nios: remove nios-32 arch
The nios-32 arch is obsolete and broken. So it is removed.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
diff --git a/MAINTAINERS b/MAINTAINERS
index 5cbc845..7a13d28 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -842,22 +842,6 @@
vct_xxx MIPS32 4Kc
#########################################################################
-# Nios-32 Systems: #
-# #
-# Maintainer Name, Email Address #
-# Board CPU #
-#########################################################################
-
-Stephan Linz <linz@li-pro.net>
-
- DK1S10 Nios-32
- ADNPESC1 Nios-32
-
-Scott McNutt <smcnutt@psyent.com>
-
- DK1C20 Nios-32
-
-#########################################################################
# Nios-II Systems: #
# #
# Maintainer Name, Email Address #
diff --git a/MAKEALL b/MAKEALL
index bb09627..2527352 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -811,21 +811,6 @@
"
#########################################################################
-## NIOS Systems
-#########################################################################
-
-LIST_nios=" \
- ADNPESC1 \
- ADNPESC1_base_32 \
- ADNPESC1_DNPEVA2_base_32\
- DK1C20 \
- DK1C20_standard_32 \
- DK1S10 \
- DK1S10_standard_32 \
- DK1S10_mtx_ldk_20 \
-"
-
-#########################################################################
## Nios-II Systems
#########################################################################
@@ -1017,7 +1002,7 @@
|coldfire \
|microblaze \
|mips|mips_el \
- |nios|nios2 \
+ |nios2 \
|ppc|powerpc|5xx|5xxx|512x|8xx|8220|824x|8260|83xx|85xx|86xx|4xx|7xx|74xx|TSEC \
|sh|sh2|sh3|sh4 \
|sparc \
diff --git a/Makefile b/Makefile
index 686e6fb..c26e491 100644
--- a/Makefile
+++ b/Makefile
@@ -3462,68 +3462,6 @@
#========================================================================
# Nios
#========================================================================
-#########################################################################
-## Nios32
-#########################################################################
-
-ADNPESC1_DNPEVA2_base_32_config \
-ADNPESC1_base_32_config \
-ADNPESC1_config: unconfig
- @mkdir -p $(obj)include
- @[ -z "$(findstring _DNPEVA2,$@)" ] || \
- { echo "#define CONFIG_DNPEVA2 1" >>$(obj)include/config.h ; \
- $(XECHO) "... DNP/EVA2 configuration" ; \
- }
- @[ -z "$(findstring _base_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'base_32' configuration" ; \
- }
- @[ -z "$(findstring ADNPESC1_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_BASE_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'base_32' configuration (DEFAULT)" ; \
- }
- @$(MKCONFIG) -a ADNPESC1 nios nios adnpesc1 ssv
-
-DK1C20_safe_32_config \
-DK1C20_standard_32_config \
-DK1C20_config: unconfig
- @mkdir -p $(obj)include
- @[ -z "$(findstring _safe_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'safe_32' configuration" ; \
- }
- @[ -z "$(findstring _standard_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'standard_32' configuration" ; \
- }
- @[ -z "$(findstring DK1C20_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
- }
- @$(MKCONFIG) -a DK1C20 nios nios dk1c20 altera
-
-DK1S10_safe_32_config \
-DK1S10_standard_32_config \
-DK1S10_mtx_ldk_20_config \
-DK1S10_config: unconfig
- @mkdir -p $(obj)include
- @[ -z "$(findstring _safe_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_SAFE_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'safe_32' configuration" ; \
- }
- @[ -z "$(findstring _standard_32,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'standard_32' configuration" ; \
- }
- @[ -z "$(findstring _mtx_ldk_20,$@)" ] || \
- { echo "#define CONFIG_NIOS_MTX_LDK_20 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'mtx_ldk_20' configuration" ; \
- }
- @[ -z "$(findstring DK1S10_config,$@)" ] || \
- { echo "#define CONFIG_NIOS_STANDARD_32 1" >>$(obj)include/config.h ; \
- $(XECHO) "... NIOS 'standard_32' configuration (DEFAULT)" ; \
- }
- @$(MKCONFIG) -a DK1S10 nios nios dk1s10 altera
#########################################################################
## Nios-II
diff --git a/README b/README
index acb3308..68f1720 100644
--- a/README
+++ b/README
@@ -177,9 +177,6 @@
/mips Files generic to MIPS architecture
/cpu CPU specific files
/lib Architecture specific library files
- /nios Files generic to Altera NIOS architecture
- /cpu CPU specific files
- /lib Architecture specific library files
/nios2 Files generic to Altera NIOS2 architecture
/cpu CPU specific files
/lib Architecture specific library files
@@ -3337,8 +3334,8 @@
Currently supported: Linux, NetBSD, VxWorks, QNX, RTEMS, LynxOS,
INTEGRITY).
* Target CPU Architecture (Provisions for Alpha, ARM, AVR32, Intel x86,
- IA64, MIPS, NIOS, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
- Currently supported: ARM, AVR32, Intel x86, MIPS, NIOS, PowerPC).
+ IA64, MIPS, Nios II, PowerPC, IBM S390, SuperH, Sparc, Sparc 64 Bit;
+ Currently supported: ARM, AVR32, Intel x86, MIPS, Nios II, PowerPC).
* Compression Type (uncompressed, gzip, bzip2)
* Load Address
* Entry Point
diff --git a/arch/nios/config.mk b/arch/nios/config.mk
deleted file mode 100644
index e1b9f07..0000000
--- a/arch/nios/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2003
-# Psyent Corporation <www.psyent.com>
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-CROSS_COMPILE ?= nios-elf-
-
-STANDALONE_LOAD_ADDR = 0x00800000 -L $(gcclibdir)/m32
-
-PLATFORM_CPPFLAGS += -m32 -DCONFIG_NIOS -D__NIOS__ -ffixed-g7 -gstabs
diff --git a/arch/nios/cpu/Makefile b/arch/nios/cpu/Makefile
deleted file mode 100644
index ad17456..0000000
--- a/arch/nios/cpu/Makefile
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(CPU).a
-
-START = start.o
-SOBJS = traps.o
-COBJS = cpu.o interrupts.o serial.o asmi.o spi.o
-
-SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-START := $(addprefix $(obj),$(START))
-
-all: $(obj).depend $(START) $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/nios/cpu/asmi.c b/arch/nios/cpu/asmi.c
deleted file mode 100644
index 33553b7..0000000
--- a/arch/nios/cpu/asmi.c
+++ /dev/null
@@ -1,695 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_NIOS_ASMI)
-#include <command.h>
-#include <nios-io.h>
-
-#if !defined(CONFIG_SYS_NIOS_ASMIBASE)
-#error "*** CONFIG_SYS_NIOS_ASMIBASE not defined ***"
-#endif
-
-/*-----------------------------------------------------------------------*/
-#define SHORT_HELP\
- "asmi - read/write Cyclone ASMI configuration device.\n"
-
-#define LONG_HELP\
- "\n"\
- "asmi erase start [end]\n"\
- " - erase sector start or sectors start through end.\n"\
- "asmi info\n"\
- " - display ASMI device information.\n"\
- "asmi protect on | off\n"\
- " - turn device protection on or off.\n"\
- "asmi read addr offset count\n"\
- " - read count bytes from offset to addr.\n"\
- "asmi write addr offset count\n"\
- " - write count bytes to offset from addr.\n"\
- "asmi verify addr offset count\n"\
- " - verify count bytes at offset from addr."
-
-
-/*-----------------------------------------------------------------------*/
-/* Operation codes for serial configuration devices
- */
-#define ASMI_WRITE_ENA 0x06 /* Write enable */
-#define ASMI_WRITE_DIS 0x04 /* Write disable */
-#define ASMI_READ_STAT 0x05 /* Read status */
-#define ASMI_READ_BYTES 0x03 /* Read bytes */
-#define ASMI_READ_ID 0xab /* Read silicon id */
-#define ASMI_WRITE_STAT 0x01 /* Write status */
-#define ASMI_WRITE_BYTES 0x02 /* Write bytes */
-#define ASMI_ERASE_BULK 0xc7 /* Erase entire device */
-#define ASMI_ERASE_SECT 0xd8 /* Erase sector */
-
-/* Device status register bits
- */
-#define ASMI_STATUS_WIP (1<<0) /* Write in progress */
-#define ASMI_STATUS_WEL (1<<1) /* Write enable latch */
-
-static nios_asmi_t *asmi = (nios_asmi_t *)CONFIG_SYS_NIOS_ASMIBASE;
-
-/***********************************************************************
- * Device access
- ***********************************************************************/
-static void asmi_cs (int assert)
-{
- if (assert) {
- asmi->control |= NIOS_ASMI_SSO;
- } else {
- /* Let all bits shift out */
- while ((asmi->status & NIOS_ASMI_TMT) == 0)
- ;
- asmi->control &= ~NIOS_ASMI_SSO;
- }
-}
-
-static void asmi_tx (unsigned char c)
-{
- while ((asmi->status & NIOS_ASMI_TRDY) == 0)
- ;
- asmi->txdata = c;
-}
-
-static int asmi_rx (void)
-{
- while ((asmi->status & NIOS_ASMI_RRDY) == 0)
- ;
- return (asmi->rxdata);
-}
-
-static unsigned char bitrev[] = {
- 0x00, 0x08, 0x04, 0x0c, 0x02, 0x0a, 0x06, 0x0e,
- 0x01, 0x09, 0x05, 0x0d, 0x03, 0x0b, 0x07, 0x0f
-};
-
-static unsigned char asmi_bitrev( unsigned char c )
-{
- unsigned char val;
-
- val = bitrev[c>>4];
- val |= bitrev[c & 0x0f]<<4;
- return (val);
-}
-
-static void asmi_rcv (unsigned char *dst, int len)
-{
- while (len--) {
- asmi_tx (0);
- *dst++ = asmi_rx ();
- }
-}
-
-static void asmi_rrcv (unsigned char *dst, int len)
-{
- while (len--) {
- asmi_tx (0);
- *dst++ = asmi_bitrev (asmi_rx ());
- }
-}
-
-static void asmi_snd (unsigned char *src, int len)
-{
- while (len--) {
- asmi_tx (*src++);
- asmi_rx ();
- }
-}
-
-static void asmi_rsnd (unsigned char *src, int len)
-{
- while (len--) {
- asmi_tx (asmi_bitrev (*src++));
- asmi_rx ();
- }
-}
-
-static void asmi_wr_enable (void)
-{
- asmi_cs (1);
- asmi_tx (ASMI_WRITE_ENA);
- asmi_rx ();
- asmi_cs (0);
-}
-
-static unsigned char asmi_status_rd (void)
-{
- unsigned char status;
-
- asmi_cs (1);
- asmi_tx (ASMI_READ_STAT);
- asmi_rx ();
- asmi_tx (0);
- status = asmi_rx ();
- asmi_cs (0);
- return (status);
-}
-
-static void asmi_status_wr (unsigned char status)
-{
- asmi_wr_enable ();
- asmi_cs (1);
- asmi_tx (ASMI_WRITE_STAT);
- asmi_rx ();
- asmi_tx (status);
- asmi_rx ();
- asmi_cs (0);
- return;
-}
-
-/***********************************************************************
- * Device information
- ***********************************************************************/
-typedef struct asmi_devinfo_t {
- const char *name; /* Device name */
- unsigned char id; /* Device silicon id */
- unsigned char size; /* Total size log2(bytes)*/
- unsigned char num_sects; /* Number of sectors */
- unsigned char sz_sect; /* Sector size log2(bytes) */
- unsigned char sz_page; /* Page size log2(bytes) */
- unsigned char prot_mask; /* Protection mask */
-}asmi_devinfo_t;
-
-static struct asmi_devinfo_t devinfo[] = {
- { "EPCS1 ", 0x10, 17, 4, 15, 8, 0x0c },
- { "EPCS4 ", 0x12, 19, 8, 16, 8, 0x1c },
- { 0, 0, 0, 0, 0, 0 }
-};
-
-static asmi_devinfo_t *asmi_dev_find (void)
-{
- unsigned char buf[4];
- unsigned char id;
- int i;
- struct asmi_devinfo_t *dev = NULL;
-
- /* Read silicon id requires 3 "dummy bytes" before it's put
- * on the wire.
- */
- buf[0] = ASMI_READ_ID;
- buf[1] = 0;
- buf[2] = 0;
- buf[3] = 0;
-
- asmi_cs (1);
- asmi_snd (buf,4);
- asmi_rcv (buf,1);
- asmi_cs (0);
- id = buf[0];
-
- /* Find the info struct */
- i = 0;
- while (devinfo[i].name) {
- if (id == devinfo[i].id) {
- dev = &devinfo[i];
- break;
- }
- i++;
- }
-
- return (dev);
-}
-
-/***********************************************************************
- * Misc Utilities
- ***********************************************************************/
-static unsigned asmi_cfgsz (void)
-{
- unsigned sz = 0;
- unsigned char buf[128];
- unsigned char *p;
-
- /* Read in the first 128 bytes of the device */
- buf[0] = ASMI_READ_BYTES;
- buf[1] = 0;
- buf[2] = 0;
- buf[3] = 0;
-
- asmi_cs (1);
- asmi_snd (buf,4);
- asmi_rrcv (buf, sizeof(buf));
- asmi_cs (0);
-
- /* Search for the starting 0x6a which is followed by the
- * 4-byte 'register' and 4-byte bit-count.
- */
- p = buf;
- while (p < buf + sizeof(buf)-8) {
- if ( *p == 0x6a ) {
- /* Point to bit count and extract */
- p += 5;
- sz = *p++;
- sz |= *p++ << 8;
- sz |= *p++ << 16;
- sz |= *p++ << 24;
- /* Convert to byte count */
- sz += 7;
- sz >>= 3;
- } else if (*p == 0xff) {
- /* 0xff is ok ... just skip */
- p++;
- continue;
- } else {
- /* Not 0xff or 0x6a ... something's not
- * right ... report 'unknown' (sz=0).
- */
- break;
- }
- }
- return (sz);
-}
-
-static int asmi_erase (unsigned start, unsigned end)
-{
- unsigned off, sectsz;
- unsigned char buf[4];
- struct asmi_devinfo_t *dev = asmi_dev_find ();
-
- if (!dev || (start>end))
- return (-1);
-
- /* Erase the requested sectors. An address is required
- * that lies within the requested sector -- we'll just
- * use the first address in the sector.
- */
- printf ("asmi erasing sector %d ", start);
- if (start != end)
- printf ("to %d ", end);
- sectsz = (1 << dev->sz_sect);
- while (start <= end) {
- off = start * sectsz;
- start++;
-
- buf[0] = ASMI_ERASE_SECT;
- buf[1] = off >> 16;
- buf[2] = off >> 8;
- buf[3] = off;
-
- asmi_wr_enable ();
- asmi_cs (1);
- asmi_snd (buf,4);
- asmi_cs (0);
-
- printf ("."); /* Some user feedback */
-
- /* Wait for erase to complete */
- while (asmi_status_rd() & ASMI_STATUS_WIP)
- ;
- }
- printf (" done.\n");
- return (0);
-}
-
-static int asmi_read (ulong addr, ulong off, ulong cnt)
-{
- unsigned char buf[4];
-
- buf[0] = ASMI_READ_BYTES;
- buf[1] = off >> 16;
- buf[2] = off >> 8;
- buf[3] = off;
-
- asmi_cs (1);
- asmi_snd (buf,4);
- asmi_rrcv ((unsigned char *)addr, cnt);
- asmi_cs (0);
-
- return (0);
-}
-
-static
-int asmi_write (ulong addr, ulong off, ulong cnt)
-{
- ulong wrcnt;
- unsigned pgsz;
- unsigned char buf[4];
- struct asmi_devinfo_t *dev = asmi_dev_find ();
-
- if (!dev)
- return (-1);
-
- pgsz = (1<<dev->sz_page);
- while (cnt) {
- if (off % pgsz)
- wrcnt = pgsz - (off % pgsz);
- else
- wrcnt = pgsz;
- wrcnt = (wrcnt > cnt) ? cnt : wrcnt;
-
- buf[0] = ASMI_WRITE_BYTES;
- buf[1] = off >> 16;
- buf[2] = off >> 8;
- buf[3] = off;
-
- asmi_wr_enable ();
- asmi_cs (1);
- asmi_snd (buf,4);
- asmi_rsnd ((unsigned char *)addr, wrcnt);
- asmi_cs (0);
-
- /* Wait for write to complete */
- while (asmi_status_rd() & ASMI_STATUS_WIP)
- ;
-
- cnt -= wrcnt;
- off += wrcnt;
- addr += wrcnt;
- }
-
- return (0);
-}
-
-static
-int asmi_verify (ulong addr, ulong off, ulong cnt, ulong *err)
-{
- ulong rdcnt;
- unsigned char buf[256];
- unsigned char *start,*end;
- int i;
-
- start = end = (unsigned char *)addr;
- while (cnt) {
- rdcnt = (cnt>sizeof(buf)) ? sizeof(buf) : cnt;
- asmi_read ((ulong)buf, off, rdcnt);
- for (i=0; i<rdcnt; i++) {
- if (*end != buf[i]) {
- *err = end - start;
- return(-1);
- }
- end++;
- }
- cnt -= rdcnt;
- off += rdcnt;
- }
- return (0);
-}
-
-static int asmi_sect_erased (int sect, unsigned *offset,
- struct asmi_devinfo_t *dev)
-{
- unsigned char buf[128];
- unsigned off, end;
- unsigned sectsz;
- int i;
-
- sectsz = (1 << dev->sz_sect);
- off = sectsz * sect;
- end = off + sectsz;
-
- while (off < end) {
- asmi_read ((ulong)buf, off, sizeof(buf));
- for (i=0; i < sizeof(buf); i++) {
- if (buf[i] != 0xff) {
- *offset = off + i;
- return (0);
- }
- }
- off += sizeof(buf);
- }
- return (1);
-}
-
-
-/***********************************************************************
- * Commands
- ***********************************************************************/
-static
-void do_asmi_info (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
- int i;
- unsigned char stat;
- unsigned tmp;
- int erased;
-
- /* Basic device info */
- printf ("%s: %d kbytes (%d sectors x %d kbytes,"
- " %d bytes/page)\n",
- dev->name, 1 << (dev->size-10),
- dev->num_sects, 1 << (dev->sz_sect-10),
- 1 << dev->sz_page );
-
- /* Status -- for now protection is all-or-nothing */
- stat = asmi_status_rd();
- printf ("status: 0x%02x (WIP:%d, WEL:%d, PROT:%s)\n",
- stat,
- (stat & ASMI_STATUS_WIP) ? 1 : 0,
- (stat & ASMI_STATUS_WEL) ? 1 : 0,
- (stat & dev->prot_mask) ? "on" : "off" );
-
- /* Configuration */
- tmp = asmi_cfgsz ();
- if (tmp) {
- printf ("config: 0x%06x (%d) bytes\n", tmp, tmp );
- } else {
- printf ("config: unknown\n" );
- }
-
- /* Sector info */
- for (i=0; i<dev->num_sects; i++) {
- erased = asmi_sect_erased (i, &tmp, dev);
- printf (" %d: %06x ",
- i, i*(1<<dev->sz_sect) );
- if (erased)
- printf ("erased\n");
- else
- printf ("data @ 0x%06x\n", tmp);
- }
-
- return;
-}
-
-static
-void do_asmi_erase (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
- unsigned start,end;
-
- if ((argc < 3) || (argc > 4)) {
- printf ("USAGE: asmi erase sect [end]\n");
- return;
- }
- if ((asmi_status_rd() & dev->prot_mask) != 0) {
- printf ( "asmi: device protected.\n");
- return;
- }
-
- start = simple_strtoul (argv[2], NULL, 10);
- if (argc > 3)
- end = simple_strtoul (argv[3], NULL, 10);
- else
- end = start;
- if ((start >= dev->num_sects) || (start > end)) {
- printf ("asmi: invalid sector range: [%d:%d]\n",
- start, end );
- return;
- }
-
- asmi_erase (start, end);
-
- return;
-}
-
-static
-void do_asmi_protect (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
- unsigned char stat;
-
- /* For now protection is all-or-nothing to keep things
- * simple. The protection bits don't map in a linear
- * fashion ... and we would rather protect the bottom
- * of the device since it contains the config data and
- * leave the top unprotected for app use. But unfortunately
- * protection works from top-to-bottom so it does
- * really help very much from a software app point-of-view.
- */
- if (argc < 3) {
- printf ("USAGE: asmi protect on | off\n");
- return;
- }
- if (!dev)
- return;
-
- /* Protection on/off is just a matter of setting/clearing
- * all protection bits in the status register.
- */
- stat = asmi_status_rd ();
- if (strcmp ("on", argv[2]) == 0) {
- stat |= dev->prot_mask;
- } else if (strcmp ("off", argv[2]) == 0 ) {
- stat &= ~dev->prot_mask;
- } else {
- printf ("asmi: unknown protection: %s\n", argv[2]);
- return;
- }
- asmi_status_wr (stat);
- return;
-}
-
-static
-void do_asmi_read (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
- ulong addr,off,cnt;
- ulong sz;
-
- if (argc < 5) {
- printf ("USAGE: asmi read addr offset count\n");
- return;
- }
-
- sz = 1 << dev->size;
- addr = simple_strtoul (argv[2], NULL, 16);
- off = simple_strtoul (argv[3], NULL, 16);
- cnt = simple_strtoul (argv[4], NULL, 16);
- if (off > sz) {
- printf ("offset is greater than device size"
- "... aborting.\n");
- return;
- }
- if ((off + cnt) > sz) {
- printf ("request exceeds device size"
- "... truncating.\n");
- cnt = sz - off;
- }
- printf ("asmi: read %08lx <- %06lx (0x%lx bytes)\n",
- addr, off, cnt);
- asmi_read (addr, off, cnt);
-
- return;
-}
-
-static
-void do_asmi_write (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
- ulong addr,off,cnt;
- ulong sz;
- ulong err;
-
- if (argc < 5) {
- printf ("USAGE: asmi write addr offset count\n");
- return;
- }
- if ((asmi_status_rd() & dev->prot_mask) != 0) {
- printf ( "asmi: device protected.\n");
- return;
- }
-
- sz = 1 << dev->size;
- addr = simple_strtoul (argv[2], NULL, 16);
- off = simple_strtoul (argv[3], NULL, 16);
- cnt = simple_strtoul (argv[4], NULL, 16);
- if (off > sz) {
- printf ("offset is greater than device size"
- "... aborting.\n");
- return;
- }
- if ((off + cnt) > sz) {
- printf ("request exceeds device size"
- "... truncating.\n");
- cnt = sz - off;
- }
- printf ("asmi: write %08lx -> %06lx (0x%lx bytes)\n",
- addr, off, cnt);
- asmi_write (addr, off, cnt);
- if (asmi_verify (addr, off, cnt, &err) != 0)
- printf ("asmi: write error at offset %06lx\n", err);
-
- return;
-}
-
-static
-void do_asmi_verify (struct asmi_devinfo_t *dev, int argc, char *argv[])
-{
- ulong addr,off,cnt;
- ulong sz;
- ulong err;
-
- if (argc < 5) {
- printf ("USAGE: asmi verify addr offset count\n");
- return;
- }
-
- sz = 1 << dev->size;
- addr = simple_strtoul (argv[2], NULL, 16);
- off = simple_strtoul (argv[3], NULL, 16);
- cnt = simple_strtoul (argv[4], NULL, 16);
- if (off > sz) {
- printf ("offset is greater than device size"
- "... aborting.\n");
- return;
- }
- if ((off + cnt) > sz) {
- printf ("request exceeds device size"
- "... truncating.\n");
- cnt = sz - off;
- }
- printf ("asmi: verify %08lx -> %06lx (0x%lx bytes)\n",
- addr, off, cnt);
- if (asmi_verify (addr, off, cnt, &err) != 0)
- printf ("asmi: verify error at offset %06lx\n", err);
-
- return;
-}
-
-/*-----------------------------------------------------------------------*/
-int do_asmi (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int len;
- struct asmi_devinfo_t *dev = asmi_dev_find ();
-
- if (argc < 2) {
- printf ("Usage:%s", LONG_HELP);
- return (0);
- }
-
- if (!dev) {
- printf ("asmi: device not found.\n");
- return (0);
- }
-
- len = strlen (argv[1]);
- if (strncmp ("info", argv[1], len) == 0) {
- do_asmi_info ( dev, argc, argv);
- } else if (strncmp ("erase", argv[1], len) == 0) {
- do_asmi_erase (dev, argc, argv);
- } else if (strncmp ("protect", argv[1], len) == 0) {
- do_asmi_protect (dev, argc, argv);
- } else if (strncmp ("read", argv[1], len) == 0) {
- do_asmi_read (dev, argc, argv);
- } else if (strncmp ("write", argv[1], len) == 0) {
- do_asmi_write (dev, argc, argv);
- } else if (strncmp ("verify", argv[1], len) == 0) {
- do_asmi_verify (dev, argc, argv);
- } else {
- printf ("asmi: unknown operation: %s\n", argv[1]);
- }
-
- return (0);
-}
-
-/*-----------------------------------------------------------------------*/
-
-
-U_BOOT_CMD( asmi, 5, 0, do_asmi, SHORT_HELP, LONG_HELP );
-
-#endif /* CONFIG_NIOS_ASMI */
diff --git a/arch/nios/cpu/config.mk b/arch/nios/cpu/config.mk
deleted file mode 100644
index f228d72..0000000
--- a/arch/nios/cpu/config.mk
+++ /dev/null
@@ -1,24 +0,0 @@
-#
-# (C) Copyright 2000
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS +=
diff --git a/arch/nios/cpu/cpu.c b/arch/nios/cpu/cpu.c
deleted file mode 100644
index 5519e82..0000000
--- a/arch/nios/cpu/cpu.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <nios.h>
-
-
-int checkcpu (void)
-{
- unsigned val;
- unsigned rev_major;
- unsigned rev_minor;
- short nregs, hi_limit, lo_limit;
-
- /* Get cpu version info */
- val = rdctl (CTL_CPU_ID);
- puts ("CPU: ");
- printf ("%s", (val & 0x00008000) ? "Nios-16 " : "Nios-32 ");
- rev_major = (val>>12) & 0x07;
- rev_minor = (val>>4) & 0x0ff;
- printf ("Rev. %d.%d (0x%04x)", rev_major, rev_minor,
- val & 0xffff);
- if (rev_major == 0x08)
- printf (" [OpenCore (R) Plus]");
- printf ("\n");
-
- /* Check register file */
- val = rdctl (CTL_WVALID);
- lo_limit = val & 0x01f;
- hi_limit = (val>>5) & 0x1f;
- nregs = (hi_limit + 2) * 16;
- printf ("Reg file size: %d LO_LIMIT/HI_LIMIT: %d/%d\n",
- nregs, lo_limit, hi_limit);
-
- return (0);
-}
-
-
-int do_reset (void)
-{
- /* trap 0 does the trick ... at least with the OCI debug
- * present -- haven't tested without it yet (stm).
- */
- disable_interrupts ();
- ipri (1);
- asm volatile ("trap 0\n");
-
- /* No return ;-) */
-
- return(0);
-}
-
-
-#if defined(CONFIG_WATCHDOG)
-void watchdog_reset (void)
-{
-}
-#endif /* CONFIG_WATCHDOG */
diff --git a/arch/nios/cpu/interrupts.c b/arch/nios/cpu/interrupts.c
deleted file mode 100644
index 55a5718..0000000
--- a/arch/nios/cpu/interrupts.c
+++ /dev/null
@@ -1,196 +0,0 @@
-/*
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <nios.h>
-#include <nios-io.h>
-#include <asm/ptrace.h>
-#include <common.h>
-#include <command.h>
-#include <watchdog.h>
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-
-/****************************************************************************/
-
-struct irq_action {
- interrupt_handler_t *handler;
- void *arg;
- int count;
-};
-
-static struct irq_action irq_vecs[64];
-
-/*************************************************************************/
-volatile ulong timestamp = 0;
-
-void reset_timer (void)
-{
- timestamp = 0;
-}
-
-ulong get_timer (ulong base)
-{
- WATCHDOG_RESET ();
- return (timestamp - base);
-}
-
-void set_timer (ulong t)
-{
- timestamp = t;
-}
-
-
-/* The board must handle this interrupt if a timer is not
- * provided.
- */
-#if defined(CONFIG_SYS_NIOS_TMRBASE)
-void timer_interrupt (struct pt_regs *regs)
-{
- /* Interrupt is cleared by writing anything to the
- * status register.
- */
- nios_timer_t *tmr = (nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
- tmr->status = 0;
- timestamp += CONFIG_SYS_NIOS_TMRMS;
-#ifdef CONFIG_STATUS_LED
- status_led_tick(timestamp);
-#endif
-}
-#endif
-
-/*************************************************************************/
-int disable_interrupts (void)
-{
- int val = 0;
-
- /* Writing anything to CLR_IE disables interrupts */
- val = rdctl (CTL_STATUS);
- wrctl (CTL_CLR_IE, 0);
- return (val & STATUS_IE);
-}
-
-void enable_interrupts( void )
-{
- /* Writing anything SET_IE enables interrupts */
- wrctl (CTL_SET_IE, 0);
-}
-
-void external_interrupt (struct pt_regs *regs)
-{
- unsigned vec;
-
- vec = (regs->status & STATUS_IPRI) >> 9; /* ipri */
-
- irq_vecs[vec].count++;
- if (irq_vecs[vec].handler != NULL) {
- (*irq_vecs[vec].handler)(irq_vecs[vec].arg);
- } else {
- /* A sad side-effect of masking a bogus interrupt is
- * that lower priority interrupts will also be disabled.
- * This is probably not what we want ... so hang insted.
- */
- printf ("Unhandled interrupt: 0x%x\n", vec);
- disable_interrupts ();
- hang ();
- }
-}
-
-/*************************************************************************/
-int interrupt_init (void)
-{
- int vec;
-
-#if defined(CONFIG_SYS_NIOS_TMRBASE)
- nios_timer_t *tmr = (nios_timer_t *)CONFIG_SYS_NIOS_TMRBASE;
-
- tmr->control &= ~NIOS_TIMER_ITO;
- tmr->control |= NIOS_TIMER_STOP;
-#if defined(CONFIG_SYS_NIOS_TMRCNT)
- tmr->periodl = CONFIG_SYS_NIOS_TMRCNT & 0xffff;
- tmr->periodh = (CONFIG_SYS_NIOS_TMRCNT >> 16) & 0xffff;
-#endif
-#endif
-
- for (vec=0; vec<64; vec++ ) {
- irq_vecs[vec].handler = NULL;
- irq_vecs[vec].arg = NULL;
- irq_vecs[vec].count = 0;
- }
-
- /* Need timus interruptus -- start the lopri timer */
-#if defined(CONFIG_SYS_NIOS_TMRBASE)
- tmr->control |= ( NIOS_TIMER_ITO |
- NIOS_TIMER_CONT |
- NIOS_TIMER_START );
- ipri (CONFIG_SYS_NIOS_TMRIRQ + 1);
-#endif
- enable_interrupts ();
- return (0);
-}
-
-void irq_install_handler (int vec, interrupt_handler_t *handler, void *arg)
-{
- struct irq_action *irqa = irq_vecs;
- int i = vec;
- int flag;
-
- if (irqa[i].handler != NULL) {
- printf ("Interrupt vector %d: handler 0x%x "
- "replacing 0x%x\n",
- vec, (uint)handler, (uint)irqa[i].handler);
- }
-
- flag = disable_interrupts ();
- irqa[i].handler = handler;
- irqa[i].arg = arg;
- if (flag )
- enable_interrupts ();
-}
-
-/*************************************************************************/
-#if defined(CONFIG_CMD_IRQ)
-int do_irqinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- int vec;
-
- printf ("\nInterrupt-Information:\n");
- printf ("Nr Routine Arg Count\n");
-
- for (vec=0; vec<64; vec++) {
- if (irq_vecs[vec].handler != NULL) {
- printf ("%02d %08lx %08lx %d\n",
- vec,
- (ulong)irq_vecs[vec].handler<<1,
- (ulong)irq_vecs[vec].arg,
- irq_vecs[vec].count);
- }
- }
-
- return (0);
-}
-#endif
diff --git a/arch/nios/cpu/serial.c b/arch/nios/cpu/serial.c
deleted file mode 100644
index 44aa600..0000000
--- a/arch/nios/cpu/serial.c
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <watchdog.h>
-#include <nios-io.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*------------------------------------------------------------------
- * JTAG acts as the serial port
- *-----------------------------------------------------------------*/
-#if defined(CONFIG_CONSOLE_JTAG)
-
-static nios_jtag_t *jtag = (nios_jtag_t *)CONFIG_SYS_NIOS_CONSOLE;
-
-void serial_setbrg( void ){ return; }
-int serial_init( void ) { return(0);}
-
-void serial_putc (char c)
-{
- while ((jtag->txcntl & NIOS_JTAG_TRDY) != 0)
- WATCHDOG_RESET ();
- jtag->txcntl = NIOS_JTAG_TRDY | (unsigned char)c;
-}
-
-void serial_puts (const char *s)
-{
- while (*s != 0)
- serial_putc (*s++);
-}
-
-int serial_tstc (void)
-{
- return (jtag->rxcntl & NIOS_JTAG_RRDY);
-}
-
-int serial_getc (void)
-{
- int c;
- while (serial_tstc() == 0)
- WATCHDOG_RESET ();
- c = jtag->rxcntl & 0x0ff;
- jtag->rxcntl = 0;
- return (c);
-}
-
-/*------------------------------------------------------------------
- * UART the serial port
- *-----------------------------------------------------------------*/
-#else
-
-static nios_uart_t *uart = (nios_uart_t *)CONFIG_SYS_NIOS_CONSOLE;
-
-#if defined(CONFIG_SYS_NIOS_FIXEDBAUD)
-
-/* Everything's already setup for fixed-baud PTF
- * assignment
- */
-void serial_setbrg (void){ return; }
-int serial_init (void) { return (0);}
-
-#else
-
-void serial_setbrg (void)
-{
- unsigned div;
-
- div = (CONFIG_SYS_CLK_FREQ/gd->baudrate)-1;
- uart->divisor = div;
- return;
-}
-
-int serial_init (void)
-{
- serial_setbrg ();
- return (0);
-}
-
-#endif /* CONFIG_SYS_NIOS_FIXEDBAUD */
-
-
-/*-----------------------------------------------------------------------
- * UART CONSOLE
- *---------------------------------------------------------------------*/
-void serial_putc (char c)
-{
- if (c == '\n')
- serial_putc ('\r');
- while ((uart->status & NIOS_UART_TRDY) == 0)
- WATCHDOG_RESET ();
- uart->txdata = (unsigned char)c;
-}
-
-void serial_puts (const char *s)
-{
- while (*s != 0) {
- serial_putc (*s++);
- }
-}
-
-int serial_tstc (void)
-{
- return (uart->status & NIOS_UART_RRDY);
-}
-
-int serial_getc (void)
-{
- while (serial_tstc () == 0)
- WATCHDOG_RESET ();
- return( uart->rxdata & 0x00ff );
-}
-
-#endif /* CONFIG_JTAG_CONSOLE */
diff --git a/arch/nios/cpu/spi.c b/arch/nios/cpu/spi.c
deleted file mode 100644
index 89f9797..0000000
--- a/arch/nios/cpu/spi.c
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <linux/ctype.h>
-
-#if defined(CONFIG_NIOS_SPI)
-#include <nios-io.h>
-#include <spi.h>
-
-#if !defined(CONFIG_SYS_NIOS_SPIBASE)
-#error "*** CONFIG_SYS_NIOS_SPIBASE not defined ***"
-#endif
-
-#if !defined(CONFIG_SYS_NIOS_SPIBITS)
-#error "*** CONFIG_SYS_NIOS_SPIBITS not defined ***"
-#endif
-
-#if (CONFIG_SYS_NIOS_SPIBITS != 8) && (CONFIG_SYS_NIOS_SPIBITS != 16)
-#error "*** CONFIG_SYS_NIOS_SPIBITS should be either 8 or 16 ***"
-#endif
-
-static nios_spi_t *spi = (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
-
-/* Warning:
- * You cannot enable DEBUG for early system initalization, i. e. when
- * this driver is used to read environment parameters like "baudrate"
- * from EEPROM which are used to initialize the serial port which is
- * needed to print the debug messages...
- */
-#undef DEBUG
-
-#ifdef DEBUG
-
-#define DPRINT(a) printf a;
-/* -----------------------------------------------
- * Helper functions to peek into tx and rx buffers
- * ----------------------------------------------- */
-static const char * const hex_digit = "0123456789ABCDEF";
-
-static char quickhex (int i)
-{
- return hex_digit[i];
-}
-
-static void memdump (const void *pv, int num)
-{
- int i;
- const unsigned char *pc = (const unsigned char *) pv;
-
- for (i = 0; i < num; i++)
- printf ("%c%c ", quickhex (pc[i] >> 4), quickhex (pc[i] & 0x0f));
- printf ("\t");
- for (i = 0; i < num; i++)
- printf ("%c", isprint (pc[i]) ? pc[i] : '.');
- printf ("\n");
-}
-#else /* !DEBUG */
-
-#define DPRINT(a)
-#define memdump(p,n)
-
-#endif /* DEBUG */
-
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
- unsigned int max_hz, unsigned int mode)
-{
- struct spi_slave *slave;
-
- if (!spi_cs_is_valid(bus, cs))
- return NULL;
-
- slave = malloc(sizeof(struct spi_slave));
- if (!slave)
- return NULL;
-
- slave->bus = bus;
- slave->cs = cs;
-
- /* TODO: Add support for different modes and speeds */
-
- return slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
- free(slave);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
- return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-
-}
-
-/*
- * SPI transfer:
- *
- * See include/spi.h and http://www.altera.com/literature/ds/ds_nios_spi.pdf
- * for more informations.
- */
-int spi_xfer(struct spi_slave *slave, int bitlen, const void *dout,
- void *din, unsigned long flags)
-{
- const u8 *txd = dout;
- u8 *rxd = din;
- int j;
-
- DPRINT(("spi_xfer: slave %u:%u dout %08X din %08X bitlen %d\n",
- slave->bus, slave->cs, *(uint *)dout, *(uint *)din, bitlen));
-
- memdump(dout, (bitlen + 7) / 8);
-
- if (flags & SPI_XFER_BEGIN)
- spi_cs_activate(slave);
-
- if (!(flags & SPI_XFER_END) || bitlen > CONFIG_SYS_NIOS_SPIBITS) {
- /* leave chip select active */
- spi->control |= NIOS_SPI_SSO;
- }
-
- for ( j = 0; /* count each byte in */
- j < ((bitlen + 7) / 8); /* dout[] and din[] */
-
-#if (CONFIG_SYS_NIOS_SPIBITS == 8)
- j++) {
-
- while ((spi->status & NIOS_SPI_TRDY) == 0)
- ;
- spi->txdata = (unsigned)(txd[j]);
-
- while ((spi->status & NIOS_SPI_RRDY) == 0)
- ;
- rxd[j] = (unsigned char)(spi->rxdata & 0xff);
-
-#elif (CONFIG_SYS_NIOS_SPIBITS == 16)
- j++, j++) {
-
- while ((spi->status & NIOS_SPI_TRDY) == 0)
- ;
- if ((j+1) < ((bitlen + 7) / 8))
- spi->txdata = (unsigned)((txd[j] << 8) | txd[j+1]);
- else
- spi->txdata = (unsigned)(txd[j] << 8);
-
- while ((spi->status & NIOS_SPI_RRDY) == 0)
- ;
- rxd[j] = (unsigned char)((spi->rxdata >> 8) & 0xff);
- if ((j+1) < ((bitlen + 7) / 8))
- rxd[j+1] = (unsigned char)(spi->rxdata & 0xff);
-
-#else
-#error "*** unsupported value of CONFIG_SYS_NIOS_SPIBITS ***"
-#endif
-
- }
-
- if (bitlen > CONFIG_SYS_NIOS_SPIBITS && (flags & SPI_XFER_END)) {
- spi->control &= ~NIOS_SPI_SSO;
- }
-
- if (flags & SPI_XFER_END)
- spi_cs_deactivate(slave);
-
- memdump(din, (bitlen + 7) / 8);
-
- return 0;
-}
-
-#endif /* CONFIG_NIOS_SPI */
diff --git a/arch/nios/cpu/start.S b/arch/nios/cpu/start.S
deleted file mode 100644
index 3578a04..0000000
--- a/arch/nios/cpu/start.S
+++ /dev/null
@@ -1,238 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <config.h>
-#include <timestamp.h>
-#include <version.h>
-
-#if !defined(CONFIG_IDENT_STRING)
-#define CONFIG_IDENT_STRING ""
-#endif
-
-#define STATUS_INIT 0x8600 /* IE=1, IPRI=2 */
-
-/*************************************************************************
- * RESTART
- ************************************************************************/
-
- .text
- .global _start
-
-_start:
- bsr 0f
- nop
- .long _start
-
- /* GERMS -- The "standard-32" configuration GERMS monitor looks
- * for the string "Nios" at flash_base + 0xc (actually it only
- * tests for 'N', 'i'). You can leave support for this in place
- * as it's only a few words.
- */
- . = _start + 0x000c
- .string "Nios"
-
- .align 4
-0:
- /*
- * Early setup -- set cwp = HI_LIMIT, IPRI = 2, IE = 1 to
- * enable underflow exceptions. Disable cache.
- * NOTE: %o7 has return addr -- save in %g7 use later.
- */
- mov %g7, %o7
-
- pfx 2 /* WVALID */
- rdctl %g0
- lsri %g0, 1
- pfx %hi(STATUS_INIT)
- or %g0, %lo(STATUS_INIT)
- wrctl %g0 /* update status */
- nop
-
- /*
- * STACK
- */
- pfx %hi(CONFIG_SYS_INIT_SP)
- movi %sp, %lo(CONFIG_SYS_INIT_SP)
- pfx %xhi(CONFIG_SYS_INIT_SP)
- movhi %sp, %xlo(CONFIG_SYS_INIT_SP)
- mov %fp, %sp
-
- pfx %hi(4*16)
- subi %sp, %lo(4*16) /* Space for reg window mgmt */
-
- /*
- * RELOCATE -- %g7 has return addr from bsr at _start.
- */
- pfx %hi(__u_boot_cmd_end)
- movi %g5, %lo(__u_boot_cmd_end)
- pfx %xhi(__u_boot_cmd_end)
- movhi %g5, %xlo(__u_boot_cmd_end) /* %g5 <- end address */
-
- lsli %g7, 1 /* mem = retaddr << 1 */
- mov %g6, %g7
- subi %g6, 4 /* %g6 <- src addr */
- ld %g7, [%g7] /* %g7 <- dst addr */
-
- /* No need to move text sections if we're already located
- * at the proper address.
- */
- cmp %g7, %g6
- ifs cc_z
- br reloc
- nop /* delay slot */
-
-1: cmp %g7, %g5
- skps cc_nz
- br 2f
- nop /* delay slot */
-
- ld %g0, [%g6]
- addi %g6, 4 /* src++ */
- st [%g7], %g0
- addi %g7, 4 /* dst++ */
- br 1b
- nop /* delay slot */
-2:
-
- /*
- * Jump to relocation address
- */
- pfx %hi(reloc@h)
- movi %g0, %lo(reloc@h)
- pfx %xhi(reloc@h)
- movhi %g0, %xlo(reloc@h)
- jmp %g0
- nop /* delay slot */
-reloc:
-
- /*
- * CLEAR BSS
- */
- pfx %hi(__bss_end)
- movi %g5, %lo(__bss_end)
- pfx %xhi(__bss_end)
- movhi %g5, %xlo(__bss_end) /* %g5 <- end address */
- pfx %hi(__bss_start)
- movi %g7, %lo(__bss_start)
- pfx %xhi(__bss_start)
- movhi %g7, %xlo(__bss_start) /* %g7 <- end address */
-
- movi %g0, 0
-3: cmp %g7, %g5
- skps cc_nz
- br 4f
- nop /* delay slot */
-
- st [%g7], %g0
- addi %g7, 4 /* (delay slot) dst++ */
- br 3b
- nop /* delay slot */
-4:
-
- /*
- * INIT VECTOR TABLE
- */
- pfx %hi(CONFIG_SYS_VECT_BASE)
- movi %g0, %lo(CONFIG_SYS_VECT_BASE)
- pfx %xhi(CONFIG_SYS_VECT_BASE)
- movhi %g0, %xlo(CONFIG_SYS_VECT_BASE) /* dst */
- mov %l0, %g0
-
- pfx %hi(_vectors)
- movi %g1, %lo(_vectors)
- pfx %xhi(_vectors)
- movhi %g1, %xlo(_vectors) /* src */
- bgen %g2, 6 /* cnt = 64 */
-
- ldp %g3, [%l0, 3] /* bkpt vector */
- ldp %g4, [%l0, 4] /* single step vector */
-
-5: ld %g7, [%g1]
- addi %g1, 4 /* src++ */
- st [%g0], %g7
- addi %g0, 4 /* dst++ */
-
- subi %g2, 1 /* cnt-- */
- ifrnz %g2
- br 5b
- nop /* delay slot */
-
-#if defined(CONFIG_ROM_STUBS)
- /* Restore the breakpoint and single step exception
- * vectors to their original values.
- */
- stp [%l0,3], %g3 /* breakpoint */
- stp [%l0,4], %g4 /* single step */
-#endif
-
- /* For debug startup convenience ... software breakpoints
- * set prior to this point may not succeed ;-)
- */
- .global __start
-__start:
-
- /*
- * Call board_init -- never returns
- */
- pfx %hi(board_init@h)
- movi %g1, %lo(board_init@h)
- pfx %xhi(board_init@h)
- movhi %g1, %xlo(board_init@h)
- call %g1
- nop /* Delaly slot */
- /* NEVER RETURNS */
-
-/*
- * dly_clks -- Nios doesn't have a time/clk reference for simple
- * delay loops, so we do our best by counting instruction cycles.
- * A control register that counts system clock cycles would be
- * a handy feature -- hint for Altera ;-)
- */
- .globl dly_clks
- /* Each loop is 4 instructions as delay slot is always
- * executed. Each instruction is approximately 4 clocks
- * (according to some lame info from Altera). So ...
- * ... each loop is about 16 clocks.
- */
-
-dly_clks:
- lsri %o0, 4 /* cnt/16 */
-
-8: skprnz %o0
- br 9f
- subi %o0, 1 /* cnt--, Delay slot */
- br 8b
- nop
-
-9: lret
- nop /* Delay slot */
-
-
- .data
- .globl version_string
-
-version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
diff --git a/arch/nios/cpu/traps.S b/arch/nios/cpu/traps.S
deleted file mode 100644
index bc4d3f6..0000000
--- a/arch/nios/cpu/traps.S
+++ /dev/null
@@ -1,582 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-/*************************************************************************
- * Register window underflow
- *
- * The register window underflow exception occurs whenever the lowest
- * valid register window is in use (CWP=LO_LIMIT) and a save instruction
- * is issued. The save moves CWP below LO_LIMIT, %sp is set as normal,
- * then the exception is generated prior to executing the instruction
- * after the save.
- ************************************************************************/
- .text
- .global _cwp_lolimit
- .align 4
-
-_cwp_lolimit:
-
- /* Sixteen words are always allocated by the compiler in every
- * procedure's stack frame, always starting at %sp, for saving
- * 'in' and 'local' registers on a window overflow.
- *
- * Save the 'global' and 'in' regs on stack. They are restored
- * at cwp = HI_LIMIT. The 'local' regs aren't in-use at this point.
- */
- sts [%sp,0], %g0 /* Save 'global' regs*/
- sts [%sp,1], %g1
- sts [%sp,2], %g2
- sts [%sp,3], %g3
- sts [%sp,4], %g4
- sts [%sp,5], %g5
- sts [%sp,6], %g6
- sts [%sp,7], %g7
-
- sts [%sp,8], %i0 /* Save 'in' regs */
- sts [%sp,9], %i1
- sts [%sp,10], %i2
- sts [%sp,11], %i3
- sts [%sp,12], %i4
- sts [%sp,13], %i5
- sts [%sp,14], %i6
- sts [%sp,15], %i7
-
- /* Save current %sp and return address in a global so they are
- * available at cwp = HI_LIMIT ... where the 'global'/'in' regs
- * are restored. NOTE: %sp changes with cwp.
- */
- mov %g7, %o7
- mov %g6, %sp
-
- /* Get LO_LIMIT/HI_LIMIT to know where to start & stop. Note: in
- * the underflow exception, cwp is __NOT__ guaranteed to be zero.
- * If the OCI debug module is enabled the reset value for LO_LIMIT
- * is 2, not 1 -- so cwp can be 1 or 0.
- */
- pfx 2 /* WVALID */
- rdctl %g1
- mov %g2, %g1
- pfx 0
- and %g1, 0x1f /* g1 <- LO_LIMIT */
- lsri %g2, 5
- pfx 0
- and %g2,0x1f /* g2 <- HI_LIMIT */
-
- /* Set istatus so cwp = HI_LIMIT after tret
- */
- movi %g5, 0x1f
- lsli %g5, 4
- not %g5 /* mask to clr cwp */
- pfx 1 /* istatus */
- rdctl %g0
- and %g0, %g5 /* clear cwp field */
-
- mov %g4, %g2
- lsli %g4, 4
- or %g0, %g4 /* cwp = HI_LIMIT */
- pfx 1
- wrctl %g0 /* update istatus */
-
- /* Now move up the register file, saving as we go. When loop
- * is first entered, %g1 is at LO_LIMIT.
- */
-0:
- restore /* cwp++ */
- sts [%sp,0], %l0 /* Save "local" regs*/
- sts [%sp,1], %l1
- sts [%sp,2], %l2
- sts [%sp,3], %l3
- sts [%sp,4], %l4
- sts [%sp,5], %l5
- sts [%sp,6], %l6
- sts [%sp,7], %l7
-
- sts [%sp,8], %i0 /* Save 'in' regs */
- sts [%sp,9], %i1
- sts [%sp,10], %i2
- sts [%sp,11], %i3
- sts [%sp,12], %i4
- sts [%sp,13], %i5
- sts [%sp,14], %i6
- sts [%sp,15], %i7
-
- cmp %g1, %g2 /* cwp == HI_LIMIT ? */
- skps cc_ne /* if so, we're done */
- br 1f
- nop /* delay slot */
-
- inc %g1 /* g1 <- cwp++ */
- br 0b
- nop /* delay slot */
-
- /* At this point cwp = HI_LIMIT, so the global/in regs that were
- * in place when the underflow occurred must be restored using
- * the original stack pointer (saved in g6).
- */
-1:
- mov %o7, %g7 /* restore return addr */
- mov %sp, %g6 /* Restore original sp */
-
- lds %g0, [%sp,0] /* Restore 'global' regs*/
- lds %g1, [%sp,1]
- lds %g2, [%sp,2]
- lds %g3, [%sp,3]
- lds %g4, [%sp,4]
- lds %g5, [%sp,5]
- lds %g6, [%sp,6]
- lds %g7, [%sp,7]
-
- lds %i0, [%sp,8] /* Restore 'in' regs*/
- lds %i1, [%sp,9]
- lds %i2, [%sp,10]
- lds %i3, [%sp,11]
- lds %i4, [%sp,12]
- lds %i5, [%sp,13]
- lds %i6, [%sp,14]
- lds %i7, [%sp,15]
-
- tret %o7 /* All done */
-
-/*************************************************************************
- * Register window overflow
- *
- * The register window overflow exception occurs whenever the highest
- * valid register window is in use (cwp = HI_LIMIT) and a restore
- * instruction is issued. Control is transferred to the overflow handler
- * before the instruction following restore is executed.
- *
- * When a register window overflow exception is taken, the exception
- * handler sees cwp at HI_LIMIT.
- ************************************************************************/
- .text
- .global _cwp_hilimit
- .align 4
-
-_cwp_hilimit:
-
- /* Save 'global'/'in' regs on the stack -- will restore when cwp
- * is at LO_LIMIT. Locals don't need saving as they are going away.
- */
- sts [%sp,0], %g0 /* Save "global" regs*/
- sts [%sp,1], %g1
- sts [%sp,2], %g2
- sts [%sp,3], %g3
- sts [%sp,4], %g4
- sts [%sp,5], %g5
- sts [%sp,6], %g6
- sts [%sp,7], %g7
-
- sts [%sp,8], %i0 /* Save 'in' regs */
- sts [%sp,9], %i1
- sts [%sp,10], %i2
- sts [%sp,11], %i3
- sts [%sp,12], %i4
- sts [%sp,13], %i5
- sts [%sp,14], %i6
- sts [%sp,15], %i7
-
- /* The current %sp must be available in global to restore regs
- * saved on stack. Need return addr as well ;-)
- */
- mov %g7, %o7
- mov %g6, %sp
-
- /* Get HI_LIMIT & LO_LIMIT
- */
- pfx 2 /* WVALID */
- rdctl %g1
- mov %g2, %g1
- pfx 0
- and %g1, 0x1f /* g1 <- LO_LIMIT */
- lsri %g2, 5
- pfx 0
- and %g2,0x1f /* g2 <- HI_LIMIT */
-
- /* Set istatus so cwp = LO_LIMIT after tret
- */
- movi %g5, 0x1f
- lsli %g5, 4
- not %g5 /* mask to clr cwp */
- pfx 1 /* istatus */
- rdctl %g0
- and %g0, %g5 /* clear cwp field */
-
- mov %g4, %g1 /* g4 <- LO_LIMIT */
- lsli %g4, 4
- or %g0, %g4 /* cwp = LO_LIMIT */
- pfx 1
- wrctl %g0 /* update istatus */
-
- /* Move to cwp = LO_LIMIT-1 and restore 'in' regs.
- */
- subi %g4,(1 << 4) /* g4 <- LO_LIMIT - 1 */
- rdctl %g0
- and %g0, %g5 /* clear cwp field */
- or %g0, %g4 /* cwp = LO_LIMIT - 1 */
- wrctl %g0 /* update status */
- nop
-
- mov %sp, %g6 /* Restore sp */
- lds %i0, [%sp,8] /* Restore 'in' regs */
- lds %i1, [%sp,9]
- lds %i2, [%sp,10]
- lds %i3, [%sp,11]
- lds %i4, [%sp,12]
- lds %i5, [%sp,13]
- lds %i6, [%sp,14] /* sp in next window */
- lds %i7, [%sp,15]
-
- /* Starting at LO_LIMIT-1, move up the register file, restoring
- * along the way.
- */
-0:
- restore /* cwp++ */
- lds %l0, [%sp,0] /* Restore 'local' regs*/
- lds %l1, [%sp,1]
- lds %l2, [%sp,2]
- lds %l3, [%sp,3]
- lds %l4, [%sp,4]
- lds %l5, [%sp,5]
- lds %l6, [%sp,6]
- lds %l7, [%sp,7]
-
- lds %i0, [%sp,8] /* Restore 'in' regs */
- lds %i1, [%sp,9]
- lds %i2, [%sp,10]
- lds %i3, [%sp,11]
- lds %i4, [%sp,12]
- lds %i5, [%sp,13]
- lds %i6, [%sp,14] /* sp in next window */
- lds %i7, [%sp,15]
-
- cmp %g1, %g2 /* cwp == HI_LIMIT ? */
- skps cc_ne /* if so, we're done */
- br 1f
- nop /* delay slot */
-
- inc %g1 /* cwp++ */
- br 0b
- nop /* delay slot */
-
- /* All windows have been updated at this point, but the globals
- * still need to be restored. Go to cwp = LO_LIMIT-1 to get
- * some registers to use.
- */
-1:
- rdctl %g0
- and %g0, %g5 /* clear cwp field */
- or %g0, %g4 /* cwp = LO_LIMIT - 1 */
- wrctl %g0 /* update status */
- nop
-
- /* Now there are some registers available to use in restoring
- * the globals.
- */
- mov %sp, %g6
- mov %o7, %g7
-
- lds %g0, [%sp,0] /* Restore "global" regs*/
- lds %g1, [%sp,1]
- lds %g2, [%sp,2]
- lds %g3, [%sp,3]
- lds %g4, [%sp,4]
- lds %g5, [%sp,5]
- lds %g6, [%sp,6]
- lds %g7, [%sp,7]
-
- /* The tret moves istatus -> status. istatus was already set for
- * cwp = LO_LIMIT.
- */
-
- tret %o7 /* done */
-
-/*************************************************************************
- * Default exception handler
- *
- * The default handler passes control to external_interrupt(). So trap
- * or hardware interrupt hanlders can be installed using the familiar
- * irq_install_handler().
- *
- * Here, the stack is fixed-up and cwp is incremented prior to calling
- * external_interrupt(). This lets the underflow and overflow handlers
- * operate normally during the exception.
- ************************************************************************/
- .text
- .global _def_xhandler
- .align 4
-
-_def_xhandler:
-
- /* Allocate some stack space: 16 words at %sp to accomodate
- * a reg window underflow, 8 words to save interrupted task's
- * 'out' regs (which are now the 'in' regs), 8 words to preserve
- * the 'global' regs and 3 words to save the return address,
- * status and istatus. istatus must be saved in the event an
- * underflow occurs in a dispatched handler. status is saved so
- * a handler can access it on stack.
- */
- pfx %hi((16+16+3) * 4)
- subi %fp, %lo((16+16+3) * 4)
- mov %sp, %fp
-
- /* Save the 'global' regs and the interrupted task's 'out' regs
- * (our 'in' regs) along with the return addr, status & istatus.
- * First 16 words are for underflow exception.
- */
- rdctl %l0 /* status */
- pfx 1 /* istatus */
- rdctl %l1
-
- sts [%sp,16+0], %g0 /* Save 'global' regs*/
- sts [%sp,16+1], %g1
- sts [%sp,16+2], %g2
- sts [%sp,16+3], %g3
- sts [%sp,16+4], %g4
- sts [%sp,16+5], %g5
- sts [%sp,16+6], %g6
- sts [%sp,16+7], %g7
-
- sts [%sp,16+8], %i0 /* Save 'in' regs */
- sts [%sp,16+9], %i1
- sts [%sp,16+10], %i2
- sts [%sp,16+11], %i3
- sts [%sp,16+12], %i4
- sts [%sp,16+13], %i5
- sts [%sp,16+14], %i6
- sts [%sp,16+15], %i7
-
- sts [%sp,16+16], %l0 /* status */
- sts [%sp,16+17], %l1 /* istatus */
- sts [%sp,16+18], %o7 /* return addr */
-
- /* Move to cwp+1 ... this guarantees cwp is at or above LO_LIMIT.
- * Need to set IPRI=3 and IE=1 to enable underflow exceptions.
- * NOTE: only the 'out' regs have been saved ... can't touch
- * the 'in' or 'local' here.
- */
- restore /* cwp++ */
- rdctl %o0 /* o0 <- status */
-
- pfx %hi(0x7e00)
- movi %o1, %lo(0x7e00)
- not %o1
- and %o0, %o1 /* clear IPRI */
-
- pfx %hi(0x8600)
- movi %o1, %lo(0x8600)
- or %o0, %o1 /* IPRI=3, IE=1 */
-
- wrctl %o0 /* o0 -> status */
- nop
-
- /* It's ok to call a C routine now since cwp >= LO_LIMIT,
- * interrupt task's registers are/will be preserved, and
- * underflow exceptions can be handled.
- */
- pfx %hi(external_interrupt@h)
- movi %o1, %lo(external_interrupt@h)
- pfx %xhi(external_interrupt@h)
- movhi %o1, %xlo(external_interrupt@h)
- bgen %o0, 4+2 /* 16 * 4 */
- add %o0, %sp /* Ptr to regs */
- call %o1
- nop
-
- /* Move back to the exception register window, restore the 'out'
- * registers, then return from exception.
- */
- rdctl %o0 /* o0 <- status */
- subi %o0, 16
- wrctl %o0 /* cwp-- */
- nop
-
- mov %sp, %fp
- lds %g0, [%sp,16+0] /* Restore 'global' regs*/
- lds %g1, [%sp,16+1]
- lds %g2, [%sp,16+2]
- lds %g3, [%sp,16+3]
- lds %g4, [%sp,16+4]
- lds %g5, [%sp,16+5]
- lds %g6, [%sp,16+6]
- lds %g7, [%sp,16+7]
-
- lds %i0, [%sp,16+8] /* Restore 'in' regs*/
- lds %i1, [%sp,16+9]
- lds %i2, [%sp,16+10]
- lds %i3, [%sp,16+11]
- lds %i4, [%sp,16+12]
- lds %i5, [%sp,16+13]
- lds %i6, [%sp,16+14]
- lds %i7, [%sp,16+15]
-
- lds %l0, [%sp,16+16] /* status */
- lds %l1, [%sp,16+17] /* istatus */
- lds %o7, [%sp,16+18] /* return addr */
-
- pfx 1
- wrctl %l1 /* restore istatus */
-
- pfx %hi((16+16+3) * 4)
- addi %sp, %lo((16+16+3) * 4)
- mov %fp, %sp
-
- tret %o7 /* Done */
-
-
-/*************************************************************************
- * Timebase Timer Interrupt -- This has identical structure to above,
- * but calls timer_interrupt(). Doing it this way keeps things similar
- * to other architectures (e.g. ppc).
- ************************************************************************/
- .text
- .global _timebase_int
- .align 4
-
-_timebase_int:
-
- /* Allocate stack space.
- */
- pfx %hi((16+16+3) * 4)
- subi %fp, %lo((16+16+3) * 4)
- mov %sp, %fp
-
- /* Save the 'global' regs & 'out' regs (our 'in' regs)
- */
- rdctl %l0 /* status */
- pfx 1 /* istatus */
- rdctl %l1
-
- sts [%sp,16+0], %g0 /* Save 'global' regs*/
- sts [%sp,16+1], %g1
- sts [%sp,16+2], %g2
- sts [%sp,16+3], %g3
- sts [%sp,16+4], %g4
- sts [%sp,16+5], %g5
- sts [%sp,16+6], %g6
- sts [%sp,16+7], %g7
-
- sts [%sp,16+8], %i0 /* Save 'in' regs */
- sts [%sp,16+9], %i1
- sts [%sp,16+10], %i2
- sts [%sp,16+11], %i3
- sts [%sp,16+12], %i4
- sts [%sp,16+13], %i5
- sts [%sp,16+14], %i6
- sts [%sp,16+15], %i7
-
- sts [%sp,16+16], %l0 /* status */
- sts [%sp,16+17], %l1 /* istatus */
- sts [%sp,16+18], %o7 /* return addr */
-
- /* Move to cwp+1.
- */
- restore /* cwp++ */
- rdctl %o0 /* o0 <- status */
-
- pfx %hi(0x7e00)
- movi %o1, %lo(0x7e00)
- not %o1
- and %o0, %o1 /* clear IPRI */
-
- pfx %hi(0x8600)
- movi %o1, %lo(0x8600)
- or %o0, %o1 /* IPRI=3, IE=1 */
-
- wrctl %o0 /* o0 -> status */
- nop
-
- /* Call timer_interrupt()
- */
- pfx %hi(timer_interrupt@h)
- movi %o1, %lo(timer_interrupt@h)
- pfx %xhi(timer_interrupt@h)
- movhi %o1, %xlo(timer_interrupt@h)
- bgen %o0, 4+2 /* 16 * 4 */
- add %o0, %sp /* Ptr to regs */
- call %o1
- nop
-
- /* Move back to the exception register window, restore the 'out'
- * registers, then return from exception.
- */
- rdctl %o0 /* o0 <- status */
- subi %o0, 16
- wrctl %o0 /* cwp-- */
- nop
-
- mov %sp, %fp
- lds %g0, [%sp,16+0] /* Restore 'global' regs*/
- lds %g1, [%sp,16+1]
- lds %g2, [%sp,16+2]
- lds %g3, [%sp,16+3]
- lds %g4, [%sp,16+4]
- lds %g5, [%sp,16+5]
- lds %g6, [%sp,16+6]
- lds %g7, [%sp,16+7]
-
- lds %i0, [%sp,16+8] /* Restore 'in' regs*/
- lds %i1, [%sp,16+9]
- lds %i2, [%sp,16+10]
- lds %i3, [%sp,16+11]
- lds %i4, [%sp,16+12]
- lds %i5, [%sp,16+13]
- lds %i6, [%sp,16+14]
- lds %i7, [%sp,16+15]
-
- lds %l0, [%sp,16+16] /* status */
- lds %l1, [%sp,16+17] /* istatus */
- lds %o7, [%sp,16+18] /* return addr */
-
- pfx 1
- wrctl %l1 /* restore istatus */
-
- pfx %hi((16+16+3) * 4)
- addi %sp, %lo((16+16+3) * 4)
- mov %fp, %sp
-
- tret %o7 /* Done */
-
-/*************************************************************************
- * GDB stubs
- ************************************************************************/
- .text
- .global _brkpt_hw_int, _brkpt_sw_int
- .align 4
-
-_brkpt_hw_int:
- movi %l1, 9
- pfx 3
- wrctl %l1
- pfx 4
- wrctl %l1
-
-_brkpt_sw_int:
- movi %l1, 9
- pfx 3
- wrctl %l1
- pfx 4
- wrctl %l1
-
- tret %o7
diff --git a/arch/nios/include/asm/bitops.h b/arch/nios/include/asm/bitops.h
deleted file mode 100644
index 0be74f4..0000000
--- a/arch/nios/include/asm/bitops.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _ASM_NIOS_BITOPS_H_
-#define _ASM_NIOS_BITOPS_H_
-
-
-extern void set_bit(int nr, volatile void * a);
-extern void clear_bit(int nr, volatile void * a);
-extern int test_and_clear_bit(int nr, volatile void * a);
-extern void change_bit(unsigned long nr, volatile void *addr);
-extern int test_and_set_bit(int nr, volatile void * a);
-extern int test_and_change_bit(int nr, volatile void * addr);
-extern int test_bit(int nr, volatile void * a);
-extern int ffs(int i);
-#define PLATFORM_FFS
-
-#endif /* _ASM_NIOS_BITOPS_H */
diff --git a/arch/nios/include/asm/byteorder.h b/arch/nios/include/asm/byteorder.h
deleted file mode 100644
index dc71021..0000000
--- a/arch/nios/include/asm/byteorder.h
+++ /dev/null
@@ -1,30 +0,0 @@
-/*
-* (C) Copyright 2003, Psyent Corporation <www.psyent.com>
-* Scott McNutt <smcnutt@psyent.com>
-*
-* See file CREDITS for list of people who contributed to this
-* project.
-*
-* This program is free software; you can redistribute it and/or
-* modify it under the terms of the GNU General Public License as
-* published by the Free Software Foundation; either version 2 of
-* the License, or (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-* MA 02111-1307 USA
-*/
-
-#ifndef __ASM_NIOS_BYTEORDER_H
-#define __ASM_NIOS_BYTEORDER_H
-
-#include <asm/types.h>
-#include <linux/byteorder/little_endian.h>
-
-#endif
diff --git a/arch/nios/include/asm/cache.h b/arch/nios/include/asm/cache.h
deleted file mode 100644
index 3cdb703..0000000
--- a/arch/nios/include/asm/cache.h
+++ /dev/null
@@ -1 +0,0 @@
-/*FIXME: Implement this! */
diff --git a/arch/nios/include/asm/config.h b/arch/nios/include/asm/config.h
deleted file mode 100644
index 2efe898..0000000
--- a/arch/nios/include/asm/config.h
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- * Copyright 2009 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#ifndef _ASM_CONFIG_H_
-#define _ASM_CONFIG_H_
-
-/* Relocation to SDRAM works on all NIOS boards */
-#define CONFIG_RELOC_FIXUP_WORKS
-
-#endif
diff --git a/arch/nios/include/asm/global_data.h b/arch/nios/include/asm/global_data.h
deleted file mode 100644
index fa54ee4..0000000
--- a/arch/nios/include/asm/global_data.h
+++ /dev/null
@@ -1,54 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __ASM_NIOS_GLOBALDATA_H
-#define __ASM_NIOS_GLOBALDATA_H
-
-typedef struct global_data {
- bd_t *bd;
- unsigned long flags;
- unsigned long baudrate;
- unsigned long cpu_clk; /* CPU clock in Hz! */
- unsigned long have_console; /* serial_init() was called */
- phys_size_t ram_size; /* RAM size */
- unsigned long env_addr; /* Address of Environment struct */
- unsigned long env_valid; /* Checksum of Environment valid */
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
- unsigned long post_log_word; /* Record POST activities */
- unsigned long post_init_f_time; /* When post_init_f started */
-#endif
- void **jt; /* Standalone app jump table */
-} gd_t;
-
-/* flags */
-#define GD_FLG_RELOC 0x00001 /* Code was relocated to RAM */
-#define GD_FLG_DEVINIT 0x00002 /* Devices have been initialized */
-#define GD_FLG_SILENT 0x00004 /* Silent mode */
-#define GD_FLG_POSTFAIL 0x00008 /* Critical POST test failed */
-#define GD_FLG_POSTSTOP 0x00010 /* POST seqeunce aborted */
-#define GD_FLG_LOGINIT 0x00020 /* Log Buffer has been initialized */
-#define GD_FLG_DISABLE_CONSOLE 0x00040 /* Disable console (in & out) */
-
-#define DECLARE_GLOBAL_DATA_PTR register gd_t *gd asm ("%g7")
-
-#endif /* __ASM_NIOS_GLOBALDATA_H */
diff --git a/arch/nios/include/asm/io.h b/arch/nios/include/asm/io.h
deleted file mode 100644
index 899682c..0000000
--- a/arch/nios/include/asm/io.h
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __ASM_NIOS_IO_H_
-#define __ASM_NIOS_IO_H_
-
-#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v))
-#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v))
-#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v))
-
-#define __raw_readb(a) (*(volatile unsigned char *)(a))
-#define __raw_readw(a) (*(volatile unsigned short *)(a))
-#define __raw_readl(a) (*(volatile unsigned int *)(a))
-
-#define readb(addr)\
- ({unsigned char val;\
- asm volatile( " pfxio 0 \n"\
- " ld %0, [%1] \n"\
- " ext8d %0, %1 \n"\
- :"=r"(val) : "r" (addr)); val;})
-
-#define readw(addr)\
- ({unsigned short val;\
- asm volatile( " pfxio 0 \n"\
- " ld %0, [%1] \n"\
- " ext16d %0, %1 \n"\
- :"=r"(val) : "r" (addr)); val;})
-
-#define readl(addr)\
- ({unsigned long val;\
- asm volatile( " pfxio 0 \n"\
- " ld %0, [%1] \n"\
- :"=r"(val) : "r" (addr)); val;})
-
-#define writeb(addr,val)\
- asm volatile ( " fill8 %%r0, %1 \n"\
- " st8d [%0], %%r0 \n"\
- : : "r" (addr), "r" (val) : "r0")
-
-#define writew(addr,val)\
- asm volatile ( " fill16 %%r0, %1 \n"\
- " st16d [%0], %%r0 \n"\
- : : "r" (addr), "r" (val) : "r0")
-
-#define writel(addr,val)\
- asm volatile ( " st [%0], %1 \n"\
- : : "r" (addr), "r" (val))
-
-#define inb(addr) readb(addr)
-#define inw(addr) readw(addr)
-#define inl(addr) readl(addr)
-#define outb(val,addr) writeb(addr,val)
-#define outw(val,addr) writew(addr,val)
-#define outl(val,addr) writel(addr,val)
-
-static inline void insb (unsigned long port, void *dst, unsigned long count)
-{
- unsigned char *p = dst;
- while (count--) *p++ = inb (port);
-}
-static inline void insw (unsigned long port, void *dst, unsigned long count)
-{
- unsigned short *p = dst;
- while (count--) *p++ = inw (port);
-}
-static inline void insl (unsigned long port, void *dst, unsigned long count)
-{
- unsigned long *p = dst;
- while (count--) *p++ = inl (port);
-}
-
-static inline void outsb (unsigned long port, const void *src, unsigned long count)
-{
- const unsigned char *p = src;
- while (count--) outb (*p++, port);
-}
-
-static inline void outsw (unsigned long port, const void *src, unsigned long count)
-{
- const unsigned short *p = src;
- while (count--) outw (*p++, port);
-}
-static inline void outsl (unsigned long port, const void *src, unsigned long count)
-{
- const unsigned long *p = src;
- while (count--) outl (*p++, port);
-}
-
-static inline void sync(void)
-{
-}
-
-/*
- * Given a physical address and a length, return a virtual address
- * that can be used to access the memory range with the caching
- * properties specified by "flags".
- */
-#define MAP_NOCACHE (0)
-#define MAP_WRCOMBINE (0)
-#define MAP_WRBACK (0)
-#define MAP_WRTHROUGH (0)
-
-static inline void *
-map_physmem(phys_addr_t paddr, unsigned long len, unsigned long flags)
-{
- return (void *)paddr;
-}
-
-/*
- * Take down a mapping set up by map_physmem().
- */
-static inline void unmap_physmem(void *vaddr, unsigned long flags)
-{
-
-}
-
-static inline phys_addr_t virt_to_phys(void * vaddr)
-{
- return (phys_addr_t)(vaddr);
-}
-
-#endif /* __ASM_NIOS_IO_H_ */
diff --git a/arch/nios/include/asm/posix_types.h b/arch/nios/include/asm/posix_types.h
deleted file mode 100644
index eb74214..0000000
--- a/arch/nios/include/asm/posix_types.h
+++ /dev/null
@@ -1,63 +0,0 @@
-#ifndef __ASM_NIOS_POSIX_TYPES_H
-#define __ASM_NIOS_POSIX_TYPES_H
-
-/*
- * This file is generally used by user-level software, so you need to
- * be a little careful about namespace pollution etc. Also, we cannot
- * assume GCC is being used.
- */
-
-typedef unsigned short __kernel_dev_t;
-typedef unsigned long __kernel_ino_t;
-typedef unsigned short __kernel_mode_t;
-typedef unsigned short __kernel_nlink_t;
-typedef long __kernel_off_t;
-typedef int __kernel_pid_t;
-typedef unsigned short __kernel_ipc_pid_t;
-typedef unsigned short __kernel_uid_t;
-typedef unsigned short __kernel_gid_t;
-typedef unsigned long __kernel_size_t;
-typedef int __kernel_ssize_t;
-typedef int __kernel_ptrdiff_t;
-typedef long __kernel_time_t;
-typedef long __kernel_suseconds_t;
-typedef long __kernel_clock_t;
-typedef int __kernel_daddr_t;
-typedef char * __kernel_caddr_t;
-typedef unsigned short __kernel_uid16_t;
-typedef unsigned short __kernel_gid16_t;
-typedef unsigned int __kernel_uid32_t;
-typedef unsigned int __kernel_gid32_t;
-
-typedef unsigned short __kernel_old_uid_t;
-typedef unsigned short __kernel_old_gid_t;
-
-#ifdef __GNUC__
-typedef long long __kernel_loff_t;
-#endif
-
-typedef struct {
-#if defined(__KERNEL__) || defined(__USE_ALL)
- int val[2];
-#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */
- int __val[2];
-#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */
-} __kernel_fsid_t;
-
-#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2)
-
-#undef __FD_SET
-#define __FD_SET(d, set) ((set)->fds_bits[__FDELT(d)] |= __FDMASK(d))
-
-#undef __FD_CLR
-#define __FD_CLR(d, set) ((set)->fds_bits[__FDELT(d)] &= ~__FDMASK(d))
-
-#undef __FD_ISSET
-#define __FD_ISSET(d, set) ((set)->fds_bits[__FDELT(d)] & __FDMASK(d))
-
-#undef __FD_ZERO
-#define __FD_ZERO(fdsetp) (memset (fdsetp, 0, sizeof(*(fd_set *)fdsetp)))
-
-#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */
-
-#endif
diff --git a/arch/nios/include/asm/processor.h b/arch/nios/include/asm/processor.h
deleted file mode 100644
index 78b8976..0000000
--- a/arch/nios/include/asm/processor.h
+++ /dev/null
@@ -1 +0,0 @@
-/* FIXME: Implement this! */
diff --git a/arch/nios/include/asm/psr.h b/arch/nios/include/asm/psr.h
deleted file mode 100644
index 6e8eba8..0000000
--- a/arch/nios/include/asm/psr.h
+++ /dev/null
@@ -1,28 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _NIOS_PSR_H
-#define _NIOS_PSR_H
-
-
-#endif /* _NIOS_PSR_H */
diff --git a/arch/nios/include/asm/ptrace.h b/arch/nios/include/asm/ptrace.h
deleted file mode 100644
index 73754c8..0000000
--- a/arch/nios/include/asm/ptrace.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef _NIOS_PTRACE_H
-#define _NIOS_PTRACE_H
-
-struct pt_regs {
- unsigned global[8];
- unsigned in[8];
- unsigned status;
- unsigned istatus;
- unsigned retaddr;
-};
-
-
-#endif /* _NIOS_PTRACE_H */
diff --git a/arch/nios/include/asm/status_led.h b/arch/nios/include/asm/status_led.h
deleted file mode 100644
index 241c917..0000000
--- a/arch/nios/include/asm/status_led.h
+++ /dev/null
@@ -1,132 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * asm-nios/status_led.h
- *
- * NIOS PIO based status led support functions
- */
-
-#ifndef __ASM_STATUS_LED_H__
-#define __ASM_STATUS_LED_H__
-
-#include <nios-io.h>
-
-/* led_id_t is unsigned int mask */
-typedef unsigned int led_id_t;
-
-#ifdef STATUS_LED_WRONLY /* emulate read access */
-static led_id_t __led_portval = 0;
-#endif
-
-static inline void __led_init (led_id_t mask, int state)
-{
- nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
-
-#ifdef STATUS_LED_WRONLY /* emulate read access */
-
-#if (STATUS_LED_ACTIVE == 0)
- if (state == STATUS_LED_ON)
- __led_portval &= ~mask;
- else
- __led_portval |= mask;
-#else
- if (state == STATUS_LED_ON)
- __led_portval |= mask;
- else
- __led_portval &= ~mask;
-#endif
-
- piop->data = __led_portval;
-
-#else /* !STATUS_LED_WRONLY */
-
-#if (STATUS_LED_ACTIVE == 0)
- if (state == STATUS_LED_ON)
- piop->data &= ~mask;
- else
- piop->data |= mask;
-#else
- if (state == STATUS_LED_ON)
- piop->data |= mask;
- else
- piop->data &= ~mask;
-#endif
-
- piop->direction |= mask;
-
-#endif /* STATUS_LED_WRONLY */
-}
-
-static inline void __led_toggle (led_id_t mask)
-{
- nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
-
-#ifdef STATUS_LED_WRONLY /* emulate read access */
-
- __led_portval ^= mask;
- piop->data = __led_portval;
-
-#else /* !STATUS_LED_WRONLY */
-
- piop->data ^= mask;
-
-#endif /* STATUS_LED_WRONLY */
-}
-
-static inline void __led_set (led_id_t mask, int state)
-{
- nios_pio_t *piop = (nios_pio_t*)STATUS_LED_BASE;
-
-#ifdef STATUS_LED_WRONLY /* emulate read access */
-
-#if (STATUS_LED_ACTIVE == 0)
- if (state == STATUS_LED_ON)
- __led_portval &= ~mask;
- else
- __led_portval |= mask;
-#else
- if (state == STATUS_LED_ON)
- __led_portval |= mask;
- else
- __led_portval &= ~mask;
-#endif
-
- piop->data = __led_portval;
-
-#else /* !STATUS_LED_WRONLY */
-
-#if (STATUS_LED_ACTIVE == 0)
- if (state == STATUS_LED_ON)
- piop->data &= ~mask;
- else
- piop->data |= mask;
-#else
- if (state == STATUS_LED_ON)
- piop->data |= mask;
- else
- piop->data &= ~mask;
-#endif
-
-#endif /* STATUS_LED_WRONLY */
-}
-
-#endif /* __ASM_STATUS_LED_H__ */
diff --git a/arch/nios/include/asm/string.h b/arch/nios/include/asm/string.h
deleted file mode 100644
index fa33275..0000000
--- a/arch/nios/include/asm/string.h
+++ /dev/null
@@ -1,25 +0,0 @@
-#ifndef __ASM_NIOS_STRING_H
-#define __ASM_NIOS_STRING_H
-
-#undef __HAVE_ARCH_STRRCHR
-extern char * strrchr(const char * s, int c);
-
-#undef __HAVE_ARCH_STRCHR
-extern char * strchr(const char * s, int c);
-
-#undef __HAVE_ARCH_MEMCPY
-extern void * memcpy(void *, const void *, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMMOVE
-extern void * memmove(void *, const void *, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMCHR
-extern void * memchr(const void *, int, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMSET
-extern void * memset(void *, int, __kernel_size_t);
-
-#undef __HAVE_ARCH_MEMZERO
-extern void memzero(void *ptr, __kernel_size_t n);
-
-#endif
diff --git a/arch/nios/include/asm/system.h b/arch/nios/include/asm/system.h
deleted file mode 100644
index 9a9383d..0000000
--- a/arch/nios/include/asm/system.h
+++ /dev/null
@@ -1,4 +0,0 @@
-#ifndef _ASM_NIOS_SYSTEM_H_
-#define _ASM_NIOS_SYSTEM_H_
-
-#endif /* _ASM_NIOS_SYSTEM_H */
diff --git a/arch/nios/include/asm/types.h b/arch/nios/include/asm/types.h
deleted file mode 100644
index 636e12f..0000000
--- a/arch/nios/include/asm/types.h
+++ /dev/null
@@ -1,60 +0,0 @@
-#ifndef _NIOS_TYPES_H
-#define _NIOS_TYPES_H
-
-/*
- * This file is never included by application software unless
- * explicitly requested (e.g., via linux/types.h) in which case the
- * application is Linux specific so (user-) name space pollution is
- * not a major issue. However, for interoperability, libraries still
- * need to be careful to avoid a name clashes.
- */
-
-typedef unsigned short umode_t;
-
-/*
- * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the
- * header files exported to user space
- */
-
-typedef __signed__ char __s8;
-typedef unsigned char __u8;
-
-typedef __signed__ short __s16;
-typedef unsigned short __u16;
-
-typedef __signed__ int __s32;
-typedef unsigned int __u32;
-
-#if defined(__GNUC__)
-__extension__ typedef __signed__ long long __s64;
-__extension__ typedef unsigned long long __u64;
-#endif
-
-/*
- * These aren't exported outside the kernel to avoid name space clashes
- */
-#ifdef __KERNEL__
-
-typedef signed char s8;
-typedef unsigned char u8;
-
-typedef signed short s16;
-typedef unsigned short u16;
-
-typedef signed int s32;
-typedef unsigned int u32;
-
-typedef signed long long s64;
-typedef unsigned long long u64;
-
-#define BITS_PER_LONG 32
-
-/* Dma addresses are 32-bits wide. */
-
-typedef u32 dma_addr_t;
-
-typedef unsigned long phys_addr_t;
-typedef unsigned long phys_size_t;
-#endif /* __KERNEL__ */
-
-#endif /* _NIOS_TYPES_H */
diff --git a/arch/nios/include/asm/u-boot.h b/arch/nios/include/asm/u-boot.h
deleted file mode 100644
index bdb6cf2..0000000
--- a/arch/nios/include/asm/u-boot.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * (C) Copyright 2003
- * Psyent Corporation
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- ********************************************************************
- * NOTE: This header file defines an interface to U-Boot. Including
- * this (unmodified) header file in another file is considered normal
- * use of U-Boot, and does *not* fall under the heading of "derived
- * work".
- ********************************************************************
- */
-
-#ifndef _U_BOOT_H_
-#define _U_BOOT_H_
-
-typedef struct bd_info {
- unsigned long bi_memstart; /* start of DRAM memory */
- phys_size_t bi_memsize; /* size of DRAM memory in bytes */
- unsigned long bi_flashstart; /* start of FLASH memory */
- unsigned long bi_flashsize; /* size of FLASH memory */
- unsigned long bi_flashoffset; /* reserved area for startup monitor */
- unsigned long bi_sramstart; /* start of SRAM memory */
- unsigned long bi_sramsize; /* size of SRAM memory */
- unsigned long bi_ip_addr; /* IP Address */
- unsigned long bi_baudrate; /* Console Baudrate */
-} bd_t;
-
-
-#endif /* _U_BOOT_H_ */
diff --git a/arch/nios/lib/Makefile b/arch/nios/lib/Makefile
deleted file mode 100644
index f66e989..0000000
--- a/arch/nios/lib/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(ARCH).a
-
-SOBJS-y +=
-
-COBJS-y += board.o
-COBJS-y += bootm.o
-COBJS-y += cache.o
-COBJS-y += divmod.o
-COBJS-y += mult.o
-COBJS-y += time.o
-
-SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
-
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/nios/lib/board.c b/arch/nios/lib/board.c
deleted file mode 100644
index 5d2fb2e..0000000
--- a/arch/nios/lib/board.c
+++ /dev/null
@@ -1,168 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * (C) Copyright 2000-2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <stdio_dev.h>
-#include <watchdog.h>
-#include <malloc.h>
-#include <net.h>
-#ifdef CONFIG_STATUS_LED
-#include <status_led.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/*
- * All attempts to come up with a "common" initialization sequence
- * that works for all boards and architectures failed: some of the
- * requirements are just _too_ different. To get rid of the resulting
- * mess of board dependend #ifdef'ed code we now make the whole
- * initialization sequence configurable to the user.
- *
- * The requirements for any new initalization function is simple: it
- * receives a pointer to the "global data" structure as it's only
- * argument, and returns an integer return code, where 0 means
- * "continue" and != 0 means "fatal error, hang the system".
- */
-
-
-typedef int (init_fnc_t) (void);
-
-
-/************************************************************************
- * Initialization sequence *
- ***********************************************************************/
-
-init_fnc_t *init_sequence[] = {
-
-#if defined(CONFIG_BOARD_EARLY_INIT_F)
- board_early_init_f, /* Call board-specific init code early.*/
-#endif
-
- env_init,
- serial_init,
- console_init_f,
- display_options,
- checkcpu,
- checkboard,
- NULL, /* Terminate this list */
-};
-
-
-/***********************************************************************/
-void board_init (void)
-{
- bd_t *bd;
- init_fnc_t **init_fnc_ptr;
- char *s, *e;
- int i;
-
- /* Pointer is writable since we allocated a register for it.
- * Nios treats CONFIG_SYS_GBL_DATA_OFFSET as an address.
- */
- gd = (gd_t *)CONFIG_SYS_GBL_DATA_OFFSET;
- /* compiler optimization barrier needed for GCC >= 3.4 */
- __asm__ __volatile__("": : :"memory");
-
- memset( gd, 0, CONFIG_SYS_GBL_DATA_SIZE );
-
- gd->bd = (bd_t *)(gd+1); /* At end of global data */
- gd->baudrate = CONFIG_BAUDRATE;
- gd->cpu_clk = CONFIG_SYS_CLK_FREQ;
-
- bd = gd->bd;
- bd->bi_memstart = CONFIG_SYS_SDRAM_BASE;
- bd->bi_memsize = CONFIG_SYS_SDRAM_SIZE;
- bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
-#if defined(CONFIG_SYS_SRAM_BASE) && defined(CONFIG_SYS_SRAM_SIZE)
- bd->bi_sramstart= CONFIG_SYS_SRAM_BASE;
- bd->bi_sramsize = CONFIG_SYS_SRAM_SIZE;
-#endif
- bd->bi_baudrate = CONFIG_BAUDRATE;
-
- for (init_fnc_ptr = init_sequence; *init_fnc_ptr; ++init_fnc_ptr) {
- WATCHDOG_RESET ();
- if ((*init_fnc_ptr) () != 0) {
- hang ();
- }
- }
-
- WATCHDOG_RESET ();
-
- /* The Malloc area is immediately below the monitor copy in RAM */
- mem_malloc_init(CONFIG_SYS_MALLOC_BASE, CONFIG_SYS_MALLOC_LEN);
-
- WATCHDOG_RESET ();
- bd->bi_flashsize = flash_init();
-
- WATCHDOG_RESET ();
- env_relocate();
-
- bd->bi_ip_addr = getenv_IPaddr ("ipaddr");
-
- WATCHDOG_RESET ();
- stdio_init();
- jumptable_init();
- console_init_r();
- /*
- */
-
- WATCHDOG_RESET ();
- interrupt_init ();
-
-#ifdef CONFIG_STATUS_LED
- status_led_set(STATUS_LED_BOOT, STATUS_LED_BLINKING);
-#endif
-
- /* main_loop */
- for (;;) {
- WATCHDOG_RESET ();
- main_loop ();
- }
-}
-
-
-/***********************************************************************/
-
-void hang (void)
-{
-#ifdef CONFIG_STATUS_LED
- status_led_set(STATUS_LED_BOOT, STATUS_LED_OFF);
- status_led_set(STATUS_LED_RED, STATUS_LED_BLINKING);
-#endif
- puts("### ERROR ### Please reset board ###\n");
- for (;;);
-}
-
-unsigned long do_go_exec (ulong (*entry)(int, char *[]), int argc, char *argv[])
-{
- /*
- * x86 does not use a dedicated register to pass the pointer
- * to the global_data
- */
- argv[-1] = (char *)gd;
- return entry (argc, argv);
-}
diff --git a/arch/nios/lib/bootm.c b/arch/nios/lib/bootm.c
deleted file mode 100644
index b0d5b82..0000000
--- a/arch/nios/lib/bootm.c
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-
-/* FIXME: Once we find a stable version of uC-linux for nios
- * we can get this working. ;-)
- *
- */
-int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
-{
- return 1;
-}
diff --git a/arch/nios/lib/cache.c b/arch/nios/lib/cache.c
deleted file mode 100644
index 87dbab1..0000000
--- a/arch/nios/lib/cache.c
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-
-void flush_cache (ulong addr, ulong size)
-{
- /* Nios cache is write-thru -- nothing to do here.
- */
- return;
-}
diff --git a/arch/nios/lib/divmod.c b/arch/nios/lib/divmod.c
deleted file mode 100644
index 3c7e71e..0000000
--- a/arch/nios/lib/divmod.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * This file is part of GNU CC.
- *
- * GNU CC is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published
- * by the Free Software Foundation; either version 2, or (at your
- * option) any later version.
- *
- * GNU CC is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with GNU CC; see the file COPYING. If not, write
- * to the Free Software Foundation, 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA.
- */
-
-
-#include "math.h"
-
-USItype udivmodsi4 (USItype num, USItype den, word_type modwanted)
-{
- USItype bit = 1;
- USItype res = 0;
-
- while (den < num && bit && !(den & (1L << 31))) {
- den <<= 1;
- bit <<= 1;
- }
- while (bit) {
- if (num >= den) {
- num -= den;
- res |= bit;
- }
- bit >>= 1;
- den >>= 1;
- }
- if (modwanted)
- return num;
- return res;
-}
-
-
-SItype __divsi3 (SItype a, SItype b)
-{
- word_type neg = 0;
- SItype res;
-
- if (a < 0) {
- a = -a;
- neg = !neg;
- }
-
- if (b < 0) {
- b = -b;
- neg = !neg;
- }
-
- res = udivmodsi4 (a, b, 0);
-
- if (neg)
- res = -res;
-
- return res;
-}
-
-
-SItype __modsi3 (SItype a, SItype b)
-{
- word_type neg = 0;
- SItype res;
-
- if (a < 0) {
- a = -a;
- neg = 1;
- }
-
- if (b < 0)
- b = -b;
-
- res = udivmodsi4 (a, b, 1);
-
- if (neg)
- res = -res;
-
- return res;
-}
-
-
-SItype __udivsi3 (SItype a, SItype b)
-{
- return udivmodsi4 (a, b, 0);
-}
-
-
-SItype __umodsi3 (SItype a, SItype b)
-{
- return udivmodsi4 (a, b, 1);
-}
diff --git a/arch/nios/lib/math.h b/arch/nios/lib/math.h
deleted file mode 100644
index f0aed8e..0000000
--- a/arch/nios/lib/math.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#define BITS_PER_UNIT 8
-
-typedef int HItype __attribute__ ((mode (HI)));
-typedef unsigned int UHItype __attribute__ ((mode (HI)));
-
-typedef int SItype __attribute__ ((mode (SI)));
-typedef unsigned int USItype __attribute__ ((mode (SI)));
-
-typedef int word_type __attribute__ ((mode (__word__)));
-
-struct SIstruct {HItype low, high;};
-
-typedef union {
- struct SIstruct s;
- SItype ll;
-} SIunion;
diff --git a/arch/nios/lib/mult.c b/arch/nios/lib/mult.c
deleted file mode 100644
index ec8139e..0000000
--- a/arch/nios/lib/mult.c
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This file is part of GNU CC.
- *
- * GNU CC is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published
- * by the Free Software Foundation; either version 2, or (at your
- * option) any later version.
- *
- * GNU CC is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with GNU CC; see the file COPYING. If not, write
- * to the Free Software Foundation, 59 Temple Place - Suite 330,
- * Boston, MA 02111-1307, USA.
- */
-
-
-#include <common.h>
-
-#if !defined(CONFIG_SYS_NIOS_MULT_HW) && !defined(CONFIG_SYS_NIOS_MULT_MSTEP)
-
-#include "math.h"
-
-USItype __mulsi3 (USItype a, USItype b)
-{
- USItype c = 0;
-
- while (a != 0) {
- if (a & 1)
- c += b;
- a >>= 1;
- b <<= 1;
- }
-
- return c;
-}
-
-
-UHItype __mulhi3 (UHItype a, UHItype b)
-{
- UHItype c = 0;
-
- while (a != 0) {
- if (a & 1)
- c += b;
- a >>= 1;
- b <<= 1;
- }
-
- return c;
-}
-
-#endif /*!defined(CONFIG_SYS_NIOS_MULT_HW) && !defined(CONFIG_SYS_NIOS_MULT_MSTEP) */
diff --git a/arch/nios/lib/time.c b/arch/nios/lib/time.c
deleted file mode 100644
index d5096ee..0000000
--- a/arch/nios/lib/time.c
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-
-
-extern void dly_clks( unsigned long ticks );
-
-void __udelay(unsigned long usec)
-{
- /* The Nios core doesn't have a timebase, so we do our
- * best for now and call a low-level loop that counts
- * cpu clocks.
- */
- unsigned long cnt = (CONFIG_SYS_CLK_FREQ/1000000) * usec;
- dly_clks (cnt);
-}
diff --git a/board/altera/dk1c20/Makefile b/board/altera/dk1c20/Makefile
deleted file mode 100644
index 60ac6e6..0000000
--- a/board/altera/dk1c20/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS := $(BOARD).o flash.o misc.o
-SOBJS = vectors.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/altera/dk1c20/config.mk b/board/altera/dk1c20/config.mk
deleted file mode 100644
index d200715..0000000
--- a/board/altera/dk1c20/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2003
-# Psyent Corporation
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x018c0000
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/altera/dk1c20/dk1c20.c b/board/altera/dk1c20/dk1c20.c
deleted file mode 100644
index 0bcaa4f..0000000
--- a/board/altera/dk1c20/dk1c20.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * CompactFlash/IDE:
- * (C) Copyright 2004, Shlomo Kut <skut@vyyo.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <nios-io.h>
-#if defined(CONFIG_SEVENSEG)
-#include "../common/sevenseg.h"
-#endif
-
-void _default_hdlr (void)
-{
- printf ("default_hdlr\n");
-}
-
-int board_early_init_f (void)
-{
-#if defined(CONFIG_SEVENSEG)
- /* init seven segment led display and switch off */
- sevenseg_set(SEVENSEG_OFF);
-#endif
- return 0;
-}
-
-int checkboard (void)
-{
- puts ("Board: Altera Nios 1C20 Development Kit\n");
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return (0);
-}
-
-#if defined(CONFIG_CMD_IDE)
-int ide_preinit (void)
-{
- nios_pio_t *present = (nios_pio_t *) CONFIG_SYS_CF_PRESENT;
- nios_pio_t *power = (nios_pio_t *) CONFIG_SYS_CF_POWER;
- nios_pio_t *atasel = (nios_pio_t *) CONFIG_SYS_CF_ATASEL;
-
- /* setup data direction registers */
- present->direction = NIOS_PIO_IN;
- power->direction = NIOS_PIO_OUT;
- atasel->direction = NIOS_PIO_OUT;
-
- /* Check for presence of card */
- if (present->data)
- return 1;
- printf ("Ok\n");
-
- /* Finish setup */
- power->data = 1; /* Turn on power FET */
- atasel->data = 0; /* Put in ATA mode */
-
- return 0;
-}
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/altera/dk1c20/flash.c b/board/altera/dk1c20/flash.c
deleted file mode 100644
index 8bddd38..0000000
--- a/board/altera/dk1c20/flash.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <nios.h>
-
-/*
- * include common flash code (for altera boards)
- */
-#include "../common/flash.c"
-
-/*----------------------------------------------------------------------*/
-#define BANKSZ CONFIG_SYS_FLASH_SIZE
-#define SECTSZ (64 * 1024)
-#define USERFLASH (2 * 1024 * 1024) /* bottom 2 MB for user */
-
-/*----------------------------------------------------------------------*/
-unsigned long flash_init (void)
-{
- int i;
- unsigned long addr;
- flash_info_t *fli = &flash_info[0];
-
- fli->size = BANKSZ;
- fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
-
- addr = CONFIG_SYS_FLASH_BASE;
- for (i = 0; i < fli->sector_count; ++i) {
- fli->start[i] = addr;
- addr += SECTSZ;
-
- /* Protect all but 2 MByte user area */
- if (addr < (CONFIG_SYS_FLASH_BASE + USERFLASH))
- fli->protect[i] = 0;
- else
- fli->protect[i] = 1;
- }
-
- return (BANKSZ);
-}
diff --git a/board/altera/dk1c20/misc.c b/board/altera/dk1c20/misc.c
deleted file mode 100644
index f25cdeb..0000000
--- a/board/altera/dk1c20/misc.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * board/altera/dk1s10/misc.c
- *
- * miscellaneous board interfaces / drivers
- */
-
-#include <common.h>
-
-#if defined(CONFIG_SEVENSEG)
-#include "../common/sevenseg.h"
-#include "../common/sevenseg.c"
-#endif
diff --git a/board/altera/dk1c20/u-boot.lds b/board/altera/dk1c20/u-boot.lds
deleted file mode 100644
index 50c3fe7..0000000
--- a/board/altera/dk1c20/u-boot.lds
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-nios")
-OUTPUT_ARCH(nios)
-ENTRY(_start)
-
-SECTIONS
-{
- .text :
- {
- arch/nios/cpu/start.o (.text)
- *(.text)
- }
- __text_end = .;
-
- . = ALIGN(4);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- __rodata_end = .;
-
- . = ALIGN(4);
- .data :
- {
- *(.data)
- }
- . = ALIGN(4);
- __data_end = .;
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- }
- . = ALIGN(4);
- __u_boot_cmd_end = .;
-
- __bss_start = .;
- . = ALIGN(4);
- .bss (NOLOAD) :
- {
- *(.bss)
- }
- . = ALIGN(4);
- __bss_end = .;
-}
diff --git a/board/altera/dk1c20/vectors.S b/board/altera/dk1c20/vectors.S
deleted file mode 100644
index c83c0e7..0000000
--- a/board/altera/dk1c20/vectors.S
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-/*************************************************************************
- * Exception Vector Table
- *
- * This could have gone in the cpu soure tree, but the whole point of
- * Nios is customization -- and polluting the cpu source tree with
- * board-specific ifdef's really defeats the purpose, no? With this in
- * the board-specific tree, each board has the freedom to organize
- * vectors/traps, etc anyway it wants. The init code copies this table
- * to the proper location.
- *
- * Each board can do what it likes here. But there are four "standard"
- * handlers availble:
- *
- * _cwp_lolimit -Handles register window underflows.
- * _cwp_hilimit -Handles register window overflows.
- * _timebase_int -Increments the timebase.
- * _brkpt_hw_int -Hardware breakpoint handler.
- * _brkpt_sw_int -Software breakpoint handler.
- * _def_xhandler -Default exception handler.
- *
- * _timebase_int handles a Nios Timer interrupt and increments the
- * timestamp used for the get_timer(), reset_timer(), etc. routines. It
- * expects the timer to be configured like the standard-32 low priority
- * timer.
- *
- * _def_xhandler dispatches exceptions/traps via the external_interrupt()
- * routine. This lets you use the irq_install_handler() and handle your
- * interrupts/traps with code written in C.
- ************************************************************************/
-
- .data
- .global _vectors
- .align 4
-_vectors:
-
- .long _def_xhandler@h /* Vector 0 - NMI */
- .long _cwp_lolimit@h /* Vector 1 - underflow */
- .long _cwp_hilimit@h /* Vector 2 - overflow */
- .long _brkpt_hw_int@h /* Vector 3 - Breakpoint */
- .long _brkpt_sw_int@h /* Vector 4 - Single step*/
- .long _def_xhandler@h /* Vector 5 - GNUPro debug */
- .long _def_xhandler@h /* Vector 6 - future reserved */
- .long _def_xhandler@h /* Vector 7 - future reserved */
- .long _def_xhandler@h /* Vector 8 - future reserved */
- .long _def_xhandler@h /* Vector 9 - future reserved */
- .long _def_xhandler@h /* Vector 10 - future reserved */
- .long _def_xhandler@h /* Vector 11 - future reserved */
- .long _def_xhandler@h /* Vector 12 - future reserved */
- .long _def_xhandler@h /* Vector 13 - future reserved */
- .long _def_xhandler@h /* Vector 14 - future reserved */
- .long _def_xhandler@h /* Vector 15 - future reserved */
- .long _def_xhandler@h /* Vector 16 */
- .long _def_xhandler@h /* Vector 17 */
- .long _def_xhandler@h /* Vector 18 */
- .long _def_xhandler@h /* Vector 19 */
- .long _def_xhandler@h /* Vector 20 */
- .long _def_xhandler@h /* Vector 21 */
- .long _def_xhandler@h /* Vector 22 */
- .long _def_xhandler@h /* Vector 23 */
- .long _def_xhandler@h /* Vector 24 */
- .long _def_xhandler@h /* Vector 25 */
- .long _def_xhandler@h /* Vector 26 */
- .long _def_xhandler@h /* Vector 27 */
- .long _def_xhandler@h /* Vector 28 */
- .long _def_xhandler@h /* Vector 29 */
- .long _def_xhandler@h /* Vector 30 */
- .long _def_xhandler@h /* Vector 31 */
- .long _def_xhandler@h /* Vector 32 */
- .long _def_xhandler@h /* Vector 33 */
- .long _def_xhandler@h /* Vector 34 */
- .long _def_xhandler@h /* Vector 35 */
- .long _def_xhandler@h /* Vector 36 */
- .long _def_xhandler@h /* Vector 37 */
- .long _def_xhandler@h /* Vector 38 */
- .long _def_xhandler@h /* Vector 39 */
- .long _def_xhandler@h /* Vector 40 */
- .long _def_xhandler@h /* Vector 41 */
- .long _def_xhandler@h /* Vector 42 */
- .long _def_xhandler@h /* Vector 43 */
- .long _def_xhandler@h /* Vector 44 */
- .long _def_xhandler@h /* Vector 45 */
- .long _def_xhandler@h /* Vector 46 */
- .long _def_xhandler@h /* Vector 47 */
- .long _def_xhandler@h /* Vector 48 */
- .long _def_xhandler@h /* Vector 49 */
- .long _timebase_int@h /* Vector 50 - lopri timer*/
- .long _def_xhandler@h /* Vector 51 */
- .long _def_xhandler@h /* Vector 52 */
- .long _def_xhandler@h /* Vector 53 */
- .long _def_xhandler@h /* Vector 54 */
- .long _def_xhandler@h /* Vector 55 */
- .long _def_xhandler@h /* Vector 56 */
- .long _def_xhandler@h /* Vector 57 */
- .long _def_xhandler@h /* Vector 58 */
- .long _def_xhandler@h /* Vector 59 */
- .long _def_xhandler@h /* Vector 60 */
- .long _def_xhandler@h /* Vector 61 */
- .long _def_xhandler@h /* Vector 62 */
- .long _def_xhandler@h /* Vector 63 */
diff --git a/board/altera/dk1s10/Makefile b/board/altera/dk1s10/Makefile
deleted file mode 100644
index 60ac6e6..0000000
--- a/board/altera/dk1s10/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS := $(BOARD).o flash.o misc.o
-SOBJS = vectors.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/altera/dk1s10/config.mk b/board/altera/dk1s10/config.mk
deleted file mode 100644
index d200715..0000000
--- a/board/altera/dk1s10/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2003
-# Psyent Corporation
-# Scott McNutt <smcnutt@psyent.com>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x018c0000
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/altera/dk1s10/dk1s10.c b/board/altera/dk1s10/dk1s10.c
deleted file mode 100644
index fb96501..0000000
--- a/board/altera/dk1s10/dk1s10.c
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#if defined(CONFIG_SEVENSEG)
-#include "../common/sevenseg.h"
-#endif
-
-void _default_hdlr (void)
-{
- printf ("default_hdlr\n");
-}
-
-int board_early_init_f (void)
-{
-#if defined(CONFIG_SEVENSEG)
- /* init seven segment led display and switch off */
- sevenseg_set(SEVENSEG_OFF);
-#endif
- return 0;
-}
-
-int checkboard (void)
-{
- puts ("Board: Altera Nios 1S10 Development Kit\n");
-#if defined(CONFIG_NIOS_SAFE_32)
- puts ("Conf.: Altera Safe 32 (safe_32)\n");
-#elif defined(CONFIG_NIOS_STANDARD_32)
- puts ("Conf.: Altera Standard 32 (standard_32)\n");
-#elif defined(CONFIG_NIOS_MTX_LDK_20)
- puts ("Conf.: Microtronix LDK 2.0 (LDK2)\n");
-#endif
-
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return (0);
-}
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/altera/dk1s10/flash.c b/board/altera/dk1s10/flash.c
deleted file mode 100644
index d1f2db1..0000000
--- a/board/altera/dk1s10/flash.c
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <nios.h>
-
-/*
- * include common flash code (for altera boards)
- */
-#include "../common/flash.c"
-
-/*---------------------------------------------------------------------*/
-#define BANKSZ (8 * 1024 * 1024)
-#define SECTSZ (64 * 1024)
-#define USERFLASH (2 * 1024 * 1024) /* bottom 2 MB for user */
-
-/*---------------------------------------------------------------------*/
-unsigned long flash_init (void)
-{
- int i;
- unsigned long addr;
- flash_info_t *fli = &flash_info[0];
-
- fli->size = BANKSZ;
- fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- fli->flash_id = FLASH_MAN_AMD + FLASH_AMDLV065D;
-
- addr = CONFIG_SYS_FLASH_BASE;
- for (i = 0; i < fli->sector_count; ++i) {
- fli->start[i] = addr;
- addr += SECTSZ;
-
- /* Protect all but 2 MByte user area */
- if (addr < (CONFIG_SYS_FLASH_BASE + USERFLASH))
- fli->protect[i] = 0;
- else
- fli->protect[i] = 1;
- }
-
- return (BANKSZ);
-}
diff --git a/board/altera/dk1s10/misc.c b/board/altera/dk1s10/misc.c
deleted file mode 100644
index f25cdeb..0000000
--- a/board/altera/dk1s10/misc.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * board/altera/dk1s10/misc.c
- *
- * miscellaneous board interfaces / drivers
- */
-
-#include <common.h>
-
-#if defined(CONFIG_SEVENSEG)
-#include "../common/sevenseg.h"
-#include "../common/sevenseg.c"
-#endif
diff --git a/board/altera/dk1s10/u-boot.lds b/board/altera/dk1s10/u-boot.lds
deleted file mode 100644
index 50c3fe7..0000000
--- a/board/altera/dk1s10/u-boot.lds
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-nios")
-OUTPUT_ARCH(nios)
-ENTRY(_start)
-
-SECTIONS
-{
- .text :
- {
- arch/nios/cpu/start.o (.text)
- *(.text)
- }
- __text_end = .;
-
- . = ALIGN(4);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- __rodata_end = .;
-
- . = ALIGN(4);
- .data :
- {
- *(.data)
- }
- . = ALIGN(4);
- __data_end = .;
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- }
- . = ALIGN(4);
- __u_boot_cmd_end = .;
-
- __bss_start = .;
- . = ALIGN(4);
- .bss (NOLOAD) :
- {
- *(.bss)
- }
- . = ALIGN(4);
- __bss_end = .;
-}
diff --git a/board/altera/dk1s10/vectors.S b/board/altera/dk1s10/vectors.S
deleted file mode 100644
index 226f65b..0000000
--- a/board/altera/dk1s10/vectors.S
+++ /dev/null
@@ -1,139 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-
-/*************************************************************************
- * Exception Vector Table
- *
- * This could have gone in the cpu soure tree, but the whole point of
- * Nios is customization -- and polluting the cpu source tree with
- * board-specific ifdef's really defeats the purpose, no? With this in
- * the board-specific tree, each board has the freedom to organize
- * vectors/traps, etc anyway it wants. The init code copies this table
- * to the proper location.
- *
- * Each board can do what it likes here. But there are four "standard"
- * handlers availble:
- *
- * _cwp_lolimit -Handles register window underflows.
- * _cwp_hilimit -Handles register window overflows.
- * _timebase_int -Increments the timebase.
- * _def_xhandler -Default exception handler.
- *
- * _timebase_int handles a Nios Timer interrupt and increments the
- * timestamp used for the get_timer(), reset_timer(), etc. routines. It
- * expects the timer to be configured like the standard-32 low priority
- * timer.
- *
- * _def_xhandler dispatches exceptions/traps via the external_interrupt()
- * routine. This lets you use the irq_install_handler() and handle your
- * interrupts/traps with code written in C.
- ************************************************************************/
-
- .data
- .global _vectors
- .align 4
-_vectors:
-
-#if defined(CONFIG_SYS_NIOS_CPU_OCI_BASE)
- /* OCI does the reset job */
- .long _def_xhandler@h /* Vector 0 - NMI / Reset */
-#else
- /* there is no OCI, so we have to do a direct reset jump here */
- .long CONFIG_SYS_NIOS_CPU_RST_VECT /* Vector 0 - Reset to GERMS */
-#endif
- .long _cwp_lolimit@h /* Vector 1 - underflow */
- .long _cwp_hilimit@h /* Vector 2 - overflow */
-
- .long _def_xhandler@h /* Vector 3 - GNUPro debug */
- .long _def_xhandler@h /* Vector 4 - GNUPro debug */
- .long _def_xhandler@h /* Vector 5 - GNUPro debug */
- .long _def_xhandler@h /* Vector 6 - future reserved */
- .long _def_xhandler@h /* Vector 7 - future reserved */
- .long _def_xhandler@h /* Vector 8 - future reserved */
- .long _def_xhandler@h /* Vector 9 - future reserved */
- .long _def_xhandler@h /* Vector 10 - future reserved */
- .long _def_xhandler@h /* Vector 11 - future reserved */
- .long _def_xhandler@h /* Vector 12 - future reserved */
- .long _def_xhandler@h /* Vector 13 - future reserved */
- .long _def_xhandler@h /* Vector 14 - future reserved */
- .long _def_xhandler@h /* Vector 15 - future reserved */
-#if (CONFIG_SYS_NIOS_TMRIRQ == 16)
- .long _timebase_int@h /* Vector 16 - lopri timer*/
-#else
- .long _def_xhandler@h /* Vector 16 */
-#endif
- .long _def_xhandler@h /* Vector 17 */
- .long _def_xhandler@h /* Vector 18 */
- .long _def_xhandler@h /* Vector 19 */
- .long _def_xhandler@h /* Vector 20 */
- .long _def_xhandler@h /* Vector 21 */
- .long _def_xhandler@h /* Vector 22 */
- .long _def_xhandler@h /* Vector 23 */
- .long _def_xhandler@h /* Vector 24 */
- .long _def_xhandler@h /* Vector 25 */
- .long _def_xhandler@h /* Vector 26 */
- .long _def_xhandler@h /* Vector 27 */
- .long _def_xhandler@h /* Vector 28 */
- .long _def_xhandler@h /* Vector 29 */
- .long _def_xhandler@h /* Vector 30 */
- .long _def_xhandler@h /* Vector 31 */
- .long _def_xhandler@h /* Vector 32 */
- .long _def_xhandler@h /* Vector 33 */
- .long _def_xhandler@h /* Vector 34 */
- .long _def_xhandler@h /* Vector 35 */
- .long _def_xhandler@h /* Vector 36 */
- .long _def_xhandler@h /* Vector 37 */
- .long _def_xhandler@h /* Vector 38 */
- .long _def_xhandler@h /* Vector 39 */
- .long _def_xhandler@h /* Vector 40 */
- .long _def_xhandler@h /* Vector 41 */
- .long _def_xhandler@h /* Vector 42 */
- .long _def_xhandler@h /* Vector 43 */
- .long _def_xhandler@h /* Vector 44 */
- .long _def_xhandler@h /* Vector 45 */
- .long _def_xhandler@h /* Vector 46 */
- .long _def_xhandler@h /* Vector 47 */
- .long _def_xhandler@h /* Vector 48 */
- .long _def_xhandler@h /* Vector 49 */
-#if (CONFIG_SYS_NIOS_TMRIRQ == 50)
- .long _timebase_int@h /* Vector 50 - lopri timer*/
-#else
- .long _def_xhandler@h /* Vector 50 */
-#endif
- .long _def_xhandler@h /* Vector 51 */
- .long _def_xhandler@h /* Vector 52 */
- .long _def_xhandler@h /* Vector 53 */
- .long _def_xhandler@h /* Vector 54 */
- .long _def_xhandler@h /* Vector 55 */
- .long _def_xhandler@h /* Vector 56 */
- .long _def_xhandler@h /* Vector 57 */
- .long _def_xhandler@h /* Vector 58 */
- .long _def_xhandler@h /* Vector 59 */
- .long _def_xhandler@h /* Vector 60 */
- .long _def_xhandler@h /* Vector 61 */
- .long _def_xhandler@h /* Vector 62 */
- .long _def_xhandler@h /* Vector 63 */
diff --git a/board/ssv/adnpesc1/Makefile b/board/ssv/adnpesc1/Makefile
deleted file mode 100644
index 40f04b8..0000000
--- a/board/ssv/adnpesc1/Makefile
+++ /dev/null
@@ -1,51 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS := $(BOARD).o flash.o misc.o
-SOBJS := vectors.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-clean:
- rm -f $(SOBJS) $(OBJS)
-
-distclean: clean
- rm -f $(LIB) core *.bak $(obj).depend
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/ssv/adnpesc1/adnpesc1.c b/board/ssv/adnpesc1/adnpesc1.c
deleted file mode 100644
index 802bfba..0000000
--- a/board/ssv/adnpesc1/adnpesc1.c
+++ /dev/null
@@ -1,103 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <netdev.h>
-#include <nios-io.h>
-#include <spi.h>
-
-#if defined(CONFIG_HW_WATCHDOG)
-extern void ssv_wd_pio_init(void); /* comes from ../common/wd_pio.c
- included by ./misc.c */
-#endif
-
-void _default_hdlr (void)
-{
- printf ("default_hdlr\n");
-}
-
-int board_early_init_f (void)
-{
-#if defined(CONFIG_HW_WATCHDOG)
- ssv_wd_pio_init();
-#endif
- return 0;
-}
-
-int checkboard (void)
-{
- puts ( "Board: SSV DilNetPC ADNP/ESC1"
-#if defined(CONFIG_DNPEVA2)
- " on DNP/EVA2"
-#endif
- "\n");
-#if defined(CONFIG_NIOS_BASE_32)
- puts ("Conf.: SSV Base 32 (nios_32)\n");
-#endif
-
- return 0;
-}
-
-phys_size_t initdram (int board_type)
-{
- return (0);
-}
-
-/*
- * The following are used to control the SPI chip selects for the SPI command.
- */
-#if defined(CONFIG_CMD_SPI) && CONFIG_NIOS_SPI
-
-#define SPI_RTC_CS_MASK 0x00000001
-
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
-{
- return bus == 0 && cs == 0;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
- nios_spi_t *spi = (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
-
- spi->slaveselect = SPI_RTC_CS_MASK; /* activate (1) */
-}
-
-void spi_cs_deactivate(struct spi_slave *slave)
-{
- nios_spi_t *spi = (nios_spi_t *)CONFIG_SYS_NIOS_SPIBASE;
-
- spi->slaveselect = 0; /* deactivate (0) */
-}
-
-#endif
-
-#ifdef CONFIG_CMD_NET
-int board_eth_init(bd_t *bis)
-{
- int rc = 0;
-#ifdef CONFIG_CS8900
- rc = cs8900_initialize(0, CONFIG_CS8900_BASE);
-#endif
- return rc;
-}
-#endif
diff --git a/board/ssv/adnpesc1/config.mk b/board/ssv/adnpesc1/config.mk
deleted file mode 100644
index cf05445..0000000
--- a/board/ssv/adnpesc1/config.mk
+++ /dev/null
@@ -1,29 +0,0 @@
-#
-# (C) Copyright 2004
-# Li-Pro.Net <www.li-pro.net>
-# Stephan Linz <linz@li-pro.net>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-TEXT_BASE = 0x02fc0000 # ATTENTION: notice your CONFIG_SYS_MONITOR_LEN setting
-
-ifeq ($(debug),1)
-PLATFORM_CPPFLAGS += -DDEBUG
-endif
diff --git a/board/ssv/adnpesc1/flash.c b/board/ssv/adnpesc1/flash.c
deleted file mode 100644
index 882630c..0000000
--- a/board/ssv/adnpesc1/flash.c
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <nios.h>
-
-/*
- * include common flash code (for ssv boards)
- */
-#include "../common/flash.c"
-
-/*---------------------------------------------------------------------*/
-#define BANKSZ (8 * 1024 * 1024)
-#define SECTSZ (64 * 1024)
-#define UBOOTSECS ((CONFIG_SYS_MONITOR_LEN + CONFIG_ENV_SIZE) / SECTSZ)
-#define UBOOTAREA (UBOOTSECS * 64 * 1024) /* monitor / env area */
-
-/*---------------------------------------------------------------------*/
-unsigned long flash_init (void)
-{
- int i;
- unsigned long addr;
- flash_info_t *fli = &flash_info[0];
-
- fli->size = BANKSZ;
- fli->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
- fli->flash_id = FLASH_MAN_AMD + FLASH_AMLV640U;
-
- addr = CONFIG_SYS_FLASH_BASE;
- for (i = 0; i < fli->sector_count; ++i) {
- fli->start[i] = addr;
- addr += SECTSZ;
-
- /* Protect monitor / environment area */
- if (addr <= (CONFIG_SYS_FLASH_BASE + UBOOTAREA))
- fli->protect[i] = 1;
- else
- fli->protect[i] = 0;
- }
-
- return (BANKSZ);
-}
diff --git a/board/ssv/adnpesc1/misc.c b/board/ssv/adnpesc1/misc.c
deleted file mode 100644
index 1c5fcb9..0000000
--- a/board/ssv/adnpesc1/misc.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * board/ssv/adnpesc1/misc.c
- *
- * miscellaneous board interfaces / drivers
- */
-
-#include <common.h>
-
-#if defined(CONFIG_STATUS_LED)
-#include "../common/cmd_sled.c"
-#endif
-
-#if defined(CONFIG_HW_WATCHDOG)
-#include "../common/wd_pio.c"
-#endif
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-#include "../common/post.c"
-#endif
diff --git a/board/ssv/adnpesc1/u-boot.lds b/board/ssv/adnpesc1/u-boot.lds
deleted file mode 100644
index 50c3fe7..0000000
--- a/board/ssv/adnpesc1/u-boot.lds
+++ /dev/null
@@ -1,70 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-OUTPUT_FORMAT("elf32-nios")
-OUTPUT_ARCH(nios)
-ENTRY(_start)
-
-SECTIONS
-{
- .text :
- {
- arch/nios/cpu/start.o (.text)
- *(.text)
- }
- __text_end = .;
-
- . = ALIGN(4);
- .rodata :
- {
- *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
- }
- __rodata_end = .;
-
- . = ALIGN(4);
- .data :
- {
- *(.data)
- }
- . = ALIGN(4);
- __data_end = .;
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd :
- {
- *(.u_boot_cmd)
- }
- . = ALIGN(4);
- __u_boot_cmd_end = .;
-
- __bss_start = .;
- . = ALIGN(4);
- .bss (NOLOAD) :
- {
- *(.bss)
- }
- . = ALIGN(4);
- __bss_end = .;
-}
diff --git a/board/ssv/adnpesc1/vectors.S b/board/ssv/adnpesc1/vectors.S
deleted file mode 100644
index 8b2da2f..0000000
--- a/board/ssv/adnpesc1/vectors.S
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-
-
-/*************************************************************************
- * Exception Vector Table
- *
- * This could have gone in the cpu soure tree, but the whole point of
- * Nios is customization -- and polluting the cpu source tree with
- * board-specific ifdef's really defeats the purpose, no? With this in
- * the board-specific tree, each board has the freedom to organize
- * vectors/traps, etc anyway it wants. The init code copies this table
- * to the proper location.
- *
- * Each board can do what it likes here. But there are four "standard"
- * handlers availble:
- *
- * _cwp_lolimit -Handles register window underflows.
- * _cwp_hilimit -Handles register window overflows.
- * _timebase_int -Increments the timebase.
- * _def_xhandler -Default exception handler.
- *
- * _timebase_int handles a Nios Timer interrupt and increments the
- * timestamp used for the get_timer(), reset_timer(), etc. routines. It
- * expects the timer to be configured like the standard-32 low priority
- * timer.
- *
- * _def_xhandler dispatches exceptions/traps via the external_interrupt()
- * routine. This lets you use the irq_install_handler() and handle your
- * interrupts/traps with code written in C.
- ************************************************************************/
-
- .data
- .global _vectors
- .align 4
-_vectors:
-
-#if defined(CONFIG_SYS_NIOS_CPU_OCI_BASE)
- /* OCI does the reset job */
- .long _def_xhandler@h /* Vector 0 - NMI / Reset */
-#else
- /* there is no OCI, so we have to do a direct reset jump here */
- .long CONFIG_SYS_NIOS_CPU_RST_VECT /* Vector 0 - Reset to GERMS */
-#endif
- .long _cwp_lolimit@h /* Vector 1 - underflow */
- .long _cwp_hilimit@h /* Vector 2 - overflow */
-
- .long _def_xhandler@h /* Vector 3 - GNUPro debug */
- .long _def_xhandler@h /* Vector 4 - GNUPro debug */
- .long _def_xhandler@h /* Vector 5 - GNUPro debug */
- .long _def_xhandler@h /* Vector 6 - future reserved */
- .long _def_xhandler@h /* Vector 7 - future reserved */
- .long _def_xhandler@h /* Vector 8 - future reserved */
- .long _def_xhandler@h /* Vector 9 - future reserved */
- .long _def_xhandler@h /* Vector 10 - future reserved */
- .long _def_xhandler@h /* Vector 11 - future reserved */
- .long _def_xhandler@h /* Vector 12 - future reserved */
- .long _def_xhandler@h /* Vector 13 - future reserved */
- .long _def_xhandler@h /* Vector 14 - future reserved */
- .long _def_xhandler@h /* Vector 15 - future reserved */
-#if (CONFIG_SYS_NIOS_TMRIRQ == 16)
- .long _timebase_int@h /* Vector 16 - lopri timer*/
-#else
- .long _def_xhandler@h /* Vector 16 */
-#endif
- .long _def_xhandler@h /* Vector 17 */
- .long _def_xhandler@h /* Vector 18 */
- .long _def_xhandler@h /* Vector 19 */
- .long _def_xhandler@h /* Vector 20 */
- .long _def_xhandler@h /* Vector 21 */
- .long _def_xhandler@h /* Vector 22 */
- .long _def_xhandler@h /* Vector 23 */
- .long _def_xhandler@h /* Vector 24 */
- .long _def_xhandler@h /* Vector 25 */
- .long _def_xhandler@h /* Vector 26 */
- .long _def_xhandler@h /* Vector 27 */
- .long _def_xhandler@h /* Vector 28 */
- .long _def_xhandler@h /* Vector 29 */
- .long _def_xhandler@h /* Vector 30 */
- .long _def_xhandler@h /* Vector 31 */
- .long _def_xhandler@h /* Vector 32 */
- .long _def_xhandler@h /* Vector 33 */
- .long _def_xhandler@h /* Vector 34 */
- .long _def_xhandler@h /* Vector 35 */
- .long _def_xhandler@h /* Vector 36 */
- .long _def_xhandler@h /* Vector 37 */
- .long _def_xhandler@h /* Vector 38 */
- .long _def_xhandler@h /* Vector 39 */
- .long _def_xhandler@h /* Vector 40 */
- .long _def_xhandler@h /* Vector 41 */
- .long _def_xhandler@h /* Vector 42 */
- .long _def_xhandler@h /* Vector 43 */
- .long _def_xhandler@h /* Vector 44 */
- .long _def_xhandler@h /* Vector 45 */
- .long _def_xhandler@h /* Vector 46 */
- .long _def_xhandler@h /* Vector 47 */
- .long _def_xhandler@h /* Vector 48 */
- .long _def_xhandler@h /* Vector 49 */
-#if (CONFIG_SYS_NIOS_TMRIRQ == 50)
- .long _timebase_int@h /* Vector 50 - lopri timer*/
-#else
- .long _def_xhandler@h /* Vector 50 */
-#endif
- .long _def_xhandler@h /* Vector 51 */
- .long _def_xhandler@h /* Vector 52 */
- .long _def_xhandler@h /* Vector 53 */
- .long _def_xhandler@h /* Vector 54 */
- .long _def_xhandler@h /* Vector 55 */
- .long _def_xhandler@h /* Vector 56 */
- .long _def_xhandler@h /* Vector 57 */
- .long _def_xhandler@h /* Vector 58 */
- .long _def_xhandler@h /* Vector 59 */
- .long _def_xhandler@h /* Vector 60 */
- .long _def_xhandler@h /* Vector 61 */
- .long _def_xhandler@h /* Vector 62 */
- .long _def_xhandler@h /* Vector 63 */
diff --git a/board/ssv/common/cmd_sled.c b/board/ssv/common/cmd_sled.c
deleted file mode 100644
index 449c1a4..0000000
--- a/board/ssv/common/cmd_sled.c
+++ /dev/null
@@ -1,162 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <status_led.h>
-
-#if defined(CONFIG_STATUS_LED)
-
-/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- * !!!!! Q u i c k & D i r t y H a c k !!!!!
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
- * !!!!! !!!!!
- * !!!!! Next type definition was coming from original !!!!!
- * !!!!! status LED driver drivers/misc/status_led.c !!!!!
- * !!!!! and should be exported for using it here. !!!!!
- * !!!!! !!!!!
- * !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! */
-
-typedef struct {
- led_id_t mask;
- int state;
- int period;
- int cnt;
-} led_dev_t;
-
-extern led_dev_t led_dev[];
-
-#if defined(CONFIG_CMD_BSP)
-int do_sled (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
-{
- int led_id = 0;
-
- if (argc > 1) {
-#ifdef STATUS_LED_BOOT
- if (!strcmp (argv[1], "boot")) {
- led_id = STATUS_LED_BOOT + 1;
- }
-#endif
-#ifdef STATUS_LED_RED
- if (!strcmp (argv[1], "red")) {
- led_id = STATUS_LED_RED + 1;
- }
-#endif
-#ifdef STATUS_LED_YELLOW
- if (!strcmp (argv[1], "yellow")) {
- led_id = STATUS_LED_YELLOW + 1;
- }
-#endif
-#ifdef STATUS_LED_GREEN
- if (!strcmp (argv[1], "green")) {
- led_id = STATUS_LED_GREEN + 1;
- }
-#endif
- }
-
- switch (argc) {
- case 1:
-#if (STATUS_LED_BITS > 3)
- for (; led_id < 4; led_id++)
-#elif (STATUS_LED_BITS > 2)
- for (; led_id < 3; led_id++)
-#elif (STATUS_LED_BITS > 1)
- for (; led_id < 2; led_id++)
-#elif (STATUS_LED_BITS > 0)
- for (; led_id < 1; led_id++)
-#else
-#error "*** STATUS_LED_BITS not correct defined ***"
-#endif
- {
- printf ("Status LED '%s' is %s\n",
- led_id == STATUS_LED_BOOT ? "boot"
- : led_id == STATUS_LED_RED ? "red"
- : led_id == STATUS_LED_YELLOW ? "yellow"
- : led_id ==
- STATUS_LED_GREEN ? "green" : "unknown",
- led_dev[led_id].state ==
- STATUS_LED_ON ? "on" : led_dev[led_id].
- state ==
- STATUS_LED_OFF ? "off" : led_dev[led_id].
- state ==
- STATUS_LED_BLINKING ? "blinking" : "unknown");
- }
- return 0;
- case 2:
- if (led_id) {
- printf ("Status LED '%s' is %s\n", argv[1],
- led_dev[led_id - 1].state ==
- STATUS_LED_ON ? "on" : led_dev[led_id -
- 1].state ==
- STATUS_LED_OFF ? "off" : led_dev[led_id -
- 1].state ==
- STATUS_LED_BLINKING ? "blinking" : "unknown");
- return 0;
- } else
- break;
- case 3:
- if (led_id) {
- if (!strcmp (argv[2], "on")) {
- status_led_set (led_id - 1, STATUS_LED_ON);
- return 0;
- } else if (!strcmp (argv[2], "off")) {
- status_led_set (led_id - 1, STATUS_LED_OFF);
- return 0;
- } else if (!strcmp (argv[2], "blink")) {
- status_led_set (led_id - 1,
- STATUS_LED_BLINKING);
- return 0;
- } else
- break;
- } else
- break;
- default:
- break;
- }
- cmd_usage(cmdtp);
- return 1;
-}
-
-#ifdef STATUS_LED_BOOT
-#ifdef STATUS_LED_RED
-#ifdef STATUS_LED_YELLOW
-#ifdef STATUS_LED_GREEN
-#define __NAME_STR " - name: boot|red|yellow|green\n"
-#else
-#define __NAME_STR " - name: boot|red|yellow\n"
-#endif
-#else
-#define __NAME_STR " - name: boot|red\n"
-#endif
-#else
-#define __NAME_STR " - name: boot\n"
-#endif
-#else
-#define __NAME_STR " - name: (no such defined)\n"
-#endif
-
-U_BOOT_CMD (sled, 3, 0, do_sled,
- "check and set status led",
- "sled [name [state]]\n" __NAME_STR " - state: on|off|blink");
-#endif
-#endif /* CONFIG_STATUS_LED */
diff --git a/board/ssv/common/flash.c b/board/ssv/common/flash.c
deleted file mode 100644
index 70bf9d6..0000000
--- a/board/ssv/common/flash.c
+++ /dev/null
@@ -1,207 +0,0 @@
-/*
- * (C) Copyright 2000-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <watchdog.h>
-#include <nios.h>
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*--------------------------------------------------------------------*/
-void flash_print_info (flash_info_t * info)
-{
- int i, k;
- unsigned long size;
- int erased;
- volatile unsigned char *flash;
-
- printf (" Size: %ld KB in %d Sectors\n",
- info->size >> 10, info->sector_count);
- printf (" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; ++i) {
-
- /* Check if whole sector is erased */
- if (i != (info->sector_count - 1))
- size = info->start[i + 1] - info->start[i];
- else
- size = info->start[0] + info->size - info->start[i];
- erased = 1;
- flash = (volatile unsigned char *) info->start[i];
- for (k = 0; k < size; k++) {
- if (*flash++ != 0xff) {
- erased = 0;
- break;
- }
- }
-
- /* Print the info */
- if ((i % 5) == 0)
- printf ("\n ");
- printf (" %08lX%s%s", info->start[i], erased ? " E" : " ",
- info->protect[i] ? "RO " : " ");
- }
- printf ("\n");
-}
-
-/*-------------------------------------------------------------------*/
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
- volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]);
- volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2;
- int prot, sect, wait;
- unsigned oldpri;
- ulong start;
-
- /* Some sanity checking */
- if ((s_first < 0) || (s_first > s_last)) {
- printf ("- no sectors to erase\n");
- return 1;
- }
-
- prot = 0;
- for (sect = s_first; sect <= s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
-#ifdef DEBUG
- for (sect = s_first; sect <= s_last; sect++) {
- printf("- Erase: Sect: %i @ 0x%08x\n", sect, info->start[sect]);
- }
-#endif
-
- /* NOTE: disabling interrupts on Nios can be very bad since it
- * also disables the LO_LIMIT exception. It's better here to
- * set the interrupt priority to 3 & restore it when we're done.
- */
- oldpri = ipri (3);
-
- /* It's ok to erase multiple sectors provided we don't delay more
- * than 50 usec between cmds ... at which point the erase time-out
- * occurs. So don't go and put printf() calls in the loop ... it
- * won't be very helpful ;-)
- */
- for (sect = s_first; sect <= s_last; sect++) {
- if (info->protect[sect] == 0) { /* not protected */
- addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]);
- *addr = 0xf0;
- *(addr+0xAAA/2) = 0xaa;
- *(addr+0x554/2) = 0x55;
- *(addr+0xAAA/2) = 0x80;
- *(addr+0xAAA/2) = 0xaa;
- *(addr+0x554/2) = 0x55;
- *addr2 = 0x30;
- /* Now just wait for 0xffff & provide some user
- * feedback while we wait. Here we have to grant
- * timer interrupts. Otherwise get_timer() can't
- * work right. */
- ipri(oldpri);
- start = get_timer (0);
- while (*addr2 != 0xffff) {
- for (wait = 8; wait; wait--) {
- udelay (125 * 1000);
- }
- putc ('.');
- if (get_timer (start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
- printf ("timeout\n");
- return 1;
- }
- }
- oldpri = ipri (3); /* disallow non important irqs again */
- }
- }
-
- printf ("\n");
- *addr = 0xf0;
-
- /* Restore interrupt priority */
- ipri (oldpri);
-
- return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * srcbuffer, ulong addr, ulong cnt)
-{
-
- volatile CONFIG_SYS_FLASH_WORD_SIZE *cmd = (vu_short *) info->start[0];
- volatile CONFIG_SYS_FLASH_WORD_SIZE *dst = (vu_short *) addr;
- CONFIG_SYS_FLASH_WORD_SIZE *src = (void *) srcbuffer;
- CONFIG_SYS_FLASH_WORD_SIZE b;
- unsigned oldpri;
- ulong start;
-
- cnt /= sizeof(CONFIG_SYS_FLASH_WORD_SIZE);
- while (cnt) {
- /* Check for sufficient erase */
- b = *src;
- if ((*dst & b) != b) {
- printf ("%02x : %02x\n", *dst, b);
- return (2);
- }
-
- /* Disable interrupts other than window underflow
- * (interrupt priority 2)
- */
- oldpri = ipri (3);
- *(cmd+0xAAA/2) = 0xaa;
- *(cmd+0x554/2) = 0x55;
- *(cmd+0xAAA/2) = 0xa0;
- ipri (oldpri);
- *dst = b;
-
- /* Verify write */
- start = get_timer (0);
- while (*dst != b) {
- if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
- *cmd = 0xf0;
- return 1;
- }
- }
- dst++;
- src++;
- cnt--;
- }
-
- *cmd = 0xf0;
- return (0);
-}
diff --git a/board/ssv/common/post.c b/board/ssv/common/post.c
deleted file mode 100644
index c7a9ccc..0000000
--- a/board/ssv/common/post.c
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_POST) || defined(CONFIG_LOGBUFFER)
-
-#if !defined(CONFIG_SYS_NIOS_POST_WORD_ADDR)
-#error "*** CONFIG_SYS_NIOS_POST_WORD_ADDR not defined ***"
-#endif
-
-void post_word_store (ulong a)
-{
- volatile void *save_addr = (void *)(CONFIG_SYS_NIOS_POST_WORD_ADDR);
- *(volatile ulong *) save_addr = a;
-}
-
-ulong post_word_load (void)
-{
- volatile void *save_addr = (void *)(CONFIG_SYS_NIOS_POST_WORD_ADDR);
- return *(volatile ulong *) save_addr;
-}
-
-#endif /* CONFIG_POST || CONFIG_LOGBUFFER*/
diff --git a/board/ssv/common/wd_pio.c b/board/ssv/common/wd_pio.c
deleted file mode 100644
index eaf1d25..0000000
--- a/board/ssv/common/wd_pio.c
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <nios.h>
-#include <nios-io.h>
-
-#if defined(CONFIG_HW_WATCHDOG)
-
-#if !defined(CONFIG_HW_WDENA_BASE)
-#error "*** CONFIG_HW_WDENA_BASE not defined ***"
-#if !defined(CONFIG_HW_WDENA_BIT)
-#error "*** CONFIG_HW_WDENA_BIT not defined ***"
-#endif
-#endif
-
-#if !defined(CONFIG_HW_WDTOG_BASE)
-#error "*** CONFIG_HW_WDTOG_BASE not defined ***"
-#if !defined(CONFIG_HW_WDTOG_BIT)
-#error "*** CONFIG_HW_WDTOG_BIT not defined ***"
-#endif
-#endif
-
-#ifdef CONFIG_HW_WDPORT_WRONLY /* emulate read access */
-static unsigned __wd_ena_pio_portval = 0;
-#endif
-
-#define WD_PIO_INIT_DONE(V) ((V) & (1 << CONFIG_HW_WDENA_BIT))
-
-void ssv_wd_pio_init(void)
-{
- nios_pio_t *ena_piop = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
- nios_pio_t *trg_piop = (nios_pio_t*)CONFIG_HW_WDTOG_BASE;
-
- trg_piop->data &= ~(1 << CONFIG_HW_WDTOG_BIT);
-
-#ifdef CONFIG_HW_WDPORT_WRONLY /* emulate read access */
-
- __wd_ena_pio_portval |= (1 << CONFIG_HW_WDENA_BIT);
- ena_piop->data = __wd_ena_pio_portval;
-
-#else /* !CONFIG_HW_WDPORT_WRONLY */
-
- trg_piop->direction |= (1 << CONFIG_HW_WDTOG_BIT);
-
- ena_piop->data |= (1 << CONFIG_HW_WDENA_BIT);
- ena_piop->direction |= (1 << CONFIG_HW_WDENA_BIT);
-
-#endif /* CONFIG_HW_WDPORT_WRONLY */
-}
-
-void ssv_wd_pio_done(void)
-{
- nios_pio_t *piop = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
-
-#ifdef CONFIG_HW_WDPORT_WRONLY /* emulate read access */
-
- __wd_ena_pio_portval &= ~(1 << CONFIG_HW_WDENA_BIT);
- piop->data = __wd_ena_pio_portval;
-
-#else /* !CONFIG_HW_WDPORT_WRONLY */
-
- piop->data &= ~(1 << CONFIG_HW_WDENA_BIT);
-
-#endif /* CONFIG_HW_WDPORT_WRONLY */
-}
-
-void ssv_wd_pio_reset(void)
-{
- nios_pio_t *trg_piop = (nios_pio_t*)CONFIG_HW_WDTOG_BASE;
-
-#ifdef CONFIG_HW_WDPORT_WRONLY
- if (WD_PIO_INIT_DONE(__wd_ena_pio_portval))
-#else
- nios_pio_t *ena_piop = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
-
- if (WD_PIO_INIT_DONE(ena_piop->data))
-#endif
- {
- trg_piop->data |= (1 << CONFIG_HW_WDTOG_BIT);
- trg_piop->data &= ~(1 << CONFIG_HW_WDTOG_BIT);
- }
-}
-
-void hw_watchdog_reset(void)
-{
- int re_enable = disable_interrupts ();
-
- ssv_wd_pio_reset();
- if (re_enable)
- enable_interrupts ();
-}
-
-#if defined(CONFIG_CMD_BSP)
-int do_wd (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- nios_pio_t *ena_piop = (nios_pio_t*)CONFIG_HW_WDENA_BASE;
-
- switch (argc)
- {
- case 1:
- printf ("Watchdog timer status is %s\n",
-#ifdef CONFIG_HW_WDPORT_WRONLY
- WD_PIO_INIT_DONE(__wd_ena_pio_portval)
-#else
- WD_PIO_INIT_DONE(ena_piop->data)
-#endif
- ? "on" : "off");
- return 0;
- case 2:
- if (!strcmp(argv[1],"on"))
- {
- ssv_wd_pio_init();
- printf("Watchdog timer now is on\n");
- return 0;
- }
- else if (!strcmp(argv[1],"off"))
- {
- ssv_wd_pio_done();
- printf("Watchdog timer now is off\n");
- return 0;
- }
- break;
- default:
- break;
- }
- cmd_usage(cmdtp);
- return 1;
-}
-
-U_BOOT_CMD(
- wd, 2, 1, do_wd,
- "check and set watchdog",
- "on - switch watchDog on\n"
- "wd off - switch watchdog off\n"
- "wd - print current status"
-);
-#endif
-#endif /* CONFIG_HW_WATCHDOG */
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index d22eb66..a0f7998 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -119,25 +119,6 @@
return 0;
}
-#elif defined(CONFIG_NIOS) /* NIOS*/
-
-int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-{
- bd_t *bd = gd->bd;
-
- print_num ("memstart", (ulong)bd->bi_memstart);
- print_lnum ("memsize", (u64)bd->bi_memsize);
- print_num ("flashstart", (ulong)bd->bi_flashstart);
- print_num ("flashsize", (ulong)bd->bi_flashsize);
- print_num ("flashoffset", (ulong)bd->bi_flashoffset);
-
- print_eth(0);
- printf ("ip_addr = %pI4\n", &bd->bi_ip_addr);
- printf ("baudrate = %ld bps\n", bd->bi_baudrate);
-
- return 0;
-}
-
#elif defined(CONFIG_NIOS2) /* Nios-II */
int do_bdinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index da06009..8803202 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -174,8 +174,6 @@
#define IH_INITRD_ARCH IH_ARCH_MICROBLAZE
#elif defined(__mips__)
#define IH_INITRD_ARCH IH_ARCH_MIPS
-#elif defined(__nios__)
- #define IH_INITRD_ARCH IH_ARCH_NIOS
#elif defined(__nios2__)
#define IH_INITRD_ARCH IH_ARCH_NIOS2
#elif defined(__PPC__)
diff --git a/common/image.c b/common/image.c
index 8d4be14..2b6007e 100644
--- a/common/image.c
+++ b/common/image.c
@@ -84,7 +84,6 @@
{ IH_ARCH_MICROBLAZE, "microblaze", "MicroBlaze", },
{ IH_ARCH_MIPS, "mips", "MIPS", },
{ IH_ARCH_MIPS64, "mips64", "MIPS 64 Bit", },
- { IH_ARCH_NIOS, "nios", "NIOS", },
{ IH_ARCH_NIOS2, "nios2", "NIOS II", },
{ IH_ARCH_PPC, "powerpc", "PowerPC", },
{ IH_ARCH_PPC, "ppc", "PowerPC", },
diff --git a/config.mk b/config.mk
index c4ad223..bcda776 100644
--- a/config.mk
+++ b/config.mk
@@ -191,14 +191,6 @@
CFLAGS += $(call cc-option,-fno-stack-protector)
-# avoid trigraph warnings while parsing pci.h (produced by NIOS gcc-2.9)
-# this option have to be placed behind -Wall -- that's why it is here
-ifeq ($(ARCH),nios)
-ifeq ($(findstring 2.9,$(shell $(CC) --version)),2.9)
-CFLAGS := $(CPPFLAGS) -Wall -Wno-trigraphs
-endif
-endif
-
# $(CPPFLAGS) sets -g, which causes gcc to pass a suitable -g<format>
# option to the assembler.
AFLAGS_DEBUG :=
diff --git a/doc/README.adnpesc1 b/doc/README.adnpesc1
deleted file mode 100644
index f9566b8..0000000
--- a/doc/README.adnpesc1
+++ /dev/null
@@ -1,235 +0,0 @@
-
- SSV ADNP/ESC1 Embedded Softcore Computing
- Nios Softcore, Altera Cyclone FPGA
-
- Last Update: February 27, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the SSV Embedded
-Nios Softcore Computing platform ADNP/ESC1. For general Nios
-information see doc/README.nios.
-
-Most stuff of this file was borrowed and based on README.dk1s10,
-the Altera DK-1S10 related information file.
-
-For those interested in contributing ... see HELP WANTED section
-in doc/README.nios.
-
-Contents:
-
- 1. Files
- 2. Memory Organization
- 3. CPU Variations
- 4. Examples
- 5. Programming U-Boot into FLASH with GERMS
- 6. Autoboot
- 7. U-Boot environment convention and update philosophy
-
-====================================================================
-
-1. Files
-=========
- board/ssv/adnpesc1/*
- include/configs/ADNPESC1.h
- include/configs/ADNPESC1_base_32.h
-
-
-2. Memory Organization
-=======================
-
-For the most part, you can put things pretty much anywhere.
-This is pretty flexible for Nios. So here we make some arbitrary
-choices & assume that the monitor is placed at the end of a memory
-resource. So you must make sure TEXT_BASE is chosen appropriately.
-This is very important if you plan to move your memory to another
-place as configured at this time!
-
- -The heap is placed below the monitor (U-Boot code).
- -Global data is placed below the heap.
- -The stack is placed below global data (&grows down).
-
-(see doc/README.adnpesc1_base32 too)
-
-
-3. CPU Variations
-=================
-
-There are more than one NIOS CPU variation for the ADNP/ESC1 possible.
-U-Boot supports the following CPU configurations:
-
- - SSV Basis 32 (make ADNPESC1_base_32_config)
- - SSV Basis 32 at DNP evaluation base board 2
- (make ADNPESC1_DNPEVA2_base_32_config)
-
-
-4. Examples
-============
-
-The hello_world example works fine. To try out you have to change
-the default load address from 0x0100_0000 to 0x0204_0000 in
-examples/Makefile (the real SDRAM for default board configuration).
-
-
-5. Programming U-Boot into FLASH with GERMS
-============================================
-
-The current version of the ADNP/ESC1 port with the default
-configuration settings occupies about 97 KBytes of flash.
-A minimal configuration occupies less than 70 KByte
-(network, SPI, POST and board command support disabled). You
-can save more memory by deactivating the Hu-Shell support and
-long command help (CONFIG_SYS_HUSH_PARSER, CONFIG_SYS_LONGHELP).
-
-To program U-Boot into the ADNP/ESC1 flash using GERMS do the
-following:
-
-1. Download U-Boot to its target run space in SDRAM:
-
- a. Close jumper RCM_EN# and push the reset button.
-
- b. From the command line, download U-Boot using the
- nios-run:
-
- $ nios-run -r u-boot.srec
-
- NOTE: In some cases this want fail. I don't know why,
- but try again.
-
-This takes about 1 minute (GERMS is not very speedy here).
-After u-boot is downloaded it will be executed. You should
-see the following:
-
- U-Boot 1.0.2 (Jan 30 2004 - 12:59:15)
-
- CPU: Nios-32 Rev. 3.3 (0x3038)
- Reg file size: 512 LO_LIMIT/HI_LIMIT: 1/30
- Board: SSV DilNetPC ADNP/ESC1
- Conf.: SSV Base 32 (nios_32)
- In: serial
- Out: serial
- Err: serial
- ADNPESC1 >
-
-
-2. Quit nios-run and start your terminal application (e.g. start
- Hyperterminal or minicom).
-
-3. Download the u-boot code to RAM. When using Hyperterminal, do the
- following:
-
- a. From the u-boot command prompt start a binary download to SDRAM:
-
- at the SSV Basis 32 to SDRAM:
-
- ==> loadb 2000100
-
- b. Download u-boot.bin using kermit.
-
-4. From the U-Boot command prompt, erase flash:
-
- at the SSV Basis 32 from 0x1000000 to 0x103ffff:
-
- ==> protect off 1:0-3
- ==> erase 1:0-3
-
-5. Copy the binary image from SDRAM to flash:
-
- at the SSV Basis 32 from SDRAM:
-
- ==> cp.b 2000100 1000000 $filesize
-
-U-Boot will now automatically start when the board is powered on or
-reset using the SSV Basis 32 configuration without closed RCM jumper.
-To start U-Boot with closed RCM Jumper, enter the following GERMS
-command:
-
- + g 1000000
-
-
-6. Autoboot
-===========
-
-U-Boot will try to boot a valid Nios application from Flash. For this
-it will use the deposited Hu-Shell script in environment variable
-'bootcmd' which is looking for a valid Nios application identifier
-string in Flash and go on at even its entry address. For more
-information see the next chapter.
-
-
-7. U-Boot environment convention and update philosophy
-======================================================
-
-U-Boot for the SSV ADNP/ESC1 target knows about many environment
-variables used to control the startup process, update process for
-raw Nios applications, and optionally file system image updates.
-In default configuration there are two Hu-Shell scripts to update
-the Nios application and/or the file system image:
-
-1. Update Nios application (ex. the uCLinux kernel):
-
- run 'appl_update'
-
-2. Update optional file system image (ex. RomFS image used by uCLinux):
-
- run 'fs_update'
-
-The Nios application can be any programm code generated in relation
-to the Nios application identifier -- the string "Nios" at offset
-address 0x0c. To use the scripts like described above in a secure way
-you have to check-up the next environment variables:
-
-1. update_allowed
-
- - Update switch -- must be set to '1' (one) to allow any update
- - default is '0' (zero)
-
- NOTE: You should avoid to save this variable with non zero
- value to Flash. Otherwise it would be allow any
- update process at any time!
-
-2. appl_entry_addr
-
- - Nios application area start address (usually in Flash)
- - this is the startup address for autoboot
- - each Nios application code we want to update will be copied
- to this address
- - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY
-
-3. appl_end_addr
-
- - Nios application area end address (usually in Flash)
- - will be used to unprotect/erase the Flash area while updating
- - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_END
-
-4. appl_ident_addr
-
- - address of the Nios application identification string
- - this is the address checked-up by autoboot
- - default is CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT
-
-5. appl_ident_str
-
- - the Nios application identification string itself
- - default is CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER
-
-6. appl_name
-
- - name of file we have to download/update
- - default is ADNPESC1/base32/linux.bin
-
-7. fs_base_addr
-
- - optionally file system area start address (usually in Flash)
- - each file system we want to update will be copied to this address
- - default is CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE
-
-8. fs_end_addr
-
- - optionally file system area end address (usually in Flash)
- - will be used to unprotect/erase the Flash area while updating
- - default is CONFIG_SYS_ADNPESC1_FILESYSTEM_END
-
-9. fs_name
-
- - name of file we have to download/update
- - default is ADNPESC1/base32/romfs.img
diff --git a/doc/README.adnpesc1_base32 b/doc/README.adnpesc1_base32
deleted file mode 100644
index e6fb7a4..0000000
--- a/doc/README.adnpesc1_base32
+++ /dev/null
@@ -1,469 +0,0 @@
-
-TODO: specify IDE i/f
-
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU: "DNP_ESC1"
- 32 bit NIOS for 50 MHz
- 512 Byte for register file (30 levels)
- with out instruction cache
- with out data cache
- 2 KByte On Chip ROM with GERMS boot monitor
- with out On Chip RAM
- MSTEP multiplier
- no Debug Core
- no On Chip Instrumentation (OCI)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
- CONFIG_SYS_NIOS_CPU_ICACHE = (not present)
- CONFIG_SYS_NIOS_CPU_DCACHE = (not present)
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 512
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
- 17 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 17
- 18 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 18
- 20 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ =
- | PIO6 | CONFIG_SYS_NIOS_CPU_PIO6_IRQ = 20
- 25 | SPI0 | CONFIG_SYS_NIOS_CPU_SPI0_IRQ = 25
- 31 | PIO7 | CONFIG_SYS_NIOS_CPU_PIO7_IRQ = 31
- 32 | PIO8 | CONFIG_SYS_NIOS_CPU_PIO8_IRQ = 32
- 33 | PIO9 | CONFIG_SYS_NIOS_CPU_PIO9_IRQ = 33
- 34 | PIO10 | CONFIG_SYS_NIOS_CPU_PIO10_IRQ = 34
- 35 | PIO11 | CONFIG_SYS_NIOS_CPU_PIO11_IRQ = 35
- 36 | PIO12 | CONFIG_SYS_NIOS_CPU_PIO12_IRQ =
- | IDE0 | CONFIG_SYS_NIOS_CPU_IDE0_IRQ = 36
- 37 | PIO13 | CONFIG_SYS_NIOS_CPU_PIO13_IRQ =
- | IDE1 | CONFIG_SYS_NIOS_CPU_IDE1_IRQ = 37
-
-MEMORY: 8 MByte Flash
- 16 MByte SDRAM
-
-Timer: TIMER0: high priority programmable timer (IRQ16)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0
- CONFIG_SYS_NIOS_CPU_USER_TIMER = (not present)
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | PORTA: 8 in/outputs for general purpose usage
- PIO1 | PORTB: 8 in/outputs for general purpose usage
- PIO2 | PORTC: 4 in/outputs for general purpose usage
- PIO3 | RCM: 1 input for RCM_EN# jumper (Req.Conf.Mon.)
- PIO4 | WDTENA: 1 output to enable the on-board watchdog
- PIO5 | WDTTRIG: 1 output to trigger the on-board watchdog
- PIO6 | LAN0INT: 1 input for LAN91C111 irq input (IRQ20)
- PIO7 | INT1: 1 input for general purpose irq (IRQ31)
- PIO8 | INT2: 1 input for general purpose irq (IRQ32)
- PIO9 | INT3: 1 input for general purpose irq (IRQ33)
- PIO10| INT4: 1 input for general purpose irq (IRQ34)
- PIO11| INT5: 1 input for general purpose irq (IRQ35)
- PIO12| INT6: 1 input for general purpose irq (IRQ36)
- | IDE0INT: (same) for IDE0 irq input
- PIO13| INT7: 1 input for general purpose irq (IRQ37)
- | IDE1INT: (same) for IDE1 irq input
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_PORTA_PIO = 0
- CONFIG_SYS_NIOS_CPU_PORTB_PIO = 1
- CONFIG_SYS_NIOS_CPU_PORTC_PIO = 2
- CONFIG_SYS_NIOS_CPU_RCM_PIO = 3
- CONFIG_SYS_NIOS_CPU_WDTENA_PIO = 4
- CONFIG_SYS_NIOS_CPU_WDTTRIG_PIO = 5
- CONFIG_SYS_NIOS_CPU_LED_PIO = (not present)
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N1, RTS/CTS (IRQ17)
- UART1: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ18)
-
-SPI: SPI0: master capable, 1 slave selectable, 250kHz target clock,
- 2 usec targets delay between slave select and clock,
- data is transferred MSB-first / LSB-last (IRQ25)
-
-LAN: SMsC LAN91C111 with:
- - without offset
- - data bus width 16 bit (on-board hard wired at 32 bit bus)
- - !!! 32 bit bus access --> each address * 2 !!!
-
-IDE: (TODO)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external extension - - - - - - - - - - - - - - - - - - -
-
- 0x44000000 ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- EXT3 (CS4) : and content : : > CONFIG_SYS_NIOS_CPU_CS3_SIZE
- : unknown) : : | = 0x01000000
- | | | /
- 0x43000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS3_BASE
- | | | \
- : (real size : : |
- EXT2 (CS3) : and content : : > CONFIG_SYS_NIOS_CPU_CS2_SIZE
- : unknown) : : | = 0x01000000
- | | | /
- 0x42000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS2_BASE
- | | | \
- : (real size : : |
- EXT1 (CS2) : and content : : > CONFIG_SYS_NIOS_CPU_CS1_SIZE
- : unknown) : : | = 0x01000000
- | | | /
- 0x41000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS1_BASE
- | | | \
- : (real size : : |
- EXT0 (CS1) : and content : : > CONFIG_SYS_NIOS_CPU_CS0_SIZE
- : unknown) : : | = 0x01000000
- | | | /
- 0x40000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_CS0_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x03000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_STACK
- | . | \
- | . | | (U-Boot run-time system)
- | . | |
- | . | > CONFIG_SYS_MONITOR_LEN
- | . | | = 0x00040000
- | . | |
- | . | /
- 0x02fc0000 --+32-----------16|15------------0+ TEXT_BASE
- | . | \
- | . | > CONFIG_SYS_MALLOC_LEN (heap)
- | . | /
- --+32-----------16|15------------0+
- | . | \
- | . | > CONFIG_SYS_GBL_DATA_SIZE (global)
- | . | /
- --+32-----------16|15------------0+ CONFIG_SYS_INIT_SP (u-boot stack)
- | . | \ \
- | . | | |
- | . | | > stack area
- | . | | |
- | . | | V
- | . | |
- | . | |
- SDRAM | . | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
- | . | | = 0x01000000
- | . | |
- 0x02000100 |- - - - - - - - - - - - - - - -+-|-
- | . | | \
- | . | | |
- | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | . | | | = 0x00000100
- | | / /
- 0x02000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x02000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
- | | \
- : gap : > (space for 2nd Flash)
- | | /
- 0x01800000 ---32-----------16|15------------0-
- | sector 127 | \
- + 0x7f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 1 : | | = 0x00800000
- + 0x010000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x10000) | /
- 0x01000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00010020 ---32-----------16|15------------0-
- | | \
- | register bank | |
- | size = (real_size << 1) | |
- | real_size = 0x10 | |
- | +--------.---.---.--- | |
- | | bank 0 \ 1 \ 2 \ 3 \ | |
- | |---------------------------+ | |
- LAN91C111 | | BANK | RESERVED | | > na_enet_size
- | |- - - - - - -|- - - - - - -| | | = 0x00000020
- | | RPCR | MIR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | COUNTER | RCR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | EPH STATUS | TCR | | |
- | +---------------------------+ | /
- 0x00010000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00001040 ---32-----------16|15------------0-
- | | | \
- : : : |
- IDE1 i/f : : : > 0x00000020
- [5] : : : |
- | | | /
- 0x00001020 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE1
- | | | \
- : : : |
- IDE0 i/f : : : > 0x00000020
- [5] : : : |
- | | | /
- 0x00001000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
- | |
- : gap :
- | |
- 0x00000980 ---32-----------16|15------------0-
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO13 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO13
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO12 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO12
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO11 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000950 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO11
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO10 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO10
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO9 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000930 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO9
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO8 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000920 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO8
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO7 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000910 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO6 | interruptmask (1 bit) (rw) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
- | |
- : gap :
- | |
- 0x000008e0 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | endofpacket (16 bit) (rw) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | slaveselect (1 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- SPI0 | (reserved) | |
- [4] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | control (11 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (9 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (16 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (16 bit) (ro) | /
- 0x000008c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SPI0
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO5 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x000008b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO4 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x000008a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO3 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x00000890 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO2 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (4 bit) (rw) | /
- 0x00000880 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (8 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (8 bit) (rw) | /
- 0x00000870 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | (unused) | |
- [3] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (8 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (8 bit) (rw) | /
- 0x00000860 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [2] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00000840 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART1 | (unused) | > 0x00000020
- [1] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00000820 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [1] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00000800 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
-
- 0x00000800 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
- | : | | = 0x00000800
- | : | /
- 0x00000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
- 0x00000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x01800000 ---8-------------4|3-------------0-
- | : | \
- | : | |
- | : | > 6 MByte ROM FS
- | : | |
- | : | /
- 0x01200000 --+- - - - - - - -:- - - - - - - -+- - file system image(s)
- | : | \
- | : | |
- | : | > 1728 kByte ucLinux
- | : | |
- | : | /
- 0x01050000 --+- - - - - - - -:- - - - - - - -+- - os image(s)
- | : | \
- 0x01040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment
- | : | |
- | : | > 320 kByte U-Boot
- | : | |
- | : | |
- | : | /
- 0x01000000 --+- - - - - - - -:- - - - - - - -+- - u-boot _start()
- 0x01000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_spi.pdf
-[5] http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1c20 b/doc/README.dk1c20
deleted file mode 100644
index 3c0e41b..0000000
--- a/doc/README.dk1c20
+++ /dev/null
@@ -1,153 +0,0 @@
-
- Nios Development Kit
- Cyclone Editions
-
- Last Update: January 2, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the Altera
-Nios Development Kit, Cyclone Edition (DK-1C20). For general Nios
-information see doc/README.nios.
-
-For those interested in contributing ... see HELP WANTED section
-in doc/README.nios.
-
-Contents:
-
- 1. Files
- 2. Memory Organization
- 3. Examples
- 4. Programming U-Boot into FLASH with GERMS
- 5. Active Serial Memory Interface (ASMI) Support
-
-====================================================================
-
-1. Files
-=========
- board/altera/dk1c20/*
- include/configs/DK1C20.h
-
-2. Memory Organization
-=======================
-
- -The heap is placed below the monitor (U-Boot code).
- -Global data is placed below the heap.
- -The stack is placed below global data (&grows down).
-
-3. Examples
-============
-
-The hello_world example works fine. The default load address
-is 0x0100_0000 (the start of SDRAM).
-
-
-4. Programming U-Boot into FLASH with GERMS
-============================================
-The current version of the DK-1C20 port with the default
-configuration settings occupies about 81 KBytes of flash.
-A minimal configuration occupies less than 60 KByte (asmi
-and network support disabled).
-
-To program U-Boot into the DK-1C20 flash using GERMS do the
-following:
-
-1. From the command line, download U-Boot using the nios-run:
-
- $ nios-run -r u-boot.srec
-
-This takes about 45 seconds (GERMS is not very speedy here).
-After u-boot is downloaded it will be executed. You should
-see the following:
-
- U-Boot 1.0.0-pre (Oct 4 2003 - 07:39:24)
-
- CPU: Nios-32 Rev. 3.3 (0x3038)
- Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
- Board: Altera Nios 1C20 Development Kit
- In: serial
- Out: serial
- Err: serial
- ==>
-
-
-2. Quit nios-run and start your terminal application (e.g. start
-Hyperterminal or minicom).
-
-3. Download the u-boot code to RAM. When using Hyperterminal, do the
-following:
-
- a. From the u-boot command prompt start a binary download to SRAM:
-
- ==> loadb 800000
-
- b. Download u-boot.bin using kermit.
-
-4. From the U-Boot command prompt, erase flash 0x40000 to 0x5ffff:
-
- ==> erase 1:4-5
-
-5. Copy the binary image from SRAM to flash:
-
- ==> cp.b 800000 40000 10000
-
-U-Boot will now automatically start when the board is powered on or
-reset using the Standard-32 configuration. To start U-Boot with the
-Safe-32 configuration, enter the following GERMS command:
-
- + g 40000
-
-5. Active Serial Memory Interface (ASMI) Support
-================================================
-ASMI is fully supported in U-Boot. Please note that ASMI is supported
-only on Cyclone devices. Do not expect ASMI to work with Stratix or
-APEX devices.
-
- ************* IMPORTANT *************
- ===================================================
- IN ORDER FOR THE NIOS ASMI TO OPERATE PROPERLY, THE
- CYCLONE DEVICE MUST BE CONFIGURED USING JTAG OR ASMI.
-
-There are two techniques you can use to bootstrap the ASMI. The
-first is to use the program_epcs utility that is part of Altera's SDK.
-But I've found program_epcs to be slow and cumbersome at best.
-
-An undocumented alternative is to use the Quartus device programing
-interface:
-
- 1. Select "Active Serial" mode.
-
- 2. Choose the xxx.pof file. For example, for the standard_32
- configuration use the "standard_32.pof" file.
-
- 3. Attach your ByteBlaster to J28. Make sure you have the
- cable attached properly -- the orientation of J28 is
- different than J24 (the JTAG header). On J28, pin 1 is on
- the bottom row, left-most pin.
-
- 4. Press and hold the "Power-On Reset" switch (SW10). You will
- see the green "Loading" and red "Error" LEDs (LED3 and LED4)
- in the on state.
-
- 5. While holding down the "Power-On Reset" switch, start the
- programming sequence. This only takes about 10 seconds.
-
- 6. After programming is complete, release the "Power-On Reset"
- switch. The Cyclone device should now load its configuration
- from the EPCS4 (U59). The green "User" LED (LED 1) should be
- blinking if the device was successfully loaded via ASMI.
-
- 7. Remove the ByteBlaster cable. The cable must be removed to
- allow the Nios ASMI access to the EPCS4 device.
-
-After you have successfully programmed a configuration into the
-EPCS4, the ASMI will be used to load the Cyclone configuration
-unless the "Force Safe" switch (SW9) is pressed.
-
-NOTE: To maximize the amount of space available for program use,
-you can enable configuration compression in Quartus. With compression
-enabled, the size of the standard_32 configuration data is
-approximately 192 KBytes.
-
-To use the U-Boot ASMI commands, try typing "help asmi" at the
-command prompt. The command "asmi info" will show the current
-status of the ASMI.
diff --git a/doc/README.dk1c20_std32 b/doc/README.dk1c20_std32
deleted file mode 100644
index 2be1299..0000000
--- a/doc/README.dk1c20_std32
+++ /dev/null
@@ -1,366 +0,0 @@
-
-TODO: specify IDE i/f
- specify ASMI i/f
- specify OCI
-
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[6]
-
-CPU: "standard_32"
- 32 bit NIOS for 50 MHz
- 256 Byte for register file (15 levels)
- 4 KByte instruction cache (2 bytes in each cache line)
- 4 KByte data cache (4 bytes in each cache line)
- 2 KByte On Chip ROM with GERMS boot monitor
- no On Chip RAM
- MSTEP multiplier
- no Debug Core
- On Chip Instrumentation (OCI) enabled
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
- CONFIG_SYS_NIOS_CPU_ICACHE = 4096
- CONFIG_SYS_NIOS_CPU_DCACHE = 4096
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-OCI: (TODO)
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
- 25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25
- 30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30
- 35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35
- 40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40
- 45 | ASMI | CONFIG_SYS_NIOS_CPU_ASMI0_IRQ = 45
- 50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
-
-MEMORY: 8 MByte Flash
- 1 MByte SRAM
- 16 MByte SDRAM
-
-ASMI: (TODO) <-- ASMI part is 4M bits
-
-Timer: TIMER0: high priority programmable timer (IRQ16)
- TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1
- CONFIG_SYS_NIOS_CPU_USER_TIMER = 0
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
- PIO1 | LCD: 11 in/outputs for ASCII LCD
- PIO2 | LED: 8 outputs for user LEDs
- PIO3 | SEVENSEG: 16 outputs for user seven segment display
- PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
- PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
- PIO6 | CFPOWER: 1 output to controll CF power supply
- PIO7 | CFATASEL: 1 output to controll CF ATA card select
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0
- CONFIG_SYS_NIOS_CPU_LCD_PIO = 1
- CONFIG_SYS_NIOS_CPU_LED_PIO = 2
- CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3
- CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4
- CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5
- CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6
- CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ25)
-
-LAN: SMsC LAN91C111 with:
- - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE: (TODO)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
-
- 0x02000000 ---32-----------16|15------------0-
- | : | \
- | : | |
- SDRAM | : | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
- | : | | = 0x01000000
- | : | /
- 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x________ ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- ASMI i/f : and content : : > 0x________
- [5] : unknown) : : |
- | | | /
- 0x00920b00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ASMI0
- | |
- : gap :
- | |
- 0x00920a80 ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- IDE i/f : and content : : > 0x00000080
- [6] : unknown) : : |
- | | | /
- 0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER1 | (unused) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | (unused) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO7 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO6 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO5 | interruptmask (1 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO4 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (rw) | /
- 0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO3 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (16 bit) (wo) | /
- 0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO2 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (8 bit) (wo) | /
- 0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (11 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (11 bit) (rw) | /
- 0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | edgecapture (4 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | interruptmask (4 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (4 bit) (ro) | /
- 0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | | \
- : gap : > (space for UART1)
- | | /
- 0x00920920 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
-
- 0x00920900 -----------------------------------
- | | \
- : (real size : |
- OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE
- : unknown) : | = 0x00000100
- | | /
- 0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE
-
-- - - - - - - - - - - on chip memory - - - - - - - - - - -
-
- 0x00920800 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
- | : | | = 0x00000800
- | : | /
- 0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
- 0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
-
- 0x00920000 ---32-----------16|15------------0-
- | gap | \
- 0x00910310 --+-------------------------------| |
- | | |
- | register bank (size = 0x10) | |
- | +--------.---.---.--- | |
- | | bank 0 \ 1 \ 2 \ 3 \ | |
- | |---------------------------+ | |
- LAN91C111 | | BANK | RESERVED | | |
- | |- - - - - - -|- - - - - - -| | > na_lan91c111_size
- | | RPCR | MIR | | | = 0x00010000
- | |- - - - - - -|- - - - - - -| | |
- | | COUNTER | RCR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | EPH STATUS | TCR | | |
- | +---------------------------+ | |
- 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
- | gap | /
- 0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00900000 ---32-----------16|15------------0-
- 0x00900000 --+32-----------16|15------------0+
- | : | \ \
- | : | | |
- | : | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | : | | | = 0x00000100
- | : | | /
- 0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x008fff00 |- - - - - - - -:- - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
- | : | | \
- | : | | |
- | : | | > stack area
- | : | | |
- | : | | V
- | : | |
- SRAM | : | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
- | : | | = 0x00100000
- | : | /
- 0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
- 0x00800000 ---8-------------4|3-------------0-
- | sector 127 | \
- + 0x7f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 1 : | | = 0x00800000
- + 0x010000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x10000) | /
- 0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
-
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x00800000 ---8-------------4|3-------------0-
- | : | \
- SAFE | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00700000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- USER | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00600000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- WEB pages | : | > 2 MByte
- | : | | (provisory usable)
- | : | /
- 0x00400000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- | : | |
- | : | > 4 MByte free for use
- | : | |
- 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
- | : | /
- 0x00000000 |- - - - - - - -:- - - - - - - -+- - u-boot environment
- 0x00000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/manual/mnl_nios_board_cyclone_1c20.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf
- http://www.altera.com/literature/wp/wp_epcs_cyc.pdf
-[6] http://www.opencores.org/projects/ata/
- http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1s10 b/doc/README.dk1s10
deleted file mode 100644
index 622bef5..0000000
--- a/doc/README.dk1s10
+++ /dev/null
@@ -1,131 +0,0 @@
-
- Nios Development Kit
- Startix Editions
-
- Last Update: January 28, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the Altera
-Nios Development Kit, Startix Edition (DK-1S10). For general Nios
-information see doc/README.nios.
-
-Most stuff of this file was borrowed and based on README.dk1c20,
-the DK-1C20 related information file.
-
-For those interested in contributing ... see HELP WANTED section
-in doc/README.nios.
-
-Contents:
-
- 1. Files
- 2. Memory Organization
- 3. CPU Variations
- 4. Examples
- 5. Programming U-Boot into FLASH with GERMS
-
-====================================================================
-
-1. Files
-=========
- board/altera/dk1s10/*
- include/configs/DK1S10.h
-
-2. Memory Organization
-=======================
-
- -The heap is placed below the monitor (U-Boot code).
- -Global data is placed below the heap.
- -The stack is placed below global data (&grows down).
-
-3. CPU Variations
-=================
-
-There are more than one NIOS CPU variation for the DK-1S10. U-Boot
-supports the following CPU configurations:
-
- - Altera Standard 32 (make DK1S10_standard_32_config)
- - Microtronix LDK 2.0 (make DK1S10_mtx_ldk_20_config)
-
-4. Examples
-============
-
-The hello_world example was never tested on DK-1S10. Neverthelse
-it should work as far as possible, because the DK-1S10 port is
-more than ninetieth percents equal to the DK-1C20 port and at
-this platform the hello_world example was already tested
-successfully (see README.dk1c20).
-
-
-5. Programming U-Boot into FLASH with GERMS
-============================================
-The current version of the DK-1S10 port with the default
-configuration settings occupies about 78 KBytes of flash.
-A minimal configuration occupies less than 60 KByte
-(network support disabled).
-
-To program U-Boot into the DK-1S10 flash using GERMS do the
-following:
-
-1. From the command line, download U-Boot using the nios-run:
-
- $ nios-run -r u-boot.srec
-
-This takes about 45 seconds (GERMS is not very speedy here).
-After u-boot is downloaded it will be executed. You should
-see the following:
-
- U-Boot 1.0.2 (Jan 28 2004 - 19:02:30)
-
- CPU: Nios-32 Rev. 3.3 (0x3038)
- Reg file size: 256 LO_LIMIT/HI_LIMIT: 2/14
- Board: Altera Nios 1S10 Development Kit
- In: serial
- Out: serial
- Err: serial
- DK1S10 >
-
-
-2. Quit nios-run and start your terminal application (e.g. start
- Hyperterminal or minicom).
-
-3. Download the u-boot code to RAM. When using Hyperterminal, do the
- following:
-
- a. From the u-boot command prompt start a binary download to
- SRAM / SDRAM:
-
- at the Altera Standard 32 to SRAM:
-
- ==> loadb 800000
-
- at the Microtronix LDK 2.0 to SDRAM:
-
- ==> loadb 1010000
-
- b. Download u-boot.bin using kermit.
-
-4. From the U-Boot command prompt, erase flash:
-
- at the Altera Standard 32 from 0x40000 to 0x5ffff:
-
- ==> erase 1:4-5
-
- at the Microtronix LDK 2.0 from 0x8000000 to 0x81ffff:
-
- ==> erase 1:0-1
-
-5. Copy the binary image from SRAM / SDRAM to flash:
-
- at the Altera Standard 32 to SRAM:
-
- ==> cp.b 800000 40000 ${filesize}
-
- at the Microtronix LDK 2.0 to SDRAM:
-
- ==> cp.b 1010000 8000000 ${filesize}
-
-U-Boot will now automatically start when the board is powered on or
-reset using the Standard-32 configuration. To start U-Boot with the
-Safe-32 configuration, enter the following GERMS command:
-
- + g 40000
diff --git a/doc/README.dk1s10_mldk20 b/doc/README.dk1s10_mldk20
deleted file mode 100644
index 74e07a9..0000000
--- a/doc/README.dk1s10_mldk20
+++ /dev/null
@@ -1,286 +0,0 @@
-
-TODO: specify IDE i/f
-
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU: "LDK2"
- 32 bit NIOS for 75 MHz
- 512 Byte for register file (30 levels)
- with out instruction cache
- with out data cache
- 2 KByte On Chip ROM with GERMS boot monitor
- with out On Chip RAM
- MSTEP multiplier
- no Debug Core
- no On Chip Instrumentation (OCI)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 75000000
- CONFIG_SYS_NIOS_CPU_ICACHE = (not present)
- CONFIG_SYS_NIOS_CPU_DCACHE = (not present)
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 512
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
- 17 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 17
- 18 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 18
- 20 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 20
- 25 | IDE0 | CONFIG_SYS_NIOS_CPU_IDE0_IRQ = 25
-
-MEMORY: 8 MByte Flash
- 16 MByte SDRAM
-
-Timer: TIMER0: high priority programmable timer (IRQ16)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0
- CONFIG_SYS_NIOS_CPU_USER_TIMER = (not present)
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | CFPOWER: 1 output to controll CF power supply
- PIO1 | BUTTON: 4 inputs for user push buttons (no IRQ)
- ------+--------------------------------------------------------
- not | LCD: 11 in/outputs for ASCII LCD
- pres.| LED: 8 outputs for user LEDs
- | SEVENSEG: 16 outputs for user seven segment display
- | RECONF: 1 in/output for . . . . . . . . . . . .
- | CFPRESENT: 1 input for CF present event (IRQ35)
- | CFATASEL: 1 output to controll CF ATA card select
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 1
- CONFIG_SYS_NIOS_CPU_LCD_PIO = (not present)
- CONFIG_SYS_NIOS_CPU_LED_PIO = (not present)
- CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = (not present)
- CONFIG_SYS_NIOS_CPU_RECONF_PIO = (not present)
- CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = (not present)
- CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 0
- CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = (not present)
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N2,
- without handshake RTS/CTS (IRQ17)
- UART1: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ18)
-
-LAN: SMsC LAN91C111 with:
- - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE: (TODO)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
-
- 0x02000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_STACK
- 0x02000000 --+32-----------16|15------------0+
- | . | \ \
- | . | | |
- | . | | > stack area
- | . | | |
- | . | | V
- | . | |
- | . | |
- SDRAM | . | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
- | . | | = 0x01000000
- | . | |
- 0x01000100 |- - - - - - - - - - - - - - - -+-|-
- | . | | \
- | . | | |
- | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | . | | | = 0x00000100
- | | / /
- 0x01000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
- | sector 127 | \
- + 0x7f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 1 : | | = 0x00800000
- + 0x010000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x10000) | /
- 0x00800000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00020000 ---32-----------16|15------------0-
- | gap | \
- 0x00010310 --+-------------------------------| |
- | | |
- | register bank (size = 0x10) | |
- | +--------.---.---.--- | |
- | | bank 0 \ 1 \ 2 \ 3 \ | |
- | |---------------------------+ | |
- LAN91C111 | | BANK | RESERVED | | |
- | |- - - - - - -|- - - - - - -| | > na_enet_size
- | | RPCR | MIR | | | = 0x00010000
- | |- - - - - - -|- - - - - - -| | |
- | | COUNTER | RCR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | EPH STATUS | TCR | | |
- | +---------------------------+ | |
- 0x00010300 --+--LAN91C111_REGISTERS_OFFSET---| |
- | gap | /
- 0x00010000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00000980 ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- IDE i/f : and content : : > 0x00000080
- [5] : unknown) : : |
- | | | /
- 0x00000900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
- | | \
- : gap : > (space for PIO4..7)
- | | /
- 0x000008c0 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART1 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x000008a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1
- | | \
- : gap : > (space for PIO2..3)
- | | /
- 0x00000880 ---32-----------16|15------------0-
- | edgecapture (4 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | interruptmask (4 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (4 bit) (ro) | /
- 0x00000870 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x00000860 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00000840 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | | \
- : gap : > (space for UART2)
- | | /
- 0x00000820 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00000800 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
-
- 0x00000800 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
- | : | | = 0x00000800
- | : | /
- 0x00000000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
- 0x00000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x01000000 ---8-------------4|3-------------0-
- | : | \
- SAFE | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00f00000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- USER | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00e00000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- WEB pages | : | > 2 MByte
- | : | | (provisory usable)
- | : | /
- 0x00c00000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- | : | |
- | : | > 4 MByte free for use
- | : | |
- 0x00840000 --+- - - - - - - -:- - - - - - - -+-|- u-boot environment
- | : | /
- 0x00800000 |- - - - - - - -:- - - - - - - -+- - u-boot _start()
- 0x00800000 ---8-------------4|3-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5] http://www.opencores.org/projects/ata/
- http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1s10_std32 b/doc/README.dk1s10_std32
deleted file mode 100644
index 622b2b9..0000000
--- a/doc/README.dk1s10_std32
+++ /dev/null
@@ -1,354 +0,0 @@
-
-TODO: specify IDE i/f
- specify OCI
-
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU: "standard_32"
- 32 bit NIOS for 50 MHz
- 256 Byte for register file (15 levels)
- 4 KByte instruction cache (4 bytes in each cache line)
- 4 KByte data cache (4 bytes in each cache line)
- 2 KByte On Chip ROM with GERMS boot monitor
- 64 KByte On Chip RAM
- MSTEP multiplier
- no Debug Core
- On Chip Instrumentation (OCI) enabled
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
- CONFIG_SYS_NIOS_CPU_ICACHE = 4096
- CONFIG_SYS_NIOS_CPU_DCACHE = 4096
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-OCI: (TODO)
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
- 25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25
- 30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30
- 35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35
- 40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40
- 50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
-
-MEMORY: 8 MByte Flash
- 1 MByte SRAM
- 16 MByte SDRAM
-
-Timer: TIMER0: high priority programmable timer (IRQ16)
- TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1
- CONFIG_SYS_NIOS_CPU_USER_TIMER = 0
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
- PIO1 | LCD: 11 in/outputs for ASCII LCD
- PIO2 | LED: 8 outputs for user LEDs
- PIO3 | SEVENSEG: 16 outputs for user seven segment display
- PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
- PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
- PIO6 | CFPOWER: 1 output to controll CF power supply
- PIO7 | CFATASEL: 1 output to controll CF ATA card select
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0
- CONFIG_SYS_NIOS_CPU_LCD_PIO = 1
- CONFIG_SYS_NIOS_CPU_LED_PIO = 2
- CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3
- CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4
- CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5
- CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6
- CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ25)
-
-LAN: SMsC LAN91C111 with:
- - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE: (TODO)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
-
- 0x02000000 ---32-----------16|15------------0-
- | : | \
- | : | |
- SDRAM | : | > CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
- | : | | = 0x01000000
- | : | /
- 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SDRAM_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00920a80 ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- IDE i/f : and content : : > 0x00000080
- [5] : unknown) : : |
- | | | /
- 0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER1 | (unused) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | (unused) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO7 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO6 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO5 | interruptmask (1 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO4 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (rw) | /
- 0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO3 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (16 bit) (wo) | /
- 0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO2 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (8 bit) (wo) | /
- 0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (11 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (11 bit) (rw) | /
- 0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | edgecapture (4 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | interruptmask (4 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (4 bit) (ro) | /
- 0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | | \
- : gap : > (space for UART1)
- | | /
- 0x00920920 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
-
- 0x00920900 -----------------------------------
- | | \
- : (real size : |
- OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE
- : unknown) : | = 0x00000100
- | | /
- 0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE
-
-- - - - - - - - - - - on chip memory 2 - - - - - - - - - - -
-
- 0x00920800 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
- | : | | = 0x00000800
- | : | /
- 0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
- 0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
-
- 0x00920000 ---32-----------16|15------------0-
- | gap | \
- 0x00910310 --+-------------------------------| |
- | | |
- | register bank (size = 0x10) | |
- | +--------.---.---.--- | |
- | | bank 0 \ 1 \ 2 \ 3 \ | |
- | |---------------------------+ | |
- LAN91C111 | | BANK | RESERVED | | |
- | |- - - - - - -|- - - - - - -| | > na_lan91c111_size
- | | RPCR | MIR | | | = 0x00010000
- | |- - - - - - -|- - - - - - -| | |
- | | COUNTER | RCR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | EPH STATUS | TCR | | |
- | +---------------------------+ | |
- 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
- | gap | /
- 0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
-
-- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
-
- 0x00910000 ---32-----------16|15------------0-
- | : | \
- | : | |
- onchip RAM | : | > CONFIG_SYS_NIOS_CPU_RAM_SIZE
- | : | | = 0x00010000
- | : | /
- 0x00900000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_RAM_BASE
-
-- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
-
- 0x00900000 ---32-----------16|15------------0-
- 0x00900000 --+32-----------16|15------------0+
- | . | \ \
- | . | | |
- | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | . | | | = 0x00000100
- | . | | /
- 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
- | . | | \
- | . | | |
- | . | | > stack area
- | . | | |
- | . | | V
- | . | |
- SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
- | . | | = 0x00100000
- | | /
- 0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
- 0x00800000 ---8-------------4|3-------------0-
- | sector 127 | \
- + 0x7f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 1 : | | = 0x00800000
- + 0x010000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x10000) | /
- 0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
-
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x00800000 ---8-------------4|3-------------0-
- | : | \
- SAFE | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00700000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- USER | : | > 1 MByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00600000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- WEB pages | : | > 2 MByte
- | : | | (provisory usable)
- | : | /
- 0x00400000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- | : | |
- | : | > 4 MByte free for use
- | : | |
- 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
- | : | /
- 0x00000000 |- - - - - - - -:- - - - - - - -+- - u-boot environment
- 0x00000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s10.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5] http://www.opencores.org/projects/ata/
- http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk1s40_std32 b/doc/README.dk1s40_std32
deleted file mode 100644
index 9a0ea06..0000000
--- a/doc/README.dk1s40_std32
+++ /dev/null
@@ -1,355 +0,0 @@
-
-TODO: specify IDE i/f
- specify OCI
-
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[5]
-
-CPU: "standard_32"
- 32 bit NIOS for 50 MHz
- 256 Byte for register file (15 levels)
- 4 KByte instruction cache (4 bytes in each cache line)
- 4 KByte data cache (4 bytes in each cache line)
- 2 KByte On Chip ROM with GERMS boot monitor
- 64 KByte On Chip RAM
- MSTEP multiplier
- no Debug Core
- On Chip Instrumentation (OCI) enabled
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
- CONFIG_SYS_NIOS_CPU_ICACHE = 4096
- CONFIG_SYS_NIOS_CPU_DCACHE = 4096
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-OCI: (TODO)
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 16 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 16
- 25 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 25
- 30 | LAN91C111 | CONFIG_SYS_NIOS_CPU_LAN0_IRQ = 30
- 35 | PIO5 | CONFIG_SYS_NIOS_CPU_PIO5_IRQ = 35
- 40 | PIO0 | CONFIG_SYS_NIOS_CPU_PIO0_IRQ = 40
- 50 | TIMER1 | CONFIG_SYS_NIOS_CPU_TIMER1_IRQ = 50
-
-MEMORY: 8 MByte Flash
- 1 MByte SRAM
- 16 MByte SDRAM
-
-Timer: TIMER0: high priority programmable timer (IRQ16)
- TIMER1: low priority fixed timer for 10 ms @ 50 MHz (IRQ50)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 1
- CONFIG_SYS_NIOS_CPU_USER_TIMER = 0
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | BUTTON: 4 inputs for user push buttons (IRQ40)
- PIO1 | LCD: 11 in/outputs for ASCII LCD
- PIO2 | LED: 8 outputs for user LEDs
- PIO3 | SEVENSEG: 16 outputs for user seven segment display
- PIO4 | RECONF: 1 in/output for . . . . . . . . . . . .
- PIO5 | CFPRESENT: 1 input for CF present event (IRQ35)
- PIO6 | CFPOWER: 1 output to controll CF power supply
- PIO7 | CFATASEL: 1 output to controll CF ATA card select
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 0
- CONFIG_SYS_NIOS_CPU_LCD_PIO = 1
- CONFIG_SYS_NIOS_CPU_LED_PIO = 2
- CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 3
- CONFIG_SYS_NIOS_CPU_RECONF_PIO = 4
- CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO = 5
- CONFIG_SYS_NIOS_CPU_CFPOWER_PIO = 6
- CONFIG_SYS_NIOS_CPU_CFATASEL_PIO = 7
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ25)
-
-LAN: SMsC LAN91C111 with:
- - offset 0x300 (LAN91C111_REGISTERS_OFFSET)
- - data bus width 32 bit (LAN91C111_DATA_BUS_WIDTH)
-
-IDE: (TODO)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external memory 2 - - - - - - - - - - - - - - - - - - -
-
- 0x02000000 ---32-----------16|15------------0-
- | : | \
- | : | |
- SDRAM | : | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
- | : | | = 0x01000000
- | : | /
- 0x01000000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00920a80 ---32-----------16|15------------0-
- | | | \
- : (real size : : |
- IDE i/f : and content : : > 0x00000080
- [5] : unknown) : : |
- | | | /
- 0x00920a00 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_IDE0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER1 | (unused) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | (unused) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x009209e0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER1
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO7 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209d0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO7
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO6 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (wo) | /
- 0x009209c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO6
- | edgecapture (1 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO5 | interruptmask (1 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (ro) | /
- 0x009209b0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO5
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO4 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (1 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (1 bit) (rw) | /
- 0x009209a0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO4
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO3 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (16 bit) (wo) | /
- 0x00920990 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO2 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (8 bit) (wo) | /
- 0x00920980 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (11 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (11 bit) (rw) | /
- 0x00920970 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | edgecapture (4 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | interruptmask (4 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (4 bit) (ro) | /
- 0x00920960 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00920940 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | | \
- : gap : > (space for UART1)
- | | /
- 0x00920920 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00920900 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip debugging - - - - - - - - - - - - - - - - - - -
-
- 0x00920900 -----------------------------------
- | | \
- : (real size : |
- OCI Debug : and content : > CONFIG_SYS_NIOS_CPU_OCI_SIZE
- : unknown) : | = 0x00000100
- | | /
- 0x00920800 ----------------------------------- CONFIG_SYS_NIOS_CPU_OCI_BASE
-
-- - - - - - - - - - - on chip memory 2 - - - - - - - - - - -
-
- 0x00920800 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > CONFIG_SYS_NIOS_CPU_ROM_SIZE
- | : | | = 0x00000800
- | : | /
- 0x00920000 |- - - - - - - - - - - - - - - -+- - CONFIG_SYS_NIOS_CPU_RST_VECT
- 0x00920000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_ROM_BASE
-
-- - - - - - - - - - - external i/o - - - - - - - - - - - - - - - - - - -
-
- 0x00920000 ---32-----------16|15------------0-
- | gap | \
- 0x00910310 --+-------------------------------| |
- | | |
- | register bank (size = 0x10) | |
- | +--------.---.---.--- | |
- | | bank 0 \ 1 \ 2 \ 3 \ | |
- | |---------------------------+ | |
- LAN91C111 | | BANK | RESERVED | | |
- | |- - - - - - -|- - - - - - -| | > na_lan91c111_size
- | | RPCR | MIR | | | = 0x00010000
- | |- - - - - - -|- - - - - - -| | |
- | | COUNTER | RCR | | |
- | |- - - - - - -|- - - - - - -| | |
- | | EPH STATUS | TCR | | |
- | +---------------------------+ | |
- 0x00910300 --+--LAN91C111_REGISTERS_OFFSET---| |
- | gap | /
- 0x00910000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_LAN0_BASE
-
-- - - - - - - - - - - on chip memory 1 - - - - - - - - - - -
-
- 0x00910000 ---32-----------16|15------------0-
- | : | \
- | : | |
- onchip RAM | : | > CONFIG_SYS_NIOS_CPU_RAM_SIZE
- | : | | = 0x00010000
- | : | /
- 0x00900000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_RAM_BASE
-
-- - - - - - - - - - - external memory 1 - - - - - - - - - - - - - - - - - - -
-
- 0x00900000 ---32-----------16|15------------0-
- 0x00900000 --+32-----------16|15------------0+
- | . | \ \
- | . | | |
- | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | . | | | = 0x00000100
- | . | | /
- 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x008fff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
- | . | | \
- | . | | |
- | . | | > stack area
- | . | | |
- | . | | V
- | . | |
- SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
- | . | | = 0x00100000
- | | /
- 0x00800000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
- 0x00800000 ---8-------------4|3-------------0-
- | sector 127 | \
- + 0x7f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 1 : | | = 0x00800000
- + 0x010000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x10000) | /
- 0x00000000 ---8-------------4|3-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
-
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x00800000 ---8-------------4|3-------------0-
- | : | \
- | : | |
- SAFE | : | > 2 MByte
- FPGA conf. | : | | (NOT usable by software)
- | : | /
- 0x00600000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- USER | : | > 2 MByte
- FPGA conf. | : | | (NOT usable by software)
- | : | /
- 0x00400000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- WEB pages | : | > 2 MByte
- | : | | (provisory usable)
- | : | /
- 0x00200000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- | : | > 2 MByte free for use
- 0x00040000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
- | : | /
- 0x00000000 ---8-------------4|3-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/manual/mnl_nios_board_stratix_1s40.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5] http://www.opencores.org/projects/ata/
- http://www.t13.org/index.html
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.dk20k200_std32 b/doc/README.dk20k200_std32
deleted file mode 100644
index fc2d2a3..0000000
--- a/doc/README.dk20k200_std32
+++ /dev/null
@@ -1,242 +0,0 @@
-
-===============================================================================
- C P U , M E M O R Y , I N / O U T C O M P O N E N T S
-===============================================================================
-see also [1]-[4]
-
-CPU: "standard_32"
- 32 bit NIOS for 33.333 MHz (nasys_clock_freq = 33333000)
- 256 Byte for register file (15 levels)
- no instruction cache
- no data cache
- 1 KByte On Chip ROM with GERMS boot monitor
- no On Chip RAM
- MSTEP multiplier
- no Debug Core
- no On Chip Instrumentation (OCI) enabled
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_CLK = 50000000
- CONFIG_SYS_NIOS_CPU_ICACHE = 0
- CONFIG_SYS_NIOS_CPU_DCACHE = 0
- CONFIG_SYS_NIOS_CPU_REG_NUMS = 256
- CONFIG_SYS_NIOS_CPU_MUL = 0
- CONFIG_SYS_NIOS_CPU_MSTEP = 1
- CONFIG_SYS_NIOS_CPU_DBG_CORE = 0
-
-IRQ: Nr. | used by
- ------+--------------------------------------------------------
- 25 | TIMER0 | CONFIG_SYS_NIOS_CPU_TIMER0_IRQ = 25
- 26 | UART0 | CONFIG_SYS_NIOS_CPU_UART0_IRQ = 26
- 27 | PIO2 | CONFIG_SYS_NIOS_CPU_PIO2_IRQ = 27
- 28 | UART1 | CONFIG_SYS_NIOS_CPU_UART1_IRQ = 28 (debug)
-
-MEMORY: 1 MByte Flash
- 256 KByte SRAM
- (SDRAM with standard SODIMM only)
-
-Timer: TIMER0: high priority programmable timer (IRQ25)
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_TICK_TIMER = 0
-
-PIO: Nr. | description
- ------+--------------------------------------------------------
- PIO0 | SEVENSEG: 16 outputs for user seven segment display
- PIO1 | LED: 8 outputs for user LEDs
- PIO2 | BUTTON: 4 inputs for user push buttons (IRQ27)
- PIO3 | LCD: 11 in/outputs for ASCII LCD
-
- U-Boot CFG: CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO = 0
- CONFIG_SYS_NIOS_CPU_LED_PIO = 1
- CONFIG_SYS_NIOS_CPU_BUTTON_PIO = 2
- CONFIG_SYS_NIOS_CPU_LCD_PIO = 3
-
-UART: UART0: fixed baudrate of 115200, fixed protocol 8N2,
- without handshake RTS/CTS (IRQ26)
- UART1: fixed baudrate of 115200, fixed protocol 8N1,
- without handshake RTS/CTS (IRQ28)
-
-
-===============================================================================
- M E M O R Y M A P
-===============================================================================
-
-- - - - - - - - - - - external memory - - - - - - - - - - - - - - - - - - -
-
- 0x00200000 ---15------------8|7-------------0-
- | sector 18 | \
- + 0x0f0000 |- - - - - - - - - - - - - - - -| |
- | : | |
- Flash |- - - - : - - - -| |
- | sector 5 : | |
- + 0x020000 |- - - - - - - - -| |
- | sector 4 (size = 0x10000) | |
- + 0x010000 |- - - - - - - - - - - - - - - -| > CONFIG_SYS_NIOS_CPU_FLASH_SIZE
- | sector 3 (size = 0x08000) | | = 0x00100000
- + 0x008000 |- - - - - - - - - - - - - - - -| |
- | sector 2 (size = 0x02000) | |
- + 0x006000 |- - - - - - - - - - - - - - - -| |
- | sector 1 (size = 0x02000) | |
- + 0x004000 |- - - - - - - - - - - - - - - -| |
- | sector 0 (size = 0x04000) | /
- 0x00100000 ---15------------8|7-------------0- CONFIG_SYS_NIOS_CPU_FLASH_BASE
- | |
- : gap :
- | |
- 0x00080000 ---32-----------16|15------------0-
- 0x00080000 --+32-----------16|15------------0+
- | . | \ \
- | . | | |
- | . | | > CONFIG_SYS_NIOS_CPU_VEC_SIZE
- | . | | | = 0x00000100
- | . | | /
- 0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_VEC_BASE
- 0x0007ff00 |- - - - - - - - - - - - - - - -+-|- CONFIG_SYS_NIOS_CPU_STACK
- | . | | \
- | . | | |
- | . | | > stack area
- | . | | |
- | . | | V
- | . | |
- SRAM | . | > CONFIG_SYS_NIOS_CPU_SRAM_SIZE
- | . | | = 0x00040000
- | | /
- 0x00040000 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_SRAM_BASE
- | |
- : gap :
- : :
-
-- - - - - - - - - - - on chip i/o - - - - - - - - - - - - - - - - - - -
-
- : :
- : gap :
- | |
- 0x00000400 ---32-----------16|15------------0-
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART1 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x000004c0 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART1
- | |
- : gap :
- | |
- 0x00000490 ---32-----------16|15------------0-
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO3 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (11 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (11 bit) (rw) | /
- 0x00000480 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO3
- | edgecapture (12 bit) (rw) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO2 | interruptmask (12 bit) (rw) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (12 bit) (ro) | /
- 0x00000470 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO2
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO1 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | direction (2 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (2 bit) (rw) | /
- 0x00000460 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO1
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | snaph (16 bit) (rw) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- TIMER0 | snapl (16 bit) (rw) | |
- [3] + 0x10 |- - - - - - - - - - - - - - - -| > 0x00000020
- | periodh (16 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | periodl (16 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | control (4 bit) (rw) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | status (2 bit) (rw) | /
- 0x00000440 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_TIMER0
- | (unused) | \
- + 0x0c |- - - - - - - - - - - - - - - -| |
- PIO0 | (unused) | |
- [4] + 0x08 |- - - - - - - - - - - - - - - -| > 0x00000010
- | (unused) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | data (16 bit) (wo) | /
- 0x00000420 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_PIO0
- | (unused) | \
- + 0x1c |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x18 |- - - - - - - - - - - - - - - -| |
- | (unused) | |
- + 0x14 |- - - - - - - - - - - - - - - -| |
- UART0 | (unused) | > 0x00000020
- [2] + 0x10 |- - - - - - - - - - - - - - - -| |
- | control (10 bit) (rw) | |
- + 0x0c |- - - - - - - - - - - - - - - -| |
- | status (10 bit) (rw) | |
- + 0x08 |- - - - - - - - - - - - - - - -| |
- | txdata (8 bit) (wo) | |
- + 0x04 |- - - - - - - - - - - - - - - -| |
- | rxdata (8 bit) (ro) | /
- 0x00000400 ---32-----------16|15------------0- CONFIG_SYS_NIOS_CPU_UART0
-
-- - - - - - - - - - - on chip memory - - - - - - - - - - -
-
- 0x00000400 ---32-----------16|15------------0-
- | : | \
- | : | |
- GERMS | : | > na_boot_monitor_rom_size
- | : | | = 0x00000400
- | : | /
- 0x00000000 |- - - - - - - - - - - - - - - -+- - nasys_reset_address
- 0x00000000 ---32-----------16|15------------0- na_boot_monitor_rom
-
-
-===============================================================================
- F L A S H M E M O R Y A L L O C A T I O N
-===============================================================================
-
- 0x00200000 ---15------------8|7-------------0-
- | : | \
- SAFE | : | > 256 KByte
- FPGA conf. | : | / (NOT usable by software)
- 0x001c0000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- USER | : | > 256 KByte
- FPGA conf. | : | / (NOT usable by software)
- 0x00180000 --+- - - - - - - -:- - - - - - - -+-
- | : | \
- | : | |
- | : | > 512 KByte free for use
- 0x00140000 --+- - - - - - - -:- - - - - - - -+-|- u-boot _start()
- | : | /
- 0x00100000 ---15------------8|7-------------0-
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/ds/ds_nios_board_apex_20k200e.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.nios b/doc/README.nios
deleted file mode 100644
index 5628144..0000000
--- a/doc/README.nios
+++ /dev/null
@@ -1,366 +0,0 @@
-
- U-Boot for Nios-32
-
- Last Update: February 1, 2004
-====================================================================
-
-This file contains information regarding U-Boot and the Altera
-Nios CPU. For information regarding U-Boot and the Nios Development
-Kits see:
-
- * Cyclone Edition (DK-1C20), see doc/README.dk1c20
- * Stratix Edition (DK-1S10), see doc/README.dk1s10 (TODO)
- * Stratix Edition (DK-1S40), see doc/README.dk1s40 (TODO)
- * Stratix Edition (DK-20K200), see doc/README.dk20k200 (TODO)
-
-For informations regarding Nios Development Kit hardware overview
-and the NIOS CPU standard configuration of all known boards made by
-Altera see:
-
- * Development Kit (DK) hardware overview, see doc/README.nios_DK
- * NIOS CPU standard_32 at DK-1C20, see doc/README.dk1c20_std32
- * NIOS CPU standard_32 at DK-1S10, see doc/README.dk1s10_std32
- * NIOS CPU standard_32 at DK-1S40, see doc/README.dk1s40_std32
- * NIOS CPU standard_32 at DK-20K200, see doc/README.dk20k200_std32
-
-For those interested in contributing ... see HELP WANTED below.
-
-
-1. OVERVIEW
-------------
-
-U-Boot has been successfully tested on the Nios Cyclone development
-board using both the 'safe' and 'standard 32' configurations with
-Nios CPU revision 3.1 (CPU_ID = 0x3018). U-Boot can be used with
-or without the GERMS monitor. The initial version of U-Boot for the
-Cyclone development kit is about 60 Kbyte and will fit in a single
-sector of on-board FLASH. Only the Nios 32-bit CPU is supported.
-
-1.1 GERMS Monitor
-------------------
-If GERMS is just not enough, then U-Boot is a great antibiotic.
-You will be very pleased with its high degree of configurability
-and its rich feature set.
-
-A few of the most obvious limitations of GERMS are overcome by
-using U-Boot (See 'Brain Damage'). Most notably, you can use
-minicom or Hyperterminal (duh).
-
-1.2 Altera Source Code
------------------------
-The Nios port does NOT include ANY sources that Altera has the
-copyright. This was a conscious decision ... not an accident.
-The Altera license is not clear in terms of distributing Altera
-sources (when altera silicon is not involved). This isn't really
-a problem as little, if any, of the Altera source contains
-features that are not already available in U-Boot.
-
-1.3 Debugging via OCI
----------------------
-The Nios port supports debugging with gdb and/or nios-console
-via the JTAG port. Stubs for debugging with gdb via the serial
-port are not currently implemented.
-
-
-2. CONFIGURATION OPTIONS/SETTINGS
-----------------------------------
-
-2.1 Nios-specific Options/Settings
------------------------------------
-All configuration options/settings that are specific to Nios begin
-with "CONFIG_NIOS_", "CONFIG_SYS_NIOS_", or "CONFIG_SYS_NIOS_CPU_".
-
-The configuration follows a two-stage process. In the first stage
-the NIOS CPU core will defined like defined in Alteras SOPC Builder.
-At this point we use the "CONFIG_SYS_NIOS_CPU_" defines exclusively. For
-more informations about all the definitions you have to setup see
-into current board configurations and doc/README.nios_CFG_NIOS_CPU.
-
-In second stage we bring the NIOS CPU configuration in relation to
-U-Boot configuration options/settings. The following is a list of
-currently defined Nios-specific options/parameters used inside of
-U-Boot. If any options are related to Standard-32 Nios SDK
-excalibur.h definitions, the related definition follows the
-description).
-
-CONFIG_NIOS -- defined for all Nios-32 boards.
-
-CONFIG_SYS_NIOS_CONSOLE -- the base address of the console UART or the JTAG
- stdio port. To enable a console via JTAG, define
- CONFIG_CONSOLE_JTAG and set CGF_NIOS_CONSOLE to the base address
- of the JTAG stdio port (normally OCI base + 0x00fa). Then
- run nios-console with the -w option.
- (standard-32: nasys_uart_0 resp. na_uart1_base).
-
-CONFIG_SYS_NIOS_FIXEDBAUD -- defined if the console UART PTF fixed_baud
- parameter is set to '1'.
-
-CONFIG_SYS_NIOS_MULT_HW -- use full hardware multiply (not yet implemented).
-
-CONFIG_SYS_NIOS_MULT_MSTEP -- use hardware assisted multiply using the
- MSTEP instruction (not yet implemented).
-
-CONFIG_SYS_NIOS_TMRBASE -- the base address of the timer used to support
- xxx_timer routines (e.g. set_timer(), get_timer(), etc.).
- (standard-32: nasys_timer_1 resp. na_lo_priority_timer2_base).
-
-CONFIG_SYS_NIOS_TMRIRQ -- the interrupt request (vector number) assigned to
- the timer. (standard-32: nasys_timer_1_irq resp.
- na_low_priority_timer2_irq).
-
-CONFIG_SYS_NIOS_TMRMS -- the period of the timer in milliseconds.
-
-CONFIG_SYS_NIOS_TMRCNT -- the preloadable counter value for the timer if it has
- no fixed period.
-
-CONFIG_SYS_NIOS_ASMIBASE -- the base address of the ASMI peripheral.
- (standard-32: na_asmi_base).
-
-CONFIG_SYS_NIOS_SPIBASE -- the base address of the SPI master (!) peripheral.
- (nasys_spi_0)
-
-CONFIG_SYS_NIOS_SPIBITS -- the amount of configured SPI data bits in PTF.
- This value can be 8 or 16 only! (PTF: databits)
-
-
-2.2 Differences in U-Boot Options/Settings
--------------------------------------------
-Some 'standard' U-Boot options/settings are treated differently in
-the Nios port. These are described below.
-
-CONFIG_SYS_GBL_DATA_OFFSET -- in the Nios port, this is the offset of the
- global data structure in the Nios memory space. More simply,
- the address of global data.
-
-
-3. ASSEMBLY CODING
--------------------
-
-In browsing the assembly source files, you may notice the absence
-of the 'magic macros' (e.g. MOVIA, MOVIP, ADDIP etc.). This is
-deliberate. The documentation for the magic macros is scant and
-it is hard to find ... it does not appear in the Nios programmer's
-manual, nor does it appear in the assembler manual. Regardless,
-the macros actually do very little to improve readability anyway.
-
-With this in mind, all assembler modules use only instructions that
-appear in the Nios programmer's manual OR are directly supported
-by the nios-elf toolchain. For example, the 'dec %rB' instruction
-is an alias for 'subi %rB,1' that is supported by the assembler
-but does not appear in the programmer's manual.
-
-
-4. BOOT PROCESS
----------------
-
-4.1 Boot process over GERMS
----------------------------
-When the NIOS CPU catch a reset signal it will begin to be running
-code from CONFIG_SYS_NIOS_CPU_RST_VECT. Normally at this place it will
-find the GERMS monitor. That's the case for the generic NIOS CPU
-configuration "standard_32". When the GERMS monitor starts running,
-it performs important system initializations and then looks for
-executable code in flash, using the following steps:
-
- 1. Examining the two bytes at CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x04000C.
- 2. Examining the button 0 on the PIO CONFIG_SYS_NIOS_CPU_BUTTON_PIO.
- 3. If the button is not pressed and the two bytes contain 'N'
- and 'i', the monitor executes a CALL to location
- CONFIG_SYS_NIOS_CPU_FLASH_BASE + 0x040000.
- 4. If the code is not executed in step 3 or the code returns,
- then prints an 8-digit version number to STDOUT and waits for
- user commands from STDIN.
-
-In normal case, for "standard_32", STDIN and STDOUT are the first
-serial port.
-
-4.2 Return to GERMS command line
---------------------------------
-During the boot process, the GERMS monitor checks for the existence
-of application software in flash memory. If found, the processor
-immediately executes the code. To return program execution to the
-GERMS monitor (that is, avoid running code stored in flash memory):
-
- 1. Hold down CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
- 2. Press then release the CPU reset button.
- 3. Release CONFIG_SYS_NIOS_CPU_BUTTON_PIO, button number 0.
-
-
-5. DEBUGGING WITH GDB
----------------------
-
-Debug sessions using gdb are currently supported only via JTAG. The
-stubs for debugging via a serial port are not implemented. To enable
-the gdb JTAG stubs, simply reference _brkpt_hw_int and _brkpt_sw_int
-at vector table offsets 3 and 4, respectively. For an example, see
-board/altera/dk1c20/vectors.S.
-
-5.1 Vector Table Initialization and ROM Stubs
----------------------------------------------
-If CONFIG_ROM_STUBS is defined, the debug breakpoint and single step
-entries in the vector table are restored to their initial values
-immediately _after_ initializing the vector table. Defining this macro
-is useful when ROM-based stubs are implemented.
-
-NOTE: The default GERMS monitor does NOT implement gdb stubs, nor does
-it initialize the vector table. Therefore, when debugging U-Boot, you
-should NOT set a software breakpoint prior to vector table initialization.
-
-5.2 Starting a Debug Session
-----------------------------
-If you're not familiar with gdb, you follow these step-by-step instructions.
-These instructions are NOT the only way to start a debug session, but they
-cover most of the individual functions to get you started.
-
- 1. Start the JTAG gdb server. Open a Nios shell window and start
- the server. When the server is started you must provide the base
- address of the OCI core. For example, when using the Cyclone
- development kit (DK1C20):
-
- $ nios-gdb-server --ocibase=0x00920800 --tcpport=2342
-
- 2. Start gdb. Open a Nios shell window, change to the top-level
- U-Boot directory and start gdb, specifying the u-boot elf file:
-
- $ nios-elf-gdb u-boot
-
- 3. Update target settings. From the file menu, select
- "Target Settings ..." and select the following, then click 'Ok':
-
- Target: Remote/TCP
- Port : 2342 (same as in step 1)
- Display download dialog: checked
- All other check boxes: unchecked
-
- 4. Connect to the target. Select menu: 'Run->Connect to target'.
- You should see a dialog box indicating the you successfully connected
- to the target.
-
- 5. Download U-Boot. Select menu: 'Run->Download'.
-
- 6. Open a gdb console window and set the source directory paths.
- Select menu: 'View->Console'. In the console window, enter the
- following commands, then close the console window:
-
- (gdb) directory common
- (gdb) directory arch/nios/cpu
- (gdb) directory arch/nios/lib
- (gdb) directory board/altera/dk1c20
-
- Note that the last command is for the DK1C20 board only. If you
- are using another board, specify that board's directory.
-
- 7. Open the file board.c (using the file menu in the lower
- left hand corner). Scroll to the board_init() routine and set
- a breakpoint.
-
- 8. Run U-Boot. Just click on the run icon, or select menu:
- 'Run->Run'. U-Boot should start running, then break at your
- breakpoint.
-
- 9. Have fun & start learning more about gdb.
-
-
-5.3 For advanced Users
-----------------------
-A few notes for those more familiar with gdb.
-
- -Serial port stubs are not implemented. Sorry, but it's just not
- worth _my_ effort. The JTAG stubs work great and are ridiculously
- simple to implement.
-
- -If you need to debug the early startup code (prior to the vector
- table initialization), use the nios-console debugger.
-
- - Connect, download & run -- there are some problems here. Connect
- download and run seperately to avoid trouble.
-
-6. BRAIN DAMAGE
-----------------
-
-This section describes some of the unfortunate and avoidable aspects
-of working with the Nios CPU ... and some things you can do to
-reduce your pain.
-
-6.1 GERMS doesn't work with Hyperterminal
-------------------------------------------
-GERMS doesn't do CR/LF mapping that is compatible with Hyperterminal
-(or minicom) -- geez. Regardless of you opion of Hyperterminal, this
-sad design decision is remedied by using U-Boot.
-
-6.2 cygwin Incompatibility
----------------------------
-The version of cygwin distributed with the nios GNUPro toolchain is
-out-of-date and incompatible with the latest cygwin distributions.
-In addition, many of the standard utilities are very dated as well.
-If you try to download and build the lastest version of grep for
-example, you'll quickly realize that a native gcc is not available
-(the next topic) which leads to U-Boot build problems (following
-topic).
-
-The solution ... well, you can wait for Altera ... or build as
-set of tools for linux.
-
-6.3 No native gcc
-------------------
-I'm not sure how this one slipped through the cracks ... but it is
-a real pain. Basically, if you want to build anything for the native
-environment -- forget it! A native (cygwin) gcc is not distributed,
-and the old version of cygwin makes locating one challenging.
-
-The solution ... same as above. Just download the gcc source from
-Altera and build up a set of cross tools for your favorite linux
-distro. Anybody who wants to use an already precompiled NIOS cross
-toolchain can it found in the CDK4NIOS project hosted by Source
-Forge at http://cdk4nios.sourceforge.net.
-
-6.4 Can't build default U-Boot
--------------------------------
-By default, when you build U-Boot you will be building some native
-tools along with the target elf, bin, and srec files. Without a
-native gcc, this (obviously) causes problems.
-
-For developers using the Altera cygwin tools you can remove the
-'tools' directory from SUBDIRS in the top-level Makefile. You will
-also have to edit common/Makefile:
-
-Replace:
-env_embedded.o: env_embedded.c ../tools/envcrc
- $(CC) $(AFLAGS) -Wa,--no-warn \
- -DENV_CRC=$(shell ../tools/envcrc) \
- -c -o $@ env_embedded.c
-
-With:
-env_embedded.o: env_embedded.c
- $(CC) $(AFLAGS) -Wa,--no-warn \
- -DENV_CRC=0 \
- -c -o $@ env_embedded.c
-
-BTW, thats a 'zero' ... not the letter 'O'. And not that the
-"../tools/envcrc" dependency is removed.
-
-
-7. HELP WANTED
----------------
-
-There are plenty of areas where help is needed. Here's are some ideas
-for those interested in contributing:
-
--CompactFlash. Port & test CF/FAT.
-
--Bedbug. Develop bedbug for Nios ... or at least provide a disassemble
- command.
-
--Add boot support for ucLinux (niosnommu).
-
--Implement (don't copy Altera code) the __mulxx routines using the
- MSTEP and MUL instructions (e.g. CONFIG_SYS_NIOS_MULT_HW and CONFIG_SYS_NIOS_MULT_MSTEP).
-
-
-Regards,
-
---Scott
-<smcnutt@psyent.com>
-
---Stephan
-<linz@li-pro.net>
diff --git a/doc/README.nios_CONFIG_SYS_NIOS_CPU b/doc/README.nios_CONFIG_SYS_NIOS_CPU
deleted file mode 100644
index 3547c34..0000000
--- a/doc/README.nios_CONFIG_SYS_NIOS_CPU
+++ /dev/null
@@ -1,140 +0,0 @@
-
-===============================================================================
- C F G _ N I O S _ C P U _ * v s . N I O S S D K
-===============================================================================
-
-When ever you have to make a new NIOS CPU configuration you can use this table
-as a reference list to the original NIOS SDK symbols made by Alteras SOPC
-Builder. Look into excalibur.h and excalibur.s in your SDK path cpu_sdk/inc.
-Symbols beginning with a '[ptf]:' are coming from your SOPC sytem description
-(PTF file) in sections WIZARD_SCRIPT_ARGUMENTS or SYSTEM_BUILDER_INFO.
-
-C O R E N I O S S D K [1],[7]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_CLK nasys_clock_freq
-CONFIG_SYS_NIOS_CPU_ICACHE nasys_icache_size
-CONFIG_SYS_NIOS_CPU_DCACHE nasys_dcache_size
-CONFIG_SYS_NIOS_CPU_REG_NUMS nasys_nios_num_regs
-CONFIG_SYS_NIOS_CPU_MUL __nios_use_multiply__
-CONFIG_SYS_NIOS_CPU_MSTEP __nios_use_mstep__
-CONFIG_SYS_NIOS_CPU_STACK nasys_stack_top
-CONFIG_SYS_NIOS_CPU_VEC_BASE nasys_vector_table
-CONFIG_SYS_NIOS_CPU_VEC_SIZE nasys_vector_table_size
-CONFIG_SYS_NIOS_CPU_VEC_NUMS
-CONFIG_SYS_NIOS_CPU_RST_VECT nasys_reset_address
-CONFIG_SYS_NIOS_CPU_DBG_CORE nasys_debug_core
-CONFIG_SYS_NIOS_CPU_RAM_BASE na_onchip_ram_64_kbytes
-CONFIG_SYS_NIOS_CPU_RAM_SIZE na_onchip_ram_64_kbytes_size
-CONFIG_SYS_NIOS_CPU_ROM_BASE na_boot_monitor_rom
-CONFIG_SYS_NIOS_CPU_ROM_SIZE na_boot_monitor_rom_size
-CONFIG_SYS_NIOS_CPU_OCI_BASE nasys_oci_core
-CONFIG_SYS_NIOS_CPU_OCI_SIZE
-CONFIG_SYS_NIOS_CPU_SRAM_BASE na_ext_ram nasys_program_mem
- nasys_data_mem
-CONFIG_SYS_NIOS_CPU_SRAM_SIZE na_ext_ram_size nasys_program_mem_size
- nasys_data_mem_size
-CONFIG_SYS_NIOS_CPU_SDRAM_BASE na_sdram
-CONFIG_SYS_NIOS_CPU_SDRAM_SIZE na_sdram_size
-CONFIG_SYS_NIOS_CPU_FLASH_BASE na_ext_flash nasys_main_flash
- nasys_am29lv065d_flash_0
- nasys_flash_0
-CONFIG_SYS_NIOS_CPU_FLASH_SIZE na_ext_flash_size nasys_main_flash_size
-
-T I M E R N I O S S D K [3]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_TIMER_NUMS nasys_timer_count
-CONFIG_SYS_NIOS_CPU_TIMER[0-9] nasys_timer_[0-9]
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_IRQ nasys_timer_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_PER [ptf]:period
- [ptf]:period_units
- [ptf]:mult
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_AR [ptf]:always_run
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_FP [ptf]:fixed_period
-CONFIG_SYS_NIOS_CPU_TIMER[0-9]_SS [ptf]:snapshot
-
-U A R T N I O S S D K [2]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_UART_NUMS nasys_uart_count
-CONFIG_SYS_NIOS_CPU_UART[0-9] nasys_uart_[0-9]
-CONFIG_SYS_NIOS_CPU_UART[0-9]_IRQ nasys_uart_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_UART[0-9]_BR [ptf]:baud
-CONFIG_SYS_NIOS_CPU_UART[0-9]_DB [ptf]:data_bits
-CONFIG_SYS_NIOS_CPU_UART[0-9]_SB [ptf]:stop_bits
-CONFIG_SYS_NIOS_CPU_UART[0-9]_PA [ptf]:parity
-CONFIG_SYS_NIOS_CPU_UART[0-9]_HS [ptf]:use_cts_rts
-CONFIG_SYS_NIOS_CPU_UART[0-9]_EOP [ptf]:use_eop_register
-
-P I O N I O S S D K [4]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_PIO_NUMS nasys_pio_count
-CONFIG_SYS_NIOS_CPU_PIO[0-9] nasys_pio_[0-9]
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_IRQ nasys_pio_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_BITS [ptf]:Data_Width
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_TYPE [ptf]:has_tri
- [ptf]:has_out
- [ptf]:has_in
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_CAP [ptf]:capture
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_EDGE [ptf]:edge_type
-CONFIG_SYS_NIOS_CPU_PIO[0-9]_ITYPE [ptf]:irq_type
-
-S P I N I O S S D K [6]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_SPI_NUMS nasys_spi_count
-CONFIG_SYS_NIOS_CPU_SPI[0-9] nasys_spi_[0-9]
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_IRQ nasys_spi_[0-9]_irq
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_BITS [ptf]:databits
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_MA [ptf]:ismaster
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_SLN [ptf]:numslaves
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_TCLK [ptf]:targetclock
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_TDELAY [ptf]:targetdelay
-CONFIG_SYS_NIOS_CPU_SPI[0-9]_* [ptf]:*
-
-I D E N I O S S D K
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_IDE_NUMS nasys_usersocket_count
-CONFIG_SYS_NIOS_CPU_IDE[0-9] nasys_usersocket_[0-9]
-
-A S M I N I O S S D K [5]
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_ASMI_NUMS nasys_asmi_count
-CONFIG_SYS_NIOS_CPU_ASMI[0-9] nasys_asmi_[0-9]
-CONFIG_SYS_NIOS_CPU_ASMI[0-9]_IRQ nasys_asmi_[0-9]_irq
-
-E t h e r n e t ( L A N ) N I O S S D K
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_LAN_NUMS
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_BASE na_lan91c111
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_OFFS LAN91C111_REGISTERS_OFFSET
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_IRQ na_lan91c111_irq
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_BUSW LAN91C111_DATA_BUS_WIDTH
-CONFIG_SYS_NIOS_CPU_LAN[0-9]_TYPE
-
-s y s t e m c o m p o s i n g N I O S S D K
--------------------------------------------------------------------------------
-CONFIG_SYS_NIOS_CPU_TICK_TIMER (na_low_priority_timer2)
-CONFIG_SYS_NIOS_CPU_USER_TIMER (na_timer1)
-CONFIG_SYS_NIOS_CPU_BUTTON_PIO (na_button_pio)
-CONFIG_SYS_NIOS_CPU_LCD_PIO (na_lcd_pio)
-CONFIG_SYS_NIOS_CPU_LED_PIO (na_led_pio)
-CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO (na_seven_seg_pio)
-CONFIG_SYS_NIOS_CPU_RECONF_PIO (na_reconfig_request_pio)
-CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO (na_cf_present_pio)
-CONFIG_SYS_NIOS_CPU_CFPOWER_PIO (na_cf_power_pio)
-CONFIG_SYS_NIOS_CPU_CFATASEL_PIO (na_cf_ata_select_pio)
-CONFIG_SYS_NIOS_CPU_USER_SPI (na_spi)
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/ds/ds_nioscpu.pdf
-[2] http://www.altera.com/literature/ds/ds_nios_uart.pdf
-[3] http://www.altera.com/literature/ds/ds_nios_timer.pdf
-[4] http://www.altera.com/literature/ds/ds_nios_pio.pdf
-[5] http://www.altera.com/literature/ds/ds_nios_asmi.pdf
-[6] http://www.altera.com/literature/ds/ds_nios_spi.pdf
-[7] http://www.altera.com/literature/ds/ds_legacy_sdram_ctrl.pdf
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/README.nios_DK b/doc/README.nios_DK
deleted file mode 100644
index b119d76..0000000
--- a/doc/README.nios_DK
+++ /dev/null
@@ -1,192 +0,0 @@
-
-===============================================================================
- H A R D W A R E O V E R V I E W
-===============================================================================
-===============|===============|===============|===============|===============
- | DK20K200 | DK1C20 | DK1S10 | DK1S40
----------------|---------------|---------------|---------------|---------------
- | | | |
- Schem. Nr. | Nios Dev.Brd. | P06-08713-00 | P06-08468-01 | P06-09178-00
- Rev. | pilot. | 01 | 01 | 00
- Date | 2001/02/06 | 2003/02/20 | 2003/02/14 | 2003/05/14
-[1] | | | |
-===============|===============|===============|===============|===============
- | | | |
- FPGA | "APEX" | "Cyclon" | "Stratix" | "Stratix"
- | EP20K200E | EP1C20 | EP1S10 | EP1S40
- | | |
- | (484 FBGA) | (400 FBGA) | (780 FBGA)
-[2],[3],[4] | | |
----------------|---------------|---------------|---------------|---------------
- | |
- Clock (OSC) | 33.333 MHz | 50 MHz
- | | (with ext. supply)
- |
- | PI49FCT3805
-[5] |
----------------|---------------|---------------|---------------|---------------
- | |
- Flash | 1 MByte | 8 MByte
- | |
- | AM29LV800BB | AM29LV065DU120REI
- | 8/16 bit bus | 8 bit bus
- | 1 chip | 1 chip
-[6],[7] | |
----------------|---------------|---------------|---------------|---------------
- | | |
- serial | no such | 4 MBits | no such
- Flash | | |
- | | EPCS4SI8 |
-[8] | | |
----------------|---------------|---------------|---------------|---------------
- | |
- Compact | no such, as | see below: prototype adapter
- Flash (CF) | module only |
- | |
----------------|---------------|---------------|---------------|---------------
- | |
- SRAM | 256 KByte | 1 MByte
- | |
- | IDT71V016S | IDT71V416S10PH
- | 32 bit bus | 32 bit bus
- | 2 chips | 2 chips
- | interlaced | interlaced
-[9],[10] | |
----------------|---------------|---------------|---------------|---------------
- | |
- SDRAM | SODIMM only | 16 MByte
- | |
- | | MT48LC4M32B2TG-7
- | 64 bit bus | 32 bit bus
- | | 1 chip
-[11] | |
-===============|===============|===============|===============|===============
- | |
- serial I/O | 1 RS232 | 2 RS232
- | |
- | LTC1386 | MAX3237CAI
- | |
- | port 1: | port 1:
- | RxD / TxD, | RxD / TxD,
- | RTS / CTS | RTS / CTS, DTR / DSR, DCD, RI
- | |
- | ! ! ! ! ! ! | port 2: | port 2:
- | RTS/CTS can | RxD / TxD | RxD / TxD
- | be RxD/TxD | | RTS / CTS, DTR / DSR
- | of 2nd port | | DCD, RI
-[12],[13] | ! ! ! ! ! ! | |
----------------|---------------|---------------|---------------|---------------
- | |
- Ethernet | no such, as | 1 10BaseT / 100BaseT
- | module only |
- | | LAN91C111-NE
- | | 32 bit bus
- | | no external EEPROM
- | | LEDA# for link
- | | LEDB# for Rx / Tx
-[14] | |
-===============|===============|===============|===============|===============
- | |
- user | 8 | no such
- switches | SW[7..0] |
- | |
----------------|---------------|---------------|---------------|---------------
- |
- user push | 4
- buttons | PB[3..0]
- |
----------------|---------------|---------------|---------------|---------------
- | |
- user LEDs | 2 | 8
- | LED[1..0] | LED[7..0]
- | |
----------------|---------------|---------------|---------------|---------------
- |
- user seven | 2
- segment | HEX[1..0][G..A,DP]
- |
-===============|===============|===============|===============|===============
- | |
- 3.3V proto- | w/o level | no such -- only 5V
- type adapter | shift buffer |
- | |
- | 40 I/O pins |
- | 1 card sel. |
- | 1 reset out. |
- | 1 OSC clock |
- | 1 CPU clock |
- | 1 clock out. |
- | |
----------------|---------------|---------------|---------------|---------------
- | |
- 5V prototype | with level | 2 ports -- both card ports supplied with its
- adapter | shift buffer | own level shift buffer
- | |
- | 40 I/O pins | port 1 & 2:
- | 1 card sel. | 41 I/O pins
- | 1 Vee ? ? ? | 1 card select
- | 1 reset out. | 1 reset output (from dev/board)
- | 1 OSC clock | 1 OSC clock (from dev/board)
- | 1 CPU clock | 1 CPU clock (from dev/board)
- | 1 clock inp. | 1 clock input (to dev/board)
- | |
- | | (special) port 1:
- | | 1 CF select
- | | 1 CF present
- | | 1 CF ATA select
- | | 1 CF power
- | |
- | | NOTE: Both card ports are prepared for raw
- | | IDE working. You can connect such
- | | devices directly to the 40 pin header.
- | | The signal PDIAG (passed diagnostic)
- | | is not connected to any I/O signal.
- | | Card port 1 is hard wired to the on
- | | board Copact Flash adapter together
- | | with all other signals needed by CF
- | | cards. Hot plug should be working too.
-[15],[16] | |
-===============|===============|===============|===============|===============
- | |
- config. CPLD | EPM7064 | EPM7128
- | |
- (alternative | decition by | decision by
- FPGA conf.) | jumper | push button
- | |
- | FPGA config. | FPGA config. | FPGA config.
- | from Flash | from Flash | from Flash
- | only | and EPCS4 | only
- | | |
-===============|===============|===============|===============|===============
-===============================================================================
-
-
-===============================================================================
- R E F E R E N C E S
-===============================================================================
-[1] http://www.altera.com/literature/lit-nio.jsp
-[2] http://www.altera.com/literature/lit-apx.jsp
-[3] http://www.altera.com/literature/lit-cyc.jsp
-[4] http://www.altera.com/literature/lit-stx.jsp
-[5] http://www.pericom.com/pdf/datasheets/PI49FCT3805.pdf
- http://www.pericom.com/products/clock/psempart.php?productID=PI49FCT3805
-[6] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1532,00.html
- http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/21490.pdf
-[7] http://www.amd.com/us-en/FlashMemory/ProductInformation/0,,37_1447_1623_1468^1596,00.html
- http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/23544b.pdf
-[8] http://www.altera.com/literature/lit-config.html
- http://preview.altera.com/literature/ds/micron.pdf
-[9] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V016SA.html
-[10] http://www.idt.com/products/pages/Asynchronous_SRAMs-71V416SL.html
-[11] http://www.micron.com/products/dram/sdram/part.aspx?part=MT48LC4M32B2TG-7
-[12] http://www.linear.com/prod/datasheet.html?datasheet=33
- http://www.linear.com/pdf/1386fa.pdf
-[13] http://www.maxim-ic.com/quick_view2.cfm/qv_pk/1068/ln/en
- http://pdfserv.maxim-ic.com/en/ds/MAX3222-MAX3241.pdf
-[14] http://www.smsc.com/main/catalog/lan91c111.html
-[15] http://www.t13.org/index.html
-[16] http://www.compactflash.org/faqs/faq.htm
-
-
-===============================================================================
-Stephan Linz <linz@li-pro.net>
diff --git a/doc/uImage.FIT/source_file_format.txt b/doc/uImage.FIT/source_file_format.txt
index 157936e..6d20707 100644
--- a/doc/uImage.FIT/source_file_format.txt
+++ b/doc/uImage.FIT/source_file_format.txt
@@ -173,8 +173,7 @@
- arch : Architecture name, mandatory for types: "standalone", "kernel",
"firmware", "ramdisk" and "fdt". Valid architecture names are: "alpha",
"arm", "i386", "ia64", "mips", "mips64", "ppc", "s390", "sh", "sparc",
- "sparc64", "m68k", "nios", "microblaze", "nios2", "blackfin", "avr32",
- "st200".
+ "sparc64", "m68k", "microblaze", "nios2", "blackfin", "avr32", "st200".
- entry : entry point address, address size is determined by
'#address-cells' property of the root node. Mandatory for for types:
"standalone" and "kernel".
diff --git a/examples/standalone/stubs.c b/examples/standalone/stubs.c
index 0187708..f3e1ab5 100644
--- a/examples/standalone/stubs.c
+++ b/examples/standalone/stubs.c
@@ -65,23 +65,6 @@
" lw $25, %1($25)\n" \
" jr $25\n" \
: : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x * sizeof(void *)) : "t9");
-#elif defined(CONFIG_NIOS)
-/*
- * %g7 holds the pointer to the global_data. %g0 is call clobbered.
- */
-#define EXPORT_FUNC(x) \
- asm volatile ( \
-" .globl " #x "\n" \
-#x ":\n" \
-" pfx %%hi(%0)\n" \
-" movi %%g0, %%lo(%0)\n" \
-" add %%g0, %%g7\n" \
-" ld %%g0, [%%g0]\n" \
-" pfx %1\n" \
-" ld %%g0, [%%g0]\n" \
-" jmp %%g0\n" \
-" nop \n" \
- : : "i"(offsetof(gd_t, jt)), "i"(XF_ ## x) : "r0");
#elif defined(CONFIG_NIOS2)
/*
* gp holds the pointer to the global_data, r8 is call-clobbered
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index 2445f1e..6b3a274 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -708,9 +708,6 @@
do_fat_read (const char *filename, void *buffer, unsigned long maxsize,
int dols)
{
-#if CONFIG_NIOS /* NIOS CPU cannot access big automatic arrays */
- static
-#endif
char fnamecopy[2048];
boot_sector bs;
volume_info volinfo;
diff --git a/include/configs/ADNPESC1.h b/include/configs/ADNPESC1.h
deleted file mode 100644
index 2d4fc77..0000000
--- a/include/configs/ADNPESC1.h
+++ /dev/null
@@ -1,689 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/***********************************************************************
- * Include the whole NIOS CPU configuration.
- *
- * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
- *
- ***********************************************************************/
-
-#if defined(CONFIG_NIOS_BASE_32)
-#include <configs/ADNPESC1_base_32.h>
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
-#endif
-
-/*------------------------------------------------------------------------
- * BOARD/CPU -- TOP-LEVEL
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS 1 /* NIOS-32 core */
-#define CONFIG_ADNPESC1 1 /* SSV ADNP/ESC1 board */
-#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
-#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
-
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
-#endif
-
-#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
-
-#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
-#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-
-#else
-
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-#endif
-
-#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION - For the most part, you can put things pretty
- * much anywhere. This is pretty flexible for Nios. So here we make some
- * arbitrary choices & assume that the monitor is placed at the end of
- * a memory resource (so you must make sure TEXT_BASE is chosen
- * appropriately -- this is very important if you plan to move your
- * memory to another place as configured at this time !!!).
- *
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short /* flash word size */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-
-/* Mem addr of environment */
-#if defined(CONFIG_NIOS_BASE_32)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
-#endif
-
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
-
-#else
-#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */
-#endif
-
-/*------------------------------------------------------------------------
- * NIOS APPLICATION CODE BASE AREA
- *----------------------------------------------------------------------*/
-#if ((CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) == 0x1050000)
-#define CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "0x2000100"
-#define CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "0x1050000"
-#define CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "0x105000c"
-#define CONFIG_SYS_ADNPESC1_NIOS_APPL_END "0x11fffff"
-#define CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "0x1200000"
-#define CONFIG_SYS_ADNPESC1_FILESYSTEM_END "0x17fffff"
-#else
-#error *** CONFIG_SYS_ERROR: missing right appl.code base configuration, expand your config.h
-#endif
-#define CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "Nios"
-
-/*------------------------------------------------------------------------
- * BOOT ENVIRONMENT
- *----------------------------------------------------------------------*/
-#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
-#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF "sled boot off; "
-#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK "sled red blink; "
-#else
-#define CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF
-#define CONFIG_SYS_ADNPESC1_SLED_RED_BLINK
-#endif
-
-#define CONFIG_BOOTDELAY 5
-#define CONFIG_BOOTCOMMAND \
- "if itest.s *$appl_ident_addr == \"$appl_ident_str\"; " \
- "then " \
- "wd off; " \
- CONFIG_SYS_ADNPESC1_SLED_BOOT_OFF \
- "go $appl_entry_addr; " \
- "else " \
- CONFIG_SYS_ADNPESC1_SLED_RED_BLINK \
- "echo *** missing \"$appl_ident_str\" at $appl_ident_addr; "\
- "echo *** invalid application at $appl_entry_addr; " \
- "echo *** stop bootup...; " \
- "fi"
-
-/*------------------------------------------------------------------------
- * EXTRA ENVIRONMENT
- *----------------------------------------------------------------------*/
-#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
-#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON "sled yellow on; "
-#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF "sled yellow off; "
-#else
-#define CONFIG_SYS_ADNPESC1_SLED_YELLO_ON
-#define CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF
-#endif
-
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "update_allowed=0\0" \
- "update_load_addr=" CONFIG_SYS_ADNPESC1_UPDATE_LOAD_ADDR "\0" \
- "appl_entry_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_ENTRY "\0" \
- "appl_end_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_END "\0" \
- "appl_ident_addr=" CONFIG_SYS_ADNPESC1_NIOS_APPL_IDENT "\0" \
- "appl_ident_str=" CONFIG_SYS_ADNPESC1_NIOS_IDENTIFIER "\0" \
- "appl_name=ADNPESC1/base32/linux.bin\0" \
- "appl_update=" \
- "if itest.b $update_allowed != 0; " \
- "then " \
- CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
- "tftp $update_load_addr $appl_name; " \
- "protect off $appl_entry_addr $appl_end_addr; " \
- "era $appl_entry_addr $appl_end_addr; " \
- "cp.b $update_load_addr $appl_entry_addr $filesize; "\
- CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \
- "else " \
- "echo *** update not allowed (update_allowed=$update_allowed); "\
- "fi\0" \
- "fs_base_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_BASE "\0" \
- "fs_end_addr=" CONFIG_SYS_ADNPESC1_FILESYSTEM_END "\0" \
- "fs_name=ADNPESC1/base32/romfs.img\0" \
- "fs_update=" \
- "if itest.b $update_allowed != 0; " \
- "then " \
- CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
- "tftp $update_load_addr $fs_name; " \
- "protect off $fs_base_addr $fs_end_addr; " \
- "era $fs_base_addr $fs_end_addr; " \
- "cp.b $update_load_addr $fs_base_addr $filesize; "\
- CONFIG_SYS_ADNPESC1_SLED_YELLO_OFF \
- "else " \
- "echo *** update not allowed (update_allowed=$update_allowed); "\
- "fi\0" \
- "uboot_name=ADNPESC1/base32/u-boot.bin\0" \
- "uboot_loadnrun=" \
- "if ping $serverip; " \
- "then " \
- CONFIG_SYS_ADNPESC1_SLED_YELLO_ON \
- "tftp $update_load_addr $uboot_name; " \
- "wd off; " \
- "go $update_load_addr; " \
- "else " \
- "echo *** missing connection to $serverip; " \
- "echo *** check your network and try again...; "\
- "fi\0"
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
-
-#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
-
-#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
-#else
-#undef CONFIG_SYS_NIOS_FIXEDBAUD
-#define CONFIG_BAUDRATE 115200
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
- * so an avalon bus timer is required.
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
-
-#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
-#endif
-
-#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * WATCHDOG (or better MAX823 supervisory circuite access)
- *----------------------------------------------------------------------*/
-#define CONFIG_HW_WATCHDOG 1 /* board specific WD */
-
-#ifdef CONFIG_HW_WATCHDOG
-
-/* MAX823 supervisor -- watchdog enable port at: */
-#if (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 0)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 1)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 2)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 3)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 4)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 5)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 6)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 7)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 8)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */
-#elif (CONFIG_SYS_NIOS_CPU_WDENA_PIO == 9)
-#define CONFIG_HW_WDENA_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one WDENA_PIO in NIOS CPU config
-#endif
-
-/* MAX823 supervisor -- watchdog trigger port at: */
-#if (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 0)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO0 /* PIO0 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 1)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO1 /* PIO1 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 2)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO2 /* PIO2 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 3)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO3 /* PIO3 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 4)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO4 /* PIO4 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 5)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO5 /* PIO5 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 6)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO6 /* PIO6 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 7)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO7 /* PIO7 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 8)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO8 /* PIO8 */
-#elif (CONFIG_SYS_NIOS_CPU_WDTOG_PIO == 9)
-#define CONFIG_HW_WDTOG_BASE CONFIG_SYS_NIOS_CPU_PIO9 /* PIO9 */
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one WDTOG_PIO in NIOS CPU config
-#endif
-
-#if defined(CONFIG_NIOS_BASE_32) /* NIOS CPU specifics */
-#define CONFIG_HW_WDENA_BIT 0 /* WD enable @ Bit 0 */
-#define CONFIG_HW_WDTOG_BIT 0 /* WD trigger @ Bit 0 */
-#define CONFIG_HW_WDPORT_WRONLY 1 /* each WD port wr/only*/
-#else
-#error *** CONFIG_SYS_ERROR: missing watchdog bit configuration, expand your config.h
-#endif
-
-#endif /* CONFIG_HW_WATCHDOG */
-
-/*------------------------------------------------------------------------
- * SERIAL PERIPHAREL INTERFACE
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
-
-#define CONFIG_NIOS_SPI 1 /* SPI support active */
-#define CONFIG_SYS_NIOS_SPIBASE CONFIG_SYS_NIOS_CPU_SPI0
-#define CONFIG_SYS_NIOS_SPIBITS CONFIG_SYS_NIOS_CPU_SPI0_BITS
-
-#define CONFIG_RTC_DS1306 1 /* Dallas 1306 real time clock */
-#define CONFIG_SYS_SPI_RTC_DEVID 0 /* as 1st SPI device */
-
-#else
-#undef CONFIG_NIOS_SPI /* NO SPI support */
-#endif
-
-/*------------------------------------------------------------------------
- * Ethernet -- needs work!
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
-
-#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#define CONFIG_SMC_USE_32_BIT 1
-#else /* no */
-#undef CONFIG_SMC_USE_32_BIT
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
-
- /********************************************/
- /* !!! CS8900 is __not__ tested on NIOS !!! */
- /********************************************/
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* Using CS8900 */
-#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
- CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#undef CONFIG_CS8900_BUS16
-#define CONFIG_CS8900_BUS32
-#else /* no */
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-#endif
-
-#else
-#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
-#endif
-
-#define CONFIG_ETHADDR 02:80:ae:20:60:6f
-#define CONFIG_NETMASK 255.255.255.248
-#define CONFIG_IPADDR 192.168.161.84
-#define CONFIG_SERVERIP 192.168.161.85
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
-#endif
-
-/*------------------------------------------------------------------------
- * STATUS LEDs
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
-
-#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
-
-#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO0
-#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO0_BITS
-#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO0_TYPE == 1)
-#define STATUS_LED_WRONLY 1
-#else
-#undef STATUS_LED_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
-
-#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO1
-#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO1_BITS
-#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO1_TYPE == 1)
-#define STATUS_LED_WRONLY 1
-#else
-#undef STATUS_LED_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
-
-#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
-#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
-#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
-#define STATUS_LED_WRONLY 1
-#else
-#undef STATUS_LED_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
-#endif
-
-#define CONFIG_STATUS_LED 1 /* enable status led driver */
-
-#define STATUS_LED_BIT (1 << 0) /* LED[0] */
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
-#define STATUS_LED_BOOT 0 /* boot LED */
-
-#if (STATUS_LED_BITS > 1)
-#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 10) /* ca. 5 Hz */
-#define STATUS_LED_RED 1 /* fail LED */
-#endif
-
-#if (STATUS_LED_BITS > 2)
-#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
-#define STATUS_LED_STATE2 STATUS_LED_OFF
-#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
-#define STATUS_LED_YELLOW 2 /* info LED */
-#endif
-
-#if (STATUS_LED_BITS > 3)
-#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
-#define STATUS_LED_STATE3 STATUS_LED_OFF
-#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 2) /* ca. 1 Hz */
-#define STATUS_LED_GREEN 3 /* info LED */
-#endif
-
-#define STATUS_LED_PAR 1 /* makes status_led.h happy */
-
-#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * Diagnostics / Power On Self Tests
- *----------------------------------------------------------------------*/
-#define CONFIG_POST CONFIG_SYS_POST_RTC
-#define CONFIG_SYS_NIOS_POST_WORD_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_BSP
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DISPLAY
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_REISER
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-
-#if (CONFIG_SYS_NIOS_CPU_SPI_NUMS == 1)
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_SPI
-#endif
-
-/*------------------------------------------------------------------------
- * KGDB
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 9600
-#endif
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser
- undef to save memory */
-#define CONFIG_SYS_PROMPT "ADNPESC1 > " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 64 /* max number of command args*/
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#ifdef CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_PROMPT_HUSH_PS2 "[]> "
-#endif
-
-/* Default load address */
-#if (CONFIG_SYS_SRAM_SIZE != 0)
-
-/* default in SRAM */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE
-
-#elif (CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* default in SDRAM */
-#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#if 1
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#else
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x400000)
-#endif
-#else
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-#endif
-
-#else
-#undef CONFIG_SYS_LOAD_ADDR /* force error break */
-#endif
-
-/* MEM test area */
-#if (CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* SDRAM begin to stack area (1MB stack) */
-#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#if 0
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#else
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400000)
-#endif
-#else
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#endif
-
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
-
-#else
-#undef CONFIG_SYS_MEMTEST_START /* force error break */
-#undef CONFIG_SYS_MEMTEST_END
-#endif
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/ADNPESC1_base_32.h b/include/configs/ADNPESC1_base_32.h
deleted file mode 100644
index 1fe8d09..0000000
--- a/include/configs/ADNPESC1_base_32.h
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_ADNPESC1_BASE_32_H
-#define __CONFIG_ADNPESC1_BASE_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/ADNPESC1.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be undefined or defined with zero, example CPU without data cache / OCI:
- *
- * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
- * #define CONFIG_SYS_NIOS_CPU_DCACHE 0
- * #undef CONFIG_SYS_NIOS_CPU_OCI_BASE
- * #undef CONFIG_SYS_NIOS_CPU_OCI_SIZE
- */
-
-/* CPU core */
-#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
-#define CONFIG_SYS_NIOS_CPU_ICACHE (0) /* instruction cache */
-#define CONFIG_SYS_NIOS_CPU_DCACHE (0) /* data cache */
-#define CONFIG_SYS_NIOS_CPU_REG_NUMS 512 /* number of register */
-#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_STACK 0x03000000 /* stack top addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x02000000 /* IRQ vectors addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
-#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
-#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00000000 /* RESET vector addr */
-#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
- /* yes(1) */
-
-/* The offset address in flash to check for the Nios signature "Ni".
- * (see GM_FlashExec in germs_monitor.s) */
-#define CONFIG_SYS_NIOS_CPU_EXES_OFFS 0x0C
-
-/* on-chip extensions */
-#undef CONFIG_SYS_NIOS_CPU_RAM_BASE /* on chip RAM addr */
-#undef CONFIG_SYS_NIOS_CPU_RAM_SIZE /* 64 KB size */
-
-#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00000000 /* on chip ROM addr */
-#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
-
-#undef CONFIG_SYS_NIOS_CPU_OCI_BASE /* OCI core addr */
-#undef CONFIG_SYS_NIOS_CPU_OCI_SIZE /* size */
-
-/* timer */
-#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 1 /* number of timer */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00000840 /* TIMER0 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
- /* yes(1) */
-
-/* serial i/o */
-#define CONFIG_SYS_NIOS_CPU_UART_NUMS 2 /* number of uarts */
-
-#define CONFIG_SYS_NIOS_CPU_UART0 0x00000800 /* UART0 addr */
-#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 17 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART0_HS 1 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-#define CONFIG_SYS_NIOS_CPU_UART1 0x00000820 /* UART1 addr */
-#define CONFIG_SYS_NIOS_CPU_UART1_IRQ 18 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART1_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART1_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART1_SB 1 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART1_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART1_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART1_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-/* serial peripheral i/o */
-#define CONFIG_SYS_NIOS_CPU_SPI_NUMS 1 /* number of spis */
-
-#define CONFIG_SYS_NIOS_CPU_SPI0 0x000008c0 /* SPI0 addr */
-#define CONFIG_SYS_NIOS_CPU_SPI0_IRQ 25 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_SPI0_BITS 16 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_SPI0_MA 1 /* is master: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_SPI0_SLN 1 /* num slaves */
-#define CONFIG_SYS_NIOS_CPU_SPI0_TCLK 250000 /* clock (Hz) */
-#define CONFIG_SYS_NIOS_CPU_SPI0_TDELAY 2 /* delay (usec) */
-#define CONFIG_SYS_NIOS_CPU_SPI0_FB 0 /* first bit msb(0) */
- /* lsb(1) */
-
-/* parallel i/o */
-#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 14 /* number of parports */
-
-#define CONFIG_SYS_NIOS_CPU_PIO0 0x00000860 /* PIO0 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO0_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 8 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO1 0x00000870 /* PIO1 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 8 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO2 0x00000880 /* PIO2 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 4 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO3 0x00000890 /* PIO3 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO3 0x00000890 /* PIO3 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO4 0x000008a0 /* PIO4 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO5 0x000008b0 /* PIO5 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO5_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO6 0x00000900 /* PIO6 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO6_IRQ 20 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO7 0x00000910 /* PIO7 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO7_IRQ 31 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO8 0x00000920 /* PIO8 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO8_IRQ 32 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO8_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO8_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO8_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO8_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO8_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO9 0x00000930 /* PIO9 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO9_IRQ 33 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO9_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO9_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO9_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO9_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO9_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO10 0x00000940 /* PIO10 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO10_IRQ 34 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO10_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO10_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO10_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO10_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO10_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO11 0x00000950 /* PIO11 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO11_IRQ 35 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO11_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO11_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO11_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO11_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO11_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO12 0x00000960 /* PIO12 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO12_IRQ 36 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO12_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO12_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO12_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO12_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO12_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO13 0x00000970 /* PIO113 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO13_IRQ 37 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO13_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO13_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO13_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO13_EDGE 2 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO13_ITYPE 1 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-/* IDE i/f */
-#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 2 /* number of IDE contr. */
-
-#define CONFIG_SYS_NIOS_CPU_IDE0 0x00001000 /* IDE0 addr */
-#define CONFIG_SYS_NIOS_CPU_IDE0_IRQ 36 /* IRQ */
-
-#define CONFIG_SYS_NIOS_CPU_IDE1 0x00001020 /* IDE1 addr */
-#define CONFIG_SYS_NIOS_CPU_IDE1_IRQ 37 /* IRQ */
-
-/* memory accessibility */
-#undef CONFIG_SYS_NIOS_CPU_SRAM_BASE /* board SRAM addr */
-#undef CONFIG_SYS_NIOS_CPU_SRAM_SIZE /* 1 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x02000000 /* board SDRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x01000000 /* board Flash addr */
-#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
-
-/* LAN */
-#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
-
-#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00010000 /* LAN0 addr */
-#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS (0) /* offset */
-#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 20 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 16 /* buswidth*/
-#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
- /* cs8900(1) */
- /* ex: openmac(2) */
- /* ex: alteramac(3) */
-
-/* external extension */
-#define CONFIG_SYS_NIOS_CPU_CS0_BASE 0x40000000 /* board EXT0 addr */
-#define CONFIG_SYS_NIOS_CPU_CS0_SIZE (16*1024*1024) /* max. 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_CS1_BASE 0x41000000 /* board EXT1 addr */
-#define CONFIG_SYS_NIOS_CPU_CS1_SIZE (16*1024*1024) /* max. 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_CS2_BASE 0x42000000 /* board EXT2 addr */
-#define CONFIG_SYS_NIOS_CPU_CS2_SIZE (16*1024*1024) /* max. 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_CS3_BASE 0x43000000 /* board EXT3 addr */
-#define CONFIG_SYS_NIOS_CPU_CS3_SIZE (16*1024*1024) /* max. 16 MB size */
-
-/* symbolic redefinition (undef, if not present) */
-#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 0 /* TIMER0: tick (needed)*/
-#undef CONFIG_SYS_NIOS_CPU_USER_TIMER /* TIMERx: users choice */
-
-#define CONFIG_SYS_NIOS_CPU_PORTA_PIO 0 /* PIO0: Port A */
-#define CONFIG_SYS_NIOS_CPU_PORTB_PIO 1 /* PIO1: Port D */
-#define CONFIG_SYS_NIOS_CPU_PORTC_PIO 2 /* PIO2: Port C */
-#define CONFIG_SYS_NIOS_CPU_RCM_PIO 3 /* PIO3: RCM jumper */
-#define CONFIG_SYS_NIOS_CPU_WDENA_PIO 4 /* PIO4: watchdog enable*/
-#define CONFIG_SYS_NIOS_CPU_WDTOG_PIO 5 /* PIO5: watchdog trigg.*/
-
-/* PIOx: LED bar */
-#ifdef CONFIG_DNPEVA2 /* DNP/EVA2 base board */
-#define CONFIG_SYS_NIOS_CPU_LED_PIO CONFIG_SYS_NIOS_CPU_PORTA_PIO
-#else
-#undef CONFIG_SYS_NIOS_CPU_LED_PIO /* no LED bar */
-#endif
-
-#endif /* __CONFIG_ADNPESC1_BASE_32_H */
diff --git a/include/configs/DK1C20.h b/include/configs/DK1C20.h
deleted file mode 100644
index cdc488b..0000000
--- a/include/configs/DK1C20.h
+++ /dev/null
@@ -1,555 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- * Stephan Linz <linz@li-pro.net>
- *
- * CompactFlash/IDE:
- * (C) Copyright 2004, Shlomo Kut <skut@vyyo.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/***********************************************************************
- * Include the whole NIOS CPU configuration.
- *
- * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
- *
- ***********************************************************************/
-
-#if defined(CONFIG_NIOS_SAFE_32)
-#include <configs/DK1C20_safe_32.h>
-#elif defined(CONFIG_NIOS_STANDARD_32)
-#include <configs/DK1C20_standard_32.h>
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
-#endif
-
-/*------------------------------------------------------------------------
- * BOARD/CPU -- TOP-LEVEL
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS 1 /* NIOS-32 core */
-#define CONFIG_DK1C20 1 /* Cyclone DK-1C20 board*/
-#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
-#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
-
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
-#endif
-
-#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
-#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION - For the most part, you can put things pretty
- * much anywhere. This is pretty flexible for Nios. So here we make some
- * arbitrary choices & assume that the monitor is placed at the end of
- * a memory resource (so you must make sure TEXT_BASE is chosen
- * appropriately).
- *
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Mem addr of env */
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
-
-#else
-#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */
-#endif
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
-
-#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
-
-#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
-#else
-#undef CONFIG_SYS_NIOS_FIXEDBAUD
-#define CONFIG_BAUDRATE 115200
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
- * so an avalon bus timer is required.
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0)
-
-#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
-#endif
-
-#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * Ethernet
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
-
-#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#define CONFIG_SMC_USE_32_BIT 1
-#else /* no */
-#undef CONFIG_SMC_USE_32_BIT
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
-
- /********************************************/
- /* !!! CS8900 is __not__ tested on NIOS !!! */
- /********************************************/
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* Using CS8900 */
-#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
- CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#undef CONFIG_CS8900_BUS16
-#define CONFIG_CS8900_BUS32
-#else /* no */
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-#endif
-
-#else
-#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
-#endif
-
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.2.21
-#define CONFIG_SERVERIP 192.168.2.16
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
-#endif
-
-/*------------------------------------------------------------------------
- * STATUS LEDs
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0)
-
-#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
-
-#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
-#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
-#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
-#define STATUS_LED_WRONLY 1
-#else
-#undef STATUS_LED_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
-#endif
-
-#define CONFIG_STATUS_LED 1 /* enable status led driver */
-
-#define STATUS_LED_BIT (1 << 0) /* LED[0] */
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_BOOT 0 /* boot LED */
-
-#if (STATUS_LED_BITS > 1)
-#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 50) /* ca. 5 Hz */
-#define STATUS_LED_RED 1 /* fail LED */
-#endif
-
-#if (STATUS_LED_BITS > 2)
-#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
-#define STATUS_LED_STATE2 STATUS_LED_OFF
-#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_YELLOW 2 /* info LED */
-#endif
-
-#if (STATUS_LED_BITS > 3)
-#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
-#define STATUS_LED_STATE3 STATUS_LED_OFF
-#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_GREEN 3 /* info LED */
-#endif
-
-#define STATUS_LED_PAR 1 /* makes status_led.h happy */
-
-#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * SEVEN SEGMENT LED DISPLAY
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0)
-
-#if (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3)
-
-#define SEVENSEG_BASE CONFIG_SYS_NIOS_CPU_PIO3
-#define SEVENSEG_BITS CONFIG_SYS_NIOS_CPU_PIO3_BITS
-#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1)
-#define SEVENSEG_WRONLY 1
-#else
-#undef SEVENSEG_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case
-#endif
-
-#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */
-
-/*
- * Dual 7-Segment Display pin assignment -- read more in your
- * "Nios Development Board Reference Manual"
- *
- *
- * (U8) HI:D[15..8] (U9) LO:D[7..0]
- * ______ ______
- * | D14 | | D6 |
- * | | | |
- * D9| |D13 D1| |D5
- * |______| |______| ___
- * | D8 | | D0 | | A |
- * | | | | F|___|B
- * D10| |D12 D2| |D4 | G |
- * |______| |______| E|___|C
- * D11 * D3 * D *
- * D15 D7 DP
- *
- */
-#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */
-#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */
-#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */
-#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */
-#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */
-#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */
-#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */
-#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */
-#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */
-
-#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * ASMI - Active Serial Memory Interface.
- *
- * ASMI is for Cyclone devices only and only works when the configuration
- * is loaded via JTAG or ASMI. Please see doc/README.dk1c20 for details.
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS_ASMI /* Enable ASMI */
-#define CONFIG_SYS_NIOS_ASMIBASE CONFIG_SYS_NIOS_CPU_ASMI0 /* ASMI base address */
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DISPLAY
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-
-/*------------------------------------------------------------------------
- * COMPACT FLASH
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_IDE)
-#define CONFIG_IDE_PREINIT /* Implement id_preinit */
-#define CONFIG_SYS_IDE_MAXBUS 1 /* 1 IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1 /* 1 drive per IDE bus */
-
-#define CONFIG_SYS_ATA_BASE_ADDR 0x00920a00 /* IDE/ATA base addr */
-#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 /* IDE0 offset */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x0040 /* Data IO offset */
-#define CONFIG_SYS_ATA_REG_OFFSET 0x0040 /* Register offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 /* Alternate reg offset */
-#define CONFIG_SYS_ATA_STRIDE 4 /* Width betwix addrs */
-#define CONFIG_DOS_PARTITION
-
-/* Board-specific cf regs */
-#define CONFIG_SYS_CF_PRESENT 0x009209b0 /* CF Present PIO base */
-#define CONFIG_SYS_CF_POWER 0x009209c0 /* CF Power FET PIO base*/
-#define CONFIG_SYS_CF_ATASEL 0x009209d0 /* CF ATASEL PIO base */
-
-#endif
-
-/*------------------------------------------------------------------------
- * KGDB
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 9600
-#endif
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "DK1C20 > " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-#if (CONFIG_SYS_SRAM_SIZE != 0)
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE /* Default load address */
-#else
-#undef CONFIG_SYS_LOAD_ADDR
-#endif
-
-#if (CONFIG_SYS_SDRAM_SIZE != 0)
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE /* SDRAM til stack area */
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024)) /* 1MB stack */
-#else
-#undef CONFIG_SYS_MEMTEST_START
-#undef CONFIG_SYS_MEMTEST_END
-#endif
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/DK1C20_safe_32.h b/include/configs/DK1C20_safe_32.h
deleted file mode 100644
index 86e4869..0000000
--- a/include/configs/DK1C20_safe_32.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1C20_SAFE_32_H
-#define __CONFIG_DK1C20_SAFE_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1C20.h)
- *
- * !!! TODO !!! TODO !!!
- */
-#error *** CONFIG_SYS_ERROR: DK1C20_safe_32 have to be defined (use DK1C20_standard_32 as template)
-
-#endif /* __CONFIG_DK1C20_SAFE_32_H */
diff --git a/include/configs/DK1C20_standard_32.h b/include/configs/DK1C20_standard_32.h
deleted file mode 100644
index c08aaae..0000000
--- a/include/configs/DK1C20_standard_32.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1C20_STANDARD_32_H
-#define __CONFIG_DK1C20_STANDARD_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1C20.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
- *
- * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
- * #define CONFIG_SYS_NIOS_CPU_DCACHE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0
- */
-
-/* CPU core */
-#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
-#define CONFIG_SYS_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
-#define CONFIG_SYS_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
-#define CONFIG_SYS_NIOS_CPU_REG_NUMS 256 /* number of register */
-#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
-#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
-#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
-#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
- /* yes(1) */
-
-/* on-chip extensions */
-#define CONFIG_SYS_NIOS_CPU_RAM_BASE 0 /* on chip RAM addr */
-#define CONFIG_SYS_NIOS_CPU_RAM_SIZE 0 /* size */
-
-#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
-#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
-
-#define CONFIG_SYS_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
-#define CONFIG_SYS_NIOS_CPU_OCI_SIZE 256 /* size */
-
-/* timer */
-#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
- /* yes(1) */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
- /* yes(1) */
-
-/* serial i/o */
-#define CONFIG_SYS_NIOS_CPU_UART_NUMS 1 /* number of uarts */
-
-#define CONFIG_SYS_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
-#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 25 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-/* parallel i/o */
-#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 8 /* number of parports */
-
-#define CONFIG_SYS_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 4 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 11 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 8 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 16 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-/* IDE i/f */
-#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
-#define CONFIG_SYS_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
-
-/* active serial memory i/f */
-#define CONFIG_SYS_NIOS_CPU_ASMI_NUMS 1 /* number of ASMI */
-#define CONFIG_SYS_NIOS_CPU_ASMI0 0x00920b00 /* ASMI0 addr */
-#define CONFIG_SYS_NIOS_CPU_ASMI0_IRQ 45 /* IRQ */
-
-/* memory accessibility */
-#define CONFIG_SYS_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
-#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
-
-/* LAN */
-#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
-
-#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
-#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
-#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
-#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
- /* cs8900(1) */
- /* ex: alteramac(2) */
-
-/* symbolic redefinition (undef, if not present) */
-#define CONFIG_SYS_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
-#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
-
-#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
-#define CONFIG_SYS_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
-#define CONFIG_SYS_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
-#define CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
-#define CONFIG_SYS_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
-#define CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
-#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
-#define CONFIG_SYS_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
-
-#endif /* __CONFIG_DK1C20_STANDARD_32_H */
diff --git a/include/configs/DK1S10.h b/include/configs/DK1S10.h
deleted file mode 100644
index 6e78861..0000000
--- a/include/configs/DK1S10.h
+++ /dev/null
@@ -1,561 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/***********************************************************************
- * Include the whole NIOS CPU configuration.
- *
- * !!! HAVE TO BE HERE !!! DON'T MOVE THIS PART !!!
- *
- ***********************************************************************/
-
-#if defined(CONFIG_NIOS_SAFE_32)
-#include <configs/DK1S10_safe_32.h>
-#elif defined(CONFIG_NIOS_STANDARD_32)
-#include <configs/DK1S10_standard_32.h>
-#elif defined(CONFIG_NIOS_MTX_LDK_20)
-#include <configs/DK1S10_mtx_ldk_20.h>
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup right NIOS CPU configuration
-#endif
-
-/*------------------------------------------------------------------------
- * BOARD/CPU -- TOP-LEVEL
- *----------------------------------------------------------------------*/
-#define CONFIG_NIOS 1 /* NIOS-32 core */
-#define CONFIG_DK1S10 1 /* Stratix DK-1S10 board*/
-#define CONFIG_SYS_CLK_FREQ CONFIG_SYS_NIOS_CPU_CLK/* 50 MHz core clock */
-#define CONFIG_SYS_HZ 1000 /* 1 msec time tick */
-#define CONFIG_BOARD_EARLY_INIT_F 1 /* enable early board-spec. init*/
-
-/*------------------------------------------------------------------------
- * BASE ADDRESSES / SIZE (Flash, SRAM, SDRAM)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_SDRAM_SIZE != 0)
-
-#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_NIOS_CPU_SDRAM_BASE
-#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_NIOS_CPU_SDRAM_SIZE
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any SDRAM in NIOS CPU config
-#endif
-
-#if defined(CONFIG_SYS_NIOS_CPU_SRAM_BASE) && defined(CONFIG_SYS_NIOS_CPU_SRAM_SIZE)
-
-#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_NIOS_CPU_SRAM_BASE
-#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_NIOS_CPU_SRAM_SIZE
-
-#else
-
-#undef CONFIG_SYS_SRAM_BASE
-#undef CONFIG_SYS_SRAM_SIZE
-
-#endif
-
-#define CONFIG_SYS_VECT_BASE CONFIG_SYS_NIOS_CPU_VEC_BASE
-
-/*------------------------------------------------------------------------
- * MEMORY ORGANIZATION - For the most part, you can put things pretty
- * much anywhere. This is pretty flexible for Nios. So here we make some
- * arbitrary choices & assume that the monitor is placed at the end of
- * a memory resource (so you must make sure TEXT_BASE is chosen
- * appropriately).
- *
- * -The heap is placed below the monitor.
- * -Global data is placed below the heap.
- * -The stack is placed below global data (&grows down).
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256k */
-#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
-#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
-#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
-
-/*------------------------------------------------------------------------
- * FLASH (AM29LV065D)
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_NIOS_CPU_FLASH_BASE
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_NIOS_CPU_FLASH_SIZE
-#define CONFIG_SYS_MAX_FLASH_SECT 128 /* Max # sects per bank */
-#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* Max # of flash banks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT 8000 /* Erase timeout (msec) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT 100 /* Write timeout (msec) */
-#define CONFIG_SYS_FLASH_WORD_SIZE unsigned char /* flash word size */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup any Flash memory in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * ENVIRONMENT
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_FLASH_SIZE != 0)
-
-#define CONFIG_ENV_IS_IN_FLASH 1 /* Environment in flash */
-
-#if defined(CONFIG_NIOS_STANDARD_32)
-#define CONFIG_ENV_ADDR CONFIG_SYS_FLASH_BASE /* Mem addr of env */
-#elif defined(CONFIG_NIOS_MTX_LDK_20)
-#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup the environment base address CONFIG_ENV_ADDR
-#endif
-
-#define CONFIG_ENV_SIZE (64 * 1024) /* 64 KByte (1 sector) */
-#define CONFIG_ENV_OVERWRITE /* Serial/eth change Ok */
-
-#else
-#define CONFIG_ENV_IS_NOWHERE 1 /* NO Environment */
-#endif
-
-/*------------------------------------------------------------------------
- * CONSOLE
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_UART_NUMS != 0)
-
-#define CONFIG_SYS_NIOS_CONSOLE CONFIG_SYS_NIOS_CPU_UART0 /* 1st UART is Cons. */
-#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
-
-#if (CONFIG_SYS_NIOS_CPU_UART0_BR != 0)
-#define CONFIG_SYS_NIOS_FIXEDBAUD 1 /* Baudrate is fixed */
-#define CONFIG_BAUDRATE CONFIG_SYS_NIOS_CPU_UART0_BR
-#else
-#undef CONFIG_SYS_NIOS_FIXEDBAUD
-#define CONFIG_BAUDRATE 115200
-#endif
-
-#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one UART in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * TIMER FOR TIMEBASE -- Nios doesn't have the equivalent of ppc PIT,
- * so an avalon bus timer is required.
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_TIMER_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_TICK_TIMER)
-
-#if (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 0)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER0 /* TIMER0 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER0_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER0_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER0_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER0_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER0_FP correct
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_TICK_TIMER == 1)
-
-#define CONFIG_SYS_NIOS_TMRBASE CONFIG_SYS_NIOS_CPU_TIMER1 /* TIMER1 as tick */
-#define CONFIG_SYS_NIOS_TMRIRQ CONFIG_SYS_NIOS_CPU_TIMER1_IRQ
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 1) /* fixed period */
-
-#if (CONFIG_SYS_NIOS_CPU_TIMER1_PER >= CONFIG_SYS_HZ)
-#define CONFIG_SYS_NIOS_TMRMS (CONFIG_SYS_NIOS_CPU_TIMER1_PER / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: you have to use a timer periode greater than CONFIG_SYS_HZ
-#endif
-
-#undef CONFIG_SYS_NIOS_TMRCNT /* no preloadable counter value */
-
-#elif (CONFIG_SYS_NIOS_CPU_TIMER1_FP == 0) /* variable period */
-
-#if (CONFIG_SYS_HZ <= 1000)
-#define CONFIG_SYS_NIOS_TMRMS (1000 / CONFIG_SYS_HZ)
-#else
-#error *** CONFIG_SYS_ERROR: sorry, CONFIG_SYS_HZ have to be less than 1000
-#endif
-
-#define CONFIG_SYS_NIOS_TMRCNT (CONFIG_SYS_CLK_FREQ / CONFIG_SYS_HZ)
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to define CONFIG_SYS_NIOS_CPU_TIMER1_FP correct
-#endif
-
-#endif /* CONFIG_SYS_NIOS_CPU_TICK_TIMER */
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup at least one TIMER in NIOS CPU config
-#endif
-
-/*------------------------------------------------------------------------
- * Ethernet -- needs work!
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_LAN_NUMS == 1)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 0) /* LAN91C111 */
-
-#define CONFIG_DRIVER_SMC91111 /* Using SMC91c111 */
-#undef CONFIG_SMC91111_EXT_PHY /* Internal PHY */
-#define CONFIG_SMC91111_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#define CONFIG_SMC_USE_32_BIT 1
-#else /* no */
-#undef CONFIG_SMC_USE_32_BIT
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LAN0_TYPE == 1) /* CS8900A */
-
- /********************************************/
- /* !!! CS8900 is __not__ tested on NIOS !!! */
- /********************************************/
-#define CONFIG_NET_MULTI
-#define CONFIG_CS8900 /* Using CS8900 */
-#define CONFIG_CS8900_BASE (CONFIG_SYS_NIOS_CPU_LAN0_BASE + \
- CONFIG_SYS_NIOS_CPU_LAN0_OFFS)
-
-#if (CONFIG_SYS_NIOS_CPU_LAN0_BUSW == 32)
-#undef CONFIG_CS8900_BUS16
-#define CONFIG_CS8900_BUS32
-#else /* no */
-#define CONFIG_CS8900_BUS16
-#undef CONFIG_CS8900_BUS32
-#endif
-
-#else
-#error *** CONFIG_SYS_ERROR: invalid LAN0 chip type, check your NIOS CPU config
-#endif
-
-#define CONFIG_ETHADDR 08:00:3e:26:0a:5b
-#define CONFIG_NETMASK 255.255.255.0
-#define CONFIG_IPADDR 192.168.2.21
-#define CONFIG_SERVERIP 192.168.2.16
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to setup just one LAN only or expand your config.h
-#endif
-
-/*------------------------------------------------------------------------
- * STATUS LEDs
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_LED_PIO)
-
-#if (CONFIG_SYS_NIOS_CPU_LED_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO0 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO1 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 2)
-
-#define STATUS_LED_BASE CONFIG_SYS_NIOS_CPU_PIO2
-#define STATUS_LED_BITS CONFIG_SYS_NIOS_CPU_PIO2_BITS
-#define STATUS_LED_ACTIVE 1 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO2_TYPE == 1)
-#define STATUS_LED_WRONLY 1
-#else
-#undef STATUS_LED_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 3)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO3 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO4 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO5 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO6 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO7 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO8 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_LED_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: status LEDs at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_LED_PIO in right case
-#endif
-
-#define CONFIG_STATUS_LED 1 /* enable status led driver */
-
-#define STATUS_LED_BIT (1 << 0) /* LED[0] */
-#define STATUS_LED_STATE STATUS_LED_BLINKING
-#define STATUS_LED_BOOT_STATE STATUS_LED_OFF
-#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_BOOT 0 /* boot LED */
-
-#if (STATUS_LED_BITS > 1)
-#define STATUS_LED_BIT1 (1 << 1) /* LED[1] */
-#define STATUS_LED_STATE1 STATUS_LED_OFF
-#define STATUS_LED_PERIOD1 (CONFIG_SYS_HZ / 50) /* ca. 5 Hz */
-#define STATUS_LED_RED 1 /* fail LED */
-#endif
-
-#if (STATUS_LED_BITS > 2)
-#define STATUS_LED_BIT2 (1 << 2) /* LED[2] */
-#define STATUS_LED_STATE2 STATUS_LED_OFF
-#define STATUS_LED_PERIOD2 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_YELLOW 2 /* info LED */
-#endif
-
-#if (STATUS_LED_BITS > 3)
-#define STATUS_LED_BIT3 (1 << 3) /* LED[3] */
-#define STATUS_LED_STATE3 STATUS_LED_OFF
-#define STATUS_LED_PERIOD3 (CONFIG_SYS_HZ / 10) /* ca. 1 Hz */
-#define STATUS_LED_GREEN 3 /* info LED */
-#endif
-
-#define STATUS_LED_PAR 1 /* makes status_led.h happy */
-
-#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*------------------------------------------------------------------------
- * SEVEN SEGMENT LED DISPLAY
- *----------------------------------------------------------------------*/
-#if (CONFIG_SYS_NIOS_CPU_PIO_NUMS != 0) && defined(CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO)
-
-#if (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 0)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO0 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 1)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO1 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 2)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO2 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 3)
-
-#define SEVENSEG_BASE CONFIG_SYS_NIOS_CPU_PIO3
-#define SEVENSEG_BITS CONFIG_SYS_NIOS_CPU_PIO3_BITS
-#define SEVENSEG_ACTIVE 0 /* LED on for bit == 1 */
-
-#if (CONFIG_SYS_NIOS_CPU_PIO3_TYPE == 1)
-#define SEVENSEG_WRONLY 1
-#else
-#undef SEVENSEG_WRONLY
-#endif
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 4)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO4 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 5)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO5 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 6)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO6 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 7)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO7 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 8)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO8 not supported, expand your config.h
-
-#elif (CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO == 9)
-
-#error *** CONFIG_SYS_ERROR: seven segment display at PIO9 not supported, expand your config.h
-
-#else
-#error *** CONFIG_SYS_ERROR: you have to set CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO in right case
-#endif
-
-#define CONFIG_SEVENSEG 1 /* enable seven segment led driver */
-
-/*
- * Dual 7-Segment Display pin assignment -- read more in your
- * "Nios Development Board Reference Manual"
- *
- *
- * (U8) HI:D[15..8] (U9) LO:D[7..0]
- * ______ ______
- * | D14 | | D6 |
- * | | | |
- * D9| |D13 D1| |D5
- * |______| |______| ___
- * | D8 | | D0 | | A |
- * | | | | F|___|B
- * D10| |D12 D2| |D4 | G |
- * |______| |______| E|___|C
- * D11 * D3 * D *
- * D15 D7 DP
- *
- */
-#define SEVENSEG_DIGIT_HI_LO_EQUAL 1 /* high nibble equal low nibble */
-#define SEVENSEG_DIGIT_A (1 << 6) /* bit 6 is segment A */
-#define SEVENSEG_DIGIT_B (1 << 5) /* bit 5 is segment B */
-#define SEVENSEG_DIGIT_C (1 << 4) /* bit 4 is segment C */
-#define SEVENSEG_DIGIT_D (1 << 3) /* bit 3 is segment D */
-#define SEVENSEG_DIGIT_E (1 << 2) /* bit 2 is segment E */
-#define SEVENSEG_DIGIT_F (1 << 1) /* bit 1 is segment F */
-#define SEVENSEG_DIGIT_G (1 << 0) /* bit 0 is segment G */
-#define SEVENSEG_DIGIT_DP (1 << 7) /* bit 7 is decimal point */
-
-#endif /* CONFIG_SYS_NIOS_CPU_PIO_NUMS */
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_DISPLAY
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_IRQ
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_REISER
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_NFS
-#undef CONFIG_CMD_XIMG
-
-/*------------------------------------------------------------------------
- * KGDB
- *----------------------------------------------------------------------*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE 9600
-#endif
-
-/*------------------------------------------------------------------------
- * MISC
- *----------------------------------------------------------------------*/
-#define CONFIG_SYS_LONGHELP /* undef to save memory */
-#define CONFIG_SYS_PROMPT "DK1S10 > " /* Monitor Command Prompt */
-#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
-#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
-
-/* Default load address */
-#if (CONFIG_SYS_SRAM_SIZE != 0)
-
-/* default in SRAM */
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SRAM_BASE
-
-#elif (CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* default in SDRAM */
-#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#else
-#define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE
-#endif
-
-#else
-#undef CONFIG_SYS_LOAD_ADDR /* force error break */
-#endif
-
-
-/* MEM test area */
-#if (CONFIG_SYS_SDRAM_SIZE != 0)
-
-/* SDRAM begin to stack area (1MB stack) */
-#if (CONFIG_SYS_SDRAM_BASE == CONFIG_SYS_NIOS_CPU_VEC_BASE)
-#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_NIOS_CPU_VEC_SIZE)
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
-#else
-#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
-#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_INIT_SP - (1024 * 1024))
-#endif
-
-#else
-#undef CONFIG_SYS_MEMTEST_START /* force error break */
-#undef CONFIG_SYS_MEMTEST_END
-#endif
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV "nor0"
-#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET 0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT ""
-#define MTDPARTS_DEFAULT ""
-*/
-
-#endif /* __CONFIG_H */
diff --git a/include/configs/DK1S10_mtx_ldk_20.h b/include/configs/DK1S10_mtx_ldk_20.h
deleted file mode 100644
index 87a8a54..0000000
--- a/include/configs/DK1S10_mtx_ldk_20.h
+++ /dev/null
@@ -1,187 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1S10_MTX_LDK_20_H
-#define __CONFIG_DK1S10_MTX_LDK_20_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1S10.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
- *
- * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
- * #define CONFIG_SYS_NIOS_CPU_DCACHE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0
- */
-
-/* CPU core */
-#define CONFIG_SYS_NIOS_CPU_CLK 75000000 /* NIOS CPU clock */
-#define CONFIG_SYS_NIOS_CPU_ICACHE (0) /* instruction cache */
-#define CONFIG_SYS_NIOS_CPU_DCACHE (0) /* data cache */
-#define CONFIG_SYS_NIOS_CPU_REG_NUMS 512 /* number of register */
-#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_STACK 0x02000000 /* stack top addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x01000000 /* IRQ vectors addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
-#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
-#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00000000 /* RESET vector addr */
-#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
- /* yes(1) */
-
-/* The offset address in flash to check for the Nios signature "Ni".
- * (see GM_FlashExec in germs_monitor.s) */
-#define CONFIG_SYS_NIOS_CPU_EXES_OFFS 0x0C
-
-/* on-chip extensions */
-#undef CONFIG_SYS_NIOS_CPU_RAM_BASE /* on chip RAM addr */
-#undef CONFIG_SYS_NIOS_CPU_RAM_SIZE /* 64 KB size */
-
-#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00000000 /* on chip ROM addr */
-#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
-
-#undef CONFIG_SYS_NIOS_CPU_OCI_BASE /* OCI core addr */
-#undef CONFIG_SYS_NIOS_CPU_OCI_SIZE /* size */
-
-/* timer */
-#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 1 /* number of timer */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00000840 /* TIMER0 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
- /* yes(1) */
-
-/* serial i/o */
-#define CONFIG_SYS_NIOS_CPU_UART_NUMS 2 /* number of uarts */
-
-#define CONFIG_SYS_NIOS_CPU_UART0 0x00000800 /* UART0 addr */
-#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 17 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_SB 2 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-#define CONFIG_SYS_NIOS_CPU_UART1 0x000008a0 /* UART1 addr */
-#define CONFIG_SYS_NIOS_CPU_UART1_IRQ 18 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART1_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART1_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART1_SB 1 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART1_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART1_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART1_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-/* parallel i/o */
-#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 2 /* number of parports */
-
-#define CONFIG_SYS_NIOS_CPU_PIO0 0x00000860 /* PIO0 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO0_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO1 0x00000870 /* PIO1 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 4 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-/* IDE i/f */
-#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
-#define CONFIG_SYS_NIOS_CPU_IDE0 0x00000900 /* IDE0 addr */
-#define CONFIG_SYS_NIOS_CPU_IDE0_IRQ 25 /* IRQ */
-
-/* memory accessibility */
-#undef CONFIG_SYS_NIOS_CPU_SRAM_BASE /* board SRAM addr */
-#undef CONFIG_SYS_NIOS_CPU_SRAM_SIZE /* 1 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00800000 /* board Flash addr */
-#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
-
-/* LAN */
-#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
-
-#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00010000 /* LAN0 addr */
-#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
-#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 20 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
-#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
- /* cs8900(1) */
- /* ex: openmac(2) */
- /* ex: alteramac(3) */
-
-/* symbolic redefinition (undef, if not present) */
-#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 0 /* TIMER0: tick (needed)*/
-#undef CONFIG_SYS_NIOS_CPU_USER_TIMER /* TIMERx: users choice */
-
-#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 0 /* PIO0: CF power/sw. */
-#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 1 /* PIO1: buttons */
-#undef CONFIG_SYS_NIOS_CPU_LCD_PIO /* PIOx: ASCII LCD */
-#undef CONFIG_SYS_NIOS_CPU_LED_PIO /* PIOx: LED bar */
-#undef CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO /* PIOx: 7-seg. display */
-#undef CONFIG_SYS_NIOS_CPU_RECONF_PIO /* PIOx: reconf pin */
-#undef CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO /* PIOx: CF present IRQ */
-#undef CONFIG_SYS_NIOS_CPU_CFATASEL_PIO /* PIOx: CF ATA select */
-
-#endif /* __CONFIG_DK1S10_MTX_LDK_20_H */
diff --git a/include/configs/DK1S10_safe_32.h b/include/configs/DK1S10_safe_32.h
deleted file mode 100644
index ced4ef2..0000000
--- a/include/configs/DK1S10_safe_32.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1S10_SAFE_32_H
-#define __CONFIG_DK1S10_SAFE_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1S10.h)
- *
- * !!! TODO !!! TODO !!!
- */
-#error *** CONFIG_SYS_ERROR: DK1S10_safe_32 have to be defined (use DK1S10_standard_32 as template)
-
-#endif /* __CONFIG_DK1S10_SAFE_32_H */
diff --git a/include/configs/DK1S10_standard_32.h b/include/configs/DK1S10_standard_32.h
deleted file mode 100644
index e6ccaf5..0000000
--- a/include/configs/DK1S10_standard_32.h
+++ /dev/null
@@ -1,274 +0,0 @@
-/*
- * (C) Copyright 2003, Li-Pro.Net <www.li-pro.net>
- * Stephan Linz <linz@li-pro.net>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __CONFIG_DK1S10_STANDARD_32_H
-#define __CONFIG_DK1S10_STANDARD_32_H
-
-/*
- * NIOS CPU configuration. (PART OF configs/DK1S10.h)
- *
- * Here we must define CPU dependencies. Any unsupported option have to
- * be defined with zero, example CPU without data cache / OCI:
- *
- * #define CONFIG_SYS_NIOS_CPU_ICACHE 4096
- * #define CONFIG_SYS_NIOS_CPU_DCACHE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_BASE 0
- * #define CONFIG_SYS_NIOS_CPU_OCI_SIZE 0
- */
-
-/* CPU core */
-#define CONFIG_SYS_NIOS_CPU_CLK 50000000 /* NIOS CPU clock */
-#define CONFIG_SYS_NIOS_CPU_ICACHE (4 * 1024) /* instruction cache */
-#define CONFIG_SYS_NIOS_CPU_DCACHE (4 * 1024) /* data cache */
-#define CONFIG_SYS_NIOS_CPU_REG_NUMS 256 /* number of register */
-#define CONFIG_SYS_NIOS_CPU_MUL 0 /* 16x16 MUL: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_MSTEP 1 /* 16x16 MSTEP: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_STACK 0x008fff00 /* stack top addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_BASE 0x008fff00 /* IRQ vectors addr */
-#define CONFIG_SYS_NIOS_CPU_VEC_SIZE 256 /* size */
-#define CONFIG_SYS_NIOS_CPU_VEC_NUMS 64 /* numbers */
-#define CONFIG_SYS_NIOS_CPU_RST_VECT 0x00920000 /* RESET vector addr */
-#define CONFIG_SYS_NIOS_CPU_DBG_CORE 0 /* CPU debug: no(0) */
- /* yes(1) */
-
-/* on-chip extensions */
-#define CONFIG_SYS_NIOS_CPU_RAM_BASE 0x00900000 /* on chip RAM addr */
-#define CONFIG_SYS_NIOS_CPU_RAM_SIZE (64 * 1024) /* 64 KB size */
-
-#define CONFIG_SYS_NIOS_CPU_ROM_BASE 0x00920000 /* on chip ROM addr */
-#define CONFIG_SYS_NIOS_CPU_ROM_SIZE (2 * 1024) /* 2 KB size */
-
-#define CONFIG_SYS_NIOS_CPU_OCI_BASE 0x00920800 /* OCI core addr */
-#define CONFIG_SYS_NIOS_CPU_OCI_SIZE 256 /* size */
-
-/* timer */
-#define CONFIG_SYS_NIOS_CPU_TIMER_NUMS 2 /* number of timer */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER0 0x00920940 /* TIMER0 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_IRQ 16 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_PER 1000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_AR 0 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_FP 0 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER0_SS 1 /* snaphot: no(0) */
- /* yes(1) */
-
-#define CONFIG_SYS_NIOS_CPU_TIMER1 0x009209e0 /* TIMER1 addr */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_IRQ 50 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_PER 10000 /* periode usec */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_AR 1 /* always run: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_FP 1 /* fixed per: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_TIMER1_SS 0 /* snaphot: no(0) */
- /* yes(1) */
-
-/* serial i/o */
-#define CONFIG_SYS_NIOS_CPU_UART_NUMS 1 /* number of uarts */
-
-#define CONFIG_SYS_NIOS_CPU_UART0 0x00920900 /* UART0 addr */
-#define CONFIG_SYS_NIOS_CPU_UART0_IRQ 25 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_UART0_BR 115200 /* baudrate var(0) */
-#define CONFIG_SYS_NIOS_CPU_UART0_DB 8 /* data bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_SB 1 /* stop bit */
-#define CONFIG_SYS_NIOS_CPU_UART0_PA 0 /* parity none(0) */
- /* odd(1) */
- /* even(2) */
-#define CONFIG_SYS_NIOS_CPU_UART0_HS 0 /* handshake: no(0) */
- /* crts(1) */
-#define CONFIG_SYS_NIOS_CPU_UART0_EOP 0 /* eop reg: no(0) */
- /* yes(1) */
-
-/* parallel i/o */
-#define CONFIG_SYS_NIOS_CPU_PIO_NUMS 8 /* number of parports */
-
-#define CONFIG_SYS_NIOS_CPU_PIO0 0x00920960 /* PIO0 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO0_IRQ 40 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO0_BITS 4 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO0_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO0_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO1 0x00920970 /* PIO1 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO1_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO1_BITS 11 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO1_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO1_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO2 0x00920980 /* PIO2 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO2_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO2_BITS 8 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO2_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO2_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO3 0x00920990 /* PIO3 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO3_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO3_BITS 16 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO3_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO3_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO4 0x009209a0 /* PIO4 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO4_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO4_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO4_TYPE 0 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO4_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO5 0x009209b0 /* PIO5 addr */
-#define CONFIG_SYS_NIOS_CPU_PIO5_IRQ 35 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO5_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO5_TYPE 2 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_CAP 1 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_EDGE 3 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO5_ITYPE 2 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO6 0x009209c0 /* PIO6 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO6_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO6_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO6_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO6_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-#define CONFIG_SYS_NIOS_CPU_PIO7 0x009209d0 /* PIO7 addr */
-#undef CONFIG_SYS_NIOS_CPU_PIO7_IRQ /* w/o IRQ */
-#define CONFIG_SYS_NIOS_CPU_PIO7_BITS 1 /* number of bits */
-#define CONFIG_SYS_NIOS_CPU_PIO7_TYPE 1 /* io type: tris(0) */
- /* out(1) */
- /* in(2) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_CAP 0 /* capture: no(0) */
- /* yes(1) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_EDGE 0 /* edge type: none(0) */
- /* fall(1) */
- /* rise(2) */
- /* any(3) */
-#define CONFIG_SYS_NIOS_CPU_PIO7_ITYPE 0 /* IRQ type: none(0) */
- /* level(1)*/
- /* edge(2) */
-
-/* IDE i/f */
-#define CONFIG_SYS_NIOS_CPU_IDE_NUMS 1 /* number of IDE contr. */
-#define CONFIG_SYS_NIOS_CPU_IDE0 0x00920a00 /* IDE0 addr */
-
-/* memory accessibility */
-#define CONFIG_SYS_NIOS_CPU_SRAM_BASE 0x00800000 /* board SRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SRAM_SIZE (1024 * 1024) /* 1 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_SDRAM_BASE 0x01000000 /* board SDRAM addr */
-#define CONFIG_SYS_NIOS_CPU_SDRAM_SIZE (16*1024*1024) /* 16 MB size */
-
-#define CONFIG_SYS_NIOS_CPU_FLASH_BASE 0x00000000 /* board Flash addr */
-#define CONFIG_SYS_NIOS_CPU_FLASH_SIZE (8*1024*1024) /* 8 MB size */
-
-/* LAN */
-#define CONFIG_SYS_NIOS_CPU_LAN_NUMS 1 /* number of LAN i/f */
-
-#define CONFIG_SYS_NIOS_CPU_LAN0_BASE 0x00910000 /* LAN0 addr */
-#define CONFIG_SYS_NIOS_CPU_LAN0_OFFS 0x0300 /* offset */
-#define CONFIG_SYS_NIOS_CPU_LAN0_IRQ 30 /* IRQ */
-#define CONFIG_SYS_NIOS_CPU_LAN0_BUSW 32 /* buswidth*/
-#define CONFIG_SYS_NIOS_CPU_LAN0_TYPE 0 /* smc91111(0) */
- /* cs8900(1) */
- /* ex: alteramac(2) */
-
-/* symbolic redefinition (undef, if not present) */
-#define CONFIG_SYS_NIOS_CPU_USER_TIMER 0 /* TIMER0: users choice */
-#define CONFIG_SYS_NIOS_CPU_TICK_TIMER 1 /* TIMER1: tick (needed)*/
-
-#define CONFIG_SYS_NIOS_CPU_BUTTON_PIO 0 /* PIO0: buttons */
-#define CONFIG_SYS_NIOS_CPU_LCD_PIO 1 /* PIO1: ASCII LCD */
-#define CONFIG_SYS_NIOS_CPU_LED_PIO 2 /* PIO2: LED bar */
-#define CONFIG_SYS_NIOS_CPU_SEVENSEG_PIO 3 /* PIO3: 7-seg. display */
-#define CONFIG_SYS_NIOS_CPU_RECONF_PIO 4 /* PIO4: reconf pin */
-#define CONFIG_SYS_NIOS_CPU_CFPRESENT_PIO 5 /* PIO5: CF present IRQ */
-#define CONFIG_SYS_NIOS_CPU_CFPOWER_PIO 6 /* PIO6: CF power/sw. */
-#define CONFIG_SYS_NIOS_CPU_CFATASEL_PIO 7 /* PIO7: CF ATA select */
-
-#endif /* __CONFIG_DK1S10_STANDARD_32_H */
diff --git a/include/image.h b/include/image.h
index 541cac9..294eba5 100644
--- a/include/image.h
+++ b/include/image.h
@@ -100,7 +100,6 @@
#define IH_ARCH_SPARC 10 /* Sparc */
#define IH_ARCH_SPARC64 11 /* Sparc 64 Bit */
#define IH_ARCH_M68K 12 /* M68K */
-#define IH_ARCH_NIOS 13 /* Nios-32 */
#define IH_ARCH_MICROBLAZE 14 /* MicroBlaze */
#define IH_ARCH_NIOS2 15 /* Nios-II */
#define IH_ARCH_BLACKFIN 16 /* Blackfin */
@@ -493,8 +492,6 @@
if (!image_check_arch (hdr, IH_ARCH_MICROBLAZE))
#elif defined(__mips__)
if (!image_check_arch (hdr, IH_ARCH_MIPS))
-#elif defined(__nios__)
- if (!image_check_arch (hdr, IH_ARCH_NIOS))
#elif defined(__nios2__)
if (!image_check_arch (hdr, IH_ARCH_NIOS2))
#elif defined(__PPC__)
@@ -647,8 +644,6 @@
if (!fit_image_check_arch (fdt, node, IH_ARCH_MICROBLAZE))
#elif defined(__mips__)
if (!fit_image_check_arch (fdt, node, IH_ARCH_MIPS))
-#elif defined(__nios__)
- if (!fit_image_check_arch (fdt, node, IH_ARCH_NIOS))
#elif defined(__nios2__)
if (!fit_image_check_arch (fdt, node, IH_ARCH_NIOS2))
#elif defined(__PPC__)
diff --git a/include/nios-io.h b/include/nios-io.h
deleted file mode 100644
index dc7e127..0000000
--- a/include/nios-io.h
+++ /dev/null
@@ -1,183 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*************************************************************************
- * Altera Nios Standard Peripherals
- ************************************************************************/
-
-#ifndef __NIOSIO_H__
-#define __NIOSIO_H__
-
-/*------------------------------------------------------------------------
- * UART (http://www.altera.com/literature/ds/ds_nios_uart.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_uart_t {
- unsigned rxdata; /* Rx data reg */
- unsigned txdata; /* Tx data reg */
- unsigned status; /* Status reg */
- unsigned control; /* Control reg */
- unsigned divisor; /* Baud rate divisor reg */
- unsigned endofpacket; /* End-of-packet reg */
-}nios_uart_t;
-
-/* status register */
-#define NIOS_UART_PE (1 << 0) /* parity error */
-#define NIOS_UART_FE (1 << 1) /* frame error */
-#define NIOS_UART_BRK (1 << 2) /* break detect */
-#define NIOS_UART_ROE (1 << 3) /* rx overrun */
-#define NIOS_UART_TOE (1 << 4) /* tx overrun */
-#define NIOS_UART_TMT (1 << 5) /* tx empty */
-#define NIOS_UART_TRDY (1 << 6) /* tx ready */
-#define NIOS_UART_RRDY (1 << 7) /* rx ready */
-#define NIOS_UART_E (1 << 8) /* exception */
-#define NIOS_UART_DCTS (1 << 10) /* cts change */
-#define NIOS_UART_CTS (1 << 11) /* cts */
-#define NIOS_UART_EOP (1 << 12) /* eop detected */
-
-/* control register */
-#define NIOS_UART_IPE (1 << 0) /* parity error int ena*/
-#define NIOS_UART_IFE (1 << 1) /* frame error int ena */
-#define NIOS_UART_IBRK (1 << 2) /* break detect int ena */
-#define NIOS_UART_IROE (1 << 3) /* rx overrun int ena */
-#define NIOS_UART_ITOE (1 << 4) /* tx overrun int ena */
-#define NIOS_UART_ITMT (1 << 5) /* tx empty int ena */
-#define NIOS_UART_ITRDY (1 << 6) /* tx ready int ena */
-#define NIOS_UART_IRRDY (1 << 7) /* rx ready int ena */
-#define NIOS_UART_IE (1 << 8) /* exception int ena */
-#define NIOS_UART_TBRK (1 << 9) /* transmit break */
-#define NIOS_UART_IDCTS (1 << 10) /* cts change int ena */
-#define NIOS_UART_RTS (1 << 11) /* rts */
-#define NIOS_UART_IEOP (1 << 12) /* eop detected int ena */
-
-
-/*------------------------------------------------------------------------
- * TIMER (http://www.altera.com/literature/ds/ds_nios_timer.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_timer_t {
- unsigned status; /* Timer status reg */
- unsigned control; /* Timer control reg */
- unsigned periodl; /* Timeout period low */
- unsigned periodh; /* Timeout period high */
- unsigned snapl; /* Snapshot low */
- unsigned snaph; /* Snapshot high */
-}nios_timer_t;
-
-/* status register */
-#define NIOS_TIMER_TO (1 << 0) /* Timeout */
-#define NIOS_TIMER_RUN (1 << 1) /* Timer running */
-
-/* control register */
-#define NIOS_TIMER_ITO (1 << 0) /* Timeout int ena */
-#define NIOS_TIMER_CONT (1 << 1) /* Continuous mode */
-#define NIOS_TIMER_START (1 << 2) /* Start timer */
-#define NIOS_TIMER_STOP (1 << 3) /* Stop timer */
-
-
-/*------------------------------------------------------------------------
- * PIO (http://www.altera.com/literature/ds/ds_nios_pio.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_pio_t {
- unsigned int data; /* Data value at each PIO in/out */
- unsigned int direction; /* Data direct. for each PIO bit */
- unsigned int interruptmask; /* Per-bit IRQ enable/disable */
- unsigned int edgecapture; /* Per-bit sync. edge detect & hold */
-}nios_pio_t;
-
-/* direction register */
-#define NIOS_PIO_OUT (1) /* PIO bit is output */
-#define NIOS_PIO_IN (0) /* PIO bit is input */
-
-
-/*------------------------------------------------------------------------
- * SPI (http://www.altera.com/literature/ds/ds_nios_spi.pdf)
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_spi_t {
- unsigned rxdata; /* Rx data reg */
- unsigned txdata; /* Tx data reg */
- unsigned status; /* Status reg */
- unsigned control; /* Control reg */
- unsigned reserved; /* (master only) */
- unsigned slaveselect; /* SPI slave select mask (master only) */
-}nios_spi_t;
-
-/* status register */
-#define NIOS_SPI_ROE (1 << 3) /* rx overrun */
-#define NIOS_SPI_TOE (1 << 4) /* tx overrun */
-#define NIOS_SPI_TMT (1 << 5) /* tx empty */
-#define NIOS_SPI_TRDY (1 << 6) /* tx ready */
-#define NIOS_SPI_RRDY (1 << 7) /* rx ready */
-#define NIOS_SPI_E (1 << 8) /* exception */
-
-/* control register */
-#define NIOS_SPI_IROE (1 << 3) /* rx overrun int ena */
-#define NIOS_SPI_ITOE (1 << 4) /* tx overrun int ena */
-#define NIOS_SPI_ITRDY (1 << 6) /* tx ready int ena */
-#define NIOS_SPI_IRRDY (1 << 7) /* rx ready int ena */
-#define NIOS_SPI_IE (1 << 8) /* exception int ena */
-#define NIOS_SPI_SSO (1 << 10) /* override SS_n output */
-
-/*------------------------------------------------------------------------
- * ASMI
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_asmi_t {
- unsigned rxdata; /* Rx data reg */
- unsigned txdata; /* Tx data reg */
- unsigned status; /* Status reg */
- unsigned control; /* Control reg */
- unsigned reserved;
- unsigned slavesel; /* Slave select */
- unsigned endofpacket; /* End-of-packet reg */
-}nios_asmi_t;
-
-/* status register */
-#define NIOS_ASMI_ROE (1 << 3) /* rx overrun */
-#define NIOS_ASMI_TOE (1 << 4) /* tx overrun */
-#define NIOS_ASMI_TMT (1 << 5) /* tx empty */
-#define NIOS_ASMI_TRDY (1 << 6) /* tx ready */
-#define NIOS_ASMI_RRDY (1 << 7) /* rx ready */
-#define NIOS_ASMI_E (1 << 8) /* exception */
-#define NIOS_ASMI_EOP (1 << 9) /* eop detected */
-
-/* control register */
-#define NIOS_ASMI_IROE (1 << 3) /* rx overrun int ena */
-#define NIOS_ASMI_ITOE (1 << 4) /* tx overrun int ena */
-#define NIOS_ASMI_ITRDY (1 << 6) /* tx ready int ena */
-#define NIOS_ASMI_IRRDY (1 << 7) /* rx ready int ena */
-#define NIOS_ASMI_IE (1 << 8) /* exception int ena */
-#define NIOS_ASMI_IEOP (1 << 9) /* rx eop int ena */
-#define NIOS_ASMI_SSO (1 << 10) /* slave select enable */
-
-/*------------------------------------------------------------------------
- * JTAG UART
- *----------------------------------------------------------------------*/
-typedef volatile struct nios_jtag_t {
- unsigned short rxcntl; /* Rx data/cntl reg */
- unsigned short txcntl; /* Tx data/cntl reg */
- unsigned short errcntl; /* Err dta/cntl reg */
-}nios_jtag_t;
-
-/* status register */
-#define NIOS_JTAG_TRDY (1 << 8) /* tx ready bit */
-#define NIOS_JTAG_RRDY (1 << 8) /* rx ready bit */
-
-#endif /* __NIOSIO_H__ */
diff --git a/include/nios.h b/include/nios.h
deleted file mode 100644
index 46b685a..0000000
--- a/include/nios.h
+++ /dev/null
@@ -1,77 +0,0 @@
-/*
- * (C) Copyright 2003, Psyent Corporation <www.psyent.com>
- * Scott McNutt <smcnutt@psyent.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __NIOS_H__
-#define __NIOS_H__
-
-/*------------------------------------------------------------------------
- * Control registers -- use with wrctl() & rdctl()
- *----------------------------------------------------------------------*/
-#define CTL_STATUS 0x00 /* Processor status */
-#define CTL_ISTATUS 0x01 /* Saved status (exception) */
-#define CTL_WVALID 0x02 /* Valid window limit */
-#define CTL_ICACHE 0x05 /* I-cache line-invalidate */
-#define CTL_CPU_ID 0x06 /* CPU version id */
-#define CTL_DCACHE 0x07 /* D-cache line-invalidate */
-#define CTL_CLR_IE 0x08 /* Interrupt clear (disable) */
-#define CTL_SET_IE 0x09 /* Interrupt set (enable) */
-
-/*------------------------------------------------------------------------
- * Access to control regs
- *----------------------------------------------------------------------*/
-#define _str_(s) #s
-
-#define rdctl(reg)\
- ({unsigned int val;\
- asm volatile( "pfx " _str_(reg) "\n\t rdctl %0"\
- : "=r" (val) ); val;})
-
-#define wrctl(reg,val)\
- asm volatile( "pfx " _str_(reg) "\n\t wrctl %0 \n\t nop"\
- : : "r" (val))
-
-/*------------------------------------------------------------------------
- * Control reg bit masks
- *----------------------------------------------------------------------*/
-#define STATUS_DC (1<<17) /* Data cache enable */
-#define STATUS_IC (1<<16) /* Instruction cache enable */
-#define STATUS_IE (1<<15) /* Interrupt enable */
-#define STATUS_IPRI (0x3f<<9) /* Interrupt priority */
-#define STATUS_CWP (0x1f<<4) /* Current window pointer */
-#define STATUS_N (1<<3) /* Condition code: negative */
-#define STATUS_V (1<<2) /* Condition code: overflow */
-#define STATUS_Z (1<<1) /* Condition code: zero */
-#define STATUS_C (1<<0) /* Condition code: carry/borrow */
-
-static inline unsigned ipri( unsigned prio )
-{
- unsigned tmp;
- unsigned status = rdctl(CTL_STATUS);
- prio = (prio << 9) & STATUS_IPRI;
- tmp = (status & ~STATUS_IPRI) | prio;
- wrctl(CTL_STATUS,tmp);
- return( (status & STATUS_IPRI) >> 9);
-}
-
-
-#endif /* __NIOS_H__ */
diff --git a/include/watchdog.h b/include/watchdog.h
index ef2f5aa..b959914 100644
--- a/include/watchdog.h
+++ b/include/watchdog.h
@@ -31,10 +31,6 @@
# error "Configuration error: CONFIG_HW_WATCHDOG and CONFIG_WATCHDOG can't be used together."
#endif
-#if defined(__ASSEMBLY__) && defined(__NIOS__)
-# error "Configuration error: WATCHDOG_RESET inside assembler not supported for Nios platforms."
-#endif
-
/*
* Hardware watchdog
*/