tqma6: fix sf detection
Commit 155fa9af95ac5be857a7327e7a968a296e60d4c8 changed the way
to define a GPIO line, which can be used to force CS high
across multiple transactions. In order to fix sf detection
change board code to make use of board_spi_cs_gpio(..).
Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
diff --git a/board/tqc/tqma6/tqma6.c b/board/tqc/tqma6/tqma6.c
index b552bb8..fd1bd59 100644
--- a/board/tqc/tqma6/tqma6.c
+++ b/board/tqc/tqma6/tqma6.c
@@ -138,8 +138,10 @@
NEW_PAD_CTRL(MX6_PAD_EIM_D18__ECSPI1_MOSI, SPI_PAD_CTRL),
};
+#define TQMA6_SF_CS_GPIO IMX_GPIO_NR(3, 19)
+
static unsigned const tqma6_ecspi1_cs[] = {
- IMX_GPIO_NR(3, 19),
+ TQMA6_SF_CS_GPIO,
};
static void tqma6_iomuxc_spi(void)
@@ -152,6 +154,12 @@
ARRAY_SIZE(tqma6_ecspi1_pads));
}
+int board_spi_cs_gpio(unsigned bus, unsigned cs)
+{
+ return ((bus == CONFIG_SF_DEFAULT_BUS) &&
+ (cs == CONFIG_SF_DEFAULT_CS)) ? TQMA6_SF_CS_GPIO : -1;
+}
+
static struct i2c_pads_info tqma6_i2c3_pads = {
/* I2C3: on board LM75, M24C64, */
.scl = {
diff --git a/include/configs/tqma6.h b/include/configs/tqma6.h
index 2705d2c..9ba0155 100644
--- a/include/configs/tqma6.h
+++ b/include/configs/tqma6.h
@@ -9,13 +9,26 @@
#ifndef __CONFIG_H
#define __CONFIG_H
+#define CONFIG_MX6
+
+/* SPL */
+/* #if defined(CONFIG_SPL_BUILD) */
+
+#define CONFIG_SPL_MMC_SUPPORT
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_FAT_SUPPORT
+#define CONFIG_SPL_EXT_SUPPORT
+
+/* common IMX6 SPL configuration */
+#include "imx6_spl.h"
+
+/* #endif */
+
#include "mx6_common.h"
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>
#include <linux/sizes.h>
-#define CONFIG_MX6
-
#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
#define PHYS_SDRAM_SIZE (512u * SZ_1M)
#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
@@ -57,7 +70,7 @@
#define CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_BUS 0
-#define CONFIG_SF_DEFAULT_CS (0 | (IMX_GPIO_NR(3, 19) << 8))
+#define CONFIG_SF_DEFAULT_CS 0
#define CONFIG_SF_DEFAULT_SPEED 50000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)