
+static void reset_bank(struct denali_nand_info *denali)
+{
+ uint32_t irq_status;
+ uint32_t irq_mask = INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT;
+
+ clear_interrupts(denali);
+
+ iowrite32(1 << denali->flash_bank, denali->flash_reg + DEVICE_RESET);
+
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ if (irq_status & INTR_STATUS__TIME_OUT)
+ dev_err(denali->dev, "reset bank failed.\n");
+}
+
+/* Reset the flash controller */
+static uint16_t denali_nand_reset(struct denali_nand_info *denali)
+{
+ int i;
+
+ dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ for (i = 0; i < denali->max_banks; i++)
+ iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
+ denali->flash_reg + INTR_STATUS(i));
+
+ for (i = 0; i < denali->max_banks; i++) {
+ iowrite32(1 << i, denali->flash_reg + DEVICE_RESET);
+ while (!(ioread32(denali->flash_reg + INTR_STATUS(i)) &
+ (INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT)))
+ cpu_relax();
+ if (ioread32(denali->flash_reg + INTR_STATUS(i)) &
+ INTR_STATUS__TIME_OUT)
+ dev_dbg(denali->dev,
+ "NAND Reset operation timed out on bank %d\n", i);
+ }
+
+ for (i = 0; i < denali->max_banks; i++)
+ iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
+ denali->flash_reg + INTR_STATUS(i));
+
+ return PASS;
+}
+
+/*
+ * this routine calculates the ONFI timing values for a given mode and
+ * programs the clocking register accordingly. The mode is determined by
+ * the get_onfi_nand_para routine.
+ */
+static void nand_onfi_timing_set(struct denali_nand_info *denali,
+ uint16_t mode)
+{
+ uint16_t Trea[6] = {40, 30, 25, 20, 20, 16};
+ uint16_t Trp[6] = {50, 25, 17, 15, 12, 10};
+ uint16_t Treh[6] = {30, 15, 15, 10, 10, 7};
+ uint16_t Trc[6] = {100, 50, 35, 30, 25, 20};
+ uint16_t Trhoh[6] = {0, 15, 15, 15, 15, 15};
+ uint16_t Trloh[6] = {0, 0, 0, 0, 5, 5};
+ uint16_t Tcea[6] = {100, 45, 30, 25, 25, 25};
+ uint16_t Tadl[6] = {200, 100, 100, 100, 70, 70};
+ uint16_t Trhw[6] = {200, 100, 100, 100, 100, 100};
+ uint16_t Trhz[6] = {200, 100, 100, 100, 100, 100};
+ uint16_t Twhr[6] = {120, 80, 80, 60, 60, 60};
+ uint16_t Tcs[6] = {70, 35, 25, 25, 20, 15};
+
+ uint16_t data_invalid_rhoh, data_invalid_rloh, data_invalid;
+ uint16_t dv_window = 0;
+ uint16_t en_lo, en_hi;
+ uint16_t acc_clks;
+ uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
+
+ dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ en_lo = CEIL_DIV(Trp[mode], CLK_X);
+ en_hi = CEIL_DIV(Treh[mode], CLK_X);
+#if ONFI_BLOOM_TIME
+ if ((en_hi * CLK_X) < (Treh[mode] + 2))
+ en_hi++;
+#endif
+
+ if ((en_lo + en_hi) * CLK_X < Trc[mode])
+ en_lo += CEIL_DIV((Trc[mode] - (en_lo + en_hi) * CLK_X), CLK_X);
+
+ if ((en_lo + en_hi) < CLK_MULTI)
+ en_lo += CLK_MULTI - en_lo - en_hi;
+
+ while (dv_window < 8) {
+ data_invalid_rhoh = en_lo * CLK_X + Trhoh[mode];
+
+ data_invalid_rloh = (en_lo + en_hi) * CLK_X + Trloh[mode];
+
+ data_invalid = data_invalid_rhoh < data_invalid_rloh ?
+ data_invalid_rhoh : data_invalid_rloh;
+
+ dv_window = data_invalid - Trea[mode];
+
+ if (dv_window < 8)
+ en_lo++;
+ }
+
+ acc_clks = CEIL_DIV(Trea[mode], CLK_X);
+
+ while (acc_clks * CLK_X - Trea[mode] < 3)
+ acc_clks++;
+
+ if (data_invalid - acc_clks * CLK_X < 2)
+ dev_warn(denali->dev, "%s, Line %d: Warning!\n",
+ __FILE__, __LINE__);
+
+ addr_2_data = CEIL_DIV(Tadl[mode], CLK_X);
+ re_2_we = CEIL_DIV(Trhw[mode], CLK_X);
+ re_2_re = CEIL_DIV(Trhz[mode], CLK_X);
+ we_2_re = CEIL_DIV(Twhr[mode], CLK_X);
+ cs_cnt = CEIL_DIV((Tcs[mode] - Trp[mode]), CLK_X);
+ if (cs_cnt == 0)
+ cs_cnt = 1;
+
+ if (Tcea[mode]) {
+ while (cs_cnt * CLK_X + Trea[mode] < Tcea[mode])
+ cs_cnt++;
+ }
+
+#if MODE5_WORKAROUND
+ if (mode == 5)
+ acc_clks = 5;
+#endif
+
+ /* Sighting 3462430: Temporary hack for MT29F128G08CJABAWP:B */
+ if (ioread32(denali->flash_reg + MANUFACTURER_ID) == 0 &&
+ ioread32(denali->flash_reg + DEVICE_ID) == 0x88)
+ acc_clks = 6;
+
+ iowrite32(acc_clks, denali->flash_reg + ACC_CLKS);
+ iowrite32(re_2_we, denali->flash_reg + RE_2_WE);
+ iowrite32(re_2_re, denali->flash_reg + RE_2_RE);
+ iowrite32(we_2_re, denali->flash_reg + WE_2_RE);
+ iowrite32(addr_2_data, denali->flash_reg + ADDR_2_DATA);
+ iowrite32(en_lo, denali->flash_reg + RDWR_EN_LO_CNT);
+ iowrite32(en_hi, denali->flash_reg + RDWR_EN_HI_CNT);
+ iowrite32(cs_cnt, denali->flash_reg + CS_SETUP_CNT);
+}
+
+/* queries the NAND device to see what ONFI modes it supports. */
+static uint16_t get_onfi_nand_para(struct denali_nand_info *denali)
+{
+ int i;
+
+ /*
+ * we needn't to do a reset here because driver has already
+ * reset all the banks before
+ */
+ if (!(ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
+ ONFI_TIMING_MODE__VALUE))
+ return FAIL;
+
+ for (i = 5; i > 0; i--) {
+ if (ioread32(denali->flash_reg + ONFI_TIMING_MODE) &
+ (0x01 << i))
+ break;
+ }
+
+ nand_onfi_timing_set(denali, i);
+
+ /*
+ * By now, all the ONFI devices we know support the page cache
+ * rw feature. So here we enable the pipeline_rw_ahead feature
+ */
+ /* iowrite32(1, denali->flash_reg + CACHE_WRITE_ENABLE); */
+ /* iowrite32(1, denali->flash_reg + CACHE_READ_ENABLE); */
+
+ return PASS;
+}
+
+static void get_samsung_nand_para(struct denali_nand_info *denali,
+ uint8_t device_id)
+{
+ if (device_id == 0xd3) { /* Samsung K9WAG08U1A */
+ /* Set timing register values according to datasheet */
+ iowrite32(5, denali->flash_reg + ACC_CLKS);
+ iowrite32(20, denali->flash_reg + RE_2_WE);
+ iowrite32(12, denali->flash_reg + WE_2_RE);
+ iowrite32(14, denali->flash_reg + ADDR_2_DATA);
+ iowrite32(3, denali->flash_reg + RDWR_EN_LO_CNT);
+ iowrite32(2, denali->flash_reg + RDWR_EN_HI_CNT);
+ iowrite32(2, denali->flash_reg + CS_SETUP_CNT);
+ }
+}
+
+static void get_toshiba_nand_para(struct denali_nand_info *denali)
+{
+ uint32_t tmp;
+
+ /*
+ * Workaround to fix a controller bug which reports a wrong
+ * spare area size for some kind of Toshiba NAND device
+ */
+ if ((ioread32(denali->flash_reg + DEVICE_MAIN_AREA_SIZE) == 4096) &&
+ (ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE) == 64)) {
+ iowrite32(216, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ tmp = ioread32(denali->flash_reg + DEVICES_CONNECTED) *
+ ioread32(denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ iowrite32(tmp,
+ denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+#if SUPPORT_15BITECC
+ iowrite32(15, denali->flash_reg + ECC_CORRECTION);
+#elif SUPPORT_8BITECC
+ iowrite32(8, denali->flash_reg + ECC_CORRECTION);
+#endif
+ }
+}
+
+static void get_hynix_nand_para(struct denali_nand_info *denali,
+ uint8_t device_id)
+{
+ uint32_t main_size, spare_size;
+
+ switch (device_id) {
+ case 0xD5: /* Hynix H27UAG8T2A, H27UBG8U5A or H27UCG8VFA */
+ case 0xD7: /* Hynix H27UDG8VEM, H27UCG8UDM or H27UCG8V5A */
+ iowrite32(128, denali->flash_reg + PAGES_PER_BLOCK);
+ iowrite32(4096, denali->flash_reg + DEVICE_MAIN_AREA_SIZE);
+ iowrite32(224, denali->flash_reg + DEVICE_SPARE_AREA_SIZE);
+ main_size = 4096 *
+ ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ spare_size = 224 *
+ ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ iowrite32(main_size,
+ denali->flash_reg + LOGICAL_PAGE_DATA_SIZE);
+ iowrite32(spare_size,
+ denali->flash_reg + LOGICAL_PAGE_SPARE_SIZE);
+ iowrite32(0, denali->flash_reg + DEVICE_WIDTH);
+#if SUPPORT_15BITECC
+ iowrite32(15, denali->flash_reg + ECC_CORRECTION);
+#elif SUPPORT_8BITECC
+ iowrite32(8, denali->flash_reg + ECC_CORRECTION);
+#endif
+ break;
+ default:
+ dev_warn(denali->dev,
+ "Spectra: Unknown Hynix NAND (Device ID: 0x%x).\n"
+ "Will use default parameter values instead.\n",
+ device_id);
+ }
+}
+
+/*
+ * determines how many NAND chips are connected to the controller. Note for
+ * Intel CE4100 devices we don't support more than one device.
+ */
+static void find_valid_banks(struct denali_nand_info *denali)
+{
+ uint32_t id[denali->max_banks];
+ int i;
+
+ denali->total_used_banks = 1;
+ for (i = 0; i < denali->max_banks; i++) {
+ index_addr(denali, MODE_11 | (i << 24) | 0, 0x90);
+ index_addr(denali, MODE_11 | (i << 24) | 1, 0);
+ index_addr_read_data(denali, MODE_11 | (i << 24) | 2, &id[i]);
+
+ dev_dbg(denali->dev,
+ "Return 1st ID for bank[%d]: %x\n", i, id[i]);
+
+ if (i == 0) {
+ if (!(id[i] & 0x0ff))
+ break; /* WTF? */
+ } else {
+ if ((id[i] & 0x0ff) == (id[0] & 0x0ff))
+ denali->total_used_banks++;
+ else
+ break;
+ }
+ }
+
+ if (denali->platform == INTEL_CE4100) {
+ /*
+ * Platform limitations of the CE4100 device limit
+ * users to a single chip solution for NAND.
+ * Multichip support is not enabled.
+ */
+ if (denali->total_used_banks != 1) {
+ dev_err(denali->dev,
+ "Sorry, Intel CE4100 only supports a single NAND device.\n");
+ BUG();
+ }
+ }
+ dev_dbg(denali->dev,
+ "denali->total_used_banks: %d\n", denali->total_used_banks);
+}
+
+/*
+ * Use the configuration feature register to determine the maximum number of
+ * banks that the hardware supports.
+ */
+static void detect_max_banks(struct denali_nand_info *denali)
+{
+ uint32_t features = ioread32(denali->flash_reg + FEATURES);
+ /*
+ * Read the revision register, so we can calculate the max_banks
+ * properly: the encoding changed from rev 5.0 to 5.1
+ */
+ u32 revision = MAKE_COMPARABLE_REVISION(
+ ioread32(denali->flash_reg + REVISION));
+
+ if (revision < REVISION_5_1)
+ denali->max_banks = 2 << (features & FEATURES__N_BANKS);
+ else
+ denali->max_banks = 1 << (features & FEATURES__N_BANKS);
+}
+
+static void detect_partition_feature(struct denali_nand_info *denali)
+{
+ /*
+ * For MRST platform, denali->fwblks represent the
+ * number of blocks firmware is taken,
+ * FW is in protect partition and MTD driver has no
+ * permission to access it. So let driver know how many
+ * blocks it can't touch.
+ */
+ if (ioread32(denali->flash_reg + FEATURES) & FEATURES__PARTITION) {
+ if ((ioread32(denali->flash_reg + PERM_SRC_ID(1)) &
+ PERM_SRC_ID__SRCID) == SPECTRA_PARTITION_ID) {
+ denali->fwblks =
+ ((ioread32(denali->flash_reg + MIN_MAX_BANK(1)) &
+ MIN_MAX_BANK__MIN_VALUE) *
+ denali->blksperchip)
+ +
+ (ioread32(denali->flash_reg + MIN_BLK_ADDR(1)) &
+ MIN_BLK_ADDR__VALUE);
+ } else {
+ denali->fwblks = SPECTRA_START_BLOCK;
+ }
+ } else {
+ denali->fwblks = SPECTRA_START_BLOCK;
+ }
+}
+
+static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
+{
+ uint16_t status = PASS;
+ uint32_t id_bytes[8], addr;
+ uint8_t maf_id, device_id;
+ int i;
+
+ dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ /*
+ * Use read id method to get device ID and other params.
+ * For some NAND chips, controller can't report the correct
+ * device ID by reading from DEVICE_ID register
+ */
+ addr = MODE_11 | BANK(denali->flash_bank);
+ index_addr(denali, addr | 0, 0x90);
+ index_addr(denali, addr | 1, 0);
+ for (i = 0; i < 8; i++)
+ index_addr_read_data(denali, addr | 2, &id_bytes[i]);
+ maf_id = id_bytes[0];
+ device_id = id_bytes[1];
+
+ if (ioread32(denali->flash_reg + ONFI_DEVICE_NO_OF_LUNS) &
+ ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE) { /* ONFI 1.0 NAND */
+ if (FAIL == get_onfi_nand_para(denali))
+ return FAIL;
+ } else if (maf_id == 0xEC) { /* Samsung NAND */
+ get_samsung_nand_para(denali, device_id);
+ } else if (maf_id == 0x98) { /* Toshiba NAND */
+ get_toshiba_nand_para(denali);
+ } else if (maf_id == 0xAD) { /* Hynix NAND */
+ get_hynix_nand_para(denali, device_id);
+ }
+
+ dev_info(denali->dev,
+ "Dump timing register values:\n"
+ "acc_clks: %d, re_2_we: %d, re_2_re: %d\n"
+ "we_2_re: %d, addr_2_data: %d, rdwr_en_lo_cnt: %d\n"
+ "rdwr_en_hi_cnt: %d, cs_setup_cnt: %d\n",
+ ioread32(denali->flash_reg + ACC_CLKS),
+ ioread32(denali->flash_reg + RE_2_WE),
+ ioread32(denali->flash_reg + RE_2_RE),
+ ioread32(denali->flash_reg + WE_2_RE),
+ ioread32(denali->flash_reg + ADDR_2_DATA),
+ ioread32(denali->flash_reg + RDWR_EN_LO_CNT),
+ ioread32(denali->flash_reg + RDWR_EN_HI_CNT),
+ ioread32(denali->flash_reg + CS_SETUP_CNT));
+
+ find_valid_banks(denali);
+
+ detect_partition_feature(denali);
+
+ /*
+ * If the user specified to override the default timings
+ * with a specific ONFI mode, we apply those changes here.
+ */
+ if (onfi_timing_mode != NAND_DEFAULT_TIMINGS)
+ nand_onfi_timing_set(denali, onfi_timing_mode);
+
+ return status;
+}
+
+static void denali_set_intr_modes(struct denali_nand_info *denali,
+ uint16_t INT_ENABLE)
+{
+ dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
+ __FILE__, __LINE__, __func__);
+
+ if (INT_ENABLE)
+ iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
+ else
+ iowrite32(0, denali->flash_reg + GLOBAL_INT_ENABLE);
+}
+
+/*
+ * validation function to verify that the controlling software is making
+ * a valid request
+ */
+static inline bool is_flash_bank_valid(int flash_bank)
+{
+ return flash_bank >= 0 && flash_bank < 4;
+}
+
+static void denali_irq_init(struct denali_nand_info *denali)
+{
+ uint32_t int_mask;
+ int i;
+
+ /* Disable global interrupts */
+ denali_set_intr_modes(denali, false);
+
+ int_mask = DENALI_IRQ_ALL;
+
+ /* Clear all status bits */
+ for (i = 0; i < denali->max_banks; ++i)
+ iowrite32(0xFFFF, denali->flash_reg + INTR_STATUS(i));
+
+ denali_irq_enable(denali, int_mask);
+}
+
+static void denali_irq_cleanup(int irqnum, struct denali_nand_info *denali)
+{
+ denali_set_intr_modes(denali, false);
+ free_irq(irqnum, denali);
+}
+
+static void denali_irq_enable(struct denali_nand_info *denali,
+ uint32_t int_mask)
+{
+ int i;
+
+ for (i = 0; i < denali->max_banks; ++i)
+ iowrite32(int_mask, denali->flash_reg + INTR_EN(i));
+}
+
+/*
+ * This function only returns when an interrupt that this driver cares about
+ * occurs. This is to reduce the overhead of servicing interrupts
+ */
+static inline uint32_t denali_irq_detected(struct denali_nand_info *denali)
+{
+ return read_interrupt_status(denali) & DENALI_IRQ_ALL;
+}
+
+/* Interrupts are cleared by writing a 1 to the appropriate status bit */
+static inline void clear_interrupt(struct denali_nand_info *denali,
+ uint32_t irq_mask)
+{
+ uint32_t intr_status_reg;
+
+ intr_status_reg = INTR_STATUS(denali->flash_bank);
+
+ iowrite32(irq_mask, denali->flash_reg + intr_status_reg);
+}
+
+static void clear_interrupts(struct denali_nand_info *denali)
+{
+ uint32_t status;
+
+ spin_lock_irq(&denali->irq_lock);
+
+ status = read_interrupt_status(denali);
+ clear_interrupt(denali, status);
+
+ denali->irq_status = 0x0;
+ spin_unlock_irq(&denali->irq_lock);
+}
+
+static uint32_t read_interrupt_status(struct denali_nand_info *denali)
+{
+ uint32_t intr_status_reg;
+
+ intr_status_reg = INTR_STATUS(denali->flash_bank);
+
+ return ioread32(denali->flash_reg + intr_status_reg);
+}
+
+/*
+ * This is the interrupt service routine. It handles all interrupts
+ * sent to this device. Note that on CE4100, this is a shared interrupt.
+ */
+static irqreturn_t denali_isr(int irq, void *dev_id)
+{
+ struct denali_nand_info *denali = dev_id;
+ uint32_t irq_status;
+ irqreturn_t result = IRQ_NONE;
+
+ spin_lock(&denali->irq_lock);
+
+ /* check to see if a valid NAND chip has been selected. */
+ if (is_flash_bank_valid(denali->flash_bank)) {
+ /*
+ * check to see if controller generated the interrupt,
+ * since this is a shared interrupt
+ */
+ irq_status = denali_irq_detected(denali);
+ if (irq_status != 0) {
+ /* handle interrupt */
+ /* first acknowledge it */
+ clear_interrupt(denali, irq_status);
+ /*
+ * store the status in the device context for someone
+ * to read
+ */
+ denali->irq_status |= irq_status;
+ /* notify anyone who cares that it happened */
+ complete(&denali->complete);
+ /* tell the OS that we've handled this */
+ result = IRQ_HANDLED;
+ }
+ }
+ spin_unlock(&denali->irq_lock);
+ return result;
+}
+#define BANK(x) ((x) << 24)
+
+static uint32_t wait_for_irq(struct denali_nand_info *denali, uint32_t irq_mask)
+{
+ unsigned long comp_res;
+ uint32_t intr_status;
+ unsigned long timeout = msecs_to_jiffies(1000);
+
+ do {
+ comp_res =
+ wait_for_completion_timeout(&denali->complete, timeout);
+ spin_lock_irq(&denali->irq_lock);
+ intr_status = denali->irq_status;
+
+ if (intr_status & irq_mask) {
+ denali->irq_status &= ~irq_mask;
+ spin_unlock_irq(&denali->irq_lock);
+ /* our interrupt was detected */
+ break;
+ }
+
+ /*
+ * these are not the interrupts you are looking for -
+ * need to wait again
+ */
+ spin_unlock_irq(&denali->irq_lock);
+ } while (comp_res != 0);
+
+ if (comp_res == 0) {
+ /* timeout */
+ pr_err("timeout occurred, status = 0x%x, mask = 0x%x\n",
+ intr_status, irq_mask);
+
+ intr_status = 0;
+ }
+ return intr_status;
+}
+
+/*
+ * This helper function setups the registers for ECC and whether or not
+ * the spare area will be transferred.
+ */
+static void setup_ecc_for_xfer(struct denali_nand_info *denali, bool ecc_en,
+ bool transfer_spare)
+{
+ int ecc_en_flag, transfer_spare_flag;
+
+ /* set ECC, transfer spare bits if needed */
+ ecc_en_flag = ecc_en ? ECC_ENABLE__FLAG : 0;
+ transfer_spare_flag = transfer_spare ? TRANSFER_SPARE_REG__FLAG : 0;
+
+ /* Enable spare area/ECC per user's request. */
+ iowrite32(ecc_en_flag, denali->flash_reg + ECC_ENABLE);
+ iowrite32(transfer_spare_flag, denali->flash_reg + TRANSFER_SPARE_REG);
+}
+
+/*
+ * sends a pipeline command operation to the controller. See the Denali NAND
+ * controller's user guide for more information (section 4.2.3.6).
+ */
+static int denali_send_pipeline_cmd(struct denali_nand_info *denali,
+ bool ecc_en, bool transfer_spare,
+ int access_type, int op)
+{
+ int status = PASS;
+ uint32_t page_count = 1;
+ uint32_t addr, cmd, irq_status, irq_mask;
+
+ if (op == DENALI_READ)
+ irq_mask = INTR_STATUS__LOAD_COMP;
+ else if (op == DENALI_WRITE)
+ irq_mask = 0;
+ else
+ BUG();
+
+ setup_ecc_for_xfer(denali, ecc_en, transfer_spare);
+
+ clear_interrupts(denali);
+
+ addr = BANK(denali->flash_bank) | denali->page;
+
+ if (op == DENALI_WRITE && access_type != SPARE_ACCESS) {
+ cmd = MODE_01 | addr;
+ iowrite32(cmd, denali->flash_mem);
+ } else if (op == DENALI_WRITE && access_type == SPARE_ACCESS) {
+ /* read spare area */
+ cmd = MODE_10 | addr;
+ index_addr(denali, cmd, access_type);
+
+ cmd = MODE_01 | addr;
+ iowrite32(cmd, denali->flash_mem);
+ } else if (op == DENALI_READ) {
+ /* setup page read request for access type */
+ cmd = MODE_10 | addr;
+ index_addr(denali, cmd, access_type);
+
+ /*
+ * page 33 of the NAND controller spec indicates we should not
+ * use the pipeline commands in Spare area only mode.
+ * So we don't.
+ */
+ if (access_type == SPARE_ACCESS) {
+ cmd = MODE_01 | addr;
+ iowrite32(cmd, denali->flash_mem);
+ } else {
+ index_addr(denali, cmd,
+ PIPELINE_ACCESS | op | page_count);
+
+ /*
+ * wait for command to be accepted
+ * can always use status0 bit as the
+ * mask is identical for each bank.
+ */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ if (irq_status == 0) {
+ dev_err(denali->dev,
+ "cmd, page, addr on timeout (0x%x, 0x%x, 0x%x)\n",
+ cmd, denali->page, addr);
+ status = FAIL;
+ } else {
+ cmd = MODE_01 | addr;
+ iowrite32(cmd, denali->flash_mem);
+ }
+ }
+ }
+ return status;
+}
+
+/* helper function that simply writes a buffer to the flash */
+static int write_data_to_flash_mem(struct denali_nand_info *denali,
+ const uint8_t *buf, int len)
+{
+ uint32_t *buf32;
+ int i;
+
+ /*
+ * verify that the len is a multiple of 4.
+ * see comment in read_data_from_flash_mem()
+ */
+ BUG_ON((len % 4) != 0);
+
+ /* write the data to the flash memory */
+ buf32 = (uint32_t *)buf;
+ for (i = 0; i < len / 4; i++)
+ iowrite32(*buf32++, denali->flash_mem + 0x10);
+ return i * 4; /* intent is to return the number of bytes read */
+}
+
+/* helper function that simply reads a buffer from the flash */
+static int read_data_from_flash_mem(struct denali_nand_info *denali,
+ uint8_t *buf, int len)
+{
+ uint32_t *buf32;
+ int i;
+
+ /*
+ * we assume that len will be a multiple of 4, if not it would be nice
+ * to know about it ASAP rather than have random failures...
+ * This assumption is based on the fact that this function is designed
+ * to be used to read flash pages, which are typically multiples of 4.
+ */
+ BUG_ON((len % 4) != 0);
+
+ /* transfer the data from the flash */
+ buf32 = (uint32_t *)buf;
+ for (i = 0; i < len / 4; i++)
+ *buf32++ = ioread32(denali->flash_mem + 0x10);
+ return i * 4; /* intent is to return the number of bytes read */
+}
+
+/* writes OOB data to the device */
+static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint32_t irq_status;
+ uint32_t irq_mask = INTR_STATUS__PROGRAM_COMP |
+ INTR_STATUS__PROGRAM_FAIL;
+ int status = 0;
+
+ denali->page = page;
+
+ if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS,
+ DENALI_WRITE) == PASS) {
+ write_data_to_flash_mem(denali, buf, mtd->oobsize);
+
+ /* wait for operation to complete */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ if (irq_status == 0) {
+ dev_err(denali->dev, "OOB write failed\n");
+ status = -EIO;
+ }
+ } else {
+ dev_err(denali->dev, "unable to send pipeline command\n");
+ status = -EIO;
+ }
+ return status;
+}
+
+/* reads OOB data from the device */
+static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint32_t irq_mask = INTR_STATUS__LOAD_COMP;
+ uint32_t irq_status, addr, cmd;
+
+ denali->page = page;
+
+ if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS,
+ DENALI_READ) == PASS) {
+ read_data_from_flash_mem(denali, buf, mtd->oobsize);
+
+ /*
+ * wait for command to be accepted
+ * can always use status0 bit as the
+ * mask is identical for each bank.
+ */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ if (irq_status == 0)
+ dev_err(denali->dev, "page on OOB timeout %d\n",
+ denali->page);
+
+ /*
+ * We set the device back to MAIN_ACCESS here as I observed
+ * instability with the controller if you do a block erase
+ * and the last transaction was a SPARE_ACCESS. Block erase
+ * is reliable (according to the MTD test infrastructure)
+ * if you are in MAIN_ACCESS.
+ */
+ addr = BANK(denali->flash_bank) | denali->page;
+ cmd = MODE_10 | addr;
+ index_addr(denali, cmd, MAIN_ACCESS);
+ }
+}
+
+/*
+ * this function examines buffers to see if they contain data that
+ * indicate that the buffer is part of an erased region of flash.
+ */
+static bool is_erased(uint8_t *buf, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++)
+ if (buf[i] != 0xFF)
+ return false;
+ return true;
+}
+#define ECC_SECTOR_SIZE 512
+
+#define ECC_SECTOR(x) (((x) & ECC_ERROR_ADDRESS__SECTOR_NR) >> 12)
+#define ECC_BYTE(x) (((x) & ECC_ERROR_ADDRESS__OFFSET))
+#define ECC_CORRECTION_VALUE(x) ((x) & ERR_CORRECTION_INFO__BYTEMASK)
+#define ECC_ERROR_CORRECTABLE(x) (!((x) & ERR_CORRECTION_INFO__ERROR_TYPE))
+#define ECC_ERR_DEVICE(x) (((x) & ERR_CORRECTION_INFO__DEVICE_NR) >> 8)
+#define ECC_LAST_ERR(x) ((x) & ERR_CORRECTION_INFO__LAST_ERR_INFO)
+
+static bool handle_ecc(struct denali_nand_info *denali, uint8_t *buf,
+ uint32_t irq_status, unsigned int *max_bitflips)
+{
+ bool check_erased_page = false;
+ unsigned int bitflips = 0;
+
+ if (irq_status & INTR_STATUS__ECC_ERR) {
+ /* read the ECC errors. we'll ignore them for now */
+ uint32_t err_address, err_correction_info, err_byte,
+ err_sector, err_device, err_correction_value;
+ denali_set_intr_modes(denali, false);
+
+ do {
+ err_address = ioread32(denali->flash_reg +
+ ECC_ERROR_ADDRESS);
+ err_sector = ECC_SECTOR(err_address);
+ err_byte = ECC_BYTE(err_address);
+
+ err_correction_info = ioread32(denali->flash_reg +
+ ERR_CORRECTION_INFO);
+ err_correction_value =
+ ECC_CORRECTION_VALUE(err_correction_info);
+ err_device = ECC_ERR_DEVICE(err_correction_info);
+
+ if (ECC_ERROR_CORRECTABLE(err_correction_info)) {
+ /*
+ * If err_byte is larger than ECC_SECTOR_SIZE,
+ * means error happened in OOB, so we ignore
+ * it. It's no need for us to correct it
+ * err_device is represented the NAND error
+ * bits are happened in if there are more
+ * than one NAND connected.
+ */
+ if (err_byte < ECC_SECTOR_SIZE) {
+ int offset;
+
+ offset = (err_sector *
+ ECC_SECTOR_SIZE +
+ err_byte) *
+ denali->devnum +
+ err_device;
+ /* correct the ECC error */
+ buf[offset] ^= err_correction_value;
+ denali->mtd.ecc_stats.corrected++;
+ bitflips++;
+ }
+ } else {
+ /*
+ * if the error is not correctable, need to
+ * look at the page to see if it is an erased
+ * page. if so, then it's not a real ECC error
+ */
+ check_erased_page = true;
+ }
+ } while (!ECC_LAST_ERR(err_correction_info));
+ /*
+ * Once handle all ecc errors, controller will triger
+ * a ECC_TRANSACTION_DONE interrupt, so here just wait
+ * for a while for this interrupt
+ */
+ while (!(read_interrupt_status(denali) &
+ INTR_STATUS__ECC_TRANSACTION_DONE))
+ cpu_relax();
+ clear_interrupts(denali);
+ denali_set_intr_modes(denali, true);
+ }
+ *max_bitflips = bitflips;
+ return check_erased_page;
+}
+
+/* programs the controller to either enable/disable DMA transfers */
+static void denali_enable_dma(struct denali_nand_info *denali, bool en)
+{
+ iowrite32(en ? DMA_ENABLE__FLAG : 0, denali->flash_reg + DMA_ENABLE);
+ ioread32(denali->flash_reg + DMA_ENABLE);
+}
+
+/* setups the HW to perform the data DMA */
+static void denali_setup_dma(struct denali_nand_info *denali, int op)
+{
+ uint32_t mode;
+ const int page_count = 1;
+ uint32_t addr = denali->buf.dma_buf;
+
+ mode = MODE_10 | BANK(denali->flash_bank);
+
+ /* DMA is a four step process */
+
+ /* 1. setup transfer type and # of pages */
+ index_addr(denali, mode | denali->page, 0x2000 | op | page_count);
+
+ /* 2. set memory high address bits 23:8 */
+ index_addr(denali, mode | ((addr >> 16) << 8), 0x2200);
+
+ /* 3. set memory low address bits 23:8 */
+ index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300);
+
+ /* 4. interrupt when complete, burst len = 64 bytes */
+ index_addr(denali, mode | 0x14000, 0x2400);
+}
+
+/*
+ * writes a page. user specifies type, and this function handles the
+ * configuration details.
+ */
+static int write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, bool raw_xfer)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dma_addr_t addr = denali->buf.dma_buf;
+ size_t size = denali->mtd.writesize + denali->mtd.oobsize;
+ uint32_t irq_status;
+ uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP |
+ INTR_STATUS__PROGRAM_FAIL;
+
+ /*
+ * if it is a raw xfer, we want to disable ecc and send the spare area.
+ * !raw_xfer - enable ecc
+ * raw_xfer - transfer spare
+ */
+ setup_ecc_for_xfer(denali, !raw_xfer, raw_xfer);
+
+ /* copy buffer into DMA buffer */
+ memcpy(denali->buf.buf, buf, mtd->writesize);
+
+ if (raw_xfer) {
+ /* transfer the data to the spare area */
+ memcpy(denali->buf.buf + mtd->writesize,
+ chip->oob_poi,
+ mtd->oobsize);
+ }
+
+ dma_sync_single_for_device(denali->dev, addr, size, DMA_TO_DEVICE);
+
+ clear_interrupts(denali);
+ denali_enable_dma(denali, true);
+
+ denali_setup_dma(denali, DENALI_WRITE);
+
+ /* wait for operation to complete */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ if (irq_status == 0) {
+ dev_err(denali->dev, "timeout on write_page (type = %d)\n",
+ raw_xfer);
+ denali->status = NAND_STATUS_FAIL;
+ }
+
+ denali_enable_dma(denali, false);
+ dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE);
+
+ return 0;
+}
+
+/* NAND core entry points */
+
+/*
+ * this is the callback that the NAND core calls to write a page. Since
+ * writing a page with ECC or without is similar, all the work is done
+ * by write_page above.
+ */
+static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
+{
+ /*
+ * for regular page writes, we let HW handle all the ECC
+ * data written to the device.
+ */
+ return write_page(mtd, chip, buf, false);
+}
+
+/*
+ * This is the callback that the NAND core calls to write a page without ECC.
+ * raw access is similar to ECC page writes, so all the work is done in the
+ * write_page() function above.
+ */
+static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ /*
+ * for raw page writes, we want to disable ECC and simply write
+ * whatever data is in the buffer.
+ */
+ return write_page(mtd, chip, buf, true);
+}
+
+static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ return write_oob_data(mtd, chip->oob_poi, page);
+}
+
+static int denali_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ read_oob_data(mtd, chip->oob_poi, page);
+
+ return 0;
+}
+
+static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ unsigned int max_bitflips;
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+
+ dma_addr_t addr = denali->buf.dma_buf;
+ size_t size = denali->mtd.writesize + denali->mtd.oobsize;
+
+ uint32_t irq_status;
+ uint32_t irq_mask = INTR_STATUS__ECC_TRANSACTION_DONE |
+ INTR_STATUS__ECC_ERR;
+ bool check_erased_page = false;
+
+ if (page != denali->page) {
+ dev_err(denali->dev,
+ "IN %s: page %d is not equal to denali->page %d",
+ __func__, page, denali->page);
+ BUG();
+ }
+
+ setup_ecc_for_xfer(denali, true, false);
+
+ denali_enable_dma(denali, true);
+ dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
+
+ clear_interrupts(denali);
+ denali_setup_dma(denali, DENALI_READ);
+
+ /* wait for operation to complete */
+ irq_status = wait_for_irq(denali, irq_mask);
+
+ dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
+
+ memcpy(buf, denali->buf.buf, mtd->writesize);
+
+ check_erased_page = handle_ecc(denali, buf, irq_status, &max_bitflips);
+ denali_enable_dma(denali, false);
+
+ if (check_erased_page) {
+ read_oob_data(&denali->mtd, chip->oob_poi, denali->page);
+
+ /* check ECC failures that may have occurred on erased pages */
+ if (check_erased_page) {
+ if (!is_erased(buf, denali->mtd.writesize))
+ denali->mtd.ecc_stats.failed++;
+ if (!is_erased(buf, denali->mtd.oobsize))
+ denali->mtd.ecc_stats.failed++;
+ }
+ }
+ return max_bitflips;
+}
+
+static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ dma_addr_t addr = denali->buf.dma_buf;
+ size_t size = denali->mtd.writesize + denali->mtd.oobsize;
+ uint32_t irq_mask = INTR_STATUS__DMA_CMD_COMP;
+
+ if (page != denali->page) {
+ dev_err(denali->dev,
+ "IN %s: page %d is not equal to denali->page %d",
+ __func__, page, denali->page);
+ BUG();
+ }
+
+ setup_ecc_for_xfer(denali, false, true);
+ denali_enable_dma(denali, true);
+
+ dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE);
+
+ clear_interrupts(denali);
+ denali_setup_dma(denali, DENALI_READ);
+
+ /* wait for operation to complete */
+ wait_for_irq(denali, irq_mask);
+
+ dma_sync_single_for_cpu(denali->dev, addr, size, DMA_FROM_DEVICE);
+
+ denali_enable_dma(denali, false);
+
+ memcpy(buf, denali->buf.buf, mtd->writesize);
+ memcpy(chip->oob_poi, denali->buf.buf + mtd->writesize, mtd->oobsize);
+
+ return 0;
+}
+
+static uint8_t denali_read_byte(struct mtd_info *mtd)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint8_t result = 0xff;
+
+ if (denali->buf.head < denali->buf.tail)
+ result = denali->buf.buf[denali->buf.head++];
+
+ return result;
+}
+
+static void denali_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+
+ spin_lock_irq(&denali->irq_lock);
+ denali->flash_bank = chip;
+ spin_unlock_irq(&denali->irq_lock);
+}
+
+static int denali_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ int status = denali->status;
+
+ denali->status = 0;
+
+ return status;
+}
+
+static int denali_erase(struct mtd_info *mtd, int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+
+ uint32_t cmd, irq_status;
+
+ clear_interrupts(denali);
+
+ /* setup page read request for access type */
+ cmd = MODE_10 | BANK(denali->flash_bank) | page;
+ index_addr(denali, cmd, 0x1);
+
+ /* wait for erase to complete or failure to occur */
+ irq_status = wait_for_irq(denali, INTR_STATUS__ERASE_COMP |
+ INTR_STATUS__ERASE_FAIL);
+
+ return irq_status & INTR_STATUS__ERASE_FAIL ? NAND_STATUS_FAIL : PASS;
+}
+
+static void denali_cmdfunc(struct mtd_info *mtd, unsigned int cmd, int col,
+ int page)
+{
+ struct denali_nand_info *denali = mtd_to_denali(mtd);
+ uint32_t addr, id;
+ int i;
+
+ switch (cmd) {
+ case NAND_CMD_PAGEPROG:
+ break;
+ case NAND_CMD_STATUS:
+ read_status(denali);
+ break;
+ case NAND_CMD_READID:
+ case NAND_CMD_PARAM:
+ reset_buf(denali);
+ /*
+ * sometimes ManufactureId read from register is not right
+ * e.g. some of Micron MT29F32G08QAA MLC NAND chips
+ * So here we send READID cmd to NAND insteand
+ */
+ addr = MODE_11 | BANK(denali->flash_bank);
+ index_addr(denali, addr | 0, 0x90);
+ index_addr(denali, addr | 1, col);
+ for (i = 0; i < 8; i++) {
+ index_addr_read_data(denali, addr | 2, &id);
+ write_byte_to_buf(denali, id);
+ }
+ break;
+ case NAND_CMD_READ0:
+ case NAND_CMD_SEQIN:
+ denali->page = page;
+ break;
+ case NAND_CMD_RESET:
+ reset_bank(denali);
+ break;
+ case NAND_CMD_READOOB:
+ /* TODO: Read OOB data */
+ break;
+ default:
+ pr_err(": unsupported command received 0x%x\n", cmd);
+ break;
+ }
+}
+/* end NAND core entry points */
+
+/* Initialization code to bring the device up to a known good state */
+static void denali_hw_init(struct denali_nand_info *denali)
+{
+ /*
+ * tell driver how many bit controller will skip before
+ * writing ECC code in OOB, this register may be already
+ * set by firmware. So we read this value out.
+ * if this value is 0, just let it be.
+ */
+ denali->bbtskipbytes = ioread32(denali->flash_reg +
+ SPARE_AREA_SKIP_BYTES);
+ detect_max_banks(denali);
+ denali_nand_reset(denali);
+ iowrite32(0x0F, denali->flash_reg + RB_PIN_ENABLED);
+ iowrite32(CHIP_EN_DONT_CARE__FLAG,
+ denali->flash_reg + CHIP_ENABLE_DONT_CARE);
+
+ iowrite32(0xffff, denali->flash_reg + SPARE_AREA_MARKER);
+
+ /* Should set value for these registers when init */
+ iowrite32(0, denali->flash_reg + TWO_ROW_ADDR_CYCLES);
+ iowrite32(1, denali->flash_reg + ECC_ENABLE);
+ denali_nand_timing_set(denali);
+ denali_irq_init(denali);
+}
+
+/*
+ * Althogh controller spec said SLC ECC is forceb to be 4bit,
+ * but denali controller in MRST only support 15bit and 8bit ECC
+ * correction
+ */
+#define ECC_8BITS 14
+static struct nand_ecclayout nand_8bit_oob = {
+ .eccbytes = 14,
+};
+
+#define ECC_15BITS 26
+static struct nand_ecclayout nand_15bit_oob = {
+ .eccbytes = 26,
+};
+
+static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 8,
+ .len = 4,
+ .veroffs = 12,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 8,
+ .len = 4,
+ .veroffs = 12,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
+};
+
+/* initialize driver data structures */
+static void denali_drv_init(struct denali_nand_info *denali)
+{
+ denali->idx = 0;
+
+ /* setup interrupt handler */
+ /*
+ * the completion object will be used to notify
+ * the callee that the interrupt is done
+ */
+ init_completion(&denali->complete);
+
+ /*
+ * the spinlock will be used to synchronize the ISR with any
+ * element that might be access shared data (interrupt status)
+ */
+ spin_lock_init(&denali->irq_lock);
+
+ /* indicate that MTD has not selected a valid bank yet */
+ denali->flash_bank = CHIP_SELECT_INVALID;
+
+ /* initialize our irq_status variable to indicate no interrupts */
+ denali->irq_status = 0;
+}
+
+int denali_init(struct denali_nand_info *denali)
+{
+ int ret;
+
+ if (denali->platform == INTEL_CE4100) {
+ /*
+ * Due to a silicon limitation, we can only support
+ * ONFI timing mode 1 and below.
+ */
+ if (onfi_timing_mode < -1 || onfi_timing_mode > 1) {
+ pr_err("Intel CE4100 only supports ONFI timing mode 1 or below\n");
+ return -EINVAL;
+ }
+ }
+
+ /* allocate a temporary buffer for nand_scan_ident() */
+ denali->buf.buf = devm_kzalloc(denali->dev, PAGE_SIZE,
+ GFP_DMA | GFP_KERNEL);
+ if (!denali->buf.buf)
+ return -ENOMEM;
+
+ denali->mtd.dev.parent = denali->dev;
+ denali_hw_init(denali);
+ denali_drv_init(denali);
+
+ /*
+ * denali_isr register is done after all the hardware
+ * initilization is finished
+ */
+ if (request_irq(denali->irq, denali_isr, IRQF_SHARED,
+ DENALI_NAND_NAME, denali)) {
+ pr_err("Spectra: Unable to allocate IRQ\n");
+ return -ENODEV;
+ }
+
+ /* now that our ISR is registered, we can enable interrupts */
+ denali_set_intr_modes(denali, true);
+ denali->mtd.name = "denali-nand";
+ denali->mtd.priv = &denali->nand;
+
+ /* register the driver with the NAND core subsystem */
+ denali->nand.select_chip = denali_select_chip;
+ denali->nand.cmdfunc = denali_cmdfunc;
+ denali->nand.read_byte = denali_read_byte;
+ denali->nand.waitfunc = denali_waitfunc;
+
+ /*
+ * scan for NAND devices attached to the controller
+ * this is the first stage in a two step process to register
+ * with the nand subsystem
+ */
+ if (nand_scan_ident(&denali->mtd, denali->max_banks, NULL)) {
+ ret = -ENXIO;
+ goto failed_req_irq;
+ }
+
+ /* allocate the right size buffer now */
+ devm_kfree(denali->dev, denali->buf.buf);
+ denali->buf.buf = devm_kzalloc(denali->dev,
+ denali->mtd.writesize + denali->mtd.oobsize,
+ GFP_KERNEL);
+ if (!denali->buf.buf) {
+ ret = -ENOMEM;
+ goto failed_req_irq;
+ }
+
+ /* Is 32-bit DMA supported? */
+ ret = dma_set_mask(denali->dev, DMA_BIT_MASK(32));
+ if (ret) {
+ pr_err("Spectra: no usable DMA configuration\n");
+ goto failed_req_irq;
+ }
+
+ denali->buf.dma_buf = dma_map_single(denali->dev, denali->buf.buf,
+ denali->mtd.writesize + denali->mtd.oobsize,
+ DMA_BIDIRECTIONAL);
+ if (dma_mapping_error(denali->dev, denali->buf.dma_buf)) {
+ dev_err(denali->dev, "Spectra: failed to map DMA buffer\n");
+ ret = -EIO;
+ goto failed_req_irq;
+ }
+
+ /*
+ * support for multi nand
+ * MTD known nothing about multi nand, so we should tell it
+ * the real pagesize and anything necessery
+ */
+ denali->devnum = ioread32(denali->flash_reg + DEVICES_CONNECTED);
+ denali->nand.chipsize <<= (denali->devnum - 1);
+ denali->nand.page_shift += (denali->devnum - 1);
+ denali->nand.pagemask = (denali->nand.chipsize >>
+ denali->nand.page_shift) - 1;
+ denali->nand.bbt_erase_shift += (denali->devnum - 1);
+ denali->nand.phys_erase_shift = denali->nand.bbt_erase_shift;
+ denali->nand.chip_shift += (denali->devnum - 1);
+ denali->mtd.writesize <<= (denali->devnum - 1);
+ denali->mtd.oobsize <<= (denali->devnum - 1);
+ denali->mtd.erasesize <<= (denali->devnum - 1);
+ denali->mtd.size = denali->nand.numchips * denali->nand.chipsize;
+ denali->bbtskipbytes *= denali->devnum;
+
+ /*
+ * second stage of the NAND scan
+ * this stage requires information regarding ECC and
+ * bad block management.
+ */
+
+ /* Bad block management */
+ denali->nand.bbt_td = &bbt_main_descr;
+ denali->nand.bbt_md = &bbt_mirror_descr;
+
+ /* skip the scan for now until we have OOB read and write support */
+ denali->nand.bbt_options |= NAND_BBT_USE_FLASH;
+ denali->nand.options |= NAND_SKIP_BBTSCAN;
+ denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+
+ /* no subpage writes on denali */
+ denali->nand.options |= NAND_NO_SUBPAGE_WRITE;
+
+ /*
+ * Denali Controller only support 15bit and 8bit ECC in MRST,
+ * so just let controller do 15bit ECC for MLC and 8bit ECC for
+ * SLC if possible.
+ * */
+ if (!nand_is_slc(&denali->nand) &&
+ (denali->mtd.oobsize > (denali->bbtskipbytes +
+ ECC_15BITS * (denali->mtd.writesize /
+ ECC_SECTOR_SIZE)))) {
+ /* if MLC OOB size is large enough, use 15bit ECC*/
+ denali->nand.ecc.strength = 15;
+ denali->nand.ecc.layout = &nand_15bit_oob;
+ denali->nand.ecc.bytes = ECC_15BITS;
+ iowrite32(15, denali->flash_reg + ECC_CORRECTION);
+ } else if (denali->mtd.oobsize < (denali->bbtskipbytes +
+ ECC_8BITS * (denali->mtd.writesize /
+ ECC_SECTOR_SIZE))) {
+ pr_err("Your NAND chip OOB is not large enough to contain 8bit ECC correction codes");
+ goto failed_req_irq;
+ } else {
+ denali->nand.ecc.strength = 8;
+ denali->nand.ecc.layout = &nand_8bit_oob;
+ denali->nand.ecc.bytes = ECC_8BITS;
+ iowrite32(8, denali->flash_reg + ECC_CORRECTION);
+ }
+
+ denali->nand.ecc.bytes *= denali->devnum;
+ denali->nand.ecc.strength *= denali->devnum;
+ denali->nand.ecc.layout->eccbytes *=
+ denali->mtd.writesize / ECC_SECTOR_SIZE;
+ denali->nand.ecc.layout->oobfree[0].offset =
+ denali->bbtskipbytes + denali->nand.ecc.layout->eccbytes;
+ denali->nand.ecc.layout->oobfree[0].length =
+ denali->mtd.oobsize - denali->nand.ecc.layout->eccbytes -
+ denali->bbtskipbytes;
+
+ /*
+ * Let driver know the total blocks number and how many blocks
+ * contained by each nand chip. blksperchip will help driver to
+ * know how many blocks is taken by FW.
+ */
+ denali->totalblks = denali->mtd.size >> denali->nand.phys_erase_shift;
+ denali->blksperchip = denali->totalblks / denali->nand.numchips;
+
+ /* override the default read operations */
+ denali->nand.ecc.size = ECC_SECTOR_SIZE * denali->devnum;
+ denali->nand.ecc.read_page = denali_read_page;
+ denali->nand.ecc.read_page_raw = denali_read_page_raw;
+ denali->nand.ecc.write_page = denali_write_page;
+ denali->nand.ecc.write_page_raw = denali_write_page_raw;
+ denali->nand.ecc.read_oob = denali_read_oob;
+ denali->nand.ecc.write_oob = denali_write_oob;
+ denali->nand.erase = denali_erase;
+
+ if (nand_scan_tail(&denali->mtd)) {
+ ret = -ENXIO;
+ goto failed_req_irq;
+ }
+
+ ret = mtd_device_register(&denali->mtd, NULL, 0);
+ if (ret) {
+ dev_err(denali->dev, "Spectra: Failed to register MTD: %d\n",
+ ret);
+ goto failed_req_irq;
+ }
+ return 0;
+
+failed_req_irq:
+ denali_irq_cleanup(denali->irq, denali);
+
+ return ret;
+}
+EXPORT_SYMBOL(denali_init);
+
+/* driver exit point */
+void denali_remove(struct denali_nand_info *denali)
+{
+ denali_irq_cleanup(denali->irq, denali);
+ dma_unmap_single(denali->dev, denali->buf.dma_buf,
+ denali->mtd.writesize + denali->mtd.oobsize,
+ DMA_BIDIRECTIONAL);
+}
+EXPORT_SYMBOL(denali_remove);
diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h
new file mode 100644
index 0000000..4b12cd3
--- /dev/null
+++ b/drivers/mtd/nand/denali.h
@@ -0,0 +1,485 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright (c) 2009 - 2010, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __DENALI_H__
+#define __DENALI_H__
+
+#include <linux/mtd/nand.h>
+
+#define DEVICE_RESET 0x0
+#define DEVICE_RESET__BANK0 0x0001
+#define DEVICE_RESET__BANK1 0x0002
+#define DEVICE_RESET__BANK2 0x0004
+#define DEVICE_RESET__BANK3 0x0008
+
+#define TRANSFER_SPARE_REG 0x10
+#define TRANSFER_SPARE_REG__FLAG 0x0001
+
+#define LOAD_WAIT_CNT 0x20
+#define LOAD_WAIT_CNT__VALUE 0xffff
+
+#define PROGRAM_WAIT_CNT 0x30
+#define PROGRAM_WAIT_CNT__VALUE 0xffff
+
+#define ERASE_WAIT_CNT 0x40
+#define ERASE_WAIT_CNT__VALUE 0xffff
+
+#define INT_MON_CYCCNT 0x50
+#define INT_MON_CYCCNT__VALUE 0xffff
+
+#define RB_PIN_ENABLED 0x60
+#define RB_PIN_ENABLED__BANK0 0x0001
+#define RB_PIN_ENABLED__BANK1 0x0002
+#define RB_PIN_ENABLED__BANK2 0x0004
+#define RB_PIN_ENABLED__BANK3 0x0008
+
+#define MULTIPLANE_OPERATION 0x70
+#define MULTIPLANE_OPERATION__FLAG 0x0001
+
+#define MULTIPLANE_READ_ENABLE 0x80
+#define MULTIPLANE_READ_ENABLE__FLAG 0x0001
+
+#define COPYBACK_DISABLE 0x90
+#define COPYBACK_DISABLE__FLAG 0x0001
+
+#define CACHE_WRITE_ENABLE 0xa0
+#define CACHE_WRITE_ENABLE__FLAG 0x0001
+
+#define CACHE_READ_ENABLE 0xb0
+#define CACHE_READ_ENABLE__FLAG 0x0001
+
+#define PREFETCH_MODE 0xc0
+#define PREFETCH_MODE__PREFETCH_EN 0x0001
+#define PREFETCH_MODE__PREFETCH_BURST_LENGTH 0xfff0
+
+#define CHIP_ENABLE_DONT_CARE 0xd0
+#define CHIP_EN_DONT_CARE__FLAG 0x01
+
+#define ECC_ENABLE 0xe0
+#define ECC_ENABLE__FLAG 0x0001
+
+#define GLOBAL_INT_ENABLE 0xf0
+#define GLOBAL_INT_EN_FLAG 0x01
+
+#define WE_2_RE 0x100
+#define WE_2_RE__VALUE 0x003f
+
+#define ADDR_2_DATA 0x110
+#define ADDR_2_DATA__VALUE 0x003f
+
+#define RE_2_WE 0x120
+#define RE_2_WE__VALUE 0x003f
+
+#define ACC_CLKS 0x130
+#define ACC_CLKS__VALUE 0x000f
+
+#define NUMBER_OF_PLANES 0x140
+#define NUMBER_OF_PLANES__VALUE 0x0007
+
+#define PAGES_PER_BLOCK 0x150
+#define PAGES_PER_BLOCK__VALUE 0xffff
+
+#define DEVICE_WIDTH 0x160
+#define DEVICE_WIDTH__VALUE 0x0003
+
+#define DEVICE_MAIN_AREA_SIZE 0x170
+#define DEVICE_MAIN_AREA_SIZE__VALUE 0xffff
+
+#define DEVICE_SPARE_AREA_SIZE 0x180
+#define DEVICE_SPARE_AREA_SIZE__VALUE 0xffff
+
+#define TWO_ROW_ADDR_CYCLES 0x190
+#define TWO_ROW_ADDR_CYCLES__FLAG 0x0001
+
+#define MULTIPLANE_ADDR_RESTRICT 0x1a0
+#define MULTIPLANE_ADDR_RESTRICT__FLAG 0x0001
+
+#define ECC_CORRECTION 0x1b0
+#define ECC_CORRECTION__VALUE 0x001f
+
+#define READ_MODE 0x1c0
+#define READ_MODE__VALUE 0x000f
+
+#define WRITE_MODE 0x1d0
+#define WRITE_MODE__VALUE 0x000f
+
+#define COPYBACK_MODE 0x1e0
+#define COPYBACK_MODE__VALUE 0x000f
+
+#define RDWR_EN_LO_CNT 0x1f0
+#define RDWR_EN_LO_CNT__VALUE 0x001f
+
+#define RDWR_EN_HI_CNT 0x200
+#define RDWR_EN_HI_CNT__VALUE 0x001f
+
+#define MAX_RD_DELAY 0x210
+#define MAX_RD_DELAY__VALUE 0x000f
+
+#define CS_SETUP_CNT 0x220
+#define CS_SETUP_CNT__VALUE 0x001f
+
+#define SPARE_AREA_SKIP_BYTES 0x230
+#define SPARE_AREA_SKIP_BYTES__VALUE 0x003f
+
+#define SPARE_AREA_MARKER 0x240
+#define SPARE_AREA_MARKER__VALUE 0xffff
+
+#define DEVICES_CONNECTED 0x250
+#define DEVICES_CONNECTED__VALUE 0x0007
+
+#define DIE_MASK 0x260
+#define DIE_MASK__VALUE 0x00ff
+
+#define FIRST_BLOCK_OF_NEXT_PLANE 0x270
+#define FIRST_BLOCK_OF_NEXT_PLANE__VALUE 0xffff
+
+#define WRITE_PROTECT 0x280
+#define WRITE_PROTECT__FLAG 0x0001
+
+#define RE_2_RE 0x290
+#define RE_2_RE__VALUE 0x003f
+
+#define MANUFACTURER_ID 0x300
+#define MANUFACTURER_ID__VALUE 0x00ff
+
+#define DEVICE_ID 0x310
+#define DEVICE_ID__VALUE 0x00ff
+
+#define DEVICE_PARAM_0 0x320
+#define DEVICE_PARAM_0__VALUE 0x00ff
+
+#define DEVICE_PARAM_1 0x330
+#define DEVICE_PARAM_1__VALUE 0x00ff
+
+#define DEVICE_PARAM_2 0x340
+#define DEVICE_PARAM_2__VALUE 0x00ff
+
+#define LOGICAL_PAGE_DATA_SIZE 0x350
+#define LOGICAL_PAGE_DATA_SIZE__VALUE 0xffff
+
+#define LOGICAL_PAGE_SPARE_SIZE 0x360
+#define LOGICAL_PAGE_SPARE_SIZE__VALUE 0xffff
+
+#define REVISION 0x370
+#define REVISION__VALUE 0xffff
+#define MAKE_COMPARABLE_REVISION(x) swab16((x) & REVISION__VALUE)
+#define REVISION_5_1 0x00000501
+
+#define ONFI_DEVICE_FEATURES 0x380
+#define ONFI_DEVICE_FEATURES__VALUE 0x003f
+
+#define ONFI_OPTIONAL_COMMANDS 0x390
+#define ONFI_OPTIONAL_COMMANDS__VALUE 0x003f
+
+#define ONFI_TIMING_MODE 0x3a0
+#define ONFI_TIMING_MODE__VALUE 0x003f
+
+#define ONFI_PGM_CACHE_TIMING_MODE 0x3b0
+#define ONFI_PGM_CACHE_TIMING_MODE__VALUE 0x003f
+
+#define ONFI_DEVICE_NO_OF_LUNS 0x3c0
+#define ONFI_DEVICE_NO_OF_LUNS__NO_OF_LUNS 0x00ff
+#define ONFI_DEVICE_NO_OF_LUNS__ONFI_DEVICE 0x0100
+
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L 0x3d0
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_L__VALUE 0xffff
+
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U 0x3e0
+#define ONFI_DEVICE_NO_OF_BLOCKS_PER_LUN_U__VALUE 0xffff
+
+#define FEATURES 0x3f0
+#define FEATURES__N_BANKS 0x0003
+#define FEATURES__ECC_MAX_ERR 0x003c
+#define FEATURES__DMA 0x0040
+#define FEATURES__CMD_DMA 0x0080
+#define FEATURES__PARTITION 0x0100
+#define FEATURES__XDMA_SIDEBAND 0x0200
+#define FEATURES__GPREG 0x0400
+#define FEATURES__INDEX_ADDR 0x0800
+
+#define TRANSFER_MODE 0x400
+#define TRANSFER_MODE__VALUE 0x0003
+
+#define INTR_STATUS(__bank) (0x410 + ((__bank) * 0x50))
+#define INTR_EN(__bank) (0x420 + ((__bank) * 0x50))
+
+#define INTR_STATUS__ECC_TRANSACTION_DONE 0x0001
+#define INTR_STATUS__ECC_ERR 0x0002
+#define INTR_STATUS__DMA_CMD_COMP 0x0004
+#define INTR_STATUS__TIME_OUT 0x0008
+#define INTR_STATUS__PROGRAM_FAIL 0x0010
+#define INTR_STATUS__ERASE_FAIL 0x0020
+#define INTR_STATUS__LOAD_COMP 0x0040
+#define INTR_STATUS__PROGRAM_COMP 0x0080
+#define INTR_STATUS__ERASE_COMP 0x0100
+#define INTR_STATUS__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR_STATUS__LOCKED_BLK 0x0400
+#define INTR_STATUS__UNSUP_CMD 0x0800
+#define INTR_STATUS__INT_ACT 0x1000
+#define INTR_STATUS__RST_COMP 0x2000
+#define INTR_STATUS__PIPE_CMD_ERR 0x4000
+#define INTR_STATUS__PAGE_XFER_INC 0x8000
+
+#define INTR_EN__ECC_TRANSACTION_DONE 0x0001
+#define INTR_EN__ECC_ERR 0x0002
+#define INTR_EN__DMA_CMD_COMP 0x0004
+#define INTR_EN__TIME_OUT 0x0008
+#define INTR_EN__PROGRAM_FAIL 0x0010
+#define INTR_EN__ERASE_FAIL 0x0020
+#define INTR_EN__LOAD_COMP 0x0040
+#define INTR_EN__PROGRAM_COMP 0x0080
+#define INTR_EN__ERASE_COMP 0x0100
+#define INTR_EN__PIPE_CPYBCK_CMD_COMP 0x0200
+#define INTR_EN__LOCKED_BLK 0x0400
+#define INTR_EN__UNSUP_CMD 0x0800
+#define INTR_EN__INT_ACT 0x1000
+#define INTR_EN__RST_COMP 0x2000
+#define INTR_EN__PIPE_CMD_ERR 0x4000
+#define INTR_EN__PAGE_XFER_INC 0x8000
+
+#define PAGE_CNT(__bank) (0x430 + ((__bank) * 0x50))
+#define ERR_PAGE_ADDR(__bank) (0x440 + ((__bank) * 0x50))
+#define ERR_BLOCK_ADDR(__bank) (0x450 + ((__bank) * 0x50))
+
+#define DATA_INTR 0x550
+#define DATA_INTR__WRITE_SPACE_AV 0x0001
+#define DATA_INTR__READ_DATA_AV 0x0002
+
+#define DATA_INTR_EN 0x560
+#define DATA_INTR_EN__WRITE_SPACE_AV 0x0001
+#define DATA_INTR_EN__READ_DATA_AV 0x0002
+
+#define GPREG_0 0x570
+#define GPREG_0__VALUE 0xffff
+
+#define GPREG_1 0x580
+#define GPREG_1__VALUE 0xffff
+
+#define GPREG_2 0x590
+#define GPREG_2__VALUE 0xffff
+
+#define GPREG_3 0x5a0
+#define GPREG_3__VALUE 0xffff
+
+#define ECC_THRESHOLD 0x600
+#define ECC_THRESHOLD__VALUE 0x03ff
+
+#define ECC_ERROR_BLOCK_ADDRESS 0x610
+#define ECC_ERROR_BLOCK_ADDRESS__VALUE 0xffff
+
+#define ECC_ERROR_PAGE_ADDRESS 0x620
+#define ECC_ERROR_PAGE_ADDRESS__VALUE 0x0fff
+#define ECC_ERROR_PAGE_ADDRESS__BANK 0xf000
+
+#define ECC_ERROR_ADDRESS 0x630
+#define ECC_ERROR_ADDRESS__OFFSET 0x0fff
+#define ECC_ERROR_ADDRESS__SECTOR_NR 0xf000
+
+#define ERR_CORRECTION_INFO 0x640
+#define ERR_CORRECTION_INFO__BYTEMASK 0x00ff
+#define ERR_CORRECTION_INFO__DEVICE_NR 0x0f00
+#define ERR_CORRECTION_INFO__ERROR_TYPE 0x4000
+#define ERR_CORRECTION_INFO__LAST_ERR_INFO 0x8000
+
+#define DMA_ENABLE 0x700
+#define DMA_ENABLE__FLAG 0x0001
+
+#define IGNORE_ECC_DONE 0x710
+#define IGNORE_ECC_DONE__FLAG 0x0001
+
+#define DMA_INTR 0x720
+#define DMA_INTR__TARGET_ERROR 0x0001
+#define DMA_INTR__DESC_COMP_CHANNEL0 0x0002
+#define DMA_INTR__DESC_COMP_CHANNEL1 0x0004
+#define DMA_INTR__DESC_COMP_CHANNEL2 0x0008
+#define DMA_INTR__DESC_COMP_CHANNEL3 0x0010
+#define DMA_INTR__MEMCOPY_DESC_COMP 0x0020
+
+#define DMA_INTR_EN 0x730
+#define DMA_INTR_EN__TARGET_ERROR 0x0001
+#define DMA_INTR_EN__DESC_COMP_CHANNEL0 0x0002
+#define DMA_INTR_EN__DESC_COMP_CHANNEL1 0x0004
+#define DMA_INTR_EN__DESC_COMP_CHANNEL2 0x0008
+#define DMA_INTR_EN__DESC_COMP_CHANNEL3 0x0010
+#define DMA_INTR_EN__MEMCOPY_DESC_COMP 0x0020
+
+#define TARGET_ERR_ADDR_LO 0x740
+#define TARGET_ERR_ADDR_LO__VALUE 0xffff
+
+#define TARGET_ERR_ADDR_HI 0x750
+#define TARGET_ERR_ADDR_HI__VALUE 0xffff
+
+#define CHNL_ACTIVE 0x760
+#define CHNL_ACTIVE__CHANNEL0 0x0001
+#define CHNL_ACTIVE__CHANNEL1 0x0002
+#define CHNL_ACTIVE__CHANNEL2 0x0004
+#define CHNL_ACTIVE__CHANNEL3 0x0008
+
+#define ACTIVE_SRC_ID 0x800
+#define ACTIVE_SRC_ID__VALUE 0x00ff
+
+#define PTN_INTR 0x810
+#define PTN_INTR__CONFIG_ERROR 0x0001
+#define PTN_INTR__ACCESS_ERROR_BANK0 0x0002
+#define PTN_INTR__ACCESS_ERROR_BANK1 0x0004
+#define PTN_INTR__ACCESS_ERROR_BANK2 0x0008
+#define PTN_INTR__ACCESS_ERROR_BANK3 0x0010
+#define PTN_INTR__REG_ACCESS_ERROR 0x0020
+
+#define PTN_INTR_EN 0x820
+#define PTN_INTR_EN__CONFIG_ERROR 0x0001
+#define PTN_INTR_EN__ACCESS_ERROR_BANK0 0x0002
+#define PTN_INTR_EN__ACCESS_ERROR_BANK1 0x0004
+#define PTN_INTR_EN__ACCESS_ERROR_BANK2 0x0008
+#define PTN_INTR_EN__ACCESS_ERROR_BANK3 0x0010
+#define PTN_INTR_EN__REG_ACCESS_ERROR 0x0020
+
+#define PERM_SRC_ID(__bank) (0x830 + ((__bank) * 0x40))
+#define PERM_SRC_ID__SRCID 0x00ff
+#define PERM_SRC_ID__DIRECT_ACCESS_ACTIVE 0x0800
+#define PERM_SRC_ID__WRITE_ACTIVE 0x2000
+#define PERM_SRC_ID__READ_ACTIVE 0x4000
+#define PERM_SRC_ID__PARTITION_VALID 0x8000
+
+#define MIN_BLK_ADDR(__bank) (0x840 + ((__bank) * 0x40))
+#define MIN_BLK_ADDR__VALUE 0xffff
+
+#define MAX_BLK_ADDR(__bank) (0x850 + ((__bank) * 0x40))
+#define MAX_BLK_ADDR__VALUE 0xffff
+
+#define MIN_MAX_BANK(__bank) (0x860 + ((__bank) * 0x40))
+#define MIN_MAX_BANK__MIN_VALUE 0x0003
+#define MIN_MAX_BANK__MAX_VALUE 0x000c
+
+
+/* ffsdefs.h */
+#define CLEAR 0 /*use this to clear a field instead of "fail"*/
+#define SET 1 /*use this to set a field instead of "pass"*/
+#define FAIL 1 /*failed flag*/
+#define PASS 0 /*success flag*/
+#define ERR -1 /*error flag*/
+
+/* lld.h */
+#define GOOD_BLOCK 0
+#define DEFECTIVE_BLOCK 1
+#define READ_ERROR 2
+
+#define CLK_X 5
+#define CLK_MULTI 4
+
+/* spectraswconfig.h */
+#define CMD_DMA 0
+
+#define SPECTRA_PARTITION_ID 0
+/**** Block Table and Reserved Block Parameters *****/
+#define SPECTRA_START_BLOCK 3
+#define NUM_FREE_BLOCKS_GATE 30
+
+/* KBV - Updated to LNW scratch register address */
+#define SCRATCH_REG_ADDR CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR
+#define SCRATCH_REG_SIZE 64
+
+#define GLOB_HWCTL_DEFAULT_BLKS 2048
+
+#define SUPPORT_15BITECC 1
+#define SUPPORT_8BITECC 1
+
+#define CUSTOM_CONF_PARAMS 0
+
+#define ONFI_BLOOM_TIME 1
+#define MODE5_WORKAROUND 0
+
+
+#define MODE_00 0x00000000
+#define MODE_01 0x04000000
+#define MODE_10 0x08000000
+#define MODE_11 0x0C000000
+
+
+#define DATA_TRANSFER_MODE 0
+#define PROTECTION_PER_BLOCK 1
+#define LOAD_WAIT_COUNT 2
+#define PROGRAM_WAIT_COUNT 3
+#define ERASE_WAIT_COUNT 4
+#define INT_MONITOR_CYCLE_COUNT 5
+#define READ_BUSY_PIN_ENABLED 6
+#define MULTIPLANE_OPERATION_SUPPORT 7
+#define PRE_FETCH_MODE 8
+#define CE_DONT_CARE_SUPPORT 9
+#define COPYBACK_SUPPORT 10
+#define CACHE_WRITE_SUPPORT 11
+#define CACHE_READ_SUPPORT 12
+#define NUM_PAGES_IN_BLOCK 13
+#define ECC_ENABLE_SELECT 14
+#define WRITE_ENABLE_2_READ_ENABLE 15
+#define ADDRESS_2_DATA 16
+#define READ_ENABLE_2_WRITE_ENABLE 17
+#define TWO_ROW_ADDRESS_CYCLES 18
+#define MULTIPLANE_ADDRESS_RESTRICT 19
+#define ACC_CLOCKS 20
+#define READ_WRITE_ENABLE_LOW_COUNT 21
+#define READ_WRITE_ENABLE_HIGH_COUNT 22
+
+#define ECC_SECTOR_SIZE 512
+
+struct nand_buf {
+ int head;
+ int tail;
+ uint8_t *buf;
+ dma_addr_t dma_buf;
+};
+
+#define INTEL_CE4100 1
+#define INTEL_MRST 2
+#define DT 3
+
+struct denali_nand_info {
+ struct mtd_info mtd;
+ struct nand_chip nand;
+ int flash_bank; /* currently selected chip */
+ int status;
+ int platform;
+ struct nand_buf buf;
+ struct device *dev;
+ int total_used_banks;
+ uint32_t block; /* stored for future use */
+ uint16_t page;
+ void __iomem *flash_reg; /* Mapped io reg base address */
+ void __iomem *flash_mem; /* Mapped io reg base address */
+
+ /* elements used by ISR */
+ struct completion complete;
+ spinlock_t irq_lock;
+ uint32_t irq_status;
+ int irq_debug_array[32];
+ int idx;
+ int irq;
+
+ uint32_t devnum; /* represent how many nands connected */
+ uint32_t fwblks; /* represent how many blocks FW used */
+ uint32_t totalblks;
+ uint32_t blksperchip;
+ uint32_t bbtskipbytes;
+ uint32_t max_banks;
+};
+
+extern int denali_init(struct denali_nand_info *denali);
+extern void denali_remove(struct denali_nand_info *denali);
+
+#endif /* __DENALI_H__ */
diff --git a/drivers/mtd/nand/denali_dt.c b/drivers/mtd/nand/denali_dt.c
new file mode 100644
index 0000000..0cb1e8d
--- /dev/null
+++ b/drivers/mtd/nand/denali_dt.c
@@ -0,0 +1,131 @@
+/*
+ * NAND Flash Controller Device Driver for DT
+ *
+ * Copyright © 2011, Picochip.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+
+#include "denali.h"
+
+struct denali_dt {
+ struct denali_nand_info denali;
+ struct clk *clk;
+};
+
+static const struct of_device_id denali_nand_dt_ids[] = {
+ { .compatible = "denali,denali-nand-dt" },
+ { /* sentinel */ }
+ };
+
+MODULE_DEVICE_TABLE(of, denali_nand_dt_ids);
+
+static u64 denali_dma_mask;
+
+static int denali_dt_probe(struct platform_device *ofdev)
+{
+ struct resource *denali_reg, *nand_data;
+ struct denali_dt *dt;
+ struct denali_nand_info *denali;
+ int ret;
+ const struct of_device_id *of_id;
+
+ of_id = of_match_device(denali_nand_dt_ids, &ofdev->dev);
+ if (of_id) {
+ ofdev->id_entry = of_id->data;
+ } else {
+ pr_err("Failed to find the right device id.\n");
+ return -ENOMEM;
+ }
+
+ dt = devm_kzalloc(&ofdev->dev, sizeof(*dt), GFP_KERNEL);
+ if (!dt)
+ return -ENOMEM;
+ denali = &dt->denali;
+
+ denali->platform = DT;
+ denali->dev = &ofdev->dev;
+ denali->irq = platform_get_irq(ofdev, 0);
+ if (denali->irq < 0) {
+ dev_err(&ofdev->dev, "no irq defined\n");
+ return denali->irq;
+ }
+
+ denali_reg = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "denali_reg");
+ denali->flash_reg = devm_ioremap_resource(&ofdev->dev, denali_reg);
+ if (IS_ERR(denali->flash_reg))
+ return PTR_ERR(denali->flash_reg);
+
+ nand_data = platform_get_resource_byname(ofdev, IORESOURCE_MEM, "nand_data");
+ denali->flash_mem = devm_ioremap_resource(&ofdev->dev, nand_data);
+ if (IS_ERR(denali->flash_mem))
+ return PTR_ERR(denali->flash_mem);
+
+ if (!of_property_read_u32(ofdev->dev.of_node,
+ "dma-mask", (u32 *)&denali_dma_mask)) {
+ denali->dev->dma_mask = &denali_dma_mask;
+ } else {
+ denali->dev->dma_mask = NULL;
+ }
+
+ dt->clk = devm_clk_get(&ofdev->dev, NULL);
+ if (IS_ERR(dt->clk)) {
+ dev_err(&ofdev->dev, "no clk available\n");
+ return PTR_ERR(dt->clk);
+ }
+ clk_prepare_enable(dt->clk);
+
+ ret = denali_init(denali);
+ if (ret)
+ goto out_disable_clk;
+
+ platform_set_drvdata(ofdev, dt);
+ return 0;
+
+out_disable_clk:
+ clk_disable_unprepare(dt->clk);
+
+ return ret;
+}
+
+static int denali_dt_remove(struct platform_device *ofdev)
+{
+ struct denali_dt *dt = platform_get_drvdata(ofdev);
+
+ denali_remove(&dt->denali);
+ clk_disable(dt->clk);
+
+ return 0;
+}
+
+static struct platform_driver denali_dt_driver = {
+ .probe = denali_dt_probe,
+ .remove = denali_dt_remove,
+ .driver = {
+ .name = "denali-nand-dt",
+ .of_match_table = denali_nand_dt_ids,
+ },
+};
+
+module_platform_driver(denali_dt_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jamie Iles");
+MODULE_DESCRIPTION("DT driver for Denali NAND controller");
diff --git a/drivers/mtd/nand/denali_pci.c b/drivers/mtd/nand/denali_pci.c
new file mode 100644
index 0000000..de31514
--- /dev/null
+++ b/drivers/mtd/nand/denali_pci.c
@@ -0,0 +1,121 @@
+/*
+ * NAND Flash Controller Device Driver
+ * Copyright © 2009-2010, Intel Corporation and its suppliers.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+
+#include "denali.h"
+
+#define DENALI_NAND_NAME "denali-nand-pci"
+
+/* List of platforms this NAND controller has be integrated into */
+static const struct pci_device_id denali_pci_ids[] = {
+ { PCI_VDEVICE(INTEL, 0x0701), INTEL_CE4100 },
+ { PCI_VDEVICE(INTEL, 0x0809), INTEL_MRST },
+ { /* end: all zeroes */ }
+};
+MODULE_DEVICE_TABLE(pci, denali_pci_ids);
+
+static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ int ret;
+ resource_size_t csr_base, mem_base;
+ unsigned long csr_len, mem_len;
+ struct denali_nand_info *denali;
+
+ denali = devm_kzalloc(&dev->dev, sizeof(*denali), GFP_KERNEL);
+ if (!denali)
+ return -ENOMEM;
+
+ ret = pcim_enable_device(dev);
+ if (ret) {
+ dev_err(&dev->dev, "Spectra: pci_enable_device failed.\n");
+ return ret;
+ }
+
+ if (id->driver_data == INTEL_CE4100) {
+ denali->platform = INTEL_CE4100;
+ mem_base = pci_resource_start(dev, 0);
+ mem_len = pci_resource_len(dev, 1);
+ csr_base = pci_resource_start(dev, 1);
+ csr_len = pci_resource_len(dev, 1);
+ } else {
+ denali->platform = INTEL_MRST;
+ csr_base = pci_resource_start(dev, 0);
+ csr_len = pci_resource_len(dev, 0);
+ mem_base = pci_resource_start(dev, 1);
+ mem_len = pci_resource_len(dev, 1);
+ if (!mem_len) {
+ mem_base = csr_base + csr_len;
+ mem_len = csr_len;
+ }
+ }
+
+ pci_set_master(dev);
+ denali->dev = &dev->dev;
+ denali->irq = dev->irq;
+
+ ret = pci_request_regions(dev, DENALI_NAND_NAME);
+ if (ret) {
+ dev_err(&dev->dev, "Spectra: Unable to request memory regions\n");
+ return ret;
+ }
+
+ denali->flash_reg = ioremap_nocache(csr_base, csr_len);
+ if (!denali->flash_reg) {
+ dev_err(&dev->dev, "Spectra: Unable to remap memory region\n");
+ return -ENOMEM;
+ }
+
+ denali->flash_mem = ioremap_nocache(mem_base, mem_len);
+ if (!denali->flash_mem) {
+ dev_err(&dev->dev, "Spectra: ioremap_nocache failed!");
+ ret = -ENOMEM;
+ goto failed_remap_reg;
+ }
+
+ ret = denali_init(denali);
+ if (ret)
+ goto failed_remap_mem;
+
+ pci_set_drvdata(dev, denali);
+
+ return 0;
+
+failed_remap_mem:
+ iounmap(denali->flash_mem);
+failed_remap_reg:
+ iounmap(denali->flash_reg);
+ return ret;
+}
+
+/* driver exit point */
+static void denali_pci_remove(struct pci_dev *dev)
+{
+ struct denali_nand_info *denali = pci_get_drvdata(dev);
+
+ denali_remove(denali);
+ iounmap(denali->flash_reg);
+ iounmap(denali->flash_mem);
+}
+
+static struct pci_driver denali_pci_driver = {
+ .name = DENALI_NAND_NAME,
+ .id_table = denali_pci_ids,
+ .probe = denali_pci_probe,
+ .remove = denali_pci_remove,
+};
+
+module_pci_driver(denali_pci_driver);
diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c
new file mode 100644
index 0000000..0802158
--- /dev/null
+++ b/drivers/mtd/nand/diskonchip.c
@@ -0,0 +1,1715 @@
+/*
+ * drivers/mtd/nand/diskonchip.c
+ *
+ * (C) 2003 Red Hat, Inc.
+ * (C) 2004 Dan Brown <dan_brown@ieee.org>
+ * (C) 2004 Kalev Lember <kalev@smartlink.ee>
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ * Additional Diskonchip 2000 and Millennium support by Dan Brown <dan_brown@ieee.org>
+ * Diskonchip Millennium Plus support by Kalev Lember <kalev@smartlink.ee>
+ *
+ * Error correction code lifted from the old docecc code
+ * Author: Fabrice Bellard (fabrice.bellard@netgem.com)
+ * Copyright (C) 2000 Netgem S.A.
+ * converted to the generic Reed-Solomon library by Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Interface to generic NAND code for M-Systems DiskOnChip devices
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/rslib.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/doc2000.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/inftl.h>
+#include <linux/module.h>
+
+/* Where to look for the devices? */
+#ifndef CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS
+#define CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS 0
+#endif
+
+static unsigned long doc_locations[] __initdata = {
+#if defined (__alpha__) || defined(__i386__) || defined(__x86_64__)
+#ifdef CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH
+ 0xfffc8000, 0xfffca000, 0xfffcc000, 0xfffce000,
+ 0xfffd0000, 0xfffd2000, 0xfffd4000, 0xfffd6000,
+ 0xfffd8000, 0xfffda000, 0xfffdc000, 0xfffde000,
+ 0xfffe0000, 0xfffe2000, 0xfffe4000, 0xfffe6000,
+ 0xfffe8000, 0xfffea000, 0xfffec000, 0xfffee000,
+#else
+ 0xc8000, 0xca000, 0xcc000, 0xce000,
+ 0xd0000, 0xd2000, 0xd4000, 0xd6000,
+ 0xd8000, 0xda000, 0xdc000, 0xde000,
+ 0xe0000, 0xe2000, 0xe4000, 0xe6000,
+ 0xe8000, 0xea000, 0xec000, 0xee000,
+#endif
+#endif
+ 0xffffffff };
+
+static struct mtd_info *doclist = NULL;
+
+struct doc_priv {
+ void __iomem *virtadr;
+ unsigned long physadr;
+ u_char ChipID;
+ u_char CDSNControl;
+ int chips_per_floor; /* The number of chips detected on each floor */
+ int curfloor;
+ int curchip;
+ int mh0_page;
+ int mh1_page;
+ struct mtd_info *nextdoc;
+
+ /* Handle the last stage of initialization (BBT scan, partitioning) */
+ int (*late_init)(struct mtd_info *mtd);
+};
+
+/* This is the syndrome computed by the HW ecc generator upon reading an empty
+ page, one with all 0xff for data and stored ecc code. */
+static u_char empty_read_syndrome[6] = { 0x26, 0xff, 0x6d, 0x47, 0x73, 0x7a };
+
+/* This is the ecc value computed by the HW ecc generator upon writing an empty
+ page, one with all 0xff for data. */
+static u_char empty_write_ecc[6] = { 0x4b, 0x00, 0xe2, 0x0e, 0x93, 0xf7 };
+
+#define INFTL_BBT_RESERVED_BLOCKS 4
+
+#define DoC_is_MillenniumPlus(doc) ((doc)->ChipID == DOC_ChipID_DocMilPlus16 || (doc)->ChipID == DOC_ChipID_DocMilPlus32)
+#define DoC_is_Millennium(doc) ((doc)->ChipID == DOC_ChipID_DocMil)
+#define DoC_is_2000(doc) ((doc)->ChipID == DOC_ChipID_Doc2k)
+
+static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int bitmask);
+static void doc200x_select_chip(struct mtd_info *mtd, int chip);
+
+static int debug = 0;
+module_param(debug, int, 0);
+
+static int try_dword = 1;
+module_param(try_dword, int, 0);
+
+static int no_ecc_failures = 0;
+module_param(no_ecc_failures, int, 0);
+
+static int no_autopart = 0;
+module_param(no_autopart, int, 0);
+
+static int show_firmware_partition = 0;
+module_param(show_firmware_partition, int, 0);
+
+#ifdef CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE
+static int inftl_bbt_write = 1;
+#else
+static int inftl_bbt_write = 0;
+#endif
+module_param(inftl_bbt_write, int, 0);
+
+static unsigned long doc_config_location = CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS;
+module_param(doc_config_location, ulong, 0);
+MODULE_PARM_DESC(doc_config_location, "Physical memory address at which to probe for DiskOnChip");
+
+/* Sector size for HW ECC */
+#define SECTOR_SIZE 512
+/* The sector bytes are packed into NB_DATA 10 bit words */
+#define NB_DATA (((SECTOR_SIZE + 1) * 8 + 6) / 10)
+/* Number of roots */
+#define NROOTS 4
+/* First consective root */
+#define FCR 510
+/* Number of symbols */
+#define NN 1023
+
+/* the Reed Solomon control structure */
+static struct rs_control *rs_decoder;
+
+/*
+ * The HW decoder in the DoC ASIC's provides us a error syndrome,
+ * which we must convert to a standard syndrome usable by the generic
+ * Reed-Solomon library code.
+ *
+ * Fabrice Bellard figured this out in the old docecc code. I added
+ * some comments, improved a minor bit and converted it to make use
+ * of the generic Reed-Solomon library. tglx
+ */
+static int doc_ecc_decode(struct rs_control *rs, uint8_t *data, uint8_t *ecc)
+{
+ int i, j, nerr, errpos[8];
+ uint8_t parity;
+ uint16_t ds[4], s[5], tmp, errval[8], syn[4];
+
+ memset(syn, 0, sizeof(syn));
+ /* Convert the ecc bytes into words */
+ ds[0] = ((ecc[4] & 0xff) >> 0) | ((ecc[5] & 0x03) << 8);
+ ds[1] = ((ecc[5] & 0xfc) >> 2) | ((ecc[2] & 0x0f) << 6);
+ ds[2] = ((ecc[2] & 0xf0) >> 4) | ((ecc[3] & 0x3f) << 4);
+ ds[3] = ((ecc[3] & 0xc0) >> 6) | ((ecc[0] & 0xff) << 2);
+ parity = ecc[1];
+
+ /* Initialize the syndrome buffer */
+ for (i = 0; i < NROOTS; i++)
+ s[i] = ds[0];
+ /*
+ * Evaluate
+ * s[i] = ds[3]x^3 + ds[2]x^2 + ds[1]x^1 + ds[0]
+ * where x = alpha^(FCR + i)
+ */
+ for (j = 1; j < NROOTS; j++) {
+ if (ds[j] == 0)
+ continue;
+ tmp = rs->index_of[ds[j]];
+ for (i = 0; i < NROOTS; i++)
+ s[i] ^= rs->alpha_to[rs_modnn(rs, tmp + (FCR + i) * j)];
+ }
+
+ /* Calc syn[i] = s[i] / alpha^(v + i) */
+ for (i = 0; i < NROOTS; i++) {
+ if (s[i])
+ syn[i] = rs_modnn(rs, rs->index_of[s[i]] + (NN - FCR - i));
+ }
+ /* Call the decoder library */
+ nerr = decode_rs16(rs, NULL, NULL, 1019, syn, 0, errpos, 0, errval);
+
+ /* Incorrectable errors ? */
+ if (nerr < 0)
+ return nerr;
+
+ /*
+ * Correct the errors. The bitpositions are a bit of magic,
+ * but they are given by the design of the de/encoder circuit
+ * in the DoC ASIC's.
+ */
+ for (i = 0; i < nerr; i++) {
+ int index, bitpos, pos = 1015 - errpos[i];
+ uint8_t val;
+ if (pos >= NB_DATA && pos < 1019)
+ continue;
+ if (pos < NB_DATA) {
+ /* extract bit position (MSB first) */
+ pos = 10 * (NB_DATA - 1 - pos) - 6;
+ /* now correct the following 10 bits. At most two bytes
+ can be modified since pos is even */
+ index = (pos >> 3) ^ 1;
+ bitpos = pos & 7;
+ if ((index >= 0 && index < SECTOR_SIZE) || index == (SECTOR_SIZE + 1)) {
+ val = (uint8_t) (errval[i] >> (2 + bitpos));
+ parity ^= val;
+ if (index < SECTOR_SIZE)
+ data[index] ^= val;
+ }
+ index = ((pos >> 3) + 1) ^ 1;
+ bitpos = (bitpos + 10) & 7;
+ if (bitpos == 0)
+ bitpos = 8;
+ if ((index >= 0 && index < SECTOR_SIZE) || index == (SECTOR_SIZE + 1)) {
+ val = (uint8_t) (errval[i] << (8 - bitpos));
+ parity ^= val;
+ if (index < SECTOR_SIZE)
+ data[index] ^= val;
+ }
+ }
+ }
+ /* If the parity is wrong, no rescue possible */
+ return parity ? -EBADMSG : nerr;
+}
+
+static void DoC_Delay(struct doc_priv *doc, unsigned short cycles)
+{
+ volatile char dummy;
+ int i;
+
+ for (i = 0; i < cycles; i++) {
+ if (DoC_is_Millennium(doc))
+ dummy = ReadDOC(doc->virtadr, NOP);
+ else if (DoC_is_MillenniumPlus(doc))
+ dummy = ReadDOC(doc->virtadr, Mplus_NOP);
+ else
+ dummy = ReadDOC(doc->virtadr, DOCStatus);
+ }
+
+}
+
+#define CDSN_CTRL_FR_B_MASK (CDSN_CTRL_FR_B0 | CDSN_CTRL_FR_B1)
+
+/* DOC_WaitReady: Wait for RDY line to be asserted by the flash chip */
+static int _DoC_WaitReady(struct doc_priv *doc)
+{
+ void __iomem *docptr = doc->virtadr;
+ unsigned long timeo = jiffies + (HZ * 10);
+
+ if (debug)
+ printk("_DoC_WaitReady...\n");
+ /* Out-of-line routine to wait for chip response */
+ if (DoC_is_MillenniumPlus(doc)) {
+ while ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) {
+ if (time_after(jiffies, timeo)) {
+ printk("_DoC_WaitReady timed out.\n");
+ return -EIO;
+ }
+ udelay(1);
+ cond_resched();
+ }
+ } else {
+ while (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
+ if (time_after(jiffies, timeo)) {
+ printk("_DoC_WaitReady timed out.\n");
+ return -EIO;
+ }
+ udelay(1);
+ cond_resched();
+ }
+ }
+
+ return 0;
+}
+
+static inline int DoC_WaitReady(struct doc_priv *doc)
+{
+ void __iomem *docptr = doc->virtadr;
+ int ret = 0;
+
+ if (DoC_is_MillenniumPlus(doc)) {
+ DoC_Delay(doc, 4);
+
+ if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK)
+ /* Call the out-of-line routine to wait */
+ ret = _DoC_WaitReady(doc);
+ } else {
+ DoC_Delay(doc, 4);
+
+ if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B))
+ /* Call the out-of-line routine to wait */
+ ret = _DoC_WaitReady(doc);
+ DoC_Delay(doc, 2);
+ }
+
+ if (debug)
+ printk("DoC_WaitReady OK\n");
+ return ret;
+}
+
+static void doc2000_write_byte(struct mtd_info *mtd, u_char datum)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ if (debug)
+ printk("write_byte %02x\n", datum);
+ WriteDOC(datum, docptr, CDSNSlowIO);
+ WriteDOC(datum, docptr, 2k_CDSN_IO);
+}
+
+static u_char doc2000_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ u_char ret;
+
+ ReadDOC(docptr, CDSNSlowIO);
+ DoC_Delay(doc, 2);
+ ret = ReadDOC(docptr, 2k_CDSN_IO);
+ if (debug)
+ printk("read_byte returns %02x\n", ret);
+ return ret;
+}
+
+static void doc2000_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ int i;
+ if (debug)
+ printk("writebuf of %d bytes: ", len);
+ for (i = 0; i < len; i++) {
+ WriteDOC_(buf[i], docptr, DoC_2k_CDSN_IO + i);
+ if (debug && i < 16)
+ printk("%02x ", buf[i]);
+ }
+ if (debug)
+ printk("\n");
+}
+
+static void doc2000_readbuf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ int i;
+
+ if (debug)
+ printk("readbuf of %d bytes: ", len);
+
+ for (i = 0; i < len; i++) {
+ buf[i] = ReadDOC(docptr, 2k_CDSN_IO + i);
+ }
+}
+
+static void doc2000_readbuf_dword(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ int i;
+
+ if (debug)
+ printk("readbuf_dword of %d bytes: ", len);
+
+ if (unlikely((((unsigned long)buf) | len) & 3)) {
+ for (i = 0; i < len; i++) {
+ *(uint8_t *) (&buf[i]) = ReadDOC(docptr, 2k_CDSN_IO + i);
+ }
+ } else {
+ for (i = 0; i < len; i += 4) {
+ *(uint32_t *) (&buf[i]) = readl(docptr + DoC_2k_CDSN_IO + i);
+ }
+ }
+}
+
+static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ uint16_t ret;
+
+ doc200x_select_chip(mtd, nr);
+ doc200x_hwcontrol(mtd, NAND_CMD_READID,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ /* We can't use dev_ready here, but at least we wait for the
+ * command to complete
+ */
+ udelay(50);
+
+ ret = this->read_byte(mtd) << 8;
+ ret |= this->read_byte(mtd);
+
+ if (doc->ChipID == DOC_ChipID_Doc2k && try_dword && !nr) {
+ /* First chip probe. See if we get same results by 32-bit access */
+ union {
+ uint32_t dword;
+ uint8_t byte[4];
+ } ident;
+ void __iomem *docptr = doc->virtadr;
+
+ doc200x_hwcontrol(mtd, NAND_CMD_READID,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, 0, NAND_CTRL_ALE | NAND_CTRL_CHANGE);
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+
+ udelay(50);
+
+ ident.dword = readl(docptr + DoC_2k_CDSN_IO);
+ if (((ident.byte[0] << 8) | ident.byte[1]) == ret) {
+ printk(KERN_INFO "DiskOnChip 2000 responds to DWORD access\n");
+ this->read_buf = &doc2000_readbuf_dword;
+ }
+ }
+
+ return ret;
+}
+
+static void __init doc2000_count_chips(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ uint16_t mfrid;
+ int i;
+
+ /* Max 4 chips per floor on DiskOnChip 2000 */
+ doc->chips_per_floor = 4;
+
+ /* Find out what the first chip is */
+ mfrid = doc200x_ident_chip(mtd, 0);
+
+ /* Find how many chips in each floor. */
+ for (i = 1; i < 4; i++) {
+ if (doc200x_ident_chip(mtd, i) != mfrid)
+ break;
+ }
+ doc->chips_per_floor = i;
+ printk(KERN_DEBUG "Detected %d chips per floor.\n", i);
+}
+
+static int doc200x_wait(struct mtd_info *mtd, struct nand_chip *this)
+{
+ struct doc_priv *doc = this->priv;
+
+ int status;
+
+ DoC_WaitReady(doc);
+ this->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ DoC_WaitReady(doc);
+ status = (int)this->read_byte(mtd);
+
+ return status;
+}
+
+static void doc2001_write_byte(struct mtd_info *mtd, u_char datum)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ WriteDOC(datum, docptr, CDSNSlowIO);
+ WriteDOC(datum, docptr, Mil_CDSN_IO);
+ WriteDOC(datum, docptr, WritePipeTerm);
+}
+
+static u_char doc2001_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ //ReadDOC(docptr, CDSNSlowIO);
+ /* 11.4.5 -- delay twice to allow extended length cycle */
+ DoC_Delay(doc, 2);
+ ReadDOC(docptr, ReadPipeInit);
+ //return ReadDOC(docptr, Mil_CDSN_IO);
+ return ReadDOC(docptr, LastDataRead);
+}
+
+static void doc2001_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ int i;
+
+ for (i = 0; i < len; i++)
+ WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i);
+ /* Terminate write pipeline */
+ WriteDOC(0x00, docptr, WritePipeTerm);
+}
+
+static void doc2001_readbuf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ int i;
+
+ /* Start read pipeline */
+ ReadDOC(docptr, ReadPipeInit);
+
+ for (i = 0; i < len - 1; i++)
+ buf[i] = ReadDOC(docptr, Mil_CDSN_IO + (i & 0xff));
+
+ /* Terminate read pipeline */
+ buf[i] = ReadDOC(docptr, LastDataRead);
+}
+
+static u_char doc2001plus_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ u_char ret;
+
+ ReadDOC(docptr, Mplus_ReadPipeInit);
+ ReadDOC(docptr, Mplus_ReadPipeInit);
+ ret = ReadDOC(docptr, Mplus_LastDataRead);
+ if (debug)
+ printk("read_byte returns %02x\n", ret);
+ return ret;
+}
+
+static void doc2001plus_writebuf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ int i;
+
+ if (debug)
+ printk("writebuf of %d bytes: ", len);
+ for (i = 0; i < len; i++) {
+ WriteDOC_(buf[i], docptr, DoC_Mil_CDSN_IO + i);
+ if (debug && i < 16)
+ printk("%02x ", buf[i]);
+ }
+ if (debug)
+ printk("\n");
+}
+
+static void doc2001plus_readbuf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ int i;
+
+ if (debug)
+ printk("readbuf of %d bytes: ", len);
+
+ /* Start read pipeline */
+ ReadDOC(docptr, Mplus_ReadPipeInit);
+ ReadDOC(docptr, Mplus_ReadPipeInit);
+
+ for (i = 0; i < len - 2; i++) {
+ buf[i] = ReadDOC(docptr, Mil_CDSN_IO);
+ if (debug && i < 16)
+ printk("%02x ", buf[i]);
+ }
+
+ /* Terminate read pipeline */
+ buf[len - 2] = ReadDOC(docptr, Mplus_LastDataRead);
+ if (debug && i < 16)
+ printk("%02x ", buf[len - 2]);
+ buf[len - 1] = ReadDOC(docptr, Mplus_LastDataRead);
+ if (debug && i < 16)
+ printk("%02x ", buf[len - 1]);
+ if (debug)
+ printk("\n");
+}
+
+static void doc2001plus_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ int floor = 0;
+
+ if (debug)
+ printk("select chip (%d)\n", chip);
+
+ if (chip == -1) {
+ /* Disable flash internally */
+ WriteDOC(0, docptr, Mplus_FlashSelect);
+ return;
+ }
+
+ floor = chip / doc->chips_per_floor;
+ chip -= (floor * doc->chips_per_floor);
+
+ /* Assert ChipEnable and deassert WriteProtect */
+ WriteDOC((DOC_FLASH_CE), docptr, Mplus_FlashSelect);
+ this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+ doc->curchip = chip;
+ doc->curfloor = floor;
+}
+
+static void doc200x_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ int floor = 0;
+
+ if (debug)
+ printk("select chip (%d)\n", chip);
+
+ if (chip == -1)
+ return;
+
+ floor = chip / doc->chips_per_floor;
+ chip -= (floor * doc->chips_per_floor);
+
+ /* 11.4.4 -- deassert CE before changing chip */
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+
+ WriteDOC(floor, docptr, FloorSelect);
+ WriteDOC(chip, docptr, CDSNDeviceSelect);
+
+ doc200x_hwcontrol(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ doc->curchip = chip;
+ doc->curfloor = floor;
+}
+
+#define CDSN_CTRL_MSK (CDSN_CTRL_CE | CDSN_CTRL_CLE | CDSN_CTRL_ALE)
+
+static void doc200x_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ doc->CDSNControl &= ~CDSN_CTRL_MSK;
+ doc->CDSNControl |= ctrl & CDSN_CTRL_MSK;
+ if (debug)
+ printk("hwcontrol(%d): %02x\n", cmd, doc->CDSNControl);
+ WriteDOC(doc->CDSNControl, docptr, CDSNControl);
+ /* 11.4.3 -- 4 NOPs after CSDNControl write */
+ DoC_Delay(doc, 4);
+ }
+ if (cmd != NAND_CMD_NONE) {
+ if (DoC_is_2000(doc))
+ doc2000_write_byte(mtd, cmd);
+ else
+ doc2001_write_byte(mtd, cmd);
+ }
+}
+
+static void doc2001plus_command(struct mtd_info *mtd, unsigned command, int column, int page_addr)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ /*
+ * Must terminate write pipeline before sending any commands
+ * to the device.
+ */
+ if (command == NAND_CMD_PAGEPROG) {
+ WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+ WriteDOC(0x00, docptr, Mplus_WritePipeTerm);
+ }
+
+ /*
+ * Write out the command to the device.
+ */
+ if (command == NAND_CMD_SEQIN) {
+ int readcmd;
+
+ if (column >= mtd->writesize) {
+ /* OOB area */
+ column -= mtd->writesize;
+ readcmd = NAND_CMD_READOOB;
+ } else if (column < 256) {
+ /* First 256 bytes --> READ0 */
+ readcmd = NAND_CMD_READ0;
+ } else {
+ column -= 256;
+ readcmd = NAND_CMD_READ1;
+ }
+ WriteDOC(readcmd, docptr, Mplus_FlashCmd);
+ }
+ WriteDOC(command, docptr, Mplus_FlashCmd);
+ WriteDOC(0, docptr, Mplus_WritePipeTerm);
+ WriteDOC(0, docptr, Mplus_WritePipeTerm);
+
+ if (column != -1 || page_addr != -1) {
+ /* Serially input address */
+ if (column != -1) {
+ /* Adjust columns for 16 bit buswidth */
+ if (this->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
+ column >>= 1;
+ WriteDOC(column, docptr, Mplus_FlashAddress);
+ }
+ if (page_addr != -1) {
+ WriteDOC((unsigned char)(page_addr & 0xff), docptr, Mplus_FlashAddress);
+ WriteDOC((unsigned char)((page_addr >> 8) & 0xff), docptr, Mplus_FlashAddress);
+ /* One more address cycle for higher density devices */
+ if (this->chipsize & 0x0c000000) {
+ WriteDOC((unsigned char)((page_addr >> 16) & 0x0f), docptr, Mplus_FlashAddress);
+ printk("high density\n");
+ }
+ }
+ WriteDOC(0, docptr, Mplus_WritePipeTerm);
+ WriteDOC(0, docptr, Mplus_WritePipeTerm);
+ /* deassert ALE */
+ if (command == NAND_CMD_READ0 || command == NAND_CMD_READ1 ||
+ command == NAND_CMD_READOOB || command == NAND_CMD_READID)
+ WriteDOC(0, docptr, Mplus_FlashControl);
+ }
+
+ /*
+ * program and erase have their own busy handlers
+ * status and sequential in needs no delay
+ */
+ switch (command) {
+
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_STATUS:
+ return;
+
+ case NAND_CMD_RESET:
+ if (this->dev_ready)
+ break;
+ udelay(this->chip_delay);
+ WriteDOC(NAND_CMD_STATUS, docptr, Mplus_FlashCmd);
+ WriteDOC(0, docptr, Mplus_WritePipeTerm);
+ WriteDOC(0, docptr, Mplus_WritePipeTerm);
+ while (!(this->read_byte(mtd) & 0x40)) ;
+ return;
+
+ /* This applies to read commands */
+ default:
+ /*
+ * If we don't have access to the busy pin, we apply the given
+ * command delay
+ */
+ if (!this->dev_ready) {
+ udelay(this->chip_delay);
+ return;
+ }
+ }
+
+ /* Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine. */
+ ndelay(100);
+ /* wait until command is processed */
+ while (!this->dev_ready(mtd)) ;
+}
+
+static int doc200x_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ if (DoC_is_MillenniumPlus(doc)) {
+ /* 11.4.2 -- must NOP four times before checking FR/B# */
+ DoC_Delay(doc, 4);
+ if ((ReadDOC(docptr, Mplus_FlashControl) & CDSN_CTRL_FR_B_MASK) != CDSN_CTRL_FR_B_MASK) {
+ if (debug)
+ printk("not ready\n");
+ return 0;
+ }
+ if (debug)
+ printk("was ready\n");
+ return 1;
+ } else {
+ /* 11.4.2 -- must NOP four times before checking FR/B# */
+ DoC_Delay(doc, 4);
+ if (!(ReadDOC(docptr, CDSNControl) & CDSN_CTRL_FR_B)) {
+ if (debug)
+ printk("not ready\n");
+ return 0;
+ }
+ /* 11.4.2 -- Must NOP twice if it's ready */
+ DoC_Delay(doc, 2);
+ if (debug)
+ printk("was ready\n");
+ return 1;
+ }
+}
+
+static int doc200x_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ /* This is our last resort if we couldn't find or create a BBT. Just
+ pretend all blocks are good. */
+ return 0;
+}
+
+static void doc200x_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ /* Prime the ECC engine */
+ switch (mode) {
+ case NAND_ECC_READ:
+ WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
+ WriteDOC(DOC_ECC_EN, docptr, ECCConf);
+ break;
+ case NAND_ECC_WRITE:
+ WriteDOC(DOC_ECC_RESET, docptr, ECCConf);
+ WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, ECCConf);
+ break;
+ }
+}
+
+static void doc2001plus_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ /* Prime the ECC engine */
+ switch (mode) {
+ case NAND_ECC_READ:
+ WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+ WriteDOC(DOC_ECC_EN, docptr, Mplus_ECCConf);
+ break;
+ case NAND_ECC_WRITE:
+ WriteDOC(DOC_ECC_RESET, docptr, Mplus_ECCConf);
+ WriteDOC(DOC_ECC_EN | DOC_ECC_RW, docptr, Mplus_ECCConf);
+ break;
+ }
+}
+
+/* This code is only called on write */
+static int doc200x_calculate_ecc(struct mtd_info *mtd, const u_char *dat, unsigned char *ecc_code)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ int i;
+ int emptymatch = 1;
+
+ /* flush the pipeline */
+ if (DoC_is_2000(doc)) {
+ WriteDOC(doc->CDSNControl & ~CDSN_CTRL_FLASH_IO, docptr, CDSNControl);
+ WriteDOC(0, docptr, 2k_CDSN_IO);
+ WriteDOC(0, docptr, 2k_CDSN_IO);
+ WriteDOC(0, docptr, 2k_CDSN_IO);
+ WriteDOC(doc->CDSNControl, docptr, CDSNControl);
+ } else if (DoC_is_MillenniumPlus(doc)) {
+ WriteDOC(0, docptr, Mplus_NOP);
+ WriteDOC(0, docptr, Mplus_NOP);
+ WriteDOC(0, docptr, Mplus_NOP);
+ } else {
+ WriteDOC(0, docptr, NOP);
+ WriteDOC(0, docptr, NOP);
+ WriteDOC(0, docptr, NOP);
+ }
+
+ for (i = 0; i < 6; i++) {
+ if (DoC_is_MillenniumPlus(doc))
+ ecc_code[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i);
+ else
+ ecc_code[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i);
+ if (ecc_code[i] != empty_write_ecc[i])
+ emptymatch = 0;
+ }
+ if (DoC_is_MillenniumPlus(doc))
+ WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
+ else
+ WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
+#if 0
+ /* If emptymatch=1, we might have an all-0xff data buffer. Check. */
+ if (emptymatch) {
+ /* Note: this somewhat expensive test should not be triggered
+ often. It could be optimized away by examining the data in
+ the writebuf routine, and remembering the result. */
+ for (i = 0; i < 512; i++) {
+ if (dat[i] == 0xff)
+ continue;
+ emptymatch = 0;
+ break;
+ }
+ }
+ /* If emptymatch still =1, we do have an all-0xff data buffer.
+ Return all-0xff ecc value instead of the computed one, so
+ it'll look just like a freshly-erased page. */
+ if (emptymatch)
+ memset(ecc_code, 0xff, 6);
+#endif
+ return 0;
+}
+
+static int doc200x_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *isnull)
+{
+ int i, ret = 0;
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint8_t calc_ecc[6];
+ volatile u_char dummy;
+ int emptymatch = 1;
+
+ /* flush the pipeline */
+ if (DoC_is_2000(doc)) {
+ dummy = ReadDOC(docptr, 2k_ECCStatus);
+ dummy = ReadDOC(docptr, 2k_ECCStatus);
+ dummy = ReadDOC(docptr, 2k_ECCStatus);
+ } else if (DoC_is_MillenniumPlus(doc)) {
+ dummy = ReadDOC(docptr, Mplus_ECCConf);
+ dummy = ReadDOC(docptr, Mplus_ECCConf);
+ dummy = ReadDOC(docptr, Mplus_ECCConf);
+ } else {
+ dummy = ReadDOC(docptr, ECCConf);
+ dummy = ReadDOC(docptr, ECCConf);
+ dummy = ReadDOC(docptr, ECCConf);
+ }
+
+ /* Error occurred ? */
+ if (dummy & 0x80) {
+ for (i = 0; i < 6; i++) {
+ if (DoC_is_MillenniumPlus(doc))
+ calc_ecc[i] = ReadDOC_(docptr, DoC_Mplus_ECCSyndrome0 + i);
+ else
+ calc_ecc[i] = ReadDOC_(docptr, DoC_ECCSyndrome0 + i);
+ if (calc_ecc[i] != empty_read_syndrome[i])
+ emptymatch = 0;
+ }
+ /* If emptymatch=1, the read syndrome is consistent with an
+ all-0xff data and stored ecc block. Check the stored ecc. */
+ if (emptymatch) {
+ for (i = 0; i < 6; i++) {
+ if (read_ecc[i] == 0xff)
+ continue;
+ emptymatch = 0;
+ break;
+ }
+ }
+ /* If emptymatch still =1, check the data block. */
+ if (emptymatch) {
+ /* Note: this somewhat expensive test should not be triggered
+ often. It could be optimized away by examining the data in
+ the readbuf routine, and remembering the result. */
+ for (i = 0; i < 512; i++) {
+ if (dat[i] == 0xff)
+ continue;
+ emptymatch = 0;
+ break;
+ }
+ }
+ /* If emptymatch still =1, this is almost certainly a freshly-
+ erased block, in which case the ECC will not come out right.
+ We'll suppress the error and tell the caller everything's
+ OK. Because it is. */
+ if (!emptymatch)
+ ret = doc_ecc_decode(rs_decoder, dat, calc_ecc);
+ if (ret > 0)
+ printk(KERN_ERR "doc200x_correct_data corrected %d errors\n", ret);
+ }
+ if (DoC_is_MillenniumPlus(doc))
+ WriteDOC(DOC_ECC_DIS, docptr, Mplus_ECCConf);
+ else
+ WriteDOC(DOC_ECC_DIS, docptr, ECCConf);
+ if (no_ecc_failures && mtd_is_eccerr(ret)) {
+ printk(KERN_ERR "suppressing ECC failure\n");
+ ret = 0;
+ }
+ return ret;
+}
+
+//u_char mydatabuf[528];
+
+/* The strange out-of-order .oobfree list below is a (possibly unneeded)
+ * attempt to retain compatibility. It used to read:
+ * .oobfree = { {8, 8} }
+ * Since that leaves two bytes unusable, it was changed. But the following
+ * scheme might affect existing jffs2 installs by moving the cleanmarker:
+ * .oobfree = { {6, 10} }
+ * jffs2 seems to handle the above gracefully, but the current scheme seems
+ * safer. The only problem with it is that any code that parses oobfree must
+ * be able to handle out-of-order segments.
+ */
+static struct nand_ecclayout doc200x_oobinfo = {
+ .eccbytes = 6,
+ .eccpos = {0, 1, 2, 3, 4, 5},
+ .oobfree = {{8, 8}, {6, 2}}
+};
+
+/* Find the (I)NFTL Media Header, and optionally also the mirror media header.
+ On successful return, buf will contain a copy of the media header for
+ further processing. id is the string to scan for, and will presumably be
+ either "ANAND" or "BNAND". If findmirror=1, also look for the mirror media
+ header. The page #s of the found media headers are placed in mh0_page and
+ mh1_page in the DOC private structure. */
+static int __init find_media_headers(struct mtd_info *mtd, u_char *buf, const char *id, int findmirror)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ unsigned offs;
+ int ret;
+ size_t retlen;
+
+ for (offs = 0; offs < mtd->size; offs += mtd->erasesize) {
+ ret = mtd_read(mtd, offs, mtd->writesize, &retlen, buf);
+ if (retlen != mtd->writesize)
+ continue;
+ if (ret) {
+ printk(KERN_WARNING "ECC error scanning DOC at 0x%x\n", offs);
+ }
+ if (memcmp(buf, id, 6))
+ continue;
+ printk(KERN_INFO "Found DiskOnChip %s Media Header at 0x%x\n", id, offs);
+ if (doc->mh0_page == -1) {
+ doc->mh0_page = offs >> this->page_shift;
+ if (!findmirror)
+ return 1;
+ continue;
+ }
+ doc->mh1_page = offs >> this->page_shift;
+ return 2;
+ }
+ if (doc->mh0_page == -1) {
+ printk(KERN_WARNING "DiskOnChip %s Media Header not found.\n", id);
+ return 0;
+ }
+ /* Only one mediaheader was found. We want buf to contain a
+ mediaheader on return, so we'll have to re-read the one we found. */
+ offs = doc->mh0_page << this->page_shift;
+ ret = mtd_read(mtd, offs, mtd->writesize, &retlen, buf);
+ if (retlen != mtd->writesize) {
+ /* Insanity. Give up. */
+ printk(KERN_ERR "Read DiskOnChip Media Header once, but can't reread it???\n");
+ return 0;
+ }
+ return 1;
+}
+
+static inline int __init nftl_partscan(struct mtd_info *mtd, struct mtd_partition *parts)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ int ret = 0;
+ u_char *buf;
+ struct NFTLMediaHeader *mh;
+ const unsigned psize = 1 << this->page_shift;
+ int numparts = 0;
+ unsigned blocks, maxblocks;
+ int offs, numheaders;
+
+ buf = kmalloc(mtd->writesize, GFP_KERNEL);
+ if (!buf) {
+ return 0;
+ }
+ if (!(numheaders = find_media_headers(mtd, buf, "ANAND", 1)))
+ goto out;
+ mh = (struct NFTLMediaHeader *)buf;
+
+ le16_to_cpus(&mh->NumEraseUnits);
+ le16_to_cpus(&mh->FirstPhysicalEUN);
+ le32_to_cpus(&mh->FormattedSize);
+
+ printk(KERN_INFO " DataOrgID = %s\n"
+ " NumEraseUnits = %d\n"
+ " FirstPhysicalEUN = %d\n"
+ " FormattedSize = %d\n"
+ " UnitSizeFactor = %d\n",
+ mh->DataOrgID, mh->NumEraseUnits,
+ mh->FirstPhysicalEUN, mh->FormattedSize,
+ mh->UnitSizeFactor);
+
+ blocks = mtd->size >> this->phys_erase_shift;
+ maxblocks = min(32768U, mtd->erasesize - psize);
+
+ if (mh->UnitSizeFactor == 0x00) {
+ /* Auto-determine UnitSizeFactor. The constraints are:
+ - There can be at most 32768 virtual blocks.
+ - There can be at most (virtual block size - page size)
+ virtual blocks (because MediaHeader+BBT must fit in 1).
+ */
+ mh->UnitSizeFactor = 0xff;
+ while (blocks > maxblocks) {
+ blocks >>= 1;
+ maxblocks = min(32768U, (maxblocks << 1) + psize);
+ mh->UnitSizeFactor--;
+ }
+ printk(KERN_WARNING "UnitSizeFactor=0x00 detected. Correct value is assumed to be 0x%02x.\n", mh->UnitSizeFactor);
+ }
+
+ /* NOTE: The lines below modify internal variables of the NAND and MTD
+ layers; variables with have already been configured by nand_scan.
+ Unfortunately, we didn't know before this point what these values
+ should be. Thus, this code is somewhat dependent on the exact
+ implementation of the NAND layer. */
+ if (mh->UnitSizeFactor != 0xff) {
+ this->bbt_erase_shift += (0xff - mh->UnitSizeFactor);
+ mtd->erasesize <<= (0xff - mh->UnitSizeFactor);
+ printk(KERN_INFO "Setting virtual erase size to %d\n", mtd->erasesize);
+ blocks = mtd->size >> this->bbt_erase_shift;
+ maxblocks = min(32768U, mtd->erasesize - psize);
+ }
+
+ if (blocks > maxblocks) {
+ printk(KERN_ERR "UnitSizeFactor of 0x%02x is inconsistent with device size. Aborting.\n", mh->UnitSizeFactor);
+ goto out;
+ }
+
+ /* Skip past the media headers. */
+ offs = max(doc->mh0_page, doc->mh1_page);
+ offs <<= this->page_shift;
+ offs += mtd->erasesize;
+
+ if (show_firmware_partition == 1) {
+ parts[0].name = " DiskOnChip Firmware / Media Header partition";
+ parts[0].offset = 0;
+ parts[0].size = offs;
+ numparts = 1;
+ }
+
+ parts[numparts].name = " DiskOnChip BDTL partition";
+ parts[numparts].offset = offs;
+ parts[numparts].size = (mh->NumEraseUnits - numheaders) << this->bbt_erase_shift;
+
+ offs += parts[numparts].size;
+ numparts++;
+
+ if (offs < mtd->size) {
+ parts[numparts].name = " DiskOnChip Remainder partition";
+ parts[numparts].offset = offs;
+ parts[numparts].size = mtd->size - offs;
+ numparts++;
+ }
+
+ ret = numparts;
+ out:
+ kfree(buf);
+ return ret;
+}
+
+/* This is a stripped-down copy of the code in inftlmount.c */
+static inline int __init inftl_partscan(struct mtd_info *mtd, struct mtd_partition *parts)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ int ret = 0;
+ u_char *buf;
+ struct INFTLMediaHeader *mh;
+ struct INFTLPartition *ip;
+ int numparts = 0;
+ int blocks;
+ int vshift, lastvunit = 0;
+ int i;
+ int end = mtd->size;
+
+ if (inftl_bbt_write)
+ end -= (INFTL_BBT_RESERVED_BLOCKS << this->phys_erase_shift);
+
+ buf = kmalloc(mtd->writesize, GFP_KERNEL);
+ if (!buf) {
+ return 0;
+ }
+
+ if (!find_media_headers(mtd, buf, "BNAND", 0))
+ goto out;
+ doc->mh1_page = doc->mh0_page + (4096 >> this->page_shift);
+ mh = (struct INFTLMediaHeader *)buf;
+
+ le32_to_cpus(&mh->NoOfBootImageBlocks);
+ le32_to_cpus(&mh->NoOfBinaryPartitions);
+ le32_to_cpus(&mh->NoOfBDTLPartitions);
+ le32_to_cpus(&mh->BlockMultiplierBits);
+ le32_to_cpus(&mh->FormatFlags);
+ le32_to_cpus(&mh->PercentUsed);
+
+ printk(KERN_INFO " bootRecordID = %s\n"
+ " NoOfBootImageBlocks = %d\n"
+ " NoOfBinaryPartitions = %d\n"
+ " NoOfBDTLPartitions = %d\n"
+ " BlockMultiplerBits = %d\n"
+ " FormatFlgs = %d\n"
+ " OsakVersion = %d.%d.%d.%d\n"
+ " PercentUsed = %d\n",
+ mh->bootRecordID, mh->NoOfBootImageBlocks,
+ mh->NoOfBinaryPartitions,
+ mh->NoOfBDTLPartitions,
+ mh->BlockMultiplierBits, mh->FormatFlags,
+ ((unsigned char *) &mh->OsakVersion)[0] & 0xf,
+ ((unsigned char *) &mh->OsakVersion)[1] & 0xf,
+ ((unsigned char *) &mh->OsakVersion)[2] & 0xf,
+ ((unsigned char *) &mh->OsakVersion)[3] & 0xf,
+ mh->PercentUsed);
+
+ vshift = this->phys_erase_shift + mh->BlockMultiplierBits;
+
+ blocks = mtd->size >> vshift;
+ if (blocks > 32768) {
+ printk(KERN_ERR "BlockMultiplierBits=%d is inconsistent with device size. Aborting.\n", mh->BlockMultiplierBits);
+ goto out;
+ }
+
+ blocks = doc->chips_per_floor << (this->chip_shift - this->phys_erase_shift);
+ if (inftl_bbt_write && (blocks > mtd->erasesize)) {
+ printk(KERN_ERR "Writeable BBTs spanning more than one erase block are not yet supported. FIX ME!\n");
+ goto out;
+ }
+
+ /* Scan the partitions */
+ for (i = 0; (i < 4); i++) {
+ ip = &(mh->Partitions[i]);
+ le32_to_cpus(&ip->virtualUnits);
+ le32_to_cpus(&ip->firstUnit);
+ le32_to_cpus(&ip->lastUnit);
+ le32_to_cpus(&ip->flags);
+ le32_to_cpus(&ip->spareUnits);
+ le32_to_cpus(&ip->Reserved0);
+
+ printk(KERN_INFO " PARTITION[%d] ->\n"
+ " virtualUnits = %d\n"
+ " firstUnit = %d\n"
+ " lastUnit = %d\n"
+ " flags = 0x%x\n"
+ " spareUnits = %d\n",
+ i, ip->virtualUnits, ip->firstUnit,
+ ip->lastUnit, ip->flags,
+ ip->spareUnits);
+
+ if ((show_firmware_partition == 1) &&
+ (i == 0) && (ip->firstUnit > 0)) {
+ parts[0].name = " DiskOnChip IPL / Media Header partition";
+ parts[0].offset = 0;
+ parts[0].size = mtd->erasesize * ip->firstUnit;
+ numparts = 1;
+ }
+
+ if (ip->flags & INFTL_BINARY)
+ parts[numparts].name = " DiskOnChip BDK partition";
+ else
+ parts[numparts].name = " DiskOnChip BDTL partition";
+ parts[numparts].offset = ip->firstUnit << vshift;
+ parts[numparts].size = (1 + ip->lastUnit - ip->firstUnit) << vshift;
+ numparts++;
+ if (ip->lastUnit > lastvunit)
+ lastvunit = ip->lastUnit;
+ if (ip->flags & INFTL_LAST)
+ break;
+ }
+ lastvunit++;
+ if ((lastvunit << vshift) < end) {
+ parts[numparts].name = " DiskOnChip Remainder partition";
+ parts[numparts].offset = lastvunit << vshift;
+ parts[numparts].size = end - parts[numparts].offset;
+ numparts++;
+ }
+ ret = numparts;
+ out:
+ kfree(buf);
+ return ret;
+}
+
+static int __init nftl_scan_bbt(struct mtd_info *mtd)
+{
+ int ret, numparts;
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ struct mtd_partition parts[2];
+
+ memset((char *)parts, 0, sizeof(parts));
+ /* On NFTL, we have to find the media headers before we can read the
+ BBTs, since they're stored in the media header eraseblocks. */
+ numparts = nftl_partscan(mtd, parts);
+ if (!numparts)
+ return -EIO;
+ this->bbt_td->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT |
+ NAND_BBT_SAVECONTENT | NAND_BBT_WRITE |
+ NAND_BBT_VERSION;
+ this->bbt_td->veroffs = 7;
+ this->bbt_td->pages[0] = doc->mh0_page + 1;
+ if (doc->mh1_page != -1) {
+ this->bbt_md->options = NAND_BBT_ABSPAGE | NAND_BBT_8BIT |
+ NAND_BBT_SAVECONTENT | NAND_BBT_WRITE |
+ NAND_BBT_VERSION;
+ this->bbt_md->veroffs = 7;
+ this->bbt_md->pages[0] = doc->mh1_page + 1;
+ } else {
+ this->bbt_md = NULL;
+ }
+
+ ret = this->scan_bbt(mtd);
+ if (ret)
+ return ret;
+
+ return mtd_device_register(mtd, parts, no_autopart ? 0 : numparts);
+}
+
+static int __init inftl_scan_bbt(struct mtd_info *mtd)
+{
+ int ret, numparts;
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+ struct mtd_partition parts[5];
+
+ if (this->numchips > doc->chips_per_floor) {
+ printk(KERN_ERR "Multi-floor INFTL devices not yet supported.\n");
+ return -EIO;
+ }
+
+ if (DoC_is_MillenniumPlus(doc)) {
+ this->bbt_td->options = NAND_BBT_2BIT | NAND_BBT_ABSPAGE;
+ if (inftl_bbt_write)
+ this->bbt_td->options |= NAND_BBT_WRITE;
+ this->bbt_td->pages[0] = 2;
+ this->bbt_md = NULL;
+ } else {
+ this->bbt_td->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | NAND_BBT_VERSION;
+ if (inftl_bbt_write)
+ this->bbt_td->options |= NAND_BBT_WRITE;
+ this->bbt_td->offs = 8;
+ this->bbt_td->len = 8;
+ this->bbt_td->veroffs = 7;
+ this->bbt_td->maxblocks = INFTL_BBT_RESERVED_BLOCKS;
+ this->bbt_td->reserved_block_code = 0x01;
+ this->bbt_td->pattern = "MSYS_BBT";
+
+ this->bbt_md->options = NAND_BBT_LASTBLOCK | NAND_BBT_8BIT | NAND_BBT_VERSION;
+ if (inftl_bbt_write)
+ this->bbt_md->options |= NAND_BBT_WRITE;
+ this->bbt_md->offs = 8;
+ this->bbt_md->len = 8;
+ this->bbt_md->veroffs = 7;
+ this->bbt_md->maxblocks = INFTL_BBT_RESERVED_BLOCKS;
+ this->bbt_md->reserved_block_code = 0x01;
+ this->bbt_md->pattern = "TBB_SYSM";
+ }
+
+ ret = this->scan_bbt(mtd);
+ if (ret)
+ return ret;
+
+ memset((char *)parts, 0, sizeof(parts));
+ numparts = inftl_partscan(mtd, parts);
+ /* At least for now, require the INFTL Media Header. We could probably
+ do without it for non-INFTL use, since all it gives us is
+ autopartitioning, but I want to give it more thought. */
+ if (!numparts)
+ return -EIO;
+ return mtd_device_register(mtd, parts, no_autopart ? 0 : numparts);
+}
+
+static inline int __init doc2000_init(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+
+ this->read_byte = doc2000_read_byte;
+ this->write_buf = doc2000_writebuf;
+ this->read_buf = doc2000_readbuf;
+ doc->late_init = nftl_scan_bbt;
+
+ doc->CDSNControl = CDSN_CTRL_FLASH_IO | CDSN_CTRL_ECC_IO;
+ doc2000_count_chips(mtd);
+ mtd->name = "DiskOnChip 2000 (NFTL Model)";
+ return (4 * doc->chips_per_floor);
+}
+
+static inline int __init doc2001_init(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+
+ this->read_byte = doc2001_read_byte;
+ this->write_buf = doc2001_writebuf;
+ this->read_buf = doc2001_readbuf;
+
+ ReadDOC(doc->virtadr, ChipID);
+ ReadDOC(doc->virtadr, ChipID);
+ ReadDOC(doc->virtadr, ChipID);
+ if (ReadDOC(doc->virtadr, ChipID) != DOC_ChipID_DocMil) {
+ /* It's not a Millennium; it's one of the newer
+ DiskOnChip 2000 units with a similar ASIC.
+ Treat it like a Millennium, except that it
+ can have multiple chips. */
+ doc2000_count_chips(mtd);
+ mtd->name = "DiskOnChip 2000 (INFTL Model)";
+ doc->late_init = inftl_scan_bbt;
+ return (4 * doc->chips_per_floor);
+ } else {
+ /* Bog-standard Millennium */
+ doc->chips_per_floor = 1;
+ mtd->name = "DiskOnChip Millennium";
+ doc->late_init = nftl_scan_bbt;
+ return 1;
+ }
+}
+
+static inline int __init doc2001plus_init(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ struct doc_priv *doc = this->priv;
+
+ this->read_byte = doc2001plus_read_byte;
+ this->write_buf = doc2001plus_writebuf;
+ this->read_buf = doc2001plus_readbuf;
+ doc->late_init = inftl_scan_bbt;
+ this->cmd_ctrl = NULL;
+ this->select_chip = doc2001plus_select_chip;
+ this->cmdfunc = doc2001plus_command;
+ this->ecc.hwctl = doc2001plus_enable_hwecc;
+
+ doc->chips_per_floor = 1;
+ mtd->name = "DiskOnChip Millennium Plus";
+
+ return 1;
+}
+
+static int __init doc_probe(unsigned long physadr)
+{
+ unsigned char ChipID;
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ struct doc_priv *doc;
+ void __iomem *virtadr;
+ unsigned char save_control;
+ unsigned char tmp, tmpb, tmpc;
+ int reg, len, numchips;
+ int ret = 0;
+
+ if (!request_mem_region(physadr, DOC_IOREMAP_LEN, "DiskOnChip"))
+ return -EBUSY;
+ virtadr = ioremap(physadr, DOC_IOREMAP_LEN);
+ if (!virtadr) {
+ printk(KERN_ERR "Diskonchip ioremap failed: 0x%x bytes at 0x%lx\n", DOC_IOREMAP_LEN, physadr);
+ ret = -EIO;
+ goto error_ioremap;
+ }
+
+ /* It's not possible to cleanly detect the DiskOnChip - the
+ * bootup procedure will put the device into reset mode, and
+ * it's not possible to talk to it without actually writing
+ * to the DOCControl register. So we store the current contents
+ * of the DOCControl register's location, in case we later decide
+ * that it's not a DiskOnChip, and want to put it back how we
+ * found it.
+ */
+ save_control = ReadDOC(virtadr, DOCControl);
+
+ /* Reset the DiskOnChip ASIC */
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, virtadr, DOCControl);
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_RESET, virtadr, DOCControl);
+
+ /* Enable the DiskOnChip ASIC */
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, virtadr, DOCControl);
+ WriteDOC(DOC_MODE_CLR_ERR | DOC_MODE_MDWREN | DOC_MODE_NORMAL, virtadr, DOCControl);
+
+ ChipID = ReadDOC(virtadr, ChipID);
+
+ switch (ChipID) {
+ case DOC_ChipID_Doc2k:
+ reg = DoC_2k_ECCStatus;
+ break;
+ case DOC_ChipID_DocMil:
+ reg = DoC_ECCConf;
+ break;
+ case DOC_ChipID_DocMilPlus16:
+ case DOC_ChipID_DocMilPlus32:
+ case 0:
+ /* Possible Millennium Plus, need to do more checks */
+ /* Possibly release from power down mode */
+ for (tmp = 0; (tmp < 4); tmp++)
+ ReadDOC(virtadr, Mplus_Power);
+
+ /* Reset the Millennium Plus ASIC */
+ tmp = DOC_MODE_RESET | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT;
+ WriteDOC(tmp, virtadr, Mplus_DOCControl);
+ WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
+
+ mdelay(1);
+ /* Enable the Millennium Plus ASIC */
+ tmp = DOC_MODE_NORMAL | DOC_MODE_MDWREN | DOC_MODE_RST_LAT | DOC_MODE_BDECT;
+ WriteDOC(tmp, virtadr, Mplus_DOCControl);
+ WriteDOC(~tmp, virtadr, Mplus_CtrlConfirm);
+ mdelay(1);
+
+ ChipID = ReadDOC(virtadr, ChipID);
+
+ switch (ChipID) {
+ case DOC_ChipID_DocMilPlus16:
+ reg = DoC_Mplus_Toggle;
+ break;
+ case DOC_ChipID_DocMilPlus32:
+ printk(KERN_ERR "DiskOnChip Millennium Plus 32MB is not supported, ignoring.\n");
+ default:
+ ret = -ENODEV;
+ goto notfound;
+ }
+ break;
+
+ default:
+ ret = -ENODEV;
+ goto notfound;
+ }
+ /* Check the TOGGLE bit in the ECC register */
+ tmp = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+ tmpb = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+ tmpc = ReadDOC_(virtadr, reg) & DOC_TOGGLE_BIT;
+ if ((tmp == tmpb) || (tmp != tmpc)) {
+ printk(KERN_WARNING "Possible DiskOnChip at 0x%lx failed TOGGLE test, dropping.\n", physadr);
+ ret = -ENODEV;
+ goto notfound;
+ }
+
+ for (mtd = doclist; mtd; mtd = doc->nextdoc) {
+ unsigned char oldval;
+ unsigned char newval;
+ nand = mtd->priv;
+ doc = nand->priv;
+ /* Use the alias resolution register to determine if this is
+ in fact the same DOC aliased to a new address. If writes
+ to one chip's alias resolution register change the value on
+ the other chip, they're the same chip. */
+ if (ChipID == DOC_ChipID_DocMilPlus16) {
+ oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution);
+ newval = ReadDOC(virtadr, Mplus_AliasResolution);
+ } else {
+ oldval = ReadDOC(doc->virtadr, AliasResolution);
+ newval = ReadDOC(virtadr, AliasResolution);
+ }
+ if (oldval != newval)
+ continue;
+ if (ChipID == DOC_ChipID_DocMilPlus16) {
+ WriteDOC(~newval, virtadr, Mplus_AliasResolution);
+ oldval = ReadDOC(doc->virtadr, Mplus_AliasResolution);
+ WriteDOC(newval, virtadr, Mplus_AliasResolution); // restore it
+ } else {
+ WriteDOC(~newval, virtadr, AliasResolution);
+ oldval = ReadDOC(doc->virtadr, AliasResolution);
+ WriteDOC(newval, virtadr, AliasResolution); // restore it
+ }
+ newval = ~newval;
+ if (oldval == newval) {
+ printk(KERN_DEBUG "Found alias of DOC at 0x%lx to 0x%lx\n", doc->physadr, physadr);
+ goto notfound;
+ }
+ }
+
+ printk(KERN_NOTICE "DiskOnChip found at 0x%lx\n", physadr);
+
+ len = sizeof(struct mtd_info) +
+ sizeof(struct nand_chip) + sizeof(struct doc_priv) + (2 * sizeof(struct nand_bbt_descr));
+ mtd = kzalloc(len, GFP_KERNEL);
+ if (!mtd) {
+ ret = -ENOMEM;
+ goto fail;
+ }
+
+ nand = (struct nand_chip *) (mtd + 1);
+ doc = (struct doc_priv *) (nand + 1);
+ nand->bbt_td = (struct nand_bbt_descr *) (doc + 1);
+ nand->bbt_md = nand->bbt_td + 1;
+
+ mtd->priv = nand;
+ mtd->owner = THIS_MODULE;
+
+ nand->priv = doc;
+ nand->select_chip = doc200x_select_chip;
+ nand->cmd_ctrl = doc200x_hwcontrol;
+ nand->dev_ready = doc200x_dev_ready;
+ nand->waitfunc = doc200x_wait;
+ nand->block_bad = doc200x_block_bad;
+ nand->ecc.hwctl = doc200x_enable_hwecc;
+ nand->ecc.calculate = doc200x_calculate_ecc;
+ nand->ecc.correct = doc200x_correct_data;
+
+ nand->ecc.layout = &doc200x_oobinfo;
+ nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 6;
+ nand->ecc.strength = 2;
+ nand->bbt_options = NAND_BBT_USE_FLASH;
+ /* Skip the automatic BBT scan so we can run it manually */
+ nand->options |= NAND_SKIP_BBTSCAN;
+
+ doc->physadr = physadr;
+ doc->virtadr = virtadr;
+ doc->ChipID = ChipID;
+ doc->curfloor = -1;
+ doc->curchip = -1;
+ doc->mh0_page = -1;
+ doc->mh1_page = -1;
+ doc->nextdoc = doclist;
+
+ if (ChipID == DOC_ChipID_Doc2k)
+ numchips = doc2000_init(mtd);
+ else if (ChipID == DOC_ChipID_DocMilPlus16)
+ numchips = doc2001plus_init(mtd);
+ else
+ numchips = doc2001_init(mtd);
+
+ if ((ret = nand_scan(mtd, numchips)) || (ret = doc->late_init(mtd))) {
+ /* DBB note: i believe nand_release is necessary here, as
+ buffers may have been allocated in nand_base. Check with
+ Thomas. FIX ME! */
+ /* nand_release will call mtd_device_unregister, but we
+ haven't yet added it. This is handled without incident by
+ mtd_device_unregister, as far as I can tell. */
+ nand_release(mtd);
+ kfree(mtd);
+ goto fail;
+ }
+
+ /* Success! */
+ doclist = mtd;
+ return 0;
+
+ notfound:
+ /* Put back the contents of the DOCControl register, in case it's not
+ actually a DiskOnChip. */
+ WriteDOC(save_control, virtadr, DOCControl);
+ fail:
+ iounmap(virtadr);
+
+error_ioremap:
+ release_mem_region(physadr, DOC_IOREMAP_LEN);
+
+ return ret;
+}
+
+static void release_nanddoc(void)
+{
+ struct mtd_info *mtd, *nextmtd;
+ struct nand_chip *nand;
+ struct doc_priv *doc;
+
+ for (mtd = doclist; mtd; mtd = nextmtd) {
+ nand = mtd->priv;
+ doc = nand->priv;
+
+ nextmtd = doc->nextdoc;
+ nand_release(mtd);
+ iounmap(doc->virtadr);
+ release_mem_region(doc->physadr, DOC_IOREMAP_LEN);
+ kfree(mtd);
+ }
+}
+
+static int __init init_nanddoc(void)
+{
+ int i, ret = 0;
+
+ /* We could create the decoder on demand, if memory is a concern.
+ * This way we have it handy, if an error happens
+ *
+ * Symbolsize is 10 (bits)
+ * Primitve polynomial is x^10+x^3+1
+ * first consecutive root is 510
+ * primitve element to generate roots = 1
+ * generator polinomial degree = 4
+ */
+ rs_decoder = init_rs(10, 0x409, FCR, 1, NROOTS);
+ if (!rs_decoder) {
+ printk(KERN_ERR "DiskOnChip: Could not create a RS decoder\n");
+ return -ENOMEM;
+ }
+
+ if (doc_config_location) {
+ printk(KERN_INFO "Using configured DiskOnChip probe address 0x%lx\n", doc_config_location);
+ ret = doc_probe(doc_config_location);
+ if (ret < 0)
+ goto outerr;
+ } else {
+ for (i = 0; (doc_locations[i] != 0xffffffff); i++) {
+ doc_probe(doc_locations[i]);
+ }
+ }
+ /* No banner message any more. Print a message if no DiskOnChip
+ found, so the user knows we at least tried. */
+ if (!doclist) {
+ printk(KERN_INFO "No valid DiskOnChip devices found\n");
+ ret = -ENODEV;
+ goto outerr;
+ }
+ return 0;
+ outerr:
+ free_rs(rs_decoder);
+ return ret;
+}
+
+static void __exit cleanup_nanddoc(void)
+{
+ /* Cleanup the nand/DoC resources */
+ release_nanddoc();
+
+ /* Free the reed solomon resources */
+ if (rs_decoder) {
+ free_rs(rs_decoder);
+ }
+}
+
+module_init(init_nanddoc);
+module_exit(cleanup_nanddoc);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>");
+MODULE_DESCRIPTION("M-Systems DiskOnChip 2000, Millennium and Millennium Plus device driver");
diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c
new file mode 100644
index 0000000..408cf69
--- /dev/null
+++ b/drivers/mtd/nand/docg4.c
@@ -0,0 +1,1393 @@
+/*
+ * Copyright © 2012 Mike Dunn <mikedunn@newsguy.com>
+ *
+ * mtd nand driver for M-Systems DiskOnChip G4
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Tested on the Palm Treo 680. The G4 is also present on Toshiba Portege, Asus
+ * P526, some HTC smartphones (Wizard, Prophet, ...), O2 XDA Zinc, maybe others.
+ * Should work on these as well. Let me know!
+ *
+ * TODO:
+ *
+ * Mechanism for management of password-protected areas
+ *
+ * Hamming ecc when reading oob only
+ *
+ * According to the M-Sys documentation, this device is also available in a
+ * "dual-die" configuration having a 256MB capacity, but no mechanism for
+ * detecting this variant is documented. Currently this driver assumes 128MB
+ * capacity.
+ *
+ * Support for multiple cascaded devices ("floors"). Not sure which gadgets
+ * contain multiple G4s in a cascaded configuration, if any.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/string.h>
+#include <linux/sched.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/bitops.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/bch.h>
+#include <linux/bitrev.h>
+#include <linux/jiffies.h>
+
+/*
+ * In "reliable mode" consecutive 2k pages are used in parallel (in some
+ * fashion) to store the same data. The data can be read back from the
+ * even-numbered pages in the normal manner; odd-numbered pages will appear to
+ * contain junk. Systems that boot from the docg4 typically write the secondary
+ * program loader (SPL) code in this mode. The SPL is loaded by the initial
+ * program loader (IPL, stored in the docg4's 2k NOR-like region that is mapped
+ * to the reset vector address). This module parameter enables you to use this
+ * driver to write the SPL. When in this mode, no more than 2k of data can be
+ * written at a time, because the addresses do not increment in the normal
+ * manner, and the starting offset must be within an even-numbered 2k region;
+ * i.e., invalid starting offsets are 0x800, 0xa00, 0xc00, 0xe00, 0x1800,
+ * 0x1a00, ... Reliable mode is a special case and should not be used unless
+ * you know what you're doing.
+ */
+static bool reliable_mode;
+module_param(reliable_mode, bool, 0);
+MODULE_PARM_DESC(reliable_mode, "pages are programmed in reliable mode");
+
+/*
+ * You'll want to ignore badblocks if you're reading a partition that contains
+ * data written by the TrueFFS library (i.e., by PalmOS, Windows, etc), since
+ * it does not use mtd nand's method for marking bad blocks (using oob area).
+ * This will also skip the check of the "page written" flag.
+ */
+static bool ignore_badblocks;
+module_param(ignore_badblocks, bool, 0);
+MODULE_PARM_DESC(ignore_badblocks, "no badblock checking performed");
+
+struct docg4_priv {
+ struct mtd_info *mtd;
+ struct device *dev;
+ void __iomem *virtadr;
+ int status;
+ struct {
+ unsigned int command;
+ int column;
+ int page;
+ } last_command;
+ uint8_t oob_buf[16];
+ uint8_t ecc_buf[7];
+ int oob_page;
+ struct bch_control *bch;
+};
+
+/*
+ * Defines prefixed with DOCG4 are unique to the diskonchip G4. All others are
+ * shared with other diskonchip devices (P3, G3 at least).
+ *
+ * Functions with names prefixed with docg4_ are mtd / nand interface functions
+ * (though they may also be called internally). All others are internal.
+ */
+
+#define DOC_IOSPACE_DATA 0x0800
+
+/* register offsets */
+#define DOC_CHIPID 0x1000
+#define DOC_DEVICESELECT 0x100a
+#define DOC_ASICMODE 0x100c
+#define DOC_DATAEND 0x101e
+#define DOC_NOP 0x103e
+
+#define DOC_FLASHSEQUENCE 0x1032
+#define DOC_FLASHCOMMAND 0x1034
+#define DOC_FLASHADDRESS 0x1036
+#define DOC_FLASHCONTROL 0x1038
+#define DOC_ECCCONF0 0x1040
+#define DOC_ECCCONF1 0x1042
+#define DOC_HAMMINGPARITY 0x1046
+#define DOC_BCH_SYNDROM(idx) (0x1048 + idx)
+
+#define DOC_ASICMODECONFIRM 0x1072
+#define DOC_CHIPID_INV 0x1074
+#define DOC_POWERMODE 0x107c
+
+#define DOCG4_MYSTERY_REG 0x1050
+
+/* apparently used only to write oob bytes 6 and 7 */
+#define DOCG4_OOB_6_7 0x1052
+
+/* DOC_FLASHSEQUENCE register commands */
+#define DOC_SEQ_RESET 0x00
+#define DOCG4_SEQ_PAGE_READ 0x03
+#define DOCG4_SEQ_FLUSH 0x29
+#define DOCG4_SEQ_PAGEWRITE 0x16
+#define DOCG4_SEQ_PAGEPROG 0x1e
+#define DOCG4_SEQ_BLOCKERASE 0x24
+#define DOCG4_SEQ_SETMODE 0x45
+
+/* DOC_FLASHCOMMAND register commands */
+#define DOCG4_CMD_PAGE_READ 0x00
+#define DOC_CMD_ERASECYCLE2 0xd0
+#define DOCG4_CMD_FLUSH 0x70
+#define DOCG4_CMD_READ2 0x30
+#define DOC_CMD_PROG_BLOCK_ADDR 0x60
+#define DOCG4_CMD_PAGEWRITE 0x80
+#define DOC_CMD_PROG_CYCLE2 0x10
+#define DOCG4_CMD_FAST_MODE 0xa3 /* functionality guessed */
+#define DOC_CMD_RELIABLE_MODE 0x22
+#define DOC_CMD_RESET 0xff
+
+/* DOC_POWERMODE register bits */
+#define DOC_POWERDOWN_READY 0x80
+
+/* DOC_FLASHCONTROL register bits */
+#define DOC_CTRL_CE 0x10
+#define DOC_CTRL_UNKNOWN 0x40
+#define DOC_CTRL_FLASHREADY 0x01
+
+/* DOC_ECCCONF0 register bits */
+#define DOC_ECCCONF0_READ_MODE 0x8000
+#define DOC_ECCCONF0_UNKNOWN 0x2000
+#define DOC_ECCCONF0_ECC_ENABLE 0x1000
+#define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff
+
+/* DOC_ECCCONF1 register bits */
+#define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80
+#define DOC_ECCCONF1_ECC_ENABLE 0x07
+#define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20
+
+/* DOC_ASICMODE register bits */
+#define DOC_ASICMODE_RESET 0x00
+#define DOC_ASICMODE_NORMAL 0x01
+#define DOC_ASICMODE_POWERDOWN 0x02
+#define DOC_ASICMODE_MDWREN 0x04
+#define DOC_ASICMODE_BDETCT_RESET 0x08
+#define DOC_ASICMODE_RSTIN_RESET 0x10
+#define DOC_ASICMODE_RAM_WE 0x20
+
+/* good status values read after read/write/erase operations */
+#define DOCG4_PROGSTATUS_GOOD 0x51
+#define DOCG4_PROGSTATUS_GOOD_2 0xe0
+
+/*
+ * On read operations (page and oob-only), the first byte read from I/O reg is a
+ * status. On error, it reads 0x73; otherwise, it reads either 0x71 (first read
+ * after reset only) or 0x51, so bit 1 is presumed to be an error indicator.
+ */
+#define DOCG4_READ_ERROR 0x02 /* bit 1 indicates read error */
+
+/* anatomy of the device */
+#define DOCG4_CHIP_SIZE 0x8000000
+#define DOCG4_PAGE_SIZE 0x200
+#define DOCG4_PAGES_PER_BLOCK 0x200
+#define DOCG4_BLOCK_SIZE (DOCG4_PAGES_PER_BLOCK * DOCG4_PAGE_SIZE)
+#define DOCG4_NUMBLOCKS (DOCG4_CHIP_SIZE / DOCG4_BLOCK_SIZE)
+#define DOCG4_OOB_SIZE 0x10
+#define DOCG4_CHIP_SHIFT 27 /* log_2(DOCG4_CHIP_SIZE) */
+#define DOCG4_PAGE_SHIFT 9 /* log_2(DOCG4_PAGE_SIZE) */
+#define DOCG4_ERASE_SHIFT 18 /* log_2(DOCG4_BLOCK_SIZE) */
+
+/* all but the last byte is included in ecc calculation */
+#define DOCG4_BCH_SIZE (DOCG4_PAGE_SIZE + DOCG4_OOB_SIZE - 1)
+
+#define DOCG4_USERDATA_LEN 520 /* 512 byte page plus 8 oob avail to user */
+
+/* expected values from the ID registers */
+#define DOCG4_IDREG1_VALUE 0x0400
+#define DOCG4_IDREG2_VALUE 0xfbff
+
+/* primitive polynomial used to build the Galois field used by hw ecc gen */
+#define DOCG4_PRIMITIVE_POLY 0x4443
+
+#define DOCG4_M 14 /* Galois field is of order 2^14 */
+#define DOCG4_T 4 /* BCH alg corrects up to 4 bit errors */
+
+#define DOCG4_FACTORY_BBT_PAGE 16 /* page where read-only factory bbt lives */
+#define DOCG4_REDUNDANT_BBT_PAGE 24 /* page where redundant factory bbt lives */
+
+/*
+ * Bytes 0, 1 are used as badblock marker.
+ * Bytes 2 - 6 are available to the user.
+ * Byte 7 is hamming ecc for first 7 oob bytes only.
+ * Bytes 8 - 14 are hw-generated ecc covering entire page + oob bytes 0 - 14.
+ * Byte 15 (the last) is used by the driver as a "page written" flag.
+ */
+static struct nand_ecclayout docg4_oobinfo = {
+ .eccbytes = 9,
+ .eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
+ .oobavail = 5,
+ .oobfree = { {.offset = 2, .length = 5} }
+};
+
+/*
+ * The device has a nop register which M-Sys claims is for the purpose of
+ * inserting precise delays. But beware; at least some operations fail if the
+ * nop writes are replaced with a generic delay!
+ */
+static inline void write_nop(void __iomem *docptr)
+{
+ writew(0, docptr + DOC_NOP);
+}
+
+static void docg4_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *nand = mtd->priv;
+ uint16_t *p = (uint16_t *) buf;
+ len >>= 1;
+
+ for (i = 0; i < len; i++)
+ p[i] = readw(nand->IO_ADDR_R);
+}
+
+static void docg4_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *nand = mtd->priv;
+ uint16_t *p = (uint16_t *) buf;
+ len >>= 1;
+
+ for (i = 0; i < len; i++)
+ writew(p[i], nand->IO_ADDR_W);
+}
+
+static int poll_status(struct docg4_priv *doc)
+{
+ /*
+ * Busy-wait for the FLASHREADY bit to be set in the FLASHCONTROL
+ * register. Operations known to take a long time (e.g., block erase)
+ * should sleep for a while before calling this.
+ */
+
+ uint16_t flash_status;
+ unsigned long timeo;
+ void __iomem *docptr = doc->virtadr;
+
+ dev_dbg(doc->dev, "%s...\n", __func__);
+
+ /* hardware quirk requires reading twice initially */
+ flash_status = readw(docptr + DOC_FLASHCONTROL);
+
+ timeo = jiffies + msecs_to_jiffies(200); /* generous timeout */
+ do {
+ cpu_relax();
+ flash_status = readb(docptr + DOC_FLASHCONTROL);
+ } while (!(flash_status & DOC_CTRL_FLASHREADY) &&
+ time_before(jiffies, timeo));
+
+ if (unlikely(!(flash_status & DOC_CTRL_FLASHREADY))) {
+ dev_err(doc->dev, "%s: timed out!\n", __func__);
+ return NAND_STATUS_FAIL;
+ }
+
+ return 0;
+}
+
+
+static int docg4_wait(struct mtd_info *mtd, struct nand_chip *nand)
+{
+
+ struct docg4_priv *doc = nand->priv;
+ int status = NAND_STATUS_WP; /* inverse logic?? */
+ dev_dbg(doc->dev, "%s...\n", __func__);
+
+ /* report any previously unreported error */
+ if (doc->status) {
+ status |= doc->status;
+ doc->status = 0;
+ return status;
+ }
+
+ status |= poll_status(doc);
+ return status;
+}
+
+static void docg4_select_chip(struct mtd_info *mtd, int chip)
+{
+ /*
+ * Select among multiple cascaded chips ("floors"). Multiple floors are
+ * not yet supported, so the only valid non-negative value is 0.
+ */
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ dev_dbg(doc->dev, "%s: chip %d\n", __func__, chip);
+
+ if (chip < 0)
+ return; /* deselected */
+
+ if (chip > 0)
+ dev_warn(doc->dev, "multiple floors currently unsupported\n");
+
+ writew(0, docptr + DOC_DEVICESELECT);
+}
+
+static void reset(struct mtd_info *mtd)
+{
+ /* full device reset */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ writew(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN,
+ docptr + DOC_ASICMODE);
+ writew(~(DOC_ASICMODE_RESET | DOC_ASICMODE_MDWREN),
+ docptr + DOC_ASICMODECONFIRM);
+ write_nop(docptr);
+
+ writew(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN,
+ docptr + DOC_ASICMODE);
+ writew(~(DOC_ASICMODE_NORMAL | DOC_ASICMODE_MDWREN),
+ docptr + DOC_ASICMODECONFIRM);
+
+ writew(DOC_ECCCONF1_ECC_ENABLE, docptr + DOC_ECCCONF1);
+
+ poll_status(doc);
+}
+
+static void read_hw_ecc(void __iomem *docptr, uint8_t *ecc_buf)
+{
+ /* read the 7 hw-generated ecc bytes */
+
+ int i;
+ for (i = 0; i < 7; i++) { /* hw quirk; read twice */
+ ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i));
+ ecc_buf[i] = readb(docptr + DOC_BCH_SYNDROM(i));
+ }
+}
+
+static int correct_data(struct mtd_info *mtd, uint8_t *buf, int page)
+{
+ /*
+ * Called after a page read when hardware reports bitflips.
+ * Up to four bitflips can be corrected.
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ int i, numerrs, errpos[4];
+ const uint8_t blank_read_hwecc[8] = {
+ 0xcf, 0x72, 0xfc, 0x1b, 0xa9, 0xc7, 0xb9, 0 };
+
+ read_hw_ecc(docptr, doc->ecc_buf); /* read 7 hw-generated ecc bytes */
+
+ /* check if read error is due to a blank page */
+ if (!memcmp(doc->ecc_buf, blank_read_hwecc, 7))
+ return 0; /* yes */
+
+ /* skip additional check of "written flag" if ignore_badblocks */
+ if (ignore_badblocks == false) {
+
+ /*
+ * If the hw ecc bytes are not those of a blank page, there's
+ * still a chance that the page is blank, but was read with
+ * errors. Check the "written flag" in last oob byte, which
+ * is set to zero when a page is written. If more than half
+ * the bits are set, assume a blank page. Unfortunately, the
+ * bit flips(s) are not reported in stats.
+ */
+
+ if (nand->oob_poi[15]) {
+ int bit, numsetbits = 0;
+ unsigned long written_flag = nand->oob_poi[15];
+ for_each_set_bit(bit, &written_flag, 8)
+ numsetbits++;
+ if (numsetbits > 4) { /* assume blank */
+ dev_warn(doc->dev,
+ "error(s) in blank page "
+ "at offset %08x\n",
+ page * DOCG4_PAGE_SIZE);
+ return 0;
+ }
+ }
+ }
+
+ /*
+ * The hardware ecc unit produces oob_ecc ^ calc_ecc. The kernel's bch
+ * algorithm is used to decode this. However the hw operates on page
+ * data in a bit order that is the reverse of that of the bch alg,
+ * requiring that the bits be reversed on the result. Thanks to Ivan
+ * Djelic for his analysis!
+ */
+ for (i = 0; i < 7; i++)
+ doc->ecc_buf[i] = bitrev8(doc->ecc_buf[i]);
+
+ numerrs = decode_bch(doc->bch, NULL, DOCG4_USERDATA_LEN, NULL,
+ doc->ecc_buf, NULL, errpos);
+
+ if (numerrs == -EBADMSG) {
+ dev_warn(doc->dev, "uncorrectable errors at offset %08x\n",
+ page * DOCG4_PAGE_SIZE);
+ return -EBADMSG;
+ }
+
+ BUG_ON(numerrs < 0); /* -EINVAL, or anything other than -EBADMSG */
+
+ /* undo last step in BCH alg (modulo mirroring not needed) */
+ for (i = 0; i < numerrs; i++)
+ errpos[i] = (errpos[i] & ~7)|(7-(errpos[i] & 7));
+
+ /* fix the errors */
+ for (i = 0; i < numerrs; i++) {
+
+ /* ignore if error within oob ecc bytes */
+ if (errpos[i] > DOCG4_USERDATA_LEN * 8)
+ continue;
+
+ /* if error within oob area preceeding ecc bytes... */
+ if (errpos[i] > DOCG4_PAGE_SIZE * 8)
+ change_bit(errpos[i] - DOCG4_PAGE_SIZE * 8,
+ (unsigned long *)nand->oob_poi);
+
+ else /* error in page data */
+ change_bit(errpos[i], (unsigned long *)buf);
+ }
+
+ dev_notice(doc->dev, "%d error(s) corrected at offset %08x\n",
+ numerrs, page * DOCG4_PAGE_SIZE);
+
+ return numerrs;
+}
+
+static uint8_t docg4_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+
+ dev_dbg(doc->dev, "%s\n", __func__);
+
+ if (doc->last_command.command == NAND_CMD_STATUS) {
+ int status;
+
+ /*
+ * Previous nand command was status request, so nand
+ * infrastructure code expects to read the status here. If an
+ * error occurred in a previous operation, report it.
+ */
+ doc->last_command.command = 0;
+
+ if (doc->status) {
+ status = doc->status;
+ doc->status = 0;
+ }
+
+ /* why is NAND_STATUS_WP inverse logic?? */
+ else
+ status = NAND_STATUS_WP | NAND_STATUS_READY;
+
+ return status;
+ }
+
+ dev_warn(doc->dev, "unexpected call to read_byte()\n");
+
+ return 0;
+}
+
+static void write_addr(struct docg4_priv *doc, uint32_t docg4_addr)
+{
+ /* write the four address bytes packed in docg4_addr to the device */
+
+ void __iomem *docptr = doc->virtadr;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+ docg4_addr >>= 8;
+ writeb(docg4_addr & 0xff, docptr + DOC_FLASHADDRESS);
+}
+
+static int read_progstatus(struct docg4_priv *doc)
+{
+ /*
+ * This apparently checks the status of programming. Done after an
+ * erasure, and after page data is written. On error, the status is
+ * saved, to be later retrieved by the nand infrastructure code.
+ */
+ void __iomem *docptr = doc->virtadr;
+
+ /* status is read from the I/O reg */
+ uint16_t status1 = readw(docptr + DOC_IOSPACE_DATA);
+ uint16_t status2 = readw(docptr + DOC_IOSPACE_DATA);
+ uint16_t status3 = readw(docptr + DOCG4_MYSTERY_REG);
+
+ dev_dbg(doc->dev, "docg4: %s: %02x %02x %02x\n",
+ __func__, status1, status2, status3);
+
+ if (status1 != DOCG4_PROGSTATUS_GOOD
+ || status2 != DOCG4_PROGSTATUS_GOOD_2
+ || status3 != DOCG4_PROGSTATUS_GOOD_2) {
+ doc->status = NAND_STATUS_FAIL;
+ dev_warn(doc->dev, "read_progstatus failed: "
+ "%02x, %02x, %02x\n", status1, status2, status3);
+ return -EIO;
+ }
+ return 0;
+}
+
+static int pageprog(struct mtd_info *mtd)
+{
+ /*
+ * Final step in writing a page. Writes the contents of its
+ * internal buffer out to the flash array, or some such.
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ int retval = 0;
+
+ dev_dbg(doc->dev, "docg4: %s\n", __func__);
+
+ writew(DOCG4_SEQ_PAGEPROG, docptr + DOC_FLASHSEQUENCE);
+ writew(DOC_CMD_PROG_CYCLE2, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* Just busy-wait; usleep_range() slows things down noticeably. */
+ poll_status(doc);
+
+ writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND);
+ writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ retval = read_progstatus(doc);
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+ poll_status(doc);
+ write_nop(docptr);
+
+ return retval;
+}
+
+static void sequence_reset(struct mtd_info *mtd)
+{
+ /* common starting sequence for all operations */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ writew(DOC_CTRL_UNKNOWN | DOC_CTRL_CE, docptr + DOC_FLASHCONTROL);
+ writew(DOC_SEQ_RESET, docptr + DOC_FLASHSEQUENCE);
+ writew(DOC_CMD_RESET, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+ poll_status(doc);
+ write_nop(docptr);
+}
+
+static void read_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr)
+{
+ /* first step in reading a page */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ dev_dbg(doc->dev,
+ "docg4: %s: g4 page %08x\n", __func__, docg4_addr);
+
+ sequence_reset(mtd);
+
+ writew(DOCG4_SEQ_PAGE_READ, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_PAGE_READ, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+
+ write_addr(doc, docg4_addr);
+
+ write_nop(docptr);
+ writew(DOCG4_CMD_READ2, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ poll_status(doc);
+}
+
+static void write_page_prologue(struct mtd_info *mtd, uint32_t docg4_addr)
+{
+ /* first step in writing a page */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+
+ dev_dbg(doc->dev,
+ "docg4: %s: g4 addr: %x\n", __func__, docg4_addr);
+ sequence_reset(mtd);
+
+ if (unlikely(reliable_mode)) {
+ writew(DOCG4_SEQ_SETMODE, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_FAST_MODE, docptr + DOC_FLASHCOMMAND);
+ writew(DOC_CMD_RELIABLE_MODE, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ }
+
+ writew(DOCG4_SEQ_PAGEWRITE, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_PAGEWRITE, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_addr(doc, docg4_addr);
+ write_nop(docptr);
+ write_nop(docptr);
+ poll_status(doc);
+}
+
+static uint32_t mtd_to_docg4_address(int page, int column)
+{
+ /*
+ * Convert mtd address to format used by the device, 32 bit packed.
+ *
+ * Some notes on G4 addressing... The M-Sys documentation on this device
+ * claims that pages are 2K in length, and indeed, the format of the
+ * address used by the device reflects that. But within each page are
+ * four 512 byte "sub-pages", each with its own oob data that is
+ * read/written immediately after the 512 bytes of page data. This oob
+ * data contains the ecc bytes for the preceeding 512 bytes.
+ *
+ * Rather than tell the mtd nand infrastructure that page size is 2k,
+ * with four sub-pages each, we engage in a little subterfuge and tell
+ * the infrastructure code that pages are 512 bytes in size. This is
+ * done because during the course of reverse-engineering the device, I
+ * never observed an instance where an entire 2K "page" was read or
+ * written as a unit. Each "sub-page" is always addressed individually,
+ * its data read/written, and ecc handled before the next "sub-page" is
+ * addressed.
+ *
+ * This requires us to convert addresses passed by the mtd nand
+ * infrastructure code to those used by the device.
+ *
+ * The address that is written to the device consists of four bytes: the
+ * first two are the 2k page number, and the second is the index into
+ * the page. The index is in terms of 16-bit half-words and includes
+ * the preceeding oob data, so e.g., the index into the second
+ * "sub-page" is 0x108, and the full device address of the start of mtd
+ * page 0x201 is 0x00800108.
+ */
+ int g4_page = page / 4; /* device's 2K page */
+ int g4_index = (page % 4) * 0x108 + column/2; /* offset into page */
+ return (g4_page << 16) | g4_index; /* pack */
+}
+
+static void docg4_command(struct mtd_info *mtd, unsigned command, int column,
+ int page_addr)
+{
+ /* handle standard nand commands */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ uint32_t g4_addr = mtd_to_docg4_address(page_addr, column);
+
+ dev_dbg(doc->dev, "%s %x, page_addr=%x, column=%x\n",
+ __func__, command, page_addr, column);
+
+ /*
+ * Save the command and its arguments. This enables emulation of
+ * standard flash devices, and also some optimizations.
+ */
+ doc->last_command.command = command;
+ doc->last_command.column = column;
+ doc->last_command.page = page_addr;
+
+ switch (command) {
+
+ case NAND_CMD_RESET:
+ reset(mtd);
+ break;
+
+ case NAND_CMD_READ0:
+ read_page_prologue(mtd, g4_addr);
+ break;
+
+ case NAND_CMD_STATUS:
+ /* next call to read_byte() will expect a status */
+ break;
+
+ case NAND_CMD_SEQIN:
+ if (unlikely(reliable_mode)) {
+ uint16_t g4_page = g4_addr >> 16;
+
+ /* writes to odd-numbered 2k pages are invalid */
+ if (g4_page & 0x01)
+ dev_warn(doc->dev,
+ "invalid reliable mode address\n");
+ }
+
+ write_page_prologue(mtd, g4_addr);
+
+ /* hack for deferred write of oob bytes */
+ if (doc->oob_page == page_addr)
+ memcpy(nand->oob_poi, doc->oob_buf, 16);
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ pageprog(mtd);
+ break;
+
+ /* we don't expect these, based on review of nand_base.c */
+ case NAND_CMD_READOOB:
+ case NAND_CMD_READID:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ dev_warn(doc->dev, "docg4_command: "
+ "unexpected nand command 0x%x\n", command);
+ break;
+
+ }
+}
+
+static int read_page(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int page, bool use_ecc)
+{
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint16_t status, edc_err, *buf16;
+ int bits_corrected = 0;
+
+ dev_dbg(doc->dev, "%s: page %08x\n", __func__, page);
+
+ writew(DOC_ECCCONF0_READ_MODE |
+ DOC_ECCCONF0_ECC_ENABLE |
+ DOC_ECCCONF0_UNKNOWN |
+ DOCG4_BCH_SIZE,
+ docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* the 1st byte from the I/O reg is a status; the rest is page data */
+ status = readw(docptr + DOC_IOSPACE_DATA);
+ if (status & DOCG4_READ_ERROR) {
+ dev_err(doc->dev,
+ "docg4_read_page: bad status: 0x%02x\n", status);
+ writew(0, docptr + DOC_DATAEND);
+ return -EIO;
+ }
+
+ dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status);
+
+ docg4_read_buf(mtd, buf, DOCG4_PAGE_SIZE); /* read the page data */
+
+ /* this device always reads oob after page data */
+ /* first 14 oob bytes read from I/O reg */
+ docg4_read_buf(mtd, nand->oob_poi, 14);
+
+ /* last 2 read from another reg */
+ buf16 = (uint16_t *)(nand->oob_poi + 14);
+ *buf16 = readw(docptr + DOCG4_MYSTERY_REG);
+
+ write_nop(docptr);
+
+ if (likely(use_ecc == true)) {
+
+ /* read the register that tells us if bitflip(s) detected */
+ edc_err = readw(docptr + DOC_ECCCONF1);
+ edc_err = readw(docptr + DOC_ECCCONF1);
+ dev_dbg(doc->dev, "%s: edc_err = 0x%02x\n", __func__, edc_err);
+
+ /* If bitflips are reported, attempt to correct with ecc */
+ if (edc_err & DOC_ECCCONF1_BCH_SYNDROM_ERR) {
+ bits_corrected = correct_data(mtd, buf, page);
+ if (bits_corrected == -EBADMSG)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += bits_corrected;
+ }
+ }
+
+ writew(0, docptr + DOC_DATAEND);
+ if (bits_corrected == -EBADMSG) /* uncorrectable errors */
+ return 0;
+ return bits_corrected;
+}
+
+
+static int docg4_read_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int oob_required, int page)
+{
+ return read_page(mtd, nand, buf, page, false);
+}
+
+static int docg4_read_page(struct mtd_info *mtd, struct nand_chip *nand,
+ uint8_t *buf, int oob_required, int page)
+{
+ return read_page(mtd, nand, buf, page, true);
+}
+
+static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand,
+ int page)
+{
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint16_t status;
+
+ dev_dbg(doc->dev, "%s: page %x\n", __func__, page);
+
+ docg4_command(mtd, NAND_CMD_READ0, nand->ecc.size, page);
+
+ writew(DOC_ECCCONF0_READ_MODE | DOCG4_OOB_SIZE, docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* the 1st byte from the I/O reg is a status; the rest is oob data */
+ status = readw(docptr + DOC_IOSPACE_DATA);
+ if (status & DOCG4_READ_ERROR) {
+ dev_warn(doc->dev,
+ "docg4_read_oob failed: status = 0x%02x\n", status);
+ return -EIO;
+ }
+
+ dev_dbg(doc->dev, "%s: status = 0x%x\n", __func__, status);
+
+ docg4_read_buf(mtd, nand->oob_poi, 16);
+
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+
+ return 0;
+}
+
+static int docg4_erase_block(struct mtd_info *mtd, int page)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint16_t g4_page;
+
+ dev_dbg(doc->dev, "%s: page %04x\n", __func__, page);
+
+ sequence_reset(mtd);
+
+ writew(DOCG4_SEQ_BLOCKERASE, docptr + DOC_FLASHSEQUENCE);
+ writew(DOC_CMD_PROG_BLOCK_ADDR, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+
+ /* only 2 bytes of address are written to specify erase block */
+ g4_page = (uint16_t)(page / 4); /* to g4's 2k page addressing */
+ writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS);
+ g4_page >>= 8;
+ writeb(g4_page & 0xff, docptr + DOC_FLASHADDRESS);
+ write_nop(docptr);
+
+ /* start the erasure */
+ writew(DOC_CMD_ERASECYCLE2, docptr + DOC_FLASHCOMMAND);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ usleep_range(500, 1000); /* erasure is long; take a snooze */
+ poll_status(doc);
+ writew(DOCG4_SEQ_FLUSH, docptr + DOC_FLASHSEQUENCE);
+ writew(DOCG4_CMD_FLUSH, docptr + DOC_FLASHCOMMAND);
+ writew(DOC_ECCCONF0_READ_MODE | 4, docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+ write_nop(docptr);
+
+ read_progstatus(doc);
+
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+ poll_status(doc);
+ write_nop(docptr);
+
+ return nand->waitfunc(mtd, nand);
+}
+
+static int write_page(struct mtd_info *mtd, struct nand_chip *nand,
+ const uint8_t *buf, bool use_ecc)
+{
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint8_t ecc_buf[8];
+
+ dev_dbg(doc->dev, "%s...\n", __func__);
+
+ writew(DOC_ECCCONF0_ECC_ENABLE |
+ DOC_ECCCONF0_UNKNOWN |
+ DOCG4_BCH_SIZE,
+ docptr + DOC_ECCCONF0);
+ write_nop(docptr);
+
+ /* write the page data */
+ docg4_write_buf16(mtd, buf, DOCG4_PAGE_SIZE);
+
+ /* oob bytes 0 through 5 are written to I/O reg */
+ docg4_write_buf16(mtd, nand->oob_poi, 6);
+
+ /* oob byte 6 written to a separate reg */
+ writew(nand->oob_poi[6], docptr + DOCG4_OOB_6_7);
+
+ write_nop(docptr);
+ write_nop(docptr);
+
+ /* write hw-generated ecc bytes to oob */
+ if (likely(use_ecc == true)) {
+ /* oob byte 7 is hamming code */
+ uint8_t hamming = readb(docptr + DOC_HAMMINGPARITY);
+ hamming = readb(docptr + DOC_HAMMINGPARITY); /* 2nd read */
+ writew(hamming, docptr + DOCG4_OOB_6_7);
+ write_nop(docptr);
+
+ /* read the 7 bch bytes from ecc regs */
+ read_hw_ecc(docptr, ecc_buf);
+ ecc_buf[7] = 0; /* clear the "page written" flag */
+ }
+
+ /* write user-supplied bytes to oob */
+ else {
+ writew(nand->oob_poi[7], docptr + DOCG4_OOB_6_7);
+ write_nop(docptr);
+ memcpy(ecc_buf, &nand->oob_poi[8], 8);
+ }
+
+ docg4_write_buf16(mtd, ecc_buf, 8);
+ write_nop(docptr);
+ write_nop(docptr);
+ writew(0, docptr + DOC_DATAEND);
+ write_nop(docptr);
+
+ return 0;
+}
+
+static int docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand,
+ const uint8_t *buf, int oob_required, int page)
+{
+ return write_page(mtd, nand, buf, false);
+}
+
+static int docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand,
+ const uint8_t *buf, int oob_required, int page)
+{
+ return write_page(mtd, nand, buf, true);
+}
+
+static int docg4_write_oob(struct mtd_info *mtd, struct nand_chip *nand,
+ int page)
+{
+ /*
+ * Writing oob-only is not really supported, because MLC nand must write
+ * oob bytes at the same time as page data. Nonetheless, we save the
+ * oob buffer contents here, and then write it along with the page data
+ * if the same page is subsequently written. This allows user space
+ * utilities that write the oob data prior to the page data to work
+ * (e.g., nandwrite). The disdvantage is that, if the intention was to
+ * write oob only, the operation is quietly ignored. Also, oob can get
+ * corrupted if two concurrent processes are running nandwrite.
+ */
+
+ /* note that bytes 7..14 are hw generated hamming/ecc and overwritten */
+ struct docg4_priv *doc = nand->priv;
+ doc->oob_page = page;
+ memcpy(doc->oob_buf, nand->oob_poi, 16);
+ return 0;
+}
+
+static int __init read_factory_bbt(struct mtd_info *mtd)
+{
+ /*
+ * The device contains a read-only factory bad block table. Read it and
+ * update the memory-based bbt accordingly.
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ uint32_t g4_addr = mtd_to_docg4_address(DOCG4_FACTORY_BBT_PAGE, 0);
+ uint8_t *buf;
+ int i, block;
+ __u32 eccfailed_stats = mtd->ecc_stats.failed;
+
+ buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ read_page_prologue(mtd, g4_addr);
+ docg4_read_page(mtd, nand, buf, 0, DOCG4_FACTORY_BBT_PAGE);
+
+ /*
+ * If no memory-based bbt was created, exit. This will happen if module
+ * parameter ignore_badblocks is set. Then why even call this function?
+ * For an unknown reason, block erase always fails if it's the first
+ * operation after device power-up. The above read ensures it never is.
+ * Ugly, I know.
+ */
+ if (nand->bbt == NULL) /* no memory-based bbt */
+ goto exit;
+
+ if (mtd->ecc_stats.failed > eccfailed_stats) {
+ /*
+ * Whoops, an ecc failure ocurred reading the factory bbt.
+ * It is stored redundantly, so we get another chance.
+ */
+ eccfailed_stats = mtd->ecc_stats.failed;
+ docg4_read_page(mtd, nand, buf, 0, DOCG4_REDUNDANT_BBT_PAGE);
+ if (mtd->ecc_stats.failed > eccfailed_stats) {
+ dev_warn(doc->dev,
+ "The factory bbt could not be read!\n");
+ goto exit;
+ }
+ }
+
+ /*
+ * Parse factory bbt and update memory-based bbt. Factory bbt format is
+ * simple: one bit per block, block numbers increase left to right (msb
+ * to lsb). Bit clear means bad block.
+ */
+ for (i = block = 0; block < DOCG4_NUMBLOCKS; block += 8, i++) {
+ int bitnum;
+ unsigned long bits = ~buf[i];
+ for_each_set_bit(bitnum, &bits, 8) {
+ int badblock = block + 7 - bitnum;
+ nand->bbt[badblock / 4] |=
+ 0x03 << ((badblock % 4) * 2);
+ mtd->ecc_stats.badblocks++;
+ dev_notice(doc->dev, "factory-marked bad block: %d\n",
+ badblock);
+ }
+ }
+ exit:
+ kfree(buf);
+ return 0;
+}
+
+static int docg4_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ /*
+ * Mark a block as bad. Bad blocks are marked in the oob area of the
+ * first page of the block. The default scan_bbt() in the nand
+ * infrastructure code works fine for building the memory-based bbt
+ * during initialization, as does the nand infrastructure function that
+ * checks if a block is bad by reading the bbt. This function replaces
+ * the nand default because writes to oob-only are not supported.
+ */
+
+ int ret, i;
+ uint8_t *buf;
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ struct nand_bbt_descr *bbtd = nand->badblock_pattern;
+ int page = (int)(ofs >> nand->page_shift);
+ uint32_t g4_addr = mtd_to_docg4_address(page, 0);
+
+ dev_dbg(doc->dev, "%s: %08llx\n", __func__, ofs);
+
+ if (unlikely(ofs & (DOCG4_BLOCK_SIZE - 1)))
+ dev_warn(doc->dev, "%s: ofs %llx not start of block!\n",
+ __func__, ofs);
+
+ /* allocate blank buffer for page data */
+ buf = kzalloc(DOCG4_PAGE_SIZE, GFP_KERNEL);
+ if (buf == NULL)
+ return -ENOMEM;
+
+ /* write bit-wise negation of pattern to oob buffer */
+ memset(nand->oob_poi, 0xff, mtd->oobsize);
+ for (i = 0; i < bbtd->len; i++)
+ nand->oob_poi[bbtd->offs + i] = ~bbtd->pattern[i];
+
+ /* write first page of block */
+ write_page_prologue(mtd, g4_addr);
+ docg4_write_page(mtd, nand, buf, 1, page);
+ ret = pageprog(mtd);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static int docg4_block_neverbad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ /* only called when module_param ignore_badblocks is set */
+ return 0;
+}
+
+static int docg4_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ /*
+ * Put the device into "deep power-down" mode. Note that CE# must be
+ * deasserted for this to take effect. The xscale, e.g., can be
+ * configured to float this signal when the processor enters power-down,
+ * and a suitable pull-up ensures its deassertion.
+ */
+
+ int i;
+ uint8_t pwr_down;
+ struct docg4_priv *doc = platform_get_drvdata(pdev);
+ void __iomem *docptr = doc->virtadr;
+
+ dev_dbg(doc->dev, "%s...\n", __func__);
+
+ /* poll the register that tells us we're ready to go to sleep */
+ for (i = 0; i < 10; i++) {
+ pwr_down = readb(docptr + DOC_POWERMODE);
+ if (pwr_down & DOC_POWERDOWN_READY)
+ break;
+ usleep_range(1000, 4000);
+ }
+
+ if (pwr_down & DOC_POWERDOWN_READY) {
+ dev_err(doc->dev, "suspend failed; "
+ "timeout polling DOC_POWERDOWN_READY\n");
+ return -EIO;
+ }
+
+ writew(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN,
+ docptr + DOC_ASICMODE);
+ writew(~(DOC_ASICMODE_POWERDOWN | DOC_ASICMODE_MDWREN),
+ docptr + DOC_ASICMODECONFIRM);
+
+ write_nop(docptr);
+
+ return 0;
+}
+
+static int docg4_resume(struct platform_device *pdev)
+{
+
+ /*
+ * Exit power-down. Twelve consecutive reads of the address below
+ * accomplishes this, assuming CE# has been asserted.
+ */
+
+ struct docg4_priv *doc = platform_get_drvdata(pdev);
+ void __iomem *docptr = doc->virtadr;
+ int i;
+
+ dev_dbg(doc->dev, "%s...\n", __func__);
+
+ for (i = 0; i < 12; i++)
+ readb(docptr + 0x1fff);
+
+ return 0;
+}
+
+static void __init init_mtd_structs(struct mtd_info *mtd)
+{
+ /* initialize mtd and nand data structures */
+
+ /*
+ * Note that some of the following initializations are not usually
+ * required within a nand driver because they are performed by the nand
+ * infrastructure code as part of nand_scan(). In this case they need
+ * to be initialized here because we skip call to nand_scan_ident() (the
+ * first half of nand_scan()). The call to nand_scan_ident() is skipped
+ * because for this device the chip id is not read in the manner of a
+ * standard nand device. Unfortunately, nand_scan_ident() does other
+ * things as well, such as call nand_set_defaults().
+ */
+
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+
+ mtd->size = DOCG4_CHIP_SIZE;
+ mtd->name = "Msys_Diskonchip_G4";
+ mtd->writesize = DOCG4_PAGE_SIZE;
+ mtd->erasesize = DOCG4_BLOCK_SIZE;
+ mtd->oobsize = DOCG4_OOB_SIZE;
+ nand->chipsize = DOCG4_CHIP_SIZE;
+ nand->chip_shift = DOCG4_CHIP_SHIFT;
+ nand->bbt_erase_shift = nand->phys_erase_shift = DOCG4_ERASE_SHIFT;
+ nand->chip_delay = 20;
+ nand->page_shift = DOCG4_PAGE_SHIFT;
+ nand->pagemask = 0x3ffff;
+ nand->badblockpos = NAND_LARGE_BADBLOCK_POS;
+ nand->badblockbits = 8;
+ nand->ecc.layout = &docg4_oobinfo;
+ nand->ecc.mode = NAND_ECC_HW_SYNDROME;
+ nand->ecc.size = DOCG4_PAGE_SIZE;
+ nand->ecc.prepad = 8;
+ nand->ecc.bytes = 8;
+ nand->ecc.strength = DOCG4_T;
+ nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE;
+ nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA;
+ nand->controller = &nand->hwcontrol;
+ spin_lock_init(&nand->controller->lock);
+ init_waitqueue_head(&nand->controller->wq);
+
+ /* methods */
+ nand->cmdfunc = docg4_command;
+ nand->waitfunc = docg4_wait;
+ nand->select_chip = docg4_select_chip;
+ nand->read_byte = docg4_read_byte;
+ nand->block_markbad = docg4_block_markbad;
+ nand->read_buf = docg4_read_buf;
+ nand->write_buf = docg4_write_buf16;
+ nand->erase = docg4_erase_block;
+ nand->ecc.read_page = docg4_read_page;
+ nand->ecc.write_page = docg4_write_page;
+ nand->ecc.read_page_raw = docg4_read_page_raw;
+ nand->ecc.write_page_raw = docg4_write_page_raw;
+ nand->ecc.read_oob = docg4_read_oob;
+ nand->ecc.write_oob = docg4_write_oob;
+
+ /*
+ * The way the nand infrastructure code is written, a memory-based bbt
+ * is not created if NAND_SKIP_BBTSCAN is set. With no memory bbt,
+ * nand->block_bad() is used. So when ignoring bad blocks, we skip the
+ * scan and define a dummy block_bad() which always returns 0.
+ */
+ if (ignore_badblocks) {
+ nand->options |= NAND_SKIP_BBTSCAN;
+ nand->block_bad = docg4_block_neverbad;
+ }
+
+}
+
+static int __init read_id_reg(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ void __iomem *docptr = doc->virtadr;
+ uint16_t id1, id2;
+
+ /* check for presence of g4 chip by reading id registers */
+ id1 = readw(docptr + DOC_CHIPID);
+ id1 = readw(docptr + DOCG4_MYSTERY_REG);
+ id2 = readw(docptr + DOC_CHIPID_INV);
+ id2 = readw(docptr + DOCG4_MYSTERY_REG);
+
+ if (id1 == DOCG4_IDREG1_VALUE && id2 == DOCG4_IDREG2_VALUE) {
+ dev_info(doc->dev,
+ "NAND device: 128MiB Diskonchip G4 detected\n");
+ return 0;
+ }
+
+ return -ENODEV;
+}
+
+static char const *part_probes[] = { "cmdlinepart", "saftlpart", NULL };
+
+static int __init probe_docg4(struct platform_device *pdev)
+{
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ void __iomem *virtadr;
+ struct docg4_priv *doc;
+ int len, retval;
+ struct resource *r;
+ struct device *dev = &pdev->dev;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (r == NULL) {
+ dev_err(dev, "no io memory resource defined!\n");
+ return -ENODEV;
+ }
+
+ virtadr = ioremap(r->start, resource_size(r));
+ if (!virtadr) {
+ dev_err(dev, "Diskonchip ioremap failed: %pR\n", r);
+ return -EIO;
+ }
+
+ len = sizeof(struct mtd_info) + sizeof(struct nand_chip) +
+ sizeof(struct docg4_priv);
+ mtd = kzalloc(len, GFP_KERNEL);
+ if (mtd == NULL) {
+ retval = -ENOMEM;
+ goto fail;
+ }
+ nand = (struct nand_chip *) (mtd + 1);
+ doc = (struct docg4_priv *) (nand + 1);
+ mtd->priv = nand;
+ nand->priv = doc;
+ mtd->dev.parent = &pdev->dev;
+ doc->virtadr = virtadr;
+ doc->dev = dev;
+
+ init_mtd_structs(mtd);
+
+ /* initialize kernel bch algorithm */
+ doc->bch = init_bch(DOCG4_M, DOCG4_T, DOCG4_PRIMITIVE_POLY);
+ if (doc->bch == NULL) {
+ retval = -EINVAL;
+ goto fail;
+ }
+
+ platform_set_drvdata(pdev, doc);
+
+ reset(mtd);
+ retval = read_id_reg(mtd);
+ if (retval == -ENODEV) {
+ dev_warn(dev, "No diskonchip G4 device found.\n");
+ goto fail;
+ }
+
+ retval = nand_scan_tail(mtd);
+ if (retval)
+ goto fail;
+
+ retval = read_factory_bbt(mtd);
+ if (retval)
+ goto fail;
+
+ retval = mtd_device_parse_register(mtd, part_probes, NULL, NULL, 0);
+ if (retval)
+ goto fail;
+
+ doc->mtd = mtd;
+ return 0;
+
+ fail:
+ iounmap(virtadr);
+ if (mtd) {
+ /* re-declarations avoid compiler warning */
+ struct nand_chip *nand = mtd->priv;
+ struct docg4_priv *doc = nand->priv;
+ nand_release(mtd); /* deletes partitions and mtd devices */
+ free_bch(doc->bch);
+ kfree(mtd);
+ }
+
+ return retval;
+}
+
+static int __exit cleanup_docg4(struct platform_device *pdev)
+{
+ struct docg4_priv *doc = platform_get_drvdata(pdev);
+ nand_release(doc->mtd);
+ free_bch(doc->bch);
+ kfree(doc->mtd);
+ iounmap(doc->virtadr);
+ return 0;
+}
+
+static struct platform_driver docg4_driver = {
+ .driver = {
+ .name = "docg4",
+ },
+ .suspend = docg4_suspend,
+ .resume = docg4_resume,
+ .remove = __exit_p(cleanup_docg4),
+};
+
+module_platform_driver_probe(docg4_driver, probe_docg4);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mike Dunn");
+MODULE_DESCRIPTION("M-Systems DiskOnChip G4 device driver");
diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c
new file mode 100644
index 0000000..dcb1f7f
--- /dev/null
+++ b/drivers/mtd/nand/fsl_elbc_nand.c
@@ -0,0 +1,964 @@
+/* Freescale Enhanced Local Bus Controller NAND driver
+ *
+ * Copyright © 2006-2007, 2010 Freescale Semiconductor
+ *
+ * Authors: Nick Spence <nick.spence@freescale.com>,
+ * Scott Wood <scottwood@freescale.com>
+ * Jack Lan <jack.lan@freescale.com>
+ * Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/ioport.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <asm/io.h>
+#include <asm/fsl_lbc.h>
+
+#define MAX_BANKS 8
+#define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */
+#define FCM_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait for FCM */
+
+/* mtd information per set */
+
+struct fsl_elbc_mtd {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ struct fsl_lbc_ctrl *ctrl;
+
+ struct device *dev;
+ int bank; /* Chip select bank number */
+ u8 __iomem *vbase; /* Chip select base virtual address */
+ int page_size; /* NAND page size (0=512, 1=2048) */
+ unsigned int fmr; /* FCM Flash Mode Register value */
+};
+
+/* Freescale eLBC FCM controller information */
+
+struct fsl_elbc_fcm_ctrl {
+ struct nand_hw_control controller;
+ struct fsl_elbc_mtd *chips[MAX_BANKS];
+
+ u8 __iomem *addr; /* Address of assigned FCM buffer */
+ unsigned int page; /* Last page written to / read from */
+ unsigned int read_bytes; /* Number of bytes read during command */
+ unsigned int column; /* Saved column from SEQIN */
+ unsigned int index; /* Pointer to next byte to 'read' */
+ unsigned int status; /* status read from LTESR after last op */
+ unsigned int mdr; /* UPM/FCM Data Register value */
+ unsigned int use_mdr; /* Non zero if the MDR is to be set */
+ unsigned int oob; /* Non zero if operating on OOB data */
+ unsigned int counter; /* counter for the initializations */
+ unsigned int max_bitflips; /* Saved during READ0 cmd */
+};
+
+/* These map to the positions used by the FCM hardware ECC generator */
+
+/* Small Page FLASH with FMR[ECCM] = 0 */
+static struct nand_ecclayout fsl_elbc_oob_sp_eccm0 = {
+ .eccbytes = 3,
+ .eccpos = {6, 7, 8},
+ .oobfree = { {0, 5}, {9, 7} },
+};
+
+/* Small Page FLASH with FMR[ECCM] = 1 */
+static struct nand_ecclayout fsl_elbc_oob_sp_eccm1 = {
+ .eccbytes = 3,
+ .eccpos = {8, 9, 10},
+ .oobfree = { {0, 5}, {6, 2}, {11, 5} },
+};
+
+/* Large Page FLASH with FMR[ECCM] = 0 */
+static struct nand_ecclayout fsl_elbc_oob_lp_eccm0 = {
+ .eccbytes = 12,
+ .eccpos = {6, 7, 8, 22, 23, 24, 38, 39, 40, 54, 55, 56},
+ .oobfree = { {1, 5}, {9, 13}, {25, 13}, {41, 13}, {57, 7} },
+};
+
+/* Large Page FLASH with FMR[ECCM] = 1 */
+static struct nand_ecclayout fsl_elbc_oob_lp_eccm1 = {
+ .eccbytes = 12,
+ .eccpos = {8, 9, 10, 24, 25, 26, 40, 41, 42, 56, 57, 58},
+ .oobfree = { {1, 7}, {11, 13}, {27, 13}, {43, 13}, {59, 5} },
+};
+
+/*
+ * ELBC may use HW ECC, so that OOB offsets, that NAND core uses for bbt,
+ * interfere with ECC positions, that's why we implement our own descriptors.
+ * OOB {11, 5}, works for both SP and LP chips, with ECCM = 1 and ECCM = 0.
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 11,
+ .len = 4,
+ .veroffs = 15,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
+};
+
+/*=================================*/
+
+/*
+ * Set up the FCM hardware block and page address fields, and the fcm
+ * structure addr field to point to the correct FCM buffer in memory
+ */
+static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
+ int buf_num;
+
+ elbc_fcm_ctrl->page = page_addr;
+
+ if (priv->page_size) {
+ /*
+ * large page size chip : FPAR[PI] save the lowest 6 bits,
+ * FBAR[BLK] save the other bits.
+ */
+ out_be32(&lbc->fbar, page_addr >> 6);
+ out_be32(&lbc->fpar,
+ ((page_addr << FPAR_LP_PI_SHIFT) & FPAR_LP_PI) |
+ (oob ? FPAR_LP_MS : 0) | column);
+ buf_num = (page_addr & 1) << 2;
+ } else {
+ /*
+ * small page size chip : FPAR[PI] save the lowest 5 bits,
+ * FBAR[BLK] save the other bits.
+ */
+ out_be32(&lbc->fbar, page_addr >> 5);
+ out_be32(&lbc->fpar,
+ ((page_addr << FPAR_SP_PI_SHIFT) & FPAR_SP_PI) |
+ (oob ? FPAR_SP_MS : 0) | column);
+ buf_num = page_addr & 7;
+ }
+
+ elbc_fcm_ctrl->addr = priv->vbase + buf_num * 1024;
+ elbc_fcm_ctrl->index = column;
+
+ /* for OOB data point to the second half of the buffer */
+ if (oob)
+ elbc_fcm_ctrl->index += priv->page_size ? 2048 : 512;
+
+ dev_vdbg(priv->dev, "set_addr: bank=%d, "
+ "elbc_fcm_ctrl->addr=0x%p (0x%p), "
+ "index %x, pes %d ps %d\n",
+ buf_num, elbc_fcm_ctrl->addr, priv->vbase,
+ elbc_fcm_ctrl->index,
+ chip->phys_erase_shift, chip->page_shift);
+}
+
+/*
+ * execute FCM command and wait for it to complete
+ */
+static int fsl_elbc_run_command(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ /* Setup the FMR[OP] to execute without write protection */
+ out_be32(&lbc->fmr, priv->fmr | 3);
+ if (elbc_fcm_ctrl->use_mdr)
+ out_be32(&lbc->mdr, elbc_fcm_ctrl->mdr);
+
+ dev_vdbg(priv->dev,
+ "fsl_elbc_run_command: fmr=%08x fir=%08x fcr=%08x\n",
+ in_be32(&lbc->fmr), in_be32(&lbc->fir), in_be32(&lbc->fcr));
+ dev_vdbg(priv->dev,
+ "fsl_elbc_run_command: fbar=%08x fpar=%08x "
+ "fbcr=%08x bank=%d\n",
+ in_be32(&lbc->fbar), in_be32(&lbc->fpar),
+ in_be32(&lbc->fbcr), priv->bank);
+
+ ctrl->irq_status = 0;
+ /* execute special operation */
+ out_be32(&lbc->lsor, priv->bank);
+
+ /* wait for FCM complete flag or timeout */
+ wait_event_timeout(ctrl->irq_wait, ctrl->irq_status,
+ FCM_TIMEOUT_MSECS * HZ/1000);
+ elbc_fcm_ctrl->status = ctrl->irq_status;
+ /* store mdr value in case it was needed */
+ if (elbc_fcm_ctrl->use_mdr)
+ elbc_fcm_ctrl->mdr = in_be32(&lbc->mdr);
+
+ elbc_fcm_ctrl->use_mdr = 0;
+
+ if (elbc_fcm_ctrl->status != LTESR_CC) {
+ dev_info(priv->dev,
+ "command failed: fir %x fcr %x status %x mdr %x\n",
+ in_be32(&lbc->fir), in_be32(&lbc->fcr),
+ elbc_fcm_ctrl->status, elbc_fcm_ctrl->mdr);
+ return -EIO;
+ }
+
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return 0;
+
+ elbc_fcm_ctrl->max_bitflips = 0;
+
+ if (elbc_fcm_ctrl->read_bytes == mtd->writesize + mtd->oobsize) {
+ uint32_t lteccr = in_be32(&lbc->lteccr);
+ /*
+ * if command was a full page read and the ELBC
+ * has the LTECCR register, then bits 12-15 (ppc order) of
+ * LTECCR indicates which 512 byte sub-pages had fixed errors.
+ * bits 28-31 are uncorrectable errors, marked elsewhere.
+ * for small page nand only 1 bit is used.
+ * if the ELBC doesn't have the lteccr register it reads 0
+ * FIXME: 4 bits can be corrected on NANDs with 2k pages, so
+ * count the number of sub-pages with bitflips and update
+ * ecc_stats.corrected accordingly.
+ */
+ if (lteccr & 0x000F000F)
+ out_be32(&lbc->lteccr, 0x000F000F); /* clear lteccr */
+ if (lteccr & 0x000F0000) {
+ mtd->ecc_stats.corrected++;
+ elbc_fcm_ctrl->max_bitflips = 1;
+ }
+ }
+
+ return 0;
+}
+
+static void fsl_elbc_do_read(struct nand_chip *chip, int oob)
+{
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ if (priv->page_size) {
+ out_be32(&lbc->fir,
+ (FIR_OP_CM0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CA << FIR_OP1_SHIFT) |
+ (FIR_OP_PA << FIR_OP2_SHIFT) |
+ (FIR_OP_CM1 << FIR_OP3_SHIFT) |
+ (FIR_OP_RBW << FIR_OP4_SHIFT));
+
+ out_be32(&lbc->fcr, (NAND_CMD_READ0 << FCR_CMD0_SHIFT) |
+ (NAND_CMD_READSTART << FCR_CMD1_SHIFT));
+ } else {
+ out_be32(&lbc->fir,
+ (FIR_OP_CM0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CA << FIR_OP1_SHIFT) |
+ (FIR_OP_PA << FIR_OP2_SHIFT) |
+ (FIR_OP_RBW << FIR_OP3_SHIFT));
+
+ if (oob)
+ out_be32(&lbc->fcr, NAND_CMD_READOOB << FCR_CMD0_SHIFT);
+ else
+ out_be32(&lbc->fcr, NAND_CMD_READ0 << FCR_CMD0_SHIFT);
+ }
+}
+
+/* cmdfunc send commands to the FCM */
+static void fsl_elbc_cmdfunc(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+
+ elbc_fcm_ctrl->use_mdr = 0;
+
+ /* clear the read buffer */
+ elbc_fcm_ctrl->read_bytes = 0;
+ if (command != NAND_CMD_PAGEPROG)
+ elbc_fcm_ctrl->index = 0;
+
+ switch (command) {
+ /* READ0 and READ1 read the entire buffer to use hardware ECC. */
+ case NAND_CMD_READ1:
+ column += 256;
+
+ /* fall-through */
+ case NAND_CMD_READ0:
+ dev_dbg(priv->dev,
+ "fsl_elbc_cmdfunc: NAND_CMD_READ0, page_addr:"
+ " 0x%x, column: 0x%x.\n", page_addr, column);
+
+
+ out_be32(&lbc->fbcr, 0); /* read entire page to enable ECC */
+ set_addr(mtd, 0, page_addr, 0);
+
+ elbc_fcm_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+ elbc_fcm_ctrl->index += column;
+
+ fsl_elbc_do_read(chip, 0);
+ fsl_elbc_run_command(mtd);
+ return;
+
+ /* READOOB reads only the OOB because no ECC is performed. */
+ case NAND_CMD_READOOB:
+ dev_vdbg(priv->dev,
+ "fsl_elbc_cmdfunc: NAND_CMD_READOOB, page_addr:"
+ " 0x%x, column: 0x%x.\n", page_addr, column);
+
+ out_be32(&lbc->fbcr, mtd->oobsize - column);
+ set_addr(mtd, column, page_addr, 1);
+
+ elbc_fcm_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+
+ fsl_elbc_do_read(chip, 1);
+ fsl_elbc_run_command(mtd);
+ return;
+
+ case NAND_CMD_READID:
+ case NAND_CMD_PARAM:
+ dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD %x\n", command);
+
+ out_be32(&lbc->fir, (FIR_OP_CM0 << FIR_OP0_SHIFT) |
+ (FIR_OP_UA << FIR_OP1_SHIFT) |
+ (FIR_OP_RBW << FIR_OP2_SHIFT));
+ out_be32(&lbc->fcr, command << FCR_CMD0_SHIFT);
+ /*
+ * although currently it's 8 bytes for READID, we always read
+ * the maximum 256 bytes(for PARAM)
+ */
+ out_be32(&lbc->fbcr, 256);
+ elbc_fcm_ctrl->read_bytes = 256;
+ elbc_fcm_ctrl->use_mdr = 1;
+ elbc_fcm_ctrl->mdr = column;
+ set_addr(mtd, 0, 0, 0);
+ fsl_elbc_run_command(mtd);
+ return;
+
+ /* ERASE1 stores the block and page address */
+ case NAND_CMD_ERASE1:
+ dev_vdbg(priv->dev,
+ "fsl_elbc_cmdfunc: NAND_CMD_ERASE1, "
+ "page_addr: 0x%x.\n", page_addr);
+ set_addr(mtd, 0, page_addr, 0);
+ return;
+
+ /* ERASE2 uses the block and page address from ERASE1 */
+ case NAND_CMD_ERASE2:
+ dev_vdbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_ERASE2.\n");
+
+ out_be32(&lbc->fir,
+ (FIR_OP_CM0 << FIR_OP0_SHIFT) |
+ (FIR_OP_PA << FIR_OP1_SHIFT) |
+ (FIR_OP_CM2 << FIR_OP2_SHIFT) |
+ (FIR_OP_CW1 << FIR_OP3_SHIFT) |
+ (FIR_OP_RS << FIR_OP4_SHIFT));
+
+ out_be32(&lbc->fcr,
+ (NAND_CMD_ERASE1 << FCR_CMD0_SHIFT) |
+ (NAND_CMD_STATUS << FCR_CMD1_SHIFT) |
+ (NAND_CMD_ERASE2 << FCR_CMD2_SHIFT));
+
+ out_be32(&lbc->fbcr, 0);
+ elbc_fcm_ctrl->read_bytes = 0;
+ elbc_fcm_ctrl->use_mdr = 1;
+
+ fsl_elbc_run_command(mtd);
+ return;
+
+ /* SEQIN sets up the addr buffer and all registers except the length */
+ case NAND_CMD_SEQIN: {
+ __be32 fcr;
+ dev_vdbg(priv->dev,
+ "fsl_elbc_cmdfunc: NAND_CMD_SEQIN/PAGE_PROG, "
+ "page_addr: 0x%x, column: 0x%x.\n",
+ page_addr, column);
+
+ elbc_fcm_ctrl->column = column;
+ elbc_fcm_ctrl->use_mdr = 1;
+
+ if (column >= mtd->writesize) {
+ /* OOB area */
+ column -= mtd->writesize;
+ elbc_fcm_ctrl->oob = 1;
+ } else {
+ WARN_ON(column != 0);
+ elbc_fcm_ctrl->oob = 0;
+ }
+
+ fcr = (NAND_CMD_STATUS << FCR_CMD1_SHIFT) |
+ (NAND_CMD_SEQIN << FCR_CMD2_SHIFT) |
+ (NAND_CMD_PAGEPROG << FCR_CMD3_SHIFT);
+
+ if (priv->page_size) {
+ out_be32(&lbc->fir,
+ (FIR_OP_CM2 << FIR_OP0_SHIFT) |
+ (FIR_OP_CA << FIR_OP1_SHIFT) |
+ (FIR_OP_PA << FIR_OP2_SHIFT) |
+ (FIR_OP_WB << FIR_OP3_SHIFT) |
+ (FIR_OP_CM3 << FIR_OP4_SHIFT) |
+ (FIR_OP_CW1 << FIR_OP5_SHIFT) |
+ (FIR_OP_RS << FIR_OP6_SHIFT));
+ } else {
+ out_be32(&lbc->fir,
+ (FIR_OP_CM0 << FIR_OP0_SHIFT) |
+ (FIR_OP_CM2 << FIR_OP1_SHIFT) |
+ (FIR_OP_CA << FIR_OP2_SHIFT) |
+ (FIR_OP_PA << FIR_OP3_SHIFT) |
+ (FIR_OP_WB << FIR_OP4_SHIFT) |
+ (FIR_OP_CM3 << FIR_OP5_SHIFT) |
+ (FIR_OP_CW1 << FIR_OP6_SHIFT) |
+ (FIR_OP_RS << FIR_OP7_SHIFT));
+
+ if (elbc_fcm_ctrl->oob)
+ /* OOB area --> READOOB */
+ fcr |= NAND_CMD_READOOB << FCR_CMD0_SHIFT;
+ else
+ /* First 256 bytes --> READ0 */
+ fcr |= NAND_CMD_READ0 << FCR_CMD0_SHIFT;
+ }
+
+ out_be32(&lbc->fcr, fcr);
+ set_addr(mtd, column, page_addr, elbc_fcm_ctrl->oob);
+ return;
+ }
+
+ /* PAGEPROG reuses all of the setup from SEQIN and adds the length */
+ case NAND_CMD_PAGEPROG: {
+ dev_vdbg(priv->dev,
+ "fsl_elbc_cmdfunc: NAND_CMD_PAGEPROG "
+ "writing %d bytes.\n", elbc_fcm_ctrl->index);
+
+ /* if the write did not start at 0 or is not a full page
+ * then set the exact length, otherwise use a full page
+ * write so the HW generates the ECC.
+ */
+ if (elbc_fcm_ctrl->oob || elbc_fcm_ctrl->column != 0 ||
+ elbc_fcm_ctrl->index != mtd->writesize + mtd->oobsize)
+ out_be32(&lbc->fbcr,
+ elbc_fcm_ctrl->index - elbc_fcm_ctrl->column);
+ else
+ out_be32(&lbc->fbcr, 0);
+
+ fsl_elbc_run_command(mtd);
+ return;
+ }
+
+ /* CMD_STATUS must read the status byte while CEB is active */
+ /* Note - it does not wait for the ready line */
+ case NAND_CMD_STATUS:
+ out_be32(&lbc->fir,
+ (FIR_OP_CM0 << FIR_OP0_SHIFT) |
+ (FIR_OP_RBW << FIR_OP1_SHIFT));
+ out_be32(&lbc->fcr, NAND_CMD_STATUS << FCR_CMD0_SHIFT);
+ out_be32(&lbc->fbcr, 1);
+ set_addr(mtd, 0, 0, 0);
+ elbc_fcm_ctrl->read_bytes = 1;
+
+ fsl_elbc_run_command(mtd);
+
+ /* The chip always seems to report that it is
+ * write-protected, even when it is not.
+ */
+ setbits8(elbc_fcm_ctrl->addr, NAND_STATUS_WP);
+ return;
+
+ /* RESET without waiting for the ready line */
+ case NAND_CMD_RESET:
+ dev_dbg(priv->dev, "fsl_elbc_cmdfunc: NAND_CMD_RESET.\n");
+ out_be32(&lbc->fir, FIR_OP_CM0 << FIR_OP0_SHIFT);
+ out_be32(&lbc->fcr, NAND_CMD_RESET << FCR_CMD0_SHIFT);
+ fsl_elbc_run_command(mtd);
+ return;
+
+ default:
+ dev_err(priv->dev,
+ "fsl_elbc_cmdfunc: error, unsupported command 0x%x.\n",
+ command);
+ }
+}
+
+static void fsl_elbc_select_chip(struct mtd_info *mtd, int chip)
+{
+ /* The hardware does not seem to support multiple
+ * chips per bank.
+ */
+}
+
+/*
+ * Write buf to the FCM Controller Data Buffer
+ */
+static void fsl_elbc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
+ unsigned int bufsize = mtd->writesize + mtd->oobsize;
+
+ if (len <= 0) {
+ dev_err(priv->dev, "write_buf of %d bytes", len);
+ elbc_fcm_ctrl->status = 0;
+ return;
+ }
+
+ if ((unsigned int)len > bufsize - elbc_fcm_ctrl->index) {
+ dev_err(priv->dev,
+ "write_buf beyond end of buffer "
+ "(%d requested, %u available)\n",
+ len, bufsize - elbc_fcm_ctrl->index);
+ len = bufsize - elbc_fcm_ctrl->index;
+ }
+
+ memcpy_toio(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], buf, len);
+ /*
+ * This is workaround for the weird elbc hangs during nand write,
+ * Scott Wood says: "...perhaps difference in how long it takes a
+ * write to make it through the localbus compared to a write to IMMR
+ * is causing problems, and sync isn't helping for some reason."
+ * Reading back the last byte helps though.
+ */
+ in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index] + len - 1);
+
+ elbc_fcm_ctrl->index += len;
+}
+
+/*
+ * read a byte from either the FCM hardware buffer if it has any data left
+ * otherwise issue a command to read a single byte.
+ */
+static u8 fsl_elbc_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
+
+ /* If there are still bytes in the FCM, then use the next byte. */
+ if (elbc_fcm_ctrl->index < elbc_fcm_ctrl->read_bytes)
+ return in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index++]);
+
+ dev_err(priv->dev, "read_byte beyond end of buffer\n");
+ return ERR_BYTE;
+}
+
+/*
+ * Read from the FCM Controller Data Buffer
+ */
+static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
+ int avail;
+
+ if (len < 0)
+ return;
+
+ avail = min((unsigned int)len,
+ elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index);
+ memcpy_fromio(buf, &elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index], avail);
+ elbc_fcm_ctrl->index += avail;
+
+ if (len > avail)
+ dev_err(priv->dev,
+ "read_buf beyond end of buffer "
+ "(%d requested, %d available)\n",
+ len, avail);
+}
+
+/* This function is called after Program and Erase Operations to
+ * check for success or failure.
+ */
+static int fsl_elbc_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
+
+ if (elbc_fcm_ctrl->status != LTESR_CC)
+ return NAND_STATUS_FAIL;
+
+ /* The chip always seems to report that it is
+ * write-protected, even when it is not.
+ */
+ return (elbc_fcm_ctrl->mdr & 0xff) | NAND_STATUS_WP;
+}
+
+static int fsl_elbc_chip_init_tail(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ unsigned int al;
+
+ /* calculate FMR Address Length field */
+ al = 0;
+ if (chip->pagemask & 0xffff0000)
+ al++;
+ if (chip->pagemask & 0xff000000)
+ al++;
+
+ priv->fmr |= al << FMR_AL_SHIFT;
+
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->numchips = %d\n",
+ chip->numchips);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->chipsize = %lld\n",
+ chip->chipsize);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->pagemask = %8x\n",
+ chip->pagemask);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_delay = %d\n",
+ chip->chip_delay);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->badblockpos = %d\n",
+ chip->badblockpos);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->chip_shift = %d\n",
+ chip->chip_shift);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->page_shift = %d\n",
+ chip->page_shift);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
+ chip->phys_erase_shift);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
+ chip->ecc.mode);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
+ chip->ecc.steps);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
+ chip->ecc.bytes);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.total = %d\n",
+ chip->ecc.total);
+ dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.layout = %p\n",
+ chip->ecc.layout);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->erasesize = %d\n",
+ mtd->erasesize);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->writesize = %d\n",
+ mtd->writesize);
+ dev_dbg(priv->dev, "fsl_elbc_init: mtd->oobsize = %d\n",
+ mtd->oobsize);
+
+ /* adjust Option Register and ECC to match Flash page size */
+ if (mtd->writesize == 512) {
+ priv->page_size = 0;
+ clrbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
+ } else if (mtd->writesize == 2048) {
+ priv->page_size = 1;
+ setbits32(&lbc->bank[priv->bank].or, OR_FCM_PGS);
+ /* adjust ecc setup if needed */
+ if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
+ BR_DECC_CHK_GEN) {
+ chip->ecc.size = 512;
+ chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
+ &fsl_elbc_oob_lp_eccm1 :
+ &fsl_elbc_oob_lp_eccm0;
+ }
+ } else {
+ dev_err(priv->dev,
+ "fsl_elbc_init: page size %d is not supported\n",
+ mtd->writesize);
+ return -1;
+ }
+
+ return 0;
+}
+
+static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct fsl_elbc_mtd *priv = chip->priv;
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
+
+ fsl_elbc_read_buf(mtd, buf, mtd->writesize);
+ if (oob_required)
+ fsl_elbc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ if (fsl_elbc_wait(mtd, chip) & NAND_STATUS_FAIL)
+ mtd->ecc_stats.failed++;
+
+ return elbc_fcm_ctrl->max_bitflips;
+}
+
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
+{
+ fsl_elbc_write_buf(mtd, buf, mtd->writesize);
+ fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static int fsl_elbc_write_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offset, uint32_t data_len,
+ const uint8_t *buf, int oob_required, int page)
+{
+ fsl_elbc_write_buf(mtd, buf, mtd->writesize);
+ fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv)
+{
+ struct fsl_lbc_ctrl *ctrl = priv->ctrl;
+ struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = ctrl->nand;
+ struct nand_chip *chip = &priv->chip;
+
+ dev_dbg(priv->dev, "eLBC Set Information for bank %d\n", priv->bank);
+
+ /* Fill in fsl_elbc_mtd structure */
+ priv->mtd.priv = chip;
+ priv->mtd.dev.parent = priv->dev;
+
+ /* set timeout to maximum */
+ priv->fmr = 15 << FMR_CWTO_SHIFT;
+ if (in_be32(&lbc->bank[priv->bank].or) & OR_FCM_PGS)
+ priv->fmr |= FMR_ECCM;
+
+ /* fill in nand_chip structure */
+ /* set up function call table */
+ chip->read_byte = fsl_elbc_read_byte;
+ chip->write_buf = fsl_elbc_write_buf;
+ chip->read_buf = fsl_elbc_read_buf;
+ chip->select_chip = fsl_elbc_select_chip;
+ chip->cmdfunc = fsl_elbc_cmdfunc;
+ chip->waitfunc = fsl_elbc_wait;
+
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+
+ /* set up nand options */
+ chip->bbt_options = NAND_BBT_USE_FLASH;
+
+ chip->controller = &elbc_fcm_ctrl->controller;
+ chip->priv = priv;
+
+ chip->ecc.read_page = fsl_elbc_read_page;
+ chip->ecc.write_page = fsl_elbc_write_page;
+ chip->ecc.write_subpage = fsl_elbc_write_subpage;
+
+ /* If CS Base Register selects full hardware ECC then use it */
+ if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
+ BR_DECC_CHK_GEN) {
+ chip->ecc.mode = NAND_ECC_HW;
+ /* put in small page settings and adjust later if needed */
+ chip->ecc.layout = (priv->fmr & FMR_ECCM) ?
+ &fsl_elbc_oob_sp_eccm1 : &fsl_elbc_oob_sp_eccm0;
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
+ } else {
+ /* otherwise fall back to default software ECC */
+ chip->ecc.mode = NAND_ECC_SOFT;
+ }
+
+ return 0;
+}
+
+static int fsl_elbc_chip_remove(struct fsl_elbc_mtd *priv)
+{
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand;
+ nand_release(&priv->mtd);
+
+ kfree(priv->mtd.name);
+
+ if (priv->vbase)
+ iounmap(priv->vbase);
+
+ elbc_fcm_ctrl->chips[priv->bank] = NULL;
+ kfree(priv);
+ return 0;
+}
+
+static DEFINE_MUTEX(fsl_elbc_nand_mutex);
+
+static int fsl_elbc_nand_probe(struct platform_device *pdev)
+{
+ struct fsl_lbc_regs __iomem *lbc;
+ struct fsl_elbc_mtd *priv;
+ struct resource res;
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl;
+ static const char *part_probe_types[]
+ = { "cmdlinepart", "RedBoot", "ofpart", NULL };
+ int ret;
+ int bank;
+ struct device *dev;
+ struct device_node *node = pdev->dev.of_node;
+ struct mtd_part_parser_data ppdata;
+
+ ppdata.of_node = pdev->dev.of_node;
+ if (!fsl_lbc_ctrl_dev || !fsl_lbc_ctrl_dev->regs)
+ return -ENODEV;
+ lbc = fsl_lbc_ctrl_dev->regs;
+ dev = fsl_lbc_ctrl_dev->dev;
+
+ /* get, allocate and map the memory resource */
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret) {
+ dev_err(dev, "failed to get resource\n");
+ return ret;
+ }
+
+ /* find which chip select it is connected to */
+ for (bank = 0; bank < MAX_BANKS; bank++)
+ if ((in_be32(&lbc->bank[bank].br) & BR_V) &&
+ (in_be32(&lbc->bank[bank].br) & BR_MSEL) == BR_MS_FCM &&
+ (in_be32(&lbc->bank[bank].br) &
+ in_be32(&lbc->bank[bank].or) & BR_BA)
+ == fsl_lbc_addr(res.start))
+ break;
+
+ if (bank >= MAX_BANKS) {
+ dev_err(dev, "address did not match any chip selects\n");
+ return -ENODEV;
+ }
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ mutex_lock(&fsl_elbc_nand_mutex);
+ if (!fsl_lbc_ctrl_dev->nand) {
+ elbc_fcm_ctrl = kzalloc(sizeof(*elbc_fcm_ctrl), GFP_KERNEL);
+ if (!elbc_fcm_ctrl) {
+ mutex_unlock(&fsl_elbc_nand_mutex);
+ ret = -ENOMEM;
+ goto err;
+ }
+ elbc_fcm_ctrl->counter++;
+
+ spin_lock_init(&elbc_fcm_ctrl->controller.lock);
+ init_waitqueue_head(&elbc_fcm_ctrl->controller.wq);
+ fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl;
+ } else {
+ elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
+ }
+ mutex_unlock(&fsl_elbc_nand_mutex);
+
+ elbc_fcm_ctrl->chips[bank] = priv;
+ priv->bank = bank;
+ priv->ctrl = fsl_lbc_ctrl_dev;
+ priv->dev = &pdev->dev;
+ dev_set_drvdata(priv->dev, priv);
+
+ priv->vbase = ioremap(res.start, resource_size(&res));
+ if (!priv->vbase) {
+ dev_err(dev, "failed to map chip region\n");
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ priv->mtd.name = kasprintf(GFP_KERNEL, "%llx.flash", (u64)res.start);
+ if (!priv->mtd.name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = fsl_elbc_chip_init(priv);
+ if (ret)
+ goto err;
+
+ ret = nand_scan_ident(&priv->mtd, 1, NULL);
+ if (ret)
+ goto err;
+
+ ret = fsl_elbc_chip_init_tail(&priv->mtd);
+ if (ret)
+ goto err;
+
+ ret = nand_scan_tail(&priv->mtd);
+ if (ret)
+ goto err;
+
+ /* First look for RedBoot table or partitions on the command
+ * line, these take precedence over device tree information */
+ mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata,
+ NULL, 0);
+
+ printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n",
+ (unsigned long long)res.start, priv->bank);
+ return 0;
+
+err:
+ fsl_elbc_chip_remove(priv);
+ return ret;
+}
+
+static int fsl_elbc_nand_remove(struct platform_device *pdev)
+{
+ struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
+ struct fsl_elbc_mtd *priv = dev_get_drvdata(&pdev->dev);
+
+ fsl_elbc_chip_remove(priv);
+
+ mutex_lock(&fsl_elbc_nand_mutex);
+ elbc_fcm_ctrl->counter--;
+ if (!elbc_fcm_ctrl->counter) {
+ fsl_lbc_ctrl_dev->nand = NULL;
+ kfree(elbc_fcm_ctrl);
+ }
+ mutex_unlock(&fsl_elbc_nand_mutex);
+
+ return 0;
+
+}
+
+static const struct of_device_id fsl_elbc_nand_match[] = {
+ { .compatible = "fsl,elbc-fcm-nand", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsl_elbc_nand_match);
+
+static struct platform_driver fsl_elbc_nand_driver = {
+ .driver = {
+ .name = "fsl,elbc-fcm-nand",
+ .of_match_table = fsl_elbc_nand_match,
+ },
+ .probe = fsl_elbc_nand_probe,
+ .remove = fsl_elbc_nand_remove,
+};
+
+module_platform_driver(fsl_elbc_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale");
+MODULE_DESCRIPTION("Freescale Enhanced Local Bus Controller MTD NAND driver");
diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c
new file mode 100644
index 0000000..7f4ac8c
--- /dev/null
+++ b/drivers/mtd/nand/fsl_ifc_nand.c
@@ -0,0 +1,1181 @@
+/*
+ * Freescale Integrated Flash Controller NAND driver
+ *
+ * Copyright 2011-2012 Freescale Semiconductor, Inc
+ *
+ * Author: Dipen Dudhat <Dipen.Dudhat@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/of_address.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/fsl_ifc.h>
+
+#define ERR_BYTE 0xFF /* Value returned for read
+ bytes when read failed */
+#define IFC_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait
+ for IFC NAND Machine */
+
+struct fsl_ifc_ctrl;
+
+/* mtd information per set */
+struct fsl_ifc_mtd {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ struct fsl_ifc_ctrl *ctrl;
+
+ struct device *dev;
+ int bank; /* Chip select bank number */
+ unsigned int bufnum_mask; /* bufnum = page & bufnum_mask */
+ u8 __iomem *vbase; /* Chip select base virtual address */
+};
+
+/* overview of the fsl ifc controller */
+struct fsl_ifc_nand_ctrl {
+ struct nand_hw_control controller;
+ struct fsl_ifc_mtd *chips[FSL_IFC_BANK_COUNT];
+
+ void __iomem *addr; /* Address of assigned IFC buffer */
+ unsigned int page; /* Last page written to / read from */
+ unsigned int read_bytes;/* Number of bytes read during command */
+ unsigned int column; /* Saved column from SEQIN */
+ unsigned int index; /* Pointer to next byte to 'read' */
+ unsigned int oob; /* Non zero if operating on OOB data */
+ unsigned int eccread; /* Non zero for a full-page ECC read */
+ unsigned int counter; /* counter for the initializations */
+ unsigned int max_bitflips; /* Saved during READ0 cmd */
+};
+
+static struct fsl_ifc_nand_ctrl *ifc_nand_ctrl;
+
+/* 512-byte page with 4-bit ECC, 8-bit */
+static struct nand_ecclayout oob_512_8bit_ecc4 = {
+ .eccbytes = 8,
+ .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
+ .oobfree = { {0, 5}, {6, 2} },
+};
+
+/* 512-byte page with 4-bit ECC, 16-bit */
+static struct nand_ecclayout oob_512_16bit_ecc4 = {
+ .eccbytes = 8,
+ .eccpos = {8, 9, 10, 11, 12, 13, 14, 15},
+ .oobfree = { {2, 6}, },
+};
+
+/* 2048-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_2048_ecc4 = {
+ .eccbytes = 32,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ },
+ .oobfree = { {2, 6}, {40, 24} },
+};
+
+/* 4096-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_4096_ecc4 = {
+ .eccbytes = 64,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ },
+ .oobfree = { {2, 6}, {72, 56} },
+};
+
+/* 4096-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_4096_ecc8 = {
+ .eccbytes = 128,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 130, 131, 132, 133, 134, 135,
+ },
+ .oobfree = { {2, 6}, {136, 82} },
+};
+
+/* 8192-byte page size with 4-bit ECC */
+static struct nand_ecclayout oob_8192_ecc4 = {
+ .eccbytes = 128,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 130, 131, 132, 133, 134, 135,
+ },
+ .oobfree = { {2, 6}, {136, 208} },
+};
+
+/* 8192-byte page size with 8-bit ECC -- requires 218-byte OOB */
+static struct nand_ecclayout oob_8192_ecc8 = {
+ .eccbytes = 256,
+ .eccpos = {
+ 8, 9, 10, 11, 12, 13, 14, 15,
+ 16, 17, 18, 19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 64, 65, 66, 67, 68, 69, 70, 71,
+ 72, 73, 74, 75, 76, 77, 78, 79,
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127,
+ 128, 129, 130, 131, 132, 133, 134, 135,
+ 136, 137, 138, 139, 140, 141, 142, 143,
+ 144, 145, 146, 147, 148, 149, 150, 151,
+ 152, 153, 154, 155, 156, 157, 158, 159,
+ 160, 161, 162, 163, 164, 165, 166, 167,
+ 168, 169, 170, 171, 172, 173, 174, 175,
+ 176, 177, 178, 179, 180, 181, 182, 183,
+ 184, 185, 186, 187, 188, 189, 190, 191,
+ 192, 193, 194, 195, 196, 197, 198, 199,
+ 200, 201, 202, 203, 204, 205, 206, 207,
+ 208, 209, 210, 211, 212, 213, 214, 215,
+ 216, 217, 218, 219, 220, 221, 222, 223,
+ 224, 225, 226, 227, 228, 229, 230, 231,
+ 232, 233, 234, 235, 236, 237, 238, 239,
+ 240, 241, 242, 243, 244, 245, 246, 247,
+ 248, 249, 250, 251, 252, 253, 254, 255,
+ 256, 257, 258, 259, 260, 261, 262, 263,
+ },
+ .oobfree = { {2, 6}, {264, 80} },
+};
+
+/*
+ * Generic flash bbt descriptors
+ */
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 2, /* 0 on 8-bit small page */
+ .len = 4,
+ .veroffs = 6,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE |
+ NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 2, /* 0 on 8-bit small page */
+ .len = 4,
+ .veroffs = 6,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
+};
+
+/*
+ * Set up the IFC hardware block and page address fields, and the ifc nand
+ * structure addr field to point to the correct IFC buffer in memory
+ */
+static void set_addr(struct mtd_info *mtd, int column, int page_addr, int oob)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ int buf_num;
+
+ ifc_nand_ctrl->page = page_addr;
+ /* Program ROW0/COL0 */
+ ifc_out32(page_addr, &ifc->ifc_nand.row0);
+ ifc_out32((oob ? IFC_NAND_COL_MS : 0) | column, &ifc->ifc_nand.col0);
+
+ buf_num = page_addr & priv->bufnum_mask;
+
+ ifc_nand_ctrl->addr = priv->vbase + buf_num * (mtd->writesize * 2);
+ ifc_nand_ctrl->index = column;
+
+ /* for OOB data point to the second half of the buffer */
+ if (oob)
+ ifc_nand_ctrl->index += mtd->writesize;
+}
+
+static int is_blank(struct mtd_info *mtd, unsigned int bufnum)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2);
+ u32 __iomem *mainarea = (u32 __iomem *)addr;
+ u8 __iomem *oob = addr + mtd->writesize;
+ int i;
+
+ for (i = 0; i < mtd->writesize / 4; i++) {
+ if (__raw_readl(&mainarea[i]) != 0xffffffff)
+ return 0;
+ }
+
+ for (i = 0; i < chip->ecc.layout->eccbytes; i++) {
+ int pos = chip->ecc.layout->eccpos[i];
+
+ if (__raw_readb(&oob[pos]) != 0xff)
+ return 0;
+ }
+
+ return 1;
+}
+
+/* returns nonzero if entire page is blank */
+static int check_read_ecc(struct mtd_info *mtd, struct fsl_ifc_ctrl *ctrl,
+ u32 *eccstat, unsigned int bufnum)
+{
+ u32 reg = eccstat[bufnum / 4];
+ int errors;
+
+ errors = (reg >> ((3 - bufnum % 4) * 8)) & 15;
+
+ return errors;
+}
+
+/*
+ * execute IFC NAND command and wait for it to complete
+ */
+static void fsl_ifc_run_command(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ u32 eccstat[4];
+ int i;
+
+ /* set the chip select for NAND Transaction */
+ ifc_out32(priv->bank << IFC_NAND_CSEL_SHIFT,
+ &ifc->ifc_nand.nand_csel);
+
+ dev_vdbg(priv->dev,
+ "%s: fir0=%08x fcr0=%08x\n",
+ __func__,
+ ifc_in32(&ifc->ifc_nand.nand_fir0),
+ ifc_in32(&ifc->ifc_nand.nand_fcr0));
+
+ ctrl->nand_stat = 0;
+
+ /* start read/write seq */
+ ifc_out32(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
+
+ /* wait for command complete flag or timeout */
+ wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
+ msecs_to_jiffies(IFC_TIMEOUT_MSECS));
+
+ /* ctrl->nand_stat will be updated from IRQ context */
+ if (!ctrl->nand_stat)
+ dev_err(priv->dev, "Controller is not responding\n");
+ if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_FTOER)
+ dev_err(priv->dev, "NAND Flash Timeout Error\n");
+ if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_WPER)
+ dev_err(priv->dev, "NAND Flash Write Protect Error\n");
+
+ nctrl->max_bitflips = 0;
+
+ if (nctrl->eccread) {
+ int errors;
+ int bufnum = nctrl->page & priv->bufnum_mask;
+ int sector = bufnum * chip->ecc.steps;
+ int sector_end = sector + chip->ecc.steps - 1;
+
+ for (i = sector / 4; i <= sector_end / 4; i++)
+ eccstat[i] = ifc_in32(&ifc->ifc_nand.nand_eccstat[i]);
+
+ for (i = sector; i <= sector_end; i++) {
+ errors = check_read_ecc(mtd, ctrl, eccstat, i);
+
+ if (errors == 15) {
+ /*
+ * Uncorrectable error.
+ * OK only if the whole page is blank.
+ *
+ * We disable ECCER reporting due to...
+ * erratum IFC-A002770 -- so report it now if we
+ * see an uncorrectable error in ECCSTAT.
+ */
+ if (!is_blank(mtd, bufnum))
+ ctrl->nand_stat |=
+ IFC_NAND_EVTER_STAT_ECCER;
+ break;
+ }
+
+ mtd->ecc_stats.corrected += errors;
+ nctrl->max_bitflips = max_t(unsigned int,
+ nctrl->max_bitflips,
+ errors);
+ }
+
+ nctrl->eccread = 0;
+ }
+}
+
+static void fsl_ifc_do_read(struct nand_chip *chip,
+ int oob,
+ struct mtd_info *mtd)
+{
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+
+ /* Program FIR/IFC_NAND_FCR0 for Small/Large page */
+ if (mtd->writesize > 512) {
+ ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP4_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ ifc_out32(0x0, &ifc->ifc_nand.nand_fir1);
+
+ ifc_out32((NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_READSTART << IFC_NAND_FCR0_CMD1_SHIFT),
+ &ifc->ifc_nand.nand_fcr0);
+ } else {
+ ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_RBCD << IFC_NAND_FIR0_OP3_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ ifc_out32(0x0, &ifc->ifc_nand.nand_fir1);
+
+ if (oob)
+ ifc_out32(NAND_CMD_READOOB <<
+ IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ else
+ ifc_out32(NAND_CMD_READ0 <<
+ IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ }
+}
+
+/* cmdfunc send commands to the IFC NAND Machine */
+static void fsl_ifc_cmdfunc(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr) {
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+
+ /* clear the read buffer */
+ ifc_nand_ctrl->read_bytes = 0;
+ if (command != NAND_CMD_PAGEPROG)
+ ifc_nand_ctrl->index = 0;
+
+ switch (command) {
+ /* READ0 read the entire buffer to use hardware ECC. */
+ case NAND_CMD_READ0:
+ ifc_out32(0, &ifc->ifc_nand.nand_fbcr);
+ set_addr(mtd, 0, page_addr, 0);
+
+ ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+ ifc_nand_ctrl->index += column;
+
+ if (chip->ecc.mode == NAND_ECC_HW)
+ ifc_nand_ctrl->eccread = 1;
+
+ fsl_ifc_do_read(chip, 0, mtd);
+ fsl_ifc_run_command(mtd);
+ return;
+
+ /* READOOB reads only the OOB because no ECC is performed. */
+ case NAND_CMD_READOOB:
+ ifc_out32(mtd->oobsize - column, &ifc->ifc_nand.nand_fbcr);
+ set_addr(mtd, column, page_addr, 1);
+
+ ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
+
+ fsl_ifc_do_read(chip, 1, mtd);
+ fsl_ifc_run_command(mtd);
+
+ return;
+
+ case NAND_CMD_READID:
+ case NAND_CMD_PARAM: {
+ int timing = IFC_FIR_OP_RB;
+ if (command == NAND_CMD_PARAM)
+ timing = IFC_FIR_OP_RBCD;
+
+ ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
+ (timing << IFC_NAND_FIR0_OP2_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ ifc_out32(command << IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ ifc_out32(column, &ifc->ifc_nand.row3);
+
+ /*
+ * although currently it's 8 bytes for READID, we always read
+ * the maximum 256 bytes(for PARAM)
+ */
+ ifc_out32(256, &ifc->ifc_nand.nand_fbcr);
+ ifc_nand_ctrl->read_bytes = 256;
+
+ set_addr(mtd, 0, 0, 0);
+ fsl_ifc_run_command(mtd);
+ return;
+ }
+
+ /* ERASE1 stores the block and page address */
+ case NAND_CMD_ERASE1:
+ set_addr(mtd, 0, page_addr, 0);
+ return;
+
+ /* ERASE2 uses the block and page address from ERASE1 */
+ case NAND_CMD_ERASE2:
+ ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR0_OP2_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+
+ ifc_out32((NAND_CMD_ERASE1 << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_ERASE2 << IFC_NAND_FCR0_CMD1_SHIFT),
+ &ifc->ifc_nand.nand_fcr0);
+
+ ifc_out32(0, &ifc->ifc_nand.nand_fbcr);
+ ifc_nand_ctrl->read_bytes = 0;
+ fsl_ifc_run_command(mtd);
+ return;
+
+ /* SEQIN sets up the addr buffer and all registers except the length */
+ case NAND_CMD_SEQIN: {
+ u32 nand_fcr0;
+ ifc_nand_ctrl->column = column;
+ ifc_nand_ctrl->oob = 0;
+
+ if (mtd->writesize > 512) {
+ nand_fcr0 =
+ (NAND_CMD_SEQIN << IFC_NAND_FCR0_CMD0_SHIFT) |
+ (NAND_CMD_STATUS << IFC_NAND_FCR0_CMD1_SHIFT) |
+ (NAND_CMD_PAGEPROG << IFC_NAND_FCR0_CMD2_SHIFT);
+
+ ifc_out32(
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP4_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ ifc_out32(
+ (IFC_FIR_OP_CW1 << IFC_NAND_FIR1_OP5_SHIFT) |
+ (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR1_OP6_SHIFT) |
+ (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP7_SHIFT),
+ &ifc->ifc_nand.nand_fir1);
+ } else {
+ nand_fcr0 = ((NAND_CMD_PAGEPROG <<
+ IFC_NAND_FCR0_CMD1_SHIFT) |
+ (NAND_CMD_SEQIN <<
+ IFC_NAND_FCR0_CMD2_SHIFT) |
+ (NAND_CMD_STATUS <<
+ IFC_NAND_FCR0_CMD3_SHIFT));
+
+ ifc_out32(
+ (IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_CMD2 << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_CA0 << IFC_NAND_FIR0_OP2_SHIFT) |
+ (IFC_FIR_OP_RA0 << IFC_NAND_FIR0_OP3_SHIFT) |
+ (IFC_FIR_OP_WBCD << IFC_NAND_FIR0_OP4_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ ifc_out32(
+ (IFC_FIR_OP_CMD1 << IFC_NAND_FIR1_OP5_SHIFT) |
+ (IFC_FIR_OP_CW3 << IFC_NAND_FIR1_OP6_SHIFT) |
+ (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR1_OP7_SHIFT) |
+ (IFC_FIR_OP_NOP << IFC_NAND_FIR1_OP8_SHIFT),
+ &ifc->ifc_nand.nand_fir1);
+
+ if (column >= mtd->writesize)
+ nand_fcr0 |=
+ NAND_CMD_READOOB << IFC_NAND_FCR0_CMD0_SHIFT;
+ else
+ nand_fcr0 |=
+ NAND_CMD_READ0 << IFC_NAND_FCR0_CMD0_SHIFT;
+ }
+
+ if (column >= mtd->writesize) {
+ /* OOB area --> READOOB */
+ column -= mtd->writesize;
+ ifc_nand_ctrl->oob = 1;
+ }
+ ifc_out32(nand_fcr0, &ifc->ifc_nand.nand_fcr0);
+ set_addr(mtd, column, page_addr, ifc_nand_ctrl->oob);
+ return;
+ }
+
+ /* PAGEPROG reuses all of the setup from SEQIN and adds the length */
+ case NAND_CMD_PAGEPROG: {
+ if (ifc_nand_ctrl->oob) {
+ ifc_out32(ifc_nand_ctrl->index -
+ ifc_nand_ctrl->column,
+ &ifc->ifc_nand.nand_fbcr);
+ } else {
+ ifc_out32(0, &ifc->ifc_nand.nand_fbcr);
+ }
+
+ fsl_ifc_run_command(mtd);
+ return;
+ }
+
+ case NAND_CMD_STATUS: {
+ void __iomem *addr;
+
+ ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP1_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ ifc_out32(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ ifc_out32(1, &ifc->ifc_nand.nand_fbcr);
+ set_addr(mtd, 0, 0, 0);
+ ifc_nand_ctrl->read_bytes = 1;
+
+ fsl_ifc_run_command(mtd);
+
+ /*
+ * The chip always seems to report that it is
+ * write-protected, even when it is not.
+ */
+ addr = ifc_nand_ctrl->addr;
+ if (chip->options & NAND_BUSWIDTH_16)
+ ifc_out16(ifc_in16(addr) | (NAND_STATUS_WP), addr);
+ else
+ ifc_out8(ifc_in8(addr) | (NAND_STATUS_WP), addr);
+ return;
+ }
+
+ case NAND_CMD_RESET:
+ ifc_out32(IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT,
+ &ifc->ifc_nand.nand_fir0);
+ ifc_out32(NAND_CMD_RESET << IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ fsl_ifc_run_command(mtd);
+ return;
+
+ default:
+ dev_err(priv->dev, "%s: error, unsupported command 0x%x.\n",
+ __func__, command);
+ }
+}
+
+static void fsl_ifc_select_chip(struct mtd_info *mtd, int chip)
+{
+ /* The hardware does not seem to support multiple
+ * chips per bank.
+ */
+}
+
+/*
+ * Write buf to the IFC NAND Controller Data Buffer
+ */
+static void fsl_ifc_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ unsigned int bufsize = mtd->writesize + mtd->oobsize;
+
+ if (len <= 0) {
+ dev_err(priv->dev, "%s: len %d bytes", __func__, len);
+ return;
+ }
+
+ if ((unsigned int)len > bufsize - ifc_nand_ctrl->index) {
+ dev_err(priv->dev,
+ "%s: beyond end of buffer (%d requested, %u available)\n",
+ __func__, len, bufsize - ifc_nand_ctrl->index);
+ len = bufsize - ifc_nand_ctrl->index;
+ }
+
+ memcpy_toio(ifc_nand_ctrl->addr + ifc_nand_ctrl->index, buf, len);
+ ifc_nand_ctrl->index += len;
+}
+
+/*
+ * Read a byte from either the IFC hardware buffer
+ * read function for 8-bit buswidth
+ */
+static uint8_t fsl_ifc_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ unsigned int offset;
+
+ /*
+ * If there are still bytes in the IFC buffer, then use the
+ * next byte.
+ */
+ if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) {
+ offset = ifc_nand_ctrl->index++;
+ return ifc_in8(ifc_nand_ctrl->addr + offset);
+ }
+
+ dev_err(priv->dev, "%s: beyond end of buffer\n", __func__);
+ return ERR_BYTE;
+}
+
+/*
+ * Read two bytes from the IFC hardware buffer
+ * read function for 16-bit buswith
+ */
+static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ uint16_t data;
+
+ /*
+ * If there are still bytes in the IFC buffer, then use the
+ * next byte.
+ */
+ if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) {
+ data = ifc_in16(ifc_nand_ctrl->addr + ifc_nand_ctrl->index);
+ ifc_nand_ctrl->index += 2;
+ return (uint8_t) data;
+ }
+
+ dev_err(priv->dev, "%s: beyond end of buffer\n", __func__);
+ return ERR_BYTE;
+}
+
+/*
+ * Read from the IFC Controller Data Buffer
+ */
+static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+ int avail;
+
+ if (len < 0) {
+ dev_err(priv->dev, "%s: len %d bytes", __func__, len);
+ return;
+ }
+
+ avail = min((unsigned int)len,
+ ifc_nand_ctrl->read_bytes - ifc_nand_ctrl->index);
+ memcpy_fromio(buf, ifc_nand_ctrl->addr + ifc_nand_ctrl->index, avail);
+ ifc_nand_ctrl->index += avail;
+
+ if (len > avail)
+ dev_err(priv->dev,
+ "%s: beyond end of buffer (%d requested, %d available)\n",
+ __func__, len, avail);
+}
+
+/*
+ * This function is called after Program and Erase Operations to
+ * check for success or failure.
+ */
+static int fsl_ifc_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ u32 nand_fsr;
+
+ /* Use READ_STATUS command, but wait for the device to be ready */
+ ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_RDSTAT << IFC_NAND_FIR0_OP1_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ ifc_out32(NAND_CMD_STATUS << IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ ifc_out32(1, &ifc->ifc_nand.nand_fbcr);
+ set_addr(mtd, 0, 0, 0);
+ ifc_nand_ctrl->read_bytes = 1;
+
+ fsl_ifc_run_command(mtd);
+
+ nand_fsr = ifc_in32(&ifc->ifc_nand.nand_fsr);
+
+ /*
+ * The chip always seems to report that it is
+ * write-protected, even when it is not.
+ */
+ return nand_fsr | NAND_STATUS_WP;
+}
+
+static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct fsl_ifc_mtd *priv = chip->priv;
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl;
+
+ fsl_ifc_read_buf(mtd, buf, mtd->writesize);
+ if (oob_required)
+ fsl_ifc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ if (ctrl->nand_stat & IFC_NAND_EVTER_STAT_ECCER)
+ dev_err(priv->dev, "NAND Flash ECC Uncorrectable Error\n");
+
+ if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
+ mtd->ecc_stats.failed++;
+
+ return nctrl->max_bitflips;
+}
+
+/* ECC will be calculated automatically, and errors will be detected in
+ * waitfunc.
+ */
+static int fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
+{
+ fsl_ifc_write_buf(mtd, buf, mtd->writesize);
+ fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static int fsl_ifc_chip_init_tail(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_ifc_mtd *priv = chip->priv;
+
+ dev_dbg(priv->dev, "%s: nand->numchips = %d\n", __func__,
+ chip->numchips);
+ dev_dbg(priv->dev, "%s: nand->chipsize = %lld\n", __func__,
+ chip->chipsize);
+ dev_dbg(priv->dev, "%s: nand->pagemask = %8x\n", __func__,
+ chip->pagemask);
+ dev_dbg(priv->dev, "%s: nand->chip_delay = %d\n", __func__,
+ chip->chip_delay);
+ dev_dbg(priv->dev, "%s: nand->badblockpos = %d\n", __func__,
+ chip->badblockpos);
+ dev_dbg(priv->dev, "%s: nand->chip_shift = %d\n", __func__,
+ chip->chip_shift);
+ dev_dbg(priv->dev, "%s: nand->page_shift = %d\n", __func__,
+ chip->page_shift);
+ dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__,
+ chip->phys_erase_shift);
+ dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__,
+ chip->ecc.mode);
+ dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__,
+ chip->ecc.steps);
+ dev_dbg(priv->dev, "%s: nand->ecc.bytes = %d\n", __func__,
+ chip->ecc.bytes);
+ dev_dbg(priv->dev, "%s: nand->ecc.total = %d\n", __func__,
+ chip->ecc.total);
+ dev_dbg(priv->dev, "%s: nand->ecc.layout = %p\n", __func__,
+ chip->ecc.layout);
+ dev_dbg(priv->dev, "%s: mtd->flags = %08x\n", __func__, mtd->flags);
+ dev_dbg(priv->dev, "%s: mtd->size = %lld\n", __func__, mtd->size);
+ dev_dbg(priv->dev, "%s: mtd->erasesize = %d\n", __func__,
+ mtd->erasesize);
+ dev_dbg(priv->dev, "%s: mtd->writesize = %d\n", __func__,
+ mtd->writesize);
+ dev_dbg(priv->dev, "%s: mtd->oobsize = %d\n", __func__,
+ mtd->oobsize);
+
+ return 0;
+}
+
+static void fsl_ifc_sram_init(struct fsl_ifc_mtd *priv)
+{
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ uint32_t csor = 0, csor_8k = 0, csor_ext = 0;
+ uint32_t cs = priv->bank;
+
+ /* Save CSOR and CSOR_ext */
+ csor = ifc_in32(&ifc->csor_cs[cs].csor);
+ csor_ext = ifc_in32(&ifc->csor_cs[cs].csor_ext);
+
+ /* chage PageSize 8K and SpareSize 1K*/
+ csor_8k = (csor & ~(CSOR_NAND_PGS_MASK)) | 0x0018C000;
+ ifc_out32(csor_8k, &ifc->csor_cs[cs].csor);
+ ifc_out32(0x0000400, &ifc->csor_cs[cs].csor_ext);
+
+ /* READID */
+ ifc_out32((IFC_FIR_OP_CW0 << IFC_NAND_FIR0_OP0_SHIFT) |
+ (IFC_FIR_OP_UA << IFC_NAND_FIR0_OP1_SHIFT) |
+ (IFC_FIR_OP_RB << IFC_NAND_FIR0_OP2_SHIFT),
+ &ifc->ifc_nand.nand_fir0);
+ ifc_out32(NAND_CMD_READID << IFC_NAND_FCR0_CMD0_SHIFT,
+ &ifc->ifc_nand.nand_fcr0);
+ ifc_out32(0x0, &ifc->ifc_nand.row3);
+
+ ifc_out32(0x0, &ifc->ifc_nand.nand_fbcr);
+
+ /* Program ROW0/COL0 */
+ ifc_out32(0x0, &ifc->ifc_nand.row0);
+ ifc_out32(0x0, &ifc->ifc_nand.col0);
+
+ /* set the chip select for NAND Transaction */
+ ifc_out32(cs << IFC_NAND_CSEL_SHIFT, &ifc->ifc_nand.nand_csel);
+
+ /* start read seq */
+ ifc_out32(IFC_NAND_SEQ_STRT_FIR_STRT, &ifc->ifc_nand.nandseq_strt);
+
+ /* wait for command complete flag or timeout */
+ wait_event_timeout(ctrl->nand_wait, ctrl->nand_stat,
+ msecs_to_jiffies(IFC_TIMEOUT_MSECS));
+
+ if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC)
+ printk(KERN_ERR "fsl-ifc: Failed to Initialise SRAM\n");
+
+ /* Restore CSOR and CSOR_ext */
+ ifc_out32(csor, &ifc->csor_cs[cs].csor);
+ ifc_out32(csor_ext, &ifc->csor_cs[cs].csor_ext);
+}
+
+static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
+{
+ struct fsl_ifc_ctrl *ctrl = priv->ctrl;
+ struct fsl_ifc_regs __iomem *ifc = ctrl->regs;
+ struct nand_chip *chip = &priv->chip;
+ struct nand_ecclayout *layout;
+ u32 csor;
+
+ /* Fill in fsl_ifc_mtd structure */
+ priv->mtd.priv = chip;
+ priv->mtd.dev.parent = priv->dev;
+
+ /* fill in nand_chip structure */
+ /* set up function call table */
+ if ((ifc_in32(&ifc->cspr_cs[priv->bank].cspr)) & CSPR_PORT_SIZE_16)
+ chip->read_byte = fsl_ifc_read_byte16;
+ else
+ chip->read_byte = fsl_ifc_read_byte;
+
+ chip->write_buf = fsl_ifc_write_buf;
+ chip->read_buf = fsl_ifc_read_buf;
+ chip->select_chip = fsl_ifc_select_chip;
+ chip->cmdfunc = fsl_ifc_cmdfunc;
+ chip->waitfunc = fsl_ifc_wait;
+
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+
+ ifc_out32(0x0, &ifc->ifc_nand.ncfgr);
+
+ /* set up nand options */
+ chip->bbt_options = NAND_BBT_USE_FLASH;
+ chip->options = NAND_NO_SUBPAGE_WRITE;
+
+ if (ifc_in32(&ifc->cspr_cs[priv->bank].cspr) & CSPR_PORT_SIZE_16) {
+ chip->read_byte = fsl_ifc_read_byte16;
+ chip->options |= NAND_BUSWIDTH_16;
+ } else {
+ chip->read_byte = fsl_ifc_read_byte;
+ }
+
+ chip->controller = &ifc_nand_ctrl->controller;
+ chip->priv = priv;
+
+ chip->ecc.read_page = fsl_ifc_read_page;
+ chip->ecc.write_page = fsl_ifc_write_page;
+
+ csor = ifc_in32(&ifc->csor_cs[priv->bank].csor);
+
+ /* Hardware generates ECC per 512 Bytes */
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 8;
+ chip->ecc.strength = 4;
+
+ switch (csor & CSOR_NAND_PGS_MASK) {
+ case CSOR_NAND_PGS_512:
+ if (chip->options & NAND_BUSWIDTH_16) {
+ layout = &oob_512_16bit_ecc4;
+ } else {
+ layout = &oob_512_8bit_ecc4;
+
+ /* Avoid conflict with bad block marker */
+ bbt_main_descr.offs = 0;
+ bbt_mirror_descr.offs = 0;
+ }
+
+ priv->bufnum_mask = 15;
+ break;
+
+ case CSOR_NAND_PGS_2K:
+ layout = &oob_2048_ecc4;
+ priv->bufnum_mask = 3;
+ break;
+
+ case CSOR_NAND_PGS_4K:
+ if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+ CSOR_NAND_ECC_MODE_4) {
+ layout = &oob_4096_ecc4;
+ } else {
+ layout = &oob_4096_ecc8;
+ chip->ecc.bytes = 16;
+ chip->ecc.strength = 8;
+ }
+
+ priv->bufnum_mask = 1;
+ break;
+
+ case CSOR_NAND_PGS_8K:
+ if ((csor & CSOR_NAND_ECC_MODE_MASK) ==
+ CSOR_NAND_ECC_MODE_4) {
+ layout = &oob_8192_ecc4;
+ } else {
+ layout = &oob_8192_ecc8;
+ chip->ecc.bytes = 16;
+ chip->ecc.strength = 8;
+ }
+
+ priv->bufnum_mask = 0;
+ break;
+
+ default:
+ dev_err(priv->dev, "bad csor %#x: bad page size\n", csor);
+ return -ENODEV;
+ }
+
+ /* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
+ if (csor & CSOR_NAND_ECC_DEC_EN) {
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.layout = layout;
+ } else {
+ chip->ecc.mode = NAND_ECC_SOFT;
+ }
+
+ if (ctrl->version == FSL_IFC_VERSION_1_1_0)
+ fsl_ifc_sram_init(priv);
+
+ return 0;
+}
+
+static int fsl_ifc_chip_remove(struct fsl_ifc_mtd *priv)
+{
+ nand_release(&priv->mtd);
+
+ kfree(priv->mtd.name);
+
+ if (priv->vbase)
+ iounmap(priv->vbase);
+
+ ifc_nand_ctrl->chips[priv->bank] = NULL;
+
+ return 0;
+}
+
+static int match_bank(struct fsl_ifc_regs __iomem *ifc, int bank,
+ phys_addr_t addr)
+{
+ u32 cspr = ifc_in32(&ifc->cspr_cs[bank].cspr);
+
+ if (!(cspr & CSPR_V))
+ return 0;
+ if ((cspr & CSPR_MSEL) != CSPR_MSEL_NAND)
+ return 0;
+
+ return (cspr & CSPR_BA) == convert_ifc_address(addr);
+}
+
+static DEFINE_MUTEX(fsl_ifc_nand_mutex);
+
+static int fsl_ifc_nand_probe(struct platform_device *dev)
+{
+ struct fsl_ifc_regs __iomem *ifc;
+ struct fsl_ifc_mtd *priv;
+ struct resource res;
+ static const char *part_probe_types[]
+ = { "cmdlinepart", "RedBoot", "ofpart", NULL };
+ int ret;
+ int bank;
+ struct device_node *node = dev->dev.of_node;
+ struct mtd_part_parser_data ppdata;
+
+ ppdata.of_node = dev->dev.of_node;
+ if (!fsl_ifc_ctrl_dev || !fsl_ifc_ctrl_dev->regs)
+ return -ENODEV;
+ ifc = fsl_ifc_ctrl_dev->regs;
+
+ /* get, allocate and map the memory resource */
+ ret = of_address_to_resource(node, 0, &res);
+ if (ret) {
+ dev_err(&dev->dev, "%s: failed to get resource\n", __func__);
+ return ret;
+ }
+
+ /* find which chip select it is connected to */
+ for (bank = 0; bank < fsl_ifc_ctrl_dev->banks; bank++) {
+ if (match_bank(ifc, bank, res.start))
+ break;
+ }
+
+ if (bank >= fsl_ifc_ctrl_dev->banks) {
+ dev_err(&dev->dev, "%s: address did not match any chip selects\n",
+ __func__);
+ return -ENODEV;
+ }
+
+ priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ mutex_lock(&fsl_ifc_nand_mutex);
+ if (!fsl_ifc_ctrl_dev->nand) {
+ ifc_nand_ctrl = kzalloc(sizeof(*ifc_nand_ctrl), GFP_KERNEL);
+ if (!ifc_nand_ctrl) {
+ mutex_unlock(&fsl_ifc_nand_mutex);
+ return -ENOMEM;
+ }
+
+ ifc_nand_ctrl->read_bytes = 0;
+ ifc_nand_ctrl->index = 0;
+ ifc_nand_ctrl->addr = NULL;
+ fsl_ifc_ctrl_dev->nand = ifc_nand_ctrl;
+
+ spin_lock_init(&ifc_nand_ctrl->controller.lock);
+ init_waitqueue_head(&ifc_nand_ctrl->controller.wq);
+ } else {
+ ifc_nand_ctrl = fsl_ifc_ctrl_dev->nand;
+ }
+ mutex_unlock(&fsl_ifc_nand_mutex);
+
+ ifc_nand_ctrl->chips[bank] = priv;
+ priv->bank = bank;
+ priv->ctrl = fsl_ifc_ctrl_dev;
+ priv->dev = &dev->dev;
+
+ priv->vbase = ioremap(res.start, resource_size(&res));
+ if (!priv->vbase) {
+ dev_err(priv->dev, "%s: failed to map chip region\n", __func__);
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ dev_set_drvdata(priv->dev, priv);
+
+ ifc_out32(IFC_NAND_EVTER_EN_OPC_EN |
+ IFC_NAND_EVTER_EN_FTOER_EN |
+ IFC_NAND_EVTER_EN_WPER_EN,
+ &ifc->ifc_nand.nand_evter_en);
+
+ /* enable NAND Machine Interrupts */
+ ifc_out32(IFC_NAND_EVTER_INTR_OPCIR_EN |
+ IFC_NAND_EVTER_INTR_FTOERIR_EN |
+ IFC_NAND_EVTER_INTR_WPERIR_EN,
+ &ifc->ifc_nand.nand_evter_intr_en);
+ priv->mtd.name = kasprintf(GFP_KERNEL, "%llx.flash", (u64)res.start);
+ if (!priv->mtd.name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = fsl_ifc_chip_init(priv);
+ if (ret)
+ goto err;
+
+ ret = nand_scan_ident(&priv->mtd, 1, NULL);
+ if (ret)
+ goto err;
+
+ ret = fsl_ifc_chip_init_tail(&priv->mtd);
+ if (ret)
+ goto err;
+
+ ret = nand_scan_tail(&priv->mtd);
+ if (ret)
+ goto err;
+
+ /* First look for RedBoot table or partitions on the command
+ * line, these take precedence over device tree information */
+ mtd_device_parse_register(&priv->mtd, part_probe_types, &ppdata,
+ NULL, 0);
+
+ dev_info(priv->dev, "IFC NAND device at 0x%llx, bank %d\n",
+ (unsigned long long)res.start, priv->bank);
+ return 0;
+
+err:
+ fsl_ifc_chip_remove(priv);
+ return ret;
+}
+
+static int fsl_ifc_nand_remove(struct platform_device *dev)
+{
+ struct fsl_ifc_mtd *priv = dev_get_drvdata(&dev->dev);
+
+ fsl_ifc_chip_remove(priv);
+
+ mutex_lock(&fsl_ifc_nand_mutex);
+ ifc_nand_ctrl->counter--;
+ if (!ifc_nand_ctrl->counter) {
+ fsl_ifc_ctrl_dev->nand = NULL;
+ kfree(ifc_nand_ctrl);
+ }
+ mutex_unlock(&fsl_ifc_nand_mutex);
+
+ return 0;
+}
+
+static const struct of_device_id fsl_ifc_nand_match[] = {
+ {
+ .compatible = "fsl,ifc-nand",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsl_ifc_nand_match);
+
+static struct platform_driver fsl_ifc_nand_driver = {
+ .driver = {
+ .name = "fsl,ifc-nand",
+ .of_match_table = fsl_ifc_nand_match,
+ },
+ .probe = fsl_ifc_nand_probe,
+ .remove = fsl_ifc_nand_remove,
+};
+
+module_platform_driver(fsl_ifc_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Freescale");
+MODULE_DESCRIPTION("Freescale Integrated Flash Controller MTD NAND driver");
diff --git a/drivers/mtd/nand/fsl_upm.c b/drivers/mtd/nand/fsl_upm.c
new file mode 100644
index 0000000..d326369
--- /dev/null
+++ b/drivers/mtd/nand/fsl_upm.c
@@ -0,0 +1,361 @@
+/*
+ * Freescale UPM NAND driver.
+ *
+ * Copyright © 2007-2008 MontaVista Software, Inc.
+ *
+ * Author: Anton Vorontsov <avorontsov@ru.mvista.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/mtd.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/of_gpio.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <asm/fsl_lbc.h>
+
+#define FSL_UPM_WAIT_RUN_PATTERN 0x1
+#define FSL_UPM_WAIT_WRITE_BYTE 0x2
+#define FSL_UPM_WAIT_WRITE_BUFFER 0x4
+
+struct fsl_upm_nand {
+ struct device *dev;
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ int last_ctrl;
+ struct mtd_partition *parts;
+ struct fsl_upm upm;
+ uint8_t upm_addr_offset;
+ uint8_t upm_cmd_offset;
+ void __iomem *io_base;
+ int rnb_gpio[NAND_MAX_CHIPS];
+ uint32_t mchip_offsets[NAND_MAX_CHIPS];
+ uint32_t mchip_count;
+ uint32_t mchip_number;
+ int chip_delay;
+ uint32_t wait_flags;
+};
+
+static inline struct fsl_upm_nand *to_fsl_upm_nand(struct mtd_info *mtdinfo)
+{
+ return container_of(mtdinfo, struct fsl_upm_nand, mtd);
+}
+
+static int fun_chip_ready(struct mtd_info *mtd)
+{
+ struct fsl_upm_nand *fun = to_fsl_upm_nand(mtd);
+
+ if (gpio_get_value(fun->rnb_gpio[fun->mchip_number]))
+ return 1;
+
+ dev_vdbg(fun->dev, "busy\n");
+ return 0;
+}
+
+static void fun_wait_rnb(struct fsl_upm_nand *fun)
+{
+ if (fun->rnb_gpio[fun->mchip_number] >= 0) {
+ int cnt = 1000000;
+
+ while (--cnt && !fun_chip_ready(&fun->mtd))
+ cpu_relax();
+ if (!cnt)
+ dev_err(fun->dev, "tired waiting for RNB\n");
+ } else {
+ ndelay(100);
+ }
+}
+
+static void fun_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_upm_nand *fun = to_fsl_upm_nand(mtd);
+ u32 mar;
+
+ if (!(ctrl & fun->last_ctrl)) {
+ fsl_upm_end_pattern(&fun->upm);
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ fun->last_ctrl = ctrl & (NAND_ALE | NAND_CLE);
+ }
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ if (ctrl & NAND_ALE)
+ fsl_upm_start_pattern(&fun->upm, fun->upm_addr_offset);
+ else if (ctrl & NAND_CLE)
+ fsl_upm_start_pattern(&fun->upm, fun->upm_cmd_offset);
+ }
+
+ mar = (cmd << (32 - fun->upm.width)) |
+ fun->mchip_offsets[fun->mchip_number];
+ fsl_upm_run_pattern(&fun->upm, chip->IO_ADDR_R, mar);
+
+ if (fun->wait_flags & FSL_UPM_WAIT_RUN_PATTERN)
+ fun_wait_rnb(fun);
+}
+
+static void fun_select_chip(struct mtd_info *mtd, int mchip_nr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsl_upm_nand *fun = to_fsl_upm_nand(mtd);
+
+ if (mchip_nr == -1) {
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+ } else if (mchip_nr >= 0 && mchip_nr < NAND_MAX_CHIPS) {
+ fun->mchip_number = mchip_nr;
+ chip->IO_ADDR_R = fun->io_base + fun->mchip_offsets[mchip_nr];
+ chip->IO_ADDR_W = chip->IO_ADDR_R;
+ } else {
+ BUG();
+ }
+}
+
+static uint8_t fun_read_byte(struct mtd_info *mtd)
+{
+ struct fsl_upm_nand *fun = to_fsl_upm_nand(mtd);
+
+ return in_8(fun->chip.IO_ADDR_R);
+}
+
+static void fun_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct fsl_upm_nand *fun = to_fsl_upm_nand(mtd);
+ int i;
+
+ for (i = 0; i < len; i++)
+ buf[i] = in_8(fun->chip.IO_ADDR_R);
+}
+
+static void fun_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct fsl_upm_nand *fun = to_fsl_upm_nand(mtd);
+ int i;
+
+ for (i = 0; i < len; i++) {
+ out_8(fun->chip.IO_ADDR_W, buf[i]);
+ if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BYTE)
+ fun_wait_rnb(fun);
+ }
+ if (fun->wait_flags & FSL_UPM_WAIT_WRITE_BUFFER)
+ fun_wait_rnb(fun);
+}
+
+static int fun_chip_init(struct fsl_upm_nand *fun,
+ const struct device_node *upm_np,
+ const struct resource *io_res)
+{
+ int ret;
+ struct device_node *flash_np;
+ struct mtd_part_parser_data ppdata;
+
+ fun->chip.IO_ADDR_R = fun->io_base;
+ fun->chip.IO_ADDR_W = fun->io_base;
+ fun->chip.cmd_ctrl = fun_cmd_ctrl;
+ fun->chip.chip_delay = fun->chip_delay;
+ fun->chip.read_byte = fun_read_byte;
+ fun->chip.read_buf = fun_read_buf;
+ fun->chip.write_buf = fun_write_buf;
+ fun->chip.ecc.mode = NAND_ECC_SOFT;
+ if (fun->mchip_count > 1)
+ fun->chip.select_chip = fun_select_chip;
+
+ if (fun->rnb_gpio[0] >= 0)
+ fun->chip.dev_ready = fun_chip_ready;
+
+ fun->mtd.priv = &fun->chip;
+ fun->mtd.dev.parent = fun->dev;
+
+ flash_np = of_get_next_child(upm_np, NULL);
+ if (!flash_np)
+ return -ENODEV;
+
+ fun->mtd.name = kasprintf(GFP_KERNEL, "0x%llx.%s", (u64)io_res->start,
+ flash_np->name);
+ if (!fun->mtd.name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = nand_scan(&fun->mtd, fun->mchip_count);
+ if (ret)
+ goto err;
+
+ ppdata.of_node = flash_np;
+ ret = mtd_device_parse_register(&fun->mtd, NULL, &ppdata, NULL, 0);
+err:
+ of_node_put(flash_np);
+ if (ret)
+ kfree(fun->mtd.name);
+ return ret;
+}
+
+static int fun_probe(struct platform_device *ofdev)
+{
+ struct fsl_upm_nand *fun;
+ struct resource io_res;
+ const __be32 *prop;
+ int rnb_gpio;
+ int ret;
+ int size;
+ int i;
+
+ fun = kzalloc(sizeof(*fun), GFP_KERNEL);
+ if (!fun)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(ofdev->dev.of_node, 0, &io_res);
+ if (ret) {
+ dev_err(&ofdev->dev, "can't get IO base\n");
+ goto err1;
+ }
+
+ ret = fsl_upm_find(io_res.start, &fun->upm);
+ if (ret) {
+ dev_err(&ofdev->dev, "can't find UPM\n");
+ goto err1;
+ }
+
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-addr-offset",
+ &size);
+ if (!prop || size != sizeof(uint32_t)) {
+ dev_err(&ofdev->dev, "can't get UPM address offset\n");
+ ret = -EINVAL;
+ goto err1;
+ }
+ fun->upm_addr_offset = *prop;
+
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-cmd-offset", &size);
+ if (!prop || size != sizeof(uint32_t)) {
+ dev_err(&ofdev->dev, "can't get UPM command offset\n");
+ ret = -EINVAL;
+ goto err1;
+ }
+ fun->upm_cmd_offset = *prop;
+
+ prop = of_get_property(ofdev->dev.of_node,
+ "fsl,upm-addr-line-cs-offsets", &size);
+ if (prop && (size / sizeof(uint32_t)) > 0) {
+ fun->mchip_count = size / sizeof(uint32_t);
+ if (fun->mchip_count >= NAND_MAX_CHIPS) {
+ dev_err(&ofdev->dev, "too much multiple chips\n");
+ goto err1;
+ }
+ for (i = 0; i < fun->mchip_count; i++)
+ fun->mchip_offsets[i] = be32_to_cpu(prop[i]);
+ } else {
+ fun->mchip_count = 1;
+ }
+
+ for (i = 0; i < fun->mchip_count; i++) {
+ fun->rnb_gpio[i] = -1;
+ rnb_gpio = of_get_gpio(ofdev->dev.of_node, i);
+ if (rnb_gpio >= 0) {
+ ret = gpio_request(rnb_gpio, dev_name(&ofdev->dev));
+ if (ret) {
+ dev_err(&ofdev->dev,
+ "can't request RNB gpio #%d\n", i);
+ goto err2;
+ }
+ gpio_direction_input(rnb_gpio);
+ fun->rnb_gpio[i] = rnb_gpio;
+ } else if (rnb_gpio == -EINVAL) {
+ dev_err(&ofdev->dev, "RNB gpio #%d is invalid\n", i);
+ goto err2;
+ }
+ }
+
+ prop = of_get_property(ofdev->dev.of_node, "chip-delay", NULL);
+ if (prop)
+ fun->chip_delay = be32_to_cpup(prop);
+ else
+ fun->chip_delay = 50;
+
+ prop = of_get_property(ofdev->dev.of_node, "fsl,upm-wait-flags", &size);
+ if (prop && size == sizeof(uint32_t))
+ fun->wait_flags = be32_to_cpup(prop);
+ else
+ fun->wait_flags = FSL_UPM_WAIT_RUN_PATTERN |
+ FSL_UPM_WAIT_WRITE_BYTE;
+
+ fun->io_base = devm_ioremap_nocache(&ofdev->dev, io_res.start,
+ resource_size(&io_res));
+ if (!fun->io_base) {
+ ret = -ENOMEM;
+ goto err2;
+ }
+
+ fun->dev = &ofdev->dev;
+ fun->last_ctrl = NAND_CLE;
+
+ ret = fun_chip_init(fun, ofdev->dev.of_node, &io_res);
+ if (ret)
+ goto err2;
+
+ dev_set_drvdata(&ofdev->dev, fun);
+
+ return 0;
+err2:
+ for (i = 0; i < fun->mchip_count; i++) {
+ if (fun->rnb_gpio[i] < 0)
+ break;
+ gpio_free(fun->rnb_gpio[i]);
+ }
+err1:
+ kfree(fun);
+
+ return ret;
+}
+
+static int fun_remove(struct platform_device *ofdev)
+{
+ struct fsl_upm_nand *fun = dev_get_drvdata(&ofdev->dev);
+ int i;
+
+ nand_release(&fun->mtd);
+ kfree(fun->mtd.name);
+
+ for (i = 0; i < fun->mchip_count; i++) {
+ if (fun->rnb_gpio[i] < 0)
+ break;
+ gpio_free(fun->rnb_gpio[i]);
+ }
+
+ kfree(fun);
+
+ return 0;
+}
+
+static const struct of_device_id of_fun_match[] = {
+ { .compatible = "fsl,upm-nand" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_fun_match);
+
+static struct platform_driver of_fun_driver = {
+ .driver = {
+ .name = "fsl,upm-nand",
+ .of_match_table = of_fun_match,
+ },
+ .probe = fun_probe,
+ .remove = fun_remove,
+};
+
+module_platform_driver(of_fun_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
+MODULE_DESCRIPTION("Driver for NAND chips working through Freescale "
+ "LocalBus User-Programmable Machine");
diff --git a/drivers/mtd/nand/fsmc_nand.c b/drivers/mtd/nand/fsmc_nand.c
new file mode 100644
index 0000000..07af3dc
--- /dev/null
+++ b/drivers/mtd/nand/fsmc_nand.c
@@ -0,0 +1,1269 @@
+/*
+ * drivers/mtd/nand/fsmc_nand.c
+ *
+ * ST Microelectronics
+ * Flexible Static Memory Controller (FSMC)
+ * Driver for NAND portions
+ *
+ * Copyright © 2010 ST Microelectronics
+ * Vipin Kumar <vipin.kumar@st.com>
+ * Ashish Priyadarshi
+ *
+ * Based on drivers/mtd/nand/nomadik_nand.c
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/resource.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/mtd/fsmc.h>
+#include <linux/amba/bus.h>
+#include <mtd/mtd-abi.h>
+
+static struct nand_ecclayout fsmc_ecc1_128_layout = {
+ .eccbytes = 24,
+ .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52,
+ 66, 67, 68, 82, 83, 84, 98, 99, 100, 114, 115, 116},
+ .oobfree = {
+ {.offset = 8, .length = 8},
+ {.offset = 24, .length = 8},
+ {.offset = 40, .length = 8},
+ {.offset = 56, .length = 8},
+ {.offset = 72, .length = 8},
+ {.offset = 88, .length = 8},
+ {.offset = 104, .length = 8},
+ {.offset = 120, .length = 8}
+ }
+};
+
+static struct nand_ecclayout fsmc_ecc1_64_layout = {
+ .eccbytes = 12,
+ .eccpos = {2, 3, 4, 18, 19, 20, 34, 35, 36, 50, 51, 52},
+ .oobfree = {
+ {.offset = 8, .length = 8},
+ {.offset = 24, .length = 8},
+ {.offset = 40, .length = 8},
+ {.offset = 56, .length = 8},
+ }
+};
+
+static struct nand_ecclayout fsmc_ecc1_16_layout = {
+ .eccbytes = 3,
+ .eccpos = {2, 3, 4},
+ .oobfree = {
+ {.offset = 8, .length = 8},
+ }
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 8192 bytes & OOBsize 256 bytes. 13*16 bytes
+ * of OB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 46
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_256_layout = {
+ .eccbytes = 208,
+ .eccpos = { 2, 3, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14,
+ 18, 19, 20, 21, 22, 23, 24,
+ 25, 26, 27, 28, 29, 30,
+ 34, 35, 36, 37, 38, 39, 40,
+ 41, 42, 43, 44, 45, 46,
+ 50, 51, 52, 53, 54, 55, 56,
+ 57, 58, 59, 60, 61, 62,
+ 66, 67, 68, 69, 70, 71, 72,
+ 73, 74, 75, 76, 77, 78,
+ 82, 83, 84, 85, 86, 87, 88,
+ 89, 90, 91, 92, 93, 94,
+ 98, 99, 100, 101, 102, 103, 104,
+ 105, 106, 107, 108, 109, 110,
+ 114, 115, 116, 117, 118, 119, 120,
+ 121, 122, 123, 124, 125, 126,
+ 130, 131, 132, 133, 134, 135, 136,
+ 137, 138, 139, 140, 141, 142,
+ 146, 147, 148, 149, 150, 151, 152,
+ 153, 154, 155, 156, 157, 158,
+ 162, 163, 164, 165, 166, 167, 168,
+ 169, 170, 171, 172, 173, 174,
+ 178, 179, 180, 181, 182, 183, 184,
+ 185, 186, 187, 188, 189, 190,
+ 194, 195, 196, 197, 198, 199, 200,
+ 201, 202, 203, 204, 205, 206,
+ 210, 211, 212, 213, 214, 215, 216,
+ 217, 218, 219, 220, 221, 222,
+ 226, 227, 228, 229, 230, 231, 232,
+ 233, 234, 235, 236, 237, 238,
+ 242, 243, 244, 245, 246, 247, 248,
+ 249, 250, 251, 252, 253, 254
+ },
+ .oobfree = {
+ {.offset = 15, .length = 3},
+ {.offset = 31, .length = 3},
+ {.offset = 47, .length = 3},
+ {.offset = 63, .length = 3},
+ {.offset = 79, .length = 3},
+ {.offset = 95, .length = 3},
+ {.offset = 111, .length = 3},
+ {.offset = 127, .length = 3},
+ {.offset = 143, .length = 3},
+ {.offset = 159, .length = 3},
+ {.offset = 175, .length = 3},
+ {.offset = 191, .length = 3},
+ {.offset = 207, .length = 3},
+ {.offset = 223, .length = 3},
+ {.offset = 239, .length = 3},
+ {.offset = 255, .length = 1}
+ }
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 224 bytes. 13*8 bytes
+ * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 118
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_224_layout = {
+ .eccbytes = 104,
+ .eccpos = { 2, 3, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14,
+ 18, 19, 20, 21, 22, 23, 24,
+ 25, 26, 27, 28, 29, 30,
+ 34, 35, 36, 37, 38, 39, 40,
+ 41, 42, 43, 44, 45, 46,
+ 50, 51, 52, 53, 54, 55, 56,
+ 57, 58, 59, 60, 61, 62,
+ 66, 67, 68, 69, 70, 71, 72,
+ 73, 74, 75, 76, 77, 78,
+ 82, 83, 84, 85, 86, 87, 88,
+ 89, 90, 91, 92, 93, 94,
+ 98, 99, 100, 101, 102, 103, 104,
+ 105, 106, 107, 108, 109, 110,
+ 114, 115, 116, 117, 118, 119, 120,
+ 121, 122, 123, 124, 125, 126
+ },
+ .oobfree = {
+ {.offset = 15, .length = 3},
+ {.offset = 31, .length = 3},
+ {.offset = 47, .length = 3},
+ {.offset = 63, .length = 3},
+ {.offset = 79, .length = 3},
+ {.offset = 95, .length = 3},
+ {.offset = 111, .length = 3},
+ {.offset = 127, .length = 97}
+ }
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 4096 bytes & OOBsize 128 bytes. 13*8 bytes
+ * of OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block & 22
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_128_layout = {
+ .eccbytes = 104,
+ .eccpos = { 2, 3, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14,
+ 18, 19, 20, 21, 22, 23, 24,
+ 25, 26, 27, 28, 29, 30,
+ 34, 35, 36, 37, 38, 39, 40,
+ 41, 42, 43, 44, 45, 46,
+ 50, 51, 52, 53, 54, 55, 56,
+ 57, 58, 59, 60, 61, 62,
+ 66, 67, 68, 69, 70, 71, 72,
+ 73, 74, 75, 76, 77, 78,
+ 82, 83, 84, 85, 86, 87, 88,
+ 89, 90, 91, 92, 93, 94,
+ 98, 99, 100, 101, 102, 103, 104,
+ 105, 106, 107, 108, 109, 110,
+ 114, 115, 116, 117, 118, 119, 120,
+ 121, 122, 123, 124, 125, 126
+ },
+ .oobfree = {
+ {.offset = 15, .length = 3},
+ {.offset = 31, .length = 3},
+ {.offset = 47, .length = 3},
+ {.offset = 63, .length = 3},
+ {.offset = 79, .length = 3},
+ {.offset = 95, .length = 3},
+ {.offset = 111, .length = 3},
+ {.offset = 127, .length = 1}
+ }
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 2048 bytes & OOBsize 64 bytes. 13*4 bytes of
+ * OOB size is reserved for ECC, Byte no. 0 & 1 reserved for bad block and 10
+ * bytes are free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_64_layout = {
+ .eccbytes = 52,
+ .eccpos = { 2, 3, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14,
+ 18, 19, 20, 21, 22, 23, 24,
+ 25, 26, 27, 28, 29, 30,
+ 34, 35, 36, 37, 38, 39, 40,
+ 41, 42, 43, 44, 45, 46,
+ 50, 51, 52, 53, 54, 55, 56,
+ 57, 58, 59, 60, 61, 62,
+ },
+ .oobfree = {
+ {.offset = 15, .length = 3},
+ {.offset = 31, .length = 3},
+ {.offset = 47, .length = 3},
+ {.offset = 63, .length = 1},
+ }
+};
+
+/*
+ * ECC4 layout for NAND of pagesize 512 bytes & OOBsize 16 bytes. 13 bytes of
+ * OOB size is reserved for ECC, Byte no. 4 & 5 reserved for bad block and One
+ * byte is free for use.
+ */
+static struct nand_ecclayout fsmc_ecc4_16_layout = {
+ .eccbytes = 13,
+ .eccpos = { 0, 1, 2, 3, 6, 7, 8,
+ 9, 10, 11, 12, 13, 14
+ },
+ .oobfree = {
+ {.offset = 15, .length = 1},
+ }
+};
+
+/*
+ * ECC placement definitions in oobfree type format.
+ * There are 13 bytes of ecc for every 512 byte block and it has to be read
+ * consecutively and immediately after the 512 byte data block for hardware to
+ * generate the error bit offsets in 512 byte data.
+ * Managing the ecc bytes in the following way makes it easier for software to
+ * read ecc bytes consecutive to data bytes. This way is similar to
+ * oobfree structure maintained already in generic nand driver
+ */
+static struct fsmc_eccplace fsmc_ecc4_lp_place = {
+ .eccplace = {
+ {.offset = 2, .length = 13},
+ {.offset = 18, .length = 13},
+ {.offset = 34, .length = 13},
+ {.offset = 50, .length = 13},
+ {.offset = 66, .length = 13},
+ {.offset = 82, .length = 13},
+ {.offset = 98, .length = 13},
+ {.offset = 114, .length = 13}
+ }
+};
+
+static struct fsmc_eccplace fsmc_ecc4_sp_place = {
+ .eccplace = {
+ {.offset = 0, .length = 4},
+ {.offset = 6, .length = 9}
+ }
+};
+
+/**
+ * struct fsmc_nand_data - structure for FSMC NAND device state
+ *
+ * @pid: Part ID on the AMBA PrimeCell format
+ * @mtd: MTD info for a NAND flash.
+ * @nand: Chip related info for a NAND flash.
+ * @partitions: Partition info for a NAND Flash.
+ * @nr_partitions: Total number of partition of a NAND flash.
+ *
+ * @ecc_place: ECC placing locations in oobfree type format.
+ * @bank: Bank number for probed device.
+ * @clk: Clock structure for FSMC.
+ *
+ * @read_dma_chan: DMA channel for read access
+ * @write_dma_chan: DMA channel for write access to NAND
+ * @dma_access_complete: Completion structure
+ *
+ * @data_pa: NAND Physical port for Data.
+ * @data_va: NAND port for Data.
+ * @cmd_va: NAND port for Command.
+ * @addr_va: NAND port for Address.
+ * @regs_va: FSMC regs base address.
+ */
+struct fsmc_nand_data {
+ u32 pid;
+ struct mtd_info mtd;
+ struct nand_chip nand;
+ struct mtd_partition *partitions;
+ unsigned int nr_partitions;
+
+ struct fsmc_eccplace *ecc_place;
+ unsigned int bank;
+ struct device *dev;
+ enum access_mode mode;
+ struct clk *clk;
+
+ /* DMA related objects */
+ struct dma_chan *read_dma_chan;
+ struct dma_chan *write_dma_chan;
+ struct completion dma_access_complete;
+
+ struct fsmc_nand_timings *dev_timings;
+
+ dma_addr_t data_pa;
+ void __iomem *data_va;
+ void __iomem *cmd_va;
+ void __iomem *addr_va;
+ void __iomem *regs_va;
+
+ void (*select_chip)(uint32_t bank, uint32_t busw);
+};
+
+/* Assert CS signal based on chipnr */
+static void fsmc_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct fsmc_nand_data *host;
+
+ host = container_of(mtd, struct fsmc_nand_data, mtd);
+
+ switch (chipnr) {
+ case -1:
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+ break;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ if (host->select_chip)
+ host->select_chip(chipnr,
+ chip->options & NAND_BUSWIDTH_16);
+ break;
+
+ default:
+ dev_err(host->dev, "unsupported chip-select %d\n", chipnr);
+ }
+}
+
+/*
+ * fsmc_cmd_ctrl - For facilitaing Hardware access
+ * This routine allows hardware specific access to control-lines(ALE,CLE)
+ */
+static void fsmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ void __iomem *regs = host->regs_va;
+ unsigned int bank = host->bank;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ u32 pc;
+
+ if (ctrl & NAND_CLE) {
+ this->IO_ADDR_R = host->cmd_va;
+ this->IO_ADDR_W = host->cmd_va;
+ } else if (ctrl & NAND_ALE) {
+ this->IO_ADDR_R = host->addr_va;
+ this->IO_ADDR_W = host->addr_va;
+ } else {
+ this->IO_ADDR_R = host->data_va;
+ this->IO_ADDR_W = host->data_va;
+ }
+
+ pc = readl(FSMC_NAND_REG(regs, bank, PC));
+ if (ctrl & NAND_NCE)
+ pc |= FSMC_ENABLE;
+ else
+ pc &= ~FSMC_ENABLE;
+ writel_relaxed(pc, FSMC_NAND_REG(regs, bank, PC));
+ }
+
+ mb();
+
+ if (cmd != NAND_CMD_NONE)
+ writeb_relaxed(cmd, this->IO_ADDR_W);
+}
+
+/*
+ * fsmc_nand_setup - FSMC (Flexible Static Memory Controller) init routine
+ *
+ * This routine initializes timing parameters related to NAND memory access in
+ * FSMC registers
+ */
+static void fsmc_nand_setup(void __iomem *regs, uint32_t bank,
+ uint32_t busw, struct fsmc_nand_timings *timings)
+{
+ uint32_t value = FSMC_DEVTYPE_NAND | FSMC_ENABLE | FSMC_WAITON;
+ uint32_t tclr, tar, thiz, thold, twait, tset;
+ struct fsmc_nand_timings *tims;
+ struct fsmc_nand_timings default_timings = {
+ .tclr = FSMC_TCLR_1,
+ .tar = FSMC_TAR_1,
+ .thiz = FSMC_THIZ_1,
+ .thold = FSMC_THOLD_4,
+ .twait = FSMC_TWAIT_6,
+ .tset = FSMC_TSET_0,
+ };
+
+ if (timings)
+ tims = timings;
+ else
+ tims = &default_timings;
+
+ tclr = (tims->tclr & FSMC_TCLR_MASK) << FSMC_TCLR_SHIFT;
+ tar = (tims->tar & FSMC_TAR_MASK) << FSMC_TAR_SHIFT;
+ thiz = (tims->thiz & FSMC_THIZ_MASK) << FSMC_THIZ_SHIFT;
+ thold = (tims->thold & FSMC_THOLD_MASK) << FSMC_THOLD_SHIFT;
+ twait = (tims->twait & FSMC_TWAIT_MASK) << FSMC_TWAIT_SHIFT;
+ tset = (tims->tset & FSMC_TSET_MASK) << FSMC_TSET_SHIFT;
+
+ if (busw)
+ writel_relaxed(value | FSMC_DEVWID_16,
+ FSMC_NAND_REG(regs, bank, PC));
+ else
+ writel_relaxed(value | FSMC_DEVWID_8,
+ FSMC_NAND_REG(regs, bank, PC));
+
+ writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | tclr | tar,
+ FSMC_NAND_REG(regs, bank, PC));
+ writel_relaxed(thiz | thold | twait | tset,
+ FSMC_NAND_REG(regs, bank, COMM));
+ writel_relaxed(thiz | thold | twait | tset,
+ FSMC_NAND_REG(regs, bank, ATTRIB));
+}
+
+/*
+ * fsmc_enable_hwecc - Enables Hardware ECC through FSMC registers
+ */
+static void fsmc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ void __iomem *regs = host->regs_va;
+ uint32_t bank = host->bank;
+
+ writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCPLEN_256,
+ FSMC_NAND_REG(regs, bank, PC));
+ writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) & ~FSMC_ECCEN,
+ FSMC_NAND_REG(regs, bank, PC));
+ writel_relaxed(readl(FSMC_NAND_REG(regs, bank, PC)) | FSMC_ECCEN,
+ FSMC_NAND_REG(regs, bank, PC));
+}
+
+/*
+ * fsmc_read_hwecc_ecc4 - Hardware ECC calculator for ecc4 option supported by
+ * FSMC. ECC is 13 bytes for 512 bytes of data (supports error correction up to
+ * max of 8-bits)
+ */
+static int fsmc_read_hwecc_ecc4(struct mtd_info *mtd, const uint8_t *data,
+ uint8_t *ecc)
+{
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ void __iomem *regs = host->regs_va;
+ uint32_t bank = host->bank;
+ uint32_t ecc_tmp;
+ unsigned long deadline = jiffies + FSMC_BUSY_WAIT_TIMEOUT;
+
+ do {
+ if (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) & FSMC_CODE_RDY)
+ break;
+ else
+ cond_resched();
+ } while (!time_after_eq(jiffies, deadline));
+
+ if (time_after_eq(jiffies, deadline)) {
+ dev_err(host->dev, "calculate ecc timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
+ ecc[0] = (uint8_t) (ecc_tmp >> 0);
+ ecc[1] = (uint8_t) (ecc_tmp >> 8);
+ ecc[2] = (uint8_t) (ecc_tmp >> 16);
+ ecc[3] = (uint8_t) (ecc_tmp >> 24);
+
+ ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
+ ecc[4] = (uint8_t) (ecc_tmp >> 0);
+ ecc[5] = (uint8_t) (ecc_tmp >> 8);
+ ecc[6] = (uint8_t) (ecc_tmp >> 16);
+ ecc[7] = (uint8_t) (ecc_tmp >> 24);
+
+ ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
+ ecc[8] = (uint8_t) (ecc_tmp >> 0);
+ ecc[9] = (uint8_t) (ecc_tmp >> 8);
+ ecc[10] = (uint8_t) (ecc_tmp >> 16);
+ ecc[11] = (uint8_t) (ecc_tmp >> 24);
+
+ ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
+ ecc[12] = (uint8_t) (ecc_tmp >> 16);
+
+ return 0;
+}
+
+/*
+ * fsmc_read_hwecc_ecc1 - Hardware ECC calculator for ecc1 option supported by
+ * FSMC. ECC is 3 bytes for 512 bytes of data (supports error correction up to
+ * max of 1-bit)
+ */
+static int fsmc_read_hwecc_ecc1(struct mtd_info *mtd, const uint8_t *data,
+ uint8_t *ecc)
+{
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ void __iomem *regs = host->regs_va;
+ uint32_t bank = host->bank;
+ uint32_t ecc_tmp;
+
+ ecc_tmp = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
+ ecc[0] = (uint8_t) (ecc_tmp >> 0);
+ ecc[1] = (uint8_t) (ecc_tmp >> 8);
+ ecc[2] = (uint8_t) (ecc_tmp >> 16);
+
+ return 0;
+}
+
+/* Count the number of 0's in buff upto a max of max_bits */
+static int count_written_bits(uint8_t *buff, int size, int max_bits)
+{
+ int k, written_bits = 0;
+
+ for (k = 0; k < size; k++) {
+ written_bits += hweight8(~buff[k]);
+ if (written_bits > max_bits)
+ break;
+ }
+
+ return written_bits;
+}
+
+static void dma_complete(void *param)
+{
+ struct fsmc_nand_data *host = param;
+
+ complete(&host->dma_access_complete);
+}
+
+static int dma_xfer(struct fsmc_nand_data *host, void *buffer, int len,
+ enum dma_data_direction direction)
+{
+ struct dma_chan *chan;
+ struct dma_device *dma_dev;
+ struct dma_async_tx_descriptor *tx;
+ dma_addr_t dma_dst, dma_src, dma_addr;
+ dma_cookie_t cookie;
+ unsigned long flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+ int ret;
+ unsigned long time_left;
+
+ if (direction == DMA_TO_DEVICE)
+ chan = host->write_dma_chan;
+ else if (direction == DMA_FROM_DEVICE)
+ chan = host->read_dma_chan;
+ else
+ return -EINVAL;
+
+ dma_dev = chan->device;
+ dma_addr = dma_map_single(dma_dev->dev, buffer, len, direction);
+
+ if (direction == DMA_TO_DEVICE) {
+ dma_src = dma_addr;
+ dma_dst = host->data_pa;
+ } else {
+ dma_src = host->data_pa;
+ dma_dst = dma_addr;
+ }
+
+ tx = dma_dev->device_prep_dma_memcpy(chan, dma_dst, dma_src,
+ len, flags);
+ if (!tx) {
+ dev_err(host->dev, "device_prep_dma_memcpy error\n");
+ ret = -EIO;
+ goto unmap_dma;
+ }
+
+ tx->callback = dma_complete;
+ tx->callback_param = host;
+ cookie = tx->tx_submit(tx);
+
+ ret = dma_submit_error(cookie);
+ if (ret) {
+ dev_err(host->dev, "dma_submit_error %d\n", cookie);
+ goto unmap_dma;
+ }
+
+ dma_async_issue_pending(chan);
+
+ time_left =
+ wait_for_completion_timeout(&host->dma_access_complete,
+ msecs_to_jiffies(3000));
+ if (time_left == 0) {
+ dmaengine_terminate_all(chan);
+ dev_err(host->dev, "wait_for_completion_timeout\n");
+ ret = -ETIMEDOUT;
+ goto unmap_dma;
+ }
+
+ ret = 0;
+
+unmap_dma:
+ dma_unmap_single(dma_dev->dev, dma_addr, len, direction);
+
+ return ret;
+}
+
+/*
+ * fsmc_write_buf - write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void fsmc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
+ IS_ALIGNED(len, sizeof(uint32_t))) {
+ uint32_t *p = (uint32_t *)buf;
+ len = len >> 2;
+ for (i = 0; i < len; i++)
+ writel_relaxed(p[i], chip->IO_ADDR_W);
+ } else {
+ for (i = 0; i < len; i++)
+ writeb_relaxed(buf[i], chip->IO_ADDR_W);
+ }
+}
+
+/*
+ * fsmc_read_buf - read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void fsmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+
+ if (IS_ALIGNED((uint32_t)buf, sizeof(uint32_t)) &&
+ IS_ALIGNED(len, sizeof(uint32_t))) {
+ uint32_t *p = (uint32_t *)buf;
+ len = len >> 2;
+ for (i = 0; i < len; i++)
+ p[i] = readl_relaxed(chip->IO_ADDR_R);
+ } else {
+ for (i = 0; i < len; i++)
+ buf[i] = readb_relaxed(chip->IO_ADDR_R);
+ }
+}
+
+/*
+ * fsmc_read_buf_dma - read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void fsmc_read_buf_dma(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct fsmc_nand_data *host;
+
+ host = container_of(mtd, struct fsmc_nand_data, mtd);
+ dma_xfer(host, buf, len, DMA_FROM_DEVICE);
+}
+
+/*
+ * fsmc_write_buf_dma - write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void fsmc_write_buf_dma(struct mtd_info *mtd, const uint8_t *buf,
+ int len)
+{
+ struct fsmc_nand_data *host;
+
+ host = container_of(mtd, struct fsmc_nand_data, mtd);
+ dma_xfer(host, (void *)buf, len, DMA_TO_DEVICE);
+}
+
+/*
+ * fsmc_read_page_hwecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller expects OOB data read to chip->oob_poi
+ * @page: page number to read
+ *
+ * This routine is needed for fsmc version 8 as reading from NAND chip has to be
+ * performed in a strict sequence as follows:
+ * data(512 byte) -> ecc(13 byte)
+ * After this read, fsmc hardware generates and reports error data bits(up to a
+ * max of 8 bits)
+ */
+static int fsmc_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ struct fsmc_eccplace *ecc_place = host->ecc_place;
+ int i, j, s, stat, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ int off, len, group = 0;
+ /*
+ * ecc_oob is intentionally taken as uint16_t. In 16bit devices, we
+ * end up reading 14 bytes (7 words) from oob. The local array is
+ * to maintain word alignment
+ */
+ uint16_t ecc_oob[7];
+ uint8_t *oob = (uint8_t *)&ecc_oob[0];
+ unsigned int max_bitflips = 0;
+
+ for (i = 0, s = 0; s < eccsteps; s++, i += eccbytes, p += eccsize) {
+ chip->cmdfunc(mtd, NAND_CMD_READ0, s * eccsize, page);
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+
+ for (j = 0; j < eccbytes;) {
+ off = ecc_place->eccplace[group].offset;
+ len = ecc_place->eccplace[group].length;
+ group++;
+
+ /*
+ * length is intentionally kept a higher multiple of 2
+ * to read at least 13 bytes even in case of 16 bit NAND
+ * devices
+ */
+ if (chip->options & NAND_BUSWIDTH_16)
+ len = roundup(len, 2);
+
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, off, page);
+ chip->read_buf(mtd, oob + j, len);
+ j += len;
+ }
+
+ memcpy(&ecc_code[i], oob, chip->ecc.bytes);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+ }
+
+ return max_bitflips;
+}
+
+/*
+ * fsmc_bch8_correct_data
+ * @mtd: mtd info structure
+ * @dat: buffer of read data
+ * @read_ecc: ecc read from device spare area
+ * @calc_ecc: ecc calculated from read data
+ *
+ * calc_ecc is a 104 bit information containing maximum of 8 error
+ * offset informations of 13 bits each in 512 bytes of read data.
+ */
+static int fsmc_bch8_correct_data(struct mtd_info *mtd, uint8_t *dat,
+ uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+ struct fsmc_nand_data *host = container_of(mtd,
+ struct fsmc_nand_data, mtd);
+ struct nand_chip *chip = mtd->priv;
+ void __iomem *regs = host->regs_va;
+ unsigned int bank = host->bank;
+ uint32_t err_idx[8];
+ uint32_t num_err, i;
+ uint32_t ecc1, ecc2, ecc3, ecc4;
+
+ num_err = (readl_relaxed(FSMC_NAND_REG(regs, bank, STS)) >> 10) & 0xF;
+
+ /* no bit flipping */
+ if (likely(num_err == 0))
+ return 0;
+
+ /* too many errors */
+ if (unlikely(num_err > 8)) {
+ /*
+ * This is a temporary erase check. A newly erased page read
+ * would result in an ecc error because the oob data is also
+ * erased to FF and the calculated ecc for an FF data is not
+ * FF..FF.
+ * This is a workaround to skip performing correction in case
+ * data is FF..FF
+ *
+ * Logic:
+ * For every page, each bit written as 0 is counted until these
+ * number of bits are greater than 8 (the maximum correction
+ * capability of FSMC for each 512 + 13 bytes)
+ */
+
+ int bits_ecc = count_written_bits(read_ecc, chip->ecc.bytes, 8);
+ int bits_data = count_written_bits(dat, chip->ecc.size, 8);
+
+ if ((bits_ecc + bits_data) <= 8) {
+ if (bits_data)
+ memset(dat, 0xff, chip->ecc.size);
+ return bits_data;
+ }
+
+ return -EBADMSG;
+ }
+
+ /*
+ * ------------------- calc_ecc[] bit wise -----------|--13 bits--|
+ * |---idx[7]--|--.....-----|---idx[2]--||---idx[1]--||---idx[0]--|
+ *
+ * calc_ecc is a 104 bit information containing maximum of 8 error
+ * offset informations of 13 bits each. calc_ecc is copied into a
+ * uint64_t array and error offset indexes are populated in err_idx
+ * array
+ */
+ ecc1 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC1));
+ ecc2 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC2));
+ ecc3 = readl_relaxed(FSMC_NAND_REG(regs, bank, ECC3));
+ ecc4 = readl_relaxed(FSMC_NAND_REG(regs, bank, STS));
+
+ err_idx[0] = (ecc1 >> 0) & 0x1FFF;
+ err_idx[1] = (ecc1 >> 13) & 0x1FFF;
+ err_idx[2] = (((ecc2 >> 0) & 0x7F) << 6) | ((ecc1 >> 26) & 0x3F);
+ err_idx[3] = (ecc2 >> 7) & 0x1FFF;
+ err_idx[4] = (((ecc3 >> 0) & 0x1) << 12) | ((ecc2 >> 20) & 0xFFF);
+ err_idx[5] = (ecc3 >> 1) & 0x1FFF;
+ err_idx[6] = (ecc3 >> 14) & 0x1FFF;
+ err_idx[7] = (((ecc4 >> 16) & 0xFF) << 5) | ((ecc3 >> 27) & 0x1F);
+
+ i = 0;
+ while (num_err--) {
+ change_bit(0, (unsigned long *)&err_idx[i]);
+ change_bit(1, (unsigned long *)&err_idx[i]);
+
+ if (err_idx[i] < chip->ecc.size * 8) {
+ change_bit(err_idx[i], (unsigned long *)dat);
+ i++;
+ }
+ }
+ return i;
+}
+
+static bool filter(struct dma_chan *chan, void *slave)
+{
+ chan->private = slave;
+ return true;
+}
+
+#ifdef CONFIG_OF
+static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
+ struct device_node *np)
+{
+ struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ u32 val;
+ int ret;
+
+ /* Set default NAND width to 8 bits */
+ pdata->width = 8;
+ if (!of_property_read_u32(np, "bank-width", &val)) {
+ if (val == 2) {
+ pdata->width = 16;
+ } else if (val != 1) {
+ dev_err(&pdev->dev, "invalid bank-width %u\n", val);
+ return -EINVAL;
+ }
+ }
+ if (of_get_property(np, "nand-skip-bbtscan", NULL))
+ pdata->options = NAND_SKIP_BBTSCAN;
+
+ pdata->nand_timings = devm_kzalloc(&pdev->dev,
+ sizeof(*pdata->nand_timings), GFP_KERNEL);
+ if (!pdata->nand_timings)
+ return -ENOMEM;
+ ret = of_property_read_u8_array(np, "timings", (u8 *)pdata->nand_timings,
+ sizeof(*pdata->nand_timings));
+ if (ret) {
+ dev_info(&pdev->dev, "No timings in dts specified, using default timings!\n");
+ pdata->nand_timings = NULL;
+ }
+
+ /* Set default NAND bank to 0 */
+ pdata->bank = 0;
+ if (!of_property_read_u32(np, "bank", &val)) {
+ if (val > 3) {
+ dev_err(&pdev->dev, "invalid bank %u\n", val);
+ return -EINVAL;
+ }
+ pdata->bank = val;
+ }
+ return 0;
+}
+#else
+static int fsmc_nand_probe_config_dt(struct platform_device *pdev,
+ struct device_node *np)
+{
+ return -ENOSYS;
+}
+#endif
+
+/*
+ * fsmc_nand_probe - Probe function
+ * @pdev: platform device structure
+ */
+static int __init fsmc_nand_probe(struct platform_device *pdev)
+{
+ struct fsmc_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device_node __maybe_unused *np = pdev->dev.of_node;
+ struct mtd_part_parser_data ppdata = {};
+ struct fsmc_nand_data *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ struct resource *res;
+ dma_cap_mask_t mask;
+ int ret = 0;
+ u32 pid;
+ int i;
+
+ if (np) {
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ pdev->dev.platform_data = pdata;
+ ret = fsmc_nand_probe_config_dt(pdev, np);
+ if (ret) {
+ dev_err(&pdev->dev, "no platform data\n");
+ return -ENODEV;
+ }
+ }
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "platform data is NULL\n");
+ return -EINVAL;
+ }
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+ host->data_va = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->data_va))
+ return PTR_ERR(host->data_va);
+
+ host->data_pa = (dma_addr_t)res->start;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
+ host->addr_va = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->addr_va))
+ return PTR_ERR(host->addr_va);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
+ host->cmd_va = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->cmd_va))
+ return PTR_ERR(host->cmd_va);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "fsmc_regs");
+ host->regs_va = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->regs_va))
+ return PTR_ERR(host->regs_va);
+
+ host->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk)) {
+ dev_err(&pdev->dev, "failed to fetch block clock\n");
+ return PTR_ERR(host->clk);
+ }
+
+ ret = clk_prepare_enable(host->clk);
+ if (ret)
+ goto err_clk_prepare_enable;
+
+ /*
+ * This device ID is actually a common AMBA ID as used on the
+ * AMBA PrimeCell bus. However it is not a PrimeCell.
+ */
+ for (pid = 0, i = 0; i < 4; i++)
+ pid |= (readl(host->regs_va + resource_size(res) - 0x20 + 4 * i) & 255) << (i * 8);
+ host->pid = pid;
+ dev_info(&pdev->dev, "FSMC device partno %03x, manufacturer %02x, "
+ "revision %02x, config %02x\n",
+ AMBA_PART_BITS(pid), AMBA_MANF_BITS(pid),
+ AMBA_REV_BITS(pid), AMBA_CONFIG_BITS(pid));
+
+ host->bank = pdata->bank;
+ host->select_chip = pdata->select_bank;
+ host->partitions = pdata->partitions;
+ host->nr_partitions = pdata->nr_partitions;
+ host->dev = &pdev->dev;
+ host->dev_timings = pdata->nand_timings;
+ host->mode = pdata->mode;
+
+ if (host->mode == USE_DMA_ACCESS)
+ init_completion(&host->dma_access_complete);
+
+ /* Link all private pointers */
+ mtd = &host->mtd;
+ nand = &host->nand;
+ mtd->priv = nand;
+ nand->priv = host;
+
+ host->mtd.dev.parent = &pdev->dev;
+ nand->IO_ADDR_R = host->data_va;
+ nand->IO_ADDR_W = host->data_va;
+ nand->cmd_ctrl = fsmc_cmd_ctrl;
+ nand->chip_delay = 30;
+
+ /*
+ * Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
+ * can overwrite this value if the DT provides a different value.
+ */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.hwctl = fsmc_enable_hwecc;
+ nand->ecc.size = 512;
+ nand->options = pdata->options;
+ nand->select_chip = fsmc_select_chip;
+ nand->badblockbits = 7;
+ nand->flash_node = np;
+
+ if (pdata->width == FSMC_NAND_BW16)
+ nand->options |= NAND_BUSWIDTH_16;
+
+ switch (host->mode) {
+ case USE_DMA_ACCESS:
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_MEMCPY, mask);
+ host->read_dma_chan = dma_request_channel(mask, filter,
+ pdata->read_dma_priv);
+ if (!host->read_dma_chan) {
+ dev_err(&pdev->dev, "Unable to get read dma channel\n");
+ goto err_req_read_chnl;
+ }
+ host->write_dma_chan = dma_request_channel(mask, filter,
+ pdata->write_dma_priv);
+ if (!host->write_dma_chan) {
+ dev_err(&pdev->dev, "Unable to get write dma channel\n");
+ goto err_req_write_chnl;
+ }
+ nand->read_buf = fsmc_read_buf_dma;
+ nand->write_buf = fsmc_write_buf_dma;
+ break;
+
+ default:
+ case USE_WORD_ACCESS:
+ nand->read_buf = fsmc_read_buf;
+ nand->write_buf = fsmc_write_buf;
+ break;
+ }
+
+ fsmc_nand_setup(host->regs_va, host->bank,
+ nand->options & NAND_BUSWIDTH_16,
+ host->dev_timings);
+
+ if (AMBA_REV_BITS(host->pid) >= 8) {
+ nand->ecc.read_page = fsmc_read_page_hwecc;
+ nand->ecc.calculate = fsmc_read_hwecc_ecc4;
+ nand->ecc.correct = fsmc_bch8_correct_data;
+ nand->ecc.bytes = 13;
+ nand->ecc.strength = 8;
+ }
+
+ /*
+ * Scan to find existence of the device
+ */
+ if (nand_scan_ident(&host->mtd, 1, NULL)) {
+ ret = -ENXIO;
+ dev_err(&pdev->dev, "No NAND Device found!\n");
+ goto err_scan_ident;
+ }
+
+ if (AMBA_REV_BITS(host->pid) >= 8) {
+ switch (host->mtd.oobsize) {
+ case 16:
+ nand->ecc.layout = &fsmc_ecc4_16_layout;
+ host->ecc_place = &fsmc_ecc4_sp_place;
+ break;
+ case 64:
+ nand->ecc.layout = &fsmc_ecc4_64_layout;
+ host->ecc_place = &fsmc_ecc4_lp_place;
+ break;
+ case 128:
+ nand->ecc.layout = &fsmc_ecc4_128_layout;
+ host->ecc_place = &fsmc_ecc4_lp_place;
+ break;
+ case 224:
+ nand->ecc.layout = &fsmc_ecc4_224_layout;
+ host->ecc_place = &fsmc_ecc4_lp_place;
+ break;
+ case 256:
+ nand->ecc.layout = &fsmc_ecc4_256_layout;
+ host->ecc_place = &fsmc_ecc4_lp_place;
+ break;
+ default:
+ dev_warn(&pdev->dev, "No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
+ ret = -EINVAL;
+ goto err_probe;
+ }
+ } else {
+ switch (nand->ecc.mode) {
+ case NAND_ECC_HW:
+ dev_info(&pdev->dev, "Using 1-bit HW ECC scheme\n");
+ nand->ecc.calculate = fsmc_read_hwecc_ecc1;
+ nand->ecc.correct = nand_correct_data;
+ nand->ecc.bytes = 3;
+ nand->ecc.strength = 1;
+ break;
+
+ case NAND_ECC_SOFT_BCH:
+ dev_info(&pdev->dev, "Using 4-bit SW BCH ECC scheme\n");
+ break;
+
+ default:
+ dev_err(&pdev->dev, "Unsupported ECC mode!\n");
+ goto err_probe;
+ }
+
+ /*
+ * Don't set layout for BCH4 SW ECC. This will be
+ * generated later in nand_bch_init() later.
+ */
+ if (nand->ecc.mode != NAND_ECC_SOFT_BCH) {
+ switch (host->mtd.oobsize) {
+ case 16:
+ nand->ecc.layout = &fsmc_ecc1_16_layout;
+ break;
+ case 64:
+ nand->ecc.layout = &fsmc_ecc1_64_layout;
+ break;
+ case 128:
+ nand->ecc.layout = &fsmc_ecc1_128_layout;
+ break;
+ default:
+ dev_warn(&pdev->dev,
+ "No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
+ ret = -EINVAL;
+ goto err_probe;
+ }
+ }
+ }
+
+ /* Second stage of scan to fill MTD data-structures */
+ if (nand_scan_tail(&host->mtd)) {
+ ret = -ENXIO;
+ goto err_probe;
+ }
+
+ /*
+ * The partition information can is accessed by (in the same precedence)
+ *
+ * command line through Bootloader,
+ * platform data,
+ * default partition information present in driver.
+ */
+ /*
+ * Check for partition info passed
+ */
+ host->mtd.name = "nand";
+ ppdata.of_node = np;
+ ret = mtd_device_parse_register(&host->mtd, NULL, &ppdata,
+ host->partitions, host->nr_partitions);
+ if (ret)
+ goto err_probe;
+
+ platform_set_drvdata(pdev, host);
+ dev_info(&pdev->dev, "FSMC NAND driver registration successful\n");
+ return 0;
+
+err_probe:
+err_scan_ident:
+ if (host->mode == USE_DMA_ACCESS)
+ dma_release_channel(host->write_dma_chan);
+err_req_write_chnl:
+ if (host->mode == USE_DMA_ACCESS)
+ dma_release_channel(host->read_dma_chan);
+err_req_read_chnl:
+ clk_disable_unprepare(host->clk);
+err_clk_prepare_enable:
+ clk_put(host->clk);
+ return ret;
+}
+
+/*
+ * Clean up routine
+ */
+static int fsmc_nand_remove(struct platform_device *pdev)
+{
+ struct fsmc_nand_data *host = platform_get_drvdata(pdev);
+
+ if (host) {
+ nand_release(&host->mtd);
+
+ if (host->mode == USE_DMA_ACCESS) {
+ dma_release_channel(host->write_dma_chan);
+ dma_release_channel(host->read_dma_chan);
+ }
+ clk_disable_unprepare(host->clk);
+ clk_put(host->clk);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int fsmc_nand_suspend(struct device *dev)
+{
+ struct fsmc_nand_data *host = dev_get_drvdata(dev);
+ if (host)
+ clk_disable_unprepare(host->clk);
+ return 0;
+}
+
+static int fsmc_nand_resume(struct device *dev)
+{
+ struct fsmc_nand_data *host = dev_get_drvdata(dev);
+ if (host) {
+ clk_prepare_enable(host->clk);
+ fsmc_nand_setup(host->regs_va, host->bank,
+ host->nand.options & NAND_BUSWIDTH_16,
+ host->dev_timings);
+ }
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(fsmc_nand_pm_ops, fsmc_nand_suspend, fsmc_nand_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id fsmc_nand_id_table[] = {
+ { .compatible = "st,spear600-fsmc-nand" },
+ { .compatible = "stericsson,fsmc-nand" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, fsmc_nand_id_table);
+#endif
+
+static struct platform_driver fsmc_nand_driver = {
+ .remove = fsmc_nand_remove,
+ .driver = {
+ .name = "fsmc-nand",
+ .of_match_table = of_match_ptr(fsmc_nand_id_table),
+ .pm = &fsmc_nand_pm_ops,
+ },
+};
+
+module_platform_driver_probe(fsmc_nand_driver, fsmc_nand_probe);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vipin Kumar <vipin.kumar@st.com>, Ashish Priyadarshi");
+MODULE_DESCRIPTION("NAND driver for SPEAr Platforms");
diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c
new file mode 100644
index 0000000..9ab97f9
--- /dev/null
+++ b/drivers/mtd/nand/gpio.c
@@ -0,0 +1,321 @@
+/*
+ * drivers/mtd/nand/gpio.c
+ *
+ * Updated, and converted to generic GPIO based driver by Russell King.
+ *
+ * Written by Ben Dooks <ben@simtec.co.uk>
+ * Based on 2.4 version by Mark Whittaker
+ *
+ * © 2004 Simtec Electronics
+ *
+ * Device driver for NAND flash that uses a memory mapped interface to
+ * read/write the NAND commands and data, and GPIO pins for control signals
+ * (the DT binding refers to this as "GPIO assisted NAND flash")
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/nand-gpio.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+
+struct gpiomtd {
+ void __iomem *io_sync;
+ struct mtd_info mtd_info;
+ struct nand_chip nand_chip;
+ struct gpio_nand_platdata plat;
+};
+
+#define gpio_nand_getpriv(x) container_of(x, struct gpiomtd, mtd_info)
+
+
+#ifdef CONFIG_ARM
+/* gpio_nand_dosync()
+ *
+ * Make sure the GPIO state changes occur in-order with writes to NAND
+ * memory region.
+ * Needed on PXA due to bus-reordering within the SoC itself (see section on
+ * I/O ordering in PXA manual (section 2.3, p35)
+ */
+static void gpio_nand_dosync(struct gpiomtd *gpiomtd)
+{
+ unsigned long tmp;
+
+ if (gpiomtd->io_sync) {
+ /*
+ * Linux memory barriers don't cater for what's required here.
+ * What's required is what's here - a read from a separate
+ * region with a dependency on that read.
+ */
+ tmp = readl(gpiomtd->io_sync);
+ asm volatile("mov %1, %0\n" : "=r" (tmp) : "r" (tmp));
+ }
+}
+#else
+static inline void gpio_nand_dosync(struct gpiomtd *gpiomtd) {}
+#endif
+
+static void gpio_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
+
+ gpio_nand_dosync(gpiomtd);
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ gpio_set_value(gpiomtd->plat.gpio_nce, !(ctrl & NAND_NCE));
+ gpio_set_value(gpiomtd->plat.gpio_cle, !!(ctrl & NAND_CLE));
+ gpio_set_value(gpiomtd->plat.gpio_ale, !!(ctrl & NAND_ALE));
+ gpio_nand_dosync(gpiomtd);
+ }
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ writeb(cmd, gpiomtd->nand_chip.IO_ADDR_W);
+ gpio_nand_dosync(gpiomtd);
+}
+
+static int gpio_nand_devready(struct mtd_info *mtd)
+{
+ struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd);
+
+ return gpio_get_value(gpiomtd->plat.gpio_rdy);
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id gpio_nand_id_table[] = {
+ { .compatible = "gpio-control-nand" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, gpio_nand_id_table);
+
+static int gpio_nand_get_config_of(const struct device *dev,
+ struct gpio_nand_platdata *plat)
+{
+ u32 val;
+
+ if (!dev->of_node)
+ return -ENODEV;
+
+ if (!of_property_read_u32(dev->of_node, "bank-width", &val)) {
+ if (val == 2) {
+ plat->options |= NAND_BUSWIDTH_16;
+ } else if (val != 1) {
+ dev_err(dev, "invalid bank-width %u\n", val);
+ return -EINVAL;
+ }
+ }
+
+ plat->gpio_rdy = of_get_gpio(dev->of_node, 0);
+ plat->gpio_nce = of_get_gpio(dev->of_node, 1);
+ plat->gpio_ale = of_get_gpio(dev->of_node, 2);
+ plat->gpio_cle = of_get_gpio(dev->of_node, 3);
+ plat->gpio_nwp = of_get_gpio(dev->of_node, 4);
+
+ if (!of_property_read_u32(dev->of_node, "chip-delay", &val))
+ plat->chip_delay = val;
+
+ return 0;
+}
+
+static struct resource *gpio_nand_get_io_sync_of(struct platform_device *pdev)
+{
+ struct resource *r;
+ u64 addr;
+
+ if (of_property_read_u64(pdev->dev.of_node,
+ "gpio-control-nand,io-sync-reg", &addr))
+ return NULL;
+
+ r = devm_kzalloc(&pdev->dev, sizeof(*r), GFP_KERNEL);
+ if (!r)
+ return NULL;
+
+ r->start = addr;
+ r->end = r->start + 0x3;
+ r->flags = IORESOURCE_MEM;
+
+ return r;
+}
+#else /* CONFIG_OF */
+static inline int gpio_nand_get_config_of(const struct device *dev,
+ struct gpio_nand_platdata *plat)
+{
+ return -ENOSYS;
+}
+
+static inline struct resource *
+gpio_nand_get_io_sync_of(struct platform_device *pdev)
+{
+ return NULL;
+}
+#endif /* CONFIG_OF */
+
+static inline int gpio_nand_get_config(const struct device *dev,
+ struct gpio_nand_platdata *plat)
+{
+ int ret = gpio_nand_get_config_of(dev, plat);
+
+ if (!ret)
+ return ret;
+
+ if (dev_get_platdata(dev)) {
+ memcpy(plat, dev_get_platdata(dev), sizeof(*plat));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static inline struct resource *
+gpio_nand_get_io_sync(struct platform_device *pdev)
+{
+ struct resource *r = gpio_nand_get_io_sync_of(pdev);
+
+ if (r)
+ return r;
+
+ return platform_get_resource(pdev, IORESOURCE_MEM, 1);
+}
+
+static int gpio_nand_remove(struct platform_device *pdev)
+{
+ struct gpiomtd *gpiomtd = platform_get_drvdata(pdev);
+
+ nand_release(&gpiomtd->mtd_info);
+
+ if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+ gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+ gpio_set_value(gpiomtd->plat.gpio_nce, 1);
+
+ return 0;
+}
+
+static int gpio_nand_probe(struct platform_device *pdev)
+{
+ struct gpiomtd *gpiomtd;
+ struct nand_chip *chip;
+ struct resource *res;
+ struct mtd_part_parser_data ppdata = {};
+ int ret = 0;
+
+ if (!pdev->dev.of_node && !dev_get_platdata(&pdev->dev))
+ return -EINVAL;
+
+ gpiomtd = devm_kzalloc(&pdev->dev, sizeof(*gpiomtd), GFP_KERNEL);
+ if (!gpiomtd)
+ return -ENOMEM;
+
+ chip = &gpiomtd->nand_chip;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(chip->IO_ADDR_R))
+ return PTR_ERR(chip->IO_ADDR_R);
+
+ res = gpio_nand_get_io_sync(pdev);
+ if (res) {
+ gpiomtd->io_sync = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(gpiomtd->io_sync))
+ return PTR_ERR(gpiomtd->io_sync);
+ }
+
+ ret = gpio_nand_get_config(&pdev->dev, &gpiomtd->plat);
+ if (ret)
+ return ret;
+
+ ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nce, "NAND NCE");
+ if (ret)
+ return ret;
+ gpio_direction_output(gpiomtd->plat.gpio_nce, 1);
+
+ if (gpio_is_valid(gpiomtd->plat.gpio_nwp)) {
+ ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_nwp,
+ "NAND NWP");
+ if (ret)
+ return ret;
+ }
+
+ ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_ale, "NAND ALE");
+ if (ret)
+ return ret;
+ gpio_direction_output(gpiomtd->plat.gpio_ale, 0);
+
+ ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_cle, "NAND CLE");
+ if (ret)
+ return ret;
+ gpio_direction_output(gpiomtd->plat.gpio_cle, 0);
+
+ if (gpio_is_valid(gpiomtd->plat.gpio_rdy)) {
+ ret = devm_gpio_request(&pdev->dev, gpiomtd->plat.gpio_rdy,
+ "NAND RDY");
+ if (ret)
+ return ret;
+ gpio_direction_input(gpiomtd->plat.gpio_rdy);
+ chip->dev_ready = gpio_nand_devready;
+ }
+
+ chip->IO_ADDR_W = chip->IO_ADDR_R;
+ chip->ecc.mode = NAND_ECC_SOFT;
+ chip->options = gpiomtd->plat.options;
+ chip->chip_delay = gpiomtd->plat.chip_delay;
+ chip->cmd_ctrl = gpio_nand_cmd_ctrl;
+
+ gpiomtd->mtd_info.priv = chip;
+ gpiomtd->mtd_info.dev.parent = &pdev->dev;
+
+ platform_set_drvdata(pdev, gpiomtd);
+
+ if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+ gpio_direction_output(gpiomtd->plat.gpio_nwp, 1);
+
+ if (nand_scan(&gpiomtd->mtd_info, 1)) {
+ ret = -ENXIO;
+ goto err_wp;
+ }
+
+ if (gpiomtd->plat.adjust_parts)
+ gpiomtd->plat.adjust_parts(&gpiomtd->plat,
+ gpiomtd->mtd_info.size);
+
+ ppdata.of_node = pdev->dev.of_node;
+ ret = mtd_device_parse_register(&gpiomtd->mtd_info, NULL, &ppdata,
+ gpiomtd->plat.parts,
+ gpiomtd->plat.num_parts);
+ if (!ret)
+ return 0;
+
+err_wp:
+ if (gpio_is_valid(gpiomtd->plat.gpio_nwp))
+ gpio_set_value(gpiomtd->plat.gpio_nwp, 0);
+
+ return ret;
+}
+
+static struct platform_driver gpio_nand_driver = {
+ .probe = gpio_nand_probe,
+ .remove = gpio_nand_remove,
+ .driver = {
+ .name = "gpio-nand",
+ .of_match_table = of_match_ptr(gpio_nand_id_table),
+ },
+};
+
+module_platform_driver(gpio_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("GPIO NAND Driver");
diff --git a/drivers/mtd/nand/gpmi-nand/Makefile b/drivers/mtd/nand/gpmi-nand/Makefile
new file mode 100644
index 0000000..3a46248
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/Makefile
@@ -0,0 +1,3 @@
+obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o
+gpmi_nand-objs += gpmi-nand.o
+gpmi_nand-objs += gpmi-lib.o
diff --git a/drivers/mtd/nand/gpmi-nand/bch-regs.h b/drivers/mtd/nand/gpmi-nand/bch-regs.h
new file mode 100644
index 0000000..05bb91f
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/bch-regs.h
@@ -0,0 +1,128 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_BCH_REGS_H
+#define __GPMI_NAND_BCH_REGS_H
+
+#define HW_BCH_CTRL 0x00000000
+#define HW_BCH_CTRL_SET 0x00000004
+#define HW_BCH_CTRL_CLR 0x00000008
+#define HW_BCH_CTRL_TOG 0x0000000c
+
+#define BM_BCH_CTRL_COMPLETE_IRQ_EN (1 << 8)
+#define BM_BCH_CTRL_COMPLETE_IRQ (1 << 0)
+
+#define HW_BCH_STATUS0 0x00000010
+#define HW_BCH_MODE 0x00000020
+#define HW_BCH_ENCODEPTR 0x00000030
+#define HW_BCH_DATAPTR 0x00000040
+#define HW_BCH_METAPTR 0x00000050
+#define HW_BCH_LAYOUTSELECT 0x00000070
+
+#define HW_BCH_FLASH0LAYOUT0 0x00000080
+
+#define BP_BCH_FLASH0LAYOUT0_NBLOCKS 24
+#define BM_BCH_FLASH0LAYOUT0_NBLOCKS (0xff << BP_BCH_FLASH0LAYOUT0_NBLOCKS)
+#define BF_BCH_FLASH0LAYOUT0_NBLOCKS(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_NBLOCKS) & BM_BCH_FLASH0LAYOUT0_NBLOCKS)
+
+#define BP_BCH_FLASH0LAYOUT0_META_SIZE 16
+#define BM_BCH_FLASH0LAYOUT0_META_SIZE (0xff << BP_BCH_FLASH0LAYOUT0_META_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_META_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT0_META_SIZE)\
+ & BM_BCH_FLASH0LAYOUT0_META_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT0_ECC0 12
+#define BM_BCH_FLASH0LAYOUT0_ECC0 (0xf << BP_BCH_FLASH0LAYOUT0_ECC0)
+#define MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0 11
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0 (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0)
+#define BF_BCH_FLASH0LAYOUT0_ECC0(v, x) \
+ (GPMI_IS_MX6(x) \
+ ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT0_ECC0) \
+ & MX6Q_BM_BCH_FLASH0LAYOUT0_ECC0) \
+ : (((v) << BP_BCH_FLASH0LAYOUT0_ECC0) \
+ & BM_BCH_FLASH0LAYOUT0_ECC0) \
+ )
+
+#define MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14 10
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14 \
+ (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14)
+#define BF_BCH_FLASH0LAYOUT0_GF(v, x) \
+ ((GPMI_IS_MX6(x) && ((v) == 14)) \
+ ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT0_GF_13_14) \
+ & MX6Q_BM_BCH_FLASH0LAYOUT0_GF_13_14) \
+ : 0 \
+ )
+
+#define BP_BCH_FLASH0LAYOUT0_DATA0_SIZE 0
+#define BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
+ (0xfff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE \
+ (0x3ff << BP_BCH_FLASH0LAYOUT0_DATA0_SIZE)
+#define BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(v, x) \
+ (GPMI_IS_MX6(x) \
+ ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \
+ : ((v) & BM_BCH_FLASH0LAYOUT0_DATA0_SIZE) \
+ )
+
+#define HW_BCH_FLASH0LAYOUT1 0x00000090
+
+#define BP_BCH_FLASH0LAYOUT1_PAGE_SIZE 16
+#define BM_BCH_FLASH0LAYOUT1_PAGE_SIZE \
+ (0xffff << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(v) \
+ (((v) << BP_BCH_FLASH0LAYOUT1_PAGE_SIZE) \
+ & BM_BCH_FLASH0LAYOUT1_PAGE_SIZE)
+
+#define BP_BCH_FLASH0LAYOUT1_ECCN 12
+#define BM_BCH_FLASH0LAYOUT1_ECCN (0xf << BP_BCH_FLASH0LAYOUT1_ECCN)
+#define MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN 11
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN (0x1f << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN)
+#define BF_BCH_FLASH0LAYOUT1_ECCN(v, x) \
+ (GPMI_IS_MX6(x) \
+ ? (((v) << MX6Q_BP_BCH_FLASH0LAYOUT1_ECCN) \
+ & MX6Q_BM_BCH_FLASH0LAYOUT1_ECCN) \
+ : (((v) << BP_BCH_FLASH0LAYOUT1_ECCN) \
+ & BM_BCH_FLASH0LAYOUT1_ECCN) \
+ )
+
+#define MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14 10
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14 \
+ (0x1 << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14)
+#define BF_BCH_FLASH0LAYOUT1_GF(v, x) \
+ ((GPMI_IS_MX6(x) && ((v) == 14)) \
+ ? (((1) << MX6Q_BP_BCH_FLASH0LAYOUT1_GF_13_14) \
+ & MX6Q_BM_BCH_FLASH0LAYOUT1_GF_13_14) \
+ : 0 \
+ )
+
+#define BP_BCH_FLASH0LAYOUT1_DATAN_SIZE 0
+#define BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
+ (0xfff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE \
+ (0x3ff << BP_BCH_FLASH0LAYOUT1_DATAN_SIZE)
+#define BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(v, x) \
+ (GPMI_IS_MX6(x) \
+ ? (((v) >> 2) & MX6Q_BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
+ : ((v) & BM_BCH_FLASH0LAYOUT1_DATAN_SIZE) \
+ )
+
+#define HW_BCH_VERSION 0x00000160
+#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
new file mode 100644
index 0000000..43fa16b
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c
@@ -0,0 +1,1508 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+
+#include "gpmi-nand.h"
+#include "gpmi-regs.h"
+#include "bch-regs.h"
+
+static struct timing_threshod timing_default_threshold = {
+ .max_data_setup_cycles = (BM_GPMI_TIMING0_DATA_SETUP >>
+ BP_GPMI_TIMING0_DATA_SETUP),
+ .internal_data_setup_in_ns = 0,
+ .max_sample_delay_factor = (BM_GPMI_CTRL1_RDN_DELAY >>
+ BP_GPMI_CTRL1_RDN_DELAY),
+ .max_dll_clock_period_in_ns = 32,
+ .max_dll_delay_in_ns = 16,
+};
+
+#define MXS_SET_ADDR 0x4
+#define MXS_CLR_ADDR 0x8
+/*
+ * Clear the bit and poll it cleared. This is usually called with
+ * a reset address and mask being either SFTRST(bit 31) or CLKGATE
+ * (bit 30).
+ */
+static int clear_poll_bit(void __iomem *addr, u32 mask)
+{
+ int timeout = 0x400;
+
+ /* clear the bit */
+ writel(mask, addr + MXS_CLR_ADDR);
+
+ /*
+ * SFTRST needs 3 GPMI clocks to settle, the reference manual
+ * recommends to wait 1us.
+ */
+ udelay(1);
+
+ /* poll the bit becoming clear */
+ while ((readl(addr) & mask) && --timeout)
+ /* nothing */;
+
+ return !timeout;
+}
+
+#define MODULE_CLKGATE (1 << 30)
+#define MODULE_SFTRST (1 << 31)
+/*
+ * The current mxs_reset_block() will do two things:
+ * [1] enable the module.
+ * [2] reset the module.
+ *
+ * In most of the cases, it's ok.
+ * But in MX23, there is a hardware bug in the BCH block (see erratum #2847).
+ * If you try to soft reset the BCH block, it becomes unusable until
+ * the next hard reset. This case occurs in the NAND boot mode. When the board
+ * boots by NAND, the ROM of the chip will initialize the BCH blocks itself.
+ * So If the driver tries to reset the BCH again, the BCH will not work anymore.
+ * You will see a DMA timeout in this case. The bug has been fixed
+ * in the following chips, such as MX28.
+ *
+ * To avoid this bug, just add a new parameter `just_enable` for
+ * the mxs_reset_block(), and rewrite it here.
+ */
+static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable)
+{
+ int ret;
+ int timeout = 0x400;
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear CLKGATE */
+ writel(MODULE_CLKGATE, reset_addr + MXS_CLR_ADDR);
+
+ if (!just_enable) {
+ /* set SFTRST to reset the block */
+ writel(MODULE_SFTRST, reset_addr + MXS_SET_ADDR);
+ udelay(1);
+
+ /* poll CLKGATE becoming set */
+ while ((!(readl(reset_addr) & MODULE_CLKGATE)) && --timeout)
+ /* nothing */;
+ if (unlikely(!timeout))
+ goto error;
+ }
+
+ /* clear and poll SFTRST */
+ ret = clear_poll_bit(reset_addr, MODULE_SFTRST);
+ if (unlikely(ret))
+ goto error;
+
+ /* clear and poll CLKGATE */
+ ret = clear_poll_bit(reset_addr, MODULE_CLKGATE);
+ if (unlikely(ret))
+ goto error;
+
+ return 0;
+
+error:
+ pr_err("%s(%p): module reset timeout\n", __func__, reset_addr);
+ return -ETIMEDOUT;
+}
+
+static int __gpmi_enable_clk(struct gpmi_nand_data *this, bool v)
+{
+ struct clk *clk;
+ int ret;
+ int i;
+
+ for (i = 0; i < GPMI_CLK_MAX; i++) {
+ clk = this->resources.clock[i];
+ if (!clk)
+ break;
+
+ if (v) {
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto err_clk;
+ } else {
+ clk_disable_unprepare(clk);
+ }
+ }
+ return 0;
+
+err_clk:
+ for (; i > 0; i--)
+ clk_disable_unprepare(this->resources.clock[i - 1]);
+ return ret;
+}
+
+#define gpmi_enable_clk(x) __gpmi_enable_clk(x, true)
+#define gpmi_disable_clk(x) __gpmi_enable_clk(x, false)
+
+int gpmi_init(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ int ret;
+
+ ret = gpmi_enable_clk(this);
+ if (ret)
+ goto err_out;
+ ret = gpmi_reset_block(r->gpmi_regs, false);
+ if (ret)
+ goto err_out;
+
+ /*
+ * Reset BCH here, too. We got failures otherwise :(
+ * See later BCH reset for explanation of MX23 handling
+ */
+ ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+ if (ret)
+ goto err_out;
+
+
+ /* Choose NAND mode. */
+ writel(BM_GPMI_CTRL1_GPMI_MODE, r->gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* Set the IRQ polarity. */
+ writel(BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY,
+ r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Disable Write-Protection. */
+ writel(BM_GPMI_CTRL1_DEV_RESET, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* Select BCH ECC. */
+ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /*
+ * Decouple the chip select from dma channel. We use dma0 for all
+ * the chips.
+ */
+ writel(BM_GPMI_CTRL1_DECOUPLE_CS, r->gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ gpmi_disable_clk(this);
+ return 0;
+err_out:
+ return ret;
+}
+
+/* This function is very useful. It is called only when the bug occur. */
+void gpmi_dump_info(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct bch_geometry *geo = &this->bch_geometry;
+ u32 reg;
+ int i;
+
+ dev_err(this->dev, "Show GPMI registers :\n");
+ for (i = 0; i <= HW_GPMI_DEBUG / 0x10 + 1; i++) {
+ reg = readl(r->gpmi_regs + i * 0x10);
+ dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+ }
+
+ /* start to print out the BCH info */
+ dev_err(this->dev, "Show BCH registers :\n");
+ for (i = 0; i <= HW_BCH_VERSION / 0x10 + 1; i++) {
+ reg = readl(r->bch_regs + i * 0x10);
+ dev_err(this->dev, "offset 0x%.3x : 0x%.8x\n", i * 0x10, reg);
+ }
+ dev_err(this->dev, "BCH Geometry :\n"
+ "GF length : %u\n"
+ "ECC Strength : %u\n"
+ "Page Size in Bytes : %u\n"
+ "Metadata Size in Bytes : %u\n"
+ "ECC Chunk Size in Bytes: %u\n"
+ "ECC Chunk Count : %u\n"
+ "Payload Size in Bytes : %u\n"
+ "Auxiliary Size in Bytes: %u\n"
+ "Auxiliary Status Offset: %u\n"
+ "Block Mark Byte Offset : %u\n"
+ "Block Mark Bit Offset : %u\n",
+ geo->gf_len,
+ geo->ecc_strength,
+ geo->page_size,
+ geo->metadata_size,
+ geo->ecc_chunk_size,
+ geo->ecc_chunk_count,
+ geo->payload_size,
+ geo->auxiliary_size,
+ geo->auxiliary_status_offset,
+ geo->block_mark_byte_offset,
+ geo->block_mark_bit_offset);
+}
+
+/* Configures the geometry for BCH. */
+int bch_set_geometry(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ struct bch_geometry *bch_geo = &this->bch_geometry;
+ unsigned int block_count;
+ unsigned int block_size;
+ unsigned int metadata_size;
+ unsigned int ecc_strength;
+ unsigned int page_size;
+ unsigned int gf_len;
+ int ret;
+
+ if (common_nfc_set_geometry(this))
+ return !0;
+
+ block_count = bch_geo->ecc_chunk_count - 1;
+ block_size = bch_geo->ecc_chunk_size;
+ metadata_size = bch_geo->metadata_size;
+ ecc_strength = bch_geo->ecc_strength >> 1;
+ page_size = bch_geo->page_size;
+ gf_len = bch_geo->gf_len;
+
+ ret = gpmi_enable_clk(this);
+ if (ret)
+ goto err_out;
+
+ /*
+ * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this
+ * chip, otherwise it will lock up. So we skip resetting BCH on the MX23.
+ * On the other hand, the MX28 needs the reset, because one case has been
+ * seen where the BCH produced ECC errors constantly after 10000
+ * consecutive reboots. The latter case has not been seen on the MX23
+ * yet, still we don't know if it could happen there as well.
+ */
+ ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this));
+ if (ret)
+ goto err_out;
+
+ /* Configure layout 0. */
+ writel(BF_BCH_FLASH0LAYOUT0_NBLOCKS(block_count)
+ | BF_BCH_FLASH0LAYOUT0_META_SIZE(metadata_size)
+ | BF_BCH_FLASH0LAYOUT0_ECC0(ecc_strength, this)
+ | BF_BCH_FLASH0LAYOUT0_GF(gf_len, this)
+ | BF_BCH_FLASH0LAYOUT0_DATA0_SIZE(block_size, this),
+ r->bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+ writel(BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size)
+ | BF_BCH_FLASH0LAYOUT1_ECCN(ecc_strength, this)
+ | BF_BCH_FLASH0LAYOUT1_GF(gf_len, this)
+ | BF_BCH_FLASH0LAYOUT1_DATAN_SIZE(block_size, this),
+ r->bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+ /* Set *all* chip selects to use layout 0. */
+ writel(0, r->bch_regs + HW_BCH_LAYOUTSELECT);
+
+ /* Enable interrupts. */
+ writel(BM_BCH_CTRL_COMPLETE_IRQ_EN,
+ r->bch_regs + HW_BCH_CTRL_SET);
+
+ gpmi_disable_clk(this);
+ return 0;
+err_out:
+ return ret;
+}
+
+/* Converts time in nanoseconds to cycles. */
+static unsigned int ns_to_cycles(unsigned int time,
+ unsigned int period, unsigned int min)
+{
+ unsigned int k;
+
+ k = (time + period - 1) / period;
+ return max(k, min);
+}
+
+#define DEF_MIN_PROP_DELAY 5
+#define DEF_MAX_PROP_DELAY 9
+/* Apply timing to current hardware conditions. */
+static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this,
+ struct gpmi_nfc_hardware_timing *hw)
+{
+ struct timing_threshod *nfc = &timing_default_threshold;
+ struct resources *r = &this->resources;
+ struct nand_chip *nand = &this->nand;
+ struct nand_timing target = this->timing;
+ bool improved_timing_is_available;
+ unsigned long clock_frequency_in_hz;
+ unsigned int clock_period_in_ns;
+ bool dll_use_half_periods;
+ unsigned int dll_delay_shift;
+ unsigned int max_sample_delay_in_ns;
+ unsigned int address_setup_in_cycles;
+ unsigned int data_setup_in_ns;
+ unsigned int data_setup_in_cycles;
+ unsigned int data_hold_in_cycles;
+ int ideal_sample_delay_in_ns;
+ unsigned int sample_delay_factor;
+ int tEYE;
+ unsigned int min_prop_delay_in_ns = DEF_MIN_PROP_DELAY;
+ unsigned int max_prop_delay_in_ns = DEF_MAX_PROP_DELAY;
+
+ /*
+ * If there are multiple chips, we need to relax the timings to allow
+ * for signal distortion due to higher capacitance.
+ */
+ if (nand->numchips > 2) {
+ target.data_setup_in_ns += 10;
+ target.data_hold_in_ns += 10;
+ target.address_setup_in_ns += 10;
+ } else if (nand->numchips > 1) {
+ target.data_setup_in_ns += 5;
+ target.data_hold_in_ns += 5;
+ target.address_setup_in_ns += 5;
+ }
+
+ /* Check if improved timing information is available. */
+ improved_timing_is_available =
+ (target.tREA_in_ns >= 0) &&
+ (target.tRLOH_in_ns >= 0) &&
+ (target.tRHOH_in_ns >= 0);
+
+ /* Inspect the clock. */
+ nfc->clock_frequency_in_hz = clk_get_rate(r->clock[0]);
+ clock_frequency_in_hz = nfc->clock_frequency_in_hz;
+ clock_period_in_ns = NSEC_PER_SEC / clock_frequency_in_hz;
+
+ /*
+ * The NFC quantizes setup and hold parameters in terms of clock cycles.
+ * Here, we quantize the setup and hold timing parameters to the
+ * next-highest clock period to make sure we apply at least the
+ * specified times.
+ *
+ * For data setup and data hold, the hardware interprets a value of zero
+ * as the largest possible delay. This is not what's intended by a zero
+ * in the input parameter, so we impose a minimum of one cycle.
+ */
+ data_setup_in_cycles = ns_to_cycles(target.data_setup_in_ns,
+ clock_period_in_ns, 1);
+ data_hold_in_cycles = ns_to_cycles(target.data_hold_in_ns,
+ clock_period_in_ns, 1);
+ address_setup_in_cycles = ns_to_cycles(target.address_setup_in_ns,
+ clock_period_in_ns, 0);
+
+ /*
+ * The clock's period affects the sample delay in a number of ways:
+ *
+ * (1) The NFC HAL tells us the maximum clock period the sample delay
+ * DLL can tolerate. If the clock period is greater than half that
+ * maximum, we must configure the DLL to be driven by half periods.
+ *
+ * (2) We need to convert from an ideal sample delay, in ns, to a
+ * "sample delay factor," which the NFC uses. This factor depends on
+ * whether we're driving the DLL with full or half periods.
+ * Paraphrasing the reference manual:
+ *
+ * AD = SDF x 0.125 x RP
+ *
+ * where:
+ *
+ * AD is the applied delay, in ns.
+ * SDF is the sample delay factor, which is dimensionless.
+ * RP is the reference period, in ns, which is a full clock period
+ * if the DLL is being driven by full periods, or half that if
+ * the DLL is being driven by half periods.
+ *
+ * Let's re-arrange this in a way that's more useful to us:
+ *
+ * 8
+ * SDF = AD x ----
+ * RP
+ *
+ * The reference period is either the clock period or half that, so this
+ * is:
+ *
+ * 8 AD x DDF
+ * SDF = AD x ----- = --------
+ * f x P P
+ *
+ * where:
+ *
+ * f is 1 or 1/2, depending on how we're driving the DLL.
+ * P is the clock period.
+ * DDF is the DLL Delay Factor, a dimensionless value that
+ * incorporates all the constants in the conversion.
+ *
+ * DDF will be either 8 or 16, both of which are powers of two. We can
+ * reduce the cost of this conversion by using bit shifts instead of
+ * multiplication or division. Thus:
+ *
+ * AD << DDS
+ * SDF = ---------
+ * P
+ *
+ * or
+ *
+ * AD = (SDF >> DDS) x P
+ *
+ * where:
+ *
+ * DDS is the DLL Delay Shift, the logarithm to base 2 of the DDF.
+ */
+ if (clock_period_in_ns > (nfc->max_dll_clock_period_in_ns >> 1)) {
+ dll_use_half_periods = true;
+ dll_delay_shift = 3 + 1;
+ } else {
+ dll_use_half_periods = false;
+ dll_delay_shift = 3;
+ }
+
+ /*
+ * Compute the maximum sample delay the NFC allows, under current
+ * conditions. If the clock is running too slowly, no sample delay is
+ * possible.
+ */
+ if (clock_period_in_ns > nfc->max_dll_clock_period_in_ns)
+ max_sample_delay_in_ns = 0;
+ else {
+ /*
+ * Compute the delay implied by the largest sample delay factor
+ * the NFC allows.
+ */
+ max_sample_delay_in_ns =
+ (nfc->max_sample_delay_factor * clock_period_in_ns) >>
+ dll_delay_shift;
+
+ /*
+ * Check if the implied sample delay larger than the NFC
+ * actually allows.
+ */
+ if (max_sample_delay_in_ns > nfc->max_dll_delay_in_ns)
+ max_sample_delay_in_ns = nfc->max_dll_delay_in_ns;
+ }
+
+ /*
+ * Check if improved timing information is available. If not, we have to
+ * use a less-sophisticated algorithm.
+ */
+ if (!improved_timing_is_available) {
+ /*
+ * Fold the read setup time required by the NFC into the ideal
+ * sample delay.
+ */
+ ideal_sample_delay_in_ns = target.gpmi_sample_delay_in_ns +
+ nfc->internal_data_setup_in_ns;
+
+ /*
+ * The ideal sample delay may be greater than the maximum
+ * allowed by the NFC. If so, we can trade off sample delay time
+ * for more data setup time.
+ *
+ * In each iteration of the following loop, we add a cycle to
+ * the data setup time and subtract a corresponding amount from
+ * the sample delay until we've satisified the constraints or
+ * can't do any better.
+ */
+ while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+ data_setup_in_cycles++;
+ ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ }
+
+ /*
+ * Compute the sample delay factor that corresponds most closely
+ * to the ideal sample delay. If the result is too large for the
+ * NFC, use the maximum value.
+ *
+ * Notice that we use the ns_to_cycles function to compute the
+ * sample delay factor. We do this because the form of the
+ * computation is the same as that for calculating cycles.
+ */
+ sample_delay_factor =
+ ns_to_cycles(
+ ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+
+ /* Skip to the part where we return our results. */
+ goto return_results;
+ }
+
+ /*
+ * If control arrives here, we have more detailed timing information,
+ * so we can use a better algorithm.
+ */
+
+ /*
+ * Fold the read setup time required by the NFC into the maximum
+ * propagation delay.
+ */
+ max_prop_delay_in_ns += nfc->internal_data_setup_in_ns;
+
+ /*
+ * Earlier, we computed the number of clock cycles required to satisfy
+ * the data setup time. Now, we need to know the actual nanoseconds.
+ */
+ data_setup_in_ns = clock_period_in_ns * data_setup_in_cycles;
+
+ /*
+ * Compute tEYE, the width of the data eye when reading from the NAND
+ * Flash. The eye width is fundamentally determined by the data setup
+ * time, perturbed by propagation delays and some characteristics of the
+ * NAND Flash device.
+ *
+ * start of the eye = max_prop_delay + tREA
+ * end of the eye = min_prop_delay + tRHOH + data_setup
+ */
+ tEYE = (int)min_prop_delay_in_ns + (int)target.tRHOH_in_ns +
+ (int)data_setup_in_ns;
+
+ tEYE -= (int)max_prop_delay_in_ns + (int)target.tREA_in_ns;
+
+ /*
+ * The eye must be open. If it's not, we can try to open it by
+ * increasing its main forcer, the data setup time.
+ *
+ * In each iteration of the following loop, we increase the data setup
+ * time by a single clock cycle. We do this until either the eye is
+ * open or we run into NFC limits.
+ */
+ while ((tEYE <= 0) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+ }
+
+ /*
+ * When control arrives here, the eye is open. The ideal time to sample
+ * the data is in the center of the eye:
+ *
+ * end of the eye + start of the eye
+ * --------------------------------- - data_setup
+ * 2
+ *
+ * After some algebra, this simplifies to the code immediately below.
+ */
+ ideal_sample_delay_in_ns =
+ ((int)max_prop_delay_in_ns +
+ (int)target.tREA_in_ns +
+ (int)min_prop_delay_in_ns +
+ (int)target.tRHOH_in_ns -
+ (int)data_setup_in_ns) >> 1;
+
+ /*
+ * The following figure illustrates some aspects of a NAND Flash read:
+ *
+ *
+ * __ _____________________________________
+ * RDN \_________________/
+ *
+ * <---- tEYE ----->
+ * /-----------------\
+ * Read Data ----------------------------< >---------
+ * \-----------------/
+ * ^ ^ ^ ^
+ * | | | |
+ * |<--Data Setup -->|<--Delay Time -->| |
+ * | | | |
+ * | | |
+ * | |<-- Quantized Delay Time -->|
+ * | | |
+ *
+ *
+ * We have some issues we must now address:
+ *
+ * (1) The *ideal* sample delay time must not be negative. If it is, we
+ * jam it to zero.
+ *
+ * (2) The *ideal* sample delay time must not be greater than that
+ * allowed by the NFC. If it is, we can increase the data setup
+ * time, which will reduce the delay between the end of the data
+ * setup and the center of the eye. It will also make the eye
+ * larger, which might help with the next issue...
+ *
+ * (3) The *quantized* sample delay time must not fall either before the
+ * eye opens or after it closes (the latter is the problem
+ * illustrated in the above figure).
+ */
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ /*
+ * Extend the data setup as needed to reduce the ideal sample delay
+ * below the maximum permitted by the NFC.
+ */
+ while ((ideal_sample_delay_in_ns > max_sample_delay_in_ns) &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+
+ /*
+ * Decrease the ideal sample delay by one half cycle, to keep it
+ * in the middle of the eye.
+ */
+ ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+ }
+
+ /*
+ * Compute the sample delay factor that corresponds to the ideal sample
+ * delay. If the result is too large, then use the maximum allowed
+ * value.
+ *
+ * Notice that we use the ns_to_cycles function to compute the sample
+ * delay factor. We do this because the form of the computation is the
+ * same as that for calculating cycles.
+ */
+ sample_delay_factor =
+ ns_to_cycles(ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+
+ /*
+ * These macros conveniently encapsulate a computation we'll use to
+ * continuously evaluate whether or not the data sample delay is inside
+ * the eye.
+ */
+ #define IDEAL_DELAY ((int) ideal_sample_delay_in_ns)
+
+ #define QUANTIZED_DELAY \
+ ((int) ((sample_delay_factor * clock_period_in_ns) >> \
+ dll_delay_shift))
+
+ #define DELAY_ERROR (abs(QUANTIZED_DELAY - IDEAL_DELAY))
+
+ #define SAMPLE_IS_NOT_WITHIN_THE_EYE (DELAY_ERROR > (tEYE >> 1))
+
+ /*
+ * While the quantized sample time falls outside the eye, reduce the
+ * sample delay or extend the data setup to move the sampling point back
+ * toward the eye. Do not allow the number of data setup cycles to
+ * exceed the maximum allowed by the NFC.
+ */
+ while (SAMPLE_IS_NOT_WITHIN_THE_EYE &&
+ (data_setup_in_cycles < nfc->max_data_setup_cycles)) {
+ /*
+ * If control arrives here, the quantized sample delay falls
+ * outside the eye. Check if it's before the eye opens, or after
+ * the eye closes.
+ */
+ if (QUANTIZED_DELAY > IDEAL_DELAY) {
+ /*
+ * If control arrives here, the quantized sample delay
+ * falls after the eye closes. Decrease the quantized
+ * delay time and then go back to re-evaluate.
+ */
+ if (sample_delay_factor != 0)
+ sample_delay_factor--;
+ continue;
+ }
+
+ /*
+ * If control arrives here, the quantized sample delay falls
+ * before the eye opens. Shift the sample point by increasing
+ * data setup time. This will also make the eye larger.
+ */
+
+ /* Give a cycle to data setup. */
+ data_setup_in_cycles++;
+ /* Synchronize the data setup time with the cycles. */
+ data_setup_in_ns += clock_period_in_ns;
+ /* Adjust tEYE accordingly. */
+ tEYE += clock_period_in_ns;
+
+ /*
+ * Decrease the ideal sample delay by one half cycle, to keep it
+ * in the middle of the eye.
+ */
+ ideal_sample_delay_in_ns -= (clock_period_in_ns >> 1);
+
+ /* ...and one less period for the delay time. */
+ ideal_sample_delay_in_ns -= clock_period_in_ns;
+
+ /* Jam a negative ideal sample delay to zero. */
+ if (ideal_sample_delay_in_ns < 0)
+ ideal_sample_delay_in_ns = 0;
+
+ /*
+ * We have a new ideal sample delay, so re-compute the quantized
+ * delay.
+ */
+ sample_delay_factor =
+ ns_to_cycles(
+ ideal_sample_delay_in_ns << dll_delay_shift,
+ clock_period_in_ns, 0);
+
+ if (sample_delay_factor > nfc->max_sample_delay_factor)
+ sample_delay_factor = nfc->max_sample_delay_factor;
+ }
+
+ /* Control arrives here when we're ready to return our results. */
+return_results:
+ hw->data_setup_in_cycles = data_setup_in_cycles;
+ hw->data_hold_in_cycles = data_hold_in_cycles;
+ hw->address_setup_in_cycles = address_setup_in_cycles;
+ hw->use_half_periods = dll_use_half_periods;
+ hw->sample_delay_factor = sample_delay_factor;
+ hw->device_busy_timeout = GPMI_DEFAULT_BUSY_TIMEOUT;
+ hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS;
+
+ /* Return success. */
+ return 0;
+}
+
+/*
+ * <1> Firstly, we should know what's the GPMI-clock means.
+ * The GPMI-clock is the internal clock in the gpmi nand controller.
+ * If you set 100MHz to gpmi nand controller, the GPMI-clock's period
+ * is 10ns. Mark the GPMI-clock's period as GPMI-clock-period.
+ *
+ * <2> Secondly, we should know what's the frequency on the nand chip pins.
+ * The frequency on the nand chip pins is derived from the GPMI-clock.
+ * We can get it from the following equation:
+ *
+ * F = G / (DS + DH)
+ *
+ * F : the frequency on the nand chip pins.
+ * G : the GPMI clock, such as 100MHz.
+ * DS : GPMI_HW_GPMI_TIMING0:DATA_SETUP
+ * DH : GPMI_HW_GPMI_TIMING0:DATA_HOLD
+ *
+ * <3> Thirdly, when the frequency on the nand chip pins is above 33MHz,
+ * the nand EDO(extended Data Out) timing could be applied.
+ * The GPMI implements a feedback read strobe to sample the read data.
+ * The feedback read strobe can be delayed to support the nand EDO timing
+ * where the read strobe may deasserts before the read data is valid, and
+ * read data is valid for some time after read strobe.
+ *
+ * The following figure illustrates some aspects of a NAND Flash read:
+ *
+ * |<---tREA---->|
+ * | |
+ * | | |
+ * |<--tRP-->| |
+ * | | |
+ * __ ___|__________________________________
+ * RDN \________/ |
+ * |
+ * /---------\
+ * Read Data --------------< >---------
+ * \---------/
+ * | |
+ * |<-D->|
+ * FeedbackRDN ________ ____________
+ * \___________/
+ *
+ * D stands for delay, set in the HW_GPMI_CTRL1:RDN_DELAY.
+ *
+ *
+ * <4> Now, we begin to describe how to compute the right RDN_DELAY.
+ *
+ * 4.1) From the aspect of the nand chip pins:
+ * Delay = (tREA + C - tRP) {1}
+ *
+ * tREA : the maximum read access time. From the ONFI nand standards,
+ * we know that tREA is 16ns in mode 5, tREA is 20ns is mode 4.
+ * Please check it in : www.onfi.org
+ * C : a constant for adjust the delay. default is 4.
+ * tRP : the read pulse width.
+ * Specified by the HW_GPMI_TIMING0:DATA_SETUP:
+ * tRP = (GPMI-clock-period) * DATA_SETUP
+ *
+ * 4.2) From the aspect of the GPMI nand controller:
+ * Delay = RDN_DELAY * 0.125 * RP {2}
+ *
+ * RP : the DLL reference period.
+ * if (GPMI-clock-period > DLL_THRETHOLD)
+ * RP = GPMI-clock-period / 2;
+ * else
+ * RP = GPMI-clock-period;
+ *
+ * Set the HW_GPMI_CTRL1:HALF_PERIOD if GPMI-clock-period
+ * is greater DLL_THRETHOLD. In other SOCs, the DLL_THRETHOLD
+ * is 16ns, but in mx6q, we use 12ns.
+ *
+ * 4.3) since {1} equals {2}, we get:
+ *
+ * (tREA + 4 - tRP) * 8
+ * RDN_DELAY = --------------------- {3}
+ * RP
+ *
+ * 4.4) We only support the fastest asynchronous mode of ONFI nand.
+ * For some ONFI nand, the mode 4 is the fastest mode;
+ * while for some ONFI nand, the mode 5 is the fastest mode.
+ * So we only support the mode 4 and mode 5. It is no need to
+ * support other modes.
+ */
+static void gpmi_compute_edo_timing(struct gpmi_nand_data *this,
+ struct gpmi_nfc_hardware_timing *hw)
+{
+ struct resources *r = &this->resources;
+ unsigned long rate = clk_get_rate(r->clock[0]);
+ int mode = this->timing_mode;
+ int dll_threshold = this->devdata->max_chain_delay;
+ unsigned long delay;
+ unsigned long clk_period;
+ int t_rea;
+ int c = 4;
+ int t_rp;
+ int rp;
+
+ /*
+ * [1] for GPMI_HW_GPMI_TIMING0:
+ * The async mode requires 40MHz for mode 4, 50MHz for mode 5.
+ * The GPMI can support 100MHz at most. So if we want to
+ * get the 40MHz or 50MHz, we have to set DS=1, DH=1.
+ * Set the ADDRESS_SETUP to 0 in mode 4.
+ */
+ hw->data_setup_in_cycles = 1;
+ hw->data_hold_in_cycles = 1;
+ hw->address_setup_in_cycles = ((mode == 5) ? 1 : 0);
+
+ /* [2] for GPMI_HW_GPMI_TIMING1 */
+ hw->device_busy_timeout = 0x9000;
+
+ /* [3] for GPMI_HW_GPMI_CTRL1 */
+ hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY;
+
+ /*
+ * Enlarge 10 times for the numerator and denominator in {3}.
+ * This make us to get more accurate result.
+ */
+ clk_period = NSEC_PER_SEC / (rate / 10);
+ dll_threshold *= 10;
+ t_rea = ((mode == 5) ? 16 : 20) * 10;
+ c *= 10;
+
+ t_rp = clk_period * 1; /* DATA_SETUP is 1 */
+
+ if (clk_period > dll_threshold) {
+ hw->use_half_periods = 1;
+ rp = clk_period / 2;
+ } else {
+ hw->use_half_periods = 0;
+ rp = clk_period;
+ }
+
+ /*
+ * Multiply the numerator with 10, we could do a round off:
+ * 7.8 round up to 8; 7.4 round down to 7.
+ */
+ delay = (((t_rea + c - t_rp) * 8) * 10) / rp;
+ delay = (delay + 5) / 10;
+
+ hw->sample_delay_factor = delay;
+}
+
+static int enable_edo_mode(struct gpmi_nand_data *this, int mode)
+{
+ struct resources *r = &this->resources;
+ struct nand_chip *nand = &this->nand;
+ struct mtd_info *mtd = &this->mtd;
+ uint8_t *feature;
+ unsigned long rate;
+ int ret;
+
+ feature = kzalloc(ONFI_SUBFEATURE_PARAM_LEN, GFP_KERNEL);
+ if (!feature)
+ return -ENOMEM;
+
+ nand->select_chip(mtd, 0);
+
+ /* [1] send SET FEATURE commond to NAND */
+ feature[0] = mode;
+ ret = nand->onfi_set_features(mtd, nand,
+ ONFI_FEATURE_ADDR_TIMING_MODE, feature);
+ if (ret)
+ goto err_out;
+
+ /* [2] send GET FEATURE command to double-check the timing mode */
+ memset(feature, 0, ONFI_SUBFEATURE_PARAM_LEN);
+ ret = nand->onfi_get_features(mtd, nand,
+ ONFI_FEATURE_ADDR_TIMING_MODE, feature);
+ if (ret || feature[0] != mode)
+ goto err_out;
+
+ nand->select_chip(mtd, -1);
+
+ /* [3] set the main IO clock, 100MHz for mode 5, 80MHz for mode 4. */
+ rate = (mode == 5) ? 100000000 : 80000000;
+ clk_set_rate(r->clock[0], rate);
+
+ /* Let the gpmi_begin() re-compute the timing again. */
+ this->flags &= ~GPMI_TIMING_INIT_OK;
+
+ this->flags |= GPMI_ASYNC_EDO_ENABLED;
+ this->timing_mode = mode;
+ kfree(feature);
+ dev_info(this->dev, "enable the asynchronous EDO mode %d\n", mode);
+ return 0;
+
+err_out:
+ nand->select_chip(mtd, -1);
+ kfree(feature);
+ dev_err(this->dev, "mode:%d ,failed in set feature.\n", mode);
+ return -EINVAL;
+}
+
+int gpmi_extra_init(struct gpmi_nand_data *this)
+{
+ struct nand_chip *chip = &this->nand;
+
+ /* Enable the asynchronous EDO feature. */
+ if (GPMI_IS_MX6(this) && chip->onfi_version) {
+ int mode = onfi_get_async_timing_mode(chip);
+
+ /* We only support the timing mode 4 and mode 5. */
+ if (mode & ONFI_TIMING_MODE_5)
+ mode = 5;
+ else if (mode & ONFI_TIMING_MODE_4)
+ mode = 4;
+ else
+ return 0;
+
+ return enable_edo_mode(this, mode);
+ }
+ return 0;
+}
+
+/* Begin the I/O */
+void gpmi_begin(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ void __iomem *gpmi_regs = r->gpmi_regs;
+ unsigned int clock_period_in_ns;
+ uint32_t reg;
+ unsigned int dll_wait_time_in_us;
+ struct gpmi_nfc_hardware_timing hw;
+ int ret;
+
+ /* Enable the clock. */
+ ret = gpmi_enable_clk(this);
+ if (ret) {
+ dev_err(this->dev, "We failed in enable the clk\n");
+ goto err_out;
+ }
+
+ /* Only initialize the timing once */
+ if (this->flags & GPMI_TIMING_INIT_OK)
+ return;
+ this->flags |= GPMI_TIMING_INIT_OK;
+
+ if (this->flags & GPMI_ASYNC_EDO_ENABLED)
+ gpmi_compute_edo_timing(this, &hw);
+ else
+ gpmi_nfc_compute_hardware_timing(this, &hw);
+
+ /* [1] Set HW_GPMI_TIMING0 */
+ reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) |
+ BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles) |
+ BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles);
+
+ writel(reg, gpmi_regs + HW_GPMI_TIMING0);
+
+ /* [2] Set HW_GPMI_TIMING1 */
+ writel(BF_GPMI_TIMING1_BUSY_TIMEOUT(hw.device_busy_timeout),
+ gpmi_regs + HW_GPMI_TIMING1);
+
+ /* [3] The following code is to set the HW_GPMI_CTRL1. */
+
+ /* Set the WRN_DLY_SEL */
+ writel(BM_GPMI_CTRL1_WRN_DLY_SEL, gpmi_regs + HW_GPMI_CTRL1_CLR);
+ writel(BF_GPMI_CTRL1_WRN_DLY_SEL(hw.wrn_dly_sel),
+ gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. */
+ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* Clear out the DLL control fields. */
+ reg = BM_GPMI_CTRL1_RDN_DELAY | BM_GPMI_CTRL1_HALF_PERIOD;
+ writel(reg, gpmi_regs + HW_GPMI_CTRL1_CLR);
+
+ /* If no sample delay is called for, return immediately. */
+ if (!hw.sample_delay_factor)
+ return;
+
+ /* Set RDN_DELAY or HALF_PERIOD. */
+ reg = ((hw.use_half_periods) ? BM_GPMI_CTRL1_HALF_PERIOD : 0)
+ | BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor);
+
+ writel(reg, gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /* At last, we enable the DLL. */
+ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET);
+
+ /*
+ * After we enable the GPMI DLL, we have to wait 64 clock cycles before
+ * we can use the GPMI. Calculate the amount of time we need to wait,
+ * in microseconds.
+ */
+ clock_period_in_ns = NSEC_PER_SEC / clk_get_rate(r->clock[0]);
+ dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000;
+
+ if (!dll_wait_time_in_us)
+ dll_wait_time_in_us = 1;
+
+ /* Wait for the DLL to settle. */
+ udelay(dll_wait_time_in_us);
+
+err_out:
+ return;
+}
+
+void gpmi_end(struct gpmi_nand_data *this)
+{
+ gpmi_disable_clk(this);
+}
+
+/* Clears a BCH interrupt. */
+void gpmi_clear_bch(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ writel(BM_BCH_CTRL_COMPLETE_IRQ, r->bch_regs + HW_BCH_CTRL_CLR);
+}
+
+/* Returns the Ready/Busy status of the given chip. */
+int gpmi_is_ready(struct gpmi_nand_data *this, unsigned chip)
+{
+ struct resources *r = &this->resources;
+ uint32_t mask = 0;
+ uint32_t reg = 0;
+
+ if (GPMI_IS_MX23(this)) {
+ mask = MX23_BM_GPMI_DEBUG_READY0 << chip;
+ reg = readl(r->gpmi_regs + HW_GPMI_DEBUG);
+ } else if (GPMI_IS_MX28(this) || GPMI_IS_MX6(this)) {
+ /*
+ * In the imx6, all the ready/busy pins are bound
+ * together. So we only need to check chip 0.
+ */
+ if (GPMI_IS_MX6(this))
+ chip = 0;
+
+ /* MX28 shares the same R/B register as MX6Q. */
+ mask = MX28_BF_GPMI_STAT_READY_BUSY(1 << chip);
+ reg = readl(r->gpmi_regs + HW_GPMI_STAT);
+ } else
+ dev_err(this->dev, "unknown arch.\n");
+ return reg & mask;
+}
+
+static inline void set_dma_type(struct gpmi_nand_data *this,
+ enum dma_ops_type type)
+{
+ this->last_dma_type = this->dma_type;
+ this->dma_type = type;
+}
+
+int gpmi_send_command(struct gpmi_nand_data *this)
+{
+ struct dma_chan *channel = get_dma_chan(this);
+ struct dma_async_tx_descriptor *desc;
+ struct scatterlist *sgl;
+ int chip = this->current_chip;
+ u32 pio[3];
+
+ /* [1] send out the PIO words */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__WRITE)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_CLE)
+ | BM_GPMI_CTRL0_ADDRESS_INCREMENT
+ | BF_GPMI_CTRL0_XFER_COUNT(this->command_length);
+ pio[1] = pio[2] = 0;
+ desc = dmaengine_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
+ if (!desc)
+ return -EINVAL;
+
+ /* [2] send out the COMMAND + ADDRESS string stored in @buffer */
+ sgl = &this->cmd_sgl;
+
+ sg_init_one(sgl, this->cmd_buffer, this->command_length);
+ dma_map_sg(this->dev, sgl, 1, DMA_TO_DEVICE);
+ desc = dmaengine_prep_slave_sg(channel,
+ sgl, 1, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ return -EINVAL;
+
+ /* [3] submit the DMA */
+ set_dma_type(this, DMA_FOR_COMMAND);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_data(struct gpmi_nand_data *this)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ uint32_t command_mode;
+ uint32_t address;
+ u32 pio[2];
+
+ /* [1] PIO */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ pio[1] = 0;
+ desc = dmaengine_prep_slave_sg(channel, (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
+ if (!desc)
+ return -EINVAL;
+
+ /* [2] send DMA request */
+ prepare_data_dma(this, DMA_TO_DEVICE);
+ desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
+ 1, DMA_MEM_TO_DEV,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ return -EINVAL;
+
+ /* [3] submit the DMA */
+ set_dma_type(this, DMA_FOR_WRITE_DATA);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_read_data(struct gpmi_nand_data *this)
+{
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[2];
+
+ /* [1] : send PIO */
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(BV_GPMI_CTRL0_COMMAND_MODE__READ)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(BV_GPMI_CTRL0_ADDRESS__NAND_DATA)
+ | BF_GPMI_CTRL0_XFER_COUNT(this->upper_len);
+ pio[1] = 0;
+ desc = dmaengine_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_TRANS_NONE, 0);
+ if (!desc)
+ return -EINVAL;
+
+ /* [2] : send DMA request */
+ prepare_data_dma(this, DMA_FROM_DEVICE);
+ desc = dmaengine_prep_slave_sg(channel, &this->data_sgl,
+ 1, DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ return -EINVAL;
+
+ /* [3] : submit the DMA */
+ set_dma_type(this, DMA_FOR_READ_DATA);
+ return start_dma_without_bch_irq(this, desc);
+}
+
+int gpmi_send_page(struct gpmi_nand_data *this,
+ dma_addr_t payload, dma_addr_t auxiliary)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ uint32_t command_mode;
+ uint32_t address;
+ uint32_t ecc_command;
+ uint32_t buffer_mask;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[6];
+
+ /* A DMA descriptor that does an ECC page read. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WRITE;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+ ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE;
+ buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE |
+ BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+ pio[3] = geo->page_size;
+ pio[4] = payload;
+ pio[5] = auxiliary;
+
+ desc = dmaengine_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_TRANS_NONE,
+ DMA_CTRL_ACK);
+ if (!desc)
+ return -EINVAL;
+
+ set_dma_type(this, DMA_FOR_WRITE_ECC_PAGE);
+ return start_dma_with_bch_irq(this, desc);
+}
+
+int gpmi_read_page(struct gpmi_nand_data *this,
+ dma_addr_t payload, dma_addr_t auxiliary)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ uint32_t command_mode;
+ uint32_t address;
+ uint32_t ecc_command;
+ uint32_t buffer_mask;
+ struct dma_async_tx_descriptor *desc;
+ struct dma_chan *channel = get_dma_chan(this);
+ int chip = this->current_chip;
+ u32 pio[6];
+
+ /* [1] Wait for the chip to report ready. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(0);
+ pio[1] = 0;
+ desc = dmaengine_prep_slave_sg(channel,
+ (struct scatterlist *)pio, 2,
+ DMA_TRANS_NONE, 0);
+ if (!desc)
+ return -EINVAL;
+
+ /* [2] Enable the BCH block and read. */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__READ;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+ ecc_command = BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE;
+ buffer_mask = BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE
+ | BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+
+ pio[1] = 0;
+ pio[2] = BM_GPMI_ECCCTRL_ENABLE_ECC
+ | BF_GPMI_ECCCTRL_ECC_CMD(ecc_command)
+ | BF_GPMI_ECCCTRL_BUFFER_MASK(buffer_mask);
+ pio[3] = geo->page_size;
+ pio[4] = payload;
+ pio[5] = auxiliary;
+ desc = dmaengine_prep_slave_sg(channel,
+ (struct scatterlist *)pio,
+ ARRAY_SIZE(pio), DMA_TRANS_NONE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ return -EINVAL;
+
+ /* [3] Disable the BCH block */
+ command_mode = BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY;
+ address = BV_GPMI_CTRL0_ADDRESS__NAND_DATA;
+
+ pio[0] = BF_GPMI_CTRL0_COMMAND_MODE(command_mode)
+ | BM_GPMI_CTRL0_WORD_LENGTH
+ | BF_GPMI_CTRL0_CS(chip, this)
+ | BF_GPMI_CTRL0_LOCK_CS(LOCK_CS_ENABLE, this)
+ | BF_GPMI_CTRL0_ADDRESS(address)
+ | BF_GPMI_CTRL0_XFER_COUNT(geo->page_size);
+ pio[1] = 0;
+ pio[2] = 0; /* clear GPMI_HW_GPMI_ECCCTRL, disable the BCH. */
+ desc = dmaengine_prep_slave_sg(channel,
+ (struct scatterlist *)pio, 3,
+ DMA_TRANS_NONE,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!desc)
+ return -EINVAL;
+
+ /* [4] submit the DMA */
+ set_dma_type(this, DMA_FOR_READ_ECC_PAGE);
+ return start_dma_with_bch_irq(this, desc);
+}
+
+/**
+ * gpmi_copy_bits - copy bits from one memory region to another
+ * @dst: destination buffer
+ * @dst_bit_off: bit offset we're starting to write at
+ * @src: source buffer
+ * @src_bit_off: bit offset we're starting to read from
+ * @nbits: number of bits to copy
+ *
+ * This functions copies bits from one memory region to another, and is used by
+ * the GPMI driver to copy ECC sections which are not guaranteed to be byte
+ * aligned.
+ *
+ * src and dst should not overlap.
+ *
+ */
+void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
+ const u8 *src, size_t src_bit_off,
+ size_t nbits)
+{
+ size_t i;
+ size_t nbytes;
+ u32 src_buffer = 0;
+ size_t bits_in_src_buffer = 0;
+
+ if (!nbits)
+ return;
+
+ /*
+ * Move src and dst pointers to the closest byte pointer and store bit
+ * offsets within a byte.
+ */
+ src += src_bit_off / 8;
+ src_bit_off %= 8;
+
+ dst += dst_bit_off / 8;
+ dst_bit_off %= 8;
+
+ /*
+ * Initialize the src_buffer value with bits available in the first
+ * byte of data so that we end up with a byte aligned src pointer.
+ */
+ if (src_bit_off) {
+ src_buffer = src[0] >> src_bit_off;
+ if (nbits >= (8 - src_bit_off)) {
+ bits_in_src_buffer += 8 - src_bit_off;
+ } else {
+ src_buffer &= GENMASK(nbits - 1, 0);
+ bits_in_src_buffer += nbits;
+ }
+ nbits -= bits_in_src_buffer;
+ src++;
+ }
+
+ /* Calculate the number of bytes that can be copied from src to dst. */
+ nbytes = nbits / 8;
+
+ /* Try to align dst to a byte boundary. */
+ if (dst_bit_off) {
+ if (bits_in_src_buffer < (8 - dst_bit_off) && nbytes) {
+ src_buffer |= src[0] << bits_in_src_buffer;
+ bits_in_src_buffer += 8;
+ src++;
+ nbytes--;
+ }
+
+ if (bits_in_src_buffer >= (8 - dst_bit_off)) {
+ dst[0] &= GENMASK(dst_bit_off - 1, 0);
+ dst[0] |= src_buffer << dst_bit_off;
+ src_buffer >>= (8 - dst_bit_off);
+ bits_in_src_buffer -= (8 - dst_bit_off);
+ dst_bit_off = 0;
+ dst++;
+ if (bits_in_src_buffer > 7) {
+ bits_in_src_buffer -= 8;
+ dst[0] = src_buffer;
+ dst++;
+ src_buffer >>= 8;
+ }
+ }
+ }
+
+ if (!bits_in_src_buffer && !dst_bit_off) {
+ /*
+ * Both src and dst pointers are byte aligned, thus we can
+ * just use the optimized memcpy function.
+ */
+ if (nbytes)
+ memcpy(dst, src, nbytes);
+ } else {
+ /*
+ * src buffer is not byte aligned, hence we have to copy each
+ * src byte to the src_buffer variable before extracting a byte
+ * to store in dst.
+ */
+ for (i = 0; i < nbytes; i++) {
+ src_buffer |= src[i] << bits_in_src_buffer;
+ dst[i] = src_buffer;
+ src_buffer >>= 8;
+ }
+ }
+ /* Update dst and src pointers */
+ dst += nbytes;
+ src += nbytes;
+
+ /*
+ * nbits is the number of remaining bits. It should not exceed 8 as
+ * we've already copied as much bytes as possible.
+ */
+ nbits %= 8;
+
+ /*
+ * If there's no more bits to copy to the destination and src buffer
+ * was already byte aligned, then we're done.
+ */
+ if (!nbits && !bits_in_src_buffer)
+ return;
+
+ /* Copy the remaining bits to src_buffer */
+ if (nbits)
+ src_buffer |= (*src & GENMASK(nbits - 1, 0)) <<
+ bits_in_src_buffer;
+ bits_in_src_buffer += nbits;
+
+ /*
+ * In case there were not enough bits to get a byte aligned dst buffer
+ * prepare the src_buffer variable to match the dst organization (shift
+ * src_buffer by dst_bit_off and retrieve the least significant bits
+ * from dst).
+ */
+ if (dst_bit_off)
+ src_buffer = (src_buffer << dst_bit_off) |
+ (*dst & GENMASK(dst_bit_off - 1, 0));
+ bits_in_src_buffer += dst_bit_off;
+
+ /*
+ * Keep most significant bits from dst if we end up with an unaligned
+ * number of bits.
+ */
+ nbytes = bits_in_src_buffer / 8;
+ if (bits_in_src_buffer % 8) {
+ src_buffer |= (dst[nbytes] &
+ GENMASK(7, bits_in_src_buffer % 8)) <<
+ (nbytes * 8);
+ nbytes++;
+ }
+
+ /* Copy the remaining bytes to dst */
+ for (i = 0; i < nbytes; i++) {
+ dst[i] = src_buffer;
+ src_buffer >>= 8;
+ }
+}
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
new file mode 100644
index 0000000..2064ada
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c
@@ -0,0 +1,2051 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
+#include "gpmi-nand.h"
+#include "bch-regs.h"
+
+/* Resource names for the GPMI NAND driver. */
+#define GPMI_NAND_GPMI_REGS_ADDR_RES_NAME "gpmi-nand"
+#define GPMI_NAND_BCH_REGS_ADDR_RES_NAME "bch"
+#define GPMI_NAND_BCH_INTERRUPT_RES_NAME "bch"
+
+/* add our owner bbt descriptor */
+static uint8_t scan_ff_pattern[] = { 0xff };
+static struct nand_bbt_descr gpmi_bbt_descr = {
+ .options = 0,
+ .offs = 0,
+ .len = 1,
+ .pattern = scan_ff_pattern
+};
+
+/*
+ * We may change the layout if we can get the ECC info from the datasheet,
+ * else we will use all the (page + OOB).
+ */
+static struct nand_ecclayout gpmi_hw_ecclayout = {
+ .eccbytes = 0,
+ .eccpos = { 0, },
+ .oobfree = { {.offset = 0, .length = 0} }
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx23 = {
+ .type = IS_MX23,
+ .bch_max_ecc_strength = 20,
+ .max_chain_delay = 16,
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx28 = {
+ .type = IS_MX28,
+ .bch_max_ecc_strength = 20,
+ .max_chain_delay = 16,
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx6q = {
+ .type = IS_MX6Q,
+ .bch_max_ecc_strength = 40,
+ .max_chain_delay = 12,
+};
+
+static const struct gpmi_devdata gpmi_devdata_imx6sx = {
+ .type = IS_MX6SX,
+ .bch_max_ecc_strength = 62,
+ .max_chain_delay = 12,
+};
+
+static irqreturn_t bch_irq(int irq, void *cookie)
+{
+ struct gpmi_nand_data *this = cookie;
+
+ gpmi_clear_bch(this);
+ complete(&this->bch_done);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Calculate the ECC strength by hand:
+ * E : The ECC strength.
+ * G : the length of Galois Field.
+ * N : The chunk count of per page.
+ * O : the oobsize of the NAND chip.
+ * M : the metasize of per page.
+ *
+ * The formula is :
+ * E * G * N
+ * ------------ <= (O - M)
+ * 8
+ *
+ * So, we get E by:
+ * (O - M) * 8
+ * E <= -------------
+ * G * N
+ */
+static inline int get_ecc_strength(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ int ecc_strength;
+
+ ecc_strength = ((mtd->oobsize - geo->metadata_size) * 8)
+ / (geo->gf_len * geo->ecc_chunk_count);
+
+ /* We need the minor even number. */
+ return round_down(ecc_strength, 2);
+}
+
+static inline bool gpmi_check_ecc(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+
+ /* Do the sanity check. */
+ if (GPMI_IS_MX23(this) || GPMI_IS_MX28(this)) {
+ /* The mx23/mx28 only support the GF13. */
+ if (geo->gf_len == 14)
+ return false;
+ }
+ return geo->ecc_strength <= this->devdata->bch_max_ecc_strength;
+}
+
+/*
+ * If we can get the ECC information from the nand chip, we do not
+ * need to calculate them ourselves.
+ *
+ * We may have available oob space in this case.
+ */
+static bool set_geometry_by_ecc_info(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_oobfree *of = gpmi_hw_ecclayout.oobfree;
+ unsigned int block_mark_bit_offset;
+
+ if (!(chip->ecc_strength_ds > 0 && chip->ecc_step_ds > 0))
+ return false;
+
+ switch (chip->ecc_step_ds) {
+ case SZ_512:
+ geo->gf_len = 13;
+ break;
+ case SZ_1K:
+ geo->gf_len = 14;
+ break;
+ default:
+ dev_err(this->dev,
+ "unsupported nand chip. ecc bits : %d, ecc size : %d\n",
+ chip->ecc_strength_ds, chip->ecc_step_ds);
+ return false;
+ }
+ geo->ecc_chunk_size = chip->ecc_step_ds;
+ geo->ecc_strength = round_up(chip->ecc_strength_ds, 2);
+ if (!gpmi_check_ecc(this))
+ return false;
+
+ /* Keep the C >= O */
+ if (geo->ecc_chunk_size < mtd->oobsize) {
+ dev_err(this->dev,
+ "unsupported nand chip. ecc size: %d, oob size : %d\n",
+ chip->ecc_step_ds, mtd->oobsize);
+ return false;
+ }
+
+ /* The default value, see comment in the legacy_set_geometry(). */
+ geo->metadata_size = 10;
+
+ geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size;
+
+ /*
+ * Now, the NAND chip with 2K page(data chunk is 512byte) shows below:
+ *
+ * | P |
+ * |<----------------------------------------------------->|
+ * | |
+ * | (Block Mark) |
+ * | P' | | | |
+ * |<-------------------------------------------->| D | | O' |
+ * | |<---->| |<--->|
+ * V V V V V
+ * +---+----------+-+----------+-+----------+-+----------+-+-----+
+ * | M | data |E| data |E| data |E| data |E| |
+ * +---+----------+-+----------+-+----------+-+----------+-+-----+
+ * ^ ^
+ * | O |
+ * |<------------>|
+ * | |
+ *
+ * P : the page size for BCH module.
+ * E : The ECC strength.
+ * G : the length of Galois Field.
+ * N : The chunk count of per page.
+ * M : the metasize of per page.
+ * C : the ecc chunk size, aka the "data" above.
+ * P': the nand chip's page size.
+ * O : the nand chip's oob size.
+ * O': the free oob.
+ *
+ * The formula for P is :
+ *
+ * E * G * N
+ * P = ------------ + P' + M
+ * 8
+ *
+ * The position of block mark moves forward in the ECC-based view
+ * of page, and the delta is:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M)
+ * 8
+ *
+ * Please see the comment in legacy_set_geometry().
+ * With the condition C >= O , we still can get same result.
+ * So the bit position of the physical block mark within the ECC-based
+ * view of the page is :
+ * (P' - D) * 8
+ */
+ geo->page_size = mtd->writesize + geo->metadata_size +
+ (geo->gf_len * geo->ecc_strength * geo->ecc_chunk_count) / 8;
+
+ /* The available oob size we have. */
+ if (geo->page_size < mtd->writesize + mtd->oobsize) {
+ of->offset = geo->page_size - mtd->writesize;
+ of->length = mtd->oobsize - of->offset;
+ }
+
+ geo->payload_size = mtd->writesize;
+
+ geo->auxiliary_status_offset = ALIGN(geo->metadata_size, 4);
+ geo->auxiliary_size = ALIGN(geo->metadata_size, 4)
+ + ALIGN(geo->ecc_chunk_count, 4);
+
+ if (!this->swap_block_mark)
+ return true;
+
+ /* For bit swap. */
+ block_mark_bit_offset = mtd->writesize * 8 -
+ (geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1)
+ + geo->metadata_size * 8);
+
+ geo->block_mark_byte_offset = block_mark_bit_offset / 8;
+ geo->block_mark_bit_offset = block_mark_bit_offset % 8;
+ return true;
+}
+
+static int legacy_set_geometry(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ unsigned int metadata_size;
+ unsigned int status_size;
+ unsigned int block_mark_bit_offset;
+
+ /*
+ * The size of the metadata can be changed, though we set it to 10
+ * bytes now. But it can't be too large, because we have to save
+ * enough space for BCH.
+ */
+ geo->metadata_size = 10;
+
+ /* The default for the length of Galois Field. */
+ geo->gf_len = 13;
+
+ /* The default for chunk size. */
+ geo->ecc_chunk_size = 512;
+ while (geo->ecc_chunk_size < mtd->oobsize) {
+ geo->ecc_chunk_size *= 2; /* keep C >= O */
+ geo->gf_len = 14;
+ }
+
+ geo->ecc_chunk_count = mtd->writesize / geo->ecc_chunk_size;
+
+ /* We use the same ECC strength for all chunks. */
+ geo->ecc_strength = get_ecc_strength(this);
+ if (!gpmi_check_ecc(this)) {
+ dev_err(this->dev,
+ "required ecc strength of the NAND chip: %d is not supported by the GPMI controller (%d)\n",
+ geo->ecc_strength,
+ this->devdata->bch_max_ecc_strength);
+ return -EINVAL;
+ }
+
+ geo->page_size = mtd->writesize + mtd->oobsize;
+ geo->payload_size = mtd->writesize;
+
+ /*
+ * The auxiliary buffer contains the metadata and the ECC status. The
+ * metadata is padded to the nearest 32-bit boundary. The ECC status
+ * contains one byte for every ECC chunk, and is also padded to the
+ * nearest 32-bit boundary.
+ */
+ metadata_size = ALIGN(geo->metadata_size, 4);
+ status_size = ALIGN(geo->ecc_chunk_count, 4);
+
+ geo->auxiliary_size = metadata_size + status_size;
+ geo->auxiliary_status_offset = metadata_size;
+
+ if (!this->swap_block_mark)
+ return 0;
+
+ /*
+ * We need to compute the byte and bit offsets of
+ * the physical block mark within the ECC-based view of the page.
+ *
+ * NAND chip with 2K page shows below:
+ * (Block Mark)
+ * | |
+ * | D |
+ * |<---->|
+ * V V
+ * +---+----------+-+----------+-+----------+-+----------+-+
+ * | M | data |E| data |E| data |E| data |E|
+ * +---+----------+-+----------+-+----------+-+----------+-+
+ *
+ * The position of block mark moves forward in the ECC-based view
+ * of page, and the delta is:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M)
+ * 8
+ *
+ * With the formula to compute the ECC strength, and the condition
+ * : C >= O (C is the ecc chunk size)
+ *
+ * It's easy to deduce to the following result:
+ *
+ * E * G (O - M) C - M C - M
+ * ----------- <= ------- <= -------- < ---------
+ * 8 N N (N - 1)
+ *
+ * So, we get:
+ *
+ * E * G * (N - 1)
+ * D = (---------------- + M) < C
+ * 8
+ *
+ * The above inequality means the position of block mark
+ * within the ECC-based view of the page is still in the data chunk,
+ * and it's NOT in the ECC bits of the chunk.
+ *
+ * Use the following to compute the bit position of the
+ * physical block mark within the ECC-based view of the page:
+ * (page_size - D) * 8
+ *
+ * --Huang Shijie
+ */
+ block_mark_bit_offset = mtd->writesize * 8 -
+ (geo->ecc_strength * geo->gf_len * (geo->ecc_chunk_count - 1)
+ + geo->metadata_size * 8);
+
+ geo->block_mark_byte_offset = block_mark_bit_offset / 8;
+ geo->block_mark_bit_offset = block_mark_bit_offset % 8;
+ return 0;
+}
+
+int common_nfc_set_geometry(struct gpmi_nand_data *this)
+{
+ if (of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc")
+ && set_geometry_by_ecc_info(this))
+ return 0;
+ return legacy_set_geometry(this);
+}
+
+struct dma_chan *get_dma_chan(struct gpmi_nand_data *this)
+{
+ /* We use the DMA channel 0 to access all the nand chips. */
+ return this->dma_chans[0];
+}
+
+/* Can we use the upper's buffer directly for DMA? */
+void prepare_data_dma(struct gpmi_nand_data *this, enum dma_data_direction dr)
+{
+ struct scatterlist *sgl = &this->data_sgl;
+ int ret;
+
+ /* first try to map the upper buffer directly */
+ if (virt_addr_valid(this->upper_buf) &&
+ !object_is_on_stack(this->upper_buf)) {
+ sg_init_one(sgl, this->upper_buf, this->upper_len);
+ ret = dma_map_sg(this->dev, sgl, 1, dr);
+ if (ret == 0)
+ goto map_fail;
+
+ this->direct_dma_map_ok = true;
+ return;
+ }
+
+map_fail:
+ /* We have to use our own DMA buffer. */
+ sg_init_one(sgl, this->data_buffer_dma, this->upper_len);
+
+ if (dr == DMA_TO_DEVICE)
+ memcpy(this->data_buffer_dma, this->upper_buf, this->upper_len);
+
+ dma_map_sg(this->dev, sgl, 1, dr);
+
+ this->direct_dma_map_ok = false;
+}
+
+/* This will be called after the DMA operation is finished. */
+static void dma_irq_callback(void *param)
+{
+ struct gpmi_nand_data *this = param;
+ struct completion *dma_c = &this->dma_done;
+
+ switch (this->dma_type) {
+ case DMA_FOR_COMMAND:
+ dma_unmap_sg(this->dev, &this->cmd_sgl, 1, DMA_TO_DEVICE);
+ break;
+
+ case DMA_FOR_READ_DATA:
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_FROM_DEVICE);
+ if (this->direct_dma_map_ok == false)
+ memcpy(this->upper_buf, this->data_buffer_dma,
+ this->upper_len);
+ break;
+
+ case DMA_FOR_WRITE_DATA:
+ dma_unmap_sg(this->dev, &this->data_sgl, 1, DMA_TO_DEVICE);
+ break;
+
+ case DMA_FOR_READ_ECC_PAGE:
+ case DMA_FOR_WRITE_ECC_PAGE:
+ /* We have to wait the BCH interrupt to finish. */
+ break;
+
+ default:
+ dev_err(this->dev, "in wrong DMA operation.\n");
+ }
+
+ complete(dma_c);
+}
+
+int start_dma_without_bch_irq(struct gpmi_nand_data *this,
+ struct dma_async_tx_descriptor *desc)
+{
+ struct completion *dma_c = &this->dma_done;
+ unsigned long timeout;
+
+ init_completion(dma_c);
+
+ desc->callback = dma_irq_callback;
+ desc->callback_param = this;
+ dmaengine_submit(desc);
+ dma_async_issue_pending(get_dma_chan(this));
+
+ /* Wait for the interrupt from the DMA block. */
+ timeout = wait_for_completion_timeout(dma_c, msecs_to_jiffies(1000));
+ if (!timeout) {
+ dev_err(this->dev, "DMA timeout, last DMA :%d\n",
+ this->last_dma_type);
+ gpmi_dump_info(this);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+/*
+ * This function is used in BCH reading or BCH writing pages.
+ * It will wait for the BCH interrupt as long as ONE second.
+ * Actually, we must wait for two interrupts :
+ * [1] firstly the DMA interrupt and
+ * [2] secondly the BCH interrupt.
+ */
+int start_dma_with_bch_irq(struct gpmi_nand_data *this,
+ struct dma_async_tx_descriptor *desc)
+{
+ struct completion *bch_c = &this->bch_done;
+ unsigned long timeout;
+
+ /* Prepare to receive an interrupt from the BCH block. */
+ init_completion(bch_c);
+
+ /* start the DMA */
+ start_dma_without_bch_irq(this, desc);
+
+ /* Wait for the interrupt from the BCH block. */
+ timeout = wait_for_completion_timeout(bch_c, msecs_to_jiffies(1000));
+ if (!timeout) {
+ dev_err(this->dev, "BCH timeout, last DMA :%d\n",
+ this->last_dma_type);
+ gpmi_dump_info(this);
+ return -ETIMEDOUT;
+ }
+ return 0;
+}
+
+static int acquire_register_block(struct gpmi_nand_data *this,
+ const char *res_name)
+{
+ struct platform_device *pdev = this->pdev;
+ struct resources *res = &this->resources;
+ struct resource *r;
+ void __iomem *p;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name);
+ p = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(p))
+ return PTR_ERR(p);
+
+ if (!strcmp(res_name, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME))
+ res->gpmi_regs = p;
+ else if (!strcmp(res_name, GPMI_NAND_BCH_REGS_ADDR_RES_NAME))
+ res->bch_regs = p;
+ else
+ dev_err(this->dev, "unknown resource name : %s\n", res_name);
+
+ return 0;
+}
+
+static int acquire_bch_irq(struct gpmi_nand_data *this, irq_handler_t irq_h)
+{
+ struct platform_device *pdev = this->pdev;
+ const char *res_name = GPMI_NAND_BCH_INTERRUPT_RES_NAME;
+ struct resource *r;
+ int err;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, res_name);
+ if (!r) {
+ dev_err(this->dev, "Can't get resource for %s\n", res_name);
+ return -ENODEV;
+ }
+
+ err = devm_request_irq(this->dev, r->start, irq_h, 0, res_name, this);
+ if (err)
+ dev_err(this->dev, "error requesting BCH IRQ\n");
+
+ return err;
+}
+
+static void release_dma_channels(struct gpmi_nand_data *this)
+{
+ unsigned int i;
+ for (i = 0; i < DMA_CHANS; i++)
+ if (this->dma_chans[i]) {
+ dma_release_channel(this->dma_chans[i]);
+ this->dma_chans[i] = NULL;
+ }
+}
+
+static int acquire_dma_channels(struct gpmi_nand_data *this)
+{
+ struct platform_device *pdev = this->pdev;
+ struct dma_chan *dma_chan;
+
+ /* request dma channel */
+ dma_chan = dma_request_slave_channel(&pdev->dev, "rx-tx");
+ if (!dma_chan) {
+ dev_err(this->dev, "Failed to request DMA channel.\n");
+ goto acquire_err;
+ }
+
+ this->dma_chans[0] = dma_chan;
+ return 0;
+
+acquire_err:
+ release_dma_channels(this);
+ return -EINVAL;
+}
+
+static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = {
+ "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch",
+};
+
+static int gpmi_get_clks(struct gpmi_nand_data *this)
+{
+ struct resources *r = &this->resources;
+ char **extra_clks = NULL;
+ struct clk *clk;
+ int err, i;
+
+ /* The main clock is stored in the first. */
+ r->clock[0] = devm_clk_get(this->dev, "gpmi_io");
+ if (IS_ERR(r->clock[0])) {
+ err = PTR_ERR(r->clock[0]);
+ goto err_clock;
+ }
+
+ /* Get extra clocks */
+ if (GPMI_IS_MX6(this))
+ extra_clks = extra_clks_for_mx6q;
+ if (!extra_clks)
+ return 0;
+
+ for (i = 1; i < GPMI_CLK_MAX; i++) {
+ if (extra_clks[i - 1] == NULL)
+ break;
+
+ clk = devm_clk_get(this->dev, extra_clks[i - 1]);
+ if (IS_ERR(clk)) {
+ err = PTR_ERR(clk);
+ goto err_clock;
+ }
+
+ r->clock[i] = clk;
+ }
+
+ if (GPMI_IS_MX6(this))
+ /*
+ * Set the default value for the gpmi clock.
+ *
+ * If you want to use the ONFI nand which is in the
+ * Synchronous Mode, you should change the clock as you need.
+ */
+ clk_set_rate(r->clock[0], 22000000);
+
+ return 0;
+
+err_clock:
+ dev_dbg(this->dev, "failed in finding the clocks.\n");
+ return err;
+}
+
+static int acquire_resources(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ ret = acquire_register_block(this, GPMI_NAND_GPMI_REGS_ADDR_RES_NAME);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_register_block(this, GPMI_NAND_BCH_REGS_ADDR_RES_NAME);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_bch_irq(this, bch_irq);
+ if (ret)
+ goto exit_regs;
+
+ ret = acquire_dma_channels(this);
+ if (ret)
+ goto exit_regs;
+
+ ret = gpmi_get_clks(this);
+ if (ret)
+ goto exit_clock;
+ return 0;
+
+exit_clock:
+ release_dma_channels(this);
+exit_regs:
+ return ret;
+}
+
+static void release_resources(struct gpmi_nand_data *this)
+{
+ release_dma_channels(this);
+}
+
+static int init_hardware(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /*
+ * This structure contains the "safe" GPMI timing that should succeed
+ * with any NAND Flash device
+ * (although, with less-than-optimal performance).
+ */
+ struct nand_timing safe_timing = {
+ .data_setup_in_ns = 80,
+ .data_hold_in_ns = 60,
+ .address_setup_in_ns = 25,
+ .gpmi_sample_delay_in_ns = 6,
+ .tREA_in_ns = -1,
+ .tRLOH_in_ns = -1,
+ .tRHOH_in_ns = -1,
+ };
+
+ /* Initialize the hardwares. */
+ ret = gpmi_init(this);
+ if (ret)
+ return ret;
+
+ this->timing = safe_timing;
+ return 0;
+}
+
+static int read_page_prepare(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void **use_virt, dma_addr_t *use_phys)
+{
+ struct device *dev = this->dev;
+
+ if (virt_addr_valid(destination)) {
+ dma_addr_t dest_phys;
+
+ dest_phys = dma_map_single(dev, destination,
+ length, DMA_FROM_DEVICE);
+ if (dma_mapping_error(dev, dest_phys)) {
+ if (alt_size < length) {
+ dev_err(dev, "Alternate buffer is too small\n");
+ return -ENOMEM;
+ }
+ goto map_failed;
+ }
+ *use_virt = destination;
+ *use_phys = dest_phys;
+ this->direct_dma_map_ok = true;
+ return 0;
+ }
+
+map_failed:
+ *use_virt = alt_virt;
+ *use_phys = alt_phys;
+ this->direct_dma_map_ok = false;
+ return 0;
+}
+
+static inline void read_page_end(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void *used_virt, dma_addr_t used_phys)
+{
+ if (this->direct_dma_map_ok)
+ dma_unmap_single(this->dev, used_phys, length, DMA_FROM_DEVICE);
+}
+
+static inline void read_page_swap_end(struct gpmi_nand_data *this,
+ void *destination, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ void *used_virt, dma_addr_t used_phys)
+{
+ if (!this->direct_dma_map_ok)
+ memcpy(destination, alt_virt, length);
+}
+
+static int send_page_prepare(struct gpmi_nand_data *this,
+ const void *source, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ const void **use_virt, dma_addr_t *use_phys)
+{
+ struct device *dev = this->dev;
+
+ if (virt_addr_valid(source)) {
+ dma_addr_t source_phys;
+
+ source_phys = dma_map_single(dev, (void *)source, length,
+ DMA_TO_DEVICE);
+ if (dma_mapping_error(dev, source_phys)) {
+ if (alt_size < length) {
+ dev_err(dev, "Alternate buffer is too small\n");
+ return -ENOMEM;
+ }
+ goto map_failed;
+ }
+ *use_virt = source;
+ *use_phys = source_phys;
+ return 0;
+ }
+map_failed:
+ /*
+ * Copy the content of the source buffer into the alternate
+ * buffer and set up the return values accordingly.
+ */
+ memcpy(alt_virt, source, length);
+
+ *use_virt = alt_virt;
+ *use_phys = alt_phys;
+ return 0;
+}
+
+static void send_page_end(struct gpmi_nand_data *this,
+ const void *source, unsigned length,
+ void *alt_virt, dma_addr_t alt_phys, unsigned alt_size,
+ const void *used_virt, dma_addr_t used_phys)
+{
+ struct device *dev = this->dev;
+ if (used_virt == source)
+ dma_unmap_single(dev, used_phys, length, DMA_TO_DEVICE);
+}
+
+static void gpmi_free_dma_buffer(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+
+ if (this->page_buffer_virt && virt_addr_valid(this->page_buffer_virt))
+ dma_free_coherent(dev, this->page_buffer_size,
+ this->page_buffer_virt,
+ this->page_buffer_phys);
+ kfree(this->cmd_buffer);
+ kfree(this->data_buffer_dma);
+ kfree(this->raw_buffer);
+
+ this->cmd_buffer = NULL;
+ this->data_buffer_dma = NULL;
+ this->page_buffer_virt = NULL;
+ this->page_buffer_size = 0;
+}
+
+/* Allocate the DMA buffers */
+static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this)
+{
+ struct bch_geometry *geo = &this->bch_geometry;
+ struct device *dev = this->dev;
+ struct mtd_info *mtd = &this->mtd;
+
+ /* [1] Allocate a command buffer. PAGE_SIZE is enough. */
+ this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL);
+ if (this->cmd_buffer == NULL)
+ goto error_alloc;
+
+ /*
+ * [2] Allocate a read/write data buffer.
+ * The gpmi_alloc_dma_buffer can be called twice.
+ * We allocate a PAGE_SIZE length buffer if gpmi_alloc_dma_buffer
+ * is called before the nand_scan_ident; and we allocate a buffer
+ * of the real NAND page size when the gpmi_alloc_dma_buffer is
+ * called after the nand_scan_ident.
+ */
+ this->data_buffer_dma = kzalloc(mtd->writesize ?: PAGE_SIZE,
+ GFP_DMA | GFP_KERNEL);
+ if (this->data_buffer_dma == NULL)
+ goto error_alloc;
+
+ /*
+ * [3] Allocate the page buffer.
+ *
+ * Both the payload buffer and the auxiliary buffer must appear on
+ * 32-bit boundaries. We presume the size of the payload buffer is a
+ * power of two and is much larger than four, which guarantees the
+ * auxiliary buffer will appear on a 32-bit boundary.
+ */
+ this->page_buffer_size = geo->payload_size + geo->auxiliary_size;
+ this->page_buffer_virt = dma_alloc_coherent(dev, this->page_buffer_size,
+ &this->page_buffer_phys, GFP_DMA);
+ if (!this->page_buffer_virt)
+ goto error_alloc;
+
+ this->raw_buffer = kzalloc(mtd->writesize + mtd->oobsize, GFP_KERNEL);
+ if (!this->raw_buffer)
+ goto error_alloc;
+
+ /* Slice up the page buffer. */
+ this->payload_virt = this->page_buffer_virt;
+ this->payload_phys = this->page_buffer_phys;
+ this->auxiliary_virt = this->payload_virt + geo->payload_size;
+ this->auxiliary_phys = this->payload_phys + geo->payload_size;
+ return 0;
+
+error_alloc:
+ gpmi_free_dma_buffer(this);
+ return -ENOMEM;
+}
+
+static void gpmi_cmd_ctrl(struct mtd_info *mtd, int data, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int ret;
+
+ /*
+ * Every operation begins with a command byte and a series of zero or
+ * more address bytes. These are distinguished by either the Address
+ * Latch Enable (ALE) or Command Latch Enable (CLE) signals being
+ * asserted. When MTD is ready to execute the command, it will deassert
+ * both latch enables.
+ *
+ * Rather than run a separate DMA operation for every single byte, we
+ * queue them up and run a single DMA operation for the entire series
+ * of command and data bytes. NAND_CMD_NONE means the END of the queue.
+ */
+ if ((ctrl & (NAND_ALE | NAND_CLE))) {
+ if (data != NAND_CMD_NONE)
+ this->cmd_buffer[this->command_length++] = data;
+ return;
+ }
+
+ if (!this->command_length)
+ return;
+
+ ret = gpmi_send_command(this);
+ if (ret)
+ dev_err(this->dev, "Chip: %u, Error %d\n",
+ this->current_chip, ret);
+
+ this->command_length = 0;
+}
+
+static int gpmi_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ return gpmi_is_ready(this, this->current_chip);
+}
+
+static void gpmi_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ if ((this->current_chip < 0) && (chipnr >= 0))
+ gpmi_begin(this);
+ else if ((this->current_chip >= 0) && (chipnr < 0))
+ gpmi_end(this);
+
+ this->current_chip = chipnr;
+}
+
+static void gpmi_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ dev_dbg(this->dev, "len is %d\n", len);
+ this->upper_buf = buf;
+ this->upper_len = len;
+
+ gpmi_read_data(this);
+}
+
+static void gpmi_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+
+ dev_dbg(this->dev, "len is %d\n", len);
+ this->upper_buf = (uint8_t *)buf;
+ this->upper_len = len;
+
+ gpmi_send_data(this);
+}
+
+static uint8_t gpmi_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ uint8_t *buf = this->data_buffer_dma;
+
+ gpmi_read_buf(mtd, buf, 1);
+ return buf[0];
+}
+
+/*
+ * Handles block mark swapping.
+ * It can be called in swapping the block mark, or swapping it back,
+ * because the the operations are the same.
+ */
+static void block_mark_swapping(struct gpmi_nand_data *this,
+ void *payload, void *auxiliary)
+{
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ unsigned char *p;
+ unsigned char *a;
+ unsigned int bit;
+ unsigned char mask;
+ unsigned char from_data;
+ unsigned char from_oob;
+
+ if (!this->swap_block_mark)
+ return;
+
+ /*
+ * If control arrives here, we're swapping. Make some convenience
+ * variables.
+ */
+ bit = nfc_geo->block_mark_bit_offset;
+ p = payload + nfc_geo->block_mark_byte_offset;
+ a = auxiliary;
+
+ /*
+ * Get the byte from the data area that overlays the block mark. Since
+ * the ECC engine applies its own view to the bits in the page, the
+ * physical block mark won't (in general) appear on a byte boundary in
+ * the data.
+ */
+ from_data = (p[0] >> bit) | (p[1] << (8 - bit));
+
+ /* Get the byte from the OOB. */
+ from_oob = a[0];
+
+ /* Swap them. */
+ a[0] = from_data;
+
+ mask = (0x1 << bit) - 1;
+ p[0] = (p[0] & mask) | (from_oob << bit);
+
+ mask = ~0 << bit;
+ p[1] = (p[1] & mask) | (from_oob >> (8 - bit));
+}
+
+static int gpmi_ecc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ void *payload_virt;
+ dma_addr_t payload_phys;
+ void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+ unsigned int i;
+ unsigned char *status;
+ unsigned int max_bitflips = 0;
+ int ret;
+
+ dev_dbg(this->dev, "page number is : %d\n", page);
+ ret = read_page_prepare(this, buf, nfc_geo->payload_size,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ &payload_virt, &payload_phys);
+ if (ret) {
+ dev_err(this->dev, "Inadequate DMA buffer\n");
+ ret = -ENOMEM;
+ return ret;
+ }
+ auxiliary_virt = this->auxiliary_virt;
+ auxiliary_phys = this->auxiliary_phys;
+
+ /* go! */
+ ret = gpmi_read_page(this, payload_phys, auxiliary_phys);
+ read_page_end(this, buf, nfc_geo->payload_size,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ if (ret) {
+ dev_err(this->dev, "Error in ECC-based read: %d\n", ret);
+ return ret;
+ }
+
+ /* handle the block mark swapping */
+ block_mark_swapping(this, payload_virt, auxiliary_virt);
+
+ /* Loop over status bytes, accumulating ECC status. */
+ status = auxiliary_virt + nfc_geo->auxiliary_status_offset;
+
+ for (i = 0; i < nfc_geo->ecc_chunk_count; i++, status++) {
+ if ((*status == STATUS_GOOD) || (*status == STATUS_ERASED))
+ continue;
+
+ if (*status == STATUS_UNCORRECTABLE) {
+ mtd->ecc_stats.failed++;
+ continue;
+ }
+ mtd->ecc_stats.corrected += *status;
+ max_bitflips = max_t(unsigned int, max_bitflips, *status);
+ }
+
+ if (oob_required) {
+ /*
+ * It's time to deliver the OOB bytes. See gpmi_ecc_read_oob()
+ * for details about our policy for delivering the OOB.
+ *
+ * We fill the caller's buffer with set bits, and then copy the
+ * block mark to th caller's buffer. Note that, if block mark
+ * swapping was necessary, it has already been done, so we can
+ * rely on the first byte of the auxiliary buffer to contain
+ * the block mark.
+ */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+ chip->oob_poi[0] = ((uint8_t *) auxiliary_virt)[0];
+ }
+
+ read_page_swap_end(this, buf, nfc_geo->payload_size,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+
+ return max_bitflips;
+}
+
+/* Fake a virtual small page for the subpage read */
+static int gpmi_ecc_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offs, uint32_t len, uint8_t *buf, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ void __iomem *bch_regs = this->resources.bch_regs;
+ struct bch_geometry old_geo = this->bch_geometry;
+ struct bch_geometry *geo = &this->bch_geometry;
+ int size = chip->ecc.size; /* ECC chunk size */
+ int meta, n, page_size;
+ u32 r1_old, r2_old, r1_new, r2_new;
+ unsigned int max_bitflips;
+ int first, last, marker_pos;
+ int ecc_parity_size;
+ int col = 0;
+ int old_swap_block_mark = this->swap_block_mark;
+
+ /* The size of ECC parity */
+ ecc_parity_size = geo->gf_len * geo->ecc_strength / 8;
+
+ /* Align it with the chunk size */
+ first = offs / size;
+ last = (offs + len - 1) / size;
+
+ if (this->swap_block_mark) {
+ /*
+ * Find the chunk which contains the Block Marker.
+ * If this chunk is in the range of [first, last],
+ * we have to read out the whole page.
+ * Why? since we had swapped the data at the position of Block
+ * Marker to the metadata which is bound with the chunk 0.
+ */
+ marker_pos = geo->block_mark_byte_offset / size;
+ if (last >= marker_pos && first <= marker_pos) {
+ dev_dbg(this->dev,
+ "page:%d, first:%d, last:%d, marker at:%d\n",
+ page, first, last, marker_pos);
+ return gpmi_ecc_read_page(mtd, chip, buf, 0, page);
+ }
+ }
+
+ meta = geo->metadata_size;
+ if (first) {
+ col = meta + (size + ecc_parity_size) * first;
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, col, -1);
+
+ meta = 0;
+ buf = buf + first * size;
+ }
+
+ /* Save the old environment */
+ r1_old = r1_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT0);
+ r2_old = r2_new = readl(bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+ /* change the BCH registers and bch_geometry{} */
+ n = last - first + 1;
+ page_size = meta + (size + ecc_parity_size) * n;
+
+ r1_new &= ~(BM_BCH_FLASH0LAYOUT0_NBLOCKS |
+ BM_BCH_FLASH0LAYOUT0_META_SIZE);
+ r1_new |= BF_BCH_FLASH0LAYOUT0_NBLOCKS(n - 1)
+ | BF_BCH_FLASH0LAYOUT0_META_SIZE(meta);
+ writel(r1_new, bch_regs + HW_BCH_FLASH0LAYOUT0);
+
+ r2_new &= ~BM_BCH_FLASH0LAYOUT1_PAGE_SIZE;
+ r2_new |= BF_BCH_FLASH0LAYOUT1_PAGE_SIZE(page_size);
+ writel(r2_new, bch_regs + HW_BCH_FLASH0LAYOUT1);
+
+ geo->ecc_chunk_count = n;
+ geo->payload_size = n * size;
+ geo->page_size = page_size;
+ geo->auxiliary_status_offset = ALIGN(meta, 4);
+
+ dev_dbg(this->dev, "page:%d(%d:%d)%d, chunk:(%d:%d), BCH PG size:%d\n",
+ page, offs, len, col, first, n, page_size);
+
+ /* Read the subpage now */
+ this->swap_block_mark = false;
+ max_bitflips = gpmi_ecc_read_page(mtd, chip, buf, 0, page);
+
+ /* Restore */
+ writel(r1_old, bch_regs + HW_BCH_FLASH0LAYOUT0);
+ writel(r2_old, bch_regs + HW_BCH_FLASH0LAYOUT1);
+ this->bch_geometry = old_geo;
+ this->swap_block_mark = old_swap_block_mark;
+
+ return max_bitflips;
+}
+
+static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ const void *payload_virt;
+ dma_addr_t payload_phys;
+ const void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+ int ret;
+
+ dev_dbg(this->dev, "ecc write page.\n");
+ if (this->swap_block_mark) {
+ /*
+ * If control arrives here, we're doing block mark swapping.
+ * Since we can't modify the caller's buffers, we must copy them
+ * into our own.
+ */
+ memcpy(this->payload_virt, buf, mtd->writesize);
+ payload_virt = this->payload_virt;
+ payload_phys = this->payload_phys;
+
+ memcpy(this->auxiliary_virt, chip->oob_poi,
+ nfc_geo->auxiliary_size);
+ auxiliary_virt = this->auxiliary_virt;
+ auxiliary_phys = this->auxiliary_phys;
+
+ /* Handle block mark swapping. */
+ block_mark_swapping(this,
+ (void *)payload_virt, (void *)auxiliary_virt);
+ } else {
+ /*
+ * If control arrives here, we're not doing block mark swapping,
+ * so we can to try and use the caller's buffers.
+ */
+ ret = send_page_prepare(this,
+ buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ &payload_virt, &payload_phys);
+ if (ret) {
+ dev_err(this->dev, "Inadequate payload DMA buffer\n");
+ return 0;
+ }
+
+ ret = send_page_prepare(this,
+ chip->oob_poi, mtd->oobsize,
+ this->auxiliary_virt, this->auxiliary_phys,
+ nfc_geo->auxiliary_size,
+ &auxiliary_virt, &auxiliary_phys);
+ if (ret) {
+ dev_err(this->dev, "Inadequate auxiliary DMA buffer\n");
+ goto exit_auxiliary;
+ }
+ }
+
+ /* Ask the NFC. */
+ ret = gpmi_send_page(this, payload_phys, auxiliary_phys);
+ if (ret)
+ dev_err(this->dev, "Error in ECC-based write: %d\n", ret);
+
+ if (!this->swap_block_mark) {
+ send_page_end(this, chip->oob_poi, mtd->oobsize,
+ this->auxiliary_virt, this->auxiliary_phys,
+ nfc_geo->auxiliary_size,
+ auxiliary_virt, auxiliary_phys);
+exit_auxiliary:
+ send_page_end(this, buf, mtd->writesize,
+ this->payload_virt, this->payload_phys,
+ nfc_geo->payload_size,
+ payload_virt, payload_phys);
+ }
+
+ return 0;
+}
+
+/*
+ * There are several places in this driver where we have to handle the OOB and
+ * block marks. This is the function where things are the most complicated, so
+ * this is where we try to explain it all. All the other places refer back to
+ * here.
+ *
+ * These are the rules, in order of decreasing importance:
+ *
+ * 1) Nothing the caller does can be allowed to imperil the block mark.
+ *
+ * 2) In read operations, the first byte of the OOB we return must reflect the
+ * true state of the block mark, no matter where that block mark appears in
+ * the physical page.
+ *
+ * 3) ECC-based read operations return an OOB full of set bits (since we never
+ * allow ECC-based writes to the OOB, it doesn't matter what ECC-based reads
+ * return).
+ *
+ * 4) "Raw" read operations return a direct view of the physical bytes in the
+ * page, using the conventional definition of which bytes are data and which
+ * are OOB. This gives the caller a way to see the actual, physical bytes
+ * in the page, without the distortions applied by our ECC engine.
+ *
+ *
+ * What we do for this specific read operation depends on two questions:
+ *
+ * 1) Are we doing a "raw" read, or an ECC-based read?
+ *
+ * 2) Are we using block mark swapping or transcription?
+ *
+ * There are four cases, illustrated by the following Karnaugh map:
+ *
+ * | Raw | ECC-based |
+ * -------------+-------------------------+-------------------------+
+ * | Read the conventional | |
+ * | OOB at the end of the | |
+ * Swapping | page and return it. It | |
+ * | contains exactly what | |
+ * | we want. | Read the block mark and |
+ * -------------+-------------------------+ return it in a buffer |
+ * | Read the conventional | full of set bits. |
+ * | OOB at the end of the | |
+ * | page and also the block | |
+ * Transcribing | mark in the metadata. | |
+ * | Copy the block mark | |
+ * | into the first byte of | |
+ * | the OOB. | |
+ * -------------+-------------------------+-------------------------+
+ *
+ * Note that we break rule #4 in the Transcribing/Raw case because we're not
+ * giving an accurate view of the actual, physical bytes in the page (we're
+ * overwriting the block mark). That's OK because it's more important to follow
+ * rule #2.
+ *
+ * It turns out that knowing whether we want an "ECC-based" or "raw" read is not
+ * easy. When reading a page, for example, the NAND Flash MTD code calls our
+ * ecc.read_page or ecc.read_page_raw function. Thus, the fact that MTD wants an
+ * ECC-based or raw view of the page is implicit in which function it calls
+ * (there is a similar pair of ECC-based/raw functions for writing).
+ */
+static int gpmi_ecc_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+
+ dev_dbg(this->dev, "page number is %d\n", page);
+ /* clear the OOB buffer */
+ memset(chip->oob_poi, ~0, mtd->oobsize);
+
+ /* Read out the conventional OOB. */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /*
+ * Now, we want to make sure the block mark is correct. In the
+ * non-transcribing case (!GPMI_IS_MX23()), we already have it.
+ * Otherwise, we need to explicitly read it.
+ */
+ if (GPMI_IS_MX23(this)) {
+ /* Read the block mark into the first byte of the OOB buffer. */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+ chip->oob_poi[0] = chip->read_byte(mtd);
+ }
+
+ return 0;
+}
+
+static int
+gpmi_ecc_write_oob(struct mtd_info *mtd, struct nand_chip *chip, int page)
+{
+ struct nand_oobfree *of = mtd->ecclayout->oobfree;
+ int status = 0;
+
+ /* Do we have available oob area? */
+ if (!of->length)
+ return -EPERM;
+
+ if (!nand_is_slc(chip))
+ return -EPERM;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize + of->offset, page);
+ chip->write_buf(mtd, chip->oob_poi + of->offset, of->length);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/*
+ * This function reads a NAND page without involving the ECC engine (no HW
+ * ECC correction).
+ * The tricky part in the GPMI/BCH controller is that it stores ECC bits
+ * inline (interleaved with payload DATA), and do not align data chunk on
+ * byte boundaries.
+ * We thus need to take care moving the payload data and ECC bits stored in the
+ * page into the provided buffers, which is why we're using gpmi_copy_bits.
+ *
+ * See set_geometry_by_ecc_info inline comments to have a full description
+ * of the layout used by the GPMI controller.
+ */
+static int gpmi_ecc_read_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ int eccsize = nfc_geo->ecc_chunk_size;
+ int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
+ u8 *tmp_buf = this->raw_buffer;
+ size_t src_bit_off;
+ size_t oob_bit_off;
+ size_t oob_byte_off;
+ uint8_t *oob = chip->oob_poi;
+ int step;
+
+ chip->read_buf(mtd, tmp_buf,
+ mtd->writesize + mtd->oobsize);
+
+ /*
+ * If required, swap the bad block marker and the data stored in the
+ * metadata section, so that we don't wrongly consider a block as bad.
+ *
+ * See the layout description for a detailed explanation on why this
+ * is needed.
+ */
+ if (this->swap_block_mark) {
+ u8 swap = tmp_buf[0];
+
+ tmp_buf[0] = tmp_buf[mtd->writesize];
+ tmp_buf[mtd->writesize] = swap;
+ }
+
+ /*
+ * Copy the metadata section into the oob buffer (this section is
+ * guaranteed to be aligned on a byte boundary).
+ */
+ if (oob_required)
+ memcpy(oob, tmp_buf, nfc_geo->metadata_size);
+
+ oob_bit_off = nfc_geo->metadata_size * 8;
+ src_bit_off = oob_bit_off;
+
+ /* Extract interleaved payload data and ECC bits */
+ for (step = 0; step < nfc_geo->ecc_chunk_count; step++) {
+ if (buf)
+ gpmi_copy_bits(buf, step * eccsize * 8,
+ tmp_buf, src_bit_off,
+ eccsize * 8);
+ src_bit_off += eccsize * 8;
+
+ /* Align last ECC block to align a byte boundary */
+ if (step == nfc_geo->ecc_chunk_count - 1 &&
+ (oob_bit_off + eccbits) % 8)
+ eccbits += 8 - ((oob_bit_off + eccbits) % 8);
+
+ if (oob_required)
+ gpmi_copy_bits(oob, oob_bit_off,
+ tmp_buf, src_bit_off,
+ eccbits);
+
+ src_bit_off += eccbits;
+ oob_bit_off += eccbits;
+ }
+
+ if (oob_required) {
+ oob_byte_off = oob_bit_off / 8;
+
+ if (oob_byte_off < mtd->oobsize)
+ memcpy(oob + oob_byte_off,
+ tmp_buf + mtd->writesize + oob_byte_off,
+ mtd->oobsize - oob_byte_off);
+ }
+
+ return 0;
+}
+
+/*
+ * This function writes a NAND page without involving the ECC engine (no HW
+ * ECC generation).
+ * The tricky part in the GPMI/BCH controller is that it stores ECC bits
+ * inline (interleaved with payload DATA), and do not align data chunk on
+ * byte boundaries.
+ * We thus need to take care moving the OOB area at the right place in the
+ * final page, which is why we're using gpmi_copy_bits.
+ *
+ * See set_geometry_by_ecc_info inline comments to have a full description
+ * of the layout used by the GPMI controller.
+ */
+static int gpmi_ecc_write_page_raw(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf,
+ int oob_required, int page)
+{
+ struct gpmi_nand_data *this = chip->priv;
+ struct bch_geometry *nfc_geo = &this->bch_geometry;
+ int eccsize = nfc_geo->ecc_chunk_size;
+ int eccbits = nfc_geo->ecc_strength * nfc_geo->gf_len;
+ u8 *tmp_buf = this->raw_buffer;
+ uint8_t *oob = chip->oob_poi;
+ size_t dst_bit_off;
+ size_t oob_bit_off;
+ size_t oob_byte_off;
+ int step;
+
+ /*
+ * Initialize all bits to 1 in case we don't have a buffer for the
+ * payload or oob data in order to leave unspecified bits of data
+ * to their initial state.
+ */
+ if (!buf || !oob_required)
+ memset(tmp_buf, 0xff, mtd->writesize + mtd->oobsize);
+
+ /*
+ * First copy the metadata section (stored in oob buffer) at the
+ * beginning of the page, as imposed by the GPMI layout.
+ */
+ memcpy(tmp_buf, oob, nfc_geo->metadata_size);
+ oob_bit_off = nfc_geo->metadata_size * 8;
+ dst_bit_off = oob_bit_off;
+
+ /* Interleave payload data and ECC bits */
+ for (step = 0; step < nfc_geo->ecc_chunk_count; step++) {
+ if (buf)
+ gpmi_copy_bits(tmp_buf, dst_bit_off,
+ buf, step * eccsize * 8, eccsize * 8);
+ dst_bit_off += eccsize * 8;
+
+ /* Align last ECC block to align a byte boundary */
+ if (step == nfc_geo->ecc_chunk_count - 1 &&
+ (oob_bit_off + eccbits) % 8)
+ eccbits += 8 - ((oob_bit_off + eccbits) % 8);
+
+ if (oob_required)
+ gpmi_copy_bits(tmp_buf, dst_bit_off,
+ oob, oob_bit_off, eccbits);
+
+ dst_bit_off += eccbits;
+ oob_bit_off += eccbits;
+ }
+
+ oob_byte_off = oob_bit_off / 8;
+
+ if (oob_required && oob_byte_off < mtd->oobsize)
+ memcpy(tmp_buf + mtd->writesize + oob_byte_off,
+ oob + oob_byte_off, mtd->oobsize - oob_byte_off);
+
+ /*
+ * If required, swap the bad block marker and the first byte of the
+ * metadata section, so that we don't modify the bad block marker.
+ *
+ * See the layout description for a detailed explanation on why this
+ * is needed.
+ */
+ if (this->swap_block_mark) {
+ u8 swap = tmp_buf[0];
+
+ tmp_buf[0] = tmp_buf[mtd->writesize];
+ tmp_buf[mtd->writesize] = swap;
+ }
+
+ chip->write_buf(mtd, tmp_buf, mtd->writesize + mtd->oobsize);
+
+ return 0;
+}
+
+static int gpmi_ecc_read_oob_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ return gpmi_ecc_read_page_raw(mtd, chip, NULL, 1, page);
+}
+
+static int gpmi_ecc_write_oob_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0, page);
+
+ return gpmi_ecc_write_page_raw(mtd, chip, NULL, 1, page);
+}
+
+static int gpmi_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct gpmi_nand_data *this = chip->priv;
+ int ret = 0;
+ uint8_t *block_mark;
+ int column, page, status, chipnr;
+
+ chipnr = (int)(ofs >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ column = !GPMI_IS_MX23(this) ? mtd->writesize : 0;
+
+ /* Write the block mark. */
+ block_mark = this->data_buffer_dma;
+ block_mark[0] = 0; /* bad block marker */
+
+ /* Shift to get page */
+ page = (int)(ofs >> chip->page_shift);
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, column, page);
+ chip->write_buf(mtd, block_mark, 1);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ ret = -EIO;
+
+ chip->select_chip(mtd, -1);
+
+ return ret;
+}
+
+static int nand_boot_set_geometry(struct gpmi_nand_data *this)
+{
+ struct boot_rom_geometry *geometry = &this->rom_geometry;
+
+ /*
+ * Set the boot block stride size.
+ *
+ * In principle, we should be reading this from the OTP bits, since
+ * that's where the ROM is going to get it. In fact, we don't have any
+ * way to read the OTP bits, so we go with the default and hope for the
+ * best.
+ */
+ geometry->stride_size_in_pages = 64;
+
+ /*
+ * Set the search area stride exponent.
+ *
+ * In principle, we should be reading this from the OTP bits, since
+ * that's where the ROM is going to get it. In fact, we don't have any
+ * way to read the OTP bits, so we go with the default and hope for the
+ * best.
+ */
+ geometry->search_area_stride_exponent = 2;
+ return 0;
+}
+
+static const char *fingerprint = "STMP";
+static int mx23_check_transcription_stamp(struct gpmi_nand_data *this)
+{
+ struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+ struct device *dev = this->dev;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ unsigned int search_area_size_in_strides;
+ unsigned int stride;
+ unsigned int page;
+ uint8_t *buffer = chip->buffers->databuf;
+ int saved_chip_number;
+ int found_an_ncb_fingerprint = false;
+
+ /* Compute the number of strides in a search area. */
+ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+
+ saved_chip_number = this->current_chip;
+ chip->select_chip(mtd, 0);
+
+ /*
+ * Loop through the first search area, looking for the NCB fingerprint.
+ */
+ dev_dbg(dev, "Scanning for an NCB fingerprint...\n");
+
+ for (stride = 0; stride < search_area_size_in_strides; stride++) {
+ /* Compute the page addresses. */
+ page = stride * rom_geo->stride_size_in_pages;
+
+ dev_dbg(dev, "Looking for a fingerprint in page 0x%x\n", page);
+
+ /*
+ * Read the NCB fingerprint. The fingerprint is four bytes long
+ * and starts in the 12th byte of the page.
+ */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 12, page);
+ chip->read_buf(mtd, buffer, strlen(fingerprint));
+
+ /* Look for the fingerprint. */
+ if (!memcmp(buffer, fingerprint, strlen(fingerprint))) {
+ found_an_ncb_fingerprint = true;
+ break;
+ }
+
+ }
+
+ chip->select_chip(mtd, saved_chip_number);
+
+ if (found_an_ncb_fingerprint)
+ dev_dbg(dev, "\tFound a fingerprint\n");
+ else
+ dev_dbg(dev, "\tNo fingerprint found\n");
+ return found_an_ncb_fingerprint;
+}
+
+/* Writes a transcription stamp. */
+static int mx23_write_transcription_stamp(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+ struct boot_rom_geometry *rom_geo = &this->rom_geometry;
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ unsigned int block_size_in_pages;
+ unsigned int search_area_size_in_strides;
+ unsigned int search_area_size_in_pages;
+ unsigned int search_area_size_in_blocks;
+ unsigned int block;
+ unsigned int stride;
+ unsigned int page;
+ uint8_t *buffer = chip->buffers->databuf;
+ int saved_chip_number;
+ int status;
+
+ /* Compute the search area geometry. */
+ block_size_in_pages = mtd->erasesize / mtd->writesize;
+ search_area_size_in_strides = 1 << rom_geo->search_area_stride_exponent;
+ search_area_size_in_pages = search_area_size_in_strides *
+ rom_geo->stride_size_in_pages;
+ search_area_size_in_blocks =
+ (search_area_size_in_pages + (block_size_in_pages - 1)) /
+ block_size_in_pages;
+
+ dev_dbg(dev, "Search Area Geometry :\n");
+ dev_dbg(dev, "\tin Blocks : %u\n", search_area_size_in_blocks);
+ dev_dbg(dev, "\tin Strides: %u\n", search_area_size_in_strides);
+ dev_dbg(dev, "\tin Pages : %u\n", search_area_size_in_pages);
+
+ /* Select chip 0. */
+ saved_chip_number = this->current_chip;
+ chip->select_chip(mtd, 0);
+
+ /* Loop over blocks in the first search area, erasing them. */
+ dev_dbg(dev, "Erasing the search area...\n");
+
+ for (block = 0; block < search_area_size_in_blocks; block++) {
+ /* Compute the page address. */
+ page = block * block_size_in_pages;
+
+ /* Erase this block. */
+ dev_dbg(dev, "\tErasing block 0x%x\n", block);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+ /* Wait for the erase to finish. */
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ dev_err(dev, "[%s] Erase failed.\n", __func__);
+ }
+
+ /* Write the NCB fingerprint into the page buffer. */
+ memset(buffer, ~0, mtd->writesize);
+ memcpy(buffer + 12, fingerprint, strlen(fingerprint));
+
+ /* Loop through the first search area, writing NCB fingerprints. */
+ dev_dbg(dev, "Writing NCB fingerprints...\n");
+ for (stride = 0; stride < search_area_size_in_strides; stride++) {
+ /* Compute the page addresses. */
+ page = stride * rom_geo->stride_size_in_pages;
+
+ /* Write the first page of the current stride. */
+ dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page);
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+ chip->ecc.write_page_raw(mtd, chip, buffer, 0, page);
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ /* Wait for the write to finish. */
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ dev_err(dev, "[%s] Write failed.\n", __func__);
+ }
+
+ /* Deselect chip 0. */
+ chip->select_chip(mtd, saved_chip_number);
+ return 0;
+}
+
+static int mx23_boot_init(struct gpmi_nand_data *this)
+{
+ struct device *dev = this->dev;
+ struct nand_chip *chip = &this->nand;
+ struct mtd_info *mtd = &this->mtd;
+ unsigned int block_count;
+ unsigned int block;
+ int chipnr;
+ int page;
+ loff_t byte;
+ uint8_t block_mark;
+ int ret = 0;
+
+ /*
+ * If control arrives here, we can't use block mark swapping, which
+ * means we're forced to use transcription. First, scan for the
+ * transcription stamp. If we find it, then we don't have to do
+ * anything -- the block marks are already transcribed.
+ */
+ if (mx23_check_transcription_stamp(this))
+ return 0;
+
+ /*
+ * If control arrives here, we couldn't find a transcription stamp, so
+ * so we presume the block marks are in the conventional location.
+ */
+ dev_dbg(dev, "Transcribing bad block marks...\n");
+
+ /* Compute the number of blocks in the entire medium. */
+ block_count = chip->chipsize >> chip->phys_erase_shift;
+
+ /*
+ * Loop over all the blocks in the medium, transcribing block marks as
+ * we go.
+ */
+ for (block = 0; block < block_count; block++) {
+ /*
+ * Compute the chip, page and byte addresses for this block's
+ * conventional mark.
+ */
+ chipnr = block >> (chip->chip_shift - chip->phys_erase_shift);
+ page = block << (chip->phys_erase_shift - chip->page_shift);
+ byte = block << chip->phys_erase_shift;
+
+ /* Send the command to read the conventional block mark. */
+ chip->select_chip(mtd, chipnr);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, mtd->writesize, page);
+ block_mark = chip->read_byte(mtd);
+ chip->select_chip(mtd, -1);
+
+ /*
+ * Check if the block is marked bad. If so, we need to mark it
+ * again, but this time the result will be a mark in the
+ * location where we transcribe block marks.
+ */
+ if (block_mark != 0xff) {
+ dev_dbg(dev, "Transcribing mark in block %u\n", block);
+ ret = chip->block_markbad(mtd, byte);
+ if (ret)
+ dev_err(dev,
+ "Failed to mark block bad with ret %d\n",
+ ret);
+ }
+ }
+
+ /* Write the stamp that indicates we've transcribed the block marks. */
+ mx23_write_transcription_stamp(this);
+ return 0;
+}
+
+static int nand_boot_init(struct gpmi_nand_data *this)
+{
+ nand_boot_set_geometry(this);
+
+ /* This is ROM arch-specific initilization before the BBT scanning. */
+ if (GPMI_IS_MX23(this))
+ return mx23_boot_init(this);
+ return 0;
+}
+
+static int gpmi_set_geometry(struct gpmi_nand_data *this)
+{
+ int ret;
+
+ /* Free the temporary DMA memory for reading ID. */
+ gpmi_free_dma_buffer(this);
+
+ /* Set up the NFC geometry which is used by BCH. */
+ ret = bch_set_geometry(this);
+ if (ret) {
+ dev_err(this->dev, "Error setting BCH geometry : %d\n", ret);
+ return ret;
+ }
+
+ /* Alloc the new DMA buffers according to the pagesize and oobsize */
+ return gpmi_alloc_dma_buffer(this);
+}
+
+static void gpmi_nand_exit(struct gpmi_nand_data *this)
+{
+ nand_release(&this->mtd);
+ gpmi_free_dma_buffer(this);
+}
+
+static int gpmi_init_last(struct gpmi_nand_data *this)
+{
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct bch_geometry *bch_geo = &this->bch_geometry;
+ int ret;
+
+ /* Set up the medium geometry */
+ ret = gpmi_set_geometry(this);
+ if (ret)
+ return ret;
+
+ /* Init the nand_ecc_ctrl{} */
+ ecc->read_page = gpmi_ecc_read_page;
+ ecc->write_page = gpmi_ecc_write_page;
+ ecc->read_oob = gpmi_ecc_read_oob;
+ ecc->write_oob = gpmi_ecc_write_oob;
+ ecc->read_page_raw = gpmi_ecc_read_page_raw;
+ ecc->write_page_raw = gpmi_ecc_write_page_raw;
+ ecc->read_oob_raw = gpmi_ecc_read_oob_raw;
+ ecc->write_oob_raw = gpmi_ecc_write_oob_raw;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = bch_geo->ecc_chunk_size;
+ ecc->strength = bch_geo->ecc_strength;
+ ecc->layout = &gpmi_hw_ecclayout;
+
+ /*
+ * We only enable the subpage read when:
+ * (1) the chip is imx6, and
+ * (2) the size of the ECC parity is byte aligned.
+ */
+ if (GPMI_IS_MX6(this) &&
+ ((bch_geo->gf_len * bch_geo->ecc_strength) % 8) == 0) {
+ ecc->read_subpage = gpmi_ecc_read_subpage;
+ chip->options |= NAND_SUBPAGE_READ;
+ }
+
+ /*
+ * Can we enable the extra features? such as EDO or Sync mode.
+ *
+ * We do not check the return value now. That's means if we fail in
+ * enable the extra features, we still can run in the normal way.
+ */
+ gpmi_extra_init(this);
+
+ return 0;
+}
+
+static int gpmi_nand_init(struct gpmi_nand_data *this)
+{
+ struct mtd_info *mtd = &this->mtd;
+ struct nand_chip *chip = &this->nand;
+ struct mtd_part_parser_data ppdata = {};
+ int ret;
+
+ /* init current chip */
+ this->current_chip = -1;
+
+ /* init the MTD data structures */
+ mtd->priv = chip;
+ mtd->name = "gpmi-nand";
+ mtd->dev.parent = this->dev;
+
+ /* init the nand_chip{}, we don't support a 16-bit NAND Flash bus. */
+ chip->priv = this;
+ chip->select_chip = gpmi_select_chip;
+ chip->cmd_ctrl = gpmi_cmd_ctrl;
+ chip->dev_ready = gpmi_dev_ready;
+ chip->read_byte = gpmi_read_byte;
+ chip->read_buf = gpmi_read_buf;
+ chip->write_buf = gpmi_write_buf;
+ chip->badblock_pattern = &gpmi_bbt_descr;
+ chip->block_markbad = gpmi_block_markbad;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+
+ /* Set up swap_block_mark, must be set before the gpmi_set_geometry() */
+ this->swap_block_mark = !GPMI_IS_MX23(this);
+
+ if (of_get_nand_on_flash_bbt(this->dev->of_node)) {
+ chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+
+ if (of_property_read_bool(this->dev->of_node,
+ "fsl,no-blockmark-swap"))
+ this->swap_block_mark = false;
+ }
+ dev_dbg(this->dev, "Blockmark swapping %sabled\n",
+ this->swap_block_mark ? "en" : "dis");
+
+ /*
+ * Allocate a temporary DMA buffer for reading ID in the
+ * nand_scan_ident().
+ */
+ this->bch_geometry.payload_size = 1024;
+ this->bch_geometry.auxiliary_size = 128;
+ ret = gpmi_alloc_dma_buffer(this);
+ if (ret)
+ goto err_out;
+
+ ret = nand_scan_ident(mtd, GPMI_IS_MX6(this) ? 2 : 1, NULL);
+ if (ret)
+ goto err_out;
+
+ ret = gpmi_init_last(this);
+ if (ret)
+ goto err_out;
+
+ chip->options |= NAND_SKIP_BBTSCAN;
+ ret = nand_scan_tail(mtd);
+ if (ret)
+ goto err_out;
+
+ ret = nand_boot_init(this);
+ if (ret)
+ goto err_out;
+ ret = chip->scan_bbt(mtd);
+ if (ret)
+ goto err_out;
+
+ ppdata.of_node = this->pdev->dev.of_node;
+ ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+ if (ret)
+ goto err_out;
+ return 0;
+
+err_out:
+ gpmi_nand_exit(this);
+ return ret;
+}
+
+static const struct of_device_id gpmi_nand_id_table[] = {
+ {
+ .compatible = "fsl,imx23-gpmi-nand",
+ .data = &gpmi_devdata_imx23,
+ }, {
+ .compatible = "fsl,imx28-gpmi-nand",
+ .data = &gpmi_devdata_imx28,
+ }, {
+ .compatible = "fsl,imx6q-gpmi-nand",
+ .data = &gpmi_devdata_imx6q,
+ }, {
+ .compatible = "fsl,imx6sx-gpmi-nand",
+ .data = &gpmi_devdata_imx6sx,
+ }, {}
+};
+MODULE_DEVICE_TABLE(of, gpmi_nand_id_table);
+
+static int gpmi_nand_probe(struct platform_device *pdev)
+{
+ struct gpmi_nand_data *this;
+ const struct of_device_id *of_id;
+ int ret;
+
+ this = devm_kzalloc(&pdev->dev, sizeof(*this), GFP_KERNEL);
+ if (!this)
+ return -ENOMEM;
+
+ of_id = of_match_device(gpmi_nand_id_table, &pdev->dev);
+ if (of_id) {
+ this->devdata = of_id->data;
+ } else {
+ dev_err(&pdev->dev, "Failed to find the right device id.\n");
+ return -ENODEV;
+ }
+
+ platform_set_drvdata(pdev, this);
+ this->pdev = pdev;
+ this->dev = &pdev->dev;
+
+ ret = acquire_resources(this);
+ if (ret)
+ goto exit_acquire_resources;
+
+ ret = init_hardware(this);
+ if (ret)
+ goto exit_nfc_init;
+
+ ret = gpmi_nand_init(this);
+ if (ret)
+ goto exit_nfc_init;
+
+ dev_info(this->dev, "driver registered.\n");
+
+ return 0;
+
+exit_nfc_init:
+ release_resources(this);
+exit_acquire_resources:
+
+ return ret;
+}
+
+static int gpmi_nand_remove(struct platform_device *pdev)
+{
+ struct gpmi_nand_data *this = platform_get_drvdata(pdev);
+
+ gpmi_nand_exit(this);
+ release_resources(this);
+ return 0;
+}
+
+static struct platform_driver gpmi_nand_driver = {
+ .driver = {
+ .name = "gpmi-nand",
+ .of_match_table = gpmi_nand_id_table,
+ },
+ .probe = gpmi_nand_probe,
+ .remove = gpmi_nand_remove,
+};
+module_platform_driver(gpmi_nand_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("i.MX GPMI NAND Flash Controller Driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
new file mode 100644
index 0000000..544062f
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h
@@ -0,0 +1,311 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
+ * Copyright (C) 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#ifndef __DRIVERS_MTD_NAND_GPMI_NAND_H
+#define __DRIVERS_MTD_NAND_GPMI_NAND_H
+
+#include <linux/mtd/nand.h>
+#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+
+#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */
+struct resources {
+ void __iomem *gpmi_regs;
+ void __iomem *bch_regs;
+ unsigned int dma_low_channel;
+ unsigned int dma_high_channel;
+ struct clk *clock[GPMI_CLK_MAX];
+};
+
+/**
+ * struct bch_geometry - BCH geometry description.
+ * @gf_len: The length of Galois Field. (e.g., 13 or 14)
+ * @ecc_strength: A number that describes the strength of the ECC
+ * algorithm.
+ * @page_size: The size, in bytes, of a physical page, including
+ * both data and OOB.
+ * @metadata_size: The size, in bytes, of the metadata.
+ * @ecc_chunk_size: The size, in bytes, of a single ECC chunk. Note
+ * the first chunk in the page includes both data and
+ * metadata, so it's a bit larger than this value.
+ * @ecc_chunk_count: The number of ECC chunks in the page,
+ * @payload_size: The size, in bytes, of the payload buffer.
+ * @auxiliary_size: The size, in bytes, of the auxiliary buffer.
+ * @auxiliary_status_offset: The offset into the auxiliary buffer at which
+ * the ECC status appears.
+ * @block_mark_byte_offset: The byte offset in the ECC-based page view at
+ * which the underlying physical block mark appears.
+ * @block_mark_bit_offset: The bit offset into the ECC-based page view at
+ * which the underlying physical block mark appears.
+ */
+struct bch_geometry {
+ unsigned int gf_len;
+ unsigned int ecc_strength;
+ unsigned int page_size;
+ unsigned int metadata_size;
+ unsigned int ecc_chunk_size;
+ unsigned int ecc_chunk_count;
+ unsigned int payload_size;
+ unsigned int auxiliary_size;
+ unsigned int auxiliary_status_offset;
+ unsigned int block_mark_byte_offset;
+ unsigned int block_mark_bit_offset;
+};
+
+/**
+ * struct boot_rom_geometry - Boot ROM geometry description.
+ * @stride_size_in_pages: The size of a boot block stride, in pages.
+ * @search_area_stride_exponent: The logarithm to base 2 of the size of a
+ * search area in boot block strides.
+ */
+struct boot_rom_geometry {
+ unsigned int stride_size_in_pages;
+ unsigned int search_area_stride_exponent;
+};
+
+/* DMA operations types */
+enum dma_ops_type {
+ DMA_FOR_COMMAND = 1,
+ DMA_FOR_READ_DATA,
+ DMA_FOR_WRITE_DATA,
+ DMA_FOR_READ_ECC_PAGE,
+ DMA_FOR_WRITE_ECC_PAGE
+};
+
+/**
+ * struct nand_timing - Fundamental timing attributes for NAND.
+ * @data_setup_in_ns: The data setup time, in nanoseconds. Usually the
+ * maximum of tDS and tWP. A negative value
+ * indicates this characteristic isn't known.
+ * @data_hold_in_ns: The data hold time, in nanoseconds. Usually the
+ * maximum of tDH, tWH and tREH. A negative value
+ * indicates this characteristic isn't known.
+ * @address_setup_in_ns: The address setup time, in nanoseconds. Usually
+ * the maximum of tCLS, tCS and tALS. A negative
+ * value indicates this characteristic isn't known.
+ * @gpmi_sample_delay_in_ns: A GPMI-specific timing parameter. A negative value
+ * indicates this characteristic isn't known.
+ * @tREA_in_ns: tREA, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ * @tRLOH_in_ns: tRLOH, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ * @tRHOH_in_ns: tRHOH, in nanoseconds, from the data sheet. A
+ * negative value indicates this characteristic isn't
+ * known.
+ */
+struct nand_timing {
+ int8_t data_setup_in_ns;
+ int8_t data_hold_in_ns;
+ int8_t address_setup_in_ns;
+ int8_t gpmi_sample_delay_in_ns;
+ int8_t tREA_in_ns;
+ int8_t tRLOH_in_ns;
+ int8_t tRHOH_in_ns;
+};
+
+enum gpmi_type {
+ IS_MX23,
+ IS_MX28,
+ IS_MX6Q,
+ IS_MX6SX
+};
+
+struct gpmi_devdata {
+ enum gpmi_type type;
+ int bch_max_ecc_strength;
+ int max_chain_delay; /* See the async EDO mode */
+};
+
+struct gpmi_nand_data {
+ /* flags */
+#define GPMI_ASYNC_EDO_ENABLED (1 << 0)
+#define GPMI_TIMING_INIT_OK (1 << 1)
+ int flags;
+ const struct gpmi_devdata *devdata;
+
+ /* System Interface */
+ struct device *dev;
+ struct platform_device *pdev;
+
+ /* Resources */
+ struct resources resources;
+
+ /* Flash Hardware */
+ struct nand_timing timing;
+ int timing_mode;
+
+ /* BCH */
+ struct bch_geometry bch_geometry;
+ struct completion bch_done;
+
+ /* NAND Boot issue */
+ bool swap_block_mark;
+ struct boot_rom_geometry rom_geometry;
+
+ /* MTD / NAND */
+ struct nand_chip nand;
+ struct mtd_info mtd;
+
+ /* General-use Variables */
+ int current_chip;
+ unsigned int command_length;
+
+ /* passed from upper layer */
+ uint8_t *upper_buf;
+ int upper_len;
+
+ /* for DMA operations */
+ bool direct_dma_map_ok;
+
+ struct scatterlist cmd_sgl;
+ char *cmd_buffer;
+
+ struct scatterlist data_sgl;
+ char *data_buffer_dma;
+
+ void *page_buffer_virt;
+ dma_addr_t page_buffer_phys;
+ unsigned int page_buffer_size;
+
+ void *payload_virt;
+ dma_addr_t payload_phys;
+
+ void *auxiliary_virt;
+ dma_addr_t auxiliary_phys;
+
+ void *raw_buffer;
+
+ /* DMA channels */
+#define DMA_CHANS 8
+ struct dma_chan *dma_chans[DMA_CHANS];
+ enum dma_ops_type last_dma_type;
+ enum dma_ops_type dma_type;
+ struct completion dma_done;
+
+ /* private */
+ void *private;
+};
+
+/**
+ * struct gpmi_nfc_hardware_timing - GPMI hardware timing parameters.
+ * @data_setup_in_cycles: The data setup time, in cycles.
+ * @data_hold_in_cycles: The data hold time, in cycles.
+ * @address_setup_in_cycles: The address setup time, in cycles.
+ * @device_busy_timeout: The timeout waiting for NAND Ready/Busy,
+ * this value is the number of cycles multiplied
+ * by 4096.
+ * @use_half_periods: Indicates the clock is running slowly, so the
+ * NFC DLL should use half-periods.
+ * @sample_delay_factor: The sample delay factor.
+ * @wrn_dly_sel: The delay on the GPMI write strobe.
+ */
+struct gpmi_nfc_hardware_timing {
+ /* for HW_GPMI_TIMING0 */
+ uint8_t data_setup_in_cycles;
+ uint8_t data_hold_in_cycles;
+ uint8_t address_setup_in_cycles;
+
+ /* for HW_GPMI_TIMING1 */
+ uint16_t device_busy_timeout;
+#define GPMI_DEFAULT_BUSY_TIMEOUT 0x500 /* default busy timeout value.*/
+
+ /* for HW_GPMI_CTRL1 */
+ bool use_half_periods;
+ uint8_t sample_delay_factor;
+ uint8_t wrn_dly_sel;
+};
+
+/**
+ * struct timing_threshod - Timing threshold
+ * @max_data_setup_cycles: The maximum number of data setup cycles that
+ * can be expressed in the hardware.
+ * @internal_data_setup_in_ns: The time, in ns, that the NFC hardware requires
+ * for data read internal setup. In the Reference
+ * Manual, see the chapter "High-Speed NAND
+ * Timing" for more details.
+ * @max_sample_delay_factor: The maximum sample delay factor that can be
+ * expressed in the hardware.
+ * @max_dll_clock_period_in_ns: The maximum period of the GPMI clock that the
+ * sample delay DLL hardware can possibly work
+ * with (the DLL is unusable with longer periods).
+ * If the full-cycle period is greater than HALF
+ * this value, the DLL must be configured to use
+ * half-periods.
+ * @max_dll_delay_in_ns: The maximum amount of delay, in ns, that the
+ * DLL can implement.
+ * @clock_frequency_in_hz: The clock frequency, in Hz, during the current
+ * I/O transaction. If no I/O transaction is in
+ * progress, this is the clock frequency during
+ * the most recent I/O transaction.
+ */
+struct timing_threshod {
+ const unsigned int max_chip_count;
+ const unsigned int max_data_setup_cycles;
+ const unsigned int internal_data_setup_in_ns;
+ const unsigned int max_sample_delay_factor;
+ const unsigned int max_dll_clock_period_in_ns;
+ const unsigned int max_dll_delay_in_ns;
+ unsigned long clock_frequency_in_hz;
+
+};
+
+/* Common Services */
+extern int common_nfc_set_geometry(struct gpmi_nand_data *);
+extern struct dma_chan *get_dma_chan(struct gpmi_nand_data *);
+extern void prepare_data_dma(struct gpmi_nand_data *,
+ enum dma_data_direction dr);
+extern int start_dma_without_bch_irq(struct gpmi_nand_data *,
+ struct dma_async_tx_descriptor *);
+extern int start_dma_with_bch_irq(struct gpmi_nand_data *,
+ struct dma_async_tx_descriptor *);
+
+/* GPMI-NAND helper function library */
+extern int gpmi_init(struct gpmi_nand_data *);
+extern int gpmi_extra_init(struct gpmi_nand_data *);
+extern void gpmi_clear_bch(struct gpmi_nand_data *);
+extern void gpmi_dump_info(struct gpmi_nand_data *);
+extern int bch_set_geometry(struct gpmi_nand_data *);
+extern int gpmi_is_ready(struct gpmi_nand_data *, unsigned chip);
+extern int gpmi_send_command(struct gpmi_nand_data *);
+extern void gpmi_begin(struct gpmi_nand_data *);
+extern void gpmi_end(struct gpmi_nand_data *);
+extern int gpmi_read_data(struct gpmi_nand_data *);
+extern int gpmi_send_data(struct gpmi_nand_data *);
+extern int gpmi_send_page(struct gpmi_nand_data *,
+ dma_addr_t payload, dma_addr_t auxiliary);
+extern int gpmi_read_page(struct gpmi_nand_data *,
+ dma_addr_t payload, dma_addr_t auxiliary);
+
+void gpmi_copy_bits(u8 *dst, size_t dst_bit_off,
+ const u8 *src, size_t src_bit_off,
+ size_t nbits);
+
+/* BCH : Status Block Completion Codes */
+#define STATUS_GOOD 0x00
+#define STATUS_ERASED 0xff
+#define STATUS_UNCORRECTABLE 0xfe
+
+/* Use the devdata to distinguish different Archs. */
+#define GPMI_IS_MX23(x) ((x)->devdata->type == IS_MX23)
+#define GPMI_IS_MX28(x) ((x)->devdata->type == IS_MX28)
+#define GPMI_IS_MX6Q(x) ((x)->devdata->type == IS_MX6Q)
+#define GPMI_IS_MX6SX(x) ((x)->devdata->type == IS_MX6SX)
+
+#define GPMI_IS_MX6(x) (GPMI_IS_MX6Q(x) || GPMI_IS_MX6SX(x))
+#endif
diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
new file mode 100644
index 0000000..82114cd
--- /dev/null
+++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h
@@ -0,0 +1,187 @@
+/*
+ * Freescale GPMI NAND Flash Driver
+ *
+ * Copyright 2008-2011 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+#ifndef __GPMI_NAND_GPMI_REGS_H
+#define __GPMI_NAND_GPMI_REGS_H
+
+#define HW_GPMI_CTRL0 0x00000000
+#define HW_GPMI_CTRL0_SET 0x00000004
+#define HW_GPMI_CTRL0_CLR 0x00000008
+#define HW_GPMI_CTRL0_TOG 0x0000000c
+
+#define BP_GPMI_CTRL0_COMMAND_MODE 24
+#define BM_GPMI_CTRL0_COMMAND_MODE (3 << BP_GPMI_CTRL0_COMMAND_MODE)
+#define BF_GPMI_CTRL0_COMMAND_MODE(v) \
+ (((v) << BP_GPMI_CTRL0_COMMAND_MODE) & BM_GPMI_CTRL0_COMMAND_MODE)
+#define BV_GPMI_CTRL0_COMMAND_MODE__WRITE 0x0
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ 0x1
+#define BV_GPMI_CTRL0_COMMAND_MODE__READ_AND_COMPARE 0x2
+#define BV_GPMI_CTRL0_COMMAND_MODE__WAIT_FOR_READY 0x3
+
+#define BM_GPMI_CTRL0_WORD_LENGTH (1 << 23)
+#define BV_GPMI_CTRL0_WORD_LENGTH__16_BIT 0x0
+#define BV_GPMI_CTRL0_WORD_LENGTH__8_BIT 0x1
+
+/*
+ * Difference in LOCK_CS between imx23 and imx28 :
+ * This bit may impact the _POWER_ consumption. So some chips
+ * do not set it.
+ */
+#define MX23_BP_GPMI_CTRL0_LOCK_CS 22
+#define MX28_BP_GPMI_CTRL0_LOCK_CS 27
+#define LOCK_CS_ENABLE 0x1
+#define BF_GPMI_CTRL0_LOCK_CS(v, x) 0x0
+
+/* Difference in CS between imx23 and imx28 */
+#define BP_GPMI_CTRL0_CS 20
+#define MX23_BM_GPMI_CTRL0_CS (3 << BP_GPMI_CTRL0_CS)
+#define MX28_BM_GPMI_CTRL0_CS (7 << BP_GPMI_CTRL0_CS)
+#define BF_GPMI_CTRL0_CS(v, x) (((v) << BP_GPMI_CTRL0_CS) & \
+ (GPMI_IS_MX23((x)) \
+ ? MX23_BM_GPMI_CTRL0_CS \
+ : MX28_BM_GPMI_CTRL0_CS))
+
+#define BP_GPMI_CTRL0_ADDRESS 17
+#define BM_GPMI_CTRL0_ADDRESS (3 << BP_GPMI_CTRL0_ADDRESS)
+#define BF_GPMI_CTRL0_ADDRESS(v) \
+ (((v) << BP_GPMI_CTRL0_ADDRESS) & BM_GPMI_CTRL0_ADDRESS)
+#define BV_GPMI_CTRL0_ADDRESS__NAND_DATA 0x0
+#define BV_GPMI_CTRL0_ADDRESS__NAND_CLE 0x1
+#define BV_GPMI_CTRL0_ADDRESS__NAND_ALE 0x2
+
+#define BM_GPMI_CTRL0_ADDRESS_INCREMENT (1 << 16)
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__DISABLED 0x0
+#define BV_GPMI_CTRL0_ADDRESS_INCREMENT__ENABLED 0x1
+
+#define BP_GPMI_CTRL0_XFER_COUNT 0
+#define BM_GPMI_CTRL0_XFER_COUNT (0xffff << BP_GPMI_CTRL0_XFER_COUNT)
+#define BF_GPMI_CTRL0_XFER_COUNT(v) \
+ (((v) << BP_GPMI_CTRL0_XFER_COUNT) & BM_GPMI_CTRL0_XFER_COUNT)
+
+#define HW_GPMI_COMPARE 0x00000010
+
+#define HW_GPMI_ECCCTRL 0x00000020
+#define HW_GPMI_ECCCTRL_SET 0x00000024
+#define HW_GPMI_ECCCTRL_CLR 0x00000028
+#define HW_GPMI_ECCCTRL_TOG 0x0000002c
+
+#define BP_GPMI_ECCCTRL_ECC_CMD 13
+#define BM_GPMI_ECCCTRL_ECC_CMD (3 << BP_GPMI_ECCCTRL_ECC_CMD)
+#define BF_GPMI_ECCCTRL_ECC_CMD(v) \
+ (((v) << BP_GPMI_ECCCTRL_ECC_CMD) & BM_GPMI_ECCCTRL_ECC_CMD)
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_DECODE 0x0
+#define BV_GPMI_ECCCTRL_ECC_CMD__BCH_ENCODE 0x1
+
+#define BM_GPMI_ECCCTRL_ENABLE_ECC (1 << 12)
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__ENABLE 0x1
+#define BV_GPMI_ECCCTRL_ENABLE_ECC__DISABLE 0x0
+
+#define BP_GPMI_ECCCTRL_BUFFER_MASK 0
+#define BM_GPMI_ECCCTRL_BUFFER_MASK (0x1ff << BP_GPMI_ECCCTRL_BUFFER_MASK)
+#define BF_GPMI_ECCCTRL_BUFFER_MASK(v) \
+ (((v) << BP_GPMI_ECCCTRL_BUFFER_MASK) & BM_GPMI_ECCCTRL_BUFFER_MASK)
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_AUXONLY 0x100
+#define BV_GPMI_ECCCTRL_BUFFER_MASK__BCH_PAGE 0x1FF
+
+#define HW_GPMI_ECCCOUNT 0x00000030
+#define HW_GPMI_PAYLOAD 0x00000040
+#define HW_GPMI_AUXILIARY 0x00000050
+#define HW_GPMI_CTRL1 0x00000060
+#define HW_GPMI_CTRL1_SET 0x00000064
+#define HW_GPMI_CTRL1_CLR 0x00000068
+#define HW_GPMI_CTRL1_TOG 0x0000006c
+
+#define BP_GPMI_CTRL1_DECOUPLE_CS 24
+#define BM_GPMI_CTRL1_DECOUPLE_CS (1 << BP_GPMI_CTRL1_DECOUPLE_CS)
+
+#define BP_GPMI_CTRL1_WRN_DLY_SEL 22
+#define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL)
+#define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \
+ (((v) << BP_GPMI_CTRL1_WRN_DLY_SEL) & BM_GPMI_CTRL1_WRN_DLY_SEL)
+#define BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS 0x0
+#define BV_GPMI_CTRL1_WRN_DLY_SEL_6_TO_10NS 0x1
+#define BV_GPMI_CTRL1_WRN_DLY_SEL_7_TO_12NS 0x2
+#define BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY 0x3
+
+#define BM_GPMI_CTRL1_BCH_MODE (1 << 18)
+
+#define BP_GPMI_CTRL1_DLL_ENABLE 17
+#define BM_GPMI_CTRL1_DLL_ENABLE (1 << BP_GPMI_CTRL1_DLL_ENABLE)
+
+#define BP_GPMI_CTRL1_HALF_PERIOD 16
+#define BM_GPMI_CTRL1_HALF_PERIOD (1 << BP_GPMI_CTRL1_HALF_PERIOD)
+
+#define BP_GPMI_CTRL1_RDN_DELAY 12
+#define BM_GPMI_CTRL1_RDN_DELAY (0xf << BP_GPMI_CTRL1_RDN_DELAY)
+#define BF_GPMI_CTRL1_RDN_DELAY(v) \
+ (((v) << BP_GPMI_CTRL1_RDN_DELAY) & BM_GPMI_CTRL1_RDN_DELAY)
+
+#define BM_GPMI_CTRL1_DEV_RESET (1 << 3)
+#define BV_GPMI_CTRL1_DEV_RESET__ENABLED 0x0
+#define BV_GPMI_CTRL1_DEV_RESET__DISABLED 0x1
+
+#define BM_GPMI_CTRL1_ATA_IRQRDY_POLARITY (1 << 2)
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVELOW 0x0
+#define BV_GPMI_CTRL1_ATA_IRQRDY_POLARITY__ACTIVEHIGH 0x1
+
+#define BM_GPMI_CTRL1_CAMERA_MODE (1 << 1)
+#define BV_GPMI_CTRL1_GPMI_MODE__NAND 0x0
+#define BV_GPMI_CTRL1_GPMI_MODE__ATA 0x1
+
+#define BM_GPMI_CTRL1_GPMI_MODE (1 << 0)
+
+#define HW_GPMI_TIMING0 0x00000070
+
+#define BP_GPMI_TIMING0_ADDRESS_SETUP 16
+#define BM_GPMI_TIMING0_ADDRESS_SETUP (0xff << BP_GPMI_TIMING0_ADDRESS_SETUP)
+#define BF_GPMI_TIMING0_ADDRESS_SETUP(v) \
+ (((v) << BP_GPMI_TIMING0_ADDRESS_SETUP) & BM_GPMI_TIMING0_ADDRESS_SETUP)
+
+#define BP_GPMI_TIMING0_DATA_HOLD 8
+#define BM_GPMI_TIMING0_DATA_HOLD (0xff << BP_GPMI_TIMING0_DATA_HOLD)
+#define BF_GPMI_TIMING0_DATA_HOLD(v) \
+ (((v) << BP_GPMI_TIMING0_DATA_HOLD) & BM_GPMI_TIMING0_DATA_HOLD)
+
+#define BP_GPMI_TIMING0_DATA_SETUP 0
+#define BM_GPMI_TIMING0_DATA_SETUP (0xff << BP_GPMI_TIMING0_DATA_SETUP)
+#define BF_GPMI_TIMING0_DATA_SETUP(v) \
+ (((v) << BP_GPMI_TIMING0_DATA_SETUP) & BM_GPMI_TIMING0_DATA_SETUP)
+
+#define HW_GPMI_TIMING1 0x00000080
+#define BP_GPMI_TIMING1_BUSY_TIMEOUT 16
+#define BM_GPMI_TIMING1_BUSY_TIMEOUT (0xffff << BP_GPMI_TIMING1_BUSY_TIMEOUT)
+#define BF_GPMI_TIMING1_BUSY_TIMEOUT(v) \
+ (((v) << BP_GPMI_TIMING1_BUSY_TIMEOUT) & BM_GPMI_TIMING1_BUSY_TIMEOUT)
+
+#define HW_GPMI_TIMING2 0x00000090
+#define HW_GPMI_DATA 0x000000a0
+
+/* MX28 uses this to detect READY. */
+#define HW_GPMI_STAT 0x000000b0
+#define MX28_BP_GPMI_STAT_READY_BUSY 24
+#define MX28_BM_GPMI_STAT_READY_BUSY (0xff << MX28_BP_GPMI_STAT_READY_BUSY)
+#define MX28_BF_GPMI_STAT_READY_BUSY(v) \
+ (((v) << MX28_BP_GPMI_STAT_READY_BUSY) & MX28_BM_GPMI_STAT_READY_BUSY)
+
+/* MX23 uses this to detect READY. */
+#define HW_GPMI_DEBUG 0x000000c0
+#define MX23_BP_GPMI_DEBUG_READY0 28
+#define MX23_BM_GPMI_DEBUG_READY0 (1 << MX23_BP_GPMI_DEBUG_READY0)
+#endif
diff --git a/drivers/mtd/nand/hisi504_nand.c b/drivers/mtd/nand/hisi504_nand.c
new file mode 100644
index 0000000..0cb2e88
--- /dev/null
+++ b/drivers/mtd/nand/hisi504_nand.c
@@ -0,0 +1,890 @@
+/*
+ * Hisilicon NAND Flash controller driver
+ *
+ * Copyright © 2012-2014 HiSilicon Technologies Co., Ltd.
+ * http://www.hisilicon.com
+ *
+ * Author: Zhou Wang <wangzhou.bry@gmail.com>
+ * The initial developer of the original code is Zhiyong Cai
+ * <caizhiyong@huawei.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/mtd/mtd.h>
+#include <linux/sizes.h>
+#include <linux/clk.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/mtd/nand.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+
+#define HINFC504_MAX_CHIP (4)
+#define HINFC504_W_LATCH (5)
+#define HINFC504_R_LATCH (7)
+#define HINFC504_RW_LATCH (3)
+
+#define HINFC504_NFC_TIMEOUT (2 * HZ)
+#define HINFC504_NFC_PM_TIMEOUT (1 * HZ)
+#define HINFC504_NFC_DMA_TIMEOUT (5 * HZ)
+#define HINFC504_CHIP_DELAY (25)
+
+#define HINFC504_REG_BASE_ADDRESS_LEN (0x100)
+#define HINFC504_BUFFER_BASE_ADDRESS_LEN (2048 + 128)
+
+#define HINFC504_ADDR_CYCLE_MASK 0x4
+
+#define HINFC504_CON 0x00
+#define HINFC504_CON_OP_MODE_NORMAL BIT(0)
+#define HINFC504_CON_PAGEISZE_SHIFT (1)
+#define HINFC504_CON_PAGESIZE_MASK (0x07)
+#define HINFC504_CON_BUS_WIDTH BIT(4)
+#define HINFC504_CON_READY_BUSY_SEL BIT(8)
+#define HINFC504_CON_ECCTYPE_SHIFT (9)
+#define HINFC504_CON_ECCTYPE_MASK (0x07)
+
+#define HINFC504_PWIDTH 0x04
+#define SET_HINFC504_PWIDTH(_w_lcnt, _r_lcnt, _rw_hcnt) \
+ ((_w_lcnt) | (((_r_lcnt) & 0x0F) << 4) | (((_rw_hcnt) & 0x0F) << 8))
+
+#define HINFC504_CMD 0x0C
+#define HINFC504_ADDRL 0x10
+#define HINFC504_ADDRH 0x14
+#define HINFC504_DATA_NUM 0x18
+
+#define HINFC504_OP 0x1C
+#define HINFC504_OP_READ_DATA_EN BIT(1)
+#define HINFC504_OP_WAIT_READY_EN BIT(2)
+#define HINFC504_OP_CMD2_EN BIT(3)
+#define HINFC504_OP_WRITE_DATA_EN BIT(4)
+#define HINFC504_OP_ADDR_EN BIT(5)
+#define HINFC504_OP_CMD1_EN BIT(6)
+#define HINFC504_OP_NF_CS_SHIFT (7)
+#define HINFC504_OP_NF_CS_MASK (3)
+#define HINFC504_OP_ADDR_CYCLE_SHIFT (9)
+#define HINFC504_OP_ADDR_CYCLE_MASK (7)
+
+#define HINFC504_STATUS 0x20
+#define HINFC504_READY BIT(0)
+
+#define HINFC504_INTEN 0x24
+#define HINFC504_INTEN_DMA BIT(9)
+#define HINFC504_INTEN_UE BIT(6)
+#define HINFC504_INTEN_CE BIT(5)
+
+#define HINFC504_INTS 0x28
+#define HINFC504_INTS_DMA BIT(9)
+#define HINFC504_INTS_UE BIT(6)
+#define HINFC504_INTS_CE BIT(5)
+
+#define HINFC504_INTCLR 0x2C
+#define HINFC504_INTCLR_DMA BIT(9)
+#define HINFC504_INTCLR_UE BIT(6)
+#define HINFC504_INTCLR_CE BIT(5)
+
+#define HINFC504_ECC_STATUS 0x5C
+#define HINFC504_ECC_16_BIT_SHIFT 12
+
+#define HINFC504_DMA_CTRL 0x60
+#define HINFC504_DMA_CTRL_DMA_START BIT(0)
+#define HINFC504_DMA_CTRL_WE BIT(1)
+#define HINFC504_DMA_CTRL_DATA_AREA_EN BIT(2)
+#define HINFC504_DMA_CTRL_OOB_AREA_EN BIT(3)
+#define HINFC504_DMA_CTRL_BURST4_EN BIT(4)
+#define HINFC504_DMA_CTRL_BURST8_EN BIT(5)
+#define HINFC504_DMA_CTRL_BURST16_EN BIT(6)
+#define HINFC504_DMA_CTRL_ADDR_NUM_SHIFT (7)
+#define HINFC504_DMA_CTRL_ADDR_NUM_MASK (1)
+#define HINFC504_DMA_CTRL_CS_SHIFT (8)
+#define HINFC504_DMA_CTRL_CS_MASK (0x03)
+
+#define HINFC504_DMA_ADDR_DATA 0x64
+#define HINFC504_DMA_ADDR_OOB 0x68
+
+#define HINFC504_DMA_LEN 0x6C
+#define HINFC504_DMA_LEN_OOB_SHIFT (16)
+#define HINFC504_DMA_LEN_OOB_MASK (0xFFF)
+
+#define HINFC504_DMA_PARA 0x70
+#define HINFC504_DMA_PARA_DATA_RW_EN BIT(0)
+#define HINFC504_DMA_PARA_OOB_RW_EN BIT(1)
+#define HINFC504_DMA_PARA_DATA_EDC_EN BIT(2)
+#define HINFC504_DMA_PARA_OOB_EDC_EN BIT(3)
+#define HINFC504_DMA_PARA_DATA_ECC_EN BIT(4)
+#define HINFC504_DMA_PARA_OOB_ECC_EN BIT(5)
+
+#define HINFC_VERSION 0x74
+#define HINFC504_LOG_READ_ADDR 0x7C
+#define HINFC504_LOG_READ_LEN 0x80
+
+#define HINFC504_NANDINFO_LEN 0x10
+
+struct hinfc_host {
+ struct nand_chip chip;
+ struct mtd_info mtd;
+ struct device *dev;
+ void __iomem *iobase;
+ void __iomem *mmio;
+ struct completion cmd_complete;
+ unsigned int offset;
+ unsigned int command;
+ int chipselect;
+ unsigned int addr_cycle;
+ u32 addr_value[2];
+ u32 cache_addr_value[2];
+ char *buffer;
+ dma_addr_t dma_buffer;
+ dma_addr_t dma_oob;
+ int version;
+ unsigned int irq_status; /* interrupt status */
+};
+
+static inline unsigned int hinfc_read(struct hinfc_host *host, unsigned int reg)
+{
+ return readl(host->iobase + reg);
+}
+
+static inline void hinfc_write(struct hinfc_host *host, unsigned int value,
+ unsigned int reg)
+{
+ writel(value, host->iobase + reg);
+}
+
+static void wait_controller_finished(struct hinfc_host *host)
+{
+ unsigned long timeout = jiffies + HINFC504_NFC_TIMEOUT;
+ int val;
+
+ while (time_before(jiffies, timeout)) {
+ val = hinfc_read(host, HINFC504_STATUS);
+ if (host->command == NAND_CMD_ERASE2) {
+ /* nfc is ready */
+ while (!(val & HINFC504_READY)) {
+ usleep_range(500, 1000);
+ val = hinfc_read(host, HINFC504_STATUS);
+ }
+ return;
+ }
+
+ if (val & HINFC504_READY)
+ return;
+ }
+
+ /* wait cmd timeout */
+ dev_err(host->dev, "Wait NAND controller exec cmd timeout.\n");
+}
+
+static void hisi_nfc_dma_transfer(struct hinfc_host *host, int todev)
+{
+ struct mtd_info *mtd = &host->mtd;
+ struct nand_chip *chip = mtd->priv;
+ unsigned long val;
+ int ret;
+
+ hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA);
+ hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB);
+
+ if (chip->ecc.mode == NAND_ECC_NONE) {
+ hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK)
+ << HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN);
+
+ hinfc_write(host, HINFC504_DMA_PARA_DATA_RW_EN
+ | HINFC504_DMA_PARA_OOB_RW_EN, HINFC504_DMA_PARA);
+ } else {
+ if (host->command == NAND_CMD_READOOB)
+ hinfc_write(host, HINFC504_DMA_PARA_OOB_RW_EN
+ | HINFC504_DMA_PARA_OOB_EDC_EN
+ | HINFC504_DMA_PARA_OOB_ECC_EN, HINFC504_DMA_PARA);
+ else
+ hinfc_write(host, HINFC504_DMA_PARA_DATA_RW_EN
+ | HINFC504_DMA_PARA_OOB_RW_EN
+ | HINFC504_DMA_PARA_DATA_EDC_EN
+ | HINFC504_DMA_PARA_OOB_EDC_EN
+ | HINFC504_DMA_PARA_DATA_ECC_EN
+ | HINFC504_DMA_PARA_OOB_ECC_EN, HINFC504_DMA_PARA);
+
+ }
+
+ val = (HINFC504_DMA_CTRL_DMA_START | HINFC504_DMA_CTRL_BURST4_EN
+ | HINFC504_DMA_CTRL_BURST8_EN | HINFC504_DMA_CTRL_BURST16_EN
+ | HINFC504_DMA_CTRL_DATA_AREA_EN | HINFC504_DMA_CTRL_OOB_AREA_EN
+ | ((host->addr_cycle == 4 ? 1 : 0)
+ << HINFC504_DMA_CTRL_ADDR_NUM_SHIFT)
+ | ((host->chipselect & HINFC504_DMA_CTRL_CS_MASK)
+ << HINFC504_DMA_CTRL_CS_SHIFT));
+
+ if (todev)
+ val |= HINFC504_DMA_CTRL_WE;
+
+ init_completion(&host->cmd_complete);
+
+ hinfc_write(host, val, HINFC504_DMA_CTRL);
+ ret = wait_for_completion_timeout(&host->cmd_complete,
+ HINFC504_NFC_DMA_TIMEOUT);
+
+ if (!ret) {
+ dev_err(host->dev, "DMA operation(irq) timeout!\n");
+ /* sanity check */
+ val = hinfc_read(host, HINFC504_DMA_CTRL);
+ if (!(val & HINFC504_DMA_CTRL_DMA_START))
+ dev_err(host->dev, "DMA is already done but without irq ACK!\n");
+ else
+ dev_err(host->dev, "DMA is really timeout!\n");
+ }
+}
+
+static int hisi_nfc_send_cmd_pageprog(struct hinfc_host *host)
+{
+ host->addr_value[0] &= 0xffff0000;
+
+ hinfc_write(host, host->addr_value[0], HINFC504_ADDRL);
+ hinfc_write(host, host->addr_value[1], HINFC504_ADDRH);
+ hinfc_write(host, NAND_CMD_PAGEPROG << 8 | NAND_CMD_SEQIN,
+ HINFC504_CMD);
+
+ hisi_nfc_dma_transfer(host, 1);
+
+ return 0;
+}
+
+static int hisi_nfc_send_cmd_readstart(struct hinfc_host *host)
+{
+ struct mtd_info *mtd = &host->mtd;
+
+ if ((host->addr_value[0] == host->cache_addr_value[0]) &&
+ (host->addr_value[1] == host->cache_addr_value[1]))
+ return 0;
+
+ host->addr_value[0] &= 0xffff0000;
+
+ hinfc_write(host, host->addr_value[0], HINFC504_ADDRL);
+ hinfc_write(host, host->addr_value[1], HINFC504_ADDRH);
+ hinfc_write(host, NAND_CMD_READSTART << 8 | NAND_CMD_READ0,
+ HINFC504_CMD);
+
+ hinfc_write(host, 0, HINFC504_LOG_READ_ADDR);
+ hinfc_write(host, mtd->writesize + mtd->oobsize,
+ HINFC504_LOG_READ_LEN);
+
+ hisi_nfc_dma_transfer(host, 0);
+
+ host->cache_addr_value[0] = host->addr_value[0];
+ host->cache_addr_value[1] = host->addr_value[1];
+
+ return 0;
+}
+
+static int hisi_nfc_send_cmd_erase(struct hinfc_host *host)
+{
+ hinfc_write(host, host->addr_value[0], HINFC504_ADDRL);
+ hinfc_write(host, (NAND_CMD_ERASE2 << 8) | NAND_CMD_ERASE1,
+ HINFC504_CMD);
+
+ hinfc_write(host, HINFC504_OP_WAIT_READY_EN
+ | HINFC504_OP_CMD2_EN
+ | HINFC504_OP_CMD1_EN
+ | HINFC504_OP_ADDR_EN
+ | ((host->chipselect & HINFC504_OP_NF_CS_MASK)
+ << HINFC504_OP_NF_CS_SHIFT)
+ | ((host->addr_cycle & HINFC504_OP_ADDR_CYCLE_MASK)
+ << HINFC504_OP_ADDR_CYCLE_SHIFT),
+ HINFC504_OP);
+
+ wait_controller_finished(host);
+
+ return 0;
+}
+
+static int hisi_nfc_send_cmd_readid(struct hinfc_host *host)
+{
+ hinfc_write(host, HINFC504_NANDINFO_LEN, HINFC504_DATA_NUM);
+ hinfc_write(host, NAND_CMD_READID, HINFC504_CMD);
+ hinfc_write(host, 0, HINFC504_ADDRL);
+
+ hinfc_write(host, HINFC504_OP_CMD1_EN | HINFC504_OP_ADDR_EN
+ | HINFC504_OP_READ_DATA_EN
+ | ((host->chipselect & HINFC504_OP_NF_CS_MASK)
+ << HINFC504_OP_NF_CS_SHIFT)
+ | 1 << HINFC504_OP_ADDR_CYCLE_SHIFT, HINFC504_OP);
+
+ wait_controller_finished(host);
+
+ return 0;
+}
+
+static int hisi_nfc_send_cmd_status(struct hinfc_host *host)
+{
+ hinfc_write(host, HINFC504_NANDINFO_LEN, HINFC504_DATA_NUM);
+ hinfc_write(host, NAND_CMD_STATUS, HINFC504_CMD);
+ hinfc_write(host, HINFC504_OP_CMD1_EN
+ | HINFC504_OP_READ_DATA_EN
+ | ((host->chipselect & HINFC504_OP_NF_CS_MASK)
+ << HINFC504_OP_NF_CS_SHIFT),
+ HINFC504_OP);
+
+ wait_controller_finished(host);
+
+ return 0;
+}
+
+static int hisi_nfc_send_cmd_reset(struct hinfc_host *host, int chipselect)
+{
+ hinfc_write(host, NAND_CMD_RESET, HINFC504_CMD);
+
+ hinfc_write(host, HINFC504_OP_CMD1_EN
+ | ((chipselect & HINFC504_OP_NF_CS_MASK)
+ << HINFC504_OP_NF_CS_SHIFT)
+ | HINFC504_OP_WAIT_READY_EN,
+ HINFC504_OP);
+
+ wait_controller_finished(host);
+
+ return 0;
+}
+
+static void hisi_nfc_select_chip(struct mtd_info *mtd, int chipselect)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct hinfc_host *host = chip->priv;
+
+ if (chipselect < 0)
+ return;
+
+ host->chipselect = chipselect;
+}
+
+static uint8_t hisi_nfc_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct hinfc_host *host = chip->priv;
+
+ if (host->command == NAND_CMD_STATUS)
+ return *(uint8_t *)(host->mmio);
+
+ host->offset++;
+
+ if (host->command == NAND_CMD_READID)
+ return *(uint8_t *)(host->mmio + host->offset - 1);
+
+ return *(uint8_t *)(host->buffer + host->offset - 1);
+}
+
+static u16 hisi_nfc_read_word(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct hinfc_host *host = chip->priv;
+
+ host->offset += 2;
+ return *(u16 *)(host->buffer + host->offset - 2);
+}
+
+static void
+hisi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct hinfc_host *host = chip->priv;
+
+ memcpy(host->buffer + host->offset, buf, len);
+ host->offset += len;
+}
+
+static void hisi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct hinfc_host *host = chip->priv;
+
+ memcpy(buf, host->buffer + host->offset, len);
+ host->offset += len;
+}
+
+static void set_addr(struct mtd_info *mtd, int column, int page_addr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct hinfc_host *host = chip->priv;
+ unsigned int command = host->command;
+
+ host->addr_cycle = 0;
+ host->addr_value[0] = 0;
+ host->addr_value[1] = 0;
+
+ /* Serially input address */
+ if (column != -1) {
+ /* Adjust columns for 16 bit buswidth */
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
+ column >>= 1;
+
+ host->addr_value[0] = column & 0xffff;
+ host->addr_cycle = 2;
+ }
+ if (page_addr != -1) {
+ host->addr_value[0] |= (page_addr & 0xffff)
+ << (host->addr_cycle * 8);
+ host->addr_cycle += 2;
+ /* One more address cycle for devices > 128MiB */
+ if (chip->chipsize > (128 << 20)) {
+ host->addr_cycle += 1;
+ if (host->command == NAND_CMD_ERASE1)
+ host->addr_value[0] |= ((page_addr >> 16) & 0xff) << 16;
+ else
+ host->addr_value[1] |= ((page_addr >> 16) & 0xff);
+ }
+ }
+}
+
+static void hisi_nfc_cmdfunc(struct mtd_info *mtd, unsigned command, int column,
+ int page_addr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct hinfc_host *host = chip->priv;
+ int is_cache_invalid = 1;
+ unsigned int flag = 0;
+
+ host->command = command;
+
+ switch (command) {
+ case NAND_CMD_READ0:
+ case NAND_CMD_READOOB:
+ if (command == NAND_CMD_READ0)
+ host->offset = column;
+ else
+ host->offset = column + mtd->writesize;
+
+ is_cache_invalid = 0;
+ set_addr(mtd, column, page_addr);
+ hisi_nfc_send_cmd_readstart(host);
+ break;
+
+ case NAND_CMD_SEQIN:
+ host->offset = column;
+ set_addr(mtd, column, page_addr);
+ break;
+
+ case NAND_CMD_ERASE1:
+ set_addr(mtd, column, page_addr);
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ hisi_nfc_send_cmd_pageprog(host);
+ break;
+
+ case NAND_CMD_ERASE2:
+ hisi_nfc_send_cmd_erase(host);
+ break;
+
+ case NAND_CMD_READID:
+ host->offset = column;
+ memset(host->mmio, 0, 0x10);
+ hisi_nfc_send_cmd_readid(host);
+ break;
+
+ case NAND_CMD_STATUS:
+ flag = hinfc_read(host, HINFC504_CON);
+ if (chip->ecc.mode == NAND_ECC_HW)
+ hinfc_write(host,
+ flag & ~(HINFC504_CON_ECCTYPE_MASK <<
+ HINFC504_CON_ECCTYPE_SHIFT), HINFC504_CON);
+
+ host->offset = 0;
+ memset(host->mmio, 0, 0x10);
+ hisi_nfc_send_cmd_status(host);
+ hinfc_write(host, flag, HINFC504_CON);
+ break;
+
+ case NAND_CMD_RESET:
+ hisi_nfc_send_cmd_reset(host, host->chipselect);
+ break;
+
+ default:
+ dev_err(host->dev, "Error: unsupported cmd(cmd=%x, col=%x, page=%x)\n",
+ command, column, page_addr);
+ }
+
+ if (is_cache_invalid) {
+ host->cache_addr_value[0] = ~0;
+ host->cache_addr_value[1] = ~0;
+ }
+}
+
+static irqreturn_t hinfc_irq_handle(int irq, void *devid)
+{
+ struct hinfc_host *host = devid;
+ unsigned int flag;
+
+ flag = hinfc_read(host, HINFC504_INTS);
+ /* store interrupts state */
+ host->irq_status |= flag;
+
+ if (flag & HINFC504_INTS_DMA) {
+ hinfc_write(host, HINFC504_INTCLR_DMA, HINFC504_INTCLR);
+ complete(&host->cmd_complete);
+ } else if (flag & HINFC504_INTS_CE) {
+ hinfc_write(host, HINFC504_INTCLR_CE, HINFC504_INTCLR);
+ } else if (flag & HINFC504_INTS_UE) {
+ hinfc_write(host, HINFC504_INTCLR_UE, HINFC504_INTCLR);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int hisi_nand_read_page_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
+{
+ struct hinfc_host *host = chip->priv;
+ int max_bitflips = 0, stat = 0, stat_max = 0, status_ecc;
+ int stat_1, stat_2;
+
+ chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /* errors which can not be corrected by ECC */
+ if (host->irq_status & HINFC504_INTS_UE) {
+ mtd->ecc_stats.failed++;
+ } else if (host->irq_status & HINFC504_INTS_CE) {
+ /* TODO: need add other ECC modes! */
+ switch (chip->ecc.strength) {
+ case 16:
+ status_ecc = hinfc_read(host, HINFC504_ECC_STATUS) >>
+ HINFC504_ECC_16_BIT_SHIFT & 0x0fff;
+ stat_2 = status_ecc & 0x3f;
+ stat_1 = status_ecc >> 6 & 0x3f;
+ stat = stat_1 + stat_2;
+ stat_max = max_t(int, stat_1, stat_2);
+ }
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(int, max_bitflips, stat_max);
+ }
+ host->irq_status = 0;
+
+ return max_bitflips;
+}
+
+static int hisi_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct hinfc_host *host = chip->priv;
+
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ if (host->irq_status & HINFC504_INTS_UE) {
+ host->irq_status = 0;
+ return -EBADMSG;
+ }
+
+ host->irq_status = 0;
+ return 0;
+}
+
+static int hisi_nand_write_page_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int oob_required,
+ int page)
+{
+ chip->write_buf(mtd, buf, mtd->writesize);
+ if (oob_required)
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static void hisi_nfc_host_init(struct hinfc_host *host)
+{
+ struct nand_chip *chip = &host->chip;
+ unsigned int flag = 0;
+
+ host->version = hinfc_read(host, HINFC_VERSION);
+ host->addr_cycle = 0;
+ host->addr_value[0] = 0;
+ host->addr_value[1] = 0;
+ host->cache_addr_value[0] = ~0;
+ host->cache_addr_value[1] = ~0;
+ host->chipselect = 0;
+
+ /* default page size: 2K, ecc_none. need modify */
+ flag = HINFC504_CON_OP_MODE_NORMAL | HINFC504_CON_READY_BUSY_SEL
+ | ((0x001 & HINFC504_CON_PAGESIZE_MASK)
+ << HINFC504_CON_PAGEISZE_SHIFT)
+ | ((0x0 & HINFC504_CON_ECCTYPE_MASK)
+ << HINFC504_CON_ECCTYPE_SHIFT)
+ | ((chip->options & NAND_BUSWIDTH_16) ?
+ HINFC504_CON_BUS_WIDTH : 0);
+ hinfc_write(host, flag, HINFC504_CON);
+
+ memset(host->mmio, 0xff, HINFC504_BUFFER_BASE_ADDRESS_LEN);
+
+ hinfc_write(host, SET_HINFC504_PWIDTH(HINFC504_W_LATCH,
+ HINFC504_R_LATCH, HINFC504_RW_LATCH), HINFC504_PWIDTH);
+
+ /* enable DMA irq */
+ hinfc_write(host, HINFC504_INTEN_DMA, HINFC504_INTEN);
+}
+
+static struct nand_ecclayout nand_ecc_2K_16bits = {
+ .oobavail = 6,
+ .oobfree = { {2, 6} },
+};
+
+static int hisi_nfc_ecc_probe(struct hinfc_host *host)
+{
+ unsigned int flag;
+ int size, strength, ecc_bits;
+ struct device *dev = host->dev;
+ struct nand_chip *chip = &host->chip;
+ struct mtd_info *mtd = &host->mtd;
+ struct device_node *np = host->dev->of_node;
+
+ size = of_get_nand_ecc_step_size(np);
+ strength = of_get_nand_ecc_strength(np);
+ if (size != 1024) {
+ dev_err(dev, "error ecc size: %d\n", size);
+ return -EINVAL;
+ }
+
+ if ((size == 1024) && ((strength != 8) && (strength != 16) &&
+ (strength != 24) && (strength != 40))) {
+ dev_err(dev, "ecc size and strength do not match\n");
+ return -EINVAL;
+ }
+
+ chip->ecc.size = size;
+ chip->ecc.strength = strength;
+
+ chip->ecc.read_page = hisi_nand_read_page_hwecc;
+ chip->ecc.read_oob = hisi_nand_read_oob;
+ chip->ecc.write_page = hisi_nand_write_page_hwecc;
+
+ switch (chip->ecc.strength) {
+ case 16:
+ ecc_bits = 6;
+ if (mtd->writesize == 2048)
+ chip->ecc.layout = &nand_ecc_2K_16bits;
+
+ /* TODO: add more page size support */
+ break;
+
+ /* TODO: add more ecc strength support */
+ default:
+ dev_err(dev, "not support strength: %d\n", chip->ecc.strength);
+ return -EINVAL;
+ }
+
+ flag = hinfc_read(host, HINFC504_CON);
+ /* add ecc type configure */
+ flag |= ((ecc_bits & HINFC504_CON_ECCTYPE_MASK)
+ << HINFC504_CON_ECCTYPE_SHIFT);
+ hinfc_write(host, flag, HINFC504_CON);
+
+ /* enable ecc irq */
+ flag = hinfc_read(host, HINFC504_INTEN) & 0xfff;
+ hinfc_write(host, flag | HINFC504_INTEN_UE | HINFC504_INTEN_CE,
+ HINFC504_INTEN);
+
+ return 0;
+}
+
+static int hisi_nfc_probe(struct platform_device *pdev)
+{
+ int ret = 0, irq, buswidth, flag, max_chips = HINFC504_MAX_CHIP;
+ struct device *dev = &pdev->dev;
+ struct hinfc_host *host;
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
+ struct resource *res;
+ struct device_node *np = dev->of_node;
+ struct mtd_part_parser_data ppdata;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+ host->dev = dev;
+
+ platform_set_drvdata(pdev, host);
+ chip = &host->chip;
+ mtd = &host->mtd;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "no IRQ resource defined\n");
+ ret = -ENXIO;
+ goto err_res;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->iobase = devm_ioremap_resource(dev, res);
+ if (IS_ERR(host->iobase)) {
+ ret = PTR_ERR(host->iobase);
+ goto err_res;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ host->mmio = devm_ioremap_resource(dev, res);
+ if (IS_ERR(host->mmio)) {
+ ret = PTR_ERR(host->mmio);
+ dev_err(dev, "devm_ioremap_resource[1] fail\n");
+ goto err_res;
+ }
+
+ mtd->priv = chip;
+ mtd->name = "hisi_nand";
+ mtd->dev.parent = &pdev->dev;
+
+ chip->priv = host;
+ chip->cmdfunc = hisi_nfc_cmdfunc;
+ chip->select_chip = hisi_nfc_select_chip;
+ chip->read_byte = hisi_nfc_read_byte;
+ chip->read_word = hisi_nfc_read_word;
+ chip->write_buf = hisi_nfc_write_buf;
+ chip->read_buf = hisi_nfc_read_buf;
+ chip->chip_delay = HINFC504_CHIP_DELAY;
+
+ chip->ecc.mode = of_get_nand_ecc_mode(np);
+
+ buswidth = of_get_nand_bus_width(np);
+ if (buswidth == 16)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ hisi_nfc_host_init(host);
+
+ ret = devm_request_irq(dev, irq, hinfc_irq_handle, 0x0, "nandc", host);
+ if (ret) {
+ dev_err(dev, "failed to request IRQ\n");
+ goto err_res;
+ }
+
+ ret = nand_scan_ident(mtd, max_chips, NULL);
+ if (ret) {
+ ret = -ENODEV;
+ goto err_res;
+ }
+
+ host->buffer = dmam_alloc_coherent(dev, mtd->writesize + mtd->oobsize,
+ &host->dma_buffer, GFP_KERNEL);
+ if (!host->buffer) {
+ ret = -ENOMEM;
+ goto err_res;
+ }
+
+ host->dma_oob = host->dma_buffer + mtd->writesize;
+ memset(host->buffer, 0xff, mtd->writesize + mtd->oobsize);
+
+ flag = hinfc_read(host, HINFC504_CON);
+ flag &= ~(HINFC504_CON_PAGESIZE_MASK << HINFC504_CON_PAGEISZE_SHIFT);
+ switch (mtd->writesize) {
+ case 2048:
+ flag |= (0x001 << HINFC504_CON_PAGEISZE_SHIFT); break;
+ /*
+ * TODO: add more pagesize support,
+ * default pagesize has been set in hisi_nfc_host_init
+ */
+ default:
+ dev_err(dev, "NON-2KB page size nand flash\n");
+ ret = -EINVAL;
+ goto err_res;
+ }
+ hinfc_write(host, flag, HINFC504_CON);
+
+ if (chip->ecc.mode == NAND_ECC_HW)
+ hisi_nfc_ecc_probe(host);
+
+ ret = nand_scan_tail(mtd);
+ if (ret) {
+ dev_err(dev, "nand_scan_tail failed: %d\n", ret);
+ goto err_res;
+ }
+
+ ppdata.of_node = np;
+ ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+ if (ret) {
+ dev_err(dev, "Err MTD partition=%d\n", ret);
+ goto err_mtd;
+ }
+
+ return 0;
+
+err_mtd:
+ nand_release(mtd);
+err_res:
+ return ret;
+}
+
+static int hisi_nfc_remove(struct platform_device *pdev)
+{
+ struct hinfc_host *host = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = &host->mtd;
+
+ nand_release(mtd);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int hisi_nfc_suspend(struct device *dev)
+{
+ struct hinfc_host *host = dev_get_drvdata(dev);
+ unsigned long timeout = jiffies + HINFC504_NFC_PM_TIMEOUT;
+
+ while (time_before(jiffies, timeout)) {
+ if (((hinfc_read(host, HINFC504_STATUS) & 0x1) == 0x0) &&
+ (hinfc_read(host, HINFC504_DMA_CTRL) &
+ HINFC504_DMA_CTRL_DMA_START)) {
+ cond_resched();
+ return 0;
+ }
+ }
+
+ dev_err(host->dev, "nand controller suspend timeout.\n");
+
+ return -EAGAIN;
+}
+
+static int hisi_nfc_resume(struct device *dev)
+{
+ int cs;
+ struct hinfc_host *host = dev_get_drvdata(dev);
+ struct nand_chip *chip = &host->chip;
+
+ for (cs = 0; cs < chip->numchips; cs++)
+ hisi_nfc_send_cmd_reset(host, cs);
+ hinfc_write(host, SET_HINFC504_PWIDTH(HINFC504_W_LATCH,
+ HINFC504_R_LATCH, HINFC504_RW_LATCH), HINFC504_PWIDTH);
+
+ return 0;
+}
+#endif
+static SIMPLE_DEV_PM_OPS(hisi_nfc_pm_ops, hisi_nfc_suspend, hisi_nfc_resume);
+
+static const struct of_device_id nfc_id_table[] = {
+ { .compatible = "hisilicon,504-nfc" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, nfc_id_table);
+
+static struct platform_driver hisi_nfc_driver = {
+ .driver = {
+ .name = "hisi_nand",
+ .of_match_table = nfc_id_table,
+ .pm = &hisi_nfc_pm_ops,
+ },
+ .probe = hisi_nfc_probe,
+ .remove = hisi_nfc_remove,
+};
+
+module_platform_driver(hisi_nfc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Zhou Wang");
+MODULE_AUTHOR("Zhiyong Cai");
+MODULE_DESCRIPTION("Hisilicon Nand Flash Controller Driver");
diff --git a/drivers/mtd/nand/jz4740_nand.c b/drivers/mtd/nand/jz4740_nand.c
new file mode 100644
index 0000000..5a99a93
--- /dev/null
+++ b/drivers/mtd/nand/jz4740_nand.c
@@ -0,0 +1,580 @@
+/*
+ * Copyright (C) 2009-2010, Lars-Peter Clausen <lars@metafoo.de>
+ * JZ4740 SoC NAND controller driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/ioport.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/gpio.h>
+
+#include <asm/mach-jz4740/gpio.h>
+#include <asm/mach-jz4740/jz4740_nand.h>
+
+#define JZ_REG_NAND_CTRL 0x50
+#define JZ_REG_NAND_ECC_CTRL 0x100
+#define JZ_REG_NAND_DATA 0x104
+#define JZ_REG_NAND_PAR0 0x108
+#define JZ_REG_NAND_PAR1 0x10C
+#define JZ_REG_NAND_PAR2 0x110
+#define JZ_REG_NAND_IRQ_STAT 0x114
+#define JZ_REG_NAND_IRQ_CTRL 0x118
+#define JZ_REG_NAND_ERR(x) (0x11C + ((x) << 2))
+
+#define JZ_NAND_ECC_CTRL_PAR_READY BIT(4)
+#define JZ_NAND_ECC_CTRL_ENCODING BIT(3)
+#define JZ_NAND_ECC_CTRL_RS BIT(2)
+#define JZ_NAND_ECC_CTRL_RESET BIT(1)
+#define JZ_NAND_ECC_CTRL_ENABLE BIT(0)
+
+#define JZ_NAND_STATUS_ERR_COUNT (BIT(31) | BIT(30) | BIT(29))
+#define JZ_NAND_STATUS_PAD_FINISH BIT(4)
+#define JZ_NAND_STATUS_DEC_FINISH BIT(3)
+#define JZ_NAND_STATUS_ENC_FINISH BIT(2)
+#define JZ_NAND_STATUS_UNCOR_ERROR BIT(1)
+#define JZ_NAND_STATUS_ERROR BIT(0)
+
+#define JZ_NAND_CTRL_ENABLE_CHIP(x) BIT((x) << 1)
+#define JZ_NAND_CTRL_ASSERT_CHIP(x) BIT(((x) << 1) + 1)
+#define JZ_NAND_CTRL_ASSERT_CHIP_MASK 0xaa
+
+#define JZ_NAND_MEM_CMD_OFFSET 0x08000
+#define JZ_NAND_MEM_ADDR_OFFSET 0x10000
+
+struct jz_nand {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ void __iomem *base;
+ struct resource *mem;
+
+ unsigned char banks[JZ_NAND_NUM_BANKS];
+ void __iomem *bank_base[JZ_NAND_NUM_BANKS];
+ struct resource *bank_mem[JZ_NAND_NUM_BANKS];
+
+ int selected_bank;
+
+ struct gpio_desc *busy_gpio;
+ bool is_reading;
+};
+
+static inline struct jz_nand *mtd_to_jz_nand(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct jz_nand, mtd);
+}
+
+static void jz_nand_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
+ struct nand_chip *chip = mtd->priv;
+ uint32_t ctrl;
+ int banknr;
+
+ ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
+ ctrl &= ~JZ_NAND_CTRL_ASSERT_CHIP_MASK;
+
+ if (chipnr == -1) {
+ banknr = -1;
+ } else {
+ banknr = nand->banks[chipnr] - 1;
+ chip->IO_ADDR_R = nand->bank_base[banknr];
+ chip->IO_ADDR_W = nand->bank_base[banknr];
+ }
+ writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+
+ nand->selected_bank = banknr;
+}
+
+static void jz_nand_cmd_ctrl(struct mtd_info *mtd, int dat, unsigned int ctrl)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
+ struct nand_chip *chip = mtd->priv;
+ uint32_t reg;
+ void __iomem *bank_base = nand->bank_base[nand->selected_bank];
+
+ BUG_ON(nand->selected_bank < 0);
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ BUG_ON((ctrl & NAND_ALE) && (ctrl & NAND_CLE));
+ if (ctrl & NAND_ALE)
+ bank_base += JZ_NAND_MEM_ADDR_OFFSET;
+ else if (ctrl & NAND_CLE)
+ bank_base += JZ_NAND_MEM_CMD_OFFSET;
+ chip->IO_ADDR_W = bank_base;
+
+ reg = readl(nand->base + JZ_REG_NAND_CTRL);
+ if (ctrl & NAND_NCE)
+ reg |= JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
+ else
+ reg &= ~JZ_NAND_CTRL_ASSERT_CHIP(nand->selected_bank);
+ writel(reg, nand->base + JZ_REG_NAND_CTRL);
+ }
+ if (dat != NAND_CMD_NONE)
+ writeb(dat, chip->IO_ADDR_W);
+}
+
+static int jz_nand_dev_ready(struct mtd_info *mtd)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
+ return gpiod_get_value_cansleep(nand->busy_gpio);
+}
+
+static void jz_nand_hwctl(struct mtd_info *mtd, int mode)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
+ uint32_t reg;
+
+ writel(0, nand->base + JZ_REG_NAND_IRQ_STAT);
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+
+ reg |= JZ_NAND_ECC_CTRL_RESET;
+ reg |= JZ_NAND_ECC_CTRL_ENABLE;
+ reg |= JZ_NAND_ECC_CTRL_RS;
+
+ switch (mode) {
+ case NAND_ECC_READ:
+ reg &= ~JZ_NAND_ECC_CTRL_ENCODING;
+ nand->is_reading = true;
+ break;
+ case NAND_ECC_WRITE:
+ reg |= JZ_NAND_ECC_CTRL_ENCODING;
+ nand->is_reading = false;
+ break;
+ default:
+ break;
+ }
+
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+}
+
+static int jz_nand_calculate_ecc_rs(struct mtd_info *mtd, const uint8_t *dat,
+ uint8_t *ecc_code)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
+ uint32_t reg, status;
+ int i;
+ unsigned int timeout = 1000;
+ static uint8_t empty_block_ecc[] = {0xcd, 0x9d, 0x90, 0x58, 0xf4,
+ 0x8b, 0xff, 0xb7, 0x6f};
+
+ if (nand->is_reading)
+ return 0;
+
+ do {
+ status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
+ } while (!(status & JZ_NAND_STATUS_ENC_FINISH) && --timeout);
+
+ if (timeout == 0)
+ return -1;
+
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+ for (i = 0; i < 9; ++i)
+ ecc_code[i] = readb(nand->base + JZ_REG_NAND_PAR0 + i);
+
+ /* If the written data is completly 0xff, we also want to write 0xff as
+ * ecc, otherwise we will get in trouble when doing subpage writes. */
+ if (memcmp(ecc_code, empty_block_ecc, 9) == 0)
+ memset(ecc_code, 0xff, 9);
+
+ return 0;
+}
+
+static void jz_nand_correct_data(uint8_t *dat, int index, int mask)
+{
+ int offset = index & 0x7;
+ uint16_t data;
+
+ index += (index >> 3);
+
+ data = dat[index];
+ data |= dat[index+1] << 8;
+
+ mask ^= (data >> offset) & 0x1ff;
+ data &= ~(0x1ff << offset);
+ data |= (mask << offset);
+
+ dat[index] = data & 0xff;
+ dat[index+1] = (data >> 8) & 0xff;
+}
+
+static int jz_nand_correct_ecc_rs(struct mtd_info *mtd, uint8_t *dat,
+ uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+ struct jz_nand *nand = mtd_to_jz_nand(mtd);
+ int i, error_count, index;
+ uint32_t reg, status, error;
+ uint32_t t;
+ unsigned int timeout = 1000;
+
+ t = read_ecc[0];
+
+ if (t == 0xff) {
+ for (i = 1; i < 9; ++i)
+ t &= read_ecc[i];
+
+ t &= dat[0];
+ t &= dat[nand->chip.ecc.size / 2];
+ t &= dat[nand->chip.ecc.size - 1];
+
+ if (t == 0xff) {
+ for (i = 1; i < nand->chip.ecc.size - 1; ++i)
+ t &= dat[i];
+ if (t == 0xff)
+ return 0;
+ }
+ }
+
+ for (i = 0; i < 9; ++i)
+ writeb(read_ecc[i], nand->base + JZ_REG_NAND_PAR0 + i);
+
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+ reg |= JZ_NAND_ECC_CTRL_PAR_READY;
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+ do {
+ status = readl(nand->base + JZ_REG_NAND_IRQ_STAT);
+ } while (!(status & JZ_NAND_STATUS_DEC_FINISH) && --timeout);
+
+ if (timeout == 0)
+ return -1;
+
+ reg = readl(nand->base + JZ_REG_NAND_ECC_CTRL);
+ reg &= ~JZ_NAND_ECC_CTRL_ENABLE;
+ writel(reg, nand->base + JZ_REG_NAND_ECC_CTRL);
+
+ if (status & JZ_NAND_STATUS_ERROR) {
+ if (status & JZ_NAND_STATUS_UNCOR_ERROR)
+ return -1;
+
+ error_count = (status & JZ_NAND_STATUS_ERR_COUNT) >> 29;
+
+ for (i = 0; i < error_count; ++i) {
+ error = readl(nand->base + JZ_REG_NAND_ERR(i));
+ index = ((error >> 16) & 0x1ff) - 1;
+ if (index >= 0 && index < 512)
+ jz_nand_correct_data(dat, index, error & 0x1ff);
+ }
+
+ return error_count;
+ }
+
+ return 0;
+}
+
+static int jz_nand_ioremap_resource(struct platform_device *pdev,
+ const char *name, struct resource **res, void *__iomem *base)
+{
+ int ret;
+
+ *res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
+ if (!*res) {
+ dev_err(&pdev->dev, "Failed to get platform %s memory\n", name);
+ ret = -ENXIO;
+ goto err;
+ }
+
+ *res = request_mem_region((*res)->start, resource_size(*res),
+ pdev->name);
+ if (!*res) {
+ dev_err(&pdev->dev, "Failed to request %s memory region\n", name);
+ ret = -EBUSY;
+ goto err;
+ }
+
+ *base = ioremap((*res)->start, resource_size(*res));
+ if (!*base) {
+ dev_err(&pdev->dev, "Failed to ioremap %s memory region\n", name);
+ ret = -EBUSY;
+ goto err_release_mem;
+ }
+
+ return 0;
+
+err_release_mem:
+ release_mem_region((*res)->start, resource_size(*res));
+err:
+ *res = NULL;
+ *base = NULL;
+ return ret;
+}
+
+static inline void jz_nand_iounmap_resource(struct resource *res,
+ void __iomem *base)
+{
+ iounmap(base);
+ release_mem_region(res->start, resource_size(res));
+}
+
+static int jz_nand_detect_bank(struct platform_device *pdev,
+ struct jz_nand *nand, unsigned char bank,
+ size_t chipnr, uint8_t *nand_maf_id,
+ uint8_t *nand_dev_id)
+{
+ int ret;
+ int gpio;
+ char gpio_name[9];
+ char res_name[6];
+ uint32_t ctrl;
+ struct mtd_info *mtd = &nand->mtd;
+ struct nand_chip *chip = &nand->chip;
+
+ /* Request GPIO port. */
+ gpio = JZ_GPIO_MEM_CS0 + bank - 1;
+ sprintf(gpio_name, "NAND CS%d", bank);
+ ret = gpio_request(gpio, gpio_name);
+ if (ret) {
+ dev_warn(&pdev->dev,
+ "Failed to request %s gpio %d: %d\n",
+ gpio_name, gpio, ret);
+ goto notfound_gpio;
+ }
+
+ /* Request I/O resource. */
+ sprintf(res_name, "bank%d", bank);
+ ret = jz_nand_ioremap_resource(pdev, res_name,
+ &nand->bank_mem[bank - 1],
+ &nand->bank_base[bank - 1]);
+ if (ret)
+ goto notfound_resource;
+
+ /* Enable chip in bank. */
+ jz_gpio_set_function(gpio, JZ_GPIO_FUNC_MEM_CS0);
+ ctrl = readl(nand->base + JZ_REG_NAND_CTRL);
+ ctrl |= JZ_NAND_CTRL_ENABLE_CHIP(bank - 1);
+ writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+
+ if (chipnr == 0) {
+ /* Detect first chip. */
+ ret = nand_scan_ident(mtd, 1, NULL);
+ if (ret)
+ goto notfound_id;
+
+ /* Retrieve the IDs from the first chip. */
+ chip->select_chip(mtd, 0);
+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+ *nand_maf_id = chip->read_byte(mtd);
+ *nand_dev_id = chip->read_byte(mtd);
+ } else {
+ /* Detect additional chip. */
+ chip->select_chip(mtd, chipnr);
+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+ if (*nand_maf_id != chip->read_byte(mtd)
+ || *nand_dev_id != chip->read_byte(mtd)) {
+ ret = -ENODEV;
+ goto notfound_id;
+ }
+
+ /* Update size of the MTD. */
+ chip->numchips++;
+ mtd->size += chip->chipsize;
+ }
+
+ dev_info(&pdev->dev, "Found chip %i on bank %i\n", chipnr, bank);
+ return 0;
+
+notfound_id:
+ dev_info(&pdev->dev, "No chip found on bank %i\n", bank);
+ ctrl &= ~(JZ_NAND_CTRL_ENABLE_CHIP(bank - 1));
+ writel(ctrl, nand->base + JZ_REG_NAND_CTRL);
+ jz_gpio_set_function(gpio, JZ_GPIO_FUNC_NONE);
+ jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+ nand->bank_base[bank - 1]);
+notfound_resource:
+ gpio_free(gpio);
+notfound_gpio:
+ return ret;
+}
+
+static int jz_nand_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct jz_nand *nand;
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
+ struct jz_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ size_t chipnr, bank_idx;
+ uint8_t nand_maf_id = 0, nand_dev_id = 0;
+
+ nand = kzalloc(sizeof(*nand), GFP_KERNEL);
+ if (!nand)
+ return -ENOMEM;
+
+ ret = jz_nand_ioremap_resource(pdev, "mmio", &nand->mem, &nand->base);
+ if (ret)
+ goto err_free;
+
+ nand->busy_gpio = devm_gpiod_get_optional(&pdev->dev, "busy", GPIOD_IN);
+ if (IS_ERR(nand->busy_gpio)) {
+ ret = PTR_ERR(nand->busy_gpio);
+ dev_err(&pdev->dev, "Failed to request busy gpio %d\n",
+ ret);
+ goto err_iounmap_mmio;
+ }
+
+ mtd = &nand->mtd;
+ chip = &nand->chip;
+ mtd->priv = chip;
+ mtd->dev.parent = &pdev->dev;
+ mtd->name = "jz4740-nand";
+
+ chip->ecc.hwctl = jz_nand_hwctl;
+ chip->ecc.calculate = jz_nand_calculate_ecc_rs;
+ chip->ecc.correct = jz_nand_correct_ecc_rs;
+ chip->ecc.mode = NAND_ECC_HW_OOB_FIRST;
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 9;
+ chip->ecc.strength = 4;
+
+ if (pdata)
+ chip->ecc.layout = pdata->ecc_layout;
+
+ chip->chip_delay = 50;
+ chip->cmd_ctrl = jz_nand_cmd_ctrl;
+ chip->select_chip = jz_nand_select_chip;
+
+ if (nand->busy_gpio)
+ chip->dev_ready = jz_nand_dev_ready;
+
+ platform_set_drvdata(pdev, nand);
+
+ /* We are going to autodetect NAND chips in the banks specified in the
+ * platform data. Although nand_scan_ident() can detect multiple chips,
+ * it requires those chips to be numbered consecuitively, which is not
+ * always the case for external memory banks. And a fixed chip-to-bank
+ * mapping is not practical either, since for example Dingoo units
+ * produced at different times have NAND chips in different banks.
+ */
+ chipnr = 0;
+ for (bank_idx = 0; bank_idx < JZ_NAND_NUM_BANKS; bank_idx++) {
+ unsigned char bank;
+
+ /* If there is no platform data, look for NAND in bank 1,
+ * which is the most likely bank since it is the only one
+ * that can be booted from.
+ */
+ bank = pdata ? pdata->banks[bank_idx] : bank_idx ^ 1;
+ if (bank == 0)
+ break;
+ if (bank > JZ_NAND_NUM_BANKS) {
+ dev_warn(&pdev->dev,
+ "Skipping non-existing bank: %d\n", bank);
+ continue;
+ }
+ /* The detection routine will directly or indirectly call
+ * jz_nand_select_chip(), so nand->banks has to contain the
+ * bank we're checking.
+ */
+ nand->banks[chipnr] = bank;
+ if (jz_nand_detect_bank(pdev, nand, bank, chipnr,
+ &nand_maf_id, &nand_dev_id) == 0)
+ chipnr++;
+ else
+ nand->banks[chipnr] = 0;
+ }
+ if (chipnr == 0) {
+ dev_err(&pdev->dev, "No NAND chips found\n");
+ goto err_iounmap_mmio;
+ }
+
+ if (pdata && pdata->ident_callback) {
+ pdata->ident_callback(pdev, chip, &pdata->partitions,
+ &pdata->num_partitions);
+ }
+
+ ret = nand_scan_tail(mtd);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to scan NAND\n");
+ goto err_unclaim_banks;
+ }
+
+ ret = mtd_device_parse_register(mtd, NULL, NULL,
+ pdata ? pdata->partitions : NULL,
+ pdata ? pdata->num_partitions : 0);
+
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add mtd device\n");
+ goto err_nand_release;
+ }
+
+ dev_info(&pdev->dev, "Successfully registered JZ4740 NAND driver\n");
+
+ return 0;
+
+err_nand_release:
+ nand_release(mtd);
+err_unclaim_banks:
+ while (chipnr--) {
+ unsigned char bank = nand->banks[chipnr];
+ gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
+ jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+ nand->bank_base[bank - 1]);
+ }
+ writel(0, nand->base + JZ_REG_NAND_CTRL);
+err_iounmap_mmio:
+ jz_nand_iounmap_resource(nand->mem, nand->base);
+err_free:
+ kfree(nand);
+ return ret;
+}
+
+static int jz_nand_remove(struct platform_device *pdev)
+{
+ struct jz_nand *nand = platform_get_drvdata(pdev);
+ size_t i;
+
+ nand_release(&nand->mtd);
+
+ /* Deassert and disable all chips */
+ writel(0, nand->base + JZ_REG_NAND_CTRL);
+
+ for (i = 0; i < JZ_NAND_NUM_BANKS; ++i) {
+ unsigned char bank = nand->banks[i];
+ if (bank != 0) {
+ jz_nand_iounmap_resource(nand->bank_mem[bank - 1],
+ nand->bank_base[bank - 1]);
+ gpio_free(JZ_GPIO_MEM_CS0 + bank - 1);
+ }
+ }
+
+ jz_nand_iounmap_resource(nand->mem, nand->base);
+
+ kfree(nand);
+
+ return 0;
+}
+
+static struct platform_driver jz_nand_driver = {
+ .probe = jz_nand_probe,
+ .remove = jz_nand_remove,
+ .driver = {
+ .name = "jz4740-nand",
+ },
+};
+
+module_platform_driver(jz_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("NAND controller driver for JZ4740 SoC");
+MODULE_ALIAS("platform:jz4740-nand");
diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c
new file mode 100644
index 0000000..3475109
--- /dev/null
+++ b/drivers/mtd/nand/lpc32xx_mlc.c
@@ -0,0 +1,889 @@
+/*
+ * Driver for NAND MLC Controller in LPC32xx
+ *
+ * Author: Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright © 2011 WORK Microwave GmbH
+ * Copyright © 2011, 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ *
+ * NAND Flash Controller Operation:
+ * - Read: Auto Decode
+ * - Write: Auto Encode
+ * - Tested Page Sizes: 2048, 4096
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/completion.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/of_gpio.h>
+#include <linux/mtd/lpc32xx_mlc.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/mtd/nand_ecc.h>
+
+#define DRV_NAME "lpc32xx_mlc"
+
+/**********************************************************************
+* MLC NAND controller register offsets
+**********************************************************************/
+
+#define MLC_BUFF(x) (x + 0x00000)
+#define MLC_DATA(x) (x + 0x08000)
+#define MLC_CMD(x) (x + 0x10000)
+#define MLC_ADDR(x) (x + 0x10004)
+#define MLC_ECC_ENC_REG(x) (x + 0x10008)
+#define MLC_ECC_DEC_REG(x) (x + 0x1000C)
+#define MLC_ECC_AUTO_ENC_REG(x) (x + 0x10010)
+#define MLC_ECC_AUTO_DEC_REG(x) (x + 0x10014)
+#define MLC_RPR(x) (x + 0x10018)
+#define MLC_WPR(x) (x + 0x1001C)
+#define MLC_RUBP(x) (x + 0x10020)
+#define MLC_ROBP(x) (x + 0x10024)
+#define MLC_SW_WP_ADD_LOW(x) (x + 0x10028)
+#define MLC_SW_WP_ADD_HIG(x) (x + 0x1002C)
+#define MLC_ICR(x) (x + 0x10030)
+#define MLC_TIME_REG(x) (x + 0x10034)
+#define MLC_IRQ_MR(x) (x + 0x10038)
+#define MLC_IRQ_SR(x) (x + 0x1003C)
+#define MLC_LOCK_PR(x) (x + 0x10044)
+#define MLC_ISR(x) (x + 0x10048)
+#define MLC_CEH(x) (x + 0x1004C)
+
+/**********************************************************************
+* MLC_CMD bit definitions
+**********************************************************************/
+#define MLCCMD_RESET 0xFF
+
+/**********************************************************************
+* MLC_ICR bit definitions
+**********************************************************************/
+#define MLCICR_WPROT (1 << 3)
+#define MLCICR_LARGEBLOCK (1 << 2)
+#define MLCICR_LONGADDR (1 << 1)
+#define MLCICR_16BIT (1 << 0) /* unsupported by LPC32x0! */
+
+/**********************************************************************
+* MLC_TIME_REG bit definitions
+**********************************************************************/
+#define MLCTIMEREG_TCEA_DELAY(n) (((n) & 0x03) << 24)
+#define MLCTIMEREG_BUSY_DELAY(n) (((n) & 0x1F) << 19)
+#define MLCTIMEREG_NAND_TA(n) (((n) & 0x07) << 16)
+#define MLCTIMEREG_RD_HIGH(n) (((n) & 0x0F) << 12)
+#define MLCTIMEREG_RD_LOW(n) (((n) & 0x0F) << 8)
+#define MLCTIMEREG_WR_HIGH(n) (((n) & 0x0F) << 4)
+#define MLCTIMEREG_WR_LOW(n) (((n) & 0x0F) << 0)
+
+/**********************************************************************
+* MLC_IRQ_MR and MLC_IRQ_SR bit definitions
+**********************************************************************/
+#define MLCIRQ_NAND_READY (1 << 5)
+#define MLCIRQ_CONTROLLER_READY (1 << 4)
+#define MLCIRQ_DECODE_FAILURE (1 << 3)
+#define MLCIRQ_DECODE_ERROR (1 << 2)
+#define MLCIRQ_ECC_READY (1 << 1)
+#define MLCIRQ_WRPROT_FAULT (1 << 0)
+
+/**********************************************************************
+* MLC_LOCK_PR bit definitions
+**********************************************************************/
+#define MLCLOCKPR_MAGIC 0xA25E
+
+/**********************************************************************
+* MLC_ISR bit definitions
+**********************************************************************/
+#define MLCISR_DECODER_FAILURE (1 << 6)
+#define MLCISR_ERRORS ((1 << 4) | (1 << 5))
+#define MLCISR_ERRORS_DETECTED (1 << 3)
+#define MLCISR_ECC_READY (1 << 2)
+#define MLCISR_CONTROLLER_READY (1 << 1)
+#define MLCISR_NAND_READY (1 << 0)
+
+/**********************************************************************
+* MLC_CEH bit definitions
+**********************************************************************/
+#define MLCCEH_NORMAL (1 << 0)
+
+struct lpc32xx_nand_cfg_mlc {
+ uint32_t tcea_delay;
+ uint32_t busy_delay;
+ uint32_t nand_ta;
+ uint32_t rd_high;
+ uint32_t rd_low;
+ uint32_t wr_high;
+ uint32_t wr_low;
+ int wp_gpio;
+ struct mtd_partition *parts;
+ unsigned num_parts;
+};
+
+static struct nand_ecclayout lpc32xx_nand_oob = {
+ .eccbytes = 40,
+ .eccpos = { 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
+ .oobfree = {
+ { .offset = 0,
+ .length = 6, },
+ { .offset = 16,
+ .length = 6, },
+ { .offset = 32,
+ .length = 6, },
+ { .offset = 48,
+ .length = 6, },
+ },
+};
+
+static struct nand_bbt_descr lpc32xx_nand_bbt = {
+ .options = NAND_BBT_ABSPAGE | NAND_BBT_2BIT | NAND_BBT_NO_OOB |
+ NAND_BBT_WRITE,
+ .pages = { 524224, 0, 0, 0, 0, 0, 0, 0 },
+};
+
+static struct nand_bbt_descr lpc32xx_nand_bbt_mirror = {
+ .options = NAND_BBT_ABSPAGE | NAND_BBT_2BIT | NAND_BBT_NO_OOB |
+ NAND_BBT_WRITE,
+ .pages = { 524160, 0, 0, 0, 0, 0, 0, 0 },
+};
+
+struct lpc32xx_nand_host {
+ struct nand_chip nand_chip;
+ struct lpc32xx_mlc_platform_data *pdata;
+ struct clk *clk;
+ struct mtd_info mtd;
+ void __iomem *io_base;
+ int irq;
+ struct lpc32xx_nand_cfg_mlc *ncfg;
+ struct completion comp_nand;
+ struct completion comp_controller;
+ uint32_t llptr;
+ /*
+ * Physical addresses of ECC buffer, DMA data buffers, OOB data buffer
+ */
+ dma_addr_t oob_buf_phy;
+ /*
+ * Virtual addresses of ECC buffer, DMA data buffers, OOB data buffer
+ */
+ uint8_t *oob_buf;
+ /* Physical address of DMA base address */
+ dma_addr_t io_base_phy;
+
+ struct completion comp_dma;
+ struct dma_chan *dma_chan;
+ struct dma_slave_config dma_slave_config;
+ struct scatterlist sgl;
+ uint8_t *dma_buf;
+ uint8_t *dummy_buf;
+ int mlcsubpages; /* number of 512bytes-subpages */
+};
+
+/*
+ * Activate/Deactivate DMA Operation:
+ *
+ * Using the PL080 DMA Controller for transferring the 512 byte subpages
+ * instead of doing readl() / writel() in a loop slows it down significantly.
+ * Measurements via getnstimeofday() upon 512 byte subpage reads reveal:
+ *
+ * - readl() of 128 x 32 bits in a loop: ~20us
+ * - DMA read of 512 bytes (32 bit, 4...128 words bursts): ~60us
+ * - DMA read of 512 bytes (32 bit, no bursts): ~100us
+ *
+ * This applies to the transfer itself. In the DMA case: only the
+ * wait_for_completion() (DMA setup _not_ included).
+ *
+ * Note that the 512 bytes subpage transfer is done directly from/to a
+ * FIFO/buffer inside the NAND controller. Most of the time (~400-800us for a
+ * 2048 bytes page) is spent waiting for the NAND IRQ, anyway. (The NAND
+ * controller transferring data between its internal buffer to/from the NAND
+ * chip.)
+ *
+ * Therefore, using the PL080 DMA is disabled by default, for now.
+ *
+ */
+static int use_dma;
+
+static void lpc32xx_nand_setup(struct lpc32xx_nand_host *host)
+{
+ uint32_t clkrate, tmp;
+
+ /* Reset MLC controller */
+ writel(MLCCMD_RESET, MLC_CMD(host->io_base));
+ udelay(1000);
+
+ /* Get base clock for MLC block */
+ clkrate = clk_get_rate(host->clk);
+ if (clkrate == 0)
+ clkrate = 104000000;
+
+ /* Unlock MLC_ICR
+ * (among others, will be locked again automatically) */
+ writew(MLCLOCKPR_MAGIC, MLC_LOCK_PR(host->io_base));
+
+ /* Configure MLC Controller: Large Block, 5 Byte Address */
+ tmp = MLCICR_LARGEBLOCK | MLCICR_LONGADDR;
+ writel(tmp, MLC_ICR(host->io_base));
+
+ /* Unlock MLC_TIME_REG
+ * (among others, will be locked again automatically) */
+ writew(MLCLOCKPR_MAGIC, MLC_LOCK_PR(host->io_base));
+
+ /* Compute clock setup values, see LPC and NAND manual */
+ tmp = 0;
+ tmp |= MLCTIMEREG_TCEA_DELAY(clkrate / host->ncfg->tcea_delay + 1);
+ tmp |= MLCTIMEREG_BUSY_DELAY(clkrate / host->ncfg->busy_delay + 1);
+ tmp |= MLCTIMEREG_NAND_TA(clkrate / host->ncfg->nand_ta + 1);
+ tmp |= MLCTIMEREG_RD_HIGH(clkrate / host->ncfg->rd_high + 1);
+ tmp |= MLCTIMEREG_RD_LOW(clkrate / host->ncfg->rd_low);
+ tmp |= MLCTIMEREG_WR_HIGH(clkrate / host->ncfg->wr_high + 1);
+ tmp |= MLCTIMEREG_WR_LOW(clkrate / host->ncfg->wr_low);
+ writel(tmp, MLC_TIME_REG(host->io_base));
+
+ /* Enable IRQ for CONTROLLER_READY and NAND_READY */
+ writeb(MLCIRQ_CONTROLLER_READY | MLCIRQ_NAND_READY,
+ MLC_IRQ_MR(host->io_base));
+
+ /* Normal nCE operation: nCE controlled by controller */
+ writel(MLCCEH_NORMAL, MLC_CEH(host->io_base));
+}
+
+/*
+ * Hardware specific access to control lines
+ */
+static void lpc32xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct lpc32xx_nand_host *host = nand_chip->priv;
+
+ if (cmd != NAND_CMD_NONE) {
+ if (ctrl & NAND_CLE)
+ writel(cmd, MLC_CMD(host->io_base));
+ else
+ writel(cmd, MLC_ADDR(host->io_base));
+ }
+}
+
+/*
+ * Read Device Ready (NAND device _and_ controller ready)
+ */
+static int lpc32xx_nand_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct lpc32xx_nand_host *host = nand_chip->priv;
+
+ if ((readb(MLC_ISR(host->io_base)) &
+ (MLCISR_CONTROLLER_READY | MLCISR_NAND_READY)) ==
+ (MLCISR_CONTROLLER_READY | MLCISR_NAND_READY))
+ return 1;
+
+ return 0;
+}
+
+static irqreturn_t lpc3xxx_nand_irq(int irq, struct lpc32xx_nand_host *host)
+{
+ uint8_t sr;
+
+ /* Clear interrupt flag by reading status */
+ sr = readb(MLC_IRQ_SR(host->io_base));
+ if (sr & MLCIRQ_NAND_READY)
+ complete(&host->comp_nand);
+ if (sr & MLCIRQ_CONTROLLER_READY)
+ complete(&host->comp_controller);
+
+ return IRQ_HANDLED;
+}
+
+static int lpc32xx_waitfunc_nand(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ if (readb(MLC_ISR(host->io_base)) & MLCISR_NAND_READY)
+ goto exit;
+
+ wait_for_completion(&host->comp_nand);
+
+ while (!(readb(MLC_ISR(host->io_base)) & MLCISR_NAND_READY)) {
+ /* Seems to be delayed sometimes by controller */
+ dev_dbg(&mtd->dev, "Warning: NAND not ready.\n");
+ cpu_relax();
+ }
+
+exit:
+ return NAND_STATUS_READY;
+}
+
+static int lpc32xx_waitfunc_controller(struct mtd_info *mtd,
+ struct nand_chip *chip)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ if (readb(MLC_ISR(host->io_base)) & MLCISR_CONTROLLER_READY)
+ goto exit;
+
+ wait_for_completion(&host->comp_controller);
+
+ while (!(readb(MLC_ISR(host->io_base)) &
+ MLCISR_CONTROLLER_READY)) {
+ dev_dbg(&mtd->dev, "Warning: Controller not ready.\n");
+ cpu_relax();
+ }
+
+exit:
+ return NAND_STATUS_READY;
+}
+
+static int lpc32xx_waitfunc(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ lpc32xx_waitfunc_nand(mtd, chip);
+ lpc32xx_waitfunc_controller(mtd, chip);
+
+ return NAND_STATUS_READY;
+}
+
+/*
+ * Enable NAND write protect
+ */
+static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
+{
+ if (gpio_is_valid(host->ncfg->wp_gpio))
+ gpio_set_value(host->ncfg->wp_gpio, 0);
+}
+
+/*
+ * Disable NAND write protect
+ */
+static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host)
+{
+ if (gpio_is_valid(host->ncfg->wp_gpio))
+ gpio_set_value(host->ncfg->wp_gpio, 1);
+}
+
+static void lpc32xx_dma_complete_func(void *completion)
+{
+ complete(completion);
+}
+
+static int lpc32xx_xmit_dma(struct mtd_info *mtd, void *mem, int len,
+ enum dma_transfer_direction dir)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+ struct dma_async_tx_descriptor *desc;
+ int flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+ int res;
+
+ sg_init_one(&host->sgl, mem, len);
+
+ res = dma_map_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+ if (res != 1) {
+ dev_err(mtd->dev.parent, "Failed to map sg list\n");
+ return -ENXIO;
+ }
+ desc = dmaengine_prep_slave_sg(host->dma_chan, &host->sgl, 1, dir,
+ flags);
+ if (!desc) {
+ dev_err(mtd->dev.parent, "Failed to prepare slave sg\n");
+ goto out1;
+ }
+
+ init_completion(&host->comp_dma);
+ desc->callback = lpc32xx_dma_complete_func;
+ desc->callback_param = &host->comp_dma;
+
+ dmaengine_submit(desc);
+ dma_async_issue_pending(host->dma_chan);
+
+ wait_for_completion_timeout(&host->comp_dma, msecs_to_jiffies(1000));
+
+ dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+ return 0;
+out1:
+ dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+ return -ENXIO;
+}
+
+static int lpc32xx_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+ int i, j;
+ uint8_t *oobbuf = chip->oob_poi;
+ uint32_t mlc_isr;
+ int res;
+ uint8_t *dma_buf;
+ bool dma_mapped;
+
+ if ((void *)buf <= high_memory) {
+ dma_buf = buf;
+ dma_mapped = true;
+ } else {
+ dma_buf = host->dma_buf;
+ dma_mapped = false;
+ }
+
+ /* Writing Command and Address */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ /* For all sub-pages */
+ for (i = 0; i < host->mlcsubpages; i++) {
+ /* Start Auto Decode Command */
+ writeb(0x00, MLC_ECC_AUTO_DEC_REG(host->io_base));
+
+ /* Wait for Controller Ready */
+ lpc32xx_waitfunc_controller(mtd, chip);
+
+ /* Check ECC Error status */
+ mlc_isr = readl(MLC_ISR(host->io_base));
+ if (mlc_isr & MLCISR_DECODER_FAILURE) {
+ mtd->ecc_stats.failed++;
+ dev_warn(&mtd->dev, "%s: DECODER_FAILURE\n", __func__);
+ } else if (mlc_isr & MLCISR_ERRORS_DETECTED) {
+ mtd->ecc_stats.corrected += ((mlc_isr >> 4) & 0x3) + 1;
+ }
+
+ /* Read 512 + 16 Bytes */
+ if (use_dma) {
+ res = lpc32xx_xmit_dma(mtd, dma_buf + i * 512, 512,
+ DMA_DEV_TO_MEM);
+ if (res)
+ return res;
+ } else {
+ for (j = 0; j < (512 >> 2); j++) {
+ *((uint32_t *)(buf)) =
+ readl(MLC_BUFF(host->io_base));
+ buf += 4;
+ }
+ }
+ for (j = 0; j < (16 >> 2); j++) {
+ *((uint32_t *)(oobbuf)) =
+ readl(MLC_BUFF(host->io_base));
+ oobbuf += 4;
+ }
+ }
+
+ if (use_dma && !dma_mapped)
+ memcpy(buf, dma_buf, mtd->writesize);
+
+ return 0;
+}
+
+static int lpc32xx_write_page_lowlevel(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+ const uint8_t *oobbuf = chip->oob_poi;
+ uint8_t *dma_buf = (uint8_t *)buf;
+ int res;
+ int i, j;
+
+ if (use_dma && (void *)buf >= high_memory) {
+ dma_buf = host->dma_buf;
+ memcpy(dma_buf, buf, mtd->writesize);
+ }
+
+ for (i = 0; i < host->mlcsubpages; i++) {
+ /* Start Encode */
+ writeb(0x00, MLC_ECC_ENC_REG(host->io_base));
+
+ /* Write 512 + 6 Bytes to Buffer */
+ if (use_dma) {
+ res = lpc32xx_xmit_dma(mtd, dma_buf + i * 512, 512,
+ DMA_MEM_TO_DEV);
+ if (res)
+ return res;
+ } else {
+ for (j = 0; j < (512 >> 2); j++) {
+ writel(*((uint32_t *)(buf)),
+ MLC_BUFF(host->io_base));
+ buf += 4;
+ }
+ }
+ writel(*((uint32_t *)(oobbuf)), MLC_BUFF(host->io_base));
+ oobbuf += 4;
+ writew(*((uint16_t *)(oobbuf)), MLC_BUFF(host->io_base));
+ oobbuf += 12;
+
+ /* Auto Encode w/ Bit 8 = 0 (see LPC MLC Controller manual) */
+ writeb(0x00, MLC_ECC_AUTO_ENC_REG(host->io_base));
+
+ /* Wait for Controller Ready */
+ lpc32xx_waitfunc_controller(mtd, chip);
+ }
+ return 0;
+}
+
+static int lpc32xx_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ /* Read whole page - necessary with MLC controller! */
+ lpc32xx_read_page(mtd, chip, host->dummy_buf, 1, page);
+
+ return 0;
+}
+
+static int lpc32xx_write_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ /* None, write_oob conflicts with the automatic LPC MLC ECC decoder! */
+ return 0;
+}
+
+/* Prepares MLC for transfers with H/W ECC enabled: always enabled anyway */
+static void lpc32xx_ecc_enable(struct mtd_info *mtd, int mode)
+{
+ /* Always enabled! */
+}
+
+static int lpc32xx_dma_setup(struct lpc32xx_nand_host *host)
+{
+ struct mtd_info *mtd = &host->mtd;
+ dma_cap_mask_t mask;
+
+ if (!host->pdata || !host->pdata->dma_filter) {
+ dev_err(mtd->dev.parent, "no DMA platform data\n");
+ return -ENOENT;
+ }
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ host->dma_chan = dma_request_channel(mask, host->pdata->dma_filter,
+ "nand-mlc");
+ if (!host->dma_chan) {
+ dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
+ return -EBUSY;
+ }
+
+ /*
+ * Set direction to a sensible value even if the dmaengine driver
+ * should ignore it. With the default (DMA_MEM_TO_MEM), the amba-pl08x
+ * driver criticizes it as "alien transfer direction".
+ */
+ host->dma_slave_config.direction = DMA_DEV_TO_MEM;
+ host->dma_slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_slave_config.src_maxburst = 128;
+ host->dma_slave_config.dst_maxburst = 128;
+ /* DMA controller does flow control: */
+ host->dma_slave_config.device_fc = false;
+ host->dma_slave_config.src_addr = MLC_BUFF(host->io_base_phy);
+ host->dma_slave_config.dst_addr = MLC_BUFF(host->io_base_phy);
+ if (dmaengine_slave_config(host->dma_chan, &host->dma_slave_config)) {
+ dev_err(mtd->dev.parent, "Failed to setup DMA slave\n");
+ goto out1;
+ }
+
+ return 0;
+out1:
+ dma_release_channel(host->dma_chan);
+ return -ENXIO;
+}
+
+static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev)
+{
+ struct lpc32xx_nand_cfg_mlc *ncfg;
+ struct device_node *np = dev->of_node;
+
+ ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL);
+ if (!ncfg)
+ return NULL;
+
+ of_property_read_u32(np, "nxp,tcea-delay", &ncfg->tcea_delay);
+ of_property_read_u32(np, "nxp,busy-delay", &ncfg->busy_delay);
+ of_property_read_u32(np, "nxp,nand-ta", &ncfg->nand_ta);
+ of_property_read_u32(np, "nxp,rd-high", &ncfg->rd_high);
+ of_property_read_u32(np, "nxp,rd-low", &ncfg->rd_low);
+ of_property_read_u32(np, "nxp,wr-high", &ncfg->wr_high);
+ of_property_read_u32(np, "nxp,wr-low", &ncfg->wr_low);
+
+ if (!ncfg->tcea_delay || !ncfg->busy_delay || !ncfg->nand_ta ||
+ !ncfg->rd_high || !ncfg->rd_low || !ncfg->wr_high ||
+ !ncfg->wr_low) {
+ dev_err(dev, "chip parameters not specified correctly\n");
+ return NULL;
+ }
+
+ ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
+
+ return ncfg;
+}
+
+/*
+ * Probe for NAND controller
+ */
+static int lpc32xx_nand_probe(struct platform_device *pdev)
+{
+ struct lpc32xx_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand_chip;
+ struct resource *rc;
+ int res;
+ struct mtd_part_parser_data ppdata = {};
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->io_base = devm_ioremap_resource(&pdev->dev, rc);
+ if (IS_ERR(host->io_base))
+ return PTR_ERR(host->io_base);
+
+ host->io_base_phy = rc->start;
+
+ mtd = &host->mtd;
+ nand_chip = &host->nand_chip;
+ if (pdev->dev.of_node)
+ host->ncfg = lpc32xx_parse_dt(&pdev->dev);
+ if (!host->ncfg) {
+ dev_err(&pdev->dev,
+ "Missing or bad NAND config from device tree\n");
+ return -ENOENT;
+ }
+ if (host->ncfg->wp_gpio == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (gpio_is_valid(host->ncfg->wp_gpio) &&
+ gpio_request(host->ncfg->wp_gpio, "NAND WP")) {
+ dev_err(&pdev->dev, "GPIO not available\n");
+ return -EBUSY;
+ }
+ lpc32xx_wp_disable(host);
+
+ host->pdata = dev_get_platdata(&pdev->dev);
+
+ nand_chip->priv = host; /* link the private data structures */
+ mtd->priv = nand_chip;
+ mtd->dev.parent = &pdev->dev;
+
+ /* Get NAND clock */
+ host->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk)) {
+ dev_err(&pdev->dev, "Clock initialization failure\n");
+ res = -ENOENT;
+ goto err_exit1;
+ }
+ clk_prepare_enable(host->clk);
+
+ nand_chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl;
+ nand_chip->dev_ready = lpc32xx_nand_device_ready;
+ nand_chip->chip_delay = 25; /* us */
+ nand_chip->IO_ADDR_R = MLC_DATA(host->io_base);
+ nand_chip->IO_ADDR_W = MLC_DATA(host->io_base);
+
+ /* Init NAND controller */
+ lpc32xx_nand_setup(host);
+
+ platform_set_drvdata(pdev, host);
+
+ /* Initialize function pointers */
+ nand_chip->ecc.hwctl = lpc32xx_ecc_enable;
+ nand_chip->ecc.read_page_raw = lpc32xx_read_page;
+ nand_chip->ecc.read_page = lpc32xx_read_page;
+ nand_chip->ecc.write_page_raw = lpc32xx_write_page_lowlevel;
+ nand_chip->ecc.write_page = lpc32xx_write_page_lowlevel;
+ nand_chip->ecc.write_oob = lpc32xx_write_oob;
+ nand_chip->ecc.read_oob = lpc32xx_read_oob;
+ nand_chip->ecc.strength = 4;
+ nand_chip->waitfunc = lpc32xx_waitfunc;
+
+ nand_chip->options = NAND_NO_SUBPAGE_WRITE;
+ nand_chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+ nand_chip->bbt_td = &lpc32xx_nand_bbt;
+ nand_chip->bbt_md = &lpc32xx_nand_bbt_mirror;
+
+ if (use_dma) {
+ res = lpc32xx_dma_setup(host);
+ if (res) {
+ res = -EIO;
+ goto err_exit2;
+ }
+ }
+
+ /*
+ * Scan to find existance of the device and
+ * Get the type of NAND device SMALL block or LARGE block
+ */
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ res = -ENXIO;
+ goto err_exit3;
+ }
+
+ host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
+ if (!host->dma_buf) {
+ res = -ENOMEM;
+ goto err_exit3;
+ }
+
+ host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL);
+ if (!host->dummy_buf) {
+ res = -ENOMEM;
+ goto err_exit3;
+ }
+
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = mtd->writesize;
+ nand_chip->ecc.layout = &lpc32xx_nand_oob;
+ host->mlcsubpages = mtd->writesize / 512;
+
+ /* initially clear interrupt status */
+ readb(MLC_IRQ_SR(host->io_base));
+
+ init_completion(&host->comp_nand);
+ init_completion(&host->comp_controller);
+
+ host->irq = platform_get_irq(pdev, 0);
+ if ((host->irq < 0) || (host->irq >= NR_IRQS)) {
+ dev_err(&pdev->dev, "failed to get platform irq\n");
+ res = -EINVAL;
+ goto err_exit3;
+ }
+
+ if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq,
+ IRQF_TRIGGER_HIGH, DRV_NAME, host)) {
+ dev_err(&pdev->dev, "Error requesting NAND IRQ\n");
+ res = -ENXIO;
+ goto err_exit3;
+ }
+
+ /*
+ * Fills out all the uninitialized function pointers with the defaults
+ * And scans for a bad block table if appropriate.
+ */
+ if (nand_scan_tail(mtd)) {
+ res = -ENXIO;
+ goto err_exit4;
+ }
+
+ mtd->name = DRV_NAME;
+
+ ppdata.of_node = pdev->dev.of_node;
+ res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts,
+ host->ncfg->num_parts);
+ if (!res)
+ return res;
+
+ nand_release(mtd);
+
+err_exit4:
+ free_irq(host->irq, host);
+err_exit3:
+ if (use_dma)
+ dma_release_channel(host->dma_chan);
+err_exit2:
+ clk_disable_unprepare(host->clk);
+ clk_put(host->clk);
+err_exit1:
+ lpc32xx_wp_enable(host);
+ gpio_free(host->ncfg->wp_gpio);
+
+ return res;
+}
+
+/*
+ * Remove NAND device
+ */
+static int lpc32xx_nand_remove(struct platform_device *pdev)
+{
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = &host->mtd;
+
+ nand_release(mtd);
+ free_irq(host->irq, host);
+ if (use_dma)
+ dma_release_channel(host->dma_chan);
+
+ clk_disable_unprepare(host->clk);
+ clk_put(host->clk);
+
+ lpc32xx_wp_enable(host);
+ gpio_free(host->ncfg->wp_gpio);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_nand_resume(struct platform_device *pdev)
+{
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+ /* Re-enable NAND clock */
+ clk_prepare_enable(host->clk);
+
+ /* Fresh init of NAND controller */
+ lpc32xx_nand_setup(host);
+
+ /* Disable write protect */
+ lpc32xx_wp_disable(host);
+
+ return 0;
+}
+
+static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm)
+{
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+ /* Enable write protect for safety */
+ lpc32xx_wp_enable(host);
+
+ /* Disable clock */
+ clk_disable_unprepare(host->clk);
+ return 0;
+}
+
+#else
+#define lpc32xx_nand_resume NULL
+#define lpc32xx_nand_suspend NULL
+#endif
+
+static const struct of_device_id lpc32xx_nand_match[] = {
+ { .compatible = "nxp,lpc3220-mlc" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_nand_match);
+
+static struct platform_driver lpc32xx_nand_driver = {
+ .probe = lpc32xx_nand_probe,
+ .remove = lpc32xx_nand_remove,
+ .resume = lpc32xx_nand_resume,
+ .suspend = lpc32xx_nand_suspend,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = lpc32xx_nand_match,
+ },
+};
+
+module_platform_driver(lpc32xx_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NAND driver for the NXP LPC32XX MLC controller");
diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c
new file mode 100644
index 0000000..4f3d4eb
--- /dev/null
+++ b/drivers/mtd/nand/lpc32xx_slc.c
@@ -0,0 +1,1015 @@
+/*
+ * NXP LPC32XX NAND SLC driver
+ *
+ * Authors:
+ * Kevin Wells <kevin.wells@nxp.com>
+ * Roland Stigge <stigge@antcom.de>
+ *
+ * Copyright © 2011 NXP Semiconductors
+ * Copyright © 2012 Roland Stigge
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/mm.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/gpio.h>
+#include <linux/of.h>
+#include <linux/of_mtd.h>
+#include <linux/of_gpio.h>
+#include <linux/mtd/lpc32xx_slc.h>
+
+#define LPC32XX_MODNAME "lpc32xx-nand"
+
+/**********************************************************************
+* SLC NAND controller register offsets
+**********************************************************************/
+
+#define SLC_DATA(x) (x + 0x000)
+#define SLC_ADDR(x) (x + 0x004)
+#define SLC_CMD(x) (x + 0x008)
+#define SLC_STOP(x) (x + 0x00C)
+#define SLC_CTRL(x) (x + 0x010)
+#define SLC_CFG(x) (x + 0x014)
+#define SLC_STAT(x) (x + 0x018)
+#define SLC_INT_STAT(x) (x + 0x01C)
+#define SLC_IEN(x) (x + 0x020)
+#define SLC_ISR(x) (x + 0x024)
+#define SLC_ICR(x) (x + 0x028)
+#define SLC_TAC(x) (x + 0x02C)
+#define SLC_TC(x) (x + 0x030)
+#define SLC_ECC(x) (x + 0x034)
+#define SLC_DMA_DATA(x) (x + 0x038)
+
+/**********************************************************************
+* slc_ctrl register definitions
+**********************************************************************/
+#define SLCCTRL_SW_RESET (1 << 2) /* Reset the NAND controller bit */
+#define SLCCTRL_ECC_CLEAR (1 << 1) /* Reset ECC bit */
+#define SLCCTRL_DMA_START (1 << 0) /* Start DMA channel bit */
+
+/**********************************************************************
+* slc_cfg register definitions
+**********************************************************************/
+#define SLCCFG_CE_LOW (1 << 5) /* Force CE low bit */
+#define SLCCFG_DMA_ECC (1 << 4) /* Enable DMA ECC bit */
+#define SLCCFG_ECC_EN (1 << 3) /* ECC enable bit */
+#define SLCCFG_DMA_BURST (1 << 2) /* DMA burst bit */
+#define SLCCFG_DMA_DIR (1 << 1) /* DMA write(0)/read(1) bit */
+#define SLCCFG_WIDTH (1 << 0) /* External device width, 0=8bit */
+
+/**********************************************************************
+* slc_stat register definitions
+**********************************************************************/
+#define SLCSTAT_DMA_FIFO (1 << 2) /* DMA FIFO has data bit */
+#define SLCSTAT_SLC_FIFO (1 << 1) /* SLC FIFO has data bit */
+#define SLCSTAT_NAND_READY (1 << 0) /* NAND device is ready bit */
+
+/**********************************************************************
+* slc_int_stat, slc_ien, slc_isr, and slc_icr register definitions
+**********************************************************************/
+#define SLCSTAT_INT_TC (1 << 1) /* Transfer count bit */
+#define SLCSTAT_INT_RDY_EN (1 << 0) /* Ready interrupt bit */
+
+/**********************************************************************
+* slc_tac register definitions
+**********************************************************************/
+/* Computation of clock cycles on basis of controller and device clock rates */
+#define SLCTAC_CLOCKS(c, n, s) (min_t(u32, DIV_ROUND_UP(c, n) - 1, 0xF) << s)
+
+/* Clock setting for RDY write sample wait time in 2*n clocks */
+#define SLCTAC_WDR(n) (((n) & 0xF) << 28)
+/* Write pulse width in clock cycles, 1 to 16 clocks */
+#define SLCTAC_WWIDTH(c, n) (SLCTAC_CLOCKS(c, n, 24))
+/* Write hold time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_WHOLD(c, n) (SLCTAC_CLOCKS(c, n, 20))
+/* Write setup time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_WSETUP(c, n) (SLCTAC_CLOCKS(c, n, 16))
+/* Clock setting for RDY read sample wait time in 2*n clocks */
+#define SLCTAC_RDR(n) (((n) & 0xF) << 12)
+/* Read pulse width in clock cycles, 1 to 16 clocks */
+#define SLCTAC_RWIDTH(c, n) (SLCTAC_CLOCKS(c, n, 8))
+/* Read hold time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_RHOLD(c, n) (SLCTAC_CLOCKS(c, n, 4))
+/* Read setup time of control and data signals, 1 to 16 clocks */
+#define SLCTAC_RSETUP(c, n) (SLCTAC_CLOCKS(c, n, 0))
+
+/**********************************************************************
+* slc_ecc register definitions
+**********************************************************************/
+/* ECC line party fetch macro */
+#define SLCECC_TO_LINEPAR(n) (((n) >> 6) & 0x7FFF)
+#define SLCECC_TO_COLPAR(n) ((n) & 0x3F)
+
+/*
+ * DMA requires storage space for the DMA local buffer and the hardware ECC
+ * storage area. The DMA local buffer is only used if DMA mapping fails
+ * during runtime.
+ */
+#define LPC32XX_DMA_DATA_SIZE 4096
+#define LPC32XX_ECC_SAVE_SIZE ((4096 / 256) * 4)
+
+/* Number of bytes used for ECC stored in NAND per 256 bytes */
+#define LPC32XX_SLC_DEV_ECC_BYTES 3
+
+/*
+ * If the NAND base clock frequency can't be fetched, this frequency will be
+ * used instead as the base. This rate is used to setup the timing registers
+ * used for NAND accesses.
+ */
+#define LPC32XX_DEF_BUS_RATE 133250000
+
+/* Milliseconds for DMA FIFO timeout (unlikely anyway) */
+#define LPC32XX_DMA_TIMEOUT 100
+
+/*
+ * NAND ECC Layout for small page NAND devices
+ * Note: For large and huge page devices, the default layouts are used
+ */
+static struct nand_ecclayout lpc32xx_nand_oob_16 = {
+ .eccbytes = 6,
+ .eccpos = {10, 11, 12, 13, 14, 15},
+ .oobfree = {
+ { .offset = 0, .length = 4 },
+ { .offset = 6, .length = 4 },
+ },
+};
+
+static u8 bbt_pattern[] = {'B', 'b', 't', '0' };
+static u8 mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+/*
+ * Small page FLASH BBT descriptors, marker at offset 0, version at offset 6
+ * Note: Large page devices used the default layout
+ */
+static struct nand_bbt_descr bbt_smallpage_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 6,
+ .maxblocks = 4,
+ .pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_smallpage_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 6,
+ .maxblocks = 4,
+ .pattern = mirror_pattern
+};
+
+/*
+ * NAND platform configuration structure
+ */
+struct lpc32xx_nand_cfg_slc {
+ uint32_t wdr_clks;
+ uint32_t wwidth;
+ uint32_t whold;
+ uint32_t wsetup;
+ uint32_t rdr_clks;
+ uint32_t rwidth;
+ uint32_t rhold;
+ uint32_t rsetup;
+ bool use_bbt;
+ int wp_gpio;
+ struct mtd_partition *parts;
+ unsigned num_parts;
+};
+
+struct lpc32xx_nand_host {
+ struct nand_chip nand_chip;
+ struct lpc32xx_slc_platform_data *pdata;
+ struct clk *clk;
+ struct mtd_info mtd;
+ void __iomem *io_base;
+ struct lpc32xx_nand_cfg_slc *ncfg;
+
+ struct completion comp;
+ struct dma_chan *dma_chan;
+ uint32_t dma_buf_len;
+ struct dma_slave_config dma_slave_config;
+ struct scatterlist sgl;
+
+ /*
+ * DMA and CPU addresses of ECC work area and data buffer
+ */
+ uint32_t *ecc_buf;
+ uint8_t *data_buf;
+ dma_addr_t io_base_dma;
+};
+
+static void lpc32xx_nand_setup(struct lpc32xx_nand_host *host)
+{
+ uint32_t clkrate, tmp;
+
+ /* Reset SLC controller */
+ writel(SLCCTRL_SW_RESET, SLC_CTRL(host->io_base));
+ udelay(1000);
+
+ /* Basic setup */
+ writel(0, SLC_CFG(host->io_base));
+ writel(0, SLC_IEN(host->io_base));
+ writel((SLCSTAT_INT_TC | SLCSTAT_INT_RDY_EN),
+ SLC_ICR(host->io_base));
+
+ /* Get base clock for SLC block */
+ clkrate = clk_get_rate(host->clk);
+ if (clkrate == 0)
+ clkrate = LPC32XX_DEF_BUS_RATE;
+
+ /* Compute clock setup values */
+ tmp = SLCTAC_WDR(host->ncfg->wdr_clks) |
+ SLCTAC_WWIDTH(clkrate, host->ncfg->wwidth) |
+ SLCTAC_WHOLD(clkrate, host->ncfg->whold) |
+ SLCTAC_WSETUP(clkrate, host->ncfg->wsetup) |
+ SLCTAC_RDR(host->ncfg->rdr_clks) |
+ SLCTAC_RWIDTH(clkrate, host->ncfg->rwidth) |
+ SLCTAC_RHOLD(clkrate, host->ncfg->rhold) |
+ SLCTAC_RSETUP(clkrate, host->ncfg->rsetup);
+ writel(tmp, SLC_TAC(host->io_base));
+}
+
+/*
+ * Hardware specific access to control lines
+ */
+static void lpc32xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ uint32_t tmp;
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ /* Does CE state need to be changed? */
+ tmp = readl(SLC_CFG(host->io_base));
+ if (ctrl & NAND_NCE)
+ tmp |= SLCCFG_CE_LOW;
+ else
+ tmp &= ~SLCCFG_CE_LOW;
+ writel(tmp, SLC_CFG(host->io_base));
+
+ if (cmd != NAND_CMD_NONE) {
+ if (ctrl & NAND_CLE)
+ writel(cmd, SLC_CMD(host->io_base));
+ else
+ writel(cmd, SLC_ADDR(host->io_base));
+ }
+}
+
+/*
+ * Read the Device Ready pin
+ */
+static int lpc32xx_nand_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+ int rdy = 0;
+
+ if ((readl(SLC_STAT(host->io_base)) & SLCSTAT_NAND_READY) != 0)
+ rdy = 1;
+
+ return rdy;
+}
+
+/*
+ * Enable NAND write protect
+ */
+static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host)
+{
+ if (gpio_is_valid(host->ncfg->wp_gpio))
+ gpio_set_value(host->ncfg->wp_gpio, 0);
+}
+
+/*
+ * Disable NAND write protect
+ */
+static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host)
+{
+ if (gpio_is_valid(host->ncfg->wp_gpio))
+ gpio_set_value(host->ncfg->wp_gpio, 1);
+}
+
+/*
+ * Prepares SLC for transfers with H/W ECC enabled
+ */
+static void lpc32xx_nand_ecc_enable(struct mtd_info *mtd, int mode)
+{
+ /* Hardware ECC is enabled automatically in hardware as needed */
+}
+
+/*
+ * Calculates the ECC for the data
+ */
+static int lpc32xx_nand_ecc_calculate(struct mtd_info *mtd,
+ const unsigned char *buf,
+ unsigned char *code)
+{
+ /*
+ * ECC is calculated automatically in hardware during syndrome read
+ * and write operations, so it doesn't need to be calculated here.
+ */
+ return 0;
+}
+
+/*
+ * Read a single byte from NAND device
+ */
+static uint8_t lpc32xx_nand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ return (uint8_t)readl(SLC_DATA(host->io_base));
+}
+
+/*
+ * Simple device read without ECC
+ */
+static void lpc32xx_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ /* Direct device read with no ECC */
+ while (len-- > 0)
+ *buf++ = (uint8_t)readl(SLC_DATA(host->io_base));
+}
+
+/*
+ * Simple device write without ECC
+ */
+static void lpc32xx_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+
+ /* Direct device write with no ECC */
+ while (len-- > 0)
+ writel((uint32_t)*buf++, SLC_DATA(host->io_base));
+}
+
+/*
+ * Read the OOB data from the device without ECC using FIFO method
+ */
+static int lpc32xx_nand_read_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+/*
+ * Write the OOB data to the device without ECC using FIFO method
+ */
+static int lpc32xx_nand_write_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ int status;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /* Send command to program the OOB data */
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/*
+ * Fills in the ECC fields in the OOB buffer with the hardware generated ECC
+ */
+static void lpc32xx_slc_ecc_copy(uint8_t *spare, const uint32_t *ecc, int count)
+{
+ int i;
+
+ for (i = 0; i < (count * 3); i += 3) {
+ uint32_t ce = ecc[i / 3];
+ ce = ~(ce << 2) & 0xFFFFFF;
+ spare[i + 2] = (uint8_t)(ce & 0xFF);
+ ce >>= 8;
+ spare[i + 1] = (uint8_t)(ce & 0xFF);
+ ce >>= 8;
+ spare[i] = (uint8_t)(ce & 0xFF);
+ }
+}
+
+static void lpc32xx_dma_complete_func(void *completion)
+{
+ complete(completion);
+}
+
+static int lpc32xx_xmit_dma(struct mtd_info *mtd, dma_addr_t dma,
+ void *mem, int len, enum dma_transfer_direction dir)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+ struct dma_async_tx_descriptor *desc;
+ int flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+ int res;
+
+ host->dma_slave_config.direction = dir;
+ host->dma_slave_config.src_addr = dma;
+ host->dma_slave_config.dst_addr = dma;
+ host->dma_slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_slave_config.src_maxburst = 4;
+ host->dma_slave_config.dst_maxburst = 4;
+ /* DMA controller does flow control: */
+ host->dma_slave_config.device_fc = false;
+ if (dmaengine_slave_config(host->dma_chan, &host->dma_slave_config)) {
+ dev_err(mtd->dev.parent, "Failed to setup DMA slave\n");
+ return -ENXIO;
+ }
+
+ sg_init_one(&host->sgl, mem, len);
+
+ res = dma_map_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+ if (res != 1) {
+ dev_err(mtd->dev.parent, "Failed to map sg list\n");
+ return -ENXIO;
+ }
+ desc = dmaengine_prep_slave_sg(host->dma_chan, &host->sgl, 1, dir,
+ flags);
+ if (!desc) {
+ dev_err(mtd->dev.parent, "Failed to prepare slave sg\n");
+ goto out1;
+ }
+
+ init_completion(&host->comp);
+ desc->callback = lpc32xx_dma_complete_func;
+ desc->callback_param = &host->comp;
+
+ dmaengine_submit(desc);
+ dma_async_issue_pending(host->dma_chan);
+
+ wait_for_completion_timeout(&host->comp, msecs_to_jiffies(1000));
+
+ dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+
+ return 0;
+out1:
+ dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1,
+ DMA_BIDIRECTIONAL);
+ return -ENXIO;
+}
+
+/*
+ * DMA read/write transfers with ECC support
+ */
+static int lpc32xx_xfer(struct mtd_info *mtd, uint8_t *buf, int eccsubpages,
+ int read)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct lpc32xx_nand_host *host = chip->priv;
+ int i, status = 0;
+ unsigned long timeout;
+ int res;
+ enum dma_transfer_direction dir =
+ read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV;
+ uint8_t *dma_buf;
+ bool dma_mapped;
+
+ if ((void *)buf <= high_memory) {
+ dma_buf = buf;
+ dma_mapped = true;
+ } else {
+ dma_buf = host->data_buf;
+ dma_mapped = false;
+ if (!read)
+ memcpy(host->data_buf, buf, mtd->writesize);
+ }
+
+ if (read) {
+ writel(readl(SLC_CFG(host->io_base)) |
+ SLCCFG_DMA_DIR | SLCCFG_ECC_EN | SLCCFG_DMA_ECC |
+ SLCCFG_DMA_BURST, SLC_CFG(host->io_base));
+ } else {
+ writel((readl(SLC_CFG(host->io_base)) |
+ SLCCFG_ECC_EN | SLCCFG_DMA_ECC | SLCCFG_DMA_BURST) &
+ ~SLCCFG_DMA_DIR,
+ SLC_CFG(host->io_base));
+ }
+
+ /* Clear initial ECC */
+ writel(SLCCTRL_ECC_CLEAR, SLC_CTRL(host->io_base));
+
+ /* Transfer size is data area only */
+ writel(mtd->writesize, SLC_TC(host->io_base));
+
+ /* Start transfer in the NAND controller */
+ writel(readl(SLC_CTRL(host->io_base)) | SLCCTRL_DMA_START,
+ SLC_CTRL(host->io_base));
+
+ for (i = 0; i < chip->ecc.steps; i++) {
+ /* Data */
+ res = lpc32xx_xmit_dma(mtd, SLC_DMA_DATA(host->io_base_dma),
+ dma_buf + i * chip->ecc.size,
+ mtd->writesize / chip->ecc.steps, dir);
+ if (res)
+ return res;
+
+ /* Always _read_ ECC */
+ if (i == chip->ecc.steps - 1)
+ break;
+ if (!read) /* ECC availability delayed on write */
+ udelay(10);
+ res = lpc32xx_xmit_dma(mtd, SLC_ECC(host->io_base_dma),
+ &host->ecc_buf[i], 4, DMA_DEV_TO_MEM);
+ if (res)
+ return res;
+ }
+
+ /*
+ * According to NXP, the DMA can be finished here, but the NAND
+ * controller may still have buffered data. After porting to using the
+ * dmaengine DMA driver (amba-pl080), the condition (DMA_FIFO empty)
+ * appears to be always true, according to tests. Keeping the check for
+ * safety reasons for now.
+ */
+ if (readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO) {
+ dev_warn(mtd->dev.parent, "FIFO not empty!\n");
+ timeout = jiffies + msecs_to_jiffies(LPC32XX_DMA_TIMEOUT);
+ while ((readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO) &&
+ time_before(jiffies, timeout))
+ cpu_relax();
+ if (!time_before(jiffies, timeout)) {
+ dev_err(mtd->dev.parent, "FIFO held data too long\n");
+ status = -EIO;
+ }
+ }
+
+ /* Read last calculated ECC value */
+ if (!read)
+ udelay(10);
+ host->ecc_buf[chip->ecc.steps - 1] =
+ readl(SLC_ECC(host->io_base));
+
+ /* Flush DMA */
+ dmaengine_terminate_all(host->dma_chan);
+
+ if (readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO ||
+ readl(SLC_TC(host->io_base))) {
+ /* Something is left in the FIFO, something is wrong */
+ dev_err(mtd->dev.parent, "DMA FIFO failure\n");
+ status = -EIO;
+ }
+
+ /* Stop DMA & HW ECC */
+ writel(readl(SLC_CTRL(host->io_base)) & ~SLCCTRL_DMA_START,
+ SLC_CTRL(host->io_base));
+ writel(readl(SLC_CFG(host->io_base)) &
+ ~(SLCCFG_DMA_DIR | SLCCFG_ECC_EN | SLCCFG_DMA_ECC |
+ SLCCFG_DMA_BURST), SLC_CFG(host->io_base));
+
+ if (!dma_mapped && read)
+ memcpy(buf, host->data_buf, mtd->writesize);
+
+ return status;
+}
+
+/*
+ * Read the data and OOB data from the device, use ECC correction with the
+ * data, disable ECC for the OOB data
+ */
+static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+ int stat, i, status;
+ uint8_t *oobecc, tmpecc[LPC32XX_ECC_SAVE_SIZE];
+
+ /* Issue read command */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ /* Read data and oob, calculate ECC */
+ status = lpc32xx_xfer(mtd, buf, chip->ecc.steps, 1);
+
+ /* Get OOB data */
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /* Convert to stored ECC format */
+ lpc32xx_slc_ecc_copy(tmpecc, (uint32_t *) host->ecc_buf, chip->ecc.steps);
+
+ /* Pointer to ECC data retrieved from NAND spare area */
+ oobecc = chip->oob_poi + chip->ecc.layout->eccpos[0];
+
+ for (i = 0; i < chip->ecc.steps; i++) {
+ stat = chip->ecc.correct(mtd, buf, oobecc,
+ &tmpecc[i * chip->ecc.bytes]);
+ if (stat < 0)
+ mtd->ecc_stats.failed++;
+ else
+ mtd->ecc_stats.corrected += stat;
+
+ buf += chip->ecc.size;
+ oobecc += chip->ecc.bytes;
+ }
+
+ return status;
+}
+
+/*
+ * Read the data and OOB data from the device, no ECC correction with the
+ * data or OOB data
+ */
+static int lpc32xx_nand_read_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf, int oob_required,
+ int page)
+{
+ /* Issue read command */
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ /* Raw reads can just use the FIFO interface */
+ chip->read_buf(mtd, buf, chip->ecc.size * chip->ecc.steps);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+/*
+ * Write the data and OOB data to the device, use ECC with the data,
+ * disable ECC for the OOB data
+ */
+static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf,
+ int oob_required, int page)
+{
+ struct lpc32xx_nand_host *host = chip->priv;
+ uint8_t *pb = chip->oob_poi + chip->ecc.layout->eccpos[0];
+ int error;
+
+ /* Write data, calculate ECC on outbound data */
+ error = lpc32xx_xfer(mtd, (uint8_t *)buf, chip->ecc.steps, 0);
+ if (error)
+ return error;
+
+ /*
+ * The calculated ECC needs some manual work done to it before
+ * committing it to NAND. Process the calculated ECC and place
+ * the resultant values directly into the OOB buffer. */
+ lpc32xx_slc_ecc_copy(pb, (uint32_t *)host->ecc_buf, chip->ecc.steps);
+
+ /* Write ECC data to device */
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+/*
+ * Write the data and OOB data to the device, no ECC correction with the
+ * data or OOB data
+ */
+static int lpc32xx_nand_write_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf,
+ int oob_required, int page)
+{
+ /* Raw writes can just use the FIFO interface */
+ chip->write_buf(mtd, buf, chip->ecc.size * chip->ecc.steps);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+static int lpc32xx_nand_dma_setup(struct lpc32xx_nand_host *host)
+{
+ struct mtd_info *mtd = &host->mtd;
+ dma_cap_mask_t mask;
+
+ if (!host->pdata || !host->pdata->dma_filter) {
+ dev_err(mtd->dev.parent, "no DMA platform data\n");
+ return -ENOENT;
+ }
+
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ host->dma_chan = dma_request_channel(mask, host->pdata->dma_filter,
+ "nand-slc");
+ if (!host->dma_chan) {
+ dev_err(mtd->dev.parent, "Failed to request DMA channel\n");
+ return -EBUSY;
+ }
+
+ return 0;
+}
+
+static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev)
+{
+ struct lpc32xx_nand_cfg_slc *ncfg;
+ struct device_node *np = dev->of_node;
+
+ ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL);
+ if (!ncfg)
+ return NULL;
+
+ of_property_read_u32(np, "nxp,wdr-clks", &ncfg->wdr_clks);
+ of_property_read_u32(np, "nxp,wwidth", &ncfg->wwidth);
+ of_property_read_u32(np, "nxp,whold", &ncfg->whold);
+ of_property_read_u32(np, "nxp,wsetup", &ncfg->wsetup);
+ of_property_read_u32(np, "nxp,rdr-clks", &ncfg->rdr_clks);
+ of_property_read_u32(np, "nxp,rwidth", &ncfg->rwidth);
+ of_property_read_u32(np, "nxp,rhold", &ncfg->rhold);
+ of_property_read_u32(np, "nxp,rsetup", &ncfg->rsetup);
+
+ if (!ncfg->wdr_clks || !ncfg->wwidth || !ncfg->whold ||
+ !ncfg->wsetup || !ncfg->rdr_clks || !ncfg->rwidth ||
+ !ncfg->rhold || !ncfg->rsetup) {
+ dev_err(dev, "chip parameters not specified correctly\n");
+ return NULL;
+ }
+
+ ncfg->use_bbt = of_get_nand_on_flash_bbt(np);
+ ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0);
+
+ return ncfg;
+}
+
+/*
+ * Probe for NAND controller
+ */
+static int lpc32xx_nand_probe(struct platform_device *pdev)
+{
+ struct lpc32xx_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *chip;
+ struct resource *rc;
+ struct mtd_part_parser_data ppdata = {};
+ int res;
+
+ rc = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (rc == NULL) {
+ dev_err(&pdev->dev, "No memory resource found for device\n");
+ return -EBUSY;
+ }
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+ host->io_base_dma = rc->start;
+
+ host->io_base = devm_ioremap_resource(&pdev->dev, rc);
+ if (IS_ERR(host->io_base))
+ return PTR_ERR(host->io_base);
+
+ if (pdev->dev.of_node)
+ host->ncfg = lpc32xx_parse_dt(&pdev->dev);
+ if (!host->ncfg) {
+ dev_err(&pdev->dev,
+ "Missing or bad NAND config from device tree\n");
+ return -ENOENT;
+ }
+ if (host->ncfg->wp_gpio == -EPROBE_DEFER)
+ return -EPROBE_DEFER;
+ if (gpio_is_valid(host->ncfg->wp_gpio) && devm_gpio_request(&pdev->dev,
+ host->ncfg->wp_gpio, "NAND WP")) {
+ dev_err(&pdev->dev, "GPIO not available\n");
+ return -EBUSY;
+ }
+ lpc32xx_wp_disable(host);
+
+ host->pdata = dev_get_platdata(&pdev->dev);
+
+ mtd = &host->mtd;
+ chip = &host->nand_chip;
+ chip->priv = host;
+ mtd->priv = chip;
+ mtd->owner = THIS_MODULE;
+ mtd->dev.parent = &pdev->dev;
+
+ /* Get NAND clock */
+ host->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk)) {
+ dev_err(&pdev->dev, "Clock failure\n");
+ res = -ENOENT;
+ goto err_exit1;
+ }
+ clk_prepare_enable(host->clk);
+
+ /* Set NAND IO addresses and command/ready functions */
+ chip->IO_ADDR_R = SLC_DATA(host->io_base);
+ chip->IO_ADDR_W = SLC_DATA(host->io_base);
+ chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl;
+ chip->dev_ready = lpc32xx_nand_device_ready;
+ chip->chip_delay = 20; /* 20us command delay time */
+
+ /* Init NAND controller */
+ lpc32xx_nand_setup(host);
+
+ platform_set_drvdata(pdev, host);
+
+ /* NAND callbacks for LPC32xx SLC hardware */
+ chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->read_byte = lpc32xx_nand_read_byte;
+ chip->read_buf = lpc32xx_nand_read_buf;
+ chip->write_buf = lpc32xx_nand_write_buf;
+ chip->ecc.read_page_raw = lpc32xx_nand_read_page_raw_syndrome;
+ chip->ecc.read_page = lpc32xx_nand_read_page_syndrome;
+ chip->ecc.write_page_raw = lpc32xx_nand_write_page_raw_syndrome;
+ chip->ecc.write_page = lpc32xx_nand_write_page_syndrome;
+ chip->ecc.write_oob = lpc32xx_nand_write_oob_syndrome;
+ chip->ecc.read_oob = lpc32xx_nand_read_oob_syndrome;
+ chip->ecc.calculate = lpc32xx_nand_ecc_calculate;
+ chip->ecc.correct = nand_correct_data;
+ chip->ecc.strength = 1;
+ chip->ecc.hwctl = lpc32xx_nand_ecc_enable;
+
+ /*
+ * Allocate a large enough buffer for a single huge page plus
+ * extra space for the spare area and ECC storage area
+ */
+ host->dma_buf_len = LPC32XX_DMA_DATA_SIZE + LPC32XX_ECC_SAVE_SIZE;
+ host->data_buf = devm_kzalloc(&pdev->dev, host->dma_buf_len,
+ GFP_KERNEL);
+ if (host->data_buf == NULL) {
+ res = -ENOMEM;
+ goto err_exit2;
+ }
+
+ res = lpc32xx_nand_dma_setup(host);
+ if (res) {
+ res = -EIO;
+ goto err_exit2;
+ }
+
+ /* Find NAND device */
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ res = -ENXIO;
+ goto err_exit3;
+ }
+
+ /* OOB and ECC CPU and DMA work areas */
+ host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE);
+
+ /*
+ * Small page FLASH has a unique OOB layout, but large and huge
+ * page FLASH use the standard layout. Small page FLASH uses a
+ * custom BBT marker layout.
+ */
+ if (mtd->writesize <= 512)
+ chip->ecc.layout = &lpc32xx_nand_oob_16;
+
+ /* These sizes remain the same regardless of page size */
+ chip->ecc.size = 256;
+ chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES;
+ chip->ecc.prepad = chip->ecc.postpad = 0;
+
+ /* Avoid extra scan if using BBT, setup BBT support */
+ if (host->ncfg->use_bbt) {
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+ /*
+ * Use a custom BBT marker setup for small page FLASH that
+ * won't interfere with the ECC layout. Large and huge page
+ * FLASH use the standard layout.
+ */
+ if (mtd->writesize <= 512) {
+ chip->bbt_td = &bbt_smallpage_main_descr;
+ chip->bbt_md = &bbt_smallpage_mirror_descr;
+ }
+ }
+
+ /*
+ * Fills out all the uninitialized function pointers with the defaults
+ */
+ if (nand_scan_tail(mtd)) {
+ res = -ENXIO;
+ goto err_exit3;
+ }
+
+ mtd->name = "nxp_lpc3220_slc";
+ ppdata.of_node = pdev->dev.of_node;
+ res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts,
+ host->ncfg->num_parts);
+ if (!res)
+ return res;
+
+ nand_release(mtd);
+
+err_exit3:
+ dma_release_channel(host->dma_chan);
+err_exit2:
+ clk_disable_unprepare(host->clk);
+err_exit1:
+ lpc32xx_wp_enable(host);
+
+ return res;
+}
+
+/*
+ * Remove NAND device.
+ */
+static int lpc32xx_nand_remove(struct platform_device *pdev)
+{
+ uint32_t tmp;
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = &host->mtd;
+
+ nand_release(mtd);
+ dma_release_channel(host->dma_chan);
+
+ /* Force CE high */
+ tmp = readl(SLC_CTRL(host->io_base));
+ tmp &= ~SLCCFG_CE_LOW;
+ writel(tmp, SLC_CTRL(host->io_base));
+
+ clk_disable_unprepare(host->clk);
+ lpc32xx_wp_enable(host);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int lpc32xx_nand_resume(struct platform_device *pdev)
+{
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+ /* Re-enable NAND clock */
+ clk_prepare_enable(host->clk);
+
+ /* Fresh init of NAND controller */
+ lpc32xx_nand_setup(host);
+
+ /* Disable write protect */
+ lpc32xx_wp_disable(host);
+
+ return 0;
+}
+
+static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm)
+{
+ uint32_t tmp;
+ struct lpc32xx_nand_host *host = platform_get_drvdata(pdev);
+
+ /* Force CE high */
+ tmp = readl(SLC_CTRL(host->io_base));
+ tmp &= ~SLCCFG_CE_LOW;
+ writel(tmp, SLC_CTRL(host->io_base));
+
+ /* Enable write protect for safety */
+ lpc32xx_wp_enable(host);
+
+ /* Disable clock */
+ clk_disable_unprepare(host->clk);
+
+ return 0;
+}
+
+#else
+#define lpc32xx_nand_resume NULL
+#define lpc32xx_nand_suspend NULL
+#endif
+
+static const struct of_device_id lpc32xx_nand_match[] = {
+ { .compatible = "nxp,lpc3220-slc" },
+ { /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, lpc32xx_nand_match);
+
+static struct platform_driver lpc32xx_nand_driver = {
+ .probe = lpc32xx_nand_probe,
+ .remove = lpc32xx_nand_remove,
+ .resume = lpc32xx_nand_resume,
+ .suspend = lpc32xx_nand_suspend,
+ .driver = {
+ .name = LPC32XX_MODNAME,
+ .of_match_table = lpc32xx_nand_match,
+ },
+};
+
+module_platform_driver(lpc32xx_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>");
+MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>");
+MODULE_DESCRIPTION("NAND driver for the NXP LPC32XX SLC controller");
diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c
new file mode 100644
index 0000000..d6bbde4
--- /dev/null
+++ b/drivers/mtd/nand/mpc5121_nfc.c
@@ -0,0 +1,860 @@
+/*
+ * Copyright 2004-2008 Freescale Semiconductor, Inc.
+ * Copyright 2009 Semihalf.
+ *
+ * Approved as OSADL project by a majority of OSADL members and funded
+ * by OSADL membership fees in 2009; for details see www.osadl.org.
+ *
+ * Based on original driver from Freescale Semiconductor
+ * written by John Rigby <jrigby@freescale.com> on basis
+ * of drivers/mtd/nand/mxc_nand.c. Reworked and extended
+ * Piotr Ziecik <kosmo@semihalf.com>.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/module.h>
+#include <linux/clk.h>
+#include <linux/gfp.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+
+#include <asm/mpc5121.h>
+
+/* Addresses for NFC MAIN RAM BUFFER areas */
+#define NFC_MAIN_AREA(n) ((n) * 0x200)
+
+/* Addresses for NFC SPARE BUFFER areas */
+#define NFC_SPARE_BUFFERS 8
+#define NFC_SPARE_LEN 0x40
+#define NFC_SPARE_AREA(n) (0x1000 + ((n) * NFC_SPARE_LEN))
+
+/* MPC5121 NFC registers */
+#define NFC_BUF_ADDR 0x1E04
+#define NFC_FLASH_ADDR 0x1E06
+#define NFC_FLASH_CMD 0x1E08
+#define NFC_CONFIG 0x1E0A
+#define NFC_ECC_STATUS1 0x1E0C
+#define NFC_ECC_STATUS2 0x1E0E
+#define NFC_SPAS 0x1E10
+#define NFC_WRPROT 0x1E12
+#define NFC_NF_WRPRST 0x1E18
+#define NFC_CONFIG1 0x1E1A
+#define NFC_CONFIG2 0x1E1C
+#define NFC_UNLOCKSTART_BLK0 0x1E20
+#define NFC_UNLOCKEND_BLK0 0x1E22
+#define NFC_UNLOCKSTART_BLK1 0x1E24
+#define NFC_UNLOCKEND_BLK1 0x1E26
+#define NFC_UNLOCKSTART_BLK2 0x1E28
+#define NFC_UNLOCKEND_BLK2 0x1E2A
+#define NFC_UNLOCKSTART_BLK3 0x1E2C
+#define NFC_UNLOCKEND_BLK3 0x1E2E
+
+/* Bit Definitions: NFC_BUF_ADDR */
+#define NFC_RBA_MASK (7 << 0)
+#define NFC_ACTIVE_CS_SHIFT 5
+#define NFC_ACTIVE_CS_MASK (3 << NFC_ACTIVE_CS_SHIFT)
+
+/* Bit Definitions: NFC_CONFIG */
+#define NFC_BLS_UNLOCKED (1 << 1)
+
+/* Bit Definitions: NFC_CONFIG1 */
+#define NFC_ECC_4BIT (1 << 0)
+#define NFC_FULL_PAGE_DMA (1 << 1)
+#define NFC_SPARE_ONLY (1 << 2)
+#define NFC_ECC_ENABLE (1 << 3)
+#define NFC_INT_MASK (1 << 4)
+#define NFC_BIG_ENDIAN (1 << 5)
+#define NFC_RESET (1 << 6)
+#define NFC_CE (1 << 7)
+#define NFC_ONE_CYCLE (1 << 8)
+#define NFC_PPB_32 (0 << 9)
+#define NFC_PPB_64 (1 << 9)
+#define NFC_PPB_128 (2 << 9)
+#define NFC_PPB_256 (3 << 9)
+#define NFC_PPB_MASK (3 << 9)
+#define NFC_FULL_PAGE_INT (1 << 11)
+
+/* Bit Definitions: NFC_CONFIG2 */
+#define NFC_COMMAND (1 << 0)
+#define NFC_ADDRESS (1 << 1)
+#define NFC_INPUT (1 << 2)
+#define NFC_OUTPUT (1 << 3)
+#define NFC_ID (1 << 4)
+#define NFC_STATUS (1 << 5)
+#define NFC_CMD_FAIL (1 << 15)
+#define NFC_INT (1 << 15)
+
+/* Bit Definitions: NFC_WRPROT */
+#define NFC_WPC_LOCK_TIGHT (1 << 0)
+#define NFC_WPC_LOCK (1 << 1)
+#define NFC_WPC_UNLOCK (1 << 2)
+
+#define DRV_NAME "mpc5121_nfc"
+
+/* Timeouts */
+#define NFC_RESET_TIMEOUT 1000 /* 1 ms */
+#define NFC_TIMEOUT (HZ / 10) /* 1/10 s */
+
+struct mpc5121_nfc_prv {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ int irq;
+ void __iomem *regs;
+ struct clk *clk;
+ wait_queue_head_t irq_waitq;
+ uint column;
+ int spareonly;
+ void __iomem *csreg;
+ struct device *dev;
+};
+
+static void mpc5121_nfc_done(struct mtd_info *mtd);
+
+/* Read NFC register */
+static inline u16 nfc_read(struct mtd_info *mtd, uint reg)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ return in_be16(prv->regs + reg);
+}
+
+/* Write NFC register */
+static inline void nfc_write(struct mtd_info *mtd, uint reg, u16 val)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ out_be16(prv->regs + reg, val);
+}
+
+/* Set bits in NFC register */
+static inline void nfc_set(struct mtd_info *mtd, uint reg, u16 bits)
+{
+ nfc_write(mtd, reg, nfc_read(mtd, reg) | bits);
+}
+
+/* Clear bits in NFC register */
+static inline void nfc_clear(struct mtd_info *mtd, uint reg, u16 bits)
+{
+ nfc_write(mtd, reg, nfc_read(mtd, reg) & ~bits);
+}
+
+/* Invoke address cycle */
+static inline void mpc5121_nfc_send_addr(struct mtd_info *mtd, u16 addr)
+{
+ nfc_write(mtd, NFC_FLASH_ADDR, addr);
+ nfc_write(mtd, NFC_CONFIG2, NFC_ADDRESS);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Invoke command cycle */
+static inline void mpc5121_nfc_send_cmd(struct mtd_info *mtd, u16 cmd)
+{
+ nfc_write(mtd, NFC_FLASH_CMD, cmd);
+ nfc_write(mtd, NFC_CONFIG2, NFC_COMMAND);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Send data from NFC buffers to NAND flash */
+static inline void mpc5121_nfc_send_prog_page(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_INPUT);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Receive data from NAND flash */
+static inline void mpc5121_nfc_send_read_page(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_OUTPUT);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Receive ID from NAND flash */
+static inline void mpc5121_nfc_send_read_id(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_ID);
+ mpc5121_nfc_done(mtd);
+}
+
+/* Receive status from NAND flash */
+static inline void mpc5121_nfc_send_read_status(struct mtd_info *mtd)
+{
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK);
+ nfc_write(mtd, NFC_CONFIG2, NFC_STATUS);
+ mpc5121_nfc_done(mtd);
+}
+
+/* NFC interrupt handler */
+static irqreturn_t mpc5121_nfc_irq(int irq, void *data)
+{
+ struct mtd_info *mtd = data;
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ nfc_set(mtd, NFC_CONFIG1, NFC_INT_MASK);
+ wake_up(&prv->irq_waitq);
+
+ return IRQ_HANDLED;
+}
+
+/* Wait for operation complete */
+static void mpc5121_nfc_done(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+ int rv;
+
+ if ((nfc_read(mtd, NFC_CONFIG2) & NFC_INT) == 0) {
+ nfc_clear(mtd, NFC_CONFIG1, NFC_INT_MASK);
+ rv = wait_event_timeout(prv->irq_waitq,
+ (nfc_read(mtd, NFC_CONFIG2) & NFC_INT), NFC_TIMEOUT);
+
+ if (!rv)
+ dev_warn(prv->dev,
+ "Timeout while waiting for interrupt.\n");
+ }
+
+ nfc_clear(mtd, NFC_CONFIG2, NFC_INT);
+}
+
+/* Do address cycle(s) */
+static void mpc5121_nfc_addr_cycle(struct mtd_info *mtd, int column, int page)
+{
+ struct nand_chip *chip = mtd->priv;
+ u32 pagemask = chip->pagemask;
+
+ if (column != -1) {
+ mpc5121_nfc_send_addr(mtd, column);
+ if (mtd->writesize > 512)
+ mpc5121_nfc_send_addr(mtd, column >> 8);
+ }
+
+ if (page != -1) {
+ do {
+ mpc5121_nfc_send_addr(mtd, page & 0xFF);
+ page >>= 8;
+ pagemask >>= 8;
+ } while (pagemask);
+ }
+}
+
+/* Control chip select signals */
+static void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+ if (chip < 0) {
+ nfc_clear(mtd, NFC_CONFIG1, NFC_CE);
+ return;
+ }
+
+ nfc_clear(mtd, NFC_BUF_ADDR, NFC_ACTIVE_CS_MASK);
+ nfc_set(mtd, NFC_BUF_ADDR, (chip << NFC_ACTIVE_CS_SHIFT) &
+ NFC_ACTIVE_CS_MASK);
+ nfc_set(mtd, NFC_CONFIG1, NFC_CE);
+}
+
+/* Init external chip select logic on ADS5121 board */
+static int ads5121_chipselect_init(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+ struct device_node *dn;
+
+ dn = of_find_compatible_node(NULL, NULL, "fsl,mpc5121ads-cpld");
+ if (dn) {
+ prv->csreg = of_iomap(dn, 0);
+ of_node_put(dn);
+ if (!prv->csreg)
+ return -ENOMEM;
+
+ /* CPLD Register 9 controls NAND /CE Lines */
+ prv->csreg += 9;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/* Control chips select signal on ADS5121 board */
+static void ads5121_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mpc5121_nfc_prv *prv = nand->priv;
+ u8 v;
+
+ v = in_8(prv->csreg);
+ v |= 0x0F;
+
+ if (chip >= 0) {
+ mpc5121_nfc_select_chip(mtd, 0);
+ v &= ~(1 << chip);
+ } else
+ mpc5121_nfc_select_chip(mtd, -1);
+
+ out_8(prv->csreg, v);
+}
+
+/* Read NAND Ready/Busy signal */
+static int mpc5121_nfc_dev_ready(struct mtd_info *mtd)
+{
+ /*
+ * NFC handles ready/busy signal internally. Therefore, this function
+ * always returns status as ready.
+ */
+ return 1;
+}
+
+/* Write command to NAND flash */
+static void mpc5121_nfc_command(struct mtd_info *mtd, unsigned command,
+ int column, int page)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ prv->column = (column >= 0) ? column : 0;
+ prv->spareonly = 0;
+
+ switch (command) {
+ case NAND_CMD_PAGEPROG:
+ mpc5121_nfc_send_prog_page(mtd);
+ break;
+ /*
+ * NFC does not support sub-page reads and writes,
+ * so emulate them using full page transfers.
+ */
+ case NAND_CMD_READ0:
+ column = 0;
+ break;
+
+ case NAND_CMD_READ1:
+ prv->column += 256;
+ command = NAND_CMD_READ0;
+ column = 0;
+ break;
+
+ case NAND_CMD_READOOB:
+ prv->spareonly = 1;
+ command = NAND_CMD_READ0;
+ column = 0;
+ break;
+
+ case NAND_CMD_SEQIN:
+ mpc5121_nfc_command(mtd, NAND_CMD_READ0, column, page);
+ column = 0;
+ break;
+
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_READID:
+ case NAND_CMD_STATUS:
+ break;
+
+ default:
+ return;
+ }
+
+ mpc5121_nfc_send_cmd(mtd, command);
+ mpc5121_nfc_addr_cycle(mtd, column, page);
+
+ switch (command) {
+ case NAND_CMD_READ0:
+ if (mtd->writesize > 512)
+ mpc5121_nfc_send_cmd(mtd, NAND_CMD_READSTART);
+ mpc5121_nfc_send_read_page(mtd);
+ break;
+
+ case NAND_CMD_READID:
+ mpc5121_nfc_send_read_id(mtd);
+ break;
+
+ case NAND_CMD_STATUS:
+ mpc5121_nfc_send_read_status(mtd);
+ if (chip->options & NAND_BUSWIDTH_16)
+ prv->column = 1;
+ else
+ prv->column = 0;
+ break;
+ }
+}
+
+/* Copy data from/to NFC spare buffers. */
+static void mpc5121_nfc_copy_spare(struct mtd_info *mtd, uint offset,
+ u8 *buffer, uint size, int wr)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct mpc5121_nfc_prv *prv = nand->priv;
+ uint o, s, sbsize, blksize;
+
+ /*
+ * NAND spare area is available through NFC spare buffers.
+ * The NFC divides spare area into (page_size / 512) chunks.
+ * Each chunk is placed into separate spare memory area, using
+ * first (spare_size / num_of_chunks) bytes of the buffer.
+ *
+ * For NAND device in which the spare area is not divided fully
+ * by the number of chunks, number of used bytes in each spare
+ * buffer is rounded down to the nearest even number of bytes,
+ * and all remaining bytes are added to the last used spare area.
+ *
+ * For more information read section 26.6.10 of MPC5121e
+ * Microcontroller Reference Manual, Rev. 3.
+ */
+
+ /* Calculate number of valid bytes in each spare buffer */
+ sbsize = (mtd->oobsize / (mtd->writesize / 512)) & ~1;
+
+ while (size) {
+ /* Calculate spare buffer number */
+ s = offset / sbsize;
+ if (s > NFC_SPARE_BUFFERS - 1)
+ s = NFC_SPARE_BUFFERS - 1;
+
+ /*
+ * Calculate offset to requested data block in selected spare
+ * buffer and its size.
+ */
+ o = offset - (s * sbsize);
+ blksize = min(sbsize - o, size);
+
+ if (wr)
+ memcpy_toio(prv->regs + NFC_SPARE_AREA(s) + o,
+ buffer, blksize);
+ else
+ memcpy_fromio(buffer,
+ prv->regs + NFC_SPARE_AREA(s) + o, blksize);
+
+ buffer += blksize;
+ offset += blksize;
+ size -= blksize;
+ };
+}
+
+/* Copy data from/to NFC main and spare buffers */
+static void mpc5121_nfc_buf_copy(struct mtd_info *mtd, u_char *buf, int len,
+ int wr)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+ uint c = prv->column;
+ uint l;
+
+ /* Handle spare area access */
+ if (prv->spareonly || c >= mtd->writesize) {
+ /* Calculate offset from beginning of spare area */
+ if (c >= mtd->writesize)
+ c -= mtd->writesize;
+
+ prv->column += len;
+ mpc5121_nfc_copy_spare(mtd, c, buf, len, wr);
+ return;
+ }
+
+ /*
+ * Handle main area access - limit copy length to prevent
+ * crossing main/spare boundary.
+ */
+ l = min((uint)len, mtd->writesize - c);
+ prv->column += l;
+
+ if (wr)
+ memcpy_toio(prv->regs + NFC_MAIN_AREA(0) + c, buf, l);
+ else
+ memcpy_fromio(buf, prv->regs + NFC_MAIN_AREA(0) + c, l);
+
+ /* Handle crossing main/spare boundary */
+ if (l != len) {
+ buf += l;
+ len -= l;
+ mpc5121_nfc_buf_copy(mtd, buf, len, wr);
+ }
+}
+
+/* Read data from NFC buffers */
+static void mpc5121_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ mpc5121_nfc_buf_copy(mtd, buf, len, 0);
+}
+
+/* Write data to NFC buffers */
+static void mpc5121_nfc_write_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ mpc5121_nfc_buf_copy(mtd, (u_char *)buf, len, 1);
+}
+
+/* Read byte from NFC buffers */
+static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd)
+{
+ u8 tmp;
+
+ mpc5121_nfc_read_buf(mtd, &tmp, sizeof(tmp));
+
+ return tmp;
+}
+
+/* Read word from NFC buffers */
+static u16 mpc5121_nfc_read_word(struct mtd_info *mtd)
+{
+ u16 tmp;
+
+ mpc5121_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
+
+ return tmp;
+}
+
+/*
+ * Read NFC configuration from Reset Config Word
+ *
+ * NFC is configured during reset in basis of information stored
+ * in Reset Config Word. There is no other way to set NAND block
+ * size, spare size and bus width.
+ */
+static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+ struct mpc512x_reset_module *rm;
+ struct device_node *rmnode;
+ uint rcw_pagesize = 0;
+ uint rcw_sparesize = 0;
+ uint rcw_width;
+ uint rcwh;
+ uint romloc, ps;
+ int ret = 0;
+
+ rmnode = of_find_compatible_node(NULL, NULL, "fsl,mpc5121-reset");
+ if (!rmnode) {
+ dev_err(prv->dev, "Missing 'fsl,mpc5121-reset' "
+ "node in device tree!\n");
+ return -ENODEV;
+ }
+
+ rm = of_iomap(rmnode, 0);
+ if (!rm) {
+ dev_err(prv->dev, "Error mapping reset module node!\n");
+ ret = -EBUSY;
+ goto out;
+ }
+
+ rcwh = in_be32(&rm->rcwhr);
+
+ /* Bit 6: NFC bus width */
+ rcw_width = ((rcwh >> 6) & 0x1) ? 2 : 1;
+
+ /* Bit 7: NFC Page/Spare size */
+ ps = (rcwh >> 7) & 0x1;
+
+ /* Bits [22:21]: ROM Location */
+ romloc = (rcwh >> 21) & 0x3;
+
+ /* Decode RCW bits */
+ switch ((ps << 2) | romloc) {
+ case 0x00:
+ case 0x01:
+ rcw_pagesize = 512;
+ rcw_sparesize = 16;
+ break;
+ case 0x02:
+ case 0x03:
+ rcw_pagesize = 4096;
+ rcw_sparesize = 128;
+ break;
+ case 0x04:
+ case 0x05:
+ rcw_pagesize = 2048;
+ rcw_sparesize = 64;
+ break;
+ case 0x06:
+ case 0x07:
+ rcw_pagesize = 4096;
+ rcw_sparesize = 218;
+ break;
+ }
+
+ mtd->writesize = rcw_pagesize;
+ mtd->oobsize = rcw_sparesize;
+ if (rcw_width == 2)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ dev_notice(prv->dev, "Configured for "
+ "%u-bit NAND, page size %u "
+ "with %u spare.\n",
+ rcw_width * 8, rcw_pagesize,
+ rcw_sparesize);
+ iounmap(rm);
+out:
+ of_node_put(rmnode);
+ return ret;
+}
+
+/* Free driver resources */
+static void mpc5121_nfc_free(struct device *dev, struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mpc5121_nfc_prv *prv = chip->priv;
+
+ if (prv->clk)
+ clk_disable_unprepare(prv->clk);
+
+ if (prv->csreg)
+ iounmap(prv->csreg);
+}
+
+static int mpc5121_nfc_probe(struct platform_device *op)
+{
+ struct device_node *rootnode, *dn = op->dev.of_node;
+ struct clk *clk;
+ struct device *dev = &op->dev;
+ struct mpc5121_nfc_prv *prv;
+ struct resource res;
+ struct mtd_info *mtd;
+ struct nand_chip *chip;
+ unsigned long regs_paddr, regs_size;
+ const __be32 *chips_no;
+ int resettime = 0;
+ int retval = 0;
+ int rev, len;
+ struct mtd_part_parser_data ppdata;
+
+ /*
+ * Check SoC revision. This driver supports only NFC
+ * in MPC5121 revision 2 and MPC5123 revision 3.
+ */
+ rev = (mfspr(SPRN_SVR) >> 4) & 0xF;
+ if ((rev != 2) && (rev != 3)) {
+ dev_err(dev, "SoC revision %u is not supported!\n", rev);
+ return -ENXIO;
+ }
+
+ prv = devm_kzalloc(dev, sizeof(*prv), GFP_KERNEL);
+ if (!prv)
+ return -ENOMEM;
+
+ mtd = &prv->mtd;
+ chip = &prv->chip;
+
+ mtd->priv = chip;
+ mtd->dev.parent = dev;
+ chip->priv = prv;
+ prv->dev = dev;
+
+ /* Read NFC configuration from Reset Config Word */
+ retval = mpc5121_nfc_read_hw_config(mtd);
+ if (retval) {
+ dev_err(dev, "Unable to read NFC config!\n");
+ return retval;
+ }
+
+ prv->irq = irq_of_parse_and_map(dn, 0);
+ if (prv->irq == NO_IRQ) {
+ dev_err(dev, "Error mapping IRQ!\n");
+ return -EINVAL;
+ }
+
+ retval = of_address_to_resource(dn, 0, &res);
+ if (retval) {
+ dev_err(dev, "Error parsing memory region!\n");
+ return retval;
+ }
+
+ chips_no = of_get_property(dn, "chips", &len);
+ if (!chips_no || len != sizeof(*chips_no)) {
+ dev_err(dev, "Invalid/missing 'chips' property!\n");
+ return -EINVAL;
+ }
+
+ regs_paddr = res.start;
+ regs_size = resource_size(&res);
+
+ if (!devm_request_mem_region(dev, regs_paddr, regs_size, DRV_NAME)) {
+ dev_err(dev, "Error requesting memory region!\n");
+ return -EBUSY;
+ }
+
+ prv->regs = devm_ioremap(dev, regs_paddr, regs_size);
+ if (!prv->regs) {
+ dev_err(dev, "Error mapping memory region!\n");
+ return -ENOMEM;
+ }
+
+ mtd->name = "MPC5121 NAND";
+ ppdata.of_node = dn;
+ chip->dev_ready = mpc5121_nfc_dev_ready;
+ chip->cmdfunc = mpc5121_nfc_command;
+ chip->read_byte = mpc5121_nfc_read_byte;
+ chip->read_word = mpc5121_nfc_read_word;
+ chip->read_buf = mpc5121_nfc_read_buf;
+ chip->write_buf = mpc5121_nfc_write_buf;
+ chip->select_chip = mpc5121_nfc_select_chip;
+ chip->bbt_options = NAND_BBT_USE_FLASH;
+ chip->ecc.mode = NAND_ECC_SOFT;
+
+ /* Support external chip-select logic on ADS5121 board */
+ rootnode = of_find_node_by_path("/");
+ if (of_device_is_compatible(rootnode, "fsl,mpc5121ads")) {
+ retval = ads5121_chipselect_init(mtd);
+ if (retval) {
+ dev_err(dev, "Chipselect init error!\n");
+ of_node_put(rootnode);
+ return retval;
+ }
+
+ chip->select_chip = ads5121_select_chip;
+ }
+ of_node_put(rootnode);
+
+ /* Enable NFC clock */
+ clk = devm_clk_get(dev, "ipg");
+ if (IS_ERR(clk)) {
+ dev_err(dev, "Unable to acquire NFC clock!\n");
+ retval = PTR_ERR(clk);
+ goto error;
+ }
+ retval = clk_prepare_enable(clk);
+ if (retval) {
+ dev_err(dev, "Unable to enable NFC clock!\n");
+ goto error;
+ }
+ prv->clk = clk;
+
+ /* Reset NAND Flash controller */
+ nfc_set(mtd, NFC_CONFIG1, NFC_RESET);
+ while (nfc_read(mtd, NFC_CONFIG1) & NFC_RESET) {
+ if (resettime++ >= NFC_RESET_TIMEOUT) {
+ dev_err(dev, "Timeout while resetting NFC!\n");
+ retval = -EINVAL;
+ goto error;
+ }
+
+ udelay(1);
+ }
+
+ /* Enable write to NFC memory */
+ nfc_write(mtd, NFC_CONFIG, NFC_BLS_UNLOCKED);
+
+ /* Enable write to all NAND pages */
+ nfc_write(mtd, NFC_UNLOCKSTART_BLK0, 0x0000);
+ nfc_write(mtd, NFC_UNLOCKEND_BLK0, 0xFFFF);
+ nfc_write(mtd, NFC_WRPROT, NFC_WPC_UNLOCK);
+
+ /*
+ * Setup NFC:
+ * - Big Endian transfers,
+ * - Interrupt after full page read/write.
+ */
+ nfc_write(mtd, NFC_CONFIG1, NFC_BIG_ENDIAN | NFC_INT_MASK |
+ NFC_FULL_PAGE_INT);
+
+ /* Set spare area size */
+ nfc_write(mtd, NFC_SPAS, mtd->oobsize >> 1);
+
+ init_waitqueue_head(&prv->irq_waitq);
+ retval = devm_request_irq(dev, prv->irq, &mpc5121_nfc_irq, 0, DRV_NAME,
+ mtd);
+ if (retval) {
+ dev_err(dev, "Error requesting IRQ!\n");
+ goto error;
+ }
+
+ /* Detect NAND chips */
+ if (nand_scan(mtd, be32_to_cpup(chips_no))) {
+ dev_err(dev, "NAND Flash not found !\n");
+ retval = -ENXIO;
+ goto error;
+ }
+
+ /* Set erase block size */
+ switch (mtd->erasesize / mtd->writesize) {
+ case 32:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_32);
+ break;
+
+ case 64:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_64);
+ break;
+
+ case 128:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_128);
+ break;
+
+ case 256:
+ nfc_set(mtd, NFC_CONFIG1, NFC_PPB_256);
+ break;
+
+ default:
+ dev_err(dev, "Unsupported NAND flash!\n");
+ retval = -ENXIO;
+ goto error;
+ }
+
+ dev_set_drvdata(dev, mtd);
+
+ /* Register device in MTD */
+ retval = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+ if (retval) {
+ dev_err(dev, "Error adding MTD device!\n");
+ goto error;
+ }
+
+ return 0;
+error:
+ mpc5121_nfc_free(dev, mtd);
+ return retval;
+}
+
+static int mpc5121_nfc_remove(struct platform_device *op)
+{
+ struct device *dev = &op->dev;
+ struct mtd_info *mtd = dev_get_drvdata(dev);
+
+ nand_release(mtd);
+ mpc5121_nfc_free(dev, mtd);
+
+ return 0;
+}
+
+static const struct of_device_id mpc5121_nfc_match[] = {
+ { .compatible = "fsl,mpc5121-nfc", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, mpc5121_nfc_match);
+
+static struct platform_driver mpc5121_nfc_driver = {
+ .probe = mpc5121_nfc_probe,
+ .remove = mpc5121_nfc_remove,
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = mpc5121_nfc_match,
+ },
+};
+
+module_platform_driver(mpc5121_nfc_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MPC5121 NAND MTD driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
new file mode 100644
index 0000000..136e73a
--- /dev/null
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -0,0 +1,1727 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/interrupt.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/completion.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
+
+#include <asm/mach/flash.h>
+#include <linux/platform_data/mtd-mxc_nand.h>
+
+#define DRIVER_NAME "mxc_nand"
+
+/* Addresses for NFC registers */
+#define NFC_V1_V2_BUF_SIZE (host->regs + 0x00)
+#define NFC_V1_V2_BUF_ADDR (host->regs + 0x04)
+#define NFC_V1_V2_FLASH_ADDR (host->regs + 0x06)
+#define NFC_V1_V2_FLASH_CMD (host->regs + 0x08)
+#define NFC_V1_V2_CONFIG (host->regs + 0x0a)
+#define NFC_V1_V2_ECC_STATUS_RESULT (host->regs + 0x0c)
+#define NFC_V1_V2_RSLTMAIN_AREA (host->regs + 0x0e)
+#define NFC_V1_V2_RSLTSPARE_AREA (host->regs + 0x10)
+#define NFC_V1_V2_WRPROT (host->regs + 0x12)
+#define NFC_V1_UNLOCKSTART_BLKADDR (host->regs + 0x14)
+#define NFC_V1_UNLOCKEND_BLKADDR (host->regs + 0x16)
+#define NFC_V21_UNLOCKSTART_BLKADDR0 (host->regs + 0x20)
+#define NFC_V21_UNLOCKSTART_BLKADDR1 (host->regs + 0x24)
+#define NFC_V21_UNLOCKSTART_BLKADDR2 (host->regs + 0x28)
+#define NFC_V21_UNLOCKSTART_BLKADDR3 (host->regs + 0x2c)
+#define NFC_V21_UNLOCKEND_BLKADDR0 (host->regs + 0x22)
+#define NFC_V21_UNLOCKEND_BLKADDR1 (host->regs + 0x26)
+#define NFC_V21_UNLOCKEND_BLKADDR2 (host->regs + 0x2a)
+#define NFC_V21_UNLOCKEND_BLKADDR3 (host->regs + 0x2e)
+#define NFC_V1_V2_NF_WRPRST (host->regs + 0x18)
+#define NFC_V1_V2_CONFIG1 (host->regs + 0x1a)
+#define NFC_V1_V2_CONFIG2 (host->regs + 0x1c)
+
+#define NFC_V2_CONFIG1_ECC_MODE_4 (1 << 0)
+#define NFC_V1_V2_CONFIG1_SP_EN (1 << 2)
+#define NFC_V1_V2_CONFIG1_ECC_EN (1 << 3)
+#define NFC_V1_V2_CONFIG1_INT_MSK (1 << 4)
+#define NFC_V1_V2_CONFIG1_BIG (1 << 5)
+#define NFC_V1_V2_CONFIG1_RST (1 << 6)
+#define NFC_V1_V2_CONFIG1_CE (1 << 7)
+#define NFC_V2_CONFIG1_ONE_CYCLE (1 << 8)
+#define NFC_V2_CONFIG1_PPB(x) (((x) & 0x3) << 9)
+#define NFC_V2_CONFIG1_FP_INT (1 << 11)
+
+#define NFC_V1_V2_CONFIG2_INT (1 << 15)
+
+/*
+ * Operation modes for the NFC. Valid for v1, v2 and v3
+ * type controllers.
+ */
+#define NFC_CMD (1 << 0)
+#define NFC_ADDR (1 << 1)
+#define NFC_INPUT (1 << 2)
+#define NFC_OUTPUT (1 << 3)
+#define NFC_ID (1 << 4)
+#define NFC_STATUS (1 << 5)
+
+#define NFC_V3_FLASH_CMD (host->regs_axi + 0x00)
+#define NFC_V3_FLASH_ADDR0 (host->regs_axi + 0x04)
+
+#define NFC_V3_CONFIG1 (host->regs_axi + 0x34)
+#define NFC_V3_CONFIG1_SP_EN (1 << 0)
+#define NFC_V3_CONFIG1_RBA(x) (((x) & 0x7 ) << 4)
+
+#define NFC_V3_ECC_STATUS_RESULT (host->regs_axi + 0x38)
+
+#define NFC_V3_LAUNCH (host->regs_axi + 0x40)
+
+#define NFC_V3_WRPROT (host->regs_ip + 0x0)
+#define NFC_V3_WRPROT_LOCK_TIGHT (1 << 0)
+#define NFC_V3_WRPROT_LOCK (1 << 1)
+#define NFC_V3_WRPROT_UNLOCK (1 << 2)
+#define NFC_V3_WRPROT_BLS_UNLOCK (2 << 6)
+
+#define NFC_V3_WRPROT_UNLOCK_BLK_ADD0 (host->regs_ip + 0x04)
+
+#define NFC_V3_CONFIG2 (host->regs_ip + 0x24)
+#define NFC_V3_CONFIG2_PS_512 (0 << 0)
+#define NFC_V3_CONFIG2_PS_2048 (1 << 0)
+#define NFC_V3_CONFIG2_PS_4096 (2 << 0)
+#define NFC_V3_CONFIG2_ONE_CYCLE (1 << 2)
+#define NFC_V3_CONFIG2_ECC_EN (1 << 3)
+#define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE0 (1 << 5)
+#define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6)
+#define NFC_V3_CONFIG2_PPB(x, shift) (((x) & 0x3) << shift)
+#define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x) (((x) & 0x3) << 12)
+#define NFC_V3_CONFIG2_INT_MSK (1 << 15)
+#define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24)
+#define NFC_V3_CONFIG2_SPAS(x) (((x) & 0xff) << 16)
+
+#define NFC_V3_CONFIG3 (host->regs_ip + 0x28)
+#define NFC_V3_CONFIG3_ADD_OP(x) (((x) & 0x3) << 0)
+#define NFC_V3_CONFIG3_FW8 (1 << 3)
+#define NFC_V3_CONFIG3_SBB(x) (((x) & 0x7) << 8)
+#define NFC_V3_CONFIG3_NUM_OF_DEVICES(x) (((x) & 0x7) << 12)
+#define NFC_V3_CONFIG3_RBB_MODE (1 << 15)
+#define NFC_V3_CONFIG3_NO_SDMA (1 << 20)
+
+#define NFC_V3_IPC (host->regs_ip + 0x2C)
+#define NFC_V3_IPC_CREQ (1 << 0)
+#define NFC_V3_IPC_INT (1 << 31)
+
+#define NFC_V3_DELAY_LINE (host->regs_ip + 0x34)
+
+struct mxc_nand_host;
+
+struct mxc_nand_devtype_data {
+ void (*preset)(struct mtd_info *);
+ void (*send_cmd)(struct mxc_nand_host *, uint16_t, int);
+ void (*send_addr)(struct mxc_nand_host *, uint16_t, int);
+ void (*send_page)(struct mtd_info *, unsigned int);
+ void (*send_read_id)(struct mxc_nand_host *);
+ uint16_t (*get_dev_status)(struct mxc_nand_host *);
+ int (*check_int)(struct mxc_nand_host *);
+ void (*irq_control)(struct mxc_nand_host *, int);
+ u32 (*get_ecc_status)(struct mxc_nand_host *);
+ struct nand_ecclayout *ecclayout_512, *ecclayout_2k, *ecclayout_4k;
+ void (*select_chip)(struct mtd_info *mtd, int chip);
+ int (*correct_data)(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc);
+
+ /*
+ * On i.MX21 the CONFIG2:INT bit cannot be read if interrupts are masked
+ * (CONFIG1:INT_MSK is set). To handle this the driver uses
+ * enable_irq/disable_irq_nosync instead of CONFIG1:INT_MSK
+ */
+ int irqpending_quirk;
+ int needs_ip;
+
+ size_t regs_offset;
+ size_t spare0_offset;
+ size_t axi_offset;
+
+ int spare_len;
+ int eccbytes;
+ int eccsize;
+ int ppb_shift;
+};
+
+struct mxc_nand_host {
+ struct mtd_info mtd;
+ struct nand_chip nand;
+ struct device *dev;
+
+ void __iomem *spare0;
+ void __iomem *main_area0;
+
+ void __iomem *base;
+ void __iomem *regs;
+ void __iomem *regs_axi;
+ void __iomem *regs_ip;
+ int status_request;
+ struct clk *clk;
+ int clk_act;
+ int irq;
+ int eccsize;
+ int used_oobsize;
+ int active_cs;
+
+ struct completion op_completion;
+
+ uint8_t *data_buf;
+ unsigned int buf_start;
+
+ const struct mxc_nand_devtype_data *devtype_data;
+ struct mxc_nand_platform_data pdata;
+};
+
+/* OOB placement block for use with hardware ecc generation */
+static struct nand_ecclayout nandv1_hw_eccoob_smallpage = {
+ .eccbytes = 5,
+ .eccpos = {6, 7, 8, 9, 10},
+ .oobfree = {{0, 5}, {12, 4}, }
+};
+
+static struct nand_ecclayout nandv1_hw_eccoob_largepage = {
+ .eccbytes = 20,
+ .eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
+ 38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
+ .oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
+};
+
+/* OOB description for 512 byte pages with 16 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_smallpage = {
+ .eccbytes = 1 * 9,
+ .eccpos = {
+ 7, 8, 9, 10, 11, 12, 13, 14, 15
+ },
+ .oobfree = {
+ {.offset = 0, .length = 5}
+ }
+};
+
+/* OOB description for 2048 byte pages with 64 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_largepage = {
+ .eccbytes = 4 * 9,
+ .eccpos = {
+ 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 55, 56, 57, 58, 59, 60, 61, 62, 63
+ },
+ .oobfree = {
+ {.offset = 2, .length = 4},
+ {.offset = 16, .length = 7},
+ {.offset = 32, .length = 7},
+ {.offset = 48, .length = 7}
+ }
+};
+
+/* OOB description for 4096 byte pages with 128 byte OOB */
+static struct nand_ecclayout nandv2_hw_eccoob_4k = {
+ .eccbytes = 8 * 9,
+ .eccpos = {
+ 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 55, 56, 57, 58, 59, 60, 61, 62, 63,
+ 71, 72, 73, 74, 75, 76, 77, 78, 79,
+ 87, 88, 89, 90, 91, 92, 93, 94, 95,
+ 103, 104, 105, 106, 107, 108, 109, 110, 111,
+ 119, 120, 121, 122, 123, 124, 125, 126, 127,
+ },
+ .oobfree = {
+ {.offset = 2, .length = 4},
+ {.offset = 16, .length = 7},
+ {.offset = 32, .length = 7},
+ {.offset = 48, .length = 7},
+ {.offset = 64, .length = 7},
+ {.offset = 80, .length = 7},
+ {.offset = 96, .length = 7},
+ {.offset = 112, .length = 7},
+ }
+};
+
+static const char * const part_probes[] = {
+ "cmdlinepart", "RedBoot", "ofpart", NULL };
+
+static void memcpy32_fromio(void *trg, const void __iomem *src, size_t size)
+{
+ int i;
+ u32 *t = trg;
+ const __iomem u32 *s = src;
+
+ for (i = 0; i < (size >> 2); i++)
+ *t++ = __raw_readl(s++);
+}
+
+static void memcpy16_fromio(void *trg, const void __iomem *src, size_t size)
+{
+ int i;
+ u16 *t = trg;
+ const __iomem u16 *s = src;
+
+ /* We assume that src (IO) is always 32bit aligned */
+ if (PTR_ALIGN(trg, 4) == trg && IS_ALIGNED(size, 4)) {
+ memcpy32_fromio(trg, src, size);
+ return;
+ }
+
+ for (i = 0; i < (size >> 1); i++)
+ *t++ = __raw_readw(s++);
+}
+
+static inline void memcpy32_toio(void __iomem *trg, const void *src, int size)
+{
+ /* __iowrite32_copy use 32bit size values so divide by 4 */
+ __iowrite32_copy(trg, src, size / 4);
+}
+
+static void memcpy16_toio(void __iomem *trg, const void *src, int size)
+{
+ int i;
+ __iomem u16 *t = trg;
+ const u16 *s = src;
+
+ /* We assume that trg (IO) is always 32bit aligned */
+ if (PTR_ALIGN(src, 4) == src && IS_ALIGNED(size, 4)) {
+ memcpy32_toio(trg, src, size);
+ return;
+ }
+
+ for (i = 0; i < (size >> 1); i++)
+ __raw_writew(*s++, t++);
+}
+
+static int check_int_v3(struct mxc_nand_host *host)
+{
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_IPC);
+ if (!(tmp & NFC_V3_IPC_INT))
+ return 0;
+
+ tmp &= ~NFC_V3_IPC_INT;
+ writel(tmp, NFC_V3_IPC);
+
+ return 1;
+}
+
+static int check_int_v1_v2(struct mxc_nand_host *host)
+{
+ uint32_t tmp;
+
+ tmp = readw(NFC_V1_V2_CONFIG2);
+ if (!(tmp & NFC_V1_V2_CONFIG2_INT))
+ return 0;
+
+ if (!host->devtype_data->irqpending_quirk)
+ writew(tmp & ~NFC_V1_V2_CONFIG2_INT, NFC_V1_V2_CONFIG2);
+
+ return 1;
+}
+
+static void irq_control_v1_v2(struct mxc_nand_host *host, int activate)
+{
+ uint16_t tmp;
+
+ tmp = readw(NFC_V1_V2_CONFIG1);
+
+ if (activate)
+ tmp &= ~NFC_V1_V2_CONFIG1_INT_MSK;
+ else
+ tmp |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+ writew(tmp, NFC_V1_V2_CONFIG1);
+}
+
+static void irq_control_v3(struct mxc_nand_host *host, int activate)
+{
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_CONFIG2);
+
+ if (activate)
+ tmp &= ~NFC_V3_CONFIG2_INT_MSK;
+ else
+ tmp |= NFC_V3_CONFIG2_INT_MSK;
+
+ writel(tmp, NFC_V3_CONFIG2);
+}
+
+static void irq_control(struct mxc_nand_host *host, int activate)
+{
+ if (host->devtype_data->irqpending_quirk) {
+ if (activate)
+ enable_irq(host->irq);
+ else
+ disable_irq_nosync(host->irq);
+ } else {
+ host->devtype_data->irq_control(host, activate);
+ }
+}
+
+static u32 get_ecc_status_v1(struct mxc_nand_host *host)
+{
+ return readw(NFC_V1_V2_ECC_STATUS_RESULT);
+}
+
+static u32 get_ecc_status_v2(struct mxc_nand_host *host)
+{
+ return readl(NFC_V1_V2_ECC_STATUS_RESULT);
+}
+
+static u32 get_ecc_status_v3(struct mxc_nand_host *host)
+{
+ return readl(NFC_V3_ECC_STATUS_RESULT);
+}
+
+static irqreturn_t mxc_nfc_irq(int irq, void *dev_id)
+{
+ struct mxc_nand_host *host = dev_id;
+
+ if (!host->devtype_data->check_int(host))
+ return IRQ_NONE;
+
+ irq_control(host, 0);
+
+ complete(&host->op_completion);
+
+ return IRQ_HANDLED;
+}
+
+/* This function polls the NANDFC to wait for the basic operation to
+ * complete by checking the INT bit of config2 register.
+ */
+static int wait_op_done(struct mxc_nand_host *host, int useirq)
+{
+ int ret = 0;
+
+ /*
+ * If operation is already complete, don't bother to setup an irq or a
+ * loop.
+ */
+ if (host->devtype_data->check_int(host))
+ return 0;
+
+ if (useirq) {
+ unsigned long timeout;
+
+ reinit_completion(&host->op_completion);
+
+ irq_control(host, 1);
+
+ timeout = wait_for_completion_timeout(&host->op_completion, HZ);
+ if (!timeout && !host->devtype_data->check_int(host)) {
+ dev_dbg(host->dev, "timeout waiting for irq\n");
+ ret = -ETIMEDOUT;
+ }
+ } else {
+ int max_retries = 8000;
+ int done;
+
+ do {
+ udelay(1);
+
+ done = host->devtype_data->check_int(host);
+ if (done)
+ break;
+
+ } while (--max_retries);
+
+ if (!done) {
+ dev_dbg(host->dev, "timeout polling for completion\n");
+ ret = -ETIMEDOUT;
+ }
+ }
+
+ WARN_ONCE(ret < 0, "timeout! useirq=%d\n", useirq);
+
+ return ret;
+}
+
+static void send_cmd_v3(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+{
+ /* fill command */
+ writel(cmd, NFC_V3_FLASH_CMD);
+
+ /* send out command */
+ writel(NFC_CMD, NFC_V3_LAUNCH);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, useirq);
+}
+
+/* This function issues the specified command to the NAND device and
+ * waits for completion. */
+static void send_cmd_v1_v2(struct mxc_nand_host *host, uint16_t cmd, int useirq)
+{
+ pr_debug("send_cmd(host, 0x%x, %d)\n", cmd, useirq);
+
+ writew(cmd, NFC_V1_V2_FLASH_CMD);
+ writew(NFC_CMD, NFC_V1_V2_CONFIG2);
+
+ if (host->devtype_data->irqpending_quirk && (cmd == NAND_CMD_RESET)) {
+ int max_retries = 100;
+ /* Reset completion is indicated by NFC_CONFIG2 */
+ /* being set to 0 */
+ while (max_retries-- > 0) {
+ if (readw(NFC_V1_V2_CONFIG2) == 0) {
+ break;
+ }
+ udelay(1);
+ }
+ if (max_retries < 0)
+ pr_debug("%s: RESET failed\n", __func__);
+ } else {
+ /* Wait for operation to complete */
+ wait_op_done(host, useirq);
+ }
+}
+
+static void send_addr_v3(struct mxc_nand_host *host, uint16_t addr, int islast)
+{
+ /* fill address */
+ writel(addr, NFC_V3_FLASH_ADDR0);
+
+ /* send out address */
+ writel(NFC_ADDR, NFC_V3_LAUNCH);
+
+ wait_op_done(host, 0);
+}
+
+/* This function sends an address (or partial address) to the
+ * NAND device. The address is used to select the source/destination for
+ * a NAND command. */
+static void send_addr_v1_v2(struct mxc_nand_host *host, uint16_t addr, int islast)
+{
+ pr_debug("send_addr(host, 0x%x %d)\n", addr, islast);
+
+ writew(addr, NFC_V1_V2_FLASH_ADDR);
+ writew(NFC_ADDR, NFC_V1_V2_CONFIG2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, islast);
+}
+
+static void send_page_v3(struct mtd_info *mtd, unsigned int ops)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint32_t tmp;
+
+ tmp = readl(NFC_V3_CONFIG1);
+ tmp &= ~(7 << 4);
+ writel(tmp, NFC_V3_CONFIG1);
+
+ /* transfer data from NFC ram to nand */
+ writel(ops, NFC_V3_LAUNCH);
+
+ wait_op_done(host, false);
+}
+
+static void send_page_v2(struct mtd_info *mtd, unsigned int ops)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ /* NANDFC buffer 0 is used for page read/write */
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+
+ writew(ops, NFC_V1_V2_CONFIG2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, true);
+}
+
+static void send_page_v1(struct mtd_info *mtd, unsigned int ops)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ int bufs, i;
+
+ if (mtd->writesize > 512)
+ bufs = 4;
+ else
+ bufs = 1;
+
+ for (i = 0; i < bufs; i++) {
+
+ /* NANDFC buffer 0 is used for page read/write */
+ writew((host->active_cs << 4) | i, NFC_V1_V2_BUF_ADDR);
+
+ writew(ops, NFC_V1_V2_CONFIG2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, true);
+ }
+}
+
+static void send_read_id_v3(struct mxc_nand_host *host)
+{
+ /* Read ID into main buffer */
+ writel(NFC_ID, NFC_V3_LAUNCH);
+
+ wait_op_done(host, true);
+
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
+}
+
+/* Request the NANDFC to perform a read of the NAND device ID. */
+static void send_read_id_v1_v2(struct mxc_nand_host *host)
+{
+ /* NANDFC buffer 0 is used for device ID output */
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+
+ writew(NFC_ID, NFC_V1_V2_CONFIG2);
+
+ /* Wait for operation to complete */
+ wait_op_done(host, true);
+
+ memcpy32_fromio(host->data_buf, host->main_area0, 16);
+}
+
+static uint16_t get_dev_status_v3(struct mxc_nand_host *host)
+{
+ writew(NFC_STATUS, NFC_V3_LAUNCH);
+ wait_op_done(host, true);
+
+ return readl(NFC_V3_CONFIG1) >> 16;
+}
+
+/* This function requests the NANDFC to perform a read of the
+ * NAND device status and returns the current status. */
+static uint16_t get_dev_status_v1_v2(struct mxc_nand_host *host)
+{
+ void __iomem *main_buf = host->main_area0;
+ uint32_t store;
+ uint16_t ret;
+
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+
+ /*
+ * The device status is stored in main_area0. To
+ * prevent corruption of the buffer save the value
+ * and restore it afterwards.
+ */
+ store = readl(main_buf);
+
+ writew(NFC_STATUS, NFC_V1_V2_CONFIG2);
+ wait_op_done(host, true);
+
+ ret = readw(main_buf);
+
+ writel(store, main_buf);
+
+ return ret;
+}
+
+/* This functions is used by upper layer to checks if device is ready */
+static int mxc_nand_dev_ready(struct mtd_info *mtd)
+{
+ /*
+ * NFC handles R/B internally. Therefore, this function
+ * always returns status as ready.
+ */
+ return 1;
+}
+
+static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ /*
+ * If HW ECC is enabled, we turn it on during init. There is
+ * no need to enable again here.
+ */
+}
+
+static int mxc_nand_correct_data_v1(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ /*
+ * 1-Bit errors are automatically corrected in HW. No need for
+ * additional correction. 2-Bit errors cannot be corrected by
+ * HW ECC, so we need to return failure
+ */
+ uint16_t ecc_status = get_ecc_status_v1(host);
+
+ if (((ecc_status & 0x3) == 2) || ((ecc_status >> 2) == 2)) {
+ pr_debug("MXC_NAND: HWECC uncorrectable 2-bit ECC error\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static int mxc_nand_correct_data_v2_v3(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ u32 ecc_stat, err;
+ int no_subpages = 1;
+ int ret = 0;
+ u8 ecc_bit_mask, err_limit;
+
+ ecc_bit_mask = (host->eccsize == 4) ? 0x7 : 0xf;
+ err_limit = (host->eccsize == 4) ? 0x4 : 0x8;
+
+ no_subpages = mtd->writesize >> 9;
+
+ ecc_stat = host->devtype_data->get_ecc_status(host);
+
+ do {
+ err = ecc_stat & ecc_bit_mask;
+ if (err > err_limit) {
+ printk(KERN_WARNING "UnCorrectable RS-ECC Error\n");
+ return -1;
+ } else {
+ ret += err;
+ }
+ ecc_stat >>= 4;
+ } while (--no_subpages);
+
+ pr_debug("%d Symbol Correctable RS-ECC Error\n", ret);
+
+ return ret;
+}
+
+static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ return 0;
+}
+
+static u_char mxc_nand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint8_t ret;
+
+ /* Check for status request */
+ if (host->status_request)
+ return host->devtype_data->get_dev_status(host) & 0xFF;
+
+ if (nand_chip->options & NAND_BUSWIDTH_16) {
+ /* only take the lower byte of each word */
+ ret = *(uint16_t *)(host->data_buf + host->buf_start);
+
+ host->buf_start += 2;
+ } else {
+ ret = *(uint8_t *)(host->data_buf + host->buf_start);
+ host->buf_start++;
+ }
+
+ pr_debug("%s: ret=0x%hhx (start=%u)\n", __func__, ret, host->buf_start);
+ return ret;
+}
+
+static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t ret;
+
+ ret = *(uint16_t *)(host->data_buf + host->buf_start);
+ host->buf_start += 2;
+
+ return ret;
+}
+
+/* Write data of length len to buffer buf. The data to be
+ * written on NAND Flash is first copied to RAMbuffer. After the Data Input
+ * Operation by the NFC, the data is written to NAND Flash */
+static void mxc_nand_write_buf(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ u16 col = host->buf_start;
+ int n = mtd->oobsize + mtd->writesize - col;
+
+ n = min(n, len);
+
+ memcpy(host->data_buf + col, buf, n);
+
+ host->buf_start += n;
+}
+
+/* Read the data buffer from the NAND Flash. To read the data from NAND
+ * Flash first the data output cycle is initiated by the NFC, which copies
+ * the data to RAMbuffer. This data of length len is then copied to buffer buf.
+ */
+static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ u16 col = host->buf_start;
+ int n = mtd->oobsize + mtd->writesize - col;
+
+ n = min(n, len);
+
+ memcpy(buf, host->data_buf + col, n);
+
+ host->buf_start += n;
+}
+
+/* This function is used by upper layer for select and
+ * deselect of the NAND chip */
+static void mxc_nand_select_chip_v1_v3(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ if (chip == -1) {
+ /* Disable the NFC clock */
+ if (host->clk_act) {
+ clk_disable_unprepare(host->clk);
+ host->clk_act = 0;
+ }
+ return;
+ }
+
+ if (!host->clk_act) {
+ /* Enable the NFC clock */
+ clk_prepare_enable(host->clk);
+ host->clk_act = 1;
+ }
+}
+
+static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ if (chip == -1) {
+ /* Disable the NFC clock */
+ if (host->clk_act) {
+ clk_disable_unprepare(host->clk);
+ host->clk_act = 0;
+ }
+ return;
+ }
+
+ if (!host->clk_act) {
+ /* Enable the NFC clock */
+ clk_prepare_enable(host->clk);
+ host->clk_act = 1;
+ }
+
+ host->active_cs = chip;
+ writew(host->active_cs << 4, NFC_V1_V2_BUF_ADDR);
+}
+
+/*
+ * The controller splits a page into data chunks of 512 bytes + partial oob.
+ * There are writesize / 512 such chunks, the size of the partial oob parts is
+ * oobsize / #chunks rounded down to a multiple of 2. The last oob chunk then
+ * contains additionally the byte lost by rounding (if any).
+ * This function handles the needed shuffling between host->data_buf (which
+ * holds a page in natural order, i.e. writesize bytes data + oobsize bytes
+ * spare) and the NFC buffer.
+ */
+static void copy_spare(struct mtd_info *mtd, bool bfrom)
+{
+ struct nand_chip *this = mtd->priv;
+ struct mxc_nand_host *host = this->priv;
+ u16 i, oob_chunk_size;
+ u16 num_chunks = mtd->writesize / 512;
+
+ u8 *d = host->data_buf + mtd->writesize;
+ u8 __iomem *s = host->spare0;
+ u16 sparebuf_size = host->devtype_data->spare_len;
+
+ /* size of oob chunk for all but possibly the last one */
+ oob_chunk_size = (host->used_oobsize / num_chunks) & ~1;
+
+ if (bfrom) {
+ for (i = 0; i < num_chunks - 1; i++)
+ memcpy16_fromio(d + i * oob_chunk_size,
+ s + i * sparebuf_size,
+ oob_chunk_size);
+
+ /* the last chunk */
+ memcpy16_fromio(d + i * oob_chunk_size,
+ s + i * sparebuf_size,
+ host->used_oobsize - i * oob_chunk_size);
+ } else {
+ for (i = 0; i < num_chunks - 1; i++)
+ memcpy16_toio(&s[i * sparebuf_size],
+ &d[i * oob_chunk_size],
+ oob_chunk_size);
+
+ /* the last chunk */
+ memcpy16_toio(&s[i * sparebuf_size],
+ &d[i * oob_chunk_size],
+ host->used_oobsize - i * oob_chunk_size);
+ }
+}
+
+/*
+ * MXC NANDFC can only perform full page+spare or spare-only read/write. When
+ * the upper layers perform a read/write buf operation, the saved column address
+ * is used to index into the full page. So usually this function is called with
+ * column == 0 (unless no column cycle is needed indicated by column == -1)
+ */
+static void mxc_do_addr_cycle(struct mtd_info *mtd, int column, int page_addr)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ /* Write out column address, if necessary */
+ if (column != -1) {
+ host->devtype_data->send_addr(host, column & 0xff,
+ page_addr == -1);
+ if (mtd->writesize > 512)
+ /* another col addr cycle for 2k page */
+ host->devtype_data->send_addr(host,
+ (column >> 8) & 0xff,
+ false);
+ }
+
+ /* Write out page address, if necessary */
+ if (page_addr != -1) {
+ /* paddr_0 - p_addr_7 */
+ host->devtype_data->send_addr(host, (page_addr & 0xff), false);
+
+ if (mtd->writesize > 512) {
+ if (mtd->size >= 0x10000000) {
+ /* paddr_8 - paddr_15 */
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff,
+ false);
+ host->devtype_data->send_addr(host,
+ (page_addr >> 16) & 0xff,
+ true);
+ } else
+ /* paddr_8 - paddr_15 */
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff, true);
+ } else {
+ /* One more address cycle for higher density devices */
+ if (mtd->size >= 0x4000000) {
+ /* paddr_8 - paddr_15 */
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff,
+ false);
+ host->devtype_data->send_addr(host,
+ (page_addr >> 16) & 0xff,
+ true);
+ } else
+ /* paddr_8 - paddr_15 */
+ host->devtype_data->send_addr(host,
+ (page_addr >> 8) & 0xff, true);
+ }
+ }
+}
+
+/*
+ * v2 and v3 type controllers can do 4bit or 8bit ecc depending
+ * on how much oob the nand chip has. For 8bit ecc we need at least
+ * 26 bytes of oob data per 512 byte block.
+ */
+static int get_eccsize(struct mtd_info *mtd)
+{
+ int oobbytes_per_512 = 0;
+
+ oobbytes_per_512 = mtd->oobsize * 512 / mtd->writesize;
+
+ if (oobbytes_per_512 < 26)
+ return 4;
+ else
+ return 8;
+}
+
+static void ecc_8bit_layout_4k(struct nand_ecclayout *layout)
+{
+ int i, j;
+
+ layout->eccbytes = 8*18;
+ for (i = 0; i < 8; i++)
+ for (j = 0; j < 18; j++)
+ layout->eccpos[i*18 + j] = i*26 + j + 7;
+
+ layout->oobfree[0].offset = 2;
+ layout->oobfree[0].length = 4;
+ for (i = 1; i < 8; i++) {
+ layout->oobfree[i].offset = i*26;
+ layout->oobfree[i].length = 7;
+ }
+}
+
+static void preset_v1(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t config1 = 0;
+
+ if (nand_chip->ecc.mode == NAND_ECC_HW && mtd->writesize)
+ config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
+
+ if (!host->devtype_data->irqpending_quirk)
+ config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+ host->eccsize = 1;
+
+ writew(config1, NFC_V1_V2_CONFIG1);
+ /* preset operation */
+
+ /* Unlock the internal RAM Buffer */
+ writew(0x2, NFC_V1_V2_CONFIG);
+
+ /* Blocks to be unlocked */
+ writew(0x0, NFC_V1_UNLOCKSTART_BLKADDR);
+ writew(0xffff, NFC_V1_UNLOCKEND_BLKADDR);
+
+ /* Unlock Block Command for given address range */
+ writew(0x4, NFC_V1_V2_WRPROT);
+}
+
+static void preset_v2(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+ uint16_t config1 = 0;
+
+ config1 |= NFC_V2_CONFIG1_FP_INT;
+
+ if (!host->devtype_data->irqpending_quirk)
+ config1 |= NFC_V1_V2_CONFIG1_INT_MSK;
+
+ if (mtd->writesize) {
+ uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
+
+ if (nand_chip->ecc.mode == NAND_ECC_HW)
+ config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
+
+ host->eccsize = get_eccsize(mtd);
+ if (host->eccsize == 4)
+ config1 |= NFC_V2_CONFIG1_ECC_MODE_4;
+
+ config1 |= NFC_V2_CONFIG1_PPB(ffs(pages_per_block) - 6);
+ } else {
+ host->eccsize = 1;
+ }
+
+ writew(config1, NFC_V1_V2_CONFIG1);
+ /* preset operation */
+
+ /* Unlock the internal RAM Buffer */
+ writew(0x2, NFC_V1_V2_CONFIG);
+
+ /* Blocks to be unlocked */
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR0);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR1);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR2);
+ writew(0x0, NFC_V21_UNLOCKSTART_BLKADDR3);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR0);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR1);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR2);
+ writew(0xffff, NFC_V21_UNLOCKEND_BLKADDR3);
+
+ /* Unlock Block Command for given address range */
+ writew(0x4, NFC_V1_V2_WRPROT);
+}
+
+static void preset_v3(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mxc_nand_host *host = chip->priv;
+ uint32_t config2, config3;
+ int i, addr_phases;
+
+ writel(NFC_V3_CONFIG1_RBA(0), NFC_V3_CONFIG1);
+ writel(NFC_V3_IPC_CREQ, NFC_V3_IPC);
+
+ /* Unlock the internal RAM Buffer */
+ writel(NFC_V3_WRPROT_BLS_UNLOCK | NFC_V3_WRPROT_UNLOCK,
+ NFC_V3_WRPROT);
+
+ /* Blocks to be unlocked */
+ for (i = 0; i < NAND_MAX_CHIPS; i++)
+ writel(0x0 | (0xffff << 16),
+ NFC_V3_WRPROT_UNLOCK_BLK_ADD0 + (i << 2));
+
+ writel(0, NFC_V3_IPC);
+
+ config2 = NFC_V3_CONFIG2_ONE_CYCLE |
+ NFC_V3_CONFIG2_2CMD_PHASES |
+ NFC_V3_CONFIG2_SPAS(mtd->oobsize >> 1) |
+ NFC_V3_CONFIG2_ST_CMD(0x70) |
+ NFC_V3_CONFIG2_INT_MSK |
+ NFC_V3_CONFIG2_NUM_ADDR_PHASE0;
+
+ addr_phases = fls(chip->pagemask) >> 3;
+
+ if (mtd->writesize == 2048) {
+ config2 |= NFC_V3_CONFIG2_PS_2048;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+ } else if (mtd->writesize == 4096) {
+ config2 |= NFC_V3_CONFIG2_PS_4096;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases);
+ } else {
+ config2 |= NFC_V3_CONFIG2_PS_512;
+ config2 |= NFC_V3_CONFIG2_NUM_ADDR_PHASE1(addr_phases - 1);
+ }
+
+ if (mtd->writesize) {
+ if (chip->ecc.mode == NAND_ECC_HW)
+ config2 |= NFC_V3_CONFIG2_ECC_EN;
+
+ config2 |= NFC_V3_CONFIG2_PPB(
+ ffs(mtd->erasesize / mtd->writesize) - 6,
+ host->devtype_data->ppb_shift);
+ host->eccsize = get_eccsize(mtd);
+ if (host->eccsize == 8)
+ config2 |= NFC_V3_CONFIG2_ECC_MODE_8;
+ }
+
+ writel(config2, NFC_V3_CONFIG2);
+
+ config3 = NFC_V3_CONFIG3_NUM_OF_DEVICES(0) |
+ NFC_V3_CONFIG3_NO_SDMA |
+ NFC_V3_CONFIG3_RBB_MODE |
+ NFC_V3_CONFIG3_SBB(6) | /* Reset default */
+ NFC_V3_CONFIG3_ADD_OP(0);
+
+ if (!(chip->options & NAND_BUSWIDTH_16))
+ config3 |= NFC_V3_CONFIG3_FW8;
+
+ writel(config3, NFC_V3_CONFIG3);
+
+ writel(0, NFC_V3_DELAY_LINE);
+}
+
+/* Used by the upper layer to write command to NAND Flash for
+ * different operations to be carried out on NAND Flash */
+static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
+
+ pr_debug("mxc_nand_command (cmd = 0x%x, col = 0x%x, page = 0x%x)\n",
+ command, column, page_addr);
+
+ /* Reset command state information */
+ host->status_request = false;
+
+ /* Command pre-processing step */
+ switch (command) {
+ case NAND_CMD_RESET:
+ host->devtype_data->preset(mtd);
+ host->devtype_data->send_cmd(host, command, false);
+ break;
+
+ case NAND_CMD_STATUS:
+ host->buf_start = 0;
+ host->status_request = true;
+
+ host->devtype_data->send_cmd(host, command, true);
+ WARN_ONCE(column != -1 || page_addr != -1,
+ "Unexpected column/row value (cmd=%u, col=%d, row=%d)\n",
+ command, column, page_addr);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+ break;
+
+ case NAND_CMD_READ0:
+ case NAND_CMD_READOOB:
+ if (command == NAND_CMD_READ0)
+ host->buf_start = column;
+ else
+ host->buf_start = column + mtd->writesize;
+
+ command = NAND_CMD_READ0; /* only READ0 is valid */
+
+ host->devtype_data->send_cmd(host, command, false);
+ WARN_ONCE(column < 0,
+ "Unexpected column/row value (cmd=%u, col=%d, row=%d)\n",
+ command, column, page_addr);
+ mxc_do_addr_cycle(mtd, 0, page_addr);
+
+ if (mtd->writesize > 512)
+ host->devtype_data->send_cmd(host,
+ NAND_CMD_READSTART, true);
+
+ host->devtype_data->send_page(mtd, NFC_OUTPUT);
+
+ memcpy32_fromio(host->data_buf, host->main_area0,
+ mtd->writesize);
+ copy_spare(mtd, true);
+ break;
+
+ case NAND_CMD_SEQIN:
+ if (column >= mtd->writesize)
+ /* call ourself to read a page */
+ mxc_nand_command(mtd, NAND_CMD_READ0, 0, page_addr);
+
+ host->buf_start = column;
+
+ host->devtype_data->send_cmd(host, command, false);
+ WARN_ONCE(column < -1,
+ "Unexpected column/row value (cmd=%u, col=%d, row=%d)\n",
+ command, column, page_addr);
+ mxc_do_addr_cycle(mtd, 0, page_addr);
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ memcpy32_toio(host->main_area0, host->data_buf, mtd->writesize);
+ copy_spare(mtd, false);
+ host->devtype_data->send_page(mtd, NFC_INPUT);
+ host->devtype_data->send_cmd(host, command, true);
+ WARN_ONCE(column != -1 || page_addr != -1,
+ "Unexpected column/row value (cmd=%u, col=%d, row=%d)\n",
+ command, column, page_addr);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+ break;
+
+ case NAND_CMD_READID:
+ host->devtype_data->send_cmd(host, command, true);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+ host->devtype_data->send_read_id(host);
+ host->buf_start = 0;
+ break;
+
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ host->devtype_data->send_cmd(host, command, false);
+ WARN_ONCE(column != -1,
+ "Unexpected column value (cmd=%u, col=%d)\n",
+ command, column);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+
+ break;
+ case NAND_CMD_PARAM:
+ host->devtype_data->send_cmd(host, command, false);
+ mxc_do_addr_cycle(mtd, column, page_addr);
+ host->devtype_data->send_page(mtd, NFC_OUTPUT);
+ memcpy32_fromio(host->data_buf, host->main_area0, 512);
+ host->buf_start = 0;
+ break;
+ default:
+ WARN_ONCE(1, "Unimplemented command (cmd=%u)\n",
+ command);
+ break;
+ }
+}
+
+/*
+ * The generic flash bbt decriptors overlap with our ecc
+ * hardware, so define some i.MX specific ones.
+ */
+static uint8_t bbt_pattern[] = { 'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = { '1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = 4,
+ .pattern = bbt_pattern,
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 0,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = 4,
+ .pattern = mirror_pattern,
+};
+
+/* v1 + irqpending_quirk: i.MX21 */
+static const struct mxc_nand_devtype_data imx21_nand_devtype_data = {
+ .preset = preset_v1,
+ .send_cmd = send_cmd_v1_v2,
+ .send_addr = send_addr_v1_v2,
+ .send_page = send_page_v1,
+ .send_read_id = send_read_id_v1_v2,
+ .get_dev_status = get_dev_status_v1_v2,
+ .check_int = check_int_v1_v2,
+ .irq_control = irq_control_v1_v2,
+ .get_ecc_status = get_ecc_status_v1,
+ .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv1_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v1,
+ .irqpending_quirk = 1,
+ .needs_ip = 0,
+ .regs_offset = 0xe00,
+ .spare0_offset = 0x800,
+ .spare_len = 16,
+ .eccbytes = 3,
+ .eccsize = 1,
+};
+
+/* v1 + !irqpending_quirk: i.MX27, i.MX31 */
+static const struct mxc_nand_devtype_data imx27_nand_devtype_data = {
+ .preset = preset_v1,
+ .send_cmd = send_cmd_v1_v2,
+ .send_addr = send_addr_v1_v2,
+ .send_page = send_page_v1,
+ .send_read_id = send_read_id_v1_v2,
+ .get_dev_status = get_dev_status_v1_v2,
+ .check_int = check_int_v1_v2,
+ .irq_control = irq_control_v1_v2,
+ .get_ecc_status = get_ecc_status_v1,
+ .ecclayout_512 = &nandv1_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv1_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv1_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v1,
+ .irqpending_quirk = 0,
+ .needs_ip = 0,
+ .regs_offset = 0xe00,
+ .spare0_offset = 0x800,
+ .axi_offset = 0,
+ .spare_len = 16,
+ .eccbytes = 3,
+ .eccsize = 1,
+};
+
+/* v21: i.MX25, i.MX35 */
+static const struct mxc_nand_devtype_data imx25_nand_devtype_data = {
+ .preset = preset_v2,
+ .send_cmd = send_cmd_v1_v2,
+ .send_addr = send_addr_v1_v2,
+ .send_page = send_page_v2,
+ .send_read_id = send_read_id_v1_v2,
+ .get_dev_status = get_dev_status_v1_v2,
+ .check_int = check_int_v1_v2,
+ .irq_control = irq_control_v1_v2,
+ .get_ecc_status = get_ecc_status_v2,
+ .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv2_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv2_hw_eccoob_4k,
+ .select_chip = mxc_nand_select_chip_v2,
+ .correct_data = mxc_nand_correct_data_v2_v3,
+ .irqpending_quirk = 0,
+ .needs_ip = 0,
+ .regs_offset = 0x1e00,
+ .spare0_offset = 0x1000,
+ .axi_offset = 0,
+ .spare_len = 64,
+ .eccbytes = 9,
+ .eccsize = 0,
+};
+
+/* v3.2a: i.MX51 */
+static const struct mxc_nand_devtype_data imx51_nand_devtype_data = {
+ .preset = preset_v3,
+ .send_cmd = send_cmd_v3,
+ .send_addr = send_addr_v3,
+ .send_page = send_page_v3,
+ .send_read_id = send_read_id_v3,
+ .get_dev_status = get_dev_status_v3,
+ .check_int = check_int_v3,
+ .irq_control = irq_control_v3,
+ .get_ecc_status = get_ecc_status_v3,
+ .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv2_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v2_v3,
+ .irqpending_quirk = 0,
+ .needs_ip = 1,
+ .regs_offset = 0,
+ .spare0_offset = 0x1000,
+ .axi_offset = 0x1e00,
+ .spare_len = 64,
+ .eccbytes = 0,
+ .eccsize = 0,
+ .ppb_shift = 7,
+};
+
+/* v3.2b: i.MX53 */
+static const struct mxc_nand_devtype_data imx53_nand_devtype_data = {
+ .preset = preset_v3,
+ .send_cmd = send_cmd_v3,
+ .send_addr = send_addr_v3,
+ .send_page = send_page_v3,
+ .send_read_id = send_read_id_v3,
+ .get_dev_status = get_dev_status_v3,
+ .check_int = check_int_v3,
+ .irq_control = irq_control_v3,
+ .get_ecc_status = get_ecc_status_v3,
+ .ecclayout_512 = &nandv2_hw_eccoob_smallpage,
+ .ecclayout_2k = &nandv2_hw_eccoob_largepage,
+ .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */
+ .select_chip = mxc_nand_select_chip_v1_v3,
+ .correct_data = mxc_nand_correct_data_v2_v3,
+ .irqpending_quirk = 0,
+ .needs_ip = 1,
+ .regs_offset = 0,
+ .spare0_offset = 0x1000,
+ .axi_offset = 0x1e00,
+ .spare_len = 64,
+ .eccbytes = 0,
+ .eccsize = 0,
+ .ppb_shift = 8,
+};
+
+static inline int is_imx21_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx21_nand_devtype_data;
+}
+
+static inline int is_imx27_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx27_nand_devtype_data;
+}
+
+static inline int is_imx25_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx25_nand_devtype_data;
+}
+
+static inline int is_imx51_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx51_nand_devtype_data;
+}
+
+static inline int is_imx53_nfc(struct mxc_nand_host *host)
+{
+ return host->devtype_data == &imx53_nand_devtype_data;
+}
+
+static const struct platform_device_id mxcnd_devtype[] = {
+ {
+ .name = "imx21-nand",
+ .driver_data = (kernel_ulong_t) &imx21_nand_devtype_data,
+ }, {
+ .name = "imx27-nand",
+ .driver_data = (kernel_ulong_t) &imx27_nand_devtype_data,
+ }, {
+ .name = "imx25-nand",
+ .driver_data = (kernel_ulong_t) &imx25_nand_devtype_data,
+ }, {
+ .name = "imx51-nand",
+ .driver_data = (kernel_ulong_t) &imx51_nand_devtype_data,
+ }, {
+ .name = "imx53-nand",
+ .driver_data = (kernel_ulong_t) &imx53_nand_devtype_data,
+ }, {
+ /* sentinel */
+ }
+};
+MODULE_DEVICE_TABLE(platform, mxcnd_devtype);
+
+#ifdef CONFIG_OF_MTD
+static const struct of_device_id mxcnd_dt_ids[] = {
+ {
+ .compatible = "fsl,imx21-nand",
+ .data = &imx21_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx27-nand",
+ .data = &imx27_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx25-nand",
+ .data = &imx25_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx51-nand",
+ .data = &imx51_nand_devtype_data,
+ }, {
+ .compatible = "fsl,imx53-nand",
+ .data = &imx53_nand_devtype_data,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mxcnd_dt_ids);
+
+static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+{
+ struct device_node *np = host->dev->of_node;
+ struct mxc_nand_platform_data *pdata = &host->pdata;
+ const struct of_device_id *of_id =
+ of_match_device(mxcnd_dt_ids, host->dev);
+ int buswidth;
+
+ if (!np)
+ return 1;
+
+ if (of_get_nand_ecc_mode(np) >= 0)
+ pdata->hw_ecc = 1;
+
+ pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
+
+ buswidth = of_get_nand_bus_width(np);
+ if (buswidth < 0)
+ return buswidth;
+
+ pdata->width = buswidth / 8;
+
+ host->devtype_data = of_id->data;
+
+ return 0;
+}
+#else
+static int __init mxcnd_probe_dt(struct mxc_nand_host *host)
+{
+ return 1;
+}
+#endif
+
+static int mxcnd_probe(struct platform_device *pdev)
+{
+ struct nand_chip *this;
+ struct mtd_info *mtd;
+ struct mxc_nand_host *host;
+ struct resource *res;
+ int err = 0;
+
+ /* Allocate memory for MTD device structure and private data */
+ host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host),
+ GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ /* allocate a temporary buffer for the nand_scan_ident() */
+ host->data_buf = devm_kzalloc(&pdev->dev, PAGE_SIZE, GFP_KERNEL);
+ if (!host->data_buf)
+ return -ENOMEM;
+
+ host->dev = &pdev->dev;
+ /* structures must be linked */
+ this = &host->nand;
+ mtd = &host->mtd;
+ mtd->priv = this;
+ mtd->dev.parent = &pdev->dev;
+ mtd->name = DRIVER_NAME;
+
+ /* 50 us command delay time */
+ this->chip_delay = 5;
+
+ this->priv = host;
+ this->dev_ready = mxc_nand_dev_ready;
+ this->cmdfunc = mxc_nand_command;
+ this->read_byte = mxc_nand_read_byte;
+ this->read_word = mxc_nand_read_word;
+ this->write_buf = mxc_nand_write_buf;
+ this->read_buf = mxc_nand_read_buf;
+
+ host->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(host->clk))
+ return PTR_ERR(host->clk);
+
+ err = mxcnd_probe_dt(host);
+ if (err > 0) {
+ struct mxc_nand_platform_data *pdata =
+ dev_get_platdata(&pdev->dev);
+ if (pdata) {
+ host->pdata = *pdata;
+ host->devtype_data = (struct mxc_nand_devtype_data *)
+ pdev->id_entry->driver_data;
+ } else {
+ err = -ENODEV;
+ }
+ }
+ if (err < 0)
+ return err;
+
+ if (host->devtype_data->needs_ip) {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ host->regs_ip = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->regs_ip))
+ return PTR_ERR(host->regs_ip);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ } else {
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ }
+
+ host->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(host->base))
+ return PTR_ERR(host->base);
+
+ host->main_area0 = host->base;
+
+ if (host->devtype_data->regs_offset)
+ host->regs = host->base + host->devtype_data->regs_offset;
+ host->spare0 = host->base + host->devtype_data->spare0_offset;
+ if (host->devtype_data->axi_offset)
+ host->regs_axi = host->base + host->devtype_data->axi_offset;
+
+ this->ecc.bytes = host->devtype_data->eccbytes;
+ host->eccsize = host->devtype_data->eccsize;
+
+ this->select_chip = host->devtype_data->select_chip;
+ this->ecc.size = 512;
+ this->ecc.layout = host->devtype_data->ecclayout_512;
+
+ if (host->pdata.hw_ecc) {
+ this->ecc.calculate = mxc_nand_calculate_ecc;
+ this->ecc.hwctl = mxc_nand_enable_hwecc;
+ this->ecc.correct = host->devtype_data->correct_data;
+ this->ecc.mode = NAND_ECC_HW;
+ } else {
+ this->ecc.mode = NAND_ECC_SOFT;
+ }
+
+ /* NAND bus width determines access functions used by upper layer */
+ if (host->pdata.width == 2)
+ this->options |= NAND_BUSWIDTH_16;
+
+ if (host->pdata.flash_bbt) {
+ this->bbt_td = &bbt_main_descr;
+ this->bbt_md = &bbt_mirror_descr;
+ /* update flash based bbt */
+ this->bbt_options |= NAND_BBT_USE_FLASH;
+ }
+
+ init_completion(&host->op_completion);
+
+ host->irq = platform_get_irq(pdev, 0);
+ if (host->irq < 0)
+ return host->irq;
+
+ /*
+ * Use host->devtype_data->irq_control() here instead of irq_control()
+ * because we must not disable_irq_nosync without having requested the
+ * irq.
+ */
+ host->devtype_data->irq_control(host, 0);
+
+ err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq,
+ 0, DRIVER_NAME, host);
+ if (err)
+ return err;
+
+ err = clk_prepare_enable(host->clk);
+ if (err)
+ return err;
+ host->clk_act = 1;
+
+ /*
+ * Now that we "own" the interrupt make sure the interrupt mask bit is
+ * cleared on i.MX21. Otherwise we can't read the interrupt status bit
+ * on this machine.
+ */
+ if (host->devtype_data->irqpending_quirk) {
+ disable_irq_nosync(host->irq);
+ host->devtype_data->irq_control(host, 1);
+ }
+
+ /* first scan to find the device and get the page size */
+ if (nand_scan_ident(mtd, is_imx25_nfc(host) ? 4 : 1, NULL)) {
+ err = -ENXIO;
+ goto escan;
+ }
+
+ /* allocate the right size buffer now */
+ devm_kfree(&pdev->dev, (void *)host->data_buf);
+ host->data_buf = devm_kzalloc(&pdev->dev, mtd->writesize + mtd->oobsize,
+ GFP_KERNEL);
+ if (!host->data_buf) {
+ err = -ENOMEM;
+ goto escan;
+ }
+
+ /* Call preset again, with correct writesize this time */
+ host->devtype_data->preset(mtd);
+
+ if (mtd->writesize == 2048)
+ this->ecc.layout = host->devtype_data->ecclayout_2k;
+ else if (mtd->writesize == 4096) {
+ this->ecc.layout = host->devtype_data->ecclayout_4k;
+ if (get_eccsize(mtd) == 8)
+ ecc_8bit_layout_4k(this->ecc.layout);
+ }
+
+ /*
+ * Experimentation shows that i.MX NFC can only handle up to 218 oob
+ * bytes. Limit used_oobsize to 218 so as to not confuse copy_spare()
+ * into copying invalid data to/from the spare IO buffer, as this
+ * might cause ECC data corruption when doing sub-page write to a
+ * partially written page.
+ */
+ host->used_oobsize = min(mtd->oobsize, 218U);
+
+ if (this->ecc.mode == NAND_ECC_HW) {
+ if (is_imx21_nfc(host) || is_imx27_nfc(host))
+ this->ecc.strength = 1;
+ else
+ this->ecc.strength = (host->eccsize == 4) ? 4 : 8;
+ }
+
+ /* second phase scan */
+ if (nand_scan_tail(mtd)) {
+ err = -ENXIO;
+ goto escan;
+ }
+
+ /* Register the partitions */
+ mtd_device_parse_register(mtd, part_probes,
+ &(struct mtd_part_parser_data){
+ .of_node = pdev->dev.of_node,
+ },
+ host->pdata.parts,
+ host->pdata.nr_parts);
+
+ platform_set_drvdata(pdev, host);
+
+ return 0;
+
+escan:
+ if (host->clk_act)
+ clk_disable_unprepare(host->clk);
+
+ return err;
+}
+
+static int mxcnd_remove(struct platform_device *pdev)
+{
+ struct mxc_nand_host *host = platform_get_drvdata(pdev);
+
+ nand_release(&host->mtd);
+ if (host->clk_act)
+ clk_disable_unprepare(host->clk);
+
+ return 0;
+}
+
+static struct platform_driver mxcnd_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(mxcnd_dt_ids),
+ },
+ .id_table = mxcnd_devtype,
+ .probe = mxcnd_probe,
+ .remove = mxcnd_remove,
+};
+module_platform_driver(mxcnd_driver);
+
+MODULE_AUTHOR("Freescale Semiconductor, Inc.");
+MODULE_DESCRIPTION("MXC NAND MTD driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
new file mode 100644
index 0000000..54ab488
--- /dev/null
+++ b/drivers/mtd/nand/nand_base.c
@@ -0,0 +1,4460 @@
+/*
+ * Overview:
+ * This is the generic MTD driver for NAND flash devices. It should be
+ * capable of working with almost all NAND chips currently available.
+ *
+ * Additional technical information is available on
+ * http://www.linux-mtd.infradead.org/doc/nand.html
+ *
+ * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com)
+ * 2002-2006 Thomas Gleixner (tglx@linutronix.de)
+ *
+ * Credits:
+ * David Woodhouse for adding multichip support
+ *
+ * Aleph One Ltd. and Toby Churchill Ltd. for supporting the
+ * rework for 2K page size chips
+ *
+ * TODO:
+ * Enable cached programming for 2k page size chips
+ * Check, if mtd->ecctype should be set to MTD_ECC_HW
+ * if we have HW ECC support.
+ * BBT table is not serialized, has to be fixed
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/mm.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/nand_bch.h>
+#include <linux/interrupt.h>
+#include <linux/bitops.h>
+#include <linux/leds.h>
+#include <linux/io.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of_mtd.h>
+
+/* Define default oob placement schemes for large and small page devices */
+static struct nand_ecclayout nand_oob_8 = {
+ .eccbytes = 3,
+ .eccpos = {0, 1, 2},
+ .oobfree = {
+ {.offset = 3,
+ .length = 2},
+ {.offset = 6,
+ .length = 2} }
+};
+
+static struct nand_ecclayout nand_oob_16 = {
+ .eccbytes = 6,
+ .eccpos = {0, 1, 2, 3, 6, 7},
+ .oobfree = {
+ {.offset = 8,
+ . length = 8} }
+};
+
+static struct nand_ecclayout nand_oob_64 = {
+ .eccbytes = 24,
+ .eccpos = {
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = {
+ {.offset = 2,
+ .length = 38} }
+};
+
+static struct nand_ecclayout nand_oob_128 = {
+ .eccbytes = 48,
+ .eccpos = {
+ 80, 81, 82, 83, 84, 85, 86, 87,
+ 88, 89, 90, 91, 92, 93, 94, 95,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127},
+ .oobfree = {
+ {.offset = 2,
+ .length = 78} }
+};
+
+static int nand_get_device(struct mtd_info *mtd, int new_state);
+
+static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops);
+
+/*
+ * For devices which display every fart in the system on a separate LED. Is
+ * compiled away when LED support is disabled.
+ */
+DEFINE_LED_TRIGGER(nand_led_trigger);
+
+static int check_offs_len(struct mtd_info *mtd,
+ loff_t ofs, uint64_t len)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret = 0;
+
+ /* Start address must align on block boundary */
+ if (ofs & ((1ULL << chip->phys_erase_shift) - 1)) {
+ pr_debug("%s: unaligned address\n", __func__);
+ ret = -EINVAL;
+ }
+
+ /* Length must align on block boundary */
+ if (len & ((1ULL << chip->phys_erase_shift) - 1)) {
+ pr_debug("%s: length not block aligned\n", __func__);
+ ret = -EINVAL;
+ }
+
+ return ret;
+}
+
+/**
+ * nand_release_device - [GENERIC] release chip
+ * @mtd: MTD device structure
+ *
+ * Release chip lock and wake up anyone waiting on the device.
+ */
+static void nand_release_device(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ /* Release the controller and the chip */
+ spin_lock(&chip->controller->lock);
+ chip->controller->active = NULL;
+ chip->state = FL_READY;
+ wake_up(&chip->controller->wq);
+ spin_unlock(&chip->controller->lock);
+}
+
+/**
+ * nand_read_byte - [DEFAULT] read one byte from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 8bit buswidth
+ */
+static uint8_t nand_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ return readb(chip->IO_ADDR_R);
+}
+
+/**
+ * nand_read_byte16 - [DEFAULT] read one byte endianness aware from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 16bit buswidth with endianness conversion.
+ *
+ */
+static uint8_t nand_read_byte16(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R));
+}
+
+/**
+ * nand_read_word - [DEFAULT] read one word from the chip
+ * @mtd: MTD device structure
+ *
+ * Default read function for 16bit buswidth without endianness conversion.
+ */
+static u16 nand_read_word(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ return readw(chip->IO_ADDR_R);
+}
+
+/**
+ * nand_select_chip - [DEFAULT] control CE line
+ * @mtd: MTD device structure
+ * @chipnr: chipnumber to select, -1 for deselect
+ *
+ * Default select function for 1 chip devices.
+ */
+static void nand_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ switch (chipnr) {
+ case -1:
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, 0 | NAND_CTRL_CHANGE);
+ break;
+ case 0:
+ break;
+
+ default:
+ BUG();
+ }
+}
+
+/**
+ * nand_write_byte - [DEFAULT] write single byte to chip
+ * @mtd: MTD device structure
+ * @byte: value to write
+ *
+ * Default function to write a byte to I/O[7:0]
+ */
+static void nand_write_byte(struct mtd_info *mtd, uint8_t byte)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ chip->write_buf(mtd, &byte, 1);
+}
+
+/**
+ * nand_write_byte16 - [DEFAULT] write single byte to a chip with width 16
+ * @mtd: MTD device structure
+ * @byte: value to write
+ *
+ * Default function to write a byte to I/O[7:0] on a 16-bit wide chip.
+ */
+static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte)
+{
+ struct nand_chip *chip = mtd->priv;
+ uint16_t word = byte;
+
+ /*
+ * It's not entirely clear what should happen to I/O[15:8] when writing
+ * a byte. The ONFi spec (Revision 3.1; 2012-09-19, Section 2.16) reads:
+ *
+ * When the host supports a 16-bit bus width, only data is
+ * transferred at the 16-bit width. All address and command line
+ * transfers shall use only the lower 8-bits of the data bus. During
+ * command transfers, the host may place any value on the upper
+ * 8-bits of the data bus. During address transfers, the host shall
+ * set the upper 8-bits of the data bus to 00h.
+ *
+ * One user of the write_byte callback is nand_onfi_set_features. The
+ * four parameters are specified to be written to I/O[7:0], but this is
+ * neither an address nor a command transfer. Let's assume a 0 on the
+ * upper I/O lines is OK.
+ */
+ chip->write_buf(mtd, (uint8_t *)&word, 2);
+}
+
+/**
+ * nand_write_buf - [DEFAULT] write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ *
+ * Default write function for 8bit buswidth.
+ */
+static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ iowrite8_rep(chip->IO_ADDR_W, buf, len);
+}
+
+/**
+ * nand_read_buf - [DEFAULT] read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ *
+ * Default read function for 8bit buswidth.
+ */
+static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ ioread8_rep(chip->IO_ADDR_R, buf, len);
+}
+
+/**
+ * nand_write_buf16 - [DEFAULT] write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ *
+ * Default write function for 16bit buswidth.
+ */
+static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ u16 *p = (u16 *) buf;
+
+ iowrite16_rep(chip->IO_ADDR_W, p, len >> 1);
+}
+
+/**
+ * nand_read_buf16 - [DEFAULT] read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ *
+ * Default read function for 16bit buswidth.
+ */
+static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ u16 *p = (u16 *) buf;
+
+ ioread16_rep(chip->IO_ADDR_R, p, len >> 1);
+}
+
+/**
+ * nand_block_bad - [DEFAULT] Read bad block marker from the chip
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ *
+ * Check, if the block is bad.
+ */
+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
+{
+ int page, chipnr, res = 0, i = 0;
+ struct nand_chip *chip = mtd->priv;
+ u16 bad;
+
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+ ofs += mtd->erasesize - mtd->writesize;
+
+ page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+
+ if (getchip) {
+ chipnr = (int)(ofs >> chip->chip_shift);
+
+ nand_get_device(mtd, FL_READING);
+
+ /* Select the NAND device */
+ chip->select_chip(mtd, chipnr);
+ }
+
+ do {
+ if (chip->options & NAND_BUSWIDTH_16) {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB,
+ chip->badblockpos & 0xFE, page);
+ bad = cpu_to_le16(chip->read_word(mtd));
+ if (chip->badblockpos & 0x1)
+ bad >>= 8;
+ else
+ bad &= 0xFF;
+ } else {
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, chip->badblockpos,
+ page);
+ bad = chip->read_byte(mtd);
+ }
+
+ if (likely(chip->badblockbits == 8))
+ res = bad != 0xFF;
+ else
+ res = hweight8(bad) < chip->badblockbits;
+ ofs += mtd->writesize;
+ page = (int)(ofs >> chip->page_shift) & chip->pagemask;
+ i++;
+ } while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
+
+ if (getchip) {
+ chip->select_chip(mtd, -1);
+ nand_release_device(mtd);
+ }
+
+ return res;
+}
+
+/**
+ * nand_default_block_markbad - [DEFAULT] mark a block bad via bad block marker
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * This is the default implementation, which can be overridden by a hardware
+ * specific driver. It provides the details for writing a bad block marker to a
+ * block.
+ */
+static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
+ uint8_t buf[2] = { 0, 0 };
+ int ret = 0, res, i = 0;
+
+ memset(&ops, 0, sizeof(ops));
+ ops.oobbuf = buf;
+ ops.ooboffs = chip->badblockpos;
+ if (chip->options & NAND_BUSWIDTH_16) {
+ ops.ooboffs &= ~0x01;
+ ops.len = ops.ooblen = 2;
+ } else {
+ ops.len = ops.ooblen = 1;
+ }
+ ops.mode = MTD_OPS_PLACE_OOB;
+
+ /* Write to first/last page(s) if necessary */
+ if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
+ ofs += mtd->erasesize - mtd->writesize;
+ do {
+ res = nand_do_write_oob(mtd, ofs, &ops);
+ if (!ret)
+ ret = res;
+
+ i++;
+ ofs += mtd->writesize;
+ } while ((chip->bbt_options & NAND_BBT_SCAN2NDPAGE) && i < 2);
+
+ return ret;
+}
+
+/**
+ * nand_block_markbad_lowlevel - mark a block bad
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * This function performs the generic NAND bad block marking steps (i.e., bad
+ * block table(s) and/or marker(s)). We only allow the hardware driver to
+ * specify how to write bad block markers to OOB (chip->block_markbad).
+ *
+ * We try operations in the following order:
+ * (1) erase the affected block, to allow OOB marker to be written cleanly
+ * (2) write bad block marker to OOB area of affected block (unless flag
+ * NAND_BBT_NO_OOB_BBM is present)
+ * (3) update the BBT
+ * Note that we retain the first error encountered in (2) or (3), finish the
+ * procedures, and dump the error in the end.
+*/
+static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+ int res, ret = 0;
+
+ if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) {
+ struct erase_info einfo;
+
+ /* Attempt erase before marking OOB */
+ memset(&einfo, 0, sizeof(einfo));
+ einfo.mtd = mtd;
+ einfo.addr = ofs;
+ einfo.len = 1ULL << chip->phys_erase_shift;
+ nand_erase_nand(mtd, &einfo, 0);
+
+ /* Write bad block marker to OOB */
+ nand_get_device(mtd, FL_WRITING);
+ ret = chip->block_markbad(mtd, ofs);
+ nand_release_device(mtd);
+ }
+
+ /* Mark block bad in BBT */
+ if (chip->bbt) {
+ res = nand_markbad_bbt(mtd, ofs);
+ if (!ret)
+ ret = res;
+ }
+
+ if (!ret)
+ mtd->ecc_stats.badblocks++;
+
+ return ret;
+}
+
+/**
+ * nand_check_wp - [GENERIC] check if the chip is write protected
+ * @mtd: MTD device structure
+ *
+ * Check, if the device is write protected. The function expects, that the
+ * device is already selected.
+ */
+static int nand_check_wp(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ /* Broken xD cards report WP despite being writable */
+ if (chip->options & NAND_BROKEN_XD)
+ return 0;
+
+ /* Check the WP bit */
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ return (chip->read_byte(mtd) & NAND_STATUS_WP) ? 0 : 1;
+}
+
+/**
+ * nand_block_isreserved - [GENERIC] Check if a block is marked reserved.
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ *
+ * Check if the block is marked as reserved.
+ */
+static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (!chip->bbt)
+ return 0;
+ /* Return info from the table */
+ return nand_isreserved_bbt(mtd, ofs);
+}
+
+/**
+ * nand_block_checkbad - [GENERIC] Check if a block is marked bad
+ * @mtd: MTD device structure
+ * @ofs: offset from device start
+ * @getchip: 0, if the chip is already selected
+ * @allowbbt: 1, if its allowed to access the bbt area
+ *
+ * Check, if the block is bad. Either by reading the bad block table or
+ * calling of the scan function.
+ */
+static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
+ int allowbbt)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (!chip->bbt)
+ return chip->block_bad(mtd, ofs, getchip);
+
+ /* Return info from the table */
+ return nand_isbad_bbt(mtd, ofs, allowbbt);
+}
+
+/**
+ * panic_nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout
+ *
+ * Helper function for nand_wait_ready used when needing to wait in interrupt
+ * context.
+ */
+static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+ struct nand_chip *chip = mtd->priv;
+ int i;
+
+ /* Wait for the device to get ready */
+ for (i = 0; i < timeo; i++) {
+ if (chip->dev_ready(mtd))
+ break;
+ touch_softlockup_watchdog();
+ mdelay(1);
+ }
+}
+
+/**
+ * nand_wait_ready - [GENERIC] Wait for the ready pin after commands.
+ * @mtd: MTD device structure
+ *
+ * Wait for the ready pin after a command, and warn if a timeout occurs.
+ */
+void nand_wait_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ unsigned long timeo = 400;
+
+ if (in_interrupt() || oops_in_progress)
+ return panic_nand_wait_ready(mtd, timeo);
+
+ led_trigger_event(nand_led_trigger, LED_FULL);
+ /* Wait until command is processed or timeout occurs */
+ timeo = jiffies + msecs_to_jiffies(timeo);
+ do {
+ if (chip->dev_ready(mtd))
+ goto out;
+ cond_resched();
+ } while (time_before(jiffies, timeo));
+
+ pr_warn_ratelimited(
+ "timeout while waiting for chip to become ready\n");
+out:
+ led_trigger_event(nand_led_trigger, LED_OFF);
+}
+EXPORT_SYMBOL_GPL(nand_wait_ready);
+
+/**
+ * nand_wait_status_ready - [GENERIC] Wait for the ready status after commands.
+ * @mtd: MTD device structure
+ * @timeo: Timeout in ms
+ *
+ * Wait for status ready (i.e. command done) or timeout.
+ */
+static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
+{
+ register struct nand_chip *chip = mtd->priv;
+
+ timeo = jiffies + msecs_to_jiffies(timeo);
+ do {
+ if ((chip->read_byte(mtd) & NAND_STATUS_READY))
+ break;
+ touch_softlockup_watchdog();
+ } while (time_before(jiffies, timeo));
+};
+
+/**
+ * nand_command - [DEFAULT] Send command to NAND device
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
+ *
+ * Send command to NAND device. This function is used for small page devices
+ * (512 Bytes per page).
+ */
+static void nand_command(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+{
+ register struct nand_chip *chip = mtd->priv;
+ int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
+
+ /* Write out the command to the device */
+ if (command == NAND_CMD_SEQIN) {
+ int readcmd;
+
+ if (column >= mtd->writesize) {
+ /* OOB area */
+ column -= mtd->writesize;
+ readcmd = NAND_CMD_READOOB;
+ } else if (column < 256) {
+ /* First 256 bytes --> READ0 */
+ readcmd = NAND_CMD_READ0;
+ } else {
+ column -= 256;
+ readcmd = NAND_CMD_READ1;
+ }
+ chip->cmd_ctrl(mtd, readcmd, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ }
+ chip->cmd_ctrl(mtd, command, ctrl);
+
+ /* Address cycle, when necessary */
+ ctrl = NAND_CTRL_ALE | NAND_CTRL_CHANGE;
+ /* Serially input address */
+ if (column != -1) {
+ /* Adjust columns for 16 bit buswidth */
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
+ column >>= 1;
+ chip->cmd_ctrl(mtd, column, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ }
+ if (page_addr != -1) {
+ chip->cmd_ctrl(mtd, page_addr, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ chip->cmd_ctrl(mtd, page_addr >> 8, ctrl);
+ /* One more address cycle for devices > 32MiB */
+ if (chip->chipsize > (32 << 20))
+ chip->cmd_ctrl(mtd, page_addr >> 16, ctrl);
+ }
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ /*
+ * Program and erase have their own busy handlers status and sequential
+ * in needs no delay
+ */
+ switch (command) {
+
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_STATUS:
+ return;
+
+ case NAND_CMD_RESET:
+ if (chip->dev_ready)
+ break;
+ udelay(chip->chip_delay);
+ chip->cmd_ctrl(mtd, NAND_CMD_STATUS,
+ NAND_CTRL_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd,
+ NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+ /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+ nand_wait_status_ready(mtd, 250);
+ return;
+
+ /* This applies to read commands */
+ default:
+ /*
+ * If we don't have access to the busy pin, we apply the given
+ * command delay
+ */
+ if (!chip->dev_ready) {
+ udelay(chip->chip_delay);
+ return;
+ }
+ }
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
+ ndelay(100);
+
+ nand_wait_ready(mtd);
+}
+
+/**
+ * nand_command_lp - [DEFAULT] Send command to NAND large page device
+ * @mtd: MTD device structure
+ * @command: the command to be sent
+ * @column: the column address for this command, -1 if none
+ * @page_addr: the page address for this command, -1 if none
+ *
+ * Send command to NAND device. This is the version for the new large page
+ * devices. We don't have the separate regions as we have in the small page
+ * devices. We must emulate NAND_CMD_READOOB to keep the code compatible.
+ */
+static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+{
+ register struct nand_chip *chip = mtd->priv;
+
+ /* Emulate NAND_CMD_READOOB */
+ if (command == NAND_CMD_READOOB) {
+ column += mtd->writesize;
+ command = NAND_CMD_READ0;
+ }
+
+ /* Command latch cycle */
+ chip->cmd_ctrl(mtd, command, NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+
+ if (column != -1 || page_addr != -1) {
+ int ctrl = NAND_CTRL_CHANGE | NAND_NCE | NAND_ALE;
+
+ /* Serially input address */
+ if (column != -1) {
+ /* Adjust columns for 16 bit buswidth */
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
+ column >>= 1;
+ chip->cmd_ctrl(mtd, column, ctrl);
+ ctrl &= ~NAND_CTRL_CHANGE;
+ chip->cmd_ctrl(mtd, column >> 8, ctrl);
+ }
+ if (page_addr != -1) {
+ chip->cmd_ctrl(mtd, page_addr, ctrl);
+ chip->cmd_ctrl(mtd, page_addr >> 8,
+ NAND_NCE | NAND_ALE);
+ /* One more address cycle for devices > 128MiB */
+ if (chip->chipsize > (128 << 20))
+ chip->cmd_ctrl(mtd, page_addr >> 16,
+ NAND_NCE | NAND_ALE);
+ }
+ }
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE, NAND_NCE | NAND_CTRL_CHANGE);
+
+ /*
+ * Program and erase have their own busy handlers status, sequential
+ * in and status need no delay.
+ */
+ switch (command) {
+
+ case NAND_CMD_CACHEDPROG:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
+ case NAND_CMD_STATUS:
+ return;
+
+ case NAND_CMD_RESET:
+ if (chip->dev_ready)
+ break;
+ udelay(chip->chip_delay);
+ chip->cmd_ctrl(mtd, NAND_CMD_STATUS,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+ /* EZ-NAND can take upto 250ms as per ONFi v4.0 */
+ nand_wait_status_ready(mtd, 250);
+ return;
+
+ case NAND_CMD_RNDOUT:
+ /* No ready / busy check necessary */
+ chip->cmd_ctrl(mtd, NAND_CMD_RNDOUTSTART,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+ return;
+
+ case NAND_CMD_READ0:
+ chip->cmd_ctrl(mtd, NAND_CMD_READSTART,
+ NAND_NCE | NAND_CLE | NAND_CTRL_CHANGE);
+ chip->cmd_ctrl(mtd, NAND_CMD_NONE,
+ NAND_NCE | NAND_CTRL_CHANGE);
+
+ /* This applies to read commands */
+ default:
+ /*
+ * If we don't have access to the busy pin, we apply the given
+ * command delay.
+ */
+ if (!chip->dev_ready) {
+ udelay(chip->chip_delay);
+ return;
+ }
+ }
+
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine.
+ */
+ ndelay(100);
+
+ nand_wait_ready(mtd);
+}
+
+/**
+ * panic_nand_get_device - [GENERIC] Get chip for selected access
+ * @chip: the nand chip descriptor
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
+ *
+ * Used when in panic, no locks are taken.
+ */
+static void panic_nand_get_device(struct nand_chip *chip,
+ struct mtd_info *mtd, int new_state)
+{
+ /* Hardware controller shared among independent devices */
+ chip->controller->active = chip;
+ chip->state = new_state;
+}
+
+/**
+ * nand_get_device - [GENERIC] Get chip for selected access
+ * @mtd: MTD device structure
+ * @new_state: the state which is requested
+ *
+ * Get the device and lock it for exclusive access
+ */
+static int
+nand_get_device(struct mtd_info *mtd, int new_state)
+{
+ struct nand_chip *chip = mtd->priv;
+ spinlock_t *lock = &chip->controller->lock;
+ wait_queue_head_t *wq = &chip->controller->wq;
+ DECLARE_WAITQUEUE(wait, current);
+retry:
+ spin_lock(lock);
+
+ /* Hardware controller shared among independent devices */
+ if (!chip->controller->active)
+ chip->controller->active = chip;
+
+ if (chip->controller->active == chip && chip->state == FL_READY) {
+ chip->state = new_state;
+ spin_unlock(lock);
+ return 0;
+ }
+ if (new_state == FL_PM_SUSPENDED) {
+ if (chip->controller->active->state == FL_PM_SUSPENDED) {
+ chip->state = FL_PM_SUSPENDED;
+ spin_unlock(lock);
+ return 0;
+ }
+ }
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ add_wait_queue(wq, &wait);
+ spin_unlock(lock);
+ schedule();
+ remove_wait_queue(wq, &wait);
+ goto retry;
+}
+
+/**
+ * panic_nand_wait - [GENERIC] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ * @timeo: timeout
+ *
+ * Wait for command done. This is a helper function for nand_wait used when
+ * we are in interrupt context. May happen when in panic and trying to write
+ * an oops through mtdoops.
+ */
+static void panic_nand_wait(struct mtd_info *mtd, struct nand_chip *chip,
+ unsigned long timeo)
+{
+ int i;
+ for (i = 0; i < timeo; i++) {
+ if (chip->dev_ready) {
+ if (chip->dev_ready(mtd))
+ break;
+ } else {
+ if (chip->read_byte(mtd) & NAND_STATUS_READY)
+ break;
+ }
+ mdelay(1);
+ }
+}
+
+/**
+ * nand_wait - [DEFAULT] wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND chip structure
+ *
+ * Wait for command done. This applies to erase and program only.
+ */
+static int nand_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+
+ int status;
+ unsigned long timeo = 400;
+
+ led_trigger_event(nand_led_trigger, LED_FULL);
+
+ /*
+ * Apply this short delay always to ensure that we do wait tWB in any
+ * case on any machine.
+ */
+ ndelay(100);
+
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+
+ if (in_interrupt() || oops_in_progress)
+ panic_nand_wait(mtd, chip, timeo);
+ else {
+ timeo = jiffies + msecs_to_jiffies(timeo);
+ do {
+ if (chip->dev_ready) {
+ if (chip->dev_ready(mtd))
+ break;
+ } else {
+ if (chip->read_byte(mtd) & NAND_STATUS_READY)
+ break;
+ }
+ cond_resched();
+ } while (time_before(jiffies, timeo));
+ }
+ led_trigger_event(nand_led_trigger, LED_OFF);
+
+ status = (int)chip->read_byte(mtd);
+ /* This can happen if in case of timeout or buggy dev_ready */
+ WARN_ON(!(status & NAND_STATUS_READY));
+ return status;
+}
+
+/**
+ * __nand_unlock - [REPLACEABLE] unlocks specified locked blocks
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ * @invert: when = 0, unlock the range of blocks within the lower and
+ * upper boundary address
+ * when = 1, unlock the range of blocks outside the boundaries
+ * of the lower and upper boundary address
+ *
+ * Returs unlock status.
+ */
+static int __nand_unlock(struct mtd_info *mtd, loff_t ofs,
+ uint64_t len, int invert)
+{
+ int ret = 0;
+ int status, page;
+ struct nand_chip *chip = mtd->priv;
+
+ /* Submit address of first page to unlock */
+ page = ofs >> chip->page_shift;
+ chip->cmdfunc(mtd, NAND_CMD_UNLOCK1, -1, page & chip->pagemask);
+
+ /* Submit address of last page to unlock */
+ page = (ofs + len) >> chip->page_shift;
+ chip->cmdfunc(mtd, NAND_CMD_UNLOCK2, -1,
+ (page | invert) & chip->pagemask);
+
+ /* Call wait ready function */
+ status = chip->waitfunc(mtd, chip);
+ /* See if device thinks it succeeded */
+ if (status & NAND_STATUS_FAIL) {
+ pr_debug("%s: error status = 0x%08x\n",
+ __func__, status);
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+/**
+ * nand_unlock - [REPLACEABLE] unlocks specified locked blocks
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ *
+ * Returns unlock status.
+ */
+int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ int ret = 0;
+ int chipnr;
+ struct nand_chip *chip = mtd->priv;
+
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)ofs, len);
+
+ if (check_offs_len(mtd, ofs, len))
+ return -EINVAL;
+
+ /* Align to last block address if size addresses end of the device */
+ if (ofs + len == mtd->size)
+ len -= mtd->erasesize;
+
+ nand_get_device(mtd, FL_UNLOCKING);
+
+ /* Shift to get chip number */
+ chipnr = ofs >> chip->chip_shift;
+
+ chip->select_chip(mtd, chipnr);
+
+ /*
+ * Reset the chip.
+ * If we want to check the WP through READ STATUS and check the bit 7
+ * we must reset the chip
+ * some operation can also clear the bit 7 of status register
+ * eg. erase/program a locked block
+ */
+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+ /* Check, if it is write protected */
+ if (nand_check_wp(mtd)) {
+ pr_debug("%s: device is write protected!\n",
+ __func__);
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = __nand_unlock(mtd, ofs, len, 0);
+
+out:
+ chip->select_chip(mtd, -1);
+ nand_release_device(mtd);
+
+ return ret;
+}
+EXPORT_SYMBOL(nand_unlock);
+
+/**
+ * nand_lock - [REPLACEABLE] locks all blocks present in the device
+ * @mtd: mtd info
+ * @ofs: offset to start unlock from
+ * @len: length to unlock
+ *
+ * This feature is not supported in many NAND parts. 'Micron' NAND parts do
+ * have this feature, but it allows only to lock all blocks, not for specified
+ * range for block. Implementing 'lock' feature by making use of 'unlock', for
+ * now.
+ *
+ * Returns lock status.
+ */
+int nand_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
+{
+ int ret = 0;
+ int chipnr, status, page;
+ struct nand_chip *chip = mtd->priv;
+
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)ofs, len);
+
+ if (check_offs_len(mtd, ofs, len))
+ return -EINVAL;
+
+ nand_get_device(mtd, FL_LOCKING);
+
+ /* Shift to get chip number */
+ chipnr = ofs >> chip->chip_shift;
+
+ chip->select_chip(mtd, chipnr);
+
+ /*
+ * Reset the chip.
+ * If we want to check the WP through READ STATUS and check the bit 7
+ * we must reset the chip
+ * some operation can also clear the bit 7 of status register
+ * eg. erase/program a locked block
+ */
+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+ /* Check, if it is write protected */
+ if (nand_check_wp(mtd)) {
+ pr_debug("%s: device is write protected!\n",
+ __func__);
+ status = MTD_ERASE_FAILED;
+ ret = -EIO;
+ goto out;
+ }
+
+ /* Submit address of first page to lock */
+ page = ofs >> chip->page_shift;
+ chip->cmdfunc(mtd, NAND_CMD_LOCK, -1, page & chip->pagemask);
+
+ /* Call wait ready function */
+ status = chip->waitfunc(mtd, chip);
+ /* See if device thinks it succeeded */
+ if (status & NAND_STATUS_FAIL) {
+ pr_debug("%s: error status = 0x%08x\n",
+ __func__, status);
+ ret = -EIO;
+ goto out;
+ }
+
+ ret = __nand_unlock(mtd, ofs, len, 0x1);
+
+out:
+ chip->select_chip(mtd, -1);
+ nand_release_device(mtd);
+
+ return ret;
+}
+EXPORT_SYMBOL(nand_lock);
+
+/**
+ * nand_check_erased_buf - check if a buffer contains (almost) only 0xff data
+ * @buf: buffer to test
+ * @len: buffer length
+ * @bitflips_threshold: maximum number of bitflips
+ *
+ * Check if a buffer contains only 0xff, which means the underlying region
+ * has been erased and is ready to be programmed.
+ * The bitflips_threshold specify the maximum number of bitflips before
+ * considering the region is not erased.
+ * Note: The logic of this function has been extracted from the memweight
+ * implementation, except that nand_check_erased_buf function exit before
+ * testing the whole buffer if the number of bitflips exceed the
+ * bitflips_threshold value.
+ *
+ * Returns a positive number of bitflips less than or equal to
+ * bitflips_threshold, or -ERROR_CODE for bitflips in excess of the
+ * threshold.
+ */
+static int nand_check_erased_buf(void *buf, int len, int bitflips_threshold)
+{
+ const unsigned char *bitmap = buf;
+ int bitflips = 0;
+ int weight;
+
+ for (; len && ((uintptr_t)bitmap) % sizeof(long);
+ len--, bitmap++) {
+ weight = hweight8(*bitmap);
+ bitflips += BITS_PER_BYTE - weight;
+ if (unlikely(bitflips > bitflips_threshold))
+ return -EBADMSG;
+ }
+
+ for (; len >= sizeof(long);
+ len -= sizeof(long), bitmap += sizeof(long)) {
+ weight = hweight_long(*((unsigned long *)bitmap));
+ bitflips += BITS_PER_LONG - weight;
+ if (unlikely(bitflips > bitflips_threshold))
+ return -EBADMSG;
+ }
+
+ for (; len > 0; len--, bitmap++) {
+ weight = hweight8(*bitmap);
+ bitflips += BITS_PER_BYTE - weight;
+ if (unlikely(bitflips > bitflips_threshold))
+ return -EBADMSG;
+ }
+
+ return bitflips;
+}
+
+/**
+ * nand_check_erased_ecc_chunk - check if an ECC chunk contains (almost) only
+ * 0xff data
+ * @data: data buffer to test
+ * @datalen: data length
+ * @ecc: ECC buffer
+ * @ecclen: ECC length
+ * @extraoob: extra OOB buffer
+ * @extraooblen: extra OOB length
+ * @bitflips_threshold: maximum number of bitflips
+ *
+ * Check if a data buffer and its associated ECC and OOB data contains only
+ * 0xff pattern, which means the underlying region has been erased and is
+ * ready to be programmed.
+ * The bitflips_threshold specify the maximum number of bitflips before
+ * considering the region as not erased.
+ *
+ * Note:
+ * 1/ ECC algorithms are working on pre-defined block sizes which are usually
+ * different from the NAND page size. When fixing bitflips, ECC engines will
+ * report the number of errors per chunk, and the NAND core infrastructure
+ * expect you to return the maximum number of bitflips for the whole page.
+ * This is why you should always use this function on a single chunk and
+ * not on the whole page. After checking each chunk you should update your
+ * max_bitflips value accordingly.
+ * 2/ When checking for bitflips in erased pages you should not only check
+ * the payload data but also their associated ECC data, because a user might
+ * have programmed almost all bits to 1 but a few. In this case, we
+ * shouldn't consider the chunk as erased, and checking ECC bytes prevent
+ * this case.
+ * 3/ The extraoob argument is optional, and should be used if some of your OOB
+ * data are protected by the ECC engine.
+ * It could also be used if you support subpages and want to attach some
+ * extra OOB data to an ECC chunk.
+ *
+ * Returns a positive number of bitflips less than or equal to
+ * bitflips_threshold, or -ERROR_CODE for bitflips in excess of the
+ * threshold. In case of success, the passed buffers are filled with 0xff.
+ */
+int nand_check_erased_ecc_chunk(void *data, int datalen,
+ void *ecc, int ecclen,
+ void *extraoob, int extraooblen,
+ int bitflips_threshold)
+{
+ int data_bitflips = 0, ecc_bitflips = 0, extraoob_bitflips = 0;
+
+ data_bitflips = nand_check_erased_buf(data, datalen,
+ bitflips_threshold);
+ if (data_bitflips < 0)
+ return data_bitflips;
+
+ bitflips_threshold -= data_bitflips;
+
+ ecc_bitflips = nand_check_erased_buf(ecc, ecclen, bitflips_threshold);
+ if (ecc_bitflips < 0)
+ return ecc_bitflips;
+
+ bitflips_threshold -= ecc_bitflips;
+
+ extraoob_bitflips = nand_check_erased_buf(extraoob, extraooblen,
+ bitflips_threshold);
+ if (extraoob_bitflips < 0)
+ return extraoob_bitflips;
+
+ if (data_bitflips)
+ memset(data, 0xff, datalen);
+
+ if (ecc_bitflips)
+ memset(ecc, 0xff, ecclen);
+
+ if (extraoob_bitflips)
+ memset(extraoob, 0xff, extraooblen);
+
+ return data_bitflips + ecc_bitflips + extraoob_bitflips;
+}
+EXPORT_SYMBOL(nand_check_erased_ecc_chunk);
+
+/**
+ * nand_read_page_raw - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
+ *
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
+ */
+static int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ chip->read_buf(mtd, buf, mtd->writesize);
+ if (oob_required)
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+/**
+ * nand_read_page_raw_syndrome - [INTERN] read raw page data without ecc
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
+ *
+ * We need a special oob layout and handling even when OOB isn't used.
+ */
+static int nand_read_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ uint8_t *oob = chip->oob_poi;
+ int steps, size;
+
+ for (steps = chip->ecc.steps; steps > 0; steps--) {
+ chip->read_buf(mtd, buf, eccsize);
+ buf += eccsize;
+
+ if (chip->ecc.prepad) {
+ chip->read_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->read_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ size = mtd->oobsize - (oob - chip->oob_poi);
+ if (size)
+ chip->read_buf(mtd, oob, size);
+
+ return 0;
+}
+
+/**
+ * nand_read_page_swecc - [REPLACEABLE] software ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
+ */
+static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ unsigned int max_bitflips = 0;
+
+ chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+ eccsteps = chip->ecc.steps;
+ p = buf;
+
+ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+ }
+ return max_bitflips;
+}
+
+/**
+ * nand_read_subpage - [REPLACEABLE] ECC based sub-page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @data_offs: offset of requested data within the page
+ * @readlen: data length
+ * @bufpoi: buffer to store read data
+ * @page: page number to read
+ */
+static int nand_read_subpage(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
+ int page)
+{
+ int start_step, end_step, num_steps;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *p;
+ int data_col_addr, i, gaps = 0;
+ int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
+ int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
+ int index;
+ unsigned int max_bitflips = 0;
+
+ /* Column address within the page aligned to ECC size (256bytes) */
+ start_step = data_offs / chip->ecc.size;
+ end_step = (data_offs + readlen - 1) / chip->ecc.size;
+ num_steps = end_step - start_step + 1;
+ index = start_step * chip->ecc.bytes;
+
+ /* Data size aligned to ECC ecc.size */
+ datafrag_len = num_steps * chip->ecc.size;
+ eccfrag_len = num_steps * chip->ecc.bytes;
+
+ data_col_addr = start_step * chip->ecc.size;
+ /* If we read not a page aligned data */
+ if (data_col_addr != 0)
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, data_col_addr, -1);
+
+ p = bufpoi + data_col_addr;
+ chip->read_buf(mtd, p, datafrag_len);
+
+ /* Calculate ECC */
+ for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size)
+ chip->ecc.calculate(mtd, p, &chip->buffers->ecccalc[i]);
+
+ /*
+ * The performance is faster if we position offsets according to
+ * ecc.pos. Let's make sure that there are no gaps in ECC positions.
+ */
+ for (i = 0; i < eccfrag_len - 1; i++) {
+ if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
+ gaps = 1;
+ break;
+ }
+ }
+ if (gaps) {
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ } else {
+ /*
+ * Send the command to read the particular ECC bytes take care
+ * about buswidth alignment in read_buf.
+ */
+ aligned_pos = eccpos[index] & ~(busw - 1);
+ aligned_len = eccfrag_len;
+ if (eccpos[index] & (busw - 1))
+ aligned_len++;
+ if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
+ aligned_len++;
+
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+ mtd->writesize + aligned_pos, -1);
+ chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
+ }
+
+ for (i = 0; i < eccfrag_len; i++)
+ chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
+
+ p = bufpoi + data_col_addr;
+ for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
+ int stat;
+
+ stat = chip->ecc.correct(mtd, p,
+ &chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+ }
+ return max_bitflips;
+}
+
+/**
+ * nand_read_page_hwecc - [REPLACEABLE] hardware ECC based page read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
+ *
+ * Not for syndrome calculating ECC controllers which need a special oob layout.
+ */
+static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ unsigned int max_bitflips = 0;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+ }
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+ eccsteps = chip->ecc.steps;
+ p = buf;
+
+ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+ }
+ return max_bitflips;
+}
+
+/**
+ * nand_read_page_hwecc_oob_first - [REPLACEABLE] hw ecc, read oob first
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
+ *
+ * Hardware ECC for large page chips, require OOB to be read first. For this
+ * ECC mode, the write_page method is re-used from ECC_HW. These methods
+ * read/write ECC from the OOB area, unlike the ECC_HW_SYNDROME support with
+ * multiple ECC steps, follows the "infix ECC" scheme and reads/writes ECC from
+ * the data area, by overwriting the NAND manufacturer bad block markings.
+ */
+static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ unsigned int max_bitflips = 0;
+
+ /* Read the OOB area first */
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
+
+ for (i = 0; i < chip->ecc.total; i++)
+ ecc_code[i] = chip->oob_poi[eccpos[i]];
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+ stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+ }
+ return max_bitflips;
+}
+
+/**
+ * nand_read_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
+ *
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
+ */
+static int nand_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+ unsigned int max_bitflips = 0;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ int stat;
+
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+ chip->read_buf(mtd, p, eccsize);
+
+ if (chip->ecc.prepad) {
+ chip->read_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->ecc.hwctl(mtd, NAND_ECC_READSYN);
+ chip->read_buf(mtd, oob, eccbytes);
+ stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->read_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ /* Calculate remaining oob bytes */
+ i = mtd->oobsize - (oob - chip->oob_poi);
+ if (i)
+ chip->read_buf(mtd, oob, i);
+
+ return max_bitflips;
+}
+
+/**
+ * nand_transfer_oob - [INTERN] Transfer oob to client buffer
+ * @chip: nand chip structure
+ * @oob: oob destination address
+ * @ops: oob ops structure
+ * @len: size of oob to transfer
+ */
+static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
+ struct mtd_oob_ops *ops, size_t len)
+{
+ switch (ops->mode) {
+
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
+ memcpy(oob, chip->oob_poi + ops->ooboffs, len);
+ return oob + len;
+
+ case MTD_OPS_AUTO_OOB: {
+ struct nand_oobfree *free = chip->ecc.layout->oobfree;
+ uint32_t boffs = 0, roffs = ops->ooboffs;
+ size_t bytes = 0;
+
+ for (; free->length && len; free++, len -= bytes) {
+ /* Read request not from offset 0? */
+ if (unlikely(roffs)) {
+ if (roffs >= free->length) {
+ roffs -= free->length;
+ continue;
+ }
+ boffs = free->offset + roffs;
+ bytes = min_t(size_t, len,
+ (free->length - roffs));
+ roffs = 0;
+ } else {
+ bytes = min_t(size_t, len, free->length);
+ boffs = free->offset;
+ }
+ memcpy(oob, chip->oob_poi + boffs, bytes);
+ oob += bytes;
+ }
+ return oob;
+ }
+ default:
+ BUG();
+ }
+ return NULL;
+}
+
+/**
+ * nand_setup_read_retry - [INTERN] Set the READ RETRY mode
+ * @mtd: MTD device structure
+ * @retry_mode: the retry mode to use
+ *
+ * Some vendors supply a special command to shift the Vt threshold, to be used
+ * when there are too many bitflips in a page (i.e., ECC error). After setting
+ * a new threshold, the host should retry reading the page.
+ */
+static int nand_setup_read_retry(struct mtd_info *mtd, int retry_mode)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ pr_debug("setting READ RETRY mode %d\n", retry_mode);
+
+ if (retry_mode >= chip->read_retries)
+ return -EINVAL;
+
+ if (!chip->setup_read_retry)
+ return -EOPNOTSUPP;
+
+ return chip->setup_read_retry(mtd, retry_mode);
+}
+
+/**
+ * nand_do_read_ops - [INTERN] Read data with ECC
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob ops structure
+ *
+ * Internal function. Called with chip held.
+ */
+static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ int chipnr, page, realpage, col, bytes, aligned, oob_required;
+ struct nand_chip *chip = mtd->priv;
+ int ret = 0;
+ uint32_t readlen = ops->len;
+ uint32_t oobreadlen = ops->ooblen;
+ uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
+ mtd->oobavail : mtd->oobsize;
+
+ uint8_t *bufpoi, *oob, *buf;
+ int use_bufpoi;
+ unsigned int max_bitflips = 0;
+ int retry_mode = 0;
+ bool ecc_fail = false;
+
+ chipnr = (int)(from >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ realpage = (int)(from >> chip->page_shift);
+ page = realpage & chip->pagemask;
+
+ col = (int)(from & (mtd->writesize - 1));
+
+ buf = ops->datbuf;
+ oob = ops->oobbuf;
+ oob_required = oob ? 1 : 0;
+
+ while (1) {
+ unsigned int ecc_failures = mtd->ecc_stats.failed;
+
+ bytes = min(mtd->writesize - col, readlen);
+ aligned = (bytes == mtd->writesize);
+
+ if (!aligned)
+ use_bufpoi = 1;
+ else if (chip->options & NAND_USE_BOUNCE_BUFFER)
+ use_bufpoi = !virt_addr_valid(buf);
+ else
+ use_bufpoi = 0;
+
+ /* Is the current page in the buffer? */
+ if (realpage != chip->pagebuf || oob) {
+ bufpoi = use_bufpoi ? chip->buffers->databuf : buf;
+
+ if (use_bufpoi && aligned)
+ pr_debug("%s: using read bounce buffer for buf@%p\n",
+ __func__, buf);
+
+read_retry:
+ chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, page);
+
+ /*
+ * Now read the page into the buffer. Absent an error,
+ * the read methods return max bitflips per ecc step.
+ */
+ if (unlikely(ops->mode == MTD_OPS_RAW))
+ ret = chip->ecc.read_page_raw(mtd, chip, bufpoi,
+ oob_required,
+ page);
+ else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) &&
+ !oob)
+ ret = chip->ecc.read_subpage(mtd, chip,
+ col, bytes, bufpoi,
+ page);
+ else
+ ret = chip->ecc.read_page(mtd, chip, bufpoi,
+ oob_required, page);
+ if (ret < 0) {
+ if (use_bufpoi)
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
+ break;
+ }
+
+ max_bitflips = max_t(unsigned int, max_bitflips, ret);
+
+ /* Transfer not aligned data */
+ if (use_bufpoi) {
+ if (!NAND_HAS_SUBPAGE_READ(chip) && !oob &&
+ !(mtd->ecc_stats.failed - ecc_failures) &&
+ (ops->mode != MTD_OPS_RAW)) {
+ chip->pagebuf = realpage;
+ chip->pagebuf_bitflips = ret;
+ } else {
+ /* Invalidate page cache */
+ chip->pagebuf = -1;
+ }
+ memcpy(buf, chip->buffers->databuf + col, bytes);
+ }
+
+ if (unlikely(oob)) {
+ int toread = min(oobreadlen, max_oobsize);
+
+ if (toread) {
+ oob = nand_transfer_oob(chip,
+ oob, ops, toread);
+ oobreadlen -= toread;
+ }
+ }
+
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
+
+ if (mtd->ecc_stats.failed - ecc_failures) {
+ if (retry_mode + 1 < chip->read_retries) {
+ retry_mode++;
+ ret = nand_setup_read_retry(mtd,
+ retry_mode);
+ if (ret < 0)
+ break;
+
+ /* Reset failures; retry */
+ mtd->ecc_stats.failed = ecc_failures;
+ goto read_retry;
+ } else {
+ /* No more retry modes; real failure */
+ ecc_fail = true;
+ }
+ }
+
+ buf += bytes;
+ } else {
+ memcpy(buf, chip->buffers->databuf + col, bytes);
+ buf += bytes;
+ max_bitflips = max_t(unsigned int, max_bitflips,
+ chip->pagebuf_bitflips);
+ }
+
+ readlen -= bytes;
+
+ /* Reset to retry mode 0 */
+ if (retry_mode) {
+ ret = nand_setup_read_retry(mtd, 0);
+ if (ret < 0)
+ break;
+ retry_mode = 0;
+ }
+
+ if (!readlen)
+ break;
+
+ /* For subsequent reads align to page boundary */
+ col = 0;
+ /* Increment page address */
+ realpage++;
+
+ page = realpage & chip->pagemask;
+ /* Check, if we cross a chip boundary */
+ if (!page) {
+ chipnr++;
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
+ }
+ }
+ chip->select_chip(mtd, -1);
+
+ ops->retlen = ops->len - (size_t) readlen;
+ if (oob)
+ ops->oobretlen = ops->ooblen - oobreadlen;
+
+ if (ret < 0)
+ return ret;
+
+ if (ecc_fail)
+ return -EBADMSG;
+
+ return max_bitflips;
+}
+
+/**
+ * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @len: number of bytes to read
+ * @retlen: pointer to variable to store the number of read bytes
+ * @buf: the databuffer to put data
+ *
+ * Get hold of the chip and call nand_do_read.
+ */
+static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
+ size_t *retlen, uint8_t *buf)
+{
+ struct mtd_oob_ops ops;
+ int ret;
+
+ nand_get_device(mtd, FL_READING);
+ memset(&ops, 0, sizeof(ops));
+ ops.len = len;
+ ops.datbuf = buf;
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ret = nand_do_read_ops(mtd, from, &ops);
+ *retlen = ops.retlen;
+ nand_release_device(mtd);
+ return ret;
+}
+
+/**
+ * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ */
+static int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+/**
+ * nand_read_oob_syndrome - [REPLACEABLE] OOB data read function for HW ECC
+ * with syndromes
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to read
+ */
+static int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ int length = mtd->oobsize;
+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+ int eccsize = chip->ecc.size;
+ uint8_t *bufpoi = chip->oob_poi;
+ int i, toread, sndrnd = 0, pos;
+
+ chip->cmdfunc(mtd, NAND_CMD_READ0, chip->ecc.size, page);
+ for (i = 0; i < chip->ecc.steps; i++) {
+ if (sndrnd) {
+ pos = eccsize + i * (eccsize + chunk);
+ if (mtd->writesize > 512)
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, pos, -1);
+ else
+ chip->cmdfunc(mtd, NAND_CMD_READ0, pos, page);
+ } else
+ sndrnd = 1;
+ toread = min_t(int, length, chunk);
+ chip->read_buf(mtd, bufpoi, toread);
+ bufpoi += toread;
+ length -= toread;
+ }
+ if (length > 0)
+ chip->read_buf(mtd, bufpoi, length);
+
+ return 0;
+}
+
+/**
+ * nand_write_oob_std - [REPLACEABLE] the most common OOB data write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
+ */
+static int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ int status = 0;
+ const uint8_t *buf = chip->oob_poi;
+ int length = mtd->oobsize;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+ chip->write_buf(mtd, buf, length);
+ /* Send command to program the OOB data */
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/**
+ * nand_write_oob_syndrome - [REPLACEABLE] OOB data write function for HW ECC
+ * with syndrome - only for large page flash
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @page: page number to write
+ */
+static int nand_write_oob_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip, int page)
+{
+ int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+ int eccsize = chip->ecc.size, length = mtd->oobsize;
+ int i, len, pos, status = 0, sndcmd = 0, steps = chip->ecc.steps;
+ const uint8_t *bufpoi = chip->oob_poi;
+
+ /*
+ * data-ecc-data-ecc ... ecc-oob
+ * or
+ * data-pad-ecc-pad-data-pad .... ecc-pad-oob
+ */
+ if (!chip->ecc.prepad && !chip->ecc.postpad) {
+ pos = steps * (eccsize + chunk);
+ steps = 0;
+ } else
+ pos = eccsize;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
+ for (i = 0; i < steps; i++) {
+ if (sndcmd) {
+ if (mtd->writesize <= 512) {
+ uint32_t fill = 0xFFFFFFFF;
+
+ len = eccsize;
+ while (len > 0) {
+ int num = min_t(int, len, 4);
+ chip->write_buf(mtd, (uint8_t *)&fill,
+ num);
+ len -= num;
+ }
+ } else {
+ pos = eccsize + i * (eccsize + chunk);
+ chip->cmdfunc(mtd, NAND_CMD_RNDIN, pos, -1);
+ }
+ } else
+ sndcmd = 1;
+ len = min_t(int, length, chunk);
+ chip->write_buf(mtd, bufpoi, len);
+ bufpoi += len;
+ length -= len;
+ }
+ if (length > 0)
+ chip->write_buf(mtd, bufpoi, length);
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+
+ return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+/**
+ * nand_do_read_oob - [INTERN] NAND read out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operations description structure
+ *
+ * NAND read out-of-band data from the spare area.
+ */
+static int nand_do_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ int page, realpage, chipnr;
+ struct nand_chip *chip = mtd->priv;
+ struct mtd_ecc_stats stats;
+ int readlen = ops->ooblen;
+ int len;
+ uint8_t *buf = ops->oobbuf;
+ int ret = 0;
+
+ pr_debug("%s: from = 0x%08Lx, len = %i\n",
+ __func__, (unsigned long long)from, readlen);
+
+ stats = mtd->ecc_stats;
+
+ if (ops->mode == MTD_OPS_AUTO_OOB)
+ len = chip->ecc.layout->oobavail;
+ else
+ len = mtd->oobsize;
+
+ if (unlikely(ops->ooboffs >= len)) {
+ pr_debug("%s: attempt to start read outside oob\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Do not allow reads past end of device */
+ if (unlikely(from >= mtd->size ||
+ ops->ooboffs + readlen > ((mtd->size >> chip->page_shift) -
+ (from >> chip->page_shift)) * len)) {
+ pr_debug("%s: attempt to read beyond end of device\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ chipnr = (int)(from >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ /* Shift to get page */
+ realpage = (int)(from >> chip->page_shift);
+ page = realpage & chip->pagemask;
+
+ while (1) {
+ if (ops->mode == MTD_OPS_RAW)
+ ret = chip->ecc.read_oob_raw(mtd, chip, page);
+ else
+ ret = chip->ecc.read_oob(mtd, chip, page);
+
+ if (ret < 0)
+ break;
+
+ len = min(len, readlen);
+ buf = nand_transfer_oob(chip, buf, ops, len);
+
+ if (chip->options & NAND_NEED_READRDY) {
+ /* Apply delay or wait for ready/busy pin */
+ if (!chip->dev_ready)
+ udelay(chip->chip_delay);
+ else
+ nand_wait_ready(mtd);
+ }
+
+ readlen -= len;
+ if (!readlen)
+ break;
+
+ /* Increment page address */
+ realpage++;
+
+ page = realpage & chip->pagemask;
+ /* Check, if we cross a chip boundary */
+ if (!page) {
+ chipnr++;
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
+ }
+ }
+ chip->select_chip(mtd, -1);
+
+ ops->oobretlen = ops->ooblen - readlen;
+
+ if (ret < 0)
+ return ret;
+
+ if (mtd->ecc_stats.failed - stats.failed)
+ return -EBADMSG;
+
+ return mtd->ecc_stats.corrected - stats.corrected ? -EUCLEAN : 0;
+}
+
+/**
+ * nand_read_oob - [MTD Interface] NAND read data and/or out-of-band
+ * @mtd: MTD device structure
+ * @from: offset to read from
+ * @ops: oob operation description structure
+ *
+ * NAND read data and/or out-of-band data.
+ */
+static int nand_read_oob(struct mtd_info *mtd, loff_t from,
+ struct mtd_oob_ops *ops)
+{
+ int ret = -ENOTSUPP;
+
+ ops->retlen = 0;
+
+ /* Do not allow reads past end of device */
+ if (ops->datbuf && (from + ops->len) > mtd->size) {
+ pr_debug("%s: attempt to read beyond end of device\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ nand_get_device(mtd, FL_READING);
+
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
+ break;
+
+ default:
+ goto out;
+ }
+
+ if (!ops->datbuf)
+ ret = nand_do_read_oob(mtd, from, ops);
+ else
+ ret = nand_do_read_ops(mtd, from, ops);
+
+out:
+ nand_release_device(mtd);
+ return ret;
+}
+
+
+/**
+ * nand_write_page_raw - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ *
+ * Not for syndrome calculating ECC controllers, which use a special oob layout.
+ */
+static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
+{
+ chip->write_buf(mtd, buf, mtd->writesize);
+ if (oob_required)
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+/**
+ * nand_write_page_raw_syndrome - [INTERN] raw page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ *
+ * We need a special oob layout and handling even when ECC isn't checked.
+ */
+static int nand_write_page_raw_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ int eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ uint8_t *oob = chip->oob_poi;
+ int steps, size;
+
+ for (steps = chip->ecc.steps; steps > 0; steps--) {
+ chip->write_buf(mtd, buf, eccsize);
+ buf += eccsize;
+
+ if (chip->ecc.prepad) {
+ chip->write_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->write_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->write_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ size = mtd->oobsize - (oob - chip->oob_poi);
+ if (size)
+ chip->write_buf(mtd, oob, size);
+
+ return 0;
+}
+/**
+ * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ */
+static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ const uint8_t *p = buf;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+ /* Software ECC calculation */
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+
+ for (i = 0; i < chip->ecc.total; i++)
+ chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+ return chip->ecc.write_page_raw(mtd, chip, buf, 1, page);
+}
+
+/**
+ * nand_write_page_hwecc - [REPLACEABLE] hardware ECC based page write function
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ */
+static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ const uint8_t *p = buf;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+ chip->write_buf(mtd, p, eccsize);
+ chip->ecc.calculate(mtd, p, &ecc_calc[i]);
+ }
+
+ for (i = 0; i < chip->ecc.total; i++)
+ chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+
+/**
+ * nand_write_subpage_hwecc - [REPLACEABLE] hardware ECC based subpage write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @offset: column address of subpage within the page
+ * @data_len: data length
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ */
+static int nand_write_subpage_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, uint32_t offset,
+ uint32_t data_len, const uint8_t *buf,
+ int oob_required, int page)
+{
+ uint8_t *oob_buf = chip->oob_poi;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ int ecc_size = chip->ecc.size;
+ int ecc_bytes = chip->ecc.bytes;
+ int ecc_steps = chip->ecc.steps;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint32_t start_step = offset / ecc_size;
+ uint32_t end_step = (offset + data_len - 1) / ecc_size;
+ int oob_bytes = mtd->oobsize / ecc_steps;
+ int step, i;
+
+ for (step = 0; step < ecc_steps; step++) {
+ /* configure controller for WRITE access */
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+ /* write data (untouched subpages already masked by 0xFF) */
+ chip->write_buf(mtd, buf, ecc_size);
+
+ /* mask ECC of un-touched subpages by padding 0xFF */
+ if ((step < start_step) || (step > end_step))
+ memset(ecc_calc, 0xff, ecc_bytes);
+ else
+ chip->ecc.calculate(mtd, buf, ecc_calc);
+
+ /* mask OOB of un-touched subpages by padding 0xFF */
+ /* if oob_required, preserve OOB metadata of written subpage */
+ if (!oob_required || (step < start_step) || (step > end_step))
+ memset(oob_buf, 0xff, oob_bytes);
+
+ buf += ecc_size;
+ ecc_calc += ecc_bytes;
+ oob_buf += oob_bytes;
+ }
+
+ /* copy calculated ECC for whole page to chip->buffer->oob */
+ /* this include masked-value(0xFF) for unwritten subpages */
+ ecc_calc = chip->buffers->ecccalc;
+ for (i = 0; i < chip->ecc.total; i++)
+ chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+ /* write OOB buffer to NAND device */
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+
+/**
+ * nand_write_page_syndrome - [REPLACEABLE] hardware ECC syndrome based page write
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ *
+ * The hw generator calculates the error syndrome automatically. Therefore we
+ * need a special oob layout and handling.
+ */
+static int nand_write_page_syndrome(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ int i, eccsize = chip->ecc.size;
+ int eccbytes = chip->ecc.bytes;
+ int eccsteps = chip->ecc.steps;
+ const uint8_t *p = buf;
+ uint8_t *oob = chip->oob_poi;
+
+ for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
+
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+ chip->write_buf(mtd, p, eccsize);
+
+ if (chip->ecc.prepad) {
+ chip->write_buf(mtd, oob, chip->ecc.prepad);
+ oob += chip->ecc.prepad;
+ }
+
+ chip->ecc.calculate(mtd, p, oob);
+ chip->write_buf(mtd, oob, eccbytes);
+ oob += eccbytes;
+
+ if (chip->ecc.postpad) {
+ chip->write_buf(mtd, oob, chip->ecc.postpad);
+ oob += chip->ecc.postpad;
+ }
+ }
+
+ /* Calculate remaining oob bytes */
+ i = mtd->oobsize - (oob - chip->oob_poi);
+ if (i)
+ chip->write_buf(mtd, oob, i);
+
+ return 0;
+}
+
+/**
+ * nand_write_page - [REPLACEABLE] write one page
+ * @mtd: MTD device structure
+ * @chip: NAND chip descriptor
+ * @offset: address offset within the page
+ * @data_len: length of actual data to be written
+ * @buf: the data to write
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page number to write
+ * @cached: cached programming
+ * @raw: use _raw version of write_page
+ */
+static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint32_t offset, int data_len, const uint8_t *buf,
+ int oob_required, int page, int cached, int raw)
+{
+ int status, subpage;
+
+ if (!(chip->options & NAND_NO_SUBPAGE_WRITE) &&
+ chip->ecc.write_subpage)
+ subpage = offset || (data_len < mtd->writesize);
+ else
+ subpage = 0;
+
+ chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page);
+
+ if (unlikely(raw))
+ status = chip->ecc.write_page_raw(mtd, chip, buf,
+ oob_required, page);
+ else if (subpage)
+ status = chip->ecc.write_subpage(mtd, chip, offset, data_len,
+ buf, oob_required, page);
+ else
+ status = chip->ecc.write_page(mtd, chip, buf, oob_required,
+ page);
+
+ if (status < 0)
+ return status;
+
+ /*
+ * Cached progamming disabled for now. Not sure if it's worth the
+ * trouble. The speed gain is not very impressive. (2.3->2.6Mib/s).
+ */
+ cached = 0;
+
+ if (!cached || !NAND_HAS_CACHEPROG(chip)) {
+
+ chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ /*
+ * See if operation failed and additional status checks are
+ * available.
+ */
+ if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+ status = chip->errstat(mtd, chip, FL_WRITING, status,
+ page);
+
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+ } else {
+ chip->cmdfunc(mtd, NAND_CMD_CACHEDPROG, -1, -1);
+ status = chip->waitfunc(mtd, chip);
+ }
+
+ return 0;
+}
+
+/**
+ * nand_fill_oob - [INTERN] Transfer client buffer to oob
+ * @mtd: MTD device structure
+ * @oob: oob data buffer
+ * @len: oob data write length
+ * @ops: oob ops structure
+ */
+static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
+ struct mtd_oob_ops *ops)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ /*
+ * Initialise to all 0xFF, to avoid the possibility of left over OOB
+ * data from a previous OOB read.
+ */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+
+ switch (ops->mode) {
+
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_RAW:
+ memcpy(chip->oob_poi + ops->ooboffs, oob, len);
+ return oob + len;
+
+ case MTD_OPS_AUTO_OOB: {
+ struct nand_oobfree *free = chip->ecc.layout->oobfree;
+ uint32_t boffs = 0, woffs = ops->ooboffs;
+ size_t bytes = 0;
+
+ for (; free->length && len; free++, len -= bytes) {
+ /* Write request not from offset 0? */
+ if (unlikely(woffs)) {
+ if (woffs >= free->length) {
+ woffs -= free->length;
+ continue;
+ }
+ boffs = free->offset + woffs;
+ bytes = min_t(size_t, len,
+ (free->length - woffs));
+ woffs = 0;
+ } else {
+ bytes = min_t(size_t, len, free->length);
+ boffs = free->offset;
+ }
+ memcpy(chip->oob_poi + boffs, oob, bytes);
+ oob += bytes;
+ }
+ return oob;
+ }
+ default:
+ BUG();
+ }
+ return NULL;
+}
+
+#define NOTALIGNED(x) ((x & (chip->subpagesize - 1)) != 0)
+
+/**
+ * nand_do_write_ops - [INTERN] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operations description structure
+ *
+ * NAND write with ECC.
+ */
+static int nand_do_write_ops(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ int chipnr, realpage, page, blockmask, column;
+ struct nand_chip *chip = mtd->priv;
+ uint32_t writelen = ops->len;
+
+ uint32_t oobwritelen = ops->ooblen;
+ uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
+ mtd->oobavail : mtd->oobsize;
+
+ uint8_t *oob = ops->oobbuf;
+ uint8_t *buf = ops->datbuf;
+ int ret;
+ int oob_required = oob ? 1 : 0;
+
+ ops->retlen = 0;
+ if (!writelen)
+ return 0;
+
+ /* Reject writes, which are not page aligned */
+ if (NOTALIGNED(to) || NOTALIGNED(ops->len)) {
+ pr_notice("%s: attempt to write non page aligned data\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ column = to & (mtd->writesize - 1);
+
+ chipnr = (int)(to >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ /* Check, if it is write protected */
+ if (nand_check_wp(mtd)) {
+ ret = -EIO;
+ goto err_out;
+ }
+
+ realpage = (int)(to >> chip->page_shift);
+ page = realpage & chip->pagemask;
+ blockmask = (1 << (chip->phys_erase_shift - chip->page_shift)) - 1;
+
+ /* Invalidate the page cache, when we write to the cached page */
+ if (to <= ((loff_t)chip->pagebuf << chip->page_shift) &&
+ ((loff_t)chip->pagebuf << chip->page_shift) < (to + ops->len))
+ chip->pagebuf = -1;
+
+ /* Don't allow multipage oob writes with offset */
+ if (oob && ops->ooboffs && (ops->ooboffs + ops->ooblen > oobmaxlen)) {
+ ret = -EINVAL;
+ goto err_out;
+ }
+
+ while (1) {
+ int bytes = mtd->writesize;
+ int cached = writelen > bytes && page != blockmask;
+ uint8_t *wbuf = buf;
+ int use_bufpoi;
+ int part_pagewr = (column || writelen < mtd->writesize);
+
+ if (part_pagewr)
+ use_bufpoi = 1;
+ else if (chip->options & NAND_USE_BOUNCE_BUFFER)
+ use_bufpoi = !virt_addr_valid(buf);
+ else
+ use_bufpoi = 0;
+
+ /* Partial page write?, or need to use bounce buffer */
+ if (use_bufpoi) {
+ pr_debug("%s: using write bounce buffer for buf@%p\n",
+ __func__, buf);
+ cached = 0;
+ if (part_pagewr)
+ bytes = min_t(int, bytes - column, writelen);
+ chip->pagebuf = -1;
+ memset(chip->buffers->databuf, 0xff, mtd->writesize);
+ memcpy(&chip->buffers->databuf[column], buf, bytes);
+ wbuf = chip->buffers->databuf;
+ }
+
+ if (unlikely(oob)) {
+ size_t len = min(oobwritelen, oobmaxlen);
+ oob = nand_fill_oob(mtd, oob, len, ops);
+ oobwritelen -= len;
+ } else {
+ /* We still need to erase leftover OOB data */
+ memset(chip->oob_poi, 0xff, mtd->oobsize);
+ }
+ ret = chip->write_page(mtd, chip, column, bytes, wbuf,
+ oob_required, page, cached,
+ (ops->mode == MTD_OPS_RAW));
+ if (ret)
+ break;
+
+ writelen -= bytes;
+ if (!writelen)
+ break;
+
+ column = 0;
+ buf += bytes;
+ realpage++;
+
+ page = realpage & chip->pagemask;
+ /* Check, if we cross a chip boundary */
+ if (!page) {
+ chipnr++;
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
+ }
+ }
+
+ ops->retlen = ops->len - writelen;
+ if (unlikely(oob))
+ ops->oobretlen = ops->ooblen;
+
+err_out:
+ chip->select_chip(mtd, -1);
+ return ret;
+}
+
+/**
+ * panic_nand_write - [MTD Interface] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
+ *
+ * NAND write with ECC. Used when performing writes in interrupt context, this
+ * may for example be called by mtdoops when writing an oops while in panic.
+ */
+static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const uint8_t *buf)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct mtd_oob_ops ops;
+ int ret;
+
+ /* Wait for the device to get ready */
+ panic_nand_wait(mtd, chip, 400);
+
+ /* Grab the device */
+ panic_nand_get_device(chip, mtd, FL_WRITING);
+
+ memset(&ops, 0, sizeof(ops));
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.mode = MTD_OPS_PLACE_OOB;
+
+ ret = nand_do_write_ops(mtd, to, &ops);
+
+ *retlen = ops.retlen;
+ return ret;
+}
+
+/**
+ * nand_write - [MTD Interface] NAND write with ECC
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @len: number of bytes to write
+ * @retlen: pointer to variable to store the number of written bytes
+ * @buf: the data to write
+ *
+ * NAND write with ECC.
+ */
+static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
+ size_t *retlen, const uint8_t *buf)
+{
+ struct mtd_oob_ops ops;
+ int ret;
+
+ nand_get_device(mtd, FL_WRITING);
+ memset(&ops, 0, sizeof(ops));
+ ops.len = len;
+ ops.datbuf = (uint8_t *)buf;
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ret = nand_do_write_ops(mtd, to, &ops);
+ *retlen = ops.retlen;
+ nand_release_device(mtd);
+ return ret;
+}
+
+/**
+ * nand_do_write_oob - [MTD Interface] NAND write out-of-band
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
+ *
+ * NAND write out-of-band.
+ */
+static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ int chipnr, page, status, len;
+ struct nand_chip *chip = mtd->priv;
+
+ pr_debug("%s: to = 0x%08x, len = %i\n",
+ __func__, (unsigned int)to, (int)ops->ooblen);
+
+ if (ops->mode == MTD_OPS_AUTO_OOB)
+ len = chip->ecc.layout->oobavail;
+ else
+ len = mtd->oobsize;
+
+ /* Do not allow write past end of page */
+ if ((ops->ooboffs + ops->ooblen) > len) {
+ pr_debug("%s: attempt to write past end of page\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ if (unlikely(ops->ooboffs >= len)) {
+ pr_debug("%s: attempt to start write outside oob\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ /* Do not allow write past end of device */
+ if (unlikely(to >= mtd->size ||
+ ops->ooboffs + ops->ooblen >
+ ((mtd->size >> chip->page_shift) -
+ (to >> chip->page_shift)) * len)) {
+ pr_debug("%s: attempt to write beyond end of device\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ chipnr = (int)(to >> chip->chip_shift);
+ chip->select_chip(mtd, chipnr);
+
+ /* Shift to get page */
+ page = (int)(to >> chip->page_shift);
+
+ /*
+ * Reset the chip. Some chips (like the Toshiba TC5832DC found in one
+ * of my DiskOnChip 2000 test units) will clear the whole data page too
+ * if we don't do this. I have no clue why, but I seem to have 'fixed'
+ * it in the doc2000 driver in August 1999. dwmw2.
+ */
+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+ /* Check, if it is write protected */
+ if (nand_check_wp(mtd)) {
+ chip->select_chip(mtd, -1);
+ return -EROFS;
+ }
+
+ /* Invalidate the page cache, if we write to the cached page */
+ if (page == chip->pagebuf)
+ chip->pagebuf = -1;
+
+ nand_fill_oob(mtd, ops->oobbuf, ops->ooblen, ops);
+
+ if (ops->mode == MTD_OPS_RAW)
+ status = chip->ecc.write_oob_raw(mtd, chip, page & chip->pagemask);
+ else
+ status = chip->ecc.write_oob(mtd, chip, page & chip->pagemask);
+
+ chip->select_chip(mtd, -1);
+
+ if (status)
+ return status;
+
+ ops->oobretlen = ops->ooblen;
+
+ return 0;
+}
+
+/**
+ * nand_write_oob - [MTD Interface] NAND write data and/or out-of-band
+ * @mtd: MTD device structure
+ * @to: offset to write to
+ * @ops: oob operation description structure
+ */
+static int nand_write_oob(struct mtd_info *mtd, loff_t to,
+ struct mtd_oob_ops *ops)
+{
+ int ret = -ENOTSUPP;
+
+ ops->retlen = 0;
+
+ /* Do not allow writes past end of device */
+ if (ops->datbuf && (to + ops->len) > mtd->size) {
+ pr_debug("%s: attempt to write beyond end of device\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ nand_get_device(mtd, FL_WRITING);
+
+ switch (ops->mode) {
+ case MTD_OPS_PLACE_OOB:
+ case MTD_OPS_AUTO_OOB:
+ case MTD_OPS_RAW:
+ break;
+
+ default:
+ goto out;
+ }
+
+ if (!ops->datbuf)
+ ret = nand_do_write_oob(mtd, to, ops);
+ else
+ ret = nand_do_write_ops(mtd, to, ops);
+
+out:
+ nand_release_device(mtd);
+ return ret;
+}
+
+/**
+ * single_erase - [GENERIC] NAND standard block erase command function
+ * @mtd: MTD device structure
+ * @page: the page address of the block which will be erased
+ *
+ * Standard erase command for NAND chips. Returns NAND status.
+ */
+static int single_erase(struct mtd_info *mtd, int page)
+{
+ struct nand_chip *chip = mtd->priv;
+ /* Send commands to erase a block */
+ chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
+ chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
+
+ return chip->waitfunc(mtd, chip);
+}
+
+/**
+ * nand_erase - [MTD Interface] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ *
+ * Erase one ore more blocks.
+ */
+static int nand_erase(struct mtd_info *mtd, struct erase_info *instr)
+{
+ return nand_erase_nand(mtd, instr, 0);
+}
+
+/**
+ * nand_erase_nand - [INTERN] erase block(s)
+ * @mtd: MTD device structure
+ * @instr: erase instruction
+ * @allowbbt: allow erasing the bbt area
+ *
+ * Erase one ore more blocks.
+ */
+int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
+ int allowbbt)
+{
+ int page, status, pages_per_block, ret, chipnr;
+ struct nand_chip *chip = mtd->priv;
+ loff_t len;
+
+ pr_debug("%s: start = 0x%012llx, len = %llu\n",
+ __func__, (unsigned long long)instr->addr,
+ (unsigned long long)instr->len);
+
+ if (check_offs_len(mtd, instr->addr, instr->len))
+ return -EINVAL;
+
+ /* Grab the lock and see if the device is available */
+ nand_get_device(mtd, FL_ERASING);
+
+ /* Shift to get first page */
+ page = (int)(instr->addr >> chip->page_shift);
+ chipnr = (int)(instr->addr >> chip->chip_shift);
+
+ /* Calculate pages in each block */
+ pages_per_block = 1 << (chip->phys_erase_shift - chip->page_shift);
+
+ /* Select the NAND device */
+ chip->select_chip(mtd, chipnr);
+
+ /* Check, if it is write protected */
+ if (nand_check_wp(mtd)) {
+ pr_debug("%s: device is write protected!\n",
+ __func__);
+ instr->state = MTD_ERASE_FAILED;
+ goto erase_exit;
+ }
+
+ /* Loop through the pages */
+ len = instr->len;
+
+ instr->state = MTD_ERASING;
+
+ while (len) {
+ /* Check if we have a bad block, we do not erase bad blocks! */
+ if (nand_block_checkbad(mtd, ((loff_t) page) <<
+ chip->page_shift, 0, allowbbt)) {
+ pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
+ __func__, page);
+ instr->state = MTD_ERASE_FAILED;
+ goto erase_exit;
+ }
+
+ /*
+ * Invalidate the page cache, if we erase the block which
+ * contains the current cached page.
+ */
+ if (page <= chip->pagebuf && chip->pagebuf <
+ (page + pages_per_block))
+ chip->pagebuf = -1;
+
+ status = chip->erase(mtd, page & chip->pagemask);
+
+ /*
+ * See if operation failed and additional status checks are
+ * available
+ */
+ if ((status & NAND_STATUS_FAIL) && (chip->errstat))
+ status = chip->errstat(mtd, chip, FL_ERASING,
+ status, page);
+
+ /* See if block erase succeeded */
+ if (status & NAND_STATUS_FAIL) {
+ pr_debug("%s: failed erase, page 0x%08x\n",
+ __func__, page);
+ instr->state = MTD_ERASE_FAILED;
+ instr->fail_addr =
+ ((loff_t)page << chip->page_shift);
+ goto erase_exit;
+ }
+
+ /* Increment page address and decrement length */
+ len -= (1ULL << chip->phys_erase_shift);
+ page += pages_per_block;
+
+ /* Check, if we cross a chip boundary */
+ if (len && !(page & chip->pagemask)) {
+ chipnr++;
+ chip->select_chip(mtd, -1);
+ chip->select_chip(mtd, chipnr);
+ }
+ }
+ instr->state = MTD_ERASE_DONE;
+
+erase_exit:
+
+ ret = instr->state == MTD_ERASE_DONE ? 0 : -EIO;
+
+ /* Deselect and wake up anyone waiting on the device */
+ chip->select_chip(mtd, -1);
+ nand_release_device(mtd);
+
+ /* Do call back function */
+ if (!ret)
+ mtd_erase_callback(instr);
+
+ /* Return more or less happy */
+ return ret;
+}
+
+/**
+ * nand_sync - [MTD Interface] sync
+ * @mtd: MTD device structure
+ *
+ * Sync is actually a wait for chip ready function.
+ */
+static void nand_sync(struct mtd_info *mtd)
+{
+ pr_debug("%s: called\n", __func__);
+
+ /* Grab the lock and see if the device is available */
+ nand_get_device(mtd, FL_SYNCING);
+ /* Release it and go back */
+ nand_release_device(mtd);
+}
+
+/**
+ * nand_block_isbad - [MTD Interface] Check if block at offset is bad
+ * @mtd: MTD device structure
+ * @offs: offset relative to mtd start
+ */
+static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
+{
+ return nand_block_checkbad(mtd, offs, 1, 0);
+}
+
+/**
+ * nand_block_markbad - [MTD Interface] Mark block at the given offset as bad
+ * @mtd: MTD device structure
+ * @ofs: offset relative to mtd start
+ */
+static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ int ret;
+
+ ret = nand_block_isbad(mtd, ofs);
+ if (ret) {
+ /* If it was bad already, return success and do nothing */
+ if (ret > 0)
+ return 0;
+ return ret;
+ }
+
+ return nand_block_markbad_lowlevel(mtd, ofs);
+}
+
+/**
+ * nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand
+ * @mtd: MTD device structure
+ * @chip: nand chip info structure
+ * @addr: feature address.
+ * @subfeature_param: the subfeature parameters, a four bytes array.
+ */
+static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip,
+ int addr, uint8_t *subfeature_param)
+{
+ int status;
+ int i;
+
+ if (!chip->onfi_version ||
+ !(le16_to_cpu(chip->onfi_params.opt_cmd)
+ & ONFI_OPT_CMD_SET_GET_FEATURES))
+ return -EINVAL;
+
+ chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1);
+ for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
+ chip->write_byte(mtd, subfeature_param[i]);
+
+ status = chip->waitfunc(mtd, chip);
+ if (status & NAND_STATUS_FAIL)
+ return -EIO;
+ return 0;
+}
+
+/**
+ * nand_onfi_get_features- [REPLACEABLE] get features for ONFI nand
+ * @mtd: MTD device structure
+ * @chip: nand chip info structure
+ * @addr: feature address.
+ * @subfeature_param: the subfeature parameters, a four bytes array.
+ */
+static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip,
+ int addr, uint8_t *subfeature_param)
+{
+ int i;
+
+ if (!chip->onfi_version ||
+ !(le16_to_cpu(chip->onfi_params.opt_cmd)
+ & ONFI_OPT_CMD_SET_GET_FEATURES))
+ return -EINVAL;
+
+ chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1);
+ for (i = 0; i < ONFI_SUBFEATURE_PARAM_LEN; ++i)
+ *subfeature_param++ = chip->read_byte(mtd);
+ return 0;
+}
+
+/**
+ * nand_suspend - [MTD Interface] Suspend the NAND flash
+ * @mtd: MTD device structure
+ */
+static int nand_suspend(struct mtd_info *mtd)
+{
+ return nand_get_device(mtd, FL_PM_SUSPENDED);
+}
+
+/**
+ * nand_resume - [MTD Interface] Resume the NAND flash
+ * @mtd: MTD device structure
+ */
+static void nand_resume(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (chip->state == FL_PM_SUSPENDED)
+ nand_release_device(mtd);
+ else
+ pr_err("%s called for a chip which is not in suspended state\n",
+ __func__);
+}
+
+/**
+ * nand_shutdown - [MTD Interface] Finish the current NAND operation and
+ * prevent further operations
+ * @mtd: MTD device structure
+ */
+static void nand_shutdown(struct mtd_info *mtd)
+{
+ nand_get_device(mtd, FL_PM_SUSPENDED);
+}
+
+/* Set default functions */
+static void nand_set_defaults(struct nand_chip *chip, int busw)
+{
+ /* check for proper chip_delay setup, set 20us if not */
+ if (!chip->chip_delay)
+ chip->chip_delay = 20;
+
+ /* check, if a user supplied command function given */
+ if (chip->cmdfunc == NULL)
+ chip->cmdfunc = nand_command;
+
+ /* check, if a user supplied wait function given */
+ if (chip->waitfunc == NULL)
+ chip->waitfunc = nand_wait;
+
+ if (!chip->select_chip)
+ chip->select_chip = nand_select_chip;
+
+ /* set for ONFI nand */
+ if (!chip->onfi_set_features)
+ chip->onfi_set_features = nand_onfi_set_features;
+ if (!chip->onfi_get_features)
+ chip->onfi_get_features = nand_onfi_get_features;
+
+ /* If called twice, pointers that depend on busw may need to be reset */
+ if (!chip->read_byte || chip->read_byte == nand_read_byte)
+ chip->read_byte = busw ? nand_read_byte16 : nand_read_byte;
+ if (!chip->read_word)
+ chip->read_word = nand_read_word;
+ if (!chip->block_bad)
+ chip->block_bad = nand_block_bad;
+ if (!chip->block_markbad)
+ chip->block_markbad = nand_default_block_markbad;
+ if (!chip->write_buf || chip->write_buf == nand_write_buf)
+ chip->write_buf = busw ? nand_write_buf16 : nand_write_buf;
+ if (!chip->write_byte || chip->write_byte == nand_write_byte)
+ chip->write_byte = busw ? nand_write_byte16 : nand_write_byte;
+ if (!chip->read_buf || chip->read_buf == nand_read_buf)
+ chip->read_buf = busw ? nand_read_buf16 : nand_read_buf;
+ if (!chip->scan_bbt)
+ chip->scan_bbt = nand_default_bbt;
+
+ if (!chip->controller) {
+ chip->controller = &chip->hwcontrol;
+ spin_lock_init(&chip->controller->lock);
+ init_waitqueue_head(&chip->controller->wq);
+ }
+
+}
+
+/* Sanitize ONFI strings so we can safely print them */
+static void sanitize_string(uint8_t *s, size_t len)
+{
+ ssize_t i;
+
+ /* Null terminate */
+ s[len - 1] = 0;
+
+ /* Remove non printable chars */
+ for (i = 0; i < len - 1; i++) {
+ if (s[i] < ' ' || s[i] > 127)
+ s[i] = '?';
+ }
+
+ /* Remove trailing spaces */
+ strim(s);
+}
+
+static u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
+{
+ int i;
+ while (len--) {
+ crc ^= *p++ << 8;
+ for (i = 0; i < 8; i++)
+ crc = (crc << 1) ^ ((crc & 0x8000) ? 0x8005 : 0);
+ }
+
+ return crc;
+}
+
+/* Parse the Extended Parameter Page. */
+static int nand_flash_detect_ext_param_page(struct mtd_info *mtd,
+ struct nand_chip *chip, struct nand_onfi_params *p)
+{
+ struct onfi_ext_param_page *ep;
+ struct onfi_ext_section *s;
+ struct onfi_ext_ecc_info *ecc;
+ uint8_t *cursor;
+ int ret = -EINVAL;
+ int len;
+ int i;
+
+ len = le16_to_cpu(p->ext_param_page_length) * 16;
+ ep = kmalloc(len, GFP_KERNEL);
+ if (!ep)
+ return -ENOMEM;
+
+ /* Send our own NAND_CMD_PARAM. */
+ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+
+ /* Use the Change Read Column command to skip the ONFI param pages. */
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
+ sizeof(*p) * p->num_of_param_pages , -1);
+
+ /* Read out the Extended Parameter Page. */
+ chip->read_buf(mtd, (uint8_t *)ep, len);
+ if ((onfi_crc16(ONFI_CRC_BASE, ((uint8_t *)ep) + 2, len - 2)
+ != le16_to_cpu(ep->crc))) {
+ pr_debug("fail in the CRC.\n");
+ goto ext_out;
+ }
+
+ /*
+ * Check the signature.
+ * Do not strictly follow the ONFI spec, maybe changed in future.
+ */
+ if (strncmp(ep->sig, "EPPS", 4)) {
+ pr_debug("The signature is invalid.\n");
+ goto ext_out;
+ }
+
+ /* find the ECC section. */
+ cursor = (uint8_t *)(ep + 1);
+ for (i = 0; i < ONFI_EXT_SECTION_MAX; i++) {
+ s = ep->sections + i;
+ if (s->type == ONFI_SECTION_TYPE_2)
+ break;
+ cursor += s->length * 16;
+ }
+ if (i == ONFI_EXT_SECTION_MAX) {
+ pr_debug("We can not find the ECC section.\n");
+ goto ext_out;
+ }
+
+ /* get the info we want. */
+ ecc = (struct onfi_ext_ecc_info *)cursor;
+
+ if (!ecc->codeword_size) {
+ pr_debug("Invalid codeword size\n");
+ goto ext_out;
+ }
+
+ chip->ecc_strength_ds = ecc->ecc_bits;
+ chip->ecc_step_ds = 1 << ecc->codeword_size;
+ ret = 0;
+
+ext_out:
+ kfree(ep);
+ return ret;
+}
+
+static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode)
+{
+ struct nand_chip *chip = mtd->priv;
+ uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode};
+
+ return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY,
+ feature);
+}
+
+/*
+ * Configure chip properties from Micron vendor-specific ONFI table
+ */
+static void nand_onfi_detect_micron(struct nand_chip *chip,
+ struct nand_onfi_params *p)
+{
+ struct nand_onfi_vendor_micron *micron = (void *)p->vendor;
+
+ if (le16_to_cpu(p->vendor_revision) < 1)
+ return;
+
+ chip->read_retries = micron->read_retry_options;
+ chip->setup_read_retry = nand_setup_read_retry_micron;
+}
+
+/*
+ * Check if the NAND chip is ONFI compliant, returns 1 if it is, 0 otherwise.
+ */
+static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip,
+ int *busw)
+{
+ struct nand_onfi_params *p = &chip->onfi_params;
+ int i, j;
+ int val;
+
+ /* Try ONFI for unknown chip or LP */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x20, -1);
+ if (chip->read_byte(mtd) != 'O' || chip->read_byte(mtd) != 'N' ||
+ chip->read_byte(mtd) != 'F' || chip->read_byte(mtd) != 'I')
+ return 0;
+
+ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0, -1);
+ for (i = 0; i < 3; i++) {
+ for (j = 0; j < sizeof(*p); j++)
+ ((uint8_t *)p)[j] = chip->read_byte(mtd);
+ if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 254) ==
+ le16_to_cpu(p->crc)) {
+ break;
+ }
+ }
+
+ if (i == 3) {
+ pr_err("Could not find valid ONFI parameter page; aborting\n");
+ return 0;
+ }
+
+ /* Check version */
+ val = le16_to_cpu(p->revision);
+ if (val & (1 << 5))
+ chip->onfi_version = 23;
+ else if (val & (1 << 4))
+ chip->onfi_version = 22;
+ else if (val & (1 << 3))
+ chip->onfi_version = 21;
+ else if (val & (1 << 2))
+ chip->onfi_version = 20;
+ else if (val & (1 << 1))
+ chip->onfi_version = 10;
+
+ if (!chip->onfi_version) {
+ pr_info("unsupported ONFI version: %d\n", val);
+ return 0;
+ }
+
+ sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+ sanitize_string(p->model, sizeof(p->model));
+ if (!mtd->name)
+ mtd->name = p->model;
+
+ mtd->writesize = le32_to_cpu(p->byte_per_page);
+
+ /*
+ * pages_per_block and blocks_per_lun may not be a power-of-2 size
+ * (don't ask me who thought of this...). MTD assumes that these
+ * dimensions will be power-of-2, so just truncate the remaining area.
+ */
+ mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+ mtd->erasesize *= mtd->writesize;
+
+ mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+
+ /* See erasesize comment */
+ chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+ chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+ chip->bits_per_cell = p->bits_per_cell;
+
+ if (onfi_feature(chip) & ONFI_FEATURE_16_BIT_BUS)
+ *busw = NAND_BUSWIDTH_16;
+ else
+ *busw = 0;
+
+ if (p->ecc_bits != 0xff) {
+ chip->ecc_strength_ds = p->ecc_bits;
+ chip->ecc_step_ds = 512;
+ } else if (chip->onfi_version >= 21 &&
+ (onfi_feature(chip) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
+
+ /*
+ * The nand_flash_detect_ext_param_page() uses the
+ * Change Read Column command which maybe not supported
+ * by the chip->cmdfunc. So try to update the chip->cmdfunc
+ * now. We do not replace user supplied command function.
+ */
+ if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
+ chip->cmdfunc = nand_command_lp;
+
+ /* The Extended Parameter Page is supported since ONFI 2.1. */
+ if (nand_flash_detect_ext_param_page(mtd, chip, p))
+ pr_warn("Failed to detect ONFI extended param page\n");
+ } else {
+ pr_warn("Could not retrieve ONFI ECC requirements\n");
+ }
+
+ if (p->jedec_id == NAND_MFR_MICRON)
+ nand_onfi_detect_micron(chip, p);
+
+ return 1;
+}
+
+/*
+ * Check if the NAND chip is JEDEC compliant, returns 1 if it is, 0 otherwise.
+ */
+static int nand_flash_detect_jedec(struct mtd_info *mtd, struct nand_chip *chip,
+ int *busw)
+{
+ struct nand_jedec_params *p = &chip->jedec_params;
+ struct jedec_ecc_info *ecc;
+ int val;
+ int i, j;
+
+ /* Try JEDEC for unknown chip or LP */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x40, -1);
+ if (chip->read_byte(mtd) != 'J' || chip->read_byte(mtd) != 'E' ||
+ chip->read_byte(mtd) != 'D' || chip->read_byte(mtd) != 'E' ||
+ chip->read_byte(mtd) != 'C')
+ return 0;
+
+ chip->cmdfunc(mtd, NAND_CMD_PARAM, 0x40, -1);
+ for (i = 0; i < 3; i++) {
+ for (j = 0; j < sizeof(*p); j++)
+ ((uint8_t *)p)[j] = chip->read_byte(mtd);
+
+ if (onfi_crc16(ONFI_CRC_BASE, (uint8_t *)p, 510) ==
+ le16_to_cpu(p->crc))
+ break;
+ }
+
+ if (i == 3) {
+ pr_err("Could not find valid JEDEC parameter page; aborting\n");
+ return 0;
+ }
+
+ /* Check version */
+ val = le16_to_cpu(p->revision);
+ if (val & (1 << 2))
+ chip->jedec_version = 10;
+ else if (val & (1 << 1))
+ chip->jedec_version = 1; /* vendor specific version */
+
+ if (!chip->jedec_version) {
+ pr_info("unsupported JEDEC version: %d\n", val);
+ return 0;
+ }
+
+ sanitize_string(p->manufacturer, sizeof(p->manufacturer));
+ sanitize_string(p->model, sizeof(p->model));
+ if (!mtd->name)
+ mtd->name = p->model;
+
+ mtd->writesize = le32_to_cpu(p->byte_per_page);
+
+ /* Please reference to the comment for nand_flash_detect_onfi. */
+ mtd->erasesize = 1 << (fls(le32_to_cpu(p->pages_per_block)) - 1);
+ mtd->erasesize *= mtd->writesize;
+
+ mtd->oobsize = le16_to_cpu(p->spare_bytes_per_page);
+
+ /* Please reference to the comment for nand_flash_detect_onfi. */
+ chip->chipsize = 1 << (fls(le32_to_cpu(p->blocks_per_lun)) - 1);
+ chip->chipsize *= (uint64_t)mtd->erasesize * p->lun_count;
+ chip->bits_per_cell = p->bits_per_cell;
+
+ if (jedec_feature(chip) & JEDEC_FEATURE_16_BIT_BUS)
+ *busw = NAND_BUSWIDTH_16;
+ else
+ *busw = 0;
+
+ /* ECC info */
+ ecc = &p->ecc_info[0];
+
+ if (ecc->codeword_size >= 9) {
+ chip->ecc_strength_ds = ecc->ecc_bits;
+ chip->ecc_step_ds = 1 << ecc->codeword_size;
+ } else {
+ pr_warn("Invalid codeword size\n");
+ }
+
+ return 1;
+}
+
+/*
+ * nand_id_has_period - Check if an ID string has a given wraparound period
+ * @id_data: the ID string
+ * @arrlen: the length of the @id_data array
+ * @period: the period of repitition
+ *
+ * Check if an ID string is repeated within a given sequence of bytes at
+ * specific repetition interval period (e.g., {0x20,0x01,0x7F,0x20} has a
+ * period of 3). This is a helper function for nand_id_len(). Returns non-zero
+ * if the repetition has a period of @period; otherwise, returns zero.
+ */
+static int nand_id_has_period(u8 *id_data, int arrlen, int period)
+{
+ int i, j;
+ for (i = 0; i < period; i++)
+ for (j = i + period; j < arrlen; j += period)
+ if (id_data[i] != id_data[j])
+ return 0;
+ return 1;
+}
+
+/*
+ * nand_id_len - Get the length of an ID string returned by CMD_READID
+ * @id_data: the ID string
+ * @arrlen: the length of the @id_data array
+
+ * Returns the length of the ID string, according to known wraparound/trailing
+ * zero patterns. If no pattern exists, returns the length of the array.
+ */
+static int nand_id_len(u8 *id_data, int arrlen)
+{
+ int last_nonzero, period;
+
+ /* Find last non-zero byte */
+ for (last_nonzero = arrlen - 1; last_nonzero >= 0; last_nonzero--)
+ if (id_data[last_nonzero])
+ break;
+
+ /* All zeros */
+ if (last_nonzero < 0)
+ return 0;
+
+ /* Calculate wraparound period */
+ for (period = 1; period < arrlen; period++)
+ if (nand_id_has_period(id_data, arrlen, period))
+ break;
+
+ /* There's a repeated pattern */
+ if (period < arrlen)
+ return period;
+
+ /* There are trailing zeros */
+ if (last_nonzero < arrlen - 1)
+ return last_nonzero + 1;
+
+ /* No pattern detected */
+ return arrlen;
+}
+
+/* Extract the bits of per cell from the 3rd byte of the extended ID */
+static int nand_get_bits_per_cell(u8 cellinfo)
+{
+ int bits;
+
+ bits = cellinfo & NAND_CI_CELLTYPE_MSK;
+ bits >>= NAND_CI_CELLTYPE_SHIFT;
+ return bits + 1;
+}
+
+/*
+ * Many new NAND share similar device ID codes, which represent the size of the
+ * chip. The rest of the parameters must be decoded according to generic or
+ * manufacturer-specific "extended ID" decoding patterns.
+ */
+static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip,
+ u8 id_data[8], int *busw)
+{
+ int extid, id_len;
+ /* The 3rd id byte holds MLC / multichip data */
+ chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
+ /* The 4th id byte is the important one */
+ extid = id_data[3];
+
+ id_len = nand_id_len(id_data, 8);
+
+ /*
+ * Field definitions are in the following datasheets:
+ * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32)
+ * New Samsung (6 byte ID): Samsung K9GAG08U0F (p.44)
+ * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22)
+ *
+ * Check for ID length, non-zero 6th byte, cell type, and Hynix/Samsung
+ * ID to decide what to do.
+ */
+ if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG &&
+ !nand_is_slc(chip) && id_data[5] != 0x00) {
+ /* Calc pagesize */
+ mtd->writesize = 2048 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ switch (((extid >> 2) & 0x04) | (extid & 0x03)) {
+ case 1:
+ mtd->oobsize = 128;
+ break;
+ case 2:
+ mtd->oobsize = 218;
+ break;
+ case 3:
+ mtd->oobsize = 400;
+ break;
+ case 4:
+ mtd->oobsize = 436;
+ break;
+ case 5:
+ mtd->oobsize = 512;
+ break;
+ case 6:
+ mtd->oobsize = 640;
+ break;
+ case 7:
+ default: /* Other cases are "reserved" (unknown) */
+ mtd->oobsize = 1024;
+ break;
+ }
+ extid >>= 2;
+ /* Calc blocksize */
+ mtd->erasesize = (128 * 1024) <<
+ (((extid >> 1) & 0x04) | (extid & 0x03));
+ *busw = 0;
+ } else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
+ !nand_is_slc(chip)) {
+ unsigned int tmp;
+
+ /* Calc pagesize */
+ mtd->writesize = 2048 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ switch (((extid >> 2) & 0x04) | (extid & 0x03)) {
+ case 0:
+ mtd->oobsize = 128;
+ break;
+ case 1:
+ mtd->oobsize = 224;
+ break;
+ case 2:
+ mtd->oobsize = 448;
+ break;
+ case 3:
+ mtd->oobsize = 64;
+ break;
+ case 4:
+ mtd->oobsize = 32;
+ break;
+ case 5:
+ mtd->oobsize = 16;
+ break;
+ default:
+ mtd->oobsize = 640;
+ break;
+ }
+ extid >>= 2;
+ /* Calc blocksize */
+ tmp = ((extid >> 1) & 0x04) | (extid & 0x03);
+ if (tmp < 0x03)
+ mtd->erasesize = (128 * 1024) << tmp;
+ else if (tmp == 0x03)
+ mtd->erasesize = 768 * 1024;
+ else
+ mtd->erasesize = (64 * 1024) << tmp;
+ *busw = 0;
+ } else {
+ /* Calc pagesize */
+ mtd->writesize = 1024 << (extid & 0x03);
+ extid >>= 2;
+ /* Calc oobsize */
+ mtd->oobsize = (8 << (extid & 0x01)) *
+ (mtd->writesize >> 9);
+ extid >>= 2;
+ /* Calc blocksize. Blocksize is multiples of 64KiB */
+ mtd->erasesize = (64 * 1024) << (extid & 0x03);
+ extid >>= 2;
+ /* Get buswidth information */
+ *busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0;
+
+ /*
+ * Toshiba 24nm raw SLC (i.e., not BENAND) have 32B OOB per
+ * 512B page. For Toshiba SLC, we decode the 5th/6th byte as
+ * follows:
+ * - ID byte 6, bits[2:0]: 100b -> 43nm, 101b -> 32nm,
+ * 110b -> 24nm
+ * - ID byte 5, bit[7]: 1 -> BENAND, 0 -> raw SLC
+ */
+ if (id_len >= 6 && id_data[0] == NAND_MFR_TOSHIBA &&
+ nand_is_slc(chip) &&
+ (id_data[5] & 0x7) == 0x6 /* 24nm */ &&
+ !(id_data[4] & 0x80) /* !BENAND */) {
+ mtd->oobsize = 32 * mtd->writesize >> 9;
+ }
+
+ }
+}
+
+/*
+ * Old devices have chip data hardcoded in the device ID table. nand_decode_id
+ * decodes a matching ID table entry and assigns the MTD size parameters for
+ * the chip.
+ */
+static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip,
+ struct nand_flash_dev *type, u8 id_data[8],
+ int *busw)
+{
+ int maf_id = id_data[0];
+
+ mtd->erasesize = type->erasesize;
+ mtd->writesize = type->pagesize;
+ mtd->oobsize = mtd->writesize / 32;
+ *busw = type->options & NAND_BUSWIDTH_16;
+
+ /* All legacy ID NAND are small-page, SLC */
+ chip->bits_per_cell = 1;
+
+ /*
+ * Check for Spansion/AMD ID + repeating 5th, 6th byte since
+ * some Spansion chips have erasesize that conflicts with size
+ * listed in nand_ids table.
+ * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39)
+ */
+ if (maf_id == NAND_MFR_AMD && id_data[4] != 0x00 && id_data[5] == 0x00
+ && id_data[6] == 0x00 && id_data[7] == 0x00
+ && mtd->writesize == 512) {
+ mtd->erasesize = 128 * 1024;
+ mtd->erasesize <<= ((id_data[3] & 0x03) << 1);
+ }
+}
+
+/*
+ * Set the bad block marker/indicator (BBM/BBI) patterns according to some
+ * heuristic patterns using various detected parameters (e.g., manufacturer,
+ * page size, cell-type information).
+ */
+static void nand_decode_bbm_options(struct mtd_info *mtd,
+ struct nand_chip *chip, u8 id_data[8])
+{
+ int maf_id = id_data[0];
+
+ /* Set the bad block position */
+ if (mtd->writesize > 512 || (chip->options & NAND_BUSWIDTH_16))
+ chip->badblockpos = NAND_LARGE_BADBLOCK_POS;
+ else
+ chip->badblockpos = NAND_SMALL_BADBLOCK_POS;
+
+ /*
+ * Bad block marker is stored in the last page of each block on Samsung
+ * and Hynix MLC devices; stored in first two pages of each block on
+ * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba,
+ * AMD/Spansion, and Macronix. All others scan only the first page.
+ */
+ if (!nand_is_slc(chip) &&
+ (maf_id == NAND_MFR_SAMSUNG ||
+ maf_id == NAND_MFR_HYNIX))
+ chip->bbt_options |= NAND_BBT_SCANLASTPAGE;
+ else if ((nand_is_slc(chip) &&
+ (maf_id == NAND_MFR_SAMSUNG ||
+ maf_id == NAND_MFR_HYNIX ||
+ maf_id == NAND_MFR_TOSHIBA ||
+ maf_id == NAND_MFR_AMD ||
+ maf_id == NAND_MFR_MACRONIX)) ||
+ (mtd->writesize == 2048 &&
+ maf_id == NAND_MFR_MICRON))
+ chip->bbt_options |= NAND_BBT_SCAN2NDPAGE;
+}
+
+static inline bool is_full_id_nand(struct nand_flash_dev *type)
+{
+ return type->id_len;
+}
+
+static bool find_full_id_nand(struct mtd_info *mtd, struct nand_chip *chip,
+ struct nand_flash_dev *type, u8 *id_data, int *busw)
+{
+ if (!strncmp(type->id, id_data, type->id_len)) {
+ mtd->writesize = type->pagesize;
+ mtd->erasesize = type->erasesize;
+ mtd->oobsize = type->oobsize;
+
+ chip->bits_per_cell = nand_get_bits_per_cell(id_data[2]);
+ chip->chipsize = (uint64_t)type->chipsize << 20;
+ chip->options |= type->options;
+ chip->ecc_strength_ds = NAND_ECC_STRENGTH(type);
+ chip->ecc_step_ds = NAND_ECC_STEP(type);
+ chip->onfi_timing_mode_default =
+ type->onfi_timing_mode_default;
+
+ *busw = type->options & NAND_BUSWIDTH_16;
+
+ if (!mtd->name)
+ mtd->name = type->name;
+
+ return true;
+ }
+ return false;
+}
+
+/*
+ * Get the flash and manufacturer id and lookup if the type is supported.
+ */
+static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ int *maf_id, int *dev_id,
+ struct nand_flash_dev *type)
+{
+ int busw;
+ int i, maf_idx;
+ u8 id_data[8];
+
+ /* Select the device */
+ chip->select_chip(mtd, 0);
+
+ /*
+ * Reset the chip, required by some chips (e.g. Micron MT29FxGxxxxx)
+ * after power-up.
+ */
+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+
+ /* Send the command for reading device ID */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+ /* Read manufacturer and device IDs */
+ *maf_id = chip->read_byte(mtd);
+ *dev_id = chip->read_byte(mtd);
+
+ /*
+ * Try again to make sure, as some systems the bus-hold or other
+ * interface concerns can cause random data which looks like a
+ * possibly credible NAND flash to appear. If the two results do
+ * not match, ignore the device completely.
+ */
+
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+
+ /* Read entire ID string */
+ for (i = 0; i < 8; i++)
+ id_data[i] = chip->read_byte(mtd);
+
+ if (id_data[0] != *maf_id || id_data[1] != *dev_id) {
+ pr_info("second ID read did not match %02x,%02x against %02x,%02x\n",
+ *maf_id, *dev_id, id_data[0], id_data[1]);
+ return ERR_PTR(-ENODEV);
+ }
+
+ if (!type)
+ type = nand_flash_ids;
+
+ for (; type->name != NULL; type++) {
+ if (is_full_id_nand(type)) {
+ if (find_full_id_nand(mtd, chip, type, id_data, &busw))
+ goto ident_done;
+ } else if (*dev_id == type->dev_id) {
+ break;
+ }
+ }
+
+ chip->onfi_version = 0;
+ if (!type->name || !type->pagesize) {
+ /* Check if the chip is ONFI compliant */
+ if (nand_flash_detect_onfi(mtd, chip, &busw))
+ goto ident_done;
+
+ /* Check if the chip is JEDEC compliant */
+ if (nand_flash_detect_jedec(mtd, chip, &busw))
+ goto ident_done;
+ }
+
+ if (!type->name)
+ return ERR_PTR(-ENODEV);
+
+ if (!mtd->name)
+ mtd->name = type->name;
+
+ chip->chipsize = (uint64_t)type->chipsize << 20;
+
+ if (!type->pagesize) {
+ /* Decode parameters from extended ID */
+ nand_decode_ext_id(mtd, chip, id_data, &busw);
+ } else {
+ nand_decode_id(mtd, chip, type, id_data, &busw);
+ }
+ /* Get chip options */
+ chip->options |= type->options;
+
+ /*
+ * Check if chip is not a Samsung device. Do not clear the
+ * options for chips which do not have an extended id.
+ */
+ if (*maf_id != NAND_MFR_SAMSUNG && !type->pagesize)
+ chip->options &= ~NAND_SAMSUNG_LP_OPTIONS;
+ident_done:
+
+ /* Try to identify manufacturer */
+ for (maf_idx = 0; nand_manuf_ids[maf_idx].id != 0x0; maf_idx++) {
+ if (nand_manuf_ids[maf_idx].id == *maf_id)
+ break;
+ }
+
+ if (chip->options & NAND_BUSWIDTH_AUTO) {
+ WARN_ON(chip->options & NAND_BUSWIDTH_16);
+ chip->options |= busw;
+ nand_set_defaults(chip, busw);
+ } else if (busw != (chip->options & NAND_BUSWIDTH_16)) {
+ /*
+ * Check, if buswidth is correct. Hardware drivers should set
+ * chip correct!
+ */
+ pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+ *maf_id, *dev_id);
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name, mtd->name);
+ pr_warn("bus width %d instead %d bit\n",
+ (chip->options & NAND_BUSWIDTH_16) ? 16 : 8,
+ busw ? 16 : 8);
+ return ERR_PTR(-EINVAL);
+ }
+
+ nand_decode_bbm_options(mtd, chip, id_data);
+
+ /* Calculate the address shift from the page size */
+ chip->page_shift = ffs(mtd->writesize) - 1;
+ /* Convert chipsize to number of pages per chip -1 */
+ chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+
+ chip->bbt_erase_shift = chip->phys_erase_shift =
+ ffs(mtd->erasesize) - 1;
+ if (chip->chipsize & 0xffffffff)
+ chip->chip_shift = ffs((unsigned)chip->chipsize) - 1;
+ else {
+ chip->chip_shift = ffs((unsigned)(chip->chipsize >> 32));
+ chip->chip_shift += 32 - 1;
+ }
+
+ chip->badblockbits = 8;
+ chip->erase = single_erase;
+
+ /* Do not replace user supplied command function! */
+ if (mtd->writesize > 512 && chip->cmdfunc == nand_command)
+ chip->cmdfunc = nand_command_lp;
+
+ pr_info("device found, Manufacturer ID: 0x%02x, Chip ID: 0x%02x\n",
+ *maf_id, *dev_id);
+
+ if (chip->onfi_version)
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ chip->onfi_params.model);
+ else if (chip->jedec_version)
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ chip->jedec_params.model);
+ else
+ pr_info("%s %s\n", nand_manuf_ids[maf_idx].name,
+ type->name);
+
+ pr_info("%d MiB, %s, erase size: %d KiB, page size: %d, OOB size: %d\n",
+ (int)(chip->chipsize >> 20), nand_is_slc(chip) ? "SLC" : "MLC",
+ mtd->erasesize >> 10, mtd->writesize, mtd->oobsize);
+ return type;
+}
+
+static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip,
+ struct device_node *dn)
+{
+ int ecc_mode, ecc_strength, ecc_step;
+
+ if (of_get_nand_bus_width(dn) == 16)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ if (of_get_nand_on_flash_bbt(dn))
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+
+ ecc_mode = of_get_nand_ecc_mode(dn);
+ ecc_strength = of_get_nand_ecc_strength(dn);
+ ecc_step = of_get_nand_ecc_step_size(dn);
+
+ if ((ecc_step >= 0 && !(ecc_strength >= 0)) ||
+ (!(ecc_step >= 0) && ecc_strength >= 0)) {
+ pr_err("must set both strength and step size in DT\n");
+ return -EINVAL;
+ }
+
+ if (ecc_mode >= 0)
+ chip->ecc.mode = ecc_mode;
+
+ if (ecc_strength >= 0)
+ chip->ecc.strength = ecc_strength;
+
+ if (ecc_step > 0)
+ chip->ecc.size = ecc_step;
+
+ return 0;
+}
+
+/**
+ * nand_scan_ident - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ * @table: alternative NAND ID table
+ *
+ * This is the first phase of the normal nand_scan() function. It reads the
+ * flash ID and sets up MTD fields accordingly.
+ *
+ */
+int nand_scan_ident(struct mtd_info *mtd, int maxchips,
+ struct nand_flash_dev *table)
+{
+ int i, nand_maf_id, nand_dev_id;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_flash_dev *type;
+ int ret;
+
+ if (chip->flash_node) {
+ ret = nand_dt_init(mtd, chip, chip->flash_node);
+ if (ret)
+ return ret;
+ }
+
+ if (!mtd->name && mtd->dev.parent)
+ mtd->name = dev_name(mtd->dev.parent);
+
+ /* Set the default functions */
+ nand_set_defaults(chip, chip->options & NAND_BUSWIDTH_16);
+
+ /* Read the flash type */
+ type = nand_get_flash_type(mtd, chip, &nand_maf_id,
+ &nand_dev_id, table);
+
+ if (IS_ERR(type)) {
+ if (!(chip->options & NAND_SCAN_SILENT_NODEV))
+ pr_warn("No NAND device found\n");
+ chip->select_chip(mtd, -1);
+ return PTR_ERR(type);
+ }
+
+ chip->select_chip(mtd, -1);
+
+ /* Check for a chip array */
+ for (i = 1; i < maxchips; i++) {
+ chip->select_chip(mtd, i);
+ /* See comment in nand_get_flash_type for reset */
+ chip->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
+ /* Send the command for reading device ID */
+ chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1);
+ /* Read manufacturer and device IDs */
+ if (nand_maf_id != chip->read_byte(mtd) ||
+ nand_dev_id != chip->read_byte(mtd)) {
+ chip->select_chip(mtd, -1);
+ break;
+ }
+ chip->select_chip(mtd, -1);
+ }
+ if (i > 1)
+ pr_info("%d chips detected\n", i);
+
+ /* Store the number of chips and calc total size for mtd */
+ chip->numchips = i;
+ mtd->size = i * chip->chipsize;
+
+ return 0;
+}
+EXPORT_SYMBOL(nand_scan_ident);
+
+/*
+ * Check if the chip configuration meet the datasheet requirements.
+
+ * If our configuration corrects A bits per B bytes and the minimum
+ * required correction level is X bits per Y bytes, then we must ensure
+ * both of the following are true:
+ *
+ * (1) A / B >= X / Y
+ * (2) A >= X
+ *
+ * Requirement (1) ensures we can correct for the required bitflip density.
+ * Requirement (2) ensures we can correct even when all bitflips are clumped
+ * in the same sector.
+ */
+static bool nand_ecc_strength_good(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int corr, ds_corr;
+
+ if (ecc->size == 0 || chip->ecc_step_ds == 0)
+ /* Not enough information */
+ return true;
+
+ /*
+ * We get the number of corrected bits per page to compare
+ * the correction density.
+ */
+ corr = (mtd->writesize * ecc->strength) / ecc->size;
+ ds_corr = (mtd->writesize * chip->ecc_strength_ds) / chip->ecc_step_ds;
+
+ return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
+}
+
+/**
+ * nand_scan_tail - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ *
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
+ */
+int nand_scan_tail(struct mtd_info *mtd)
+{
+ int i;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct nand_buffers *nbuf;
+
+ /* New bad blocks should be marked in OOB, flash-based BBT, or both */
+ BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+ !(chip->bbt_options & NAND_BBT_USE_FLASH));
+
+ if (!(chip->options & NAND_OWN_BUFFERS)) {
+ nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
+ + mtd->oobsize * 3, GFP_KERNEL);
+ if (!nbuf)
+ return -ENOMEM;
+ nbuf->ecccalc = (uint8_t *)(nbuf + 1);
+ nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
+ nbuf->databuf = nbuf->ecccode + mtd->oobsize;
+
+ chip->buffers = nbuf;
+ } else {
+ if (!chip->buffers)
+ return -ENOMEM;
+ }
+
+ /* Set the internal oob buffer location, just after the page data */
+ chip->oob_poi = chip->buffers->databuf + mtd->writesize;
+
+ /*
+ * If no default placement scheme is given, select an appropriate one.
+ */
+ if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
+ switch (mtd->oobsize) {
+ case 8:
+ ecc->layout = &nand_oob_8;
+ break;
+ case 16:
+ ecc->layout = &nand_oob_16;
+ break;
+ case 64:
+ ecc->layout = &nand_oob_64;
+ break;
+ case 128:
+ ecc->layout = &nand_oob_128;
+ break;
+ default:
+ pr_warn("No oob scheme defined for oobsize %d\n",
+ mtd->oobsize);
+ BUG();
+ }
+ }
+
+ if (!chip->write_page)
+ chip->write_page = nand_write_page;
+
+ /*
+ * Check ECC mode, default to software if 3byte/512byte hardware ECC is
+ * selected and we have 256 byte pagesize fallback to software ECC
+ */
+
+ switch (ecc->mode) {
+ case NAND_ECC_HW_OOB_FIRST:
+ /* Similar to NAND_ECC_HW, but a separate read_page handle */
+ if (!ecc->calculate || !ecc->correct || !ecc->hwctl) {
+ pr_warn("No ECC functions supplied; hardware ECC not possible\n");
+ BUG();
+ }
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_hwecc_oob_first;
+
+ case NAND_ECC_HW:
+ /* Use standard hwecc read page function? */
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_hwecc;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_hwecc;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_std;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->read_subpage)
+ ecc->read_subpage = nand_read_subpage;
+ if (!ecc->write_subpage)
+ ecc->write_subpage = nand_write_subpage_hwecc;
+
+ case NAND_ECC_HW_SYNDROME:
+ if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
+ (!ecc->read_page ||
+ ecc->read_page == nand_read_page_hwecc ||
+ !ecc->write_page ||
+ ecc->write_page == nand_write_page_hwecc)) {
+ pr_warn("No ECC functions supplied; hardware ECC not possible\n");
+ BUG();
+ }
+ /* Use standard syndrome read/write page function? */
+ if (!ecc->read_page)
+ ecc->read_page = nand_read_page_syndrome;
+ if (!ecc->write_page)
+ ecc->write_page = nand_write_page_syndrome;
+ if (!ecc->read_page_raw)
+ ecc->read_page_raw = nand_read_page_raw_syndrome;
+ if (!ecc->write_page_raw)
+ ecc->write_page_raw = nand_write_page_raw_syndrome;
+ if (!ecc->read_oob)
+ ecc->read_oob = nand_read_oob_syndrome;
+ if (!ecc->write_oob)
+ ecc->write_oob = nand_write_oob_syndrome;
+
+ if (mtd->writesize >= ecc->size) {
+ if (!ecc->strength) {
+ pr_warn("Driver must set ecc.strength when using hardware ECC\n");
+ BUG();
+ }
+ break;
+ }
+ pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
+ ecc->size, mtd->writesize);
+ ecc->mode = NAND_ECC_SOFT;
+
+ case NAND_ECC_SOFT:
+ ecc->calculate = nand_calculate_ecc;
+ ecc->correct = nand_correct_data;
+ ecc->read_page = nand_read_page_swecc;
+ ecc->read_subpage = nand_read_subpage;
+ ecc->write_page = nand_write_page_swecc;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
+ if (!ecc->size)
+ ecc->size = 256;
+ ecc->bytes = 3;
+ ecc->strength = 1;
+ break;
+
+ case NAND_ECC_SOFT_BCH:
+ if (!mtd_nand_has_bch()) {
+ pr_warn("CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+ BUG();
+ }
+ ecc->calculate = nand_bch_calculate_ecc;
+ ecc->correct = nand_bch_correct_data;
+ ecc->read_page = nand_read_page_swecc;
+ ecc->read_subpage = nand_read_subpage;
+ ecc->write_page = nand_write_page_swecc;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->write_oob = nand_write_oob_std;
+ /*
+ * Board driver should supply ecc.size and ecc.strength values
+ * to select how many bits are correctable. Otherwise, default
+ * to 4 bits for large page devices.
+ */
+ if (!ecc->size && (mtd->oobsize >= 64)) {
+ ecc->size = 512;
+ ecc->strength = 4;
+ }
+
+ /* See nand_bch_init() for details. */
+ ecc->bytes = DIV_ROUND_UP(
+ ecc->strength * fls(8 * ecc->size), 8);
+ ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
+ &ecc->layout);
+ if (!ecc->priv) {
+ pr_warn("BCH ECC initialization failed!\n");
+ BUG();
+ }
+ break;
+
+ case NAND_ECC_NONE:
+ pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
+ ecc->read_page = nand_read_page_raw;
+ ecc->write_page = nand_write_page_raw;
+ ecc->read_oob = nand_read_oob_std;
+ ecc->read_page_raw = nand_read_page_raw;
+ ecc->write_page_raw = nand_write_page_raw;
+ ecc->write_oob = nand_write_oob_std;
+ ecc->size = mtd->writesize;
+ ecc->bytes = 0;
+ ecc->strength = 0;
+ break;
+
+ default:
+ pr_warn("Invalid NAND_ECC_MODE %d\n", ecc->mode);
+ BUG();
+ }
+
+ /* For many systems, the standard OOB write also works for raw */
+ if (!ecc->read_oob_raw)
+ ecc->read_oob_raw = ecc->read_oob;
+ if (!ecc->write_oob_raw)
+ ecc->write_oob_raw = ecc->write_oob;
+
+ /*
+ * The number of bytes available for a client to place data into
+ * the out of band area.
+ */
+ ecc->layout->oobavail = 0;
+ for (i = 0; ecc->layout->oobfree[i].length
+ && i < ARRAY_SIZE(ecc->layout->oobfree); i++)
+ ecc->layout->oobavail += ecc->layout->oobfree[i].length;
+ mtd->oobavail = ecc->layout->oobavail;
+
+ /* ECC sanity check: warn if it's too weak */
+ if (!nand_ecc_strength_good(mtd))
+ pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
+ mtd->name);
+
+ /*
+ * Set the number of read / write steps for one page depending on ECC
+ * mode.
+ */
+ ecc->steps = mtd->writesize / ecc->size;
+ if (ecc->steps * ecc->size != mtd->writesize) {
+ pr_warn("Invalid ECC parameters\n");
+ BUG();
+ }
+ ecc->total = ecc->steps * ecc->bytes;
+
+ /* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
+ if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
+ switch (ecc->steps) {
+ case 2:
+ mtd->subpage_sft = 1;
+ break;
+ case 4:
+ case 8:
+ case 16:
+ mtd->subpage_sft = 2;
+ break;
+ }
+ }
+ chip->subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+ /* Initialize state */
+ chip->state = FL_READY;
+
+ /* Invalidate the pagebuffer reference */
+ chip->pagebuf = -1;
+
+ /* Large page NAND with SOFT_ECC should support subpage reads */
+ switch (ecc->mode) {
+ case NAND_ECC_SOFT:
+ case NAND_ECC_SOFT_BCH:
+ if (chip->page_shift > 9)
+ chip->options |= NAND_SUBPAGE_READ;
+ break;
+
+ default:
+ break;
+ }
+
+ /* Fill in remaining MTD driver data */
+ mtd->type = nand_is_slc(chip) ? MTD_NANDFLASH : MTD_MLCNANDFLASH;
+ mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
+ MTD_CAP_NANDFLASH;
+ mtd->_erase = nand_erase;
+ mtd->_point = NULL;
+ mtd->_unpoint = NULL;
+ mtd->_read = nand_read;
+ mtd->_write = nand_write;
+ mtd->_panic_write = panic_nand_write;
+ mtd->_read_oob = nand_read_oob;
+ mtd->_write_oob = nand_write_oob;
+ mtd->_sync = nand_sync;
+ mtd->_lock = NULL;
+ mtd->_unlock = NULL;
+ mtd->_suspend = nand_suspend;
+ mtd->_resume = nand_resume;
+ mtd->_reboot = nand_shutdown;
+ mtd->_block_isreserved = nand_block_isreserved;
+ mtd->_block_isbad = nand_block_isbad;
+ mtd->_block_markbad = nand_block_markbad;
+ mtd->writebufsize = mtd->writesize;
+
+ /* propagate ecc info to mtd_info */
+ mtd->ecclayout = ecc->layout;
+ mtd->ecc_strength = ecc->strength;
+ mtd->ecc_step_size = ecc->size;
+ /*
+ * Initialize bitflip_threshold to its default prior scan_bbt() call.
+ * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
+ * properly set.
+ */
+ if (!mtd->bitflip_threshold)
+ mtd->bitflip_threshold = DIV_ROUND_UP(mtd->ecc_strength * 3, 4);
+
+ /* Check, if we should skip the bad block table scan */
+ if (chip->options & NAND_SKIP_BBTSCAN)
+ return 0;
+
+ /* Build bad block table */
+ return chip->scan_bbt(mtd);
+}
+EXPORT_SYMBOL(nand_scan_tail);
+
+/*
+ * is_module_text_address() isn't exported, and it's mostly a pointless
+ * test if this is a module _anyway_ -- they'd have to try _really_ hard
+ * to call us from in-kernel code if the core NAND support is modular.
+ */
+#ifdef MODULE
+#define caller_is_module() (1)
+#else
+#define caller_is_module() \
+ is_module_text_address((unsigned long)__builtin_return_address(0))
+#endif
+
+/**
+ * nand_scan - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ * @maxchips: number of chips to scan for
+ *
+ * This fills out all the uninitialized function pointers with the defaults.
+ * The flash ID is read and the mtd/chip structures are filled with the
+ * appropriate values.
+ */
+int nand_scan(struct mtd_info *mtd, int maxchips)
+{
+ int ret;
+
+ ret = nand_scan_ident(mtd, maxchips, NULL);
+ if (!ret)
+ ret = nand_scan_tail(mtd);
+ return ret;
+}
+EXPORT_SYMBOL(nand_scan);
+
+/**
+ * nand_release - [NAND Interface] Free resources held by the NAND device
+ * @mtd: MTD device structure
+ */
+void nand_release(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
+ nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
+
+ mtd_device_unregister(mtd);
+
+ /* Free bad block table memory */
+ kfree(chip->bbt);
+ if (!(chip->options & NAND_OWN_BUFFERS))
+ kfree(chip->buffers);
+
+ /* Free bad block descriptor memory */
+ if (chip->badblock_pattern && chip->badblock_pattern->options
+ & NAND_BBT_DYNAMICSTRUCT)
+ kfree(chip->badblock_pattern);
+}
+EXPORT_SYMBOL_GPL(nand_release);
+
+static int __init nand_base_init(void)
+{
+ led_trigger_register_simple("nand-disk", &nand_led_trigger);
+ return 0;
+}
+
+static void __exit nand_base_exit(void)
+{
+ led_trigger_unregister_simple(nand_led_trigger);
+}
+
+module_init(nand_base_init);
+module_exit(nand_base_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Steven J. Hill <sjhill@realitydiluted.com>");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("Generic NAND flash driver code");
diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c
new file mode 100644
index 0000000..b1d4f81
--- /dev/null
+++ b/drivers/mtd/nand/nand_bbt.c
@@ -0,0 +1,1377 @@
+/*
+ * Overview:
+ * Bad block table support for the NAND driver
+ *
+ * Copyright © 2004 Thomas Gleixner (tglx@linutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Description:
+ *
+ * When nand_scan_bbt is called, then it tries to find the bad block table
+ * depending on the options in the BBT descriptor(s). If no flash based BBT
+ * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory
+ * marked good / bad blocks. This information is used to create a memory BBT.
+ * Once a new bad block is discovered then the "factory" information is updated
+ * on the device.
+ * If a flash based BBT is specified then the function first tries to find the
+ * BBT on flash. If a BBT is found then the contents are read and the memory
+ * based BBT is created. If a mirrored BBT is selected then the mirror is
+ * searched too and the versions are compared. If the mirror has a greater
+ * version number, then the mirror BBT is used to build the memory based BBT.
+ * If the tables are not versioned, then we "or" the bad block information.
+ * If one of the BBTs is out of date or does not exist it is (re)created.
+ * If no BBT exists at all then the device is scanned for factory marked
+ * good / bad blocks and the bad block tables are created.
+ *
+ * For manufacturer created BBTs like the one found on M-SYS DOC devices
+ * the BBT is searched and read but never created
+ *
+ * The auto generated bad block table is located in the last good blocks
+ * of the device. The table is mirrored, so it can be updated eventually.
+ * The table is marked in the OOB area with an ident pattern and a version
+ * number which indicates which of both tables is more up to date. If the NAND
+ * controller needs the complete OOB area for the ECC information then the
+ * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of
+ * course): it moves the ident pattern and the version byte into the data area
+ * and the OOB area will remain untouched.
+ *
+ * The table uses 2 bits per block
+ * 11b: block is good
+ * 00b: block is factory marked bad
+ * 01b, 10b: block is marked bad due to wear
+ *
+ * The memory bad block table uses the following scheme:
+ * 00b: block is good
+ * 01b: block is marked bad due to wear
+ * 10b: block is reserved (to protect the bbt area)
+ * 11b: block is factory marked bad
+ *
+ * Multichip devices like DOC store the bad block info per floor.
+ *
+ * Following assumptions are made:
+ * - bbts start at a page boundary, if autolocated on a block boundary
+ * - the space necessary for a bbt in FLASH does not exceed a block boundary
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/bbm.h>
+#include <linux/mtd/nand.h>
+#include <linux/bitops.h>
+#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/export.h>
+#include <linux/string.h>
+
+#define BBT_BLOCK_GOOD 0x00
+#define BBT_BLOCK_WORN 0x01
+#define BBT_BLOCK_RESERVED 0x02
+#define BBT_BLOCK_FACTORY_BAD 0x03
+
+#define BBT_ENTRY_MASK 0x03
+#define BBT_ENTRY_SHIFT 2
+
+static int nand_update_bbt(struct mtd_info *mtd, loff_t offs);
+
+static inline uint8_t bbt_get_entry(struct nand_chip *chip, int block)
+{
+ uint8_t entry = chip->bbt[block >> BBT_ENTRY_SHIFT];
+ entry >>= (block & BBT_ENTRY_MASK) * 2;
+ return entry & BBT_ENTRY_MASK;
+}
+
+static inline void bbt_mark_entry(struct nand_chip *chip, int block,
+ uint8_t mark)
+{
+ uint8_t msk = (mark & BBT_ENTRY_MASK) << ((block & BBT_ENTRY_MASK) * 2);
+ chip->bbt[block >> BBT_ENTRY_SHIFT] |= msk;
+}
+
+static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td)
+{
+ if (memcmp(buf, td->pattern, td->len))
+ return -1;
+ return 0;
+}
+
+/**
+ * check_pattern - [GENERIC] check if a pattern is in the buffer
+ * @buf: the buffer to search
+ * @len: the length of buffer to search
+ * @paglen: the pagelength
+ * @td: search pattern descriptor
+ *
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers.
+ */
+static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td)
+{
+ if (td->options & NAND_BBT_NO_OOB)
+ return check_pattern_no_oob(buf, td);
+
+ /* Compare the pattern */
+ if (memcmp(buf + paglen + td->offs, td->pattern, td->len))
+ return -1;
+
+ return 0;
+}
+
+/**
+ * check_short_pattern - [GENERIC] check if a pattern is in the buffer
+ * @buf: the buffer to search
+ * @td: search pattern descriptor
+ *
+ * Check for a pattern at the given place. Used to search bad block tables and
+ * good / bad block identifiers. Same as check_pattern, but no optional empty
+ * check.
+ */
+static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td)
+{
+ /* Compare the pattern */
+ if (memcmp(buf + td->offs, td->pattern, td->len))
+ return -1;
+ return 0;
+}
+
+/**
+ * add_marker_len - compute the length of the marker in data area
+ * @td: BBT descriptor used for computation
+ *
+ * The length will be 0 if the marker is located in OOB area.
+ */
+static u32 add_marker_len(struct nand_bbt_descr *td)
+{
+ u32 len;
+
+ if (!(td->options & NAND_BBT_NO_OOB))
+ return 0;
+
+ len = td->len;
+ if (td->options & NAND_BBT_VERSION)
+ len++;
+ return len;
+}
+
+/**
+ * read_bbt - [GENERIC] Read the bad block table starting from page
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @page: the starting page
+ * @num: the number of bbt descriptors to read
+ * @td: the bbt describtion table
+ * @offs: block number offset in the table
+ *
+ * Read the bad block table starting from page.
+ */
+static int read_bbt(struct mtd_info *mtd, uint8_t *buf, int page, int num,
+ struct nand_bbt_descr *td, int offs)
+{
+ int res, ret = 0, i, j, act = 0;
+ struct nand_chip *this = mtd->priv;
+ size_t retlen, len, totlen;
+ loff_t from;
+ int bits = td->options & NAND_BBT_NRBITS_MSK;
+ uint8_t msk = (uint8_t)((1 << bits) - 1);
+ u32 marker_len;
+ int reserved_block_code = td->reserved_block_code;
+
+ totlen = (num * bits) >> 3;
+ marker_len = add_marker_len(td);
+ from = ((loff_t)page) << this->page_shift;
+
+ while (totlen) {
+ len = min(totlen, (size_t)(1 << this->bbt_erase_shift));
+ if (marker_len) {
+ /*
+ * In case the BBT marker is not in the OOB area it
+ * will be just in the first page.
+ */
+ len -= marker_len;
+ from += marker_len;
+ marker_len = 0;
+ }
+ res = mtd_read(mtd, from, len, &retlen, buf);
+ if (res < 0) {
+ if (mtd_is_eccerr(res)) {
+ pr_info("nand_bbt: ECC error in BBT at 0x%012llx\n",
+ from & ~mtd->writesize);
+ return res;
+ } else if (mtd_is_bitflip(res)) {
+ pr_info("nand_bbt: corrected error in BBT at 0x%012llx\n",
+ from & ~mtd->writesize);
+ ret = res;
+ } else {
+ pr_info("nand_bbt: error reading BBT\n");
+ return res;
+ }
+ }
+
+ /* Analyse data */
+ for (i = 0; i < len; i++) {
+ uint8_t dat = buf[i];
+ for (j = 0; j < 8; j += bits, act++) {
+ uint8_t tmp = (dat >> j) & msk;
+ if (tmp == msk)
+ continue;
+ if (reserved_block_code && (tmp == reserved_block_code)) {
+ pr_info("nand_read_bbt: reserved block at 0x%012llx\n",
+ (loff_t)(offs + act) <<
+ this->bbt_erase_shift);
+ bbt_mark_entry(this, offs + act,
+ BBT_BLOCK_RESERVED);
+ mtd->ecc_stats.bbtblocks++;
+ continue;
+ }
+ /*
+ * Leave it for now, if it's matured we can
+ * move this message to pr_debug.
+ */
+ pr_info("nand_read_bbt: bad block at 0x%012llx\n",
+ (loff_t)(offs + act) <<
+ this->bbt_erase_shift);
+ /* Factory marked bad or worn out? */
+ if (tmp == 0)
+ bbt_mark_entry(this, offs + act,
+ BBT_BLOCK_FACTORY_BAD);
+ else
+ bbt_mark_entry(this, offs + act,
+ BBT_BLOCK_WORN);
+ mtd->ecc_stats.badblocks++;
+ }
+ }
+ totlen -= len;
+ from += len;
+ }
+ return ret;
+}
+
+/**
+ * read_abs_bbt - [GENERIC] Read the bad block table starting at a given page
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @chip: read the table for a specific chip, -1 read all chips; applies only if
+ * NAND_BBT_PERCHIP option is set
+ *
+ * Read the bad block table for all chips starting at a given page. We assume
+ * that the bbt bits are in consecutive order.
+ */
+static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
+{
+ struct nand_chip *this = mtd->priv;
+ int res = 0, i;
+
+ if (td->options & NAND_BBT_PERCHIP) {
+ int offs = 0;
+ for (i = 0; i < this->numchips; i++) {
+ if (chip == -1 || chip == i)
+ res = read_bbt(mtd, buf, td->pages[i],
+ this->chipsize >> this->bbt_erase_shift,
+ td, offs);
+ if (res)
+ return res;
+ offs += this->chipsize >> this->bbt_erase_shift;
+ }
+ } else {
+ res = read_bbt(mtd, buf, td->pages[0],
+ mtd->size >> this->bbt_erase_shift, td, 0);
+ if (res)
+ return res;
+ }
+ return 0;
+}
+
+/* BBT marker is in the first page, no OOB */
+static int scan_read_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+ struct nand_bbt_descr *td)
+{
+ size_t retlen;
+ size_t len;
+
+ len = td->len;
+ if (td->options & NAND_BBT_VERSION)
+ len++;
+
+ return mtd_read(mtd, offs, len, &retlen, buf);
+}
+
+/**
+ * scan_read_oob - [GENERIC] Scan data+OOB region to buffer
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @offs: offset at which to scan
+ * @len: length of data region to read
+ *
+ * Scan read data from data+OOB. May traverse multiple pages, interleaving
+ * page,OOB,page,OOB,... in buf. Completes transfer and returns the "strongest"
+ * ECC condition (error or bitflip). May quit on the first (non-ECC) error.
+ */
+static int scan_read_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+ size_t len)
+{
+ struct mtd_oob_ops ops;
+ int res, ret = 0;
+
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ops.ooboffs = 0;
+ ops.ooblen = mtd->oobsize;
+
+ while (len > 0) {
+ ops.datbuf = buf;
+ ops.len = min(len, (size_t)mtd->writesize);
+ ops.oobbuf = buf + ops.len;
+
+ res = mtd_read_oob(mtd, offs, &ops);
+ if (res) {
+ if (!mtd_is_bitflip_or_eccerr(res))
+ return res;
+ else if (mtd_is_eccerr(res) || !ret)
+ ret = res;
+ }
+
+ buf += mtd->oobsize + mtd->writesize;
+ len -= mtd->writesize;
+ offs += mtd->writesize;
+ }
+ return ret;
+}
+
+static int scan_read(struct mtd_info *mtd, uint8_t *buf, loff_t offs,
+ size_t len, struct nand_bbt_descr *td)
+{
+ if (td->options & NAND_BBT_NO_OOB)
+ return scan_read_data(mtd, buf, offs, td);
+ else
+ return scan_read_oob(mtd, buf, offs, len);
+}
+
+/* Scan write data with oob to flash */
+static int scan_write_bbt(struct mtd_info *mtd, loff_t offs, size_t len,
+ uint8_t *buf, uint8_t *oob)
+{
+ struct mtd_oob_ops ops;
+
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ops.ooboffs = 0;
+ ops.ooblen = mtd->oobsize;
+ ops.datbuf = buf;
+ ops.oobbuf = oob;
+ ops.len = len;
+
+ return mtd_write_oob(mtd, offs, &ops);
+}
+
+static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td)
+{
+ u32 ver_offs = td->veroffs;
+
+ if (!(td->options & NAND_BBT_NO_OOB))
+ ver_offs += mtd->writesize;
+ return ver_offs;
+}
+
+/**
+ * read_abs_bbts - [GENERIC] Read the bad block table(s) for all chips starting at a given page
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
+ *
+ * Read the bad block table(s) for all chips starting at a given page. We
+ * assume that the bbt bits are in consecutive order.
+ */
+static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *td, struct nand_bbt_descr *md)
+{
+ struct nand_chip *this = mtd->priv;
+
+ /* Read the primary version, if available */
+ if (td->options & NAND_BBT_VERSION) {
+ scan_read(mtd, buf, (loff_t)td->pages[0] << this->page_shift,
+ mtd->writesize, td);
+ td->version[0] = buf[bbt_get_ver_offs(mtd, td)];
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ td->pages[0], td->version[0]);
+ }
+
+ /* Read the mirror version, if available */
+ if (md && (md->options & NAND_BBT_VERSION)) {
+ scan_read(mtd, buf, (loff_t)md->pages[0] << this->page_shift,
+ mtd->writesize, md);
+ md->version[0] = buf[bbt_get_ver_offs(mtd, md)];
+ pr_info("Bad block table at page %d, version 0x%02X\n",
+ md->pages[0], md->version[0]);
+ }
+}
+
+/* Scan a given block partially */
+static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd,
+ loff_t offs, uint8_t *buf, int numpages)
+{
+ struct mtd_oob_ops ops;
+ int j, ret;
+
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = buf;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+ ops.mode = MTD_OPS_PLACE_OOB;
+
+ for (j = 0; j < numpages; j++) {
+ /*
+ * Read the full oob until read_oob is fixed to handle single
+ * byte reads for 16 bit buswidth.
+ */
+ ret = mtd_read_oob(mtd, offs, &ops);
+ /* Ignore ECC errors when checking for BBM */
+ if (ret && !mtd_is_bitflip_or_eccerr(ret))
+ return ret;
+
+ if (check_short_pattern(buf, bd))
+ return 1;
+
+ offs += mtd->writesize;
+ }
+ return 0;
+}
+
+/**
+ * create_bbt - [GENERIC] Create a bad block table by scanning the device
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
+ * @chip: create the table for a specific chip, -1 read all chips; applies only
+ * if NAND_BBT_PERCHIP option is set
+ *
+ * Create a bad block table by scanning the device for the given good/bad block
+ * identify pattern.
+ */
+static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *bd, int chip)
+{
+ struct nand_chip *this = mtd->priv;
+ int i, numblocks, numpages;
+ int startblock;
+ loff_t from;
+
+ pr_info("Scanning device for bad blocks\n");
+
+ if (bd->options & NAND_BBT_SCAN2NDPAGE)
+ numpages = 2;
+ else
+ numpages = 1;
+
+ if (chip == -1) {
+ numblocks = mtd->size >> this->bbt_erase_shift;
+ startblock = 0;
+ from = 0;
+ } else {
+ if (chip >= this->numchips) {
+ pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",
+ chip + 1, this->numchips);
+ return -EINVAL;
+ }
+ numblocks = this->chipsize >> this->bbt_erase_shift;
+ startblock = chip * numblocks;
+ numblocks += startblock;
+ from = (loff_t)startblock << this->bbt_erase_shift;
+ }
+
+ if (this->bbt_options & NAND_BBT_SCANLASTPAGE)
+ from += mtd->erasesize - (mtd->writesize * numpages);
+
+ for (i = startblock; i < numblocks; i++) {
+ int ret;
+
+ BUG_ON(bd->options & NAND_BBT_NO_OOB);
+
+ ret = scan_block_fast(mtd, bd, from, buf, numpages);
+ if (ret < 0)
+ return ret;
+
+ if (ret) {
+ bbt_mark_entry(this, i, BBT_BLOCK_FACTORY_BAD);
+ pr_warn("Bad eraseblock %d at 0x%012llx\n",
+ i, (unsigned long long)from);
+ mtd->ecc_stats.badblocks++;
+ }
+
+ from += (1 << this->bbt_erase_shift);
+ }
+ return 0;
+}
+
+/**
+ * search_bbt - [GENERIC] scan the device for a specific bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ *
+ * Read the bad block table by searching for a given ident pattern. Search is
+ * preformed either from the beginning up or from the end of the device
+ * downwards. The search starts always at the start of a block. If the option
+ * NAND_BBT_PERCHIP is given, each chip is searched for a bbt, which contains
+ * the bad block information of this chip. This is necessary to provide support
+ * for certain DOC devices.
+ *
+ * The bbt ident pattern resides in the oob area of the first page in a block.
+ */
+static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
+{
+ struct nand_chip *this = mtd->priv;
+ int i, chips;
+ int startblock, block, dir;
+ int scanlen = mtd->writesize + mtd->oobsize;
+ int bbtblocks;
+ int blocktopage = this->bbt_erase_shift - this->page_shift;
+
+ /* Search direction top -> down? */
+ if (td->options & NAND_BBT_LASTBLOCK) {
+ startblock = (mtd->size >> this->bbt_erase_shift) - 1;
+ dir = -1;
+ } else {
+ startblock = 0;
+ dir = 1;
+ }
+
+ /* Do we have a bbt per chip? */
+ if (td->options & NAND_BBT_PERCHIP) {
+ chips = this->numchips;
+ bbtblocks = this->chipsize >> this->bbt_erase_shift;
+ startblock &= bbtblocks - 1;
+ } else {
+ chips = 1;
+ bbtblocks = mtd->size >> this->bbt_erase_shift;
+ }
+
+ for (i = 0; i < chips; i++) {
+ /* Reset version information */
+ td->version[i] = 0;
+ td->pages[i] = -1;
+ /* Scan the maximum number of blocks */
+ for (block = 0; block < td->maxblocks; block++) {
+
+ int actblock = startblock + dir * block;
+ loff_t offs = (loff_t)actblock << this->bbt_erase_shift;
+
+ /* Read first page */
+ scan_read(mtd, buf, offs, mtd->writesize, td);
+ if (!check_pattern(buf, scanlen, mtd->writesize, td)) {
+ td->pages[i] = actblock << blocktopage;
+ if (td->options & NAND_BBT_VERSION) {
+ offs = bbt_get_ver_offs(mtd, td);
+ td->version[i] = buf[offs];
+ }
+ break;
+ }
+ }
+ startblock += this->chipsize >> this->bbt_erase_shift;
+ }
+ /* Check, if we found a bbt for each requested chip */
+ for (i = 0; i < chips; i++) {
+ if (td->pages[i] == -1)
+ pr_warn("Bad block table not found for chip %d\n", i);
+ else
+ pr_info("Bad block table found at page %d, version 0x%02X\n",
+ td->pages[i], td->version[i]);
+ }
+ return 0;
+}
+
+/**
+ * search_read_bbts - [GENERIC] scan the device for bad block table(s)
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
+ *
+ * Search and read the bad block table(s).
+ */
+static void search_read_bbts(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *td,
+ struct nand_bbt_descr *md)
+{
+ /* Search the primary table */
+ search_bbt(mtd, buf, td);
+
+ /* Search the mirror table */
+ if (md)
+ search_bbt(mtd, buf, md);
+}
+
+/**
+ * write_bbt - [GENERIC] (Re)write the bad block table
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @td: descriptor for the bad block table
+ * @md: descriptor for the bad block table mirror
+ * @chipsel: selector for a specific chip, -1 for all
+ *
+ * (Re)write the bad block table.
+ */
+static int write_bbt(struct mtd_info *mtd, uint8_t *buf,
+ struct nand_bbt_descr *td, struct nand_bbt_descr *md,
+ int chipsel)
+{
+ struct nand_chip *this = mtd->priv;
+ struct erase_info einfo;
+ int i, res, chip = 0;
+ int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
+ int nrchips, pageoffs, ooboffs;
+ uint8_t msk[4];
+ uint8_t rcode = td->reserved_block_code;
+ size_t retlen, len = 0;
+ loff_t to;
+ struct mtd_oob_ops ops;
+
+ ops.ooblen = mtd->oobsize;
+ ops.ooboffs = 0;
+ ops.datbuf = NULL;
+ ops.mode = MTD_OPS_PLACE_OOB;
+
+ if (!rcode)
+ rcode = 0xff;
+ /* Write bad block table per chip rather than per device? */
+ if (td->options & NAND_BBT_PERCHIP) {
+ numblocks = (int)(this->chipsize >> this->bbt_erase_shift);
+ /* Full device write or specific chip? */
+ if (chipsel == -1) {
+ nrchips = this->numchips;
+ } else {
+ nrchips = chipsel + 1;
+ chip = chipsel;
+ }
+ } else {
+ numblocks = (int)(mtd->size >> this->bbt_erase_shift);
+ nrchips = 1;
+ }
+
+ /* Loop through the chips */
+ for (; chip < nrchips; chip++) {
+ /*
+ * There was already a version of the table, reuse the page
+ * This applies for absolute placement too, as we have the
+ * page nr. in td->pages.
+ */
+ if (td->pages[chip] != -1) {
+ page = td->pages[chip];
+ goto write;
+ }
+
+ /*
+ * Automatic placement of the bad block table. Search direction
+ * top -> down?
+ */
+ if (td->options & NAND_BBT_LASTBLOCK) {
+ startblock = numblocks * (chip + 1) - 1;
+ dir = -1;
+ } else {
+ startblock = chip * numblocks;
+ dir = 1;
+ }
+
+ for (i = 0; i < td->maxblocks; i++) {
+ int block = startblock + dir * i;
+ /* Check, if the block is bad */
+ switch (bbt_get_entry(this, block)) {
+ case BBT_BLOCK_WORN:
+ case BBT_BLOCK_FACTORY_BAD:
+ continue;
+ }
+ page = block <<
+ (this->bbt_erase_shift - this->page_shift);
+ /* Check, if the block is used by the mirror table */
+ if (!md || md->pages[chip] != page)
+ goto write;
+ }
+ pr_err("No space left to write bad block table\n");
+ return -ENOSPC;
+ write:
+
+ /* Set up shift count and masks for the flash table */
+ bits = td->options & NAND_BBT_NRBITS_MSK;
+ msk[2] = ~rcode;
+ switch (bits) {
+ case 1: sft = 3; sftmsk = 0x07; msk[0] = 0x00; msk[1] = 0x01;
+ msk[3] = 0x01;
+ break;
+ case 2: sft = 2; sftmsk = 0x06; msk[0] = 0x00; msk[1] = 0x01;
+ msk[3] = 0x03;
+ break;
+ case 4: sft = 1; sftmsk = 0x04; msk[0] = 0x00; msk[1] = 0x0C;
+ msk[3] = 0x0f;
+ break;
+ case 8: sft = 0; sftmsk = 0x00; msk[0] = 0x00; msk[1] = 0x0F;
+ msk[3] = 0xff;
+ break;
+ default: return -EINVAL;
+ }
+
+ to = ((loff_t)page) << this->page_shift;
+
+ /* Must we save the block contents? */
+ if (td->options & NAND_BBT_SAVECONTENT) {
+ /* Make it block aligned */
+ to &= ~(((loff_t)1 << this->bbt_erase_shift) - 1);
+ len = 1 << this->bbt_erase_shift;
+ res = mtd_read(mtd, to, len, &retlen, buf);
+ if (res < 0) {
+ if (retlen != len) {
+ pr_info("nand_bbt: error reading block for writing the bad block table\n");
+ return res;
+ }
+ pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");
+ }
+ /* Read oob data */
+ ops.ooblen = (len >> this->page_shift) * mtd->oobsize;
+ ops.oobbuf = &buf[len];
+ res = mtd_read_oob(mtd, to + mtd->writesize, &ops);
+ if (res < 0 || ops.oobretlen != ops.ooblen)
+ goto outerr;
+
+ /* Calc the byte offset in the buffer */
+ pageoffs = page - (int)(to >> this->page_shift);
+ offs = pageoffs << this->page_shift;
+ /* Preset the bbt area with 0xff */
+ memset(&buf[offs], 0xff, (size_t)(numblocks >> sft));
+ ooboffs = len + (pageoffs * mtd->oobsize);
+
+ } else if (td->options & NAND_BBT_NO_OOB) {
+ ooboffs = 0;
+ offs = td->len;
+ /* The version byte */
+ if (td->options & NAND_BBT_VERSION)
+ offs++;
+ /* Calc length */
+ len = (size_t)(numblocks >> sft);
+ len += offs;
+ /* Make it page aligned! */
+ len = ALIGN(len, mtd->writesize);
+ /* Preset the buffer with 0xff */
+ memset(buf, 0xff, len);
+ /* Pattern is located at the begin of first page */
+ memcpy(buf, td->pattern, td->len);
+ } else {
+ /* Calc length */
+ len = (size_t)(numblocks >> sft);
+ /* Make it page aligned! */
+ len = ALIGN(len, mtd->writesize);
+ /* Preset the buffer with 0xff */
+ memset(buf, 0xff, len +
+ (len >> this->page_shift)* mtd->oobsize);
+ offs = 0;
+ ooboffs = len;
+ /* Pattern is located in oob area of first page */
+ memcpy(&buf[ooboffs + td->offs], td->pattern, td->len);
+ }
+
+ if (td->options & NAND_BBT_VERSION)
+ buf[ooboffs + td->veroffs] = td->version[chip];
+
+ /* Walk through the memory table */
+ for (i = 0; i < numblocks; i++) {
+ uint8_t dat;
+ int sftcnt = (i << (3 - sft)) & sftmsk;
+ dat = bbt_get_entry(this, chip * numblocks + i);
+ /* Do not store the reserved bbt blocks! */
+ buf[offs + (i >> sft)] &= ~(msk[dat] << sftcnt);
+ }
+
+ memset(&einfo, 0, sizeof(einfo));
+ einfo.mtd = mtd;
+ einfo.addr = to;
+ einfo.len = 1 << this->bbt_erase_shift;
+ res = nand_erase_nand(mtd, &einfo, 1);
+ if (res < 0)
+ goto outerr;
+
+ res = scan_write_bbt(mtd, to, len, buf,
+ td->options & NAND_BBT_NO_OOB ? NULL :
+ &buf[len]);
+ if (res < 0)
+ goto outerr;
+
+ pr_info("Bad block table written to 0x%012llx, version 0x%02X\n",
+ (unsigned long long)to, td->version[chip]);
+
+ /* Mark it as used */
+ td->pages[chip] = page;
+ }
+ return 0;
+
+ outerr:
+ pr_warn("nand_bbt: error while writing bad block table %d\n", res);
+ return res;
+}
+
+/**
+ * nand_memory_bbt - [GENERIC] create a memory based bad block table
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
+ *
+ * The function creates a memory based bbt by scanning the device for
+ * manufacturer / software marked good / bad blocks.
+ */
+static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+ struct nand_chip *this = mtd->priv;
+
+ return create_bbt(mtd, this->buffers->databuf, bd, -1);
+}
+
+/**
+ * check_create - [GENERIC] create and write bbt(s) if necessary
+ * @mtd: MTD device structure
+ * @buf: temporary buffer
+ * @bd: descriptor for the good/bad block search pattern
+ *
+ * The function checks the results of the previous call to read_bbt and creates
+ * / updates the bbt(s) if necessary. Creation is necessary if no bbt was found
+ * for the chip/device. Update is necessary if one of the tables is missing or
+ * the version nr. of one table is less than the other.
+ */
+static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
+{
+ int i, chips, writeops, create, chipsel, res, res2;
+ struct nand_chip *this = mtd->priv;
+ struct nand_bbt_descr *td = this->bbt_td;
+ struct nand_bbt_descr *md = this->bbt_md;
+ struct nand_bbt_descr *rd, *rd2;
+
+ /* Do we have a bbt per chip? */
+ if (td->options & NAND_BBT_PERCHIP)
+ chips = this->numchips;
+ else
+ chips = 1;
+
+ for (i = 0; i < chips; i++) {
+ writeops = 0;
+ create = 0;
+ rd = NULL;
+ rd2 = NULL;
+ res = res2 = 0;
+ /* Per chip or per device? */
+ chipsel = (td->options & NAND_BBT_PERCHIP) ? i : -1;
+ /* Mirrored table available? */
+ if (md) {
+ if (td->pages[i] == -1 && md->pages[i] == -1) {
+ create = 1;
+ writeops = 0x03;
+ } else if (td->pages[i] == -1) {
+ rd = md;
+ writeops = 0x01;
+ } else if (md->pages[i] == -1) {
+ rd = td;
+ writeops = 0x02;
+ } else if (td->version[i] == md->version[i]) {
+ rd = td;
+ if (!(td->options & NAND_BBT_VERSION))
+ rd2 = md;
+ } else if (((int8_t)(td->version[i] - md->version[i])) > 0) {
+ rd = td;
+ writeops = 0x02;
+ } else {
+ rd = md;
+ writeops = 0x01;
+ }
+ } else {
+ if (td->pages[i] == -1) {
+ create = 1;
+ writeops = 0x01;
+ } else {
+ rd = td;
+ }
+ }
+
+ if (create) {
+ /* Create the bad block table by scanning the device? */
+ if (!(td->options & NAND_BBT_CREATE))
+ continue;
+
+ /* Create the table in memory by scanning the chip(s) */
+ if (!(this->bbt_options & NAND_BBT_CREATE_EMPTY))
+ create_bbt(mtd, buf, bd, chipsel);
+
+ td->version[i] = 1;
+ if (md)
+ md->version[i] = 1;
+ }
+
+ /* Read back first? */
+ if (rd) {
+ res = read_abs_bbt(mtd, buf, rd, chipsel);
+ if (mtd_is_eccerr(res)) {
+ /* Mark table as invalid */
+ rd->pages[i] = -1;
+ rd->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+ /* If they weren't versioned, read both */
+ if (rd2) {
+ res2 = read_abs_bbt(mtd, buf, rd2, chipsel);
+ if (mtd_is_eccerr(res2)) {
+ /* Mark table as invalid */
+ rd2->pages[i] = -1;
+ rd2->version[i] = 0;
+ i--;
+ continue;
+ }
+ }
+
+ /* Scrub the flash table(s)? */
+ if (mtd_is_bitflip(res) || mtd_is_bitflip(res2))
+ writeops = 0x03;
+
+ /* Update version numbers before writing */
+ if (md) {
+ td->version[i] = max(td->version[i], md->version[i]);
+ md->version[i] = td->version[i];
+ }
+
+ /* Write the bad block table to the device? */
+ if ((writeops & 0x01) && (td->options & NAND_BBT_WRITE)) {
+ res = write_bbt(mtd, buf, td, md, chipsel);
+ if (res < 0)
+ return res;
+ }
+
+ /* Write the mirror bad block table to the device? */
+ if ((writeops & 0x02) && md && (md->options & NAND_BBT_WRITE)) {
+ res = write_bbt(mtd, buf, md, td, chipsel);
+ if (res < 0)
+ return res;
+ }
+ }
+ return 0;
+}
+
+/**
+ * mark_bbt_regions - [GENERIC] mark the bad block table regions
+ * @mtd: MTD device structure
+ * @td: bad block table descriptor
+ *
+ * The bad block table regions are marked as "bad" to prevent accidental
+ * erasures / writes. The regions are identified by the mark 0x02.
+ */
+static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
+{
+ struct nand_chip *this = mtd->priv;
+ int i, j, chips, block, nrblocks, update;
+ uint8_t oldval;
+
+ /* Do we have a bbt per chip? */
+ if (td->options & NAND_BBT_PERCHIP) {
+ chips = this->numchips;
+ nrblocks = (int)(this->chipsize >> this->bbt_erase_shift);
+ } else {
+ chips = 1;
+ nrblocks = (int)(mtd->size >> this->bbt_erase_shift);
+ }
+
+ for (i = 0; i < chips; i++) {
+ if ((td->options & NAND_BBT_ABSPAGE) ||
+ !(td->options & NAND_BBT_WRITE)) {
+ if (td->pages[i] == -1)
+ continue;
+ block = td->pages[i] >> (this->bbt_erase_shift - this->page_shift);
+ oldval = bbt_get_entry(this, block);
+ bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
+ if ((oldval != BBT_BLOCK_RESERVED) &&
+ td->reserved_block_code)
+ nand_update_bbt(mtd, (loff_t)block <<
+ this->bbt_erase_shift);
+ continue;
+ }
+ update = 0;
+ if (td->options & NAND_BBT_LASTBLOCK)
+ block = ((i + 1) * nrblocks) - td->maxblocks;
+ else
+ block = i * nrblocks;
+ for (j = 0; j < td->maxblocks; j++) {
+ oldval = bbt_get_entry(this, block);
+ bbt_mark_entry(this, block, BBT_BLOCK_RESERVED);
+ if (oldval != BBT_BLOCK_RESERVED)
+ update = 1;
+ block++;
+ }
+ /*
+ * If we want reserved blocks to be recorded to flash, and some
+ * new ones have been marked, then we need to update the stored
+ * bbts. This should only happen once.
+ */
+ if (update && td->reserved_block_code)
+ nand_update_bbt(mtd, (loff_t)(block - 1) <<
+ this->bbt_erase_shift);
+ }
+}
+
+/**
+ * verify_bbt_descr - verify the bad block description
+ * @mtd: MTD device structure
+ * @bd: the table to verify
+ *
+ * This functions performs a few sanity checks on the bad block description
+ * table.
+ */
+static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+ struct nand_chip *this = mtd->priv;
+ u32 pattern_len;
+ u32 bits;
+ u32 table_size;
+
+ if (!bd)
+ return;
+
+ pattern_len = bd->len;
+ bits = bd->options & NAND_BBT_NRBITS_MSK;
+
+ BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) &&
+ !(this->bbt_options & NAND_BBT_USE_FLASH));
+ BUG_ON(!bits);
+
+ if (bd->options & NAND_BBT_VERSION)
+ pattern_len++;
+
+ if (bd->options & NAND_BBT_NO_OOB) {
+ BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH));
+ BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB));
+ BUG_ON(bd->offs);
+ if (bd->options & NAND_BBT_VERSION)
+ BUG_ON(bd->veroffs != bd->len);
+ BUG_ON(bd->options & NAND_BBT_SAVECONTENT);
+ }
+
+ if (bd->options & NAND_BBT_PERCHIP)
+ table_size = this->chipsize >> this->bbt_erase_shift;
+ else
+ table_size = mtd->size >> this->bbt_erase_shift;
+ table_size >>= 3;
+ table_size *= bits;
+ if (bd->options & NAND_BBT_NO_OOB)
+ table_size += pattern_len;
+ BUG_ON(table_size > (1 << this->bbt_erase_shift));
+}
+
+/**
+ * nand_scan_bbt - [NAND Interface] scan, find, read and maybe create bad block table(s)
+ * @mtd: MTD device structure
+ * @bd: descriptor for the good/bad block search pattern
+ *
+ * The function checks, if a bad block table(s) is/are already available. If
+ * not it scans the device for manufacturer marked good / bad blocks and writes
+ * the bad block table(s) to the selected place.
+ *
+ * The bad block table memory is allocated here. It must be freed by calling
+ * the nand_free_bbt function.
+ */
+static int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
+{
+ struct nand_chip *this = mtd->priv;
+ int len, res;
+ uint8_t *buf;
+ struct nand_bbt_descr *td = this->bbt_td;
+ struct nand_bbt_descr *md = this->bbt_md;
+
+ len = (mtd->size >> (this->bbt_erase_shift + 2)) ? : 1;
+ /*
+ * Allocate memory (2bit per block) and clear the memory bad block
+ * table.
+ */
+ this->bbt = kzalloc(len, GFP_KERNEL);
+ if (!this->bbt)
+ return -ENOMEM;
+
+ /*
+ * If no primary table decriptor is given, scan the device to build a
+ * memory based bad block table.
+ */
+ if (!td) {
+ if ((res = nand_memory_bbt(mtd, bd))) {
+ pr_err("nand_bbt: can't scan flash and build the RAM-based BBT\n");
+ goto err;
+ }
+ return 0;
+ }
+ verify_bbt_descr(mtd, td);
+ verify_bbt_descr(mtd, md);
+
+ /* Allocate a temporary buffer for one eraseblock incl. oob */
+ len = (1 << this->bbt_erase_shift);
+ len += (len >> this->page_shift) * mtd->oobsize;
+ buf = vmalloc(len);
+ if (!buf) {
+ res = -ENOMEM;
+ goto err;
+ }
+
+ /* Is the bbt at a given page? */
+ if (td->options & NAND_BBT_ABSPAGE) {
+ read_abs_bbts(mtd, buf, td, md);
+ } else {
+ /* Search the bad block table using a pattern in oob */
+ search_read_bbts(mtd, buf, td, md);
+ }
+
+ res = check_create(mtd, buf, bd);
+ if (res)
+ goto err;
+
+ /* Prevent the bbt regions from erasing / writing */
+ mark_bbt_region(mtd, td);
+ if (md)
+ mark_bbt_region(mtd, md);
+
+ vfree(buf);
+ return 0;
+
+err:
+ kfree(this->bbt);
+ this->bbt = NULL;
+ return res;
+}
+
+/**
+ * nand_update_bbt - update bad block table(s)
+ * @mtd: MTD device structure
+ * @offs: the offset of the newly marked block
+ *
+ * The function updates the bad block table(s).
+ */
+static int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
+{
+ struct nand_chip *this = mtd->priv;
+ int len, res = 0;
+ int chip, chipsel;
+ uint8_t *buf;
+ struct nand_bbt_descr *td = this->bbt_td;
+ struct nand_bbt_descr *md = this->bbt_md;
+
+ if (!this->bbt || !td)
+ return -EINVAL;
+
+ /* Allocate a temporary buffer for one eraseblock incl. oob */
+ len = (1 << this->bbt_erase_shift);
+ len += (len >> this->page_shift) * mtd->oobsize;
+ buf = kmalloc(len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ /* Do we have a bbt per chip? */
+ if (td->options & NAND_BBT_PERCHIP) {
+ chip = (int)(offs >> this->chip_shift);
+ chipsel = chip;
+ } else {
+ chip = 0;
+ chipsel = -1;
+ }
+
+ td->version[chip]++;
+ if (md)
+ md->version[chip]++;
+
+ /* Write the bad block table to the device? */
+ if (td->options & NAND_BBT_WRITE) {
+ res = write_bbt(mtd, buf, td, md, chipsel);
+ if (res < 0)
+ goto out;
+ }
+ /* Write the mirror bad block table to the device? */
+ if (md && (md->options & NAND_BBT_WRITE)) {
+ res = write_bbt(mtd, buf, md, td, chipsel);
+ }
+
+ out:
+ kfree(buf);
+ return res;
+}
+
+/*
+ * Define some generic bad / good block scan pattern which are used
+ * while scanning a device for factory marked good / bad blocks.
+ */
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+/* Generic flash bbt descriptors */
+static uint8_t bbt_pattern[] = {'B', 'b', 't', '0' };
+static uint8_t mirror_pattern[] = {'1', 't', 'b', 'B' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 8,
+ .len = 4,
+ .veroffs = 12,
+ .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
+ .pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP,
+ .offs = 8,
+ .len = 4,
+ .veroffs = 12,
+ .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
+ .pattern = mirror_pattern
+};
+
+static struct nand_bbt_descr bbt_main_no_oob_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
+ | NAND_BBT_NO_OOB,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
+ .pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_no_oob_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP
+ | NAND_BBT_NO_OOB,
+ .len = 4,
+ .veroffs = 4,
+ .maxblocks = NAND_BBT_SCAN_MAXBLOCKS,
+ .pattern = mirror_pattern
+};
+
+#define BADBLOCK_SCAN_MASK (~NAND_BBT_NO_OOB)
+/**
+ * nand_create_badblock_pattern - [INTERN] Creates a BBT descriptor structure
+ * @this: NAND chip to create descriptor for
+ *
+ * This function allocates and initializes a nand_bbt_descr for BBM detection
+ * based on the properties of @this. The new descriptor is stored in
+ * this->badblock_pattern. Thus, this->badblock_pattern should be NULL when
+ * passed to this function.
+ */
+static int nand_create_badblock_pattern(struct nand_chip *this)
+{
+ struct nand_bbt_descr *bd;
+ if (this->badblock_pattern) {
+ pr_warn("Bad block pattern already allocated; not replacing\n");
+ return -EINVAL;
+ }
+ bd = kzalloc(sizeof(*bd), GFP_KERNEL);
+ if (!bd)
+ return -ENOMEM;
+ bd->options = this->bbt_options & BADBLOCK_SCAN_MASK;
+ bd->offs = this->badblockpos;
+ bd->len = (this->options & NAND_BUSWIDTH_16) ? 2 : 1;
+ bd->pattern = scan_ff_pattern;
+ bd->options |= NAND_BBT_DYNAMICSTRUCT;
+ this->badblock_pattern = bd;
+ return 0;
+}
+
+/**
+ * nand_default_bbt - [NAND Interface] Select a default bad block table for the device
+ * @mtd: MTD device structure
+ *
+ * This function selects the default bad block table support for the device and
+ * calls the nand_scan_bbt function.
+ */
+int nand_default_bbt(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ int ret;
+
+ /* Is a flash based bad block table requested? */
+ if (this->bbt_options & NAND_BBT_USE_FLASH) {
+ /* Use the default pattern descriptors */
+ if (!this->bbt_td) {
+ if (this->bbt_options & NAND_BBT_NO_OOB) {
+ this->bbt_td = &bbt_main_no_oob_descr;
+ this->bbt_md = &bbt_mirror_no_oob_descr;
+ } else {
+ this->bbt_td = &bbt_main_descr;
+ this->bbt_md = &bbt_mirror_descr;
+ }
+ }
+ } else {
+ this->bbt_td = NULL;
+ this->bbt_md = NULL;
+ }
+
+ if (!this->badblock_pattern) {
+ ret = nand_create_badblock_pattern(this);
+ if (ret)
+ return ret;
+ }
+
+ return nand_scan_bbt(mtd, this->badblock_pattern);
+}
+
+/**
+ * nand_isreserved_bbt - [NAND Interface] Check if a block is reserved
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ */
+int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs)
+{
+ struct nand_chip *this = mtd->priv;
+ int block;
+
+ block = (int)(offs >> this->bbt_erase_shift);
+ return bbt_get_entry(this, block) == BBT_BLOCK_RESERVED;
+}
+
+/**
+ * nand_isbad_bbt - [NAND Interface] Check if a block is bad
+ * @mtd: MTD device structure
+ * @offs: offset in the device
+ * @allowbbt: allow access to bad block table region
+ */
+int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
+{
+ struct nand_chip *this = mtd->priv;
+ int block, res;
+
+ block = (int)(offs >> this->bbt_erase_shift);
+ res = bbt_get_entry(this, block);
+
+ pr_debug("nand_isbad_bbt(): bbt info for offs 0x%08x: (block %d) 0x%02x\n",
+ (unsigned int)offs, block, res);
+
+ switch (res) {
+ case BBT_BLOCK_GOOD:
+ return 0;
+ case BBT_BLOCK_WORN:
+ return 1;
+ case BBT_BLOCK_RESERVED:
+ return allowbbt ? 0 : 1;
+ }
+ return 1;
+}
+
+/**
+ * nand_markbad_bbt - [NAND Interface] Mark a block bad in the BBT
+ * @mtd: MTD device structure
+ * @offs: offset of the bad block
+ */
+int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
+{
+ struct nand_chip *this = mtd->priv;
+ int block, ret = 0;
+
+ block = (int)(offs >> this->bbt_erase_shift);
+
+ /* Mark bad block in memory */
+ bbt_mark_entry(this, block, BBT_BLOCK_WORN);
+
+ /* Update flash-based bad block table */
+ if (this->bbt_options & NAND_BBT_USE_FLASH)
+ ret = nand_update_bbt(mtd, offs);
+
+ return ret;
+}
+
+EXPORT_SYMBOL(nand_scan_bbt);
diff --git a/drivers/mtd/nand/nand_bch.c b/drivers/mtd/nand/nand_bch.c
new file mode 100644
index 0000000..3803e0b
--- /dev/null
+++ b/drivers/mtd/nand/nand_bch.c
@@ -0,0 +1,243 @@
+/*
+ * This file provides ECC correction for more than 1 bit per block of data,
+ * using binary BCH codes. It relies on the generic BCH library lib/bch.c.
+ *
+ * Copyright © 2011 Ivan Djelic <ivan.djelic@parrot.com>
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 or (at your option) any
+ * later version.
+ *
+ * This file is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this file; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ */
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/bitops.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_bch.h>
+#include <linux/bch.h>
+
+/**
+ * struct nand_bch_control - private NAND BCH control structure
+ * @bch: BCH control structure
+ * @ecclayout: private ecc layout for this BCH configuration
+ * @errloc: error location array
+ * @eccmask: XOR ecc mask, allows erased pages to be decoded as valid
+ */
+struct nand_bch_control {
+ struct bch_control *bch;
+ struct nand_ecclayout ecclayout;
+ unsigned int *errloc;
+ unsigned char *eccmask;
+};
+
+/**
+ * nand_bch_calculate_ecc - [NAND Interface] Calculate ECC for data block
+ * @mtd: MTD block structure
+ * @buf: input buffer with raw data
+ * @code: output buffer with ECC
+ */
+int nand_bch_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
+ unsigned char *code)
+{
+ const struct nand_chip *chip = mtd->priv;
+ struct nand_bch_control *nbc = chip->ecc.priv;
+ unsigned int i;
+
+ memset(code, 0, chip->ecc.bytes);
+ encode_bch(nbc->bch, buf, chip->ecc.size, code);
+
+ /* apply mask so that an erased page is a valid codeword */
+ for (i = 0; i < chip->ecc.bytes; i++)
+ code[i] ^= nbc->eccmask[i];
+
+ return 0;
+}
+EXPORT_SYMBOL(nand_bch_calculate_ecc);
+
+/**
+ * nand_bch_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @mtd: MTD block structure
+ * @buf: raw data read from the chip
+ * @read_ecc: ECC from the chip
+ * @calc_ecc: the ECC calculated from raw data
+ *
+ * Detect and correct bit errors for a data byte block
+ */
+int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ const struct nand_chip *chip = mtd->priv;
+ struct nand_bch_control *nbc = chip->ecc.priv;
+ unsigned int *errloc = nbc->errloc;
+ int i, count;
+
+ count = decode_bch(nbc->bch, NULL, chip->ecc.size, read_ecc, calc_ecc,
+ NULL, errloc);
+ if (count > 0) {
+ for (i = 0; i < count; i++) {
+ if (errloc[i] < (chip->ecc.size*8))
+ /* error is located in data, correct it */
+ buf[errloc[i] >> 3] ^= (1 << (errloc[i] & 7));
+ /* else error in ecc, no action needed */
+
+ pr_debug("%s: corrected bitflip %u\n", __func__,
+ errloc[i]);
+ }
+ } else if (count < 0) {
+ printk(KERN_ERR "ecc unrecoverable error\n");
+ count = -1;
+ }
+ return count;
+}
+EXPORT_SYMBOL(nand_bch_correct_data);
+
+/**
+ * nand_bch_init - [NAND Interface] Initialize NAND BCH error correction
+ * @mtd: MTD block structure
+ * @eccsize: ecc block size in bytes
+ * @eccbytes: ecc length in bytes
+ * @ecclayout: output default layout
+ *
+ * Returns:
+ * a pointer to a new NAND BCH control structure, or NULL upon failure
+ *
+ * Initialize NAND BCH error correction. Parameters @eccsize and @eccbytes
+ * are used to compute BCH parameters m (Galois field order) and t (error
+ * correction capability). @eccbytes should be equal to the number of bytes
+ * required to store m*t bits, where m is such that 2^m-1 > @eccsize*8.
+ *
+ * Example: to configure 4 bit correction per 512 bytes, you should pass
+ * @eccsize = 512 (thus, m=13 is the smallest integer such that 2^m-1 > 512*8)
+ * @eccbytes = 7 (7 bytes are required to store m*t = 13*4 = 52 bits)
+ */
+struct nand_bch_control *
+nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes,
+ struct nand_ecclayout **ecclayout)
+{
+ unsigned int m, t, eccsteps, i;
+ struct nand_ecclayout *layout;
+ struct nand_bch_control *nbc = NULL;
+ unsigned char *erased_page;
+
+ if (!eccsize || !eccbytes) {
+ printk(KERN_WARNING "ecc parameters not supplied\n");
+ goto fail;
+ }
+
+ m = fls(1+8*eccsize);
+ t = (eccbytes*8)/m;
+
+ nbc = kzalloc(sizeof(*nbc), GFP_KERNEL);
+ if (!nbc)
+ goto fail;
+
+ nbc->bch = init_bch(m, t, 0);
+ if (!nbc->bch)
+ goto fail;
+
+ /* verify that eccbytes has the expected value */
+ if (nbc->bch->ecc_bytes != eccbytes) {
+ printk(KERN_WARNING "invalid eccbytes %u, should be %u\n",
+ eccbytes, nbc->bch->ecc_bytes);
+ goto fail;
+ }
+
+ eccsteps = mtd->writesize/eccsize;
+
+ /* if no ecc placement scheme was provided, build one */
+ if (!*ecclayout) {
+
+ /* handle large page devices only */
+ if (mtd->oobsize < 64) {
+ printk(KERN_WARNING "must provide an oob scheme for "
+ "oobsize %d\n", mtd->oobsize);
+ goto fail;
+ }
+
+ layout = &nbc->ecclayout;
+ layout->eccbytes = eccsteps*eccbytes;
+
+ /* reserve 2 bytes for bad block marker */
+ if (layout->eccbytes+2 > mtd->oobsize) {
+ printk(KERN_WARNING "no suitable oob scheme available "
+ "for oobsize %d eccbytes %u\n", mtd->oobsize,
+ eccbytes);
+ goto fail;
+ }
+ /* put ecc bytes at oob tail */
+ for (i = 0; i < layout->eccbytes; i++)
+ layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
+
+ layout->oobfree[0].offset = 2;
+ layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
+
+ *ecclayout = layout;
+ }
+
+ /* sanity checks */
+ if (8*(eccsize+eccbytes) >= (1 << m)) {
+ printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
+ goto fail;
+ }
+ if ((*ecclayout)->eccbytes != (eccsteps*eccbytes)) {
+ printk(KERN_WARNING "invalid ecc layout\n");
+ goto fail;
+ }
+
+ nbc->eccmask = kmalloc(eccbytes, GFP_KERNEL);
+ nbc->errloc = kmalloc(t*sizeof(*nbc->errloc), GFP_KERNEL);
+ if (!nbc->eccmask || !nbc->errloc)
+ goto fail;
+ /*
+ * compute and store the inverted ecc of an erased ecc block
+ */
+ erased_page = kmalloc(eccsize, GFP_KERNEL);
+ if (!erased_page)
+ goto fail;
+
+ memset(erased_page, 0xff, eccsize);
+ memset(nbc->eccmask, 0, eccbytes);
+ encode_bch(nbc->bch, erased_page, eccsize, nbc->eccmask);
+ kfree(erased_page);
+
+ for (i = 0; i < eccbytes; i++)
+ nbc->eccmask[i] ^= 0xff;
+
+ return nbc;
+fail:
+ nand_bch_free(nbc);
+ return NULL;
+}
+EXPORT_SYMBOL(nand_bch_init);
+
+/**
+ * nand_bch_free - [NAND Interface] Release NAND BCH ECC resources
+ * @nbc: NAND BCH control structure
+ */
+void nand_bch_free(struct nand_bch_control *nbc)
+{
+ if (nbc) {
+ free_bch(nbc->bch);
+ kfree(nbc->errloc);
+ kfree(nbc->eccmask);
+ kfree(nbc);
+ }
+}
+EXPORT_SYMBOL(nand_bch_free);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ivan Djelic <ivan.djelic@parrot.com>");
+MODULE_DESCRIPTION("NAND software BCH ECC support");
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
new file mode 100644
index 0000000..97c4c02
--- /dev/null
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -0,0 +1,533 @@
+/*
+ * This file contains an ECC algorithm that detects and corrects 1 bit
+ * errors in a 256 byte block of data.
+ *
+ * drivers/mtd/nand/nand_ecc.c
+ *
+ * Copyright © 2008 Koninklijke Philips Electronics NV.
+ * Author: Frans Meulenbroeks
+ *
+ * Completely replaces the previous ECC implementation which was written by:
+ * Steven J. Hill (sjhill@realitydiluted.com)
+ * Thomas Gleixner (tglx@linutronix.de)
+ *
+ * Information on how this algorithm works and how it was developed
+ * can be found in Documentation/mtd/nand_ecc.txt
+ *
+ * This file is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 or (at your option) any
+ * later version.
+ *
+ * This file is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this file; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ */
+
+/*
+ * The STANDALONE macro is useful when running the code outside the kernel
+ * e.g. when running the code in a testbed or a benchmark program.
+ * When STANDALONE is used, the module related macros are commented out
+ * as well as the linux include files.
+ * Instead a private definition of mtd_info is given to satisfy the compiler
+ * (the code does not use mtd_info, so the code does not care)
+ */
+#ifndef STANDALONE
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <asm/byteorder.h>
+#else
+#include <stdint.h>
+struct mtd_info;
+#define EXPORT_SYMBOL(x) /* x */
+
+#define MODULE_LICENSE(x) /* x */
+#define MODULE_AUTHOR(x) /* x */
+#define MODULE_DESCRIPTION(x) /* x */
+
+#define pr_err printf
+#endif
+
+/*
+ * invparity is a 256 byte table that contains the odd parity
+ * for each byte. So if the number of bits in a byte is even,
+ * the array element is 1, and when the number of bits is odd
+ * the array eleemnt is 0.
+ */
+static const char invparity[256] = {
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 0, 1, 1, 0, 1, 0, 0, 1, 1, 0, 0, 1, 0, 1, 1, 0,
+ 1, 0, 0, 1, 0, 1, 1, 0, 0, 1, 1, 0, 1, 0, 0, 1
+};
+
+/*
+ * bitsperbyte contains the number of bits per byte
+ * this is only used for testing and repairing parity
+ * (a precalculated value slightly improves performance)
+ */
+static const char bitsperbyte[256] = {
+ 0, 1, 1, 2, 1, 2, 2, 3, 1, 2, 2, 3, 2, 3, 3, 4,
+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+ 1, 2, 2, 3, 2, 3, 3, 4, 2, 3, 3, 4, 3, 4, 4, 5,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+ 2, 3, 3, 4, 3, 4, 4, 5, 3, 4, 4, 5, 4, 5, 5, 6,
+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+ 3, 4, 4, 5, 4, 5, 5, 6, 4, 5, 5, 6, 5, 6, 6, 7,
+ 4, 5, 5, 6, 5, 6, 6, 7, 5, 6, 6, 7, 6, 7, 7, 8,
+};
+
+/*
+ * addressbits is a lookup table to filter out the bits from the xor-ed
+ * ECC data that identify the faulty location.
+ * this is only used for repairing parity
+ * see the comments in nand_correct_data for more details
+ */
+static const char addressbits[256] = {
+ 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+ 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+ 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+ 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+ 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+ 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+ 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+ 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+ 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+ 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+ 0x00, 0x00, 0x01, 0x01, 0x00, 0x00, 0x01, 0x01,
+ 0x02, 0x02, 0x03, 0x03, 0x02, 0x02, 0x03, 0x03,
+ 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+ 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+ 0x04, 0x04, 0x05, 0x05, 0x04, 0x04, 0x05, 0x05,
+ 0x06, 0x06, 0x07, 0x07, 0x06, 0x06, 0x07, 0x07,
+ 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+ 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+ 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+ 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+ 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+ 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
+ 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+ 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
+ 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+ 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+ 0x08, 0x08, 0x09, 0x09, 0x08, 0x08, 0x09, 0x09,
+ 0x0a, 0x0a, 0x0b, 0x0b, 0x0a, 0x0a, 0x0b, 0x0b,
+ 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+ 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f,
+ 0x0c, 0x0c, 0x0d, 0x0d, 0x0c, 0x0c, 0x0d, 0x0d,
+ 0x0e, 0x0e, 0x0f, 0x0f, 0x0e, 0x0e, 0x0f, 0x0f
+};
+
+/**
+ * __nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
+ * block
+ * @buf: input buffer with raw data
+ * @eccsize: data bytes per ECC step (256 or 512)
+ * @code: output buffer with ECC
+ */
+void __nand_calculate_ecc(const unsigned char *buf, unsigned int eccsize,
+ unsigned char *code)
+{
+ int i;
+ const uint32_t *bp = (uint32_t *)buf;
+ /* 256 or 512 bytes/ecc */
+ const uint32_t eccsize_mult = eccsize >> 8;
+ uint32_t cur; /* current value in buffer */
+ /* rp0..rp15..rp17 are the various accumulated parities (per byte) */
+ uint32_t rp0, rp1, rp2, rp3, rp4, rp5, rp6, rp7;
+ uint32_t rp8, rp9, rp10, rp11, rp12, rp13, rp14, rp15, rp16;
+ uint32_t uninitialized_var(rp17); /* to make compiler happy */
+ uint32_t par; /* the cumulative parity for all data */
+ uint32_t tmppar; /* the cumulative parity for this iteration;
+ for rp12, rp14 and rp16 at the end of the
+ loop */
+
+ par = 0;
+ rp4 = 0;
+ rp6 = 0;
+ rp8 = 0;
+ rp10 = 0;
+ rp12 = 0;
+ rp14 = 0;
+ rp16 = 0;
+
+ /*
+ * The loop is unrolled a number of times;
+ * This avoids if statements to decide on which rp value to update
+ * Also we process the data by longwords.
+ * Note: passing unaligned data might give a performance penalty.
+ * It is assumed that the buffers are aligned.
+ * tmppar is the cumulative sum of this iteration.
+ * needed for calculating rp12, rp14, rp16 and par
+ * also used as a performance improvement for rp6, rp8 and rp10
+ */
+ for (i = 0; i < eccsize_mult << 2; i++) {
+ cur = *bp++;
+ tmppar = cur;
+ rp4 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp6 ^= tmppar;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp4 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp8 ^= tmppar;
+
+ cur = *bp++;
+ tmppar ^= cur;
+ rp4 ^= cur;
+ rp6 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp6 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp4 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp10 ^= tmppar;
+
+ cur = *bp++;
+ tmppar ^= cur;
+ rp4 ^= cur;
+ rp6 ^= cur;
+ rp8 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp6 ^= cur;
+ rp8 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp4 ^= cur;
+ rp8 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp8 ^= cur;
+
+ cur = *bp++;
+ tmppar ^= cur;
+ rp4 ^= cur;
+ rp6 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp6 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+ rp4 ^= cur;
+ cur = *bp++;
+ tmppar ^= cur;
+
+ par ^= tmppar;
+ if ((i & 0x1) == 0)
+ rp12 ^= tmppar;
+ if ((i & 0x2) == 0)
+ rp14 ^= tmppar;
+ if (eccsize_mult == 2 && (i & 0x4) == 0)
+ rp16 ^= tmppar;
+ }
+
+ /*
+ * handle the fact that we use longword operations
+ * we'll bring rp4..rp14..rp16 back to single byte entities by
+ * shifting and xoring first fold the upper and lower 16 bits,
+ * then the upper and lower 8 bits.
+ */
+ rp4 ^= (rp4 >> 16);
+ rp4 ^= (rp4 >> 8);
+ rp4 &= 0xff;
+ rp6 ^= (rp6 >> 16);
+ rp6 ^= (rp6 >> 8);
+ rp6 &= 0xff;
+ rp8 ^= (rp8 >> 16);
+ rp8 ^= (rp8 >> 8);
+ rp8 &= 0xff;
+ rp10 ^= (rp10 >> 16);
+ rp10 ^= (rp10 >> 8);
+ rp10 &= 0xff;
+ rp12 ^= (rp12 >> 16);
+ rp12 ^= (rp12 >> 8);
+ rp12 &= 0xff;
+ rp14 ^= (rp14 >> 16);
+ rp14 ^= (rp14 >> 8);
+ rp14 &= 0xff;
+ if (eccsize_mult == 2) {
+ rp16 ^= (rp16 >> 16);
+ rp16 ^= (rp16 >> 8);
+ rp16 &= 0xff;
+ }
+
+ /*
+ * we also need to calculate the row parity for rp0..rp3
+ * This is present in par, because par is now
+ * rp3 rp3 rp2 rp2 in little endian and
+ * rp2 rp2 rp3 rp3 in big endian
+ * as well as
+ * rp1 rp0 rp1 rp0 in little endian and
+ * rp0 rp1 rp0 rp1 in big endian
+ * First calculate rp2 and rp3
+ */
+#ifdef __BIG_ENDIAN
+ rp2 = (par >> 16);
+ rp2 ^= (rp2 >> 8);
+ rp2 &= 0xff;
+ rp3 = par & 0xffff;
+ rp3 ^= (rp3 >> 8);
+ rp3 &= 0xff;
+#else
+ rp3 = (par >> 16);
+ rp3 ^= (rp3 >> 8);
+ rp3 &= 0xff;
+ rp2 = par & 0xffff;
+ rp2 ^= (rp2 >> 8);
+ rp2 &= 0xff;
+#endif
+
+ /* reduce par to 16 bits then calculate rp1 and rp0 */
+ par ^= (par >> 16);
+#ifdef __BIG_ENDIAN
+ rp0 = (par >> 8) & 0xff;
+ rp1 = (par & 0xff);
+#else
+ rp1 = (par >> 8) & 0xff;
+ rp0 = (par & 0xff);
+#endif
+
+ /* finally reduce par to 8 bits */
+ par ^= (par >> 8);
+ par &= 0xff;
+
+ /*
+ * and calculate rp5..rp15..rp17
+ * note that par = rp4 ^ rp5 and due to the commutative property
+ * of the ^ operator we can say:
+ * rp5 = (par ^ rp4);
+ * The & 0xff seems superfluous, but benchmarking learned that
+ * leaving it out gives slightly worse results. No idea why, probably
+ * it has to do with the way the pipeline in pentium is organized.
+ */
+ rp5 = (par ^ rp4) & 0xff;
+ rp7 = (par ^ rp6) & 0xff;
+ rp9 = (par ^ rp8) & 0xff;
+ rp11 = (par ^ rp10) & 0xff;
+ rp13 = (par ^ rp12) & 0xff;
+ rp15 = (par ^ rp14) & 0xff;
+ if (eccsize_mult == 2)
+ rp17 = (par ^ rp16) & 0xff;
+
+ /*
+ * Finally calculate the ECC bits.
+ * Again here it might seem that there are performance optimisations
+ * possible, but benchmarks showed that on the system this is developed
+ * the code below is the fastest
+ */
+#ifdef CONFIG_MTD_NAND_ECC_SMC
+ code[0] =
+ (invparity[rp7] << 7) |
+ (invparity[rp6] << 6) |
+ (invparity[rp5] << 5) |
+ (invparity[rp4] << 4) |
+ (invparity[rp3] << 3) |
+ (invparity[rp2] << 2) |
+ (invparity[rp1] << 1) |
+ (invparity[rp0]);
+ code[1] =
+ (invparity[rp15] << 7) |
+ (invparity[rp14] << 6) |
+ (invparity[rp13] << 5) |
+ (invparity[rp12] << 4) |
+ (invparity[rp11] << 3) |
+ (invparity[rp10] << 2) |
+ (invparity[rp9] << 1) |
+ (invparity[rp8]);
+#else
+ code[1] =
+ (invparity[rp7] << 7) |
+ (invparity[rp6] << 6) |
+ (invparity[rp5] << 5) |
+ (invparity[rp4] << 4) |
+ (invparity[rp3] << 3) |
+ (invparity[rp2] << 2) |
+ (invparity[rp1] << 1) |
+ (invparity[rp0]);
+ code[0] =
+ (invparity[rp15] << 7) |
+ (invparity[rp14] << 6) |
+ (invparity[rp13] << 5) |
+ (invparity[rp12] << 4) |
+ (invparity[rp11] << 3) |
+ (invparity[rp10] << 2) |
+ (invparity[rp9] << 1) |
+ (invparity[rp8]);
+#endif
+ if (eccsize_mult == 1)
+ code[2] =
+ (invparity[par & 0xf0] << 7) |
+ (invparity[par & 0x0f] << 6) |
+ (invparity[par & 0xcc] << 5) |
+ (invparity[par & 0x33] << 4) |
+ (invparity[par & 0xaa] << 3) |
+ (invparity[par & 0x55] << 2) |
+ 3;
+ else
+ code[2] =
+ (invparity[par & 0xf0] << 7) |
+ (invparity[par & 0x0f] << 6) |
+ (invparity[par & 0xcc] << 5) |
+ (invparity[par & 0x33] << 4) |
+ (invparity[par & 0xaa] << 3) |
+ (invparity[par & 0x55] << 2) |
+ (invparity[rp17] << 1) |
+ (invparity[rp16] << 0);
+}
+EXPORT_SYMBOL(__nand_calculate_ecc);
+
+/**
+ * nand_calculate_ecc - [NAND Interface] Calculate 3-byte ECC for 256/512-byte
+ * block
+ * @mtd: MTD block structure
+ * @buf: input buffer with raw data
+ * @code: output buffer with ECC
+ */
+int nand_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
+ unsigned char *code)
+{
+ __nand_calculate_ecc(buf,
+ ((struct nand_chip *)mtd->priv)->ecc.size, code);
+
+ return 0;
+}
+EXPORT_SYMBOL(nand_calculate_ecc);
+
+/**
+ * __nand_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @buf: raw data read from the chip
+ * @read_ecc: ECC from the chip
+ * @calc_ecc: the ECC calculated from raw data
+ * @eccsize: data bytes per ECC step (256 or 512)
+ *
+ * Detect and correct a 1 bit error for eccsize byte block
+ */
+int __nand_correct_data(unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc,
+ unsigned int eccsize)
+{
+ unsigned char b0, b1, b2, bit_addr;
+ unsigned int byte_addr;
+ /* 256 or 512 bytes/ecc */
+ const uint32_t eccsize_mult = eccsize >> 8;
+
+ /*
+ * b0 to b2 indicate which bit is faulty (if any)
+ * we might need the xor result more than once,
+ * so keep them in a local var
+ */
+#ifdef CONFIG_MTD_NAND_ECC_SMC
+ b0 = read_ecc[0] ^ calc_ecc[0];
+ b1 = read_ecc[1] ^ calc_ecc[1];
+#else
+ b0 = read_ecc[1] ^ calc_ecc[1];
+ b1 = read_ecc[0] ^ calc_ecc[0];
+#endif
+ b2 = read_ecc[2] ^ calc_ecc[2];
+
+ /* check if there are any bitfaults */
+
+ /* repeated if statements are slightly more efficient than switch ... */
+ /* ordered in order of likelihood */
+
+ if ((b0 | b1 | b2) == 0)
+ return 0; /* no error */
+
+ if ((((b0 ^ (b0 >> 1)) & 0x55) == 0x55) &&
+ (((b1 ^ (b1 >> 1)) & 0x55) == 0x55) &&
+ ((eccsize_mult == 1 && ((b2 ^ (b2 >> 1)) & 0x54) == 0x54) ||
+ (eccsize_mult == 2 && ((b2 ^ (b2 >> 1)) & 0x55) == 0x55))) {
+ /* single bit error */
+ /*
+ * rp17/rp15/13/11/9/7/5/3/1 indicate which byte is the faulty
+ * byte, cp 5/3/1 indicate the faulty bit.
+ * A lookup table (called addressbits) is used to filter
+ * the bits from the byte they are in.
+ * A marginal optimisation is possible by having three
+ * different lookup tables.
+ * One as we have now (for b0), one for b2
+ * (that would avoid the >> 1), and one for b1 (with all values
+ * << 4). However it was felt that introducing two more tables
+ * hardly justify the gain.
+ *
+ * The b2 shift is there to get rid of the lowest two bits.
+ * We could also do addressbits[b2] >> 1 but for the
+ * performance it does not make any difference
+ */
+ if (eccsize_mult == 1)
+ byte_addr = (addressbits[b1] << 4) + addressbits[b0];
+ else
+ byte_addr = (addressbits[b2 & 0x3] << 8) +
+ (addressbits[b1] << 4) + addressbits[b0];
+ bit_addr = addressbits[b2 >> 2];
+ /* flip the bit */
+ buf[byte_addr] ^= (1 << bit_addr);
+ return 1;
+
+ }
+ /* count nr of bits; use table lookup, faster than calculating it */
+ if ((bitsperbyte[b0] + bitsperbyte[b1] + bitsperbyte[b2]) == 1)
+ return 1; /* error in ECC data; no action needed */
+
+ pr_err("%s: uncorrectable ECC error\n", __func__);
+ return -1;
+}
+EXPORT_SYMBOL(__nand_correct_data);
+
+/**
+ * nand_correct_data - [NAND Interface] Detect and correct bit error(s)
+ * @mtd: MTD block structure
+ * @buf: raw data read from the chip
+ * @read_ecc: ECC from the chip
+ * @calc_ecc: the ECC calculated from raw data
+ *
+ * Detect and correct a 1 bit error for 256/512 byte block
+ */
+int nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ return __nand_correct_data(buf, read_ecc, calc_ecc,
+ ((struct nand_chip *)mtd->priv)->ecc.size);
+}
+EXPORT_SYMBOL(nand_correct_data);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Frans Meulenbroeks <fransmeulenbroeks@gmail.com>");
+MODULE_DESCRIPTION("Generic NAND ECC support");
diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c
new file mode 100644
index 0000000..a8804a3
--- /dev/null
+++ b/drivers/mtd/nand/nand_ids.c
@@ -0,0 +1,192 @@
+/*
+ * Copyright (C) 2002 Thomas Gleixner (tglx@linutronix.de)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+#include <linux/sizes.h>
+
+#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS
+#define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16)
+
+#define SP_OPTIONS NAND_NEED_READRDY
+#define SP_OPTIONS16 (SP_OPTIONS | NAND_BUSWIDTH_16)
+
+/*
+ * The chip ID list:
+ * name, device ID, page size, chip size in MiB, eraseblock size, options
+ *
+ * If page size and eraseblock size are 0, the sizes are taken from the
+ * extended chip ID.
+ */
+struct nand_flash_dev nand_flash_ids[] = {
+ /*
+ * Some incompatible NAND chips share device ID's and so must be
+ * listed by full ID. We list them first so that we can easily identify
+ * the most specific match.
+ */
+ {"TC58NVG0S3E 1G 3.3V 8-bit",
+ { .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} },
+ SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512),
+ 2 },
+ {"TC58NVG2S0F 4G 3.3V 8-bit",
+ { .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} },
+ SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) },
+ {"TC58NVG3S0F 8G 3.3V 8-bit",
+ { .id = {0x98, 0xd3, 0x90, 0x26, 0x76, 0x15, 0x02, 0x08} },
+ SZ_4K, SZ_1K, SZ_256K, 0, 8, 232, NAND_ECC_INFO(4, SZ_512) },
+ {"TC58NVG5D2 32G 3.3V 8-bit",
+ { .id = {0x98, 0xd7, 0x94, 0x32, 0x76, 0x56, 0x09, 0x00} },
+ SZ_8K, SZ_4K, SZ_1M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
+ {"TC58NVG6D2 64G 3.3V 8-bit",
+ { .id = {0x98, 0xde, 0x94, 0x82, 0x76, 0x56, 0x04, 0x20} },
+ SZ_8K, SZ_8K, SZ_2M, 0, 8, 640, NAND_ECC_INFO(40, SZ_1K) },
+ {"SDTNRGAMA 64G 3.3V 8-bit",
+ { .id = {0x45, 0xde, 0x94, 0x93, 0x76, 0x50} },
+ SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
+ {"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
+ { .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
+ SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
+ 4 },
+
+ LEGACY_ID_NAND("NAND 4MiB 5V 8-bit", 0x6B, 4, SZ_8K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE5, 4, SZ_8K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xD6, 8, SZ_8K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 8MiB 3,3V 8-bit", 0xE6, 8, SZ_8K, SP_OPTIONS),
+
+ LEGACY_ID_NAND("NAND 16MiB 1,8V 8-bit", 0x33, 16, SZ_16K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 16MiB 3,3V 8-bit", 0x73, 16, SZ_16K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 16MiB 1,8V 16-bit", 0x43, 16, SZ_16K, SP_OPTIONS16),
+ LEGACY_ID_NAND("NAND 16MiB 3,3V 16-bit", 0x53, 16, SZ_16K, SP_OPTIONS16),
+
+ LEGACY_ID_NAND("NAND 32MiB 1,8V 8-bit", 0x35, 32, SZ_16K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 32MiB 3,3V 8-bit", 0x75, 32, SZ_16K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 32MiB 1,8V 16-bit", 0x45, 32, SZ_16K, SP_OPTIONS16),
+ LEGACY_ID_NAND("NAND 32MiB 3,3V 16-bit", 0x55, 32, SZ_16K, SP_OPTIONS16),
+
+ LEGACY_ID_NAND("NAND 64MiB 1,8V 8-bit", 0x36, 64, SZ_16K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 64MiB 3,3V 8-bit", 0x76, 64, SZ_16K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 64MiB 1,8V 16-bit", 0x46, 64, SZ_16K, SP_OPTIONS16),
+ LEGACY_ID_NAND("NAND 64MiB 3,3V 16-bit", 0x56, 64, SZ_16K, SP_OPTIONS16),
+
+ LEGACY_ID_NAND("NAND 128MiB 1,8V 8-bit", 0x78, 128, SZ_16K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 128MiB 1,8V 8-bit", 0x39, 128, SZ_16K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 128MiB 3,3V 8-bit", 0x79, 128, SZ_16K, SP_OPTIONS),
+ LEGACY_ID_NAND("NAND 128MiB 1,8V 16-bit", 0x72, 128, SZ_16K, SP_OPTIONS16),
+ LEGACY_ID_NAND("NAND 128MiB 1,8V 16-bit", 0x49, 128, SZ_16K, SP_OPTIONS16),
+ LEGACY_ID_NAND("NAND 128MiB 3,3V 16-bit", 0x74, 128, SZ_16K, SP_OPTIONS16),
+ LEGACY_ID_NAND("NAND 128MiB 3,3V 16-bit", 0x59, 128, SZ_16K, SP_OPTIONS16),
+
+ LEGACY_ID_NAND("NAND 256MiB 3,3V 8-bit", 0x71, 256, SZ_16K, SP_OPTIONS),
+
+ /*
+ * These are the new chips with large page size. Their page size and
+ * eraseblock size are determined from the extended ID bytes.
+ */
+
+ /* 512 Megabit */
+ EXTENDED_ID_NAND("NAND 64MiB 1,8V 8-bit", 0xA2, 64, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 64MiB 1,8V 8-bit", 0xA0, 64, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit", 0xF2, 64, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit", 0xD0, 64, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 64MiB 3,3V 8-bit", 0xF0, 64, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 64MiB 1,8V 16-bit", 0xB2, 64, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 64MiB 1,8V 16-bit", 0xB0, 64, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 64MiB 3,3V 16-bit", 0xC2, 64, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 64MiB 3,3V 16-bit", 0xC0, 64, LP_OPTIONS16),
+
+ /* 1 Gigabit */
+ EXTENDED_ID_NAND("NAND 128MiB 1,8V 8-bit", 0xA1, 128, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 128MiB 3,3V 8-bit", 0xF1, 128, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 128MiB 3,3V 8-bit", 0xD1, 128, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 128MiB 1,8V 16-bit", 0xB1, 128, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 128MiB 3,3V 16-bit", 0xC1, 128, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 128MiB 1,8V 16-bit", 0xAD, 128, LP_OPTIONS16),
+
+ /* 2 Gigabit */
+ EXTENDED_ID_NAND("NAND 256MiB 1,8V 8-bit", 0xAA, 256, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 256MiB 3,3V 8-bit", 0xDA, 256, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 256MiB 1,8V 16-bit", 0xBA, 256, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 256MiB 3,3V 16-bit", 0xCA, 256, LP_OPTIONS16),
+
+ /* 4 Gigabit */
+ EXTENDED_ID_NAND("NAND 512MiB 1,8V 8-bit", 0xAC, 512, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 512MiB 3,3V 8-bit", 0xDC, 512, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 512MiB 1,8V 16-bit", 0xBC, 512, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 512MiB 3,3V 16-bit", 0xCC, 512, LP_OPTIONS16),
+
+ /* 8 Gigabit */
+ EXTENDED_ID_NAND("NAND 1GiB 1,8V 8-bit", 0xA3, 1024, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 1GiB 3,3V 8-bit", 0xD3, 1024, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 1GiB 1,8V 16-bit", 0xB3, 1024, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 1GiB 3,3V 16-bit", 0xC3, 1024, LP_OPTIONS16),
+
+ /* 16 Gigabit */
+ EXTENDED_ID_NAND("NAND 2GiB 1,8V 8-bit", 0xA5, 2048, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 2GiB 3,3V 8-bit", 0xD5, 2048, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 2GiB 1,8V 16-bit", 0xB5, 2048, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 2GiB 3,3V 16-bit", 0xC5, 2048, LP_OPTIONS16),
+
+ /* 32 Gigabit */
+ EXTENDED_ID_NAND("NAND 4GiB 1,8V 8-bit", 0xA7, 4096, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 4GiB 3,3V 8-bit", 0xD7, 4096, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 4GiB 1,8V 16-bit", 0xB7, 4096, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 4GiB 3,3V 16-bit", 0xC7, 4096, LP_OPTIONS16),
+
+ /* 64 Gigabit */
+ EXTENDED_ID_NAND("NAND 8GiB 1,8V 8-bit", 0xAE, 8192, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 8GiB 3,3V 8-bit", 0xDE, 8192, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 8GiB 1,8V 16-bit", 0xBE, 8192, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 8GiB 3,3V 16-bit", 0xCE, 8192, LP_OPTIONS16),
+
+ /* 128 Gigabit */
+ EXTENDED_ID_NAND("NAND 16GiB 1,8V 8-bit", 0x1A, 16384, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 16GiB 3,3V 8-bit", 0x3A, 16384, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 16GiB 1,8V 16-bit", 0x2A, 16384, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 16GiB 3,3V 16-bit", 0x4A, 16384, LP_OPTIONS16),
+
+ /* 256 Gigabit */
+ EXTENDED_ID_NAND("NAND 32GiB 1,8V 8-bit", 0x1C, 32768, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 32GiB 3,3V 8-bit", 0x3C, 32768, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 32GiB 1,8V 16-bit", 0x2C, 32768, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 32GiB 3,3V 16-bit", 0x4C, 32768, LP_OPTIONS16),
+
+ /* 512 Gigabit */
+ EXTENDED_ID_NAND("NAND 64GiB 1,8V 8-bit", 0x1E, 65536, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 64GiB 3,3V 8-bit", 0x3E, 65536, LP_OPTIONS),
+ EXTENDED_ID_NAND("NAND 64GiB 1,8V 16-bit", 0x2E, 65536, LP_OPTIONS16),
+ EXTENDED_ID_NAND("NAND 64GiB 3,3V 16-bit", 0x4E, 65536, LP_OPTIONS16),
+
+ {NULL}
+};
+
+/* Manufacturer IDs */
+struct nand_manufacturers nand_manuf_ids[] = {
+ {NAND_MFR_TOSHIBA, "Toshiba"},
+ {NAND_MFR_SAMSUNG, "Samsung"},
+ {NAND_MFR_FUJITSU, "Fujitsu"},
+ {NAND_MFR_NATIONAL, "National"},
+ {NAND_MFR_RENESAS, "Renesas"},
+ {NAND_MFR_STMICRO, "ST Micro"},
+ {NAND_MFR_HYNIX, "Hynix"},
+ {NAND_MFR_MICRON, "Micron"},
+ {NAND_MFR_AMD, "AMD/Spansion"},
+ {NAND_MFR_MACRONIX, "Macronix"},
+ {NAND_MFR_EON, "Eon"},
+ {NAND_MFR_SANDISK, "SanDisk"},
+ {NAND_MFR_INTEL, "Intel"},
+ {NAND_MFR_ATO, "ATO"},
+ {0x0, "Unknown"}
+};
+
+EXPORT_SYMBOL(nand_manuf_ids);
+EXPORT_SYMBOL(nand_flash_ids);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("Nand device & manufacturer IDs");
diff --git a/drivers/mtd/nand/nand_timings.c b/drivers/mtd/nand/nand_timings.c
new file mode 100644
index 0000000..e81470a
--- /dev/null
+++ b/drivers/mtd/nand/nand_timings.c
@@ -0,0 +1,253 @@
+/*
+ * Copyright (C) 2014 Free Electrons
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/export.h>
+#include <linux/mtd/nand.h>
+
+static const struct nand_sdr_timings onfi_sdr_timings[] = {
+ /* Mode 0 */
+ {
+ .tADL_min = 200000,
+ .tALH_min = 20000,
+ .tALS_min = 50000,
+ .tAR_min = 25000,
+ .tCEA_max = 100000,
+ .tCEH_min = 20000,
+ .tCH_min = 20000,
+ .tCHZ_max = 100000,
+ .tCLH_min = 20000,
+ .tCLR_min = 20000,
+ .tCLS_min = 50000,
+ .tCOH_min = 0,
+ .tCS_min = 70000,
+ .tDH_min = 20000,
+ .tDS_min = 40000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 10000,
+ .tITC_max = 1000000,
+ .tRC_min = 100000,
+ .tREA_max = 40000,
+ .tREH_min = 30000,
+ .tRHOH_min = 0,
+ .tRHW_min = 200000,
+ .tRHZ_max = 200000,
+ .tRLOH_min = 0,
+ .tRP_min = 50000,
+ .tRST_max = 250000000000ULL,
+ .tWB_max = 200000,
+ .tRR_min = 40000,
+ .tWC_min = 100000,
+ .tWH_min = 30000,
+ .tWHR_min = 120000,
+ .tWP_min = 50000,
+ .tWW_min = 100000,
+ },
+ /* Mode 1 */
+ {
+ .tADL_min = 100000,
+ .tALH_min = 10000,
+ .tALS_min = 25000,
+ .tAR_min = 10000,
+ .tCEA_max = 45000,
+ .tCEH_min = 20000,
+ .tCH_min = 10000,
+ .tCHZ_max = 50000,
+ .tCLH_min = 10000,
+ .tCLR_min = 10000,
+ .tCLS_min = 25000,
+ .tCOH_min = 15000,
+ .tCS_min = 35000,
+ .tDH_min = 10000,
+ .tDS_min = 20000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 50000,
+ .tREA_max = 30000,
+ .tREH_min = 15000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 0,
+ .tRP_min = 25000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWC_min = 45000,
+ .tWH_min = 15000,
+ .tWHR_min = 80000,
+ .tWP_min = 25000,
+ .tWW_min = 100000,
+ },
+ /* Mode 2 */
+ {
+ .tADL_min = 100000,
+ .tALH_min = 10000,
+ .tALS_min = 15000,
+ .tAR_min = 10000,
+ .tCEA_max = 30000,
+ .tCEH_min = 20000,
+ .tCH_min = 10000,
+ .tCHZ_max = 50000,
+ .tCLH_min = 10000,
+ .tCLR_min = 10000,
+ .tCLS_min = 15000,
+ .tCOH_min = 15000,
+ .tCS_min = 25000,
+ .tDH_min = 5000,
+ .tDS_min = 15000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 35000,
+ .tREA_max = 25000,
+ .tREH_min = 15000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 0,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tRP_min = 17000,
+ .tWC_min = 35000,
+ .tWH_min = 15000,
+ .tWHR_min = 80000,
+ .tWP_min = 17000,
+ .tWW_min = 100000,
+ },
+ /* Mode 3 */
+ {
+ .tADL_min = 100000,
+ .tALH_min = 5000,
+ .tALS_min = 10000,
+ .tAR_min = 10000,
+ .tCEA_max = 25000,
+ .tCEH_min = 20000,
+ .tCH_min = 5000,
+ .tCHZ_max = 50000,
+ .tCLH_min = 5000,
+ .tCLR_min = 10000,
+ .tCLS_min = 10000,
+ .tCOH_min = 15000,
+ .tCS_min = 25000,
+ .tDH_min = 5000,
+ .tDS_min = 10000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 30000,
+ .tREA_max = 20000,
+ .tREH_min = 10000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 0,
+ .tRP_min = 15000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWC_min = 30000,
+ .tWH_min = 10000,
+ .tWHR_min = 80000,
+ .tWP_min = 15000,
+ .tWW_min = 100000,
+ },
+ /* Mode 4 */
+ {
+ .tADL_min = 70000,
+ .tALH_min = 5000,
+ .tALS_min = 10000,
+ .tAR_min = 10000,
+ .tCEA_max = 25000,
+ .tCEH_min = 20000,
+ .tCH_min = 5000,
+ .tCHZ_max = 30000,
+ .tCLH_min = 5000,
+ .tCLR_min = 10000,
+ .tCLS_min = 10000,
+ .tCOH_min = 15000,
+ .tCS_min = 20000,
+ .tDH_min = 5000,
+ .tDS_min = 10000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 25000,
+ .tREA_max = 20000,
+ .tREH_min = 10000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 5000,
+ .tRP_min = 12000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWC_min = 25000,
+ .tWH_min = 10000,
+ .tWHR_min = 80000,
+ .tWP_min = 12000,
+ .tWW_min = 100000,
+ },
+ /* Mode 5 */
+ {
+ .tADL_min = 70000,
+ .tALH_min = 5000,
+ .tALS_min = 10000,
+ .tAR_min = 10000,
+ .tCEA_max = 25000,
+ .tCEH_min = 20000,
+ .tCH_min = 5000,
+ .tCHZ_max = 30000,
+ .tCLH_min = 5000,
+ .tCLR_min = 10000,
+ .tCLS_min = 10000,
+ .tCOH_min = 15000,
+ .tCS_min = 15000,
+ .tDH_min = 5000,
+ .tDS_min = 7000,
+ .tFEAT_max = 1000000,
+ .tIR_min = 0,
+ .tITC_max = 1000000,
+ .tRC_min = 20000,
+ .tREA_max = 16000,
+ .tREH_min = 7000,
+ .tRHOH_min = 15000,
+ .tRHW_min = 100000,
+ .tRHZ_max = 100000,
+ .tRLOH_min = 5000,
+ .tRP_min = 10000,
+ .tRR_min = 20000,
+ .tRST_max = 500000000,
+ .tWB_max = 100000,
+ .tWC_min = 20000,
+ .tWH_min = 7000,
+ .tWHR_min = 80000,
+ .tWP_min = 10000,
+ .tWW_min = 100000,
+ },
+};
+
+/**
+ * onfi_async_timing_mode_to_sdr_timings - [NAND Interface] Retrieve NAND
+ * timings according to the given ONFI timing mode
+ * @mode: ONFI timing mode
+ */
+const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode)
+{
+ if (mode < 0 || mode >= ARRAY_SIZE(onfi_sdr_timings))
+ return ERR_PTR(-EINVAL);
+
+ return &onfi_sdr_timings[mode];
+}
+EXPORT_SYMBOL(onfi_async_timing_mode_to_sdr_timings);
diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c
new file mode 100644
index 0000000..b16d70a
--- /dev/null
+++ b/drivers/mtd/nand/nandsim.c
@@ -0,0 +1,2424 @@
+/*
+ * NAND flash simulator.
+ *
+ * Author: Artem B. Bityuckiy <dedekind@oktetlabs.ru>, <dedekind@infradead.org>
+ *
+ * Copyright (C) 2004 Nokia Corporation
+ *
+ * Note: NS means "NAND Simulator".
+ * Note: Input means input TO flash chip, output means output FROM chip.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any later
+ * version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
+ * Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/vmalloc.h>
+#include <linux/math64.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_bch.h>
+#include <linux/mtd/partitions.h>
+#include <linux/delay.h>
+#include <linux/list.h>
+#include <linux/random.h>
+#include <linux/sched.h>
+#include <linux/fs.h>
+#include <linux/pagemap.h>
+#include <linux/seq_file.h>
+#include <linux/debugfs.h>
+
+/* Default simulator parameters values */
+#if !defined(CONFIG_NANDSIM_FIRST_ID_BYTE) || \
+ !defined(CONFIG_NANDSIM_SECOND_ID_BYTE) || \
+ !defined(CONFIG_NANDSIM_THIRD_ID_BYTE) || \
+ !defined(CONFIG_NANDSIM_FOURTH_ID_BYTE)
+#define CONFIG_NANDSIM_FIRST_ID_BYTE 0x98
+#define CONFIG_NANDSIM_SECOND_ID_BYTE 0x39
+#define CONFIG_NANDSIM_THIRD_ID_BYTE 0xFF /* No byte */
+#define CONFIG_NANDSIM_FOURTH_ID_BYTE 0xFF /* No byte */
+#endif
+
+#ifndef CONFIG_NANDSIM_ACCESS_DELAY
+#define CONFIG_NANDSIM_ACCESS_DELAY 25
+#endif
+#ifndef CONFIG_NANDSIM_PROGRAMM_DELAY
+#define CONFIG_NANDSIM_PROGRAMM_DELAY 200
+#endif
+#ifndef CONFIG_NANDSIM_ERASE_DELAY
+#define CONFIG_NANDSIM_ERASE_DELAY 2
+#endif
+#ifndef CONFIG_NANDSIM_OUTPUT_CYCLE
+#define CONFIG_NANDSIM_OUTPUT_CYCLE 40
+#endif
+#ifndef CONFIG_NANDSIM_INPUT_CYCLE
+#define CONFIG_NANDSIM_INPUT_CYCLE 50
+#endif
+#ifndef CONFIG_NANDSIM_BUS_WIDTH
+#define CONFIG_NANDSIM_BUS_WIDTH 8
+#endif
+#ifndef CONFIG_NANDSIM_DO_DELAYS
+#define CONFIG_NANDSIM_DO_DELAYS 0
+#endif
+#ifndef CONFIG_NANDSIM_LOG
+#define CONFIG_NANDSIM_LOG 0
+#endif
+#ifndef CONFIG_NANDSIM_DBG
+#define CONFIG_NANDSIM_DBG 0
+#endif
+#ifndef CONFIG_NANDSIM_MAX_PARTS
+#define CONFIG_NANDSIM_MAX_PARTS 32
+#endif
+
+static uint access_delay = CONFIG_NANDSIM_ACCESS_DELAY;
+static uint programm_delay = CONFIG_NANDSIM_PROGRAMM_DELAY;
+static uint erase_delay = CONFIG_NANDSIM_ERASE_DELAY;
+static uint output_cycle = CONFIG_NANDSIM_OUTPUT_CYCLE;
+static uint input_cycle = CONFIG_NANDSIM_INPUT_CYCLE;
+static uint bus_width = CONFIG_NANDSIM_BUS_WIDTH;
+static uint do_delays = CONFIG_NANDSIM_DO_DELAYS;
+static uint log = CONFIG_NANDSIM_LOG;
+static uint dbg = CONFIG_NANDSIM_DBG;
+static unsigned long parts[CONFIG_NANDSIM_MAX_PARTS];
+static unsigned int parts_num;
+static char *badblocks = NULL;
+static char *weakblocks = NULL;
+static char *weakpages = NULL;
+static unsigned int bitflips = 0;
+static char *gravepages = NULL;
+static unsigned int overridesize = 0;
+static char *cache_file = NULL;
+static unsigned int bbt;
+static unsigned int bch;
+static u_char id_bytes[8] = {
+ [0] = CONFIG_NANDSIM_FIRST_ID_BYTE,
+ [1] = CONFIG_NANDSIM_SECOND_ID_BYTE,
+ [2] = CONFIG_NANDSIM_THIRD_ID_BYTE,
+ [3] = CONFIG_NANDSIM_FOURTH_ID_BYTE,
+ [4 ... 7] = 0xFF,
+};
+
+module_param_array(id_bytes, byte, NULL, 0400);
+module_param_named(first_id_byte, id_bytes[0], byte, 0400);
+module_param_named(second_id_byte, id_bytes[1], byte, 0400);
+module_param_named(third_id_byte, id_bytes[2], byte, 0400);
+module_param_named(fourth_id_byte, id_bytes[3], byte, 0400);
+module_param(access_delay, uint, 0400);
+module_param(programm_delay, uint, 0400);
+module_param(erase_delay, uint, 0400);
+module_param(output_cycle, uint, 0400);
+module_param(input_cycle, uint, 0400);
+module_param(bus_width, uint, 0400);
+module_param(do_delays, uint, 0400);
+module_param(log, uint, 0400);
+module_param(dbg, uint, 0400);
+module_param_array(parts, ulong, &parts_num, 0400);
+module_param(badblocks, charp, 0400);
+module_param(weakblocks, charp, 0400);
+module_param(weakpages, charp, 0400);
+module_param(bitflips, uint, 0400);
+module_param(gravepages, charp, 0400);
+module_param(overridesize, uint, 0400);
+module_param(cache_file, charp, 0400);
+module_param(bbt, uint, 0400);
+module_param(bch, uint, 0400);
+
+MODULE_PARM_DESC(id_bytes, "The ID bytes returned by NAND Flash 'read ID' command");
+MODULE_PARM_DESC(first_id_byte, "The first byte returned by NAND Flash 'read ID' command (manufacturer ID) (obsolete)");
+MODULE_PARM_DESC(second_id_byte, "The second byte returned by NAND Flash 'read ID' command (chip ID) (obsolete)");
+MODULE_PARM_DESC(third_id_byte, "The third byte returned by NAND Flash 'read ID' command (obsolete)");
+MODULE_PARM_DESC(fourth_id_byte, "The fourth byte returned by NAND Flash 'read ID' command (obsolete)");
+MODULE_PARM_DESC(access_delay, "Initial page access delay (microseconds)");
+MODULE_PARM_DESC(programm_delay, "Page programm delay (microseconds");
+MODULE_PARM_DESC(erase_delay, "Sector erase delay (milliseconds)");
+MODULE_PARM_DESC(output_cycle, "Word output (from flash) time (nanoseconds)");
+MODULE_PARM_DESC(input_cycle, "Word input (to flash) time (nanoseconds)");
+MODULE_PARM_DESC(bus_width, "Chip's bus width (8- or 16-bit)");
+MODULE_PARM_DESC(do_delays, "Simulate NAND delays using busy-waits if not zero");
+MODULE_PARM_DESC(log, "Perform logging if not zero");
+MODULE_PARM_DESC(dbg, "Output debug information if not zero");
+MODULE_PARM_DESC(parts, "Partition sizes (in erase blocks) separated by commas");
+/* Page and erase block positions for the following parameters are independent of any partitions */
+MODULE_PARM_DESC(badblocks, "Erase blocks that are initially marked bad, separated by commas");
+MODULE_PARM_DESC(weakblocks, "Weak erase blocks [: remaining erase cycles (defaults to 3)]"
+ " separated by commas e.g. 113:2 means eb 113"
+ " can be erased only twice before failing");
+MODULE_PARM_DESC(weakpages, "Weak pages [: maximum writes (defaults to 3)]"
+ " separated by commas e.g. 1401:2 means page 1401"
+ " can be written only twice before failing");
+MODULE_PARM_DESC(bitflips, "Maximum number of random bit flips per page (zero by default)");
+MODULE_PARM_DESC(gravepages, "Pages that lose data [: maximum reads (defaults to 3)]"
+ " separated by commas e.g. 1401:2 means page 1401"
+ " can be read only twice before failing");
+MODULE_PARM_DESC(overridesize, "Specifies the NAND Flash size overriding the ID bytes. "
+ "The size is specified in erase blocks and as the exponent of a power of two"
+ " e.g. 5 means a size of 32 erase blocks");
+MODULE_PARM_DESC(cache_file, "File to use to cache nand pages instead of memory");
+MODULE_PARM_DESC(bbt, "0 OOB, 1 BBT with marker in OOB, 2 BBT with marker in data area");
+MODULE_PARM_DESC(bch, "Enable BCH ecc and set how many bits should "
+ "be correctable in 512-byte blocks");
+
+/* The largest possible page size */
+#define NS_LARGEST_PAGE_SIZE 4096
+
+/* The prefix for simulator output */
+#define NS_OUTPUT_PREFIX "[nandsim]"
+
+/* Simulator's output macros (logging, debugging, warning, error) */
+#define NS_LOG(args...) \
+ do { if (log) printk(KERN_DEBUG NS_OUTPUT_PREFIX " log: " args); } while(0)
+#define NS_DBG(args...) \
+ do { if (dbg) printk(KERN_DEBUG NS_OUTPUT_PREFIX " debug: " args); } while(0)
+#define NS_WARN(args...) \
+ do { printk(KERN_WARNING NS_OUTPUT_PREFIX " warning: " args); } while(0)
+#define NS_ERR(args...) \
+ do { printk(KERN_ERR NS_OUTPUT_PREFIX " error: " args); } while(0)
+#define NS_INFO(args...) \
+ do { printk(KERN_INFO NS_OUTPUT_PREFIX " " args); } while(0)
+
+/* Busy-wait delay macros (microseconds, milliseconds) */
+#define NS_UDELAY(us) \
+ do { if (do_delays) udelay(us); } while(0)
+#define NS_MDELAY(us) \
+ do { if (do_delays) mdelay(us); } while(0)
+
+/* Is the nandsim structure initialized ? */
+#define NS_IS_INITIALIZED(ns) ((ns)->geom.totsz != 0)
+
+/* Good operation completion status */
+#define NS_STATUS_OK(ns) (NAND_STATUS_READY | (NAND_STATUS_WP * ((ns)->lines.wp == 0)))
+
+/* Operation failed completion status */
+#define NS_STATUS_FAILED(ns) (NAND_STATUS_FAIL | NS_STATUS_OK(ns))
+
+/* Calculate the page offset in flash RAM image by (row, column) address */
+#define NS_RAW_OFFSET(ns) \
+ (((ns)->regs.row * (ns)->geom.pgszoob) + (ns)->regs.column)
+
+/* Calculate the OOB offset in flash RAM image by (row, column) address */
+#define NS_RAW_OFFSET_OOB(ns) (NS_RAW_OFFSET(ns) + ns->geom.pgsz)
+
+/* After a command is input, the simulator goes to one of the following states */
+#define STATE_CMD_READ0 0x00000001 /* read data from the beginning of page */
+#define STATE_CMD_READ1 0x00000002 /* read data from the second half of page */
+#define STATE_CMD_READSTART 0x00000003 /* read data second command (large page devices) */
+#define STATE_CMD_PAGEPROG 0x00000004 /* start page program */
+#define STATE_CMD_READOOB 0x00000005 /* read OOB area */
+#define STATE_CMD_ERASE1 0x00000006 /* sector erase first command */
+#define STATE_CMD_STATUS 0x00000007 /* read status */
+#define STATE_CMD_SEQIN 0x00000009 /* sequential data input */
+#define STATE_CMD_READID 0x0000000A /* read ID */
+#define STATE_CMD_ERASE2 0x0000000B /* sector erase second command */
+#define STATE_CMD_RESET 0x0000000C /* reset */
+#define STATE_CMD_RNDOUT 0x0000000D /* random output command */
+#define STATE_CMD_RNDOUTSTART 0x0000000E /* random output start command */
+#define STATE_CMD_MASK 0x0000000F /* command states mask */
+
+/* After an address is input, the simulator goes to one of these states */
+#define STATE_ADDR_PAGE 0x00000010 /* full (row, column) address is accepted */
+#define STATE_ADDR_SEC 0x00000020 /* sector address was accepted */
+#define STATE_ADDR_COLUMN 0x00000030 /* column address was accepted */
+#define STATE_ADDR_ZERO 0x00000040 /* one byte zero address was accepted */
+#define STATE_ADDR_MASK 0x00000070 /* address states mask */
+
+/* During data input/output the simulator is in these states */
+#define STATE_DATAIN 0x00000100 /* waiting for data input */
+#define STATE_DATAIN_MASK 0x00000100 /* data input states mask */
+
+#define STATE_DATAOUT 0x00001000 /* waiting for page data output */
+#define STATE_DATAOUT_ID 0x00002000 /* waiting for ID bytes output */
+#define STATE_DATAOUT_STATUS 0x00003000 /* waiting for status output */
+#define STATE_DATAOUT_MASK 0x00007000 /* data output states mask */
+
+/* Previous operation is done, ready to accept new requests */
+#define STATE_READY 0x00000000
+
+/* This state is used to mark that the next state isn't known yet */
+#define STATE_UNKNOWN 0x10000000
+
+/* Simulator's actions bit masks */
+#define ACTION_CPY 0x00100000 /* copy page/OOB to the internal buffer */
+#define ACTION_PRGPAGE 0x00200000 /* program the internal buffer to flash */
+#define ACTION_SECERASE 0x00300000 /* erase sector */
+#define ACTION_ZEROOFF 0x00400000 /* don't add any offset to address */
+#define ACTION_HALFOFF 0x00500000 /* add to address half of page */
+#define ACTION_OOBOFF 0x00600000 /* add to address OOB offset */
+#define ACTION_MASK 0x00700000 /* action mask */
+
+#define NS_OPER_NUM 13 /* Number of operations supported by the simulator */
+#define NS_OPER_STATES 6 /* Maximum number of states in operation */
+
+#define OPT_ANY 0xFFFFFFFF /* any chip supports this operation */
+#define OPT_PAGE512 0x00000002 /* 512-byte page chips */
+#define OPT_PAGE2048 0x00000008 /* 2048-byte page chips */
+#define OPT_PAGE512_8BIT 0x00000040 /* 512-byte page chips with 8-bit bus width */
+#define OPT_PAGE4096 0x00000080 /* 4096-byte page chips */
+#define OPT_LARGEPAGE (OPT_PAGE2048 | OPT_PAGE4096) /* 2048 & 4096-byte page chips */
+#define OPT_SMALLPAGE (OPT_PAGE512) /* 512-byte page chips */
+
+/* Remove action bits from state */
+#define NS_STATE(x) ((x) & ~ACTION_MASK)
+
+/*
+ * Maximum previous states which need to be saved. Currently saving is
+ * only needed for page program operation with preceded read command
+ * (which is only valid for 512-byte pages).
+ */
+#define NS_MAX_PREVSTATES 1
+
+/* Maximum page cache pages needed to read or write a NAND page to the cache_file */
+#define NS_MAX_HELD_PAGES 16
+
+struct nandsim_debug_info {
+ struct dentry *dfs_root;
+ struct dentry *dfs_wear_report;
+};
+
+/*
+ * A union to represent flash memory contents and flash buffer.
+ */
+union ns_mem {
+ u_char *byte; /* for byte access */
+ uint16_t *word; /* for 16-bit word access */
+};
+
+/*
+ * The structure which describes all the internal simulator data.
+ */
+struct nandsim {
+ struct mtd_partition partitions[CONFIG_NANDSIM_MAX_PARTS];
+ unsigned int nbparts;
+
+ uint busw; /* flash chip bus width (8 or 16) */
+ u_char ids[8]; /* chip's ID bytes */
+ uint32_t options; /* chip's characteristic bits */
+ uint32_t state; /* current chip state */
+ uint32_t nxstate; /* next expected state */
+
+ uint32_t *op; /* current operation, NULL operations isn't known yet */
+ uint32_t pstates[NS_MAX_PREVSTATES]; /* previous states */
+ uint16_t npstates; /* number of previous states saved */
+ uint16_t stateidx; /* current state index */
+
+ /* The simulated NAND flash pages array */
+ union ns_mem *pages;
+
+ /* Slab allocator for nand pages */
+ struct kmem_cache *nand_pages_slab;
+
+ /* Internal buffer of page + OOB size bytes */
+ union ns_mem buf;
+
+ /* NAND flash "geometry" */
+ struct {
+ uint64_t totsz; /* total flash size, bytes */
+ uint32_t secsz; /* flash sector (erase block) size, bytes */
+ uint pgsz; /* NAND flash page size, bytes */
+ uint oobsz; /* page OOB area size, bytes */
+ uint64_t totszoob; /* total flash size including OOB, bytes */
+ uint pgszoob; /* page size including OOB , bytes*/
+ uint secszoob; /* sector size including OOB, bytes */
+ uint pgnum; /* total number of pages */
+ uint pgsec; /* number of pages per sector */
+ uint secshift; /* bits number in sector size */
+ uint pgshift; /* bits number in page size */
+ uint pgaddrbytes; /* bytes per page address */
+ uint secaddrbytes; /* bytes per sector address */
+ uint idbytes; /* the number ID bytes that this chip outputs */
+ } geom;
+
+ /* NAND flash internal registers */
+ struct {
+ unsigned command; /* the command register */
+ u_char status; /* the status register */
+ uint row; /* the page number */
+ uint column; /* the offset within page */
+ uint count; /* internal counter */
+ uint num; /* number of bytes which must be processed */
+ uint off; /* fixed page offset */
+ } regs;
+
+ /* NAND flash lines state */
+ struct {
+ int ce; /* chip Enable */
+ int cle; /* command Latch Enable */
+ int ale; /* address Latch Enable */
+ int wp; /* write Protect */
+ } lines;
+
+ /* Fields needed when using a cache file */
+ struct file *cfile; /* Open file */
+ unsigned long *pages_written; /* Which pages have been written */
+ void *file_buf;
+ struct page *held_pages[NS_MAX_HELD_PAGES];
+ int held_cnt;
+
+ struct nandsim_debug_info dbg;
+};
+
+/*
+ * Operations array. To perform any operation the simulator must pass
+ * through the correspondent states chain.
+ */
+static struct nandsim_operations {
+ uint32_t reqopts; /* options which are required to perform the operation */
+ uint32_t states[NS_OPER_STATES]; /* operation's states */
+} ops[NS_OPER_NUM] = {
+ /* Read page + OOB from the beginning */
+ {OPT_SMALLPAGE, {STATE_CMD_READ0 | ACTION_ZEROOFF, STATE_ADDR_PAGE | ACTION_CPY,
+ STATE_DATAOUT, STATE_READY}},
+ /* Read page + OOB from the second half */
+ {OPT_PAGE512_8BIT, {STATE_CMD_READ1 | ACTION_HALFOFF, STATE_ADDR_PAGE | ACTION_CPY,
+ STATE_DATAOUT, STATE_READY}},
+ /* Read OOB */
+ {OPT_SMALLPAGE, {STATE_CMD_READOOB | ACTION_OOBOFF, STATE_ADDR_PAGE | ACTION_CPY,
+ STATE_DATAOUT, STATE_READY}},
+ /* Program page starting from the beginning */
+ {OPT_ANY, {STATE_CMD_SEQIN, STATE_ADDR_PAGE, STATE_DATAIN,
+ STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
+ /* Program page starting from the beginning */
+ {OPT_SMALLPAGE, {STATE_CMD_READ0, STATE_CMD_SEQIN | ACTION_ZEROOFF, STATE_ADDR_PAGE,
+ STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
+ /* Program page starting from the second half */
+ {OPT_PAGE512, {STATE_CMD_READ1, STATE_CMD_SEQIN | ACTION_HALFOFF, STATE_ADDR_PAGE,
+ STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
+ /* Program OOB */
+ {OPT_SMALLPAGE, {STATE_CMD_READOOB, STATE_CMD_SEQIN | ACTION_OOBOFF, STATE_ADDR_PAGE,
+ STATE_DATAIN, STATE_CMD_PAGEPROG | ACTION_PRGPAGE, STATE_READY}},
+ /* Erase sector */
+ {OPT_ANY, {STATE_CMD_ERASE1, STATE_ADDR_SEC, STATE_CMD_ERASE2 | ACTION_SECERASE, STATE_READY}},
+ /* Read status */
+ {OPT_ANY, {STATE_CMD_STATUS, STATE_DATAOUT_STATUS, STATE_READY}},
+ /* Read ID */
+ {OPT_ANY, {STATE_CMD_READID, STATE_ADDR_ZERO, STATE_DATAOUT_ID, STATE_READY}},
+ /* Large page devices read page */
+ {OPT_LARGEPAGE, {STATE_CMD_READ0, STATE_ADDR_PAGE, STATE_CMD_READSTART | ACTION_CPY,
+ STATE_DATAOUT, STATE_READY}},
+ /* Large page devices random page read */
+ {OPT_LARGEPAGE, {STATE_CMD_RNDOUT, STATE_ADDR_COLUMN, STATE_CMD_RNDOUTSTART | ACTION_CPY,
+ STATE_DATAOUT, STATE_READY}},
+};
+
+struct weak_block {
+ struct list_head list;
+ unsigned int erase_block_no;
+ unsigned int max_erases;
+ unsigned int erases_done;
+};
+
+static LIST_HEAD(weak_blocks);
+
+struct weak_page {
+ struct list_head list;
+ unsigned int page_no;
+ unsigned int max_writes;
+ unsigned int writes_done;
+};
+
+static LIST_HEAD(weak_pages);
+
+struct grave_page {
+ struct list_head list;
+ unsigned int page_no;
+ unsigned int max_reads;
+ unsigned int reads_done;
+};
+
+static LIST_HEAD(grave_pages);
+
+static unsigned long *erase_block_wear = NULL;
+static unsigned int wear_eb_count = 0;
+static unsigned long total_wear = 0;
+
+/* MTD structure for NAND controller */
+static struct mtd_info *nsmtd;
+
+static int nandsim_debugfs_show(struct seq_file *m, void *private)
+{
+ unsigned long wmin = -1, wmax = 0, avg;
+ unsigned long deciles[10], decile_max[10], tot = 0;
+ unsigned int i;
+
+ /* Calc wear stats */
+ for (i = 0; i < wear_eb_count; ++i) {
+ unsigned long wear = erase_block_wear[i];
+ if (wear < wmin)
+ wmin = wear;
+ if (wear > wmax)
+ wmax = wear;
+ tot += wear;
+ }
+
+ for (i = 0; i < 9; ++i) {
+ deciles[i] = 0;
+ decile_max[i] = (wmax * (i + 1) + 5) / 10;
+ }
+ deciles[9] = 0;
+ decile_max[9] = wmax;
+ for (i = 0; i < wear_eb_count; ++i) {
+ int d;
+ unsigned long wear = erase_block_wear[i];
+ for (d = 0; d < 10; ++d)
+ if (wear <= decile_max[d]) {
+ deciles[d] += 1;
+ break;
+ }
+ }
+ avg = tot / wear_eb_count;
+
+ /* Output wear report */
+ seq_printf(m, "Total numbers of erases: %lu\n", tot);
+ seq_printf(m, "Number of erase blocks: %u\n", wear_eb_count);
+ seq_printf(m, "Average number of erases: %lu\n", avg);
+ seq_printf(m, "Maximum number of erases: %lu\n", wmax);
+ seq_printf(m, "Minimum number of erases: %lu\n", wmin);
+ for (i = 0; i < 10; ++i) {
+ unsigned long from = (i ? decile_max[i - 1] + 1 : 0);
+ if (from > decile_max[i])
+ continue;
+ seq_printf(m, "Number of ebs with erase counts from %lu to %lu : %lu\n",
+ from,
+ decile_max[i],
+ deciles[i]);
+ }
+
+ return 0;
+}
+
+static int nandsim_debugfs_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, nandsim_debugfs_show, inode->i_private);
+}
+
+static const struct file_operations dfs_fops = {
+ .open = nandsim_debugfs_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+/**
+ * nandsim_debugfs_create - initialize debugfs
+ * @dev: nandsim device description object
+ *
+ * This function creates all debugfs files for UBI device @ubi. Returns zero in
+ * case of success and a negative error code in case of failure.
+ */
+static int nandsim_debugfs_create(struct nandsim *dev)
+{
+ struct nandsim_debug_info *dbg = &dev->dbg;
+ struct dentry *dent;
+ int err;
+
+ if (!IS_ENABLED(CONFIG_DEBUG_FS))
+ return 0;
+
+ dent = debugfs_create_dir("nandsim", NULL);
+ if (IS_ERR_OR_NULL(dent)) {
+ int err = dent ? -ENODEV : PTR_ERR(dent);
+
+ NS_ERR("cannot create \"nandsim\" debugfs directory, err %d\n",
+ err);
+ return err;
+ }
+ dbg->dfs_root = dent;
+
+ dent = debugfs_create_file("wear_report", S_IRUSR,
+ dbg->dfs_root, dev, &dfs_fops);
+ if (IS_ERR_OR_NULL(dent))
+ goto out_remove;
+ dbg->dfs_wear_report = dent;
+
+ return 0;
+
+out_remove:
+ debugfs_remove_recursive(dbg->dfs_root);
+ err = dent ? PTR_ERR(dent) : -ENODEV;
+ return err;
+}
+
+/**
+ * nandsim_debugfs_remove - destroy all debugfs files
+ */
+static void nandsim_debugfs_remove(struct nandsim *ns)
+{
+ if (IS_ENABLED(CONFIG_DEBUG_FS))
+ debugfs_remove_recursive(ns->dbg.dfs_root);
+}
+
+/*
+ * Allocate array of page pointers, create slab allocation for an array
+ * and initialize the array by NULL pointers.
+ *
+ * RETURNS: 0 if success, -ENOMEM if memory alloc fails.
+ */
+static int alloc_device(struct nandsim *ns)
+{
+ struct file *cfile;
+ int i, err;
+
+ if (cache_file) {
+ cfile = filp_open(cache_file, O_CREAT | O_RDWR | O_LARGEFILE, 0600);
+ if (IS_ERR(cfile))
+ return PTR_ERR(cfile);
+ if (!(cfile->f_mode & FMODE_CAN_READ)) {
+ NS_ERR("alloc_device: cache file not readable\n");
+ err = -EINVAL;
+ goto err_close;
+ }
+ if (!(cfile->f_mode & FMODE_CAN_WRITE)) {
+ NS_ERR("alloc_device: cache file not writeable\n");
+ err = -EINVAL;
+ goto err_close;
+ }
+ ns->pages_written = vzalloc(BITS_TO_LONGS(ns->geom.pgnum) *
+ sizeof(unsigned long));
+ if (!ns->pages_written) {
+ NS_ERR("alloc_device: unable to allocate pages written array\n");
+ err = -ENOMEM;
+ goto err_close;
+ }
+ ns->file_buf = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
+ if (!ns->file_buf) {
+ NS_ERR("alloc_device: unable to allocate file buf\n");
+ err = -ENOMEM;
+ goto err_free;
+ }
+ ns->cfile = cfile;
+ return 0;
+ }
+
+ ns->pages = vmalloc(ns->geom.pgnum * sizeof(union ns_mem));
+ if (!ns->pages) {
+ NS_ERR("alloc_device: unable to allocate page array\n");
+ return -ENOMEM;
+ }
+ for (i = 0; i < ns->geom.pgnum; i++) {
+ ns->pages[i].byte = NULL;
+ }
+ ns->nand_pages_slab = kmem_cache_create("nandsim",
+ ns->geom.pgszoob, 0, 0, NULL);
+ if (!ns->nand_pages_slab) {
+ NS_ERR("cache_create: unable to create kmem_cache\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+
+err_free:
+ vfree(ns->pages_written);
+err_close:
+ filp_close(cfile, NULL);
+ return err;
+}
+
+/*
+ * Free any allocated pages, and free the array of page pointers.
+ */
+static void free_device(struct nandsim *ns)
+{
+ int i;
+
+ if (ns->cfile) {
+ kfree(ns->file_buf);
+ vfree(ns->pages_written);
+ filp_close(ns->cfile, NULL);
+ return;
+ }
+
+ if (ns->pages) {
+ for (i = 0; i < ns->geom.pgnum; i++) {
+ if (ns->pages[i].byte)
+ kmem_cache_free(ns->nand_pages_slab,
+ ns->pages[i].byte);
+ }
+ kmem_cache_destroy(ns->nand_pages_slab);
+ vfree(ns->pages);
+ }
+}
+
+static char *get_partition_name(int i)
+{
+ return kasprintf(GFP_KERNEL, "NAND simulator partition %d", i);
+}
+
+/*
+ * Initialize the nandsim structure.
+ *
+ * RETURNS: 0 if success, -ERRNO if failure.
+ */
+static int init_nandsim(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct nandsim *ns = chip->priv;
+ int i, ret = 0;
+ uint64_t remains;
+ uint64_t next_offset;
+
+ if (NS_IS_INITIALIZED(ns)) {
+ NS_ERR("init_nandsim: nandsim is already initialized\n");
+ return -EIO;
+ }
+
+ /* Force mtd to not do delays */
+ chip->chip_delay = 0;
+
+ /* Initialize the NAND flash parameters */
+ ns->busw = chip->options & NAND_BUSWIDTH_16 ? 16 : 8;
+ ns->geom.totsz = mtd->size;
+ ns->geom.pgsz = mtd->writesize;
+ ns->geom.oobsz = mtd->oobsize;
+ ns->geom.secsz = mtd->erasesize;
+ ns->geom.pgszoob = ns->geom.pgsz + ns->geom.oobsz;
+ ns->geom.pgnum = div_u64(ns->geom.totsz, ns->geom.pgsz);
+ ns->geom.totszoob = ns->geom.totsz + (uint64_t)ns->geom.pgnum * ns->geom.oobsz;
+ ns->geom.secshift = ffs(ns->geom.secsz) - 1;
+ ns->geom.pgshift = chip->page_shift;
+ ns->geom.pgsec = ns->geom.secsz / ns->geom.pgsz;
+ ns->geom.secszoob = ns->geom.secsz + ns->geom.oobsz * ns->geom.pgsec;
+ ns->options = 0;
+
+ if (ns->geom.pgsz == 512) {
+ ns->options |= OPT_PAGE512;
+ if (ns->busw == 8)
+ ns->options |= OPT_PAGE512_8BIT;
+ } else if (ns->geom.pgsz == 2048) {
+ ns->options |= OPT_PAGE2048;
+ } else if (ns->geom.pgsz == 4096) {
+ ns->options |= OPT_PAGE4096;
+ } else {
+ NS_ERR("init_nandsim: unknown page size %u\n", ns->geom.pgsz);
+ return -EIO;
+ }
+
+ if (ns->options & OPT_SMALLPAGE) {
+ if (ns->geom.totsz <= (32 << 20)) {
+ ns->geom.pgaddrbytes = 3;
+ ns->geom.secaddrbytes = 2;
+ } else {
+ ns->geom.pgaddrbytes = 4;
+ ns->geom.secaddrbytes = 3;
+ }
+ } else {
+ if (ns->geom.totsz <= (128 << 20)) {
+ ns->geom.pgaddrbytes = 4;
+ ns->geom.secaddrbytes = 2;
+ } else {
+ ns->geom.pgaddrbytes = 5;
+ ns->geom.secaddrbytes = 3;
+ }
+ }
+
+ /* Fill the partition_info structure */
+ if (parts_num > ARRAY_SIZE(ns->partitions)) {
+ NS_ERR("too many partitions.\n");
+ return -EINVAL;
+ }
+ remains = ns->geom.totsz;
+ next_offset = 0;
+ for (i = 0; i < parts_num; ++i) {
+ uint64_t part_sz = (uint64_t)parts[i] * ns->geom.secsz;
+
+ if (!part_sz || part_sz > remains) {
+ NS_ERR("bad partition size.\n");
+ return -EINVAL;
+ }
+ ns->partitions[i].name = get_partition_name(i);
+ if (!ns->partitions[i].name) {
+ NS_ERR("unable to allocate memory.\n");
+ return -ENOMEM;
+ }
+ ns->partitions[i].offset = next_offset;
+ ns->partitions[i].size = part_sz;
+ next_offset += ns->partitions[i].size;
+ remains -= ns->partitions[i].size;
+ }
+ ns->nbparts = parts_num;
+ if (remains) {
+ if (parts_num + 1 > ARRAY_SIZE(ns->partitions)) {
+ NS_ERR("too many partitions.\n");
+ return -EINVAL;
+ }
+ ns->partitions[i].name = get_partition_name(i);
+ if (!ns->partitions[i].name) {
+ NS_ERR("unable to allocate memory.\n");
+ return -ENOMEM;
+ }
+ ns->partitions[i].offset = next_offset;
+ ns->partitions[i].size = remains;
+ ns->nbparts += 1;
+ }
+
+ if (ns->busw == 16)
+ NS_WARN("16-bit flashes support wasn't tested\n");
+
+ printk("flash size: %llu MiB\n",
+ (unsigned long long)ns->geom.totsz >> 20);
+ printk("page size: %u bytes\n", ns->geom.pgsz);
+ printk("OOB area size: %u bytes\n", ns->geom.oobsz);
+ printk("sector size: %u KiB\n", ns->geom.secsz >> 10);
+ printk("pages number: %u\n", ns->geom.pgnum);
+ printk("pages per sector: %u\n", ns->geom.pgsec);
+ printk("bus width: %u\n", ns->busw);
+ printk("bits in sector size: %u\n", ns->geom.secshift);
+ printk("bits in page size: %u\n", ns->geom.pgshift);
+ printk("bits in OOB size: %u\n", ffs(ns->geom.oobsz) - 1);
+ printk("flash size with OOB: %llu KiB\n",
+ (unsigned long long)ns->geom.totszoob >> 10);
+ printk("page address bytes: %u\n", ns->geom.pgaddrbytes);
+ printk("sector address bytes: %u\n", ns->geom.secaddrbytes);
+ printk("options: %#x\n", ns->options);
+
+ if ((ret = alloc_device(ns)) != 0)
+ return ret;
+
+ /* Allocate / initialize the internal buffer */
+ ns->buf.byte = kmalloc(ns->geom.pgszoob, GFP_KERNEL);
+ if (!ns->buf.byte) {
+ NS_ERR("init_nandsim: unable to allocate %u bytes for the internal buffer\n",
+ ns->geom.pgszoob);
+ return -ENOMEM;
+ }
+ memset(ns->buf.byte, 0xFF, ns->geom.pgszoob);
+
+ return 0;
+}
+
+/*
+ * Free the nandsim structure.
+ */
+static void free_nandsim(struct nandsim *ns)
+{
+ kfree(ns->buf.byte);
+ free_device(ns);
+
+ return;
+}
+
+static int parse_badblocks(struct nandsim *ns, struct mtd_info *mtd)
+{
+ char *w;
+ int zero_ok;
+ unsigned int erase_block_no;
+ loff_t offset;
+
+ if (!badblocks)
+ return 0;
+ w = badblocks;
+ do {
+ zero_ok = (*w == '0' ? 1 : 0);
+ erase_block_no = simple_strtoul(w, &w, 0);
+ if (!zero_ok && !erase_block_no) {
+ NS_ERR("invalid badblocks.\n");
+ return -EINVAL;
+ }
+ offset = (loff_t)erase_block_no * ns->geom.secsz;
+ if (mtd_block_markbad(mtd, offset)) {
+ NS_ERR("invalid badblocks.\n");
+ return -EINVAL;
+ }
+ if (*w == ',')
+ w += 1;
+ } while (*w);
+ return 0;
+}
+
+static int parse_weakblocks(void)
+{
+ char *w;
+ int zero_ok;
+ unsigned int erase_block_no;
+ unsigned int max_erases;
+ struct weak_block *wb;
+
+ if (!weakblocks)
+ return 0;
+ w = weakblocks;
+ do {
+ zero_ok = (*w == '0' ? 1 : 0);
+ erase_block_no = simple_strtoul(w, &w, 0);
+ if (!zero_ok && !erase_block_no) {
+ NS_ERR("invalid weakblocks.\n");
+ return -EINVAL;
+ }
+ max_erases = 3;
+ if (*w == ':') {
+ w += 1;
+ max_erases = simple_strtoul(w, &w, 0);
+ }
+ if (*w == ',')
+ w += 1;
+ wb = kzalloc(sizeof(*wb), GFP_KERNEL);
+ if (!wb) {
+ NS_ERR("unable to allocate memory.\n");
+ return -ENOMEM;
+ }
+ wb->erase_block_no = erase_block_no;
+ wb->max_erases = max_erases;
+ list_add(&wb->list, &weak_blocks);
+ } while (*w);
+ return 0;
+}
+
+static int erase_error(unsigned int erase_block_no)
+{
+ struct weak_block *wb;
+
+ list_for_each_entry(wb, &weak_blocks, list)
+ if (wb->erase_block_no == erase_block_no) {
+ if (wb->erases_done >= wb->max_erases)
+ return 1;
+ wb->erases_done += 1;
+ return 0;
+ }
+ return 0;
+}
+
+static int parse_weakpages(void)
+{
+ char *w;
+ int zero_ok;
+ unsigned int page_no;
+ unsigned int max_writes;
+ struct weak_page *wp;
+
+ if (!weakpages)
+ return 0;
+ w = weakpages;
+ do {
+ zero_ok = (*w == '0' ? 1 : 0);
+ page_no = simple_strtoul(w, &w, 0);
+ if (!zero_ok && !page_no) {
+ NS_ERR("invalid weakpagess.\n");
+ return -EINVAL;
+ }
+ max_writes = 3;
+ if (*w == ':') {
+ w += 1;
+ max_writes = simple_strtoul(w, &w, 0);
+ }
+ if (*w == ',')
+ w += 1;
+ wp = kzalloc(sizeof(*wp), GFP_KERNEL);
+ if (!wp) {
+ NS_ERR("unable to allocate memory.\n");
+ return -ENOMEM;
+ }
+ wp->page_no = page_no;
+ wp->max_writes = max_writes;
+ list_add(&wp->list, &weak_pages);
+ } while (*w);
+ return 0;
+}
+
+static int write_error(unsigned int page_no)
+{
+ struct weak_page *wp;
+
+ list_for_each_entry(wp, &weak_pages, list)
+ if (wp->page_no == page_no) {
+ if (wp->writes_done >= wp->max_writes)
+ return 1;
+ wp->writes_done += 1;
+ return 0;
+ }
+ return 0;
+}
+
+static int parse_gravepages(void)
+{
+ char *g;
+ int zero_ok;
+ unsigned int page_no;
+ unsigned int max_reads;
+ struct grave_page *gp;
+
+ if (!gravepages)
+ return 0;
+ g = gravepages;
+ do {
+ zero_ok = (*g == '0' ? 1 : 0);
+ page_no = simple_strtoul(g, &g, 0);
+ if (!zero_ok && !page_no) {
+ NS_ERR("invalid gravepagess.\n");
+ return -EINVAL;
+ }
+ max_reads = 3;
+ if (*g == ':') {
+ g += 1;
+ max_reads = simple_strtoul(g, &g, 0);
+ }
+ if (*g == ',')
+ g += 1;
+ gp = kzalloc(sizeof(*gp), GFP_KERNEL);
+ if (!gp) {
+ NS_ERR("unable to allocate memory.\n");
+ return -ENOMEM;
+ }
+ gp->page_no = page_no;
+ gp->max_reads = max_reads;
+ list_add(&gp->list, &grave_pages);
+ } while (*g);
+ return 0;
+}
+
+static int read_error(unsigned int page_no)
+{
+ struct grave_page *gp;
+
+ list_for_each_entry(gp, &grave_pages, list)
+ if (gp->page_no == page_no) {
+ if (gp->reads_done >= gp->max_reads)
+ return 1;
+ gp->reads_done += 1;
+ return 0;
+ }
+ return 0;
+}
+
+static void free_lists(void)
+{
+ struct list_head *pos, *n;
+ list_for_each_safe(pos, n, &weak_blocks) {
+ list_del(pos);
+ kfree(list_entry(pos, struct weak_block, list));
+ }
+ list_for_each_safe(pos, n, &weak_pages) {
+ list_del(pos);
+ kfree(list_entry(pos, struct weak_page, list));
+ }
+ list_for_each_safe(pos, n, &grave_pages) {
+ list_del(pos);
+ kfree(list_entry(pos, struct grave_page, list));
+ }
+ kfree(erase_block_wear);
+}
+
+static int setup_wear_reporting(struct mtd_info *mtd)
+{
+ size_t mem;
+
+ wear_eb_count = div_u64(mtd->size, mtd->erasesize);
+ mem = wear_eb_count * sizeof(unsigned long);
+ if (mem / sizeof(unsigned long) != wear_eb_count) {
+ NS_ERR("Too many erase blocks for wear reporting\n");
+ return -ENOMEM;
+ }
+ erase_block_wear = kzalloc(mem, GFP_KERNEL);
+ if (!erase_block_wear) {
+ NS_ERR("Too many erase blocks for wear reporting\n");
+ return -ENOMEM;
+ }
+ return 0;
+}
+
+static void update_wear(unsigned int erase_block_no)
+{
+ if (!erase_block_wear)
+ return;
+ total_wear += 1;
+ /*
+ * TODO: Notify this through a debugfs entry,
+ * instead of showing an error message.
+ */
+ if (total_wear == 0)
+ NS_ERR("Erase counter total overflow\n");
+ erase_block_wear[erase_block_no] += 1;
+ if (erase_block_wear[erase_block_no] == 0)
+ NS_ERR("Erase counter overflow for erase block %u\n", erase_block_no);
+}
+
+/*
+ * Returns the string representation of 'state' state.
+ */
+static char *get_state_name(uint32_t state)
+{
+ switch (NS_STATE(state)) {
+ case STATE_CMD_READ0:
+ return "STATE_CMD_READ0";
+ case STATE_CMD_READ1:
+ return "STATE_CMD_READ1";
+ case STATE_CMD_PAGEPROG:
+ return "STATE_CMD_PAGEPROG";
+ case STATE_CMD_READOOB:
+ return "STATE_CMD_READOOB";
+ case STATE_CMD_READSTART:
+ return "STATE_CMD_READSTART";
+ case STATE_CMD_ERASE1:
+ return "STATE_CMD_ERASE1";
+ case STATE_CMD_STATUS:
+ return "STATE_CMD_STATUS";
+ case STATE_CMD_SEQIN:
+ return "STATE_CMD_SEQIN";
+ case STATE_CMD_READID:
+ return "STATE_CMD_READID";
+ case STATE_CMD_ERASE2:
+ return "STATE_CMD_ERASE2";
+ case STATE_CMD_RESET:
+ return "STATE_CMD_RESET";
+ case STATE_CMD_RNDOUT:
+ return "STATE_CMD_RNDOUT";
+ case STATE_CMD_RNDOUTSTART:
+ return "STATE_CMD_RNDOUTSTART";
+ case STATE_ADDR_PAGE:
+ return "STATE_ADDR_PAGE";
+ case STATE_ADDR_SEC:
+ return "STATE_ADDR_SEC";
+ case STATE_ADDR_ZERO:
+ return "STATE_ADDR_ZERO";
+ case STATE_ADDR_COLUMN:
+ return "STATE_ADDR_COLUMN";
+ case STATE_DATAIN:
+ return "STATE_DATAIN";
+ case STATE_DATAOUT:
+ return "STATE_DATAOUT";
+ case STATE_DATAOUT_ID:
+ return "STATE_DATAOUT_ID";
+ case STATE_DATAOUT_STATUS:
+ return "STATE_DATAOUT_STATUS";
+ case STATE_READY:
+ return "STATE_READY";
+ case STATE_UNKNOWN:
+ return "STATE_UNKNOWN";
+ }
+
+ NS_ERR("get_state_name: unknown state, BUG\n");
+ return NULL;
+}
+
+/*
+ * Check if command is valid.
+ *
+ * RETURNS: 1 if wrong command, 0 if right.
+ */
+static int check_command(int cmd)
+{
+ switch (cmd) {
+
+ case NAND_CMD_READ0:
+ case NAND_CMD_READ1:
+ case NAND_CMD_READSTART:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_READOOB:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_STATUS:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_READID:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_RESET:
+ case NAND_CMD_RNDOUT:
+ case NAND_CMD_RNDOUTSTART:
+ return 0;
+
+ default:
+ return 1;
+ }
+}
+
+/*
+ * Returns state after command is accepted by command number.
+ */
+static uint32_t get_state_by_command(unsigned command)
+{
+ switch (command) {
+ case NAND_CMD_READ0:
+ return STATE_CMD_READ0;
+ case NAND_CMD_READ1:
+ return STATE_CMD_READ1;
+ case NAND_CMD_PAGEPROG:
+ return STATE_CMD_PAGEPROG;
+ case NAND_CMD_READSTART:
+ return STATE_CMD_READSTART;
+ case NAND_CMD_READOOB:
+ return STATE_CMD_READOOB;
+ case NAND_CMD_ERASE1:
+ return STATE_CMD_ERASE1;
+ case NAND_CMD_STATUS:
+ return STATE_CMD_STATUS;
+ case NAND_CMD_SEQIN:
+ return STATE_CMD_SEQIN;
+ case NAND_CMD_READID:
+ return STATE_CMD_READID;
+ case NAND_CMD_ERASE2:
+ return STATE_CMD_ERASE2;
+ case NAND_CMD_RESET:
+ return STATE_CMD_RESET;
+ case NAND_CMD_RNDOUT:
+ return STATE_CMD_RNDOUT;
+ case NAND_CMD_RNDOUTSTART:
+ return STATE_CMD_RNDOUTSTART;
+ }
+
+ NS_ERR("get_state_by_command: unknown command, BUG\n");
+ return 0;
+}
+
+/*
+ * Move an address byte to the correspondent internal register.
+ */
+static inline void accept_addr_byte(struct nandsim *ns, u_char bt)
+{
+ uint byte = (uint)bt;
+
+ if (ns->regs.count < (ns->geom.pgaddrbytes - ns->geom.secaddrbytes))
+ ns->regs.column |= (byte << 8 * ns->regs.count);
+ else {
+ ns->regs.row |= (byte << 8 * (ns->regs.count -
+ ns->geom.pgaddrbytes +
+ ns->geom.secaddrbytes));
+ }
+
+ return;
+}
+
+/*
+ * Switch to STATE_READY state.
+ */
+static inline void switch_to_ready_state(struct nandsim *ns, u_char status)
+{
+ NS_DBG("switch_to_ready_state: switch to %s state\n", get_state_name(STATE_READY));
+
+ ns->state = STATE_READY;
+ ns->nxstate = STATE_UNKNOWN;
+ ns->op = NULL;
+ ns->npstates = 0;
+ ns->stateidx = 0;
+ ns->regs.num = 0;
+ ns->regs.count = 0;
+ ns->regs.off = 0;
+ ns->regs.row = 0;
+ ns->regs.column = 0;
+ ns->regs.status = status;
+}
+
+/*
+ * If the operation isn't known yet, try to find it in the global array
+ * of supported operations.
+ *
+ * Operation can be unknown because of the following.
+ * 1. New command was accepted and this is the first call to find the
+ * correspondent states chain. In this case ns->npstates = 0;
+ * 2. There are several operations which begin with the same command(s)
+ * (for example program from the second half and read from the
+ * second half operations both begin with the READ1 command). In this
+ * case the ns->pstates[] array contains previous states.
+ *
+ * Thus, the function tries to find operation containing the following
+ * states (if the 'flag' parameter is 0):
+ * ns->pstates[0], ... ns->pstates[ns->npstates], ns->state
+ *
+ * If (one and only one) matching operation is found, it is accepted (
+ * ns->ops, ns->state, ns->nxstate are initialized, ns->npstate is
+ * zeroed).
+ *
+ * If there are several matches, the current state is pushed to the
+ * ns->pstates.
+ *
+ * The operation can be unknown only while commands are input to the chip.
+ * As soon as address command is accepted, the operation must be known.
+ * In such situation the function is called with 'flag' != 0, and the
+ * operation is searched using the following pattern:
+ * ns->pstates[0], ... ns->pstates[ns->npstates], <address input>
+ *
+ * It is supposed that this pattern must either match one operation or
+ * none. There can't be ambiguity in that case.
+ *
+ * If no matches found, the function does the following:
+ * 1. if there are saved states present, try to ignore them and search
+ * again only using the last command. If nothing was found, switch
+ * to the STATE_READY state.
+ * 2. if there are no saved states, switch to the STATE_READY state.
+ *
+ * RETURNS: -2 - no matched operations found.
+ * -1 - several matches.
+ * 0 - operation is found.
+ */
+static int find_operation(struct nandsim *ns, uint32_t flag)
+{
+ int opsfound = 0;
+ int i, j, idx = 0;
+
+ for (i = 0; i < NS_OPER_NUM; i++) {
+
+ int found = 1;
+
+ if (!(ns->options & ops[i].reqopts))
+ /* Ignore operations we can't perform */
+ continue;
+
+ if (flag) {
+ if (!(ops[i].states[ns->npstates] & STATE_ADDR_MASK))
+ continue;
+ } else {
+ if (NS_STATE(ns->state) != NS_STATE(ops[i].states[ns->npstates]))
+ continue;
+ }
+
+ for (j = 0; j < ns->npstates; j++)
+ if (NS_STATE(ops[i].states[j]) != NS_STATE(ns->pstates[j])
+ && (ns->options & ops[idx].reqopts)) {
+ found = 0;
+ break;
+ }
+
+ if (found) {
+ idx = i;
+ opsfound += 1;
+ }
+ }
+
+ if (opsfound == 1) {
+ /* Exact match */
+ ns->op = &ops[idx].states[0];
+ if (flag) {
+ /*
+ * In this case the find_operation function was
+ * called when address has just began input. But it isn't
+ * yet fully input and the current state must
+ * not be one of STATE_ADDR_*, but the STATE_ADDR_*
+ * state must be the next state (ns->nxstate).
+ */
+ ns->stateidx = ns->npstates - 1;
+ } else {
+ ns->stateidx = ns->npstates;
+ }
+ ns->npstates = 0;
+ ns->state = ns->op[ns->stateidx];
+ ns->nxstate = ns->op[ns->stateidx + 1];
+ NS_DBG("find_operation: operation found, index: %d, state: %s, nxstate %s\n",
+ idx, get_state_name(ns->state), get_state_name(ns->nxstate));
+ return 0;
+ }
+
+ if (opsfound == 0) {
+ /* Nothing was found. Try to ignore previous commands (if any) and search again */
+ if (ns->npstates != 0) {
+ NS_DBG("find_operation: no operation found, try again with state %s\n",
+ get_state_name(ns->state));
+ ns->npstates = 0;
+ return find_operation(ns, 0);
+
+ }
+ NS_DBG("find_operation: no operations found\n");
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ return -2;
+ }
+
+ if (flag) {
+ /* This shouldn't happen */
+ NS_DBG("find_operation: BUG, operation must be known if address is input\n");
+ return -2;
+ }
+
+ NS_DBG("find_operation: there is still ambiguity\n");
+
+ ns->pstates[ns->npstates++] = ns->state;
+
+ return -1;
+}
+
+static void put_pages(struct nandsim *ns)
+{
+ int i;
+
+ for (i = 0; i < ns->held_cnt; i++)
+ page_cache_release(ns->held_pages[i]);
+}
+
+/* Get page cache pages in advance to provide NOFS memory allocation */
+static int get_pages(struct nandsim *ns, struct file *file, size_t count, loff_t pos)
+{
+ pgoff_t index, start_index, end_index;
+ struct page *page;
+ struct address_space *mapping = file->f_mapping;
+
+ start_index = pos >> PAGE_CACHE_SHIFT;
+ end_index = (pos + count - 1) >> PAGE_CACHE_SHIFT;
+ if (end_index - start_index + 1 > NS_MAX_HELD_PAGES)
+ return -EINVAL;
+ ns->held_cnt = 0;
+ for (index = start_index; index <= end_index; index++) {
+ page = find_get_page(mapping, index);
+ if (page == NULL) {
+ page = find_or_create_page(mapping, index, GFP_NOFS);
+ if (page == NULL) {
+ write_inode_now(mapping->host, 1);
+ page = find_or_create_page(mapping, index, GFP_NOFS);
+ }
+ if (page == NULL) {
+ put_pages(ns);
+ return -ENOMEM;
+ }
+ unlock_page(page);
+ }
+ ns->held_pages[ns->held_cnt++] = page;
+ }
+ return 0;
+}
+
+static int set_memalloc(void)
+{
+ if (current->flags & PF_MEMALLOC)
+ return 0;
+ current->flags |= PF_MEMALLOC;
+ return 1;
+}
+
+static void clear_memalloc(int memalloc)
+{
+ if (memalloc)
+ current->flags &= ~PF_MEMALLOC;
+}
+
+static ssize_t read_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t pos)
+{
+ ssize_t tx;
+ int err, memalloc;
+
+ err = get_pages(ns, file, count, pos);
+ if (err)
+ return err;
+ memalloc = set_memalloc();
+ tx = kernel_read(file, pos, buf, count);
+ clear_memalloc(memalloc);
+ put_pages(ns);
+ return tx;
+}
+
+static ssize_t write_file(struct nandsim *ns, struct file *file, void *buf, size_t count, loff_t pos)
+{
+ ssize_t tx;
+ int err, memalloc;
+
+ err = get_pages(ns, file, count, pos);
+ if (err)
+ return err;
+ memalloc = set_memalloc();
+ tx = kernel_write(file, buf, count, pos);
+ clear_memalloc(memalloc);
+ put_pages(ns);
+ return tx;
+}
+
+/*
+ * Returns a pointer to the current page.
+ */
+static inline union ns_mem *NS_GET_PAGE(struct nandsim *ns)
+{
+ return &(ns->pages[ns->regs.row]);
+}
+
+/*
+ * Retuns a pointer to the current byte, within the current page.
+ */
+static inline u_char *NS_PAGE_BYTE_OFF(struct nandsim *ns)
+{
+ return NS_GET_PAGE(ns)->byte + ns->regs.column + ns->regs.off;
+}
+
+static int do_read_error(struct nandsim *ns, int num)
+{
+ unsigned int page_no = ns->regs.row;
+
+ if (read_error(page_no)) {
+ prandom_bytes(ns->buf.byte, num);
+ NS_WARN("simulating read error in page %u\n", page_no);
+ return 1;
+ }
+ return 0;
+}
+
+static void do_bit_flips(struct nandsim *ns, int num)
+{
+ if (bitflips && prandom_u32() < (1 << 22)) {
+ int flips = 1;
+ if (bitflips > 1)
+ flips = (prandom_u32() % (int) bitflips) + 1;
+ while (flips--) {
+ int pos = prandom_u32() % (num * 8);
+ ns->buf.byte[pos / 8] ^= (1 << (pos % 8));
+ NS_WARN("read_page: flipping bit %d in page %d "
+ "reading from %d ecc: corrected=%u failed=%u\n",
+ pos, ns->regs.row, ns->regs.column + ns->regs.off,
+ nsmtd->ecc_stats.corrected, nsmtd->ecc_stats.failed);
+ }
+ }
+}
+
+/*
+ * Fill the NAND buffer with data read from the specified page.
+ */
+static void read_page(struct nandsim *ns, int num)
+{
+ union ns_mem *mypage;
+
+ if (ns->cfile) {
+ if (!test_bit(ns->regs.row, ns->pages_written)) {
+ NS_DBG("read_page: page %d not written\n", ns->regs.row);
+ memset(ns->buf.byte, 0xFF, num);
+ } else {
+ loff_t pos;
+ ssize_t tx;
+
+ NS_DBG("read_page: page %d written, reading from %d\n",
+ ns->regs.row, ns->regs.column + ns->regs.off);
+ if (do_read_error(ns, num))
+ return;
+ pos = (loff_t)NS_RAW_OFFSET(ns) + ns->regs.off;
+ tx = read_file(ns, ns->cfile, ns->buf.byte, num, pos);
+ if (tx != num) {
+ NS_ERR("read_page: read error for page %d ret %ld\n", ns->regs.row, (long)tx);
+ return;
+ }
+ do_bit_flips(ns, num);
+ }
+ return;
+ }
+
+ mypage = NS_GET_PAGE(ns);
+ if (mypage->byte == NULL) {
+ NS_DBG("read_page: page %d not allocated\n", ns->regs.row);
+ memset(ns->buf.byte, 0xFF, num);
+ } else {
+ NS_DBG("read_page: page %d allocated, reading from %d\n",
+ ns->regs.row, ns->regs.column + ns->regs.off);
+ if (do_read_error(ns, num))
+ return;
+ memcpy(ns->buf.byte, NS_PAGE_BYTE_OFF(ns), num);
+ do_bit_flips(ns, num);
+ }
+}
+
+/*
+ * Erase all pages in the specified sector.
+ */
+static void erase_sector(struct nandsim *ns)
+{
+ union ns_mem *mypage;
+ int i;
+
+ if (ns->cfile) {
+ for (i = 0; i < ns->geom.pgsec; i++)
+ if (__test_and_clear_bit(ns->regs.row + i,
+ ns->pages_written)) {
+ NS_DBG("erase_sector: freeing page %d\n", ns->regs.row + i);
+ }
+ return;
+ }
+
+ mypage = NS_GET_PAGE(ns);
+ for (i = 0; i < ns->geom.pgsec; i++) {
+ if (mypage->byte != NULL) {
+ NS_DBG("erase_sector: freeing page %d\n", ns->regs.row+i);
+ kmem_cache_free(ns->nand_pages_slab, mypage->byte);
+ mypage->byte = NULL;
+ }
+ mypage++;
+ }
+}
+
+/*
+ * Program the specified page with the contents from the NAND buffer.
+ */
+static int prog_page(struct nandsim *ns, int num)
+{
+ int i;
+ union ns_mem *mypage;
+ u_char *pg_off;
+
+ if (ns->cfile) {
+ loff_t off;
+ ssize_t tx;
+ int all;
+
+ NS_DBG("prog_page: writing page %d\n", ns->regs.row);
+ pg_off = ns->file_buf + ns->regs.column + ns->regs.off;
+ off = (loff_t)NS_RAW_OFFSET(ns) + ns->regs.off;
+ if (!test_bit(ns->regs.row, ns->pages_written)) {
+ all = 1;
+ memset(ns->file_buf, 0xff, ns->geom.pgszoob);
+ } else {
+ all = 0;
+ tx = read_file(ns, ns->cfile, pg_off, num, off);
+ if (tx != num) {
+ NS_ERR("prog_page: read error for page %d ret %ld\n", ns->regs.row, (long)tx);
+ return -1;
+ }
+ }
+ for (i = 0; i < num; i++)
+ pg_off[i] &= ns->buf.byte[i];
+ if (all) {
+ loff_t pos = (loff_t)ns->regs.row * ns->geom.pgszoob;
+ tx = write_file(ns, ns->cfile, ns->file_buf, ns->geom.pgszoob, pos);
+ if (tx != ns->geom.pgszoob) {
+ NS_ERR("prog_page: write error for page %d ret %ld\n", ns->regs.row, (long)tx);
+ return -1;
+ }
+ __set_bit(ns->regs.row, ns->pages_written);
+ } else {
+ tx = write_file(ns, ns->cfile, pg_off, num, off);
+ if (tx != num) {
+ NS_ERR("prog_page: write error for page %d ret %ld\n", ns->regs.row, (long)tx);
+ return -1;
+ }
+ }
+ return 0;
+ }
+
+ mypage = NS_GET_PAGE(ns);
+ if (mypage->byte == NULL) {
+ NS_DBG("prog_page: allocating page %d\n", ns->regs.row);
+ /*
+ * We allocate memory with GFP_NOFS because a flash FS may
+ * utilize this. If it is holding an FS lock, then gets here,
+ * then kernel memory alloc runs writeback which goes to the FS
+ * again and deadlocks. This was seen in practice.
+ */
+ mypage->byte = kmem_cache_alloc(ns->nand_pages_slab, GFP_NOFS);
+ if (mypage->byte == NULL) {
+ NS_ERR("prog_page: error allocating memory for page %d\n", ns->regs.row);
+ return -1;
+ }
+ memset(mypage->byte, 0xFF, ns->geom.pgszoob);
+ }
+
+ pg_off = NS_PAGE_BYTE_OFF(ns);
+ for (i = 0; i < num; i++)
+ pg_off[i] &= ns->buf.byte[i];
+
+ return 0;
+}
+
+/*
+ * If state has any action bit, perform this action.
+ *
+ * RETURNS: 0 if success, -1 if error.
+ */
+static int do_state_action(struct nandsim *ns, uint32_t action)
+{
+ int num;
+ int busdiv = ns->busw == 8 ? 1 : 2;
+ unsigned int erase_block_no, page_no;
+
+ action &= ACTION_MASK;
+
+ /* Check that page address input is correct */
+ if (action != ACTION_SECERASE && ns->regs.row >= ns->geom.pgnum) {
+ NS_WARN("do_state_action: wrong page number (%#x)\n", ns->regs.row);
+ return -1;
+ }
+
+ switch (action) {
+
+ case ACTION_CPY:
+ /*
+ * Copy page data to the internal buffer.
+ */
+
+ /* Column shouldn't be very large */
+ if (ns->regs.column >= (ns->geom.pgszoob - ns->regs.off)) {
+ NS_ERR("do_state_action: column number is too large\n");
+ break;
+ }
+ num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
+ read_page(ns, num);
+
+ NS_DBG("do_state_action: (ACTION_CPY:) copy %d bytes to int buf, raw offset %d\n",
+ num, NS_RAW_OFFSET(ns) + ns->regs.off);
+
+ if (ns->regs.off == 0)
+ NS_LOG("read page %d\n", ns->regs.row);
+ else if (ns->regs.off < ns->geom.pgsz)
+ NS_LOG("read page %d (second half)\n", ns->regs.row);
+ else
+ NS_LOG("read OOB of page %d\n", ns->regs.row);
+
+ NS_UDELAY(access_delay);
+ NS_UDELAY(input_cycle * ns->geom.pgsz / 1000 / busdiv);
+
+ break;
+
+ case ACTION_SECERASE:
+ /*
+ * Erase sector.
+ */
+
+ if (ns->lines.wp) {
+ NS_ERR("do_state_action: device is write-protected, ignore sector erase\n");
+ return -1;
+ }
+
+ if (ns->regs.row >= ns->geom.pgnum - ns->geom.pgsec
+ || (ns->regs.row & ~(ns->geom.secsz - 1))) {
+ NS_ERR("do_state_action: wrong sector address (%#x)\n", ns->regs.row);
+ return -1;
+ }
+
+ ns->regs.row = (ns->regs.row <<
+ 8 * (ns->geom.pgaddrbytes - ns->geom.secaddrbytes)) | ns->regs.column;
+ ns->regs.column = 0;
+
+ erase_block_no = ns->regs.row >> (ns->geom.secshift - ns->geom.pgshift);
+
+ NS_DBG("do_state_action: erase sector at address %#x, off = %d\n",
+ ns->regs.row, NS_RAW_OFFSET(ns));
+ NS_LOG("erase sector %u\n", erase_block_no);
+
+ erase_sector(ns);
+
+ NS_MDELAY(erase_delay);
+
+ if (erase_block_wear)
+ update_wear(erase_block_no);
+
+ if (erase_error(erase_block_no)) {
+ NS_WARN("simulating erase failure in erase block %u\n", erase_block_no);
+ return -1;
+ }
+
+ break;
+
+ case ACTION_PRGPAGE:
+ /*
+ * Program page - move internal buffer data to the page.
+ */
+
+ if (ns->lines.wp) {
+ NS_WARN("do_state_action: device is write-protected, programm\n");
+ return -1;
+ }
+
+ num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
+ if (num != ns->regs.count) {
+ NS_ERR("do_state_action: too few bytes were input (%d instead of %d)\n",
+ ns->regs.count, num);
+ return -1;
+ }
+
+ if (prog_page(ns, num) == -1)
+ return -1;
+
+ page_no = ns->regs.row;
+
+ NS_DBG("do_state_action: copy %d bytes from int buf to (%#x, %#x), raw off = %d\n",
+ num, ns->regs.row, ns->regs.column, NS_RAW_OFFSET(ns) + ns->regs.off);
+ NS_LOG("programm page %d\n", ns->regs.row);
+
+ NS_UDELAY(programm_delay);
+ NS_UDELAY(output_cycle * ns->geom.pgsz / 1000 / busdiv);
+
+ if (write_error(page_no)) {
+ NS_WARN("simulating write failure in page %u\n", page_no);
+ return -1;
+ }
+
+ break;
+
+ case ACTION_ZEROOFF:
+ NS_DBG("do_state_action: set internal offset to 0\n");
+ ns->regs.off = 0;
+ break;
+
+ case ACTION_HALFOFF:
+ if (!(ns->options & OPT_PAGE512_8BIT)) {
+ NS_ERR("do_state_action: BUG! can't skip half of page for non-512"
+ "byte page size 8x chips\n");
+ return -1;
+ }
+ NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz/2);
+ ns->regs.off = ns->geom.pgsz/2;
+ break;
+
+ case ACTION_OOBOFF:
+ NS_DBG("do_state_action: set internal offset to %d\n", ns->geom.pgsz);
+ ns->regs.off = ns->geom.pgsz;
+ break;
+
+ default:
+ NS_DBG("do_state_action: BUG! unknown action\n");
+ }
+
+ return 0;
+}
+
+/*
+ * Switch simulator's state.
+ */
+static void switch_state(struct nandsim *ns)
+{
+ if (ns->op) {
+ /*
+ * The current operation have already been identified.
+ * Just follow the states chain.
+ */
+
+ ns->stateidx += 1;
+ ns->state = ns->nxstate;
+ ns->nxstate = ns->op[ns->stateidx + 1];
+
+ NS_DBG("switch_state: operation is known, switch to the next state, "
+ "state: %s, nxstate: %s\n",
+ get_state_name(ns->state), get_state_name(ns->nxstate));
+
+ /* See, whether we need to do some action */
+ if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ return;
+ }
+
+ } else {
+ /*
+ * We don't yet know which operation we perform.
+ * Try to identify it.
+ */
+
+ /*
+ * The only event causing the switch_state function to
+ * be called with yet unknown operation is new command.
+ */
+ ns->state = get_state_by_command(ns->regs.command);
+
+ NS_DBG("switch_state: operation is unknown, try to find it\n");
+
+ if (find_operation(ns, 0) != 0)
+ return;
+
+ if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ return;
+ }
+ }
+
+ /* For 16x devices column means the page offset in words */
+ if ((ns->nxstate & STATE_ADDR_MASK) && ns->busw == 16) {
+ NS_DBG("switch_state: double the column number for 16x device\n");
+ ns->regs.column <<= 1;
+ }
+
+ if (NS_STATE(ns->nxstate) == STATE_READY) {
+ /*
+ * The current state is the last. Return to STATE_READY
+ */
+
+ u_char status = NS_STATUS_OK(ns);
+
+ /* In case of data states, see if all bytes were input/output */
+ if ((ns->state & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK))
+ && ns->regs.count != ns->regs.num) {
+ NS_WARN("switch_state: not all bytes were processed, %d left\n",
+ ns->regs.num - ns->regs.count);
+ status = NS_STATUS_FAILED(ns);
+ }
+
+ NS_DBG("switch_state: operation complete, switch to STATE_READY state\n");
+
+ switch_to_ready_state(ns, status);
+
+ return;
+ } else if (ns->nxstate & (STATE_DATAIN_MASK | STATE_DATAOUT_MASK)) {
+ /*
+ * If the next state is data input/output, switch to it now
+ */
+
+ ns->state = ns->nxstate;
+ ns->nxstate = ns->op[++ns->stateidx + 1];
+ ns->regs.num = ns->regs.count = 0;
+
+ NS_DBG("switch_state: the next state is data I/O, switch, "
+ "state: %s, nxstate: %s\n",
+ get_state_name(ns->state), get_state_name(ns->nxstate));
+
+ /*
+ * Set the internal register to the count of bytes which
+ * are expected to be input or output
+ */
+ switch (NS_STATE(ns->state)) {
+ case STATE_DATAIN:
+ case STATE_DATAOUT:
+ ns->regs.num = ns->geom.pgszoob - ns->regs.off - ns->regs.column;
+ break;
+
+ case STATE_DATAOUT_ID:
+ ns->regs.num = ns->geom.idbytes;
+ break;
+
+ case STATE_DATAOUT_STATUS:
+ ns->regs.count = ns->regs.num = 0;
+ break;
+
+ default:
+ NS_ERR("switch_state: BUG! unknown data state\n");
+ }
+
+ } else if (ns->nxstate & STATE_ADDR_MASK) {
+ /*
+ * If the next state is address input, set the internal
+ * register to the number of expected address bytes
+ */
+
+ ns->regs.count = 0;
+
+ switch (NS_STATE(ns->nxstate)) {
+ case STATE_ADDR_PAGE:
+ ns->regs.num = ns->geom.pgaddrbytes;
+
+ break;
+ case STATE_ADDR_SEC:
+ ns->regs.num = ns->geom.secaddrbytes;
+ break;
+
+ case STATE_ADDR_ZERO:
+ ns->regs.num = 1;
+ break;
+
+ case STATE_ADDR_COLUMN:
+ /* Column address is always 2 bytes */
+ ns->regs.num = ns->geom.pgaddrbytes - ns->geom.secaddrbytes;
+ break;
+
+ default:
+ NS_ERR("switch_state: BUG! unknown address state\n");
+ }
+ } else {
+ /*
+ * Just reset internal counters.
+ */
+
+ ns->regs.num = 0;
+ ns->regs.count = 0;
+ }
+}
+
+static u_char ns_nand_read_byte(struct mtd_info *mtd)
+{
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
+ u_char outb = 0x00;
+
+ /* Sanity and correctness checks */
+ if (!ns->lines.ce) {
+ NS_ERR("read_byte: chip is disabled, return %#x\n", (uint)outb);
+ return outb;
+ }
+ if (ns->lines.ale || ns->lines.cle) {
+ NS_ERR("read_byte: ALE or CLE pin is high, return %#x\n", (uint)outb);
+ return outb;
+ }
+ if (!(ns->state & STATE_DATAOUT_MASK)) {
+ NS_WARN("read_byte: unexpected data output cycle, state is %s "
+ "return %#x\n", get_state_name(ns->state), (uint)outb);
+ return outb;
+ }
+
+ /* Status register may be read as many times as it is wanted */
+ if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS) {
+ NS_DBG("read_byte: return %#x status\n", ns->regs.status);
+ return ns->regs.status;
+ }
+
+ /* Check if there is any data in the internal buffer which may be read */
+ if (ns->regs.count == ns->regs.num) {
+ NS_WARN("read_byte: no more data to output, return %#x\n", (uint)outb);
+ return outb;
+ }
+
+ switch (NS_STATE(ns->state)) {
+ case STATE_DATAOUT:
+ if (ns->busw == 8) {
+ outb = ns->buf.byte[ns->regs.count];
+ ns->regs.count += 1;
+ } else {
+ outb = (u_char)cpu_to_le16(ns->buf.word[ns->regs.count >> 1]);
+ ns->regs.count += 2;
+ }
+ break;
+ case STATE_DATAOUT_ID:
+ NS_DBG("read_byte: read ID byte %d, total = %d\n", ns->regs.count, ns->regs.num);
+ outb = ns->ids[ns->regs.count];
+ ns->regs.count += 1;
+ break;
+ default:
+ BUG();
+ }
+
+ if (ns->regs.count == ns->regs.num) {
+ NS_DBG("read_byte: all bytes were read\n");
+
+ if (NS_STATE(ns->nxstate) == STATE_READY)
+ switch_state(ns);
+ }
+
+ return outb;
+}
+
+static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
+{
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
+
+ /* Sanity and correctness checks */
+ if (!ns->lines.ce) {
+ NS_ERR("write_byte: chip is disabled, ignore write\n");
+ return;
+ }
+ if (ns->lines.ale && ns->lines.cle) {
+ NS_ERR("write_byte: ALE and CLE pins are high simultaneously, ignore write\n");
+ return;
+ }
+
+ if (ns->lines.cle == 1) {
+ /*
+ * The byte written is a command.
+ */
+
+ if (byte == NAND_CMD_RESET) {
+ NS_LOG("reset chip\n");
+ switch_to_ready_state(ns, NS_STATUS_OK(ns));
+ return;
+ }
+
+ /* Check that the command byte is correct */
+ if (check_command(byte)) {
+ NS_ERR("write_byte: unknown command %#x\n", (uint)byte);
+ return;
+ }
+
+ if (NS_STATE(ns->state) == STATE_DATAOUT_STATUS
+ || NS_STATE(ns->state) == STATE_DATAOUT) {
+ int row = ns->regs.row;
+
+ switch_state(ns);
+ if (byte == NAND_CMD_RNDOUT)
+ ns->regs.row = row;
+ }
+
+ /* Check if chip is expecting command */
+ if (NS_STATE(ns->nxstate) != STATE_UNKNOWN && !(ns->nxstate & STATE_CMD_MASK)) {
+ /* Do not warn if only 2 id bytes are read */
+ if (!(ns->regs.command == NAND_CMD_READID &&
+ NS_STATE(ns->state) == STATE_DATAOUT_ID && ns->regs.count == 2)) {
+ /*
+ * We are in situation when something else (not command)
+ * was expected but command was input. In this case ignore
+ * previous command(s)/state(s) and accept the last one.
+ */
+ NS_WARN("write_byte: command (%#x) wasn't expected, expected state is %s, "
+ "ignore previous states\n", (uint)byte, get_state_name(ns->nxstate));
+ }
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ }
+
+ NS_DBG("command byte corresponding to %s state accepted\n",
+ get_state_name(get_state_by_command(byte)));
+ ns->regs.command = byte;
+ switch_state(ns);
+
+ } else if (ns->lines.ale == 1) {
+ /*
+ * The byte written is an address.
+ */
+
+ if (NS_STATE(ns->nxstate) == STATE_UNKNOWN) {
+
+ NS_DBG("write_byte: operation isn't known yet, identify it\n");
+
+ if (find_operation(ns, 1) < 0)
+ return;
+
+ if ((ns->state & ACTION_MASK) && do_state_action(ns, ns->state) < 0) {
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ return;
+ }
+
+ ns->regs.count = 0;
+ switch (NS_STATE(ns->nxstate)) {
+ case STATE_ADDR_PAGE:
+ ns->regs.num = ns->geom.pgaddrbytes;
+ break;
+ case STATE_ADDR_SEC:
+ ns->regs.num = ns->geom.secaddrbytes;
+ break;
+ case STATE_ADDR_ZERO:
+ ns->regs.num = 1;
+ break;
+ default:
+ BUG();
+ }
+ }
+
+ /* Check that chip is expecting address */
+ if (!(ns->nxstate & STATE_ADDR_MASK)) {
+ NS_ERR("write_byte: address (%#x) isn't expected, expected state is %s, "
+ "switch to STATE_READY\n", (uint)byte, get_state_name(ns->nxstate));
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ return;
+ }
+
+ /* Check if this is expected byte */
+ if (ns->regs.count == ns->regs.num) {
+ NS_ERR("write_byte: no more address bytes expected\n");
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ return;
+ }
+
+ accept_addr_byte(ns, byte);
+
+ ns->regs.count += 1;
+
+ NS_DBG("write_byte: address byte %#x was accepted (%d bytes input, %d expected)\n",
+ (uint)byte, ns->regs.count, ns->regs.num);
+
+ if (ns->regs.count == ns->regs.num) {
+ NS_DBG("address (%#x, %#x) is accepted\n", ns->regs.row, ns->regs.column);
+ switch_state(ns);
+ }
+
+ } else {
+ /*
+ * The byte written is an input data.
+ */
+
+ /* Check that chip is expecting data input */
+ if (!(ns->state & STATE_DATAIN_MASK)) {
+ NS_ERR("write_byte: data input (%#x) isn't expected, state is %s, "
+ "switch to %s\n", (uint)byte,
+ get_state_name(ns->state), get_state_name(STATE_READY));
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ return;
+ }
+
+ /* Check if this is expected byte */
+ if (ns->regs.count == ns->regs.num) {
+ NS_WARN("write_byte: %u input bytes has already been accepted, ignore write\n",
+ ns->regs.num);
+ return;
+ }
+
+ if (ns->busw == 8) {
+ ns->buf.byte[ns->regs.count] = byte;
+ ns->regs.count += 1;
+ } else {
+ ns->buf.word[ns->regs.count >> 1] = cpu_to_le16((uint16_t)byte);
+ ns->regs.count += 2;
+ }
+ }
+
+ return;
+}
+
+static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask)
+{
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
+
+ ns->lines.cle = bitmask & NAND_CLE ? 1 : 0;
+ ns->lines.ale = bitmask & NAND_ALE ? 1 : 0;
+ ns->lines.ce = bitmask & NAND_NCE ? 1 : 0;
+
+ if (cmd != NAND_CMD_NONE)
+ ns_nand_write_byte(mtd, cmd);
+}
+
+static int ns_device_ready(struct mtd_info *mtd)
+{
+ NS_DBG("device_ready\n");
+ return 1;
+}
+
+static uint16_t ns_nand_read_word(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = (struct nand_chip *)mtd->priv;
+
+ NS_DBG("read_word\n");
+
+ return chip->read_byte(mtd) | (chip->read_byte(mtd) << 8);
+}
+
+static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
+
+ /* Check that chip is expecting data input */
+ if (!(ns->state & STATE_DATAIN_MASK)) {
+ NS_ERR("write_buf: data input isn't expected, state is %s, "
+ "switch to STATE_READY\n", get_state_name(ns->state));
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ return;
+ }
+
+ /* Check if these are expected bytes */
+ if (ns->regs.count + len > ns->regs.num) {
+ NS_ERR("write_buf: too many input bytes\n");
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ return;
+ }
+
+ memcpy(ns->buf.byte + ns->regs.count, buf, len);
+ ns->regs.count += len;
+
+ if (ns->regs.count == ns->regs.num) {
+ NS_DBG("write_buf: %d bytes were written\n", ns->regs.count);
+ }
+}
+
+static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
+
+ /* Sanity and correctness checks */
+ if (!ns->lines.ce) {
+ NS_ERR("read_buf: chip is disabled\n");
+ return;
+ }
+ if (ns->lines.ale || ns->lines.cle) {
+ NS_ERR("read_buf: ALE or CLE pin is high\n");
+ return;
+ }
+ if (!(ns->state & STATE_DATAOUT_MASK)) {
+ NS_WARN("read_buf: unexpected data output cycle, current state is %s\n",
+ get_state_name(ns->state));
+ return;
+ }
+
+ if (NS_STATE(ns->state) != STATE_DATAOUT) {
+ int i;
+
+ for (i = 0; i < len; i++)
+ buf[i] = ((struct nand_chip *)mtd->priv)->read_byte(mtd);
+
+ return;
+ }
+
+ /* Check if these are expected bytes */
+ if (ns->regs.count + len > ns->regs.num) {
+ NS_ERR("read_buf: too many bytes to read\n");
+ switch_to_ready_state(ns, NS_STATUS_FAILED(ns));
+ return;
+ }
+
+ memcpy(buf, ns->buf.byte + ns->regs.count, len);
+ ns->regs.count += len;
+
+ if (ns->regs.count == ns->regs.num) {
+ if (NS_STATE(ns->nxstate) == STATE_READY)
+ switch_state(ns);
+ }
+
+ return;
+}
+
+/*
+ * Module initialization function
+ */
+static int __init ns_init_module(void)
+{
+ struct nand_chip *chip;
+ struct nandsim *nand;
+ int retval = -ENOMEM, i;
+
+ if (bus_width != 8 && bus_width != 16) {
+ NS_ERR("wrong bus width (%d), use only 8 or 16\n", bus_width);
+ return -EINVAL;
+ }
+
+ /* Allocate and initialize mtd_info, nand_chip and nandsim structures */
+ nsmtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip)
+ + sizeof(struct nandsim), GFP_KERNEL);
+ if (!nsmtd) {
+ NS_ERR("unable to allocate core structures.\n");
+ return -ENOMEM;
+ }
+ chip = (struct nand_chip *)(nsmtd + 1);
+ nsmtd->priv = (void *)chip;
+ nand = (struct nandsim *)(chip + 1);
+ chip->priv = (void *)nand;
+
+ /*
+ * Register simulator's callbacks.
+ */
+ chip->cmd_ctrl = ns_hwcontrol;
+ chip->read_byte = ns_nand_read_byte;
+ chip->dev_ready = ns_device_ready;
+ chip->write_buf = ns_nand_write_buf;
+ chip->read_buf = ns_nand_read_buf;
+ chip->read_word = ns_nand_read_word;
+ chip->ecc.mode = NAND_ECC_SOFT;
+ /* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
+ /* and 'badblocks' parameters to work */
+ chip->options |= NAND_SKIP_BBTSCAN;
+
+ switch (bbt) {
+ case 2:
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+ case 1:
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ case 0:
+ break;
+ default:
+ NS_ERR("bbt has to be 0..2\n");
+ retval = -EINVAL;
+ goto error;
+ }
+ /*
+ * Perform minimum nandsim structure initialization to handle
+ * the initial ID read command correctly
+ */
+ if (id_bytes[6] != 0xFF || id_bytes[7] != 0xFF)
+ nand->geom.idbytes = 8;
+ else if (id_bytes[4] != 0xFF || id_bytes[5] != 0xFF)
+ nand->geom.idbytes = 6;
+ else if (id_bytes[2] != 0xFF || id_bytes[3] != 0xFF)
+ nand->geom.idbytes = 4;
+ else
+ nand->geom.idbytes = 2;
+ nand->regs.status = NS_STATUS_OK(nand);
+ nand->nxstate = STATE_UNKNOWN;
+ nand->options |= OPT_PAGE512; /* temporary value */
+ memcpy(nand->ids, id_bytes, sizeof(nand->ids));
+ if (bus_width == 16) {
+ nand->busw = 16;
+ chip->options |= NAND_BUSWIDTH_16;
+ }
+
+ nsmtd->owner = THIS_MODULE;
+
+ if ((retval = parse_weakblocks()) != 0)
+ goto error;
+
+ if ((retval = parse_weakpages()) != 0)
+ goto error;
+
+ if ((retval = parse_gravepages()) != 0)
+ goto error;
+
+ retval = nand_scan_ident(nsmtd, 1, NULL);
+ if (retval) {
+ NS_ERR("cannot scan NAND Simulator device\n");
+ if (retval > 0)
+ retval = -ENXIO;
+ goto error;
+ }
+
+ if (bch) {
+ unsigned int eccsteps, eccbytes;
+ if (!mtd_nand_has_bch()) {
+ NS_ERR("BCH ECC support is disabled\n");
+ retval = -EINVAL;
+ goto error;
+ }
+ /* use 512-byte ecc blocks */
+ eccsteps = nsmtd->writesize/512;
+ eccbytes = (bch*13+7)/8;
+ /* do not bother supporting small page devices */
+ if ((nsmtd->oobsize < 64) || !eccsteps) {
+ NS_ERR("bch not available on small page devices\n");
+ retval = -EINVAL;
+ goto error;
+ }
+ if ((eccbytes*eccsteps+2) > nsmtd->oobsize) {
+ NS_ERR("invalid bch value %u\n", bch);
+ retval = -EINVAL;
+ goto error;
+ }
+ chip->ecc.mode = NAND_ECC_SOFT_BCH;
+ chip->ecc.size = 512;
+ chip->ecc.strength = bch;
+ chip->ecc.bytes = eccbytes;
+ NS_INFO("using %u-bit/%u bytes BCH ECC\n", bch, chip->ecc.size);
+ }
+
+ retval = nand_scan_tail(nsmtd);
+ if (retval) {
+ NS_ERR("can't register NAND Simulator\n");
+ if (retval > 0)
+ retval = -ENXIO;
+ goto error;
+ }
+
+ if (overridesize) {
+ uint64_t new_size = (uint64_t)nsmtd->erasesize << overridesize;
+ if (new_size >> overridesize != nsmtd->erasesize) {
+ NS_ERR("overridesize is too big\n");
+ retval = -EINVAL;
+ goto err_exit;
+ }
+ /* N.B. This relies on nand_scan not doing anything with the size before we change it */
+ nsmtd->size = new_size;
+ chip->chipsize = new_size;
+ chip->chip_shift = ffs(nsmtd->erasesize) + overridesize - 1;
+ chip->pagemask = (chip->chipsize >> chip->page_shift) - 1;
+ }
+
+ if ((retval = setup_wear_reporting(nsmtd)) != 0)
+ goto err_exit;
+
+ if ((retval = nandsim_debugfs_create(nand)) != 0)
+ goto err_exit;
+
+ if ((retval = init_nandsim(nsmtd)) != 0)
+ goto err_exit;
+
+ if ((retval = chip->scan_bbt(nsmtd)) != 0)
+ goto err_exit;
+
+ if ((retval = parse_badblocks(nand, nsmtd)) != 0)
+ goto err_exit;
+
+ /* Register NAND partitions */
+ retval = mtd_device_register(nsmtd, &nand->partitions[0],
+ nand->nbparts);
+ if (retval != 0)
+ goto err_exit;
+
+ return 0;
+
+err_exit:
+ free_nandsim(nand);
+ nand_release(nsmtd);
+ for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i)
+ kfree(nand->partitions[i].name);
+error:
+ kfree(nsmtd);
+ free_lists();
+
+ return retval;
+}
+
+module_init(ns_init_module);
+
+/*
+ * Module clean-up function
+ */
+static void __exit ns_cleanup_module(void)
+{
+ struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv;
+ int i;
+
+ nandsim_debugfs_remove(ns);
+ free_nandsim(ns); /* Free nandsim private resources */
+ nand_release(nsmtd); /* Unregister driver */
+ for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
+ kfree(ns->partitions[i].name);
+ kfree(nsmtd); /* Free other structures */
+ free_lists();
+}
+
+module_exit(ns_cleanup_module);
+
+MODULE_LICENSE ("GPL");
+MODULE_AUTHOR ("Artem B. Bityuckiy");
+MODULE_DESCRIPTION ("The NAND flash simulator");
diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c
new file mode 100644
index 0000000..4f0d62f
--- /dev/null
+++ b/drivers/mtd/nand/ndfc.c
@@ -0,0 +1,288 @@
+/*
+ * Overview:
+ * Platform independent driver for NDFC (NanD Flash Controller)
+ * integrated into EP440 cores
+ *
+ * Ported to an OF platform driver by Sean MacLennan
+ *
+ * The NDFC supports multiple chips, but this driver only supports a
+ * single chip since I do not have access to any boards with
+ * multiple chips.
+ *
+ * Author: Thomas Gleixner
+ *
+ * Copyright 2006 IBM
+ * Copyright 2008 PIKA Technologies
+ * Sean MacLennan <smaclennan@pikatech.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/ndfc.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <asm/io.h>
+
+#define NDFC_MAX_CS 4
+
+struct ndfc_controller {
+ struct platform_device *ofdev;
+ void __iomem *ndfcbase;
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ int chip_select;
+ struct nand_hw_control ndfc_control;
+};
+
+static struct ndfc_controller ndfc_ctrl[NDFC_MAX_CS];
+
+static void ndfc_select_chip(struct mtd_info *mtd, int chip)
+{
+ uint32_t ccr;
+ struct nand_chip *nchip = mtd->priv;
+ struct ndfc_controller *ndfc = nchip->priv;
+
+ ccr = in_be32(ndfc->ndfcbase + NDFC_CCR);
+ if (chip >= 0) {
+ ccr &= ~NDFC_CCR_BS_MASK;
+ ccr |= NDFC_CCR_BS(chip + ndfc->chip_select);
+ } else
+ ccr |= NDFC_CCR_RESET_CE;
+ out_be32(ndfc->ndfcbase + NDFC_CCR, ccr);
+}
+
+static void ndfc_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ndfc_controller *ndfc = chip->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writel(cmd & 0xFF, ndfc->ndfcbase + NDFC_CMD);
+ else
+ writel(cmd & 0xFF, ndfc->ndfcbase + NDFC_ALE);
+}
+
+static int ndfc_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ndfc_controller *ndfc = chip->priv;
+
+ return in_be32(ndfc->ndfcbase + NDFC_STAT) & NDFC_STAT_IS_READY;
+}
+
+static void ndfc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ uint32_t ccr;
+ struct nand_chip *chip = mtd->priv;
+ struct ndfc_controller *ndfc = chip->priv;
+
+ ccr = in_be32(ndfc->ndfcbase + NDFC_CCR);
+ ccr |= NDFC_CCR_RESET_ECC;
+ out_be32(ndfc->ndfcbase + NDFC_CCR, ccr);
+ wmb();
+}
+
+static int ndfc_calculate_ecc(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_code)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ndfc_controller *ndfc = chip->priv;
+ uint32_t ecc;
+ uint8_t *p = (uint8_t *)&ecc;
+
+ wmb();
+ ecc = in_be32(ndfc->ndfcbase + NDFC_ECC);
+ /* The NDFC uses Smart Media (SMC) bytes order */
+ ecc_code[0] = p[1];
+ ecc_code[1] = p[2];
+ ecc_code[2] = p[3];
+
+ return 0;
+}
+
+/*
+ * Speedups for buffer read/write/verify
+ *
+ * NDFC allows 32bit read/write of data. So we can speed up the buffer
+ * functions. No further checking, as nand_base will always read/write
+ * page aligned.
+ */
+static void ndfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ndfc_controller *ndfc = chip->priv;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(;len > 0; len -= 4)
+ *p++ = in_be32(ndfc->ndfcbase + NDFC_DATA);
+}
+
+static void ndfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct ndfc_controller *ndfc = chip->priv;
+ uint32_t *p = (uint32_t *) buf;
+
+ for(;len > 0; len -= 4)
+ out_be32(ndfc->ndfcbase + NDFC_DATA, *p++);
+}
+
+/*
+ * Initialize chip structure
+ */
+static int ndfc_chip_init(struct ndfc_controller *ndfc,
+ struct device_node *node)
+{
+ struct device_node *flash_np;
+ struct nand_chip *chip = &ndfc->chip;
+ struct mtd_part_parser_data ppdata;
+ int ret;
+
+ chip->IO_ADDR_R = ndfc->ndfcbase + NDFC_DATA;
+ chip->IO_ADDR_W = ndfc->ndfcbase + NDFC_DATA;
+ chip->cmd_ctrl = ndfc_hwcontrol;
+ chip->dev_ready = ndfc_ready;
+ chip->select_chip = ndfc_select_chip;
+ chip->chip_delay = 50;
+ chip->controller = &ndfc->ndfc_control;
+ chip->read_buf = ndfc_read_buf;
+ chip->write_buf = ndfc_write_buf;
+ chip->ecc.correct = nand_correct_data;
+ chip->ecc.hwctl = ndfc_enable_hwecc;
+ chip->ecc.calculate = ndfc_calculate_ecc;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.size = 256;
+ chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
+ chip->priv = ndfc;
+
+ ndfc->mtd.priv = chip;
+ ndfc->mtd.dev.parent = &ndfc->ofdev->dev;
+
+ flash_np = of_get_next_child(node, NULL);
+ if (!flash_np)
+ return -ENODEV;
+
+ ppdata.of_node = flash_np;
+ ndfc->mtd.name = kasprintf(GFP_KERNEL, "%s.%s",
+ dev_name(&ndfc->ofdev->dev), flash_np->name);
+ if (!ndfc->mtd.name) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ ret = nand_scan(&ndfc->mtd, 1);
+ if (ret)
+ goto err;
+
+ ret = mtd_device_parse_register(&ndfc->mtd, NULL, &ppdata, NULL, 0);
+
+err:
+ of_node_put(flash_np);
+ if (ret)
+ kfree(ndfc->mtd.name);
+ return ret;
+}
+
+static int ndfc_probe(struct platform_device *ofdev)
+{
+ struct ndfc_controller *ndfc;
+ const __be32 *reg;
+ u32 ccr;
+ u32 cs;
+ int err, len;
+
+ /* Read the reg property to get the chip select */
+ reg = of_get_property(ofdev->dev.of_node, "reg", &len);
+ if (reg == NULL || len != 12) {
+ dev_err(&ofdev->dev, "unable read reg property (%d)\n", len);
+ return -ENOENT;
+ }
+
+ cs = be32_to_cpu(reg[0]);
+ if (cs >= NDFC_MAX_CS) {
+ dev_err(&ofdev->dev, "invalid CS number (%d)\n", cs);
+ return -EINVAL;
+ }
+
+ ndfc = &ndfc_ctrl[cs];
+ ndfc->chip_select = cs;
+
+ spin_lock_init(&ndfc->ndfc_control.lock);
+ init_waitqueue_head(&ndfc->ndfc_control.wq);
+ ndfc->ofdev = ofdev;
+ dev_set_drvdata(&ofdev->dev, ndfc);
+
+ ndfc->ndfcbase = of_iomap(ofdev->dev.of_node, 0);
+ if (!ndfc->ndfcbase) {
+ dev_err(&ofdev->dev, "failed to get memory\n");
+ return -EIO;
+ }
+
+ ccr = NDFC_CCR_BS(ndfc->chip_select);
+
+ /* It is ok if ccr does not exist - just default to 0 */
+ reg = of_get_property(ofdev->dev.of_node, "ccr", NULL);
+ if (reg)
+ ccr |= be32_to_cpup(reg);
+
+ out_be32(ndfc->ndfcbase + NDFC_CCR, ccr);
+
+ /* Set the bank settings if given */
+ reg = of_get_property(ofdev->dev.of_node, "bank-settings", NULL);
+ if (reg) {
+ int offset = NDFC_BCFG0 + (ndfc->chip_select << 2);
+ out_be32(ndfc->ndfcbase + offset, be32_to_cpup(reg));
+ }
+
+ err = ndfc_chip_init(ndfc, ofdev->dev.of_node);
+ if (err) {
+ iounmap(ndfc->ndfcbase);
+ return err;
+ }
+
+ return 0;
+}
+
+static int ndfc_remove(struct platform_device *ofdev)
+{
+ struct ndfc_controller *ndfc = dev_get_drvdata(&ofdev->dev);
+
+ nand_release(&ndfc->mtd);
+ kfree(ndfc->mtd.name);
+
+ return 0;
+}
+
+static const struct of_device_id ndfc_match[] = {
+ { .compatible = "ibm,ndfc", },
+ {}
+};
+MODULE_DEVICE_TABLE(of, ndfc_match);
+
+static struct platform_driver ndfc_driver = {
+ .driver = {
+ .name = "ndfc",
+ .of_match_table = ndfc_match,
+ },
+ .probe = ndfc_probe,
+ .remove = ndfc_remove,
+};
+
+module_platform_driver(ndfc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Thomas Gleixner <tglx@linutronix.de>");
+MODULE_DESCRIPTION("OF Platform driver for NDFC");
diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c
new file mode 100644
index 0000000..f0687f7
--- /dev/null
+++ b/drivers/mtd/nand/nuc900_nand.c
@@ -0,0 +1,311 @@
+/*
+ * Copyright © 2009 Nuvoton technology corporation.
+ *
+ * Wan ZongShun <mcuos.com@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation;version 2 of the License.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+#define REG_FMICSR 0x00
+#define REG_SMCSR 0xa0
+#define REG_SMISR 0xac
+#define REG_SMCMD 0xb0
+#define REG_SMADDR 0xb4
+#define REG_SMDATA 0xb8
+
+#define RESET_FMI 0x01
+#define NAND_EN 0x08
+#define READYBUSY (0x01 << 18)
+
+#define SWRST 0x01
+#define PSIZE (0x01 << 3)
+#define DMARWEN (0x03 << 1)
+#define BUSWID (0x01 << 4)
+#define ECC4EN (0x01 << 5)
+#define WP (0x01 << 24)
+#define NANDCS (0x01 << 25)
+#define ENDADDR (0x01 << 31)
+
+#define read_data_reg(dev) \
+ __raw_readl((dev)->reg + REG_SMDATA)
+
+#define write_data_reg(dev, val) \
+ __raw_writel((val), (dev)->reg + REG_SMDATA)
+
+#define write_cmd_reg(dev, val) \
+ __raw_writel((val), (dev)->reg + REG_SMCMD)
+
+#define write_addr_reg(dev, val) \
+ __raw_writel((val), (dev)->reg + REG_SMADDR)
+
+struct nuc900_nand {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ void __iomem *reg;
+ struct clk *clk;
+ spinlock_t lock;
+};
+
+static const struct mtd_partition partitions[] = {
+ {
+ .name = "NAND FS 0",
+ .offset = 0,
+ .size = 8 * 1024 * 1024
+ },
+ {
+ .name = "NAND FS 1",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL
+ }
+};
+
+static unsigned char nuc900_nand_read_byte(struct mtd_info *mtd)
+{
+ unsigned char ret;
+ struct nuc900_nand *nand;
+
+ nand = container_of(mtd, struct nuc900_nand, mtd);
+
+ ret = (unsigned char)read_data_reg(nand);
+
+ return ret;
+}
+
+static void nuc900_nand_read_buf(struct mtd_info *mtd,
+ unsigned char *buf, int len)
+{
+ int i;
+ struct nuc900_nand *nand;
+
+ nand = container_of(mtd, struct nuc900_nand, mtd);
+
+ for (i = 0; i < len; i++)
+ buf[i] = (unsigned char)read_data_reg(nand);
+}
+
+static void nuc900_nand_write_buf(struct mtd_info *mtd,
+ const unsigned char *buf, int len)
+{
+ int i;
+ struct nuc900_nand *nand;
+
+ nand = container_of(mtd, struct nuc900_nand, mtd);
+
+ for (i = 0; i < len; i++)
+ write_data_reg(nand, buf[i]);
+}
+
+static int nuc900_check_rb(struct nuc900_nand *nand)
+{
+ unsigned int val;
+ spin_lock(&nand->lock);
+ val = __raw_readl(REG_SMISR);
+ val &= READYBUSY;
+ spin_unlock(&nand->lock);
+
+ return val;
+}
+
+static int nuc900_nand_devready(struct mtd_info *mtd)
+{
+ struct nuc900_nand *nand;
+ int ready;
+
+ nand = container_of(mtd, struct nuc900_nand, mtd);
+
+ ready = (nuc900_check_rb(nand)) ? 1 : 0;
+ return ready;
+}
+
+static void nuc900_nand_command_lp(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+{
+ register struct nand_chip *chip = mtd->priv;
+ struct nuc900_nand *nand;
+
+ nand = container_of(mtd, struct nuc900_nand, mtd);
+
+ if (command == NAND_CMD_READOOB) {
+ column += mtd->writesize;
+ command = NAND_CMD_READ0;
+ }
+
+ write_cmd_reg(nand, command & 0xff);
+
+ if (column != -1 || page_addr != -1) {
+
+ if (column != -1) {
+ if (chip->options & NAND_BUSWIDTH_16 &&
+ !nand_opcode_8bits(command))
+ column >>= 1;
+ write_addr_reg(nand, column);
+ write_addr_reg(nand, column >> 8 | ENDADDR);
+ }
+ if (page_addr != -1) {
+ write_addr_reg(nand, page_addr);
+
+ if (chip->chipsize > (128 << 20)) {
+ write_addr_reg(nand, page_addr >> 8);
+ write_addr_reg(nand, page_addr >> 16 | ENDADDR);
+ } else {
+ write_addr_reg(nand, page_addr >> 8 | ENDADDR);
+ }
+ }
+ }
+
+ switch (command) {
+ case NAND_CMD_CACHEDPROG:
+ case NAND_CMD_PAGEPROG:
+ case NAND_CMD_ERASE1:
+ case NAND_CMD_ERASE2:
+ case NAND_CMD_SEQIN:
+ case NAND_CMD_RNDIN:
+ case NAND_CMD_STATUS:
+ return;
+
+ case NAND_CMD_RESET:
+ if (chip->dev_ready)
+ break;
+ udelay(chip->chip_delay);
+
+ write_cmd_reg(nand, NAND_CMD_STATUS);
+ write_cmd_reg(nand, command);
+
+ while (!nuc900_check_rb(nand))
+ ;
+
+ return;
+
+ case NAND_CMD_RNDOUT:
+ write_cmd_reg(nand, NAND_CMD_RNDOUTSTART);
+ return;
+
+ case NAND_CMD_READ0:
+
+ write_cmd_reg(nand, NAND_CMD_READSTART);
+ default:
+
+ if (!chip->dev_ready) {
+ udelay(chip->chip_delay);
+ return;
+ }
+ }
+
+ /* Apply this short delay always to ensure that we do wait tWB in
+ * any case on any machine. */
+ ndelay(100);
+
+ while (!chip->dev_ready(mtd))
+ ;
+}
+
+
+static void nuc900_nand_enable(struct nuc900_nand *nand)
+{
+ unsigned int val;
+ spin_lock(&nand->lock);
+ __raw_writel(RESET_FMI, (nand->reg + REG_FMICSR));
+
+ val = __raw_readl(nand->reg + REG_FMICSR);
+
+ if (!(val & NAND_EN))
+ __raw_writel(val | NAND_EN, nand->reg + REG_FMICSR);
+
+ val = __raw_readl(nand->reg + REG_SMCSR);
+
+ val &= ~(SWRST|PSIZE|DMARWEN|BUSWID|ECC4EN|NANDCS);
+ val |= WP;
+
+ __raw_writel(val, nand->reg + REG_SMCSR);
+
+ spin_unlock(&nand->lock);
+}
+
+static int nuc900_nand_probe(struct platform_device *pdev)
+{
+ struct nuc900_nand *nuc900_nand;
+ struct nand_chip *chip;
+ struct resource *res;
+
+ nuc900_nand = devm_kzalloc(&pdev->dev, sizeof(struct nuc900_nand),
+ GFP_KERNEL);
+ if (!nuc900_nand)
+ return -ENOMEM;
+ chip = &(nuc900_nand->chip);
+
+ nuc900_nand->mtd.priv = chip;
+ nuc900_nand->mtd.dev.parent = &pdev->dev;
+ spin_lock_init(&nuc900_nand->lock);
+
+ nuc900_nand->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(nuc900_nand->clk))
+ return -ENOENT;
+ clk_enable(nuc900_nand->clk);
+
+ chip->cmdfunc = nuc900_nand_command_lp;
+ chip->dev_ready = nuc900_nand_devready;
+ chip->read_byte = nuc900_nand_read_byte;
+ chip->write_buf = nuc900_nand_write_buf;
+ chip->read_buf = nuc900_nand_read_buf;
+ chip->chip_delay = 50;
+ chip->options = 0;
+ chip->ecc.mode = NAND_ECC_SOFT;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ nuc900_nand->reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(nuc900_nand->reg))
+ return PTR_ERR(nuc900_nand->reg);
+
+ nuc900_nand_enable(nuc900_nand);
+
+ if (nand_scan(&(nuc900_nand->mtd), 1))
+ return -ENXIO;
+
+ mtd_device_register(&(nuc900_nand->mtd), partitions,
+ ARRAY_SIZE(partitions));
+
+ platform_set_drvdata(pdev, nuc900_nand);
+
+ return 0;
+}
+
+static int nuc900_nand_remove(struct platform_device *pdev)
+{
+ struct nuc900_nand *nuc900_nand = platform_get_drvdata(pdev);
+
+ nand_release(&nuc900_nand->mtd);
+ clk_disable(nuc900_nand->clk);
+
+ return 0;
+}
+
+static struct platform_driver nuc900_nand_driver = {
+ .probe = nuc900_nand_probe,
+ .remove = nuc900_nand_remove,
+ .driver = {
+ .name = "nuc900-fmi",
+ },
+};
+
+module_platform_driver(nuc900_nand_driver);
+
+MODULE_AUTHOR("Wan ZongShun <mcuos.com@gmail.com>");
+MODULE_DESCRIPTION("w90p910/NUC9xx nand driver!");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:nuc900-fmi");
diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c
new file mode 100644
index 0000000..93f664c
--- /dev/null
+++ b/drivers/mtd/nand/omap2.c
@@ -0,0 +1,2086 @@
+/*
+ * Copyright © 2004 Texas Instruments, Jian Zhang <jzhang@ti.com>
+ * Copyright © 2004 Micron Technology Inc.
+ * Copyright © 2004 David Brownell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/jiffies.h>
+#include <linux/sched.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/omap-dma.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include <linux/mtd/nand_bch.h>
+#include <linux/platform_data/elm.h>
+
+#include <linux/platform_data/mtd-nand-omap2.h>
+
+#define DRIVER_NAME "omap2-nand"
+#define OMAP_NAND_TIMEOUT_MS 5000
+
+#define NAND_Ecc_P1e (1 << 0)
+#define NAND_Ecc_P2e (1 << 1)
+#define NAND_Ecc_P4e (1 << 2)
+#define NAND_Ecc_P8e (1 << 3)
+#define NAND_Ecc_P16e (1 << 4)
+#define NAND_Ecc_P32e (1 << 5)
+#define NAND_Ecc_P64e (1 << 6)
+#define NAND_Ecc_P128e (1 << 7)
+#define NAND_Ecc_P256e (1 << 8)
+#define NAND_Ecc_P512e (1 << 9)
+#define NAND_Ecc_P1024e (1 << 10)
+#define NAND_Ecc_P2048e (1 << 11)
+
+#define NAND_Ecc_P1o (1 << 16)
+#define NAND_Ecc_P2o (1 << 17)
+#define NAND_Ecc_P4o (1 << 18)
+#define NAND_Ecc_P8o (1 << 19)
+#define NAND_Ecc_P16o (1 << 20)
+#define NAND_Ecc_P32o (1 << 21)
+#define NAND_Ecc_P64o (1 << 22)
+#define NAND_Ecc_P128o (1 << 23)
+#define NAND_Ecc_P256o (1 << 24)
+#define NAND_Ecc_P512o (1 << 25)
+#define NAND_Ecc_P1024o (1 << 26)
+#define NAND_Ecc_P2048o (1 << 27)
+
+#define TF(value) (value ? 1 : 0)
+
+#define P2048e(a) (TF(a & NAND_Ecc_P2048e) << 0)
+#define P2048o(a) (TF(a & NAND_Ecc_P2048o) << 1)
+#define P1e(a) (TF(a & NAND_Ecc_P1e) << 2)
+#define P1o(a) (TF(a & NAND_Ecc_P1o) << 3)
+#define P2e(a) (TF(a & NAND_Ecc_P2e) << 4)
+#define P2o(a) (TF(a & NAND_Ecc_P2o) << 5)
+#define P4e(a) (TF(a & NAND_Ecc_P4e) << 6)
+#define P4o(a) (TF(a & NAND_Ecc_P4o) << 7)
+
+#define P8e(a) (TF(a & NAND_Ecc_P8e) << 0)
+#define P8o(a) (TF(a & NAND_Ecc_P8o) << 1)
+#define P16e(a) (TF(a & NAND_Ecc_P16e) << 2)
+#define P16o(a) (TF(a & NAND_Ecc_P16o) << 3)
+#define P32e(a) (TF(a & NAND_Ecc_P32e) << 4)
+#define P32o(a) (TF(a & NAND_Ecc_P32o) << 5)
+#define P64e(a) (TF(a & NAND_Ecc_P64e) << 6)
+#define P64o(a) (TF(a & NAND_Ecc_P64o) << 7)
+
+#define P128e(a) (TF(a & NAND_Ecc_P128e) << 0)
+#define P128o(a) (TF(a & NAND_Ecc_P128o) << 1)
+#define P256e(a) (TF(a & NAND_Ecc_P256e) << 2)
+#define P256o(a) (TF(a & NAND_Ecc_P256o) << 3)
+#define P512e(a) (TF(a & NAND_Ecc_P512e) << 4)
+#define P512o(a) (TF(a & NAND_Ecc_P512o) << 5)
+#define P1024e(a) (TF(a & NAND_Ecc_P1024e) << 6)
+#define P1024o(a) (TF(a & NAND_Ecc_P1024o) << 7)
+
+#define P8e_s(a) (TF(a & NAND_Ecc_P8e) << 0)
+#define P8o_s(a) (TF(a & NAND_Ecc_P8o) << 1)
+#define P16e_s(a) (TF(a & NAND_Ecc_P16e) << 2)
+#define P16o_s(a) (TF(a & NAND_Ecc_P16o) << 3)
+#define P1e_s(a) (TF(a & NAND_Ecc_P1e) << 4)
+#define P1o_s(a) (TF(a & NAND_Ecc_P1o) << 5)
+#define P2e_s(a) (TF(a & NAND_Ecc_P2e) << 6)
+#define P2o_s(a) (TF(a & NAND_Ecc_P2o) << 7)
+
+#define P4e_s(a) (TF(a & NAND_Ecc_P4e) << 0)
+#define P4o_s(a) (TF(a & NAND_Ecc_P4o) << 1)
+
+#define PREFETCH_CONFIG1_CS_SHIFT 24
+#define ECC_CONFIG_CS_SHIFT 1
+#define CS_MASK 0x7
+#define ENABLE_PREFETCH (0x1 << 7)
+#define DMA_MPU_MODE_SHIFT 2
+#define ECCSIZE0_SHIFT 12
+#define ECCSIZE1_SHIFT 22
+#define ECC1RESULTSIZE 0x1
+#define ECCCLEAR 0x100
+#define ECC1 0x1
+#define PREFETCH_FIFOTHRESHOLD_MAX 0x40
+#define PREFETCH_FIFOTHRESHOLD(val) ((val) << 8)
+#define PREFETCH_STATUS_COUNT(val) (val & 0x00003fff)
+#define PREFETCH_STATUS_FIFO_CNT(val) ((val >> 24) & 0x7F)
+#define STATUS_BUFF_EMPTY 0x00000001
+
+#define OMAP24XX_DMA_GPMC 4
+
+#define SECTOR_BYTES 512
+/* 4 bit padding to make byte aligned, 56 = 52 + 4 */
+#define BCH4_BIT_PAD 4
+
+/* GPMC ecc engine settings for read */
+#define BCH_WRAPMODE_1 1 /* BCH wrap mode 1 */
+#define BCH8R_ECC_SIZE0 0x1a /* ecc_size0 = 26 */
+#define BCH8R_ECC_SIZE1 0x2 /* ecc_size1 = 2 */
+#define BCH4R_ECC_SIZE0 0xd /* ecc_size0 = 13 */
+#define BCH4R_ECC_SIZE1 0x3 /* ecc_size1 = 3 */
+
+/* GPMC ecc engine settings for write */
+#define BCH_WRAPMODE_6 6 /* BCH wrap mode 6 */
+#define BCH_ECC_SIZE0 0x0 /* ecc_size0 = 0, no oob protection */
+#define BCH_ECC_SIZE1 0x20 /* ecc_size1 = 32 */
+
+#define BADBLOCK_MARKER_LENGTH 2
+
+static u_char bch16_vector[] = {0xf5, 0x24, 0x1c, 0xd0, 0x61, 0xb3, 0xf1, 0x55,
+ 0x2e, 0x2c, 0x86, 0xa3, 0xed, 0x36, 0x1b, 0x78,
+ 0x48, 0x76, 0xa9, 0x3b, 0x97, 0xd1, 0x7a, 0x93,
+ 0x07, 0x0e};
+static u_char bch8_vector[] = {0xf3, 0xdb, 0x14, 0x16, 0x8b, 0xd2, 0xbe, 0xcc,
+ 0xac, 0x6b, 0xff, 0x99, 0x7b};
+static u_char bch4_vector[] = {0x00, 0x6b, 0x31, 0xdd, 0x41, 0xbc, 0x10};
+
+/* Shared among all NAND instances to synchronize access to the ECC Engine */
+static struct nand_hw_control omap_gpmc_controller = {
+ .lock = __SPIN_LOCK_UNLOCKED(omap_gpmc_controller.lock),
+ .wq = __WAIT_QUEUE_HEAD_INITIALIZER(omap_gpmc_controller.wq),
+};
+
+struct omap_nand_info {
+ struct omap_nand_platform_data *pdata;
+ struct mtd_info mtd;
+ struct nand_chip nand;
+ struct platform_device *pdev;
+
+ int gpmc_cs;
+ unsigned long phys_base;
+ enum omap_ecc ecc_opt;
+ struct completion comp;
+ struct dma_chan *dma;
+ int gpmc_irq_fifo;
+ int gpmc_irq_count;
+ enum {
+ OMAP_NAND_IO_READ = 0, /* read */
+ OMAP_NAND_IO_WRITE, /* write */
+ } iomode;
+ u_char *buf;
+ int buf_len;
+ struct gpmc_nand_regs reg;
+ /* generated at runtime depending on ECC algorithm and layout selected */
+ struct nand_ecclayout oobinfo;
+ /* fields specific for BCHx_HW ECC scheme */
+ struct device *elm_dev;
+ struct device_node *of_node;
+};
+
+/**
+ * omap_prefetch_enable - configures and starts prefetch transfer
+ * @cs: cs (chip select) number
+ * @fifo_th: fifo threshold to be used for read/ write
+ * @dma_mode: dma mode enable (1) or disable (0)
+ * @u32_count: number of bytes to be transferred
+ * @is_write: prefetch read(0) or write post(1) mode
+ */
+static int omap_prefetch_enable(int cs, int fifo_th, int dma_mode,
+ unsigned int u32_count, int is_write, struct omap_nand_info *info)
+{
+ u32 val;
+
+ if (fifo_th > PREFETCH_FIFOTHRESHOLD_MAX)
+ return -1;
+
+ if (readl(info->reg.gpmc_prefetch_control))
+ return -EBUSY;
+
+ /* Set the amount of bytes to be prefetched */
+ writel(u32_count, info->reg.gpmc_prefetch_config2);
+
+ /* Set dma/mpu mode, the prefetch read / post write and
+ * enable the engine. Set which cs is has requested for.
+ */
+ val = ((cs << PREFETCH_CONFIG1_CS_SHIFT) |
+ PREFETCH_FIFOTHRESHOLD(fifo_th) | ENABLE_PREFETCH |
+ (dma_mode << DMA_MPU_MODE_SHIFT) | (0x1 & is_write));
+ writel(val, info->reg.gpmc_prefetch_config1);
+
+ /* Start the prefetch engine */
+ writel(0x1, info->reg.gpmc_prefetch_control);
+
+ return 0;
+}
+
+/**
+ * omap_prefetch_reset - disables and stops the prefetch engine
+ */
+static int omap_prefetch_reset(int cs, struct omap_nand_info *info)
+{
+ u32 config1;
+
+ /* check if the same module/cs is trying to reset */
+ config1 = readl(info->reg.gpmc_prefetch_config1);
+ if (((config1 >> PREFETCH_CONFIG1_CS_SHIFT) & CS_MASK) != cs)
+ return -EINVAL;
+
+ /* Stop the PFPW engine */
+ writel(0x0, info->reg.gpmc_prefetch_control);
+
+ /* Reset/disable the PFPW engine */
+ writel(0x0, info->reg.gpmc_prefetch_config1);
+
+ return 0;
+}
+
+/**
+ * omap_hwcontrol - hardware specific access to control-lines
+ * @mtd: MTD device structure
+ * @cmd: command to device
+ * @ctrl:
+ * NAND_NCE: bit 0 -> don't care
+ * NAND_CLE: bit 1 -> Command Latch
+ * NAND_ALE: bit 2 -> Address Latch
+ *
+ * NOTE: boards may use different bits for these!!
+ */
+static void omap_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+
+ if (cmd != NAND_CMD_NONE) {
+ if (ctrl & NAND_CLE)
+ writeb(cmd, info->reg.gpmc_nand_command);
+
+ else if (ctrl & NAND_ALE)
+ writeb(cmd, info->reg.gpmc_nand_address);
+
+ else /* NAND_NCE */
+ writeb(cmd, info->reg.gpmc_nand_data);
+ }
+}
+
+/**
+ * omap_read_buf8 - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf8(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *nand = mtd->priv;
+
+ ioread8_rep(nand->IO_ADDR_R, buf, len);
+}
+
+/**
+ * omap_write_buf8 - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf8(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ u_char *p = (u_char *)buf;
+ u32 status = 0;
+
+ while (len--) {
+ iowrite8(*p++, info->nand.IO_ADDR_W);
+ /* wait until buffer is available for write */
+ do {
+ status = readl(info->reg.gpmc_status) &
+ STATUS_BUFF_EMPTY;
+ } while (!status);
+ }
+}
+
+/**
+ * omap_read_buf16 - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf16(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *nand = mtd->priv;
+
+ ioread16_rep(nand->IO_ADDR_R, buf, len / 2);
+}
+
+/**
+ * omap_write_buf16 - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf16(struct mtd_info *mtd, const u_char * buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ u16 *p = (u16 *) buf;
+ u32 status = 0;
+ /* FIXME try bursts of writesw() or DMA ... */
+ len >>= 1;
+
+ while (len--) {
+ iowrite16(*p++, info->nand.IO_ADDR_W);
+ /* wait until buffer is available for write */
+ do {
+ status = readl(info->reg.gpmc_status) &
+ STATUS_BUFF_EMPTY;
+ } while (!status);
+ }
+}
+
+/**
+ * omap_read_buf_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ uint32_t r_count = 0;
+ int ret = 0;
+ u32 *p = (u32 *)buf;
+
+ /* take care of subpage reads */
+ if (len % 4) {
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_read_buf16(mtd, buf, len % 4);
+ else
+ omap_read_buf8(mtd, buf, len % 4);
+ p = (u32 *) (buf + len % 4);
+ len -= len % 4;
+ }
+
+ /* configure and start prefetch transfer */
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x0, info);
+ if (ret) {
+ /* PFPW engine is busy, use cpu copy method */
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_read_buf16(mtd, (u_char *)p, len);
+ else
+ omap_read_buf8(mtd, (u_char *)p, len);
+ } else {
+ do {
+ r_count = readl(info->reg.gpmc_prefetch_status);
+ r_count = PREFETCH_STATUS_FIFO_CNT(r_count);
+ r_count = r_count >> 2;
+ ioread32_rep(info->nand.IO_ADDR_R, p, r_count);
+ p += r_count;
+ len -= r_count << 2;
+ } while (len);
+ /* disable and stop the PFPW engine */
+ omap_prefetch_reset(info->gpmc_cs, info);
+ }
+}
+
+/**
+ * omap_write_buf_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_pref(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ uint32_t w_count = 0;
+ int i = 0, ret = 0;
+ u16 *p = (u16 *)buf;
+ unsigned long tim, limit;
+ u32 val;
+
+ /* take care of subpage writes */
+ if (len % 2 != 0) {
+ writeb(*buf, info->nand.IO_ADDR_W);
+ p = (u16 *)(buf + 1);
+ len--;
+ }
+
+ /* configure and start prefetch transfer */
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x0, len, 0x1, info);
+ if (ret) {
+ /* PFPW engine is busy, use cpu copy method */
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_write_buf16(mtd, (u_char *)p, len);
+ else
+ omap_write_buf8(mtd, (u_char *)p, len);
+ } else {
+ while (len) {
+ w_count = readl(info->reg.gpmc_prefetch_status);
+ w_count = PREFETCH_STATUS_FIFO_CNT(w_count);
+ w_count = w_count >> 1;
+ for (i = 0; (i < w_count) && len; i++, len -= 2)
+ iowrite16(*p++, info->nand.IO_ADDR_W);
+ }
+ /* wait for data to flushed-out before reset the prefetch */
+ tim = 0;
+ limit = (loops_per_jiffy *
+ msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+ do {
+ cpu_relax();
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = PREFETCH_STATUS_COUNT(val);
+ } while (val && (tim++ < limit));
+
+ /* disable and stop the PFPW engine */
+ omap_prefetch_reset(info->gpmc_cs, info);
+ }
+}
+
+/*
+ * omap_nand_dma_callback: callback on the completion of dma transfer
+ * @data: pointer to completion data structure
+ */
+static void omap_nand_dma_callback(void *data)
+{
+ complete((struct completion *) data);
+}
+
+/*
+ * omap_nand_dma_transfer: configure and start dma transfer
+ * @mtd: MTD device structure
+ * @addr: virtual address in RAM of source/destination
+ * @len: number of data bytes to be transferred
+ * @is_write: flag for read/write operation
+ */
+static inline int omap_nand_dma_transfer(struct mtd_info *mtd, void *addr,
+ unsigned int len, int is_write)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ struct dma_async_tx_descriptor *tx;
+ enum dma_data_direction dir = is_write ? DMA_TO_DEVICE :
+ DMA_FROM_DEVICE;
+ struct scatterlist sg;
+ unsigned long tim, limit;
+ unsigned n;
+ int ret;
+ u32 val;
+
+ if (addr >= high_memory) {
+ struct page *p1;
+
+ if (((size_t)addr & PAGE_MASK) !=
+ ((size_t)(addr + len - 1) & PAGE_MASK))
+ goto out_copy;
+ p1 = vmalloc_to_page(addr);
+ if (!p1)
+ goto out_copy;
+ addr = page_address(p1) + ((size_t)addr & ~PAGE_MASK);
+ }
+
+ sg_init_one(&sg, addr, len);
+ n = dma_map_sg(info->dma->device->dev, &sg, 1, dir);
+ if (n == 0) {
+ dev_err(&info->pdev->dev,
+ "Couldn't DMA map a %d byte buffer\n", len);
+ goto out_copy;
+ }
+
+ tx = dmaengine_prep_slave_sg(info->dma, &sg, n,
+ is_write ? DMA_MEM_TO_DEV : DMA_DEV_TO_MEM,
+ DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+ if (!tx)
+ goto out_copy_unmap;
+
+ tx->callback = omap_nand_dma_callback;
+ tx->callback_param = &info->comp;
+ dmaengine_submit(tx);
+
+ /* configure and start prefetch transfer */
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX, 0x1, len, is_write, info);
+ if (ret)
+ /* PFPW engine is busy, use cpu copy method */
+ goto out_copy_unmap;
+
+ init_completion(&info->comp);
+ dma_async_issue_pending(info->dma);
+
+ /* setup and start DMA using dma_addr */
+ wait_for_completion(&info->comp);
+ tim = 0;
+ limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+
+ do {
+ cpu_relax();
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = PREFETCH_STATUS_COUNT(val);
+ } while (val && (tim++ < limit));
+
+ /* disable and stop the PFPW engine */
+ omap_prefetch_reset(info->gpmc_cs, info);
+
+ dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
+ return 0;
+
+out_copy_unmap:
+ dma_unmap_sg(info->dma->device->dev, &sg, 1, dir);
+out_copy:
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ is_write == 0 ? omap_read_buf16(mtd, (u_char *) addr, len)
+ : omap_write_buf16(mtd, (u_char *) addr, len);
+ else
+ is_write == 0 ? omap_read_buf8(mtd, (u_char *) addr, len)
+ : omap_write_buf8(mtd, (u_char *) addr, len);
+ return 0;
+}
+
+/**
+ * omap_read_buf_dma_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_dma_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+ if (len <= mtd->oobsize)
+ omap_read_buf_pref(mtd, buf, len);
+ else
+ /* start transfer in DMA mode */
+ omap_nand_dma_transfer(mtd, buf, len, 0x0);
+}
+
+/**
+ * omap_write_buf_dma_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_dma_pref(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ if (len <= mtd->oobsize)
+ omap_write_buf_pref(mtd, buf, len);
+ else
+ /* start transfer in DMA mode */
+ omap_nand_dma_transfer(mtd, (u_char *) buf, len, 0x1);
+}
+
+/*
+ * omap_nand_irq - GPMC irq handler
+ * @this_irq: gpmc irq number
+ * @dev: omap_nand_info structure pointer is passed here
+ */
+static irqreturn_t omap_nand_irq(int this_irq, void *dev)
+{
+ struct omap_nand_info *info = (struct omap_nand_info *) dev;
+ u32 bytes;
+
+ bytes = readl(info->reg.gpmc_prefetch_status);
+ bytes = PREFETCH_STATUS_FIFO_CNT(bytes);
+ bytes = bytes & 0xFFFC; /* io in multiple of 4 bytes */
+ if (info->iomode == OMAP_NAND_IO_WRITE) { /* checks for write io */
+ if (this_irq == info->gpmc_irq_count)
+ goto done;
+
+ if (info->buf_len && (info->buf_len < bytes))
+ bytes = info->buf_len;
+ else if (!info->buf_len)
+ bytes = 0;
+ iowrite32_rep(info->nand.IO_ADDR_W,
+ (u32 *)info->buf, bytes >> 2);
+ info->buf = info->buf + bytes;
+ info->buf_len -= bytes;
+
+ } else {
+ ioread32_rep(info->nand.IO_ADDR_R,
+ (u32 *)info->buf, bytes >> 2);
+ info->buf = info->buf + bytes;
+
+ if (this_irq == info->gpmc_irq_count)
+ goto done;
+ }
+
+ return IRQ_HANDLED;
+
+done:
+ complete(&info->comp);
+
+ disable_irq_nosync(info->gpmc_irq_fifo);
+ disable_irq_nosync(info->gpmc_irq_count);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * omap_read_buf_irq_pref - read data from NAND controller into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void omap_read_buf_irq_pref(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ int ret = 0;
+
+ if (len <= mtd->oobsize) {
+ omap_read_buf_pref(mtd, buf, len);
+ return;
+ }
+
+ info->iomode = OMAP_NAND_IO_READ;
+ info->buf = buf;
+ init_completion(&info->comp);
+
+ /* configure and start prefetch transfer */
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ PREFETCH_FIFOTHRESHOLD_MAX/2, 0x0, len, 0x0, info);
+ if (ret)
+ /* PFPW engine is busy, use cpu copy method */
+ goto out_copy;
+
+ info->buf_len = len;
+
+ enable_irq(info->gpmc_irq_count);
+ enable_irq(info->gpmc_irq_fifo);
+
+ /* waiting for read to complete */
+ wait_for_completion(&info->comp);
+
+ /* disable and stop the PFPW engine */
+ omap_prefetch_reset(info->gpmc_cs, info);
+ return;
+
+out_copy:
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_read_buf16(mtd, buf, len);
+ else
+ omap_read_buf8(mtd, buf, len);
+}
+
+/*
+ * omap_write_buf_irq_pref - write buffer to NAND controller
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void omap_write_buf_irq_pref(struct mtd_info *mtd,
+ const u_char *buf, int len)
+{
+ struct omap_nand_info *info = container_of(mtd,
+ struct omap_nand_info, mtd);
+ int ret = 0;
+ unsigned long tim, limit;
+ u32 val;
+
+ if (len <= mtd->oobsize) {
+ omap_write_buf_pref(mtd, buf, len);
+ return;
+ }
+
+ info->iomode = OMAP_NAND_IO_WRITE;
+ info->buf = (u_char *) buf;
+ init_completion(&info->comp);
+
+ /* configure and start prefetch transfer : size=24 */
+ ret = omap_prefetch_enable(info->gpmc_cs,
+ (PREFETCH_FIFOTHRESHOLD_MAX * 3) / 8, 0x0, len, 0x1, info);
+ if (ret)
+ /* PFPW engine is busy, use cpu copy method */
+ goto out_copy;
+
+ info->buf_len = len;
+
+ enable_irq(info->gpmc_irq_count);
+ enable_irq(info->gpmc_irq_fifo);
+
+ /* waiting for write to complete */
+ wait_for_completion(&info->comp);
+
+ /* wait for data to flushed-out before reset the prefetch */
+ tim = 0;
+ limit = (loops_per_jiffy * msecs_to_jiffies(OMAP_NAND_TIMEOUT_MS));
+ do {
+ val = readl(info->reg.gpmc_prefetch_status);
+ val = PREFETCH_STATUS_COUNT(val);
+ cpu_relax();
+ } while (val && (tim++ < limit));
+
+ /* disable and stop the PFPW engine */
+ omap_prefetch_reset(info->gpmc_cs, info);
+ return;
+
+out_copy:
+ if (info->nand.options & NAND_BUSWIDTH_16)
+ omap_write_buf16(mtd, buf, len);
+ else
+ omap_write_buf8(mtd, buf, len);
+}
+
+/**
+ * gen_true_ecc - This function will generate true ECC value
+ * @ecc_buf: buffer to store ecc code
+ *
+ * This generated true ECC value can be used when correcting
+ * data read from NAND flash memory core
+ */
+static void gen_true_ecc(u8 *ecc_buf)
+{
+ u32 tmp = ecc_buf[0] | (ecc_buf[1] << 16) |
+ ((ecc_buf[2] & 0xF0) << 20) | ((ecc_buf[2] & 0x0F) << 8);
+
+ ecc_buf[0] = ~(P64o(tmp) | P64e(tmp) | P32o(tmp) | P32e(tmp) |
+ P16o(tmp) | P16e(tmp) | P8o(tmp) | P8e(tmp));
+ ecc_buf[1] = ~(P1024o(tmp) | P1024e(tmp) | P512o(tmp) | P512e(tmp) |
+ P256o(tmp) | P256e(tmp) | P128o(tmp) | P128e(tmp));
+ ecc_buf[2] = ~(P4o(tmp) | P4e(tmp) | P2o(tmp) | P2e(tmp) | P1o(tmp) |
+ P1e(tmp) | P2048o(tmp) | P2048e(tmp));
+}
+
+/**
+ * omap_compare_ecc - Detect (2 bits) and correct (1 bit) error in data
+ * @ecc_data1: ecc code from nand spare area
+ * @ecc_data2: ecc code from hardware register obtained from hardware ecc
+ * @page_data: page data
+ *
+ * This function compares two ECC's and indicates if there is an error.
+ * If the error can be corrected it will be corrected to the buffer.
+ * If there is no error, %0 is returned. If there is an error but it
+ * was corrected, %1 is returned. Otherwise, %-1 is returned.
+ */
+static int omap_compare_ecc(u8 *ecc_data1, /* read from NAND memory */
+ u8 *ecc_data2, /* read from register */
+ u8 *page_data)
+{
+ uint i;
+ u8 tmp0_bit[8], tmp1_bit[8], tmp2_bit[8];
+ u8 comp0_bit[8], comp1_bit[8], comp2_bit[8];
+ u8 ecc_bit[24];
+ u8 ecc_sum = 0;
+ u8 find_bit = 0;
+ uint find_byte = 0;
+ int isEccFF;
+
+ isEccFF = ((*(u32 *)ecc_data1 & 0xFFFFFF) == 0xFFFFFF);
+
+ gen_true_ecc(ecc_data1);
+ gen_true_ecc(ecc_data2);
+
+ for (i = 0; i <= 2; i++) {
+ *(ecc_data1 + i) = ~(*(ecc_data1 + i));
+ *(ecc_data2 + i) = ~(*(ecc_data2 + i));
+ }
+
+ for (i = 0; i < 8; i++) {
+ tmp0_bit[i] = *ecc_data1 % 2;
+ *ecc_data1 = *ecc_data1 / 2;
+ }
+
+ for (i = 0; i < 8; i++) {
+ tmp1_bit[i] = *(ecc_data1 + 1) % 2;
+ *(ecc_data1 + 1) = *(ecc_data1 + 1) / 2;
+ }
+
+ for (i = 0; i < 8; i++) {
+ tmp2_bit[i] = *(ecc_data1 + 2) % 2;
+ *(ecc_data1 + 2) = *(ecc_data1 + 2) / 2;
+ }
+
+ for (i = 0; i < 8; i++) {
+ comp0_bit[i] = *ecc_data2 % 2;
+ *ecc_data2 = *ecc_data2 / 2;
+ }
+
+ for (i = 0; i < 8; i++) {
+ comp1_bit[i] = *(ecc_data2 + 1) % 2;
+ *(ecc_data2 + 1) = *(ecc_data2 + 1) / 2;
+ }
+
+ for (i = 0; i < 8; i++) {
+ comp2_bit[i] = *(ecc_data2 + 2) % 2;
+ *(ecc_data2 + 2) = *(ecc_data2 + 2) / 2;
+ }
+
+ for (i = 0; i < 6; i++)
+ ecc_bit[i] = tmp2_bit[i + 2] ^ comp2_bit[i + 2];
+
+ for (i = 0; i < 8; i++)
+ ecc_bit[i + 6] = tmp0_bit[i] ^ comp0_bit[i];
+
+ for (i = 0; i < 8; i++)
+ ecc_bit[i + 14] = tmp1_bit[i] ^ comp1_bit[i];
+
+ ecc_bit[22] = tmp2_bit[0] ^ comp2_bit[0];
+ ecc_bit[23] = tmp2_bit[1] ^ comp2_bit[1];
+
+ for (i = 0; i < 24; i++)
+ ecc_sum += ecc_bit[i];
+
+ switch (ecc_sum) {
+ case 0:
+ /* Not reached because this function is not called if
+ * ECC values are equal
+ */
+ return 0;
+
+ case 1:
+ /* Uncorrectable error */
+ pr_debug("ECC UNCORRECTED_ERROR 1\n");
+ return -1;
+
+ case 11:
+ /* UN-Correctable error */
+ pr_debug("ECC UNCORRECTED_ERROR B\n");
+ return -1;
+
+ case 12:
+ /* Correctable error */
+ find_byte = (ecc_bit[23] << 8) +
+ (ecc_bit[21] << 7) +
+ (ecc_bit[19] << 6) +
+ (ecc_bit[17] << 5) +
+ (ecc_bit[15] << 4) +
+ (ecc_bit[13] << 3) +
+ (ecc_bit[11] << 2) +
+ (ecc_bit[9] << 1) +
+ ecc_bit[7];
+
+ find_bit = (ecc_bit[5] << 2) + (ecc_bit[3] << 1) + ecc_bit[1];
+
+ pr_debug("Correcting single bit ECC error at offset: "
+ "%d, bit: %d\n", find_byte, find_bit);
+
+ page_data[find_byte] ^= (1 << find_bit);
+
+ return 1;
+ default:
+ if (isEccFF) {
+ if (ecc_data2[0] == 0 &&
+ ecc_data2[1] == 0 &&
+ ecc_data2[2] == 0)
+ return 0;
+ }
+ pr_debug("UNCORRECTED_ERROR default\n");
+ return -1;
+ }
+}
+
+/**
+ * omap_correct_data - Compares the ECC read with HW generated ECC
+ * @mtd: MTD device structure
+ * @dat: page data
+ * @read_ecc: ecc read from nand flash
+ * @calc_ecc: ecc read from HW ECC registers
+ *
+ * Compares the ecc read from nand spare area with ECC registers values
+ * and if ECC's mismatched, it will call 'omap_compare_ecc' for error
+ * detection and correction. If there are no errors, %0 is returned. If
+ * there were errors and all of the errors were corrected, the number of
+ * corrected errors is returned. If uncorrectable errors exist, %-1 is
+ * returned.
+ */
+static int omap_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ int blockCnt = 0, i = 0, ret = 0;
+ int stat = 0;
+
+ /* Ex NAND_ECC_HW12_2048 */
+ if ((info->nand.ecc.mode == NAND_ECC_HW) &&
+ (info->nand.ecc.size == 2048))
+ blockCnt = 4;
+ else
+ blockCnt = 1;
+
+ for (i = 0; i < blockCnt; i++) {
+ if (memcmp(read_ecc, calc_ecc, 3) != 0) {
+ ret = omap_compare_ecc(read_ecc, calc_ecc, dat);
+ if (ret < 0)
+ return ret;
+ /* keep track of the number of corrected errors */
+ stat += ret;
+ }
+ read_ecc += 3;
+ calc_ecc += 3;
+ dat += 512;
+ }
+ return stat;
+}
+
+/**
+ * omap_calcuate_ecc - Generate non-inverted ECC bytes.
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ *
+ * Using noninverted ECC can be considered ugly since writing a blank
+ * page ie. padding will clear the ECC bytes. This is no problem as long
+ * nobody is trying to write data on the seemingly unused page. Reading
+ * an erased page will produce an ECC mismatch between generated and read
+ * ECC bytes that has to be dealt with separately.
+ */
+static int omap_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ u32 val;
+
+ val = readl(info->reg.gpmc_ecc_config);
+ if (((val >> ECC_CONFIG_CS_SHIFT) & CS_MASK) != info->gpmc_cs)
+ return -EINVAL;
+
+ /* read ecc result */
+ val = readl(info->reg.gpmc_ecc1_result);
+ *ecc_code++ = val; /* P128e, ..., P1e */
+ *ecc_code++ = val >> 16; /* P128o, ..., P1o */
+ /* P2048o, P1024o, P512o, P256o, P2048e, P1024e, P512e, P256e */
+ *ecc_code++ = ((val >> 8) & 0x0f) | ((val >> 20) & 0xf0);
+
+ return 0;
+}
+
+/**
+ * omap_enable_hwecc - This function enables the hardware ecc functionality
+ * @mtd: MTD device structure
+ * @mode: Read/Write mode
+ */
+static void omap_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ struct nand_chip *chip = mtd->priv;
+ unsigned int dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+ u32 val;
+
+ /* clear ecc and enable bits */
+ val = ECCCLEAR | ECC1;
+ writel(val, info->reg.gpmc_ecc_control);
+
+ /* program ecc and result sizes */
+ val = ((((info->nand.ecc.size >> 1) - 1) << ECCSIZE1_SHIFT) |
+ ECC1RESULTSIZE);
+ writel(val, info->reg.gpmc_ecc_size_config);
+
+ switch (mode) {
+ case NAND_ECC_READ:
+ case NAND_ECC_WRITE:
+ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
+ break;
+ case NAND_ECC_READSYN:
+ writel(ECCCLEAR, info->reg.gpmc_ecc_control);
+ break;
+ default:
+ dev_info(&info->pdev->dev,
+ "error: unrecognized Mode[%d]!\n", mode);
+ break;
+ }
+
+ /* (ECC 16 or 8 bit col) | ( CS ) | ECC Enable */
+ val = (dev_width << 7) | (info->gpmc_cs << 1) | (0x1);
+ writel(val, info->reg.gpmc_ecc_config);
+}
+
+/**
+ * omap_wait - wait until the command is done
+ * @mtd: MTD device structure
+ * @chip: NAND Chip structure
+ *
+ * Wait function is called during Program and erase operations and
+ * the way it is called from MTD layer, we should wait till the NAND
+ * chip is ready after the programming/erase operation has completed.
+ *
+ * Erase can take up to 400ms and program up to 20ms according to
+ * general NAND and SmartMedia specs
+ */
+static int omap_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct nand_chip *this = mtd->priv;
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ unsigned long timeo = jiffies;
+ int status, state = this->state;
+
+ if (state == FL_ERASING)
+ timeo += msecs_to_jiffies(400);
+ else
+ timeo += msecs_to_jiffies(20);
+
+ writeb(NAND_CMD_STATUS & 0xFF, info->reg.gpmc_nand_command);
+ while (time_before(jiffies, timeo)) {
+ status = readb(info->reg.gpmc_nand_data);
+ if (status & NAND_STATUS_READY)
+ break;
+ cond_resched();
+ }
+
+ status = readb(info->reg.gpmc_nand_data);
+ return status;
+}
+
+/**
+ * omap_dev_ready - calls the platform specific dev_ready function
+ * @mtd: MTD device structure
+ */
+static int omap_dev_ready(struct mtd_info *mtd)
+{
+ unsigned int val = 0;
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+
+ val = readl(info->reg.gpmc_status);
+
+ if ((val & 0x100) == 0x100) {
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
+/**
+ * omap_enable_hwecc_bch - Program GPMC to perform BCH ECC calculation
+ * @mtd: MTD device structure
+ * @mode: Read/Write mode
+ *
+ * When using BCH with SW correction (i.e. no ELM), sector size is set
+ * to 512 bytes and we use BCH_WRAPMODE_6 wrapping mode
+ * for both reading and writing with:
+ * eccsize0 = 0 (no additional protected byte in spare area)
+ * eccsize1 = 32 (skip 32 nibbles = 16 bytes per sector in spare area)
+ */
+static void __maybe_unused omap_enable_hwecc_bch(struct mtd_info *mtd, int mode)
+{
+ unsigned int bch_type;
+ unsigned int dev_width, nsectors;
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ enum omap_ecc ecc_opt = info->ecc_opt;
+ struct nand_chip *chip = mtd->priv;
+ u32 val, wr_mode;
+ unsigned int ecc_size1, ecc_size0;
+
+ /* GPMC configurations for calculating ECC */
+ switch (ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ bch_type = 0;
+ nsectors = 1;
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
+ break;
+ case OMAP_ECC_BCH4_CODE_HW:
+ bch_type = 0;
+ nsectors = chip->ecc.steps;
+ if (mode == NAND_ECC_READ) {
+ wr_mode = BCH_WRAPMODE_1;
+ ecc_size0 = BCH4R_ECC_SIZE0;
+ ecc_size1 = BCH4R_ECC_SIZE1;
+ } else {
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
+ }
+ break;
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ bch_type = 1;
+ nsectors = 1;
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
+ break;
+ case OMAP_ECC_BCH8_CODE_HW:
+ bch_type = 1;
+ nsectors = chip->ecc.steps;
+ if (mode == NAND_ECC_READ) {
+ wr_mode = BCH_WRAPMODE_1;
+ ecc_size0 = BCH8R_ECC_SIZE0;
+ ecc_size1 = BCH8R_ECC_SIZE1;
+ } else {
+ wr_mode = BCH_WRAPMODE_6;
+ ecc_size0 = BCH_ECC_SIZE0;
+ ecc_size1 = BCH_ECC_SIZE1;
+ }
+ break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ bch_type = 0x2;
+ nsectors = chip->ecc.steps;
+ if (mode == NAND_ECC_READ) {
+ wr_mode = 0x01;
+ ecc_size0 = 52; /* ECC bits in nibbles per sector */
+ ecc_size1 = 0; /* non-ECC bits in nibbles per sector */
+ } else {
+ wr_mode = 0x01;
+ ecc_size0 = 0; /* extra bits in nibbles per sector */
+ ecc_size1 = 52; /* OOB bits in nibbles per sector */
+ }
+ break;
+ default:
+ return;
+ }
+
+ writel(ECC1, info->reg.gpmc_ecc_control);
+
+ /* Configure ecc size for BCH */
+ val = (ecc_size1 << ECCSIZE1_SHIFT) | (ecc_size0 << ECCSIZE0_SHIFT);
+ writel(val, info->reg.gpmc_ecc_size_config);
+
+ dev_width = (chip->options & NAND_BUSWIDTH_16) ? 1 : 0;
+
+ /* BCH configuration */
+ val = ((1 << 16) | /* enable BCH */
+ (bch_type << 12) | /* BCH4/BCH8/BCH16 */
+ (wr_mode << 8) | /* wrap mode */
+ (dev_width << 7) | /* bus width */
+ (((nsectors-1) & 0x7) << 4) | /* number of sectors */
+ (info->gpmc_cs << 1) | /* ECC CS */
+ (0x1)); /* enable ECC */
+
+ writel(val, info->reg.gpmc_ecc_config);
+
+ /* Clear ecc and enable bits */
+ writel(ECCCLEAR | ECC1, info->reg.gpmc_ecc_control);
+}
+
+static u8 bch4_polynomial[] = {0x28, 0x13, 0xcc, 0x39, 0x96, 0xac, 0x7f};
+static u8 bch8_polynomial[] = {0xef, 0x51, 0x2e, 0x09, 0xed, 0x93, 0x9a, 0xc2,
+ 0x97, 0x79, 0xe5, 0x24, 0xb5};
+
+/**
+ * omap_calculate_ecc_bch - Generate bytes of ECC bytes
+ * @mtd: MTD device structure
+ * @dat: The pointer to data on which ecc is computed
+ * @ecc_code: The ecc_code buffer
+ *
+ * Support calculating of BCH4/8 ecc vectors for the page
+ */
+static int __maybe_unused omap_calculate_ecc_bch(struct mtd_info *mtd,
+ const u_char *dat, u_char *ecc_calc)
+{
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ int eccbytes = info->nand.ecc.bytes;
+ struct gpmc_nand_regs *gpmc_regs = &info->reg;
+ u8 *ecc_code;
+ unsigned long nsectors, bch_val1, bch_val2, bch_val3, bch_val4;
+ u32 val;
+ int i, j;
+
+ nsectors = ((readl(info->reg.gpmc_ecc_config) >> 4) & 0x7) + 1;
+ for (i = 0; i < nsectors; i++) {
+ ecc_code = ecc_calc;
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ case OMAP_ECC_BCH8_CODE_HW:
+ bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+ bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+ bch_val3 = readl(gpmc_regs->gpmc_bch_result2[i]);
+ bch_val4 = readl(gpmc_regs->gpmc_bch_result3[i]);
+ *ecc_code++ = (bch_val4 & 0xFF);
+ *ecc_code++ = ((bch_val3 >> 24) & 0xFF);
+ *ecc_code++ = ((bch_val3 >> 16) & 0xFF);
+ *ecc_code++ = ((bch_val3 >> 8) & 0xFF);
+ *ecc_code++ = (bch_val3 & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 24) & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 16) & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 8) & 0xFF);
+ *ecc_code++ = (bch_val2 & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 24) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 16) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 8) & 0xFF);
+ *ecc_code++ = (bch_val1 & 0xFF);
+ break;
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ case OMAP_ECC_BCH4_CODE_HW:
+ bch_val1 = readl(gpmc_regs->gpmc_bch_result0[i]);
+ bch_val2 = readl(gpmc_regs->gpmc_bch_result1[i]);
+ *ecc_code++ = ((bch_val2 >> 12) & 0xFF);
+ *ecc_code++ = ((bch_val2 >> 4) & 0xFF);
+ *ecc_code++ = ((bch_val2 & 0xF) << 4) |
+ ((bch_val1 >> 28) & 0xF);
+ *ecc_code++ = ((bch_val1 >> 20) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 12) & 0xFF);
+ *ecc_code++ = ((bch_val1 >> 4) & 0xFF);
+ *ecc_code++ = ((bch_val1 & 0xF) << 4);
+ break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ val = readl(gpmc_regs->gpmc_bch_result6[i]);
+ ecc_code[0] = ((val >> 8) & 0xFF);
+ ecc_code[1] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result5[i]);
+ ecc_code[2] = ((val >> 24) & 0xFF);
+ ecc_code[3] = ((val >> 16) & 0xFF);
+ ecc_code[4] = ((val >> 8) & 0xFF);
+ ecc_code[5] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result4[i]);
+ ecc_code[6] = ((val >> 24) & 0xFF);
+ ecc_code[7] = ((val >> 16) & 0xFF);
+ ecc_code[8] = ((val >> 8) & 0xFF);
+ ecc_code[9] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result3[i]);
+ ecc_code[10] = ((val >> 24) & 0xFF);
+ ecc_code[11] = ((val >> 16) & 0xFF);
+ ecc_code[12] = ((val >> 8) & 0xFF);
+ ecc_code[13] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result2[i]);
+ ecc_code[14] = ((val >> 24) & 0xFF);
+ ecc_code[15] = ((val >> 16) & 0xFF);
+ ecc_code[16] = ((val >> 8) & 0xFF);
+ ecc_code[17] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result1[i]);
+ ecc_code[18] = ((val >> 24) & 0xFF);
+ ecc_code[19] = ((val >> 16) & 0xFF);
+ ecc_code[20] = ((val >> 8) & 0xFF);
+ ecc_code[21] = ((val >> 0) & 0xFF);
+ val = readl(gpmc_regs->gpmc_bch_result0[i]);
+ ecc_code[22] = ((val >> 24) & 0xFF);
+ ecc_code[23] = ((val >> 16) & 0xFF);
+ ecc_code[24] = ((val >> 8) & 0xFF);
+ ecc_code[25] = ((val >> 0) & 0xFF);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* ECC scheme specific syndrome customizations */
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ /* Add constant polynomial to remainder, so that
+ * ECC of blank pages results in 0x0 on reading back */
+ for (j = 0; j < eccbytes; j++)
+ ecc_calc[j] ^= bch4_polynomial[j];
+ break;
+ case OMAP_ECC_BCH4_CODE_HW:
+ /* Set 8th ECC byte as 0x0 for ROM compatibility */
+ ecc_calc[eccbytes - 1] = 0x0;
+ break;
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ /* Add constant polynomial to remainder, so that
+ * ECC of blank pages results in 0x0 on reading back */
+ for (j = 0; j < eccbytes; j++)
+ ecc_calc[j] ^= bch8_polynomial[j];
+ break;
+ case OMAP_ECC_BCH8_CODE_HW:
+ /* Set 14th ECC byte as 0x0 for ROM compatibility */
+ ecc_calc[eccbytes - 1] = 0x0;
+ break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ecc_calc += eccbytes;
+ }
+
+ return 0;
+}
+
+/**
+ * erased_sector_bitflips - count bit flips
+ * @data: data sector buffer
+ * @oob: oob buffer
+ * @info: omap_nand_info
+ *
+ * Check the bit flips in erased page falls below correctable level.
+ * If falls below, report the page as erased with correctable bit
+ * flip, else report as uncorrectable page.
+ */
+static int erased_sector_bitflips(u_char *data, u_char *oob,
+ struct omap_nand_info *info)
+{
+ int flip_bits = 0, i;
+
+ for (i = 0; i < info->nand.ecc.size; i++) {
+ flip_bits += hweight8(~data[i]);
+ if (flip_bits > info->nand.ecc.strength)
+ return 0;
+ }
+
+ for (i = 0; i < info->nand.ecc.bytes - 1; i++) {
+ flip_bits += hweight8(~oob[i]);
+ if (flip_bits > info->nand.ecc.strength)
+ return 0;
+ }
+
+ /*
+ * Bit flips falls in correctable level.
+ * Fill data area with 0xFF
+ */
+ if (flip_bits) {
+ memset(data, 0xFF, info->nand.ecc.size);
+ memset(oob, 0xFF, info->nand.ecc.bytes);
+ }
+
+ return flip_bits;
+}
+
+/**
+ * omap_elm_correct_data - corrects page data area in case error reported
+ * @mtd: MTD device structure
+ * @data: page data
+ * @read_ecc: ecc read from nand flash
+ * @calc_ecc: ecc read from HW ECC registers
+ *
+ * Calculated ecc vector reported as zero in case of non-error pages.
+ * In case of non-zero ecc vector, first filter out erased-pages, and
+ * then process data via ELM to detect bit-flips.
+ */
+static int omap_elm_correct_data(struct mtd_info *mtd, u_char *data,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ struct nand_ecc_ctrl *ecc = &info->nand.ecc;
+ int eccsteps = info->nand.ecc.steps;
+ int i , j, stat = 0;
+ int eccflag, actual_eccbytes;
+ struct elm_errorvec err_vec[ERROR_VECTOR_MAX];
+ u_char *ecc_vec = calc_ecc;
+ u_char *spare_ecc = read_ecc;
+ u_char *erased_ecc_vec;
+ u_char *buf;
+ int bitflip_count;
+ bool is_error_reported = false;
+ u32 bit_pos, byte_pos, error_max, pos;
+ int err;
+
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW:
+ /* omit 7th ECC byte reserved for ROM code compatibility */
+ actual_eccbytes = ecc->bytes - 1;
+ erased_ecc_vec = bch4_vector;
+ break;
+ case OMAP_ECC_BCH8_CODE_HW:
+ /* omit 14th ECC byte reserved for ROM code compatibility */
+ actual_eccbytes = ecc->bytes - 1;
+ erased_ecc_vec = bch8_vector;
+ break;
+ case OMAP_ECC_BCH16_CODE_HW:
+ actual_eccbytes = ecc->bytes;
+ erased_ecc_vec = bch16_vector;
+ break;
+ default:
+ dev_err(&info->pdev->dev, "invalid driver configuration\n");
+ return -EINVAL;
+ }
+
+ /* Initialize elm error vector to zero */
+ memset(err_vec, 0, sizeof(err_vec));
+
+ for (i = 0; i < eccsteps ; i++) {
+ eccflag = 0; /* initialize eccflag */
+
+ /*
+ * Check any error reported,
+ * In case of error, non zero ecc reported.
+ */
+ for (j = 0; j < actual_eccbytes; j++) {
+ if (calc_ecc[j] != 0) {
+ eccflag = 1; /* non zero ecc, error present */
+ break;
+ }
+ }
+
+ if (eccflag == 1) {
+ if (memcmp(calc_ecc, erased_ecc_vec,
+ actual_eccbytes) == 0) {
+ /*
+ * calc_ecc[] matches pattern for ECC(all 0xff)
+ * so this is definitely an erased-page
+ */
+ } else {
+ buf = &data[info->nand.ecc.size * i];
+ /*
+ * count number of 0-bits in read_buf.
+ * This check can be removed once a similar
+ * check is introduced in generic NAND driver
+ */
+ bitflip_count = erased_sector_bitflips(
+ buf, read_ecc, info);
+ if (bitflip_count) {
+ /*
+ * number of 0-bits within ECC limits
+ * So this may be an erased-page
+ */
+ stat += bitflip_count;
+ } else {
+ /*
+ * Too many 0-bits. It may be a
+ * - programmed-page, OR
+ * - erased-page with many bit-flips
+ * So this page requires check by ELM
+ */
+ err_vec[i].error_reported = true;
+ is_error_reported = true;
+ }
+ }
+ }
+
+ /* Update the ecc vector */
+ calc_ecc += ecc->bytes;
+ read_ecc += ecc->bytes;
+ }
+
+ /* Check if any error reported */
+ if (!is_error_reported)
+ return stat;
+
+ /* Decode BCH error using ELM module */
+ elm_decode_bch_error_page(info->elm_dev, ecc_vec, err_vec);
+
+ err = 0;
+ for (i = 0; i < eccsteps; i++) {
+ if (err_vec[i].error_uncorrectable) {
+ dev_err(&info->pdev->dev,
+ "uncorrectable bit-flips found\n");
+ err = -EBADMSG;
+ } else if (err_vec[i].error_reported) {
+ for (j = 0; j < err_vec[i].error_count; j++) {
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW:
+ /* Add 4 bits to take care of padding */
+ pos = err_vec[i].error_loc[j] +
+ BCH4_BIT_PAD;
+ break;
+ case OMAP_ECC_BCH8_CODE_HW:
+ case OMAP_ECC_BCH16_CODE_HW:
+ pos = err_vec[i].error_loc[j];
+ break;
+ default:
+ return -EINVAL;
+ }
+ error_max = (ecc->size + actual_eccbytes) * 8;
+ /* Calculate bit position of error */
+ bit_pos = pos % 8;
+
+ /* Calculate byte position of error */
+ byte_pos = (error_max - pos - 1) / 8;
+
+ if (pos < error_max) {
+ if (byte_pos < 512) {
+ pr_debug("bitflip@dat[%d]=%x\n",
+ byte_pos, data[byte_pos]);
+ data[byte_pos] ^= 1 << bit_pos;
+ } else {
+ pr_debug("bitflip@oob[%d]=%x\n",
+ (byte_pos - 512),
+ spare_ecc[byte_pos - 512]);
+ spare_ecc[byte_pos - 512] ^=
+ 1 << bit_pos;
+ }
+ } else {
+ dev_err(&info->pdev->dev,
+ "invalid bit-flip @ %d:%d\n",
+ byte_pos, bit_pos);
+ err = -EBADMSG;
+ }
+ }
+ }
+
+ /* Update number of correctable errors */
+ stat += err_vec[i].error_count;
+
+ /* Update page data with sector size */
+ data += ecc->size;
+ spare_ecc += ecc->bytes;
+ }
+
+ return (err) ? err : stat;
+}
+
+/**
+ * omap_write_page_bch - BCH ecc based write page function for entire page
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: data buffer
+ * @oob_required: must write chip->oob_poi to OOB
+ * @page: page
+ *
+ * Custom write page method evolved to support multi sector writing in one shot
+ */
+static int omap_write_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
+{
+ int i;
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+
+ /* Enable GPMC ecc engine */
+ chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+ /* Write data */
+ chip->write_buf(mtd, buf, mtd->writesize);
+
+ /* Update ecc vector from GPMC result registers */
+ chip->ecc.calculate(mtd, buf, &ecc_calc[0]);
+
+ for (i = 0; i < chip->ecc.total; i++)
+ chip->oob_poi[eccpos[i]] = ecc_calc[i];
+
+ /* Write ecc vector to OOB area */
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+/**
+ * omap_read_page_bch - BCH ecc based page read function for entire page
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+ * @buf: buffer to store read data
+ * @oob_required: caller requires OOB data read to chip->oob_poi
+ * @page: page number to read
+ *
+ * For BCH ecc scheme, GPMC used for syndrome calculation and ELM module
+ * used for error correction.
+ * Custom method evolved to support ELM error correction & multi sector
+ * reading. On reading page data area is read along with OOB data with
+ * ecc engine enabled. ecc vector updated after read of OOB data.
+ * For non error pages ecc vector reported as zero.
+ */
+static int omap_read_page_bch(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ uint8_t *ecc_calc = chip->buffers->ecccalc;
+ uint8_t *ecc_code = chip->buffers->ecccode;
+ uint32_t *eccpos = chip->ecc.layout->eccpos;
+ uint8_t *oob = &chip->oob_poi[eccpos[0]];
+ uint32_t oob_pos = mtd->writesize + chip->ecc.layout->eccpos[0];
+ int stat;
+ unsigned int max_bitflips = 0;
+
+ /* Enable GPMC ecc engine */
+ chip->ecc.hwctl(mtd, NAND_ECC_READ);
+
+ /* Read data */
+ chip->read_buf(mtd, buf, mtd->writesize);
+
+ /* Read oob bytes */
+ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_pos, -1);
+ chip->read_buf(mtd, oob, chip->ecc.total);
+
+ /* Calculate ecc bytes */
+ chip->ecc.calculate(mtd, buf, ecc_calc);
+
+ memcpy(ecc_code, &chip->oob_poi[eccpos[0]], chip->ecc.total);
+
+ stat = chip->ecc.correct(mtd, buf, ecc_code, ecc_calc);
+
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ max_bitflips = max_t(unsigned int, max_bitflips, stat);
+ }
+
+ return max_bitflips;
+}
+
+/**
+ * is_elm_present - checks for presence of ELM module by scanning DT nodes
+ * @omap_nand_info: NAND device structure containing platform data
+ */
+static bool is_elm_present(struct omap_nand_info *info,
+ struct device_node *elm_node)
+{
+ struct platform_device *pdev;
+
+ /* check whether elm-id is passed via DT */
+ if (!elm_node) {
+ dev_err(&info->pdev->dev, "ELM devicetree node not found\n");
+ return false;
+ }
+ pdev = of_find_device_by_node(elm_node);
+ /* check whether ELM device is registered */
+ if (!pdev) {
+ dev_err(&info->pdev->dev, "ELM device not found\n");
+ return false;
+ }
+ /* ELM module available, now configure it */
+ info->elm_dev = &pdev->dev;
+ return true;
+}
+
+static bool omap2_nand_ecc_check(struct omap_nand_info *info,
+ struct omap_nand_platform_data *pdata)
+{
+ bool ecc_needs_bch, ecc_needs_omap_bch, ecc_needs_elm;
+
+ switch (info->ecc_opt) {
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ ecc_needs_omap_bch = false;
+ ecc_needs_bch = true;
+ ecc_needs_elm = false;
+ break;
+ case OMAP_ECC_BCH4_CODE_HW:
+ case OMAP_ECC_BCH8_CODE_HW:
+ case OMAP_ECC_BCH16_CODE_HW:
+ ecc_needs_omap_bch = true;
+ ecc_needs_bch = false;
+ ecc_needs_elm = true;
+ break;
+ default:
+ ecc_needs_omap_bch = false;
+ ecc_needs_bch = false;
+ ecc_needs_elm = false;
+ break;
+ }
+
+ if (ecc_needs_bch && !IS_ENABLED(CONFIG_MTD_NAND_ECC_BCH)) {
+ dev_err(&info->pdev->dev,
+ "CONFIG_MTD_NAND_ECC_BCH not enabled\n");
+ return false;
+ }
+ if (ecc_needs_omap_bch && !IS_ENABLED(CONFIG_MTD_NAND_OMAP_BCH)) {
+ dev_err(&info->pdev->dev,
+ "CONFIG_MTD_NAND_OMAP_BCH not enabled\n");
+ return false;
+ }
+ if (ecc_needs_elm && !is_elm_present(info, pdata->elm_of_node)) {
+ dev_err(&info->pdev->dev, "ELM not available\n");
+ return false;
+ }
+
+ return true;
+}
+
+static int omap_nand_probe(struct platform_device *pdev)
+{
+ struct omap_nand_info *info;
+ struct omap_nand_platform_data *pdata;
+ struct mtd_info *mtd;
+ struct nand_chip *nand_chip;
+ struct nand_ecclayout *ecclayout;
+ int err;
+ int i;
+ dma_cap_mask_t mask;
+ unsigned sig;
+ unsigned oob_index;
+ struct resource *res;
+ struct mtd_part_parser_data ppdata = {};
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "platform data missing\n");
+ return -ENODEV;
+ }
+
+ info = devm_kzalloc(&pdev->dev, sizeof(struct omap_nand_info),
+ GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, info);
+
+ info->pdev = pdev;
+ info->gpmc_cs = pdata->cs;
+ info->reg = pdata->reg;
+ info->of_node = pdata->of_node;
+ info->ecc_opt = pdata->ecc_opt;
+ mtd = &info->mtd;
+ mtd->priv = &info->nand;
+ mtd->dev.parent = &pdev->dev;
+ nand_chip = &info->nand;
+ nand_chip->ecc.priv = NULL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ nand_chip->IO_ADDR_R = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(nand_chip->IO_ADDR_R))
+ return PTR_ERR(nand_chip->IO_ADDR_R);
+
+ info->phys_base = res->start;
+
+ nand_chip->controller = &omap_gpmc_controller;
+
+ nand_chip->IO_ADDR_W = nand_chip->IO_ADDR_R;
+ nand_chip->cmd_ctrl = omap_hwcontrol;
+
+ /*
+ * If RDY/BSY line is connected to OMAP then use the omap ready
+ * function and the generic nand_wait function which reads the status
+ * register after monitoring the RDY/BSY line. Otherwise use a standard
+ * chip delay which is slightly more than tR (AC Timing) of the NAND
+ * device and read status register until you get a failure or success
+ */
+ if (pdata->dev_ready) {
+ nand_chip->dev_ready = omap_dev_ready;
+ nand_chip->chip_delay = 0;
+ } else {
+ nand_chip->waitfunc = omap_wait;
+ nand_chip->chip_delay = 50;
+ }
+
+ if (pdata->flash_bbt)
+ nand_chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB;
+ else
+ nand_chip->options |= NAND_SKIP_BBTSCAN;
+
+ /* scan NAND device connected to chip controller */
+ nand_chip->options |= pdata->devsize & NAND_BUSWIDTH_16;
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ dev_err(&info->pdev->dev, "scan failed, may be bus-width mismatch\n");
+ err = -ENXIO;
+ goto return_error;
+ }
+
+ /* re-populate low-level callbacks based on xfer modes */
+ switch (pdata->xfer_type) {
+ case NAND_OMAP_PREFETCH_POLLED:
+ nand_chip->read_buf = omap_read_buf_pref;
+ nand_chip->write_buf = omap_write_buf_pref;
+ break;
+
+ case NAND_OMAP_POLLED:
+ /* Use nand_base defaults for {read,write}_buf */
+ break;
+
+ case NAND_OMAP_PREFETCH_DMA:
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ sig = OMAP24XX_DMA_GPMC;
+ info->dma = dma_request_channel(mask, omap_dma_filter_fn, &sig);
+ if (!info->dma) {
+ dev_err(&pdev->dev, "DMA engine request failed\n");
+ err = -ENXIO;
+ goto return_error;
+ } else {
+ struct dma_slave_config cfg;
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.src_addr = info->phys_base;
+ cfg.dst_addr = info->phys_base;
+ cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ cfg.src_maxburst = 16;
+ cfg.dst_maxburst = 16;
+ err = dmaengine_slave_config(info->dma, &cfg);
+ if (err) {
+ dev_err(&pdev->dev, "DMA engine slave config failed: %d\n",
+ err);
+ goto return_error;
+ }
+ nand_chip->read_buf = omap_read_buf_dma_pref;
+ nand_chip->write_buf = omap_write_buf_dma_pref;
+ }
+ break;
+
+ case NAND_OMAP_PREFETCH_IRQ:
+ info->gpmc_irq_fifo = platform_get_irq(pdev, 0);
+ if (info->gpmc_irq_fifo <= 0) {
+ dev_err(&pdev->dev, "error getting fifo irq\n");
+ err = -ENODEV;
+ goto return_error;
+ }
+ err = devm_request_irq(&pdev->dev, info->gpmc_irq_fifo,
+ omap_nand_irq, IRQF_SHARED,
+ "gpmc-nand-fifo", info);
+ if (err) {
+ dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+ info->gpmc_irq_fifo, err);
+ info->gpmc_irq_fifo = 0;
+ goto return_error;
+ }
+
+ info->gpmc_irq_count = platform_get_irq(pdev, 1);
+ if (info->gpmc_irq_count <= 0) {
+ dev_err(&pdev->dev, "error getting count irq\n");
+ err = -ENODEV;
+ goto return_error;
+ }
+ err = devm_request_irq(&pdev->dev, info->gpmc_irq_count,
+ omap_nand_irq, IRQF_SHARED,
+ "gpmc-nand-count", info);
+ if (err) {
+ dev_err(&pdev->dev, "requesting irq(%d) error:%d",
+ info->gpmc_irq_count, err);
+ info->gpmc_irq_count = 0;
+ goto return_error;
+ }
+
+ nand_chip->read_buf = omap_read_buf_irq_pref;
+ nand_chip->write_buf = omap_write_buf_irq_pref;
+
+ break;
+
+ default:
+ dev_err(&pdev->dev,
+ "xfer_type(%d) not supported!\n", pdata->xfer_type);
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ if (!omap2_nand_ecc_check(info, pdata)) {
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ /* populate MTD interface based on ECC scheme */
+ ecclayout = &info->oobinfo;
+ switch (info->ecc_opt) {
+ case OMAP_ECC_HAM1_CODE_SW:
+ nand_chip->ecc.mode = NAND_ECC_SOFT;
+ break;
+
+ case OMAP_ECC_HAM1_CODE_HW:
+ pr_info("nand: using OMAP_ECC_HAM1_CODE_HW\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.bytes = 3;
+ nand_chip->ecc.size = 512;
+ nand_chip->ecc.strength = 1;
+ nand_chip->ecc.calculate = omap_calculate_ecc;
+ nand_chip->ecc.hwctl = omap_enable_hwecc;
+ nand_chip->ecc.correct = omap_correct_data;
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ if (nand_chip->options & NAND_BUSWIDTH_16)
+ oob_index = BADBLOCK_MARKER_LENGTH;
+ else
+ oob_index = 1;
+ for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
+ ecclayout->eccpos[i] = oob_index;
+ /* no reserved-marker in ecclayout for this ecc-scheme */
+ ecclayout->oobfree->offset =
+ ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+ break;
+
+ case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
+ pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ nand_chip->ecc.bytes = 7;
+ nand_chip->ecc.strength = 4;
+ nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
+ nand_chip->ecc.correct = nand_bch_correct_data;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch;
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ oob_index = BADBLOCK_MARKER_LENGTH;
+ for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) {
+ ecclayout->eccpos[i] = oob_index;
+ if (((i + 1) % nand_chip->ecc.bytes) == 0)
+ oob_index++;
+ }
+ /* include reserved-marker in ecclayout->oobfree calculation */
+ ecclayout->oobfree->offset = 1 +
+ ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+ /* software bch library is used for locating errors */
+ nand_chip->ecc.priv = nand_bch_init(mtd,
+ nand_chip->ecc.size,
+ nand_chip->ecc.bytes,
+ &ecclayout);
+ if (!nand_chip->ecc.priv) {
+ dev_err(&info->pdev->dev, "unable to use BCH library\n");
+ err = -EINVAL;
+ goto return_error;
+ }
+ break;
+
+ case OMAP_ECC_BCH4_CODE_HW:
+ pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ /* 14th bit is kept reserved for ROM-code compatibility */
+ nand_chip->ecc.bytes = 7 + 1;
+ nand_chip->ecc.strength = 4;
+ nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
+ nand_chip->ecc.correct = omap_elm_correct_data;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch;
+ nand_chip->ecc.read_page = omap_read_page_bch;
+ nand_chip->ecc.write_page = omap_write_page_bch;
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ oob_index = BADBLOCK_MARKER_LENGTH;
+ for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
+ ecclayout->eccpos[i] = oob_index;
+ /* reserved marker already included in ecclayout->eccbytes */
+ ecclayout->oobfree->offset =
+ ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+
+ err = elm_config(info->elm_dev, BCH4_ECC,
+ info->mtd.writesize / nand_chip->ecc.size,
+ nand_chip->ecc.size, nand_chip->ecc.bytes);
+ if (err < 0)
+ goto return_error;
+ break;
+
+ case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
+ pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ nand_chip->ecc.bytes = 13;
+ nand_chip->ecc.strength = 8;
+ nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
+ nand_chip->ecc.correct = nand_bch_correct_data;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch;
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ oob_index = BADBLOCK_MARKER_LENGTH;
+ for (i = 0; i < ecclayout->eccbytes; i++, oob_index++) {
+ ecclayout->eccpos[i] = oob_index;
+ if (((i + 1) % nand_chip->ecc.bytes) == 0)
+ oob_index++;
+ }
+ /* include reserved-marker in ecclayout->oobfree calculation */
+ ecclayout->oobfree->offset = 1 +
+ ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+ /* software bch library is used for locating errors */
+ nand_chip->ecc.priv = nand_bch_init(mtd,
+ nand_chip->ecc.size,
+ nand_chip->ecc.bytes,
+ &ecclayout);
+ if (!nand_chip->ecc.priv) {
+ dev_err(&info->pdev->dev, "unable to use BCH library\n");
+ err = -EINVAL;
+ goto return_error;
+ }
+ break;
+
+ case OMAP_ECC_BCH8_CODE_HW:
+ pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ /* 14th bit is kept reserved for ROM-code compatibility */
+ nand_chip->ecc.bytes = 13 + 1;
+ nand_chip->ecc.strength = 8;
+ nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
+ nand_chip->ecc.correct = omap_elm_correct_data;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch;
+ nand_chip->ecc.read_page = omap_read_page_bch;
+ nand_chip->ecc.write_page = omap_write_page_bch;
+
+ err = elm_config(info->elm_dev, BCH8_ECC,
+ info->mtd.writesize / nand_chip->ecc.size,
+ nand_chip->ecc.size, nand_chip->ecc.bytes);
+ if (err < 0)
+ goto return_error;
+
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ oob_index = BADBLOCK_MARKER_LENGTH;
+ for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
+ ecclayout->eccpos[i] = oob_index;
+ /* reserved marker already included in ecclayout->eccbytes */
+ ecclayout->oobfree->offset =
+ ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+ break;
+
+ case OMAP_ECC_BCH16_CODE_HW:
+ pr_info("using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ nand_chip->ecc.bytes = 26;
+ nand_chip->ecc.strength = 16;
+ nand_chip->ecc.hwctl = omap_enable_hwecc_bch;
+ nand_chip->ecc.correct = omap_elm_correct_data;
+ nand_chip->ecc.calculate = omap_calculate_ecc_bch;
+ nand_chip->ecc.read_page = omap_read_page_bch;
+ nand_chip->ecc.write_page = omap_write_page_bch;
+
+ err = elm_config(info->elm_dev, BCH16_ECC,
+ info->mtd.writesize / nand_chip->ecc.size,
+ nand_chip->ecc.size, nand_chip->ecc.bytes);
+ if (err < 0)
+ goto return_error;
+
+ /* define ECC layout */
+ ecclayout->eccbytes = nand_chip->ecc.bytes *
+ (mtd->writesize /
+ nand_chip->ecc.size);
+ oob_index = BADBLOCK_MARKER_LENGTH;
+ for (i = 0; i < ecclayout->eccbytes; i++, oob_index++)
+ ecclayout->eccpos[i] = oob_index;
+ /* reserved marker already included in ecclayout->eccbytes */
+ ecclayout->oobfree->offset =
+ ecclayout->eccpos[ecclayout->eccbytes - 1] + 1;
+ break;
+ default:
+ dev_err(&info->pdev->dev, "invalid or unsupported ECC scheme\n");
+ err = -EINVAL;
+ goto return_error;
+ }
+
+ if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW)
+ goto scan_tail;
+
+ /* all OOB bytes from oobfree->offset till end off OOB are free */
+ ecclayout->oobfree->length = mtd->oobsize - ecclayout->oobfree->offset;
+ /* check if NAND device's OOB is enough to store ECC signatures */
+ if (mtd->oobsize < (ecclayout->eccbytes + BADBLOCK_MARKER_LENGTH)) {
+ dev_err(&info->pdev->dev,
+ "not enough OOB bytes required = %d, available=%d\n",
+ ecclayout->eccbytes, mtd->oobsize);
+ err = -EINVAL;
+ goto return_error;
+ }
+ nand_chip->ecc.layout = ecclayout;
+
+scan_tail:
+ /* second phase scan */
+ if (nand_scan_tail(mtd)) {
+ err = -ENXIO;
+ goto return_error;
+ }
+
+ ppdata.of_node = pdata->of_node;
+ mtd_device_parse_register(mtd, NULL, &ppdata, pdata->parts,
+ pdata->nr_parts);
+
+ platform_set_drvdata(pdev, mtd);
+
+ return 0;
+
+return_error:
+ if (info->dma)
+ dma_release_channel(info->dma);
+ if (nand_chip->ecc.priv) {
+ nand_bch_free(nand_chip->ecc.priv);
+ nand_chip->ecc.priv = NULL;
+ }
+ return err;
+}
+
+static int omap_nand_remove(struct platform_device *pdev)
+{
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct nand_chip *nand_chip = mtd->priv;
+ struct omap_nand_info *info = container_of(mtd, struct omap_nand_info,
+ mtd);
+ if (nand_chip->ecc.priv) {
+ nand_bch_free(nand_chip->ecc.priv);
+ nand_chip->ecc.priv = NULL;
+ }
+ if (info->dma)
+ dma_release_channel(info->dma);
+ nand_release(mtd);
+ return 0;
+}
+
+static struct platform_driver omap_nand_driver = {
+ .probe = omap_nand_probe,
+ .remove = omap_nand_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+module_platform_driver(omap_nand_driver);
+
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Glue layer for NAND flash on TI OMAP boards");
diff --git a/drivers/mtd/nand/omap_elm.c b/drivers/mtd/nand/omap_elm.c
new file mode 100644
index 0000000..235ec79
--- /dev/null
+++ b/drivers/mtd/nand/omap_elm.c
@@ -0,0 +1,578 @@
+/*
+ * Error Location Module
+ *
+ * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#define DRIVER_NAME "omap-elm"
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/sched.h>
+#include <linux/pm_runtime.h>
+#include <linux/platform_data/elm.h>
+
+#define ELM_SYSCONFIG 0x010
+#define ELM_IRQSTATUS 0x018
+#define ELM_IRQENABLE 0x01c
+#define ELM_LOCATION_CONFIG 0x020
+#define ELM_PAGE_CTRL 0x080
+#define ELM_SYNDROME_FRAGMENT_0 0x400
+#define ELM_SYNDROME_FRAGMENT_1 0x404
+#define ELM_SYNDROME_FRAGMENT_2 0x408
+#define ELM_SYNDROME_FRAGMENT_3 0x40c
+#define ELM_SYNDROME_FRAGMENT_4 0x410
+#define ELM_SYNDROME_FRAGMENT_5 0x414
+#define ELM_SYNDROME_FRAGMENT_6 0x418
+#define ELM_LOCATION_STATUS 0x800
+#define ELM_ERROR_LOCATION_0 0x880
+
+/* ELM Interrupt Status Register */
+#define INTR_STATUS_PAGE_VALID BIT(8)
+
+/* ELM Interrupt Enable Register */
+#define INTR_EN_PAGE_MASK BIT(8)
+
+/* ELM Location Configuration Register */
+#define ECC_BCH_LEVEL_MASK 0x3
+
+/* ELM syndrome */
+#define ELM_SYNDROME_VALID BIT(16)
+
+/* ELM_LOCATION_STATUS Register */
+#define ECC_CORRECTABLE_MASK BIT(8)
+#define ECC_NB_ERRORS_MASK 0x1f
+
+/* ELM_ERROR_LOCATION_0-15 Registers */
+#define ECC_ERROR_LOCATION_MASK 0x1fff
+
+#define ELM_ECC_SIZE 0x7ff
+
+#define SYNDROME_FRAGMENT_REG_SIZE 0x40
+#define ERROR_LOCATION_SIZE 0x100
+
+struct elm_registers {
+ u32 elm_irqenable;
+ u32 elm_sysconfig;
+ u32 elm_location_config;
+ u32 elm_page_ctrl;
+ u32 elm_syndrome_fragment_6[ERROR_VECTOR_MAX];
+ u32 elm_syndrome_fragment_5[ERROR_VECTOR_MAX];
+ u32 elm_syndrome_fragment_4[ERROR_VECTOR_MAX];
+ u32 elm_syndrome_fragment_3[ERROR_VECTOR_MAX];
+ u32 elm_syndrome_fragment_2[ERROR_VECTOR_MAX];
+ u32 elm_syndrome_fragment_1[ERROR_VECTOR_MAX];
+ u32 elm_syndrome_fragment_0[ERROR_VECTOR_MAX];
+};
+
+struct elm_info {
+ struct device *dev;
+ void __iomem *elm_base;
+ struct completion elm_completion;
+ struct list_head list;
+ enum bch_ecc bch_type;
+ struct elm_registers elm_regs;
+ int ecc_steps;
+ int ecc_syndrome_size;
+};
+
+static LIST_HEAD(elm_devices);
+
+static void elm_write_reg(struct elm_info *info, int offset, u32 val)
+{
+ writel(val, info->elm_base + offset);
+}
+
+static u32 elm_read_reg(struct elm_info *info, int offset)
+{
+ return readl(info->elm_base + offset);
+}
+
+/**
+ * elm_config - Configure ELM module
+ * @dev: ELM device
+ * @bch_type: Type of BCH ecc
+ */
+int elm_config(struct device *dev, enum bch_ecc bch_type,
+ int ecc_steps, int ecc_step_size, int ecc_syndrome_size)
+{
+ u32 reg_val;
+ struct elm_info *info = dev_get_drvdata(dev);
+
+ if (!info) {
+ dev_err(dev, "Unable to configure elm - device not probed?\n");
+ return -EPROBE_DEFER;
+ }
+ /* ELM cannot detect ECC errors for chunks > 1KB */
+ if (ecc_step_size > ((ELM_ECC_SIZE + 1) / 2)) {
+ dev_err(dev, "unsupported config ecc-size=%d\n", ecc_step_size);
+ return -EINVAL;
+ }
+ /* ELM support 8 error syndrome process */
+ if (ecc_steps > ERROR_VECTOR_MAX) {
+ dev_err(dev, "unsupported config ecc-step=%d\n", ecc_steps);
+ return -EINVAL;
+ }
+
+ reg_val = (bch_type & ECC_BCH_LEVEL_MASK) | (ELM_ECC_SIZE << 16);
+ elm_write_reg(info, ELM_LOCATION_CONFIG, reg_val);
+ info->bch_type = bch_type;
+ info->ecc_steps = ecc_steps;
+ info->ecc_syndrome_size = ecc_syndrome_size;
+
+ return 0;
+}
+EXPORT_SYMBOL(elm_config);
+
+/**
+ * elm_configure_page_mode - Enable/Disable page mode
+ * @info: elm info
+ * @index: index number of syndrome fragment vector
+ * @enable: enable/disable flag for page mode
+ *
+ * Enable page mode for syndrome fragment index
+ */
+static void elm_configure_page_mode(struct elm_info *info, int index,
+ bool enable)
+{
+ u32 reg_val;
+
+ reg_val = elm_read_reg(info, ELM_PAGE_CTRL);
+ if (enable)
+ reg_val |= BIT(index); /* enable page mode */
+ else
+ reg_val &= ~BIT(index); /* disable page mode */
+
+ elm_write_reg(info, ELM_PAGE_CTRL, reg_val);
+}
+
+/**
+ * elm_load_syndrome - Load ELM syndrome reg
+ * @info: elm info
+ * @err_vec: elm error vectors
+ * @ecc: buffer with calculated ecc
+ *
+ * Load syndrome fragment registers with calculated ecc in reverse order.
+ */
+static void elm_load_syndrome(struct elm_info *info,
+ struct elm_errorvec *err_vec, u8 *ecc)
+{
+ int i, offset;
+ u32 val;
+
+ for (i = 0; i < info->ecc_steps; i++) {
+
+ /* Check error reported */
+ if (err_vec[i].error_reported) {
+ elm_configure_page_mode(info, i, true);
+ offset = ELM_SYNDROME_FRAGMENT_0 +
+ SYNDROME_FRAGMENT_REG_SIZE * i;
+ switch (info->bch_type) {
+ case BCH8_ECC:
+ /* syndrome fragment 0 = ecc[9-12B] */
+ val = cpu_to_be32(*(u32 *) &ecc[9]);
+ elm_write_reg(info, offset, val);
+
+ /* syndrome fragment 1 = ecc[5-8B] */
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[5]);
+ elm_write_reg(info, offset, val);
+
+ /* syndrome fragment 2 = ecc[1-4B] */
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[1]);
+ elm_write_reg(info, offset, val);
+
+ /* syndrome fragment 3 = ecc[0B] */
+ offset += 4;
+ val = ecc[0];
+ elm_write_reg(info, offset, val);
+ break;
+ case BCH4_ECC:
+ /* syndrome fragment 0 = ecc[20-52b] bits */
+ val = (cpu_to_be32(*(u32 *) &ecc[3]) >> 4) |
+ ((ecc[2] & 0xf) << 28);
+ elm_write_reg(info, offset, val);
+
+ /* syndrome fragment 1 = ecc[0-20b] bits */
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[0]) >> 12;
+ elm_write_reg(info, offset, val);
+ break;
+ case BCH16_ECC:
+ val = cpu_to_be32(*(u32 *) &ecc[22]);
+ elm_write_reg(info, offset, val);
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[18]);
+ elm_write_reg(info, offset, val);
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[14]);
+ elm_write_reg(info, offset, val);
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[10]);
+ elm_write_reg(info, offset, val);
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[6]);
+ elm_write_reg(info, offset, val);
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[2]);
+ elm_write_reg(info, offset, val);
+ offset += 4;
+ val = cpu_to_be32(*(u32 *) &ecc[0]) >> 16;
+ elm_write_reg(info, offset, val);
+ break;
+ default:
+ pr_err("invalid config bch_type\n");
+ }
+ }
+
+ /* Update ecc pointer with ecc byte size */
+ ecc += info->ecc_syndrome_size;
+ }
+}
+
+/**
+ * elm_start_processing - start elm syndrome processing
+ * @info: elm info
+ * @err_vec: elm error vectors
+ *
+ * Set syndrome valid bit for syndrome fragment registers for which
+ * elm syndrome fragment registers are loaded. This enables elm module
+ * to start processing syndrome vectors.
+ */
+static void elm_start_processing(struct elm_info *info,
+ struct elm_errorvec *err_vec)
+{
+ int i, offset;
+ u32 reg_val;
+
+ /*
+ * Set syndrome vector valid, so that ELM module
+ * will process it for vectors error is reported
+ */
+ for (i = 0; i < info->ecc_steps; i++) {
+ if (err_vec[i].error_reported) {
+ offset = ELM_SYNDROME_FRAGMENT_6 +
+ SYNDROME_FRAGMENT_REG_SIZE * i;
+ reg_val = elm_read_reg(info, offset);
+ reg_val |= ELM_SYNDROME_VALID;
+ elm_write_reg(info, offset, reg_val);
+ }
+ }
+}
+
+/**
+ * elm_error_correction - locate correctable error position
+ * @info: elm info
+ * @err_vec: elm error vectors
+ *
+ * On completion of processing by elm module, error location status
+ * register updated with correctable/uncorrectable error information.
+ * In case of correctable errors, number of errors located from
+ * elm location status register & read the positions from
+ * elm error location register.
+ */
+static void elm_error_correction(struct elm_info *info,
+ struct elm_errorvec *err_vec)
+{
+ int i, j, errors = 0;
+ int offset;
+ u32 reg_val;
+
+ for (i = 0; i < info->ecc_steps; i++) {
+
+ /* Check error reported */
+ if (err_vec[i].error_reported) {
+ offset = ELM_LOCATION_STATUS + ERROR_LOCATION_SIZE * i;
+ reg_val = elm_read_reg(info, offset);
+
+ /* Check correctable error or not */
+ if (reg_val & ECC_CORRECTABLE_MASK) {
+ offset = ELM_ERROR_LOCATION_0 +
+ ERROR_LOCATION_SIZE * i;
+
+ /* Read count of correctable errors */
+ err_vec[i].error_count = reg_val &
+ ECC_NB_ERRORS_MASK;
+
+ /* Update the error locations in error vector */
+ for (j = 0; j < err_vec[i].error_count; j++) {
+
+ reg_val = elm_read_reg(info, offset);
+ err_vec[i].error_loc[j] = reg_val &
+ ECC_ERROR_LOCATION_MASK;
+
+ /* Update error location register */
+ offset += 4;
+ }
+
+ errors += err_vec[i].error_count;
+ } else {
+ err_vec[i].error_uncorrectable = true;
+ }
+
+ /* Clearing interrupts for processed error vectors */
+ elm_write_reg(info, ELM_IRQSTATUS, BIT(i));
+
+ /* Disable page mode */
+ elm_configure_page_mode(info, i, false);
+ }
+ }
+}
+
+/**
+ * elm_decode_bch_error_page - Locate error position
+ * @dev: device pointer
+ * @ecc_calc: calculated ECC bytes from GPMC
+ * @err_vec: elm error vectors
+ *
+ * Called with one or more error reported vectors & vectors with
+ * error reported is updated in err_vec[].error_reported
+ */
+void elm_decode_bch_error_page(struct device *dev, u8 *ecc_calc,
+ struct elm_errorvec *err_vec)
+{
+ struct elm_info *info = dev_get_drvdata(dev);
+ u32 reg_val;
+
+ /* Enable page mode interrupt */
+ reg_val = elm_read_reg(info, ELM_IRQSTATUS);
+ elm_write_reg(info, ELM_IRQSTATUS, reg_val & INTR_STATUS_PAGE_VALID);
+ elm_write_reg(info, ELM_IRQENABLE, INTR_EN_PAGE_MASK);
+
+ /* Load valid ecc byte to syndrome fragment register */
+ elm_load_syndrome(info, err_vec, ecc_calc);
+
+ /* Enable syndrome processing for which syndrome fragment is updated */
+ elm_start_processing(info, err_vec);
+
+ /* Wait for ELM module to finish locating error correction */
+ wait_for_completion(&info->elm_completion);
+
+ /* Disable page mode interrupt */
+ reg_val = elm_read_reg(info, ELM_IRQENABLE);
+ elm_write_reg(info, ELM_IRQENABLE, reg_val & ~INTR_EN_PAGE_MASK);
+ elm_error_correction(info, err_vec);
+}
+EXPORT_SYMBOL(elm_decode_bch_error_page);
+
+static irqreturn_t elm_isr(int this_irq, void *dev_id)
+{
+ u32 reg_val;
+ struct elm_info *info = dev_id;
+
+ reg_val = elm_read_reg(info, ELM_IRQSTATUS);
+
+ /* All error vectors processed */
+ if (reg_val & INTR_STATUS_PAGE_VALID) {
+ elm_write_reg(info, ELM_IRQSTATUS,
+ reg_val & INTR_STATUS_PAGE_VALID);
+ complete(&info->elm_completion);
+ return IRQ_HANDLED;
+ }
+
+ return IRQ_NONE;
+}
+
+static int elm_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct resource *res, *irq;
+ struct elm_info *info;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->dev = &pdev->dev;
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq) {
+ dev_err(&pdev->dev, "no irq resource defined\n");
+ return -ENODEV;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->elm_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(info->elm_base))
+ return PTR_ERR(info->elm_base);
+
+ ret = devm_request_irq(&pdev->dev, irq->start, elm_isr, 0,
+ pdev->name, info);
+ if (ret) {
+ dev_err(&pdev->dev, "failure requesting irq %i\n", irq->start);
+ return ret;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+ if (pm_runtime_get_sync(&pdev->dev) < 0) {
+ ret = -EINVAL;
+ pm_runtime_disable(&pdev->dev);
+ dev_err(&pdev->dev, "can't enable clock\n");
+ return ret;
+ }
+
+ init_completion(&info->elm_completion);
+ INIT_LIST_HEAD(&info->list);
+ list_add(&info->list, &elm_devices);
+ platform_set_drvdata(pdev, info);
+ return ret;
+}
+
+static int elm_remove(struct platform_device *pdev)
+{
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+/**
+ * elm_context_save
+ * saves ELM configurations to preserve them across Hardware powered-down
+ */
+static int elm_context_save(struct elm_info *info)
+{
+ struct elm_registers *regs = &info->elm_regs;
+ enum bch_ecc bch_type = info->bch_type;
+ u32 offset = 0, i;
+
+ regs->elm_irqenable = elm_read_reg(info, ELM_IRQENABLE);
+ regs->elm_sysconfig = elm_read_reg(info, ELM_SYSCONFIG);
+ regs->elm_location_config = elm_read_reg(info, ELM_LOCATION_CONFIG);
+ regs->elm_page_ctrl = elm_read_reg(info, ELM_PAGE_CTRL);
+ for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+ offset = i * SYNDROME_FRAGMENT_REG_SIZE;
+ switch (bch_type) {
+ case BCH16_ECC:
+ regs->elm_syndrome_fragment_6[i] = elm_read_reg(info,
+ ELM_SYNDROME_FRAGMENT_6 + offset);
+ regs->elm_syndrome_fragment_5[i] = elm_read_reg(info,
+ ELM_SYNDROME_FRAGMENT_5 + offset);
+ regs->elm_syndrome_fragment_4[i] = elm_read_reg(info,
+ ELM_SYNDROME_FRAGMENT_4 + offset);
+ case BCH8_ECC:
+ regs->elm_syndrome_fragment_3[i] = elm_read_reg(info,
+ ELM_SYNDROME_FRAGMENT_3 + offset);
+ regs->elm_syndrome_fragment_2[i] = elm_read_reg(info,
+ ELM_SYNDROME_FRAGMENT_2 + offset);
+ case BCH4_ECC:
+ regs->elm_syndrome_fragment_1[i] = elm_read_reg(info,
+ ELM_SYNDROME_FRAGMENT_1 + offset);
+ regs->elm_syndrome_fragment_0[i] = elm_read_reg(info,
+ ELM_SYNDROME_FRAGMENT_0 + offset);
+ break;
+ default:
+ return -EINVAL;
+ }
+ /* ELM SYNDROME_VALID bit in SYNDROME_FRAGMENT_6[] needs
+ * to be saved for all BCH schemes*/
+ regs->elm_syndrome_fragment_6[i] = elm_read_reg(info,
+ ELM_SYNDROME_FRAGMENT_6 + offset);
+ }
+ return 0;
+}
+
+/**
+ * elm_context_restore
+ * writes configurations saved duing power-down back into ELM registers
+ */
+static int elm_context_restore(struct elm_info *info)
+{
+ struct elm_registers *regs = &info->elm_regs;
+ enum bch_ecc bch_type = info->bch_type;
+ u32 offset = 0, i;
+
+ elm_write_reg(info, ELM_IRQENABLE, regs->elm_irqenable);
+ elm_write_reg(info, ELM_SYSCONFIG, regs->elm_sysconfig);
+ elm_write_reg(info, ELM_LOCATION_CONFIG, regs->elm_location_config);
+ elm_write_reg(info, ELM_PAGE_CTRL, regs->elm_page_ctrl);
+ for (i = 0; i < ERROR_VECTOR_MAX; i++) {
+ offset = i * SYNDROME_FRAGMENT_REG_SIZE;
+ switch (bch_type) {
+ case BCH16_ECC:
+ elm_write_reg(info, ELM_SYNDROME_FRAGMENT_6 + offset,
+ regs->elm_syndrome_fragment_6[i]);
+ elm_write_reg(info, ELM_SYNDROME_FRAGMENT_5 + offset,
+ regs->elm_syndrome_fragment_5[i]);
+ elm_write_reg(info, ELM_SYNDROME_FRAGMENT_4 + offset,
+ regs->elm_syndrome_fragment_4[i]);
+ case BCH8_ECC:
+ elm_write_reg(info, ELM_SYNDROME_FRAGMENT_3 + offset,
+ regs->elm_syndrome_fragment_3[i]);
+ elm_write_reg(info, ELM_SYNDROME_FRAGMENT_2 + offset,
+ regs->elm_syndrome_fragment_2[i]);
+ case BCH4_ECC:
+ elm_write_reg(info, ELM_SYNDROME_FRAGMENT_1 + offset,
+ regs->elm_syndrome_fragment_1[i]);
+ elm_write_reg(info, ELM_SYNDROME_FRAGMENT_0 + offset,
+ regs->elm_syndrome_fragment_0[i]);
+ break;
+ default:
+ return -EINVAL;
+ }
+ /* ELM_SYNDROME_VALID bit to be set in last to trigger FSM */
+ elm_write_reg(info, ELM_SYNDROME_FRAGMENT_6 + offset,
+ regs->elm_syndrome_fragment_6[i] &
+ ELM_SYNDROME_VALID);
+ }
+ return 0;
+}
+
+static int elm_suspend(struct device *dev)
+{
+ struct elm_info *info = dev_get_drvdata(dev);
+ elm_context_save(info);
+ pm_runtime_put_sync(dev);
+ return 0;
+}
+
+static int elm_resume(struct device *dev)
+{
+ struct elm_info *info = dev_get_drvdata(dev);
+ pm_runtime_get_sync(dev);
+ elm_context_restore(info);
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(elm_pm_ops, elm_suspend, elm_resume);
+
+#ifdef CONFIG_OF
+static const struct of_device_id elm_of_match[] = {
+ { .compatible = "ti,am3352-elm" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, elm_of_match);
+#endif
+
+static struct platform_driver elm_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(elm_of_match),
+ .pm = &elm_pm_ops,
+ },
+ .probe = elm_probe,
+ .remove = elm_remove,
+};
+
+module_platform_driver(elm_driver);
+
+MODULE_DESCRIPTION("ELM driver for BCH error correction");
+MODULE_AUTHOR("Texas Instruments");
+MODULE_ALIAS("platform:" DRIVER_NAME);
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c
new file mode 100644
index 0000000..ee83749
--- /dev/null
+++ b/drivers/mtd/nand/orion_nand.c
@@ -0,0 +1,220 @@
+/*
+ * drivers/mtd/nand/orion_nand.c
+ *
+ * NAND support for Marvell Orion SoC platforms
+ *
+ * Tzachi Perelstein <tzachi@marvell.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <asm/sizes.h>
+#include <linux/platform_data/mtd-orion_nand.h>
+
+static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *nc = mtd->priv;
+ struct orion_nand_data *board = nc->priv;
+ u32 offs;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ offs = (1 << board->cle);
+ else if (ctrl & NAND_ALE)
+ offs = (1 << board->ale);
+ else
+ return;
+
+ if (nc->options & NAND_BUSWIDTH_16)
+ offs <<= 1;
+
+ writeb(cmd, nc->IO_ADDR_W + offs);
+}
+
+static void orion_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+ void __iomem *io_base = chip->IO_ADDR_R;
+ uint64_t *buf64;
+ int i = 0;
+
+ while (len && (unsigned long)buf & 7) {
+ *buf++ = readb(io_base);
+ len--;
+ }
+ buf64 = (uint64_t *)buf;
+ while (i < len/8) {
+ /*
+ * Since GCC has no proper constraint (PR 43518)
+ * force x variable to r2/r3 registers as ldrd instruction
+ * requires first register to be even.
+ */
+ register uint64_t x asm ("r2");
+
+ asm volatile ("ldrd\t%0, [%1]" : "=&r" (x) : "r" (io_base));
+ buf64[i++] = x;
+ }
+ i *= 8;
+ while (i < len)
+ buf[i++] = readb(io_base);
+}
+
+static int __init orion_nand_probe(struct platform_device *pdev)
+{
+ struct mtd_info *mtd;
+ struct mtd_part_parser_data ppdata = {};
+ struct nand_chip *nc;
+ struct orion_nand_data *board;
+ struct resource *res;
+ struct clk *clk;
+ void __iomem *io_base;
+ int ret = 0;
+ u32 val = 0;
+
+ nc = devm_kzalloc(&pdev->dev,
+ sizeof(struct nand_chip) + sizeof(struct mtd_info),
+ GFP_KERNEL);
+ if (!nc)
+ return -ENOMEM;
+ mtd = (struct mtd_info *)(nc + 1);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ io_base = devm_ioremap_resource(&pdev->dev, res);
+
+ if (IS_ERR(io_base))
+ return PTR_ERR(io_base);
+
+ if (pdev->dev.of_node) {
+ board = devm_kzalloc(&pdev->dev, sizeof(struct orion_nand_data),
+ GFP_KERNEL);
+ if (!board)
+ return -ENOMEM;
+ if (!of_property_read_u32(pdev->dev.of_node, "cle", &val))
+ board->cle = (u8)val;
+ else
+ board->cle = 0;
+ if (!of_property_read_u32(pdev->dev.of_node, "ale", &val))
+ board->ale = (u8)val;
+ else
+ board->ale = 1;
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "bank-width", &val))
+ board->width = (u8)val * 8;
+ else
+ board->width = 8;
+ if (!of_property_read_u32(pdev->dev.of_node,
+ "chip-delay", &val))
+ board->chip_delay = (u8)val;
+ } else {
+ board = dev_get_platdata(&pdev->dev);
+ }
+
+ mtd->priv = nc;
+ mtd->dev.parent = &pdev->dev;
+
+ nc->priv = board;
+ nc->IO_ADDR_R = nc->IO_ADDR_W = io_base;
+ nc->cmd_ctrl = orion_nand_cmd_ctrl;
+ nc->read_buf = orion_nand_read_buf;
+ nc->ecc.mode = NAND_ECC_SOFT;
+
+ if (board->chip_delay)
+ nc->chip_delay = board->chip_delay;
+
+ WARN(board->width > 16,
+ "%d bit bus width out of range",
+ board->width);
+
+ if (board->width == 16)
+ nc->options |= NAND_BUSWIDTH_16;
+
+ if (board->dev_ready)
+ nc->dev_ready = board->dev_ready;
+
+ platform_set_drvdata(pdev, mtd);
+
+ /* Not all platforms can gate the clock, so it is not
+ an error if the clock does not exists. */
+ clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(clk)) {
+ clk_prepare_enable(clk);
+ clk_put(clk);
+ }
+
+ if (nand_scan(mtd, 1)) {
+ ret = -ENXIO;
+ goto no_dev;
+ }
+
+ mtd->name = "orion_nand";
+ ppdata.of_node = pdev->dev.of_node;
+ ret = mtd_device_parse_register(mtd, NULL, &ppdata,
+ board->parts, board->nr_parts);
+ if (ret) {
+ nand_release(mtd);
+ goto no_dev;
+ }
+
+ return 0;
+
+no_dev:
+ if (!IS_ERR(clk)) {
+ clk_disable_unprepare(clk);
+ clk_put(clk);
+ }
+
+ return ret;
+}
+
+static int orion_nand_remove(struct platform_device *pdev)
+{
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct clk *clk;
+
+ nand_release(mtd);
+
+ clk = clk_get(&pdev->dev, NULL);
+ if (!IS_ERR(clk)) {
+ clk_disable_unprepare(clk);
+ clk_put(clk);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id orion_nand_of_match_table[] = {
+ { .compatible = "marvell,orion-nand", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, orion_nand_of_match_table);
+#endif
+
+static struct platform_driver orion_nand_driver = {
+ .remove = orion_nand_remove,
+ .driver = {
+ .name = "orion_nand",
+ .of_match_table = of_match_ptr(orion_nand_of_match_table),
+ },
+};
+
+module_platform_driver_probe(orion_nand_driver, orion_nand_probe);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Tzachi Perelstein");
+MODULE_DESCRIPTION("NAND glue for Orion platforms");
+MODULE_ALIAS("platform:orion_nand");
diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c
new file mode 100644
index 0000000..83cf021
--- /dev/null
+++ b/drivers/mtd/nand/pasemi_nand.c
@@ -0,0 +1,236 @@
+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Author: Egor Martovetsky <egor@pasemi.com>
+ * Maintained by: Olof Johansson <olof@lixom.net>
+ *
+ * Driver for the PWRficient onchip NAND flash interface
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#undef DEBUG
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pci.h>
+
+#include <asm/io.h>
+
+#define LBICTRL_LPCCTL_NR 0x00004000
+#define CLE_PIN_CTL 15
+#define ALE_PIN_CTL 14
+
+static unsigned int lpcctl;
+static struct mtd_info *pasemi_nand_mtd;
+static const char driver_name[] = "pasemi-nand";
+
+static void pasemi_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ while (len > 0x800) {
+ memcpy_fromio(buf, chip->IO_ADDR_R, 0x800);
+ buf += 0x800;
+ len -= 0x800;
+ }
+ memcpy_fromio(buf, chip->IO_ADDR_R, len);
+}
+
+static void pasemi_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ while (len > 0x800) {
+ memcpy_toio(chip->IO_ADDR_R, buf, 0x800);
+ buf += 0x800;
+ len -= 0x800;
+ }
+ memcpy_toio(chip->IO_ADDR_R, buf, len);
+}
+
+static void pasemi_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ out_8(chip->IO_ADDR_W + (1 << CLE_PIN_CTL), cmd);
+ else
+ out_8(chip->IO_ADDR_W + (1 << ALE_PIN_CTL), cmd);
+
+ /* Push out posted writes */
+ eieio();
+ inl(lpcctl);
+}
+
+int pasemi_device_ready(struct mtd_info *mtd)
+{
+ return !!(inl(lpcctl) & LBICTRL_LPCCTL_NR);
+}
+
+static int pasemi_nand_probe(struct platform_device *ofdev)
+{
+ struct pci_dev *pdev;
+ struct device_node *np = ofdev->dev.of_node;
+ struct resource res;
+ struct nand_chip *chip;
+ int err = 0;
+
+ err = of_address_to_resource(np, 0, &res);
+
+ if (err)
+ return -EINVAL;
+
+ /* We only support one device at the moment */
+ if (pasemi_nand_mtd)
+ return -ENODEV;
+
+ pr_debug("pasemi_nand at %pR\n", &res);
+
+ /* Allocate memory for MTD device structure and private data */
+ pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) +
+ sizeof(struct nand_chip), GFP_KERNEL);
+ if (!pasemi_nand_mtd) {
+ printk(KERN_WARNING
+ "Unable to allocate PASEMI NAND MTD device structure\n");
+ err = -ENOMEM;
+ goto out;
+ }
+
+ /* Get pointer to private data */
+ chip = (struct nand_chip *)&pasemi_nand_mtd[1];
+
+ /* Link the private data with the MTD structure */
+ pasemi_nand_mtd->priv = chip;
+ pasemi_nand_mtd->dev.parent = &ofdev->dev;
+
+ chip->IO_ADDR_R = of_iomap(np, 0);
+ chip->IO_ADDR_W = chip->IO_ADDR_R;
+
+ if (!chip->IO_ADDR_R) {
+ err = -EIO;
+ goto out_mtd;
+ }
+
+ pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa008, NULL);
+ if (!pdev) {
+ err = -ENODEV;
+ goto out_ior;
+ }
+
+ lpcctl = pci_resource_start(pdev, 0);
+ pci_dev_put(pdev);
+
+ if (!request_region(lpcctl, 4, driver_name)) {
+ err = -EBUSY;
+ goto out_ior;
+ }
+
+ chip->cmd_ctrl = pasemi_hwcontrol;
+ chip->dev_ready = pasemi_device_ready;
+ chip->read_buf = pasemi_read_buf;
+ chip->write_buf = pasemi_write_buf;
+ chip->chip_delay = 0;
+ chip->ecc.mode = NAND_ECC_SOFT;
+
+ /* Enable the following for a flash based bad block table */
+ chip->bbt_options = NAND_BBT_USE_FLASH;
+
+ /* Scan to find existence of the device */
+ if (nand_scan(pasemi_nand_mtd, 1)) {
+ err = -ENXIO;
+ goto out_lpc;
+ }
+
+ if (mtd_device_register(pasemi_nand_mtd, NULL, 0)) {
+ printk(KERN_ERR "pasemi_nand: Unable to register MTD device\n");
+ err = -ENODEV;
+ goto out_lpc;
+ }
+
+ printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n",
+ res.start, lpcctl);
+
+ return 0;
+
+ out_lpc:
+ release_region(lpcctl, 4);
+ out_ior:
+ iounmap(chip->IO_ADDR_R);
+ out_mtd:
+ kfree(pasemi_nand_mtd);
+ out:
+ return err;
+}
+
+static int pasemi_nand_remove(struct platform_device *ofdev)
+{
+ struct nand_chip *chip;
+
+ if (!pasemi_nand_mtd)
+ return 0;
+
+ chip = pasemi_nand_mtd->priv;
+
+ /* Release resources, unregister device */
+ nand_release(pasemi_nand_mtd);
+
+ release_region(lpcctl, 4);
+
+ iounmap(chip->IO_ADDR_R);
+
+ /* Free the MTD device structure */
+ kfree(pasemi_nand_mtd);
+
+ pasemi_nand_mtd = NULL;
+
+ return 0;
+}
+
+static const struct of_device_id pasemi_nand_match[] =
+{
+ {
+ .compatible = "pasemi,localbus-nand",
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, pasemi_nand_match);
+
+static struct platform_driver pasemi_nand_driver =
+{
+ .driver = {
+ .name = driver_name,
+ .of_match_table = pasemi_nand_match,
+ },
+ .probe = pasemi_nand_probe,
+ .remove = pasemi_nand_remove,
+};
+
+module_platform_driver(pasemi_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Egor Martovetsky <egor@pasemi.com>");
+MODULE_DESCRIPTION("NAND flash interface driver for PA Semi PWRficient");
diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c
new file mode 100644
index 0000000..65b9dbb
--- /dev/null
+++ b/drivers/mtd/nand/plat_nand.c
@@ -0,0 +1,147 @@
+/*
+ * Generic NAND driver
+ *
+ * Author: Vitaly Wool <vitalywool@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+
+struct plat_nand_data {
+ struct nand_chip chip;
+ struct mtd_info mtd;
+ void __iomem *io_base;
+};
+
+/*
+ * Probe for the NAND device.
+ */
+static int plat_nand_probe(struct platform_device *pdev)
+{
+ struct platform_nand_data *pdata = dev_get_platdata(&pdev->dev);
+ struct mtd_part_parser_data ppdata;
+ struct plat_nand_data *data;
+ struct resource *res;
+ const char **part_types;
+ int err = 0;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "platform_nand_data is missing\n");
+ return -EINVAL;
+ }
+
+ if (pdata->chip.nr_chips < 1) {
+ dev_err(&pdev->dev, "invalid number of chips specified\n");
+ return -EINVAL;
+ }
+
+ /* Allocate memory for the device structure (and zero it) */
+ data = devm_kzalloc(&pdev->dev, sizeof(struct plat_nand_data),
+ GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ data->io_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(data->io_base))
+ return PTR_ERR(data->io_base);
+
+ data->chip.priv = &data;
+ data->mtd.priv = &data->chip;
+ data->mtd.dev.parent = &pdev->dev;
+
+ data->chip.IO_ADDR_R = data->io_base;
+ data->chip.IO_ADDR_W = data->io_base;
+ data->chip.cmd_ctrl = pdata->ctrl.cmd_ctrl;
+ data->chip.dev_ready = pdata->ctrl.dev_ready;
+ data->chip.select_chip = pdata->ctrl.select_chip;
+ data->chip.write_buf = pdata->ctrl.write_buf;
+ data->chip.read_buf = pdata->ctrl.read_buf;
+ data->chip.read_byte = pdata->ctrl.read_byte;
+ data->chip.chip_delay = pdata->chip.chip_delay;
+ data->chip.options |= pdata->chip.options;
+ data->chip.bbt_options |= pdata->chip.bbt_options;
+
+ data->chip.ecc.hwctl = pdata->ctrl.hwcontrol;
+ data->chip.ecc.layout = pdata->chip.ecclayout;
+ data->chip.ecc.mode = NAND_ECC_SOFT;
+
+ platform_set_drvdata(pdev, data);
+
+ /* Handle any platform specific setup */
+ if (pdata->ctrl.probe) {
+ err = pdata->ctrl.probe(pdev);
+ if (err)
+ goto out;
+ }
+
+ /* Scan to find existence of the device */
+ if (nand_scan(&data->mtd, pdata->chip.nr_chips)) {
+ err = -ENXIO;
+ goto out;
+ }
+
+ part_types = pdata->chip.part_probe_types;
+
+ ppdata.of_node = pdev->dev.of_node;
+ err = mtd_device_parse_register(&data->mtd, part_types, &ppdata,
+ pdata->chip.partitions,
+ pdata->chip.nr_partitions);
+
+ if (!err)
+ return err;
+
+ nand_release(&data->mtd);
+out:
+ if (pdata->ctrl.remove)
+ pdata->ctrl.remove(pdev);
+ return err;
+}
+
+/*
+ * Remove a NAND device.
+ */
+static int plat_nand_remove(struct platform_device *pdev)
+{
+ struct plat_nand_data *data = platform_get_drvdata(pdev);
+ struct platform_nand_data *pdata = dev_get_platdata(&pdev->dev);
+
+ nand_release(&data->mtd);
+ if (pdata->ctrl.remove)
+ pdata->ctrl.remove(pdev);
+
+ return 0;
+}
+
+static const struct of_device_id plat_nand_match[] = {
+ { .compatible = "gen_nand" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, plat_nand_match);
+
+static struct platform_driver plat_nand_driver = {
+ .probe = plat_nand_probe,
+ .remove = plat_nand_remove,
+ .driver = {
+ .name = "gen_nand",
+ .of_match_table = plat_nand_match,
+ },
+};
+
+module_platform_driver(plat_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Vitaly Wool");
+MODULE_DESCRIPTION("Simple generic NAND driver");
+MODULE_ALIAS("platform:gen_nand");
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
new file mode 100644
index 0000000..e453ae9
--- /dev/null
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -0,0 +1,2012 @@
+/*
+ * drivers/mtd/nand/pxa3xx_nand.c
+ *
+ * Copyright © 2005 Intel Corporation
+ * Copyright © 2006 Marvell International Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * See Documentation/mtd/nand/pxa3xx-nand.txt for more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dma/pxa-dma.h>
+#include <linux/delay.h>
+#include <linux/clk.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/irq.h>
+#include <linux/slab.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
+
+#if defined(CONFIG_ARM) && (defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP))
+#define ARCH_HAS_DMA
+#endif
+
+#include <linux/platform_data/mtd-nand-pxa3xx.h>
+
+#define CHIP_DELAY_TIMEOUT msecs_to_jiffies(200)
+#define NAND_STOP_DELAY msecs_to_jiffies(40)
+#define PAGE_CHUNK_SIZE (2048)
+
+/*
+ * Define a buffer size for the initial command that detects the flash device:
+ * STATUS, READID and PARAM.
+ * ONFI param page is 256 bytes, and there are three redundant copies
+ * to be read. JEDEC param page is 512 bytes, and there are also three
+ * redundant copies to be read.
+ * Hence this buffer should be at least 512 x 3. Let's pick 2048.
+ */
+#define INIT_BUFFER_SIZE 2048
+
+/* registers and bit definitions */
+#define NDCR (0x00) /* Control register */
+#define NDTR0CS0 (0x04) /* Timing Parameter 0 for CS0 */
+#define NDTR1CS0 (0x0C) /* Timing Parameter 1 for CS0 */
+#define NDSR (0x14) /* Status Register */
+#define NDPCR (0x18) /* Page Count Register */
+#define NDBDR0 (0x1C) /* Bad Block Register 0 */
+#define NDBDR1 (0x20) /* Bad Block Register 1 */
+#define NDECCCTRL (0x28) /* ECC control */
+#define NDDB (0x40) /* Data Buffer */
+#define NDCB0 (0x48) /* Command Buffer0 */
+#define NDCB1 (0x4C) /* Command Buffer1 */
+#define NDCB2 (0x50) /* Command Buffer2 */
+
+#define NDCR_SPARE_EN (0x1 << 31)
+#define NDCR_ECC_EN (0x1 << 30)
+#define NDCR_DMA_EN (0x1 << 29)
+#define NDCR_ND_RUN (0x1 << 28)
+#define NDCR_DWIDTH_C (0x1 << 27)
+#define NDCR_DWIDTH_M (0x1 << 26)
+#define NDCR_PAGE_SZ (0x1 << 24)
+#define NDCR_NCSX (0x1 << 23)
+#define NDCR_ND_MODE (0x3 << 21)
+#define NDCR_NAND_MODE (0x0)
+#define NDCR_CLR_PG_CNT (0x1 << 20)
+#define NFCV1_NDCR_ARB_CNTL (0x1 << 19)
+#define NFCV2_NDCR_STOP_ON_UNCOR (0x1 << 19)
+#define NDCR_RD_ID_CNT_MASK (0x7 << 16)
+#define NDCR_RD_ID_CNT(x) (((x) << 16) & NDCR_RD_ID_CNT_MASK)
+
+#define NDCR_RA_START (0x1 << 15)
+#define NDCR_PG_PER_BLK (0x1 << 14)
+#define NDCR_ND_ARB_EN (0x1 << 12)
+#define NDCR_INT_MASK (0xFFF)
+
+#define NDSR_MASK (0xfff)
+#define NDSR_ERR_CNT_OFF (16)
+#define NDSR_ERR_CNT_MASK (0x1f)
+#define NDSR_ERR_CNT(sr) ((sr >> NDSR_ERR_CNT_OFF) & NDSR_ERR_CNT_MASK)
+#define NDSR_RDY (0x1 << 12)
+#define NDSR_FLASH_RDY (0x1 << 11)
+#define NDSR_CS0_PAGED (0x1 << 10)
+#define NDSR_CS1_PAGED (0x1 << 9)
+#define NDSR_CS0_CMDD (0x1 << 8)
+#define NDSR_CS1_CMDD (0x1 << 7)
+#define NDSR_CS0_BBD (0x1 << 6)
+#define NDSR_CS1_BBD (0x1 << 5)
+#define NDSR_UNCORERR (0x1 << 4)
+#define NDSR_CORERR (0x1 << 3)
+#define NDSR_WRDREQ (0x1 << 2)
+#define NDSR_RDDREQ (0x1 << 1)
+#define NDSR_WRCMDREQ (0x1)
+
+#define NDCB0_LEN_OVRD (0x1 << 28)
+#define NDCB0_ST_ROW_EN (0x1 << 26)
+#define NDCB0_AUTO_RS (0x1 << 25)
+#define NDCB0_CSEL (0x1 << 24)
+#define NDCB0_EXT_CMD_TYPE_MASK (0x7 << 29)
+#define NDCB0_EXT_CMD_TYPE(x) (((x) << 29) & NDCB0_EXT_CMD_TYPE_MASK)
+#define NDCB0_CMD_TYPE_MASK (0x7 << 21)
+#define NDCB0_CMD_TYPE(x) (((x) << 21) & NDCB0_CMD_TYPE_MASK)
+#define NDCB0_NC (0x1 << 20)
+#define NDCB0_DBC (0x1 << 19)
+#define NDCB0_ADDR_CYC_MASK (0x7 << 16)
+#define NDCB0_ADDR_CYC(x) (((x) << 16) & NDCB0_ADDR_CYC_MASK)
+#define NDCB0_CMD2_MASK (0xff << 8)
+#define NDCB0_CMD1_MASK (0xff)
+#define NDCB0_ADDR_CYC_SHIFT (16)
+
+#define EXT_CMD_TYPE_DISPATCH 6 /* Command dispatch */
+#define EXT_CMD_TYPE_NAKED_RW 5 /* Naked read or Naked write */
+#define EXT_CMD_TYPE_READ 4 /* Read */
+#define EXT_CMD_TYPE_DISP_WR 4 /* Command dispatch with write */
+#define EXT_CMD_TYPE_FINAL 3 /* Final command */
+#define EXT_CMD_TYPE_LAST_RW 1 /* Last naked read/write */
+#define EXT_CMD_TYPE_MONO 0 /* Monolithic read/write */
+
+/*
+ * This should be large enough to read 'ONFI' and 'JEDEC'.
+ * Let's use 7 bytes, which is the maximum ID count supported
+ * by the controller (see NDCR_RD_ID_CNT_MASK).
+ */
+#define READ_ID_BYTES 7
+
+/* macros for registers read/write */
+#define nand_writel(info, off, val) \
+ writel_relaxed((val), (info)->mmio_base + (off))
+
+#define nand_readl(info, off) \
+ readl_relaxed((info)->mmio_base + (off))
+
+/* error code and state */
+enum {
+ ERR_NONE = 0,
+ ERR_DMABUSERR = -1,
+ ERR_SENDCMD = -2,
+ ERR_UNCORERR = -3,
+ ERR_BBERR = -4,
+ ERR_CORERR = -5,
+};
+
+enum {
+ STATE_IDLE = 0,
+ STATE_PREPARED,
+ STATE_CMD_HANDLE,
+ STATE_DMA_READING,
+ STATE_DMA_WRITING,
+ STATE_DMA_DONE,
+ STATE_PIO_READING,
+ STATE_PIO_WRITING,
+ STATE_CMD_DONE,
+ STATE_READY,
+};
+
+enum pxa3xx_nand_variant {
+ PXA3XX_NAND_VARIANT_PXA,
+ PXA3XX_NAND_VARIANT_ARMADA370,
+};
+
+struct pxa3xx_nand_host {
+ struct nand_chip chip;
+ struct mtd_info *mtd;
+ void *info_data;
+
+ /* page size of attached chip */
+ int use_ecc;
+ int cs;
+
+ /* calculated from pxa3xx_nand_flash data */
+ unsigned int col_addr_cycles;
+ unsigned int row_addr_cycles;
+};
+
+struct pxa3xx_nand_info {
+ struct nand_hw_control controller;
+ struct platform_device *pdev;
+
+ struct clk *clk;
+ void __iomem *mmio_base;
+ unsigned long mmio_phys;
+ struct completion cmd_complete, dev_ready;
+
+ unsigned int buf_start;
+ unsigned int buf_count;
+ unsigned int buf_size;
+ unsigned int data_buff_pos;
+ unsigned int oob_buff_pos;
+
+ /* DMA information */
+ struct scatterlist sg;
+ enum dma_data_direction dma_dir;
+ struct dma_chan *dma_chan;
+ dma_cookie_t dma_cookie;
+ int drcmr_dat;
+ int drcmr_cmd;
+
+ unsigned char *data_buff;
+ unsigned char *oob_buff;
+ dma_addr_t data_buff_phys;
+ int data_dma_ch;
+
+ struct pxa3xx_nand_host *host[NUM_CHIP_SELECT];
+ unsigned int state;
+
+ /*
+ * This driver supports NFCv1 (as found in PXA SoC)
+ * and NFCv2 (as found in Armada 370/XP SoC).
+ */
+ enum pxa3xx_nand_variant variant;
+
+ int cs;
+ int use_ecc; /* use HW ECC ? */
+ int ecc_bch; /* using BCH ECC? */
+ int use_dma; /* use DMA ? */
+ int use_spare; /* use spare ? */
+ int need_wait;
+
+ unsigned int data_size; /* data to be read from FIFO */
+ unsigned int chunk_size; /* split commands chunk size */
+ unsigned int oob_size;
+ unsigned int spare_size;
+ unsigned int ecc_size;
+ unsigned int ecc_err_cnt;
+ unsigned int max_bitflips;
+ int retcode;
+
+ /* cached register value */
+ uint32_t reg_ndcr;
+ uint32_t ndtr0cs0;
+ uint32_t ndtr1cs0;
+
+ /* generated NDCBx register values */
+ uint32_t ndcb0;
+ uint32_t ndcb1;
+ uint32_t ndcb2;
+ uint32_t ndcb3;
+};
+
+static bool use_dma = 1;
+module_param(use_dma, bool, 0444);
+MODULE_PARM_DESC(use_dma, "enable DMA for data transferring to/from NAND HW");
+
+struct pxa3xx_nand_timing {
+ unsigned int tCH; /* Enable signal hold time */
+ unsigned int tCS; /* Enable signal setup time */
+ unsigned int tWH; /* ND_nWE high duration */
+ unsigned int tWP; /* ND_nWE pulse time */
+ unsigned int tRH; /* ND_nRE high duration */
+ unsigned int tRP; /* ND_nRE pulse width */
+ unsigned int tR; /* ND_nWE high to ND_nRE low for read */
+ unsigned int tWHR; /* ND_nWE high to ND_nRE low for status read */
+ unsigned int tAR; /* ND_ALE low to ND_nRE low delay */
+};
+
+struct pxa3xx_nand_flash {
+ uint32_t chip_id;
+ unsigned int flash_width; /* Width of Flash memory (DWIDTH_M) */
+ unsigned int dfc_width; /* Width of flash controller(DWIDTH_C) */
+ struct pxa3xx_nand_timing *timing; /* NAND Flash timing */
+};
+
+static struct pxa3xx_nand_timing timing[] = {
+ { 40, 80, 60, 100, 80, 100, 90000, 400, 40, },
+ { 10, 0, 20, 40, 30, 40, 11123, 110, 10, },
+ { 10, 25, 15, 25, 15, 30, 25000, 60, 10, },
+ { 10, 35, 15, 25, 15, 25, 25000, 60, 10, },
+};
+
+static struct pxa3xx_nand_flash builtin_flash_types[] = {
+ { 0x46ec, 16, 16, &timing[1] },
+ { 0xdaec, 8, 8, &timing[1] },
+ { 0xd7ec, 8, 8, &timing[1] },
+ { 0xa12c, 8, 8, &timing[2] },
+ { 0xb12c, 16, 16, &timing[2] },
+ { 0xdc2c, 8, 8, &timing[2] },
+ { 0xcc2c, 16, 16, &timing[2] },
+ { 0xba20, 16, 16, &timing[3] },
+};
+
+static u8 bbt_pattern[] = {'M', 'V', 'B', 'b', 't', '0' };
+static u8 bbt_mirror_pattern[] = {'1', 't', 'b', 'B', 'V', 'M' };
+
+static struct nand_bbt_descr bbt_main_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 8,
+ .len = 6,
+ .veroffs = 14,
+ .maxblocks = 8, /* Last 8 blocks in each chip */
+ .pattern = bbt_pattern
+};
+
+static struct nand_bbt_descr bbt_mirror_descr = {
+ .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE
+ | NAND_BBT_2BIT | NAND_BBT_VERSION,
+ .offs = 8,
+ .len = 6,
+ .veroffs = 14,
+ .maxblocks = 8, /* Last 8 blocks in each chip */
+ .pattern = bbt_mirror_pattern
+};
+
+static struct nand_ecclayout ecc_layout_2KB_bch4bit = {
+ .eccbytes = 32,
+ .eccpos = {
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = { {2, 30} }
+};
+
+static struct nand_ecclayout ecc_layout_4KB_bch4bit = {
+ .eccbytes = 64,
+ .eccpos = {
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63,
+ 96, 97, 98, 99, 100, 101, 102, 103,
+ 104, 105, 106, 107, 108, 109, 110, 111,
+ 112, 113, 114, 115, 116, 117, 118, 119,
+ 120, 121, 122, 123, 124, 125, 126, 127},
+ /* Bootrom looks in bytes 0 & 5 for bad blocks */
+ .oobfree = { {6, 26}, { 64, 32} }
+};
+
+static struct nand_ecclayout ecc_layout_4KB_bch8bit = {
+ .eccbytes = 128,
+ .eccpos = {
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = { }
+};
+
+#define NDTR0_tCH(c) (min((c), 7) << 19)
+#define NDTR0_tCS(c) (min((c), 7) << 16)
+#define NDTR0_tWH(c) (min((c), 7) << 11)
+#define NDTR0_tWP(c) (min((c), 7) << 8)
+#define NDTR0_tRH(c) (min((c), 7) << 3)
+#define NDTR0_tRP(c) (min((c), 7) << 0)
+
+#define NDTR1_tR(c) (min((c), 65535) << 16)
+#define NDTR1_tWHR(c) (min((c), 15) << 4)
+#define NDTR1_tAR(c) (min((c), 15) << 0)
+
+/* convert nano-seconds to nand flash controller clock cycles */
+#define ns2cycle(ns, clk) (int)((ns) * (clk / 1000000) / 1000)
+
+static const struct of_device_id pxa3xx_nand_dt_ids[] = {
+ {
+ .compatible = "marvell,pxa3xx-nand",
+ .data = (void *)PXA3XX_NAND_VARIANT_PXA,
+ },
+ {
+ .compatible = "marvell,armada370-nand",
+ .data = (void *)PXA3XX_NAND_VARIANT_ARMADA370,
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, pxa3xx_nand_dt_ids);
+
+static enum pxa3xx_nand_variant
+pxa3xx_nand_get_variant(struct platform_device *pdev)
+{
+ const struct of_device_id *of_id =
+ of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
+ if (!of_id)
+ return PXA3XX_NAND_VARIANT_PXA;
+ return (enum pxa3xx_nand_variant)of_id->data;
+}
+
+static void pxa3xx_nand_set_timing(struct pxa3xx_nand_host *host,
+ const struct pxa3xx_nand_timing *t)
+{
+ struct pxa3xx_nand_info *info = host->info_data;
+ unsigned long nand_clk = clk_get_rate(info->clk);
+ uint32_t ndtr0, ndtr1;
+
+ ndtr0 = NDTR0_tCH(ns2cycle(t->tCH, nand_clk)) |
+ NDTR0_tCS(ns2cycle(t->tCS, nand_clk)) |
+ NDTR0_tWH(ns2cycle(t->tWH, nand_clk)) |
+ NDTR0_tWP(ns2cycle(t->tWP, nand_clk)) |
+ NDTR0_tRH(ns2cycle(t->tRH, nand_clk)) |
+ NDTR0_tRP(ns2cycle(t->tRP, nand_clk));
+
+ ndtr1 = NDTR1_tR(ns2cycle(t->tR, nand_clk)) |
+ NDTR1_tWHR(ns2cycle(t->tWHR, nand_clk)) |
+ NDTR1_tAR(ns2cycle(t->tAR, nand_clk));
+
+ info->ndtr0cs0 = ndtr0;
+ info->ndtr1cs0 = ndtr1;
+ nand_writel(info, NDTR0CS0, ndtr0);
+ nand_writel(info, NDTR1CS0, ndtr1);
+}
+
+static void pxa3xx_nand_set_sdr_timing(struct pxa3xx_nand_host *host,
+ const struct nand_sdr_timings *t)
+{
+ struct pxa3xx_nand_info *info = host->info_data;
+ struct nand_chip *chip = &host->chip;
+ unsigned long nand_clk = clk_get_rate(info->clk);
+ uint32_t ndtr0, ndtr1;
+
+ u32 tCH_min = DIV_ROUND_UP(t->tCH_min, 1000);
+ u32 tCS_min = DIV_ROUND_UP(t->tCS_min, 1000);
+ u32 tWH_min = DIV_ROUND_UP(t->tWH_min, 1000);
+ u32 tWP_min = DIV_ROUND_UP(t->tWC_min - t->tWH_min, 1000);
+ u32 tREH_min = DIV_ROUND_UP(t->tREH_min, 1000);
+ u32 tRP_min = DIV_ROUND_UP(t->tRC_min - t->tREH_min, 1000);
+ u32 tR = chip->chip_delay * 1000;
+ u32 tWHR_min = DIV_ROUND_UP(t->tWHR_min, 1000);
+ u32 tAR_min = DIV_ROUND_UP(t->tAR_min, 1000);
+
+ /* fallback to a default value if tR = 0 */
+ if (!tR)
+ tR = 20000;
+
+ ndtr0 = NDTR0_tCH(ns2cycle(tCH_min, nand_clk)) |
+ NDTR0_tCS(ns2cycle(tCS_min, nand_clk)) |
+ NDTR0_tWH(ns2cycle(tWH_min, nand_clk)) |
+ NDTR0_tWP(ns2cycle(tWP_min, nand_clk)) |
+ NDTR0_tRH(ns2cycle(tREH_min, nand_clk)) |
+ NDTR0_tRP(ns2cycle(tRP_min, nand_clk));
+
+ ndtr1 = NDTR1_tR(ns2cycle(tR, nand_clk)) |
+ NDTR1_tWHR(ns2cycle(tWHR_min, nand_clk)) |
+ NDTR1_tAR(ns2cycle(tAR_min, nand_clk));
+
+ info->ndtr0cs0 = ndtr0;
+ info->ndtr1cs0 = ndtr1;
+ nand_writel(info, NDTR0CS0, ndtr0);
+ nand_writel(info, NDTR1CS0, ndtr1);
+}
+
+static int pxa3xx_nand_init_timings_compat(struct pxa3xx_nand_host *host,
+ unsigned int *flash_width,
+ unsigned int *dfc_width)
+{
+ struct nand_chip *chip = &host->chip;
+ struct pxa3xx_nand_info *info = host->info_data;
+ const struct pxa3xx_nand_flash *f = NULL;
+ int i, id, ntypes;
+
+ ntypes = ARRAY_SIZE(builtin_flash_types);
+
+ chip->cmdfunc(host->mtd, NAND_CMD_READID, 0x00, -1);
+
+ id = chip->read_byte(host->mtd);
+ id |= chip->read_byte(host->mtd) << 0x8;
+
+ for (i = 0; i < ntypes; i++) {
+ f = &builtin_flash_types[i];
+
+ if (f->chip_id == id)
+ break;
+ }
+
+ if (i == ntypes) {
+ dev_err(&info->pdev->dev, "Error: timings not found\n");
+ return -EINVAL;
+ }
+
+ pxa3xx_nand_set_timing(host, f->timing);
+
+ *flash_width = f->flash_width;
+ *dfc_width = f->dfc_width;
+
+ return 0;
+}
+
+static int pxa3xx_nand_init_timings_onfi(struct pxa3xx_nand_host *host,
+ int mode)
+{
+ const struct nand_sdr_timings *timings;
+
+ mode = fls(mode) - 1;
+ if (mode < 0)
+ mode = 0;
+
+ timings = onfi_async_timing_mode_to_sdr_timings(mode);
+ if (IS_ERR(timings))
+ return PTR_ERR(timings);
+
+ pxa3xx_nand_set_sdr_timing(host, timings);
+
+ return 0;
+}
+
+static int pxa3xx_nand_init(struct pxa3xx_nand_host *host)
+{
+ struct nand_chip *chip = &host->chip;
+ struct pxa3xx_nand_info *info = host->info_data;
+ unsigned int flash_width = 0, dfc_width = 0;
+ int mode, err;
+
+ mode = onfi_get_async_timing_mode(chip);
+ if (mode == ONFI_TIMING_MODE_UNKNOWN) {
+ err = pxa3xx_nand_init_timings_compat(host, &flash_width,
+ &dfc_width);
+ if (err)
+ return err;
+
+ if (flash_width == 16) {
+ info->reg_ndcr |= NDCR_DWIDTH_M;
+ chip->options |= NAND_BUSWIDTH_16;
+ }
+
+ info->reg_ndcr |= (dfc_width == 16) ? NDCR_DWIDTH_C : 0;
+ } else {
+ err = pxa3xx_nand_init_timings_onfi(host, mode);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+/*
+ * Set the data and OOB size, depending on the selected
+ * spare and ECC configuration.
+ * Only applicable to READ0, READOOB and PAGEPROG commands.
+ */
+static void pxa3xx_set_datasize(struct pxa3xx_nand_info *info,
+ struct mtd_info *mtd)
+{
+ int oob_enable = info->reg_ndcr & NDCR_SPARE_EN;
+
+ info->data_size = mtd->writesize;
+ if (!oob_enable)
+ return;
+
+ info->oob_size = info->spare_size;
+ if (!info->use_ecc)
+ info->oob_size += info->ecc_size;
+}
+
+/**
+ * NOTE: it is a must to set ND_RUN firstly, then write
+ * command buffer, otherwise, it does not work.
+ * We enable all the interrupt at the same time, and
+ * let pxa3xx_nand_irq to handle all logic.
+ */
+static void pxa3xx_nand_start(struct pxa3xx_nand_info *info)
+{
+ uint32_t ndcr;
+
+ ndcr = info->reg_ndcr;
+
+ if (info->use_ecc) {
+ ndcr |= NDCR_ECC_EN;
+ if (info->ecc_bch)
+ nand_writel(info, NDECCCTRL, 0x1);
+ } else {
+ ndcr &= ~NDCR_ECC_EN;
+ if (info->ecc_bch)
+ nand_writel(info, NDECCCTRL, 0x0);
+ }
+
+ if (info->use_dma)
+ ndcr |= NDCR_DMA_EN;
+ else
+ ndcr &= ~NDCR_DMA_EN;
+
+ if (info->use_spare)
+ ndcr |= NDCR_SPARE_EN;
+ else
+ ndcr &= ~NDCR_SPARE_EN;
+
+ ndcr |= NDCR_ND_RUN;
+
+ /* clear status bits and run */
+ nand_writel(info, NDSR, NDSR_MASK);
+ nand_writel(info, NDCR, 0);
+ nand_writel(info, NDCR, ndcr);
+}
+
+static void pxa3xx_nand_stop(struct pxa3xx_nand_info *info)
+{
+ uint32_t ndcr;
+ int timeout = NAND_STOP_DELAY;
+
+ /* wait RUN bit in NDCR become 0 */
+ ndcr = nand_readl(info, NDCR);
+ while ((ndcr & NDCR_ND_RUN) && (timeout-- > 0)) {
+ ndcr = nand_readl(info, NDCR);
+ udelay(1);
+ }
+
+ if (timeout <= 0) {
+ ndcr &= ~NDCR_ND_RUN;
+ nand_writel(info, NDCR, ndcr);
+ }
+ if (info->dma_chan)
+ dmaengine_terminate_all(info->dma_chan);
+
+ /* clear status bits */
+ nand_writel(info, NDSR, NDSR_MASK);
+}
+
+static void __maybe_unused
+enable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
+{
+ uint32_t ndcr;
+
+ ndcr = nand_readl(info, NDCR);
+ nand_writel(info, NDCR, ndcr & ~int_mask);
+}
+
+static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
+{
+ uint32_t ndcr;
+
+ ndcr = nand_readl(info, NDCR);
+ nand_writel(info, NDCR, ndcr | int_mask);
+}
+
+static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len)
+{
+ if (info->ecc_bch) {
+ u32 val;
+ int ret;
+
+ /*
+ * According to the datasheet, when reading from NDDB
+ * with BCH enabled, after each 32 bytes reads, we
+ * have to make sure that the NDSR.RDDREQ bit is set.
+ *
+ * Drain the FIFO 8 32 bits reads at a time, and skip
+ * the polling on the last read.
+ */
+ while (len > 8) {
+ ioread32_rep(info->mmio_base + NDDB, data, 8);
+
+ ret = readl_relaxed_poll_timeout(info->mmio_base + NDSR, val,
+ val & NDSR_RDDREQ, 1000, 5000);
+ if (ret) {
+ dev_err(&info->pdev->dev,
+ "Timeout on RDDREQ while draining the FIFO\n");
+ return;
+ }
+
+ data += 32;
+ len -= 8;
+ }
+ }
+
+ ioread32_rep(info->mmio_base + NDDB, data, len);
+}
+
+static void handle_data_pio(struct pxa3xx_nand_info *info)
+{
+ unsigned int do_bytes = min(info->data_size, info->chunk_size);
+
+ switch (info->state) {
+ case STATE_PIO_WRITING:
+ writesl(info->mmio_base + NDDB,
+ info->data_buff + info->data_buff_pos,
+ DIV_ROUND_UP(do_bytes, 4));
+
+ if (info->oob_size > 0)
+ writesl(info->mmio_base + NDDB,
+ info->oob_buff + info->oob_buff_pos,
+ DIV_ROUND_UP(info->oob_size, 4));
+ break;
+ case STATE_PIO_READING:
+ drain_fifo(info,
+ info->data_buff + info->data_buff_pos,
+ DIV_ROUND_UP(do_bytes, 4));
+
+ if (info->oob_size > 0)
+ drain_fifo(info,
+ info->oob_buff + info->oob_buff_pos,
+ DIV_ROUND_UP(info->oob_size, 4));
+ break;
+ default:
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
+ info->state);
+ BUG();
+ }
+
+ /* Update buffer pointers for multi-page read/write */
+ info->data_buff_pos += do_bytes;
+ info->oob_buff_pos += info->oob_size;
+ info->data_size -= do_bytes;
+}
+
+static void pxa3xx_nand_data_dma_irq(void *data)
+{
+ struct pxa3xx_nand_info *info = data;
+ struct dma_tx_state state;
+ enum dma_status status;
+
+ status = dmaengine_tx_status(info->dma_chan, info->dma_cookie, &state);
+ if (likely(status == DMA_COMPLETE)) {
+ info->state = STATE_DMA_DONE;
+ } else {
+ dev_err(&info->pdev->dev, "DMA error on data channel\n");
+ info->retcode = ERR_DMABUSERR;
+ }
+ dma_unmap_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir);
+
+ nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
+ enable_int(info, NDCR_INT_MASK);
+}
+
+static void start_data_dma(struct pxa3xx_nand_info *info)
+{
+ enum dma_transfer_direction direction;
+ struct dma_async_tx_descriptor *tx;
+
+ switch (info->state) {
+ case STATE_DMA_WRITING:
+ info->dma_dir = DMA_TO_DEVICE;
+ direction = DMA_MEM_TO_DEV;
+ break;
+ case STATE_DMA_READING:
+ info->dma_dir = DMA_FROM_DEVICE;
+ direction = DMA_DEV_TO_MEM;
+ break;
+ default:
+ dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
+ info->state);
+ BUG();
+ }
+ info->sg.length = info->data_size +
+ (info->oob_size ? info->spare_size + info->ecc_size : 0);
+ dma_map_sg(info->dma_chan->device->dev, &info->sg, 1, info->dma_dir);
+
+ tx = dmaengine_prep_slave_sg(info->dma_chan, &info->sg, 1, direction,
+ DMA_PREP_INTERRUPT);
+ if (!tx) {
+ dev_err(&info->pdev->dev, "prep_slave_sg() failed\n");
+ return;
+ }
+ tx->callback = pxa3xx_nand_data_dma_irq;
+ tx->callback_param = info;
+ info->dma_cookie = dmaengine_submit(tx);
+ dma_async_issue_pending(info->dma_chan);
+ dev_dbg(&info->pdev->dev, "%s(dir=%d cookie=%x size=%u)\n",
+ __func__, direction, info->dma_cookie, info->sg.length);
+}
+
+static irqreturn_t pxa3xx_nand_irq_thread(int irq, void *data)
+{
+ struct pxa3xx_nand_info *info = data;
+
+ handle_data_pio(info);
+
+ info->state = STATE_CMD_DONE;
+ nand_writel(info, NDSR, NDSR_WRDREQ | NDSR_RDDREQ);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
+{
+ struct pxa3xx_nand_info *info = devid;
+ unsigned int status, is_completed = 0, is_ready = 0;
+ unsigned int ready, cmd_done;
+ irqreturn_t ret = IRQ_HANDLED;
+
+ if (info->cs == 0) {
+ ready = NDSR_FLASH_RDY;
+ cmd_done = NDSR_CS0_CMDD;
+ } else {
+ ready = NDSR_RDY;
+ cmd_done = NDSR_CS1_CMDD;
+ }
+
+ status = nand_readl(info, NDSR);
+
+ if (status & NDSR_UNCORERR)
+ info->retcode = ERR_UNCORERR;
+ if (status & NDSR_CORERR) {
+ info->retcode = ERR_CORERR;
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370 &&
+ info->ecc_bch)
+ info->ecc_err_cnt = NDSR_ERR_CNT(status);
+ else
+ info->ecc_err_cnt = 1;
+
+ /*
+ * Each chunk composing a page is corrected independently,
+ * and we need to store maximum number of corrected bitflips
+ * to return it to the MTD layer in ecc.read_page().
+ */
+ info->max_bitflips = max_t(unsigned int,
+ info->max_bitflips,
+ info->ecc_err_cnt);
+ }
+ if (status & (NDSR_RDDREQ | NDSR_WRDREQ)) {
+ /* whether use dma to transfer data */
+ if (info->use_dma) {
+ disable_int(info, NDCR_INT_MASK);
+ info->state = (status & NDSR_RDDREQ) ?
+ STATE_DMA_READING : STATE_DMA_WRITING;
+ start_data_dma(info);
+ goto NORMAL_IRQ_EXIT;
+ } else {
+ info->state = (status & NDSR_RDDREQ) ?
+ STATE_PIO_READING : STATE_PIO_WRITING;
+ ret = IRQ_WAKE_THREAD;
+ goto NORMAL_IRQ_EXIT;
+ }
+ }
+ if (status & cmd_done) {
+ info->state = STATE_CMD_DONE;
+ is_completed = 1;
+ }
+ if (status & ready) {
+ info->state = STATE_READY;
+ is_ready = 1;
+ }
+
+ /*
+ * Clear all status bit before issuing the next command, which
+ * can and will alter the status bits and will deserve a new
+ * interrupt on its own. This lets the controller exit the IRQ
+ */
+ nand_writel(info, NDSR, status);
+
+ if (status & NDSR_WRCMDREQ) {
+ status &= ~NDSR_WRCMDREQ;
+ info->state = STATE_CMD_HANDLE;
+
+ /*
+ * Command buffer registers NDCB{0-2} (and optionally NDCB3)
+ * must be loaded by writing directly either 12 or 16
+ * bytes directly to NDCB0, four bytes at a time.
+ *
+ * Direct write access to NDCB1, NDCB2 and NDCB3 is ignored
+ * but each NDCBx register can be read.
+ */
+ nand_writel(info, NDCB0, info->ndcb0);
+ nand_writel(info, NDCB0, info->ndcb1);
+ nand_writel(info, NDCB0, info->ndcb2);
+
+ /* NDCB3 register is available in NFCv2 (Armada 370/XP SoC) */
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+ nand_writel(info, NDCB0, info->ndcb3);
+ }
+
+ if (is_completed)
+ complete(&info->cmd_complete);
+ if (is_ready)
+ complete(&info->dev_ready);
+NORMAL_IRQ_EXIT:
+ return ret;
+}
+
+static inline int is_buf_blank(uint8_t *buf, size_t len)
+{
+ for (; len > 0; len--)
+ if (*buf++ != 0xff)
+ return 0;
+ return 1;
+}
+
+static void set_command_address(struct pxa3xx_nand_info *info,
+ unsigned int page_size, uint16_t column, int page_addr)
+{
+ /* small page addr setting */
+ if (page_size < PAGE_CHUNK_SIZE) {
+ info->ndcb1 = ((page_addr & 0xFFFFFF) << 8)
+ | (column & 0xFF);
+
+ info->ndcb2 = 0;
+ } else {
+ info->ndcb1 = ((page_addr & 0xFFFF) << 16)
+ | (column & 0xFFFF);
+
+ if (page_addr & 0xFF0000)
+ info->ndcb2 = (page_addr & 0xFF0000) >> 16;
+ else
+ info->ndcb2 = 0;
+ }
+}
+
+static void prepare_start_command(struct pxa3xx_nand_info *info, int command)
+{
+ struct pxa3xx_nand_host *host = info->host[info->cs];
+ struct mtd_info *mtd = host->mtd;
+
+ /* reset data and oob column point to handle data */
+ info->buf_start = 0;
+ info->buf_count = 0;
+ info->oob_size = 0;
+ info->data_buff_pos = 0;
+ info->oob_buff_pos = 0;
+ info->use_ecc = 0;
+ info->use_spare = 1;
+ info->retcode = ERR_NONE;
+ info->ecc_err_cnt = 0;
+ info->ndcb3 = 0;
+ info->need_wait = 0;
+
+ switch (command) {
+ case NAND_CMD_READ0:
+ case NAND_CMD_PAGEPROG:
+ info->use_ecc = 1;
+ case NAND_CMD_READOOB:
+ pxa3xx_set_datasize(info, mtd);
+ break;
+ case NAND_CMD_PARAM:
+ info->use_spare = 0;
+ break;
+ default:
+ info->ndcb1 = 0;
+ info->ndcb2 = 0;
+ break;
+ }
+
+ /*
+ * If we are about to issue a read command, or about to set
+ * the write address, then clean the data buffer.
+ */
+ if (command == NAND_CMD_READ0 ||
+ command == NAND_CMD_READOOB ||
+ command == NAND_CMD_SEQIN) {
+
+ info->buf_count = mtd->writesize + mtd->oobsize;
+ memset(info->data_buff, 0xFF, info->buf_count);
+ }
+
+}
+
+static int prepare_set_command(struct pxa3xx_nand_info *info, int command,
+ int ext_cmd_type, uint16_t column, int page_addr)
+{
+ int addr_cycle, exec_cmd;
+ struct pxa3xx_nand_host *host;
+ struct mtd_info *mtd;
+
+ host = info->host[info->cs];
+ mtd = host->mtd;
+ addr_cycle = 0;
+ exec_cmd = 1;
+
+ if (info->cs != 0)
+ info->ndcb0 = NDCB0_CSEL;
+ else
+ info->ndcb0 = 0;
+
+ if (command == NAND_CMD_SEQIN)
+ exec_cmd = 0;
+
+ addr_cycle = NDCB0_ADDR_CYC(host->row_addr_cycles
+ + host->col_addr_cycles);
+
+ switch (command) {
+ case NAND_CMD_READOOB:
+ case NAND_CMD_READ0:
+ info->buf_start = column;
+ info->ndcb0 |= NDCB0_CMD_TYPE(0)
+ | addr_cycle
+ | NAND_CMD_READ0;
+
+ if (command == NAND_CMD_READOOB)
+ info->buf_start += mtd->writesize;
+
+ /*
+ * Multiple page read needs an 'extended command type' field,
+ * which is either naked-read or last-read according to the
+ * state.
+ */
+ if (mtd->writesize == PAGE_CHUNK_SIZE) {
+ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8);
+ } else if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ info->ndcb0 |= NDCB0_DBC | (NAND_CMD_READSTART << 8)
+ | NDCB0_LEN_OVRD
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+ info->ndcb3 = info->chunk_size +
+ info->oob_size;
+ }
+
+ set_command_address(info, mtd->writesize, column, page_addr);
+ break;
+
+ case NAND_CMD_SEQIN:
+
+ info->buf_start = column;
+ set_command_address(info, mtd->writesize, 0, page_addr);
+
+ /*
+ * Multiple page programming needs to execute the initial
+ * SEQIN command that sets the page address.
+ */
+ if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type)
+ | addr_cycle
+ | command;
+ /* No data transfer in this case */
+ info->data_size = 0;
+ exec_cmd = 1;
+ }
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ if (is_buf_blank(info->data_buff,
+ (mtd->writesize + mtd->oobsize))) {
+ exec_cmd = 0;
+ break;
+ }
+
+ /* Second command setting for large pages */
+ if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ /*
+ * Multiple page write uses the 'extended command'
+ * field. This can be used to issue a command dispatch
+ * or a naked-write depending on the current stage.
+ */
+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+ | NDCB0_LEN_OVRD
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type);
+ info->ndcb3 = info->chunk_size +
+ info->oob_size;
+
+ /*
+ * This is the command dispatch that completes a chunked
+ * page program operation.
+ */
+ if (info->data_size == 0) {
+ info->ndcb0 = NDCB0_CMD_TYPE(0x1)
+ | NDCB0_EXT_CMD_TYPE(ext_cmd_type)
+ | command;
+ info->ndcb1 = 0;
+ info->ndcb2 = 0;
+ info->ndcb3 = 0;
+ }
+ } else {
+ info->ndcb0 |= NDCB0_CMD_TYPE(0x1)
+ | NDCB0_AUTO_RS
+ | NDCB0_ST_ROW_EN
+ | NDCB0_DBC
+ | (NAND_CMD_PAGEPROG << 8)
+ | NAND_CMD_SEQIN
+ | addr_cycle;
+ }
+ break;
+
+ case NAND_CMD_PARAM:
+ info->buf_count = INIT_BUFFER_SIZE;
+ info->ndcb0 |= NDCB0_CMD_TYPE(0)
+ | NDCB0_ADDR_CYC(1)
+ | NDCB0_LEN_OVRD
+ | command;
+ info->ndcb1 = (column & 0xFF);
+ info->ndcb3 = INIT_BUFFER_SIZE;
+ info->data_size = INIT_BUFFER_SIZE;
+ break;
+
+ case NAND_CMD_READID:
+ info->buf_count = READ_ID_BYTES;
+ info->ndcb0 |= NDCB0_CMD_TYPE(3)
+ | NDCB0_ADDR_CYC(1)
+ | command;
+ info->ndcb1 = (column & 0xFF);
+
+ info->data_size = 8;
+ break;
+ case NAND_CMD_STATUS:
+ info->buf_count = 1;
+ info->ndcb0 |= NDCB0_CMD_TYPE(4)
+ | NDCB0_ADDR_CYC(1)
+ | command;
+
+ info->data_size = 8;
+ break;
+
+ case NAND_CMD_ERASE1:
+ info->ndcb0 |= NDCB0_CMD_TYPE(2)
+ | NDCB0_AUTO_RS
+ | NDCB0_ADDR_CYC(3)
+ | NDCB0_DBC
+ | (NAND_CMD_ERASE2 << 8)
+ | NAND_CMD_ERASE1;
+ info->ndcb1 = page_addr;
+ info->ndcb2 = 0;
+
+ break;
+ case NAND_CMD_RESET:
+ info->ndcb0 |= NDCB0_CMD_TYPE(5)
+ | command;
+
+ break;
+
+ case NAND_CMD_ERASE2:
+ exec_cmd = 0;
+ break;
+
+ default:
+ exec_cmd = 0;
+ dev_err(&info->pdev->dev, "non-supported command %x\n",
+ command);
+ break;
+ }
+
+ return exec_cmd;
+}
+
+static void nand_cmdfunc(struct mtd_info *mtd, unsigned command,
+ int column, int page_addr)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ int exec_cmd;
+
+ /*
+ * if this is a x16 device ,then convert the input
+ * "byte" address into a "word" address appropriate
+ * for indexing a word-oriented device
+ */
+ if (info->reg_ndcr & NDCR_DWIDTH_M)
+ column /= 2;
+
+ /*
+ * There may be different NAND chip hooked to
+ * different chip select, so check whether
+ * chip select has been changed, if yes, reset the timing
+ */
+ if (info->cs != host->cs) {
+ info->cs = host->cs;
+ nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+ nand_writel(info, NDTR1CS0, info->ndtr1cs0);
+ }
+
+ prepare_start_command(info, command);
+
+ info->state = STATE_PREPARED;
+ exec_cmd = prepare_set_command(info, command, 0, column, page_addr);
+
+ if (exec_cmd) {
+ init_completion(&info->cmd_complete);
+ init_completion(&info->dev_ready);
+ info->need_wait = 1;
+ pxa3xx_nand_start(info);
+
+ if (!wait_for_completion_timeout(&info->cmd_complete,
+ CHIP_DELAY_TIMEOUT)) {
+ dev_err(&info->pdev->dev, "Wait time out!!!\n");
+ /* Stop State Machine for next command cycle */
+ pxa3xx_nand_stop(info);
+ }
+ }
+ info->state = STATE_IDLE;
+}
+
+static void nand_cmdfunc_extended(struct mtd_info *mtd,
+ const unsigned command,
+ int column, int page_addr)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ int exec_cmd, ext_cmd_type;
+
+ /*
+ * if this is a x16 device then convert the input
+ * "byte" address into a "word" address appropriate
+ * for indexing a word-oriented device
+ */
+ if (info->reg_ndcr & NDCR_DWIDTH_M)
+ column /= 2;
+
+ /*
+ * There may be different NAND chip hooked to
+ * different chip select, so check whether
+ * chip select has been changed, if yes, reset the timing
+ */
+ if (info->cs != host->cs) {
+ info->cs = host->cs;
+ nand_writel(info, NDTR0CS0, info->ndtr0cs0);
+ nand_writel(info, NDTR1CS0, info->ndtr1cs0);
+ }
+
+ /* Select the extended command for the first command */
+ switch (command) {
+ case NAND_CMD_READ0:
+ case NAND_CMD_READOOB:
+ ext_cmd_type = EXT_CMD_TYPE_MONO;
+ break;
+ case NAND_CMD_SEQIN:
+ ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
+ break;
+ case NAND_CMD_PAGEPROG:
+ ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
+ break;
+ default:
+ ext_cmd_type = 0;
+ break;
+ }
+
+ prepare_start_command(info, command);
+
+ /*
+ * Prepare the "is ready" completion before starting a command
+ * transaction sequence. If the command is not executed the
+ * completion will be completed, see below.
+ *
+ * We can do that inside the loop because the command variable
+ * is invariant and thus so is the exec_cmd.
+ */
+ info->need_wait = 1;
+ init_completion(&info->dev_ready);
+ do {
+ info->state = STATE_PREPARED;
+ exec_cmd = prepare_set_command(info, command, ext_cmd_type,
+ column, page_addr);
+ if (!exec_cmd) {
+ info->need_wait = 0;
+ complete(&info->dev_ready);
+ break;
+ }
+
+ init_completion(&info->cmd_complete);
+ pxa3xx_nand_start(info);
+
+ if (!wait_for_completion_timeout(&info->cmd_complete,
+ CHIP_DELAY_TIMEOUT)) {
+ dev_err(&info->pdev->dev, "Wait time out!!!\n");
+ /* Stop State Machine for next command cycle */
+ pxa3xx_nand_stop(info);
+ break;
+ }
+
+ /* Check if the sequence is complete */
+ if (info->data_size == 0 && command != NAND_CMD_PAGEPROG)
+ break;
+
+ /*
+ * After a splitted program command sequence has issued
+ * the command dispatch, the command sequence is complete.
+ */
+ if (info->data_size == 0 &&
+ command == NAND_CMD_PAGEPROG &&
+ ext_cmd_type == EXT_CMD_TYPE_DISPATCH)
+ break;
+
+ if (command == NAND_CMD_READ0 || command == NAND_CMD_READOOB) {
+ /* Last read: issue a 'last naked read' */
+ if (info->data_size == info->chunk_size)
+ ext_cmd_type = EXT_CMD_TYPE_LAST_RW;
+ else
+ ext_cmd_type = EXT_CMD_TYPE_NAKED_RW;
+
+ /*
+ * If a splitted program command has no more data to transfer,
+ * the command dispatch must be issued to complete.
+ */
+ } else if (command == NAND_CMD_PAGEPROG &&
+ info->data_size == 0) {
+ ext_cmd_type = EXT_CMD_TYPE_DISPATCH;
+ }
+ } while (1);
+
+ info->state = STATE_IDLE;
+}
+
+static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, const uint8_t *buf, int oob_required,
+ int page)
+{
+ chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ return 0;
+}
+
+static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf, int oob_required,
+ int page)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+
+ chip->read_buf(mtd, buf, mtd->writesize);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ if (info->retcode == ERR_CORERR && info->use_ecc) {
+ mtd->ecc_stats.corrected += info->ecc_err_cnt;
+
+ } else if (info->retcode == ERR_UNCORERR) {
+ /*
+ * for blank page (all 0xff), HW will calculate its ECC as
+ * 0, which is different from the ECC information within
+ * OOB, ignore such uncorrectable errors
+ */
+ if (is_buf_blank(buf, mtd->writesize))
+ info->retcode = ERR_NONE;
+ else
+ mtd->ecc_stats.failed++;
+ }
+
+ return info->max_bitflips;
+}
+
+static uint8_t pxa3xx_nand_read_byte(struct mtd_info *mtd)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ char retval = 0xFF;
+
+ if (info->buf_start < info->buf_count)
+ /* Has just send a new command? */
+ retval = info->data_buff[info->buf_start++];
+
+ return retval;
+}
+
+static u16 pxa3xx_nand_read_word(struct mtd_info *mtd)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ u16 retval = 0xFFFF;
+
+ if (!(info->buf_start & 0x01) && info->buf_start < info->buf_count) {
+ retval = *((u16 *)(info->data_buff+info->buf_start));
+ info->buf_start += 2;
+ }
+ return retval;
+}
+
+static void pxa3xx_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
+
+ memcpy(buf, info->data_buff + info->buf_start, real_len);
+ info->buf_start += real_len;
+}
+
+static void pxa3xx_nand_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ int real_len = min_t(size_t, len, info->buf_count - info->buf_start);
+
+ memcpy(info->data_buff + info->buf_start, buf, real_len);
+ info->buf_start += real_len;
+}
+
+static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ return;
+}
+
+static int pxa3xx_nand_waitfunc(struct mtd_info *mtd, struct nand_chip *this)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+
+ if (info->need_wait) {
+ info->need_wait = 0;
+ if (!wait_for_completion_timeout(&info->dev_ready,
+ CHIP_DELAY_TIMEOUT)) {
+ dev_err(&info->pdev->dev, "Ready time out!!!\n");
+ return NAND_STATUS_FAIL;
+ }
+ }
+
+ /* pxa3xx_nand_send_command has waited for command complete */
+ if (this->state == FL_WRITING || this->state == FL_ERASING) {
+ if (info->retcode == ERR_NONE)
+ return 0;
+ else
+ return NAND_STATUS_FAIL;
+ }
+
+ return NAND_STATUS_READY;
+}
+
+static int pxa3xx_nand_config_flash(struct pxa3xx_nand_info *info)
+{
+ struct platform_device *pdev = info->pdev;
+ struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct pxa3xx_nand_host *host = info->host[info->cs];
+ struct mtd_info *mtd = host->mtd;
+ struct nand_chip *chip = mtd->priv;
+
+ /* configure default flash values */
+ info->reg_ndcr = 0x0; /* enable all interrupts */
+ info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
+ info->reg_ndcr |= NDCR_RD_ID_CNT(READ_ID_BYTES);
+ info->reg_ndcr |= NDCR_SPARE_EN; /* enable spare by default */
+ info->reg_ndcr |= (host->col_addr_cycles == 2) ? NDCR_RA_START : 0;
+ info->reg_ndcr |= (chip->page_shift == 6) ? NDCR_PG_PER_BLK : 0;
+ info->reg_ndcr |= (mtd->writesize == 2048) ? NDCR_PAGE_SZ : 0;
+
+ return 0;
+}
+
+static int pxa3xx_nand_detect_config(struct pxa3xx_nand_info *info)
+{
+ uint32_t ndcr = nand_readl(info, NDCR);
+
+ /* Set an initial chunk size */
+ info->chunk_size = ndcr & NDCR_PAGE_SZ ? 2048 : 512;
+ info->reg_ndcr = ndcr &
+ ~(NDCR_INT_MASK | NDCR_ND_ARB_EN | NFCV1_NDCR_ARB_CNTL);
+ info->ndtr0cs0 = nand_readl(info, NDTR0CS0);
+ info->ndtr1cs0 = nand_readl(info, NDTR1CS0);
+ return 0;
+}
+
+static int pxa3xx_nand_init_buff(struct pxa3xx_nand_info *info)
+{
+ struct platform_device *pdev = info->pdev;
+ struct dma_slave_config config;
+ dma_cap_mask_t mask;
+ struct pxad_param param;
+ int ret;
+
+ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+ if (info->data_buff == NULL)
+ return -ENOMEM;
+ if (use_dma == 0)
+ return 0;
+
+ ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
+ if (ret)
+ return ret;
+
+ sg_init_one(&info->sg, info->data_buff, info->buf_size);
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+ param.prio = PXAD_PRIO_LOWEST;
+ param.drcmr = info->drcmr_dat;
+ info->dma_chan = dma_request_slave_channel_compat(mask, pxad_filter_fn,
+ ¶m, &pdev->dev,
+ "data");
+ if (!info->dma_chan) {
+ dev_err(&pdev->dev, "unable to request data dma channel\n");
+ return -ENODEV;
+ }
+
+ memset(&config, 0, sizeof(config));
+ config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ config.src_addr = info->mmio_phys + NDDB;
+ config.dst_addr = info->mmio_phys + NDDB;
+ config.src_maxburst = 32;
+ config.dst_maxburst = 32;
+ ret = dmaengine_slave_config(info->dma_chan, &config);
+ if (ret < 0) {
+ dev_err(&info->pdev->dev,
+ "dma channel configuration failed: %d\n",
+ ret);
+ return ret;
+ }
+
+ /*
+ * Now that DMA buffers are allocated we turn on
+ * DMA proper for I/O operations.
+ */
+ info->use_dma = 1;
+ return 0;
+}
+
+static void pxa3xx_nand_free_buff(struct pxa3xx_nand_info *info)
+{
+ if (info->use_dma) {
+ dmaengine_terminate_all(info->dma_chan);
+ dma_release_channel(info->dma_chan);
+ }
+ kfree(info->data_buff);
+}
+
+static int pxa3xx_nand_sensing(struct pxa3xx_nand_host *host)
+{
+ struct pxa3xx_nand_info *info = host->info_data;
+ struct mtd_info *mtd;
+ struct nand_chip *chip;
+ const struct nand_sdr_timings *timings;
+ int ret;
+
+ mtd = info->host[info->cs]->mtd;
+ chip = mtd->priv;
+
+ /* use the common timing to make a try */
+ timings = onfi_async_timing_mode_to_sdr_timings(0);
+ if (IS_ERR(timings))
+ return PTR_ERR(timings);
+
+ pxa3xx_nand_set_sdr_timing(host, timings);
+
+ chip->cmdfunc(mtd, NAND_CMD_RESET, 0, 0);
+ ret = chip->waitfunc(mtd, chip);
+ if (ret & NAND_STATUS_FAIL)
+ return -ENODEV;
+
+ return 0;
+}
+
+static int pxa_ecc_init(struct pxa3xx_nand_info *info,
+ struct nand_ecc_ctrl *ecc,
+ int strength, int ecc_stepsize, int page_size)
+{
+ if (strength == 1 && ecc_stepsize == 512 && page_size == 2048) {
+ info->chunk_size = 2048;
+ info->spare_size = 40;
+ info->ecc_size = 24;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = 512;
+ ecc->strength = 1;
+
+ } else if (strength == 1 && ecc_stepsize == 512 && page_size == 512) {
+ info->chunk_size = 512;
+ info->spare_size = 8;
+ info->ecc_size = 8;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = 512;
+ ecc->strength = 1;
+
+ /*
+ * Required ECC: 4-bit correction per 512 bytes
+ * Select: 16-bit correction per 2048 bytes
+ */
+ } else if (strength == 4 && ecc_stepsize == 512 && page_size == 2048) {
+ info->ecc_bch = 1;
+ info->chunk_size = 2048;
+ info->spare_size = 32;
+ info->ecc_size = 32;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_2KB_bch4bit;
+ ecc->strength = 16;
+
+ } else if (strength == 4 && ecc_stepsize == 512 && page_size == 4096) {
+ info->ecc_bch = 1;
+ info->chunk_size = 2048;
+ info->spare_size = 32;
+ info->ecc_size = 32;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_4KB_bch4bit;
+ ecc->strength = 16;
+
+ /*
+ * Required ECC: 8-bit correction per 512 bytes
+ * Select: 16-bit correction per 1024 bytes
+ */
+ } else if (strength == 8 && ecc_stepsize == 512 && page_size == 4096) {
+ info->ecc_bch = 1;
+ info->chunk_size = 1024;
+ info->spare_size = 0;
+ info->ecc_size = 32;
+ ecc->mode = NAND_ECC_HW;
+ ecc->size = info->chunk_size;
+ ecc->layout = &ecc_layout_4KB_bch8bit;
+ ecc->strength = 16;
+ } else {
+ dev_err(&info->pdev->dev,
+ "ECC strength %d at page size %d is not supported\n",
+ strength, page_size);
+ return -ENODEV;
+ }
+
+ dev_info(&info->pdev->dev, "ECC strength %d, ECC step size %d\n",
+ ecc->strength, ecc->size);
+ return 0;
+}
+
+static int pxa3xx_nand_scan(struct mtd_info *mtd)
+{
+ struct pxa3xx_nand_host *host = mtd->priv;
+ struct pxa3xx_nand_info *info = host->info_data;
+ struct platform_device *pdev = info->pdev;
+ struct pxa3xx_nand_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+ uint16_t ecc_strength, ecc_step;
+
+ if (pdata->keep_config && !pxa3xx_nand_detect_config(info))
+ goto KEEP_CONFIG;
+
+ /* Set a default chunk size */
+ info->chunk_size = 512;
+
+ ret = pxa3xx_nand_config_flash(info);
+ if (ret)
+ return ret;
+
+ ret = pxa3xx_nand_sensing(host);
+ if (ret) {
+ dev_info(&info->pdev->dev, "There is no chip on cs %d!\n",
+ info->cs);
+
+ return ret;
+ }
+
+KEEP_CONFIG:
+ info->reg_ndcr |= (pdata->enable_arbiter) ? NDCR_ND_ARB_EN : 0;
+ if (info->reg_ndcr & NDCR_DWIDTH_M)
+ chip->options |= NAND_BUSWIDTH_16;
+
+ /* Device detection must be done with ECC disabled */
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370)
+ nand_writel(info, NDECCCTRL, 0x0);
+
+ if (nand_scan_ident(mtd, 1, NULL))
+ return -ENODEV;
+
+ if (!pdata->keep_config) {
+ ret = pxa3xx_nand_init(host);
+ if (ret) {
+ dev_err(&info->pdev->dev, "Failed to init nand: %d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ if (pdata->flash_bbt) {
+ /*
+ * We'll use a bad block table stored in-flash and don't
+ * allow writing the bad block marker to the flash.
+ */
+ chip->bbt_options |= NAND_BBT_USE_FLASH |
+ NAND_BBT_NO_OOB_BBM;
+ chip->bbt_td = &bbt_main_descr;
+ chip->bbt_md = &bbt_mirror_descr;
+ }
+
+ /*
+ * If the page size is bigger than the FIFO size, let's check
+ * we are given the right variant and then switch to the extended
+ * (aka splitted) command handling,
+ */
+ if (mtd->writesize > PAGE_CHUNK_SIZE) {
+ if (info->variant == PXA3XX_NAND_VARIANT_ARMADA370) {
+ chip->cmdfunc = nand_cmdfunc_extended;
+ } else {
+ dev_err(&info->pdev->dev,
+ "unsupported page size on this variant\n");
+ return -ENODEV;
+ }
+ }
+
+ if (pdata->ecc_strength && pdata->ecc_step_size) {
+ ecc_strength = pdata->ecc_strength;
+ ecc_step = pdata->ecc_step_size;
+ } else {
+ ecc_strength = chip->ecc_strength_ds;
+ ecc_step = chip->ecc_step_ds;
+ }
+
+ /* Set default ECC strength requirements on non-ONFI devices */
+ if (ecc_strength < 1 && ecc_step < 1) {
+ ecc_strength = 1;
+ ecc_step = 512;
+ }
+
+ ret = pxa_ecc_init(info, &chip->ecc, ecc_strength,
+ ecc_step, mtd->writesize);
+ if (ret)
+ return ret;
+
+ /* calculate addressing information */
+ if (mtd->writesize >= 2048)
+ host->col_addr_cycles = 2;
+ else
+ host->col_addr_cycles = 1;
+
+ /* release the initial buffer */
+ kfree(info->data_buff);
+
+ /* allocate the real data + oob buffer */
+ info->buf_size = mtd->writesize + mtd->oobsize;
+ ret = pxa3xx_nand_init_buff(info);
+ if (ret)
+ return ret;
+ info->oob_buff = info->data_buff + mtd->writesize;
+
+ if ((mtd->size >> chip->page_shift) > 65536)
+ host->row_addr_cycles = 3;
+ else
+ host->row_addr_cycles = 2;
+ return nand_scan_tail(mtd);
+}
+
+static int alloc_nand_resource(struct platform_device *pdev)
+{
+ struct pxa3xx_nand_platform_data *pdata;
+ struct pxa3xx_nand_info *info;
+ struct pxa3xx_nand_host *host;
+ struct nand_chip *chip = NULL;
+ struct mtd_info *mtd;
+ struct resource *r;
+ int ret, irq, cs;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (pdata->num_cs <= 0)
+ return -ENODEV;
+ info = devm_kzalloc(&pdev->dev, sizeof(*info) + (sizeof(*mtd) +
+ sizeof(*host)) * pdata->num_cs, GFP_KERNEL);
+ if (!info)
+ return -ENOMEM;
+
+ info->pdev = pdev;
+ info->variant = pxa3xx_nand_get_variant(pdev);
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ mtd = (void *)&info[1] + (sizeof(*mtd) + sizeof(*host)) * cs;
+ chip = (struct nand_chip *)(&mtd[1]);
+ host = (struct pxa3xx_nand_host *)chip;
+ info->host[cs] = host;
+ host->mtd = mtd;
+ host->cs = cs;
+ host->info_data = info;
+ mtd->priv = host;
+ mtd->dev.parent = &pdev->dev;
+
+ chip->ecc.read_page = pxa3xx_nand_read_page_hwecc;
+ chip->ecc.write_page = pxa3xx_nand_write_page_hwecc;
+ chip->controller = &info->controller;
+ chip->waitfunc = pxa3xx_nand_waitfunc;
+ chip->select_chip = pxa3xx_nand_select_chip;
+ chip->read_word = pxa3xx_nand_read_word;
+ chip->read_byte = pxa3xx_nand_read_byte;
+ chip->read_buf = pxa3xx_nand_read_buf;
+ chip->write_buf = pxa3xx_nand_write_buf;
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+ chip->cmdfunc = nand_cmdfunc;
+ }
+
+ spin_lock_init(&chip->controller->lock);
+ init_waitqueue_head(&chip->controller->wq);
+ info->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "failed to get nand clock\n");
+ return PTR_ERR(info->clk);
+ }
+ ret = clk_prepare_enable(info->clk);
+ if (ret < 0)
+ return ret;
+
+ if (use_dma) {
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 0);
+ if (r == NULL) {
+ dev_err(&pdev->dev,
+ "no resource defined for data DMA\n");
+ ret = -ENXIO;
+ goto fail_disable_clk;
+ }
+ info->drcmr_dat = r->start;
+
+ r = platform_get_resource(pdev, IORESOURCE_DMA, 1);
+ if (r == NULL) {
+ dev_err(&pdev->dev,
+ "no resource defined for cmd DMA\n");
+ ret = -ENXIO;
+ goto fail_disable_clk;
+ }
+ info->drcmr_cmd = r->start;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no IRQ resource defined\n");
+ ret = -ENXIO;
+ goto fail_disable_clk;
+ }
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->mmio_base = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(info->mmio_base)) {
+ ret = PTR_ERR(info->mmio_base);
+ goto fail_disable_clk;
+ }
+ info->mmio_phys = r->start;
+
+ /* Allocate a buffer to allow flash detection */
+ info->buf_size = INIT_BUFFER_SIZE;
+ info->data_buff = kmalloc(info->buf_size, GFP_KERNEL);
+ if (info->data_buff == NULL) {
+ ret = -ENOMEM;
+ goto fail_disable_clk;
+ }
+
+ /* initialize all interrupts to be disabled */
+ disable_int(info, NDSR_MASK);
+
+ ret = request_threaded_irq(irq, pxa3xx_nand_irq,
+ pxa3xx_nand_irq_thread, IRQF_ONESHOT,
+ pdev->name, info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "failed to request IRQ\n");
+ goto fail_free_buf;
+ }
+
+ platform_set_drvdata(pdev, info);
+
+ return 0;
+
+fail_free_buf:
+ free_irq(irq, info);
+ kfree(info->data_buff);
+fail_disable_clk:
+ clk_disable_unprepare(info->clk);
+ return ret;
+}
+
+static int pxa3xx_nand_remove(struct platform_device *pdev)
+{
+ struct pxa3xx_nand_info *info = platform_get_drvdata(pdev);
+ struct pxa3xx_nand_platform_data *pdata;
+ int irq, cs;
+
+ if (!info)
+ return 0;
+
+ pdata = dev_get_platdata(&pdev->dev);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq >= 0)
+ free_irq(irq, info);
+ pxa3xx_nand_free_buff(info);
+
+ /*
+ * In the pxa3xx case, the DFI bus is shared between the SMC and NFC.
+ * In order to prevent a lockup of the system bus, the DFI bus
+ * arbitration is granted to SMC upon driver removal. This is done by
+ * setting the x_ARB_CNTL bit, which also prevents the NAND to have
+ * access to the bus anymore.
+ */
+ nand_writel(info, NDCR,
+ (nand_readl(info, NDCR) & ~NDCR_ND_ARB_EN) |
+ NFCV1_NDCR_ARB_CNTL);
+ clk_disable_unprepare(info->clk);
+
+ for (cs = 0; cs < pdata->num_cs; cs++)
+ nand_release(info->host[cs]->mtd);
+ return 0;
+}
+
+static int pxa3xx_nand_probe_dt(struct platform_device *pdev)
+{
+ struct pxa3xx_nand_platform_data *pdata;
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *of_id =
+ of_match_device(pxa3xx_nand_dt_ids, &pdev->dev);
+
+ if (!of_id)
+ return 0;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ if (of_get_property(np, "marvell,nand-enable-arbiter", NULL))
+ pdata->enable_arbiter = 1;
+ if (of_get_property(np, "marvell,nand-keep-config", NULL))
+ pdata->keep_config = 1;
+ of_property_read_u32(np, "num-cs", &pdata->num_cs);
+ pdata->flash_bbt = of_get_nand_on_flash_bbt(np);
+
+ pdata->ecc_strength = of_get_nand_ecc_strength(np);
+ if (pdata->ecc_strength < 0)
+ pdata->ecc_strength = 0;
+
+ pdata->ecc_step_size = of_get_nand_ecc_step_size(np);
+ if (pdata->ecc_step_size < 0)
+ pdata->ecc_step_size = 0;
+
+ pdev->dev.platform_data = pdata;
+
+ return 0;
+}
+
+static int pxa3xx_nand_probe(struct platform_device *pdev)
+{
+ struct pxa3xx_nand_platform_data *pdata;
+ struct mtd_part_parser_data ppdata = {};
+ struct pxa3xx_nand_info *info;
+ int ret, cs, probe_success, dma_available;
+
+ dma_available = IS_ENABLED(CONFIG_ARM) &&
+ (IS_ENABLED(CONFIG_ARCH_PXA) || IS_ENABLED(CONFIG_ARCH_MMP));
+ if (use_dma && !dma_available) {
+ use_dma = 0;
+ dev_warn(&pdev->dev,
+ "This platform can't do DMA on this device\n");
+ }
+
+ ret = pxa3xx_nand_probe_dt(pdev);
+ if (ret)
+ return ret;
+
+ pdata = dev_get_platdata(&pdev->dev);
+ if (!pdata) {
+ dev_err(&pdev->dev, "no platform data defined\n");
+ return -ENODEV;
+ }
+
+ ret = alloc_nand_resource(pdev);
+ if (ret) {
+ dev_err(&pdev->dev, "alloc nand resource failed\n");
+ return ret;
+ }
+
+ info = platform_get_drvdata(pdev);
+ probe_success = 0;
+ for (cs = 0; cs < pdata->num_cs; cs++) {
+ struct mtd_info *mtd = info->host[cs]->mtd;
+
+ /*
+ * The mtd name matches the one used in 'mtdparts' kernel
+ * parameter. This name cannot be changed or otherwise
+ * user's mtd partitions configuration would get broken.
+ */
+ mtd->name = "pxa3xx_nand-0";
+ info->cs = cs;
+ ret = pxa3xx_nand_scan(mtd);
+ if (ret) {
+ dev_warn(&pdev->dev, "failed to scan nand at cs %d\n",
+ cs);
+ continue;
+ }
+
+ ppdata.of_node = pdev->dev.of_node;
+ ret = mtd_device_parse_register(mtd, NULL,
+ &ppdata, pdata->parts[cs],
+ pdata->nr_parts[cs]);
+ if (!ret)
+ probe_success = 1;
+ }
+
+ if (!probe_success) {
+ pxa3xx_nand_remove(pdev);
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int pxa3xx_nand_suspend(struct device *dev)
+{
+ struct pxa3xx_nand_info *info = dev_get_drvdata(dev);
+
+ if (info->state) {
+ dev_err(dev, "driver busy, state = %d\n", info->state);
+ return -EAGAIN;
+ }
+
+ return 0;
+}
+
+static int pxa3xx_nand_resume(struct device *dev)
+{
+ struct pxa3xx_nand_info *info = dev_get_drvdata(dev);
+
+ /* We don't want to handle interrupt without calling mtd routine */
+ disable_int(info, NDCR_INT_MASK);
+
+ /*
+ * Directly set the chip select to a invalid value,
+ * then the driver would reset the timing according
+ * to current chip select at the beginning of cmdfunc
+ */
+ info->cs = 0xff;
+
+ /*
+ * As the spec says, the NDSR would be updated to 0x1800 when
+ * doing the nand_clk disable/enable.
+ * To prevent it damaging state machine of the driver, clear
+ * all status before resume
+ */
+ nand_writel(info, NDSR, NDSR_MASK);
+
+ return 0;
+}
+#else
+#define pxa3xx_nand_suspend NULL
+#define pxa3xx_nand_resume NULL
+#endif
+
+static const struct dev_pm_ops pxa3xx_nand_pm_ops = {
+ .suspend = pxa3xx_nand_suspend,
+ .resume = pxa3xx_nand_resume,
+};
+
+static struct platform_driver pxa3xx_nand_driver = {
+ .driver = {
+ .name = "pxa3xx-nand",
+ .of_match_table = pxa3xx_nand_dt_ids,
+ .pm = &pxa3xx_nand_pm_ops,
+ },
+ .probe = pxa3xx_nand_probe,
+ .remove = pxa3xx_nand_remove,
+};
+
+module_platform_driver(pxa3xx_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("PXA3xx NAND controller driver");
diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c
new file mode 100644
index 0000000..d8bb2be
--- /dev/null
+++ b/drivers/mtd/nand/r852.c
@@ -0,0 +1,1088 @@
+/*
+ * Copyright © 2009 - Maxim Levitsky
+ * driver for Ricoh xD readers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/jiffies.h>
+#include <linux/workqueue.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/pci_ids.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <asm/byteorder.h>
+#include <linux/sched.h>
+#include "sm_common.h"
+#include "r852.h"
+
+
+static bool r852_enable_dma = 1;
+module_param(r852_enable_dma, bool, S_IRUGO);
+MODULE_PARM_DESC(r852_enable_dma, "Enable usage of the DMA (default)");
+
+static int debug;
+module_param(debug, int, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Debug level (0-2)");
+
+/* read register */
+static inline uint8_t r852_read_reg(struct r852_device *dev, int address)
+{
+ uint8_t reg = readb(dev->mmio + address);
+ return reg;
+}
+
+/* write register */
+static inline void r852_write_reg(struct r852_device *dev,
+ int address, uint8_t value)
+{
+ writeb(value, dev->mmio + address);
+ mmiowb();
+}
+
+
+/* read dword sized register */
+static inline uint32_t r852_read_reg_dword(struct r852_device *dev, int address)
+{
+ uint32_t reg = le32_to_cpu(readl(dev->mmio + address));
+ return reg;
+}
+
+/* write dword sized register */
+static inline void r852_write_reg_dword(struct r852_device *dev,
+ int address, uint32_t value)
+{
+ writel(cpu_to_le32(value), dev->mmio + address);
+ mmiowb();
+}
+
+/* returns pointer to our private structure */
+static inline struct r852_device *r852_get_dev(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ return chip->priv;
+}
+
+
+/* check if controller supports dma */
+static void r852_dma_test(struct r852_device *dev)
+{
+ dev->dma_usable = (r852_read_reg(dev, R852_DMA_CAP) &
+ (R852_DMA1 | R852_DMA2)) == (R852_DMA1 | R852_DMA2);
+
+ if (!dev->dma_usable)
+ message("Non dma capable device detected, dma disabled");
+
+ if (!r852_enable_dma) {
+ message("disabling dma on user request");
+ dev->dma_usable = 0;
+ }
+}
+
+/*
+ * Enable dma. Enables ether first or second stage of the DMA,
+ * Expects dev->dma_dir and dev->dma_state be set
+ */
+static void r852_dma_enable(struct r852_device *dev)
+{
+ uint8_t dma_reg, dma_irq_reg;
+
+ /* Set up dma settings */
+ dma_reg = r852_read_reg_dword(dev, R852_DMA_SETTINGS);
+ dma_reg &= ~(R852_DMA_READ | R852_DMA_INTERNAL | R852_DMA_MEMORY);
+
+ if (dev->dma_dir)
+ dma_reg |= R852_DMA_READ;
+
+ if (dev->dma_state == DMA_INTERNAL) {
+ dma_reg |= R852_DMA_INTERNAL;
+ /* Precaution to make sure HW doesn't write */
+ /* to random kernel memory */
+ r852_write_reg_dword(dev, R852_DMA_ADDR,
+ cpu_to_le32(dev->phys_bounce_buffer));
+ } else {
+ dma_reg |= R852_DMA_MEMORY;
+ r852_write_reg_dword(dev, R852_DMA_ADDR,
+ cpu_to_le32(dev->phys_dma_addr));
+ }
+
+ /* Precaution: make sure write reached the device */
+ r852_read_reg_dword(dev, R852_DMA_ADDR);
+
+ r852_write_reg_dword(dev, R852_DMA_SETTINGS, dma_reg);
+
+ /* Set dma irq */
+ dma_irq_reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE,
+ dma_irq_reg |
+ R852_DMA_IRQ_INTERNAL |
+ R852_DMA_IRQ_ERROR |
+ R852_DMA_IRQ_MEMORY);
+}
+
+/*
+ * Disable dma, called from the interrupt handler, which specifies
+ * success of the operation via 'error' argument
+ */
+static void r852_dma_done(struct r852_device *dev, int error)
+{
+ WARN_ON(dev->dma_stage == 0);
+
+ r852_write_reg_dword(dev, R852_DMA_IRQ_STA,
+ r852_read_reg_dword(dev, R852_DMA_IRQ_STA));
+
+ r852_write_reg_dword(dev, R852_DMA_SETTINGS, 0);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE, 0);
+
+ /* Precaution to make sure HW doesn't write to random kernel memory */
+ r852_write_reg_dword(dev, R852_DMA_ADDR,
+ cpu_to_le32(dev->phys_bounce_buffer));
+ r852_read_reg_dword(dev, R852_DMA_ADDR);
+
+ dev->dma_error = error;
+ dev->dma_stage = 0;
+
+ if (dev->phys_dma_addr && dev->phys_dma_addr != dev->phys_bounce_buffer)
+ pci_unmap_single(dev->pci_dev, dev->phys_dma_addr, R852_DMA_LEN,
+ dev->dma_dir ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE);
+}
+
+/*
+ * Wait, till dma is done, which includes both phases of it
+ */
+static int r852_dma_wait(struct r852_device *dev)
+{
+ long timeout = wait_for_completion_timeout(&dev->dma_done,
+ msecs_to_jiffies(1000));
+ if (!timeout) {
+ dbg("timeout waiting for DMA interrupt");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+/*
+ * Read/Write one page using dma. Only pages can be read (512 bytes)
+*/
+static void r852_do_dma(struct r852_device *dev, uint8_t *buf, int do_read)
+{
+ int bounce = 0;
+ unsigned long flags;
+ int error;
+
+ dev->dma_error = 0;
+
+ /* Set dma direction */
+ dev->dma_dir = do_read;
+ dev->dma_stage = 1;
+ reinit_completion(&dev->dma_done);
+
+ dbg_verbose("doing dma %s ", do_read ? "read" : "write");
+
+ /* Set initial dma state: for reading first fill on board buffer,
+ from device, for writes first fill the buffer from memory*/
+ dev->dma_state = do_read ? DMA_INTERNAL : DMA_MEMORY;
+
+ /* if incoming buffer is not page aligned, we should do bounce */
+ if ((unsigned long)buf & (R852_DMA_LEN-1))
+ bounce = 1;
+
+ if (!bounce) {
+ dev->phys_dma_addr = pci_map_single(dev->pci_dev, (void *)buf,
+ R852_DMA_LEN,
+ (do_read ? PCI_DMA_FROMDEVICE : PCI_DMA_TODEVICE));
+
+ if (pci_dma_mapping_error(dev->pci_dev, dev->phys_dma_addr))
+ bounce = 1;
+ }
+
+ if (bounce) {
+ dbg_verbose("dma: using bounce buffer");
+ dev->phys_dma_addr = dev->phys_bounce_buffer;
+ if (!do_read)
+ memcpy(dev->bounce_buffer, buf, R852_DMA_LEN);
+ }
+
+ /* Enable DMA */
+ spin_lock_irqsave(&dev->irqlock, flags);
+ r852_dma_enable(dev);
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+
+ /* Wait till complete */
+ error = r852_dma_wait(dev);
+
+ if (error) {
+ r852_dma_done(dev, error);
+ return;
+ }
+
+ if (do_read && bounce)
+ memcpy((void *)buf, dev->bounce_buffer, R852_DMA_LEN);
+}
+
+/*
+ * Program data lines of the nand chip to send data to it
+ */
+static void r852_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+ uint32_t reg;
+
+ /* Don't allow any access to hardware if we suspect card removal */
+ if (dev->card_unstable)
+ return;
+
+ /* Special case for whole sector read */
+ if (len == R852_DMA_LEN && dev->dma_usable) {
+ r852_do_dma(dev, (uint8_t *)buf, 0);
+ return;
+ }
+
+ /* write DWORD chinks - faster */
+ while (len >= 4) {
+ reg = buf[0] | buf[1] << 8 | buf[2] << 16 | buf[3] << 24;
+ r852_write_reg_dword(dev, R852_DATALINE, reg);
+ buf += 4;
+ len -= 4;
+
+ }
+
+ /* write rest */
+ while (len > 0) {
+ r852_write_reg(dev, R852_DATALINE, *buf++);
+ len--;
+ }
+}
+
+/*
+ * Read data lines of the nand chip to retrieve data
+ */
+static void r852_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+ uint32_t reg;
+
+ if (dev->card_unstable) {
+ /* since we can't signal error here, at least, return
+ predictable buffer */
+ memset(buf, 0, len);
+ return;
+ }
+
+ /* special case for whole sector read */
+ if (len == R852_DMA_LEN && dev->dma_usable) {
+ r852_do_dma(dev, buf, 1);
+ return;
+ }
+
+ /* read in dword sized chunks */
+ while (len >= 4) {
+
+ reg = r852_read_reg_dword(dev, R852_DATALINE);
+ *buf++ = reg & 0xFF;
+ *buf++ = (reg >> 8) & 0xFF;
+ *buf++ = (reg >> 16) & 0xFF;
+ *buf++ = (reg >> 24) & 0xFF;
+ len -= 4;
+ }
+
+ /* read the reset by bytes */
+ while (len--)
+ *buf++ = r852_read_reg(dev, R852_DATALINE);
+}
+
+/*
+ * Read one byte from nand chip
+ */
+static uint8_t r852_read_byte(struct mtd_info *mtd)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+
+ /* Same problem as in r852_read_buf.... */
+ if (dev->card_unstable)
+ return 0;
+
+ return r852_read_reg(dev, R852_DATALINE);
+}
+
+/*
+ * Control several chip lines & send commands
+ */
+static void r852_cmdctl(struct mtd_info *mtd, int dat, unsigned int ctrl)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+
+ if (dev->card_unstable)
+ return;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+
+ dev->ctlreg &= ~(R852_CTL_DATA | R852_CTL_COMMAND |
+ R852_CTL_ON | R852_CTL_CARDENABLE);
+
+ if (ctrl & NAND_ALE)
+ dev->ctlreg |= R852_CTL_DATA;
+
+ if (ctrl & NAND_CLE)
+ dev->ctlreg |= R852_CTL_COMMAND;
+
+ if (ctrl & NAND_NCE)
+ dev->ctlreg |= (R852_CTL_CARDENABLE | R852_CTL_ON);
+ else
+ dev->ctlreg &= ~R852_CTL_WRITE;
+
+ /* when write is stareted, enable write access */
+ if (dat == NAND_CMD_ERASE1)
+ dev->ctlreg |= R852_CTL_WRITE;
+
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ }
+
+ /* HACK: NAND_CMD_SEQIN is called without NAND_CTRL_CHANGE, but we need
+ to set write mode */
+ if (dat == NAND_CMD_SEQIN && (dev->ctlreg & R852_CTL_COMMAND)) {
+ dev->ctlreg |= R852_CTL_WRITE;
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ }
+
+ if (dat != NAND_CMD_NONE)
+ r852_write_reg(dev, R852_DATALINE, dat);
+}
+
+/*
+ * Wait till card is ready.
+ * based on nand_wait, but returns errors on DMA error
+ */
+static int r852_wait(struct mtd_info *mtd, struct nand_chip *chip)
+{
+ struct r852_device *dev = chip->priv;
+
+ unsigned long timeout;
+ int status;
+
+ timeout = jiffies + (chip->state == FL_ERASING ?
+ msecs_to_jiffies(400) : msecs_to_jiffies(20));
+
+ while (time_before(jiffies, timeout))
+ if (chip->dev_ready(mtd))
+ break;
+
+ chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ status = (int)chip->read_byte(mtd);
+
+ /* Unfortunelly, no way to send detailed error status... */
+ if (dev->dma_error) {
+ status |= NAND_STATUS_FAIL;
+ dev->dma_error = 0;
+ }
+ return status;
+}
+
+/*
+ * Check if card is ready
+ */
+
+static int r852_ready(struct mtd_info *mtd)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+ return !(r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_BUSY);
+}
+
+
+/*
+ * Set ECC engine mode
+*/
+
+static void r852_ecc_hwctl(struct mtd_info *mtd, int mode)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+
+ if (dev->card_unstable)
+ return;
+
+ switch (mode) {
+ case NAND_ECC_READ:
+ case NAND_ECC_WRITE:
+ /* enable ecc generation/check*/
+ dev->ctlreg |= R852_CTL_ECC_ENABLE;
+
+ /* flush ecc buffer */
+ r852_write_reg(dev, R852_CTL,
+ dev->ctlreg | R852_CTL_ECC_ACCESS);
+
+ r852_read_reg_dword(dev, R852_DATALINE);
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ return;
+
+ case NAND_ECC_READSYN:
+ /* disable ecc generation */
+ dev->ctlreg &= ~R852_CTL_ECC_ENABLE;
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ }
+}
+
+/*
+ * Calculate ECC, only used for writes
+ */
+
+static int r852_ecc_calculate(struct mtd_info *mtd, const uint8_t *dat,
+ uint8_t *ecc_code)
+{
+ struct r852_device *dev = r852_get_dev(mtd);
+ struct sm_oob *oob = (struct sm_oob *)ecc_code;
+ uint32_t ecc1, ecc2;
+
+ if (dev->card_unstable)
+ return 0;
+
+ dev->ctlreg &= ~R852_CTL_ECC_ENABLE;
+ r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
+
+ ecc1 = r852_read_reg_dword(dev, R852_DATALINE);
+ ecc2 = r852_read_reg_dword(dev, R852_DATALINE);
+
+ oob->ecc1[0] = (ecc1) & 0xFF;
+ oob->ecc1[1] = (ecc1 >> 8) & 0xFF;
+ oob->ecc1[2] = (ecc1 >> 16) & 0xFF;
+
+ oob->ecc2[0] = (ecc2) & 0xFF;
+ oob->ecc2[1] = (ecc2 >> 8) & 0xFF;
+ oob->ecc2[2] = (ecc2 >> 16) & 0xFF;
+
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+ return 0;
+}
+
+/*
+ * Correct the data using ECC, hw did almost everything for us
+ */
+
+static int r852_ecc_correct(struct mtd_info *mtd, uint8_t *dat,
+ uint8_t *read_ecc, uint8_t *calc_ecc)
+{
+ uint32_t ecc_reg;
+ uint8_t ecc_status, err_byte;
+ int i, error = 0;
+
+ struct r852_device *dev = r852_get_dev(mtd);
+
+ if (dev->card_unstable)
+ return 0;
+
+ if (dev->dma_error) {
+ dev->dma_error = 0;
+ return -1;
+ }
+
+ r852_write_reg(dev, R852_CTL, dev->ctlreg | R852_CTL_ECC_ACCESS);
+ ecc_reg = r852_read_reg_dword(dev, R852_DATALINE);
+ r852_write_reg(dev, R852_CTL, dev->ctlreg);
+
+ for (i = 0 ; i <= 1 ; i++) {
+
+ ecc_status = (ecc_reg >> 8) & 0xFF;
+
+ /* ecc uncorrectable error */
+ if (ecc_status & R852_ECC_FAIL) {
+ dbg("ecc: unrecoverable error, in half %d", i);
+ error = -1;
+ goto exit;
+ }
+
+ /* correctable error */
+ if (ecc_status & R852_ECC_CORRECTABLE) {
+
+ err_byte = ecc_reg & 0xFF;
+ dbg("ecc: recoverable error, "
+ "in half %d, byte %d, bit %d", i,
+ err_byte, ecc_status & R852_ECC_ERR_BIT_MSK);
+
+ dat[err_byte] ^=
+ 1 << (ecc_status & R852_ECC_ERR_BIT_MSK);
+ error++;
+ }
+
+ dat += 256;
+ ecc_reg >>= 16;
+ }
+exit:
+ return error;
+}
+
+/*
+ * This is copy of nand_read_oob_std
+ * nand_read_oob_syndrome assumes we can send column address - we can't
+ */
+static int r852_read_oob(struct mtd_info *mtd, struct nand_chip *chip,
+ int page)
+{
+ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+/*
+ * Start the nand engine
+ */
+
+static void r852_engine_enable(struct r852_device *dev)
+{
+ if (r852_read_reg_dword(dev, R852_HW) & R852_HW_UNKNOWN) {
+ r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
+ r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED);
+ } else {
+ r852_write_reg_dword(dev, R852_HW, R852_HW_ENABLED);
+ r852_write_reg(dev, R852_CTL, R852_CTL_RESET | R852_CTL_ON);
+ }
+ msleep(300);
+ r852_write_reg(dev, R852_CTL, 0);
+}
+
+
+/*
+ * Stop the nand engine
+ */
+
+static void r852_engine_disable(struct r852_device *dev)
+{
+ r852_write_reg_dword(dev, R852_HW, 0);
+ r852_write_reg(dev, R852_CTL, R852_CTL_RESET);
+}
+
+/*
+ * Test if card is present
+ */
+
+static void r852_card_update_present(struct r852_device *dev)
+{
+ unsigned long flags;
+ uint8_t reg;
+
+ spin_lock_irqsave(&dev->irqlock, flags);
+ reg = r852_read_reg(dev, R852_CARD_STA);
+ dev->card_detected = !!(reg & R852_CARD_STA_PRESENT);
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+}
+
+/*
+ * Update card detection IRQ state according to current card state
+ * which is read in r852_card_update_present
+ */
+static void r852_update_card_detect(struct r852_device *dev)
+{
+ int card_detect_reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
+ dev->card_unstable = 0;
+
+ card_detect_reg &= ~(R852_CARD_IRQ_REMOVE | R852_CARD_IRQ_INSERT);
+ card_detect_reg |= R852_CARD_IRQ_GENABLE;
+
+ card_detect_reg |= dev->card_detected ?
+ R852_CARD_IRQ_REMOVE : R852_CARD_IRQ_INSERT;
+
+ r852_write_reg(dev, R852_CARD_IRQ_ENABLE, card_detect_reg);
+}
+
+static ssize_t r852_media_type_show(struct device *sys_dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mtd_info *mtd = container_of(sys_dev, struct mtd_info, dev);
+ struct r852_device *dev = r852_get_dev(mtd);
+ char *data = dev->sm ? "smartmedia" : "xd";
+
+ strcpy(buf, data);
+ return strlen(data);
+}
+
+static DEVICE_ATTR(media_type, S_IRUGO, r852_media_type_show, NULL);
+
+
+/* Detect properties of card in slot */
+static void r852_update_media_status(struct r852_device *dev)
+{
+ uint8_t reg;
+ unsigned long flags;
+ int readonly;
+
+ spin_lock_irqsave(&dev->irqlock, flags);
+ if (!dev->card_detected) {
+ message("card removed");
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+ return ;
+ }
+
+ readonly = r852_read_reg(dev, R852_CARD_STA) & R852_CARD_STA_RO;
+ reg = r852_read_reg(dev, R852_DMA_CAP);
+ dev->sm = (reg & (R852_DMA1 | R852_DMA2)) && (reg & R852_SMBIT);
+
+ message("detected %s %s card in slot",
+ dev->sm ? "SmartMedia" : "xD",
+ readonly ? "readonly" : "writeable");
+
+ dev->readonly = readonly;
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+}
+
+/*
+ * Register the nand device
+ * Called when the card is detected
+ */
+static int r852_register_nand_device(struct r852_device *dev)
+{
+ dev->mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL);
+
+ if (!dev->mtd)
+ goto error1;
+
+ WARN_ON(dev->card_registred);
+
+ dev->mtd->priv = dev->chip;
+ dev->mtd->dev.parent = &dev->pci_dev->dev;
+
+ if (dev->readonly)
+ dev->chip->options |= NAND_ROM;
+
+ r852_engine_enable(dev);
+
+ if (sm_register_device(dev->mtd, dev->sm))
+ goto error2;
+
+ if (device_create_file(&dev->mtd->dev, &dev_attr_media_type)) {
+ message("can't create media type sysfs attribute");
+ goto error3;
+ }
+
+ dev->card_registred = 1;
+ return 0;
+error3:
+ nand_release(dev->mtd);
+error2:
+ kfree(dev->mtd);
+error1:
+ /* Force card redetect */
+ dev->card_detected = 0;
+ return -1;
+}
+
+/*
+ * Unregister the card
+ */
+
+static void r852_unregister_nand_device(struct r852_device *dev)
+{
+ if (!dev->card_registred)
+ return;
+
+ device_remove_file(&dev->mtd->dev, &dev_attr_media_type);
+ nand_release(dev->mtd);
+ r852_engine_disable(dev);
+ dev->card_registred = 0;
+ kfree(dev->mtd);
+ dev->mtd = NULL;
+}
+
+/* Card state updater */
+static void r852_card_detect_work(struct work_struct *work)
+{
+ struct r852_device *dev =
+ container_of(work, struct r852_device, card_detect_work.work);
+
+ r852_card_update_present(dev);
+ r852_update_card_detect(dev);
+ dev->card_unstable = 0;
+
+ /* False alarm */
+ if (dev->card_detected == dev->card_registred)
+ goto exit;
+
+ /* Read media properties */
+ r852_update_media_status(dev);
+
+ /* Register the card */
+ if (dev->card_detected)
+ r852_register_nand_device(dev);
+ else
+ r852_unregister_nand_device(dev);
+exit:
+ r852_update_card_detect(dev);
+}
+
+/* Ack + disable IRQ generation */
+static void r852_disable_irqs(struct r852_device *dev)
+{
+ uint8_t reg;
+ reg = r852_read_reg(dev, R852_CARD_IRQ_ENABLE);
+ r852_write_reg(dev, R852_CARD_IRQ_ENABLE, reg & ~R852_CARD_IRQ_MASK);
+
+ reg = r852_read_reg_dword(dev, R852_DMA_IRQ_ENABLE);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_ENABLE,
+ reg & ~R852_DMA_IRQ_MASK);
+
+ r852_write_reg(dev, R852_CARD_IRQ_STA, R852_CARD_IRQ_MASK);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_STA, R852_DMA_IRQ_MASK);
+}
+
+/* Interrupt handler */
+static irqreturn_t r852_irq(int irq, void *data)
+{
+ struct r852_device *dev = (struct r852_device *)data;
+
+ uint8_t card_status, dma_status;
+ unsigned long flags;
+ irqreturn_t ret = IRQ_NONE;
+
+ spin_lock_irqsave(&dev->irqlock, flags);
+
+ /* handle card detection interrupts first */
+ card_status = r852_read_reg(dev, R852_CARD_IRQ_STA);
+ r852_write_reg(dev, R852_CARD_IRQ_STA, card_status);
+
+ if (card_status & (R852_CARD_IRQ_INSERT|R852_CARD_IRQ_REMOVE)) {
+
+ ret = IRQ_HANDLED;
+ dev->card_detected = !!(card_status & R852_CARD_IRQ_INSERT);
+
+ /* we shouldn't receive any interrupts if we wait for card
+ to settle */
+ WARN_ON(dev->card_unstable);
+
+ /* disable irqs while card is unstable */
+ /* this will timeout DMA if active, but better that garbage */
+ r852_disable_irqs(dev);
+
+ if (dev->card_unstable)
+ goto out;
+
+ /* let, card state to settle a bit, and then do the work */
+ dev->card_unstable = 1;
+ queue_delayed_work(dev->card_workqueue,
+ &dev->card_detect_work, msecs_to_jiffies(100));
+ goto out;
+ }
+
+
+ /* Handle dma interrupts */
+ dma_status = r852_read_reg_dword(dev, R852_DMA_IRQ_STA);
+ r852_write_reg_dword(dev, R852_DMA_IRQ_STA, dma_status);
+
+ if (dma_status & R852_DMA_IRQ_MASK) {
+
+ ret = IRQ_HANDLED;
+
+ if (dma_status & R852_DMA_IRQ_ERROR) {
+ dbg("received dma error IRQ");
+ r852_dma_done(dev, -EIO);
+ complete(&dev->dma_done);
+ goto out;
+ }
+
+ /* received DMA interrupt out of nowhere? */
+ WARN_ON_ONCE(dev->dma_stage == 0);
+
+ if (dev->dma_stage == 0)
+ goto out;
+
+ /* done device access */
+ if (dev->dma_state == DMA_INTERNAL &&
+ (dma_status & R852_DMA_IRQ_INTERNAL)) {
+
+ dev->dma_state = DMA_MEMORY;
+ dev->dma_stage++;
+ }
+
+ /* done memory DMA */
+ if (dev->dma_state == DMA_MEMORY &&
+ (dma_status & R852_DMA_IRQ_MEMORY)) {
+ dev->dma_state = DMA_INTERNAL;
+ dev->dma_stage++;
+ }
+
+ /* Enable 2nd half of dma dance */
+ if (dev->dma_stage == 2)
+ r852_dma_enable(dev);
+
+ /* Operation done */
+ if (dev->dma_stage == 3) {
+ r852_dma_done(dev, 0);
+ complete(&dev->dma_done);
+ }
+ goto out;
+ }
+
+ /* Handle unknown interrupts */
+ if (dma_status)
+ dbg("bad dma IRQ status = %x", dma_status);
+
+ if (card_status & ~R852_CARD_STA_CD)
+ dbg("strange card status = %x", card_status);
+
+out:
+ spin_unlock_irqrestore(&dev->irqlock, flags);
+ return ret;
+}
+
+static int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
+{
+ int error;
+ struct nand_chip *chip;
+ struct r852_device *dev;
+
+ /* pci initialization */
+ error = pci_enable_device(pci_dev);
+
+ if (error)
+ goto error1;
+
+ pci_set_master(pci_dev);
+
+ error = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
+ if (error)
+ goto error2;
+
+ error = pci_request_regions(pci_dev, DRV_NAME);
+
+ if (error)
+ goto error3;
+
+ error = -ENOMEM;
+
+ /* init nand chip, but register it only on card insert */
+ chip = kzalloc(sizeof(struct nand_chip), GFP_KERNEL);
+
+ if (!chip)
+ goto error4;
+
+ /* commands */
+ chip->cmd_ctrl = r852_cmdctl;
+ chip->waitfunc = r852_wait;
+ chip->dev_ready = r852_ready;
+
+ /* I/O */
+ chip->read_byte = r852_read_byte;
+ chip->read_buf = r852_read_buf;
+ chip->write_buf = r852_write_buf;
+
+ /* ecc */
+ chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+ chip->ecc.size = R852_DMA_LEN;
+ chip->ecc.bytes = SM_OOB_SIZE;
+ chip->ecc.strength = 2;
+ chip->ecc.hwctl = r852_ecc_hwctl;
+ chip->ecc.calculate = r852_ecc_calculate;
+ chip->ecc.correct = r852_ecc_correct;
+
+ /* TODO: hack */
+ chip->ecc.read_oob = r852_read_oob;
+
+ /* init our device structure */
+ dev = kzalloc(sizeof(struct r852_device), GFP_KERNEL);
+
+ if (!dev)
+ goto error5;
+
+ chip->priv = dev;
+ dev->chip = chip;
+ dev->pci_dev = pci_dev;
+ pci_set_drvdata(pci_dev, dev);
+
+ dev->bounce_buffer = pci_alloc_consistent(pci_dev, R852_DMA_LEN,
+ &dev->phys_bounce_buffer);
+
+ if (!dev->bounce_buffer)
+ goto error6;
+
+
+ error = -ENODEV;
+ dev->mmio = pci_ioremap_bar(pci_dev, 0);
+
+ if (!dev->mmio)
+ goto error7;
+
+ error = -ENOMEM;
+ dev->tmp_buffer = kzalloc(SM_SECTOR_SIZE, GFP_KERNEL);
+
+ if (!dev->tmp_buffer)
+ goto error8;
+
+ init_completion(&dev->dma_done);
+
+ dev->card_workqueue = create_freezable_workqueue(DRV_NAME);
+
+ if (!dev->card_workqueue)
+ goto error9;
+
+ INIT_DELAYED_WORK(&dev->card_detect_work, r852_card_detect_work);
+
+ /* shutdown everything - precation */
+ r852_engine_disable(dev);
+ r852_disable_irqs(dev);
+
+ r852_dma_test(dev);
+
+ dev->irq = pci_dev->irq;
+ spin_lock_init(&dev->irqlock);
+
+ dev->card_detected = 0;
+ r852_card_update_present(dev);
+
+ /*register irq handler*/
+ error = -ENODEV;
+ if (request_irq(pci_dev->irq, &r852_irq, IRQF_SHARED,
+ DRV_NAME, dev))
+ goto error10;
+
+ /* kick initial present test */
+ queue_delayed_work(dev->card_workqueue,
+ &dev->card_detect_work, 0);
+
+
+ printk(KERN_NOTICE DRV_NAME ": driver loaded successfully\n");
+ return 0;
+
+error10:
+ destroy_workqueue(dev->card_workqueue);
+error9:
+ kfree(dev->tmp_buffer);
+error8:
+ pci_iounmap(pci_dev, dev->mmio);
+error7:
+ pci_free_consistent(pci_dev, R852_DMA_LEN,
+ dev->bounce_buffer, dev->phys_bounce_buffer);
+error6:
+ kfree(dev);
+error5:
+ kfree(chip);
+error4:
+ pci_release_regions(pci_dev);
+error3:
+error2:
+ pci_disable_device(pci_dev);
+error1:
+ return error;
+}
+
+static void r852_remove(struct pci_dev *pci_dev)
+{
+ struct r852_device *dev = pci_get_drvdata(pci_dev);
+
+ /* Stop detect workqueue -
+ we are going to unregister the device anyway*/
+ cancel_delayed_work_sync(&dev->card_detect_work);
+ destroy_workqueue(dev->card_workqueue);
+
+ /* Unregister the device, this might make more IO */
+ r852_unregister_nand_device(dev);
+
+ /* Stop interrupts */
+ r852_disable_irqs(dev);
+ synchronize_irq(dev->irq);
+ free_irq(dev->irq, dev);
+
+ /* Cleanup */
+ kfree(dev->tmp_buffer);
+ pci_iounmap(pci_dev, dev->mmio);
+ pci_free_consistent(pci_dev, R852_DMA_LEN,
+ dev->bounce_buffer, dev->phys_bounce_buffer);
+
+ kfree(dev->chip);
+ kfree(dev);
+
+ /* Shutdown the PCI device */
+ pci_release_regions(pci_dev);
+ pci_disable_device(pci_dev);
+}
+
+static void r852_shutdown(struct pci_dev *pci_dev)
+{
+ struct r852_device *dev = pci_get_drvdata(pci_dev);
+
+ cancel_delayed_work_sync(&dev->card_detect_work);
+ r852_disable_irqs(dev);
+ synchronize_irq(dev->irq);
+ pci_disable_device(pci_dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int r852_suspend(struct device *device)
+{
+ struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
+
+ if (dev->ctlreg & R852_CTL_CARDENABLE)
+ return -EBUSY;
+
+ /* First make sure the detect work is gone */
+ cancel_delayed_work_sync(&dev->card_detect_work);
+
+ /* Turn off the interrupts and stop the device */
+ r852_disable_irqs(dev);
+ r852_engine_disable(dev);
+
+ /* If card was pulled off just during the suspend, which is very
+ unlikely, we will remove it on resume, it too late now
+ anyway... */
+ dev->card_unstable = 0;
+ return 0;
+}
+
+static int r852_resume(struct device *device)
+{
+ struct r852_device *dev = pci_get_drvdata(to_pci_dev(device));
+
+ r852_disable_irqs(dev);
+ r852_card_update_present(dev);
+ r852_engine_disable(dev);
+
+
+ /* If card status changed, just do the work */
+ if (dev->card_detected != dev->card_registred) {
+ dbg("card was %s during low power state",
+ dev->card_detected ? "added" : "removed");
+
+ queue_delayed_work(dev->card_workqueue,
+ &dev->card_detect_work, msecs_to_jiffies(1000));
+ return 0;
+ }
+
+ /* Otherwise, initialize the card */
+ if (dev->card_registred) {
+ r852_engine_enable(dev);
+ dev->chip->select_chip(dev->mtd, 0);
+ dev->chip->cmdfunc(dev->mtd, NAND_CMD_RESET, -1, -1);
+ dev->chip->select_chip(dev->mtd, -1);
+ }
+
+ /* Program card detection IRQ */
+ r852_update_card_detect(dev);
+ return 0;
+}
+#endif
+
+static const struct pci_device_id r852_pci_id_tbl[] = {
+
+ { PCI_VDEVICE(RICOH, 0x0852), },
+ { },
+};
+
+MODULE_DEVICE_TABLE(pci, r852_pci_id_tbl);
+
+static SIMPLE_DEV_PM_OPS(r852_pm_ops, r852_suspend, r852_resume);
+
+static struct pci_driver r852_pci_driver = {
+ .name = DRV_NAME,
+ .id_table = r852_pci_id_tbl,
+ .probe = r852_probe,
+ .remove = r852_remove,
+ .shutdown = r852_shutdown,
+ .driver.pm = &r852_pm_ops,
+};
+
+module_pci_driver(r852_pci_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
+MODULE_DESCRIPTION("Ricoh 85xx xD/smartmedia card reader driver");
diff --git a/drivers/mtd/nand/r852.h b/drivers/mtd/nand/r852.h
new file mode 100644
index 0000000..e6a21d9
--- /dev/null
+++ b/drivers/mtd/nand/r852.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright © 2009 - Maxim Levitsky
+ * driver for Ricoh xD readers
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/pci.h>
+#include <linux/completion.h>
+#include <linux/workqueue.h>
+#include <linux/mtd/nand.h>
+#include <linux/spinlock.h>
+
+
+/* nand interface + ecc
+ byte write/read does one cycle on nand data lines.
+ dword write/read does 4 cycles
+ if R852_CTL_ECC_ACCESS is set in R852_CTL, then dword read reads
+ results of ecc correction, if DMA read was done before.
+ If write was done two dword reads read generated ecc checksums
+*/
+#define R852_DATALINE 0x00
+
+/* control register */
+#define R852_CTL 0x04
+#define R852_CTL_COMMAND 0x01 /* send command (#CLE)*/
+#define R852_CTL_DATA 0x02 /* read/write data (#ALE)*/
+#define R852_CTL_ON 0x04 /* only seem to controls the hd led, */
+ /* but has to be set on start...*/
+#define R852_CTL_RESET 0x08 /* unknown, set only on start once*/
+#define R852_CTL_CARDENABLE 0x10 /* probably (#CE) - always set*/
+#define R852_CTL_ECC_ENABLE 0x20 /* enable ecc engine */
+#define R852_CTL_ECC_ACCESS 0x40 /* read/write ecc via reg #0*/
+#define R852_CTL_WRITE 0x80 /* set when performing writes (#WP) */
+
+/* card detection status */
+#define R852_CARD_STA 0x05
+
+#define R852_CARD_STA_CD 0x01 /* state of #CD line, same as 0x04 */
+#define R852_CARD_STA_RO 0x02 /* card is readonly */
+#define R852_CARD_STA_PRESENT 0x04 /* card is present (#CD) */
+#define R852_CARD_STA_ABSENT 0x08 /* card is absent */
+#define R852_CARD_STA_BUSY 0x80 /* card is busy - (#R/B) */
+
+/* card detection irq status & enable*/
+#define R852_CARD_IRQ_STA 0x06 /* IRQ status */
+#define R852_CARD_IRQ_ENABLE 0x07 /* IRQ enable */
+
+#define R852_CARD_IRQ_CD 0x01 /* fire when #CD lights, same as 0x04*/
+#define R852_CARD_IRQ_REMOVE 0x04 /* detect card removal */
+#define R852_CARD_IRQ_INSERT 0x08 /* detect card insert */
+#define R852_CARD_IRQ_UNK1 0x10 /* unknown */
+#define R852_CARD_IRQ_GENABLE 0x80 /* general enable */
+#define R852_CARD_IRQ_MASK 0x1D
+
+
+
+/* hardware enable */
+#define R852_HW 0x08
+#define R852_HW_ENABLED 0x01 /* hw enabled */
+#define R852_HW_UNKNOWN 0x80
+
+
+/* dma capabilities */
+#define R852_DMA_CAP 0x09
+#define R852_SMBIT 0x20 /* if set with bit #6 or bit #7, then */
+ /* hw is smartmedia */
+#define R852_DMA1 0x40 /* if set w/bit #7, dma is supported */
+#define R852_DMA2 0x80 /* if set w/bit #6, dma is supported */
+
+
+/* physical DMA address - 32 bit value*/
+#define R852_DMA_ADDR 0x0C
+
+
+/* dma settings */
+#define R852_DMA_SETTINGS 0x10
+#define R852_DMA_MEMORY 0x01 /* (memory <-> internal hw buffer) */
+#define R852_DMA_READ 0x02 /* 0 = write, 1 = read */
+#define R852_DMA_INTERNAL 0x04 /* (internal hw buffer <-> card) */
+
+/* dma IRQ status */
+#define R852_DMA_IRQ_STA 0x14
+
+/* dma IRQ enable */
+#define R852_DMA_IRQ_ENABLE 0x18
+
+#define R852_DMA_IRQ_MEMORY 0x01 /* (memory <-> internal hw buffer) */
+#define R852_DMA_IRQ_ERROR 0x02 /* error did happen */
+#define R852_DMA_IRQ_INTERNAL 0x04 /* (internal hw buffer <-> card) */
+#define R852_DMA_IRQ_MASK 0x07 /* mask of all IRQ bits */
+
+
+/* ECC syndrome format - read from reg #0 will return two copies of these for
+ each half of the page.
+ first byte is error byte location, and second, bit location + flags */
+#define R852_ECC_ERR_BIT_MSK 0x07 /* error bit location */
+#define R852_ECC_CORRECT 0x10 /* no errors - (guessed) */
+#define R852_ECC_CORRECTABLE 0x20 /* correctable error exist */
+#define R852_ECC_FAIL 0x40 /* non correctable error detected */
+
+#define R852_DMA_LEN 512
+
+#define DMA_INTERNAL 0
+#define DMA_MEMORY 1
+
+struct r852_device {
+ void __iomem *mmio; /* mmio */
+ struct mtd_info *mtd; /* mtd backpointer */
+ struct nand_chip *chip; /* nand chip backpointer */
+ struct pci_dev *pci_dev; /* pci backpointer */
+
+ /* dma area */
+ dma_addr_t phys_dma_addr; /* bus address of buffer*/
+ struct completion dma_done; /* data transfer done */
+
+ dma_addr_t phys_bounce_buffer; /* bus address of bounce buffer */
+ uint8_t *bounce_buffer; /* virtual address of bounce buffer */
+
+ int dma_dir; /* 1 = read, 0 = write */
+ int dma_stage; /* 0 - idle, 1 - first step,
+ 2 - second step */
+
+ int dma_state; /* 0 = internal, 1 = memory */
+ int dma_error; /* dma errors */
+ int dma_usable; /* is it possible to use dma */
+
+ /* card status area */
+ struct delayed_work card_detect_work;
+ struct workqueue_struct *card_workqueue;
+ int card_registred; /* card registered with mtd */
+ int card_detected; /* card detected in slot */
+ int card_unstable; /* whenever the card is inserted,
+ is not known yet */
+ int readonly; /* card is readonly */
+ int sm; /* Is card smartmedia */
+
+ /* interrupt handling */
+ spinlock_t irqlock; /* IRQ protecting lock */
+ int irq; /* irq num */
+ /* misc */
+ void *tmp_buffer; /* temporary buffer */
+ uint8_t ctlreg; /* cached contents of control reg */
+};
+
+#define DRV_NAME "r852"
+
+
+#define dbg(format, ...) \
+ if (debug) \
+ printk(KERN_DEBUG DRV_NAME ": " format "\n", ## __VA_ARGS__)
+
+#define dbg_verbose(format, ...) \
+ if (debug > 1) \
+ printk(KERN_DEBUG DRV_NAME ": " format "\n", ## __VA_ARGS__)
+
+
+#define message(format, ...) \
+ printk(KERN_INFO DRV_NAME ": " format "\n", ## __VA_ARGS__)
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
new file mode 100644
index 0000000..05105ca
--- /dev/null
+++ b/drivers/mtd/nand/s3c2410.c
@@ -0,0 +1,1142 @@
+/* linux/drivers/mtd/nand/s3c2410.c
+ *
+ * Copyright © 2004-2008 Simtec Electronics
+ * http://armlinux.simtec.co.uk/
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C2410/S3C2440/S3C2412 NAND driver
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+*/
+
+#define pr_fmt(fmt) "nand-s3c2410: " fmt
+
+#ifdef CONFIG_MTD_NAND_S3C2410_DEBUG
+#define DEBUG
+#endif
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/io.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+#include <linux/cpufreq.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+
+#include <linux/platform_data/mtd-nand-s3c2410.h>
+
+#define S3C2410_NFREG(x) (x)
+
+#define S3C2410_NFCONF S3C2410_NFREG(0x00)
+#define S3C2410_NFCMD S3C2410_NFREG(0x04)
+#define S3C2410_NFADDR S3C2410_NFREG(0x08)
+#define S3C2410_NFDATA S3C2410_NFREG(0x0C)
+#define S3C2410_NFSTAT S3C2410_NFREG(0x10)
+#define S3C2410_NFECC S3C2410_NFREG(0x14)
+#define S3C2440_NFCONT S3C2410_NFREG(0x04)
+#define S3C2440_NFCMD S3C2410_NFREG(0x08)
+#define S3C2440_NFADDR S3C2410_NFREG(0x0C)
+#define S3C2440_NFDATA S3C2410_NFREG(0x10)
+#define S3C2440_NFSTAT S3C2410_NFREG(0x20)
+#define S3C2440_NFMECC0 S3C2410_NFREG(0x2C)
+#define S3C2412_NFSTAT S3C2410_NFREG(0x28)
+#define S3C2412_NFMECC0 S3C2410_NFREG(0x34)
+#define S3C2410_NFCONF_EN (1<<15)
+#define S3C2410_NFCONF_INITECC (1<<12)
+#define S3C2410_NFCONF_nFCE (1<<11)
+#define S3C2410_NFCONF_TACLS(x) ((x)<<8)
+#define S3C2410_NFCONF_TWRPH0(x) ((x)<<4)
+#define S3C2410_NFCONF_TWRPH1(x) ((x)<<0)
+#define S3C2410_NFSTAT_BUSY (1<<0)
+#define S3C2440_NFCONF_TACLS(x) ((x)<<12)
+#define S3C2440_NFCONF_TWRPH0(x) ((x)<<8)
+#define S3C2440_NFCONF_TWRPH1(x) ((x)<<4)
+#define S3C2440_NFCONT_INITECC (1<<4)
+#define S3C2440_NFCONT_nFCE (1<<1)
+#define S3C2440_NFCONT_ENABLE (1<<0)
+#define S3C2440_NFSTAT_READY (1<<0)
+#define S3C2412_NFCONF_NANDBOOT (1<<31)
+#define S3C2412_NFCONT_INIT_MAIN_ECC (1<<5)
+#define S3C2412_NFCONT_nFCE0 (1<<1)
+#define S3C2412_NFSTAT_READY (1<<0)
+
+/* new oob placement block for use with hardware ecc generation
+ */
+
+static struct nand_ecclayout nand_hw_eccoob = {
+ .eccbytes = 3,
+ .eccpos = {0, 1, 2},
+ .oobfree = {{8, 8}}
+};
+
+/* controller and mtd information */
+
+struct s3c2410_nand_info;
+
+/**
+ * struct s3c2410_nand_mtd - driver MTD structure
+ * @mtd: The MTD instance to pass to the MTD layer.
+ * @chip: The NAND chip information.
+ * @set: The platform information supplied for this set of NAND chips.
+ * @info: Link back to the hardware information.
+ * @scan_res: The result from calling nand_scan_ident().
+*/
+struct s3c2410_nand_mtd {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ struct s3c2410_nand_set *set;
+ struct s3c2410_nand_info *info;
+ int scan_res;
+};
+
+enum s3c_cpu_type {
+ TYPE_S3C2410,
+ TYPE_S3C2412,
+ TYPE_S3C2440,
+};
+
+enum s3c_nand_clk_state {
+ CLOCK_DISABLE = 0,
+ CLOCK_ENABLE,
+ CLOCK_SUSPEND,
+};
+
+/* overview of the s3c2410 nand state */
+
+/**
+ * struct s3c2410_nand_info - NAND controller state.
+ * @mtds: An array of MTD instances on this controoler.
+ * @platform: The platform data for this board.
+ * @device: The platform device we bound to.
+ * @clk: The clock resource for this controller.
+ * @regs: The area mapped for the hardware registers.
+ * @sel_reg: Pointer to the register controlling the NAND selection.
+ * @sel_bit: The bit in @sel_reg to select the NAND chip.
+ * @mtd_count: The number of MTDs created from this controller.
+ * @save_sel: The contents of @sel_reg to be saved over suspend.
+ * @clk_rate: The clock rate from @clk.
+ * @clk_state: The current clock state.
+ * @cpu_type: The exact type of this controller.
+ */
+struct s3c2410_nand_info {
+ /* mtd info */
+ struct nand_hw_control controller;
+ struct s3c2410_nand_mtd *mtds;
+ struct s3c2410_platform_nand *platform;
+
+ /* device info */
+ struct device *device;
+ struct clk *clk;
+ void __iomem *regs;
+ void __iomem *sel_reg;
+ int sel_bit;
+ int mtd_count;
+ unsigned long save_sel;
+ unsigned long clk_rate;
+ enum s3c_nand_clk_state clk_state;
+
+ enum s3c_cpu_type cpu_type;
+
+#ifdef CONFIG_CPU_FREQ
+ struct notifier_block freq_transition;
+#endif
+};
+
+/* conversion functions */
+
+static struct s3c2410_nand_mtd *s3c2410_nand_mtd_toours(struct mtd_info *mtd)
+{
+ return container_of(mtd, struct s3c2410_nand_mtd, mtd);
+}
+
+static struct s3c2410_nand_info *s3c2410_nand_mtd_toinfo(struct mtd_info *mtd)
+{
+ return s3c2410_nand_mtd_toours(mtd)->info;
+}
+
+static struct s3c2410_nand_info *to_nand_info(struct platform_device *dev)
+{
+ return platform_get_drvdata(dev);
+}
+
+static struct s3c2410_platform_nand *to_nand_plat(struct platform_device *dev)
+{
+ return dev_get_platdata(&dev->dev);
+}
+
+static inline int allow_clk_suspend(struct s3c2410_nand_info *info)
+{
+#ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP
+ return 1;
+#else
+ return 0;
+#endif
+}
+
+/**
+ * s3c2410_nand_clk_set_state - Enable, disable or suspend NAND clock.
+ * @info: The controller instance.
+ * @new_state: State to which clock should be set.
+ */
+static void s3c2410_nand_clk_set_state(struct s3c2410_nand_info *info,
+ enum s3c_nand_clk_state new_state)
+{
+ if (!allow_clk_suspend(info) && new_state == CLOCK_SUSPEND)
+ return;
+
+ if (info->clk_state == CLOCK_ENABLE) {
+ if (new_state != CLOCK_ENABLE)
+ clk_disable_unprepare(info->clk);
+ } else {
+ if (new_state == CLOCK_ENABLE)
+ clk_prepare_enable(info->clk);
+ }
+
+ info->clk_state = new_state;
+}
+
+/* timing calculations */
+
+#define NS_IN_KHZ 1000000
+
+/**
+ * s3c_nand_calc_rate - calculate timing data.
+ * @wanted: The cycle time in nanoseconds.
+ * @clk: The clock rate in kHz.
+ * @max: The maximum divider value.
+ *
+ * Calculate the timing value from the given parameters.
+ */
+static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max)
+{
+ int result;
+
+ result = DIV_ROUND_UP((wanted * clk), NS_IN_KHZ);
+
+ pr_debug("result %d from %ld, %d\n", result, clk, wanted);
+
+ if (result > max) {
+ pr_err("%d ns is too big for current clock rate %ld\n",
+ wanted, clk);
+ return -1;
+ }
+
+ if (result < 1)
+ result = 1;
+
+ return result;
+}
+
+#define to_ns(ticks, clk) (((ticks) * NS_IN_KHZ) / (unsigned int)(clk))
+
+/* controller setup */
+
+/**
+ * s3c2410_nand_setrate - setup controller timing information.
+ * @info: The controller instance.
+ *
+ * Given the information supplied by the platform, calculate and set
+ * the necessary timing registers in the hardware to generate the
+ * necessary timing cycles to the hardware.
+ */
+static int s3c2410_nand_setrate(struct s3c2410_nand_info *info)
+{
+ struct s3c2410_platform_nand *plat = info->platform;
+ int tacls_max = (info->cpu_type == TYPE_S3C2412) ? 8 : 4;
+ int tacls, twrph0, twrph1;
+ unsigned long clkrate = clk_get_rate(info->clk);
+ unsigned long uninitialized_var(set), cfg, uninitialized_var(mask);
+ unsigned long flags;
+
+ /* calculate the timing information for the controller */
+
+ info->clk_rate = clkrate;
+ clkrate /= 1000; /* turn clock into kHz for ease of use */
+
+ if (plat != NULL) {
+ tacls = s3c_nand_calc_rate(plat->tacls, clkrate, tacls_max);
+ twrph0 = s3c_nand_calc_rate(plat->twrph0, clkrate, 8);
+ twrph1 = s3c_nand_calc_rate(plat->twrph1, clkrate, 8);
+ } else {
+ /* default timings */
+ tacls = tacls_max;
+ twrph0 = 8;
+ twrph1 = 8;
+ }
+
+ if (tacls < 0 || twrph0 < 0 || twrph1 < 0) {
+ dev_err(info->device, "cannot get suitable timings\n");
+ return -EINVAL;
+ }
+
+ dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n",
+ tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate),
+ twrph1, to_ns(twrph1, clkrate));
+
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ mask = (S3C2410_NFCONF_TACLS(3) |
+ S3C2410_NFCONF_TWRPH0(7) |
+ S3C2410_NFCONF_TWRPH1(7));
+ set = S3C2410_NFCONF_EN;
+ set |= S3C2410_NFCONF_TACLS(tacls - 1);
+ set |= S3C2410_NFCONF_TWRPH0(twrph0 - 1);
+ set |= S3C2410_NFCONF_TWRPH1(twrph1 - 1);
+ break;
+
+ case TYPE_S3C2440:
+ case TYPE_S3C2412:
+ mask = (S3C2440_NFCONF_TACLS(tacls_max - 1) |
+ S3C2440_NFCONF_TWRPH0(7) |
+ S3C2440_NFCONF_TWRPH1(7));
+
+ set = S3C2440_NFCONF_TACLS(tacls - 1);
+ set |= S3C2440_NFCONF_TWRPH0(twrph0 - 1);
+ set |= S3C2440_NFCONF_TWRPH1(twrph1 - 1);
+ break;
+
+ default:
+ BUG();
+ }
+
+ local_irq_save(flags);
+
+ cfg = readl(info->regs + S3C2410_NFCONF);
+ cfg &= ~mask;
+ cfg |= set;
+ writel(cfg, info->regs + S3C2410_NFCONF);
+
+ local_irq_restore(flags);
+
+ dev_dbg(info->device, "NF_CONF is 0x%lx\n", cfg);
+
+ return 0;
+}
+
+/**
+ * s3c2410_nand_inithw - basic hardware initialisation
+ * @info: The hardware state.
+ *
+ * Do the basic initialisation of the hardware, using s3c2410_nand_setrate()
+ * to setup the hardware access speeds and set the controller to be enabled.
+*/
+static int s3c2410_nand_inithw(struct s3c2410_nand_info *info)
+{
+ int ret;
+
+ ret = s3c2410_nand_setrate(info);
+ if (ret < 0)
+ return ret;
+
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ default:
+ break;
+
+ case TYPE_S3C2440:
+ case TYPE_S3C2412:
+ /* enable the controller and de-assert nFCE */
+
+ writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT);
+ }
+
+ return 0;
+}
+
+/**
+ * s3c2410_nand_select_chip - select the given nand chip
+ * @mtd: The MTD instance for this chip.
+ * @chip: The chip number.
+ *
+ * This is called by the MTD layer to either select a given chip for the
+ * @mtd instance, or to indicate that the access has finished and the
+ * chip can be de-selected.
+ *
+ * The routine ensures that the nFCE line is correctly setup, and any
+ * platform specific selection code is called to route nFCE to the specific
+ * chip.
+ */
+static void s3c2410_nand_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct s3c2410_nand_info *info;
+ struct s3c2410_nand_mtd *nmtd;
+ struct nand_chip *this = mtd->priv;
+ unsigned long cur;
+
+ nmtd = this->priv;
+ info = nmtd->info;
+
+ if (chip != -1)
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
+
+ cur = readl(info->sel_reg);
+
+ if (chip == -1) {
+ cur |= info->sel_bit;
+ } else {
+ if (nmtd->set != NULL && chip > nmtd->set->nr_chips) {
+ dev_err(info->device, "invalid chip %d\n", chip);
+ return;
+ }
+
+ if (info->platform != NULL) {
+ if (info->platform->select_chip != NULL)
+ (info->platform->select_chip) (nmtd->set, chip);
+ }
+
+ cur &= ~info->sel_bit;
+ }
+
+ writel(cur, info->sel_reg);
+
+ if (chip == -1)
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
+}
+
+/* s3c2410_nand_hwcontrol
+ *
+ * Issue command and address cycles to the chip
+*/
+
+static void s3c2410_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, info->regs + S3C2410_NFCMD);
+ else
+ writeb(cmd, info->regs + S3C2410_NFADDR);
+}
+
+/* command and control functions */
+
+static void s3c2440_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, info->regs + S3C2440_NFCMD);
+ else
+ writeb(cmd, info->regs + S3C2440_NFADDR);
+}
+
+/* s3c2410_nand_devready()
+ *
+ * returns 0 if the nand is busy, 1 if it is ready
+*/
+
+static int s3c2410_nand_devready(struct mtd_info *mtd)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ return readb(info->regs + S3C2410_NFSTAT) & S3C2410_NFSTAT_BUSY;
+}
+
+static int s3c2440_nand_devready(struct mtd_info *mtd)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ return readb(info->regs + S3C2440_NFSTAT) & S3C2440_NFSTAT_READY;
+}
+
+static int s3c2412_nand_devready(struct mtd_info *mtd)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ return readb(info->regs + S3C2412_NFSTAT) & S3C2412_NFSTAT_READY;
+}
+
+/* ECC handling functions */
+
+#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
+static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned int diff0, diff1, diff2;
+ unsigned int bit, byte;
+
+ pr_debug("%s(%p,%p,%p,%p)\n", __func__, mtd, dat, read_ecc, calc_ecc);
+
+ diff0 = read_ecc[0] ^ calc_ecc[0];
+ diff1 = read_ecc[1] ^ calc_ecc[1];
+ diff2 = read_ecc[2] ^ calc_ecc[2];
+
+ pr_debug("%s: rd %*phN calc %*phN diff %02x%02x%02x\n",
+ __func__, 3, read_ecc, 3, calc_ecc,
+ diff0, diff1, diff2);
+
+ if (diff0 == 0 && diff1 == 0 && diff2 == 0)
+ return 0; /* ECC is ok */
+
+ /* sometimes people do not think about using the ECC, so check
+ * to see if we have an 0xff,0xff,0xff read ECC and then ignore
+ * the error, on the assumption that this is an un-eccd page.
+ */
+ if (read_ecc[0] == 0xff && read_ecc[1] == 0xff && read_ecc[2] == 0xff
+ && info->platform->ignore_unset_ecc)
+ return 0;
+
+ /* Can we correct this ECC (ie, one row and column change).
+ * Note, this is similar to the 256 error code on smartmedia */
+
+ if (((diff0 ^ (diff0 >> 1)) & 0x55) == 0x55 &&
+ ((diff1 ^ (diff1 >> 1)) & 0x55) == 0x55 &&
+ ((diff2 ^ (diff2 >> 1)) & 0x55) == 0x55) {
+ /* calculate the bit position of the error */
+
+ bit = ((diff2 >> 3) & 1) |
+ ((diff2 >> 4) & 2) |
+ ((diff2 >> 5) & 4);
+
+ /* calculate the byte position of the error */
+
+ byte = ((diff2 << 7) & 0x100) |
+ ((diff1 << 0) & 0x80) |
+ ((diff1 << 1) & 0x40) |
+ ((diff1 << 2) & 0x20) |
+ ((diff1 << 3) & 0x10) |
+ ((diff0 >> 4) & 0x08) |
+ ((diff0 >> 3) & 0x04) |
+ ((diff0 >> 2) & 0x02) |
+ ((diff0 >> 1) & 0x01);
+
+ dev_dbg(info->device, "correcting error bit %d, byte %d\n",
+ bit, byte);
+
+ dat[byte] ^= (1 << bit);
+ return 1;
+ }
+
+ /* if there is only one bit difference in the ECC, then
+ * one of only a row or column parity has changed, which
+ * means the error is most probably in the ECC itself */
+
+ diff0 |= (diff1 << 8);
+ diff0 |= (diff2 << 16);
+
+ if ((diff0 & ~(1<<fls(diff0))) == 0)
+ return 1;
+
+ return -1;
+}
+
+/* ECC functions
+ *
+ * These allow the s3c2410 and s3c2440 to use the controller's ECC
+ * generator block to ECC the data as it passes through]
+*/
+
+static void s3c2410_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ctrl;
+
+ ctrl = readl(info->regs + S3C2410_NFCONF);
+ ctrl |= S3C2410_NFCONF_INITECC;
+ writel(ctrl, info->regs + S3C2410_NFCONF);
+}
+
+static void s3c2412_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ctrl;
+
+ ctrl = readl(info->regs + S3C2440_NFCONT);
+ writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC,
+ info->regs + S3C2440_NFCONT);
+}
+
+static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ctrl;
+
+ ctrl = readl(info->regs + S3C2440_NFCONT);
+ writel(ctrl | S3C2440_NFCONT_INITECC, info->regs + S3C2440_NFCONT);
+}
+
+static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+ ecc_code[0] = readb(info->regs + S3C2410_NFECC + 0);
+ ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1);
+ ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2);
+
+ pr_debug("%s: returning ecc %*phN\n", __func__, 3, ecc_code);
+
+ return 0;
+}
+
+static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ecc = readl(info->regs + S3C2412_NFMECC0);
+
+ ecc_code[0] = ecc;
+ ecc_code[1] = ecc >> 8;
+ ecc_code[2] = ecc >> 16;
+
+ pr_debug("%s: returning ecc %*phN\n", __func__, 3, ecc_code);
+
+ return 0;
+}
+
+static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ unsigned long ecc = readl(info->regs + S3C2440_NFMECC0);
+
+ ecc_code[0] = ecc;
+ ecc_code[1] = ecc >> 8;
+ ecc_code[2] = ecc >> 16;
+
+ pr_debug("%s: returning ecc %06lx\n", __func__, ecc & 0xffffff);
+
+ return 0;
+}
+#endif
+
+/* over-ride the standard functions for a little more speed. We can
+ * use read/write block to move the data buffers to/from the controller
+*/
+
+static void s3c2410_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct nand_chip *this = mtd->priv;
+ readsb(this->IO_ADDR_R, buf, len);
+}
+
+static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+ readsl(info->regs + S3C2440_NFDATA, buf, len >> 2);
+
+ /* cleanup if we've got less than a word to do */
+ if (len & 3) {
+ buf += len & ~3;
+
+ for (; len & 3; len--)
+ *buf++ = readb(info->regs + S3C2440_NFDATA);
+ }
+}
+
+static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf,
+ int len)
+{
+ struct nand_chip *this = mtd->priv;
+ writesb(this->IO_ADDR_W, buf, len);
+}
+
+static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf,
+ int len)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+
+ writesl(info->regs + S3C2440_NFDATA, buf, len >> 2);
+
+ /* cleanup any fractional write */
+ if (len & 3) {
+ buf += len & ~3;
+
+ for (; len & 3; len--, buf++)
+ writeb(*buf, info->regs + S3C2440_NFDATA);
+ }
+}
+
+/* cpufreq driver support */
+
+#ifdef CONFIG_CPU_FREQ
+
+static int s3c2410_nand_cpufreq_transition(struct notifier_block *nb,
+ unsigned long val, void *data)
+{
+ struct s3c2410_nand_info *info;
+ unsigned long newclk;
+
+ info = container_of(nb, struct s3c2410_nand_info, freq_transition);
+ newclk = clk_get_rate(info->clk);
+
+ if ((val == CPUFREQ_POSTCHANGE && newclk < info->clk_rate) ||
+ (val == CPUFREQ_PRECHANGE && newclk > info->clk_rate)) {
+ s3c2410_nand_setrate(info);
+ }
+
+ return 0;
+}
+
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+ info->freq_transition.notifier_call = s3c2410_nand_cpufreq_transition;
+
+ return cpufreq_register_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+static inline void
+s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+ cpufreq_unregister_notifier(&info->freq_transition,
+ CPUFREQ_TRANSITION_NOTIFIER);
+}
+
+#else
+static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info)
+{
+ return 0;
+}
+
+static inline void
+s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info)
+{
+}
+#endif
+
+/* device management functions */
+
+static int s3c24xx_nand_remove(struct platform_device *pdev)
+{
+ struct s3c2410_nand_info *info = to_nand_info(pdev);
+
+ if (info == NULL)
+ return 0;
+
+ s3c2410_nand_cpufreq_deregister(info);
+
+ /* Release all our mtds and their partitions, then go through
+ * freeing the resources used
+ */
+
+ if (info->mtds != NULL) {
+ struct s3c2410_nand_mtd *ptr = info->mtds;
+ int mtdno;
+
+ for (mtdno = 0; mtdno < info->mtd_count; mtdno++, ptr++) {
+ pr_debug("releasing mtd %d (%p)\n", mtdno, ptr);
+ nand_release(&ptr->mtd);
+ }
+ }
+
+ /* free the common resources */
+
+ if (!IS_ERR(info->clk))
+ s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
+
+ return 0;
+}
+
+static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
+ struct s3c2410_nand_mtd *mtd,
+ struct s3c2410_nand_set *set)
+{
+ if (set) {
+ mtd->mtd.name = set->name;
+
+ return mtd_device_parse_register(&mtd->mtd, NULL, NULL,
+ set->partitions, set->nr_partitions);
+ }
+
+ return -ENODEV;
+}
+
+/**
+ * s3c2410_nand_init_chip - initialise a single instance of an chip
+ * @info: The base NAND controller the chip is on.
+ * @nmtd: The new controller MTD instance to fill in.
+ * @set: The information passed from the board specific platform data.
+ *
+ * Initialise the given @nmtd from the information in @info and @set. This
+ * readies the structure for use with the MTD layer functions by ensuring
+ * all pointers are setup and the necessary control routines selected.
+ */
+static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
+ struct s3c2410_nand_mtd *nmtd,
+ struct s3c2410_nand_set *set)
+{
+ struct nand_chip *chip = &nmtd->chip;
+ void __iomem *regs = info->regs;
+
+ chip->write_buf = s3c2410_nand_write_buf;
+ chip->read_buf = s3c2410_nand_read_buf;
+ chip->select_chip = s3c2410_nand_select_chip;
+ chip->chip_delay = 50;
+ chip->priv = nmtd;
+ chip->options = set->options;
+ chip->controller = &info->controller;
+
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ chip->IO_ADDR_W = regs + S3C2410_NFDATA;
+ info->sel_reg = regs + S3C2410_NFCONF;
+ info->sel_bit = S3C2410_NFCONF_nFCE;
+ chip->cmd_ctrl = s3c2410_nand_hwcontrol;
+ chip->dev_ready = s3c2410_nand_devready;
+ break;
+
+ case TYPE_S3C2440:
+ chip->IO_ADDR_W = regs + S3C2440_NFDATA;
+ info->sel_reg = regs + S3C2440_NFCONT;
+ info->sel_bit = S3C2440_NFCONT_nFCE;
+ chip->cmd_ctrl = s3c2440_nand_hwcontrol;
+ chip->dev_ready = s3c2440_nand_devready;
+ chip->read_buf = s3c2440_nand_read_buf;
+ chip->write_buf = s3c2440_nand_write_buf;
+ break;
+
+ case TYPE_S3C2412:
+ chip->IO_ADDR_W = regs + S3C2440_NFDATA;
+ info->sel_reg = regs + S3C2440_NFCONT;
+ info->sel_bit = S3C2412_NFCONT_nFCE0;
+ chip->cmd_ctrl = s3c2440_nand_hwcontrol;
+ chip->dev_ready = s3c2412_nand_devready;
+
+ if (readl(regs + S3C2410_NFCONF) & S3C2412_NFCONF_NANDBOOT)
+ dev_info(info->device, "System booted from NAND\n");
+
+ break;
+ }
+
+ chip->IO_ADDR_R = chip->IO_ADDR_W;
+
+ nmtd->info = info;
+ nmtd->mtd.priv = chip;
+ nmtd->set = set;
+
+#ifdef CONFIG_MTD_NAND_S3C2410_HWECC
+ chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ chip->ecc.correct = s3c2410_nand_correct_data;
+ chip->ecc.mode = NAND_ECC_HW;
+ chip->ecc.strength = 1;
+
+ switch (info->cpu_type) {
+ case TYPE_S3C2410:
+ chip->ecc.hwctl = s3c2410_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2410_nand_calculate_ecc;
+ break;
+
+ case TYPE_S3C2412:
+ chip->ecc.hwctl = s3c2412_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2412_nand_calculate_ecc;
+ break;
+
+ case TYPE_S3C2440:
+ chip->ecc.hwctl = s3c2440_nand_enable_hwecc;
+ chip->ecc.calculate = s3c2440_nand_calculate_ecc;
+ break;
+ }
+#else
+ chip->ecc.mode = NAND_ECC_SOFT;
+#endif
+
+ if (set->ecc_layout != NULL)
+ chip->ecc.layout = set->ecc_layout;
+
+ if (set->disable_ecc)
+ chip->ecc.mode = NAND_ECC_NONE;
+
+ switch (chip->ecc.mode) {
+ case NAND_ECC_NONE:
+ dev_info(info->device, "NAND ECC disabled\n");
+ break;
+ case NAND_ECC_SOFT:
+ dev_info(info->device, "NAND soft ECC\n");
+ break;
+ case NAND_ECC_HW:
+ dev_info(info->device, "NAND hardware ECC\n");
+ break;
+ default:
+ dev_info(info->device, "NAND ECC UNKNOWN\n");
+ break;
+ }
+
+ /* If you use u-boot BBT creation code, specifying this flag will
+ * let the kernel fish out the BBT from the NAND, and also skip the
+ * full NAND scan that can take 1/2s or so. Little things... */
+ if (set->flash_bbt) {
+ chip->bbt_options |= NAND_BBT_USE_FLASH;
+ chip->options |= NAND_SKIP_BBTSCAN;
+ }
+}
+
+/**
+ * s3c2410_nand_update_chip - post probe update
+ * @info: The controller instance.
+ * @nmtd: The driver version of the MTD instance.
+ *
+ * This routine is called after the chip probe has successfully completed
+ * and the relevant per-chip information updated. This call ensure that
+ * we update the internal state accordingly.
+ *
+ * The internal state is currently limited to the ECC state information.
+*/
+static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
+ struct s3c2410_nand_mtd *nmtd)
+{
+ struct nand_chip *chip = &nmtd->chip;
+
+ dev_dbg(info->device, "chip %p => page shift %d\n",
+ chip, chip->page_shift);
+
+ if (chip->ecc.mode != NAND_ECC_HW)
+ return;
+
+ /* change the behaviour depending on whether we are using
+ * the large or small page nand device */
+
+ if (chip->page_shift > 10) {
+ chip->ecc.size = 256;
+ chip->ecc.bytes = 3;
+ } else {
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 3;
+ chip->ecc.layout = &nand_hw_eccoob;
+ }
+}
+
+/* s3c24xx_nand_probe
+ *
+ * called by device layer when it finds a device matching
+ * one our driver can handled. This code checks to see if
+ * it can allocate all necessary resources then calls the
+ * nand layer to look for devices
+*/
+static int s3c24xx_nand_probe(struct platform_device *pdev)
+{
+ struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
+ enum s3c_cpu_type cpu_type;
+ struct s3c2410_nand_info *info;
+ struct s3c2410_nand_mtd *nmtd;
+ struct s3c2410_nand_set *sets;
+ struct resource *res;
+ int err = 0;
+ int size;
+ int nr_sets;
+ int setno;
+
+ cpu_type = platform_get_device_id(pdev)->driver_data;
+
+ info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
+ if (info == NULL) {
+ err = -ENOMEM;
+ goto exit_error;
+ }
+
+ platform_set_drvdata(pdev, info);
+
+ spin_lock_init(&info->controller.lock);
+ init_waitqueue_head(&info->controller.wq);
+
+ /* get the clock source and enable it */
+
+ info->clk = devm_clk_get(&pdev->dev, "nand");
+ if (IS_ERR(info->clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ err = -ENOENT;
+ goto exit_error;
+ }
+
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
+
+ /* allocate and map the resource */
+
+ /* currently we assume we have the one resource */
+ res = pdev->resource;
+ size = resource_size(res);
+
+ info->device = &pdev->dev;
+ info->platform = plat;
+ info->cpu_type = cpu_type;
+
+ info->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(info->regs)) {
+ err = PTR_ERR(info->regs);
+ goto exit_error;
+ }
+
+ dev_dbg(&pdev->dev, "mapped registers at %p\n", info->regs);
+
+ /* initialise the hardware */
+
+ err = s3c2410_nand_inithw(info);
+ if (err != 0)
+ goto exit_error;
+
+ sets = (plat != NULL) ? plat->sets : NULL;
+ nr_sets = (plat != NULL) ? plat->nr_sets : 1;
+
+ info->mtd_count = nr_sets;
+
+ /* allocate our information */
+
+ size = nr_sets * sizeof(*info->mtds);
+ info->mtds = devm_kzalloc(&pdev->dev, size, GFP_KERNEL);
+ if (info->mtds == NULL) {
+ err = -ENOMEM;
+ goto exit_error;
+ }
+
+ /* initialise all possible chips */
+
+ nmtd = info->mtds;
+
+ for (setno = 0; setno < nr_sets; setno++, nmtd++) {
+ pr_debug("initialising set %d (%p, info %p)\n",
+ setno, nmtd, info);
+
+ nmtd->mtd.dev.parent = &pdev->dev;
+ s3c2410_nand_init_chip(info, nmtd, sets);
+
+ nmtd->scan_res = nand_scan_ident(&nmtd->mtd,
+ (sets) ? sets->nr_chips : 1,
+ NULL);
+
+ if (nmtd->scan_res == 0) {
+ s3c2410_nand_update_chip(info, nmtd);
+ nand_scan_tail(&nmtd->mtd);
+ s3c2410_nand_add_partition(info, nmtd, sets);
+ }
+
+ if (sets != NULL)
+ sets++;
+ }
+
+ err = s3c2410_nand_cpufreq_register(info);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to init cpufreq support\n");
+ goto exit_error;
+ }
+
+ if (allow_clk_suspend(info)) {
+ dev_info(&pdev->dev, "clock idle support enabled\n");
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
+ }
+
+ return 0;
+
+ exit_error:
+ s3c24xx_nand_remove(pdev);
+
+ if (err == 0)
+ err = -EINVAL;
+ return err;
+}
+
+/* PM Support */
+#ifdef CONFIG_PM
+
+static int s3c24xx_nand_suspend(struct platform_device *dev, pm_message_t pm)
+{
+ struct s3c2410_nand_info *info = platform_get_drvdata(dev);
+
+ if (info) {
+ info->save_sel = readl(info->sel_reg);
+
+ /* For the moment, we must ensure nFCE is high during
+ * the time we are suspended. This really should be
+ * handled by suspending the MTDs we are using, but
+ * that is currently not the case. */
+
+ writel(info->save_sel | info->sel_bit, info->sel_reg);
+
+ s3c2410_nand_clk_set_state(info, CLOCK_DISABLE);
+ }
+
+ return 0;
+}
+
+static int s3c24xx_nand_resume(struct platform_device *dev)
+{
+ struct s3c2410_nand_info *info = platform_get_drvdata(dev);
+ unsigned long sel;
+
+ if (info) {
+ s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
+ s3c2410_nand_inithw(info);
+
+ /* Restore the state of the nFCE line. */
+
+ sel = readl(info->sel_reg);
+ sel &= ~info->sel_bit;
+ sel |= info->save_sel & info->sel_bit;
+ writel(sel, info->sel_reg);
+
+ s3c2410_nand_clk_set_state(info, CLOCK_SUSPEND);
+ }
+
+ return 0;
+}
+
+#else
+#define s3c24xx_nand_suspend NULL
+#define s3c24xx_nand_resume NULL
+#endif
+
+/* driver device registration */
+
+static const struct platform_device_id s3c24xx_driver_ids[] = {
+ {
+ .name = "s3c2410-nand",
+ .driver_data = TYPE_S3C2410,
+ }, {
+ .name = "s3c2440-nand",
+ .driver_data = TYPE_S3C2440,
+ }, {
+ .name = "s3c2412-nand",
+ .driver_data = TYPE_S3C2412,
+ }, {
+ .name = "s3c6400-nand",
+ .driver_data = TYPE_S3C2412, /* compatible with 2412 */
+ },
+ { }
+};
+
+MODULE_DEVICE_TABLE(platform, s3c24xx_driver_ids);
+
+static struct platform_driver s3c24xx_nand_driver = {
+ .probe = s3c24xx_nand_probe,
+ .remove = s3c24xx_nand_remove,
+ .suspend = s3c24xx_nand_suspend,
+ .resume = s3c24xx_nand_resume,
+ .id_table = s3c24xx_driver_ids,
+ .driver = {
+ .name = "s3c24xx-nand",
+ },
+};
+
+module_platform_driver(s3c24xx_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>");
+MODULE_DESCRIPTION("S3C24XX MTD NAND driver");
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
new file mode 100644
index 0000000..bcba1a9
--- /dev/null
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -0,0 +1,1202 @@
+/*
+ * SuperH FLCTL nand controller
+ *
+ * Copyright (c) 2008 Renesas Solutions Corp.
+ * Copyright (c) 2008 Atom Create Engineering Co., Ltd.
+ *
+ * Based on fsl_elbc_nand.c, Copyright (c) 2006-2007 Freescale Semiconductor
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_mtd.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/sh_dma.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/sh_flctl.h>
+
+static struct nand_ecclayout flctl_4secc_oob_16 = {
+ .eccbytes = 10,
+ .eccpos = {0, 1, 2, 3, 4, 5, 6, 7, 8, 9},
+ .oobfree = {
+ {.offset = 12,
+ . length = 4} },
+};
+
+static struct nand_ecclayout flctl_4secc_oob_64 = {
+ .eccbytes = 4 * 10,
+ .eccpos = {
+ 6, 7, 8, 9, 10, 11, 12, 13, 14, 15,
+ 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+ 38, 39, 40, 41, 42, 43, 44, 45, 46, 47,
+ 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 },
+ .oobfree = {
+ {.offset = 2, .length = 4},
+ {.offset = 16, .length = 6},
+ {.offset = 32, .length = 6},
+ {.offset = 48, .length = 6} },
+};
+
+static uint8_t scan_ff_pattern[] = { 0xff, 0xff };
+
+static struct nand_bbt_descr flctl_4secc_smallpage = {
+ .options = NAND_BBT_SCAN2NDPAGE,
+ .offs = 11,
+ .len = 1,
+ .pattern = scan_ff_pattern,
+};
+
+static struct nand_bbt_descr flctl_4secc_largepage = {
+ .options = NAND_BBT_SCAN2NDPAGE,
+ .offs = 0,
+ .len = 2,
+ .pattern = scan_ff_pattern,
+};
+
+static void empty_fifo(struct sh_flctl *flctl)
+{
+ writel(flctl->flintdmacr_base | AC1CLR | AC0CLR, FLINTDMACR(flctl));
+ writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
+}
+
+static void start_translation(struct sh_flctl *flctl)
+{
+ writeb(TRSTRT, FLTRCR(flctl));
+}
+
+static void timeout_error(struct sh_flctl *flctl, const char *str)
+{
+ dev_err(&flctl->pdev->dev, "Timeout occurred in %s\n", str);
+}
+
+static void wait_completion(struct sh_flctl *flctl)
+{
+ uint32_t timeout = LOOP_TIMEOUT_MAX;
+
+ while (timeout--) {
+ if (readb(FLTRCR(flctl)) & TREND) {
+ writeb(0x0, FLTRCR(flctl));
+ return;
+ }
+ udelay(1);
+ }
+
+ timeout_error(flctl, __func__);
+ writeb(0x0, FLTRCR(flctl));
+}
+
+static void flctl_dma_complete(void *param)
+{
+ struct sh_flctl *flctl = param;
+
+ complete(&flctl->dma_complete);
+}
+
+static void flctl_release_dma(struct sh_flctl *flctl)
+{
+ if (flctl->chan_fifo0_rx) {
+ dma_release_channel(flctl->chan_fifo0_rx);
+ flctl->chan_fifo0_rx = NULL;
+ }
+ if (flctl->chan_fifo0_tx) {
+ dma_release_channel(flctl->chan_fifo0_tx);
+ flctl->chan_fifo0_tx = NULL;
+ }
+}
+
+static void flctl_setup_dma(struct sh_flctl *flctl)
+{
+ dma_cap_mask_t mask;
+ struct dma_slave_config cfg;
+ struct platform_device *pdev = flctl->pdev;
+ struct sh_flctl_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ int ret;
+
+ if (!pdata)
+ return;
+
+ if (pdata->slave_id_fifo0_tx <= 0 || pdata->slave_id_fifo0_rx <= 0)
+ return;
+
+ /* We can only either use DMA for both Tx and Rx or not use it at all */
+ dma_cap_zero(mask);
+ dma_cap_set(DMA_SLAVE, mask);
+
+ flctl->chan_fifo0_tx = dma_request_channel(mask, shdma_chan_filter,
+ (void *)(uintptr_t)pdata->slave_id_fifo0_tx);
+ dev_dbg(&pdev->dev, "%s: TX: got channel %p\n", __func__,
+ flctl->chan_fifo0_tx);
+
+ if (!flctl->chan_fifo0_tx)
+ return;
+
+ memset(&cfg, 0, sizeof(cfg));
+ cfg.direction = DMA_MEM_TO_DEV;
+ cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl);
+ cfg.src_addr = 0;
+ ret = dmaengine_slave_config(flctl->chan_fifo0_tx, &cfg);
+ if (ret < 0)
+ goto err;
+
+ flctl->chan_fifo0_rx = dma_request_channel(mask, shdma_chan_filter,
+ (void *)(uintptr_t)pdata->slave_id_fifo0_rx);
+ dev_dbg(&pdev->dev, "%s: RX: got channel %p\n", __func__,
+ flctl->chan_fifo0_rx);
+
+ if (!flctl->chan_fifo0_rx)
+ goto err;
+
+ cfg.direction = DMA_DEV_TO_MEM;
+ cfg.dst_addr = 0;
+ cfg.src_addr = (dma_addr_t)FLDTFIFO(flctl);
+ ret = dmaengine_slave_config(flctl->chan_fifo0_rx, &cfg);
+ if (ret < 0)
+ goto err;
+
+ init_completion(&flctl->dma_complete);
+
+ return;
+
+err:
+ flctl_release_dma(flctl);
+}
+
+static void set_addr(struct mtd_info *mtd, int column, int page_addr)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ uint32_t addr = 0;
+
+ if (column == -1) {
+ addr = page_addr; /* ERASE1 */
+ } else if (page_addr != -1) {
+ /* SEQIN, READ0, etc.. */
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ column >>= 1;
+ if (flctl->page_size) {
+ addr = column & 0x0FFF;
+ addr |= (page_addr & 0xff) << 16;
+ addr |= ((page_addr >> 8) & 0xff) << 24;
+ /* big than 128MB */
+ if (flctl->rw_ADRCNT == ADRCNT2_E) {
+ uint32_t addr2;
+ addr2 = (page_addr >> 16) & 0xff;
+ writel(addr2, FLADR2(flctl));
+ }
+ } else {
+ addr = column;
+ addr |= (page_addr & 0xff) << 8;
+ addr |= ((page_addr >> 8) & 0xff) << 16;
+ addr |= ((page_addr >> 16) & 0xff) << 24;
+ }
+ }
+ writel(addr, FLADR(flctl));
+}
+
+static void wait_rfifo_ready(struct sh_flctl *flctl)
+{
+ uint32_t timeout = LOOP_TIMEOUT_MAX;
+
+ while (timeout--) {
+ uint32_t val;
+ /* check FIFO */
+ val = readl(FLDTCNTR(flctl)) >> 16;
+ if (val & 0xFF)
+ return;
+ udelay(1);
+ }
+ timeout_error(flctl, __func__);
+}
+
+static void wait_wfifo_ready(struct sh_flctl *flctl)
+{
+ uint32_t len, timeout = LOOP_TIMEOUT_MAX;
+
+ while (timeout--) {
+ /* check FIFO */
+ len = (readl(FLDTCNTR(flctl)) >> 16) & 0xFF;
+ if (len >= 4)
+ return;
+ udelay(1);
+ }
+ timeout_error(flctl, __func__);
+}
+
+static enum flctl_ecc_res_t wait_recfifo_ready
+ (struct sh_flctl *flctl, int sector_number)
+{
+ uint32_t timeout = LOOP_TIMEOUT_MAX;
+ void __iomem *ecc_reg[4];
+ int i;
+ int state = FL_SUCCESS;
+ uint32_t data, size;
+
+ /*
+ * First this loops checks in FLDTCNTR if we are ready to read out the
+ * oob data. This is the case if either all went fine without errors or
+ * if the bottom part of the loop corrected the errors or marked them as
+ * uncorrectable and the controller is given time to push the data into
+ * the FIFO.
+ */
+ while (timeout--) {
+ /* check if all is ok and we can read out the OOB */
+ size = readl(FLDTCNTR(flctl)) >> 24;
+ if ((size & 0xFF) == 4)
+ return state;
+
+ /* check if a correction code has been calculated */
+ if (!(readl(FL4ECCCR(flctl)) & _4ECCEND)) {
+ /*
+ * either we wait for the fifo to be filled or a
+ * correction pattern is being generated
+ */
+ udelay(1);
+ continue;
+ }
+
+ /* check for an uncorrectable error */
+ if (readl(FL4ECCCR(flctl)) & _4ECCFA) {
+ /* check if we face a non-empty page */
+ for (i = 0; i < 512; i++) {
+ if (flctl->done_buff[i] != 0xff) {
+ state = FL_ERROR; /* can't correct */
+ break;
+ }
+ }
+
+ if (state == FL_SUCCESS)
+ dev_dbg(&flctl->pdev->dev,
+ "reading empty sector %d, ecc error ignored\n",
+ sector_number);
+
+ writel(0, FL4ECCCR(flctl));
+ continue;
+ }
+
+ /* start error correction */
+ ecc_reg[0] = FL4ECCRESULT0(flctl);
+ ecc_reg[1] = FL4ECCRESULT1(flctl);
+ ecc_reg[2] = FL4ECCRESULT2(flctl);
+ ecc_reg[3] = FL4ECCRESULT3(flctl);
+
+ for (i = 0; i < 3; i++) {
+ uint8_t org;
+ unsigned int index;
+
+ data = readl(ecc_reg[i]);
+
+ if (flctl->page_size)
+ index = (512 * sector_number) +
+ (data >> 16);
+ else
+ index = data >> 16;
+
+ org = flctl->done_buff[index];
+ flctl->done_buff[index] = org ^ (data & 0xFF);
+ }
+ state = FL_REPAIRABLE;
+ writel(0, FL4ECCCR(flctl));
+ }
+
+ timeout_error(flctl, __func__);
+ return FL_TIMEOUT; /* timeout */
+}
+
+static void wait_wecfifo_ready(struct sh_flctl *flctl)
+{
+ uint32_t timeout = LOOP_TIMEOUT_MAX;
+ uint32_t len;
+
+ while (timeout--) {
+ /* check FLECFIFO */
+ len = (readl(FLDTCNTR(flctl)) >> 24) & 0xFF;
+ if (len >= 4)
+ return;
+ udelay(1);
+ }
+ timeout_error(flctl, __func__);
+}
+
+static int flctl_dma_fifo0_transfer(struct sh_flctl *flctl, unsigned long *buf,
+ int len, enum dma_data_direction dir)
+{
+ struct dma_async_tx_descriptor *desc = NULL;
+ struct dma_chan *chan;
+ enum dma_transfer_direction tr_dir;
+ dma_addr_t dma_addr;
+ dma_cookie_t cookie = -EINVAL;
+ uint32_t reg;
+ int ret;
+
+ if (dir == DMA_FROM_DEVICE) {
+ chan = flctl->chan_fifo0_rx;
+ tr_dir = DMA_DEV_TO_MEM;
+ } else {
+ chan = flctl->chan_fifo0_tx;
+ tr_dir = DMA_MEM_TO_DEV;
+ }
+
+ dma_addr = dma_map_single(chan->device->dev, buf, len, dir);
+
+ if (dma_addr)
+ desc = dmaengine_prep_slave_single(chan, dma_addr, len,
+ tr_dir, DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
+
+ if (desc) {
+ reg = readl(FLINTDMACR(flctl));
+ reg |= DREQ0EN;
+ writel(reg, FLINTDMACR(flctl));
+
+ desc->callback = flctl_dma_complete;
+ desc->callback_param = flctl;
+ cookie = dmaengine_submit(desc);
+
+ dma_async_issue_pending(chan);
+ } else {
+ /* DMA failed, fall back to PIO */
+ flctl_release_dma(flctl);
+ dev_warn(&flctl->pdev->dev,
+ "DMA failed, falling back to PIO\n");
+ ret = -EIO;
+ goto out;
+ }
+
+ ret =
+ wait_for_completion_timeout(&flctl->dma_complete,
+ msecs_to_jiffies(3000));
+
+ if (ret <= 0) {
+ dmaengine_terminate_all(chan);
+ dev_err(&flctl->pdev->dev, "wait_for_completion_timeout\n");
+ }
+
+out:
+ reg = readl(FLINTDMACR(flctl));
+ reg &= ~DREQ0EN;
+ writel(reg, FLINTDMACR(flctl));
+
+ dma_unmap_single(chan->device->dev, dma_addr, len, dir);
+
+ /* ret > 0 is success */
+ return ret;
+}
+
+static void read_datareg(struct sh_flctl *flctl, int offset)
+{
+ unsigned long data;
+ unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
+
+ wait_completion(flctl);
+
+ data = readl(FLDATAR(flctl));
+ *buf = le32_to_cpu(data);
+}
+
+static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset)
+{
+ int i, len_4align;
+ unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
+
+ len_4align = (rlen + 3) / 4;
+
+ /* initiate DMA transfer */
+ if (flctl->chan_fifo0_rx && rlen >= 32 &&
+ flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_DEV_TO_MEM) > 0)
+ goto convert; /* DMA success */
+
+ /* do polling transfer */
+ for (i = 0; i < len_4align; i++) {
+ wait_rfifo_ready(flctl);
+ buf[i] = readl(FLDTFIFO(flctl));
+ }
+
+convert:
+ for (i = 0; i < len_4align; i++)
+ buf[i] = be32_to_cpu(buf[i]);
+}
+
+static enum flctl_ecc_res_t read_ecfiforeg
+ (struct sh_flctl *flctl, uint8_t *buff, int sector)
+{
+ int i;
+ enum flctl_ecc_res_t res;
+ unsigned long *ecc_buf = (unsigned long *)buff;
+
+ res = wait_recfifo_ready(flctl , sector);
+
+ if (res != FL_ERROR) {
+ for (i = 0; i < 4; i++) {
+ ecc_buf[i] = readl(FLECFIFO(flctl));
+ ecc_buf[i] = be32_to_cpu(ecc_buf[i]);
+ }
+ }
+
+ return res;
+}
+
+static void write_fiforeg(struct sh_flctl *flctl, int rlen,
+ unsigned int offset)
+{
+ int i, len_4align;
+ unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
+
+ len_4align = (rlen + 3) / 4;
+ for (i = 0; i < len_4align; i++) {
+ wait_wfifo_ready(flctl);
+ writel(cpu_to_be32(buf[i]), FLDTFIFO(flctl));
+ }
+}
+
+static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen,
+ unsigned int offset)
+{
+ int i, len_4align;
+ unsigned long *buf = (unsigned long *)&flctl->done_buff[offset];
+
+ len_4align = (rlen + 3) / 4;
+
+ for (i = 0; i < len_4align; i++)
+ buf[i] = cpu_to_be32(buf[i]);
+
+ /* initiate DMA transfer */
+ if (flctl->chan_fifo0_tx && rlen >= 32 &&
+ flctl_dma_fifo0_transfer(flctl, buf, rlen, DMA_MEM_TO_DEV) > 0)
+ return; /* DMA success */
+
+ /* do polling transfer */
+ for (i = 0; i < len_4align; i++) {
+ wait_wecfifo_ready(flctl);
+ writel(buf[i], FLECFIFO(flctl));
+ }
+}
+
+static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ uint32_t flcmncr_val = flctl->flcmncr_base & ~SEL_16BIT;
+ uint32_t flcmdcr_val, addr_len_bytes = 0;
+
+ /* Set SNAND bit if page size is 2048byte */
+ if (flctl->page_size)
+ flcmncr_val |= SNAND_E;
+ else
+ flcmncr_val &= ~SNAND_E;
+
+ /* default FLCMDCR val */
+ flcmdcr_val = DOCMD1_E | DOADR_E;
+
+ /* Set for FLCMDCR */
+ switch (cmd) {
+ case NAND_CMD_ERASE1:
+ addr_len_bytes = flctl->erase_ADRCNT;
+ flcmdcr_val |= DOCMD2_E;
+ break;
+ case NAND_CMD_READ0:
+ case NAND_CMD_READOOB:
+ case NAND_CMD_RNDOUT:
+ addr_len_bytes = flctl->rw_ADRCNT;
+ flcmdcr_val |= CDSRC_E;
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ flcmncr_val |= SEL_16BIT;
+ break;
+ case NAND_CMD_SEQIN:
+ /* This case is that cmd is READ0 or READ1 or READ00 */
+ flcmdcr_val &= ~DOADR_E; /* ONLY execute 1st cmd */
+ break;
+ case NAND_CMD_PAGEPROG:
+ addr_len_bytes = flctl->rw_ADRCNT;
+ flcmdcr_val |= DOCMD2_E | CDSRC_E | SELRW;
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ flcmncr_val |= SEL_16BIT;
+ break;
+ case NAND_CMD_READID:
+ flcmncr_val &= ~SNAND_E;
+ flcmdcr_val |= CDSRC_E;
+ addr_len_bytes = ADRCNT_1;
+ break;
+ case NAND_CMD_STATUS:
+ case NAND_CMD_RESET:
+ flcmncr_val &= ~SNAND_E;
+ flcmdcr_val &= ~(DOADR_E | DOSR_E);
+ break;
+ default:
+ break;
+ }
+
+ /* Set address bytes parameter */
+ flcmdcr_val |= addr_len_bytes;
+
+ /* Now actually write */
+ writel(flcmncr_val, FLCMNCR(flctl));
+ writel(flcmdcr_val, FLCMDCR(flctl));
+ writel(flcmcdr_val, FLCMCDR(flctl));
+}
+
+static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ chip->read_buf(mtd, buf, mtd->writesize);
+ if (oob_required)
+ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+static int flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ chip->write_buf(mtd, buf, mtd->writesize);
+ chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
+ return 0;
+}
+
+static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ int sector, page_sectors;
+ enum flctl_ecc_res_t ecc_result;
+
+ page_sectors = flctl->page_size ? 4 : 1;
+
+ set_cmd_regs(mtd, NAND_CMD_READ0,
+ (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
+
+ writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
+ FLCMNCR(flctl));
+ writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+ writel(page_addr << 2, FLADR(flctl));
+
+ empty_fifo(flctl);
+ start_translation(flctl);
+
+ for (sector = 0; sector < page_sectors; sector++) {
+ read_fiforeg(flctl, 512, 512 * sector);
+
+ ecc_result = read_ecfiforeg(flctl,
+ &flctl->done_buff[mtd->writesize + 16 * sector],
+ sector);
+
+ switch (ecc_result) {
+ case FL_REPAIRABLE:
+ dev_info(&flctl->pdev->dev,
+ "applied ecc on page 0x%x", page_addr);
+ flctl->mtd.ecc_stats.corrected++;
+ break;
+ case FL_ERROR:
+ dev_warn(&flctl->pdev->dev,
+ "page 0x%x contains corrupted data\n",
+ page_addr);
+ flctl->mtd.ecc_stats.failed++;
+ break;
+ default:
+ ;
+ }
+ }
+
+ wait_completion(flctl);
+
+ writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
+ FLCMNCR(flctl));
+}
+
+static void execmd_read_oob(struct mtd_info *mtd, int page_addr)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ int page_sectors = flctl->page_size ? 4 : 1;
+ int i;
+
+ set_cmd_regs(mtd, NAND_CMD_READ0,
+ (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
+
+ empty_fifo(flctl);
+
+ for (i = 0; i < page_sectors; i++) {
+ set_addr(mtd, (512 + 16) * i + 512 , page_addr);
+ writel(16, FLDTCNTR(flctl));
+
+ start_translation(flctl);
+ read_fiforeg(flctl, 16, 16 * i);
+ wait_completion(flctl);
+ }
+}
+
+static void execmd_write_page_sector(struct mtd_info *mtd)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ int page_addr = flctl->seqin_page_addr;
+ int sector, page_sectors;
+
+ page_sectors = flctl->page_size ? 4 : 1;
+
+ set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
+ (NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
+
+ empty_fifo(flctl);
+ writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+ writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+ writel(page_addr << 2, FLADR(flctl));
+ start_translation(flctl);
+
+ for (sector = 0; sector < page_sectors; sector++) {
+ write_fiforeg(flctl, 512, 512 * sector);
+ write_ec_fiforeg(flctl, 16, mtd->writesize + 16 * sector);
+ }
+
+ wait_completion(flctl);
+ writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
+}
+
+static void execmd_write_oob(struct mtd_info *mtd)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ int page_addr = flctl->seqin_page_addr;
+ int sector, page_sectors;
+
+ page_sectors = flctl->page_size ? 4 : 1;
+
+ set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
+ (NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
+
+ for (sector = 0; sector < page_sectors; sector++) {
+ empty_fifo(flctl);
+ set_addr(mtd, sector * 528 + 512, page_addr);
+ writel(16, FLDTCNTR(flctl)); /* set read size */
+
+ start_translation(flctl);
+ write_fiforeg(flctl, 16, 16 * sector);
+ wait_completion(flctl);
+ }
+}
+
+static void flctl_cmdfunc(struct mtd_info *mtd, unsigned int command,
+ int column, int page_addr)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ uint32_t read_cmd = 0;
+
+ pm_runtime_get_sync(&flctl->pdev->dev);
+
+ flctl->read_bytes = 0;
+ if (command != NAND_CMD_PAGEPROG)
+ flctl->index = 0;
+
+ switch (command) {
+ case NAND_CMD_READ1:
+ case NAND_CMD_READ0:
+ if (flctl->hwecc) {
+ /* read page with hwecc */
+ execmd_read_page_sector(mtd, page_addr);
+ break;
+ }
+ if (flctl->page_size)
+ set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
+ | command);
+ else
+ set_cmd_regs(mtd, command, command);
+
+ set_addr(mtd, 0, page_addr);
+
+ flctl->read_bytes = mtd->writesize + mtd->oobsize;
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ column >>= 1;
+ flctl->index += column;
+ goto read_normal_exit;
+
+ case NAND_CMD_READOOB:
+ if (flctl->hwecc) {
+ /* read page with hwecc */
+ execmd_read_oob(mtd, page_addr);
+ break;
+ }
+
+ if (flctl->page_size) {
+ set_cmd_regs(mtd, command, (NAND_CMD_READSTART << 8)
+ | NAND_CMD_READ0);
+ set_addr(mtd, mtd->writesize, page_addr);
+ } else {
+ set_cmd_regs(mtd, command, command);
+ set_addr(mtd, 0, page_addr);
+ }
+ flctl->read_bytes = mtd->oobsize;
+ goto read_normal_exit;
+
+ case NAND_CMD_RNDOUT:
+ if (flctl->hwecc)
+ break;
+
+ if (flctl->page_size)
+ set_cmd_regs(mtd, command, (NAND_CMD_RNDOUTSTART << 8)
+ | command);
+ else
+ set_cmd_regs(mtd, command, command);
+
+ set_addr(mtd, column, 0);
+
+ flctl->read_bytes = mtd->writesize + mtd->oobsize - column;
+ goto read_normal_exit;
+
+ case NAND_CMD_READID:
+ set_cmd_regs(mtd, command, command);
+
+ /* READID is always performed using an 8-bit bus */
+ if (flctl->chip.options & NAND_BUSWIDTH_16)
+ column <<= 1;
+ set_addr(mtd, column, 0);
+
+ flctl->read_bytes = 8;
+ writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+ empty_fifo(flctl);
+ start_translation(flctl);
+ read_fiforeg(flctl, flctl->read_bytes, 0);
+ wait_completion(flctl);
+ break;
+
+ case NAND_CMD_ERASE1:
+ flctl->erase1_page_addr = page_addr;
+ break;
+
+ case NAND_CMD_ERASE2:
+ set_cmd_regs(mtd, NAND_CMD_ERASE1,
+ (command << 8) | NAND_CMD_ERASE1);
+ set_addr(mtd, -1, flctl->erase1_page_addr);
+ start_translation(flctl);
+ wait_completion(flctl);
+ break;
+
+ case NAND_CMD_SEQIN:
+ if (!flctl->page_size) {
+ /* output read command */
+ if (column >= mtd->writesize) {
+ column -= mtd->writesize;
+ read_cmd = NAND_CMD_READOOB;
+ } else if (column < 256) {
+ read_cmd = NAND_CMD_READ0;
+ } else {
+ column -= 256;
+ read_cmd = NAND_CMD_READ1;
+ }
+ }
+ flctl->seqin_column = column;
+ flctl->seqin_page_addr = page_addr;
+ flctl->seqin_read_cmd = read_cmd;
+ break;
+
+ case NAND_CMD_PAGEPROG:
+ empty_fifo(flctl);
+ if (!flctl->page_size) {
+ set_cmd_regs(mtd, NAND_CMD_SEQIN,
+ flctl->seqin_read_cmd);
+ set_addr(mtd, -1, -1);
+ writel(0, FLDTCNTR(flctl)); /* set 0 size */
+ start_translation(flctl);
+ wait_completion(flctl);
+ }
+ if (flctl->hwecc) {
+ /* write page with hwecc */
+ if (flctl->seqin_column == mtd->writesize)
+ execmd_write_oob(mtd);
+ else if (!flctl->seqin_column)
+ execmd_write_page_sector(mtd);
+ else
+ printk(KERN_ERR "Invalid address !?\n");
+ break;
+ }
+ set_cmd_regs(mtd, command, (command << 8) | NAND_CMD_SEQIN);
+ set_addr(mtd, flctl->seqin_column, flctl->seqin_page_addr);
+ writel(flctl->index, FLDTCNTR(flctl)); /* set write size */
+ start_translation(flctl);
+ write_fiforeg(flctl, flctl->index, 0);
+ wait_completion(flctl);
+ break;
+
+ case NAND_CMD_STATUS:
+ set_cmd_regs(mtd, command, command);
+ set_addr(mtd, -1, -1);
+
+ flctl->read_bytes = 1;
+ writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+ start_translation(flctl);
+ read_datareg(flctl, 0); /* read and end */
+ break;
+
+ case NAND_CMD_RESET:
+ set_cmd_regs(mtd, command, command);
+ set_addr(mtd, -1, -1);
+
+ writel(0, FLDTCNTR(flctl)); /* set 0 size */
+ start_translation(flctl);
+ wait_completion(flctl);
+ break;
+
+ default:
+ break;
+ }
+ goto runtime_exit;
+
+read_normal_exit:
+ writel(flctl->read_bytes, FLDTCNTR(flctl)); /* set read size */
+ empty_fifo(flctl);
+ start_translation(flctl);
+ read_fiforeg(flctl, flctl->read_bytes, 0);
+ wait_completion(flctl);
+runtime_exit:
+ pm_runtime_put_sync(&flctl->pdev->dev);
+ return;
+}
+
+static void flctl_select_chip(struct mtd_info *mtd, int chipnr)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ int ret;
+
+ switch (chipnr) {
+ case -1:
+ flctl->flcmncr_base &= ~CE0_ENABLE;
+
+ pm_runtime_get_sync(&flctl->pdev->dev);
+ writel(flctl->flcmncr_base, FLCMNCR(flctl));
+
+ if (flctl->qos_request) {
+ dev_pm_qos_remove_request(&flctl->pm_qos);
+ flctl->qos_request = 0;
+ }
+
+ pm_runtime_put_sync(&flctl->pdev->dev);
+ break;
+ case 0:
+ flctl->flcmncr_base |= CE0_ENABLE;
+
+ if (!flctl->qos_request) {
+ ret = dev_pm_qos_add_request(&flctl->pdev->dev,
+ &flctl->pm_qos,
+ DEV_PM_QOS_RESUME_LATENCY,
+ 100);
+ if (ret < 0)
+ dev_err(&flctl->pdev->dev,
+ "PM QoS request failed: %d\n", ret);
+ flctl->qos_request = 1;
+ }
+
+ if (flctl->holden) {
+ pm_runtime_get_sync(&flctl->pdev->dev);
+ writel(HOLDEN, FLHOLDCR(flctl));
+ pm_runtime_put_sync(&flctl->pdev->dev);
+ }
+ break;
+ default:
+ BUG();
+ }
+}
+
+static void flctl_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+
+ memcpy(&flctl->done_buff[flctl->index], buf, len);
+ flctl->index += len;
+}
+
+static uint8_t flctl_read_byte(struct mtd_info *mtd)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ uint8_t data;
+
+ data = flctl->done_buff[flctl->index];
+ flctl->index++;
+ return data;
+}
+
+static uint16_t flctl_read_word(struct mtd_info *mtd)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ uint16_t *buf = (uint16_t *)&flctl->done_buff[flctl->index];
+
+ flctl->index += 2;
+ return *buf;
+}
+
+static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+
+ memcpy(buf, &flctl->done_buff[flctl->index], len);
+ flctl->index += len;
+}
+
+static int flctl_chip_init_tail(struct mtd_info *mtd)
+{
+ struct sh_flctl *flctl = mtd_to_flctl(mtd);
+ struct nand_chip *chip = &flctl->chip;
+
+ if (mtd->writesize == 512) {
+ flctl->page_size = 0;
+ if (chip->chipsize > (32 << 20)) {
+ /* big than 32MB */
+ flctl->rw_ADRCNT = ADRCNT_4;
+ flctl->erase_ADRCNT = ADRCNT_3;
+ } else if (chip->chipsize > (2 << 16)) {
+ /* big than 128KB */
+ flctl->rw_ADRCNT = ADRCNT_3;
+ flctl->erase_ADRCNT = ADRCNT_2;
+ } else {
+ flctl->rw_ADRCNT = ADRCNT_2;
+ flctl->erase_ADRCNT = ADRCNT_1;
+ }
+ } else {
+ flctl->page_size = 1;
+ if (chip->chipsize > (128 << 20)) {
+ /* big than 128MB */
+ flctl->rw_ADRCNT = ADRCNT2_E;
+ flctl->erase_ADRCNT = ADRCNT_3;
+ } else if (chip->chipsize > (8 << 16)) {
+ /* big than 512KB */
+ flctl->rw_ADRCNT = ADRCNT_4;
+ flctl->erase_ADRCNT = ADRCNT_2;
+ } else {
+ flctl->rw_ADRCNT = ADRCNT_3;
+ flctl->erase_ADRCNT = ADRCNT_1;
+ }
+ }
+
+ if (flctl->hwecc) {
+ if (mtd->writesize == 512) {
+ chip->ecc.layout = &flctl_4secc_oob_16;
+ chip->badblock_pattern = &flctl_4secc_smallpage;
+ } else {
+ chip->ecc.layout = &flctl_4secc_oob_64;
+ chip->badblock_pattern = &flctl_4secc_largepage;
+ }
+
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 10;
+ chip->ecc.strength = 4;
+ chip->ecc.read_page = flctl_read_page_hwecc;
+ chip->ecc.write_page = flctl_write_page_hwecc;
+ chip->ecc.mode = NAND_ECC_HW;
+
+ /* 4 symbols ECC enabled */
+ flctl->flcmncr_base |= _4ECCEN;
+ } else {
+ chip->ecc.mode = NAND_ECC_SOFT;
+ }
+
+ return 0;
+}
+
+static irqreturn_t flctl_handle_flste(int irq, void *dev_id)
+{
+ struct sh_flctl *flctl = dev_id;
+
+ dev_err(&flctl->pdev->dev, "flste irq: %x\n", readl(FLINTDMACR(flctl)));
+ writel(flctl->flintdmacr_base, FLINTDMACR(flctl));
+
+ return IRQ_HANDLED;
+}
+
+struct flctl_soc_config {
+ unsigned long flcmncr_val;
+ unsigned has_hwecc:1;
+ unsigned use_holden:1;
+};
+
+static struct flctl_soc_config flctl_sh7372_config = {
+ .flcmncr_val = CLK_16B_12L_4H | TYPESEL_SET | SHBUSSEL,
+ .has_hwecc = 1,
+ .use_holden = 1,
+};
+
+static const struct of_device_id of_flctl_match[] = {
+ { .compatible = "renesas,shmobile-flctl-sh7372",
+ .data = &flctl_sh7372_config },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_flctl_match);
+
+static struct sh_flctl_platform_data *flctl_parse_dt(struct device *dev)
+{
+ const struct of_device_id *match;
+ struct flctl_soc_config *config;
+ struct sh_flctl_platform_data *pdata;
+ struct device_node *dn = dev->of_node;
+ int ret;
+
+ match = of_match_device(of_flctl_match, dev);
+ if (match)
+ config = (struct flctl_soc_config *)match->data;
+ else {
+ dev_err(dev, "%s: no OF configuration attached\n", __func__);
+ return NULL;
+ }
+
+ pdata = devm_kzalloc(dev, sizeof(struct sh_flctl_platform_data),
+ GFP_KERNEL);
+ if (!pdata)
+ return NULL;
+
+ /* set SoC specific options */
+ pdata->flcmncr_val = config->flcmncr_val;
+ pdata->has_hwecc = config->has_hwecc;
+ pdata->use_holden = config->use_holden;
+
+ /* parse user defined options */
+ ret = of_get_nand_bus_width(dn);
+ if (ret == 16)
+ pdata->flcmncr_val |= SEL_16BIT;
+ else if (ret != 8) {
+ dev_err(dev, "%s: invalid bus width\n", __func__);
+ return NULL;
+ }
+
+ return pdata;
+}
+
+static int flctl_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct sh_flctl *flctl;
+ struct mtd_info *flctl_mtd;
+ struct nand_chip *nand;
+ struct sh_flctl_platform_data *pdata;
+ int ret;
+ int irq;
+ struct mtd_part_parser_data ppdata = {};
+
+ flctl = devm_kzalloc(&pdev->dev, sizeof(struct sh_flctl), GFP_KERNEL);
+ if (!flctl)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ flctl->reg = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(flctl->reg))
+ return PTR_ERR(flctl->reg);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "failed to get flste irq data\n");
+ return -ENXIO;
+ }
+
+ ret = devm_request_irq(&pdev->dev, irq, flctl_handle_flste, IRQF_SHARED,
+ "flste", flctl);
+ if (ret) {
+ dev_err(&pdev->dev, "request interrupt failed.\n");
+ return ret;
+ }
+
+ if (pdev->dev.of_node)
+ pdata = flctl_parse_dt(&pdev->dev);
+ else
+ pdata = dev_get_platdata(&pdev->dev);
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "no setup data defined\n");
+ return -EINVAL;
+ }
+
+ platform_set_drvdata(pdev, flctl);
+ flctl_mtd = &flctl->mtd;
+ nand = &flctl->chip;
+ flctl_mtd->priv = nand;
+ flctl_mtd->dev.parent = &pdev->dev;
+ flctl->pdev = pdev;
+ flctl->hwecc = pdata->has_hwecc;
+ flctl->holden = pdata->use_holden;
+ flctl->flcmncr_base = pdata->flcmncr_val;
+ flctl->flintdmacr_base = flctl->hwecc ? (STERINTE | ECERB) : STERINTE;
+
+ /* Set address of hardware control function */
+ /* 20 us command delay time */
+ nand->chip_delay = 20;
+
+ nand->read_byte = flctl_read_byte;
+ nand->write_buf = flctl_write_buf;
+ nand->read_buf = flctl_read_buf;
+ nand->select_chip = flctl_select_chip;
+ nand->cmdfunc = flctl_cmdfunc;
+
+ if (pdata->flcmncr_val & SEL_16BIT) {
+ nand->options |= NAND_BUSWIDTH_16;
+ nand->read_word = flctl_read_word;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_resume(&pdev->dev);
+
+ flctl_setup_dma(flctl);
+
+ ret = nand_scan_ident(flctl_mtd, 1, NULL);
+ if (ret)
+ goto err_chip;
+
+ ret = flctl_chip_init_tail(flctl_mtd);
+ if (ret)
+ goto err_chip;
+
+ ret = nand_scan_tail(flctl_mtd);
+ if (ret)
+ goto err_chip;
+
+ ppdata.of_node = pdev->dev.of_node;
+ ret = mtd_device_parse_register(flctl_mtd, NULL, &ppdata, pdata->parts,
+ pdata->nr_parts);
+
+ return 0;
+
+err_chip:
+ flctl_release_dma(flctl);
+ pm_runtime_disable(&pdev->dev);
+ return ret;
+}
+
+static int flctl_remove(struct platform_device *pdev)
+{
+ struct sh_flctl *flctl = platform_get_drvdata(pdev);
+
+ flctl_release_dma(flctl);
+ nand_release(&flctl->mtd);
+ pm_runtime_disable(&pdev->dev);
+
+ return 0;
+}
+
+static struct platform_driver flctl_driver = {
+ .remove = flctl_remove,
+ .driver = {
+ .name = "sh_flctl",
+ .of_match_table = of_match_ptr(of_flctl_match),
+ },
+};
+
+module_platform_driver_probe(flctl_driver, flctl_probe);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Yoshihiro Shimoda");
+MODULE_DESCRIPTION("SuperH FLCTL driver");
+MODULE_ALIAS("platform:sh_flctl");
diff --git a/drivers/mtd/nand/sharpsl.c b/drivers/mtd/nand/sharpsl.c
new file mode 100644
index 0000000..082b600
--- /dev/null
+++ b/drivers/mtd/nand/sharpsl.c
@@ -0,0 +1,232 @@
+/*
+ * drivers/mtd/nand/sharpsl.c
+ *
+ * Copyright (C) 2004 Richard Purdie
+ * Copyright (C) 2008 Dmitry Baryshkov
+ *
+ * Based on Sharp's NAND driver sharp_sl.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/genhd.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/sharpsl.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+#include <asm/io.h>
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+struct sharpsl_nand {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+
+ void __iomem *io;
+};
+
+#define mtd_to_sharpsl(_mtd) container_of(_mtd, struct sharpsl_nand, mtd)
+
+/* register offset */
+#define ECCLPLB 0x00 /* line parity 7 - 0 bit */
+#define ECCLPUB 0x04 /* line parity 15 - 8 bit */
+#define ECCCP 0x08 /* column parity 5 - 0 bit */
+#define ECCCNTR 0x0C /* ECC byte counter */
+#define ECCCLRR 0x10 /* cleare ECC */
+#define FLASHIO 0x14 /* Flash I/O */
+#define FLASHCTL 0x18 /* Flash Control */
+
+/* Flash control bit */
+#define FLRYBY (1 << 5)
+#define FLCE1 (1 << 4)
+#define FLWP (1 << 3)
+#define FLALE (1 << 2)
+#define FLCLE (1 << 1)
+#define FLCE0 (1 << 0)
+
+/*
+ * hardware specific access to control-lines
+ * ctrl:
+ * NAND_CNE: bit 0 -> ! bit 0 & 4
+ * NAND_CLE: bit 1 -> bit 1
+ * NAND_ALE: bit 2 -> bit 2
+ *
+ */
+static void sharpsl_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ unsigned char bits = ctrl & 0x07;
+
+ bits |= (ctrl & 0x01) << 4;
+
+ bits ^= 0x11;
+
+ writeb((readb(sharpsl->io + FLASHCTL) & ~0x17) | bits, sharpsl->io + FLASHCTL);
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ writeb(cmd, chip->IO_ADDR_W);
+}
+
+static int sharpsl_nand_dev_ready(struct mtd_info *mtd)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ return !((readb(sharpsl->io + FLASHCTL) & FLRYBY) == 0);
+}
+
+static void sharpsl_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ writeb(0, sharpsl->io + ECCCLRR);
+}
+
+static int sharpsl_nand_calculate_ecc(struct mtd_info *mtd, const u_char * dat, u_char * ecc_code)
+{
+ struct sharpsl_nand *sharpsl = mtd_to_sharpsl(mtd);
+ ecc_code[0] = ~readb(sharpsl->io + ECCLPUB);
+ ecc_code[1] = ~readb(sharpsl->io + ECCLPLB);
+ ecc_code[2] = (~readb(sharpsl->io + ECCCP) << 2) | 0x03;
+ return readb(sharpsl->io + ECCCNTR) != 0;
+}
+
+/*
+ * Main initialization routine
+ */
+static int sharpsl_nand_probe(struct platform_device *pdev)
+{
+ struct nand_chip *this;
+ struct resource *r;
+ int err = 0;
+ struct sharpsl_nand *sharpsl;
+ struct sharpsl_nand_platform_data *data = dev_get_platdata(&pdev->dev);
+
+ if (!data) {
+ dev_err(&pdev->dev, "no platform data!\n");
+ return -EINVAL;
+ }
+
+ /* Allocate memory for MTD device structure and private data */
+ sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL);
+ if (!sharpsl)
+ return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!r) {
+ dev_err(&pdev->dev, "no io memory resource defined!\n");
+ err = -ENODEV;
+ goto err_get_res;
+ }
+
+ /* map physical address */
+ sharpsl->io = ioremap(r->start, resource_size(r));
+ if (!sharpsl->io) {
+ dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n");
+ err = -EIO;
+ goto err_ioremap;
+ }
+
+ /* Get pointer to private data */
+ this = (struct nand_chip *)(&sharpsl->chip);
+
+ /* Link the private data with the MTD structure */
+ sharpsl->mtd.priv = this;
+ sharpsl->mtd.dev.parent = &pdev->dev;
+
+ platform_set_drvdata(pdev, sharpsl);
+
+ /*
+ * PXA initialize
+ */
+ writeb(readb(sharpsl->io + FLASHCTL) | FLWP, sharpsl->io + FLASHCTL);
+
+ /* Set address of NAND IO lines */
+ this->IO_ADDR_R = sharpsl->io + FLASHIO;
+ this->IO_ADDR_W = sharpsl->io + FLASHIO;
+ /* Set address of hardware control function */
+ this->cmd_ctrl = sharpsl_nand_hwcontrol;
+ this->dev_ready = sharpsl_nand_dev_ready;
+ /* 15 us command delay time */
+ this->chip_delay = 15;
+ /* set eccmode using hardware ECC */
+ this->ecc.mode = NAND_ECC_HW;
+ this->ecc.size = 256;
+ this->ecc.bytes = 3;
+ this->ecc.strength = 1;
+ this->badblock_pattern = data->badblock_pattern;
+ this->ecc.layout = data->ecc_layout;
+ this->ecc.hwctl = sharpsl_nand_enable_hwecc;
+ this->ecc.calculate = sharpsl_nand_calculate_ecc;
+ this->ecc.correct = nand_correct_data;
+
+ /* Scan to find existence of the device */
+ err = nand_scan(&sharpsl->mtd, 1);
+ if (err)
+ goto err_scan;
+
+ /* Register the partitions */
+ sharpsl->mtd.name = "sharpsl-nand";
+
+ err = mtd_device_parse_register(&sharpsl->mtd, NULL, NULL,
+ data->partitions, data->nr_partitions);
+ if (err)
+ goto err_add;
+
+ /* Return happy */
+ return 0;
+
+err_add:
+ nand_release(&sharpsl->mtd);
+
+err_scan:
+ iounmap(sharpsl->io);
+err_ioremap:
+err_get_res:
+ kfree(sharpsl);
+ return err;
+}
+
+/*
+ * Clean up routine
+ */
+static int sharpsl_nand_remove(struct platform_device *pdev)
+{
+ struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev);
+
+ /* Release resources, unregister device */
+ nand_release(&sharpsl->mtd);
+
+ iounmap(sharpsl->io);
+
+ /* Free the MTD device structure */
+ kfree(sharpsl);
+
+ return 0;
+}
+
+static struct platform_driver sharpsl_nand_driver = {
+ .driver = {
+ .name = "sharpsl-nand",
+ },
+ .probe = sharpsl_nand_probe,
+ .remove = sharpsl_nand_remove,
+};
+
+module_platform_driver(sharpsl_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
+MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");
diff --git a/drivers/mtd/nand/sm_common.c b/drivers/mtd/nand/sm_common.c
new file mode 100644
index 0000000..e06b5e5
--- /dev/null
+++ b/drivers/mtd/nand/sm_common.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright © 2009 - Maxim Levitsky
+ * Common routines & support for xD format
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/mtd/nand.h>
+#include <linux/module.h>
+#include <linux/sizes.h>
+#include "sm_common.h"
+
+static struct nand_ecclayout nand_oob_sm = {
+ .eccbytes = 6,
+ .eccpos = {8, 9, 10, 13, 14, 15},
+ .oobfree = {
+ {.offset = 0 , .length = 4}, /* reserved */
+ {.offset = 6 , .length = 2}, /* LBA1 */
+ {.offset = 11, .length = 2} /* LBA2 */
+ }
+};
+
+/* NOTE: This layout is is not compatabable with SmartMedia, */
+/* because the 256 byte devices have page depenent oob layout */
+/* However it does preserve the bad block markers */
+/* If you use smftl, it will bypass this and work correctly */
+/* If you not, then you break SmartMedia compliance anyway */
+
+static struct nand_ecclayout nand_oob_sm_small = {
+ .eccbytes = 3,
+ .eccpos = {0, 1, 2},
+ .oobfree = {
+ {.offset = 3 , .length = 2}, /* reserved */
+ {.offset = 6 , .length = 2}, /* LBA1 */
+ }
+};
+
+
+static int sm_block_markbad(struct mtd_info *mtd, loff_t ofs)
+{
+ struct mtd_oob_ops ops;
+ struct sm_oob oob;
+ int ret;
+
+ memset(&oob, -1, SM_OOB_SIZE);
+ oob.block_status = 0x0F;
+
+ /* As long as this function is called on erase block boundaries
+ it will work correctly for 256 byte nand */
+ ops.mode = MTD_OPS_PLACE_OOB;
+ ops.ooboffs = 0;
+ ops.ooblen = mtd->oobsize;
+ ops.oobbuf = (void *)&oob;
+ ops.datbuf = NULL;
+
+
+ ret = mtd_write_oob(mtd, ofs, &ops);
+ if (ret < 0 || ops.oobretlen != SM_OOB_SIZE) {
+ printk(KERN_NOTICE
+ "sm_common: can't mark sector at %i as bad\n",
+ (int)ofs);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static struct nand_flash_dev nand_smartmedia_flash_ids[] = {
+ LEGACY_ID_NAND("SmartMedia 2MiB 3,3V ROM", 0x5d, 2, SZ_8K, NAND_ROM),
+ LEGACY_ID_NAND("SmartMedia 4MiB 3,3V", 0xe3, 4, SZ_8K, 0),
+ LEGACY_ID_NAND("SmartMedia 4MiB 3,3/5V", 0xe5, 4, SZ_8K, 0),
+ LEGACY_ID_NAND("SmartMedia 4MiB 5V", 0x6b, 4, SZ_8K, 0),
+ LEGACY_ID_NAND("SmartMedia 4MiB 3,3V ROM", 0xd5, 4, SZ_8K, NAND_ROM),
+ LEGACY_ID_NAND("SmartMedia 8MiB 3,3V", 0xe6, 8, SZ_8K, 0),
+ LEGACY_ID_NAND("SmartMedia 8MiB 3,3V ROM", 0xd6, 8, SZ_8K, NAND_ROM),
+ LEGACY_ID_NAND("SmartMedia 16MiB 3,3V", 0x73, 16, SZ_16K, 0),
+ LEGACY_ID_NAND("SmartMedia 16MiB 3,3V ROM", 0x57, 16, SZ_16K, NAND_ROM),
+ LEGACY_ID_NAND("SmartMedia 32MiB 3,3V", 0x75, 32, SZ_16K, 0),
+ LEGACY_ID_NAND("SmartMedia 32MiB 3,3V ROM", 0x58, 32, SZ_16K, NAND_ROM),
+ LEGACY_ID_NAND("SmartMedia 64MiB 3,3V", 0x76, 64, SZ_16K, 0),
+ LEGACY_ID_NAND("SmartMedia 64MiB 3,3V ROM", 0xd9, 64, SZ_16K, NAND_ROM),
+ LEGACY_ID_NAND("SmartMedia 128MiB 3,3V", 0x79, 128, SZ_16K, 0),
+ LEGACY_ID_NAND("SmartMedia 128MiB 3,3V ROM", 0xda, 128, SZ_16K, NAND_ROM),
+ LEGACY_ID_NAND("SmartMedia 256MiB 3, 3V", 0x71, 256, SZ_16K, 0),
+ LEGACY_ID_NAND("SmartMedia 256MiB 3,3V ROM", 0x5b, 256, SZ_16K, NAND_ROM),
+ {NULL}
+};
+
+static struct nand_flash_dev nand_xd_flash_ids[] = {
+ LEGACY_ID_NAND("xD 16MiB 3,3V", 0x73, 16, SZ_16K, 0),
+ LEGACY_ID_NAND("xD 32MiB 3,3V", 0x75, 32, SZ_16K, 0),
+ LEGACY_ID_NAND("xD 64MiB 3,3V", 0x76, 64, SZ_16K, 0),
+ LEGACY_ID_NAND("xD 128MiB 3,3V", 0x79, 128, SZ_16K, 0),
+ LEGACY_ID_NAND("xD 256MiB 3,3V", 0x71, 256, SZ_16K, NAND_BROKEN_XD),
+ LEGACY_ID_NAND("xD 512MiB 3,3V", 0xdc, 512, SZ_16K, NAND_BROKEN_XD),
+ LEGACY_ID_NAND("xD 1GiB 3,3V", 0xd3, 1024, SZ_16K, NAND_BROKEN_XD),
+ LEGACY_ID_NAND("xD 2GiB 3,3V", 0xd5, 2048, SZ_16K, NAND_BROKEN_XD),
+ {NULL}
+};
+
+int sm_register_device(struct mtd_info *mtd, int smartmedia)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+
+ chip->options |= NAND_SKIP_BBTSCAN;
+
+ /* Scan for card properties */
+ ret = nand_scan_ident(mtd, 1, smartmedia ?
+ nand_smartmedia_flash_ids : nand_xd_flash_ids);
+
+ if (ret)
+ return ret;
+
+ /* Bad block marker position */
+ chip->badblockpos = 0x05;
+ chip->badblockbits = 7;
+ chip->block_markbad = sm_block_markbad;
+
+ /* ECC layout */
+ if (mtd->writesize == SM_SECTOR_SIZE)
+ chip->ecc.layout = &nand_oob_sm;
+ else if (mtd->writesize == SM_SMALL_PAGE)
+ chip->ecc.layout = &nand_oob_sm_small;
+ else
+ return -ENODEV;
+
+ ret = nand_scan_tail(mtd);
+
+ if (ret)
+ return ret;
+
+ return mtd_device_register(mtd, NULL, 0);
+}
+EXPORT_SYMBOL_GPL(sm_register_device);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Maxim Levitsky <maximlevitsky@gmail.com>");
+MODULE_DESCRIPTION("Common SmartMedia/xD functions");
diff --git a/drivers/mtd/nand/sm_common.h b/drivers/mtd/nand/sm_common.h
new file mode 100644
index 0000000..d3e028e
--- /dev/null
+++ b/drivers/mtd/nand/sm_common.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright © 2009 - Maxim Levitsky
+ * Common routines & support for SmartMedia/xD format
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/bitops.h>
+#include <linux/mtd/mtd.h>
+
+/* Full oob structure as written on the flash */
+struct sm_oob {
+ uint32_t reserved;
+ uint8_t data_status;
+ uint8_t block_status;
+ uint8_t lba_copy1[2];
+ uint8_t ecc2[3];
+ uint8_t lba_copy2[2];
+ uint8_t ecc1[3];
+} __packed;
+
+
+/* one sector is always 512 bytes, but it can consist of two nand pages */
+#define SM_SECTOR_SIZE 512
+
+/* oob area is also 16 bytes, but might be from two pages */
+#define SM_OOB_SIZE 16
+
+/* This is maximum zone size, and all devices that have more that one zone
+ have this size */
+#define SM_MAX_ZONE_SIZE 1024
+
+/* support for small page nand */
+#define SM_SMALL_PAGE 256
+#define SM_SMALL_OOB_SIZE 8
+
+
+extern int sm_register_device(struct mtd_info *mtd, int smartmedia);
+
+
+static inline int sm_sector_valid(struct sm_oob *oob)
+{
+ return hweight16(oob->data_status) >= 5;
+}
+
+static inline int sm_block_valid(struct sm_oob *oob)
+{
+ return hweight16(oob->block_status) >= 7;
+}
+
+static inline int sm_block_erased(struct sm_oob *oob)
+{
+ static const uint32_t erased_pattern[4] = {
+ 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF };
+
+ /* First test for erased block */
+ if (!memcmp(oob, erased_pattern, sizeof(*oob)))
+ return 1;
+ return 0;
+}
diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c
new file mode 100644
index 0000000..b94f534
--- /dev/null
+++ b/drivers/mtd/nand/socrates_nand.c
@@ -0,0 +1,252 @@
+/*
+ * drivers/mtd/nand/socrates_nand.c
+ *
+ * Copyright © 2008 Ilya Yanok, Emcraft Systems
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/io.h>
+
+#define FPGA_NAND_CMD_MASK (0x7 << 28)
+#define FPGA_NAND_CMD_COMMAND (0x0 << 28)
+#define FPGA_NAND_CMD_ADDR (0x1 << 28)
+#define FPGA_NAND_CMD_READ (0x2 << 28)
+#define FPGA_NAND_CMD_WRITE (0x3 << 28)
+#define FPGA_NAND_BUSY (0x1 << 15)
+#define FPGA_NAND_ENABLE (0x1 << 31)
+#define FPGA_NAND_DATA_SHIFT 16
+
+struct socrates_nand_host {
+ struct nand_chip nand_chip;
+ struct mtd_info mtd;
+ void __iomem *io_base;
+ struct device *dev;
+};
+
+/**
+ * socrates_nand_write_buf - write buffer to chip
+ * @mtd: MTD device structure
+ * @buf: data buffer
+ * @len: number of bytes to write
+ */
+static void socrates_nand_write_buf(struct mtd_info *mtd,
+ const uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+ struct socrates_nand_host *host = this->priv;
+
+ for (i = 0; i < len; i++) {
+ out_be32(host->io_base, FPGA_NAND_ENABLE |
+ FPGA_NAND_CMD_WRITE |
+ (buf[i] << FPGA_NAND_DATA_SHIFT));
+ }
+}
+
+/**
+ * socrates_nand_read_buf - read chip data into buffer
+ * @mtd: MTD device structure
+ * @buf: buffer to store date
+ * @len: number of bytes to read
+ */
+static void socrates_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ int i;
+ struct nand_chip *this = mtd->priv;
+ struct socrates_nand_host *host = this->priv;
+ uint32_t val;
+
+ val = FPGA_NAND_ENABLE | FPGA_NAND_CMD_READ;
+
+ out_be32(host->io_base, val);
+ for (i = 0; i < len; i++) {
+ buf[i] = (in_be32(host->io_base) >>
+ FPGA_NAND_DATA_SHIFT) & 0xff;
+ }
+}
+
+/**
+ * socrates_nand_read_byte - read one byte from the chip
+ * @mtd: MTD device structure
+ */
+static uint8_t socrates_nand_read_byte(struct mtd_info *mtd)
+{
+ uint8_t byte;
+ socrates_nand_read_buf(mtd, &byte, sizeof(byte));
+ return byte;
+}
+
+/**
+ * socrates_nand_read_word - read one word from the chip
+ * @mtd: MTD device structure
+ */
+static uint16_t socrates_nand_read_word(struct mtd_info *mtd)
+{
+ uint16_t word;
+ socrates_nand_read_buf(mtd, (uint8_t *)&word, sizeof(word));
+ return word;
+}
+
+/*
+ * Hardware specific access to control-lines
+ */
+static void socrates_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct socrates_nand_host *host = nand_chip->priv;
+ uint32_t val;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ val = FPGA_NAND_CMD_COMMAND;
+ else
+ val = FPGA_NAND_CMD_ADDR;
+
+ if (ctrl & NAND_NCE)
+ val |= FPGA_NAND_ENABLE;
+
+ val |= (cmd & 0xff) << FPGA_NAND_DATA_SHIFT;
+
+ out_be32(host->io_base, val);
+}
+
+/*
+ * Read the Device Ready pin.
+ */
+static int socrates_nand_device_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *nand_chip = mtd->priv;
+ struct socrates_nand_host *host = nand_chip->priv;
+
+ if (in_be32(host->io_base) & FPGA_NAND_BUSY)
+ return 0; /* busy */
+ return 1;
+}
+
+/*
+ * Probe for the NAND device.
+ */
+static int socrates_nand_probe(struct platform_device *ofdev)
+{
+ struct socrates_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand_chip;
+ int res;
+ struct mtd_part_parser_data ppdata;
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = devm_kzalloc(&ofdev->dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ host->io_base = of_iomap(ofdev->dev.of_node, 0);
+ if (host->io_base == NULL) {
+ dev_err(&ofdev->dev, "ioremap failed\n");
+ return -EIO;
+ }
+
+ mtd = &host->mtd;
+ nand_chip = &host->nand_chip;
+ host->dev = &ofdev->dev;
+
+ nand_chip->priv = host; /* link the private data structures */
+ mtd->priv = nand_chip;
+ mtd->name = "socrates_nand";
+ mtd->dev.parent = &ofdev->dev;
+ ppdata.of_node = ofdev->dev.of_node;
+
+ /*should never be accessed directly */
+ nand_chip->IO_ADDR_R = (void *)0xdeadbeef;
+ nand_chip->IO_ADDR_W = (void *)0xdeadbeef;
+
+ nand_chip->cmd_ctrl = socrates_nand_cmd_ctrl;
+ nand_chip->read_byte = socrates_nand_read_byte;
+ nand_chip->read_word = socrates_nand_read_word;
+ nand_chip->write_buf = socrates_nand_write_buf;
+ nand_chip->read_buf = socrates_nand_read_buf;
+ nand_chip->dev_ready = socrates_nand_device_ready;
+
+ nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */
+
+ /* TODO: I have no idea what real delay is. */
+ nand_chip->chip_delay = 20; /* 20us command delay time */
+
+ dev_set_drvdata(&ofdev->dev, host);
+
+ /* first scan to find the device and get the page size */
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ res = -ENXIO;
+ goto out;
+ }
+
+ /* second phase scan */
+ if (nand_scan_tail(mtd)) {
+ res = -ENXIO;
+ goto out;
+ }
+
+ res = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+ if (!res)
+ return res;
+
+ nand_release(mtd);
+
+out:
+ iounmap(host->io_base);
+ return res;
+}
+
+/*
+ * Remove a NAND device.
+ */
+static int socrates_nand_remove(struct platform_device *ofdev)
+{
+ struct socrates_nand_host *host = dev_get_drvdata(&ofdev->dev);
+ struct mtd_info *mtd = &host->mtd;
+
+ nand_release(mtd);
+
+ iounmap(host->io_base);
+
+ return 0;
+}
+
+static const struct of_device_id socrates_nand_match[] =
+{
+ {
+ .compatible = "abb,socrates-nand",
+ },
+ {},
+};
+
+MODULE_DEVICE_TABLE(of, socrates_nand_match);
+
+static struct platform_driver socrates_nand_driver = {
+ .driver = {
+ .name = "socrates_nand",
+ .of_match_table = socrates_nand_match,
+ },
+ .probe = socrates_nand_probe,
+ .remove = socrates_nand_remove,
+};
+
+module_platform_driver(socrates_nand_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Ilya Yanok");
+MODULE_DESCRIPTION("NAND driver for Socrates board");
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
new file mode 100644
index 0000000..8247118
--- /dev/null
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -0,0 +1,1521 @@
+/*
+ * Copyright (C) 2013 Boris BREZILLON <b.brezillon.dev@gmail.com>
+ *
+ * Derived from:
+ * https://github.com/yuq/sunxi-nfc-mtd
+ * Copyright (C) 2013 Qiang Yu <yuq825@gmail.com>
+ *
+ * https://github.com/hno/Allwinner-Info
+ * Copyright (C) 2013 Henrik Nordström <Henrik Nordström>
+ *
+ * Copyright (C) 2013 Dmitriy B. <rzk333@gmail.com>
+ * Copyright (C) 2013 Sergey Lapin <slapin@ossfans.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/of_gpio.h>
+#include <linux/of_mtd.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+
+#define NFC_REG_CTL 0x0000
+#define NFC_REG_ST 0x0004
+#define NFC_REG_INT 0x0008
+#define NFC_REG_TIMING_CTL 0x000C
+#define NFC_REG_TIMING_CFG 0x0010
+#define NFC_REG_ADDR_LOW 0x0014
+#define NFC_REG_ADDR_HIGH 0x0018
+#define NFC_REG_SECTOR_NUM 0x001C
+#define NFC_REG_CNT 0x0020
+#define NFC_REG_CMD 0x0024
+#define NFC_REG_RCMD_SET 0x0028
+#define NFC_REG_WCMD_SET 0x002C
+#define NFC_REG_IO_DATA 0x0030
+#define NFC_REG_ECC_CTL 0x0034
+#define NFC_REG_ECC_ST 0x0038
+#define NFC_REG_DEBUG 0x003C
+#define NFC_REG_ECC_ERR_CNT(x) ((0x0040 + (x)) & ~0x3)
+#define NFC_REG_USER_DATA(x) (0x0050 + ((x) * 4))
+#define NFC_REG_SPARE_AREA 0x00A0
+#define NFC_RAM0_BASE 0x0400
+#define NFC_RAM1_BASE 0x0800
+
+/* define bit use in NFC_CTL */
+#define NFC_EN BIT(0)
+#define NFC_RESET BIT(1)
+#define NFC_BUS_WIDTH_MSK BIT(2)
+#define NFC_BUS_WIDTH_8 (0 << 2)
+#define NFC_BUS_WIDTH_16 (1 << 2)
+#define NFC_RB_SEL_MSK BIT(3)
+#define NFC_RB_SEL(x) ((x) << 3)
+#define NFC_CE_SEL_MSK GENMASK(26, 24)
+#define NFC_CE_SEL(x) ((x) << 24)
+#define NFC_CE_CTL BIT(6)
+#define NFC_PAGE_SHIFT_MSK GENMASK(11, 8)
+#define NFC_PAGE_SHIFT(x) (((x) < 10 ? 0 : (x) - 10) << 8)
+#define NFC_SAM BIT(12)
+#define NFC_RAM_METHOD BIT(14)
+#define NFC_DEBUG_CTL BIT(31)
+
+/* define bit use in NFC_ST */
+#define NFC_RB_B2R BIT(0)
+#define NFC_CMD_INT_FLAG BIT(1)
+#define NFC_DMA_INT_FLAG BIT(2)
+#define NFC_CMD_FIFO_STATUS BIT(3)
+#define NFC_STA BIT(4)
+#define NFC_NATCH_INT_FLAG BIT(5)
+#define NFC_RB_STATE(x) BIT(x + 8)
+
+/* define bit use in NFC_INT */
+#define NFC_B2R_INT_ENABLE BIT(0)
+#define NFC_CMD_INT_ENABLE BIT(1)
+#define NFC_DMA_INT_ENABLE BIT(2)
+#define NFC_INT_MASK (NFC_B2R_INT_ENABLE | \
+ NFC_CMD_INT_ENABLE | \
+ NFC_DMA_INT_ENABLE)
+
+/* define bit use in NFC_TIMING_CTL */
+#define NFC_TIMING_CTL_EDO BIT(8)
+
+/* define NFC_TIMING_CFG register layout */
+#define NFC_TIMING_CFG(tWB, tADL, tWHR, tRHW, tCAD) \
+ (((tWB) & 0x3) | (((tADL) & 0x3) << 2) | \
+ (((tWHR) & 0x3) << 4) | (((tRHW) & 0x3) << 6) | \
+ (((tCAD) & 0x7) << 8))
+
+/* define bit use in NFC_CMD */
+#define NFC_CMD_LOW_BYTE_MSK GENMASK(7, 0)
+#define NFC_CMD_HIGH_BYTE_MSK GENMASK(15, 8)
+#define NFC_CMD(x) (x)
+#define NFC_ADR_NUM_MSK GENMASK(18, 16)
+#define NFC_ADR_NUM(x) (((x) - 1) << 16)
+#define NFC_SEND_ADR BIT(19)
+#define NFC_ACCESS_DIR BIT(20)
+#define NFC_DATA_TRANS BIT(21)
+#define NFC_SEND_CMD1 BIT(22)
+#define NFC_WAIT_FLAG BIT(23)
+#define NFC_SEND_CMD2 BIT(24)
+#define NFC_SEQ BIT(25)
+#define NFC_DATA_SWAP_METHOD BIT(26)
+#define NFC_ROW_AUTO_INC BIT(27)
+#define NFC_SEND_CMD3 BIT(28)
+#define NFC_SEND_CMD4 BIT(29)
+#define NFC_CMD_TYPE_MSK GENMASK(31, 30)
+#define NFC_NORMAL_OP (0 << 30)
+#define NFC_ECC_OP (1 << 30)
+#define NFC_PAGE_OP (2 << 30)
+
+/* define bit use in NFC_RCMD_SET */
+#define NFC_READ_CMD_MSK GENMASK(7, 0)
+#define NFC_RND_READ_CMD0_MSK GENMASK(15, 8)
+#define NFC_RND_READ_CMD1_MSK GENMASK(23, 16)
+
+/* define bit use in NFC_WCMD_SET */
+#define NFC_PROGRAM_CMD_MSK GENMASK(7, 0)
+#define NFC_RND_WRITE_CMD_MSK GENMASK(15, 8)
+#define NFC_READ_CMD0_MSK GENMASK(23, 16)
+#define NFC_READ_CMD1_MSK GENMASK(31, 24)
+
+/* define bit use in NFC_ECC_CTL */
+#define NFC_ECC_EN BIT(0)
+#define NFC_ECC_PIPELINE BIT(3)
+#define NFC_ECC_EXCEPTION BIT(4)
+#define NFC_ECC_BLOCK_SIZE_MSK BIT(5)
+#define NFC_RANDOM_EN BIT(9)
+#define NFC_RANDOM_DIRECTION BIT(10)
+#define NFC_ECC_MODE_MSK GENMASK(15, 12)
+#define NFC_ECC_MODE(x) ((x) << 12)
+#define NFC_RANDOM_SEED_MSK GENMASK(30, 16)
+#define NFC_RANDOM_SEED(x) ((x) << 16)
+
+/* define bit use in NFC_ECC_ST */
+#define NFC_ECC_ERR(x) BIT(x)
+#define NFC_ECC_PAT_FOUND(x) BIT(x + 16)
+#define NFC_ECC_ERR_CNT(b, x) (((x) >> ((b) * 8)) & 0xff)
+
+#define NFC_DEFAULT_TIMEOUT_MS 1000
+
+#define NFC_SRAM_SIZE 1024
+
+#define NFC_MAX_CS 7
+
+/*
+ * Ready/Busy detection type: describes the Ready/Busy detection modes
+ *
+ * @RB_NONE: no external detection available, rely on STATUS command
+ * and software timeouts
+ * @RB_NATIVE: use sunxi NAND controller Ready/Busy support. The Ready/Busy
+ * pin of the NAND flash chip must be connected to one of the
+ * native NAND R/B pins (those which can be muxed to the NAND
+ * Controller)
+ * @RB_GPIO: use a simple GPIO to handle Ready/Busy status. The Ready/Busy
+ * pin of the NAND flash chip must be connected to a GPIO capable
+ * pin.
+ */
+enum sunxi_nand_rb_type {
+ RB_NONE,
+ RB_NATIVE,
+ RB_GPIO,
+};
+
+/*
+ * Ready/Busy structure: stores information related to Ready/Busy detection
+ *
+ * @type: the Ready/Busy detection mode
+ * @info: information related to the R/B detection mode. Either a gpio
+ * id or a native R/B id (those supported by the NAND controller).
+ */
+struct sunxi_nand_rb {
+ enum sunxi_nand_rb_type type;
+ union {
+ int gpio;
+ int nativeid;
+ } info;
+};
+
+/*
+ * Chip Select structure: stores information related to NAND Chip Select
+ *
+ * @cs: the NAND CS id used to communicate with a NAND Chip
+ * @rb: the Ready/Busy description
+ */
+struct sunxi_nand_chip_sel {
+ u8 cs;
+ struct sunxi_nand_rb rb;
+};
+
+/*
+ * sunxi HW ECC infos: stores information related to HW ECC support
+ *
+ * @mode: the sunxi ECC mode field deduced from ECC requirements
+ * @layout: the OOB layout depending on the ECC requirements and the
+ * selected ECC mode
+ */
+struct sunxi_nand_hw_ecc {
+ int mode;
+ struct nand_ecclayout layout;
+};
+
+/*
+ * NAND chip structure: stores NAND chip device related information
+ *
+ * @node: used to store NAND chips into a list
+ * @nand: base NAND chip structure
+ * @mtd: base MTD structure
+ * @clk_rate: clk_rate required for this NAND chip
+ * @timing_cfg TIMING_CFG register value for this NAND chip
+ * @selected: current active CS
+ * @nsels: number of CS lines required by the NAND chip
+ * @sels: array of CS lines descriptions
+ */
+struct sunxi_nand_chip {
+ struct list_head node;
+ struct nand_chip nand;
+ struct mtd_info mtd;
+ unsigned long clk_rate;
+ u32 timing_cfg;
+ u32 timing_ctl;
+ int selected;
+ int nsels;
+ struct sunxi_nand_chip_sel sels[0];
+};
+
+static inline struct sunxi_nand_chip *to_sunxi_nand(struct nand_chip *nand)
+{
+ return container_of(nand, struct sunxi_nand_chip, nand);
+}
+
+/*
+ * NAND Controller structure: stores sunxi NAND controller information
+ *
+ * @controller: base controller structure
+ * @dev: parent device (used to print error messages)
+ * @regs: NAND controller registers
+ * @ahb_clk: NAND Controller AHB clock
+ * @mod_clk: NAND Controller mod clock
+ * @assigned_cs: bitmask describing already assigned CS lines
+ * @clk_rate: NAND controller current clock rate
+ * @chips: a list containing all the NAND chips attached to
+ * this NAND controller
+ * @complete: a completion object used to wait for NAND
+ * controller events
+ */
+struct sunxi_nfc {
+ struct nand_hw_control controller;
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *ahb_clk;
+ struct clk *mod_clk;
+ unsigned long assigned_cs;
+ unsigned long clk_rate;
+ struct list_head chips;
+ struct completion complete;
+};
+
+static inline struct sunxi_nfc *to_sunxi_nfc(struct nand_hw_control *ctrl)
+{
+ return container_of(ctrl, struct sunxi_nfc, controller);
+}
+
+static irqreturn_t sunxi_nfc_interrupt(int irq, void *dev_id)
+{
+ struct sunxi_nfc *nfc = dev_id;
+ u32 st = readl(nfc->regs + NFC_REG_ST);
+ u32 ien = readl(nfc->regs + NFC_REG_INT);
+
+ if (!(ien & st))
+ return IRQ_NONE;
+
+ if ((ien & st) == ien)
+ complete(&nfc->complete);
+
+ writel(st & NFC_INT_MASK, nfc->regs + NFC_REG_ST);
+ writel(~st & ien & NFC_INT_MASK, nfc->regs + NFC_REG_INT);
+
+ return IRQ_HANDLED;
+}
+
+static int sunxi_nfc_wait_int(struct sunxi_nfc *nfc, u32 flags,
+ unsigned int timeout_ms)
+{
+ init_completion(&nfc->complete);
+
+ writel(flags, nfc->regs + NFC_REG_INT);
+
+ if (!timeout_ms)
+ timeout_ms = NFC_DEFAULT_TIMEOUT_MS;
+
+ if (!wait_for_completion_timeout(&nfc->complete,
+ msecs_to_jiffies(timeout_ms))) {
+ dev_err(nfc->dev, "wait interrupt timedout\n");
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static int sunxi_nfc_wait_cmd_fifo_empty(struct sunxi_nfc *nfc)
+{
+ unsigned long timeout = jiffies +
+ msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS);
+
+ do {
+ if (!(readl(nfc->regs + NFC_REG_ST) & NFC_CMD_FIFO_STATUS))
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ dev_err(nfc->dev, "wait for empty cmd FIFO timedout\n");
+ return -ETIMEDOUT;
+}
+
+static int sunxi_nfc_rst(struct sunxi_nfc *nfc)
+{
+ unsigned long timeout = jiffies +
+ msecs_to_jiffies(NFC_DEFAULT_TIMEOUT_MS);
+
+ writel(0, nfc->regs + NFC_REG_ECC_CTL);
+ writel(NFC_RESET, nfc->regs + NFC_REG_CTL);
+
+ do {
+ if (!(readl(nfc->regs + NFC_REG_CTL) & NFC_RESET))
+ return 0;
+ } while (time_before(jiffies, timeout));
+
+ dev_err(nfc->dev, "wait for NAND controller reset timedout\n");
+ return -ETIMEDOUT;
+}
+
+static int sunxi_nfc_dev_ready(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ struct sunxi_nand_rb *rb;
+ unsigned long timeo = (sunxi_nand->nand.state == FL_ERASING ? 400 : 20);
+ int ret;
+
+ if (sunxi_nand->selected < 0)
+ return 0;
+
+ rb = &sunxi_nand->sels[sunxi_nand->selected].rb;
+
+ switch (rb->type) {
+ case RB_NATIVE:
+ ret = !!(readl(nfc->regs + NFC_REG_ST) &
+ NFC_RB_STATE(rb->info.nativeid));
+ if (ret)
+ break;
+
+ sunxi_nfc_wait_int(nfc, NFC_RB_B2R, timeo);
+ ret = !!(readl(nfc->regs + NFC_REG_ST) &
+ NFC_RB_STATE(rb->info.nativeid));
+ break;
+ case RB_GPIO:
+ ret = gpio_get_value(rb->info.gpio);
+ break;
+ case RB_NONE:
+ default:
+ ret = 0;
+ dev_err(nfc->dev, "cannot check R/B NAND status!\n");
+ break;
+ }
+
+ return ret;
+}
+
+static void sunxi_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ struct sunxi_nand_chip_sel *sel;
+ u32 ctl;
+
+ if (chip > 0 && chip >= sunxi_nand->nsels)
+ return;
+
+ if (chip == sunxi_nand->selected)
+ return;
+
+ ctl = readl(nfc->regs + NFC_REG_CTL) &
+ ~(NFC_PAGE_SHIFT_MSK | NFC_CE_SEL_MSK | NFC_RB_SEL_MSK | NFC_EN);
+
+ if (chip >= 0) {
+ sel = &sunxi_nand->sels[chip];
+
+ ctl |= NFC_CE_SEL(sel->cs) | NFC_EN |
+ NFC_PAGE_SHIFT(nand->page_shift - 10);
+ if (sel->rb.type == RB_NONE) {
+ nand->dev_ready = NULL;
+ } else {
+ nand->dev_ready = sunxi_nfc_dev_ready;
+ if (sel->rb.type == RB_NATIVE)
+ ctl |= NFC_RB_SEL(sel->rb.info.nativeid);
+ }
+
+ writel(mtd->writesize, nfc->regs + NFC_REG_SPARE_AREA);
+
+ if (nfc->clk_rate != sunxi_nand->clk_rate) {
+ clk_set_rate(nfc->mod_clk, sunxi_nand->clk_rate);
+ nfc->clk_rate = sunxi_nand->clk_rate;
+ }
+ }
+
+ writel(sunxi_nand->timing_ctl, nfc->regs + NFC_REG_TIMING_CTL);
+ writel(sunxi_nand->timing_cfg, nfc->regs + NFC_REG_TIMING_CFG);
+ writel(ctl, nfc->regs + NFC_REG_CTL);
+
+ sunxi_nand->selected = chip;
+}
+
+static void sunxi_nfc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ int ret;
+ int cnt;
+ int offs = 0;
+ u32 tmp;
+
+ while (len > offs) {
+ cnt = min(len - offs, NFC_SRAM_SIZE);
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ break;
+
+ writel(cnt, nfc->regs + NFC_REG_CNT);
+ tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD;
+ writel(tmp, nfc->regs + NFC_REG_CMD);
+
+ ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ret)
+ break;
+
+ if (buf)
+ memcpy_fromio(buf + offs, nfc->regs + NFC_RAM0_BASE,
+ cnt);
+ offs += cnt;
+ }
+}
+
+static void sunxi_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+ int len)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ int ret;
+ int cnt;
+ int offs = 0;
+ u32 tmp;
+
+ while (len > offs) {
+ cnt = min(len - offs, NFC_SRAM_SIZE);
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ break;
+
+ writel(cnt, nfc->regs + NFC_REG_CNT);
+ memcpy_toio(nfc->regs + NFC_RAM0_BASE, buf + offs, cnt);
+ tmp = NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD |
+ NFC_ACCESS_DIR;
+ writel(tmp, nfc->regs + NFC_REG_CMD);
+
+ ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ret)
+ break;
+
+ offs += cnt;
+ }
+}
+
+static uint8_t sunxi_nfc_read_byte(struct mtd_info *mtd)
+{
+ uint8_t ret;
+
+ sunxi_nfc_read_buf(mtd, &ret, 1);
+
+ return ret;
+}
+
+static void sunxi_nfc_cmd_ctrl(struct mtd_info *mtd, int dat,
+ unsigned int ctrl)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ int ret;
+ u32 tmp;
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ return;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ tmp = readl(nfc->regs + NFC_REG_CTL);
+ if (ctrl & NAND_NCE)
+ tmp |= NFC_CE_CTL;
+ else
+ tmp &= ~NFC_CE_CTL;
+ writel(tmp, nfc->regs + NFC_REG_CTL);
+ }
+
+ if (dat == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE) {
+ writel(NFC_SEND_CMD1 | dat, nfc->regs + NFC_REG_CMD);
+ } else {
+ writel(dat, nfc->regs + NFC_REG_ADDR_LOW);
+ writel(NFC_SEND_ADR, nfc->regs + NFC_REG_CMD);
+ }
+
+ sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+}
+
+static void sunxi_nfc_hw_ecc_enable(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+ struct sunxi_nand_hw_ecc *data = nand->ecc.priv;
+ u32 ecc_ctl;
+
+ ecc_ctl = readl(nfc->regs + NFC_REG_ECC_CTL);
+ ecc_ctl &= ~(NFC_ECC_MODE_MSK | NFC_ECC_PIPELINE |
+ NFC_ECC_BLOCK_SIZE_MSK);
+ ecc_ctl |= NFC_ECC_EN | NFC_ECC_MODE(data->mode) | NFC_ECC_EXCEPTION;
+
+ writel(ecc_ctl, nfc->regs + NFC_REG_ECC_CTL);
+}
+
+static void sunxi_nfc_hw_ecc_disable(struct mtd_info *mtd)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+
+ writel(readl(nfc->regs + NFC_REG_ECC_CTL) & ~NFC_ECC_EN,
+ nfc->regs + NFC_REG_ECC_CTL);
+}
+
+static inline void sunxi_nfc_user_data_to_buf(u32 user_data, u8 *buf)
+{
+ buf[0] = user_data;
+ buf[1] = user_data >> 8;
+ buf[2] = user_data >> 16;
+ buf[3] = user_data >> 24;
+}
+
+static int sunxi_nfc_hw_ecc_read_chunk(struct mtd_info *mtd,
+ u8 *data, int data_off,
+ u8 *oob, int oob_off,
+ int *cur_off,
+ unsigned int *max_bitflips)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+ u32 status;
+ int ret;
+
+ if (*cur_off != data_off)
+ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, data_off, -1);
+
+ sunxi_nfc_read_buf(mtd, NULL, ecc->size);
+
+ if (data_off + ecc->size != oob_off)
+ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ return ret;
+
+ writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD | NFC_ECC_OP,
+ nfc->regs + NFC_REG_CMD);
+
+ ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ret)
+ return ret;
+
+ status = readl(nfc->regs + NFC_REG_ECC_ST);
+ ret = NFC_ECC_ERR_CNT(0, readl(nfc->regs + NFC_REG_ECC_ERR_CNT(0)));
+
+ memcpy_fromio(data, nfc->regs + NFC_RAM0_BASE, ecc->size);
+
+ nand->cmdfunc(mtd, NAND_CMD_RNDOUT, oob_off, -1);
+ sunxi_nfc_read_buf(mtd, oob, ecc->bytes + 4);
+
+ if (status & NFC_ECC_ERR(0)) {
+ ret = nand_check_erased_ecc_chunk(data, ecc->size,
+ oob, ecc->bytes + 4,
+ NULL, 0, ecc->strength);
+ } else {
+ /*
+ * The engine protects 4 bytes of OOB data per chunk.
+ * Retrieve the corrected OOB bytes.
+ */
+ sunxi_nfc_user_data_to_buf(readl(nfc->regs + NFC_REG_USER_DATA(0)),
+ oob);
+ }
+
+ if (ret < 0) {
+ mtd->ecc_stats.failed++;
+ } else {
+ mtd->ecc_stats.corrected += ret;
+ *max_bitflips = max_t(unsigned int, *max_bitflips, ret);
+ }
+
+ *cur_off = oob_off + ecc->bytes + 4;
+
+ return 0;
+}
+
+static void sunxi_nfc_hw_ecc_read_extra_oob(struct mtd_info *mtd,
+ u8 *oob, int *cur_off)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+ int offset = ((ecc->bytes + 4) * ecc->steps);
+ int len = mtd->oobsize - offset;
+
+ if (len <= 0)
+ return;
+
+ if (*cur_off != offset)
+ nand->cmdfunc(mtd, NAND_CMD_RNDOUT,
+ offset + mtd->writesize, -1);
+
+ sunxi_nfc_read_buf(mtd, oob + offset, len);
+
+ *cur_off = mtd->oobsize + mtd->writesize;
+}
+
+static inline u32 sunxi_nfc_buf_to_user_data(const u8 *buf)
+{
+ return buf[0] | (buf[1] << 8) | (buf[2] << 16) | (buf[3] << 24);
+}
+
+static int sunxi_nfc_hw_ecc_write_chunk(struct mtd_info *mtd,
+ const u8 *data, int data_off,
+ const u8 *oob, int oob_off,
+ int *cur_off)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+ int ret;
+
+ if (data_off != *cur_off)
+ nand->cmdfunc(mtd, NAND_CMD_RNDIN, data_off, -1);
+
+ sunxi_nfc_write_buf(mtd, data, ecc->size);
+
+ /* Fill OOB data in */
+ writel(sunxi_nfc_buf_to_user_data(oob),
+ nfc->regs + NFC_REG_USER_DATA(0));
+
+ if (data_off + ecc->size != oob_off)
+ nand->cmdfunc(mtd, NAND_CMD_RNDIN, oob_off, -1);
+
+ ret = sunxi_nfc_wait_cmd_fifo_empty(nfc);
+ if (ret)
+ return ret;
+
+ writel(NFC_DATA_TRANS | NFC_DATA_SWAP_METHOD |
+ NFC_ACCESS_DIR | NFC_ECC_OP,
+ nfc->regs + NFC_REG_CMD);
+
+ ret = sunxi_nfc_wait_int(nfc, NFC_CMD_INT_FLAG, 0);
+ if (ret)
+ return ret;
+
+ *cur_off = oob_off + ecc->bytes + 4;
+
+ return 0;
+}
+
+static void sunxi_nfc_hw_ecc_write_extra_oob(struct mtd_info *mtd,
+ u8 *oob, int *cur_off)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct nand_ecc_ctrl *ecc = &nand->ecc;
+ int offset = ((ecc->bytes + 4) * ecc->steps);
+ int len = mtd->oobsize - offset;
+
+ if (len <= 0)
+ return;
+
+ if (*cur_off != offset)
+ nand->cmdfunc(mtd, NAND_CMD_RNDIN,
+ offset + mtd->writesize, -1);
+
+ sunxi_nfc_write_buf(mtd, oob + offset, len);
+
+ *cur_off = mtd->oobsize + mtd->writesize;
+}
+
+static int sunxi_nfc_hw_ecc_read_page(struct mtd_info *mtd,
+ struct nand_chip *chip, uint8_t *buf,
+ int oob_required, int page)
+{
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ unsigned int max_bitflips = 0;
+ int ret, i, cur_off = 0;
+
+ sunxi_nfc_hw_ecc_enable(mtd);
+
+ for (i = 0; i < ecc->steps; i++) {
+ int data_off = i * ecc->size;
+ int oob_off = i * (ecc->bytes + 4);
+ u8 *data = buf + data_off;
+ u8 *oob = chip->oob_poi + oob_off;
+
+ ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, oob,
+ oob_off + mtd->writesize,
+ &cur_off, &max_bitflips);
+ if (ret)
+ return ret;
+ }
+
+ if (oob_required)
+ sunxi_nfc_hw_ecc_read_extra_oob(mtd, chip->oob_poi, &cur_off);
+
+ sunxi_nfc_hw_ecc_disable(mtd);
+
+ return max_bitflips;
+}
+
+static int sunxi_nfc_hw_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf, int oob_required,
+ int page)
+{
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int ret, i, cur_off = 0;
+
+ sunxi_nfc_hw_ecc_enable(mtd);
+
+ for (i = 0; i < ecc->steps; i++) {
+ int data_off = i * ecc->size;
+ int oob_off = i * (ecc->bytes + 4);
+ const u8 *data = buf + data_off;
+ const u8 *oob = chip->oob_poi + oob_off;
+
+ ret = sunxi_nfc_hw_ecc_write_chunk(mtd, data, data_off, oob,
+ oob_off + mtd->writesize,
+ &cur_off);
+ if (ret)
+ return ret;
+ }
+
+ if (oob_required)
+ sunxi_nfc_hw_ecc_write_extra_oob(mtd, chip->oob_poi, &cur_off);
+
+ sunxi_nfc_hw_ecc_disable(mtd);
+
+ return 0;
+}
+
+static int sunxi_nfc_hw_syndrome_ecc_read_page(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ uint8_t *buf, int oob_required,
+ int page)
+{
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ unsigned int max_bitflips = 0;
+ int ret, i, cur_off = 0;
+
+ sunxi_nfc_hw_ecc_enable(mtd);
+
+ for (i = 0; i < ecc->steps; i++) {
+ int data_off = i * (ecc->size + ecc->bytes + 4);
+ int oob_off = data_off + ecc->size;
+ u8 *data = buf + (i * ecc->size);
+ u8 *oob = chip->oob_poi + (i * (ecc->bytes + 4));
+
+ ret = sunxi_nfc_hw_ecc_read_chunk(mtd, data, data_off, oob,
+ oob_off, &cur_off,
+ &max_bitflips);
+ if (ret)
+ return ret;
+ }
+
+ if (oob_required)
+ sunxi_nfc_hw_ecc_read_extra_oob(mtd, chip->oob_poi, &cur_off);
+
+ sunxi_nfc_hw_ecc_disable(mtd);
+
+ return max_bitflips;
+}
+
+static int sunxi_nfc_hw_syndrome_ecc_write_page(struct mtd_info *mtd,
+ struct nand_chip *chip,
+ const uint8_t *buf,
+ int oob_required, int page)
+{
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ int ret, i, cur_off = 0;
+
+ sunxi_nfc_hw_ecc_enable(mtd);
+
+ for (i = 0; i < ecc->steps; i++) {
+ int data_off = i * (ecc->size + ecc->bytes + 4);
+ int oob_off = data_off + ecc->size;
+ const u8 *data = buf + (i * ecc->size);
+ const u8 *oob = chip->oob_poi + (i * (ecc->bytes + 4));
+
+ ret = sunxi_nfc_hw_ecc_write_chunk(mtd, data, data_off,
+ oob, oob_off, &cur_off);
+ if (ret)
+ return ret;
+ }
+
+ if (oob_required)
+ sunxi_nfc_hw_ecc_write_extra_oob(mtd, chip->oob_poi, &cur_off);
+
+ sunxi_nfc_hw_ecc_disable(mtd);
+
+ return 0;
+}
+
+static const s32 tWB_lut[] = {6, 12, 16, 20};
+static const s32 tRHW_lut[] = {4, 8, 12, 20};
+
+static int _sunxi_nand_lookup_timing(const s32 *lut, int lut_size, u32 duration,
+ u32 clk_period)
+{
+ u32 clk_cycles = DIV_ROUND_UP(duration, clk_period);
+ int i;
+
+ for (i = 0; i < lut_size; i++) {
+ if (clk_cycles <= lut[i])
+ return i;
+ }
+
+ /* Doesn't fit */
+ return -EINVAL;
+}
+
+#define sunxi_nand_lookup_timing(l, p, c) \
+ _sunxi_nand_lookup_timing(l, ARRAY_SIZE(l), p, c)
+
+static int sunxi_nand_chip_set_timings(struct sunxi_nand_chip *chip,
+ const struct nand_sdr_timings *timings)
+{
+ struct sunxi_nfc *nfc = to_sunxi_nfc(chip->nand.controller);
+ u32 min_clk_period = 0;
+ s32 tWB, tADL, tWHR, tRHW, tCAD;
+
+ /* T1 <=> tCLS */
+ if (timings->tCLS_min > min_clk_period)
+ min_clk_period = timings->tCLS_min;
+
+ /* T2 <=> tCLH */
+ if (timings->tCLH_min > min_clk_period)
+ min_clk_period = timings->tCLH_min;
+
+ /* T3 <=> tCS */
+ if (timings->tCS_min > min_clk_period)
+ min_clk_period = timings->tCS_min;
+
+ /* T4 <=> tCH */
+ if (timings->tCH_min > min_clk_period)
+ min_clk_period = timings->tCH_min;
+
+ /* T5 <=> tWP */
+ if (timings->tWP_min > min_clk_period)
+ min_clk_period = timings->tWP_min;
+
+ /* T6 <=> tWH */
+ if (timings->tWH_min > min_clk_period)
+ min_clk_period = timings->tWH_min;
+
+ /* T7 <=> tALS */
+ if (timings->tALS_min > min_clk_period)
+ min_clk_period = timings->tALS_min;
+
+ /* T8 <=> tDS */
+ if (timings->tDS_min > min_clk_period)
+ min_clk_period = timings->tDS_min;
+
+ /* T9 <=> tDH */
+ if (timings->tDH_min > min_clk_period)
+ min_clk_period = timings->tDH_min;
+
+ /* T10 <=> tRR */
+ if (timings->tRR_min > (min_clk_period * 3))
+ min_clk_period = DIV_ROUND_UP(timings->tRR_min, 3);
+
+ /* T11 <=> tALH */
+ if (timings->tALH_min > min_clk_period)
+ min_clk_period = timings->tALH_min;
+
+ /* T12 <=> tRP */
+ if (timings->tRP_min > min_clk_period)
+ min_clk_period = timings->tRP_min;
+
+ /* T13 <=> tREH */
+ if (timings->tREH_min > min_clk_period)
+ min_clk_period = timings->tREH_min;
+
+ /* T14 <=> tRC */
+ if (timings->tRC_min > (min_clk_period * 2))
+ min_clk_period = DIV_ROUND_UP(timings->tRC_min, 2);
+
+ /* T15 <=> tWC */
+ if (timings->tWC_min > (min_clk_period * 2))
+ min_clk_period = DIV_ROUND_UP(timings->tWC_min, 2);
+
+ /* T16 - T19 + tCAD */
+ tWB = sunxi_nand_lookup_timing(tWB_lut, timings->tWB_max,
+ min_clk_period);
+ if (tWB < 0) {
+ dev_err(nfc->dev, "unsupported tWB\n");
+ return tWB;
+ }
+
+ tADL = DIV_ROUND_UP(timings->tADL_min, min_clk_period) >> 3;
+ if (tADL > 3) {
+ dev_err(nfc->dev, "unsupported tADL\n");
+ return -EINVAL;
+ }
+
+ tWHR = DIV_ROUND_UP(timings->tWHR_min, min_clk_period) >> 3;
+ if (tWHR > 3) {
+ dev_err(nfc->dev, "unsupported tWHR\n");
+ return -EINVAL;
+ }
+
+ tRHW = sunxi_nand_lookup_timing(tRHW_lut, timings->tRHW_min,
+ min_clk_period);
+ if (tRHW < 0) {
+ dev_err(nfc->dev, "unsupported tRHW\n");
+ return tRHW;
+ }
+
+ /*
+ * TODO: according to ONFI specs this value only applies for DDR NAND,
+ * but Allwinner seems to set this to 0x7. Mimic them for now.
+ */
+ tCAD = 0x7;
+
+ /* TODO: A83 has some more bits for CDQSS, CS, CLHZ, CCS, WC */
+ chip->timing_cfg = NFC_TIMING_CFG(tWB, tADL, tWHR, tRHW, tCAD);
+
+ /*
+ * ONFI specification 3.1, paragraph 4.15.2 dictates that EDO data
+ * output cycle timings shall be used if the host drives tRC less than
+ * 30 ns.
+ */
+ chip->timing_ctl = (timings->tRC_min < 30000) ? NFC_TIMING_CTL_EDO : 0;
+
+ /* Convert min_clk_period from picoseconds to nanoseconds */
+ min_clk_period = DIV_ROUND_UP(min_clk_period, 1000);
+
+ /*
+ * Convert min_clk_period into a clk frequency, then get the
+ * appropriate rate for the NAND controller IP given this formula
+ * (specified in the datasheet):
+ * nand clk_rate = 2 * min_clk_rate
+ */
+ chip->clk_rate = (2 * NSEC_PER_SEC) / min_clk_period;
+
+ return 0;
+}
+
+static int sunxi_nand_chip_init_timings(struct sunxi_nand_chip *chip,
+ struct device_node *np)
+{
+ const struct nand_sdr_timings *timings;
+ int ret;
+ int mode;
+
+ mode = onfi_get_async_timing_mode(&chip->nand);
+ if (mode == ONFI_TIMING_MODE_UNKNOWN) {
+ mode = chip->nand.onfi_timing_mode_default;
+ } else {
+ uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {};
+ int i;
+
+ mode = fls(mode) - 1;
+ if (mode < 0)
+ mode = 0;
+
+ feature[0] = mode;
+ for (i = 0; i < chip->nsels; i++) {
+ chip->nand.select_chip(&chip->mtd, i);
+ ret = chip->nand.onfi_set_features(&chip->mtd,
+ &chip->nand,
+ ONFI_FEATURE_ADDR_TIMING_MODE,
+ feature);
+ chip->nand.select_chip(&chip->mtd, -1);
+ if (ret)
+ return ret;
+ }
+ }
+
+ timings = onfi_async_timing_mode_to_sdr_timings(mode);
+ if (IS_ERR(timings))
+ return PTR_ERR(timings);
+
+ return sunxi_nand_chip_set_timings(chip, timings);
+}
+
+static int sunxi_nand_hw_common_ecc_ctrl_init(struct mtd_info *mtd,
+ struct nand_ecc_ctrl *ecc,
+ struct device_node *np)
+{
+ static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
+ struct nand_chip *nand = mtd->priv;
+ struct sunxi_nand_chip *sunxi_nand = to_sunxi_nand(nand);
+ struct sunxi_nfc *nfc = to_sunxi_nfc(sunxi_nand->nand.controller);
+ struct sunxi_nand_hw_ecc *data;
+ struct nand_ecclayout *layout;
+ int nsectors;
+ int ret;
+ int i;
+
+ data = kzalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ /* Add ECC info retrieval from DT */
+ for (i = 0; i < ARRAY_SIZE(strengths); i++) {
+ if (ecc->strength <= strengths[i])
+ break;
+ }
+
+ if (i >= ARRAY_SIZE(strengths)) {
+ dev_err(nfc->dev, "unsupported strength\n");
+ ret = -ENOTSUPP;
+ goto err;
+ }
+
+ data->mode = i;
+
+ /* HW ECC always request ECC bytes for 1024 bytes blocks */
+ ecc->bytes = DIV_ROUND_UP(ecc->strength * fls(8 * 1024), 8);
+
+ /* HW ECC always work with even numbers of ECC bytes */
+ ecc->bytes = ALIGN(ecc->bytes, 2);
+
+ layout = &data->layout;
+ nsectors = mtd->writesize / ecc->size;
+
+ if (mtd->oobsize < ((ecc->bytes + 4) * nsectors)) {
+ ret = -EINVAL;
+ goto err;
+ }
+
+ layout->eccbytes = (ecc->bytes * nsectors);
+
+ ecc->layout = layout;
+ ecc->priv = data;
+
+ return 0;
+
+err:
+ kfree(data);
+
+ return ret;
+}
+
+static void sunxi_nand_hw_common_ecc_ctrl_cleanup(struct nand_ecc_ctrl *ecc)
+{
+ kfree(ecc->priv);
+}
+
+static int sunxi_nand_hw_ecc_ctrl_init(struct mtd_info *mtd,
+ struct nand_ecc_ctrl *ecc,
+ struct device_node *np)
+{
+ struct nand_ecclayout *layout;
+ int nsectors;
+ int i, j;
+ int ret;
+
+ ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
+ if (ret)
+ return ret;
+
+ ecc->read_page = sunxi_nfc_hw_ecc_read_page;
+ ecc->write_page = sunxi_nfc_hw_ecc_write_page;
+ layout = ecc->layout;
+ nsectors = mtd->writesize / ecc->size;
+
+ for (i = 0; i < nsectors; i++) {
+ if (i) {
+ layout->oobfree[i].offset =
+ layout->oobfree[i - 1].offset +
+ layout->oobfree[i - 1].length +
+ ecc->bytes;
+ layout->oobfree[i].length = 4;
+ } else {
+ /*
+ * The first 2 bytes are used for BB markers, hence we
+ * only have 2 bytes available in the first user data
+ * section.
+ */
+ layout->oobfree[i].length = 2;
+ layout->oobfree[i].offset = 2;
+ }
+
+ for (j = 0; j < ecc->bytes; j++)
+ layout->eccpos[(ecc->bytes * i) + j] =
+ layout->oobfree[i].offset +
+ layout->oobfree[i].length + j;
+ }
+
+ if (mtd->oobsize > (ecc->bytes + 4) * nsectors) {
+ layout->oobfree[nsectors].offset =
+ layout->oobfree[nsectors - 1].offset +
+ layout->oobfree[nsectors - 1].length +
+ ecc->bytes;
+ layout->oobfree[nsectors].length = mtd->oobsize -
+ ((ecc->bytes + 4) * nsectors);
+ }
+
+ return 0;
+}
+
+static int sunxi_nand_hw_syndrome_ecc_ctrl_init(struct mtd_info *mtd,
+ struct nand_ecc_ctrl *ecc,
+ struct device_node *np)
+{
+ struct nand_ecclayout *layout;
+ int nsectors;
+ int i;
+ int ret;
+
+ ret = sunxi_nand_hw_common_ecc_ctrl_init(mtd, ecc, np);
+ if (ret)
+ return ret;
+
+ ecc->prepad = 4;
+ ecc->read_page = sunxi_nfc_hw_syndrome_ecc_read_page;
+ ecc->write_page = sunxi_nfc_hw_syndrome_ecc_write_page;
+
+ layout = ecc->layout;
+ nsectors = mtd->writesize / ecc->size;
+
+ for (i = 0; i < (ecc->bytes * nsectors); i++)
+ layout->eccpos[i] = i;
+
+ layout->oobfree[0].length = mtd->oobsize - i;
+ layout->oobfree[0].offset = i;
+
+ return 0;
+}
+
+static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
+{
+ switch (ecc->mode) {
+ case NAND_ECC_HW:
+ case NAND_ECC_HW_SYNDROME:
+ sunxi_nand_hw_common_ecc_ctrl_cleanup(ecc);
+ break;
+ case NAND_ECC_NONE:
+ kfree(ecc->layout);
+ default:
+ break;
+ }
+}
+
+static int sunxi_nand_ecc_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc,
+ struct device_node *np)
+{
+ struct nand_chip *nand = mtd->priv;
+ int ret;
+
+ if (!ecc->size) {
+ ecc->size = nand->ecc_step_ds;
+ ecc->strength = nand->ecc_strength_ds;
+ }
+
+ if (!ecc->size || !ecc->strength)
+ return -EINVAL;
+
+ switch (ecc->mode) {
+ case NAND_ECC_SOFT_BCH:
+ break;
+ case NAND_ECC_HW:
+ ret = sunxi_nand_hw_ecc_ctrl_init(mtd, ecc, np);
+ if (ret)
+ return ret;
+ break;
+ case NAND_ECC_HW_SYNDROME:
+ ret = sunxi_nand_hw_syndrome_ecc_ctrl_init(mtd, ecc, np);
+ if (ret)
+ return ret;
+ break;
+ case NAND_ECC_NONE:
+ ecc->layout = kzalloc(sizeof(*ecc->layout), GFP_KERNEL);
+ if (!ecc->layout)
+ return -ENOMEM;
+ ecc->layout->oobfree[0].length = mtd->oobsize;
+ case NAND_ECC_SOFT:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
+ struct device_node *np)
+{
+ const struct nand_sdr_timings *timings;
+ struct sunxi_nand_chip *chip;
+ struct mtd_part_parser_data ppdata;
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ int nsels;
+ int ret;
+ int i;
+ u32 tmp;
+
+ if (!of_get_property(np, "reg", &nsels))
+ return -EINVAL;
+
+ nsels /= sizeof(u32);
+ if (!nsels) {
+ dev_err(dev, "invalid reg property size\n");
+ return -EINVAL;
+ }
+
+ chip = devm_kzalloc(dev,
+ sizeof(*chip) +
+ (nsels * sizeof(struct sunxi_nand_chip_sel)),
+ GFP_KERNEL);
+ if (!chip) {
+ dev_err(dev, "could not allocate chip\n");
+ return -ENOMEM;
+ }
+
+ chip->nsels = nsels;
+ chip->selected = -1;
+
+ for (i = 0; i < nsels; i++) {
+ ret = of_property_read_u32_index(np, "reg", i, &tmp);
+ if (ret) {
+ dev_err(dev, "could not retrieve reg property: %d\n",
+ ret);
+ return ret;
+ }
+
+ if (tmp > NFC_MAX_CS) {
+ dev_err(dev,
+ "invalid reg value: %u (max CS = 7)\n",
+ tmp);
+ return -EINVAL;
+ }
+
+ if (test_and_set_bit(tmp, &nfc->assigned_cs)) {
+ dev_err(dev, "CS %d already assigned\n", tmp);
+ return -EINVAL;
+ }
+
+ chip->sels[i].cs = tmp;
+
+ if (!of_property_read_u32_index(np, "allwinner,rb", i, &tmp) &&
+ tmp < 2) {
+ chip->sels[i].rb.type = RB_NATIVE;
+ chip->sels[i].rb.info.nativeid = tmp;
+ } else {
+ ret = of_get_named_gpio(np, "rb-gpios", i);
+ if (ret >= 0) {
+ tmp = ret;
+ chip->sels[i].rb.type = RB_GPIO;
+ chip->sels[i].rb.info.gpio = tmp;
+ ret = devm_gpio_request(dev, tmp, "nand-rb");
+ if (ret)
+ return ret;
+
+ ret = gpio_direction_input(tmp);
+ if (ret)
+ return ret;
+ } else {
+ chip->sels[i].rb.type = RB_NONE;
+ }
+ }
+ }
+
+ timings = onfi_async_timing_mode_to_sdr_timings(0);
+ if (IS_ERR(timings)) {
+ ret = PTR_ERR(timings);
+ dev_err(dev,
+ "could not retrieve timings for ONFI mode 0: %d\n",
+ ret);
+ return ret;
+ }
+
+ ret = sunxi_nand_chip_set_timings(chip, timings);
+ if (ret) {
+ dev_err(dev, "could not configure chip timings: %d\n", ret);
+ return ret;
+ }
+
+ nand = &chip->nand;
+ /* Default tR value specified in the ONFI spec (chapter 4.15.1) */
+ nand->chip_delay = 200;
+ nand->controller = &nfc->controller;
+ /*
+ * Set the ECC mode to the default value in case nothing is specified
+ * in the DT.
+ */
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->flash_node = np;
+ nand->select_chip = sunxi_nfc_select_chip;
+ nand->cmd_ctrl = sunxi_nfc_cmd_ctrl;
+ nand->read_buf = sunxi_nfc_read_buf;
+ nand->write_buf = sunxi_nfc_write_buf;
+ nand->read_byte = sunxi_nfc_read_byte;
+
+ mtd = &chip->mtd;
+ mtd->dev.parent = dev;
+ mtd->priv = nand;
+
+ ret = nand_scan_ident(mtd, nsels, NULL);
+ if (ret)
+ return ret;
+
+ if (nand->bbt_options & NAND_BBT_USE_FLASH)
+ nand->bbt_options |= NAND_BBT_NO_OOB;
+
+ ret = sunxi_nand_chip_init_timings(chip, np);
+ if (ret) {
+ dev_err(dev, "could not configure chip timings: %d\n", ret);
+ return ret;
+ }
+
+ ret = sunxi_nand_ecc_init(mtd, &nand->ecc, np);
+ if (ret) {
+ dev_err(dev, "ECC init failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = nand_scan_tail(mtd);
+ if (ret) {
+ dev_err(dev, "nand_scan_tail failed: %d\n", ret);
+ return ret;
+ }
+
+ ppdata.of_node = np;
+ ret = mtd_device_parse_register(mtd, NULL, &ppdata, NULL, 0);
+ if (ret) {
+ dev_err(dev, "failed to register mtd device: %d\n", ret);
+ nand_release(mtd);
+ return ret;
+ }
+
+ list_add_tail(&chip->node, &nfc->chips);
+
+ return 0;
+}
+
+static int sunxi_nand_chips_init(struct device *dev, struct sunxi_nfc *nfc)
+{
+ struct device_node *np = dev->of_node;
+ struct device_node *nand_np;
+ int nchips = of_get_child_count(np);
+ int ret;
+
+ if (nchips > 8) {
+ dev_err(dev, "too many NAND chips: %d (max = 8)\n", nchips);
+ return -EINVAL;
+ }
+
+ for_each_child_of_node(np, nand_np) {
+ ret = sunxi_nand_chip_init(dev, nfc, nand_np);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static void sunxi_nand_chips_cleanup(struct sunxi_nfc *nfc)
+{
+ struct sunxi_nand_chip *chip;
+
+ while (!list_empty(&nfc->chips)) {
+ chip = list_first_entry(&nfc->chips, struct sunxi_nand_chip,
+ node);
+ nand_release(&chip->mtd);
+ sunxi_nand_ecc_cleanup(&chip->nand.ecc);
+ list_del(&chip->node);
+ }
+}
+
+static int sunxi_nfc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *r;
+ struct sunxi_nfc *nfc;
+ int irq;
+ int ret;
+
+ nfc = devm_kzalloc(dev, sizeof(*nfc), GFP_KERNEL);
+ if (!nfc)
+ return -ENOMEM;
+
+ nfc->dev = dev;
+ spin_lock_init(&nfc->controller.lock);
+ init_waitqueue_head(&nfc->controller.wq);
+ INIT_LIST_HEAD(&nfc->chips);
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ nfc->regs = devm_ioremap_resource(dev, r);
+ if (IS_ERR(nfc->regs))
+ return PTR_ERR(nfc->regs);
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(dev, "failed to retrieve irq\n");
+ return irq;
+ }
+
+ nfc->ahb_clk = devm_clk_get(dev, "ahb");
+ if (IS_ERR(nfc->ahb_clk)) {
+ dev_err(dev, "failed to retrieve ahb clk\n");
+ return PTR_ERR(nfc->ahb_clk);
+ }
+
+ ret = clk_prepare_enable(nfc->ahb_clk);
+ if (ret)
+ return ret;
+
+ nfc->mod_clk = devm_clk_get(dev, "mod");
+ if (IS_ERR(nfc->mod_clk)) {
+ dev_err(dev, "failed to retrieve mod clk\n");
+ ret = PTR_ERR(nfc->mod_clk);
+ goto out_ahb_clk_unprepare;
+ }
+
+ ret = clk_prepare_enable(nfc->mod_clk);
+ if (ret)
+ goto out_ahb_clk_unprepare;
+
+ ret = sunxi_nfc_rst(nfc);
+ if (ret)
+ goto out_mod_clk_unprepare;
+
+ writel(0, nfc->regs + NFC_REG_INT);
+ ret = devm_request_irq(dev, irq, sunxi_nfc_interrupt,
+ 0, "sunxi-nand", nfc);
+ if (ret)
+ goto out_mod_clk_unprepare;
+
+ platform_set_drvdata(pdev, nfc);
+
+ ret = sunxi_nand_chips_init(dev, nfc);
+ if (ret) {
+ dev_err(dev, "failed to init nand chips\n");
+ goto out_mod_clk_unprepare;
+ }
+
+ return 0;
+
+out_mod_clk_unprepare:
+ clk_disable_unprepare(nfc->mod_clk);
+out_ahb_clk_unprepare:
+ clk_disable_unprepare(nfc->ahb_clk);
+
+ return ret;
+}
+
+static int sunxi_nfc_remove(struct platform_device *pdev)
+{
+ struct sunxi_nfc *nfc = platform_get_drvdata(pdev);
+
+ sunxi_nand_chips_cleanup(nfc);
+
+ return 0;
+}
+
+static const struct of_device_id sunxi_nfc_ids[] = {
+ { .compatible = "allwinner,sun4i-a10-nand" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sunxi_nfc_ids);
+
+static struct platform_driver sunxi_nfc_driver = {
+ .driver = {
+ .name = "sunxi_nand",
+ .of_match_table = sunxi_nfc_ids,
+ },
+ .probe = sunxi_nfc_probe,
+ .remove = sunxi_nfc_remove,
+};
+module_platform_driver(sunxi_nfc_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Boris BREZILLON");
+MODULE_DESCRIPTION("Allwinner NAND Flash Controller driver");
+MODULE_ALIAS("platform:sunxi_nand");
diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c
new file mode 100644
index 0000000..befddf0
--- /dev/null
+++ b/drivers/mtd/nand/tmio_nand.c
@@ -0,0 +1,509 @@
+/*
+ * Toshiba TMIO NAND flash controller driver
+ *
+ * Slightly murky pre-git history of the driver:
+ *
+ * Copyright (c) Ian Molton 2004, 2005, 2008
+ * Original work, independent of sharps code. Included hardware ECC support.
+ * Hard ECC did not work for writes in the early revisions.
+ * Copyright (c) Dirk Opfer 2005.
+ * Modifications developed from sharps code but
+ * NOT containing any, ported onto Ians base.
+ * Copyright (c) Chris Humbert 2005
+ * Copyright (c) Dmitry Baryshkov 2008
+ * Minor fixes
+ *
+ * Parts copyright Sebastian Carlier
+ *
+ * This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ */
+
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/tmio.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/slab.h>
+
+/*--------------------------------------------------------------------------*/
+
+/*
+ * NAND Flash Host Controller Configuration Register
+ */
+#define CCR_COMMAND 0x04 /* w Command */
+#define CCR_BASE 0x10 /* l NAND Flash Control Reg Base Addr */
+#define CCR_INTP 0x3d /* b Interrupt Pin */
+#define CCR_INTE 0x48 /* b Interrupt Enable */
+#define CCR_EC 0x4a /* b Event Control */
+#define CCR_ICC 0x4c /* b Internal Clock Control */
+#define CCR_ECCC 0x5b /* b ECC Control */
+#define CCR_NFTC 0x60 /* b NAND Flash Transaction Control */
+#define CCR_NFM 0x61 /* b NAND Flash Monitor */
+#define CCR_NFPSC 0x62 /* b NAND Flash Power Supply Control */
+#define CCR_NFDC 0x63 /* b NAND Flash Detect Control */
+
+/*
+ * NAND Flash Control Register
+ */
+#define FCR_DATA 0x00 /* bwl Data Register */
+#define FCR_MODE 0x04 /* b Mode Register */
+#define FCR_STATUS 0x05 /* b Status Register */
+#define FCR_ISR 0x06 /* b Interrupt Status Register */
+#define FCR_IMR 0x07 /* b Interrupt Mask Register */
+
+/* FCR_MODE Register Command List */
+#define FCR_MODE_DATA 0x94 /* Data Data_Mode */
+#define FCR_MODE_COMMAND 0x95 /* Data Command_Mode */
+#define FCR_MODE_ADDRESS 0x96 /* Data Address_Mode */
+
+#define FCR_MODE_HWECC_CALC 0xB4 /* HW-ECC Data */
+#define FCR_MODE_HWECC_RESULT 0xD4 /* HW-ECC Calc result Read_Mode */
+#define FCR_MODE_HWECC_RESET 0xF4 /* HW-ECC Reset */
+
+#define FCR_MODE_POWER_ON 0x0C /* Power Supply ON to SSFDC card */
+#define FCR_MODE_POWER_OFF 0x08 /* Power Supply OFF to SSFDC card */
+
+#define FCR_MODE_LED_OFF 0x00 /* LED OFF */
+#define FCR_MODE_LED_ON 0x04 /* LED ON */
+
+#define FCR_MODE_EJECT_ON 0x68 /* Ejection events active */
+#define FCR_MODE_EJECT_OFF 0x08 /* Ejection events ignored */
+
+#define FCR_MODE_LOCK 0x6C /* Lock_Mode. Eject Switch Invalid */
+#define FCR_MODE_UNLOCK 0x0C /* UnLock_Mode. Eject Switch is valid */
+
+#define FCR_MODE_CONTROLLER_ID 0x40 /* Controller ID Read */
+#define FCR_MODE_STANDBY 0x00 /* SSFDC card Changes Standby State */
+
+#define FCR_MODE_WE 0x80
+#define FCR_MODE_ECC1 0x40
+#define FCR_MODE_ECC0 0x20
+#define FCR_MODE_CE 0x10
+#define FCR_MODE_PCNT1 0x08
+#define FCR_MODE_PCNT0 0x04
+#define FCR_MODE_ALE 0x02
+#define FCR_MODE_CLE 0x01
+
+#define FCR_STATUS_BUSY 0x80
+
+/*--------------------------------------------------------------------------*/
+
+struct tmio_nand {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+
+ struct platform_device *dev;
+
+ void __iomem *ccr;
+ void __iomem *fcr;
+ unsigned long fcr_base;
+
+ unsigned int irq;
+
+ /* for tmio_nand_read_byte */
+ u8 read;
+ unsigned read_good:1;
+};
+
+#define mtd_to_tmio(m) container_of(m, struct tmio_nand, mtd)
+
+
+/*--------------------------------------------------------------------------*/
+
+static void tmio_nand_hwcontrol(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct tmio_nand *tmio = mtd_to_tmio(mtd);
+ struct nand_chip *chip = mtd->priv;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ u8 mode;
+
+ if (ctrl & NAND_NCE) {
+ mode = FCR_MODE_DATA;
+
+ if (ctrl & NAND_CLE)
+ mode |= FCR_MODE_CLE;
+ else
+ mode &= ~FCR_MODE_CLE;
+
+ if (ctrl & NAND_ALE)
+ mode |= FCR_MODE_ALE;
+ else
+ mode &= ~FCR_MODE_ALE;
+ } else {
+ mode = FCR_MODE_STANDBY;
+ }
+
+ tmio_iowrite8(mode, tmio->fcr + FCR_MODE);
+ tmio->read_good = 0;
+ }
+
+ if (cmd != NAND_CMD_NONE)
+ tmio_iowrite8(cmd, chip->IO_ADDR_W);
+}
+
+static int tmio_nand_dev_ready(struct mtd_info *mtd)
+{
+ struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+ return !(tmio_ioread8(tmio->fcr + FCR_STATUS) & FCR_STATUS_BUSY);
+}
+
+static irqreturn_t tmio_irq(int irq, void *__tmio)
+{
+ struct tmio_nand *tmio = __tmio;
+ struct nand_chip *nand_chip = &tmio->chip;
+
+ /* disable RDYREQ interrupt */
+ tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+
+ if (unlikely(!waitqueue_active(&nand_chip->controller->wq)))
+ dev_warn(&tmio->dev->dev, "spurious interrupt\n");
+
+ wake_up(&nand_chip->controller->wq);
+ return IRQ_HANDLED;
+}
+
+/*
+ *The TMIO core has a RDYREQ interrupt on the posedge of #SMRB.
+ *This interrupt is normally disabled, but for long operations like
+ *erase and write, we enable it to wake us up. The irq handler
+ *disables the interrupt.
+ */
+static int
+tmio_nand_wait(struct mtd_info *mtd, struct nand_chip *nand_chip)
+{
+ struct tmio_nand *tmio = mtd_to_tmio(mtd);
+ long timeout;
+
+ /* enable RDYREQ interrupt */
+ tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+ tmio_iowrite8(0x81, tmio->fcr + FCR_IMR);
+
+ timeout = wait_event_timeout(nand_chip->controller->wq,
+ tmio_nand_dev_ready(mtd),
+ msecs_to_jiffies(nand_chip->state == FL_ERASING ? 400 : 20));
+
+ if (unlikely(!tmio_nand_dev_ready(mtd))) {
+ tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+ dev_warn(&tmio->dev->dev, "still busy with %s after %d ms\n",
+ nand_chip->state == FL_ERASING ? "erase" : "program",
+ nand_chip->state == FL_ERASING ? 400 : 20);
+
+ } else if (unlikely(!timeout)) {
+ tmio_iowrite8(0x00, tmio->fcr + FCR_IMR);
+ dev_warn(&tmio->dev->dev, "timeout waiting for interrupt\n");
+ }
+
+ nand_chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1);
+ return nand_chip->read_byte(mtd);
+}
+
+/*
+ *The TMIO controller combines two 8-bit data bytes into one 16-bit
+ *word. This function separates them so nand_base.c works as expected,
+ *especially its NAND_CMD_READID routines.
+ *
+ *To prevent stale data from being read, tmio_nand_hwcontrol() clears
+ *tmio->read_good.
+ */
+static u_char tmio_nand_read_byte(struct mtd_info *mtd)
+{
+ struct tmio_nand *tmio = mtd_to_tmio(mtd);
+ unsigned int data;
+
+ if (tmio->read_good--)
+ return tmio->read;
+
+ data = tmio_ioread16(tmio->fcr + FCR_DATA);
+ tmio->read = data >> 8;
+ return data;
+}
+
+/*
+ *The TMIO controller converts an 8-bit NAND interface to a 16-bit
+ *bus interface, so all data reads and writes must be 16-bit wide.
+ *Thus, we implement 16-bit versions of the read, write, and verify
+ *buffer functions.
+ */
+static void
+tmio_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
+{
+ struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+ tmio_iowrite16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+ tmio_ioread16_rep(tmio->fcr + FCR_DATA, buf, len >> 1);
+}
+
+static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct tmio_nand *tmio = mtd_to_tmio(mtd);
+
+ tmio_iowrite8(FCR_MODE_HWECC_RESET, tmio->fcr + FCR_MODE);
+ tmio_ioread8(tmio->fcr + FCR_DATA); /* dummy read */
+ tmio_iowrite8(FCR_MODE_HWECC_CALC, tmio->fcr + FCR_MODE);
+}
+
+static int tmio_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+ u_char *ecc_code)
+{
+ struct tmio_nand *tmio = mtd_to_tmio(mtd);
+ unsigned int ecc;
+
+ tmio_iowrite8(FCR_MODE_HWECC_RESULT, tmio->fcr + FCR_MODE);
+
+ ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+ ecc_code[1] = ecc; /* 000-255 LP7-0 */
+ ecc_code[0] = ecc >> 8; /* 000-255 LP15-8 */
+ ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+ ecc_code[2] = ecc; /* 000-255 CP5-0,11b */
+ ecc_code[4] = ecc >> 8; /* 256-511 LP7-0 */
+ ecc = tmio_ioread16(tmio->fcr + FCR_DATA);
+ ecc_code[3] = ecc; /* 256-511 LP15-8 */
+ ecc_code[5] = ecc >> 8; /* 256-511 CP5-0,11b */
+
+ tmio_iowrite8(FCR_MODE_DATA, tmio->fcr + FCR_MODE);
+ return 0;
+}
+
+static int tmio_nand_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ int r0, r1;
+
+ /* assume ecc.size = 512 and ecc.bytes = 6 */
+ r0 = __nand_correct_data(buf, read_ecc, calc_ecc, 256);
+ if (r0 < 0)
+ return r0;
+ r1 = __nand_correct_data(buf + 256, read_ecc + 3, calc_ecc + 3, 256);
+ if (r1 < 0)
+ return r1;
+ return r0 + r1;
+}
+
+static int tmio_hw_init(struct platform_device *dev, struct tmio_nand *tmio)
+{
+ const struct mfd_cell *cell = mfd_get_cell(dev);
+ int ret;
+
+ if (cell->enable) {
+ ret = cell->enable(dev);
+ if (ret)
+ return ret;
+ }
+
+ /* (4Ch) CLKRUN Enable 1st spcrunc */
+ tmio_iowrite8(0x81, tmio->ccr + CCR_ICC);
+
+ /* (10h)BaseAddress 0x1000 spba.spba2 */
+ tmio_iowrite16(tmio->fcr_base, tmio->ccr + CCR_BASE);
+ tmio_iowrite16(tmio->fcr_base >> 16, tmio->ccr + CCR_BASE + 2);
+
+ /* (04h)Command Register I/O spcmd */
+ tmio_iowrite8(0x02, tmio->ccr + CCR_COMMAND);
+
+ /* (62h) Power Supply Control ssmpwc */
+ /* HardPowerOFF - SuspendOFF - PowerSupplyWait_4MS */
+ tmio_iowrite8(0x02, tmio->ccr + CCR_NFPSC);
+
+ /* (63h) Detect Control ssmdtc */
+ tmio_iowrite8(0x02, tmio->ccr + CCR_NFDC);
+
+ /* Interrupt status register clear sintst */
+ tmio_iowrite8(0x0f, tmio->fcr + FCR_ISR);
+
+ /* After power supply, Media are reset smode */
+ tmio_iowrite8(FCR_MODE_POWER_ON, tmio->fcr + FCR_MODE);
+ tmio_iowrite8(FCR_MODE_COMMAND, tmio->fcr + FCR_MODE);
+ tmio_iowrite8(NAND_CMD_RESET, tmio->fcr + FCR_DATA);
+
+ /* Standby Mode smode */
+ tmio_iowrite8(FCR_MODE_STANDBY, tmio->fcr + FCR_MODE);
+
+ mdelay(5);
+
+ return 0;
+}
+
+static void tmio_hw_stop(struct platform_device *dev, struct tmio_nand *tmio)
+{
+ const struct mfd_cell *cell = mfd_get_cell(dev);
+
+ tmio_iowrite8(FCR_MODE_POWER_OFF, tmio->fcr + FCR_MODE);
+ if (cell->disable)
+ cell->disable(dev);
+}
+
+static int tmio_probe(struct platform_device *dev)
+{
+ struct tmio_nand_data *data = dev_get_platdata(&dev->dev);
+ struct resource *fcr = platform_get_resource(dev,
+ IORESOURCE_MEM, 0);
+ struct resource *ccr = platform_get_resource(dev,
+ IORESOURCE_MEM, 1);
+ int irq = platform_get_irq(dev, 0);
+ struct tmio_nand *tmio;
+ struct mtd_info *mtd;
+ struct nand_chip *nand_chip;
+ int retval;
+
+ if (data == NULL)
+ dev_warn(&dev->dev, "NULL platform data!\n");
+
+ tmio = devm_kzalloc(&dev->dev, sizeof(*tmio), GFP_KERNEL);
+ if (!tmio)
+ return -ENOMEM;
+
+ tmio->dev = dev;
+
+ platform_set_drvdata(dev, tmio);
+ mtd = &tmio->mtd;
+ nand_chip = &tmio->chip;
+ mtd->priv = nand_chip;
+ mtd->name = "tmio-nand";
+ mtd->dev.parent = &dev->dev;
+
+ tmio->ccr = devm_ioremap(&dev->dev, ccr->start, resource_size(ccr));
+ if (!tmio->ccr)
+ return -EIO;
+
+ tmio->fcr_base = fcr->start & 0xfffff;
+ tmio->fcr = devm_ioremap(&dev->dev, fcr->start, resource_size(fcr));
+ if (!tmio->fcr)
+ return -EIO;
+
+ retval = tmio_hw_init(dev, tmio);
+ if (retval)
+ return retval;
+
+ /* Set address of NAND IO lines */
+ nand_chip->IO_ADDR_R = tmio->fcr;
+ nand_chip->IO_ADDR_W = tmio->fcr;
+
+ /* Set address of hardware control function */
+ nand_chip->cmd_ctrl = tmio_nand_hwcontrol;
+ nand_chip->dev_ready = tmio_nand_dev_ready;
+ nand_chip->read_byte = tmio_nand_read_byte;
+ nand_chip->write_buf = tmio_nand_write_buf;
+ nand_chip->read_buf = tmio_nand_read_buf;
+
+ /* set eccmode using hardware ECC */
+ nand_chip->ecc.mode = NAND_ECC_HW;
+ nand_chip->ecc.size = 512;
+ nand_chip->ecc.bytes = 6;
+ nand_chip->ecc.strength = 2;
+ nand_chip->ecc.hwctl = tmio_nand_enable_hwecc;
+ nand_chip->ecc.calculate = tmio_nand_calculate_ecc;
+ nand_chip->ecc.correct = tmio_nand_correct_data;
+
+ if (data)
+ nand_chip->badblock_pattern = data->badblock_pattern;
+
+ /* 15 us command delay time */
+ nand_chip->chip_delay = 15;
+
+ retval = devm_request_irq(&dev->dev, irq, &tmio_irq, 0,
+ dev_name(&dev->dev), tmio);
+ if (retval) {
+ dev_err(&dev->dev, "request_irq error %d\n", retval);
+ goto err_irq;
+ }
+
+ tmio->irq = irq;
+ nand_chip->waitfunc = tmio_nand_wait;
+
+ /* Scan to find existence of the device */
+ if (nand_scan(mtd, 1)) {
+ retval = -ENODEV;
+ goto err_irq;
+ }
+ /* Register the partitions */
+ retval = mtd_device_parse_register(mtd, NULL, NULL,
+ data ? data->partition : NULL,
+ data ? data->num_partitions : 0);
+ if (!retval)
+ return retval;
+
+ nand_release(mtd);
+
+err_irq:
+ tmio_hw_stop(dev, tmio);
+ return retval;
+}
+
+static int tmio_remove(struct platform_device *dev)
+{
+ struct tmio_nand *tmio = platform_get_drvdata(dev);
+
+ nand_release(&tmio->mtd);
+ tmio_hw_stop(dev, tmio);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int tmio_suspend(struct platform_device *dev, pm_message_t state)
+{
+ const struct mfd_cell *cell = mfd_get_cell(dev);
+
+ if (cell->suspend)
+ cell->suspend(dev);
+
+ tmio_hw_stop(dev, platform_get_drvdata(dev));
+ return 0;
+}
+
+static int tmio_resume(struct platform_device *dev)
+{
+ const struct mfd_cell *cell = mfd_get_cell(dev);
+
+ /* FIXME - is this required or merely another attack of the broken
+ * SHARP platform? Looks suspicious.
+ */
+ tmio_hw_init(dev, platform_get_drvdata(dev));
+
+ if (cell->resume)
+ cell->resume(dev);
+
+ return 0;
+}
+#else
+#define tmio_suspend NULL
+#define tmio_resume NULL
+#endif
+
+static struct platform_driver tmio_driver = {
+ .driver.name = "tmio-nand",
+ .driver.owner = THIS_MODULE,
+ .probe = tmio_probe,
+ .remove = tmio_remove,
+ .suspend = tmio_suspend,
+ .resume = tmio_resume,
+};
+
+module_platform_driver(tmio_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Ian Molton, Dirk Opfer, Chris Humbert, Dmitry Baryshkov");
+MODULE_DESCRIPTION("NAND flash driver on Toshiba Mobile IO controller");
+MODULE_ALIAS("platform:tmio-nand");
diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c
new file mode 100644
index 0000000..8572519
--- /dev/null
+++ b/drivers/mtd/nand/txx9ndfmc.c
@@ -0,0 +1,427 @@
+/*
+ * TXx9 NAND flash memory controller driver
+ * Based on RBTX49xx patch from CELF patch archive.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * (C) Copyright TOSHIBA CORPORATION 2004-2007
+ * All Rights Reserved.
+ */
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <asm/txx9/ndfmc.h>
+
+/* TXX9 NDFMC Registers */
+#define TXX9_NDFDTR 0x00
+#define TXX9_NDFMCR 0x04
+#define TXX9_NDFSR 0x08
+#define TXX9_NDFISR 0x0c
+#define TXX9_NDFIMR 0x10
+#define TXX9_NDFSPR 0x14
+#define TXX9_NDFRSTR 0x18 /* not TX4939 */
+
+/* NDFMCR : NDFMC Mode Control */
+#define TXX9_NDFMCR_WE 0x80
+#define TXX9_NDFMCR_ECC_ALL 0x60
+#define TXX9_NDFMCR_ECC_RESET 0x60
+#define TXX9_NDFMCR_ECC_READ 0x40
+#define TXX9_NDFMCR_ECC_ON 0x20
+#define TXX9_NDFMCR_ECC_OFF 0x00
+#define TXX9_NDFMCR_CE 0x10
+#define TXX9_NDFMCR_BSPRT 0x04 /* TX4925/TX4926 only */
+#define TXX9_NDFMCR_ALE 0x02
+#define TXX9_NDFMCR_CLE 0x01
+/* TX4939 only */
+#define TXX9_NDFMCR_X16 0x0400
+#define TXX9_NDFMCR_DMAREQ_MASK 0x0300
+#define TXX9_NDFMCR_DMAREQ_NODMA 0x0000
+#define TXX9_NDFMCR_DMAREQ_128 0x0100
+#define TXX9_NDFMCR_DMAREQ_256 0x0200
+#define TXX9_NDFMCR_DMAREQ_512 0x0300
+#define TXX9_NDFMCR_CS_MASK 0x0c
+#define TXX9_NDFMCR_CS(ch) ((ch) << 2)
+
+/* NDFMCR : NDFMC Status */
+#define TXX9_NDFSR_BUSY 0x80
+/* TX4939 only */
+#define TXX9_NDFSR_DMARUN 0x40
+
+/* NDFMCR : NDFMC Reset */
+#define TXX9_NDFRSTR_RST 0x01
+
+struct txx9ndfmc_priv {
+ struct platform_device *dev;
+ struct nand_chip chip;
+ struct mtd_info mtd;
+ int cs;
+ const char *mtdname;
+};
+
+#define MAX_TXX9NDFMC_DEV 4
+struct txx9ndfmc_drvdata {
+ struct mtd_info *mtds[MAX_TXX9NDFMC_DEV];
+ void __iomem *base;
+ unsigned char hold; /* in gbusclock */
+ unsigned char spw; /* in gbusclock */
+ struct nand_hw_control hw_control;
+};
+
+static struct platform_device *mtd_to_platdev(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct txx9ndfmc_priv *txx9_priv = chip->priv;
+ return txx9_priv->dev;
+}
+
+static void __iomem *ndregaddr(struct platform_device *dev, unsigned int reg)
+{
+ struct txx9ndfmc_drvdata *drvdata = platform_get_drvdata(dev);
+ struct txx9ndfmc_platform_data *plat = dev_get_platdata(&dev->dev);
+
+ return drvdata->base + (reg << plat->shift);
+}
+
+static u32 txx9ndfmc_read(struct platform_device *dev, unsigned int reg)
+{
+ return __raw_readl(ndregaddr(dev, reg));
+}
+
+static void txx9ndfmc_write(struct platform_device *dev,
+ u32 val, unsigned int reg)
+{
+ __raw_writel(val, ndregaddr(dev, reg));
+}
+
+static uint8_t txx9ndfmc_read_byte(struct mtd_info *mtd)
+{
+ struct platform_device *dev = mtd_to_platdev(mtd);
+
+ return txx9ndfmc_read(dev, TXX9_NDFDTR);
+}
+
+static void txx9ndfmc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+ int len)
+{
+ struct platform_device *dev = mtd_to_platdev(mtd);
+ void __iomem *ndfdtr = ndregaddr(dev, TXX9_NDFDTR);
+ u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR);
+
+ txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_WE, TXX9_NDFMCR);
+ while (len--)
+ __raw_writel(*buf++, ndfdtr);
+ txx9ndfmc_write(dev, mcr, TXX9_NDFMCR);
+}
+
+static void txx9ndfmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+ struct platform_device *dev = mtd_to_platdev(mtd);
+ void __iomem *ndfdtr = ndregaddr(dev, TXX9_NDFDTR);
+
+ while (len--)
+ *buf++ = __raw_readl(ndfdtr);
+}
+
+static void txx9ndfmc_cmd_ctrl(struct mtd_info *mtd, int cmd,
+ unsigned int ctrl)
+{
+ struct nand_chip *chip = mtd->priv;
+ struct txx9ndfmc_priv *txx9_priv = chip->priv;
+ struct platform_device *dev = txx9_priv->dev;
+ struct txx9ndfmc_platform_data *plat = dev_get_platdata(&dev->dev);
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR);
+
+ mcr &= ~(TXX9_NDFMCR_CLE | TXX9_NDFMCR_ALE | TXX9_NDFMCR_CE);
+ mcr |= ctrl & NAND_CLE ? TXX9_NDFMCR_CLE : 0;
+ mcr |= ctrl & NAND_ALE ? TXX9_NDFMCR_ALE : 0;
+ /* TXX9_NDFMCR_CE bit is 0:high 1:low */
+ mcr |= ctrl & NAND_NCE ? TXX9_NDFMCR_CE : 0;
+ if (txx9_priv->cs >= 0 && (ctrl & NAND_NCE)) {
+ mcr &= ~TXX9_NDFMCR_CS_MASK;
+ mcr |= TXX9_NDFMCR_CS(txx9_priv->cs);
+ }
+ txx9ndfmc_write(dev, mcr, TXX9_NDFMCR);
+ }
+ if (cmd != NAND_CMD_NONE)
+ txx9ndfmc_write(dev, cmd & 0xff, TXX9_NDFDTR);
+ if (plat->flags & NDFMC_PLAT_FLAG_DUMMYWRITE) {
+ /* dummy write to update external latch */
+ if ((ctrl & NAND_CTRL_CHANGE) && cmd == NAND_CMD_NONE)
+ txx9ndfmc_write(dev, 0, TXX9_NDFDTR);
+ }
+ mmiowb();
+}
+
+static int txx9ndfmc_dev_ready(struct mtd_info *mtd)
+{
+ struct platform_device *dev = mtd_to_platdev(mtd);
+
+ return !(txx9ndfmc_read(dev, TXX9_NDFSR) & TXX9_NDFSR_BUSY);
+}
+
+static int txx9ndfmc_calculate_ecc(struct mtd_info *mtd, const uint8_t *dat,
+ uint8_t *ecc_code)
+{
+ struct platform_device *dev = mtd_to_platdev(mtd);
+ struct nand_chip *chip = mtd->priv;
+ int eccbytes;
+ u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR);
+
+ mcr &= ~TXX9_NDFMCR_ECC_ALL;
+ txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
+ txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_READ, TXX9_NDFMCR);
+ for (eccbytes = chip->ecc.bytes; eccbytes > 0; eccbytes -= 3) {
+ ecc_code[1] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ ecc_code[0] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ ecc_code[2] = txx9ndfmc_read(dev, TXX9_NDFDTR);
+ ecc_code += 3;
+ }
+ txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
+ return 0;
+}
+
+static int txx9ndfmc_correct_data(struct mtd_info *mtd, unsigned char *buf,
+ unsigned char *read_ecc, unsigned char *calc_ecc)
+{
+ struct nand_chip *chip = mtd->priv;
+ int eccsize;
+ int corrected = 0;
+ int stat;
+
+ for (eccsize = chip->ecc.size; eccsize > 0; eccsize -= 256) {
+ stat = __nand_correct_data(buf, read_ecc, calc_ecc, 256);
+ if (stat < 0)
+ return stat;
+ corrected += stat;
+ buf += 256;
+ read_ecc += 3;
+ calc_ecc += 3;
+ }
+ return corrected;
+}
+
+static void txx9ndfmc_enable_hwecc(struct mtd_info *mtd, int mode)
+{
+ struct platform_device *dev = mtd_to_platdev(mtd);
+ u32 mcr = txx9ndfmc_read(dev, TXX9_NDFMCR);
+
+ mcr &= ~TXX9_NDFMCR_ECC_ALL;
+ txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_RESET, TXX9_NDFMCR);
+ txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_OFF, TXX9_NDFMCR);
+ txx9ndfmc_write(dev, mcr | TXX9_NDFMCR_ECC_ON, TXX9_NDFMCR);
+}
+
+static void txx9ndfmc_initialize(struct platform_device *dev)
+{
+ struct txx9ndfmc_platform_data *plat = dev_get_platdata(&dev->dev);
+ struct txx9ndfmc_drvdata *drvdata = platform_get_drvdata(dev);
+ int tmout = 100;
+
+ if (plat->flags & NDFMC_PLAT_FLAG_NO_RSTR)
+ ; /* no NDFRSTR. Write to NDFSPR resets the NDFMC. */
+ else {
+ /* reset NDFMC */
+ txx9ndfmc_write(dev,
+ txx9ndfmc_read(dev, TXX9_NDFRSTR) |
+ TXX9_NDFRSTR_RST,
+ TXX9_NDFRSTR);
+ while (txx9ndfmc_read(dev, TXX9_NDFRSTR) & TXX9_NDFRSTR_RST) {
+ if (--tmout == 0) {
+ dev_err(&dev->dev, "reset failed.\n");
+ break;
+ }
+ udelay(1);
+ }
+ }
+ /* setup Hold Time, Strobe Pulse Width */
+ txx9ndfmc_write(dev, (drvdata->hold << 4) | drvdata->spw, TXX9_NDFSPR);
+ txx9ndfmc_write(dev,
+ (plat->flags & NDFMC_PLAT_FLAG_USE_BSPRT) ?
+ TXX9_NDFMCR_BSPRT : 0, TXX9_NDFMCR);
+}
+
+#define TXX9NDFMC_NS_TO_CYC(gbusclk, ns) \
+ DIV_ROUND_UP((ns) * DIV_ROUND_UP(gbusclk, 1000), 1000000)
+
+static int txx9ndfmc_nand_scan(struct mtd_info *mtd)
+{
+ struct nand_chip *chip = mtd->priv;
+ int ret;
+
+ ret = nand_scan_ident(mtd, 1, NULL);
+ if (!ret) {
+ if (mtd->writesize >= 512) {
+ /* Hardware ECC 6 byte ECC per 512 Byte data */
+ chip->ecc.size = 512;
+ chip->ecc.bytes = 6;
+ }
+ ret = nand_scan_tail(mtd);
+ }
+ return ret;
+}
+
+static int __init txx9ndfmc_probe(struct platform_device *dev)
+{
+ struct txx9ndfmc_platform_data *plat = dev_get_platdata(&dev->dev);
+ int hold, spw;
+ int i;
+ struct txx9ndfmc_drvdata *drvdata;
+ unsigned long gbusclk = plat->gbus_clock;
+ struct resource *res;
+
+ drvdata = devm_kzalloc(&dev->dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+ res = platform_get_resource(dev, IORESOURCE_MEM, 0);
+ drvdata->base = devm_ioremap_resource(&dev->dev, res);
+ if (IS_ERR(drvdata->base))
+ return PTR_ERR(drvdata->base);
+
+ hold = plat->hold ?: 20; /* tDH */
+ spw = plat->spw ?: 90; /* max(tREADID, tWP, tRP) */
+
+ hold = TXX9NDFMC_NS_TO_CYC(gbusclk, hold);
+ spw = TXX9NDFMC_NS_TO_CYC(gbusclk, spw);
+ if (plat->flags & NDFMC_PLAT_FLAG_HOLDADD)
+ hold -= 2; /* actual hold time : (HOLD + 2) BUSCLK */
+ spw -= 1; /* actual wait time : (SPW + 1) BUSCLK */
+ hold = clamp(hold, 1, 15);
+ drvdata->hold = hold;
+ spw = clamp(spw, 1, 15);
+ drvdata->spw = spw;
+ dev_info(&dev->dev, "CLK:%ldMHz HOLD:%d SPW:%d\n",
+ (gbusclk + 500000) / 1000000, hold, spw);
+
+ spin_lock_init(&drvdata->hw_control.lock);
+ init_waitqueue_head(&drvdata->hw_control.wq);
+
+ platform_set_drvdata(dev, drvdata);
+ txx9ndfmc_initialize(dev);
+
+ for (i = 0; i < MAX_TXX9NDFMC_DEV; i++) {
+ struct txx9ndfmc_priv *txx9_priv;
+ struct nand_chip *chip;
+ struct mtd_info *mtd;
+
+ if (!(plat->ch_mask & (1 << i)))
+ continue;
+ txx9_priv = kzalloc(sizeof(struct txx9ndfmc_priv),
+ GFP_KERNEL);
+ if (!txx9_priv)
+ continue;
+ chip = &txx9_priv->chip;
+ mtd = &txx9_priv->mtd;
+ mtd->dev.parent = &dev->dev;
+
+ mtd->priv = chip;
+
+ chip->read_byte = txx9ndfmc_read_byte;
+ chip->read_buf = txx9ndfmc_read_buf;
+ chip->write_buf = txx9ndfmc_write_buf;
+ chip->cmd_ctrl = txx9ndfmc_cmd_ctrl;
+ chip->dev_ready = txx9ndfmc_dev_ready;
+ chip->ecc.calculate = txx9ndfmc_calculate_ecc;
+ chip->ecc.correct = txx9ndfmc_correct_data;
+ chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
+ chip->ecc.mode = NAND_ECC_HW;
+ /* txx9ndfmc_nand_scan will overwrite ecc.size and ecc.bytes */
+ chip->ecc.size = 256;
+ chip->ecc.bytes = 3;
+ chip->ecc.strength = 1;
+ chip->chip_delay = 100;
+ chip->controller = &drvdata->hw_control;
+
+ chip->priv = txx9_priv;
+ txx9_priv->dev = dev;
+
+ if (plat->ch_mask != 1) {
+ txx9_priv->cs = i;
+ txx9_priv->mtdname = kasprintf(GFP_KERNEL, "%s.%u",
+ dev_name(&dev->dev), i);
+ } else {
+ txx9_priv->cs = -1;
+ txx9_priv->mtdname = kstrdup(dev_name(&dev->dev),
+ GFP_KERNEL);
+ }
+ if (!txx9_priv->mtdname) {
+ kfree(txx9_priv);
+ dev_err(&dev->dev, "Unable to allocate MTD name.\n");
+ continue;
+ }
+ if (plat->wide_mask & (1 << i))
+ chip->options |= NAND_BUSWIDTH_16;
+
+ if (txx9ndfmc_nand_scan(mtd)) {
+ kfree(txx9_priv->mtdname);
+ kfree(txx9_priv);
+ continue;
+ }
+ mtd->name = txx9_priv->mtdname;
+
+ mtd_device_parse_register(mtd, NULL, NULL, NULL, 0);
+ drvdata->mtds[i] = mtd;
+ }
+
+ return 0;
+}
+
+static int __exit txx9ndfmc_remove(struct platform_device *dev)
+{
+ struct txx9ndfmc_drvdata *drvdata = platform_get_drvdata(dev);
+ int i;
+
+ if (!drvdata)
+ return 0;
+ for (i = 0; i < MAX_TXX9NDFMC_DEV; i++) {
+ struct mtd_info *mtd = drvdata->mtds[i];
+ struct nand_chip *chip;
+ struct txx9ndfmc_priv *txx9_priv;
+
+ if (!mtd)
+ continue;
+ chip = mtd->priv;
+ txx9_priv = chip->priv;
+
+ nand_release(mtd);
+ kfree(txx9_priv->mtdname);
+ kfree(txx9_priv);
+ }
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int txx9ndfmc_resume(struct platform_device *dev)
+{
+ if (platform_get_drvdata(dev))
+ txx9ndfmc_initialize(dev);
+ return 0;
+}
+#else
+#define txx9ndfmc_resume NULL
+#endif
+
+static struct platform_driver txx9ndfmc_driver = {
+ .remove = __exit_p(txx9ndfmc_remove),
+ .resume = txx9ndfmc_resume,
+ .driver = {
+ .name = "txx9ndfmc",
+ },
+};
+
+module_platform_driver_probe(txx9ndfmc_driver, txx9ndfmc_probe);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("TXx9 SoC NAND flash controller driver");
+MODULE_ALIAS("platform:txx9ndfmc");
diff --git a/drivers/mtd/nand/vf610_nfc.c b/drivers/mtd/nand/vf610_nfc.c
new file mode 100644
index 0000000..8805d63
--- /dev/null
+++ b/drivers/mtd/nand/vf610_nfc.c
@@ -0,0 +1,878 @@
+/*
+ * Copyright 2009-2015 Freescale Semiconductor, Inc. and others
+ *
+ * Description: MPC5125, VF610, MCF54418 and Kinetis K70 Nand driver.
+ * Jason ported to M54418TWR and MVFA5 (VF610).
+ * Authors: Stefan Agner <stefan.agner@toradex.com>
+ * Bill Pringlemeir <bpringlemeir@nbsps.com>
+ * Shaohui Xie <b21989@freescale.com>
+ * Jason Jin <Jason.jin@freescale.com>
+ *
+ * Based on original driver mpc5121_nfc.c.
+ *
+ * This is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * Limitations:
+ * - Untested on MPC5125 and M54418.
+ * - DMA and pipelining not used.
+ * - 2K pages or less.
+ * - HW ECC: Only 2K page with 64+ OOB.
+ * - HW ECC: Only 24 and 32-bit error correction implemented.
+ */
+
+#include <linux/module.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/of_mtd.h>
+#include <linux/of_device.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define DRV_NAME "vf610_nfc"
+
+/* Register Offsets */
+#define NFC_FLASH_CMD1 0x3F00
+#define NFC_FLASH_CMD2 0x3F04
+#define NFC_COL_ADDR 0x3F08
+#define NFC_ROW_ADDR 0x3F0c
+#define NFC_ROW_ADDR_INC 0x3F14
+#define NFC_FLASH_STATUS1 0x3F18
+#define NFC_FLASH_STATUS2 0x3F1c
+#define NFC_CACHE_SWAP 0x3F28
+#define NFC_SECTOR_SIZE 0x3F2c
+#define NFC_FLASH_CONFIG 0x3F30
+#define NFC_IRQ_STATUS 0x3F38
+
+/* Addresses for NFC MAIN RAM BUFFER areas */
+#define NFC_MAIN_AREA(n) ((n) * 0x1000)
+
+#define PAGE_2K 0x0800
+#define OOB_64 0x0040
+#define OOB_MAX 0x0100
+
+/*
+ * NFC_CMD2[CODE] values. See section:
+ * - 31.4.7 Flash Command Code Description, Vybrid manual
+ * - 23.8.6 Flash Command Sequencer, MPC5125 manual
+ *
+ * Briefly these are bitmasks of controller cycles.
+ */
+#define READ_PAGE_CMD_CODE 0x7EE0
+#define READ_ONFI_PARAM_CMD_CODE 0x4860
+#define PROGRAM_PAGE_CMD_CODE 0x7FC0
+#define ERASE_CMD_CODE 0x4EC0
+#define READ_ID_CMD_CODE 0x4804
+#define RESET_CMD_CODE 0x4040
+#define STATUS_READ_CMD_CODE 0x4068
+
+/* NFC ECC mode define */
+#define ECC_BYPASS 0
+#define ECC_45_BYTE 6
+#define ECC_60_BYTE 7
+
+/*** Register Mask and bit definitions */
+
+/* NFC_FLASH_CMD1 Field */
+#define CMD_BYTE2_MASK 0xFF000000
+#define CMD_BYTE2_SHIFT 24
+
+/* NFC_FLASH_CM2 Field */
+#define CMD_BYTE1_MASK 0xFF000000
+#define CMD_BYTE1_SHIFT 24
+#define CMD_CODE_MASK 0x00FFFF00
+#define CMD_CODE_SHIFT 8
+#define BUFNO_MASK 0x00000006
+#define BUFNO_SHIFT 1
+#define START_BIT BIT(0)
+
+/* NFC_COL_ADDR Field */
+#define COL_ADDR_MASK 0x0000FFFF
+#define COL_ADDR_SHIFT 0
+
+/* NFC_ROW_ADDR Field */
+#define ROW_ADDR_MASK 0x00FFFFFF
+#define ROW_ADDR_SHIFT 0
+#define ROW_ADDR_CHIP_SEL_RB_MASK 0xF0000000
+#define ROW_ADDR_CHIP_SEL_RB_SHIFT 28
+#define ROW_ADDR_CHIP_SEL_MASK 0x0F000000
+#define ROW_ADDR_CHIP_SEL_SHIFT 24
+
+/* NFC_FLASH_STATUS2 Field */
+#define STATUS_BYTE1_MASK 0x000000FF
+
+/* NFC_FLASH_CONFIG Field */
+#define CONFIG_ECC_SRAM_ADDR_MASK 0x7FC00000
+#define CONFIG_ECC_SRAM_ADDR_SHIFT 22
+#define CONFIG_ECC_SRAM_REQ_BIT BIT(21)
+#define CONFIG_DMA_REQ_BIT BIT(20)
+#define CONFIG_ECC_MODE_MASK 0x000E0000
+#define CONFIG_ECC_MODE_SHIFT 17
+#define CONFIG_FAST_FLASH_BIT BIT(16)
+#define CONFIG_16BIT BIT(7)
+#define CONFIG_BOOT_MODE_BIT BIT(6)
+#define CONFIG_ADDR_AUTO_INCR_BIT BIT(5)
+#define CONFIG_BUFNO_AUTO_INCR_BIT BIT(4)
+#define CONFIG_PAGE_CNT_MASK 0xF
+#define CONFIG_PAGE_CNT_SHIFT 0
+
+/* NFC_IRQ_STATUS Field */
+#define IDLE_IRQ_BIT BIT(29)
+#define IDLE_EN_BIT BIT(20)
+#define CMD_DONE_CLEAR_BIT BIT(18)
+#define IDLE_CLEAR_BIT BIT(17)
+
+/*
+ * ECC status - seems to consume 8 bytes (double word). The documented
+ * status byte is located in the lowest byte of the second word (which is
+ * the 4th or 7th byte depending on endianness).
+ * Calculate an offset to store the ECC status at the end of the buffer.
+ */
+#define ECC_SRAM_ADDR (PAGE_2K + OOB_MAX - 8)
+
+#define ECC_STATUS 0x4
+#define ECC_STATUS_MASK 0x80
+#define ECC_STATUS_ERR_COUNT 0x3F
+
+enum vf610_nfc_alt_buf {
+ ALT_BUF_DATA = 0,
+ ALT_BUF_ID = 1,
+ ALT_BUF_STAT = 2,
+ ALT_BUF_ONFI = 3,
+};
+
+enum vf610_nfc_variant {
+ NFC_VFC610 = 1,
+};
+
+struct vf610_nfc {
+ struct mtd_info mtd;
+ struct nand_chip chip;
+ struct device *dev;
+ void __iomem *regs;
+ struct completion cmd_done;
+ uint buf_offset;
+ int write_sz;
+ /* Status and ID are in alternate locations. */
+ enum vf610_nfc_alt_buf alt_buf;
+ enum vf610_nfc_variant variant;
+ struct clk *clk;
+ bool use_hw_ecc;
+ u32 ecc_mode;
+};
+
+#define mtd_to_nfc(_mtd) container_of(_mtd, struct vf610_nfc, mtd)
+
+static struct nand_ecclayout vf610_nfc_ecc45 = {
+ .eccbytes = 45,
+ .eccpos = {19, 20, 21, 22, 23,
+ 24, 25, 26, 27, 28, 29, 30, 31,
+ 32, 33, 34, 35, 36, 37, 38, 39,
+ 40, 41, 42, 43, 44, 45, 46, 47,
+ 48, 49, 50, 51, 52, 53, 54, 55,
+ 56, 57, 58, 59, 60, 61, 62, 63},
+ .oobfree = {
+ {.offset = 2,
+ .length = 17} }
+};
+
+static struct nand_ecclayout vf610_nfc_ecc60 = {
+ .eccbytes = 60,
+ .eccpos = { 4, 5, 6, 7, 8, 9, 10, 11,
+ 12, 13, 14, 15, 16, 17, 18, 19,
+ 20, 21, 22, 23, 24, 25, 26, 27,
+ 28, 29, 30, 31, 32, 33, 34, 35,
+ 36, 37, 38, 39, 40, 41, 42, 43,
+ 44, 45, 46, 47, 48, 49, 50, 51,
+ 52, 53, 54, 55, 56, 57, 58, 59,
+ 60, 61, 62, 63 },
+ .oobfree = {
+ {.offset = 2,
+ .length = 2} }
+};
+
+static inline u32 vf610_nfc_read(struct vf610_nfc *nfc, uint reg)
+{
+ return readl(nfc->regs + reg);
+}
+
+static inline void vf610_nfc_write(struct vf610_nfc *nfc, uint reg, u32 val)
+{
+ writel(val, nfc->regs + reg);
+}
+
+static inline void vf610_nfc_set(struct vf610_nfc *nfc, uint reg, u32 bits)
+{
+ vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) | bits);
+}
+
+static inline void vf610_nfc_clear(struct vf610_nfc *nfc, uint reg, u32 bits)
+{
+ vf610_nfc_write(nfc, reg, vf610_nfc_read(nfc, reg) & ~bits);
+}
+
+static inline void vf610_nfc_set_field(struct vf610_nfc *nfc, u32 reg,
+ u32 mask, u32 shift, u32 val)
+{
+ vf610_nfc_write(nfc, reg,
+ (vf610_nfc_read(nfc, reg) & (~mask)) | val << shift);
+}
+
+static inline void vf610_nfc_memcpy(void *dst, const void __iomem *src,
+ size_t n)
+{
+ /*
+ * Use this accessor for the internal SRAM buffers. On the ARM
+ * Freescale Vybrid SoC it's known that the driver can treat
+ * the SRAM buffer as if it's memory. Other platform might need
+ * to treat the buffers differently.
+ *
+ * For the time being, use memcpy
+ */
+ memcpy(dst, src, n);
+}
+
+/* Clear flags for upcoming command */
+static inline void vf610_nfc_clear_status(struct vf610_nfc *nfc)
+{
+ u32 tmp = vf610_nfc_read(nfc, NFC_IRQ_STATUS);
+
+ tmp |= CMD_DONE_CLEAR_BIT | IDLE_CLEAR_BIT;
+ vf610_nfc_write(nfc, NFC_IRQ_STATUS, tmp);
+}
+
+static void vf610_nfc_done(struct vf610_nfc *nfc)
+{
+ unsigned long timeout = msecs_to_jiffies(100);
+
+ /*
+ * Barrier is needed after this write. This write need
+ * to be done before reading the next register the first
+ * time.
+ * vf610_nfc_set implicates such a barrier by using writel
+ * to write to the register.
+ */
+ vf610_nfc_set(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
+ vf610_nfc_set(nfc, NFC_FLASH_CMD2, START_BIT);
+
+ if (!wait_for_completion_timeout(&nfc->cmd_done, timeout))
+ dev_warn(nfc->dev, "Timeout while waiting for BUSY.\n");
+
+ vf610_nfc_clear_status(nfc);
+}
+
+static u8 vf610_nfc_get_id(struct vf610_nfc *nfc, int col)
+{
+ u32 flash_id;
+
+ if (col < 4) {
+ flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS1);
+ flash_id >>= (3 - col) * 8;
+ } else {
+ flash_id = vf610_nfc_read(nfc, NFC_FLASH_STATUS2);
+ flash_id >>= 24;
+ }
+
+ return flash_id & 0xff;
+}
+
+static u8 vf610_nfc_get_status(struct vf610_nfc *nfc)
+{
+ return vf610_nfc_read(nfc, NFC_FLASH_STATUS2) & STATUS_BYTE1_MASK;
+}
+
+static void vf610_nfc_send_command(struct vf610_nfc *nfc, u32 cmd_byte1,
+ u32 cmd_code)
+{
+ u32 tmp;
+
+ vf610_nfc_clear_status(nfc);
+
+ tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD2);
+ tmp &= ~(CMD_BYTE1_MASK | CMD_CODE_MASK | BUFNO_MASK);
+ tmp |= cmd_byte1 << CMD_BYTE1_SHIFT;
+ tmp |= cmd_code << CMD_CODE_SHIFT;
+ vf610_nfc_write(nfc, NFC_FLASH_CMD2, tmp);
+}
+
+static void vf610_nfc_send_commands(struct vf610_nfc *nfc, u32 cmd_byte1,
+ u32 cmd_byte2, u32 cmd_code)
+{
+ u32 tmp;
+
+ vf610_nfc_send_command(nfc, cmd_byte1, cmd_code);
+
+ tmp = vf610_nfc_read(nfc, NFC_FLASH_CMD1);
+ tmp &= ~CMD_BYTE2_MASK;
+ tmp |= cmd_byte2 << CMD_BYTE2_SHIFT;
+ vf610_nfc_write(nfc, NFC_FLASH_CMD1, tmp);
+}
+
+static irqreturn_t vf610_nfc_irq(int irq, void *data)
+{
+ struct mtd_info *mtd = data;
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+
+ vf610_nfc_clear(nfc, NFC_IRQ_STATUS, IDLE_EN_BIT);
+ complete(&nfc->cmd_done);
+
+ return IRQ_HANDLED;
+}
+
+static void vf610_nfc_addr_cycle(struct vf610_nfc *nfc, int column, int page)
+{
+ if (column != -1) {
+ if (nfc->chip.options & NAND_BUSWIDTH_16)
+ column = column / 2;
+ vf610_nfc_set_field(nfc, NFC_COL_ADDR, COL_ADDR_MASK,
+ COL_ADDR_SHIFT, column);
+ }
+ if (page != -1)
+ vf610_nfc_set_field(nfc, NFC_ROW_ADDR, ROW_ADDR_MASK,
+ ROW_ADDR_SHIFT, page);
+}
+
+static inline void vf610_nfc_ecc_mode(struct vf610_nfc *nfc, int ecc_mode)
+{
+ vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
+ CONFIG_ECC_MODE_MASK,
+ CONFIG_ECC_MODE_SHIFT, ecc_mode);
+}
+
+static inline void vf610_nfc_transfer_size(struct vf610_nfc *nfc, int size)
+{
+ vf610_nfc_write(nfc, NFC_SECTOR_SIZE, size);
+}
+
+static void vf610_nfc_command(struct mtd_info *mtd, unsigned command,
+ int column, int page)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ int trfr_sz = nfc->chip.options & NAND_BUSWIDTH_16 ? 1 : 0;
+
+ nfc->buf_offset = max(column, 0);
+ nfc->alt_buf = ALT_BUF_DATA;
+
+ switch (command) {
+ case NAND_CMD_SEQIN:
+ /* Use valid column/page from preread... */
+ vf610_nfc_addr_cycle(nfc, column, page);
+ nfc->buf_offset = 0;
+
+ /*
+ * SEQIN => data => PAGEPROG sequence is done by the controller
+ * hence we do not need to issue the command here...
+ */
+ return;
+ case NAND_CMD_PAGEPROG:
+ trfr_sz += nfc->write_sz;
+ vf610_nfc_transfer_size(nfc, trfr_sz);
+ vf610_nfc_send_commands(nfc, NAND_CMD_SEQIN,
+ command, PROGRAM_PAGE_CMD_CODE);
+ if (nfc->use_hw_ecc)
+ vf610_nfc_ecc_mode(nfc, nfc->ecc_mode);
+ else
+ vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
+ break;
+
+ case NAND_CMD_RESET:
+ vf610_nfc_transfer_size(nfc, 0);
+ vf610_nfc_send_command(nfc, command, RESET_CMD_CODE);
+ break;
+
+ case NAND_CMD_READOOB:
+ trfr_sz += mtd->oobsize;
+ column = mtd->writesize;
+ vf610_nfc_transfer_size(nfc, trfr_sz);
+ vf610_nfc_send_commands(nfc, NAND_CMD_READ0,
+ NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
+ vf610_nfc_addr_cycle(nfc, column, page);
+ vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
+ break;
+
+ case NAND_CMD_READ0:
+ trfr_sz += mtd->writesize + mtd->oobsize;
+ vf610_nfc_transfer_size(nfc, trfr_sz);
+ vf610_nfc_send_commands(nfc, NAND_CMD_READ0,
+ NAND_CMD_READSTART, READ_PAGE_CMD_CODE);
+ vf610_nfc_addr_cycle(nfc, column, page);
+ vf610_nfc_ecc_mode(nfc, nfc->ecc_mode);
+ break;
+
+ case NAND_CMD_PARAM:
+ nfc->alt_buf = ALT_BUF_ONFI;
+ trfr_sz = 3 * sizeof(struct nand_onfi_params);
+ vf610_nfc_transfer_size(nfc, trfr_sz);
+ vf610_nfc_send_command(nfc, command, READ_ONFI_PARAM_CMD_CODE);
+ vf610_nfc_addr_cycle(nfc, -1, column);
+ vf610_nfc_ecc_mode(nfc, ECC_BYPASS);
+ break;
+
+ case NAND_CMD_ERASE1:
+ vf610_nfc_transfer_size(nfc, 0);
+ vf610_nfc_send_commands(nfc, command,
+ NAND_CMD_ERASE2, ERASE_CMD_CODE);
+ vf610_nfc_addr_cycle(nfc, column, page);
+ break;
+
+ case NAND_CMD_READID:
+ nfc->alt_buf = ALT_BUF_ID;
+ nfc->buf_offset = 0;
+ vf610_nfc_transfer_size(nfc, 0);
+ vf610_nfc_send_command(nfc, command, READ_ID_CMD_CODE);
+ vf610_nfc_addr_cycle(nfc, -1, column);
+ break;
+
+ case NAND_CMD_STATUS:
+ nfc->alt_buf = ALT_BUF_STAT;
+ vf610_nfc_transfer_size(nfc, 0);
+ vf610_nfc_send_command(nfc, command, STATUS_READ_CMD_CODE);
+ break;
+ default:
+ return;
+ }
+
+ vf610_nfc_done(nfc);
+
+ nfc->use_hw_ecc = false;
+ nfc->write_sz = 0;
+}
+
+static void vf610_nfc_read_buf(struct mtd_info *mtd, u_char *buf, int len)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ uint c = nfc->buf_offset;
+
+ /* Alternate buffers are only supported through read_byte */
+ WARN_ON(nfc->alt_buf);
+
+ vf610_nfc_memcpy(buf, nfc->regs + NFC_MAIN_AREA(0) + c, len);
+
+ nfc->buf_offset += len;
+}
+
+static void vf610_nfc_write_buf(struct mtd_info *mtd, const uint8_t *buf,
+ int len)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ uint c = nfc->buf_offset;
+ uint l;
+
+ l = min_t(uint, len, mtd->writesize + mtd->oobsize - c);
+ vf610_nfc_memcpy(nfc->regs + NFC_MAIN_AREA(0) + c, buf, l);
+
+ nfc->write_sz += l;
+ nfc->buf_offset += l;
+}
+
+static uint8_t vf610_nfc_read_byte(struct mtd_info *mtd)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ u8 tmp;
+ uint c = nfc->buf_offset;
+
+ switch (nfc->alt_buf) {
+ case ALT_BUF_ID:
+ tmp = vf610_nfc_get_id(nfc, c);
+ break;
+ case ALT_BUF_STAT:
+ tmp = vf610_nfc_get_status(nfc);
+ break;
+#ifdef __LITTLE_ENDIAN
+ case ALT_BUF_ONFI:
+ /* Reverse byte since the controller uses big endianness */
+ c = nfc->buf_offset ^ 0x3;
+ /* fall-through */
+#endif
+ default:
+ tmp = *((u8 *)(nfc->regs + NFC_MAIN_AREA(0) + c));
+ break;
+ }
+ nfc->buf_offset++;
+ return tmp;
+}
+
+static u16 vf610_nfc_read_word(struct mtd_info *mtd)
+{
+ u16 tmp;
+
+ vf610_nfc_read_buf(mtd, (u_char *)&tmp, sizeof(tmp));
+ return tmp;
+}
+
+/* If not provided, upper layers apply a fixed delay. */
+static int vf610_nfc_dev_ready(struct mtd_info *mtd)
+{
+ /* NFC handles R/B internally; always ready. */
+ return 1;
+}
+
+/*
+ * This function supports Vybrid only (MPC5125 would have full RB and four CS)
+ */
+static void vf610_nfc_select_chip(struct mtd_info *mtd, int chip)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ u32 tmp = vf610_nfc_read(nfc, NFC_ROW_ADDR);
+
+ /* Vybrid only (MPC5125 would have full RB and four CS) */
+ if (nfc->variant != NFC_VFC610)
+ return;
+
+ tmp &= ~(ROW_ADDR_CHIP_SEL_RB_MASK | ROW_ADDR_CHIP_SEL_MASK);
+
+ if (chip >= 0) {
+ tmp |= 1 << ROW_ADDR_CHIP_SEL_RB_SHIFT;
+ tmp |= BIT(chip) << ROW_ADDR_CHIP_SEL_SHIFT;
+ }
+
+ vf610_nfc_write(nfc, NFC_ROW_ADDR, tmp);
+}
+
+/* Count the number of 0's in buff up to max_bits */
+static inline int count_written_bits(uint8_t *buff, int size, int max_bits)
+{
+ uint32_t *buff32 = (uint32_t *)buff;
+ int k, written_bits = 0;
+
+ for (k = 0; k < (size / 4); k++) {
+ written_bits += hweight32(~buff32[k]);
+ if (unlikely(written_bits > max_bits))
+ break;
+ }
+
+ return written_bits;
+}
+
+static inline int vf610_nfc_correct_data(struct mtd_info *mtd, uint8_t *dat,
+ uint8_t *oob, int page)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+ u32 ecc_status_off = NFC_MAIN_AREA(0) + ECC_SRAM_ADDR + ECC_STATUS;
+ u8 ecc_status;
+ u8 ecc_count;
+ int flips_threshold = nfc->chip.ecc.strength / 2;
+
+ ecc_status = vf610_nfc_read(nfc, ecc_status_off) & 0xff;
+ ecc_count = ecc_status & ECC_STATUS_ERR_COUNT;
+
+ if (!(ecc_status & ECC_STATUS_MASK))
+ return ecc_count;
+
+ /* Read OOB without ECC unit enabled */
+ vf610_nfc_command(mtd, NAND_CMD_READOOB, 0, page);
+ vf610_nfc_read_buf(mtd, oob, mtd->oobsize);
+
+ /*
+ * On an erased page, bit count (including OOB) should be zero or
+ * at least less then half of the ECC strength.
+ */
+ return nand_check_erased_ecc_chunk(dat, nfc->chip.ecc.size, oob,
+ mtd->oobsize, NULL, 0,
+ flips_threshold);
+}
+
+static int vf610_nfc_read_page(struct mtd_info *mtd, struct nand_chip *chip,
+ uint8_t *buf, int oob_required, int page)
+{
+ int eccsize = chip->ecc.size;
+ int stat;
+
+ vf610_nfc_read_buf(mtd, buf, eccsize);
+ if (oob_required)
+ vf610_nfc_read_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ stat = vf610_nfc_correct_data(mtd, buf, chip->oob_poi, page);
+
+ if (stat < 0) {
+ mtd->ecc_stats.failed++;
+ return 0;
+ } else {
+ mtd->ecc_stats.corrected += stat;
+ return stat;
+ }
+}
+
+static int vf610_nfc_write_page(struct mtd_info *mtd, struct nand_chip *chip,
+ const uint8_t *buf, int oob_required, int page)
+{
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+
+ vf610_nfc_write_buf(mtd, buf, mtd->writesize);
+ if (oob_required)
+ vf610_nfc_write_buf(mtd, chip->oob_poi, mtd->oobsize);
+
+ /* Always write whole page including OOB due to HW ECC */
+ nfc->use_hw_ecc = true;
+ nfc->write_sz = mtd->writesize + mtd->oobsize;
+
+ return 0;
+}
+
+static const struct of_device_id vf610_nfc_dt_ids[] = {
+ { .compatible = "fsl,vf610-nfc", .data = (void *)NFC_VFC610 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, vf610_nfc_dt_ids);
+
+static void vf610_nfc_preinit_controller(struct vf610_nfc *nfc)
+{
+ vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
+ vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_ADDR_AUTO_INCR_BIT);
+ vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BUFNO_AUTO_INCR_BIT);
+ vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_BOOT_MODE_BIT);
+ vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_DMA_REQ_BIT);
+ vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_FAST_FLASH_BIT);
+
+ /* Disable virtual pages, only one elementary transfer unit */
+ vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG, CONFIG_PAGE_CNT_MASK,
+ CONFIG_PAGE_CNT_SHIFT, 1);
+}
+
+static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
+{
+ if (nfc->chip.options & NAND_BUSWIDTH_16)
+ vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
+ else
+ vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
+
+ if (nfc->chip.ecc.mode == NAND_ECC_HW) {
+ /* Set ECC status offset in SRAM */
+ vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
+ CONFIG_ECC_SRAM_ADDR_MASK,
+ CONFIG_ECC_SRAM_ADDR_SHIFT,
+ ECC_SRAM_ADDR >> 3);
+
+ /* Enable ECC status in SRAM */
+ vf610_nfc_set(nfc, NFC_FLASH_CONFIG, CONFIG_ECC_SRAM_REQ_BIT);
+ }
+}
+
+static int vf610_nfc_probe(struct platform_device *pdev)
+{
+ struct vf610_nfc *nfc;
+ struct resource *res;
+ struct mtd_info *mtd;
+ struct nand_chip *chip;
+ struct device_node *child;
+ const struct of_device_id *of_id;
+ int err;
+ int irq;
+
+ nfc = devm_kzalloc(&pdev->dev, sizeof(*nfc), GFP_KERNEL);
+ if (!nfc)
+ return -ENOMEM;
+
+ nfc->dev = &pdev->dev;
+ mtd = &nfc->mtd;
+ chip = &nfc->chip;
+
+ mtd->priv = chip;
+ mtd->owner = THIS_MODULE;
+ mtd->dev.parent = nfc->dev;
+ mtd->name = DRV_NAME;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0)
+ return -EINVAL;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ nfc->regs = devm_ioremap_resource(nfc->dev, res);
+ if (IS_ERR(nfc->regs))
+ return PTR_ERR(nfc->regs);
+
+ nfc->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(nfc->clk))
+ return PTR_ERR(nfc->clk);
+
+ err = clk_prepare_enable(nfc->clk);
+ if (err) {
+ dev_err(nfc->dev, "Unable to enable clock!\n");
+ return err;
+ }
+
+ of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
+ nfc->variant = (enum vf610_nfc_variant)of_id->data;
+
+ for_each_available_child_of_node(nfc->dev->of_node, child) {
+ if (of_device_is_compatible(child, "fsl,vf610-nfc-nandcs")) {
+
+ if (chip->flash_node) {
+ dev_err(nfc->dev,
+ "Only one NAND chip supported!\n");
+ err = -EINVAL;
+ goto error;
+ }
+
+ chip->flash_node = child;
+ }
+ }
+
+ if (!chip->flash_node) {
+ dev_err(nfc->dev, "NAND chip sub-node missing!\n");
+ err = -ENODEV;
+ goto err_clk;
+ }
+
+ chip->dev_ready = vf610_nfc_dev_ready;
+ chip->cmdfunc = vf610_nfc_command;
+ chip->read_byte = vf610_nfc_read_byte;
+ chip->read_word = vf610_nfc_read_word;
+ chip->read_buf = vf610_nfc_read_buf;
+ chip->write_buf = vf610_nfc_write_buf;
+ chip->select_chip = vf610_nfc_select_chip;
+
+ chip->options |= NAND_NO_SUBPAGE_WRITE;
+
+ init_completion(&nfc->cmd_done);
+
+ err = devm_request_irq(nfc->dev, irq, vf610_nfc_irq, 0, DRV_NAME, mtd);
+ if (err) {
+ dev_err(nfc->dev, "Error requesting IRQ!\n");
+ goto error;
+ }
+
+ vf610_nfc_preinit_controller(nfc);
+
+ /* first scan to find the device and get the page size */
+ if (nand_scan_ident(mtd, 1, NULL)) {
+ err = -ENXIO;
+ goto error;
+ }
+
+ vf610_nfc_init_controller(nfc);
+
+ /* Bad block options. */
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
+ chip->bbt_options |= NAND_BBT_NO_OOB;
+
+ /* Single buffer only, max 256 OOB minus ECC status */
+ if (mtd->writesize + mtd->oobsize > PAGE_2K + OOB_MAX - 8) {
+ dev_err(nfc->dev, "Unsupported flash page size\n");
+ err = -ENXIO;
+ goto error;
+ }
+
+ if (chip->ecc.mode == NAND_ECC_HW) {
+ if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
+ dev_err(nfc->dev, "Unsupported flash with hwecc\n");
+ err = -ENXIO;
+ goto error;
+ }
+
+ if (chip->ecc.size != mtd->writesize) {
+ dev_err(nfc->dev, "Step size needs to be page size\n");
+ err = -ENXIO;
+ goto error;
+ }
+
+ /* Only 64 byte ECC layouts known */
+ if (mtd->oobsize > 64)
+ mtd->oobsize = 64;
+
+ if (chip->ecc.strength == 32) {
+ nfc->ecc_mode = ECC_60_BYTE;
+ chip->ecc.bytes = 60;
+ chip->ecc.layout = &vf610_nfc_ecc60;
+ } else if (chip->ecc.strength == 24) {
+ nfc->ecc_mode = ECC_45_BYTE;
+ chip->ecc.bytes = 45;
+ chip->ecc.layout = &vf610_nfc_ecc45;
+ } else {
+ dev_err(nfc->dev, "Unsupported ECC strength\n");
+ err = -ENXIO;
+ goto error;
+ }
+
+ /* propagate ecc.layout to mtd_info */
+ mtd->ecclayout = chip->ecc.layout;
+ chip->ecc.read_page = vf610_nfc_read_page;
+ chip->ecc.write_page = vf610_nfc_write_page;
+
+ chip->ecc.size = PAGE_2K;
+ }
+
+ /* second phase scan */
+ if (nand_scan_tail(mtd)) {
+ err = -ENXIO;
+ goto error;
+ }
+
+ platform_set_drvdata(pdev, mtd);
+
+ /* Register device in MTD */
+ return mtd_device_parse_register(mtd, NULL,
+ &(struct mtd_part_parser_data){
+ .of_node = chip->flash_node,
+ },
+ NULL, 0);
+
+error:
+ of_node_put(chip->flash_node);
+err_clk:
+ clk_disable_unprepare(nfc->clk);
+ return err;
+}
+
+static int vf610_nfc_remove(struct platform_device *pdev)
+{
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+
+ nand_release(mtd);
+ clk_disable_unprepare(nfc->clk);
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int vf610_nfc_suspend(struct device *dev)
+{
+ struct mtd_info *mtd = dev_get_drvdata(dev);
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+
+ clk_disable_unprepare(nfc->clk);
+ return 0;
+}
+
+static int vf610_nfc_resume(struct device *dev)
+{
+ struct mtd_info *mtd = dev_get_drvdata(dev);
+ struct vf610_nfc *nfc = mtd_to_nfc(mtd);
+
+ pinctrl_pm_select_default_state(dev);
+
+ clk_prepare_enable(nfc->clk);
+
+ vf610_nfc_preinit_controller(nfc);
+ vf610_nfc_init_controller(nfc);
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(vf610_nfc_pm_ops, vf610_nfc_suspend, vf610_nfc_resume);
+
+static struct platform_driver vf610_nfc_driver = {
+ .driver = {
+ .name = DRV_NAME,
+ .of_match_table = vf610_nfc_dt_ids,
+ .pm = &vf610_nfc_pm_ops,
+ },
+ .probe = vf610_nfc_probe,
+ .remove = vf610_nfc_remove,
+};
+
+module_platform_driver(vf610_nfc_driver);
+
+MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
+MODULE_DESCRIPTION("Freescale VF610/MPC5125 NFC MTD NAND driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c
new file mode 100644
index 0000000..3b28db4
--- /dev/null
+++ b/drivers/mtd/nand/xway_nand.c
@@ -0,0 +1,197 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * Copyright © 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/mtd/nand.h>
+#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+
+#include <lantiq_soc.h>
+
+/* nand registers */
+#define EBU_ADDSEL1 0x24
+#define EBU_NAND_CON 0xB0
+#define EBU_NAND_WAIT 0xB4
+#define EBU_NAND_ECC0 0xB8
+#define EBU_NAND_ECC_AC 0xBC
+
+/* nand commands */
+#define NAND_CMD_ALE (1 << 2)
+#define NAND_CMD_CLE (1 << 3)
+#define NAND_CMD_CS (1 << 4)
+#define NAND_WRITE_CMD_RESET 0xff
+#define NAND_WRITE_CMD (NAND_CMD_CS | NAND_CMD_CLE)
+#define NAND_WRITE_ADDR (NAND_CMD_CS | NAND_CMD_ALE)
+#define NAND_WRITE_DATA (NAND_CMD_CS)
+#define NAND_READ_DATA (NAND_CMD_CS)
+#define NAND_WAIT_WR_C (1 << 3)
+#define NAND_WAIT_RD (0x1)
+
+/* we need to tel the ebu which addr we mapped the nand to */
+#define ADDSEL1_MASK(x) (x << 4)
+#define ADDSEL1_REGEN 1
+
+/* we need to tell the EBU that we have nand attached and set it up properly */
+#define BUSCON1_SETUP (1 << 22)
+#define BUSCON1_BCGEN_RES (0x3 << 12)
+#define BUSCON1_WAITWRC2 (2 << 8)
+#define BUSCON1_WAITRDC2 (2 << 6)
+#define BUSCON1_HOLDC1 (1 << 4)
+#define BUSCON1_RECOVC1 (1 << 2)
+#define BUSCON1_CMULT4 1
+
+#define NAND_CON_CE (1 << 20)
+#define NAND_CON_OUT_CS1 (1 << 10)
+#define NAND_CON_IN_CS1 (1 << 8)
+#define NAND_CON_PRE_P (1 << 7)
+#define NAND_CON_WP_P (1 << 6)
+#define NAND_CON_SE_P (1 << 5)
+#define NAND_CON_CS_P (1 << 4)
+#define NAND_CON_CSMUX (1 << 1)
+#define NAND_CON_NANDM 1
+
+static void xway_reset_chip(struct nand_chip *chip)
+{
+ unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W;
+ unsigned long flags;
+
+ nandaddr &= ~NAND_WRITE_ADDR;
+ nandaddr |= NAND_WRITE_CMD;
+
+ /* finish with a reset */
+ spin_lock_irqsave(&ebu_lock, flags);
+ writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr);
+ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+ ;
+ spin_unlock_irqrestore(&ebu_lock, flags);
+}
+
+static void xway_select_chip(struct mtd_info *mtd, int chip)
+{
+
+ switch (chip) {
+ case -1:
+ ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON);
+ ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON);
+ break;
+ case 0:
+ ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON);
+ ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON);
+ break;
+ default:
+ BUG();
+ }
+}
+
+static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+ unsigned long flags;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR);
+ if (ctrl & NAND_CLE)
+ nandaddr |= NAND_WRITE_CMD;
+ else
+ nandaddr |= NAND_WRITE_ADDR;
+ this->IO_ADDR_W = (void __iomem *) nandaddr;
+ }
+
+ if (cmd != NAND_CMD_NONE) {
+ spin_lock_irqsave(&ebu_lock, flags);
+ writeb(cmd, this->IO_ADDR_W);
+ while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0)
+ ;
+ spin_unlock_irqrestore(&ebu_lock, flags);
+ }
+}
+
+static int xway_dev_ready(struct mtd_info *mtd)
+{
+ return ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD;
+}
+
+static unsigned char xway_read_byte(struct mtd_info *mtd)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_R;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&ebu_lock, flags);
+ ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA));
+ spin_unlock_irqrestore(&ebu_lock, flags);
+
+ return ret;
+}
+
+static int xway_nand_probe(struct platform_device *pdev)
+{
+ struct nand_chip *this = platform_get_drvdata(pdev);
+ unsigned long nandaddr = (unsigned long) this->IO_ADDR_W;
+ const __be32 *cs = of_get_property(pdev->dev.of_node,
+ "lantiq,cs", NULL);
+ u32 cs_flag = 0;
+
+ /* load our CS from the DT. Either we find a valid 1 or default to 0 */
+ if (cs && (*cs == 1))
+ cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1;
+
+ /* setup the EBU to run in NAND mode on our base addr */
+ ltq_ebu_w32(CPHYSADDR(nandaddr)
+ | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1);
+
+ ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2
+ | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1
+ | BUSCON1_CMULT4, LTQ_EBU_BUSCON1);
+
+ ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P
+ | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P
+ | cs_flag, EBU_NAND_CON);
+
+ /* finish with a reset */
+ xway_reset_chip(this);
+
+ return 0;
+}
+
+static struct platform_nand_data xway_nand_data = {
+ .chip = {
+ .nr_chips = 1,
+ .chip_delay = 30,
+ },
+ .ctrl = {
+ .probe = xway_nand_probe,
+ .cmd_ctrl = xway_cmd_ctrl,
+ .dev_ready = xway_dev_ready,
+ .select_chip = xway_select_chip,
+ .read_byte = xway_read_byte,
+ }
+};
+
+/*
+ * Try to find the node inside the DT. If it is available attach out
+ * platform_nand_data
+ */
+static int __init xway_register_nand(void)
+{
+ struct device_node *node;
+ struct platform_device *pdev;
+
+ node = of_find_compatible_node(NULL, NULL, "lantiq,nand-xway");
+ if (!node)
+ return -ENOENT;
+ pdev = of_find_device_by_node(node);
+ if (!pdev)
+ return -EINVAL;
+ pdev->dev.platform_data = &xway_nand_data;
+ of_node_put(node);
+ return 0;
+}
+
+subsys_initcall(xway_register_nand);