avr32: use board_early_init_r instead of board_init_info
Replace the avr32-specific board_init_info hook by the standard
board_early_init_r hook and make it optional.
board_early_init_r() runs somewhat earlier than board_init_info used to
do, but this isn't a problem for any of the in-tree boards.
Signed-off-by: Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c
index 03544aa..480d525 100644
--- a/board/atmel/atngw100/atngw100.c
+++ b/board/atmel/atngw100/atngw100.c
@@ -88,10 +88,11 @@
return actual_size;
}
-void board_init_info(void)
+int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
gd->bd->bi_phy_id[1] = 0x03;
+ return 0;
}
extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c
index cc400a9..7be3993 100644
--- a/board/atmel/atstk1000/atstk1000.c
+++ b/board/atmel/atstk1000/atstk1000.c
@@ -110,10 +110,11 @@
return actual_size;
}
-void board_init_info(void)
+int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x10;
gd->bd->bi_phy_id[1] = 0x11;
+ return 0;
}
extern int macb_eth_initialize(int id, void *regs, unsigned int phy_addr);
diff --git a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
index b2ddd08..d53ca4c 100644
--- a/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
+++ b/board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
@@ -81,9 +81,10 @@
return actual_size;
}
-void board_init_info(void)
+int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
+ return 0;
}
#if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)
diff --git a/board/mimc/mimc200/mimc200.c b/board/mimc/mimc200/mimc200.c
index 4da4678..c30bcb6 100644
--- a/board/mimc/mimc200/mimc200.c
+++ b/board/mimc/mimc200/mimc200.c
@@ -124,10 +124,11 @@
return actual_size;
}
-void board_init_info(void)
+int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
gd->bd->bi_phy_id[1] = 0x03;
+ return 0;
}
/* SPI chip select control */
diff --git a/board/miromico/hammerhead/hammerhead.c b/board/miromico/hammerhead/hammerhead.c
index 8670527..7fd0781 100644
--- a/board/miromico/hammerhead/hammerhead.c
+++ b/board/miromico/hammerhead/hammerhead.c
@@ -95,9 +95,10 @@
return actual_size;
}
-void board_init_info(void)
+int board_early_init_r(void)
{
gd->bd->bi_phy_id[0] = 0x01;
+ return 0;
}
int board_postclk_init(void)
diff --git a/include/asm-avr32/initcalls.h b/include/asm-avr32/initcalls.h
index 583e5dc..57a278b 100644
--- a/include/asm-avr32/initcalls.h
+++ b/include/asm-avr32/initcalls.h
@@ -26,6 +26,5 @@
extern int cpu_init(void);
extern int timer_init(void);
-extern void board_init_info(void);
#endif /* __ASM_AVR32_INITCALLS_H__ */
diff --git a/lib_avr32/board.c b/lib_avr32/board.c
index 19d76d2..4ed6c96 100644
--- a/lib_avr32/board.c
+++ b/lib_avr32/board.c
@@ -53,6 +53,7 @@
return 0;
}
int board_postclk_init(void) __attribute__((weak, alias("__do_nothing")));
+int board_early_init_r(void) __attribute__((weak, alias("__do_nothing")));
/* The malloc area is right below the monitor image in RAM */
static void mem_malloc_init(void)
@@ -282,6 +283,8 @@
gd->flags |= GD_FLG_RELOC;
gd->reloc_off = dest_addr - CFG_MONITOR_BASE;
+ board_early_init_r();
+
monitor_flash_len = _edata - _text;
/*
@@ -318,7 +321,6 @@
mem_malloc_init();
malloc_bin_reloc();
dma_alloc_init();
- board_init_info();
enable_interrupts();