| # Makefile for the different targets used to generate full packages of a kernel |
| # It uses the generic clean infrastructure of kbuild |
| |
| # RPM target |
| # --------------------------------------------------------------------------- |
| # The rpm target generates two rpm files: |
| # /usr/src/packages/SRPMS/kernel-2.6.7rc2-1.src.rpm |
| # /usr/src/packages/RPMS/i386/kernel-2.6.7rc2-1.<arch>.rpm |
| # The src.rpm files includes all source for the kernel being built |
| # The <arch>.rpm includes kernel configuration, modules etc. |
| # |
| # Process to create the rpm files |
| # a) clean the kernel |
| # b) Generate .spec file |
| # c) Build a tar ball, using symlink to make kernel version |
| # first entry in the path |
| # d) and pack the result to a tar.gz file |
| # e) generate the rpm files, based on kernel.spec |
| # - Use /. to avoid tar packing just the symlink |
| |
| # Note that the rpm-pkg target cannot be used with KBUILD_OUTPUT, |
| # but the binrpm-pkg target can; for some reason O= gets ignored. |
| |
| # Remove hyphens since they have special meaning in RPM filenames |
| KERNELPATH := kernel-$(subst -,_,$(KERNELRELEASE)) |
| KDEB_SOURCENAME ?= linux-$(KERNELRELEASE) |
| export KDEB_SOURCENAME |
| # Include only those top-level files that are needed by make, plus the GPL copy |
| TAR_CONTENT := $(KBUILD_ALLDIRS) .config .scmversion Makefile \ |
| Kbuild Kconfig COPYING $(wildcard localversion*) |
| MKSPEC := $(srctree)/scripts/package/mkspec |
| |
| quiet_cmd_src_tar = TAR $(2).tar.gz |
| cmd_src_tar = \ |
| if test "$(objtree)" != "$(srctree)"; then \ |
| echo "Building source tarball is not possible outside the"; \ |
| echo "kernel source tree. Don't set KBUILD_OUTPUT, or use the"; \ |
| echo "binrpm-pkg or bindeb-pkg target instead."; \ |
| false; \ |
| fi ; \ |
| $(srctree)/scripts/setlocalversion --save-scmversion; \ |
| ln -sf $(srctree) $(2); \ |
| tar -cz $(RCS_TAR_IGNORE) -f $(2).tar.gz \ |
| $(addprefix $(2)/,$(TAR_CONTENT) $(3)); \ |
| rm -f $(2) $(objtree)/.scmversion |
| |
| # rpm-pkg |
| # --------------------------------------------------------------------------- |
| rpm-pkg rpm: FORCE |
| $(MAKE) clean |
| $(CONFIG_SHELL) $(MKSPEC) >$(objtree)/kernel.spec |
| $(call cmd,src_tar,$(KERNELPATH),kernel.spec) |
| $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version |
| mv -f $(objtree)/.tmp_version $(objtree)/.version |
| rpmbuild $(RPMOPTS) --target $(UTS_MACHINE) -ta $(KERNELPATH).tar.gz |
| rm $(KERNELPATH).tar.gz kernel.spec |
| |
| # binrpm-pkg |
| # --------------------------------------------------------------------------- |
| binrpm-pkg: FORCE |
| $(MAKE) KBUILD_SRC= |
| $(CONFIG_SHELL) $(MKSPEC) prebuilt > $(objtree)/binkernel.spec |
| $(CONFIG_SHELL) $(srctree)/scripts/mkversion > $(objtree)/.tmp_version |
| mv -f $(objtree)/.tmp_version $(objtree)/.version |
| |
| rpmbuild $(RPMOPTS) --define "_builddir $(objtree)" --target \ |
| $(UTS_MACHINE) -bb $(objtree)/binkernel.spec |
| rm binkernel.spec |
| |
| # Deb target |
| # --------------------------------------------------------------------------- |
| quiet_cmd_builddeb = BUILDDEB |
| cmd_builddeb = set -e; \ |
| test `id -u` = 0 || \ |
| test -n "$(KBUILD_PKG_ROOTCMD)" || { \ |
| which fakeroot >/dev/null 2>&1 && \ |
| KBUILD_PKG_ROOTCMD="fakeroot -u"; \ |
| } || { \ |
| echo; \ |
| echo "builddeb must be run as root (or using fakeroot)."; \ |
| echo "KBUILD_PKG_ROOTCMD is unset and fakeroot not found."; \ |
| echo "Try setting KBUILD_PKG_ROOTCMD to a command to acquire"; \ |
| echo "root privileges (e.g., 'fakeroot -u' or 'sudo')."; \ |
| false; \ |
| } && \ |
| \ |
| $$KBUILD_PKG_ROOTCMD $(CONFIG_SHELL) \ |
| $(srctree)/scripts/package/builddeb $@ |
| |
| deb-pkg: FORCE |
| $(MAKE) clean |
| $(call cmd,src_tar,$(KDEB_SOURCENAME)) |
| $(MAKE) KBUILD_SRC= |
| +$(call cmd,builddeb) |
| |
| bindeb-pkg: FORCE |
| $(MAKE) KBUILD_SRC= |
| +$(call cmd,builddeb) |
| |
| clean-dirs += $(objtree)/debian/ |
| |
| |
| # tarball targets |
| # --------------------------------------------------------------------------- |
| tar%pkg: FORCE |
| $(MAKE) KBUILD_SRC= |
| $(CONFIG_SHELL) $(srctree)/scripts/package/buildtar $@ |
| |
| clean-dirs += $(objtree)/tar-install/ |
| |
| |
| # perf-pkg - generate a source tarball with perf source |
| # --------------------------------------------------------------------------- |
| |
| perf-tar=perf-$(KERNELVERSION) |
| |
| quiet_cmd_perf_tar = TAR |
| cmd_perf_tar = \ |
| git --git-dir=$(srctree)/.git archive --prefix=$(perf-tar)/ \ |
| HEAD^{tree} $$(cd $(srctree); \ |
| echo $$(cat $(srctree)/tools/perf/MANIFEST)) \ |
| -o $(perf-tar).tar; \ |
| mkdir -p $(perf-tar); \ |
| git --git-dir=$(srctree)/.git rev-parse HEAD > $(perf-tar)/HEAD; \ |
| (cd $(srctree)/tools/perf; \ |
| util/PERF-VERSION-GEN ../../$(perf-tar)/ 2>/dev/null); \ |
| tar rf $(perf-tar).tar $(perf-tar)/HEAD $(perf-tar)/PERF-VERSION-FILE; \ |
| rm -r $(perf-tar); \ |
| $(if $(findstring tar-src,$@),, \ |
| $(if $(findstring bz2,$@),bzip2, \ |
| $(if $(findstring gz,$@),gzip, \ |
| $(if $(findstring xz,$@),xz, \ |
| $(error unknown target $@)))) \ |
| -f -9 $(perf-tar).tar) |
| |
| perf-%pkg: FORCE |
| $(call cmd,perf_tar) |
| |
| # Help text displayed when executing 'make help' |
| # --------------------------------------------------------------------------- |
| help: FORCE |
| @echo ' rpm-pkg - Build both source and binary RPM kernel packages' |
| @echo ' binrpm-pkg - Build only the binary kernel RPM package' |
| @echo ' deb-pkg - Build both source and binary deb kernel packages' |
| @echo ' bindeb-pkg - Build only the binary kernel deb package' |
| @echo ' tar-pkg - Build the kernel as an uncompressed tarball' |
| @echo ' targz-pkg - Build the kernel as a gzip compressed tarball' |
| @echo ' tarbz2-pkg - Build the kernel as a bzip2 compressed tarball' |
| @echo ' tarxz-pkg - Build the kernel as a xz compressed tarball' |
| @echo ' perf-tar-src-pkg - Build $(perf-tar).tar source tarball' |
| @echo ' perf-targz-src-pkg - Build $(perf-tar).tar.gz source tarball' |
| @echo ' perf-tarbz2-src-pkg - Build $(perf-tar).tar.bz2 source tarball' |
| @echo ' perf-tarxz-src-pkg - Build $(perf-tar).tar.xz source tarball' |