File-copy from v4.4.100

This is the result of 'cp' from a linux-stable tree with the 'v4.4.100'
tag checked out (commit 26d6298789e695c9f627ce49a7bbd2286405798a) on
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git

Please refer to that tree for all history prior to this point.

Change-Id: I8a9ee2aea93cd29c52c847d0ce33091a73ae6afe
diff --git a/drivers/net/wireless/libertas/host.h b/drivers/net/wireless/libertas/host.h
new file mode 100644
index 0000000..96726f7
--- /dev/null
+++ b/drivers/net/wireless/libertas/host.h
@@ -0,0 +1,978 @@
+/*
+ * This file function prototypes, data structure
+ * and  definitions for all the host/station commands
+ */
+
+#ifndef _LBS_HOST_H_
+#define _LBS_HOST_H_
+
+#include "types.h"
+#include "defs.h"
+
+#define DEFAULT_AD_HOC_CHANNEL                  6
+
+#define CMD_OPTION_WAITFORRSP                   0x0002
+
+/* Host command IDs */
+
+/*
+ * Return command are almost always the same as the host command, but with
+ * bit 15 set high.  There are a few exceptions, though...
+ */
+#define CMD_RET(cmd)                            (0x8000 | cmd)
+
+/* Return command convention exceptions: */
+#define CMD_RET_802_11_ASSOCIATE                0x8012
+
+/* Command codes */
+#define CMD_GET_HW_SPEC                         0x0003
+#define CMD_EEPROM_UPDATE                       0x0004
+#define CMD_802_11_RESET                        0x0005
+#define CMD_802_11_SCAN                         0x0006
+#define CMD_802_11_GET_LOG                      0x000b
+#define CMD_MAC_MULTICAST_ADR                   0x0010
+#define CMD_802_11_AUTHENTICATE                 0x0011
+#define CMD_802_11_EEPROM_ACCESS                0x0059
+#define CMD_802_11_ASSOCIATE                    0x0050
+#define CMD_802_11_SET_WEP                      0x0013
+#define CMD_802_11_GET_STAT                     0x0014
+#define CMD_802_3_GET_STAT                      0x0015
+#define CMD_802_11_SNMP_MIB                     0x0016
+#define CMD_MAC_REG_MAP                         0x0017
+#define CMD_BBP_REG_MAP                         0x0018
+#define CMD_MAC_REG_ACCESS                      0x0019
+#define CMD_BBP_REG_ACCESS                      0x001a
+#define CMD_RF_REG_ACCESS                       0x001b
+#define CMD_802_11_RADIO_CONTROL                0x001c
+#define CMD_802_11_RF_CHANNEL                   0x001d
+#define CMD_802_11_RF_TX_POWER                  0x001e
+#define CMD_802_11_RSSI                         0x001f
+#define CMD_802_11_RF_ANTENNA                   0x0020
+#define CMD_802_11_PS_MODE                      0x0021
+#define CMD_802_11_DATA_RATE                    0x0022
+#define CMD_RF_REG_MAP                          0x0023
+#define CMD_802_11_DEAUTHENTICATE               0x0024
+#define CMD_802_11_REASSOCIATE                  0x0025
+#define CMD_MAC_CONTROL                         0x0028
+#define CMD_802_11_AD_HOC_START                 0x002b
+#define CMD_802_11_AD_HOC_JOIN                  0x002c
+#define CMD_802_11_QUERY_TKIP_REPLY_CNTRS       0x002e
+#define CMD_802_11_ENABLE_RSN                   0x002f
+#define CMD_802_11_SET_AFC                      0x003c
+#define CMD_802_11_GET_AFC                      0x003d
+#define CMD_802_11_DEEP_SLEEP                   0x003e
+#define CMD_802_11_AD_HOC_STOP                  0x0040
+#define CMD_802_11_HOST_SLEEP_CFG               0x0043
+#define CMD_802_11_WAKEUP_CONFIRM               0x0044
+#define CMD_802_11_HOST_SLEEP_ACTIVATE          0x0045
+#define CMD_802_11_BEACON_STOP                  0x0049
+#define CMD_802_11_MAC_ADDRESS                  0x004d
+#define CMD_802_11_LED_GPIO_CTRL                0x004e
+#define CMD_802_11_BAND_CONFIG                  0x0058
+#define CMD_GSPI_BUS_CONFIG                     0x005a
+#define CMD_802_11D_DOMAIN_INFO                 0x005b
+#define CMD_802_11_KEY_MATERIAL                 0x005e
+#define CMD_802_11_SLEEP_PARAMS                 0x0066
+#define CMD_802_11_INACTIVITY_TIMEOUT           0x0067
+#define CMD_802_11_SLEEP_PERIOD                 0x0068
+#define CMD_802_11_TPC_CFG                      0x0072
+#define CMD_802_11_PA_CFG                       0x0073
+#define CMD_802_11_FW_WAKE_METHOD               0x0074
+#define CMD_802_11_SUBSCRIBE_EVENT              0x0075
+#define CMD_802_11_RATE_ADAPT_RATESET           0x0076
+#define CMD_802_11_TX_RATE_QUERY                0x007f
+#define CMD_GET_TSF                             0x0080
+#define CMD_BT_ACCESS                           0x0087
+#define CMD_FWT_ACCESS                          0x0095
+#define CMD_802_11_MONITOR_MODE                 0x0098
+#define CMD_MESH_ACCESS                         0x009b
+#define CMD_MESH_CONFIG_OLD                     0x00a3
+#define CMD_MESH_CONFIG                         0x00ac
+#define CMD_SET_BOOT2_VER                       0x00a5
+#define CMD_FUNC_INIT                           0x00a9
+#define CMD_FUNC_SHUTDOWN                       0x00aa
+#define CMD_802_11_BEACON_CTRL                  0x00b0
+
+/* For the IEEE Power Save */
+#define PS_MODE_ACTION_ENTER_PS                 0x0030
+#define PS_MODE_ACTION_EXIT_PS                  0x0031
+#define PS_MODE_ACTION_SLEEP_CONFIRMED          0x0034
+
+#define CMD_ENABLE_RSN                          0x0001
+#define CMD_DISABLE_RSN                         0x0000
+
+#define CMD_ACT_GET                             0x0000
+#define CMD_ACT_SET                             0x0001
+
+/* Define action or option for CMD_802_11_SET_WEP */
+#define CMD_ACT_ADD                             0x0002
+#define CMD_ACT_REMOVE                          0x0004
+
+#define CMD_TYPE_WEP_40_BIT                     0x01
+#define CMD_TYPE_WEP_104_BIT                    0x02
+
+#define CMD_NUM_OF_WEP_KEYS                     4
+
+#define CMD_WEP_KEY_INDEX_MASK                  0x3fff
+
+/* Define action or option for CMD_802_11_SCAN */
+#define CMD_BSS_TYPE_BSS                        0x0001
+#define CMD_BSS_TYPE_IBSS                       0x0002
+#define CMD_BSS_TYPE_ANY                        0x0003
+
+/* Define action or option for CMD_802_11_SCAN */
+#define CMD_SCAN_TYPE_ACTIVE                    0x0000
+#define CMD_SCAN_TYPE_PASSIVE                   0x0001
+
+#define CMD_SCAN_RADIO_TYPE_BG                  0
+
+#define CMD_SCAN_PROBE_DELAY_TIME               0
+
+/* Define action or option for CMD_MAC_CONTROL */
+#define CMD_ACT_MAC_RX_ON                       0x0001
+#define CMD_ACT_MAC_TX_ON                       0x0002
+#define CMD_ACT_MAC_LOOPBACK_ON                 0x0004
+#define CMD_ACT_MAC_WEP_ENABLE                  0x0008
+#define CMD_ACT_MAC_INT_ENABLE                  0x0010
+#define CMD_ACT_MAC_MULTICAST_ENABLE            0x0020
+#define CMD_ACT_MAC_BROADCAST_ENABLE            0x0040
+#define CMD_ACT_MAC_PROMISCUOUS_ENABLE          0x0080
+#define CMD_ACT_MAC_ALL_MULTICAST_ENABLE        0x0100
+#define CMD_ACT_MAC_STRICT_PROTECTION_ENABLE    0x0400
+
+/* Event flags for CMD_802_11_SUBSCRIBE_EVENT */
+#define CMD_SUBSCRIBE_RSSI_LOW                  0x0001
+#define CMD_SUBSCRIBE_SNR_LOW                   0x0002
+#define CMD_SUBSCRIBE_FAILCOUNT                 0x0004
+#define CMD_SUBSCRIBE_BCNMISS                   0x0008
+#define CMD_SUBSCRIBE_RSSI_HIGH                 0x0010
+#define CMD_SUBSCRIBE_SNR_HIGH                  0x0020
+
+#define RADIO_PREAMBLE_LONG                     0x00
+#define RADIO_PREAMBLE_SHORT                    0x02
+#define RADIO_PREAMBLE_AUTO                     0x04
+
+/* Define action or option for CMD_802_11_RF_CHANNEL */
+#define CMD_OPT_802_11_RF_CHANNEL_GET           0x00
+#define CMD_OPT_802_11_RF_CHANNEL_SET           0x01
+
+/* Define action or option for CMD_802_11_DATA_RATE */
+#define CMD_ACT_SET_TX_AUTO                     0x0000
+#define CMD_ACT_SET_TX_FIX_RATE                 0x0001
+#define CMD_ACT_GET_TX_RATE                     0x0002
+
+/* Options for CMD_802_11_FW_WAKE_METHOD */
+#define CMD_WAKE_METHOD_UNCHANGED               0x0000
+#define CMD_WAKE_METHOD_COMMAND_INT             0x0001
+#define CMD_WAKE_METHOD_GPIO                    0x0002
+
+/* Object IDs for CMD_802_11_SNMP_MIB */
+#define SNMP_MIB_OID_BSS_TYPE                   0x0000
+#define SNMP_MIB_OID_OP_RATE_SET                0x0001
+#define SNMP_MIB_OID_BEACON_PERIOD              0x0002  /* Reserved on v9+ */
+#define SNMP_MIB_OID_DTIM_PERIOD                0x0003  /* Reserved on v9+ */
+#define SNMP_MIB_OID_ASSOC_TIMEOUT              0x0004  /* Reserved on v9+ */
+#define SNMP_MIB_OID_RTS_THRESHOLD              0x0005
+#define SNMP_MIB_OID_SHORT_RETRY_LIMIT          0x0006
+#define SNMP_MIB_OID_LONG_RETRY_LIMIT           0x0007
+#define SNMP_MIB_OID_FRAG_THRESHOLD             0x0008
+#define SNMP_MIB_OID_11D_ENABLE                 0x0009
+#define SNMP_MIB_OID_11H_ENABLE                 0x000A
+
+/* Define action or option for CMD_BT_ACCESS */
+enum cmd_bt_access_opts {
+	/* The bt commands start at 5 instead of 1 because the old dft commands
+	 * are mapped to 1-4.  These old commands are no longer maintained and
+	 * should not be called.
+	 */
+	CMD_ACT_BT_ACCESS_ADD = 5,
+	CMD_ACT_BT_ACCESS_DEL,
+	CMD_ACT_BT_ACCESS_LIST,
+	CMD_ACT_BT_ACCESS_RESET,
+	CMD_ACT_BT_ACCESS_SET_INVERT,
+	CMD_ACT_BT_ACCESS_GET_INVERT
+};
+
+/* Define action or option for CMD_FWT_ACCESS */
+enum cmd_fwt_access_opts {
+	CMD_ACT_FWT_ACCESS_ADD = 1,
+	CMD_ACT_FWT_ACCESS_DEL,
+	CMD_ACT_FWT_ACCESS_LOOKUP,
+	CMD_ACT_FWT_ACCESS_LIST,
+	CMD_ACT_FWT_ACCESS_LIST_ROUTE,
+	CMD_ACT_FWT_ACCESS_LIST_NEIGHBOR,
+	CMD_ACT_FWT_ACCESS_RESET,
+	CMD_ACT_FWT_ACCESS_CLEANUP,
+	CMD_ACT_FWT_ACCESS_TIME,
+};
+
+/* Define action or option for CMD_802_11_HOST_SLEEP_CFG */
+enum cmd_wol_cfg_opts {
+	CMD_ACT_ACTION_NONE = 0,
+	CMD_ACT_SET_WOL_RULE,
+	CMD_ACT_GET_WOL_RULE,
+	CMD_ACT_RESET_WOL_RULE,
+};
+
+/* Define action or option for CMD_MESH_ACCESS */
+enum cmd_mesh_access_opts {
+	CMD_ACT_MESH_GET_TTL = 1,
+	CMD_ACT_MESH_SET_TTL,
+	CMD_ACT_MESH_GET_STATS,
+	CMD_ACT_MESH_GET_ANYCAST,
+	CMD_ACT_MESH_SET_ANYCAST,
+	CMD_ACT_MESH_SET_LINK_COSTS,
+	CMD_ACT_MESH_GET_LINK_COSTS,
+	CMD_ACT_MESH_SET_BCAST_RATE,
+	CMD_ACT_MESH_GET_BCAST_RATE,
+	CMD_ACT_MESH_SET_RREQ_DELAY,
+	CMD_ACT_MESH_GET_RREQ_DELAY,
+	CMD_ACT_MESH_SET_ROUTE_EXP,
+	CMD_ACT_MESH_GET_ROUTE_EXP,
+	CMD_ACT_MESH_SET_AUTOSTART_ENABLED,
+	CMD_ACT_MESH_GET_AUTOSTART_ENABLED,
+	CMD_ACT_MESH_SET_GET_PRB_RSP_LIMIT = 17,
+};
+
+/* Define actions and types for CMD_MESH_CONFIG */
+enum cmd_mesh_config_actions {
+	CMD_ACT_MESH_CONFIG_STOP = 0,
+	CMD_ACT_MESH_CONFIG_START,
+	CMD_ACT_MESH_CONFIG_SET,
+	CMD_ACT_MESH_CONFIG_GET,
+};
+
+enum cmd_mesh_config_types {
+	CMD_TYPE_MESH_SET_BOOTFLAG = 1,
+	CMD_TYPE_MESH_SET_BOOTTIME,
+	CMD_TYPE_MESH_SET_DEF_CHANNEL,
+	CMD_TYPE_MESH_SET_MESH_IE,
+	CMD_TYPE_MESH_GET_DEFAULTS,
+	CMD_TYPE_MESH_GET_MESH_IE, /* GET_DEFAULTS is superset of GET_MESHIE */
+};
+
+/* Card Event definition */
+#define MACREG_INT_CODE_TX_PPA_FREE		0
+#define MACREG_INT_CODE_TX_DMA_DONE		1
+#define MACREG_INT_CODE_LINK_LOST_W_SCAN	2
+#define MACREG_INT_CODE_LINK_LOST_NO_SCAN	3
+#define MACREG_INT_CODE_LINK_SENSED		4
+#define MACREG_INT_CODE_CMD_FINISHED		5
+#define MACREG_INT_CODE_MIB_CHANGED		6
+#define MACREG_INT_CODE_INIT_DONE		7
+#define MACREG_INT_CODE_DEAUTHENTICATED		8
+#define MACREG_INT_CODE_DISASSOCIATED		9
+#define MACREG_INT_CODE_PS_AWAKE		10
+#define MACREG_INT_CODE_PS_SLEEP		11
+#define MACREG_INT_CODE_MIC_ERR_MULTICAST	13
+#define MACREG_INT_CODE_MIC_ERR_UNICAST		14
+#define MACREG_INT_CODE_WM_AWAKE		15
+#define MACREG_INT_CODE_DEEP_SLEEP_AWAKE	16
+#define MACREG_INT_CODE_ADHOC_BCN_LOST		17
+#define MACREG_INT_CODE_HOST_AWAKE		18
+#define MACREG_INT_CODE_STOP_TX			19
+#define MACREG_INT_CODE_START_TX		20
+#define MACREG_INT_CODE_CHANNEL_SWITCH		21
+#define MACREG_INT_CODE_MEASUREMENT_RDY		22
+#define MACREG_INT_CODE_WMM_CHANGE		23
+#define MACREG_INT_CODE_BG_SCAN_REPORT		24
+#define MACREG_INT_CODE_RSSI_LOW		25
+#define MACREG_INT_CODE_SNR_LOW			26
+#define MACREG_INT_CODE_MAX_FAIL		27
+#define MACREG_INT_CODE_RSSI_HIGH		28
+#define MACREG_INT_CODE_SNR_HIGH		29
+#define MACREG_INT_CODE_MESH_AUTO_STARTED	35
+#define MACREG_INT_CODE_FIRMWARE_READY		48
+
+
+/* 802.11-related definitions */
+
+/* TxPD descriptor */
+struct txpd {
+	/* union to cope up with later FW revisions */
+	union {
+		/* Current Tx packet status */
+		__le32 tx_status;
+		struct {
+			/* BSS type: client, AP, etc. */
+			u8 bss_type;
+			/* BSS number */
+			u8 bss_num;
+			/* Reserved */
+			__le16 reserved;
+		} bss;
+	} u;
+	/* Tx control */
+	__le32 tx_control;
+	__le32 tx_packet_location;
+	/* Tx packet length */
+	__le16 tx_packet_length;
+	/* First 2 byte of destination MAC address */
+	u8 tx_dest_addr_high[2];
+	/* Last 4 byte of destination MAC address */
+	u8 tx_dest_addr_low[4];
+	/* Pkt Priority */
+	u8 priority;
+	/* Pkt Trasnit Power control */
+	u8 powermgmt;
+	/* Amount of time the packet has been queued (units = 2ms) */
+	u8 pktdelay_2ms;
+	/* reserved */
+	u8 reserved1;
+} __packed;
+
+/* RxPD Descriptor */
+struct rxpd {
+	/* union to cope up with later FW revisions */
+	union {
+		/* Current Rx packet status */
+		__le16 status;
+		struct {
+			/* BSS type: client, AP, etc. */
+			u8 bss_type;
+			/* BSS number */
+			u8 bss_num;
+		} __packed bss;
+	} __packed u;
+
+	/* SNR */
+	u8 snr;
+
+	/* Tx control */
+	u8 rx_control;
+
+	/* Pkt length */
+	__le16 pkt_len;
+
+	/* Noise Floor */
+	u8 nf;
+
+	/* Rx Packet Rate */
+	u8 rx_rate;
+
+	/* Pkt addr */
+	__le32 pkt_ptr;
+
+	/* Next Rx RxPD addr */
+	__le32 next_rxpd_ptr;
+
+	/* Pkt Priority */
+	u8 priority;
+	u8 reserved[3];
+} __packed;
+
+struct cmd_header {
+	__le16 command;
+	__le16 size;
+	__le16 seqnum;
+	__le16 result;
+} __packed;
+
+/* Generic structure to hold all key types. */
+struct enc_key {
+	u16 len;
+	u16 flags;  /* KEY_INFO_* from defs.h */
+	u16 type; /* KEY_TYPE_* from defs.h */
+	u8 key[32];
+};
+
+/* lbs_offset_value */
+struct lbs_offset_value {
+	u32 offset;
+	u32 value;
+} __packed;
+
+#define MAX_11D_TRIPLETS	83
+
+struct mrvl_ie_domain_param_set {
+	struct mrvl_ie_header header;
+
+	u8 country_code[IEEE80211_COUNTRY_STRING_LEN];
+	struct ieee80211_country_ie_triplet triplet[MAX_11D_TRIPLETS];
+} __packed;
+
+struct cmd_ds_802_11d_domain_info {
+	struct cmd_header hdr;
+
+	__le16 action;
+	struct mrvl_ie_domain_param_set domain;
+} __packed;
+
+/*
+ * Define data structure for CMD_GET_HW_SPEC
+ * This structure defines the response for the GET_HW_SPEC command
+ */
+struct cmd_ds_get_hw_spec {
+	struct cmd_header hdr;
+
+	/* HW Interface version number */
+	__le16 hwifversion;
+	/* HW version number */
+	__le16 version;
+	/* Max number of TxPD FW can handle */
+	__le16 nr_txpd;
+	/* Max no of Multicast address */
+	__le16 nr_mcast_adr;
+	/* MAC address */
+	u8 permanentaddr[6];
+
+	/* region Code */
+	__le16 regioncode;
+
+	/* Number of antenna used */
+	__le16 nr_antenna;
+
+	/* FW release number, example 0x01030304 = 2.3.4p1 */
+	__le32 fwrelease;
+
+	/* Base Address of TxPD queue */
+	__le32 wcb_base;
+	/* Read Pointer of RxPd queue */
+	__le32 rxpd_rdptr;
+
+	/* Write Pointer of RxPd queue */
+	__le32 rxpd_wrptr;
+
+	/*FW/HW capability */
+	__le32 fwcapinfo;
+} __packed;
+
+struct cmd_ds_802_11_subscribe_event {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 events;
+
+	/* A TLV to the CMD_802_11_SUBSCRIBE_EVENT command can contain a
+	 * number of TLVs. From the v5.1 manual, those TLVs would add up to
+	 * 40 bytes. However, future firmware might add additional TLVs, so I
+	 * bump this up a bit.
+	 */
+	uint8_t tlv[128];
+} __packed;
+
+/*
+ * This scan handle Country Information IE(802.11d compliant)
+ * Define data structure for CMD_802_11_SCAN
+ */
+struct cmd_ds_802_11_scan {
+	struct cmd_header hdr;
+
+	uint8_t bsstype;
+	uint8_t bssid[ETH_ALEN];
+	uint8_t tlvbuffer[0];
+} __packed;
+
+struct cmd_ds_802_11_scan_rsp {
+	struct cmd_header hdr;
+
+	__le16 bssdescriptsize;
+	uint8_t nr_sets;
+	uint8_t bssdesc_and_tlvbuffer[0];
+} __packed;
+
+struct cmd_ds_802_11_get_log {
+	struct cmd_header hdr;
+
+	__le32 mcasttxframe;
+	__le32 failed;
+	__le32 retry;
+	__le32 multiretry;
+	__le32 framedup;
+	__le32 rtssuccess;
+	__le32 rtsfailure;
+	__le32 ackfailure;
+	__le32 rxfrag;
+	__le32 mcastrxframe;
+	__le32 fcserror;
+	__le32 txframe;
+	__le32 wepundecryptable;
+} __packed;
+
+struct cmd_ds_mac_control {
+	struct cmd_header hdr;
+	__le16 action;
+	u16 reserved;
+} __packed;
+
+struct cmd_ds_mac_multicast_adr {
+	struct cmd_header hdr;
+	__le16 action;
+	__le16 nr_of_adrs;
+	u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE];
+} __packed;
+
+struct cmd_ds_802_11_authenticate {
+	struct cmd_header hdr;
+
+	u8 bssid[ETH_ALEN];
+	u8 authtype;
+	u8 reserved[10];
+} __packed;
+
+struct cmd_ds_802_11_deauthenticate {
+	struct cmd_header hdr;
+
+	u8 macaddr[ETH_ALEN];
+	__le16 reasoncode;
+} __packed;
+
+struct cmd_ds_802_11_associate {
+	struct cmd_header hdr;
+
+	u8 bssid[6];
+	__le16 capability;
+	__le16 listeninterval;
+	__le16 bcnperiod;
+	u8 dtimperiod;
+	u8 iebuf[512];    /* Enough for required and most optional IEs */
+} __packed;
+
+struct cmd_ds_802_11_associate_response {
+	struct cmd_header hdr;
+
+	__le16 capability;
+	__le16 statuscode;
+	__le16 aid;
+	u8 iebuf[512];
+} __packed;
+
+struct cmd_ds_802_11_set_wep {
+	struct cmd_header hdr;
+
+	/* ACT_ADD, ACT_REMOVE or ACT_ENABLE */
+	__le16 action;
+
+	/* key Index selected for Tx */
+	__le16 keyindex;
+
+	/* 40, 128bit or TXWEP */
+	uint8_t keytype[4];
+	uint8_t keymaterial[4][16];
+} __packed;
+
+struct cmd_ds_802_11_snmp_mib {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 oid;
+	__le16 bufsize;
+	u8 value[128];
+} __packed;
+
+struct cmd_ds_reg_access {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 offset;
+	union {
+		u8 bbp_rf;  /* for BBP and RF registers */
+		__le32 mac; /* for MAC registers */
+	} value;
+} __packed;
+
+struct cmd_ds_802_11_radio_control {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 control;
+} __packed;
+
+struct cmd_ds_802_11_beacon_control {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 beacon_enable;
+	__le16 beacon_period;
+} __packed;
+
+struct cmd_ds_802_11_sleep_params {
+	struct cmd_header hdr;
+
+	/* ACT_GET/ACT_SET */
+	__le16 action;
+
+	/* Sleep clock error in ppm */
+	__le16 error;
+
+	/* Wakeup offset in usec */
+	__le16 offset;
+
+	/* Clock stabilization time in usec */
+	__le16 stabletime;
+
+	/* control periodic calibration */
+	uint8_t calcontrol;
+
+	/* control the use of external sleep clock */
+	uint8_t externalsleepclk;
+
+	/* reserved field, should be set to zero */
+	__le16 reserved;
+} __packed;
+
+struct cmd_ds_802_11_rf_channel {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 channel;
+	__le16 rftype;      /* unused */
+	__le16 reserved;    /* unused */
+	u8 channellist[32]; /* unused */
+} __packed;
+
+struct cmd_ds_802_11_rssi {
+	struct cmd_header hdr;
+
+	/*
+	 * request:  number of beacons (N) to average the SNR and NF over
+	 * response: SNR of most recent beacon
+	 */
+	__le16 n_or_snr;
+
+	/*
+	 * The following fields are only set in the response.
+	 * In the request these are reserved and should be set to 0.
+	 */
+	__le16 nf;       /* most recent beacon noise floor */
+	__le16 avg_snr;  /* average SNR weighted by N from request */
+	__le16 avg_nf;   /* average noise floor weighted by N from request */
+} __packed;
+
+struct cmd_ds_802_11_mac_address {
+	struct cmd_header hdr;
+
+	__le16 action;
+	u8 macadd[ETH_ALEN];
+} __packed;
+
+struct cmd_ds_802_11_rf_tx_power {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 curlevel;
+	s8 maxlevel;
+	s8 minlevel;
+} __packed;
+
+/* MONITOR_MODE only exists in OLPC v5 firmware */
+struct cmd_ds_802_11_monitor_mode {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 mode;
+} __packed;
+
+struct cmd_ds_set_boot2_ver {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 version;
+} __packed;
+
+struct cmd_ds_802_11_fw_wake_method {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 method;
+} __packed;
+
+struct cmd_ds_802_11_ps_mode {
+	struct cmd_header hdr;
+
+	__le16 action;
+
+	/*
+	 * Interval for keepalive in PS mode:
+	 * 0x0000 = don't change
+	 * 0x001E = firmware default
+	 * 0xFFFF = disable
+	 */
+	__le16 nullpktinterval;
+
+	/*
+	 * Number of DTIM intervals to wake up for:
+	 * 0 = don't change
+	 * 1 = firmware default
+	 * 5 = max
+	 */
+	__le16 multipledtim;
+
+	__le16 reserved;
+	__le16 locallisteninterval;
+
+	/*
+	 * AdHoc awake period (FW v9+ only):
+	 * 0 = don't change
+	 * 1 = always awake (IEEE standard behavior)
+	 * 2 - 31 = sleep for (n - 1) periods and awake for 1 period
+	 * 32 - 254 = invalid
+	 * 255 = sleep at each ATIM
+	 */
+	__le16 adhoc_awake_period;
+} __packed;
+
+struct cmd_confirm_sleep {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 nullpktinterval;
+	__le16 multipledtim;
+	__le16 reserved;
+	__le16 locallisteninterval;
+} __packed;
+
+struct cmd_ds_802_11_data_rate {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 reserved;
+	u8 rates[MAX_RATES];
+} __packed;
+
+struct cmd_ds_802_11_rate_adapt_rateset {
+	struct cmd_header hdr;
+	__le16 action;
+	__le16 enablehwauto;
+	__le16 bitmap;
+} __packed;
+
+struct cmd_ds_802_11_ad_hoc_start {
+	struct cmd_header hdr;
+
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 bsstype;
+	__le16 beaconperiod;
+	u8 dtimperiod;   /* Reserved on v9 and later */
+	struct ieee_ie_ibss_param_set ibss;
+	u8 reserved1[4];
+	struct ieee_ie_ds_param_set ds;
+	u8 reserved2[4];
+	__le16 probedelay;  /* Reserved on v9 and later */
+	__le16 capability;
+	u8 rates[MAX_RATES];
+	u8 tlv_memory_size_pad[100];
+} __packed;
+
+struct cmd_ds_802_11_ad_hoc_result {
+	struct cmd_header hdr;
+
+	u8 pad[3];
+	u8 bssid[ETH_ALEN];
+} __packed;
+
+struct adhoc_bssdesc {
+	u8 bssid[ETH_ALEN];
+	u8 ssid[IEEE80211_MAX_SSID_LEN];
+	u8 type;
+	__le16 beaconperiod;
+	u8 dtimperiod;
+	__le64 timestamp;
+	__le64 localtime;
+	struct ieee_ie_ds_param_set ds;
+	u8 reserved1[4];
+	struct ieee_ie_ibss_param_set ibss;
+	u8 reserved2[4];
+	__le16 capability;
+	u8 rates[MAX_RATES];
+
+	/*
+	 * DO NOT ADD ANY FIELDS TO THIS STRUCTURE. It is used below in the
+	 * Adhoc join command and will cause a binary layout mismatch with
+	 * the firmware
+	 */
+} __packed;
+
+struct cmd_ds_802_11_ad_hoc_join {
+	struct cmd_header hdr;
+
+	struct adhoc_bssdesc bss;
+	__le16 failtimeout;   /* Reserved on v9 and later */
+	__le16 probedelay;    /* Reserved on v9 and later */
+} __packed;
+
+struct cmd_ds_802_11_ad_hoc_stop {
+	struct cmd_header hdr;
+} __packed;
+
+struct cmd_ds_802_11_enable_rsn {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 enable;
+} __packed;
+
+struct MrvlIEtype_keyParamSet {
+	/* type ID */
+	__le16 type;
+
+	/* length of Payload */
+	__le16 length;
+
+	/* type of key: WEP=0, TKIP=1, AES=2 */
+	__le16 keytypeid;
+
+	/* key control Info specific to a keytypeid */
+	__le16 keyinfo;
+
+	/* length of key */
+	__le16 keylen;
+
+	/* key material of size keylen */
+	u8 key[32];
+} __packed;
+
+#define MAX_WOL_RULES 		16
+
+struct host_wol_rule {
+	uint8_t rule_no;
+	uint8_t rule_ops;
+	__le16 sig_offset;
+	__le16 sig_length;
+	__le16 reserve;
+	__be32 sig_mask;
+	__be32 signature;
+} __packed;
+
+struct wol_config {
+	uint8_t action;
+	uint8_t pattern;
+	uint8_t no_rules_in_cmd;
+	uint8_t result;
+	struct host_wol_rule rule[MAX_WOL_RULES];
+} __packed;
+
+struct cmd_ds_host_sleep {
+	struct cmd_header hdr;
+	__le32 criteria;
+	uint8_t gpio;
+	uint16_t gap;
+	struct wol_config wol_conf;
+} __packed;
+
+
+
+struct cmd_ds_802_11_key_material {
+	struct cmd_header hdr;
+
+	__le16 action;
+	struct MrvlIEtype_keyParamSet keyParamSet[2];
+} __packed;
+
+struct cmd_ds_802_11_eeprom_access {
+	struct cmd_header hdr;
+	__le16 action;
+	__le16 offset;
+	__le16 len;
+	/* firmware says it returns a maximum of 20 bytes */
+#define LBS_EEPROM_READ_LEN 20
+	u8 value[LBS_EEPROM_READ_LEN];
+} __packed;
+
+struct cmd_ds_802_11_tpc_cfg {
+	struct cmd_header hdr;
+
+	__le16 action;
+	uint8_t enable;
+	int8_t P0;
+	int8_t P1;
+	int8_t P2;
+	uint8_t usesnr;
+} __packed;
+
+
+struct cmd_ds_802_11_pa_cfg {
+	struct cmd_header hdr;
+
+	__le16 action;
+	uint8_t enable;
+	int8_t P0;
+	int8_t P1;
+	int8_t P2;
+} __packed;
+
+
+struct cmd_ds_802_11_led_ctrl {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 numled;
+	u8 data[256];
+} __packed;
+
+/* Automatic Frequency Control */
+struct cmd_ds_802_11_afc {
+	struct cmd_header hdr;
+
+	__le16 afc_auto;
+	union {
+		struct {
+			__le16 threshold;
+			__le16 period;
+		};
+		struct {
+			__le16 timing_offset; /* signed */
+			__le16 carrier_offset; /* signed */
+		};
+	};
+} __packed;
+
+struct cmd_tx_rate_query {
+	__le16 txrate;
+} __packed;
+
+struct cmd_ds_get_tsf {
+	__le64 tsfvalue;
+} __packed;
+
+struct cmd_ds_bt_access {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le32 id;
+	u8 addr1[ETH_ALEN];
+	u8 addr2[ETH_ALEN];
+} __packed;
+
+struct cmd_ds_fwt_access {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le32 id;
+	u8 valid;
+	u8 da[ETH_ALEN];
+	u8 dir;
+	u8 ra[ETH_ALEN];
+	__le32 ssn;
+	__le32 dsn;
+	__le32 metric;
+	u8 rate;
+	u8 hopcount;
+	u8 ttl;
+	__le32 expiration;
+	u8 sleepmode;
+	__le32 snr;
+	__le32 references;
+	u8 prec[ETH_ALEN];
+} __packed;
+
+struct cmd_ds_mesh_config {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le16 channel;
+	__le16 type;
+	__le16 length;
+	u8 data[128];	/* last position reserved */
+} __packed;
+
+struct cmd_ds_mesh_access {
+	struct cmd_header hdr;
+
+	__le16 action;
+	__le32 data[32];	/* last position reserved */
+} __packed;
+
+/* Number of stats counters returned by the firmware */
+#define MESH_STATS_NUM 8
+#endif