File-copy from v4.4.100
This is the result of 'cp' from a linux-stable tree with the 'v4.4.100'
tag checked out (commit 26d6298789e695c9f627ce49a7bbd2286405798a) on
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git
Please refer to that tree for all history prior to this point.
Change-Id: I8a9ee2aea93cd29c52c847d0ce33091a73ae6afe
diff --git a/tools/build/.gitignore b/tools/build/.gitignore
new file mode 100644
index 0000000..a776371
--- /dev/null
+++ b/tools/build/.gitignore
@@ -0,0 +1 @@
+fixdep
diff --git a/tools/build/Build b/tools/build/Build
new file mode 100644
index 0000000..63a6c34
--- /dev/null
+++ b/tools/build/Build
@@ -0,0 +1 @@
+fixdep-y := fixdep.o
diff --git a/tools/build/Build.include b/tools/build/Build.include
new file mode 100644
index 0000000..4d000bc
--- /dev/null
+++ b/tools/build/Build.include
@@ -0,0 +1,92 @@
+###
+# build: Generic definitions
+#
+# Lots of this code have been borrowed or heavily inspired from parts
+# of kbuild code, which is not credited, but mostly developed by:
+#
+# Copyright (C) Sam Ravnborg <sam@mars.ravnborg.org>, 2015
+# Copyright (C) Linus Torvalds <torvalds@linux-foundation.org>, 2015
+#
+
+###
+# Convenient variables
+comma := ,
+squote := '
+
+###
+# Name of target with a '.' as filename prefix. foo/bar.o => foo/.bar.o
+dot-target = $(dir $@).$(notdir $@)
+
+###
+# filename of target with directory and extension stripped
+basetarget = $(basename $(notdir $@))
+
+###
+# The temporary file to save gcc -MD generated dependencies must not
+# contain a comma
+depfile = $(subst $(comma),_,$(dot-target).d)
+
+###
+# Check if both arguments has same arguments. Result is empty string if equal.
+arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
+ $(filter-out $(cmd_$@), $(cmd_$(1))) )
+
+###
+# Escape single quote for use in echo statements
+escsq = $(subst $(squote),'\$(squote)',$1)
+
+# Echo command
+# Short version is used, if $(quiet) equals `quiet_', otherwise full one.
+echo-cmd = $(if $($(quiet)cmd_$(1)),\
+ echo ' $(call escsq,$($(quiet)cmd_$(1)))';)
+
+###
+# Replace >$< with >$$< to preserve $ when reloading the .cmd file
+# (needed for make)
+# Replace >#< with >\#< to avoid starting a comment in the .cmd file
+# (needed for make)
+# Replace >'< with >'\''< to be able to enclose the whole string in '...'
+# (needed for the shell)
+make-cmd = $(call escsq,$(subst \#,\\\#,$(subst $$,$$$$,$(cmd_$(1)))))
+
+###
+# Find any prerequisites that is newer than target or that does not exist.
+# PHONY targets skipped in both cases.
+any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
+
+###
+# Copy dependency data into .cmd file
+# - gcc -M dependency info
+# - command line to create object 'cmd_object :='
+dep-cmd = $(if $(wildcard $(fixdep)), \
+ $(fixdep) $(depfile) $@ '$(make-cmd)' > $(dot-target).tmp; \
+ rm -f $(depfile); \
+ mv -f $(dot-target).tmp $(dot-target).cmd, \
+ printf '\# cannot find fixdep (%s)\n' $(fixdep) > $(dot-target).cmd; \
+ printf '\# using basic dep data\n\n' >> $(dot-target).cmd; \
+ cat $(depfile) >> $(dot-target).cmd; \
+ printf '%s\n' 'cmd_$@ := $(make-cmd)' >> $(dot-target).cmd)
+
+###
+# if_changed_dep - execute command if any prerequisite is newer than
+# target, or command line has changed and update
+# dependencies in the cmd file
+if_changed_dep = $(if $(strip $(any-prereq) $(arg-check)), \
+ @set -e; \
+ $(echo-cmd) $(cmd_$(1)) && $(dep-cmd))
+
+# if_changed - execute command if any prerequisite is newer than
+# target, or command line has changed
+if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
+ @set -e; \
+ $(echo-cmd) $(cmd_$(1)); \
+ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
+
+###
+# C flags to be used in rule definitions, includes:
+# - depfile generation
+# - global $(CFLAGS)
+# - per target C flags
+# - per object C flags
+# - BUILD_STR macro to allow '-D"$(variable)"' constructs
+c_flags = -Wp,-MD,$(depfile),-MT,$@ $(CFLAGS) -D"BUILD_STR(s)=\#s" $(CFLAGS_$(basetarget).o) $(CFLAGS_$(obj))
diff --git a/tools/build/Documentation/Build.txt b/tools/build/Documentation/Build.txt
new file mode 100644
index 0000000..a47bffb
--- /dev/null
+++ b/tools/build/Documentation/Build.txt
@@ -0,0 +1,166 @@
+Build Framework
+===============
+
+The perf build framework was adopted from the kernel build system, hence the
+idea and the way how objects are built is the same.
+
+Basically the user provides set of 'Build' files that list objects and
+directories to nest for specific target to be build.
+
+Unlike the kernel we don't have a single build object 'obj-y' list that where
+we setup source objects, but we support more. This allows one 'Build' file to
+carry a sources list for multiple build objects.
+
+
+Build framework makefiles
+-------------------------
+
+The build framework consists of 2 Makefiles:
+
+ Build.include
+ Makefile.build
+
+While the 'Build.include' file contains just some generic definitions, the
+'Makefile.build' file is the makefile used from the outside. It's
+interface/usage is following:
+
+ $ make -f tools/build/Makefile.build srctree=$(KSRC) dir=$(DIR) obj=$(OBJECT)
+
+where:
+
+ KSRC - is the path to kernel sources
+ DIR - is the path to the project to be built
+ OBJECT - is the name of the build object
+
+When succefully finished the $(DIR) directory contains the final object file
+called $(OBJECT)-in.o:
+
+ $ ls $(DIR)/$(OBJECT)-in.o
+
+which includes all compiled sources described in 'Build' makefiles.
+
+
+Build makefiles
+---------------
+
+The user supplies 'Build' makefiles that contains a objects list, and connects
+the build to nested directories.
+
+Assume we have the following project structure:
+
+ ex/a.c
+ /b.c
+ /c.c
+ /d.c
+ /arch/e.c
+ /arch/f.c
+
+Out of which you build the 'ex' binary ' and the 'libex.a' library:
+
+ 'ex' - consists of 'a.o', 'b.o' and libex.a
+ 'libex.a' - consists of 'c.o', 'd.o', 'e.o' and 'f.o'
+
+The build framework does not create the 'ex' and 'libex.a' binaries for you, it
+only prepares proper objects to be compiled and grouped together.
+
+To follow the above example, the user provides following 'Build' files:
+
+ ex/Build:
+ ex-y += a.o
+ ex-y += b.o
+ ex-y += b.o # duplicates in the lists are allowed
+
+ libex-y += c.o
+ libex-y += d.o
+ libex-y += arch/
+
+ ex/arch/Build:
+ libex-y += e.o
+ libex-y += f.o
+
+and runs:
+
+ $ make -f tools/build/Makefile.build dir=. obj=ex
+ $ make -f tools/build/Makefile.build dir=. obj=libex
+
+which creates the following objects:
+
+ ex/ex-in.o
+ ex/libex-in.o
+
+that contain request objects names in Build files.
+
+It's only a matter of 2 single commands to create the final binaries:
+
+ $ ar rcs libex.a libex-in.o
+ $ gcc -o ex ex-in.o libex.a
+
+You can check the 'ex' example in 'tools/build/tests/ex' for more details.
+
+
+Makefile.include
+----------------
+
+The tools/build/Makefile.include makefile could be included
+via user makefiles to get usefull definitions.
+
+It defines following interface:
+
+ - build macro definition:
+ build := -f $(srctree)/tools/build/Makefile.build dir=. obj
+
+ to make it easier to invoke build like:
+ make $(build)=ex
+
+
+Fixdep
+------
+It is necessary to build the fixdep helper before invoking the build.
+The Makefile.include file adds the fixdep target, that could be
+invoked by the user.
+
+
+Rules
+-----
+
+The build framework provides standard compilation rules to handle .S and .c
+compilation.
+
+It's possible to include special rule if needed (like we do for flex or bison
+code generation).
+
+
+CFLAGS
+------
+
+It's possible to alter the standard object C flags in the following way:
+
+ CFLAGS_perf.o += '...' - alters CFLAGS for perf.o object
+ CFLAGS_gtk += '...' - alters CFLAGS for gtk build object
+
+This C flags changes has the scope of the Build makefile they are defined in.
+
+
+Dependencies
+------------
+
+For each built object file 'a.o' the '.a.cmd' is created and holds:
+
+ - Command line used to built that object
+ (for each object)
+
+ - Dependency rules generated by 'gcc -Wp,-MD,...'
+ (for compiled object)
+
+All existing '.cmd' files are included in the Build process to follow properly
+the dependencies and trigger a rebuild when necessary.
+
+
+Single rules
+------------
+
+It's possible to build single object file by choice, like:
+
+ $ make util/map.o # objects
+ $ make util/map.i # preprocessor
+ $ make util/map.s # assembly
diff --git a/tools/build/Makefile b/tools/build/Makefile
new file mode 100644
index 0000000..a930362
--- /dev/null
+++ b/tools/build/Makefile
@@ -0,0 +1,43 @@
+ifeq ($(srctree),)
+srctree := $(patsubst %/,%,$(dir $(shell pwd)))
+srctree := $(patsubst %/,%,$(dir $(srctree)))
+endif
+
+include $(srctree)/tools//scripts/Makefile.include
+
+define allow-override
+ $(if $(or $(findstring environment,$(origin $(1))),\
+ $(findstring command line,$(origin $(1)))),,\
+ $(eval $(1) = $(2)))
+endef
+
+$(call allow-override,CC,$(CROSS_COMPILE)gcc)
+$(call allow-override,LD,$(CROSS_COMPILE)ld)
+
+ifeq ($(V),1)
+ Q =
+else
+ Q = @
+endif
+
+export Q srctree CC LD
+
+MAKEFLAGS := --no-print-directory
+build := -f $(srctree)/tools/build/Makefile.build dir=. obj
+
+all: fixdep
+
+clean:
+ $(call QUIET_CLEAN, fixdep)
+ $(Q)find . -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
+ $(Q)rm -f fixdep
+
+$(OUTPUT)fixdep-in.o: FORCE
+ $(Q)$(MAKE) $(build)=fixdep
+
+$(OUTPUT)fixdep: $(OUTPUT)fixdep-in.o
+ $(QUIET_LINK)$(CC) $(LDFLAGS) -o $@ $<
+
+FORCE:
+
+.PHONY: FORCE
diff --git a/tools/build/Makefile.build b/tools/build/Makefile.build
new file mode 100644
index 0000000..4a96473
--- /dev/null
+++ b/tools/build/Makefile.build
@@ -0,0 +1,139 @@
+###
+# Main build makefile.
+#
+# Lots of this code have been borrowed or heavily inspired from parts
+# of kbuild code, which is not credited, but mostly developed by:
+#
+# Copyright (C) Sam Ravnborg <sam@mars.ravnborg.org>, 2015
+# Copyright (C) Linus Torvalds <torvalds@linux-foundation.org>, 2015
+#
+
+PHONY := __build
+__build:
+
+ifeq ($(V),1)
+ quiet =
+ Q =
+else
+ quiet=quiet_
+ Q=@
+endif
+
+build-dir := $(srctree)/tools/build
+
+# Define $(fixdep) for dep-cmd function
+ifeq ($(OUTPUT),)
+ fixdep := $(build-dir)/fixdep
+else
+ fixdep := $(OUTPUT)/fixdep
+endif
+
+# Generic definitions
+include $(build-dir)/Build.include
+
+# do not force detected configuration
+-include $(OUTPUT).config-detected
+
+# Init all relevant variables used in build files so
+# 1) they have correct type
+# 2) they do not inherit any value from the environment
+subdir-y :=
+obj-y :=
+subdir-y :=
+subdir-obj-y :=
+
+# Build definitions
+build-file := $(dir)/Build
+-include $(build-file)
+
+quiet_cmd_flex = FLEX $@
+quiet_cmd_bison = BISON $@
+
+# Create directory unless it exists
+quiet_cmd_mkdir = MKDIR $(dir $@)
+ cmd_mkdir = mkdir -p $(dir $@)
+ rule_mkdir = $(if $(wildcard $(dir $@)),,@$(call echo-cmd,mkdir) $(cmd_mkdir))
+
+# Compile command
+quiet_cmd_cc_o_c = CC $@
+ cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+
+quiet_cmd_cc_i_c = CPP $@
+ cmd_cc_i_c = $(CC) $(c_flags) -E -o $@ $<
+
+quiet_cmd_cc_s_c = AS $@
+ cmd_cc_s_c = $(CC) $(c_flags) -S -o $@ $<
+
+quiet_cmd_gen = GEN $@
+
+# Link agregate command
+# If there's nothing to link, create empty $@ object.
+quiet_cmd_ld_multi = LD $@
+ cmd_ld_multi = $(if $(strip $(obj-y)),\
+ $(LD) -r -o $@ $(filter $(obj-y),$^),rm -f $@; $(AR) rcs $@)
+
+# Build rules
+$(OUTPUT)%.o: %.c FORCE
+ $(call rule_mkdir)
+ $(call if_changed_dep,cc_o_c)
+
+$(OUTPUT)%.o: %.S FORCE
+ $(call rule_mkdir)
+ $(call if_changed_dep,cc_o_c)
+
+$(OUTPUT)%.i: %.c FORCE
+ $(call rule_mkdir)
+ $(call if_changed_dep,cc_i_c)
+
+$(OUTPUT)%.i: %.S FORCE
+ $(call rule_mkdir)
+ $(call if_changed_dep,cc_i_c)
+
+$(OUTPUT)%.s: %.c FORCE
+ $(call rule_mkdir)
+ $(call if_changed_dep,cc_s_c)
+
+# Gather build data:
+# obj-y - list of build objects
+# subdir-y - list of directories to nest
+# subdir-obj-y - list of directories objects 'dir/$(obj)-in.o'
+obj-y := $($(obj)-y)
+subdir-y := $(patsubst %/,%,$(filter %/, $(obj-y)))
+obj-y := $(patsubst %/, %/$(obj)-in.o, $(obj-y))
+subdir-obj-y := $(filter %/$(obj)-in.o, $(obj-y))
+
+# '$(OUTPUT)/dir' prefix to all objects
+objprefix := $(subst ./,,$(OUTPUT)$(dir)/)
+obj-y := $(addprefix $(objprefix),$(obj-y))
+subdir-obj-y := $(addprefix $(objprefix),$(subdir-obj-y))
+
+# Final '$(obj)-in.o' object
+in-target := $(objprefix)$(obj)-in.o
+
+PHONY += $(subdir-y)
+
+$(subdir-y):
+ $(Q)$(MAKE) -f $(build-dir)/Makefile.build dir=$(dir)/$@ obj=$(obj)
+
+$(sort $(subdir-obj-y)): $(subdir-y) ;
+
+$(in-target): $(obj-y) FORCE
+ $(call rule_mkdir)
+ $(call if_changed,ld_multi)
+
+__build: $(in-target)
+ @:
+
+PHONY += FORCE
+FORCE:
+
+# Include all cmd files to get all the dependency rules
+# for all objects included
+targets := $(wildcard $(sort $(obj-y) $(in-target) $(MAKECMDGOALS)))
+cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
+
+ifneq ($(cmd_files),)
+ include $(cmd_files)
+endif
+
+.PHONY: $(PHONY)
diff --git a/tools/build/Makefile.feature b/tools/build/Makefile.feature
new file mode 100644
index 0000000..37ff4c9
--- /dev/null
+++ b/tools/build/Makefile.feature
@@ -0,0 +1,178 @@
+feature_dir := $(srctree)/tools/build/feature
+
+ifneq ($(OUTPUT),)
+ OUTPUT_FEATURES = $(OUTPUT)feature/
+ $(shell mkdir -p $(OUTPUT_FEATURES))
+endif
+
+feature_check = $(eval $(feature_check_code))
+define feature_check_code
+ feature-$(1) := $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS) $(FEATURE_CHECK_CFLAGS-$(1))" LDFLAGS="$(LDFLAGS) $(FEATURE_CHECK_LDFLAGS-$(1))" -C $(feature_dir) test-$1.bin >/dev/null 2>/dev/null && echo 1 || echo 0)
+endef
+
+feature_set = $(eval $(feature_set_code))
+define feature_set_code
+ feature-$(1) := 1
+endef
+
+#
+# Build the feature check binaries in parallel, ignore errors, ignore return value and suppress output:
+#
+
+#
+# Note that this is not a complete list of all feature tests, just
+# those that are typically built on a fully configured system.
+#
+# [ Feature tests not mentioned here have to be built explicitly in
+# the rule that uses them - an example for that is the 'bionic'
+# feature check. ]
+#
+FEATURE_TESTS ?= \
+ backtrace \
+ dwarf \
+ fortify-source \
+ sync-compare-and-swap \
+ glibc \
+ gtk2 \
+ gtk2-infobar \
+ libaudit \
+ libbfd \
+ libelf \
+ libelf-getphdrnum \
+ libelf-mmap \
+ libnuma \
+ numa_num_possible_cpus \
+ libperl \
+ libpython \
+ libpython-version \
+ libslang \
+ libunwind \
+ pthread-attr-setaffinity-np \
+ stackprotector-all \
+ timerfd \
+ libdw-dwarf-unwind \
+ zlib \
+ lzma \
+ get_cpuid \
+ bpf
+
+FEATURE_DISPLAY ?= \
+ dwarf \
+ glibc \
+ gtk2 \
+ libaudit \
+ libbfd \
+ libelf \
+ libnuma \
+ numa_num_possible_cpus \
+ libperl \
+ libpython \
+ libslang \
+ libunwind \
+ libdw-dwarf-unwind \
+ zlib \
+ lzma \
+ get_cpuid \
+ bpf
+
+# Set FEATURE_CHECK_(C|LD)FLAGS-all for all FEATURE_TESTS features.
+# If in the future we need per-feature checks/flags for features not
+# mentioned in this list we need to refactor this ;-).
+set_test_all_flags = $(eval $(set_test_all_flags_code))
+define set_test_all_flags_code
+ FEATURE_CHECK_CFLAGS-all += $(FEATURE_CHECK_CFLAGS-$(1))
+ FEATURE_CHECK_LDFLAGS-all += $(FEATURE_CHECK_LDFLAGS-$(1))
+endef
+
+$(foreach feat,$(FEATURE_TESTS),$(call set_test_all_flags,$(feat)))
+
+#
+# Special fast-path for the 'all features are available' case:
+#
+$(call feature_check,all,$(MSG))
+
+#
+# Just in case the build freshly failed, make sure we print the
+# feature matrix:
+#
+ifeq ($(feature-all), 1)
+ #
+ # test-all.c passed - just set all the core feature flags to 1:
+ #
+ $(foreach feat,$(FEATURE_TESTS),$(call feature_set,$(feat)))
+else
+ $(shell $(MAKE) OUTPUT=$(OUTPUT_FEATURES) CFLAGS="$(EXTRA_CFLAGS)" LDFLAGS=$(LDFLAGS) -i -j -C $(feature_dir) $(addsuffix .bin,$(FEATURE_TESTS)) >/dev/null 2>&1)
+ $(foreach feat,$(FEATURE_TESTS),$(call feature_check,$(feat)))
+endif
+
+#
+# Print the result of the feature test:
+#
+feature_print_status = $(eval $(feature_print_status_code)) $(info $(MSG))
+
+define feature_print_status_code
+ ifeq ($(feature-$(1)), 1)
+ MSG = $(shell printf '...%30s: [ \033[32mon\033[m ]' $(1))
+ else
+ MSG = $(shell printf '...%30s: [ \033[31mOFF\033[m ]' $(1))
+ endif
+endef
+
+feature_print_text = $(eval $(feature_print_text_code)) $(info $(MSG))
+define feature_print_text_code
+ MSG = $(shell printf '...%30s: %s' $(1) $(2))
+endef
+
+FEATURE_DUMP_FILENAME = $(OUTPUT)FEATURE-DUMP$(FEATURE_USER)
+FEATURE_DUMP := $(foreach feat,$(FEATURE_DISPLAY),feature-$(feat)($(feature-$(feat))))
+FEATURE_DUMP_FILE := $(shell touch $(FEATURE_DUMP_FILENAME); cat $(FEATURE_DUMP_FILENAME))
+
+ifeq ($(dwarf-post-unwind),1)
+ FEATURE_DUMP += dwarf-post-unwind($(dwarf-post-unwind-text))
+endif
+
+# The $(feature_display) controls the default detection message
+# output. It's set if:
+# - detected features differes from stored features from
+# last build (in $(FEATURE_DUMP_FILENAME) file)
+# - one of the $(FEATURE_DISPLAY) is not detected
+# - VF is enabled
+
+ifneq ("$(FEATURE_DUMP)","$(FEATURE_DUMP_FILE)")
+ $(shell echo "$(FEATURE_DUMP)" > $(FEATURE_DUMP_FILENAME))
+ feature_display := 1
+endif
+
+feature_display_check = $(eval $(feature_check_display_code))
+define feature_display_check_code
+ ifneq ($(feature-$(1)), 1)
+ feature_display := 1
+ endif
+endef
+
+$(foreach feat,$(FEATURE_DISPLAY),$(call feature_display_check,$(feat)))
+
+ifeq ($(VF),1)
+ feature_display := 1
+ feature_verbose := 1
+endif
+
+ifeq ($(feature_display),1)
+ $(info )
+ $(info Auto-detecting system features:)
+ $(foreach feat,$(FEATURE_DISPLAY),$(call feature_print_status,$(feat),))
+
+ ifeq ($(dwarf-post-unwind),1)
+ $(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text))
+ endif
+
+ ifneq ($(feature_verbose),1)
+ $(info )
+ endif
+endif
+
+ifeq ($(feature_verbose),1)
+ TMP := $(filter-out $(FEATURE_DISPLAY),$(FEATURE_TESTS))
+ $(foreach feat,$(TMP),$(call feature_print_status,$(feat),))
+ $(info )
+endif
diff --git a/tools/build/Makefile.include b/tools/build/Makefile.include
new file mode 100644
index 0000000..4e09ad6
--- /dev/null
+++ b/tools/build/Makefile.include
@@ -0,0 +1,10 @@
+build := -f $(srctree)/tools/build/Makefile.build dir=. obj
+
+ifdef CROSS_COMPILE
+fixdep:
+else
+fixdep:
+ $(Q)$(MAKE) -C $(srctree)/tools/build fixdep
+endif
+
+.PHONY: fixdep
diff --git a/tools/build/feature/.gitignore b/tools/build/feature/.gitignore
new file mode 100644
index 0000000..09b335b
--- /dev/null
+++ b/tools/build/feature/.gitignore
@@ -0,0 +1,3 @@
+*.d
+*.bin
+*.output
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
new file mode 100644
index 0000000..cea04ce
--- /dev/null
+++ b/tools/build/feature/Makefile
@@ -0,0 +1,181 @@
+
+FILES= \
+ test-all.bin \
+ test-backtrace.bin \
+ test-bionic.bin \
+ test-dwarf.bin \
+ test-fortify-source.bin \
+ test-sync-compare-and-swap.bin \
+ test-glibc.bin \
+ test-gtk2.bin \
+ test-gtk2-infobar.bin \
+ test-hello.bin \
+ test-libaudit.bin \
+ test-libbfd.bin \
+ test-liberty.bin \
+ test-liberty-z.bin \
+ test-cplus-demangle.bin \
+ test-libelf.bin \
+ test-libelf-getphdrnum.bin \
+ test-libelf-mmap.bin \
+ test-libnuma.bin \
+ test-numa_num_possible_cpus.bin \
+ test-libperl.bin \
+ test-libpython.bin \
+ test-libpython-version.bin \
+ test-libslang.bin \
+ test-libunwind.bin \
+ test-libunwind-debug-frame.bin \
+ test-pthread-attr-setaffinity-np.bin \
+ test-stackprotector-all.bin \
+ test-timerfd.bin \
+ test-libdw-dwarf-unwind.bin \
+ test-libbabeltrace.bin \
+ test-compile-32.bin \
+ test-compile-x32.bin \
+ test-zlib.bin \
+ test-lzma.bin \
+ test-bpf.bin \
+ test-get_cpuid.bin
+
+CC := $(CROSS_COMPILE)gcc -MD
+PKG_CONFIG := $(CROSS_COMPILE)pkg-config
+
+all: $(FILES)
+
+__BUILD = $(CC) $(CFLAGS) -Wall -Werror -o $(OUTPUT)$@ $(patsubst %.bin,%.c,$@) $(LDFLAGS)
+ BUILD = $(__BUILD) > $(OUTPUT)$(@:.bin=.make.output) 2>&1
+
+###############################
+
+test-all.bin:
+ $(BUILD) -fstack-protector-all -O2 -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lelf -laudit -I/usr/include/slang -lslang $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl -lz -llzma
+
+test-hello.bin:
+ $(BUILD)
+
+test-pthread-attr-setaffinity-np.bin:
+ $(BUILD) -D_GNU_SOURCE -lpthread
+
+test-stackprotector-all.bin:
+ $(BUILD) -fstack-protector-all
+
+test-fortify-source.bin:
+ $(BUILD) -O2 -D_FORTIFY_SOURCE=2
+
+test-bionic.bin:
+ $(BUILD)
+
+test-libelf.bin:
+ $(BUILD) -lelf
+
+test-glibc.bin:
+ $(BUILD)
+
+DWARFLIBS := -ldw
+ifeq ($(findstring -static,${LDFLAGS}),-static)
+DWARFLIBS += -lelf -lebl -lz -llzma -lbz2
+endif
+
+test-dwarf.bin:
+ $(BUILD) $(DWARFLIBS)
+
+test-libelf-mmap.bin:
+ $(BUILD) -lelf
+
+test-libelf-getphdrnum.bin:
+ $(BUILD) -lelf
+
+test-libnuma.bin:
+ $(BUILD) -lnuma
+
+test-numa_num_possible_cpus.bin:
+ $(BUILD) -lnuma
+
+test-libunwind.bin:
+ $(BUILD) -lelf
+
+test-libunwind-debug-frame.bin:
+ $(BUILD) -lelf
+
+test-libaudit.bin:
+ $(BUILD) -laudit
+
+test-libslang.bin:
+ $(BUILD) -I/usr/include/slang -lslang
+
+test-gtk2.bin:
+ $(BUILD) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
+
+test-gtk2-infobar.bin:
+ $(BUILD) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
+
+grep-libs = $(filter -l%,$(1))
+strip-libs = $(filter-out -l%,$(1))
+
+PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
+PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
+PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
+PERL_EMBED_CCOPTS = `perl -MExtUtils::Embed -e ccopts 2>/dev/null`
+FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
+
+test-libperl.bin:
+ $(BUILD) $(FLAGS_PERL_EMBED)
+
+test-libpython.bin:
+ $(BUILD)
+
+test-libpython-version.bin:
+ $(BUILD)
+
+test-libbfd.bin:
+ $(BUILD) -DPACKAGE='"perf"' -lbfd -lz -liberty -ldl
+
+test-liberty.bin:
+ $(CC) $(CFLAGS) -Wall -Werror -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' $(LDFLAGS) -lbfd -ldl -liberty
+
+test-liberty-z.bin:
+ $(CC) $(CFLAGS) -Wall -Werror -o $(OUTPUT)$@ test-libbfd.c -DPACKAGE='"perf"' $(LDFLAGS) -lbfd -ldl -liberty -lz
+
+test-cplus-demangle.bin:
+ $(BUILD) -liberty
+
+test-backtrace.bin:
+ $(BUILD)
+
+test-timerfd.bin:
+ $(BUILD)
+
+test-libdw-dwarf-unwind.bin:
+ $(BUILD) # -ldw provided by $(FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind)
+
+test-libbabeltrace.bin:
+ $(BUILD) # -lbabeltrace provided by $(FEATURE_CHECK_LDFLAGS-libbabeltrace)
+
+test-sync-compare-and-swap.bin:
+ $(BUILD)
+
+test-compile-32.bin:
+ $(CC) -m32 -o $(OUTPUT)$@ test-compile.c
+
+test-compile-x32.bin:
+ $(CC) -mx32 -o $(OUTPUT)$@ test-compile.c
+
+test-zlib.bin:
+ $(BUILD) -lz
+
+test-lzma.bin:
+ $(BUILD) -llzma
+
+test-get_cpuid.bin:
+ $(BUILD)
+
+test-bpf.bin:
+ $(BUILD)
+
+-include *.d
+
+###############################
+
+clean:
+ rm -f $(FILES) *.d $(FILES:.bin=.make.output)
diff --git a/tools/build/feature/test-all.c b/tools/build/feature/test-all.c
new file mode 100644
index 0000000..33cf6f2
--- /dev/null
+++ b/tools/build/feature/test-all.c
@@ -0,0 +1,158 @@
+/*
+ * test-all.c: Try to build all the main testcases at once.
+ *
+ * A well-configured system will have all the prereqs installed, so we can speed
+ * up auto-detection on such systems.
+ */
+
+/*
+ * Quirk: Python and Perl headers cannot be in arbitrary places, so keep
+ * these 3 testcases at the top:
+ */
+#define main main_test_libpython
+# include "test-libpython.c"
+#undef main
+
+#define main main_test_libpython_version
+# include "test-libpython-version.c"
+#undef main
+
+#define main main_test_libperl
+# include "test-libperl.c"
+#undef main
+
+#define main main_test_hello
+# include "test-hello.c"
+#undef main
+
+#define main main_test_libelf
+# include "test-libelf.c"
+#undef main
+
+#define main main_test_libelf_mmap
+# include "test-libelf-mmap.c"
+#undef main
+
+#define main main_test_glibc
+# include "test-glibc.c"
+#undef main
+
+#define main main_test_dwarf
+# include "test-dwarf.c"
+#undef main
+
+#define main main_test_libelf_getphdrnum
+# include "test-libelf-getphdrnum.c"
+#undef main
+
+#define main main_test_libunwind
+# include "test-libunwind.c"
+#undef main
+
+#define main main_test_libaudit
+# include "test-libaudit.c"
+#undef main
+
+#define main main_test_libslang
+# include "test-libslang.c"
+#undef main
+
+#define main main_test_gtk2
+# include "test-gtk2.c"
+#undef main
+
+#define main main_test_gtk2_infobar
+# include "test-gtk2-infobar.c"
+#undef main
+
+#define main main_test_libbfd
+# include "test-libbfd.c"
+#undef main
+
+#define main main_test_backtrace
+# include "test-backtrace.c"
+#undef main
+
+#define main main_test_libnuma
+# include "test-libnuma.c"
+#undef main
+
+#define main main_test_numa_num_possible_cpus
+# include "test-numa_num_possible_cpus.c"
+#undef main
+
+#define main main_test_timerfd
+# include "test-timerfd.c"
+#undef main
+
+#define main main_test_stackprotector_all
+# include "test-stackprotector-all.c"
+#undef main
+
+#define main main_test_libdw_dwarf_unwind
+# include "test-libdw-dwarf-unwind.c"
+#undef main
+
+#define main main_test_sync_compare_and_swap
+# include "test-sync-compare-and-swap.c"
+#undef main
+
+#define main main_test_zlib
+# include "test-zlib.c"
+#undef main
+
+#define main main_test_pthread_attr_setaffinity_np
+# include "test-pthread-attr-setaffinity-np.c"
+#undef main
+
+# if 0
+/*
+ * Disable libbabeltrace check for test-all, because the requested
+ * library version is not released yet in most distributions. Will
+ * reenable later.
+ */
+
+#define main main_test_libbabeltrace
+# include "test-libbabeltrace.c"
+#undef main
+#endif
+
+#define main main_test_lzma
+# include "test-lzma.c"
+#undef main
+
+#define main main_test_get_cpuid
+# include "test-get_cpuid.c"
+#undef main
+
+int main(int argc, char *argv[])
+{
+ main_test_libpython();
+ main_test_libpython_version();
+ main_test_libperl();
+ main_test_hello();
+ main_test_libelf();
+ main_test_libelf_mmap();
+ main_test_glibc();
+ main_test_dwarf();
+ main_test_libelf_getphdrnum();
+ main_test_libunwind();
+ main_test_libaudit();
+ main_test_libslang();
+ main_test_gtk2(argc, argv);
+ main_test_gtk2_infobar(argc, argv);
+ main_test_libbfd();
+ main_test_backtrace();
+ main_test_libnuma();
+ main_test_numa_num_possible_cpus();
+ main_test_timerfd();
+ main_test_stackprotector_all();
+ main_test_libdw_dwarf_unwind();
+ main_test_sync_compare_and_swap(argc, argv);
+ main_test_zlib();
+ main_test_pthread_attr_setaffinity_np();
+ main_test_lzma();
+ main_test_get_cpuid();
+
+ return 0;
+}
diff --git a/tools/build/feature/test-backtrace.c b/tools/build/feature/test-backtrace.c
new file mode 100644
index 0000000..7124aa1
--- /dev/null
+++ b/tools/build/feature/test-backtrace.c
@@ -0,0 +1,13 @@
+#include <execinfo.h>
+#include <stdio.h>
+
+int main(void)
+{
+ void *backtrace_fns[10];
+ size_t entries;
+
+ entries = backtrace(backtrace_fns, 10);
+ backtrace_symbols_fd(backtrace_fns, entries, 1);
+
+ return 0;
+}
diff --git a/tools/build/feature/test-bionic.c b/tools/build/feature/test-bionic.c
new file mode 100644
index 0000000..eac24e9
--- /dev/null
+++ b/tools/build/feature/test-bionic.c
@@ -0,0 +1,6 @@
+#include <android/api-level.h>
+
+int main(void)
+{
+ return __ANDROID_API__;
+}
diff --git a/tools/build/feature/test-bpf.c b/tools/build/feature/test-bpf.c
new file mode 100644
index 0000000..062bac8
--- /dev/null
+++ b/tools/build/feature/test-bpf.c
@@ -0,0 +1,18 @@
+#include <linux/bpf.h>
+
+int main(void)
+{
+ union bpf_attr attr;
+
+ attr.prog_type = BPF_PROG_TYPE_KPROBE;
+ attr.insn_cnt = 0;
+ attr.insns = 0;
+ attr.license = 0;
+ attr.log_buf = 0;
+ attr.log_size = 0;
+ attr.log_level = 0;
+ attr.kern_version = 0;
+
+ attr = attr;
+ return 0;
+}
diff --git a/tools/build/feature/test-compile.c b/tools/build/feature/test-compile.c
new file mode 100644
index 0000000..31dbf45
--- /dev/null
+++ b/tools/build/feature/test-compile.c
@@ -0,0 +1,4 @@
+int main(void)
+{
+ return 0;
+}
diff --git a/tools/build/feature/test-cplus-demangle.c b/tools/build/feature/test-cplus-demangle.c
new file mode 100644
index 0000000..610c686
--- /dev/null
+++ b/tools/build/feature/test-cplus-demangle.c
@@ -0,0 +1,14 @@
+extern int printf(const char *format, ...);
+extern char *cplus_demangle(const char *, int);
+
+int main(void)
+{
+ char symbol[4096] = "FieldName__9ClassNameFd";
+ char *tmp;
+
+ tmp = cplus_demangle(symbol, 0);
+
+ printf("demangled symbol: {%s}\n", tmp);
+
+ return 0;
+}
diff --git a/tools/build/feature/test-dwarf.c b/tools/build/feature/test-dwarf.c
new file mode 100644
index 0000000..3fc1801
--- /dev/null
+++ b/tools/build/feature/test-dwarf.c
@@ -0,0 +1,10 @@
+#include <dwarf.h>
+#include <elfutils/libdw.h>
+#include <elfutils/version.h>
+
+int main(void)
+{
+ Dwarf *dbg = dwarf_begin(0, DWARF_C_READ);
+
+ return (long)dbg;
+}
diff --git a/tools/build/feature/test-fortify-source.c b/tools/build/feature/test-fortify-source.c
new file mode 100644
index 0000000..c9f398d
--- /dev/null
+++ b/tools/build/feature/test-fortify-source.c
@@ -0,0 +1,6 @@
+#include <stdio.h>
+
+int main(void)
+{
+ return puts("hi");
+}
diff --git a/tools/build/feature/test-get_cpuid.c b/tools/build/feature/test-get_cpuid.c
new file mode 100644
index 0000000..d7a2c40
--- /dev/null
+++ b/tools/build/feature/test-get_cpuid.c
@@ -0,0 +1,7 @@
+#include <cpuid.h>
+
+int main(void)
+{
+ unsigned int eax = 0, ebx = 0, ecx = 0, edx = 0;
+ return __get_cpuid(0x15, &eax, &ebx, &ecx, &edx);
+}
diff --git a/tools/build/feature/test-glibc.c b/tools/build/feature/test-glibc.c
new file mode 100644
index 0000000..9367f75
--- /dev/null
+++ b/tools/build/feature/test-glibc.c
@@ -0,0 +1,19 @@
+#include <stdlib.h>
+
+#if !defined(__UCLIBC__)
+#include <gnu/libc-version.h>
+#else
+#define XSTR(s) STR(s)
+#define STR(s) #s
+#endif
+
+int main(void)
+{
+#if !defined(__UCLIBC__)
+ const char *version = gnu_get_libc_version();
+#else
+ const char *version = XSTR(__GLIBC__) "." XSTR(__GLIBC_MINOR__);
+#endif
+
+ return (long)version;
+}
diff --git a/tools/build/feature/test-gtk2-infobar.c b/tools/build/feature/test-gtk2-infobar.c
new file mode 100644
index 0000000..397b464
--- /dev/null
+++ b/tools/build/feature/test-gtk2-infobar.c
@@ -0,0 +1,11 @@
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#include <gtk/gtk.h>
+#pragma GCC diagnostic error "-Wstrict-prototypes"
+
+int main(int argc, char *argv[])
+{
+ gtk_init(&argc, &argv);
+ gtk_info_bar_new();
+
+ return 0;
+}
diff --git a/tools/build/feature/test-gtk2.c b/tools/build/feature/test-gtk2.c
new file mode 100644
index 0000000..6bd80e5
--- /dev/null
+++ b/tools/build/feature/test-gtk2.c
@@ -0,0 +1,10 @@
+#pragma GCC diagnostic ignored "-Wstrict-prototypes"
+#include <gtk/gtk.h>
+#pragma GCC diagnostic error "-Wstrict-prototypes"
+
+int main(int argc, char *argv[])
+{
+ gtk_init(&argc, &argv);
+
+ return 0;
+}
diff --git a/tools/build/feature/test-hello.c b/tools/build/feature/test-hello.c
new file mode 100644
index 0000000..c9f398d
--- /dev/null
+++ b/tools/build/feature/test-hello.c
@@ -0,0 +1,6 @@
+#include <stdio.h>
+
+int main(void)
+{
+ return puts("hi");
+}
diff --git a/tools/build/feature/test-libaudit.c b/tools/build/feature/test-libaudit.c
new file mode 100644
index 0000000..afc019f
--- /dev/null
+++ b/tools/build/feature/test-libaudit.c
@@ -0,0 +1,10 @@
+#include <libaudit.h>
+
+extern int printf(const char *format, ...);
+
+int main(void)
+{
+ printf("error message: %s\n", audit_errno_to_name(0));
+
+ return audit_open();
+}
diff --git a/tools/build/feature/test-libbabeltrace.c b/tools/build/feature/test-libbabeltrace.c
new file mode 100644
index 0000000..9cf802a
--- /dev/null
+++ b/tools/build/feature/test-libbabeltrace.c
@@ -0,0 +1,9 @@
+
+#include <babeltrace/ctf-writer/writer.h>
+#include <babeltrace/ctf-ir/stream-class.h>
+
+int main(void)
+{
+ bt_ctf_stream_class_get_packet_context_type((void *) 0);
+ return 0;
+}
diff --git a/tools/build/feature/test-libbfd.c b/tools/build/feature/test-libbfd.c
new file mode 100644
index 0000000..2405990
--- /dev/null
+++ b/tools/build/feature/test-libbfd.c
@@ -0,0 +1,15 @@
+#include <bfd.h>
+
+extern int printf(const char *format, ...);
+
+int main(void)
+{
+ char symbol[4096] = "FieldName__9ClassNameFd";
+ char *tmp;
+
+ tmp = bfd_demangle(0, symbol, 0);
+
+ printf("demangled symbol: {%s}\n", tmp);
+
+ return 0;
+}
diff --git a/tools/build/feature/test-libdw-dwarf-unwind.c b/tools/build/feature/test-libdw-dwarf-unwind.c
new file mode 100644
index 0000000..f676a3f
--- /dev/null
+++ b/tools/build/feature/test-libdw-dwarf-unwind.c
@@ -0,0 +1,13 @@
+
+#include <elfutils/libdwfl.h>
+
+int main(void)
+{
+ /*
+ * This function is guarded via: __nonnull_attribute__ (1, 2).
+ * Passing '1' as arguments value. This code is never executed,
+ * only compiled.
+ */
+ dwfl_thread_getframes((void *) 1, (void *) 1, NULL);
+ return 0;
+}
diff --git a/tools/build/feature/test-libelf-getphdrnum.c b/tools/build/feature/test-libelf-getphdrnum.c
new file mode 100644
index 0000000..d710459
--- /dev/null
+++ b/tools/build/feature/test-libelf-getphdrnum.c
@@ -0,0 +1,8 @@
+#include <libelf.h>
+
+int main(void)
+{
+ size_t dst;
+
+ return elf_getphdrnum(0, &dst);
+}
diff --git a/tools/build/feature/test-libelf-mmap.c b/tools/build/feature/test-libelf-mmap.c
new file mode 100644
index 0000000..564427d
--- /dev/null
+++ b/tools/build/feature/test-libelf-mmap.c
@@ -0,0 +1,8 @@
+#include <libelf.h>
+
+int main(void)
+{
+ Elf *elf = elf_begin(0, ELF_C_READ_MMAP, 0);
+
+ return (long)elf;
+}
diff --git a/tools/build/feature/test-libelf.c b/tools/build/feature/test-libelf.c
new file mode 100644
index 0000000..08db322
--- /dev/null
+++ b/tools/build/feature/test-libelf.c
@@ -0,0 +1,8 @@
+#include <libelf.h>
+
+int main(void)
+{
+ Elf *elf = elf_begin(0, ELF_C_READ, 0);
+
+ return (long)elf;
+}
diff --git a/tools/build/feature/test-libnuma.c b/tools/build/feature/test-libnuma.c
new file mode 100644
index 0000000..4763d9c
--- /dev/null
+++ b/tools/build/feature/test-libnuma.c
@@ -0,0 +1,9 @@
+#include <numa.h>
+#include <numaif.h>
+
+int main(void)
+{
+ numa_available();
+
+ return 0;
+}
diff --git a/tools/build/feature/test-libperl.c b/tools/build/feature/test-libperl.c
new file mode 100644
index 0000000..8871f6a
--- /dev/null
+++ b/tools/build/feature/test-libperl.c
@@ -0,0 +1,9 @@
+#include <EXTERN.h>
+#include <perl.h>
+
+int main(void)
+{
+ perl_alloc();
+
+ return 0;
+}
diff --git a/tools/build/feature/test-libpython-version.c b/tools/build/feature/test-libpython-version.c
new file mode 100644
index 0000000..facea12
--- /dev/null
+++ b/tools/build/feature/test-libpython-version.c
@@ -0,0 +1,10 @@
+#include <Python.h>
+
+#if PY_VERSION_HEX >= 0x03000000
+ #error
+#endif
+
+int main(void)
+{
+ return 0;
+}
diff --git a/tools/build/feature/test-libpython.c b/tools/build/feature/test-libpython.c
new file mode 100644
index 0000000..b24b28a
--- /dev/null
+++ b/tools/build/feature/test-libpython.c
@@ -0,0 +1,8 @@
+#include <Python.h>
+
+int main(void)
+{
+ Py_Initialize();
+
+ return 0;
+}
diff --git a/tools/build/feature/test-libslang.c b/tools/build/feature/test-libslang.c
new file mode 100644
index 0000000..22ff22e
--- /dev/null
+++ b/tools/build/feature/test-libslang.c
@@ -0,0 +1,6 @@
+#include <slang.h>
+
+int main(void)
+{
+ return SLsmg_init_smg();
+}
diff --git a/tools/build/feature/test-libunwind-debug-frame.c b/tools/build/feature/test-libunwind-debug-frame.c
new file mode 100644
index 0000000..0ef8087
--- /dev/null
+++ b/tools/build/feature/test-libunwind-debug-frame.c
@@ -0,0 +1,16 @@
+#include <libunwind.h>
+#include <stdlib.h>
+
+extern int
+UNW_OBJ(dwarf_find_debug_frame) (int found, unw_dyn_info_t *di_debug,
+ unw_word_t ip, unw_word_t segbase,
+ const char *obj_name, unw_word_t start,
+ unw_word_t end);
+
+#define dwarf_find_debug_frame UNW_OBJ(dwarf_find_debug_frame)
+
+int main(void)
+{
+ dwarf_find_debug_frame(0, NULL, 0, 0, NULL, 0, 0);
+ return 0;
+}
diff --git a/tools/build/feature/test-libunwind.c b/tools/build/feature/test-libunwind.c
new file mode 100644
index 0000000..43b9369
--- /dev/null
+++ b/tools/build/feature/test-libunwind.c
@@ -0,0 +1,27 @@
+#include <libunwind.h>
+#include <stdlib.h>
+
+extern int UNW_OBJ(dwarf_search_unwind_table) (unw_addr_space_t as,
+ unw_word_t ip,
+ unw_dyn_info_t *di,
+ unw_proc_info_t *pi,
+ int need_unwind_info, void *arg);
+
+
+#define dwarf_search_unwind_table UNW_OBJ(dwarf_search_unwind_table)
+
+static unw_accessors_t accessors;
+
+int main(void)
+{
+ unw_addr_space_t addr_space;
+
+ addr_space = unw_create_addr_space(&accessors, 0);
+ if (addr_space)
+ return 0;
+
+ unw_init_remote(NULL, addr_space, NULL);
+ dwarf_search_unwind_table(addr_space, 0, NULL, NULL, 0, NULL);
+
+ return 0;
+}
diff --git a/tools/build/feature/test-lzma.c b/tools/build/feature/test-lzma.c
new file mode 100644
index 0000000..95adc8c
--- /dev/null
+++ b/tools/build/feature/test-lzma.c
@@ -0,0 +1,10 @@
+#include <lzma.h>
+
+int main(void)
+{
+ lzma_stream strm = LZMA_STREAM_INIT;
+ int ret;
+
+ ret = lzma_stream_decoder(&strm, UINT64_MAX, LZMA_CONCATENATED);
+ return ret ? -1 : 0;
+}
diff --git a/tools/build/feature/test-numa_num_possible_cpus.c b/tools/build/feature/test-numa_num_possible_cpus.c
new file mode 100644
index 0000000..2606e94
--- /dev/null
+++ b/tools/build/feature/test-numa_num_possible_cpus.c
@@ -0,0 +1,6 @@
+#include <numa.h>
+
+int main(void)
+{
+ return numa_num_possible_cpus();
+}
diff --git a/tools/build/feature/test-pthread-attr-setaffinity-np.c b/tools/build/feature/test-pthread-attr-setaffinity-np.c
new file mode 100644
index 0000000..fdada5e
--- /dev/null
+++ b/tools/build/feature/test-pthread-attr-setaffinity-np.c
@@ -0,0 +1,17 @@
+#include <stdint.h>
+#include <pthread.h>
+#include <sched.h>
+
+int main(void)
+{
+ int ret = 0;
+ pthread_attr_t thread_attr;
+ cpu_set_t cs;
+
+ pthread_attr_init(&thread_attr);
+ CPU_ZERO(&cs);
+
+ ret = pthread_attr_setaffinity_np(&thread_attr, sizeof(cs), &cs);
+
+ return ret;
+}
diff --git a/tools/build/feature/test-stackprotector-all.c b/tools/build/feature/test-stackprotector-all.c
new file mode 100644
index 0000000..c9f398d
--- /dev/null
+++ b/tools/build/feature/test-stackprotector-all.c
@@ -0,0 +1,6 @@
+#include <stdio.h>
+
+int main(void)
+{
+ return puts("hi");
+}
diff --git a/tools/build/feature/test-sync-compare-and-swap.c b/tools/build/feature/test-sync-compare-and-swap.c
new file mode 100644
index 0000000..c34d4ca
--- /dev/null
+++ b/tools/build/feature/test-sync-compare-and-swap.c
@@ -0,0 +1,14 @@
+#include <stdint.h>
+
+volatile uint64_t x;
+
+int main(int argc, char *argv[])
+{
+ uint64_t old, new = argc;
+
+ argv = argv;
+ do {
+ old = __sync_val_compare_and_swap(&x, 0, 0);
+ } while (!__sync_bool_compare_and_swap(&x, old, new));
+ return old == new;
+}
diff --git a/tools/build/feature/test-timerfd.c b/tools/build/feature/test-timerfd.c
new file mode 100644
index 0000000..8c5c083
--- /dev/null
+++ b/tools/build/feature/test-timerfd.c
@@ -0,0 +1,18 @@
+/*
+ * test for timerfd functions used by perf-kvm-stat-live
+ */
+#include <sys/timerfd.h>
+
+int main(void)
+{
+ struct itimerspec new_value;
+
+ int fd = timerfd_create(CLOCK_MONOTONIC, TFD_NONBLOCK);
+ if (fd < 0)
+ return 1;
+
+ if (timerfd_settime(fd, 0, &new_value, NULL) != 0)
+ return 1;
+
+ return 0;
+}
diff --git a/tools/build/feature/test-zlib.c b/tools/build/feature/test-zlib.c
new file mode 100644
index 0000000..e111fff
--- /dev/null
+++ b/tools/build/feature/test-zlib.c
@@ -0,0 +1,9 @@
+#include <zlib.h>
+
+int main(void)
+{
+ z_stream zs;
+
+ inflateInit(&zs);
+ return 0;
+}
diff --git a/tools/build/fixdep.c b/tools/build/fixdep.c
new file mode 100644
index 0000000..1521d36
--- /dev/null
+++ b/tools/build/fixdep.c
@@ -0,0 +1,168 @@
+/*
+ * "Optimize" a list of dependencies as spit out by gcc -MD
+ * for the build framework.
+ *
+ * Original author:
+ * Copyright 2002 by Kai Germaschewski <kai.germaschewski@gmx.de>
+ *
+ * This code has been borrowed from kbuild's fixdep (scripts/basic/fixdep.c),
+ * Please check it for detailed explanation. This fixdep borow only the
+ * base transformation of dependecies without the CONFIG mangle.
+ */
+
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <unistd.h>
+#include <fcntl.h>
+#include <string.h>
+#include <stdlib.h>
+#include <stdio.h>
+#include <limits.h>
+
+char *target;
+char *depfile;
+char *cmdline;
+
+static void usage(void)
+{
+ fprintf(stderr, "Usage: fixdep <depfile> <target> <cmdline>\n");
+ exit(1);
+}
+
+/*
+ * Print out the commandline prefixed with cmd_<target filename> :=
+ */
+static void print_cmdline(void)
+{
+ printf("cmd_%s := %s\n\n", target, cmdline);
+}
+
+/*
+ * Important: The below generated source_foo.o and deps_foo.o variable
+ * assignments are parsed not only by make, but also by the rather simple
+ * parser in scripts/mod/sumversion.c.
+ */
+static void parse_dep_file(void *map, size_t len)
+{
+ char *m = map;
+ char *end = m + len;
+ char *p;
+ char s[PATH_MAX];
+ int is_target;
+ int saw_any_target = 0;
+ int is_first_dep = 0;
+
+ while (m < end) {
+ /* Skip any "white space" */
+ while (m < end && (*m == ' ' || *m == '\\' || *m == '\n'))
+ m++;
+ /* Find next "white space" */
+ p = m;
+ while (p < end && *p != ' ' && *p != '\\' && *p != '\n')
+ p++;
+ /* Is the token we found a target name? */
+ is_target = (*(p-1) == ':');
+ /* Don't write any target names into the dependency file */
+ if (is_target) {
+ /* The /next/ file is the first dependency */
+ is_first_dep = 1;
+ } else {
+ /* Save this token/filename */
+ memcpy(s, m, p-m);
+ s[p - m] = 0;
+
+ /*
+ * Do not list the source file as dependency,
+ * so that kbuild is not confused if a .c file
+ * is rewritten into .S or vice versa. Storing
+ * it in source_* is needed for modpost to
+ * compute srcversions.
+ */
+ if (is_first_dep) {
+ /*
+ * If processing the concatenation of
+ * multiple dependency files, only
+ * process the first target name, which
+ * will be the original source name,
+ * and ignore any other target names,
+ * which will be intermediate temporary
+ * files.
+ */
+ if (!saw_any_target) {
+ saw_any_target = 1;
+ printf("source_%s := %s\n\n",
+ target, s);
+ printf("deps_%s := \\\n",
+ target);
+ }
+ is_first_dep = 0;
+ } else
+ printf(" %s \\\n", s);
+ }
+ /*
+ * Start searching for next token immediately after the first
+ * "whitespace" character that follows this token.
+ */
+ m = p + 1;
+ }
+
+ if (!saw_any_target) {
+ fprintf(stderr, "fixdep: parse error; no targets found\n");
+ exit(1);
+ }
+
+ printf("\n%s: $(deps_%s)\n\n", target, target);
+ printf("$(deps_%s):\n", target);
+}
+
+static void print_deps(void)
+{
+ struct stat st;
+ int fd;
+ void *map;
+
+ fd = open(depfile, O_RDONLY);
+ if (fd < 0) {
+ fprintf(stderr, "fixdep: error opening depfile: ");
+ perror(depfile);
+ exit(2);
+ }
+ if (fstat(fd, &st) < 0) {
+ fprintf(stderr, "fixdep: error fstat'ing depfile: ");
+ perror(depfile);
+ exit(2);
+ }
+ if (st.st_size == 0) {
+ fprintf(stderr, "fixdep: %s is empty\n", depfile);
+ close(fd);
+ return;
+ }
+ map = mmap(NULL, st.st_size, PROT_READ, MAP_PRIVATE, fd, 0);
+ if ((long) map == -1) {
+ perror("fixdep: mmap");
+ close(fd);
+ return;
+ }
+
+ parse_dep_file(map, st.st_size);
+
+ munmap(map, st.st_size);
+
+ close(fd);
+}
+
+int main(int argc, char **argv)
+{
+ if (argc != 4)
+ usage();
+
+ depfile = argv[1];
+ target = argv[2];
+ cmdline = argv[3];
+
+ print_cmdline();
+ print_deps();
+
+ return 0;
+}
diff --git a/tools/build/tests/ex/Build b/tools/build/tests/ex/Build
new file mode 100644
index 0000000..4d502f9
--- /dev/null
+++ b/tools/build/tests/ex/Build
@@ -0,0 +1,11 @@
+ex-y += ex.o
+ex-y += a.o
+ex-y += b.o
+ex-y += b.o
+ex-y += empty/
+ex-y += empty2/
+ex-y += inc.o
+
+libex-y += c.o
+libex-y += d.o
+libex-y += arch/
diff --git a/tools/build/tests/ex/Makefile b/tools/build/tests/ex/Makefile
new file mode 100644
index 0000000..c50d578
--- /dev/null
+++ b/tools/build/tests/ex/Makefile
@@ -0,0 +1,26 @@
+export srctree := $(abspath ../../../..)
+export CC := gcc
+export LD := ld
+export AR := ar
+
+ex:
+
+include $(srctree)/tools/build/Makefile.include
+
+ex: ex-in.o libex-in.o
+ gcc -o $@ $^
+
+ex.%: fixdep FORCE
+ make -f $(srctree)/tools/build/Makefile.build dir=. $@
+
+ex-in.o: fixdep FORCE
+ make $(build)=ex
+
+libex-in.o: fixdep FORCE
+ make $(build)=libex
+
+clean:
+ find . -name '*.o' -delete -o -name '\.*.cmd' -delete -o -name '\.*.d' -delete
+ rm -f ex ex.i ex.s
+
+.PHONY: FORCE
diff --git a/tools/build/tests/ex/a.c b/tools/build/tests/ex/a.c
new file mode 100644
index 0000000..8517627
--- /dev/null
+++ b/tools/build/tests/ex/a.c
@@ -0,0 +1,5 @@
+
+int a(void)
+{
+ return 0;
+}
diff --git a/tools/build/tests/ex/arch/Build b/tools/build/tests/ex/arch/Build
new file mode 100644
index 0000000..5550618
--- /dev/null
+++ b/tools/build/tests/ex/arch/Build
@@ -0,0 +1,2 @@
+libex-y += e.o
+libex-y += f.o
diff --git a/tools/build/tests/ex/arch/e.c b/tools/build/tests/ex/arch/e.c
new file mode 100644
index 0000000..beaa4a1
--- /dev/null
+++ b/tools/build/tests/ex/arch/e.c
@@ -0,0 +1,5 @@
+
+int e(void)
+{
+ return 0;
+}
diff --git a/tools/build/tests/ex/arch/f.c b/tools/build/tests/ex/arch/f.c
new file mode 100644
index 0000000..7c3e9e9
--- /dev/null
+++ b/tools/build/tests/ex/arch/f.c
@@ -0,0 +1,5 @@
+
+int f(void)
+{
+ return 0;
+}
diff --git a/tools/build/tests/ex/b.c b/tools/build/tests/ex/b.c
new file mode 100644
index 0000000..c24ff9c
--- /dev/null
+++ b/tools/build/tests/ex/b.c
@@ -0,0 +1,5 @@
+
+int b(void)
+{
+ return 0;
+}
diff --git a/tools/build/tests/ex/c.c b/tools/build/tests/ex/c.c
new file mode 100644
index 0000000..e216d02
--- /dev/null
+++ b/tools/build/tests/ex/c.c
@@ -0,0 +1,5 @@
+
+int c(void)
+{
+ return 0;
+}
diff --git a/tools/build/tests/ex/d.c b/tools/build/tests/ex/d.c
new file mode 100644
index 0000000..80dc0f0
--- /dev/null
+++ b/tools/build/tests/ex/d.c
@@ -0,0 +1,5 @@
+
+int d(void)
+{
+ return 0;
+}
diff --git a/tools/build/tests/ex/empty/Build b/tools/build/tests/ex/empty/Build
new file mode 100644
index 0000000..e69de29
--- /dev/null
+++ b/tools/build/tests/ex/empty/Build
diff --git a/tools/build/tests/ex/empty2/README b/tools/build/tests/ex/empty2/README
new file mode 100644
index 0000000..2107cc5
--- /dev/null
+++ b/tools/build/tests/ex/empty2/README
@@ -0,0 +1,2 @@
+This directory is left intentionally without Build file
+to test proper nesting into Build-less directories.
diff --git a/tools/build/tests/ex/ex.c b/tools/build/tests/ex/ex.c
new file mode 100644
index 0000000..57de607
--- /dev/null
+++ b/tools/build/tests/ex/ex.c
@@ -0,0 +1,21 @@
+
+int a(void);
+int b(void);
+int c(void);
+int d(void);
+int e(void);
+int f(void);
+int inc(void);
+
+int main(void)
+{
+ a();
+ b();
+ c();
+ d();
+ e();
+ f();
+ inc();
+
+ return 0;
+}
diff --git a/tools/build/tests/ex/inc.c b/tools/build/tests/ex/inc.c
new file mode 100644
index 0000000..c20f1e9
--- /dev/null
+++ b/tools/build/tests/ex/inc.c
@@ -0,0 +1,8 @@
+#ifdef INCLUDE
+#include "krava.h"
+#endif
+
+int inc(void)
+{
+ return 0;
+}
diff --git a/tools/build/tests/run.sh b/tools/build/tests/run.sh
new file mode 100755
index 0000000..44d2a0f
--- /dev/null
+++ b/tools/build/tests/run.sh
@@ -0,0 +1,69 @@
+#!/bin/sh
+
+function test_ex {
+ make -C ex V=1 clean > ex.out 2>&1
+ make -C ex V=1 >> ex.out 2>&1
+
+ if [ ! -x ./ex/ex ]; then
+ echo FAILED
+ exit -1
+ fi
+
+ make -C ex V=1 clean > /dev/null 2>&1
+ rm -f ex.out
+}
+
+function test_ex_suffix {
+ make -C ex V=1 clean > ex.out 2>&1
+
+ # use -rR to disable make's builtin rules
+ make -rR -C ex V=1 ex.o >> ex.out 2>&1
+ make -rR -C ex V=1 ex.i >> ex.out 2>&1
+ make -rR -C ex V=1 ex.s >> ex.out 2>&1
+
+ if [ -x ./ex/ex ]; then
+ echo FAILED
+ exit -1
+ fi
+
+ if [ ! -f ./ex/ex.o -o ! -f ./ex/ex.i -o ! -f ./ex/ex.s ]; then
+ echo FAILED
+ exit -1
+ fi
+
+ make -C ex V=1 clean > /dev/null 2>&1
+ rm -f ex.out
+}
+
+function test_ex_include {
+ make -C ex V=1 clean > ex.out 2>&1
+
+ # build with krava.h include
+ touch ex/krava.h
+ make -C ex V=1 CFLAGS=-DINCLUDE >> ex.out 2>&1
+
+ if [ ! -x ./ex/ex ]; then
+ echo FAILED
+ exit -1
+ fi
+
+ # build without the include
+ rm -f ex/krava.h ex/ex
+ make -C ex V=1 >> ex.out 2>&1
+
+ if [ ! -x ./ex/ex ]; then
+ echo FAILED
+ exit -1
+ fi
+
+ make -C ex V=1 clean > /dev/null 2>&1
+ rm -f ex.out
+}
+
+echo -n Testing..
+
+test_ex
+test_ex_suffix
+test_ex_include
+
+echo OK