Kyle Swenson | 8d8f654 | 2021-03-15 11:02:55 -0600 | [diff] [blame^] | 1 | /* |
| 2 | * Support for the Tundra Universe I/II VME-PCI Bridge Chips |
| 3 | * |
| 4 | * Author: Martyn Welch <martyn.welch@ge.com> |
| 5 | * Copyright 2008 GE Intelligent Platforms Embedded Systems, Inc. |
| 6 | * |
| 7 | * Based on work by Tom Armistead and Ajit Prem |
| 8 | * Copyright 2004 Motorola Inc. |
| 9 | * |
| 10 | * Derived from ca91c042.c by Michael Wyrick |
| 11 | * |
| 12 | * This program is free software; you can redistribute it and/or modify it |
| 13 | * under the terms of the GNU General Public License as published by the |
| 14 | * Free Software Foundation; either version 2 of the License, or (at your |
| 15 | * option) any later version. |
| 16 | */ |
| 17 | |
| 18 | #include <linux/module.h> |
| 19 | #include <linux/mm.h> |
| 20 | #include <linux/types.h> |
| 21 | #include <linux/errno.h> |
| 22 | #include <linux/pci.h> |
| 23 | #include <linux/dma-mapping.h> |
| 24 | #include <linux/poll.h> |
| 25 | #include <linux/interrupt.h> |
| 26 | #include <linux/spinlock.h> |
| 27 | #include <linux/sched.h> |
| 28 | #include <linux/slab.h> |
| 29 | #include <linux/time.h> |
| 30 | #include <linux/io.h> |
| 31 | #include <linux/uaccess.h> |
| 32 | #include <linux/vme.h> |
| 33 | |
| 34 | #include "../vme_bridge.h" |
| 35 | #include "vme_ca91cx42.h" |
| 36 | |
| 37 | static int ca91cx42_probe(struct pci_dev *, const struct pci_device_id *); |
| 38 | static void ca91cx42_remove(struct pci_dev *); |
| 39 | |
| 40 | /* Module parameters */ |
| 41 | static int geoid; |
| 42 | |
| 43 | static const char driver_name[] = "vme_ca91cx42"; |
| 44 | |
| 45 | static const struct pci_device_id ca91cx42_ids[] = { |
| 46 | { PCI_DEVICE(PCI_VENDOR_ID_TUNDRA, PCI_DEVICE_ID_TUNDRA_CA91C142) }, |
| 47 | { }, |
| 48 | }; |
| 49 | |
| 50 | static struct pci_driver ca91cx42_driver = { |
| 51 | .name = driver_name, |
| 52 | .id_table = ca91cx42_ids, |
| 53 | .probe = ca91cx42_probe, |
| 54 | .remove = ca91cx42_remove, |
| 55 | }; |
| 56 | |
| 57 | static u32 ca91cx42_DMA_irqhandler(struct ca91cx42_driver *bridge) |
| 58 | { |
| 59 | wake_up(&bridge->dma_queue); |
| 60 | |
| 61 | return CA91CX42_LINT_DMA; |
| 62 | } |
| 63 | |
| 64 | static u32 ca91cx42_LM_irqhandler(struct ca91cx42_driver *bridge, u32 stat) |
| 65 | { |
| 66 | int i; |
| 67 | u32 serviced = 0; |
| 68 | |
| 69 | for (i = 0; i < 4; i++) { |
| 70 | if (stat & CA91CX42_LINT_LM[i]) { |
| 71 | /* We only enable interrupts if the callback is set */ |
| 72 | bridge->lm_callback[i](i); |
| 73 | serviced |= CA91CX42_LINT_LM[i]; |
| 74 | } |
| 75 | } |
| 76 | |
| 77 | return serviced; |
| 78 | } |
| 79 | |
| 80 | /* XXX This needs to be split into 4 queues */ |
| 81 | static u32 ca91cx42_MB_irqhandler(struct ca91cx42_driver *bridge, int mbox_mask) |
| 82 | { |
| 83 | wake_up(&bridge->mbox_queue); |
| 84 | |
| 85 | return CA91CX42_LINT_MBOX; |
| 86 | } |
| 87 | |
| 88 | static u32 ca91cx42_IACK_irqhandler(struct ca91cx42_driver *bridge) |
| 89 | { |
| 90 | wake_up(&bridge->iack_queue); |
| 91 | |
| 92 | return CA91CX42_LINT_SW_IACK; |
| 93 | } |
| 94 | |
| 95 | static u32 ca91cx42_VERR_irqhandler(struct vme_bridge *ca91cx42_bridge) |
| 96 | { |
| 97 | int val; |
| 98 | struct ca91cx42_driver *bridge; |
| 99 | |
| 100 | bridge = ca91cx42_bridge->driver_priv; |
| 101 | |
| 102 | val = ioread32(bridge->base + DGCS); |
| 103 | |
| 104 | if (!(val & 0x00000800)) { |
| 105 | dev_err(ca91cx42_bridge->parent, "ca91cx42_VERR_irqhandler DMA " |
| 106 | "Read Error DGCS=%08X\n", val); |
| 107 | } |
| 108 | |
| 109 | return CA91CX42_LINT_VERR; |
| 110 | } |
| 111 | |
| 112 | static u32 ca91cx42_LERR_irqhandler(struct vme_bridge *ca91cx42_bridge) |
| 113 | { |
| 114 | int val; |
| 115 | struct ca91cx42_driver *bridge; |
| 116 | |
| 117 | bridge = ca91cx42_bridge->driver_priv; |
| 118 | |
| 119 | val = ioread32(bridge->base + DGCS); |
| 120 | |
| 121 | if (!(val & 0x00000800)) |
| 122 | dev_err(ca91cx42_bridge->parent, "ca91cx42_LERR_irqhandler DMA " |
| 123 | "Read Error DGCS=%08X\n", val); |
| 124 | |
| 125 | return CA91CX42_LINT_LERR; |
| 126 | } |
| 127 | |
| 128 | |
| 129 | static u32 ca91cx42_VIRQ_irqhandler(struct vme_bridge *ca91cx42_bridge, |
| 130 | int stat) |
| 131 | { |
| 132 | int vec, i, serviced = 0; |
| 133 | struct ca91cx42_driver *bridge; |
| 134 | |
| 135 | bridge = ca91cx42_bridge->driver_priv; |
| 136 | |
| 137 | |
| 138 | for (i = 7; i > 0; i--) { |
| 139 | if (stat & (1 << i)) { |
| 140 | vec = ioread32(bridge->base + |
| 141 | CA91CX42_V_STATID[i]) & 0xff; |
| 142 | |
| 143 | vme_irq_handler(ca91cx42_bridge, i, vec); |
| 144 | |
| 145 | serviced |= (1 << i); |
| 146 | } |
| 147 | } |
| 148 | |
| 149 | return serviced; |
| 150 | } |
| 151 | |
| 152 | static irqreturn_t ca91cx42_irqhandler(int irq, void *ptr) |
| 153 | { |
| 154 | u32 stat, enable, serviced = 0; |
| 155 | struct vme_bridge *ca91cx42_bridge; |
| 156 | struct ca91cx42_driver *bridge; |
| 157 | |
| 158 | ca91cx42_bridge = ptr; |
| 159 | |
| 160 | bridge = ca91cx42_bridge->driver_priv; |
| 161 | |
| 162 | enable = ioread32(bridge->base + LINT_EN); |
| 163 | stat = ioread32(bridge->base + LINT_STAT); |
| 164 | |
| 165 | /* Only look at unmasked interrupts */ |
| 166 | stat &= enable; |
| 167 | |
| 168 | if (unlikely(!stat)) |
| 169 | return IRQ_NONE; |
| 170 | |
| 171 | if (stat & CA91CX42_LINT_DMA) |
| 172 | serviced |= ca91cx42_DMA_irqhandler(bridge); |
| 173 | if (stat & (CA91CX42_LINT_LM0 | CA91CX42_LINT_LM1 | CA91CX42_LINT_LM2 | |
| 174 | CA91CX42_LINT_LM3)) |
| 175 | serviced |= ca91cx42_LM_irqhandler(bridge, stat); |
| 176 | if (stat & CA91CX42_LINT_MBOX) |
| 177 | serviced |= ca91cx42_MB_irqhandler(bridge, stat); |
| 178 | if (stat & CA91CX42_LINT_SW_IACK) |
| 179 | serviced |= ca91cx42_IACK_irqhandler(bridge); |
| 180 | if (stat & CA91CX42_LINT_VERR) |
| 181 | serviced |= ca91cx42_VERR_irqhandler(ca91cx42_bridge); |
| 182 | if (stat & CA91CX42_LINT_LERR) |
| 183 | serviced |= ca91cx42_LERR_irqhandler(ca91cx42_bridge); |
| 184 | if (stat & (CA91CX42_LINT_VIRQ1 | CA91CX42_LINT_VIRQ2 | |
| 185 | CA91CX42_LINT_VIRQ3 | CA91CX42_LINT_VIRQ4 | |
| 186 | CA91CX42_LINT_VIRQ5 | CA91CX42_LINT_VIRQ6 | |
| 187 | CA91CX42_LINT_VIRQ7)) |
| 188 | serviced |= ca91cx42_VIRQ_irqhandler(ca91cx42_bridge, stat); |
| 189 | |
| 190 | /* Clear serviced interrupts */ |
| 191 | iowrite32(serviced, bridge->base + LINT_STAT); |
| 192 | |
| 193 | return IRQ_HANDLED; |
| 194 | } |
| 195 | |
| 196 | static int ca91cx42_irq_init(struct vme_bridge *ca91cx42_bridge) |
| 197 | { |
| 198 | int result, tmp; |
| 199 | struct pci_dev *pdev; |
| 200 | struct ca91cx42_driver *bridge; |
| 201 | |
| 202 | bridge = ca91cx42_bridge->driver_priv; |
| 203 | |
| 204 | /* Need pdev */ |
| 205 | pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, dev); |
| 206 | |
| 207 | INIT_LIST_HEAD(&ca91cx42_bridge->vme_error_handlers); |
| 208 | |
| 209 | mutex_init(&ca91cx42_bridge->irq_mtx); |
| 210 | |
| 211 | /* Disable interrupts from PCI to VME */ |
| 212 | iowrite32(0, bridge->base + VINT_EN); |
| 213 | |
| 214 | /* Disable PCI interrupts */ |
| 215 | iowrite32(0, bridge->base + LINT_EN); |
| 216 | /* Clear Any Pending PCI Interrupts */ |
| 217 | iowrite32(0x00FFFFFF, bridge->base + LINT_STAT); |
| 218 | |
| 219 | result = request_irq(pdev->irq, ca91cx42_irqhandler, IRQF_SHARED, |
| 220 | driver_name, ca91cx42_bridge); |
| 221 | if (result) { |
| 222 | dev_err(&pdev->dev, "Can't get assigned pci irq vector %02X\n", |
| 223 | pdev->irq); |
| 224 | return result; |
| 225 | } |
| 226 | |
| 227 | /* Ensure all interrupts are mapped to PCI Interrupt 0 */ |
| 228 | iowrite32(0, bridge->base + LINT_MAP0); |
| 229 | iowrite32(0, bridge->base + LINT_MAP1); |
| 230 | iowrite32(0, bridge->base + LINT_MAP2); |
| 231 | |
| 232 | /* Enable DMA, mailbox & LM Interrupts */ |
| 233 | tmp = CA91CX42_LINT_MBOX3 | CA91CX42_LINT_MBOX2 | CA91CX42_LINT_MBOX1 | |
| 234 | CA91CX42_LINT_MBOX0 | CA91CX42_LINT_SW_IACK | |
| 235 | CA91CX42_LINT_VERR | CA91CX42_LINT_LERR | CA91CX42_LINT_DMA; |
| 236 | |
| 237 | iowrite32(tmp, bridge->base + LINT_EN); |
| 238 | |
| 239 | return 0; |
| 240 | } |
| 241 | |
| 242 | static void ca91cx42_irq_exit(struct ca91cx42_driver *bridge, |
| 243 | struct pci_dev *pdev) |
| 244 | { |
| 245 | struct vme_bridge *ca91cx42_bridge; |
| 246 | |
| 247 | /* Disable interrupts from PCI to VME */ |
| 248 | iowrite32(0, bridge->base + VINT_EN); |
| 249 | |
| 250 | /* Disable PCI interrupts */ |
| 251 | iowrite32(0, bridge->base + LINT_EN); |
| 252 | /* Clear Any Pending PCI Interrupts */ |
| 253 | iowrite32(0x00FFFFFF, bridge->base + LINT_STAT); |
| 254 | |
| 255 | ca91cx42_bridge = container_of((void *)bridge, struct vme_bridge, |
| 256 | driver_priv); |
| 257 | free_irq(pdev->irq, ca91cx42_bridge); |
| 258 | } |
| 259 | |
| 260 | static int ca91cx42_iack_received(struct ca91cx42_driver *bridge, int level) |
| 261 | { |
| 262 | u32 tmp; |
| 263 | |
| 264 | tmp = ioread32(bridge->base + LINT_STAT); |
| 265 | |
| 266 | if (tmp & (1 << level)) |
| 267 | return 0; |
| 268 | else |
| 269 | return 1; |
| 270 | } |
| 271 | |
| 272 | /* |
| 273 | * Set up an VME interrupt |
| 274 | */ |
| 275 | static void ca91cx42_irq_set(struct vme_bridge *ca91cx42_bridge, int level, |
| 276 | int state, int sync) |
| 277 | |
| 278 | { |
| 279 | struct pci_dev *pdev; |
| 280 | u32 tmp; |
| 281 | struct ca91cx42_driver *bridge; |
| 282 | |
| 283 | bridge = ca91cx42_bridge->driver_priv; |
| 284 | |
| 285 | /* Enable IRQ level */ |
| 286 | tmp = ioread32(bridge->base + LINT_EN); |
| 287 | |
| 288 | if (state == 0) |
| 289 | tmp &= ~CA91CX42_LINT_VIRQ[level]; |
| 290 | else |
| 291 | tmp |= CA91CX42_LINT_VIRQ[level]; |
| 292 | |
| 293 | iowrite32(tmp, bridge->base + LINT_EN); |
| 294 | |
| 295 | if ((state == 0) && (sync != 0)) { |
| 296 | pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, |
| 297 | dev); |
| 298 | |
| 299 | synchronize_irq(pdev->irq); |
| 300 | } |
| 301 | } |
| 302 | |
| 303 | static int ca91cx42_irq_generate(struct vme_bridge *ca91cx42_bridge, int level, |
| 304 | int statid) |
| 305 | { |
| 306 | u32 tmp; |
| 307 | struct ca91cx42_driver *bridge; |
| 308 | |
| 309 | bridge = ca91cx42_bridge->driver_priv; |
| 310 | |
| 311 | /* Universe can only generate even vectors */ |
| 312 | if (statid & 1) |
| 313 | return -EINVAL; |
| 314 | |
| 315 | mutex_lock(&bridge->vme_int); |
| 316 | |
| 317 | tmp = ioread32(bridge->base + VINT_EN); |
| 318 | |
| 319 | /* Set Status/ID */ |
| 320 | iowrite32(statid << 24, bridge->base + STATID); |
| 321 | |
| 322 | /* Assert VMEbus IRQ */ |
| 323 | tmp = tmp | (1 << (level + 24)); |
| 324 | iowrite32(tmp, bridge->base + VINT_EN); |
| 325 | |
| 326 | /* Wait for IACK */ |
| 327 | wait_event_interruptible(bridge->iack_queue, |
| 328 | ca91cx42_iack_received(bridge, level)); |
| 329 | |
| 330 | /* Return interrupt to low state */ |
| 331 | tmp = ioread32(bridge->base + VINT_EN); |
| 332 | tmp = tmp & ~(1 << (level + 24)); |
| 333 | iowrite32(tmp, bridge->base + VINT_EN); |
| 334 | |
| 335 | mutex_unlock(&bridge->vme_int); |
| 336 | |
| 337 | return 0; |
| 338 | } |
| 339 | |
| 340 | static int ca91cx42_slave_set(struct vme_slave_resource *image, int enabled, |
| 341 | unsigned long long vme_base, unsigned long long size, |
| 342 | dma_addr_t pci_base, u32 aspace, u32 cycle) |
| 343 | { |
| 344 | unsigned int i, addr = 0, granularity; |
| 345 | unsigned int temp_ctl = 0; |
| 346 | unsigned int vme_bound, pci_offset; |
| 347 | struct vme_bridge *ca91cx42_bridge; |
| 348 | struct ca91cx42_driver *bridge; |
| 349 | |
| 350 | ca91cx42_bridge = image->parent; |
| 351 | |
| 352 | bridge = ca91cx42_bridge->driver_priv; |
| 353 | |
| 354 | i = image->number; |
| 355 | |
| 356 | switch (aspace) { |
| 357 | case VME_A16: |
| 358 | addr |= CA91CX42_VSI_CTL_VAS_A16; |
| 359 | break; |
| 360 | case VME_A24: |
| 361 | addr |= CA91CX42_VSI_CTL_VAS_A24; |
| 362 | break; |
| 363 | case VME_A32: |
| 364 | addr |= CA91CX42_VSI_CTL_VAS_A32; |
| 365 | break; |
| 366 | case VME_USER1: |
| 367 | addr |= CA91CX42_VSI_CTL_VAS_USER1; |
| 368 | break; |
| 369 | case VME_USER2: |
| 370 | addr |= CA91CX42_VSI_CTL_VAS_USER2; |
| 371 | break; |
| 372 | case VME_A64: |
| 373 | case VME_CRCSR: |
| 374 | case VME_USER3: |
| 375 | case VME_USER4: |
| 376 | default: |
| 377 | dev_err(ca91cx42_bridge->parent, "Invalid address space\n"); |
| 378 | return -EINVAL; |
| 379 | break; |
| 380 | } |
| 381 | |
| 382 | /* |
| 383 | * Bound address is a valid address for the window, adjust |
| 384 | * accordingly |
| 385 | */ |
| 386 | vme_bound = vme_base + size; |
| 387 | pci_offset = pci_base - vme_base; |
| 388 | |
| 389 | if ((i == 0) || (i == 4)) |
| 390 | granularity = 0x1000; |
| 391 | else |
| 392 | granularity = 0x10000; |
| 393 | |
| 394 | if (vme_base & (granularity - 1)) { |
| 395 | dev_err(ca91cx42_bridge->parent, "Invalid VME base " |
| 396 | "alignment\n"); |
| 397 | return -EINVAL; |
| 398 | } |
| 399 | if (vme_bound & (granularity - 1)) { |
| 400 | dev_err(ca91cx42_bridge->parent, "Invalid VME bound " |
| 401 | "alignment\n"); |
| 402 | return -EINVAL; |
| 403 | } |
| 404 | if (pci_offset & (granularity - 1)) { |
| 405 | dev_err(ca91cx42_bridge->parent, "Invalid PCI Offset " |
| 406 | "alignment\n"); |
| 407 | return -EINVAL; |
| 408 | } |
| 409 | |
| 410 | /* Disable while we are mucking around */ |
| 411 | temp_ctl = ioread32(bridge->base + CA91CX42_VSI_CTL[i]); |
| 412 | temp_ctl &= ~CA91CX42_VSI_CTL_EN; |
| 413 | iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]); |
| 414 | |
| 415 | /* Setup mapping */ |
| 416 | iowrite32(vme_base, bridge->base + CA91CX42_VSI_BS[i]); |
| 417 | iowrite32(vme_bound, bridge->base + CA91CX42_VSI_BD[i]); |
| 418 | iowrite32(pci_offset, bridge->base + CA91CX42_VSI_TO[i]); |
| 419 | |
| 420 | /* Setup address space */ |
| 421 | temp_ctl &= ~CA91CX42_VSI_CTL_VAS_M; |
| 422 | temp_ctl |= addr; |
| 423 | |
| 424 | /* Setup cycle types */ |
| 425 | temp_ctl &= ~(CA91CX42_VSI_CTL_PGM_M | CA91CX42_VSI_CTL_SUPER_M); |
| 426 | if (cycle & VME_SUPER) |
| 427 | temp_ctl |= CA91CX42_VSI_CTL_SUPER_SUPR; |
| 428 | if (cycle & VME_USER) |
| 429 | temp_ctl |= CA91CX42_VSI_CTL_SUPER_NPRIV; |
| 430 | if (cycle & VME_PROG) |
| 431 | temp_ctl |= CA91CX42_VSI_CTL_PGM_PGM; |
| 432 | if (cycle & VME_DATA) |
| 433 | temp_ctl |= CA91CX42_VSI_CTL_PGM_DATA; |
| 434 | |
| 435 | /* Write ctl reg without enable */ |
| 436 | iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]); |
| 437 | |
| 438 | if (enabled) |
| 439 | temp_ctl |= CA91CX42_VSI_CTL_EN; |
| 440 | |
| 441 | iowrite32(temp_ctl, bridge->base + CA91CX42_VSI_CTL[i]); |
| 442 | |
| 443 | return 0; |
| 444 | } |
| 445 | |
| 446 | static int ca91cx42_slave_get(struct vme_slave_resource *image, int *enabled, |
| 447 | unsigned long long *vme_base, unsigned long long *size, |
| 448 | dma_addr_t *pci_base, u32 *aspace, u32 *cycle) |
| 449 | { |
| 450 | unsigned int i, granularity = 0, ctl = 0; |
| 451 | unsigned long long vme_bound, pci_offset; |
| 452 | struct ca91cx42_driver *bridge; |
| 453 | |
| 454 | bridge = image->parent->driver_priv; |
| 455 | |
| 456 | i = image->number; |
| 457 | |
| 458 | if ((i == 0) || (i == 4)) |
| 459 | granularity = 0x1000; |
| 460 | else |
| 461 | granularity = 0x10000; |
| 462 | |
| 463 | /* Read Registers */ |
| 464 | ctl = ioread32(bridge->base + CA91CX42_VSI_CTL[i]); |
| 465 | |
| 466 | *vme_base = ioread32(bridge->base + CA91CX42_VSI_BS[i]); |
| 467 | vme_bound = ioread32(bridge->base + CA91CX42_VSI_BD[i]); |
| 468 | pci_offset = ioread32(bridge->base + CA91CX42_VSI_TO[i]); |
| 469 | |
| 470 | *pci_base = (dma_addr_t)*vme_base + pci_offset; |
| 471 | *size = (unsigned long long)((vme_bound - *vme_base) + granularity); |
| 472 | |
| 473 | *enabled = 0; |
| 474 | *aspace = 0; |
| 475 | *cycle = 0; |
| 476 | |
| 477 | if (ctl & CA91CX42_VSI_CTL_EN) |
| 478 | *enabled = 1; |
| 479 | |
| 480 | if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A16) |
| 481 | *aspace = VME_A16; |
| 482 | if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A24) |
| 483 | *aspace = VME_A24; |
| 484 | if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_A32) |
| 485 | *aspace = VME_A32; |
| 486 | if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_USER1) |
| 487 | *aspace = VME_USER1; |
| 488 | if ((ctl & CA91CX42_VSI_CTL_VAS_M) == CA91CX42_VSI_CTL_VAS_USER2) |
| 489 | *aspace = VME_USER2; |
| 490 | |
| 491 | if (ctl & CA91CX42_VSI_CTL_SUPER_SUPR) |
| 492 | *cycle |= VME_SUPER; |
| 493 | if (ctl & CA91CX42_VSI_CTL_SUPER_NPRIV) |
| 494 | *cycle |= VME_USER; |
| 495 | if (ctl & CA91CX42_VSI_CTL_PGM_PGM) |
| 496 | *cycle |= VME_PROG; |
| 497 | if (ctl & CA91CX42_VSI_CTL_PGM_DATA) |
| 498 | *cycle |= VME_DATA; |
| 499 | |
| 500 | return 0; |
| 501 | } |
| 502 | |
| 503 | /* |
| 504 | * Allocate and map PCI Resource |
| 505 | */ |
| 506 | static int ca91cx42_alloc_resource(struct vme_master_resource *image, |
| 507 | unsigned long long size) |
| 508 | { |
| 509 | unsigned long long existing_size; |
| 510 | int retval = 0; |
| 511 | struct pci_dev *pdev; |
| 512 | struct vme_bridge *ca91cx42_bridge; |
| 513 | |
| 514 | ca91cx42_bridge = image->parent; |
| 515 | |
| 516 | /* Find pci_dev container of dev */ |
| 517 | if (ca91cx42_bridge->parent == NULL) { |
| 518 | dev_err(ca91cx42_bridge->parent, "Dev entry NULL\n"); |
| 519 | return -EINVAL; |
| 520 | } |
| 521 | pdev = container_of(ca91cx42_bridge->parent, struct pci_dev, dev); |
| 522 | |
| 523 | existing_size = (unsigned long long)(image->bus_resource.end - |
| 524 | image->bus_resource.start); |
| 525 | |
| 526 | /* If the existing size is OK, return */ |
| 527 | if (existing_size == (size - 1)) |
| 528 | return 0; |
| 529 | |
| 530 | if (existing_size != 0) { |
| 531 | iounmap(image->kern_base); |
| 532 | image->kern_base = NULL; |
| 533 | kfree(image->bus_resource.name); |
| 534 | release_resource(&image->bus_resource); |
| 535 | memset(&image->bus_resource, 0, sizeof(struct resource)); |
| 536 | } |
| 537 | |
| 538 | if (image->bus_resource.name == NULL) { |
| 539 | image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC); |
| 540 | if (image->bus_resource.name == NULL) { |
| 541 | dev_err(ca91cx42_bridge->parent, "Unable to allocate " |
| 542 | "memory for resource name\n"); |
| 543 | retval = -ENOMEM; |
| 544 | goto err_name; |
| 545 | } |
| 546 | } |
| 547 | |
| 548 | sprintf((char *)image->bus_resource.name, "%s.%d", |
| 549 | ca91cx42_bridge->name, image->number); |
| 550 | |
| 551 | image->bus_resource.start = 0; |
| 552 | image->bus_resource.end = (unsigned long)size; |
| 553 | image->bus_resource.flags = IORESOURCE_MEM; |
| 554 | |
| 555 | retval = pci_bus_alloc_resource(pdev->bus, |
| 556 | &image->bus_resource, size, 0x10000, PCIBIOS_MIN_MEM, |
| 557 | 0, NULL, NULL); |
| 558 | if (retval) { |
| 559 | dev_err(ca91cx42_bridge->parent, "Failed to allocate mem " |
| 560 | "resource for window %d size 0x%lx start 0x%lx\n", |
| 561 | image->number, (unsigned long)size, |
| 562 | (unsigned long)image->bus_resource.start); |
| 563 | goto err_resource; |
| 564 | } |
| 565 | |
| 566 | image->kern_base = ioremap_nocache( |
| 567 | image->bus_resource.start, size); |
| 568 | if (image->kern_base == NULL) { |
| 569 | dev_err(ca91cx42_bridge->parent, "Failed to remap resource\n"); |
| 570 | retval = -ENOMEM; |
| 571 | goto err_remap; |
| 572 | } |
| 573 | |
| 574 | return 0; |
| 575 | |
| 576 | err_remap: |
| 577 | release_resource(&image->bus_resource); |
| 578 | err_resource: |
| 579 | kfree(image->bus_resource.name); |
| 580 | memset(&image->bus_resource, 0, sizeof(struct resource)); |
| 581 | err_name: |
| 582 | return retval; |
| 583 | } |
| 584 | |
| 585 | /* |
| 586 | * Free and unmap PCI Resource |
| 587 | */ |
| 588 | static void ca91cx42_free_resource(struct vme_master_resource *image) |
| 589 | { |
| 590 | iounmap(image->kern_base); |
| 591 | image->kern_base = NULL; |
| 592 | release_resource(&image->bus_resource); |
| 593 | kfree(image->bus_resource.name); |
| 594 | memset(&image->bus_resource, 0, sizeof(struct resource)); |
| 595 | } |
| 596 | |
| 597 | |
| 598 | static int ca91cx42_master_set(struct vme_master_resource *image, int enabled, |
| 599 | unsigned long long vme_base, unsigned long long size, u32 aspace, |
| 600 | u32 cycle, u32 dwidth) |
| 601 | { |
| 602 | int retval = 0; |
| 603 | unsigned int i, granularity = 0; |
| 604 | unsigned int temp_ctl = 0; |
| 605 | unsigned long long pci_bound, vme_offset, pci_base; |
| 606 | struct vme_bridge *ca91cx42_bridge; |
| 607 | struct ca91cx42_driver *bridge; |
| 608 | |
| 609 | ca91cx42_bridge = image->parent; |
| 610 | |
| 611 | bridge = ca91cx42_bridge->driver_priv; |
| 612 | |
| 613 | i = image->number; |
| 614 | |
| 615 | if ((i == 0) || (i == 4)) |
| 616 | granularity = 0x1000; |
| 617 | else |
| 618 | granularity = 0x10000; |
| 619 | |
| 620 | /* Verify input data */ |
| 621 | if (vme_base & (granularity - 1)) { |
| 622 | dev_err(ca91cx42_bridge->parent, "Invalid VME Window " |
| 623 | "alignment\n"); |
| 624 | retval = -EINVAL; |
| 625 | goto err_window; |
| 626 | } |
| 627 | if (size & (granularity - 1)) { |
| 628 | dev_err(ca91cx42_bridge->parent, "Invalid VME Window " |
| 629 | "alignment\n"); |
| 630 | retval = -EINVAL; |
| 631 | goto err_window; |
| 632 | } |
| 633 | |
| 634 | spin_lock(&image->lock); |
| 635 | |
| 636 | /* |
| 637 | * Let's allocate the resource here rather than further up the stack as |
| 638 | * it avoids pushing loads of bus dependent stuff up the stack |
| 639 | */ |
| 640 | retval = ca91cx42_alloc_resource(image, size); |
| 641 | if (retval) { |
| 642 | spin_unlock(&image->lock); |
| 643 | dev_err(ca91cx42_bridge->parent, "Unable to allocate memory " |
| 644 | "for resource name\n"); |
| 645 | retval = -ENOMEM; |
| 646 | goto err_res; |
| 647 | } |
| 648 | |
| 649 | pci_base = (unsigned long long)image->bus_resource.start; |
| 650 | |
| 651 | /* |
| 652 | * Bound address is a valid address for the window, adjust |
| 653 | * according to window granularity. |
| 654 | */ |
| 655 | pci_bound = pci_base + size; |
| 656 | vme_offset = vme_base - pci_base; |
| 657 | |
| 658 | /* Disable while we are mucking around */ |
| 659 | temp_ctl = ioread32(bridge->base + CA91CX42_LSI_CTL[i]); |
| 660 | temp_ctl &= ~CA91CX42_LSI_CTL_EN; |
| 661 | iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]); |
| 662 | |
| 663 | /* Setup cycle types */ |
| 664 | temp_ctl &= ~CA91CX42_LSI_CTL_VCT_M; |
| 665 | if (cycle & VME_BLT) |
| 666 | temp_ctl |= CA91CX42_LSI_CTL_VCT_BLT; |
| 667 | if (cycle & VME_MBLT) |
| 668 | temp_ctl |= CA91CX42_LSI_CTL_VCT_MBLT; |
| 669 | |
| 670 | /* Setup data width */ |
| 671 | temp_ctl &= ~CA91CX42_LSI_CTL_VDW_M; |
| 672 | switch (dwidth) { |
| 673 | case VME_D8: |
| 674 | temp_ctl |= CA91CX42_LSI_CTL_VDW_D8; |
| 675 | break; |
| 676 | case VME_D16: |
| 677 | temp_ctl |= CA91CX42_LSI_CTL_VDW_D16; |
| 678 | break; |
| 679 | case VME_D32: |
| 680 | temp_ctl |= CA91CX42_LSI_CTL_VDW_D32; |
| 681 | break; |
| 682 | case VME_D64: |
| 683 | temp_ctl |= CA91CX42_LSI_CTL_VDW_D64; |
| 684 | break; |
| 685 | default: |
| 686 | spin_unlock(&image->lock); |
| 687 | dev_err(ca91cx42_bridge->parent, "Invalid data width\n"); |
| 688 | retval = -EINVAL; |
| 689 | goto err_dwidth; |
| 690 | break; |
| 691 | } |
| 692 | |
| 693 | /* Setup address space */ |
| 694 | temp_ctl &= ~CA91CX42_LSI_CTL_VAS_M; |
| 695 | switch (aspace) { |
| 696 | case VME_A16: |
| 697 | temp_ctl |= CA91CX42_LSI_CTL_VAS_A16; |
| 698 | break; |
| 699 | case VME_A24: |
| 700 | temp_ctl |= CA91CX42_LSI_CTL_VAS_A24; |
| 701 | break; |
| 702 | case VME_A32: |
| 703 | temp_ctl |= CA91CX42_LSI_CTL_VAS_A32; |
| 704 | break; |
| 705 | case VME_CRCSR: |
| 706 | temp_ctl |= CA91CX42_LSI_CTL_VAS_CRCSR; |
| 707 | break; |
| 708 | case VME_USER1: |
| 709 | temp_ctl |= CA91CX42_LSI_CTL_VAS_USER1; |
| 710 | break; |
| 711 | case VME_USER2: |
| 712 | temp_ctl |= CA91CX42_LSI_CTL_VAS_USER2; |
| 713 | break; |
| 714 | case VME_A64: |
| 715 | case VME_USER3: |
| 716 | case VME_USER4: |
| 717 | default: |
| 718 | spin_unlock(&image->lock); |
| 719 | dev_err(ca91cx42_bridge->parent, "Invalid address space\n"); |
| 720 | retval = -EINVAL; |
| 721 | goto err_aspace; |
| 722 | break; |
| 723 | } |
| 724 | |
| 725 | temp_ctl &= ~(CA91CX42_LSI_CTL_PGM_M | CA91CX42_LSI_CTL_SUPER_M); |
| 726 | if (cycle & VME_SUPER) |
| 727 | temp_ctl |= CA91CX42_LSI_CTL_SUPER_SUPR; |
| 728 | if (cycle & VME_PROG) |
| 729 | temp_ctl |= CA91CX42_LSI_CTL_PGM_PGM; |
| 730 | |
| 731 | /* Setup mapping */ |
| 732 | iowrite32(pci_base, bridge->base + CA91CX42_LSI_BS[i]); |
| 733 | iowrite32(pci_bound, bridge->base + CA91CX42_LSI_BD[i]); |
| 734 | iowrite32(vme_offset, bridge->base + CA91CX42_LSI_TO[i]); |
| 735 | |
| 736 | /* Write ctl reg without enable */ |
| 737 | iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]); |
| 738 | |
| 739 | if (enabled) |
| 740 | temp_ctl |= CA91CX42_LSI_CTL_EN; |
| 741 | |
| 742 | iowrite32(temp_ctl, bridge->base + CA91CX42_LSI_CTL[i]); |
| 743 | |
| 744 | spin_unlock(&image->lock); |
| 745 | return 0; |
| 746 | |
| 747 | err_aspace: |
| 748 | err_dwidth: |
| 749 | ca91cx42_free_resource(image); |
| 750 | err_res: |
| 751 | err_window: |
| 752 | return retval; |
| 753 | } |
| 754 | |
| 755 | static int __ca91cx42_master_get(struct vme_master_resource *image, |
| 756 | int *enabled, unsigned long long *vme_base, unsigned long long *size, |
| 757 | u32 *aspace, u32 *cycle, u32 *dwidth) |
| 758 | { |
| 759 | unsigned int i, ctl; |
| 760 | unsigned long long pci_base, pci_bound, vme_offset; |
| 761 | struct ca91cx42_driver *bridge; |
| 762 | |
| 763 | bridge = image->parent->driver_priv; |
| 764 | |
| 765 | i = image->number; |
| 766 | |
| 767 | ctl = ioread32(bridge->base + CA91CX42_LSI_CTL[i]); |
| 768 | |
| 769 | pci_base = ioread32(bridge->base + CA91CX42_LSI_BS[i]); |
| 770 | vme_offset = ioread32(bridge->base + CA91CX42_LSI_TO[i]); |
| 771 | pci_bound = ioread32(bridge->base + CA91CX42_LSI_BD[i]); |
| 772 | |
| 773 | *vme_base = pci_base + vme_offset; |
| 774 | *size = (unsigned long long)(pci_bound - pci_base); |
| 775 | |
| 776 | *enabled = 0; |
| 777 | *aspace = 0; |
| 778 | *cycle = 0; |
| 779 | *dwidth = 0; |
| 780 | |
| 781 | if (ctl & CA91CX42_LSI_CTL_EN) |
| 782 | *enabled = 1; |
| 783 | |
| 784 | /* Setup address space */ |
| 785 | switch (ctl & CA91CX42_LSI_CTL_VAS_M) { |
| 786 | case CA91CX42_LSI_CTL_VAS_A16: |
| 787 | *aspace = VME_A16; |
| 788 | break; |
| 789 | case CA91CX42_LSI_CTL_VAS_A24: |
| 790 | *aspace = VME_A24; |
| 791 | break; |
| 792 | case CA91CX42_LSI_CTL_VAS_A32: |
| 793 | *aspace = VME_A32; |
| 794 | break; |
| 795 | case CA91CX42_LSI_CTL_VAS_CRCSR: |
| 796 | *aspace = VME_CRCSR; |
| 797 | break; |
| 798 | case CA91CX42_LSI_CTL_VAS_USER1: |
| 799 | *aspace = VME_USER1; |
| 800 | break; |
| 801 | case CA91CX42_LSI_CTL_VAS_USER2: |
| 802 | *aspace = VME_USER2; |
| 803 | break; |
| 804 | } |
| 805 | |
| 806 | /* XXX Not sure howto check for MBLT */ |
| 807 | /* Setup cycle types */ |
| 808 | if (ctl & CA91CX42_LSI_CTL_VCT_BLT) |
| 809 | *cycle |= VME_BLT; |
| 810 | else |
| 811 | *cycle |= VME_SCT; |
| 812 | |
| 813 | if (ctl & CA91CX42_LSI_CTL_SUPER_SUPR) |
| 814 | *cycle |= VME_SUPER; |
| 815 | else |
| 816 | *cycle |= VME_USER; |
| 817 | |
| 818 | if (ctl & CA91CX42_LSI_CTL_PGM_PGM) |
| 819 | *cycle = VME_PROG; |
| 820 | else |
| 821 | *cycle = VME_DATA; |
| 822 | |
| 823 | /* Setup data width */ |
| 824 | switch (ctl & CA91CX42_LSI_CTL_VDW_M) { |
| 825 | case CA91CX42_LSI_CTL_VDW_D8: |
| 826 | *dwidth = VME_D8; |
| 827 | break; |
| 828 | case CA91CX42_LSI_CTL_VDW_D16: |
| 829 | *dwidth = VME_D16; |
| 830 | break; |
| 831 | case CA91CX42_LSI_CTL_VDW_D32: |
| 832 | *dwidth = VME_D32; |
| 833 | break; |
| 834 | case CA91CX42_LSI_CTL_VDW_D64: |
| 835 | *dwidth = VME_D64; |
| 836 | break; |
| 837 | } |
| 838 | |
| 839 | return 0; |
| 840 | } |
| 841 | |
| 842 | static int ca91cx42_master_get(struct vme_master_resource *image, int *enabled, |
| 843 | unsigned long long *vme_base, unsigned long long *size, u32 *aspace, |
| 844 | u32 *cycle, u32 *dwidth) |
| 845 | { |
| 846 | int retval; |
| 847 | |
| 848 | spin_lock(&image->lock); |
| 849 | |
| 850 | retval = __ca91cx42_master_get(image, enabled, vme_base, size, aspace, |
| 851 | cycle, dwidth); |
| 852 | |
| 853 | spin_unlock(&image->lock); |
| 854 | |
| 855 | return retval; |
| 856 | } |
| 857 | |
| 858 | static ssize_t ca91cx42_master_read(struct vme_master_resource *image, |
| 859 | void *buf, size_t count, loff_t offset) |
| 860 | { |
| 861 | ssize_t retval; |
| 862 | void __iomem *addr = image->kern_base + offset; |
| 863 | unsigned int done = 0; |
| 864 | unsigned int count32; |
| 865 | |
| 866 | if (count == 0) |
| 867 | return 0; |
| 868 | |
| 869 | spin_lock(&image->lock); |
| 870 | |
| 871 | /* The following code handles VME address alignment. We cannot use |
| 872 | * memcpy_xxx here because it may cut data transfers in to 8-bit |
| 873 | * cycles when D16 or D32 cycles are required on the VME bus. |
| 874 | * On the other hand, the bridge itself assures that the maximum data |
| 875 | * cycle configured for the transfer is used and splits it |
| 876 | * automatically for non-aligned addresses, so we don't want the |
| 877 | * overhead of needlessly forcing small transfers for the entire cycle. |
| 878 | */ |
| 879 | if ((uintptr_t)addr & 0x1) { |
| 880 | *(u8 *)buf = ioread8(addr); |
| 881 | done += 1; |
| 882 | if (done == count) |
| 883 | goto out; |
| 884 | } |
| 885 | if ((uintptr_t)(addr + done) & 0x2) { |
| 886 | if ((count - done) < 2) { |
| 887 | *(u8 *)(buf + done) = ioread8(addr + done); |
| 888 | done += 1; |
| 889 | goto out; |
| 890 | } else { |
| 891 | *(u16 *)(buf + done) = ioread16(addr + done); |
| 892 | done += 2; |
| 893 | } |
| 894 | } |
| 895 | |
| 896 | count32 = (count - done) & ~0x3; |
| 897 | while (done < count32) { |
| 898 | *(u32 *)(buf + done) = ioread32(addr + done); |
| 899 | done += 4; |
| 900 | } |
| 901 | |
| 902 | if ((count - done) & 0x2) { |
| 903 | *(u16 *)(buf + done) = ioread16(addr + done); |
| 904 | done += 2; |
| 905 | } |
| 906 | if ((count - done) & 0x1) { |
| 907 | *(u8 *)(buf + done) = ioread8(addr + done); |
| 908 | done += 1; |
| 909 | } |
| 910 | out: |
| 911 | retval = count; |
| 912 | spin_unlock(&image->lock); |
| 913 | |
| 914 | return retval; |
| 915 | } |
| 916 | |
| 917 | static ssize_t ca91cx42_master_write(struct vme_master_resource *image, |
| 918 | void *buf, size_t count, loff_t offset) |
| 919 | { |
| 920 | ssize_t retval; |
| 921 | void __iomem *addr = image->kern_base + offset; |
| 922 | unsigned int done = 0; |
| 923 | unsigned int count32; |
| 924 | |
| 925 | if (count == 0) |
| 926 | return 0; |
| 927 | |
| 928 | spin_lock(&image->lock); |
| 929 | |
| 930 | /* Here we apply for the same strategy we do in master_read |
| 931 | * function in order to assure the correct cycles. |
| 932 | */ |
| 933 | if ((uintptr_t)addr & 0x1) { |
| 934 | iowrite8(*(u8 *)buf, addr); |
| 935 | done += 1; |
| 936 | if (done == count) |
| 937 | goto out; |
| 938 | } |
| 939 | if ((uintptr_t)(addr + done) & 0x2) { |
| 940 | if ((count - done) < 2) { |
| 941 | iowrite8(*(u8 *)(buf + done), addr + done); |
| 942 | done += 1; |
| 943 | goto out; |
| 944 | } else { |
| 945 | iowrite16(*(u16 *)(buf + done), addr + done); |
| 946 | done += 2; |
| 947 | } |
| 948 | } |
| 949 | |
| 950 | count32 = (count - done) & ~0x3; |
| 951 | while (done < count32) { |
| 952 | iowrite32(*(u32 *)(buf + done), addr + done); |
| 953 | done += 4; |
| 954 | } |
| 955 | |
| 956 | if ((count - done) & 0x2) { |
| 957 | iowrite16(*(u16 *)(buf + done), addr + done); |
| 958 | done += 2; |
| 959 | } |
| 960 | if ((count - done) & 0x1) { |
| 961 | iowrite8(*(u8 *)(buf + done), addr + done); |
| 962 | done += 1; |
| 963 | } |
| 964 | out: |
| 965 | retval = count; |
| 966 | |
| 967 | spin_unlock(&image->lock); |
| 968 | |
| 969 | return retval; |
| 970 | } |
| 971 | |
| 972 | static unsigned int ca91cx42_master_rmw(struct vme_master_resource *image, |
| 973 | unsigned int mask, unsigned int compare, unsigned int swap, |
| 974 | loff_t offset) |
| 975 | { |
| 976 | u32 result; |
| 977 | uintptr_t pci_addr; |
| 978 | int i; |
| 979 | struct ca91cx42_driver *bridge; |
| 980 | struct device *dev; |
| 981 | |
| 982 | bridge = image->parent->driver_priv; |
| 983 | dev = image->parent->parent; |
| 984 | |
| 985 | /* Find the PCI address that maps to the desired VME address */ |
| 986 | i = image->number; |
| 987 | |
| 988 | /* Locking as we can only do one of these at a time */ |
| 989 | mutex_lock(&bridge->vme_rmw); |
| 990 | |
| 991 | /* Lock image */ |
| 992 | spin_lock(&image->lock); |
| 993 | |
| 994 | pci_addr = (uintptr_t)image->kern_base + offset; |
| 995 | |
| 996 | /* Address must be 4-byte aligned */ |
| 997 | if (pci_addr & 0x3) { |
| 998 | dev_err(dev, "RMW Address not 4-byte aligned\n"); |
| 999 | result = -EINVAL; |
| 1000 | goto out; |
| 1001 | } |
| 1002 | |
| 1003 | /* Ensure RMW Disabled whilst configuring */ |
| 1004 | iowrite32(0, bridge->base + SCYC_CTL); |
| 1005 | |
| 1006 | /* Configure registers */ |
| 1007 | iowrite32(mask, bridge->base + SCYC_EN); |
| 1008 | iowrite32(compare, bridge->base + SCYC_CMP); |
| 1009 | iowrite32(swap, bridge->base + SCYC_SWP); |
| 1010 | iowrite32(pci_addr, bridge->base + SCYC_ADDR); |
| 1011 | |
| 1012 | /* Enable RMW */ |
| 1013 | iowrite32(CA91CX42_SCYC_CTL_CYC_RMW, bridge->base + SCYC_CTL); |
| 1014 | |
| 1015 | /* Kick process off with a read to the required address. */ |
| 1016 | result = ioread32(image->kern_base + offset); |
| 1017 | |
| 1018 | /* Disable RMW */ |
| 1019 | iowrite32(0, bridge->base + SCYC_CTL); |
| 1020 | |
| 1021 | out: |
| 1022 | spin_unlock(&image->lock); |
| 1023 | |
| 1024 | mutex_unlock(&bridge->vme_rmw); |
| 1025 | |
| 1026 | return result; |
| 1027 | } |
| 1028 | |
| 1029 | static int ca91cx42_dma_list_add(struct vme_dma_list *list, |
| 1030 | struct vme_dma_attr *src, struct vme_dma_attr *dest, size_t count) |
| 1031 | { |
| 1032 | struct ca91cx42_dma_entry *entry, *prev; |
| 1033 | struct vme_dma_pci *pci_attr; |
| 1034 | struct vme_dma_vme *vme_attr; |
| 1035 | dma_addr_t desc_ptr; |
| 1036 | int retval = 0; |
| 1037 | struct device *dev; |
| 1038 | |
| 1039 | dev = list->parent->parent->parent; |
| 1040 | |
| 1041 | /* XXX descriptor must be aligned on 64-bit boundaries */ |
| 1042 | entry = kmalloc(sizeof(struct ca91cx42_dma_entry), GFP_KERNEL); |
| 1043 | if (entry == NULL) { |
| 1044 | dev_err(dev, "Failed to allocate memory for dma resource " |
| 1045 | "structure\n"); |
| 1046 | retval = -ENOMEM; |
| 1047 | goto err_mem; |
| 1048 | } |
| 1049 | |
| 1050 | /* Test descriptor alignment */ |
| 1051 | if ((unsigned long)&entry->descriptor & CA91CX42_DCPP_M) { |
| 1052 | dev_err(dev, "Descriptor not aligned to 16 byte boundary as " |
| 1053 | "required: %p\n", &entry->descriptor); |
| 1054 | retval = -EINVAL; |
| 1055 | goto err_align; |
| 1056 | } |
| 1057 | |
| 1058 | memset(&entry->descriptor, 0, sizeof(struct ca91cx42_dma_descriptor)); |
| 1059 | |
| 1060 | if (dest->type == VME_DMA_VME) { |
| 1061 | entry->descriptor.dctl |= CA91CX42_DCTL_L2V; |
| 1062 | vme_attr = dest->private; |
| 1063 | pci_attr = src->private; |
| 1064 | } else { |
| 1065 | vme_attr = src->private; |
| 1066 | pci_attr = dest->private; |
| 1067 | } |
| 1068 | |
| 1069 | /* Check we can do fulfill required attributes */ |
| 1070 | if ((vme_attr->aspace & ~(VME_A16 | VME_A24 | VME_A32 | VME_USER1 | |
| 1071 | VME_USER2)) != 0) { |
| 1072 | |
| 1073 | dev_err(dev, "Unsupported cycle type\n"); |
| 1074 | retval = -EINVAL; |
| 1075 | goto err_aspace; |
| 1076 | } |
| 1077 | |
| 1078 | if ((vme_attr->cycle & ~(VME_SCT | VME_BLT | VME_SUPER | VME_USER | |
| 1079 | VME_PROG | VME_DATA)) != 0) { |
| 1080 | |
| 1081 | dev_err(dev, "Unsupported cycle type\n"); |
| 1082 | retval = -EINVAL; |
| 1083 | goto err_cycle; |
| 1084 | } |
| 1085 | |
| 1086 | /* Check to see if we can fulfill source and destination */ |
| 1087 | if (!(((src->type == VME_DMA_PCI) && (dest->type == VME_DMA_VME)) || |
| 1088 | ((src->type == VME_DMA_VME) && (dest->type == VME_DMA_PCI)))) { |
| 1089 | |
| 1090 | dev_err(dev, "Cannot perform transfer with this " |
| 1091 | "source-destination combination\n"); |
| 1092 | retval = -EINVAL; |
| 1093 | goto err_direct; |
| 1094 | } |
| 1095 | |
| 1096 | /* Setup cycle types */ |
| 1097 | if (vme_attr->cycle & VME_BLT) |
| 1098 | entry->descriptor.dctl |= CA91CX42_DCTL_VCT_BLT; |
| 1099 | |
| 1100 | /* Setup data width */ |
| 1101 | switch (vme_attr->dwidth) { |
| 1102 | case VME_D8: |
| 1103 | entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D8; |
| 1104 | break; |
| 1105 | case VME_D16: |
| 1106 | entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D16; |
| 1107 | break; |
| 1108 | case VME_D32: |
| 1109 | entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D32; |
| 1110 | break; |
| 1111 | case VME_D64: |
| 1112 | entry->descriptor.dctl |= CA91CX42_DCTL_VDW_D64; |
| 1113 | break; |
| 1114 | default: |
| 1115 | dev_err(dev, "Invalid data width\n"); |
| 1116 | return -EINVAL; |
| 1117 | } |
| 1118 | |
| 1119 | /* Setup address space */ |
| 1120 | switch (vme_attr->aspace) { |
| 1121 | case VME_A16: |
| 1122 | entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A16; |
| 1123 | break; |
| 1124 | case VME_A24: |
| 1125 | entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A24; |
| 1126 | break; |
| 1127 | case VME_A32: |
| 1128 | entry->descriptor.dctl |= CA91CX42_DCTL_VAS_A32; |
| 1129 | break; |
| 1130 | case VME_USER1: |
| 1131 | entry->descriptor.dctl |= CA91CX42_DCTL_VAS_USER1; |
| 1132 | break; |
| 1133 | case VME_USER2: |
| 1134 | entry->descriptor.dctl |= CA91CX42_DCTL_VAS_USER2; |
| 1135 | break; |
| 1136 | default: |
| 1137 | dev_err(dev, "Invalid address space\n"); |
| 1138 | return -EINVAL; |
| 1139 | break; |
| 1140 | } |
| 1141 | |
| 1142 | if (vme_attr->cycle & VME_SUPER) |
| 1143 | entry->descriptor.dctl |= CA91CX42_DCTL_SUPER_SUPR; |
| 1144 | if (vme_attr->cycle & VME_PROG) |
| 1145 | entry->descriptor.dctl |= CA91CX42_DCTL_PGM_PGM; |
| 1146 | |
| 1147 | entry->descriptor.dtbc = count; |
| 1148 | entry->descriptor.dla = pci_attr->address; |
| 1149 | entry->descriptor.dva = vme_attr->address; |
| 1150 | entry->descriptor.dcpp = CA91CX42_DCPP_NULL; |
| 1151 | |
| 1152 | /* Add to list */ |
| 1153 | list_add_tail(&entry->list, &list->entries); |
| 1154 | |
| 1155 | /* Fill out previous descriptors "Next Address" */ |
| 1156 | if (entry->list.prev != &list->entries) { |
| 1157 | prev = list_entry(entry->list.prev, struct ca91cx42_dma_entry, |
| 1158 | list); |
| 1159 | /* We need the bus address for the pointer */ |
| 1160 | desc_ptr = virt_to_bus(&entry->descriptor); |
| 1161 | prev->descriptor.dcpp = desc_ptr & ~CA91CX42_DCPP_M; |
| 1162 | } |
| 1163 | |
| 1164 | return 0; |
| 1165 | |
| 1166 | err_cycle: |
| 1167 | err_aspace: |
| 1168 | err_direct: |
| 1169 | err_align: |
| 1170 | kfree(entry); |
| 1171 | err_mem: |
| 1172 | return retval; |
| 1173 | } |
| 1174 | |
| 1175 | static int ca91cx42_dma_busy(struct vme_bridge *ca91cx42_bridge) |
| 1176 | { |
| 1177 | u32 tmp; |
| 1178 | struct ca91cx42_driver *bridge; |
| 1179 | |
| 1180 | bridge = ca91cx42_bridge->driver_priv; |
| 1181 | |
| 1182 | tmp = ioread32(bridge->base + DGCS); |
| 1183 | |
| 1184 | if (tmp & CA91CX42_DGCS_ACT) |
| 1185 | return 0; |
| 1186 | else |
| 1187 | return 1; |
| 1188 | } |
| 1189 | |
| 1190 | static int ca91cx42_dma_list_exec(struct vme_dma_list *list) |
| 1191 | { |
| 1192 | struct vme_dma_resource *ctrlr; |
| 1193 | struct ca91cx42_dma_entry *entry; |
| 1194 | int retval; |
| 1195 | dma_addr_t bus_addr; |
| 1196 | u32 val; |
| 1197 | struct device *dev; |
| 1198 | struct ca91cx42_driver *bridge; |
| 1199 | |
| 1200 | ctrlr = list->parent; |
| 1201 | |
| 1202 | bridge = ctrlr->parent->driver_priv; |
| 1203 | dev = ctrlr->parent->parent; |
| 1204 | |
| 1205 | mutex_lock(&ctrlr->mtx); |
| 1206 | |
| 1207 | if (!(list_empty(&ctrlr->running))) { |
| 1208 | /* |
| 1209 | * XXX We have an active DMA transfer and currently haven't |
| 1210 | * sorted out the mechanism for "pending" DMA transfers. |
| 1211 | * Return busy. |
| 1212 | */ |
| 1213 | /* Need to add to pending here */ |
| 1214 | mutex_unlock(&ctrlr->mtx); |
| 1215 | return -EBUSY; |
| 1216 | } else { |
| 1217 | list_add(&list->list, &ctrlr->running); |
| 1218 | } |
| 1219 | |
| 1220 | /* Get first bus address and write into registers */ |
| 1221 | entry = list_first_entry(&list->entries, struct ca91cx42_dma_entry, |
| 1222 | list); |
| 1223 | |
| 1224 | bus_addr = virt_to_bus(&entry->descriptor); |
| 1225 | |
| 1226 | mutex_unlock(&ctrlr->mtx); |
| 1227 | |
| 1228 | iowrite32(0, bridge->base + DTBC); |
| 1229 | iowrite32(bus_addr & ~CA91CX42_DCPP_M, bridge->base + DCPP); |
| 1230 | |
| 1231 | /* Start the operation */ |
| 1232 | val = ioread32(bridge->base + DGCS); |
| 1233 | |
| 1234 | /* XXX Could set VMEbus On and Off Counters here */ |
| 1235 | val &= (CA91CX42_DGCS_VON_M | CA91CX42_DGCS_VOFF_M); |
| 1236 | |
| 1237 | val |= (CA91CX42_DGCS_CHAIN | CA91CX42_DGCS_STOP | CA91CX42_DGCS_HALT | |
| 1238 | CA91CX42_DGCS_DONE | CA91CX42_DGCS_LERR | CA91CX42_DGCS_VERR | |
| 1239 | CA91CX42_DGCS_PERR); |
| 1240 | |
| 1241 | iowrite32(val, bridge->base + DGCS); |
| 1242 | |
| 1243 | val |= CA91CX42_DGCS_GO; |
| 1244 | |
| 1245 | iowrite32(val, bridge->base + DGCS); |
| 1246 | |
| 1247 | retval = wait_event_interruptible(bridge->dma_queue, |
| 1248 | ca91cx42_dma_busy(ctrlr->parent)); |
| 1249 | |
| 1250 | if (retval) { |
| 1251 | val = ioread32(bridge->base + DGCS); |
| 1252 | iowrite32(val | CA91CX42_DGCS_STOP_REQ, bridge->base + DGCS); |
| 1253 | /* Wait for the operation to abort */ |
| 1254 | wait_event(bridge->dma_queue, |
| 1255 | ca91cx42_dma_busy(ctrlr->parent)); |
| 1256 | retval = -EINTR; |
| 1257 | goto exit; |
| 1258 | } |
| 1259 | |
| 1260 | /* |
| 1261 | * Read status register, this register is valid until we kick off a |
| 1262 | * new transfer. |
| 1263 | */ |
| 1264 | val = ioread32(bridge->base + DGCS); |
| 1265 | |
| 1266 | if (val & (CA91CX42_DGCS_LERR | CA91CX42_DGCS_VERR | |
| 1267 | CA91CX42_DGCS_PERR)) { |
| 1268 | |
| 1269 | dev_err(dev, "ca91c042: DMA Error. DGCS=%08X\n", val); |
| 1270 | val = ioread32(bridge->base + DCTL); |
| 1271 | retval = -EIO; |
| 1272 | } |
| 1273 | |
| 1274 | exit: |
| 1275 | /* Remove list from running list */ |
| 1276 | mutex_lock(&ctrlr->mtx); |
| 1277 | list_del(&list->list); |
| 1278 | mutex_unlock(&ctrlr->mtx); |
| 1279 | |
| 1280 | return retval; |
| 1281 | |
| 1282 | } |
| 1283 | |
| 1284 | static int ca91cx42_dma_list_empty(struct vme_dma_list *list) |
| 1285 | { |
| 1286 | struct list_head *pos, *temp; |
| 1287 | struct ca91cx42_dma_entry *entry; |
| 1288 | |
| 1289 | /* detach and free each entry */ |
| 1290 | list_for_each_safe(pos, temp, &list->entries) { |
| 1291 | list_del(pos); |
| 1292 | entry = list_entry(pos, struct ca91cx42_dma_entry, list); |
| 1293 | kfree(entry); |
| 1294 | } |
| 1295 | |
| 1296 | return 0; |
| 1297 | } |
| 1298 | |
| 1299 | /* |
| 1300 | * All 4 location monitors reside at the same base - this is therefore a |
| 1301 | * system wide configuration. |
| 1302 | * |
| 1303 | * This does not enable the LM monitor - that should be done when the first |
| 1304 | * callback is attached and disabled when the last callback is removed. |
| 1305 | */ |
| 1306 | static int ca91cx42_lm_set(struct vme_lm_resource *lm, |
| 1307 | unsigned long long lm_base, u32 aspace, u32 cycle) |
| 1308 | { |
| 1309 | u32 temp_base, lm_ctl = 0; |
| 1310 | int i; |
| 1311 | struct ca91cx42_driver *bridge; |
| 1312 | struct device *dev; |
| 1313 | |
| 1314 | bridge = lm->parent->driver_priv; |
| 1315 | dev = lm->parent->parent; |
| 1316 | |
| 1317 | /* Check the alignment of the location monitor */ |
| 1318 | temp_base = (u32)lm_base; |
| 1319 | if (temp_base & 0xffff) { |
| 1320 | dev_err(dev, "Location monitor must be aligned to 64KB " |
| 1321 | "boundary"); |
| 1322 | return -EINVAL; |
| 1323 | } |
| 1324 | |
| 1325 | mutex_lock(&lm->mtx); |
| 1326 | |
| 1327 | /* If we already have a callback attached, we can't move it! */ |
| 1328 | for (i = 0; i < lm->monitors; i++) { |
| 1329 | if (bridge->lm_callback[i] != NULL) { |
| 1330 | mutex_unlock(&lm->mtx); |
| 1331 | dev_err(dev, "Location monitor callback attached, " |
| 1332 | "can't reset\n"); |
| 1333 | return -EBUSY; |
| 1334 | } |
| 1335 | } |
| 1336 | |
| 1337 | switch (aspace) { |
| 1338 | case VME_A16: |
| 1339 | lm_ctl |= CA91CX42_LM_CTL_AS_A16; |
| 1340 | break; |
| 1341 | case VME_A24: |
| 1342 | lm_ctl |= CA91CX42_LM_CTL_AS_A24; |
| 1343 | break; |
| 1344 | case VME_A32: |
| 1345 | lm_ctl |= CA91CX42_LM_CTL_AS_A32; |
| 1346 | break; |
| 1347 | default: |
| 1348 | mutex_unlock(&lm->mtx); |
| 1349 | dev_err(dev, "Invalid address space\n"); |
| 1350 | return -EINVAL; |
| 1351 | break; |
| 1352 | } |
| 1353 | |
| 1354 | if (cycle & VME_SUPER) |
| 1355 | lm_ctl |= CA91CX42_LM_CTL_SUPR; |
| 1356 | if (cycle & VME_USER) |
| 1357 | lm_ctl |= CA91CX42_LM_CTL_NPRIV; |
| 1358 | if (cycle & VME_PROG) |
| 1359 | lm_ctl |= CA91CX42_LM_CTL_PGM; |
| 1360 | if (cycle & VME_DATA) |
| 1361 | lm_ctl |= CA91CX42_LM_CTL_DATA; |
| 1362 | |
| 1363 | iowrite32(lm_base, bridge->base + LM_BS); |
| 1364 | iowrite32(lm_ctl, bridge->base + LM_CTL); |
| 1365 | |
| 1366 | mutex_unlock(&lm->mtx); |
| 1367 | |
| 1368 | return 0; |
| 1369 | } |
| 1370 | |
| 1371 | /* Get configuration of the callback monitor and return whether it is enabled |
| 1372 | * or disabled. |
| 1373 | */ |
| 1374 | static int ca91cx42_lm_get(struct vme_lm_resource *lm, |
| 1375 | unsigned long long *lm_base, u32 *aspace, u32 *cycle) |
| 1376 | { |
| 1377 | u32 lm_ctl, enabled = 0; |
| 1378 | struct ca91cx42_driver *bridge; |
| 1379 | |
| 1380 | bridge = lm->parent->driver_priv; |
| 1381 | |
| 1382 | mutex_lock(&lm->mtx); |
| 1383 | |
| 1384 | *lm_base = (unsigned long long)ioread32(bridge->base + LM_BS); |
| 1385 | lm_ctl = ioread32(bridge->base + LM_CTL); |
| 1386 | |
| 1387 | if (lm_ctl & CA91CX42_LM_CTL_EN) |
| 1388 | enabled = 1; |
| 1389 | |
| 1390 | if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A16) |
| 1391 | *aspace = VME_A16; |
| 1392 | if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A24) |
| 1393 | *aspace = VME_A24; |
| 1394 | if ((lm_ctl & CA91CX42_LM_CTL_AS_M) == CA91CX42_LM_CTL_AS_A32) |
| 1395 | *aspace = VME_A32; |
| 1396 | |
| 1397 | *cycle = 0; |
| 1398 | if (lm_ctl & CA91CX42_LM_CTL_SUPR) |
| 1399 | *cycle |= VME_SUPER; |
| 1400 | if (lm_ctl & CA91CX42_LM_CTL_NPRIV) |
| 1401 | *cycle |= VME_USER; |
| 1402 | if (lm_ctl & CA91CX42_LM_CTL_PGM) |
| 1403 | *cycle |= VME_PROG; |
| 1404 | if (lm_ctl & CA91CX42_LM_CTL_DATA) |
| 1405 | *cycle |= VME_DATA; |
| 1406 | |
| 1407 | mutex_unlock(&lm->mtx); |
| 1408 | |
| 1409 | return enabled; |
| 1410 | } |
| 1411 | |
| 1412 | /* |
| 1413 | * Attach a callback to a specific location monitor. |
| 1414 | * |
| 1415 | * Callback will be passed the monitor triggered. |
| 1416 | */ |
| 1417 | static int ca91cx42_lm_attach(struct vme_lm_resource *lm, int monitor, |
| 1418 | void (*callback)(int)) |
| 1419 | { |
| 1420 | u32 lm_ctl, tmp; |
| 1421 | struct ca91cx42_driver *bridge; |
| 1422 | struct device *dev; |
| 1423 | |
| 1424 | bridge = lm->parent->driver_priv; |
| 1425 | dev = lm->parent->parent; |
| 1426 | |
| 1427 | mutex_lock(&lm->mtx); |
| 1428 | |
| 1429 | /* Ensure that the location monitor is configured - need PGM or DATA */ |
| 1430 | lm_ctl = ioread32(bridge->base + LM_CTL); |
| 1431 | if ((lm_ctl & (CA91CX42_LM_CTL_PGM | CA91CX42_LM_CTL_DATA)) == 0) { |
| 1432 | mutex_unlock(&lm->mtx); |
| 1433 | dev_err(dev, "Location monitor not properly configured\n"); |
| 1434 | return -EINVAL; |
| 1435 | } |
| 1436 | |
| 1437 | /* Check that a callback isn't already attached */ |
| 1438 | if (bridge->lm_callback[monitor] != NULL) { |
| 1439 | mutex_unlock(&lm->mtx); |
| 1440 | dev_err(dev, "Existing callback attached\n"); |
| 1441 | return -EBUSY; |
| 1442 | } |
| 1443 | |
| 1444 | /* Attach callback */ |
| 1445 | bridge->lm_callback[monitor] = callback; |
| 1446 | |
| 1447 | /* Enable Location Monitor interrupt */ |
| 1448 | tmp = ioread32(bridge->base + LINT_EN); |
| 1449 | tmp |= CA91CX42_LINT_LM[monitor]; |
| 1450 | iowrite32(tmp, bridge->base + LINT_EN); |
| 1451 | |
| 1452 | /* Ensure that global Location Monitor Enable set */ |
| 1453 | if ((lm_ctl & CA91CX42_LM_CTL_EN) == 0) { |
| 1454 | lm_ctl |= CA91CX42_LM_CTL_EN; |
| 1455 | iowrite32(lm_ctl, bridge->base + LM_CTL); |
| 1456 | } |
| 1457 | |
| 1458 | mutex_unlock(&lm->mtx); |
| 1459 | |
| 1460 | return 0; |
| 1461 | } |
| 1462 | |
| 1463 | /* |
| 1464 | * Detach a callback function forn a specific location monitor. |
| 1465 | */ |
| 1466 | static int ca91cx42_lm_detach(struct vme_lm_resource *lm, int monitor) |
| 1467 | { |
| 1468 | u32 tmp; |
| 1469 | struct ca91cx42_driver *bridge; |
| 1470 | |
| 1471 | bridge = lm->parent->driver_priv; |
| 1472 | |
| 1473 | mutex_lock(&lm->mtx); |
| 1474 | |
| 1475 | /* Disable Location Monitor and ensure previous interrupts are clear */ |
| 1476 | tmp = ioread32(bridge->base + LINT_EN); |
| 1477 | tmp &= ~CA91CX42_LINT_LM[monitor]; |
| 1478 | iowrite32(tmp, bridge->base + LINT_EN); |
| 1479 | |
| 1480 | iowrite32(CA91CX42_LINT_LM[monitor], |
| 1481 | bridge->base + LINT_STAT); |
| 1482 | |
| 1483 | /* Detach callback */ |
| 1484 | bridge->lm_callback[monitor] = NULL; |
| 1485 | |
| 1486 | /* If all location monitors disabled, disable global Location Monitor */ |
| 1487 | if ((tmp & (CA91CX42_LINT_LM0 | CA91CX42_LINT_LM1 | CA91CX42_LINT_LM2 | |
| 1488 | CA91CX42_LINT_LM3)) == 0) { |
| 1489 | tmp = ioread32(bridge->base + LM_CTL); |
| 1490 | tmp &= ~CA91CX42_LM_CTL_EN; |
| 1491 | iowrite32(tmp, bridge->base + LM_CTL); |
| 1492 | } |
| 1493 | |
| 1494 | mutex_unlock(&lm->mtx); |
| 1495 | |
| 1496 | return 0; |
| 1497 | } |
| 1498 | |
| 1499 | static int ca91cx42_slot_get(struct vme_bridge *ca91cx42_bridge) |
| 1500 | { |
| 1501 | u32 slot = 0; |
| 1502 | struct ca91cx42_driver *bridge; |
| 1503 | |
| 1504 | bridge = ca91cx42_bridge->driver_priv; |
| 1505 | |
| 1506 | if (!geoid) { |
| 1507 | slot = ioread32(bridge->base + VCSR_BS); |
| 1508 | slot = ((slot & CA91CX42_VCSR_BS_SLOT_M) >> 27); |
| 1509 | } else |
| 1510 | slot = geoid; |
| 1511 | |
| 1512 | return (int)slot; |
| 1513 | |
| 1514 | } |
| 1515 | |
| 1516 | static void *ca91cx42_alloc_consistent(struct device *parent, size_t size, |
| 1517 | dma_addr_t *dma) |
| 1518 | { |
| 1519 | struct pci_dev *pdev; |
| 1520 | |
| 1521 | /* Find pci_dev container of dev */ |
| 1522 | pdev = container_of(parent, struct pci_dev, dev); |
| 1523 | |
| 1524 | return pci_alloc_consistent(pdev, size, dma); |
| 1525 | } |
| 1526 | |
| 1527 | static void ca91cx42_free_consistent(struct device *parent, size_t size, |
| 1528 | void *vaddr, dma_addr_t dma) |
| 1529 | { |
| 1530 | struct pci_dev *pdev; |
| 1531 | |
| 1532 | /* Find pci_dev container of dev */ |
| 1533 | pdev = container_of(parent, struct pci_dev, dev); |
| 1534 | |
| 1535 | pci_free_consistent(pdev, size, vaddr, dma); |
| 1536 | } |
| 1537 | |
| 1538 | /* |
| 1539 | * Configure CR/CSR space |
| 1540 | * |
| 1541 | * Access to the CR/CSR can be configured at power-up. The location of the |
| 1542 | * CR/CSR registers in the CR/CSR address space is determined by the boards |
| 1543 | * Auto-ID or Geographic address. This function ensures that the window is |
| 1544 | * enabled at an offset consistent with the boards geopgraphic address. |
| 1545 | */ |
| 1546 | static int ca91cx42_crcsr_init(struct vme_bridge *ca91cx42_bridge, |
| 1547 | struct pci_dev *pdev) |
| 1548 | { |
| 1549 | unsigned int crcsr_addr; |
| 1550 | int tmp, slot; |
| 1551 | struct ca91cx42_driver *bridge; |
| 1552 | |
| 1553 | bridge = ca91cx42_bridge->driver_priv; |
| 1554 | |
| 1555 | slot = ca91cx42_slot_get(ca91cx42_bridge); |
| 1556 | |
| 1557 | /* Write CSR Base Address if slot ID is supplied as a module param */ |
| 1558 | if (geoid) |
| 1559 | iowrite32(geoid << 27, bridge->base + VCSR_BS); |
| 1560 | |
| 1561 | dev_info(&pdev->dev, "CR/CSR Offset: %d\n", slot); |
| 1562 | if (slot == 0) { |
| 1563 | dev_err(&pdev->dev, "Slot number is unset, not configuring " |
| 1564 | "CR/CSR space\n"); |
| 1565 | return -EINVAL; |
| 1566 | } |
| 1567 | |
| 1568 | /* Allocate mem for CR/CSR image */ |
| 1569 | bridge->crcsr_kernel = pci_zalloc_consistent(pdev, VME_CRCSR_BUF_SIZE, |
| 1570 | &bridge->crcsr_bus); |
| 1571 | if (bridge->crcsr_kernel == NULL) { |
| 1572 | dev_err(&pdev->dev, "Failed to allocate memory for CR/CSR " |
| 1573 | "image\n"); |
| 1574 | return -ENOMEM; |
| 1575 | } |
| 1576 | |
| 1577 | crcsr_addr = slot * (512 * 1024); |
| 1578 | iowrite32(bridge->crcsr_bus - crcsr_addr, bridge->base + VCSR_TO); |
| 1579 | |
| 1580 | tmp = ioread32(bridge->base + VCSR_CTL); |
| 1581 | tmp |= CA91CX42_VCSR_CTL_EN; |
| 1582 | iowrite32(tmp, bridge->base + VCSR_CTL); |
| 1583 | |
| 1584 | return 0; |
| 1585 | } |
| 1586 | |
| 1587 | static void ca91cx42_crcsr_exit(struct vme_bridge *ca91cx42_bridge, |
| 1588 | struct pci_dev *pdev) |
| 1589 | { |
| 1590 | u32 tmp; |
| 1591 | struct ca91cx42_driver *bridge; |
| 1592 | |
| 1593 | bridge = ca91cx42_bridge->driver_priv; |
| 1594 | |
| 1595 | /* Turn off CR/CSR space */ |
| 1596 | tmp = ioread32(bridge->base + VCSR_CTL); |
| 1597 | tmp &= ~CA91CX42_VCSR_CTL_EN; |
| 1598 | iowrite32(tmp, bridge->base + VCSR_CTL); |
| 1599 | |
| 1600 | /* Free image */ |
| 1601 | iowrite32(0, bridge->base + VCSR_TO); |
| 1602 | |
| 1603 | pci_free_consistent(pdev, VME_CRCSR_BUF_SIZE, bridge->crcsr_kernel, |
| 1604 | bridge->crcsr_bus); |
| 1605 | } |
| 1606 | |
| 1607 | static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id) |
| 1608 | { |
| 1609 | int retval, i; |
| 1610 | u32 data; |
| 1611 | struct list_head *pos = NULL, *n; |
| 1612 | struct vme_bridge *ca91cx42_bridge; |
| 1613 | struct ca91cx42_driver *ca91cx42_device; |
| 1614 | struct vme_master_resource *master_image; |
| 1615 | struct vme_slave_resource *slave_image; |
| 1616 | struct vme_dma_resource *dma_ctrlr; |
| 1617 | struct vme_lm_resource *lm; |
| 1618 | |
| 1619 | /* We want to support more than one of each bridge so we need to |
| 1620 | * dynamically allocate the bridge structure |
| 1621 | */ |
| 1622 | ca91cx42_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL); |
| 1623 | |
| 1624 | if (ca91cx42_bridge == NULL) { |
| 1625 | dev_err(&pdev->dev, "Failed to allocate memory for device " |
| 1626 | "structure\n"); |
| 1627 | retval = -ENOMEM; |
| 1628 | goto err_struct; |
| 1629 | } |
| 1630 | |
| 1631 | ca91cx42_device = kzalloc(sizeof(struct ca91cx42_driver), GFP_KERNEL); |
| 1632 | |
| 1633 | if (ca91cx42_device == NULL) { |
| 1634 | dev_err(&pdev->dev, "Failed to allocate memory for device " |
| 1635 | "structure\n"); |
| 1636 | retval = -ENOMEM; |
| 1637 | goto err_driver; |
| 1638 | } |
| 1639 | |
| 1640 | ca91cx42_bridge->driver_priv = ca91cx42_device; |
| 1641 | |
| 1642 | /* Enable the device */ |
| 1643 | retval = pci_enable_device(pdev); |
| 1644 | if (retval) { |
| 1645 | dev_err(&pdev->dev, "Unable to enable device\n"); |
| 1646 | goto err_enable; |
| 1647 | } |
| 1648 | |
| 1649 | /* Map Registers */ |
| 1650 | retval = pci_request_regions(pdev, driver_name); |
| 1651 | if (retval) { |
| 1652 | dev_err(&pdev->dev, "Unable to reserve resources\n"); |
| 1653 | goto err_resource; |
| 1654 | } |
| 1655 | |
| 1656 | /* map registers in BAR 0 */ |
| 1657 | ca91cx42_device->base = ioremap_nocache(pci_resource_start(pdev, 0), |
| 1658 | 4096); |
| 1659 | if (!ca91cx42_device->base) { |
| 1660 | dev_err(&pdev->dev, "Unable to remap CRG region\n"); |
| 1661 | retval = -EIO; |
| 1662 | goto err_remap; |
| 1663 | } |
| 1664 | |
| 1665 | /* Check to see if the mapping worked out */ |
| 1666 | data = ioread32(ca91cx42_device->base + CA91CX42_PCI_ID) & 0x0000FFFF; |
| 1667 | if (data != PCI_VENDOR_ID_TUNDRA) { |
| 1668 | dev_err(&pdev->dev, "PCI_ID check failed\n"); |
| 1669 | retval = -EIO; |
| 1670 | goto err_test; |
| 1671 | } |
| 1672 | |
| 1673 | /* Initialize wait queues & mutual exclusion flags */ |
| 1674 | init_waitqueue_head(&ca91cx42_device->dma_queue); |
| 1675 | init_waitqueue_head(&ca91cx42_device->iack_queue); |
| 1676 | mutex_init(&ca91cx42_device->vme_int); |
| 1677 | mutex_init(&ca91cx42_device->vme_rmw); |
| 1678 | |
| 1679 | ca91cx42_bridge->parent = &pdev->dev; |
| 1680 | strcpy(ca91cx42_bridge->name, driver_name); |
| 1681 | |
| 1682 | /* Setup IRQ */ |
| 1683 | retval = ca91cx42_irq_init(ca91cx42_bridge); |
| 1684 | if (retval != 0) { |
| 1685 | dev_err(&pdev->dev, "Chip Initialization failed.\n"); |
| 1686 | goto err_irq; |
| 1687 | } |
| 1688 | |
| 1689 | /* Add master windows to list */ |
| 1690 | INIT_LIST_HEAD(&ca91cx42_bridge->master_resources); |
| 1691 | for (i = 0; i < CA91C142_MAX_MASTER; i++) { |
| 1692 | master_image = kmalloc(sizeof(struct vme_master_resource), |
| 1693 | GFP_KERNEL); |
| 1694 | if (master_image == NULL) { |
| 1695 | dev_err(&pdev->dev, "Failed to allocate memory for " |
| 1696 | "master resource structure\n"); |
| 1697 | retval = -ENOMEM; |
| 1698 | goto err_master; |
| 1699 | } |
| 1700 | master_image->parent = ca91cx42_bridge; |
| 1701 | spin_lock_init(&master_image->lock); |
| 1702 | master_image->locked = 0; |
| 1703 | master_image->number = i; |
| 1704 | master_image->address_attr = VME_A16 | VME_A24 | VME_A32 | |
| 1705 | VME_CRCSR | VME_USER1 | VME_USER2; |
| 1706 | master_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | |
| 1707 | VME_SUPER | VME_USER | VME_PROG | VME_DATA; |
| 1708 | master_image->width_attr = VME_D8 | VME_D16 | VME_D32 | VME_D64; |
| 1709 | memset(&master_image->bus_resource, 0, |
| 1710 | sizeof(struct resource)); |
| 1711 | master_image->kern_base = NULL; |
| 1712 | list_add_tail(&master_image->list, |
| 1713 | &ca91cx42_bridge->master_resources); |
| 1714 | } |
| 1715 | |
| 1716 | /* Add slave windows to list */ |
| 1717 | INIT_LIST_HEAD(&ca91cx42_bridge->slave_resources); |
| 1718 | for (i = 0; i < CA91C142_MAX_SLAVE; i++) { |
| 1719 | slave_image = kmalloc(sizeof(struct vme_slave_resource), |
| 1720 | GFP_KERNEL); |
| 1721 | if (slave_image == NULL) { |
| 1722 | dev_err(&pdev->dev, "Failed to allocate memory for " |
| 1723 | "slave resource structure\n"); |
| 1724 | retval = -ENOMEM; |
| 1725 | goto err_slave; |
| 1726 | } |
| 1727 | slave_image->parent = ca91cx42_bridge; |
| 1728 | mutex_init(&slave_image->mtx); |
| 1729 | slave_image->locked = 0; |
| 1730 | slave_image->number = i; |
| 1731 | slave_image->address_attr = VME_A24 | VME_A32 | VME_USER1 | |
| 1732 | VME_USER2; |
| 1733 | |
| 1734 | /* Only windows 0 and 4 support A16 */ |
| 1735 | if (i == 0 || i == 4) |
| 1736 | slave_image->address_attr |= VME_A16; |
| 1737 | |
| 1738 | slave_image->cycle_attr = VME_SCT | VME_BLT | VME_MBLT | |
| 1739 | VME_SUPER | VME_USER | VME_PROG | VME_DATA; |
| 1740 | list_add_tail(&slave_image->list, |
| 1741 | &ca91cx42_bridge->slave_resources); |
| 1742 | } |
| 1743 | |
| 1744 | /* Add dma engines to list */ |
| 1745 | INIT_LIST_HEAD(&ca91cx42_bridge->dma_resources); |
| 1746 | for (i = 0; i < CA91C142_MAX_DMA; i++) { |
| 1747 | dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource), |
| 1748 | GFP_KERNEL); |
| 1749 | if (dma_ctrlr == NULL) { |
| 1750 | dev_err(&pdev->dev, "Failed to allocate memory for " |
| 1751 | "dma resource structure\n"); |
| 1752 | retval = -ENOMEM; |
| 1753 | goto err_dma; |
| 1754 | } |
| 1755 | dma_ctrlr->parent = ca91cx42_bridge; |
| 1756 | mutex_init(&dma_ctrlr->mtx); |
| 1757 | dma_ctrlr->locked = 0; |
| 1758 | dma_ctrlr->number = i; |
| 1759 | dma_ctrlr->route_attr = VME_DMA_VME_TO_MEM | |
| 1760 | VME_DMA_MEM_TO_VME; |
| 1761 | INIT_LIST_HEAD(&dma_ctrlr->pending); |
| 1762 | INIT_LIST_HEAD(&dma_ctrlr->running); |
| 1763 | list_add_tail(&dma_ctrlr->list, |
| 1764 | &ca91cx42_bridge->dma_resources); |
| 1765 | } |
| 1766 | |
| 1767 | /* Add location monitor to list */ |
| 1768 | INIT_LIST_HEAD(&ca91cx42_bridge->lm_resources); |
| 1769 | lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL); |
| 1770 | if (lm == NULL) { |
| 1771 | dev_err(&pdev->dev, "Failed to allocate memory for " |
| 1772 | "location monitor resource structure\n"); |
| 1773 | retval = -ENOMEM; |
| 1774 | goto err_lm; |
| 1775 | } |
| 1776 | lm->parent = ca91cx42_bridge; |
| 1777 | mutex_init(&lm->mtx); |
| 1778 | lm->locked = 0; |
| 1779 | lm->number = 1; |
| 1780 | lm->monitors = 4; |
| 1781 | list_add_tail(&lm->list, &ca91cx42_bridge->lm_resources); |
| 1782 | |
| 1783 | ca91cx42_bridge->slave_get = ca91cx42_slave_get; |
| 1784 | ca91cx42_bridge->slave_set = ca91cx42_slave_set; |
| 1785 | ca91cx42_bridge->master_get = ca91cx42_master_get; |
| 1786 | ca91cx42_bridge->master_set = ca91cx42_master_set; |
| 1787 | ca91cx42_bridge->master_read = ca91cx42_master_read; |
| 1788 | ca91cx42_bridge->master_write = ca91cx42_master_write; |
| 1789 | ca91cx42_bridge->master_rmw = ca91cx42_master_rmw; |
| 1790 | ca91cx42_bridge->dma_list_add = ca91cx42_dma_list_add; |
| 1791 | ca91cx42_bridge->dma_list_exec = ca91cx42_dma_list_exec; |
| 1792 | ca91cx42_bridge->dma_list_empty = ca91cx42_dma_list_empty; |
| 1793 | ca91cx42_bridge->irq_set = ca91cx42_irq_set; |
| 1794 | ca91cx42_bridge->irq_generate = ca91cx42_irq_generate; |
| 1795 | ca91cx42_bridge->lm_set = ca91cx42_lm_set; |
| 1796 | ca91cx42_bridge->lm_get = ca91cx42_lm_get; |
| 1797 | ca91cx42_bridge->lm_attach = ca91cx42_lm_attach; |
| 1798 | ca91cx42_bridge->lm_detach = ca91cx42_lm_detach; |
| 1799 | ca91cx42_bridge->slot_get = ca91cx42_slot_get; |
| 1800 | ca91cx42_bridge->alloc_consistent = ca91cx42_alloc_consistent; |
| 1801 | ca91cx42_bridge->free_consistent = ca91cx42_free_consistent; |
| 1802 | |
| 1803 | data = ioread32(ca91cx42_device->base + MISC_CTL); |
| 1804 | dev_info(&pdev->dev, "Board is%s the VME system controller\n", |
| 1805 | (data & CA91CX42_MISC_CTL_SYSCON) ? "" : " not"); |
| 1806 | dev_info(&pdev->dev, "Slot ID is %d\n", |
| 1807 | ca91cx42_slot_get(ca91cx42_bridge)); |
| 1808 | |
| 1809 | if (ca91cx42_crcsr_init(ca91cx42_bridge, pdev)) |
| 1810 | dev_err(&pdev->dev, "CR/CSR configuration failed.\n"); |
| 1811 | |
| 1812 | /* Need to save ca91cx42_bridge pointer locally in link list for use in |
| 1813 | * ca91cx42_remove() |
| 1814 | */ |
| 1815 | retval = vme_register_bridge(ca91cx42_bridge); |
| 1816 | if (retval != 0) { |
| 1817 | dev_err(&pdev->dev, "Chip Registration failed.\n"); |
| 1818 | goto err_reg; |
| 1819 | } |
| 1820 | |
| 1821 | pci_set_drvdata(pdev, ca91cx42_bridge); |
| 1822 | |
| 1823 | return 0; |
| 1824 | |
| 1825 | err_reg: |
| 1826 | ca91cx42_crcsr_exit(ca91cx42_bridge, pdev); |
| 1827 | err_lm: |
| 1828 | /* resources are stored in link list */ |
| 1829 | list_for_each_safe(pos, n, &ca91cx42_bridge->lm_resources) { |
| 1830 | lm = list_entry(pos, struct vme_lm_resource, list); |
| 1831 | list_del(pos); |
| 1832 | kfree(lm); |
| 1833 | } |
| 1834 | err_dma: |
| 1835 | /* resources are stored in link list */ |
| 1836 | list_for_each_safe(pos, n, &ca91cx42_bridge->dma_resources) { |
| 1837 | dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); |
| 1838 | list_del(pos); |
| 1839 | kfree(dma_ctrlr); |
| 1840 | } |
| 1841 | err_slave: |
| 1842 | /* resources are stored in link list */ |
| 1843 | list_for_each_safe(pos, n, &ca91cx42_bridge->slave_resources) { |
| 1844 | slave_image = list_entry(pos, struct vme_slave_resource, list); |
| 1845 | list_del(pos); |
| 1846 | kfree(slave_image); |
| 1847 | } |
| 1848 | err_master: |
| 1849 | /* resources are stored in link list */ |
| 1850 | list_for_each_safe(pos, n, &ca91cx42_bridge->master_resources) { |
| 1851 | master_image = list_entry(pos, struct vme_master_resource, |
| 1852 | list); |
| 1853 | list_del(pos); |
| 1854 | kfree(master_image); |
| 1855 | } |
| 1856 | |
| 1857 | ca91cx42_irq_exit(ca91cx42_device, pdev); |
| 1858 | err_irq: |
| 1859 | err_test: |
| 1860 | iounmap(ca91cx42_device->base); |
| 1861 | err_remap: |
| 1862 | pci_release_regions(pdev); |
| 1863 | err_resource: |
| 1864 | pci_disable_device(pdev); |
| 1865 | err_enable: |
| 1866 | kfree(ca91cx42_device); |
| 1867 | err_driver: |
| 1868 | kfree(ca91cx42_bridge); |
| 1869 | err_struct: |
| 1870 | return retval; |
| 1871 | |
| 1872 | } |
| 1873 | |
| 1874 | static void ca91cx42_remove(struct pci_dev *pdev) |
| 1875 | { |
| 1876 | struct list_head *pos = NULL, *n; |
| 1877 | struct vme_master_resource *master_image; |
| 1878 | struct vme_slave_resource *slave_image; |
| 1879 | struct vme_dma_resource *dma_ctrlr; |
| 1880 | struct vme_lm_resource *lm; |
| 1881 | struct ca91cx42_driver *bridge; |
| 1882 | struct vme_bridge *ca91cx42_bridge = pci_get_drvdata(pdev); |
| 1883 | |
| 1884 | bridge = ca91cx42_bridge->driver_priv; |
| 1885 | |
| 1886 | |
| 1887 | /* Turn off Ints */ |
| 1888 | iowrite32(0, bridge->base + LINT_EN); |
| 1889 | |
| 1890 | /* Turn off the windows */ |
| 1891 | iowrite32(0x00800000, bridge->base + LSI0_CTL); |
| 1892 | iowrite32(0x00800000, bridge->base + LSI1_CTL); |
| 1893 | iowrite32(0x00800000, bridge->base + LSI2_CTL); |
| 1894 | iowrite32(0x00800000, bridge->base + LSI3_CTL); |
| 1895 | iowrite32(0x00800000, bridge->base + LSI4_CTL); |
| 1896 | iowrite32(0x00800000, bridge->base + LSI5_CTL); |
| 1897 | iowrite32(0x00800000, bridge->base + LSI6_CTL); |
| 1898 | iowrite32(0x00800000, bridge->base + LSI7_CTL); |
| 1899 | iowrite32(0x00F00000, bridge->base + VSI0_CTL); |
| 1900 | iowrite32(0x00F00000, bridge->base + VSI1_CTL); |
| 1901 | iowrite32(0x00F00000, bridge->base + VSI2_CTL); |
| 1902 | iowrite32(0x00F00000, bridge->base + VSI3_CTL); |
| 1903 | iowrite32(0x00F00000, bridge->base + VSI4_CTL); |
| 1904 | iowrite32(0x00F00000, bridge->base + VSI5_CTL); |
| 1905 | iowrite32(0x00F00000, bridge->base + VSI6_CTL); |
| 1906 | iowrite32(0x00F00000, bridge->base + VSI7_CTL); |
| 1907 | |
| 1908 | vme_unregister_bridge(ca91cx42_bridge); |
| 1909 | |
| 1910 | ca91cx42_crcsr_exit(ca91cx42_bridge, pdev); |
| 1911 | |
| 1912 | /* resources are stored in link list */ |
| 1913 | list_for_each_safe(pos, n, &ca91cx42_bridge->lm_resources) { |
| 1914 | lm = list_entry(pos, struct vme_lm_resource, list); |
| 1915 | list_del(pos); |
| 1916 | kfree(lm); |
| 1917 | } |
| 1918 | |
| 1919 | /* resources are stored in link list */ |
| 1920 | list_for_each_safe(pos, n, &ca91cx42_bridge->dma_resources) { |
| 1921 | dma_ctrlr = list_entry(pos, struct vme_dma_resource, list); |
| 1922 | list_del(pos); |
| 1923 | kfree(dma_ctrlr); |
| 1924 | } |
| 1925 | |
| 1926 | /* resources are stored in link list */ |
| 1927 | list_for_each_safe(pos, n, &ca91cx42_bridge->slave_resources) { |
| 1928 | slave_image = list_entry(pos, struct vme_slave_resource, list); |
| 1929 | list_del(pos); |
| 1930 | kfree(slave_image); |
| 1931 | } |
| 1932 | |
| 1933 | /* resources are stored in link list */ |
| 1934 | list_for_each_safe(pos, n, &ca91cx42_bridge->master_resources) { |
| 1935 | master_image = list_entry(pos, struct vme_master_resource, |
| 1936 | list); |
| 1937 | list_del(pos); |
| 1938 | kfree(master_image); |
| 1939 | } |
| 1940 | |
| 1941 | ca91cx42_irq_exit(bridge, pdev); |
| 1942 | |
| 1943 | iounmap(bridge->base); |
| 1944 | |
| 1945 | pci_release_regions(pdev); |
| 1946 | |
| 1947 | pci_disable_device(pdev); |
| 1948 | |
| 1949 | kfree(ca91cx42_bridge); |
| 1950 | } |
| 1951 | |
| 1952 | module_pci_driver(ca91cx42_driver); |
| 1953 | |
| 1954 | MODULE_PARM_DESC(geoid, "Override geographical addressing"); |
| 1955 | module_param(geoid, int, 0); |
| 1956 | |
| 1957 | MODULE_DESCRIPTION("VME driver for the Tundra Universe II VME bridge"); |
| 1958 | MODULE_LICENSE("GPL"); |