diff --git a/arch/arm/cpu/armv7/omap4/Makefile b/arch/arm/cpu/armv7/omap4/Makefile
index 987dc9d..ac4b2a6 100644
--- a/arch/arm/cpu/armv7/omap4/Makefile
+++ b/arch/arm/cpu/armv7/omap4/Makefile
@@ -28,6 +28,7 @@
 SOBJS	+= lowlevel_init.o
 
 COBJS	+= board.o
+COBJS	+= clocks.o
 COBJS	+= mem.o
 COBJS	+= sys_info.o
 
diff --git a/arch/arm/cpu/armv7/omap4/board.c b/arch/arm/cpu/armv7/omap4/board.c
index 09861a9..1c26a66 100644
--- a/arch/arm/cpu/armv7/omap4/board.c
+++ b/arch/arm/cpu/armv7/omap4/board.c
@@ -154,6 +154,7 @@
 	init_omap4_revision();
 	watchdog_init();
 	set_mux_conf_regs();
+	prcm_init();
 }
 
 /*
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
new file mode 100644
index 0000000..e8d3a52
--- /dev/null
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -0,0 +1,809 @@
+/*
+ *
+ * Clock initialization for OMAP4
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * Based on previous work by:
+ *	Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *	Rajendra Nayak <rnayak@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/utils.h>
+
+#ifndef CONFIG_SPL_BUILD
+/*
+ * printing to console doesn't work unless
+ * this code is executed from SPL
+ */
+#define printf(fmt, args...)
+#define puts(s)
+#endif
+
+#define abs(x) (((x) < 0) ? ((x)*-1) : (x))
+
+struct omap4_prcm_regs *const prcm = (struct omap4_prcm_regs *)0x4A004100;
+
+static const u32 sys_clk_array[8] = {
+	12000000,	       /* 12 MHz */
+	13000000,	       /* 13 MHz */
+	16800000,	       /* 16.8 MHz */
+	19200000,	       /* 19.2 MHz */
+	26000000,	       /* 26 MHz */
+	27000000,	       /* 27 MHz */
+	38400000,	       /* 38.4 MHz */
+};
+
+/*
+ * The M & N values in the following tables are created using the
+ * following tool:
+ * tools/omap/clocks_get_m_n.c
+ * Please use this tool for creating the table for any new frequency.
+ */
+
+/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo) */
+static const struct dpll_params mpu_dpll_params_1584mhz[NUM_SYS_CLKS] = {
+	{66, 0, 1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{792, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{330, 6, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{165, 3, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{396, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{88, 2, 1, -1, -1, -1, -1, -1},		/* 27 MHz   */
+	{165, 7, 1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* dpll locked at 1200 MHz - MPU clk at 600 MHz */
+static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
+	{50, 0, 1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{600, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{250, 6, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 3, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{300, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{200, 8, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 7, 1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, 5, 8, 4, 6, 5},	/* 12 MHz   */
+	{800, 12, 1, 5, 8, 4, 6, 5},	/* 13 MHz   */
+	{619, 12, 1, 5, 8, 4, 6, 5},	/* 16.8 MHz */
+	{125, 2, 1, 5, 8, 4, 6, 5},	/* 19.2 MHz */
+	{400, 12, 1, 5, 8, 4, 6, 5},	/* 26 MHz   */
+	{800, 26, 1, 5, 8, 4, 6, 5},	/* 27 MHz   */
+	{125, 5, 1, 5, 8, 4, 6, 5}	/* 38.4 MHz */
+};
+
+static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
+	{127, 1, 1, 5, 8, 4, 6, 5},	/* 12 MHz   */
+	{762, 12, 1, 5, 8, 4, 6, 5},	/* 13 MHz   */
+	{635, 13, 1, 5, 8, 4, 6, 5},	/* 16.8 MHz */
+	{635, 15, 1, 5, 8, 4, 6, 5},	/* 19.2 MHz */
+	{381, 12, 1, 5, 8, 4, 6, 5},	/* 26 MHz   */
+	{254, 8, 1, 5, 8, 4, 6, 5},	/* 27 MHz   */
+	{496, 24, 1, 5, 8, 4, 6, 5}	/* 38.4 MHz */
+};
+
+static const struct dpll_params
+		core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
+	{200, 2, 2, 5, 8, 4, 6, 5},	/* 12 MHz   */
+	{800, 12, 2, 5, 8, 4, 6, 5},	/* 13 MHz   */
+	{619, 12, 2, 5, 8, 4, 6, 5},	/* 16.8 MHz */
+	{125, 2, 2, 5, 8, 4, 6, 5},	/* 19.2 MHz */
+	{400, 12, 2, 5, 8, 4, 6, 5},	/* 26 MHz   */
+	{800, 26, 2, 5, 8, 4, 6, 5},	/* 27 MHz   */
+	{125, 5, 2, 5, 8, 4, 6, 5}	/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
+	{64, 0, 8, 6, 12, 9, 4, 5},	/* 12 MHz   */
+	{768, 12, 8, 6, 12, 9, 4, 5},	/* 13 MHz   */
+	{320, 6, 8, 6, 12, 9, 4, 5},	/* 16.8 MHz */
+	{40, 0, 8, 6, 12, 9, 4, 5},	/* 19.2 MHz */
+	{384, 12, 8, 6, 12, 9, 4, 5},	/* 26 MHz   */
+	{256, 8, 8, 6, 12, 9, 4, 5},	/* 27 MHz   */
+	{20, 0, 8, 6, 12, 9, 4, 5}	/* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
+	{931, 11, -1, -1, 4, 7, -1, -1},	/* 12 MHz   */
+	{931, 12, -1, -1, 4, 7, -1, -1},	/* 13 MHz   */
+	{665, 11, -1, -1, 4, 7, -1, -1},	/* 16.8 MHz */
+	{727, 14, -1, -1, 4, 7, -1, -1},	/* 19.2 MHz */
+	{931, 25, -1, -1, 4, 7, -1, -1},	/* 26 MHz   */
+	{931, 26, -1, -1, 4, 7, -1, -1},	/* 27 MHz   */
+	{412, 16, -1, -1, 4, 7, -1, -1}		/* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+	{49, 5, 1, 1, -1, -1, -1, -1},	/* 12 MHz   */
+	{68, 8, 1, 1, -1, -1, -1, -1},	/* 13 MHz   */
+	{35, 5, 1, 1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{46, 8, 1, 1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{34, 8, 1, 1, -1, -1, -1, -1},	/* 26 MHz   */
+	{29, 7, 1, 1, -1, -1, -1, -1},	/* 27 MHz   */
+	{64, 24, 1, 1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+	750, 0, 1, 1, -1, -1, -1, -1
+};
+
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+	{80, 0, 2, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{960, 12, 2, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{400, 6, 2, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{50, 0, 2, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{480, 12, 2, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{320, 8, 2, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{25, 0, 2, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static inline u32 __get_sys_clk_index(void)
+{
+	u32 ind;
+	/*
+	 * For ES1 the ROM code calibration of sys clock is not reliable
+	 * due to hw issue. So, use hard-coded value. If this value is not
+	 * correct for any board over-ride this function in board file
+	 * From ES2.0 onwards you will get this information from
+	 * CM_SYS_CLKSEL
+	 */
+	if (omap_revision() == OMAP4430_ES1_0)
+		ind = OMAP_SYS_CLK_IND_38_4_MHZ;
+	else {
+		/* SYS_CLKSEL - 1 to match the dpll param array indices */
+		ind = (readl(&prcm->cm_sys_clksel) &
+			CM_SYS_CLKSEL_SYS_CLKSEL_MASK) - 1;
+	}
+	return ind;
+}
+
+u32 get_sys_clk_index(void)
+	__attribute__ ((weak, alias("__get_sys_clk_index")));
+
+u32 get_sys_clk_freq(void)
+{
+	u8 index = get_sys_clk_index();
+	return sys_clk_array[index];
+}
+
+static inline void do_bypass_dpll(u32 *const base)
+{
+	struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
+
+	clrsetbits_le32(&dpll_regs->cm_clkmode_dpll,
+			CM_CLKMODE_DPLL_DPLL_EN_MASK,
+			DPLL_EN_FAST_RELOCK_BYPASS <<
+			CM_CLKMODE_DPLL_EN_SHIFT);
+}
+
+static inline void wait_for_bypass(u32 *const base)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	if (!wait_on_value(ST_DPLL_CLK_MASK, 0, &dpll_regs->cm_idlest_dpll,
+				LDELAY)) {
+		printf("Bypassing DPLL failed %p\n", base);
+	}
+}
+
+static inline void do_lock_dpll(u32 *const base)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	clrsetbits_le32(&dpll_regs->cm_clkmode_dpll,
+		      CM_CLKMODE_DPLL_DPLL_EN_MASK,
+		      DPLL_EN_LOCK << CM_CLKMODE_DPLL_EN_SHIFT);
+}
+
+static inline void wait_for_lock(u32 *const base)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	if (!wait_on_value(ST_DPLL_CLK_MASK, ST_DPLL_CLK_MASK,
+		&dpll_regs->cm_idlest_dpll, LDELAY)) {
+		printf("DPLL locking failed for %p\n", base);
+		hang();
+	}
+}
+
+static void do_setup_dpll(u32 *const base, const struct dpll_params *params,
+				u8 lock)
+{
+	u32 temp;
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	bypass_dpll(base);
+
+	/* Set M & N */
+	temp = readl(&dpll_regs->cm_clksel_dpll);
+
+	temp &= ~CM_CLKSEL_DPLL_M_MASK;
+	temp |= (params->m << CM_CLKSEL_DPLL_M_SHIFT) & CM_CLKSEL_DPLL_M_MASK;
+
+	temp &= ~CM_CLKSEL_DPLL_N_MASK;
+	temp |= (params->n << CM_CLKSEL_DPLL_N_SHIFT) & CM_CLKSEL_DPLL_N_MASK;
+
+	writel(temp, &dpll_regs->cm_clksel_dpll);
+
+	/* Lock */
+	if (lock)
+		do_lock_dpll(base);
+
+	/* Setup post-dividers */
+	if (params->m2 >= 0)
+		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
+	if (params->m3 >= 0)
+		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
+	if (params->m4 >= 0)
+		writel(params->m4, &dpll_regs->cm_div_m4_dpll);
+	if (params->m5 >= 0)
+		writel(params->m5, &dpll_regs->cm_div_m5_dpll);
+	if (params->m6 >= 0)
+		writel(params->m6, &dpll_regs->cm_div_m6_dpll);
+	if (params->m7 >= 0)
+		writel(params->m7, &dpll_regs->cm_div_m7_dpll);
+
+	/* Wait till the DPLL locks */
+	if (lock)
+		wait_for_lock(base);
+}
+
+const struct dpll_params *get_core_dpll_params(void)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+
+	switch (omap_revision()) {
+	case OMAP4430_ES1_0:
+		return &core_dpll_params_es1_1524mhz[sysclk_ind];
+	case OMAP4430_ES2_0:
+	case OMAP4430_SILICON_ID_INVALID:
+		 /* safest */
+		return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind];
+	default:
+		return &core_dpll_params_1600mhz[sysclk_ind];
+	}
+}
+
+u32 omap4_ddr_clk(void)
+{
+	u32 ddr_clk, sys_clk_khz;
+	const struct dpll_params *core_dpll_params;
+
+	sys_clk_khz = get_sys_clk_freq() / 1000;
+
+	core_dpll_params = get_core_dpll_params();
+
+	debug("sys_clk %d\n ", sys_clk_khz * 1000);
+
+	/* Find Core DPLL locked frequency first */
+	ddr_clk = sys_clk_khz * 2 * core_dpll_params->m /
+			(core_dpll_params->n + 1);
+	/*
+	 * DDR frequency is PHY_ROOT_CLK/2
+	 * PHY_ROOT_CLK = Fdpll/2/M2
+	 */
+	ddr_clk = ddr_clk / 4 / core_dpll_params->m2;
+
+	ddr_clk *= 1000;	/* convert to Hz */
+	debug("ddr_clk %d\n ", ddr_clk);
+
+	return ddr_clk;
+}
+
+static void setup_dplls(void)
+{
+	u32 sysclk_ind, temp;
+	const struct dpll_params *params;
+	debug("setup_dplls\n");
+
+	sysclk_ind = get_sys_clk_index();
+
+	/* CORE dpll */
+	params = get_core_dpll_params();	/* default - safest */
+	/*
+	 * Do not lock the core DPLL now. Just set it up.
+	 * Core DPLL will be locked after setting up EMIF
+	 * using the FREQ_UPDATE method(freq_update_core())
+	 */
+	do_setup_dpll(&prcm->cm_clkmode_dpll_core, params, DPLL_NO_LOCK);
+	/* Set the ratios for CORE_CLK, L3_CLK, L4_CLK */
+	temp = (CLKSEL_CORE_X2_DIV_1 << CLKSEL_CORE_SHIFT) |
+	    (CLKSEL_L3_CORE_DIV_2 << CLKSEL_L3_SHIFT) |
+	    (CLKSEL_L4_L3_DIV_2 << CLKSEL_L4_SHIFT);
+	writel(temp, &prcm->cm_clksel_core);
+	debug("Core DPLL configured\n");
+
+	/* lock PER dpll */
+	do_setup_dpll(&prcm->cm_clkmode_dpll_per,
+			&per_dpll_params_1536mhz[sysclk_ind], DPLL_LOCK);
+	debug("PER DPLL locked\n");
+
+	/* MPU dpll */
+	if (omap_revision() == OMAP4430_ES1_0)
+		params = &mpu_dpll_params_1200mhz[sysclk_ind];
+	else
+		params = &mpu_dpll_params_1584mhz[sysclk_ind];
+	do_setup_dpll(&prcm->cm_clkmode_dpll_mpu, params, DPLL_LOCK);
+	debug("MPU DPLL locked\n");
+}
+
+static void setup_non_essential_dplls(void)
+{
+	u32 sys_clk_khz, abe_ref_clk;
+	u32 sysclk_ind, sd_div, num, den;
+	const struct dpll_params *params;
+
+	sysclk_ind = get_sys_clk_index();
+	sys_clk_khz = get_sys_clk_freq() / 1000;
+
+	/* IVA */
+	clrsetbits_le32(&prcm->cm_bypclk_dpll_iva,
+		CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2);
+
+	do_setup_dpll(&prcm->cm_clkmode_dpll_iva,
+			&iva_dpll_params_1862mhz[sysclk_ind], DPLL_LOCK);
+
+	/*
+	 * USB:
+	 * USB dpll is J-type. Need to set DPLL_SD_DIV for jitter correction
+	 * DPLL_SD_DIV = CEILING ([DPLL_MULT/(DPLL_DIV+1)]* CLKINP / 250)
+	 *      - where CLKINP is sys_clk in MHz
+	 * Use CLKINP in KHz and adjust the denominator accordingly so
+	 * that we have enough accuracy and at the same time no overflow
+	 */
+	params = &usb_dpll_params_1920mhz[sysclk_ind];
+	num = params->m * sys_clk_khz;
+	den = (params->n + 1) * 250 * 1000;
+	num += den - 1;
+	sd_div = num / den;
+	clrsetbits_le32(&prcm->cm_clksel_dpll_usb,
+			CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK,
+			sd_div << CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT);
+
+	/* Now setup the dpll with the regular function */
+	do_setup_dpll(&prcm->cm_clkmode_dpll_usb, params, DPLL_LOCK);
+
+#ifdef CONFIG_SYS_OMAP4_ABE_SYSCK
+	params = &abe_dpll_params_sysclk_196608khz[sysclk_ind];
+	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
+#else
+	params = &abe_dpll_params_32k_196608khz;
+	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK;
+	/*
+	 * We need to enable some additional options to achieve
+	 * 196.608MHz from 32768 Hz
+	 */
+	setbits_le32(&prcm->cm_clkmode_dpll_abe,
+			CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK|
+			CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK|
+			CM_CLKMODE_DPLL_LPMODE_EN_MASK|
+			CM_CLKMODE_DPLL_REGM4XEN_MASK);
+	/* Spend 4 REFCLK cycles at each stage */
+	clrsetbits_le32(&prcm->cm_clkmode_dpll_abe,
+			CM_CLKMODE_DPLL_RAMP_RATE_MASK,
+			1 << CM_CLKMODE_DPLL_RAMP_RATE_SHIFT);
+#endif
+
+	/* Select the right reference clk */
+	clrsetbits_le32(&prcm->cm_abe_pll_ref_clksel,
+			CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK,
+			abe_ref_clk << CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT);
+	/* Lock the dpll */
+	do_setup_dpll(&prcm->cm_clkmode_dpll_abe, params, DPLL_LOCK);
+}
+
+static void do_scale_vcore(u32 vcore_reg, u32 volt_mv)
+{
+	u32 temp, offset_code;
+	u32 step = 12660; /* 12.66 mV represented in uV */
+	u32 offset = volt_mv;
+
+	/* convert to uV for better accuracy in the calculations */
+	offset *= 1000;
+
+	if (omap_revision() == OMAP4430_ES1_0)
+		offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV;
+	else
+		offset -= PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV;
+
+	offset_code = (offset + step - 1) / step;
+	/* The code starts at 1 not 0 */
+	offset_code++;
+
+	debug("do_scale_vcore: volt - %d offset_code - 0x%x\n", volt_mv,
+		offset_code);
+
+	temp = SMPS_I2C_SLAVE_ADDR |
+	    (vcore_reg << PRM_VC_VAL_BYPASS_REGADDR_SHIFT) |
+	    (offset_code << PRM_VC_VAL_BYPASS_DATA_SHIFT) |
+	    PRM_VC_VAL_BYPASS_VALID_BIT;
+	writel(temp, &prcm->prm_vc_val_bypass);
+	if (!wait_on_value(PRM_VC_VAL_BYPASS_VALID_BIT, 0,
+				&prcm->prm_vc_val_bypass, LDELAY)) {
+		printf("Scaling voltage failed for 0x%x\n", vcore_reg);
+	}
+}
+
+/*
+ * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
+ * We set the maximum voltages allowed here because Smart-Reflex is not
+ * enabled in bootloader. Voltage initialization in the kernel will set
+ * these to the nominal values after enabling Smart-Reflex
+ */
+static void scale_vcores(void)
+{
+	u32 volt, sys_clk_khz, cycles_hi, cycles_low, temp;
+
+	sys_clk_khz = get_sys_clk_freq() / 1000;
+
+	/*
+	 * Setup the dedicated I2C controller for Voltage Control
+	 * I2C clk - high period 40% low period 60%
+	 */
+	cycles_hi = sys_clk_khz * 4 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
+	cycles_low = sys_clk_khz * 6 / PRM_VC_I2C_CHANNEL_FREQ_KHZ / 10;
+	/* values to be set in register - less by 5 & 7 respectively */
+	cycles_hi -= 5;
+	cycles_low -= 7;
+	temp = (cycles_hi << PRM_VC_CFG_I2C_CLK_SCLH_SHIFT) |
+	       (cycles_low << PRM_VC_CFG_I2C_CLK_SCLL_SHIFT);
+	writel(temp, &prcm->prm_vc_cfg_i2c_clk);
+
+	/* Disable high speed mode and all advanced features */
+	writel(0x0, &prcm->prm_vc_cfg_i2c_mode);
+
+	/*
+	 * VCORE 1 - 4430 : supplies vdd_mpu
+	 * Setting a high voltage for Nitro mode as smart reflex is not enabled.
+	 * We use the maximum possible value in the AVS range because the next
+	 * higher voltage in the discrete range (code >= 0b111010) is way too
+	 * high
+	 */
+	volt = 1417;
+	do_scale_vcore(SMPS_REG_ADDR_VCORE1, volt);
+
+	/* VCORE 2 - supplies vdd_iva */
+	volt = 1200;
+	do_scale_vcore(SMPS_REG_ADDR_VCORE2, volt);
+
+	/* VCORE 3 - supplies vdd_core */
+	volt = 1200;
+	do_scale_vcore(SMPS_REG_ADDR_VCORE3, volt);
+}
+
+static inline void enable_clock_domain(u32 *const clkctrl_reg, u32 enable_mode)
+{
+	clrsetbits_le32(clkctrl_reg, CD_CLKCTRL_CLKTRCTRL_MASK,
+			enable_mode << CD_CLKCTRL_CLKTRCTRL_SHIFT);
+	debug("Enable clock domain - 0x%08x\n", clkctrl_reg);
+}
+
+static inline void wait_for_clk_enable(u32 *clkctrl_addr)
+{
+	u32 clkctrl, idlest = MODULE_CLKCTRL_IDLEST_DISABLED;
+	u32 bound = LDELAY;
+
+	while ((idlest == MODULE_CLKCTRL_IDLEST_DISABLED) ||
+		(idlest == MODULE_CLKCTRL_IDLEST_TRANSITIONING)) {
+
+		clkctrl = readl(clkctrl_addr);
+		idlest = (clkctrl & MODULE_CLKCTRL_IDLEST_MASK) >>
+			 MODULE_CLKCTRL_IDLEST_SHIFT;
+		if (--bound == 0) {
+			printf("Clock enable failed for 0x%p idlest 0x%x\n",
+				clkctrl_addr, clkctrl);
+			return;
+		}
+	}
+}
+
+static inline void enable_clock_module(u32 *const clkctrl_addr, u32 enable_mode,
+				u32 wait_for_enable)
+{
+	clrsetbits_le32(clkctrl_addr, MODULE_CLKCTRL_MODULEMODE_MASK,
+			enable_mode << MODULE_CLKCTRL_MODULEMODE_SHIFT);
+	debug("Enable clock module - 0x%08x\n", clkctrl_addr);
+	if (wait_for_enable)
+		wait_for_clk_enable(clkctrl_addr);
+}
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+static void enable_basic_clocks(void)
+{
+	u32 i, max = 100, wait_for_enable = 1;
+	u32 *const clk_domains_essential[] = {
+		&prcm->cm_l4per_clkstctrl,
+		&prcm->cm_l3init_clkstctrl,
+		&prcm->cm_memif_clkstctrl,
+		&prcm->cm_l4cfg_clkstctrl,
+		0
+	};
+
+	u32 *const clk_modules_hw_auto_essential[] = {
+		&prcm->cm_wkup_gpio1_clkctrl,
+		&prcm->cm_l4per_gpio2_clkctrl,
+		&prcm->cm_l4per_gpio3_clkctrl,
+		&prcm->cm_l4per_gpio4_clkctrl,
+		&prcm->cm_l4per_gpio5_clkctrl,
+		&prcm->cm_l4per_gpio6_clkctrl,
+		&prcm->cm_memif_emif_1_clkctrl,
+		&prcm->cm_memif_emif_2_clkctrl,
+		&prcm->cm_l3init_hsusbotg_clkctrl,
+		&prcm->cm_l3init_usbphy_clkctrl,
+		&prcm->cm_l4cfg_l4_cfg_clkctrl,
+		0
+	};
+
+	u32 *const clk_modules_explicit_en_essential[] = {
+		&prcm->cm_l4per_gptimer2_clkctrl,
+		&prcm->cm_l3init_hsmmc1_clkctrl,
+		&prcm->cm_l3init_hsmmc2_clkctrl,
+		&prcm->cm_l4per_mcspi1_clkctrl,
+		&prcm->cm_wkup_gptimer1_clkctrl,
+		&prcm->cm_l4per_i2c1_clkctrl,
+		&prcm->cm_l4per_i2c2_clkctrl,
+		&prcm->cm_l4per_i2c3_clkctrl,
+		&prcm->cm_l4per_i2c4_clkctrl,
+		&prcm->cm_wkup_wdtimer2_clkctrl,
+		&prcm->cm_l4per_uart3_clkctrl,
+		0
+	};
+
+	/* Enable optional additional functional clock for GPIO4 */
+	setbits_le32(&prcm->cm_l4per_gpio4_clkctrl,
+			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable 96 MHz clock for MMC1 & MMC2 */
+	setbits_le32(&prcm->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+	setbits_le32(&prcm->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+
+	/* Select 32KHz clock as the source of GPTIMER1 */
+	setbits_le32(&prcm->cm_wkup_gptimer1_clkctrl,
+			GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+	/* Enable optional 48M functional clock for USB  PHY */
+	setbits_le32(&prcm->cm_l3init_usbphy_clkctrl,
+			USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
+
+	/* Put the clock domains in SW_WKUP mode */
+	for (i = 0; (i < max) && clk_domains_essential[i]; i++) {
+		enable_clock_domain(clk_domains_essential[i],
+				    CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+	}
+
+	/* Clock modules that need to be put in HW_AUTO */
+	for (i = 0; (i < max) && clk_modules_hw_auto_essential[i]; i++) {
+		enable_clock_module(clk_modules_hw_auto_essential[i],
+				    MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
+				    wait_for_enable);
+	};
+
+	/* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+	for (i = 0; (i < max) && clk_modules_explicit_en_essential[i]; i++) {
+		enable_clock_module(clk_modules_explicit_en_essential[i],
+				    MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+				    wait_for_enable);
+	};
+
+	/* Put the clock domains in HW_AUTO mode now */
+	for (i = 0; (i < max) && clk_domains_essential[i]; i++) {
+		enable_clock_domain(clk_domains_essential[i],
+				    CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+	}
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+static void enable_non_essential_clocks(void)
+{
+	u32 i, max = 100, wait_for_enable = 0;
+	u32 *const clk_domains_non_essential[] = {
+		&prcm->cm_mpu_m3_clkstctrl,
+		&prcm->cm_ivahd_clkstctrl,
+		&prcm->cm_dsp_clkstctrl,
+		&prcm->cm_dss_clkstctrl,
+		&prcm->cm_sgx_clkstctrl,
+		&prcm->cm1_abe_clkstctrl,
+		&prcm->cm_c2c_clkstctrl,
+		&prcm->cm_cam_clkstctrl,
+		&prcm->cm_dss_clkstctrl,
+		&prcm->cm_sdma_clkstctrl,
+		0
+	};
+
+	u32 *const clk_modules_hw_auto_non_essential[] = {
+		&prcm->cm_mpu_m3_mpu_m3_clkctrl,
+		&prcm->cm_ivahd_ivahd_clkctrl,
+		&prcm->cm_ivahd_sl2_clkctrl,
+		&prcm->cm_dsp_dsp_clkctrl,
+		&prcm->cm_l3_2_gpmc_clkctrl,
+		&prcm->cm_l3instr_l3_3_clkctrl,
+		&prcm->cm_l3instr_l3_instr_clkctrl,
+		&prcm->cm_l3instr_intrconn_wp1_clkctrl,
+		&prcm->cm_l3init_hsi_clkctrl,
+		&prcm->cm_l3init_hsusbtll_clkctrl,
+		0
+	};
+
+	u32 *const clk_modules_explicit_en_non_essential[] = {
+		&prcm->cm1_abe_aess_clkctrl,
+		&prcm->cm1_abe_pdm_clkctrl,
+		&prcm->cm1_abe_dmic_clkctrl,
+		&prcm->cm1_abe_mcasp_clkctrl,
+		&prcm->cm1_abe_mcbsp1_clkctrl,
+		&prcm->cm1_abe_mcbsp2_clkctrl,
+		&prcm->cm1_abe_mcbsp3_clkctrl,
+		&prcm->cm1_abe_slimbus_clkctrl,
+		&prcm->cm1_abe_timer5_clkctrl,
+		&prcm->cm1_abe_timer6_clkctrl,
+		&prcm->cm1_abe_timer7_clkctrl,
+		&prcm->cm1_abe_timer8_clkctrl,
+		&prcm->cm1_abe_wdt3_clkctrl,
+		&prcm->cm_l4per_gptimer9_clkctrl,
+		&prcm->cm_l4per_gptimer10_clkctrl,
+		&prcm->cm_l4per_gptimer11_clkctrl,
+		&prcm->cm_l4per_gptimer3_clkctrl,
+		&prcm->cm_l4per_gptimer4_clkctrl,
+		&prcm->cm_l4per_hdq1w_clkctrl,
+		&prcm->cm_l4per_mcbsp4_clkctrl,
+		&prcm->cm_l4per_mcspi2_clkctrl,
+		&prcm->cm_l4per_mcspi3_clkctrl,
+		&prcm->cm_l4per_mcspi4_clkctrl,
+		&prcm->cm_l4per_mmcsd3_clkctrl,
+		&prcm->cm_l4per_mmcsd4_clkctrl,
+		&prcm->cm_l4per_mmcsd5_clkctrl,
+		&prcm->cm_l4per_uart1_clkctrl,
+		&prcm->cm_l4per_uart2_clkctrl,
+		&prcm->cm_l4per_uart4_clkctrl,
+		&prcm->cm_wkup_keyboard_clkctrl,
+		&prcm->cm_wkup_wdtimer2_clkctrl,
+		&prcm->cm_cam_iss_clkctrl,
+		&prcm->cm_cam_fdif_clkctrl,
+		&prcm->cm_dss_dss_clkctrl,
+		&prcm->cm_sgx_sgx_clkctrl,
+		&prcm->cm_l3init_hsusbhost_clkctrl,
+		&prcm->cm_l3init_fsusb_clkctrl,
+		0
+	};
+
+	/* Enable optional functional clock for ISS */
+	setbits_le32(&prcm->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable all optional functional clocks of DSS */
+	setbits_le32(&prcm->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+
+	/* Put the clock domains in SW_WKUP mode */
+	for (i = 0; (i < max) && clk_domains_non_essential[i]; i++) {
+		enable_clock_domain(clk_domains_non_essential[i],
+				    CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+	}
+
+	/* Clock modules that need to be put in HW_AUTO */
+	for (i = 0; (i < max) && clk_modules_hw_auto_non_essential[i]; i++) {
+		enable_clock_module(clk_modules_hw_auto_non_essential[i],
+				    MODULE_CLKCTRL_MODULEMODE_HW_AUTO,
+				    wait_for_enable);
+	};
+
+	/* Clock modules that need to be put in SW_EXPLICIT_EN mode */
+	for (i = 0; (i < max) && clk_modules_explicit_en_non_essential[i];
+	     i++) {
+		enable_clock_module(clk_modules_explicit_en_non_essential[i],
+				    MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN,
+				    wait_for_enable);
+	};
+
+	/* Put the clock domains in HW_AUTO mode now */
+	for (i = 0; (i < max) && clk_domains_non_essential[i]; i++) {
+		enable_clock_domain(clk_domains_non_essential[i],
+				    CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+	}
+
+	/* Put camera module in no sleep mode */
+	clrsetbits_le32(&prcm->cm_cam_clkstctrl, MODULE_CLKCTRL_MODULEMODE_MASK,
+			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
+
+
+void freq_update_core(void)
+{
+	u32 freq_config1 = 0;
+	const struct dpll_params *core_dpll_params;
+
+	core_dpll_params = get_core_dpll_params();
+	/* Put EMIF clock domain in sw wakeup mode */
+	enable_clock_domain(&prcm->cm_memif_clkstctrl,
+				CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
+	wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
+	wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
+
+	freq_config1 = SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK |
+	    SHADOW_FREQ_CONFIG1_DLL_RESET_MASK;
+
+	freq_config1 |= (DPLL_EN_LOCK << SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT) &
+				SHADOW_FREQ_CONFIG1_DPLL_EN_MASK;
+
+	freq_config1 |= (core_dpll_params->m2 <<
+			SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT) &
+			SHADOW_FREQ_CONFIG1_M2_DIV_MASK;
+
+	writel(freq_config1, &prcm->cm_shadow_freq_config1);
+	if (!wait_on_value(SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK, 0,
+				&prcm->cm_shadow_freq_config1, LDELAY)) {
+		puts("FREQ UPDATE procedure failed!!");
+		hang();
+	}
+
+	/* Put EMIF clock domain back in hw auto mode */
+	enable_clock_domain(&prcm->cm_memif_clkstctrl,
+				CD_CLKCTRL_CLKTRCTRL_HW_AUTO);
+	wait_for_clk_enable(&prcm->cm_memif_emif_1_clkctrl);
+	wait_for_clk_enable(&prcm->cm_memif_emif_2_clkctrl);
+}
+
+void bypass_dpll(u32 *const base)
+{
+	do_bypass_dpll(base);
+	wait_for_bypass(base);
+}
+
+void lock_dpll(u32 *const base)
+{
+	do_lock_dpll(base);
+	wait_for_lock(base);
+}
+
+void prcm_init(void)
+{
+	switch (omap4_hw_init_context()) {
+	case OMAP_INIT_CONTEXT_SPL:
+	case OMAP_INIT_CONTEXT_UBOOT_FROM_NOR:
+	case OMAP_INIT_CONTEXT_UBOOT_AFTER_CH:
+		scale_vcores();
+		setup_dplls();
+		enable_basic_clocks();
+		setup_non_essential_dplls();
+		enable_non_essential_clocks();
+		break;
+	default:
+		break;
+	}
+}
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
new file mode 100644
index 0000000..71db39c
--- /dev/null
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -0,0 +1,664 @@
+/*
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _CLOCKS_OMAP4_H_
+#define _CLOCKS_OMAP4_H_
+#include <common.h>
+
+/*
+ * Assuming a maximum of 1.5 GHz ARM speed and a minimum of 2 cycles per
+ * loop, allow for a minimum of 2 ms wait (in reality the wait will be
+ * much more than that)
+ */
+#define LDELAY		1000000
+
+#define CM_CLKMODE_DPLL_CORE		(OMAP44XX_L4_CORE_BASE + 0x4120)
+#define CM_CLKMODE_DPLL_PER		(OMAP44XX_L4_CORE_BASE + 0x8140)
+#define CM_CLKMODE_DPLL_MPU		(OMAP44XX_L4_CORE_BASE + 0x4160)
+#define CM_CLKSEL_CORE			(OMAP44XX_L4_CORE_BASE + 0x4100)
+
+struct omap4_prcm_regs {
+	/* cm1.ckgen */
+	u32 cm_clksel_core;
+	u32 pad001[1];
+	u32 cm_clksel_abe;
+	u32 pad002[1];
+	u32 cm_dll_ctrl;
+	u32 pad003[3];
+	u32 cm_clkmode_dpll_core;
+	u32 cm_idlest_dpll_core;
+	u32 cm_autoidle_dpll_core;
+	u32 cm_clksel_dpll_core;
+	u32 cm_div_m2_dpll_core;
+	u32 cm_div_m3_dpll_core;
+	u32 cm_div_m4_dpll_core;
+	u32 cm_div_m5_dpll_core;
+	u32 cm_div_m6_dpll_core;
+	u32 cm_div_m7_dpll_core;
+	u32 cm_ssc_deltamstep_dpll_core;
+	u32 cm_ssc_modfreqdiv_dpll_core;
+	u32 cm_emu_override_dpll_core;
+	u32 pad004[3];
+	u32 cm_clkmode_dpll_mpu;
+	u32 cm_idlest_dpll_mpu;
+	u32 cm_autoidle_dpll_mpu;
+	u32 cm_clksel_dpll_mpu;
+	u32 cm_div_m2_dpll_mpu;
+	u32 pad005[5];
+	u32 cm_ssc_deltamstep_dpll_mpu;
+	u32 cm_ssc_modfreqdiv_dpll_mpu;
+	u32 pad006[3];
+	u32 cm_bypclk_dpll_mpu;
+	u32 cm_clkmode_dpll_iva;
+	u32 cm_idlest_dpll_iva;
+	u32 cm_autoidle_dpll_iva;
+	u32 cm_clksel_dpll_iva;
+	u32 pad007[2];
+	u32 cm_div_m4_dpll_iva;
+	u32 cm_div_m5_dpll_iva;
+	u32 pad008[2];
+	u32 cm_ssc_deltamstep_dpll_iva;
+	u32 cm_ssc_modfreqdiv_dpll_iva;
+	u32 pad009[3];
+	u32 cm_bypclk_dpll_iva;
+	u32 cm_clkmode_dpll_abe;
+	u32 cm_idlest_dpll_abe;
+	u32 cm_autoidle_dpll_abe;
+	u32 cm_clksel_dpll_abe;
+	u32 cm_div_m2_dpll_abe;
+	u32 cm_div_m3_dpll_abe;
+	u32 pad010[4];
+	u32 cm_ssc_deltamstep_dpll_abe;
+	u32 cm_ssc_modfreqdiv_dpll_abe;
+	u32 pad011[4];
+	u32 cm_clkmode_dpll_ddrphy;
+	u32 cm_idlest_dpll_ddrphy;
+	u32 cm_autoidle_dpll_ddrphy;
+	u32 cm_clksel_dpll_ddrphy;
+	u32 cm_div_m2_dpll_ddrphy;
+	u32 pad012[1];
+	u32 cm_div_m4_dpll_ddrphy;
+	u32 cm_div_m5_dpll_ddrphy;
+	u32 cm_div_m6_dpll_ddrphy;
+	u32 pad013[1];
+	u32 cm_ssc_deltamstep_dpll_ddrphy;
+	u32 pad014[5];
+	u32 cm_shadow_freq_config1;
+
+	/* cm1.dsp */
+	u32 pad015[103];
+	u32 cm_dsp_clkstctrl;
+	u32 pad016[7];
+	u32 cm_dsp_dsp_clkctrl;
+
+	/* cm1.abe */
+	u32 pad017[55];
+	u32 cm1_abe_clkstctrl;
+	u32 pad018[7];
+	u32 cm1_abe_l4abe_clkctrl;
+	u32 pad019[1];
+	u32 cm1_abe_aess_clkctrl;
+	u32 pad020[1];
+	u32 cm1_abe_pdm_clkctrl;
+	u32 pad021[1];
+	u32 cm1_abe_dmic_clkctrl;
+	u32 pad022[1];
+	u32 cm1_abe_mcasp_clkctrl;
+	u32 pad023[1];
+	u32 cm1_abe_mcbsp1_clkctrl;
+	u32 pad024[1];
+	u32 cm1_abe_mcbsp2_clkctrl;
+	u32 pad025[1];
+	u32 cm1_abe_mcbsp3_clkctrl;
+	u32 pad026[1];
+	u32 cm1_abe_slimbus_clkctrl;
+	u32 pad027[1];
+	u32 cm1_abe_timer5_clkctrl;
+	u32 pad028[1];
+	u32 cm1_abe_timer6_clkctrl;
+	u32 pad029[1];
+	u32 cm1_abe_timer7_clkctrl;
+	u32 pad030[1];
+	u32 cm1_abe_timer8_clkctrl;
+	u32 pad031[1];
+	u32 cm1_abe_wdt3_clkctrl;
+
+	/* cm2.ckgen */
+	u32 pad032[3805];
+	u32 cm_clksel_mpu_m3_iss_root;
+	u32 cm_clksel_usb_60mhz;
+	u32 cm_scale_fclk;
+	u32 pad033[1];
+	u32 cm_core_dvfs_perf1;
+	u32 cm_core_dvfs_perf2;
+	u32 cm_core_dvfs_perf3;
+	u32 cm_core_dvfs_perf4;
+	u32 pad034[1];
+	u32 cm_core_dvfs_current;
+	u32 cm_iva_dvfs_perf_tesla;
+	u32 cm_iva_dvfs_perf_ivahd;
+	u32 cm_iva_dvfs_perf_abe;
+	u32 pad035[1];
+	u32 cm_iva_dvfs_current;
+	u32 pad036[1];
+	u32 cm_clkmode_dpll_per;
+	u32 cm_idlest_dpll_per;
+	u32 cm_autoidle_dpll_per;
+	u32 cm_clksel_dpll_per;
+	u32 cm_div_m2_dpll_per;
+	u32 cm_div_m3_dpll_per;
+	u32 cm_div_m4_dpll_per;
+	u32 cm_div_m5_dpll_per;
+	u32 cm_div_m6_dpll_per;
+	u32 cm_div_m7_dpll_per;
+	u32 cm_ssc_deltamstep_dpll_per;
+	u32 cm_ssc_modfreqdiv_dpll_per;
+	u32 cm_emu_override_dpll_per;
+	u32 pad037[3];
+	u32 cm_clkmode_dpll_usb;
+	u32 cm_idlest_dpll_usb;
+	u32 cm_autoidle_dpll_usb;
+	u32 cm_clksel_dpll_usb;
+	u32 cm_div_m2_dpll_usb;
+	u32 pad038[5];
+	u32 cm_ssc_deltamstep_dpll_usb;
+	u32 cm_ssc_modfreqdiv_dpll_usb;
+	u32 pad039[1];
+	u32 cm_clkdcoldo_dpll_usb;
+	u32 pad040[2];
+	u32 cm_clkmode_dpll_unipro;
+	u32 cm_idlest_dpll_unipro;
+	u32 cm_autoidle_dpll_unipro;
+	u32 cm_clksel_dpll_unipro;
+	u32 cm_div_m2_dpll_unipro;
+	u32 pad041[5];
+	u32 cm_ssc_deltamstep_dpll_unipro;
+	u32 cm_ssc_modfreqdiv_dpll_unipro;
+
+	/* cm2.core */
+	u32 pad0411[324];
+	u32 cm_l3_1_clkstctrl;
+	u32 pad042[1];
+	u32 cm_l3_1_dynamicdep;
+	u32 pad043[5];
+	u32 cm_l3_1_l3_1_clkctrl;
+	u32 pad044[55];
+	u32 cm_l3_2_clkstctrl;
+	u32 pad045[1];
+	u32 cm_l3_2_dynamicdep;
+	u32 pad046[5];
+	u32 cm_l3_2_l3_2_clkctrl;
+	u32 pad047[1];
+	u32 cm_l3_2_gpmc_clkctrl;
+	u32 pad048[1];
+	u32 cm_l3_2_ocmc_ram_clkctrl;
+	u32 pad049[51];
+	u32 cm_mpu_m3_clkstctrl;
+	u32 cm_mpu_m3_staticdep;
+	u32 cm_mpu_m3_dynamicdep;
+	u32 pad050[5];
+	u32 cm_mpu_m3_mpu_m3_clkctrl;
+	u32 pad051[55];
+	u32 cm_sdma_clkstctrl;
+	u32 cm_sdma_staticdep;
+	u32 cm_sdma_dynamicdep;
+	u32 pad052[5];
+	u32 cm_sdma_sdma_clkctrl;
+	u32 pad053[55];
+	u32 cm_memif_clkstctrl;
+	u32 pad054[7];
+	u32 cm_memif_dmm_clkctrl;
+	u32 pad055[1];
+	u32 cm_memif_emif_fw_clkctrl;
+	u32 pad056[1];
+	u32 cm_memif_emif_1_clkctrl;
+	u32 pad057[1];
+	u32 cm_memif_emif_2_clkctrl;
+	u32 pad058[1];
+	u32 cm_memif_dll_clkctrl;
+	u32 pad059[3];
+	u32 cm_memif_emif_h1_clkctrl;
+	u32 pad060[1];
+	u32 cm_memif_emif_h2_clkctrl;
+	u32 pad061[1];
+	u32 cm_memif_dll_h_clkctrl;
+	u32 pad062[39];
+	u32 cm_c2c_clkstctrl;
+	u32 cm_c2c_staticdep;
+	u32 cm_c2c_dynamicdep;
+	u32 pad063[5];
+	u32 cm_c2c_sad2d_clkctrl;
+	u32 pad064[1];
+	u32 cm_c2c_modem_icr_clkctrl;
+	u32 pad065[1];
+	u32 cm_c2c_sad2d_fw_clkctrl;
+	u32 pad066[51];
+	u32 cm_l4cfg_clkstctrl;
+	u32 pad067[1];
+	u32 cm_l4cfg_dynamicdep;
+	u32 pad068[5];
+	u32 cm_l4cfg_l4_cfg_clkctrl;
+	u32 pad069[1];
+	u32 cm_l4cfg_hw_sem_clkctrl;
+	u32 pad070[1];
+	u32 cm_l4cfg_mailbox_clkctrl;
+	u32 pad071[1];
+	u32 cm_l4cfg_sar_rom_clkctrl;
+	u32 pad072[49];
+	u32 cm_l3instr_clkstctrl;
+	u32 pad073[7];
+	u32 cm_l3instr_l3_3_clkctrl;
+	u32 pad074[1];
+	u32 cm_l3instr_l3_instr_clkctrl;
+	u32 pad075[5];
+	u32 cm_l3instr_intrconn_wp1_clkctrl;
+
+
+	/* cm2.ivahd */
+	u32 pad076[47];
+	u32 cm_ivahd_clkstctrl;
+	u32 pad077[7];
+	u32 cm_ivahd_ivahd_clkctrl;
+	u32 pad078[1];
+	u32 cm_ivahd_sl2_clkctrl;
+
+	/* cm2.cam */
+	u32 pad079[53];
+	u32 cm_cam_clkstctrl;
+	u32 pad080[7];
+	u32 cm_cam_iss_clkctrl;
+	u32 pad081[1];
+	u32 cm_cam_fdif_clkctrl;
+
+	/* cm2.dss */
+	u32 pad082[53];
+	u32 cm_dss_clkstctrl;
+	u32 pad083[7];
+	u32 cm_dss_dss_clkctrl;
+
+	/* cm2.sgx */
+	u32 pad084[55];
+	u32 cm_sgx_clkstctrl;
+	u32 pad085[7];
+	u32 cm_sgx_sgx_clkctrl;
+
+	/* cm2.l3init */
+	u32 pad086[55];
+	u32 cm_l3init_clkstctrl;
+
+	/* cm2.l3init */
+	u32 pad087[9];
+	u32 cm_l3init_hsmmc1_clkctrl;
+	u32 pad088[1];
+	u32 cm_l3init_hsmmc2_clkctrl;
+	u32 pad089[1];
+	u32 cm_l3init_hsi_clkctrl;
+	u32 pad090[7];
+	u32 cm_l3init_hsusbhost_clkctrl;
+	u32 pad091[1];
+	u32 cm_l3init_hsusbotg_clkctrl;
+	u32 pad092[1];
+	u32 cm_l3init_hsusbtll_clkctrl;
+	u32 pad093[3];
+	u32 cm_l3init_p1500_clkctrl;
+	u32 pad094[21];
+	u32 cm_l3init_fsusb_clkctrl;
+	u32 pad095[3];
+	u32 cm_l3init_usbphy_clkctrl;
+
+	/* cm2.l4per */
+	u32 pad096[7];
+	u32 cm_l4per_clkstctrl;
+	u32 pad097[1];
+	u32 cm_l4per_dynamicdep;
+	u32 pad098[5];
+	u32 cm_l4per_adc_clkctrl;
+	u32 pad100[1];
+	u32 cm_l4per_gptimer10_clkctrl;
+	u32 pad101[1];
+	u32 cm_l4per_gptimer11_clkctrl;
+	u32 pad102[1];
+	u32 cm_l4per_gptimer2_clkctrl;
+	u32 pad103[1];
+	u32 cm_l4per_gptimer3_clkctrl;
+	u32 pad104[1];
+	u32 cm_l4per_gptimer4_clkctrl;
+	u32 pad105[1];
+	u32 cm_l4per_gptimer9_clkctrl;
+	u32 pad106[1];
+	u32 cm_l4per_elm_clkctrl;
+	u32 pad107[1];
+	u32 cm_l4per_gpio2_clkctrl;
+	u32 pad108[1];
+	u32 cm_l4per_gpio3_clkctrl;
+	u32 pad109[1];
+	u32 cm_l4per_gpio4_clkctrl;
+	u32 pad110[1];
+	u32 cm_l4per_gpio5_clkctrl;
+	u32 pad111[1];
+	u32 cm_l4per_gpio6_clkctrl;
+	u32 pad112[1];
+	u32 cm_l4per_hdq1w_clkctrl;
+	u32 pad113[1];
+	u32 cm_l4per_hecc1_clkctrl;
+	u32 pad114[1];
+	u32 cm_l4per_hecc2_clkctrl;
+	u32 pad115[1];
+	u32 cm_l4per_i2c1_clkctrl;
+	u32 pad116[1];
+	u32 cm_l4per_i2c2_clkctrl;
+	u32 pad117[1];
+	u32 cm_l4per_i2c3_clkctrl;
+	u32 pad118[1];
+	u32 cm_l4per_i2c4_clkctrl;
+	u32 pad119[1];
+	u32 cm_l4per_l4per_clkctrl;
+	u32 pad1191[3];
+	u32 cm_l4per_mcasp2_clkctrl;
+	u32 pad120[1];
+	u32 cm_l4per_mcasp3_clkctrl;
+	u32 pad121[1];
+	u32 cm_l4per_mcbsp4_clkctrl;
+	u32 pad122[1];
+	u32 cm_l4per_mgate_clkctrl;
+	u32 pad123[1];
+	u32 cm_l4per_mcspi1_clkctrl;
+	u32 pad124[1];
+	u32 cm_l4per_mcspi2_clkctrl;
+	u32 pad125[1];
+	u32 cm_l4per_mcspi3_clkctrl;
+	u32 pad126[1];
+	u32 cm_l4per_mcspi4_clkctrl;
+	u32 pad127[5];
+	u32 cm_l4per_mmcsd3_clkctrl;
+	u32 pad128[1];
+	u32 cm_l4per_mmcsd4_clkctrl;
+	u32 pad129[1];
+	u32 cm_l4per_msprohg_clkctrl;
+	u32 pad130[1];
+	u32 cm_l4per_slimbus2_clkctrl;
+	u32 pad131[1];
+	u32 cm_l4per_uart1_clkctrl;
+	u32 pad132[1];
+	u32 cm_l4per_uart2_clkctrl;
+	u32 pad133[1];
+	u32 cm_l4per_uart3_clkctrl;
+	u32 pad134[1];
+	u32 cm_l4per_uart4_clkctrl;
+	u32 pad135[1];
+	u32 cm_l4per_mmcsd5_clkctrl;
+	u32 pad136[1];
+	u32 cm_l4per_i2c5_clkctrl;
+	u32 pad137[5];
+	u32 cm_l4sec_clkstctrl;
+	u32 cm_l4sec_staticdep;
+	u32 cm_l4sec_dynamicdep;
+	u32 pad138[5];
+	u32 cm_l4sec_aes1_clkctrl;
+	u32 pad139[1];
+	u32 cm_l4sec_aes2_clkctrl;
+	u32 pad140[1];
+	u32 cm_l4sec_des3des_clkctrl;
+	u32 pad141[1];
+	u32 cm_l4sec_pkaeip29_clkctrl;
+	u32 pad142[1];
+	u32 cm_l4sec_rng_clkctrl;
+	u32 pad143[1];
+	u32 cm_l4sec_sha2md51_clkctrl;
+	u32 pad144[3];
+	u32 cm_l4sec_cryptodma_clkctrl;
+	u32 pad145[776841];
+
+	/* l4 wkup regs */
+	u32 pad201[6211];
+	u32 cm_abe_pll_ref_clksel;
+	u32 cm_sys_clksel;
+	u32 pad202[1467];
+	u32 cm_wkup_clkstctrl;
+	u32 pad203[7];
+	u32 cm_wkup_l4wkup_clkctrl;
+	u32 pad204;
+	u32 cm_wkup_wdtimer1_clkctrl;
+	u32 pad205;
+	u32 cm_wkup_wdtimer2_clkctrl;
+	u32 pad206;
+	u32 cm_wkup_gpio1_clkctrl;
+	u32 pad207;
+	u32 cm_wkup_gptimer1_clkctrl;
+	u32 pad208;
+	u32 cm_wkup_gptimer12_clkctrl;
+	u32 pad209;
+	u32 cm_wkup_synctimer_clkctrl;
+	u32 pad210;
+	u32 cm_wkup_usim_clkctrl;
+	u32 pad211;
+	u32 cm_wkup_sarram_clkctrl;
+	u32 pad212[5];
+	u32 cm_wkup_keyboard_clkctrl;
+	u32 pad213;
+	u32 cm_wkup_rtc_clkctrl;
+	u32 pad214;
+	u32 cm_wkup_bandgap_clkctrl;
+	u32 pad215[197];
+	u32 prm_vc_val_bypass;
+	u32 prm_vc_cfg_channel;
+	u32 prm_vc_cfg_i2c_mode;
+	u32 prm_vc_cfg_i2c_clk;
+
+};
+
+/* DPLL register offsets */
+#define CM_CLKMODE_DPLL		0
+#define CM_IDLEST_DPLL		0x4
+#define CM_AUTOIDLE_DPLL	0x8
+#define CM_CLKSEL_DPLL		0xC
+#define CM_DIV_M2_DPLL		0x10
+#define CM_DIV_M3_DPLL		0x14
+#define CM_DIV_M4_DPLL		0x18
+#define CM_DIV_M5_DPLL		0x1C
+#define CM_DIV_M6_DPLL		0x20
+#define CM_DIV_M7_DPLL		0x24
+
+#define DPLL_CLKOUT_DIV_MASK	0x1F /* post-divider mask */
+
+/* CM_CLKMODE_DPLL */
+#define CM_CLKMODE_DPLL_REGM4XEN_SHIFT		11
+#define CM_CLKMODE_DPLL_REGM4XEN_MASK		(1 << 11)
+#define CM_CLKMODE_DPLL_LPMODE_EN_SHIFT		10
+#define CM_CLKMODE_DPLL_LPMODE_EN_MASK		(1 << 10)
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_SHIFT	9
+#define CM_CLKMODE_DPLL_RELOCK_RAMP_EN_MASK	(1 << 9)
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_SHIFT	8
+#define CM_CLKMODE_DPLL_DRIFTGUARD_EN_MASK	(1 << 8)
+#define CM_CLKMODE_DPLL_RAMP_RATE_SHIFT		5
+#define CM_CLKMODE_DPLL_RAMP_RATE_MASK		(0x7 << 5)
+#define CM_CLKMODE_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_EN_MASK			(0x7 << 0)
+
+#define CM_CLKMODE_DPLL_DPLL_EN_SHIFT		0
+#define CM_CLKMODE_DPLL_DPLL_EN_MASK		7
+
+#define DPLL_EN_STOP			1
+#define DPLL_EN_MN_BYPASS		4
+#define DPLL_EN_LOW_POWER_BYPASS	5
+#define DPLL_EN_FAST_RELOCK_BYPASS	6
+#define DPLL_EN_LOCK			7
+
+/* CM_IDLEST_DPLL fields */
+#define ST_DPLL_CLK_MASK		1
+
+/* CM_CLKSEL_DPLL */
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_SHIFT	24
+#define CM_CLKSEL_DPLL_DPLL_SD_DIV_MASK		(0xFF << 24)
+#define CM_CLKSEL_DPLL_M_SHIFT			8
+#define CM_CLKSEL_DPLL_M_MASK			(0x7FF << 8)
+#define CM_CLKSEL_DPLL_N_SHIFT			0
+#define CM_CLKSEL_DPLL_N_MASK			0x7F
+
+#define OMAP4_DPLL_MAX_N	127
+
+/* CM_SYS_CLKSEL */
+#define CM_SYS_CLKSEL_SYS_CLKSEL_MASK	7
+
+/* CM_CLKSEL_CORE */
+#define CLKSEL_CORE_SHIFT	0
+#define CLKSEL_L3_SHIFT		4
+#define CLKSEL_L4_SHIFT		8
+
+#define CLKSEL_CORE_X2_DIV_1	0
+#define CLKSEL_L3_CORE_DIV_2	1
+#define CLKSEL_L4_L3_DIV_2	1
+
+/* CM_ABE_PLL_REF_CLKSEL */
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SHIFT	0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_MASK	1
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK	0
+#define CM_ABE_PLL_REF_CLKSEL_CLKSEL_32KCLK	1
+
+/* CM_BYPCLK_DPLL_IVA */
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_SHIFT		0
+#define CM_BYPCLK_DPLL_IVA_CLKSEL_MASK		3
+
+#define DPLL_IVA_CLKSEL_CORE_X2_DIV_2		1
+
+/* CM_SHADOW_FREQ_CONFIG1 */
+#define SHADOW_FREQ_CONFIG1_FREQ_UPDATE_MASK	1
+#define SHADOW_FREQ_CONFIG1_DLL_OVERRIDE_MASK	4
+#define SHADOW_FREQ_CONFIG1_DLL_RESET_MASK	8
+
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_SHIFT	8
+#define SHADOW_FREQ_CONFIG1_DPLL_EN_MASK	(7 << 8)
+
+#define SHADOW_FREQ_CONFIG1_M2_DIV_SHIFT	11
+#define SHADOW_FREQ_CONFIG1_M2_DIV_MASK		(0x1F << 11)
+
+/*CM_<clock_domain>__CLKCTRL */
+#define CD_CLKCTRL_CLKTRCTRL_SHIFT		0
+#define CD_CLKCTRL_CLKTRCTRL_MASK		3
+
+#define CD_CLKCTRL_CLKTRCTRL_NO_SLEEP		0
+#define CD_CLKCTRL_CLKTRCTRL_SW_SLEEP		1
+#define CD_CLKCTRL_CLKTRCTRL_SW_WKUP		2
+#define CD_CLKCTRL_CLKTRCTRL_HW_AUTO		3
+
+
+/* CM_<clock_domain>_<module>_CLKCTRL */
+#define MODULE_CLKCTRL_MODULEMODE_SHIFT		0
+#define MODULE_CLKCTRL_MODULEMODE_MASK		3
+#define MODULE_CLKCTRL_IDLEST_SHIFT		16
+#define MODULE_CLKCTRL_IDLEST_MASK		(3 << 16)
+
+#define MODULE_CLKCTRL_MODULEMODE_SW_DISABLE		0
+#define MODULE_CLKCTRL_MODULEMODE_HW_AUTO		1
+#define MODULE_CLKCTRL_MODULEMODE_SW_EXPLICIT_EN	2
+
+#define MODULE_CLKCTRL_IDLEST_FULLY_FUNCTIONAL	0
+#define MODULE_CLKCTRL_IDLEST_TRANSITIONING	1
+#define MODULE_CLKCTRL_IDLEST_IDLE		2
+#define MODULE_CLKCTRL_IDLEST_DISABLED		3
+
+/* CM_L4PER_GPIO4_CLKCTRL */
+#define GPIO4_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_L3INIT_HSMMCn_CLKCTRL */
+#define HSMMC_CLKCTRL_CLKSEL_MASK		(1 << 24)
+
+/* CM_WKUP_GPTIMER1_CLKCTRL */
+#define GPTIMER1_CLKCTRL_CLKSEL_MASK		(1 << 24)
+
+/* CM_CAM_ISS_CLKCTRL */
+#define ISS_CLKCTRL_OPTFCLKEN_MASK		(1 << 8)
+
+/* CM_DSS_DSS_CLKCTRL */
+#define DSS_CLKCTRL_OPTFCLKEN_MASK		0xF00
+
+/* CM_L3INIT_USBPHY_CLKCTRL */
+#define USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK	8
+
+/* Clock frequencies */
+#define OMAP_SYS_CLK_FREQ_38_4_MHZ	38400000
+#define OMAP_SYS_CLK_IND_38_4_MHZ	6
+#define OMAP_32K_CLK_FREQ		32768
+
+/* PRM_VC_CFG_I2C_CLK */
+#define PRM_VC_CFG_I2C_CLK_SCLH_SHIFT		0
+#define PRM_VC_CFG_I2C_CLK_SCLH_MASK		0xFF
+#define PRM_VC_CFG_I2C_CLK_SCLL_SHIFT		8
+#define PRM_VC_CFG_I2C_CLK_SCLL_MASK		(0xFF << 8)
+
+/* PRM_VC_VAL_BYPASS */
+#define PRM_VC_I2C_CHANNEL_FREQ_KHZ	400
+
+#define PRM_VC_VAL_BYPASS_VALID_BIT	0x1000000
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_SHIFT	0
+#define PRM_VC_VAL_BYPASS_SLAVEADDR_MASK	0x7F
+#define PRM_VC_VAL_BYPASS_REGADDR_SHIFT		8
+#define PRM_VC_VAL_BYPASS_REGADDR_MASK		0xFF
+#define PRM_VC_VAL_BYPASS_DATA_SHIFT		16
+#define PRM_VC_VAL_BYPASS_DATA_MASK		0xFF
+
+#define SMPS_I2C_SLAVE_ADDR	0x12
+#define SMPS_REG_ADDR_VCORE1	0x55
+#define SMPS_REG_ADDR_VCORE2	0x5B
+#define SMPS_REG_ADDR_VCORE3	0x61
+
+#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_UV		607700
+#define PHOENIX_SMPS_BASE_VOLT_STD_MODE_WITH_OFFSET_UV	709000
+
+/* Defines for DPLL setup */
+#define DPLL_LOCKED_FREQ_TOLERANCE_0		0
+#define DPLL_LOCKED_FREQ_TOLERANCE_500_KHZ	500
+#define DPLL_LOCKED_FREQ_TOLERANCE_1_MHZ	1000
+
+#define DPLL_NO_LOCK	0
+#define DPLL_LOCK	1
+
+#define NUM_SYS_CLKS	7
+
+struct dpll_regs {
+	u32 cm_clkmode_dpll;
+	u32 cm_idlest_dpll;
+	u32 cm_autoidle_dpll;
+	u32 cm_clksel_dpll;
+	u32 cm_div_m2_dpll;
+	u32 cm_div_m3_dpll;
+	u32 cm_div_m4_dpll;
+	u32 cm_div_m5_dpll;
+	u32 cm_div_m6_dpll;
+	u32 cm_div_m7_dpll;
+};
+
+/* DPLL parameter table */
+struct dpll_params {
+	u32 m;
+	u32 n;
+	u8 m2;
+	u8 m3;
+	u8 m4;
+	u8 m5;
+	u8 m6;
+	u8 m7;
+};
+
+#endif /* _CLOCKS_OMAP4_H_ */
diff --git a/arch/arm/include/asm/arch-omap4/sys_proto.h b/arch/arm/include/asm/arch-omap4/sys_proto.h
index c10fa18..f871921 100644
--- a/arch/arm/include/asm/arch-omap4/sys_proto.h
+++ b/arch/arm/include/asm/arch-omap4/sys_proto.h
@@ -22,6 +22,7 @@
 #define _SYS_PROTO_H_
 
 #include <asm/arch/omap4.h>
+#include <asm/arch/clocks.h>
 #include <asm/io.h>
 #include <asm/omap_common.h>
 #include <asm/arch/mux_omap4.h>
@@ -31,6 +32,8 @@
 };
 extern const struct omap_sysinfo sysinfo;
 
+extern struct omap4_prcm_regs *const prcm;
+
 void gpmc_init(void);
 void watchdog_init(void);
 u32 get_device_type(void);
@@ -41,6 +44,11 @@
 void sdelay(unsigned long);
 void set_pl310_ctrl_reg(u32 val);
 void omap_rev_string(char *omap4_rev_string);
+void prcm_init(void);
+void bypass_dpll(u32 *const base);
+void freq_update_core(void);
+u32 get_sys_clk_freq(void);
+u32 omap4_ddr_clk(void);
 
 static inline u32 running_from_sdram(void)
 {
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index d80f665..33caa4e 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -25,6 +25,9 @@
 #ifndef	_OMAP_COMMON_H_
 #define	_OMAP_COMMON_H_
 
+/* Max value for DPLL multiplier M */
+#define OMAP_DPLL_MAX_N	127
+
 /* HW Init Context */
 #define OMAP_INIT_CONTEXT_SPL			0
 #define OMAP_INIT_CONTEXT_UBOOT_FROM_NOR	1
diff --git a/tools/omap/clocks_get_m_n.c b/tools/omap/clocks_get_m_n.c
new file mode 100644
index 0000000..cfc1760
--- /dev/null
+++ b/tools/omap/clocks_get_m_n.c
@@ -0,0 +1,197 @@
+/*
+ * Program for finding M & N values for DPLLs
+ * To be run on Host PC
+ *
+ * (C) Copyright 2010
+ * Texas Instruments, <www.ti.com>
+ *
+ * Aneesh V <aneesh@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <stdlib.h>
+#include <stdio.h>
+typedef unsigned int u32;
+#define MAX_N	127
+
+/*
+ * get_m_n_optimized() - Finds optimal DPLL multiplier(M) and divider(N)
+ * values based on the reference frequency, required output frequency,
+ * maximum tolerance for output frequency etc.
+ *
+ * target_freq_khz - output frequency required in KHz
+ * ref_freq_khz - reference(input) frequency in KHz
+ * m - pointer to computed M value
+ * n - pointer to computed N value
+ * tolerance_khz - tolerance for the output frequency. When the algorithm
+ * succeeds in finding vialble M and N values the corresponding output
+ * frequency will be in the range:
+ *	[target_freq_khz - tolerance_khz, target_freq_khz]
+ *
+ * Formula:
+ *	Fdpll = (2 * M * Fref) / (N + 1)
+ *
+ * Considerations for lock-time:
+ *	- Smaller the N, better lock-time, especially lock-time will be
+ *	- For acceptable lock-times:
+ *		Fref / (M + 1) >= 1 MHz
+ *
+ * Considerations for power:
+ *	- The difference in power for different N values giving the same
+ *	  output is negligible. So, we optimize for lock-time
+ *
+ * Hard-constraints:
+ *	- N can not be greater than 127(7 bit field for representing N)
+ *
+ * Usage:
+ *	$ gcc clocks_get_m_n.c
+ *	$ ./a.out
+ */
+int get_m_n_optimized(u32 target_freq_khz, u32 ref_freq_khz, u32 *m, u32 *n,
+			u32 tolerance_khz)
+{
+	u32 min_freq = target_freq_khz - tolerance_khz;
+	u32 max_freq = target_freq_khz;
+	u32 freq, freq_old;
+	*n = 1;
+	while (1) {
+		*m = min_freq / ref_freq_khz / 2 * (*n) ;
+		freq_old = 0;
+		while (1) {
+			freq = ref_freq_khz * 2 * (*m) / (*n);
+			if (abs(target_freq_khz - freq_old) <=
+				abs(target_freq_khz - freq)) {
+				freq = freq_old;
+				(*m)--;
+				break;
+			}
+			(*m)++;
+			freq_old = freq;
+		}
+		if (freq >= min_freq && freq <= max_freq)
+			break;
+		(*n)++;
+		if ((*n) > MAX_N + 1) {
+			printf("ref %d m %d n %d target %d : ",
+				ref_freq_khz, *m, *n, target_freq_khz);
+			printf("can not find m & n - please consider"
+				" increasing tolerance\n");
+			return -1;
+		}
+	}
+	(*n)--;
+	printf("ref %d m %d n %d target %d locked %d\n",
+		ref_freq_khz, *m, *n, target_freq_khz, freq);
+	if ((ref_freq_khz / (*n + 1)) < 1000) {
+		printf("\tREFCLK - CLKINP/(N+1) is less than 1 MHz - less than"
+			" ideal, locking time will be high!\n");
+	}
+	return 0;
+}
+
+void main(void)
+{
+	u32 m, n;
+	printf("\nMPU - 2000000\n");
+	get_m_n_optimized(2000000, 12000, &m, &n, 0);
+	get_m_n_optimized(2000000, 13000, &m, &n, 0);
+	get_m_n_optimized(2000000, 16800, &m, &n, 800);
+	get_m_n_optimized(2000000, 19200, &m, &n, 0);
+	get_m_n_optimized(2000000, 26000, &m, &n, 0);
+	get_m_n_optimized(2000000, 27000, &m, &n, 0);
+	get_m_n_optimized(2000000, 38400, &m, &n, 0);
+
+	printf("\nMPU - 1200000\n");
+	get_m_n_optimized(1200000, 12000, &m, &n, 0);
+	get_m_n_optimized(1200000, 13000, &m, &n, 0);
+	get_m_n_optimized(1200000, 16800, &m, &n, 800);
+	get_m_n_optimized(1200000, 19200, &m, &n, 0);
+	get_m_n_optimized(1200000, 26000, &m, &n, 0);
+	get_m_n_optimized(1200000, 27000, &m, &n, 0);
+	get_m_n_optimized(1200000, 38400, &m, &n, 0);
+
+	printf("\nMPU - 1584000\n");
+	get_m_n_optimized(1584000, 12000, &m, &n, 0);
+	get_m_n_optimized(1584000, 13000, &m, &n, 0);
+	get_m_n_optimized(1584000, 16800, &m, &n, 400);
+	get_m_n_optimized(1584000, 19200, &m, &n, 0);
+	get_m_n_optimized(1584000, 26000, &m, &n, 0);
+	get_m_n_optimized(1584000, 27000, &m, &n, 0);
+	get_m_n_optimized(1584000, 38400, &m, &n, 0);
+
+	printf("\nCore 1600000\n");
+	get_m_n_optimized(1600000, 12000, &m, &n, 0);
+	get_m_n_optimized(1600000, 13000, &m, &n, 0);
+	get_m_n_optimized(1600000, 16800, &m, &n, 200);
+	get_m_n_optimized(1600000, 19200, &m, &n, 0);
+	get_m_n_optimized(1600000, 26000, &m, &n, 0);
+	get_m_n_optimized(1600000, 27000, &m, &n, 0);
+	get_m_n_optimized(1600000, 38400, &m, &n, 0);
+
+	printf("\nPER 1536000\n");
+	get_m_n_optimized(1536000, 12000, &m, &n, 0);
+	get_m_n_optimized(1536000, 13000, &m, &n, 0);
+	get_m_n_optimized(1536000, 16800, &m, &n, 0);
+	get_m_n_optimized(1536000, 19200, &m, &n, 0);
+	get_m_n_optimized(1536000, 26000, &m, &n, 0);
+	get_m_n_optimized(1536000, 27000, &m, &n, 0);
+	get_m_n_optimized(1536000, 38400, &m, &n, 0);
+
+	printf("\nIVA 1862000\n");
+	get_m_n_optimized(1862000, 12000, &m, &n, 0);
+	get_m_n_optimized(1862000, 13000, &m, &n, 0);
+	get_m_n_optimized(1862000, 16800, &m, &n, 0);
+	get_m_n_optimized(1862000, 19200, &m, &n, 900);
+	get_m_n_optimized(1862000, 26000, &m, &n, 0);
+	get_m_n_optimized(1862000, 27000, &m, &n, 0);
+	get_m_n_optimized(1862000, 38400, &m, &n, 800);
+
+	printf("\nABE 196608 sys clk\n");
+	get_m_n_optimized(196608, 12000, &m, &n, 700);
+	get_m_n_optimized(196608, 13000, &m, &n, 200);
+	get_m_n_optimized(196608, 16800, &m, &n, 700);
+	get_m_n_optimized(196608, 19200, &m, &n, 400);
+	get_m_n_optimized(196608, 26000, &m, &n, 200);
+	get_m_n_optimized(196608, 27000, &m, &n, 900);
+	get_m_n_optimized(196608, 38400, &m, &n, 0);
+
+	printf("\nABE 196608 32K\n");
+	get_m_n_optimized(196608000/4, 32768, &m, &n, 0);
+
+	printf("\nUSB 1920000\n");
+	get_m_n_optimized(1920000, 12000, &m, &n, 0);
+	get_m_n_optimized(1920000, 13000, &m, &n, 0);
+	get_m_n_optimized(1920000, 16800, &m, &n, 0);
+	get_m_n_optimized(1920000, 19200, &m, &n, 0);
+	get_m_n_optimized(1920000, 26000, &m, &n, 0);
+	get_m_n_optimized(1920000, 27000, &m, &n, 0);
+	get_m_n_optimized(1920000, 38400, &m, &n, 0);
+
+	printf("\nCore ES1 1523712\n");
+	get_m_n_optimized(1524000, 12000, &m, &n, 100);
+	get_m_n_optimized(1524000, 13000, &m, &n, 0);
+	get_m_n_optimized(1524000, 16800, &m, &n, 0);
+	get_m_n_optimized(1524000, 19200, &m, &n, 0);
+	get_m_n_optimized(1524000, 26000, &m, &n, 0);
+	get_m_n_optimized(1524000, 27000, &m, &n, 0);
+
+	/* exact recommendation for SDPs */
+	get_m_n_optimized(1523712, 38400, &m, &n, 0);
+
+}