* Patch by Nicolas Lacressonniere, 11 Jun 2003:
Modifications for Atmel AT91RM9200DK ARM920T based development kit
- Add Atmel DataFlash support for reading and writing.
- Add possibility to boot a Linux from DataFlash with BOOTM command.
- Add Flash detection on Atmel AT91RM9200DK
(between Atmel AT49BV1614 and AT49BV1614A flashes)
- Replace old Ethernet PHY layer functions
- Change link address
* Patch by Frank Smith, 9 Jun 2003:
use CRIT_EXCEPTION for machine check on 4xx
* Patch by Detlev Zundel, 13 Jun 2003:
added implementation of the "carinfo" command in cmd_immap.c
diff --git a/CHANGELOG b/CHANGELOG
index 0cecad3..8cc4113 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,21 @@
Changes since U-Boot 0.3.1:
======================================================================
+* Patch by Nicolas Lacressonniere, 11 Jun 2003:
+ Modifications for Atmel AT91RM9200DK ARM920T based development kit
+ - Add Atmel DataFlash support for reading and writing.
+ - Add possibility to boot a Linux from DataFlash with BOOTM command.
+ - Add Flash detection on Atmel AT91RM9200DK
+ (between Atmel AT49BV1614 and AT49BV1614A flashes)
+ - Replace old Ethernet PHY layer functions
+ - Change link address
+
+* Patch by Frank Smith, 9 Jun 2003:
+ use CRIT_EXCEPTION for machine check on 4xx
+
+* Patch by Detlev Zundel, 13 Jun 2003:
+ added implementation of the "carinfo" command in cmd_immap.c
+
* Fix CONFIG_NET_MULTI support in include/net.h
* Patches by Kyle Harris, 13 Mar 2003:
diff --git a/README b/README
index 135f022..453ef7a 100644
--- a/README
+++ b/README
@@ -151,6 +151,7 @@
- board/RPXClassic
Files specific to RPXClassic boards
- board/RPXlite Files specific to RPXlite boards
+- board/at91rm9200dk Files specific to AT91RM9200DK boards
- board/c2mon Files specific to c2mon boards
- board/cmi Files specific to cmi boards
- board/cogent Files specific to Cogent boards
@@ -352,7 +353,7 @@
CONFIG_HHP_CRADLE, CONFIG_DNP1110, CONFIG_EP7312,
CONFIG_IMPA7, CONFIG_LART, CONFIG_LUBBOCK,
CONFIG_SHANNON, CONFIG_SMDK2400, CONFIG_SMDK2410,
- CONFIG_TRAB
+ CONFIG_TRAB, CONFIG_AT91RM9200DK
- CPU Module Type: (if CONFIG_COGENT is defined)
@@ -1248,6 +1249,13 @@
the environment like the autoscript function or the
boot command first.
+- DataFlash Support
+ CONFIG_HAS_DATAFLASH
+
+ Defining this option enables DataFlash features and
+ allows to read/write in Dataflash via the standard
+ commands cp, md...
+
- Show boot progress
CONFIG_SHOW_BOOT_PROGRESS
@@ -1801,6 +1809,7 @@
GENIETV_config TQM823L_config PIP405_config
GEN860T_config EBONY_config FPS860L_config
ELPT860_config cmi_mpc5xx_config NETVIA_config
+ at91rm9200dk_config
Note: for some board special configuration names may exist; check if
additional information is available from the board vendor; for
diff --git a/board/at91rm9200dk/at91rm9200dk.c b/board/at91rm9200dk/at91rm9200dk.c
index 07def18..ffd9687 100644
--- a/board/at91rm9200dk/at91rm9200dk.c
+++ b/board/at91rm9200dk/at91rm9200dk.c
@@ -30,28 +30,35 @@
* Miscelaneous platform dependent initialisations
*/
-int board_init(void)
- {
- DECLARE_GLOBAL_DATA_PTR;
+int board_init (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
- /* memory and cpu-speed are setup before relocation */
- /* so we do _nothing_ here */
+ /* Enable Ctrlc */
+ console_init_f ();
- /* arch number of AT91RM9200DK-Board */
- gd->bd->bi_arch_number = 251;
- /* adress of boot parameters */
- gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+ /* Correct IRDA resistor problem */
+ /* Set PA23_TXD in Output */
+ (AT91PS_PIO) AT91C_BASE_PIOA->PIO_OER = AT91C_PA23_TXD2;
- return 0;
+ /* memory and cpu-speed are setup before relocation */
+ /* so we do _nothing_ here */
+
+ /* arch number of AT91RM9200DK-Board */
+ gd->bd->bi_arch_number = 251;
+ /* adress of boot parameters */
+ gd->bd->bi_boot_params = PHYS_SDRAM + 0x100;
+
+ return 0;
}
-int dram_init(void)
+int dram_init (void)
{
- DECLARE_GLOBAL_DATA_PTR;
+ DECLARE_GLOBAL_DATA_PTR;
- gd->bd->bi_dram[0].start = PHYS_SDRAM;
- gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
- return 0;
+ gd->bd->bi_dram[0].start = PHYS_SDRAM;
+ gd->bd->bi_dram[0].size = PHYS_SDRAM_SIZE;
+ return 0;
}
/*
@@ -59,47 +66,47 @@
* The NAND lives in the CS2* space
*/
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-extern void
-nand_probe(ulong physadr);
+extern void nand_probe (ulong physadr);
-#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
-void
-nand_init(void)
+#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
+void nand_init (void)
{
/* Setup Smart Media, fitst enable the address range of CS3 */
- *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
- /* set the bus interface characteristics based on
- tDS Data Set up Time 30 - ns
- tDH Data Hold Time 20 - ns
- tALS ALE Set up Time 20 - ns
- 16ns at 60 MHz ~= 3 */
+ *AT91C_EBI_CSA |= AT91C_EBI_CS3A_SMC_SmartMedia;
+ /* set the bus interface characteristics based on
+ tDS Data Set up Time 30 - ns
+ tDH Data Hold Time 20 - ns
+ tALS ALE Set up Time 20 - ns
+ 16ns at 60 MHz ~= 3 */
/*memory mapping structures */
#define SM_ID_RWH (5 << 28)
#define SM_RWH (1 << 28)
#define SM_RWS (0 << 24)
#define SM_TDF (1 << 8)
#define SM_NWS (3)
- AT91C_BASE_SMC2->SMC2_CSR[3] = ( SM_RWH|SM_RWS | AT91C_SMC2_ACSS_STANDARD |
- AT91C_SMC2_DBW_8 | SM_TDF |
- AT91C_SMC2_WSEN | SM_NWS);
+ AT91C_BASE_SMC2->SMC2_CSR[3] = (SM_RWH | SM_RWS |
+ AT91C_SMC2_ACSS_STANDARD | AT91C_SMC2_DBW_8 |
+ SM_TDF | AT91C_SMC2_WSEN | SM_NWS);
- /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
- *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE;
- *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE | AT91C_PC3_BFBAA_SMWE;
+ /* enable the SMOE line PC0=SMCE, A21=CLE, A22=ALE */
+ *AT91C_PIOC_ASR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+ AT91C_PC3_BFBAA_SMWE;
+ *AT91C_PIOC_PDR = AT91C_PC0_BFCK | AT91C_PC1_BFRDY_SMOE |
+ AT91C_PC3_BFBAA_SMWE;
/* Configure PC2 as input (signal READY of the SmartMedia) */
- *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */
- *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */
+ *AT91C_PIOC_PER = AT91C_PC2_BFAVD; /* enable direct output enable */
+ *AT91C_PIOC_ODR = AT91C_PC2_BFAVD; /* disable output */
/* Configure PB1 as input (signal Card Detect of the SmartMedia) */
- *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */
- *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */
+ *AT91C_PIOB_PER = AT91C_PIO_PB1; /* enable direct output enable */
+ *AT91C_PIOB_ODR = AT91C_PIO_PB1; /* disable output */
- if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
- printf ("No ");
- printf ("SmartMedia card inserted\n");
+ if (*AT91C_PIOB_PDSR & AT91C_PIO_PB1)
+ printf ("No ");
+ printf ("SmartMedia card inserted\n");
- printf("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
- nand_probe(AT91_SMARTMEDIA_BASE);
+ printf ("Probing at 0x%.8x\n", AT91_SMARTMEDIA_BASE);
+ nand_probe (AT91_SMARTMEDIA_BASE);
}
#endif
diff --git a/board/at91rm9200dk/config.mk b/board/at91rm9200dk/config.mk
index a682451..009b4d7 100644
--- a/board/at91rm9200dk/config.mk
+++ b/board/at91rm9200dk/config.mk
@@ -1,2 +1,2 @@
-TEXT_BASE = 0x21fa0000
+TEXT_BASE = 0x21f00000
diff --git a/board/at91rm9200dk/flash.c b/board/at91rm9200dk/flash.c
index 6497f11..4d4524f 100644
--- a/board/at91rm9200dk/flash.c
+++ b/board/at91rm9200dk/flash.c
@@ -31,11 +31,40 @@
ulong myflush(void);
+/* Flash Organization Structure */
+typedef struct OrgDef
+{
+ unsigned int sector_number;
+ unsigned int sector_size;
+} OrgDef;
+
+
+/* Flash Organizations */
+OrgDef OrgAT49BV16x4[] =
+{
+ { 8, 8*1024 }, /* 8 * 8kBytes sectors */
+ { 2, 32*1024 }, /* 2 * 32kBytes sectors */
+ { 30, 64*1024 } /* 30 * 64kBytes sectors */
+};
+
+OrgDef OrgAT49BV16x4A[] =
+{
+ { 8, 8*1024 }, /* 8 * 8kBytes sectors */
+ { 31, 64*1024 } /* 31 * 64kBytes sectors */
+};
+
+
#define FLASH_BANK_SIZE 0x200000 /* 2 MB */
#define MAIN_SECT_SIZE 0x10000 /* 64 KB */
flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
+/* AT49BV1614A Codes */
+#define FLASH_CODE1 0xAA
+#define FLASH_CODE2 0x55
+#define ID_IN_CODE 0x90
+#define ID_OUT_CODE 0xF0
+
#define CMD_READ_ARRAY 0x00F0
#define CMD_UNLOCK1 0x00AA
@@ -48,6 +77,9 @@
#define MEM_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00005555<<1)))
#define MEM_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x00002AAA<<1)))
+#define IDENT_FLASH_ADDR1 (*(volatile u16 *)(CFG_FLASH_BASE + (0x0000555<<1)))
+#define IDENT_FLASH_ADDR2 (*(volatile u16 *)(CFG_FLASH_BASE + (0x0000AAA<<1)))
+
#define BIT_ERASE_DONE 0x0080
#define BIT_RDY_MASK 0x0080
#define BIT_PROGRAM_ERROR 0x0020
@@ -59,339 +91,375 @@
/*-----------------------------------------------------------------------
*/
-
-ulong flash_init(void)
+void flash_identification (flash_info_t * info)
{
- int i, j;
- ulong size = 0;
+ volatile u16 manuf_code, device_code, add_device_code;
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
- {
- ulong flashbase = 0;
- flash_info[i].flash_id =
- (ATM_MANUFACT & FLASH_VENDMASK) |
- (ATM_ID_BV1614 & FLASH_TYPEMASK);
- flash_info[i].size = FLASH_BANK_SIZE;
- flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
- memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
- if (i == 0)
- flashbase = PHYS_FLASH_1;
- else
- panic("configured to many flash banks!\n");
- for (j = 0; j < flash_info[i].sector_count; j++)
- {
+ IDENT_FLASH_ADDR1 = FLASH_CODE1;
+ IDENT_FLASH_ADDR2 = FLASH_CODE2;
+ IDENT_FLASH_ADDR1 = ID_IN_CODE;
- if (j <= 9)
- {
- /* 1st to 8th are 8 KB */
- if (j <= 7)
- {
- flash_info[i].start[j] = flashbase + j*0x2000;
+ manuf_code = *(volatile u16 *) CFG_FLASH_BASE;
+ device_code = *(volatile u16 *) (CFG_FLASH_BASE + 2);
+ add_device_code = *(volatile u16 *) (CFG_FLASH_BASE + (3 << 1));
+
+ IDENT_FLASH_ADDR1 = FLASH_CODE1;
+ IDENT_FLASH_ADDR2 = FLASH_CODE2;
+ IDENT_FLASH_ADDR1 = ID_OUT_CODE;
+
+ /* Vendor type */
+ info->flash_id = ATM_MANUFACT & FLASH_VENDMASK;
+ printf ("Atmel: ");
+
+ if ((device_code & FLASH_TYPEMASK) == (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
+
+ if ((add_device_code & FLASH_TYPEMASK) ==
+ (ATM_ID_BV1614A & FLASH_TYPEMASK)) {
+ info->flash_id |= ATM_ID_BV1614A & FLASH_TYPEMASK;
+ printf ("AT49BV1614A (16Mbit)\n");
}
- /* 9th and 10th are both 32 KB */
- if ((j == 8) || (j == 9))
- {
- flash_info[i].start[j] = flashbase + 0x10000 + (j-8)*0x8000;
- }
- }
- else
- {
- flash_info[i].start[j] = flashbase + (j-8)*MAIN_SECT_SIZE;
- }
+ } else { /* AT49BV1614 Flash */
+ info->flash_id |= ATM_ID_BV1614 & FLASH_TYPEMASK;
+ printf ("AT49BV1614 (16Mbit)\n");
}
- size += flash_info[i].size;
- }
+}
- flash_protect(FLAG_PROTECT_SET,
- CFG_FLASH_BASE,
- CFG_ENV_ADDR - 1,
- &flash_info[0]);
- flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
- &flash_info[0]);
+ulong flash_init (void)
+{
+ int i, j, k;
+ unsigned int flash_nb_blocks, sector;
+ unsigned int start_address;
+ OrgDef *pOrgDef;
- return size;
+ ulong size = 0;
+
+ for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+ ulong flashbase = 0;
+
+ flash_identification (&flash_info[i]);
+
+ flash_info[i].size = FLASH_BANK_SIZE;
+
+ if ((flash_info[i].flash_id & FLASH_TYPEMASK) ==
+ (ATM_ID_BV1614 & FLASH_TYPEMASK)) {
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+
+ pOrgDef = OrgAT49BV16x4;
+ flash_nb_blocks = sizeof (OrgAT49BV16x4) / sizeof (OrgDef);
+ } else { /* AT49BV1614A Flash */
+ flash_info[i].sector_count = CFG_MAX_FLASH_SECT - 1;
+ memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT - 1);
+
+ pOrgDef = OrgAT49BV16x4A;
+ flash_nb_blocks = sizeof (OrgAT49BV16x4A) / sizeof (OrgDef);
+ }
+
+ if (i == 0)
+ flashbase = PHYS_FLASH_1;
+ else
+ panic ("configured to many flash banks!\n");
+
+ sector = 0;
+ start_address = flashbase;
+
+ for (j = 0; j < flash_nb_blocks; j++) {
+ for (k = 0; k < pOrgDef[j].sector_number; k++) {
+ flash_info[i].start[sector++] = start_address;
+ start_address += pOrgDef[j].sector_size;
+ }
+ }
+
+ size += flash_info[i].size;
+ }
+
+ /* Protect binary boot image */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_FLASH_BASE,
+ CFG_FLASH_BASE + CFG_BOOT_SIZE - 1, &flash_info[0]);
+
+ /* Protect environment variables */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_ENV_ADDR,
+ CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
+
+ /* Protect U-Boot gzipped image */
+ flash_protect (FLAG_PROTECT_SET,
+ CFG_U_BOOT_BASE,
+ CFG_U_BOOT_BASE + CFG_U_BOOT_SIZE - 1, &flash_info[0]);
+
+ return size;
}
/*-----------------------------------------------------------------------
*/
-void flash_print_info (flash_info_t *info)
+void flash_print_info (flash_info_t * info)
{
- int i;
+ int i;
- switch (info->flash_id & FLASH_VENDMASK)
- {
- case (ATM_MANUFACT & FLASH_VENDMASK):
- printf("Atmel: ");
- break;
- default:
- printf("Unknown Vendor ");
- break;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK)
- {
- case (ATM_ID_BV1614 & FLASH_TYPEMASK):
- printf("AT49BV1614 (16Mbit)\n");
- break;
- default:
- printf("Unknown Chip Type\n");
- goto Done;
- break;
- }
-
- printf(" Size: %ld MB in %d Sectors\n",
- info->size >> 20, info->sector_count);
-
- printf(" Sector Start Addresses:");
- for (i = 0; i < info->sector_count; i++)
- {
- if ((i % 5) == 0)
- {
- printf ("\n ");
+ switch (info->flash_id & FLASH_VENDMASK) {
+ case (ATM_MANUFACT & FLASH_VENDMASK):
+ printf ("Atmel: ");
+ break;
+ default:
+ printf ("Unknown Vendor ");
+ break;
}
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
- printf ("\n");
-Done:
+ switch (info->flash_id & FLASH_TYPEMASK) {
+ case (ATM_ID_BV1614 & FLASH_TYPEMASK):
+ printf ("AT49BV1614 (16Mbit)\n");
+ break;
+ case (ATM_ID_BV1614A & FLASH_TYPEMASK):
+ printf ("AT49BV1614A (16Mbit)\n");
+ break;
+ default:
+ printf ("Unknown Chip Type\n");
+ goto Done;
+ break;
+ }
+
+ printf (" Size: %ld MB in %d Sectors\n",
+ info->size >> 20, info->sector_count);
+
+ printf (" Sector Start Addresses:");
+ for (i = 0; i < info->sector_count; i++) {
+ if ((i % 5) == 0) {
+ printf ("\n ");
+ }
+ printf (" %08lX%s", info->start[i],
+ info->protect[i] ? " (RO)" : " ");
+ }
+ printf ("\n");
+
+ Done:
}
/*-----------------------------------------------------------------------
*/
-int flash_erase (flash_info_t *info, int s_first, int s_last)
+int flash_erase (flash_info_t * info, int s_first, int s_last)
{
- ulong result;
- int iflag, cflag, prot, sect;
- int rc = ERR_OK;
- int chip1;
+ ulong result;
+ int iflag, cflag, prot, sect;
+ int rc = ERR_OK;
+ int chip1;
- /* first look for protection bits */
+ /* first look for protection bits */
- if (info->flash_id == FLASH_UNKNOWN)
- return ERR_UNKNOWN_FLASH_TYPE;
+ if (info->flash_id == FLASH_UNKNOWN)
+ return ERR_UNKNOWN_FLASH_TYPE;
- if ((s_first < 0) || (s_first > s_last)) {
- return ERR_INVAL;
- }
-
- if ((info->flash_id & FLASH_VENDMASK) !=
- (ATM_MANUFACT & FLASH_VENDMASK)) {
- return ERR_UNKNOWN_FLASH_VENDOR;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
+ if ((s_first < 0) || (s_first > s_last)) {
+ return ERR_INVAL;
}
- }
- if (prot)
- return ERR_PROTECTED;
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status();
- icache_disable();
- iflag = disable_interrupts();
+ if ((info->flash_id & FLASH_VENDMASK) !=
+ (ATM_MANUFACT & FLASH_VENDMASK)) {
+ return ERR_UNKNOWN_FLASH_VENDOR;
+ }
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && !ctrlc(); sect++)
- {
- printf("Erasing sector %2d ... ", sect);
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- if (info->protect[sect] == 0)
- { /* not protected */
- volatile u16 *addr = (volatile u16 *)(info->start[sect]);
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- *addr = CMD_ERASE_CONFIRM;
-
- /* wait until flash is ready */
- chip1 = 0;
-
- do
- {
- result = *addr;
-
- /* check timeout */
- if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
- {
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
- chip1 = TMO;
- break;
+ prot = 0;
+ for (sect = s_first; sect <= s_last; ++sect) {
+ if (info->protect[sect]) {
+ prot++;
}
-
- if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
- chip1 = READY;
-
- } while (!chip1);
-
- MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
- if (chip1 == ERR)
- {
- rc = ERR_PROG_ERROR;
- goto outahere;
- }
- if (chip1 == TMO)
- {
- rc = ERR_TIMOUT;
- goto outahere;
- }
-
- printf("ok.\n");
}
- else /* it was protected */
- {
- printf("protected!\n");
- }
- }
+ if (prot)
+ return ERR_PROTECTED;
- if (ctrlc())
- printf("User Interrupt!\n");
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ cflag = icache_status ();
+ icache_disable ();
+ iflag = disable_interrupts ();
+
+ /* Start erase on unprotected sectors */
+ for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+ printf ("Erasing sector %2d ... ", sect);
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
+
+ if (info->protect[sect] == 0) { /* not protected */
+ volatile u16 *addr = (volatile u16 *) (info->start[sect]);
+
+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+ MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
+
+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+ *addr = CMD_ERASE_CONFIRM;
+
+ /* wait until flash is ready */
+ chip1 = 0;
+
+ do {
+ result = *addr;
+
+ /* check timeout */
+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+ chip1 = TMO;
+ break;
+ }
+
+ if (!chip1 && (result & 0xFFFF) & BIT_ERASE_DONE)
+ chip1 = READY;
+
+ } while (!chip1);
+
+ MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
+
+ if (chip1 == ERR) {
+ rc = ERR_PROG_ERROR;
+ goto outahere;
+ }
+ if (chip1 == TMO) {
+ rc = ERR_TIMOUT;
+ goto outahere;
+ }
+
+ printf ("ok.\n");
+ } else { /* it was protected */
+ printf ("protected!\n");
+ }
+ }
+
+ if (ctrlc ())
+ printf ("User Interrupt!\n");
outahere:
- /* allow flash to settle - wait 10 ms */
- udelay_masked(10000);
+ /* allow flash to settle - wait 10 ms */
+ udelay_masked (10000);
- if (iflag)
- enable_interrupts();
+ if (iflag)
+ enable_interrupts ();
- if (cflag)
- icache_enable();
+ if (cflag)
+ icache_enable ();
- return rc;
+ return rc;
}
/*-----------------------------------------------------------------------
* Copy memory to flash
*/
-volatile static int write_word (flash_info_t *info, ulong dest, ulong data)
+volatile static int write_word (flash_info_t * info, ulong dest,
+ ulong data)
{
- volatile u16 *addr = (volatile u16 *)dest;
- ulong result;
- int rc = ERR_OK;
- int cflag, iflag;
- int chip1;
+ volatile u16 *addr = (volatile u16 *) dest;
+ ulong result;
+ int rc = ERR_OK;
+ int cflag, iflag;
+ int chip1;
- /*
- * Check if Flash is (sufficiently) erased
- */
- result = *addr;
- if ((result & data) != data)
- return ERR_NOT_ERASED;
-
-
- /*
- * Disable interrupts which might cause a timeout
- * here. Remember that our exception vectors are
- * at address 0 in the flash, and we don't want a
- * (ticker) exception to happen while the flash
- * chip is in programming mode.
- */
- cflag = icache_status();
- icache_disable();
- iflag = disable_interrupts();
-
- MEM_FLASH_ADDR1 = CMD_UNLOCK1;
- MEM_FLASH_ADDR2 = CMD_UNLOCK2;
- MEM_FLASH_ADDR1 = CMD_PROGRAM;
- *addr = data;
-
- /* arm simple, non interrupt dependent timer */
- reset_timer_masked();
-
- /* wait until flash is ready */
- chip1 = 0;
- do
- {
+ /*
+ * Check if Flash is (sufficiently) erased
+ */
result = *addr;
+ if ((result & data) != data)
+ return ERR_NOT_ERASED;
- /* check timeout */
- if (get_timer_masked() > CFG_FLASH_ERASE_TOUT)
- {
- chip1 = ERR | TMO;
- break;
- }
- if (!chip1 && ((result & 0x80) == (data & 0x80)))
- chip1 = READY;
- } while (!chip1);
+ /*
+ * Disable interrupts which might cause a timeout
+ * here. Remember that our exception vectors are
+ * at address 0 in the flash, and we don't want a
+ * (ticker) exception to happen while the flash
+ * chip is in programming mode.
+ */
+ cflag = icache_status ();
+ icache_disable ();
+ iflag = disable_interrupts ();
- *addr = CMD_READ_ARRAY;
+ MEM_FLASH_ADDR1 = CMD_UNLOCK1;
+ MEM_FLASH_ADDR2 = CMD_UNLOCK2;
+ MEM_FLASH_ADDR1 = CMD_PROGRAM;
+ *addr = data;
- if (chip1 == ERR || *addr != data)
- rc = ERR_PROG_ERROR;
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked ();
- if (iflag)
- enable_interrupts();
+ /* wait until flash is ready */
+ chip1 = 0;
+ do {
+ result = *addr;
- if (cflag)
- icache_enable();
+ /* check timeout */
+ if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+ chip1 = ERR | TMO;
+ break;
+ }
+ if (!chip1 && ((result & 0x80) == (data & 0x80)))
+ chip1 = READY;
- return rc;
+ } while (!chip1);
+
+ *addr = CMD_READ_ARRAY;
+
+ if (chip1 == ERR || *addr != data)
+ rc = ERR_PROG_ERROR;
+
+ if (iflag)
+ enable_interrupts ();
+
+ if (cflag)
+ icache_enable ();
+
+ return rc;
}
/*-----------------------------------------------------------------------
* Copy memory to flash.
*/
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
{
- ulong wp, data;
- int rc;
+ ulong wp, data;
+ int rc;
- if(addr & 1) {
- printf("unaligned destination not supported\n");
- return ERR_ALIGN;
- };
+ if (addr & 1) {
+ printf ("unaligned destination not supported\n");
+ return ERR_ALIGN;
+ };
- if((int)src & 1) {
- printf("unaligned source not supported\n");
- return ERR_ALIGN;
- };
+ if ((int) src & 1) {
+ printf ("unaligned source not supported\n");
+ return ERR_ALIGN;
+ };
- wp = addr;
+ wp = addr;
- while (cnt >= 2) {
- data = *((volatile u16*)src);
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
+ while (cnt >= 2) {
+ data = *((volatile u16 *) src);
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ src += 2;
+ wp += 2;
+ cnt -= 2;
}
- src += 2;
- wp += 2;
- cnt -= 2;
- }
- if(cnt == 1) {
- data = (*((volatile u8*)src)) | (*((volatile u8*)(wp+1)) << 8);
- if ((rc = write_word(info, wp, data)) != 0) {
- return (rc);
- }
- src += 1;
- wp += 1;
- cnt -= 1;
- };
+ if (cnt == 1) {
+ data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) <<
+ 8);
+ if ((rc = write_word (info, wp, data)) != 0) {
+ return (rc);
+ }
+ src += 1;
+ wp += 1;
+ cnt -= 1;
+ };
- return ERR_OK;
+ return ERR_OK;
}
diff --git a/board/kup4k/kup4k.c b/board/kup4k/kup4k.c
index b3ede17..7981df3 100644
--- a/board/kup4k/kup4k.c
+++ b/board/kup4k/kup4k.c
@@ -299,12 +299,6 @@
void lcd_logo (bd_t * bd)
{
-
-
- volatile immap_t *immap = (immap_t *) CFG_IMMR;
-
-
-
FB_INFO_S1D13xxx fb_info;
S1D_INDEX s1dReg;
S1D_VALUE s1dValue;
@@ -328,8 +322,8 @@
/**/
/*----------------------------------------------------------------------------- */
memctl = &immr->im_memctl;
-/* memctl->memc_or5 = 0xFFC007F0; / * 4 MB 17 WS or externel TA */
-/* memctl->memc_br5 = 0x80000801; / * Start at 0x80000000 */
+/* memctl->memc_or5 = 0xFFC007F0; / * 4 MB 17 WS or externel TA */
+/* memctl->memc_br5 = 0x80000801; / * Start at 0x80000000 */
memctl->memc_or5 = 0xFFC00708; /* 4 MB 17 WS or externel TA */
memctl->memc_br5 = 0x80080801; /* Start at 0x80080000 */
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index af62bec..8af7c7c 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -56,6 +56,10 @@
#include <logbuff.h>
#endif
+#ifdef CONFIG_HAS_DATAFLASH
+#include <dataflash.h>
+#endif
+
/*
* Some systems (for example LWMON) have very short watchdog periods;
* we must make sure to split long operations like memmove() or
@@ -138,6 +142,11 @@
printf ("## Booting image at %08lx ...\n", addr);
/* Copy header so we can blank CRC field for re-calculation */
+#ifdef CONFIG_HAS_DATAFLASH
+ if (addr_dataflash(addr)){
+ read_dataflash(addr, sizeof(image_header_t), (char *)&header);
+ } else
+#endif
memmove (&header, (char *)addr, sizeof(image_header_t));
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
@@ -178,6 +187,13 @@
data = addr + sizeof(image_header_t);
len = ntohl(hdr->ih_size);
+#ifdef CONFIG_HAS_DATAFLASH
+ if (addr_dataflash(addr)){
+ read_dataflash(data, len, (char *)CFG_LOAD_ADDR);
+ data = CFG_LOAD_ADDR;
+ }
+#endif
+
if (verify) {
printf (" Verifying Checksum ... ");
if (crc32 (0, (char *)data, len) != ntohl(hdr->ih_dcrc)) {
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 92faf62..efc89dc 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -29,6 +29,10 @@
#include <cmd_boot.h>
#include <flash.h>
+#ifdef CONFIG_HAS_DATAFLASH
+#include <dataflash.h>
+#endif
+
#if (CONFIG_COMMANDS & CFG_CMD_FLASH)
extern flash_info_t flash_info[]; /* info for FLASH chips */
@@ -96,6 +100,10 @@
{
ulong bank;
+#ifdef CONFIG_HAS_DATAFLASH
+ dataflash_print_info();
+#endif
+
if (argc == 1) { /* print info for all FLASH banks */
for (bank=0; bank <CFG_MAX_FLASH_BANKS; ++bank) {
printf ("\nBank # %ld: ", bank+1);
diff --git a/common/cmd_immap.c b/common/cmd_immap.c
index 443335b..3eb5895 100644
--- a/common/cmd_immap.c
+++ b/common/cmd_immap.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -150,7 +150,24 @@
int
do_carinfo (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
{
- unimplemented (cmdtp, flag, argc, argv);
+ volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+#if defined(CONFIG_8xx)
+ volatile car8xx_t *car = &immap->im_clkrst;
+#elif defined(CONFIG_8260)
+ volatile car8260_t *car = &immap->im_clkrst;
+#endif
+
+#if defined(CONFIG_8xx)
+ printf ("SCCR = %08x\n", car->car_sccr);
+ printf ("PLPRCR= %08x\n", car->car_plprcr);
+ printf ("RSR = %08x\n", car->car_rsr);
+#elif defined(CONFIG_8260)
+ printf ("SCCR = %08x\n", car->car_sccr);
+ printf ("SCMR = %08x\n", car->car_scmr);
+ printf ("RSR = %08x\n", car->car_rsr);
+ printf ("RMR = %08x\n", car->car_rmr);
+#endif
return 0;
}
@@ -168,7 +185,7 @@
int i;
if (counter % 2)
- putc('\n');
+ putc('\n');
counter = 0;
for (i = 0; i < 4; i++, data += 79)
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index bbfe958..aca6926 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -33,6 +33,9 @@
#if (CONFIG_COMMANDS & CFG_CMD_MMC)
#include <mmc.h>
#endif
+#ifdef CONFIG_HAS_DATAFLASH
+#include <dataflash.h>
+#endif
#if (CONFIG_COMMANDS & (CFG_CMD_MEMORY | CFG_CMD_PCI | CFG_CMD_I2C\
| CMD_CMD_PORTIO))
@@ -131,6 +134,23 @@
printf("%08lx:", addr);
linebytes = (nbytes>DISP_LINE_LEN)?DISP_LINE_LEN:nbytes;
+
+#ifdef CONFIG_HAS_DATAFLASH
+ if (read_dataflash(addr, (linebytes/size)*size, linebuf) != -1){
+
+ for (i=0; i<linebytes; i+= size) {
+ if (size == 4) {
+ printf(" %08x", *uip++);
+ } else if (size == 2) {
+ printf(" %04x", *usp++);
+ } else {
+ printf(" %02x", *ucp++);
+ }
+ addr += size;
+ }
+
+ } else { /* addr does not correspond to DataFlash */
+#endif
for (i=0; i<linebytes; i+= size) {
if (size == 4) {
printf(" %08x", (*uip++ = *((uint *)addr)));
@@ -141,6 +161,9 @@
}
addr += size;
}
+#ifdef CONFIG_HAS_DATAFLASH
+ }
+#endif
printf(" ");
cp = linebuf;
for (i=0; i<linebytes; i++) {
@@ -236,6 +259,13 @@
count = simple_strtoul(argv[3], NULL, 16);
+#ifdef CONFIG_HAS_DATAFLASH
+ if (addr_dataflash(addr1) | addr_dataflash(addr2)){
+ printf("Comparison with DataFlash space not supported.\n\r");
+ return 0;
+ }
+#endif
+
ngood = 0;
while (count-- > 0) {
@@ -311,7 +341,11 @@
#ifndef CFG_NO_FLASH
/* check if we are copying to Flash */
- if (addr2info(dest) != NULL) {
+ if ( (addr2info(dest) != NULL)
+#ifdef CONFIG_HAS_DATAFLASH
+ && (!addr_dataflash(addr))
+#endif
+ ) {
int rc;
printf ("Copy to Flash... ");
@@ -366,6 +400,35 @@
}
#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ /* Check if we are copying from RAM or Flash to DataFlash */
+ if (addr_dataflash(dest) && !addr_dataflash(addr)){
+ int rc;
+
+ printf ("Copy to DataFlash... ");
+
+ rc = write_dataflash (dest, addr, count*size);
+
+ if (rc != 1) {
+ dataflash_perror (rc);
+ return (1);
+ }
+ puts ("done\n");
+ return 0;
+ }
+
+ /* Check if we are copying from DataFlash to RAM */
+ if (addr_dataflash(addr) && !addr_dataflash(dest) && (addr2info(dest)==NULL) ){
+ read_dataflash(addr, count * size, (char *) dest);
+ return 0;
+ }
+
+ if (addr_dataflash(addr) && addr_dataflash(dest)){
+ printf("Unsupported combination of source/destination.\n\r");
+ return 1;
+ }
+#endif
+
while (count-- > 0) {
if (size == 4)
*((ulong *)dest) = *((ulong *)addr);
@@ -805,6 +868,13 @@
addr += base_address;
}
+#ifdef CONFIG_HAS_DATAFLASH
+ if (addr_dataflash(addr)){
+ printf("Can't modify DataFlash in place. Use cp instead.\n\r");
+ return 0;
+ }
+#endif
+
/* Print the address, followed by value. Then accept input for
* the next value. A non-converted value exits.
*/
diff --git a/cpu/at91rm9200/Makefile b/cpu/at91rm9200/Makefile
index 0953c9f..fdf6adb 100644
--- a/cpu/at91rm9200/Makefile
+++ b/cpu/at91rm9200/Makefile
@@ -26,7 +26,8 @@
LIB = lib$(CPU).a
START = start.o
-OBJS = serial.o interrupts.o cpu.o
+OBJS = serial.o interrupts.o cpu.o \
+ at91rm9200_ether.o at45.o
all: .depend $(START) $(LIB)
diff --git a/cpu/at91rm9200/at45.c b/cpu/at91rm9200/at45.c
new file mode 100644
index 0000000..e0057e7
--- /dev/null
+++ b/cpu/at91rm9200/at45.c
@@ -0,0 +1,521 @@
+/* Driver for ATMEL DataFlash support
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/hardware.h>
+
+#ifdef CONFIG_HAS_DATAFLASH
+#include <dataflash.h>
+
+#define SPI_CLK 5000000
+#define AT91C_SPI_PCS0_SERIAL_DATAFLASH 0xE /* Chip Select 0 : NPCS0 %1110 */
+#define AT91C_SPI_PCS3_DATAFLASH_CARD 0x7 /* Chip Select 3 : NPCS3 %0111 */
+
+void AT91F_SpiInit(void) {
+
+/*-------------------------------------------------------------------*/
+/* SPI DataFlash Init */
+/*-------------------------------------------------------------------*/
+ /* Configure PIOs */
+ AT91C_BASE_PIOA->PIO_ASR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
+ AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK;
+ AT91C_BASE_PIOA->PIO_PDR = AT91C_PA3_NPCS0 | AT91C_PA4_NPCS1 | AT91C_PA1_MOSI | AT91C_PA5_NPCS2 |
+ AT91C_PA6_NPCS3 | AT91C_PA0_MISO | AT91C_PA2_SPCK;
+ /* Enable CLock */
+ AT91C_BASE_PMC->PMC_PCER = 1 << AT91C_ID_SPI;
+
+ /* Reset the SPI */
+ AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SWRST;
+
+ /* Configure SPI in Master Mode with No CS selected !!! */
+ AT91C_BASE_SPI->SPI_MR = AT91C_SPI_MSTR | AT91C_SPI_MODFDIS | AT91C_SPI_PCS;
+
+ /* Configure CS0 and CS3 */
+ *(AT91C_SPI_CSR + 0) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & 0x100000) | ((AT91C_MASTER_CLOCK / (2*SPI_CLK)) << 8);
+
+ *(AT91C_SPI_CSR + 3) = AT91C_SPI_CPOL | (AT91C_SPI_DLYBS & 0x100000) | ((AT91C_MASTER_CLOCK / (2*SPI_CLK)) << 8);
+
+}
+
+void AT91F_SpiEnable(int cs) {
+ switch(cs) {
+ case 0: /* Configure SPI CS0 for Serial DataFlash AT45DBxx */
+ AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
+ AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS0_SERIAL_DATAFLASH<<16) & AT91C_SPI_PCS);
+ break;
+ case 3: /* Configure SPI CS3 for Serial DataFlash Card */
+ /* Set up PIO SDC_TYPE to switch on DataFlash Card and not MMC/SDCard */
+ AT91C_BASE_PIOB->PIO_PER = AT91C_PIO_PB7; /* Set in PIO mode */
+ AT91C_BASE_PIOB->PIO_OER = AT91C_PIO_PB7; /* Configure in output */
+ /* Clear Output */
+ AT91C_BASE_PIOB->PIO_CODR = AT91C_PIO_PB7;
+ /* Configure PCS */
+ AT91C_BASE_SPI->SPI_MR &= 0xFFF0FFFF;
+ AT91C_BASE_SPI->SPI_MR |= ((AT91C_SPI_PCS3_DATAFLASH_CARD<<16) & AT91C_SPI_PCS);
+ break;
+ }
+
+ /* SPI_Enable */
+ AT91C_BASE_SPI->SPI_CR = AT91C_SPI_SPIEN;
+}
+
+/*----------------------------------------------------------------------------*/
+/* \fn AT91F_SpiWrite */
+/* \brief Set the PDC registers for a transfert */
+/*----------------------------------------------------------------------------*/
+unsigned int AT91F_SpiWrite ( AT91PS_DataflashDesc pDesc )
+{
+ unsigned int timeout;
+
+ pDesc->state = BUSY;
+
+ AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
+
+ /* Initialize the Transmit and Receive Pointer */
+ AT91C_BASE_SPI->SPI_RPR = (unsigned int)pDesc->rx_cmd_pt ;
+ AT91C_BASE_SPI->SPI_TPR = (unsigned int)pDesc->tx_cmd_pt ;
+
+ /* Intialize the Transmit and Receive Counters */
+ AT91C_BASE_SPI->SPI_RCR = pDesc->rx_cmd_size;
+ AT91C_BASE_SPI->SPI_TCR = pDesc->tx_cmd_size;
+
+ if ( pDesc->tx_data_size != 0 ) {
+ /* Initialize the Next Transmit and Next Receive Pointer */
+ AT91C_BASE_SPI->SPI_RNPR = (unsigned int)pDesc->rx_data_pt ;
+ AT91C_BASE_SPI->SPI_TNPR = (unsigned int)pDesc->tx_data_pt ;
+
+ /* Intialize the Next Transmit and Next Receive Counters */
+ AT91C_BASE_SPI->SPI_RNCR = pDesc->rx_data_size ;
+ AT91C_BASE_SPI->SPI_TNCR = pDesc->tx_data_size ;
+ }
+
+ /* arm simple, non interrupt dependent timer */
+ reset_timer_masked();
+ timeout = 0;
+
+ AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTEN + AT91C_PDC_RXTEN;
+ while(!(AT91C_BASE_SPI->SPI_SR & AT91C_SPI_RXBUFF) && ((timeout = get_timer_masked() ) < CFG_SPI_WRITE_TOUT));
+ AT91C_BASE_SPI->SPI_PTCR = AT91C_PDC_TXTDIS + AT91C_PDC_RXTDIS;
+ pDesc->state = IDLE;
+
+ if (timeout >= CFG_SPI_WRITE_TOUT){
+ printf("Error Timeout\n\r");
+ return DATAFLASH_ERROR;
+ }
+
+ return DATAFLASH_OK;
+}
+
+
+/*----------------------------------------------------------------------*/
+/* \fn AT91F_DataFlashSendCommand */
+/* \brief Generic function to send a command to the dataflash */
+/*----------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashSendCommand(
+ AT91PS_DataFlash pDataFlash,
+ unsigned char OpCode,
+ unsigned int CmdSize,
+ unsigned int DataflashAddress)
+{
+ unsigned int adr;
+
+ if ( (pDataFlash->pDataFlashDesc->state) != IDLE)
+ return DATAFLASH_BUSY;
+
+ /* process the address to obtain page address and byte address */
+ adr = ((DataflashAddress / (pDataFlash->pDevice->pages_size)) << pDataFlash->pDevice->page_offset) + (DataflashAddress % (pDataFlash->pDevice->pages_size));
+
+ /* fill the command buffer */
+ pDataFlash->pDataFlashDesc->command[0] = OpCode;
+ pDataFlash->pDataFlashDesc->command[1] = (unsigned char)((adr & 0x00FF0000) >> 16);
+ pDataFlash->pDataFlashDesc->command[2] = (unsigned char)((adr & 0x0000FF00) >> 8);
+ pDataFlash->pDataFlashDesc->command[3] = (unsigned char)(adr & 0x000000FF) ;
+ pDataFlash->pDataFlashDesc->command[4] = 0;
+ pDataFlash->pDataFlashDesc->command[5] = 0;
+ pDataFlash->pDataFlashDesc->command[6] = 0;
+ pDataFlash->pDataFlashDesc->command[7] = 0;
+
+ /* Initialize the SpiData structure for the spi write fuction */
+ pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ;
+ pDataFlash->pDataFlashDesc->tx_cmd_size = CmdSize ;
+ pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ;
+ pDataFlash->pDataFlashDesc->rx_cmd_size = CmdSize ;
+
+ /* send the command and read the data */
+ return AT91F_SpiWrite (pDataFlash->pDataFlashDesc);
+}
+
+
+/*----------------------------------------------------------------------*/
+/* \fn AT91F_DataFlashGetStatus */
+/* \brief Read the status register of the dataflash */
+/*----------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashGetStatus(AT91PS_DataflashDesc pDesc)
+{
+ AT91S_DataFlashStatus status;
+
+ /* if a transfert is in progress ==> return 0 */
+ if( (pDesc->state) != IDLE)
+ return DATAFLASH_BUSY;
+
+ /* first send the read status command (D7H) */
+ pDesc->command[0] = DB_STATUS;
+ pDesc->command[1] = 0;
+
+ pDesc->DataFlash_state = GET_STATUS;
+ pDesc->tx_data_size = 0 ; /* Transmit the command and receive response */
+ pDesc->tx_cmd_pt = pDesc->command ;
+ pDesc->rx_cmd_pt = pDesc->command ;
+ pDesc->rx_cmd_size = 2 ;
+ pDesc->tx_cmd_size = 2 ;
+ status = AT91F_SpiWrite (pDesc);
+
+ pDesc->DataFlash_state = *( (unsigned char *) (pDesc->rx_cmd_pt) +1);
+
+ return status;
+}
+
+
+/*----------------------------------------------------------------------*/
+/* \fn AT91F_DataFlashWaitReady */
+/* \brief wait for dataflash ready (bit7 of the status register == 1) */
+/*----------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashWaitReady(AT91PS_DataflashDesc pDataFlashDesc, unsigned int timeout)
+{
+ pDataFlashDesc->DataFlash_state = IDLE;
+
+ do {
+ AT91F_DataFlashGetStatus(pDataFlashDesc);
+ timeout--;
+ }
+ while( ((pDataFlashDesc->DataFlash_state & 0x80) != 0x80) && (timeout > 0) );
+
+ if((pDataFlashDesc->DataFlash_state & 0x80) != 0x80)
+ return DATAFLASH_ERROR;
+
+ return DATAFLASH_OK;
+}
+
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : AT91F_DataFlashContinuousRead */
+/* Object : Continuous stream Read */
+/* Input Parameters : DataFlash Service */
+/* : <src> = dataflash address */
+/* : <*dataBuffer> = data buffer pointer */
+/* : <sizeToRead> = data buffer size */
+/* Return value : State of the dataflash */
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashContinuousRead (
+ AT91PS_DataFlash pDataFlash,
+ int src,
+ unsigned char *dataBuffer,
+ int sizeToRead )
+{
+ /* Test the size to read in the device */
+ if ( (src + sizeToRead) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
+ return DATAFLASH_MEMORY_OVERFLOW;
+
+ pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer;
+ pDataFlash->pDataFlashDesc->rx_data_size = sizeToRead;
+ pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer;
+ pDataFlash->pDataFlashDesc->tx_data_size = sizeToRead;
+
+ /* Send the command to the dataflash */
+ return(AT91F_DataFlashSendCommand (pDataFlash, DB_CONTINUOUS_ARRAY_READ, 8, src));
+}
+
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : AT91F_DataFlashPagePgmBuf */
+/* Object : Main memory page program through buffer 1 or buffer 2 */
+/* Input Parameters : DataFlash Service */
+/* : <*src> = Source buffer */
+/* : <dest> = dataflash destination address */
+/* : <SizeToWrite> = data buffer size */
+/* Return value : State of the dataflash */
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashPagePgmBuf(
+ AT91PS_DataFlash pDataFlash,
+ unsigned char *src,
+ unsigned int dest,
+ unsigned int SizeToWrite)
+{
+ pDataFlash->pDataFlashDesc->tx_data_pt = src ;
+ pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ;
+ pDataFlash->pDataFlashDesc->rx_data_pt = src;
+ pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite;
+
+ /* Send the command to the dataflash */
+ return(AT91F_DataFlashSendCommand (pDataFlash, DB_PAGE_PGM_BUF1, 4, dest));
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : AT91F_MainMemoryToBufferTransfert */
+/* Object : Read a page in the SRAM Buffer 1 or 2 */
+/* Input Parameters : DataFlash Service */
+/* : Page concerned */
+/* : */
+/* Return value : State of the dataflash */
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_MainMemoryToBufferTransfert(
+ AT91PS_DataFlash pDataFlash,
+ unsigned char BufferCommand,
+ unsigned int page)
+{
+ /* Test if the buffer command is legal */
+ if ((BufferCommand != DB_PAGE_2_BUF1_TRF) && (BufferCommand != DB_PAGE_2_BUF2_TRF))
+ return DATAFLASH_BAD_COMMAND;
+
+ /* no data to transmit or receive */
+ pDataFlash->pDataFlashDesc->tx_data_size = 0;
+
+ return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, 4, page*pDataFlash->pDevice->pages_size));
+}
+
+
+
+/*----------------------------------------------------------------------------- */
+/* Function Name : AT91F_DataFlashWriteBuffer */
+/* Object : Write data to the internal sram buffer 1 or 2 */
+/* Input Parameters : DataFlash Service */
+/* : <BufferCommand> = command to write buffer1 or buffer2 */
+/* : <*dataBuffer> = data buffer to write */
+/* : <bufferAddress> = address in the internal buffer */
+/* : <SizeToWrite> = data buffer size */
+/* Return value : State of the dataflash */
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashWriteBuffer (
+ AT91PS_DataFlash pDataFlash,
+ unsigned char BufferCommand,
+ unsigned char *dataBuffer,
+ unsigned int bufferAddress,
+ int SizeToWrite )
+{
+ /* Test if the buffer command is legal */
+ if ((BufferCommand != DB_BUF1_WRITE) && (BufferCommand != DB_BUF2_WRITE))
+ return DATAFLASH_BAD_COMMAND;
+
+ /* buffer address must be lower than page size */
+ if (bufferAddress > pDataFlash->pDevice->pages_size)
+ return DATAFLASH_BAD_ADDRESS;
+
+ if ( (pDataFlash->pDataFlashDesc->state) != IDLE)
+ return DATAFLASH_BUSY;
+
+ /* Send first Write Command */
+ pDataFlash->pDataFlashDesc->command[0] = BufferCommand;
+ pDataFlash->pDataFlashDesc->command[1] = 0;
+ pDataFlash->pDataFlashDesc->command[2] = (unsigned char)(((unsigned int)(bufferAddress & pDataFlash->pDevice->byte_mask)) >> 8) ;
+ pDataFlash->pDataFlashDesc->command[3] = (unsigned char)((unsigned int)bufferAddress & 0x00FF) ;
+
+
+ pDataFlash->pDataFlashDesc->tx_cmd_pt = pDataFlash->pDataFlashDesc->command ;
+ pDataFlash->pDataFlashDesc->tx_cmd_size = 4 ;
+ pDataFlash->pDataFlashDesc->rx_cmd_pt = pDataFlash->pDataFlashDesc->command ;
+ pDataFlash->pDataFlashDesc->rx_cmd_size = 4 ;
+
+ pDataFlash->pDataFlashDesc->rx_data_pt = dataBuffer ;
+ pDataFlash->pDataFlashDesc->tx_data_pt = dataBuffer ;
+ pDataFlash->pDataFlashDesc->rx_data_size = SizeToWrite ;
+ pDataFlash->pDataFlashDesc->tx_data_size = SizeToWrite ;
+
+ return AT91F_SpiWrite(pDataFlash->pDataFlashDesc);
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : AT91F_WriteBufferToMain */
+/* Object : Write buffer to the main memory */
+/* Input Parameters : DataFlash Service */
+/* : <BufferCommand> = command to send to buffer1 or buffer2 */
+/* : <dest> = main memory address */
+/* Return value : State of the dataflash */
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_WriteBufferToMain (
+ AT91PS_DataFlash pDataFlash,
+ unsigned char BufferCommand,
+ unsigned int dest )
+{
+ /* Test if the buffer command is correct */
+ if ((BufferCommand != DB_BUF1_PAGE_PGM) &&
+ (BufferCommand != DB_BUF1_PAGE_ERASE_PGM) &&
+ (BufferCommand != DB_BUF2_PAGE_PGM) &&
+ (BufferCommand != DB_BUF2_PAGE_ERASE_PGM) )
+ return DATAFLASH_BAD_COMMAND;
+
+ /* no data to transmit or receive */
+ pDataFlash->pDataFlashDesc->tx_data_size = 0;
+
+ /* Send the command to the dataflash */
+ return(AT91F_DataFlashSendCommand (pDataFlash, BufferCommand, 4, dest));
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : AT91F_PartialPageWrite */
+/* Object : Erase partielly a page */
+/* Input Parameters : <page> = page number */
+/* : <AdrInpage> = adr to begin the fading */
+/* : <length> = Number of bytes to erase */
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_PartialPageWrite (
+ AT91PS_DataFlash pDataFlash,
+ unsigned char *src,
+ unsigned int dest,
+ unsigned int size)
+{
+ unsigned int page;
+ unsigned int AdrInPage;
+
+ page = dest / (pDataFlash->pDevice->pages_size);
+ AdrInPage = dest % (pDataFlash->pDevice->pages_size);
+
+ /* Read the contents of the page in the Sram Buffer */
+ AT91F_MainMemoryToBufferTransfert(pDataFlash, DB_PAGE_2_BUF1_TRF, page);
+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 1000);
+ /*Update the SRAM buffer */
+ AT91F_DataFlashWriteBuffer(pDataFlash, DB_BUF1_WRITE, src, AdrInPage, size);
+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 1000);
+
+ /* Rewrite the modified Sram Buffer in the main memory */
+ return(AT91F_WriteBufferToMain(pDataFlash, DB_BUF1_PAGE_ERASE_PGM, (page*pDataFlash->pDevice->pages_size)));
+}
+
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : AT91F_DataFlashWrite_Overloaded */
+/* Object : */
+/* Input Parameters : <*src> = Source buffer */
+/* : <dest> = dataflash adress */
+/* : <size> = data buffer size */
+/*------------------------------------------------------------------------------*/
+AT91S_DataFlashStatus AT91F_DataFlashWrite(
+ AT91PS_DataFlash pDataFlash,
+ unsigned char *src,
+ int dest,
+ int size )
+{
+ unsigned int length;
+
+ AT91F_SpiEnable(pDataFlash->pDevice->cs);
+
+ if ( (dest + size) > (pDataFlash->pDevice->pages_size * (pDataFlash->pDevice->pages_number)))
+ return DATAFLASH_MEMORY_OVERFLOW;
+
+ /* If destination does not fit a page start address */
+ if ((dest % ((unsigned int)(pDataFlash->pDevice->pages_size))) != 0 ) {
+ length = pDataFlash->pDevice->pages_size - (dest % ((unsigned int)(pDataFlash->pDevice->pages_size)));
+
+ if (size < length)
+ length = size;
+
+ if(!AT91F_PartialPageWrite(pDataFlash,src, dest, length))
+ return DATAFLASH_ERROR;
+
+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 1000);
+
+ /* Update size, source and destination pointers */
+ size -= length;
+ dest += length;
+ src += length;
+ }
+
+ while (( size - pDataFlash->pDevice->pages_size ) >= 0 ) {
+ /* program dataflash page */
+ if(!AT91F_DataFlashPagePgmBuf(pDataFlash, src, dest, pDataFlash->pDevice->pages_size ))
+ return DATAFLASH_ERROR;
+
+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 1000);
+
+ /* Update size, source and destination pointers */
+ size -= pDataFlash->pDevice->pages_size ;
+ dest += pDataFlash->pDevice->pages_size ;
+ src += pDataFlash->pDevice->pages_size ;
+ }
+
+ /* If still some bytes to read */
+ if ( size > 0 ) {
+ /* program dataflash page */
+ if(!AT91F_PartialPageWrite(pDataFlash, src, dest, size) )
+ return DATAFLASH_ERROR;
+
+ AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 1000);
+ }
+ return DATAFLASH_OK;
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : AT91F_DataFlashRead */
+/* Object : Read a block in dataflash */
+/* Input Parameters : */
+/* Return value : */
+/*------------------------------------------------------------------------------*/
+int AT91F_DataFlashRead(
+ AT91PS_DataFlash pDataFlash,
+ unsigned long addr,
+ unsigned long size,
+ char *buffer)
+{
+ unsigned long SizeToRead;
+
+ AT91F_SpiEnable(pDataFlash->pDevice->cs);
+
+ if(AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 1000) != DATAFLASH_OK)
+ return -1;
+
+ while (size) {
+ SizeToRead = (size < 0x8000)? size:0x8000;
+
+ if (AT91F_DataFlashWaitReady(pDataFlash->pDataFlashDesc, 1000) != DATAFLASH_OK)
+ return -1;
+
+ if (AT91F_DataFlashContinuousRead (pDataFlash, addr, buffer, SizeToRead) != DATAFLASH_OK)
+ return -1;
+
+ size -= SizeToRead;
+ addr += SizeToRead;
+ buffer += SizeToRead;
+ }
+
+ return DATAFLASH_OK;
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : AT91F_DataflashProbe */
+/* Object : */
+/* Input Parameters : */
+/* Return value : Dataflash status register */
+/*------------------------------------------------------------------------------*/
+int AT91F_DataflashProbe(int cs, AT91PS_DataflashDesc pDesc)
+{
+ AT91F_SpiEnable(cs);
+ AT91F_DataFlashGetStatus(pDesc);
+ return((pDesc->command[1] == 0xFF)? 0: pDesc->command[1] & 0x3C);
+}
+
+#endif
diff --git a/cpu/at91rm9200/at91rm9200_ether.c b/cpu/at91rm9200/at91rm9200_ether.c
new file mode 100644
index 0000000..6e44150
--- /dev/null
+++ b/cpu/at91rm9200/at91rm9200_ether.c
@@ -0,0 +1,468 @@
+/*
+ * (C) Copyright 2003
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <at91rm9200_net.h>
+#include <net.h>
+
+/* ----- Ethernet Buffer definitions ----- */
+
+typedef struct {
+ unsigned long addr, size;
+} rbf_t;
+
+#define RBF_ADDR 0xfffffffc
+#define RBF_OWNER (1<<0)
+#define RBF_WRAP (1<<1)
+#define RBF_BROADCAST (1<<31)
+#define RBF_MULTICAST (1<<30)
+#define RBF_UNICAST (1<<29)
+#define RBF_EXTERNAL (1<<28)
+#define RBF_UNKOWN (1<<27)
+#define RBF_SIZE 0x07ff
+#define RBF_LOCAL4 (1<<26)
+#define RBF_LOCAL3 (1<<25)
+#define RBF_LOCAL2 (1<<24)
+#define RBF_LOCAL1 (1<<23)
+
+/* Emac Buffers in last 512KBytes of SDRAM*/
+/* Be careful, buffer size is limited to 512KBytes !!! */
+#define RBF_FRAMEMAX 100
+/*#define RBF_FRAMEMEM 0x200000 */
+#define RBF_FRAMEMEM 0x21F80000
+#define RBF_FRAMELEN 0x600
+
+#define RBF_FRAMEBTD RBF_FRAMEMEM
+#define RBF_FRAMEBUF (RBF_FRAMEMEM + RBF_FRAMEMAX*sizeof(rbf_t))
+
+
+#ifdef CONFIG_DRIVER_ETHER
+
+#if (CONFIG_COMMANDS & CFG_CMD_NET)
+
+/* structure to interface the PHY */
+AT91S_PhyOps AT91S_Dm9161Ops;
+AT91PS_PhyOps pPhyOps;
+
+AT91PS_EMAC p_mac;
+
+/*************************** Phy layer functions ************************/
+/** functions to interface the DAVICOM 10/100Mbps ethernet phy **********/
+
+/*
+ * Name:
+ * dm9161_IsPhyConnected
+ * Description:
+ * Reads the 2 PHY ID registers
+ * Arguments:
+ * p_mac - pointer to AT91S_EMAC struct
+ * Return value:
+ * TRUE - if id read successfully
+ * FALSE- if error
+ */
+static unsigned int dm9161_IsPhyConnected (AT91PS_EMAC p_mac)
+{
+ unsigned short Id1, Id2;
+
+ at91rm9200_EmacEnableMDIO (p_mac);
+ at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID1, &Id1);
+ at91rm9200_EmacReadPhy (p_mac, DM9161_PHYID2, &Id2);
+ at91rm9200_EmacDisableMDIO (p_mac);
+
+ if ((Id1 == (DM9161_PHYID1_OUI >> 6)) &&
+ ((Id2 >> 10) == (DM9161_PHYID1_OUI & DM9161_LSB_MASK)))
+ return TRUE;
+
+ return FALSE;
+}
+
+/*
+ * Name:
+ * dm9161_GetLinkSpeed
+ * Description:
+ * Link parallel detection status of MAC is checked and set in the
+ * MAC configuration registers
+ * Arguments:
+ * p_mac - pointer to MAC
+ * Return value:
+ * TRUE - if link status set succesfully
+ * FALSE - if link status not set
+ */
+static UCHAR dm9161_GetLinkSpeed (AT91PS_EMAC p_mac)
+{
+ unsigned short stat1, stat2;
+
+ if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &stat1))
+ return FALSE;
+
+ if (!(stat1 & DM9161_LINK_STATUS)) /* link status up? */
+ return FALSE;
+
+ if (!at91rm9200_EmacReadPhy (p_mac, DM9161_DSCSR, &stat2))
+ return FALSE;
+
+ if ((stat1 & DM9161_100BASE_TX_FD) && (stat2 & DM9161_100FDX)) {
+ /*set Emac for 100BaseTX and Full Duplex */
+ p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
+ return TRUE;
+ }
+
+ if ((stat1 & DM9161_10BASE_T_FD) && (stat2 & DM9161_10FDX)) {
+ /*set MII for 10BaseT and Full Duplex */
+ p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+ ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+ | AT91C_EMAC_FD;
+ return TRUE;
+ }
+
+ if ((stat1 & DM9161_100BASE_T4_HD) && (stat2 & DM9161_100HDX)) {
+ /*set MII for 100BaseTX and Half Duplex */
+ p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+ ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+ | AT91C_EMAC_SPD;
+ return TRUE;
+ }
+
+ if ((stat1 & DM9161_10BASE_T_HD) && (stat2 & DM9161_10HDX)) {
+ /*set MII for 10BaseT and Half Duplex */
+ p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
+ return TRUE;
+ }
+ return FALSE;
+}
+
+
+/*
+ * Name:
+ * dm9161_InitPhy
+ * Description:
+ * MAC starts checking its link by using parallel detection and
+ * Autonegotiation and the same is set in the MAC configuration registers
+ * Arguments:
+ * p_mac - pointer to struct AT91S_EMAC
+ * Return value:
+ * TRUE - if link status set succesfully
+ * FALSE - if link status not set
+ */
+static UCHAR dm9161_InitPhy (AT91PS_EMAC p_mac)
+{
+ UCHAR ret = TRUE;
+ unsigned short IntValue;
+
+ at91rm9200_EmacEnableMDIO (p_mac);
+
+ if (!dm9161_GetLinkSpeed (p_mac)) {
+ /* Try another time */
+ ret = dm9161_GetLinkSpeed (p_mac);
+ }
+
+ /* Disable PHY Interrupts */
+ at91rm9200_EmacReadPhy (p_mac, DM9161_MDINTR, &IntValue);
+ /* clear FDX, SPD, Link, INTR masks */
+ IntValue &= ~(DM9161_FDX_MASK | DM9161_SPD_MASK |
+ DM9161_LINK_MASK | DM9161_INTR_MASK);
+ at91rm9200_EmacWritePhy (p_mac, DM9161_MDINTR, &IntValue);
+ at91rm9200_EmacDisableMDIO (p_mac);
+
+ return (ret);
+}
+
+
+/*
+ * Name:
+ * dm9161_AutoNegotiate
+ * Description:
+ * MAC Autonegotiates with the partner status of same is set in the
+ * MAC configuration registers
+ * Arguments:
+ * dev - pointer to struct net_device
+ * Return value:
+ * TRUE - if link status set successfully
+ * FALSE - if link status not set
+ */
+static UCHAR dm9161_AutoNegotiate (AT91PS_EMAC p_mac, int *status)
+{
+ unsigned short value;
+ unsigned short PhyAnar;
+ unsigned short PhyAnalpar;
+
+ /* Set dm9161 control register */
+ if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
+ return FALSE;
+ value &= ~DM9161_AUTONEG; /* remove autonegotiation enable */
+ value |= DM9161_ISOLATE; /* Electrically isolate PHY */
+ if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+ return FALSE;
+
+ /* Set the Auto_negotiation Advertisement Register */
+ /* MII advertising for Next page, 100BaseTxFD and HD, 10BaseTFD and HD, IEEE 802.3 */
+ PhyAnar = DM9161_NP | DM9161_TX_FDX | DM9161_TX_HDX |
+ DM9161_10_FDX | DM9161_10_HDX | DM9161_AN_IEEE_802_3;
+ if (!at91rm9200_EmacWritePhy (p_mac, DM9161_ANAR, &PhyAnar))
+ return FALSE;
+
+ /* Read the Control Register */
+ if (!at91rm9200_EmacReadPhy (p_mac, DM9161_BMCR, &value))
+ return FALSE;
+
+ value |= DM9161_SPEED_SELECT | DM9161_AUTONEG | DM9161_DUPLEX_MODE;
+ if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+ return FALSE;
+ /* Restart Auto_negotiation */
+ value |= DM9161_RESTART_AUTONEG;
+ if (!at91rm9200_EmacWritePhy (p_mac, DM9161_BMCR, &value))
+ return FALSE;
+
+ /*check AutoNegotiate complete */
+ udelay (10000);
+ at91rm9200_EmacReadPhy (p_mac, DM9161_BMSR, &value);
+ if (!(value & DM9161_AUTONEG_COMP))
+ return FALSE;
+
+ /* Get the AutoNeg Link partner base page */
+ if (!at91rm9200_EmacReadPhy (p_mac, DM9161_ANLPAR, &PhyAnalpar))
+ return FALSE;
+
+ if ((PhyAnar & DM9161_TX_FDX) && (PhyAnalpar & DM9161_TX_FDX)) {
+ /*set MII for 100BaseTX and Full Duplex */
+ p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
+ return TRUE;
+ }
+
+ if ((PhyAnar & DM9161_10_FDX) && (PhyAnalpar & DM9161_10_FDX)) {
+ /*set MII for 10BaseT and Full Duplex */
+ p_mac->EMAC_CFG = (p_mac->EMAC_CFG &
+ ~(AT91C_EMAC_SPD | AT91C_EMAC_FD))
+ | AT91C_EMAC_FD;
+ return TRUE;
+ }
+ return FALSE;
+}
+
+
+
+
+/*********** EMAC Phy layer Management functions *************************/
+/*
+ * Name:
+ * at91rm9200_EmacEnableMDIO
+ * Description:
+ * Enables the MDIO bit in MAC control register
+ * Arguments:
+ * p_mac - pointer to struct AT91S_EMAC
+ * Return value:
+ * none
+ */
+static void at91rm9200_EmacEnableMDIO (AT91PS_EMAC p_mac)
+{
+ /* Mac CTRL reg set for MDIO enable */
+ p_mac->EMAC_CTL |= AT91C_EMAC_MPE; /* Management port enable */
+}
+
+/*
+ * Name:
+ * at91rm9200_EmacDisableMDIO
+ * Description:
+ * Disables the MDIO bit in MAC control register
+ * Arguments:
+ * p_mac - pointer to struct AT91S_EMAC
+ * Return value:
+ * none
+ */
+static void at91rm9200_EmacDisableMDIO (AT91PS_EMAC p_mac)
+{
+ /* Mac CTRL reg set for MDIO disable */
+ p_mac->EMAC_CTL &= ~AT91C_EMAC_MPE; /* Management port disable */
+}
+
+
+/*
+ * Name:
+ * at91rm9200_EmacReadPhy
+ * Description:
+ * Reads data from the PHY register
+ * Arguments:
+ * dev - pointer to struct net_device
+ * RegisterAddress - unsigned char
+ * pInput - pointer to value read from register
+ * Return value:
+ * TRUE - if data read successfully
+ */
+static UCHAR at91rm9200_EmacReadPhy (AT91PS_EMAC p_mac,
+ unsigned char RegisterAddress,
+ unsigned short *pInput)
+{
+ p_mac->EMAC_MAN = (AT91C_EMAC_HIGH & ~AT91C_EMAC_LOW) |
+ (AT91C_EMAC_CODE_802_3) | (AT91C_EMAC_RW_R) |
+ (RegisterAddress << 18);
+
+ udelay (10000);
+
+ *pInput = (unsigned short) p_mac->EMAC_MAN;
+
+ return TRUE;
+}
+
+
+/*
+ * Name:
+ * at91rm9200_EmacWritePhy
+ * Description:
+ * Writes data to the PHY register
+ * Arguments:
+ * dev - pointer to struct net_device
+ * RegisterAddress - unsigned char
+ * pOutput - pointer to value to be written in the register
+ * Return value:
+ * TRUE - if data read successfully
+ */
+static UCHAR at91rm9200_EmacWritePhy (AT91PS_EMAC p_mac,
+ unsigned char RegisterAddress,
+ unsigned short *pOutput)
+{
+ p_mac->EMAC_MAN = (AT91C_EMAC_HIGH & ~AT91C_EMAC_LOW) |
+ AT91C_EMAC_CODE_802_3 | AT91C_EMAC_RW_W |
+ (RegisterAddress << 18);
+
+ udelay (10000);
+
+ return TRUE;
+}
+
+/*
+ * Name:
+ * at91rm92000_GetPhyInterface
+ * Description:
+ * Initialise the interface functions to the PHY
+ * Arguments:
+ * None
+ * Return value:
+ * None
+ */
+void at91rm92000_GetPhyInterface (void)
+{
+ AT91S_Dm9161Ops.Init = dm9161_InitPhy;
+ AT91S_Dm9161Ops.IsPhyConnected = dm9161_IsPhyConnected;
+ AT91S_Dm9161Ops.GetLinkSpeed = dm9161_GetLinkSpeed;
+ AT91S_Dm9161Ops.AutoNegotiate = dm9161_AutoNegotiate;
+
+ pPhyOps = (AT91PS_PhyOps) & AT91S_Dm9161Ops;
+}
+
+
+rbf_t *rbfdt;
+rbf_t *rbfp;
+
+int eth_init (bd_t * bd)
+{
+ int ret;
+ int i;
+
+ p_mac = AT91C_BASE_EMAC;
+
+ *AT91C_PIOA_PDR = AT91C_PA16_EMDIO | AT91C_PA15_EMDC | AT91C_PA14_ERXER | AT91C_PA13_ERX1 | AT91C_PA12_ERX0 | AT91C_PA11_ECRS_ECRSDV | AT91C_PA10_ETX1 | AT91C_PA9_ETX0 | AT91C_PA8_ETXEN | AT91C_PA7_ETXCK_EREFCK; /* PIO Disable Register */
+
+ *AT91C_PIOB_PDR = AT91C_PB25_EF100 |
+ AT91C_PB19_ERXCK | AT91C_PB18_ECOL | AT91C_PB17_ERXDV |
+ AT91C_PB16_ERX3 | AT91C_PB15_ERX2 | AT91C_PB14_ETXER |
+ AT91C_PB13_ETX3 | AT91C_PB12_ETX2;
+
+ *AT91C_PIOB_BSR = AT91C_PB25_EF100 | AT91C_PB19_ERXCK | AT91C_PB18_ECOL | AT91C_PB17_ERXDV | AT91C_PB16_ERX3 | AT91C_PB15_ERX2 | AT91C_PB14_ETXER | AT91C_PB13_ETX3 | AT91C_PB12_ETX2; /* Select B Register */
+
+ *AT91C_PMC_PCER = 1 << AT91C_ID_EMAC; /* Peripheral Clock Enable Register */
+
+ p_mac->EMAC_CFG |= AT91C_EMAC_CSR; /* Clear statistics */
+
+ /* Init Ehternet buffers */
+ rbfdt = (rbf_t *) RBF_FRAMEBTD;
+ for (i = 0; i < RBF_FRAMEMAX; i++) {
+ rbfdt[i].addr = RBF_FRAMEBUF + RBF_FRAMELEN * i;
+ rbfdt[i].size = 0;
+ }
+ rbfdt[RBF_FRAMEMAX - 1].addr |= RBF_WRAP;
+ rbfp = &rbfdt[0];
+
+ at91rm92000_GetPhyInterface ();
+
+ if (!pPhyOps->IsPhyConnected (p_mac))
+ printf ("PHY not connected!!\n\r");
+
+ /* MII management start from here */
+ if (!(p_mac->EMAC_SR & AT91C_EMAC_LINK)) {
+ if (!(ret = pPhyOps->Init (p_mac))) {
+ printf ("MAC: error during MII initialization\n");
+ return 0;
+ }
+ } else {
+ printf ("No link\n\r");
+ return 0;
+ }
+
+ p_mac->EMAC_SA2L = (bd->bi_enetaddr[3] << 24) | (bd->bi_enetaddr[2] << 16)
+ | (bd->bi_enetaddr[1] << 8) | (bd->bi_enetaddr[0]);
+ p_mac->EMAC_SA2H = (bd->bi_enetaddr[5] << 8) | (bd->bi_enetaddr[4]);
+
+ p_mac->EMAC_RBQP = (long) (&rbfdt[0]);
+ p_mac->EMAC_RSR &= ~(AT91C_EMAC_RSR_OVR | AT91C_EMAC_REC | AT91C_EMAC_BNA);
+ p_mac->EMAC_CFG = (p_mac->EMAC_CFG | AT91C_EMAC_CAF | AT91C_EMAC_NBC | AT91C_EMAC_RMII)
+ & ~AT91C_EMAC_CLK;
+ p_mac->EMAC_CTL |= AT91C_EMAC_TE | AT91C_EMAC_RE;
+
+ return 0;
+}
+
+int eth_send (volatile void *packet, int length)
+{
+ while (!(p_mac->EMAC_TSR & AT91C_EMAC_BNQ));
+ p_mac->EMAC_TAR = (long) packet;
+ p_mac->EMAC_TCR = length;
+ while (p_mac->EMAC_TCR & 0x7ff);
+ p_mac->EMAC_TSR |= AT91C_EMAC_COMP;
+ return 0;
+}
+
+int eth_rx (void)
+{
+ int size;
+
+ if (!(rbfp->addr & RBF_OWNER))
+ return 0;
+
+ size = rbfp->size & RBF_SIZE;
+ NetReceive ((volatile uchar *) (rbfp->addr & RBF_ADDR), size);
+
+ rbfp->addr &= ~RBF_OWNER;
+ if (rbfp->addr & RBF_WRAP)
+ rbfp = &rbfdt[0];
+ else
+ rbfp++;
+
+ p_mac->EMAC_RSR |= AT91C_EMAC_REC;
+
+ return size;
+}
+
+void eth_halt (void)
+{
+};
+#endif /* CONFIG_COMMANDS & CFG_CMD_NET */
+#endif /* CONFIG_DRIVER_ETHER */
diff --git a/cpu/ppc4xx/start.S b/cpu/ppc4xx/start.S
index 6736b73..c6a9eda 100644
--- a/cpu/ppc4xx/start.S
+++ b/cpu/ppc4xx/start.S
@@ -716,7 +716,7 @@
#endif
/* Machine check */
- STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
+ CRIT_EXCEPTION(0x200, MachineCheck, MachineCheckException)
/* Data Storage exception. */
STD_EXCEPTION(0x300, DataStorage, UnknownException)
diff --git a/drivers/Makefile b/drivers/Makefile
index c1fa419..50fc75a 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -27,9 +27,9 @@
LIB = libdrivers.a
-OBJS = 3c589.o 5701rls.o ali512x.o at91rm9200_ether.o \
+OBJS = 3c589.o 5701rls.o ali512x.o \
bcm570x.o bcm570x_autoneg.o cfb_console.o \
- cs8900.o ct69000.o dc2114x.o \
+ cs8900.o ct69000.o dataflash.o dc2114x.o \
e1000.o eepro100.o \
i8042.o i82365.o inca-ip_sw.o \
lan91c96.o natsemi.o \
@@ -41,7 +41,7 @@
ti_pci1410a.o tigon3.o w83c553f.o
## Disabled for now:
-## cs8900.o ct69000.o dc2114x.o ds1722.o \
+## cs8900.o ct69000.o dataflash.o dc2114x.o ds1722.o \
## lan91c96.o mw_eeprom.o natsemi.o \
## smc91111.o smiLynxEM.o spi_eeprom.o sym53c8xx.o \
##
diff --git a/drivers/at91rm9200_ether.c b/drivers/at91rm9200_ether.c
deleted file mode 100644
index f92008e..0000000
--- a/drivers/at91rm9200_ether.c
+++ /dev/null
@@ -1,251 +0,0 @@
-
-#include <common.h>
-#include <command.h>
-#include <asm/io.h>
-#include <net.h>
-
-/* ----- Ethernet Buffer definitions ----- */
-
-typedef struct {
- unsigned long addr,size;
-} rbf_t;
-
-#define RBF_ADDR 0xfffffffc
-#define RBF_OWNER (1<<0)
-#define RBF_WRAP (1<<1)
-#define RBF_BROADCAST (1<<31)
-#define RBF_MULTICAST (1<<30)
-#define RBF_UNICAST (1<<29)
-#define RBF_EXTERNAL (1<<28)
-#define RBF_UNKOWN (1<<27)
-#define RBF_SIZE 0x07ff
-#define RBF_LOCAL4 (1<<26)
-#define RBF_LOCAL3 (1<<25)
-#define RBF_LOCAL2 (1<<24)
-#define RBF_LOCAL1 (1<<23)
-
-#define RBF_FRAMEMAX 10
-#define RBF_FRAMEMEM 0x200000
-#define RBF_FRAMELEN 0x600
-
-#define RBF_FRAMEBTD RBF_FRAMEMEM
-#define RBF_FRAMEBUF (RBF_FRAMEMEM + RBF_FRAMEMAX*sizeof(rbf_t))
-
-/* stolen from mii.h */
-/* Generic MII registers. */
-
-#define MII_BMCR 0x00 /* Basic mode control register */
-#define MII_BMSR 0x01 /* Basic mode status register */
-#define BMSR_JCD 0x0002 /* Jabber detected */
-#define BMSR_LSTATUS 0x0004 /* Link status */
-#define BMSR_10HALF 0x0800 /* Can do 10mbps, half-duplex */
-#define BMSR_100FULL 0x4000 /* Can do 100mbps, full-duplex */
-#define BMSR_10FULL 0x1000 /* Can do 10mbps, full-duplex */
-#define BMSR_100HALF 0x2000 /* Can do 100mbps, half-duplex */
-
-#define MII_STS2_REG 17 /* Davicom specific */
-#define MII_MDINTR_REG 21 /* Davicom specific */
-
-#ifdef CONFIG_DRIVER_ETHER
-
-#if (CONFIG_COMMANDS & CFG_CMD_NET)
-
-AT91PS_EMAC p_mac;
-
-int MII_ReadPhy(unsigned char addr, unsigned short *ret)
- {
-
- p_mac->EMAC_MAN = 0x60020000 | (addr << 18);
- udelay(10000);
- *ret = (unsigned short)p_mac->EMAC_MAN;
- return 1;
- }
-
-
-int MII_GetLinkSpeed(void)
- {
- unsigned short stat1, stat2;
- int ret;
-
- if (!(ret = MII_ReadPhy(MII_BMSR, &stat1)))
- return 0;
-
- if (stat1 & BMSR_JCD)
- {
-#ifdef DEBUG
- printf("MII: jabber condition detected\n");
-#endif /*jabber detected re-read the register*/
- }
- if (!(ret = MII_ReadPhy(MII_BMSR, &stat1)))
- return 0;
- if (!(stat1 & BMSR_LSTATUS)) /* link status up? */
- {
- printf("MII: no Link\n");
- return 0;
- }
-
- if (!(ret = MII_ReadPhy(MII_STS2_REG, &stat2)))
- return 0;
-
- if ((stat1 & BMSR_100FULL) && (stat2 & 0x8000) )
- {
- /* set MII for 100BaseTX and Full Duplex */
- p_mac->EMAC_CFG |= AT91C_EMAC_SPD | AT91C_EMAC_FD;
-#ifdef DEBUG
- printf("MII: 100BaseTX and Full Duplex detected\n");
-#endif
- return 1;
- }
-
- else
- if ((stat1 & BMSR_10FULL) && (stat2 & 0x2000))
- {
- /* set MII for 10BaseT and Full Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG & ~(AT91C_EMAC_SPD | AT91C_EMAC_FD));
-#ifdef DEBUG
- printf("MII: 10BaseT and Full Duplex detected\n");
-#endif
- return 1;
- }
- else
- if ((stat1 & BMSR_100HALF) && (stat2 & 0x4000))
- {
- /* set MII for 100BaseTX and Half Duplex */
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG & ~(AT91C_EMAC_SPD | AT91C_EMAC_FD));
-#ifdef DEBUG
- printf("MII: 100BaseTX and Hall Duplex detected\n");
-#endif
- return 1;
- }
- else
- if ((stat1 & BMSR_10HALF) && (stat2 & 0x1000))
- {
- /*set MII for 10BaseT and Half Duplex */
- p_mac->EMAC_CFG &= ~(AT91C_EMAC_SPD | AT91C_EMAC_FD);
-#ifdef DEBUG
- printf("MII: 10BaseT and Hall Duplex detected\n");
-#endif
- return 1;
- }
-
- return 0;
- }
-
-
-int MDIO_StartupPhy(void)
- {
- int ret;
-
- if(p_mac->EMAC_SR & AT91C_EMAC_LINK)
- {
- printf("MDIO_StartupPhy: no link\n");
- return 0;
- };
-
- p_mac->EMAC_CTL |= AT91C_EMAC_MPE;
-
- ret = MII_GetLinkSpeed();
- if (ret == 0)
- {
- printf("MDIO_StartupPhy: MII_GetLinkSpeed failed\n");
- ret = 0;
- }
- else
- {
- ret = 1;
- }
-
- p_mac->EMAC_CTL &= ~AT91C_EMAC_MPE;
- return ret;
-
- }
-
-
-rbf_t* rbfdt;
-rbf_t* rbfp;
-
-int eth_init( bd_t *bd )
- {
- int ret;
- int i;
- p_mac = AT91C_BASE_EMAC;
-
- *AT91C_PIOA_PDR = AT91C_PA16_EMDIO |
- AT91C_PA15_EMDC | AT91C_PA14_ERXER | AT91C_PA13_ERX1 | AT91C_PA12_ERX0 |
- AT91C_PA11_ECRS_ECRSDV | AT91C_PA10_ETX1 | AT91C_PA9_ETX0 | AT91C_PA8_ETXEN |
- AT91C_PA7_ETXCK_EREFCK; /* PIO Disable Register */
-
- *AT91C_PIOB_PDR = AT91C_PB25_EF100 |
- AT91C_PB19_ERXCK | AT91C_PB18_ECOL | AT91C_PB17_ERXDV | AT91C_PB16_ERX3 |
- AT91C_PB15_ERX2 | AT91C_PB14_ETXER | AT91C_PB13_ETX3 | AT91C_PB12_ETX2;
-
- *AT91C_PIOB_BSR = AT91C_PB25_EF100 |
- AT91C_PB19_ERXCK | AT91C_PB18_ECOL | AT91C_PB17_ERXDV | AT91C_PB16_ERX3 |
- AT91C_PB15_ERX2 | AT91C_PB14_ETXER | AT91C_PB13_ETX3 | AT91C_PB12_ETX2; /* Select B Register */
- *AT91C_PMC_PCER = 1 << AT91C_ID_EMAC; /* Peripheral Clock Enable Register */
- p_mac->EMAC_CFG |= AT91C_EMAC_CSR; /* Clear statistics */
-
- rbfdt=(rbf_t *)RBF_FRAMEBTD;
- for(i = 0; i < RBF_FRAMEMAX; i++)
- {
- rbfdt[i].addr=RBF_FRAMEBUF+RBF_FRAMELEN*i;
- rbfdt[i].size=0;
- }
- rbfdt[RBF_FRAMEMAX-1].addr|=RBF_WRAP;
- rbfp=&rbfdt[0];
-
- if (!(ret = MDIO_StartupPhy()))
- {
- printf("MAC: error during MII initialization\n");
- return 0;
- }
-
- p_mac->EMAC_SA2L = (bd->bi_enetaddr[3] << 24) | (bd->bi_enetaddr[2] << 16)
- | (bd->bi_enetaddr[1] << 8) | (bd->bi_enetaddr[0]);
- p_mac->EMAC_SA2H = (bd->bi_enetaddr[5] << 8) | (bd->bi_enetaddr[4]);
-
- p_mac->EMAC_RBQP = (long)(&rbfdt[0]);
- p_mac->EMAC_RSR &= ~(AT91C_EMAC_RSR_OVR | AT91C_EMAC_REC | AT91C_EMAC_BNA);
- p_mac->EMAC_CFG = (p_mac->EMAC_CFG | AT91C_EMAC_CAF | AT91C_EMAC_NBC | AT91C_EMAC_RMII) & ~AT91C_EMAC_CLK;
- p_mac->EMAC_CTL |= AT91C_EMAC_TE | AT91C_EMAC_RE ;
-
- return 0;
- }
-
-int eth_send(volatile void *packet, int length)
- {
- while(!(p_mac->EMAC_TSR & AT91C_EMAC_BNQ))
- ;
- p_mac->EMAC_TAR = (long)packet;
- p_mac->EMAC_TCR = length;
- while(p_mac->EMAC_TCR & 0x7ff)
- ;
- p_mac->EMAC_TSR |= AT91C_EMAC_COMP;
- return 0;
- }
-
-int eth_rx(void)
- {
- int size;
-
- if(!(rbfp->addr & RBF_OWNER))
- return 0;
-
- size=rbfp->size & RBF_SIZE;
- NetReceive((volatile uchar *) (rbfp->addr & RBF_ADDR), size);
-
- rbfp->addr &= ~RBF_OWNER;
- if(rbfp->addr & RBF_WRAP)
- rbfp = &rbfdt[0];
- else
- rbfp++;
-
- p_mac->EMAC_RSR |= AT91C_EMAC_REC;
-
- return size;
- }
-
-void eth_halt( void )
- {};
-#endif
-#endif
diff --git a/drivers/dataflash.c b/drivers/dataflash.c
new file mode 100644
index 0000000..a0a4b62
--- /dev/null
+++ b/drivers/dataflash.c
@@ -0,0 +1,245 @@
+/* LowLevel function for ATMEL DataFlash support
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <config.h>
+#ifdef CONFIG_HAS_DATAFLASH
+#include <asm/hardware.h>
+#include <dataflash.h>
+
+AT91S_DATAFLASH_INFO dataflash_info[CFG_MAX_DATAFLASH_BANKS];
+static AT91S_DataFlash DataFlashInst;
+
+int cs[][CFG_MAX_DATAFLASH_BANKS] = {
+ {CFG_DATAFLASH_LOGIC_ADDR_CS0, 0}, /* Logical adress, CS */
+ {CFG_DATAFLASH_LOGIC_ADDR_CS3, 3}
+};
+
+extern void AT91F_SpiInit (void);
+extern int AT91F_DataflashProbe (int i, AT91PS_DataflashDesc pDesc);
+extern int AT91F_DataFlashRead (AT91PS_DataFlash pDataFlash,
+ unsigned long addr,
+ unsigned long size, char *buffer);
+
+
+int AT91F_DataflashInit (void)
+{
+ int i, j;
+ int dfcode;
+
+ AT91F_SpiInit ();
+
+ for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+
+ dataflash_info[i].id = 0;
+ dataflash_info[i].Device.pages_number = 0;
+ dfcode = AT91F_DataflashProbe (cs[i][1], &dataflash_info[i].Desc);
+
+ switch (dfcode) {
+ case AT45DB161:
+ dataflash_info[i].Device.pages_number = 4096;
+ dataflash_info[i].Device.pages_size = 528;
+ dataflash_info[i].Device.page_offset = 10;
+ dataflash_info[i].Device.byte_mask = 0x300;
+ dataflash_info[i].Device.cs = cs[i][1];
+ dataflash_info[i].Desc.DataFlash_state = IDLE;
+ dataflash_info[i].logical_address = cs[i][0];
+ dataflash_info[i].id = dfcode;
+ break;
+
+ case AT45DB321:
+ dataflash_info[i].Device.pages_number = 8192;
+ dataflash_info[i].Device.pages_size = 528;
+ dataflash_info[i].Device.page_offset = 10;
+ dataflash_info[i].Device.byte_mask = 0x300;
+ dataflash_info[i].Device.cs = cs[i][1];
+ dataflash_info[i].Desc.DataFlash_state = IDLE;
+ dataflash_info[i].logical_address = cs[i][0];
+ dataflash_info[i].id = dfcode;
+ break;
+
+ case AT45DB642:
+ dataflash_info[i].Device.pages_number = 8192;
+ dataflash_info[i].Device.pages_size = 1056;
+ dataflash_info[i].Device.page_offset = 11;
+ dataflash_info[i].Device.byte_mask = 0x700;
+ dataflash_info[i].Device.cs = cs[i][1];
+ dataflash_info[i].Desc.DataFlash_state = IDLE;
+ dataflash_info[i].logical_address = cs[i][0];
+ dataflash_info[i].id = dfcode;
+ break;
+
+ default:
+ break;
+ }
+
+ for (j = 0; j < dataflash_info[i].Device.pages_number; j++)
+ dataflash_info[i].protect[j] = FLAG_PROTECT_SET;
+
+ }
+ return (1);
+}
+
+
+
+void dataflash_print_info (void)
+{
+ int i;
+
+ for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+ if (dataflash_info[i].id != 0) {
+ printf ("DataFlash:");
+ switch (dataflash_info[i].id) {
+ case AT45DB161:
+ printf ("AT45DB161\n");
+ break;
+
+ case AT45DB321:
+ printf ("AT45DB321\n");
+ break;
+
+ case AT45DB642:
+ printf ("AT45DB642\n");
+ break;
+ }
+
+ printf ("Nb pages: %6d\n"
+ "Page Size: %6d\n"
+ "Size=%8d bytes\n"
+ "Logical address: 0x%08X\n",
+ (unsigned int) dataflash_info[i].Device.pages_number,
+ (unsigned int) dataflash_info[i].Device.pages_size,
+ (unsigned int) dataflash_info[i].Device.pages_number *
+ dataflash_info[i].Device.pages_size,
+ (unsigned int) dataflash_info[i].logical_address);
+ }
+ }
+}
+
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : AT91F_DataflashSelect */
+/* Object : Select the correct device */
+/*------------------------------------------------------------------------------*/
+AT91PS_DataFlash AT91F_DataflashSelect (AT91PS_DataFlash pFlash,
+ unsigned int *addr)
+{
+ char addr_valid = 0;
+ int i;
+
+ for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++)
+ if ((*addr & 0xFF000000) == dataflash_info[i].logical_address) {
+ addr_valid = 1;
+ break;
+ }
+ if (!addr_valid) {
+ pFlash = (AT91PS_DataFlash) 0;
+ return pFlash;
+ }
+ pFlash->pDataFlashDesc = &(dataflash_info[i].Desc);
+ pFlash->pDevice = &(dataflash_info[i].Device);
+ *addr -= dataflash_info[i].logical_address;
+ return (pFlash);
+}
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : addr_dataflash */
+/* Object : Test if address is valid */
+/*------------------------------------------------------------------------------*/
+int addr_dataflash (unsigned long addr)
+{
+ int addr_valid = 0;
+ int i;
+
+ for (i = 0; i < CFG_MAX_DATAFLASH_BANKS; i++) {
+ if ((((int) addr) & 0xFF000000) ==
+ dataflash_info[i].logical_address) {
+ addr_valid = 1;
+ break;
+ }
+ }
+
+ return addr_valid;
+}
+
+/*------------------------------------------------------------------------------*/
+/* Function Name : read_dataflash */
+/* Object : dataflash memory read */
+/*------------------------------------------------------------------------------*/
+int read_dataflash (unsigned long addr, unsigned long size, char *result)
+{
+ int AddrToRead = addr;
+ AT91PS_DataFlash pFlash = &DataFlashInst;
+
+ pFlash = AT91F_DataflashSelect (pFlash, &AddrToRead);
+ if (pFlash == 0)
+ return -1;
+
+ return (AT91F_DataFlashRead (pFlash, AddrToRead, size, result));
+}
+
+
+/*-----------------------------------------------------------------------------*/
+/* Function Name : write_dataflash */
+/* Object : write a block in dataflash */
+/*-----------------------------------------------------------------------------*/
+int write_dataflash (unsigned long addr_dest, unsigned long addr_src,
+ unsigned long size)
+{
+ extern AT91S_DataFlashStatus AT91F_DataFlashWrite(
+ AT91PS_DataFlash, uchar *, int, int);
+ int AddrToWrite = addr_dest;
+ AT91PS_DataFlash pFlash = &DataFlashInst;
+
+ pFlash = AT91F_DataflashSelect (pFlash, &AddrToWrite);
+ if (AddrToWrite == -1)
+ return -1;
+
+ return AT91F_DataFlashWrite (pFlash, (char *) addr_src, AddrToWrite,
+ size);
+}
+
+
+void dataflash_perror (int err)
+{
+ switch (err) {
+ case ERR_OK:
+ break;
+ case ERR_TIMOUT:
+ printf ("Timeout writing to DataFlash\n");
+ break;
+ case ERR_PROTECTED:
+ printf ("Can't write to protected DataFlash sectors\n");
+ break;
+ case ERR_INVAL:
+ printf ("Outside available DataFlash\n");
+ break;
+ case ERR_UNKNOWN_FLASH_TYPE:
+ printf ("Unknown Type of DataFlash\n");
+ break;
+ case ERR_PROG_ERROR:
+ printf ("General DataFlash Programming Error\n");
+ break;
+ default:
+ printf ("%s[%d] FIXME: rc=%d\n", __FILE__, __LINE__, err);
+ break;
+ }
+}
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/AT91RM9200.h b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
index 8f93c12..c0e5211 100644
--- a/include/asm-arm/arch-at91rm9200/AT91RM9200.h
+++ b/include/asm-arm/arch-at91rm9200/AT91RM9200.h
@@ -1,15 +1,27 @@
-/* ---------------------------------------------------------------------------- */
-/* ATMEL Microcontroller Software Support - ROUSSET - */
-/* ---------------------------------------------------------------------------- */
-/* The software is delivered "AS IS" without warranty or condition of any */
-/* kind, either express, implied or statutory. This includes without */
-/* limitation any warranty or condition with respect to merchantability or */
-/* fitness for any particular purpose, or against the infringements of */
-/* intellectual property rights of others. */
-/* ---------------------------------------------------------------------------- */
-/* File Name : AT91RM9200.h */
-/* Object : AT91RM9200 definitions */
-/* Generated : AT91 SW Application Group 10/29/2002 (16:10:51) */
+/*
+ * (C) Copyright 2003
+ * AT91RM9200 definitions
+ * Author : ATMEL AT91 application group
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
#ifndef AT91RM9200_H
#define AT91RM9200_H
@@ -32,6 +44,21 @@
AT91_REG TC_IMR; /* Interrupt Mask Register */
} AT91S_TC, *AT91PS_TC;
+#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */
+#define AT91C_TC_TIMER_DIV2_CLOCK ((unsigned int) 0x1 << 0) /* (TC) MCK/8 */
+#define AT91C_TC_TIMER_DIV3_CLOCK ((unsigned int) 0x2 << 0) /* (TC) MCK/32 */
+#define AT91C_TC_TIMER_DIV4_CLOCK ((unsigned int) 0x3 << 0) /* (TC) MCK/128 */
+#define AT91C_TC_SLOW_CLOCK ((unsigned int) 0x4 << 0) /* (TC) SLOW CLK */
+#define AT91C_TC_XC0_CLOCK ((unsigned int) 0x5 << 0) /* (TC) XC0 */
+#define AT91C_TC_XC1_CLOCK ((unsigned int) 0x6 << 0) /* (TC) XC1 */
+#define AT91C_TC_XC2_CLOCK ((unsigned int) 0x7 << 0) /* (TC) XC2 */
+#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) /* (TCB) None signal connected to XC0 */
+#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) /* (TCB) None signal connected to XC1 */
+#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) /* (TCB) None signal connected to XC2 */
+#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) /* (TC) Counter Clock Disable Command */
+#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) /* (TC) Software Trigger Command */
+#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) /* (TC) Counter Clock Enable Command */
+
/* ***************************************************************************** */
/* SOFTWARE API DEFINITION FOR Usart */
/* ***************************************************************************** */
@@ -137,6 +164,32 @@
AT91_REG DBGU_PTSR; /* PDC Transfer Status Register */
} AT91S_DBGU, *AT91PS_DBGU;
+/* -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- */
+#define AT91C_US_RXRDY ((unsigned int) 0x1 << 0) /* (DBGU) RXRDY Interrupt */
+#define AT91C_US_TXRDY ((unsigned int) 0x1 << 1) /* (DBGU) TXRDY Interrupt */
+#define AT91C_US_ENDRX ((unsigned int) 0x1 << 3) /* (DBGU) End of Receive Transfer Interrupt */
+#define AT91C_US_ENDTX ((unsigned int) 0x1 << 4) /* (DBGU) End of Transmit Interrupt */
+#define AT91C_US_OVRE ((unsigned int) 0x1 << 5) /* (DBGU) Overrun Interrupt */
+#define AT91C_US_FRAME ((unsigned int) 0x1 << 6) /* (DBGU) Framing Error Interrupt */
+#define AT91C_US_PARE ((unsigned int) 0x1 << 7) /* (DBGU) Parity Error Interrupt */
+#define AT91C_US_TXEMPTY ((unsigned int) 0x1 << 9) /* (DBGU) TXEMPTY Interrupt */
+#define AT91C_US_TXBUFE ((unsigned int) 0x1 << 11) /* (DBGU) TXBUFE Interrupt */
+#define AT91C_US_RXBUFF ((unsigned int) 0x1 << 12) /* (DBGU) RXBUFF Interrupt */
+#define AT91C_US_COMM_TX ((unsigned int) 0x1 << 30) /* (DBGU) COMM_TX Interrupt */
+#define AT91C_US_COMM_RX ((unsigned int) 0x1 << 31) /* (DBGU) COMM_RX Interrupt */
+
+/* -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- */
+#define AT91C_US_RSTRX ((unsigned int) 0x1 << 2) /* (DBGU) Reset Receiver */
+#define AT91C_US_RSTTX ((unsigned int) 0x1 << 3) /* (DBGU) Reset Transmitter */
+#define AT91C_US_RXEN ((unsigned int) 0x1 << 4) /* (DBGU) Receiver Enable */
+#define AT91C_US_RXDIS ((unsigned int) 0x1 << 5) /* (DBGU) Receiver Disable */
+#define AT91C_US_TXEN ((unsigned int) 0x1 << 6) /* (DBGU) Transmitter Enable */
+#define AT91C_US_TXDIS ((unsigned int) 0x1 << 7) /* (DBGU) Transmitter Disable */
+
+#define AT91C_US_CLKS_CLOCK ((unsigned int) 0x0 << 4) /* (USART) Clock */
+#define AT91C_US_CHRL_8_BITS ((unsigned int) 0x3 << 6) /* (USART) Character Length: 8 bits */
+#define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) /* (DBGU) No Parity */
+#define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) /* (USART) 1 stop bit */
/* ***************************************************************************** */
/* SOFTWARE API DEFINITION FOR Static Memory Controller 2 Interface */
@@ -146,6 +199,28 @@
} AT91S_SMC2, *AT91PS_SMC2;
/* ***************************************************************************** */
+/* SOFTWARE API DEFINITION FOR Power Management Controler */
+/* ******************************************************************************/
+typedef struct _AT91S_PMC {
+ AT91_REG PMC_SCER; /* System Clock Enable Register */
+ AT91_REG PMC_SCDR; /* System Clock Disable Register */
+ AT91_REG PMC_SCSR; /* System Clock Status Register */
+ AT91_REG Reserved0[1]; /* */
+ AT91_REG PMC_PCER; /* Peripheral Clock Enable Register */
+ AT91_REG PMC_PCDR; /* Peripheral Clock Disable Register */
+ AT91_REG PMC_PCSR; /* Peripheral Clock Status Register */
+ AT91_REG Reserved1[5]; /* */
+ AT91_REG PMC_MCKR; /* Master Clock Register */
+ AT91_REG Reserved2[3]; /* */
+ AT91_REG PMC_PCKR[8]; /* Programmable Clock Register */
+ AT91_REG PMC_IER; /* Interrupt Enable Register */
+ AT91_REG PMC_IDR; /* Interrupt Disable Register */
+ AT91_REG PMC_SR; /* Status Register */
+ AT91_REG PMC_IMR; /* Interrupt Mask Register */
+} AT91S_PMC, *AT91PS_PMC;
+
+
+/* ***************************************************************************** */
/* SOFTWARE API DEFINITION FOR Ethernet MAC */
/* ***************************************************************************** */
typedef struct _AT91S_EMAC {
@@ -194,35 +269,185 @@
AT91_REG EMAC_SA4H; /* Specific Address 4 High, Last 2 bytesr */
} AT91S_EMAC, *AT91PS_EMAC;
-/* -------- DBGU_IER : (DBGU Offset: 0x8) Debug Unit Interrupt Enable Register -------- */
-#define AT91C_US_RXRDY ((unsigned int) 0x1 << 0) /* (DBGU) RXRDY Interrupt */
-#define AT91C_US_TXRDY ((unsigned int) 0x1 << 1) /* (DBGU) TXRDY Interrupt */
-#define AT91C_US_ENDRX ((unsigned int) 0x1 << 3) /* (DBGU) End of Receive Transfer Interrupt */
-#define AT91C_US_ENDTX ((unsigned int) 0x1 << 4) /* (DBGU) End of Transmit Interrupt */
-#define AT91C_US_OVRE ((unsigned int) 0x1 << 5) /* (DBGU) Overrun Interrupt */
-#define AT91C_US_FRAME ((unsigned int) 0x1 << 6) /* (DBGU) Framing Error Interrupt */
-#define AT91C_US_PARE ((unsigned int) 0x1 << 7) /* (DBGU) Parity Error Interrupt */
-#define AT91C_US_TXEMPTY ((unsigned int) 0x1 << 9) /* (DBGU) TXEMPTY Interrupt */
-#define AT91C_US_TXBUFE ((unsigned int) 0x1 << 11) /* (DBGU) TXBUFE Interrupt */
-#define AT91C_US_RXBUFF ((unsigned int) 0x1 << 12) /* (DBGU) RXBUFF Interrupt */
-#define AT91C_US_COMM_TX ((unsigned int) 0x1 << 30) /* (DBGU) COMM_TX Interrupt */
-#define AT91C_US_COMM_RX ((unsigned int) 0x1 << 31) /* (DBGU) COMM_RX Interrupt */
+/* -------- EMAC_CTL : (EMAC Offset: 0x0) -------- */
+#define AT91C_EMAC_LB ((unsigned int) 0x1 << 0) /* (EMAC) Loopback. Optional. When set, loopback signal is at high level. */
+#define AT91C_EMAC_LBL ((unsigned int) 0x1 << 1) /* (EMAC) Loopback local. */
+#define AT91C_EMAC_RE ((unsigned int) 0x1 << 2) /* (EMAC) Receive enable. */
+#define AT91C_EMAC_TE ((unsigned int) 0x1 << 3) /* (EMAC) Transmit enable. */
+#define AT91C_EMAC_MPE ((unsigned int) 0x1 << 4) /* (EMAC) Management port enable. */
+#define AT91C_EMAC_CSR ((unsigned int) 0x1 << 5) /* (EMAC) Clear statistics registers. */
+#define AT91C_EMAC_ISR ((unsigned int) 0x1 << 6) /* (EMAC) Increment statistics registers. */
+#define AT91C_EMAC_WES ((unsigned int) 0x1 << 7) /* (EMAC) Write enable for statistics registers. */
+#define AT91C_EMAC_BP ((unsigned int) 0x1 << 8) /* (EMAC) Back pressure. */
+/* -------- EMAC_CFG : (EMAC Offset: 0x4) Network Configuration Register -------- */
+#define AT91C_EMAC_SPD ((unsigned int) 0x1 << 0) /* (EMAC) Speed. */
+#define AT91C_EMAC_FD ((unsigned int) 0x1 << 1) /* (EMAC) Full duplex. */
+#define AT91C_EMAC_BR ((unsigned int) 0x1 << 2) /* (EMAC) Bit rate. */
+#define AT91C_EMAC_CAF ((unsigned int) 0x1 << 4) /* (EMAC) Copy all frames. */
+#define AT91C_EMAC_NBC ((unsigned int) 0x1 << 5) /* (EMAC) No broadcast. */
+#define AT91C_EMAC_MTI ((unsigned int) 0x1 << 6) /* (EMAC) Multicast hash enable */
+#define AT91C_EMAC_UNI ((unsigned int) 0x1 << 7) /* (EMAC) Unicast hash enable. */
+#define AT91C_EMAC_BIG ((unsigned int) 0x1 << 8) /* (EMAC) Receive 1522 bytes. */
+#define AT91C_EMAC_EAE ((unsigned int) 0x1 << 9) /* (EMAC) External address match enable. */
+#define AT91C_EMAC_CLK ((unsigned int) 0x3 << 10) /* (EMAC) */
+#define AT91C_EMAC_CLK_HCLK_8 ((unsigned int) 0x0 << 10) /* (EMAC) HCLK divided by 8 */
+#define AT91C_EMAC_CLK_HCLK_16 ((unsigned int) 0x1 << 10) /* (EMAC) HCLK divided by 16 */
+#define AT91C_EMAC_CLK_HCLK_32 ((unsigned int) 0x2 << 10) /* (EMAC) HCLK divided by 32 */
+#define AT91C_EMAC_CLK_HCLK_64 ((unsigned int) 0x3 << 10) /* (EMAC) HCLK divided by 64 */
+#define AT91C_EMAC_RTY ((unsigned int) 0x1 << 12) /* (EMAC) */
+#define AT91C_EMAC_RMII ((unsigned int) 0x1 << 13) /* (EMAC) */
+/* -------- EMAC_SR : (EMAC Offset: 0x8) Network Status Register -------- */
+#define AT91C_EMAC_MDIO ((unsigned int) 0x1 << 1) /* (EMAC) */
+#define AT91C_EMAC_IDLE ((unsigned int) 0x1 << 2) /* (EMAC) */
+/* -------- EMAC_TCR : (EMAC Offset: 0x10) Transmit Control Register -------- */
+#define AT91C_EMAC_LEN ((unsigned int) 0x7FF << 0) /* (EMAC) */
+#define AT91C_EMAC_NCRC ((unsigned int) 0x1 << 15) /* (EMAC) */
+/* -------- EMAC_TSR : (EMAC Offset: 0x14) Transmit Control Register -------- */
+#define AT91C_EMAC_OVR ((unsigned int) 0x1 << 0) /* (EMAC) */
+#define AT91C_EMAC_COL ((unsigned int) 0x1 << 1) /* (EMAC) */
+#define AT91C_EMAC_RLE ((unsigned int) 0x1 << 2) /* (EMAC) */
+#define AT91C_EMAC_TXIDLE ((unsigned int) 0x1 << 3) /* (EMAC) */
+#define AT91C_EMAC_BNQ ((unsigned int) 0x1 << 4) /* (EMAC) */
+#define AT91C_EMAC_COMP ((unsigned int) 0x1 << 5) /* (EMAC) */
+#define AT91C_EMAC_UND ((unsigned int) 0x1 << 6) /* (EMAC) */
+/* -------- EMAC_RSR : (EMAC Offset: 0x20) Receive Status Register -------- */
+#define AT91C_EMAC_BNA ((unsigned int) 0x1 << 0) /* (EMAC) */
+#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) /* (EMAC) */
+#define AT91C_EMAC_RSR_OVR ((unsigned int) 0x1 << 2) /* (EMAC) */
+/* -------- EMAC_ISR : (EMAC Offset: 0x24) Interrupt Status Register -------- */
+#define AT91C_EMAC_DONE ((unsigned int) 0x1 << 0) /* (EMAC) */
+#define AT91C_EMAC_RCOM ((unsigned int) 0x1 << 1) /* (EMAC) */
+#define AT91C_EMAC_RBNA ((unsigned int) 0x1 << 2) /* (EMAC) */
+#define AT91C_EMAC_TOVR ((unsigned int) 0x1 << 3) /* (EMAC) */
+#define AT91C_EMAC_TUND ((unsigned int) 0x1 << 4) /* (EMAC) */
+#define AT91C_EMAC_RTRY ((unsigned int) 0x1 << 5) /* (EMAC) */
+#define AT91C_EMAC_TBRE ((unsigned int) 0x1 << 6) /* (EMAC) */
+#define AT91C_EMAC_TCOM ((unsigned int) 0x1 << 7) /* (EMAC) */
+#define AT91C_EMAC_TIDLE ((unsigned int) 0x1 << 8) /* (EMAC) */
+#define AT91C_EMAC_LINK ((unsigned int) 0x1 << 9) /* (EMAC) */
+#define AT91C_EMAC_ROVR ((unsigned int) 0x1 << 10) /* (EMAC) */
+#define AT91C_EMAC_HRESP ((unsigned int) 0x1 << 11) /* (EMAC) */
+/* -------- EMAC_IER : (EMAC Offset: 0x28) Interrupt Enable Register -------- */
+/* -------- EMAC_IDR : (EMAC Offset: 0x2c) Interrupt Disable Register -------- */
+/* -------- EMAC_IMR : (EMAC Offset: 0x30) Interrupt Mask Register -------- */
+/* -------- EMAC_MAN : (EMAC Offset: 0x34) PHY Maintenance Register -------- */
+#define AT91C_EMAC_DATA ((unsigned int) 0xFFFF << 0) /* (EMAC) */
+#define AT91C_EMAC_CODE ((unsigned int) 0x3 << 16) /* (EMAC) */
+#define AT91C_EMAC_CODE_802_3 ((unsigned int) 0x2 << 16) /* (EMAC) Write Operation */
+#define AT91C_EMAC_REGA ((unsigned int) 0x1F << 18) /* (EMAC) */
+#define AT91C_EMAC_PHYA ((unsigned int) 0x1F << 23) /* (EMAC) */
+#define AT91C_EMAC_RW ((unsigned int) 0x3 << 28) /* (EMAC) */
+#define AT91C_EMAC_RW_R ((unsigned int) 0x2 << 28) /* (EMAC) Read Operation */
+#define AT91C_EMAC_RW_W ((unsigned int) 0x1 << 28) /* (EMAC) Write Operation */
+#define AT91C_EMAC_HIGH ((unsigned int) 0x1 << 30) /* (EMAC) */
+#define AT91C_EMAC_LOW ((unsigned int) 0x1 << 31) /* (EMAC) */
-/* -------- DBGU_CR : (DBGU Offset: 0x0) Debug Unit Control Register -------- */
-#define AT91C_US_RSTRX ((unsigned int) 0x1 << 2) /* (DBGU) Reset Receiver */
-#define AT91C_US_RSTTX ((unsigned int) 0x1 << 3) /* (DBGU) Reset Transmitter */
-#define AT91C_US_RXEN ((unsigned int) 0x1 << 4) /* (DBGU) Receiver Enable */
-#define AT91C_US_RXDIS ((unsigned int) 0x1 << 5) /* (DBGU) Receiver Disable */
-#define AT91C_US_TXEN ((unsigned int) 0x1 << 6) /* (DBGU) Transmitter Enable */
-#define AT91C_US_TXDIS ((unsigned int) 0x1 << 7) /* (DBGU) Transmitter Disable */
+/* ***************************************************************************** */
+/* SOFTWARE API DEFINITION FOR Serial Parallel Interface */
+/* ***************************************************************************** */
+typedef struct _AT91S_SPI {
+ AT91_REG SPI_CR; /* Control Register */
+ AT91_REG SPI_MR; /* Mode Register */
+ AT91_REG SPI_RDR; /* Receive Data Register */
+ AT91_REG SPI_TDR; /* Transmit Data Register */
+ AT91_REG SPI_SR; /* Status Register */
+ AT91_REG SPI_IER; /* Interrupt Enable Register */
+ AT91_REG SPI_IDR; /* Interrupt Disable Register */
+ AT91_REG SPI_IMR; /* Interrupt Mask Register */
+ AT91_REG Reserved0[4]; /* */
+ AT91_REG SPI_CSR[4]; /* Chip Select Register */
+ AT91_REG Reserved1[48]; /* */
+ AT91_REG SPI_RPR; /* Receive Pointer Register */
+ AT91_REG SPI_RCR; /* Receive Counter Register */
+ AT91_REG SPI_TPR; /* Transmit Pointer Register */
+ AT91_REG SPI_TCR; /* Transmit Counter Register */
+ AT91_REG SPI_RNPR; /* Receive Next Pointer Register */
+ AT91_REG SPI_RNCR; /* Receive Next Counter Register */
+ AT91_REG SPI_TNPR; /* Transmit Next Pointer Register */
+ AT91_REG SPI_TNCR; /* Transmit Next Counter Register */
+ AT91_REG SPI_PTCR; /* PDC Transfer Control Register */
+ AT91_REG SPI_PTSR; /* PDC Transfer Status Register */
+} AT91S_SPI, *AT91PS_SPI;
-#define AT91C_US_CLKS_CLOCK ((unsigned int) 0x0 << 4) /* (USART) Clock */
-#define AT91C_US_CHRL_8_BITS ((unsigned int) 0x3 << 6) /* (USART) Character Length: 8 bits */
-#define AT91C_US_PAR_NONE ((unsigned int) 0x4 << 9) /* (DBGU) No Parity */
-#define AT91C_US_NBSTOP_1_BIT ((unsigned int) 0x0 << 12) /* (USART) 1 stop bit */
+/* -------- SPI_CR : (SPI Offset: 0x0) SPI Control Register -------- */
+#define AT91C_SPI_SPIEN ((unsigned int) 0x1 << 0) /* (SPI) SPI Enable */
+#define AT91C_SPI_SPIDIS ((unsigned int) 0x1 << 1) /* (SPI) SPI Disable */
+#define AT91C_SPI_SWRST ((unsigned int) 0x1 << 7) /* (SPI) SPI Software reset */
+/* -------- SPI_MR : (SPI Offset: 0x4) SPI Mode Register -------- */
+#define AT91C_SPI_MSTR ((unsigned int) 0x1 << 0) /* (SPI) Master/Slave Mode */
+#define AT91C_SPI_PS ((unsigned int) 0x1 << 1) /* (SPI) Peripheral Select */
+#define AT91C_SPI_PS_FIXED ((unsigned int) 0x0 << 1) /* (SPI) Fixed Peripheral Select */
+#define AT91C_SPI_PS_VARIABLE ((unsigned int) 0x1 << 1) /* (SPI) Variable Peripheral Select */
+#define AT91C_SPI_PCSDEC ((unsigned int) 0x1 << 2) /* (SPI) Chip Select Decode */
+#define AT91C_SPI_DIV32 ((unsigned int) 0x1 << 3) /* (SPI) Clock Selection */
+#define AT91C_SPI_MODFDIS ((unsigned int) 0x1 << 4) /* (SPI) Mode Fault Detection */
+#define AT91C_SPI_LLB ((unsigned int) 0x1 << 7) /* (SPI) Clock Selection */
+#define AT91C_SPI_PCS ((unsigned int) 0xF << 16) /* (SPI) Peripheral Chip Select */
+#define AT91C_SPI_DLYBCS ((unsigned int) 0xFF << 24) /* (SPI) Delay Between Chip Selects */
+/* -------- SPI_RDR : (SPI Offset: 0x8) Receive Data Register -------- */
+#define AT91C_SPI_RD ((unsigned int) 0xFFFF << 0) /* (SPI) Receive Data */
+#define AT91C_SPI_RPCS ((unsigned int) 0xF << 16) /* (SPI) Peripheral Chip Select Status */
+/* -------- SPI_TDR : (SPI Offset: 0xc) Transmit Data Register -------- */
+#define AT91C_SPI_TD ((unsigned int) 0xFFFF << 0) /* (SPI) Transmit Data */
+#define AT91C_SPI_TPCS ((unsigned int) 0xF << 16) /* (SPI) Peripheral Chip Select Status */
+/* -------- SPI_SR : (SPI Offset: 0x10) Status Register -------- */
+#define AT91C_SPI_RDRF ((unsigned int) 0x1 << 0) /* (SPI) Receive Data Register Full */
+#define AT91C_SPI_TDRE ((unsigned int) 0x1 << 1) /* (SPI) Transmit Data Register Empty */
+#define AT91C_SPI_MODF ((unsigned int) 0x1 << 2) /* (SPI) Mode Fault Error */
+#define AT91C_SPI_OVRES ((unsigned int) 0x1 << 3) /* (SPI) Overrun Error Status */
+#define AT91C_SPI_SPENDRX ((unsigned int) 0x1 << 4) /* (SPI) End of Receiver Transfer */
+#define AT91C_SPI_SPENDTX ((unsigned int) 0x1 << 5) /* (SPI) End of Receiver Transfer */
+#define AT91C_SPI_RXBUFF ((unsigned int) 0x1 << 6) /* (SPI) RXBUFF Interrupt */
+#define AT91C_SPI_TXBUFE ((unsigned int) 0x1 << 7) /* (SPI) TXBUFE Interrupt */
+#define AT91C_SPI_SPIENS ((unsigned int) 0x1 << 16) /* (SPI) Enable Status */
+/* -------- SPI_IER : (SPI Offset: 0x14) Interrupt Enable Register -------- */
+/* -------- SPI_IDR : (SPI Offset: 0x18) Interrupt Disable Register -------- */
+/* -------- SPI_IMR : (SPI Offset: 0x1c) Interrupt Mask Register -------- */
+/* -------- SPI_CSR : (SPI Offset: 0x30) Chip Select Register -------- */
+#define AT91C_SPI_CPOL ((unsigned int) 0x1 << 0) /* (SPI) Clock Polarity */
+#define AT91C_SPI_NCPHA ((unsigned int) 0x1 << 1) /* (SPI) Clock Phase */
+#define AT91C_SPI_BITS ((unsigned int) 0xF << 4) /* (SPI) Bits Per Transfer */
+#define AT91C_SPI_BITS_8 ((unsigned int) 0x0 << 4) /* (SPI) 8 Bits Per transfer */
+#define AT91C_SPI_BITS_9 ((unsigned int) 0x1 << 4) /* (SPI) 9 Bits Per transfer */
+#define AT91C_SPI_BITS_10 ((unsigned int) 0x2 << 4) /* (SPI) 10 Bits Per transfer */
+#define AT91C_SPI_BITS_11 ((unsigned int) 0x3 << 4) /* (SPI) 11 Bits Per transfer */
+#define AT91C_SPI_BITS_12 ((unsigned int) 0x4 << 4) /* (SPI) 12 Bits Per transfer */
+#define AT91C_SPI_BITS_13 ((unsigned int) 0x5 << 4) /* (SPI) 13 Bits Per transfer */
+#define AT91C_SPI_BITS_14 ((unsigned int) 0x6 << 4) /* (SPI) 14 Bits Per transfer */
+#define AT91C_SPI_BITS_15 ((unsigned int) 0x7 << 4) /* (SPI) 15 Bits Per transfer */
+#define AT91C_SPI_BITS_16 ((unsigned int) 0x8 << 4) /* (SPI) 16 Bits Per transfer */
+#define AT91C_SPI_SCBR ((unsigned int) 0xFF << 8) /* (SPI) Serial Clock Baud Rate */
+#define AT91C_SPI_DLYBS ((unsigned int) 0xFF << 16) /* (SPI) Serial Clock Baud Rate */
+#define AT91C_SPI_DLYBCT ((unsigned int) 0xFF << 24) /* (SPI) Delay Between Consecutive Transfers */
+/* ***************************************************************************** */
+/* SOFTWARE API DEFINITION FOR Peripheral Data Controller */
+/* ***************************************************************************** */
+typedef struct _AT91S_PDC {
+ AT91_REG PDC_RPR; /* Receive Pointer Register */
+ AT91_REG PDC_RCR; /* Receive Counter Register */
+ AT91_REG PDC_TPR; /* Transmit Pointer Register */
+ AT91_REG PDC_TCR; /* Transmit Counter Register */
+ AT91_REG PDC_RNPR; /* Receive Next Pointer Register */
+ AT91_REG PDC_RNCR; /* Receive Next Counter Register */
+ AT91_REG PDC_TNPR; /* Transmit Next Pointer Register */
+ AT91_REG PDC_TNCR; /* Transmit Next Counter Register */
+ AT91_REG PDC_PTCR; /* PDC Transfer Control Register */
+ AT91_REG PDC_PTSR; /* PDC Transfer Status Register */
+} AT91S_PDC, *AT91PS_PDC;
+
+/* -------- PDC_PTCR : (PDC Offset: 0x20) PDC Transfer Control Register -------- */
+#define AT91C_PDC_RXTEN ((unsigned int) 0x1 << 0) /* (PDC) Receiver Transfer Enable */
+#define AT91C_PDC_RXTDIS ((unsigned int) 0x1 << 1) /* (PDC) Receiver Transfer Disable */
+#define AT91C_PDC_TXTEN ((unsigned int) 0x1 << 8) /* (PDC) Transmitter Transfer Enable */
+#define AT91C_PDC_TXTDIS ((unsigned int) 0x1 << 9) /* (PDC) Transmitter Transfer Disable */
+/* -------- PDC_PTSR : (PDC Offset: 0x24) PDC Transfer Status Register -------- */
+
+/* ========== Register definition ==================================== */
+#define AT91C_SPI_CSR ((AT91_REG *) 0xFFFE0030) /* (SPI) Chip Select Register */
#define AT91C_PMC_PCER ((AT91_REG *) 0xFFFFFC10) /* (PMC) Peripheral Clock Enable Register */
#define AT91C_PIOA_PDR ((AT91_REG *) 0xFFFFF404) /* (PIOA) PIO Disable Register */
+
#define AT91C_PIO_PA30 ((unsigned int) 1 << 30) /* Pin Controlled by PA30 */
#define AT91C_PIO_PC0 ((unsigned int) 1 << 0) /* Pin Controlled by PC0 */
#define AT91C_PC0_BFCK ((unsigned int) AT91C_PIO_PC0) /* Burst Flash Clock */
@@ -233,6 +458,7 @@
#define AT91C_ID_SYS ((unsigned int) 1) /* System Peripheral */
#define AT91C_ID_TC0 ((unsigned int) 17) /* Timer Counter 0 */
#define AT91C_ID_EMAC ((unsigned int) 24) /* Ethernet MAC */
+#define AT91C_ID_SPI ((unsigned int) 13) /* Serial Peripheral Interface */
#define AT91C_PIO_PC1 ((unsigned int) 1 << 1) /* Pin Controlled by PC1 */
#define AT91C_PC1_BFRDY_SMOE ((unsigned int) AT91C_PIO_PC1) /* Burst Flash Ready */
@@ -242,38 +468,25 @@
#define AT91C_PC2_BFAVD ((unsigned int) AT91C_PIO_PC2) /* Burst Flash Address Valid */
#define AT91C_PIO_PB1 ((unsigned int) 1 << 1) /* Pin Controlled by PB1 */
-#define AT91C_TC_TIMER_DIV1_CLOCK ((unsigned int) 0x0 << 0) /* (TC) MCK/2 */
-#define AT91C_TC_TIMER_DIV2_CLOCK ((unsigned int) 0x1 << 0) /* (TC) MCK/8 */
-#define AT91C_TC_TIMER_DIV3_CLOCK ((unsigned int) 0x2 << 0) /* (TC) MCK/32 */
-#define AT91C_TC_TIMER_DIV4_CLOCK ((unsigned int) 0x3 << 0) /* (TC) MCK/128 */
-#define AT91C_TC_SLOW_CLOCK ((unsigned int) 0x4 << 0) /* (TC) SLOW CLK */
-#define AT91C_TC_XC0_CLOCK ((unsigned int) 0x5 << 0) /* (TC) XC0 */
-#define AT91C_TC_XC1_CLOCK ((unsigned int) 0x6 << 0) /* (TC) XC1 */
-#define AT91C_TC_XC2_CLOCK ((unsigned int) 0x7 << 0) /* (TC) XC2 */
-#define AT91C_TCB_TC0XC0S_NONE ((unsigned int) 0x1) /* (TCB) None signal connected to XC0 */
-#define AT91C_TCB_TC1XC1S_NONE ((unsigned int) 0x1 << 2) /* (TCB) None signal connected to XC1 */
-#define AT91C_TCB_TC2XC2S_NONE ((unsigned int) 0x1 << 4) /* (TCB) None signal connected to XC2 */
-#define AT91C_TC_CLKDIS ((unsigned int) 0x1 << 1) /* (TC) Counter Clock Disable Command */
-#define AT91C_TC_SWTRG ((unsigned int) 0x1 << 2) /* (TC) Software Trigger Command */
-#define AT91C_TC_CLKEN ((unsigned int) 0x1 << 0) /* (TC) Counter Clock Enable Command */
+#define AT91C_PIO_PA23 ((unsigned int) 1 << 23) /* Pin Controlled by PA23 */
+#define AT91C_PA23_TXD2 ((unsigned int) AT91C_PIO_PA23) /* USART 2 Transmit Data */
-#define AT91C_EMAC_BNQ ((unsigned int) 0x1 << 4) /* (EMAC) */
-#define AT91C_EMAC_COMP ((unsigned int) 0x1 << 5) /* (EMAC) */
-#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) /* (EMAC) */
-#define AT91C_EMAC_RE ((unsigned int) 0x1 << 2) /* (EMAC) Receive enable. */
-#define AT91C_EMAC_TE ((unsigned int) 0x1 << 3) /* (EMAC) Transmit enable. */
-#define AT91C_EMAC_CLK ((unsigned int) 0x3 << 10) /* (EMAC) */
-#define AT91C_EMAC_RMII ((unsigned int) 0x1 << 13) /* (EMAC) */
-#define AT91C_EMAC_NBC ((unsigned int) 0x1 << 5) /* (EMAC) No broadcast. */
-#define AT91C_EMAC_CAF ((unsigned int) 0x1 << 4) /* (EMAC) Copy all frames. */
-#define AT91C_EMAC_BNA ((unsigned int) 0x1 << 0) /* (EMAC) */
-#define AT91C_EMAC_REC ((unsigned int) 0x1 << 1) /* (EMAC) */
-#define AT91C_EMAC_RSR_OVR ((unsigned int) 0x1 << 2) /* (EMAC) */
-#define AT91C_EMAC_CSR ((unsigned int) 0x1 << 5) /* (EMAC) Clear statistics registers. */
-#define AT91C_EMAC_SPD ((unsigned int) 0x1 << 0) /* (EMAC) Speed. */
-#define AT91C_EMAC_FD ((unsigned int) 0x1 << 1) /* (EMAC) Full duplex. */
-#define AT91C_EMAC_LINK ((unsigned int) 0x1 << 0) /* (EMAC) */
-#define AT91C_EMAC_MPE ((unsigned int) 0x1 << 4) /* (EMAC) Management port enable. */
+#define AT91C_PIO_PA0 ((unsigned int) 1 << 0) /* Pin Controlled by PA0 */
+#define AT91C_PA0_MISO ((unsigned int) AT91C_PIO_PA0) /* SPI Master In Slave */
+#define AT91C_PIO_PA1 ((unsigned int) 1 << 1) /* Pin Controlled by PA1 */
+#define AT91C_PA1_MOSI ((unsigned int) AT91C_PIO_PA1) /* SPI Master Out Slave */
+#define AT91C_PIO_PA2 ((unsigned int) 1 << 2) /* Pin Controlled by PA2 */
+#define AT91C_PA2_SPCK ((unsigned int) AT91C_PIO_PA2) /* SPI Serial Clock */
+#define AT91C_PIO_PA3 ((unsigned int) 1 << 3) /* Pin Controlled by PA3 */
+#define AT91C_PA3_NPCS0 ((unsigned int) AT91C_PIO_PA3) /* SPI Peripheral Chip Select 0 */
+#define AT91C_PIO_PA4 ((unsigned int) 1 << 4) /* Pin Controlled by PA4 */
+#define AT91C_PA4_NPCS1 ((unsigned int) AT91C_PIO_PA4) /* SPI Peripheral Chip Select 1 */
+#define AT91C_PIO_PA5 ((unsigned int) 1 << 5) /* Pin Controlled by PA5 */
+#define AT91C_PA5_NPCS2 ((unsigned int) AT91C_PIO_PA5) /* SPI Peripheral Chip Select 2 */
+#define AT91C_PIO_PA6 ((unsigned int) 1 << 6) /* Pin Controlled by PA6 */
+#define AT91C_PA6_NPCS3 ((unsigned int) AT91C_PIO_PA6) /* SPI Peripheral Chip Select 3 */
+
+
#define AT91C_PIO_PA16 ((unsigned int) 1 << 16) /* Pin Controlled by PA16 */
#define AT91C_PA16_EMDIO ((unsigned int) AT91C_PIO_PA16) /* Ethernet MAC Management Data Input/Output */
#define AT91C_PIO_PA15 ((unsigned int) 1 << 15) /* Pin Controlled by PA15 */
@@ -294,6 +507,8 @@
#define AT91C_PA8_ETXEN ((unsigned int) AT91C_PIO_PA8) /* Ethernet MAC Transmit Enable */
#define AT91C_PIO_PA7 ((unsigned int) 1 << 7) /* Pin Controlled by PA7 */
#define AT91C_PA7_ETXCK_EREFCK ((unsigned int) AT91C_PIO_PA7) /* Ethernet MAC Transmit Clock/Reference Clock */
+
+#define AT91C_PIO_PB7 ((unsigned int) 1 << 7) /* Pin Controlled by PB7 */
#define AT91C_PIO_PB25 ((unsigned int) 1 << 25) /* Pin Controlled by PB25 */
#define AT91C_PB25_DSR1 ((unsigned int) AT91C_PIO_PB25) /* USART 1 Data Set ready */
#define AT91C_PB25_EF100 ((unsigned int) AT91C_PIO_PB25) /* Ethernet MAC Force 100 Mbits */
@@ -323,7 +538,6 @@
#define AT91C_PB12_ETX2 ((unsigned int) AT91C_PIO_PB12) /* Ethernet MAC Transmit Data 2 */
#define AT91C_PIOB_BSR ((AT91_REG *) 0xFFFFF674) /* (PIOB) Select B Register */
-#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) /* (EMAC) Base Address */
#define AT91C_PIOB_PDR ((AT91_REG *) 0xFFFFF604) /* (PIOB) PIO Disable Register */
#define AT91C_EBI_CS3A_SMC_SmartMedia ((unsigned int) 0x1 << 3) /* (EBI) Chip Select 3 is assigned to the Static Memory Controller and the SmartMedia Logic is activated. */
@@ -335,8 +549,12 @@
#define AT91C_PIOC_CODR ((AT91_REG *) 0xFFFFF834) /* (PIOC) Clear Output Data Register */
#define AT91C_PIOC_PDSR ((AT91_REG *) 0xFFFFF83C) /* (PIOC) Pin Data Status Register */
+#define AT91C_BASE_SPI ((AT91PS_SPI) 0xFFFE0000) /* (SPI) Base Address */
+#define AT91C_BASE_EMAC ((AT91PS_EMAC) 0xFFFBC000) /* (EMAC) Base Address */
+#define AT91C_BASE_PMC ((AT91PS_PMC) 0xFFFFFC00) /* (PMC) Base Address */
#define AT91C_BASE_TC0 ((AT91PS_TC) 0xFFFA0000) /* (TC0) Base Address */
#define AT91C_BASE_DBGU ((AT91PS_DBGU) 0xFFFFF200) /* (DBGU) Base Address */
+#define AT91C_BASE_PIOB ((AT91PS_PIO) 0xFFFFF600) /* (PIOB) Base Address */
#define AT91C_BASE_PIOA ((AT91PS_PIO) 0xFFFFF400) /* (PIOA) Base Address */
#define AT91C_EBI_CSA ((AT91_REG *) 0xFFFFFF60) /* (EBI) Chip Select Assignment Register */
#define AT91C_BASE_SMC2 ((AT91PS_SMC2) 0xFFFFFF70) /* (SMC2) Base Address */
@@ -349,4 +567,5 @@
#define AT91C_PIOB_PER ((AT91_REG *) 0xFFFFF600) /* (PIOB) PIO Enable Register */
#define AT91C_PIOB_ODR ((AT91_REG *) 0xFFFFF614) /* (PIOB) Output Disable Registerr */
#define AT91C_PIOB_PDSR ((AT91_REG *) 0xFFFFF63C) /* (PIOB) Pin Data Status Register */
+
#endif
diff --git a/include/at91rm9200_net.h b/include/at91rm9200_net.h
new file mode 100644
index 0000000..e41fe3c
--- /dev/null
+++ b/include/at91rm9200_net.h
@@ -0,0 +1,59 @@
+/*
+ * Ethernet: An implementation of the Ethernet Device Driver suite for the
+ * uClinux 2.0.38 operating system. This Driver has been developed
+ * for AT75C220 board.
+ *
+ * NOTE: The driver is implemented for one MAC
+ *
+ * Version: @(#)at91rm9200_net.h 1.0.0 01/10/2001
+ *
+ * Authors: Lineo Inc <www.lineo.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_ETHERNET
+#define AT91RM9200_ETHERNET
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/arch/hardware.h>
+#include "dm9161.h"
+
+#define FALSE 0
+#define TRUE 1
+
+
+#define ETHERNET_ADDRESS_SIZE 6
+
+typedef unsigned char UCHAR;
+
+/* Interface to drive the physical layer */
+typedef struct _AT91S_PhyOps
+{
+ unsigned char (*Init)(AT91S_EMAC *pmac);
+ unsigned int (*IsPhyConnected)(AT91S_EMAC *pmac);
+ unsigned char (*GetLinkSpeed)(AT91S_EMAC *pmac);
+ unsigned char (*AutoNegotiate)(AT91S_EMAC *pmac, int *);
+
+} AT91S_PhyOps,*AT91PS_PhyOps;
+
+
+#define EMAC_DESC_DONE 0x00000001 /* ownership bit */
+#define EMAC_DESC_WRAP 0x00000002 /* bit for wrap */
+
+/****************** function prototypes **********************/
+
+/* MII functions */
+static void at91rm9200_EmacEnableMDIO(AT91PS_EMAC p_mac);
+static void at91rm9200_EmacDisableMDIO(AT91PS_EMAC p_mac);
+static UCHAR at91rm9200_EmacReadPhy(AT91PS_EMAC p_mac, unsigned char RegisterAddress, unsigned short *pInput);
+static UCHAR at91rm9200_EmacWritePhy(AT91PS_EMAC p_mac, unsigned char RegisterAddress, unsigned short *pOutput);
+void at91rm92000_GetPhyInterface(void );
+
+#endif /* AT91RM9200_ETHERNET */
+
diff --git a/include/configs/at91rm9200dk.h b/include/configs/at91rm9200dk.h
index 6315f0a..e382977 100644
--- a/include/configs/at91rm9200dk.h
+++ b/include/configs/at91rm9200dk.h
@@ -28,12 +28,14 @@
/* ARM asynchronous clock */
#define AT91C_MAIN_CLOCK 179712000 /* from 18.432 MHz crystal (18432000 / 4 * 39) */
#define AT91C_MASTER_CLOCK 59904000 /* peripheral clock (AT91C_MASTER_CLOCK / 3) */
+/* #define AT91C_MASTER_CLOCK 44928000 */ /* peripheral clock (AT91C_MASTER_CLOCK / 4) */
-#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
+#define CONFIG_AT91RM9200DK 1 /* on an AT91RM9200DK Board */
#undef CONFIG_USE_IRQ /* we don't need IRQ/FIQ stuff */
#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG 1
+
/*
* Size of malloc() pool
*/
@@ -43,24 +45,23 @@
* Hardware drivers
*/
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL3 1 /* we use SERIAL 3 */
-
#undef CONFIG_HWFLOW /* don't include RTS/CTS flow control support */
#undef CONFIG_MODEM_SUPPORT /* disable modem initialization stuff */
+#define CONFIG_BOOTDELAY 3
+/* #define CONFIG_ENV_OVERWRITE 1 */
+
#define CONFIG_COMMANDS \
- (CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
- CFG_CMD_NAND )
-/* CFG_CMD_EEPROM | \ might consider these
- CFG_CMD_I2C | \
- CFG_CMD_USB | \
- CFG_CMD_MII | \
- CFG_CMD_SDRAM | \ */
+ ((CONFIG_CMD_DFL | \
+ CFG_CMD_DHCP ) & \
+ ~(CFG_CMD_BDI | \
+ CFG_CMD_IMI | \
+ CFG_CMD_AUTOSCRIPT | \
+ CFG_CMD_FPGA | \
+ CFG_CMD_MISC | \
+ CFG_CMD_LOADS ))
+
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
@@ -101,6 +102,14 @@
#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
#define CONFIG_DRIVER_ETHER
+#define CONFIG_NET_RETRY_COUNT 20
+
+#define CONFIG_HAS_DATAFLASH 1
+#define CFG_SPI_WRITE_TOUT CFG_HZ
+#define CFG_MAX_DATAFLASH_BANKS 2
+#define CFG_MAX_DATAFLASH_PAGES 16384
+#define CFG_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 /* Logical adress for CS0 */
+#define CFG_DATAFLASH_LOGIC_ADDR_CS3 0xD0000000 /* Logical adress for CS3 */
#define PHYS_FLASH_1 0x10000000
#define PHYS_FLASH_SIZE 0x200000 /* 2 megs main flash */
@@ -110,10 +119,14 @@
#define CFG_FLASH_ERASE_TOUT (2*CFG_HZ) /* Timeout for Flash Erase */
#define CFG_FLASH_WRITE_TOUT (2*CFG_HZ) /* Timeout for Flash Write */
#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000)
-#define CFG_ENV_SIZE 0x2000
+#define CFG_ENV_ADDR (PHYS_FLASH_1 + 0xe000) /* 0x10000 */
+#define CFG_ENV_SIZE 0x2000 /* 0x8000 */
#define CFG_LOAD_ADDR 0x21000000 /* default load address */
+#define CFG_BOOT_SIZE 0x6000 /* 24 KBytes */
+#define CFG_U_BOOT_BASE (PHYS_FLASH_1 + 0x10000)
+#define CFG_U_BOOT_SIZE 0x10000 /* 64 KBytes */
+
#define CFG_BAUDRATE_TABLE {115200 , 19200, 38400, 57600, 9600 }
#define CFG_PROMPT "Uboot> " /* Monitor Command Prompt */
diff --git a/include/dataflash.h b/include/dataflash.h
new file mode 100644
index 0000000..cc4badf
--- /dev/null
+++ b/include/dataflash.h
@@ -0,0 +1,176 @@
+/*
+ * (C) Copyright 2003
+ * Data Flash Atmel Description File
+ * Author : Hamid Ikdoumi (Atmel)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* File Name : dataflash.h */
+/* Object : Data Flash Atmel Description File */
+/* Translator : */
+/* */
+/* 1.0 03/04/01 HI : Creation */
+/* 1.2 20/10/02 FB : Adapatation Service and Lib v3 */
+/*----------------------------------------------------------------------*/
+
+#ifndef _DataFlash_h
+#define _DataFlash_h
+
+
+#include <asm/arch/hardware.h>
+#include "config.h"
+
+
+typedef struct {
+ unsigned long base; /* logical base address for a bank */
+ unsigned long size; /* total bank size */
+ unsigned long page_count;
+ unsigned long page_size;
+ unsigned long id; /* device id */
+ unsigned char protect[CFG_MAX_DATAFLASH_PAGES]; /* page protection status */
+} dataflash_info_t;
+
+
+typedef unsigned int AT91S_DataFlashStatus;
+
+/*----------------------------------------------------------------------*/
+/* DataFlash Structures */
+/*----------------------------------------------------------------------*/
+
+/*---------------------------------------------*/
+/* DataFlash Descriptor Structure Definition */
+/*---------------------------------------------*/
+typedef struct _AT91S_DataflashDesc {
+ unsigned char *tx_cmd_pt;
+ unsigned int tx_cmd_size;
+ unsigned char *rx_cmd_pt;
+ unsigned int rx_cmd_size;
+ unsigned char *tx_data_pt;
+ unsigned int tx_data_size;
+ unsigned char *rx_data_pt;
+ unsigned int rx_data_size;
+ volatile unsigned char state;
+ volatile unsigned char DataFlash_state;
+ unsigned char command[8];
+} AT91S_DataflashDesc, *AT91PS_DataflashDesc;
+
+/*---------------------------------------------*/
+/* DataFlash device definition structure */
+/*---------------------------------------------*/
+typedef struct _AT91S_Dataflash {
+ int pages_number; /* dataflash page number */
+ int pages_size; /* dataflash page size */
+ int page_offset; /* page offset in command */
+ int byte_mask; /* byte mask in command */
+ int cs;
+} AT91S_DataflashFeatures, *AT91PS_DataflashFeatures;
+
+/*---------------------------------------------*/
+/* DataFlash Structure Definition */
+/*---------------------------------------------*/
+typedef struct _AT91S_DataFlash {
+ AT91PS_DataflashDesc pDataFlashDesc; /* dataflash descriptor */
+ AT91PS_DataflashFeatures pDevice; /* Pointer on a dataflash features array */
+} AT91S_DataFlash, *AT91PS_DataFlash;
+
+
+
+typedef struct _AT91S_DATAFLASH_INFO {
+
+ AT91S_DataflashDesc Desc;
+ AT91S_DataflashFeatures Device; /* Pointer on a dataflash features array */
+ unsigned long logical_address;
+ unsigned int id; /* device id */
+ unsigned char protect[CFG_MAX_DATAFLASH_PAGES]; /* page protection status */
+} AT91S_DATAFLASH_INFO, *AT91PS_DATAFLASH_INFO;
+
+
+/*-------------------------------------------------------------------------------------------------*/
+
+#define AT45DB161 0x2c
+#define AT45DB321 0x34
+#define AT45DB642 0x3c
+
+#define AT91C_DATAFLASH_TIMEOUT 10000 /* For AT91F_DataFlashWaitReady */
+
+/* DataFlash return value */
+#define DATAFLASH_BUSY 0x00
+#define DATAFLASH_OK 0x01
+#define DATAFLASH_ERROR 0x02
+#define DATAFLASH_MEMORY_OVERFLOW 0x03
+#define DATAFLASH_BAD_COMMAND 0x04
+#define DATAFLASH_BAD_ADDRESS 0x05
+
+
+/* Driver State */
+#define IDLE 0x0
+#define BUSY 0x1
+#define ERROR 0x2
+
+/* DataFlash Driver State */
+#define GET_STATUS 0x0F
+
+/*-------------------------------------------------------------------------------------------------*/
+/* Command Definition */
+/*-------------------------------------------------------------------------------------------------*/
+
+/* READ COMMANDS */
+#define DB_CONTINUOUS_ARRAY_READ 0xE8 /* Continuous array read */
+#define DB_BURST_ARRAY_READ 0xE8 /* Burst array read */
+#define DB_PAGE_READ 0xD2 /* Main memory page read */
+#define DB_BUF1_READ 0xD4 /* Buffer 1 read */
+#define DB_BUF2_READ 0xD6 /* Buffer 2 read */
+#define DB_STATUS 0xD7 /* Status Register */
+
+/* PROGRAM and ERASE COMMANDS */
+#define DB_BUF1_WRITE 0x84 /* Buffer 1 write */
+#define DB_BUF2_WRITE 0x87 /* Buffer 2 write */
+#define DB_BUF1_PAGE_ERASE_PGM 0x83 /* Buffer 1 to main memory page program with built-In erase */
+#define DB_BUF1_PAGE_ERASE_FASTPGM 0x93 /* Buffer 1 to main memory page program with built-In erase, Fast program */
+#define DB_BUF2_PAGE_ERASE_PGM 0x86 /* Buffer 2 to main memory page program with built-In erase */
+#define DB_BUF2_PAGE_ERASE_FASTPGM 0x96 /* Buffer 1 to main memory page program with built-In erase, Fast program */
+#define DB_BUF1_PAGE_PGM 0x88 /* Buffer 1 to main memory page program without built-In erase */
+#define DB_BUF1_PAGE_FASTPGM 0x98 /* Buffer 1 to main memory page program without built-In erase, Fast program */
+#define DB_BUF2_PAGE_PGM 0x89 /* Buffer 2 to main memory page program without built-In erase */
+#define DB_BUF2_PAGE_FASTPGM 0x99 /* Buffer 1 to main memory page program without built-In erase, Fast program */
+#define DB_PAGE_ERASE 0x81 /* Page Erase */
+#define DB_BLOCK_ERASE 0x50 /* Block Erase */
+#define DB_PAGE_PGM_BUF1 0x82 /* Main memory page through buffer 1 */
+#define DB_PAGE_FASTPGM_BUF1 0x92 /* Main memory page through buffer 1, Fast program */
+#define DB_PAGE_PGM_BUF2 0x85 /* Main memory page through buffer 2 */
+#define DB_PAGE_FastPGM_BUF2 0x95 /* Main memory page through buffer 2, Fast program */
+
+/* ADDITIONAL COMMANDS */
+#define DB_PAGE_2_BUF1_TRF 0x53 /* Main memory page to buffer 1 transfert */
+#define DB_PAGE_2_BUF2_TRF 0x55 /* Main memory page to buffer 2 transfert */
+#define DB_PAGE_2_BUF1_CMP 0x60 /* Main memory page to buffer 1 compare */
+#define DB_PAGE_2_BUF2_CMP 0x61 /* Main memory page to buffer 2 compare */
+#define DB_AUTO_PAGE_PGM_BUF1 0x58 /* Auto page rewrite throught buffer 1 */
+#define DB_AUTO_PAGE_PGM_BUF2 0x59 /* Auto page rewrite throught buffer 2 */
+
+/*-------------------------------------------------------------------------------------------------*/
+
+extern int addr_dataflash (unsigned long addr);
+extern int read_dataflash (unsigned long addr, unsigned long size, char *result);
+extern int write_dataflash (unsigned long addr, unsigned long dest, unsigned long size);
+extern void dataflash_print_info (void);
+extern void dataflash_perror (int err);
+
+#endif
diff --git a/include/dm9161.h b/include/dm9161.h
new file mode 100644
index 0000000..6299921
--- /dev/null
+++ b/include/dm9161.h
@@ -0,0 +1,130 @@
+/*
+ * NOTE: DAVICOM ethernet Physical layer
+ *
+ * Version: @(#)DM9161.h 1.0.0 01/10/2001
+ *
+ * Authors: ATMEL Rousset
+ *
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+
+// DAVICOM PHYSICAL LAYER TRANSCEIVER DM9161
+
+#define DM9161_BMCR 0 // Basic Mode Control Register
+#define DM9161_BMSR 1 // Basic Mode Status Register
+#define DM9161_PHYID1 2 // PHY Idendifier Register 1
+#define DM9161_PHYID2 3 // PHY Idendifier Register 2
+#define DM9161_ANAR 4 // Auto_Negotiation Advertisement Register
+#define DM9161_ANLPAR 5 // Auto_negotiation Link Partner Ability Register
+#define DM9161_ANER 6 // Auto-negotiation Expansion Register
+#define DM9161_DSCR 16 // Specified Configuration Register
+#define DM9161_DSCSR 17 // Specified Configuration and Status Register
+#define DM9161_10BTCSR 18 // 10BASE-T Configuration and Satus Register
+#define DM9161_MDINTR 21 // Specified Interrupt Register
+#define DM9161_RECR 22 // Specified Receive Error Counter Register
+#define DM9161_DISCR 23 // Specified Disconnect Counter Register
+#define DM9161_RLSR 24 // Hardware Reset Latch State Register
+
+
+// --Bit definitions: DM9161_BMCR
+#define DM9161_RESET (1 << 15) // 1= Software Reset; 0=Normal Operation
+#define DM9161_LOOPBACK (1 << 14) // 1=loopback Enabled; 0=Normal Operation
+#define DM9161_SPEED_SELECT (1 << 13) // 1=100Mbps; 0=10Mbps
+#define DM9161_AUTONEG (1 << 12)
+#define DM9161_POWER_DOWN (1 << 11)
+#define DM9161_ISOLATE (1 << 10)
+#define DM9161_RESTART_AUTONEG (1 << 9)
+#define DM9161_DUPLEX_MODE (1 << 8)
+#define DM9161_COLLISION_TEST (1 << 7)
+
+//--Bit definitions: DM9161_BMSR
+#define DM9161_100BASE_T4 (1 << 15)
+#define DM9161_100BASE_TX_FD (1 << 14)
+#define DM9161_100BASE_T4_HD (1 << 13)
+#define DM9161_10BASE_T_FD (1 << 12)
+#define DM9161_10BASE_T_HD (1 << 11)
+#define DM9161_MF_PREAMB_SUPPR (1 << 6)
+#define DM9161_AUTONEG_COMP (1 << 5)
+#define DM9161_REMOTE_FAULT (1 << 4)
+#define DM9161_AUTONEG_ABILITY (1 << 3)
+#define DM9161_LINK_STATUS (1 << 2)
+#define DM9161_JABBER_DETECT (1 << 1)
+#define DM9161_EXTEND_CAPAB (1 << 0)
+
+//--definitions: DM9161_PHYID1
+#define DM9161_PHYID1_OUI 0x606E
+#define DM9161_LSB_MASK 0x3F
+
+//--Bit definitions: DM9161_ANAR, DM9161_ANLPAR
+#define DM9161_NP (1 << 15)
+#define DM9161_ACK (1 << 14)
+#define DM9161_RF (1 << 13)
+#define DM9161_FCS (1 << 10)
+#define DM9161_T4 (1 << 9)
+#define DM9161_TX_FDX (1 << 8)
+#define DM9161_TX_HDX (1 << 7)
+#define DM9161_10_FDX (1 << 6)
+#define DM9161_10_HDX (1 << 5)
+#define DM9161_AN_IEEE_802_3 0x0001
+
+//--Bit definitions: DM9161_ANER
+#define DM9161_PDF (1 << 4)
+#define DM9161_LP_NP_ABLE (1 << 3)
+#define DM9161_NP_ABLE (1 << 2)
+#define DM9161_PAGE_RX (1 << 1)
+#define DM9161_LP_AN_ABLE (1 << 0)
+
+//--Bit definitions: DM9161_DSCR
+#define DM9161_BP4B5B (1 << 15)
+#define DM9161_BP_SCR (1 << 14)
+#define DM9161_BP_ALIGN (1 << 13)
+#define DM9161_BP_ADPOK (1 << 12)
+#define DM9161_REPEATER (1 << 11)
+#define DM9161_TX (1 << 10)
+#define DM9161_RMII_ENABLE (1 << 8)
+#define DM9161_F_LINK_100 (1 << 7)
+#define DM9161_SPLED_CTL (1 << 6)
+#define DM9161_COLLED_CTL (1 << 5)
+#define DM9161_RPDCTR_EN (1 << 4)
+#define DM9161_SM_RST (1 << 3)
+#define DM9161_MFP SC (1 << 2)
+#define DM9161_SLEEP (1 << 1)
+#define DM9161_RLOUT (1 << 0)
+
+//--Bit definitions: DM9161_DSCSR
+#define DM9161_100FDX (1 << 15)
+#define DM9161_100HDX (1 << 14)
+#define DM9161_10FDX (1 << 13)
+#define DM9161_10HDX (1 << 12)
+
+//--Bit definitions: DM9161_10BTCSR
+#define DM9161_LP_EN (1 << 14)
+#define DM9161_HBE (1 << 13)
+#define DM9161_SQUELCH (1 << 12)
+#define DM9161_JABEN (1 << 11)
+#define DM9161_10BT_SER (1 << 10)
+#define DM9161_POLR (1 << 0)
+
+
+//--Bit definitions: DM9161_MDINTR
+#define DM9161_INTR_PEND (1 << 15)
+#define DM9161_FDX_MASK (1 << 11)
+#define DM9161_SPD_MASK (1 << 10)
+#define DM9161_LINK_MASK (1 << 9)
+#define DM9161_INTR_MASK (1 << 8)
+#define DM9161_FDX_CHANGE (1 << 4)
+#define DM9161_SPD_CHANGE (1 << 3)
+#define DM9161_LINK_CHANGE (1 << 2)
+#define DM9161_INTR_STATUS (1 << 0)
+
+
+/****************** function prototypes **********************/
+static unsigned int dm9161_IsPhyConnected(AT91PS_EMAC p_mac);
+static unsigned char dm9161_GetLinkSpeed(AT91PS_EMAC p_mac);
+static unsigned char dm9161_AutoNegotiate(AT91PS_EMAC p_mac, int *status);
+static unsigned char dm9161_InitPhy(AT91PS_EMAC p_mac);
diff --git a/include/flash.h b/include/flash.h
index 882652d..e594788 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -12,7 +12,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -33,15 +33,15 @@
ulong size; /* total bank size in bytes */
ushort sector_count; /* number of erase units */
ulong flash_id; /* combined device & manufacturer code */
- ulong start[CFG_MAX_FLASH_SECT]; /* physical sector start addresses */
+ ulong start[CFG_MAX_FLASH_SECT]; /* physical sector start addresses */
uchar protect[CFG_MAX_FLASH_SECT]; /* sector protection status */
#ifdef CFG_FLASH_CFI
uchar portwidth; /* the width of the port */
uchar chipwidth; /* the width of the chip */
- ushort buffer_size; /* # of bytes in write buffer */
+ ushort buffer_size; /* # of bytes in write buffer */
ulong erase_blk_tout; /* maximum block erase timeout */
ulong write_tout; /* maximum write timeout */
- ulong buffer_write_tout; /* maximum buffer write timeout */
+ ulong buffer_write_tout; /* maximum buffer write timeout */
#endif
} flash_info_t;
@@ -103,20 +103,20 @@
* Device IDs
*/
-#define AMD_MANUFACT 0x00010001 /* AMD manuf. ID in D23..D16, D7..D0 */
+#define AMD_MANUFACT 0x00010001 /* AMD manuf. ID in D23..D16, D7..D0 */
#define FUJ_MANUFACT 0x00040004 /* FUJITSU manuf. ID in D23..D16, D7..D0 */
-#define ATM_MANUFACT 0x001F001F /* ATMEL */
-#define STM_MANUFACT 0x00200020 /* STM (Thomson) manuf. ID in D23.. -"- */
-#define SST_MANUFACT 0x00BF00BF /* SST manuf. ID in D23..D16, D7..D0 */
-#define MT_MANUFACT 0x00890089 /* MT manuf. ID in D23..D16, D7..D0 */
+#define ATM_MANUFACT 0x001F001F /* ATMEL */
+#define STM_MANUFACT 0x00200020 /* STM (Thomson) manuf. ID in D23.. -"- */
+#define SST_MANUFACT 0x00BF00BF /* SST manuf. ID in D23..D16, D7..D0 */
+#define MT_MANUFACT 0x00890089 /* MT manuf. ID in D23..D16, D7..D0 */
#define INTEL_MANUFACT 0x00890089 /* INTEL manuf. ID in D23..D16, D7..D0 */
-#define INTEL_ALT_MANU 0x00B000B0 /* alternate INTEL namufacturer ID */
+#define INTEL_ALT_MANU 0x00B000B0 /* alternate INTEL namufacturer ID */
#define MX_MANUFACT 0x00C200C2 /* MXIC manuf. ID in D23..D16, D7..D0 */
#define TOSH_MANUFACT 0x00980098 /* TOSHIBA manuf. ID in D23..D16, D7..D0 */
/* Micron Technologies (INTEL compat.) */
#define MT_ID_28F400_T 0x44704470 /* 28F400B3 ID ( 4 M, top boot sector) */
-#define MT_ID_28F400_B 0x44714471 /* 28F400B3 ID ( 4 M, bottom boot sect) */
+#define MT_ID_28F400_B 0x44714471 /* 28F400B3 ID ( 4 M, bottom boot sect) */
#define AMD_ID_LV040B 0x4F /* 29LV040B ID */
/* 4 Mbit, 512K x 8, */
@@ -125,7 +125,7 @@
#define AMD_ID_F040B 0xA4 /* 29F040B ID */
/* 4 Mbit, 512K x 8, */
/* 8 64K x 8 uniform sectors */
-#define STM_ID_M29W040B 0xE3 /* M29W040B ID */
+#define STM_ID_M29W040B 0xE3 /* M29W040B ID */
/* 4 Mbit, 512K x 8, */
/* 8 64K x 8 uniform sectors */
#define AMD_ID_F080B 0xD5 /* 29F080 ID ( 1 M) */
@@ -137,49 +137,50 @@
#define AMD_ID_LV016B 0xc8 /* 29LV016 ID ( 2 M x 8) */
#define AMD_ID_LV400T 0x22B922B9 /* 29LV400T ID ( 4 M, top boot sector) */
-#define AMD_ID_LV400B 0x22BA22BA /* 29LV400B ID ( 4 M, bottom boot sect) */
+#define AMD_ID_LV400B 0x22BA22BA /* 29LV400B ID ( 4 M, bottom boot sect) */
#define AMD_ID_LV033C 0xA3 /* 29LV033C ID ( 4M x 8 ) */
#define AMD_ID_LV800T 0x22DA22DA /* 29LV800T ID ( 8 M, top boot sector) */
-#define AMD_ID_LV800B 0x225B225B /* 29LV800B ID ( 8 M, bottom boot sect) */
+#define AMD_ID_LV800B 0x225B225B /* 29LV800B ID ( 8 M, bottom boot sect) */
#define AMD_ID_LV160T 0x22C422C4 /* 29LV160T ID (16 M, top boot sector) */
-#define AMD_ID_LV160B 0x22492249 /* 29LV160B ID (16 M, bottom boot sect) */
+#define AMD_ID_LV160B 0x22492249 /* 29LV160B ID (16 M, bottom boot sect) */
#define AMD_ID_LV320T 0x22F622F6 /* 29LV320T ID (32 M, top boot sector) */
-#define AMD_ID_LV320B 0x22F922F9 /* 29LV320B ID (32 M, bottom boot sect) */
+#define AMD_ID_LV320B 0x22F922F9 /* 29LV320B ID (32 M, bottom boot sect) */
#define AMD_ID_DL322T 0x22552255 /* 29DL322T ID (32 M, top boot sector) */
-#define AMD_ID_DL322B 0x22562256 /* 29DL322B ID (32 M, bottom boot sect) */
+#define AMD_ID_DL322B 0x22562256 /* 29DL322B ID (32 M, bottom boot sect) */
#define AMD_ID_DL323T 0x22502250 /* 29DL323T ID (32 M, top boot sector) */
-#define AMD_ID_DL323B 0x22532253 /* 29DL323B ID (32 M, bottom boot sect) */
+#define AMD_ID_DL323B 0x22532253 /* 29DL323B ID (32 M, bottom boot sect) */
#define AMD_ID_DL324T 0x225C225C /* 29DL324T ID (32 M, top boot sector) */
#define AMD_ID_DL324B 0x225F225F /* 29DL324B ID (32 M, bottom boot sect) */
#define AMD_ID_DL640 0x227E227E /* 29DL640D ID (64 M, dual boot sectors)*/
-#define AMD_ID_MIRROR 0x227E227E /* 1st ID word for MirrorBit family */
-#define AMD_ID_LV128U_2 0x22122212 /* 2d ID word for AM29LV128M at 0x38 */
-#define AMD_ID_LV128U_3 0x22002200 /* 3d ID word for AM29LV128M at 0x3c */
+#define AMD_ID_MIRROR 0x227E227E /* 1st ID word for MirrorBit family */
+#define AMD_ID_LV128U_2 0x22122212 /* 2d ID word for AM29LV128M at 0x38 */
+#define AMD_ID_LV128U_3 0x22002200 /* 3d ID word for AM29LV128M at 0x3c */
#define AMD_ID_LV640U 0x22D722D7 /* 29LV640U ID (64 M, uniform sectors) */
-#define ATM_ID_BV1614 0x000000C0 /* 49BV1614 ID */
+#define ATM_ID_BV1614 0x000000C0 /* 49BV1614 ID */
+#define ATM_ID_BV1614A 0x000000C8 /* 49BV1614A ID */
-#define FUJI_ID_29F800BA 0x22582258 /* MBM29F800BA ID (8M) */
-#define FUJI_ID_29F800TA 0x22D622D6 /* MBM29F800TA ID (8M) */
+#define FUJI_ID_29F800BA 0x22582258 /* MBM29F800BA ID (8M) */
+#define FUJI_ID_29F800TA 0x22D622D6 /* MBM29F800TA ID (8M) */
-#define SST_ID_xF200A 0x27892789 /* 39xF200A ID ( 2M = 128K x 16 ) */
-#define SST_ID_xF400A 0x27802780 /* 39xF400A ID ( 4M = 256K x 16 ) */
-#define SST_ID_xF800A 0x27812781 /* 39xF800A ID ( 8M = 512K x 16 ) */
-#define SST_ID_xF160A 0x27822782 /* 39xF800A ID (16M = 1M x 16 ) */
+#define SST_ID_xF200A 0x27892789 /* 39xF200A ID ( 2M = 128K x 16 ) */
+#define SST_ID_xF400A 0x27802780 /* 39xF400A ID ( 4M = 256K x 16 ) */
+#define SST_ID_xF800A 0x27812781 /* 39xF800A ID ( 8M = 512K x 16 ) */
+#define SST_ID_xF160A 0x27822782 /* 39xF800A ID (16M = 1M x 16 ) */
-#define STM_ID_F040B 0xE2 /* M29F040B ID ( 4M = 512K x 8 ) */
+#define STM_ID_F040B 0xE2 /* M29F040B ID ( 4M = 512K x 8 ) */
/* 8 64K x 8 uniform sectors */
-#define STM_ID_x800AB 0x005B005B /* M29W800AB ID (8M = 512K x 16 ) */
-#define STM_ID_29W320DT 0x22CA22CA /* M29W320DT ID (32 M, top boot sector) */
-#define STM_ID_29W320DB 0x22CB22CB /* M29W320DB ID (32 M, bottom boot sect) */
+#define STM_ID_x800AB 0x005B005B /* M29W800AB ID (8M = 512K x 16 ) */
+#define STM_ID_29W320DT 0x22CA22CA /* M29W320DT ID (32 M, top boot sector) */
+#define STM_ID_29W320DB 0x22CB22CB /* M29W320DB ID (32 M, bottom boot sect) */
#define STM_ID_29W040B 0x00E300E3 /* M29W040B ID (4M = 512K x 8) */
#define INTEL_ID_28F016S 0x66a066a0 /* 28F016S[VS] ID (16M = 512k x 16) */
@@ -202,7 +203,7 @@
#define INTEL_ID_28F640C3T 0x88CC88CC /* 64M = 4M x 16 top boot sector */
#define INTEL_ID_28F640C3B 0x88CD88CD /* 64M = 4M x 16 bottom boot sector */
-#define INTEL_ID_28F128J3 0x89189818 /* 16M = 8M x 16 x 128 */
+#define INTEL_ID_28F128J3 0x89189818 /* 16M = 8M x 16 x 128 */
#define INTEL_ID_28F640J5 0x00150015 /* 64M = 128K x 64 */
#define INTEL_ID_28F320J3A 0x00160016 /* 32M = 128K x 32 */
#define INTEL_ID_28F640J3A 0x00170017 /* 64M = 128K x 64 */
@@ -217,8 +218,8 @@
#define SHARP_ID_28F008SC 0xA6A6A6A6 /* LH28F008SCT-L12 1Mx8, 16 64k blocks */
/* LH28F008SCR-L85 1Mx8, 16 64k blocks */
-#define TOSH_ID_FVT160 0xC2 /* TC58FVT160 ID (16 M, top ) */
-#define TOSH_ID_FVB160 0x43 /* TC58FVT160 ID (16 M, bottom ) */
+#define TOSH_ID_FVT160 0xC2 /* TC58FVT160 ID (16 M, top ) */
+#define TOSH_ID_FVB160 0x43 /* TC58FVT160 ID (16 M, bottom ) */
/*-----------------------------------------------------------------------
* Internal FLASH identification codes
@@ -226,25 +227,25 @@
* Be careful when adding new type! Odd numbers are "bottom boot sector" types!
*/
-#define FLASH_AM040 0x0001 /* AMD Am29F040B, Am29LV040B */
- /* Bright Micro BM29F040 */
- /* Fujitsu MBM29F040A */
- /* STM M29W040B */
- /* SGS Thomson M29F040B */
- /* 8 64K x 8 uniform sectors */
+#define FLASH_AM040 0x0001 /* AMD Am29F040B, Am29LV040B */
+ /* Bright Micro BM29F040 */
+ /* Fujitsu MBM29F040A */
+ /* STM M29W040B */
+ /* SGS Thomson M29F040B */
+ /* 8 64K x 8 uniform sectors */
#define FLASH_AM400T 0x0002 /* AMD AM29LV400 */
#define FLASH_AM400B 0x0003
#define FLASH_AM800T 0x0004 /* AMD AM29LV800 */
#define FLASH_AM800B 0x0005
#define FLASH_AM116DT 0x0026 /* AMD AM29LV116DT (2Mx8bit) */
#define FLASH_AM160T 0x0006 /* AMD AM29LV160 */
-#define FLASH_AM160LV 0x0046 /* AMD29LV160DB (2M = 2Mx8bit ) */
+#define FLASH_AM160LV 0x0046 /* AMD29LV160DB (2M = 2Mx8bit ) */
#define FLASH_AM160B 0x0007
#define FLASH_AM320T 0x0008 /* AMD AM29LV320 */
#define FLASH_AM320B 0x0009
-#define FLASH_AM080 0x000A /* AMD Am29F080B */
- /* 16 64K x 8 uniform sectors */
+#define FLASH_AM080 0x000A /* AMD Am29F080B */
+ /* 16 64K x 8 uniform sectors */
#define FLASH_AMDL322T 0x0010 /* AMD AM29DL322 */
#define FLASH_AMDL322B 0x0011
@@ -262,8 +263,8 @@
#define FLASH_SST160A 0x0046 /* SST 39xF160A ID ( 16M = 1M x 16 ) */
#define FLASH_STM800AB 0x0051 /* STM M29WF800AB ( 8M = 512K x 16 ) */
-#define FLASH_STMW320DT 0x0052 /* STM M29W320DT (32 M, top boot sector) */
-#define FLASH_STMW320DB 0x0053 /* STM M29W320DB (32 M, bottom boot sect)*/
+#define FLASH_STMW320DT 0x0052 /* STM M29W320DT (32 M, top boot sector) */
+#define FLASH_STMW320DB 0x0053 /* STM M29W320DB (32 M, bottom boot sect)*/
#define FLASH_STM320DB 0x00CB /* STM M29W320DB (4M = 64K x 64, bottom)*/
#define FLASH_STM800DT 0x00D7 /* STM M29W800DT (1M = 64K x 16, top) */
#define FLASH_STM800DB 0x005B /* STM M29W800DB (1M = 64K x 16, bottom)*/
@@ -287,26 +288,26 @@
#define FLASH_28F008S5 0x0080 /* Intel 28F008S5 ( 1M = 64K x 16 ) */
#define FLASH_28F016SV 0x0081 /* Intel 28F016SV ( 16M = 512k x 32 ) */
#define FLASH_28F800_B 0x0083 /* Intel E28F800B ( 1M = ? ) */
-#define FLASH_AM29F800B 0x0084 /* AMD Am29F800BB ( 1M = ? ) */
+#define FLASH_AM29F800B 0x0084 /* AMD Am29F800BB ( 1M = ? ) */
#define FLASH_28F320J5 0x0085 /* Intel 28F320J5 ( 4M = 128K x 32 ) */
#define FLASH_28F160S3 0x0086 /* Intel 28F160S3 ( 16M = 512K x 32 ) */
#define FLASH_28F320S3 0x0088 /* Intel 28F320S3 ( 32M = 512K x 64 ) */
#define FLASH_AM640U 0x0090 /* AMD Am29LV640U ( 64M = 4M x 16 ) */
#define FLASH_AM033C 0x0091 /* AMD AM29LV033 ( 32M = 4M x 8 ) */
-#define FLASH_LH28F016SCT 0x0092 /* Sharp 28F016SCT ( 8 Meg Flash SIMM ) */
-#define FLASH_28F160F3B 0x0093 /* Intel 28F160F3B ( 16M = 1M x 16 ) */
+#define FLASH_LH28F016SCT 0x0092 /* Sharp 28F016SCT ( 8 Meg Flash SIMM ) */
+#define FLASH_28F160F3B 0x0093 /* Intel 28F160F3B ( 16M = 1M x 16 ) */
-#define FLASH_28F640J5 0x0099 /* INTEL 28F640J5 ( 64M = 128K x 64) */
+#define FLASH_28F640J5 0x0099 /* INTEL 28F640J5 ( 64M = 128K x 64) */
-#define FLASH_28F800C3T 0x009A /* Intel 28F800C3T ( 8M = 512K x 16 ) */
-#define FLASH_28F800C3B 0x009B /* Intel 28F800C3B ( 8M = 512K x 16 ) */
-#define FLASH_28F160C3T 0x009C /* Intel 28F160C3T ( 16M = 1M x 16 ) */
-#define FLASH_28F160C3B 0x009D /* Intel 28F160C3B ( 16M = 1M x 16 ) */
-#define FLASH_28F320C3T 0x009E /* Intel 28F320C3T ( 32M = 2M x 16 ) */
-#define FLASH_28F320C3B 0x009F /* Intel 28F320C3B ( 32M = 2M x 16 ) */
-#define FLASH_28F640C3T 0x00A0 /* Intel 28F640C3T ( 64M = 4M x 16 ) */
-#define FLASH_28F640C3B 0x00A1 /* Intel 28F640C3B ( 64M = 4M x 16 ) */
-#define FLASH_AMLV128U 0x00A2 /* AMD 29LV128M ( 128M = 8M x 16 ) */
+#define FLASH_28F800C3T 0x009A /* Intel 28F800C3T ( 8M = 512K x 16 ) */
+#define FLASH_28F800C3B 0x009B /* Intel 28F800C3B ( 8M = 512K x 16 ) */
+#define FLASH_28F160C3T 0x009C /* Intel 28F160C3T ( 16M = 1M x 16 ) */
+#define FLASH_28F160C3B 0x009D /* Intel 28F160C3B ( 16M = 1M x 16 ) */
+#define FLASH_28F320C3T 0x009E /* Intel 28F320C3T ( 32M = 2M x 16 ) */
+#define FLASH_28F320C3B 0x009F /* Intel 28F320C3B ( 32M = 2M x 16 ) */
+#define FLASH_28F640C3T 0x00A0 /* Intel 28F640C3T ( 64M = 4M x 16 ) */
+#define FLASH_28F640C3B 0x00A1 /* Intel 28F640C3B ( 64M = 4M x 16 ) */
+#define FLASH_AMLV128U 0x00A2 /* AMD 29LV128M ( 128M = 8M x 16 ) */
#define FLASH_UNKNOWN 0xFFFF /* unknown flash type */
@@ -318,14 +319,14 @@
#define FLASH_MAN_BM 0x00020000 /* Bright Microelectronics */
#define FLASH_MAN_MX 0x00030000 /* MXIC */
#define FLASH_MAN_STM 0x00040000
-#define FLASH_MAN_TOSH 0x00050000 /* Toshiba */
+#define FLASH_MAN_TOSH 0x00050000 /* Toshiba */
#define FLASH_MAN_SST 0x00100000
-#define FLASH_MAN_INTEL 0x00300000
+#define FLASH_MAN_INTEL 0x00300000
#define FLASH_MAN_MT 0x00400000
-#define FLASH_MAN_SHARP 0x00500000
+#define FLASH_MAN_SHARP 0x00500000
-#define FLASH_TYPEMASK 0x0000FFFF /* extract FLASH type information */
+#define FLASH_TYPEMASK 0x0000FFFF /* extract FLASH type information */
#define FLASH_VENDMASK 0xFFFF0000 /* extract FLASH vendor information */
#define FLASH_AMD_COMP 0x000FFFFF /* Up to this ID, FLASH is compatible */
diff --git a/lib_arm/armlinux.c b/lib_arm/armlinux.c
index 2fb8db8..0305803 100644
--- a/lib_arm/armlinux.c
+++ b/lib_arm/armlinux.c
@@ -27,6 +27,9 @@
#include <image.h>
#include <zlib.h>
#include <asm/byteorder.h>
+#ifdef CONFIG_HAS_DATAFLASH
+#include <dataflash.h>
+#endif
#include <asm/setup.h>
#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2)
@@ -94,6 +97,11 @@
printf ("## Loading Ramdisk Image at %08lx ...\n", addr);
/* Copy header so we can blank CRC field for re-calculation */
+#ifdef CONFIG_HAS_DATAFLASH
+ if (addr_dataflash(addr)){
+ read_dataflash(addr, sizeof(image_header_t), (char *)&header);
+ } else
+#endif
memcpy (&header, (char *)addr, sizeof(image_header_t));
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
@@ -121,6 +129,13 @@
data = addr + sizeof(image_header_t);
len = ntohl(hdr->ih_size);
+#ifdef CONFIG_HAS_DATAFLASH
+ if (addr_dataflash(addr)){
+ read_dataflash(data, len, (char *)CFG_LOAD_ADDR);
+ data = CFG_LOAD_ADDR;
+ }
+#endif
+
if (verify) {
ulong csum = 0;
diff --git a/lib_arm/board.c b/lib_arm/board.c
index af6af14..37d4d9f 100644
--- a/lib_arm/board.c
+++ b/lib_arm/board.c
@@ -37,6 +37,11 @@
ulong monitor_flash_len;
+#ifdef CONFIG_HAS_DATAFLASH
+extern int AT91F_DataflashInit(void);
+extern void dataflash_print_info(void);
+#endif
+
const char version_string[] =
U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
@@ -242,6 +247,11 @@
nand_init(); /* go init the NAND */
#endif
+#ifdef CONFIG_HAS_DATAFLASH
+ AT91F_DataflashInit();
+ dataflash_print_info();
+#endif
+
/* initialize environment */
env_relocate ();