driver: net: ldpaa: Fix Rx buffer alignment
MC 0.7.1.2 enforces limitation i.e.: "Packets may be corrupted
in several combinations of buffer size and frame offsets.
Workaround: Use buffers that are of size that is a multiple of 256, and
frame offset that is a multiple of 256"
Updating the DPNI Eth driver to comply with the restriction.
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.c b/drivers/net/ldpaa_eth/ldpaa_eth.c
index 5ddc9fe..69530b1 100644
--- a/drivers/net/ldpaa_eth/ldpaa_eth.c
+++ b/drivers/net/ldpaa_eth/ldpaa_eth.c
@@ -500,7 +500,7 @@
struct qbman_release_desc rd;
for (i = 0; i < 7; i++) {
- addr = memalign(L1_CACHE_BYTES, LDPAA_ETH_RX_BUFFER_SIZE);
+ addr = memalign(LDPAA_ETH_BUF_ALIGN, LDPAA_ETH_RX_BUFFER_SIZE);
if (!addr) {
printf("addr allocation failed\n");
goto err_alloc;
@@ -685,10 +685,13 @@
/* Configure our buffers' layout */
dflt_dpni->buf_layout.options = DPNI_BUF_LAYOUT_OPT_PARSER_RESULT |
DPNI_BUF_LAYOUT_OPT_FRAME_STATUS |
- DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE;
+ DPNI_BUF_LAYOUT_OPT_PRIVATE_DATA_SIZE |
+ DPNI_BUF_LAYOUT_OPT_DATA_ALIGN;
dflt_dpni->buf_layout.pass_parser_result = true;
dflt_dpni->buf_layout.pass_frame_status = true;
dflt_dpni->buf_layout.private_data_size = LDPAA_ETH_SWA_SIZE;
+ /* HW erratum mandates data alignment in multiples of 256 */
+ dflt_dpni->buf_layout.data_align = LDPAA_ETH_BUF_ALIGN;
/* ...rx, ... */
err = dpni_set_rx_buffer_layout(dflt_mc_io, MC_CMD_NO_FLAGS,
dflt_dpni->dpni_handle,
@@ -699,7 +702,9 @@
}
/* ... tx, ... */
- dflt_dpni->buf_layout.options &= ~DPNI_BUF_LAYOUT_OPT_PARSER_RESULT;
+ /* remove Rx-only options */
+ dflt_dpni->buf_layout.options &= ~(DPNI_BUF_LAYOUT_OPT_DATA_ALIGN |
+ DPNI_BUF_LAYOUT_OPT_PARSER_RESULT);
err = dpni_set_tx_buffer_layout(dflt_mc_io, MC_CMD_NO_FLAGS,
dflt_dpni->dpni_handle,
&dflt_dpni->buf_layout);
diff --git a/drivers/net/ldpaa_eth/ldpaa_eth.h b/drivers/net/ldpaa_eth/ldpaa_eth.h
index b86a695..af41b27 100644
--- a/drivers/net/ldpaa_eth/ldpaa_eth.h
+++ b/drivers/net/ldpaa_eth/ldpaa_eth.h
@@ -28,10 +28,10 @@
#define LDPAA_ETH_REFILL_THRESH (LDPAA_ETH_NUM_BUFS/2)
#define LDPAA_ETH_RX_BUFFER_SIZE 2048
-/* Hardware requires alignment for ingress/egress buffer addresses
- * and ingress buffer lengths.
+/* Hardware requires alignment for buffer address and length: 256-byte
+ * for ingress, 64-byte for egress. Using 256 for both.
*/
-#define LDPAA_ETH_BUF_ALIGN 64
+#define LDPAA_ETH_BUF_ALIGN 256
/* So far we're only accomodating a skb backpointer in the frame's
* software annotation, but the hardware options are either 0 or 64.