diff --git a/drivers/net/5701rls.c b/drivers/net/5701rls.c
deleted file mode 100644
index 86950d0..0000000
--- a/drivers/net/5701rls.c
+++ /dev/null
@@ -1,46 +0,0 @@
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/* History:                                                                   */
-/*                                                                            */
-/******************************************************************************/
-
-#if INCLUDE_5701_AX_FIX
-
-#include "bcm570x_mm.h"
-#include "5701rls.h"
-
-LM_STATUS LM_LoadRlsFirmware(PLM_DEVICE_BLOCK pDevice)
-{
-  T3_FWIMG_INFO FwImgInfo;
-
-  FwImgInfo.StartAddress = t3FwStartAddr;
-  FwImgInfo.Text.Buffer = (PLM_UINT8)t3FwText;
-  FwImgInfo.Text.Offset  = t3FwTextAddr;
-  FwImgInfo.Text.Length  = t3FwTextLen;
-  FwImgInfo.ROnlyData.Buffer = (PLM_UINT8)t3FwRodata;
-  FwImgInfo.ROnlyData.Offset  = t3FwRodataAddr;
-  FwImgInfo.ROnlyData.Length  = t3FwRodataLen;
-  FwImgInfo.Data.Buffer = (PLM_UINT8)t3FwData;
-  FwImgInfo.Data.Offset  = t3FwDataAddr;
-  FwImgInfo.Data.Length  = t3FwDataLen;
-
-  if (LM_LoadFirmware(pDevice,
-		      &FwImgInfo,
-		      T3_RX_CPU_ID | T3_TX_CPU_ID,
-		      T3_RX_CPU_ID) != LM_STATUS_SUCCESS)
-    {
-      return LM_STATUS_FAILURE;
-    }
-
-  return LM_STATUS_SUCCESS;
-}
-
-#endif /* INCLUDE_5701_AX_FIX */
diff --git a/drivers/net/5701rls.h b/drivers/net/5701rls.h
deleted file mode 100644
index 30b127a..0000000
--- a/drivers/net/5701rls.h
+++ /dev/null
@@ -1,198 +0,0 @@
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/* History:                                                                   */
-/******************************************************************************/
-
-typedef unsigned long U32;
-int t3FwReleaseMajor = 0x0;
-int t3FwReleaseMinor = 0x0;
-int t3FwReleaseFix = 0x0;
-U32 t3FwStartAddr = 0x08000000;
-U32 t3FwTextAddr = 0x08000000;
-int t3FwTextLen = 0x9c0;
-U32 t3FwRodataAddr = 0x080009c0;
-int t3FwRodataLen = 0x60;
-U32 t3FwDataAddr = 0x08000a40;
-int t3FwDataLen = 0x20;
-U32 t3FwSbssAddr = 0x08000a60;
-int t3FwSbssLen = 0xc;
-U32 t3FwBssAddr = 0x08000a70;
-int t3FwBssLen = 0x10;
-U32 t3FwText[(0x9c0/4) + 1] = {
-0x0,
-0x10000003, 0x0, 0xd, 0xd,
-0x3c1d0800, 0x37bd3ffc, 0x3a0f021, 0x3c100800,
-0x26100000, 0xe000018, 0x0, 0xd,
-0x3c1d0800, 0x37bd3ffc, 0x3a0f021, 0x3c100800,
-0x26100034, 0xe00021c, 0x0, 0xd,
-0x0, 0x0, 0x0, 0x27bdffe0,
-0x3c1cc000, 0xafbf0018, 0xaf80680c, 0xe00004c,
-0x241b2105, 0x97850000, 0x97870002, 0x9782002c,
-0x9783002e, 0x3c040800, 0x248409c0, 0xafa00014,
-0x21400, 0x621825, 0x52c00, 0xafa30010,
-0x8f860010, 0xe52825, 0xe000060, 0x24070102,
-0x3c02ac00, 0x34420100, 0x3c03ac01, 0x34630100,
-0xaf820490, 0x3c02ffff, 0xaf820494, 0xaf830498,
-0xaf82049c, 0x24020001, 0xaf825ce0, 0xe00003f,
-0xaf825d00, 0xe000140, 0x0, 0x8fbf0018,
-0x3e00008, 0x27bd0020, 0x2402ffff, 0xaf825404,
-0x8f835400, 0x34630400, 0xaf835400, 0xaf825404,
-0x3c020800, 0x24420034, 0xaf82541c, 0x3e00008,
-0xaf805400, 0x0, 0x0, 0x3c020800,
-0x34423000, 0x3c030800, 0x34633000, 0x3c040800,
-0x348437ff, 0x3c010800, 0xac220a64, 0x24020040,
-0x3c010800, 0xac220a68, 0x3c010800, 0xac200a60,
-0xac600000, 0x24630004, 0x83102b, 0x5040fffd,
-0xac600000, 0x3e00008, 0x0, 0x804821,
-0x8faa0010, 0x3c020800, 0x8c420a60, 0x3c040800,
-0x8c840a68, 0x8fab0014, 0x24430001, 0x44102b,
-0x3c010800, 0xac230a60, 0x14400003, 0x4021,
-0x3c010800, 0xac200a60, 0x3c020800, 0x8c420a60,
-0x3c030800, 0x8c630a64, 0x91240000, 0x21140,
-0x431021, 0x481021, 0x25080001, 0xa0440000,
-0x29020008, 0x1440fff4, 0x25290001, 0x3c020800,
-0x8c420a60, 0x3c030800, 0x8c630a64, 0x8f84680c,
-0x21140, 0x431021, 0xac440008, 0xac45000c,
-0xac460010, 0xac470014, 0xac4a0018, 0x3e00008,
-0xac4b001c, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x2000008,
-0x0, 0xa0001e3, 0x3c0a0001, 0xa0001e3,
-0x3c0a0002, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x3c0a0007, 0xa0001e3, 0x3c0a0008, 0xa0001e3,
-0x3c0a0009, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x3c0a000b, 0xa0001e3,
-0x3c0a000c, 0xa0001e3, 0x3c0a000d, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x3c0a000e, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x0, 0xa0001e3,
-0x0, 0xa0001e3, 0x3c0a0013, 0xa0001e3,
-0x3c0a0014, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x27bdffe0,
-0x1821, 0x1021, 0xafbf0018, 0xafb10014,
-0xafb00010, 0x3c010800, 0x220821, 0xac200a70,
-0x3c010800, 0x220821, 0xac200a74, 0x3c010800,
-0x220821, 0xac200a78, 0x24630001, 0x1860fff5,
-0x2442000c, 0x24110001, 0x8f906810, 0x32020004,
-0x14400005, 0x24040001, 0x3c020800, 0x8c420a78,
-0x18400003, 0x2021, 0xe000182, 0x0,
-0x32020001, 0x10400003, 0x0, 0xe000169,
-0x0, 0xa000153, 0xaf915028, 0x8fbf0018,
-0x8fb10014, 0x8fb00010, 0x3e00008, 0x27bd0020,
-0x3c050800, 0x8ca50a70, 0x3c060800, 0x8cc60a80,
-0x3c070800, 0x8ce70a78, 0x27bdffe0, 0x3c040800,
-0x248409d0, 0xafbf0018, 0xafa00010, 0xe000060,
-0xafa00014, 0xe00017b, 0x2021, 0x8fbf0018,
-0x3e00008, 0x27bd0020, 0x24020001, 0x8f836810,
-0x821004, 0x21027, 0x621824, 0x3e00008,
-0xaf836810, 0x27bdffd8, 0xafbf0024, 0x1080002e,
-0xafb00020, 0x8f825cec, 0xafa20018, 0x8f825cec,
-0x3c100800, 0x26100a78, 0xafa2001c, 0x34028000,
-0xaf825cec, 0x8e020000, 0x18400016, 0x0,
-0x3c020800, 0x94420a74, 0x8fa3001c, 0x221c0,
-0xac830004, 0x8fa2001c, 0x3c010800, 0xe000201,
-0xac220a74, 0x10400005, 0x0, 0x8e020000,
-0x24420001, 0xa0001df, 0xae020000, 0x3c020800,
-0x8c420a70, 0x21c02, 0x321c0, 0xa0001c5,
-0xafa2001c, 0xe000201, 0x0, 0x1040001f,
-0x0, 0x8e020000, 0x8fa3001c, 0x24420001,
-0x3c010800, 0xac230a70, 0x3c010800, 0xac230a74,
-0xa0001df, 0xae020000, 0x3c100800, 0x26100a78,
-0x8e020000, 0x18400028, 0x0, 0xe000201,
-0x0, 0x14400024, 0x0, 0x8e020000,
-0x3c030800, 0x8c630a70, 0x2442ffff, 0xafa3001c,
-0x18400006, 0xae020000, 0x31402, 0x221c0,
-0x8c820004, 0x3c010800, 0xac220a70, 0x97a2001e,
-0x2442ff00, 0x2c420300, 0x1440000b, 0x24024000,
-0x3c040800, 0x248409dc, 0xafa00010, 0xafa00014,
-0x8fa6001c, 0x24050008, 0xe000060, 0x3821,
-0xa0001df, 0x0, 0xaf825cf8, 0x3c020800,
-0x8c420a40, 0x8fa3001c, 0x24420001, 0xaf835cf8,
-0x3c010800, 0xac220a40, 0x8fbf0024, 0x8fb00020,
-0x3e00008, 0x27bd0028, 0x27bdffe0, 0x3c040800,
-0x248409e8, 0x2821, 0x3021, 0x3821,
-0xafbf0018, 0xafa00010, 0xe000060, 0xafa00014,
-0x8fbf0018, 0x3e00008, 0x27bd0020, 0x8f82680c,
-0x8f85680c, 0x21827, 0x3182b, 0x31823,
-0x431024, 0x441021, 0xa2282b, 0x10a00006,
-0x0, 0x401821, 0x8f82680c, 0x43102b,
-0x1440fffd, 0x0, 0x3e00008, 0x0,
-0x3c040800, 0x8c840000, 0x3c030800, 0x8c630a40,
-0x64102b, 0x54400002, 0x831023, 0x641023,
-0x2c420008, 0x3e00008, 0x38420001, 0x27bdffe0,
-0x802821, 0x3c040800, 0x24840a00, 0x3021,
-0x3821, 0xafbf0018, 0xafa00010, 0xe000060,
-0xafa00014, 0xa000216, 0x0, 0x8fbf0018,
-0x3e00008, 0x27bd0020, 0x0, 0x27bdffe0,
-0x3c1cc000, 0xafbf0018, 0xe00004c, 0xaf80680c,
-0x3c040800, 0x24840a10, 0x3802821, 0x3021,
-0x3821, 0xafa00010, 0xe000060, 0xafa00014,
-0x2402ffff, 0xaf825404, 0x3c0200aa, 0xe000234,
-0xaf825434, 0x8fbf0018, 0x3e00008, 0x27bd0020,
-0x0, 0x0, 0x0, 0x27bdffe8,
-0xafb00010, 0x24100001, 0xafbf0014, 0x3c01c003,
-0xac200000, 0x8f826810, 0x30422000, 0x10400003,
-0x0, 0xe000246, 0x0, 0xa00023a,
-0xaf905428, 0x8fbf0014, 0x8fb00010, 0x3e00008,
-0x27bd0018, 0x27bdfff8, 0x8f845d0c, 0x3c0200ff,
-0x3c030800, 0x8c630a50, 0x3442fff8, 0x821024,
-0x1043001e, 0x3c0500ff, 0x34a5fff8, 0x3c06c003,
-0x3c074000, 0x851824, 0x8c620010, 0x3c010800,
-0xac230a50, 0x30420008, 0x10400005, 0x871025,
-0x8cc20000, 0x24420001, 0xacc20000, 0x871025,
-0xaf825d0c, 0x8fa20000, 0x24420001, 0xafa20000,
-0x8fa20000, 0x8fa20000, 0x24420001, 0xafa20000,
-0x8fa20000, 0x8f845d0c, 0x3c030800, 0x8c630a50,
-0x851024, 0x1443ffe8, 0x851824, 0x27bd0008,
-0x3e00008, 0x0, 0x0, 0x0 };
-U32 t3FwRodata[(0x60/4) + 1] = {
-0x35373031, 0x726c7341, 0x0,
-0x0, 0x53774576, 0x656e7430, 0x0,
-0x726c7045, 0x76656e74, 0x31000000, 0x556e6b6e,
-0x45766e74, 0x0, 0x0, 0x0,
-0x0, 0x66617461, 0x6c457272, 0x0,
-0x0, 0x4d61696e, 0x43707542, 0x0,
-0x0, 0x0 };
-U32 t3FwData[(0x20/4) + 1] = {
-0x0, 0x0, 0x0,
-0x0, 0x0, 0x0, 0x0,
-0x0, 0x0 };
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 1f94360..2651e5f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -31,9 +31,6 @@
 COBJS-$(CONFIG_ARMADA100_FEC) += armada100_fec.o
 COBJS-$(CONFIG_DRIVER_AT91EMAC) += at91_emac.o
 COBJS-$(CONFIG_DRIVER_AX88180) += ax88180.o
-COBJS-$(CONFIG_BCM570x) += bcm570x.o
-COBJS-$(CONFIG_BCM570x) += bcm570x_autoneg.o
-COBJS-$(CONFIG_BCM570x) += 5701rls.o
 COBJS-$(CONFIG_BFIN_MAC) += bfin_mac.o
 COBJS-$(CONFIG_CS8900) += cs8900.o
 COBJS-$(CONFIG_TULIP) += dc2114x.o
@@ -76,9 +73,6 @@
 COBJS-$(CONFIG_SH_ETHER) += sh_eth.o
 COBJS-$(CONFIG_SMC91111) += smc91111.o
 COBJS-$(CONFIG_SMC911X) += smc911x.o
-COBJS-$(CONFIG_TIGON3) += tigon3.o
-COBJS-$(CONFIG_TIGON3) += bcm570x_autoneg.o
-COBJS-$(CONFIG_TIGON3) += 5701rls.o
 COBJS-$(CONFIG_DRIVER_TI_EMAC) += davinci_emac.o
 COBJS-$(CONFIG_TSEC_ENET) += tsec.o fsl_mdio.o
 COBJS-$(CONFIG_FMAN_ENET) += fsl_mdio.o
diff --git a/drivers/net/bcm570x.c b/drivers/net/bcm570x.c
deleted file mode 100644
index c250d44..0000000
--- a/drivers/net/bcm570x.c
+++ /dev/null
@@ -1,1598 +0,0 @@
-/*
- * Broadcom BCM570x Ethernet Driver for U-Boot.
- * Support 5701, 5702, 5703, and 5704. Single instance driver.
- * Copyright (C) 2002 James F. Dougherty (jfd@broadcom.com)
- */
-
-#include <common.h>
-
-#ifdef CONFIG_BMW
-#include <mpc824x.h>
-#endif
-#include <net.h>
-#include "bcm570x_mm.h"
-#include "bcm570x_autoneg.h"
-#include <pci.h>
-#include <malloc.h>
-
-/*
- * PCI Registers and definitions.
- */
-#define PCI_CMD_MASK	0xffff0000	/* mask to save status bits */
-#define PCI_ANY_ID (~0)
-
-/*
- * PCI memory base for Ethernet device as well as device Interrupt.
- */
-#define BCM570X_MBAR	0x80100000
-#define BCM570X_ILINE   1
-
-#define SECOND_USEC	1000000
-#define MAX_PACKET_SIZE 1600
-#define MAX_UNITS       4
-
-/* Globals to this module */
-int initialized = 0;
-unsigned int ioBase = 0;
-volatile PLM_DEVICE_BLOCK pDevice = NULL;	/* 570x softc */
-volatile PUM_DEVICE_BLOCK pUmDevice = NULL;
-
-/* Used to pass the full-duplex flag, etc. */
-int line_speed[MAX_UNITS] = { 0, 0, 0, 0 };
-static int full_duplex[MAX_UNITS] = { 1, 1, 1, 1 };
-static int rx_flow_control[MAX_UNITS] = { 0, 0, 0, 0 };
-static int tx_flow_control[MAX_UNITS] = { 0, 0, 0, 0 };
-static int auto_flow_control[MAX_UNITS] = { 0, 0, 0, 0 };
-static int tx_checksum[MAX_UNITS] = { 1, 1, 1, 1 };
-static int rx_checksum[MAX_UNITS] = { 1, 1, 1, 1 };
-static int auto_speed[MAX_UNITS] = { 1, 1, 1, 1 };
-
-#if JUMBO_FRAMES
-/* Jumbo MTU for interfaces. */
-static int mtu[MAX_UNITS] = { 0, 0, 0, 0 };
-#endif
-
-/* Turn on Wake-on lan for a device unit */
-static int enable_wol[MAX_UNITS] = { 0, 0, 0, 0 };
-
-#define TX_DESC_CNT DEFAULT_TX_PACKET_DESC_COUNT
-static unsigned int tx_pkt_desc_cnt[MAX_UNITS] =
-    { TX_DESC_CNT, TX_DESC_CNT, TX_DESC_CNT, TX_DESC_CNT };
-
-#define RX_DESC_CNT DEFAULT_STD_RCV_DESC_COUNT
-static unsigned int rx_std_desc_cnt[MAX_UNITS] =
-    { RX_DESC_CNT, RX_DESC_CNT, RX_DESC_CNT, RX_DESC_CNT };
-
-static unsigned int rx_adaptive_coalesce[MAX_UNITS] = { 1, 1, 1, 1 };
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-#define JBO_DESC_CNT DEFAULT_JUMBO_RCV_DESC_COUNT
-static unsigned int rx_jumbo_desc_cnt[MAX_UNITS] =
-    { JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT, JBO_DESC_CNT };
-#endif
-#define RX_COAL_TK DEFAULT_RX_COALESCING_TICKS
-static unsigned int rx_coalesce_ticks[MAX_UNITS] =
-    { RX_COAL_TK, RX_COAL_TK, RX_COAL_TK, RX_COAL_TK };
-
-#define RX_COAL_FM DEFAULT_RX_MAX_COALESCED_FRAMES
-static unsigned int rx_max_coalesce_frames[MAX_UNITS] =
-    { RX_COAL_FM, RX_COAL_FM, RX_COAL_FM, RX_COAL_FM };
-
-#define TX_COAL_TK DEFAULT_TX_COALESCING_TICKS
-static unsigned int tx_coalesce_ticks[MAX_UNITS] =
-    { TX_COAL_TK, TX_COAL_TK, TX_COAL_TK, TX_COAL_TK };
-
-#define TX_COAL_FM DEFAULT_TX_MAX_COALESCED_FRAMES
-static unsigned int tx_max_coalesce_frames[MAX_UNITS] =
-    { TX_COAL_FM, TX_COAL_FM, TX_COAL_FM, TX_COAL_FM };
-
-#define ST_COAL_TK DEFAULT_STATS_COALESCING_TICKS
-static unsigned int stats_coalesce_ticks[MAX_UNITS] =
-    { ST_COAL_TK, ST_COAL_TK, ST_COAL_TK, ST_COAL_TK };
-
-/*
- * Legitimate values for BCM570x device types
- */
-typedef enum {
-	BCM5700VIGIL = 0,
-	BCM5700A6,
-	BCM5700T6,
-	BCM5700A9,
-	BCM5700T9,
-	BCM5700,
-	BCM5701A5,
-	BCM5701T1,
-	BCM5701T8,
-	BCM5701A7,
-	BCM5701A10,
-	BCM5701A12,
-	BCM5701,
-	BCM5702,
-	BCM5703,
-	BCM5703A31,
-	TC996T,
-	TC996ST,
-	TC996SSX,
-	TC996SX,
-	TC996BT,
-	TC997T,
-	TC997SX,
-	TC1000T,
-	TC940BR01,
-	TC942BR01,
-	NC6770,
-	NC7760,
-	NC7770,
-	NC7780
-} board_t;
-
-/* Chip-Rev names for each device-type */
-static struct {
-	char *name;
-} chip_rev[] = {
-	{
-	"BCM5700VIGIL"}, {
-	"BCM5700A6"}, {
-	"BCM5700T6"}, {
-	"BCM5700A9"}, {
-	"BCM5700T9"}, {
-	"BCM5700"}, {
-	"BCM5701A5"}, {
-	"BCM5701T1"}, {
-	"BCM5701T8"}, {
-	"BCM5701A7"}, {
-	"BCM5701A10"}, {
-	"BCM5701A12"}, {
-	"BCM5701"}, {
-	"BCM5702"}, {
-	"BCM5703"}, {
-	"BCM5703A31"}, {
-	"TC996T"}, {
-	"TC996ST"}, {
-	"TC996SSX"}, {
-	"TC996SX"}, {
-	"TC996BT"}, {
-	"TC997T"}, {
-	"TC997SX"}, {
-	"TC1000T"}, {
-	"TC940BR01"}, {
-	"TC942BR01"}, {
-	"NC6770"}, {
-	"NC7760"}, {
-	"NC7770"}, {
-	"NC7780"}, {
-	0}
-};
-
-/* indexed by board_t, above */
-static struct {
-	char *name;
-} board_info[] = {
-	{
-	"Broadcom Vigil B5700 1000Base-T"}, {
-	"Broadcom BCM5700 1000Base-T"}, {
-	"Broadcom BCM5700 1000Base-SX"}, {
-	"Broadcom BCM5700 1000Base-SX"}, {
-	"Broadcom BCM5700 1000Base-T"}, {
-	"Broadcom BCM5700"}, {
-	"Broadcom BCM5701 1000Base-T"}, {
-	"Broadcom BCM5701 1000Base-T"}, {
-	"Broadcom BCM5701 1000Base-T"}, {
-	"Broadcom BCM5701 1000Base-SX"}, {
-	"Broadcom BCM5701 1000Base-T"}, {
-	"Broadcom BCM5701 1000Base-T"}, {
-	"Broadcom BCM5701"}, {
-	"Broadcom BCM5702 1000Base-T"}, {
-	"Broadcom BCM5703 1000Base-T"}, {
-	"Broadcom BCM5703 1000Base-SX"}, {
-	"3Com 3C996 10/100/1000 Server NIC"}, {
-	"3Com 3C996 10/100/1000 Server NIC"}, {
-	"3Com 3C996 Gigabit Fiber-SX Server NIC"}, {
-	"3Com 3C996 Gigabit Fiber-SX Server NIC"}, {
-	"3Com 3C996B Gigabit Server NIC"}, {
-	"3Com 3C997 Gigabit Server NIC"}, {
-	"3Com 3C997 Gigabit Fiber-SX Server NIC"}, {
-	"3Com 3C1000 Gigabit NIC"}, {
-	"3Com 3C940 Gigabit LOM (21X21)"}, {
-	"3Com 3C942 Gigabit LOM (31X31)"}, {
-	"Compaq NC6770 Gigabit Server Adapter"}, {
-	"Compaq NC7760 Gigabit Server Adapter"}, {
-	"Compaq NC7770 Gigabit Server Adapter"}, {
-	"Compaq NC7780 Gigabit Server Adapter"}, {
-0},};
-
-/* PCI Devices which use the 570x chipset */
-struct pci_device_table {
-	unsigned short vendor_id, device_id;	/* Vendor/DeviceID */
-	unsigned short subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
-	unsigned int class, class_mask;	/* (class,subclass,prog-if) triplet */
-	unsigned long board_id;	/* Data private to the driver */
-	int io_size, min_latency;
-} bcm570xDevices[] = {
-	{
-	0x14e4, 0x1644, 0x1014, 0x0277, 0, 0, BCM5700VIGIL, 128, 32}, {
-	0x14e4, 0x1644, 0x14e4, 0x1644, 0, 0, BCM5700A6, 128, 32}, {
-	0x14e4, 0x1644, 0x14e4, 0x2, 0, 0, BCM5700T6, 128, 32}, {
-	0x14e4, 0x1644, 0x14e4, 0x3, 0, 0, BCM5700A9, 128, 32}, {
-	0x14e4, 0x1644, 0x14e4, 0x4, 0, 0, BCM5700T9, 128, 32}, {
-	0x14e4, 0x1644, 0x1028, 0xd1, 0, 0, BCM5700, 128, 32}, {
-	0x14e4, 0x1644, 0x1028, 0x0106, 0, 0, BCM5700, 128, 32}, {
-	0x14e4, 0x1644, 0x1028, 0x0109, 0, 0, BCM5700, 128, 32}, {
-	0x14e4, 0x1644, 0x1028, 0x010a, 0, 0, BCM5700, 128, 32}, {
-	0x14e4, 0x1644, 0x10b7, 0x1000, 0, 0, TC996T, 128, 32}, {
-	0x14e4, 0x1644, 0x10b7, 0x1001, 0, 0, TC996ST, 128, 32}, {
-	0x14e4, 0x1644, 0x10b7, 0x1002, 0, 0, TC996SSX, 128, 32}, {
-	0x14e4, 0x1644, 0x10b7, 0x1003, 0, 0, TC997T, 128, 32}, {
-	0x14e4, 0x1644, 0x10b7, 0x1005, 0, 0, TC997SX, 128, 32}, {
-	0x14e4, 0x1644, 0x10b7, 0x1008, 0, 0, TC942BR01, 128, 32}, {
-	0x14e4, 0x1644, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5700, 128, 32}, {
-	0x14e4, 0x1645, 0x14e4, 1, 0, 0, BCM5701A5, 128, 32}, {
-	0x14e4, 0x1645, 0x14e4, 5, 0, 0, BCM5701T1, 128, 32}, {
-	0x14e4, 0x1645, 0x14e4, 6, 0, 0, BCM5701T8, 128, 32}, {
-	0x14e4, 0x1645, 0x14e4, 7, 0, 0, BCM5701A7, 128, 32}, {
-	0x14e4, 0x1645, 0x14e4, 8, 0, 0, BCM5701A10, 128, 32}, {
-	0x14e4, 0x1645, 0x14e4, 0x8008, 0, 0, BCM5701A12, 128, 32}, {
-	0x14e4, 0x1645, 0x0e11, 0xc1, 0, 0, NC6770, 128, 32}, {
-	0x14e4, 0x1645, 0x0e11, 0x7c, 0, 0, NC7770, 128, 32}, {
-	0x14e4, 0x1645, 0x0e11, 0x85, 0, 0, NC7780, 128, 32}, {
-	0x14e4, 0x1645, 0x1028, 0x0121, 0, 0, BCM5701, 128, 32}, {
-	0x14e4, 0x1645, 0x10b7, 0x1004, 0, 0, TC996SX, 128, 32}, {
-	0x14e4, 0x1645, 0x10b7, 0x1006, 0, 0, TC996BT, 128, 32}, {
-	0x14e4, 0x1645, 0x10b7, 0x1007, 0, 0, TC1000T, 128, 32}, {
-	0x14e4, 0x1645, 0x10b7, 0x1008, 0, 0, TC940BR01, 128, 32}, {
-	0x14e4, 0x1645, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5701, 128, 32}, {
-	0x14e4, 0x1646, 0x14e4, 0x8009, 0, 0, BCM5702, 128, 32}, {
-	0x14e4, 0x1646, 0x0e11, 0xbb, 0, 0, NC7760, 128, 32}, {
-	0x14e4, 0x1646, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702, 128, 32}, {
-	0x14e4, 0x16a6, 0x14e4, 0x8009, 0, 0, BCM5702, 128, 32}, {
-	0x14e4, 0x16a6, 0x0e11, 0xbb, 0, 0, NC7760, 128, 32}, {
-	0x14e4, 0x16a6, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5702, 128, 32}, {
-	0x14e4, 0x1647, 0x14e4, 0x0009, 0, 0, BCM5703, 128, 32}, {
-	0x14e4, 0x1647, 0x14e4, 0x000a, 0, 0, BCM5703A31, 128, 32}, {
-	0x14e4, 0x1647, 0x14e4, 0x000b, 0, 0, BCM5703, 128, 32}, {
-	0x14e4, 0x1647, 0x14e4, 0x800a, 0, 0, BCM5703, 128, 32}, {
-	0x14e4, 0x1647, 0x0e11, 0x9a, 0, 0, NC7770, 128, 32}, {
-	0x14e4, 0x1647, 0x0e11, 0x99, 0, 0, NC7780, 128, 32}, {
-	0x14e4, 0x1647, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703, 128, 32}, {
-	0x14e4, 0x16a7, 0x14e4, 0x0009, 0, 0, BCM5703, 128, 32}, {
-	0x14e4, 0x16a7, 0x14e4, 0x000a, 0, 0, BCM5703A31, 128, 32}, {
-	0x14e4, 0x16a7, 0x14e4, 0x000b, 0, 0, BCM5703, 128, 32}, {
-	0x14e4, 0x16a7, 0x14e4, 0x800a, 0, 0, BCM5703, 128, 32}, {
-	0x14e4, 0x16a7, 0x0e11, 0x9a, 0, 0, NC7770, 128, 32}, {
-	0x14e4, 0x16a7, 0x0e11, 0x99, 0, 0, NC7780, 128, 32}, {
-	0x14e4, 0x16a7, PCI_ANY_ID, PCI_ANY_ID, 0, 0, BCM5703, 128, 32}
-};
-
-#define n570xDevices   (sizeof(bcm570xDevices)/sizeof(bcm570xDevices[0]))
-
-/*
- * Allocate a packet buffer from the bcm570x packet pool.
- */
-void *bcm570xPktAlloc (int u, int pksize)
-{
-	return malloc (pksize);
-}
-
-/*
- * Free a packet previously allocated from the bcm570x packet
- * buffer pool.
- */
-void bcm570xPktFree (int u, void *p)
-{
-	free (p);
-}
-
-int bcm570xReplenishRxBuffers (PUM_DEVICE_BLOCK pUmDevice)
-{
-	PLM_PACKET pPacket;
-	PUM_PACKET pUmPacket;
-	void *skb;
-	int queue_rx = 0;
-	int ret = 0;
-
-	while ((pUmPacket = (PUM_PACKET)
-		QQ_PopHead (&pUmDevice->rx_out_of_buf_q.Container)) != 0) {
-
-		pPacket = (PLM_PACKET) pUmPacket;
-
-		/* reuse an old skb */
-		if (pUmPacket->skbuff) {
-			QQ_PushTail (&pDevice->RxPacketFreeQ.Container,
-				     pPacket);
-			queue_rx = 1;
-			continue;
-		}
-		if ((skb = bcm570xPktAlloc (pUmDevice->index,
-					    pPacket->u.Rx.RxBufferSize + 2)) ==
-		    0) {
-			QQ_PushHead (&pUmDevice->rx_out_of_buf_q.Container,
-				     pPacket);
-			printf ("NOTICE: Out of RX memory.\n");
-			ret = 1;
-			break;
-		}
-
-		pUmPacket->skbuff = skb;
-		QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
-		queue_rx = 1;
-	}
-
-	if (queue_rx) {
-		LM_QueueRxPackets (pDevice);
-	}
-
-	return ret;
-}
-
-/*
- * Probe, Map, and Init 570x device.
- */
-int eth_init (bd_t * bis)
-{
-	int i, rv, devFound = FALSE;
-	pci_dev_t devbusfn;
-	unsigned short status;
-
-	/* Find PCI device, if it exists, configure ...  */
-	for (i = 0; i < n570xDevices; i++) {
-		devbusfn = pci_find_device (bcm570xDevices[i].vendor_id,
-					    bcm570xDevices[i].device_id, 0);
-		if (devbusfn == -1) {
-			continue;	/* No device of that vendor/device ID */
-		} else {
-
-			/* Set ILINE */
-			pci_write_config_byte (devbusfn,
-					       PCI_INTERRUPT_LINE,
-					       BCM570X_ILINE);
-
-			/*
-			 * 0x10 - 0x14 define one 64-bit MBAR.
-			 * 0x14 is the higher-order address bits of the BAR.
-			 */
-			pci_write_config_dword (devbusfn,
-						PCI_BASE_ADDRESS_1, 0);
-
-			ioBase = BCM570X_MBAR;
-
-			pci_write_config_dword (devbusfn,
-						PCI_BASE_ADDRESS_0, ioBase);
-
-			/*
-			 * Enable PCI memory, IO, and Master -- don't
-			 * reset any status bits in doing so.
-			 */
-			pci_read_config_word (devbusfn, PCI_COMMAND, &status);
-
-			status |= PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER;
-
-			pci_write_config_word (devbusfn, PCI_COMMAND, status);
-
-			printf
-			    ("\n%s: bus %d, device %d, function %d: MBAR=0x%x\n",
-			     board_info[bcm570xDevices[i].board_id].name,
-			     PCI_BUS (devbusfn), PCI_DEV (devbusfn),
-			     PCI_FUNC (devbusfn), ioBase);
-
-			/* Allocate once, but always clear on init */
-			if (!pDevice) {
-				pDevice = malloc (sizeof (UM_DEVICE_BLOCK));
-				pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-				memset (pDevice, 0x0, sizeof (UM_DEVICE_BLOCK));
-			}
-
-			/* Configure pci dev structure */
-			pUmDevice->pdev = devbusfn;
-			pUmDevice->index = 0;
-			pUmDevice->tx_pkt = 0;
-			pUmDevice->rx_pkt = 0;
-			devFound = TRUE;
-			break;
-		}
-	}
-
-	if (!devFound) {
-		printf
-		    ("eth_init: FAILURE: no BCM570x Ethernet devices found.\n");
-		return -1;
-	}
-
-	/* Setup defaults for chip */
-	pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
-
-	if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0) {
-		pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
-	} else {
-
-		if (rx_checksum[i]) {
-			pDevice->TaskToOffload |=
-			    LM_TASK_OFFLOAD_RX_TCP_CHECKSUM |
-			    LM_TASK_OFFLOAD_RX_UDP_CHECKSUM;
-		}
-
-		if (tx_checksum[i]) {
-			pDevice->TaskToOffload |=
-			    LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
-			    LM_TASK_OFFLOAD_TX_UDP_CHECKSUM;
-			pDevice->NoTxPseudoHdrChksum = TRUE;
-		}
-	}
-
-	/* Set Device PCI Memory base address */
-	pDevice->pMappedMemBase = (PLM_UINT8) ioBase;
-
-	/* Pull down adapter info */
-	if ((rv = LM_GetAdapterInfo (pDevice)) != LM_STATUS_SUCCESS) {
-		printf ("bcm570xEnd: LM_GetAdapterInfo failed: rv=%d!\n", rv);
-		return -2;
-	}
-
-	/* Lock not needed */
-	pUmDevice->do_global_lock = 0;
-
-	if (T3_ASIC_REV (pUmDevice->lm_dev.ChipRevId) == T3_ASIC_REV_5700) {
-		/* The 5700 chip works best without interleaved register */
-		/* accesses on certain machines. */
-		pUmDevice->do_global_lock = 1;
-	}
-
-	/* Setup timer delays */
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-		pDevice->UseTaggedStatus = TRUE;
-		pUmDevice->timer_interval = CONFIG_SYS_HZ;
-	} else {
-		pUmDevice->timer_interval = CONFIG_SYS_HZ / 50;
-	}
-
-	/* Grab name .... */
-	pUmDevice->name =
-	    (char *)malloc (strlen (board_info[bcm570xDevices[i].board_id].name)
-			    + 1);
-	strcpy (pUmDevice->name, board_info[bcm570xDevices[i].board_id].name);
-
-	eth_getenv_enetaddr("ethaddr", pDevice->NodeAddress);
-	LM_SetMacAddress (pDevice);
-	/* Init queues  .. */
-	QQ_InitQueue (&pUmDevice->rx_out_of_buf_q.Container,
-		      MAX_RX_PACKET_DESC_COUNT);
-	pUmDevice->rx_last_cnt = pUmDevice->tx_last_cnt = 0;
-
-	/* delay for 4 seconds */
-	pUmDevice->delayed_link_ind = (4 * CONFIG_SYS_HZ) / pUmDevice->timer_interval;
-
-	pUmDevice->adaptive_expiry = CONFIG_SYS_HZ / pUmDevice->timer_interval;
-
-	/* Sometimes we get spurious ints. after reset when link is down. */
-	/* This field tells the isr to service the int. even if there is */
-	/* no status block update. */
-	pUmDevice->adapter_just_inited =
-	    (3 * CONFIG_SYS_HZ) / pUmDevice->timer_interval;
-
-	/* Initialize 570x */
-	if (LM_InitializeAdapter (pDevice) != LM_STATUS_SUCCESS) {
-		printf ("ERROR: Adapter initialization failed.\n");
-		return ERROR;
-	}
-
-	/* Enable chip ISR */
-	LM_EnableInterrupt (pDevice);
-
-	/* Clear MC table */
-	LM_MulticastClear (pDevice);
-
-	/* Enable Multicast */
-	LM_SetReceiveMask (pDevice,
-			   pDevice->ReceiveMask | LM_ACCEPT_ALL_MULTICAST);
-
-	pUmDevice->opened = 1;
-	pUmDevice->tx_full = 0;
-	pUmDevice->tx_pkt = 0;
-	pUmDevice->rx_pkt = 0;
-	printf ("eth%d: %s @0x%lx,",
-		pDevice->index, pUmDevice->name, (unsigned long)ioBase);
-	printf ("node addr ");
-	for (i = 0; i < 6; i++) {
-		printf ("%2.2x", pDevice->NodeAddress[i]);
-	}
-	printf ("\n");
-
-	printf ("eth%d: ", pDevice->index);
-	printf ("%s with ", chip_rev[bcm570xDevices[i].board_id].name);
-
-	if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5400_PHY_ID)
-		printf ("Broadcom BCM5400 Copper ");
-	else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID)
-		printf ("Broadcom BCM5401 Copper ");
-	else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5411_PHY_ID)
-		printf ("Broadcom BCM5411 Copper ");
-	else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5701_PHY_ID)
-		printf ("Broadcom BCM5701 Integrated Copper ");
-	else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5703_PHY_ID)
-		printf ("Broadcom BCM5703 Integrated Copper ");
-	else if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM8002_PHY_ID)
-		printf ("Broadcom BCM8002 SerDes ");
-	else if (pDevice->EnableTbi)
-		printf ("Agilent HDMP-1636 SerDes ");
-	else
-		printf ("Unknown ");
-	printf ("transceiver found\n");
-
-	printf ("eth%d: %s, MTU: %d,",
-		pDevice->index, pDevice->BusSpeedStr, 1500);
-
-	if ((pDevice->ChipRevId != T3_CHIP_ID_5700_B0) && rx_checksum[i])
-		printf ("Rx Checksum ON\n");
-	else
-		printf ("Rx Checksum OFF\n");
-	initialized++;
-
-	return 0;
-}
-
-/* Ethernet Interrupt service routine */
-void eth_isr (void)
-{
-	LM_UINT32 oldtag, newtag;
-	int i;
-
-	pUmDevice->interrupt = 1;
-
-	if (pDevice->UseTaggedStatus) {
-		if ((pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) ||
-		    pUmDevice->adapter_just_inited) {
-			MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 1);
-			oldtag = pDevice->pStatusBlkVirt->StatusTag;
-
-			for (i = 0;; i++) {
-				pDevice->pStatusBlkVirt->Status &=
-				    ~STATUS_BLOCK_UPDATED;
-				LM_ServiceInterrupts (pDevice);
-				newtag = pDevice->pStatusBlkVirt->StatusTag;
-				if ((newtag == oldtag) || (i > 50)) {
-					MB_REG_WR (pDevice,
-						   Mailbox.Interrupt[0].Low,
-						   newtag << 24);
-					if (pDevice->UndiFix) {
-						REG_WR (pDevice, Grc.LocalCtrl,
-							pDevice->
-							GrcLocalCtrl | 0x2);
-					}
-					break;
-				}
-				oldtag = newtag;
-			}
-		}
-	} else {
-		while (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) {
-			unsigned int dummy;
-
-			pDevice->pMemView->Mailbox.Interrupt[0].Low = 1;
-			pDevice->pStatusBlkVirt->Status &=
-			    ~STATUS_BLOCK_UPDATED;
-			LM_ServiceInterrupts (pDevice);
-			pDevice->pMemView->Mailbox.Interrupt[0].Low = 0;
-			dummy = pDevice->pMemView->Mailbox.Interrupt[0].Low;
-		}
-	}
-
-	/* Allocate new RX buffers */
-	if (QQ_GetEntryCnt (&pUmDevice->rx_out_of_buf_q.Container)) {
-		bcm570xReplenishRxBuffers (pUmDevice);
-	}
-
-	/* Queue packets */
-	if (QQ_GetEntryCnt (&pDevice->RxPacketFreeQ.Container)) {
-		LM_QueueRxPackets (pDevice);
-	}
-
-	if (pUmDevice->tx_queued) {
-		pUmDevice->tx_queued = 0;
-	}
-
-	if (pUmDevice->tx_full) {
-		if (pDevice->LinkStatus != LM_STATUS_LINK_DOWN) {
-			printf
-			    ("NOTICE: tx was previously blocked, restarting MUX\n");
-			pUmDevice->tx_full = 0;
-		}
-	}
-
-	pUmDevice->interrupt = 0;
-
-}
-
-int eth_send (volatile void *packet, int length)
-{
-	int status = 0;
-#if ET_DEBUG
-	unsigned char *ptr = (unsigned char *)packet;
-#endif
-	PLM_PACKET pPacket;
-	PUM_PACKET pUmPacket;
-
-	/* Link down, return */
-	while (pDevice->LinkStatus == LM_STATUS_LINK_DOWN) {
-#if 0
-		printf ("eth%d: link down - check cable or link partner.\n",
-			pUmDevice->index);
-#endif
-		eth_isr ();
-
-		/* Wait to see link for one-half a second before sending ... */
-		udelay (1500000);
-
-	}
-
-	/* Clear sent flag */
-	pUmDevice->tx_pkt = 0;
-
-	/* Previously blocked */
-	if (pUmDevice->tx_full) {
-		printf ("eth%d: tx blocked.\n", pUmDevice->index);
-		return 0;
-	}
-
-	pPacket = (PLM_PACKET)
-	    QQ_PopHead (&pDevice->TxPacketFreeQ.Container);
-
-	if (pPacket == 0) {
-		pUmDevice->tx_full = 1;
-		printf ("bcm570xEndSend: TX full!\n");
-		return 0;
-	}
-
-	if (pDevice->SendBdLeft.counter == 0) {
-		pUmDevice->tx_full = 1;
-		printf ("bcm570xEndSend: no more TX descriptors!\n");
-		QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket);
-		return 0;
-	}
-
-	if (length <= 0) {
-		printf ("eth: bad packet size: %d\n", length);
-		goto out;
-	}
-
-	/* Get packet buffers and fragment list */
-	pUmPacket = (PUM_PACKET) pPacket;
-	/* Single DMA Descriptor transmit.
-	 * Fragments may be provided, but one DMA descriptor max is
-	 * used to send the packet.
-	 */
-	if (MM_CoalesceTxBuffer (pDevice, pPacket) != LM_STATUS_SUCCESS) {
-		if (pUmPacket->skbuff == NULL) {
-			/* Packet was discarded */
-			printf ("TX: failed (1)\n");
-			status = 1;
-		} else {
-			printf ("TX: failed (2)\n");
-			status = 2;
-		}
-		QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket);
-		return status;
-	}
-
-	/* Copy packet to DMA buffer */
-	memset (pUmPacket->skbuff, 0x0, MAX_PACKET_SIZE);
-	memcpy ((void *)pUmPacket->skbuff, (void *)packet, length);
-	pPacket->PacketSize = length;
-	pPacket->Flags |= SND_BD_FLAG_END | SND_BD_FLAG_COAL_NOW;
-	pPacket->u.Tx.FragCount = 1;
-	/* We've already provided a frame ready for transmission */
-	pPacket->Flags &= ~SND_BD_FLAG_TCP_UDP_CKSUM;
-
-	if (LM_SendPacket (pDevice, pPacket) == LM_STATUS_FAILURE) {
-		/*
-		 *  A lower level send failure will push the packet descriptor back
-		 *  in the free queue, so just deal with the VxWorks clusters.
-		 */
-		if (pUmPacket->skbuff == NULL) {
-			printf ("TX failed (1)!\n");
-			/* Packet was discarded */
-			status = 3;
-		} else {
-			/* A resource problem ... */
-			printf ("TX failed (2)!\n");
-			status = 4;
-		}
-
-		if (QQ_GetEntryCnt (&pDevice->TxPacketFreeQ.Container) == 0) {
-			printf ("TX: emptyQ!\n");
-			pUmDevice->tx_full = 1;
-		}
-	}
-
-	while (pUmDevice->tx_pkt == 0) {
-		/* Service TX */
-		eth_isr ();
-	}
-#if ET_DEBUG
-	printf ("eth_send: 0x%x, %d bytes\n"
-		"[%x %x %x %x %x %x %x %x %x %x %x %x %x %x %x %x] ...\n",
-		(int)pPacket, length,
-		ptr[0], ptr[1], ptr[2], ptr[3], ptr[4], ptr[5],
-		ptr[6], ptr[7], ptr[8], ptr[9], ptr[10], ptr[11], ptr[12],
-		ptr[13], ptr[14], ptr[15]);
-#endif
-	pUmDevice->tx_pkt = 0;
-	QQ_PushHead (&pDevice->TxPacketFreeQ.Container, pPacket);
-
-	/* Done with send */
-      out:
-	return status;
-}
-
-/* Ethernet receive */
-int eth_rx (void)
-{
-	PLM_PACKET pPacket = NULL;
-	PUM_PACKET pUmPacket = NULL;
-	void *skb;
-	int size = 0;
-
-	while (TRUE) {
-
-	      bcm570x_service_isr:
-		/* Pull down packet if it is there */
-		eth_isr ();
-
-		/* Indicate RX packets called */
-		if (pUmDevice->rx_pkt) {
-			/* printf("eth_rx: got a packet...\n"); */
-			pUmDevice->rx_pkt = 0;
-		} else {
-			/* printf("eth_rx: waiting for packet...\n"); */
-			goto bcm570x_service_isr;
-		}
-
-		pPacket = (PLM_PACKET)
-		    QQ_PopHead (&pDevice->RxPacketReceivedQ.Container);
-
-		if (pPacket == 0) {
-			printf ("eth_rx: empty packet!\n");
-			goto bcm570x_service_isr;
-		}
-
-		pUmPacket = (PUM_PACKET) pPacket;
-#if ET_DEBUG
-		printf ("eth_rx: packet @0x%x\n", (int)pPacket);
-#endif
-		/* If the packet generated an error, reuse buffer */
-		if ((pPacket->PacketStatus != LM_STATUS_SUCCESS) ||
-		    ((size = pPacket->PacketSize) > pDevice->RxMtu)) {
-
-			/* reuse skb */
-			QQ_PushTail (&pDevice->RxPacketFreeQ.Container,
-				     pPacket);
-			printf ("eth_rx: error in packet dma!\n");
-			goto bcm570x_service_isr;
-		}
-
-		/* Set size and address */
-		skb = pUmPacket->skbuff;
-		size = pPacket->PacketSize;
-
-		/* Pass the packet up to the protocol
-		 * layers.
-		 */
-		NetReceive (skb, size);
-
-		/* Free packet buffer */
-		bcm570xPktFree (pUmDevice->index, skb);
-		pUmPacket->skbuff = NULL;
-
-		/* Reuse SKB */
-		QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
-
-		return 0;	/* Got a packet, bail ... */
-	}
-	return size;
-}
-
-/* Shut down device */
-void eth_halt (void)
-{
-	int i;
-	if (initialized)
-		if (pDevice && pUmDevice && pUmDevice->opened) {
-			printf ("\neth%d:%s,", pUmDevice->index,
-				pUmDevice->name);
-			printf ("HALT,");
-			/* stop device */
-			LM_Halt (pDevice);
-			printf ("POWER DOWN,");
-			LM_SetPowerState (pDevice, LM_POWER_STATE_D3);
-
-			/* Free the memory allocated by the device in tigon3 */
-			for (i = 0; i < pUmDevice->mem_list_num; i++) {
-				if (pUmDevice->mem_list[i]) {
-					/* sanity check */
-					if (pUmDevice->dma_list[i]) {	/* cache-safe memory */
-						free (pUmDevice->mem_list[i]);
-					} else {
-						free (pUmDevice->mem_list[i]);	/* normal memory   */
-					}
-				}
-			}
-			pUmDevice->opened = 0;
-			free (pDevice);
-			pDevice = NULL;
-			pUmDevice = NULL;
-			initialized = 0;
-			printf ("done - offline.\n");
-		}
-}
-
-/*
- *
- * Middle Module: Interface between the HW driver (tigon3 modules) and
- * the native (SENS) driver.  These routines implement the system
- * interface for tigon3 on VxWorks.
- */
-
-/* Middle module dependency - size of a packet descriptor */
-int MM_Packet_Desc_Size = sizeof (UM_PACKET);
-
-LM_STATUS
-MM_ReadConfig32 (PLM_DEVICE_BLOCK pDevice,
-		 LM_UINT32 Offset, LM_UINT32 * pValue32)
-{
-	UM_DEVICE_BLOCK *pUmDevice;
-	pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
-	pci_read_config_dword (pUmDevice->pdev, Offset, (u32 *) pValue32);
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_WriteConfig32 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT32 Value32)
-{
-	UM_DEVICE_BLOCK *pUmDevice;
-	pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
-	pci_write_config_dword (pUmDevice->pdev, Offset, Value32);
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_ReadConfig16 (PLM_DEVICE_BLOCK pDevice,
-		 LM_UINT32 Offset, LM_UINT16 * pValue16)
-{
-	UM_DEVICE_BLOCK *pUmDevice;
-	pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
-	pci_read_config_word (pUmDevice->pdev, Offset, (u16 *) pValue16);
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_WriteConfig16 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT16 Value16)
-{
-	UM_DEVICE_BLOCK *pUmDevice;
-	pUmDevice = (UM_DEVICE_BLOCK *) pDevice;
-	pci_write_config_word (pUmDevice->pdev, Offset, Value16);
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_AllocateSharedMemory (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
-			 PLM_VOID * pMemoryBlockVirt,
-			 PLM_PHYSICAL_ADDRESS pMemoryBlockPhy, LM_BOOL Cached)
-{
-	PLM_VOID pvirt;
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-	dma_addr_t mapping;
-
-	pvirt = malloc (BlockSize);
-	mapping = (dma_addr_t) (pvirt);
-	if (!pvirt)
-		return LM_STATUS_FAILURE;
-
-	pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt;
-	pUmDevice->dma_list[pUmDevice->mem_list_num] = mapping;
-	pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize;
-	memset (pvirt, 0, BlockSize);
-
-	*pMemoryBlockVirt = (PLM_VOID) pvirt;
-	MM_SetAddr (pMemoryBlockPhy, (dma_addr_t) mapping);
-
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS
-MM_AllocateMemory (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
-		   PLM_VOID * pMemoryBlockVirt)
-{
-	PLM_VOID pvirt;
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-
-	pvirt = malloc (BlockSize);
-
-	if (!pvirt)
-		return LM_STATUS_FAILURE;
-
-	pUmDevice->mem_list[pUmDevice->mem_list_num] = pvirt;
-	pUmDevice->dma_list[pUmDevice->mem_list_num] = 0;
-	pUmDevice->mem_size_list[pUmDevice->mem_list_num++] = BlockSize;
-	memset (pvirt, 0, BlockSize);
-	*pMemoryBlockVirt = pvirt;
-
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS MM_MapMemBase (PLM_DEVICE_BLOCK pDevice)
-{
-	printf ("BCM570x PCI Memory base address @0x%x\n",
-		(unsigned int)pDevice->pMappedMemBase);
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS MM_InitializeUmPackets (PLM_DEVICE_BLOCK pDevice)
-{
-	int i;
-	void *skb;
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-	PUM_PACKET pUmPacket = NULL;
-	PLM_PACKET pPacket = NULL;
-
-	for (i = 0; i < pDevice->RxPacketDescCnt; i++) {
-		pPacket = QQ_PopHead (&pDevice->RxPacketFreeQ.Container);
-		pUmPacket = (PUM_PACKET) pPacket;
-
-		if (pPacket == 0) {
-			printf ("MM_InitializeUmPackets: Bad RxPacketFreeQ\n");
-		}
-
-		skb = bcm570xPktAlloc (pUmDevice->index,
-				       pPacket->u.Rx.RxBufferSize + 2);
-
-		if (skb == 0) {
-			pUmPacket->skbuff = 0;
-			QQ_PushTail (&pUmDevice->rx_out_of_buf_q.Container,
-				     pPacket);
-			printf ("MM_InitializeUmPackets: out of buffer.\n");
-			continue;
-		}
-
-		pUmPacket->skbuff = skb;
-		QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
-	}
-
-	pUmDevice->rx_low_buf_thresh = pDevice->RxPacketDescCnt / 8;
-
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS MM_GetConfig (PLM_DEVICE_BLOCK pDevice)
-{
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-	int index = pDevice->index;
-
-	if (auto_speed[index] == 0)
-		pDevice->DisableAutoNeg = TRUE;
-	else
-		pDevice->DisableAutoNeg = FALSE;
-
-	if (line_speed[index] == 0) {
-		pDevice->RequestedMediaType = LM_REQUESTED_MEDIA_TYPE_AUTO;
-		pDevice->DisableAutoNeg = FALSE;
-	} else {
-		if (line_speed[index] == 1000) {
-			if (pDevice->EnableTbi) {
-				pDevice->RequestedMediaType =
-				    LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX;
-			} else if (full_duplex[index]) {
-				pDevice->RequestedMediaType =
-				    LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX;
-			} else {
-				pDevice->RequestedMediaType =
-				    LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS;
-			}
-			if (!pDevice->EnableTbi)
-				pDevice->DisableAutoNeg = FALSE;
-		} else if (line_speed[index] == 100) {
-			if (full_duplex[index]) {
-				pDevice->RequestedMediaType =
-				    LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX;
-			} else {
-				pDevice->RequestedMediaType =
-				    LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS;
-			}
-		} else if (line_speed[index] == 10) {
-			if (full_duplex[index]) {
-				pDevice->RequestedMediaType =
-				    LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX;
-			} else {
-				pDevice->RequestedMediaType =
-				    LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS;
-			}
-		} else {
-			pDevice->RequestedMediaType =
-			    LM_REQUESTED_MEDIA_TYPE_AUTO;
-			pDevice->DisableAutoNeg = FALSE;
-		}
-
-	}
-	pDevice->FlowControlCap = 0;
-	if (rx_flow_control[index] != 0) {
-		pDevice->FlowControlCap |= LM_FLOW_CONTROL_RECEIVE_PAUSE;
-	}
-	if (tx_flow_control[index] != 0) {
-		pDevice->FlowControlCap |= LM_FLOW_CONTROL_TRANSMIT_PAUSE;
-	}
-	if ((auto_flow_control[index] != 0) &&
-	    (pDevice->DisableAutoNeg == FALSE)) {
-
-		pDevice->FlowControlCap |= LM_FLOW_CONTROL_AUTO_PAUSE;
-		if ((tx_flow_control[index] == 0) &&
-		    (rx_flow_control[index] == 0)) {
-			pDevice->FlowControlCap |=
-			    LM_FLOW_CONTROL_TRANSMIT_PAUSE |
-			    LM_FLOW_CONTROL_RECEIVE_PAUSE;
-		}
-	}
-
-	/* Default MTU for now */
-	pUmDevice->mtu = 1500;
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	if (pUmDevice->mtu > 1500) {
-		pDevice->RxMtu = pUmDevice->mtu;
-		pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT;
-	} else {
-		pDevice->RxJumboDescCnt = 0;
-	}
-	pDevice->RxJumboDescCnt = rx_jumbo_desc_cnt[index];
-#else
-	pDevice->RxMtu = pUmDevice->mtu;
-#endif
-
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-		pDevice->UseTaggedStatus = TRUE;
-		pUmDevice->timer_interval = CONFIG_SYS_HZ;
-	} else {
-		pUmDevice->timer_interval = CONFIG_SYS_HZ / 50;
-	}
-
-	pDevice->TxPacketDescCnt = tx_pkt_desc_cnt[index];
-	pDevice->RxStdDescCnt = rx_std_desc_cnt[index];
-	/* Note:  adaptive coalescence really isn't adaptive in this driver */
-	pUmDevice->rx_adaptive_coalesce = rx_adaptive_coalesce[index];
-	if (!pUmDevice->rx_adaptive_coalesce) {
-		pDevice->RxCoalescingTicks = rx_coalesce_ticks[index];
-		if (pDevice->RxCoalescingTicks > MAX_RX_COALESCING_TICKS)
-			pDevice->RxCoalescingTicks = MAX_RX_COALESCING_TICKS;
-		pUmDevice->rx_curr_coalesce_ticks = pDevice->RxCoalescingTicks;
-
-		pDevice->RxMaxCoalescedFrames = rx_max_coalesce_frames[index];
-		if (pDevice->RxMaxCoalescedFrames > MAX_RX_MAX_COALESCED_FRAMES)
-			pDevice->RxMaxCoalescedFrames =
-			    MAX_RX_MAX_COALESCED_FRAMES;
-		pUmDevice->rx_curr_coalesce_frames =
-		    pDevice->RxMaxCoalescedFrames;
-		pDevice->StatsCoalescingTicks = stats_coalesce_ticks[index];
-		if (pDevice->StatsCoalescingTicks > MAX_STATS_COALESCING_TICKS)
-			pDevice->StatsCoalescingTicks =
-			    MAX_STATS_COALESCING_TICKS;
-	} else {
-		pUmDevice->rx_curr_coalesce_frames =
-		    DEFAULT_RX_MAX_COALESCED_FRAMES;
-		pUmDevice->rx_curr_coalesce_ticks = DEFAULT_RX_COALESCING_TICKS;
-	}
-	pDevice->TxCoalescingTicks = tx_coalesce_ticks[index];
-	if (pDevice->TxCoalescingTicks > MAX_TX_COALESCING_TICKS)
-		pDevice->TxCoalescingTicks = MAX_TX_COALESCING_TICKS;
-	pDevice->TxMaxCoalescedFrames = tx_max_coalesce_frames[index];
-	if (pDevice->TxMaxCoalescedFrames > MAX_TX_MAX_COALESCED_FRAMES)
-		pDevice->TxMaxCoalescedFrames = MAX_TX_MAX_COALESCED_FRAMES;
-
-	if (enable_wol[index]) {
-		pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_MAGIC_PACKET;
-		pDevice->WakeUpMode = LM_WAKE_UP_MODE_MAGIC_PACKET;
-	}
-	pDevice->NicSendBd = TRUE;
-
-	/* Don't update status blocks during interrupt */
-	pDevice->RxCoalescingTicksDuringInt = 0;
-	pDevice->TxCoalescingTicksDuringInt = 0;
-
-	return LM_STATUS_SUCCESS;
-
-}
-
-LM_STATUS MM_StartTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
-{
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-	printf ("Start TX DMA: dev=%d packet @0x%x\n",
-		(int)pUmDevice->index, (unsigned int)pPacket);
-
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS MM_CompleteTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
-{
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-	printf ("Complete TX DMA: dev=%d packet @0x%x\n",
-		(int)pUmDevice->index, (unsigned int)pPacket);
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS MM_IndicateStatus (PLM_DEVICE_BLOCK pDevice, LM_STATUS Status)
-{
-	char buf[128];
-	char lcd[4];
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-	LM_FLOW_CONTROL flow_control;
-
-	pUmDevice->delayed_link_ind = 0;
-	memset (lcd, 0x0, 4);
-
-	if (Status == LM_STATUS_LINK_DOWN) {
-		sprintf (buf, "eth%d: %s: NIC Link is down\n",
-			 pUmDevice->index, pUmDevice->name);
-		lcd[0] = 'L';
-		lcd[1] = 'N';
-		lcd[2] = 'K';
-		lcd[3] = '?';
-	} else if (Status == LM_STATUS_LINK_ACTIVE) {
-		sprintf (buf, "eth%d:%s: ", pUmDevice->index, pUmDevice->name);
-
-		if (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) {
-			strcat (buf, "1000 Mbps ");
-			lcd[0] = '1';
-			lcd[1] = 'G';
-			lcd[2] = 'B';
-		} else if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS) {
-			strcat (buf, "100 Mbps ");
-			lcd[0] = '1';
-			lcd[1] = '0';
-			lcd[2] = '0';
-		} else if (pDevice->LineSpeed == LM_LINE_SPEED_10MBPS) {
-			strcat (buf, "10 Mbps ");
-			lcd[0] = '1';
-			lcd[1] = '0';
-			lcd[2] = ' ';
-		}
-		if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL) {
-			strcat (buf, "full duplex");
-			lcd[3] = 'F';
-		} else {
-			strcat (buf, "half duplex");
-			lcd[3] = 'H';
-		}
-		strcat (buf, " link up");
-
-		flow_control = pDevice->FlowControl &
-		    (LM_FLOW_CONTROL_RECEIVE_PAUSE |
-		     LM_FLOW_CONTROL_TRANSMIT_PAUSE);
-
-		if (flow_control) {
-			if (flow_control & LM_FLOW_CONTROL_RECEIVE_PAUSE) {
-				strcat (buf, ", receive ");
-				if (flow_control &
-				    LM_FLOW_CONTROL_TRANSMIT_PAUSE)
-					strcat (buf, " & transmit ");
-			} else {
-				strcat (buf, ", transmit ");
-			}
-			strcat (buf, "flow control ON");
-		} else {
-			strcat (buf, ", flow control OFF");
-		}
-		strcat (buf, "\n");
-		printf ("%s", buf);
-	}
-#if 0
-	sysLedDsply (lcd[0], lcd[1], lcd[2], lcd[3]);
-#endif
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS MM_FreeRxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
-{
-
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-	PUM_PACKET pUmPacket;
-	void *skb;
-
-	pUmPacket = (PUM_PACKET) pPacket;
-
-	if ((skb = pUmPacket->skbuff))
-		bcm570xPktFree (pUmDevice->index, skb);
-
-	pUmPacket->skbuff = 0;
-
-	return LM_STATUS_SUCCESS;
-}
-
-unsigned long MM_AnGetCurrentTime_us (PAN_STATE_INFO pAnInfo)
-{
-	return get_timer (0);
-}
-
-/*
- *   Transform an MBUF chain into a single MBUF.
- *   This routine will fail if the amount of data in the
- *   chain overflows a transmit buffer.  In that case,
- *   the incoming MBUF chain will be freed.  This routine can
- *   also fail by not being able to allocate a new MBUF (including
- *   cluster and mbuf headers).  In that case the failure is
- *   non-fatal.  The incoming cluster chain is not freed, giving
- *   the caller the choice of whether to try a retransmit later.
- */
-LM_STATUS MM_CoalesceTxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
-{
-	PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-	void *skbnew;
-	int len = 0;
-
-	if (len == 0)
-		return (LM_STATUS_SUCCESS);
-
-	if (len > MAX_PACKET_SIZE) {
-		printf ("eth%d: xmit frame discarded, too big!, size = %d\n",
-			pUmDevice->index, len);
-		return (LM_STATUS_FAILURE);
-	}
-
-	skbnew = bcm570xPktAlloc (pUmDevice->index, MAX_PACKET_SIZE);
-
-	if (skbnew == NULL) {
-		pUmDevice->tx_full = 1;
-		printf ("eth%d: out of transmit buffers", pUmDevice->index);
-		return (LM_STATUS_FAILURE);
-	}
-
-	/* New packet values */
-	pUmPacket->skbuff = skbnew;
-	pUmPacket->lm_packet.u.Tx.FragCount = 1;
-
-	return (LM_STATUS_SUCCESS);
-}
-
-LM_STATUS MM_IndicateRxPackets (PLM_DEVICE_BLOCK pDevice)
-{
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-	pUmDevice->rx_pkt = 1;
-	return LM_STATUS_SUCCESS;
-}
-
-LM_STATUS MM_IndicateTxPackets (PLM_DEVICE_BLOCK pDevice)
-{
-	PUM_DEVICE_BLOCK pUmDevice = (PUM_DEVICE_BLOCK) pDevice;
-	PLM_PACKET pPacket;
-	PUM_PACKET pUmPacket;
-	void *skb;
-	while (TRUE) {
-
-		pPacket = (PLM_PACKET)
-		    QQ_PopHead (&pDevice->TxPacketXmittedQ.Container);
-
-		if (pPacket == 0)
-			break;
-
-		pUmPacket = (PUM_PACKET) pPacket;
-		skb = (void *)pUmPacket->skbuff;
-
-		/*
-		 * Free MBLK if we transmitted a fragmented packet or a
-		 * non-fragmented packet straight from the VxWorks
-		 * buffer pool. If packet was copied to a local transmit
-		 * buffer, then there's no MBUF to free, just free
-		 * the transmit buffer back to the cluster pool.
-		 */
-
-		if (skb)
-			bcm570xPktFree (pUmDevice->index, skb);
-
-		pUmPacket->skbuff = 0;
-		QQ_PushTail (&pDevice->TxPacketFreeQ.Container, pPacket);
-		pUmDevice->tx_pkt = 1;
-	}
-	if (pUmDevice->tx_full) {
-		if (QQ_GetEntryCnt (&pDevice->TxPacketFreeQ.Container) >=
-		    (QQ_GetSize (&pDevice->TxPacketFreeQ.Container) >> 1))
-			pUmDevice->tx_full = 0;
-	}
-	return LM_STATUS_SUCCESS;
-}
-
-/*
- *  Scan an MBUF chain until we reach fragment number "frag"
- *  Return its length and physical address.
- */
-void MM_MapTxDma
-    (PLM_DEVICE_BLOCK pDevice,
-     struct _LM_PACKET *pPacket,
-     T3_64BIT_HOST_ADDR * paddr, LM_UINT32 * len, int frag) {
-	PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
-	*len = pPacket->PacketSize;
-	MM_SetT3Addr (paddr, (dma_addr_t) pUmPacket->skbuff);
-}
-
-/*
- *  Convert an mbuf address, a CPU local virtual address,
- *  to a physical address as seen from a PCI device.  Store the
- *  result at paddr.
- */
-void MM_MapRxDma (PLM_DEVICE_BLOCK pDevice,
-		  struct _LM_PACKET *pPacket, T3_64BIT_HOST_ADDR * paddr)
-{
-	PUM_PACKET pUmPacket = (PUM_PACKET) pPacket;
-	MM_SetT3Addr (paddr, (dma_addr_t) pUmPacket->skbuff);
-}
-
-void MM_SetAddr (LM_PHYSICAL_ADDRESS * paddr, dma_addr_t addr)
-{
-#if (BITS_PER_LONG == 64)
-	paddr->High = ((unsigned long)addr) >> 32;
-	paddr->Low = ((unsigned long)addr) & 0xffffffff;
-#else
-	paddr->High = 0;
-	paddr->Low = (unsigned long)addr;
-#endif
-}
-
-void MM_SetT3Addr (T3_64BIT_HOST_ADDR * paddr, dma_addr_t addr)
-{
-	unsigned long baddr = (unsigned long)addr;
-#if (BITS_PER_LONG == 64)
-	set_64bit_addr (paddr, baddr & 0xffffffff, baddr >> 32);
-#else
-	set_64bit_addr (paddr, baddr, 0);
-#endif
-}
-
-/*
- * This combination of `inline' and `extern' has almost the effect of a
- * macro.  The way to use it is to put a function definition in a header
- * file with these keywords, and put another copy of the definition
- * (lacking `inline' and `extern') in a library file.  The definition in
- * the header file will cause most calls to the function to be inlined.
- * If any uses of the function remain, they will refer to the single copy
- * in the library.
- */
-void atomic_set (atomic_t * entry, int val)
-{
-	entry->counter = val;
-}
-
-int atomic_read (atomic_t * entry)
-{
-	return entry->counter;
-}
-
-void atomic_inc (atomic_t * entry)
-{
-	if (entry)
-		entry->counter++;
-}
-
-void atomic_dec (atomic_t * entry)
-{
-	if (entry)
-		entry->counter--;
-}
-
-void atomic_sub (int a, atomic_t * entry)
-{
-	if (entry)
-		entry->counter -= a;
-}
-
-void atomic_add (int a, atomic_t * entry)
-{
-	if (entry)
-		entry->counter += a;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-void QQ_InitQueue (PQQ_CONTAINER pQueue, unsigned int QueueSize)
-{
-	pQueue->Head = 0;
-	pQueue->Tail = 0;
-	pQueue->Size = QueueSize + 1;
-	atomic_set (&pQueue->EntryCnt, 0);
-}				/* QQ_InitQueue */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-char QQ_Full (PQQ_CONTAINER pQueue)
-{
-	unsigned int NewHead;
-
-	NewHead = (pQueue->Head + 1) % pQueue->Size;
-
-	return (NewHead == pQueue->Tail);
-}				/* QQ_Full */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-char QQ_Empty (PQQ_CONTAINER pQueue)
-{
-	return (pQueue->Head == pQueue->Tail);
-}				/* QQ_Empty */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-unsigned int QQ_GetSize (PQQ_CONTAINER pQueue)
-{
-	return pQueue->Size;
-}				/* QQ_GetSize */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-unsigned int QQ_GetEntryCnt (PQQ_CONTAINER pQueue)
-{
-	return atomic_read (&pQueue->EntryCnt);
-}				/* QQ_GetEntryCnt */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/*    TRUE entry was added successfully.                                      */
-/*    FALSE queue is full.                                                    */
-/******************************************************************************/
-char QQ_PushHead (PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry)
-{
-	unsigned int Head;
-
-	Head = (pQueue->Head + 1) % pQueue->Size;
-
-#if !defined(QQ_NO_OVERFLOW_CHECK)
-	if (Head == pQueue->Tail) {
-		return 0;
-	}			/* if */
-#endif				/* QQ_NO_OVERFLOW_CHECK */
-
-	pQueue->Array[pQueue->Head] = pEntry;
-	wmb ();
-	pQueue->Head = Head;
-	atomic_inc (&pQueue->EntryCnt);
-
-	return -1;
-}				/* QQ_PushHead */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/*    TRUE entry was added successfully.                                      */
-/*    FALSE queue is full.                                                    */
-/******************************************************************************/
-char QQ_PushTail (PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry)
-{
-	unsigned int Tail;
-
-	Tail = pQueue->Tail;
-	if (Tail == 0) {
-		Tail = pQueue->Size;
-	}			/* if */
-	Tail--;
-
-#if !defined(QQ_NO_OVERFLOW_CHECK)
-	if (Tail == pQueue->Head) {
-		return 0;
-	}			/* if */
-#endif				/* QQ_NO_OVERFLOW_CHECK */
-
-	pQueue->Array[Tail] = pEntry;
-	wmb ();
-	pQueue->Tail = Tail;
-	atomic_inc (&pQueue->EntryCnt);
-
-	return -1;
-}				/* QQ_PushTail */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-PQQ_ENTRY QQ_PopHead (PQQ_CONTAINER pQueue)
-{
-	unsigned int Head;
-	PQQ_ENTRY Entry;
-
-	Head = pQueue->Head;
-
-#if !defined(QQ_NO_UNDERFLOW_CHECK)
-	if (Head == pQueue->Tail) {
-		return (PQQ_ENTRY) 0;
-	}			/* if */
-#endif				/* QQ_NO_UNDERFLOW_CHECK */
-
-	if (Head == 0) {
-		Head = pQueue->Size;
-	}			/* if */
-	Head--;
-
-	Entry = pQueue->Array[Head];
-	membar ();
-
-	pQueue->Head = Head;
-	atomic_dec (&pQueue->EntryCnt);
-
-	return Entry;
-}				/* QQ_PopHead */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-PQQ_ENTRY QQ_PopTail (PQQ_CONTAINER pQueue)
-{
-	unsigned int Tail;
-	PQQ_ENTRY Entry;
-
-	Tail = pQueue->Tail;
-
-#if !defined(QQ_NO_UNDERFLOW_CHECK)
-	if (Tail == pQueue->Head) {
-		return (PQQ_ENTRY) 0;
-	}			/* if */
-#endif				/* QQ_NO_UNDERFLOW_CHECK */
-
-	Entry = pQueue->Array[Tail];
-	membar ();
-	pQueue->Tail = (Tail + 1) % pQueue->Size;
-	atomic_dec (&pQueue->EntryCnt);
-
-	return Entry;
-}				/* QQ_PopTail */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-PQQ_ENTRY QQ_GetHead (PQQ_CONTAINER pQueue, unsigned int Idx)
-{
-	if (Idx >= atomic_read (&pQueue->EntryCnt)) {
-		return (PQQ_ENTRY) 0;
-	}
-
-	if (pQueue->Head > Idx) {
-		Idx = pQueue->Head - Idx;
-	} else {
-		Idx = pQueue->Size - (Idx - pQueue->Head);
-	}
-	Idx--;
-
-	return pQueue->Array[Idx];
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-PQQ_ENTRY QQ_GetTail (PQQ_CONTAINER pQueue, unsigned int Idx)
-{
-	if (Idx >= atomic_read (&pQueue->EntryCnt)) {
-		return (PQQ_ENTRY) 0;
-	}
-
-	Idx += pQueue->Tail;
-	if (Idx >= pQueue->Size) {
-		Idx = Idx - pQueue->Size;
-	}
-
-	return pQueue->Array[Idx];
-}
diff --git a/drivers/net/bcm570x_autoneg.c b/drivers/net/bcm570x_autoneg.c
deleted file mode 100644
index 9023796..0000000
--- a/drivers/net/bcm570x_autoneg.c
+++ /dev/null
@@ -1,439 +0,0 @@
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2001 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/* History:                                                                   */
-/******************************************************************************/
-#if !defined(CONFIG_NET_MULTI)
-#if INCLUDE_TBI_SUPPORT
-#include "bcm570x_autoneg.h"
-#include "bcm570x_mm.h"
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-void
-MM_AnTxConfig(
-    PAN_STATE_INFO pAnInfo)
-{
-    PLM_DEVICE_BLOCK pDevice;
-
-    pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
-
-    REG_WR(pDevice, MacCtrl.TxAutoNeg, (LM_UINT32) pAnInfo->TxConfig.AsUSHORT);
-
-    pDevice->MacMode |= MAC_MODE_SEND_CONFIGS;
-    REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
-}
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-void
-MM_AnTxIdle(
-    PAN_STATE_INFO pAnInfo)
-{
-    PLM_DEVICE_BLOCK pDevice;
-
-    pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
-
-    pDevice->MacMode &= ~MAC_MODE_SEND_CONFIGS;
-    REG_WR(pDevice, MacCtrl.Mode, pDevice->MacMode);
-}
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-char
-MM_AnRxConfig(
-    PAN_STATE_INFO pAnInfo,
-    unsigned short *pRxConfig)
-{
-    PLM_DEVICE_BLOCK pDevice;
-    LM_UINT32 Value32;
-    char Retcode;
-
-    Retcode = AN_FALSE;
-
-    pDevice = (PLM_DEVICE_BLOCK) pAnInfo->pContext;
-
-    Value32 = REG_RD(pDevice, MacCtrl.Status);
-    if(Value32 & MAC_STATUS_RECEIVING_CFG)
-    {
-	Value32 = REG_RD(pDevice, MacCtrl.RxAutoNeg);
-	*pRxConfig = (unsigned short) Value32;
-
-	Retcode = AN_TRUE;
-    }
-
-    return Retcode;
-}
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-void
-AutonegInit(
-    PAN_STATE_INFO pAnInfo)
-{
-    unsigned long j;
-
-    for(j = 0; j < sizeof(AN_STATE_INFO); j++)
-    {
-	((unsigned char *) pAnInfo)[j] = 0;
-    }
-
-    /* Initialize the default advertisement register. */
-    pAnInfo->mr_adv_full_duplex = 1;
-    pAnInfo->mr_adv_sym_pause = 1;
-    pAnInfo->mr_adv_asym_pause = 1;
-    pAnInfo->mr_an_enable = 1;
-}
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-AUTONEG_STATUS
-Autoneg8023z(
-    PAN_STATE_INFO pAnInfo)
-{
-    unsigned short RxConfig;
-    unsigned long Delta_us;
-    AUTONEG_STATUS AnRet;
-
-    /* Get the current time. */
-    if(pAnInfo->State == AN_STATE_UNKNOWN)
-    {
-	pAnInfo->RxConfig.AsUSHORT = 0;
-	pAnInfo->CurrentTime_us = 0;
-	pAnInfo->LinkTime_us = 0;
-	pAnInfo->AbilityMatchCfg = 0;
-	pAnInfo->AbilityMatchCnt = 0;
-	pAnInfo->AbilityMatch = AN_FALSE;
-	pAnInfo->IdleMatch = AN_FALSE;
-	pAnInfo->AckMatch = AN_FALSE;
-    }
-
-    /* Increment the timer tick.  This function is called every microsecon. */
-/*    pAnInfo->CurrentTime_us++; */
-
-    /* Set the AbilityMatch, IdleMatch, and AckMatch flags if their */
-    /* corresponding conditions are satisfied. */
-    if(MM_AnRxConfig(pAnInfo, &RxConfig))
-    {
-	if(RxConfig != pAnInfo->AbilityMatchCfg)
-	{
-	    pAnInfo->AbilityMatchCfg = RxConfig;
-	    pAnInfo->AbilityMatch = AN_FALSE;
-	    pAnInfo->AbilityMatchCnt = 0;
-	}
-	else
-	{
-	    pAnInfo->AbilityMatchCnt++;
-	    if(pAnInfo->AbilityMatchCnt > 1)
-	    {
-		pAnInfo->AbilityMatch = AN_TRUE;
-		pAnInfo->AbilityMatchCfg = RxConfig;
-	    }
-	}
-
-	if(RxConfig & AN_CONFIG_ACK)
-	{
-	    pAnInfo->AckMatch = AN_TRUE;
-	}
-	else
-	{
-	    pAnInfo->AckMatch = AN_FALSE;
-	}
-
-	pAnInfo->IdleMatch = AN_FALSE;
-    }
-    else
-    {
-	pAnInfo->IdleMatch = AN_TRUE;
-
-	pAnInfo->AbilityMatchCfg = 0;
-	pAnInfo->AbilityMatchCnt = 0;
-	pAnInfo->AbilityMatch = AN_FALSE;
-	pAnInfo->AckMatch = AN_FALSE;
-
-	RxConfig = 0;
-    }
-
-    /* Save the last Config. */
-    pAnInfo->RxConfig.AsUSHORT = RxConfig;
-
-    /* Default return code. */
-    AnRet = AUTONEG_STATUS_OK;
-
-    /* Autoneg state machine as defined in 802.3z section 37.3.1.5. */
-    switch(pAnInfo->State)
-    {
-	case AN_STATE_UNKNOWN:
-	    if(pAnInfo->mr_an_enable || pAnInfo->mr_restart_an)
-	    {
-		pAnInfo->CurrentTime_us = 0;
-		pAnInfo->State = AN_STATE_AN_ENABLE;
-	    }
-
-	    /* Fall through.*/
-
-	case AN_STATE_AN_ENABLE:
-	    pAnInfo->mr_an_complete = AN_FALSE;
-	    pAnInfo->mr_page_rx = AN_FALSE;
-
-	    if(pAnInfo->mr_an_enable)
-	    {
-		pAnInfo->LinkTime_us = 0;
-		pAnInfo->AbilityMatchCfg = 0;
-		pAnInfo->AbilityMatchCnt = 0;
-		pAnInfo->AbilityMatch = AN_FALSE;
-		pAnInfo->IdleMatch = AN_FALSE;
-		pAnInfo->AckMatch = AN_FALSE;
-
-		pAnInfo->State = AN_STATE_AN_RESTART_INIT;
-	    }
-	    else
-	    {
-		pAnInfo->State = AN_STATE_DISABLE_LINK_OK;
-	    }
-	    break;
-
-	case AN_STATE_AN_RESTART_INIT:
-	    pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
-	    pAnInfo->mr_np_loaded = AN_FALSE;
-
-	    pAnInfo->TxConfig.AsUSHORT = 0;
-	    MM_AnTxConfig(pAnInfo);
-
-	    AnRet = AUTONEG_STATUS_TIMER_ENABLED;
-
-	    pAnInfo->State = AN_STATE_AN_RESTART;
-
-	    /* Fall through.*/
-
-	case AN_STATE_AN_RESTART:
-	    /* Get the current time and compute the delta with the saved */
-	    /* link timer. */
-	    Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
-	    if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
-	    {
-		pAnInfo->State = AN_STATE_ABILITY_DETECT_INIT;
-	    }
-	    else
-	    {
-		AnRet = AUTONEG_STATUS_TIMER_ENABLED;
-	    }
-	    break;
-
-	case AN_STATE_DISABLE_LINK_OK:
-	    AnRet = AUTONEG_STATUS_DONE;
-	    break;
-
-	case AN_STATE_ABILITY_DETECT_INIT:
-	    /* Note: in the state diagram, this variable is set to */
-	    /* mr_adv_ability<12>.  Is this right?. */
-	    pAnInfo->mr_toggle_tx = AN_FALSE;
-
-	    /* Send the config as advertised in the advertisement register. */
-	    pAnInfo->TxConfig.AsUSHORT = 0;
-	    pAnInfo->TxConfig.D5_FD = pAnInfo->mr_adv_full_duplex;
-	    pAnInfo->TxConfig.D6_HD = pAnInfo->mr_adv_half_duplex;
-	    pAnInfo->TxConfig.D7_PS1 = pAnInfo->mr_adv_sym_pause;
-	    pAnInfo->TxConfig.D8_PS2 = pAnInfo->mr_adv_asym_pause;
-	    pAnInfo->TxConfig.D12_RF1 = pAnInfo->mr_adv_remote_fault1;
-	    pAnInfo->TxConfig.D13_RF2 = pAnInfo->mr_adv_remote_fault2;
-	    pAnInfo->TxConfig.D15_NP = pAnInfo->mr_adv_next_page;
-
-	    MM_AnTxConfig(pAnInfo);
-
-	    pAnInfo->State = AN_STATE_ABILITY_DETECT;
-
-	    break;
-
-	case AN_STATE_ABILITY_DETECT:
-	    if(pAnInfo->AbilityMatch == AN_TRUE &&
-		pAnInfo->RxConfig.AsUSHORT != 0)
-	    {
-		pAnInfo->State = AN_STATE_ACK_DETECT_INIT;
-	    }
-
-	    break;
-
-	case AN_STATE_ACK_DETECT_INIT:
-	    pAnInfo->TxConfig.D14_ACK = 1;
-	    MM_AnTxConfig(pAnInfo);
-
-	    pAnInfo->State = AN_STATE_ACK_DETECT;
-
-	    /* Fall through. */
-
-	case AN_STATE_ACK_DETECT:
-	    if(pAnInfo->AckMatch == AN_TRUE)
-	    {
-		if((pAnInfo->RxConfig.AsUSHORT & ~AN_CONFIG_ACK) ==
-		    (pAnInfo->AbilityMatchCfg & ~AN_CONFIG_ACK))
-		{
-		    pAnInfo->State = AN_STATE_COMPLETE_ACK_INIT;
-		}
-		else
-		{
-		    pAnInfo->State = AN_STATE_AN_ENABLE;
-		}
-	    }
-	    else if(pAnInfo->AbilityMatch == AN_TRUE &&
-		pAnInfo->RxConfig.AsUSHORT == 0)
-	    {
-		pAnInfo->State = AN_STATE_AN_ENABLE;
-	    }
-
-	    break;
-
-	case AN_STATE_COMPLETE_ACK_INIT:
-	    /* Make sure invalid bits are not set. */
-	    if(pAnInfo->RxConfig.bits.D0 || pAnInfo->RxConfig.bits.D1 ||
-		pAnInfo->RxConfig.bits.D2 || pAnInfo->RxConfig.bits.D3 ||
-		pAnInfo->RxConfig.bits.D4 || pAnInfo->RxConfig.bits.D9 ||
-		pAnInfo->RxConfig.bits.D10 || pAnInfo->RxConfig.bits.D11)
-	    {
-		AnRet = AUTONEG_STATUS_FAILED;
-		break;
-	    }
-
-	    /* Set up the link partner advertisement register. */
-	    pAnInfo->mr_lp_adv_full_duplex = pAnInfo->RxConfig.D5_FD;
-	    pAnInfo->mr_lp_adv_half_duplex = pAnInfo->RxConfig.D6_HD;
-	    pAnInfo->mr_lp_adv_sym_pause = pAnInfo->RxConfig.D7_PS1;
-	    pAnInfo->mr_lp_adv_asym_pause = pAnInfo->RxConfig.D8_PS2;
-	    pAnInfo->mr_lp_adv_remote_fault1 = pAnInfo->RxConfig.D12_RF1;
-	    pAnInfo->mr_lp_adv_remote_fault2 = pAnInfo->RxConfig.D13_RF2;
-	    pAnInfo->mr_lp_adv_next_page = pAnInfo->RxConfig.D15_NP;
-
-	    pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
-
-	    pAnInfo->mr_toggle_tx = !pAnInfo->mr_toggle_tx;
-	    pAnInfo->mr_toggle_rx = pAnInfo->RxConfig.bits.D11;
-	    pAnInfo->mr_np_rx = pAnInfo->RxConfig.D15_NP;
-	    pAnInfo->mr_page_rx = AN_TRUE;
-
-	    pAnInfo->State = AN_STATE_COMPLETE_ACK;
-	    AnRet = AUTONEG_STATUS_TIMER_ENABLED;
-
-	    break;
-
-	case AN_STATE_COMPLETE_ACK:
-	    if(pAnInfo->AbilityMatch == AN_TRUE &&
-		pAnInfo->RxConfig.AsUSHORT == 0)
-	    {
-		pAnInfo->State = AN_STATE_AN_ENABLE;
-		break;
-	    }
-
-	    Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
-
-	    if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
-	    {
-		if(pAnInfo->mr_adv_next_page == 0 ||
-		    pAnInfo->mr_lp_adv_next_page == 0)
-		{
-		    pAnInfo->State = AN_STATE_IDLE_DETECT_INIT;
-		}
-		else
-		{
-		    if(pAnInfo->TxConfig.bits.D15 == 0 &&
-			pAnInfo->mr_np_rx == 0)
-		    {
-			pAnInfo->State = AN_STATE_IDLE_DETECT_INIT;
-		    }
-		    else
-		    {
-			AnRet = AUTONEG_STATUS_FAILED;
-		    }
-		}
-	    }
-
-	    break;
-
-	case AN_STATE_IDLE_DETECT_INIT:
-	    pAnInfo->LinkTime_us = pAnInfo->CurrentTime_us;
-
-	    MM_AnTxIdle(pAnInfo);
-
-	    pAnInfo->State = AN_STATE_IDLE_DETECT;
-
-	    AnRet = AUTONEG_STATUS_TIMER_ENABLED;
-
-	    break;
-
-	case AN_STATE_IDLE_DETECT:
-	    if(pAnInfo->AbilityMatch == AN_TRUE &&
-		pAnInfo->RxConfig.AsUSHORT == 0)
-	    {
-		pAnInfo->State = AN_STATE_AN_ENABLE;
-		break;
-	    }
-
-	    Delta_us = pAnInfo->CurrentTime_us - pAnInfo->LinkTime_us;
-	    if(Delta_us > AN_LINK_TIMER_INTERVAL_US)
-	    {
-#if 0
-/*                if(pAnInfo->IdleMatch == AN_TRUE) */
-/*                { */
-#endif
-		    pAnInfo->State = AN_STATE_LINK_OK;
-#if 0
-/*                } */
-/*                else */
-/*                { */
-/*                    AnRet = AUTONEG_STATUS_FAILED; */
-/*                    break; */
-/*                } */
-#endif
-	    }
-
-	    break;
-
-	case AN_STATE_LINK_OK:
-	    pAnInfo->mr_an_complete = AN_TRUE;
-	    pAnInfo->mr_link_ok = AN_TRUE;
-	    AnRet = AUTONEG_STATUS_DONE;
-
-	    break;
-
-	case AN_STATE_NEXT_PAGE_WAIT_INIT:
-	    break;
-
-	case AN_STATE_NEXT_PAGE_WAIT:
-	    break;
-
-	default:
-	    AnRet = AUTONEG_STATUS_FAILED;
-	    break;
-    }
-
-    return AnRet;
-}
-#endif /* INCLUDE_TBI_SUPPORT */
-
-#endif /* !defined(CONFIG_NET_MULTI) */
diff --git a/drivers/net/bcm570x_autoneg.h b/drivers/net/bcm570x_autoneg.h
deleted file mode 100644
index 7830944..0000000
--- a/drivers/net/bcm570x_autoneg.h
+++ /dev/null
@@ -1,408 +0,0 @@
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2001 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/* History:                                                                   */
-/******************************************************************************/
-
-
-#ifndef AUTONEG_H
-#define AUTONEG_H
-
-
-/******************************************************************************/
-/* Constants. */
-/******************************************************************************/
-
-#define AN_LINK_TIMER_INTERVAL_US           9000       /* 10ms */
-
-/* TRUE, FALSE */
-#define AN_TRUE                             1
-#define AN_FALSE                            0
-
-
-/******************************************************************************/
-/* Main data structure for keeping track of 802.3z auto-negotation state */
-/* variables as shown in Figure 37-6 of the IEEE 802.3z specification. */
-/******************************************************************************/
-
-typedef struct
-{
-    /* Current auto-negotiation state. */
-    unsigned long State;
-    #define AN_STATE_UNKNOWN                        0
-    #define AN_STATE_AN_ENABLE                      1
-    #define AN_STATE_AN_RESTART_INIT                2
-    #define AN_STATE_AN_RESTART                     3
-    #define AN_STATE_DISABLE_LINK_OK                4
-    #define AN_STATE_ABILITY_DETECT_INIT            5
-    #define AN_STATE_ABILITY_DETECT                 6
-    #define AN_STATE_ACK_DETECT_INIT                7
-    #define AN_STATE_ACK_DETECT                     8
-    #define AN_STATE_COMPLETE_ACK_INIT              9
-    #define AN_STATE_COMPLETE_ACK                   10
-    #define AN_STATE_IDLE_DETECT_INIT               11
-    #define AN_STATE_IDLE_DETECT                    12
-    #define AN_STATE_LINK_OK                        13
-    #define AN_STATE_NEXT_PAGE_WAIT_INIT            14
-    #define AN_STATE_NEXT_PAGE_WAIT                 16
-
-    /* Link timer. */
-    unsigned long LinkTime_us;
-
-    /* Current time. */
-    unsigned long CurrentTime_us;
-
-    /* Need these values for consistency check. */
-    unsigned short AbilityMatchCfg;
-
-    /* Ability, idle, and ack match functions. */
-    unsigned long AbilityMatchCnt;
-    char AbilityMatch;
-    char IdleMatch;
-    char AckMatch;
-
-    /* Tx config data */
-    union
-    {
-	/* The TxConfig register is arranged as follows:                      */
-	/*                                                                    */
-	/* MSB                                                           LSB  */
-	/* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+  */
-	/* | D7| D6| D5| D4| D3| D2| D1| D0|D15|D14|D13|D12|D11|D10| D9| D8|  */
-	/* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+  */
-	struct
-	{
-#ifdef BIG_ENDIAN_HOST
-	    unsigned int D7:1;        /* PS1 */
-	    unsigned int D6:1;        /* HD */
-	    unsigned int D5:1;        /* FD */
-	    unsigned int D4:1;
-	    unsigned int D3:1;
-	    unsigned int D2:1;
-	    unsigned int D1:1;
-	    unsigned int D0:1;
-	    unsigned int D15:1;       /* NP */
-	    unsigned int D14:1;       /* ACK */
-	    unsigned int D13:1;       /* RF2 */
-	    unsigned int D12:1;       /* RF1 */
-	    unsigned int D11:1;
-	    unsigned int D10:1;
-	    unsigned int D9:1;
-	    unsigned int D8:1;        /* PS2 */
-#else /* BIG_ENDIAN_HOST */
-	    unsigned int D8:1;        /* PS2 */
-	    unsigned int D9:1;
-	    unsigned int D10:1;
-	    unsigned int D11:1;
-	    unsigned int D12:1;       /* RF1 */
-	    unsigned int D13:1;       /* RF2 */
-	    unsigned int D14:1;       /* ACK */
-	    unsigned int D15:1;       /* NP */
-	    unsigned int D0:1;
-	    unsigned int D1:1;
-	    unsigned int D2:1;
-	    unsigned int D3:1;
-	    unsigned int D4:1;
-	    unsigned int D5:1;        /* FD */
-	    unsigned int D6:1;        /* HD */
-	    unsigned int D7:1;        /* PS1 */
-#endif
-	} bits;
-
-	unsigned short AsUSHORT;
-
-	#define D8_PS2                      bits.D8
-	#define D12_RF1                     bits.D12
-	#define D13_RF2                     bits.D13
-	#define D14_ACK                     bits.D14
-	#define D15_NP                      bits.D15
-	#define D5_FD                       bits.D5
-	#define D6_HD                       bits.D6
-	#define D7_PS1                      bits.D7
-    } TxConfig;
-
-    /* Rx config data */
-    union
-    {
-	/* The RxConfig register is arranged as follows:                      */
-	/*                                                                    */
-	/* MSB                                                           LSB  */
-	/* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+  */
-	/* | D7| D6| D5| D4| D3| D2| D1| D0|D15|D14|D13|D12|D11|D10| D9| D8|  */
-	/* +---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+---+  */
-	struct
-	{
-#ifdef BIG_ENDIAN_HOST
-	    unsigned int D7:1;        /* PS1 */
-	    unsigned int D6:1;        /* HD */
-	    unsigned int D5:1;        /* FD */
-	    unsigned int D4:1;
-	    unsigned int D3:1;
-	    unsigned int D2:1;
-	    unsigned int D1:1;
-	    unsigned int D0:1;
-	    unsigned int D15:1;       /* NP */
-	    unsigned int D14:1;       /* ACK */
-	    unsigned int D13:1;       /* RF2 */
-	    unsigned int D12:1;       /* RF1 */
-	    unsigned int D11:1;
-	    unsigned int D10:1;
-	    unsigned int D9:1;
-	    unsigned int D8:1;        /* PS2 */
-#else /* BIG_ENDIAN_HOST */
-	    unsigned int D8:1;        /* PS2 */
-	    unsigned int D9:1;
-	    unsigned int D10:1;
-	    unsigned int D11:1;
-	    unsigned int D12:1;       /* RF1 */
-	    unsigned int D13:1;       /* RF2 */
-	    unsigned int D14:1;       /* ACK */
-	    unsigned int D15:1;       /* NP */
-	    unsigned int D0:1;
-	    unsigned int D1:1;
-	    unsigned int D2:1;
-	    unsigned int D3:1;
-	    unsigned int D4:1;
-	    unsigned int D5:1;        /* FD */
-	    unsigned int D6:1;        /* HD */
-	    unsigned int D7:1;        /* PS1 */
-#endif
-	} bits;
-
-	unsigned short AsUSHORT;
-    } RxConfig;
-
-    #define AN_CONFIG_NP                            0x0080
-    #define AN_CONFIG_ACK                           0x0040
-    #define AN_CONFIG_RF2                           0x0020
-    #define AN_CONFIG_RF1                           0x0010
-    #define AN_CONFIG_PS2                           0x0001
-    #define AN_CONFIG_PS1                           0x8000
-    #define AN_CONFIG_HD                            0x4000
-    #define AN_CONFIG_FD                            0x2000
-
-
-    /* Management registers. */
-
-    /* Control register. */
-    union
-    {
-	struct
-	{
-	    unsigned int an_enable:1;
-	    unsigned int loopback:1;
-	    unsigned int reset:1;
-	    unsigned int restart_an:1;
-	} bits;
-
-	unsigned short AsUSHORT;
-
-	#define mr_an_enable                Mr0.bits.an_enable
-	#define mr_loopback                 Mr0.bits.loopback
-	#define mr_main_reset               Mr0.bits.reset
-	#define mr_restart_an               Mr0.bits.restart_an
-    } Mr0;
-
-    /* Status register. */
-    union
-    {
-	struct
-	{
-	    unsigned int an_complete:1;
-	    unsigned int link_ok:1;
-	} bits;
-
-	unsigned short AsUSHORT;
-
-	#define mr_an_complete              Mr1.bits.an_complete
-	#define mr_link_ok                  Mr1.bits.link_ok
-    } Mr1;
-
-    /* Advertisement register. */
-    union
-    {
-	struct
-	{
-	    unsigned int reserved_4:5;
-	    unsigned int full_duplex:1;
-	    unsigned int half_duplex:1;
-	    unsigned int sym_pause:1;
-	    unsigned int asym_pause:1;
-	    unsigned int reserved_11:3;
-	    unsigned int remote_fault1:1;
-	    unsigned int remote_fault2:1;
-	    unsigned int reserved_14:1;
-	    unsigned int next_page:1;
-	} bits;
-
-	unsigned short AsUSHORT;
-
-	#define mr_adv_full_duplex          Mr4.bits.full_duplex
-	#define mr_adv_half_duplex          Mr4.bits.half_duplex
-	#define mr_adv_sym_pause            Mr4.bits.sym_pause
-	#define mr_adv_asym_pause           Mr4.bits.asym_pause
-	#define mr_adv_remote_fault1        Mr4.bits.remote_fault1
-	#define mr_adv_remote_fault2        Mr4.bits.remote_fault2
-	#define mr_adv_next_page            Mr4.bits.next_page
-    } Mr4;
-
-    /* Link partner advertisement register. */
-    union
-    {
-	struct
-	{
-	    unsigned int reserved_4:5;
-	    unsigned int lp_full_duplex:1;
-	    unsigned int lp_half_duplex:1;
-	    unsigned int lp_sym_pause:1;
-	    unsigned int lp_asym_pause:1;
-	    unsigned int reserved_11:3;
-	    unsigned int lp_remote_fault1:1;
-	    unsigned int lp_remote_fault2:1;
-	    unsigned int lp_ack:1;
-	    unsigned int lp_next_page:1;
-	} bits;
-
-	unsigned short AsUSHORT;
-
-	#define mr_lp_adv_full_duplex       Mr5.bits.lp_full_duplex
-	#define mr_lp_adv_half_duplex       Mr5.bits.lp_half_duplex
-	#define mr_lp_adv_sym_pause         Mr5.bits.lp_sym_pause
-	#define mr_lp_adv_asym_pause        Mr5.bits.lp_asym_pause
-	#define mr_lp_adv_remote_fault1     Mr5.bits.lp_remote_fault1
-	#define mr_lp_adv_remote_fault2     Mr5.bits.lp_remote_fault2
-	#define mr_lp_adv_next_page         Mr5.bits.lp_next_page
-    } Mr5;
-
-    /* Auto-negotiation expansion register. */
-    union
-    {
-	struct
-	{
-	    unsigned int reserved_0:1;
-	    unsigned int page_received:1;
-	    unsigned int next_pageable:1;
-	    unsigned int reserved_15:13;
-	} bits;
-
-	unsigned short AsUSHORT;
-    } Mr6;
-
-    /* Auto-negotiation next page transmit register. */
-    union
-    {
-	struct
-	{
-	    unsigned int code_field:11;
-	    unsigned int toggle:1;
-	    unsigned int ack2:1;
-	    unsigned int message_page:1;
-	    unsigned int reserved_14:1;
-	    unsigned int next_page:1;
-	} bits;
-
-	unsigned short AsUSHORT;
-
-	#define mr_np_tx                    Mr7.AsUSHORT
-    } Mr7;
-
-    /* Auto-negotiation link partner ability register. */
-    union
-    {
-	struct
-	{
-	    unsigned int code_field:11;
-	    unsigned int toggle:1;
-	    unsigned int ack2:1;
-	    unsigned int message_page:1;
-	    unsigned int ack:1;
-	    unsigned int next_page:1;
-	} bits;
-
-	unsigned short AsUSHORT;
-
-	#define mr_lp_np_rx                 Mr8.AsUSHORT
-    } Mr8;
-
-    /* Extended status register. */
-    union
-    {
-	struct
-	{
-	    unsigned int reserved_11:12;
-	    unsigned int base1000_t_hd:1;
-	    unsigned int base1000_t_fd:1;
-	    unsigned int base1000_x_hd:1;
-	    unsigned int base1000_x_fd:1;
-	} bits;
-
-	unsigned short AsUSHORT;
-    } Mr15;
-
-    /* Miscellaneous state variables. */
-    union
-    {
-	struct
-	{
-	    unsigned int toggle_tx:1;
-	    unsigned int toggle_rx:1;
-	    unsigned int np_rx:1;
-	    unsigned int page_rx:1;
-	    unsigned int np_loaded:1;
-	} bits;
-
-	unsigned short AsUSHORT;
-
-	#define mr_toggle_tx                MrMisc.bits.toggle_tx
-	#define mr_toggle_rx                MrMisc.bits.toggle_rx
-	#define mr_np_rx                    MrMisc.bits.np_rx
-	#define mr_page_rx                  MrMisc.bits.page_rx
-	#define mr_np_loaded                MrMisc.bits.np_loaded
-    } MrMisc;
-
-
-    /* Implement specifics */
-
-    /* Pointer to the operating system specific data structure. */
-    void *pContext;
-} AN_STATE_INFO, *PAN_STATE_INFO;
-
-
-/******************************************************************************/
-/* Return code of Autoneg8023z. */
-/******************************************************************************/
-
-typedef enum
-{
-    AUTONEG_STATUS_OK               = 0,
-    AUTONEG_STATUS_DONE             = 1,
-    AUTONEG_STATUS_TIMER_ENABLED    = 2,
-    AUTONEG_STATUS_FAILED           = 0xfffffff
-} AUTONEG_STATUS, *PAUTONEG_STATUS;
-
-
-/******************************************************************************/
-/* Function prototypes. */
-/******************************************************************************/
-
-AUTONEG_STATUS Autoneg8023z(PAN_STATE_INFO pAnInfo);
-void AutonegInit(PAN_STATE_INFO pAnInfo);
-
-
-/******************************************************************************/
-/* The following functions are defined in the os-dependent module. */
-/******************************************************************************/
-
-void MM_AnTxConfig(PAN_STATE_INFO pAnInfo);
-void MM_AnTxIdle(PAN_STATE_INFO pAnInfo);
-char MM_AnRxConfig(PAN_STATE_INFO pAnInfo, unsigned short *pRxConfig);
-
-
-#endif /* AUTONEG_H */
diff --git a/drivers/net/bcm570x_bits.h b/drivers/net/bcm570x_bits.h
deleted file mode 100644
index 615d61e..0000000
--- a/drivers/net/bcm570x_bits.h
+++ /dev/null
@@ -1,57 +0,0 @@
-
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/* History:                                                                   */
-/*    02/25/00 Hav Khauv        Initial version.                              */
-/******************************************************************************/
-
-#ifndef BITS_H
-#define BITS_H
-
-
-/******************************************************************************/
-/* Bit Mask definitions */
-/******************************************************************************/
-#define BIT_NONE            0x00
-#define BIT_0               0x01
-#define BIT_1               0x02
-#define BIT_2               0x04
-#define BIT_3               0x08
-#define BIT_4               0x10
-#define BIT_5               0x20
-#define BIT_6               0x40
-#define BIT_7               0x80
-#define BIT_8               0x0100
-#define BIT_9               0x0200
-#define BIT_10              0x0400
-#define BIT_11              0x0800
-#define BIT_12              0x1000
-#define BIT_13              0x2000
-#define BIT_14              0x4000
-#define BIT_15              0x8000
-#define BIT_16              0x010000
-#define BIT_17              0x020000
-#define BIT_18              0x040000
-#define BIT_19              0x080000
-#define BIT_20              0x100000
-#define BIT_21              0x200000
-#define BIT_22              0x400000
-#define BIT_23              0x800000
-#define BIT_24              0x01000000
-#define BIT_25              0x02000000
-#define BIT_26              0x04000000
-#define BIT_27              0x08000000
-#define BIT_28              0x10000000
-#define BIT_29              0x20000000
-#define BIT_30              0x40000000
-#define BIT_31              0x80000000
-
-#endif /* BITS_H */
diff --git a/drivers/net/bcm570x_debug.h b/drivers/net/bcm570x_debug.h
deleted file mode 100644
index 88e209b..0000000
--- a/drivers/net/bcm570x_debug.h
+++ /dev/null
@@ -1,109 +0,0 @@
-
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/* History:                                                                   */
-/*    02/25/00 Hav Khauv        Initial version.                              */
-/******************************************************************************/
-
-#ifndef DEBUG_H
-#define DEBUG_H
-
-#ifdef VXWORKS
-#include <vxWorks.h>
-#endif
-
-/******************************************************************************/
-/* Debug macros                                                               */
-/******************************************************************************/
-
-/* Code path for controlling output debug messages. */
-/* Define your code path here. */
-#define CP_INIT                     0x010000
-#define CP_SEND                     0x020000
-#define CP_RCV                      0x040000
-#define CP_INT                      0x080000
-#define CP_UINIT                    0x100000
-#define CP_RESET                    0x200000
-
-#define CP_ALL                      (CP_INIT | CP_SEND | CP_RCV | CP_INT | \
-				    CP_RESET | CP_UINIT)
-
-#define CP_MASK                     0xffff0000
-
-
-/* Debug message levels. */
-#define LV_VERBOSE                  0x03
-#define LV_INFORM                   0x02
-#define LV_WARN                     0x01
-#define LV_FATAL                    0x00
-
-#define LV_MASK                     0xffff
-
-
-/* Code path and messsage level combined.  These are the first argument of */
-/* the DbgMessage macro. */
-#define INIT_V                      (CP_INIT | LV_VERBOSE)
-#define INIT_I                      (CP_INIT | LV_INFORM)
-#define INIT_W                      (CP_INIT | LV_WARN)
-#define SEND_V                      (CP_SEND | LV_VERBOSE)
-#define SEND_I                      (CP_SEND | LV_INFORM)
-#define SEND_W                      (CP_SEND | LV_WARN)
-#define RCV_V                       (CP_RCV | LV_VERBOSE)
-#define RCV_I                       (CP_RCV | LV_INFORM)
-#define RCV_W                       (CP_RCV | LV_WARN)
-#define INT_V                       (CP_INT | LV_VERBOSE)
-#define INT_I                       (CP_INT | LV_INFORM)
-#define INT_W                       (CP_INT | LV_WARN)
-#define UINIT_V                     (CP_UINIT | LV_VERBOSE)
-#define UINIT_I                     (CP_UINIT | LV_INFORM)
-#define UINIT_W                     (CP_UINIT | LV_WARN)
-#define RESET_V                     (CP_RESET | LV_VERBOSE)
-#define RESET_I                     (CP_RESET | LV_INFORM)
-#define RESET_W                     (CP_RESET | LV_WARN)
-#define CPALL_V                     (CP_ALL | LV_VERBOSE)
-#define CPALL_I                     (CP_ALL | LV_INFORM)
-#define CPALL_W                     (CP_ALL | LV_WARN)
-
-
-/* All code path message levels. */
-#define FATAL                       (CP_ALL | LV_FATAL)
-#define WARN                        (CP_ALL | LV_WARN)
-#define INFORM                      (CP_ALL | LV_INFORM)
-#define VERBOSE                     (CP_ALL | LV_VERBOSE)
-
-
-/* These constants control the message output. */
-/* Set your debug message output level and code path here. */
-#ifndef DBG_MSG_CP
-#define DBG_MSG_CP                  CP_ALL      /* Where to output messages. */
-#endif
-
-#ifndef DBG_MSG_LV
-#define DBG_MSG_LV                  LV_VERBOSE  /* Level of message output. */
-#endif
-
-/* DbgMessage macro. */
-#if DBG
-#define DbgMessage(CNTRL, MESSAGE)  \
-    if((CNTRL & DBG_MSG_CP) && ((CNTRL & LV_MASK) <= DBG_MSG_LV)) \
-	printf MESSAGE
-#define DbgBreak()                 DbgBreakPoint()
-#undef STATIC
-#define STATIC
-#else
-#define DbgMessage(CNTRL, MESSAGE)
-#define DbgBreak()
-#undef STATIC
-#define STATIC static
-#endif /* DBG */
-
-
-#endif /* DEBUG_H */
diff --git a/drivers/net/bcm570x_lm.h b/drivers/net/bcm570x_lm.h
deleted file mode 100644
index c07b767..0000000
--- a/drivers/net/bcm570x_lm.h
+++ /dev/null
@@ -1,434 +0,0 @@
-
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/* History:                                                                   */
-/*    02/25/00 Hav Khauv        Initial version.                              */
-/******************************************************************************/
-
-#ifndef LM_H
-#define LM_H
-
-#include "bcm570x_queue.h"
-#include "bcm570x_bits.h"
-
-/******************************************************************************/
-/* Basic types. */
-/******************************************************************************/
-
-typedef char LM_CHAR, *PLM_CHAR;
-typedef unsigned int LM_UINT, *PLM_UINT;
-typedef unsigned char LM_UINT8, *PLM_UINT8;
-typedef unsigned short LM_UINT16, *PLM_UINT16;
-typedef unsigned int LM_UINT32, *PLM_UINT32;
-typedef unsigned int LM_COUNTER, *PLM_COUNTER;
-typedef void LM_VOID, *PLM_VOID;
-typedef char LM_BOOL, *PLM_BOOL;
-
-/* 64bit value. */
-typedef struct {
-#ifdef BIG_ENDIAN_HOST
-	LM_UINT32 High;
-	LM_UINT32 Low;
-#else				/* BIG_ENDIAN_HOST */
-	LM_UINT32 Low;
-	LM_UINT32 High;
-#endif				/* !BIG_ENDIAN_HOST */
-} LM_UINT64, *PLM_UINT64;
-
-typedef LM_UINT64 LM_PHYSICAL_ADDRESS, *PLM_PHYSICAL_ADDRESS;
-
-/* void LM_INC_PHYSICAL_ADDRESS(PLM_PHYSICAL_ADDRESS pAddr,LM_UINT32 IncSize) */
-#define LM_INC_PHYSICAL_ADDRESS(pAddr, IncSize)             \
-    {                                                       \
-	LM_UINT32 OrgLow;                                   \
-							    \
-	OrgLow = (pAddr)->Low;                              \
-	(pAddr)->Low += IncSize;                            \
-	if((pAddr)->Low < OrgLow) {                         \
-	    (pAddr)->High++; /* Wrap around. */             \
-	}                                                   \
-    }
-
-#ifndef NULL
-#define NULL                ((void *) 0)
-#endif				/* NULL */
-
-#ifndef OFFSETOF
-#define OFFSETOF(_s, _m)    (MM_UINT_PTR(&(((_s *) 0)->_m)))
-#endif				/* OFFSETOF */
-
-/******************************************************************************/
-/* Simple macros. */
-/******************************************************************************/
-
-#define IS_ETH_BROADCAST(_pEthAddr)                                         \
-    (((unsigned char *) (_pEthAddr))[0] == ((unsigned char) 0xff))
-
-#define IS_ETH_MULTICAST(_pEthAddr)                                         \
-    (((unsigned char *) (_pEthAddr))[0] & ((unsigned char) 0x01))
-
-#define IS_ETH_ADDRESS_EQUAL(_pEtherAddr1, _pEtherAddr2)                    \
-    ((((unsigned char *) (_pEtherAddr1))[0] ==                              \
-    ((unsigned char *) (_pEtherAddr2))[0]) &&                               \
-    (((unsigned char *) (_pEtherAddr1))[1] ==                               \
-    ((unsigned char *) (_pEtherAddr2))[1]) &&                               \
-    (((unsigned char *) (_pEtherAddr1))[2] ==                               \
-    ((unsigned char *) (_pEtherAddr2))[2]) &&                               \
-    (((unsigned char *) (_pEtherAddr1))[3] ==                               \
-    ((unsigned char *) (_pEtherAddr2))[3]) &&                               \
-    (((unsigned char *) (_pEtherAddr1))[4] ==                               \
-    ((unsigned char *) (_pEtherAddr2))[4]) &&                               \
-    (((unsigned char *) (_pEtherAddr1))[5] ==                               \
-    ((unsigned char *) (_pEtherAddr2))[5]))
-
-#define COPY_ETH_ADDRESS(_Src, _Dst)                                        \
-    ((unsigned char *) (_Dst))[0] = ((unsigned char *) (_Src))[0];          \
-    ((unsigned char *) (_Dst))[1] = ((unsigned char *) (_Src))[1];          \
-    ((unsigned char *) (_Dst))[2] = ((unsigned char *) (_Src))[2];          \
-    ((unsigned char *) (_Dst))[3] = ((unsigned char *) (_Src))[3];          \
-    ((unsigned char *) (_Dst))[4] = ((unsigned char *) (_Src))[4];          \
-    ((unsigned char *) (_Dst))[5] = ((unsigned char *) (_Src))[5];
-
-/******************************************************************************/
-/* Constants. */
-/******************************************************************************/
-
-#define ETHERNET_ADDRESS_SIZE           6
-#define ETHERNET_PACKET_HEADER_SIZE     14
-#define MIN_ETHERNET_PACKET_SIZE        64	/* with 4 byte crc. */
-#define MAX_ETHERNET_PACKET_SIZE        1518	/* with 4 byte crc. */
-#define MIN_ETHERNET_PACKET_SIZE_NO_CRC 60
-#define MAX_ETHERNET_PACKET_SIZE_NO_CRC 1514
-#define MAX_ETHERNET_PACKET_BUFFER_SIZE 1536	/* A nice even number. */
-
-#ifndef LM_MAX_MC_TABLE_SIZE
-#define LM_MAX_MC_TABLE_SIZE            32
-#endif				/* LM_MAX_MC_TABLE_SIZE */
-#define LM_MC_ENTRY_SIZE                (ETHERNET_ADDRESS_SIZE+1)
-#define LM_MC_INSTANCE_COUNT_INDEX      (LM_MC_ENTRY_SIZE-1)
-
-/* Receive filter masks. */
-#define LM_ACCEPT_UNICAST               0x0001
-#define LM_ACCEPT_MULTICAST             0x0002
-#define LM_ACCEPT_ALL_MULTICAST         0x0004
-#define LM_ACCEPT_BROADCAST             0x0008
-#define LM_ACCEPT_ERROR_PACKET          0x0010
-
-#define LM_PROMISCUOUS_MODE             0x10000
-
-/******************************************************************************/
-/* PCI registers. */
-/******************************************************************************/
-
-#define PCI_VENDOR_ID_REG               0x00
-#define PCI_DEVICE_ID_REG               0x02
-
-#define PCI_COMMAND_REG                 0x04
-#define PCI_IO_SPACE_ENABLE             0x0001
-#define PCI_MEM_SPACE_ENABLE            0x0002
-#define PCI_BUSMASTER_ENABLE            0x0004
-#define PCI_MEMORY_WRITE_INVALIDATE     0x0010
-#define PCI_PARITY_ERROR_ENABLE         0x0040
-#define PCI_SYSTEM_ERROR_ENABLE         0x0100
-#define PCI_FAST_BACK_TO_BACK_ENABLE    0x0200
-
-#define PCI_STATUS_REG                  0x06
-#define PCI_REV_ID_REG                  0x08
-
-#define PCI_CACHE_LINE_SIZE_REG         0x0c
-
-#define PCI_IO_BASE_ADDR_REG            0x10
-#define PCI_IO_BASE_ADDR_MASK           0xfffffff0
-
-#define PCI_MEM_BASE_ADDR_LOW           0x10
-#define PCI_MEM_BASE_ADDR_HIGH          0x14
-
-#define PCI_SUBSYSTEM_VENDOR_ID_REG     0x2c
-#define PCI_SUBSYSTEM_ID_REG            0x2e
-#define PCI_INT_LINE_REG                0x3c
-
-#define PCIX_CAP_REG                    0x40
-#define PCIX_ENABLE_RELAXED_ORDERING    BIT_17
-
-/******************************************************************************/
-/* Fragment structure. */
-/******************************************************************************/
-
-typedef struct {
-	LM_UINT32 FragSize;
-	LM_PHYSICAL_ADDRESS FragBuf;
-} LM_FRAG, *PLM_FRAG;
-
-typedef struct {
-	/* FragCount is initialized for the caller to the maximum array size, on */
-	/* return FragCount is the number of the actual fragments in the array. */
-	LM_UINT32 FragCount;
-
-	/* Total buffer size. */
-	LM_UINT32 TotalSize;
-
-	/* Fragment array buffer. */
-	LM_FRAG Fragments[1];
-} LM_FRAG_LIST, *PLM_FRAG_LIST;
-
-#define DECLARE_FRAG_LIST_BUFFER_TYPE(_FRAG_LIST_TYPE_NAME, _MAX_FRAG_COUNT) \
-    typedef struct {                                                         \
-	LM_FRAG_LIST FragList;                                               \
-	LM_FRAG FragListBuffer[_MAX_FRAG_COUNT-1];                           \
-    } _FRAG_LIST_TYPE_NAME, *P##_FRAG_LIST_TYPE_NAME
-
-/******************************************************************************/
-/* Status codes. */
-/******************************************************************************/
-
-#define LM_STATUS_SUCCESS                                       0
-#define LM_STATUS_FAILURE                                       1
-
-#define LM_STATUS_INTERRUPT_ACTIVE                              2
-#define LM_STATUS_INTERRUPT_NOT_ACTIVE                          3
-
-#define LM_STATUS_LINK_ACTIVE                                   4
-#define LM_STATUS_LINK_DOWN                                     5
-#define LM_STATUS_LINK_SETTING_MISMATCH                         6
-
-#define LM_STATUS_TOO_MANY_FRAGMENTS                            7
-#define LM_STATUS_TRANSMIT_ABORTED                              8
-#define LM_STATUS_TRANSMIT_ERROR                                9
-#define LM_STATUS_RECEIVE_ABORTED                               10
-#define LM_STATUS_RECEIVE_ERROR                                 11
-#define LM_STATUS_INVALID_PACKET_SIZE                           12
-#define LM_STATUS_OUT_OF_MAP_REGISTERS                          13
-#define LM_STATUS_UNKNOWN_ADAPTER                               14
-
-typedef LM_UINT LM_STATUS, *PLM_STATUS;
-
-/******************************************************************************/
-/* Requested media type. */
-/******************************************************************************/
-
-#define LM_REQUESTED_MEDIA_TYPE_AUTO                            0
-#define LM_REQUESTED_MEDIA_TYPE_BNC                             1
-#define LM_REQUESTED_MEDIA_TYPE_UTP_AUTO                        2
-#define LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS                      3
-#define LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX          4
-#define LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS                     5
-#define LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX         6
-#define LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS                    7
-#define LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX        8
-#define LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS                   9
-#define LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX       10
-#define LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS                  11
-#define LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX      12
-#define LM_REQUESTED_MEDIA_TYPE_MAC_LOOPBACK                    0xfffe
-#define LM_REQUESTED_MEDIA_TYPE_PHY_LOOPBACK                    0xffff
-
-typedef LM_UINT32 LM_REQUESTED_MEDIA_TYPE, *PLM_REQUESTED_MEDIA_TYPE;
-
-/******************************************************************************/
-/* Media type. */
-/******************************************************************************/
-
-#define LM_MEDIA_TYPE_UNKNOWN                                   -1
-#define LM_MEDIA_TYPE_AUTO                                      0
-#define LM_MEDIA_TYPE_UTP                                       1
-#define LM_MEDIA_TYPE_BNC                                       2
-#define LM_MEDIA_TYPE_AUI                                       3
-#define LM_MEDIA_TYPE_FIBER                                     4
-
-typedef LM_UINT32 LM_MEDIA_TYPE, *PLM_MEDIA_TYPE;
-
-/******************************************************************************/
-/* Line speed. */
-/******************************************************************************/
-
-#define LM_LINE_SPEED_UNKNOWN                                   0
-#define LM_LINE_SPEED_10MBPS                                    1
-#define LM_LINE_SPEED_100MBPS                                   2
-#define LM_LINE_SPEED_1000MBPS                                  3
-
-typedef LM_UINT32 LM_LINE_SPEED, *PLM_LINE_SPEED;
-
-/******************************************************************************/
-/* Duplex mode. */
-/******************************************************************************/
-
-#define LM_DUPLEX_MODE_UNKNOWN                                  0
-#define LM_DUPLEX_MODE_HALF                                     1
-#define LM_DUPLEX_MODE_FULL                                     2
-
-typedef LM_UINT32 LM_DUPLEX_MODE, *PLM_DUPLEX_MODE;
-
-/******************************************************************************/
-/* Power state. */
-/******************************************************************************/
-
-#define LM_POWER_STATE_D0       0
-#define LM_POWER_STATE_D1       1
-#define LM_POWER_STATE_D2       2
-#define LM_POWER_STATE_D3       3
-
-typedef LM_UINT32 LM_POWER_STATE, *PLM_POWER_STATE;
-
-/******************************************************************************/
-/* Task offloading. */
-/******************************************************************************/
-
-#define LM_TASK_OFFLOAD_NONE                    0x0000
-#define LM_TASK_OFFLOAD_TX_IP_CHECKSUM          0x0001
-#define LM_TASK_OFFLOAD_RX_IP_CHECKSUM          0x0002
-#define LM_TASK_OFFLOAD_TX_TCP_CHECKSUM         0x0004
-#define LM_TASK_OFFLOAD_RX_TCP_CHECKSUM         0x0008
-#define LM_TASK_OFFLOAD_TX_UDP_CHECKSUM         0x0010
-#define LM_TASK_OFFLOAD_RX_UDP_CHECKSUM         0x0020
-#define LM_TASK_OFFLOAD_TCP_SEGMENTATION        0x0040
-
-typedef LM_UINT32 LM_TASK_OFFLOAD, *PLM_TASK_OFFLOAD;
-
-/******************************************************************************/
-/* Flow control. */
-/******************************************************************************/
-
-#define LM_FLOW_CONTROL_NONE                    0x00
-#define LM_FLOW_CONTROL_RECEIVE_PAUSE           0x01
-#define LM_FLOW_CONTROL_TRANSMIT_PAUSE          0x02
-#define LM_FLOW_CONTROL_RX_TX_PAUSE (LM_FLOW_CONTROL_RECEIVE_PAUSE | \
-    LM_FLOW_CONTROL_TRANSMIT_PAUSE)
-
-/* This value can be or-ed with RECEIVE_PAUSE and TRANSMIT_PAUSE.  If the */
-/* auto-negotiation is disabled and the RECEIVE_PAUSE and TRANSMIT_PAUSE */
-/* bits are set, then flow control is enabled regardless of link partner's */
-/* flow control capability. */
-#define LM_FLOW_CONTROL_AUTO_PAUSE              0x80000000
-
-typedef LM_UINT32 LM_FLOW_CONTROL, *PLM_FLOW_CONTROL;
-
-/******************************************************************************/
-/* Wake up mode. */
-/******************************************************************************/
-
-#define LM_WAKE_UP_MODE_NONE                    0
-#define LM_WAKE_UP_MODE_MAGIC_PACKET            1
-#define LM_WAKE_UP_MODE_NWUF                    2
-#define LM_WAKE_UP_MODE_LINK_CHANGE             4
-
-typedef LM_UINT32 LM_WAKE_UP_MODE, *PLM_WAKE_UP_MODE;
-
-/******************************************************************************/
-/* Counters. */
-/******************************************************************************/
-
-#define LM_COUNTER_FRAMES_XMITTED_OK                            0
-#define LM_COUNTER_FRAMES_RECEIVED_OK                           1
-#define LM_COUNTER_ERRORED_TRANSMIT_COUNT                       2
-#define LM_COUNTER_ERRORED_RECEIVE_COUNT                        3
-#define LM_COUNTER_RCV_CRC_ERROR                                4
-#define LM_COUNTER_ALIGNMENT_ERROR                              5
-#define LM_COUNTER_SINGLE_COLLISION_FRAMES                      6
-#define LM_COUNTER_MULTIPLE_COLLISION_FRAMES                    7
-#define LM_COUNTER_FRAMES_DEFERRED                              8
-#define LM_COUNTER_MAX_COLLISIONS                               9
-#define LM_COUNTER_RCV_OVERRUN                                  10
-#define LM_COUNTER_XMIT_UNDERRUN                                11
-#define LM_COUNTER_UNICAST_FRAMES_XMIT                          12
-#define LM_COUNTER_MULTICAST_FRAMES_XMIT                        13
-#define LM_COUNTER_BROADCAST_FRAMES_XMIT                        14
-#define LM_COUNTER_UNICAST_FRAMES_RCV                           15
-#define LM_COUNTER_MULTICAST_FRAMES_RCV                         16
-#define LM_COUNTER_BROADCAST_FRAMES_RCV                         17
-
-typedef LM_UINT32 LM_COUNTER_TYPE, *PLM_COUNTER_TYPE;
-
-/******************************************************************************/
-/* Forward definition. */
-/******************************************************************************/
-
-typedef struct _LM_DEVICE_BLOCK *PLM_DEVICE_BLOCK;
-typedef struct _LM_PACKET *PLM_PACKET;
-
-/******************************************************************************/
-/* Function prototypes. */
-/******************************************************************************/
-
-LM_STATUS LM_GetAdapterInfo (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_InitializeAdapter (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_ResetAdapter (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_DisableInterrupt (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_EnableInterrupt (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_SendPacket (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS LM_ServiceInterrupts (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_QueueRxPackets (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_SetReceiveMask (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask);
-LM_STATUS LM_Halt (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_Abort (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_MulticastAdd (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
-LM_STATUS LM_MulticastDel (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress);
-LM_STATUS LM_MulticastClear (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_SetMacAddress (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_LoopbackAddress (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pAddress);
-
-LM_UINT32 LM_GetCrcCounter (PLM_DEVICE_BLOCK pDevice);
-
-LM_WAKE_UP_MODE LM_PMCapabilities (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_NwufAdd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
-		      LM_UINT8 * pByteMask, LM_UINT8 * pPattern);
-LM_STATUS LM_NwufRemove (PLM_DEVICE_BLOCK pDevice, LM_UINT32 ByteMaskSize,
-			 LM_UINT8 * pByteMask, LM_UINT8 * pPattern);
-LM_STATUS LM_SetPowerState (PLM_DEVICE_BLOCK pDevice,
-			    LM_POWER_STATE PowerLevel);
-
-LM_VOID LM_ReadPhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
-		    PLM_UINT32 pData32);
-LM_VOID LM_WritePhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg,
-		     LM_UINT32 Data32);
-
-LM_STATUS LM_ControlLoopBack (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Control);
-LM_STATUS LM_SetupPhy (PLM_DEVICE_BLOCK pDevice);
-int LM_BlinkLED (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDuration);
-
-/******************************************************************************/
-/* These are the OS specific functions called by LMAC. */
-/******************************************************************************/
-
-LM_STATUS MM_ReadConfig16 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
-			   LM_UINT16 * pValue16);
-LM_STATUS MM_WriteConfig16 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
-			    LM_UINT16 Value16);
-LM_STATUS MM_ReadConfig32 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
-			   LM_UINT32 * pValue32);
-LM_STATUS MM_WriteConfig32 (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset,
-			    LM_UINT32 Value32);
-LM_STATUS MM_MapMemBase (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_MapIoBase (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_IndicateRxPackets (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_IndicateTxPackets (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_StartTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS MM_CompleteTxDma (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS MM_AllocateMemory (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlockSize,
-			     PLM_VOID * pMemoryBlockVirt);
-LM_STATUS MM_AllocateSharedMemory (PLM_DEVICE_BLOCK pDevice,
-				   LM_UINT32 BlockSize,
-				   PLM_VOID * pMemoryBlockVirt,
-				   PLM_PHYSICAL_ADDRESS pMemoryBlockPhy,
-				   LM_BOOL Cached);
-LM_STATUS MM_GetConfig (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_IndicateStatus (PLM_DEVICE_BLOCK pDevice, LM_STATUS Status);
-LM_STATUS MM_InitializeUmPackets (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS MM_FreeRxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS MM_CoalesceTxBuffer (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket);
-LM_STATUS LM_MbufWorkAround (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_SetLinkSpeed (PLM_DEVICE_BLOCK pDevice,
-			   LM_REQUESTED_MEDIA_TYPE RequestedMediaType);
-
-#if INCLUDE_5703_A0_FIX
-LM_STATUS LM_Load5703DmaWFirmware (PLM_DEVICE_BLOCK pDevice);
-#endif
-
-#endif				/* LM_H */
diff --git a/drivers/net/bcm570x_mm.h b/drivers/net/bcm570x_mm.h
deleted file mode 100644
index ff5302f..0000000
--- a/drivers/net/bcm570x_mm.h
+++ /dev/null
@@ -1,158 +0,0 @@
-
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/******************************************************************************/
-
-#ifndef MM_H
-#define MM_H
-
-#define __raw_readl readl
-#define __raw_writel writel
-
-#define BIG_ENDIAN_HOST 1
-#define readl(addr) (*(volatile unsigned int*)(addr))
-#define writel(b,addr) ((*(volatile unsigned int *) (addr)) = (b))
-
-/* Define memory barrier function here if needed */
-#define wmb()
-#define membar()
-#include <common.h>
-#include <asm/types.h>
-#include "bcm570x_lm.h"
-#include "bcm570x_queue.h"
-#include "tigon3.h"
-#include <pci.h>
-
-#define FALSE 0
-#define TRUE  1
-#define ERROR -1
-
-#if DBG
-#define STATIC
-#else
-#define STATIC static
-#endif
-
-extern int MM_Packet_Desc_Size;
-
-#define MM_PACKET_DESC_SIZE MM_Packet_Desc_Size
-
-DECLARE_QUEUE_TYPE (UM_RX_PACKET_Q, MAX_RX_PACKET_DESC_COUNT + 1);
-
-#define MAX_MEM 16
-
-/* Synch */
-typedef int mutex_t;
-typedef int spinlock_t;
-
-/* Embedded device control */
-typedef struct _UM_DEVICE_BLOCK {
-	LM_DEVICE_BLOCK lm_dev;
-	pci_dev_t pdev;
-	char *name;
-	void *mem_list[MAX_MEM];
-	dma_addr_t dma_list[MAX_MEM];
-	int mem_size_list[MAX_MEM];
-	int mem_list_num;
-	int mtu;
-	int index;
-	int opened;
-	int delayed_link_ind;	/* Delay link status during initial load */
-	int adapter_just_inited;	/* the first few seconds after init. */
-	int spurious_int;	/* new -- unsupported */
-	int timer_interval;
-	int adaptive_expiry;
-	int crc_counter_expiry;	/* new -- unsupported */
-	int poll_tib_expiry;	/* new -- unsupported */
-	int tx_full;
-	int tx_queued;
-	int line_speed;		/* in Mbps, 0 if link is down */
-	UM_RX_PACKET_Q rx_out_of_buf_q;
-	int rx_out_of_buf;
-	int rx_low_buf_thresh;	/* changed to rx_buf_repl_thresh */
-	int rx_buf_repl_panic_thresh;
-	int rx_buf_align;	/* new -- unsupported */
-	int do_global_lock;
-	mutex_t global_lock;
-	mutex_t undi_lock;
-	long undi_flags;
-	volatile int interrupt;
-	int tasklet_pending;
-	int tasklet_busy;	/* new -- unsupported */
-	int rx_pkt;
-	int tx_pkt;
-#ifdef NICE_SUPPORT		/* unsupported, this is a linux ioctl */
-	void (*nice_rx) (void *, void *);
-	void *nice_ctx;
-#endif				/* NICE_SUPPORT */
-	int rx_adaptive_coalesce;
-	unsigned int rx_last_cnt;
-	unsigned int tx_last_cnt;
-	unsigned int rx_curr_coalesce_frames;
-	unsigned int rx_curr_coalesce_ticks;
-	unsigned int tx_curr_coalesce_frames;	/* new -- unsupported */
-#if TIGON3_DEBUG		/* new -- unsupported */
-	uint tx_zc_count;
-	uint tx_chksum_count;
-	uint tx_himem_count;
-	uint rx_good_chksum_count;
-#endif
-	unsigned int rx_bad_chksum_count;	/* new -- unsupported */
-	unsigned int rx_misc_errors;	/* new -- unsupported */
-} UM_DEVICE_BLOCK, *PUM_DEVICE_BLOCK;
-
-/* Physical/PCI DMA address */
-typedef union {
-	dma_addr_t dma_map;
-} dma_map_t;
-
-/* Packet */
-typedef struct
-    _UM_PACKET {
-	LM_PACKET lm_packet;
-	void *skbuff;		/* Address of packet buffer */
-} UM_PACKET, *PUM_PACKET;
-
-#define MM_ACQUIRE_UNDI_LOCK(_pDevice)
-#define MM_RELEASE_UNDI_LOCK(_pDevice)
-#define MM_ACQUIRE_INT_LOCK(_pDevice)
-#define MM_RELEASE_INT_LOCK(_pDevice)
-#define MM_UINT_PTR(_ptr)   ((unsigned long) (_ptr))
-
-/* Macro for setting 64bit address struct */
-#define set_64bit_addr(paddr, low, high) \
-	(paddr)->Low = low;             \
-	(paddr)->High = high;
-
-/* Assume that PCI controller's view of host memory is same as host */
-
-#define MEM_TO_PCI_PHYS(addr) (addr)
-
-extern void MM_SetAddr (LM_PHYSICAL_ADDRESS * paddr, dma_addr_t addr);
-extern void MM_SetT3Addr (T3_64BIT_HOST_ADDR * paddr, dma_addr_t addr);
-extern void MM_MapTxDma (PLM_DEVICE_BLOCK pDevice,
-			 struct _LM_PACKET *pPacket, T3_64BIT_HOST_ADDR * paddr,
-			 LM_UINT32 * len, int frag);
-extern void MM_MapRxDma (PLM_DEVICE_BLOCK pDevice,
-			 struct _LM_PACKET *pPacket,
-			 T3_64BIT_HOST_ADDR * paddr);
-
-/* BSP needs to provide sysUsecDelay and sysSerialPrintString */
-extern void sysSerialPrintString (char *s);
-#define MM_Wait(usec) udelay(usec)
-
-/* Define memory barrier function here if needed */
-#define wmb()
-
-#if 0
-#define cpu_to_le32(val) LONGSWAP(val)
-#endif
-#endif				/* MM_H */
diff --git a/drivers/net/bcm570x_queue.h b/drivers/net/bcm570x_queue.h
deleted file mode 100644
index 336b3ca..0000000
--- a/drivers/net/bcm570x_queue.h
+++ /dev/null
@@ -1,387 +0,0 @@
-
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/* Queue functions.                                                           */
-/*    void          QQ_InitQueue(PQQ_CONTAINER pQueue)                        */
-/*    char          QQ_Full(PQQ_CONTAINER pQueue)                             */
-/*    char          QQ_Empty(PQQ_CONTAINER pQueue)                            */
-/*    unsigned int QQ_GetSize(PQQ_CONTAINER pQueue)                          */
-/*    unsigned int QQ_GetEntryCnt(PQQ_CONTAINER pQueue)                      */
-/*    char          QQ_PushHead(PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry)       */
-/*    char          QQ_PushTail(PQQ_CONTAINER pQueue, PQQ_ENTRY pEntry)       */
-/*    PQQ_ENTRY     QQ_PopHead(PQQ_CONTAINER pQueue)                          */
-/*    PQQ_ENTRY     QQ_PopTail(PQQ_CONTAINER pQueue)                          */
-/*    PQQ_ENTRY     QQ_GetHead(PQQ_CONTAINER pQueue, unsigned int Idx)       */
-/*    PQQ_ENTRY     QQ_GetTail(PQQ_CONTAINER pQueue, unsigned int Idx)       */
-/*                                                                            */
-/*                                                                            */
-/* History:                                                                   */
-/*    02/25/00 Hav Khauv        Initial version.                              */
-/******************************************************************************/
-
-#ifndef BCM_QUEUE_H
-#define BCM_QUEUE_H
-#ifndef EMBEDDED
-#define EMBEDDED 1
-#endif
-
-/******************************************************************************/
-/* Queue definitions. */
-/******************************************************************************/
-
-/* Entry for queueing. */
-typedef void *PQQ_ENTRY;
-
-/* Linux Atomic Ops support */
-typedef struct { int counter; } atomic_t;
-
-
-/*
- * This combination of `inline' and `extern' has almost the effect of a
- * macro.  The way to use it is to put a function definition in a header
- * file with these keywords, and put another copy of the definition
- * (lacking `inline' and `extern') in a library file.  The definition in
- * the header file will cause most calls to the function to be inlined.
- * If any uses of the function remain, they will refer to the single copy
- * in the library.
- */
-extern __inline void
-atomic_set(atomic_t* entry, int val)
-{
-    entry->counter = val;
-}
-extern __inline int
-atomic_read(atomic_t* entry)
-{
-    return entry->counter;
-}
-extern __inline void
-atomic_inc(atomic_t* entry)
-{
-    if(entry)
-	entry->counter++;
-}
-
-extern __inline void
-atomic_dec(atomic_t* entry)
-{
-    if(entry)
-	entry->counter--;
-}
-
-extern __inline void
-atomic_sub(int a, atomic_t* entry)
-{
-    if(entry)
-	entry->counter -= a;
-}
-extern __inline void
-atomic_add(int a, atomic_t* entry)
-{
-    if(entry)
-	entry->counter += a;
-}
-
-
-/* Queue header -- base type. */
-typedef struct {
-    unsigned int Head;
-    unsigned int Tail;
-    unsigned int Size;
-    atomic_t EntryCnt;
-    PQQ_ENTRY Array[1];
-} QQ_CONTAINER, *PQQ_CONTAINER;
-
-
-/* Declare queue type macro. */
-#define DECLARE_QUEUE_TYPE(_QUEUE_TYPE, _QUEUE_SIZE)            \
-								\
-    typedef struct {                                            \
-	QQ_CONTAINER Container;                                 \
-	PQQ_ENTRY EntryBuffer[_QUEUE_SIZE];                     \
-    } _QUEUE_TYPE, *P##_QUEUE_TYPE
-
-
-/******************************************************************************/
-/* Compilation switches. */
-/******************************************************************************/
-
-#if DBG
-#undef QQ_NO_OVERFLOW_CHECK
-#undef QQ_NO_UNDERFLOW_CHECK
-#endif /* DBG */
-
-#ifdef QQ_USE_MACROS
-/* notdone */
-#else
-
-#ifdef QQ_NO_INLINE
-#define __inline
-#endif /* QQ_NO_INLINE */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-extern __inline void
-QQ_InitQueue(
-PQQ_CONTAINER pQueue,
-unsigned int QueueSize) {
-    pQueue->Head = 0;
-    pQueue->Tail = 0;
-    pQueue->Size = QueueSize+1;
-    atomic_set(&pQueue->EntryCnt, 0);
-} /* QQ_InitQueue */
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-extern __inline char
-QQ_Full(
-PQQ_CONTAINER pQueue) {
-    unsigned int NewHead;
-
-    NewHead = (pQueue->Head + 1) % pQueue->Size;
-
-    return(NewHead == pQueue->Tail);
-} /* QQ_Full */
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-extern __inline char
-QQ_Empty(
-PQQ_CONTAINER pQueue) {
-    return(pQueue->Head == pQueue->Tail);
-} /* QQ_Empty */
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-extern __inline unsigned int
-QQ_GetSize(
-PQQ_CONTAINER pQueue) {
-    return pQueue->Size;
-} /* QQ_GetSize */
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-extern __inline unsigned int
-QQ_GetEntryCnt(
-PQQ_CONTAINER pQueue) {
-    return atomic_read(&pQueue->EntryCnt);
-} /* QQ_GetEntryCnt */
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/*    TRUE entry was added successfully.                                      */
-/*    FALSE queue is full.                                                    */
-/******************************************************************************/
-extern __inline char
-QQ_PushHead(
-PQQ_CONTAINER pQueue,
-PQQ_ENTRY pEntry) {
-    unsigned int Head;
-
-    Head = (pQueue->Head + 1) % pQueue->Size;
-
-#if !defined(QQ_NO_OVERFLOW_CHECK)
-    if(Head == pQueue->Tail) {
-	return 0;
-    } /* if */
-#endif /* QQ_NO_OVERFLOW_CHECK */
-
-    pQueue->Array[pQueue->Head] = pEntry;
-    wmb();
-    pQueue->Head = Head;
-    atomic_inc(&pQueue->EntryCnt);
-
-    return -1;
-} /* QQ_PushHead */
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/*    TRUE entry was added successfully.                                      */
-/*    FALSE queue is full.                                                    */
-/******************************************************************************/
-extern __inline char
-QQ_PushTail(
-PQQ_CONTAINER pQueue,
-PQQ_ENTRY pEntry) {
-    unsigned int Tail;
-
-    Tail = pQueue->Tail;
-    if(Tail == 0) {
-	Tail = pQueue->Size;
-    } /* if */
-    Tail--;
-
-#if !defined(QQ_NO_OVERFLOW_CHECK)
-    if(Tail == pQueue->Head) {
-	return 0;
-    } /* if */
-#endif /* QQ_NO_OVERFLOW_CHECK */
-
-    pQueue->Array[Tail] = pEntry;
-    wmb();
-    pQueue->Tail = Tail;
-    atomic_inc(&pQueue->EntryCnt);
-
-    return -1;
-} /* QQ_PushTail */
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-extern __inline PQQ_ENTRY
-QQ_PopHead(
-PQQ_CONTAINER pQueue) {
-    unsigned int Head;
-    PQQ_ENTRY Entry;
-
-    Head = pQueue->Head;
-
-#if !defined(QQ_NO_UNDERFLOW_CHECK)
-    if(Head == pQueue->Tail) {
-	return (PQQ_ENTRY) 0;
-    } /* if */
-#endif /* QQ_NO_UNDERFLOW_CHECK */
-
-    if(Head == 0) {
-	Head = pQueue->Size;
-    } /* if */
-    Head--;
-
-    Entry = pQueue->Array[Head];
-#ifdef EMBEDDED
-    membar();
-#else
-    mb();
-#endif
-    pQueue->Head = Head;
-    atomic_dec(&pQueue->EntryCnt);
-
-    return Entry;
-} /* QQ_PopHead */
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-extern __inline PQQ_ENTRY
-QQ_PopTail(
-PQQ_CONTAINER pQueue) {
-    unsigned int Tail;
-    PQQ_ENTRY Entry;
-
-    Tail = pQueue->Tail;
-
-#if !defined(QQ_NO_UNDERFLOW_CHECK)
-    if(Tail == pQueue->Head) {
-	return (PQQ_ENTRY) 0;
-    } /* if */
-#endif /* QQ_NO_UNDERFLOW_CHECK */
-
-    Entry = pQueue->Array[Tail];
-#ifdef EMBEDDED
-    membar();
-#else
-    mb();
-#endif
-    pQueue->Tail = (Tail + 1) % pQueue->Size;
-    atomic_dec(&pQueue->EntryCnt);
-
-    return Entry;
-} /* QQ_PopTail */
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-extern __inline PQQ_ENTRY
-QQ_GetHead(
-    PQQ_CONTAINER pQueue,
-    unsigned int Idx)
-{
-    if(Idx >= atomic_read(&pQueue->EntryCnt))
-    {
-	return (PQQ_ENTRY) 0;
-    }
-
-    if(pQueue->Head > Idx)
-    {
-	Idx = pQueue->Head - Idx;
-    }
-    else
-    {
-	Idx = pQueue->Size - (Idx - pQueue->Head);
-    }
-    Idx--;
-
-    return pQueue->Array[Idx];
-}
-
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-extern __inline PQQ_ENTRY
-QQ_GetTail(
-    PQQ_CONTAINER pQueue,
-    unsigned int Idx)
-{
-    if(Idx >= atomic_read(&pQueue->EntryCnt))
-    {
-	return (PQQ_ENTRY) 0;
-    }
-
-    Idx += pQueue->Tail;
-    if(Idx >= pQueue->Size)
-    {
-	Idx = Idx - pQueue->Size;
-    }
-
-    return pQueue->Array[Idx];
-}
-
-#endif /* QQ_USE_MACROS */
-
-
-#endif /* QUEUE_H */
diff --git a/drivers/net/tigon3.c b/drivers/net/tigon3.c
deleted file mode 100644
index 33cb447..0000000
--- a/drivers/net/tigon3.c
+++ /dev/null
@@ -1,5697 +0,0 @@
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/* History:                                                                   */
-/******************************************************************************/
-#include <common.h>
-#include <asm/types.h>
-
-#ifdef CONFIG_BMW
-#include <mpc824x.h>
-#endif
-#include <malloc.h>
-#include <linux/byteorder/big_endian.h>
-#include "bcm570x_mm.h"
-
-#define EMBEDDED 1
-/******************************************************************************/
-/* Local functions. */
-/******************************************************************************/
-
-LM_STATUS LM_Abort (PLM_DEVICE_BLOCK pDevice);
-LM_STATUS LM_QueueRxPackets (PLM_DEVICE_BLOCK pDevice);
-
-static LM_STATUS LM_TranslateRequestedMediaType (LM_REQUESTED_MEDIA_TYPE
-						 RequestedMediaType,
-						 PLM_MEDIA_TYPE pMediaType,
-						 PLM_LINE_SPEED pLineSpeed,
-						 PLM_DUPLEX_MODE pDuplexMode);
-
-static LM_STATUS LM_InitBcm540xPhy (PLM_DEVICE_BLOCK pDevice);
-
-__inline static LM_VOID LM_ServiceRxInterrupt (PLM_DEVICE_BLOCK pDevice);
-__inline static LM_VOID LM_ServiceTxInterrupt (PLM_DEVICE_BLOCK pDevice);
-
-static LM_STATUS LM_ForceAutoNegBcm540xPhy (PLM_DEVICE_BLOCK pDevice,
-					    LM_REQUESTED_MEDIA_TYPE
-					    RequestedMediaType);
-static LM_STATUS LM_ForceAutoNeg (PLM_DEVICE_BLOCK pDevice,
-				  LM_REQUESTED_MEDIA_TYPE RequestedMediaType);
-static LM_UINT32 GetPhyAdFlowCntrlSettings (PLM_DEVICE_BLOCK pDevice);
-STATIC LM_STATUS LM_SetFlowControl (PLM_DEVICE_BLOCK pDevice,
-				    LM_UINT32 LocalPhyAd,
-				    LM_UINT32 RemotePhyAd);
-#if INCLUDE_TBI_SUPPORT
-STATIC LM_STATUS LM_SetupFiberPhy (PLM_DEVICE_BLOCK pDevice);
-STATIC LM_STATUS LM_InitBcm800xPhy (PLM_DEVICE_BLOCK pDevice);
-#endif
-STATIC LM_STATUS LM_SetupCopperPhy (PLM_DEVICE_BLOCK pDevice);
-STATIC PLM_ADAPTER_INFO LM_GetAdapterInfoBySsid (LM_UINT16 Svid,
-						 LM_UINT16 Ssid);
-STATIC LM_STATUS LM_DmaTest (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt,
-			     LM_PHYSICAL_ADDRESS BufferPhy,
-			     LM_UINT32 BufferSize);
-STATIC LM_STATUS LM_HaltCpu (PLM_DEVICE_BLOCK pDevice, LM_UINT32 cpu_number);
-STATIC LM_STATUS LM_ResetChip (PLM_DEVICE_BLOCK pDevice);
-STATIC LM_STATUS LM_Test4GBoundary (PLM_DEVICE_BLOCK pDevice,
-				    PLM_PACKET pPacket, PT3_SND_BD pSendBd);
-
-/******************************************************************************/
-/* External functions. */
-/******************************************************************************/
-
-LM_STATUS LM_LoadRlsFirmware (PLM_DEVICE_BLOCK pDevice);
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_UINT32 LM_RegRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register)
-{
-	LM_UINT32 Value32;
-
-#if PCIX_TARGET_WORKAROUND
-	MM_ACQUIRE_UNDI_LOCK (pDevice);
-#endif
-	MM_WriteConfig32 (pDevice, T3_PCI_REG_ADDR_REG, Register);
-	MM_ReadConfig32 (pDevice, T3_PCI_REG_DATA_REG, &Value32);
-#if PCIX_TARGET_WORKAROUND
-	MM_RELEASE_UNDI_LOCK (pDevice);
-#endif
-
-	return Value32;
-}				/* LM_RegRdInd */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_VOID
-LM_RegWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register, LM_UINT32 Value32)
-{
-
-#if PCIX_TARGET_WORKAROUND
-	MM_ACQUIRE_UNDI_LOCK (pDevice);
-#endif
-	MM_WriteConfig32 (pDevice, T3_PCI_REG_ADDR_REG, Register);
-	MM_WriteConfig32 (pDevice, T3_PCI_REG_DATA_REG, Value32);
-#if PCIX_TARGET_WORKAROUND
-	MM_RELEASE_UNDI_LOCK (pDevice);
-#endif
-}				/* LM_RegWrInd */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_UINT32 LM_MemRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr)
-{
-	LM_UINT32 Value32;
-
-	MM_ACQUIRE_UNDI_LOCK (pDevice);
-#ifdef BIG_ENDIAN_HOST
-	MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr);
-	Value32 = REG_RD (pDevice, PciCfg.MemWindowData);
-	/*    Value32 = REG_RD(pDevice,uIntMem.Mbuf[(MemAddr & 0x7fff)/4]); */
-#else
-	MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr);
-	MM_ReadConfig32 (pDevice, T3_PCI_MEM_WIN_DATA_REG, &Value32);
-#endif
-	MM_RELEASE_UNDI_LOCK (pDevice);
-
-	return Value32;
-}				/* LM_MemRdInd */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_VOID
-LM_MemWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr, LM_UINT32 Value32)
-{
-	MM_ACQUIRE_UNDI_LOCK (pDevice);
-#ifdef BIG_ENDIAN_HOST
-	REG_WR (pDevice, PciCfg.MemWindowBaseAddr, MemAddr);
-	REG_WR (pDevice, uIntMem.Mbuf[(MemAddr & 0x7fff) / 4], Value32);
-#else
-	MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, MemAddr);
-	MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_DATA_REG, Value32);
-#endif
-	MM_RELEASE_UNDI_LOCK (pDevice);
-}				/* LM_MemWrInd */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_STATUS LM_QueueRxPackets (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_STATUS Lmstatus;
-	PLM_PACKET pPacket;
-	PT3_RCV_BD pRcvBd;
-	LM_UINT32 StdBdAdded = 0;
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	LM_UINT32 JumboBdAdded = 0;
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-	Lmstatus = LM_STATUS_SUCCESS;
-
-	pPacket = (PLM_PACKET) QQ_PopHead (&pDevice->RxPacketFreeQ.Container);
-	while (pPacket) {
-		switch (pPacket->u.Rx.RcvProdRing) {
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-		case T3_JUMBO_RCV_PROD_RING:	/* Jumbo Receive Ring. */
-			/* Initialize the buffer descriptor. */
-			pRcvBd =
-			    &pDevice->pRxJumboBdVirt[pDevice->RxJumboProdIdx];
-			pRcvBd->Flags =
-			    RCV_BD_FLAG_END | RCV_BD_FLAG_JUMBO_RING;
-			pRcvBd->Len = (LM_UINT16) pDevice->RxJumboBufferSize;
-
-			/* Initialize the receive buffer pointer */
-#if 0				/* Jimmy, deleted in new */
-			pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low;
-			pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High;
-#endif
-			MM_MapRxDma (pDevice, pPacket, &pRcvBd->HostAddr);
-
-			/* The opaque field may point to an offset from a fix addr. */
-			pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR (pPacket) -
-						      MM_UINT_PTR (pDevice->
-								   pPacketDescBase));
-
-			/* Update the producer index. */
-			pDevice->RxJumboProdIdx =
-			    (pDevice->RxJumboProdIdx +
-			     1) & T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK;
-
-			JumboBdAdded++;
-			break;
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-		case T3_STD_RCV_PROD_RING:	/* Standard Receive Ring. */
-			/* Initialize the buffer descriptor. */
-			pRcvBd = &pDevice->pRxStdBdVirt[pDevice->RxStdProdIdx];
-			pRcvBd->Flags = RCV_BD_FLAG_END;
-			pRcvBd->Len = MAX_STD_RCV_BUFFER_SIZE;
-
-			/* Initialize the receive buffer pointer */
-#if 0				/* Jimmy, deleted in new replaced with MM_MapRxDma */
-			pRcvBd->HostAddr.Low = pPacket->u.Rx.RxBufferPhy.Low;
-			pRcvBd->HostAddr.High = pPacket->u.Rx.RxBufferPhy.High;
-#endif
-			MM_MapRxDma (pDevice, pPacket, &pRcvBd->HostAddr);
-
-			/* The opaque field may point to an offset from a fix addr. */
-			pRcvBd->Opaque = (LM_UINT32) (MM_UINT_PTR (pPacket) -
-						      MM_UINT_PTR (pDevice->
-								   pPacketDescBase));
-
-			/* Update the producer index. */
-			pDevice->RxStdProdIdx = (pDevice->RxStdProdIdx + 1) &
-			    T3_STD_RCV_RCB_ENTRY_COUNT_MASK;
-
-			StdBdAdded++;
-			break;
-
-		case T3_UNKNOWN_RCV_PROD_RING:
-		default:
-			Lmstatus = LM_STATUS_FAILURE;
-			break;
-		}		/* switch */
-
-		/* Bail out if there is any error. */
-		if (Lmstatus != LM_STATUS_SUCCESS) {
-			break;
-		}
-
-		pPacket =
-		    (PLM_PACKET) QQ_PopHead (&pDevice->RxPacketFreeQ.Container);
-	}			/* while */
-
-	wmb ();
-	/* Update the procedure index. */
-	if (StdBdAdded) {
-		MB_REG_WR (pDevice, Mailbox.RcvStdProdIdx.Low,
-			   pDevice->RxStdProdIdx);
-	}
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	if (JumboBdAdded) {
-		MB_REG_WR (pDevice, Mailbox.RcvJumboProdIdx.Low,
-			   pDevice->RxJumboProdIdx);
-	}
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-	return Lmstatus;
-}				/* LM_QueueRxPackets */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-STATIC LM_VOID LM_NvramInit (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_UINT32 Value32;
-	LM_UINT32 j;
-
-	/* Intialize clock period and state machine. */
-	Value32 = SEEPROM_ADDR_CLK_PERD (SEEPROM_CLOCK_PERIOD) |
-	    SEEPROM_ADDR_FSM_RESET;
-	REG_WR (pDevice, Grc.EepromAddr, Value32);
-
-	for (j = 0; j < 100; j++) {
-		MM_Wait (10);
-	}
-
-	/* Serial eeprom access using the Grc.EepromAddr/EepromData registers. */
-	Value32 = REG_RD (pDevice, Grc.LocalCtrl);
-	REG_WR (pDevice, Grc.LocalCtrl,
-		Value32 | GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM);
-
-	/* Set the 5701 compatibility mode if we are using EEPROM. */
-	if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
-	    T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5701) {
-		Value32 = REG_RD (pDevice, Nvram.Config1);
-		if ((Value32 & FLASH_INTERFACE_ENABLE) == 0) {
-			/* Use the new interface to read EEPROM. */
-			Value32 &= ~FLASH_COMPAT_BYPASS;
-
-			REG_WR (pDevice, Nvram.Config1, Value32);
-		}
-	}
-}				/* LM_NvRamInit */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_EepromRead (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT32 * pData)
-{
-	LM_UINT32 Value32;
-	LM_UINT32 Addr;
-	LM_UINT32 Dev;
-	LM_UINT32 j;
-
-	if (Offset > SEEPROM_CHIP_SIZE) {
-		return LM_STATUS_FAILURE;
-	}
-
-	Dev = Offset / SEEPROM_CHIP_SIZE;
-	Addr = Offset % SEEPROM_CHIP_SIZE;
-
-	Value32 = REG_RD (pDevice, Grc.EepromAddr);
-	Value32 &= ~(SEEPROM_ADDR_ADDRESS_MASK | SEEPROM_ADDR_DEV_ID_MASK |
-		     SEEPROM_ADDR_RW_MASK);
-	REG_WR (pDevice, Grc.EepromAddr, Value32 | SEEPROM_ADDR_DEV_ID (Dev) |
-		SEEPROM_ADDR_ADDRESS (Addr) | SEEPROM_ADDR_START |
-		SEEPROM_ADDR_READ);
-
-	for (j = 0; j < 1000; j++) {
-		Value32 = REG_RD (pDevice, Grc.EepromAddr);
-		if (Value32 & SEEPROM_ADDR_COMPLETE) {
-			break;
-		}
-		MM_Wait (10);
-	}
-
-	if (Value32 & SEEPROM_ADDR_COMPLETE) {
-		Value32 = REG_RD (pDevice, Grc.EepromData);
-		*pData = Value32;
-
-		return LM_STATUS_SUCCESS;
-	}
-
-	return LM_STATUS_FAILURE;
-}				/* LM_EepromRead */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-STATIC LM_STATUS
-LM_NvramRead (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Offset, LM_UINT32 * pData)
-{
-	LM_UINT32 Value32;
-	LM_STATUS Status;
-	LM_UINT32 j;
-
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-	    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-		Status = LM_EepromRead (pDevice, Offset, pData);
-	} else {
-		/* Determine if we have flash or EEPROM. */
-		Value32 = REG_RD (pDevice, Nvram.Config1);
-		if (Value32 & FLASH_INTERFACE_ENABLE) {
-			if (Value32 & FLASH_SSRAM_BUFFERRED_MODE) {
-				Offset = ((Offset / BUFFERED_FLASH_PAGE_SIZE) <<
-					  BUFFERED_FLASH_PAGE_POS) +
-				    (Offset % BUFFERED_FLASH_PAGE_SIZE);
-			}
-		}
-
-		REG_WR (pDevice, Nvram.SwArb, SW_ARB_REQ_SET1);
-		for (j = 0; j < 1000; j++) {
-			if (REG_RD (pDevice, Nvram.SwArb) & SW_ARB_GNT1) {
-				break;
-			}
-			MM_Wait (20);
-		}
-		if (j == 1000) {
-			return LM_STATUS_FAILURE;
-		}
-
-		/* Read from flash or EEPROM with the new 5703/02 interface. */
-		REG_WR (pDevice, Nvram.Addr, Offset & NVRAM_ADDRESS_MASK);
-
-		REG_WR (pDevice, Nvram.Cmd, NVRAM_CMD_RD | NVRAM_CMD_DO_IT |
-			NVRAM_CMD_FIRST | NVRAM_CMD_LAST | NVRAM_CMD_DONE);
-
-		/* Wait for the done bit to clear. */
-		for (j = 0; j < 500; j++) {
-			MM_Wait (10);
-
-			Value32 = REG_RD (pDevice, Nvram.Cmd);
-			if (!(Value32 & NVRAM_CMD_DONE)) {
-				break;
-			}
-		}
-
-		/* Wait for the done bit. */
-		if (!(Value32 & NVRAM_CMD_DONE)) {
-			for (j = 0; j < 500; j++) {
-				MM_Wait (10);
-
-				Value32 = REG_RD (pDevice, Nvram.Cmd);
-				if (Value32 & NVRAM_CMD_DONE) {
-					MM_Wait (10);
-
-					*pData =
-					    REG_RD (pDevice, Nvram.ReadData);
-
-					/* Change the endianess. */
-					*pData =
-					    ((*pData & 0xff) << 24) |
-					    ((*pData & 0xff00) << 8) |
-					    ((*pData & 0xff0000) >> 8) |
-					    ((*pData >> 24) & 0xff);
-
-					break;
-				}
-			}
-		}
-
-		REG_WR (pDevice, Nvram.SwArb, SW_ARB_REQ_CLR1);
-		if (Value32 & NVRAM_CMD_DONE) {
-			Status = LM_STATUS_SUCCESS;
-		} else {
-			Status = LM_STATUS_FAILURE;
-		}
-	}
-
-	return Status;
-}				/* LM_NvramRead */
-
-STATIC void LM_ReadVPD (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_UINT32 Vpd_arr[256 / 4];
-	LM_UINT8 *Vpd = (LM_UINT8 *) & Vpd_arr[0];
-	LM_UINT32 *Vpd_dptr = &Vpd_arr[0];
-	LM_UINT32 Value32;
-	unsigned int j;
-
-	/* Read PN from VPD */
-	for (j = 0; j < 256; j += 4, Vpd_dptr++) {
-		if (LM_NvramRead (pDevice, 0x100 + j, &Value32) !=
-		    LM_STATUS_SUCCESS) {
-			printf ("BCM570x: LM_ReadVPD: VPD read failed"
-				" (no EEPROM onboard)\n");
-			return;
-		}
-		*Vpd_dptr = cpu_to_le32 (Value32);
-	}
-	for (j = 0; j < 256;) {
-		unsigned int Vpd_r_len;
-		unsigned int Vpd_r_end;
-
-		if ((Vpd[j] == 0x82) || (Vpd[j] == 0x91)) {
-			j = j + 3 + Vpd[j + 1] + (Vpd[j + 2] << 8);
-		} else if (Vpd[j] == 0x90) {
-			Vpd_r_len = Vpd[j + 1] + (Vpd[j + 2] << 8);
-			j += 3;
-			Vpd_r_end = Vpd_r_len + j;
-			while (j < Vpd_r_end) {
-				if ((Vpd[j] == 'P') && (Vpd[j + 1] == 'N')) {
-					unsigned int len = Vpd[j + 2];
-
-					if (len <= 24) {
-						memcpy (pDevice->PartNo,
-							&Vpd[j + 3], len);
-					}
-					break;
-				} else {
-					if (Vpd[j + 2] == 0) {
-						break;
-					}
-					j = j + Vpd[j + 2];
-				}
-			}
-			break;
-		} else {
-			break;
-		}
-	}
-}
-
-STATIC void LM_ReadBootCodeVersion (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_UINT32 Value32, offset, ver_offset;
-	int i;
-
-	if (LM_NvramRead (pDevice, 0x0, &Value32) != LM_STATUS_SUCCESS)
-		return;
-	if (Value32 != 0xaa559966)
-		return;
-	if (LM_NvramRead (pDevice, 0xc, &offset) != LM_STATUS_SUCCESS)
-		return;
-
-	offset = ((offset & 0xff) << 24) | ((offset & 0xff00) << 8) |
-	    ((offset & 0xff0000) >> 8) | ((offset >> 24) & 0xff);
-	if (LM_NvramRead (pDevice, offset, &Value32) != LM_STATUS_SUCCESS)
-		return;
-	if ((Value32 == 0x0300000e) &&
-	    (LM_NvramRead (pDevice, offset + 4, &Value32) == LM_STATUS_SUCCESS)
-	    && (Value32 == 0)) {
-
-		if (LM_NvramRead (pDevice, offset + 8, &ver_offset) !=
-		    LM_STATUS_SUCCESS)
-			return;
-		ver_offset = ((ver_offset & 0xff0000) >> 8) |
-		    ((ver_offset >> 24) & 0xff);
-		for (i = 0; i < 16; i += 4) {
-			if (LM_NvramRead
-			    (pDevice, offset + ver_offset + i,
-			     &Value32) != LM_STATUS_SUCCESS) {
-				return;
-			}
-			*((LM_UINT32 *) & pDevice->BootCodeVer[i]) =
-			    cpu_to_le32 (Value32);
-		}
-	} else {
-		char c;
-
-		if (LM_NvramRead (pDevice, 0x94, &Value32) != LM_STATUS_SUCCESS)
-			return;
-
-		i = 0;
-		c = ((Value32 & 0xff0000) >> 16);
-
-		if (c < 10) {
-			pDevice->BootCodeVer[i++] = c + '0';
-		} else {
-			pDevice->BootCodeVer[i++] = (c / 10) + '0';
-			pDevice->BootCodeVer[i++] = (c % 10) + '0';
-		}
-		pDevice->BootCodeVer[i++] = '.';
-		c = (Value32 & 0xff000000) >> 24;
-		if (c < 10) {
-			pDevice->BootCodeVer[i++] = c + '0';
-		} else {
-			pDevice->BootCodeVer[i++] = (c / 10) + '0';
-			pDevice->BootCodeVer[i++] = (c % 10) + '0';
-		}
-		pDevice->BootCodeVer[i] = 0;
-	}
-}
-
-STATIC void LM_GetBusSpeed (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_UINT32 PciState = pDevice->PciState;
-	LM_UINT32 ClockCtrl;
-	char *SpeedStr = "";
-
-	if (PciState & T3_PCI_STATE_32BIT_PCI_BUS) {
-		strcpy (pDevice->BusSpeedStr, "32-bit ");
-	} else {
-		strcpy (pDevice->BusSpeedStr, "64-bit ");
-	}
-	if (PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) {
-		strcat (pDevice->BusSpeedStr, "PCI ");
-		if (PciState & T3_PCI_STATE_HIGH_BUS_SPEED) {
-			SpeedStr = "66MHz";
-		} else {
-			SpeedStr = "33MHz";
-		}
-	} else {
-		strcat (pDevice->BusSpeedStr, "PCIX ");
-		if (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE) {
-			SpeedStr = "133MHz";
-		} else {
-			ClockCtrl = REG_RD (pDevice, PciCfg.ClockCtrl) & 0x1f;
-			switch (ClockCtrl) {
-			case 0:
-				SpeedStr = "33MHz";
-				break;
-
-			case 2:
-				SpeedStr = "50MHz";
-				break;
-
-			case 4:
-				SpeedStr = "66MHz";
-				break;
-
-			case 6:
-				SpeedStr = "100MHz";
-				break;
-
-			case 7:
-				SpeedStr = "133MHz";
-				break;
-			}
-		}
-	}
-	strcat (pDevice->BusSpeedStr, SpeedStr);
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    This routine initializes default parameters and reads the PCI           */
-/*    configurations.                                                         */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-LM_STATUS LM_GetAdapterInfo (PLM_DEVICE_BLOCK pDevice)
-{
-	PLM_ADAPTER_INFO pAdapterInfo;
-	LM_UINT32 Value32;
-	LM_STATUS Status;
-	LM_UINT32 j;
-	LM_UINT32 EeSigFound;
-	LM_UINT32 EePhyTypeSerdes = 0;
-	LM_UINT32 EePhyLedMode = 0;
-	LM_UINT32 EePhyId = 0;
-
-	/* Get Device Id and Vendor Id */
-	Status = MM_ReadConfig32 (pDevice, PCI_VENDOR_ID_REG, &Value32);
-	if (Status != LM_STATUS_SUCCESS) {
-		return Status;
-	}
-	pDevice->PciVendorId = (LM_UINT16) Value32;
-	pDevice->PciDeviceId = (LM_UINT16) (Value32 >> 16);
-
-	/* If we are not getting the write adapter, exit. */
-	if ((Value32 != T3_PCI_ID_BCM5700) &&
-	    (Value32 != T3_PCI_ID_BCM5701) &&
-	    (Value32 != T3_PCI_ID_BCM5702) &&
-	    (Value32 != T3_PCI_ID_BCM5702x) &&
-	    (Value32 != T3_PCI_ID_BCM5702FE) &&
-	    (Value32 != T3_PCI_ID_BCM5703) &&
-	    (Value32 != T3_PCI_ID_BCM5703x) && (Value32 != T3_PCI_ID_BCM5704)) {
-		return LM_STATUS_FAILURE;
-	}
-
-	Status = MM_ReadConfig32 (pDevice, PCI_REV_ID_REG, &Value32);
-	if (Status != LM_STATUS_SUCCESS) {
-		return Status;
-	}
-	pDevice->PciRevId = (LM_UINT8) Value32;
-
-	/* Get IRQ. */
-	Status = MM_ReadConfig32 (pDevice, PCI_INT_LINE_REG, &Value32);
-	if (Status != LM_STATUS_SUCCESS) {
-		return Status;
-	}
-	pDevice->Irq = (LM_UINT8) Value32;
-
-	/* Get interrupt pin. */
-	pDevice->IntPin = (LM_UINT8) (Value32 >> 8);
-
-	/* Get chip revision id. */
-	Status = MM_ReadConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG, &Value32);
-	pDevice->ChipRevId = Value32 >> 16;
-
-	/* Get subsystem vendor. */
-	Status =
-	    MM_ReadConfig32 (pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG, &Value32);
-	if (Status != LM_STATUS_SUCCESS) {
-		return Status;
-	}
-	pDevice->SubsystemVendorId = (LM_UINT16) Value32;
-
-	/* Get PCI subsystem id. */
-	pDevice->SubsystemId = (LM_UINT16) (Value32 >> 16);
-
-	/* Get the cache line size. */
-	MM_ReadConfig32 (pDevice, PCI_CACHE_LINE_SIZE_REG, &Value32);
-	pDevice->CacheLineSize = (LM_UINT8) Value32;
-	pDevice->SavedCacheLineReg = Value32;
-
-	if (pDevice->ChipRevId != T3_CHIP_ID_5703_A1 &&
-	    pDevice->ChipRevId != T3_CHIP_ID_5703_A2 &&
-	    pDevice->ChipRevId != T3_CHIP_ID_5704_A0) {
-		pDevice->UndiFix = FALSE;
-	}
-#if !PCIX_TARGET_WORKAROUND
-	pDevice->UndiFix = FALSE;
-#endif
-	/* Map the memory base to system address space. */
-	if (!pDevice->UndiFix) {
-		Status = MM_MapMemBase (pDevice);
-		if (Status != LM_STATUS_SUCCESS) {
-			return Status;
-		}
-		/* Initialize the memory view pointer. */
-		pDevice->pMemView = (PT3_STD_MEM_MAP) pDevice->pMappedMemBase;
-	}
-#if PCIX_TARGET_WORKAROUND
-	/* store whether we are in PCI are PCI-X mode */
-	pDevice->EnablePciXFix = FALSE;
-
-	MM_ReadConfig32 (pDevice, T3_PCI_STATE_REG, &Value32);
-	if ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0) {
-		/* Enable PCI-X workaround only if we are running on 5700 BX. */
-		if (T3_CHIP_REV (pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) {
-			pDevice->EnablePciXFix = TRUE;
-		}
-	}
-	if (pDevice->UndiFix) {
-		pDevice->EnablePciXFix = TRUE;
-	}
-#endif
-	/* Bx bug: due to the "byte_enable bug" in PCI-X mode, the power */
-	/* management register may be clobbered which may cause the */
-	/* BCM5700 to go into D3 state.  While in this state, we will */
-	/* not have memory mapped register access.  As a workaround, we */
-	/* need to restore the device to D0 state. */
-	MM_ReadConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, &Value32);
-	Value32 |= T3_PM_PME_ASSERTED;
-	Value32 &= ~T3_PM_POWER_STATE_MASK;
-	Value32 |= T3_PM_POWER_STATE_D0;
-	MM_WriteConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, Value32);
-
-	/* read the current PCI command word */
-	MM_ReadConfig32 (pDevice, PCI_COMMAND_REG, &Value32);
-
-	/* Make sure bus-mastering is enabled. */
-	Value32 |= PCI_BUSMASTER_ENABLE;
-
-#if PCIX_TARGET_WORKAROUND
-	/* if we are in PCI-X mode, also make sure mem-mapping and SERR#/PERR#
-	   are enabled */
-	if (pDevice->EnablePciXFix == TRUE) {
-		Value32 |= (PCI_MEM_SPACE_ENABLE | PCI_SYSTEM_ERROR_ENABLE |
-			    PCI_PARITY_ERROR_ENABLE);
-	}
-	if (pDevice->UndiFix) {
-		Value32 &= ~PCI_MEM_SPACE_ENABLE;
-	}
-#endif
-
-	if (pDevice->EnableMWI) {
-		Value32 |= PCI_MEMORY_WRITE_INVALIDATE;
-	} else {
-		Value32 &= (~PCI_MEMORY_WRITE_INVALIDATE);
-	}
-
-	/* Error out if mem-mapping is NOT enabled for PCI systems */
-	if (!(Value32 | PCI_MEM_SPACE_ENABLE)) {
-		return LM_STATUS_FAILURE;
-	}
-
-	/* save the value we are going to write into the PCI command word */
-	pDevice->PciCommandStatusWords = Value32;
-
-	Status = MM_WriteConfig32 (pDevice, PCI_COMMAND_REG, Value32);
-	if (Status != LM_STATUS_SUCCESS) {
-		return Status;
-	}
-
-	/* Set power state to D0. */
-	LM_SetPowerState (pDevice, LM_POWER_STATE_D0);
-
-#ifdef BIG_ENDIAN_PCI
-	pDevice->MiscHostCtrl =
-	    MISC_HOST_CTRL_MASK_PCI_INT |
-	    MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS |
-	    MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP |
-	    MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW;
-#else				/* No CPU Swap modes for PCI IO */
-
-	/* Setup the mode registers. */
-	pDevice->MiscHostCtrl =
-	    MISC_HOST_CTRL_MASK_PCI_INT |
-	    MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP |
-#ifdef BIG_ENDIAN_HOST
-	    MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP |
-#endif				/* BIG_ENDIAN_HOST */
-	    MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS |
-	    MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW;
-#endif				/* !BIG_ENDIAN_PCI */
-
-	/* write to PCI misc host ctr first in order to enable indirect accesses */
-	MM_WriteConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG,
-			  pDevice->MiscHostCtrl);
-
-	REG_WR (pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl);
-
-#ifdef BIG_ENDIAN_PCI
-	Value32 = GRC_MODE_WORD_SWAP_DATA | GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
-#else
-/* No CPU Swap modes for PCI IO */
-#ifdef BIG_ENDIAN_HOST
-	Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
-	    GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
-#else
-	Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA;
-#endif
-#endif				/* !BIG_ENDIAN_PCI */
-
-	REG_WR (pDevice, Grc.Mode, Value32);
-
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-		REG_WR (pDevice, Grc.LocalCtrl,
-			GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
-			GRC_MISC_LOCAL_CTRL_GPIO_OE1);
-	}
-	MM_Wait (40);
-
-	/* Enable indirect memory access */
-	REG_WR (pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE);
-
-	if (REG_RD (pDevice, PciCfg.ClockCtrl) & T3_PCI_44MHZ_CORE_CLOCK) {
-		REG_WR (pDevice, PciCfg.ClockCtrl, T3_PCI_44MHZ_CORE_CLOCK |
-			T3_PCI_SELECT_ALTERNATE_CLOCK);
-		REG_WR (pDevice, PciCfg.ClockCtrl,
-			T3_PCI_SELECT_ALTERNATE_CLOCK);
-		MM_Wait (40);	/* required delay is 27usec */
-	}
-	REG_WR (pDevice, PciCfg.ClockCtrl, 0);
-	REG_WR (pDevice, PciCfg.MemWindowBaseAddr, 0);
-
-#if PCIX_TARGET_WORKAROUND
-	MM_ReadConfig32 (pDevice, T3_PCI_STATE_REG, &Value32);
-	if ((pDevice->EnablePciXFix == FALSE) &&
-	    ((Value32 & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) == 0)) {
-		if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
-		    pDevice->ChipRevId == T3_CHIP_ID_5701_B0 ||
-		    pDevice->ChipRevId == T3_CHIP_ID_5701_B2 ||
-		    pDevice->ChipRevId == T3_CHIP_ID_5701_B5) {
-			__raw_writel (0,
-				      &(pDevice->pMemView->uIntMem.
-					MemBlock32K[0x300]));
-			__raw_writel (0,
-				      &(pDevice->pMemView->uIntMem.
-					MemBlock32K[0x301]));
-			__raw_writel (0xffffffff,
-				      &(pDevice->pMemView->uIntMem.
-					MemBlock32K[0x301]));
-			if (__raw_readl
-			    (&(pDevice->pMemView->uIntMem.MemBlock32K[0x300])))
-			{
-				pDevice->EnablePciXFix = TRUE;
-			}
-		}
-	}
-#endif
-#if 1
-	/*
-	 *  This code was at the beginning of else block below, but that's
-	 *  a bug if node address in shared memory.
-	 */
-	MM_Wait (50);
-	LM_NvramInit (pDevice);
-#endif
-	/* Get the node address.  First try to get in from the shared memory. */
-	/* If the signature is not present, then get it from the NVRAM. */
-	Value32 = MEM_RD_OFFSET (pDevice, T3_MAC_ADDR_HIGH_MAILBOX);
-	if ((Value32 >> 16) == 0x484b) {
-
-		pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 8);
-		pDevice->NodeAddress[1] = (LM_UINT8) Value32;
-
-		Value32 = MEM_RD_OFFSET (pDevice, T3_MAC_ADDR_LOW_MAILBOX);
-
-		pDevice->NodeAddress[2] = (LM_UINT8) (Value32 >> 24);
-		pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 16);
-		pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 8);
-		pDevice->NodeAddress[5] = (LM_UINT8) Value32;
-
-		Status = LM_STATUS_SUCCESS;
-	} else {
-		Status = LM_NvramRead (pDevice, 0x7c, &Value32);
-		if (Status == LM_STATUS_SUCCESS) {
-			pDevice->NodeAddress[0] = (LM_UINT8) (Value32 >> 16);
-			pDevice->NodeAddress[1] = (LM_UINT8) (Value32 >> 24);
-
-			Status = LM_NvramRead (pDevice, 0x80, &Value32);
-
-			pDevice->NodeAddress[2] = (LM_UINT8) Value32;
-			pDevice->NodeAddress[3] = (LM_UINT8) (Value32 >> 8);
-			pDevice->NodeAddress[4] = (LM_UINT8) (Value32 >> 16);
-			pDevice->NodeAddress[5] = (LM_UINT8) (Value32 >> 24);
-		}
-	}
-
-	/* Assign a default address. */
-	if (Status != LM_STATUS_SUCCESS) {
-#ifndef EMBEDDED
-		printk (KERN_ERR
-			"Cannot get MAC addr from NVRAM. Using default.\n");
-#endif
-		pDevice->NodeAddress[0] = 0x00;
-		pDevice->NodeAddress[1] = 0x10;
-		pDevice->NodeAddress[2] = 0x18;
-		pDevice->NodeAddress[3] = 0x68;
-		pDevice->NodeAddress[4] = 0x61;
-		pDevice->NodeAddress[5] = 0x76;
-	}
-
-	pDevice->PermanentNodeAddress[0] = pDevice->NodeAddress[0];
-	pDevice->PermanentNodeAddress[1] = pDevice->NodeAddress[1];
-	pDevice->PermanentNodeAddress[2] = pDevice->NodeAddress[2];
-	pDevice->PermanentNodeAddress[3] = pDevice->NodeAddress[3];
-	pDevice->PermanentNodeAddress[4] = pDevice->NodeAddress[4];
-	pDevice->PermanentNodeAddress[5] = pDevice->NodeAddress[5];
-
-	/* Initialize the default values. */
-	pDevice->NoTxPseudoHdrChksum = FALSE;
-	pDevice->NoRxPseudoHdrChksum = FALSE;
-	pDevice->NicSendBd = FALSE;
-	pDevice->TxPacketDescCnt = DEFAULT_TX_PACKET_DESC_COUNT;
-	pDevice->RxStdDescCnt = DEFAULT_STD_RCV_DESC_COUNT;
-	pDevice->RxCoalescingTicks = DEFAULT_RX_COALESCING_TICKS;
-	pDevice->TxCoalescingTicks = DEFAULT_TX_COALESCING_TICKS;
-	pDevice->RxMaxCoalescedFrames = DEFAULT_RX_MAX_COALESCED_FRAMES;
-	pDevice->TxMaxCoalescedFrames = DEFAULT_TX_MAX_COALESCED_FRAMES;
-	pDevice->RxCoalescingTicksDuringInt = BAD_DEFAULT_VALUE;
-	pDevice->TxCoalescingTicksDuringInt = BAD_DEFAULT_VALUE;
-	pDevice->RxMaxCoalescedFramesDuringInt = BAD_DEFAULT_VALUE;
-	pDevice->TxMaxCoalescedFramesDuringInt = BAD_DEFAULT_VALUE;
-	pDevice->StatsCoalescingTicks = DEFAULT_STATS_COALESCING_TICKS;
-	pDevice->EnableMWI = FALSE;
-	pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
-	pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
-	pDevice->DisableAutoNeg = FALSE;
-	pDevice->PhyIntMode = T3_PHY_INT_MODE_AUTO;
-	pDevice->LinkChngMode = T3_LINK_CHNG_MODE_AUTO;
-	pDevice->LedMode = LED_MODE_AUTO;
-	pDevice->ResetPhyOnInit = TRUE;
-	pDevice->DelayPciGrant = TRUE;
-	pDevice->UseTaggedStatus = FALSE;
-	pDevice->OneDmaAtOnce = BAD_DEFAULT_VALUE;
-
-	pDevice->DmaMbufLowMark = T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO;
-	pDevice->RxMacMbufLowMark = T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO;
-	pDevice->MbufHighMark = T3_DEF_MBUF_HIGH_WMARK_JUMBO;
-
-	pDevice->RequestedMediaType = LM_REQUESTED_MEDIA_TYPE_AUTO;
-	pDevice->TaskOffloadCap = LM_TASK_OFFLOAD_NONE;
-	pDevice->FlowControlCap = LM_FLOW_CONTROL_AUTO_PAUSE;
-	pDevice->EnableTbi = FALSE;
-#if INCLUDE_TBI_SUPPORT
-	pDevice->PollTbiLink = BAD_DEFAULT_VALUE;
-#endif
-
-	switch (T3_ASIC_REV (pDevice->ChipRevId)) {
-	case T3_ASIC_REV_5704:
-		pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR;
-		pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE64;
-		break;
-	default:
-		pDevice->MbufBase = T3_NIC_MBUF_POOL_ADDR;
-		pDevice->MbufSize = T3_NIC_MBUF_POOL_SIZE96;
-		break;
-	}
-
-	pDevice->LinkStatus = LM_STATUS_LINK_DOWN;
-	pDevice->QueueRxPackets = TRUE;
-
-	pDevice->EnableWireSpeed = TRUE;
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	pDevice->RxJumboDescCnt = DEFAULT_JUMBO_RCV_DESC_COUNT;
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-	/* Make this is a known adapter. */
-	pAdapterInfo = LM_GetAdapterInfoBySsid (pDevice->SubsystemVendorId,
-						pDevice->SubsystemId);
-
-	pDevice->BondId = REG_RD (pDevice, Grc.MiscCfg) & GRC_MISC_BD_ID_MASK;
-	if (pDevice->BondId != GRC_MISC_BD_ID_5700 &&
-	    pDevice->BondId != GRC_MISC_BD_ID_5701 &&
-	    pDevice->BondId != GRC_MISC_BD_ID_5702FE &&
-	    pDevice->BondId != GRC_MISC_BD_ID_5703 &&
-	    pDevice->BondId != GRC_MISC_BD_ID_5703S &&
-	    pDevice->BondId != GRC_MISC_BD_ID_5704 &&
-	    pDevice->BondId != GRC_MISC_BD_ID_5704CIOBE) {
-		return LM_STATUS_UNKNOWN_ADAPTER;
-	}
-
-	pDevice->SplitModeEnable = SPLIT_MODE_DISABLE;
-	if ((pDevice->ChipRevId == T3_CHIP_ID_5704_A0) &&
-	    (pDevice->BondId == GRC_MISC_BD_ID_5704CIOBE)) {
-		pDevice->SplitModeEnable = SPLIT_MODE_ENABLE;
-		pDevice->SplitModeMaxReq = SPLIT_MODE_5704_MAX_REQ;
-	}
-
-	/* Get Eeprom info. */
-	Value32 = MEM_RD_OFFSET (pDevice, T3_NIC_DATA_SIG_ADDR);
-	if (Value32 == T3_NIC_DATA_SIG) {
-		EeSigFound = TRUE;
-		Value32 = MEM_RD_OFFSET (pDevice, T3_NIC_DATA_NIC_CFG_ADDR);
-
-		/* Determine PHY type. */
-		switch (Value32 & T3_NIC_CFG_PHY_TYPE_MASK) {
-		case T3_NIC_CFG_PHY_TYPE_COPPER:
-			EePhyTypeSerdes = FALSE;
-			break;
-
-		case T3_NIC_CFG_PHY_TYPE_FIBER:
-			EePhyTypeSerdes = TRUE;
-			break;
-
-		default:
-			EePhyTypeSerdes = FALSE;
-			break;
-		}
-
-		/* Determine PHY led mode. */
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-		    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-			switch (Value32 & T3_NIC_CFG_LED_MODE_MASK) {
-			case T3_NIC_CFG_LED_MODE_TRIPLE_SPEED:
-				EePhyLedMode = LED_MODE_THREE_LINK;
-				break;
-
-			case T3_NIC_CFG_LED_MODE_LINK_SPEED:
-				EePhyLedMode = LED_MODE_LINK10;
-				break;
-
-			default:
-				EePhyLedMode = LED_MODE_AUTO;
-				break;
-			}
-		} else {
-			switch (Value32 & T3_NIC_CFG_LED_MODE_MASK) {
-			case T3_NIC_CFG_LED_MODE_OPEN_DRAIN:
-				EePhyLedMode = LED_MODE_OPEN_DRAIN;
-				break;
-
-			case T3_NIC_CFG_LED_MODE_OUTPUT:
-				EePhyLedMode = LED_MODE_OUTPUT;
-				break;
-
-			default:
-				EePhyLedMode = LED_MODE_AUTO;
-				break;
-			}
-		}
-		if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1 ||
-		    pDevice->ChipRevId == T3_CHIP_ID_5703_A2) {
-			/* Enable EEPROM write protection. */
-			if (Value32 & T3_NIC_EEPROM_WP) {
-				pDevice->EepromWp = TRUE;
-			}
-		}
-
-		/* Get the PHY Id. */
-		Value32 = MEM_RD_OFFSET (pDevice, T3_NIC_DATA_PHY_ID_ADDR);
-		if (Value32) {
-			EePhyId = (((Value32 & T3_NIC_PHY_ID1_MASK) >> 16) &
-				   PHY_ID1_OUI_MASK) << 10;
-
-			Value32 = Value32 & T3_NIC_PHY_ID2_MASK;
-
-			EePhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) |
-			    (Value32 & PHY_ID2_MODEL_MASK) | (Value32 &
-							      PHY_ID2_REV_MASK);
-		} else {
-			EePhyId = 0;
-		}
-	} else {
-		EeSigFound = FALSE;
-	}
-
-	/* Set the PHY address. */
-	pDevice->PhyAddr = PHY_DEVICE_ID;
-
-	/* Disable auto polling. */
-	pDevice->MiMode = 0xc0000;
-	REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
-	MM_Wait (40);
-
-	/* Get the PHY id. */
-	LM_ReadPhy (pDevice, PHY_ID1_REG, &Value32);
-	pDevice->PhyId = (Value32 & PHY_ID1_OUI_MASK) << 10;
-
-	LM_ReadPhy (pDevice, PHY_ID2_REG, &Value32);
-	pDevice->PhyId |= ((Value32 & PHY_ID2_OUI_MASK) << 16) |
-	    (Value32 & PHY_ID2_MODEL_MASK) | (Value32 & PHY_ID2_REV_MASK);
-
-	/* Set the EnableTbi flag to false if we have a copper PHY. */
-	switch (pDevice->PhyId & PHY_ID_MASK) {
-	case PHY_BCM5400_PHY_ID:
-		pDevice->EnableTbi = FALSE;
-		break;
-
-	case PHY_BCM5401_PHY_ID:
-		pDevice->EnableTbi = FALSE;
-		break;
-
-	case PHY_BCM5411_PHY_ID:
-		pDevice->EnableTbi = FALSE;
-		break;
-
-	case PHY_BCM5701_PHY_ID:
-		pDevice->EnableTbi = FALSE;
-		break;
-
-	case PHY_BCM5703_PHY_ID:
-		pDevice->EnableTbi = FALSE;
-		break;
-
-	case PHY_BCM5704_PHY_ID:
-		pDevice->EnableTbi = FALSE;
-		break;
-
-	case PHY_BCM8002_PHY_ID:
-		pDevice->EnableTbi = TRUE;
-		break;
-
-	default:
-
-		if (pAdapterInfo) {
-			pDevice->PhyId = pAdapterInfo->PhyId;
-			pDevice->EnableTbi = pAdapterInfo->Serdes;
-		} else if (EeSigFound) {
-			pDevice->PhyId = EePhyId;
-			pDevice->EnableTbi = EePhyTypeSerdes;
-		}
-		break;
-	}
-
-	/* Bail out if we don't know the copper PHY id. */
-	if (UNKNOWN_PHY_ID (pDevice->PhyId) && !pDevice->EnableTbi) {
-		return LM_STATUS_FAILURE;
-	}
-
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5703) {
-		if ((pDevice->SavedCacheLineReg & 0xff00) < 0x4000) {
-			pDevice->SavedCacheLineReg &= 0xffff00ff;
-			pDevice->SavedCacheLineReg |= 0x4000;
-		}
-	}
-	/* Change driver parameters. */
-	Status = MM_GetConfig (pDevice);
-	if (Status != LM_STATUS_SUCCESS) {
-		return Status;
-	}
-#if INCLUDE_5701_AX_FIX
-	if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
-	    pDevice->ChipRevId == T3_CHIP_ID_5701_B0) {
-		pDevice->ResetPhyOnInit = TRUE;
-	}
-#endif
-
-	/* Save the current phy link status. */
-	if (!pDevice->EnableTbi) {
-		LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-		LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-
-		/* If we don't have link reset the PHY. */
-		if (!(Value32 & PHY_STATUS_LINK_PASS)
-		    || pDevice->ResetPhyOnInit) {
-
-			LM_WritePhy (pDevice, PHY_CTRL_REG, PHY_CTRL_PHY_RESET);
-
-			for (j = 0; j < 100; j++) {
-				MM_Wait (10);
-
-				LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32);
-				if (Value32 && !(Value32 & PHY_CTRL_PHY_RESET)) {
-					MM_Wait (40);
-					break;
-				}
-			}
-
-#if INCLUDE_5701_AX_FIX
-			/* 5701_AX_BX bug:  only advertises 10mb speed. */
-			if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
-			    pDevice->ChipRevId == T3_CHIP_ID_5701_B0) {
-
-				Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD |
-				    PHY_AN_AD_10BASET_HALF |
-				    PHY_AN_AD_10BASET_FULL |
-				    PHY_AN_AD_100BASETX_FULL |
-				    PHY_AN_AD_100BASETX_HALF;
-				Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
-				LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
-				pDevice->advertising = Value32;
-
-				Value32 = BCM540X_AN_AD_1000BASET_HALF |
-				    BCM540X_AN_AD_1000BASET_FULL |
-				    BCM540X_CONFIG_AS_MASTER |
-				    BCM540X_ENABLE_CONFIG_AS_MASTER;
-				LM_WritePhy (pDevice,
-					     BCM540X_1000BASET_CTRL_REG,
-					     Value32);
-				pDevice->advertising1000 = Value32;
-
-				LM_WritePhy (pDevice, PHY_CTRL_REG,
-					     PHY_CTRL_AUTO_NEG_ENABLE |
-					     PHY_CTRL_RESTART_AUTO_NEG);
-			}
-#endif
-			if (T3_ASIC_REV (pDevice->ChipRevId) ==
-			    T3_ASIC_REV_5703) {
-				LM_WritePhy (pDevice, 0x18, 0x0c00);
-				LM_WritePhy (pDevice, 0x17, 0x201f);
-				LM_WritePhy (pDevice, 0x15, 0x2aaa);
-			}
-			if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) {
-				LM_WritePhy (pDevice, 0x1c, 0x8d68);
-				LM_WritePhy (pDevice, 0x1c, 0x8d68);
-			}
-			/* Enable Ethernet@WireSpeed. */
-			if (pDevice->EnableWireSpeed) {
-				LM_WritePhy (pDevice, 0x18, 0x7007);
-				LM_ReadPhy (pDevice, 0x18, &Value32);
-				LM_WritePhy (pDevice, 0x18,
-					     Value32 | BIT_15 | BIT_4);
-			}
-		}
-	}
-
-	/* Turn off tap power management. */
-	if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) {
-		LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x0c20);
-		LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
-		LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1804);
-		LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
-		LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1204);
-		LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
-		LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0132);
-		LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
-		LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0232);
-		LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
-		LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
-
-		MM_Wait (40);
-	}
-#if INCLUDE_TBI_SUPPORT
-	pDevice->IgnoreTbiLinkChange = FALSE;
-
-	if (pDevice->EnableTbi) {
-		pDevice->WakeUpModeCap = LM_WAKE_UP_MODE_NONE;
-		pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY;
-		if ((pDevice->PollTbiLink == BAD_DEFAULT_VALUE) ||
-		    pDevice->DisableAutoNeg) {
-			pDevice->PollTbiLink = FALSE;
-		}
-	} else {
-		pDevice->PollTbiLink = FALSE;
-	}
-#endif				/* INCLUDE_TBI_SUPPORT */
-
-	/* UseTaggedStatus is only valid for 5701 and later. */
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-		pDevice->UseTaggedStatus = FALSE;
-
-		pDevice->CoalesceMode = 0;
-	} else {
-		pDevice->CoalesceMode =
-		    HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT |
-		    HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT;
-	}
-
-	/* Set the status block size. */
-	if (T3_CHIP_REV (pDevice->ChipRevId) != T3_CHIP_REV_5700_AX &&
-	    T3_CHIP_REV (pDevice->ChipRevId) != T3_CHIP_REV_5700_BX) {
-		pDevice->CoalesceMode |= HOST_COALESCE_32_BYTE_STATUS_MODE;
-	}
-
-	/* Check the DURING_INT coalescing ticks parameters. */
-	if (pDevice->UseTaggedStatus) {
-		if (pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) {
-			pDevice->RxCoalescingTicksDuringInt =
-			    DEFAULT_RX_COALESCING_TICKS_DURING_INT;
-		}
-
-		if (pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) {
-			pDevice->TxCoalescingTicksDuringInt =
-			    DEFAULT_TX_COALESCING_TICKS_DURING_INT;
-		}
-
-		if (pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) {
-			pDevice->RxMaxCoalescedFramesDuringInt =
-			    DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT;
-		}
-
-		if (pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) {
-			pDevice->TxMaxCoalescedFramesDuringInt =
-			    DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT;
-		}
-	} else {
-		if (pDevice->RxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) {
-			pDevice->RxCoalescingTicksDuringInt = 0;
-		}
-
-		if (pDevice->TxCoalescingTicksDuringInt == BAD_DEFAULT_VALUE) {
-			pDevice->TxCoalescingTicksDuringInt = 0;
-		}
-
-		if (pDevice->RxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) {
-			pDevice->RxMaxCoalescedFramesDuringInt = 0;
-		}
-
-		if (pDevice->TxMaxCoalescedFramesDuringInt == BAD_DEFAULT_VALUE) {
-			pDevice->TxMaxCoalescedFramesDuringInt = 0;
-		}
-	}
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	if (pDevice->RxMtu <= (MAX_STD_RCV_BUFFER_SIZE - 8 /* CRC */ )) {
-		pDevice->RxJumboDescCnt = 0;
-		if (pDevice->RxMtu <= MAX_ETHERNET_PACKET_SIZE_NO_CRC) {
-			pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
-		}
-	} else {
-		pDevice->RxJumboBufferSize =
-		    (pDevice->RxMtu + 8 /* CRC + VLAN */  +
-		     COMMON_CACHE_LINE_SIZE - 1) & ~COMMON_CACHE_LINE_MASK;
-
-		if (pDevice->RxJumboBufferSize > MAX_JUMBO_RCV_BUFFER_SIZE) {
-			pDevice->RxJumboBufferSize =
-			    DEFAULT_JUMBO_RCV_BUFFER_SIZE;
-			pDevice->RxMtu =
-			    pDevice->RxJumboBufferSize - 8 /* CRC + VLAN */ ;
-		}
-		pDevice->TxMtu = pDevice->RxMtu;
-
-	}
-#else
-	pDevice->RxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-	pDevice->RxPacketDescCnt =
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	    pDevice->RxJumboDescCnt +
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-	    pDevice->RxStdDescCnt;
-
-	if (pDevice->TxMtu < MAX_ETHERNET_PACKET_SIZE_NO_CRC) {
-		pDevice->TxMtu = MAX_ETHERNET_PACKET_SIZE_NO_CRC;
-	}
-
-	if (pDevice->TxMtu > MAX_JUMBO_TX_BUFFER_SIZE) {
-		pDevice->TxMtu = MAX_JUMBO_TX_BUFFER_SIZE;
-	}
-
-	/* Configure the proper ways to get link change interrupt. */
-	if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO) {
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-			pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
-		} else {
-			pDevice->PhyIntMode = T3_PHY_INT_MODE_LINK_READY;
-		}
-	} else if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
-		/* Auto-polling does not work on 5700_AX and 5700_BX. */
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-			pDevice->PhyIntMode = T3_PHY_INT_MODE_MI_INTERRUPT;
-		}
-	}
-
-	/* Determine the method to get link change status. */
-	if (pDevice->LinkChngMode == T3_LINK_CHNG_MODE_AUTO) {
-		/* The link status bit in the status block does not work on 5700_AX */
-		/* and 5700_BX chips. */
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-			pDevice->LinkChngMode =
-			    T3_LINK_CHNG_MODE_USE_STATUS_REG;
-		} else {
-			pDevice->LinkChngMode =
-			    T3_LINK_CHNG_MODE_USE_STATUS_BLOCK;
-		}
-	}
-
-	if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT ||
-	    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-		pDevice->LinkChngMode = T3_LINK_CHNG_MODE_USE_STATUS_REG;
-	}
-
-	/* Configure PHY led mode. */
-	if (pDevice->LedMode == LED_MODE_AUTO) {
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-		    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-			if (pDevice->SubsystemVendorId == T3_SVID_DELL) {
-				pDevice->LedMode = LED_MODE_LINK10;
-			} else {
-				pDevice->LedMode = LED_MODE_THREE_LINK;
-
-				if (EeSigFound && EePhyLedMode != LED_MODE_AUTO) {
-					pDevice->LedMode = EePhyLedMode;
-				}
-			}
-
-			/* bug? 5701 in LINK10 mode does not seem to work when */
-			/* PhyIntMode is LINK_READY. */
-			if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700
-			    &&
-#if INCLUDE_TBI_SUPPORT
-			    pDevice->EnableTbi == FALSE &&
-#endif
-			    pDevice->LedMode == LED_MODE_LINK10) {
-				pDevice->PhyIntMode =
-				    T3_PHY_INT_MODE_MI_INTERRUPT;
-				pDevice->LinkChngMode =
-				    T3_LINK_CHNG_MODE_USE_STATUS_REG;
-			}
-
-			if (pDevice->EnableTbi) {
-				pDevice->LedMode = LED_MODE_THREE_LINK;
-			}
-		} else {
-			if (EeSigFound && EePhyLedMode != LED_MODE_AUTO) {
-				pDevice->LedMode = EePhyLedMode;
-			} else {
-				pDevice->LedMode = LED_MODE_OPEN_DRAIN;
-			}
-		}
-	}
-
-	/* Enable OneDmaAtOnce. */
-	if (pDevice->OneDmaAtOnce == BAD_DEFAULT_VALUE) {
-		pDevice->OneDmaAtOnce = FALSE;
-	}
-
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-	    pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
-	    pDevice->ChipRevId == T3_CHIP_ID_5701_B0 ||
-	    pDevice->ChipRevId == T3_CHIP_ID_5701_B2) {
-		pDevice->WolSpeed = WOL_SPEED_10MB;
-	} else {
-		pDevice->WolSpeed = WOL_SPEED_100MB;
-	}
-
-	/* Offloadings. */
-	pDevice->TaskToOffload = LM_TASK_OFFLOAD_NONE;
-
-	/* Turn off task offloading on Ax. */
-	if (pDevice->ChipRevId == T3_CHIP_ID_5700_B0) {
-		pDevice->TaskOffloadCap &= ~(LM_TASK_OFFLOAD_TX_TCP_CHECKSUM |
-					     LM_TASK_OFFLOAD_TX_UDP_CHECKSUM);
-	}
-	pDevice->PciState = REG_RD (pDevice, PciCfg.PciState);
-	LM_ReadVPD (pDevice);
-	LM_ReadBootCodeVersion (pDevice);
-	LM_GetBusSpeed (pDevice);
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_GetAdapterInfo */
-
-STATIC PLM_ADAPTER_INFO LM_GetAdapterInfoBySsid (LM_UINT16 Svid, LM_UINT16 Ssid)
-{
-	static LM_ADAPTER_INFO AdapterArr[] = {
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A6,
-		 PHY_BCM5401_PHY_ID, 0},
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A5,
-		 PHY_BCM5701_PHY_ID, 0},
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700T6,
-		 PHY_BCM8002_PHY_ID, 1},
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95700A9, 0, 1},
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T1,
-		 PHY_BCM5701_PHY_ID, 0},
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701T8,
-		 PHY_BCM5701_PHY_ID, 0},
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A7, 0, 1},
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A10,
-		 PHY_BCM5701_PHY_ID, 0},
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95701A12,
-		 PHY_BCM5701_PHY_ID, 0},
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax1,
-		 PHY_BCM5701_PHY_ID, 0},
-		{T3_SVID_BROADCOM, T3_SSID_BROADCOM_BCM95703Ax2,
-		 PHY_BCM5701_PHY_ID, 0},
-
-		{T3_SVID_3COM, T3_SSID_3COM_3C996T, PHY_BCM5401_PHY_ID, 0},
-		{T3_SVID_3COM, T3_SSID_3COM_3C996BT, PHY_BCM5701_PHY_ID, 0},
-		{T3_SVID_3COM, T3_SSID_3COM_3C996SX, 0, 1},
-		{T3_SVID_3COM, T3_SSID_3COM_3C1000T, PHY_BCM5701_PHY_ID, 0},
-		{T3_SVID_3COM, T3_SSID_3COM_3C940BR01, PHY_BCM5701_PHY_ID, 0},
-
-		{T3_SVID_DELL, T3_SSID_DELL_VIPER, PHY_BCM5401_PHY_ID, 0},
-		{T3_SVID_DELL, T3_SSID_DELL_JAGUAR, PHY_BCM5401_PHY_ID, 0},
-		{T3_SVID_DELL, T3_SSID_DELL_MERLOT, PHY_BCM5411_PHY_ID, 0},
-		{T3_SVID_DELL, T3_SSID_DELL_SLIM_MERLOT, PHY_BCM5411_PHY_ID, 0},
-
-		{T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE, PHY_BCM5701_PHY_ID, 0},
-		{T3_SVID_COMPAQ, T3_SSID_COMPAQ_BANSHEE_2, PHY_BCM5701_PHY_ID,
-		 0},
-		{T3_SVID_COMPAQ, T3_SSID_COMPAQ_CHANGELING, 0, 1},
-		{T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780, PHY_BCM5701_PHY_ID, 0},
-		{T3_SVID_COMPAQ, T3_SSID_COMPAQ_NC7780_2, PHY_BCM5701_PHY_ID,
-		 0},
-
-	};
-	LM_UINT32 j;
-
-	for (j = 0; j < sizeof (AdapterArr) / sizeof (LM_ADAPTER_INFO); j++) {
-		if (AdapterArr[j].Svid == Svid && AdapterArr[j].Ssid == Ssid) {
-			return &AdapterArr[j];
-		}
-	}
-
-	return NULL;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    This routine sets up receive/transmit buffer descriptions queues.       */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-LM_STATUS LM_InitializeAdapter (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_PHYSICAL_ADDRESS MemPhy;
-	PLM_UINT8 pMemVirt;
-	PLM_PACKET pPacket;
-	LM_STATUS Status;
-	LM_UINT32 Size;
-	LM_UINT32 j;
-
-	/* Set power state to D0. */
-	LM_SetPowerState (pDevice, LM_POWER_STATE_D0);
-
-	/* Intialize the queues. */
-	QQ_InitQueue (&pDevice->RxPacketReceivedQ.Container,
-		      MAX_RX_PACKET_DESC_COUNT);
-	QQ_InitQueue (&pDevice->RxPacketFreeQ.Container,
-		      MAX_RX_PACKET_DESC_COUNT);
-
-	QQ_InitQueue (&pDevice->TxPacketFreeQ.Container,
-		      MAX_TX_PACKET_DESC_COUNT);
-	QQ_InitQueue (&pDevice->TxPacketActiveQ.Container,
-		      MAX_TX_PACKET_DESC_COUNT);
-	QQ_InitQueue (&pDevice->TxPacketXmittedQ.Container,
-		      MAX_TX_PACKET_DESC_COUNT);
-
-	/* Allocate shared memory for: status block, the buffers for receive */
-	/* rings -- standard, mini, jumbo, and return rings. */
-	Size = T3_STATUS_BLOCK_SIZE + sizeof (T3_STATS_BLOCK) +
-	    T3_STD_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD) +
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	    T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD) +
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-	    T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD);
-
-	/* Memory for host based Send BD. */
-	if (pDevice->NicSendBd == FALSE) {
-		Size += sizeof (T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT;
-	}
-
-	/* Allocate the memory block. */
-	Status =
-	    MM_AllocateSharedMemory (pDevice, Size, (PLM_VOID) & pMemVirt,
-				     &MemPhy, FALSE);
-	if (Status != LM_STATUS_SUCCESS) {
-		return Status;
-	}
-
-	/* Program DMA Read/Write */
-	if (pDevice->PciState & T3_PCI_STATE_NOT_PCI_X_BUS) {
-		pDevice->DmaReadWriteCtrl = 0x763f000f;
-	} else {
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5704) {
-			pDevice->DmaReadWriteCtrl = 0x761f0000;
-		} else {
-			pDevice->DmaReadWriteCtrl = 0x761b000f;
-		}
-		if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1 ||
-		    pDevice->ChipRevId == T3_CHIP_ID_5703_A2) {
-			pDevice->OneDmaAtOnce = TRUE;
-		}
-	}
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5703) {
-		pDevice->DmaReadWriteCtrl &= 0xfffffff0;
-	}
-
-	if (pDevice->OneDmaAtOnce) {
-		pDevice->DmaReadWriteCtrl |= DMA_CTRL_WRITE_ONE_DMA_AT_ONCE;
-	}
-	REG_WR (pDevice, PciCfg.DmaReadWriteCtrl, pDevice->DmaReadWriteCtrl);
-
-	if (LM_DmaTest (pDevice, pMemVirt, MemPhy, 0x400) != LM_STATUS_SUCCESS) {
-		return LM_STATUS_FAILURE;
-	}
-
-	/* Status block. */
-	pDevice->pStatusBlkVirt = (PT3_STATUS_BLOCK) pMemVirt;
-	pDevice->StatusBlkPhy = MemPhy;
-	pMemVirt += T3_STATUS_BLOCK_SIZE;
-	LM_INC_PHYSICAL_ADDRESS (&MemPhy, T3_STATUS_BLOCK_SIZE);
-
-	/* Statistics block. */
-	pDevice->pStatsBlkVirt = (PT3_STATS_BLOCK) pMemVirt;
-	pDevice->StatsBlkPhy = MemPhy;
-	pMemVirt += sizeof (T3_STATS_BLOCK);
-	LM_INC_PHYSICAL_ADDRESS (&MemPhy, sizeof (T3_STATS_BLOCK));
-
-	/* Receive standard BD buffer. */
-	pDevice->pRxStdBdVirt = (PT3_RCV_BD) pMemVirt;
-	pDevice->RxStdBdPhy = MemPhy;
-
-	pMemVirt += T3_STD_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD);
-	LM_INC_PHYSICAL_ADDRESS (&MemPhy,
-				 T3_STD_RCV_RCB_ENTRY_COUNT *
-				 sizeof (T3_RCV_BD));
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	/* Receive jumbo BD buffer. */
-	pDevice->pRxJumboBdVirt = (PT3_RCV_BD) pMemVirt;
-	pDevice->RxJumboBdPhy = MemPhy;
-
-	pMemVirt += T3_JUMBO_RCV_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD);
-	LM_INC_PHYSICAL_ADDRESS (&MemPhy,
-				 T3_JUMBO_RCV_RCB_ENTRY_COUNT *
-				 sizeof (T3_RCV_BD));
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-	/* Receive return BD buffer. */
-	pDevice->pRcvRetBdVirt = (PT3_RCV_BD) pMemVirt;
-	pDevice->RcvRetBdPhy = MemPhy;
-
-	pMemVirt += T3_RCV_RETURN_RCB_ENTRY_COUNT * sizeof (T3_RCV_BD);
-	LM_INC_PHYSICAL_ADDRESS (&MemPhy,
-				 T3_RCV_RETURN_RCB_ENTRY_COUNT *
-				 sizeof (T3_RCV_BD));
-
-	/* Set up Send BD. */
-	if (pDevice->NicSendBd == FALSE) {
-		pDevice->pSendBdVirt = (PT3_SND_BD) pMemVirt;
-		pDevice->SendBdPhy = MemPhy;
-
-		pMemVirt += sizeof (T3_SND_BD) * T3_SEND_RCB_ENTRY_COUNT;
-		LM_INC_PHYSICAL_ADDRESS (&MemPhy,
-					 sizeof (T3_SND_BD) *
-					 T3_SEND_RCB_ENTRY_COUNT);
-	} else {
-		pDevice->pSendBdVirt = (PT3_SND_BD)
-		    pDevice->pMemView->uIntMem.First32k.BufferDesc;
-		pDevice->SendBdPhy.High = 0;
-		pDevice->SendBdPhy.Low = T3_NIC_SND_BUFFER_DESC_ADDR;
-	}
-
-	/* Allocate memory for packet descriptors. */
-	Size = (pDevice->RxPacketDescCnt +
-		pDevice->TxPacketDescCnt) * MM_PACKET_DESC_SIZE;
-	Status = MM_AllocateMemory (pDevice, Size, (PLM_VOID *) & pPacket);
-	if (Status != LM_STATUS_SUCCESS) {
-		return Status;
-	}
-	pDevice->pPacketDescBase = (PLM_VOID) pPacket;
-
-	/* Create transmit packet descriptors from the memory block and add them */
-	/* to the TxPacketFreeQ for each send ring. */
-	for (j = 0; j < pDevice->TxPacketDescCnt; j++) {
-		/* Ring index. */
-		pPacket->Flags = 0;
-
-		/* Queue the descriptor in the TxPacketFreeQ of the 'k' ring. */
-		QQ_PushTail (&pDevice->TxPacketFreeQ.Container, pPacket);
-
-		/* Get the pointer to the next descriptor.  MM_PACKET_DESC_SIZE */
-		/* is the total size of the packet descriptor including the */
-		/* os-specific extensions in the UM_PACKET structure. */
-		pPacket =
-		    (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
-	}			/* for(j.. */
-
-	/* Create receive packet descriptors from the memory block and add them */
-	/* to the RxPacketFreeQ.  Create the Standard packet descriptors. */
-	for (j = 0; j < pDevice->RxStdDescCnt; j++) {
-		/* Receive producer ring. */
-		pPacket->u.Rx.RcvProdRing = T3_STD_RCV_PROD_RING;
-
-		/* Receive buffer size. */
-		pPacket->u.Rx.RxBufferSize = MAX_STD_RCV_BUFFER_SIZE;
-
-		/* Add the descriptor to RxPacketFreeQ. */
-		QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
-
-		/* Get the pointer to the next descriptor.  MM_PACKET_DESC_SIZE */
-		/* is the total size of the packet descriptor including the */
-		/* os-specific extensions in the UM_PACKET structure. */
-		pPacket =
-		    (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
-	}			/* for */
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	/* Create the Jumbo packet descriptors. */
-	for (j = 0; j < pDevice->RxJumboDescCnt; j++) {
-		/* Receive producer ring. */
-		pPacket->u.Rx.RcvProdRing = T3_JUMBO_RCV_PROD_RING;
-
-		/* Receive buffer size. */
-		pPacket->u.Rx.RxBufferSize = pDevice->RxJumboBufferSize;
-
-		/* Add the descriptor to RxPacketFreeQ. */
-		QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
-
-		/* Get the pointer to the next descriptor.  MM_PACKET_DESC_SIZE */
-		/* is the total size of the packet descriptor including the */
-		/* os-specific extensions in the UM_PACKET structure. */
-		pPacket =
-		    (PLM_PACKET) ((PLM_UINT8) pPacket + MM_PACKET_DESC_SIZE);
-	}			/* for */
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-	/* Initialize the rest of the packet descriptors. */
-	Status = MM_InitializeUmPackets (pDevice);
-	if (Status != LM_STATUS_SUCCESS) {
-		return Status;
-	}
-
-	/* if */
-	/* Default receive mask. */
-	pDevice->ReceiveMask = LM_ACCEPT_MULTICAST | LM_ACCEPT_BROADCAST |
-	    LM_ACCEPT_UNICAST;
-
-	/* Make sure we are in the first 32k memory window or NicSendBd. */
-	REG_WR (pDevice, PciCfg.MemWindowBaseAddr, 0);
-
-	/* Initialize the hardware. */
-	Status = LM_ResetAdapter (pDevice);
-	if (Status != LM_STATUS_SUCCESS) {
-		return Status;
-	}
-
-	/* We are done with initialization. */
-	pDevice->InitDone = TRUE;
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_InitializeAdapter */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    This function Enables/Disables a given block.                          */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-LM_STATUS
-LM_CntrlBlock (PLM_DEVICE_BLOCK pDevice, LM_UINT32 mask, LM_UINT32 cntrl)
-{
-	LM_UINT32 j, i, data;
-	LM_UINT32 MaxWaitCnt;
-
-	MaxWaitCnt = 2;
-	j = 0;
-
-	for (i = 0; i < 32; i++) {
-		if (!(mask & (1 << i)))
-			continue;
-
-		switch (1 << i) {
-		case T3_BLOCK_DMA_RD:
-			data = REG_RD (pDevice, DmaRead.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~DMA_READ_MODE_ENABLE;
-				REG_WR (pDevice, DmaRead.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, DmaRead.Mode) &
-					     DMA_READ_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, DmaRead.Mode,
-					data | DMA_READ_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_DMA_COMP:
-			data = REG_RD (pDevice, DmaComp.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~DMA_COMP_MODE_ENABLE;
-				REG_WR (pDevice, DmaComp.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, DmaComp.Mode) &
-					     DMA_COMP_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, DmaComp.Mode,
-					data | DMA_COMP_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_RX_BD_INITIATOR:
-			data = REG_RD (pDevice, RcvBdIn.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~RCV_BD_IN_MODE_ENABLE;
-				REG_WR (pDevice, RcvBdIn.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, RcvBdIn.Mode) &
-					     RCV_BD_IN_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, RcvBdIn.Mode,
-					data | RCV_BD_IN_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_RX_BD_COMP:
-			data = REG_RD (pDevice, RcvBdComp.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~RCV_BD_COMP_MODE_ENABLE;
-				REG_WR (pDevice, RcvBdComp.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, RcvBdComp.Mode) &
-					     RCV_BD_COMP_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, RcvBdComp.Mode,
-					data | RCV_BD_COMP_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_DMA_WR:
-			data = REG_RD (pDevice, DmaWrite.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~DMA_WRITE_MODE_ENABLE;
-				REG_WR (pDevice, DmaWrite.Mode, data);
-
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, DmaWrite.Mode) &
-					     DMA_WRITE_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, DmaWrite.Mode,
-					data | DMA_WRITE_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_MSI_HANDLER:
-			data = REG_RD (pDevice, Msi.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~MSI_MODE_ENABLE;
-				REG_WR (pDevice, Msi.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, Msi.Mode) &
-					     MSI_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, Msi.Mode,
-					data | MSI_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_RX_LIST_PLMT:
-			data = REG_RD (pDevice, RcvListPlmt.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~RCV_LIST_PLMT_MODE_ENABLE;
-				REG_WR (pDevice, RcvListPlmt.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, RcvListPlmt.Mode)
-					     & RCV_LIST_PLMT_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, RcvListPlmt.Mode,
-					data | RCV_LIST_PLMT_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_RX_LIST_SELECTOR:
-			data = REG_RD (pDevice, RcvListSel.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~RCV_LIST_SEL_MODE_ENABLE;
-				REG_WR (pDevice, RcvListSel.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, RcvListSel.Mode) &
-					     RCV_LIST_SEL_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, RcvListSel.Mode,
-					data | RCV_LIST_SEL_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_RX_DATA_INITIATOR:
-			data = REG_RD (pDevice, RcvDataBdIn.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~RCV_DATA_BD_IN_MODE_ENABLE;
-				REG_WR (pDevice, RcvDataBdIn.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, RcvDataBdIn.Mode)
-					     & RCV_DATA_BD_IN_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, RcvDataBdIn.Mode,
-					data | RCV_DATA_BD_IN_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_RX_DATA_COMP:
-			data = REG_RD (pDevice, RcvDataComp.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~RCV_DATA_COMP_MODE_ENABLE;
-				REG_WR (pDevice, RcvDataComp.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, RcvDataBdIn.Mode)
-					     & RCV_DATA_COMP_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, RcvDataComp.Mode,
-					data | RCV_DATA_COMP_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_HOST_COALESING:
-			data = REG_RD (pDevice, HostCoalesce.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~HOST_COALESCE_ENABLE;
-				REG_WR (pDevice, HostCoalesce.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, SndBdIn.Mode) &
-					     HOST_COALESCE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, HostCoalesce.Mode,
-					data | HOST_COALESCE_ENABLE);
-			break;
-
-		case T3_BLOCK_MAC_RX_ENGINE:
-			if (cntrl == LM_DISABLE) {
-				pDevice->RxMode &= ~RX_MODE_ENABLE;
-				REG_WR (pDevice, MacCtrl.RxMode,
-					pDevice->RxMode);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, MacCtrl.RxMode) &
-					     RX_MODE_ENABLE)) {
-						break;
-					}
-					MM_Wait (10);
-				}
-			} else {
-				pDevice->RxMode |= RX_MODE_ENABLE;
-				REG_WR (pDevice, MacCtrl.RxMode,
-					pDevice->RxMode);
-			}
-			break;
-
-		case T3_BLOCK_MBUF_CLUSTER_FREE:
-			data = REG_RD (pDevice, MbufClusterFree.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~MBUF_CLUSTER_FREE_MODE_ENABLE;
-				REG_WR (pDevice, MbufClusterFree.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD
-					     (pDevice,
-					      MbufClusterFree.
-					      Mode) &
-					     MBUF_CLUSTER_FREE_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, MbufClusterFree.Mode,
-					data | MBUF_CLUSTER_FREE_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_SEND_BD_INITIATOR:
-			data = REG_RD (pDevice, SndBdIn.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~SND_BD_IN_MODE_ENABLE;
-				REG_WR (pDevice, SndBdIn.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, SndBdIn.Mode) &
-					     SND_BD_IN_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, SndBdIn.Mode,
-					data | SND_BD_IN_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_SEND_BD_COMP:
-			data = REG_RD (pDevice, SndBdComp.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~SND_BD_COMP_MODE_ENABLE;
-				REG_WR (pDevice, SndBdComp.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, SndBdComp.Mode) &
-					     SND_BD_COMP_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, SndBdComp.Mode,
-					data | SND_BD_COMP_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_SEND_BD_SELECTOR:
-			data = REG_RD (pDevice, SndBdSel.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~SND_BD_SEL_MODE_ENABLE;
-				REG_WR (pDevice, SndBdSel.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, SndBdSel.Mode) &
-					     SND_BD_SEL_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, SndBdSel.Mode,
-					data | SND_BD_SEL_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_SEND_DATA_INITIATOR:
-			data = REG_RD (pDevice, SndDataIn.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~T3_SND_DATA_IN_MODE_ENABLE;
-				REG_WR (pDevice, SndDataIn.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, SndDataIn.Mode) &
-					     T3_SND_DATA_IN_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, SndDataIn.Mode,
-					data | T3_SND_DATA_IN_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_SEND_DATA_COMP:
-			data = REG_RD (pDevice, SndDataComp.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~SND_DATA_COMP_MODE_ENABLE;
-				REG_WR (pDevice, SndDataComp.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, SndDataComp.Mode)
-					     & SND_DATA_COMP_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, SndDataComp.Mode,
-					data | SND_DATA_COMP_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_MAC_TX_ENGINE:
-			if (cntrl == LM_DISABLE) {
-				pDevice->TxMode &= ~TX_MODE_ENABLE;
-				REG_WR (pDevice, MacCtrl.TxMode,
-					pDevice->TxMode);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, MacCtrl.TxMode) &
-					     TX_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else {
-				pDevice->TxMode |= TX_MODE_ENABLE;
-				REG_WR (pDevice, MacCtrl.TxMode,
-					pDevice->TxMode);
-			}
-			break;
-
-		case T3_BLOCK_MEM_ARBITOR:
-			data = REG_RD (pDevice, MemArbiter.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~T3_MEM_ARBITER_MODE_ENABLE;
-				REG_WR (pDevice, MemArbiter.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, MemArbiter.Mode) &
-					     T3_MEM_ARBITER_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, MemArbiter.Mode,
-					data | T3_MEM_ARBITER_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_MBUF_MANAGER:
-			data = REG_RD (pDevice, BufMgr.Mode);
-			if (cntrl == LM_DISABLE) {
-				data &= ~BUFMGR_MODE_ENABLE;
-				REG_WR (pDevice, BufMgr.Mode, data);
-				for (j = 0; j < MaxWaitCnt; j++) {
-					if (!
-					    (REG_RD (pDevice, BufMgr.Mode) &
-					     BUFMGR_MODE_ENABLE))
-						break;
-					MM_Wait (10);
-				}
-			} else
-				REG_WR (pDevice, BufMgr.Mode,
-					data | BUFMGR_MODE_ENABLE);
-			break;
-
-		case T3_BLOCK_MAC_GLOBAL:
-			if (cntrl == LM_DISABLE) {
-				pDevice->MacMode &= ~(MAC_MODE_ENABLE_TDE |
-						      MAC_MODE_ENABLE_RDE |
-						      MAC_MODE_ENABLE_FHDE);
-			} else {
-				pDevice->MacMode |= (MAC_MODE_ENABLE_TDE |
-						     MAC_MODE_ENABLE_RDE |
-						     MAC_MODE_ENABLE_FHDE);
-			}
-			REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
-			break;
-
-		default:
-			return LM_STATUS_FAILURE;
-		}		/* switch */
-
-		if (j >= MaxWaitCnt) {
-			return LM_STATUS_FAILURE;
-		}
-	}
-
-	return LM_STATUS_SUCCESS;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    This function reinitializes the adapter.                                */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-LM_STATUS LM_ResetAdapter (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_UINT32 Value32;
-	LM_UINT16 Value16;
-	LM_UINT32 j, k;
-
-	/* Disable interrupt. */
-	LM_DisableInterrupt (pDevice);
-
-	/* May get a spurious interrupt */
-	pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED;
-
-	/* Disable transmit and receive DMA engines.  Abort all pending requests. */
-	if (pDevice->InitDone) {
-		LM_Abort (pDevice);
-	}
-
-	pDevice->ShuttingDown = FALSE;
-
-	LM_ResetChip (pDevice);
-
-	/* Bug: Athlon fix for B3 silicon only.  This bit does not do anything */
-	/* in other chip revisions. */
-	if (pDevice->DelayPciGrant) {
-		Value32 = REG_RD (pDevice, PciCfg.ClockCtrl);
-		REG_WR (pDevice, PciCfg.ClockCtrl, Value32 | BIT_31);
-	}
-
-	if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) {
-		if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) {
-			Value32 = REG_RD (pDevice, PciCfg.PciState);
-			Value32 |= T3_PCI_STATE_RETRY_SAME_DMA;
-			REG_WR (pDevice, PciCfg.PciState, Value32);
-		}
-	}
-
-	/* Enable TaggedStatus mode. */
-	if (pDevice->UseTaggedStatus) {
-		pDevice->MiscHostCtrl |=
-		    MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE;
-	}
-
-	/* Restore PCI configuration registers. */
-	MM_WriteConfig32 (pDevice, PCI_CACHE_LINE_SIZE_REG,
-			  pDevice->SavedCacheLineReg);
-	MM_WriteConfig32 (pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG,
-			  (pDevice->SubsystemId << 16) | pDevice->
-			  SubsystemVendorId);
-
-	/* Clear the statistics block. */
-	for (j = 0x0300; j < 0x0b00; j++) {
-		MEM_WR_OFFSET (pDevice, j, 0);
-	}
-
-	/* Initialize the statistis Block */
-	pDevice->pStatusBlkVirt->Status = 0;
-	pDevice->pStatusBlkVirt->RcvStdConIdx = 0;
-	pDevice->pStatusBlkVirt->RcvJumboConIdx = 0;
-	pDevice->pStatusBlkVirt->RcvMiniConIdx = 0;
-
-	for (j = 0; j < 16; j++) {
-		pDevice->pStatusBlkVirt->Idx[j].RcvProdIdx = 0;
-		pDevice->pStatusBlkVirt->Idx[j].SendConIdx = 0;
-	}
-
-	for (k = 0; k < T3_STD_RCV_RCB_ENTRY_COUNT; k++) {
-		pDevice->pRxStdBdVirt[k].HostAddr.High = 0;
-		pDevice->pRxStdBdVirt[k].HostAddr.Low = 0;
-	}
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	/* Receive jumbo BD buffer. */
-	for (k = 0; k < T3_JUMBO_RCV_RCB_ENTRY_COUNT; k++) {
-		pDevice->pRxJumboBdVirt[k].HostAddr.High = 0;
-		pDevice->pRxJumboBdVirt[k].HostAddr.Low = 0;
-	}
-#endif
-
-	REG_WR (pDevice, PciCfg.DmaReadWriteCtrl, pDevice->DmaReadWriteCtrl);
-
-	/* GRC mode control register. */
-#ifdef BIG_ENDIAN_PCI		/* Jimmy, this ifdef block deleted in new code! */
-	Value32 =
-	    GRC_MODE_WORD_SWAP_DATA |
-	    GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
-	    GRC_MODE_INT_ON_MAC_ATTN | GRC_MODE_HOST_STACK_UP;
-#else
-	/* No CPU Swap modes for PCI IO */
-	Value32 =
-#ifdef BIG_ENDIAN_HOST
-	    GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
-	    GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
-	    GRC_MODE_BYTE_SWAP_DATA | GRC_MODE_WORD_SWAP_DATA |
-#else
-	    GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
-	    GRC_MODE_BYTE_SWAP_DATA | GRC_MODE_WORD_SWAP_DATA |
-#endif
-	    GRC_MODE_INT_ON_MAC_ATTN | GRC_MODE_HOST_STACK_UP;
-#endif				/* !BIG_ENDIAN_PCI */
-
-	/* Configure send BD mode. */
-	if (pDevice->NicSendBd == FALSE) {
-		Value32 |= GRC_MODE_HOST_SEND_BDS;
-	} else {
-		Value32 |= GRC_MODE_4X_NIC_BASED_SEND_RINGS;
-	}
-
-	/* Configure pseudo checksum mode. */
-	if (pDevice->NoTxPseudoHdrChksum) {
-		Value32 |= GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM;
-	}
-
-	if (pDevice->NoRxPseudoHdrChksum) {
-		Value32 |= GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM;
-	}
-
-	REG_WR (pDevice, Grc.Mode, Value32);
-
-	/* Setup the timer prescalar register. */
-	REG_WR (pDevice, Grc.MiscCfg, 65 << 1);	/* Clock is alwasy 66MHz. */
-
-	/* Set up the MBUF pool base address and size. */
-	REG_WR (pDevice, BufMgr.MbufPoolAddr, pDevice->MbufBase);
-	REG_WR (pDevice, BufMgr.MbufPoolSize, pDevice->MbufSize);
-
-	/* Set up the DMA descriptor pool base address and size. */
-	REG_WR (pDevice, BufMgr.DmaDescPoolAddr, T3_NIC_DMA_DESC_POOL_ADDR);
-	REG_WR (pDevice, BufMgr.DmaDescPoolSize, T3_NIC_DMA_DESC_POOL_SIZE);
-
-	/* Configure MBUF and Threshold watermarks */
-	/* Configure the DMA read MBUF low water mark. */
-	if (pDevice->DmaMbufLowMark) {
-		REG_WR (pDevice, BufMgr.MbufReadDmaLowWaterMark,
-			pDevice->DmaMbufLowMark);
-	} else {
-		if (pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) {
-			REG_WR (pDevice, BufMgr.MbufReadDmaLowWaterMark,
-				T3_DEF_DMA_MBUF_LOW_WMARK);
-		} else {
-			REG_WR (pDevice, BufMgr.MbufReadDmaLowWaterMark,
-				T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO);
-		}
-	}
-
-	/* Configure the MAC Rx MBUF low water mark. */
-	if (pDevice->RxMacMbufLowMark) {
-		REG_WR (pDevice, BufMgr.MbufMacRxLowWaterMark,
-			pDevice->RxMacMbufLowMark);
-	} else {
-		if (pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) {
-			REG_WR (pDevice, BufMgr.MbufMacRxLowWaterMark,
-				T3_DEF_RX_MAC_MBUF_LOW_WMARK);
-		} else {
-			REG_WR (pDevice, BufMgr.MbufMacRxLowWaterMark,
-				T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO);
-		}
-	}
-
-	/* Configure the MBUF high water mark. */
-	if (pDevice->MbufHighMark) {
-		REG_WR (pDevice, BufMgr.MbufHighWaterMark,
-			pDevice->MbufHighMark);
-	} else {
-		if (pDevice->TxMtu < MAX_ETHERNET_PACKET_BUFFER_SIZE) {
-			REG_WR (pDevice, BufMgr.MbufHighWaterMark,
-				T3_DEF_MBUF_HIGH_WMARK);
-		} else {
-			REG_WR (pDevice, BufMgr.MbufHighWaterMark,
-				T3_DEF_MBUF_HIGH_WMARK_JUMBO);
-		}
-	}
-
-	REG_WR (pDevice, BufMgr.DmaLowWaterMark, T3_DEF_DMA_DESC_LOW_WMARK);
-	REG_WR (pDevice, BufMgr.DmaHighWaterMark, T3_DEF_DMA_DESC_HIGH_WMARK);
-
-	/* Enable buffer manager. */
-	REG_WR (pDevice, BufMgr.Mode,
-		BUFMGR_MODE_ENABLE | BUFMGR_MODE_ATTN_ENABLE);
-
-	for (j = 0; j < 2000; j++) {
-		if (REG_RD (pDevice, BufMgr.Mode) & BUFMGR_MODE_ENABLE)
-			break;
-		MM_Wait (10);
-	}
-
-	if (j >= 2000) {
-		return LM_STATUS_FAILURE;
-	}
-
-	/* Enable the FTQs. */
-	REG_WR (pDevice, Ftq.Reset, 0xffffffff);
-	REG_WR (pDevice, Ftq.Reset, 0);
-
-	/* Wait until FTQ is ready */
-	for (j = 0; j < 2000; j++) {
-		if (REG_RD (pDevice, Ftq.Reset) == 0)
-			break;
-		MM_Wait (10);
-	}
-
-	if (j >= 2000) {
-		return LM_STATUS_FAILURE;
-	}
-
-	/* Initialize the Standard Receive RCB. */
-	REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.High,
-		pDevice->RxStdBdPhy.High);
-	REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.HostRingAddr.Low,
-		pDevice->RxStdBdPhy.Low);
-	REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.u.MaxLen_Flags,
-		MAX_STD_RCV_BUFFER_SIZE << 16);
-
-	/* Initialize the Jumbo Receive RCB. */
-	REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags,
-		T3_RCB_FLAG_RING_DISABLED);
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.High,
-		pDevice->RxJumboBdPhy.High);
-	REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.HostRingAddr.Low,
-		pDevice->RxJumboBdPhy.Low);
-
-	REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.u.MaxLen_Flags, 0);
-
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-	/* Initialize the Mini Receive RCB. */
-	REG_WR (pDevice, RcvDataBdIn.MiniRcvRcb.u.MaxLen_Flags,
-		T3_RCB_FLAG_RING_DISABLED);
-
-	{
-		REG_WR (pDevice, RcvDataBdIn.StdRcvRcb.NicRingAddr,
-			(LM_UINT32) T3_NIC_STD_RCV_BUFFER_DESC_ADDR);
-		REG_WR (pDevice, RcvDataBdIn.JumboRcvRcb.NicRingAddr,
-			(LM_UINT32) T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR);
-	}
-
-	/* Receive BD Ring replenish threshold. */
-	REG_WR (pDevice, RcvBdIn.StdRcvThreshold, pDevice->RxStdDescCnt / 8);
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	REG_WR (pDevice, RcvBdIn.JumboRcvThreshold,
-		pDevice->RxJumboDescCnt / 8);
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-	/* Disable all the unused rings. */
-	for (j = 0; j < T3_MAX_SEND_RCB_COUNT; j++) {
-		MEM_WR (pDevice, SendRcb[j].u.MaxLen_Flags,
-			T3_RCB_FLAG_RING_DISABLED);
-	}			/* for */
-
-	/* Initialize the indices. */
-	pDevice->SendProdIdx = 0;
-	pDevice->SendConIdx = 0;
-
-	MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low, 0);
-	MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, 0);
-
-	/* Set up host or NIC based send RCB. */
-	if (pDevice->NicSendBd == FALSE) {
-		MEM_WR (pDevice, SendRcb[0].HostRingAddr.High,
-			pDevice->SendBdPhy.High);
-		MEM_WR (pDevice, SendRcb[0].HostRingAddr.Low,
-			pDevice->SendBdPhy.Low);
-
-		/* Set up the NIC ring address in the RCB. */
-		MEM_WR (pDevice, SendRcb[0].NicRingAddr,
-			T3_NIC_SND_BUFFER_DESC_ADDR);
-
-		/* Setup the RCB. */
-		MEM_WR (pDevice, SendRcb[0].u.MaxLen_Flags,
-			T3_SEND_RCB_ENTRY_COUNT << 16);
-
-		for (k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++) {
-			pDevice->pSendBdVirt[k].HostAddr.High = 0;
-			pDevice->pSendBdVirt[k].HostAddr.Low = 0;
-		}
-	} else {
-		MEM_WR (pDevice, SendRcb[0].HostRingAddr.High, 0);
-		MEM_WR (pDevice, SendRcb[0].HostRingAddr.Low, 0);
-		MEM_WR (pDevice, SendRcb[0].NicRingAddr,
-			pDevice->SendBdPhy.Low);
-
-		for (k = 0; k < T3_SEND_RCB_ENTRY_COUNT; k++) {
-			__raw_writel (0,
-				      &(pDevice->pSendBdVirt[k].HostAddr.High));
-			__raw_writel (0,
-				      &(pDevice->pSendBdVirt[k].HostAddr.Low));
-			__raw_writel (0,
-				      &(pDevice->pSendBdVirt[k].u1.Len_Flags));
-			pDevice->ShadowSendBd[k].HostAddr.High = 0;
-			pDevice->ShadowSendBd[k].u1.Len_Flags = 0;
-		}
-	}
-	atomic_set (&pDevice->SendBdLeft, T3_SEND_RCB_ENTRY_COUNT - 1);
-
-	/* Configure the receive return rings. */
-	for (j = 0; j < T3_MAX_RCV_RETURN_RCB_COUNT; j++) {
-		MEM_WR (pDevice, RcvRetRcb[j].u.MaxLen_Flags,
-			T3_RCB_FLAG_RING_DISABLED);
-	}
-
-	pDevice->RcvRetConIdx = 0;
-
-	MEM_WR (pDevice, RcvRetRcb[0].HostRingAddr.High,
-		pDevice->RcvRetBdPhy.High);
-	MEM_WR (pDevice, RcvRetRcb[0].HostRingAddr.Low,
-		pDevice->RcvRetBdPhy.Low);
-
-	/* Set up the NIC ring address in the RCB. */
-	/* Not very clear from the spec.  I am guessing that for Receive */
-	/* Return Ring, NicRingAddr is not used. */
-	MEM_WR (pDevice, RcvRetRcb[0].NicRingAddr, 0);
-
-	/* Setup the RCB. */
-	MEM_WR (pDevice, RcvRetRcb[0].u.MaxLen_Flags,
-		T3_RCV_RETURN_RCB_ENTRY_COUNT << 16);
-
-	/* Reinitialize RX ring producer index */
-	MB_REG_WR (pDevice, Mailbox.RcvStdProdIdx.Low, 0);
-	MB_REG_WR (pDevice, Mailbox.RcvJumboProdIdx.Low, 0);
-	MB_REG_WR (pDevice, Mailbox.RcvMiniProdIdx.Low, 0);
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	pDevice->RxJumboProdIdx = 0;
-	pDevice->RxJumboQueuedCnt = 0;
-#endif
-
-	/* Reinitialize our copy of the indices. */
-	pDevice->RxStdProdIdx = 0;
-	pDevice->RxStdQueuedCnt = 0;
-
-#if T3_JUMBO_RCV_ENTRY_COUNT
-	pDevice->RxJumboProdIdx = 0;
-#endif				/* T3_JUMBO_RCV_ENTRY_COUNT */
-
-	/* Configure the MAC address. */
-	LM_SetMacAddress (pDevice);
-
-	/* Initialize the transmit random backoff seed. */
-	Value32 = (pDevice->NodeAddress[0] + pDevice->NodeAddress[1] +
-		   pDevice->NodeAddress[2] + pDevice->NodeAddress[3] +
-		   pDevice->NodeAddress[4] + pDevice->NodeAddress[5]) &
-	    MAC_TX_BACKOFF_SEED_MASK;
-	REG_WR (pDevice, MacCtrl.TxBackoffSeed, Value32);
-
-	/* Receive MTU.  Frames larger than the MTU is marked as oversized. */
-	REG_WR (pDevice, MacCtrl.MtuSize, pDevice->RxMtu + 8);	/* CRC + VLAN. */
-
-	/* Configure Time slot/IPG per 802.3 */
-	REG_WR (pDevice, MacCtrl.TxLengths, 0x2620);
-
-	/*
-	 * Configure Receive Rules so that packets don't match
-	 * Programmble rule will be queued to Return Ring 1
-	 */
-	REG_WR (pDevice, MacCtrl.RcvRuleCfg, RX_RULE_DEFAULT_CLASS);
-
-	/*
-	 * Configure to have 16 Classes of Services (COS) and one
-	 * queue per class.  Bad frames are queued to RRR#1.
-	 * And frames don't match rules are also queued to COS#1.
-	 */
-	REG_WR (pDevice, RcvListPlmt.Config, 0x181);
-
-	/* Enable Receive Placement Statistics */
-	REG_WR (pDevice, RcvListPlmt.StatsEnableMask, 0xffffff);
-	REG_WR (pDevice, RcvListPlmt.StatsCtrl, RCV_LIST_STATS_ENABLE);
-
-	/* Enable Send Data Initator Statistics */
-	REG_WR (pDevice, SndDataIn.StatsEnableMask, 0xffffff);
-	REG_WR (pDevice, SndDataIn.StatsCtrl,
-		T3_SND_DATA_IN_STATS_CTRL_ENABLE |
-		T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE);
-
-	/* Disable the host coalescing state machine before configuring it's */
-	/* parameters. */
-	REG_WR (pDevice, HostCoalesce.Mode, 0);
-	for (j = 0; j < 2000; j++) {
-		Value32 = REG_RD (pDevice, HostCoalesce.Mode);
-		if (!(Value32 & HOST_COALESCE_ENABLE)) {
-			break;
-		}
-		MM_Wait (10);
-	}
-
-	/* Host coalescing configurations. */
-	REG_WR (pDevice, HostCoalesce.RxCoalescingTicks,
-		pDevice->RxCoalescingTicks);
-	REG_WR (pDevice, HostCoalesce.TxCoalescingTicks,
-		pDevice->TxCoalescingTicks);
-	REG_WR (pDevice, HostCoalesce.RxMaxCoalescedFrames,
-		pDevice->RxMaxCoalescedFrames);
-	REG_WR (pDevice, HostCoalesce.TxMaxCoalescedFrames,
-		pDevice->TxMaxCoalescedFrames);
-	REG_WR (pDevice, HostCoalesce.RxCoalescedTickDuringInt,
-		pDevice->RxCoalescingTicksDuringInt);
-	REG_WR (pDevice, HostCoalesce.TxCoalescedTickDuringInt,
-		pDevice->TxCoalescingTicksDuringInt);
-	REG_WR (pDevice, HostCoalesce.RxMaxCoalescedFramesDuringInt,
-		pDevice->RxMaxCoalescedFramesDuringInt);
-	REG_WR (pDevice, HostCoalesce.TxMaxCoalescedFramesDuringInt,
-		pDevice->TxMaxCoalescedFramesDuringInt);
-
-	/* Initialize the address of the status block.  The NIC will DMA */
-	/* the status block to this memory which resides on the host. */
-	REG_WR (pDevice, HostCoalesce.StatusBlkHostAddr.High,
-		pDevice->StatusBlkPhy.High);
-	REG_WR (pDevice, HostCoalesce.StatusBlkHostAddr.Low,
-		pDevice->StatusBlkPhy.Low);
-
-	/* Initialize the address of the statistics block.  The NIC will DMA */
-	/* the statistics to this block of memory. */
-	REG_WR (pDevice, HostCoalesce.StatsBlkHostAddr.High,
-		pDevice->StatsBlkPhy.High);
-	REG_WR (pDevice, HostCoalesce.StatsBlkHostAddr.Low,
-		pDevice->StatsBlkPhy.Low);
-
-	REG_WR (pDevice, HostCoalesce.StatsCoalescingTicks,
-		pDevice->StatsCoalescingTicks);
-
-	REG_WR (pDevice, HostCoalesce.StatsBlkNicAddr, 0x300);
-	REG_WR (pDevice, HostCoalesce.StatusBlkNicAddr, 0xb00);
-
-	/* Enable Host Coalesing state machine */
-	REG_WR (pDevice, HostCoalesce.Mode, HOST_COALESCE_ENABLE |
-		pDevice->CoalesceMode);
-
-	/* Enable the Receive BD Completion state machine. */
-	REG_WR (pDevice, RcvBdComp.Mode, RCV_BD_COMP_MODE_ENABLE |
-		RCV_BD_COMP_MODE_ATTN_ENABLE);
-
-	/* Enable the Receive List Placement state machine. */
-	REG_WR (pDevice, RcvListPlmt.Mode, RCV_LIST_PLMT_MODE_ENABLE);
-
-	/* Enable the Receive List Selector state machine. */
-	REG_WR (pDevice, RcvListSel.Mode, RCV_LIST_SEL_MODE_ENABLE |
-		RCV_LIST_SEL_MODE_ATTN_ENABLE);
-
-	/* Enable transmit DMA, clear statistics. */
-	pDevice->MacMode = MAC_MODE_ENABLE_TX_STATISTICS |
-	    MAC_MODE_ENABLE_RX_STATISTICS | MAC_MODE_ENABLE_TDE |
-	    MAC_MODE_ENABLE_RDE | MAC_MODE_ENABLE_FHDE;
-	REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode |
-		MAC_MODE_CLEAR_RX_STATISTICS | MAC_MODE_CLEAR_TX_STATISTICS);
-
-	/* GRC miscellaneous local control register. */
-	pDevice->GrcLocalCtrl = GRC_MISC_LOCAL_CTRL_INT_ON_ATTN |
-	    GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM;
-
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-		pDevice->GrcLocalCtrl |= GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
-		    GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1;
-	}
-
-	REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl);
-	MM_Wait (40);
-
-	/* Reset RX counters. */
-	for (j = 0; j < sizeof (LM_RX_COUNTERS); j++) {
-		((PLM_UINT8) & pDevice->RxCounters)[j] = 0;
-	}
-
-	/* Reset TX counters. */
-	for (j = 0; j < sizeof (LM_TX_COUNTERS); j++) {
-		((PLM_UINT8) & pDevice->TxCounters)[j] = 0;
-	}
-
-	MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 0);
-
-	/* Enable the DMA Completion state machine. */
-	REG_WR (pDevice, DmaComp.Mode, DMA_COMP_MODE_ENABLE);
-
-	/* Enable the DMA Write state machine. */
-	Value32 = DMA_WRITE_MODE_ENABLE |
-	    DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE |
-	    DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE |
-	    DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE |
-	    DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
-	    DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE |
-	    DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
-	    DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE |
-	    DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE;
-	REG_WR (pDevice, DmaWrite.Mode, Value32);
-
-	if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) {
-		if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) {
-			Value16 = REG_RD (pDevice, PciCfg.PciXCommand);
-			Value16 &=
-			    ~(PCIX_CMD_MAX_SPLIT_MASK |
-			      PCIX_CMD_MAX_BURST_MASK);
-			Value16 |=
-			    ((PCIX_CMD_MAX_BURST_CPIOB <<
-			      PCIX_CMD_MAX_BURST_SHL) &
-			     PCIX_CMD_MAX_BURST_MASK);
-			if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE) {
-				Value16 |=
-				    (pDevice->
-				     SplitModeMaxReq << PCIX_CMD_MAX_SPLIT_SHL)
-				    & PCIX_CMD_MAX_SPLIT_MASK;
-			}
-			REG_WR (pDevice, PciCfg.PciXCommand, Value16);
-		}
-	}
-
-	/* Enable the Read DMA state machine. */
-	Value32 = DMA_READ_MODE_ENABLE |
-	    DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE |
-	    DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE |
-	    DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE |
-	    DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE |
-	    DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE |
-	    DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE |
-	    DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE |
-	    DMA_READ_MODE_LONG_READ_ATTN_ENABLE;
-
-	if (pDevice->SplitModeEnable == SPLIT_MODE_ENABLE) {
-		Value32 |= DMA_READ_MODE_SPLIT_ENABLE;
-	}
-	REG_WR (pDevice, DmaRead.Mode, Value32);
-
-	/* Enable the Receive Data Completion state machine. */
-	REG_WR (pDevice, RcvDataComp.Mode, RCV_DATA_COMP_MODE_ENABLE |
-		RCV_DATA_COMP_MODE_ATTN_ENABLE);
-
-	/* Enable the Mbuf Cluster Free state machine. */
-	REG_WR (pDevice, MbufClusterFree.Mode, MBUF_CLUSTER_FREE_MODE_ENABLE);
-
-	/* Enable the Send Data Completion state machine. */
-	REG_WR (pDevice, SndDataComp.Mode, SND_DATA_COMP_MODE_ENABLE);
-
-	/* Enable the Send BD Completion state machine. */
-	REG_WR (pDevice, SndBdComp.Mode, SND_BD_COMP_MODE_ENABLE |
-		SND_BD_COMP_MODE_ATTN_ENABLE);
-
-	/* Enable the Receive BD Initiator state machine. */
-	REG_WR (pDevice, RcvBdIn.Mode, RCV_BD_IN_MODE_ENABLE |
-		RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE);
-
-	/* Enable the Receive Data and Receive BD Initiator state machine. */
-	REG_WR (pDevice, RcvDataBdIn.Mode, RCV_DATA_BD_IN_MODE_ENABLE |
-		RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE);
-
-	/* Enable the Send Data Initiator state machine. */
-	REG_WR (pDevice, SndDataIn.Mode, T3_SND_DATA_IN_MODE_ENABLE);
-
-	/* Enable the Send BD Initiator state machine. */
-	REG_WR (pDevice, SndBdIn.Mode, SND_BD_IN_MODE_ENABLE |
-		SND_BD_IN_MODE_ATTN_ENABLE);
-
-	/* Enable the Send BD Selector state machine. */
-	REG_WR (pDevice, SndBdSel.Mode, SND_BD_SEL_MODE_ENABLE |
-		SND_BD_SEL_MODE_ATTN_ENABLE);
-
-#if INCLUDE_5701_AX_FIX
-	/* Load the firmware for the 5701_A0 workaround. */
-	if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0) {
-		LM_LoadRlsFirmware (pDevice);
-	}
-#endif
-
-	/* Enable the transmitter. */
-	pDevice->TxMode = TX_MODE_ENABLE;
-	REG_WR (pDevice, MacCtrl.TxMode, pDevice->TxMode);
-
-	/* Enable the receiver. */
-	pDevice->RxMode = RX_MODE_ENABLE;
-	REG_WR (pDevice, MacCtrl.RxMode, pDevice->RxMode);
-
-	if (pDevice->RestoreOnWakeUp) {
-		pDevice->RestoreOnWakeUp = FALSE;
-		pDevice->DisableAutoNeg = pDevice->WakeUpDisableAutoNeg;
-		pDevice->RequestedMediaType = pDevice->WakeUpRequestedMediaType;
-	}
-
-	/* Disable auto polling. */
-	pDevice->MiMode = 0xc0000;
-	REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
-
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-	    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-		Value32 = LED_CTRL_PHY_MODE_1;
-	} else {
-		if (pDevice->LedMode == LED_MODE_OUTPUT) {
-			Value32 = LED_CTRL_PHY_MODE_2;
-		} else {
-			Value32 = LED_CTRL_PHY_MODE_1;
-		}
-	}
-	REG_WR (pDevice, MacCtrl.LedCtrl, Value32);
-
-	/* Activate Link to enable MAC state machine */
-	REG_WR (pDevice, MacCtrl.MiStatus, MI_STATUS_ENABLE_LINK_STATUS_ATTN);
-
-	if (pDevice->EnableTbi) {
-		REG_WR (pDevice, MacCtrl.RxMode, RX_MODE_RESET);
-		MM_Wait (10);
-		REG_WR (pDevice, MacCtrl.RxMode, pDevice->RxMode);
-		if (pDevice->ChipRevId == T3_CHIP_ID_5703_A1) {
-			REG_WR (pDevice, MacCtrl.SerdesCfg, 0x616000);
-		}
-	}
-	/* Setup the phy chip. */
-	LM_SetupPhy (pDevice);
-
-	if (!pDevice->EnableTbi) {
-		/* Clear CRC stats */
-		LM_ReadPhy (pDevice, 0x1e, &Value32);
-		LM_WritePhy (pDevice, 0x1e, Value32 | 0x8000);
-		LM_ReadPhy (pDevice, 0x14, &Value32);
-	}
-
-	/* Set up the receive mask. */
-	LM_SetReceiveMask (pDevice, pDevice->ReceiveMask);
-
-	/* Queue Rx packet buffers. */
-	if (pDevice->QueueRxPackets) {
-		LM_QueueRxPackets (pDevice);
-	}
-
-	/* Enable interrupt to the host. */
-	if (pDevice->InitDone) {
-		LM_EnableInterrupt (pDevice);
-	}
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_ResetAdapter */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    This routine disables the adapter from generating interrupts.           */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-LM_STATUS LM_DisableInterrupt (PLM_DEVICE_BLOCK pDevice)
-{
-	REG_WR (pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl |
-		MISC_HOST_CTRL_MASK_PCI_INT);
-	MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 1);
-
-	return LM_STATUS_SUCCESS;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    This routine enables the adapter to generate interrupts.                */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-LM_STATUS LM_EnableInterrupt (PLM_DEVICE_BLOCK pDevice)
-{
-	REG_WR (pDevice, PciCfg.MiscHostCtrl, pDevice->MiscHostCtrl &
-		~MISC_HOST_CTRL_MASK_PCI_INT);
-	MB_REG_WR (pDevice, Mailbox.Interrupt[0].Low, 0);
-
-	if (pDevice->pStatusBlkVirt->Status & STATUS_BLOCK_UPDATED) {
-		REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
-			GRC_MISC_LOCAL_CTRL_SET_INT);
-	}
-
-	return LM_STATUS_SUCCESS;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    This routine puts a packet on the wire if there is a transmit DMA       */
-/*    descriptor available; otherwise the packet is queued for later          */
-/*    transmission.  If the second argue is NULL, this routine will put       */
-/*    the queued packet on the wire if possible.                              */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-#if 0
-LM_STATUS LM_SendPacket (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
-{
-	LM_UINT32 FragCount;
-	PT3_SND_BD pSendBd;
-	PT3_SND_BD pShadowSendBd;
-	LM_UINT32 Value32, Len;
-	LM_UINT32 Idx;
-
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-		return LM_5700SendPacket (pDevice, pPacket);
-	}
-
-	/* Update the SendBdLeft count. */
-	atomic_sub (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
-
-	/* Initalize the send buffer descriptors. */
-	Idx = pDevice->SendProdIdx;
-
-	pSendBd = &pDevice->pSendBdVirt[Idx];
-
-	/* Next producer index. */
-	if (pDevice->NicSendBd == TRUE) {
-		T3_64BIT_HOST_ADDR paddr;
-
-		pShadowSendBd = &pDevice->ShadowSendBd[Idx];
-		for (FragCount = 0;;) {
-			MM_MapTxDma (pDevice, pPacket, &paddr, &Len, FragCount);
-			/* Initialize the pointer to the send buffer fragment. */
-			if (paddr.High != pShadowSendBd->HostAddr.High) {
-				__raw_writel (paddr.High,
-					      &(pSendBd->HostAddr.High));
-				pShadowSendBd->HostAddr.High = paddr.High;
-			}
-			__raw_writel (paddr.Low, &(pSendBd->HostAddr.Low));
-
-			/* Setup the control flags and send buffer size. */
-			Value32 = (Len << 16) | pPacket->Flags;
-
-			Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
-
-			FragCount++;
-			if (FragCount >= pPacket->u.Tx.FragCount) {
-				Value32 |= SND_BD_FLAG_END;
-				if (Value32 != pShadowSendBd->u1.Len_Flags) {
-					__raw_writel (Value32,
-						      &(pSendBd->u1.Len_Flags));
-					pShadowSendBd->u1.Len_Flags = Value32;
-				}
-				if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) {
-					__raw_writel (pPacket->VlanTag,
-						      &(pSendBd->u2.VlanTag));
-				}
-				break;
-			} else {
-				if (Value32 != pShadowSendBd->u1.Len_Flags) {
-					__raw_writel (Value32,
-						      &(pSendBd->u1.Len_Flags));
-					pShadowSendBd->u1.Len_Flags = Value32;
-				}
-				if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) {
-					__raw_writel (pPacket->VlanTag,
-						      &(pSendBd->u2.VlanTag));
-				}
-			}
-
-			pSendBd++;
-			pShadowSendBd++;
-			if (Idx == 0) {
-				pSendBd = &pDevice->pSendBdVirt[0];
-				pShadowSendBd = &pDevice->ShadowSendBd[0];
-			}
-		}		/* for */
-
-		/* Put the packet descriptor in the ActiveQ. */
-		QQ_PushTail (&pDevice->TxPacketActiveQ.Container, pPacket);
-
-		wmb ();
-		MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
-
-	} else {
-		for (FragCount = 0;;) {
-			/* Initialize the pointer to the send buffer fragment. */
-			MM_MapTxDma (pDevice, pPacket, &pSendBd->HostAddr, &Len,
-				     FragCount);
-
-			pSendBd->u2.VlanTag = pPacket->VlanTag;
-
-			/* Setup the control flags and send buffer size. */
-			Value32 = (Len << 16) | pPacket->Flags;
-
-			Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
-
-			FragCount++;
-			if (FragCount >= pPacket->u.Tx.FragCount) {
-				pSendBd->u1.Len_Flags =
-				    Value32 | SND_BD_FLAG_END;
-				break;
-			} else {
-				pSendBd->u1.Len_Flags = Value32;
-			}
-			pSendBd++;
-			if (Idx == 0) {
-				pSendBd = &pDevice->pSendBdVirt[0];
-			}
-		}		/* for */
-
-		/* Put the packet descriptor in the ActiveQ. */
-		QQ_PushTail (&pDevice->TxPacketActiveQ.Container, pPacket);
-
-		wmb ();
-		MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
-
-	}
-
-	/* Update the producer index. */
-	pDevice->SendProdIdx = Idx;
-
-	return LM_STATUS_SUCCESS;
-}
-#endif
-
-LM_STATUS LM_SendPacket (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket)
-{
-	LM_UINT32 FragCount;
-	PT3_SND_BD pSendBd, pTmpSendBd, pShadowSendBd;
-	T3_SND_BD NicSendBdArr[MAX_FRAGMENT_COUNT];
-	LM_UINT32 StartIdx, Idx;
-
-	while (1) {
-		/* Initalize the send buffer descriptors. */
-		StartIdx = Idx = pDevice->SendProdIdx;
-
-		if (pDevice->NicSendBd) {
-			pTmpSendBd = pSendBd = &NicSendBdArr[0];
-		} else {
-			pTmpSendBd = pSendBd = &pDevice->pSendBdVirt[Idx];
-		}
-
-		/* Next producer index. */
-		for (FragCount = 0;;) {
-			LM_UINT32 Value32, Len;
-
-			/* Initialize the pointer to the send buffer fragment. */
-			MM_MapTxDma (pDevice, pPacket, &pSendBd->HostAddr, &Len,
-				     FragCount);
-
-			pSendBd->u2.VlanTag = pPacket->VlanTag;
-
-			/* Setup the control flags and send buffer size. */
-			Value32 = (Len << 16) | pPacket->Flags;
-
-			Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
-
-			FragCount++;
-			if (FragCount >= pPacket->u.Tx.FragCount) {
-				pSendBd->u1.Len_Flags =
-				    Value32 | SND_BD_FLAG_END;
-				break;
-			} else {
-				pSendBd->u1.Len_Flags = Value32;
-			}
-			pSendBd++;
-			if ((Idx == 0) && !pDevice->NicSendBd) {
-				pSendBd = &pDevice->pSendBdVirt[0];
-			}
-		}		/* for */
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-			if (LM_Test4GBoundary (pDevice, pPacket, pTmpSendBd) ==
-			    LM_STATUS_SUCCESS) {
-				if (MM_CoalesceTxBuffer (pDevice, pPacket) !=
-				    LM_STATUS_SUCCESS) {
-					QQ_PushHead (&pDevice->TxPacketFreeQ.
-						     Container, pPacket);
-					return LM_STATUS_FAILURE;
-				}
-				continue;
-			}
-		}
-		break;
-	}
-	/* Put the packet descriptor in the ActiveQ. */
-	QQ_PushTail (&pDevice->TxPacketActiveQ.Container, pPacket);
-
-	if (pDevice->NicSendBd) {
-		pSendBd = &pDevice->pSendBdVirt[StartIdx];
-		pShadowSendBd = &pDevice->ShadowSendBd[StartIdx];
-
-		while (StartIdx != Idx) {
-			LM_UINT32 Value32;
-
-			if ((Value32 = pTmpSendBd->HostAddr.High) !=
-			    pShadowSendBd->HostAddr.High) {
-				__raw_writel (Value32,
-					      &(pSendBd->HostAddr.High));
-				pShadowSendBd->HostAddr.High = Value32;
-			}
-
-			__raw_writel (pTmpSendBd->HostAddr.Low,
-				      &(pSendBd->HostAddr.Low));
-
-			if ((Value32 = pTmpSendBd->u1.Len_Flags) !=
-			    pShadowSendBd->u1.Len_Flags) {
-				__raw_writel (Value32,
-					      &(pSendBd->u1.Len_Flags));
-				pShadowSendBd->u1.Len_Flags = Value32;
-			}
-
-			if (pPacket->Flags & SND_BD_FLAG_VLAN_TAG) {
-				__raw_writel (pTmpSendBd->u2.VlanTag,
-					      &(pSendBd->u2.VlanTag));
-			}
-
-			StartIdx =
-			    (StartIdx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
-			if (StartIdx == 0)
-				pSendBd = &pDevice->pSendBdVirt[0];
-			else
-				pSendBd++;
-			pTmpSendBd++;
-		}
-		wmb ();
-		MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
-
-		if (T3_CHIP_REV (pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) {
-			MB_REG_WR (pDevice, Mailbox.SendNicProdIdx[0].Low, Idx);
-		}
-	} else {
-		wmb ();
-		MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low, Idx);
-
-		if (T3_CHIP_REV (pDevice->ChipRevId) == T3_CHIP_REV_5700_BX) {
-			MB_REG_WR (pDevice, Mailbox.SendHostProdIdx[0].Low,
-				   Idx);
-		}
-	}
-
-	/* Update the SendBdLeft count. */
-	atomic_sub (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
-
-	/* Update the producer index. */
-	pDevice->SendProdIdx = Idx;
-
-	return LM_STATUS_SUCCESS;
-}
-
-STATIC LM_STATUS
-LM_Test4GBoundary (PLM_DEVICE_BLOCK pDevice, PLM_PACKET pPacket,
-		   PT3_SND_BD pSendBd)
-{
-	int FragCount;
-	LM_UINT32 Idx, Base, Len;
-
-	Idx = pDevice->SendProdIdx;
-	for (FragCount = 0;;) {
-		Len = pSendBd->u1.Len_Flags >> 16;
-		if (((Base = pSendBd->HostAddr.Low) > 0xffffdcc0) &&
-		    (pSendBd->HostAddr.High == 0) &&
-		    ((Base + 8 + Len) < Base)) {
-			return LM_STATUS_SUCCESS;
-		}
-		FragCount++;
-		if (FragCount >= pPacket->u.Tx.FragCount) {
-			break;
-		}
-		pSendBd++;
-		if (!pDevice->NicSendBd) {
-			Idx = (Idx + 1) & T3_SEND_RCB_ENTRY_COUNT_MASK;
-			if (Idx == 0) {
-				pSendBd = &pDevice->pSendBdVirt[0];
-			}
-		}
-	}
-	return LM_STATUS_FAILURE;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-__inline static unsigned long
-ComputeCrc32 (unsigned char *pBuffer, unsigned long BufferSize)
-{
-	unsigned long Reg;
-	unsigned long Tmp;
-	unsigned long j, k;
-
-	Reg = 0xffffffff;
-
-	for (j = 0; j < BufferSize; j++) {
-		Reg ^= pBuffer[j];
-
-		for (k = 0; k < 8; k++) {
-			Tmp = Reg & 0x01;
-
-			Reg >>= 1;
-
-			if (Tmp) {
-				Reg ^= 0xedb88320;
-			}
-		}
-	}
-
-	return ~Reg;
-}				/* ComputeCrc32 */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    This routine sets the receive control register according to ReceiveMask */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-LM_STATUS LM_SetReceiveMask (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Mask)
-{
-	LM_UINT32 ReceiveMask;
-	LM_UINT32 RxMode;
-	LM_UINT32 j, k;
-
-	ReceiveMask = Mask;
-
-	RxMode = pDevice->RxMode;
-
-	if (Mask & LM_ACCEPT_UNICAST) {
-		Mask &= ~LM_ACCEPT_UNICAST;
-	}
-
-	if (Mask & LM_ACCEPT_MULTICAST) {
-		Mask &= ~LM_ACCEPT_MULTICAST;
-	}
-
-	if (Mask & LM_ACCEPT_ALL_MULTICAST) {
-		Mask &= ~LM_ACCEPT_ALL_MULTICAST;
-	}
-
-	if (Mask & LM_ACCEPT_BROADCAST) {
-		Mask &= ~LM_ACCEPT_BROADCAST;
-	}
-
-	RxMode &= ~RX_MODE_PROMISCUOUS_MODE;
-	if (Mask & LM_PROMISCUOUS_MODE) {
-		RxMode |= RX_MODE_PROMISCUOUS_MODE;
-		Mask &= ~LM_PROMISCUOUS_MODE;
-	}
-
-	RxMode &= ~(RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED);
-	if (Mask & LM_ACCEPT_ERROR_PACKET) {
-		RxMode |= RX_MODE_ACCEPT_RUNTS | RX_MODE_ACCEPT_OVERSIZED;
-		Mask &= ~LM_ACCEPT_ERROR_PACKET;
-	}
-
-	/* Make sure all the bits are valid before committing changes. */
-	if (Mask) {
-		return LM_STATUS_FAILURE;
-	}
-
-	/* Commit the new filter. */
-	pDevice->RxMode = RxMode;
-	REG_WR (pDevice, MacCtrl.RxMode, RxMode);
-
-	pDevice->ReceiveMask = ReceiveMask;
-
-	/* Set up the MC hash table. */
-	if (ReceiveMask & LM_ACCEPT_ALL_MULTICAST) {
-		for (k = 0; k < 4; k++) {
-			REG_WR (pDevice, MacCtrl.HashReg[k], 0xffffffff);
-		}
-	} else if (ReceiveMask & LM_ACCEPT_MULTICAST) {
-		LM_UINT32 HashReg[4];
-
-		HashReg[0] = 0;
-		HashReg[1] = 0;
-		HashReg[2] = 0;
-		HashReg[3] = 0;
-		for (j = 0; j < pDevice->McEntryCount; j++) {
-			LM_UINT32 RegIndex;
-			LM_UINT32 Bitpos;
-			LM_UINT32 Crc32;
-
-			Crc32 =
-			    ComputeCrc32 (pDevice->McTable[j],
-					  ETHERNET_ADDRESS_SIZE);
-
-			/* The most significant 7 bits of the CRC32 (no inversion), */
-			/* are used to index into one of the possible 128 bit positions. */
-			Bitpos = ~Crc32 & 0x7f;
-
-			/* Hash register index. */
-			RegIndex = (Bitpos & 0x60) >> 5;
-
-			/* Bit to turn on within a hash register. */
-			Bitpos &= 0x1f;
-
-			/* Enable the multicast bit. */
-			HashReg[RegIndex] |= (1 << Bitpos);
-		}
-
-		/* REV_AX has problem with multicast filtering where it uses both */
-		/* DA and SA to perform hashing. */
-		for (k = 0; k < 4; k++) {
-			REG_WR (pDevice, MacCtrl.HashReg[k], HashReg[k]);
-		}
-	} else {
-		/* Reject all multicast frames. */
-		for (j = 0; j < 4; j++) {
-			REG_WR (pDevice, MacCtrl.HashReg[j], 0);
-		}
-	}
-
-	/* By default, Tigon3 will accept broadcast frames.  We need to setup */
-	if (ReceiveMask & LM_ACCEPT_BROADCAST) {
-		REG_WR (pDevice,
-			MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule,
-			REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK);
-		REG_WR (pDevice,
-			MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value,
-			REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK);
-		REG_WR (pDevice,
-			MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule,
-			REJECT_BROADCAST_RULE1_RULE & RCV_DISABLE_RULE_MASK);
-		REG_WR (pDevice,
-			MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value,
-			REJECT_BROADCAST_RULE1_VALUE & RCV_DISABLE_RULE_MASK);
-	} else {
-		REG_WR (pDevice,
-			MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Rule,
-			REJECT_BROADCAST_RULE1_RULE);
-		REG_WR (pDevice,
-			MacCtrl.RcvRules[RCV_RULE1_REJECT_BROADCAST_IDX].Value,
-			REJECT_BROADCAST_RULE1_VALUE);
-		REG_WR (pDevice,
-			MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Rule,
-			REJECT_BROADCAST_RULE2_RULE);
-		REG_WR (pDevice,
-			MacCtrl.RcvRules[RCV_RULE2_REJECT_BROADCAST_IDX].Value,
-			REJECT_BROADCAST_RULE2_VALUE);
-	}
-
-	/* disable the rest of the rules. */
-	for (j = RCV_LAST_RULE_IDX; j < 16; j++) {
-		REG_WR (pDevice, MacCtrl.RcvRules[j].Rule, 0);
-		REG_WR (pDevice, MacCtrl.RcvRules[j].Value, 0);
-	}
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_SetReceiveMask */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    Disable the interrupt and put the transmitter and receiver engines in   */
-/*    an idle state.  Also aborts all pending send requests and receive       */
-/*    buffers.                                                                */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-LM_STATUS LM_Abort (PLM_DEVICE_BLOCK pDevice)
-{
-	PLM_PACKET pPacket;
-	LM_UINT Idx;
-
-	LM_DisableInterrupt (pDevice);
-
-	/* Disable all the state machines. */
-	LM_CntrlBlock (pDevice, T3_BLOCK_MAC_RX_ENGINE, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_RX_BD_INITIATOR, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_RX_LIST_PLMT, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_RX_LIST_SELECTOR, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_RX_DATA_INITIATOR, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_RX_DATA_COMP, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_RX_BD_COMP, LM_DISABLE);
-
-	LM_CntrlBlock (pDevice, T3_BLOCK_SEND_BD_SELECTOR, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_SEND_BD_INITIATOR, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_SEND_DATA_INITIATOR, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_DMA_RD, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_SEND_DATA_COMP, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_DMA_COMP, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_SEND_BD_COMP, LM_DISABLE);
-
-	/* Clear TDE bit */
-	pDevice->MacMode &= ~MAC_MODE_ENABLE_TDE;
-	REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
-
-	LM_CntrlBlock (pDevice, T3_BLOCK_MAC_TX_ENGINE, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_HOST_COALESING, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_DMA_WR, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_MBUF_CLUSTER_FREE, LM_DISABLE);
-
-	/* Reset all FTQs */
-	REG_WR (pDevice, Ftq.Reset, 0xffffffff);
-	REG_WR (pDevice, Ftq.Reset, 0x0);
-
-	LM_CntrlBlock (pDevice, T3_BLOCK_MBUF_MANAGER, LM_DISABLE);
-	LM_CntrlBlock (pDevice, T3_BLOCK_MEM_ARBITOR, LM_DISABLE);
-
-	MM_ACQUIRE_INT_LOCK (pDevice);
-
-	/* Abort packets that have already queued to go out. */
-	pPacket = (PLM_PACKET) QQ_PopHead (&pDevice->TxPacketActiveQ.Container);
-	while (pPacket) {
-
-		pPacket->PacketStatus = LM_STATUS_TRANSMIT_ABORTED;
-		pDevice->TxCounters.TxPacketAbortedCnt++;
-
-		atomic_add (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
-
-		QQ_PushTail (&pDevice->TxPacketXmittedQ.Container, pPacket);
-
-		pPacket = (PLM_PACKET)
-		    QQ_PopHead (&pDevice->TxPacketActiveQ.Container);
-	}
-
-	/* Cleanup the receive return rings. */
-	LM_ServiceRxInterrupt (pDevice);
-
-	/* Don't want to indicate rx packets in Ndis miniport shutdown context. */
-	/* Doing so may cause system crash. */
-	if (!pDevice->ShuttingDown) {
-		/* Indicate packets to the protocol. */
-		MM_IndicateTxPackets (pDevice);
-
-		/* Indicate received packets to the protocols. */
-		MM_IndicateRxPackets (pDevice);
-	} else {
-		/* Move the receive packet descriptors in the ReceivedQ to the */
-		/* free queue. */
-		for (;;) {
-			pPacket =
-			    (PLM_PACKET) QQ_PopHead (&pDevice->
-						     RxPacketReceivedQ.
-						     Container);
-			if (pPacket == NULL) {
-				break;
-			}
-			QQ_PushTail (&pDevice->RxPacketFreeQ.Container,
-				     pPacket);
-		}
-	}
-
-	/* Clean up the Std Receive Producer ring. */
-	Idx = pDevice->pStatusBlkVirt->RcvStdConIdx;
-
-	while (Idx != pDevice->RxStdProdIdx) {
-		pPacket = (PLM_PACKET) (MM_UINT_PTR (pDevice->pPacketDescBase) +
-					MM_UINT_PTR (pDevice->pRxStdBdVirt[Idx].
-						     Opaque));
-
-		QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
-
-		Idx = (Idx + 1) & T3_STD_RCV_RCB_ENTRY_COUNT_MASK;
-	}			/* while */
-
-	/* Reinitialize our copy of the indices. */
-	pDevice->RxStdProdIdx = 0;
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	/* Clean up the Jumbo Receive Producer ring. */
-	Idx = pDevice->pStatusBlkVirt->RcvJumboConIdx;
-
-	while (Idx != pDevice->RxJumboProdIdx) {
-		pPacket = (PLM_PACKET) (MM_UINT_PTR (pDevice->pPacketDescBase) +
-					MM_UINT_PTR (pDevice->
-						     pRxJumboBdVirt[Idx].
-						     Opaque));
-
-		QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
-
-		Idx = (Idx + 1) & T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK;
-	}			/* while */
-
-	/* Reinitialize our copy of the indices. */
-	pDevice->RxJumboProdIdx = 0;
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-	MM_RELEASE_INT_LOCK (pDevice);
-
-	/* Initialize the statistis Block */
-	pDevice->pStatusBlkVirt->Status = 0;
-	pDevice->pStatusBlkVirt->RcvStdConIdx = 0;
-	pDevice->pStatusBlkVirt->RcvJumboConIdx = 0;
-	pDevice->pStatusBlkVirt->RcvMiniConIdx = 0;
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_Abort */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    Disable the interrupt and put the transmitter and receiver engines in   */
-/*    an idle state.  Aborts all pending send requests and receive buffers.   */
-/*    Also free all the receive buffers.                                      */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-LM_STATUS LM_Halt (PLM_DEVICE_BLOCK pDevice)
-{
-	PLM_PACKET pPacket;
-	LM_UINT32 EntryCnt;
-
-	LM_Abort (pDevice);
-
-	/* Get the number of entries in the queue. */
-	EntryCnt = QQ_GetEntryCnt (&pDevice->RxPacketFreeQ.Container);
-
-	/* Make sure all the packets have been accounted for. */
-	for (EntryCnt = 0; EntryCnt < pDevice->RxPacketDescCnt; EntryCnt++) {
-		pPacket =
-		    (PLM_PACKET) QQ_PopHead (&pDevice->RxPacketFreeQ.Container);
-		if (pPacket == 0)
-			break;
-
-		MM_FreeRxBuffer (pDevice, pPacket);
-
-		QQ_PushTail (&pDevice->RxPacketFreeQ.Container, pPacket);
-	}
-
-	LM_ResetChip (pDevice);
-
-	/* Restore PCI configuration registers. */
-	MM_WriteConfig32 (pDevice, PCI_CACHE_LINE_SIZE_REG,
-			  pDevice->SavedCacheLineReg);
-	LM_RegWrInd (pDevice, PCI_SUBSYSTEM_VENDOR_ID_REG,
-		     (pDevice->SubsystemId << 16) | pDevice->SubsystemVendorId);
-
-	/* Reprogram the MAC address. */
-	LM_SetMacAddress (pDevice);
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_Halt */
-
-STATIC LM_STATUS LM_ResetChip (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_UINT32 Value32;
-	LM_UINT32 j;
-
-	/* Wait for access to the nvram interface before resetting.  This is */
-	/* a workaround to prevent EEPROM corruption. */
-	if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
-	    T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5701) {
-		/* Request access to the flash interface. */
-		REG_WR (pDevice, Nvram.SwArb, SW_ARB_REQ_SET1);
-
-		for (j = 0; j < 100000; j++) {
-			Value32 = REG_RD (pDevice, Nvram.SwArb);
-			if (Value32 & SW_ARB_GNT1) {
-				break;
-			}
-			MM_Wait (10);
-		}
-	}
-
-	/* Global reset. */
-	REG_WR (pDevice, Grc.MiscCfg, GRC_MISC_CFG_CORE_CLOCK_RESET);
-	MM_Wait (40);
-	MM_Wait (40);
-	MM_Wait (40);
-
-	/* make sure we re-enable indirect accesses */
-	MM_WriteConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG,
-			  pDevice->MiscHostCtrl);
-
-	/* Set MAX PCI retry to zero. */
-	Value32 =
-	    T3_PCI_STATE_PCI_ROM_ENABLE | T3_PCI_STATE_PCI_ROM_RETRY_ENABLE;
-	if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) {
-		if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) {
-			Value32 |= T3_PCI_STATE_RETRY_SAME_DMA;
-		}
-	}
-	MM_WriteConfig32 (pDevice, T3_PCI_STATE_REG, Value32);
-
-	/* Restore PCI command register. */
-	MM_WriteConfig32 (pDevice, PCI_COMMAND_REG,
-			  pDevice->PciCommandStatusWords);
-
-	/* Disable PCI-X relaxed ordering bit. */
-	MM_ReadConfig32 (pDevice, PCIX_CAP_REG, &Value32);
-	Value32 &= ~PCIX_ENABLE_RELAXED_ORDERING;
-	MM_WriteConfig32 (pDevice, PCIX_CAP_REG, Value32);
-
-	/* Enable memory arbiter. */
-	REG_WR (pDevice, MemArbiter.Mode, T3_MEM_ARBITER_MODE_ENABLE);
-
-#ifdef BIG_ENDIAN_PCI		/* This from jfd */
-	Value32 = GRC_MODE_WORD_SWAP_DATA | GRC_MODE_WORD_SWAP_NON_FRAME_DATA;
-#else
-#ifdef BIG_ENDIAN_HOST
-	/* Reconfigure the mode register. */
-	Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA |
-	    GRC_MODE_WORD_SWAP_NON_FRAME_DATA |
-	    GRC_MODE_BYTE_SWAP_DATA | GRC_MODE_WORD_SWAP_DATA;
-#else
-	/* Reconfigure the mode register. */
-	Value32 = GRC_MODE_BYTE_SWAP_NON_FRAME_DATA | GRC_MODE_BYTE_SWAP_DATA;
-#endif
-#endif
-	REG_WR (pDevice, Grc.Mode, Value32);
-
-	/* Prevent PXE from restarting. */
-	MEM_WR_OFFSET (pDevice, 0x0b50, T3_MAGIC_NUM);
-
-	if (pDevice->EnableTbi) {
-		pDevice->MacMode = MAC_MODE_PORT_MODE_TBI;
-		REG_WR (pDevice, MacCtrl.Mode, MAC_MODE_PORT_MODE_TBI);
-	} else {
-		REG_WR (pDevice, MacCtrl.Mode, 0);
-	}
-
-	/* Wait for the firmware to finish initialization. */
-	for (j = 0; j < 100000; j++) {
-		MM_Wait (10);
-
-		Value32 = MEM_RD_OFFSET (pDevice, 0x0b50);
-		if (Value32 == ~T3_MAGIC_NUM) {
-			break;
-		}
-	}
-	return LM_STATUS_SUCCESS;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-__inline static void LM_ServiceTxInterrupt (PLM_DEVICE_BLOCK pDevice)
-{
-	PLM_PACKET pPacket;
-	LM_UINT32 HwConIdx;
-	LM_UINT32 SwConIdx;
-
-	HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx;
-
-	/* Get our copy of the consumer index.  The buffer descriptors */
-	/* that are in between the consumer indices are freed. */
-	SwConIdx = pDevice->SendConIdx;
-
-	/* Move the packets from the TxPacketActiveQ that are sent out to */
-	/* the TxPacketXmittedQ.  Packets that are sent use the */
-	/* descriptors that are between SwConIdx and HwConIdx. */
-	while (SwConIdx != HwConIdx) {
-		/* Get the packet that was sent from the TxPacketActiveQ. */
-		pPacket =
-		    (PLM_PACKET) QQ_PopHead (&pDevice->TxPacketActiveQ.
-					     Container);
-
-		/* Set the return status. */
-		pPacket->PacketStatus = LM_STATUS_SUCCESS;
-
-		/* Put the packet in the TxPacketXmittedQ for indication later. */
-		QQ_PushTail (&pDevice->TxPacketXmittedQ.Container, pPacket);
-
-		/* Move to the next packet's BD. */
-		SwConIdx = (SwConIdx + pPacket->u.Tx.FragCount) &
-		    T3_SEND_RCB_ENTRY_COUNT_MASK;
-
-		/* Update the number of unused BDs. */
-		atomic_add (pPacket->u.Tx.FragCount, &pDevice->SendBdLeft);
-
-		/* Get the new updated HwConIdx. */
-		HwConIdx = pDevice->pStatusBlkVirt->Idx[0].SendConIdx;
-	}			/* while */
-
-	/* Save the new SwConIdx. */
-	pDevice->SendConIdx = SwConIdx;
-
-}				/* LM_ServiceTxInterrupt */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-__inline static void LM_ServiceRxInterrupt (PLM_DEVICE_BLOCK pDevice)
-{
-	PLM_PACKET pPacket;
-	PT3_RCV_BD pRcvBd;
-	LM_UINT32 HwRcvRetProdIdx;
-	LM_UINT32 SwRcvRetConIdx;
-
-	/* Loop thru the receive return rings for received packets. */
-	HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx;
-
-	SwRcvRetConIdx = pDevice->RcvRetConIdx;
-	while (SwRcvRetConIdx != HwRcvRetProdIdx) {
-		pRcvBd = &pDevice->pRcvRetBdVirt[SwRcvRetConIdx];
-
-		/* Get the received packet descriptor. */
-		pPacket = (PLM_PACKET) (MM_UINT_PTR (pDevice->pPacketDescBase) +
-					MM_UINT_PTR (pRcvBd->Opaque));
-
-		/* Check the error flag. */
-		if (pRcvBd->ErrorFlag &&
-		    pRcvBd->ErrorFlag != RCV_BD_ERR_ODD_NIBBLED_RCVD_MII) {
-			pPacket->PacketStatus = LM_STATUS_FAILURE;
-
-			pDevice->RxCounters.RxPacketErrCnt++;
-
-			if (pRcvBd->ErrorFlag & RCV_BD_ERR_BAD_CRC) {
-				pDevice->RxCounters.RxErrCrcCnt++;
-			}
-
-			if (pRcvBd->ErrorFlag & RCV_BD_ERR_COLL_DETECT) {
-				pDevice->RxCounters.RxErrCollCnt++;
-			}
-
-			if (pRcvBd->ErrorFlag & RCV_BD_ERR_LINK_LOST_DURING_PKT) {
-				pDevice->RxCounters.RxErrLinkLostCnt++;
-			}
-
-			if (pRcvBd->ErrorFlag & RCV_BD_ERR_PHY_DECODE_ERR) {
-				pDevice->RxCounters.RxErrPhyDecodeCnt++;
-			}
-
-			if (pRcvBd->ErrorFlag & RCV_BD_ERR_ODD_NIBBLED_RCVD_MII) {
-				pDevice->RxCounters.RxErrOddNibbleCnt++;
-			}
-
-			if (pRcvBd->ErrorFlag & RCV_BD_ERR_MAC_ABORT) {
-				pDevice->RxCounters.RxErrMacAbortCnt++;
-			}
-
-			if (pRcvBd->ErrorFlag & RCV_BD_ERR_LEN_LT_64) {
-				pDevice->RxCounters.RxErrShortPacketCnt++;
-			}
-
-			if (pRcvBd->ErrorFlag & RCV_BD_ERR_TRUNC_NO_RESOURCES) {
-				pDevice->RxCounters.RxErrNoResourceCnt++;
-			}
-
-			if (pRcvBd->ErrorFlag & RCV_BD_ERR_GIANT_FRAME_RCVD) {
-				pDevice->RxCounters.RxErrLargePacketCnt++;
-			}
-		} else {
-			pPacket->PacketStatus = LM_STATUS_SUCCESS;
-			pPacket->PacketSize = pRcvBd->Len - 4;
-
-			pPacket->Flags = pRcvBd->Flags;
-			if (pRcvBd->Flags & RCV_BD_FLAG_VLAN_TAG) {
-				pPacket->VlanTag = pRcvBd->VlanTag;
-			}
-
-			pPacket->u.Rx.TcpUdpChecksum = pRcvBd->TcpUdpCksum;
-		}
-
-		/* Put the packet descriptor containing the received packet */
-		/* buffer in the RxPacketReceivedQ for indication later. */
-		QQ_PushTail (&pDevice->RxPacketReceivedQ.Container, pPacket);
-
-		/* Go to the next buffer descriptor. */
-		SwRcvRetConIdx = (SwRcvRetConIdx + 1) &
-		    T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK;
-
-		/* Get the updated HwRcvRetProdIdx. */
-		HwRcvRetProdIdx = pDevice->pStatusBlkVirt->Idx[0].RcvProdIdx;
-	}			/* while */
-
-	pDevice->RcvRetConIdx = SwRcvRetConIdx;
-
-	/* Update the receive return ring consumer index. */
-	MB_REG_WR (pDevice, Mailbox.RcvRetConIdx[0].Low, SwRcvRetConIdx);
-}				/* LM_ServiceRxInterrupt */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    This is the interrupt event handler routine. It acknowledges all        */
-/*    pending interrupts and process all pending events.                      */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_SUCCESS                                                       */
-/******************************************************************************/
-LM_STATUS LM_ServiceInterrupts (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_UINT32 Value32;
-	int ServicePhyInt = FALSE;
-
-	/* Setup the phy chip whenever the link status changes. */
-	if (pDevice->LinkChngMode == T3_LINK_CHNG_MODE_USE_STATUS_REG) {
-		Value32 = REG_RD (pDevice, MacCtrl.Status);
-		if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) {
-			if (Value32 & MAC_STATUS_MI_INTERRUPT) {
-				ServicePhyInt = TRUE;
-			}
-		} else if (Value32 & MAC_STATUS_LINK_STATE_CHANGED) {
-			ServicePhyInt = TRUE;
-		}
-	} else {
-		if (pDevice->pStatusBlkVirt->
-		    Status & STATUS_BLOCK_LINK_CHANGED_STATUS) {
-			pDevice->pStatusBlkVirt->Status =
-			    STATUS_BLOCK_UPDATED | (pDevice->pStatusBlkVirt->
-						    Status &
-						    ~STATUS_BLOCK_LINK_CHANGED_STATUS);
-			ServicePhyInt = TRUE;
-		}
-	}
-#if INCLUDE_TBI_SUPPORT
-	if (pDevice->IgnoreTbiLinkChange == TRUE) {
-		ServicePhyInt = FALSE;
-	}
-#endif
-	if (ServicePhyInt == TRUE) {
-		LM_SetupPhy (pDevice);
-	}
-
-	/* Service receive and transmit interrupts. */
-	LM_ServiceRxInterrupt (pDevice);
-	LM_ServiceTxInterrupt (pDevice);
-
-	/* No spinlock for this queue since this routine is serialized. */
-	if (!QQ_Empty (&pDevice->RxPacketReceivedQ.Container)) {
-		/* Indicate receive packets. */
-		MM_IndicateRxPackets (pDevice);
-		/*       LM_QueueRxPackets(pDevice); */
-	}
-
-	/* No spinlock for this queue since this routine is serialized. */
-	if (!QQ_Empty (&pDevice->TxPacketXmittedQ.Container)) {
-		MM_IndicateTxPackets (pDevice);
-	}
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_ServiceInterrupts */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_STATUS LM_MulticastAdd (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress)
-{
-	PLM_UINT8 pEntry;
-	LM_UINT32 j;
-
-	pEntry = pDevice->McTable[0];
-	for (j = 0; j < pDevice->McEntryCount; j++) {
-		if (IS_ETH_ADDRESS_EQUAL (pEntry, pMcAddress)) {
-			/* Found a match, increment the instance count. */
-			pEntry[LM_MC_INSTANCE_COUNT_INDEX] += 1;
-
-			return LM_STATUS_SUCCESS;
-		}
-
-		pEntry += LM_MC_ENTRY_SIZE;
-	}
-
-	if (pDevice->McEntryCount >= LM_MAX_MC_TABLE_SIZE) {
-		return LM_STATUS_FAILURE;
-	}
-
-	pEntry = pDevice->McTable[pDevice->McEntryCount];
-
-	COPY_ETH_ADDRESS (pMcAddress, pEntry);
-	pEntry[LM_MC_INSTANCE_COUNT_INDEX] = 1;
-
-	pDevice->McEntryCount++;
-
-	LM_SetReceiveMask (pDevice, pDevice->ReceiveMask | LM_ACCEPT_MULTICAST);
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_MulticastAdd */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_STATUS LM_MulticastDel (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pMcAddress)
-{
-	PLM_UINT8 pEntry;
-	LM_UINT32 j;
-
-	pEntry = pDevice->McTable[0];
-	for (j = 0; j < pDevice->McEntryCount; j++) {
-		if (IS_ETH_ADDRESS_EQUAL (pEntry, pMcAddress)) {
-			/* Found a match, decrement the instance count. */
-			pEntry[LM_MC_INSTANCE_COUNT_INDEX] -= 1;
-
-			/* No more instance left, remove the address from the table. */
-			/* Move the last entry in the table to the delete slot. */
-			if (pEntry[LM_MC_INSTANCE_COUNT_INDEX] == 0 &&
-			    pDevice->McEntryCount > 1) {
-
-				COPY_ETH_ADDRESS (pDevice->
-						  McTable[pDevice->
-							  McEntryCount - 1],
-						  pEntry);
-				pEntry[LM_MC_INSTANCE_COUNT_INDEX] =
-				    pDevice->McTable[pDevice->McEntryCount - 1]
-				    [LM_MC_INSTANCE_COUNT_INDEX];
-			}
-			pDevice->McEntryCount--;
-
-			/* Update the receive mask if the table is empty. */
-			if (pDevice->McEntryCount == 0) {
-				LM_SetReceiveMask (pDevice,
-						   pDevice->
-						   ReceiveMask &
-						   ~LM_ACCEPT_MULTICAST);
-			}
-
-			return LM_STATUS_SUCCESS;
-		}
-
-		pEntry += LM_MC_ENTRY_SIZE;
-	}
-
-	return LM_STATUS_FAILURE;
-}				/* LM_MulticastDel */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_STATUS LM_MulticastClear (PLM_DEVICE_BLOCK pDevice)
-{
-	pDevice->McEntryCount = 0;
-
-	LM_SetReceiveMask (pDevice,
-			   pDevice->ReceiveMask & ~LM_ACCEPT_MULTICAST);
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_MulticastClear */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_STATUS LM_SetMacAddress (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_UINT32 j;
-	PLM_UINT8 pMacAddress = pDevice->NodeAddress;
-
-	for (j = 0; j < 4; j++) {
-		REG_WR (pDevice, MacCtrl.MacAddr[j].High,
-			(pMacAddress[0] << 8) | pMacAddress[1]);
-		REG_WR (pDevice, MacCtrl.MacAddr[j].Low,
-			(pMacAddress[2] << 24) | (pMacAddress[3] << 16) |
-			(pMacAddress[4] << 8) | pMacAddress[5]);
-	}
-
-	return LM_STATUS_SUCCESS;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*    Sets up the default line speed, and duplex modes based on the requested */
-/*    media type.                                                             */
-/*                                                                            */
-/* Return:                                                                    */
-/*    None.                                                                   */
-/******************************************************************************/
-static LM_STATUS
-LM_TranslateRequestedMediaType (LM_REQUESTED_MEDIA_TYPE RequestedMediaType,
-				PLM_MEDIA_TYPE pMediaType,
-				PLM_LINE_SPEED pLineSpeed,
-				PLM_DUPLEX_MODE pDuplexMode)
-{
-	*pMediaType = LM_MEDIA_TYPE_AUTO;
-	*pLineSpeed = LM_LINE_SPEED_UNKNOWN;
-	*pDuplexMode = LM_DUPLEX_MODE_UNKNOWN;
-
-	/* determine media type */
-	switch (RequestedMediaType) {
-	case LM_REQUESTED_MEDIA_TYPE_BNC:
-		*pMediaType = LM_MEDIA_TYPE_BNC;
-		*pLineSpeed = LM_LINE_SPEED_10MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_HALF;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_UTP_AUTO:
-		*pMediaType = LM_MEDIA_TYPE_UTP;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS:
-		*pMediaType = LM_MEDIA_TYPE_UTP;
-		*pLineSpeed = LM_LINE_SPEED_10MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_HALF;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS_FULL_DUPLEX:
-		*pMediaType = LM_MEDIA_TYPE_UTP;
-		*pLineSpeed = LM_LINE_SPEED_10MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_FULL;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS:
-		*pMediaType = LM_MEDIA_TYPE_UTP;
-		*pLineSpeed = LM_LINE_SPEED_100MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_HALF;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_UTP_100MBPS_FULL_DUPLEX:
-		*pMediaType = LM_MEDIA_TYPE_UTP;
-		*pLineSpeed = LM_LINE_SPEED_100MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_FULL;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS:
-		*pMediaType = LM_MEDIA_TYPE_UTP;
-		*pLineSpeed = LM_LINE_SPEED_1000MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_HALF;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_UTP_1000MBPS_FULL_DUPLEX:
-		*pMediaType = LM_MEDIA_TYPE_UTP;
-		*pLineSpeed = LM_LINE_SPEED_1000MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_FULL;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS:
-		*pMediaType = LM_MEDIA_TYPE_FIBER;
-		*pLineSpeed = LM_LINE_SPEED_100MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_HALF;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_FIBER_100MBPS_FULL_DUPLEX:
-		*pMediaType = LM_MEDIA_TYPE_FIBER;
-		*pLineSpeed = LM_LINE_SPEED_100MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_FULL;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS:
-		*pMediaType = LM_MEDIA_TYPE_FIBER;
-		*pLineSpeed = LM_LINE_SPEED_1000MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_HALF;
-		break;
-
-	case LM_REQUESTED_MEDIA_TYPE_FIBER_1000MBPS_FULL_DUPLEX:
-		*pMediaType = LM_MEDIA_TYPE_FIBER;
-		*pLineSpeed = LM_LINE_SPEED_1000MBPS;
-		*pDuplexMode = LM_DUPLEX_MODE_FULL;
-		break;
-
-	default:
-		break;
-	}			/* switch */
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_TranslateRequestedMediaType */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_LINK_ACTIVE                                                   */
-/*    LM_STATUS_LINK_DOWN                                                     */
-/******************************************************************************/
-static LM_STATUS LM_InitBcm540xPhy (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_LINE_SPEED CurrentLineSpeed;
-	LM_DUPLEX_MODE CurrentDuplexMode;
-	LM_STATUS CurrentLinkStatus;
-	LM_UINT32 Value32;
-	LM_UINT32 j;
-
-#if 1				/* jmb: bugfix -- moved here, out of code that sets initial pwr state */
-	LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x2);
-#endif
-	if ((pDevice->PhyId & PHY_ID_MASK) == PHY_BCM5401_PHY_ID) {
-		LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-		LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-
-		if (!pDevice->InitDone) {
-			Value32 = 0;
-		}
-
-		if (!(Value32 & PHY_STATUS_LINK_PASS)) {
-			LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x0c20);
-
-			LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0012);
-			LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1804);
-
-			LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x0013);
-			LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x1204);
-
-			LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
-			LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0132);
-
-			LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x8006);
-			LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0232);
-
-			LM_WritePhy (pDevice, BCM540X_DSP_ADDRESS_REG, 0x201f);
-			LM_WritePhy (pDevice, BCM540X_DSP_RW_PORT, 0x0a20);
-
-			LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-			for (j = 0; j < 1000; j++) {
-				MM_Wait (10);
-
-				LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-				if (Value32 & PHY_STATUS_LINK_PASS) {
-					MM_Wait (40);
-					break;
-				}
-			}
-
-			if ((pDevice->PhyId & PHY_ID_REV_MASK) ==
-			    PHY_BCM5401_B0_REV) {
-				if (!(Value32 & PHY_STATUS_LINK_PASS)
-				    && (pDevice->OldLineSpeed ==
-					LM_LINE_SPEED_1000MBPS)) {
-					LM_WritePhy (pDevice, PHY_CTRL_REG,
-						     PHY_CTRL_PHY_RESET);
-					for (j = 0; j < 100; j++) {
-						MM_Wait (10);
-
-						LM_ReadPhy (pDevice,
-							    PHY_CTRL_REG,
-							    &Value32);
-						if (!
-						    (Value32 &
-						     PHY_CTRL_PHY_RESET)) {
-							MM_Wait (40);
-							break;
-						}
-					}
-
-					LM_WritePhy (pDevice, BCM5401_AUX_CTRL,
-						     0x0c20);
-
-					LM_WritePhy (pDevice,
-						     BCM540X_DSP_ADDRESS_REG,
-						     0x0012);
-					LM_WritePhy (pDevice,
-						     BCM540X_DSP_RW_PORT,
-						     0x1804);
-
-					LM_WritePhy (pDevice,
-						     BCM540X_DSP_ADDRESS_REG,
-						     0x0013);
-					LM_WritePhy (pDevice,
-						     BCM540X_DSP_RW_PORT,
-						     0x1204);
-
-					LM_WritePhy (pDevice,
-						     BCM540X_DSP_ADDRESS_REG,
-						     0x8006);
-					LM_WritePhy (pDevice,
-						     BCM540X_DSP_RW_PORT,
-						     0x0132);
-
-					LM_WritePhy (pDevice,
-						     BCM540X_DSP_ADDRESS_REG,
-						     0x8006);
-					LM_WritePhy (pDevice,
-						     BCM540X_DSP_RW_PORT,
-						     0x0232);
-
-					LM_WritePhy (pDevice,
-						     BCM540X_DSP_ADDRESS_REG,
-						     0x201f);
-					LM_WritePhy (pDevice,
-						     BCM540X_DSP_RW_PORT,
-						     0x0a20);
-				}
-			}
-		}
-	} else if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
-		   pDevice->ChipRevId == T3_CHIP_ID_5701_B0) {
-		/* Bug: 5701 A0, B0 TX CRC workaround. */
-		LM_WritePhy (pDevice, 0x15, 0x0a75);
-		LM_WritePhy (pDevice, 0x1c, 0x8c68);
-		LM_WritePhy (pDevice, 0x1c, 0x8d68);
-		LM_WritePhy (pDevice, 0x1c, 0x8c68);
-	}
-
-	/* Acknowledge interrupts. */
-	LM_ReadPhy (pDevice, BCM540X_INT_STATUS_REG, &Value32);
-	LM_ReadPhy (pDevice, BCM540X_INT_STATUS_REG, &Value32);
-
-	/* Configure the interrupt mask. */
-	if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) {
-		LM_WritePhy (pDevice, BCM540X_INT_MASK_REG,
-			     ~BCM540X_INT_LINK_CHANGE);
-	}
-
-	/* Configure PHY led mode. */
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701 ||
-	    (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700)) {
-		if (pDevice->LedMode == LED_MODE_THREE_LINK) {
-			LM_WritePhy (pDevice, BCM540X_EXT_CTRL_REG,
-				     BCM540X_EXT_CTRL_LINK3_LED_MODE);
-		} else {
-			LM_WritePhy (pDevice, BCM540X_EXT_CTRL_REG, 0);
-		}
-	}
-
-	CurrentLinkStatus = LM_STATUS_LINK_DOWN;
-
-	/* Get current link and duplex mode. */
-	for (j = 0; j < 100; j++) {
-		LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-		LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-
-		if (Value32 & PHY_STATUS_LINK_PASS) {
-			break;
-		}
-		MM_Wait (40);
-	}
-
-	if (Value32 & PHY_STATUS_LINK_PASS) {
-
-		/* Determine the current line and duplex settings. */
-		LM_ReadPhy (pDevice, BCM540X_AUX_STATUS_REG, &Value32);
-		for (j = 0; j < 2000; j++) {
-			MM_Wait (10);
-
-			LM_ReadPhy (pDevice, BCM540X_AUX_STATUS_REG, &Value32);
-			if (Value32) {
-				break;
-			}
-		}
-
-		switch (Value32 & BCM540X_AUX_SPEED_MASK) {
-		case BCM540X_AUX_10BASET_HD:
-			CurrentLineSpeed = LM_LINE_SPEED_10MBPS;
-			CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
-			break;
-
-		case BCM540X_AUX_10BASET_FD:
-			CurrentLineSpeed = LM_LINE_SPEED_10MBPS;
-			CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
-			break;
-
-		case BCM540X_AUX_100BASETX_HD:
-			CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
-			CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
-			break;
-
-		case BCM540X_AUX_100BASETX_FD:
-			CurrentLineSpeed = LM_LINE_SPEED_100MBPS;
-			CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
-			break;
-
-		case BCM540X_AUX_100BASET_HD:
-			CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
-			CurrentDuplexMode = LM_DUPLEX_MODE_HALF;
-			break;
-
-		case BCM540X_AUX_100BASET_FD:
-			CurrentLineSpeed = LM_LINE_SPEED_1000MBPS;
-			CurrentDuplexMode = LM_DUPLEX_MODE_FULL;
-			break;
-
-		default:
-
-			CurrentLineSpeed = LM_LINE_SPEED_UNKNOWN;
-			CurrentDuplexMode = LM_DUPLEX_MODE_UNKNOWN;
-			break;
-		}
-
-		/* Make sure we are in auto-neg mode. */
-		for (j = 0; j < 200; j++) {
-			LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32);
-			if (Value32 && Value32 != 0x7fff) {
-				break;
-			}
-
-			if (Value32 == 0 && pDevice->RequestedMediaType ==
-			    LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS) {
-				break;
-			}
-
-			MM_Wait (10);
-		}
-
-		/* Use the current line settings for "auto" mode. */
-		if (pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO
-		    || pDevice->RequestedMediaType ==
-		    LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) {
-			if (Value32 & PHY_CTRL_AUTO_NEG_ENABLE) {
-				CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
-
-				/* We may be exiting low power mode and the link is in */
-				/* 10mb.  In this case, we need to restart autoneg. */
-				LM_ReadPhy (pDevice, BCM540X_1000BASET_CTRL_REG,
-					    &Value32);
-				pDevice->advertising1000 = Value32;
-				/* 5702FE supports 10/100Mb only. */
-				if (T3_ASIC_REV (pDevice->ChipRevId) !=
-				    T3_ASIC_REV_5703
-				    || pDevice->BondId !=
-				    GRC_MISC_BD_ID_5702FE) {
-					if (!
-					    (Value32 &
-					     (BCM540X_AN_AD_1000BASET_HALF |
-					      BCM540X_AN_AD_1000BASET_FULL))) {
-						CurrentLinkStatus =
-						    LM_STATUS_LINK_SETTING_MISMATCH;
-					}
-				}
-			} else {
-				CurrentLinkStatus =
-				    LM_STATUS_LINK_SETTING_MISMATCH;
-			}
-		} else {
-			/* Force line settings. */
-			/* Use the current setting if it matches the user's requested */
-			/* setting. */
-			LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32);
-			if ((pDevice->LineSpeed == CurrentLineSpeed) &&
-			    (pDevice->DuplexMode == CurrentDuplexMode)) {
-				if ((pDevice->DisableAutoNeg &&
-				     !(Value32 & PHY_CTRL_AUTO_NEG_ENABLE)) ||
-				    (!pDevice->DisableAutoNeg &&
-				     (Value32 & PHY_CTRL_AUTO_NEG_ENABLE))) {
-					CurrentLinkStatus =
-					    LM_STATUS_LINK_ACTIVE;
-				} else {
-					CurrentLinkStatus =
-					    LM_STATUS_LINK_SETTING_MISMATCH;
-				}
-			} else {
-				CurrentLinkStatus =
-				    LM_STATUS_LINK_SETTING_MISMATCH;
-			}
-		}
-
-		/* Save line settings. */
-		pDevice->LineSpeed = CurrentLineSpeed;
-		pDevice->DuplexMode = CurrentDuplexMode;
-		pDevice->MediaType = LM_MEDIA_TYPE_UTP;
-	}
-
-	return CurrentLinkStatus;
-}				/* LM_InitBcm540xPhy */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_STATUS
-LM_SetFlowControl (PLM_DEVICE_BLOCK pDevice,
-		   LM_UINT32 LocalPhyAd, LM_UINT32 RemotePhyAd)
-{
-	LM_FLOW_CONTROL FlowCap;
-
-	/* Resolve flow control. */
-	FlowCap = LM_FLOW_CONTROL_NONE;
-
-	/* See Table 28B-3 of 802.3ab-1999 spec. */
-	if (pDevice->FlowControlCap & LM_FLOW_CONTROL_AUTO_PAUSE) {
-		if (LocalPhyAd & PHY_AN_AD_PAUSE_CAPABLE) {
-			if (LocalPhyAd & PHY_AN_AD_ASYM_PAUSE) {
-				if (RemotePhyAd &
-				    PHY_LINK_PARTNER_PAUSE_CAPABLE) {
-					FlowCap =
-					    LM_FLOW_CONTROL_TRANSMIT_PAUSE |
-					    LM_FLOW_CONTROL_RECEIVE_PAUSE;
-				} else if (RemotePhyAd &
-					   PHY_LINK_PARTNER_ASYM_PAUSE) {
-					FlowCap = LM_FLOW_CONTROL_RECEIVE_PAUSE;
-				}
-			} else {
-				if (RemotePhyAd &
-				    PHY_LINK_PARTNER_PAUSE_CAPABLE) {
-					FlowCap =
-					    LM_FLOW_CONTROL_TRANSMIT_PAUSE |
-					    LM_FLOW_CONTROL_RECEIVE_PAUSE;
-				}
-			}
-		} else if (LocalPhyAd & PHY_AN_AD_ASYM_PAUSE) {
-			if ((RemotePhyAd & PHY_LINK_PARTNER_PAUSE_CAPABLE) &&
-			    (RemotePhyAd & PHY_LINK_PARTNER_ASYM_PAUSE)) {
-				FlowCap = LM_FLOW_CONTROL_TRANSMIT_PAUSE;
-			}
-		}
-	} else {
-		FlowCap = pDevice->FlowControlCap;
-	}
-
-	/* Enable/disable rx PAUSE. */
-	pDevice->RxMode &= ~RX_MODE_ENABLE_FLOW_CONTROL;
-	if (FlowCap & LM_FLOW_CONTROL_RECEIVE_PAUSE &&
-	    (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE ||
-	     pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)) {
-		pDevice->FlowControl |= LM_FLOW_CONTROL_RECEIVE_PAUSE;
-		pDevice->RxMode |= RX_MODE_ENABLE_FLOW_CONTROL;
-
-	}
-	REG_WR (pDevice, MacCtrl.RxMode, pDevice->RxMode);
-
-	/* Enable/disable tx PAUSE. */
-	pDevice->TxMode &= ~TX_MODE_ENABLE_FLOW_CONTROL;
-	if (FlowCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE &&
-	    (pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE ||
-	     pDevice->FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE)) {
-		pDevice->FlowControl |= LM_FLOW_CONTROL_TRANSMIT_PAUSE;
-		pDevice->TxMode |= TX_MODE_ENABLE_FLOW_CONTROL;
-
-	}
-	REG_WR (pDevice, MacCtrl.TxMode, pDevice->TxMode);
-
-	return LM_STATUS_SUCCESS;
-}
-
-#if INCLUDE_TBI_SUPPORT
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-STATIC LM_STATUS LM_InitBcm800xPhy (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_UINT32 Value32;
-	LM_UINT32 j;
-
-	Value32 = REG_RD (pDevice, MacCtrl.Status);
-
-	/* Reset the SERDES during init and when we have link. */
-	if (!pDevice->InitDone || Value32 & MAC_STATUS_PCS_SYNCED) {
-		/* Set PLL lock range. */
-		LM_WritePhy (pDevice, 0x16, 0x8007);
-
-		/* Software reset. */
-		LM_WritePhy (pDevice, 0x00, 0x8000);
-
-		/* Wait for reset to complete. */
-		for (j = 0; j < 500; j++) {
-			MM_Wait (10);
-		}
-
-		/* Config mode; seletct PMA/Ch 1 regs. */
-		LM_WritePhy (pDevice, 0x10, 0x8411);
-
-		/* Enable auto-lock and comdet, select txclk for tx. */
-		LM_WritePhy (pDevice, 0x11, 0x0a10);
-
-		LM_WritePhy (pDevice, 0x18, 0x00a0);
-		LM_WritePhy (pDevice, 0x16, 0x41ff);
-
-		/* Assert and deassert POR. */
-		LM_WritePhy (pDevice, 0x13, 0x0400);
-		MM_Wait (40);
-		LM_WritePhy (pDevice, 0x13, 0x0000);
-
-		LM_WritePhy (pDevice, 0x11, 0x0a50);
-		MM_Wait (40);
-		LM_WritePhy (pDevice, 0x11, 0x0a10);
-
-		/* Delay for signal to stabilize. */
-		for (j = 0; j < 15000; j++) {
-			MM_Wait (10);
-		}
-
-		/* Deselect the channel register so we can read the PHY id later. */
-		LM_WritePhy (pDevice, 0x10, 0x8011);
-	}
-
-	return LM_STATUS_SUCCESS;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-STATIC LM_STATUS LM_SetupFiberPhy (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_STATUS CurrentLinkStatus;
-	AUTONEG_STATUS AnStatus = 0;
-	LM_UINT32 Value32;
-	LM_UINT32 Cnt;
-	LM_UINT32 j, k;
-
-	pDevice->MacMode &= ~(MAC_MODE_HALF_DUPLEX | MAC_MODE_PORT_MODE_MASK);
-
-	/* Initialize the send_config register. */
-	REG_WR (pDevice, MacCtrl.TxAutoNeg, 0);
-
-	/* Enable TBI and full duplex mode. */
-	pDevice->MacMode |= MAC_MODE_PORT_MODE_TBI;
-	REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
-
-	/* Initialize the BCM8002 SERDES PHY. */
-	switch (pDevice->PhyId & PHY_ID_MASK) {
-	case PHY_BCM8002_PHY_ID:
-		LM_InitBcm800xPhy (pDevice);
-		break;
-
-	default:
-		break;
-	}
-
-	/* Enable link change interrupt. */
-	REG_WR (pDevice, MacCtrl.MacEvent,
-		MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN);
-
-	/* Default to link down. */
-	CurrentLinkStatus = LM_STATUS_LINK_DOWN;
-
-	/* Get the link status. */
-	Value32 = REG_RD (pDevice, MacCtrl.Status);
-	if (Value32 & MAC_STATUS_PCS_SYNCED) {
-		if ((pDevice->RequestedMediaType ==
-		     LM_REQUESTED_MEDIA_TYPE_AUTO)
-		    || (pDevice->DisableAutoNeg == FALSE)) {
-			/* auto-negotiation mode. */
-			/* Initialize the autoneg default capaiblities. */
-			AutonegInit (&pDevice->AnInfo);
-
-			/* Set the context pointer to point to the main device structure. */
-			pDevice->AnInfo.pContext = pDevice;
-
-			/* Setup flow control advertisement register. */
-			Value32 = GetPhyAdFlowCntrlSettings (pDevice);
-			if (Value32 & PHY_AN_AD_PAUSE_CAPABLE) {
-				pDevice->AnInfo.mr_adv_sym_pause = 1;
-			} else {
-				pDevice->AnInfo.mr_adv_sym_pause = 0;
-			}
-
-			if (Value32 & PHY_AN_AD_ASYM_PAUSE) {
-				pDevice->AnInfo.mr_adv_asym_pause = 1;
-			} else {
-				pDevice->AnInfo.mr_adv_asym_pause = 0;
-			}
-
-			/* Try to autoneg up to six times. */
-			if (pDevice->IgnoreTbiLinkChange) {
-				Cnt = 1;
-			} else {
-				Cnt = 6;
-			}
-			for (j = 0; j < Cnt; j++) {
-				REG_WR (pDevice, MacCtrl.TxAutoNeg, 0);
-
-				Value32 =
-				    pDevice->MacMode & ~MAC_MODE_PORT_MODE_MASK;
-				REG_WR (pDevice, MacCtrl.Mode, Value32);
-				MM_Wait (20);
-
-				REG_WR (pDevice, MacCtrl.Mode,
-					pDevice->
-					MacMode | MAC_MODE_SEND_CONFIGS);
-
-				MM_Wait (20);
-
-				pDevice->AnInfo.State = AN_STATE_UNKNOWN;
-				pDevice->AnInfo.CurrentTime_us = 0;
-
-				REG_WR (pDevice, Grc.Timer, 0);
-				for (k = 0;
-				     (pDevice->AnInfo.CurrentTime_us < 75000)
-				     && (k < 75000); k++) {
-					AnStatus =
-					    Autoneg8023z (&pDevice->AnInfo);
-
-					if ((AnStatus == AUTONEG_STATUS_DONE) ||
-					    (AnStatus == AUTONEG_STATUS_FAILED))
-					{
-						break;
-					}
-
-					pDevice->AnInfo.CurrentTime_us =
-					    REG_RD (pDevice, Grc.Timer);
-
-				}
-				if ((AnStatus == AUTONEG_STATUS_DONE) ||
-				    (AnStatus == AUTONEG_STATUS_FAILED)) {
-					break;
-				}
-				if (j >= 1) {
-					if (!(REG_RD (pDevice, MacCtrl.Status) &
-					      MAC_STATUS_PCS_SYNCED)) {
-						break;
-					}
-				}
-			}
-
-			/* Stop sending configs. */
-			MM_AnTxIdle (&pDevice->AnInfo);
-
-			/* Resolve flow control settings. */
-			if ((AnStatus == AUTONEG_STATUS_DONE) &&
-			    pDevice->AnInfo.mr_an_complete
-			    && pDevice->AnInfo.mr_link_ok
-			    && pDevice->AnInfo.mr_lp_adv_full_duplex) {
-				LM_UINT32 RemotePhyAd;
-				LM_UINT32 LocalPhyAd;
-
-				LocalPhyAd = 0;
-				if (pDevice->AnInfo.mr_adv_sym_pause) {
-					LocalPhyAd |= PHY_AN_AD_PAUSE_CAPABLE;
-				}
-
-				if (pDevice->AnInfo.mr_adv_asym_pause) {
-					LocalPhyAd |= PHY_AN_AD_ASYM_PAUSE;
-				}
-
-				RemotePhyAd = 0;
-				if (pDevice->AnInfo.mr_lp_adv_sym_pause) {
-					RemotePhyAd |=
-					    PHY_LINK_PARTNER_PAUSE_CAPABLE;
-				}
-
-				if (pDevice->AnInfo.mr_lp_adv_asym_pause) {
-					RemotePhyAd |=
-					    PHY_LINK_PARTNER_ASYM_PAUSE;
-				}
-
-				LM_SetFlowControl (pDevice, LocalPhyAd,
-						   RemotePhyAd);
-
-				CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
-			}
-			for (j = 0; j < 30; j++) {
-				MM_Wait (20);
-				REG_WR (pDevice, MacCtrl.Status,
-					MAC_STATUS_SYNC_CHANGED |
-					MAC_STATUS_CFG_CHANGED);
-				MM_Wait (20);
-				if ((REG_RD (pDevice, MacCtrl.Status) &
-				     (MAC_STATUS_SYNC_CHANGED |
-				      MAC_STATUS_CFG_CHANGED)) == 0)
-					break;
-			}
-			if (pDevice->PollTbiLink) {
-				Value32 = REG_RD (pDevice, MacCtrl.Status);
-				if (Value32 & MAC_STATUS_RECEIVING_CFG) {
-					pDevice->IgnoreTbiLinkChange = TRUE;
-				} else {
-					pDevice->IgnoreTbiLinkChange = FALSE;
-				}
-			}
-			Value32 = REG_RD (pDevice, MacCtrl.Status);
-			if (CurrentLinkStatus == LM_STATUS_LINK_DOWN &&
-			    (Value32 & MAC_STATUS_PCS_SYNCED) &&
-			    ((Value32 & MAC_STATUS_RECEIVING_CFG) == 0)) {
-				CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
-			}
-		} else {
-			/* We are forcing line speed. */
-			pDevice->FlowControlCap &= ~LM_FLOW_CONTROL_AUTO_PAUSE;
-			LM_SetFlowControl (pDevice, 0, 0);
-
-			CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
-			REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode |
-				MAC_MODE_SEND_CONFIGS);
-		}
-	}
-	/* Set the link polarity bit. */
-	pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY;
-	REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
-
-	pDevice->pStatusBlkVirt->Status = STATUS_BLOCK_UPDATED |
-	    (pDevice->pStatusBlkVirt->
-	     Status & ~STATUS_BLOCK_LINK_CHANGED_STATUS);
-
-	for (j = 0; j < 100; j++) {
-		REG_WR (pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
-			MAC_STATUS_CFG_CHANGED);
-		MM_Wait (5);
-		if ((REG_RD (pDevice, MacCtrl.Status) &
-		     (MAC_STATUS_SYNC_CHANGED | MAC_STATUS_CFG_CHANGED)) == 0)
-			break;
-	}
-
-	Value32 = REG_RD (pDevice, MacCtrl.Status);
-	if ((Value32 & MAC_STATUS_PCS_SYNCED) == 0) {
-		CurrentLinkStatus = LM_STATUS_LINK_DOWN;
-		if (pDevice->DisableAutoNeg == FALSE) {
-			REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode |
-				MAC_MODE_SEND_CONFIGS);
-			MM_Wait (1);
-			REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
-		}
-	}
-
-	/* Initialize the current link status. */
-	if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) {
-		pDevice->LineSpeed = LM_LINE_SPEED_1000MBPS;
-		pDevice->DuplexMode = LM_DUPLEX_MODE_FULL;
-		REG_WR (pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED |
-			LED_CTRL_1000MBPS_LED_ON);
-	} else {
-		pDevice->LineSpeed = LM_LINE_SPEED_UNKNOWN;
-		pDevice->DuplexMode = LM_DUPLEX_MODE_UNKNOWN;
-		REG_WR (pDevice, MacCtrl.LedCtrl, LED_CTRL_OVERRIDE_LINK_LED |
-			LED_CTRL_OVERRIDE_TRAFFIC_LED);
-	}
-
-	/* Indicate link status. */
-	if (pDevice->LinkStatus != CurrentLinkStatus) {
-		pDevice->LinkStatus = CurrentLinkStatus;
-		MM_IndicateStatus (pDevice, CurrentLinkStatus);
-	}
-
-	return LM_STATUS_SUCCESS;
-}
-#endif				/* INCLUDE_TBI_SUPPORT */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_STATUS LM_SetupCopperPhy (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_STATUS CurrentLinkStatus;
-	LM_UINT32 Value32;
-
-	/* Assume there is not link first. */
-	CurrentLinkStatus = LM_STATUS_LINK_DOWN;
-
-	/* Disable phy link change attention. */
-	REG_WR (pDevice, MacCtrl.MacEvent, 0);
-
-	/* Clear link change attention. */
-	REG_WR (pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
-		MAC_STATUS_CFG_CHANGED);
-
-	/* Disable auto-polling for the moment. */
-	pDevice->MiMode = 0xc0000;
-	REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
-	MM_Wait (40);
-
-	/* Determine the requested line speed and duplex. */
-	pDevice->OldLineSpeed = pDevice->LineSpeed;
-	LM_TranslateRequestedMediaType (pDevice->RequestedMediaType,
-					&pDevice->MediaType,
-					&pDevice->LineSpeed,
-					&pDevice->DuplexMode);
-
-	/* Initialize the phy chip. */
-	switch (pDevice->PhyId & PHY_ID_MASK) {
-	case PHY_BCM5400_PHY_ID:
-	case PHY_BCM5401_PHY_ID:
-	case PHY_BCM5411_PHY_ID:
-	case PHY_BCM5701_PHY_ID:
-	case PHY_BCM5703_PHY_ID:
-	case PHY_BCM5704_PHY_ID:
-		CurrentLinkStatus = LM_InitBcm540xPhy (pDevice);
-		break;
-
-	default:
-		break;
-	}
-
-	if (CurrentLinkStatus == LM_STATUS_LINK_SETTING_MISMATCH) {
-		CurrentLinkStatus = LM_STATUS_LINK_DOWN;
-	}
-
-	/* Setup flow control. */
-	pDevice->FlowControl = LM_FLOW_CONTROL_NONE;
-	if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) {
-		LM_FLOW_CONTROL FlowCap;	/* Flow control capability. */
-
-		FlowCap = LM_FLOW_CONTROL_NONE;
-
-		if (pDevice->DuplexMode == LM_DUPLEX_MODE_FULL) {
-			if (pDevice->DisableAutoNeg == FALSE ||
-			    pDevice->RequestedMediaType ==
-			    LM_REQUESTED_MEDIA_TYPE_AUTO
-			    || pDevice->RequestedMediaType ==
-			    LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) {
-				LM_UINT32 ExpectedPhyAd;
-				LM_UINT32 LocalPhyAd;
-				LM_UINT32 RemotePhyAd;
-
-				LM_ReadPhy (pDevice, PHY_AN_AD_REG,
-					    &LocalPhyAd);
-				pDevice->advertising = LocalPhyAd;
-				LocalPhyAd &=
-				    (PHY_AN_AD_ASYM_PAUSE |
-				     PHY_AN_AD_PAUSE_CAPABLE);
-
-				ExpectedPhyAd =
-				    GetPhyAdFlowCntrlSettings (pDevice);
-
-				if (LocalPhyAd != ExpectedPhyAd) {
-					CurrentLinkStatus = LM_STATUS_LINK_DOWN;
-				} else {
-					LM_ReadPhy (pDevice,
-						    PHY_LINK_PARTNER_ABILITY_REG,
-						    &RemotePhyAd);
-
-					LM_SetFlowControl (pDevice, LocalPhyAd,
-							   RemotePhyAd);
-				}
-			} else {
-				pDevice->FlowControlCap &=
-				    ~LM_FLOW_CONTROL_AUTO_PAUSE;
-				LM_SetFlowControl (pDevice, 0, 0);
-			}
-		}
-	}
-
-	if (CurrentLinkStatus == LM_STATUS_LINK_DOWN) {
-		LM_ForceAutoNeg (pDevice, pDevice->RequestedMediaType);
-
-		/* If we force line speed, we make get link right away. */
-		LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-		LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-		if (Value32 & PHY_STATUS_LINK_PASS) {
-			CurrentLinkStatus = LM_STATUS_LINK_ACTIVE;
-		}
-	}
-
-	/* GMII interface. */
-	pDevice->MacMode &= ~MAC_MODE_PORT_MODE_MASK;
-	if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) {
-		if (pDevice->LineSpeed == LM_LINE_SPEED_100MBPS ||
-		    pDevice->LineSpeed == LM_LINE_SPEED_10MBPS) {
-			pDevice->MacMode |= MAC_MODE_PORT_MODE_MII;
-		} else {
-			pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
-		}
-	} else {
-		pDevice->MacMode |= MAC_MODE_PORT_MODE_GMII;
-	}
-
-	/* Set the MAC to operate in the appropriate duplex mode. */
-	pDevice->MacMode &= ~MAC_MODE_HALF_DUPLEX;
-	if (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF) {
-		pDevice->MacMode |= MAC_MODE_HALF_DUPLEX;
-	}
-
-	/* Set the link polarity bit. */
-	pDevice->MacMode &= ~MAC_MODE_LINK_POLARITY;
-	if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-		if ((pDevice->LedMode == LED_MODE_LINK10) ||
-		    (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE &&
-		     pDevice->LineSpeed == LM_LINE_SPEED_10MBPS)) {
-			pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
-		}
-	} else {
-		if (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) {
-			pDevice->MacMode |= MAC_MODE_LINK_POLARITY;
-		}
-
-		/* Set LED mode. */
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-		    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-			Value32 = LED_CTRL_PHY_MODE_1;
-		} else {
-			if (pDevice->LedMode == LED_MODE_OUTPUT) {
-				Value32 = LED_CTRL_PHY_MODE_2;
-			} else {
-				Value32 = LED_CTRL_PHY_MODE_1;
-			}
-		}
-		REG_WR (pDevice, MacCtrl.LedCtrl, Value32);
-	}
-
-	REG_WR (pDevice, MacCtrl.Mode, pDevice->MacMode);
-
-	/* Enable auto polling. */
-	if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
-		pDevice->MiMode |= MI_MODE_AUTO_POLLING_ENABLE;
-		REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
-	}
-
-	/* Enable phy link change attention. */
-	if (pDevice->PhyIntMode == T3_PHY_INT_MODE_MI_INTERRUPT) {
-		REG_WR (pDevice, MacCtrl.MacEvent,
-			MAC_EVENT_ENABLE_MI_INTERRUPT);
-	} else {
-		REG_WR (pDevice, MacCtrl.MacEvent,
-			MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN);
-	}
-	if ((T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) &&
-	    (CurrentLinkStatus == LM_STATUS_LINK_ACTIVE) &&
-	    (pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) &&
-	    (((pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE) &&
-	      (pDevice->PciState & T3_PCI_STATE_BUS_SPEED_HIGH)) ||
-	     !(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE))) {
-		MM_Wait (120);
-		REG_WR (pDevice, MacCtrl.Status, MAC_STATUS_SYNC_CHANGED |
-			MAC_STATUS_CFG_CHANGED);
-		MEM_WR_OFFSET (pDevice, T3_FIRMWARE_MAILBOX,
-			       T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE);
-	}
-
-	/* Indicate link status. */
-	if (pDevice->LinkStatus != CurrentLinkStatus) {
-		pDevice->LinkStatus = CurrentLinkStatus;
-		MM_IndicateStatus (pDevice, CurrentLinkStatus);
-	}
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_SetupCopperPhy */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_STATUS LM_SetupPhy (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_STATUS LmStatus;
-	LM_UINT32 Value32;
-
-#if INCLUDE_TBI_SUPPORT
-	if (pDevice->EnableTbi) {
-		LmStatus = LM_SetupFiberPhy (pDevice);
-	} else
-#endif				/* INCLUDE_TBI_SUPPORT */
-	{
-		LmStatus = LM_SetupCopperPhy (pDevice);
-	}
-	if (pDevice->ChipRevId == T3_CHIP_ID_5704_A0) {
-		if (!(pDevice->PciState & T3_PCI_STATE_CONVENTIONAL_PCI_MODE)) {
-			Value32 = REG_RD (pDevice, PciCfg.PciState);
-			REG_WR (pDevice, PciCfg.PciState,
-				Value32 | T3_PCI_STATE_RETRY_SAME_DMA);
-		}
-	}
-	if ((pDevice->LineSpeed == LM_LINE_SPEED_1000MBPS) &&
-	    (pDevice->DuplexMode == LM_DUPLEX_MODE_HALF)) {
-		REG_WR (pDevice, MacCtrl.TxLengths, 0x26ff);
-	} else {
-		REG_WR (pDevice, MacCtrl.TxLengths, 0x2620);
-	}
-
-	return LmStatus;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_VOID
-LM_ReadPhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg, PLM_UINT32 pData32)
-{
-	LM_UINT32 Value32;
-	LM_UINT32 j;
-
-	if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
-		REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode &
-			~MI_MODE_AUTO_POLLING_ENABLE);
-		MM_Wait (40);
-	}
-
-	Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) |
-	    ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) <<
-	     MI_COM_FIRST_PHY_REG_ADDR_BIT) | MI_COM_CMD_READ | MI_COM_START;
-
-	REG_WR (pDevice, MacCtrl.MiCom, Value32);
-
-	for (j = 0; j < 20; j++) {
-		MM_Wait (25);
-
-		Value32 = REG_RD (pDevice, MacCtrl.MiCom);
-
-		if (!(Value32 & MI_COM_BUSY)) {
-			MM_Wait (5);
-			Value32 = REG_RD (pDevice, MacCtrl.MiCom);
-			Value32 &= MI_COM_PHY_DATA_MASK;
-			break;
-		}
-	}
-
-	if (Value32 & MI_COM_BUSY) {
-		Value32 = 0;
-	}
-
-	*pData32 = Value32;
-
-	if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
-		REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
-		MM_Wait (40);
-	}
-}				/* LM_ReadPhy */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_VOID
-LM_WritePhy (PLM_DEVICE_BLOCK pDevice, LM_UINT32 PhyReg, LM_UINT32 Data32)
-{
-	LM_UINT32 Value32;
-	LM_UINT32 j;
-
-	if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
-		REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode &
-			~MI_MODE_AUTO_POLLING_ENABLE);
-		MM_Wait (40);
-	}
-
-	Value32 = (pDevice->PhyAddr << MI_COM_FIRST_PHY_ADDR_BIT) |
-	    ((PhyReg & MI_COM_PHY_REG_ADDR_MASK) <<
-	     MI_COM_FIRST_PHY_REG_ADDR_BIT) | (Data32 & MI_COM_PHY_DATA_MASK) |
-	    MI_COM_CMD_WRITE | MI_COM_START;
-
-	REG_WR (pDevice, MacCtrl.MiCom, Value32);
-
-	for (j = 0; j < 20; j++) {
-		MM_Wait (25);
-
-		Value32 = REG_RD (pDevice, MacCtrl.MiCom);
-
-		if (!(Value32 & MI_COM_BUSY)) {
-			MM_Wait (5);
-			break;
-		}
-	}
-
-	if (pDevice->PhyIntMode == T3_PHY_INT_MODE_AUTO_POLLING) {
-		REG_WR (pDevice, MacCtrl.MiMode, pDevice->MiMode);
-		MM_Wait (40);
-	}
-}				/* LM_WritePhy */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_STATUS LM_SetPowerState (PLM_DEVICE_BLOCK pDevice, LM_POWER_STATE PowerLevel)
-{
-	LM_UINT32 PmeSupport;
-	LM_UINT32 Value32;
-	LM_UINT32 PmCtrl;
-
-	/* make sureindirect accesses are enabled */
-	MM_WriteConfig32 (pDevice, T3_PCI_MISC_HOST_CTRL_REG,
-			  pDevice->MiscHostCtrl);
-
-	/* Clear the PME_ASSERT bit and the power state bits.  Also enable */
-	/* the PME bit. */
-	MM_ReadConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, &PmCtrl);
-
-	PmCtrl |= T3_PM_PME_ASSERTED;
-	PmCtrl &= ~T3_PM_POWER_STATE_MASK;
-
-	/* Set the appropriate power state. */
-	if (PowerLevel == LM_POWER_STATE_D0) {
-
-		/* Bring the card out of low power mode. */
-		PmCtrl |= T3_PM_POWER_STATE_D0;
-		MM_WriteConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl);
-
-		REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl);
-		MM_Wait (40);
-#if 0				/* Bugfix by jmb...can't call WritePhy here because pDevice not fully initialized */
-		LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x02);
-#endif
-
-		return LM_STATUS_SUCCESS;
-	} else if (PowerLevel == LM_POWER_STATE_D1) {
-		PmCtrl |= T3_PM_POWER_STATE_D1;
-	} else if (PowerLevel == LM_POWER_STATE_D2) {
-		PmCtrl |= T3_PM_POWER_STATE_D2;
-	} else if (PowerLevel == LM_POWER_STATE_D3) {
-		PmCtrl |= T3_PM_POWER_STATE_D3;
-	} else {
-		return LM_STATUS_FAILURE;
-	}
-	PmCtrl |= T3_PM_PME_ENABLE;
-
-	/* Mask out all interrupts so LM_SetupPhy won't be called while we are */
-	/* setting new line speed. */
-	Value32 = REG_RD (pDevice, PciCfg.MiscHostCtrl);
-	REG_WR (pDevice, PciCfg.MiscHostCtrl,
-		Value32 | MISC_HOST_CTRL_MASK_PCI_INT);
-
-	if (!pDevice->RestoreOnWakeUp) {
-		pDevice->RestoreOnWakeUp = TRUE;
-		pDevice->WakeUpDisableAutoNeg = pDevice->DisableAutoNeg;
-		pDevice->WakeUpRequestedMediaType = pDevice->RequestedMediaType;
-	}
-
-	/* Force auto-negotiation to 10 line speed. */
-	pDevice->DisableAutoNeg = FALSE;
-	pDevice->RequestedMediaType = LM_REQUESTED_MEDIA_TYPE_UTP_10MBPS;
-	LM_SetupPhy (pDevice);
-
-	/* Put the driver in the initial state, and go through the power down */
-	/* sequence. */
-	LM_Halt (pDevice);
-
-	MM_ReadConfig32 (pDevice, T3_PCI_PM_CAP_REG, &PmeSupport);
-
-	if (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE) {
-
-		/* Enable WOL. */
-		LM_WritePhy (pDevice, BCM5401_AUX_CTRL, 0x5a);
-		MM_Wait (40);
-
-		/* Set LED mode. */
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-		    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-			Value32 = LED_CTRL_PHY_MODE_1;
-		} else {
-			if (pDevice->LedMode == LED_MODE_OUTPUT) {
-				Value32 = LED_CTRL_PHY_MODE_2;
-			} else {
-				Value32 = LED_CTRL_PHY_MODE_1;
-			}
-		}
-
-		Value32 = MAC_MODE_PORT_MODE_MII;
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700) {
-			if (pDevice->LedMode == LED_MODE_LINK10 ||
-			    pDevice->WolSpeed == WOL_SPEED_10MB) {
-				Value32 |= MAC_MODE_LINK_POLARITY;
-			}
-		} else {
-			Value32 |= MAC_MODE_LINK_POLARITY;
-		}
-		REG_WR (pDevice, MacCtrl.Mode, Value32);
-		MM_Wait (40);
-		MM_Wait (40);
-		MM_Wait (40);
-
-		/* Always enable magic packet wake-up if we have vaux. */
-		if ((PmeSupport & T3_PCI_PM_CAP_PME_D3COLD) &&
-		    (pDevice->WakeUpModeCap & LM_WAKE_UP_MODE_MAGIC_PACKET)) {
-			Value32 |= MAC_MODE_DETECT_MAGIC_PACKET_ENABLE;
-		}
-
-		REG_WR (pDevice, MacCtrl.Mode, Value32);
-
-		/* Enable the receiver. */
-		REG_WR (pDevice, MacCtrl.RxMode, RX_MODE_ENABLE);
-	}
-
-	/* Disable tx/rx clocks, and seletect an alternate clock. */
-	if (pDevice->WolSpeed == WOL_SPEED_100MB) {
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-		    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-			Value32 =
-			    T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
-			    T3_PCI_SELECT_ALTERNATE_CLOCK;
-		} else {
-			Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK;
-		}
-		REG_WR (pDevice, PciCfg.ClockCtrl, Value32);
-
-		MM_Wait (40);
-
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-		    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-			Value32 =
-			    T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
-			    T3_PCI_SELECT_ALTERNATE_CLOCK |
-			    T3_PCI_44MHZ_CORE_CLOCK;
-		} else {
-			Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK |
-			    T3_PCI_44MHZ_CORE_CLOCK;
-		}
-
-		REG_WR (pDevice, PciCfg.ClockCtrl, Value32);
-
-		MM_Wait (40);
-
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-		    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-			Value32 =
-			    T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
-			    T3_PCI_44MHZ_CORE_CLOCK;
-		} else {
-			Value32 = T3_PCI_44MHZ_CORE_CLOCK;
-		}
-
-		REG_WR (pDevice, PciCfg.ClockCtrl, Value32);
-	} else {
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-		    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-			Value32 =
-			    T3_PCI_DISABLE_RX_CLOCK | T3_PCI_DISABLE_TX_CLOCK |
-			    T3_PCI_SELECT_ALTERNATE_CLOCK |
-			    T3_PCI_POWER_DOWN_PCI_PLL133;
-		} else {
-			Value32 = T3_PCI_SELECT_ALTERNATE_CLOCK |
-			    T3_PCI_POWER_DOWN_PCI_PLL133;
-		}
-
-		REG_WR (pDevice, PciCfg.ClockCtrl, Value32);
-	}
-
-	MM_Wait (40);
-
-	if (!pDevice->EepromWp
-	    && (pDevice->WakeUpModeCap != LM_WAKE_UP_MODE_NONE)) {
-		/* Switch adapter to auxilliary power. */
-		if (T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5700 ||
-		    T3_ASIC_REV (pDevice->ChipRevId) == T3_ASIC_REV_5701) {
-			/* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */
-			REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
-			MM_Wait (40);
-		} else {
-			/* GPIO0 = 0, GPIO1 = 1, GPIO2 = 1. */
-			REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
-			MM_Wait (40);
-
-			/* GPIO0 = 1, GPIO1 = 1, GPIO2 = 1. */
-			REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2);
-			MM_Wait (40);
-
-			/* GPIO0 = 1, GPIO1 = 1, GPIO2 = 0. */
-			REG_WR (pDevice, Grc.LocalCtrl, pDevice->GrcLocalCtrl |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE0 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE1 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OE2 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0 |
-				GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1);
-			MM_Wait (40);
-		}
-	}
-
-	/* Set the phy to low power mode. */
-	/* Put the the hardware in low power mode. */
-	MM_WriteConfig32 (pDevice, T3_PCI_PM_STATUS_CTRL_REG, PmCtrl);
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_SetPowerState */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-static LM_UINT32 GetPhyAdFlowCntrlSettings (PLM_DEVICE_BLOCK pDevice)
-{
-	LM_UINT32 Value32;
-
-	Value32 = 0;
-
-	/* Auto negotiation flow control only when autonegotiation is enabled. */
-	if (pDevice->DisableAutoNeg == FALSE ||
-	    pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_AUTO ||
-	    pDevice->RequestedMediaType == LM_REQUESTED_MEDIA_TYPE_UTP_AUTO) {
-		/* Please refer to Table 28B-3 of the 802.3ab-1999 spec. */
-		if ((pDevice->FlowControlCap == LM_FLOW_CONTROL_AUTO_PAUSE) ||
-		    ((pDevice->FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE)
-		     && (pDevice->
-			 FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE))) {
-			Value32 |= PHY_AN_AD_PAUSE_CAPABLE;
-		} else if (pDevice->
-			   FlowControlCap & LM_FLOW_CONTROL_TRANSMIT_PAUSE) {
-			Value32 |= PHY_AN_AD_ASYM_PAUSE;
-		} else if (pDevice->
-			   FlowControlCap & LM_FLOW_CONTROL_RECEIVE_PAUSE) {
-			Value32 |=
-			    PHY_AN_AD_PAUSE_CAPABLE | PHY_AN_AD_ASYM_PAUSE;
-		}
-	}
-
-	return Value32;
-}
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/*    LM_STATUS_FAILURE                                                       */
-/*    LM_STATUS_SUCCESS                                                       */
-/*                                                                            */
-/******************************************************************************/
-static LM_STATUS
-LM_ForceAutoNegBcm540xPhy (PLM_DEVICE_BLOCK pDevice,
-			   LM_REQUESTED_MEDIA_TYPE RequestedMediaType)
-{
-	LM_MEDIA_TYPE MediaType;
-	LM_LINE_SPEED LineSpeed;
-	LM_DUPLEX_MODE DuplexMode;
-	LM_UINT32 NewPhyCtrl;
-	LM_UINT32 Value32;
-	LM_UINT32 Cnt;
-
-	/* Get the interface type, line speed, and duplex mode. */
-	LM_TranslateRequestedMediaType (RequestedMediaType, &MediaType,
-					&LineSpeed, &DuplexMode);
-
-	if (pDevice->RestoreOnWakeUp) {
-		LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, 0);
-		pDevice->advertising1000 = 0;
-		Value32 = PHY_AN_AD_10BASET_FULL | PHY_AN_AD_10BASET_HALF;
-		if (pDevice->WolSpeed == WOL_SPEED_100MB) {
-			Value32 |=
-			    PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
-		}
-		Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
-		Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
-		LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
-		pDevice->advertising = Value32;
-	}
-	/* Setup the auto-negotiation advertisement register. */
-	else if (LineSpeed == LM_LINE_SPEED_UNKNOWN) {
-		/* Setup the 10/100 Mbps auto-negotiation advertisement register. */
-		Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD |
-		    PHY_AN_AD_10BASET_HALF | PHY_AN_AD_10BASET_FULL |
-		    PHY_AN_AD_100BASETX_FULL | PHY_AN_AD_100BASETX_HALF;
-		Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
-
-		LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
-		pDevice->advertising = Value32;
-
-		/* Advertise 1000Mbps */
-		Value32 =
-		    BCM540X_AN_AD_1000BASET_HALF | BCM540X_AN_AD_1000BASET_FULL;
-
-#if INCLUDE_5701_AX_FIX
-		/* Bug: workaround for CRC error in gigabit mode when we are in */
-		/* slave mode.  This will force the PHY to operate in */
-		/* master mode. */
-		if (pDevice->ChipRevId == T3_CHIP_ID_5701_A0 ||
-		    pDevice->ChipRevId == T3_CHIP_ID_5701_B0) {
-			Value32 |= BCM540X_CONFIG_AS_MASTER |
-			    BCM540X_ENABLE_CONFIG_AS_MASTER;
-		}
-#endif
-
-		LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, Value32);
-		pDevice->advertising1000 = Value32;
-	} else {
-		if (LineSpeed == LM_LINE_SPEED_1000MBPS) {
-			Value32 = PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
-			Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
-
-			LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
-			pDevice->advertising = Value32;
-
-			if (DuplexMode != LM_DUPLEX_MODE_FULL) {
-				Value32 = BCM540X_AN_AD_1000BASET_HALF;
-			} else {
-				Value32 = BCM540X_AN_AD_1000BASET_FULL;
-			}
-
-			LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG,
-				     Value32);
-			pDevice->advertising1000 = Value32;
-		} else if (LineSpeed == LM_LINE_SPEED_100MBPS) {
-			LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, 0);
-			pDevice->advertising1000 = 0;
-
-			if (DuplexMode != LM_DUPLEX_MODE_FULL) {
-				Value32 = PHY_AN_AD_100BASETX_HALF;
-			} else {
-				Value32 = PHY_AN_AD_100BASETX_FULL;
-			}
-
-			Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
-			Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
-
-			LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
-			pDevice->advertising = Value32;
-		} else if (LineSpeed == LM_LINE_SPEED_10MBPS) {
-			LM_WritePhy (pDevice, BCM540X_1000BASET_CTRL_REG, 0);
-			pDevice->advertising1000 = 0;
-
-			if (DuplexMode != LM_DUPLEX_MODE_FULL) {
-				Value32 = PHY_AN_AD_10BASET_HALF;
-			} else {
-				Value32 = PHY_AN_AD_10BASET_FULL;
-			}
-
-			Value32 |= PHY_AN_AD_PROTOCOL_802_3_CSMA_CD;
-			Value32 |= GetPhyAdFlowCntrlSettings (pDevice);
-
-			LM_WritePhy (pDevice, PHY_AN_AD_REG, Value32);
-			pDevice->advertising = Value32;
-		}
-	}
-
-	/* Force line speed if auto-negotiation is disabled. */
-	if (pDevice->DisableAutoNeg && LineSpeed != LM_LINE_SPEED_UNKNOWN) {
-		/* This code path is executed only when there is link. */
-		pDevice->MediaType = MediaType;
-		pDevice->LineSpeed = LineSpeed;
-		pDevice->DuplexMode = DuplexMode;
-
-		/* Force line seepd. */
-		NewPhyCtrl = 0;
-		switch (LineSpeed) {
-		case LM_LINE_SPEED_10MBPS:
-			NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_10MBPS;
-			break;
-		case LM_LINE_SPEED_100MBPS:
-			NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_100MBPS;
-			break;
-		case LM_LINE_SPEED_1000MBPS:
-			NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS;
-			break;
-		default:
-			NewPhyCtrl |= PHY_CTRL_SPEED_SELECT_1000MBPS;
-			break;
-		}
-
-		if (DuplexMode == LM_DUPLEX_MODE_FULL) {
-			NewPhyCtrl |= PHY_CTRL_FULL_DUPLEX_MODE;
-		}
-
-		/* Don't do anything if the PHY_CTRL is already what we wanted. */
-		LM_ReadPhy (pDevice, PHY_CTRL_REG, &Value32);
-		if (Value32 != NewPhyCtrl) {
-			/* Temporary bring the link down before forcing line speed. */
-			LM_WritePhy (pDevice, PHY_CTRL_REG,
-				     PHY_CTRL_LOOPBACK_MODE);
-
-			/* Wait for link to go down. */
-			for (Cnt = 0; Cnt < 15000; Cnt++) {
-				MM_Wait (10);
-
-				LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-				LM_ReadPhy (pDevice, PHY_STATUS_REG, &Value32);
-
-				if (!(Value32 & PHY_STATUS_LINK_PASS)) {
-					MM_Wait (40);
-					break;
-				}
-			}
-
-			LM_WritePhy (pDevice, PHY_CTRL_REG, NewPhyCtrl);
-			MM_Wait (40);
-		}
-	} else {
-		LM_WritePhy (pDevice, PHY_CTRL_REG, PHY_CTRL_AUTO_NEG_ENABLE |
-			     PHY_CTRL_RESTART_AUTO_NEG);
-	}
-
-	return LM_STATUS_SUCCESS;
-}				/* LM_ForceAutoNegBcm540xPhy */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-static LM_STATUS
-LM_ForceAutoNeg (PLM_DEVICE_BLOCK pDevice,
-		 LM_REQUESTED_MEDIA_TYPE RequestedMediaType)
-{
-	LM_STATUS LmStatus;
-
-	/* Initialize the phy chip. */
-	switch (pDevice->PhyId & PHY_ID_MASK) {
-	case PHY_BCM5400_PHY_ID:
-	case PHY_BCM5401_PHY_ID:
-	case PHY_BCM5411_PHY_ID:
-	case PHY_BCM5701_PHY_ID:
-	case PHY_BCM5703_PHY_ID:
-	case PHY_BCM5704_PHY_ID:
-		LmStatus =
-		    LM_ForceAutoNegBcm540xPhy (pDevice, RequestedMediaType);
-		break;
-
-	default:
-		LmStatus = LM_STATUS_FAILURE;
-		break;
-	}
-
-	return LmStatus;
-}				/* LM_ForceAutoNeg */
-
-/******************************************************************************/
-/* Description:                                                               */
-/*                                                                            */
-/* Return:                                                                    */
-/******************************************************************************/
-LM_STATUS LM_LoadFirmware (PLM_DEVICE_BLOCK pDevice,
-			   PT3_FWIMG_INFO pFwImg,
-			   LM_UINT32 LoadCpu, LM_UINT32 StartCpu)
-{
-	LM_UINT32 i;
-	LM_UINT32 address;
-
-	if (LoadCpu & T3_RX_CPU_ID) {
-		if (LM_HaltCpu (pDevice, T3_RX_CPU_ID) != LM_STATUS_SUCCESS) {
-			return LM_STATUS_FAILURE;
-		}
-
-		/* First of all clear scrach pad memory */
-		for (i = 0; i < T3_RX_CPU_SPAD_SIZE; i += 4) {
-			LM_RegWrInd (pDevice, T3_RX_CPU_SPAD_ADDR + i, 0);
-		}
-
-		/* Copy code first */
-		address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff);
-		for (i = 0; i <= pFwImg->Text.Length; i += 4) {
-			LM_RegWrInd (pDevice, address + i,
-				     ((LM_UINT32 *) pFwImg->Text.Buffer)[i /
-									 4]);
-		}
-
-		address =
-		    T3_RX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff);
-		for (i = 0; i <= pFwImg->ROnlyData.Length; i += 4) {
-			LM_RegWrInd (pDevice, address + i,
-				     ((LM_UINT32 *) pFwImg->ROnlyData.
-				      Buffer)[i / 4]);
-		}
-
-		address = T3_RX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff);
-		for (i = 0; i <= pFwImg->Data.Length; i += 4) {
-			LM_RegWrInd (pDevice, address + i,
-				     ((LM_UINT32 *) pFwImg->Data.Buffer)[i /
-									 4]);
-		}
-	}
-
-	if (LoadCpu & T3_TX_CPU_ID) {
-		if (LM_HaltCpu (pDevice, T3_TX_CPU_ID) != LM_STATUS_SUCCESS) {
-			return LM_STATUS_FAILURE;
-		}
-
-		/* First of all clear scrach pad memory */
-		for (i = 0; i < T3_TX_CPU_SPAD_SIZE; i += 4) {
-			LM_RegWrInd (pDevice, T3_TX_CPU_SPAD_ADDR + i, 0);
-		}
-
-		/* Copy code first */
-		address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Text.Offset & 0xffff);
-		for (i = 0; i <= pFwImg->Text.Length; i += 4) {
-			LM_RegWrInd (pDevice, address + i,
-				     ((LM_UINT32 *) pFwImg->Text.Buffer)[i /
-									 4]);
-		}
-
-		address =
-		    T3_TX_CPU_SPAD_ADDR + (pFwImg->ROnlyData.Offset & 0xffff);
-		for (i = 0; i <= pFwImg->ROnlyData.Length; i += 4) {
-			LM_RegWrInd (pDevice, address + i,
-				     ((LM_UINT32 *) pFwImg->ROnlyData.
-				      Buffer)[i / 4]);
-		}
-
-		address = T3_TX_CPU_SPAD_ADDR + (pFwImg->Data.Offset & 0xffff);
-		for (i = 0; i <= pFwImg->Data.Length; i += 4) {
-			LM_RegWrInd (pDevice, address + i,
-				     ((LM_UINT32 *) pFwImg->Data.Buffer)[i /
-									 4]);
-		}
-	}
-
-	if (StartCpu & T3_RX_CPU_ID) {
-		/* Start Rx CPU */
-		REG_WR (pDevice, rxCpu.reg.state, 0xffffffff);
-		REG_WR (pDevice, rxCpu.reg.PC, pFwImg->StartAddress);
-		for (i = 0; i < 5; i++) {
-			if (pFwImg->StartAddress ==
-			    REG_RD (pDevice, rxCpu.reg.PC))
-				break;
-
-			REG_WR (pDevice, rxCpu.reg.state, 0xffffffff);
-			REG_WR (pDevice, rxCpu.reg.mode, CPU_MODE_HALT);
-			REG_WR (pDevice, rxCpu.reg.PC, pFwImg->StartAddress);
-			MM_Wait (1000);
-		}
-
-		REG_WR (pDevice, rxCpu.reg.state, 0xffffffff);
-		REG_WR (pDevice, rxCpu.reg.mode, 0);
-	}
-
-	if (StartCpu & T3_TX_CPU_ID) {
-		/* Start Tx CPU */
-		REG_WR (pDevice, txCpu.reg.state, 0xffffffff);
-		REG_WR (pDevice, txCpu.reg.PC, pFwImg->StartAddress);
-		for (i = 0; i < 5; i++) {
-			if (pFwImg->StartAddress ==
-			    REG_RD (pDevice, txCpu.reg.PC))
-				break;
-
-			REG_WR (pDevice, txCpu.reg.state, 0xffffffff);
-			REG_WR (pDevice, txCpu.reg.mode, CPU_MODE_HALT);
-			REG_WR (pDevice, txCpu.reg.PC, pFwImg->StartAddress);
-			MM_Wait (1000);
-		}
-
-		REG_WR (pDevice, txCpu.reg.state, 0xffffffff);
-		REG_WR (pDevice, txCpu.reg.mode, 0);
-	}
-
-	return LM_STATUS_SUCCESS;
-}
-
-STATIC LM_STATUS LM_HaltCpu (PLM_DEVICE_BLOCK pDevice, LM_UINT32 cpu_number)
-{
-	LM_UINT32 i;
-
-	if (cpu_number == T3_RX_CPU_ID) {
-		for (i = 0; i < 10000; i++) {
-			REG_WR (pDevice, rxCpu.reg.state, 0xffffffff);
-			REG_WR (pDevice, rxCpu.reg.mode, CPU_MODE_HALT);
-
-			if (REG_RD (pDevice, rxCpu.reg.mode) & CPU_MODE_HALT)
-				break;
-		}
-
-		REG_WR (pDevice, rxCpu.reg.state, 0xffffffff);
-		REG_WR (pDevice, rxCpu.reg.mode, CPU_MODE_HALT);
-		MM_Wait (10);
-	} else {
-		for (i = 0; i < 10000; i++) {
-			REG_WR (pDevice, txCpu.reg.state, 0xffffffff);
-			REG_WR (pDevice, txCpu.reg.mode, CPU_MODE_HALT);
-
-			if (REG_RD (pDevice, txCpu.reg.mode) & CPU_MODE_HALT)
-				break;
-		}
-	}
-
-	return ((i == 10000) ? LM_STATUS_FAILURE : LM_STATUS_SUCCESS);
-}
-
-int LM_BlinkLED (PLM_DEVICE_BLOCK pDevice, LM_UINT32 BlinkDurationSec)
-{
-	LM_UINT32 Oldcfg;
-	int j;
-	int ret = 0;
-
-	if (BlinkDurationSec == 0) {
-		return 0;
-	}
-	if (BlinkDurationSec > 120) {
-		BlinkDurationSec = 120;
-	}
-
-	Oldcfg = REG_RD (pDevice, MacCtrl.LedCtrl);
-	for (j = 0; j < BlinkDurationSec * 2; j++) {
-		if (j % 2) {
-			/* Turn on the LEDs. */
-			REG_WR (pDevice, MacCtrl.LedCtrl,
-				LED_CTRL_OVERRIDE_LINK_LED |
-				LED_CTRL_1000MBPS_LED_ON |
-				LED_CTRL_100MBPS_LED_ON |
-				LED_CTRL_10MBPS_LED_ON |
-				LED_CTRL_OVERRIDE_TRAFFIC_LED |
-				LED_CTRL_BLINK_TRAFFIC_LED |
-				LED_CTRL_TRAFFIC_LED);
-		} else {
-			/* Turn off the LEDs. */
-			REG_WR (pDevice, MacCtrl.LedCtrl,
-				LED_CTRL_OVERRIDE_LINK_LED |
-				LED_CTRL_OVERRIDE_TRAFFIC_LED);
-		}
-
-#ifndef EMBEDDED
-		current->state = TASK_INTERRUPTIBLE;
-		if (schedule_timeout (HZ / 2) != 0) {
-			ret = -EINTR;
-			break;
-		}
-#else
-		udelay (100000);	/* 1s sleep */
-#endif
-	}
-	REG_WR (pDevice, MacCtrl.LedCtrl, Oldcfg);
-	return ret;
-}
-
-int t3_do_dma (PLM_DEVICE_BLOCK pDevice,
-	       LM_PHYSICAL_ADDRESS host_addr_phy, int length, int dma_read)
-{
-	T3_DMA_DESC dma_desc;
-	int i;
-	LM_UINT32 dma_desc_addr;
-	LM_UINT32 value32;
-
-	REG_WR (pDevice, BufMgr.Mode, 0);
-	REG_WR (pDevice, Ftq.Reset, 0);
-
-	dma_desc.host_addr.High = host_addr_phy.High;
-	dma_desc.host_addr.Low = host_addr_phy.Low;
-	dma_desc.nic_mbuf = 0x2100;
-	dma_desc.len = length;
-	dma_desc.flags = 0x00000004;	/* Generate Rx-CPU event */
-
-	if (dma_read) {
-		dma_desc.cqid_sqid = (T3_QID_RX_BD_COMP << 8) |
-		    T3_QID_DMA_HIGH_PRI_READ;
-		REG_WR (pDevice, DmaRead.Mode, DMA_READ_MODE_ENABLE);
-	} else {
-		dma_desc.cqid_sqid = (T3_QID_RX_DATA_COMP << 8) |
-		    T3_QID_DMA_HIGH_PRI_WRITE;
-		REG_WR (pDevice, DmaWrite.Mode, DMA_WRITE_MODE_ENABLE);
-	}
-
-	dma_desc_addr = T3_NIC_DMA_DESC_POOL_ADDR;
-
-	/* Writing this DMA descriptor to DMA memory */
-	for (i = 0; i < sizeof (T3_DMA_DESC); i += 4) {
-		value32 = *((PLM_UINT32) (((PLM_UINT8) & dma_desc) + i));
-		MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG,
-				  dma_desc_addr + i);
-		MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_DATA_REG,
-				  cpu_to_le32 (value32));
-	}
-	MM_WriteConfig32 (pDevice, T3_PCI_MEM_WIN_ADDR_REG, 0);
-
-	if (dma_read)
-		REG_WR (pDevice, Ftq.DmaHighReadFtqFifoEnqueueDequeue,
-			dma_desc_addr);
-	else
-		REG_WR (pDevice, Ftq.DmaHighWriteFtqFifoEnqueueDequeue,
-			dma_desc_addr);
-
-	for (i = 0; i < 40; i++) {
-		if (dma_read)
-			value32 =
-			    REG_RD (pDevice,
-				    Ftq.RcvBdCompFtqFifoEnqueueDequeue);
-		else
-			value32 =
-			    REG_RD (pDevice,
-				    Ftq.RcvDataCompFtqFifoEnqueueDequeue);
-
-		if ((value32 & 0xffff) == dma_desc_addr)
-			break;
-
-		MM_Wait (10);
-	}
-
-	return LM_STATUS_SUCCESS;
-}
-
-STATIC LM_STATUS
-LM_DmaTest (PLM_DEVICE_BLOCK pDevice, PLM_UINT8 pBufferVirt,
-	    LM_PHYSICAL_ADDRESS BufferPhy, LM_UINT32 BufferSize)
-{
-	int j;
-	LM_UINT32 *ptr;
-	int dma_success = 0;
-
-	if (T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5700 &&
-	    T3_ASIC_REV (pDevice->ChipRevId) != T3_ASIC_REV_5701) {
-		return LM_STATUS_SUCCESS;
-	}
-	while (!dma_success) {
-		/* Fill data with incremental patterns */
-		ptr = (LM_UINT32 *) pBufferVirt;
-		for (j = 0; j < BufferSize / 4; j++)
-			*ptr++ = j;
-
-		if (t3_do_dma (pDevice, BufferPhy, BufferSize, 1) ==
-		    LM_STATUS_FAILURE) {
-			return LM_STATUS_FAILURE;
-		}
-
-		MM_Wait (40);
-		ptr = (LM_UINT32 *) pBufferVirt;
-		/* Fill data with zero */
-		for (j = 0; j < BufferSize / 4; j++)
-			*ptr++ = 0;
-
-		if (t3_do_dma (pDevice, BufferPhy, BufferSize, 0) ==
-		    LM_STATUS_FAILURE) {
-			return LM_STATUS_FAILURE;
-		}
-
-		MM_Wait (40);
-		/* Check for data */
-		ptr = (LM_UINT32 *) pBufferVirt;
-		for (j = 0; j < BufferSize / 4; j++) {
-			if (*ptr++ != j) {
-				if ((pDevice->
-				     DmaReadWriteCtrl &
-				     DMA_CTRL_WRITE_BOUNDARY_MASK)
-				    == DMA_CTRL_WRITE_BOUNDARY_DISABLE) {
-					pDevice->DmaReadWriteCtrl =
-					    (pDevice->
-					     DmaReadWriteCtrl &
-					     ~DMA_CTRL_WRITE_BOUNDARY_MASK) |
-					    DMA_CTRL_WRITE_BOUNDARY_16;
-					REG_WR (pDevice,
-						PciCfg.DmaReadWriteCtrl,
-						pDevice->DmaReadWriteCtrl);
-					break;
-				} else {
-					return LM_STATUS_FAILURE;
-				}
-			}
-		}
-		if (j == (BufferSize / 4))
-			dma_success = 1;
-	}
-	return LM_STATUS_SUCCESS;
-}
diff --git a/drivers/net/tigon3.h b/drivers/net/tigon3.h
deleted file mode 100644
index 551107b..0000000
--- a/drivers/net/tigon3.h
+++ /dev/null
@@ -1,3339 +0,0 @@
-
-/******************************************************************************/
-/*                                                                            */
-/* Broadcom BCM5700 Linux Network Driver, Copyright (c) 2000 Broadcom         */
-/* Corporation.                                                               */
-/* All rights reserved.                                                       */
-/*                                                                            */
-/* This program is free software; you can redistribute it and/or modify       */
-/* it under the terms of the GNU General Public License as published by       */
-/* the Free Software Foundation, located in the file LICENSE.                 */
-/*                                                                            */
-/* History:                                                                   */
-/*                                                                            */
-/******************************************************************************/
-
-#ifndef TIGON3_H
-#define TIGON3_H
-
-#include "bcm570x_lm.h"
-#if INCLUDE_TBI_SUPPORT
-#include "bcm570x_autoneg.h"
-#endif
-
-/* io defines */
-#if !defined(BIG_ENDIAN_HOST)
-#define readl(addr) \
-	      (LONGSWAP((*(volatile unsigned int *)(addr))))
-#define writel(b,addr) \
-	      ((*(volatile unsigned int *)(addr)) = (LONGSWAP(b)))
-#else
-#if 0				/* !defined(PPC603) */
-#define readl(addr) (*(volatile unsigned int*)(0xa0000000 + (unsigned long)(addr)))
-#define writel(b,addr) ((*(volatile unsigned int *) ((unsigned long)(addr) + 0xa0000000)) = (b))
-#else
-#if 1
-#define readl(addr) (*(volatile unsigned int*)(addr))
-#define writel(b,addr) ((*(volatile unsigned int *) (addr)) = (b))
-#else
-extern int sprintf (char *buf, const char *f, ...);
-static __inline unsigned int readl (void *addr)
-{
-	char buf[128];
-	unsigned int tmp = (*(volatile unsigned int *)(addr));
-	sprintf (buf, "%s:%s: read 0x%x from 0x%x\n", __FILE__, __LINE__, tmp,
-		 addr, 0, 0);
-	sysSerialPrintString (buf);
-	return tmp;
-}
-static __inline void writel (unsigned int b, unsigned int addr)
-{
-	char buf[128];
-	((*(volatile unsigned int *)(addr)) = (b));
-	sprintf (buf, "%s:%s: write 0x%x to 0x%x\n", __FILE__, __LINE__, b,
-		 addr, 0, 0);
-	sysSerialPrintString (buf);
-}
-#endif
-#endif				/* PPC603 */
-#endif
-
-/******************************************************************************/
-/* Constants. */
-/******************************************************************************/
-
-/* Maxim number of packet descriptors used for sending packets. */
-#define MAX_TX_PACKET_DESC_COUNT            600
-#define DEFAULT_TX_PACKET_DESC_COUNT        2
-
-/* Maximum number of packet descriptors used for receiving packets. */
-#if T3_JUMBO_RCB_ENTRY_COUNT
-#define MAX_RX_PACKET_DESC_COUNT                                            \
-    (T3_STD_RCV_RCB_ENTRY_COUNT + T3_JUMBO_RCV_RCB_ENTRY_COUNT)
-#else
-#define MAX_RX_PACKET_DESC_COUNT            800
-#endif
-#define DEFAULT_RX_PACKET_DESC_COUNT        2
-
-/* Threshhold for double copying small tx packets.  0 will disable double */
-/* copying of small Tx packets. */
-#define DEFAULT_TX_COPY_BUFFER_SIZE         0
-#define MIN_TX_COPY_BUFFER_SIZE             64
-#define MAX_TX_COPY_BUFFER_SIZE             512
-
-/* Cache line. */
-#define COMMON_CACHE_LINE_SIZE              0x20
-#define COMMON_CACHE_LINE_MASK              (COMMON_CACHE_LINE_SIZE-1)
-
-/* Maximum number of fragment we can handle. */
-#ifndef MAX_FRAGMENT_COUNT
-#define MAX_FRAGMENT_COUNT                  32
-#endif
-
-/* B0 bug. */
-#define BCM5700_BX_MIN_FRAG_SIZE            10
-#define BCM5700_BX_MIN_FRAG_BUF_SIZE        16	/* nice aligned size. */
-#define BCM5700_BX_MIN_FRAG_BUF_SIZE_MASK   (BCM5700_BX_MIN_FRAG_BUF_SIZE-1)
-#define BCM5700_BX_TX_COPY_BUF_SIZE         (BCM5700_BX_MIN_FRAG_BUF_SIZE * \
-					    MAX_FRAGMENT_COUNT)
-
-/* MAGIC number. */
-/* #define T3_MAGIC_NUM                        'KevT' */
-#define T3_FIRMWARE_MAILBOX                0x0b50
-#define T3_MAGIC_NUM                       0x4B657654
-#define T3_MAGIC_NUM_DISABLE_DMAW_ON_LINK_CHANGE 0x4861764b
-
-#define T3_NIC_DATA_SIG_ADDR               0x0b54
-#define T3_NIC_DATA_SIG                    0x4b657654
-
-#define T3_NIC_DATA_NIC_CFG_ADDR           0x0b58
-#define T3_NIC_CFG_LED_MODE_UNKNOWN        BIT_NONE
-#define T3_NIC_CFG_LED_MODE_TRIPLE_SPEED   BIT_2
-#define T3_NIC_CFG_LED_MODE_LINK_SPEED     BIT_3
-#define T3_NIC_CFG_LED_MODE_OPEN_DRAIN     BIT_2
-#define T3_NIC_CFG_LED_MODE_OUTPUT         BIT_3
-#define T3_NIC_CFG_LED_MODE_MASK           (BIT_2 | BIT_3)
-#define T3_NIC_CFG_PHY_TYPE_UNKNOWN         BIT_NONE
-#define T3_NIC_CFG_PHY_TYPE_COPPER          BIT_4
-#define T3_NIC_CFG_PHY_TYPE_FIBER           BIT_5
-#define T3_NIC_CFG_PHY_TYPE_MASK            (BIT_4 | BIT_5)
-#define T3_NIC_CFG_ENABLE_WOL               BIT_6
-#define T3_NIC_CFG_ENABLE_ASF               BIT_7
-#define T3_NIC_EEPROM_WP                    BIT_8
-
-#define T3_NIC_DATA_PHY_ID_ADDR            0x0b74
-#define T3_NIC_PHY_ID1_MASK                0xffff0000
-#define T3_NIC_PHY_ID2_MASK                0x0000ffff
-
-#define T3_CMD_MAILBOX                      0x0b78
-#define T3_CMD_NICDRV_ALIVE                 0x01
-#define T3_CMD_NICDRV_PAUSE_FW              0x02
-#define T3_CMD_NICDRV_IPV4ADDR_CHANGE       0x03
-#define T3_CMD_NICDRV_IPV6ADDR_CHANGE       0x04
-#define T3_CMD_5703A0_FIX_DMAFW_DMAR        0x05
-#define T3_CMD_5703A0_FIX_DMAFW_DMAW        0x06
-
-#define T3_CMD_LENGTH_MAILBOX               0x0b7c
-#define T3_CMD_DATA_MAILBOX                 0x0b80
-
-#define T3_ASF_FW_STATUS_MAILBOX            0x0c00
-
-#define T3_DRV_STATE_MAILBOX                0x0c04
-#define T3_DRV_STATE_START                  0x01
-#define T3_DRV_STATE_UNLOAD                 0x02
-#define T3_DRV_STATE_WOL                    0x03
-#define T3_DRV_STATE_SUSPEND                0x04
-
-#define T3_FW_RESET_TYPE_MAILBOX            0x0c08
-
-#define T3_MAC_ADDR_HIGH_MAILBOX            0x0c14
-#define T3_MAC_ADDR_LOW_MAILBOX             0x0c18
-
-/******************************************************************************/
-/* Hardware constants. */
-/******************************************************************************/
-
-/* Number of entries in the send ring:  must be 512. */
-#define T3_SEND_RCB_ENTRY_COUNT             512
-#define T3_SEND_RCB_ENTRY_COUNT_MASK        (T3_SEND_RCB_ENTRY_COUNT-1)
-
-/* Number of send RCBs.  May be 1-16 but for now, only support one. */
-#define T3_MAX_SEND_RCB_COUNT               16
-
-/* Number of entries in the Standard Receive RCB.  Must be 512 entries. */
-#define T3_STD_RCV_RCB_ENTRY_COUNT          512
-#define T3_STD_RCV_RCB_ENTRY_COUNT_MASK     (T3_STD_RCV_RCB_ENTRY_COUNT-1)
-#define DEFAULT_STD_RCV_DESC_COUNT          200	/* Must be < 512. */
-#define MAX_STD_RCV_BUFFER_SIZE             0x600
-
-/* Number of entries in the Mini Receive RCB.  This value can either be */
-/* 0, 1024.  Currently Mini Receive RCB is disabled. */
-#ifndef T3_MINI_RCV_RCB_ENTRY_COUNT
-#define T3_MINI_RCV_RCB_ENTRY_COUNT         0
-#endif				/* T3_MINI_RCV_RCB_ENTRY_COUNT */
-#define T3_MINI_RCV_RCB_ENTRY_COUNT_MASK    (T3_MINI_RCV_RCB_ENTRY_COUNT-1)
-#define MAX_MINI_RCV_BUFFER_SIZE            512
-#define DEFAULT_MINI_RCV_BUFFER_SIZE        64
-#define DEFAULT_MINI_RCV_DESC_COUNT         100	/* Must be < 1024. */
-
-/* Number of entries in the Jumbo Receive RCB.  This value must 256 or 0. */
-/* Currently, Jumbo Receive RCB is disabled. */
-#ifndef T3_JUMBO_RCV_RCB_ENTRY_COUNT
-#define T3_JUMBO_RCV_RCB_ENTRY_COUNT        0
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-#define T3_JUMBO_RCV_RCB_ENTRY_COUNT_MASK   (T3_JUMBO_RCV_RCB_ENTRY_COUNT-1)
-
-#define MAX_JUMBO_RCV_BUFFER_SIZE           (10 * 1024)	/* > 1514 */
-#define DEFAULT_JUMBO_RCV_BUFFER_SIZE       (4 * 1024)	/* > 1514 */
-#define DEFAULT_JUMBO_RCV_DESC_COUNT        128	/* Must be < 256. */
-
-#define MAX_JUMBO_TX_BUFFER_SIZE            (8 * 1024)	/* > 1514 */
-#define DEFAULT_JUMBO_TX_BUFFER_SIZE        (4 * 1024)	/* > 1514 */
-
-/* Number of receive return RCBs.  Maybe 1-16 but for now, only support one. */
-#define T3_MAX_RCV_RETURN_RCB_COUNT         16
-
-/* Number of entries in a Receive Return ring.  This value is either 1024 */
-/* or 2048. */
-#ifndef T3_RCV_RETURN_RCB_ENTRY_COUNT
-#define T3_RCV_RETURN_RCB_ENTRY_COUNT       1024
-#endif				/* T3_RCV_RETURN_RCB_ENTRY_COUNT */
-#define T3_RCV_RETURN_RCB_ENTRY_COUNT_MASK  (T3_RCV_RETURN_RCB_ENTRY_COUNT-1)
-
-/* Default coalescing parameters. */
-#define DEFAULT_RX_COALESCING_TICKS         100
-#define MAX_RX_COALESCING_TICKS             500
-#define DEFAULT_TX_COALESCING_TICKS         400
-#define MAX_TX_COALESCING_TICKS             500
-#define DEFAULT_RX_MAX_COALESCED_FRAMES     10
-#define MAX_RX_MAX_COALESCED_FRAMES         100
-#define ADAPTIVE_LO_RX_MAX_COALESCED_FRAMES    5
-#define ADAPTIVE_HI_RX_MAX_COALESCED_FRAMES    42
-#define ADAPTIVE_LO_RX_COALESCING_TICKS         50
-#define ADAPTIVE_HI_RX_COALESCING_TICKS         300
-#define ADAPTIVE_LO_PKT_THRESH              30000
-#define ADAPTIVE_HI_PKT_THRESH              74000
-#define DEFAULT_TX_MAX_COALESCED_FRAMES     40
-#define ADAPTIVE_LO_TX_MAX_COALESCED_FRAMES    25
-#define ADAPTIVE_HI_TX_MAX_COALESCED_FRAMES    75
-#define MAX_TX_MAX_COALESCED_FRAMES         100
-
-#define DEFAULT_RX_COALESCING_TICKS_DURING_INT          25
-#define DEFAULT_TX_COALESCING_TICKS_DURING_INT          25
-#define DEFAULT_RX_MAX_COALESCED_FRAMES_DURING_INT      5
-#define DEFAULT_TX_MAX_COALESCED_FRAMES_DURING_INT      5
-
-#define BAD_DEFAULT_VALUE                               0xffffffff
-
-#define DEFAULT_STATS_COALESCING_TICKS      1000000
-#define MAX_STATS_COALESCING_TICKS          3600000000U
-
-/* Receive BD Replenish thresholds. */
-#define DEFAULT_RCV_STD_BD_REPLENISH_THRESHOLD      4
-#define DEFAULT_RCV_JUMBO_BD_REPLENISH_THRESHOLD    4
-
-#define SPLIT_MODE_DISABLE                          0
-#define SPLIT_MODE_ENABLE                           1
-
-#define SPLIT_MODE_5704_MAX_REQ                     3
-
-/* Maximum physical fragment size. */
-#define MAX_FRAGMENT_SIZE                   (64 * 1024)
-
-/* Standard view. */
-#define T3_STD_VIEW_SIZE                    (64 * 1024)
-#define T3_FLAT_VIEW_SIZE                   (32 * 1024 * 1024)
-
-/* Buffer descriptor base address on the NIC's memory. */
-
-#define T3_NIC_SND_BUFFER_DESC_ADDR         0x4000
-#define T3_NIC_STD_RCV_BUFFER_DESC_ADDR     0x6000
-#define T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR   0x7000
-
-#define T3_NIC_STD_RCV_BUFFER_DESC_ADDR_EXT_MEM     0xc000
-#define T3_NIC_JUMBO_RCV_BUFFER_DESC_ADDR_EXT_MEM   0xd000
-#define T3_NIC_MINI_RCV_BUFFER_DESC_ADDR_EXT_MEM    0xe000
-
-#define T3_NIC_SND_BUFFER_DESC_SIZE         (T3_SEND_RCB_ENTRY_COUNT * \
-					    sizeof(T3_SND_BD) / 4)
-
-#define T3_NIC_STD_RCV_BUFFER_DESC_SIZE     (T3_STD_RCV_RCB_ENTRY_COUNT * \
-					    sizeof(T3_RCV_BD) / 4)
-
-#define T3_NIC_JUMBO_RCV_BUFFER_DESC_SIZE   (T3_JUMBO_RCV_RCB_ENTRY_COUNT * \
-					    sizeof(T3_EXT_RCV_BD) / 4)
-
-/* MBUF pool. */
-#define T3_NIC_MBUF_POOL_ADDR               0x8000
-/* #define T3_NIC_MBUF_POOL_SIZE               0x18000 */
-#define T3_NIC_MBUF_POOL_SIZE96             0x18000
-#define T3_NIC_MBUF_POOL_SIZE64             0x10000
-
-#define T3_NIC_MBUF_POOL_ADDR_EXT_MEM       0x20000
-
-/* DMA descriptor pool */
-#define T3_NIC_DMA_DESC_POOL_ADDR           0x2000
-#define T3_NIC_DMA_DESC_POOL_SIZE           0x2000	/* 8KB. */
-
-#define T3_DEF_DMA_MBUF_LOW_WMARK           0x40
-#define T3_DEF_RX_MAC_MBUF_LOW_WMARK        0x20
-#define T3_DEF_MBUF_HIGH_WMARK              0x60
-
-#define T3_DEF_DMA_MBUF_LOW_WMARK_JUMBO     304
-#define T3_DEF_RX_MAC_MBUF_LOW_WMARK_JUMBO  152
-#define T3_DEF_MBUF_HIGH_WMARK_JUMBO        380
-
-#define T3_DEF_DMA_DESC_LOW_WMARK           5
-#define T3_DEF_DMA_DESC_HIGH_WMARK          10
-
-/* Maximum size of giant TCP packet can be sent */
-#define T3_TCP_SEG_MAX_OFFLOAD_SIZE         64*1000
-#define T3_TCP_SEG_MIN_NUM_SEG              20
-
-#define T3_RX_CPU_ID    0x1
-#define T3_TX_CPU_ID    0x2
-#define T3_RX_CPU_SPAD_ADDR  0x30000
-#define T3_RX_CPU_SPAD_SIZE  0x4000
-#define T3_TX_CPU_SPAD_ADDR  0x34000
-#define T3_TX_CPU_SPAD_SIZE  0x4000
-
-typedef struct T3_DIR_ENTRY {
-	PLM_UINT8 Buffer;
-	LM_UINT32 Offset;
-	LM_UINT32 Length;
-} T3_DIR_ENTRY, *PT3_DIR_ENTRY;
-
-typedef struct T3_FWIMG_INFO {
-	LM_UINT32 StartAddress;
-	T3_DIR_ENTRY Text;
-	T3_DIR_ENTRY ROnlyData;
-	T3_DIR_ENTRY Data;
-	T3_DIR_ENTRY Sbss;
-	T3_DIR_ENTRY Bss;
-} T3_FWIMG_INFO, *PT3_FWIMG_INFO;
-
-/******************************************************************************/
-/* Tigon3 PCI Registers. */
-/******************************************************************************/
-#define T3_PCI_ID_BCM5700                   0x164414e4
-#define T3_PCI_ID_BCM5701                   0x164514e4
-#define T3_PCI_ID_BCM5702                   0x164614e4
-#define T3_PCI_ID_BCM5702x                  0x16A614e4
-#define T3_PCI_ID_BCM5703                   0x164714e4
-#define T3_PCI_ID_BCM5703x                  0x16A714e4
-#define T3_PCI_ID_BCM5702FE                 0x164D14e4
-#define T3_PCI_ID_BCM5704                   0x164814e4
-
-#define T3_PCI_VENDOR_ID                    (T3_PCI_ID & 0xffff)
-#define T3_PCI_DEVICE_ID                    (T3_PCI_ID >> 16)
-
-#define T3_PCI_MISC_HOST_CTRL_REG           0x68
-
-/* The most significant 16bit of register 0x68. */
-/* ChipId:4, ChipRev:4, MetalRev:8 */
-#define T3_CHIP_ID_5700_A0                  0x7000
-#define T3_CHIP_ID_5700_A1                  0x7001
-#define T3_CHIP_ID_5700_B0                  0x7100
-#define T3_CHIP_ID_5700_B1                  0x7101
-#define T3_CHIP_ID_5700_C0                  0x7200
-
-#define T3_CHIP_ID_5701_A0                  0x0000
-#define T3_CHIP_ID_5701_B0                  0x0100
-#define T3_CHIP_ID_5701_B2                  0x0102
-#define T3_CHIP_ID_5701_B5                  0x0105
-
-#define T3_CHIP_ID_5703_A0                  0x1000
-#define T3_CHIP_ID_5703_A1                  0x1001
-#define T3_CHIP_ID_5703_A2                  0x1002
-
-#define T3_CHIP_ID_5704_A0                  0x2000
-
-/* Chip Id. */
-#define T3_ASIC_REV(_ChipRevId)             ((_ChipRevId) >> 12)
-#define T3_ASIC_REV_5700                    0x07
-#define T3_ASIC_REV_5701                    0x00
-#define T3_ASIC_REV_5703                    0x01
-#define T3_ASIC_REV_5704                    0x02
-
-/* Chip id and revision. */
-#define T3_CHIP_REV(_ChipRevId)             ((_ChipRevId) >> 8)
-#define T3_CHIP_REV_5700_AX                 0x70
-#define T3_CHIP_REV_5700_BX                 0x71
-#define T3_CHIP_REV_5700_CX                 0x72
-#define T3_CHIP_REV_5701_AX                 0x00
-
-/* Metal revision. */
-#define T3_METAL_REV(_ChipRevId)            ((_ChipRevId) & 0xff)
-#define T3_METAL_REV_A0                     0x00
-#define T3_METAL_REV_A1                     0x01
-#define T3_METAL_REV_B0                     0x00
-#define T3_METAL_REV_B1                     0x01
-#define T3_METAL_REV_B2                     0x02
-
-#define T3_PCI_REG_CLOCK_CTRL               0x74
-
-#define T3_PCI_DISABLE_RX_CLOCK             BIT_10
-#define T3_PCI_DISABLE_TX_CLOCK             BIT_11
-#define T3_PCI_SELECT_ALTERNATE_CLOCK       BIT_12
-#define T3_PCI_POWER_DOWN_PCI_PLL133        BIT_15
-#define T3_PCI_44MHZ_CORE_CLOCK             BIT_18
-
-#define T3_PCI_REG_ADDR_REG                 0x78
-#define T3_PCI_REG_DATA_REG                 0x80
-
-#define T3_PCI_MEM_WIN_ADDR_REG             0x7c
-#define T3_PCI_MEM_WIN_DATA_REG             0x84
-
-#define T3_PCI_PM_CAP_REG                   0x48
-
-#define T3_PCI_PM_CAP_PME_D3COLD            BIT_31
-#define T3_PCI_PM_CAP_PME_D3HOT             BIT_30
-
-#define T3_PCI_PM_STATUS_CTRL_REG           0x4c
-
-#define T3_PM_POWER_STATE_MASK              (BIT_0 | BIT_1)
-#define T3_PM_POWER_STATE_D0                BIT_NONE
-#define T3_PM_POWER_STATE_D1                BIT_0
-#define T3_PM_POWER_STATE_D2                BIT_1
-#define T3_PM_POWER_STATE_D3                (BIT_0 | BIT_1)
-
-#define T3_PM_PME_ENABLE                    BIT_8
-#define T3_PM_PME_ASSERTED                  BIT_15
-
-/* PCI state register. */
-#define T3_PCI_STATE_REG                    0x70
-
-#define T3_PCI_STATE_FORCE_RESET            BIT_0
-#define T3_PCI_STATE_INT_NOT_ACTIVE         BIT_1
-#define T3_PCI_STATE_CONVENTIONAL_PCI_MODE  BIT_2
-#define T3_PCI_STATE_BUS_SPEED_HIGH         BIT_3
-#define T3_PCI_STATE_32BIT_PCI_BUS          BIT_4
-
-/* Broadcom subsystem/subvendor IDs. */
-#define T3_SVID_BROADCOM                            0x14e4
-
-#define T3_SSID_BROADCOM_BCM95700A6                 0x1644
-#define T3_SSID_BROADCOM_BCM95701A5                 0x0001
-#define T3_SSID_BROADCOM_BCM95700T6                 0x0002	/* BCM8002 */
-#define T3_SSID_BROADCOM_BCM95700A9                 0x0003	/* Agilent */
-#define T3_SSID_BROADCOM_BCM95701T1                 0x0005
-#define T3_SSID_BROADCOM_BCM95701T8                 0x0006
-#define T3_SSID_BROADCOM_BCM95701A7                 0x0007	/* Agilent */
-#define T3_SSID_BROADCOM_BCM95701A10                0x0008
-#define T3_SSID_BROADCOM_BCM95701A12                0x8008
-#define T3_SSID_BROADCOM_BCM95703Ax1                0x0009
-#define T3_SSID_BROADCOM_BCM95703Ax2                0x8009
-
-/* 3COM subsystem/subvendor IDs. */
-#define T3_SVID_3COM                                0x10b7
-
-#define T3_SSID_3COM_3C996T                         0x1000
-#define T3_SSID_3COM_3C996BT                        0x1006
-#define T3_SSID_3COM_3C996CT                        0x1002
-#define T3_SSID_3COM_3C997T                         0x1003
-#define T3_SSID_3COM_3C1000T                        0x1007
-#define T3_SSID_3COM_3C940BR01                      0x1008
-
-/* Fiber boards. */
-#define T3_SSID_3COM_3C996SX                        0x1004
-#define T3_SSID_3COM_3C997SX                        0x1005
-
-/* Dell subsystem/subvendor IDs. */
-
-#define T3_SVID_DELL                                0x1028
-
-#define T3_SSID_DELL_VIPER                          0x00d1
-#define T3_SSID_DELL_JAGUAR                         0x0106
-#define T3_SSID_DELL_MERLOT                         0x0109
-#define T3_SSID_DELL_SLIM_MERLOT                    0x010a
-
-/* Compaq subsystem/subvendor IDs */
-
-#define T3_SVID_COMPAQ                              0x0e11
-
-#define T3_SSID_COMPAQ_BANSHEE                      0x007c
-#define T3_SSID_COMPAQ_BANSHEE_2                    0x009a
-#define T3_SSID_COMPAQ_CHANGELING                   0x007d
-#define T3_SSID_COMPAQ_NC7780                       0x0085
-#define T3_SSID_COMPAQ_NC7780_2                     0x0099
-
-/******************************************************************************/
-/* MII registers. */
-/******************************************************************************/
-
-/* Control register. */
-#define PHY_CTRL_REG                                0x00
-
-#define PHY_CTRL_SPEED_MASK                         (BIT_6 | BIT_13)
-#define PHY_CTRL_SPEED_SELECT_10MBPS                BIT_NONE
-#define PHY_CTRL_SPEED_SELECT_100MBPS               BIT_13
-#define PHY_CTRL_SPEED_SELECT_1000MBPS              BIT_6
-#define PHY_CTRL_COLLISION_TEST_ENABLE              BIT_7
-#define PHY_CTRL_FULL_DUPLEX_MODE                   BIT_8
-#define PHY_CTRL_RESTART_AUTO_NEG                   BIT_9
-#define PHY_CTRL_ISOLATE_PHY                        BIT_10
-#define PHY_CTRL_LOWER_POWER_MODE                   BIT_11
-#define PHY_CTRL_AUTO_NEG_ENABLE                    BIT_12
-#define PHY_CTRL_LOOPBACK_MODE                      BIT_14
-#define PHY_CTRL_PHY_RESET                          BIT_15
-
-/* Status register. */
-#define PHY_STATUS_REG                              0x01
-
-#define PHY_STATUS_LINK_PASS                        BIT_2
-#define PHY_STATUS_AUTO_NEG_COMPLETE                BIT_5
-
-/* Phy Id registers. */
-#define PHY_ID1_REG                                 0x02
-#define PHY_ID1_OUI_MASK                            0xffff
-
-#define PHY_ID2_REG                                 0x03
-#define PHY_ID2_REV_MASK                            0x000f
-#define PHY_ID2_MODEL_MASK                          0x03f0
-#define PHY_ID2_OUI_MASK                            0xfc00
-
-/* Auto-negotiation advertisement register. */
-#define PHY_AN_AD_REG                               0x04
-
-#define PHY_AN_AD_ASYM_PAUSE                        BIT_11
-#define PHY_AN_AD_PAUSE_CAPABLE                     BIT_10
-#define PHY_AN_AD_10BASET_HALF                      BIT_5
-#define PHY_AN_AD_10BASET_FULL                      BIT_6
-#define PHY_AN_AD_100BASETX_HALF                    BIT_7
-#define PHY_AN_AD_100BASETX_FULL                    BIT_8
-#define PHY_AN_AD_PROTOCOL_802_3_CSMA_CD            0x01
-
-/* Auto-negotiation Link Partner Ability register. */
-#define PHY_LINK_PARTNER_ABILITY_REG                0x05
-
-#define PHY_LINK_PARTNER_ASYM_PAUSE                 BIT_11
-#define PHY_LINK_PARTNER_PAUSE_CAPABLE              BIT_10
-
-/* Auto-negotiation expansion register. */
-#define PHY_AN_EXPANSION_REG                        0x06
-
-/******************************************************************************/
-/* BCM5400 and BCM5401 phy info. */
-/******************************************************************************/
-
-#define PHY_DEVICE_ID           1
-
-/* OUI: bit 31-10;   Model#: bit 9-4;   Rev# bit 3-0. */
-#define PHY_UNKNOWN_PHY                             0x00000000
-#define PHY_BCM5400_PHY_ID                          0x60008040
-#define PHY_BCM5401_PHY_ID                          0x60008050
-#define PHY_BCM5411_PHY_ID                          0x60008070
-#define PHY_BCM5701_PHY_ID                          0x60008110
-#define PHY_BCM5703_PHY_ID                          0x60008160
-#define PHY_BCM5704_PHY_ID                          0x60008190
-#define PHY_BCM8002_PHY_ID                          0x60010140
-
-#define PHY_BCM5401_B0_REV                          0x1
-#define PHY_BCM5401_B2_REV                          0x3
-#define PHY_BCM5401_C0_REV                          0x6
-
-#define PHY_ID_OUI_MASK                             0xfffffc00
-#define PHY_ID_MODEL_MASK                           0x000003f0
-#define PHY_ID_REV_MASK                             0x0000000f
-#define PHY_ID_MASK                                 (PHY_ID_OUI_MASK |      \
-						    PHY_ID_MODEL_MASK)
-
-#define UNKNOWN_PHY_ID(x)   ((((x) & PHY_ID_MASK) != PHY_BCM5400_PHY_ID) && \
-			    (((x) & PHY_ID_MASK) != PHY_BCM5401_PHY_ID) && \
-			    (((x) & PHY_ID_MASK) != PHY_BCM5411_PHY_ID) && \
-			    (((x) & PHY_ID_MASK) != PHY_BCM5701_PHY_ID) && \
-			    (((x) & PHY_ID_MASK) != PHY_BCM5703_PHY_ID) && \
-			    (((x) & PHY_ID_MASK) != PHY_BCM5704_PHY_ID) && \
-			    (((x) & PHY_ID_MASK) != PHY_BCM8002_PHY_ID))
-
-/* 1000Base-T control register. */
-#define BCM540X_1000BASET_CTRL_REG                  0x09
-
-#define BCM540X_AN_AD_1000BASET_HALF                BIT_8
-#define BCM540X_AN_AD_1000BASET_FULL                BIT_9
-#define BCM540X_CONFIG_AS_MASTER                    BIT_11
-#define BCM540X_ENABLE_CONFIG_AS_MASTER             BIT_12
-
-/* Extended control register. */
-#define BCM540X_EXT_CTRL_REG                        0x10
-
-#define BCM540X_EXT_CTRL_LINK3_LED_MODE             BIT_1
-#define BCM540X_EXT_CTRL_TBI                        BIT_15
-
-/* PHY extended status register. */
-#define BCM540X_EXT_STATUS_REG                      0x11
-
-#define BCM540X_EXT_STATUS_LINK_PASS                BIT_8
-
-/* DSP Coefficient Read/Write Port. */
-#define BCM540X_DSP_RW_PORT                         0x15
-
-/* DSP Coeficient Address Register. */
-#define BCM540X_DSP_ADDRESS_REG                     0x17
-
-#define BCM540X_DSP_TAP_NUMBER_MASK                 0x00
-#define BCM540X_DSP_AGC_A                           0x00
-#define BCM540X_DSP_AGC_B                           0x01
-#define BCM540X_DSP_MSE_PAIR_STATUS                 0x02
-#define BCM540X_DSP_SOFT_DECISION                   0x03
-#define BCM540X_DSP_PHASE_REG                       0x04
-#define BCM540X_DSP_SKEW                            0x05
-#define BCM540X_DSP_POWER_SAVER_UPPER_BOUND         0x06
-#define BCM540X_DSP_POWER_SAVER_LOWER_BOUND         0x07
-#define BCM540X_DSP_LAST_ECHO                       0x08
-#define BCM540X_DSP_FREQUENCY                       0x09
-#define BCM540X_DSP_PLL_BANDWIDTH                   0x0a
-#define BCM540X_DSP_PLL_PHASE_OFFSET                0x0b
-
-#define BCM540X_DSP_FILTER_DCOFFSET                 (BIT_10 | BIT_11)
-#define BCM540X_DSP_FILTER_FEXT3                    (BIT_8 | BIT_9 | BIT_11)
-#define BCM540X_DSP_FILTER_FEXT2                    (BIT_9 | BIT_11)
-#define BCM540X_DSP_FILTER_FEXT1                    (BIT_8 | BIT_11)
-#define BCM540X_DSP_FILTER_FEXT0                    BIT_11
-#define BCM540X_DSP_FILTER_NEXT3                    (BIT_8 | BIT_9 | BIT_10)
-#define BCM540X_DSP_FILTER_NEXT2                    (BIT_9 | BIT_10)
-#define BCM540X_DSP_FILTER_NEXT1                    (BIT_8 | BIT_10)
-#define BCM540X_DSP_FILTER_NEXT0                    BIT_10
-#define BCM540X_DSP_FILTER_ECHO                     (BIT_8 | BIT_9)
-#define BCM540X_DSP_FILTER_DFE                      BIT_9
-#define BCM540X_DSP_FILTER_FFE                      BIT_8
-
-#define BCM540X_DSP_CONTROL_ALL_FILTERS             BIT_12
-
-#define BCM540X_DSP_SEL_CH_0                        BIT_NONE
-#define BCM540X_DSP_SEL_CH_1                        BIT_13
-#define BCM540X_DSP_SEL_CH_2                        BIT_14
-#define BCM540X_DSP_SEL_CH_3                        (BIT_13 | BIT_14)
-
-#define BCM540X_CONTROL_ALL_CHANNELS                BIT_15
-
-/* Auxilliary Control Register (Shadow Register) */
-#define BCM5401_AUX_CTRL                            0x18
-
-#define BCM5401_SHADOW_SEL_MASK                     0x7
-#define BCM5401_SHADOW_SEL_NORMAL                   0x00
-#define BCM5401_SHADOW_SEL_10BASET                  0x01
-#define BCM5401_SHADOW_SEL_POWER_CONTROL            0x02
-#define BCM5401_SHADOW_SEL_IP_PHONE                 0x03
-#define BCM5401_SHADOW_SEL_MISC_TEST1               0x04
-#define BCM5401_SHADOW_SEL_MISC_TEST2               0x05
-#define BCM5401_SHADOW_SEL_IP_PHONE_SEED            0x06
-
-/* Shadow register selector == '000' */
-#define BCM5401_SHDW_NORMAL_DIAG_MODE               BIT_3
-#define BCM5401_SHDW_NORMAL_DISABLE_MBP             BIT_4
-#define BCM5401_SHDW_NORMAL_DISABLE_LOW_PWR         BIT_5
-#define BCM5401_SHDW_NORMAL_DISABLE_INV_PRF         BIT_6
-#define BCM5401_SHDW_NORMAL_DISABLE_PRF             BIT_7
-#define BCM5401_SHDW_NORMAL_RX_SLICING_NORMAL       BIT_NONE
-#define BCM5401_SHDW_NORMAL_RX_SLICING_4D           BIT_8
-#define BCM5401_SHDW_NORMAL_RX_SLICING_3LVL_1D      BIT_9
-#define BCM5401_SHDW_NORMAL_RX_SLICING_5LVL_1D      (BIT_8 | BIT_9)
-#define BCM5401_SHDW_NORMAL_TX_6DB_CODING           BIT_10
-#define BCM5401_SHDW_NORMAL_ENABLE_SM_DSP_CLOCK     BIT_11
-#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_4NS       BIT_NONE
-#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_5NS       BIT_12
-#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_3NS       BIT_13
-#define BCM5401_SHDW_NORMAL_EDGERATE_CTRL_0NS       (BIT_12 | BIT_13)
-#define BCM5401_SHDW_NORMAL_EXT_PACKET_LENGTH       BIT_14
-#define BCM5401_SHDW_NORMAL_EXTERNAL_LOOPBACK       BIT_15
-
-/* Auxilliary status summary. */
-#define BCM540X_AUX_STATUS_REG                      0x19
-
-#define BCM540X_AUX_LINK_PASS                       BIT_2
-#define BCM540X_AUX_SPEED_MASK                      (BIT_8 | BIT_9 | BIT_10)
-#define BCM540X_AUX_10BASET_HD                      BIT_8
-#define BCM540X_AUX_10BASET_FD                      BIT_9
-#define BCM540X_AUX_100BASETX_HD                    (BIT_8 | BIT_9)
-#define BCM540X_AUX_100BASET4                       BIT_10
-#define BCM540X_AUX_100BASETX_FD                    (BIT_8 | BIT_10)
-#define BCM540X_AUX_100BASET_HD                     (BIT_9 | BIT_10)
-#define BCM540X_AUX_100BASET_FD                     (BIT_8 | BIT_9 | BIT_10)
-
-/* Interrupt status. */
-#define BCM540X_INT_STATUS_REG                      0x1a
-
-#define BCM540X_INT_LINK_CHANGE                     BIT_1
-#define BCM540X_INT_SPEED_CHANGE                    BIT_2
-#define BCM540X_INT_DUPLEX_CHANGE                   BIT_3
-#define BCM540X_INT_AUTO_NEG_PAGE_RX                BIT_10
-
-/* Interrupt mask register. */
-#define BCM540X_INT_MASK_REG                        0x1b
-
-/******************************************************************************/
-/* Register definitions. */
-/******************************************************************************/
-
-typedef volatile LM_UINT8 T3_8BIT_REGISTER, *PT3_8BIT_REGISTER;
-typedef volatile LM_UINT16 T3_16BIT_REGISTER, *PT3_16BIT_REGISTER;
-typedef volatile LM_UINT32 T3_32BIT_REGISTER, *PT3_32BIT_REGISTER;
-
-typedef struct {
-	/* Big endian format. */
-	T3_32BIT_REGISTER High;
-	T3_32BIT_REGISTER Low;
-} T3_64BIT_REGISTER, *PT3_64BIT_REGISTER;
-
-typedef T3_64BIT_REGISTER T3_64BIT_HOST_ADDR, *PT3_64BIT_HOST_ADDR;
-
-#define T3_NUM_OF_DMA_DESC    256
-#define T3_NUM_OF_MBUF        768
-
-typedef struct {
-	T3_64BIT_REGISTER host_addr;
-	T3_32BIT_REGISTER nic_mbuf;
-	T3_16BIT_REGISTER len;
-	T3_16BIT_REGISTER cqid_sqid;
-	T3_32BIT_REGISTER flags;
-	T3_32BIT_REGISTER opaque1;
-	T3_32BIT_REGISTER opaque2;
-	T3_32BIT_REGISTER opaque3;
-} T3_DMA_DESC, *PT3_DMA_DESC;
-
-/******************************************************************************/
-/* Ring control block. */
-/******************************************************************************/
-
-typedef struct {
-	T3_64BIT_REGISTER HostRingAddr;
-
-	union {
-		struct {
-#ifdef BIG_ENDIAN_HOST
-			T3_16BIT_REGISTER MaxLen;
-			T3_16BIT_REGISTER Flags;
-#else				/* BIG_ENDIAN_HOST */
-			T3_16BIT_REGISTER Flags;
-			T3_16BIT_REGISTER MaxLen;
-#endif
-		} s;
-
-		T3_32BIT_REGISTER MaxLen_Flags;
-	} u;
-
-	T3_32BIT_REGISTER NicRingAddr;
-} T3_RCB, *PT3_RCB;
-
-#define T3_RCB_FLAG_USE_EXT_RECV_BD                     BIT_0
-#define T3_RCB_FLAG_RING_DISABLED                       BIT_1
-
-/******************************************************************************/
-/* Status block. */
-/******************************************************************************/
-
-/*
- * Size of status block is actually 0x50 bytes.  Use 0x80 bytes for
- * cache line alignment.
- */
-#define T3_STATUS_BLOCK_SIZE                                    0x80
-
-typedef struct {
-	volatile LM_UINT32 Status;
-#define STATUS_BLOCK_UPDATED                                BIT_0
-#define STATUS_BLOCK_LINK_CHANGED_STATUS                    BIT_1
-#define STATUS_BLOCK_ERROR                                  BIT_2
-
-	volatile LM_UINT32 StatusTag;
-
-#ifdef BIG_ENDIAN_HOST
-	volatile LM_UINT16 RcvStdConIdx;
-	volatile LM_UINT16 RcvJumboConIdx;
-
-	volatile LM_UINT16 Reserved2;
-	volatile LM_UINT16 RcvMiniConIdx;
-
-	struct {
-		volatile LM_UINT16 SendConIdx;	/* Send consumer index. */
-		volatile LM_UINT16 RcvProdIdx;	/* Receive producer index. */
-	} Idx[16];
-#else				/* BIG_ENDIAN_HOST */
-	volatile LM_UINT16 RcvJumboConIdx;
-	volatile LM_UINT16 RcvStdConIdx;
-
-	volatile LM_UINT16 RcvMiniConIdx;
-	volatile LM_UINT16 Reserved2;
-
-	struct {
-		volatile LM_UINT16 RcvProdIdx;	/* Receive producer index. */
-		volatile LM_UINT16 SendConIdx;	/* Send consumer index. */
-	} Idx[16];
-#endif
-} T3_STATUS_BLOCK, *PT3_STATUS_BLOCK;
-
-/******************************************************************************/
-/* Receive buffer descriptors. */
-/******************************************************************************/
-
-typedef struct {
-	T3_64BIT_HOST_ADDR HostAddr;
-
-#ifdef BIG_ENDIAN_HOST
-	volatile LM_UINT16 Index;
-	volatile LM_UINT16 Len;
-
-	volatile LM_UINT16 Type;
-	volatile LM_UINT16 Flags;
-
-	volatile LM_UINT16 IpCksum;
-	volatile LM_UINT16 TcpUdpCksum;
-
-	volatile LM_UINT16 ErrorFlag;
-	volatile LM_UINT16 VlanTag;
-#else				/* BIG_ENDIAN_HOST */
-	volatile LM_UINT16 Len;
-	volatile LM_UINT16 Index;
-
-	volatile LM_UINT16 Flags;
-	volatile LM_UINT16 Type;
-
-	volatile LM_UINT16 TcpUdpCksum;
-	volatile LM_UINT16 IpCksum;
-
-	volatile LM_UINT16 VlanTag;
-	volatile LM_UINT16 ErrorFlag;
-#endif
-
-	volatile LM_UINT32 Reserved;
-	volatile LM_UINT32 Opaque;
-} T3_RCV_BD, *PT3_RCV_BD;
-
-typedef struct {
-	T3_64BIT_HOST_ADDR HostAddr[3];
-
-#ifdef BIG_ENDIAN_HOST
-	LM_UINT16 Len1;
-	LM_UINT16 Len2;
-
-	LM_UINT16 Len3;
-	LM_UINT16 Reserved1;
-#else				/* BIG_ENDIAN_HOST */
-	LM_UINT16 Len2;
-	LM_UINT16 Len1;
-
-	LM_UINT16 Reserved1;
-	LM_UINT16 Len3;
-#endif
-
-	T3_RCV_BD StdRcvBd;
-} T3_EXT_RCV_BD, *PT3_EXT_RCV_BD;
-
-/* Error flags. */
-#define RCV_BD_ERR_BAD_CRC                          0x0001
-#define RCV_BD_ERR_COLL_DETECT                      0x0002
-#define RCV_BD_ERR_LINK_LOST_DURING_PKT             0x0004
-#define RCV_BD_ERR_PHY_DECODE_ERR                   0x0008
-#define RCV_BD_ERR_ODD_NIBBLED_RCVD_MII             0x0010
-#define RCV_BD_ERR_MAC_ABORT                        0x0020
-#define RCV_BD_ERR_LEN_LT_64                        0x0040
-#define RCV_BD_ERR_TRUNC_NO_RESOURCES               0x0080
-#define RCV_BD_ERR_GIANT_FRAME_RCVD                 0x0100
-
-/* Buffer descriptor flags. */
-#define RCV_BD_FLAG_END                             0x0004
-#define RCV_BD_FLAG_JUMBO_RING                      0x0020
-#define RCV_BD_FLAG_VLAN_TAG                        0x0040
-#define RCV_BD_FLAG_FRAME_HAS_ERROR                 0x0400
-#define RCV_BD_FLAG_MINI_RING                       0x0800
-#define RCV_BD_FLAG_IP_CHKSUM_FIELD                 0x1000
-#define RCV_BD_FLAG_TCP_UDP_CHKSUM_FIELD            0x2000
-#define RCV_BD_FLAG_TCP_PACKET                      0x4000
-
-/******************************************************************************/
-/* Send buffer descriptor. */
-/******************************************************************************/
-
-typedef struct {
-	T3_64BIT_HOST_ADDR HostAddr;
-
-	union {
-		struct {
-#ifdef BIG_ENDIAN_HOST
-			LM_UINT16 Len;
-			LM_UINT16 Flags;
-#else				/* BIG_ENDIAN_HOST */
-			LM_UINT16 Flags;
-			LM_UINT16 Len;
-#endif
-		} s1;
-
-		LM_UINT32 Len_Flags;
-	} u1;
-
-	union {
-		struct {
-#ifdef BIG_ENDIAN_HOST
-			LM_UINT16 Reserved;
-			LM_UINT16 VlanTag;
-#else				/* BIG_ENDIAN_HOST */
-			LM_UINT16 VlanTag;
-			LM_UINT16 Reserved;
-#endif
-		} s2;
-
-		LM_UINT32 VlanTag;
-	} u2;
-} T3_SND_BD, *PT3_SND_BD;
-
-/* Send buffer descriptor flags. */
-#define SND_BD_FLAG_TCP_UDP_CKSUM                   0x0001
-#define SND_BD_FLAG_IP_CKSUM                        0x0002
-#define SND_BD_FLAG_END                             0x0004
-#define SND_BD_FLAG_IP_FRAG                         0x0008
-#define SND_BD_FLAG_IP_FRAG_END                     0x0010
-#define SND_BD_FLAG_VLAN_TAG                        0x0040
-#define SND_BD_FLAG_COAL_NOW                        0x0080
-#define SND_BD_FLAG_CPU_PRE_DMA                     0x0100
-#define SND_BD_FLAG_CPU_POST_DMA                    0x0200
-#define SND_BD_FLAG_INSERT_SRC_ADDR                 0x1000
-#define SND_BD_FLAG_CHOOSE_SRC_ADDR                 0x6000
-#define SND_BD_FLAG_DONT_GEN_CRC                    0x8000
-
-/* MBUFs */
-typedef struct T3_MBUF_FRAME_DESC {
-#ifdef BIG_ENDIAN_HOST
-	LM_UINT32 status_control;
-	union {
-		struct {
-			LM_UINT8 cqid;
-			LM_UINT8 reserved1;
-			LM_UINT16 length;
-		} s1;
-		LM_UINT32 word;
-	} u1;
-	union {
-		struct {
-			LM_UINT16 ip_hdr_start;
-			LM_UINT16 tcp_udp_hdr_start;
-		} s2;
-
-		LM_UINT32 word;
-	} u2;
-
-	union {
-		struct {
-			LM_UINT16 data_start;
-			LM_UINT16 vlan_id;
-		} s3;
-
-		LM_UINT32 word;
-	} u3;
-
-	union {
-		struct {
-			LM_UINT16 ip_checksum;
-			LM_UINT16 tcp_udp_checksum;
-		} s4;
-
-		LM_UINT32 word;
-	} u4;
-
-	union {
-		struct {
-			LM_UINT16 pseudo_checksum;
-			LM_UINT16 checksum_status;
-		} s5;
-
-		LM_UINT32 word;
-	} u5;
-
-	union {
-		struct {
-			LM_UINT16 rule_match;
-			LM_UINT8 class;
-			LM_UINT8 rupt;
-		} s6;
-
-		LM_UINT32 word;
-	} u6;
-
-	union {
-		struct {
-			LM_UINT16 reserved2;
-			LM_UINT16 mbuf_num;
-		} s7;
-
-		LM_UINT32 word;
-	} u7;
-
-	LM_UINT32 reserved3;
-	LM_UINT32 reserved4;
-#else
-	LM_UINT32 status_control;
-	union {
-		struct {
-			LM_UINT16 length;
-			LM_UINT8 reserved1;
-			LM_UINT8 cqid;
-		} s1;
-		LM_UINT32 word;
-	} u1;
-	union {
-		struct {
-			LM_UINT16 tcp_udp_hdr_start;
-			LM_UINT16 ip_hdr_start;
-		} s2;
-
-		LM_UINT32 word;
-	} u2;
-
-	union {
-		struct {
-			LM_UINT16 vlan_id;
-			LM_UINT16 data_start;
-		} s3;
-
-		LM_UINT32 word;
-	} u3;
-
-	union {
-		struct {
-			LM_UINT16 tcp_udp_checksum;
-			LM_UINT16 ip_checksum;
-		} s4;
-
-		LM_UINT32 word;
-	} u4;
-
-	union {
-		struct {
-			LM_UINT16 checksum_status;
-			LM_UINT16 pseudo_checksum;
-		} s5;
-
-		LM_UINT32 word;
-	} u5;
-
-	union {
-		struct {
-			LM_UINT8 rupt;
-			LM_UINT8 class;
-			LM_UINT16 rule_match;
-		} s6;
-
-		LM_UINT32 word;
-	} u6;
-
-	union {
-		struct {
-			LM_UINT16 mbuf_num;
-			LM_UINT16 reserved2;
-		} s7;
-
-		LM_UINT32 word;
-	} u7;
-
-	LM_UINT32 reserved3;
-	LM_UINT32 reserved4;
-#endif
-} T3_MBUF_FRAME_DESC, *PT3_MBUF_FRAME_DESC;
-
-typedef struct T3_MBUF_HDR {
-	union {
-		struct {
-			unsigned int C:1;
-			unsigned int F:1;
-			unsigned int reserved1:7;
-			unsigned int next_mbuf:16;
-			unsigned int length:7;
-		} s1;
-
-		LM_UINT32 word;
-	} u1;
-
-	LM_UINT32 next_frame_ptr;
-} T3_MBUF_HDR, *PT3_MBUF_HDR;
-
-typedef struct T3_MBUF {
-	T3_MBUF_HDR hdr;
-	union {
-		struct {
-			T3_MBUF_FRAME_DESC frame_hdr;
-			LM_UINT32 data[20];
-		} s1;
-
-		struct {
-			LM_UINT32 data[30];
-		} s2;
-	} body;
-} T3_MBUF, *PT3_MBUF;
-
-#define T3_MBUF_BASE   (T3_NIC_MBUF_POOL_ADDR >> 7)
-#define T3_MBUF_END    ((T3_NIC_MBUF_POOL_ADDR + T3_NIC_MBUF_POOL_SIZE) >> 7)
-
-/******************************************************************************/
-/* Statistics block. */
-/******************************************************************************/
-
-typedef struct {
-	LM_UINT8 Reserved0[0x400 - 0x300];
-
-	/* Statistics maintained by Receive MAC. */
-	T3_64BIT_REGISTER ifHCInOctets;
-	T3_64BIT_REGISTER Reserved1;
-	T3_64BIT_REGISTER etherStatsFragments;
-	T3_64BIT_REGISTER ifHCInUcastPkts;
-	T3_64BIT_REGISTER ifHCInMulticastPkts;
-	T3_64BIT_REGISTER ifHCInBroadcastPkts;
-	T3_64BIT_REGISTER dot3StatsFCSErrors;
-	T3_64BIT_REGISTER dot3StatsAlignmentErrors;
-	T3_64BIT_REGISTER xonPauseFramesReceived;
-	T3_64BIT_REGISTER xoffPauseFramesReceived;
-	T3_64BIT_REGISTER macControlFramesReceived;
-	T3_64BIT_REGISTER xoffStateEntered;
-	T3_64BIT_REGISTER dot3StatsFramesTooLong;
-	T3_64BIT_REGISTER etherStatsJabbers;
-	T3_64BIT_REGISTER etherStatsUndersizePkts;
-	T3_64BIT_REGISTER inRangeLengthError;
-	T3_64BIT_REGISTER outRangeLengthError;
-	T3_64BIT_REGISTER etherStatsPkts64Octets;
-	T3_64BIT_REGISTER etherStatsPkts65Octetsto127Octets;
-	T3_64BIT_REGISTER etherStatsPkts128Octetsto255Octets;
-	T3_64BIT_REGISTER etherStatsPkts256Octetsto511Octets;
-	T3_64BIT_REGISTER etherStatsPkts512Octetsto1023Octets;
-	T3_64BIT_REGISTER etherStatsPkts1024Octetsto1522Octets;
-	T3_64BIT_REGISTER etherStatsPkts1523Octetsto2047Octets;
-	T3_64BIT_REGISTER etherStatsPkts2048Octetsto4095Octets;
-	T3_64BIT_REGISTER etherStatsPkts4096Octetsto8191Octets;
-	T3_64BIT_REGISTER etherStatsPkts8192Octetsto9022Octets;
-
-	T3_64BIT_REGISTER Unused1[37];
-
-	/* Statistics maintained by Transmit MAC. */
-	T3_64BIT_REGISTER ifHCOutOctets;
-	T3_64BIT_REGISTER Reserved2;
-	T3_64BIT_REGISTER etherStatsCollisions;
-	T3_64BIT_REGISTER outXonSent;
-	T3_64BIT_REGISTER outXoffSent;
-	T3_64BIT_REGISTER flowControlDone;
-	T3_64BIT_REGISTER dot3StatsInternalMacTransmitErrors;
-	T3_64BIT_REGISTER dot3StatsSingleCollisionFrames;
-	T3_64BIT_REGISTER dot3StatsMultipleCollisionFrames;
-	T3_64BIT_REGISTER dot3StatsDeferredTransmissions;
-	T3_64BIT_REGISTER Reserved3;
-	T3_64BIT_REGISTER dot3StatsExcessiveCollisions;
-	T3_64BIT_REGISTER dot3StatsLateCollisions;
-	T3_64BIT_REGISTER dot3Collided2Times;
-	T3_64BIT_REGISTER dot3Collided3Times;
-	T3_64BIT_REGISTER dot3Collided4Times;
-	T3_64BIT_REGISTER dot3Collided5Times;
-	T3_64BIT_REGISTER dot3Collided6Times;
-	T3_64BIT_REGISTER dot3Collided7Times;
-	T3_64BIT_REGISTER dot3Collided8Times;
-	T3_64BIT_REGISTER dot3Collided9Times;
-	T3_64BIT_REGISTER dot3Collided10Times;
-	T3_64BIT_REGISTER dot3Collided11Times;
-	T3_64BIT_REGISTER dot3Collided12Times;
-	T3_64BIT_REGISTER dot3Collided13Times;
-	T3_64BIT_REGISTER dot3Collided14Times;
-	T3_64BIT_REGISTER dot3Collided15Times;
-	T3_64BIT_REGISTER ifHCOutUcastPkts;
-	T3_64BIT_REGISTER ifHCOutMulticastPkts;
-	T3_64BIT_REGISTER ifHCOutBroadcastPkts;
-	T3_64BIT_REGISTER dot3StatsCarrierSenseErrors;
-	T3_64BIT_REGISTER ifOutDiscards;
-	T3_64BIT_REGISTER ifOutErrors;
-
-	T3_64BIT_REGISTER Unused2[31];
-
-	/* Statistics maintained by Receive List Placement. */
-	T3_64BIT_REGISTER COSIfHCInPkts[16];
-	T3_64BIT_REGISTER COSFramesDroppedDueToFilters;
-	T3_64BIT_REGISTER nicDmaWriteQueueFull;
-	T3_64BIT_REGISTER nicDmaWriteHighPriQueueFull;
-	T3_64BIT_REGISTER nicNoMoreRxBDs;
-	T3_64BIT_REGISTER ifInDiscards;
-	T3_64BIT_REGISTER ifInErrors;
-	T3_64BIT_REGISTER nicRecvThresholdHit;
-
-	T3_64BIT_REGISTER Unused3[9];
-
-	/* Statistics maintained by Send Data Initiator. */
-	T3_64BIT_REGISTER COSIfHCOutPkts[16];
-	T3_64BIT_REGISTER nicDmaReadQueueFull;
-	T3_64BIT_REGISTER nicDmaReadHighPriQueueFull;
-	T3_64BIT_REGISTER nicSendDataCompQueueFull;
-
-	/* Statistics maintained by Host Coalescing. */
-	T3_64BIT_REGISTER nicRingSetSendProdIndex;
-	T3_64BIT_REGISTER nicRingStatusUpdate;
-	T3_64BIT_REGISTER nicInterrupts;
-	T3_64BIT_REGISTER nicAvoidedInterrupts;
-	T3_64BIT_REGISTER nicSendThresholdHit;
-
-	LM_UINT8 Reserved4[0xb00 - 0x9c0];
-} T3_STATS_BLOCK, *PT3_STATS_BLOCK;
-
-/******************************************************************************/
-/* PCI configuration registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_16BIT_REGISTER VendorId;
-	T3_16BIT_REGISTER DeviceId;
-
-	T3_16BIT_REGISTER Command;
-	T3_16BIT_REGISTER Status;
-
-	T3_32BIT_REGISTER ClassCodeRevId;
-
-	T3_8BIT_REGISTER CacheLineSize;
-	T3_8BIT_REGISTER LatencyTimer;
-	T3_8BIT_REGISTER HeaderType;
-	T3_8BIT_REGISTER Bist;
-
-	T3_32BIT_REGISTER MemBaseAddrLow;
-	T3_32BIT_REGISTER MemBaseAddrHigh;
-
-	LM_UINT8 Unused1[20];
-
-	T3_16BIT_REGISTER SubsystemVendorId;
-	T3_16BIT_REGISTER SubsystemId;
-
-	T3_32BIT_REGISTER RomBaseAddr;
-
-	T3_8BIT_REGISTER PciXCapiblityPtr;
-	LM_UINT8 Unused2[7];
-
-	T3_8BIT_REGISTER IntLine;
-	T3_8BIT_REGISTER IntPin;
-	T3_8BIT_REGISTER MinGnt;
-	T3_8BIT_REGISTER MaxLat;
-
-	T3_8BIT_REGISTER PciXCapabilities;
-	T3_8BIT_REGISTER PmCapabilityPtr;
-	T3_16BIT_REGISTER PciXCommand;
-
-	T3_32BIT_REGISTER PciXStatus;
-
-	T3_8BIT_REGISTER PmCapabilityId;
-	T3_8BIT_REGISTER VpdCapabilityPtr;
-	T3_16BIT_REGISTER PmCapabilities;
-
-	T3_16BIT_REGISTER PmCtrlStatus;
-#define PM_CTRL_PME_STATUS            BIT_15
-#define PM_CTRL_PME_ENABLE            BIT_8
-#define PM_CTRL_PME_POWER_STATE_D0    0
-#define PM_CTRL_PME_POWER_STATE_D1    1
-#define PM_CTRL_PME_POWER_STATE_D2    2
-#define PM_CTRL_PME_POWER_STATE_D3H   3
-
-	T3_8BIT_REGISTER BridgeSupportExt;
-	T3_8BIT_REGISTER PmData;
-
-	T3_8BIT_REGISTER VpdCapabilityId;
-	T3_8BIT_REGISTER MsiCapabilityPtr;
-	T3_16BIT_REGISTER VpdAddrFlag;
-#define VPD_FLAG_WRITE      (1 << 15)
-#define VPD_FLAG_RW_MASK    (1 << 15)
-#define VPD_FLAG_READ       0
-
-	T3_32BIT_REGISTER VpdData;
-
-	T3_8BIT_REGISTER MsiCapabilityId;
-	T3_8BIT_REGISTER NextCapabilityPtr;
-	T3_16BIT_REGISTER MsiCtrl;
-#define MSI_CTRL_64BIT_CAP     (1 << 7)
-#define MSI_CTRL_MSG_ENABLE(x) (x << 4)
-#define MSI_CTRL_MSG_CAP(x)    (x << 1)
-#define MSI_CTRL_ENABLE        (1 << 0)
-
-	T3_32BIT_REGISTER MsiAddrLow;
-	T3_32BIT_REGISTER MsiAddrHigh;
-
-	T3_16BIT_REGISTER MsiData;
-	T3_16BIT_REGISTER Unused3;
-
-	T3_32BIT_REGISTER MiscHostCtrl;
-#define MISC_HOST_CTRL_CLEAR_INT                        BIT_0
-#define MISC_HOST_CTRL_MASK_PCI_INT                     BIT_1
-#define MISC_HOST_CTRL_ENABLE_ENDIAN_BYTE_SWAP          BIT_2
-#define MISC_HOST_CTRL_ENABLE_ENDIAN_WORD_SWAP          BIT_3
-#define MISC_HOST_CTRL_ENABLE_PCI_STATE_REG_RW          BIT_4
-#define MISC_HOST_CTRL_ENABLE_CLK_REG_RW                BIT_5
-#define MISC_HOST_CTRL_ENABLE_REG_WORD_SWAP             BIT_6
-#define MISC_HOST_CTRL_ENABLE_INDIRECT_ACCESS           BIT_7
-#define MISC_HOST_CTRL_ENABLE_INT_MASK_MODE             BIT_8
-#define MISC_HOST_CTRL_ENABLE_TAGGED_STATUS_MODE        BIT_9
-
-	T3_32BIT_REGISTER DmaReadWriteCtrl;
-#define DMA_CTRL_WRITE_BOUNDARY_MASK            (BIT_11 | BIT_12 | BIT_13)
-#define DMA_CTRL_WRITE_BOUNDARY_DISABLE         0
-#define DMA_CTRL_WRITE_BOUNDARY_16              BIT_11
-#define DMA_CTRL_WRITE_BOUNDARY_32              BIT_12
-#define DMA_CTRL_WRITE_BOUNDARY_64              (BIT_12 | BIT_11)
-#define DMA_CTRL_WRITE_BOUNDARY_128             BIT_13
-#define DMA_CTRL_WRITE_BOUNDARY_256             (BIT_13 | BIT_11)
-#define DMA_CTRL_WRITE_BOUNDARY_512             (BIT_13 | BIT_12)
-#define DMA_CTRL_WRITE_BOUNDARY_1024            (BIT_13 | BIT_12 | BIT_11)
-#define DMA_CTRL_WRITE_ONE_DMA_AT_ONCE          BIT_14
-
-	T3_32BIT_REGISTER PciState;
-#define T3_PCI_STATE_FORCE_PCI_RESET                    BIT_0
-#define T3_PCI_STATE_INTERRUPT_NOT_ACTIVE               BIT_1
-#define T3_PCI_STATE_NOT_PCI_X_BUS                      BIT_2
-#define T3_PCI_STATE_HIGH_BUS_SPEED                     BIT_3
-#define T3_PCI_STATE_32BIT_PCI_BUS                      BIT_4
-#define T3_PCI_STATE_PCI_ROM_ENABLE                     BIT_5
-#define T3_PCI_STATE_PCI_ROM_RETRY_ENABLE               BIT_6
-#define T3_PCI_STATE_FLAT_VIEW                          BIT_8
-#define T3_PCI_STATE_RETRY_SAME_DMA                     BIT_13
-
-	T3_32BIT_REGISTER ClockCtrl;
-#define T3_PCI_CLKCTRL_TXCPU_CLK_DISABLE                BIT_11
-#define T3_PCI_CLKCTRL_RXCPU_CLK_DISABLE                BIT_10
-#define T3_PCI_CLKCTRL_CORE_CLK_DISABLE                 BIT_9
-
-	T3_32BIT_REGISTER RegBaseAddr;
-
-	T3_32BIT_REGISTER MemWindowBaseAddr;
-
-#ifdef NIC_CPU_VIEW
-	/* These registers are ONLY visible to NIC CPU */
-	T3_32BIT_REGISTER PowerConsumed;
-	T3_32BIT_REGISTER PowerDissipated;
-#else				/* NIC_CPU_VIEW */
-	T3_32BIT_REGISTER RegData;
-	T3_32BIT_REGISTER MemWindowData;
-#endif				/* !NIC_CPU_VIEW */
-
-	T3_32BIT_REGISTER ModeCtrl;
-
-	T3_32BIT_REGISTER MiscCfg;
-
-	T3_32BIT_REGISTER MiscLocalCtrl;
-
-	T3_32BIT_REGISTER Unused4;
-
-	/* NOTE: Big/Little-endian clarification needed.  Are these register */
-	/* in big or little endian formate. */
-	T3_64BIT_REGISTER StdRingProdIdx;
-	T3_64BIT_REGISTER RcvRetRingConIdx;
-	T3_64BIT_REGISTER SndProdIdx;
-
-	LM_UINT8 Unused5[80];
-} T3_PCI_CONFIGURATION, *PT3_PCI_CONFIGURATION;
-
-#define PCIX_CMD_MAX_SPLIT_MASK                         0x0070
-#define PCIX_CMD_MAX_SPLIT_SHL                          4
-#define PCIX_CMD_MAX_BURST_MASK                         0x000c
-#define PCIX_CMD_MAX_BURST_SHL                          2
-#define PCIX_CMD_MAX_BURST_CPIOB                        2
-
-/******************************************************************************/
-/* Mac control registers. */
-/******************************************************************************/
-
-typedef struct {
-	/* MAC mode control. */
-	T3_32BIT_REGISTER Mode;
-#define MAC_MODE_GLOBAL_RESET                       BIT_0
-#define MAC_MODE_HALF_DUPLEX                        BIT_1
-#define MAC_MODE_PORT_MODE_MASK                     (BIT_2 | BIT_3)
-#define MAC_MODE_PORT_MODE_TBI                      (BIT_2 | BIT_3)
-#define MAC_MODE_PORT_MODE_GMII                     BIT_3
-#define MAC_MODE_PORT_MODE_MII                      BIT_2
-#define MAC_MODE_PORT_MODE_NONE                     BIT_NONE
-#define MAC_MODE_PORT_INTERNAL_LOOPBACK             BIT_4
-#define MAC_MODE_TAGGED_MAC_CONTROL                 BIT_7
-#define MAC_MODE_TX_BURSTING                        BIT_8
-#define MAC_MODE_MAX_DEFER                          BIT_9
-#define MAC_MODE_LINK_POLARITY                      BIT_10
-#define MAC_MODE_ENABLE_RX_STATISTICS               BIT_11
-#define MAC_MODE_CLEAR_RX_STATISTICS                BIT_12
-#define MAC_MODE_FLUSH_RX_STATISTICS                BIT_13
-#define MAC_MODE_ENABLE_TX_STATISTICS               BIT_14
-#define MAC_MODE_CLEAR_TX_STATISTICS                BIT_15
-#define MAC_MODE_FLUSH_TX_STATISTICS                BIT_16
-#define MAC_MODE_SEND_CONFIGS                       BIT_17
-#define MAC_MODE_DETECT_MAGIC_PACKET_ENABLE         BIT_18
-#define MAC_MODE_ACPI_POWER_ON_ENABLE               BIT_19
-#define MAC_MODE_ENABLE_MIP                         BIT_20
-#define MAC_MODE_ENABLE_TDE                         BIT_21
-#define MAC_MODE_ENABLE_RDE                         BIT_22
-#define MAC_MODE_ENABLE_FHDE                        BIT_23
-
-	/* MAC status */
-	T3_32BIT_REGISTER Status;
-#define MAC_STATUS_PCS_SYNCED                       BIT_0
-#define MAC_STATUS_SIGNAL_DETECTED                  BIT_1
-#define MAC_STATUS_RECEIVING_CFG                    BIT_2
-#define MAC_STATUS_CFG_CHANGED                      BIT_3
-#define MAC_STATUS_SYNC_CHANGED                     BIT_4
-#define MAC_STATUS_PORT_DECODE_ERROR                BIT_10
-#define MAC_STATUS_LINK_STATE_CHANGED               BIT_12
-#define MAC_STATUS_MI_COMPLETION                    BIT_22
-#define MAC_STATUS_MI_INTERRUPT                     BIT_23
-#define MAC_STATUS_AP_ERROR                         BIT_24
-#define MAC_STATUS_ODI_ERROR                        BIT_25
-#define MAC_STATUS_RX_STATS_OVERRUN                 BIT_26
-#define MAC_STATUS_TX_STATS_OVERRUN                 BIT_27
-
-	/* Event Enable */
-	T3_32BIT_REGISTER MacEvent;
-#define MAC_EVENT_ENABLE_PORT_DECODE_ERR            BIT_10
-#define MAC_EVENT_ENABLE_LINK_STATE_CHANGED_ATTN    BIT_12
-#define MAC_EVENT_ENABLE_MI_COMPLETION              BIT_22
-#define MAC_EVENT_ENABLE_MI_INTERRUPT               BIT_23
-#define MAC_EVENT_ENABLE_AP_ERROR                   BIT_24
-#define MAC_EVENT_ENABLE_ODI_ERROR                  BIT_25
-#define MAC_EVENT_ENABLE_RX_STATS_OVERRUN           BIT_26
-#define MAC_EVENT_ENABLE_TX_STATS_OVERRUN           BIT_27
-
-	/* Led control. */
-	T3_32BIT_REGISTER LedCtrl;
-#define LED_CTRL_OVERRIDE_LINK_LED                  BIT_0
-#define LED_CTRL_1000MBPS_LED_ON                    BIT_1
-#define LED_CTRL_100MBPS_LED_ON                     BIT_2
-#define LED_CTRL_10MBPS_LED_ON                      BIT_3
-#define LED_CTRL_OVERRIDE_TRAFFIC_LED               BIT_4
-#define LED_CTRL_BLINK_TRAFFIC_LED                  BIT_5
-#define LED_CTRL_TRAFFIC_LED                        BIT_6
-#define LED_CTRL_1000MBPS_LED_STATUS                BIT_7
-#define LED_CTRL_100MBPS_LED_STATUS                 BIT_8
-#define LED_CTRL_10MBPS_LED_STATUS                  BIT_9
-#define LED_CTRL_TRAFFIC_LED_STATUS                 BIT_10
-#define LED_CTRL_MAC_MODE                           BIT_NONE
-#define LED_CTRL_PHY_MODE_1                         BIT_11
-#define LED_CTRL_PHY_MODE_2                         BIT_12
-#define LED_CTRL_BLINK_RATE_MASK                    0x7ff80000
-#define LED_CTRL_OVERRIDE_BLINK_PERIOD              BIT_19
-#define LED_CTRL_OVERRIDE_BLINK_RATE                BIT_31
-
-	/* MAC addresses. */
-	struct {
-		T3_32BIT_REGISTER High;	/* Upper 2 bytes. */
-		T3_32BIT_REGISTER Low;	/* Lower 4 bytes. */
-	} MacAddr[4];
-
-	/* ACPI Mbuf pointer. */
-	T3_32BIT_REGISTER AcpiMbufPtr;
-
-	/* ACPI Length and Offset. */
-	T3_32BIT_REGISTER AcpiLengthOffset;
-#define ACPI_LENGTH_MASK                            0xffff
-#define ACPI_OFFSET_MASK                            0x0fff0000
-#define ACPI_LENGTH(x)                              x
-#define ACPI_OFFSET(x)                              ((x) << 16)
-
-	/* Transmit random backoff. */
-	T3_32BIT_REGISTER TxBackoffSeed;
-#define MAC_TX_BACKOFF_SEED_MASK                    0x3ff
-
-	/* Receive MTU */
-	T3_32BIT_REGISTER MtuSize;
-#define MAC_RX_MTU_MASK                             0xffff
-
-	/* Gigabit PCS Test. */
-	T3_32BIT_REGISTER PcsTest;
-#define MAC_PCS_TEST_DATA_PATTERN_MASK              0x0fffff
-#define MAC_PCS_TEST_ENABLE                         BIT_20
-
-	/* Transmit Gigabit Auto-Negotiation. */
-	T3_32BIT_REGISTER TxAutoNeg;
-#define MAC_AN_TX_AN_DATA_MASK                      0xffff
-
-	/* Receive Gigabit Auto-Negotiation. */
-	T3_32BIT_REGISTER RxAutoNeg;
-#define MAC_AN_RX_AN_DATA_MASK                      0xffff
-
-	/* MI Communication. */
-	T3_32BIT_REGISTER MiCom;
-#define MI_COM_CMD_MASK                             (BIT_26 | BIT_27)
-#define MI_COM_CMD_WRITE                            BIT_26
-#define MI_COM_CMD_READ                             BIT_27
-#define MI_COM_READ_FAILED                          BIT_28
-#define MI_COM_START                                BIT_29
-#define MI_COM_BUSY                                 BIT_29
-
-#define MI_COM_PHY_ADDR_MASK                        0x1f
-#define MI_COM_FIRST_PHY_ADDR_BIT                   21
-
-#define MI_COM_PHY_REG_ADDR_MASK                    0x1f
-#define MI_COM_FIRST_PHY_REG_ADDR_BIT               16
-
-#define MI_COM_PHY_DATA_MASK                        0xffff
-
-	/* MI Status. */
-	T3_32BIT_REGISTER MiStatus;
-#define MI_STATUS_ENABLE_LINK_STATUS_ATTN           BIT_0
-
-	/* MI Mode. */
-	T3_32BIT_REGISTER MiMode;
-#define MI_MODE_CLOCK_SPEED_10MHZ                   BIT_0
-#define MI_MODE_USE_SHORT_PREAMBLE                  BIT_1
-#define MI_MODE_AUTO_POLLING_ENABLE                 BIT_4
-#define MI_MODE_CORE_CLOCK_SPEED_62MHZ              BIT_15
-
-	/* Auto-polling status. */
-	T3_32BIT_REGISTER AutoPollStatus;
-#define AUTO_POLL_ERROR                             BIT_0
-
-	/* Transmit MAC mode. */
-	T3_32BIT_REGISTER TxMode;
-#define TX_MODE_RESET                               BIT_0
-#define TX_MODE_ENABLE                              BIT_1
-#define TX_MODE_ENABLE_FLOW_CONTROL                 BIT_4
-#define TX_MODE_ENABLE_BIG_BACKOFF                  BIT_5
-#define TX_MODE_ENABLE_LONG_PAUSE                   BIT_6
-
-	/* Transmit MAC status. */
-	T3_32BIT_REGISTER TxStatus;
-#define TX_STATUS_RX_CURRENTLY_XOFFED               BIT_0
-#define TX_STATUS_SENT_XOFF                         BIT_1
-#define TX_STATUS_SENT_XON                          BIT_2
-#define TX_STATUS_LINK_UP                           BIT_3
-#define TX_STATUS_ODI_UNDERRUN                      BIT_4
-#define TX_STATUS_ODI_OVERRUN                       BIT_5
-
-	/* Transmit MAC length. */
-	T3_32BIT_REGISTER TxLengths;
-#define TX_LEN_SLOT_TIME_MASK                       0xff
-#define TX_LEN_IPG_MASK                             0x0f00
-#define TX_LEN_IPG_CRS_MASK                         (BIT_12 | BIT_13)
-
-	/* Receive MAC mode. */
-	T3_32BIT_REGISTER RxMode;
-#define RX_MODE_RESET                               BIT_0
-#define RX_MODE_ENABLE                              BIT_1
-#define RX_MODE_ENABLE_FLOW_CONTROL                 BIT_2
-#define RX_MODE_KEEP_MAC_CONTROL                    BIT_3
-#define RX_MODE_KEEP_PAUSE                          BIT_4
-#define RX_MODE_ACCEPT_OVERSIZED                    BIT_5
-#define RX_MODE_ACCEPT_RUNTS                        BIT_6
-#define RX_MODE_LENGTH_CHECK                        BIT_7
-#define RX_MODE_PROMISCUOUS_MODE                    BIT_8
-#define RX_MODE_NO_CRC_CHECK                        BIT_9
-#define RX_MODE_KEEP_VLAN_TAG                       BIT_10
-
-	/* Receive MAC status. */
-	T3_32BIT_REGISTER RxStatus;
-#define RX_STATUS_REMOTE_TRANSMITTER_XOFFED         BIT_0
-#define RX_STATUS_XOFF_RECEIVED                     BIT_1
-#define RX_STATUS_XON_RECEIVED                      BIT_2
-
-	/* Hash registers. */
-	T3_32BIT_REGISTER HashReg[4];
-
-	/* Receive placement rules registers. */
-	struct {
-		T3_32BIT_REGISTER Rule;
-		T3_32BIT_REGISTER Value;
-	} RcvRules[16];
-
-#define RCV_DISABLE_RULE_MASK                       0x7fffffff
-
-#define RCV_RULE1_REJECT_BROADCAST_IDX              0x00
-#define REJECT_BROADCAST_RULE1_RULE                 0xc2000000
-#define REJECT_BROADCAST_RULE1_VALUE                0xffffffff
-
-#define RCV_RULE2_REJECT_BROADCAST_IDX              0x01
-#define REJECT_BROADCAST_RULE2_RULE                 0x86000004
-#define REJECT_BROADCAST_RULE2_VALUE                0xffffffff
-
-#if INCLUDE_5701_AX_FIX
-#define RCV_LAST_RULE_IDX                           0x04
-#else
-#define RCV_LAST_RULE_IDX                           0x02
-#endif
-
-	T3_32BIT_REGISTER RcvRuleCfg;
-#define RX_RULE_DEFAULT_CLASS                       (1 << 3)
-
-	LM_UINT8 Reserved1[140];
-
-	T3_32BIT_REGISTER SerdesCfg;
-	T3_32BIT_REGISTER SerdesStatus;
-
-	LM_UINT8 Reserved2[104];
-
-	volatile LM_UINT8 TxMacState[16];
-	volatile LM_UINT8 RxMacState[20];
-
-	LM_UINT8 Reserved3[476];
-
-	T3_32BIT_REGISTER RxStats[26];
-
-	LM_UINT8 Reserved4[24];
-
-	T3_32BIT_REGISTER TxStats[28];
-
-	LM_UINT8 Reserved5[784];
-} T3_MAC_CONTROL, *PT3_MAC_CONTROL;
-
-/******************************************************************************/
-/* Send data initiator control registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define T3_SND_DATA_IN_MODE_RESET                       BIT_0
-#define T3_SND_DATA_IN_MODE_ENABLE                      BIT_1
-#define T3_SND_DATA_IN_MODE_STATS_OFLW_ATTN_ENABLE      BIT_2
-
-	T3_32BIT_REGISTER Status;
-#define T3_SND_DATA_IN_STATUS_STATS_OFLW_ATTN           BIT_2
-
-	T3_32BIT_REGISTER StatsCtrl;
-#define T3_SND_DATA_IN_STATS_CTRL_ENABLE                BIT_0
-#define T3_SND_DATA_IN_STATS_CTRL_FASTER_UPDATE         BIT_1
-#define T3_SND_DATA_IN_STATS_CTRL_CLEAR                 BIT_2
-#define T3_SND_DATA_IN_STATS_CTRL_FLUSH                 BIT_3
-#define T3_SND_DATA_IN_STATS_CTRL_FORCE_ZERO            BIT_4
-
-	T3_32BIT_REGISTER StatsEnableMask;
-	T3_32BIT_REGISTER StatsIncMask;
-
-	LM_UINT8 Reserved[108];
-
-	T3_32BIT_REGISTER ClassOfServCnt[16];
-	T3_32BIT_REGISTER DmaReadQFullCnt;
-	T3_32BIT_REGISTER DmaPriorityReadQFullCnt;
-	T3_32BIT_REGISTER SdcQFullCnt;
-
-	T3_32BIT_REGISTER NicRingSetSendProdIdxCnt;
-	T3_32BIT_REGISTER StatusUpdatedCnt;
-	T3_32BIT_REGISTER InterruptsCnt;
-	T3_32BIT_REGISTER AvoidInterruptsCnt;
-	T3_32BIT_REGISTER SendThresholdHitCnt;
-
-	/* Unused space. */
-	LM_UINT8 Unused[800];
-} T3_SEND_DATA_INITIATOR, *PT3_SEND_DATA_INITIATOR;
-
-/******************************************************************************/
-/* Send data completion control registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define SND_DATA_COMP_MODE_RESET                        BIT_0
-#define SND_DATA_COMP_MODE_ENABLE                       BIT_1
-
-	/* Unused space. */
-	LM_UINT8 Unused[1020];
-} T3_SEND_DATA_COMPLETION, *PT3_SEND_DATA_COMPLETION;
-
-/******************************************************************************/
-/* Send BD Ring Selector Control Registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define SND_BD_SEL_MODE_RESET                           BIT_0
-#define SND_BD_SEL_MODE_ENABLE                          BIT_1
-#define SND_BD_SEL_MODE_ATTN_ENABLE                     BIT_2
-
-	T3_32BIT_REGISTER Status;
-#define SND_BD_SEL_STATUS_ERROR_ATTN                    BIT_2
-
-	T3_32BIT_REGISTER HwDiag;
-
-	/* Unused space. */
-	LM_UINT8 Unused1[52];
-
-	/* Send BD Ring Selector Local NIC Send BD Consumer Index. */
-	T3_32BIT_REGISTER NicSendBdSelConIdx[16];
-
-	/* Unused space. */
-	LM_UINT8 Unused2[896];
-} T3_SEND_BD_SELECTOR, *PT3_SEND_BD_SELECTOR;
-
-/******************************************************************************/
-/* Send BD initiator control registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define SND_BD_IN_MODE_RESET                            BIT_0
-#define SND_BD_IN_MODE_ENABLE                           BIT_1
-#define SND_BD_IN_MODE_ATTN_ENABLE                      BIT_2
-
-	T3_32BIT_REGISTER Status;
-#define SND_BD_IN_STATUS_ERROR_ATTN                     BIT_2
-
-	/* Send BD initiator local NIC send BD producer index. */
-	T3_32BIT_REGISTER NicSendBdInProdIdx[16];
-
-	/* Unused space. */
-	LM_UINT8 Unused2[952];
-} T3_SEND_BD_INITIATOR, *PT3_SEND_BD_INITIATOR;
-
-/******************************************************************************/
-/* Send BD Completion Control. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define SND_BD_COMP_MODE_RESET                          BIT_0
-#define SND_BD_COMP_MODE_ENABLE                         BIT_1
-#define SND_BD_COMP_MODE_ATTN_ENABLE                    BIT_2
-
-	/* Unused space. */
-	LM_UINT8 Unused2[1020];
-} T3_SEND_BD_COMPLETION, *PT3_SEND_BD_COMPLETION;
-
-/******************************************************************************/
-/* Receive list placement control registers. */
-/******************************************************************************/
-
-typedef struct {
-	/* Mode. */
-	T3_32BIT_REGISTER Mode;
-#define RCV_LIST_PLMT_MODE_RESET                        BIT_0
-#define RCV_LIST_PLMT_MODE_ENABLE                       BIT_1
-#define RCV_LIST_PLMT_MODE_CLASS0_ATTN_ENABLE           BIT_2
-#define RCV_LIST_PLMT_MODE_MAPPING_OOR_ATTN_ENABLE      BIT_3
-#define RCV_LIST_PLMT_MODE_STATS_OFLOW_ATTN_ENABLE      BIT_4
-
-	/* Status. */
-	T3_32BIT_REGISTER Status;
-#define RCV_LIST_PLMT_STATUS_CLASS0_ATTN                BIT_2
-#define RCV_LIST_PLMT_STATUS_MAPPING_ATTN               BIT_3
-#define RCV_LIST_PLMT_STATUS_STATS_OFLOW_ATTN           BIT_4
-
-	/* Receive selector list lock register. */
-	T3_32BIT_REGISTER Lock;
-#define RCV_LIST_SEL_LOCK_REQUEST_MASK                  0xffff
-#define RCV_LIST_SEL_LOCK_GRANT_MASK                    0xffff0000
-
-	/* Selector non-empty bits. */
-	T3_32BIT_REGISTER NonEmptyBits;
-#define RCV_LIST_SEL_NON_EMPTY_MASK                     0xffff
-
-	/* Receive list placement configuration register. */
-	T3_32BIT_REGISTER Config;
-
-	/* Receive List Placement statistics Control. */
-	T3_32BIT_REGISTER StatsCtrl;
-#define RCV_LIST_STATS_ENABLE                               BIT_0
-#define RCV_LIST_STATS_FAST_UPDATE                          BIT_1
-
-	/* Receive List Placement statistics Enable Mask. */
-	T3_32BIT_REGISTER StatsEnableMask;
-
-	/* Receive List Placement statistics Increment Mask. */
-	T3_32BIT_REGISTER StatsIncMask;
-
-	/* Unused space. */
-	LM_UINT8 Unused1[224];
-
-	struct {
-		T3_32BIT_REGISTER Head;
-		T3_32BIT_REGISTER Tail;
-		T3_32BIT_REGISTER Count;
-
-		/* Unused space. */
-		LM_UINT8 Unused[4];
-	} RcvSelectorList[16];
-
-	/* Local statistics counter. */
-	T3_32BIT_REGISTER ClassOfServCnt[16];
-
-	T3_32BIT_REGISTER DropDueToFilterCnt;
-	T3_32BIT_REGISTER DmaWriteQFullCnt;
-	T3_32BIT_REGISTER DmaHighPriorityWriteQFullCnt;
-	T3_32BIT_REGISTER NoMoreReceiveBdCnt;
-	T3_32BIT_REGISTER IfInDiscardsCnt;
-	T3_32BIT_REGISTER IfInErrorsCnt;
-	T3_32BIT_REGISTER RcvThresholdHitCnt;
-
-	/* Another unused space. */
-	LM_UINT8 Unused2[420];
-} T3_RCV_LIST_PLACEMENT, *PT3_RCV_LIST_PLACEMENT;
-
-/******************************************************************************/
-/* Receive Data and Receive BD Initiator Control. */
-/******************************************************************************/
-
-typedef struct {
-	/* Mode. */
-	T3_32BIT_REGISTER Mode;
-#define RCV_DATA_BD_IN_MODE_RESET                   BIT_0
-#define RCV_DATA_BD_IN_MODE_ENABLE                  BIT_1
-#define RCV_DATA_BD_IN_MODE_JUMBO_BD_NEEDED         BIT_2
-#define RCV_DATA_BD_IN_MODE_FRAME_TOO_BIG           BIT_3
-#define RCV_DATA_BD_IN_MODE_INVALID_RING_SIZE       BIT_4
-
-	/* Status. */
-	T3_32BIT_REGISTER Status;
-#define RCV_DATA_BD_IN_STATUS_JUMBO_BD_NEEDED       BIT_2
-#define RCV_DATA_BD_IN_STATUS_FRAME_TOO_BIG         BIT_3
-#define RCV_DATA_BD_IN_STATUS_INVALID_RING_SIZE     BIT_4
-
-	/* Split frame minium size. */
-	T3_32BIT_REGISTER SplitFrameMinSize;
-
-	/* Unused space. */
-	LM_UINT8 Unused1[0x2440 - 0x240c];
-
-	/* Receive RCBs. */
-	T3_RCB JumboRcvRcb;
-	T3_RCB StdRcvRcb;
-	T3_RCB MiniRcvRcb;
-
-	/* Receive Data and Receive BD Ring Initiator Local NIC Receive */
-	/* BD Consumber Index. */
-	T3_32BIT_REGISTER NicJumboConIdx;
-	T3_32BIT_REGISTER NicStdConIdx;
-	T3_32BIT_REGISTER NicMiniConIdx;
-
-	/* Unused space. */
-	LM_UINT8 Unused2[4];
-
-	/* Receive Data and Receive BD Initiator Local Receive Return ProdIdx. */
-	T3_32BIT_REGISTER RcvDataBdProdIdx[16];
-
-	/* Receive Data and Receive BD Initiator Hardware Diagnostic. */
-	T3_32BIT_REGISTER HwDiag;
-
-	/* Unused space. */
-	LM_UINT8 Unused3[828];
-} T3_RCV_DATA_BD_INITIATOR, *PT3_RCV_DATA_BD_INITIATOR;
-
-/******************************************************************************/
-/* Receive Data Completion Control Registes. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define RCV_DATA_COMP_MODE_RESET                        BIT_0
-#define RCV_DATA_COMP_MODE_ENABLE                       BIT_1
-#define RCV_DATA_COMP_MODE_ATTN_ENABLE                  BIT_2
-
-	/* Unused spaced. */
-	LM_UINT8 Unused[1020];
-} T3_RCV_DATA_COMPLETION, *PT3_RCV_DATA_COMPLETION;
-
-/******************************************************************************/
-/* Receive BD Initiator Control. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define RCV_BD_IN_MODE_RESET                            BIT_0
-#define RCV_BD_IN_MODE_ENABLE                           BIT_1
-#define RCV_BD_IN_MODE_BD_IN_DIABLED_RCB_ATTN_ENABLE    BIT_2
-
-	T3_32BIT_REGISTER Status;
-#define RCV_BD_IN_STATUS_BD_IN_DIABLED_RCB_ATTN         BIT_2
-
-	T3_32BIT_REGISTER NicJumboRcvProdIdx;
-	T3_32BIT_REGISTER NicStdRcvProdIdx;
-	T3_32BIT_REGISTER NicMiniRcvProdIdx;
-
-	T3_32BIT_REGISTER MiniRcvThreshold;
-	T3_32BIT_REGISTER StdRcvThreshold;
-	T3_32BIT_REGISTER JumboRcvThreshold;
-
-	/* Unused space. */
-	LM_UINT8 Unused[992];
-} T3_RCV_BD_INITIATOR, *PT3_RCV_BD_INITIATOR;
-
-/******************************************************************************/
-/* Receive BD Completion Control Registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define RCV_BD_COMP_MODE_RESET                          BIT_0
-#define RCV_BD_COMP_MODE_ENABLE                         BIT_1
-#define RCV_BD_COMP_MODE_ATTN_ENABLE                    BIT_2
-
-	T3_32BIT_REGISTER Status;
-#define RCV_BD_COMP_STATUS_ERROR_ATTN                   BIT_2
-
-	T3_32BIT_REGISTER NicJumboRcvBdProdIdx;
-	T3_32BIT_REGISTER NicStdRcvBdProdIdx;
-	T3_32BIT_REGISTER NicMiniRcvBdProdIdx;
-
-	/* Unused space. */
-	LM_UINT8 Unused[1004];
-} T3_RCV_BD_COMPLETION, *PT3_RCV_BD_COMPLETION;
-
-/******************************************************************************/
-/* Receive list selector control register. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define RCV_LIST_SEL_MODE_RESET                         BIT_0
-#define RCV_LIST_SEL_MODE_ENABLE                        BIT_1
-#define RCV_LIST_SEL_MODE_ATTN_ENABLE                   BIT_2
-
-	T3_32BIT_REGISTER Status;
-#define RCV_LIST_SEL_STATUS_ERROR_ATTN                  BIT_2
-
-	/* Unused space. */
-	LM_UINT8 Unused[1016];
-} T3_RCV_LIST_SELECTOR, *PT3_RCV_LIST_SELECTOR;
-
-/******************************************************************************/
-/* Mbuf cluster free registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define MBUF_CLUSTER_FREE_MODE_RESET    BIT_0
-#define MBUF_CLUSTER_FREE_MODE_ENABLE   BIT_1
-
-	T3_32BIT_REGISTER Status;
-
-	/* Unused space. */
-	LM_UINT8 Unused[1016];
-} T3_MBUF_CLUSTER_FREE, *PT3_MBUF_CLUSTER_FREE;
-
-/******************************************************************************/
-/* Host coalescing control registers. */
-/******************************************************************************/
-
-typedef struct {
-	/* Mode. */
-	T3_32BIT_REGISTER Mode;
-#define HOST_COALESCE_RESET                         BIT_0
-#define HOST_COALESCE_ENABLE                        BIT_1
-#define HOST_COALESCE_ATTN                          BIT_2
-#define HOST_COALESCE_NOW                           BIT_3
-#define HOST_COALESCE_FULL_STATUS_MODE              BIT_NONE
-#define HOST_COALESCE_64_BYTE_STATUS_MODE           BIT_7
-#define HOST_COALESCE_32_BYTE_STATUS_MODE           BIT_8
-#define HOST_COALESCE_CLEAR_TICKS_ON_RX_BD_EVENT    BIT_9
-#define HOST_COALESCE_CLEAR_TICKS_ON_TX_BD_EVENT    BIT_10
-#define HOST_COALESCE_NO_INT_ON_COALESCE_NOW_MODE   BIT_11
-#define HOST_COALESCE_NO_INT_ON_FORCE_DMAD_MODE     BIT_12
-
-	/* Status. */
-	T3_32BIT_REGISTER Status;
-#define HOST_COALESCE_ERROR_ATTN                    BIT_2
-
-	/* Receive coalescing ticks. */
-	T3_32BIT_REGISTER RxCoalescingTicks;
-
-	/* Send coalescing ticks. */
-	T3_32BIT_REGISTER TxCoalescingTicks;
-
-	/* Receive max coalesced frames. */
-	T3_32BIT_REGISTER RxMaxCoalescedFrames;
-
-	/* Send max coalesced frames. */
-	T3_32BIT_REGISTER TxMaxCoalescedFrames;
-
-	/* Receive coalescing ticks during interrupt. */
-	T3_32BIT_REGISTER RxCoalescedTickDuringInt;
-
-	/* Send coalescing ticks during interrupt. */
-	T3_32BIT_REGISTER TxCoalescedTickDuringInt;
-
-	/* Receive max coalesced frames during interrupt. */
-	T3_32BIT_REGISTER RxMaxCoalescedFramesDuringInt;
-
-	/* Send max coalesced frames during interrupt. */
-	T3_32BIT_REGISTER TxMaxCoalescedFramesDuringInt;
-
-	/* Statistics tick. */
-	T3_32BIT_REGISTER StatsCoalescingTicks;
-
-	/* Unused space. */
-	LM_UINT8 Unused2[4];
-
-	/* Statistics host address. */
-	T3_64BIT_REGISTER StatsBlkHostAddr;
-
-	/* Status block host address. */
-	T3_64BIT_REGISTER StatusBlkHostAddr;
-
-	/* Statistics NIC address. */
-	T3_32BIT_REGISTER StatsBlkNicAddr;
-
-	/* Statust block NIC address. */
-	T3_32BIT_REGISTER StatusBlkNicAddr;
-
-	/* Flow attention registers. */
-	T3_32BIT_REGISTER FlowAttn;
-
-	/* Unused space. */
-	LM_UINT8 Unused3[4];
-
-	T3_32BIT_REGISTER NicJumboRcvBdConIdx;
-	T3_32BIT_REGISTER NicStdRcvBdConIdx;
-	T3_32BIT_REGISTER NicMiniRcvBdConIdx;
-
-	/* Unused space. */
-	LM_UINT8 Unused4[36];
-
-	T3_32BIT_REGISTER NicRetProdIdx[16];
-	T3_32BIT_REGISTER NicSndBdConIdx[16];
-
-	/* Unused space. */
-	LM_UINT8 Unused5[768];
-} T3_HOST_COALESCING, *PT3_HOST_COALESCING;
-
-/******************************************************************************/
-/* Memory arbiter registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define T3_MEM_ARBITER_MODE_RESET       BIT_0
-#define T3_MEM_ARBITER_MODE_ENABLE      BIT_1
-
-	T3_32BIT_REGISTER Status;
-
-	T3_32BIT_REGISTER ArbTrapAddrLow;
-	T3_32BIT_REGISTER ArbTrapAddrHigh;
-
-	/* Unused space. */
-	LM_UINT8 Unused[1008];
-} T3_MEM_ARBITER, *PT3_MEM_ARBITER;
-
-/******************************************************************************/
-/* Buffer manager control register. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define BUFMGR_MODE_RESET                           BIT_0
-#define BUFMGR_MODE_ENABLE                          BIT_1
-#define BUFMGR_MODE_ATTN_ENABLE                     BIT_2
-#define BUFMGR_MODE_BM_TEST                         BIT_3
-#define BUFMGR_MODE_MBUF_LOW_ATTN_ENABLE            BIT_4
-
-	T3_32BIT_REGISTER Status;
-#define BUFMGR_STATUS_ERROR                         BIT_2
-#define BUFMGR_STATUS_MBUF_LOW                      BIT_4
-
-	T3_32BIT_REGISTER MbufPoolAddr;
-	T3_32BIT_REGISTER MbufPoolSize;
-	T3_32BIT_REGISTER MbufReadDmaLowWaterMark;
-	T3_32BIT_REGISTER MbufMacRxLowWaterMark;
-	T3_32BIT_REGISTER MbufHighWaterMark;
-
-	T3_32BIT_REGISTER RxCpuMbufAllocReq;
-#define BUFMGR_MBUF_ALLOC_BIT                     BIT_31
-	T3_32BIT_REGISTER RxCpuMbufAllocResp;
-	T3_32BIT_REGISTER TxCpuMbufAllocReq;
-	T3_32BIT_REGISTER TxCpuMbufAllocResp;
-
-	T3_32BIT_REGISTER DmaDescPoolAddr;
-	T3_32BIT_REGISTER DmaDescPoolSize;
-	T3_32BIT_REGISTER DmaLowWaterMark;
-	T3_32BIT_REGISTER DmaHighWaterMark;
-
-	T3_32BIT_REGISTER RxCpuDmaAllocReq;
-	T3_32BIT_REGISTER RxCpuDmaAllocResp;
-	T3_32BIT_REGISTER TxCpuDmaAllocReq;
-	T3_32BIT_REGISTER TxCpuDmaAllocResp;
-
-	T3_32BIT_REGISTER Hwdiag[3];
-
-	/* Unused space. */
-	LM_UINT8 Unused[936];
-} T3_BUFFER_MANAGER, *PT3_BUFFER_MANAGER;
-
-/******************************************************************************/
-/* Read DMA control registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define DMA_READ_MODE_RESET                         BIT_0
-#define DMA_READ_MODE_ENABLE                        BIT_1
-#define DMA_READ_MODE_TARGET_ABORT_ATTN_ENABLE      BIT_2
-#define DMA_READ_MODE_MASTER_ABORT_ATTN_ENABLE      BIT_3
-#define DMA_READ_MODE_PARITY_ERROR_ATTN_ENABLE      BIT_4
-#define DMA_READ_MODE_ADDR_OVERFLOW_ATTN_ENABLE     BIT_5
-#define DMA_READ_MODE_FIFO_OVERRUN_ATTN_ENABLE      BIT_6
-#define DMA_READ_MODE_FIFO_UNDERRUN_ATTN_ENABLE     BIT_7
-#define DMA_READ_MODE_FIFO_OVERREAD_ATTN_ENABLE     BIT_8
-#define DMA_READ_MODE_LONG_READ_ATTN_ENABLE         BIT_9
-#define DMA_READ_MODE_SPLIT_ENABLE                  BIT_11
-#define DMA_READ_MODE_SPLIT_RESET                   BIT_12
-
-	T3_32BIT_REGISTER Status;
-#define DMA_READ_STATUS_TARGET_ABORT_ATTN           BIT_2
-#define DMA_READ_STATUS_MASTER_ABORT_ATTN           BIT_3
-#define DMA_READ_STATUS_PARITY_ERROR_ATTN           BIT_4
-#define DMA_READ_STATUS_ADDR_OVERFLOW_ATTN          BIT_5
-#define DMA_READ_STATUS_FIFO_OVERRUN_ATTN           BIT_6
-#define DMA_READ_STATUS_FIFO_UNDERRUN_ATTN          BIT_7
-#define DMA_READ_STATUS_FIFO_OVERREAD_ATTN          BIT_8
-#define DMA_READ_STATUS_LONG_READ_ATTN              BIT_9
-
-	/* Unused space. */
-	LM_UINT8 Unused[1016];
-} T3_DMA_READ, *PT3_DMA_READ;
-
-typedef union T3_CPU {
-	struct {
-		T3_32BIT_REGISTER mode;
-#define CPU_MODE_HALT   BIT_10
-#define CPU_MODE_RESET  BIT_0
-		T3_32BIT_REGISTER state;
-		T3_32BIT_REGISTER EventMask;
-		T3_32BIT_REGISTER reserved1[4];
-		T3_32BIT_REGISTER PC;
-		T3_32BIT_REGISTER Instruction;
-		T3_32BIT_REGISTER SpadUnderflow;
-		T3_32BIT_REGISTER WatchdogClear;
-		T3_32BIT_REGISTER WatchdogVector;
-		T3_32BIT_REGISTER WatchdogSavedPC;
-		T3_32BIT_REGISTER HardwareBp;
-		T3_32BIT_REGISTER reserved2[3];
-		T3_32BIT_REGISTER WatchdogSavedState;
-		T3_32BIT_REGISTER LastBrchAddr;
-		T3_32BIT_REGISTER SpadUnderflowSet;
-		T3_32BIT_REGISTER reserved3[(0x200 - 0x50) / 4];
-		T3_32BIT_REGISTER Regs[32];
-		T3_32BIT_REGISTER reserved4[(0x400 - 0x280) / 4];
-	} reg;
-} T3_CPU, *PT3_CPU;
-
-/******************************************************************************/
-/* Write DMA control registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define DMA_WRITE_MODE_RESET                        BIT_0
-#define DMA_WRITE_MODE_ENABLE                       BIT_1
-#define DMA_WRITE_MODE_TARGET_ABORT_ATTN_ENABLE     BIT_2
-#define DMA_WRITE_MODE_MASTER_ABORT_ATTN_ENABLE     BIT_3
-#define DMA_WRITE_MODE_PARITY_ERROR_ATTN_ENABLE     BIT_4
-#define DMA_WRITE_MODE_ADDR_OVERFLOW_ATTN_ENABLE    BIT_5
-#define DMA_WRITE_MODE_FIFO_OVERRUN_ATTN_ENABLE     BIT_6
-#define DMA_WRITE_MODE_FIFO_UNDERRUN_ATTN_ENABLE    BIT_7
-#define DMA_WRITE_MODE_FIFO_OVERREAD_ATTN_ENABLE    BIT_8
-#define DMA_WRITE_MODE_LONG_READ_ATTN_ENABLE        BIT_9
-
-	T3_32BIT_REGISTER Status;
-#define DMA_WRITE_STATUS_TARGET_ABORT_ATTN          BIT_2
-#define DMA_WRITE_STATUS_MASTER_ABORT_ATTN          BIT_3
-#define DMA_WRITE_STATUS_PARITY_ERROR_ATTN          BIT_4
-#define DMA_WRITE_STATUS_ADDR_OVERFLOW_ATTN         BIT_5
-#define DMA_WRITE_STATUS_FIFO_OVERRUN_ATTN          BIT_6
-#define DMA_WRITE_STATUS_FIFO_UNDERRUN_ATTN         BIT_7
-#define DMA_WRITE_STATUS_FIFO_OVERREAD_ATTN         BIT_8
-#define DMA_WRITE_STATUS_LONG_READ_ATTN             BIT_9
-
-	/* Unused space. */
-	LM_UINT8 Unused[1016];
-} T3_DMA_WRITE, *PT3_DMA_WRITE;
-
-/******************************************************************************/
-/* Mailbox registers. */
-/******************************************************************************/
-
-typedef struct {
-	/* Interrupt mailbox registers. */
-	T3_64BIT_REGISTER Interrupt[4];
-
-	/* General mailbox registers. */
-	T3_64BIT_REGISTER General[8];
-
-	/* Reload statistics mailbox. */
-	T3_64BIT_REGISTER ReloadStat;
-
-	/* Receive BD ring producer index registers. */
-	T3_64BIT_REGISTER RcvStdProdIdx;
-	T3_64BIT_REGISTER RcvJumboProdIdx;
-	T3_64BIT_REGISTER RcvMiniProdIdx;
-
-	/* Receive return ring consumer index registers. */
-	T3_64BIT_REGISTER RcvRetConIdx[16];
-
-	/* Send BD ring host producer index registers. */
-	T3_64BIT_REGISTER SendHostProdIdx[16];
-
-	/* Send BD ring nic producer index registers. */
-	T3_64BIT_REGISTER SendNicProdIdx[16];
-} T3_MAILBOX, *PT3_MAILBOX;
-
-typedef struct {
-	T3_MAILBOX Mailbox;
-
-	/* Priority mailbox registers. */
-	T3_32BIT_REGISTER HighPriorityEventVector;
-	T3_32BIT_REGISTER HighPriorityEventMask;
-	T3_32BIT_REGISTER LowPriorityEventVector;
-	T3_32BIT_REGISTER LowPriorityEventMask;
-
-	/* Unused space. */
-	LM_UINT8 Unused[496];
-} T3_GRC_MAILBOX, *PT3_GRC_MAILBOX;
-
-/******************************************************************************/
-/* Flow through queues. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Reset;
-
-	LM_UINT8 Unused[12];
-
-	T3_32BIT_REGISTER DmaNormalReadFtqCtrl;
-	T3_32BIT_REGISTER DmaNormalReadFtqFullCnt;
-	T3_32BIT_REGISTER DmaNormalReadFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER DmaNormalReadFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER DmaHighReadFtqCtrl;
-	T3_32BIT_REGISTER DmaHighReadFtqFullCnt;
-	T3_32BIT_REGISTER DmaHighReadFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER DmaHighReadFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER DmaCompDiscardFtqCtrl;
-	T3_32BIT_REGISTER DmaCompDiscardFtqFullCnt;
-	T3_32BIT_REGISTER DmaCompDiscardFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER DmaCompDiscardFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER SendBdCompFtqCtrl;
-	T3_32BIT_REGISTER SendBdCompFtqFullCnt;
-	T3_32BIT_REGISTER SendBdCompFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER SendBdCompFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER SendDataInitiatorFtqCtrl;
-	T3_32BIT_REGISTER SendDataInitiatorFtqFullCnt;
-	T3_32BIT_REGISTER SendDataInitiatorFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER SendDataInitiatorFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER DmaNormalWriteFtqCtrl;
-	T3_32BIT_REGISTER DmaNormalWriteFtqFullCnt;
-	T3_32BIT_REGISTER DmaNormalWriteFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER DmaNormalWriteFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER DmaHighWriteFtqCtrl;
-	T3_32BIT_REGISTER DmaHighWriteFtqFullCnt;
-	T3_32BIT_REGISTER DmaHighWriteFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER DmaHighWriteFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER SwType1FtqCtrl;
-	T3_32BIT_REGISTER SwType1FtqFullCnt;
-	T3_32BIT_REGISTER SwType1FtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER SwType1FtqFifoWritePeek;
-
-	T3_32BIT_REGISTER SendDataCompFtqCtrl;
-	T3_32BIT_REGISTER SendDataCompFtqFullCnt;
-	T3_32BIT_REGISTER SendDataCompFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER SendDataCompFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER HostCoalesceFtqCtrl;
-	T3_32BIT_REGISTER HostCoalesceFtqFullCnt;
-	T3_32BIT_REGISTER HostCoalesceFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER HostCoalesceFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER MacTxFtqCtrl;
-	T3_32BIT_REGISTER MacTxFtqFullCnt;
-	T3_32BIT_REGISTER MacTxFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER MacTxFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER MbufClustFreeFtqCtrl;
-	T3_32BIT_REGISTER MbufClustFreeFtqFullCnt;
-	T3_32BIT_REGISTER MbufClustFreeFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER MbufClustFreeFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER RcvBdCompFtqCtrl;
-	T3_32BIT_REGISTER RcvBdCompFtqFullCnt;
-	T3_32BIT_REGISTER RcvBdCompFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER RcvBdCompFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER RcvListPlmtFtqCtrl;
-	T3_32BIT_REGISTER RcvListPlmtFtqFullCnt;
-	T3_32BIT_REGISTER RcvListPlmtFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER RcvListPlmtFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER RcvDataBdInitiatorFtqCtrl;
-	T3_32BIT_REGISTER RcvDataBdInitiatorFtqFullCnt;
-	T3_32BIT_REGISTER RcvDataBdInitiatorFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER RcvDataBdInitiatorFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER RcvDataCompFtqCtrl;
-	T3_32BIT_REGISTER RcvDataCompFtqFullCnt;
-	T3_32BIT_REGISTER RcvDataCompFtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER RcvDataCompFtqFifoWritePeek;
-
-	T3_32BIT_REGISTER SwType2FtqCtrl;
-	T3_32BIT_REGISTER SwType2FtqFullCnt;
-	T3_32BIT_REGISTER SwType2FtqFifoEnqueueDequeue;
-	T3_32BIT_REGISTER SwType2FtqFifoWritePeek;
-
-	/* Unused space. */
-	LM_UINT8 Unused2[736];
-} T3_FTQ, *PT3_FTQ;
-
-/******************************************************************************/
-/* Message signaled interrupt registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define MSI_MODE_RESET       BIT_0
-#define MSI_MODE_ENABLE      BIT_1
-	T3_32BIT_REGISTER Status;
-
-	T3_32BIT_REGISTER MsiFifoAccess;
-
-	/* Unused space. */
-	LM_UINT8 Unused[1012];
-} T3_MSG_SIGNALED_INT, *PT3_MSG_SIGNALED_INT;
-
-/******************************************************************************/
-/* DMA Completion registes. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Mode;
-#define DMA_COMP_MODE_RESET                         BIT_0
-#define DMA_COMP_MODE_ENABLE                        BIT_1
-
-	/* Unused space. */
-	LM_UINT8 Unused[1020];
-} T3_DMA_COMPLETION, *PT3_DMA_COMPLETION;
-
-/******************************************************************************/
-/* GRC registers. */
-/******************************************************************************/
-
-typedef struct {
-	/* Mode control register. */
-	T3_32BIT_REGISTER Mode;
-#define GRC_MODE_UPDATE_ON_COALESCING               BIT_0
-#define GRC_MODE_BYTE_SWAP_NON_FRAME_DATA           BIT_1
-#define GRC_MODE_WORD_SWAP_NON_FRAME_DATA           BIT_2
-#define GRC_MODE_BYTE_SWAP_DATA                     BIT_4
-#define GRC_MODE_WORD_SWAP_DATA                     BIT_5
-#define GRC_MODE_SPLIT_HEADER_MODE                  BIT_8
-#define GRC_MODE_NO_FRAME_CRACKING                  BIT_9
-#define GRC_MODE_INCLUDE_CRC                        BIT_10
-#define GRC_MODE_ALLOW_BAD_FRAMES                   BIT_11
-#define GRC_MODE_NO_INTERRUPT_ON_SENDS              BIT_13
-#define GRC_MODE_NO_INTERRUPT_ON_RECEIVE            BIT_14
-#define GRC_MODE_FORCE_32BIT_PCI_BUS_MODE           BIT_15
-#define GRC_MODE_HOST_STACK_UP                      BIT_16
-#define GRC_MODE_HOST_SEND_BDS                      BIT_17
-#define GRC_MODE_TX_NO_PSEUDO_HEADER_CHKSUM         BIT_20
-#define GRC_MODE_RX_NO_PSEUDO_HEADER_CHKSUM         BIT_23
-#define GRC_MODE_INT_ON_TX_CPU_ATTN                 BIT_24
-#define GRC_MODE_INT_ON_RX_CPU_ATTN                 BIT_25
-#define GRC_MODE_INT_ON_MAC_ATTN                    BIT_26
-#define GRC_MODE_INT_ON_DMA_ATTN                    BIT_27
-#define GRC_MODE_INT_ON_FLOW_ATTN                   BIT_28
-#define GRC_MODE_4X_NIC_BASED_SEND_RINGS            BIT_29
-#define GRC_MODE_MULTICAST_FRAME_ENABLE             BIT_30
-
-	/* Misc configuration register. */
-	T3_32BIT_REGISTER MiscCfg;
-#define GRC_MISC_CFG_CORE_CLOCK_RESET               BIT_0
-#define GRC_MISC_PRESCALAR_TIMER_MASK               0xfe
-#define GRC_MISC_BD_ID_MASK                         0x0001e000
-#define GRC_MISC_BD_ID_5700                         0x0001e000
-#define GRC_MISC_BD_ID_5701                         0x00000000
-#define GRC_MISC_BD_ID_5703                         0x00000000
-#define GRC_MISC_BD_ID_5703S                        0x00002000
-#define GRC_MISC_BD_ID_5702FE                       0x00004000
-#define GRC_MISC_BD_ID_5704                         0x00000000
-#define GRC_MISC_BD_ID_5704CIOBE                    0x00004000
-
-	/* Miscellaneous local control register. */
-	T3_32BIT_REGISTER LocalCtrl;
-#define GRC_MISC_LOCAL_CTRL_INT_ACTIVE              BIT_0
-#define GRC_MISC_LOCAL_CTRL_CLEAR_INT               BIT_1
-#define GRC_MISC_LOCAL_CTRL_SET_INT                 BIT_2
-#define GRC_MISC_LOCAL_CTRL_INT_ON_ATTN             BIT_3
-#define GRC_MISC_LOCAL_CTRL_GPIO_INPUT0             BIT_8
-#define GRC_MISC_LOCAL_CTRL_GPIO_INPUT1             BIT_9
-#define GRC_MISC_LOCAL_CTRL_GPIO_INPUT2             BIT_10
-#define GRC_MISC_LOCAL_CTRL_GPIO_OE0                BIT_11
-#define GRC_MISC_LOCAL_CTRL_GPIO_OE1                BIT_12
-#define GRC_MISC_LOCAL_CTRL_GPIO_OE2                BIT_13
-#define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT0            BIT_14
-#define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT1            BIT_15
-#define GRC_MISC_LOCAL_CTRL_GPIO_OUTPUT2            BIT_16
-#define GRC_MISC_LOCAL_CTRL_ENABLE_EXT_MEMORY       BIT_17
-#define GRC_MISC_LOCAL_CTRL_BANK_SELECT             BIT_21
-#define GRC_MISC_LOCAL_CTRL_SSRAM_TYPE              BIT_22
-
-#define GRC_MISC_MEMSIZE_256K     0
-#define GRC_MISC_MEMSIZE_512K     (1 << 18)
-#define GRC_MISC_MEMSIZE_1024K    (2 << 18)
-#define GRC_MISC_MEMSIZE_2048K    (3 << 18)
-#define GRC_MISC_MEMSIZE_4096K    (4 << 18)
-#define GRC_MISC_MEMSIZE_8192K    (5 << 18)
-#define GRC_MISC_MEMSIZE_16M      (6 << 18)
-#define GRC_MISC_LOCAL_CTRL_AUTO_SEEPROM            BIT_24
-
-	T3_32BIT_REGISTER Timer;
-
-	T3_32BIT_REGISTER RxCpuEvent;
-	T3_32BIT_REGISTER RxTimerRef;
-	T3_32BIT_REGISTER RxCpuSemaphore;
-	T3_32BIT_REGISTER RemoteRxCpuAttn;
-
-	T3_32BIT_REGISTER TxCpuEvent;
-	T3_32BIT_REGISTER TxTimerRef;
-	T3_32BIT_REGISTER TxCpuSemaphore;
-	T3_32BIT_REGISTER RemoteTxCpuAttn;
-
-	T3_64BIT_REGISTER MemoryPowerUp;
-
-	T3_32BIT_REGISTER EepromAddr;
-#define SEEPROM_ADDR_WRITE       0
-#define SEEPROM_ADDR_READ        (1 << 31)
-#define SEEPROM_ADDR_RW_MASK     0x80000000
-#define SEEPROM_ADDR_COMPLETE    (1 << 30)
-#define SEEPROM_ADDR_FSM_RESET   (1 << 29)
-#define SEEPROM_ADDR_DEV_ID(x)   (x << 26)
-#define SEEPROM_ADDR_DEV_ID_MASK 0x1c000000
-#define SEEPROM_ADDR_START       (1 << 25)
-#define SEEPROM_ADDR_CLK_PERD(x) (x << 16)
-#define SEEPROM_ADDR_ADDRESS(x)  (x & 0xfffc)
-#define SEEPROM_ADDR_ADDRESS_MASK 0x0000ffff
-
-#define SEEPROM_CLOCK_PERIOD        60
-#define SEEPROM_CHIP_SIZE           (64 * 1024)
-
-	T3_32BIT_REGISTER EepromData;
-	T3_32BIT_REGISTER EepromCtrl;
-
-	T3_32BIT_REGISTER MdiCtrl;
-	T3_32BIT_REGISTER SepromDelay;
-
-	/* Unused space. */
-	LM_UINT8 Unused[948];
-} T3_GRC, *PT3_GRC;
-
-/******************************************************************************/
-/* NVRAM control registers. */
-/******************************************************************************/
-
-typedef struct {
-	T3_32BIT_REGISTER Cmd;
-#define NVRAM_CMD_RESET                             BIT_0
-#define NVRAM_CMD_DONE                              BIT_3
-#define NVRAM_CMD_DO_IT                             BIT_4
-#define NVRAM_CMD_WR                                BIT_5
-#define NVRAM_CMD_RD                                BIT_NONE
-#define NVRAM_CMD_ERASE                             BIT_6
-#define NVRAM_CMD_FIRST                             BIT_7
-#define NVRAM_CMD_LAST                              BIT_8
-
-	T3_32BIT_REGISTER Status;
-	T3_32BIT_REGISTER WriteData;
-
-	T3_32BIT_REGISTER Addr;
-#define NVRAM_ADDRESS_MASK                          0xffffff
-
-	T3_32BIT_REGISTER ReadData;
-
-	/* Flash config 1 register. */
-	T3_32BIT_REGISTER Config1;
-#define FLASH_INTERFACE_ENABLE                      BIT_0
-#define FLASH_SSRAM_BUFFERRED_MODE                  BIT_1
-#define FLASH_PASS_THRU_MODE                        BIT_2
-#define FLASH_BIT_BANG_MODE                         BIT_3
-#define FLASH_COMPAT_BYPASS                         BIT_31
-
-	/* Buffered flash (Atmel: AT45DB011B) specific information */
-#define BUFFERED_FLASH_PAGE_POS         9
-#define BUFFERED_FLASH_BYTE_ADDR_MASK   ((1<<BUFFERED_FLASH_PAGE_POS) - 1)
-#define BUFFERED_FLASH_PAGE_SIZE        264
-#define BUFFERED_FLASH_PHY_PAGE_SIZE    512
-
-	T3_32BIT_REGISTER Config2;
-	T3_32BIT_REGISTER Config3;
-	T3_32BIT_REGISTER SwArb;
-#define SW_ARB_REQ_SET0                             BIT_0
-#define SW_ARB_REQ_SET1                             BIT_1
-#define SW_ARB_REQ_SET2                             BIT_2
-#define SW_ARB_REQ_SET3                             BIT_3
-#define SW_ARB_REQ_CLR0                             BIT_4
-#define SW_ARB_REQ_CLR1                             BIT_5
-#define SW_ARB_REQ_CLR2                             BIT_6
-#define SW_ARB_REQ_CLR3                             BIT_7
-#define SW_ARB_GNT0                                 BIT_8
-#define SW_ARB_GNT1                                 BIT_9
-#define SW_ARB_GNT2                                 BIT_10
-#define SW_ARB_GNT3                                 BIT_11
-#define SW_ARB_REQ0                                 BIT_12
-#define SW_ARB_REQ1                                 BIT_13
-#define SW_ARB_REQ2                                 BIT_14
-#define SW_ARB_REQ3                                 BIT_15
-
-	/* Unused space. */
-	LM_UINT8 Unused[988];
-} T3_NVRAM, *PT3_NVRAM;
-
-/******************************************************************************/
-/* NIC's internal memory. */
-/******************************************************************************/
-
-typedef struct {
-	/* Page zero for the internal CPUs. */
-	LM_UINT8 PageZero[0x100];	/* 0x0000 */
-
-	/* Send RCBs. */
-	T3_RCB SendRcb[16];	/* 0x0100 */
-
-	/* Receive Return RCBs. */
-	T3_RCB RcvRetRcb[16];	/* 0x0200 */
-
-	/* Statistics block. */
-	T3_STATS_BLOCK StatsBlk;	/* 0x0300 */
-
-	/* Status block. */
-	T3_STATUS_BLOCK StatusBlk;	/* 0x0b00 */
-
-	/* Reserved for software. */
-	LM_UINT8 Reserved[1200];	/* 0x0b50 */
-
-	/* Unmapped region. */
-	LM_UINT8 Unmapped[4096];	/* 0x1000 */
-
-	/* DMA descriptors. */
-	LM_UINT8 DmaDesc[8192];	/* 0x2000 */
-
-	/* Buffer descriptors. */
-	LM_UINT8 BufferDesc[16384];	/* 0x4000 */
-} T3_FIRST_32K_SRAM, *PT3_FIRST_32K_SRAM;
-
-/******************************************************************************/
-/* Memory layout. */
-/******************************************************************************/
-
-typedef struct {
-	/* PCI configuration registers. */
-	T3_PCI_CONFIGURATION PciCfg;
-
-	/* Unused. */
-	LM_UINT8 Unused1[0x100];	/* 0x0100 */
-
-	/* Mailbox . */
-	T3_MAILBOX Mailbox;	/* 0x0200 */
-
-	/* MAC control registers. */
-	T3_MAC_CONTROL MacCtrl;	/* 0x0400 */
-
-	/* Send data initiator control registers. */
-	T3_SEND_DATA_INITIATOR SndDataIn;	/* 0x0c00 */
-
-	/* Send data completion Control registers. */
-	T3_SEND_DATA_COMPLETION SndDataComp;	/* 0x1000 */
-
-	/* Send BD ring selector. */
-	T3_SEND_BD_SELECTOR SndBdSel;	/* 0x1400 */
-
-	/* Send BD initiator control registers. */
-	T3_SEND_BD_INITIATOR SndBdIn;	/* 0x1800 */
-
-	/* Send BD completion control registers. */
-	T3_SEND_BD_COMPLETION SndBdComp;	/* 0x1c00 */
-
-	/* Receive list placement control registers. */
-	T3_RCV_LIST_PLACEMENT RcvListPlmt;	/* 0x2000 */
-
-	/* Receive Data and Receive BD Initiator Control. */
-	T3_RCV_DATA_BD_INITIATOR RcvDataBdIn;	/* 0x2400 */
-
-	/* Receive Data Completion Control */
-	T3_RCV_DATA_COMPLETION RcvDataComp;	/* 0x2800 */
-
-	/* Receive BD Initiator Control Registers. */
-	T3_RCV_BD_INITIATOR RcvBdIn;	/* 0x2c00 */
-
-	/* Receive BD Completion Control Registers. */
-	T3_RCV_BD_COMPLETION RcvBdComp;	/* 0x3000 */
-
-	/* Receive list selector control registers. */
-	T3_RCV_LIST_SELECTOR RcvListSel;	/* 0x3400 */
-
-	/* Mbuf cluster free registers. */
-	T3_MBUF_CLUSTER_FREE MbufClusterFree;	/* 0x3800 */
-
-	/* Host coalescing control registers. */
-	T3_HOST_COALESCING HostCoalesce;	/* 0x3c00 */
-
-	/* Memory arbiter control registers. */
-	T3_MEM_ARBITER MemArbiter;	/* 0x4000 */
-
-	/* Buffer manger control registers. */
-	T3_BUFFER_MANAGER BufMgr;	/* 0x4400 */
-
-	/* Read DMA control registers. */
-	T3_DMA_READ DmaRead;	/* 0x4800 */
-
-	/* Write DMA control registers. */
-	T3_DMA_WRITE DmaWrite;	/* 0x4c00 */
-
-	T3_CPU rxCpu;		/* 0x5000 */
-	T3_CPU txCpu;		/* 0x5400 */
-
-	/* Mailboxes. */
-	T3_GRC_MAILBOX GrcMailbox;	/* 0x5800 */
-
-	/* Flow Through queues. */
-	T3_FTQ Ftq;		/* 0x5c00 */
-
-	/* Message signaled interrupt registes. */
-	T3_MSG_SIGNALED_INT Msi;	/* 0x6000 */
-
-	/* DMA completion registers. */
-	T3_DMA_COMPLETION DmaComp;	/* 0x6400 */
-
-	/* GRC registers. */
-	T3_GRC Grc;		/* 0x6800 */
-
-	/* Unused space. */
-	LM_UINT8 Unused2[1024];	/* 0x6c00 */
-
-	/* NVRAM registers. */
-	T3_NVRAM Nvram;		/* 0x7000 */
-
-	/* Unused space. */
-	LM_UINT8 Unused3[3072];	/* 0x7400 */
-
-	/* The 32k memory window into the NIC's */
-	/* internal memory.  The memory window is */
-	/* controlled by the Memory Window Base */
-	/* Address register.  This register is located */
-	/* in the PCI configuration space. */
-	union {			/* 0x8000 */
-		T3_FIRST_32K_SRAM First32k;
-
-		/* Use the memory window base address register to determine the */
-		/* MBUF segment. */
-		LM_UINT32 Mbuf[32768 / 4];
-		LM_UINT32 MemBlock32K[32768 / 4];
-	} uIntMem;
-} T3_STD_MEM_MAP, *PT3_STD_MEM_MAP;
-
-/******************************************************************************/
-/* Adapter info. */
-/******************************************************************************/
-
-typedef struct {
-	LM_UINT16 Svid;
-	LM_UINT16 Ssid;
-	LM_UINT32 PhyId;
-	LM_UINT32 Serdes;	/* 0 = copper PHY, 1 = Serdes */
-} LM_ADAPTER_INFO, *PLM_ADAPTER_INFO;
-
-/******************************************************************************/
-/* Packet queues. */
-/******************************************************************************/
-
-DECLARE_QUEUE_TYPE (LM_RX_PACKET_Q, MAX_RX_PACKET_DESC_COUNT);
-DECLARE_QUEUE_TYPE (LM_TX_PACKET_Q, MAX_TX_PACKET_DESC_COUNT);
-
-/******************************************************************************/
-/* Tx counters. */
-/******************************************************************************/
-
-typedef struct {
-	LM_COUNTER TxPacketGoodCnt;
-	LM_COUNTER TxBytesGoodCnt;
-	LM_COUNTER TxPacketAbortedCnt;
-	LM_COUNTER NoSendBdLeftCnt;
-	LM_COUNTER NoMapRegisterLeftCnt;
-	LM_COUNTER TooManyFragmentsCnt;
-	LM_COUNTER NoTxPacketDescCnt;
-} LM_TX_COUNTERS, *PLM_TX_COUNTERS;
-
-/******************************************************************************/
-/* Rx counters. */
-/******************************************************************************/
-
-typedef struct {
-	LM_COUNTER RxPacketGoodCnt;
-	LM_COUNTER RxBytesGoodCnt;
-	LM_COUNTER RxPacketErrCnt;
-	LM_COUNTER RxErrCrcCnt;
-	LM_COUNTER RxErrCollCnt;
-	LM_COUNTER RxErrLinkLostCnt;
-	LM_COUNTER RxErrPhyDecodeCnt;
-	LM_COUNTER RxErrOddNibbleCnt;
-	LM_COUNTER RxErrMacAbortCnt;
-	LM_COUNTER RxErrShortPacketCnt;
-	LM_COUNTER RxErrNoResourceCnt;
-	LM_COUNTER RxErrLargePacketCnt;
-} LM_RX_COUNTERS, *PLM_RX_COUNTERS;
-
-/******************************************************************************/
-/* Receive producer rings. */
-/******************************************************************************/
-
-typedef enum {
-	T3_UNKNOWN_RCV_PROD_RING = 0,
-	T3_STD_RCV_PROD_RING = 1,
-	T3_MINI_RCV_PROD_RING = 2,
-	T3_JUMBO_RCV_PROD_RING = 3
-} T3_RCV_PROD_RING, *PT3_RCV_PROD_RING;
-
-/******************************************************************************/
-/* Packet descriptor. */
-/******************************************************************************/
-
-#define LM_PACKET_SIGNATURE_TX              0x6861766b
-#define LM_PACKET_SIGNATURE_RX              0x6b766168
-
-typedef struct _LM_PACKET {
-	/* Set in LM. */
-	LM_STATUS PacketStatus;
-
-	/* Set in LM for Rx, in UM for Tx. */
-	LM_UINT32 PacketSize;
-
-	LM_UINT16 Flags;
-
-	LM_UINT16 VlanTag;
-
-	union {
-		/* Send info. */
-		struct {
-			/* Set up by UM. */
-			LM_UINT32 FragCount;
-
-		} Tx;
-
-		/* Receive info. */
-		struct {
-			/* This descriptor belongs to either Std, Mini, or Jumbo ring. */
-			T3_RCV_PROD_RING RcvProdRing;
-
-			/* Receive buffer size */
-			LM_UINT32 RxBufferSize;
-
-			/* Checksum information. */
-			LM_UINT16 IpChecksum;
-			LM_UINT16 TcpUdpChecksum;
-
-		} Rx;
-	} u;
-} LM_PACKET;
-
-/******************************************************************************/
-/* Tigon3 device block. */
-/******************************************************************************/
-
-typedef struct _LM_DEVICE_BLOCK {
-	int index;		/* Device ID */
-	/* Memory view. */
-	PT3_STD_MEM_MAP pMemView;
-
-	/* Base address of the block of memory in which the LM_PACKET descriptors */
-	/* are allocated from. */
-	PLM_VOID pPacketDescBase;
-
-	LM_UINT32 MiscHostCtrl;
-	LM_UINT32 GrcLocalCtrl;
-	LM_UINT32 DmaReadWriteCtrl;
-	LM_UINT32 PciState;
-
-	/* Rx info */
-	LM_UINT32 RxStdDescCnt;
-	LM_UINT32 RxStdQueuedCnt;
-	LM_UINT32 RxStdProdIdx;
-
-	PT3_RCV_BD pRxStdBdVirt;
-	LM_PHYSICAL_ADDRESS RxStdBdPhy;
-
-	LM_UINT32 RxPacketDescCnt;
-	LM_RX_PACKET_Q RxPacketFreeQ;
-	LM_RX_PACKET_Q RxPacketReceivedQ;
-
-	/* Receive info. */
-	PT3_RCV_BD pRcvRetBdVirt;
-	LM_PHYSICAL_ADDRESS RcvRetBdPhy;
-	LM_UINT32 RcvRetConIdx;
-
-#if T3_JUMBO_RCV_RCB_ENTRY_COUNT
-	LM_UINT32 RxJumboDescCnt;
-	LM_UINT32 RxJumboBufferSize;
-	LM_UINT32 RxJumboQueuedCnt;
-
-	LM_UINT32 RxJumboProdIdx;
-
-	PT3_RCV_BD pRxJumboBdVirt;
-	LM_PHYSICAL_ADDRESS RxJumboBdPhy;
-#endif				/* T3_JUMBO_RCV_RCB_ENTRY_COUNT */
-
-	/* These values are used by the upper module to inform the protocol */
-	/* of the maximum transmit/receive packet size. */
-	LM_UINT32 TxMtu;	/* Does not include CRC. */
-	LM_UINT32 RxMtu;	/* Does not include CRC. */
-
-	/* We need to shadow the EMAC, Rx, Tx mode registers.  With B0 silicon, */
-	/* we may have problems reading any MAC registers in 10mb mode. */
-	LM_UINT32 MacMode;
-	LM_UINT32 RxMode;
-	LM_UINT32 TxMode;
-
-	/* MiMode register. */
-	LM_UINT32 MiMode;
-
-	/* Host coalesce mode register. */
-	LM_UINT32 CoalesceMode;
-
-	/* Send info. */
-	LM_UINT32 TxPacketDescCnt;
-
-	/* Tx info. */
-	LM_TX_PACKET_Q TxPacketFreeQ;
-	LM_TX_PACKET_Q TxPacketActiveQ;
-	LM_TX_PACKET_Q TxPacketXmittedQ;
-
-	/* Pointers to SendBd. */
-	PT3_SND_BD pSendBdVirt;
-	LM_PHYSICAL_ADDRESS SendBdPhy;	/* Only valid for Host based Send BD. */
-
-	/* Send producer and consumer indices. */
-	LM_UINT32 SendProdIdx;
-	LM_UINT32 SendConIdx;
-
-	/* Number of BD left. */
-	atomic_t SendBdLeft;
-
-	T3_SND_BD ShadowSendBd[T3_SEND_RCB_ENTRY_COUNT];
-
-	/* Counters. */
-	LM_RX_COUNTERS RxCounters;
-	LM_TX_COUNTERS TxCounters;
-
-	/* Host coalescing parameters. */
-	LM_UINT32 RxCoalescingTicks;
-	LM_UINT32 TxCoalescingTicks;
-	LM_UINT32 RxMaxCoalescedFrames;
-	LM_UINT32 TxMaxCoalescedFrames;
-	LM_UINT32 StatsCoalescingTicks;
-	LM_UINT32 RxCoalescingTicksDuringInt;
-	LM_UINT32 TxCoalescingTicksDuringInt;
-	LM_UINT32 RxMaxCoalescedFramesDuringInt;
-	LM_UINT32 TxMaxCoalescedFramesDuringInt;
-
-	/* DMA water marks. */
-	LM_UINT32 DmaMbufLowMark;
-	LM_UINT32 RxMacMbufLowMark;
-	LM_UINT32 MbufHighMark;
-
-	/* Status block. */
-	PT3_STATUS_BLOCK pStatusBlkVirt;
-	LM_PHYSICAL_ADDRESS StatusBlkPhy;
-
-	/* Statistics block. */
-	PT3_STATS_BLOCK pStatsBlkVirt;
-	LM_PHYSICAL_ADDRESS StatsBlkPhy;
-
-	/* Current receive mask. */
-	LM_UINT32 ReceiveMask;
-
-	/* Task offload capabilities. */
-	LM_TASK_OFFLOAD TaskOffloadCap;
-
-	/* Task offload selected. */
-	LM_TASK_OFFLOAD TaskToOffload;
-
-	/* Wake up capability. */
-	LM_WAKE_UP_MODE WakeUpModeCap;
-
-	/* Wake up capability. */
-	LM_WAKE_UP_MODE WakeUpMode;
-
-	/* Flow control. */
-	LM_FLOW_CONTROL FlowControlCap;
-	LM_FLOW_CONTROL FlowControl;
-
-	/* Enable or disable PCI MWI. */
-	LM_UINT32 EnableMWI;
-
-	/* Enable 5701 tagged status mode. */
-	LM_UINT32 UseTaggedStatus;
-
-	/* NIC will not compute the pseudo header checksum.  The driver or OS */
-	/* must seed the checksum field with the pseudo checksum. */
-	LM_UINT32 NoTxPseudoHdrChksum;
-
-	/* The receive checksum in the BD does not include the pseudo checksum. */
-	/* The OS or the driver must calculate the pseudo checksum and add it to */
-	/* the checksum in the BD. */
-	LM_UINT32 NoRxPseudoHdrChksum;
-
-	/* Current node address. */
-	LM_UINT8 NodeAddress[8];
-
-	/* The adapter's node address. */
-	LM_UINT8 PermanentNodeAddress[8];
-
-	/* Adapter info. */
-	LM_UINT16 BusNum;
-	LM_UINT8 DevNum;
-	LM_UINT8 FunctNum;
-	LM_UINT16 PciVendorId;
-	LM_UINT16 PciDeviceId;
-	LM_UINT32 BondId;
-	LM_UINT8 Irq;
-	LM_UINT8 IntPin;
-	LM_UINT8 CacheLineSize;
-	LM_UINT8 PciRevId;
-#if PCIX_TARGET_WORKAROUND
-	LM_UINT32 EnablePciXFix;
-#endif
-	LM_UINT32 UndiFix;	/* new, jimmy */
-	LM_UINT32 PciCommandStatusWords;
-	LM_UINT32 ChipRevId;
-	LM_UINT16 SubsystemVendorId;
-	LM_UINT16 SubsystemId;
-#if 0				/* Jimmy, deleted in new driver */
-	LM_UINT32 MemBaseLow;
-	LM_UINT32 MemBaseHigh;
-	LM_UINT32 MemBaseSize;
-#endif
-	PLM_UINT8 pMappedMemBase;
-
-	/* Saved PCI configuration registers for restoring after a reset. */
-	LM_UINT32 SavedCacheLineReg;
-
-	/* Phy info. */
-	LM_UINT32 PhyAddr;
-	LM_UINT32 PhyId;
-
-	/* Requested phy settings. */
-	LM_REQUESTED_MEDIA_TYPE RequestedMediaType;
-
-	/* Disable auto-negotiation. */
-	LM_UINT32 DisableAutoNeg;
-
-	/* Ways for the MAC to get link change interrupt. */
-	LM_UINT32 PhyIntMode;
-#define T3_PHY_INT_MODE_AUTO                        0
-#define T3_PHY_INT_MODE_MI_INTERRUPT                1
-#define T3_PHY_INT_MODE_LINK_READY                  2
-#define T3_PHY_INT_MODE_AUTO_POLLING                3
-
-	/* Ways to determine link change status. */
-	LM_UINT32 LinkChngMode;
-#define T3_LINK_CHNG_MODE_AUTO                      0
-#define T3_LINK_CHNG_MODE_USE_STATUS_REG            1
-#define T3_LINK_CHNG_MODE_USE_STATUS_BLOCK          2
-
-	/* LED mode. */
-	LM_UINT32 LedMode;
-
-#define LED_MODE_AUTO                               0
-
-	/* 5700/01 LED mode. */
-#define LED_MODE_THREE_LINK                         1
-#define LED_MODE_LINK10                             2
-
-	/* 5703/02/04 LED mode. */
-#define LED_MODE_OPEN_DRAIN                         1
-#define LED_MODE_OUTPUT                             2
-
-	/* WOL Speed */
-	LM_UINT32 WolSpeed;
-#define WOL_SPEED_10MB                              1
-#define WOL_SPEED_100MB                             2
-
-	/* Reset the PHY on initialization. */
-	LM_UINT32 ResetPhyOnInit;
-
-	LM_UINT32 RestoreOnWakeUp;
-	LM_REQUESTED_MEDIA_TYPE WakeUpRequestedMediaType;
-	LM_UINT32 WakeUpDisableAutoNeg;
-
-	/* Current phy settings. */
-	LM_MEDIA_TYPE MediaType;
-	LM_LINE_SPEED LineSpeed;
-	LM_LINE_SPEED OldLineSpeed;
-	LM_DUPLEX_MODE DuplexMode;
-	LM_STATUS LinkStatus;
-	LM_UINT32 advertising;	/* Jimmy, new! */
-	LM_UINT32 advertising1000;	/* Jimmy, new! */
-
-	/* Multicast address list. */
-	LM_UINT32 McEntryCount;
-	LM_UINT8 McTable[LM_MAX_MC_TABLE_SIZE][LM_MC_ENTRY_SIZE];
-
-	/* Use NIC or Host based send BD. */
-	LM_UINT32 NicSendBd;
-
-	/* Athlon fix. */
-	LM_UINT32 DelayPciGrant;
-
-	/* Enable OneDmaAtOnce */
-	LM_UINT32 OneDmaAtOnce;
-
-	/* Split Mode flags, Jimmy new */
-	LM_UINT32 SplitModeEnable;
-	LM_UINT32 SplitModeMaxReq;
-
-	/* Init flag. */
-	LM_BOOL InitDone;
-
-	/* Shutdown flag.  Set by the upper module. */
-	LM_BOOL ShuttingDown;
-
-	/* Flag to determine whether to call LM_QueueRxPackets or not in */
-	/* LM_ResetAdapter routine. */
-	LM_BOOL QueueRxPackets;
-
-	LM_UINT32 MbufBase;
-	LM_UINT32 MbufSize;
-
-	/* TRUE if we have a SERDES PHY. */
-	LM_UINT32 EnableTbi;
-
-	/* Ethernet@WireSpeed. */
-	LM_UINT32 EnableWireSpeed;
-
-	LM_UINT32 EepromWp;
-
-#if INCLUDE_TBI_SUPPORT
-	/* Autoneg state info. */
-	AN_STATE_INFO AnInfo;
-	LM_UINT32 PollTbiLink;
-	LM_UINT32 IgnoreTbiLinkChange;
-#endif
-	char PartNo[24];
-	char BootCodeVer[16];
-	char BusSpeedStr[24];	/* Jimmy, new! */
-	LM_UINT32 PhyCrcCount;
-} LM_DEVICE_BLOCK;
-
-#define T3_REG_CPU_VIEW               0xc0000000
-
-#define T3_BLOCK_DMA_RD               (1 << 0)
-#define T3_BLOCK_DMA_COMP             (1 << 1)
-#define T3_BLOCK_RX_BD_INITIATOR      (1 << 2)
-#define T3_BLOCK_RX_BD_COMP           (1 << 3)
-#define T3_BLOCK_DMA_WR               (1 << 4)
-#define T3_BLOCK_MSI_HANDLER          (1 << 5)
-#define T3_BLOCK_RX_LIST_PLMT         (1 << 6)
-#define T3_BLOCK_RX_LIST_SELECTOR     (1 << 7)
-#define T3_BLOCK_RX_DATA_INITIATOR    (1 << 8)
-#define T3_BLOCK_RX_DATA_COMP         (1 << 9)
-#define T3_BLOCK_HOST_COALESING       (1 << 10)
-#define T3_BLOCK_MAC_RX_ENGINE        (1 << 11)
-#define T3_BLOCK_MBUF_CLUSTER_FREE    (1 << 12)
-#define T3_BLOCK_SEND_BD_INITIATOR    (1 << 13)
-#define T3_BLOCK_SEND_BD_COMP         (1 << 14)
-#define T3_BLOCK_SEND_BD_SELECTOR     (1 << 15)
-#define T3_BLOCK_SEND_DATA_INITIATOR  (1 << 16)
-#define T3_BLOCK_SEND_DATA_COMP       (1 << 17)
-#define T3_BLOCK_MAC_TX_ENGINE        (1 << 18)
-#define T3_BLOCK_MEM_ARBITOR          (1 << 19)
-#define T3_BLOCK_MBUF_MANAGER         (1 << 20)
-#define T3_BLOCK_MAC_GLOBAL           (1 << 21)
-
-#define LM_ENABLE               1
-#define LM_DISABLE              2
-
-#define RX_CPU_EVT_SW0              0
-#define RX_CPU_EVT_SW1              1
-#define RX_CPU_EVT_RLP              2
-#define RX_CPU_EVT_SW3              3
-#define RX_CPU_EVT_RLS              4
-#define RX_CPU_EVT_SW4              5
-#define RX_CPU_EVT_RX_BD_COMP       6
-#define RX_CPU_EVT_SW5              7
-#define RX_CPU_EVT_RDI              8
-#define RX_CPU_EVT_DMA_WR           9
-#define RX_CPU_EVT_DMA_RD           10
-#define RX_CPU_EVT_SWQ              11
-#define RX_CPU_EVT_SW6              12
-#define RX_CPU_EVT_RDC              13
-#define RX_CPU_EVT_SW7              14
-#define RX_CPU_EVT_HOST_COALES      15
-#define RX_CPU_EVT_SW8              16
-#define RX_CPU_EVT_HIGH_DMA_WR      17
-#define RX_CPU_EVT_HIGH_DMA_RD      18
-#define RX_CPU_EVT_SW9              19
-#define RX_CPU_EVT_DMA_ATTN         20
-#define RX_CPU_EVT_LOW_P_MBOX       21
-#define RX_CPU_EVT_HIGH_P_MBOX      22
-#define RX_CPU_EVT_SW10             23
-#define RX_CPU_EVT_TX_CPU_ATTN      24
-#define RX_CPU_EVT_MAC_ATTN         25
-#define RX_CPU_EVT_RX_CPU_ATTN      26
-#define RX_CPU_EVT_FLOW_ATTN        27
-#define RX_CPU_EVT_SW11             28
-#define RX_CPU_EVT_TIMER            29
-#define RX_CPU_EVT_SW12             30
-#define RX_CPU_EVT_SW13             31
-
-/* RX-CPU event */
-#define RX_CPU_EVENT_SW_EVENT0      (1 << RX_CPU_EVT_SW0)
-#define RX_CPU_EVENT_SW_EVENT1      (1 << RX_CPU_EVT_SW1)
-#define RX_CPU_EVENT_RLP            (1 << RX_CPU_EVT_RLP)
-#define RX_CPU_EVENT_SW_EVENT3      (1 << RX_CPU_EVT_SW3)
-#define RX_CPU_EVENT_RLS            (1 << RX_CPU_EVT_RLS)
-#define RX_CPU_EVENT_SW_EVENT4      (1 << RX_CPU_EVT_SW4)
-#define RX_CPU_EVENT_RX_BD_COMP     (1 << RX_CPU_EVT_RX_BD_COMP)
-#define RX_CPU_EVENT_SW_EVENT5      (1 << RX_CPU_EVT_SW5)
-#define RX_CPU_EVENT_RDI            (1 << RX_CPU_EVT_RDI)
-#define RX_CPU_EVENT_DMA_WR         (1 << RX_CPU_EVT_DMA_WR)
-#define RX_CPU_EVENT_DMA_RD         (1 << RX_CPU_EVT_DMA_RD)
-#define RX_CPU_EVENT_SWQ            (1 << RX_CPU_EVT_SWQ)
-#define RX_CPU_EVENT_SW_EVENT6      (1 << RX_CPU_EVT_SW6)
-#define RX_CPU_EVENT_RDC            (1 << RX_CPU_EVT_RDC)
-#define RX_CPU_EVENT_SW_EVENT7      (1 << RX_CPU_EVT_SW7)
-#define RX_CPU_EVENT_HOST_COALES    (1 << RX_CPU_EVT_HOST_COALES)
-#define RX_CPU_EVENT_SW_EVENT8      (1 << RX_CPU_EVT_SW8)
-#define RX_CPU_EVENT_HIGH_DMA_WR    (1 << RX_CPU_EVT_HIGH_DMA_WR)
-#define RX_CPU_EVENT_HIGH_DMA_RD    (1 << RX_CPU_EVT_HIGH_DMA_RD)
-#define RX_CPU_EVENT_SW_EVENT9      (1 << RX_CPU_EVT_SW9)
-#define RX_CPU_EVENT_DMA_ATTN       (1 << RX_CPU_EVT_DMA_ATTN)
-#define RX_CPU_EVENT_LOW_P_MBOX     (1 << RX_CPU_EVT_LOW_P_MBOX)
-#define RX_CPU_EVENT_HIGH_P_MBOX    (1 << RX_CPU_EVT_HIGH_P_MBOX)
-#define RX_CPU_EVENT_SW_EVENT10     (1 << RX_CPU_EVT_SW10)
-#define RX_CPU_EVENT_TX_CPU_ATTN    (1 << RX_CPU_EVT_TX_CPU_ATTN)
-#define RX_CPU_EVENT_MAC_ATTN       (1 << RX_CPU_EVT_MAC_ATTN)
-#define RX_CPU_EVENT_RX_CPU_ATTN    (1 << RX_CPU_EVT_RX_CPU_ATTN)
-#define RX_CPU_EVENT_FLOW_ATTN      (1 << RX_CPU_EVT_FLOW_ATTN)
-#define RX_CPU_EVENT_SW_EVENT11     (1 << RX_CPU_EVT_SW11)
-#define RX_CPU_EVENT_TIMER          (1 << RX_CPU_EVT_TIMER)
-#define RX_CPU_EVENT_SW_EVENT12     (1 << RX_CPU_EVT_SW12)
-#define RX_CPU_EVENT_SW_EVENT13     (1 << RX_CPU_EVT_SW13)
-
-#define RX_CPU_MASK (RX_CPU_EVENT_SW_EVENT0 | \
-		     RX_CPU_EVENT_RLP | \
-		     RX_CPU_EVENT_RDI | \
-		     RX_CPU_EVENT_RDC)
-
-#define TX_CPU_EVT_SW0              0
-#define TX_CPU_EVT_SW1              1
-#define TX_CPU_EVT_SW2              2
-#define TX_CPU_EVT_SW3              3
-#define TX_CPU_EVT_TX_MAC           4
-#define TX_CPU_EVT_SW4              5
-#define TX_CPU_EVT_SBDC             6
-#define TX_CPU_EVT_SW5              7
-#define TX_CPU_EVT_SDI              8
-#define TX_CPU_EVT_DMA_WR           9
-#define TX_CPU_EVT_DMA_RD           10
-#define TX_CPU_EVT_SWQ              11
-#define TX_CPU_EVT_SW6              12
-#define TX_CPU_EVT_SDC              13
-#define TX_CPU_EVT_SW7              14
-#define TX_CPU_EVT_HOST_COALES      15
-#define TX_CPU_EVT_SW8              16
-#define TX_CPU_EVT_HIGH_DMA_WR      17
-#define TX_CPU_EVT_HIGH_DMA_RD      18
-#define TX_CPU_EVT_SW9              19
-#define TX_CPU_EVT_DMA_ATTN         20
-#define TX_CPU_EVT_LOW_P_MBOX       21
-#define TX_CPU_EVT_HIGH_P_MBOX      22
-#define TX_CPU_EVT_SW10             23
-#define TX_CPU_EVT_RX_CPU_ATTN      24
-#define TX_CPU_EVT_MAC_ATTN         25
-#define TX_CPU_EVT_TX_CPU_ATTN      26
-#define TX_CPU_EVT_FLOW_ATTN        27
-#define TX_CPU_EVT_SW11             28
-#define TX_CPU_EVT_TIMER            29
-#define TX_CPU_EVT_SW12             30
-#define TX_CPU_EVT_SW13             31
-
-/* TX-CPU event */
-#define TX_CPU_EVENT_SW_EVENT0      (1 << TX_CPU_EVT_SW0)
-#define TX_CPU_EVENT_SW_EVENT1      (1 << TX_CPU_EVT_SW1)
-#define TX_CPU_EVENT_SW_EVENT2      (1 << TX_CPU_EVT_SW2)
-#define TX_CPU_EVENT_SW_EVENT3      (1 << TX_CPU_EVT_SW3)
-#define TX_CPU_EVENT_TX_MAC         (1 << TX_CPU_EVT_TX_MAC)
-#define TX_CPU_EVENT_SW_EVENT4      (1 << TX_CPU_EVT_SW4)
-#define TX_CPU_EVENT_SBDC           (1 << TX_CPU_EVT_SBDC)
-#define TX_CPU_EVENT_SW_EVENT5      (1 << TX_CPU_EVT_SW5)
-#define TX_CPU_EVENT_SDI            (1 << TX_CPU_EVT_SDI)
-#define TX_CPU_EVENT_DMA_WR         (1 << TX_CPU_EVT_DMA_WR)
-#define TX_CPU_EVENT_DMA_RD         (1 << TX_CPU_EVT_DMA_RD)
-#define TX_CPU_EVENT_SWQ            (1 << TX_CPU_EVT_SWQ)
-#define TX_CPU_EVENT_SW_EVENT6      (1 << TX_CPU_EVT_SW6)
-#define TX_CPU_EVENT_SDC            (1 << TX_CPU_EVT_SDC)
-#define TX_CPU_EVENT_SW_EVENT7      (1 << TX_CPU_EVT_SW7)
-#define TX_CPU_EVENT_HOST_COALES    (1 << TX_CPU_EVT_HOST_COALES)
-#define TX_CPU_EVENT_SW_EVENT8      (1 << TX_CPU_EVT_SW8)
-#define TX_CPU_EVENT_HIGH_DMA_WR    (1 << TX_CPU_EVT_HIGH_DMA_WR)
-#define TX_CPU_EVENT_HIGH_DMA_RD    (1 << TX_CPU_EVT_HIGH_DMA_RD)
-#define TX_CPU_EVENT_SW_EVENT9      (1 << TX_CPU_EVT_SW9)
-#define TX_CPU_EVENT_DMA_ATTN       (1 << TX_CPU_EVT_DMA_ATTN)
-#define TX_CPU_EVENT_LOW_P_MBOX     (1 << TX_CPU_EVT_LOW_P_MBOX)
-#define TX_CPU_EVENT_HIGH_P_MBOX    (1 << TX_CPU_EVT_HIGH_P_MBOX)
-#define TX_CPU_EVENT_SW_EVENT10     (1 << TX_CPU_EVT_SW10)
-#define TX_CPU_EVENT_RX_CPU_ATTN    (1 << TX_CPU_EVT_RX_CPU_ATTN)
-#define TX_CPU_EVENT_MAC_ATTN       (1 << TX_CPU_EVT_MAC_ATTN)
-#define TX_CPU_EVENT_TX_CPU_ATTN    (1 << TX_CPU_EVT_TX_CPU_ATTN)
-#define TX_CPU_EVENT_FLOW_ATTN      (1 << TX_CPU_EVT_FLOW_ATTN)
-#define TX_CPU_EVENT_SW_EVENT11     (1 << TX_CPU_EVT_SW11)
-#define TX_CPU_EVENT_TIMER          (1 << TX_CPU_EVT_TIMER)
-#define TX_CPU_EVENT_SW_EVENT12     (1 << TX_CPU_EVT_SW12)
-#define TX_CPU_EVENT_SW_EVENT13     (1 << TX_CPU_EVT_SW13)
-
-#define TX_CPU_MASK (TX_CPU_EVENT_SW_EVENT0 | \
-		     TX_CPU_EVENT_SDI  | \
-		     TX_CPU_EVENT_SDC)
-
-#define T3_FTQ_TYPE1_UNDERFLOW_BIT   (1 << 29)
-#define T3_FTQ_TYPE1_PASS_BIT        (1 << 30)
-#define T3_FTQ_TYPE1_SKIP_BIT        (1 << 31)
-
-#define T3_FTQ_TYPE2_UNDERFLOW_BIT   (1 << 13)
-#define T3_FTQ_TYPE2_PASS_BIT        (1 << 14)
-#define T3_FTQ_TYPE2_SKIP_BIT        (1 << 15)
-
-#define T3_QID_DMA_READ               1
-#define T3_QID_DMA_HIGH_PRI_READ      2
-#define T3_QID_DMA_COMP_DX            3
-#define T3_QID_SEND_BD_COMP           4
-#define T3_QID_SEND_DATA_INITIATOR    5
-#define T3_QID_DMA_WRITE              6
-#define T3_QID_DMA_HIGH_PRI_WRITE     7
-#define T3_QID_SW_TYPE_1              8
-#define T3_QID_SEND_DATA_COMP         9
-#define T3_QID_HOST_COALESCING        10
-#define T3_QID_MAC_TX                 11
-#define T3_QID_MBUF_CLUSTER_FREE      12
-#define T3_QID_RX_BD_COMP             13
-#define T3_QID_RX_LIST_PLM            14
-#define T3_QID_RX_DATA_BD_INITIATOR   15
-#define T3_QID_RX_DATA_COMP           16
-#define T3_QID_SW_TYPE2               17
-
-LM_STATUS LM_LoadFirmware (PLM_DEVICE_BLOCK pDevice,
-			   PT3_FWIMG_INFO pFwImg,
-			   LM_UINT32 LoadCpu, LM_UINT32 StartCpu);
-
-/******************************************************************************/
-/* NIC register read/write macros. */
-/******************************************************************************/
-
-#if 0				/* Jimmy */
-/* MAC register access. */
-LM_UINT32 LM_RegRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register);
-LM_VOID LM_RegWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register,
-		     LM_UINT32 Value32);
-
-/* MAC memory access. */
-LM_UINT32 LM_MemRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr);
-LM_VOID LM_MemWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr,
-		     LM_UINT32 Value32);
-
-#if PCIX_TARGET_WORKAROUND
-
-/* use memory-mapped accesses for mailboxes and reads, UNDI accesses
-   for writes to all other registers */
-#define REG_RD(pDevice, OffsetName)                              \
-    readl(&((pDevice)->pMemView->OffsetName))
-
-#define REG_WR(pDevice, OffsetName, Value32)                     \
-    (((OFFSETOF(T3_STD_MEM_MAP, OffsetName) >=0x200 ) &&         \
-      (OFFSETOF(T3_STD_MEM_MAP, OffsetName) <0x400)) ||	         \
-	 ((pDevice)->EnablePciXFix == FALSE)) ?                  \
-    (void) writel(Value32, &((pDevice)->pMemView->OffsetName)) : \
-    LM_RegWrInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName), Value32)
-
-#define MB_REG_RD(pDevice, OffsetName)                           \
-    readl(&((pDevice)->pMemView->OffsetName))
-
-#define MB_REG_WR(pDevice, OffsetName, Value32)                  \
-    writel(Value32, &((pDevice)->pMemView->OffsetName))
-
-#define REG_RD_OFFSET(pDevice, Offset)                           \
-    readl(&((LM_UINT8 *) (pDevice)->pMemView + Offset))
-
-#define REG_WR_OFFSET(pDevice, Offset, Value32)                  \
-	(((Offset >=0x200 ) && (Offset < 0x400)) ||		 \
-	 ((pDevice)->EnablePciXFix == FALSE)) ?			 \
-    (void) writel(Value32, ((LM_UINT8 *) (pDevice)->pMemView + Offset)) : \
-    LM_RegWrInd(pDevice, Offset, Value32)
-
-#define MEM_RD(pDevice, AddrName)                                \
-    LM_MemRdInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName))
-#define MEM_WR(pDevice, AddrName, Value32)                       \
-    LM_MemWrInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName), Value32)
-
-#define MEM_RD_OFFSET(pDevice, Offset)                           \
-    LM_MemRdInd(pDevice, Offset)
-#define MEM_WR_OFFSET(pDevice, Offset, Value32)                  \
-    LM_MemWrInd(pDevice, Offset, Value32)
-
-#else				/* normal target access path below */
-
-/* Register access. */
-#define REG_RD(pDevice, OffsetName)                                         \
-    readl(&((pDevice)->pMemView->OffsetName))
-#define REG_WR(pDevice, OffsetName, Value32)                                \
-    writel(Value32, &((pDevice)->pMemView->OffsetName))
-
-#define REG_RD_OFFSET(pDevice, Offset)                                      \
-    readl(((LM_UINT8 *) (pDevice)->pMemView + Offset))
-#define REG_WR_OFFSET(pDevice, Offset, Value32)                             \
-    writel(Value32, ((LM_UINT8 *) (pDevice)->pMemView + Offset))
-
-/* There could be problem access the memory window directly.  For now, */
-/* we have to go through the PCI configuration register. */
-#define MEM_RD(pDevice, AddrName)                                           \
-    LM_MemRdInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName))
-#define MEM_WR(pDevice, AddrName, Value32)                                  \
-    LM_MemWrInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName), Value32)
-
-#define MEM_RD_OFFSET(pDevice, Offset)                                      \
-    LM_MemRdInd(pDevice, Offset)
-#define MEM_WR_OFFSET(pDevice, Offset, Value32)                             \
-    LM_MemWrInd(pDevice, Offset, Value32)
-
-#endif				/* PCIX_TARGET_WORKAROUND */
-
-#endif				/* Jimmy, merging */
-
-  /* Jimmy...rest of file is new stuff! */
-/******************************************************************************/
-/* NIC register read/write macros. */
-/******************************************************************************/
-
-/* MAC register access. */
-LM_UINT32 LM_RegRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register);
-LM_VOID LM_RegWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 Register,
-		     LM_UINT32 Value32);
-
-/* MAC memory access. */
-LM_UINT32 LM_MemRdInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr);
-LM_VOID LM_MemWrInd (PLM_DEVICE_BLOCK pDevice, LM_UINT32 MemAddr,
-		     LM_UINT32 Value32);
-
-#define MB_REG_WR(pDevice, OffsetName, Value32)                               \
-    ((pDevice)->UndiFix) ?                                                    \
-	LM_RegWrInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)+0x5600,     \
-	    Value32) :                                                        \
-	(void) __raw_writel(Value32, &((pDevice)->pMemView->OffsetName))
-
-#define MB_REG_RD(pDevice, OffsetName)                                        \
-    (((pDevice)->UndiFix) ?                                                   \
-	LM_RegRdInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)+0x5600) :   \
-	__raw_readl(&((pDevice)->pMemView->OffsetName)))
-
-#define REG_RD(pDevice, OffsetName)                                           \
-    (((pDevice)->UndiFix) ?                                                   \
-	LM_RegRdInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName)) :          \
-	__raw_readl(&((pDevice)->pMemView->OffsetName)))
-
-#if PCIX_TARGET_WORKAROUND
-
-#define REG_WR(pDevice, OffsetName, Value32)                                \
-	 ((pDevice)->EnablePciXFix == FALSE) ?                              \
-    (void) __raw_writel(Value32, &((pDevice)->pMemView->OffsetName)) :      \
-    LM_RegWrInd(pDevice, OFFSETOF(T3_STD_MEM_MAP, OffsetName), Value32)
-
-#else
-
-#define REG_WR(pDevice, OffsetName, Value32)                                \
-    __raw_writel(Value32, &((pDevice)->pMemView->OffsetName))
-
-#endif
-
-#define MEM_RD(pDevice, AddrName)                                           \
-    LM_MemRdInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName))
-#define MEM_WR(pDevice, AddrName, Value32)                                  \
-    LM_MemWrInd(pDevice, OFFSETOF(T3_FIRST_32K_SRAM, AddrName), Value32)
-
-#define MEM_RD_OFFSET(pDevice, Offset)                                      \
-    LM_MemRdInd(pDevice, Offset)
-#define MEM_WR_OFFSET(pDevice, Offset, Value32)                             \
-    LM_MemWrInd(pDevice, Offset, Value32)
-
-#endif				/* TIGON3_H */
diff --git a/include/configs/BMW.h b/include/configs/BMW.h
index 8398b29..e1951eb 100644
--- a/include/configs/BMW.h
+++ b/include/configs/BMW.h
@@ -49,9 +49,6 @@
 
 #define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()			*/
 
-#define CONFIG_BCM570x		1	/* Use Broadcom BCM570x Ethernet Driver */
-#define	CONFIG_TIGON3		1
-
 #define CONFIG_CONS_INDEX	1
 #define CONFIG_BAUDRATE		9600
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
@@ -84,6 +81,8 @@
 
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_ELF
+#undef CONFIG_CMD_NET
+#undef CONFIG_CMD_NFS
 
 
 #if 0