File-copy from v4.4.100
This is the result of 'cp' from a linux-stable tree with the 'v4.4.100'
tag checked out (commit 26d6298789e695c9f627ce49a7bbd2286405798a) on
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Please refer to that tree for all history prior to this point.
Change-Id: I8a9ee2aea93cd29c52c847d0ce33091a73ae6afe
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
new file mode 100644
index 0000000..ddfd787
--- /dev/null
+++ b/drivers/usb/serial/spcp8x5.c
@@ -0,0 +1,511 @@
+/*
+ * spcp8x5 USB to serial adaptor driver
+ *
+ * Copyright (C) 2010-2013 Johan Hovold (jhovold@gmail.com)
+ * Copyright (C) 2006 Linxb (xubin.lin@worldplus.com.cn)
+ * Copyright (C) 2006 S1 Corp.
+ *
+ * Original driver for 2.6.10 pl2303 driver by
+ * Greg Kroah-Hartman (greg@kroah.com)
+ * Changes for 2.6.20 by Harald Klein <hari@vt100.at>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/usb.h>
+#include <linux/usb/serial.h>
+
+#define DRIVER_DESC "SPCP8x5 USB to serial adaptor driver"
+
+#define SPCP825_QUIRK_NO_UART_STATUS 0x01
+#define SPCP825_QUIRK_NO_WORK_MODE 0x02
+
+#define SPCP8x5_007_VID 0x04FC
+#define SPCP8x5_007_PID 0x0201
+#define SPCP8x5_008_VID 0x04fc
+#define SPCP8x5_008_PID 0x0235
+#define SPCP8x5_PHILIPS_VID 0x0471
+#define SPCP8x5_PHILIPS_PID 0x081e
+#define SPCP8x5_INTERMATIC_VID 0x04FC
+#define SPCP8x5_INTERMATIC_PID 0x0204
+#define SPCP8x5_835_VID 0x04fc
+#define SPCP8x5_835_PID 0x0231
+
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(SPCP8x5_PHILIPS_VID , SPCP8x5_PHILIPS_PID)},
+ { USB_DEVICE(SPCP8x5_INTERMATIC_VID, SPCP8x5_INTERMATIC_PID)},
+ { USB_DEVICE(SPCP8x5_835_VID, SPCP8x5_835_PID)},
+ { USB_DEVICE(SPCP8x5_008_VID, SPCP8x5_008_PID)},
+ { USB_DEVICE(SPCP8x5_007_VID, SPCP8x5_007_PID),
+ .driver_info = SPCP825_QUIRK_NO_UART_STATUS |
+ SPCP825_QUIRK_NO_WORK_MODE },
+ { } /* Terminating entry */
+};
+MODULE_DEVICE_TABLE(usb, id_table);
+
+struct spcp8x5_usb_ctrl_arg {
+ u8 type;
+ u8 cmd;
+ u8 cmd_type;
+ u16 value;
+ u16 index;
+ u16 length;
+};
+
+
+/* spcp8x5 spec register define */
+#define MCR_CONTROL_LINE_RTS 0x02
+#define MCR_CONTROL_LINE_DTR 0x01
+#define MCR_DTR 0x01
+#define MCR_RTS 0x02
+
+#define MSR_STATUS_LINE_DCD 0x80
+#define MSR_STATUS_LINE_RI 0x40
+#define MSR_STATUS_LINE_DSR 0x20
+#define MSR_STATUS_LINE_CTS 0x10
+
+/* verdor command here , we should define myself */
+#define SET_DEFAULT 0x40
+#define SET_DEFAULT_TYPE 0x20
+
+#define SET_UART_FORMAT 0x40
+#define SET_UART_FORMAT_TYPE 0x21
+#define SET_UART_FORMAT_SIZE_5 0x00
+#define SET_UART_FORMAT_SIZE_6 0x01
+#define SET_UART_FORMAT_SIZE_7 0x02
+#define SET_UART_FORMAT_SIZE_8 0x03
+#define SET_UART_FORMAT_STOP_1 0x00
+#define SET_UART_FORMAT_STOP_2 0x04
+#define SET_UART_FORMAT_PAR_NONE 0x00
+#define SET_UART_FORMAT_PAR_ODD 0x10
+#define SET_UART_FORMAT_PAR_EVEN 0x30
+#define SET_UART_FORMAT_PAR_MASK 0xD0
+#define SET_UART_FORMAT_PAR_SPACE 0x90
+
+#define GET_UART_STATUS_TYPE 0xc0
+#define GET_UART_STATUS 0x22
+#define GET_UART_STATUS_MSR 0x06
+
+#define SET_UART_STATUS 0x40
+#define SET_UART_STATUS_TYPE 0x23
+#define SET_UART_STATUS_MCR 0x0004
+#define SET_UART_STATUS_MCR_DTR 0x01
+#define SET_UART_STATUS_MCR_RTS 0x02
+#define SET_UART_STATUS_MCR_LOOP 0x10
+
+#define SET_WORKING_MODE 0x40
+#define SET_WORKING_MODE_TYPE 0x24
+#define SET_WORKING_MODE_U2C 0x00
+#define SET_WORKING_MODE_RS485 0x01
+#define SET_WORKING_MODE_PDMA 0x02
+#define SET_WORKING_MODE_SPP 0x03
+
+#define SET_FLOWCTL_CHAR 0x40
+#define SET_FLOWCTL_CHAR_TYPE 0x25
+
+#define GET_VERSION 0xc0
+#define GET_VERSION_TYPE 0x26
+
+#define SET_REGISTER 0x40
+#define SET_REGISTER_TYPE 0x27
+
+#define GET_REGISTER 0xc0
+#define GET_REGISTER_TYPE 0x28
+
+#define SET_RAM 0x40
+#define SET_RAM_TYPE 0x31
+
+#define GET_RAM 0xc0
+#define GET_RAM_TYPE 0x32
+
+/* how come ??? */
+#define UART_STATE 0x08
+#define UART_STATE_TRANSIENT_MASK 0x75
+#define UART_DCD 0x01
+#define UART_DSR 0x02
+#define UART_BREAK_ERROR 0x04
+#define UART_RING 0x08
+#define UART_FRAME_ERROR 0x10
+#define UART_PARITY_ERROR 0x20
+#define UART_OVERRUN_ERROR 0x40
+#define UART_CTS 0x80
+
+struct spcp8x5_private {
+ unsigned quirks;
+ spinlock_t lock;
+ u8 line_control;
+};
+
+static int spcp8x5_probe(struct usb_serial *serial,
+ const struct usb_device_id *id)
+{
+ usb_set_serial_data(serial, (void *)id);
+
+ return 0;
+}
+
+static int spcp8x5_attach(struct usb_serial *serial)
+{
+ unsigned char num_ports = serial->num_ports;
+
+ if (serial->num_bulk_in < num_ports ||
+ serial->num_bulk_out < num_ports) {
+ dev_err(&serial->interface->dev, "missing endpoints\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int spcp8x5_port_probe(struct usb_serial_port *port)
+{
+ const struct usb_device_id *id = usb_get_serial_data(port->serial);
+ struct spcp8x5_private *priv;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ spin_lock_init(&priv->lock);
+ priv->quirks = id->driver_info;
+
+ usb_set_serial_port_data(port, priv);
+
+ port->port.drain_delay = 256;
+
+ return 0;
+}
+
+static int spcp8x5_port_remove(struct usb_serial_port *port)
+{
+ struct spcp8x5_private *priv;
+
+ priv = usb_get_serial_port_data(port);
+ kfree(priv);
+
+ return 0;
+}
+
+static int spcp8x5_set_ctrl_line(struct usb_serial_port *port, u8 mcr)
+{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *dev = port->serial->dev;
+ int retval;
+
+ if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
+ return -EPERM;
+
+ retval = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ SET_UART_STATUS_TYPE, SET_UART_STATUS,
+ mcr, 0x04, NULL, 0, 100);
+ if (retval != 0) {
+ dev_err(&port->dev, "failed to set control lines: %d\n",
+ retval);
+ }
+ return retval;
+}
+
+static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status)
+{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *dev = port->serial->dev;
+ u8 *buf;
+ int ret;
+
+ if (priv->quirks & SPCP825_QUIRK_NO_UART_STATUS)
+ return -EPERM;
+
+ buf = kzalloc(1, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ GET_UART_STATUS, GET_UART_STATUS_TYPE,
+ 0, GET_UART_STATUS_MSR, buf, 1, 100);
+ if (ret < 1) {
+ dev_err(&port->dev, "failed to get modem status: %d\n", ret);
+ if (ret >= 0)
+ ret = -EIO;
+ goto out;
+ }
+
+ dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf);
+ *status = *buf;
+ ret = 0;
+out:
+ kfree(buf);
+
+ return ret;
+}
+
+static void spcp8x5_set_work_mode(struct usb_serial_port *port, u16 value,
+ u16 index)
+{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ struct usb_device *dev = port->serial->dev;
+ int ret;
+
+ if (priv->quirks & SPCP825_QUIRK_NO_WORK_MODE)
+ return;
+
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+ SET_WORKING_MODE_TYPE, SET_WORKING_MODE,
+ value, index, NULL, 0, 100);
+ dev_dbg(&port->dev, "value = %#x , index = %#x\n", value, index);
+ if (ret < 0)
+ dev_err(&port->dev, "failed to set work mode: %d\n", ret);
+}
+
+static int spcp8x5_carrier_raised(struct usb_serial_port *port)
+{
+ u8 msr;
+ int ret;
+
+ ret = spcp8x5_get_msr(port, &msr);
+ if (ret || msr & MSR_STATUS_LINE_DCD)
+ return 1;
+
+ return 0;
+}
+
+static void spcp8x5_dtr_rts(struct usb_serial_port *port, int on)
+{
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 control;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (on)
+ priv->line_control = MCR_CONTROL_LINE_DTR
+ | MCR_CONTROL_LINE_RTS;
+ else
+ priv->line_control &= ~ (MCR_CONTROL_LINE_DTR
+ | MCR_CONTROL_LINE_RTS);
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ spcp8x5_set_ctrl_line(port, control);
+}
+
+static void spcp8x5_init_termios(struct tty_struct *tty)
+{
+ tty->termios = tty_std_termios;
+ tty->termios.c_cflag = B115200 | CS8 | CREAD | HUPCL | CLOCAL;
+ tty->termios.c_ispeed = 115200;
+ tty->termios.c_ospeed = 115200;
+}
+
+static void spcp8x5_set_termios(struct tty_struct *tty,
+ struct usb_serial_port *port, struct ktermios *old_termios)
+{
+ struct usb_serial *serial = port->serial;
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ unsigned int cflag = tty->termios.c_cflag;
+ unsigned short uartdata;
+ unsigned char buf[2] = {0, 0};
+ int baud;
+ int i;
+ u8 control;
+
+ /* check that they really want us to change something */
+ if (old_termios && !tty_termios_hw_change(&tty->termios, old_termios))
+ return;
+
+ /* set DTR/RTS active */
+ spin_lock_irqsave(&priv->lock, flags);
+ control = priv->line_control;
+ if (old_termios && (old_termios->c_cflag & CBAUD) == B0) {
+ priv->line_control |= MCR_DTR;
+ if (!(old_termios->c_cflag & CRTSCTS))
+ priv->line_control |= MCR_RTS;
+ }
+ if (control != priv->line_control) {
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+ spcp8x5_set_ctrl_line(port, control);
+ } else {
+ spin_unlock_irqrestore(&priv->lock, flags);
+ }
+
+ /* Set Baud Rate */
+ baud = tty_get_baud_rate(tty);
+ switch (baud) {
+ case 300: buf[0] = 0x00; break;
+ case 600: buf[0] = 0x01; break;
+ case 1200: buf[0] = 0x02; break;
+ case 2400: buf[0] = 0x03; break;
+ case 4800: buf[0] = 0x04; break;
+ case 9600: buf[0] = 0x05; break;
+ case 19200: buf[0] = 0x07; break;
+ case 38400: buf[0] = 0x09; break;
+ case 57600: buf[0] = 0x0a; break;
+ case 115200: buf[0] = 0x0b; break;
+ case 230400: buf[0] = 0x0c; break;
+ case 460800: buf[0] = 0x0d; break;
+ case 921600: buf[0] = 0x0e; break;
+/* case 1200000: buf[0] = 0x0f; break; */
+/* case 2400000: buf[0] = 0x10; break; */
+ case 3000000: buf[0] = 0x11; break;
+/* case 6000000: buf[0] = 0x12; break; */
+ case 0:
+ case 1000000:
+ buf[0] = 0x0b; break;
+ default:
+ dev_err(&port->dev, "unsupported baudrate, using 9600\n");
+ }
+
+ /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
+ switch (cflag & CSIZE) {
+ case CS5:
+ buf[1] |= SET_UART_FORMAT_SIZE_5;
+ break;
+ case CS6:
+ buf[1] |= SET_UART_FORMAT_SIZE_6;
+ break;
+ case CS7:
+ buf[1] |= SET_UART_FORMAT_SIZE_7;
+ break;
+ default:
+ case CS8:
+ buf[1] |= SET_UART_FORMAT_SIZE_8;
+ break;
+ }
+
+ /* Set Stop bit2 : 0:1bit 1:2bit */
+ buf[1] |= (cflag & CSTOPB) ? SET_UART_FORMAT_STOP_2 :
+ SET_UART_FORMAT_STOP_1;
+
+ /* Set Parity bit3-4 01:Odd 11:Even */
+ if (cflag & PARENB) {
+ buf[1] |= (cflag & PARODD) ?
+ SET_UART_FORMAT_PAR_ODD : SET_UART_FORMAT_PAR_EVEN ;
+ } else {
+ buf[1] |= SET_UART_FORMAT_PAR_NONE;
+ }
+ uartdata = buf[0] | buf[1]<<8;
+
+ i = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
+ uartdata, 0, NULL, 0, 100);
+ if (i < 0)
+ dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
+ uartdata, i);
+ dev_dbg(&port->dev, "0x21:0x40:0:0 %d\n", i);
+
+ if (cflag & CRTSCTS) {
+ /* enable hardware flow control */
+ spcp8x5_set_work_mode(port, 0x000a, SET_WORKING_MODE_U2C);
+ }
+}
+
+static int spcp8x5_open(struct tty_struct *tty, struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ int ret;
+
+ usb_clear_halt(serial->dev, port->write_urb->pipe);
+ usb_clear_halt(serial->dev, port->read_urb->pipe);
+
+ ret = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
+ 0x09, 0x00,
+ 0x01, 0x00, NULL, 0x00, 100);
+ if (ret)
+ return ret;
+
+ spcp8x5_set_ctrl_line(port, priv->line_control);
+
+ if (tty)
+ spcp8x5_set_termios(tty, port, NULL);
+
+ return usb_serial_generic_open(tty, port);
+}
+
+static int spcp8x5_tiocmset(struct tty_struct *tty,
+ unsigned int set, unsigned int clear)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ u8 control;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ if (set & TIOCM_RTS)
+ priv->line_control |= MCR_RTS;
+ if (set & TIOCM_DTR)
+ priv->line_control |= MCR_DTR;
+ if (clear & TIOCM_RTS)
+ priv->line_control &= ~MCR_RTS;
+ if (clear & TIOCM_DTR)
+ priv->line_control &= ~MCR_DTR;
+ control = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ return spcp8x5_set_ctrl_line(port, control);
+}
+
+static int spcp8x5_tiocmget(struct tty_struct *tty)
+{
+ struct usb_serial_port *port = tty->driver_data;
+ struct spcp8x5_private *priv = usb_get_serial_port_data(port);
+ unsigned long flags;
+ unsigned int mcr;
+ u8 status;
+ unsigned int result;
+
+ result = spcp8x5_get_msr(port, &status);
+ if (result)
+ return result;
+
+ spin_lock_irqsave(&priv->lock, flags);
+ mcr = priv->line_control;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
+ | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
+ | ((status & MSR_STATUS_LINE_CTS) ? TIOCM_CTS : 0)
+ | ((status & MSR_STATUS_LINE_DSR) ? TIOCM_DSR : 0)
+ | ((status & MSR_STATUS_LINE_RI) ? TIOCM_RI : 0)
+ | ((status & MSR_STATUS_LINE_DCD) ? TIOCM_CD : 0);
+
+ return result;
+}
+
+static struct usb_serial_driver spcp8x5_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "SPCP8x5",
+ },
+ .id_table = id_table,
+ .num_ports = 1,
+ .open = spcp8x5_open,
+ .dtr_rts = spcp8x5_dtr_rts,
+ .carrier_raised = spcp8x5_carrier_raised,
+ .set_termios = spcp8x5_set_termios,
+ .init_termios = spcp8x5_init_termios,
+ .tiocmget = spcp8x5_tiocmget,
+ .tiocmset = spcp8x5_tiocmset,
+ .probe = spcp8x5_probe,
+ .attach = spcp8x5_attach,
+ .port_probe = spcp8x5_port_probe,
+ .port_remove = spcp8x5_port_remove,
+};
+
+static struct usb_serial_driver * const serial_drivers[] = {
+ &spcp8x5_device, NULL
+};
+
+module_usb_serial_driver(serial_drivers, id_table);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE("GPL");