File-copy from v4.4.100
This is the result of 'cp' from a linux-stable tree with the 'v4.4.100'
tag checked out (commit 26d6298789e695c9f627ce49a7bbd2286405798a) on
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Please refer to that tree for all history prior to this point.
Change-Id: I8a9ee2aea93cd29c52c847d0ce33091a73ae6afe
diff --git a/drivers/net/irda/nsc-ircc.h b/drivers/net/irda/nsc-ircc.h
new file mode 100644
index 0000000..7be5acb
--- /dev/null
+++ b/drivers/net/irda/nsc-ircc.h
@@ -0,0 +1,281 @@
+/*********************************************************************
+ *
+ * Filename: nsc-ircc.h
+ * Version:
+ * Description:
+ * Status: Experimental.
+ * Author: Dag Brattli <dagb@cs.uit.no>
+ * Created at: Fri Nov 13 14:37:40 1998
+ * Modified at: Sun Jan 23 17:47:00 2000
+ * Modified by: Dag Brattli <dagb@cs.uit.no>
+ *
+ * Copyright (c) 1998-2000 Dag Brattli <dagb@cs.uit.no>
+ * Copyright (c) 1998 Lichen Wang, <lwang@actisys.com>
+ * Copyright (c) 1998 Actisys Corp., www.actisys.com
+ * All Rights Reserved
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * Neither Dag Brattli nor University of Tromsø admit liability nor
+ * provide warranty for any of this software. This material is
+ * provided "AS-IS" and at no charge.
+ *
+ ********************************************************************/
+
+#ifndef NSC_IRCC_H
+#define NSC_IRCC_H
+
+#include <linux/ktime.h>
+
+#include <linux/spinlock.h>
+#include <linux/pm.h>
+#include <linux/types.h>
+#include <asm/io.h>
+
+/* Features for chips (set in driver_data) */
+#define NSC_FORCE_DONGLE_TYPE9 0x00000001
+
+/* DMA modes needed */
+#define DMA_TX_MODE 0x08 /* Mem to I/O, ++, demand. */
+#define DMA_RX_MODE 0x04 /* I/O to mem, ++, demand. */
+
+/* Config registers for the '108 */
+#define CFG_108_BAIC 0x00
+#define CFG_108_CSRT 0x01
+#define CFG_108_MCTL 0x02
+
+/* Config registers for the '338 */
+#define CFG_338_FER 0x00
+#define CFG_338_FAR 0x01
+#define CFG_338_PTR 0x02
+#define CFG_338_PNP0 0x1b
+#define CFG_338_PNP1 0x1c
+#define CFG_338_PNP3 0x4f
+
+/* Config registers for the '39x (in the logical device bank) */
+#define CFG_39X_LDN 0x07 /* Logical device number (Super I/O bank) */
+#define CFG_39X_SIOCF1 0x21 /* SuperI/O Config */
+#define CFG_39X_ACT 0x30 /* Device activation */
+#define CFG_39X_BASEH 0x60 /* Device base address (high bits) */
+#define CFG_39X_BASEL 0x61 /* Device base address (low bits) */
+#define CFG_39X_IRQNUM 0x70 /* Interrupt number & wake up enable */
+#define CFG_39X_IRQSEL 0x71 /* Interrupt select (edge/level + polarity) */
+#define CFG_39X_DMA0 0x74 /* DMA 0 configuration */
+#define CFG_39X_DMA1 0x75 /* DMA 1 configuration */
+#define CFG_39X_SPC 0xF0 /* Serial port configuration register */
+
+/* Flags for configuration register CRF0 */
+#define APEDCRC 0x02
+#define ENBNKSEL 0x01
+
+/* Set 0 */
+#define TXD 0x00 /* Transmit data port */
+#define RXD 0x00 /* Receive data port */
+
+/* Register 1 */
+#define IER 0x01 /* Interrupt Enable Register*/
+#define IER_RXHDL_IE 0x01 /* Receiver high data level interrupt */
+#define IER_TXLDL_IE 0x02 /* Transeiver low data level interrupt */
+#define IER_LS_IE 0x04//* Link Status Interrupt */
+#define IER_ETXURI 0x04 /* Tx underrun */
+#define IER_DMA_IE 0x10 /* DMA finished interrupt */
+#define IER_TXEMP_IE 0x20
+#define IER_SFIF_IE 0x40 /* Frame status FIFO intr */
+#define IER_TMR_IE 0x80 /* Timer event */
+
+#define FCR 0x02 /* (write only) */
+#define FCR_FIFO_EN 0x01 /* Enable FIFO's */
+#define FCR_RXSR 0x02 /* Rx FIFO soft reset */
+#define FCR_TXSR 0x04 /* Tx FIFO soft reset */
+#define FCR_RXTH 0x40 /* Rx FIFO threshold (set to 16) */
+#define FCR_TXTH 0x20 /* Tx FIFO threshold (set to 17) */
+
+#define EIR 0x02 /* (read only) */
+#define EIR_RXHDL_EV 0x01
+#define EIR_TXLDL_EV 0x02
+#define EIR_LS_EV 0x04
+#define EIR_DMA_EV 0x10
+#define EIR_TXEMP_EV 0x20
+#define EIR_SFIF_EV 0x40
+#define EIR_TMR_EV 0x80
+
+#define LCR 0x03 /* Link control register */
+#define LCR_WLS_8 0x03 /* 8 bits */
+
+#define BSR 0x03 /* Bank select register */
+#define BSR_BKSE 0x80
+#define BANK0 LCR_WLS_8 /* Must make sure that we set 8N1 */
+#define BANK1 0x80
+#define BANK2 0xe0
+#define BANK3 0xe4
+#define BANK4 0xe8
+#define BANK5 0xec
+#define BANK6 0xf0
+#define BANK7 0xf4
+
+#define MCR 0x04 /* Mode Control Register */
+#define MCR_MODE_MASK ~(0xd0)
+#define MCR_UART 0x00
+#define MCR_RESERVED 0x20
+#define MCR_SHARP_IR 0x40
+#define MCR_SIR 0x60
+#define MCR_MIR 0x80
+#define MCR_FIR 0xa0
+#define MCR_CEIR 0xb0
+#define MCR_IR_PLS 0x10
+#define MCR_DMA_EN 0x04
+#define MCR_EN_IRQ 0x08
+#define MCR_TX_DFR 0x08
+
+#define LSR 0x05 /* Link status register */
+#define LSR_RXDA 0x01 /* Receiver data available */
+#define LSR_TXRDY 0x20 /* Transmitter ready */
+#define LSR_TXEMP 0x40 /* Transmitter empty */
+
+#define ASCR 0x07 /* Auxiliary Status and Control Register */
+#define ASCR_RXF_TOUT 0x01 /* Rx FIFO timeout */
+#define ASCR_FEND_INF 0x02 /* Frame end bytes in rx FIFO */
+#define ASCR_S_EOT 0x04 /* Set end of transmission */
+#define ASCT_RXBSY 0x20 /* Rx busy */
+#define ASCR_TXUR 0x40 /* Transeiver underrun */
+#define ASCR_CTE 0x80 /* Clear timer event */
+
+/* Bank 2 */
+#define BGDL 0x00 /* Baud Generator Divisor Port (Low Byte) */
+#define BGDH 0x01 /* Baud Generator Divisor Port (High Byte) */
+
+#define ECR1 0x02 /* Extended Control Register 1 */
+#define ECR1_EXT_SL 0x01 /* Extended Mode Select */
+#define ECR1_DMANF 0x02 /* DMA Fairness */
+#define ECR1_DMATH 0x04 /* DMA Threshold */
+#define ECR1_DMASWP 0x08 /* DMA Swap */
+
+#define EXCR2 0x04
+#define EXCR2_TFSIZ 0x01 /* Rx FIFO size = 32 */
+#define EXCR2_RFSIZ 0x04 /* Tx FIFO size = 32 */
+
+#define TXFLV 0x06 /* Tx FIFO level */
+#define RXFLV 0x07 /* Rx FIFO level */
+
+/* Bank 3 */
+#define MID 0x00
+
+/* Bank 4 */
+#define TMRL 0x00 /* Timer low byte */
+#define TMRH 0x01 /* Timer high byte */
+#define IRCR1 0x02 /* Infrared control register 1 */
+#define IRCR1_TMR_EN 0x01 /* Timer enable */
+
+#define TFRLL 0x04
+#define TFRLH 0x05
+#define RFRLL 0x06
+#define RFRLH 0x07
+
+/* Bank 5 */
+#define IRCR2 0x04 /* Infrared control register 2 */
+#define IRCR2_MDRS 0x04 /* MIR data rate select */
+#define IRCR2_FEND_MD 0x20 /* */
+
+#define FRM_ST 0x05 /* Frame status FIFO */
+#define FRM_ST_VLD 0x80 /* Frame status FIFO data valid */
+#define FRM_ST_ERR_MSK 0x5f
+#define FRM_ST_LOST_FR 0x40 /* Frame lost */
+#define FRM_ST_MAX_LEN 0x10 /* Max frame len exceeded */
+#define FRM_ST_PHY_ERR 0x08 /* Physical layer error */
+#define FRM_ST_BAD_CRC 0x04
+#define FRM_ST_OVR1 0x02 /* Rx FIFO overrun */
+#define FRM_ST_OVR2 0x01 /* Frame status FIFO overrun */
+
+#define RFLFL 0x06
+#define RFLFH 0x07
+
+/* Bank 6 */
+#define IR_CFG2 0x00
+#define IR_CFG2_DIS_CRC 0x02
+
+/* Bank 7 */
+#define IRM_CR 0x07 /* Infrared module control register */
+#define IRM_CR_IRX_MSL 0x40
+#define IRM_CR_AF_MNT 0x80 /* Automatic format */
+
+/* NSC chip information */
+struct nsc_chip {
+ char *name; /* Name of chipset */
+ int cfg[3]; /* Config registers */
+ u_int8_t cid_index; /* Chip identification index reg */
+ u_int8_t cid_value; /* Chip identification expected value */
+ u_int8_t cid_mask; /* Chip identification revision mask */
+
+ /* Functions for probing and initializing the specific chip */
+ int (*probe)(struct nsc_chip *chip, chipio_t *info);
+ int (*init)(struct nsc_chip *chip, chipio_t *info);
+};
+typedef struct nsc_chip nsc_chip_t;
+
+/* For storing entries in the status FIFO */
+struct st_fifo_entry {
+ int status;
+ int len;
+};
+
+#define MAX_TX_WINDOW 7
+#define MAX_RX_WINDOW 7
+
+struct st_fifo {
+ struct st_fifo_entry entries[MAX_RX_WINDOW];
+ int pending_bytes;
+ int head;
+ int tail;
+ int len;
+};
+
+struct frame_cb {
+ void *start; /* Start of frame in DMA mem */
+ int len; /* Length of frame in DMA mem */
+};
+
+struct tx_fifo {
+ struct frame_cb queue[MAX_TX_WINDOW]; /* Info about frames in queue */
+ int ptr; /* Currently being sent */
+ int len; /* Length of queue */
+ int free; /* Next free slot */
+ void *tail; /* Next free start in DMA mem */
+};
+
+/* Private data for each instance */
+struct nsc_ircc_cb {
+ struct st_fifo st_fifo; /* Info about received frames */
+ struct tx_fifo tx_fifo; /* Info about frames to be transmitted */
+
+ struct net_device *netdev; /* Yes! we are some kind of netdevice */
+
+ struct irlap_cb *irlap; /* The link layer we are binded to */
+ struct qos_info qos; /* QoS capabilities for this device */
+
+ chipio_t io; /* IrDA controller information */
+ iobuff_t tx_buff; /* Transmit buffer */
+ iobuff_t rx_buff; /* Receive buffer */
+ dma_addr_t tx_buff_dma;
+ dma_addr_t rx_buff_dma;
+
+ __u8 ier; /* Interrupt enable register */
+
+ ktime_t stamp;
+
+ spinlock_t lock; /* For serializing operations */
+
+ __u32 new_speed;
+ int index; /* Instance index */
+
+ struct platform_device *pldev;
+};
+
+static inline void switch_bank(int iobase, int bank)
+{
+ outb(bank, iobase+BSR);
+}
+
+#endif /* NSC_IRCC_H */