diff --git a/.gitignore b/.gitignore
index d91e91b..1ac43f2 100644
--- a/.gitignore
+++ b/.gitignore
@@ -38,6 +38,7 @@
 /u-boot.sha1
 /u-boot.dis
 /u-boot.lds
+/u-boot.lst
 /u-boot.ubl
 /u-boot.ais
 /u-boot.dtb
diff --git a/CREDITS b/CREDITS
index fa9a14e..7c1458f 100644
--- a/CREDITS
+++ b/CREDITS
@@ -79,11 +79,6 @@
 E: obrown@adventnetworks.com
 D: Port to the gw8260 board
 
-N: Curt Brune
-E: curt@cucy.com
-D: Added support for Samsung S3C4510B CPU (ARM7tdmi based SoC)
-W: http://www.cucy.com
-
 N: Jonathan De Bruyne
 E: jonathan.debruyne@siemens.atea.be
 D: Port to Siemens IAD210 board
diff --git a/MAINTAINERS b/MAINTAINERS
index 311c0e7..e34d9f3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -104,8 +104,6 @@
 
 	ARIA		MPC5121e
 
-	AMX860		MPC860
-	ETX094		MPC850
 	FPS850L		MPC850
 	FPS860L		MPC860
 	ICU862		MPC862
@@ -116,7 +114,6 @@
 	IVMS8		MPC860
 	IVMS8_128	MPC860
 	IVMS8_256	MPC860
-	LANTEC		MPC850
 	LWMON		MPC823
 	R360MPI		MPC823
 	RRvision	MPC823
@@ -128,7 +125,6 @@
 	TQM855L		MPC855
 	TQM860L		MPC860
 	TQM860L_FEC	MPC860
-	c2mon		MPC855
 	hermes		MPC860
 	lwmon		MPC823
 
@@ -214,9 +210,7 @@
 Paul Gortmaker <paul.gortmaker@windriver.com>
 
 	sbc8349		MPC8349
-	sbc8540		MPC8540
 	sbc8548		MPC8548
-	sbc8560		MPC8560
 	sbc8641d	MPC8641D
 
 Frank Gottschling <fgottschling@eltec.de>
@@ -229,7 +223,6 @@
 
 	PN62		MPC8240
 	IPHASE4539	MPC8260
-	SCM		MPC8260
 
 Anatolij Gustschin <agust@denx.de>
 
@@ -545,7 +538,6 @@
 	FADS850SAR	MPC8xx
 	FADS860T	MPC8xx
 	GENIETV		MPC8xx
-	IAD210		MPC8xx
 	MBX		MPC8xx
 	MBX860T		MPC8xx
 	NX823		MPC8xx
@@ -573,6 +565,10 @@
 
 	edminiv2	ARM926EJS (Orion5x SoC)
 
+Raphael Assenat <raph@8d.com>
+
+	eco5pk		ARM ARMV7 (AM35x SoC)
+
 Stefano Babic <sbabic@denx.de>
 
 	ea20		davinci
@@ -586,6 +582,10 @@
  	vision2		i.MX51
 	woodburn	i.MX35
 
+Lukasz Dalek <luk0104@gmail.com>
+
+	h2200		xscale/pxa
+
 Jason Liu <r64343@freescale.com>
 
 	mx53evk         i.MX53
@@ -901,6 +901,10 @@
 
 	zynq		ARM ARMV7 (Zynq SoC)
 
+Lucas Stach <dev@lynxeye.de>
+
+	colibri_t20_iris	Tegra20 (ARM7 & A9 Dual Core)
+
 Nick Thompson <nick.thompson@gefanuc.com>
 
 	da830evm	ARM926EJS (DA830/OMAP-L137)
@@ -1010,6 +1014,10 @@
 
 	armadillo-800eva	R8A7740 (RMOBILE SoC)
 
+Pali Rohár <pali.rohar@gmail.com>
+
+	nokia_rx51	ARM ARMV7 (OMAP34xx SoC)
+
 -------------------------------------------------------------------------
 
 Unknown / orphaned boards:
diff --git a/MAKEALL b/MAKEALL
index 63f8bef..84a5c92 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -640,7 +640,7 @@
 	fi
 
 	if [ $BUILD_MANY == 1 ] ; then
-		${MAKE} tidy
+		${MAKE} -s tidy
 
 		if [ -s ${LOG_DIR}/${target}.ERR ] ; then
 			cp ${LOG_DIR}/${target}.ERR ${OUTPUT_PREFIX}/ERR/${target}
diff --git a/Makefile b/Makefile
index 249b109..4fc6a82 100644
--- a/Makefile
+++ b/Makefile
@@ -21,10 +21,10 @@
 # MA 02111-1307 USA
 #
 
-VERSION = 2012
-PATCHLEVEL = 10
+VERSION = 2013
+PATCHLEVEL = 01
 SUBLEVEL =
-EXTRAVERSION =
+EXTRAVERSION = -rc1
 ifneq "$(SUBLEVEL)" ""
 U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
 else
@@ -260,7 +260,9 @@
 endif
 LIBS-$(CONFIG_OF_EMBED) += dts/libdts.o
 LIBS-y += arch/$(ARCH)/lib/lib$(ARCH).o
-LIBS-y += fs/cramfs/libcramfs.o \
+LIBS-y += fs/libfs.o \
+	fs/cbfs/libcbfs.o \
+	fs/cramfs/libcramfs.o \
 	fs/ext4/libext4fs.o \
 	fs/fat/libfat.o \
 	fs/fdos/libfdos.o \
@@ -514,16 +516,17 @@
 
 ifeq ($(SOC),tegra20)
 ifeq ($(CONFIG_OF_SEPARATE),y)
-$(obj)u-boot-dtb-tegra.bin:	$(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(obj)u-boot.dtb
-		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(obj)u-boot.dtb > $@
-		rm $(obj)spl/u-boot-spl-pad.bin
+nodtb=dtb
+dtbfile=$(obj)u-boot.dtb
 else
-$(obj)u-boot-nodtb-tegra.bin:	$(obj)spl/u-boot-spl.bin $(obj)u-boot.bin
-		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
-		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin > $@
-		rm $(obj)spl/u-boot-spl-pad.bin
+nodtb=nodtb
+dtbfile=
 endif
+
+$(obj)u-boot-$(nodtb)-tegra.bin: $(obj)spl/u-boot-spl.bin $(obj)u-boot.bin $(dtbfile)
+		$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(CONFIG_SYS_TEXT_BASE) -O binary $(obj)spl/u-boot-spl $(obj)spl/u-boot-spl-pad.bin
+		cat $(obj)spl/u-boot-spl-pad.bin $(obj)u-boot.bin $(dtbfile) > $@
+		rm $(obj)spl/u-boot-spl-pad.bin
 endif
 
 ifeq ($(CONFIG_SANDBOX),y)
@@ -533,9 +536,10 @@
 			$(PLATFORM_LIBS) -Wl,-Map -Wl,u-boot.map -o u-boot
 else
 GEN_UBOOT = \
-		UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
-		sed  -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
-		cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) $$UNDEF_SYM $(__OBJS) \
+		UNDEF_LST=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \
+		sed  -n -e 's/.*\($(SYM_PREFIX)_u_boot_list_.*\)/-u\1/p'|sort|uniq`;\
+		cd $(LNDIR) && $(LD) $(LDFLAGS) $(LDFLAGS_$(@F)) \
+			$$UNDEF_LST $(__OBJS) \
 			--start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
 			-Map u-boot.map -o u-boot
 endif
@@ -568,8 +572,12 @@
 $(LDSCRIPT):	depend
 		$(MAKE) -C $(dir $@) $(notdir $@)
 
-$(obj)u-boot.lds: $(LDSCRIPT)
-		$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates u-boot.lst,
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(obj)include/u-boot.lst, $(LIBBOARD) $(LIBS)))
+$(obj)u-boot.lds: $(LDSCRIPT) $(obj)include/u-boot.lst
+		$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 nand_spl:	$(TIMESTAMP_FILE) $(VERSION_FILE) depend
 		$(MAKE) -C nand_spl/board/$(BOARDDIR) all
@@ -748,20 +756,6 @@
 lcname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/')
 ucname	= $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/')
 
-#========================================================================
-# ARM
-#========================================================================
-
-SX1_stdout_serial_config \
-SX1_config:		unconfig
-	@mkdir -p $(obj)include
-	@if [ "$(findstring _stdout_serial_, $@)" ] ; then \
-		echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
-	else \
-		echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \
-	fi;
-	@$(MKCONFIG) -n $@ SX1 arm arm925t sx1
-
 #########################################################################
 ## ARM1176 Systems
 #########################################################################
@@ -808,6 +802,7 @@
 	       $(obj)board/matrix_vision/*/bootscript.img		  \
 	       $(obj)board/voiceblue/eeprom 				  \
 	       $(obj)u-boot.lds						  \
+	       $(obj)include/u-boot.lst			  		  \
 	       $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs]	  \
 	       $(obj)arch/blackfin/cpu/init.{lds,elf}
 	@rm -f $(obj)include/bmp_logo.h
@@ -841,8 +836,10 @@
 	@rm -f $(obj)u-boot.dtb
 	@rm -f $(obj)u-boot.sb
 	@rm -f $(obj)u-boot.spr
-	@rm -f $(obj)nand_spl/{u-boot.lds,u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map,System.map}
-	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.lds,u-boot-spl.map}
+	@rm -f $(obj)nand_spl/{u-boot.{lds,lst},System.map}
+	@rm -f $(obj)nand_spl/{u-boot-nand_spl.lds,u-boot-spl,u-boot-spl.map}
+	@rm -f $(obj)spl/{u-boot-spl,u-boot-spl.bin,u-boot-spl.map}
+	@rm -f $(obj)spl/{u-boot-spl.lds,u-boot.lst}
 	@rm -f $(obj)MLO
 	@rm -f $(obj)SPL
 	@rm -f $(obj)tools/xway-swap-bytes
diff --git a/README b/README
index df4aed1..afdf591 100644
--- a/README
+++ b/README
@@ -363,6 +363,12 @@
 		ICache only when Code runs from RAM.
 
 - 85xx CPU Options:
+		CONFIG_SYS_PPC64
+
+		Specifies that the core is a 64-bit PowerPC implementation (implements
+		the "64" category of the Power ISA). This is necessary for ePAPR
+		compliance, among other possible reasons.
+
 		CONFIG_SYS_FSL_TBCLK_DIV
 
 		Defines the core time base clock divider ratio compared to the
@@ -655,6 +661,10 @@
 						additional board info beside
 						the logo
 
+		When CONFIG_CFB_CONSOLE_ANSI is defined, console will support
+		a limited number of ANSI escape sequences (cursor control,
+		erase functions and limited graphics rendition control).
+
 		When CONFIG_CFB_CONSOLE is defined, video console is
 		default i/o. Serial console can be forced with
 		environment 'console=serial'.
@@ -801,9 +811,11 @@
 		CONFIG_CMD_EEPROM	* EEPROM read/write support
 		CONFIG_CMD_ELF		* bootelf, bootvx
 		CONFIG_CMD_EXPORTENV	* export the environment
+		CONFIG_CMD_EXT2		* ext2 command support
+		CONFIG_CMD_EXT4		* ext4 command support
 		CONFIG_CMD_SAVEENV	  saveenv
 		CONFIG_CMD_FDC		* Floppy Disk Support
-		CONFIG_CMD_FAT		* FAT partition support
+		CONFIG_CMD_FAT		* FAT command support
 		CONFIG_CMD_FDOS		* Dos diskette Support
 		CONFIG_CMD_FLASH	  flinfo, erase, protect
 		CONFIG_CMD_FPGA		  FPGA device initialization support
@@ -1033,6 +1045,9 @@
 		devices.
 		CONFIG_SYS_SCSI_SYM53C8XX_CCF to fix clock timing (80Mhz)
 
+                The environment variable 'scsidevs' is set to the number of
+                SCSI devices found during the last scan.
+
 - NETWORK Support (PCI):
 		CONFIG_E1000
 		Support for Intel 8254x/8257x gigabit chips.
@@ -1084,7 +1099,7 @@
 		CONFIG_CALXEDA_XGMAC
 		Support for the Calxeda XGMAC device
 
-		CONFIG_DRIVER_LAN91C96
+		CONFIG_LAN91C96
 		Support for SMSC's LAN91C96 chips.
 
 			CONFIG_LAN91C96_BASE
@@ -1094,7 +1109,7 @@
 			CONFIG_LAN91C96_USE_32_BIT
 			Define this to enable 32 bit addressing
 
-		CONFIG_DRIVER_SMC91111
+		CONFIG_SMC91111
 		Support for SMSC's LAN91C111 chip
 
 			CONFIG_SMC91111_BASE
@@ -1316,6 +1331,13 @@
 		This will also enable the command "fatwrite" enabling the
 		user to write files to FAT.
 
+CBFS (Coreboot Filesystem) support
+		CONFIG_CMD_CBFS
+
+		Define this to enable support for reading from a Coreboot
+		filesystem. Available commands are cbfsinit, cbfsinfo, cbfsls
+		and cbfsload.
+
 - Keyboard Support:
 		CONFIG_ISA_KEYBOARD
 
@@ -2169,8 +2191,8 @@
 		following board configurations are known to be
 		"pRAM-clean":
 
-			ETX094, IVMS8, IVML24, SPD8xx, TQM8xxL,
-			HERMES, IP860, RPXlite, LWMON, LANTEC,
+			IVMS8, IVML24, SPD8xx, TQM8xxL,
+			HERMES, IP860, RPXlite, LWMON,
 			FLAGADM, TQM8260
 
 - Error Recovery:
@@ -2296,6 +2318,12 @@
 		- CONFIG_SYS_VENDOR
 		- CONFIG_SYS_SOC
 
+		CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+
+		Define this in order to add variables describing certain
+		run-time determined information about the hardware to the
+		environment.  These will be named board_name, board_rev.
+
 - DataFlash Support:
 		CONFIG_HAS_DATAFLASH
 
diff --git a/arch/arm/cpu/arm1176/tnetv107x/Makefile b/arch/arm/cpu/arm1176/tnetv107x/Makefile
index c63dc92..c1d4d67 100644
--- a/arch/arm/cpu/arm1176/tnetv107x/Makefile
+++ b/arch/arm/cpu/arm1176/tnetv107x/Makefile
@@ -21,7 +21,7 @@
 
 LIB	= $(obj)lib$(SOC).o
 
-COBJS	+= aemif.o clock.o init.o mux.o timer.o wdt.o
+COBJS	+= aemif.o clock.o init.o mux.o timer.o
 SOBJS	+= lowlevel_init.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/arm1176/tnetv107x/clock.c b/arch/arm/cpu/arm1176/tnetv107x/clock.c
index e26fec1..16876ae 100644
--- a/arch/arm/cpu/arm1176/tnetv107x/clock.c
+++ b/arch/arm/cpu/arm1176/tnetv107x/clock.c
@@ -168,10 +168,6 @@
 #define tdm_extra_clk		{TDM_PLL, 1}
 #define tdm1_clk		{TDM_PLL, 2}
 
-/* Optimization barrier */
-#define barrier()	\
-	__asm__ __volatile__("mov r0, r0\n" : : : "memory");
-
 static const struct lpsc_map lpsc_clk_map[] = {
 	[TNETV107X_LPSC_ARM]			= sys_arm1176_clk,
 	[TNETV107X_LPSC_GEM]			= sys_dsp_clk,
diff --git a/arch/arm/cpu/arm720t/cpu.c b/arch/arm/cpu/arm720t/cpu.c
index ce7b3c9..820614e 100644
--- a/arch/arm/cpu/arm720t/cpu.c
+++ b/arch/arm/cpu/arm720t/cpu.c
@@ -27,34 +27,12 @@
  */
 
 /*
- * CPU specific code
+ * cleanup_before_linux() - Prepare the CPU to jump to Linux
+ *
+ * This function is called just before we call Linux, it
+ * prepares the processor for linux
  */
-
-#include <common.h>
-#include <command.h>
-#include <clps7111.h>
-#include <asm/hardware.h>
-#include <asm/system.h>
-
-int cleanup_before_linux (void)
+int cleanup_before_linux(void)
 {
-	/*
-	 * this function is called just before we call linux
-	 * it prepares the processor for linux
-	 *
-	 * we turn off caches etc ...
-	 * and we set the CPU-speed to 73 MHz - see start.S for details
-	 */
-
-#if defined(CONFIG_NETARM) || defined(CONFIG_S3C4510B) || defined(CONFIG_LPC2292)
-	disable_interrupts ();
-	/* Nothing more needed */
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* No cleanup before linux for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_TEGRA)
-	/* No cleanup before linux for tegra as yet */
-#else
-#error No cleanup_before_linux() defined for this CPU type
-#endif
 	return 0;
 }
diff --git a/arch/arm/cpu/arm720t/interrupts.c b/arch/arm/cpu/arm720t/interrupts.c
index c2f898f..623a24b 100644
--- a/arch/arm/cpu/arm720t/interrupts.c
+++ b/arch/arm/cpu/arm720t/interrupts.c
@@ -27,266 +27,23 @@
  */
 
 #include <common.h>
-#include <clps7111.h>
-#include <asm/proc-armv/ptrace.h>
-#include <asm/hardware.h>
-
-#ifndef CONFIG_NETARM
-/* we always count down the max. */
-#define TIMER_LOAD_VAL 0xffff
-/* macro to read the 16 bit timer */
-#define READ_TIMER (IO_TC1D & 0xffff)
-
-#ifdef CONFIG_LPC2292
-#undef READ_TIMER
-#define READ_TIMER (0xFFFFFFFF - GET32(T0TC))
-#endif
-
-#else
-#define IRQEN	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_INTR_ENABLE))
-#define TM2CTRL (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_CONTROL))
-#define TM2STAT (*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_TIMER2_STATUS))
-#define TIMER_LOAD_VAL NETARM_GEN_TSTAT_CTC_MASK
-#define READ_TIMER (TM2STAT & NETARM_GEN_TSTAT_CTC_MASK)
-#endif
-
-#ifdef CONFIG_S3C4510B
-/* require interrupts for the S3C4510B */
-# ifndef CONFIG_USE_IRQ
-#  error CONFIG_USE_IRQ _must_ be defined when using CONFIG_S3C4510B
-# else
-static struct _irq_handler IRQ_HANDLER[N_IRQS];
-# endif
-#endif	/* CONFIG_S3C4510B */
 
 #ifdef CONFIG_USE_IRQ
 void do_irq (struct pt_regs *pt_regs)
 {
-#if defined(CONFIG_S3C4510B)
-	unsigned int pending;
-
-	while ( (pending = GET_REG( REG_INTOFFSET)) != 0x54) {  /* sentinal value for no pending interrutps */
-		IRQ_HANDLER[pending>>2].m_func( IRQ_HANDLER[pending>>2].m_data);
-
-		/* clear pending interrupt */
-		PUT_REG( REG_INTPEND, (1<<(pending>>2)));
-	}
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* No do_irq() for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
-
-    void (*pfnct)(void);
-
-    pfnct = (void (*)(void))VICVectAddr;
-
-    (*pfnct)();
-#else
-#error do_irq() not defined for this CPU type
-#endif
 }
 #endif
 
-#ifdef CONFIG_S3C4510B
-static void default_isr( void *data) {
-	printf ("default_isr():  called for IRQ %d\n", (int)data);
-}
-
-static void timer_isr( void *data) {
-	unsigned int *pTime = (unsigned int *)data;
-
-	(*pTime)++;
-	if ( !(*pTime % (CONFIG_SYS_HZ/4))) {
-		/* toggle LED 0 */
-		PUT_REG( REG_IOPDATA, GET_REG(REG_IOPDATA) ^ 0x1);
-	}
-
-}
-#endif
-
-#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* Use IntegratorAP routines in board/integratorap.c */
-#else
-
+#if defined(CONFIG_TEGRA)
 static ulong timestamp;
 static ulong lastdec;
 
-#if defined(CONFIG_USE_IRQ) && defined(CONFIG_S3C4510B)
-int arch_interrupt_init (void)
+int timer_init (void)
 {
-	int i;
-
-	/* install default interrupt handlers */
-	for ( i = 0; i < N_IRQS; i++) {
-		IRQ_HANDLER[i].m_data = (void *)i;
-		IRQ_HANDLER[i].m_func = default_isr;
-	}
-
-	/* configure interrupts for IRQ mode */
-	PUT_REG( REG_INTMODE, 0x0);
-	/* clear any pending interrupts */
-	PUT_REG( REG_INTPEND, 0x1FFFFF);
-
+	/* No timer routines for tegra as yet */
 	lastdec = 0;
-
-	/* install interrupt handler for timer */
-	IRQ_HANDLER[INT_TIMER0].m_data = (void *)&timestamp;
-	IRQ_HANDLER[INT_TIMER0].m_func = timer_isr;
+	timestamp = 0;
 
 	return 0;
 }
 #endif
-
-int timer_init (void)
-{
-#if defined(CONFIG_NETARM)
-	/* disable all interrupts */
-	IRQEN = 0;
-
-	/* operate timer 2 in non-prescale mode */
-	TM2CTRL = ( NETARM_GEN_TIMER_SET_HZ(CONFIG_SYS_HZ) |
-		    NETARM_GEN_TCTL_ENABLE |
-		    NETARM_GEN_TCTL_INIT_COUNT(TIMER_LOAD_VAL));
-
-	/* set timer 2 counter */
-	lastdec = TIMER_LOAD_VAL;
-#elif defined(CONFIG_S3C4510B)
-	/* configure free running timer 0 */
-	PUT_REG( REG_TMOD, 0x0);
-	/* Stop timer 0 */
-	CLR_REG( REG_TMOD, TM0_RUN);
-
-	/* Configure for interval mode */
-	CLR_REG( REG_TMOD, TM1_TOGGLE);
-
-	/*
-	 * Load Timer data register with count down value.
-	 * count_down_val = CONFIG_SYS_SYS_CLK_FREQ/CONFIG_SYS_HZ
-	 */
-	PUT_REG( REG_TDATA0, (CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ));
-
-	/*
-	 * Enable global interrupt
-	 * Enable timer0 interrupt
-	 */
-	CLR_REG( REG_INTMASK, ((1<<INT_GLOBAL) | (1<<INT_TIMER0)));
-
-	/* Start timer */
-	SET_REG( REG_TMOD, TM0_RUN);
-#elif defined(CONFIG_LPC2292)
-	PUT32(T0IR, 0);		/* disable all timer0 interrupts */
-	PUT32(T0TCR, 0);	/* disable timer0 */
-	PUT32(T0PR, CONFIG_SYS_SYS_CLK_FREQ / CONFIG_SYS_HZ);
-	PUT32(T0MCR, 0);
-	PUT32(T0TC, 0);
-	PUT32(T0TCR, 1);	/* enable timer0 */
-
-#elif defined(CONFIG_TEGRA)
-	/* No timer routines for tegra as yet */
-	lastdec = 0;
-#else
-#error No timer_init() defined for this CPU type
-#endif
-	timestamp = 0;
-
-	return (0);
-}
-
-#endif /* ! IntegratorAP */
-
-/*
- * timer without interrupts
- */
-
-
-#if defined(CONFIG_NETARM) || defined(CONFIG_LPC2292)
-
-ulong get_timer (ulong base)
-{
-	return get_timer_masked () - base;
-}
-
-void __udelay (unsigned long usec)
-{
-	ulong tmo;
-
-	tmo = usec / 1000;
-	tmo *= CONFIG_SYS_HZ;
-	tmo /= 1000;
-
-	tmo += get_timer (0);
-
-	while (get_timer_masked () < tmo)
-#ifdef CONFIG_LPC2292
-		/* GJ - not sure whether this is really needed or a misunderstanding */
-		__asm__ __volatile__(" nop");
-#else
-		/*NOP*/;
-#endif
-}
-
-ulong get_timer_masked (void)
-{
-	ulong now = READ_TIMER;
-
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += lastdec - now;
-	} else {
-		/* we have an overflow ... */
-		timestamp += lastdec + TIMER_LOAD_VAL - now;
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	if (usec >= 1000) {
-		tmo = usec / 1000;
-		tmo *= CONFIG_SYS_HZ;
-		tmo /= 1000;
-	} else {
-		tmo = usec * CONFIG_SYS_HZ;
-		tmo /= (1000*1000);
-	}
-
-	endtime = get_timer_masked () + tmo;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-#elif defined(CONFIG_S3C4510B)
-
-ulong get_timer (ulong base)
-{
-	return timestamp - base;
-}
-
-void __udelay (unsigned long usec)
-{
-	u32 ticks;
-
-	ticks = (usec * CONFIG_SYS_HZ) / 1000000;
-
-	ticks += get_timer (0);
-
-	while (get_timer (0) < ticks)
-		/*NOP*/;
-
-}
-
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* No timer routines for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_TEGRA)
-	/* No timer routines for tegra as yet */
-#else
-#error Timer routines not defined for this CPU type
-#endif
diff --git a/arch/arm/cpu/arm720t/lpc2292/Makefile b/arch/arm/cpu/arm720t/lpc2292/Makefile
deleted file mode 100644
index 1b93008..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2000-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS	= flash.o mmc.o mmc_hw.o spi.o
-SOBJS	= $(obj)iap_entry.o
-
-SRCS	:= $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-# this MUST be compiled as thumb code!
-$(SOBJS):
-	$(CC) $(AFLAGS) -march=armv4t -c -o $(SOBJS) iap_entry.S
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/arm/cpu/arm720t/lpc2292/flash.c b/arch/arm/cpu/arm720t/lpc2292/flash.c
deleted file mode 100644
index 3d2dc32..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/flash.c
+++ /dev/null
@@ -1,249 +0,0 @@
-/*
- * (C) Copyright 2006 Embedded Artists AB <www.embeddedartists.com>
- *
- * Modified to remove all but the IAP-command related code by
- * Gary Jennejohn <garyj@denx.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-/* IAP commands use 32 bytes at the top of CPU internal sram, we
-   use 512 bytes below that */
-#define COPY_BUFFER_LOCATION 0x40003de0
-
-#define IAP_LOCATION 0x7ffffff1
-#define IAP_CMD_PREPARE 50
-#define IAP_CMD_COPY 51
-#define IAP_CMD_ERASE 52
-#define IAP_CMD_CHECK 53
-#define IAP_CMD_ID 54
-#define IAP_CMD_VERSION 55
-#define IAP_CMD_COMPARE 56
-
-#define IAP_RET_CMD_SUCCESS 0
-
-static unsigned long command[5];
-static unsigned long result[2];
-
-extern void iap_entry(unsigned long * command, unsigned long * result);
-
-/*-----------------------------------------------------------------------
- *
- */
-static int get_flash_sector(flash_info_t * info, ulong flash_addr)
-{
-	int i;
-
-	for(i = 1; i < (info->sector_count); i++) {
-		if (flash_addr < (info->start[i]))
-			break;
-	}
-
-	return (i-1);
-}
-
-/*-----------------------------------------------------------------------
- * This function assumes that flash_addr is aligned on 512 bytes boundary
- * in flash. This function also assumes that prepare have been called
- * for the sector in question.
- */
-int lpc2292_copy_buffer_to_flash(flash_info_t * info, ulong flash_addr)
-{
-	int first_sector;
-	int last_sector;
-
-	first_sector = get_flash_sector(info, flash_addr);
-	last_sector = get_flash_sector(info, flash_addr + 512 - 1);
-
-	/* prepare sectors for write */
-	command[0] = IAP_CMD_PREPARE;
-	command[1] = first_sector;
-	command[2] = last_sector;
-	iap_entry(command, result);
-	if (result[0] != IAP_RET_CMD_SUCCESS) {
-		printf("IAP prepare failed\n");
-		return ERR_PROG_ERROR;
-	}
-
-	command[0] = IAP_CMD_COPY;
-	command[1] = flash_addr;
-	command[2] = COPY_BUFFER_LOCATION;
-	command[3] = 512;
-	command[4] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
-	iap_entry(command, result);
-	if (result[0] != IAP_RET_CMD_SUCCESS) {
-		printf("IAP copy failed\n");
-		return 1;
-	}
-
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int lpc2292_flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag;
-	int prot;
-	int sect;
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot)
-		return ERR_PROTECTED;
-
-
-	flag = disable_interrupts();
-
-	printf ("Erasing %d sectors starting at sector %2d.\n"
-	"This make take some time ... ",
-	s_last - s_first + 1, s_first);
-
-	command[0] = IAP_CMD_PREPARE;
-	command[1] = s_first;
-	command[2] = s_last;
-	iap_entry(command, result);
-	if (result[0] != IAP_RET_CMD_SUCCESS) {
-		printf("IAP prepare failed\n");
-		return ERR_PROTECTED;
-	}
-
-	command[0] = IAP_CMD_ERASE;
-	command[1] = s_first;
-	command[2] = s_last;
-	command[3] = CONFIG_SYS_SYS_CLK_FREQ >> 10;
-	iap_entry(command, result);
-	if (result[0] != IAP_RET_CMD_SUCCESS) {
-		printf("IAP erase failed\n");
-		return ERR_PROTECTED;
-	}
-
-	if (flag)
-		enable_interrupts();
-
-	return ERR_OK;
-}
-
-int lpc2292_write_buff (flash_info_t * info, uchar * src, ulong addr,
-			ulong cnt)
-{
-	int first_copy_size;
-	int last_copy_size;
-	int first_block;
-	int last_block;
-	int nbr_mid_blocks;
-	uchar memmap_value;
-	ulong i;
-	uchar* src_org;
-	uchar* dst_org;
-	int ret = ERR_OK;
-
-	src_org = src;
-	dst_org = (uchar*)addr;
-
-	first_block = addr / 512;
-	last_block = (addr + cnt) / 512;
-	nbr_mid_blocks = last_block - first_block - 1;
-
-	first_copy_size = 512 - (addr % 512);
-	last_copy_size = (addr + cnt) % 512;
-
-	debug("\ncopy first block: (1) %lX -> %lX 0x200 bytes, "
-		"(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX 0x200 bytes\n",
-	(ulong)(first_block * 512),
-	(ulong)COPY_BUFFER_LOCATION,
-	(ulong)src,
-	(ulong)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
-	first_copy_size,
-	(ulong)COPY_BUFFER_LOCATION,
-	(ulong)(first_block * 512));
-
-	/* copy first block */
-	memcpy((void*)COPY_BUFFER_LOCATION,
-		(void*)(first_block * 512), 512);
-	memcpy((void*)(COPY_BUFFER_LOCATION + 512 - first_copy_size),
-		src, first_copy_size);
-	lpc2292_copy_buffer_to_flash(info, first_block * 512);
-	src += first_copy_size;
-	addr += first_copy_size;
-
-	/* copy middle blocks */
-	for (i = 0; i < nbr_mid_blocks; i++) {
-		debug("copy middle block: %lX -> %lX 512 bytes, "
-		"%lX -> %lX 512 bytes\n",
-		(ulong)src,
-		(ulong)COPY_BUFFER_LOCATION,
-		(ulong)COPY_BUFFER_LOCATION,
-		(ulong)addr);
-
-		memcpy((void*)COPY_BUFFER_LOCATION, src, 512);
-		lpc2292_copy_buffer_to_flash(info, addr);
-		src += 512;
-		addr += 512;
-	}
-
-
-	if (last_copy_size > 0) {
-		debug("copy last block: (1) %lX -> %lX 0x200 bytes, "
-		"(2) %lX -> %lX 0x%X bytes, (3) %lX -> %lX x200 bytes\n",
-		(ulong)(last_block * 512),
-		(ulong)COPY_BUFFER_LOCATION,
-		(ulong)src,
-		(ulong)(COPY_BUFFER_LOCATION),
-		last_copy_size,
-		(ulong)COPY_BUFFER_LOCATION,
-		(ulong)addr);
-
-		/* copy last block */
-		memcpy((void*)COPY_BUFFER_LOCATION,
-			(void*)(last_block * 512), 512);
-		memcpy((void*)COPY_BUFFER_LOCATION,
-			src, last_copy_size);
-		lpc2292_copy_buffer_to_flash(info, addr);
-	}
-
-	/* verify write */
-	memmap_value = GET8(MEMMAP);
-
-	disable_interrupts();
-
-	PUT8(MEMMAP, 01);		/* we must make sure that initial 64
-							   bytes are taken from flash when we
-							   do the compare */
-
-	for (i = 0; i < cnt; i++) {
-		if (*dst_org != *src_org){
-			printf("Write failed. Byte %lX differs\n", i);
-			ret = ERR_PROG_ERROR;
-			break;
-		}
-		dst_org++;
-		src_org++;
-	}
-
-	PUT8(MEMMAP, memmap_value);
-	enable_interrupts();
-
-	return ret;
-}
diff --git a/arch/arm/cpu/arm720t/lpc2292/iap_entry.S b/arch/arm/cpu/arm720t/lpc2292/iap_entry.S
deleted file mode 100644
index c31d519..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/iap_entry.S
+++ /dev/null
@@ -1,7 +0,0 @@
-IAP_ADDRESS:	.word	0x7FFFFFF1
-
-.globl iap_entry
-iap_entry:
-	ldr	r2, IAP_ADDRESS
-	bx	r2
-	mov	pc, lr
diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc.c b/arch/arm/cpu/arm720t/lpc2292/mmc.c
deleted file mode 100644
index beaffe9..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/mmc.c
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <mmc.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <part.h>
-#include <fat.h>
-#include "mmc_hw.h"
-#include <asm/arch/spi.h>
-
-#ifdef CONFIG_MMC
-
-#undef MMC_DEBUG
-
-static block_dev_desc_t mmc_dev;
-
-/* these are filled out by a call to mmc_hw_get_parameters */
-static int hw_size;		/* in kbytes */
-static int hw_nr_sects;
-static int hw_sect_size;	/* in bytes */
-
-block_dev_desc_t * mmc_get_dev(int dev)
-{
-	return (block_dev_desc_t *)(&mmc_dev);
-}
-
-unsigned long mmc_block_read(int dev,
-			     unsigned long start,
-			     lbaint_t blkcnt,
-			     void *buffer)
-{
-	unsigned long rc = 0;
-	unsigned char *p = (unsigned char *)buffer;
-	unsigned long i;
-	unsigned long addr = start;
-
-#ifdef MMC_DEBUG
-	printf("mmc_block_read: start=%lu, blkcnt=%lu\n", start,
-		 (unsigned long)blkcnt);
-#endif
-
-	for(i = 0; i < (unsigned long)blkcnt; i++) {
-#ifdef MMC_DEBUG
-		printf("mmc_read_sector: addr=%lu, buffer=%p\n", addr, p);
-#endif
-		(void)mmc_read_sector(addr, p);
-		rc++;
-		addr++;
-		p += hw_sect_size;
-	}
-
-	return rc;
-}
-
-/*-----------------------------------------------------------------------------
- * Read hardware paramterers (sector size, size, number of sectors)
- */
-static int mmc_hw_get_parameters(void)
-{
-	unsigned char csddata[16];
-	unsigned int sizemult;
-	unsigned int size;
-
-	mmc_read_csd(csddata);
-	hw_sect_size = 1<<(csddata[5] & 0x0f);
-	size = ((csddata[6]&0x03)<<10)+(csddata[7]<<2)+(csddata[8]&0xc0);
-	sizemult = ((csddata[10] & 0x80)>>7)+((csddata[9] & 0x03)<<1);
-	hw_nr_sects = (size+1)*(1<<(sizemult+2));
-	hw_size = hw_nr_sects*hw_sect_size/1024;
-
-#ifdef MMC_DEBUG
-	printf("mmc_hw_get_parameters: hw_sect_size=%d, hw_nr_sects=%d, "
-		 "hw_size=%d\n", hw_sect_size, hw_nr_sects, hw_size);
-#endif
-
-	return 0;
-}
-
-int mmc_legacy_init(int verbose)
-{
-	int ret = -ENODEV;
-
-	if (verbose)
-		printf("mmc_legacy_init\n");
-
-	spi_init();
-	/* this meeds to be done twice */
-	mmc_hw_init();
-	udelay(1000);
-	mmc_hw_init();
-
-	mmc_hw_get_parameters();
-
-	mmc_dev.if_type = IF_TYPE_MMC;
-	mmc_dev.part_type = PART_TYPE_DOS;
-	mmc_dev.dev = 0;
-	mmc_dev.lun = 0;
-	mmc_dev.type = 0;
-	mmc_dev.blksz = hw_sect_size;
-	mmc_dev.lba = hw_nr_sects;
-	sprintf((char*)mmc_dev.vendor, "Unknown vendor");
-	sprintf((char*)mmc_dev.product, "Unknown product");
-	sprintf((char*)mmc_dev.revision, "N/A");
-	mmc_dev.removable = 0;	/* should be true??? */
-	mmc_dev.block_read = mmc_block_read;
-
-	fat_register_device(&mmc_dev, 1);
-
-	ret = 0;
-
-	return ret;
-}
-
-#endif /* CONFIG_MMC */
diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c
deleted file mode 100644
index bd6a5b1..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
-    This code was original written by Ulrich Radig and modified by
-    Embedded Artists AB (www.embeddedartists.com).
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spi.h>
-
-#define MMC_Enable() PUT32(IO1CLR, 1l << 22)
-#define MMC_Disable() PUT32(IO1SET, 1l << 22)
-#define mmc_spi_cfg() spi_set_clock(8); spi_set_cfg(0, 1, 0);
-
-static unsigned char Write_Command_MMC (unsigned char *CMD);
-static void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer,
-		    unsigned short int Bytes);
-
-/* initialize the hardware */
-int mmc_hw_init(void)
-{
-	unsigned long a;
-	unsigned short int Timeout = 0;
-	unsigned char b;
-	unsigned char CMD[] = {0x40, 0x00, 0x00, 0x00, 0x00, 0x95};
-
-	/* set-up GPIO and SPI */
-	(*((volatile unsigned long *)PINSEL2)) &= ~(1l << 3); /* clear bit 3 */
-	(*((volatile unsigned long *)IO1DIR)) |= (1l << 22); /* set bit 22 (output) */
-
-	MMC_Disable();
-
-	spi_lock();
-	spi_set_clock(248);
-	spi_set_cfg(0, 1, 0);
-	MMC_Enable();
-
-	/* waste some time */
-	for(a=0; a < 20000; a++)
-		asm("nop");
-
-	/* Put the MMC/SD-card into SPI-mode */
-	for (b = 0; b < 10; b++) /* Sends min 74+ clocks to the MMC/SD-card */
-		spi_write(0xff);
-
-	/* Sends command CMD0 to MMC/SD-card */
-	while (Write_Command_MMC(CMD) != 1) {
-		if (Timeout++ > 200) {
-			MMC_Disable();
-			spi_unlock();
-			return(1); /* Abort with command 1 (return 1) */
-		}
-	}
-	/* Sends Command CMD1 an MMC/SD-card */
-	Timeout = 0;
-	CMD[0] = 0x41;/* Command 1 */
-	CMD[5] = 0xFF;
-
-	while (Write_Command_MMC(CMD) != 0) {
-		if (Timeout++ > 200) {
-			MMC_Disable();
-			spi_unlock();
-			return (2); /* Abort with command 2 (return 2) */
-		}
-	}
-
-	MMC_Disable();
-	spi_unlock();
-
-	return 0;
-}
-
-/* ############################################################################
-   Sends a command to the MMC/SD-card
-   ######################################################################### */
-static unsigned char Write_Command_MMC (unsigned char *CMD)
-{
-	unsigned char a, tmp = 0xff;
-	unsigned short int Timeout = 0;
-
-	MMC_Disable();
-	spi_write(0xFF);
-	MMC_Enable();
-
-	for (a = 0; a < 0x06; a++)
-		spi_write(*CMD++);
-
-	while (tmp == 0xff) {
-		tmp = spi_read();
-		if (Timeout++ > 5000)
-		  break;
-	}
-
-	return (tmp);
-}
-
-/* ############################################################################
-   Routine to read the CID register from the MMC/SD-card (16 bytes)
-   ######################################################################### */
-void MMC_Read_Block(unsigned char *CMD, unsigned char *Buffer, unsigned short
-	int Bytes)
-{
-	unsigned short int a;
-
-	spi_lock();
-	mmc_spi_cfg();
-	MMC_Enable();
-
-	if (Write_Command_MMC(CMD) != 0) {
-		MMC_Disable();
-		spi_unlock();
-		return;
-	}
-
-	while (spi_read() != 0xfe) {};
-	for (a = 0; a < Bytes; a++)
-		*Buffer++ = spi_read();
-
-	/* Read the CRC-byte */
-	spi_read(); /* CRC - byte is discarded */
-	spi_read(); /* CRC - byte is discarded */
-	/* set MMC_Chip_Select to high (MMC/SD-card Inaktiv) */
-	MMC_Disable();
-	spi_unlock();
-
-	return;
-}
-
-/* ############################################################################
-   Routine to read a block (512 bytes) from the MMC/SD-card
-   ######################################################################### */
-unsigned char mmc_read_sector (unsigned long addr,unsigned char *Buffer)
-{
-	/* Command 16 to read aBlocks from the MMC/SD - caed */
-	unsigned char CMD[] = {0x51,0x00,0x00,0x00,0x00,0xFF};
-
-	/* The address on the MMC/SD-card is in bytes,
-	addr is transformed from blocks to bytes and the result is
-	placed into the command */
-
-	addr = addr << 9; /* addr = addr * 512 */
-
-	CMD[1] = ((addr & 0xFF000000) >> 24);
-	CMD[2] = ((addr & 0x00FF0000) >> 16);
-	CMD[3] = ((addr & 0x0000FF00) >> 8 );
-
-	MMC_Read_Block(CMD, Buffer, 512);
-
-	return (0);
-}
-
-/* ############################################################################
-   Routine to write a block (512 byte) to the MMC/SD-card
-   ######################################################################### */
-unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer)
-{
-	unsigned char tmp, a;
-	unsigned short int b;
-	/* Command 24 to write a block to the MMC/SD - card */
-	unsigned char CMD[] = {0x58, 0x00, 0x00, 0x00, 0x00, 0xFF};
-
-	/* The address on the MMC/SD-card is in bytes,
-	addr is transformed from blocks to bytes and the result is
-	placed into the command */
-
-	addr = addr << 9; /* addr = addr * 512 */
-
-	CMD[1] = ((addr & 0xFF000000) >> 24);
-	CMD[2] = ((addr & 0x00FF0000) >> 16);
-	CMD[3] = ((addr & 0x0000FF00) >> 8 );
-
-	spi_lock();
-	mmc_spi_cfg();
-	MMC_Enable();
-
-	/* Send command CMD24 to the MMC/SD-card (Write 1 Block/512 Bytes) */
-	tmp = Write_Command_MMC(CMD);
-	if (tmp != 0) {
-		MMC_Disable();
-		spi_unlock();
-		return(tmp);
-	}
-
-	/* Do a short delay and send a clock-pulse to the MMC/SD-card */
-	for (a = 0; a < 100; a++)
-		spi_read();
-
-	/* Send a start byte to the MMC/SD-card */
-	spi_write(0xFE);
-
-	/* Write the block (512 bytes) to the MMC/SD-card */
-	for (b = 0; b < 512; b++)
-		spi_write(*Buffer++);
-
-	/* write the CRC-Byte */
-	spi_write(0xFF); /* write a dummy CRC */
-	spi_write(0xFF); /* CRC code is not used */
-
-	/* Wait for MMC/SD-card busy */
-	while (spi_read() != 0xff) {};
-
-	/* set MMC_Chip_Select to high (MMC/SD-card inactive) */
-	MMC_Disable();
-	spi_unlock();
-	return (0);
-}
-
-/* #########################################################################
-   Routine to read the CSD register from the MMC/SD-card (16 bytes)
-   ######################################################################### */
-unsigned char mmc_read_csd (unsigned char *Buffer)
-{
-	/* Command to read the CSD register */
-	unsigned char CMD[] = {0x49, 0x00, 0x00, 0x00, 0x00, 0xFF};
-
-	MMC_Read_Block(CMD, Buffer, 16);
-
-	return (0);
-}
diff --git a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h b/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h
deleted file mode 100644
index 3687dbf..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/mmc_hw.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
-    This module implements a linux character device driver for the 24c256 chip.
-    Copyright (C) 2006  Embedded Artists AB (www.embeddedartists.com)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef _MMC_HW_
-#define _MMC_HW_
-
-unsigned char mmc_read_csd(unsigned char *Buffer);
-unsigned char mmc_read_sector (unsigned long addr,
-			       unsigned char *Buffer);
-unsigned char mmc_write_sector (unsigned long addr,unsigned char *Buffer);
-int mmc_hw_init(void);
-
-#endif /* _MMC_HW_ */
diff --git a/arch/arm/cpu/arm720t/lpc2292/spi.c b/arch/arm/cpu/arm720t/lpc2292/spi.c
deleted file mode 100644
index d296bda..0000000
--- a/arch/arm/cpu/arm720t/lpc2292/spi.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/*
-    This module implements an interface to the SPI on the lpc22xx.
-    Copyright (C) 2006  Embedded Artists AB (www.embeddedartists.com)
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#include <config.h>
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <asm/arch/spi.h>
-
-unsigned long spi_flags;
-unsigned char spi_idle = 0x00;
-
-int spi_init(void)
-{
-	unsigned long pinsel0_value;
-
-	/* activate spi pins */
-	pinsel0_value = GET32(PINSEL0);
-	pinsel0_value &= ~(0xFFl << 8);
-	pinsel0_value |= (0x55l << 8);
-	PUT32(PINSEL0, pinsel0_value);
-
-	return 0;
-}
diff --git a/arch/arm/cpu/arm720t/s3c4510b/Makefile b/arch/arm/cpu/arm720t/s3c4510b/Makefile
deleted file mode 100644
index 5c6df08..0000000
--- a/arch/arm/cpu/arm720t/s3c4510b/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# (C) Copyright 2000-2008
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(SOC).o
-
-COBJS-y	+= cache.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
-
-all:	$(obj).depend $(LIB)
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/arm/cpu/arm720t/s3c4510b/cache.c b/arch/arm/cpu/arm720t/s3c4510b/cache.c
deleted file mode 100644
index 104d287..0000000
--- a/arch/arm/cpu/arm720t/s3c4510b/cache.c
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-
-void icache_enable (void)
-{
-	s32 i;
-
-	/* disable all cache bits */
-	CLR_REG( REG_SYSCFG, 0x3F);
-
-	/* 8KB cache, write enable */
-	SET_REG( REG_SYSCFG, CACHE_WRITE_BUFF | CACHE_MODE_01);
-
-	/* clear TAG RAM bits */
-	for ( i = 0; i < 256; i++)
-	  PUT_REG( CACHE_TAG_RAM + 4*i, 0x00000000);
-
-	/* clear SET0 RAM */
-	for(i=0; i < 1024; i++)
-	  PUT_REG( CACHE_SET0_RAM + 4*i, 0x00000000);
-
-	/* clear SET1 RAM */
-	for(i=0; i < 1024; i++)
-	  PUT_REG( CACHE_SET1_RAM + 4*i, 0x00000000);
-
-	/* enable cache */
-	SET_REG( REG_SYSCFG, CACHE_ENABLE);
-
-}
-
-void icache_disable (void)
-{
-	/* disable all cache bits */
-	CLR_REG( REG_SYSCFG, 0x3F);
-}
-
-int icache_status (void)
-{
-	return GET_REG( REG_SYSCFG) & CACHE_ENABLE;
-}
-
-void dcache_enable (void)
-{
-	/* we don't have seperate instruction/data caches */
-	icache_enable();
-}
-
-void dcache_disable (void)
-{
-	/* we don't have seperate instruction/data caches */
-	icache_disable();
-}
-
-int dcache_status (void)
-{
-	/* we don't have seperate instruction/data caches */
-	return icache_status();
-}
diff --git a/arch/arm/cpu/arm720t/start.S b/arch/arm/cpu/arm720t/start.S
index 2f914e9..c2a7763 100644
--- a/arch/arm/cpu/arm720t/start.S
+++ b/arch/arm/cpu/arm720t/start.S
@@ -43,11 +43,7 @@
 	ldr	pc, _software_interrupt
 	ldr	pc, _prefetch_abort
 	ldr	pc, _data_abort
-#ifdef CONFIG_LPC2292
-	.word	0xB4405F76 /* 2's complement of the checksum of the vectors */
-#else
 	ldr	pc, _not_used
-#endif
 	ldr	pc, _irq
 	ldr	pc, _fiq
 
@@ -151,10 +147,6 @@
 	bl	cpu_init_crit
 #endif
 
-#ifdef CONFIG_LPC2292
-	bl	lowlevel_init
-#endif
-
 /* Set stackpointer in internal RAM to call board_init_f */
 call_board_init_f:
 	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
@@ -291,148 +283,9 @@
  *************************************************************************
  */
 
-#if defined(CONFIG_LPC2292)
-PLLCFG_ADR:	.word	PLLCFG
-PLLFEED_ADR:	.word	PLLFEED
-PLLCON_ADR:	.word	PLLCON
-PLLSTAT_ADR:	.word	PLLSTAT
-VPBDIV_ADR:	.word	VPBDIV
-MEMMAP_ADR:	.word	MEMMAP
-
-#endif
-
 cpu_init_crit:
-#if defined(CONFIG_NETARM)
-	/*
-	 * prior to software reset : need to set pin PORTC4 to be *HRESET
-	 */
-	ldr	r0, =NETARM_GEN_MODULE_BASE
-	ldr	r1, =(NETARM_GEN_PORT_MODE(0x10) | \
-			NETARM_GEN_PORT_DIR(0x10))
-	str	r1, [r0, #+NETARM_GEN_PORTC]
-	/*
-	 * software reset : see HW Ref. Guide 8.2.4 : Software Service register
-	 *		    for an explanation of this process
-	 */
-	ldr	r0, =NETARM_GEN_MODULE_BASE
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
-	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
-	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
-	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
-	str	r1, [r0, #+NETARM_GEN_SOFTWARE_SERVICE]
-	/*
-	 * setup PLL and System Config
-	 */
-	ldr	r0, =NETARM_GEN_MODULE_BASE
 
-	ldr	r1, =(	NETARM_GEN_SYS_CFG_LENDIAN | \
-			NETARM_GEN_SYS_CFG_BUSFULL | \
-			NETARM_GEN_SYS_CFG_USER_EN | \
-			NETARM_GEN_SYS_CFG_ALIGN_ABORT | \
-			NETARM_GEN_SYS_CFG_BUSARB_INT | \
-			NETARM_GEN_SYS_CFG_BUSMON_EN )
-
-	str	r1, [r0, #+NETARM_GEN_SYSTEM_CONTROL]
-
-#ifndef CONFIG_NETARM_PLL_BYPASS
-	ldr	r1, =(	NETARM_GEN_PLL_CTL_PLLCNT(NETARM_PLL_COUNT_VAL) | \
-			NETARM_GEN_PLL_CTL_POLTST_DEF | \
-			NETARM_GEN_PLL_CTL_INDIV(1) | \
-			NETARM_GEN_PLL_CTL_ICP_DEF | \
-			NETARM_GEN_PLL_CTL_OUTDIV(2) )
-	str	r1, [r0, #+NETARM_GEN_PLL_CONTROL]
-#endif
-
-	/*
-	 * mask all IRQs by clearing all bits in the INTMRs
-	 */
-	mov	r1, #0
-	ldr	r0, =NETARM_GEN_MODULE_BASE
-	str	r1, [r0, #+NETARM_GEN_INTR_ENABLE]
-
-#elif defined(CONFIG_S3C4510B)
-
-	/*
-	 * Mask off all IRQ sources
-	 */
-	ldr	r1, =REG_INTMASK
-	ldr	r0, =0x3FFFFF
-	str	r0, [r1]
-
-	/*
-	 * Disable Cache
-	 */
-	ldr r0, =REG_SYSCFG
-	ldr r1, =0x83ffffa0	/* cache-disabled  */
-	str r1, [r0]
-
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* No specific initialisation for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
-	/* Set-up PLL */
-	mov	r3, #0xAA
-	mov	r4, #0x55
-	/* First disconnect and disable the PLL */
-	ldr	r0, PLLCON_ADR
-	mov	r1, #0x00
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Set new M and P values */
-	ldr	r0, PLLCFG_ADR
-	mov	r1, #0x23	/* M=4 and P=2 */
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Then enable the PLL */
-	ldr	r0, PLLCON_ADR
-	mov	r1, #0x01	/* PLL enable bit */
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Wait for the lock */
-	ldr	r0, PLLSTAT_ADR
-	mov	r1, #0x400	/* lock bit */
-lock_loop:
-	ldr	r2, [r0]
-	and	r2, r1, r2
-	cmp	r2, #0
-	beq	lock_loop
-	/* And finally connect the PLL */
-	ldr	r0, PLLCON_ADR
-	mov	r1, #0x03	/* PLL enable bit and connect bit */
-	str	r1, [r0]
-	ldr	r0, PLLFEED_ADR /* start feed sequence */
-	str	r3, [r0]
-	str	r4, [r0]	/* feed sequence done */
-	/* Set-up VPBDIV register */
-	ldr	r0, VPBDIV_ADR
-	mov	r1, #0x01	/* VPB clock is same as process clock */
-	str	r1, [r0]
-#elif defined(CONFIG_TEGRA)
-	/* No cpu_init_crit for tegra as yet */
-#else
-#error No cpu_init_crit() defined for current CPU type
-#endif
-
-#ifdef CONFIG_ARM7_REVD
-	/* set clock speed */
-	/* !!! we run @ 36 MHz due to a hardware flaw in Rev. D processors */
-	/* !!! not doing DRAM refresh properly! */
-	ldr	r0, SYSCON3
-	ldr	r1, [r0]
-	bic	r1, r1, #CLKCTL
-	orr	r1, r1, #CLKCTL_36
-	str	r1, [r0]
-#endif
-
-#if !defined(CONFIG_LPC2292) && !defined(CONFIG_TEGRA)
+#if !defined(CONFIG_TEGRA)
 	mov	ip, lr
 	/*
 	 * before relocating, we have to setup RAM timing
@@ -610,39 +463,3 @@
 
 #endif
 #endif /* CONFIG_SPL_BUILD */
-
-#if defined(CONFIG_NETARM)
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	ldr	r1, =NETARM_MEM_MODULE_BASE
-	ldr	r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
-	ldr	r1, =0xFFFFF000
-	and	r0, r1, r0
-	ldr	r1, =(relocate-CONFIG_SYS_TEXT_BASE)
-	add	r0, r1, r0
-	ldr	r4, =NETARM_GEN_MODULE_BASE
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
-	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
-	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETA
-	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
-	ldr	r1, =NETARM_GEN_SW_SVC_RESETB
-	str	r1, [r4, #+NETARM_GEN_SOFTWARE_SERVICE]
-	mov	pc, r0
-#elif defined(CONFIG_S3C4510B)
-/* Nothing done here as reseting the CPU is board specific, depending
- * on external peripherals such as watchdog timers, etc. */
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
-	/* No specific reset actions for IntegratorAP/CM720T as yet */
-#elif defined(CONFIG_LPC2292)
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	mov	pc, r0
-#elif defined(CONFIG_TEGRA)
-	/* No specific reset actions for tegra as yet */
-#else
-#error No reset_cpu() defined for current CPU type
-#endif
diff --git a/arch/arm/cpu/arm720t/tegra-common/spl.c b/arch/arm/cpu/arm720t/tegra-common/spl.c
index 0d37ce8..c280ab7 100644
--- a/arch/arm/cpu/arm720t/tegra-common/spl.c
+++ b/arch/arm/cpu/arm720t/tegra-common/spl.c
@@ -23,105 +23,42 @@
  * MA 02111-1307 USA
  */
 #include <common.h>
-#include <asm/u-boot.h>
-#include <asm/utils.h>
-#include <nand.h>
-#include <mmc.h>
-#include <fat.h>
-#include <version.h>
-#include <i2c.h>
-#include <image.h>
-#include <malloc.h>
-#include <linux/compiler.h>
 #include "cpu.h"
+#include <spl.h>
 
 #include <asm/io.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch/tegra.h>
 #include <asm/arch-tegra/board.h>
-#include <asm/arch-tegra/clk_rst.h>
-#include <asm/arch-tegra/pmc.h>
-#include <asm/arch-tegra/scu.h>
-#include <asm/arch-tegra/sys_proto.h>
+#include <asm/arch/spl.h>
 
-DECLARE_GLOBAL_DATA_PTR;
 
-/* Define global data structure pointer to it*/
-static gd_t gdata __attribute__ ((section(".data")));
-static bd_t bdata __attribute__ ((section(".data")));
-
-inline void hang(void)
-{
-	puts("### ERROR ### Please RESET the board ###\n");
-	for (;;)
-		;
-}
-
-void board_init_f(ulong dummy)
-{
-	board_init_uart_f();
-
-	/* Initialize periph GPIOs */
-	gpio_early_init_uart();
-
-	/*
-	 * We call relocate_code() with relocation target same as the
-	 * CONFIG_SYS_SPL_TEXT_BASE. This will result in relocation getting
-	 * skipped. Instead, only .bss initialization will happen. That's
-	 * all we need
-	 */
-	debug(">>board_init_f()\n");
-	relocate_code(CONFIG_SPL_STACK, &gdata, CONFIG_SPL_TEXT_BASE);
-}
-
-/* This requires UART clocks to be enabled */
-static void preloader_console_init(void)
-{
-	const char *u_boot_rev = U_BOOT_VERSION;
-
-	gd = &gdata;
-	gd->bd = &bdata;
-	gd->flags |= GD_FLG_RELOC;
-	gd->baudrate = CONFIG_BAUDRATE;
-
-	serial_init();		/* serial communications setup */
-
-	gd->have_console = 1;
-
-	/* Avoid a second "U-Boot" coming from this string */
-	u_boot_rev = &u_boot_rev[7];
-
-	printf("\nU-Boot SPL %s (%s - %s)\n", u_boot_rev, U_BOOT_DATE,
-		U_BOOT_TIME);
-}
-
-void board_init_r(gd_t *id, ulong dummy)
+void spl_board_init(void)
 {
 	struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE;
 
 	/* enable JTAG */
 	writel(0xC0, &pmt->pmt_cfg_ctl);
 
-	debug(">>spl:board_init_r()\n");
+	board_init_uart_f();
 
-	mem_malloc_init(CONFIG_SYS_SPL_MALLOC_START,
-			CONFIG_SYS_SPL_MALLOC_SIZE);
-
-#ifdef CONFIG_SPL_BOARD_INIT
-	spl_board_init();
-#endif
+	/* Initialize periph GPIOs */
+	gpio_early_init_uart();
 
 	clock_early_init();
-	serial_init();
 	preloader_console_init();
-
-	start_cpu((u32)CONFIG_SYS_TEXT_BASE);
-	halt_avp();
-	/* not reached */
 }
 
-int board_usb_init(const void *blob)
+u32 spl_boot_device(void)
 {
-	return 0;
+	return BOOT_DEVICE_RAM;
+}
+
+void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
+{
+	debug("image entry point: 0x%X\n", spl_image->entry_point);
+
+	start_cpu((u32)spl_image->entry_point);
+	halt_avp();
 }
diff --git a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
index dc6ba34..008ae89 100644
--- a/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
+++ b/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
@@ -48,9 +48,11 @@
 	.got : { *(.got) }
 
 	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 	__bss_start = .;
diff --git a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
index e9f1227..1bba571 100644
--- a/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
+++ b/arch/arm/cpu/arm920t/ks8695/lowlevel_init.S
@@ -72,10 +72,10 @@
 	 * enable UART for early debug trace
 	 */
 	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_DIVISOR)
-	mov	r2, #0xd9
-	str	r2, [r1]		/* 115200 baud */
+	mov	r2, #((25000000+CONFIG_BAUDRATE/2) / CONFIG_BAUDRATE)
+	str	r2, [r1]
 	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_LINE_CTRL)
-	mov	r2, #0x03
+	mov	r2, #KS8695_UART_LINEC_WLEN8
 	str	r2, [r1]		/* 8 data bits, no parity, 1 stop */
 	ldr	r1, =(KS8695_IO_BASE+KS8695_UART_TX_HOLDING)
 	mov	r2, #0x41
diff --git a/arch/arm/cpu/arm920t/s3c24x0/Makefile b/arch/arm/cpu/arm920t/s3c24x0/Makefile
index 0029700..808ab8f 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/Makefile
+++ b/arch/arm/cpu/arm920t/s3c24x0/Makefile
@@ -29,9 +29,6 @@
 COBJS-$(CONFIG_DISPLAY_CPUINFO)	+= cpu_info.o
 COBJS-y	+= speed.o
 COBJS-y	+= timer.o
-COBJS-y	+= usb.o
-COBJS-y	+= usb_ohci.o
-
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS-y))
diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb.c b/arch/arm/cpu/arm920t/s3c24x0/usb.c
deleted file mode 100644
index 226a3f6..0000000
--- a/arch/arm/cpu/arm920t/s3c24x0/usb.c
+++ /dev/null
@@ -1,71 +0,0 @@
-/*
- * (C) Copyright 2006
- * DENX Software Engineering <mk@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#if defined(CONFIG_USB_OHCI_NEW) && \
-    defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
-    defined(CONFIG_S3C24X0)
-
-#include <asm/arch/s3c24x0_cpu.h>
-#include <asm/io.h>
-
-int usb_cpu_init(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
-
-	/*
-	 * Set the 48 MHz UPLL clocking. Values are taken from
-	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
-	 */
-	writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
-	/* 1 = use pads related USB for USB host */
-	writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
-
-	/*
-	 * Enable USB host clock.
-	 */
-	writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
-
-	return 0;
-}
-
-int usb_cpu_stop(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	/* may not want to do this */
-	writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
-	return 0;
-}
-
-int usb_cpu_init_fail(void)
-{
-	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
-	writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
-	return 0;
-}
-
-#endif /* defined(CONFIG_USB_OHCI_NEW) && \
-	   defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
-	   defined(CONFIG_S3C24X0) */
diff --git a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
index 6d77219..9348552 100644
--- a/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
+++ b/arch/arm/cpu/arm926ejs/at91/at91sam9x5_devices.c
@@ -118,6 +118,21 @@
 	writel(1 << ATMEL_ID_USART2, &pmc->pcer);
 }
 
+void at91_mci_hw_init(void)
+{
+	/* Initialize the MCI0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 17, 1);	/* MCCK */
+	at91_set_a_periph(AT91_PIO_PORTA, 16, 1);	/* MCCDA */
+	at91_set_a_periph(AT91_PIO_PORTA, 15, 1);	/* MCDA0 */
+	at91_set_a_periph(AT91_PIO_PORTA, 18, 1);	/* MCDA1 */
+	at91_set_a_periph(AT91_PIO_PORTA, 19, 1);	/* MCDA2 */
+	at91_set_a_periph(AT91_PIO_PORTA, 20, 1);	/* MCDA3 */
+
+	/* Enable clock for MCI0 */
+	struct at91_pmc *pmc = (struct at91_pmc *)ATMEL_BASE_PMC;
+	writel(1 << ATMEL_ID_HSMCI0, &pmc->pcer);
+}
+
 #ifdef CONFIG_ATMEL_SPI
 void at91_spi0_hw_init(unsigned long cs_mask)
 {
diff --git a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
index f8ea38c..6dc681a 100644
--- a/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/mxs/u-boot-spl.lds
@@ -50,9 +50,10 @@
 	}
 
 	. = ALIGN(4);
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	.u_boot_list : {
+		#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 
diff --git a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
index afd3381..f3bd5e7 100644
--- a/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
+++ b/arch/arm/cpu/arm926ejs/spear/u-boot-spl.lds
@@ -50,9 +50,10 @@
 	}
 
 	. = ALIGN(4);
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	.u_boot_list : {
+		#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 
diff --git a/arch/arm/cpu/armv7/am33xx/Makefile b/arch/arm/cpu/armv7/am33xx/Makefile
index 7768912..74875b3 100644
--- a/arch/arm/cpu/armv7/am33xx/Makefile
+++ b/arch/arm/cpu/armv7/am33xx/Makefile
@@ -21,6 +21,7 @@
 COBJS	+= ddr.o
 COBJS	+= emif4.o
 COBJS	+= board.o
+COBJS	+= mux.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS) $(COBJS-y) $(SOBJS))
diff --git a/arch/arm/cpu/armv7/am33xx/board.c b/arch/arm/cpu/armv7/am33xx/board.c
index 978b184..e4c123c 100644
--- a/arch/arm/cpu/armv7/am33xx/board.c
+++ b/arch/arm/cpu/armv7/am33xx/board.c
@@ -36,9 +36,6 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
-struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
-
 static const struct gpio_bank gpio_bank_am33xx[4] = {
 	{ (void *)AM33XX_GPIO0_BASE, METHOD_GPIO_24XX },
 	{ (void *)AM33XX_GPIO1_BASE, METHOD_GPIO_24XX },
@@ -48,153 +45,11 @@
 
 const struct gpio_bank *const omap_gpio_bank = gpio_bank_am33xx;
 
-/* MII mode defines */
-#define MII_MODE_ENABLE		0x0
-#define RGMII_MODE_ENABLE	0xA
-
-/* GPIO that controls power to DDR on EVM-SK */
-#define GPIO_DDR_VTT_EN		7
-
-static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
-
-static struct am335x_baseboard_id __attribute__((section (".data"))) header;
-
-static inline int board_is_bone(void)
-{
-	return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
-}
-
-static inline int board_is_evm_sk(void)
-{
-	return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
-}
-
-/*
- * Read header information from EEPROM into global structure.
- */
-static int read_eeprom(void)
-{
-	/* Check if baseboard eeprom is available */
-	if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
-		puts("Could not probe the EEPROM; something fundamentally "
-			"wrong on the I2C bus.\n");
-		return -ENODEV;
-	}
-
-	/* read the eeprom using i2c */
-	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
-							sizeof(header))) {
-		puts("Could not read the EEPROM; something fundamentally"
-			" wrong on the I2C bus.\n");
-		return -EIO;
-	}
-
-	if (header.magic != 0xEE3355AA) {
-		/*
-		 * read the eeprom using i2c again,
-		 * but use only a 1 byte address
-		 */
-		if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1,
-					(uchar *)&header, sizeof(header))) {
-			puts("Could not read the EEPROM; something "
-				"fundamentally wrong on the I2C bus.\n");
-			return -EIO;
-		}
-
-		if (header.magic != 0xEE3355AA) {
-			printf("Incorrect magic number (0x%x) in EEPROM\n",
-					header.magic);
-			return -EINVAL;
-		}
-	}
-
-	return 0;
-}
-
-/* UART Defines */
-#ifdef CONFIG_SPL_BUILD
-#define UART_RESET		(0x1 << 1)
-#define UART_CLK_RUNNING_MASK	0x1
-#define UART_SMART_IDLE_EN	(0x1 << 0x3)
-#endif
-
-/*
- * Determine what type of DDR we have.
- */
-static short inline board_memory_type(void)
-{
-	/* The following boards are known to use DDR3. */
-	if (board_is_evm_sk())
-		return EMIF_REG_SDRAM_TYPE_DDR3;
-
-	return EMIF_REG_SDRAM_TYPE_DDR2;
-}
-
-/*
- * early system init of muxing and clocks.
- */
-void s_init(void)
-{
-	/* WDT1 is already running when the bootloader gets control
-	 * Disable it to avoid "random" resets
-	 */
-	writel(0xAAAA, &wdtimer->wdtwspr);
-	while (readl(&wdtimer->wdtwwps) != 0x0)
-		;
-	writel(0x5555, &wdtimer->wdtwspr);
-	while (readl(&wdtimer->wdtwwps) != 0x0)
-		;
-
-#ifdef CONFIG_SPL_BUILD
-	/* Setup the PLLs and the clocks for the peripherals */
-	pll_init();
-
-	/* UART softreset */
-	u32 regVal;
-
-	enable_uart0_pin_mux();
-
-	regVal = readl(&uart_base->uartsyscfg);
-	regVal |= UART_RESET;
-	writel(regVal, &uart_base->uartsyscfg);
-	while ((readl(&uart_base->uartsyssts) &
-		UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
-		;
-
-	/* Disable smart idle */
-	regVal = readl(&uart_base->uartsyscfg);
-	regVal |= UART_SMART_IDLE_EN;
-	writel(regVal, &uart_base->uartsyscfg);
-
-	gd = &gdata;
-
-	preloader_console_init();
-
-	/* Initalize the board header */
-	enable_i2c0_pin_mux();
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	if (read_eeprom() < 0)
-		puts("Could not get board ID.\n");
-
-	enable_board_pin_mux(&header);
-	if (board_is_evm_sk()) {
-		/*
-		 * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
-		 * This is safe enough to do on older revs.
-		 */
-		gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
-		gpio_direction_output(GPIO_DDR_VTT_EN, 1);
-	}
-
-	config_ddr(board_memory_type());
-#endif
-}
-
 #if defined(CONFIG_OMAP_HSMMC) && !defined(CONFIG_SPL_BUILD)
-int board_mmc_init(bd_t *bis)
+int cpu_mmc_init(bd_t *bis)
 {
 	int ret;
-	
+
 	ret = omap_mmc_init(0, 0, 0);
 	if (ret)
 		return ret;
@@ -208,93 +63,3 @@
 	/* Not yet implemented */
 	return;
 }
-
-/*
- * Basic board specific setup.  Pinmux has been handled already.
- */
-int board_init(void)
-{
-	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
-	if (read_eeprom() < 0)
-		puts("Could not get board ID.\n");
-
-	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_CPSW
-static void cpsw_control(int enabled)
-{
-	/* VTP can be added here */
-
-	return;
-}
-
-static struct cpsw_slave_data cpsw_slaves[] = {
-	{
-		.slave_reg_ofs	= 0x208,
-		.sliver_reg_ofs	= 0xd80,
-		.phy_id		= 0,
-	},
-	{
-		.slave_reg_ofs	= 0x308,
-		.sliver_reg_ofs	= 0xdc0,
-		.phy_id		= 1,
-	},
-};
-
-static struct cpsw_platform_data cpsw_data = {
-	.mdio_base		= AM335X_CPSW_MDIO_BASE,
-	.cpsw_base		= AM335X_CPSW_BASE,
-	.mdio_div		= 0xff,
-	.channels		= 8,
-	.cpdma_reg_ofs		= 0x800,
-	.slaves			= 1,
-	.slave_data		= cpsw_slaves,
-	.ale_reg_ofs		= 0xd00,
-	.ale_entries		= 1024,
-	.host_port_reg_ofs	= 0x108,
-	.hw_stats_reg_ofs	= 0x900,
-	.mac_control		= (1 << 5),
-	.control		= cpsw_control,
-	.host_port_num		= 0,
-	.version		= CPSW_CTRL_VERSION_2,
-};
-
-int board_eth_init(bd_t *bis)
-{
-	uint8_t mac_addr[6];
-	uint32_t mac_hi, mac_lo;
-
-	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
-		debug("<ethaddr> not set. Reading from E-fuse\n");
-		/* try reading mac address from efuse */
-		mac_lo = readl(&cdev->macid0l);
-		mac_hi = readl(&cdev->macid0h);
-		mac_addr[0] = mac_hi & 0xFF;
-		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
-		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
-		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
-		mac_addr[4] = mac_lo & 0xFF;
-		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
-
-		if (is_valid_ether_addr(mac_addr))
-			eth_setenv_enetaddr("ethaddr", mac_addr);
-		else
-			return -1;
-	}
-
-	if (board_is_bone()) {
-		writel(MII_MODE_ENABLE, &cdev->miisel);
-		cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
-				PHY_INTERFACE_MODE_MII;
-	} else {
-		writel(RGMII_MODE_ENABLE, &cdev->miisel);
-		cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
-				PHY_INTERFACE_MODE_RGMII;
-	}
-
-	return cpsw_register(&cpsw_data);
-}
-#endif
diff --git a/arch/arm/cpu/armv7/am33xx/clock.c b/arch/arm/cpu/armv7/am33xx/clock.c
index 2b19506..bc2abb6 100644
--- a/arch/arm/cpu/armv7/am33xx/clock.c
+++ b/arch/arm/cpu/armv7/am33xx/clock.c
@@ -44,6 +44,7 @@
 const struct cm_perpll *cmper = (struct cm_perpll *)CM_PER;
 const struct cm_wkuppll *cmwkup = (struct cm_wkuppll *)CM_WKUP;
 const struct cm_dpll *cmdpll = (struct cm_dpll *)CM_DPLL;
+const struct cm_rtc *cmrtc = (struct cm_rtc *)CM_RTC;
 
 static void enable_interface_clocks(void)
 {
@@ -114,6 +115,41 @@
 	while (readl(&cmwkup->wkup_uart0ctrl) != PRCM_MOD_EN)
 		;
 
+	/* UART1 */
+#ifdef CONFIG_SERIAL2
+	writel(PRCM_MOD_EN, &cmper->uart1clkctrl);
+	while (readl(&cmper->uart1clkctrl) != PRCM_MOD_EN)
+		;
+#endif /* CONFIG_SERIAL2 */
+
+	/* UART2 */
+#ifdef CONFIG_SERIAL3
+	writel(PRCM_MOD_EN, &cmper->uart2clkctrl);
+	while (readl(&cmper->uart2clkctrl) != PRCM_MOD_EN)
+		;
+#endif /* CONFIG_SERIAL3 */
+
+	/* UART3 */
+#ifdef CONFIG_SERIAL4
+	writel(PRCM_MOD_EN, &cmper->uart3clkctrl);
+	while (readl(&cmper->uart3clkctrl) != PRCM_MOD_EN)
+		;
+#endif /* CONFIG_SERIAL4 */
+
+	/* UART4 */
+#ifdef CONFIG_SERIAL5
+	writel(PRCM_MOD_EN, &cmper->uart4clkctrl);
+	while (readl(&cmper->uart4clkctrl) != PRCM_MOD_EN)
+		;
+#endif /* CONFIG_SERIAL5 */
+
+	/* UART5 */
+#ifdef CONFIG_SERIAL6
+	writel(PRCM_MOD_EN, &cmper->uart5clkctrl);
+	while (readl(&cmper->uart5clkctrl) != PRCM_MOD_EN)
+		;
+#endif /* CONFIG_SERIAL6 */
+
 	/* MMC0*/
 	writel(PRCM_MOD_EN, &cmper->mmc0clkctrl);
 	while (readl(&cmper->mmc0clkctrl) != PRCM_MOD_EN)
@@ -153,6 +189,11 @@
 	writel(PRCM_MOD_EN, &cmper->spi0clkctrl);
 	while (readl(&cmper->spi0clkctrl) != PRCM_MOD_EN)
 		;
+
+	/* RTC */
+	writel(PRCM_MOD_EN, &cmrtc->rtcclkctrl);
+	while (readl(&cmrtc->rtcclkctrl) != PRCM_MOD_EN)
+		;
 }
 
 static void mpu_pll_config(void)
diff --git a/arch/arm/cpu/armv7/am33xx/config.mk b/arch/arm/cpu/armv7/am33xx/config.mk
index 5750bbd..babf0eb 100644
--- a/arch/arm/cpu/armv7/am33xx/config.mk
+++ b/arch/arm/cpu/armv7/am33xx/config.mk
@@ -13,6 +13,7 @@
 #
 ifdef CONFIG_SPL_BUILD
 ALL-y	+= $(OBJTREE)/MLO
+ALL-$(CONFIG_SPL_SPI_SUPPORT) += $(OBJTREE)/MLO.byteswap
 else
 ALL-y	+= $(obj)u-boot.img
 endif
diff --git a/arch/arm/cpu/armv7/am33xx/emif4.c b/arch/arm/cpu/armv7/am33xx/emif4.c
index b2d7c0d..01e3a52 100644
--- a/arch/arm/cpu/armv7/am33xx/emif4.c
+++ b/arch/arm/cpu/armv7/am33xx/emif4.c
@@ -47,78 +47,6 @@
 static struct vtp_reg *vtpreg = (struct vtp_reg *)VTP0_CTRL_ADDR;
 static struct ddr_ctrl *ddrctrl = (struct ddr_ctrl *)DDR_CTRL_ADDR;
 
-static const struct ddr_data ddr2_data = {
-	.datardsratio0 = ((DDR2_RD_DQS<<30)|(DDR2_RD_DQS<<20)
-				|(DDR2_RD_DQS<<10)|(DDR2_RD_DQS<<0)),
-	.datawdsratio0 = ((DDR2_WR_DQS<<30)|(DDR2_WR_DQS<<20)
-				|(DDR2_WR_DQS<<10)|(DDR2_WR_DQS<<0)),
-	.datawiratio0 = ((DDR2_PHY_WRLVL<<30)|(DDR2_PHY_WRLVL<<20)
-				|(DDR2_PHY_WRLVL<<10)|(DDR2_PHY_WRLVL<<0)),
-	.datagiratio0 = ((DDR2_PHY_GATELVL<<30)|(DDR2_PHY_GATELVL<<20)
-				|(DDR2_PHY_GATELVL<<10)|(DDR2_PHY_GATELVL<<0)),
-	.datafwsratio0 = ((DDR2_PHY_FIFO_WE<<30)|(DDR2_PHY_FIFO_WE<<20)
-				|(DDR2_PHY_FIFO_WE<<10)|(DDR2_PHY_FIFO_WE<<0)),
-	.datawrsratio0 = ((DDR2_PHY_WR_DATA<<30)|(DDR2_PHY_WR_DATA<<20)
-				|(DDR2_PHY_WR_DATA<<10)|(DDR2_PHY_WR_DATA<<0)),
-	.datauserank0delay = DDR2_PHY_RANK0_DELAY,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
-};
-
-static const struct cmd_control ddr2_cmd_ctrl_data = {
-	.cmd0csratio = DDR2_RATIO,
-	.cmd0dldiff = DDR2_DLL_LOCK_DIFF,
-	.cmd0iclkout = DDR2_INVERT_CLKOUT,
-
-	.cmd1csratio = DDR2_RATIO,
-	.cmd1dldiff = DDR2_DLL_LOCK_DIFF,
-	.cmd1iclkout = DDR2_INVERT_CLKOUT,
-
-	.cmd2csratio = DDR2_RATIO,
-	.cmd2dldiff = DDR2_DLL_LOCK_DIFF,
-	.cmd2iclkout = DDR2_INVERT_CLKOUT,
-};
-
-static const struct emif_regs ddr2_emif_reg_data = {
-	.sdram_config = DDR2_EMIF_SDCFG,
-	.ref_ctrl = DDR2_EMIF_SDREF,
-	.sdram_tim1 = DDR2_EMIF_TIM1,
-	.sdram_tim2 = DDR2_EMIF_TIM2,
-	.sdram_tim3 = DDR2_EMIF_TIM3,
-	.emif_ddr_phy_ctlr_1 = DDR2_EMIF_READ_LATENCY,
-};
-
-static const struct ddr_data ddr3_data = {
-	.datardsratio0 = DDR3_RD_DQS,
-	.datawdsratio0 = DDR3_WR_DQS,
-	.datafwsratio0 = DDR3_PHY_FIFO_WE,
-	.datawrsratio0 = DDR3_PHY_WR_DATA,
-	.datadldiff0 = PHY_DLL_LOCK_DIFF,
-};
-
-static const struct cmd_control ddr3_cmd_ctrl_data = {
-	.cmd0csratio = DDR3_RATIO,
-	.cmd0dldiff = DDR3_DLL_LOCK_DIFF,
-	.cmd0iclkout = DDR3_INVERT_CLKOUT,
-
-	.cmd1csratio = DDR3_RATIO,
-	.cmd1dldiff = DDR3_DLL_LOCK_DIFF,
-	.cmd1iclkout = DDR3_INVERT_CLKOUT,
-
-	.cmd2csratio = DDR3_RATIO,
-	.cmd2dldiff = DDR3_DLL_LOCK_DIFF,
-	.cmd2iclkout = DDR3_INVERT_CLKOUT,
-};
-
-static struct emif_regs ddr3_emif_reg_data = {
-	.sdram_config = DDR3_EMIF_SDCFG,
-	.ref_ctrl = DDR3_EMIF_SDREF,
-	.sdram_tim1 = DDR3_EMIF_TIM1,
-	.sdram_tim2 = DDR3_EMIF_TIM2,
-	.sdram_tim3 = DDR3_EMIF_TIM3,
-	.zq_config = DDR3_ZQ_CFG,
-	.emif_ddr_phy_ctlr_1 = DDR3_EMIF_READ_LATENCY,
-};
-
 static void config_vtp(void)
 {
 	writel(readl(&vtpreg->vtp0ctrlreg) | VTP_CTRL_ENABLE,
@@ -134,46 +62,26 @@
 		;
 }
 
-void config_ddr(short ddr_type)
+void config_ddr(unsigned int pll, unsigned int ioctrl,
+		const struct ddr_data *data, const struct cmd_control *ctrl,
+		const struct emif_regs *regs)
 {
-	int ddr_pll, ioctrl_val;
-	const struct emif_regs *emif_regs;
-	const struct ddr_data *ddr_data;
-	const struct cmd_control *cmd_ctrl_data;
-
-	if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR2) {
-		ddr_pll = 266;
-		cmd_ctrl_data = &ddr2_cmd_ctrl_data;
-		ddr_data = &ddr2_data;
-		ioctrl_val = DDR2_IOCTRL_VALUE;
-		emif_regs = &ddr2_emif_reg_data;
-	} else if (ddr_type == EMIF_REG_SDRAM_TYPE_DDR3) {
-		ddr_pll = 303;
-		cmd_ctrl_data = &ddr3_cmd_ctrl_data;
-		ddr_data = &ddr3_data;
-		ioctrl_val = DDR3_IOCTRL_VALUE;
-		emif_regs = &ddr3_emif_reg_data;
-	} else {
-		puts("Unknown memory type");
-		hang();
-	}
-
 	enable_emif_clocks();
-	ddr_pll_config(ddr_pll);
+	ddr_pll_config(pll);
 	config_vtp();
-	config_cmd_ctrl(cmd_ctrl_data);
+	config_cmd_ctrl(ctrl);
 
-	config_ddr_data(0, ddr_data);
-	config_ddr_data(1, ddr_data);
+	config_ddr_data(0, data);
+	config_ddr_data(1, data);
 
-	config_io_ctrl(ioctrl_val);
+	config_io_ctrl(ioctrl);
 
 	/* Set CKE to be controlled by EMIF/DDR PHY */
 	writel(DDR_CKE_CTRL_NORMAL, &ddrctrl->ddrckectrl);
 
 	/* Program EMIF instance */
-	config_ddr_phy(emif_regs);
-	set_sdram_timings(emif_regs);
-	config_sdram(emif_regs);
+	config_ddr_phy(regs);
+	set_sdram_timings(regs);
+	config_sdram(regs);
 }
 #endif
diff --git a/arch/arm/cpu/armv7/am33xx/mux.c b/arch/arm/cpu/armv7/am33xx/mux.c
new file mode 100644
index 0000000..2ded472
--- /dev/null
+++ b/arch/arm/cpu/armv7/am33xx/mux.c
@@ -0,0 +1,33 @@
+/*
+ * mux.c
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/hardware.h>
+#include <asm/io.h>
+
+/*
+ * Configure the pin mux for the module
+ */
+void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux)
+{
+	int i;
+
+	if (!mod_pin_mux)
+		return;
+
+	for (i = 0; mod_pin_mux[i].reg_offset != -1; i++)
+		MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset);
+}
diff --git a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
index 1d8efb2..9979c30 100644
--- a/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
+++ b/arch/arm/cpu/armv7/omap-common/u-boot-spl.lds
@@ -47,6 +47,11 @@
 
 	. = ALIGN(4);
 	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+	.u_boot_list : {
+		#include <u-boot.lst>
+	}
+
 	. = ALIGN(4);
 	__image_copy_end = .;
 	_end = .;
diff --git a/arch/arm/cpu/armv7/omap3/board.c b/arch/arm/cpu/armv7/omap3/board.c
index 9cee1d9..f3cd81a 100644
--- a/arch/arm/cpu/armv7/omap3/board.c
+++ b/arch/arm/cpu/armv7/omap3/board.c
@@ -50,7 +50,9 @@
 /* Declarations */
 extern omap3_sysinfo sysinfo;
 static void omap3_setup_aux_cr(void);
+#ifndef CONFIG_SYS_L2CACHE_OFF
 static void omap3_invalidate_l2_cache_secure(void);
+#endif
 
 static const struct gpio_bank gpio_bank_34xx[6] = {
 	{ (void *)OMAP34XX_GPIO1_BASE, METHOD_GPIO_24XX },
@@ -410,19 +412,6 @@
 	}
 }
 
-static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
-{
-	u32 acr;
-
-	/* Read ACR */
-	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
-	acr &= ~clear_bits;
-	acr |= set_bits;
-
-	/* Write ACR - affects non-secure banked bits */
-	asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
-}
-
 static void omap3_setup_aux_cr(void)
 {
 	/* Workaround for Cortex-A8 errata: #454179 #430973
@@ -436,6 +425,19 @@
 }
 
 #ifndef CONFIG_SYS_L2CACHE_OFF
+static void omap3_update_aux_cr(u32 set_bits, u32 clear_bits)
+{
+	u32 acr;
+
+	/* Read ACR */
+	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+	acr &= ~clear_bits;
+	acr |= set_bits;
+
+	/* Write ACR - affects non-secure banked bits */
+	asm volatile ("mcr p15, 0, %0, c1, c0, 1" : : "r" (acr));
+}
+
 /* Invalidate the entire L2 cache from secure mode */
 static void omap3_invalidate_l2_cache_secure(void)
 {
diff --git a/arch/arm/cpu/armv7/socfpga/spl.c b/arch/arm/cpu/armv7/socfpga/spl.c
index 944238b..84216eb 100644
--- a/arch/arm/cpu/armv7/socfpga/spl.c
+++ b/arch/arm/cpu/armv7/socfpga/spl.c
@@ -21,7 +21,6 @@
 #include <asm/utils.h>
 #include <version.h>
 #include <image.h>
-#include <malloc.h>
 #include <asm/arch/reset_manager.h>
 #include <spl.h>
 
@@ -37,9 +36,6 @@
  */
 void spl_board_init(void)
 {
-	/* init timer for enabling delay function */
-	timer_init();
-
 	/* de-assert reset for peripherals and bridges based on handoff */
 	reset_deassert_peripherals_handoff();
 
diff --git a/arch/arm/cpu/ixp/u-boot.lds b/arch/arm/cpu/ixp/u-boot.lds
index 7199de4..81d954f 100644
--- a/arch/arm/cpu/ixp/u-boot.lds
+++ b/arch/arm/cpu/ixp/u-boot.lds
@@ -46,9 +46,11 @@
 	. = ALIGN(4);
 
 	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 
diff --git a/arch/arm/cpu/lh7a40x/config.mk b/arch/arm/cpu/lh7a40x/config.mk
deleted file mode 100644
index 1c4aa97..0000000
--- a/arch/arm/cpu/lh7a40x/config.mk
+++ /dev/null
@@ -1,33 +0,0 @@
-#
-# (C) Copyright 2002
-# Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-PLATFORM_RELFLAGS += -fno-common -ffixed-r8 -msoft-float
-
-PLATFORM_CPPFLAGS += -march=armv4
-# =========================================================================
-#
-# Supply options according to compiler version
-#
-# ========================================================================
-PF_RELFLAGS_SLB_AT := $(call cc-option,-mshort-load-bytes,$(call cc-option,-malignment-traps,))
-PLATFORM_RELFLAGS += $(PF_RELFLAGS_SLB_AT)
diff --git a/arch/arm/cpu/lh7a40x/cpu.c b/arch/arm/cpu/lh7a40x/cpu.c
deleted file mode 100644
index b193189..0000000
--- a/arch/arm/cpu/lh7a40x/cpu.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * CPU specific code
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/system.h>
-
-static void cache_flush(void);
-
-int cleanup_before_linux (void)
-{
-	/*
-	 * this function is called just before we call linux
-	 * it prepares the processor for linux
-	 *
-	 * we turn off caches etc ...
-	 */
-
-	disable_interrupts ();
-
-	/* turn off I/D-cache */
-	icache_disable();
-	dcache_disable();
-
-	/* flush I/D-cache */
-	cache_flush();
-
-	return 0;
-}
-
-/* flush I/D-cache */
-static void cache_flush (void)
-{
-	unsigned long i = 0;
-
-	asm ("mcr p15, 0, %0, c7, c7, 0": :"r" (i));
-}
diff --git a/arch/arm/cpu/lh7a40x/speed.c b/arch/arm/cpu/lh7a40x/speed.c
deleted file mode 100644
index 333ebb5..0000000
--- a/arch/arm/cpu/lh7a40x/speed.c
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * (C) Copyright 2001-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * David Mueller, ELSOFT AG, d.mueller@elsoft.ch
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <lh7a40x.h>
-
-
-/* ------------------------------------------------------------------------- */
-/* NOTE: This describes the proper use of this file.
- *
- * CONFIG_SYS_CLK_FREQ should be defined as the input frequency of the PLL.
- *
- * get_FCLK(), get_HCLK(), get_PCLK() return the clock of
- * the specified bus in HZ.
- */
-/* ------------------------------------------------------------------------- */
-
-ulong get_PLLCLK (void)
-{
-	return CONFIG_SYS_CLK_FREQ;
-}
-
-/* return FCLK frequency */
-ulong get_FCLK (void)
-{
-	lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
-	ulong maindiv1, maindiv2, prediv, ps;
-
-	/*
-	 * from userguide 6.1.1.2
-	 *
-	 * FCLK = ((MAINDIV1 +2) * (MAINDIV2 +2) * 14.7456MHz) /
-	 *                   ((PREDIV+2) * (2^PS))
-	 */
-	maindiv2 = (csc->clkset & CLKSET_MAINDIV2) >> 11;
-	maindiv1 = (csc->clkset & CLKSET_MAINDIV1) >> 7;
-	prediv = (csc->clkset & CLKSET_PREDIV) >> 2;
-	ps = (csc->clkset & CLKSET_PS) >> 16;
-
-	return (((maindiv2 + 2) * (maindiv1 + 2) * CONFIG_SYS_CLK_FREQ) /
-		((prediv + 2) * (1 << ps)));
-}
-
-
-/* return HCLK frequency */
-ulong get_HCLK (void)
-{
-	lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
-
-	return (get_FCLK () / ((csc->clkset & CLKSET_HCLKDIV) + 1));
-}
-
-/* return PCLK frequency */
-ulong get_PCLK (void)
-{
-	lh7a40x_csc_t* csc = LH7A40X_CSC_PTR;
-
-	return (get_HCLK () /
-		(1 << (((csc->clkset & CLKSET_PCLKDIV) >> 16) + 1)));
-}
diff --git a/arch/arm/cpu/lh7a40x/start.S b/arch/arm/cpu/lh7a40x/start.S
deleted file mode 100644
index 33b9269..0000000
--- a/arch/arm/cpu/lh7a40x/start.S
+++ /dev/null
@@ -1,506 +0,0 @@
-/*
- *  armboot - Startup Code for ARM920 CPU-core
- *
- *  Copyright (c) 2001	Marius Gröger <mag@sysgo.de>
- *  Copyright (c) 2002	Alex Züpke <azu@sysgo.de>
- *  Copyright (c) 2002	Gary Jennejohn <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <asm-offsets.h>
-#include <config.h>
-#include <version.h>
-
-/*
- *************************************************************************
- *
- * Jump vector table as in table 3.1 in [1]
- *
- *************************************************************************
- */
-
-
-.globl _start
-_start:	b       reset
-	ldr	pc, _undefined_instruction
-	ldr	pc, _software_interrupt
-	ldr	pc, _prefetch_abort
-	ldr	pc, _data_abort
-	ldr	pc, _not_used
-	ldr	pc, _irq
-	ldr	pc, _fiq
-
-_undefined_instruction:	.word undefined_instruction
-_software_interrupt:	.word software_interrupt
-_prefetch_abort:	.word prefetch_abort
-_data_abort:		.word data_abort
-_not_used:		.word not_used
-_irq:			.word irq
-_fiq:			.word fiq
-
-	.balignl 16,0xdeadbeef
-
-
-/*
- *************************************************************************
- *
- * Startup Code (reset vector)
- *
- * do important init only if we don't start from memory!
- * relocate armboot to ram
- * setup stack
- * jump to second stage
- *
- *************************************************************************
- */
-
-.globl _TEXT_BASE
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE
-
-/*
- * These are defined in the board-specific linker script.
- * Subtracting _start from them lets the linker put their
- * relative position in the executable instead of leaving
- * them null.
- */
-.globl _bss_start_ofs
-_bss_start_ofs:
-	.word __bss_start - _start
-
-.globl _bss_end_ofs
-_bss_end_ofs:
-	.word __bss_end__ - _start
-
-.globl _end_ofs
-_end_ofs:
-	.word _end - _start
-
-#ifdef CONFIG_USE_IRQ
-/* IRQ stack memory (calculated at run-time) */
-.globl IRQ_STACK_START
-IRQ_STACK_START:
-	.word	0x0badc0de
-
-/* IRQ stack memory (calculated at run-time) */
-.globl FIQ_STACK_START
-FIQ_STACK_START:
-	.word 0x0badc0de
-#endif
-
-/* IRQ stack memory (calculated at run-time) + 8 bytes */
-.globl IRQ_STACK_START_IN
-IRQ_STACK_START_IN:
-	.word	0x0badc0de
-
-/*
- * the actual reset code
- */
-
-reset:
-	/*
-	 * set the cpu to SVC32 mode
-	 */
-	mrs	r0,cpsr
-	bic	r0,r0,#0x1f
-	orr	r0,r0,#0xd3
-	msr	cpsr,r0
-
-#define pWDTCTL		0x80001400  /* Watchdog Timer control register */
-#define pINTENC		0x8000050C  /* Interrupt-Controller enable clear register */
-#define pCLKSET		0x80000420  /* clock divisor register */
-
-	/* disable watchdog, set watchdog control register to
-	 * all zeros (default reset)
-	 */
-	ldr     r0, =pWDTCTL
-	mov     r1, #0x0
-	str     r1, [r0]
-
-	/*
-	 * mask all IRQs by setting all bits in the INTENC register (default)
-	 */
-	mov	r1, #0xffffffff
-	ldr	r0, =pINTENC
-	str	r1, [r0]
-
-	/* FCLK:HCLK:PCLK = 1:2:2 */
-	/* default FCLK is 200 MHz, using 14.7456 MHz fin */
-	ldr	r0, =pCLKSET
-	ldr r1, =0x0004ee39
-@	ldr r1, =0x0005ee39	@ 1: 2: 4
-	str	r1, [r0]
-
-	/*
-	 * we do sys-critical inits only at reboot,
-	 * not when booting from ram!
-	 */
-#ifndef CONFIG_SKIP_LOWLEVEL_INIT
-	bl	cpu_init_crit
-#endif
-
-/* Set stackpointer in internal RAM to call board_init_f */
-call_board_init_f:
-	ldr	sp, =(CONFIG_SYS_INIT_SP_ADDR)
-	bic	sp, sp, #7 /* 8-byte alignment for ABI compliance */
-	ldr	r0,=0x00000000
-	bl	board_init_f
-
-/*------------------------------------------------------------------------------*/
-
-/*
- * void relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
- *
- */
-	.globl	relocate_code
-relocate_code:
-	mov	r4, r0	/* save addr_sp */
-	mov	r5, r1	/* save addr of gd */
-	mov	r6, r2	/* save addr of destination */
-
-	/* Set up the stack						    */
-stack_setup:
-	mov	sp, r4
-
-	adr	r0, _start
-	cmp	r0, r6
-	moveq	r9, #0		/* no relocation. relocation offset(r9) = 0 */
-	beq	clear_bss		/* skip relocation */
-	mov	r1, r6			/* r1 <- scratch for copy_loop */
-	ldr	r3, _bss_start_ofs
-	add	r2, r0, r3		/* r2 <- source end address	    */
-
-copy_loop:
-	ldmia	r0!, {r9-r10}		/* copy from source address [r0]    */
-	stmia	r1!, {r9-r10}		/* copy to   target address [r1]    */
-	cmp	r0, r2			/* until source end address [r2]    */
-	blo	copy_loop
-
-#ifndef CONFIG_SPL_BUILD
-	/*
-	 * fix .rel.dyn relocations
-	 */
-	ldr	r0, _TEXT_BASE		/* r0 <- Text base */
-	sub	r9, r6, r0		/* r9 <- relocation offset */
-	ldr	r10, _dynsym_start_ofs	/* r10 <- sym table ofs */
-	add	r10, r10, r0		/* r10 <- sym table in FLASH */
-	ldr	r2, _rel_dyn_start_ofs	/* r2 <- rel dyn start ofs */
-	add	r2, r2, r0		/* r2 <- rel dyn start in FLASH */
-	ldr	r3, _rel_dyn_end_ofs	/* r3 <- rel dyn end ofs */
-	add	r3, r3, r0		/* r3 <- rel dyn end in FLASH */
-fixloop:
-	ldr	r0, [r2]		/* r0 <- location to fix up, IN FLASH! */
-	add	r0, r0, r9		/* r0 <- location to fix up in RAM */
-	ldr	r1, [r2, #4]
-	and	r7, r1, #0xff
-	cmp	r7, #23			/* relative fixup? */
-	beq	fixrel
-	cmp	r7, #2			/* absolute fixup? */
-	beq	fixabs
-	/* ignore unknown type of fixup */
-	b	fixnext
-fixabs:
-	/* absolute fix: set location to (offset) symbol value */
-	mov	r1, r1, LSR #4		/* r1 <- symbol index in .dynsym */
-	add	r1, r10, r1		/* r1 <- address of symbol in table */
-	ldr	r1, [r1, #4]		/* r1 <- symbol value */
-	add	r1, r1, r9		/* r1 <- relocated sym addr */
-	b	fixnext
-fixrel:
-	/* relative fix: increase location by offset */
-	ldr	r1, [r0]
-	add	r1, r1, r9
-fixnext:
-	str	r1, [r0]
-	add	r2, r2, #8		/* each rel.dyn entry is 8 bytes */
-	cmp	r2, r3
-	blo	fixloop
-#endif
-
-clear_bss:
-#ifndef CONFIG_SPL_BUILD
-	ldr	r0, _bss_start_ofs
-	ldr	r1, _bss_end_ofs
-	mov	r4, r6			/* reloc addr */
-	add	r0, r0, r4
-	add	r1, r1, r4
-	mov	r2, #0x00000000		/* clear			    */
-
-clbss_l:cmp	r0, r1			/* clear loop... */
-	bhs	clbss_e			/* if reached end of bss, exit */
-	str	r2, [r0]
-	add	r0, r0, #4
-	b	clbss_l
-clbss_e:
-#endif
-
-/*
- * We are done. Do not return, instead branch to second part of board
- * initialization, now running from RAM.
- */
-	ldr	r0, _board_init_r_ofs
-	adr	r1, _start
-	add	lr, r0, r1
-	add	lr, lr, r9
-	/* setup parameters for board_init_r */
-	mov	r0, r5		/* gd_t */
-	mov	r1, r6		/* dest_addr */
-	/* jump to it ... */
-	mov	pc, lr
-
-_board_init_r_ofs:
-	.word board_init_r - _start
-
-_rel_dyn_start_ofs:
-	.word __rel_dyn_start - _start
-_rel_dyn_end_ofs:
-	.word __rel_dyn_end - _start
-_dynsym_start_ofs:
-	.word __dynsym_start - _start
-
-/*
- *************************************************************************
- *
- * CPU_init_critical registers
- *
- * setup important registers
- * setup memory timing
- *
- *************************************************************************
- */
-
-
-cpu_init_crit:
-	/*
-	 * flush v4 I/D caches
-	 */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c7, 0	/* flush v3/v4 cache */
-	mcr	p15, 0, r0, c8, c7, 0	/* flush v4 TLB */
-
-	/*
-	 * disable MMU stuff and caches
-	 */
-	mrc	p15, 0, r0, c1, c0, 0
-	bic	r0, r0, #0x00002300	@ clear bits 13, 9:8 (--V- --RS)
-	bic	r0, r0, #0x00000087	@ clear bits 7, 2:0 (B--- -CAM)
-	orr	r0, r0, #0x00000002	@ set bit 2 (A) Align
-	orr	r0, r0, #0x00001000	@ set bit 12 (I) I-Cache
-	orr	r0, r0, #0x40000000	@ set bit 30 (nF) notFastBus
-	mcr	p15, 0, r0, c1, c0, 0
-
-
-	/*
-	 * before relocating, we have to setup RAM timing
-	 * because memory timing is board-dependend, you will
-	 * find a lowlevel_init.S in your board directory.
-	 */
-	mov	ip, lr
-	bl	lowlevel_init
-	mov	lr, ip
-
-	mov	pc, lr
-
-
-/*
- *************************************************************************
- *
- * Interrupt handling
- *
- *************************************************************************
- */
-
-@
-@ IRQ stack frame.
-@
-#define S_FRAME_SIZE	72
-
-#define S_OLD_R0	68
-#define S_PSR		64
-#define S_PC		60
-#define S_LR		56
-#define S_SP		52
-
-#define S_IP		48
-#define S_FP		44
-#define S_R10		40
-#define S_R9		36
-#define S_R8		32
-#define S_R7		28
-#define S_R6		24
-#define S_R5		20
-#define S_R4		16
-#define S_R3		12
-#define S_R2		8
-#define S_R1		4
-#define S_R0		0
-
-#define MODE_SVC 0x13
-#define I_BIT	 0x80
-
-/*
- * use bad_save_user_regs for abort/prefetch/undef/swi ...
- * use irq_save_user_regs / irq_restore_user_regs for IRQ/FIQ handling
- */
-
-	.macro	bad_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	ldr	r2, IRQ_STACK_START_IN
-	ldmia	r2, {r2 - r3}			@ get pc, cpsr
-	add	r0, sp, #S_FRAME_SIZE		@ restore sp_SVC
-
-	add	r5, sp, #S_SP
-	mov	r1, lr
-	stmia	r5, {r0 - r3}			@ save sp_SVC, lr_SVC, pc, cpsr
-	mov	r0, sp
-	.endm
-
-	.macro	irq_save_user_regs
-	sub	sp, sp, #S_FRAME_SIZE
-	stmia	sp, {r0 - r12}			@ Calling r0-r12
-	add     r8, sp, #S_PC
-	stmdb   r8, {sp, lr}^                   @ Calling SP, LR
-	str     lr, [r8, #0]                    @ Save calling PC
-	mrs     r6, spsr
-	str     r6, [r8, #4]                    @ Save CPSR
-	str     r0, [r8, #8]                    @ Save OLD_R0
-	mov	r0, sp
-	.endm
-
-	.macro	irq_restore_user_regs
-	ldmia	sp, {r0 - lr}^			@ Calling r0 - lr
-	mov	r0, r0
-	ldr	lr, [sp, #S_PC]			@ Get PC
-	add	sp, sp, #S_FRAME_SIZE
-	subs	pc, lr, #4			@ return & move spsr_svc into cpsr
-	.endm
-
-	.macro get_bad_stack
-	ldr	r13, IRQ_STACK_START_IN		@ setup our mode stack
-
-	str	lr, [r13]			@ save caller lr / spsr
-	mrs	lr, spsr
-	str     lr, [r13, #4]
-
-	mov	r13, #MODE_SVC			@ prepare SVC-Mode
-	@ msr	spsr_c, r13
-	msr	spsr, r13
-	mov	lr, pc
-	movs	pc, lr
-	.endm
-
-	.macro get_irq_stack			@ setup IRQ stack
-	ldr	sp, IRQ_STACK_START
-	.endm
-
-	.macro get_fiq_stack			@ setup FIQ stack
-	ldr	sp, FIQ_STACK_START
-	.endm
-
-/*
- * exception handlers
- */
-	.align  5
-undefined_instruction:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_undefined_instruction
-
-	.align	5
-software_interrupt:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_software_interrupt
-
-	.align	5
-prefetch_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_prefetch_abort
-
-	.align	5
-data_abort:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_data_abort
-
-	.align	5
-not_used:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_not_used
-
-#ifdef CONFIG_USE_IRQ
-
-	.align	5
-irq:
-	get_irq_stack
-	irq_save_user_regs
-	bl	do_irq
-	irq_restore_user_regs
-
-	.align	5
-fiq:
-	get_fiq_stack
-	/* someone ought to write a more effiction fiq_save_user_regs */
-	irq_save_user_regs
-	bl	do_fiq
-	irq_restore_user_regs
-
-#else
-
-	.align	5
-irq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_irq
-
-	.align	5
-fiq:
-	get_bad_stack
-	bad_save_user_regs
-	bl	do_fiq
-
-#endif
-
-	.align	5
-.globl reset_cpu
-reset_cpu:
-	bl	disable_interrupts
-
-	/* Disable watchdog */
-	ldr	r1, =pWDTCTL
-	mov	r3, #0
-	str	r3, [r1]
-
-	/* reset counter */
-	ldr	r3, =0x00001984
-	str	r3, [r1, #4]
-
-	/* Enable the watchdog */
-	mov	r3, #1
-	str	r3, [r1]
-
-_loop_forever:
-	b	_loop_forever
diff --git a/arch/arm/cpu/lh7a40x/timer.c b/arch/arm/cpu/lh7a40x/timer.c
deleted file mode 100644
index 58b35b1..0000000
--- a/arch/arm/cpu/lh7a40x/timer.c
+++ /dev/null
@@ -1,182 +0,0 @@
-/*
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <lh7a40x.h>
-
-static ulong timer_load_val = 0;
-
-/* macro to read the 16 bit timer */
-static inline ulong READ_TIMER(void)
-{
-	lh7a40x_timers_t* timers = LH7A40X_TIMERS_PTR;
-	lh7a40x_timer_t* timer = &timers->timer1;
-
-	return (timer->value & 0x0000ffff);
-}
-
-static ulong timestamp;
-static ulong lastdec;
-
-int timer_init (void)
-{
-	lh7a40x_timers_t* timers = LH7A40X_TIMERS_PTR;
-	lh7a40x_timer_t* timer = &timers->timer1;
-
-	/* a periodic timer using the 508kHz source */
-	timer->control = (TIMER_PER | TIMER_CLK508K);
-
-	if (timer_load_val == 0) {
-		/*
-		 * 10ms period with 508.469kHz clock = 5084
-		 */
-		timer_load_val = CONFIG_SYS_HZ/100;
-	}
-
-	/* load value for 10 ms timeout */
-	lastdec = timer->load = timer_load_val;
-
-	/* auto load, start timer */
-	timer->control = timer->control | TIMER_EN;
-	timestamp = 0;
-
-	return (0);
-}
-
-/*
- * timer without interrupts
- */
-ulong get_timer (ulong base)
-{
-	return (get_timer_masked() - base);
-}
-
-void __udelay (unsigned long usec)
-{
-	ulong tmo,tmp;
-
-	/* normalize */
-	if (usec >= 1000) {
-		tmo = usec / 1000;
-		tmo *= CONFIG_SYS_HZ;
-		tmo /= 1000;
-	}
-	else {
-		if (usec > 1) {
-			tmo = usec * CONFIG_SYS_HZ;
-			tmo /= (1000*1000);
-		}
-		else
-			tmo = 1;
-	}
-
-	/* check for rollover during this delay */
-	tmp = get_timer (0);
-	if ((tmp + tmo) < tmp )
-		reset_timer_masked();  /* timer would roll over */
-	else
-		tmo += tmp;
-
-	while (get_timer_masked () < tmo);
-}
-
-void reset_timer_masked (void)
-{
-	/* reset time */
-	lastdec = READ_TIMER();
-	timestamp = 0;
-}
-
-ulong get_timer_masked (void)
-{
-	ulong now = READ_TIMER();
-
-	if (lastdec >= now) {
-		/* normal mode */
-		timestamp += (lastdec - now);
-	} else {
-		/* we have an overflow ... */
-		timestamp += ((lastdec + timer_load_val) - now);
-	}
-	lastdec = now;
-
-	return timestamp;
-}
-
-void udelay_masked (unsigned long usec)
-{
-	ulong tmo;
-	ulong endtime;
-	signed long diff;
-
-	/* normalize */
-	if (usec >= 1000) {
-		tmo = usec / 1000;
-		tmo *= CONFIG_SYS_HZ;
-		tmo /= 1000;
-	} else {
-		if (usec > 1) {
-			tmo = usec * CONFIG_SYS_HZ;
-			tmo /= (1000*1000);
-		} else {
-			tmo = 1;
-		}
-	}
-
-	endtime = get_timer_masked () + tmo;
-
-	do {
-		ulong now = get_timer_masked ();
-		diff = endtime - now;
-	} while (diff >= 0);
-}
-
-/*
- * This function is derived from PowerPC code (read timebase as long long).
- * On ARM it just returns the timer value.
- */
-unsigned long long get_ticks(void)
-{
-	return get_timer(0);
-}
-
-/*
- * This function is derived from PowerPC code (timebase clock frequency).
- * On ARM it returns the number of timer ticks per second.
- */
-ulong get_tbclk (void)
-{
-	ulong tbclk;
-
-	tbclk = timer_load_val * 100;
-
-	return tbclk;
-}
diff --git a/arch/arm/cpu/tegra20-common/emc.c b/arch/arm/cpu/tegra20-common/emc.c
index 97420d7..90edf00 100644
--- a/arch/arm/cpu/tegra20-common/emc.c
+++ b/arch/arm/cpu/tegra20-common/emc.c
@@ -257,7 +257,7 @@
 int tegra_set_emc(const void *blob, unsigned rate)
 {
 	struct emc_ctlr *emc;
-	const u32 *table;
+	const u32 *table = NULL;
 	int err, i;
 
 	err = decode_emc(blob, rate, &emc, &table);
diff --git a/arch/arm/cpu/u-boot.lds b/arch/arm/cpu/u-boot.lds
index e49ca0c..e6b202b 100644
--- a/arch/arm/cpu/u-boot.lds
+++ b/arch/arm/cpu/u-boot.lds
@@ -34,8 +34,8 @@
 	.text :
 	{
 		__image_copy_start = .;
-		CPUDIR/start.o (.text)
-		*(.text)
+		CPUDIR/start.o (.text*)
+		*(.text*)
 	}
 
 	. = ALIGN(4);
@@ -43,15 +43,17 @@
 
 	. = ALIGN(4);
 	.data : {
-		*(.data)
+		*(.data*)
 	}
 
 	. = ALIGN(4);
 
 	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 
@@ -81,7 +83,7 @@
 
 	.bss __rel_dyn_start (OVERLAY) : {
 		__bss_start = .;
-		*(.bss)
+		*(.bss*)
 		 . = ALIGN(4);
 		__bss_end__ = .;
 	}
@@ -92,3 +94,7 @@
 	/DISCARD/ : { *(.interp*) }
 	/DISCARD/ : { *(.gnu*) }
 }
+
+#if defined(CONFIG_SPL_TEXT_BASE) && defined(CONFIG_SPL_MAX_SIZE)
+ASSERT(__bss_end__ < (CONFIG_SPL_TEXT_BASE + CONFIG_SPL_MAX_SIZE), "SPL image too big");
+#endif
diff --git a/arch/arm/imx-common/cmd_bmode.c b/arch/arm/imx-common/cmd_bmode.c
index 02fe72e..ddc14b0 100644
--- a/arch/arm/imx-common/cmd_bmode.c
+++ b/arch/arm/imx-common/cmd_bmode.c
@@ -24,6 +24,7 @@
 #include <asm/io.h>
 #include <asm/imx-common/boot_mode.h>
 #include <malloc.h>
+#include <command.h>
 
 static const struct boot_mode *modes[2];
 
@@ -103,9 +104,11 @@
 	int size;
 	char *dest;
 
-	if (__u_boot_cmd_bmode.usage) {
-		free(__u_boot_cmd_bmode.usage);
-		__u_boot_cmd_bmode.usage = NULL;
+	cmd_tbl_t *entry = ll_entry_get(cmd_tbl_t, bmode, cmd);
+
+	if (entry->usage) {
+		free(entry->usage);
+		entry->usage = NULL;
 	}
 
 	modes[0] = p;
@@ -114,6 +117,6 @@
 	dest = malloc(size);
 	if (dest) {
 		create_usage(dest);
-		__u_boot_cmd_bmode.usage = dest;
+		entry->usage = dest;
 	}
 }
diff --git a/arch/arm/include/asm/arch-am33xx/cpu.h b/arch/arm/include/asm/arch-am33xx/cpu.h
index 6cfbef7..819fd2f 100644
--- a/arch/arm/include/asm/arch-am33xx/cpu.h
+++ b/arch/arm/include/asm/arch-am33xx/cpu.h
@@ -169,6 +169,12 @@
 	unsigned int clktimer2clk;	/* offset 0x08 */
 };
 
+/* Control Module RTC registers */
+struct cm_rtc {
+	unsigned int rtcclkctrl;	/* offset 0x0 */
+	unsigned int clkstctrl;		/* offset 0x4 */
+};
+
 /* Watchdog timer registers */
 struct wd_timer {
 	unsigned int resv1[4];
@@ -218,6 +224,15 @@
 	unsigned int tcar2;		/* offset 0x58 */
 };
 
+/* RTC Registers */
+struct rtc_regs {
+	unsigned int res[21];
+	unsigned int osc;		/* offset 0x54 */
+	unsigned int res2[5];
+	unsigned int kick0r;		/* offset 0x6c */
+	unsigned int kick1r;		/* offset 0x70 */
+};
+
 /* UART Registers */
 struct uart_sys {
 	unsigned int resv1[21];
diff --git a/arch/arm/include/asm/arch-am33xx/ddr_defs.h b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
index 6b22c45..8e69fb6 100644
--- a/arch/arm/include/asm/arch-am33xx/ddr_defs.h
+++ b/arch/arm/include/asm/arch-am33xx/ddr_defs.h
@@ -29,40 +29,41 @@
 #define PHY_DLL_LOCK_DIFF	0x0
 #define DDR_CKE_CTRL_NORMAL	0x1
 
-#define DDR2_EMIF_READ_LATENCY	0x100005	/* Enable Dynamic Power Down */
-#define DDR2_EMIF_TIM1		0x0666B3C9
-#define DDR2_EMIF_TIM2		0x243631CA
-#define DDR2_EMIF_TIM3		0x0000033F
-#define DDR2_EMIF_SDCFG		0x41805332
-#define DDR2_EMIF_SDREF		0x0000081a
-#define DDR2_DLL_LOCK_DIFF	0x0
-#define DDR2_RATIO		0x80
-#define DDR2_INVERT_CLKOUT	0x00
-#define DDR2_RD_DQS		0x12
-#define DDR2_WR_DQS		0x00
-#define DDR2_PHY_WRLVL		0x00
-#define DDR2_PHY_GATELVL	0x00
-#define DDR2_PHY_WR_DATA	0x40
-#define DDR2_PHY_FIFO_WE	0x80
-#define DDR2_PHY_RANK0_DELAY	0x1
-#define DDR2_IOCTRL_VALUE	0x18B
+/* Micron MT47H128M16RT-25E */
+#define MT47H128M16RT25E_EMIF_READ_LATENCY	0x100005
+#define MT47H128M16RT25E_EMIF_TIM1		0x0666B3C9
+#define MT47H128M16RT25E_EMIF_TIM2		0x243631CA
+#define MT47H128M16RT25E_EMIF_TIM3		0x0000033F
+#define MT47H128M16RT25E_EMIF_SDCFG		0x41805332
+#define MT47H128M16RT25E_EMIF_SDREF		0x0000081a
+#define MT47H128M16RT25E_DLL_LOCK_DIFF		0x0
+#define MT47H128M16RT25E_RATIO			0x80
+#define MT47H128M16RT25E_INVERT_CLKOUT		0x00
+#define MT47H128M16RT25E_RD_DQS			0x12
+#define MT47H128M16RT25E_WR_DQS			0x00
+#define MT47H128M16RT25E_PHY_WRLVL		0x00
+#define MT47H128M16RT25E_PHY_GATELVL		0x00
+#define MT47H128M16RT25E_PHY_WR_DATA		0x40
+#define MT47H128M16RT25E_PHY_FIFO_WE		0x80
+#define MT47H128M16RT25E_PHY_RANK0_DELAY		0x1
+#define MT47H128M16RT25E_IOCTRL_VALUE		0x18B
 
 /* Micron MT41J128M16JT-125 */
-#define DDR3_EMIF_READ_LATENCY	0x06
-#define DDR3_EMIF_TIM1		0x0888A39B
-#define DDR3_EMIF_TIM2		0x26337FDA
-#define DDR3_EMIF_TIM3		0x501F830F
-#define DDR3_EMIF_SDCFG		0x61C04AB2
-#define DDR3_EMIF_SDREF		0x0000093B
-#define DDR3_ZQ_CFG		0x50074BE4
-#define DDR3_DLL_LOCK_DIFF	0x1
-#define DDR3_RATIO		0x40
-#define DDR3_INVERT_CLKOUT	0x1
-#define DDR3_RD_DQS		0x3B
-#define DDR3_WR_DQS		0x85
-#define DDR3_PHY_WR_DATA	0xC1
-#define DDR3_PHY_FIFO_WE	0x100
-#define DDR3_IOCTRL_VALUE	0x18B
+#define MT41J128MJT125_EMIF_READ_LATENCY	0x06
+#define MT41J128MJT125_EMIF_TIM1		0x0888A39B
+#define MT41J128MJT125_EMIF_TIM2		0x26337FDA
+#define MT41J128MJT125_EMIF_TIM3		0x501F830F
+#define MT41J128MJT125_EMIF_SDCFG		0x61C04AB2
+#define MT41J128MJT125_EMIF_SDREF		0x0000093B
+#define MT41J128MJT125_ZQ_CFG			0x50074BE4
+#define MT41J128MJT125_DLL_LOCK_DIFF		0x1
+#define MT41J128MJT125_RATIO			0x40
+#define MT41J128MJT125_INVERT_CLKOUT		0x1
+#define MT41J128MJT125_RD_DQS			0x3B
+#define MT41J128MJT125_WR_DQS			0x85
+#define MT41J128MJT125_PHY_WR_DATA		0xC1
+#define MT41J128MJT125_PHY_FIFO_WE		0x100
+#define MT41J128MJT125_IOCTRL_VALUE		0x18B
 
 /**
  * Configure SDRAM
@@ -189,6 +190,8 @@
 	unsigned int ddrckectrl;
 };
 
-void config_ddr(short ddr_type);
+void config_ddr(unsigned int pll, unsigned int ioctrl,
+		const struct ddr_data *data, const struct cmd_control *ctrl,
+		const struct emif_regs *regs);
 
 #endif  /* _DDR_DEFS_H */
diff --git a/arch/arm/include/asm/arch-am33xx/hardware.h b/arch/arm/include/asm/arch-am33xx/hardware.h
index 62332f2..5bd4bc8 100644
--- a/arch/arm/include/asm/arch-am33xx/hardware.h
+++ b/arch/arm/include/asm/arch-am33xx/hardware.h
@@ -61,6 +61,7 @@
 #define CM_WKUP				0x44E00400
 #define CM_DPLL				0x44E00500
 #define CM_DEVICE			0x44E00700
+#define CM_RTC				0x44E00800
 #define CM_CEFUSE			0x44E00A00
 #define PRM_DEVICE			0x44E00F00
 
@@ -83,4 +84,7 @@
 #define AM335X_CPSW_BASE		0x4A100000
 #define AM335X_CPSW_MDIO_BASE		0x4A101000
 
+/* RTC base address */
+#define AM335X_RTC_BASE			0x44E3E000
+
 #endif /* __AM33XX_HARDWARE_H */
diff --git a/arch/arm/include/asm/arch-am33xx/mux.h b/arch/arm/include/asm/arch-am33xx/mux.h
new file mode 100644
index 0000000..aed6b00
--- /dev/null
+++ b/arch/arm/include/asm/arch-am33xx/mux.h
@@ -0,0 +1,261 @@
+/*
+ * mux.h
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MUX_H_
+#define _MUX_H_
+
+#include <common.h>
+#include <asm/io.h>
+
+#define MUX_CFG(value, offset)	\
+	__raw_writel(value, (CTRL_BASE + offset));
+
+/* PAD Control Fields */
+#define SLEWCTRL	(0x1 << 6)
+#define RXACTIVE	(0x1 << 5)
+#define PULLUP_EN	(0x1 << 4) /* Pull UP Selection */
+#define PULLUDEN	(0x0 << 3) /* Pull up enabled */
+#define PULLUDDIS	(0x1 << 3) /* Pull up disabled */
+#define MODE(val)	val	/* used for Readability */
+
+/*
+ * PAD CONTROL OFFSETS
+ * Field names corresponds to the pad signal name
+ */
+struct pad_signals {
+	int gpmc_ad0;
+	int gpmc_ad1;
+	int gpmc_ad2;
+	int gpmc_ad3;
+	int gpmc_ad4;
+	int gpmc_ad5;
+	int gpmc_ad6;
+	int gpmc_ad7;
+	int gpmc_ad8;
+	int gpmc_ad9;
+	int gpmc_ad10;
+	int gpmc_ad11;
+	int gpmc_ad12;
+	int gpmc_ad13;
+	int gpmc_ad14;
+	int gpmc_ad15;
+	int gpmc_a0;
+	int gpmc_a1;
+	int gpmc_a2;
+	int gpmc_a3;
+	int gpmc_a4;
+	int gpmc_a5;
+	int gpmc_a6;
+	int gpmc_a7;
+	int gpmc_a8;
+	int gpmc_a9;
+	int gpmc_a10;
+	int gpmc_a11;
+	int gpmc_wait0;
+	int gpmc_wpn;
+	int gpmc_be1n;
+	int gpmc_csn0;
+	int gpmc_csn1;
+	int gpmc_csn2;
+	int gpmc_csn3;
+	int gpmc_clk;
+	int gpmc_advn_ale;
+	int gpmc_oen_ren;
+	int gpmc_wen;
+	int gpmc_be0n_cle;
+	int lcd_data0;
+	int lcd_data1;
+	int lcd_data2;
+	int lcd_data3;
+	int lcd_data4;
+	int lcd_data5;
+	int lcd_data6;
+	int lcd_data7;
+	int lcd_data8;
+	int lcd_data9;
+	int lcd_data10;
+	int lcd_data11;
+	int lcd_data12;
+	int lcd_data13;
+	int lcd_data14;
+	int lcd_data15;
+	int lcd_vsync;
+	int lcd_hsync;
+	int lcd_pclk;
+	int lcd_ac_bias_en;
+	int mmc0_dat3;
+	int mmc0_dat2;
+	int mmc0_dat1;
+	int mmc0_dat0;
+	int mmc0_clk;
+	int mmc0_cmd;
+	int mii1_col;
+	int mii1_crs;
+	int mii1_rxerr;
+	int mii1_txen;
+	int mii1_rxdv;
+	int mii1_txd3;
+	int mii1_txd2;
+	int mii1_txd1;
+	int mii1_txd0;
+	int mii1_txclk;
+	int mii1_rxclk;
+	int mii1_rxd3;
+	int mii1_rxd2;
+	int mii1_rxd1;
+	int mii1_rxd0;
+	int rmii1_refclk;
+	int mdio_data;
+	int mdio_clk;
+	int spi0_sclk;
+	int spi0_d0;
+	int spi0_d1;
+	int spi0_cs0;
+	int spi0_cs1;
+	int ecap0_in_pwm0_out;
+	int uart0_ctsn;
+	int uart0_rtsn;
+	int uart0_rxd;
+	int uart0_txd;
+	int uart1_ctsn;
+	int uart1_rtsn;
+	int uart1_rxd;
+	int uart1_txd;
+	int i2c0_sda;
+	int i2c0_scl;
+	int mcasp0_aclkx;
+	int mcasp0_fsx;
+	int mcasp0_axr0;
+	int mcasp0_ahclkr;
+	int mcasp0_aclkr;
+	int mcasp0_fsr;
+	int mcasp0_axr1;
+	int mcasp0_ahclkx;
+	int xdma_event_intr0;
+	int xdma_event_intr1;
+	int nresetin_out;
+	int porz;
+	int nnmi;
+	int osc0_in;
+	int osc0_out;
+	int rsvd1;
+	int tms;
+	int tdi;
+	int tdo;
+	int tck;
+	int ntrst;
+	int emu0;
+	int emu1;
+	int osc1_in;
+	int osc1_out;
+	int pmic_power_en;
+	int rtc_porz;
+	int rsvd2;
+	int ext_wakeup;
+	int enz_kaldo_1p8v;
+	int usb0_dm;
+	int usb0_dp;
+	int usb0_ce;
+	int usb0_id;
+	int usb0_vbus;
+	int usb0_drvvbus;
+	int usb1_dm;
+	int usb1_dp;
+	int usb1_ce;
+	int usb1_id;
+	int usb1_vbus;
+	int usb1_drvvbus;
+	int ddr_resetn;
+	int ddr_csn0;
+	int ddr_cke;
+	int ddr_ck;
+	int ddr_nck;
+	int ddr_casn;
+	int ddr_rasn;
+	int ddr_wen;
+	int ddr_ba0;
+	int ddr_ba1;
+	int ddr_ba2;
+	int ddr_a0;
+	int ddr_a1;
+	int ddr_a2;
+	int ddr_a3;
+	int ddr_a4;
+	int ddr_a5;
+	int ddr_a6;
+	int ddr_a7;
+	int ddr_a8;
+	int ddr_a9;
+	int ddr_a10;
+	int ddr_a11;
+	int ddr_a12;
+	int ddr_a13;
+	int ddr_a14;
+	int ddr_a15;
+	int ddr_odt;
+	int ddr_d0;
+	int ddr_d1;
+	int ddr_d2;
+	int ddr_d3;
+	int ddr_d4;
+	int ddr_d5;
+	int ddr_d6;
+	int ddr_d7;
+	int ddr_d8;
+	int ddr_d9;
+	int ddr_d10;
+	int ddr_d11;
+	int ddr_d12;
+	int ddr_d13;
+	int ddr_d14;
+	int ddr_d15;
+	int ddr_dqm0;
+	int ddr_dqm1;
+	int ddr_dqs0;
+	int ddr_dqsn0;
+	int ddr_dqs1;
+	int ddr_dqsn1;
+	int ddr_vref;
+	int ddr_vtp;
+	int ddr_strben0;
+	int ddr_strben1;
+	int ain7;
+	int ain6;
+	int ain5;
+	int ain4;
+	int ain3;
+	int ain2;
+	int ain1;
+	int ain0;
+	int vrefp;
+	int vrefn;
+};
+
+struct module_pin_mux {
+	short reg_offset;
+	unsigned char val;
+};
+
+/* Pad control register offset */
+#define PAD_CTRL_BASE	0x800
+#define OFFSET(x)	(unsigned int) (&((struct pad_signals *) \
+				(PAD_CTRL_BASE))->x)
+
+/*
+ * Configure the pin mux for the module
+ */
+void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux);
+
+#endif
diff --git a/arch/arm/include/asm/arch-am33xx/spl.h b/arch/arm/include/asm/arch-am33xx/spl.h
index 63ed10b..644ff35 100644
--- a/arch/arm/include/asm/arch-am33xx/spl.h
+++ b/arch/arm/include/asm/arch-am33xx/spl.h
@@ -27,6 +27,7 @@
 #define BOOT_DEVICE_NAND	5
 #define BOOT_DEVICE_MMC1	8
 #define BOOT_DEVICE_MMC2	9	/* eMMC or daughter card */
+#define BOOT_DEVICE_SPI		11
 #define BOOT_DEVICE_UART	65
 #define BOOT_DEVICE_CPGMAC	70
 #define BOOT_DEVICE_MMC2_2      0xFF
diff --git a/arch/arm/include/asm/arch-am33xx/sys_proto.h b/arch/arm/include/asm/arch-am33xx/sys_proto.h
index 819ea65..9cf35e0 100644
--- a/arch/arm/include/asm/arch-am33xx/sys_proto.h
+++ b/arch/arm/include/asm/arch-am33xx/sys_proto.h
@@ -19,24 +19,6 @@
 #ifndef _SYS_PROTO_H_
 #define _SYS_PROTO_H_
 
-/*
- * AM335x parts define a system EEPROM that defines certain sub-fields.
- * We use these fields to in turn see what board we are on, and what
- * that might require us to set or not set.
- */
-#define HDR_NO_OF_MAC_ADDR	3
-#define HDR_ETH_ALEN		6
-#define HDR_NAME_LEN		8
-
-struct am335x_baseboard_id {
-	unsigned int  magic;
-	char name[HDR_NAME_LEN];
-	char version[4];
-	char serial[12];
-	char config[32];
-	char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
-};
-
 #define BOARD_REV_ID	0x0
 
 u32 get_cpu_rev(void);
@@ -51,13 +33,4 @@
 void setup_clocks_for_console(void);
 void ddr_pll_config(unsigned int ddrpll_M);
 
-/*
- * We have three pin mux functions that must exist.  We must be able to enable
- * uart0, for initial output and i2c0 to read the main EEPROM.  We then have a
- * main pinmux function that can be overridden to enable all other pinmux that
- * is required on the board.
- */
-void enable_uart0_pin_mux(void);
-void enable_i2c0_pin_mux(void);
-void enable_board_pin_mux(struct am335x_baseboard_id *header);
 #endif
diff --git a/arch/arm/include/asm/arch-arm720t/hardware.h b/arch/arm/include/asm/arch-arm720t/hardware.h
index 0a357b1..0a76610 100644
--- a/arch/arm/include/asm/arch-arm720t/hardware.h
+++ b/arch/arm/include/asm/arch-arm720t/hardware.h
@@ -24,9 +24,7 @@
  * MA 02111-1307 USA
  */
 
-#if defined(CONFIG_NETARM)
-#include <asm/arch-arm720t/netarm_registers.h>
-#elif defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
+#if defined(CONFIG_INTEGRATOR) && defined(CONFIG_ARCH_INTEGRATOR)
 /* include IntegratorCP/CM720T specific hardware file if there was one */
 #else
 #error No hardware file defined for this configuration
diff --git a/arch/arm/include/asm/arch-arm720t/netarm_dma_module.h b/arch/arm/include/asm/arch-arm720t/netarm_dma_module.h
deleted file mode 100644
index 328eaf0..0000000
--- a/arch/arm/include/asm/arch-arm720t/netarm_dma_module.h
+++ /dev/null
@@ -1,182 +0,0 @@
-/* * include/asm-armnommu/arch-netarm/netarm_dma_module.h
- *
- * Copyright (C) 2000 NETsilicon, Inc.
- * Copyright (C) 2000 WireSpeed Communications Corporation
- *
- * This software is copyrighted by WireSpeed. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall WireSpeed
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Joe deBlaquiere
- *             David Smith
- */
-
-#ifndef __NETARM_DMA_MODULE_REGISTERS_H
-#define __NETARM_DMA_MODULE_REGISTERS_H
-
-/* GEN unit register offsets */
-
-#define	NETARM_DMA_MODULE_BASE		(0xFF900000)
-
-#define get_dma_reg_addr(c) ((volatile unsigned int *)(NETARM_DMA_MODULE_BASE + (c)))
-
-#define	NETARM_DMA1A_BFR_DESCRPTOR_PTR	(0x00)
-#define	NETARM_DMA1A_CONTROL		(0x10)
-#define	NETARM_DMA1A_STATUS		(0x14)
-#define	NETARM_DMA1B_BFR_DESCRPTOR_PTR	(0x20)
-#define	NETARM_DMA1B_CONTROL		(0x30)
-#define	NETARM_DMA1B_STATUS		(0x34)
-#define	NETARM_DMA1C_BFR_DESCRPTOR_PTR	(0x40)
-#define	NETARM_DMA1C_CONTROL		(0x50)
-#define	NETARM_DMA1C_STATUS		(0x54)
-#define	NETARM_DMA1D_BFR_DESCRPTOR_PTR	(0x60)
-#define	NETARM_DMA1D_CONTROL		(0x70)
-#define	NETARM_DMA1D_STATUS		(0x74)
-
-#define	NETARM_DMA2_BFR_DESCRPTOR_PTR	(0x80)
-#define	NETARM_DMA2_CONTROL		(0x90)
-#define	NETARM_DMA2_STATUS		(0x94)
-
-#define	NETARM_DMA3_BFR_DESCRPTOR_PTR	(0xA0)
-#define	NETARM_DMA3_CONTROL		(0xB0)
-#define	NETARM_DMA3_STATUS		(0xB4)
-
-#define	NETARM_DMA4_BFR_DESCRPTOR_PTR	(0xC0)
-#define	NETARM_DMA4_CONTROL		(0xD0)
-#define	NETARM_DMA4_STATUS		(0xD4)
-
-#define	NETARM_DMA5_BFR_DESCRPTOR_PTR	(0xE0)
-#define	NETARM_DMA5_CONTROL		(0xF0)
-#define	NETARM_DMA5_STATUS		(0xF4)
-
-#define	NETARM_DMA6_BFR_DESCRPTOR_PTR	(0x100)
-#define	NETARM_DMA6_CONTROL		(0x110)
-#define	NETARM_DMA6_STATUS		(0x114)
-
-#define	NETARM_DMA7_BFR_DESCRPTOR_PTR	(0x120)
-#define	NETARM_DMA7_CONTROL		(0x130)
-#define	NETARM_DMA7_STATUS		(0x134)
-
-#define	NETARM_DMA8_BFR_DESCRPTOR_PTR	(0x140)
-#define	NETARM_DMA8_CONTROL		(0x150)
-#define	NETARM_DMA8_STATUS		(0x154)
-
-#define	NETARM_DMA9_BFR_DESCRPTOR_PTR	(0x160)
-#define	NETARM_DMA9_CONTROL		(0x170)
-#define	NETARM_DMA9_STATUS		(0x174)
-
-#define	NETARM_DMA10_BFR_DESCRPTOR_PTR	(0x180)
-#define	NETARM_DMA10_CONTROL		(0x190)
-#define	NETARM_DMA10_STATUS		(0x194)
-
-/* select bitfield defintions */
-
-/* DMA Control Register ( 0xFF90_0XX0 ) */
-
-#define NETARM_DMA_CTL_ENABLE		(0x80000000)
-
-#define NETARM_DMA_CTL_ABORT		(0x40000000)
-
-#define NETARM_DMA_CTL_BUS_100_PERCENT	(0x00000000)
-#define NETARM_DMA_CTL_BUS_75_PERCENT	(0x10000000)
-#define NETARM_DMA_CTL_BUS_50_PERCENT	(0x20000000)
-#define NETARM_DMA_CTL_BUS_25_PERCENT	(0x30000000)
-
-#define NETARM_DMA_CTL_BUS_MASK		(0x30000000)
-
-#define NETARM_DMA_CTL_MODE_FB_TO_MEM	(0x00000000)
-#define NETARM_DMA_CTL_MODE_FB_FROM_MEM	(0x04000000)
-#define NETARM_DMA_CTL_MODE_MEM_TO_MEM	(0x08000000)
-
-#define NETARM_DMA_CTL_BURST_NONE	(0x00000000)
-#define NETARM_DMA_CTL_BURST_8_BYTE	(0x01000000)
-#define NETARM_DMA_CTL_BURST_16_BYTE	(0x02000000)
-
-#define NETARM_DMA_CTL_BURST_MASK	(0x03000000)
-
-#define NETARM_DMA_CTL_SRC_INCREMENT	(0x00200000)
-
-#define NETARM_DMA_CTL_DST_INCREMENT	(0x00100000)
-
-/* these apply only to ext xfers on DMA 3 or 4 */
-
-#define NETARM_DMA_CTL_CH_3_4_REQ_EXT	(0x00800000)
-
-#define NETARM_DMA_CTL_CH_3_4_DATA_32	(0x00000000)
-#define NETARM_DMA_CTL_CH_3_4_DATA_16	(0x00010000)
-#define NETARM_DMA_CTL_CH_3_4_DATA_8	(0x00020000)
-
-#define NETARM_DMA_CTL_STATE(X)	((X) & 0xFC00)
-#define NETARM_DMA_CTL_INDEX(X)	((X) & 0x03FF)
-
-/* DMA Status Register ( 0xFF90_0XX4 ) */
-
-#define NETARM_DMA_STAT_NC_INTPEN	(0x80000000)
-#define NETARM_DMA_STAT_EC_INTPEN	(0x40000000)
-#define NETARM_DMA_STAT_NR_INTPEN	(0x20000000)
-#define NETARM_DMA_STAT_CA_INTPEN	(0x10000000)
-#define NETARM_DMA_STAT_INTPEN_MASK	(0xF0000000)
-
-#define NETARM_DMA_STAT_NC_INT_EN	(0x00800000)
-#define NETARM_DMA_STAT_EC_INT_EN	(0x00400000)
-#define NETARM_DMA_STAT_NR_INT_EN	(0x00200000)
-#define NETARM_DMA_STAT_CA_INT_EN	(0x00100000)
-#define NETARM_DMA_STAT_INT_EN_MASK	(0x00F00000)
-
-#define NETARM_DMA_STAT_WRAP		(0x00080000)
-#define NETARM_DMA_STAT_IDONE		(0x00040000)
-#define NETARM_DMA_STAT_LAST		(0x00020000)
-#define NETARM_DMA_STAT_FULL		(0x00010000)
-
-#define	NETARM_DMA_STAT_BUFLEN(X)	((X) & 0x7FFF)
-
-/* DMA Buffer Descriptor Word 0 bitfields. */
-
-#define NETARM_DMA_BD0_WRAP		(0x80000000)
-#define NETARM_DMA_BD0_IDONE		(0x40000000)
-#define NETARM_DMA_BD0_LAST		(0x20000000)
-#define NETARM_DMA_BD0_BUFPTR_MASK	(0x1FFFFFFF)
-
-/* DMA Buffer Descriptor Word 1 bitfields. */
-
-#define NETARM_DMA_BD1_STATUS_MASK	(0xFFFF0000)
-#define NETARM_DMA_BD1_FULL		(0x00008000)
-#define NETARM_DMA_BD1_BUFLEN_MASK	(0x00007FFF)
-
-#ifndef	__ASSEMBLER__
-
-typedef	struct __NETARM_DMA_Buff_Desc_FlyBy
-{
-	unsigned int word0;
-	unsigned int word1;
-} NETARM_DMA_Buff_Desc_FlyBy, *pNETARM_DMA_Buff_Desc_FlyBy ;
-
-typedef	struct __NETARM_DMA_Buff_Desc_M_to_M
-{
-	unsigned int word0;
-	unsigned int word1;
-	unsigned int word2;
-	unsigned int word3;
-} NETARM_DMA_Buff_Desc_M_to_M, *pNETARM_DMA_Buff_Desc_M_to_M ;
-
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/arch-arm720t/netarm_eni_module.h b/arch/arm/include/asm/arch-arm720t/netarm_eni_module.h
deleted file mode 100644
index 317b354..0000000
--- a/arch/arm/include/asm/arch-arm720t/netarm_eni_module.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-armnommu/arch-netarm/netarm_eni_module.h
- *
- * Copyright (C) 2000 NETsilicon, Inc.
- * Copyright (C) 2000 WireSpeed Communications Corporation
- *
- * This software is copyrighted by WireSpeed. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall WireSpeed
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : David Smith
- */
-
-#ifndef __NETARM_ENI_MODULE_REGISTERS_H
-#define __NETARM_ENI_MODULE_REGISTERS_H
-
-/* ENI unit register offsets */
-
-/* #ifdef CONFIG_ARCH_NETARM */
-#define	NETARM_ENI_MODULE_BASE		(0xFFA00000)
-/* #endif / * CONFIG_ARCH_NETARM */
-
-#define get_eni_reg_addr(c) ((volatile unsigned int *)(NETARM_ENI_MODULE_BASE + (c)))
-#define get_eni_ctl_reg_addr(minor) \
-	(get_eni_reg_addr(NETARM_ENI_1284_PORT1_CONTROL) + (minor))
-
-#define	NETARM_ENI_GENERAL_CONTROL	(0x00)
-#define	NETARM_ENI_STATUS_CONTROL	(0x04)
-#define	NETARM_ENI_FIFO_MODE_DATA	(0x08)
-
-#define	NETARM_ENI_1284_PORT1_CONTROL	(0x10)
-#define	NETARM_ENI_1284_PORT2_CONTROL	(0x14)
-#define	NETARM_ENI_1284_PORT3_CONTROL	(0x18)
-#define	NETARM_ENI_1284_PORT4_CONTROL	(0x1c)
-
-#define	NETARM_ENI_1284_CHANNEL1_DATA	(0x20)
-#define	NETARM_ENI_1284_CHANNEL2_DATA	(0x24)
-#define	NETARM_ENI_1284_CHANNEL3_DATA	(0x28)
-#define	NETARM_ENI_1284_CHANNEL4_DATA	(0x2c)
-
-#define	NETARM_ENI_ENI_CONTROL		(0x30)
-#define	NETARM_ENI_ENI_PULSED_INTR	(0x34)
-#define	NETARM_ENI_ENI_SHARED_RAM_ADDR	(0x38)
-#define	NETARM_ENI_ENI_SHARED		(0x3c)
-
-/* select bitfield defintions */
-
-/* General Control Register (0xFFA0_0000) */
-
-#define NETARM_ENI_GCR_ENIMODE_IEEE1284	(0x00000001)
-#define NETARM_ENI_GCR_ENIMODE_SHRAM16	(0x00000004)
-#define NETARM_ENI_GCR_ENIMODE_SHRAM8	(0x00000005)
-#define NETARM_ENI_GCR_ENIMODE_FIFO16	(0x00000006)
-#define NETARM_ENI_GCR_ENIMODE_FIFO8	(0x00000007)
-
-#define NETARM_ENI_GCR_ENIMODE_MASK	(0x00000007)
-
-/* IEEE 1284 Port Control Registers 1-4 (0xFFA0_0010, 0xFFA0_0014,
-   0xFFA0_0018, 0xFFA0_001c) */
-
-#define NETARM_ENI_1284PC_PORT_ENABLE	(0x80000000)
-#define NETARM_ENI_1284PC_DMA_ENABLE	(0x40000000)
-#define NETARM_ENI_1284PC_OBE_INT_EN	(0x20000000)
-#define NETARM_ENI_1284PC_ACK_INT_EN	(0x10000000)
-#define NETARM_ENI_1284PC_ECP_MODE	(0x08000000)
-#define NETARM_ENI_1284PC_LOOPBACK_MODE	(0x04000000)
-
-#define NETARM_ENI_1284PC_STROBE_TIME0	(0x00000000) /* 0.5 uS */
-#define NETARM_ENI_1284PC_STROBE_TIME1	(0x01000000) /* 1.0 uS */
-#define NETARM_ENI_1284PC_STROBE_TIME2	(0x02000000) /* 5.0 uS */
-#define NETARM_ENI_1284PC_STROBE_TIME3	(0x03000000) /* 10.0 uS */
-#define NETARM_ENI_1284PC_STROBE_MASK	(0x03000000)
-
-#define NETARM_ENI_1284PC_MAN_STROBE_EN	(0x00800000)
-#define NETARM_ENI_1284PC_FAST_MODE	(0x00400000)
-#define NETARM_ENI_1284PC_BIDIR_MODE	(0x00200000)
-
-#define NETARM_ENI_1284PC_MAN_STROBE	(0x00080000)
-#define NETARM_ENI_1284PC_AUTO_FEED	(0x00040000)
-#define NETARM_ENI_1284PC_INIT		(0x00020000)
-#define NETARM_ENI_1284PC_HSELECT	(0x00010000)
-#define NETARM_ENI_1284PC_FE_INT_EN	(0x00008000)
-#define NETARM_ENI_1284PC_EPP_MODE	(0x00004000)
-#define NETARM_ENI_1284PC_IBR_INT_EN	(0x00002000)
-#define NETARM_ENI_1284PC_IBR		(0x00001000)
-
-#define NETARM_ENI_1284PC_RXFDB_1BYTE	(0x00000400)
-#define NETARM_ENI_1284PC_RXFDB_2BYTE	(0x00000800)
-#define NETARM_ENI_1284PC_RXFDB_3BYTE	(0x00000c00)
-#define NETARM_ENI_1284PC_RXFDB_4BYTE	(0x00000000)
-
-#define NETARM_ENI_1284PC_RBCC		(0x00000200)
-#define NETARM_ENI_1284PC_RBCT		(0x00000100)
-#define NETARM_ENI_1284PC_ACK		(0x00000080)
-#define NETARM_ENI_1284PC_FIFO_E	(0x00000040)
-#define NETARM_ENI_1284PC_OBE		(0x00000020)
-#define NETARM_ENI_1284PC_ACK_INT	(0x00000010)
-#define NETARM_ENI_1284PC_BUSY		(0x00000008)
-#define NETARM_ENI_1284PC_PE		(0x00000004)
-#define NETARM_ENI_1284PC_PSELECT	(0x00000002)
-#define NETARM_ENI_1284PC_FAULT		(0x00000001)
-
-#endif /* __NETARM_ENI_MODULE_REGISTERS_H */
diff --git a/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h b/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h
deleted file mode 100644
index 8f2f369..0000000
--- a/arch/arm/include/asm/arch-arm720t/netarm_eth_module.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * include/asm-armnommu/arch-netarm/netarm_eth_module.h
- *
- * Copyright (C) 2000 NETsilicon, Inc.
- * Copyright (C) 2000 WireSpeed Communications Corporation
- *
- * This software is copyrighted by WireSpeed. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall WireSpeed
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Jackie Smith Cashion
- *             David Smith
- */
-
-#ifndef __NETARM_ETH_MODULE_REGISTERS_H
-#define __NETARM_ETH_MODULE_REGISTERS_H
-
-/* ETH unit register offsets */
-
-#define	NETARM_ETH_MODULE_BASE		(0xFF800000)
-
-#define get_eth_reg_addr(c) ((volatile unsigned int *)(NETARM_ETH_MODULE_BASE + (c)))
-
-#define NETARM_ETH_GEN_CTRL		(0x000) /* Ethernet Gen Control Reg */
-#define NETARM_ETH_GEN_STAT		(0x004) /* Ethernet Gen Status Reg */
-#define NETARM_ETH_FIFO_DAT1            (0x008) /* Fifo Data Reg 1 */
-#define NETARM_ETH_FIFO_DAT2            (0x00C) /* Fifo Data Reg 2 */
-#define NETARM_ETH_TX_STAT              (0x010) /* Transmit Status Reg */
-#define NETARM_ETH_RX_STAT              (0x014) /* Receive Status Reg */
-
-#define NETARM_ETH_MAC_CFG		(0x400) /* MAC Configuration Reg */
-#define NETARM_ETH_PCS_CFG		(0x408) /* PCS Configuration Reg */
-#define NETARM_ETH_STL_CFG		(0x410) /* STL Configuration Reg */
-#define NETARM_ETH_B2B_IPG_GAP_TMR	(0x440) /* Back-to-back IPG
-						   Gap Timer Reg */
-#define NETARM_ETH_NB2B_IPG_GAP_TMR	(0x444) /* Non Back-to-back
-						   IPG Gap Timer Reg */
-#define NETARM_ETH_MII_CMD		(0x540) /* MII (PHY) Command Reg */
-#define NETARM_ETH_MII_ADDR		(0x544) /* MII Address Reg */
-#define NETARM_ETH_MII_WRITE		(0x548) /* MII Write Data Reg */
-#define NETARM_ETH_MII_READ		(0x54C) /* MII Read Data Reg */
-#define NETARM_ETH_MII_IND		(0x550) /* MII Indicators Reg */
-#define NETARM_ETH_MIB_CRCEC		(0x580) /* (MIB) CRC Error Counter */
-#define NETARM_ETH_MIB_AEC		(0x584) /* Alignment Error Counter */
-#define NETARM_ETH_MIB_CEC		(0x588) /* Code Error Counter */
-#define NETARM_ETH_MIB_LFC		(0x58C) /* Long Frame Counter */
-#define NETARM_ETH_MIB_SFC		(0x590) /* Short Frame Counter */
-#define NETARM_ETH_MIB_LCC		(0x594) /* Late Collision Counter */
-#define NETARM_ETH_MIB_EDC		(0x598) /* Excessive Deferral
-						   Counter */
-#define NETARM_ETH_MIB_MCC		(0x59C) /* Maximum Collision Counter */
-#define NETARM_ETH_SAL_FILTER		(0x5C0) /* SAL Station Address
-						   Filter Reg */
-#define NETARM_ETH_SAL_STATION_ADDR_1	(0x5C4) /* SAL Station Address
-						   Reg */
-#define NETARM_ETH_SAL_STATION_ADDR_2	(0x5C8)
-#define NETARM_ETH_SAL_STATION_ADDR_3	(0x5CC)
-#define NETARM_ETH_SAL_HASH_TBL_1	(0x5D0) /* SAL Multicast Hash Table*/
-#define NETARM_ETH_SAL_HASH_TBL_2	(0x5D4)
-#define NETARM_ETH_SAL_HASH_TBL_3	(0x5D8)
-#define NETARM_ETH_SAL_HASH_TBL_4	(0x5DC)
-
-/* select bitfield defintions */
-
-/* Ethernet General Control Register (0xFF80_0000) */
-
-#define NETARM_ETH_GCR_ERX		(0x80000000) /* Enable Receive FIFO */
-#define NETARM_ETH_GCR_ERXDMA		(0x40000000) /* Enable Receive DMA */
-#define NETARM_ETH_GCR_ETX		(0x00800000) /* Enable Transmit FIFO */
-#define NETARM_ETH_GCR_ETXDMA		(0x00400000) /* Enable Transmit DMA */
-#define NETARM_ETH_GCR_ETXWM_50		(0x00100000) /* Transmit FIFO Water
-							Mark.  Start transmit
-							when FIFO is 50%
-							full. */
-#define NETARM_ETH_GCR_PNA		(0x00000400) /* pSOS pNA Buffer
-							Descriptor Format */
-
-/* Ethernet General Status Register (0xFF80_0004) */
-
-#define NETARM_ETH_GST_RXFDB            (0x30000000)
-#define NETARM_ETH_GST_RXREGR		(0x08000000) /* Receive Register
-							Ready */
-#define NETARM_ETH_GST_RXFIFOH		(0x04000000)
-#define NETARM_ETH_GST_RXBR		(0x02000000)
-#define NETARM_ETH_GST_RXSKIP		(0x01000000)
-
-#define NETARM_ETH_GST_TXBC             (0x00020000)
-
-
-/* Ethernet Transmit Status Register (0xFF80_0010) */
-
-#define NETARM_ETH_TXSTAT_TXOK          (0x00008000)
-
-
-/* Ethernet Receive Status Register (0xFF80_0014) */
-
-#define NETARM_ETH_RXSTAT_SIZE          (0xFFFF0000)
-#define NETARM_ETH_RXSTAT_RXOK          (0x00002000)
-
-
-/* PCS Configuration Register (0xFF80_0408) */
-
-#define NETARM_ETH_PCSC_NOCFR		(0x1) /* Disable Ciphering */
-#define NETARM_ETH_PCSC_ENJAB		(0x2) /* Enable Jabber Protection */
-#define NETARM_ETH_PCSC_CLKS_25M	(0x0) /* 25 MHz Clock Speed Select */
-#define NETARM_ETH_PCSC_CLKS_33M	(0x4) /* 33 MHz Clock Speed Select */
-
-/* STL Configuration Register (0xFF80_0410) */
-
-#define NETARM_ETH_STLC_RXEN		(0x2) /* Enable Packet Receiver */
-#define NETARM_ETH_STLC_AUTOZ		(0x4) /* Auto Zero Statistics */
-
-/* MAC Configuration Register (0xFF80_0400) */
-
-#define NETARM_ETH_MACC_HUGEN		(0x1) /* Enable Unlimited Transmit
-						 Frame Sizes */
-#define NETARM_ETH_MACC_PADEN		(0x4) /* Automatic Pad Fill Frames
-						 to 64 Bytes */
-#define NETARM_ETH_MACC_CRCEN		(0x8) /* Append CRC to Transmit
-						 Frames */
-
-/* MII (PHY) Command Register (0xFF80_0540) */
-
-#define NETARM_ETH_MIIC_RSTAT		(0x1) /* Single Scan for Read Data */
-
-/* MII Indicators Register (0xFF80_0550) */
-
-#define NETARM_ETH_MIII_BUSY		(0x1) /* MII I/F Busy with
-						 Read/Write */
-
-/* SAL Station Address Filter Register (0xFF80_05C0) */
-
-#define NETARM_ETH_SALF_PRO		(0x8) /* Enable Promiscuous Mode */
-#define NETARM_ETH_SALF_PRM		(0x4) /* Accept All Multicast
-						 Packets */
-#define NETARM_ETH_SALF_PRA		(0x2) /* Accept Mulitcast Packets
-						 using Hash Table */
-#define NETARM_ETH_SALF_BROAD		(0x1) /* Accept All Broadcast
-						 Packets */
-
-
-#endif /* __NETARM_GEN_MODULE_REGISTERS_H */
diff --git a/arch/arm/include/asm/arch-arm720t/netarm_gen_module.h b/arch/arm/include/asm/arch-arm720t/netarm_gen_module.h
deleted file mode 100644
index 13656a3..0000000
--- a/arch/arm/include/asm/arch-arm720t/netarm_gen_module.h
+++ /dev/null
@@ -1,186 +0,0 @@
-/*
- * include/asm-armnommu/arch-netarm/netarm_gen_module.h
- *
- * Copyright (C) 2005
- * Art Shipkowski, Videon Central, Inc., <art@videon-central.com>
- *
- * Copyright (C) 2000, 2001 NETsilicon, Inc.
- * Copyright (C) 2000, 2001 Red Hat, Inc.
- *
- * This software is copyrighted by Red Hat. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall Red Hat
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Joe deBlaquiere
- *
- * Modified to support NS7520 by Art Shipkowski.
- */
-
-#ifndef __NETARM_GEN_MODULE_REGISTERS_H
-#define __NETARM_GEN_MODULE_REGISTERS_H
-
-/* GEN unit register offsets */
-
-#define NETARM_GEN_MODULE_BASE		(0xFFB00000)
-
-#define get_gen_reg_addr(c) ((volatile unsigned int *)(NETARM_GEN_MODULE_BASE + (c)))
-
-#define NETARM_GEN_SYSTEM_CONTROL	(0x00)
-#define NETARM_GEN_STATUS_CONTROL	(0x04)
-#define NETARM_GEN_PLL_CONTROL		(0x08)
-#define NETARM_GEN_SOFTWARE_SERVICE	(0x0c)
-
-#define NETARM_GEN_TIMER1_CONTROL	(0x10)
-#define NETARM_GEN_TIMER1_STATUS	(0x14)
-#define NETARM_GEN_TIMER2_CONTROL	(0x18)
-#define NETARM_GEN_TIMER2_STATUS	(0x1c)
-
-#define NETARM_GEN_PORTA		(0x20)
-#ifndef CONFIG_NETARM_NS7520
-#define NETARM_GEN_PORTB		(0x24)
-#endif
-#define NETARM_GEN_PORTC		(0x28)
-
-#define NETARM_GEN_INTR_ENABLE		(0x30)
-#define NETARM_GEN_INTR_ENABLE_SET	(0x34)
-#define NETARM_GEN_INTR_ENABLE_CLR	(0x38)
-#define NETARM_GEN_INTR_STATUS_EN	(0x34)
-#define NETARM_GEN_INTR_STATUS_RAW	(0x38)
-
-#define NETARM_GEN_CACHE_CONTROL1	(0x40)
-#define NETARM_GEN_CACHE_CONTROL2	(0x44)
-
-/* select bitfield definitions */
-
-/* System Control Register ( 0xFFB0_0000 ) */
-
-#define NETARM_GEN_SYS_CFG_LENDIAN	(0x80000000)
-#define NETARM_GEN_SYS_CFG_BENDIAN	(0x00000000)
-
-#define NETARM_GEN_SYS_CFG_BUSQRTR	(0x00000000)
-#define NETARM_GEN_SYS_CFG_BUSHALF	(0x20000000)
-#define NETARM_GEN_SYS_CFG_BUSFULL	(0x40000000)
-
-#define NETARM_GEN_SYS_CFG_BCLK_DISABLE (0x10000000)
-
-#define NETARM_GEN_SYS_CFG_WDOG_EN	(0x01000000)
-#define NETARM_GEN_SYS_CFG_WDOG_IRQ	(0x00000000)
-#define NETARM_GEN_SYS_CFG_WDOG_FIQ	(0x00400000)
-#define NETARM_GEN_SYS_CFG_WDOG_RST	(0x00800000)
-#define NETARM_GEN_SYS_CFG_WDOG_24	(0x00000000)
-#define NETARM_GEN_SYS_CFG_WDOG_26	(0x00100000)
-#define NETARM_GEN_SYS_CFG_WDOG_28	(0x00200000)
-#define NETARM_GEN_SYS_CFG_WDOG_29	(0x00300000)
-
-#define NETARM_GEN_SYS_CFG_BUSMON_EN	(0x00040000)
-#define NETARM_GEN_SYS_CFG_BUSMON_128	(0x00000000)
-#define NETARM_GEN_SYS_CFG_BUSMON_64	(0x00010000)
-#define NETARM_GEN_SYS_CFG_BUSMON_32	(0x00020000)
-#define NETARM_GEN_SYS_CFG_BUSMON_16	(0x00030000)
-
-#define NETARM_GEN_SYS_CFG_USER_EN	(0x00008000)
-#define NETARM_GEN_SYS_CFG_BUSER_EN	(0x00004000)
-
-#define NETARM_GEN_SYS_CFG_BUSARB_INT	(0x00002000)
-#define NETARM_GEN_SYS_CFG_BUSARB_EXT	(0x00000000)
-
-#define NETARM_GEN_SYS_CFG_DMATST	(0x00001000)
-
-#define NETARM_GEN_SYS_CFG_TEALAST	(0x00000800)
-
-#define NETARM_GEN_SYS_CFG_ALIGN_ABORT	(0x00000400)
-
-#define NETARM_GEN_SYS_CFG_CACHE_EN	(0x00000200)
-
-#define NETARM_GEN_SYS_CFG_WRI_BUF_EN	(0x00000100)
-
-#define NETARM_GEN_SYS_CFG_CACHE_INIT	(0x00000080)
-
-/* PLL Control Register ( 0xFFB0_0008 ) */
-
-#define NETARM_GEN_PLL_CTL_PLLCNT_MASK	(0x0F000000)
-
-#define NETARM_GEN_PLL_CTL_PLLCNT(x)	(((x)<<24) & \
-					 NETARM_GEN_PLL_CTL_PLLCNT_MASK)
-
-/* Defaults for POLTST and ICP Fields in PLL CTL */
-#define NETARM_GEN_PLL_CTL_OUTDIV(x)	(x)
-#define NETARM_GEN_PLL_CTL_INDIV(x)	((x)<<6)
-#define NETARM_GEN_PLL_CTL_POLTST_DEF	(0x00000E00)
-#define NETARM_GEN_PLL_CTL_ICP_DEF	(0x0000003C)
-
-
-/* Software Service Register ( 0xFFB0_000C ) */
-
-#define NETARM_GEN_SW_SVC_RESETA	(0x123)
-#define NETARM_GEN_SW_SVC_RESETB	(0x321)
-
-/* PORT C Register ( 0xFFB0_0028 ) */
-
-#ifndef CONFIG_NETARM_NS7520
-#define NETARM_GEN_PORT_MODE(x)		(((x)<<24) + (0xFF00))
-#define NETARM_GEN_PORT_DIR(x)		(((x)<<16) + (0xFF00))
-#else
-#define NETARM_GEN_PORT_MODE(x)		((x)<<24)
-#define NETARM_GEN_PORT_DIR(x)		((x)<<16)
-#define NETARM_GEN_PORT_CSF(x)		((x)<<8)
-#endif
-
-/* Timer Registers ( 0xFFB0_0010 0xFFB0_0018 ) */
-
-#define NETARM_GEN_TCTL_ENABLE		(0x80000000)
-#define NETARM_GEN_TCTL_INT_ENABLE	(0x40000000)
-
-#define NETARM_GEN_TCTL_USE_IRQ		(0x00000000)
-#define NETARM_GEN_TCTL_USE_FIQ		(0x20000000)
-
-#define NETARM_GEN_TCTL_USE_PRESCALE	(0x10000000)
-#define NETARM_GEN_TCTL_INIT_COUNT(x)	((x) & 0x1FF)
-
-#define NETARM_GEN_TSTAT_INTPEN		(0x40000000)
-#if ~defined(CONFIG_NETARM_NS7520)
-#define NETARM_GEN_TSTAT_CTC_MASK	(0x000001FF)
-#else
-#define NETARM_GEN_TSTAT_CTC_MASK	(0x0FFFFFFF)
-#endif
-
-/* prescale to msecs conversion */
-
-#if !defined(CONFIG_NETARM_PLL_BYPASS)
-#define NETARM_GEN_TIMER_MSEC_P(x)	( ( ( 20480 ) * ( 0x1FF - ( (x) &	    \
-					    NETARM_GEN_TSTAT_CTC_MASK ) +   \
-					    1 ) ) / (NETARM_XTAL_FREQ/1000) )
-
-#define NETARM_GEN_TIMER_SET_HZ(x)	( ( ((NETARM_XTAL_FREQ/(20480*(x)))-1) & \
-					  NETARM_GEN_TSTAT_CTC_MASK ) | \
-					  NETARM_GEN_TCTL_USE_PRESCALE )
-
-#else
-#define NETARM_GEN_TIMER_MSEC_P(x)	( ( ( 4096 ) * ( 0x1FF - ( (x) &    \
-					    NETARM_GEN_TSTAT_CTC_MASK ) +   \
-					    1 ) ) / (NETARM_XTAL_FREQ/1000) )
-
-#define NETARM_GEN_TIMER_SET_HZ(x)	( ( ((NETARM_XTAL_FREQ/(4096*(x)))-1) & \
-					  NETARM_GEN_TSTAT_CTC_MASK ) | \
-					  NETARM_GEN_TCTL_USE_PRESCALE )
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/arch-arm720t/netarm_mem_module.h b/arch/arm/include/asm/arch-arm720t/netarm_mem_module.h
deleted file mode 100644
index c650c3b..0000000
--- a/arch/arm/include/asm/arch-arm720t/netarm_mem_module.h
+++ /dev/null
@@ -1,184 +0,0 @@
-/*
- * include/asm-armnommu/arch-netarm/netarm_mem_module.h
- *
- * Copyright (C) 2005
- * Art Shipkowski, Videon Central, Inc., <art@videon-central.com>
- *
- * Copyright (C) 2000, 2001 NETsilicon, Inc.
- * Copyright (C) 2000, 2001 Red Hat, Inc.
- *
- * This software is copyrighted by Red Hat. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall Red Hat
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Joe deBlaquiere
- *
- * Modified to support NS7520 by Art Shipkowski.
- */
-
-#ifndef __NETARM_MEM_MODULE_REGISTERS_H
-#define __NETARM_MEM_MODULE_REGISTERS_H
-
-/* GEN unit register offsets */
-
-#define	NETARM_MEM_MODULE_BASE		(0xFFC00000)
-
-#define	NETARM_MEM_MODULE_CONFIG	(0x00)
-#define	NETARM_MEM_CS0_BASE_ADDR	(0x10)
-#define	NETARM_MEM_CS0_OPTIONS		(0x14)
-#define	NETARM_MEM_CS1_BASE_ADDR	(0x20)
-#define	NETARM_MEM_CS1_OPTIONS		(0x24)
-#define	NETARM_MEM_CS2_BASE_ADDR	(0x30)
-#define	NETARM_MEM_CS2_OPTIONS		(0x34)
-#define	NETARM_MEM_CS3_BASE_ADDR	(0x40)
-#define	NETARM_MEM_CS3_OPTIONS		(0x44)
-#define	NETARM_MEM_CS4_BASE_ADDR	(0x50)
-#define	NETARM_MEM_CS4_OPTIONS		(0x54)
-
-/* select bitfield defintions */
-
-/* Module Configuration Register ( 0xFFC0_0000 ) */
-
-#define NETARM_MEM_CFG_REFR_COUNT_MASK	(0xFF000000)
-#define NETARM_MEM_CFG_REFRESH_EN	(0x00800000)
-
-#define NETARM_MEM_CFG_REFR_CYCLE_8CLKS	(0x00000000)
-#define NETARM_MEM_CFG_REFR_CYCLE_6CLKS	(0x00200000)
-#define NETARM_MEM_CFG_REFR_CYCLE_5CLKS	(0x00400000)
-#define NETARM_MEM_CFG_REFR_CYCLE_4CLKS	(0x00600000)
-
-#define NETARM_MEM_CFG_PORTC_AMUX	(0x00100000)
-
-#define NETARM_MEM_CFG_A27_ADDR		(0x00080000)
-#define NETARM_MEM_CFG_A27_CS0OE	(0x00000000)
-
-#define NETARM_MEM_CFG_A26_ADDR		(0x00040000)
-#define NETARM_MEM_CFG_A26_CS0WE	(0x00000000)
-
-#define NETARM_MEM_CFG_A25_ADDR		(0x00020000)
-#define NETARM_MEM_CFG_A25_BLAST	(0x00000000)
-
-#define NETARM_MEM_CFG_PORTC_AMUX2	(0x00010000)
-
-
-/* range on this period is about 1 to 275 usec (with 18.432MHz clock)   */
-/* the expression will round down, so make sure to reverse it to verify */
-/* it is what you want. period = [( count + 1 ) * 20] / Fcrystal        */
-/* (note: Fxtal = Fcrystal/5, see HWRefGuide sections 8.2.5 and 11.3.2) */
-
-#define	NETARM_MEM_REFR_PERIOD_USEC(p)	(NETARM_MEM_CFG_REFR_COUNT_MASK & \
-					 (((((NETARM_XTAL_FREQ/(1000))*p)/(20000) \
-					    ) - (1) ) << (24)))
-
-#if 0
-/* range on this period is about 1 to 275 usec (with 18.432MHz clock) */
-/* the expression will round down, so make sure to reverse it toverify */
-/* it is what you want. period = [( count + 1 ) * 4] / Fxtal          */
-
-#define	NETARM_MEM_REFR_PERIOD_USEC(p)	(NETARM_MEM_CFG_REFR_COUNT_MASK & \
-					 (((((NETARM_XTAL_FREQ/(1000))*p)/(4000) \
-					    ) - (1) ) << (24)))
-#endif
-
-/* Base Address Registers (0xFFC0_00X0) */
-
-#define NETARM_MEM_BAR_BASE_MASK	(0xFFFFF000)
-
-/* macro to define base */
-
-#define NETARM_MEM_BAR_BASE(x)		((x) & NETARM_MEM_BAR_BASE_MASK)
-
-#define NETARM_MEM_BAR_DRAM_FP		(0x00000000)
-#define NETARM_MEM_BAR_DRAM_EDO		(0x00000100)
-#define NETARM_MEM_BAR_DRAM_SYNC	(0x00000200)
-
-#define NETARM_MEM_BAR_DRAM_MUX_INT	(0x00000000)
-#define NETARM_MEM_BAR_DRAM_MUX_EXT	(0x00000080)
-
-#define NETARM_MEM_BAR_DRAM_MUX_BAL	(0x00000000)
-#define NETARM_MEM_BAR_DRAM_MUX_UNBAL	(0x00000020)
-
-#define NETARM_MEM_BAR_1BCLK_IDLE	(0x00000010)
-
-#define NETARM_MEM_BAR_DRAM_SEL		(0x00000008)
-
-#define NETARM_MEM_BAR_BURST_EN		(0x00000004)
-
-#define NETARM_MEM_BAR_WRT_PROT		(0x00000002)
-
-#define NETARM_MEM_BAR_VALID		(0x00000001)
-
-/* Option Registers (0xFFC0_00X4) */
-
-/* macro to define which bits of the base are significant */
-
-#define NETARM_MEM_OPT_BASE_USE(x)	((x) & NETARM_MEM_BAR_BASE_MASK)
-
-#define NETARM_MEM_OPT_WAIT_MASK	(0x00000F00)
-
-#define	NETARM_MEM_OPT_WAIT_STATES(x)	(((x) << 8 ) & NETARM_MEM_OPT_WAIT_MASK )
-
-#define NETARM_MEM_OPT_BCYC_1		(0x00000000)
-#define NETARM_MEM_OPT_BCYC_2		(0x00000040)
-#define NETARM_MEM_OPT_BCYC_3		(0x00000080)
-#define NETARM_MEM_OPT_BCYC_4		(0x000000C0)
-
-#define NETARM_MEM_OPT_BSIZE_2		(0x00000000)
-#define NETARM_MEM_OPT_BSIZE_4		(0x00000010)
-#define NETARM_MEM_OPT_BSIZE_8		(0x00000020)
-#define NETARM_MEM_OPT_BSIZE_16		(0x00000030)
-
-#define NETARM_MEM_OPT_32BIT		(0x00000000)
-#define NETARM_MEM_OPT_16BIT		(0x00000004)
-#define NETARM_MEM_OPT_8BIT		(0x00000008)
-#define NETARM_MEM_OPT_32BIT_EXT_ACK	(0x0000000C)
-
-#define NETARM_MEM_OPT_BUS_SIZE_MASK	(0x0000000C)
-
-#define NETARM_MEM_OPT_READ_ASYNC	(0x00000000)
-#define NETARM_MEM_OPT_READ_SYNC	(0x00000002)
-
-#define NETARM_MEM_OPT_WRITE_ASYNC	(0x00000000)
-#define NETARM_MEM_OPT_WRITE_SYNC	(0x00000001)
-
-#ifdef CONFIG_NETARM_NS7520
-/* The NS7520 has a second options register for each chip select */
-#define	NETARM_MEM_CS0_OPTIONS_B  (0x18)
-#define	NETARM_MEM_CS1_OPTIONS_B  (0x28)
-#define	NETARM_MEM_CS2_OPTIONS_B  (0x38)
-#define	NETARM_MEM_CS3_OPTIONS_B  (0x48)
-#define	NETARM_MEM_CS4_OPTIONS_B  (0x58)
-
-/* Option B Registers (0xFFC0_00x8) */
-#define NETARM_MEM_OPTB_SYNC_1_STAGE	(0x00000001)
-#define NETARM_MEM_OPTB_SYNC_2_STAGE	(0x00000002)
-#define NETARM_MEM_OPTB_BCYC_PLUS0	(0x00000000)
-#define NETARM_MEM_OPTB_BCYC_PLUS4	(0x00000004)
-#define NETARM_MEM_OPTB_BCYC_PLUS8	(0x00000008)
-#define NETARM_MEM_OPTB_BCYC_PLUS12	(0x0000000C)
-
-#define NETARM_MEM_OPTB_WAIT_PLUS0	(0x00000000)
-#define NETARM_MEM_OPTB_WAIT_PLUS16	(0x00000010)
-#define NETARM_MEM_OPTB_WAIT_PLUS32	(0x00000020)
-#define NETARM_MEM_OPTB_WAIT_PLUS48	(0x00000030)
-#endif
-
-#endif
diff --git a/arch/arm/include/asm/arch-arm720t/netarm_registers.h b/arch/arm/include/asm/arch-arm720t/netarm_registers.h
deleted file mode 100644
index fa88128..0000000
--- a/arch/arm/include/asm/arch-arm720t/netarm_registers.h
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * linux/include/asm-arm/arch-netarm/netarm_registers.h
- *
- * Copyright (C) 2005
- * Art Shipkowski, Videon Central, Inc., <art@videon-central.com>
- *
- * Copyright (C) 2000, 2001 NETsilicon, Inc.
- * Copyright (C) 2000, 2001 WireSpeed Communications Corporation
- *
- * This software is copyrighted by WireSpeed. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall WireSpeed
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Joe deBlaquiere
- *
- * Modified to support NS7520 by Art Shipkowski.
- */
-
-#ifndef __NET_ARM_REGISTERS_H
-#define __NET_ARM_REGISTERS_H
-
-#include <config.h>
-
-/* fundamental constants : */
-/* the input crystal/clock frequency ( in Hz ) */
-#define	NETARM_XTAL_FREQ_25MHz		(18432000)
-#define	NETARM_XTAL_FREQ_33MHz		(23698000)
-#define	NETARM_XTAL_FREQ_48MHz		(48000000)
-#define	NETARM_XTAL_FREQ_55MHz		(55000000)
-#define NETARM_XTAL_FREQ_EMLIN1		(20000000)
-
-/* the frequency of SYS_CLK */
-#if defined(CONFIG_NETARM_EMLIN)
-
-/* EMLIN board:  33 MHz (exp.) */
-#define	NETARM_PLL_COUNT_VAL		6
-#define NETARM_XTAL_FREQ		NETARM_XTAL_FREQ_25MHz
-
-#elif defined(CONFIG_NETARM_NET40_REV2)
-
-/* NET+40 Rev2 boards:  33 MHz (with NETARM_XTAL_FREQ_25MHz) */
-#define	NETARM_PLL_COUNT_VAL		6
-#define	NETARM_XTAL_FREQ		NETARM_XTAL_FREQ_25MHz
-
-#elif defined(CONFIG_NETARM_NET40_REV4)
-
-/* NET+40 Rev4 boards with EDO must clock slower: 25 MHz (with
-   NETARM_XTAL_FREQ_25MHz) 4 */
-#define	NETARM_PLL_COUNT_VAL		4
-#define	NETARM_XTAL_FREQ		NETARM_XTAL_FREQ_25MHz
-
-#elif defined(CONFIG_NETARM_NET50)
-
-/* NET+50 boards:  40 MHz (with NETARM_XTAL_FREQ_25MHz) */
-#define NETARM_PLL_COUNT_VAL		8
-#define	NETARM_XTAL_FREQ		NETARM_XTAL_FREQ_25MHz
-
-#else	/* CONFIG_NETARM_NS7520 */
-
-#define	NETARM_PLL_COUNT_VAL		0
-
-#if defined(CONFIG_BOARD_UNC20)
-#define	NETARM_XTAL_FREQ		NETARM_XTAL_FREQ_48MHz
-#else
-#define	NETARM_XTAL_FREQ		NETARM_XTAL_FREQ_55MHz
-#endif
-
-#endif
-
-/* #include "arm_registers.h" */
-#include <asm/arch/netarm_gen_module.h>
-#include <asm/arch/netarm_mem_module.h>
-#include <asm/arch/netarm_ser_module.h>
-#include <asm/arch/netarm_eni_module.h>
-#include <asm/arch/netarm_dma_module.h>
-#include <asm/arch/netarm_eth_module.h>
-
-#endif
diff --git a/arch/arm/include/asm/arch-arm720t/netarm_ser_module.h b/arch/arm/include/asm/arch-arm720t/netarm_ser_module.h
deleted file mode 100644
index 6fbae11..0000000
--- a/arch/arm/include/asm/arch-arm720t/netarm_ser_module.h
+++ /dev/null
@@ -1,347 +0,0 @@
-/*
- * linux/include/asm-arm/arch-netarm/netarm_ser_module.h
- *
- * Copyright (C) 2000 NETsilicon, Inc.
- * Copyright (C) 2000 Red Hat, Inc.
- *
- * This software is copyrighted by Red Hat. LICENSEE agrees that
- * it will not delete this copyright notice, trademarks or protective
- * notices from any copy made by LICENSEE.
- *
- * This software is provided "AS-IS" and any express or implied
- * warranties or conditions, including but not limited to any
- * implied warranties of merchantability and fitness for a particular
- * purpose regarding this software. In no event shall Red Hat
- * be liable for any indirect, consequential, or incidental damages,
- * loss of profits or revenue, loss of use or data, or interruption
- * of business, whether the alleged damages are labeled in contract,
- * tort, or indemnity.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * author(s) : Joe deBlaquiere
- *             Clark Williams
- */
-
-#ifndef __NETARM_SER_MODULE_REGISTERS_H
-#define __NETARM_SER_MODULE_REGISTERS_H
-
-#ifndef	__ASSEMBLER__
-
-/* (--sub)#include "types.h" */
-
-/* serial channel control structure */
-typedef struct {
-  u32	ctrl_a;
-  u32	ctrl_b;
-  u32	status_a;
-  u32	bitrate;
-  u32	fifo;
-  u32	rx_buf_timer;
-  u32	rx_char_timer;
-  u32	rx_match;
-  u32	rx_match_mask;
-  u32	ctrl_c;
-  u32	status_b;
-  u32	status_c;
-  u32	fifo_last;
-  u32	unused[3];
-} netarm_serial_channel_t;
-
-#endif
-
-/* SER unit register offsets */
-
-/* #ifdef CONFIG_ARCH_NETARM */
-#define	NETARM_SER_MODULE_BASE		(0xFFD00000)
-/* #else */
-/* extern serial_channel_t netarm_dummy_registers[]; */
-/* #define NETARM_SER_MODULE_BASE		(netarm_dummy_registers) */
-/* #ifndef NETARM_XTAL_FREQ */
-/* #define NETARM_XTAL_FREQ                18432000 */
-/* #endif */
-/* #endif */
-
-/* calculate the sysclk value from the pll setting */
-#define	NETARM_PLLED_SYSCLK_FREQ	(( NETARM_XTAL_FREQ / 5 ) * \
-					 ( NETARM_PLL_COUNT_VAL + 3 ))
-
-#define get_serial_channel(c) (&(((netarm_serial_channel_t *)NETARM_SER_MODULE_BASE)[c]))
-
-#define	NETARM_SER_CH1_CTRL_A		(0x00)
-#define	NETARM_SER_CH1_CTRL_B		(0x04)
-#define	NETARM_SER_CH1_STATUS_A		(0x08)
-#define	NETARM_SER_CH1_BITRATE		(0x0C)
-#define	NETARM_SER_CH1_FIFO		(0x10)
-#define	NETARM_SER_CH1_RX_BUF_TMR	(0x14)
-#define	NETARM_SER_CH1_RX_CHAR_TMR	(0x18)
-#define	NETARM_SER_CH1_RX_MATCH		(0x1c)
-#define	NETARM_SER_CH1_RX_MATCH_MASK	(0x20)
-#define	NETARM_SER_CH1_CTRL_C		(0x24)
-#define	NETARM_SER_CH1_STATUS_B		(0x28)
-#define	NETARM_SER_CH1_STATUS_C		(0x2c)
-#define	NETARM_SER_CH1_FIFO_LAST	(0x30)
-
-#define	NETARM_SER_CH2_CTRL_A		(0x40)
-#define	NETARM_SER_CH2_CTRL_B		(0x44)
-#define	NETARM_SER_CH2_STATUS_A		(0x48)
-#define	NETARM_SER_CH2_BITRATE		(0x4C)
-#define	NETARM_SER_CH2_FIFO		(0x50)
-#define	NETARM_SER_CH2_RX_BUF_TMR	(0x54)
-#define	NETARM_SER_CH2_RX_CHAR_TMR	(0x58)
-#define	NETARM_SER_CH2_RX_MATCH		(0x5c)
-#define	NETARM_SER_CH2_RX_MATCH_MASK	(0x60)
-#define	NETARM_SER_CH2_CTRL_C		(0x64)
-#define	NETARM_SER_CH2_STATUS_B		(0x68)
-#define	NETARM_SER_CH2_STATUS_C		(0x6c)
-#define	NETARM_SER_CH2_FIFO_LAST	(0x70)
-
-/* select bitfield defintions */
-
-/* Control Register A */
-
-#define	NETARM_SER_CTLA_ENABLE		(0x80000000)
-#define	NETARM_SER_CTLA_BRK		(0x40000000)
-
-#define	NETARM_SER_CTLA_STICKP		(0x20000000)
-
-#define	NETARM_SER_CTLA_P_EVEN		(0x18000000)
-#define	NETARM_SER_CTLA_P_ODD		(0x08000000)
-#define	NETARM_SER_CTLA_P_NONE		(0x00000000)
-
-/* if you read the errata, you will find that the STOP bits don't work right */
-#define	NETARM_SER_CTLA_2STOP		(0x00000000)
-#define	NETARM_SER_CTLA_3STOP		(0x04000000)
-
-#define	NETARM_SER_CTLA_5BITS		(0x00000000)
-#define	NETARM_SER_CTLA_6BITS		(0x01000000)
-#define	NETARM_SER_CTLA_7BITS		(0x02000000)
-#define	NETARM_SER_CTLA_8BITS		(0x03000000)
-
-#define	NETARM_SER_CTLA_CTSTX		(0x00800000)
-#define	NETARM_SER_CTLA_RTSRX		(0x00400000)
-
-#define	NETARM_SER_CTLA_LOOP_REM	(0x00200000)
-#define	NETARM_SER_CTLA_LOOP_LOC	(0x00100000)
-
-#define	NETARM_SER_CTLA_GPIO2		(0x00080000)
-#define	NETARM_SER_CTLA_GPIO1		(0x00040000)
-
-#define	NETARM_SER_CTLA_DTR_EN		(0x00020000)
-#define	NETARM_SER_CTLA_RTS_EN		(0x00010000)
-
-#define	NETARM_SER_CTLA_IE_RX_BRK	(0x00008000)
-#define	NETARM_SER_CTLA_IE_RX_FRMERR	(0x00004000)
-#define	NETARM_SER_CTLA_IE_RX_PARERR	(0x00002000)
-#define	NETARM_SER_CTLA_IE_RX_OVERRUN	(0x00001000)
-#define	NETARM_SER_CTLA_IE_RX_RDY	(0x00000800)
-#define	NETARM_SER_CTLA_IE_RX_HALF	(0x00000400)
-#define	NETARM_SER_CTLA_IE_RX_FULL	(0x00000200)
-#define	NETARM_SER_CTLA_IE_RX_DMAEN	(0x00000100)
-#define	NETARM_SER_CTLA_IE_RX_DCD	(0x00000080)
-#define	NETARM_SER_CTLA_IE_RX_RI	(0x00000040)
-#define	NETARM_SER_CTLA_IE_RX_DSR	(0x00000020)
-
-#define NETARM_SER_CTLA_IE_RX_ALL	(NETARM_SER_CTLA_IE_RX_BRK \
-					|NETARM_SER_CTLA_IE_RX_FRMERR \
-					|NETARM_SER_CTLA_IE_RX_PARERR \
-					|NETARM_SER_CTLA_IE_RX_OVERRUN \
-					|NETARM_SER_CTLA_IE_RX_RDY \
-					|NETARM_SER_CTLA_IE_RX_HALF \
-					|NETARM_SER_CTLA_IE_RX_FULL \
-					|NETARM_SER_CTLA_IE_RX_DMAEN \
-					|NETARM_SER_CTLA_IE_RX_DCD \
-					|NETARM_SER_CTLA_IE_RX_RI \
-					|NETARM_SER_CTLA_IE_RX_DSR)
-
-#define	NETARM_SER_CTLA_IE_TX_CTS	(0x00000010)
-#define	NETARM_SER_CTLA_IE_TX_EMPTY	(0x00000008)
-#define	NETARM_SER_CTLA_IE_TX_HALF	(0x00000004)
-#define	NETARM_SER_CTLA_IE_TX_FULL	(0x00000002)
-#define	NETARM_SER_CTLA_IE_TX_DMAEN	(0x00000001)
-
-#define NETARM_SER_CTLA_IE_TX_ALL	(NETARM_SER_CTLA_IE_TX_CTS \
-					|NETARM_SER_CTLA_IE_TX_EMPTY \
-					|NETARM_SER_CTLA_IE_TX_HALF \
-					|NETARM_SER_CTLA_IE_TX_FULL \
-					|NETARM_SER_CTLA_IE_TX_DMAEN)
-
-/* Control Register B */
-
-#define	NETARM_SER_CTLB_MATCH1_EN	(0x80000000)
-#define	NETARM_SER_CTLB_MATCH2_EN	(0x40000000)
-#define	NETARM_SER_CTLB_MATCH3_EN	(0x20000000)
-#define	NETARM_SER_CTLB_MATCH4_EN	(0x10000000)
-
-#define	NETARM_SER_CTLB_RBGT_EN		(0x08000000)
-#define	NETARM_SER_CTLB_RCGT_EN		(0x04000000)
-
-#define	NETARM_SER_CTLB_UART_MODE	(0x00000000)
-#define	NETARM_SER_CTLB_HDLC_MODE	(0x00100000)
-#define	NETARM_SER_CTLB_SPI_MAS_MODE	(0x00200000)
-#define	NETARM_SER_CTLB_SPI_SLV_MODE	(0x00300000)
-
-#define	NETARM_SER_CTLB_REV_BIT_ORDER	(0x00080000)
-
-#define	NETARM_SER_CTLB_MAM1		(0x00040000)
-#define	NETARM_SER_CTLB_MAM2		(0x00020000)
-
-/* Status Register A */
-
-#define	NETARM_SER_STATA_MATCH1		(0x80000000)
-#define	NETARM_SER_STATA_MATCH2		(0x40000000)
-#define	NETARM_SER_STATA_MATCH3		(0x20000000)
-#define	NETARM_SER_STATA_MATCH4		(0x10000000)
-
-#define	NETARM_SER_STATA_BGAP		(0x80000000)
-#define	NETARM_SER_STATA_CGAP		(0x40000000)
-
-#define	NETARM_SER_STATA_RX_1B		(0x00100000)
-#define	NETARM_SER_STATA_RX_2B		(0x00200000)
-#define	NETARM_SER_STATA_RX_3B		(0x00300000)
-#define	NETARM_SER_STATA_RX_4B		(0x00000000)
-
-/* downshifted values */
-
-#define	NETARM_SER_STATA_RXFDB_1BYTES	(0x001)
-#define	NETARM_SER_STATA_RXFDB_2BYTES	(0x002)
-#define	NETARM_SER_STATA_RXFDB_3BYTES	(0x003)
-#define	NETARM_SER_STATA_RXFDB_4BYTES	(0x000)
-
-#define	NETARM_SER_STATA_RXFDB_MASK	(0x00300000)
-#define	NETARM_SER_STATA_RXFDB(x)	(((x) & NETARM_SER_STATA_RXFDB_MASK) \
-					 >> 20)
-
-#define	NETARM_SER_STATA_DCD		(0x00080000)
-#define	NETARM_SER_STATA_RI		(0x00040000)
-#define	NETARM_SER_STATA_DSR		(0x00020000)
-#define	NETARM_SER_STATA_CTS		(0x00010000)
-
-#define	NETARM_SER_STATA_RX_BRK		(0x00008000)
-#define	NETARM_SER_STATA_RX_FRMERR	(0x00004000)
-#define	NETARM_SER_STATA_RX_PARERR	(0x00002000)
-#define	NETARM_SER_STATA_RX_OVERRUN	(0x00001000)
-#define	NETARM_SER_STATA_RX_RDY		(0x00000800)
-#define	NETARM_SER_STATA_RX_HALF	(0x00000400)
-#define	NETARM_SER_STATA_RX_CLOSED	(0x00000200)
-#define	NETARM_SER_STATA_RX_FULL	(0x00000100)
-#define	NETARM_SER_STATA_RX_DCD		(0x00000080)
-#define	NETARM_SER_STATA_RX_RI		(0x00000040)
-#define	NETARM_SER_STATA_RX_DSR		(0x00000020)
-
-#define	NETARM_SER_STATA_TX_CTS		(0x00000010)
-#define	NETARM_SER_STATA_TX_RDY		(0x00000008)
-#define	NETARM_SER_STATA_TX_HALF	(0x00000004)
-#define	NETARM_SER_STATA_TX_FULL	(0x00000002)
-#define	NETARM_SER_STATA_TX_DMAEN	(0x00000001)
-
-/* you have to clear all receive signals to get the fifo to move forward */
-#define NETARM_SER_STATA_CLR_ALL	(NETARM_SER_STATA_RX_BRK | \
-					 NETARM_SER_STATA_RX_FRMERR | \
-					 NETARM_SER_STATA_RX_PARERR | \
-					 NETARM_SER_STATA_RX_OVERRUN | \
-					 NETARM_SER_STATA_RX_HALF | \
-					 NETARM_SER_STATA_RX_CLOSED | \
-					 NETARM_SER_STATA_RX_FULL | \
-					 NETARM_SER_STATA_RX_DCD | \
-					 NETARM_SER_STATA_RX_RI | \
-					 NETARM_SER_STATA_RX_DSR | \
-					 NETARM_SER_STATA_TX_CTS )
-
-/* Bit Rate Registers */
-
-#define	NETARM_SER_BR_EN		(0x80000000)
-#define	NETARM_SER_BR_TMODE		(0x40000000)
-
-#define	NETARM_SER_BR_RX_CLK_INT	(0x00000000)
-#define	NETARM_SER_BR_RX_CLK_EXT	(0x20000000)
-#define	NETARM_SER_BR_TX_CLK_INT	(0x00000000)
-#define	NETARM_SER_BR_TX_CLK_EXT	(0x10000000)
-
-#define	NETARM_SER_BR_RX_CLK_DRV	(0x08000000)
-#define	NETARM_SER_BR_TX_CLK_DRV	(0x04000000)
-
-#define	NETARM_SER_BR_CLK_EXT_5		(0x00000000)
-#define	NETARM_SER_BR_CLK_SYSTEM	(0x01000000)
-#define	NETARM_SER_BR_CLK_OUT1A		(0x02000000)
-#define	NETARM_SER_BR_CLK_OUT2A		(0x03000000)
-
-#define	NETARM_SER_BR_TX_CLK_INV	(0x00800000)
-#define	NETARM_SER_BR_RX_CLK_INV	(0x00400000)
-
-/* complete settings assuming system clock input is 18MHz */
-
-#define	NETARM_SER_BR_MASK		(0x000007FF)
-
-/* bit rate determined from equation Fbr = Fxtal / [ 10 * ( N + 1 ) ] */
-/* from section 7.5.4 of HW Ref Guide */
-
-/* #ifdef CONFIG_NETARM_PLL_BYPASS */
-#define	NETARM_SER_BR_X16(x)	( NETARM_SER_BR_EN |			\
-				  NETARM_SER_BR_RX_CLK_INT |		\
-				  NETARM_SER_BR_TX_CLK_INT |		\
-				  NETARM_SER_BR_CLK_EXT_5 |		\
-				  ( ( ( ( NETARM_XTAL_FREQ /		\
-				          ( x * 10 ) ) - 1 ) /	16 ) &	\
-				    NETARM_SER_BR_MASK ) )
-/*
-#else
-#define	NETARM_SER_BR_X16(x)	( NETARM_SER_BR_EN |			\
-				  NETARM_SER_BR_RX_CLK_INT |		\
-				  NETARM_SER_BR_TX_CLK_INT |		\
-				  NETARM_SER_BR_CLK_SYSTEM |		\
-				  ( ( ( ( NETARM_PLLED_SYSCLK_FREQ /		\
-				          ( x * 2 ) ) - 1 ) /	16 ) &	\
-				    NETARM_SER_BR_MASK ) )
-#endif
-*/
-
-/* Receive Buffer Gap Timer */
-
-#define	NETARM_SER_RX_GAP_TIMER_EN	(0x80000000)
-#define	NETARM_SER_RX_GAP_MASK		(0x00003FFF)
-
-/* rx gap is a function of bit rate x */
-
-/* #ifdef CONFIG_NETARM_PLL_BYPASS */
-#define	NETARM_SER_RXGAP(x)	( NETARM_SER_RX_GAP_TIMER_EN |		\
-				  ( ( ( ( 10 * NETARM_XTAL_FREQ ) /	\
-				        ( x * 5 * 512 ) ) - 1 ) &	\
-			              NETARM_SER_RX_GAP_MASK ) )
-/*
-#else
-#define	NETARM_SER_RXGAP(x)	( NETARM_SER_RX_GAP_TIMER_EN |			\
-				  ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) /	\
-				        ( x * 512 ) ) - 1 ) &			\
-			              NETARM_SER_RX_GAP_MASK ) )
-#endif
-*/
-
-#if 0
-#define	NETARM_SER_RXGAP(x)	( NETARM_SER_RX_GAP_TIMER_EN |		\
-				  ( ( ( ( 2 * NETARM_PLLED_SYSCLK_FREQ ) /	\
-				        ( x * 5 * 512 ) ) - 1 ) &	\
-			              NETARM_SER_RX_GAP_MASK ) )
-#define	NETARM_SER_RXGAP(x)	( NETARM_SER_RX_GAP_TIMER_EN |		\
-				  ( ( ( ( 10 * NETARM_XTAL_FREQ ) /	\
-				        ( x * 512 ) ) - 1 ) &	\
-			              NETARM_SER_RX_GAP_MASK ) )
-#endif
-
-#define MIN_BAUD_RATE        600
-#define MAX_BAUD_RATE     115200
-
-/* the default BAUD rate for the BOOTLOADER, there is a separate */
-/* setting in the serial driver <arch/armnommu/drivers/char/serial-netarm.h> */
-#define DEFAULT_BAUD_RATE 9600
-#define NETARM_SER_FIFO_SIZE 32
-#define MIN_GAP 0
-
-#endif
diff --git a/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h b/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h
deleted file mode 100644
index 5715f3e..0000000
--- a/arch/arm/include/asm/arch-lpc2292/lpc2292_registers.h
+++ /dev/null
@@ -1,225 +0,0 @@
-#ifndef __LPC2292_REGISTERS_H
-#define __LPC2292_REGISTERS_H
-
-#include <config.h>
-
-/* Macros for reading/writing registers */
-#define PUT8(reg, value) (*(volatile unsigned char*)(reg) = (value))
-#define PUT16(reg, value) (*(volatile unsigned short*)(reg) = (value))
-#define PUT32(reg, value) (*(volatile unsigned int*)(reg) = (value))
-#define GET8(reg) (*(volatile unsigned char*)(reg))
-#define GET16(reg) (*(volatile unsigned short*)(reg))
-#define GET32(reg) (*(volatile unsigned int*)(reg))
-
-/* External Memory Controller */
-
-#define BCFG0 0xFFE00000	/* 32-bits */
-#define BCFG1 0xFFE00004	/* 32-bits */
-#define BCFG2 0xFFE00008	/* 32-bits */
-#define BCFG3 0xFFE0000c	/* 32-bits */
-
-/* System Control Block */
-
-#define EXTINT   0xE01FC140
-#define EXTWAKE  0xE01FC144
-#define EXTMODE  0xE01FC148
-#define EXTPOLAR 0xE01FC14C
-#define MEMMAP   0xE01FC040
-#define PLLCON   0xE01FC080
-#define PLLCFG   0xE01FC084
-#define PLLSTAT  0xE01FC088
-#define PLLFEED  0xE01FC08C
-#define PCON     0xE01FC0C0
-#define PCONP    0xE01FC0C4
-#define VPBDIV   0xE01FC100
-
-/* Memory Acceleration Module */
-
-#define MAMCR  0xE01FC000
-#define MAMTIM 0xE01FC004
-
-/* Vectored Interrupt Controller */
-
-#define VICIRQStatus    0xFFFFF000
-#define VICFIQStatus    0xFFFFF004
-#define VICRawIntr      0xFFFFF008
-#define VICIntSelect    0xFFFFF00C
-#define VICIntEnable    0xFFFFF010
-#define VICIntEnClr     0xFFFFF014
-#define VICSoftInt      0xFFFFF018
-#define VICSoftIntClear 0xFFFFF01C
-#define VICProtection   0xFFFFF020
-#define VICVectAddr     0xFFFFF030
-#define VICDefVectAddr  0xFFFFF034
-#define VICVectAddr0    0xFFFFF100
-#define VICVectAddr1    0xFFFFF104
-#define VICVectAddr2    0xFFFFF108
-#define VICVectAddr3    0xFFFFF10C
-#define VICVectAddr4    0xFFFFF110
-#define VICVectAddr5    0xFFFFF114
-#define VICVectAddr6    0xFFFFF118
-#define VICVectAddr7    0xFFFFF11C
-#define VICVectAddr8    0xFFFFF120
-#define VICVectAddr9    0xFFFFF124
-#define VICVectAddr10   0xFFFFF128
-#define VICVectAddr11   0xFFFFF12C
-#define VICVectAddr12   0xFFFFF130
-#define VICVectAddr13   0xFFFFF134
-#define VICVectAddr14   0xFFFFF138
-#define VICVectAddr15   0xFFFFF13C
-#define VICVectCntl0    0xFFFFF200
-#define VICVectCntl1	0xFFFFF204
-#define VICVectCntl2	0xFFFFF208
-#define VICVectCntl3	0xFFFFF20C
-#define VICVectCntl4	0xFFFFF210
-#define VICVectCntl5	0xFFFFF214
-#define VICVectCntl6	0xFFFFF218
-#define VICVectCntl7	0xFFFFF21C
-#define VICVectCntl8	0xFFFFF220
-#define VICVectCntl9	0xFFFFF224
-#define VICVectCntl10	0xFFFFF228
-#define VICVectCntl11	0xFFFFF22C
-#define VICVectCntl12	0xFFFFF230
-#define VICVectCntl13	0xFFFFF234
-#define VICVectCntl14	0xFFFFF238
-#define VICVectCntl15	0xFFFFF23C
-
-/* Pin connect block */
-
-#define PINSEL0 0xE002C000	/* 32 bits */
-#define PINSEL1 0xE002C004	/* 32 bits */
-#define PINSEL2 0xE002C014	/* 32 bits */
-
-/* GPIO */
-
-#define IO0PIN 0xE0028000
-#define IO0SET 0xE0028004
-#define IO0DIR 0xE0028008
-#define IO0CLR 0xE002800C
-#define IO1PIN 0xE0028010
-#define IO1SET 0xE0028014
-#define IO1DIR 0xE0028018
-#define IO1CLR 0xE002801C
-#define IO2PIN 0xE0028020
-#define IO2SET 0xE0028024
-#define IO2DIR 0xE0028028
-#define IO2CLR 0xE002802C
-#define IO3PIN 0xE0028030
-#define IO3SET 0xE0028034
-#define IO3DIR 0xE0028038
-#define IO3CLR 0xE002803C
-
-/* Uarts */
-
-#define U0RBR 0xE000C000
-#define U0THR 0xE000C000
-#define U0IER 0xE000C004
-#define U0IIR 0xE000C008
-#define U0FCR 0xE000C008
-#define U0LCR 0xE000C00C
-#define U0LSR 0xE000C014
-#define U0SCR 0xE000C01C
-#define U0DLL 0xE000C000
-#define U0DLM 0xE000C004
-
-#define U1RBR 0xE0010000
-#define U1THR 0xE0010000
-#define U1IER 0xE0010004
-#define U1IIR 0xE0010008
-#define U1FCR 0xE0010008
-#define U1LCR 0xE001000C
-#define U1MCR 0xE0010010
-#define U1LSR 0xE0010014
-#define U1MSR 0xE0010018
-#define U1SCR 0xE001001C
-#define U1DLL 0xE0010000
-#define U1DLM 0xE0010004
-
-/* I2C */
-
-#define I2CONSET 0xE001C000
-#define I2STAT   0xE001C004
-#define I2DAT    0xE001C008
-#define I2ADR    0xE001C00C
-#define I2SCLH   0xE001C010
-#define I2SCLL   0xE001C014
-#define I2CONCLR 0xE001C018
-
-/* SPI */
-
-#define S0SPCR  0xE0020000
-#define S0SPSR  0xE0020004
-#define S0SPDR  0xE0020008
-#define S0SPCCR 0xE002000C
-#define S0SPINT 0xE002001C
-
-#define S1SPCR  0xE0030000
-#define S1SPSR  0xE0030004
-#define S1SPDR  0xE0030008
-#define S1SPCCR 0xE003000C
-#define S1SPINT 0xE003001C
-
-/* CAN controller */
-
-/* skip for now */
-
-/* Timers */
-
-#define T0IR  0xE0004000
-#define T0TCR 0xE0004004
-#define T0TC  0xE0004008
-#define T0PR  0xE000400C
-#define T0PC  0xE0004010
-#define T0MCR 0xE0004014
-#define T0MR0 0xE0004018
-#define T0MR1 0xE000401C
-#define T0MR2 0xE0004020
-#define T0MR3 0xE0004024
-#define T0CCR 0xE0004028
-#define T0CR0 0xE000402C
-#define T0CR1 0xE0004030
-#define T0CR2 0xE0004034
-#define T0CR3 0xE0004038
-#define T0EMR 0xE000403C
-
-#define T1IR  0xE0008000
-#define T1TCR 0xE0008004
-#define T1TC  0xE0008008
-#define T1PR  0xE000800C
-#define T1PC  0xE0008010
-#define T1MCR 0xE0008014
-#define T1MR0 0xE0008018
-#define T1MR1 0xE000801C
-#define T1MR2 0xE0008020
-#define T1MR3 0xE0008024
-#define T1CCR 0xE0008028
-#define T1CR0 0xE000802C
-#define T1CR1 0xE0008030
-#define T1CR2 0xE0008034
-#define T1CR3 0xE0008038
-#define T1EMR 0xE000803C
-
-/* PWM */
-
-/* skip for now */
-
-/* A/D converter */
-
-/* skip for now */
-
-/* Real Time Clock */
-
-/* skip for now */
-
-/* Watchdog */
-
-#define WDMOD  0xE0000000
-#define WDTC   0xE0000004
-#define WDFEED 0xE0000008
-#define WDTV   0xE000000C
-
-/* EmbeddedICE LOGIC */
-
-/* skip for now */
-
-#endif
diff --git a/arch/arm/include/asm/arch-lpc2292/spi.h b/arch/arm/include/asm/arch-lpc2292/spi.h
deleted file mode 100644
index 6ae66e8..0000000
--- a/arch/arm/include/asm/arch-lpc2292/spi.h
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
-    This file defines the interface to the lpc22xx SPI module.
-    Copyright (C) 2006  Embedded Artists AB (www.embeddedartists.com)
-
-    This file may be included in software not adhering to the GPL.
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program; if not, write to the Free Software
-    Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
-*/
-
-#ifndef SPI_H
-#define SPI_H
-
-#include <config.h>
-#include <common.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-
-#define SPIF 0x80
-
-#define spi_lock() disable_interrupts();
-#define spi_unlock() enable_interrupts();
-
-extern unsigned long spi_flags;
-extern unsigned char spi_idle;
-
-int spi_init(void);
-
-static inline unsigned char spi_read(void)
-{
-	unsigned char b;
-
-	PUT8(S0SPDR, spi_idle);
-	while (!(GET8(S0SPSR) & SPIF));
-	b = GET8(S0SPDR);
-
-	return b;
-}
-
-static inline void spi_write(unsigned char b)
-{
-	PUT8(S0SPDR, b);
-	while (!(GET8(S0SPSR) & SPIF));
-	GET8(S0SPDR);		/* this will clear the SPIF bit */
-}
-
-static inline void spi_set_clock(unsigned char clk_value)
-{
-	PUT8(S0SPCCR, clk_value);
-}
-
-static inline void spi_set_cfg(unsigned char phase,
-			       unsigned char polarity,
-			       unsigned char lsbf)
-{
-	unsigned char v = 0x20;	/* master bit set */
-
-	if (phase)
-		v |= 0x08;			/* set phase bit */
-	if (polarity) {
-		v |= 0x10;			/* set polarity bit */
-		spi_idle = 0xFF;
-	} else {
-		spi_idle = 0x00;
-	}
-	if (lsbf)
-		v |= 0x40;			/* set lsbf bit */
-
-	PUT8(S0SPCR, v);
-}
-#endif /* SPI_H */
diff --git a/arch/arm/include/asm/arch-omap3/dss.h b/arch/arm/include/asm/arch-omap3/dss.h
index 54add4b..ffaffbb 100644
--- a/arch/arm/include/asm/arch-omap3/dss.h
+++ b/arch/arm/include/asm/arch-omap3/dss.h
@@ -190,6 +190,7 @@
 
 #define PANEL_TIMING_H(bp, fp, sw) (DSS_HBP(bp) | DSS_HFP(fp) | DSS_HSW(sw))
 #define PANEL_TIMING_V(bp, fp, sw) (DSS_VBP(bp) | DSS_VFP(fp) | DSS_VSW(sw))
+#define PANEL_LCD_SIZE(xres, yres) ((yres - 1) << 16 | (xres - 1))
 
 /* Generic DSS Functions */
 void omap3_dss_venc_config(const struct venc_regs *venc_cfg,
diff --git a/arch/arm/include/asm/arch-s3c4510b/hardware.h b/arch/arm/include/asm/arch-s3c4510b/hardware.h
deleted file mode 100644
index 6b8c8ed..0000000
--- a/arch/arm/include/asm/arch-s3c4510b/hardware.h
+++ /dev/null
@@ -1,272 +0,0 @@
-#ifndef __HW_S3C4510_H
-#define __HW_S3C4510_H
-
-/*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description:   Samsung S3C4510B register layout
- */
-
-/*------------------------------------------------------------------------
- *	  ASIC Address Definition
- *----------------------------------------------------------------------*/
-
-/* L1 8KB on chip SRAM base address */
-#define SRAM_BASE       (0x03fe0000)
-
-/* Special Register Start Address After System Reset */
-#define REG_BASE	(0x03ff0000)
-#define SPSTR		(REG_BASE)
-
-/* *********************** */
-/* System Manager Register */
-/* *********************** */
-#define REG_SYSCFG	(REG_BASE+0x0000)
-
-#define REG_CLKCON      (REG_BASE+0x3000)
-#define REG_EXTACON0	(REG_BASE+0x3008)
-#define REG_EXTACON1	(REG_BASE+0x300c)
-#define REG_EXTDBWTH	(REG_BASE+0x3010)
-#define REG_ROMCON0	(REG_BASE+0x3014)
-#define REG_ROMCON1	(REG_BASE+0x3018)
-#define REG_ROMCON2	(REG_BASE+0x301c)
-#define REG_ROMCON3	(REG_BASE+0x3020)
-#define REG_ROMCON4	(REG_BASE+0x3024)
-#define REG_ROMCON5	(REG_BASE+0x3028)
-#define REG_DRAMCON0	(REG_BASE+0x302c)
-#define REG_DRAMCON1	(REG_BASE+0x3030)
-#define REG_DRAMCON2	(REG_BASE+0x3034)
-#define REG_DRAMCON3	(REG_BASE+0x3038)
-#define REG_REFEXTCON	(REG_BASE+0x303c)
-
-/* *********************** */
-/* Ethernet BDMA Register  */
-/* *********************** */
-#define REG_BDMATXCON	(REG_BASE+0x9000)
-#define REG_BDMARXCON	(REG_BASE+0x9004)
-#define REG_BDMATXPTR	(REG_BASE+0x9008)
-#define REG_BDMARXPTR	(REG_BASE+0x900c)
-#define REG_BDMARXLSZ	(REG_BASE+0x9010)
-#define REG_BDMASTAT	(REG_BASE+0x9014)
-
-/* Content Address Memory */
-#define REG_CAM_BASE	(REG_BASE+0x9100)
-
-#define REG_BDMATXBUF	(REG_BASE+0x9200)
-#define REG_BDMARXBUF	(REG_BASE+0x9800)
-
-/* *********************** */
-/* Ethernet MAC Register   */
-/* *********************** */
-#define REG_MACCON	(REG_BASE+0xa000)
-#define REG_CAMCON	(REG_BASE+0xa004)
-#define REG_MACTXCON	(REG_BASE+0xa008)
-#define REG_MACTXSTAT	(REG_BASE+0xa00c)
-#define REG_MACRXCON	(REG_BASE+0xa010)
-#define REG_MACRXSTAT	(REG_BASE+0xa014)
-#define REG_STADATA	(REG_BASE+0xa018)
-#define REG_STACON	(REG_BASE+0xa01c)
-#define REG_CAMEN	(REG_BASE+0xa028)
-#define REG_EMISSCNT	(REG_BASE+0xa03c)
-#define REG_EPZCNT	(REG_BASE+0xa040)
-#define REG_ERMPZCNT	(REG_BASE+0xa044)
-#define REG_ETXSTAT	(REG_BASE+0x9040)
-#define REG_MACRXDESTR	(REG_BASE+0xa064)
-#define REG_MACRXSTATEM	(REG_BASE+0xa090)
-#define REG_MACRXFIFO	(REG_BASE+0xa200)
-
-/********************/
-/* I2C Bus Register */
-/********************/
-#define REG_I2C_CON	(REG_BASE+0xf000)
-#define REG_I2C_BUF	(REG_BASE+0xf004)
-#define REG_I2C_PS	(REG_BASE+0xf008)
-#define REG_I2C_COUNT	(REG_BASE+0xf00c)
-
-/********************/
-/*    GDMA 0        */
-/********************/
-#define REG_GDMACON0	(REG_BASE+0xb000)
-#define REG_GDMA0_RUN_ENABLE (REG_BASE+0xb020)
-#define REG_GDMASRC0	(REG_BASE+0xb004)
-#define REG_GDMADST0	(REG_BASE+0xb008)
-#define REG_GDMACNT0	(REG_BASE+0xb00c)
-
-/********************/
-/*    GDMA 1        */
-/********************/
-#define REG_GDMACON1	(REG_BASE+0xc000)
-#define REG_GDMA1_RUN_ENABLE (REG_BASE+0xc020)
-#define REG_GDMASRC1	(REG_BASE+0xc004)
-#define REG_GDMADST1	(REG_BASE+0xc008)
-#define REG_GDMACNT1	(REG_BASE+0xc00c)
-
-/********************/
-/*      UART 0      */
-/********************/
-#define UART0_BASE       (REG_BASE+0xd000)
-#define REG_UART0_LCON   (REG_BASE+0xd000)
-#define REG_UART0_CTRL   (REG_BASE+0xd004)
-#define REG_UART0_STAT   (REG_BASE+0xd008)
-#define REG_UART0_TXB    (REG_BASE+0xd00c)
-#define REG_UART0_RXB    (REG_BASE+0xd010)
-#define REG_UART0_BAUD_DIV    (REG_BASE+0xd014)
-#define REG_UART0_BAUD_CNT    (REG_BASE+0xd018)
-#define REG_UART0_BAUD_CLK    (REG_BASE+0xd01C)
-
-/********************/
-/*     UART 1       */
-/********************/
-#define UART1_BASE       (REG_BASE+0xe000)
-#define REG_UART1_LCON   (REG_BASE+0xe000)
-#define REG_UART1_CTRL   (REG_BASE+0xe004)
-#define REG_UART1_STAT   (REG_BASE+0xe008)
-#define REG_UART1_TXB    (REG_BASE+0xe00c)
-#define REG_UART1_RXB    (REG_BASE+0xe010)
-#define REG_UART1_BAUD_DIV    (REG_BASE+0xe014)
-#define REG_UART1_BAUD_CNT    (REG_BASE+0xe018)
-#define REG_UART1_BAUD_CLK    (REG_BASE+0xe01C)
-
-/********************/
-/*  Timer Register  */
-/********************/
-#define REG_TMOD	(REG_BASE+0x6000)
-#define REG_TDATA0	(REG_BASE+0x6004)
-#define REG_TDATA1	(REG_BASE+0x6008)
-#define REG_TCNT0	(REG_BASE+0x600c)
-#define REG_TCNT1	(REG_BASE+0x6010)
-
-/**********************/
-/* I/O Port Interface */
-/**********************/
-#define REG_IOPMODE	(REG_BASE+0x5000)
-#define REG_IOPCON	(REG_BASE+0x5004)
-#define REG_IOPDATA	(REG_BASE+0x5008)
-
-/*********************************/
-/* Interrupt Controller Register */
-/*********************************/
-#define REG_INTMODE     (REG_BASE+0x4000)
-#define REG_INTPEND     (REG_BASE+0x4004)
-#define REG_INTMASK     (REG_BASE+0x4008)
-
-#define REG_INTPRI0     (REG_BASE+0x400c)
-#define REG_INTPRI1	(REG_BASE+0x4010)
-#define REG_INTPRI2	(REG_BASE+0x4014)
-#define REG_INTPRI3	(REG_BASE+0x4018)
-#define REG_INTPRI4	(REG_BASE+0x401c)
-#define REG_INTPRI5	(REG_BASE+0x4020)
-#define REG_INTOFFSET	(REG_BASE+0x4024)
-#define REG_INTPNDPRI	(REG_BASE+0x4028)
-#define REG_INTPNDTST	(REG_BASE+0x402C)
-
-/*********************************/
-/* CACHE CONTROL MASKS           */
-/*********************************/
-#define CACHE_STALL      (0x00000001)
-#define CACHE_ENABLE     (0x00000002)
-#define CACHE_WRITE_BUFF (0x00000004)
-#define CACHE_MODE       (0x00000030)
-#define CACHE_MODE_00    (0x00000000)
-#define CACHE_MODE_01    (0x00000010)
-#define CACHE_MODE_10    (0x00000020)
-
-/*********************************/
-/* CACHE RAM BASE ADDRESSES      */
-/*********************************/
-#define CACHE_SET0_RAM   (0x10000000)
-#define CACHE_SET1_RAM   (0x10800000)
-#define CACHE_TAG_RAM    (0x11000000)
-
-/*********************************/
-/* CACHE_DISABLE MASK            */
-/*********************************/
-#define CACHE_DISABLE_MASK (0x04000000)
-
-#define GET_REG(reg)       (*((volatile u32 *)(reg)))
-#define PUT_REG(reg, val)  (*((volatile u32 *)(reg)) = ((u32)(val)))
-#define SET_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) |  mask))
-#define CLR_REG(reg, mask) (PUT_REG((reg), GET_REG((reg)) & ~mask))
-#define PUT_U16(reg, val)  (*((volatile u16 *)(reg)) = ((u16)(val)))
-#define PUT__U8(reg, val)  (*((volatile u8  *)(reg)) = (( u8)((val)&0xFF)))
-#define GET__U8(reg)       (*((volatile u8  *)(reg)))
-
-#define PUT_LED(val)       (PUT_REG(REG_IOPDATA, (~val)&0xFF))
-#define GET_LED()          ((~GET_REG( REG_IOPDATA)) & 0xFF)
-#define SET_LED(val)       { u32 led = GET_LED(); led |= 1 << (val);  PUT_LED( led); }
-#define CLR_LED(val)       { u32 led = GET_LED(); led &= ~(1 << (val));  PUT_LED( led); }
-
-/***********************************/
-/* CLOCK CONSTANTS -- 50 MHz Clock */
-/***********************************/
-
-#define CLK_FREQ_MHZ       (50)
-#define t_data_us(t)       ((t)*CLK_FREQ_MHZ-1)   /* t is time tick,unit[us] */
-#define t_data_ms(t)       (t_data_us((t)*1000))  /* t is time tick,unit[ms] */
-
-/*********************************************************/
-/*	       TIMER MODE REGISTER                       */
-/*********************************************************/
-#define  TM0_RUN      0x01  /* Timer 0 enable */
-#define  TM0_TOGGLE   0x02  /* 0, interval mode */
-#define  TM0_OUT_1    0x04  /* Timer 0 Initial TOUT0 value */
-#define  TM1_RUN      0x08  /* Timer 1 enable */
-#define  TM1_TOGGLE   0x10  /* 0, interval mode */
-#define  TM1_OUT_1    0x20  /* Timer 0 Initial TOUT0 value */
-
-
-/*********************************/
-/* INTERRUPT SOURCES             */
-/*********************************/
-#define INT_EXTINT0	0
-#define INT_EXTINT1	1
-#define INT_EXTINT2	2
-#define INT_EXTINT3	3
-#define INT_UARTTX0	4
-#define INT_UARTRX0	5
-#define INT_UARTTX1	6
-#define INT_UARTRX1	7
-#define INT_GDMA0	8
-#define INT_GDMA1	9
-#define INT_TIMER0	10
-#define INT_TIMER1	11
-#define INT_HDLCTXA	12
-#define INT_HDLCRXA	13
-#define INT_HDLCTXB	14
-#define INT_HDLCRXB	15
-#define INT_BDMATX	16
-#define INT_BDMARX	17
-#define INT_MACTX	18
-#define INT_MACRX	19
-#define INT_IIC		20
-#define INT_GLOBAL	21
-#define N_IRQS         (21)
-
-#ifndef __ASSEMBLER__
-struct _irq_handler {
-	void                *m_data;
-	void (*m_func)( void *data);
-};
-
-#endif
-
-#endif /* __S3C4510_h */
diff --git a/arch/arm/include/asm/arch-lpc2292/hardware.h b/arch/arm/include/asm/arch-tegra20/spl.h
similarity index 65%
copy from arch/arm/include/asm/arch-lpc2292/hardware.h
copy to arch/arm/include/asm/arch-tegra20/spl.h
index 5e227e3..5e453c5 100644
--- a/arch/arm/include/asm/arch-lpc2292/hardware.h
+++ b/arch/arm/include/asm/arch-tegra20/spl.h
@@ -1,9 +1,6 @@
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
 /*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
+ * (C) Copyright 2012
+ * NVIDIA Corporation <www.nvidia.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -15,7 +12,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -23,11 +20,9 @@
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */
+#ifndef	_ASM_ARCH_SPL_H_
+#define	_ASM_ARCH_SPL_H_
 
-#if defined(CONFIG_LPC2292)
-#include <asm/arch-lpc2292/lpc2292_registers.h>
-#else
-#error No hardware file defined for this configuration
+#define BOOT_DEVICE_RAM         1
+
 #endif
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/include/asm/global_data.h b/arch/arm/include/asm/global_data.h
index f8088fe..2b9af93 100644
--- a/arch/arm/include/asm/global_data.h
+++ b/arch/arm/include/asm/global_data.h
@@ -34,7 +34,7 @@
 typedef	struct	global_data {
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	have_console;	/* serial_init() was called */
 #ifdef CONFIG_PRE_CONSOLE_BUFFER
 	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h
index 89df4dc..78a7fac 100644
--- a/arch/arm/include/asm/setup.h
+++ b/arch/arm/include/asm/setup.h
@@ -267,3 +267,8 @@
 extern struct meminfo meminfo;
 
 #endif
+
+/*
+ * Board specified tags
+ */
+void setup_board_tags(struct tag **in_params);
diff --git a/arch/arm/include/asm/u-boot.h b/arch/arm/include/asm/u-boot.h
index eac3800..2ba98bc 100644
--- a/arch/arm/include/asm/u-boot.h
+++ b/arch/arm/include/asm/u-boot.h
@@ -37,7 +37,7 @@
 #define _U_BOOT_H_	1
 
 typedef struct bd_info {
-    int			bi_baudrate;	/* serial console baudrate */
+	unsigned int	bi_baudrate;	/* serial console baudrate */
     ulong	        bi_arch_number;	/* unique id for this board */
     ulong	        bi_boot_params;	/* where this board expects params */
 	unsigned long	bi_arm_freq; /* arm frequency */
diff --git a/arch/arm/lib/board.c b/arch/arm/lib/board.c
index 0b47ab3..92cad9a 100644
--- a/arch/arm/lib/board.c
+++ b/arch/arm/lib/board.c
@@ -57,13 +57,6 @@
 #include <miiphy.h>
 #endif
 
-#ifdef CONFIG_DRIVER_SMC91111
-#include "../drivers/net/smc91111.h"
-#endif
-#ifdef CONFIG_DRIVER_LAN91C96
-#include "../drivers/net/lan91c96.h"
-#endif
-
 DECLARE_GLOBAL_DATA_PTR;
 
 ulong monitor_flash_len;
@@ -274,6 +267,8 @@
 #ifdef CONFIG_PRAM
 	ulong reg;
 #endif
+	void *new_fdt = NULL;
+	size_t fdt_size = 0;
 
 	bootstage_mark_name(BOOTSTAGE_ID_START_UBOOT_F, "board_init_f");
 
@@ -409,6 +404,22 @@
 	debug("Reserving %zu Bytes for Global Data at: %08lx\n",
 			sizeof (gd_t), addr_sp);
 
+#if defined(CONFIG_OF_SEPARATE) && defined(CONFIG_OF_CONTROL)
+	/*
+	 * If the device tree is sitting immediate above our image then we
+	 * must relocate it. If it is embedded in the data section, then it
+	 * will be relocated with other data.
+	 */
+	if (gd->fdt_blob) {
+		fdt_size = ALIGN(fdt_totalsize(gd->fdt_blob) + 0x1000, 32);
+
+		addr_sp -= fdt_size;
+		new_fdt = (void *)addr_sp;
+		debug("Reserving %zu Bytes for FDT at: %08lx\n",
+		      fdt_size, addr_sp);
+	}
+#endif
+
 	/* setup stackpointer for exeptions */
 	gd->irq_sp = addr_sp;
 #ifdef CONFIG_USE_IRQ
@@ -442,6 +453,10 @@
 	gd->start_addr_sp = addr_sp;
 	gd->reloc_off = addr - _TEXT_BASE;
 	debug("relocation Offset is: %08lx\n", gd->reloc_off);
+	if (new_fdt) {
+		memcpy(new_fdt, gd->fdt_blob, fdt_size);
+		gd->fdt_blob = new_fdt;
+	}
 	memcpy(id, (void *)gd, sizeof(gd_t));
 
 	relocate_code(addr_sp, id, addr);
@@ -591,16 +606,6 @@
 	/* enable exceptions */
 	enable_interrupts();
 
-	/* Perform network card initialisation if necessary */
-#if defined(CONFIG_DRIVER_SMC91111) || defined (CONFIG_DRIVER_LAN91C96)
-	/* XXX: this needs to be moved to board init */
-	if (getenv("ethaddr")) {
-		uchar enetaddr[6];
-		eth_getenv_enetaddr("ethaddr", enetaddr);
-		smc_set_mac_addr(enetaddr);
-	}
-#endif /* CONFIG_DRIVER_SMC91111 || CONFIG_DRIVER_LAN91C96 */
-
 	/* Initialize from environment */
 	load_addr = getenv_ulong("loadaddr", 16, load_addr);
 
diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c
index 37476cc..1bd2730 100644
--- a/arch/arm/lib/bootm.c
+++ b/arch/arm/lib/bootm.c
@@ -34,6 +34,7 @@
 #include <libfdt.h>
 #include <fdt_support.h>
 #include <asm/bootm.h>
+#include <linux/compiler.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -269,6 +270,8 @@
 }
 #endif
 
+__weak void setup_board_tags(struct tag **in_params) {}
+
 /* Subcommand: PREP */
 static void boot_prep_linux(bootm_headers_t *images)
 {
@@ -310,6 +313,7 @@
 			setup_initrd_tag(gd->bd, images->rd_start,
 			images->rd_end);
 #endif
+		setup_board_tags(&params);
 		setup_end_tag(gd->bd);
 #else /* all tags */
 		printf("FDT and ATAGS support not compiled in - hanging\n");
diff --git a/arch/avr32/cpu/u-boot.lds b/arch/avr32/cpu/u-boot.lds
index 0e532f2..0b16d2a 100644
--- a/arch/avr32/cpu/u-boot.lds
+++ b/arch/avr32/cpu/u-boot.lds
@@ -47,11 +47,11 @@
 	}
 
 	. = ALIGN(4);
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : {
-		KEEP(*(.u_boot_cmd))
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
 	}
-	__u_boot_cmd_end = .;
 
 	. = ALIGN(4);
 	_got = .;
diff --git a/arch/avr32/include/asm/global_data.h b/arch/avr32/include/asm/global_data.h
index 7878bb1..bf661e2 100644
--- a/arch/avr32/include/asm/global_data.h
+++ b/arch/avr32/include/asm/global_data.h
@@ -33,7 +33,7 @@
 typedef	struct	global_data {
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	stack_end;	/* highest stack address */
 	unsigned long	have_console;	/* serial_init() was called */
 #ifdef CONFIG_PRE_CONSOLE_BUFFER
diff --git a/arch/avr32/include/asm/u-boot.h b/arch/avr32/include/asm/u-boot.h
index 1d2959a..97bbbde 100644
--- a/arch/avr32/include/asm/u-boot.h
+++ b/arch/avr32/include/asm/u-boot.h
@@ -23,7 +23,7 @@
 #define __ASM_U_BOOT_H__ 1
 
 typedef struct bd_info {
-	unsigned long		bi_baudrate;
+	unsigned int		bi_baudrate;
 	unsigned char		bi_phy_id[4];
 	unsigned long		bi_board_number;
 	void			*bi_boot_params;
diff --git a/arch/avr32/lib/board.c b/arch/avr32/lib/board.c
index 9d3b76e..e3287c4 100644
--- a/arch/avr32/lib/board.c
+++ b/arch/avr32/lib/board.c
@@ -272,8 +272,8 @@
 	/*
 	 * We have to relocate the command table manually
 	 */
-	fixup_cmdtable(&__u_boot_cmd_start,
-		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+	fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+			ll_entry_count(cmd_tbl_t, cmd));
 #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
diff --git a/arch/blackfin/cpu/u-boot.lds b/arch/blackfin/cpu/u-boot.lds
index 2b8d285..58db838 100644
--- a/arch/blackfin/cpu/u-boot.lds
+++ b/arch/blackfin/cpu/u-boot.lds
@@ -112,11 +112,9 @@
 		CONSTRUCTORS
 	} >ram_data
 
-	.u_boot_cmd :
-	{
-		___u_boot_cmd_start = .;
-		*(.u_boot_cmd)
-		___u_boot_cmd_end = .;
+
+	.u_boot_list : {
+		#include <u-boot.lst>
 	} >ram_data
 
 	.text_l1 :
diff --git a/arch/blackfin/include/asm/global_data.h b/arch/blackfin/include/asm/global_data.h
index 290a9e7..d91e5a4 100644
--- a/arch/blackfin/include/asm/global_data.h
+++ b/arch/blackfin/include/asm/global_data.h
@@ -41,7 +41,7 @@
 	bd_t *bd;
 	unsigned long flags;
 	unsigned long board_type;
-	unsigned long baudrate;
+	unsigned int baudrate;
 	unsigned long have_console;	/* serial_init() was called */
 #ifdef CONFIG_PRE_CONSOLE_BUFFER
 	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
diff --git a/arch/blackfin/include/asm/u-boot.h b/arch/blackfin/include/asm/u-boot.h
index df81183..7abd6c2 100644
--- a/arch/blackfin/include/asm/u-boot.h
+++ b/arch/blackfin/include/asm/u-boot.h
@@ -29,7 +29,7 @@
 #define _U_BOOT_H_	1
 
 typedef struct bd_info {
-	int bi_baudrate;		/* serial console baudrate */
+	unsigned int bi_baudrate;	/* serial console baudrate */
 	unsigned long bi_boot_params;	/* where this board expects params */
 	unsigned long bi_memstart;	/* start of DRAM memory */
 	phys_size_t bi_memsize;		/* size  of DRAM memory in bytes */
diff --git a/arch/blackfin/lib/board.c b/arch/blackfin/lib/board.c
index e47b606..9fbbea0 100644
--- a/arch/blackfin/lib/board.c
+++ b/arch/blackfin/lib/board.c
@@ -78,7 +78,7 @@
 	printf(" gd: %p\n", gd);
 	printf(" |-flags: %lx\n", gd->flags);
 	printf(" |-board_type: %lx\n", gd->board_type);
-	printf(" |-baudrate: %lu\n", gd->baudrate);
+	printf(" |-baudrate: %u\n", gd->baudrate);
 	printf(" |-have_console: %lx\n", gd->have_console);
 	printf(" |-ram_size: %lx\n", gd->ram_size);
 	printf(" |-env_addr: %lx\n", gd->env_addr);
diff --git a/arch/m68k/cpu/mcf5227x/cpu_init.c b/arch/m68k/cpu/mcf5227x/cpu_init.c
index e23b20d..1928eb3 100644
--- a/arch/m68k/cpu/mcf5227x/cpu_init.c
+++ b/arch/m68k/cpu/mcf5227x/cpu_init.c
@@ -31,6 +31,7 @@
 #include <asm/immap.h>
 #include <asm/io.h>
 #include <asm/rtc.h>
+#include <linux/compiler.h>
 
 /*
  * Breath some life into the CPU...
@@ -41,12 +42,13 @@
  */
 void cpu_init_f(void)
 {
-	scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
-	pll_t *pll = (pll_t *)MMAP_PLL;
+	fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS;
 
 #if !defined(CONFIG_CF_SBF)
+	scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
+	pll_t *pll = (pll_t *)MMAP_PLL;
+
 	/* Workaround, must place before fbcs */
 	out_be32(&pll->psr, 0x12);
 
diff --git a/arch/m68k/cpu/mcf5227x/start.S b/arch/m68k/cpu/mcf5227x/start.S
index c5096a8..a683778 100644
--- a/arch/m68k/cpu/mcf5227x/start.S
+++ b/arch/m68k/cpu/mcf5227x/start.S
@@ -485,7 +485,7 @@
 /* exception code */
 	.globl _fault
 _fault:
-	jmp _fault
+	bra _fault
 	.globl	_exc_handler
 
 _exc_handler:
diff --git a/arch/m68k/cpu/mcf523x/start.S b/arch/m68k/cpu/mcf523x/start.S
index e6a69ab..05f1723 100644
--- a/arch/m68k/cpu/mcf523x/start.S
+++ b/arch/m68k/cpu/mcf523x/start.S
@@ -247,7 +247,7 @@
 /* exception code */
 	.globl _fault
 _fault:
-	jmp _fault
+	bra _fault
 	.globl	_exc_handler
 
 _exc_handler:
diff --git a/arch/m68k/cpu/mcf52x2/start.S b/arch/m68k/cpu/mcf52x2/start.S
index ee17792..f5e55dd 100644
--- a/arch/m68k/cpu/mcf52x2/start.S
+++ b/arch/m68k/cpu/mcf52x2/start.S
@@ -307,7 +307,7 @@
 /* exception code */
 	.globl _fault
 _fault:
-	jmp _fault
+	bra _fault
 
 	.globl	_exc_handler
 _exc_handler:
diff --git a/arch/m68k/cpu/mcf532x/start.S b/arch/m68k/cpu/mcf532x/start.S
index fe98d76..583ed1d 100644
--- a/arch/m68k/cpu/mcf532x/start.S
+++ b/arch/m68k/cpu/mcf532x/start.S
@@ -261,7 +261,7 @@
 /* exception code */
 	.globl _fault
 _fault:
-	jmp _fault
+	bra _fault
 	.globl	_exc_handler
 
 _exc_handler:
diff --git a/arch/m68k/cpu/mcf5445x/config.mk b/arch/m68k/cpu/mcf5445x/config.mk
index 61a731e..0c48783 100644
--- a/arch/m68k/cpu/mcf5445x/config.mk
+++ b/arch/m68k/cpu/mcf5445x/config.mk
@@ -4,6 +4,8 @@
 # (C) Copyright 2000-2004
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
+# Copyright 2011-2012 Freescale Semiconductor, Inc.
+#
 # See file CREDITS for list of people who contributed to this
 # project.
 #
@@ -24,7 +26,15 @@
 #
 
 PLATFORM_RELFLAGS += -ffixed-d7 -msep-data
+
+cfg=$(shell grep configs $(OBJTREE)/include/config.h | sed 's/.*<\(configs.*\)>/\1/')
+is5441x:=$(shell grep CONFIG_MCF5441x $(TOPDIR)/include/$(cfg))
+
+ifneq (,$(findstring CONFIG_MCF5441x,$(is5441x)))
+PLATFORM_CPPFLAGS += -mcpu=54418 -fPIC
+else
 PLATFORM_CPPFLAGS += -mcpu=54455 -fPIC
+endif
 
 ifneq (,$(findstring -linux-,$(shell $(CC) --version)))
 ifneq (,$(findstring GOT,$(shell $(LD) --help)))
diff --git a/arch/m68k/cpu/mcf5445x/cpu.c b/arch/m68k/cpu/mcf5445x/cpu.c
index adfc708..b612cda 100644
--- a/arch/m68k/cpu/mcf5445x/cpu.c
+++ b/arch/m68k/cpu/mcf5445x/cpu.c
@@ -39,6 +39,8 @@
 {
 	rcm_t *rcm = (rcm_t *) (MMAP_RCM);
 	udelay(1000);
+	out_8(&rcm->rcr, RCM_RCR_FRCRSTOUT);
+	udelay(10000);
 	setbits_8(&rcm->rcr, RCM_RCR_SOFTRST);
 
 	/* we don't return! */
@@ -74,6 +76,21 @@
 	case 0x4f:
 		id = 54450;
 		break;
+	case 0x9F:
+		id = 54410;
+		break;
+	case 0xA0:
+		id = 54415;
+		break;
+	case 0xA1:
+		id = 54416;
+		break;
+	case 0xA2:
+		id = 54417;
+		break;
+	case 0xA3:
+		id = 54418;
+		break;
 	}
 
 	if (id) {
diff --git a/arch/m68k/cpu/mcf5445x/cpu_init.c b/arch/m68k/cpu/mcf5445x/cpu_init.c
index 3f9209f..6e947d0 100644
--- a/arch/m68k/cpu/mcf5445x/cpu_init.c
+++ b/arch/m68k/cpu/mcf5445x/cpu_init.c
@@ -31,6 +31,7 @@
 #include <asm/processor.h>
 #include <asm/rtc.h>
 #include <asm/io.h>
+#include <linux/compiler.h>
 
 #if defined(CONFIG_CMD_NET)
 #include <config.h>
@@ -38,37 +39,11 @@
 #include <asm/fec.h>
 #endif
 
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f(void)
+void init_fbcs(void)
 {
-	scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
-	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
+	fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS;
 
-	out_be32(&scm1->mpr, 0x77777777);
-	out_be32(&scm1->pacra, 0);
-	out_be32(&scm1->pacrb, 0);
-	out_be32(&scm1->pacrc, 0);
-	out_be32(&scm1->pacrd, 0);
-	out_be32(&scm1->pacre, 0);
-	out_be32(&scm1->pacrf, 0);
-	out_be32(&scm1->pacrg, 0);
-
-	/* FlexBus */
-	out_8(&gpio->par_be,
-		GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
-		GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
-	out_8(&gpio->par_fbctl,
-		GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
-		GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
-
-#if !defined(CONFIG_CF_SBF)
+#if !defined(CONFIG_SERIAL_BOOT)
 #if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
 	out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
 	out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
@@ -106,6 +81,145 @@
 	out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
 	out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
 #endif
+}
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f(void)
+{
+	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+#ifdef CONFIG_MCF5441x
+	scm_t *scm = (scm_t *) MMAP_SCM;
+	pm_t *pm = (pm_t *) MMAP_PM;
+
+	/* Disable Switch */
+	*(unsigned long *)(MMAP_L2_SW0 + 0x00000024) = 0;
+
+	/* Disable core watchdog */
+	out_be16(&scm->cwcr, 0);
+	out_8(&gpio->par_fbctl,
+		GPIO_PAR_FBCTL_ALE_FB_ALE | GPIO_PAR_FBCTL_OE_FB_OE |
+		GPIO_PAR_FBCTL_FBCLK | GPIO_PAR_FBCTL_RW |
+		GPIO_PAR_FBCTL_TA_TA);
+	out_8(&gpio->par_be,
+		GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
+		GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
+
+	/* eDMA */
+	out_8(&pm->pmcr0, 17);
+
+	/* INTR0 - INTR2 */
+	out_8(&pm->pmcr0, 18);
+	out_8(&pm->pmcr0, 19);
+	out_8(&pm->pmcr0, 20);
+
+	/* I2C */
+	out_8(&pm->pmcr0, 22);
+	out_8(&pm->pmcr1, 4);
+	out_8(&pm->pmcr1, 7);
+
+	/* DTMR0 - DTMR3*/
+	out_8(&pm->pmcr0, 28);
+	out_8(&pm->pmcr0, 29);
+	out_8(&pm->pmcr0, 30);
+	out_8(&pm->pmcr0, 31);
+
+	/* PIT0 - PIT3 */
+	out_8(&pm->pmcr0, 32);
+	out_8(&pm->pmcr0, 33);
+	out_8(&pm->pmcr0, 34);
+	out_8(&pm->pmcr0, 35);
+
+	/* Edge Port */
+	out_8(&pm->pmcr0, 36);
+	out_8(&pm->pmcr0, 37);
+
+	/* USB OTG */
+	out_8(&pm->pmcr0, 44);
+	/* USB Host */
+	out_8(&pm->pmcr0, 45);
+
+	/* ESDHC */
+	out_8(&pm->pmcr0, 51);
+
+	/* ENET0 - ENET1 */
+	out_8(&pm->pmcr0, 53);
+	out_8(&pm->pmcr0, 54);
+
+	/* NAND */
+	out_8(&pm->pmcr0, 63);
+
+#ifdef CONFIG_SYS_I2C_0
+	out_8(&gpio->par_cani2c, 0xF0);
+	/* I2C0 pull up */
+	out_be16(&gpio->pcr_b, 0x003C);
+	/* I2C0 max speed */
+	out_8(&gpio->srcr_cani2c, 0x03);
+#endif
+#ifdef CONFIG_SYS_I2C_2
+	/* I2C2 */
+	out_8(&gpio->par_ssi0h, 0xA0);
+	/* I2C2, UART7 */
+	out_8(&gpio->par_ssi0h, 0xA8);
+	/* UART7 */
+	out_8(&gpio->par_ssi0l, 0x2);
+	/* UART8, UART9 */
+	out_8(&gpio->par_cani2c, 0xAA);
+	/* UART4, UART0 */
+	out_8(&gpio->par_uart0, 0xAF);
+	/* UART5, UART1 */
+	out_8(&gpio->par_uart1, 0xAF);
+	/* UART6, UART2 */
+	out_8(&gpio->par_uart2, 0xAF);
+	/* I2C2 pull up */
+	out_be16(&gpio->pcr_h, 0xF000);
+#endif
+#ifdef CONFIG_SYS_I2C_5
+	/* I2C5 */
+	out_8(&gpio->par_uart1, 0x0A);
+	/* I2C5 pull up */
+	out_be16(&gpio->pcr_e, 0x0003);
+	out_be16(&gpio->pcr_f, 0xC000);
+#endif
+
+	/* Lowest slew rate for UART0,1,2 */
+	out_8(&gpio->srcr_uart, 0x00);
+#endif		/* CONFIG_MCF5441x */
+
+#ifdef CONFIG_MCF5445x
+	scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
+
+	out_be32(&scm1->mpr, 0x77777777);
+	out_be32(&scm1->pacra, 0);
+	out_be32(&scm1->pacrb, 0);
+	out_be32(&scm1->pacrc, 0);
+	out_be32(&scm1->pacrd, 0);
+	out_be32(&scm1->pacre, 0);
+	out_be32(&scm1->pacrf, 0);
+	out_be32(&scm1->pacrg, 0);
+
+	/* FlexBus */
+	out_8(&gpio->par_be,
+		GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
+		GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
+	out_8(&gpio->par_fbctl,
+		GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
+		GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
+
+#ifdef CONFIG_FSL_I2C
+	out_be16(&gpio->par_feci2c,
+		GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
+#endif
+#endif		/* CONFIG_MCF5445x */
+
+	/* FlexBus Chipselect */
+	init_fbcs();
 
 	/*
 	 * now the flash base address is no longer at 0 (Newer ColdFire family
@@ -115,11 +229,6 @@
 	if (CONFIG_SYS_CS0_BASE != 0)
 		setvbr(CONFIG_SYS_CS0_BASE);
 
-#ifdef CONFIG_FSL_I2C
-	out_be16(&gpio->par_feci2c,
-		GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
-#endif
-
 	icache_enable();
 }
 
@@ -142,9 +251,95 @@
 void uart_port_conf(int port)
 {
 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+#ifdef CONFIG_MCF5441x
+	pm_t *pm = (pm_t *) MMAP_PM;
+#endif
 
 	/* Setup Ports: */
 	switch (port) {
+#ifdef CONFIG_MCF5441x
+	case 0:
+		/* UART0 */
+		out_8(&pm->pmcr0, 24);
+		clrbits_8(&gpio->par_uart0,
+			~(GPIO_PAR_UART0_U0RXD_MASK | GPIO_PAR_UART0_U0TXD_MASK));
+		setbits_8(&gpio->par_uart0,
+			GPIO_PAR_UART0_U0RXD_U0RXD | GPIO_PAR_UART0_U0TXD_U0TXD);
+		break;
+	case 1:
+		/* UART1 */
+		out_8(&pm->pmcr0, 25);
+		clrbits_8(&gpio->par_uart1,
+			~(GPIO_PAR_UART1_U1RXD_MASK | GPIO_PAR_UART1_U1TXD_MASK));
+		setbits_8(&gpio->par_uart1,
+			GPIO_PAR_UART1_U1RXD_U1RXD | GPIO_PAR_UART1_U1TXD_U1TXD);
+		break;
+	case 2:
+		/* UART2 */
+		out_8(&pm->pmcr0, 26);
+		clrbits_8(&gpio->par_uart2,
+			~(GPIO_PAR_UART2_U2RXD_MASK | GPIO_PAR_UART2_U2TXD_MASK));
+		setbits_8(&gpio->par_uart2,
+			GPIO_PAR_UART2_U2RXD_U2RXD | GPIO_PAR_UART2_U2TXD_U2TXD);
+		break;
+	case 3:
+		/* UART3 */
+		out_8(&pm->pmcr0, 27);
+		clrbits_8(&gpio->par_dspi0,
+			~(GPIO_PAR_DSPI0_SIN_MASK | GPIO_PAR_DSPI0_SOUT_MASK));
+		setbits_8(&gpio->par_dspi0,
+			GPIO_PAR_DSPI0_SIN_U3RXD | GPIO_PAR_DSPI0_SOUT_U3TXD);
+		break;
+	case 4:
+		/* UART4 */
+		out_8(&pm->pmcr1, 24);
+		clrbits_8(&gpio->par_uart0,
+			~(GPIO_PAR_UART0_U0CTS_MASK | GPIO_PAR_UART0_U0RTS_MASK));
+		setbits_8(&gpio->par_uart0,
+			GPIO_PAR_UART0_U0CTS_U4TXD | GPIO_PAR_UART0_U0RTS_U4RXD);
+		break;
+	case 5:
+		/* UART5 */
+		out_8(&pm->pmcr1, 25);
+		clrbits_8(&gpio->par_uart1,
+			~(GPIO_PAR_UART1_U1CTS_MASK | GPIO_PAR_UART1_U1RTS_MASK));
+		setbits_8(&gpio->par_uart1,
+			GPIO_PAR_UART1_U1CTS_U5TXD | GPIO_PAR_UART1_U1RTS_U5RXD);
+		break;
+	case 6:
+		/* UART6 */
+		out_8(&pm->pmcr1, 26);
+		clrbits_8(&gpio->par_uart2,
+			~(GPIO_PAR_UART2_U2CTS_MASK | GPIO_PAR_UART2_U2RTS_MASK));
+		setbits_8(&gpio->par_uart2,
+			GPIO_PAR_UART2_U2CTS_U6TXD | GPIO_PAR_UART2_U2RTS_U6RXD);
+		break;
+	case 7:
+		/* UART7 */
+		out_8(&pm->pmcr1, 27);
+		clrbits_8(&gpio->par_ssi0h, ~GPIO_PAR_SSI0H_RXD_MASK);
+		clrbits_8(&gpio->par_ssi0l, ~GPIO_PAR_SSI0L_BCLK_MASK);
+		setbits_8(&gpio->par_ssi0h, GPIO_PAR_SSI0H_FS_U7TXD);
+		setbits_8(&gpio->par_ssi0l, GPIO_PAR_SSI0L_BCLK_U7RXD);
+		break;
+	case 8:
+		/* UART8 */
+		out_8(&pm->pmcr0, 28);
+		clrbits_8(&gpio->par_cani2c,
+			~(GPIO_PAR_CANI2C_I2C0SCL_MASK | GPIO_PAR_CANI2C_I2C0SDA_MASK));
+		setbits_8(&gpio->par_cani2c,
+			GPIO_PAR_CANI2C_I2C0SCL_U8TXD | GPIO_PAR_CANI2C_I2C0SDA_U8RXD);
+		break;
+	case 9:
+		/* UART9 */
+		out_8(&pm->pmcr1, 29);
+		clrbits_8(&gpio->par_cani2c,
+			~(GPIO_PAR_CANI2C_CAN1TX_MASK | GPIO_PAR_CANI2C_CAN1RX_MASK));
+		setbits_8(&gpio->par_cani2c,
+			GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD);
+		break;
+#endif
+#ifdef CONFIG_MCF5445x
 	case 0:
 		clrbits_8(&gpio->par_uart,
 			GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
@@ -177,6 +372,7 @@
 			GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD);
 #endif
 		break;
+#endif	/* CONFIG_MCF5445x */
 	}
 }
 
@@ -186,6 +382,7 @@
 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
 
+#ifdef CONFIG_MCF5445x
 	if (setclear) {
 #ifdef CONFIG_SYS_FEC_NO_SHARED_PHY
 		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
@@ -223,6 +420,21 @@
 #endif
 		}
 	}
+#endif	/* CONFIG_MCF5445x */
+
+#ifdef CONFIG_MCF5441x
+	if (setclear) {
+		out_8(&gpio->par_fec, 0x03);
+		out_8(&gpio->srcr_fec, 0x0F);
+		clrsetbits_8(&gpio->par_simp0h, ~GPIO_PAR_SIMP0H_DAT_MASK,
+			GPIO_PAR_SIMP0H_DAT_GPIO);
+		clrsetbits_8(&gpio->pddr_g, ~GPIO_PDDR_G4_MASK,
+			GPIO_PDDR_G4_OUTPUT);
+		clrbits_8(&gpio->podr_g, ~GPIO_PODR_G4_MASK);
+
+	} else
+		clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC_MASK);
+#endif
 	return 0;
 }
 #endif
@@ -232,10 +444,24 @@
 {
 	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
+#ifdef CONFIG_MCF5445x
 	out_8(&gpio->par_dspi,
 		GPIO_PAR_DSPI_SIN_SIN |
 		GPIO_PAR_DSPI_SOUT_SOUT |
 		GPIO_PAR_DSPI_SCK_SCK);
+#endif
+
+#ifdef CONFIG_MCF5441x
+	pm_t *pm = (pm_t *) MMAP_PM;
+
+	out_8(&gpio->par_dspi0,
+		GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT |
+		GPIO_PAR_DSPI0_SCK_DSPI0SCK);
+	out_8(&gpio->srcr_dspiow, 3);
+
+	/* DSPI0 */
+	out_8(&pm->pmcr0, 23);
+#endif
 }
 
 int cfspi_claim_bus(uint bus, uint cs)
@@ -249,6 +475,7 @@
 	/* Clear FIFO and resume transfer */
 	clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
 
+#ifdef CONFIG_MCF5445x
 	switch (cs) {
 	case 0:
 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
@@ -271,6 +498,20 @@
 		setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
 		break;
 	}
+#endif
+
+#ifdef CONFIG_MCF5441x
+	switch (cs) {
+	case 0:
+		clrbits_8(&gpio->par_dspi0, ~GPIO_PAR_DSPI0_PCS0_MASK);
+		setbits_8(&gpio->par_dspi0, GPIO_PAR_DSPI0_PCS0_DSPI0PCS0);
+		break;
+	case 1:
+		clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
+		setbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
+		break;
+	}
+#endif
 
 	return 0;
 }
@@ -283,6 +524,7 @@
 	/* Clear FIFO */
 	clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
 
+#ifdef CONFIG_MCF5445x
 	switch (cs) {
 	case 0:
 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
@@ -300,5 +542,11 @@
 		clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
 		break;
 	}
+#endif
+
+#ifdef CONFIG_MCF5441x
+	if (cs == 1)
+		clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
+#endif
 }
 #endif
diff --git a/arch/m68k/cpu/mcf5445x/speed.c b/arch/m68k/cpu/mcf5445x/speed.c
index 073b7ef..55d1c48 100644
--- a/arch/m68k/cpu/mcf5445x/speed.c
+++ b/arch/m68k/cpu/mcf5445x/speed.c
@@ -57,8 +57,10 @@
 	/* Round divider down to nearest power of two */
 	for (i = 0, j = lpdiv; j != 1; j >>= 1, i++) ;
 
+#ifdef CONFIG_MCF5445x
 	/* Apply the divider to the system clock */
 	clrsetbits_be16(&ccm->cdr, 0x0f00, CCM_CDR_LPDIV(i));
+#endif
 
 	/* Enable Limp Mode */
 	setbits_be16(&ccm->misccr, CCM_MISCCR_LIMP);
@@ -81,19 +83,76 @@
 		;
 }
 
-/*
- * get_clocks() fills in gd->cpu_clock and gd->bus_clk
- */
-int get_clocks(void)
+#ifdef CONFIG_MCF5441x
+void setup_5441x_clocks(void)
 {
+	ccm_t *ccm = (ccm_t *)MMAP_CCM;
+	pll_t *pll = (pll_t *)MMAP_PLL;
+	int temp, vco = 0, bootmod_ccr, pdr;
 
+	bootmod_ccr = (in_be16(&ccm->ccr) & CCM_CCR_BOOTMOD) >> 14;
+
+	switch (bootmod_ccr) {
+	case 0:
+		out_be32(&pll->pcr, 0x00000013);
+		out_be32(&pll->pdr, 0x00e70c61);
+		clock_exit_limp();
+		break;
+	case 2:
+		break;
+	case 3:
+		break;
+	}
+
+	/*Change frequency for Modelo SER1 USB host*/
+#ifdef CONFIG_LOW_MCFCLK
+	temp = in_be32(&pll->pcr);
+	temp &= ~0x3f;
+	temp |= 5;
+	out_be32(&pll->pcr, temp);
+
+	temp = in_be32(&pll->pdr);
+	temp &= ~0x001f0000;
+	temp |= 0x00040000;
+	out_be32(&pll->pdr, temp);
+	__asm__("tpf");
+#endif
+
+	setbits_be16(&ccm->misccr2, 0x02);
+
+	vco =  ((in_be32(&pll->pcr) & PLL_CR_FBKDIV_BITS) + 1) *
+		CONFIG_SYS_INPUT_CLKSRC;
+	gd->vco_clk = vco;
+
+	gd->inp_clk = CONFIG_SYS_INPUT_CLKSRC;	/* Input clock */
+
+	pdr = in_be32(&pll->pdr);
+	temp = (pdr & PLL_DR_OUTDIV1_BITS) + 1;
+	gd->cpu_clk = vco / temp;	/* cpu clock */
+	gd->flb_clk = vco / temp;	/* FlexBus clock */
+	gd->flb_clk >>= 1;
+	if (in_be16(ccm->misccr2) & 2)		/* fsys/4 */
+		gd->flb_clk >>= 1;
+
+	temp = ((pdr & PLL_DR_OUTDIV2_BITS) >> 5) + 1;
+	gd->bus_clk = vco / temp;	/* bus clock */
+
+}
+#endif
+
+#ifdef CONFIG_MCF5445x
+void setup_5445x_clocks(void)
+{
 	ccm_t *ccm = (ccm_t *)MMAP_CCM;
 	pll_t *pll = (pll_t *)MMAP_PLL;
 	int pllmult_nopci[] = { 20, 10, 24, 18, 12, 6, 16, 8 };
 	int pllmult_pci[] = { 12, 6, 16, 8 };
-	int vco = 0, bPci, temp, fbtemp, pcrvalue;
+	int vco = 0, temp, fbtemp, pcrvalue;
 	int *pPllmult = NULL;
 	u16 fbpll_mask;
+#ifdef CONFIG_PCI
+	int bPci;
+#endif
 
 #ifdef CONFIG_M54455EVB
 	u8 *cpld = (u8 *)(CONFIG_SYS_CS2_BASE + 3);
@@ -105,14 +164,16 @@
 	    ((in_be16(&ccm->ccr) & CCM_CCR_360_FBCONFIG_MASK) == 0x0060)) {
 		pPllmult = &pllmult_pci[0];
 		fbpll_mask = 3;		/* 11b */
+#ifdef CONFIG_PCI
 		bPci = 1;
+#endif
 	} else {
 		pPllmult = &pllmult_nopci[0];
 		fbpll_mask = 7;		/* 111b */
 #ifdef CONFIG_PCI
 		gd->pci_clk = 0;
-#endif
 		bPci = 0;
+#endif
 	}
 
 #ifdef CONFIG_M54455EVB
@@ -215,6 +276,22 @@
 #ifdef CONFIG_FSL_I2C
 	gd->i2c1_clk = gd->bus_clk;
 #endif
+}
+#endif
+
+/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
+int get_clocks(void)
+{
+#ifdef CONFIG_MCF5441x
+	setup_5441x_clocks();
+#endif
+#ifdef CONFIG_MCF5445x
+	setup_5445x_clocks();
+#endif
+
+#ifdef CONFIG_FSL_I2C
+	gd->i2c1_clk = gd->bus_clk;
+#endif
 
 	return (0);
 }
diff --git a/arch/m68k/cpu/mcf5445x/start.S b/arch/m68k/cpu/mcf5445x/start.S
index 9906014..5fc944d 100644
--- a/arch/m68k/cpu/mcf5445x/start.S
+++ b/arch/m68k/cpu/mcf5445x/start.S
@@ -2,6 +2,9 @@
  * Copyright (C) 2003	Josef Baumgartner <josef.baumgartner@telex.de>
  * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
  *
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -21,8 +24,10 @@
  * MA 02111-1307 USA
  */
 
+#include <common.h>
 #include <asm-offsets.h>
 #include <config.h>
+#include <timestamp.h>
 #include "version.h"
 #include <asm/cache.h>
 
@@ -43,8 +48,9 @@
 	addl	#60,%sp;		/* space for 15 regs */ \
 	rte;
 
-#if defined(CONFIG_CF_SBF)
+#if defined(CONFIG_SERIAL_BOOT)
 #define ASM_DRAMINIT	(asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_DRAMINIT_N	(asm_dram_init - TEXT_BASE)
 #define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
 #endif
 
@@ -55,10 +61,15 @@
  *	These vectors are to catch any un-intended traps.
  */
 _vectors:
-#if defined(CONFIG_CF_SBF)
+#if defined(CONFIG_SERIAL_BOOT)
 
 INITSP:	.long	0		/* Initial SP	*/
+#ifdef CONFIG_CF_SBF
 INITPC:	.long	ASM_DRAMINIT	/* Initial PC 	*/
+#endif
+#ifdef CONFIG_SYS_NAND_BOOT
+INITPC:	.long	ASM_DRAMINIT_N	/* Initial PC 	*/
+#endif
 
 #else
 
@@ -95,7 +106,7 @@
 vector1E:	.long	_FAULT	/* Autovector Level 6	*/
 vector1F:	.long	_FAULT	/* Autovector Level 7	*/
 
-#if !defined(CONFIG_CF_SBF)
+#if !defined(CONFIG_SERIAL_BOOT)
 
 /* TRAP #0 - #15 */
 vector20_2F:
@@ -138,16 +149,26 @@
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 #endif
 
-#if defined(CONFIG_CF_SBF)
+#if defined(CONFIG_SERIAL_BOOT)
 	/* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */
 asm_sbf_img_hdr:
 	.long	0x00000000	/* checksum, not yet implemented */
-	.long	0x00030000	/* image length */
+	.long	0x00040000	/* image length */
 	.long	CONFIG_SYS_TEXT_BASE	/* image to be relocated at */
 
 asm_dram_init:
 	move.w #0x2700,%sr		/* Mask off Interrupt */
 
+#ifdef CONFIG_SYS_NAND_BOOT
+	/* for assembly stack */
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
+	movec	%d0, %RAMBAR1
+
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
+	clr.l %sp@-
+#endif
+
+#ifdef CONFIG_CF_SBF
 	move.l	#CONFIG_SYS_INIT_RAM_ADDR, %d0
 	movec	%d0, %VBR
 
@@ -180,7 +201,90 @@
 	move.l	#(CONFIG_SYS_CS0_CTRL), (%a1)
 	move.l	#0xFC008004, %a1
 	move.l	#(CONFIG_SYS_CS0_MASK), (%a1)
+#endif			/* CONFIG_CF_SBF */
 
+#ifdef CONFIG_MCF5441x
+	/* TC: enable all peripherals,
+	in the future only enable certain peripherals */
+	move.l	#0xFC04002D, %a1
+
+#if defined(CONFIG_CF_SBF)
+	move.b	#23, (%a1)	/* dspi */
+#endif
+	move.b	#46, (%a1)	/* DDR */
+
+	/* slew settings */
+	move.l	#0xEC094060, %a1
+	move.b	#0, (%a1)
+
+	/* use vco instead of cpu*2 clock for ddr clock */
+	move.l	#0xEC09001A, %a1
+	move.w	#0xE01D, (%a1)
+
+	/* DDR settings */
+	move.l	#0xFC0B8180, %a1
+	move.l	#0x00000000, (%a1)
+	move.l	#0x40000000, (%a1)
+
+	move.l	#0xFC0B81AC, %a1
+	move.l	#0x01030203, (%a1)
+
+	move.l	#0xFC0B8000, %a1
+	move.l	#0x01010101, (%a1)+	/* 0x00 */
+	move.l	#0x00000101, (%a1)+	/* 0x04 */
+	move.l	#0x01010100, (%a1)+	/* 0x08 */
+	move.l	#0x01010000, (%a1)+	/* 0x0C */
+	move.l	#0x00010101, (%a1)+	/* 0x10 */
+	move.l	#0xFC0B8018, %a1
+	move.l	#0x00010100, (%a1)+	/* 0x18 */
+	move.l	#0x00000001, (%a1)+	/* 0x1C */
+	move.l	#0x01000001, (%a1)+	/* 0x20 */
+	move.l	#0x00000100, (%a1)+	/* 0x24 */
+	move.l	#0x00010001, (%a1)+	/* 0x28 */
+	move.l	#0x00000200, (%a1)+	/* 0x2C */
+	move.l	#0x01000002, (%a1)+	/* 0x30 */
+	move.l	#0x00000000, (%a1)+	/* 0x34 */
+	move.l	#0x00000100, (%a1)+	/* 0x38 */
+	move.l	#0x02000100, (%a1)+	/* 0x3C */
+	move.l	#0x02000407, (%a1)+	/* 0x40 */
+	move.l	#0x02030007, (%a1)+	/* 0x44 */
+	move.l	#0x02000100, (%a1)+	/* 0x48 */
+	move.l	#0x0A030203, (%a1)+	/* 0x4C */
+	move.l	#0x00020708, (%a1)+	/* 0x50 */
+	move.l	#0x00050008, (%a1)+	/* 0x54 */
+	move.l	#0x04030002, (%a1)+	/* 0x58 */
+	move.l	#0x00000004, (%a1)+	/* 0x5C */
+	move.l	#0x020A0000, (%a1)+	/* 0x60 */
+	move.l	#0x0C00000E, (%a1)+	/* 0x64 */
+	move.l	#0x00002004, (%a1)+	/* 0x68 */
+	move.l	#0x00000000, (%a1)+	/* 0x6C */
+	move.l	#0x00100010, (%a1)+	/* 0x70 */
+	move.l	#0x00100010, (%a1)+	/* 0x74 */
+	move.l	#0x00000000, (%a1)+	/* 0x78 */
+	move.l	#0x07990000, (%a1)+	/* 0x7C */
+	move.l	#0xFC0B80A0, %a1
+	move.l	#0x00000000, (%a1)+	/* 0xA0 */
+	move.l	#0x00C80064, (%a1)+	/* 0xA4 */
+	move.l	#0x44520002, (%a1)+	/* 0xA8 */
+	move.l	#0x00C80023, (%a1)+	/* 0xAC */
+	move.l	#0xFC0B80B4, %a1
+	move.l	#0x0000C350, (%a1)	/* 0xB4 */
+	move.l	#0xFC0B80E0, %a1
+	move.l	#0x04000000, (%a1)+	/* 0xE0 */
+	move.l	#0x03000304, (%a1)+	/* 0xE4 */
+	move.l	#0x40040000, (%a1)+	/* 0xE8 */
+	move.l	#0xC0004004, (%a1)+	/* 0xEC */
+	move.l	#0x0642C000, (%a1)+	/* 0xF0 */
+	move.l	#0x00000642, (%a1)+	/* 0xF4 */
+	move.l	#0xFC0B8024, %a1
+	tpf
+	move.l	#0x01000100, (%a1)	/* 0x24 */
+
+	move.l	#0x2000, %d1
+	jsr	asm_delay
+#endif		/* CONFIG_MCF5441x */
+
+#ifdef CONFIG_MCF5445x
 	/* Dram Initialization a1, a2, and d0 */
 	/* mscr sdram */
 	move.l	#0xFC0A4074, %a1
@@ -203,7 +307,9 @@
 	add.l	#1, %d1
 	cmp.l	#1, %d2
 	bne	dramsz_loop
-
+#ifdef CONFIG_SYS_NAND_BOOT
+	beq	asm_nand_chk_status
+#endif
 	/* SDRAM Chip 0 and 1 */
 	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
 	or.l	%d1, (%a1)
@@ -275,7 +381,9 @@
 
 	move.l	#2000, %d1
 	jsr	asm_delay
+#endif		/* CONFIG_MCF5445x */
 
+#ifdef CONFIG_CF_SBF
 	/*
 	 * DSPI Initialization
 	 * a0 - general, sram - 0x80008000 - 32, see M54455EVB.h
@@ -286,15 +394,28 @@
 	 */
 	/* Enable pins for DSPI mode - chip-selects are enabled later */
 asm_dspi_init:
+#ifdef CONFIG_MCF5441x
+	move.l	#0xEC09404E, %a1
+	move.l	#0xEC09404F, %a2
+	move.b	#0xFF, (%a1)
+	move.b	#0x80, (%a2)
+#endif
+
+#ifdef CONFIG_MCF5445x
 	move.l	#0xFC0A4063, %a0
 	move.b	#0x7F, (%a0)
-
+#endif
 	/* Configure DSPI module */
 	move.l	#0xFC05C000, %a0
 	move.l	#0x80FF0C00, (%a0)	/* Master, clear TX/RX FIFO */
 
 	move.l	#0xFC05C00C, %a0
+#ifdef CONFIG_MCF5441x
+	move.l	#0x3E000016, (%a0)
+#endif
+#ifdef CONFIG_MCF5445x
 	move.l	#0x3E000011, (%a0)
+#endif
 
 	move.l	#0xFC05C034, %a2	/* dtfr */
 	move.l	#0xFC05C03B, %a3	/* drfr */
@@ -379,19 +500,148 @@
 
 	move.b	(%a3), %d1
 	rts
+#endif			/* CONFIG_CF_SBF */
+
+#ifdef CONFIG_SYS_NAND_BOOT
+	/* copy 4 boot pages to dram as soon as possible */
+	/* each page is 996 bytes (1056 total with 60 ECC bytes */
+	move.l  #0x00000000, %a1	/* src */
+	move.l	#TEXT_BASE, %a2		/* dst */
+	move.l	#0x3E0, %d0		/* sz in long */
+
+asm_boot_nand_copy:
+	move.l	(%a1)+, (%a2)+
+	subq.l	#1, %d0
+	bne	asm_boot_nand_copy
+
+	/* jump to memory and execute */
+	move.l	#(asm_nand_init), %a0
+	jmp	(%a0)
+
+asm_nand_init:
+	/* exit nand boot-mode */
+	move.l	#0xFC0FFF30, %a1
+	or.l	#0x00000040, %d1
+	move.l	%d1, (%a1)
+
+	/* initialize general use internal ram */
+	move.l #0, %d0
+	move.l #(CACR_STATUS), %a1	/* CACR */
+	move.l #(ICACHE_STATUS), %a2	/* icache */
+	move.l #(DCACHE_STATUS), %a3	/* dcache */
+	move.l %d0, (%a1)
+	move.l %d0, (%a2)
+	move.l %d0, (%a3)
+
+	/* invalidate and disable cache */
+	move.l	#0x01004100, %d0	/* Invalidate cache cmd */
+	movec	%d0, %CACR		/* Invalidate cache */
+	move.l	#0, %d0
+	movec	%d0, %ACR0
+	movec	%d0, %ACR1
+	movec	%d0, %ACR2
+	movec	%d0, %ACR3
+
+	/* Must disable global address */
+	move.l	#0xFC008000, %a1
+	move.l	#(CONFIG_SYS_CS0_BASE), (%a1)
+	move.l	#0xFC008008, %a1
+	move.l	#(CONFIG_SYS_CS0_CTRL), (%a1)
+	move.l	#0xFC008004, %a1
+	move.l	#(CONFIG_SYS_CS0_MASK), (%a1)
+
+	/* NAND port configuration */
+	move.l	#0xEC094048, %a1
+	move.b	#0xFD, (%a1)+
+	move.b	#0x5F, (%a1)+
+	move.b	#0x04, (%a1)+
+
+	/* reset nand */
+	move.l  #0xFC0FFF38, %a1	/* isr */
+	move.l  #0x000e0000, (%a1)
+	move.l	#0xFC0FFF08, %a2
+	move.l	#0x00000000, (%a2)+	/* car */
+	move.l	#0x11000000, (%a2)+	/* rar */
+	move.l	#0x00000000, (%a2)+	/* rpt */
+	move.l	#0x00000000, (%a2)+	/* rai */
+	move.l  #0xFC0FFF2c, %a2	/* cfg */
+	move.l  #0x00000000, (%a2)+	/* secsz */
+	move.l  #0x000e0681, (%a2)+
+	move.l  #0xFC0FFF04, %a2	/* cmd2 */
+	move.l  #0xFF404001, (%a2)
+	move.l  #0x000e0000, (%a1)
+
+	move.l	#0x2000, %d1
+	jsr	asm_delay
+
+	/* setup nand */
+	move.l  #0xFC0FFF00, %a1
+	move.l  #0x30700000, (%a1)+	/* cmd1 */
+	move.l  #0x007EF000, (%a1)+	/* cmd2 */
+
+	move.l  #0xFC0FFF2C, %a1
+	move.l  #0x00000841, (%a1)+	/* secsz */
+	move.l  #0x000e0681, (%a1)+	/* cfg */
+
+	move.l	#100, %d4		/* 100 pages ~200KB */
+	move.l	#4, %d2			/* start at 4 */
+	move.l  #0xFC0FFF04, %a0	/* cmd2 */
+	move.l  #0xFC0FFF0C, %a1	/* rar */
+	move.l	#(TEXT_BASE + 0xF80), %a2	/* dst */
+
+asm_nand_read:
+	move.l	#0x11000000, %d0	/* rar */
+	or.l	%d2, %d0
+	move.l	%d0, (%a1)
+	add.l	#1, %d2
+
+	move.l	(%a0), %d0		/* cmd2 */
+	or.l	#1, %d0
+	move.l	%d0, (%a0)
+
+	move.l	#0x200, %d1
+	jsr	asm_delay
+
+asm_nand_chk_status:
+	move.l  #0xFC0FFF38, %a4	/* isr */
+	move.l	(%a4), %d0
+	and.l	#0x40000000, %d0
+	tst.l	%d0
+	beq	asm_nand_chk_status
+
+	move.l  #0xFC0FFF38, %a4	/* isr */
+	move.l	(%a4), %d0
+	or.l	#0x000E0000, %d0
+	move.l	%d0, (%a4)
+
+	move.l	#0x200, %d3
+	move.l	#0xFC0FC000, %a3	/* buf 1 */
+asm_nand_copy:
+	move.l	(%a3)+, (%a2)+
+	subq.l	#1, %d3
+	bgt	asm_nand_copy
+
+	subq.l	#1, %d4
+	bgt	asm_nand_read
+
+	/* jump to memory and execute */
+	move.l	#(TEXT_BASE + 0x400), %a0
+	jmp	(%a0)
+
+#endif			/* CONFIG_SYS_NAND_BOOT */
 
 asm_delay:
 	nop
 	subq.l	#1, %d1
 	bne	asm_delay
 	rts
-#endif			/* CONFIG_CF_SBF */
+#endif			/* CONFIG_CF_SBF || CONFIG_NAND_U_BOOT */
 
 	.text
 	. = 0x400
 	.globl	_start
 _start:
-#if !defined(CONFIG_CF_SBF)
+#if !defined(CONFIG_SERIAL_BOOT)
 	nop
 	nop
 	move.w #0x2700,%sr		/* Mask off Interrupt */
@@ -418,12 +668,15 @@
 	movec	%d0, %ACR1
 	movec	%d0, %ACR2
 	movec	%d0, %ACR3
+#else
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
+	movec	%d0, %RAMBAR1
+#endif
 
 	/* set stackpointer to end of internal ram to get some stackspace for
 	   the first c-code */
 	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
 	clr.l %sp@-
-#endif
 
 	move.l #__got_start, %a5	/* put relocation table address to a5 */
 
diff --git a/arch/m68k/cpu/mcf547x_8x/start.S b/arch/m68k/cpu/mcf547x_8x/start.S
index ec65cae..d99747b 100644
--- a/arch/m68k/cpu/mcf547x_8x/start.S
+++ b/arch/m68k/cpu/mcf547x_8x/start.S
@@ -164,8 +164,8 @@
 
 	move.l #__got_start, %a5	/* put relocation table address to a5 */
 
-	bsr cpu_init_f			/* run low-level CPU init code (from flash) */
-	bsr board_init_f		/* run low-level board init code (from flash) */
+	jbsr cpu_init_f			/* run low-level CPU init code (from flash) */
+	jbsr board_init_f		/* run low-level board init code (from flash) */
 
 	/* board_init_f() does not return */
 
diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h
index 5c9bb30..f9e2d15 100644
--- a/arch/m68k/include/asm/cache.h
+++ b/arch/m68k/include/asm/cache.h
@@ -1,7 +1,7 @@
 /*
  * ColdFire cache
  *
- * Copyright (C) 2004-2010 Freescale Semiconductor, Inc.
+ * Copyright 2004-2012 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -37,10 +37,9 @@
 
 #if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x)
 #define CONFIG_CF_V4
-#if defined(CONFIG_MCF5441x)
+#elif defined(CONFIG_MCF5441x)
 #define CONFIG_CF_V4E		/* Four Extra ACRn */
 #endif
-#endif
 
 /* ***** CACR ***** */
 /* V2 Core */
@@ -87,7 +86,7 @@
 #endif				/* CONFIG_CF_V3 */
 
 /* V4 Core */
-#ifdef CONFIG_CF_V4
+#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E)
 
 #define CF_CACR_DEC		(1 << 31)
 #define CF_CACR_DW		(1 << 30)
@@ -113,7 +112,7 @@
 #define CF_CACR_IDSP		(1 << 7)
 #define CF_CACR_EUSP		(1 << 5)
 
-#ifdef CONFIG_MCF5445x
+#if defined(CONFIG_MCF5445x) || defined(CONFIG_MCF5441x)
 #define CF_CACR_IVO		(1 << 20)
 #define CF_CACR_SPA		(1 << 14)
 #else
@@ -148,7 +147,7 @@
 #endif				/* CONFIG_CF_V2 */
 
 /* V4 Core */
-#ifdef CONFIG_CF_V4
+#if defined(CONFIG_CF_V4) || defined(CONFIG_CF_V4E)
 #define CF_ACR_AMM		(1 << 10)
 #define CF_ACR_SP		(1 << 3)
 #endif				/* CONFIG_CF_V4 */
diff --git a/arch/m68k/include/asm/global_data.h b/arch/m68k/include/asm/global_data.h
index cd55b83..0cdb11c 100644
--- a/arch/m68k/include/asm/global_data.h
+++ b/arch/m68k/include/asm/global_data.h
@@ -34,7 +34,7 @@
 typedef	struct	global_data {
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
 	unsigned long	bus_clk;
 #ifdef CONFIG_PCI
diff --git a/arch/m68k/include/asm/immap.h b/arch/m68k/include/asm/immap.h
index e83ce08..2aab463 100644
--- a/arch/m68k/include/asm/immap.h
+++ b/arch/m68k/include/asm/immap.h
@@ -1,7 +1,7 @@
 /*
  * ColdFire Internal Memory Map and Defines
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright 2004-2012 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -318,6 +318,47 @@
 #define CONFIG_SYS_NUM_IRQS		(128)
 #endif				/* CONFIG_M5329 && CONFIG_M5373 */
 
+#if defined(CONFIG_M54418)
+#include <asm/immap_5441x.h>
+#include <asm/m5441x.h>
+
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC0)
+#define CONFIG_SYS_FEC1_IOBASE		(MMAP_FEC1)
+
+#if (CONFIG_SYS_UART_PORT < 4)
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + \
+					(CONFIG_SYS_UART_PORT * 0x4000))
+#else
+#define CONFIG_SYS_UART_BASE		(MMAP_UART4 + \
+					((CONFIG_SYS_UART_PORT - 4) * 0x4000))
+#endif
+
+#define MMAP_DSPI			MMAP_DSPI0
+#define CONFIG_SYS_MCFRTC_BASE		(MMAP_RTC)
+
+/* Timer */
+#ifdef CONFIG_MCFTMR
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
+#define CONFIG_SYS_TMRPND_REG	(((int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_DTMR1)
+#define CONFIG_SYS_TMRINTR_MASK		(INTC_IPRH_INT33)
+#define CONFIG_SYS_TMRINTR_PEND		(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(6)
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#endif
+
+#ifdef CONFIG_MCFPIT
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_PIT0)
+#define CONFIG_SYS_PIT_BASE		(MMAP_PIT1)
+#define CONFIG_SYS_PIT_PRESCALE	(6)
+#endif
+
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
+
+#endif				/* CONFIG_M54418 */
+
 #if defined(CONFIG_M54451) || defined(CONFIG_M54455)
 #include <asm/immap_5445x.h>
 #include <asm/m5445x.h>
diff --git a/arch/m68k/include/asm/immap_5441x.h b/arch/m68k/include/asm/immap_5441x.h
new file mode 100644
index 0000000..300f4d2
--- /dev/null
+++ b/arch/m68k/include/asm/immap_5441x.h
@@ -0,0 +1,387 @@
+/*
+ * MCF5441x Internal Memory Map
+ *
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_5441X__
+#define __IMMAP_5441X__
+
+/* Module Base Addresses */
+#define MMAP_XBS	0xFC004000
+#define MMAP_FBCS	0xFC008000
+#define MMAP_CAN0	0xFC020000
+#define MMAP_CAN1	0xFC024000
+#define MMAP_I2C1	0xFC038000
+#define MMAP_DSPI1	0xFC03C000
+#define MMAP_SCM	0xFC040000
+#define MMAP_PM		0xFC04002C
+#define MMAP_EDMA	0xFC044000
+#define MMAP_INTC0	0xFC048000
+#define MMAP_INTC1	0xFC04C000
+#define MMAP_INTC2	0xFC050000
+#define MMAP_IACK	0xFC054000
+#define MMAP_I2C0	0xFC058000
+#define MMAP_DSPI0	0xFC05C000
+#define MMAP_UART0	0xFC060000
+#define MMAP_UART1	0xFC064000
+#define MMAP_UART2	0xFC068000
+#define MMAP_UART3	0xFC06C000
+#define MMAP_DTMR0	0xFC070000
+#define MMAP_DTMR1	0xFC074000
+#define MMAP_DTMR2	0xFC078000
+#define MMAP_DTMR3	0xFC07C000
+#define MMAP_PIT0	0xFC080000
+#define MMAP_PIT1	0xFC084000
+#define MMAP_PIT2	0xFC088000
+#define MMAP_PIT3	0xFC08C000
+#define MMAP_EPORT0	0xFC090000
+#define MMAP_ADC	0xFC094000
+#define MMAP_DAC0	0xFC098000
+#define MMAP_DAC1	0xFC09C000
+#define MMAP_RRTC	0xFC0A8000
+#define MMAP_SIM	0xFC0AC000
+#define MMAP_USBOTG	0xFC0B0000
+#define MMAP_USBEHCI	0xFC0B4000
+#define MMAP_SDRAM	0xFC0B8000
+#define MMAP_SSI0	0xFC0BC000
+#define MMAP_PLL	0xFC0C0000
+#define MMAP_RNG	0xFC0C4000
+#define MMAP_SSI1	0xFC0C8000
+#define MMAP_ESDHC	0xFC0CC000
+#define MMAP_FEC0	0xFC0D4000
+#define MMAP_FEC1	0xFC0D8000
+#define MMAP_L2_SW0	0xFC0DC000
+#define MMAP_L2_SW1	0xFC0E0000
+
+#define MMAP_NFC_RAM	0xFC0FC000
+#define MMAP_NFC	0xFC0FF000
+
+#define MMAP_1WIRE	0xEC008000
+#define MMAP_I2C2	0xEC010000
+#define MMAP_I2C3	0xEC014000
+#define MMAP_I2C4	0xEC018000
+#define MMAP_I2C5	0xEC01C000
+#define MMAP_DSPI2	0xEC038000
+#define MMAP_DSPI3	0xEC03C000
+#define MMAP_UART4	0xEC060000
+#define MMAP_UART5	0xEC064000
+#define MMAP_UART6	0xEC068000
+#define MMAP_UART7	0xEC06C000
+#define MMAP_UART8	0xEC070000
+#define MMAP_UART9	0xEC074000
+#define MMAP_RCM	0xEC090000
+#define MMAP_CCM	0xEC090000
+#define MMAP_GPIO	0xEC094000
+
+#include <asm/coldfire/crossbar.h>
+#include <asm/coldfire/dspi.h>
+#include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/ssi.h>
+
+/* Serial Boot Facility (SBF) */
+typedef struct sbf {
+	u8 resv0[0x18];
+	u16 sbfsr;		/* Serial Boot Facility Status */
+	u8 resv1[0x6];
+	u16 sbfcr;		/* Serial Boot Facility Control */
+} sbf_t;
+
+/* Reset Controller Module (RCM) */
+typedef struct rcm {
+	u8 rcr;
+	u8 rsr;
+} rcm_t;
+
+/* Chip Configuration Module (CCM) */
+typedef struct ccm {
+	u8 ccm_resv0[0x4];	/* 0x00 */
+	u16 ccr;		/* 0x04 Chip Configuration */
+	u8 resv1[0x2];		/* 0x06 */
+	u16 rcon;		/* 0x08 Reset Configuration */
+	u16 cir;		/* 0x0A Chip Identification */
+	u8 resv2[0x2];		/* 0x0C */
+	u16 misccr;		/* 0x0E Miscellaneous Control */
+	u16 cdrh;		/* 0x10 Clock Divider */
+	u16 cdrl;		/* 0x12 Clock Divider */
+	u16 uocsr;		/* 0x14 USB On-the-Go Controller Status */
+	u16 uhcsr;		/* 0x16 */
+	u16 misccr3;		/* 0x18 */
+	u16 misccr2;		/* 0x1A */
+	u16 adctsr;		/* 0x1C */
+	u16 dactsr;		/* 0x1E */
+	u16 sbfsr;		/* 0x20 */
+	u16 sbfcr;		/* 0x22 */
+	u32 fnacr;		/* 0x24 */
+} ccm_t;
+
+/* General Purpose I/O Module (GPIO) */
+typedef struct gpio {
+	u8 podr_a;		/* 0x00 */
+	u8 podr_b;		/* 0x01 */
+	u8 podr_c;		/* 0x02 */
+	u8 podr_d;		/* 0x03 */
+	u8 podr_e;		/* 0x04 */
+	u8 podr_f;		/* 0x05 */
+	u8 podr_g;		/* 0x06 */
+	u8 podr_h;		/* 0x07 */
+	u8 podr_i;		/* 0x08 */
+	u8 podr_j;		/* 0x09 */
+	u8 podr_k;		/* 0x0A */
+	u8 rsvd0;		/* 0x0B */
+
+	u8 pddr_a;		/* 0x0C */
+	u8 pddr_b;		/* 0x0D */
+	u8 pddr_c;		/* 0x0E */
+	u8 pddr_d;		/* 0x0F */
+	u8 pddr_e;		/* 0x10 */
+	u8 pddr_f;		/* 0x11 */
+	u8 pddr_g;		/* 0x12 */
+	u8 pddr_h;		/* 0x13 */
+	u8 pddr_i;		/* 0x14 */
+	u8 pddr_j;		/* 0x15 */
+	u8 pddr_k;		/* 0x16 */
+	u8 rsvd1;		/* 0x17 */
+
+	u8 ppdsdr_a;		/* 0x18 */
+	u8 ppdsdr_b;		/* 0x19 */
+	u8 ppdsdr_c;		/* 0x1A */
+	u8 ppdsdr_d;		/* 0x1B */
+	u8 ppdsdr_e;		/* 0x1C */
+	u8 ppdsdr_f;		/* 0x1D */
+	u8 ppdsdr_g;		/* 0x1E */
+	u8 ppdsdr_h;		/* 0x1F */
+	u8 ppdsdr_i;		/* 0x20 */
+	u8 ppdsdr_j;		/* 0x21 */
+	u8 ppdsdr_k;		/* 0x22 */
+	u8 rsvd2;		/* 0x23 */
+
+	u8 pclrr_a;		/* 0x24 */
+	u8 pclrr_b;		/* 0x25 */
+	u8 pclrr_c;		/* 0x26 */
+	u8 pclrr_d;		/* 0x27 */
+	u8 pclrr_e;		/* 0x28 */
+	u8 pclrr_f;		/* 0x29 */
+	u8 pclrr_g;		/* 0x2A */
+	u8 pclrr_h;		/* 0x2B */
+	u8 pclrr_i;		/* 0x2C */
+	u8 pclrr_j;		/* 0x2D */
+	u8 pclrr_k;		/* 0x2E */
+	u8 rsvd3;		/* 0x2F */
+
+	u16 pcr_a;		/* 0x30 */
+	u16 pcr_b;		/* 0x32 */
+	u16 pcr_c;		/* 0x34 */
+	u16 pcr_d;		/* 0x36 */
+	u16 pcr_e;		/* 0x38 */
+	u16 pcr_f;		/* 0x3A */
+	u16 pcr_g;		/* 0x3C */
+	u16 pcr_h;		/* 0x3E */
+	u16 pcr_i;		/* 0x40 */
+	u16 pcr_j;		/* 0x42 */
+	u16 pcr_k;		/* 0x44 */
+	u16 rsvd4;		/* 0x46 */
+
+	u8 par_fbctl;		/* 0x48 */
+	u8 par_be;		/* 0x49 */
+	u8 par_cs;		/* 0x4A */
+	u8 par_cani2c;		/* 0x4B */
+	u8 par_irqh;		/* 0x4C */
+	u8 par_irql;		/* 0x4D */
+	u8 par_dspi0;		/* 0x4E */
+	u8 par_dspiow;		/* 0x4F */
+	u8 par_timer;		/* 0x50 */
+	u8 par_uart2;		/* 0x51 */
+	u8 par_uart1;		/* 0x52 */
+	u8 par_uart0;		/* 0x53 */
+	u8 par_sdhch;		/* 0x54 */
+	u8 par_sdhcl;		/* 0x55 */
+	u8 par_simp0h;		/* 0x56 */
+	u8 par_simp1h;		/* 0x57 */
+	u8 par_ssi0h;		/* 0x58 */
+	u8 par_ssi0l;		/* 0x59 */
+	u8 par_dbg1h;		/* 0x5A */
+	u8 par_dbg0h;		/* 0x5B */
+	u8 par_dbgl;		/* 0x5C */
+	u8 rsvd5;		/* 0x5D */
+	u8 par_fec;		/* 0x5E */
+	u8 rsvd6;		/* 0x5F */
+
+	u8 mscr_sdram;		/* 0x60 */
+	u8 rsvd7[3];		/* 0x61-0x63 */
+
+	u8 srcr_fb1;		/* 0x64 */
+	u8 srcr_fb2;		/* 0x65 */
+	u8 srcr_fb3;		/* 0x66 */
+	u8 srcr_fb4;		/* 0x67 */
+	u8 srcr_dspiow;		/* 0x68 */
+	u8 srcr_cani2c;		/* 0x69 */
+	u8 srcr_irq;		/* 0x6A */
+	u8 srcr_timer;		/* 0x6B */
+	u8 srcr_uart;		/* 0x6C */
+	u8 srcr_fec;		/* 0x6D */
+	u8 srcr_sdhc;		/* 0x6E */
+	u8 srcr_simp0;		/* 0x6F */
+	u8 srcr_ssi0;		/* 0x70 */
+	u8 rsvd8[3];		/* 0x71-0x73 */
+
+	u16 urts_pol;		/* 0x74 */
+	u16 ucts_pol;		/* 0x76 */
+	u16 utxd_wom;		/* 0x78 */
+	u32 urxd_wom;		/* 0x7c */
+
+	u32 hcr1;		/* 0x80 */
+	u32 hcr0;		/* 0x84 */
+} gpio_t;
+
+/* SDRAM Controller (SDRAMC) */
+typedef struct sdramc {
+	u32 cr00;		/* 0x00 */
+	u32 cr01;		/* 0x04 */
+	u32 cr02;		/* 0x08 */
+	u32 cr03;		/* 0x0C */
+	u32 cr04;		/* 0x10 */
+	u32 cr05;		/* 0x14 */
+	u32 cr06;		/* 0x18 */
+	u32 cr07;		/* 0x1C */
+
+	u32 cr08;		/* 0x20 */
+	u32 cr09;		/* 0x24 */
+	u32 cr10;		/* 0x28 */
+	u32 cr11;		/* 0x2C */
+	u32 cr12;		/* 0x30 */
+	u32 cr13;		/* 0x34 */
+	u32 cr14;		/* 0x38 */
+	u32 cr15;		/* 0x3C */
+
+	u32 cr16;		/* 0x40 */
+	u32 cr17;		/* 0x44 */
+	u32 cr18;		/* 0x48 */
+	u32 cr19;		/* 0x4C */
+	u32 cr20;		/* 0x50 */
+	u32 cr21;		/* 0x54 */
+	u32 cr22;		/* 0x58 */
+	u32 cr23;		/* 0x5C */
+
+	u32 cr24;		/* 0x60 */
+	u32 cr25;		/* 0x64 */
+	u32 cr26;		/* 0x68 */
+	u32 cr27;		/* 0x6C */
+	u32 cr28;		/* 0x70 */
+	u32 cr29;		/* 0x74 */
+	u32 cr30;		/* 0x78 */
+	u32 cr31;		/* 0x7C */
+
+	u32 cr32;		/* 0x80 */
+	u32 cr33;		/* 0x84 */
+	u32 cr34;		/* 0x88 */
+	u32 cr35;		/* 0x8C */
+	u32 cr36;		/* 0x90 */
+	u32 cr37;		/* 0x94 */
+	u32 cr38;		/* 0x98 */
+	u32 cr39;		/* 0x9C */
+
+	u32 cr40;		/* 0xA0 */
+	u32 cr41;		/* 0xA4 */
+	u32 cr42;		/* 0xA8 */
+	u32 cr43;		/* 0xAC */
+	u32 cr44;		/* 0xB0 */
+	u32 cr45;		/* 0xB4 */
+	u32 cr46;		/* 0xB8 */
+	u32 cr47;		/* 0xBC */
+	u32 cr48;		/* 0xC0 */
+	u32 cr49;		/* 0xC4 */
+	u32 cr50;		/* 0xC8 */
+	u32 cr51;		/* 0xCC */
+	u32 cr52;		/* 0xD0 */
+	u32 cr53;		/* 0xD4 */
+	u32 cr54;		/* 0xD8 */
+	u32 cr55;		/* 0xDC */
+	u32 cr56;		/* 0xE0 */
+	u32 cr57;		/* 0xE4 */
+	u32 cr58;		/* 0xE8 */
+	u32 cr59;		/* 0xEC */
+	u32 cr60;		/* 0xF0 */
+	u32 cr61;		/* 0xF4 */
+	u32 cr62;		/* 0xF8 */
+	u32 cr63;		/* 0xFC */
+
+	u32 rsvd3[32];		/* 0xF4-0x1A8 */
+
+	u32 rcrcr;		/* 0x180 */
+	u32 swrcr;		/* 0x184 */
+	u32 rcr;		/* 0x188 */
+	u32 msovr;		/* 0x18C */
+	u32 rcrdbg;		/* 0x190 */
+	u32 sl0adj;		/* 0x194 */
+	u32 sl1adj;		/* 0x198 */
+	u32 sl2adj;		/* 0x19C */
+	u32 sl3adj;		/* 0x1A0 */
+	u32 sl4adj;		/* 0x1A4 */
+	u32 flight_tm;		/* 0x1A8 */
+	u32 padcr;		/* 0x1AC */
+} sdramc_t;
+
+/* Phase Locked Loop (PLL) */
+typedef struct pll {
+	u32 pcr;		/* Control */
+	u32 pdr;		/* Divider */
+	u32 psr;		/* Status */
+} pll_t;
+
+typedef struct scm {
+	u8 rsvd1[19];		/* 0x00 - 0x12 */
+	u8 wcr;			/* 0x13 */
+	u16 rsvd2;		/* 0x14 - 0x15 */
+	u16 cwcr;		/* 0x16 */
+	u8 rsvd3[3];		/* 0x18 - 0x1A */
+	u8 cwsr;		/* 0x1B */
+	u8 rsvd4[3];		/* 0x1C - 0x1E */
+	u8 scmisr;		/* 0x1F */
+	u32 rsvd5;		/* 0x20 - 0x23 */
+	u32 bcr;		/* 0x24 */
+	u8 rsvd6[72];		/* 0x28 - 0x6F */
+	u32 cfadr;		/* 0x70 */
+	u8 rsvd7;		/* 0x74 */
+	u8 cfier;		/* 0x75 */
+	u8 cfloc;		/* 0x76 */
+	u8 cfatr;		/* 0x77 */
+	u32 rsvd8;		/* 0x78 - 0x7B */
+	u32 cfdtr;		/* 0x7C */
+} scm_t;
+
+typedef struct pm {
+	u8 pmsr0;		/* */
+	u8 pmcr0;
+	u8 pmsr1;
+	u8 pmcr1;
+	u32 pmhr0;
+	u32 pmlr0;
+	u32 pmhr1;
+	u32 pmlr1;
+} pm_t;
+
+#endif				/* __IMMAP_5441X__ */
diff --git a/arch/m68k/include/asm/m5441x.h b/arch/m68k/include/asm/m5441x.h
new file mode 100644
index 0000000..f5c82d4
--- /dev/null
+++ b/arch/m68k/include/asm/m5441x.h
@@ -0,0 +1,887 @@
+/*
+ * MCF5441X Internal Memory Map
+ *
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MCF5441X__
+#define __MCF5441X__
+
+/* Interrupt Controller (INTC) */
+#define INT0_LO_RSVD0			(0)
+#define INT0_LO_EPORT1			(1)
+#define INT0_LO_EPORT2			(2)
+#define INT0_LO_EPORT3			(3)
+#define INT0_LO_EPORT4			(4)
+#define INT0_LO_EPORT5			(5)
+#define INT0_LO_EPORT6			(6)
+#define INT0_LO_EPORT7			(7)
+#define INT0_LO_EDMA_00		(8)
+#define INT0_LO_EDMA_01		(9)
+#define INT0_LO_EDMA_02		(10)
+#define INT0_LO_EDMA_03		(11)
+#define INT0_LO_EDMA_04		(12)
+#define INT0_LO_EDMA_05		(13)
+#define INT0_LO_EDMA_06		(14)
+#define INT0_LO_EDMA_07		(15)
+#define INT0_LO_EDMA_08		(16)
+#define INT0_LO_EDMA_09		(17)
+#define INT0_LO_EDMA_10		(18)
+#define INT0_LO_EDMA_11		(19)
+#define INT0_LO_EDMA_12		(20)
+#define INT0_LO_EDMA_13		(21)
+#define INT0_LO_EDMA_14		(22)
+#define INT0_LO_EDMA_15		(23)
+#define INT0_LO_EDMA_ERR		(24)
+#define INT0_LO_SCM			(25)
+#define INT0_LO_UART0			(26)
+#define INT0_LO_UART1			(27)
+#define INT0_LO_UART2			(28)
+#define INT0_LO_UART3			(29)
+#define INT0_LO_I2C0			(30)
+#define INT0_LO_DSPI0			(31)
+#define INT0_HI_DTMR0			(32)
+#define INT0_HI_DTMR1			(33)
+#define INT0_HI_DTMR2			(34)
+#define INT0_HI_DTMR3			(35)
+#define INT0_HI_MACNET0_TXF		(36)
+#define INT0_HI_MACNET0_TXB		(37)
+#define INT0_HI_MACNET0_UN		(38)
+#define INT0_HI_MACNET0_RL		(39)
+#define INT0_HI_MACNET0_RXF		(40)
+#define INT0_HI_MACNET0_RXB		(41)
+#define INT0_HI_MACNET0_MII		(42)
+#define INT0_HI_MACNET0_LC		(43)
+/* not used 44 */
+#define INT0_HI_MACNET0_GRA		(45)
+#define INT0_HI_MACNET0_EBERR		(46)
+#define INT0_HI_MACNET0_BABT		(47)
+#define INT0_HI_MACNET0_BABR		(48)
+#define INT0_HI_MACNET1_TXF		(49)
+#define INT0_HI_MACNET1_TXB		(50)
+#define INT0_HI_MACNET1_UN		(51)
+#define INT0_HI_MACNET1_RL		(52)
+#define INT0_HI_MACNET1_RXF		(53)
+#define INT0_HI_MACNET1_RXB		(54)
+#define INT0_HI_MACNET1_MII		(55)
+#define INT0_HI_MACNET1_LC		(56)
+/* not used 57 */
+#define INT0_HI_MACNET1_GRA		(58)
+#define INT0_HI_MACNET1_EBERR		(59)
+#define INT0_HI_MACNET1_BABT		(60)
+#define INT0_HI_MACNET1_BABR		(61)
+#define INT0_HI_SCMIR			(62)
+#define INT0_HI_OW			(63)
+
+#define INT1_LO_CAN0_IFG		(0)
+#define INT1_LO_CAN0_BOFF		(1)
+/* not used 2 */
+#define INT1_LO_CAN0_TXRXWRN		(3)
+#define INT1_LO_CAN1_IFG		(4)
+#define INT1_LO_CAN1_BOFF		(5)
+/* not used 6 */
+#define INT1_LO_CAN1_TXRXWRN		(7)
+#define INT1_LO_EDMA_16		(8)
+#define INT1_LO_EDMA_17		(9)
+#define INT1_LO_EDMA_18		(10)
+#define INT1_LO_EDMA_19		(11)
+#define INT1_LO_EDMA_20		(12)
+#define INT1_LO_EDMA_21		(13)
+#define INT1_LO_EDMA_22		(14)
+#define INT1_LO_EDMA_23		(15)
+#define INT1_LO_EDMA_24		(16)
+#define INT1_LO_EDMA_25		(17)
+#define INT1_LO_EDMA_26		(18)
+#define INT1_LO_EDMA_27		(19)
+#define INT1_LO_EDMA_28		(20)
+#define INT1_LO_EDMA_29		(21)
+#define INT1_LO_EDMA_30		(22)
+#define INT1_LO_EDMA_31		(23)
+#define INT1_LO_EDMA_32		(24)
+#define INT1_LO_EDMA_33		(25)
+#define INT1_LO_EDMA_34		(26)
+#define INT1_LO_EDMA_35		(27)
+#define INT1_LO_EDMA_36		(28)
+#define INT1_LO_EDMA_37		(29)
+#define INT1_LO_EDMA_38		(30)
+#define INT1_LO_EDMA_39		(31)
+#define INT1_LO_EDMA_40		(32)
+#define INT1_HI_EDMA_41		(33)
+#define INT1_HI_EDMA_42		(34)
+#define INT1_HI_EDMA_43		(35)
+#define INT1_HI_EDMA_44		(36)
+#define INT1_HI_EDMA_45		(37)
+#define INT1_HI_EDMA_46		(38)
+#define INT1_HI_EDMA_47		(39)
+#define INT1_HI_EDMA_48		(40)
+#define INT1_HI_EDMA_49		(41)
+#define INT1_HI_EDMA_50		(42)
+#define INT1_HI_EDMA_51		(43)
+#define INT1_HI_EDMA_52		(44)
+#define INT1_HI_EDMA_53		(45)
+#define INT1_HI_EDMA_54		(46)
+#define INT1_HI_EDMA_55		(47)
+#define INT1_HI_UART4			(48)
+#define INT1_HI_UART5			(49)
+#define INT1_HI_UART6			(50)
+#define INT1_HI_UART7			(51)
+#define INT1_HI_UART8			(52)
+#define INT1_HI_UART9			(53)
+#define INT1_HI_DSPI1			(54)
+#define INT1_HI_DSPI2			(55)
+#define INT1_HI_DSPI3			(56)
+#define INT1_HI_I2C1			(57)
+#define INT1_HI_I2C2			(58)
+#define INT1_HI_I2C3			(59)
+#define INT1_HI_I2C4			(60)
+#define INT1_HI_I2C5			(61)
+
+#define INT2_LO_EDMA56_63		(0)
+#define INT2_LO_PWM_SM0SR_CF		(1)
+#define INT2_LO_PWM_SM1SR_CF		(2)
+#define INT2_LO_PWM_SM2SR_CF		(3)
+#define INT2_LO_PWM_SM3SR_CF		(4)
+#define INT2_LO_PWM_SM0SR_RF		(5)
+#define INT2_LO_PWM_SM1SR_RF		(6)
+#define INT2_LO_PWM_SM2SR_RF		(7)
+#define INT2_LO_PWM_SM3SR_RF		(8)
+#define INT2_LO_PWM_FSR		(9)
+#define INT2_LO_PWM_SMSR_REF		(10)
+#define INT2_LO_PLL_SR_LOCF		(11)
+#define INT2_LO_PLL_SR_LOLF		(12)
+#define INT2_LO_PIT0_PIF		(13)
+#define INT2_LO_PIT1_PIF		(14)
+#define INT2_LO_PIT2_PIF		(15)
+#define INT2_LO_PIT3_PIF		(16)
+#define INT2_LO_USBOTG_USBSTS		(17)
+#define INT2_LO_USBH_USBSTS		(18)
+/* not used 19-20 */
+#define INT2_LO_SSI0			(21)
+#define INT2_LO_SSI1			(22)
+#define INT2_LO_NFC			(23)
+/* not used 24-25 */
+#define INT2_LO_RTC			(26)
+#define INT2_LO_CCM_UOCSR		(27)
+#define INT2_LO_RNG_EI			(28)
+#define INT2_LO_SIM1_DATA		(29)
+#define INT2_LO_SIM1			(30)
+#define INT2_LO_SDHC			(31)
+/* not used 32-37 */
+#define INT2_HI_L2SW_BERR		(38)
+#define INT2_HI_L2SW_RXB		(39)
+#define INT2_HI_L2SW_RXF		(40)
+#define INT2_HI_L2SW_TXB		(41)
+#define INT2_HI_L2SW_TXF		(42)
+#define INT2_HI_L2SW_QM		(43)
+#define INT2_HI_L2SW_OD0		(44)
+#define INT2_HI_L2SW_OD1		(45)
+#define INT2_HI_L2SW_OD2		(46)
+#define INT2_HI_L2SW_LRN		(47)
+#define INT2_HI_MACNET0_TS		(48)
+#define INT2_HI_MACNET0_WAKE		(49)
+#define INT2_HI_MACNET0_PLR		(50)
+/* not used 51-54 */
+#define INT2_HI_MACNET1_TS		(51)
+#define INT2_HI_MACNET1_WAKE		(52)
+#define INT2_HI_MACNET1_PLR		(53)
+
+/* Serial Boot Facility (SBF) */
+#define SBF_SBFCR_BLDIV(x)		(((x)&0x000F))
+#define SBF_SBFCR_FR			(0x0010)
+
+/* Reset Controller Module (RCM) */
+#define RCM_RCR_SOFTRST		(0x80)
+#define RCM_RCR_FRCRSTOUT		(0x40)
+
+#define RCM_RSR_SOFT			(0x20)
+#define RCM_RSR_LOC			(0x10)
+#define RCM_RSR_POR			(0x08)
+#define RCM_RSR_EXT			(0x04)
+#define RCM_RSR_WDR_CORE		(0x02)
+#define RCM_RSR_LOL			(0x01)
+
+/* Chip Configuration Module (CCM) */
+#define CCM_CCR_BOOTMOD		(0xC000)
+#define CCM_CCR_PLLMULT		(0x0FC0)
+#define CCM_CCR_BOOTPS			(0x0030)
+#define CCM_CCR_BOOTPS_32		(0x0000)
+#define CCM_CCR_BOOTPS_16		(0x0020)
+#define CCM_CCR_BOOTPS_8		(0x0010)
+#define CCM_CCR_BOOTPS_		(0x0000)
+#define CCM_CCR_ALESEL			(0x0008)
+#define CCM_CCR_OSCMOD			(0x0004)
+#define CCM_CCR_PLLMOD			(0x0002)
+#define CCM_CCR_BOOTMEM		(0x0001)
+
+#define CCM_CIR_PIN_MASK		(0xFFC0)
+#define CCM_CIR_PRN_MASK		(0x003F)
+#define CCM_CIR_PIN_MCF54410		(0x9F<<6)
+#define CCM_CIR_PIN_MCF54415		(0xA0<<6)
+#define CCM_CIR_PIN_MCF54416		(0xA1<<6)
+#define CCM_CIR_PIN_MCF54417		(0xA2<<6)
+#define CCM_CIR_PIN_MCF54418		(0xA3<<6)
+
+#define CCM_MISCCR_PWM_EXTCLK(x)	(((x)&(0x0003)<<14)
+#define CCM_MISCCR_PWM_EXTCLK_MASK	(0x3FFF)
+#define CCM_MISCCR_PWM_EXTCLK_TMR0	(0x0000)
+#define CCM_MISCCR_PWM_EXTCLK_TMR1	(0x4000)
+#define CCM_MISCCR_PWM_EXTCLK_TMR2	(0x8000)
+#define CCM_MISCCR_PWM_EXTCLK_TMR3	(0xC000)
+#define CCM_MISCCR_LIMP		(0x1000)
+#define CCM_MISCCR_BME			(0x0800)
+#define CCM_MISCCR_BMT(x)		(((x)&0x0007)<<8)
+#define CCM_MISCCR_BMT_65536		(0)
+#define CCM_MISCCR_BMT_32768		(1)
+#define CCM_MISCCR_BMT_16384		(2)
+#define CCM_MISCCR_BMT_8192		(3)
+#define CCM_MISCCR_BMT_4096		(4)
+#define CCM_MISCCR_BMT_2048		(5)
+#define CCM_MISCCR_BMT_1024		(6)
+#define CCM_MISCCR_BMT_512		(7)
+#define CCM_MISCCR_SDHCSRC		(0x0040)
+#define CCM_MISCCR_SSI1SRC		(0x0020)
+#define CCM_MISCCR_SSI0SRC		(0x0010)
+#define CCM_MISCCR_USBHOC		(0x0008)
+#define CCM_MISCCR_USBOOC		(0x0004)
+#define CCM_MISCCR_USBPUE		(0x0002)
+#define CCM_MISCCR_USBSRC		(0x0001)
+
+#define CCM_CDRH_SSI0DIV(x)		(((x)&0x00FF)<<8)
+#define CCM_CDRH_SSI0DIV_MASK		(0x00FF)
+#define CCM_CDRH_SSI1DIV(x)		(((x)&0x00FF))
+#define CCM_CDRH_SSI1DIV_MASK		(0xFF00)
+#define CCM_CDRL_LPDIV(x)		(((x)&0x000F)<<8)
+#define CCM_CDRL_LPDIV_MASK		(0xFF0F)
+#define CCM_CDR_LPDIV(x)		CCM_CDRL_LPDIV(x)
+
+#define CCM_UOCSR_DPPD			(0x2000)
+#define CCM_UOCSR_DMPD			(0x1000)
+#define CCM_UOCSR_DRV_VBUS		(0x0800)
+#define CCM_UOCSR_CRG_VBUS		(0x0400)
+#define CCM_UOCSR_DCR_VBUS		(0x0200)
+#define CCM_UOCSR_DPPU			(0x0100)
+#define CCM_UOCSR_AVLD			(0x0080)
+#define CCM_UOCSR_BVLD			(0x0040)
+#define CCM_UOCSR_VVLD			(0x0020)
+#define CCM_UOCSR_SEND			(0x0010)
+#define CCM_UOCSR_PWRFLT		(0x0008)
+#define CCM_UOCSR_WKUP			(0x0004)
+#define CCM_UOCSR_UOMIE		(0x0002)
+#define CCM_UOCSR_XPDE			(0x0001)
+
+#define CCM_UHCSR_DRV_VBUS		(0x0010)
+#define CCM_UHCSR_PWRFLT		(0x0008)
+#define CCM_UHCSR_WKUP			(0x0004)
+#define CCM_UHCSR_UOMIE		(0x0002)
+#define CCM_UHCSR_XPDE			(0x0001)
+
+#define CCM_MISCCR3_TMR_ENET		(0x1000)
+#define CCM_MISCCR3_ENETCLK(x)		(((x)&7)<<8)
+#define CCM_MISCCR3_ENETCLK_MASK	(0xF8FF)
+#define CCM_MISCCR3_ENETCLK_MII	(0x0700)
+#define CCM_MISCCR3_ENETCLK_OSC	(0x0600)
+#define CCM_MISCCR3_ENETCLK_USB	(0x0500)
+#define CCM_MISCCR3_ENETCLK_TMR3	(0x0400)
+#define CCM_MISCCR3_ENETCLK_TMR2	(0x0300)
+#define CCM_MISCCR3_ENETCLK_TMR1	(0x0200)
+#define CCM_MISCCR3_ENETCLK_TMR0	(0x0100)
+#define CCM_MISCCR3_ENETCLK_INTBUS	(0x0000)
+
+#define CCM_MISCCR2_EXTCLKBYP		(0x8000)
+#define CCM_MISCCR2_DDR2CLK		(0x4000)
+#define CCM_MISCCR2_RGPIO_HALF		(0x2000)
+#define CCM_MISCCR2_SWTSCR		(0x1000)
+#define CCM_MISCCR2_PLLMODE(x)		(((x)&7)<<8)
+#define CCM_MISCCR2_PLLMODE_MASK	(0xF8FF)
+#define CCM_MISCCR2_DCCBYP		(0x0080)
+#define CCM_MISCCR2_DAC1SEL		(0x0040)
+#define CCM_MISCCR2_DAC0SEL		(0x0020)
+#define CCM_MISCCR2_ADCEN		(0x0010)
+#define CCM_MISCCR2_ADC7SEL		(0x0008)
+#define CCM_MISCCR2_ADC3SEL		(0x0004)
+#define CCM_MISCCR2_FBHALF		(0x0002)
+#define CCM_MISCCR2_ULPI		(0x0001)
+
+#define CCM_FNACR_PCR(x)		(((x)&0x0F)<<24)
+#define CCM_FNACR_PCR_MASK		(0xF0FFFFFF)
+#define CCM_FNACR_MCC(x)		((x)&0xFFFF)
+#define CCM_FNACR_MCC_MASK		(0xFFFF0000)
+
+/* General Purpose I/O Module (GPIO) */
+#define GPIO_PAR_FBCTL_ALE(x)		(((x)&3)<<6)
+#define GPIO_PAR_FBCTL_ALE_MASK	(0x3F)
+#define GPIO_PAR_FBCTL_ALE_FB_ALE	(0xC0)
+#define GPIO_PAR_FBCTL_ALE_FB_TS	(0x80)
+#define GPIO_PAR_FBCTL_ALE_GPIO	(0x00)
+#define GPIO_PAR_FBCTL_OE(x)		(((x)&3)<<4)
+#define GPIO_PAR_FBCTL_OE_MASK		(0xCF)
+#define GPIO_PAR_FBCTL_OE_FB_OE	(0x30)
+#define GPIO_PAR_FBCTL_OE_FB_TBST	(0x20)
+#define GPIO_PAR_FBCTL_OE_NFC_RE	(0x20)
+#define GPIO_PAR_FBCTL_OE_GPIO		(0x00)
+#define GPIO_PAR_FBCTL_FBCLK		(0x08)
+#define GPIO_PAR_FBCTL_RW		(0x04)
+#define GPIO_PAR_FBCTL_TA(x)		((x)&3)
+#define GPIO_PAR_FBCTL_TA_MASK		(0xFC)
+#define GPIO_PAR_FBCTL_TA_TA		(0x03)
+#define GPIO_PAR_FBCTL_TA_NFC_RB	(0x01)
+#define GPIO_PAR_FBCTL_TA_GPIO		(0x00)
+
+#define GPIO_PAR_BE_BS3(x)		(((x)&0x03)<<6)
+#define GPIO_PAR_BE_BE3_MASK		(0x3F)
+#define GPIO_PAR_BE_BE3_BE3		(0xC0)
+#define GPIO_PAR_BE_BE3_CS3		(0x80)
+#define GPIO_PAR_BE_BE3_FB_A1		(0x40)
+#define GPIO_PAR_BE_BE3_NFC_ALE	(0x40)
+#define GPIO_PAR_BE_BE3_GPIO		(0x00)
+#define GPIO_PAR_BE_BS2(x)		(((x)&0x03)<<4)
+#define GPIO_PAR_BE_BE2_MASK		(0xCF)
+#define GPIO_PAR_BE_BE2_BE2		(0x30)
+#define GPIO_PAR_BE_BE2_CS2		(0x20)
+#define GPIO_PAR_BE_BE2_FB_A0		(0x10)
+#define GPIO_PAR_BE_BE2_NFC_CLE	(0x10)
+#define GPIO_PAR_BE_BE2_GPIO		(0x00)
+#define GPIO_PAR_BE_BS1(x)		(((x)&0x03)<<2)
+#define GPIO_PAR_BE_BE1_MASK		(0xF3)
+#define GPIO_PAR_BE_BE1_BE1		(0x0C)
+#define GPIO_PAR_BE_BE1_FB_TSZ1	(0x08)
+#define GPIO_PAR_BE_BE1_GPIO		(0x00)
+#define GPIO_PAR_BE_BS0(x)		((x)&0x03)
+#define GPIO_PAR_BE_BE0_MASK		(0xFC)
+#define GPIO_PAR_BE_BE0_BE0		(0x03)
+#define GPIO_PAR_BE_BE0_FB_TSZ0	(0x02)
+#define GPIO_PAR_BE_BE0_GPIO		(0x00)
+
+#define GPIO_PAR_CS_CS5(x)		(((x)&0x03)<<6)
+#define GPIO_PAR_CS_CS5_MASK		(0x3F)
+#define GPIO_PAR_CS_CS5_CS5		(0xC0)
+#define GPIO_PAR_CS_CS5_DACK1		(0x80)
+#define GPIO_PAR_CS_CS5_GPIO		(0x00)
+#define GPIO_PAR_CS_CS4(x)		(((x)&0x03)<<4)
+#define GPIO_PAR_CS_CS4_MASK		(0xCF)
+#define GPIO_PAR_CS_CS4_CS4		(0x30)
+#define GPIO_PAR_CS_CS4_DREQ1		(0x20)
+#define GPIO_PAR_CS_CS4_GPIO		(0x00)
+#define GPIO_PAR_CS_CS1(x)		(((x)&0x03)<<2)
+#define GPIO_PAR_CS_CS1_MASK		(0xF3)
+#define GPIO_PAR_CS_CS1_CS1		(0x0C)
+#define GPIO_PAR_CS_CS1_NFC_CE		(0x04)
+#define GPIO_PAR_CS_CS1_GPIO		(0x00)
+#define GPIO_PAR_CS_CS0_CS0		(0x01)
+
+#define GPIO_PAR_CANI2C_I2C0SCL(x)	(((x)&0x03)<<6)
+#define GPIO_PAR_CANI2C_I2C0SCL_MASK	(0x3F)
+#define GPIO_PAR_CANI2C_I2C0SCL_I2C0SCL	(0xC0)
+#define GPIO_PAR_CANI2C_I2C0SCL_U8TXD	(0x80)
+#define GPIO_PAR_CANI2C_I2C0SCL_CAN0TX	(0x40)
+#define GPIO_PAR_CANI2C_I2C0SCL_GPIO	(0x00)
+#define GPIO_PAR_CANI2C_I2C0SDA(x)	(((x)&0x03)<<4)
+#define GPIO_PAR_CANI2C_I2C0SDA_MASK	(0xCF)
+#define GPIO_PAR_CANI2C_I2C0SDA_I2C0SDA	(0x30)
+#define GPIO_PAR_CANI2C_I2C0SDA_U8RXD	(0x20)
+#define GPIO_PAR_CANI2C_I2C0SDA_CAN0RX	(0x10)
+#define GPIO_PAR_CANI2C_I2C0SDA_GPIO	(0x00)
+#define GPIO_PAR_CANI2C_CAN1TX(x)	(((x)&0x03)<<2)
+#define GPIO_PAR_CANI2C_CAN1TX_MASK	(0xF3)
+#define GPIO_PAR_CANI2C_CAN1TX_CAN1TX	(0x0C)
+#define GPIO_PAR_CANI2C_CAN1TX_U9TXD	(0x08)
+#define GPIO_PAR_CANI2C_CAN1TX_I2C1SCL	(0x04)
+#define GPIO_PAR_CANI2C_CAN1TX_GPIO	(0x00)
+#define GPIO_PAR_CANI2C_CAN1RX(x)	((x)&0x03)
+#define GPIO_PAR_CANI2C_CAN1RX_MASK	(0xFC)
+#define GPIO_PAR_CANI2C_CAN1RX_CAN1RX	(0x03)
+#define GPIO_PAR_CANI2C_CAN1RX_U9RXD	(0x02)
+#define GPIO_PAR_CANI2C_CAN1RX_I2C1SDA	(0x01)
+#define GPIO_PAR_CANI2C_CAN1RX_GPIO	(0x00)
+
+#define GPIO_PAR_IRQH_IRQ7		(0x10)
+#define GPIO_PAR_IRQH_IRQ4(x)		(((x)&0x03)<<2)
+#define GPIO_PAR_IRQH_IRQ4_MASK	(0xF3)
+#define GPIO_PAR_IRQH_IRQ4_IRQ4	(0x0C)
+#define GPIO_PAR_IRQH_IRQ4_DREQ0	(0x08)
+#define GPIO_PAR_IRQH_IRQ4_GPIO	(0x00)
+#define GPIO_PAR_IRQH_IRQ1		(0x03)
+
+#define GPIO_PAR_IRQL_IRQ6(x)		(((x)&0x03)<<6)
+#define GPIO_PAR_IRQL_IRQ6_MASK	(0x3F)
+#define GPIO_PAR_IRQL_IRQ6_IRQ6	(0xC0)
+#define GPIO_PAR_IRQL_IRQ6_USBCLKIN	(0x40)
+#define GPIO_PAR_IRQL_IRQ6_GPIO	(0x00)
+#define GPIO_PAR_IRQL_IRQ3(x)		(((x)&0x03)<<4)
+#define GPIO_PAR_IRQL_IRQ3_MASK	(0xCF)
+#define GPIO_PAR_IRQL_IRQ3_IRQ3	(0x30)
+#define GPIO_PAR_IRQL_IRQ3_DSPI0_PCS3	(0x20)
+#define GPIO_PAR_IRQL_IRQ3_USB1_VBUS_EN	(0x10)
+#define GPIO_PAR_IRQL_IRQ3_GPIO	(0x00)
+#define GPIO_PAR_IRQL_IRQ2(x)		(((x)&0x03)<<2)
+#define GPIO_PAR_IRQL_IRQ2_MASK	(0xF3)
+#define GPIO_PAR_IRQL_IRQ2_IRQ2	(0x0C)
+#define GPIO_PAR_IRQL_IRQ2_DSPI0_PCS2	(0x08)
+#define GPIO_PAR_IRQL_IRQ2_USB1_VBUS_OC	(0x04)
+#define GPIO_PAR_IRQL_IRQ2_GPIO	(0x00)
+
+#define GPIO_PAR_DSPI0_SIN(x)		(((x)&0x03)<<6)
+#define GPIO_PAR_DSPI0_SIN_MASK	(0x3F)
+#define GPIO_PAR_DSPI0_SIN_DSPI0SIN	(0xC0)
+#define GPIO_PAR_DSPI0_SIN_SBF_DI	(0xC0)
+#define GPIO_PAR_DSPI0_SIN_U3RXD	(0x80)
+#define GPIO_PAR_DSPI0_SIN_SDHC_CMD	(0x40)
+#define GPIO_PAR_DSPI0_SIN_GPIO	(0x00)
+#define GPIO_PAR_DSPI0_SOUT(x)		(((x)&0x03)<<4)
+#define GPIO_PAR_DSPI0_SOUT_MASK	(0xCF)
+#define GPIO_PAR_DSPI0_SOUT_DSPI0SOUT	(0x30)
+#define GPIO_PAR_DSPI0_SOUT_SBF_DO	(0x30)
+#define GPIO_PAR_DSPI0_SOUT_U3TXD	(0x20)
+#define GPIO_PAR_DSPI0_SOUT_SDHC_DAT0	(0x10)
+#define GPIO_PAR_DSPI0_SOUT_GPIO	(0x00)
+#define GPIO_PAR_DSPI0_SCK(x)		(((x)&0x03)<<2)
+#define GPIO_PAR_DSPI0_SCK_MASK	(0xF3)
+#define GPIO_PAR_DSPI0_SCK_DSPI0SCK	(0x0C)
+#define GPIO_PAR_DSPI0_SCK_SBF_CK	(0x0C)
+#define GPIO_PAR_DSPI0_SCK_I2C3SCL	(0x08)
+#define GPIO_PAR_DSPI0_SCK_SDHC_CLK	(0x04)
+#define GPIO_PAR_DSPI0_SCK_GPIO	(0x00)
+#define GPIO_PAR_DSPI0_PCS0(x)		((x)&0x03)
+#define GPIO_PAR_DSPI0_PCS0_MASK	(0xFC)
+#define GPIO_PAR_DSPI0_PCS0_DSPI0PCS0	(0x03)
+#define GPIO_PAR_DSPI0_PCS0_SS		(0x03)
+#define GPIO_PAR_DSPI0_PCS0_I2C3SDA	(0x02)
+#define GPIO_PAR_DSPI0_PCS0_SDHC_DAT3	(0x01)
+#define GPIO_PAR_DSPI0_PCS0_GPIO	(0x00)
+
+#define GPIO_PAR_DSPIOW_DSPI0PSC1	(0x80)
+#define GPIO_PAR_DSPIOW_SBF_CS		(0x80)
+#define GPIO_PAR_DSPIOW_OWDAT		(((x)&0x03)<<4)
+#define GPIO_PAR_DSPIOW_OWDAT_MASK	(0xCF)
+#define GPIO_PAR_DSPIOW_OWDAT_OWDAT	(0x30)
+#define GPIO_PAR_DSPIOW_OWDAT_DACK0	(0x20)
+#define GPIO_PAR_DSPIOW_OWDAT_GPIO	(0x00)
+
+#define GPIO_PAR_TIMER_T3IN(x)		(((x)&0x03)<<6)
+#define GPIO_PAR_TIMER_T3IN_MASK	(0x3F)
+#define GPIO_PAR_TIMER_T3IN_T3IN	(0xC0)
+#define GPIO_PAR_TIMER_T3IN_EXTA3	(0xC0)
+#define GPIO_PAR_TIMER_T3IN_T3OUT	(0x80)
+#define GPIO_PAR_TIMER_T3IN_USB0_VBUSEN	(0x40)
+#define GPIO_PAR_TIMER_T3IN_ULIPI_DIR	(0x40)
+#define GPIO_PAR_TIMER_T3IN_GPIO	(0x00)
+#define GPIO_PAR_TIMER_T2IN(x)		(((x)&0x03)<<4)
+#define GPIO_PAR_TIMER_T2IN_MASK	(0xCF)
+#define GPIO_PAR_TIMER_T2IN_T2IN	(0x30)
+#define GPIO_PAR_TIMER_T2IN_EXTA2	(0x30)
+#define GPIO_PAR_TIMER_T2IN_T2OUT	(0x20)
+#define GPIO_PAR_TIMER_T2IN_SDHC_DAT2	(0x10)
+#define GPIO_PAR_TIMER_T2IN_GPIO	(0x00)
+#define GPIO_PAR_TIMER_T1IN(x)		(((x)&0x03)<<2)
+#define GPIO_PAR_TIMER_T1IN_MASK	(0xF3)
+#define GPIO_PAR_TIMER_T1IN_T1IN	(0x0C)
+#define GPIO_PAR_TIMER_T1IN_EXTA1	(0x0C)
+#define GPIO_PAR_TIMER_T1IN_T1OUT	(0x08)
+#define GPIO_PAR_TIMER_T1IN_SDHC_DAT1	(0x04)
+#define GPIO_PAR_TIMER_T1IN_GPIO	(0x00)
+#define GPIO_PAR_TIMER_T0IN(x)		((x)&0x03)
+#define GPIO_PAR_TIMER_T0IN_MASK	(0xFC)
+#define GPIO_PAR_TIMER_T0IN_T0IN	(0x03)
+#define GPIO_PAR_TIMER_T0IN_EXTA0	(0x03)
+#define GPIO_PAR_TIMER_T0IN_T0OUT	(0x02)
+#define GPIO_PAR_TIMER_T0IN_USBO_VBUSOC	(0x01)
+#define GPIO_PAR_TIMER_T0IN_ULPI_NXT	(0x01)
+#define GPIO_PAR_TIMER_T0IN_GPIO	(0x00)
+
+#define GPIO_PAR_UART2_U2CTS(x)	(((x)&0x03)<<6)
+#define GPIO_PAR_UART2_U2CTS_MASK	(0x3F)
+#define GPIO_PAR_UART2_U2CTS_U2CTS	(0xC0)
+#define GPIO_PAR_UART2_U2CTS_U6TXD	(0x80)
+#define GPIO_PAR_UART2_U2CTS_SSI1_BCLK	(0x40)
+#define GPIO_PAR_UART2_U2CTS_GPIO	(0x00)
+#define GPIO_PAR_UART2_U2RTS(x)	(((x)&0x03)<<4)
+#define GPIO_PAR_UART2_U2RTS_MASK	(0xCF)
+#define GPIO_PAR_UART2_U2RTS_U2RTS	(0x30)
+#define GPIO_PAR_UART2_U2RTS_U6RXD	(0x20)
+#define GPIO_PAR_UART2_U2RTS_SSI1_FS	(0x10)
+#define GPIO_PAR_UART2_U2RTS_GPIO	(0x00)
+#define GPIO_PAR_UART2_U2RXD(x)	(((x)&0x03)<<2)
+#define GPIO_PAR_UART2_U2RXD_MASK	(0xF3)
+#define GPIO_PAR_UART2_U2RXD_U2RXD	(0x0C)
+#define GPIO_PAR_UART2_U2RXD_PWM_A3	(0x08)
+#define GPIO_PAR_UART2_U2RXD_SSI1_RXD	(0x04)
+#define GPIO_PAR_UART2_U2RXD_GPIO	(0x00)
+#define GPIO_PAR_UART2_U2TXD(x)	((x)&0x03)
+#define GPIO_PAR_UART2_U2TXD_MASK	(0xFC)
+#define GPIO_PAR_UART2_U2TXD_U2TXD	(0x03)
+#define GPIO_PAR_UART2_U2TXD_PWM_B3	(0x02)
+#define GPIO_PAR_UART2_U2TXD_SSI1_TXD	(0x01)
+#define GPIO_PAR_UART2_U2TXD_GPIO	(0x00)
+
+#define GPIO_PAR_UART1_U1CTS(x)	(((x)&0x03)<<6)
+#define GPIO_PAR_UART1_U1CTS_MASK	(0x3F)
+#define GPIO_PAR_UART1_U1CTS_U1CTS	(0xC0)
+#define GPIO_PAR_UART1_U1CTS_U5TXD	(0x80)
+#define GPIO_PAR_UART1_U1CTS_DSPI3_SCK	(0x40)
+#define GPIO_PAR_UART1_U1CTS_GPIO	(0x00)
+#define GPIO_PAR_UART1_U1RTS(x)	(((x)&0x03)<<4)
+#define GPIO_PAR_UART1_U1RTS_MASK	(0xCF)
+#define GPIO_PAR_UART1_U1RTS_U1RTS	(0x30)
+#define GPIO_PAR_UART1_U1RTS_U5RXD	(0x20)
+#define GPIO_PAR_UART1_U1RTS_DSPI3_PCS0	(0x10)
+#define GPIO_PAR_UART1_U1RTS_GPIO	(0x00)
+#define GPIO_PAR_UART1_U1RXD(x)	(((x)&0x03)<<2)
+#define GPIO_PAR_UART1_U1RXD_MASK	(0xF3)
+#define GPIO_PAR_UART1_U1RXD_U1RXD	(0x0C)
+#define GPIO_PAR_UART1_U1RXD_I2C5SDA	(0x08)
+#define GPIO_PAR_UART1_U1RXD_DSPI3_SIN	(0x04)
+#define GPIO_PAR_UART1_U1RXD_GPIO	(0x00)
+#define GPIO_PAR_UART1_U1TXD(x)	((x)&0x03)
+#define GPIO_PAR_UART1_U1TXD_MASK	(0xFC)
+#define GPIO_PAR_UART1_U1TXD_U1TXD	(0x03)
+#define GPIO_PAR_UART1_U1TXD_I2C5SCL	(0x02)
+#define GPIO_PAR_UART1_U1TXD_DSPI3_SOUT	(0x01)
+#define GPIO_PAR_UART1_U1TXD_GPIO	(0x00)
+
+#define GPIO_PAR_UART0_U0CTS(x)	(((x)&0x03)<<6)
+#define GPIO_PAR_UART0_U0CTS_MASK	(0x3F)
+#define GPIO_PAR_UART0_U0CTS_U0CTS	(0xC0)
+#define GPIO_PAR_UART0_U0CTS_U4TXD	(0x80)
+#define GPIO_PAR_UART0_U0CTS_DSPI2_SCK	(0x40)
+#define GPIO_PAR_UART0_U0CTS_GPIO	(0x00)
+#define GPIO_PAR_UART0_U0RTS(x)	(((x)&0x03)<<4)
+#define GPIO_PAR_UART0_U0RTS_MASK	(0xCF)
+#define GPIO_PAR_UART0_U0RTS_U0RTS	(0x30)
+#define GPIO_PAR_UART0_U0RTS_U4RXD	(0x20)
+#define GPIO_PAR_UART0_U0RTS_DSPI2_PCS0	(0x10)
+#define GPIO_PAR_UART0_U0RTS_GPIO	(0x00)
+#define GPIO_PAR_UART0_U0RXD(x)	(((x)&0x03)<<2)
+#define GPIO_PAR_UART0_U0RXD_MASK	(0xF3)
+#define GPIO_PAR_UART0_U0RXD_U0RXD	(0x0C)
+#define GPIO_PAR_UART0_U0RXD_I2C4SDA	(0x08)
+#define GPIO_PAR_UART0_U0RXD_DSPI2_SIN	(0x04)
+#define GPIO_PAR_UART0_U0RXD_GPIO	(0x00)
+#define GPIO_PAR_UART0_U0TXD(x)	((x)&0x03)
+#define GPIO_PAR_UART0_U0TXD_MASK	(0xFC)
+#define GPIO_PAR_UART0_U0TXD_U0TXD	(0x03)
+#define GPIO_PAR_UART0_U0TXD_I2C4SCL	(0x02)
+#define GPIO_PAR_UART0_U0TXD_DSPI2_SOUT	(0x01)
+#define GPIO_PAR_UART0_U0TXD_GPIO	(0x00)
+
+#define GPIO_PAR_SDHCH_DAT3(x)		(((x)&0x03)<<6)
+#define GPIO_PAR_SDHCH_DAT3_MASK	(0x3F)
+#define GPIO_PAR_SDHCH_DAT3_DAT3	(0xC0)
+#define GPIO_PAR_SDHCH_DAT3_PWM_A1	(0x80)
+#define GPIO_PAR_SDHCH_DAT3_DSPI1_PCS0	(0x40)
+#define GPIO_PAR_SDHCH_DAT3_GPIO	(0x00)
+#define GPIO_PAR_SDHCH_DAT2(x)		(((x)&0x03)<<4)
+#define GPIO_PAR_SDHCH_DAT2_MASK	(0xCF)
+#define GPIO_PAR_SDHCH_DAT2_DAT2	(0x30)
+#define GPIO_PAR_SDHCH_DAT2_PWM_B1	(0x20)
+#define GPIO_PAR_SDHCH_DAT2_DSPI1_PCS2	(0x10)
+#define GPIO_PAR_SDHCH_DAT2_GPIO	(0x00)
+#define GPIO_PAR_SDHCH_DAT1(x)		(((x)&0x03)<<2)
+#define GPIO_PAR_SDHCH_DAT1_MASK	(0xF3)
+#define GPIO_PAR_SDHCH_DAT1_DAT1	(0x0C)
+#define GPIO_PAR_SDHCH_DAT1_PWM_A2	(0x08)
+#define GPIO_PAR_SDHCH_DAT1_DSPI1_PCS1	(0x04)
+#define GPIO_PAR_SDHCH_DAT1_GPIO	(0x00)
+#define GPIO_PAR_SDHCH_DAT0(x)		((x)&0x03)
+#define GPIO_PAR_SDHCH_DAT0_MASK	(0xFC)
+#define GPIO_PAR_SDHCH_DAT0_DAT0	(0x03)
+#define GPIO_PAR_SDHCH_DAT0_PWM_B2	(0x02)
+#define GPIO_PAR_SDHCH_DAT0_DSPI1_SOUT	(0x01)
+#define GPIO_PAR_SDHCH_DAT0_GPIO	(0x00)
+
+#define GPIO_PAR_SDHCL_CMD(x)		(((x)&0x03)<<2)
+#define GPIO_PAR_SDHCL_CMD_MASK	(0xF3)
+#define GPIO_PAR_SDHCL_CMD_CMD		(0x0C)
+#define GPIO_PAR_SDHCL_CMD_PWM_A0	(0x08)
+#define GPIO_PAR_SDHCL_CMD_DSPI1_SIN	(0x04)
+#define GPIO_PAR_SDHCL_CMD_GPIO	(0x00)
+#define GPIO_PAR_SDHCL_CLK(x)		((x)&0x03)
+#define GPIO_PAR_SDHCL_CLK_MASK	(0xFC)
+#define GPIO_PAR_SDHCL_CLK_CLK		(0x03)
+#define GPIO_PAR_SDHCL_CLK_PWM_B0	(0x02)
+#define GPIO_PAR_SDHCL_CLK_DSPI1_SCK	(0x01)
+#define GPIO_PAR_SDHCL_CLK_GPIO	(0x00)
+
+#define GPIO_PAR_SIMP0H_DAT(x)		(((x)&0x03)<<6)
+#define GPIO_PAR_SIMP0H_DAT_MASK	(0x3F)
+#define GPIO_PAR_SIMP0H_DAT_DAT	(0xC0)
+#define GPIO_PAR_SIMP0H_DAT_PWM_FAULT2	(0x80)
+#define GPIO_PAR_SIMP0H_DAT_SDHC_DAT7	(0x40)
+#define GPIO_PAR_SIMP0H_DAT_GPIO	(0x00)
+#define GPIO_PAR_SIMP0H_VEN(x)		(((x)&0x03)<<4)
+#define GPIO_PAR_SIMP0H_VEN_MASK	(0xCF)
+#define GPIO_PAR_SIMP0H_VEN_VEN	(0x30)
+#define GPIO_PAR_SIMP0H_VEN_PWM_FAULT0	(0x20)
+#define GPIO_PAR_SIMP0H_VEN_GPIO	(0x00)
+#define GPIO_PAR_SIMP0H_RST(x)		(((x)&0x03)<<2)
+#define GPIO_PAR_SIMP0H_RST_MASK	(0xF3)
+#define GPIO_PAR_SIMP0H_RST_RST	(0x0C)
+#define GPIO_PAR_SIMP0H_RST_PWM_FORCE	(0x08)
+#define GPIO_PAR_SIMP0H_RST_SDHC_DAT6	(0x04)
+#define GPIO_PAR_SIMP0H_RST_GPIO	(0x00)
+#define GPIO_PAR_SIMP0H_PD(x)		((x)&0x03)
+#define GPIO_PAR_SIMP0H_PD_MASK	(0xFC)
+#define GPIO_PAR_SIMP0H_PD_PD		(0x03)
+#define GPIO_PAR_SIMP0H_PD_PWM_SYNC	(0x02)
+#define GPIO_PAR_SIMP0H_PD_SDHC_DAT5	(0x01)
+#define GPIO_PAR_SIMP0H_PD_GPIO	(0x00)
+
+#define GPIO_PAR_SIMP0L_CLK(x)		((x)&0x03)
+#define GPIO_PAR_SIMP0L_CLK_MASK	(0xFC)
+#define GPIO_PAR_SIMP0L_CLK_CLK	(0x03)
+#define GPIO_PAR_SIMP0L_CLK_PWM_FAULT1	(0x02)
+#define GPIO_PAR_SIMP0L_CLK_SDHC_DAT4	(0x01)
+#define GPIO_PAR_SIMP0L_CLK_GPIO	(0x00)
+
+#define GPIO_PAR_SSI0H_RXD(x)		(((x)&0x03)<<6)
+#define GPIO_PAR_SSI0H_RXD_MASK	(0x3F)
+#define GPIO_PAR_SSI0H_RXD_RXD		(0xC0)
+#define GPIO_PAR_SSI0H_RXD_I2C2SDA	(0x80)
+#define GPIO_PAR_SSI0H_RXD_SIM1_VEN	(0x40)
+#define GPIO_PAR_SSI0H_RXD_GPIO	(0x00)
+#define GPIO_PAR_SSI0H_TXD(x)		(((x)&0x03)<<4)
+#define GPIO_PAR_SSI0H_TXD_MASK	(0xCF)
+#define GPIO_PAR_SSI0H_TXD_TXD		(0x30)
+#define GPIO_PAR_SSI0H_TXD_I2C2SCL	(0x20)
+#define GPIO_PAR_SSI0H_TXD_SIM1_DAT	(0x10)
+#define GPIO_PAR_SSI0H_TXD_GPIO	(0x00)
+#define GPIO_PAR_SSI0H_FS(x)		(((x)&0x03)<<2)
+#define GPIO_PAR_SSI0H_FS_MASK		(0xF3)
+#define GPIO_PAR_SSI0H_FS_FS		(0x0C)
+#define GPIO_PAR_SSI0H_FS_U7TXD	(0x08)
+#define GPIO_PAR_SSI0H_FS_SIM1_RST	(0x04)
+#define GPIO_PAR_SSI0H_FS_GPIO		(0x00)
+#define GPIO_PAR_SSI0H_MCLK(x)		((x)&0x03)
+#define GPIO_PAR_SSI0H_MCLK_MASK	(0xFC)
+#define GPIO_PAR_SSI0H_MCLK_MCLK	(0x03)
+#define GPIO_PAR_SSI0H_MCLK_SSI_CLKIN	(0x02)
+#define GPIO_PAR_SSI0H_MCLK_SIM1_CLK	(0x01)
+#define GPIO_PAR_SSI0H_MCLK_GPIO	(0x00)
+
+#define GPIO_PAR_SSI0L_BCLK(x)		((x)&0x03)
+#define GPIO_PAR_SSI0L_BCLK_MASK	(0xFC)
+#define GPIO_PAR_SSI0L_BCLK_BCLK	(0x03)
+#define GPIO_PAR_SSI0L_BCLK_U7RXD	(0x02)
+#define GPIO_PAR_SSI0L_BCLK_SIM1_PD	(0x01)
+#define GPIO_PAR_SSI0L_BCLK_GPIO	(0x00)
+
+#define GPIO_PAR_DEBUGH1_DAT3		(0x40)
+#define GPIO_PAR_DEBUGH1_DAT2		(0x10)
+#define GPIO_PAR_DEBUGH1_DAT1		(0x04)
+#define GPIO_PAR_DEBUGH1_DAT0		(0x01)
+
+#define GPIO_PAR_DEBUGH0_PST3		(0x40)
+#define GPIO_PAR_DEBUGH0_PST2		(0x10)
+#define GPIO_PAR_DEBUGH0_PST1		(0x04)
+#define GPIO_PAR_DEBUGH0_PST0		(0x01)
+
+#define GPIO_PODR_G4_VAL		(0x01 << 4)
+#define GPIO_PODR_G4_MASK		(0xff & ~GPIO_PODR_G4_VAL)
+#define GPIO_PDDR_G4_OUTPUT		(0x01 << 4)
+#define GPIO_PDDR_G4_MASK		(0xff & ~GPIO_PDDR_G4_OUTPUT)
+
+#define GPIO_PAR_DEBUGL_ALLPST		(0x01)
+
+#define GPIO_PAR_FEC_FEC(x)		((x)&0x0F)
+#define GPIO_PAR_FEC_FEC_MASK		(0xF0)
+#define GPIO_PAR_FEC_FEC_GPIO		(0x0D)
+#define GPIO_PAR_FEC_FEC_RMII1		(0x0C)
+#define GPIO_PAR_FEC_FEC_RMII1FUL	(0x0B)
+#define GPIO_PAR_FEC_FEC_RMII_ULPI	(0x0A)
+#define GPIO_PAR_FEC_FEC_RMII0		(0x09)
+#define GPIO_PAR_FEC_FEC_RMII0FUL_ULPI	(0x08)
+#define GPIO_PAR_FEC_FEC_RMII0FUL	(0x07)
+#define GPIO_PAR_FEC_FEC_RMII0_1FUL	(0x06)
+#define GPIO_PAR_FEC_FEC_RMII0FUL_1	(0x05)	/* 0:Full 1: */
+/* Both 0&1: MDC, MDIO, COL & TXER - GPIO */
+#define GPIO_PAR_FEC_FEC_RMII0_1	(0x04)
+#define GPIO_PAR_FEC_FEC_RMII0FUL_1FUL	(0x03)
+#define GPIO_PAR_FEC_FEC_MII		(0x01)	/* MDC & MDIO - GPIO */
+#define GPIO_PAR_FEC_FEC_MIIFUL	(0x00)
+
+
+/* TC: Need to edit here.... */
+
+/* Mode Select Control */
+#define GPIO_MSCR_SDRAM_MSC(x)		((x)&0x03)
+#define GPIO_MSCR_SDRAM_MSC_MASK	(0xFC)
+
+/* Slew Rate Control */
+
+#define GPIO_SRCR_FB3_FB3(x)		((x)&0x03)
+#define GPIO_SRCR_FB3_FB3_MASK		(0xFC)
+
+#define GPIO_SRCR_FB2_FB2(x)		((x)&0x03)
+#define GPIO_SRCR_FB2_FB2_MASK		(0xFC)
+
+#define GPIO_SRCR_FB1_FB1(x)		((x)&0x03)
+#define GPIO_SRCR_FB1_FB1_MASK		(0xFC)
+
+#define GPIO_SRCR_FB4_FB5(x)		(((x)&0x03)<<2)
+#define GPIO_SRCR_FB4_FB5_MASK		(0xF3)
+#define GPIO_SRCR_FB4_FB4(x)		((x)&0x03)
+#define GPIO_SRCR_FB4_FB4_MASK		(0xFC)
+
+#define GPIO_SRCR_DSPIOW_OWDAT(x)	(((x)&0x03)<<4)
+#define GPIO_SRCR_DSPIOW_OWDAT_MASK	(0xCF)
+#define GPIO_SRCR_DSPIOW_DSPI0(x)	((x)&0x03)
+#define GPIO_SRCR_DSPIOW_DSPI0_MASK	(0xFC)
+
+#define GPIO_SRCR_CANI2C_CAN1(x)	(((x)&0x03)<<2)
+#define GPIO_SRCR_CANI2C_CAN1_MASK	(0xF3)
+#define GPIO_SRCR_CANI2C_I2C0(x)	((x)&0x03)
+#define GPIO_SRCR_CANI2C_I2C0_MASK	(0xFC)
+
+#define GPIO_SRCR_IRQ0_IRQ0(x)		((x)&0x03)
+#define GPIO_SRCR_IRQ0_IRQ0_MASK	(0xFC)
+
+#define GPIO_SRCR_TIMER_TMR3(x)	(((x)&0x03)<<6)
+#define GPIO_SRCR_TIMER_TMR3_MASK	(0x3F)
+#define GPIO_SRCR_TIMER_TMR2(x)	(((x)&0x03)<<4)
+#define GPIO_SRCR_TIMER_TMR2_MASK	(0xCF)
+#define GPIO_SRCR_TIMER_TMR1(x)	(((x)&0x03)<<2)
+#define GPIO_SRCR_TIMER_TMR1_MASK	(0xF3)
+#define GPIO_SRCR_TIMER_TMR0(x)	((x)&0x03)
+#define GPIO_SRCR_TIMER_TMR0_MASK	(0xFC)
+
+#define GPIO_SRCR_UART_U2(x)		(((x)&0x03)<<4)
+#define GPIO_SRCR_UART_U2_MASK		(0xCF)
+#define GPIO_SRCR_UART_U1(x)		(((x)&0x03)<<2)
+#define GPIO_SRCR_UART_U1_MASK		(0xF3)
+#define GPIO_SRCR_UART_U0(x)		((x)&0x03)
+#define GPIO_SRCR_UART_U0_MASK		(0xFC)
+
+#define GPIO_SRCR_FEC_RMII0(x)		(((x)&0x03)<<2)
+#define GPIO_SRCR_FEC_RMII0_MASK	(0xF3)
+#define GPIO_SRCR_FEC_RMII1(x)		((x)&0x03)
+#define GPIO_SRCR_FEC_RMII1_MASK	(0xFC)
+
+#define GPIO_SRCR_SDHC_SDHC(x)		((x)&0x03)
+#define GPIO_SRCR_SDHC_SDHC_MASK	(0xFC)
+
+#define GPIO_SRCR_SIM0_SIMP0(x)	((x)&0x03)
+#define GPIO_SRCR_SIM0_SIMP0_MASK	(0xFC)
+
+#define GPIO_SRCR_SSI0_SSI0(x)		((x)&0x03)
+#define GPIO_SRCR_SSI0_SSI0_MASK	(0xFC)
+
+#define GPIO_PCR_URTS_U2		(0x0004)
+#define GPIO_PCR_URTS_U1		(0x0002)
+#define GPIO_PCR_URTS_U0		(0x0001)
+
+#define GPIO_PCR_UCTS_U2		(0x0004)
+#define GPIO_PCR_UCTS_U1		(0x0002)
+#define GPIO_PCR_UCTS_U0		(0x0001)
+
+#define GPIO_UTXD_WOM_U9		(0x0200)
+#define GPIO_UTXD_WOM_U8		(0x0100)
+#define GPIO_UTXD_WOM_U7		(0x0080)
+#define GPIO_UTXD_WOM_U6		(0x0040)
+#define GPIO_UTXD_WOM_U5		(0x0020)
+#define GPIO_UTXD_WOM_U4		(0x0010)
+#define GPIO_UTXD_WOM_U3		(0x0008)
+#define GPIO_UTXD_WOM_U2		(0x0004)
+#define GPIO_UTXD_WOM_U1		(0x0002)
+#define GPIO_UTXD_WOM_U0		(0x0001)
+
+#define GPIO_URXD_WOM_U9(x)		(((x)&3)<<18)
+#define GPIO_URXD_WOM_U9_MASK		(0xFFF3FFFF)
+#define GPIO_URXD_WOM_U8(x)		(((x)&3)<<16)
+#define GPIO_URXD_WOM_U8_MASK		(0xFFFCFFFF)
+#define GPIO_URXD_WOM_U7(x)		(((x)&3)<<14)
+#define GPIO_URXD_WOM_U7_MASK		(0xFFFF3FFF)
+#define GPIO_URXD_WOM_U6(x)		(((x)&3)<<12)
+#define GPIO_URXD_WOM_U6_MASK		(0xFFFFCFFF)
+#define GPIO_URXD_WOM_U5(x)		(((x)&3)<<10)
+#define GPIO_URXD_WOM_U5_MASK		(0xFFFFF3FF)
+#define GPIO_URXD_WOM_U4(x)		(((x)&3)<<8)
+#define GPIO_URXD_WOM_U4_MASK		(0xFFFFFCFF)
+#define GPIO_URXD_WOM_U3(x)		(((x)&3)<<6)
+#define GPIO_URXD_WOM_U3_MASK		(0xFFFFFF3F)
+#define GPIO_URXD_WOM_U2(x)		(((x)&3)<<4)
+#define GPIO_URXD_WOM_U2_MASK		(0xFFFFFFCF)
+#define GPIO_URXD_WOM_U1(x)		(((x)&3)<<2)
+#define GPIO_URXD_WOM_U1_MASK		(0xFFFFFFF3)
+#define GPIO_URXD_WOM_U0(x)		((x)&3)
+#define GPIO_URXD_WOM_U0_MASK		(0xFFFFFFFC)
+
+#define GPIO_HCR1_PG4_0(x)		(((x)&0x1F)<<27)
+#define GPIO_HCR1_PG4_0_MASK		(0x07FFFFFF)
+#define GPIO_HCR1_PF7_3(x)		(((x)&0x1F)<<22)
+#define GPIO_HCR1_PF7_3_MASK		(0xF83FFFFF)
+#define GPIO_HCR1_PE6_0(x)		(((x)&0x7F)<<15)
+#define GPIO_HCR1_PE6_0_MASK		(0xFFC07FFF)
+#define GPIO_HCR1_PD7_3(x)		(((x)&0x1F)<<10)
+#define GPIO_HCR1_PD7_3_MASK		(0xFFFF83FF)
+#define GPIO_HCR1_PC7_1(x)		(((x)&0x7F)<<3)
+#define GPIO_HCR1_PC7_1_MASK		(0xFFFFFC07)
+#define GPIO_HCR1_PB2_0(x)		((x)&7)
+#define GPIO_HCR1_PB2_0_MASK		(0xFFFFFFF8)
+
+#define GPIO_HCR0_PK3			(0x00000400)
+#define GPIO_HCR0_PK0			(0x00000200)
+#define GPIO_HCR0_PD2_0(x)		(((x)&7)<<6)
+#define GPIO_HCR0_PD2_0_MASK		(0xFFFFFE3F)
+#define GPIO_HCR0_PE7			(0x00000020)
+#define GPIO_HCR0_PH7_3(x)		((x)&0x1F)
+#define GPIO_HCR0_PH7_3_MASK(x)	(0xFFFFFFE0)
+
+/* SDRAM Controller (SDRAMC) */
+
+/* Phase Locked Loop (PLL) */
+#define PLL_CR_LOCIRQ			(0x00040000)
+#define PLL_CR_LOCRE			(0x00020000)
+#define PLL_CR_LOCEN			(0x00010000)
+#define PLL_CR_LOLIRQ			(0x00004000)
+#define PLL_CR_LOLRE			(0x00002000)
+#define PLL_CR_LOLEN			(0x00001000)
+#define PLL_CR_REFDIV(x)		(((x)&7)<<8)
+#define PLL_CR_REFDIV_MASK		(0xFFFFF8FF)
+#define PLL_CR_FBKDIV(x)		((x)&0x3F)
+#define PLL_CR_FBKDIV_MASK		(0xFFFFFFC0)
+#define PLL_CR_FBKDIV_BITS		(0x3F)
+
+#define PLL_DR_OUTDIV5(x)		(((x)&0x1F)<<21)
+#define PLL_DR_OUTDIV5_MASK		(0xFC1FFFFF)
+#define PLL_DR_OUTDIV5_BITS		(0x03E00000)
+#define PLL_DR_OUTDIV4(x)		(((x)&0x1F)<<16)
+#define PLL_DR_OUTDIV4_MASK		(0xFFE0FFFF)
+#define PLL_DR_OUTDIV4_BITS		(0x001F0000)
+#define PLL_DR_OUTDIV3(x)		(((x)&0x1F)<<10)
+#define PLL_DR_OUTDIV3_MASK		(0xFFFF83FF)
+#define PLL_DR_OUTDIV3_BITS		(0x00007C00)
+#define PLL_DR_OUTDIV2(x)		(((x)&0x1F)<<5)
+#define PLL_DR_OUTDIV2_MASK		(0xFFFFFC1F)
+#define PLL_DR_OUTDIV2_BITS		(0x000003E0)
+#define PLL_DR_OUTDIV1(x)		((x)&0x1F)
+#define PLL_DR_OUTDIV1_MASK		(0xFFFFFFE0)
+#define PLL_DR_OUTDIV1_BITS		(0x0000001F)
+
+#define PLL_SR_LOCF			(0x00000200)
+#define PLL_SR_LOC			(0x00000100)
+#define PLL_SR_LOLF			(0x00000040)
+#define PLL_SR_LOCKS			(0x00000020)
+#define PLL_SR_LOCK			(0x00000010)
+#define PLL_PSR_LOCK			PLL_SR_LOCK	/* compatible with 5x */
+#define PLL_SR_MODE(x)			((x)&7)
+#define PLL_SR_MODE_MASK		(0xFFFFFFF8)
+
+#endif				/* __MCF5441X__ */
diff --git a/arch/m68k/include/asm/u-boot.h b/arch/m68k/include/asm/u-boot.h
index 973c9ee..8c7c554 100644
--- a/arch/m68k/include/asm/u-boot.h
+++ b/arch/m68k/include/asm/u-boot.h
@@ -58,7 +58,7 @@
 	unsigned long bi_vcofreq;	/* vco Freq in MHz */
 	unsigned long bi_flbfreq;	/* Flexbus Freq in MHz */
 #endif
-	unsigned long bi_baudrate;	/* Console Baudrate */
+	unsigned int bi_baudrate;	/* Console Baudrate */
 } bd_t;
 
 #endif				/* __ASSEMBLY__ */
diff --git a/arch/m68k/lib/board.c b/arch/m68k/lib/board.c
index 67c9a13..02d73fd 100644
--- a/arch/m68k/lib/board.c
+++ b/arch/m68k/lib/board.c
@@ -29,6 +29,7 @@
 #include <command.h>
 #include <malloc.h>
 #include <stdio_dev.h>
+#include <linux/compiler.h>
 
 #include <asm/immap.h>
 
@@ -387,7 +388,7 @@
  */
 void board_init_r (gd_t *id, ulong dest_addr)
 {
-	char *s;
+	char *s __maybe_unused;
 	bd_t *bd;
 
 #ifndef CONFIG_ENV_IS_NOWHERE
@@ -415,8 +416,8 @@
 	/*
 	 * We have to relocate the command table manually
 	 */
-	fixup_cmdtable(&__u_boot_cmd_start,
-		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+	fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+			ll_entry_count(cmd_tbl_t, cmd));
 #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
diff --git a/arch/microblaze/cpu/cache.c b/arch/microblaze/cpu/cache.c
index d258a69..ce066b9 100644
--- a/arch/microblaze/cpu/cache.c
+++ b/arch/microblaze/cpu/cache.c
@@ -61,12 +61,7 @@
 
 void	dcache_disable(void) {
 #ifdef XILINX_USE_DCACHE
-#ifdef XILINX_DCACHE_BYTE_SIZE
 	flush_cache(0, XILINX_DCACHE_BYTE_SIZE);
-#else
-#warning please rebuild BSPs and update configuration
-	flush_cache(0, 32768);
-#endif
 #endif
 	MSRCLR(0x80);
 }
diff --git a/arch/microblaze/cpu/start.S b/arch/microblaze/cpu/start.S
index 8564c4e..3da711d 100644
--- a/arch/microblaze/cpu/start.S
+++ b/arch/microblaze/cpu/start.S
@@ -132,6 +132,12 @@
 	rsubi	r8, r10, 0x26
 	sh	r6, r0, r8
 
+	/* Flush cache before enable cache */
+	addik	r5, r0, 0
+	addik	r6, r0, XILINX_DCACHE_BYTE_SIZE
+flush:	bralid r15, flush_cache
+	nop
+
 	/* enable instruction and data cache */
 	mfs	r12, rmsr
 	ori	r12, r12, 0xa0
diff --git a/arch/microblaze/cpu/u-boot.lds b/arch/microblaze/cpu/u-boot.lds
index d033a28..fe3d97d 100644
--- a/arch/microblaze/cpu/u-boot.lds
+++ b/arch/microblaze/cpu/u-boot.lds
@@ -45,17 +45,16 @@
 	.data ALIGN(0x4):
 	{
 		__data_start = .;
+#ifdef CONFIG_OF_EMBED
 		dts/libdts.o (.data)
+#endif
 		*(.data)
 		__data_end = .;
 	}
 
-	.u_boot_cmd ALIGN(0x4):
-	{
-		. = .;
-		__u_boot_cmd_start = .;
-		*(.u_boot_cmd)
-		__u_boot_cmd_end = .;
+	. = ALIGN(4);
+	.u_boot_list : {
+		#include <u-boot.lst>
 	}
 
 	.bss ALIGN(0x4):
diff --git a/arch/microblaze/include/asm/bitops.h b/arch/microblaze/include/asm/bitops.h
index e8c835f..eafa2b5 100644
--- a/arch/microblaze/include/asm/bitops.h
+++ b/arch/microblaze/include/asm/bitops.h
@@ -319,7 +319,8 @@
 #define ext2_find_first_zero_bit(addr, size) \
 	ext2_find_next_zero_bit((addr), (size), 0)
 
-extern __inline__ unsigned long ext2_find_next_zero_bit(void *addr, unsigned long size, unsigned long offset)
+static inline unsigned long ext2_find_next_zero_bit(void *addr,
+				unsigned long size, unsigned long offset)
 {
 	unsigned long *p = ((unsigned long *) addr) + (offset >> 5);
 	unsigned long result = offset & ~31UL;
diff --git a/arch/microblaze/include/asm/byteorder.h b/arch/microblaze/include/asm/byteorder.h
index b2757a4..f3a471d 100644
--- a/arch/microblaze/include/asm/byteorder.h
+++ b/arch/microblaze/include/asm/byteorder.h
@@ -20,29 +20,6 @@
 
 #ifdef __GNUC__
 
-/* This is effectively a dupe of the arch-independent byteswap
-   code in include/linux/byteorder/swab.h, however we force a cast
-   of the result up to 32 bits.  This in turn forces the compiler
-   to explicitly clear the high 16 bits, which it wasn't doing otherwise.
-
-   I think this is a symptom of a bug in mb-gcc.  JW 20040303
-*/
-
-
-static __inline__ __u16 ___arch__swab16 (__u16 half_word)
-{
-	/* 32 bit temp to cast result, forcing clearing of high word */
-	__u32 temp;
-
-	temp = ((half_word & 0x00FFU) << 8) | ((half_word & 0xFF00U) >> 8);
-
-	return (__u16) temp;
-}
-
-#define __arch__swab16(x) ___arch__swab16(x)
-
-/* Microblaze has no arch-specific endian conversion insns */
-
 #if !defined(__STRICT_ANSI__) || defined(__KERNEL__)
 #  define __BYTEORDER_HAS_U64__
 #  define __SWAB_64_THRU_32__
diff --git a/arch/microblaze/include/asm/global_data.h b/arch/microblaze/include/asm/global_data.h
index de3b8db..2111c7c 100644
--- a/arch/microblaze/include/asm/global_data.h
+++ b/arch/microblaze/include/asm/global_data.h
@@ -35,7 +35,7 @@
 typedef	struct	global_data {
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	have_console;	/* serial_init() was called */
 #ifdef CONFIG_PRE_CONSOLE_BUFFER
 	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
diff --git a/arch/microblaze/include/asm/posix_types.h b/arch/microblaze/include/asm/posix_types.h
index 9a2cc66..38dc5aa 100644
--- a/arch/microblaze/include/asm/posix_types.h
+++ b/arch/microblaze/include/asm/posix_types.h
@@ -16,9 +16,6 @@
 #ifndef __MICROBLAZE_POSIX_TYPES_H__
 #define __MICROBLAZE_POSIX_TYPES_H__
 
-#include <asm/bitops.h>
-
-
 typedef unsigned int	__kernel_dev_t;
 typedef unsigned long	__kernel_ino_t;
 typedef unsigned long long __kernel_ino64_t;
diff --git a/arch/microblaze/include/asm/u-boot.h b/arch/microblaze/include/asm/u-boot.h
index a0b1dbf..8d00658 100644
--- a/arch/microblaze/include/asm/u-boot.h
+++ b/arch/microblaze/include/asm/u-boot.h
@@ -40,7 +40,7 @@
 	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
 	unsigned long	bi_sramstart;	/* start of SRAM memory */
 	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
-	unsigned long	bi_baudrate;	/* Console Baudrate */
+	unsigned int	bi_baudrate;	/* Console Baudrate */
 } bd_t;
 
 /* For image.h:image_check_target_arch() */
diff --git a/arch/microblaze/lib/bootm.c b/arch/microblaze/lib/bootm.c
index 95cee50..66d21f4 100644
--- a/arch/microblaze/lib/bootm.c
+++ b/arch/microblaze/lib/bootm.c
@@ -70,12 +70,7 @@
 #endif
 
 #ifdef XILINX_USE_DCACHE
-#ifdef XILINX_DCACHE_BYTE_SIZE
 	flush_cache(0, XILINX_DCACHE_BYTE_SIZE);
-#else
-#warning please rebuild BSPs and update configuration
-	flush_cache(0, 32768);
-#endif
 #endif
 	/*
 	 * Linux Kernel Parameters (passing device tree):
diff --git a/arch/mips/cpu/mips32/au1x00/Makefile b/arch/mips/cpu/mips32/au1x00/Makefile
index dc58475..b9f895d 100644
--- a/arch/mips/cpu/mips32/au1x00/Makefile
+++ b/arch/mips/cpu/mips32/au1x00/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(SOC).o
 
-COBJS	= au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o
+COBJS	= au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o au1x00_ide.o
 
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/arch/arm/include/asm/arch-lpc2292/hardware.h b/arch/mips/cpu/mips32/au1x00/au1x00_ide.c
similarity index 70%
copy from arch/arm/include/asm/arch-lpc2292/hardware.h
copy to arch/mips/cpu/mips32/au1x00/au1x00_ide.c
index 5e227e3..932cdfb 100644
--- a/arch/arm/include/asm/arch-lpc2292/hardware.h
+++ b/arch/mips/cpu/mips32/au1x00/au1x00_ide.c
@@ -1,9 +1,6 @@
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
 /*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
+ * (C) Copyright 2000-2011
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -22,12 +19,14 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
+ *
  */
 
-#if defined(CONFIG_LPC2292)
-#include <asm/arch-lpc2292/lpc2292_registers.h>
-#else
-#error No hardware file defined for this configuration
-#endif
+#include <common.h>
+#include <ide.h>
 
-#endif /* __ASM_ARCH_HARDWARE_H */
+/* AU1X00 swaps data in big-endian mode, enforce little-endian function */
+void ide_input_swap_data(int dev, ulong *sect_buf, int words)
+{
+	ide_input_data(dev, sect_buf, words);
+}
diff --git a/arch/mips/cpu/mips32/au1x00/au1x00_serial.c b/arch/mips/cpu/mips32/au1x00/au1x00_serial.c
index 0beac98..3e85b90 100644
--- a/arch/mips/cpu/mips32/au1x00/au1x00_serial.c
+++ b/arch/mips/cpu/mips32/au1x00/au1x00_serial.c
@@ -103,12 +103,6 @@
 	*uart_tx = (u32)c;
 }
 
-static void au1x00_serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
 static int au1x00_serial_getc(void)
 {
 	volatile u32 *uart_rx = (volatile u32*)(UART0_ADDR+UART_RX);
@@ -137,7 +131,7 @@
 	.stop	= NULL,
 	.setbrg	= au1x00_serial_setbrg,
 	.putc	= au1x00_serial_putc,
-	.puts	= au1x00_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= au1x00_serial_getc,
 	.tstc	= au1x00_serial_tstc,
 };
diff --git a/arch/mips/cpu/mips32/cache.S b/arch/mips/cpu/mips32/cache.S
index e683e8b..64dfad0 100644
--- a/arch/mips/cpu/mips32/cache.S
+++ b/arch/mips/cpu/mips32/cache.S
@@ -85,17 +85,17 @@
 	/* clear tag to invalidate */
 	PTR_LI		t0, INDEX_BASE
 	PTR_ADDU	t1, t0, a1
-1:	cache_op	Index_Store_Tag_I t0
+1:	cache_op	INDEX_STORE_TAG_I t0
 	PTR_ADDU	t0, a2
 	bne		t0, t1, 1b
 	/* fill once, so data field parity is correct */
 	PTR_LI		t0, INDEX_BASE
-2:	cache_op	Fill t0
+2:	cache_op	FILL t0
 	PTR_ADDU	t0, a2
 	bne		t0, t1, 2b
 	/* invalidate again - prudent but not strictly neccessary */
 	PTR_LI		t0, INDEX_BASE
-1:	cache_op	Index_Store_Tag_I t0
+1:	cache_op	INDEX_STORE_TAG_I t0
 	PTR_ADDU	t0, a2
 	bne		t0, t1, 1b
 9:	jr		ra
@@ -110,7 +110,7 @@
 	/* clear all tags */
 	PTR_LI		t0, INDEX_BASE
 	PTR_ADDU	t1, t0, a1
-1:	cache_op	Index_Store_Tag_D t0
+1:	cache_op	INDEX_STORE_TAG_D t0
 	PTR_ADDU	t0, a2
 	bne		t0, t1, 1b
 	/* load from each line (in cached space) */
@@ -120,7 +120,7 @@
 	bne		t0, t1, 2b
 	/* clear all tags */
 	PTR_LI		t0, INDEX_BASE
-1:	cache_op	Index_Store_Tag_D t0
+1:	cache_op	INDEX_STORE_TAG_D t0
 	PTR_ADDU	t0, a2
 	bne		t0, t1, 1b
 9:	jr		ra
diff --git a/arch/mips/cpu/mips32/cpu.c b/arch/mips/cpu/mips32/cpu.c
index 7b49e1b..50bb248 100644
--- a/arch/mips/cpu/mips32/cpu.c
+++ b/arch/mips/cpu/mips32/cpu.c
@@ -61,8 +61,8 @@
 		return;
 
 	while (1) {
-		cache_op(Hit_Writeback_Inv_D, addr);
-		cache_op(Hit_Invalidate_I, addr);
+		cache_op(HIT_WRITEBACK_INV_D, addr);
+		cache_op(HIT_INVALIDATE_I, addr);
 		if (addr == aend)
 			break;
 		addr += lsize;
@@ -76,7 +76,7 @@
 	unsigned long aend = (stop - 1) & ~(lsize - 1);
 
 	while (1) {
-		cache_op(Hit_Writeback_Inv_D, addr);
+		cache_op(HIT_WRITEBACK_INV_D, addr);
 		if (addr == aend)
 			break;
 		addr += lsize;
@@ -90,7 +90,7 @@
 	unsigned long aend = (stop - 1) & ~(lsize - 1);
 
 	while (1) {
-		cache_op(Hit_Invalidate_D, addr);
+		cache_op(HIT_INVALIDATE_D, addr);
 		if (addr == aend)
 			break;
 		addr += lsize;
diff --git a/arch/mips/cpu/mips32/incaip/asc_serial.c b/arch/mips/cpu/mips32/incaip/asc_serial.c
index 08949f4..6f0e4f2 100644
--- a/arch/mips/cpu/mips32/incaip/asc_serial.c
+++ b/arch/mips/cpu/mips32/incaip/asc_serial.c
@@ -236,14 +236,6 @@
     }
 }
 
-static void asc_serial_puts(const char *s)
-{
-    while (*s)
-    {
-	serial_putc (*s++);
-    }
-}
-
 static int asc_serial_getc(void)
 {
     ulong symbol_mask;
@@ -292,7 +284,7 @@
 	.stop	= NULL,
 	.setbrg	= asc_serial_setbrg,
 	.putc	= asc_serial_putc,
-	.puts	= asc_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= asc_serial_getc,
 	.tstc	= asc_serial_tstc,
 };
diff --git a/arch/arm/cpu/lh7a40x/Makefile b/arch/mips/cpu/mips64/Makefile
similarity index 83%
rename from arch/arm/cpu/lh7a40x/Makefile
rename to arch/mips/cpu/mips64/Makefile
index 01cf7f5..be38664 100644
--- a/arch/arm/cpu/lh7a40x/Makefile
+++ b/arch/mips/cpu/mips64/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2006
+# (C) Copyright 2003-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -26,10 +26,10 @@
 LIB	= $(obj)lib$(CPU).o
 
 START	= start.o
-COBJS	= cpu.o speed.o timer.o
+COBJS-y	= cpu.o interrupts.o time.o cache.o
 
-SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+SRCS	:= $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
 START	:= $(addprefix $(obj),$(START))
 
 all:	$(obj).depend $(START) $(LIB)
@@ -43,5 +43,3 @@
 include $(SRCTREE)/rules.mk
 
 sinclude $(obj).depend
-
-#########################################################################
diff --git a/arch/mips/cpu/mips64/cache.S b/arch/mips/cpu/mips64/cache.S
new file mode 100644
index 0000000..036f035
--- /dev/null
+++ b/arch/mips/cpu/mips64/cache.S
@@ -0,0 +1,229 @@
+/*
+ *  Cache-handling routined for MIPS CPUs
+ *
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/asm.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/cacheops.h>
+
+#define RA		t9
+
+/*
+ * 16kB is the maximum size of instruction and data caches on MIPS 4K,
+ * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience.
+ *
+ * Note that the above size is the maximum size of primary cache. U-Boot
+ * doesn't have L2 cache support for now.
+ */
+#define MIPS_MAX_CACHE_SIZE	0x10000
+
+#define INDEX_BASE	CKSEG0
+
+	.macro	cache_op op addr
+	.set	push
+	.set	noreorder
+	.set	mips3
+	cache	\op, 0(\addr)
+	.set	pop
+	.endm
+
+	.macro	f_fill64 dst, offset, val
+	LONG_S	\val, (\offset +  0 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  1 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  2 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  3 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  4 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  5 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  6 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  7 * LONGSIZE)(\dst)
+#if LONGSIZE == 4
+	LONG_S	\val, (\offset +  8 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset +  9 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 10 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 11 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 12 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 13 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 14 * LONGSIZE)(\dst)
+	LONG_S	\val, (\offset + 15 * LONGSIZE)(\dst)
+#endif
+	.endm
+
+/*
+ * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz)
+ */
+LEAF(mips_init_icache)
+	blez		a1, 9f
+	mtc0		zero, CP0_TAGLO
+	/* clear tag to invalidate */
+	PTR_LI		t0, INDEX_BASE
+	PTR_ADDU	t1, t0, a1
+1:	cache_op	INDEX_STORE_TAG_I t0
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 1b
+	/* fill once, so data field parity is correct */
+	PTR_LI		t0, INDEX_BASE
+2:	cache_op	FILL t0
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 2b
+	/* invalidate again - prudent but not strictly neccessary */
+	PTR_LI		t0, INDEX_BASE
+1:	cache_op	INDEX_STORE_TAG_I t0
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 1b
+9:	jr		ra
+	END(mips_init_icache)
+
+/*
+ * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz)
+ */
+LEAF(mips_init_dcache)
+	blez		a1, 9f
+	mtc0		zero, CP0_TAGLO
+	/* clear all tags */
+	PTR_LI		t0, INDEX_BASE
+	PTR_ADDU	t1, t0, a1
+1:	cache_op	INDEX_STORE_TAG_D t0
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 1b
+	/* load from each line (in cached space) */
+	PTR_LI		t0, INDEX_BASE
+2:	LONG_L		zero, 0(t0)
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 2b
+	/* clear all tags */
+	PTR_LI		t0, INDEX_BASE
+1:	cache_op	INDEX_STORE_TAG_D t0
+	PTR_ADDU	t0, a2
+	bne		t0, t1, 1b
+9:	jr		ra
+	END(mips_init_dcache)
+
+/*
+ * mips_cache_reset - low level initialisation of the primary caches
+ *
+ * This routine initialises the primary caches to ensure that they have good
+ * parity.  It must be called by the ROM before any cached locations are used
+ * to prevent the possibility of data with bad parity being written to memory.
+ *
+ * To initialise the instruction cache it is essential that a source of data
+ * with good parity is available. This routine will initialise an area of
+ * memory starting at location zero to be used as a source of parity.
+ *
+ * RETURNS: N/A
+ *
+ */
+NESTED(mips_cache_reset, 0, ra)
+	move	RA, ra
+	li	t2, CONFIG_SYS_ICACHE_SIZE
+	li	t3, CONFIG_SYS_DCACHE_SIZE
+	li	t8, CONFIG_SYS_CACHELINE_SIZE
+
+	li	v0, MIPS_MAX_CACHE_SIZE
+
+	/*
+	 * Now clear that much memory starting from zero.
+	 */
+	PTR_LI		a0, CKSEG1
+	PTR_ADDU	a1, a0, v0
+2:	PTR_ADDIU	a0, 64
+	f_fill64	a0, -64, zero
+	bne		a0, a1, 2b
+
+	/*
+	 * The caches are probably in an indeterminate state,
+	 * so we force good parity into them by doing an
+	 * invalidate, load/fill, invalidate for each line.
+	 */
+
+	/*
+	 * Assume bottom of RAM will generate good parity for the cache.
+	 */
+
+	/*
+	 * Initialize the I-cache first,
+	 */
+	move	a1, t2
+	move	a2, t8
+	PTR_LA	v1, mips_init_icache
+	jalr	v1
+
+	/*
+	 * then initialize D-cache.
+	 */
+	move	a1, t3
+	move	a2, t8
+	PTR_LA	v1, mips_init_dcache
+	jalr	v1
+
+	jr	RA
+	END(mips_cache_reset)
+
+/*
+ * dcache_status - get cache status
+ *
+ * RETURNS: 0 - cache disabled; 1 - cache enabled
+ *
+ */
+LEAF(dcache_status)
+	mfc0	t0, CP0_CONFIG
+	li	t1, CONF_CM_UNCACHED
+	andi	t0, t0, CONF_CM_CMASK
+	move	v0, zero
+	beq	t0, t1, 2f
+	li	v0, 1
+2:	jr	ra
+	END(dcache_status)
+
+/*
+ * dcache_disable - disable cache
+ *
+ * RETURNS: N/A
+ *
+ */
+LEAF(dcache_disable)
+	mfc0	t0, CP0_CONFIG
+	li	t1, -8
+	and	t0, t0, t1
+	ori	t0, t0, CONF_CM_UNCACHED
+	mtc0	t0, CP0_CONFIG
+	jr	ra
+	END(dcache_disable)
+
+/*
+ * dcache_enable - enable cache
+ *
+ * RETURNS: N/A
+ *
+ */
+LEAF(dcache_enable)
+	mfc0	t0, CP0_CONFIG
+	ori	t0, CONF_CM_CMASK
+	xori	t0, CONF_CM_CMASK
+	ori	t0, CONF_CM_CACHABLE_NONCOHERENT
+	mtc0	t0, CP0_CONFIG
+	jr	ra
+	END(dcache_enable)
diff --git a/board/bmw/config.mk b/arch/mips/cpu/mips64/config.mk
similarity index 61%
copy from board/bmw/config.mk
copy to arch/mips/cpu/mips64/config.mk
index a1a44e5..ebc1ceb 100644
--- a/board/bmw/config.mk
+++ b/arch/mips/cpu/mips64/config.mk
@@ -1,6 +1,6 @@
 #
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# (C) Copyright 2003
+# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -22,9 +22,19 @@
 #
 
 #
-# BMW board
+# Default optimization level for MIPS64
 #
+# Note: Toolchains with binutils prior to v2.16
+# are no longer supported by U-Boot MIPS tree!
+#
+MIPSFLAGS = -march=mips64
 
-# NOTE: The flags below affect how the BCM570x driver is compiled
-PLATFORM_CPPFLAGS += -DEMBEDDED -DBIG_ENDIAN_HOST -DINCLUDE_5701_AX_FIX=1\
-		     -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256
+PLATFORM_CPPFLAGS += $(MIPSFLAGS)
+PLATFORM_CPPFLAGS += -mabi=64 -DCONFIG_64BIT
+ifdef CONFIG_SYS_BIG_ENDIAN
+PLATFORM_LDFLAGS  += -m elf64btsmip
+else
+PLATFORM_LDFLAGS  += -m elf64ltsmip
+endif
+
+CONFIG_STANDALONE_LOAD_ADDR ?= 0xffffffff80200000 -T mips64.lds
diff --git a/arch/mips/cpu/mips64/cpu.c b/arch/mips/cpu/mips64/cpu.c
new file mode 100644
index 0000000..2a38d0c
--- /dev/null
+++ b/arch/mips/cpu/mips64/cpu.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mipsregs.h>
+#include <asm/cacheops.h>
+#include <asm/reboot.h>
+
+#define cache_op(op, addr)						\
+	__asm__ __volatile__(						\
+	"	.set	push\n"						\
+	"	.set	noreorder\n"					\
+	"	.set	mips64\n"					\
+	"	cache	%0, %1\n"					\
+	"	.set	pop\n"						\
+	:								\
+	: "i" (op), "R" (*(unsigned char *)(addr)))
+
+void __attribute__((weak)) _machine_restart(void)
+{
+	fprintf(stderr, "*** reset failed ***\n");
+
+	while (1)
+		/* NOP */;
+}
+
+int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	_machine_restart();
+
+	return 0;
+}
+
+void flush_cache(ulong start_addr, ulong size)
+{
+	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+	unsigned long addr = start_addr & ~(lsize - 1);
+	unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
+
+	/* aend will be miscalculated when size is zero, so we return here */
+	if (size == 0)
+		return;
+
+	while (1) {
+		cache_op(HIT_WRITEBACK_INV_D, addr);
+		cache_op(HIT_INVALIDATE_I, addr);
+		if (addr == aend)
+			break;
+		addr += lsize;
+	}
+}
+
+void flush_dcache_range(ulong start_addr, ulong stop)
+{
+	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+	unsigned long addr = start_addr & ~(lsize - 1);
+	unsigned long aend = (stop - 1) & ~(lsize - 1);
+
+	while (1) {
+		cache_op(HIT_WRITEBACK_INV_D, addr);
+		if (addr == aend)
+			break;
+		addr += lsize;
+	}
+}
+
+void invalidate_dcache_range(ulong start_addr, ulong stop)
+{
+	unsigned long lsize = CONFIG_SYS_CACHELINE_SIZE;
+	unsigned long addr = start_addr & ~(lsize - 1);
+	unsigned long aend = (stop - 1) & ~(lsize - 1);
+
+	while (1) {
+		cache_op(HIT_INVALIDATE_D, addr);
+		if (addr == aend)
+			break;
+		addr += lsize;
+	}
+}
+
+void write_one_tlb(int index, u32 pagemask, u32 hi, u32 low0, u32 low1)
+{
+	write_c0_entrylo0(low0);
+	write_c0_pagemask(pagemask);
+	write_c0_entrylo1(low1);
+	write_c0_entryhi(hi);
+	write_c0_index(index);
+	tlb_write_indexed();
+}
diff --git a/arch/arm/include/asm/arch-lpc2292/hardware.h b/arch/mips/cpu/mips64/interrupts.c
similarity index 70%
copy from arch/arm/include/asm/arch-lpc2292/hardware.h
copy to arch/mips/cpu/mips64/interrupts.c
index 5e227e3..e4e9aae 100644
--- a/arch/arm/include/asm/arch-lpc2292/hardware.h
+++ b/arch/mips/cpu/mips64/interrupts.c
@@ -1,9 +1,6 @@
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
 /*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -24,10 +21,14 @@
  * MA 02111-1307 USA
  */
 
-#if defined(CONFIG_LPC2292)
-#include <asm/arch-lpc2292/lpc2292_registers.h>
-#else
-#error No hardware file defined for this configuration
-#endif
+#include <common.h>
+#include <asm/mipsregs.h>
 
-#endif /* __ASM_ARCH_HARDWARE_H */
+void enable_interrupts(void)
+{
+}
+
+int disable_interrupts(void)
+{
+	return 0;
+}
diff --git a/arch/mips/cpu/mips64/start.S b/arch/mips/cpu/mips64/start.S
new file mode 100644
index 0000000..4112de7
--- /dev/null
+++ b/arch/mips/cpu/mips64/start.S
@@ -0,0 +1,256 @@
+/*
+ *  Startup Code for MIPS64 CPU-core
+ *
+ *  Copyright (c) 2003	Wolfgang Denk <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any dlater version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICUdlaR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Pdlace, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <asm-offsets.h>
+#include <config.h>
+#include <asm/regdef.h>
+#include <asm/mipsregs.h>
+
+#ifndef CONFIG_SYS_MIPS_CACHE_MODE
+#define CONFIG_SYS_MIPS_CACHE_MODE CONF_CM_CACHABLE_NONCOHERENT
+#endif
+
+	/*
+	 * For the moment disable interrupts, mark the kernel mode and
+	 * set ST0_KX so that the CPU does not spit fire when using
+	 * 64-bit addresses.
+	 */
+	.macro	setup_c0_status set clr
+	.set	push
+	mfc0	t0, CP0_STATUS
+	or	t0, ST0_CU0 | \set | 0x1f | \clr
+	xor	t0, 0x1f | \clr
+	mtc0	t0, CP0_STATUS
+	.set	noreorder
+	sll	zero, 3				# ehb
+	.set	pop
+	.endm
+
+	.set noreorder
+
+	.globl _start
+	.text
+_start:
+	.org 0x000
+	b	reset
+	 nop
+	.org 0x080
+	b	romReserved
+	 nop
+	.org 0x100
+	b	romReserved
+	 nop
+	.org 0x180
+	b	romReserved
+	 nop
+	.org 0x200
+	b	romReserved
+	 nop
+	.org 0x280
+	b	romReserved
+	 nop
+	.org 0x300
+	b	romReserved
+	 nop
+	.org 0x380
+	b	romReserved
+	 nop
+	.org 0x480
+	b	romReserved
+	 nop
+
+	/*
+	 * We hope there are no more reserved vectors!
+	 * 128 * 8 == 1024 == 0x400
+	 * so this is address R_VEC+0x400 == 0xbfc00400
+	 */
+	.org 0x500
+	.align 4
+reset:
+
+	/* Clear watch registers */
+	dmtc0	zero, CP0_WATCHLO
+	dmtc0	zero, CP0_WATCHHI
+
+	/* WP(Watch Pending), SW0/1 should be cleared */
+	mtc0	zero, CP0_CAUSE
+
+	setup_c0_status ST0_KX 0
+
+	/* Init Timer */
+	mtc0	zero, CP0_COUNT
+	mtc0	zero, CP0_COMPARE
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	/* CONFIG0 register */
+	dli	t0, CONF_CM_UNCACHED
+	mtc0	t0, CP0_CONFIG
+#endif
+
+	/* Initialize $gp */
+	bal	1f
+	 nop
+	.dword	_gp
+1:
+	ld	gp, 0(ra)
+
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
+	/* Initialize any external memory */
+	dla	t9, lowlevel_init
+	jalr	t9
+	 nop
+
+	/* Initialize caches... */
+	dla	t9, mips_cache_reset
+	jalr	t9
+	 nop
+
+	/* ... and enable them */
+	dli	t0, CONFIG_SYS_MIPS_CACHE_MODE
+	mtc0	t0, CP0_CONFIG
+#endif
+
+	/* Set up temporary stack */
+	dli	t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
+	dla	sp, 0(t0)
+
+	dla	t9, board_init_f
+	jr	t9
+	 nop
+
+/*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+ * This "function" does not return, instead it continues in RAM
+ * after relocating the monitor code.
+ *
+ * a0 = addr_sp
+ * a1 = gd
+ * a2 = destination address
+ */
+	.globl	relocate_code
+	.ent	relocate_code
+relocate_code:
+	move	sp, a0			# set new stack pointer
+
+	dli	t0, CONFIG_SYS_MONITOR_BASE
+	dla	t3, in_ram
+	ld	t2, -24(t3)		# t2 <-- uboot_end_data
+	move	t1, a2
+	move	s2, a2			# s2 <-- destination address
+
+	/*
+	 * Fix $gp:
+	 *
+	 * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
+	 */
+	move	t8, gp
+	dsub	gp, CONFIG_SYS_MONITOR_BASE
+	dadd	gp, a2			# gp now adjusted
+	dsub	s1, gp, t8		# s1 <-- relocation offset
+
+	/*
+	 * t0 = source address
+	 * t1 = target address
+	 * t2 = source end address
+	 */
+
+	/*
+	 * Save destination address and size for dlater usage in flush_cache()
+	 */
+	move	s0, a1			# save gd in s0
+	move	a0, t1			# a0 <-- destination addr
+	dsub	a1, t2, t0		# a1 <-- size
+
+1:
+	lw	t3, 0(t0)
+	sw	t3, 0(t1)
+	daddu	t0, 4
+	ble	t0, t2, 1b
+	 daddu	t1, 4
+
+	/* If caches were enabled, we would have to flush them here. */
+
+	/* a0 & a1 are already set up for flush_cache(start, size) */
+	dla	t9, flush_cache
+	jalr	t9
+	 nop
+
+	/* Jump to where we've relocated ourselves */
+	daddi	t0, s2, in_ram - _start
+	jr	t0
+	 nop
+
+	.dword	_gp
+	.dword	_GLOBAL_OFFSET_TABLE_
+	.dword	uboot_end_data
+	.dword	uboot_end
+	.dword	num_got_entries
+
+in_ram:
+	/*
+	 * Now we want to update GOT.
+	 *
+	 * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
+	 * generated by GNU ld. Skip these reserved entries from relocation.
+	 */
+	ld	t3, -8(t0)		# t3 <-- num_got_entries
+	ld	t8, -32(t0)		# t8 <-- _GLOBAL_OFFSET_TABLE_
+	ld	t9, -40(t0)		# t9 <-- _gp
+	dsub	t8, t9			# compute offset
+	dadd	t8, t8, gp		# t8 now holds relocated _G_O_T_
+	daddi	t8, t8, 16		# skipping first two entries
+	dli	t2, 2
+1:
+	ld	t1, 0(t8)
+	beqz	t1, 2f
+	 dadd	t1, s1
+	sd	t1, 0(t8)
+2:
+	daddi	t2, 1
+	blt	t2, t3, 1b
+	 daddi	t8, 8
+
+	/* Clear BSS */
+	ld	t1, -24(t0)		# t1 <-- uboot_end_data
+	ld	t2, -16(t0)		# t2 <-- uboot_end
+	dadd	t1, s1			# adjust pointers
+	dadd	t2, s1
+
+	dsub	t1, 8
+1:
+	daddi	t1, 8
+	bltl	t1, t2, 1b
+	 sd	zero, 0(t1)
+
+	move	a0, s0			# a0 <-- gd
+	dla	t9, board_init_r
+	jr	t9
+	 move	a1, s2
+
+	.end	relocate_code
+
+	/* Exception handlers */
+romReserved:
+	b	romReserved
diff --git a/arch/mips/cpu/mips64/time.c b/arch/mips/cpu/mips64/time.c
new file mode 100644
index 0000000..5154280
--- /dev/null
+++ b/arch/mips/cpu/mips64/time.c
@@ -0,0 +1,87 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mipsregs.h>
+
+static unsigned long timestamp;
+
+/* how many counter cycles in a jiffy */
+#define CYCLES_PER_JIFFY	 \
+	(CONFIG_SYS_MIPS_TIMER_FREQ + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ
+
+/*
+ * timer without interrupts
+ */
+
+int timer_init(void)
+{
+	/* Set up the timer for the first expiration. */
+	timestamp = 0;
+	write_c0_compare(read_c0_count() + CYCLES_PER_JIFFY);
+
+	return 0;
+}
+
+ulong get_timer(ulong base)
+{
+	unsigned int count;
+	unsigned int expirelo = read_c0_compare();
+
+	/* Check to see if we have missed any timestamps. */
+	count = read_c0_count();
+	while ((count - expirelo) < 0x7fffffff) {
+		expirelo += CYCLES_PER_JIFFY;
+		timestamp++;
+	}
+	write_c0_compare(expirelo);
+
+	return timestamp - base;
+}
+
+void __udelay(unsigned long usec)
+{
+	unsigned int tmo;
+
+	tmo = read_c0_count() + (usec * (CONFIG_SYS_MIPS_TIMER_FREQ / 1000000));
+	while ((tmo - read_c0_count()) < 0x7fffffff)
+		/*NOP*/;
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On MIPS it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+	return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On MIPS it returns the number of timer ticks per second.
+ */
+ulong get_tbclk(void)
+{
+	return CONFIG_SYS_HZ;
+}
diff --git a/arch/mips/cpu/xburst/cpu.c b/arch/mips/cpu/xburst/cpu.c
index ddcbfaa..cc190df 100644
--- a/arch/mips/cpu/xburst/cpu.c
+++ b/arch/mips/cpu/xburst/cpu.c
@@ -84,8 +84,8 @@
 	unsigned long aend = (start_addr + size - 1) & ~(lsize - 1);
 
 	for (; addr <= aend; addr += lsize) {
-		cache_op(Hit_Writeback_Inv_D, addr);
-		cache_op(Hit_Invalidate_I, addr);
+		cache_op(HIT_WRITEBACK_INV_D, addr);
+		cache_op(HIT_INVALIDATE_I, addr);
 	}
 }
 
@@ -96,7 +96,7 @@
 	unsigned long aend = (stop - 1) & ~(lsize - 1);
 
 	for (; addr <= aend; addr += lsize)
-		cache_op(Hit_Writeback_Inv_D, addr);
+		cache_op(HIT_WRITEBACK_INV_D, addr);
 }
 
 void invalidate_dcache_range(ulong start_addr, ulong stop)
@@ -106,7 +106,7 @@
 	unsigned long aend = (stop - 1) & ~(lsize - 1);
 
 	for (; addr <= aend; addr += lsize)
-		cache_op(Hit_Invalidate_D, addr);
+		cache_op(HIT_INVALIDATE_D, addr);
 }
 
 void flush_icache_all(void)
@@ -118,7 +118,7 @@
 
 	for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_ICACHE_SIZE;
 	     addr += CONFIG_SYS_CACHELINE_SIZE) {
-		cache_op(Index_Store_Tag_I, addr);
+		cache_op(INDEX_STORE_TAG_I, addr);
 	}
 
 	/* invalidate btb */
@@ -139,7 +139,7 @@
 
 	for (addr = CKSEG0; addr < CKSEG0 + CONFIG_SYS_DCACHE_SIZE;
 	     addr += CONFIG_SYS_CACHELINE_SIZE) {
-		cache_op(Index_Writeback_Inv_D, addr);
+		cache_op(INDEX_WRITEBACK_INV_D, addr);
 	}
 
 	__asm__ __volatile__("sync");
diff --git a/arch/mips/cpu/xburst/jz_serial.c b/arch/mips/cpu/xburst/jz_serial.c
index 3199007..a147657 100644
--- a/arch/mips/cpu/xburst/jz_serial.c
+++ b/arch/mips/cpu/xburst/jz_serial.c
@@ -109,19 +109,13 @@
 	return readb(&uart->rbr_thr_dllr);
 }
 
-static void jz_serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
 static struct serial_device jz_serial_drv = {
 	.name	= "jz_serial",
 	.start	= jz_serial_init,
 	.stop	= NULL,
 	.setbrg	= jz_serial_setbrg,
 	.putc	= jz_serial_putc,
-	.puts	= jz_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= jz_serial_getc,
 	.tstc	= jz_serial_tstc,
 };
diff --git a/arch/mips/cpu/xburst/start.S b/arch/mips/cpu/xburst/start.S
index d846104..3a8280c 100644
--- a/arch/mips/cpu/xburst/start.S
+++ b/arch/mips/cpu/xburst/start.S
@@ -96,7 +96,7 @@
 	li	t0, KSEG0
 	addi	t1, t0, CONFIG_SYS_DCACHE_SIZE
 2:
-	cache	Index_Writeback_Inv_D, 0(t0)
+	cache	INDEX_WRITEBACK_INV_D, 0(t0)
 	bne	t0, t1, 2b
 	 addi	t0, CONFIG_SYS_CACHELINE_SIZE
 
@@ -106,7 +106,7 @@
 	li	t0, KSEG0
 	addi	t1, t0, CONFIG_SYS_ICACHE_SIZE
 3:
-	cache	Index_Invalidate_I, 0(t0)
+	cache	INDEX_INVALIDATE_I, 0(t0)
 	bne	t0, t1, 3b
 	 addi	t0, CONFIG_SYS_CACHELINE_SIZE
 
diff --git a/arch/mips/include/asm/addrspace.h b/arch/mips/include/asm/addrspace.h
index 3a1e6d6..b768bb5 100644
--- a/arch/mips/include/asm/addrspace.h
+++ b/arch/mips/include/asm/addrspace.h
@@ -136,7 +136,7 @@
    cannot access physical memory directly from core */
 #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000)
 #else	/* !CONFIG_SOC_AU1X00 */
-#define UNCACHED_SDRAM(a) KSEG1ADDR(a)
+#define UNCACHED_SDRAM(a) CKSEG1ADDR(a)
 #endif	/* CONFIG_SOC_AU1X00 */
 #endif	/* __ASSEMBLY__ */
 
diff --git a/arch/mips/include/asm/asm.h b/arch/mips/include/asm/asm.h
index 608cfcf..933ccb1 100644
--- a/arch/mips/include/asm/asm.h
+++ b/arch/mips/include/asm/asm.h
@@ -401,7 +401,7 @@
 #ifdef CONFIG_SGI_IP28
 /* Inhibit speculative stores to volatile (e.g.DMA) or invalid addresses. */
 #include <asm/cacheops.h>
-#define R10KCBARRIER(addr)  cache   Cache_Barrier, addr;
+#define R10KCBARRIER(addr)  cache   CACHE_BARRIER, addr;
 #else
 #define R10KCBARRIER(addr)
 #endif
diff --git a/arch/mips/include/asm/cacheops.h b/arch/mips/include/asm/cacheops.h
index 70bcad7..6464250 100644
--- a/arch/mips/include/asm/cacheops.h
+++ b/arch/mips/include/asm/cacheops.h
@@ -14,54 +14,54 @@
 /*
  * Cache Operations available on all MIPS processors with R4000-style caches
  */
-#define Index_Invalidate_I      0x00
-#define Index_Writeback_Inv_D   0x01
-#define Index_Load_Tag_I	0x04
-#define Index_Load_Tag_D	0x05
-#define Index_Store_Tag_I	0x08
-#define Index_Store_Tag_D	0x09
+#define INDEX_INVALIDATE_I      0x00
+#define INDEX_WRITEBACK_INV_D   0x01
+#define INDEX_LOAD_TAG_I	0x04
+#define INDEX_LOAD_TAG_D	0x05
+#define INDEX_STORE_TAG_I	0x08
+#define INDEX_STORE_TAG_D	0x09
 #if defined(CONFIG_CPU_LOONGSON2)
-#define Hit_Invalidate_I	0x00
+#define HIT_INVALIDATE_I	0x00
 #else
-#define Hit_Invalidate_I	0x10
+#define HIT_INVALIDATE_I	0x10
 #endif
-#define Hit_Invalidate_D	0x11
-#define Hit_Writeback_Inv_D	0x15
+#define HIT_INVALIDATE_D	0x11
+#define HIT_WRITEBACK_INV_D	0x15
 
 /*
  * R4000-specific cacheops
  */
-#define Create_Dirty_Excl_D	0x0d
-#define Fill			0x14
-#define Hit_Writeback_I		0x18
-#define Hit_Writeback_D		0x19
+#define CREATE_DIRTY_EXCL_D	0x0d
+#define FILL			0x14
+#define HIT_WRITEBACK_I		0x18
+#define HIT_WRITEBACK_D		0x19
 
 /*
  * R4000SC and R4400SC-specific cacheops
  */
-#define Index_Invalidate_SI     0x02
-#define Index_Writeback_Inv_SD  0x03
-#define Index_Load_Tag_SI	0x06
-#define Index_Load_Tag_SD	0x07
-#define Index_Store_Tag_SI	0x0A
-#define Index_Store_Tag_SD	0x0B
-#define Create_Dirty_Excl_SD	0x0f
-#define Hit_Invalidate_SI	0x12
-#define Hit_Invalidate_SD	0x13
-#define Hit_Writeback_Inv_SD	0x17
-#define Hit_Writeback_SD	0x1b
-#define Hit_Set_Virtual_SI	0x1e
-#define Hit_Set_Virtual_SD	0x1f
+#define INDEX_INVALIDATE_SI     0x02
+#define INDEX_WRITEBACK_INV_SD  0x03
+#define INDEX_LOAD_TAG_SI	0x06
+#define INDEX_LOAD_TAG_SD	0x07
+#define INDEX_STORE_TAG_SI	0x0A
+#define INDEX_STORE_TAG_SD	0x0B
+#define CREATE_DIRTY_EXCL_SD	0x0f
+#define HIT_INVALIDATE_SI	0x12
+#define HIT_INVALIDATE_SD	0x13
+#define HIT_WRITEBACK_INV_SD	0x17
+#define HIT_WRITEBACK_SD	0x1b
+#define HIT_SET_VIRTUAL_SI	0x1e
+#define HIT_SET_VIRTUAL_SD	0x1f
 
 /*
  * R5000-specific cacheops
  */
-#define R5K_Page_Invalidate_S	0x17
+#define R5K_PAGE_INVALIDATE_S	0x17
 
 /*
  * RM7000-specific cacheops
  */
-#define Page_Invalidate_T	0x16
+#define PAGE_INVALIDATE_T	0x16
 
 /*
  * R10000-specific cacheops
@@ -69,17 +69,17 @@
  * Cacheops 0x02, 0x06, 0x0a, 0x0c-0x0e, 0x16, 0x1a and 0x1e are unused.
  * Most of the _S cacheops are identical to the R4000SC _SD cacheops.
  */
-#define Index_Writeback_Inv_S	0x03
-#define Index_Load_Tag_S	0x07
-#define Index_Store_Tag_S	0x0B
-#define Hit_Invalidate_S	0x13
-#define Cache_Barrier		0x14
-#define Hit_Writeback_Inv_S	0x17
-#define Index_Load_Data_I	0x18
-#define Index_Load_Data_D	0x19
-#define Index_Load_Data_S	0x1b
-#define Index_Store_Data_I	0x1c
-#define Index_Store_Data_D	0x1d
-#define Index_Store_Data_S	0x1f
+#define INDEX_WRITEBACK_INV_S	0x03
+#define INDEX_LOAD_TAG_S	0x07
+#define INDEX_STORE_TAG_S	0x0B
+#define HIT_INVALIDATE_S	0x13
+#define CACHE_BARRIER		0x14
+#define HIT_WRITEBACK_INV_S	0x17
+#define INDEX_LOAD_DATA_I	0x18
+#define INDEX_LOAD_DATA_D	0x19
+#define INDEX_LOAD_DATA_S	0x1b
+#define INDEX_STORE_DATA_I	0x1c
+#define INDEX_STORE_DATA_D	0x1d
+#define INDEX_STORE_DATA_S	0x1f
 
 #endif	/* __ASM_CACHEOPS_H */
diff --git a/arch/mips/include/asm/global_data.h b/arch/mips/include/asm/global_data.h
index 6e2cdc7..a735a8a 100644
--- a/arch/mips/include/asm/global_data.h
+++ b/arch/mips/include/asm/global_data.h
@@ -48,7 +48,7 @@
 	unsigned long	tbl;
 	unsigned long	lastinc;
 #endif
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	have_console;	/* serial_init() was called */
 #ifdef CONFIG_PRE_CONSOLE_BUFFER
 	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
diff --git a/arch/mips/include/asm/io.h b/arch/mips/include/asm/io.h
index 025012a..80eab75 100644
--- a/arch/mips/include/asm/io.h
+++ b/arch/mips/include/asm/io.h
@@ -120,12 +120,20 @@
  */
 extern inline phys_addr_t virt_to_phys(volatile void * address)
 {
+#ifndef CONFIG_64BIT
 	return CPHYSADDR(address);
+#else
+	return XPHYSADDR(address);
+#endif
 }
 
 extern inline void * phys_to_virt(unsigned long address)
 {
+#ifndef CONFIG_64BIT
 	return (void *)KSEG0ADDR(address);
+#else
+	return (void *)CKSEG0ADDR(address);
+#endif
 }
 
 /*
@@ -133,12 +141,20 @@
  */
 extern inline unsigned long virt_to_bus(volatile void * address)
 {
+#ifndef CONFIG_64BIT
 	return CPHYSADDR(address);
+#else
+	return XPHYSADDR(address);
+#endif
 }
 
 extern inline void * bus_to_virt(unsigned long address)
 {
+#ifndef CONFIG_64BIT
 	return (void *)KSEG0ADDR(address);
+#else
+	return (void *)CKSEG0ADDR(address);
+#endif
 }
 
 /*
diff --git a/arch/mips/include/asm/posix_types.h b/arch/mips/include/asm/posix_types.h
index 879aae2..4deac52 100644
--- a/arch/mips/include/asm/posix_types.h
+++ b/arch/mips/include/asm/posix_types.h
@@ -24,9 +24,15 @@
 typedef int		__kernel_ipc_pid_t;
 typedef int		__kernel_uid_t;
 typedef int		__kernel_gid_t;
+#if _MIPS_SZLONG != 64
 typedef unsigned int	__kernel_size_t;
 typedef int		__kernel_ssize_t;
 typedef int		__kernel_ptrdiff_t;
+#else
+typedef unsigned long	__kernel_size_t;
+typedef long		__kernel_ssize_t;
+typedef long		__kernel_ptrdiff_t;
+#endif
 typedef long		__kernel_time_t;
 typedef long		__kernel_suseconds_t;
 typedef long		__kernel_clock_t;
diff --git a/arch/mips/include/asm/u-boot.h b/arch/mips/include/asm/u-boot.h
index 590649a..5fa4a6a 100644
--- a/arch/mips/include/asm/u-boot.h
+++ b/arch/mips/include/asm/u-boot.h
@@ -32,7 +32,7 @@
 #define _U_BOOT_H_	1
 
 typedef struct bd_info {
-	int		bi_baudrate;	/* serial console baudrate */
+	unsigned int	bi_baudrate;	/* serial console baudrate */
 	unsigned long	bi_arch_number;	/* unique id for this board */
 	unsigned long	bi_boot_params;	/* where this board expects params */
 	unsigned long	bi_memstart;	/* start of DRAM memory */
diff --git a/arch/mips/lib/board.c b/arch/mips/lib/board.c
index b14b33e..7ddd778 100644
--- a/arch/mips/lib/board.c
+++ b/arch/mips/lib/board.c
@@ -266,8 +266,8 @@
 	/*
 	 * We have to relocate the command table manually
 	 */
-	fixup_cmdtable(&__u_boot_cmd_start,
-		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+	fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+			ll_entry_count(cmd_tbl_t, cmd));
 #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	/* there are some other pointer constants we must deal with */
diff --git a/arch/nds32/cpu/n1213/u-boot.lds b/arch/nds32/cpu/n1213/u-boot.lds
index 1903420..cef19c5 100644
--- a/arch/nds32/cpu/n1213/u-boot.lds
+++ b/arch/nds32/cpu/n1213/u-boot.lds
@@ -52,9 +52,11 @@
 	}
 
 	. = .;
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 
diff --git a/arch/nds32/include/asm/global_data.h b/arch/nds32/include/asm/global_data.h
index 94bd4c2..b1feb2c 100644
--- a/arch/nds32/include/asm/global_data.h
+++ b/arch/nds32/include/asm/global_data.h
@@ -44,7 +44,7 @@
 typedef	struct global_data {
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	have_console;	/* serial_init() was called */
 
 	unsigned long	reloc_off;	/* Relocation Offset */
diff --git a/arch/nds32/include/asm/u-boot.h b/arch/nds32/include/asm/u-boot.h
index b533fea..7b8d8e4 100644
--- a/arch/nds32/include/asm/u-boot.h
+++ b/arch/nds32/include/asm/u-boot.h
@@ -39,7 +39,7 @@
 #include <environment.h>
 
 typedef struct bd_info {
-	int		bi_baudrate;	/* serial console baudrate */
+	unsigned int	bi_baudrate;	/* serial console baudrate */
 	unsigned long	bi_arch_number;	/* unique id for this board */
 	unsigned long	bi_boot_params;	/* where this board expects params */
 	unsigned long	bi_memstart;	/* start of DRAM memory */
diff --git a/arch/nds32/lib/board.c b/arch/nds32/lib/board.c
index 89900fe..91395ca 100644
--- a/arch/nds32/lib/board.c
+++ b/arch/nds32/lib/board.c
@@ -320,8 +320,8 @@
 	/*
 	 * We have to relocate the command table manually
 	 */
-	fixup_cmdtable(&__u_boot_cmd_start,
-		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+	fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+			ll_entry_count(cmd_tbl_t, cmd));
 #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 	serial_initialize();
@@ -396,7 +396,7 @@
 	/* Initialize from environment */
 	load_addr = getenv_ulong("loadaddr", 16, load_addr);
 
-#ifdef BOARD_LATE_INIT
+#ifdef CONFIG_BOARD_LATE_INIT
 	board_late_init();
 #endif
 
diff --git a/arch/nios2/cpu/u-boot.lds b/arch/nios2/cpu/u-boot.lds
index 4856bd3..d0eb80d 100644
--- a/arch/nios2/cpu/u-boot.lds
+++ b/arch/nios2/cpu/u-boot.lds
@@ -45,13 +45,11 @@
 	 * the initialization code relocates the command table as
 	 * well -- admittedly, this is just pure laziness ;-)
 	 */
-	__u_boot_cmd_start = .;
-	.u_boot_cmd :
-	{
-	  *(.u_boot_cmd)
-	}
+
 	. = ALIGN(4);
-	__u_boot_cmd_end = .;
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	/* INIT DATA sections - "Small" data (see the gcc -G option)
 	 * is always gp-relative. Here we make all init data sections
diff --git a/arch/nios2/include/asm/global_data.h b/arch/nios2/include/asm/global_data.h
index 3b0d9e6..413b485 100644
--- a/arch/nios2/include/asm/global_data.h
+++ b/arch/nios2/include/asm/global_data.h
@@ -26,7 +26,7 @@
 typedef	struct	global_data {
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	cpu_clk;	/* CPU clock in Hz!		*/
 	unsigned long	have_console;	/* serial_init() was called */
 #ifdef CONFIG_PRE_CONSOLE_BUFFER
diff --git a/arch/nios2/include/asm/u-boot.h b/arch/nios2/include/asm/u-boot.h
index 315ef8b..e591237 100644
--- a/arch/nios2/include/asm/u-boot.h
+++ b/arch/nios2/include/asm/u-boot.h
@@ -39,7 +39,7 @@
 	unsigned long	bi_flashoffset; /* reserved area for startup monitor */
 	unsigned long	bi_sramstart;	/* start of SRAM memory */
 	unsigned long	bi_sramsize;	/* size	 of SRAM memory */
-	unsigned long	bi_baudrate;	/* Console Baudrate */
+	unsigned int	bi_baudrate;	/* Console Baudrate */
 } bd_t;
 
 /* For image.h:image_check_target_arch() */
diff --git a/arch/openrisc/include/asm/global_data.h b/arch/openrisc/include/asm/global_data.h
index 6a0c0cc..96f3f1c 100644
--- a/arch/openrisc/include/asm/global_data.h
+++ b/arch/openrisc/include/asm/global_data.h
@@ -35,7 +35,7 @@
 typedef struct global_data {
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	cpu_clk;	/* CPU clock in Hz! */
 	unsigned long	have_console;	/* serial_init() was called */
 	phys_size_t	ram_size;	/* RAM size */
diff --git a/arch/openrisc/include/asm/u-boot.h b/arch/openrisc/include/asm/u-boot.h
index 76b8132..f2f31d3 100644
--- a/arch/openrisc/include/asm/u-boot.h
+++ b/arch/openrisc/include/asm/u-boot.h
@@ -32,7 +32,7 @@
 #define _U_BOOT_H_
 
 typedef struct bd_info {
-	unsigned long	bi_baudrate;	/* serial console baudrate */
+	unsigned int	bi_baudrate;	/* serial console baudrate */
 	unsigned long	bi_arch_number;	/* unique id for this board */
 	unsigned long	bi_boot_params;	/* where this board expects params */
 	unsigned long	bi_memstart;	/* start of DRAM memory */
diff --git a/arch/powerpc/cpu/74xx_7xx/traps.c b/arch/powerpc/cpu/74xx_7xx/traps.c
index 7ae81eb..a33e283 100644
--- a/arch/powerpc/cpu/74xx_7xx/traps.c
+++ b/arch/powerpc/cpu/74xx_7xx/traps.c
@@ -48,8 +48,7 @@
  * Trap & Exception support
  */
 
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
@@ -69,8 +68,7 @@
 	printf("\n");
 }
 
-void
-show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
@@ -100,16 +98,14 @@
 }
 
 
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
 	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
 }
 
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
 	unsigned long fixup;
 
@@ -152,8 +148,7 @@
 	panic("machine check");
 }
 
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -164,8 +159,7 @@
 	panic("Alignment Exception");
 }
 
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 	unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
 	int i, j;
@@ -190,8 +184,7 @@
 	panic("Program Check Exception");
 }
 
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -202,9 +195,7 @@
 	panic("Software Emulation Exception");
 }
 
-
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -218,8 +209,7 @@
 /* Probe an address by reading.  If not present, return -1, otherwise
  * return 0.
  */
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
 {
 #if 0
 	int	retval;
diff --git a/arch/powerpc/cpu/74xx_7xx/u-boot.lds b/arch/powerpc/cpu/74xx_7xx/u-boot.lds
index 24823cd..ecee439 100644
--- a/arch/powerpc/cpu/74xx_7xx/u-boot.lds
+++ b/arch/powerpc/cpu/74xx_7xx/u-boot.lds
@@ -62,9 +62,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/arch/powerpc/cpu/mpc512x/traps.c b/arch/powerpc/cpu/mpc512x/traps.c
index 786f4a5..15468e5 100644
--- a/arch/powerpc/cpu/mpc512x/traps.c
+++ b/arch/powerpc/cpu/mpc512x/traps.c
@@ -47,68 +47,65 @@
  * Trap & Exception support
  */
 
-void
-print_backtrace (unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
 
-	puts ("Call backtrace: ");
+	puts("Call backtrace: ");
 	while (sp) {
 		if ((uint)sp > END_OF_MEM)
 			break;
 
 		i = sp[1];
 		if (cnt++ % 7 == 0)
-			putc ('\n');
-		printf ("%08lX ", i);
+			putc('\n');
+		printf("%08lX ", i);
 		if (cnt > 32) break;
 		sp = (unsigned long *) *sp;
 	}
-	putc ('\n');
+	putc('\n');
 }
 
-void show_regs (struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
-	printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
 	       regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
-	printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+	printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
 	       regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
 	       regs->msr & MSR_FP ? 1 : 0,regs->msr & MSR_ME ? 1 : 0,
 	       regs->msr & MSR_IR ? 1 : 0,
 	       regs->msr & MSR_DR ? 1 : 0);
 
-	putc ('\n');
+	putc('\n');
 	for (i = 0;  i < 32;  i++) {
 		if ((i % 8) == 0) {
-			printf ("GPR%02d: ", i);
+			printf("GPR%02d: ", i);
 		}
 
-		printf ("%08lX ", regs->gpr[i]);
+		printf("%08lX ", regs->gpr[i]);
 		if ((i % 8) == 7) {
-			putc ('\n');
+			putc('\n');
 		}
 	}
 }
 
 
-void
-_exception (int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
-	show_regs (regs);
-	print_backtrace ((unsigned long *)regs->gpr[1]);
-	panic ("Exception at pc %lx signal %d", regs->nip,signr);
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Exception at pc %lx signal %d", regs->nip, signr);
 }
 
 
-void
-MachineCheckException (struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
-	unsigned long fixup;
+	unsigned long fixup = search_exception_table(regs->nip);
 
-	if ((fixup = search_exception_table (regs->nip)) != 0) {
+	if (fixup) {
 		regs->nip = fixup;
 		return;
 	}
@@ -118,95 +115,90 @@
 		return;
 #endif
 
-	puts ("Machine check.\nCaused by (from msr): ");
-	printf ("regs %p ",regs);
+	puts("Machine check.\nCaused by (from msr): ");
+	printf("regs %p ", regs);
 	switch (regs->msr & 0x00FF0000) {
 	case (0x80000000 >> 10):
-		puts ("Instruction cache parity signal\n");
+		puts("Instruction cache parity signal\n");
 		break;
 	case (0x80000000 >> 11):
-		puts ("Data cache parity signal\n");
+		puts("Data cache parity signal\n");
 		break;
 	case (0x80000000 >> 12):
-		puts ("Machine check signal\n");
+		puts("Machine check signal\n");
 		break;
 	case (0x80000000 >> 13):
-		puts ("Transfer error ack signal\n");
+		puts("Transfer error ack signal\n");
 		break;
 	case (0x80000000 >> 14):
-		puts ("Data parity signal\n");
+		puts("Data parity signal\n");
 		break;
 	case (0x80000000 >> 15):
-		puts ("Address parity signal\n");
+		puts("Address parity signal\n");
 		break;
 	default:
-		puts ("Unknown values in msr\n");
+		puts("Unknown values in msr\n");
 	}
-	show_regs (regs);
-	print_backtrace ((unsigned long *)regs->gpr[1]);
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
 
-	panic ("machine check");
+	panic("machine check");
 }
 
-void
-AlignmentException (struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 #ifdef CONFIG_CMD_KGDB
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
-	show_regs (regs);
-	print_backtrace ((unsigned long *)regs->gpr[1]);
-	panic ("Alignment Exception");
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Alignment Exception");
 }
 
-void
-ProgramCheckException (struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 #ifdef CONFIG_CMD_KGDB
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
-	show_regs (regs);
-	print_backtrace ((unsigned long *)regs->gpr[1]);
-	panic ("Program Check Exception");
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Program Check Exception");
 }
 
-void
-SoftEmuException (struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
 {
 #ifdef CONFIG_CMD_KGDB
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
-	show_regs (regs);
-	print_backtrace ((unsigned long *)regs->gpr[1]);
-	panic ("Software Emulation Exception");
+	show_regs(regs);
+	print_backtrace((unsigned long *)regs->gpr[1]);
+	panic("Software Emulation Exception");
 }
 
 
-void
-UnknownException (struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 #ifdef CONFIG_CMD_KGDB
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
-	printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
 	       regs->nip, regs->msr, regs->trap);
-	_exception (0, regs);
+	_exception(0, regs);
 }
 
 #ifdef CONFIG_CMD_BEDBUG
-extern void do_bedbug_breakpoint (struct pt_regs *);
+extern void do_bedbug_breakpoint(struct pt_regs *);
 #endif
 
-void
-DebugException (struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
 {
-	printf ("Debugger trap at @ %lx\n", regs->nip );
-	show_regs (regs);
+	printf("Debugger trap at @ %lx\n", regs->nip);
+	show_regs(regs);
 #ifdef CONFIG_CMD_BEDBUG
-	do_bedbug_breakpoint (regs);
+	do_bedbug_breakpoint(regs);
 #endif
 }
diff --git a/arch/powerpc/cpu/mpc512x/u-boot.lds b/arch/powerpc/cpu/mpc512x/u-boot.lds
index 7a4d927..7faefba 100644
--- a/arch/powerpc/cpu/mpc512x/u-boot.lds
+++ b/arch/powerpc/cpu/mpc512x/u-boot.lds
@@ -57,9 +57,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/arch/powerpc/cpu/mpc5xx/serial.c b/arch/powerpc/cpu/mpc5xx/serial.c
index 6ef8be8..732856a 100644
--- a/arch/powerpc/cpu/mpc5xx/serial.c
+++ b/arch/powerpc/cpu/mpc5xx/serial.c
@@ -161,21 +161,13 @@
 #endif
 }
 
-static void mpc5xx_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s);
-		++s;
-	}
-}
-
 static struct serial_device mpc5xx_serial_drv = {
 	.name	= "mpc5xx_serial",
 	.start	= mpc5xx_serial_init,
 	.stop	= NULL,
 	.setbrg	= mpc5xx_serial_setbrg,
 	.putc	= mpc5xx_serial_putc,
-	.puts	= mpc5xx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mpc5xx_serial_getc,
 	.tstc	= mpc5xx_serial_tstc,
 };
diff --git a/arch/powerpc/cpu/mpc5xx/traps.c b/arch/powerpc/cpu/mpc5xx/traps.c
index e3ce11b..90da73b 100644
--- a/arch/powerpc/cpu/mpc5xx/traps.c
+++ b/arch/powerpc/cpu/mpc5xx/traps.c
@@ -52,7 +52,7 @@
 /*
  * Print stack backtrace
  */
-void print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
@@ -75,7 +75,7 @@
 /*
  * Print current registers
  */
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
@@ -105,7 +105,7 @@
 /*
  * General exception handler routine
  */
-void _exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
diff --git a/arch/powerpc/cpu/mpc5xx/u-boot.lds b/arch/powerpc/cpu/mpc5xx/u-boot.lds
index e02b213..c91e146 100644
--- a/arch/powerpc/cpu/mpc5xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc5xx/u-boot.lds
@@ -65,9 +65,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/arch/powerpc/cpu/mpc5xxx/traps.c b/arch/powerpc/cpu/mpc5xxx/traps.c
index 5972f34..438f8d3 100644
--- a/arch/powerpc/cpu/mpc5xxx/traps.c
+++ b/arch/powerpc/cpu/mpc5xxx/traps.c
@@ -49,8 +49,7 @@
  * Trap & Exception support
  */
 
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
@@ -70,7 +69,7 @@
 	printf("\n");
 }
 
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
@@ -98,16 +97,14 @@
 }
 
 
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
 	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
 }
 
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
 	unsigned long fixup;
 
@@ -152,8 +149,7 @@
 	panic("machine check");
 }
 
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -164,8 +160,7 @@
 	panic("Alignment Exception");
 }
 
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -176,8 +171,7 @@
 	panic("Program Check Exception");
 }
 
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -189,8 +183,7 @@
 }
 
 
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -205,8 +198,7 @@
 extern void do_bedbug_breakpoint(struct pt_regs *);
 #endif
 
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
 {
 
   printf("Debugger trap at @ %lx\n", regs->nip );
@@ -219,8 +211,7 @@
 /* Probe an address by reading.  If not present, return -1, otherwise
  * return 0.
  */
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
 {
 #if 0
 	int	retval;
diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
index 0c6c54e..ac7844d 100644
--- a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
+++ b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
@@ -66,10 +66,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot.lds b/arch/powerpc/cpu/mpc5xxx/u-boot.lds
index 5dcaec1..1f46ead 100644
--- a/arch/powerpc/cpu/mpc5xxx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc5xxx/u-boot.lds
@@ -60,9 +60,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/arch/powerpc/cpu/mpc8220/traps.c b/arch/powerpc/cpu/mpc8220/traps.c
index 13894c9..19d6cb5 100644
--- a/arch/powerpc/cpu/mpc8220/traps.c
+++ b/arch/powerpc/cpu/mpc8220/traps.c
@@ -39,7 +39,7 @@
 #include <asm/processor.h>
 
 /* Returns 0 if exception not found and fixup otherwise.  */
-extern unsigned long search_exception_table (unsigned long);
+extern unsigned long search_exception_table(unsigned long);
 
 /* THIS NEEDS CHANGING to use the board info structure.
 */
@@ -49,171 +49,166 @@
  * Trap & Exception support
  */
 
-void print_backtrace (unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
 
-	printf ("Call backtrace: ");
+	printf("Call backtrace: ");
 	while (sp) {
 		if ((uint) sp > END_OF_MEM)
 			break;
 
 		i = sp[1];
 		if (cnt++ % 7 == 0)
-			printf ("\n");
-		printf ("%08lX ", i);
+			printf("\n");
+		printf("%08lX ", i);
 		if (cnt > 32)
 			break;
 		sp = (unsigned long *) *sp;
 	}
-	printf ("\n");
+	printf("\n");
 }
 
-void show_regs (struct pt_regs *regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
-	printf ("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
+	printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n",
 		regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar);
-	printf ("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
+	printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n",
 		regs->msr,
 		regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0,
 		regs->msr & MSR_FP ? 1 : 0, regs->msr & MSR_ME ? 1 : 0,
 		regs->msr & MSR_IR ? 1 : 0, regs->msr & MSR_DR ? 1 : 0);
 
-	printf ("\n");
+	printf("\n");
 	for (i = 0; i < 32; i++) {
 		if ((i % 8) == 0) {
-			printf ("GPR%02d: ", i);
+			printf("GPR%02d: ", i);
 		}
 
-		printf ("%08lX ", regs->gpr[i]);
+		printf("%08lX ", regs->gpr[i]);
 		if ((i % 8) == 7) {
-			printf ("\n");
+			printf("\n");
 		}
 	}
 }
 
 
-void _exception (int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
-	show_regs (regs);
-	print_backtrace ((unsigned long *) regs->gpr[1]);
-	panic ("Exception in kernel pc %lx signal %d", regs->nip, signr);
+	show_regs(regs);
+	print_backtrace((unsigned long *) regs->gpr[1]);
+	panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
 }
 
-void MachineCheckException (struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
-	unsigned long fixup;
+	unsigned long fixup = search_exception_table(regs->nip);
 
 	/* Probing PCI using config cycles cause this exception
 	 * when a device is not present.  Catch it and return to
 	 * the PCI exception handler.
 	 */
-	if ((fixup = search_exception_table (regs->nip)) != 0) {
+	if (fixup) {
 		regs->nip = fixup;
 		return;
 	}
 #if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler
-	    && (*debugger_exception_handler) (regs))
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
 
-	printf ("Machine check in kernel mode.\n");
-	printf ("Caused by (from msr): ");
-	printf ("regs %p ", regs);
+	printf("Machine check in kernel mode.\n");
+	printf("Caused by (from msr): ");
+	printf("regs %p ", regs);
 	/* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */
 	switch (regs->msr & 0x000F0000) {
 	case (0x80000000 >> 12):
-		printf ("Machine check signal - probably due to mm fault\n"
+		printf("Machine check signal - probably due to mm fault\n"
 			"with mmu off\n");
 		break;
 	case (0x80000000 >> 13):
-		printf ("Transfer error ack signal\n");
+		printf("Transfer error ack signal\n");
 		break;
 	case (0x80000000 >> 14):
-		printf ("Data parity signal\n");
+		printf("Data parity signal\n");
 		break;
 	case (0x80000000 >> 15):
-		printf ("Address parity signal\n");
+		printf("Address parity signal\n");
 		break;
 	default:
-		printf ("Unknown values in msr\n");
+		printf("Unknown values in msr\n");
 	}
-	show_regs (regs);
-	print_backtrace ((unsigned long *) regs->gpr[1]);
-	panic ("machine check");
+	show_regs(regs);
+	print_backtrace((unsigned long *) regs->gpr[1]);
+	panic("machine check");
 }
 
-void AlignmentException (struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler
-	    && (*debugger_exception_handler) (regs))
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
-	show_regs (regs);
-	print_backtrace ((unsigned long *) regs->gpr[1]);
-	panic ("Alignment Exception");
+	show_regs(regs);
+	print_backtrace((unsigned long *) regs->gpr[1]);
+	panic("Alignment Exception");
 }
 
-void ProgramCheckException (struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler
-	    && (*debugger_exception_handler) (regs))
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
-	show_regs (regs);
-	print_backtrace ((unsigned long *) regs->gpr[1]);
-	panic ("Program Check Exception");
+	show_regs(regs);
+	print_backtrace((unsigned long *) regs->gpr[1]);
+	panic("Program Check Exception");
 }
 
-void SoftEmuException (struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler
-	    && (*debugger_exception_handler) (regs))
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
-	show_regs (regs);
-	print_backtrace ((unsigned long *) regs->gpr[1]);
-	panic ("Software Emulation Exception");
+	show_regs(regs);
+	print_backtrace((unsigned long *) regs->gpr[1]);
+	panic("Software Emulation Exception");
 }
 
 
-void UnknownException (struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
-	if (debugger_exception_handler
-	    && (*debugger_exception_handler) (regs))
+	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
 		return;
 #endif
-	printf ("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
+	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
 		regs->nip, regs->msr, regs->trap);
-	_exception (0, regs);
+	_exception(0, regs);
 }
 
 #if defined(CONFIG_CMD_BEDBUG)
-extern void do_bedbug_breakpoint (struct pt_regs *);
+extern void do_bedbug_breakpoint(struct pt_regs *);
 #endif
 
-void DebugException (struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
 {
 
-	printf ("Debugger trap at @ %lx\n", regs->nip);
-	show_regs (regs);
+	printf("Debugger trap at @ %lx\n", regs->nip);
+	show_regs(regs);
 #if defined(CONFIG_CMD_BEDBUG)
-	do_bedbug_breakpoint (regs);
+	do_bedbug_breakpoint(regs);
 #endif
 }
 
 /* Probe an address by reading.  If not present, return -1, otherwise
  * return 0.
  */
-int addr_probe (uint * addr)
+int addr_probe(uint *addr)
 {
 #if 0
 	int retval;
diff --git a/arch/powerpc/cpu/mpc8220/u-boot.lds b/arch/powerpc/cpu/mpc8220/u-boot.lds
index 39bb42e..c147954 100644
--- a/arch/powerpc/cpu/mpc8220/u-boot.lds
+++ b/arch/powerpc/cpu/mpc8220/u-boot.lds
@@ -59,9 +59,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/arch/powerpc/cpu/mpc8220/uart.c b/arch/powerpc/cpu/mpc8220/uart.c
index 25d4472..772528f 100644
--- a/arch/powerpc/cpu/mpc8220/uart.c
+++ b/arch/powerpc/cpu/mpc8220/uart.c
@@ -84,13 +84,6 @@
 	psc->xmitbuf[0] = c;
 }
 
-static void mpc8220_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static int mpc8220_serial_getc(void)
 {
 	volatile psc8220_t *psc = (psc8220_t *) PSC_BASE;
@@ -132,7 +125,7 @@
 	.stop	= NULL,
 	.setbrg	= mpc8220_serial_setbrg,
 	.putc	= mpc8220_serial_putc,
-	.puts	= mpc8220_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mpc8220_serial_getc,
 	.tstc	= mpc8220_serial_tstc,
 };
diff --git a/arch/powerpc/cpu/mpc824x/cpu_init.c b/arch/powerpc/cpu/mpc824x/cpu_init.c
index 395f776..cfc665d 100644
--- a/arch/powerpc/cpu/mpc824x/cpu_init.c
+++ b/arch/powerpc/cpu/mpc824x/cpu_init.c
@@ -63,7 +63,7 @@
 cpu_init_f (void)
 {
 /* MOUSSE board is initialized in asm */
-#if !defined(CONFIG_MOUSSE) && !defined(CONFIG_BMW)
+#if !defined(CONFIG_MOUSSE)
     register unsigned long val;
     CONFIG_WRITE_HALFWORD(PCICR, 0x06); /* Bus Master, respond to PCI memory space acesses*/
 /*    CONFIG_WRITE_HALFWORD(PCISR, 0xffff); */ /*reset PCISR*/
@@ -321,7 +321,7 @@
 	CONFIG_WRITE_WORD(MCCR1, val | MCCR1_MEMGO); /* set memory access going */
 	__asm__ __volatile__("eieio");
 
-#endif /* !CONFIG_MOUSSE && !CONFIG_BMW */
+#endif /* !CONFIG_MOUSSE */
 }
 
 
diff --git a/arch/powerpc/cpu/mpc824x/start.S b/arch/powerpc/cpu/mpc824x/start.S
index 70db73e..076df70 100644
--- a/arch/powerpc/cpu/mpc824x/start.S
+++ b/arch/powerpc/cpu/mpc824x/start.S
@@ -113,9 +113,6 @@
 
 
 in_flash:
-#if defined(CONFIG_BMW)
-	bl early_init_f /* Must be ASM: no stack yet! */
-#endif
 	/*
 	 * Setup BATs - cannot be done in C since we don't have a stack yet
 	 */
@@ -126,7 +123,7 @@
 	mfmsr	r3
 	ori	r3, r3, (MSR_IR | MSR_DR)
 	mtmsr	r3
-#if !defined(CONFIG_BMW)
+
 	/* Enable and invalidate data cache.
 	 */
 	mfspr	r3, HID0
@@ -158,7 +155,7 @@
 	ori	r3, r3, 0x0080
 	sync
 	mtspr	1011, r3
-#endif /* !CONFIG_BMW */
+
 	/*
 	 * Thisk the stack pointer *somewhere* sensible. Doesnt
 	 * matter much where as we'll move it when we relocate
@@ -498,7 +495,6 @@
 	bdnz	3b
 
 4:
-#if !defined(CONFIG_BMW)
 /* Unlock the data cache and invalidate locked area */
 	xor	r0, r0, r0
 	mtspr	1011, r0
@@ -510,7 +506,6 @@
 	dcbi	r0, r4
 	addi	r4, r4, 32
 	bdnz	41b
-#endif
 
 /*
  * Now flush the cache: note that we must start from a cache aligned
diff --git a/arch/powerpc/cpu/mpc824x/traps.c b/arch/powerpc/cpu/mpc824x/traps.c
index 163b983..9bcdd8f 100644
--- a/arch/powerpc/cpu/mpc824x/traps.c
+++ b/arch/powerpc/cpu/mpc824x/traps.c
@@ -46,8 +46,7 @@
  * Trap & Exception support
  */
 
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
@@ -67,7 +66,7 @@
 	printf("\n");
 }
 
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
@@ -95,16 +94,14 @@
 }
 
 
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
 	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
 }
 
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
 	unsigned long fixup;
 
@@ -142,24 +139,21 @@
 	panic("machine check");
 }
 
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
 	panic("Alignment Exception");
 }
 
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
 	panic("Program Check Exception");
 }
 
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
@@ -167,8 +161,7 @@
 }
 
 
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 	printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
 	       regs->nip, regs->msr, regs->trap);
@@ -179,8 +172,7 @@
 extern void do_bedbug_breakpoint(struct pt_regs *);
 #endif
 
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
 {
 
   printf("Debugger trap at @ %lx\n", regs->nip );
@@ -193,8 +185,7 @@
 /* Probe an address by reading.  If not present, return -1, otherwise
  * return 0.
  */
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
 {
 #if 0
 	int	retval;
diff --git a/arch/powerpc/cpu/mpc824x/u-boot.lds b/arch/powerpc/cpu/mpc824x/u-boot.lds
index b30ce76..a713012 100644
--- a/arch/powerpc/cpu/mpc824x/u-boot.lds
+++ b/arch/powerpc/cpu/mpc824x/u-boot.lds
@@ -60,9 +60,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/arch/powerpc/cpu/mpc8260/serial_scc.c b/arch/powerpc/cpu/mpc8260/serial_scc.c
index ab77558..ab2a2b2 100644
--- a/arch/powerpc/cpu/mpc8260/serial_scc.c
+++ b/arch/powerpc/cpu/mpc8260/serial_scc.c
@@ -217,13 +217,6 @@
 	tbdf->cbd_sc |= BD_SC_READY;
 }
 
-static void mpc8260_scc_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static int mpc8260_scc_serial_getc(void)
 {
 	volatile cbd_t		*rbdf;
@@ -267,7 +260,7 @@
 	.stop	= NULL,
 	.setbrg	= mpc8260_scc_serial_setbrg,
 	.putc	= mpc8260_scc_serial_putc,
-	.puts	= mpc8260_scc_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mpc8260_scc_serial_getc,
 	.tstc	= mpc8260_scc_serial_tstc,
 };
diff --git a/arch/powerpc/cpu/mpc8260/serial_smc.c b/arch/powerpc/cpu/mpc8260/serial_smc.c
index 7edde9a..feba1f6 100644
--- a/arch/powerpc/cpu/mpc8260/serial_smc.c
+++ b/arch/powerpc/cpu/mpc8260/serial_smc.c
@@ -216,13 +216,6 @@
 	rtx->txbd.cbd_sc |= BD_SC_READY;
 }
 
-static void mpc8260_smc_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static int mpc8260_smc_serial_getc(void)
 {
 	volatile smc_uart_t	*up;
@@ -270,7 +263,7 @@
 	.stop	= NULL,
 	.setbrg	= mpc8260_smc_serial_setbrg,
 	.putc	= mpc8260_smc_serial_putc,
-	.puts	= mpc8260_smc_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mpc8260_smc_serial_getc,
 	.tstc	= mpc8260_smc_serial_tstc,
 };
diff --git a/arch/powerpc/cpu/mpc8260/traps.c b/arch/powerpc/cpu/mpc8260/traps.c
index c116cdf..e1e6845 100644
--- a/arch/powerpc/cpu/mpc8260/traps.c
+++ b/arch/powerpc/cpu/mpc8260/traps.c
@@ -49,8 +49,7 @@
  * Trap & Exception support
  */
 
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
@@ -70,7 +69,7 @@
 	putc ('\n');
 }
 
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
@@ -96,8 +95,7 @@
 }
 
 
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
@@ -122,8 +120,7 @@
 }
 #endif
 
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
 	unsigned long fixup;
 
@@ -180,8 +177,7 @@
 	panic("machine check");
 }
 
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -192,8 +188,7 @@
 	panic("Alignment Exception");
 }
 
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -204,8 +199,7 @@
 	panic("Program Check Exception");
 }
 
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -217,8 +211,7 @@
 }
 
 
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -233,8 +226,7 @@
 extern void do_bedbug_breakpoint(struct pt_regs *);
 #endif
 
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
 {
 
   printf("Debugger trap at @ %lx\n", regs->nip );
@@ -247,8 +239,7 @@
 /* Probe an address by reading.  If not present, return -1, otherwise
  * return 0.
  */
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
 {
 #if 0
 	int	retval;
diff --git a/arch/powerpc/cpu/mpc8260/u-boot.lds b/arch/powerpc/cpu/mpc8260/u-boot.lds
index 60b71ec..42385fc 100644
--- a/arch/powerpc/cpu/mpc8260/u-boot.lds
+++ b/arch/powerpc/cpu/mpc8260/u-boot.lds
@@ -59,9 +59,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/arch/powerpc/cpu/mpc83xx/cpu.c b/arch/powerpc/cpu/mpc83xx/cpu.c
index 6635109..e64b0c3 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu.c
@@ -56,6 +56,7 @@
 		u32 partid;
 	} cpu_type_list [] = {
 		CPU_TYPE_ENTRY(8308),
+		CPU_TYPE_ENTRY(8309),
 		CPU_TYPE_ENTRY(8311),
 		CPU_TYPE_ENTRY(8313),
 		CPU_TYPE_ENTRY(8314),
diff --git a/arch/powerpc/cpu/mpc83xx/cpu_init.c b/arch/powerpc/cpu/mpc83xx/cpu_init.c
index 76afba5..20d0600 100644
--- a/arch/powerpc/cpu/mpc83xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc83xx/cpu_init.c
@@ -268,6 +268,9 @@
 #ifdef CONFIG_SYS_SICRL
 	__raw_writel(CONFIG_SYS_SICRL, &im->sysconf.sicrl);
 #endif
+#ifdef CONFIG_SYS_GPR1
+	__raw_writel(CONFIG_SYS_GPR1, &im->sysconf.gpr1);
+#endif
 #ifdef CONFIG_SYS_DDRCDR /* DDR control driver register */
 	__raw_writel(CONFIG_SYS_DDRCDR, &im->sysconf.ddrcdr);
 #endif
diff --git a/arch/powerpc/cpu/mpc83xx/fdt.c b/arch/powerpc/cpu/mpc83xx/fdt.c
index 028c8f0..1f54781 100644
--- a/arch/powerpc/cpu/mpc83xx/fdt.c
+++ b/arch/powerpc/cpu/mpc83xx/fdt.c
@@ -88,7 +88,8 @@
 				u32 tmp[] = { 32, 0x8, 33, 0x8, 34, 0x8 };
 
 				path = fdt_path_offset(blob, prop);
-				prop = fdt_getprop(blob, path, "interrupts", 0);
+				prop = fdt_getprop(blob, path, "interrupts",
+						   NULL);
 				if (prop)
 					fdt_setprop(blob, path, "interrupts",
 						    &tmp, sizeof(tmp));
@@ -100,7 +101,8 @@
 				u32 tmp[] = { 35, 0x8, 36, 0x8, 37, 0x8 };
 
 				path = fdt_path_offset(blob, prop);
-				prop = fdt_getprop(blob, path, "interrupts", 0);
+				prop = fdt_getprop(blob, path, "interrupts",
+						   NULL);
 				if (prop)
 					fdt_setprop(blob, path, "interrupts",
 						    &tmp, sizeof(tmp));
diff --git a/arch/powerpc/cpu/mpc83xx/speed.c b/arch/powerpc/cpu/mpc83xx/speed.c
index f78099d..b8c05d1 100644
--- a/arch/powerpc/cpu/mpc83xx/speed.c
+++ b/arch/powerpc/cpu/mpc83xx/speed.c
@@ -52,7 +52,7 @@
 	mult_t vco_divider;
 } corecnf_t;
 
-corecnf_t corecnf_tab[] = {
+static corecnf_t corecnf_tab[] = {
 	{_byp, _byp},		/* 0x00 */
 	{_byp, _byp},		/* 0x01 */
 	{_byp, _byp},		/* 0x02 */
@@ -105,6 +105,8 @@
 	u32 tsec1_clk;
 	u32 tsec2_clk;
 	u32 usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+	u32 usbdr_clk;
 #endif
 #ifdef CONFIG_MPC834x
 	u32 usbmph_clk;
@@ -120,14 +122,16 @@
 #if defined(CONFIG_FSL_ESDHC)
 	u32 sdhc_clk;
 #endif
+#if !defined(CONFIG_MPC8309)
 	u32 enc_clk;
+#endif
 	u32 lbiu_clk;
 	u32 lclk_clk;
 	u32 mem_clk;
 #if defined(CONFIG_MPC8360)
 	u32 mem_sec_clk;
 #endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_QE)
 	u32 qepmf;
 	u32 qepdf;
 	u32 qe_clk;
@@ -185,7 +189,10 @@
 		/* unkown SCCR_TSEC1CM value */
 		return -2;
 	}
+#endif
 
+#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x) || \
+	defined(CONFIG_MPC834x) || defined(CONFIG_MPC837x)
 	switch ((sccr & SCCR_USBDRCM) >> SCCR_USBDRCM_SHIFT) {
 	case 0:
 		usbdr_clk = 0;
@@ -260,6 +267,7 @@
 		return -6;
 	}
 #endif
+#if !defined(CONFIG_MPC8309)
 	switch ((sccr & SCCR_ENCCM) >> SCCR_ENCCM_SHIFT) {
 	case 0:
 		enc_clk = 0;
@@ -277,6 +285,7 @@
 		/* unkown SCCR_ENCCM value */
 		return -7;
 	}
+#endif
 
 #if defined(CONFIG_FSL_ESDHC)
 	switch ((sccr & SCCR_SDHCCM) >> SCCR_SDHCCM_SHIFT) {
@@ -329,6 +338,8 @@
 	i2c1_clk = sdhc_clk;
 #elif defined(CONFIG_MPC837x)
 	i2c1_clk = enc_clk;
+#elif defined(CONFIG_MPC8309)
+	i2c1_clk = csb_clk;
 #endif
 #if !defined(CONFIG_MPC832x)
 	i2c2_clk = csb_clk; /* i2c-2 clk is equal to csb clk */
@@ -444,7 +455,7 @@
 		return -13;
 	}
 
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_QE)
 	qepmf = (im->clk.spmr & SPMR_CEPMF) >> SPMR_CEPMF_SHIFT;
 	qepdf = (im->clk.spmr & SPMR_CEPDF) >> SPMR_CEPDF_SHIFT;
 	qe_clk = (pci_sync_in * qepmf) / (1 + qepdf);
@@ -457,6 +468,8 @@
 	gd->tsec1_clk = tsec1_clk;
 	gd->tsec2_clk = tsec2_clk;
 	gd->usbdr_clk = usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+	gd->usbdr_clk = usbdr_clk;
 #endif
 #if defined(CONFIG_MPC834x)
 	gd->usbmph_clk = usbmph_clk;
@@ -472,14 +485,16 @@
 #if !defined(CONFIG_MPC832x)
 	gd->i2c2_clk = i2c2_clk;
 #endif
+#if !defined(CONFIG_MPC8309)
 	gd->enc_clk = enc_clk;
+#endif
 	gd->lbiu_clk = lbiu_clk;
 	gd->lclk_clk = lclk_clk;
 	gd->mem_clk = mem_clk;
 #if defined(CONFIG_MPC8360)
 	gd->mem_sec_clk = mem_sec_clk;
 #endif
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_QE)
 	gd->qe_clk = qe_clk;
 	gd->brg_clk = brg_clk;
 #endif
@@ -516,14 +531,14 @@
 	return gd->mem_clk;
 }
 
-int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_clocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	char buf[32];
 
 	printf("Clock configuration:\n");
 	printf("  Core:                %-4s MHz\n", strmhz(buf, gd->core_clk));
 	printf("  Coherent System Bus: %-4s MHz\n", strmhz(buf, gd->csb_clk));
-#if defined(CONFIG_MPC8360) || defined(CONFIG_MPC832x)
+#if defined(CONFIG_QE)
 	printf("  QE:                  %-4s MHz\n", strmhz(buf, gd->qe_clk));
 	printf("  BRG:                 %-4s MHz\n", strmhz(buf, gd->brg_clk));
 #endif
@@ -533,7 +548,9 @@
 #if defined(CONFIG_MPC8360)
 	printf("  DDR Secondary:       %-4s MHz\n", strmhz(buf, gd->mem_sec_clk));
 #endif
+#if !defined(CONFIG_MPC8309)
 	printf("  SEC:                 %-4s MHz\n", strmhz(buf, gd->enc_clk));
+#endif
 	printf("  I2C1:                %-4s MHz\n", strmhz(buf, gd->i2c1_clk));
 #if !defined(CONFIG_MPC832x)
 	printf("  I2C2:                %-4s MHz\n", strmhz(buf, gd->i2c2_clk));
@@ -549,6 +566,8 @@
 	printf("  TSEC1:               %-4s MHz\n", strmhz(buf, gd->tsec1_clk));
 	printf("  TSEC2:               %-4s MHz\n", strmhz(buf, gd->tsec2_clk));
 	printf("  USB DR:              %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
+#elif defined(CONFIG_MPC8309)
+	printf("  USB DR:              %-4s MHz\n", strmhz(buf, gd->usbdr_clk));
 #endif
 #if defined(CONFIG_MPC834x)
 	printf("  USB MPH:             %-4s MHz\n", strmhz(buf, gd->usbmph_clk));
diff --git a/arch/powerpc/cpu/mpc83xx/traps.c b/arch/powerpc/cpu/mpc83xx/traps.c
index 9d71b8b..53a1062 100644
--- a/arch/powerpc/cpu/mpc83xx/traps.c
+++ b/arch/powerpc/cpu/mpc83xx/traps.c
@@ -42,8 +42,7 @@
  * Trap & Exception support
  */
 
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
@@ -63,7 +62,7 @@
 	putc ('\n');
 }
 
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
@@ -89,8 +88,7 @@
 }
 
 
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
@@ -114,8 +112,7 @@
 }
 #endif
 
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
 	unsigned long fixup;
 
@@ -174,8 +171,7 @@
 	panic("machine check");
 }
 
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -186,8 +182,7 @@
 	panic("Alignment Exception");
 }
 
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -198,8 +193,7 @@
 	panic("Program Check Exception");
 }
 
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -211,8 +205,7 @@
 }
 
 
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -227,8 +220,7 @@
 extern void do_bedbug_breakpoint(struct pt_regs *);
 #endif
 
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
 {
 	printf("Debugger trap at @ %lx\n", regs->nip );
 	show_regs(regs);
@@ -240,8 +232,7 @@
 /* Probe an address by reading.  If not present, return -1, otherwise
  * return 0.
  */
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
 {
 #if 0
 	int	retval;
diff --git a/arch/powerpc/cpu/mpc83xx/u-boot.lds b/arch/powerpc/cpu/mpc83xx/u-boot.lds
index 2f4b9ad..d699def 100644
--- a/arch/powerpc/cpu/mpc83xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc83xx/u-boot.lds
@@ -58,9 +58,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 33e93c8..78c412d 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -66,6 +66,9 @@
 COBJS-$(CONFIG_PPC_P3041)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P4080)	+= ddr-gen3.o
 COBJS-$(CONFIG_PPC_P5020)	+= ddr-gen3.o
+COBJS-$(CONFIG_PPC_P5040)	+= ddr-gen3.o
+COBJS-$(CONFIG_PPC_T4240)	+= ddr-gen3.o
+COBJS-$(CONFIG_PPC_B4860)	+= ddr-gen3.o
 COBJS-$(CONFIG_BSC9131)		+= ddr-gen3.o
 
 COBJS-$(CONFIG_CPM2)	+= ether_fcc.o
@@ -80,10 +83,14 @@
 COBJS-$(CONFIG_PPC_P3041) += p3041_ids.o
 COBJS-$(CONFIG_PPC_P4080) += p4080_ids.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_ids.o
+COBJS-$(CONFIG_PPC_P5040) += p5040_ids.o
+COBJS-$(CONFIG_PPC_T4240) += t4240_ids.o
+COBJS-$(CONFIG_PPC_B4860) += b4860_ids.o
 
 COBJS-$(CONFIG_QE)	+= qe_io.o
 COBJS-$(CONFIG_CPM2)	+= serial_scc.o
-COBJS-$(CONFIG_FSL_CORENET) += fsl_corenet_serdes.o
+COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS1) += fsl_corenet_serdes.o
+COBJS-$(CONFIG_SYS_FSL_QORIQ_CHASSIS2) += fsl_corenet2_serdes.o
 
 # SoC specific SERDES support
 COBJS-$(CONFIG_MPC8536) += mpc8536_serdes.o
@@ -110,6 +117,9 @@
 COBJS-$(CONFIG_PPC_P3041) += p3041_serdes.o
 COBJS-$(CONFIG_PPC_P4080) += p4080_serdes.o
 COBJS-$(CONFIG_PPC_P5020) += p5020_serdes.o
+COBJS-$(CONFIG_PPC_P5040) += p5040_serdes.o
+COBJS-$(CONFIG_PPC_T4240) += t4240_serdes.o
+COBJS-$(CONFIG_PPC_B4860) += b4860_serdes.o
 
 COBJS	= $(COBJS-y)
 COBJS	+= cpu.o
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_ids.c b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
new file mode 100644
index 0000000..7d33731
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/b4860_ids.c
@@ -0,0 +1,141 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	/* dqrr liodn, frame data liodn, liodn off, sdest */
+	SET_QP_INFO(1, 27, 1, 0),
+	SET_QP_INFO(2, 28, 1, 0),
+	SET_QP_INFO(3, 29, 1, 1),
+	SET_QP_INFO(4, 30, 1, 1),
+	SET_QP_INFO(5, 31, 1, 2),
+	SET_QP_INFO(6, 32, 1, 2),
+	SET_QP_INFO(7, 33, 1, 3),
+	SET_QP_INFO(8, 34, 1, 3),
+	SET_QP_INFO(9, 35, 1, 0),
+	SET_QP_INFO(10, 36, 1, 0),
+	SET_QP_INFO(11, 37, 1, 1),
+	SET_QP_INFO(12, 38, 1, 1),
+	SET_QP_INFO(13, 39, 1, 2),
+	SET_QP_INFO(14, 40, 1, 2),
+	SET_QP_INFO(15, 41, 1, 3),
+	SET_QP_INFO(16, 42, 1, 3),
+	SET_QP_INFO(17, 43, 1, 0),
+	SET_QP_INFO(18, 44, 1, 0),
+	SET_QP_INFO(19, 45, 1, 1),
+	SET_QP_INFO(20, 46, 1, 1),
+	SET_QP_INFO(21, 47, 1, 2),
+	SET_QP_INFO(22, 48, 1, 2),
+	SET_QP_INFO(23, 49, 1, 3),
+	SET_QP_INFO(24, 50, 1, 3),
+	SET_QP_INFO(25, 51, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+	SET_SRIO_LIODN_1(1, 307),
+	SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_LIODN(62),
+	SET_BMAN_LIODN(63),
+#endif
+
+	SET_SDHC_LIODN(1, 552),
+
+	SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+
+	SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+
+	SET_DMA_LIODN(1, 147),
+	SET_DMA_LIODN(2, 227),
+
+	SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+	SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+	SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+	SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+	/* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+	SET_FMAN_RX_1G_LIODN(1, 0, 88),
+	SET_FMAN_RX_1G_LIODN(1, 1, 89),
+	SET_FMAN_RX_1G_LIODN(1, 2, 90),
+	SET_FMAN_RX_1G_LIODN(1, 3, 91),
+	SET_FMAN_RX_1G_LIODN(1, 4, 92),
+	SET_FMAN_RX_1G_LIODN(1, 5, 93),
+	SET_FMAN_RX_10G_LIODN(1, 0, 94),
+	SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+	SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+	SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+	SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+	SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+	SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+	SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+	SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+	SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+	SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+	SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+	SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+	SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+	SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+	SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+	SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+	SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+	/* Set RMan block 0-3 liodn offset */
+	SET_RMAN_LIODN(0, 678),
+	SET_RMAN_LIODN(1, 679),
+	SET_RMAN_LIODN(2, 680),
+	SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+	[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+	[FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/b4860_serdes.c b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
new file mode 100644
index 0000000..9990202
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/b4860_serdes.c
@@ -0,0 +1,162 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+	u8 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{0x0D, {CPRI8, CPRI7, CPRI6, CPRI5,
+		CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x0E, {CPRI8, CPRI7,	CPRI6, CPRI5,
+		CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x12, {CPRI8, CPRI7,	CPRI6, CPRI5,
+		CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x2a, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		CPRI6, CPRI5, CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x30, {AURORA, AURORA,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x32, {AURORA, AURORA,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x33, {AURORA, AURORA,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x34, {AURORA, AURORA,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		CPRI4, CPRI3, CPRI2, CPRI1}},
+	{0x3E, {CPRI8, CPRI7,	CPRI6, CPRI5,
+		CPRI4, CPRI3, CPRI2, CPRI1}},
+	{}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{0x18, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		AURORA, AURORA,	SRIO1, SRIO1}},
+	{0x1D, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		AURORA, AURORA,	SRIO1, SRIO1}},
+	{0x2B, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SRIO2, SRIO2,
+		AURORA, AURORA, SRIO1, SRIO1}},
+	{0x30, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SRIO2, SRIO2,
+		AURORA, AURORA,
+		SRIO1, SRIO1}},
+	{0x49, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, AURORA,
+		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{0x4A, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, AURORA,
+		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{0x4C, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, AURORA,
+		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{0x4E, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, AURORA,
+		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{0x84, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SRIO2, SRIO2, AURORA, AURORA,
+		XFI_FM1_MAC9, XFI_FM1_MAC10}},
+	{0x85, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SRIO2, SRIO2, AURORA, AURORA,
+		XFI_FM1_MAC9, XFI_FM1_MAC10}},
+	{0x87, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SRIO2, SRIO2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		XFI_FM1_MAC9, XFI_FM1_MAC10}},
+	{0x93, {SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+	{0x9E, {PCIE1, PCIE1,	PCIE1, PCIE1,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+	{0x9A, {PCIE1, PCIE1,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+	{0xB2, {PCIE1, PCIE1, PCIE1, PCIE1,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		XFI_FM1_MAC9, XFI_FM1_MAC10}},
+	{0xC3, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{}
+};
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+	serdes2_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/cmd_errata.c b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
index e8989bd..2be192d 100644
--- a/arch/powerpc/cpu/mpc85xx/cmd_errata.c
+++ b/arch/powerpc/cpu/mpc85xx/cmd_errata.c
@@ -76,11 +76,15 @@
 #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC111)
 	puts("Work-around for Erratum ESDHC111 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+	puts("Work-around for Erratum A004468 enabled\n");
+#endif
 #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC135)
 	puts("Work-around for Erratum ESDHC135 enabled\n");
 #endif
-#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC136)
-	puts("Work-around for Erratum ESDHC136 enabled\n");
+#if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC13)
+	if (SVR_MAJ(svr) < 3)
+		puts("Work-around for Erratum ESDHC13 enabled\n");
 #endif
 #if defined(CONFIG_SYS_FSL_ERRATUM_ESDHC_A001)
 	puts("Work-around for Erratum ESDHC-A001 enabled\n");
@@ -127,6 +131,12 @@
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004510
 	puts("Work-around for Erratum A004510 enabled\n");
 #endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+	puts("Work-around for Erratum SRIO-A004034 enabled\n");
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+	puts("Work-around for Erratum A004934 enabled\n");
+#endif
 	return 0;
 }
 
diff --git a/arch/powerpc/cpu/mpc85xx/cpu.c b/arch/powerpc/cpu/mpc85xx/cpu.c
index 5ddb294..db232e6 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu.c
@@ -60,20 +60,32 @@
 	uint major, minor;
 	struct cpu_type *cpu;
 	char buf1[32], buf2[32];
-#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
+#if (defined(CONFIG_DDR_CLK_FREQ) || \
+	defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 #endif /* CONFIG_FSL_CORENET */
+
+	/*
+	 * Cornet platforms use ddr sync bit in RCW to indicate sync vs async
+	 * mode. Previous platform use ddr ratio to do the same. This
+	 * information is only for display here.
+	 */
+#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+	u32 ddr_sync = 0;	/* only async mode is supported */
+#else
+	u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
+		>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#else	/* CONFIG_FSL_CORENET */
 #ifdef CONFIG_DDR_CLK_FREQ
 	u32 ddr_ratio = ((gur->porpllsr) & MPC85xx_PORPLLSR_DDR_RATIO)
 		>> MPC85xx_PORPLLSR_DDR_RATIO_SHIFT;
 #else
-#ifdef CONFIG_FSL_CORENET
-	u32 ddr_sync = ((gur->rcwsr[5]) & FSL_CORENET_RCWSR5_DDR_SYNC)
-		>> FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT;
-#else
 	u32 ddr_ratio = 0;
-#endif /* CONFIG_FSL_CORENET */
 #endif /* CONFIG_DDR_CLK_FREQ */
+#endif /* CONFIG_FSL_CORENET */
+
 	unsigned int i, core, nr_cores = cpu_numcores();
 	u32 mask = cpu_mask();
 
@@ -127,6 +139,11 @@
 
 	printf(", Version: %d.%d, (0x%08x)\n", major, minor, pvr);
 
+	if (nr_cores > CONFIG_MAX_CPUS) {
+		panic("\nUnexpected number of cores: %d, max is %d\n",
+			nr_cores, CONFIG_MAX_CPUS);
+	}
+
 	get_sys_info(&sysinfo);
 
 	puts("Clock Configuration:");
@@ -181,6 +198,10 @@
 	}
 #endif
 
+#if defined(CONFIG_FSL_IFC)
+	printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+#endif
+
 #ifdef CONFIG_CPM2
 	printf("CPM:   %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
 #endif
@@ -196,6 +217,10 @@
 	}
 #endif
 
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	printf("       QMAN:  %s MHz\n", strmhz(buf1, sysinfo.freqQMAN));
+#endif
+
 #ifdef CONFIG_SYS_DPAA_PME
 	printf("       PME:   %s MHz\n", strmhz(buf1, sysinfo.freqPME));
 #endif
@@ -270,10 +295,7 @@
 	/*
 	 * Clear TSR(WIS) bit by writing 1
 	 */
-	unsigned long val;
-	val = mfspr(SPRN_TSR);
-	val |= TSR_WIS;
-	mtspr(SPRN_TSR, val);
+	mtspr(SPRN_TSR, TSR_WIS);
 }
 #endif	/* CONFIG_WATCHDOG */
 
diff --git a/arch/powerpc/cpu/mpc85xx/cpu_init.c b/arch/powerpc/cpu/mpc85xx/cpu_init.c
index afb5671..f01804b 100644
--- a/arch/powerpc/cpu/mpc85xx/cpu_init.c
+++ b/arch/powerpc/cpu/mpc85xx/cpu_init.c
@@ -182,7 +182,7 @@
 	printf("Corenet Platform Cache: %d KB enabled\n", size);
 }
 
-void invalidate_cpc(void)
+static void invalidate_cpc(void)
 {
 	int i;
 	cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
@@ -295,6 +295,43 @@
 }
 __attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
 
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int enable_cluster_l2(void)
+{
+	int i = 0;
+	u32 cluster;
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	struct ccsr_cluster_l2 __iomem *l2cache;
+
+	cluster = in_be32(&gur->tp_cluster[i].lower);
+	if (cluster & TP_CLUSTER_EOC)
+		return 0;
+
+	/* The first cache has already been set up, so skip it */
+	i++;
+
+	/* Look through the remaining clusters, and set up their caches */
+	do {
+		l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
+		cluster = in_be32(&gur->tp_cluster[i].lower);
+
+		/* set stash ID to (cluster) * 2 + 32 + 1 */
+		clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+
+		printf("enable l2 for cluster %d %p\n", i, l2cache);
+
+		out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
+		while ((in_be32(&l2cache->l2csr0) &
+			(L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
+			;
+		out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+		i++;
+	} while (!(cluster & TP_CLUSTER_EOC));
+
+	return 0;
+}
+#endif
+
 /*
  * Initialize L2 as cache.
  *
@@ -306,7 +343,12 @@
 {
 	__maybe_unused u32 svr = get_svr();
 #ifdef CONFIG_SYS_LBC_LCRR
-	volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+	fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
+#endif
+#ifdef CONFIG_L2_CACHE
+	ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+	struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
 #endif
 
 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
@@ -356,7 +398,6 @@
 	puts ("L2:    ");
 
 #if defined(CONFIG_L2_CACHE)
-	volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
 	volatile uint cache_ctl;
 	uint ver;
 	u32 l2siz_field;
@@ -467,6 +508,11 @@
 	}
 
 skip_l2:
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+	if (l2cache->l2csr0 & L2CSR0_L2E)
+		printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+
+	enable_cluster_l2();
 #else
 	puts("disabled\n");
 #endif
@@ -478,7 +524,7 @@
 
 #ifdef CONFIG_SYS_SRIO
 	srio_init();
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER 
 	char *s = getenv("bootmaster");
 	if (s) {
 		if (!strcmp(s, "SRIO1")) {
@@ -497,11 +543,13 @@
 	setup_mp();
 #endif
 
-#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13
 	{
-		void *p;
-		p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
-		setbits_be32(p, 1 << (31 - 14));
+		if (SVR_MAJ(svr) < 3) {
+			void *p;
+			p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
+			setbits_be32(p, 1 << (31 - 14));
+		}
 	}
 #endif
 
diff --git a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
index ca4ed62..f118dd5 100644
--- a/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
+++ b/arch/powerpc/cpu/mpc85xx/ddr-gen3.c
@@ -18,12 +18,14 @@
 void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 			     unsigned int ctrl_num)
 {
-	unsigned int i;
+	unsigned int i, bus_width;
 	volatile ccsr_ddr_t *ddr;
 	u32 temp_sdram_cfg;
-#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
-	volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
 	u32 total_gb_size_per_controller;
+	int timeout;
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	int timeout_save;
+	volatile ccsr_local_ecm_t *ecm = (void *)CONFIG_SYS_MPC85xx_ECM_ADDR;
 	unsigned int csn_bnds_backup = 0, cs_sa, cs_ea, *csn_bnds_t;
 	int csn = -1;
 #endif
@@ -52,8 +54,8 @@
 		return;
 	}
 
-	out_be32(&ddr->eor, regs->ddr_eor);
-
+	if (regs->ddr_eor)
+		out_be32(&ddr->eor, regs->ddr_eor);
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
 	debug("Workaround for ERRATUM_DDR111_DDR134\n");
 	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
@@ -121,6 +123,11 @@
 	out_be32(&ddr->timing_cfg_5, regs->timing_cfg_5);
 	out_be32(&ddr->ddr_zq_cntl, regs->ddr_zq_cntl);
 	out_be32(&ddr->ddr_wrlvl_cntl, regs->ddr_wrlvl_cntl);
+	if (regs->ddr_wrlvl_cntl_2)
+		out_be32(&ddr->ddr_wrlvl_cntl_2, regs->ddr_wrlvl_cntl_2);
+	if (regs->ddr_wrlvl_cntl_3)
+		out_be32(&ddr->ddr_wrlvl_cntl_3, regs->ddr_wrlvl_cntl_3);
+
 	out_be32(&ddr->ddr_sr_cntr, regs->ddr_sr_cntr);
 	out_be32(&ddr->ddr_sdram_rcw_1, regs->ddr_sdram_rcw_1);
 	out_be32(&ddr->ddr_sdram_rcw_2, regs->ddr_sdram_rcw_2);
@@ -134,6 +141,9 @@
 			out_be32(&ddr->debug[i], regs->debug[i]);
 		}
 	}
+#ifdef CONFIG_SYS_FSL_ERRATUM_A_004934
+	out_be32(&ddr->debug[28], 0x00003000);
+#endif
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR_A003474
 	out_be32(&ddr->debug[12], 0x00000015);
@@ -270,9 +280,48 @@
 	out_be32(&ddr->sdram_cfg, temp_sdram_cfg | SDRAM_CFG_MEM_EN);
 	asm volatile("sync;isync");
 
+	total_gb_size_per_controller = 0;
+	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
+		if (!(regs->cs[i].config & 0x80000000))
+			continue;
+		total_gb_size_per_controller += 1 << (
+			((regs->cs[i].config >> 14) & 0x3) + 2 +
+			((regs->cs[i].config >> 8) & 0x7) + 12 +
+			((regs->cs[i].config >> 0) & 0x7) + 8 +
+			3 - ((regs->ddr_sdram_cfg >> 19) & 0x3) -
+			26);			/* minus 26 (count of 64M) */
+	}
+	if (fsl_ddr_get_intl3r() & 0x80000000)	/* 3-way interleaving */
+		total_gb_size_per_controller *= 3;
+	else if (regs->cs[0].config & 0x20000000) /* 2-way interleaving */
+		total_gb_size_per_controller <<= 1;
+	/*
+	 * total memory / bus width = transactions needed
+	 * transactions needed / data rate = seconds
+	 * to add plenty of buffer, double the time
+	 * For example, 2GB on 666MT/s 64-bit bus takes about 402ms
+	 * Let's wait for 800ms
+	 */
+	bus_width = 3 - ((ddr->sdram_cfg & SDRAM_CFG_DBW_MASK)
+			>> SDRAM_CFG_DBW_SHIFT);
+	timeout = ((total_gb_size_per_controller << (6 - bus_width)) * 100 /
+		(get_ddr_freq(0) >> 20)) << 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
+	timeout_save = timeout;
+#endif
+	total_gb_size_per_controller >>= 4;	/* shift down to gb size */
+	debug("total %d GB\n", total_gb_size_per_controller);
+	debug("Need to wait up to %d * 10ms\n", timeout);
+
 	/* Poll DDR_SDRAM_CFG_2[D_INIT] bit until auto-data init is done.  */
-	while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
+	while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+		(timeout >= 0)) {
 		udelay(10000);		/* throttle polling rate */
+		timeout--;
+	}
+
+	if (timeout <= 0)
+		printf("Waiting for D_INIT timeout. Memory may not work.\n");
 
 #ifdef CONFIG_SYS_FSL_ERRATUM_DDR111_DDR134
 	/* continue this workaround */
@@ -330,23 +379,9 @@
 	while (in_be32(&ddr->debug[1]) & 0x400)
 		udelay(10000);          /* throttle polling rate */
 
-	/* 7. Wait for 400ms/GB */
-	total_gb_size_per_controller = 0;
-	for (i = 0; i < CONFIG_CHIP_SELECTS_PER_CTRL; i++) {
-		if (i == csn) {
-			total_gb_size_per_controller +=
-				((csn_bnds_backup & 0xFFFF) >> 6)
-				- (csn_bnds_backup >> 22) + 1;
-		} else {
-			total_gb_size_per_controller +=
-				((regs->cs[i].bnds & 0xFFFF) >> 6)
-				- (regs->cs[i].bnds >> 22) + 1;
-		}
-	}
-	if (in_be32(&ddr->sdram_cfg) & 0x80000)
-		total_gb_size_per_controller <<= 1;
-	debug("Wait for %d ms\n", total_gb_size_per_controller * 400);
-	udelay(total_gb_size_per_controller * 400000);
+	/* 7. Wait for state machine 2nd run, roughly 400ms/GB */
+	debug("Wait for %d * 10ms\n", timeout_save);
+	udelay(timeout_save * 10000);
 
 	/* 8. Set sdram_cfg_2[dinit] if options requires */
 	setbits_be32(&ddr->sdram_cfg_2,
@@ -354,8 +389,16 @@
 	debug("Setting sdram_cfg_2 to 0x%08x\n", in_be32(&ddr->sdram_cfg_2));
 
 	/* 9. Poll until dinit is cleared */
-	while (in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT)
-		udelay(10000);
+	timeout = timeout_save;
+	debug("Need to wait up to %d * 10ms\n", timeout);
+	while ((in_be32(&ddr->sdram_cfg_2) & SDRAM_CFG2_D_INIT) &&
+		(timeout >= 0)) {
+		udelay(10000);		/* throttle polling rate */
+		timeout--;
+	}
+
+	if (timeout <= 0)
+		printf("Waiting for D_INIT timeout. Memory may not work.\n");
 
 	/* 10. Clear EEBACR[3] */
 	clrbits_be32(&ecm->eebacr, 10000000);
diff --git a/arch/powerpc/cpu/mpc85xx/fdt.c b/arch/powerpc/cpu/mpc85xx/fdt.c
index a0a9b4c..ab09330 100644
--- a/arch/powerpc/cpu/mpc85xx/fdt.c
+++ b/arch/powerpc/cpu/mpc85xx/fdt.c
@@ -47,8 +47,8 @@
 void ft_fixup_cpu(void *blob, u64 memory_limit)
 {
 	int off;
-	ulong spin_tbl_addr = get_spin_phys_addr();
-	u32 bootpg = determine_mp_bootpg();
+	phys_addr_t spin_tbl_addr = get_spin_phys_addr();
+	u32 bootpg = determine_mp_bootpg(NULL);
 	u32 id = get_my_id();
 	const char *enable_method;
 
@@ -97,7 +97,16 @@
 	if ((u64)bootpg < memory_limit) {
 		off = fdt_add_mem_rsv(blob, bootpg, (u64)4096);
 		if (off < 0)
-			printf("%s: %s\n", __FUNCTION__, fdt_strerror(off));
+			printf("Failed to reserve memory for bootpg: %s\n",
+				fdt_strerror(off));
+	}
+	/* Reserve spin table page */
+	if (spin_tbl_addr < memory_limit) {
+		off = fdt_add_mem_rsv(blob,
+			(spin_tbl_addr & ~0xffful), 4096);
+		if (off < 0)
+			printf("Failed to reserve memory for spin table: %s\n",
+				fdt_strerror(off));
 	}
 }
 #endif
@@ -220,12 +229,19 @@
 
 	/* we dont bother w/L3 since no platform of this type has one */
 }
-#elif defined(CONFIG_BACKSIDE_L2_CACHE)
+#elif defined(CONFIG_BACKSIDE_L2_CACHE) || \
+	defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
 static inline void ft_fixup_l2cache(void *blob)
 {
 	int off, l2_off, l3_off = -1;
 	u32 *ph;
+#ifdef	CONFIG_BACKSIDE_L2_CACHE
 	u32 l2cfg0 = mfspr(SPRN_L2CFG0);
+#else
+	struct ccsr_cluster_l2 *l2cache =
+		(struct ccsr_cluster_l2 __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2);
+	u32 l2cfg0 = in_be32(&l2cache->l2cfg0);
+#endif
 	u32 size, line_size, num_ways, num_sets;
 	int has_l2 = 1;
 
@@ -257,7 +273,12 @@
 		if (has_l2) {
 #ifdef CONFIG_SYS_CACHE_STASHING
 			u32 *reg = (u32 *)fdt_getprop(blob, off, "reg", 0);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+			/* Only initialize every eighth thread */
+			if (reg && !((*reg) % 8))
+#else
 			if (reg)
+#endif
 				fdt_setprop_cell(blob, l2_off, "cache-stash-id",
 					 (*reg * 2) + 32 + 1);
 #endif
@@ -390,6 +411,11 @@
 #endif
 #endif
 
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	do_fixup_by_compat_u32(blob, "fsl,qman",
+			"clock-frequency", sysinfo.freqQMAN, 1);
+#endif
+
 #ifdef CONFIG_SYS_DPAA_PME
 	do_fixup_by_compat_u32(blob, "fsl,pme",
 		"clock-frequency", sysinfo.freqPME, 1);
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
new file mode 100644
index 0000000..01dcdf6
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/immap_85xx.h>
+#include <asm/io.h>
+#include <asm/processor.h>
+#include <asm/fsl_law.h>
+#include <asm/errno.h>
+#include "fsl_corenet2_serdes.h"
+
+static u64 serdes1_prtcl_map;
+static u64 serdes2_prtcl_map;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+static u64 serdes3_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+static u64 serdes4_prtcl_map;
+#endif
+
+#ifdef DEBUG
+static const char *serdes_prtcl_str[] = {
+	[NONE] = "NA",
+	[PCIE1] = "PCIE1",
+	[PCIE2] = "PCIE2",
+	[PCIE3] = "PCIE3",
+	[PCIE4] = "PCIE4",
+	[SATA1] = "SATA1",
+	[SATA2] = "SATA2",
+	[SRIO1] = "SRIO1",
+	[SRIO2] = "SRIO2",
+	[SGMII_FM1_DTSEC1] = "SGMII_FM1_DTSEC1",
+	[SGMII_FM1_DTSEC2] = "SGMII_FM1_DTSEC2",
+	[SGMII_FM1_DTSEC3] = "SGMII_FM1_DTSEC3",
+	[SGMII_FM1_DTSEC4] = "SGMII_FM1_DTSEC4",
+	[SGMII_FM1_DTSEC5] = "SGMII_FM1_DTSEC5",
+	[SGMII_FM1_DTSEC6] = "SGMII_FM1_DTSEC6",
+	[SGMII_FM2_DTSEC1] = "SGMII_FM2_DTSEC1",
+	[SGMII_FM2_DTSEC2] = "SGMII_FM2_DTSEC2",
+	[SGMII_FM2_DTSEC3] = "SGMII_FM2_DTSEC3",
+	[SGMII_FM2_DTSEC4] = "SGMII_FM2_DTSEC4",
+	[XAUI_FM1] = "XAUI_FM1",
+	[XAUI_FM2] = "XAUI_FM2",
+	[AURORA] = "DEBUG",
+	[CPRI1] = "CPRI1",
+	[CPRI2] = "CPRI2",
+	[CPRI3] = "CPRI3",
+	[CPRI4] = "CPRI4",
+	[CPRI5] = "CPRI5",
+	[CPRI6] = "CPRI6",
+	[CPRI7] = "CPRI7",
+	[CPRI8] = "CPRI8",
+	[XAUI_FM1_MAC9] = "XAUI_FM1_MAC9",
+	[XAUI_FM1_MAC10] = "XAUI_FM1_MAC10",
+	[XAUI_FM2_MAC9] = "XAUI_FM2_MAC9",
+	[XAUI_FM2_MAC10] = "XAUI_FM2_MAC10",
+	[HIGIG_FM1_MAC9] = "HiGig_FM1_MAC9",
+	[HIGIG_FM1_MAC10] = "HiGig_FM1_MAC10",
+	[HIGIG_FM2_MAC9] = "HiGig_FM2_MAC9",
+	[HIGIG_FM2_MAC10] = "HiGig_FM2_MAC10",
+	[QSGMII_FM1_A] = "QSGMII_FM1_A",
+	[QSGMII_FM1_B] = "QSGMII_FM1_B",
+	[QSGMII_FM2_A] = "QSGMII_FM2_A",
+	[QSGMII_FM2_B] = "QSGMII_FM2_B",
+	[XFI_FM1_MAC9] = "XFI_FM1_MAC9",
+	[XFI_FM1_MAC10] = "XFI_FM1_MAC10",
+	[XFI_FM2_MAC9] = "XFI_FM2_MAC9",
+	[XFI_FM2_MAC10] = "XFI_FM2_MAC10",
+	[INTERLAKEN] = "INTERLAKEN",
+};
+#endif
+
+int is_serdes_configured(enum srds_prtcl device)
+{
+	u64 ret = 0;
+
+	ret |= (1ULL << device) & serdes1_prtcl_map;
+	ret |= (1ULL << device) & serdes2_prtcl_map;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+	ret |= (1ULL << device) & serdes3_prtcl_map;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+	ret |= (1ULL << device) & serdes4_prtcl_map;
+#endif
+
+	return !!ret;
+}
+
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device)
+{
+	const ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 cfg = in_be32(&gur->rcwsr[4]);
+	int i;
+
+	switch (sd) {
+	case FSL_SRDS_1:
+		cfg &= FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+		cfg >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+		break;
+	case FSL_SRDS_2:
+		cfg &= FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+		cfg >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+		break;
+#ifdef CONFIG_SYS_FSL_SRDS_3
+	case FSL_SRDS_3:
+		cfg &= FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
+		cfg >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
+		break;
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+	case FSL_SRDS_4:
+		cfg &= FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
+		cfg >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
+		break;
+#endif
+	default:
+		printf("invalid SerDes%d\n", sd);
+		break;
+	}
+	/* Is serdes enabled at all? */
+	if (unlikely(cfg == 0))
+		return -ENODEV;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_get_prtcl(sd, cfg, i) == device)
+			return i;
+	}
+
+	return -ENODEV;
+}
+
+u64 serdes_init(u32 sd, u32 sd_addr, u32 sd_prctl_mask, u32 sd_prctl_shift)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u64 serdes_prtcl_map = 0;
+	u32 cfg;
+	int lane;
+
+	cfg = in_be32(&gur->rcwsr[4]) & sd_prctl_mask;
+	/* Is serdes enabled at all? */
+	if (!cfg) {
+		printf("SERDES%d is not enabled\n", sd + 1);
+		return 0;
+	}
+
+	cfg >>= sd_prctl_shift;
+	printf("Using SERDES%d Protocol: 0x%x\n", sd + 1, cfg);
+	if (!is_serdes_prtcl_valid(sd, cfg))
+		printf("SERDES%d[PRTCL] = 0x%x is not valid\n", sd + 1, cfg);
+
+	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
+		enum srds_prtcl lane_prtcl = serdes_get_prtcl(sd, cfg, lane);
+		serdes_prtcl_map |= (1ULL << lane_prtcl);
+	}
+
+	return serdes_prtcl_map;
+}
+
+void fsl_serdes_init(void)
+{
+
+	serdes1_prtcl_map = serdes_init(FSL_SRDS_1,
+		CONFIG_SYS_FSL_CORENET_SERDES_ADDR,
+		FSL_CORENET2_RCWSR4_SRDS1_PRTCL,
+		FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT);
+	serdes2_prtcl_map = serdes_init(FSL_SRDS_2,
+		CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_2 * 0x1000,
+		FSL_CORENET2_RCWSR4_SRDS2_PRTCL,
+		FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT);
+#ifdef CONFIG_SYS_FSL_SRDS_3
+	serdes3_prtcl_map = serdes_init(FSL_SRDS_3,
+		CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_3 * 0x1000,
+		FSL_CORENET2_RCWSR4_SRDS3_PRTCL,
+		FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT);
+#endif
+#ifdef CONFIG_SYS_FSL_SRDS_4
+	serdes4_prtcl_map = serdes_init(FSL_SRDS_4,
+		CONFIG_SYS_FSL_CORENET_SERDES_ADDR + FSL_SRDS_4 * 0x1000,
+		FSL_CORENET2_RCWSR4_SRDS4_PRTCL,
+		FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT);
+#endif
+
+}
diff --git a/arch/arm/include/asm/arch-lpc2292/hardware.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
similarity index 63%
copy from arch/arm/include/asm/arch-lpc2292/hardware.h
copy to arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
index 5e227e3..2258f41 100644
--- a/arch/arm/include/asm/arch-lpc2292/hardware.h
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet2_serdes.h
@@ -1,12 +1,5 @@
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
 /*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
+ * Copyright 2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -24,10 +17,10 @@
  * MA 02111-1307 USA
  */
 
-#if defined(CONFIG_LPC2292)
-#include <asm/arch-lpc2292/lpc2292_registers.h>
-#else
-#error No hardware file defined for this configuration
-#endif
+#ifndef __FSL_CORENET2_SERDES_H
+#define __FSL_CORENET2_SERDES_H
 
-#endif /* __ASM_ARCH_HARDWARE_H */
+int is_serdes_prtcl_valid(int serdes, u32 prtcl);
+int serdes_lane_enabled(int lane);
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane);
+#endif /* __FSL_CORENET2_SERDES_H */
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
index 2a68060..7f466ac 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.c
@@ -92,10 +92,17 @@
 	{ 17, 163, FSL_SRDS_BANK_2 },
 	{ 18, 164, FSL_SRDS_BANK_2 },
 	{ 19, 165, FSL_SRDS_BANK_2 },
+#ifdef CONFIG_PPC_P4080
 	{ 20, 170, FSL_SRDS_BANK_3 },
 	{ 21, 171, FSL_SRDS_BANK_3 },
 	{ 22, 172, FSL_SRDS_BANK_3 },
 	{ 23, 173, FSL_SRDS_BANK_3 },
+#else
+	{ 20, 166, FSL_SRDS_BANK_3 },
+	{ 21, 167, FSL_SRDS_BANK_3 },
+	{ 22, 168, FSL_SRDS_BANK_3 },
+	{ 23, 169, FSL_SRDS_BANK_3 },
+#endif
 };
 
 int serdes_get_lane_idx(int lane)
@@ -482,7 +489,7 @@
 }
 
 
-void __soc_serdes_init(void)
+static void __soc_serdes_init(void)
 {
 	/* Allow for SoC-specific initialization in <SOC>_serdes.c  */
 };
@@ -493,6 +500,9 @@
 	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
 	int cfg;
 	serdes_corenet_t *srds_regs;
+#ifdef CONFIG_PPC_P5040
+	serdes_corenet_t *srds2_regs;
+#endif
 	int lane, bank, idx;
 	int have_bank[SRDS_MAX_BANK] = {};
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
@@ -574,6 +584,34 @@
 		}
 	}
 
+#ifdef CONFIG_PPC_P5040
+	/*
+	 * Lanes on bank 4 on P5040 are commented-out, but for some SERDES
+	 * protocols, these lanes are routed to SATA.  We use serdes_prtcl_map
+	 * to decide whether a protocol is supported on a given lane, so SATA
+	 * will be identified as not supported, and therefore not initialized.
+	 * So for protocols which use SATA on bank4, we add SATA support in
+	 * serdes_prtcl_map.
+	 */
+	switch (cfg) {
+	case 0x0:
+	case 0x1:
+	case 0x2:
+	case 0x3:
+	case 0x4:
+	case 0x5:
+	case 0x6:
+	case 0x7:
+		serdes_prtcl_map |= 1 << SATA1 | 1 << SATA2;
+		break;
+	default:
+		srds2_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES2_ADDR;
+
+		/* We don't need bank 4, so power it down */
+		setbits_be32(&srds2_regs->bank[0].rstctl, SRDS_RSTCTL_SDPD);
+	}
+#endif
+
 	soc_serdes_init();
 
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES8
@@ -617,6 +655,38 @@
 		}
 	}
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004699
+	/*
+	 * To avoid the situation that resulted in the P4080 erratum
+	 * SERDES-8, a given SerDes bank will use the PLLs from the previous
+	 * bank if one of the PLL frequencies is a multiple of the other.  For
+	 * instance, if bank 3 is running at 2.5GHz and bank 2 is at 1.25GHz,
+	 * then bank 3 will use bank 2's PLL.  P5040 Erratum A-004699 says
+	 * that, in this situation, lane synchronization is not initiated.  So
+	 * when we detect a bank with a "borrowed" PLL, we have to manually
+	 * initiate lane synchronization.
+	 */
+	for (bank = FSL_SRDS_BANK_2; bank <= FSL_SRDS_BANK_3; bank++) {
+		/* Determine the first lane for this bank */
+		unsigned int lane;
+
+		for (lane = 0; lane < SRDS_MAX_LANES; lane++)
+			if (lanes[lane].bank == bank)
+				break;
+		idx = lanes[lane].idx;
+
+		/*
+		 * Check if the PLL for the bank is borrowed.  The UOTHL
+		 * bit of the first lane will tell us that.
+		 */
+		if (in_be32(&srds_regs->lane[idx].gcr0) & SRDS_GCR0_UOTHL) {
+			/* Manually start lane synchronization */
+			setbits_be32(&srds_regs->bank[bank].pllcr0,
+				     SRDS_PLLCR0_PVCOCNT_EN);
+		}
+	}
+#endif
+
 #if defined(CONFIG_SYS_P4080_ERRATUM_SERDES8) || defined (CONFIG_SYS_P4080_ERRATUM_SERDES9)
 	for (lane = 0; lane < SRDS_MAX_LANES; lane++) {
 		enum srds_prtcl lane_prtcl;
diff --git a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
index f261351..3c551e9 100644
--- a/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
+++ b/arch/powerpc/cpu/mpc85xx/fsl_corenet_serdes.h
@@ -22,9 +22,6 @@
 #ifndef __FSL_CORENET_SERDES_H
 #define __FSL_CORENET_SERDES_H
 
-#define SRDS_MAX_LANES		18
-#define SRDS_MAX_BANK		3
-
 enum srds_bank {
 	FSL_SRDS_BANK_1  = 0,
 	FSL_SRDS_BANK_2  = 1,
diff --git a/arch/powerpc/cpu/mpc85xx/liodn.c b/arch/powerpc/cpu/mpc85xx/liodn.c
index 11881c9..2e53367 100644
--- a/arch/powerpc/cpu/mpc85xx/liodn.c
+++ b/arch/powerpc/cpu/mpc85xx/liodn.c
@@ -40,6 +40,7 @@
 	return liodn_bases[dpaa_dev].num_ids;
 }
 
+#ifdef CONFIG_SYS_SRIO
 static void set_srio_liodn(struct srio_liodn_id_table *tbl, int size)
 {
 	int i;
@@ -54,6 +55,7 @@
 		}
 	}
 }
+#endif
 
 static void set_liodn(struct liodn_id_table *tbl, int size)
 {
@@ -181,8 +183,10 @@
 	/* setup general liodn offsets */
 	set_liodn(liodn_tbl, liodn_tbl_sz);
 
+#ifdef CONFIG_SYS_SRIO
 	/* setup SRIO port liodns */
 	set_srio_liodn(srio_liodn_tbl, srio_liodn_tbl_sz);
+#endif
 
 	/* setup SEC block liodn bases & offsets if we have one */
 	if (IS_E_PROCESSOR(get_svr())) {
@@ -219,6 +223,7 @@
 #endif
 }
 
+#ifdef CONFIG_SYS_SRIO
 static void fdt_fixup_srio_liodn(void *blob, struct srio_liodn_id_table *tbl)
 {
 	int i, srio_off;
@@ -247,6 +252,57 @@
 		}
 	}
 }
+#endif
+
+#define CONFIG_SYS_MAX_PCI_EPS		8
+#define CONFIG_SYS_PCI_EP_LIODN_START	256
+
+static void fdt_fixup_pci_liodn_offsets(void *fdt, const char *compat)
+{
+	int off, pci_idx = 0, pci_cnt = 0, i, rc;
+	const uint32_t *base_liodn;
+	uint32_t liodn_offs[CONFIG_SYS_MAX_PCI_EPS + 1] = { 0 };
+
+	/*
+	 * Count the number of pci nodes.
+	 * It's needed later when the interleaved liodn offsets are generated.
+	 */
+	off = fdt_node_offset_by_compatible(fdt, -1, compat);
+	while (off != -FDT_ERR_NOTFOUND) {
+		pci_cnt++;
+		off = fdt_node_offset_by_compatible(fdt, off, compat);
+	}
+
+	for (off = fdt_node_offset_by_compatible(fdt, -1, compat);
+	     off != -FDT_ERR_NOTFOUND;
+	     off = fdt_node_offset_by_compatible(fdt, off, compat)) {
+		base_liodn = fdt_getprop(fdt, off, "fsl,liodn", &rc);
+		if (!base_liodn) {
+			char path[64];
+
+			if (fdt_get_path(fdt, off, path, sizeof(path)) < 0)
+				strcpy(path, "(unknown)");
+			printf("WARNING Could not get liodn of node %s: %s\n",
+			       path, fdt_strerror(rc));
+			continue;
+		}
+		for (i = 0; i < CONFIG_SYS_MAX_PCI_EPS; i++)
+			liodn_offs[i + 1] = CONFIG_SYS_PCI_EP_LIODN_START +
+					i * pci_cnt + pci_idx - *base_liodn;
+		rc = fdt_setprop(fdt, off, "fsl,liodn-offset-list",
+				 liodn_offs, sizeof(liodn_offs));
+		if (rc) {
+			char path[64];
+
+			if (fdt_get_path(fdt, off, path, sizeof(path)) < 0)
+				strcpy(path, "(unknown)");
+			printf("WARNING Unable to set fsl,liodn-offset-list for "
+			       "node %s: %s\n", path, fdt_strerror(rc));
+			continue;
+		}
+		pci_idx++;
+	}
+}
 
 static void fdt_fixup_liodn_tbl(void *blob, struct liodn_id_table *tbl, int sz)
 {
@@ -277,7 +333,9 @@
 
 void fdt_fixup_liodn(void *blob)
 {
+#ifdef CONFIG_SYS_SRIO
 	fdt_fixup_srio_liodn(blob, srio_liodn_tbl);
+#endif
 
 	fdt_fixup_liodn_tbl(blob, liodn_tbl, liodn_tbl_sz);
 #ifdef CONFIG_SYS_DPAA_FMAN
@@ -295,4 +353,6 @@
 #ifdef CONFIG_SYS_DPAA_RMAN
 	fdt_fixup_liodn_tbl(blob, rman_liodn_tbl, rman_liodn_tbl_sz);
 #endif
+
+	fdt_fixup_pci_liodn_offsets(blob, "fsl,qoriq-pcie-v2.4");
 }
diff --git a/arch/powerpc/cpu/mpc85xx/mp.c b/arch/powerpc/cpu/mpc85xx/mp.c
index ffc2a9a..e1197ac 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.c
+++ b/arch/powerpc/cpu/mpc85xx/mp.c
@@ -27,9 +27,13 @@
 #include <asm/io.h>
 #include <asm/mmu.h>
 #include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
 #include "mp.h"
 
 DECLARE_GLOBAL_DATA_PTR;
+u32 fsl_ddr_get_intl3r(void);
+
+extern u32 __spin_table[];
 
 u32 get_my_id()
 {
@@ -76,17 +80,16 @@
 		return 0;
 
 	if (nr == id) {
-		table = (u32 *)get_spin_virt_addr();
+		table = (u32 *)&__spin_table;
 		printf("table base @ 0x%p\n", table);
 	} else {
-		table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+		table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
 		printf("Running on cpu %d\n", id);
 		printf("\n");
 		printf("table @ 0x%p\n", table);
 		printf("   addr - 0x%08x\n", table[BOOT_ENTRY_ADDR_LOWER]);
-		printf("   pir  - 0x%08x\n", table[BOOT_ENTRY_PIR]);
 		printf("   r3   - 0x%08x\n", table[BOOT_ENTRY_R3_LOWER]);
-		printf("   r6   - 0x%08x\n", table[BOOT_ENTRY_R6_LOWER]);
+		printf("   pir  - 0x%08x\n", table[BOOT_ENTRY_PIR]);
 	}
 
 	return 0;
@@ -149,12 +152,11 @@
 	0,
 	BOOT_ENTRY_PIR,
 	BOOT_ENTRY_R3_LOWER,
-	BOOT_ENTRY_R6_LOWER,
 };
 
 int cpu_release(int nr, int argc, char * const argv[])
 {
-	u32 i, val, *table = (u32 *)get_spin_virt_addr() + nr * NUM_BOOT_ENTRY;
+	u32 i, val, *table = (u32 *)&__spin_table + nr * NUM_BOOT_ENTRY;
 	u64 boot_addr;
 
 	if (hold_cores_in_reset(1))
@@ -172,8 +174,8 @@
 
 	boot_addr = simple_strtoull(argv[0], NULL, 16);
 
-	/* handle pir, r3, r6 */
-	for (i = 1; i < 4; i++) {
+	/* handle pir, r3 */
+	for (i = 1; i < 3; i++) {
 		if (argv[i][0] != '-') {
 			u8 entry = boot_entry_map[i];
 			val = simple_strtoul(argv[i], NULL, 16);
@@ -191,38 +193,80 @@
 	return 0;
 }
 
-u32 determine_mp_bootpg(void)
+u32 determine_mp_bootpg(unsigned int *pagesize)
 {
-	/* if we have 4G or more of memory, put the boot page at 4Gb-4k */
-	if ((u64)gd->ram_size > 0xfffff000)
-		return (0xfffff000);
+	u32 bootpg;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+	u32 svr = get_svr();
+	u32 granule_size, check;
+	struct law_entry e;
+#endif
 
-	return (gd->ram_size - 4096);
+
+	/* use last 4K of mapped memory */
+	bootpg = ((gd->ram_size > CONFIG_MAX_MEM_MAPPED) ?
+		CONFIG_MAX_MEM_MAPPED : gd->ram_size) +
+		CONFIG_SYS_SDRAM_BASE - 4096;
+	if (pagesize)
+		*pagesize = 4096;
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A004468
+/*
+ * Erratum A004468 has two parts. The 3-way interleaving applies to T4240,
+ * to be fixed in rev 2.0. The 2-way interleaving applies to many SoCs. But
+ * the way boot page chosen in u-boot avoids hitting this erratum. So only
+ * thw workaround for 3-way interleaving is needed.
+ *
+ * To make sure boot page translation works with 3-Way DDR interleaving
+ * enforce a check for the following constrains
+ * 8K granule size requires BRSIZE=8K and
+ *    bootpg >> log2(BRSIZE) %3 == 1
+ * 4K and 1K granule size requires BRSIZE=4K and
+ *    bootpg >> log2(BRSIZE) %3 == 0
+ */
+	if (SVR_SOC_VER(svr) == SVR_T4240 && SVR_MAJ(svr) < 2) {
+		e = find_law(bootpg);
+		switch (e.trgt_id) {
+		case LAW_TRGT_IF_DDR_INTLV_123:
+			granule_size = fsl_ddr_get_intl3r() & 0x1f;
+			if (granule_size == FSL_DDR_3WAY_8KB_INTERLEAVING) {
+				if (pagesize)
+					*pagesize = 8192;
+				bootpg &= 0xffffe000;	/* align to 8KB */
+				check = bootpg >> 13;
+				while ((check % 3) != 1)
+					check--;
+				bootpg = check << 13;
+				debug("Boot page (8K) at 0x%08x\n", bootpg);
+				break;
+			} else {
+				bootpg &= 0xfffff000;	/* align to 4KB */
+				check = bootpg >> 12;
+				while ((check % 3) != 0)
+					check--;
+				bootpg = check << 12;
+				debug("Boot page (4K) at 0x%08x\n", bootpg);
+			}
+				break;
+		default:
+			break;
+		}
+	}
+#endif /* CONFIG_SYS_FSL_ERRATUM_A004468 */
+
+	return bootpg;
 }
 
-ulong get_spin_phys_addr(void)
+phys_addr_t get_spin_phys_addr(void)
 {
-	extern ulong __secondary_start_page;
-	extern ulong __spin_table;
-
-	return (determine_mp_bootpg() +
-		(ulong)&__spin_table - (ulong)&__secondary_start_page);
-}
-
-ulong get_spin_virt_addr(void)
-{
-	extern ulong __secondary_start_page;
-	extern ulong __spin_table;
-
-	return (CONFIG_BPTR_VIRT_ADDR +
-		(ulong)&__spin_table - (ulong)&__secondary_start_page);
+	return virt_to_phys(&__spin_table);
 }
 
 #ifdef CONFIG_FSL_CORENET
-static void plat_mp_up(unsigned long bootpg)
+static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
 {
-	u32 cpu_up_mask, whoami;
-	u32 *table = (u32 *)get_spin_virt_addr();
+	u32 cpu_up_mask, whoami, brsize = LAW_SIZE_4K;
+	u32 *table = (u32 *)&__spin_table;
 	volatile ccsr_gur_t *gur;
 	volatile ccsr_local_t *ccm;
 	volatile ccsr_rcpm_t *rcpm;
@@ -241,7 +285,11 @@
 	out_be32(&ccm->bstrl, bootpg);
 
 	e = find_law(bootpg);
-	out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | LAW_SIZE_4K);
+	/* pagesize is only 4K or 8K */
+	if (pagesize == 8192)
+		brsize = LAW_SIZE_8K;
+	out_be32(&ccm->bstrar, LAW_EN | e.trgt_id << 20 | brsize);
+	debug("BRSIZE is 0x%x\n", brsize);
 
 	/* readback to sync write */
 	in_be32(&ccm->bstrar);
@@ -294,10 +342,10 @@
 #endif
 }
 #else
-static void plat_mp_up(unsigned long bootpg)
+static void plat_mp_up(unsigned long bootpg, unsigned int pagesize)
 {
 	u32 up, cpu_up_mask, whoami;
-	u32 *table = (u32 *)get_spin_virt_addr();
+	u32 *table = (u32 *)&__spin_table;
 	volatile u32 bpcr;
 	volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
@@ -374,27 +422,52 @@
 
 void cpu_mp_lmb_reserve(struct lmb *lmb)
 {
-	u32 bootpg = determine_mp_bootpg();
+	u32 bootpg = determine_mp_bootpg(NULL);
 
 	lmb_reserve(lmb, bootpg, 4096);
 }
 
 void setup_mp(void)
 {
-	extern ulong __secondary_start_page;
-	extern ulong __bootpg_addr;
-	ulong fixup = (ulong)&__secondary_start_page;
-	u32 bootpg = determine_mp_bootpg();
+	extern u32 __secondary_start_page;
+	extern u32 __bootpg_addr, __spin_table_addr, __second_half_boot_page;
+
+	int i;
+	ulong fixup = (u32)&__secondary_start_page;
+	u32 bootpg, bootpg_map, pagesize;
+
+	bootpg = determine_mp_bootpg(&pagesize);
+
+	/*
+	 * pagesize is only 4K or 8K
+	 * we only use the last 4K of boot page
+	 * bootpg_map saves the address for the boot page
+	 * 8K is used for the workaround of 3-way DDR interleaving
+	 */
+
+	bootpg_map = bootpg;
+
+	if (pagesize == 8192)
+		bootpg += 4096;	/* use 2nd half */
 
 	/* Some OSes expect secondary cores to be held in reset */
 	if (hold_cores_in_reset(0))
 		return;
 
-	/* Store the bootpg's SDRAM address for use by secondary CPU cores */
-	__bootpg_addr = bootpg;
+	/*
+	 * Store the bootpg's cache-able half address for use by secondary
+	 * CPU cores to continue to boot
+	 */
+	__bootpg_addr = (u32)virt_to_phys(&__second_half_boot_page);
+
+	/* Store spin table's physical address for use by secondary cores */
+	__spin_table_addr = (u32)get_spin_phys_addr();
+
+	/* flush bootpg it before copying invalidate any staled cacheline */
+	flush_cache(bootpg, 4096);
 
 	/* look for the tlb covering the reset page, there better be one */
-	int i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
+	i = find_tlb_idx((void *)CONFIG_BPTR_VIRT_ADDR, 1);
 
 	/* we found a match */
 	if (i != -1) {
@@ -407,7 +480,7 @@
 
 		memcpy((void *)CONFIG_BPTR_VIRT_ADDR, (void *)fixup, 4096);
 
-		plat_mp_up(bootpg);
+		plat_mp_up(bootpg_map, pagesize);
 	} else {
 		puts("WARNING: No reset page TLB. "
 			"Skipping secondary core setup\n");
diff --git a/arch/powerpc/cpu/mpc85xx/mp.h b/arch/powerpc/cpu/mpc85xx/mp.h
index 87bac37..ad9950b 100644
--- a/arch/powerpc/cpu/mpc85xx/mp.h
+++ b/arch/powerpc/cpu/mpc85xx/mp.h
@@ -3,8 +3,7 @@
 
 #include <asm/mp.h>
 
-ulong get_spin_phys_addr(void);
-ulong get_spin_virt_addr(void);
+phys_addr_t get_spin_phys_addr(void);
 u32 get_my_id(void);
 int hold_cores_in_reset(int verbose);
 
@@ -16,7 +15,7 @@
 #define BOOT_ENTRY_PIR		5
 #define BOOT_ENTRY_R6_UPPER	6
 #define BOOT_ENTRY_R6_LOWER	7
-#define NUM_BOOT_ENTRY		8
+#define NUM_BOOT_ENTRY		16	/* pad to 64 bytes */
 #define SIZE_BOOT_ENTRY		(NUM_BOOT_ENTRY * sizeof(u32))
 
 #endif
diff --git a/arch/powerpc/cpu/mpc85xx/p5040_ids.c b/arch/powerpc/cpu/mpc85xx/p5040_ids.c
new file mode 100644
index 0000000..878ee3e
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p5040_ids.c
@@ -0,0 +1,127 @@
+/*
+ * Copyright 2010-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	/* dqrr liodn, frame data liodn, liodn off, sdest */
+	SET_QP_INFO(1, 2, 1, 0),
+	SET_QP_INFO(3, 4, 2, 1),
+	SET_QP_INFO(5, 6, 3, 2),
+	SET_QP_INFO(7, 8, 4, 3),
+	SET_QP_INFO(9, 10, 5, 0),
+	SET_QP_INFO(11, 12, 6, 1),
+	SET_QP_INFO(13, 14, 7, 2),
+	SET_QP_INFO(15, 16, 8, 3),
+	SET_QP_INFO(17, 18, 9, 0),	/* for now, set sdest to 0 */
+	SET_QP_INFO(19, 20, 10, 0),	/* for now, set sdest to 0 */
+};
+#endif
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_LIODN(31),
+	SET_BMAN_LIODN(32),
+#endif
+
+	SET_SDHC_LIODN(1, 64),
+
+	SET_USB_LIODN(1, "fsl-usb2-mph", 93),
+	SET_USB_LIODN(2, "fsl-usb2-dr", 94),
+
+	SET_SATA_LIODN(1, 95),
+	SET_SATA_LIODN(2, 96),
+
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 195),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 196),
+	SET_PCI_LIODN_BASE(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 197),
+
+	SET_DMA_LIODN(1, 193),
+	SET_DMA_LIODN(2, 194),
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+	SET_FMAN_RX_1G_LIODN(1, 0, 6),
+	SET_FMAN_RX_1G_LIODN(1, 1, 7),
+	SET_FMAN_RX_1G_LIODN(1, 2, 8),
+	SET_FMAN_RX_1G_LIODN(1, 3, 9),
+	SET_FMAN_RX_1G_LIODN(1, 4, 10),
+	SET_FMAN_RX_10G_LIODN(1, 0, 11),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+	SET_FMAN_RX_1G_LIODN(2, 0, 12),
+	SET_FMAN_RX_1G_LIODN(2, 1, 13),
+	SET_FMAN_RX_1G_LIODN(2, 2, 14),
+	SET_FMAN_RX_1G_LIODN(2, 3, 15),
+	SET_FMAN_RX_1G_LIODN(2, 4, 16),
+	SET_FMAN_RX_10G_LIODN(2, 0, 17),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+	SET_SEC_JR_LIODN_ENTRY(0, 129, 130),
+	SET_SEC_JR_LIODN_ENTRY(1, 131, 132),
+	SET_SEC_JR_LIODN_ENTRY(2, 133, 134),
+	SET_SEC_JR_LIODN_ENTRY(3, 135, 136),
+	SET_SEC_RTIC_LIODN_ENTRY(a, 89),
+	SET_SEC_RTIC_LIODN_ENTRY(b, 90),
+	SET_SEC_RTIC_LIODN_ENTRY(c, 91),
+	SET_SEC_RTIC_LIODN_ENTRY(d, 92),
+	SET_SEC_DECO_LIODN_ENTRY(0, 139, 140),
+	SET_SEC_DECO_LIODN_ENTRY(1, 141, 142),
+	SET_SEC_DECO_LIODN_ENTRY(2, 143, 144),
+	SET_SEC_DECO_LIODN_ENTRY(3, 145, 146),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+struct liodn_id_table raide_liodn_tbl[] = {
+	SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 0, 60),
+	SET_RAID_ENGINE_JQ_LIODN_ENTRY(0, 1, 61),
+	SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 0, 62),
+	SET_RAID_ENGINE_JQ_LIODN_ENTRY(1, 1, 63),
+};
+int raide_liodn_tbl_sz = ARRAY_SIZE(raide_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(64, 101),
+#ifdef CONFIG_SYS_DPAA_FMAN
+	[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(32),
+#endif
+#if (CONFIG_SYS_NUM_FMAN == 2)
+	[FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(160),
+#endif
+#ifdef CONFIG_SYS_FSL_RAID_ENGINE
+	[FSL_HW_PORTAL_RAID_ENGINE]  = SET_LIODN_BASE_1(49),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/p5040_serdes.c b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
new file mode 100644
index 0000000..890b88e
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/p5040_serdes.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet_serdes.h"
+
+/*
+ * Note: For P5040, the fourth SerDes bank (with two lanes) is on SerDes2, but
+ * U-boot only supports one SerDes controller.  Therefore, we ignore bank 4 in
+ * this table.  This works because most of the SerDes code is for errata
+ * work-arounds, and there are no P5040 errata that effect bank 4.
+ */
+
+static u8 serdes_cfg_tbl[][SRDS_MAX_LANES] = {
+	[0x00] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2, */ },
+	[0x01] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+		SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1,
+		XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+		XAUI_FM2, /* SATA1, SATA2 */ },
+	[0x02] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM1_DTSEC3,
+		SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+		XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2,
+		XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+	[0x03] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, SGMII_FM2_DTSEC1,
+		SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3,
+		SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+		/* SATA1, SATA2 */ },
+	[0x04] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM2_DTSEC1,
+		SGMII_FM2_DTSEC2, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3,
+		SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+		/* SATA1, SATA2 */ },
+	[0x05] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE3, SGMII_FM1_DTSEC3,
+		SGMII_FM1_DTSEC4, SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4,
+		XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2,
+		XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+	[0x06] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4,
+		XAUI_FM2, XAUI_FM2, XAUI_FM2, XAUI_FM2, /* SATA1, SATA2 */ },
+	[0x07] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1,
+		SGMII_FM1_DTSEC3, SGMII_FM2_DTSEC4, XAUI_FM1, XAUI_FM1,
+		XAUI_FM1, XAUI_FM1, XAUI_FM2, XAUI_FM2, XAUI_FM2,
+		XAUI_FM2, /* SATA1, SATA2 */ },
+	[0x11] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+		AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, NONE, NONE, SATA1, SATA2,
+		/* NONE, NONE */ },
+	[0x15] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2,
+		AURORA, AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1,
+		NONE, NONE, SATA1, SATA2, /* NONE, NONE */ },
+	[0x2a] = {PCIE1, PCIE1, PCIE3, PCIE3, PCIE2, PCIE2, PCIE2, PCIE2,
+		AURORA, AURORA, SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, XAUI_FM2, XAUI_FM2,
+		XAUI_FM2, XAUI_FM2, /* NONE, NONE */ },
+	[0x34] = {PCIE1, PCIE1, PCIE1, PCIE1, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA,
+		AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE,
+		NONE, SATA1, SATA2, /* NONE, NONE */ },
+	[0x35] = {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA, AURORA, XAUI_FM1,
+		XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE, NONE, SATA1, SATA2,
+		/* NONE, NONE */ },
+	[0x36] = {PCIE1, PCIE1, PCIE3, PCIE3, SGMII_FM1_DTSEC1,
+		SGMII_FM1_DTSEC2, SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4, AURORA,
+		AURORA, XAUI_FM1, XAUI_FM1, XAUI_FM1, XAUI_FM1, NONE,
+		NONE, SATA1, SATA2, /* NONE, NONE */ },
+};
+
+enum srds_prtcl serdes_get_prtcl(int cfg, int lane)
+{
+	if (!serdes_lane_enabled(lane))
+		return NONE;
+
+	return serdes_cfg_tbl[cfg][lane];
+}
+
+int is_serdes_prtcl_valid(u32 prtcl)
+{
+	int i;
+
+	if (prtcl > ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (serdes_cfg_tbl[prtcl][i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/portals.c b/arch/powerpc/cpu/mpc85xx/portals.c
index 6199633..b59ef69 100644
--- a/arch/powerpc/cpu/mpc85xx/portals.c
+++ b/arch/powerpc/cpu/mpc85xx/portals.c
@@ -182,14 +182,18 @@
 {
 	int off, err;
 	unsigned int maj, min;
+	unsigned int ip_cfg;
 	u32 rev_1 = in_be32(&qman->ip_rev_1);
+	u32 rev_2 = in_be32(&qman->ip_rev_2);
 	char compat[64];
 	int compat_len;
 
 	maj = (rev_1 >> 8) & 0xff;
 	min = rev_1 & 0xff;
+	ip_cfg = rev_2 & 0xff;
 
-	compat_len = sprintf(compat, "fsl,qman-portal-%u.%u", maj, min) + 1;
+	compat_len = sprintf(compat, "fsl,qman-portal-%u.%u.%u",
+					maj, min, ip_cfg) + 1;
 	compat_len += sprintf(compat + compat_len, "fsl,qman-portal") + 1;
 
 	off = fdt_node_offset_by_compatible(blob, -1, "fsl,qman-portal");
@@ -267,14 +271,19 @@
 {
 	int off, err;
 	unsigned int maj, min;
+	unsigned int ip_cfg;
 	u32 rev_1 = in_be32(&bman->ip_rev_1);
+	u32 rev_2 = in_be32(&bman->ip_rev_2);
 	char compat[64];
 	int compat_len;
 
 	maj = (rev_1 >> 8) & 0xff;
 	min = rev_1 & 0xff;
 
-	compat_len = sprintf(compat, "fsl,bman-portal-%u.%u", maj, min) + 1;
+	ip_cfg = rev_2 & 0xff;
+
+	compat_len = sprintf(compat, "fsl,bman-portal-%u.%u.%u",
+				 maj, min, ip_cfg) + 1;
 	compat_len += sprintf(compat + compat_len, "fsl,bman-portal") + 1;
 
 	off = fdt_node_offset_by_compatible(blob, -1, "fsl,bman-portal");
diff --git a/arch/powerpc/cpu/mpc85xx/release.S b/arch/powerpc/cpu/mpc85xx/release.S
index 22e73e0..4ba44a9 100644
--- a/arch/powerpc/cpu/mpc85xx/release.S
+++ b/arch/powerpc/cpu/mpc85xx/release.S
@@ -150,29 +150,33 @@
 #define toreset(x) (x - __secondary_start_page + 0xfffff000)
 
 	/* get our PIR to figure out our table entry */
-	lis	r3,toreset(__spin_table)@h
-	ori	r3,r3,toreset(__spin_table)@l
+	lis	r3,toreset(__spin_table_addr)@h
+	ori	r3,r3,toreset(__spin_table_addr)@l
+	lwz	r3,0(r3)
 
-	/* r10 has the base address for the entry */
+	/*
+	 * r10 has the base address for the entry.
+	 * we cannot access it yet before setting up a new TLB
+	 */
 	mfspr	r0,SPRN_PIR
 #if	defined(CONFIG_E6500)
 /*
  * PIR definition for E6500
  * 0-17 Reserved (logic 0s)
- * 8-19 CHIP_ID,    2’b00      - SoC 1
+ * 8-19 CHIP_ID,    2'b00      - SoC 1
  *                  all others - reserved
- * 20-24 CLUSTER_ID 5’b00000   - CCM 1
+ * 20-24 CLUSTER_ID 5'b00000   - CCM 1
  *                  all others - reserved
- * 25-26 CORE_CLUSTER_ID 2’b00 - cluster 1
- *                       2’b01 - cluster 2
- *                       2’b10 - cluster 3
- *                       2’b11 - cluster 4
- * 27-28 CORE_ID         2’b00 - core 0
- *                       2’b01 - core 1
- *                       2’b10 - core 2
- *                       2’b11 - core 3
- * 29-31 THREAD_ID       3’b000 - thread 0
- *                       3’b001 - thread 1
+ * 25-26 CORE_CLUSTER_ID 2'b00 - cluster 1
+ *                       2'b01 - cluster 2
+ *                       2'b10 - cluster 3
+ *                       2'b11 - cluster 4
+ * 27-28 CORE_ID         2'b00 - core 0
+ *                       2'b01 - core 1
+ *                       2'b10 - core 2
+ *                       2'b11 - core 3
+ * 29-31 THREAD_ID       3'b000 - thread 0
+ *                       3'b001 - thread 1
  */
 	rlwinm  r4,r0,29,25,31
 #elif	defined(CONFIG_E500MC)
@@ -180,16 +184,9 @@
 #else
 	mr	r4,r0
 #endif
-	slwi	r8,r4,5
+	slwi	r8,r4,6	/* spin table is padded to 64 byte */
 	add	r10,r3,r8
 
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
-	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
-	slwi	r8,r4,1
-	addi	r8,r8,32
-	mtspr	L1CSR2,r8
-#endif
-
 #ifdef CONFIG_E6500
 	mfspr	r0,SPRN_PIR
 	/*
@@ -209,6 +206,13 @@
 
 	mtspr	SPRN_PIR,r4	/* write to PIR register */
 
+#ifdef CONFIG_SYS_CACHE_STASHING
+	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
+	slwi	r8,r4,1
+	addi	r8,r8,32
+	mtspr	L1CSR2,r8
+#endif
+
 #if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
 	defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
 	/*
@@ -277,73 +281,111 @@
 	beq	2b
 #endif
 3:
+	/* setup mapping for the spin table, WIMGE=0b00100 */
+	lis	r13,toreset(__spin_table_addr)@h
+	ori	r13,r13,toreset(__spin_table_addr)@l
+	lwz	r13,0(r13)
+	/* mask by 4K */
+	rlwinm	r13,r13,0,0,19
 
-#define EPAPR_MAGIC		(0x45504150)
+	lis	r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
+	mtspr	SPRN_MAS0,r11
+	lis	r11,(MAS1_VALID|MAS1_IPROT)@h
+	ori	r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
+	mtspr	SPRN_MAS1,r11
+	oris	r11,r13,(MAS2_M|MAS2_G)@h
+	ori	r11,r13,(MAS2_M|MAS2_G)@l
+	mtspr	SPRN_MAS2,r11
+	oris	r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
+	ori	r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
+	mtspr	SPRN_MAS3,r11
+	li	r11,0
+	mtspr	SPRN_MAS7,r11
+	tlbwe
+
+	/*
+	 * __bootpg_addr has the address of __second_half_boot_page
+	 * jump there in AS=1 space with cache enabled
+	 */
+	lis	r13,toreset(__bootpg_addr)@h
+	ori	r13,r13,toreset(__bootpg_addr)@l
+	lwz	r11,0(r13)
+	mtspr	SPRN_SRR0,r11
+	mfmsr	r13
+	ori	r12,r13,MSR_IS|MSR_DS@l
+	mtspr	SPRN_SRR1,r12
+	rfi
+
+	/*
+	 * Allocate some space for the SDRAM address of the bootpg.
+	 * This variable has to be in the boot page so that it can
+	 * be accessed by secondary cores when they come out of reset.
+	 */
+	.align L1_CACHE_SHIFT
+	.globl __bootpg_addr
+__bootpg_addr:
+	.long	0
+
+	.global __spin_table_addr
+__spin_table_addr:
+	.long	0
+
+	/*
+	 * This variable is set by cpu_init_r() after parsing hwconfig
+	 * to enable workaround for erratum NMG_CPU_A011.
+	 */
+	.align L1_CACHE_SHIFT
+	.global enable_cpu_a011_workaround
+enable_cpu_a011_workaround:
+	.long	1
+
+	/* Fill in the empty space.  The actual reset vector is
+	 * the last word of the page */
+__secondary_start_code_end:
+	.space 4092 - (__secondary_start_code_end - __secondary_start_page)
+__secondary_reset_vector:
+	b	__secondary_start_page
+
+
+/* this is a separated page for the spin table and cacheable boot code */
+	.align L1_CACHE_SHIFT
+	.global __second_half_boot_page
+__second_half_boot_page:
+#define EPAPR_MAGIC		0x45504150
 #define ENTRY_ADDR_UPPER	0
 #define ENTRY_ADDR_LOWER	4
 #define ENTRY_R3_UPPER		8
 #define ENTRY_R3_LOWER		12
 #define ENTRY_RESV		16
 #define ENTRY_PIR		20
-#define ENTRY_R6_UPPER		24
-#define ENTRY_R6_LOWER		28
-#define ENTRY_SIZE		32
-
-	/* setup the entry */
+#define ENTRY_SIZE		64
+	/*
+	 * setup the entry
+	 * r10 has the base address of the spin table.
+	 * spin table is defined as
+	 * struct {
+	 *	uint64_t entry_addr;
+	 *	uint64_t r3;
+	 *	uint32_t rsvd1;
+	 *	uint32_t pir;
+	 * };
+	 * we pad this struct to 64 bytes so each entry is in its own cacheline
+	 */
 	li	r3,0
 	li	r8,1
-	stw	r4,ENTRY_PIR(r10)
+	mfspr	r4,SPRN_PIR
 	stw	r3,ENTRY_ADDR_UPPER(r10)
-	stw	r8,ENTRY_ADDR_LOWER(r10)
 	stw	r3,ENTRY_R3_UPPER(r10)
 	stw	r4,ENTRY_R3_LOWER(r10)
-	stw	r3,ENTRY_R6_UPPER(r10)
-	stw	r3,ENTRY_R6_LOWER(r10)
-
-	/* load r13 with the address of the 'bootpg' in SDRAM */
-	lis	r13,toreset(__bootpg_addr)@h
-	ori	r13,r13,toreset(__bootpg_addr)@l
-	lwz	r13,0(r13)
-
-	/* setup mapping for AS = 1, and jump there */
-	lis	r11,(MAS0_TLBSEL(1)|MAS0_ESEL(1))@h
-	mtspr	SPRN_MAS0,r11
-	lis	r11,(MAS1_VALID|MAS1_IPROT)@h
-	ori	r11,r11,(MAS1_TS|MAS1_TSIZE(BOOKE_PAGESZ_4K))@l
-	mtspr	SPRN_MAS1,r11
-	oris	r11,r13,(MAS2_I|MAS2_G)@h
-	ori	r11,r13,(MAS2_I|MAS2_G)@l
-	mtspr	SPRN_MAS2,r11
-	oris	r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@h
-	ori	r11,r13,(MAS3_SX|MAS3_SW|MAS3_SR)@l
-	mtspr	SPRN_MAS3,r11
-	tlbwe
-
-	bl	1f
-1:	mflr	r11
-	/*
-	 * OR in 0xfff to create a mask of the bootpg SDRAM address.  We use
-	 * this mask to fixup the cpu spin table and the address that we want
-	 * to jump to, eg change them from 0xfffffxxx to 0x7ffffxxx if the
-	 * bootpg is at 0x7ffff000 in SDRAM.
-	 */
-	ori	r13,r13,0xfff
-	and	r11, r11, r13
-	and	r10, r10, r13
-
-	addi	r11,r11,(2f-1b)
-	mfmsr	r13
-	ori	r12,r13,MSR_IS|MSR_DS@l
-
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r12
-	rfi
+	stw	r3,ENTRY_RESV(r10)
+	stw	r4,ENTRY_PIR(r10)
+	msync
+	stw	r8,ENTRY_ADDR_LOWER(r10)
 
 	/* spin waiting for addr */
-2:
-	lwz	r4,ENTRY_ADDR_LOWER(r10)
+3:	lwz	r4,ENTRY_ADDR_LOWER(r10)
 	andi.	r11,r4,1
-	bne	2b
+	bne	3b
 	isync
 
 	/* setup IVORs to match fixed offsets */
@@ -362,11 +404,20 @@
 	/* mask by ~64M to setup our tlb we will jump to */
 	rlwinm	r12,r4,0,0,5
 
-	/* setup r3, r4, r5, r6, r7, r8, r9 */
+	/*
+	 * setup r3, r4, r5, r6, r7, r8, r9
+	 * r3 contains the value to put in the r3 register at secondary cpu
+	 * entry. The high 32-bits are ignored on 32-bit chip implementations.
+	 * 64-bit chip implementations however shall load all 64-bits
+	 */
+#ifdef CONFIG_SYS_PPC64
+	ld	r3,ENTRY_R3_UPPER(r10)
+#else
 	lwz	r3,ENTRY_R3_LOWER(r10)
+#endif
 	li	r4,0
 	li	r5,0
-	lwz	r6,ENTRY_R6_LOWER(r10)
+	li	r6,0
 	lis	r7,(64*1024*1024)@h
 	li	r8,0
 	li	r9,0
@@ -404,32 +455,10 @@
 	mtspr	SPRN_SRR1,r13
 	rfi
 
-	/*
-	 * Allocate some space for the SDRAM address of the bootpg.
-	 * This variable has to be in the boot page so that it can
-	 * be accessed by secondary cores when they come out of reset.
-	 */
-	.globl __bootpg_addr
-__bootpg_addr:
-	.long	0
 
-	.align L1_CACHE_SHIFT
+	.align 6
 	.globl __spin_table
 __spin_table:
 	.space CONFIG_MAX_CPUS*ENTRY_SIZE
-
-	/*
-	 * This variable is set by cpu_init_r() after parsing hwconfig
-	 * to enable workaround for erratum NMG_CPU_A011.
-	 */
-	.align L1_CACHE_SHIFT
-	.global enable_cpu_a011_workaround
-enable_cpu_a011_workaround:
-	.long	1
-
-	/* Fill in the empty space.  The actual reset vector is
-	 * the last word of the page */
-__secondary_start_code_end:
-	.space 4092 - (__secondary_start_code_end - __secondary_start_page)
-__secondary_reset_vector:
-	b	__secondary_start_page
+__spin_table_end:
+	.space 4096 - (__spin_table_end - __spin_table)
diff --git a/arch/powerpc/cpu/mpc85xx/serial_scc.c b/arch/powerpc/cpu/mpc85xx/serial_scc.c
index fe9af55..6345362 100644
--- a/arch/powerpc/cpu/mpc85xx/serial_scc.c
+++ b/arch/powerpc/cpu/mpc85xx/serial_scc.c
@@ -220,13 +220,6 @@
 	tbdf->cbd_sc |= BD_SC_READY;
 }
 
-static void mpc85xx_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static int mpc85xx_serial_getc(void)
 {
 	volatile cbd_t		*rbdf;
@@ -268,7 +261,7 @@
 	.stop	= NULL,
 	.setbrg	= mpc85xx_serial_setbrg,
 	.putc	= mpc85xx_serial_putc,
-	.puts	= mpc85xx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mpc85xx_serial_getc,
 	.tstc	= mpc85xx_serial_tstc,
 };
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index abfeb26..801ee07 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -39,6 +39,10 @@
 void get_sys_info (sys_info_t * sysInfo)
 {
 	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#ifdef CONFIG_FSL_IFC
+	struct fsl_ifc *ifc_regs = (void *)CONFIG_SYS_IFC_ADDR;
+	u32 ccr;
+#endif
 #ifdef CONFIG_FSL_CORENET
 	volatile ccsr_clk_t *clk = (void *)(CONFIG_SYS_FSL_CORENET_CLK_ADDR);
 	unsigned int cpu;
@@ -72,16 +76,22 @@
 		[13] = 2,	/* CC4 PPL / 2 */
 		[14] = 4,	/* CC4 PPL / 4 */
 	};
-	uint lcrr_div, i, freqCC_PLL[4], rcw_tmp;
-	uint ratio[4];
+	uint i, freqCC_PLL[6], rcw_tmp;
+	uint ratio[6];
 	unsigned long sysclk = CONFIG_SYS_CLK_FREQ;
 	uint mem_pll_rat;
 
 	sysInfo->freqSystemBus = sysclk;
+#ifdef CONFIG_DDR_CLK_FREQ
+	sysInfo->freqDDRBus = CONFIG_DDR_CLK_FREQ;
+#else
 	sysInfo->freqDDRBus = sysclk;
+#endif
 
 	sysInfo->freqSystemBus *= (in_be32(&gur->rcwsr[0]) >> 25) & 0x1f;
-	mem_pll_rat = (in_be32(&gur->rcwsr[0]) >> 17) & 0x1f;
+	mem_pll_rat = (in_be32(&gur->rcwsr[0]) >>
+			FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT)
+			& FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK;
 	if (mem_pll_rat > 2)
 		sysInfo->freqDDRBus *= mem_pll_rat;
 	else
@@ -91,13 +101,136 @@
 	ratio[1] = (in_be32(&clk->pllc2gsr) >> 1) & 0x3f;
 	ratio[2] = (in_be32(&clk->pllc3gsr) >> 1) & 0x3f;
 	ratio[3] = (in_be32(&clk->pllc4gsr) >> 1) & 0x3f;
-	for (i = 0; i < 4; i++) {
+	ratio[4] = (in_be32(&clk->pllc5gsr) >> 1) & 0x3f;
+	ratio[5] = (in_be32(&clk->pllc6gsr) >> 1) & 0x3f;
+	for (i = 0; i < 6; i++) {
 		if (ratio[i] > 4)
 			freqCC_PLL[i] = sysclk * ratio[i];
 		else
 			freqCC_PLL[i] = sysInfo->freqSystemBus * ratio[i];
 	}
-	rcw_tmp = in_be32(&gur->rcwsr[3]);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+	/*
+	 * Each cluster has up to 4 cores, sharing the same PLL selection.
+	 * The cluster assignment is fixed per SoC. There is no way identify the
+	 * assignment so far, presuming the "first configuration" which is to
+	 * fill the lower cluster group first before moving up to next group.
+	 * PLL1, PLL2, PLL3 are cluster group A, feeding core 0~3 on cluster 1
+	 * and core 4~7 on cluster 2
+	 * PLL4, PLL5, PLL6 are cluster group B, feeding core 8~11 on cluster 3
+	 * and core 12~15 on cluster 4 if existing
+	 */
+	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
+		u32 c_pll_sel = (in_be32(&clk->clkc0csr + (cpu / 4) * 8) >> 27)
+				& 0xf;
+		u32 cplx_pll = core_cplx_PLL[c_pll_sel];
+		if (cplx_pll > 3)
+			printf("Unsupported architecture configuration"
+				" in function %s\n", __func__);
+		cplx_pll += (cpu / 8) * 3;
+
+		sysInfo->freqProcessor[cpu] =
+			 freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
+	}
+#define PME_CLK_SEL	0xe0000000
+#define PME_CLK_SHIFT	29
+#define FM1_CLK_SEL	0x1c000000
+#define FM1_CLK_SHIFT	26
+	rcw_tmp = in_be32(&gur->rcwsr[7]);
+
+#ifdef CONFIG_SYS_DPAA_PME
+	switch ((rcw_tmp & PME_CLK_SEL) >> PME_CLK_SHIFT) {
+	case 1:
+		sysInfo->freqPME = freqCC_PLL[0];
+		break;
+	case 2:
+		sysInfo->freqPME = freqCC_PLL[0] / 2;
+		break;
+	case 3:
+		sysInfo->freqPME = freqCC_PLL[0] / 3;
+		break;
+	case 4:
+		sysInfo->freqPME = freqCC_PLL[0] / 4;
+		break;
+	case 6:
+		sysInfo->freqPME = freqCC_PLL[1] / 2;
+		break;
+	case 7:
+		sysInfo->freqPME = freqCC_PLL[1] / 3;
+		break;
+	default:
+		printf("Error: Unknown PME clock select!\n");
+	case 0:
+		sysInfo->freqPME = sysInfo->freqSystemBus / 2;
+		break;
+
+	}
+#endif
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	sysInfo->freqQMAN = sysInfo->freqSystemBus / 2;
+#endif
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	switch ((rcw_tmp & FM1_CLK_SEL) >> FM1_CLK_SHIFT) {
+	case 1:
+		sysInfo->freqFMan[0] = freqCC_PLL[3];
+		break;
+	case 2:
+		sysInfo->freqFMan[0] = freqCC_PLL[3] / 2;
+		break;
+	case 3:
+		sysInfo->freqFMan[0] = freqCC_PLL[3] / 3;
+		break;
+	case 4:
+		sysInfo->freqFMan[0] = freqCC_PLL[3] / 4;
+		break;
+	case 6:
+		sysInfo->freqFMan[0] = freqCC_PLL[4] / 2;
+		break;
+	case 7:
+		sysInfo->freqFMan[0] = freqCC_PLL[4] / 3;
+		break;
+	default:
+		printf("Error: Unknown FMan1 clock select!\n");
+	case 0:
+		sysInfo->freqFMan[0] = sysInfo->freqSystemBus / 2;
+		break;
+	}
+#if (CONFIG_SYS_NUM_FMAN) == 2
+#define FM2_CLK_SEL	0x00000038
+#define FM2_CLK_SHIFT	3
+	rcw_tmp = in_be32(&gur->rcwsr[15]);
+	switch ((rcw_tmp & FM2_CLK_SEL) >> FM2_CLK_SHIFT) {
+	case 1:
+		sysInfo->freqFMan[1] = freqCC_PLL[4];
+		break;
+	case 2:
+		sysInfo->freqFMan[1] = freqCC_PLL[4] / 2;
+		break;
+	case 3:
+		sysInfo->freqFMan[1] = freqCC_PLL[4] / 3;
+		break;
+	case 4:
+		sysInfo->freqFMan[1] = freqCC_PLL[4] / 4;
+		break;
+	case 6:
+		sysInfo->freqFMan[1] = freqCC_PLL[3] / 2;
+		break;
+	case 7:
+		sysInfo->freqFMan[1] = freqCC_PLL[3] / 3;
+		break;
+	default:
+		printf("Error: Unknown FMan2 clock select!\n");
+	case 0:
+		sysInfo->freqFMan[1] = sysInfo->freqSystemBus / 2;
+		break;
+	}
+#endif	/* CONFIG_SYS_NUM_FMAN == 2 */
+#endif	/* CONFIG_SYS_DPAA_FMAN */
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
 	for_each_cpu(i, cpu, cpu_numcores(), cpu_mask()) {
 		u32 c_pll_sel = (in_be32(&clk->clkc0csr + cpu*8) >> 27) & 0xf;
 		u32 cplx_pll = core_cplx_PLL[c_pll_sel];
@@ -105,13 +238,14 @@
 		sysInfo->freqProcessor[cpu] =
 			 freqCC_PLL[cplx_pll] / core_cplx_PLL_div[c_pll_sel];
 	}
-
 #define PME_CLK_SEL	0x80000000
 #define FM1_CLK_SEL	0x40000000
 #define FM2_CLK_SEL	0x20000000
 #define HWA_ASYNC_DIV	0x04000000
 #if (CONFIG_SYS_FSL_NUM_CC_PLLS == 2)
 #define HWA_CC_PLL	1
+#elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 3)
+#define HWA_CC_PLL	2
 #elif (CONFIG_SYS_FSL_NUM_CC_PLLS == 4)
 #define HWA_CC_PLL	2
 #else
@@ -151,11 +285,10 @@
 #endif
 #endif
 
-#else
-	uint plat_ratio,e500_ratio,half_freqSystemBus;
-#if defined(CONFIG_FSL_LBC)
-	uint lcrr_div;
-#endif
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+#else /* CONFIG_FSL_CORENET */
+	uint plat_ratio, e500_ratio, half_freqSystemBus;
 	int i;
 #ifdef CONFIG_QE
 	__maybe_unused u32 qe_ratio;
@@ -202,6 +335,7 @@
 #endif /* CONFIG_FSL_CORENET */
 
 #if defined(CONFIG_FSL_LBC)
+	uint lcrr_div;
 #if defined(CONFIG_SYS_LBC_LCRR)
 	/* We will program LCRR to this value later */
 	lcrr_div = CONFIG_SYS_LBC_LCRR & LCRR_CLKDIV;
@@ -228,6 +362,13 @@
 		sysInfo->freqLocalBus = lcrr_div;
 	}
 #endif
+
+#if defined(CONFIG_FSL_IFC)
+	ccr = in_be32(&ifc_regs->ifc_ccr);
+	ccr = ((ccr & IFC_CCR_CLK_DIV_MASK) >> IFC_CCR_CLK_DIV_SHIFT) + 1;
+
+	sysInfo->freqLocalBus = sysInfo->freqSystemBus / ccr;
+#endif
 }
 
 
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S
index 9e04257..ac17f9d 100644
--- a/arch/powerpc/cpu/mpc85xx/start.S
+++ b/arch/powerpc/cpu/mpc85xx/start.S
@@ -169,7 +169,7 @@
 	 *
 	 */
 
-#if defined(CONFIG_E500MC) && defined(CONFIG_SYS_CACHE_STASHING)
+#ifdef CONFIG_SYS_CACHE_STASHING
 	/* set stash id to (coreID) * 2 + 32 + L1 CT (0) */
 	li	r2,(32 + 0)
 	mtspr	L1CSR2,r2
@@ -211,6 +211,77 @@
 	andi.	r1,r3,L1CSR0_DCE@l
 	beq	2b
 
+	.macro	create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch
+	lis	\scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
+	mtspr	MAS0, \scratch
+	lis	\scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS1(1, 1, 0, \ts, \tsize)@l
+	mtspr	MAS1, \scratch
+	lis	\scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+	mtspr	MAS2, \scratch
+	lis	\scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
+	mtspr	MAS3, \scratch
+	lis	\scratch, \phy_high@h
+	ori	\scratch, \scratch, \phy_high@l
+	mtspr	MAS7, \scratch
+	isync
+	msync
+	tlbwe
+	isync
+	.endm
+
+	.macro	create_tlb0_entry esel ts tsize epn wimg rpn perm phy_high scratch
+	lis	\scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
+	mtspr	MAS0, \scratch
+	lis	\scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS1(1, 0, 0, \ts, \tsize)@l
+	mtspr	MAS1, \scratch
+	lis	\scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+	mtspr	MAS2, \scratch
+	lis	\scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS3(\rpn, 0, \perm)@l
+	mtspr	MAS3, \scratch
+	lis	\scratch, \phy_high@h
+	ori	\scratch, \scratch, \phy_high@l
+	mtspr	MAS7, \scratch
+	isync
+	msync
+	tlbwe
+	isync
+	.endm
+
+	.macro	delete_tlb1_entry esel scratch
+	lis	\scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@l
+	mtspr	MAS0, \scratch
+	li	\scratch, 0
+	mtspr	MAS1, \scratch
+	isync
+	msync
+	tlbwe
+	isync
+	.endm
+
+	.macro	delete_tlb0_entry esel epn wimg scratch
+	lis	\scratch, FSL_BOOKE_MAS0(0, \esel, 0)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS0(0, \esel, 0)@l
+	mtspr	MAS0, \scratch
+	li	\scratch, 0
+	mtspr	MAS1, \scratch
+	lis	\scratch, FSL_BOOKE_MAS2(\epn, \wimg)@h
+	ori	\scratch, \scratch, FSL_BOOKE_MAS2(\epn, \wimg)@l
+	mtspr	MAS2, \scratch
+	isync
+	msync
+	tlbwe
+	isync
+	.endm
+
 #if defined(CONFIG_SYS_PPC_E500_DEBUG_TLB) && !defined(CONFIG_NAND_SPL)
 /*
  * TLB entry for debuggging in AS1
@@ -220,61 +291,35 @@
  * in AS1.
  */
 
-	lis     r6,FSL_BOOKE_MAS0(1,
-			CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@h
-	ori     r6,r6,FSL_BOOKE_MAS0(1,
-			CONFIG_SYS_PPC_E500_DEBUG_TLB, 0)@l
-
 #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
 /*
  * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
  * bacause flash's virtual address maps to 0xff800000 - 0xffffffff.
  * and this window is outside of 4K boot window.
  */
-	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@h
-	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_4M)@l
+	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+		0, BOOKE_PAGESZ_4M, \
+		CONFIG_SYS_MONITOR_BASE & 0xffc00000,  MAS2_I|MAS2_G, \
+		0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
 
-	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
-							(MAS2_I|MAS2_G))@h
-	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000,
-							(MAS2_I|MAS2_G))@l
-
-	/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
-	lis     r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
 #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
-	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@h
-	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_1M)@l
-
-	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@h
-	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,(MAS2_I|MAS2_G))@l
-
-	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
-						(MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
-						(MAS3_SX|MAS3_SW|MAS3_SR))@l
+	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+		0, BOOKE_PAGESZ_1M, \
+		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+		CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
 #else
 /*
  * TLB entry is created for IVPR + IVOR15 to map on valid OP code address
  * because "nexti" will resize TLB to 4K
  */
-	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@h
-	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 0, BOOKE_PAGESZ_256K)@l
-
-	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I))@h
-	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE,
-							(MAS2_I))@l
-	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
-						(MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0,
-						(MAS3_SX|MAS3_SW|MAS3_SR))@l
+	create_tlb1_entry CONFIG_SYS_PPC_E500_DEBUG_TLB, \
+		0, BOOKE_PAGESZ_256K, \
+		CONFIG_SYS_MONITOR_BASE, MAS2_I, \
+		CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
 #endif
-	mtspr   MAS0,r6
-	mtspr   MAS1,r7
-	mtspr   MAS2,r8
-	mtspr   MAS3,r9
-	tlbwe
-	isync
 #endif
 
 /*
@@ -392,27 +437,11 @@
 	 */
 
 	/* create a temp mapping TLB0[0] for LBCR  */
-	lis     r6,FSL_BOOKE_MAS0(0, 0, 0)@h
-	ori     r6,r6,FSL_BOOKE_MAS0(0, 0, 0)@l
-
-	lis     r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
-	ori     r7,r7,FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
-
-	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@h
-	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G)@l
-
-	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
-						(MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_LBC_ADDR, 0,
-						(MAS3_SX|MAS3_SW|MAS3_SR))@l
-
-	mtspr   MAS0,r6
-	mtspr   MAS1,r7
-	mtspr   MAS2,r8
-	mtspr   MAS3,r9
-	isync
-	msync
-	tlbwe
+	create_tlb0_entry 0, \
+		0, BOOKE_PAGESZ_4K, \
+		CONFIG_SYS_LBC_ADDR, MAS2_I|MAS2_G, \
+		CONFIG_SYS_LBC_ADDR, MAS3_SW|MAS3_SR, \
+		0, r6
 
 	/* Set LBCR register */
 	lis     r4,CONFIG_SYS_LBCR_ADDR@h
@@ -551,49 +580,22 @@
 	ori	r8, r8, CONFIG_SYS_CCSRBAR@l
 	lis	r9, (CONFIG_SYS_CCSRBAR + 0x1000)@h
 	ori	r9, r9, (CONFIG_SYS_CCSRBAR + 0x1000)@l
-	lis     r0, FSL_BOOKE_MAS0(0, 0, 0)@h
-	ori     r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
-	lis     r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@h
-	ori     r1, r1, FSL_BOOKE_MAS1(1, 0, 0, 0, BOOKE_PAGESZ_4K)@l
-	lis     r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
-	ori     r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
-	lis     r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@h
-	ori     r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_PHYS_LOW, 0, (MAS3_SW|MAS3_SR))@l
-#ifdef CONFIG_ENABLE_36BIT_PHYS
-	lis	r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@h
-	ori	r7, r7, CONFIG_SYS_CCSRBAR_PHYS_HIGH@l
-	mtspr   MAS7, r7
-#endif
-	mtspr   MAS0, r0
-	mtspr   MAS1, r1
-	mtspr   MAS2, r2
-	mtspr   MAS3, r3
-	isync
-	msync
-	tlbwe
-
+	create_tlb0_entry 0, \
+		0, BOOKE_PAGESZ_4K, \
+		CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, \
+		CONFIG_SYS_CCSRBAR_PHYS_LOW, MAS3_SW|MAS3_SR, \
+		CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
 	/*
 	 * Create a TLB for the current location of CCSR.  Register R9 is reserved
 	 * for the virtual address of this TLB (CONFIG_SYS_CCSRBAR + 0x1000).
 	 */
 create_ccsr_old_tlb:
-	lis     r0, FSL_BOOKE_MAS0(0, 1, 0)@h
-	ori     r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
-	lis     r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
-	ori     r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
-	lis     r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@h
-	ori     r3, r3, FSL_BOOKE_MAS3(CONFIG_SYS_CCSRBAR_DEFAULT, 0, (MAS3_SW|MAS3_SR))@l
-#ifdef CONFIG_ENABLE_36BIT_PHYS
-	li	r7, 0	/* The default CCSR address is always a 32-bit number */
-	mtspr   MAS7, r7
-#endif
-	mtspr   MAS0, r0
-	/* MAS1 is the same as above */
-	mtspr   MAS2, r2
-	mtspr   MAS3, r3
-	isync
-	msync
-	tlbwe
+	create_tlb0_entry 1, \
+		0, BOOKE_PAGESZ_4K, \
+		CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, \
+		CONFIG_SYS_CCSRBAR_DEFAULT, MAS3_SW|MAS3_SR, \
+		0, r3 /* The default CCSR address is always a 32-bit number */
+
 
 	/*
 	 * We have a TLB for what we think is the current (old) CCSR.  Let's
@@ -743,29 +745,46 @@
 
 	/* Delete the temporary TLBs */
 delete_temp_tlbs:
-	lis     r0, FSL_BOOKE_MAS0(0, 0, 0)@h
-	ori     r0, r0, FSL_BOOKE_MAS0(0, 0, 0)@l
-	li	r1, 0
-	lis     r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@h
-	ori     r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR, (MAS2_I|MAS2_G))@l
-	mtspr   MAS0, r0
-	mtspr   MAS1, r1
-	mtspr   MAS2, r2
-	isync
-	msync
-	tlbwe
+	delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR, MAS2_I|MAS2_G, r3
+	delete_tlb0_entry 1, CONFIG_SYS_CCSRBAR + 0x1000, MAS2_I|MAS2_G, r3
 
-	lis     r0, FSL_BOOKE_MAS0(0, 1, 0)@h
-	ori     r0, r0, FSL_BOOKE_MAS0(0, 1, 0)@l
-	lis     r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@h
-	ori     r2, r2, FSL_BOOKE_MAS2(CONFIG_SYS_CCSRBAR + 0x1000, (MAS2_I|MAS2_G))@l
-	mtspr   MAS0, r0
-	mtspr   MAS2, r2
-	isync
-	msync
-	tlbwe
 #endif /* #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR_PHYS) */
 
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+create_ccsr_l2_tlb:
+	/*
+	 * Create a TLB for the MMR location of CCSR
+	 * to access L2CSR0 register
+	 */
+	create_tlb0_entry 0, \
+		0, BOOKE_PAGESZ_4K, \
+		CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, \
+		CONFIG_SYS_CCSRBAR_PHYS_LOW + 0xC20000, MAS3_SW|MAS3_SR, \
+		CONFIG_SYS_CCSRBAR_PHYS_HIGH, r3
+
+enable_l2_cluster_l2:
+	/* enable L2 cache */
+	lis	r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@h
+	ori	r3, r3, (CONFIG_SYS_CCSRBAR + 0xC20000)@l
+	li	r4, 33	/* stash id */
+	stw	r4, 4(r3)
+	lis	r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@h
+	ori	r4, r4, (L2CSR0_L2FI|L2CSR0_L2LFC)@l
+	sync
+	stw	r4, 0(r3)	/* invalidate L2 */
+1:	sync
+	lwz	r0, 0(r3)
+	twi	0, r0, 0
+	isync
+	and.	r1, r0, r4
+	bne	1b
+	lis	r4, L2CSR0_L2E@h
+	sync
+	stw	r4, 0(r3)	/* eanble L2 */
+delete_ccsr_l2_tlb:
+	delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3
+#endif
+
 #ifdef CONFIG_SYS_FSL_ERRATUM_A004510
 #define DCSR_LAWBARH0	(CONFIG_SYS_CCSRBAR + 0x1000)
 #define LAW_SIZE_1M	0x13
@@ -1019,82 +1038,49 @@
 
 #if !defined(CONFIG_SYS_RAMBOOT) && !defined(CONFIG_SECURE_BOOT)
 	/* create a temp mapping in AS=1 to the 4M boot window */
-	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
-	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
+	create_tlb1_entry 15, \
+		1, BOOKE_PAGESZ_4M, \
+		CONFIG_SYS_MONITOR_BASE & 0xffc00000, MAS2_I|MAS2_G, \
+		0xffc00000, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
 
-	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
-	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
-
-	/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
-	lis     r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
 #elif !defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SECURE_BOOT)
 	/* create a temp mapping in AS = 1 for Flash mapping
 	 * created by PBL for ISBC code
 	*/
-	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
-	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
-	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
-	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
-
-	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
-						(MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_PBI_FLASH_WINDOW, 0,
-						(MAS3_SX|MAS3_SW|MAS3_SR))@l
+	create_tlb1_entry 15, \
+		1, BOOKE_PAGESZ_1M, \
+		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+		CONFIG_SYS_PBI_FLASH_WINDOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
 #else
 	/*
 	 * create a temp mapping in AS=1 to the 1M CONFIG_SYS_MONITOR_BASE space, the main
 	 * image has been relocated to CONFIG_SYS_MONITOR_BASE on the second stage.
 	 */
-	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
-	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
-
-	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@h
-	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_MONITOR_BASE, (MAS2_I|MAS2_G))@l
-
-	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_MONITOR_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+	create_tlb1_entry 15, \
+		1, BOOKE_PAGESZ_1M, \
+		CONFIG_SYS_MONITOR_BASE, MAS2_I|MAS2_G, \
+		CONFIG_SYS_MONITOR_BASE, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
 #endif
 
-	mtspr   MAS0,r6
-	mtspr   MAS1,r7
-	mtspr   MAS2,r8
-	mtspr   MAS3,r9
-	isync
-	msync
-	tlbwe
-
 	/* create a temp mapping in AS=1 to the stack */
-	lis     r6,FSL_BOOKE_MAS0(1, 14, 0)@h
-	ori     r6,r6,FSL_BOOKE_MAS0(1, 14, 0)@l
-
-	lis     r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@h
-	ori     r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_16K)@l
-
-	lis     r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@h
-	ori     r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_INIT_RAM_ADDR, 0)@l
-
 #if defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) && \
     defined(CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH)
-	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
-				(MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, 0,
-				(MAS3_SX|MAS3_SW|MAS3_SR))@l
-	li      r10,CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH
-	mtspr	MAS7,r10
-#else
-	lis     r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
-	ori     r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_INIT_RAM_ADDR, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
-#endif
+	create_tlb1_entry 14, \
+		1, BOOKE_PAGESZ_16K, \
+		CONFIG_SYS_INIT_RAM_ADDR, 0, \
+		CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW, MAS3_SX|MAS3_SW|MAS3_SR, \
+		CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH, r6
 
-	mtspr   MAS0,r6
-	mtspr   MAS1,r7
-	mtspr   MAS2,r8
-	mtspr   MAS3,r9
-	isync
-	msync
-	tlbwe
+#else
+	create_tlb1_entry 14, \
+		1, BOOKE_PAGESZ_16K, \
+		CONFIG_SYS_INIT_RAM_ADDR, 0, \
+		CONFIG_SYS_INIT_RAM_ADDR, MAS3_SX|MAS3_SW|MAS3_SR, \
+		0, r6
+#endif
 
 	lis	r6,MSR_IS|MSR_DS|MSR_DE@h
 	ori	r6,r6,MSR_IS|MSR_DS|MSR_DE@l
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_ids.c b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
new file mode 100644
index 0000000..a8f16b1
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t4240_ids.c
@@ -0,0 +1,203 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+
+#ifdef CONFIG_SYS_DPAA_QBMAN
+struct qportal_info qp_info[CONFIG_SYS_QMAN_NUM_PORTALS] = {
+	/* dqrr liodn, frame data liodn, liodn off, sdest */
+	SET_QP_INFO(1, 27, 1, 0),
+	SET_QP_INFO(2, 28, 1, 0),
+	SET_QP_INFO(3, 29, 1, 1),
+	SET_QP_INFO(4, 30, 1, 1),
+	SET_QP_INFO(5, 31, 1, 2),
+	SET_QP_INFO(6, 32, 1, 2),
+	SET_QP_INFO(7, 33, 1, 3),
+	SET_QP_INFO(8, 34, 1, 3),
+	SET_QP_INFO(9, 35, 1, 4),
+	SET_QP_INFO(10, 36, 1, 4),
+	SET_QP_INFO(11, 37, 1, 5),
+	SET_QP_INFO(12, 38, 1, 5),
+	SET_QP_INFO(13, 39, 1, 6),
+	SET_QP_INFO(14, 40, 1, 6),
+	SET_QP_INFO(15, 41, 1, 7),
+	SET_QP_INFO(16, 42, 1, 7),
+	SET_QP_INFO(17, 43, 1, 8),
+	SET_QP_INFO(18, 44, 1, 8),
+	SET_QP_INFO(19, 45, 1, 9),
+	SET_QP_INFO(20, 46, 1, 9),
+	SET_QP_INFO(21, 47, 1, 10),
+	SET_QP_INFO(22, 48, 1, 10),
+	SET_QP_INFO(23, 49, 1, 11),
+	SET_QP_INFO(24, 50, 1, 11),
+	SET_QP_INFO(65, 89, 1, 0),
+	SET_QP_INFO(66, 90, 1, 0),
+	SET_QP_INFO(67, 91, 1, 1),
+	SET_QP_INFO(68, 92, 1, 1),
+	SET_QP_INFO(69, 93, 1, 2),
+	SET_QP_INFO(70, 94, 1, 2),
+	SET_QP_INFO(71, 95, 1, 3),
+	SET_QP_INFO(72, 96, 1, 3),
+	SET_QP_INFO(73, 97, 1, 4),
+	SET_QP_INFO(74, 98, 1, 4),
+	SET_QP_INFO(75, 99, 1, 5),
+	SET_QP_INFO(76, 100, 1, 5),
+	SET_QP_INFO(77, 101, 1, 6),
+	SET_QP_INFO(78, 102, 1, 6),
+	SET_QP_INFO(79, 103, 1, 7),
+	SET_QP_INFO(80, 104, 1, 7),
+	SET_QP_INFO(81, 105, 1, 8),
+	SET_QP_INFO(82, 106, 1, 8),
+	SET_QP_INFO(83, 107, 1, 9),
+	SET_QP_INFO(84, 108, 1, 9),
+	SET_QP_INFO(85, 109, 1, 10),
+	SET_QP_INFO(86, 110, 1, 10),
+	SET_QP_INFO(87, 111, 1, 11),
+	SET_QP_INFO(88, 112, 1, 11),
+	SET_QP_INFO(25, 51, 1, 0),
+	SET_QP_INFO(26, 52, 1, 0),
+};
+#endif
+
+struct srio_liodn_id_table srio_liodn_tbl[] = {
+	SET_SRIO_LIODN_1(1, 307),
+	SET_SRIO_LIODN_1(2, 387),
+};
+int srio_liodn_tbl_sz = ARRAY_SIZE(srio_liodn_tbl);
+
+struct liodn_id_table liodn_tbl[] = {
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	SET_QMAN_LIODN(62),
+	SET_BMAN_LIODN(63),
+#endif
+
+	SET_SDHC_LIODN(1, 552),
+
+	SET_PME_LIODN(117),
+
+	SET_USB_LIODN(1, "fsl-usb2-mph", 553),
+	SET_USB_LIODN(2, "fsl-usb2-dr", 554),
+
+	SET_SATA_LIODN(1, 555),
+	SET_SATA_LIODN(2, 556),
+
+	SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 1, 148),
+	SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 2, 228),
+	SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 3, 308),
+	SET_PCI_LIODN(CONFIG_SYS_FSL_PCIE_COMPAT, 4, 388),
+
+	SET_DMA_LIODN(1, 147),
+	SET_DMA_LIODN(2, 227),
+
+	SET_GUTS_LIODN("fsl,rapidio-delta", 199, rio1liodnr, 0),
+	SET_GUTS_LIODN(NULL, 200, rio2liodnr, 0),
+	SET_GUTS_LIODN(NULL, 201, rio1maintliodnr, 0),
+	SET_GUTS_LIODN(NULL, 202, rio2maintliodnr, 0),
+
+#ifdef CONFIG_SYS_PMAN
+	SET_PMAN_LIODN(1, 513),
+	SET_PMAN_LIODN(2, 514),
+	SET_PMAN_LIODN(3, 515),
+#endif
+
+	/* SET_NEXUS_LIODN(557), -- not yet implemented */
+};
+int liodn_tbl_sz = ARRAY_SIZE(liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+struct liodn_id_table fman1_liodn_tbl[] = {
+	SET_FMAN_RX_1G_LIODN(1, 0, 88),
+	SET_FMAN_RX_1G_LIODN(1, 1, 89),
+	SET_FMAN_RX_1G_LIODN(1, 2, 90),
+	SET_FMAN_RX_1G_LIODN(1, 3, 91),
+	SET_FMAN_RX_1G_LIODN(1, 4, 92),
+	SET_FMAN_RX_1G_LIODN(1, 5, 93),
+	SET_FMAN_RX_10G_LIODN(1, 0, 94),
+	SET_FMAN_RX_10G_LIODN(1, 1, 95),
+};
+int fman1_liodn_tbl_sz = ARRAY_SIZE(fman1_liodn_tbl);
+#if (CONFIG_SYS_NUM_FMAN == 2)
+struct liodn_id_table fman2_liodn_tbl[] = {
+	SET_FMAN_RX_1G_LIODN(2, 0, 88),
+	SET_FMAN_RX_1G_LIODN(2, 1, 89),
+	SET_FMAN_RX_1G_LIODN(2, 2, 90),
+	SET_FMAN_RX_1G_LIODN(2, 3, 91),
+	SET_FMAN_RX_1G_LIODN(2, 4, 92),
+	SET_FMAN_RX_1G_LIODN(2, 5, 93),
+	SET_FMAN_RX_10G_LIODN(2, 0, 94),
+	SET_FMAN_RX_10G_LIODN(2, 1, 95),
+};
+int fman2_liodn_tbl_sz = ARRAY_SIZE(fman2_liodn_tbl);
+#endif
+#endif
+
+struct liodn_id_table sec_liodn_tbl[] = {
+	SET_SEC_JR_LIODN_ENTRY(0, 454, 458),
+	SET_SEC_JR_LIODN_ENTRY(1, 455, 459),
+	SET_SEC_JR_LIODN_ENTRY(2, 456, 460),
+	SET_SEC_JR_LIODN_ENTRY(3, 457, 461),
+	SET_SEC_RTIC_LIODN_ENTRY(a, 453),
+	SET_SEC_RTIC_LIODN_ENTRY(b, 549),
+	SET_SEC_RTIC_LIODN_ENTRY(c, 550),
+	SET_SEC_RTIC_LIODN_ENTRY(d, 551),
+	SET_SEC_DECO_LIODN_ENTRY(0, 541, 610),
+	SET_SEC_DECO_LIODN_ENTRY(1, 542, 611),
+	SET_SEC_DECO_LIODN_ENTRY(2, 543, 612),
+	SET_SEC_DECO_LIODN_ENTRY(3, 544, 613),
+	SET_SEC_DECO_LIODN_ENTRY(4, 545, 614),
+	SET_SEC_DECO_LIODN_ENTRY(5, 546, 615),
+	SET_SEC_DECO_LIODN_ENTRY(6, 547, 616),
+	SET_SEC_DECO_LIODN_ENTRY(7, 548, 617),
+};
+int sec_liodn_tbl_sz = ARRAY_SIZE(sec_liodn_tbl);
+
+#ifdef CONFIG_SYS_DPAA_RMAN
+struct liodn_id_table rman_liodn_tbl[] = {
+	/* Set RMan block 0-3 liodn offset */
+	SET_RMAN_LIODN(0, 678),
+	SET_RMAN_LIODN(1, 679),
+	SET_RMAN_LIODN(2, 680),
+	SET_RMAN_LIODN(3, 681),
+};
+int rman_liodn_tbl_sz = ARRAY_SIZE(rman_liodn_tbl);
+#endif
+
+struct liodn_id_table liodn_bases[] = {
+#ifdef CONFIG_SYS_DPAA_DCE
+	[FSL_HW_PORTAL_DCE]  = SET_LIODN_BASE_2(618, 694),
+#endif
+	[FSL_HW_PORTAL_SEC]  = SET_LIODN_BASE_2(462, 558),
+#ifdef CONFIG_SYS_DPAA_FMAN
+	[FSL_HW_PORTAL_FMAN1] = SET_LIODN_BASE_1(973),
+#if (CONFIG_SYS_NUM_FMAN == 2)
+	[FSL_HW_PORTAL_FMAN2] = SET_LIODN_BASE_1(1069),
+#endif
+#endif
+#ifdef CONFIG_SYS_DPAA_PME
+	[FSL_HW_PORTAL_PME]   = SET_LIODN_BASE_2(770, 846),
+#endif
+#ifdef CONFIG_SYS_DPAA_RMAN
+	[FSL_HW_PORTAL_RMAN] = SET_LIODN_BASE_1(922),
+#endif
+};
diff --git a/arch/powerpc/cpu/mpc85xx/t4240_serdes.c b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
new file mode 100644
index 0000000..102defa
--- /dev/null
+++ b/arch/powerpc/cpu/mpc85xx/t4240_serdes.c
@@ -0,0 +1,237 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_serdes.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+#include "fsl_corenet2_serdes.h"
+
+struct serdes_config {
+	u32 protocol;
+	u8 lanes[SRDS_MAX_LANES];
+};
+
+static struct serdes_config serdes1_cfg_tbl[] = {
+	/* SerDes 1 */
+	{1, {XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		XAUI_FM1_MAC9, XAUI_FM1_MAC9,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10,
+		XAUI_FM1_MAC10, XAUI_FM1_MAC10}},
+	{2, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}},
+	{4, {HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC9, HIGIG_FM1_MAC9,
+		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10,
+		HIGIG_FM1_MAC10, HIGIG_FM1_MAC10}},
+	{28, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}},
+	{36, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+		SGMII_FM1_DTSEC1, SGMII_FM1_DTSEC2,
+		SGMII_FM1_DTSEC3, SGMII_FM1_DTSEC4}},
+	{38, {NONE, NONE, QSGMII_FM1_B, NONE,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{40, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{46, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{48, {SGMII_FM1_DTSEC5, SGMII_FM1_DTSEC6,
+		SGMII_FM1_DTSEC10, SGMII_FM1_DTSEC9,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{}
+};
+static struct serdes_config serdes2_cfg_tbl[] = {
+	/* SerDes 2 */
+	{1, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		XAUI_FM2_MAC10, XAUI_FM2_MAC10,
+		XAUI_FM2_MAC10, XAUI_FM2_MAC10}},
+	{2, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC10, HIGIG_FM2_MAC10,
+		HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}},
+	{4, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC10, HIGIG_FM2_MAC10,
+		HIGIG_FM2_MAC10, HIGIG_FM2_MAC10}},
+	{7, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{13, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{14, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{16, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{22, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{23, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{25, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{26, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{28, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{36, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{38, {NONE, NONE, QSGMII_FM2_B, NONE,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{40, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{46, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{48, {SGMII_FM2_DTSEC5, SGMII_FM2_DTSEC6,
+		SGMII_FM2_DTSEC10, SGMII_FM2_DTSEC9,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{50, {XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		XAUI_FM2_MAC9, XAUI_FM2_MAC9,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{52, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{54, {HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		HIGIG_FM2_MAC9, HIGIG_FM2_MAC9,
+		NONE, NONE, QSGMII_FM1_A, NONE}},
+	{56, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		XFI_FM2_MAC10, XFI_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{57, {XFI_FM1_MAC9, XFI_FM1_MAC10,
+		XFI_FM2_MAC10, XFI_FM2_MAC9,
+		SGMII_FM2_DTSEC1, SGMII_FM2_DTSEC2,
+		SGMII_FM2_DTSEC3, SGMII_FM2_DTSEC4}},
+	{}
+};
+static struct serdes_config serdes3_cfg_tbl[] = {
+	/* SerDes 3 */
+	{2, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1, PCIE1}},
+	{4, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2}},
+	{6, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, SRIO1, SRIO1, SRIO1}},
+	{8, {PCIE1, PCIE1, PCIE1, PCIE1, SRIO1, NONE, NONE, NONE}},
+	{9, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
+	{10, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN}},
+	{12, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		PCIE2, PCIE2, PCIE2, PCIE2}},
+	{14, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		PCIE2, PCIE2, PCIE2, PCIE2}},
+	{16, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{17, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{19, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{20, {INTERLAKEN, INTERLAKEN, INTERLAKEN, INTERLAKEN,
+		SRIO1, SRIO1, SRIO1, SRIO1}},
+	{}
+};
+static struct serdes_config serdes4_cfg_tbl[] = {
+	/* SerDes 4 */
+	{2, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3, PCIE3}},
+	{4, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, PCIE4, PCIE4}},
+	{6, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
+	{8, {PCIE3, PCIE3, PCIE3, PCIE3, SRIO2, SRIO2, SRIO2, SRIO2}},
+	{10, {PCIE3, PCIE3, PCIE3, PCIE3, PCIE4, PCIE4, SATA1, SATA1}},
+	{12, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SATA1, SATA1}},
+	{14, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
+	{16, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, SRIO2, SRIO2}},
+	{18, {PCIE3, PCIE3, PCIE3, PCIE3, AURORA, AURORA, AURORA, AURORA}},
+	{}
+};
+static struct serdes_config *serdes_cfg_tbl[] = {
+	serdes1_cfg_tbl,
+	serdes2_cfg_tbl,
+	serdes3_cfg_tbl,
+	serdes4_cfg_tbl,
+};
+
+enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
+{
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == cfg)
+			return ptr->lanes[lane];
+		ptr++;
+	}
+	return 0;
+}
+
+int is_serdes_prtcl_valid(int serdes, u32 prtcl)
+{
+	int i;
+	struct serdes_config *ptr;
+
+	if (serdes >= ARRAY_SIZE(serdes_cfg_tbl))
+		return 0;
+
+	ptr = serdes_cfg_tbl[serdes];
+	while (ptr->protocol) {
+		if (ptr->protocol == prtcl)
+			break;
+		ptr++;
+	}
+
+	if (!ptr->protocol)
+		return 0;
+
+	for (i = 0; i < SRDS_MAX_LANES; i++) {
+		if (ptr->lanes[i] != NONE)
+			return 1;
+	}
+
+	return 0;
+}
diff --git a/arch/powerpc/cpu/mpc85xx/tlb.c b/arch/powerpc/cpu/mpc85xx/tlb.c
index 929f6a6..a548dec 100644
--- a/arch/powerpc/cpu/mpc85xx/tlb.c
+++ b/arch/powerpc/cpu/mpc85xx/tlb.c
@@ -249,7 +249,7 @@
 {
 	int i;
 	unsigned int tlb_size;
-	unsigned int wimge = 0;
+	unsigned int wimge = MAS2_M;
 	unsigned int ram_tlb_address = (unsigned int)CONFIG_SYS_DDR_SDRAM_BASE;
 	unsigned int max_cam;
 	u64 size, memsize = (u64)memsize_in_meg << 20;
diff --git a/arch/powerpc/cpu/mpc85xx/traps.c b/arch/powerpc/cpu/mpc85xx/traps.c
index 7800717..476ae93 100644
--- a/arch/powerpc/cpu/mpc85xx/traps.c
+++ b/arch/powerpc/cpu/mpc85xx/traps.c
@@ -82,8 +82,7 @@
  * Trap & Exception support
  */
 
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
@@ -103,7 +102,7 @@
 	printf("\n");
 }
 
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
@@ -131,24 +130,21 @@
 }
 
 
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
 	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
 }
 
-void
-CritcalInputException(struct pt_regs *regs)
+void CritcalInputException(struct pt_regs *regs)
 {
 	panic("Critical Input Exception");
 }
 
 int machinecheck_count = 0;
 int machinecheck_error = 0;
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
 	unsigned long fixup;
 	unsigned int mcsr, mcsrr0, mcsrr1, mcar;
@@ -220,8 +216,7 @@
 	}
 }
 
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -233,8 +228,7 @@
 	panic("Alignment Exception");
 }
 
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 	long esr_val;
 
@@ -257,8 +251,7 @@
 	panic("Program Check Exception");
 }
 
-void
-PITException(struct pt_regs *regs)
+void PITException(struct pt_regs *regs)
 {
 	/*
 	 * Reset PIT interrupt
@@ -271,9 +264,7 @@
 	timer_interrupt(NULL);
 }
 
-
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -285,8 +276,7 @@
 	_exception(0, regs);
 }
 
-void
-ExtIntException(struct pt_regs *regs)
+void ExtIntException(struct pt_regs *regs)
 {
 	volatile ccsr_pic_t *pic = (void *)(CONFIG_SYS_MPC8xxx_PIC_ADDR);
 
@@ -305,8 +295,7 @@
 	print_backtrace((unsigned long *)regs->gpr[1]);
 }
 
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
 {
 	printf("Debugger trap at @ %lx\n", regs->nip );
 	show_regs(regs);
@@ -318,8 +307,7 @@
 /* Probe an address by reading.	 If not present, return -1, otherwise
  * return 0.
  */
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
 {
 	return 0;
 }
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
index 8ba9399..f7c4a22 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand.lds
@@ -70,9 +70,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
index 668158f..46dbaed 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot-nand_spl.lds
@@ -53,6 +53,10 @@
 	}
 	_edata  =  .;
 
+	.u_boot_list : {
+		#include <u-boot.lst>
+	}
+
 	. = ALIGN(8);
 	__init_begin = .;
 	__init_end = .;
diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds
index efe34b7..4a40a1f 100644
--- a/arch/powerpc/cpu/mpc85xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds
@@ -77,9 +77,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/arch/powerpc/cpu/mpc86xx/fdt.c b/arch/powerpc/cpu/mpc86xx/fdt.c
index 61f5110..2f955fe 100644
--- a/arch/powerpc/cpu/mpc86xx/fdt.c
+++ b/arch/powerpc/cpu/mpc86xx/fdt.c
@@ -20,7 +20,7 @@
 {
 #ifdef CONFIG_MP
 	int off;
-	u32 bootpg = determine_mp_bootpg();
+	u32 bootpg = determine_mp_bootpg(NULL);
 #endif
 
 	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4,
diff --git a/arch/powerpc/cpu/mpc86xx/mp.c b/arch/powerpc/cpu/mpc86xx/mp.c
index 30c99eb..de705f0 100644
--- a/arch/powerpc/cpu/mpc86xx/mp.c
+++ b/arch/powerpc/cpu/mpc86xx/mp.c
@@ -90,8 +90,11 @@
 	return 1;
 }
 
-u32 determine_mp_bootpg(void)
+u32 determine_mp_bootpg(unsigned int *pagesize)
 {
+	if (pagesize)
+		*pagesize = 4096;
+
 	/* if we have 4G or more of memory, put the boot page at 4Gb-1M */
 	if ((u64)gd->ram_size > 0xfffff000)
 		return (0xfff00000);
@@ -101,7 +104,7 @@
 
 void cpu_mp_lmb_reserve(struct lmb *lmb)
 {
-	u32 bootpg = determine_mp_bootpg();
+	u32 bootpg = determine_mp_bootpg(NULL);
 
 	/* tell u-boot we stole a page */
 	lmb_reserve(lmb, bootpg, 4096);
@@ -115,7 +118,7 @@
 {
 	extern ulong __secondary_start_page;
 	ulong fixup = (ulong)&__secondary_start_page;
-	u32 bootpg = determine_mp_bootpg();
+	u32 bootpg = determine_mp_bootpg(NULL);
 	u32 bootpg_va;
 
 	if (bootpg >= CONFIG_SYS_MAX_DDR_BAT_SIZE) {
diff --git a/arch/powerpc/cpu/mpc86xx/traps.c b/arch/powerpc/cpu/mpc86xx/traps.c
index 406403e..50069d5 100644
--- a/arch/powerpc/cpu/mpc86xx/traps.c
+++ b/arch/powerpc/cpu/mpc86xx/traps.c
@@ -52,8 +52,7 @@
  * Trap & Exception support
  */
 
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
@@ -74,8 +73,7 @@
 	printf("\n");
 }
 
-void
-show_regs(struct pt_regs *regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
@@ -103,16 +101,14 @@
 }
 
 
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
 	panic("Exception in kernel pc %lx signal %d", regs->nip, signr);
 }
 
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
 	unsigned long fixup;
 
@@ -158,8 +154,7 @@
 	panic("machine check");
 }
 
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler) (regs))
@@ -170,8 +165,7 @@
 	panic("Alignment Exception");
 }
 
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 	unsigned char *p = regs ? (unsigned char *)(regs->nip) : NULL;
 	int i, j;
@@ -196,8 +190,7 @@
 	panic("Program Check Exception");
 }
 
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler) (regs))
@@ -208,8 +201,7 @@
 	panic("Software Emulation Exception");
 }
 
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler) (regs))
@@ -226,8 +218,7 @@
  * If not present, return -1,
  * otherwise return 0.
  */
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
 {
 	return 0;
 }
diff --git a/arch/powerpc/cpu/mpc86xx/u-boot.lds b/arch/powerpc/cpu/mpc86xx/u-boot.lds
index 121e529..8bfadf2 100644
--- a/arch/powerpc/cpu/mpc86xx/u-boot.lds
+++ b/arch/powerpc/cpu/mpc86xx/u-boot.lds
@@ -64,9 +64,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/arch/powerpc/cpu/mpc8xx/fec.c b/arch/powerpc/cpu/mpc8xx/fec.c
index b348a98..d7c9090 100644
--- a/arch/powerpc/cpu/mpc8xx/fec.c
+++ b/arch/powerpc/cpu/mpc8xx/fec.c
@@ -460,7 +460,7 @@
 
 #endif /* !CONFIG_RMII */
 
-#elif !defined(CONFIG_ICU862) && !defined(CONFIG_IAD210)
+#elif !defined(CONFIG_ICU862)
 		/*
 		 * Configure all of port D for MII.
 		 */
diff --git a/arch/powerpc/cpu/mpc8xx/scc.c b/arch/powerpc/cpu/mpc8xx/scc.c
index 2c93e24..2ef77b4 100644
--- a/arch/powerpc/cpu/mpc8xx/scc.c
+++ b/arch/powerpc/cpu/mpc8xx/scc.c
@@ -473,20 +473,6 @@
 	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
 #endif /* MPC860ADS */
 
-#if defined(CONFIG_AMX860)
-	/*
-	 * Port B is used to control the PHY,MC68160.
-	 */
-	immr->im_cpm.cp_pbdir |=
-		(PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
-
-	immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
-	immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
-
-	immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
-	immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
-#endif /* AMX860 */
-
 #ifdef CONFIG_RPXCLASSIC
 	*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
 	*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
@@ -542,7 +528,7 @@
 	 */
 #if defined (CONFIG_FADS)
 	udelay (10000);		/* wait 10 ms */
-#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+#elif defined(CONFIG_RPXCLASSIC)
 	udelay (100000);	/* wait 100 ms */
 #endif
 
diff --git a/arch/powerpc/cpu/mpc8xx/traps.c b/arch/powerpc/cpu/mpc8xx/traps.c
index 343dced..f0ab78d 100644
--- a/arch/powerpc/cpu/mpc8xx/traps.c
+++ b/arch/powerpc/cpu/mpc8xx/traps.c
@@ -52,8 +52,7 @@
  * Trap & Exception support
  */
 
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
@@ -73,7 +72,7 @@
 	printf("\n");
 }
 
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
@@ -101,16 +100,14 @@
 }
 
 
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
 	panic("Exception in kernel pc %lx signal %d",regs->nip,signr);
 }
 
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
 	unsigned long fixup;
 
@@ -153,8 +150,7 @@
 	panic("machine check");
 }
 
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -165,8 +161,7 @@
 	panic("Alignment Exception");
 }
 
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -177,8 +172,7 @@
 	panic("Program Check Exception");
 }
 
-void
-SoftEmuException(struct pt_regs *regs)
+void SoftEmuException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -190,8 +184,7 @@
 }
 
 
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -202,8 +195,7 @@
 	_exception(0, regs);
 }
 
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
 {
   printf("Debugger trap at @ %lx\n", regs->nip );
   show_regs(regs);
@@ -215,8 +207,7 @@
 /* Probe an address by reading.  If not present, return -1, otherwise
  * return 0.
  */
-int
-addr_probe(uint *addr)
+int addr_probe(uint *addr)
 {
 #if 0
 	int	retval;
diff --git a/arch/powerpc/cpu/mpc8xxx/cpu.c b/arch/powerpc/cpu/mpc8xxx/cpu.c
index 78a8f92..e8613be 100644
--- a/arch/powerpc/cpu/mpc8xxx/cpu.c
+++ b/arch/powerpc/cpu/mpc8xxx/cpu.c
@@ -34,7 +34,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-struct cpu_type cpu_type_list [] = {
+static struct cpu_type cpu_type_list[] = {
 #if defined(CONFIG_MPC85xx)
 	CPU_TYPE_ENTRY(8533, 8533, 1),
 	CPU_TYPE_ENTRY(8535, 8535, 1),
@@ -73,6 +73,17 @@
 	CPU_TYPE_ENTRY(P4080, P4080, 8),
 	CPU_TYPE_ENTRY(P5010, P5010, 1),
 	CPU_TYPE_ENTRY(P5020, P5020, 2),
+	CPU_TYPE_ENTRY(P5021, P5021, 2),
+	CPU_TYPE_ENTRY(P5040, P5040, 4),
+	CPU_TYPE_ENTRY(T4240, T4240, 0),
+	CPU_TYPE_ENTRY(T4120, T4120, 0),
+	CPU_TYPE_ENTRY(B4860, B4860, 0),
+	CPU_TYPE_ENTRY(G4860, G4860, 0),
+	CPU_TYPE_ENTRY(G4060, G4060, 0),
+	CPU_TYPE_ENTRY(B4440, B4440, 0),
+	CPU_TYPE_ENTRY(G4440, G4440, 0),
+	CPU_TYPE_ENTRY(B4420, B4420, 0),
+	CPU_TYPE_ENTRY(B4220, B4220, 0),
 	CPU_TYPE_ENTRY(BSC9130, 9130, 1),
 	CPU_TYPE_ENTRY(BSC9131, 9131, 1),
 #elif defined(CONFIG_MPC86xx)
@@ -114,7 +125,7 @@
 #define compute_ppc_cpumask()	1
 #endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
-struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0);
+static struct cpu_type cpu_type_unknown = CPU_TYPE_ENTRY(Unknown, Unknown, 0);
 
 struct cpu_type *identify_cpu(u32 ver)
 {
@@ -132,7 +143,7 @@
 /*
  * Return a 32-bit mask indicating which cores are present on this SOC.
  */
-u32 cpu_mask()
+u32 cpu_mask(void)
 {
 	ccsr_pic_t __iomem *pic = (void *)CONFIG_SYS_MPC8xxx_PIC_ADDR;
 	struct cpu_type *cpu = gd->cpu;
@@ -151,7 +162,8 @@
 /*
  * Return the number of cores on this SOC.
  */
-int cpu_numcores() {
+int cpu_numcores(void)
+{
 	struct cpu_type *cpu = gd->cpu;
 
 	/*
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
index 2592873..088cc0e 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/ctrl_regs.c
@@ -28,7 +28,7 @@
 	#error "Undefined _DDR_ADDR"
 #endif
 
-u32 fsl_ddr_get_version(void)
+static u32 fsl_ddr_get_version(void)
 {
 	ccsr_ddr_t *ddr;
 	u32 ver_major_minor_errata;
@@ -229,6 +229,26 @@
 /* -3E = 667 CL5, -25 = CL6 800, -25E = CL5 800 */
 
 #if !defined(CONFIG_FSL_DDR1)
+static inline int avoid_odt_overlap(const dimm_params_t *dimm_params)
+{
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 1
+	if (dimm_params[0].n_ranks == 4)
+		return 1;
+#endif
+
+#if CONFIG_DIMM_SLOTS_PER_CTLR == 2
+	if ((dimm_params[0].n_ranks == 2) &&
+		(dimm_params[1].n_ranks == 2))
+		return 1;
+
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+	if (dimm_params[0].n_ranks == 4)
+		return 1;
+#endif
+#endif
+	return 0;
+}
+
 /*
  * DDR SDRAM Timing Configuration 0 (TIMING_CFG_0)
  *
@@ -236,7 +256,8 @@
  * dreams up non-zero default values to be backwards compatible.
  */
 static void set_timing_cfg_0(fsl_ddr_cfg_regs_t *ddr,
-				const memctl_options_t *popts)
+				const memctl_options_t *popts,
+				const dimm_params_t *dimm_params)
 {
 	unsigned char trwt_mclk = 0;   /* Read-to-write turnaround */
 	unsigned char twrt_mclk = 0;   /* Write-to-read turnaround */
@@ -266,7 +287,18 @@
 	unsigned int data_rate = get_ddr_freq(0);
 	tmrd_mclk = 4;
 	/* set the turnaround time */
-	trwt_mclk = 1;
+
+	/*
+	 * for single quad-rank DIMM and two dual-rank DIMMs
+	 * to avoid ODT overlap
+	 */
+	if (avoid_odt_overlap(dimm_params)) {
+		twwt_mclk = 2;
+		trrt_mclk = 1;
+	}
+	/* for faster clock, need more time for data setup */
+	trwt_mclk = (data_rate/1000000 > 1800) ? 2 : 1;
+
 	if ((data_rate/1000000 > 1150) || (popts->memctl_interleaving))
 		twrt_mclk = 1;
 
@@ -451,8 +483,8 @@
 		| ((caslat_ctrl & 0xF) << 16)
 		| ((refrec_ctrl & 0xF) << 12)
 		| ((wrrec_mclk & 0x0F) << 8)
-		| ((acttoact_mclk & 0x07) << 4)
-		| ((wrtord_mclk & 0x07) << 0)
+		| ((acttoact_mclk & 0x0F) << 4)
+		| ((wrtord_mclk & 0x0F) << 0)
 		);
 	debug("FSLDDR: timing_cfg_1 = 0x%08x\n", ddr->timing_cfg_1);
 }
@@ -659,6 +691,7 @@
 	unsigned int dqs_cfg;		/* DQS configuration */
 	unsigned int odt_cfg = 0;	/* ODT configuration */
 	unsigned int num_pr;		/* Number of posted refreshes */
+	unsigned int slow = 0;		/* DDR will be run less than 1250 */
 	unsigned int obc_cfg;		/* On-The-Fly Burst Chop Cfg */
 	unsigned int ap_en;		/* Address Parity Enable */
 	unsigned int d_init;		/* DRAM data initialization */
@@ -692,6 +725,10 @@
 	obc_cfg = 0;
 #endif
 
+#if (CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7)
+	slow = get_ddr_freq(0) < 1249000000;
+#endif
+
 	if (popts->registered_dimm_en) {
 		rcw_en = 1;
 		ap_en = popts->ap_en;
@@ -720,6 +757,7 @@
 		| ((dqs_cfg & 0x3) << 26)
 		| ((odt_cfg & 0x3) << 21)
 		| ((num_pr & 0xf) << 12)
+		| ((slow & 1) << 11)
 		| (qd_en << 9)
 		| (unq_mrs_en << 8)
 		| ((obc_cfg & 0x1) << 6)
@@ -1347,6 +1385,11 @@
 			       | ((wrlvl_start & 0x1F) << 0)
 			       );
 	debug("FSLDDR: wrlvl_cntl = 0x%08x\n", ddr->ddr_wrlvl_cntl);
+	ddr->ddr_wrlvl_cntl_2 = popts->wrlvl_ctl_2;
+	debug("FSLDDR: wrlvl_cntl_2 = 0x%08x\n", ddr->ddr_wrlvl_cntl_2);
+	ddr->ddr_wrlvl_cntl_3 = popts->wrlvl_ctl_3;
+	debug("FSLDDR: wrlvl_cntl_3 = 0x%08x\n", ddr->ddr_wrlvl_cntl_3);
+
 }
 
 /* DDR Self Refresh Counter (DDR_SR_CNTR) */
@@ -1370,6 +1413,12 @@
 	debug("FSLDDR: ddr_cdr1 = 0x%08x\n", ddr->ddr_cdr1);
 }
 
+static void set_ddr_cdr2(fsl_ddr_cfg_regs_t *ddr, const memctl_options_t *popts)
+{
+	ddr->ddr_cdr2 = popts->ddr_cdr2;
+	debug("FSLDDR: ddr_cdr2 = 0x%08x\n", ddr->ddr_cdr2);
+}
+
 unsigned int
 check_fsl_memctl_config_regs(const fsl_ddr_cfg_regs_t *ddr)
 {
@@ -1466,7 +1515,7 @@
 				break;
 			}
 			sa = common_dimm->base_address;
-			ea = common_dimm->total_mem - 1;
+			ea = sa + common_dimm->total_mem - 1;
 		} else if (!popts->memctl_interleaving) {
 			/*
 			 * If memory interleaving between controllers is NOT
@@ -1480,7 +1529,7 @@
 			switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
 			case FSL_DDR_CS0_CS1_CS2_CS3:
 				sa = common_dimm->base_address;
-				ea = common_dimm->total_mem - 1;
+				ea = sa + common_dimm->total_mem - 1;
 				break;
 			case FSL_DDR_CS0_CS1_AND_CS2_CS3:
 				if ((i >= 2) && (dimm_number == 0)) {
@@ -1537,17 +1586,19 @@
 		sa >>= 24;
 		ea >>= 24;
 
-		ddr->cs[i].bnds = (0
-			| ((sa & 0xFFF) << 16)	/* starting address MSB */
-			| ((ea & 0xFFF) << 0)	/* ending address MSB */
-			);
+		if (cs_en) {
+			ddr->cs[i].bnds = (0
+				| ((sa & 0xFFF) << 16)/* starting address MSB */
+				| ((ea & 0xFFF) << 0)	/* ending address MSB */
+				);
+		} else {
+			debug("FSLDDR: setting bnds to 0 for inactive CS\n");
+			ddr->cs[i].bnds = 0;
+		}
 
 		debug("FSLDDR: cs[%d]_bnds = 0x%08x\n", i, ddr->cs[i].bnds);
-		if (cs_en) {
-			set_csn_config(dimm_number, i, ddr, popts, dimm_params);
-			set_csn_config_2(i, ddr);
-		} else
-			debug("CS%d is disabled.\n", i);
+		set_csn_config(dimm_number, i, ddr, popts, dimm_params);
+		set_csn_config_2(i, ddr);
 	}
 
 	/*
@@ -1560,7 +1611,7 @@
 	set_ddr_eor(ddr, popts);
 
 #if !defined(CONFIG_FSL_DDR1)
-	set_timing_cfg_0(ddr, popts);
+	set_timing_cfg_0(ddr, popts, dimm_params);
 #endif
 
 	set_timing_cfg_3(ddr, popts, common_dimm, cas_latency);
@@ -1569,6 +1620,7 @@
 				cas_latency, additive_latency);
 
 	set_ddr_cdr1(ddr, popts);
+	set_ddr_cdr2(ddr, popts);
 	set_ddr_sdram_cfg(ddr, popts, common_dimm);
 	ip_rev = fsl_ddr_get_version();
 	if (ip_rev > 0x40400)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
index f59d105..cb71f94 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/interactive.c
@@ -452,6 +452,8 @@
 		CTRL_OPTIONS(rcw_override),
 		CTRL_OPTIONS(rcw_1),
 		CTRL_OPTIONS(rcw_2),
+		CTRL_OPTIONS(ddr_cdr1),
+		CTRL_OPTIONS(ddr_cdr2),
 		CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
 		CTRL_OPTIONS(tFAW_window_four_activates_ps),
 		CTRL_OPTIONS(trwt_override),
@@ -518,6 +520,8 @@
 		CFG_REGS(timing_cfg_5),
 		CFG_REGS(ddr_zq_cntl),
 		CFG_REGS(ddr_wrlvl_cntl),
+		CFG_REGS(ddr_wrlvl_cntl_2),
+		CFG_REGS(ddr_wrlvl_cntl_3),
 		CFG_REGS(ddr_sr_cntr),
 		CFG_REGS(ddr_sdram_rcw_1),
 		CFG_REGS(ddr_sdram_rcw_2),
@@ -525,6 +529,7 @@
 		CFG_REGS(ddr_cdr2),
 		CFG_REGS(err_disable),
 		CFG_REGS(err_int_en),
+		CFG_REGS(ddr_eor),
 	};
 	static const unsigned int n_opts = ARRAY_SIZE(options);
 
@@ -584,6 +589,8 @@
 		CFG_REGS(timing_cfg_5),
 		CFG_REGS(ddr_zq_cntl),
 		CFG_REGS(ddr_wrlvl_cntl),
+		CFG_REGS(ddr_wrlvl_cntl_2),
+		CFG_REGS(ddr_wrlvl_cntl_3),
 		CFG_REGS(ddr_sr_cntr),
 		CFG_REGS(ddr_sdram_rcw_1),
 		CFG_REGS(ddr_sdram_rcw_2),
@@ -593,7 +600,7 @@
 		CFG_REGS(err_int_en),
 		CFG_REGS(ddr_sdram_rcw_2),
 		CFG_REGS(ddr_sdram_rcw_2),
-
+		CFG_REGS(ddr_eor),
 	};
 	static const unsigned int n_opts = ARRAY_SIZE(options);
 
@@ -689,6 +696,8 @@
 		CTRL_OPTIONS(rcw_override),
 		CTRL_OPTIONS(rcw_1),
 		CTRL_OPTIONS(rcw_2),
+		CTRL_OPTIONS_HEX(ddr_cdr1),
+		CTRL_OPTIONS_HEX(ddr_cdr2),
 		CTRL_OPTIONS(tCKE_clock_pulse_width_ps),
 		CTRL_OPTIONS(tFAW_window_four_activates_ps),
 		CTRL_OPTIONS(trwt_override),
@@ -1597,6 +1606,7 @@
 			 * doesn't return
 			 */
 			do_reset(NULL, 0, 0, NULL);
+			printf("Reset didn't work\n");
 		}
 
 		if (strcmp(argv[0], "recompute") == 0) {
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
index 03a784c..9adde31 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/lc_common_dimm_params.c
@@ -11,7 +11,8 @@
 
 #include "ddr.h"
 
-unsigned int
+#if defined(CONFIG_FSL_DDR3)
+static unsigned int
 compute_cas_latency_ddr3(const dimm_params_t *dimm_params,
 			 common_timing_params_t *outpdimm,
 			 unsigned int number_of_dimms)
@@ -65,6 +66,7 @@
 
 	return 0;
 }
+#endif
 
 /*
  * compute_lowest_common_dimm_parameters()
@@ -76,7 +78,7 @@
 unsigned int
 compute_lowest_common_dimm_parameters(const dimm_params_t *dimm_params,
 				      common_timing_params_t *outpdimm,
-				      unsigned int number_of_dimms)
+				      const unsigned int number_of_dimms)
 {
 	unsigned int i, j;
 
@@ -126,13 +128,20 @@
 			temp1++;
 			continue;
 		}
+
+		/*
+		 * check if quad-rank DIMM is plugged if
+		 * CONFIG_CHIP_SELECT_QUAD_CAPABLE is not defined
+		 * Only the board with proper design is capable
+		 */
+#ifndef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
 		if (dimm_params[i].n_ranks == 4 && \
 		  CONFIG_CHIP_SELECTS_PER_CTRL/CONFIG_DIMM_SLOTS_PER_CTLR < 4) {
 			printf("Found Quad-rank DIMM, not able to support.");
 			temp1++;
 			continue;
 		}
-
+#endif
 		/*
 		 * Find minimum tCKmax_ps to find fastest slow speed,
 		 * i.e., this is the slowest the whole system can go.
@@ -236,11 +245,14 @@
 	if (outpdimm->all_DIMMs_registered)
 		for (j = 0; j < 16; j++) {
 			outpdimm->rcw[j] = dimm_params[0].rcw[j];
-			for (i = 1; i < number_of_dimms; i++)
+			for (i = 1; i < number_of_dimms; i++) {
+				if (!dimm_params[i].n_ranks)
+					continue;
 				if (dimm_params[i].rcw[j] != dimm_params[0].rcw[j]) {
 					temp1 = 1;
 					break;
 				}
+			}
 		}
 
 	if (temp1 != 0)
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/main.c b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
index b47268c..d6b73c7 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/main.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/main.c
@@ -77,7 +77,19 @@
 				sizeof(generic_spd_eeprom_t));
 
 	if (ret) {
-		printf("DDR: failed to read SPD from address %u\n", i2c_address);
+		if (i2c_address ==
+#ifdef SPD_EEPROM_ADDRESS
+				SPD_EEPROM_ADDRESS
+#elif defined(SPD_EEPROM_ADDRESS1)
+				SPD_EEPROM_ADDRESS1
+#endif
+				) {
+			printf("DDR: failed to read SPD from address %u\n",
+				i2c_address);
+		} else {
+			debug("DDR: failed to read SPD from address %u\n",
+				i2c_address);
+		}
 		memset(spd, 0, sizeof(generic_spd_eeprom_t));
 	}
 }
@@ -526,6 +538,17 @@
 #endif
 		total_memory = fsl_ddr_compute(&info, STEP_GET_SPD, 0);
 
+	/* setup 3-way interleaving before enabling DDRC */
+	switch (info.memctl_opts[0].memctl_interleaving_mode) {
+	case FSL_DDR_3WAY_1KB_INTERLEAVING:
+	case FSL_DDR_3WAY_4KB_INTERLEAVING:
+	case FSL_DDR_3WAY_8KB_INTERLEAVING:
+		fsl_ddr_set_intl3r(info.memctl_opts[0].memctl_interleaving_mode);
+		break;
+	default:
+		break;
+	}
+
 	/* Program configuration registers. */
 	for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
 		debug("Programming controller %u\n", i);
@@ -561,7 +584,6 @@
 			case FSL_DDR_3WAY_8KB_INTERLEAVING:
 				law_memctl = LAW_TRGT_IF_DDR_INTLV_123;
 				if (i == 0) {
-					fsl_ddr_set_intl3r(info.memctl_opts[i].memctl_interleaving_mode);
 					fsl_ddr_set_lawbar(&info.common_timing_params[i],
 						law_memctl, i);
 				}
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/options.c b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
index 13e4825..2f13b8f 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/options.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/options.c
@@ -474,6 +474,34 @@
 	}
 };
 #endif
+
+/*
+ * Automatically seleect bank interleaving mode based on DIMMs
+ * in this order: cs0_cs1_cs2_cs3, cs0_cs1, null.
+ * This function only deal with one or two slots per controller.
+ */
+static inline unsigned int auto_bank_intlv(dimm_params_t *pdimm)
+{
+#if (CONFIG_DIMM_SLOTS_PER_CTLR == 1)
+	if (pdimm[0].n_ranks == 4)
+		return FSL_DDR_CS0_CS1_CS2_CS3;
+	else if (pdimm[0].n_ranks == 2)
+		return FSL_DDR_CS0_CS1;
+#elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+	if (pdimm[0].n_ranks == 4)
+		return FSL_DDR_CS0_CS1_CS2_CS3;
+#endif
+	if (pdimm[0].n_ranks == 2) {
+		if (pdimm[1].n_ranks == 2)
+			return FSL_DDR_CS0_CS1_CS2_CS3;
+		else
+			return FSL_DDR_CS0_CS1;
+	}
+#endif
+	return 0;
+}
+
 unsigned int populate_memctl_options(int all_DIMMs_registered,
 			memctl_options_t *popts,
 			dimm_params_t *pdimm,
@@ -510,6 +538,14 @@
 		}
 	} else if (CONFIG_DIMM_SLOTS_PER_CTLR == 2) {
 		switch (pdimm[0].n_ranks) {
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+		case 4:
+			pdodt = single_Q;
+			if (pdimm[1].n_ranks)
+				printf("Error: Quad- and Dual-rank DIMMs "
+					"cannot be used together\n");
+			break;
+#endif
 		case 2:
 			switch (pdimm[1].n_ranks) {
 			case 2:
@@ -900,6 +936,9 @@
 		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
 						 "cs0_cs1_cs2_cs3", buf))
 			popts->ba_intlv_ctl = FSL_DDR_CS0_CS1_CS2_CS3;
+		else if (hwconfig_subarg_cmp_f("fsl_ddr", "bank_intlv",
+						"auto", buf))
+			popts->ba_intlv_ctl = auto_bank_intlv(pdimm);
 		else
 			printf("hwconfig has unrecognized parameter for bank_intlv.\n");
 		switch (popts->ba_intlv_ctl & FSL_DDR_CS0_CS1_CS2_CS3) {
@@ -912,6 +951,10 @@
 					"interleaving disabled!\n", ctrl_num);
 			}
 #elif (CONFIG_DIMM_SLOTS_PER_CTLR == 2)
+#ifdef CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+			if (pdimm[0].n_ranks == 4)
+				break;
+#endif
 			if ((pdimm[0].n_ranks < 2) && (pdimm[1].n_ranks < 2)) {
 				popts->ba_intlv_ctl = 0;
 				printf("Not enough bank(chip-select) for "
@@ -1063,7 +1106,7 @@
 			break;
 		}
 		debug("%d of %d controllers are interleaving.\n", j, k);
-		if (j != k) {
+		if (j && (j != k)) {
 			for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
 				pinfo->memctl_opts[i].memctl_interleaving = 0;
 			printf("Not all controllers have compatible "
diff --git a/arch/powerpc/cpu/mpc8xxx/ddr/util.c b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
index 664ad09..940ffff 100644
--- a/arch/powerpc/cpu/mpc8xxx/ddr/util.c
+++ b/arch/powerpc/cpu/mpc8xxx/ddr/util.c
@@ -121,6 +121,16 @@
 #endif
 }
 
+u32 fsl_ddr_get_intl3r(void)
+{
+	u32 val = 0;
+#ifdef CONFIG_E6500
+	u32 *mcintl3r = (void *) (CONFIG_SYS_IMMR + 0x18004);
+	val = *mcintl3r;
+#endif
+	return val;
+}
+
 void board_add_ram_info(int use_default)
 {
 #if defined(CONFIG_MPC83xx)
@@ -140,6 +150,18 @@
 	uint32_t sdram_cfg = in_be32(&ddr->sdram_cfg);
 	int cas_lat;
 
+#if CONFIG_NUM_DDR_CONTROLLERS >= 2
+	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+		ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR2_ADDR;
+		sdram_cfg = in_be32(&ddr->sdram_cfg);
+	}
+#endif
+#if CONFIG_NUM_DDR_CONTROLLERS >= 3
+	if (!(sdram_cfg & SDRAM_CFG_MEM_EN)) {
+		ddr = (void __iomem *)CONFIG_SYS_MPC85xx_DDR3_ADDR;
+		sdram_cfg = in_be32(&ddr->sdram_cfg);
+	}
+#endif
 	puts(" (DDR");
 	switch ((sdram_cfg & SDRAM_CFG_SDRAM_TYPE_MASK) >>
 		SDRAM_CFG_SDRAM_TYPE_SHIFT) {
diff --git a/arch/powerpc/cpu/mpc8xxx/fdt.c b/arch/powerpc/cpu/mpc8xxx/fdt.c
index 32ab050..68db8e2 100644
--- a/arch/powerpc/cpu/mpc8xxx/fdt.c
+++ b/arch/powerpc/cpu/mpc8xxx/fdt.c
@@ -139,6 +139,8 @@
 	const char *phys[] = { "ulpi", "utmi" };
 	const char *mode = NULL;
 	const char *phy_type = NULL;
+	const char *dr_mode_type = NULL;
+	const char *dr_phy_type = NULL;
 	char usb1_defined = 0;
 	int usb_mode_off = -1;
 	int usb_phy_off = -1;
@@ -156,6 +158,7 @@
 					break;
 				}
 			}
+
 			for (j = 0; j < ARRAY_SIZE(phys); j++) {
 				if (hwconfig_subarg_cmp(str, "phy_type",
 						phys[j])) {
@@ -163,31 +166,46 @@
 					break;
 				}
 			}
-			if (mode_idx >= 0) {
-				usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
-					modes[mode_idx], NULL, usb_mode_off);
-				if (usb_mode_off < 0)
-					return;
-			}
-			if (phy_idx >= 0) {
-				usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
-					NULL, phys[phy_idx], usb_phy_off);
-				if (usb_phy_off < 0)
-					return;
-			}
+
+			dr_mode_type = modes[mode_idx];
+			dr_phy_type = phys[phy_idx];
+
+			/* use usb_dr_mode and usb_phy_type if
+			   usb1_defined = 0; these variables are to
+			   be deprecated */
 			if (!strcmp(str, "usb1"))
 				usb1_defined = 1;
-			if (mode_idx < 0 && phy_idx < 0)
+
+			if (mode_idx < 0 && phy_idx < 0) {
 				printf("WARNING: invalid phy or mode\n");
+				return;
+			}
 		}
+
+		usb_mode_off = fdt_fixup_usb_mode_phy_type(blob,
+			dr_mode_type, NULL, usb_mode_off);
+
+		if (usb_mode_off < 0)
+			return;
+
+		usb_phy_off = fdt_fixup_usb_mode_phy_type(blob,
+			NULL, dr_phy_type, usb_phy_off);
+
+		if (usb_phy_off < 0)
+			return;
 	}
+
 	if (!usb1_defined) {
 		int usb_off = -1;
 		mode = getenv("usb_dr_mode");
 		phy_type = getenv("usb_phy_type");
-		if (!mode && !phy_type)
-			return;
-		fdt_fixup_usb_mode_phy_type(blob, mode, phy_type, usb_off);
+		if (mode || phy_type) {
+			printf("WARNING: usb_dr_mode and usb_phy_type "
+				"are to be deprecated soon. Use "
+				"hwconfig to set these values instead!!\n");
+			fdt_fixup_usb_mode_phy_type(blob, mode,
+				phy_type, usb_off);
+		}
 	}
 }
 #endif /* defined(CONFIG_HAS_FSL_DR_USB) || defined(CONFIG_HAS_FSL_MPH_USB) */
diff --git a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
index 023ac9a..c1fe579 100644
--- a/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
+++ b/arch/powerpc/cpu/mpc8xxx/fsl_lbc.c
@@ -11,7 +11,7 @@
 
 #ifdef CONFIG_MPC85xx
 /* Boards should provide their own version of this if they use lbc sdram */
-void __lbc_sdram_init(void)
+static void __lbc_sdram_init(void)
 {
 	/* Do nothing */
 }
diff --git a/arch/powerpc/cpu/mpc8xxx/srio.c b/arch/powerpc/cpu/mpc8xxx/srio.c
index 0cb65b3..6e6f7dc 100644
--- a/arch/powerpc/cpu/mpc8xxx/srio.c
+++ b/arch/powerpc/cpu/mpc8xxx/srio.c
@@ -22,7 +22,9 @@
 #include <asm/fsl_law.h>
 #include <asm/fsl_serdes.h>
 #include <asm/fsl_srio.h>
+#include <asm/errno.h>
 
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
 #define SRIO_PORT_ACCEPT_ALL 0x10000001
 #define SRIO_IB_ATMU_AR 0x80f55000
 #define SRIO_OB_ATMU_AR_MAINT 0x80077000
@@ -31,10 +33,16 @@
 #define SRIO_MAINT_WIN_SIZE 0x1000000 /* 16M */
 #define SRIO_RW_WIN_SIZE 0x100000 /* 1M */
 #define SRIO_LCSBA1CSR 0x60000000
+#endif
 
 #if defined(CONFIG_FSL_CORENET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+	#define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR3_SRIO1
+	#define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR3_SRIO2
+#else
 	#define _DEVDISR_SRIO1 FSL_CORENET_DEVDISR_SRIO1
 	#define _DEVDISR_SRIO2 FSL_CORENET_DEVDISR_SRIO2
+#endif
 	#define _DEVDISR_RMU   FSL_CORENET_DEVDISR_RMU
 	#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
 #elif defined(CONFIG_MPC85xx)
@@ -52,16 +60,206 @@
 #error "No defines for DEVDISR_SRIO"
 #endif
 
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+/*
+ * Erratum A-004034
+ * Affects: SRIO
+ * Description: During port initialization, the SRIO port performs
+ * lane synchronization (detecting valid symbols on a lane) and
+ * lane alignment (coordinating multiple lanes to receive valid data
+ * across lanes). Internal errors in lane synchronization and lane
+ * alignment may cause failure to achieve link initialization at
+ * the configured port width.
+ * An SRIO port configured as a 4x port may see one of these scenarios:
+ * 1. One or more lanes fails to achieve lane synchronization. Depending
+ * on which lanes fail, this may result in downtraining from 4x to 1x
+ * on lane 0, 4x to 1x on lane R (redundant lane).
+ * 2. The link may fail to achieve lane alignment as a 4x, even though
+ * all 4 lanes achieve lane synchronization, and downtrain to a 1x.
+ * An SRIO port configured as a 1x port may fail to complete port
+ * initialization (PnESCSR[PU] never deasserts) because of scenario 1.
+ * Impact: SRIO port may downtrain to 1x, or may fail to complete
+ * link initialization. Once a port completes link initialization
+ * successfully, it will operate normally.
+ */
+static int srio_erratum_a004034(u8 port)
+{
+	serdes_corenet_t *srds_regs;
+	u32 conf_lane;
+	u32 init_lane;
+	int idx, first, last;
+	u32 i;
+	unsigned long long end_tick;
+	struct ccsr_rio *srio_regs = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
+
+	srds_regs = (void *)(CONFIG_SYS_FSL_CORENET_SERDES_ADDR);
+	conf_lane = (in_be32((void *)&srds_regs->srdspccr0)
+			>> (12 - port * 4)) & 0x3;
+	init_lane = (in_be32((void *)&srio_regs->lp_serial
+			.port[port].pccsr) >> 27) & 0x7;
+
+	/*
+	 * Start a counter set to ~2 ms after the SERDES reset is
+	 * complete (SERDES SRDSBnRSTCTL[RST_DONE]=1 for n
+	 * corresponding to the SERDES bank/PLL for the SRIO port).
+	 */
+	 if (in_be32((void *)&srds_regs->bank[0].rstctl)
+		& SRDS_RSTCTL_RSTDONE) {
+		/*
+		 * Poll the port uninitialized status (SRIO PnESCSR[PO]) until
+		 * PO=1 or the counter expires. If the counter expires, the
+		 * port has failed initialization: go to recover steps. If PO=1
+		 * and the desired port width is 1x, go to normal steps. If
+		 * PO = 1 and the desired port width is 4x, go to recover steps.
+		 */
+		end_tick = usec2ticks(2000) + get_ticks();
+		do {
+			if (in_be32((void *)&srio_regs->lp_serial
+				.port[port].pescsr) & 0x2) {
+				if (conf_lane == 0x1)
+					goto host_ok;
+				else {
+					if (init_lane == 0x2)
+						goto host_ok;
+					else
+						break;
+				}
+			}
+		} while (end_tick > get_ticks());
+
+		/* recover at most 3 times */
+		for (i = 0; i < 3; i++) {
+			/* Set SRIO PnCCSR[PD]=1 */
+			setbits_be32((void *)&srio_regs->lp_serial
+					.port[port].pccsr,
+					0x800000);
+			/*
+			* Set SRIO PnPCR[OBDEN] on the host to
+			* enable the discarding of any pending packets.
+			*/
+			setbits_be32((void *)&srio_regs->impl.port[port].pcr,
+				0x04);
+			/* Wait 50 us */
+			udelay(50);
+			/* Run sync command */
+			isync();
+
+			if (port)
+				first = serdes_get_first_lane(SRIO2);
+			else
+				first = serdes_get_first_lane(SRIO1);
+			if (unlikely(first < 0))
+				return -ENODEV;
+			if (conf_lane == 0x1)
+				last = first;
+			else
+				last = first + 3;
+			/*
+			 * Set SERDES BnGCRm0[RRST]=0 for each SRIO
+			 * bank n and lane m.
+			 */
+			for (idx = first; idx <= last; idx++)
+				clrbits_be32(&srds_regs->lane[idx].gcr0,
+				SRDS_GCR0_RRST);
+			/*
+			 * Read SERDES BnGCRm0 for each SRIO
+			 * bank n and lane m
+			 */
+			for (idx = first; idx <= last; idx++)
+				in_be32(&srds_regs->lane[idx].gcr0);
+			/* Run sync command */
+			isync();
+			/* Wait >= 100 ns */
+			udelay(1);
+			/*
+			 * Set SERDES BnGCRm0[RRST]=1 for each SRIO
+			 * bank n and lane m.
+			 */
+			for (idx = first; idx <= last; idx++)
+				setbits_be32(&srds_regs->lane[idx].gcr0,
+				SRDS_GCR0_RRST);
+			/*
+			 * Read SERDES BnGCRm0 for each SRIO
+			 * bank n and lane m
+			 */
+			for (idx = first; idx <= last; idx++)
+				in_be32(&srds_regs->lane[idx].gcr0);
+			/* Run sync command */
+			isync();
+			/* Wait >= 300 ns */
+			udelay(1);
+
+			/* Write 1 to clear all bits in SRIO PnSLCSR */
+			out_be32((void *)&srio_regs->impl.port[port].slcsr,
+				0xffffffff);
+			/* Clear SRIO PnPCR[OBDEN] on the host */
+			clrbits_be32((void *)&srio_regs->impl.port[port].pcr,
+				0x04);
+			/* Set SRIO PnCCSR[PD]=0 */
+			clrbits_be32((void *)&srio_regs->lp_serial
+				.port[port].pccsr,
+				0x800000);
+			/* Wait >= 24 ms */
+			udelay(24000);
+			/* Poll the state of the port again */
+			init_lane =
+				(in_be32((void *)&srio_regs->lp_serial
+					.port[port].pccsr) >> 27) & 0x7;
+			if (in_be32((void *)&srio_regs->lp_serial
+				.port[port].pescsr) & 0x2) {
+				if (conf_lane == 0x1)
+					goto host_ok;
+				else {
+					if (init_lane == 0x2)
+						goto host_ok;
+				}
+			}
+			if (i == 2)
+				return -ENODEV;
+		}
+	} else
+		return -ENODEV;
+
+host_ok:
+	/* Poll PnESCSR[OES] on the host until it is clear */
+	end_tick = usec2ticks(1000000) + get_ticks();
+	do {
+		if (!(in_be32((void *)&srio_regs->lp_serial.port[port].pescsr)
+			& 0x10000)) {
+			out_be32(((void *)&srio_regs->lp_serial
+				.port[port].pescsr), 0xffffffff);
+			out_be32(((void *)&srio_regs->phys_err
+				.port[port].edcsr), 0);
+			out_be32(((void *)&srio_regs->logical_err.ltledcsr), 0);
+			return 0;
+		}
+	} while (end_tick > get_ticks());
+
+	return -ENODEV;
+}
+#endif
+
 void srio_init(void)
 {
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
 	int srio1_used = 0, srio2_used = 0;
+	u32 *devdisr;
 
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+	devdisr = &gur->devdisr3;
+#else
+	devdisr = &gur->devdisr;
+#endif
 	if (is_serdes_configured(SRIO1)) {
 		set_next_law(CONFIG_SYS_SRIO1_MEM_PHYS,
 				law_size_bits(CONFIG_SYS_SRIO1_MEM_SIZE),
 				LAW_TRGT_IF_RIO_1);
 		srio1_used = 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+		if (srio_erratum_a004034(0) < 0)
+			printf("SRIO1: enabled but port error\n");
+		else
+#endif
 		printf("SRIO1: enabled\n");
 	} else {
 		printf("SRIO1: disabled\n");
@@ -73,7 +271,13 @@
 				law_size_bits(CONFIG_SYS_SRIO2_MEM_SIZE),
 				LAW_TRGT_IF_RIO_2);
 		srio2_used = 1;
+#ifdef CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+		if (srio_erratum_a004034(1) < 0)
+			printf("SRIO2: enabled but port error\n");
+		else
+#endif
 		printf("SRIO2: enabled\n");
+
 	} else {
 		printf("SRIO2: disabled\n");
 	}
@@ -82,20 +286,20 @@
 #ifdef CONFIG_FSL_CORENET
 	/* On FSL_CORENET devices we can disable individual ports */
 	if (!srio1_used)
-		setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1);
+		setbits_be32(devdisr, _DEVDISR_SRIO1);
 	if (!srio2_used)
-		setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2);
+		setbits_be32(devdisr, _DEVDISR_SRIO2);
 #endif
 
 	/* neither port is used - disable everything */
 	if (!srio1_used && !srio2_used) {
-		setbits_be32(&gur->devdisr, _DEVDISR_SRIO1);
-		setbits_be32(&gur->devdisr, _DEVDISR_SRIO2);
-		setbits_be32(&gur->devdisr, _DEVDISR_RMU);
+		setbits_be32(devdisr, _DEVDISR_SRIO1);
+		setbits_be32(devdisr, _DEVDISR_SRIO2);
+		setbits_be32(devdisr, _DEVDISR_RMU);
 	}
 }
 
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
 void srio_boot_master(int port)
 {
 	struct ccsr_rio *srio = (void *)CONFIG_SYS_FSL_SRIO_ADDR;
diff --git a/arch/powerpc/cpu/ppc4xx/traps.c b/arch/powerpc/cpu/ppc4xx/traps.c
index 9baa7a1..dae19cb 100644
--- a/arch/powerpc/cpu/ppc4xx/traps.c
+++ b/arch/powerpc/cpu/ppc4xx/traps.c
@@ -74,8 +74,7 @@
  * Trap & Exception support
  */
 
-void
-print_backtrace(unsigned long *sp)
+static void print_backtrace(unsigned long *sp)
 {
 	int cnt = 0;
 	unsigned long i;
@@ -95,7 +94,7 @@
 	printf("\n");
 }
 
-void show_regs(struct pt_regs * regs)
+void show_regs(struct pt_regs *regs)
 {
 	int i;
 
@@ -121,16 +120,14 @@
 }
 
 
-void
-_exception(int signr, struct pt_regs *regs)
+static void _exception(int signr, struct pt_regs *regs)
 {
 	show_regs(regs);
 	print_backtrace((unsigned long *)regs->gpr[1]);
 	panic("Exception");
 }
 
-void
-MachineCheckException(struct pt_regs *regs)
+void MachineCheckException(struct pt_regs *regs)
 {
 	unsigned long fixup, val;
 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
@@ -312,8 +309,7 @@
 	panic("machine check");
 }
 
-void
-AlignmentException(struct pt_regs *regs)
+void AlignmentException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -325,8 +321,7 @@
 	panic("Alignment Exception");
 }
 
-void
-ProgramCheckException(struct pt_regs *regs)
+void ProgramCheckException(struct pt_regs *regs)
 {
 	long esr_val;
 
@@ -349,8 +344,7 @@
 	panic("Program Check Exception");
 }
 
-void
-DecrementerPITException(struct pt_regs *regs)
+void DecrementerPITException(struct pt_regs *regs)
 {
 	/*
 	 * Reset PIT interrupt
@@ -364,8 +358,7 @@
 }
 
 
-void
-UnknownException(struct pt_regs *regs)
+void UnknownException(struct pt_regs *regs)
 {
 #if defined(CONFIG_CMD_KGDB)
 	if (debugger_exception_handler && (*debugger_exception_handler)(regs))
@@ -377,8 +370,7 @@
 	_exception(0, regs);
 }
 
-void
-DebugException(struct pt_regs *regs)
+void DebugException(struct pt_regs *regs)
 {
 	printf("Debugger trap at @ %lx\n", regs->nip );
 	show_regs(regs);
diff --git a/arch/powerpc/cpu/ppc4xx/u-boot.lds b/arch/powerpc/cpu/ppc4xx/u-boot.lds
index 2466b79..a96ddd5 100644
--- a/arch/powerpc/cpu/ppc4xx/u-boot.lds
+++ b/arch/powerpc/cpu/ppc4xx/u-boot.lds
@@ -78,9 +78,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index aa27741..03baaee 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -27,6 +27,8 @@
 #error "Do not define CONFIG_SYS_CCSRBAR_DEFAULT in the board header file."
 #endif
 
+#define FSL_DDR_VER_4_7	47
+
 /* Number of TLB CAM entries we have on FSL Book-E chips */
 #if defined(CONFIG_E500MC)
 #define CONFIG_SYS_NUM_TLBCAMS		64
@@ -311,6 +313,7 @@
 #define CONFIG_SYS_FSL_SRIO_MSG_UNIT_NUM	2
 
 #elif defined(CONFIG_PPC_P2041) /* also supports P2040 */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
 #define CONFIG_MAX_CPUS			4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
@@ -331,6 +334,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
@@ -338,8 +342,10 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2	0x11
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 
 #elif defined(CONFIG_PPC_P3041)
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
 #define CONFIG_MAX_CPUS			4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
@@ -360,6 +366,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
@@ -367,8 +374,10 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV2	0x11
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 
 #elif defined(CONFIG_PPC_P4080) /* also supports P4040 */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
 #define CONFIG_MAX_CPUS			8
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	4
 #define CONFIG_SYS_FSL_NUM_LAWS		32
@@ -389,7 +398,7 @@
 #define CONFIG_SYS_FSL_ERRATUM_ELBC_A001
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC135
-#define CONFIG_SYS_FSL_ERRATUM_ESDHC136
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC13
 #define CONFIG_SYS_P4080_ERRATUM_CPU22
 #define CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011
 #define CONFIG_SYS_P4080_ERRATUM_SERDES8
@@ -398,6 +407,7 @@
 #define CONFIG_SYS_P4080_ERRATUM_SERDES_A005
 #define CONFIG_SYS_FSL_ERRATUM_CPU_A003999
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
@@ -406,8 +416,11 @@
 #define CONFIG_SYS_FSL_ERRATUM_A004510
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x20
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xff000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
 
 #elif defined(CONFIG_PPC_P5020) /* also supports P5010 */
+#define CONFIG_SYS_PPC64		/* 64-bit core */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
 #define CONFIG_MAX_CPUS			2
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
 #define CONFIG_SYS_FSL_NUM_LAWS		32
@@ -426,12 +439,43 @@
 #define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 #define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
 #define CONFIG_SYS_FSL_ERRATUM_A004510
 #define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
 #define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xc0000000
+#define CONFIG_SYS_FSL_ERRATUM_SRIO_A004034
+
+#elif defined(CONFIG_PPC_P5040)
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS1
+#define CONFIG_MAX_CPUS			4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	3
+#define CONFIG_SYS_FSL_NUM_LAWS		32
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		2
+#define CONFIG_SYS_NUM_FM1_DTSEC	5
+#define CONFIG_SYS_NUM_FM1_10GEC	1
+#define CONFIG_SYS_NUM_FM2_DTSEC	5
+#define CONFIG_SYS_NUM_FM2_10GEC	1
+#define CONFIG_NUM_DDR_CONTROLLERS	2
+#define CONFIG_SYS_FM_MURAM_SIZE	0x28000
+#define CONFIG_SYS_FSL_TBCLK_DIV	16
+#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_SYS_FSL_ERRATUM_USB138
+#define CONFIG_SYS_FSL_ERRATUM_DDR_A003
+#define CONFIG_SYS_FSL_ERRATUM_DDR_A003474
+#define CONFIG_SYS_FSL_ERRATUM_A004699
+#define CONFIG_SYS_FSL_ELBC_MULTIBIT_ECC
+#define CONFIG_SYS_FSL_ERRATUM_A004510
+#define CONFIG_SYS_FSL_ERRATUM_A004510_SVR_REV	0x10
+#define CONFIG_SYS_FSL_CORENET_SNOOPVEC_COREONLY 0xf0000000
 
 #elif defined(CONFIG_BSC9131)
 #define CONFIG_MAX_CPUS			1
@@ -445,6 +489,63 @@
 #define CONFIG_SYS_FSL_ERRATUM_IFC_A003399
 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
 
+#elif defined(CONFIG_PPC_T4240)
+#define CONFIG_SYS_PPC64		/* 64-bit core */
+#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
+#define CONFIG_MAX_CPUS			12
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	5
+#define CONFIG_SYS_FSL_NUM_LAWS		32
+#define CONFIG_SYS_FSL_SRDS_3
+#define CONFIG_SYS_FSL_SRDS_4
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		2
+#define CONFIG_SYS_NUM_FM1_DTSEC	8
+#define CONFIG_SYS_NUM_FM1_10GEC	2
+#define CONFIG_SYS_NUM_FM2_DTSEC	8
+#define CONFIG_SYS_NUM_FM2_10GEC	2
+#define CONFIG_NUM_DDR_CONTROLLERS	3
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM_MURAM_SIZE	0x60000
+#define CONFIG_SYS_FSL_TBCLK_DIV	16
+#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v3.0"
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB2_PHY_ENABLE
+#define CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY
+#define CONFIG_SYS_FSL_ERRATUM_A004468
+#define CONFIG_SYS_FSL_ERRATUM_A_004934
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
+
+#elif defined(CONFIG_PPC_B4860)
+#define CONFIG_SYS_PPC64		/* 64-bit core */
+#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
+#define CONFIG_SYS_FSL_QORIQ_CHASSIS2	/* Freescale Chassis generation 2 */
+#define CONFIG_SYS_FSL_QMAN_V3		/* QMAN version 3 */
+#define CONFIG_MAX_CPUS			4
+#define CONFIG_SYS_FSL_NUM_CC_PLLS	4
+#define CONFIG_SYS_FSL_NUM_LAWS		32
+#define CONFIG_SYS_FSL_SEC_COMPAT	4
+#define CONFIG_SYS_NUM_FMAN		1
+#define CONFIG_SYS_NUM_FM1_DTSEC	6
+#define CONFIG_SYS_NUM_FM1_10GEC	2
+#define CONFIG_NUM_DDR_CONTROLLERS	1
+#define CONFIG_SYS_FSL_DDR_VER		FSL_DDR_VER_4_7
+#define CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM_MURAM_SIZE	0x60000
+#define CONFIG_SYS_FSL_TBCLK_DIV	16
+#define CONFIG_SYS_FSL_PCIE_COMPAT	"fsl,qoriq-pcie-v2.4"
+#define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
+#define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
+#define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
+#define CONFIG_SYS_FSL_USB1_PHY_ENABLE
+#define CONFIG_SYS_FSL_ERRATUM_A_004934
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xfe000000
+
 #else
 #error Processor type not defined for this platform
 #endif
diff --git a/arch/powerpc/include/asm/fsl_ddr_sdram.h b/arch/powerpc/include/asm/fsl_ddr_sdram.h
index e271342..640d329 100644
--- a/arch/powerpc/include/asm/fsl_ddr_sdram.h
+++ b/arch/powerpc/include/asm/fsl_ddr_sdram.h
@@ -84,6 +84,8 @@
 #define FSL_DDR_4WAY_4KB_INTERLEAVING	0x1C
 #define FSL_DDR_4WAY_8KB_INTERLEAVING	0x1D
 
+#define SDRAM_CS_CONFIG_EN		0x80000000
+
 /* DDR_SDRAM_CFG - DDR SDRAM Control Configuration
  */
 #define SDRAM_CFG_MEM_EN		0x80000000
@@ -96,6 +98,7 @@
 #define SDRAM_CFG_SDRAM_TYPE_SHIFT	24
 #define SDRAM_CFG_DYN_PWR		0x00200000
 #define SDRAM_CFG_DBW_MASK		0x00180000
+#define SDRAM_CFG_DBW_SHIFT		19
 #define SDRAM_CFG_32_BE			0x00080000
 #define SDRAM_CFG_16_BE			0x00100000
 #define SDRAM_CFG_8_BE			0x00040000
@@ -145,6 +148,31 @@
 
 /* DDR_CDR1 */
 #define DDR_CDR1_DHC_EN	0x80000000
+#define DDR_CDR1_ODT_SHIFT	17
+#define DDR_CDR1_ODT_MASK	0x6
+#define DDR_CDR2_ODT_MASK	0x1
+#define DDR_CDR1_ODT(x) ((x & DDR_CDR1_ODT_MASK) << DDR_CDR1_ODT_SHIFT)
+#define DDR_CDR2_ODT(x) (x & DDR_CDR2_ODT_MASK)
+
+#if (defined(CONFIG_SYS_FSL_DDR_VER) && \
+	(CONFIG_SYS_FSL_DDR_VER >= FSL_DDR_VER_4_7))
+#define DDR_CDR_ODT_OFF		0x0
+#define DDR_CDR_ODT_120ohm	0x1
+#define DDR_CDR_ODT_180ohm	0x2
+#define DDR_CDR_ODT_75ohm	0x3
+#define DDR_CDR_ODT_110ohm	0x4
+#define DDR_CDR_ODT_60hm	0x5
+#define DDR_CDR_ODT_70ohm	0x6
+#define DDR_CDR_ODT_47ohm	0x7
+#else
+#define DDR_CDR_ODT_75ohm	0x0
+#define DDR_CDR_ODT_55ohm	0x1
+#define DDR_CDR_ODT_60ohm	0x2
+#define DDR_CDR_ODT_50ohm	0x3
+#define DDR_CDR_ODT_150ohm	0x4
+#define DDR_CDR_ODT_43ohm	0x5
+#define DDR_CDR_ODT_120ohm	0x6
+#endif
 
 /* Record of register values computed */
 typedef struct fsl_ddr_cfg_regs_s {
@@ -177,6 +205,8 @@
 	unsigned int timing_cfg_5;
 	unsigned int ddr_zq_cntl;
 	unsigned int ddr_wrlvl_cntl;
+	unsigned int ddr_wrlvl_cntl_2;
+	unsigned int ddr_wrlvl_cntl_3;
 	unsigned int ddr_sr_cntr;
 	unsigned int ddr_sdram_rcw_1;
 	unsigned int ddr_sdram_rcw_2;
@@ -262,6 +292,8 @@
 	unsigned int wrlvl_override;
 	unsigned int wrlvl_sample;		/* Write leveling */
 	unsigned int wrlvl_start;
+	unsigned int wrlvl_ctl_2;
+	unsigned int wrlvl_ctl_3;
 
 	unsigned int half_strength_driver_enable;
 	unsigned int twoT_en;
@@ -288,6 +320,7 @@
 	unsigned int rcw_2;
 	/* control register 1 */
 	unsigned int ddr_cdr1;
+	unsigned int ddr_cdr2;
 
 	unsigned int trwt_override;
 	unsigned int trwt;			/* read-to-write turnaround */
@@ -298,6 +331,7 @@
 extern int fsl_use_spd(void);
 extern void fsl_ddr_set_memctl_regs(const fsl_ddr_cfg_regs_t *regs,
 					unsigned int ctrl_num);
+u32 fsl_ddr_get_intl3r(void);
 
 /*
  * The 85xx boards have a common prototype for fixed_sdram so put the
diff --git a/arch/powerpc/include/asm/fsl_fman.h b/arch/powerpc/include/asm/fsl_fman.h
index 2c0c9bc..299daca 100644
--- a/arch/powerpc/include/asm/fsl_fman.h
+++ b/arch/powerpc/include/asm/fsl_fman.h
@@ -423,6 +423,14 @@
 	u8	res[4*1024];
 } fm_10gec_mdio_t;
 
+typedef struct fm_memac {
+	u8	res[4*1024];
+} fm_memac_t;
+
+typedef struct fm_memac_mdio {
+	u8	res[4*1024];
+} fm_memac_mdio_t;
+
 typedef struct fm_1588 {
 	u8	res[4*1024];
 } fm_1588_t;
@@ -446,6 +454,14 @@
 	u8			res1[8*1024];
 	fm_soft_parser_t	fm_soft_parser;
 	u8			res2[96*1024];
+#ifdef CONFIG_SYS_FMAN_V3
+	struct {
+		fm_memac_t		fm_memac;
+		fm_memac_mdio_t		fm_memac_mdio;
+	} memac[10];
+	u8			res4[32*1024];
+	fm_memac_mdio_t		fm_dedicated_mdio[2];
+#else
 	struct {
 		fm_dtsec_t	fm_dtesc;
 		fm_mdio_t	fm_mdio;
@@ -455,6 +471,7 @@
 		fm_10gec_mdio_t		fm_10gec_mdio;
 	} mac_10g[1];
 	u8			res4[48*1024];
+#endif
 	fm_1588_t		fm_1588;
 	u8			res5[4*1024];
 } ccsr_fman_t;
diff --git a/arch/powerpc/include/asm/fsl_liodn.h b/arch/powerpc/include/asm/fsl_liodn.h
index a9973b8..d759de9 100644
--- a/arch/powerpc/include/asm/fsl_liodn.h
+++ b/arch/powerpc/include/asm/fsl_liodn.h
@@ -94,6 +94,11 @@
 	SET_GUTS_LIODN(compat, liodn, pex##pciNum##liodnr,\
 		CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
 
+#define SET_PCI_LIODN_BASE(compat, pciNum, liodn) \
+	SET_LIODN_ENTRY_1(compat, liodn,\
+		offsetof(ccsr_pcix_t, liodn_base) + CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET,\
+		CONFIG_SYS_MPC85xx_PCIE##pciNum##_OFFSET)
+
 /* reg nodes for DMA start @ 0x300 */
 #define SET_DMA_LIODN(dmaNum, liodn) \
 	SET_GUTS_LIODN("fsl,eloplus-dma", liodn, dma##dmaNum##liodnr,\
@@ -118,6 +123,12 @@
 		CONFIG_SYS_FSL_CORENET_PME_OFFSET, \
 		CONFIG_SYS_FSL_CORENET_PME_OFFSET)
 
+#define SET_PMAN_LIODN(num, liodn) \
+	SET_LIODN_ENTRY_2("fsl,pman", liodn, 0, \
+		offsetof(struct ccsr_pman, ppa1) + \
+		CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET, \
+		CONFIG_SYS_FSL_CORENET_PMAN##num##_OFFSET)
+
 /* -1 from portID due to how immap has the registers */
 #define FM_PPID_RX_PORT_OFFSET(fmNum, portID) \
 	CONFIG_SYS_FSL_FM##fmNum##_OFFSET + \
@@ -184,11 +195,13 @@
 extern struct liodn_id_table liodn_tbl[], liodn_bases[], sec_liodn_tbl[];
 extern struct liodn_id_table raide_liodn_tbl[];
 extern struct liodn_id_table fman1_liodn_tbl[], fman2_liodn_tbl[];
+#ifdef CONFIG_SYS_SRIO
 extern struct srio_liodn_id_table srio_liodn_tbl[];
+extern int srio_liodn_tbl_sz;
+#endif
 extern struct liodn_id_table rman_liodn_tbl[];
 extern int liodn_tbl_sz, sec_liodn_tbl_sz, raide_liodn_tbl_sz;
 extern int fman1_liodn_tbl_sz, fman2_liodn_tbl_sz;
-extern int srio_liodn_tbl_sz;
 extern int rman_liodn_tbl_sz;
 
 #endif
diff --git a/arch/powerpc/include/asm/fsl_memac.h b/arch/powerpc/include/asm/fsl_memac.h
new file mode 100644
index 0000000..d6b60e6
--- /dev/null
+++ b/arch/powerpc/include/asm/fsl_memac.h
@@ -0,0 +1,271 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *	Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MEMAC_H__
+#define __MEMAC_H__
+
+#include <phy.h>
+
+struct memac {
+	/* memac general control and status registers */
+	u32	res_0[2];
+	u32	command_config;	/* Control and configuration register */
+	u32	mac_addr_0;	/* Lower 32 bits of 48-bit MAC address */
+	u32	mac_addr_1;	/* Upper 16 bits of 48-bit MAC address */
+	u32	maxfrm;		/* Maximum frame length register */
+	u32	res_18[5];
+	u32	hashtable_ctrl;	/* Hash table control register */
+	u32	res_30[4];
+	u32	ievent;		/* Interrupt event register */
+	u32	tx_ipg_length;	/* Transmitter inter-packet-gap register */
+	u32	res_48;
+	u32	imask;		/* interrupt mask register */
+	u32	res_50;
+	u32	cl_pause_quanta[4]; /* CL01-CL67 pause quanta register */
+	u32	cl_pause_thresh[4]; /* CL01-CL67 pause thresh register */
+	u32	rx_pause_status;	/* Receive pause status register */
+	u32	res_78[2];
+	u32	mac_addr[14];	/* MAC address */
+	u32	lpwake_timer;	/* EEE low power wakeup timer register */
+	u32	sleep_timer;	/* Transmit EEE Low Power Timer register */
+	u32	res_c0[8];
+	u32	statn_config;	/* Statistics configuration register */
+	u32	res_e4[7];
+
+	/* memac statistics counter registers */
+	u32	rx_eoct_l;	/* Rx ethernet octests lower */
+	u32	rx_eoct_u;	/* Rx ethernet octests upper */
+	u32	rx_oct_l;	/* Rx octests lower */
+	u32	rx_oct_u;	/* Rx octests upper */
+	u32	rx_align_err_l;	/* Rx alignment error lower */
+	u32	rx_align_err_u;	/* Rx alignment error upper */
+	u32	rx_pause_frame_l; /* Rx valid pause frame upper */
+	u32	rx_pause_frame_u; /* Rx valid pause frame upper */
+	u32	rx_frame_l;	/* Rx frame counter lower */
+	u32	rx_frame_u;	/* Rx frame counter upper */
+	u32	rx_frame_crc_err_l; /* Rx frame check sequence error lower */
+	u32	rx_frame_crc_err_u; /* Rx frame check sequence error upper */
+	u32	rx_vlan_l;	/* Rx VLAN frame lower */
+	u32	rx_vlan_u;	/* Rx VLAN frame upper */
+	u32	rx_err_l;	/* Rx frame error lower */
+	u32	rx_err_u;	/* Rx frame error upper */
+	u32	rx_uni_l;	/* Rx unicast frame lower */
+	u32	rx_uni_u;	/* Rx unicast frame upper */
+	u32	rx_multi_l;	/* Rx multicast frame lower */
+	u32	rx_multi_u;	/* Rx multicast frame upper */
+	u32	rx_brd_l;	/* Rx broadcast frame lower */
+	u32	rx_brd_u;	/* Rx broadcast frame upper */
+	u32	rx_drop_l;	/* Rx dropped packets lower */
+	u32	rx_drop_u;	/* Rx dropped packets upper */
+	u32	rx_pkt_l;	/* Rx packets lower */
+	u32	rx_pkt_u;	/* Rx packets upper */
+	u32	rx_undsz_l;	/* Rx undersized packet lower */
+	u32	rx_undsz_u;	/* Rx undersized packet upper */
+	u32	rx_64_l;	/* Rx 64 oct packet lower */
+	u32	rx_64_u;	/* Rx 64 oct packet upper */
+	u32	rx_127_l;	/* Rx 65 to 127 oct packet lower */
+	u32	rx_127_u;	/* Rx 65 to 127 oct packet upper */
+	u32	rx_255_l;	/* Rx 128 to 255 oct packet lower */
+	u32	rx_255_u;	/* Rx 128 to 255 oct packet upper */
+	u32	rx_511_l;	/* Rx 256 to 511 oct packet lower */
+	u32	rx_511_u;	/* Rx 256 to 511 oct packet upper */
+	u32	rx_1023_l;	/* Rx 512 to 1023 oct packet lower */
+	u32	rx_1023_u;	/* Rx 512 to 1023 oct packet upper */
+	u32	rx_1518_l;	/* Rx 1024 to 1518 oct packet lower */
+	u32	rx_1518_u;	/* Rx 1024 to 1518 oct packet upper */
+	u32	rx_1519_l;	/* Rx 1519 to max oct packet lower */
+	u32	rx_1519_u;	/* Rx 1519 to max oct packet upper */
+	u32	rx_oversz_l;	/* Rx oversized packet lower */
+	u32	rx_oversz_u;	/* Rx oversized packet upper */
+	u32	rx_jabber_l;	/* Rx Jabber packet lower */
+	u32	rx_jabber_u;	/* Rx Jabber packet upper */
+	u32	rx_frag_l;	/* Rx Fragment packet lower */
+	u32	rx_frag_u;	/* Rx Fragment packet upper */
+	u32	rx_cnp_l;	/* Rx control packet lower */
+	u32	rx_cnp_u;	/* Rx control packet upper */
+	u32	rx_drntp_l;	/* Rx dripped not truncated packet lower */
+	u32	rx_drntp_u;	/* Rx dripped not truncated packet upper */
+	u32	res_1d0[0xc];
+
+	u32	tx_eoct_l;	/* Tx ethernet octests lower */
+	u32	tx_eoct_u;	/* Tx ethernet octests upper */
+	u32	tx_oct_l;	/* Tx octests lower */
+	u32	tx_oct_u;	/* Tx octests upper */
+	u32	res_210[0x2];
+	u32	tx_pause_frame_l; /* Tx valid pause frame lower */
+	u32	tx_pause_frame_u; /* Tx valid pause frame upper */
+	u32	tx_frame_l;	/* Tx frame counter lower */
+	u32	tx_frame_u;	/* Tx frame counter upper */
+	u32	tx_frame_crc_err_l; /* Tx frame check sequence error lower */
+	u32	tx_frame_crc_err_u; /* Tx frame check sequence error upper */
+	u32	tx_vlan_l;	/* Tx VLAN frame lower */
+	u32	tx_vlan_u;	/* Tx VLAN frame upper */
+	u32	tx_frame_err_l;	/* Tx frame error lower */
+	u32	tx_frame_err_u;	/* Tx frame error upper */
+	u32	tx_uni_l;	/* Tx unicast frame lower */
+	u32	tx_uni_u;	/* Tx unicast frame upper */
+	u32	tx_multi_l;	/* Tx multicast frame lower */
+	u32	tx_multi_u;	/* Tx multicast frame upper */
+	u32	tx_brd_l;	/* Tx broadcast frame lower */
+	u32	tx_brd_u;	/* Tx broadcast frame upper */
+	u32	res_258[0x2];
+	u32	tx_pkt_l;	/* Tx packets lower */
+	u32	tx_pkt_u;	/* Tx packets upper */
+	u32	tx_undsz_l;	/* Tx undersized packet lower */
+	u32	tx_undsz_u;	/* Tx undersized packet upper */
+	u32	tx_64_l;	/* Tx 64 oct packet lower */
+	u32	tx_64_u;	/* Tx 64 oct packet upper */
+	u32	tx_127_l;	/* Tx 65 to 127 oct packet lower */
+	u32	tx_127_u;	/* Tx 65 to 127 oct packet upper */
+	u32	tx_255_l;	/* Tx 128 to 255 oct packet lower */
+	u32	tx_255_u;	/* Tx 128 to 255 oct packet upper */
+	u32	tx_511_l;	/* Tx 256 to 511 oct packet lower */
+	u32	tx_511_u;	/* Tx 256 to 511 oct packet upper */
+	u32	tx_1023_l;	/* Tx 512 to 1023 oct packet lower */
+	u32	tx_1023_u;	/* Tx 512 to 1023 oct packet upper */
+	u32	tx_1518_l;	/* Tx 1024 to 1518 oct packet lower */
+	u32	tx_1518_u;	/* Tx 1024 to 1518 oct packet upper */
+	u32	tx_1519_l;	/* Tx 1519 to max oct packet lower */
+	u32	tx_1519_u;	/* Tx 1519 to max oct packet upper */
+	u32	res_2a8[0x6];
+	u32	tx_cnp_l;	/* Tx control packet lower */
+	u32	tx_cnp_u;	/* Tx control packet upper */
+	u32	res_2c8[0xe];
+
+	/* Line interface control register */
+	u32 if_mode;		/* interface mode control */
+	u32 if_status;		/* interface status */
+	u32 res_308[0xe];
+
+	/* HiGig/2 Register */
+	u32 hg_config;	/* HiGig2 control and configuration */
+	u32 res_344[0x3];
+	u32 hg_pause_quanta;	/* HiGig2 pause quanta */
+	u32 res_354[0x3];
+	u32 hg_pause_thresh;	/* HiGig2 pause quanta threshold */
+	u32 res_364[0x3];
+	u32 hgrx_pause_status;	/* HiGig2 rx pause quanta status */
+	u32 hg_fifos_status;	/* HiGig2 fifos status */
+	u32 rhm;	/* Rx HiGig2 message counter register */
+	u32 thm;/* Tx HiGig2 message counter register */
+	u32 res_380[0x320];
+};
+
+/* COMMAND_CONFIG - command and configuration register */
+#define MEMAC_CMD_CFG_RX_EN		0x00000002 /* MAC Rx path enable */
+#define MEMAC_CMD_CFG_TX_EN		0x00000001 /* MAC Tx path enable */
+#define MEMAC_CMD_CFG_RXTX_EN	(MEMAC_CMD_CFG_RX_EN | MEMAC_CMD_CFG_TX_EN)
+
+/* HASHTABLE_CTRL - Hashtable control register */
+#define HASHTABLE_CTRL_MCAST_EN	0x00000200 /* enable mulitcast Rx hash */
+#define HASHTABLE_CTRL_ADDR_MASK	0x000001ff
+
+/* TX_IPG_LENGTH - Transmit inter-packet gap length register */
+#define TX_IPG_LENGTH_IPG_LEN_MASK	0x000003ff
+
+/* IMASK - interrupt mask register */
+#define IMASK_MDIO_SCAN_EVENT	0x00010000 /* MDIO scan event mask */
+#define IMASK_MDIO_CMD_CMPL	0x00008000 /* MDIO cmd completion mask */
+#define IMASK_REM_FAULT		0x00004000 /* remote fault mask */
+#define IMASK_LOC_FAULT		0x00002000 /* local fault mask */
+#define IMASK_TX_ECC_ER		0x00001000 /* Tx frame ECC error mask */
+#define IMASK_TX_FIFO_UNFL	0x00000800 /* Tx FIFO underflow mask */
+#define IMASK_TX_ER		0x00000200 /* Tx frame error mask */
+#define IMASK_RX_FIFO_OVFL	0x00000100 /* Rx FIFO overflow mask */
+#define IMASK_RX_ECC_ER		0x00000080 /* Rx frame ECC error mask */
+#define IMASK_RX_JAB_FRM	0x00000040 /* Rx jabber frame mask */
+#define IMASK_RX_OVRSZ_FRM	0x00000020 /* Rx oversized frame mask */
+#define IMASK_RX_RUNT_FRM	0x00000010 /* Rx runt frame mask */
+#define IMASK_RX_FRAG_FRM	0x00000008 /* Rx fragment frame mask */
+#define IMASK_RX_LEN_ER		0x00000004 /* Rx payload length error mask */
+#define IMASK_RX_CRC_ER		0x00000002 /* Rx CRC error mask */
+#define IMASK_RX_ALIGN_ER	0x00000001 /* Rx alignment error mask */
+
+#define IMASK_MASK_ALL		0x00000000
+
+/* IEVENT - interrupt event register */
+#define IEVENT_MDIO_SCAN_EVENT	0x00010000 /* MDIO scan event */
+#define IEVENT_MDIO_CMD_CMPL	0x00008000 /* MDIO cmd completion */
+#define IEVENT_REM_FAULT	0x00004000 /* remote fault */
+#define IEVENT_LOC_FAULT	0x00002000 /* local fault */
+#define IEVENT_TX_ECC_ER	0x00001000 /* Tx frame ECC error */
+#define IEVENT_TX_FIFO_UNFL	0x00000800 /* Tx FIFO underflow */
+#define IEVENT_TX_ER		0x00000200 /* Tx frame error */
+#define IEVENT_RX_FIFO_OVFL	0x00000100 /* Rx FIFO overflow */
+#define IEVENT_RX_ECC_ER	0x00000080 /* Rx frame ECC error */
+#define IEVENT_RX_JAB_FRM	0x00000040 /* Rx jabber frame */
+#define IEVENT_RX_OVRSZ_FRM	0x00000020 /* Rx oversized frame */
+#define IEVENT_RX_RUNT_FRM	0x00000010 /* Rx runt frame */
+#define IEVENT_RX_FRAG_FRM	0x00000008 /* Rx fragment frame */
+#define IEVENT_RX_LEN_ER	0x00000004 /* Rx payload length error */
+#define IEVENT_RX_CRC_ER	0x00000002 /* Rx CRC error */
+#define IEVENT_RX_ALIGN_ER	0x00000001 /* Rx alignment error */
+
+#define IEVENT_CLEAR_ALL	0xffffffff
+
+/* IF_MODE - Interface Mode Register */
+#define IF_MODE_EN_AUTO	0x00008000 /* 1 - Enable automatic speed selection */
+#define IF_MODE_XGMII	0x00000000 /* 00- XGMII(10) interface mode */
+#define IF_MODE_GMII		0x00000002 /* 10- GMII interface mode */
+#define IF_MODE_MASK	0x00000003 /* mask for mode interface mode */
+#define IF_MODE_RG		0x00000004 /* 1- RGMII */
+#define IF_MODE_RM		0x00000008 /* 1- RGMII */
+
+#define IF_DEFAULT	(IF_GMII)
+
+/* Internal PHY Registers - SGMII */
+#define PHY_SGMII_CR_PHY_RESET      0x8000
+#define PHY_SGMII_CR_RESET_AN       0x0200
+#define PHY_SGMII_CR_DEF_VAL        0x1140
+#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001
+#define PHY_SGMII_IF_MODE_AN        0x0002
+#define PHY_SGMII_IF_MODE_SGMII     0x0001
+
+struct memac_mdio_controller {
+	u32	res0[0xc];
+	u32	mdio_stat;	/* MDIO configuration and status */
+	u32	mdio_ctl;	/* MDIO control */
+	u32	mdio_data;	/* MDIO data */
+	u32	mdio_addr;	/* MDIO address */
+};
+
+#define MDIO_STAT_CLKDIV(x)	(((x>>1) & 0xff) << 8)
+#define MDIO_STAT_BSY		(1 << 0)
+#define MDIO_STAT_RD_ER		(1 << 1)
+#define MDIO_STAT_PRE		(1 << 5)
+#define MDIO_STAT_ENC		(1 << 6)
+#define MDIO_STAT_HOLD_15_CLK	(7 << 2)
+
+#define MDIO_CTL_DEV_ADDR(x)	(x & 0x1f)
+#define MDIO_CTL_PORT_ADDR(x)	((x & 0x1f) << 5)
+#define MDIO_CTL_PRE_DIS	(1 << 10)
+#define MDIO_CTL_SCAN_EN	(1 << 11)
+#define MDIO_CTL_POST_INC	(1 << 14)
+#define MDIO_CTL_READ		(1 << 15)
+
+#define MDIO_DATA(x)		(x & 0xffff)
+#define MDIO_DATA_BSY		(1 << 31)
+
+struct fsl_enet_mac;
+
+void init_memac(struct fsl_enet_mac *mac, void *base, void *phyregs,
+		int max_rx_len);
+
+#endif
diff --git a/arch/powerpc/include/asm/fsl_portals.h b/arch/powerpc/include/asm/fsl_portals.h
index 5644044..b75f5b9 100644
--- a/arch/powerpc/include/asm/fsl_portals.h
+++ b/arch/powerpc/include/asm/fsl_portals.h
@@ -32,15 +32,16 @@
 	FSL_HW_PORTAL_FMAN2,
 #endif
 #endif
-#ifdef CONFIG_SYS_DPAA_PME
 	FSL_HW_PORTAL_PME,
-#endif
 #ifdef CONFIG_SYS_FSL_RAID_ENGINE
 	FSL_HW_PORTAL_RAID_ENGINE,
 #endif
 #ifdef CONFIG_SYS_DPAA_RMAN
 	FSL_HW_PORTAL_RMAN,
 #endif
+#ifdef CONFIG_SYS_DPAA_DCE
+	FSL_HW_PORTAL_DCE,
+#endif
 
 };
 
diff --git a/arch/powerpc/include/asm/fsl_serdes.h b/arch/powerpc/include/asm/fsl_serdes.h
index 22525f1..6cd7379 100644
--- a/arch/powerpc/include/asm/fsl_serdes.h
+++ b/arch/powerpc/include/asm/fsl_serdes.h
@@ -37,11 +37,17 @@
 	SGMII_FM1_DTSEC3,
 	SGMII_FM1_DTSEC4,
 	SGMII_FM1_DTSEC5,
+	SGMII_FM1_DTSEC6,
+	SGMII_FM1_DTSEC9,
+	SGMII_FM1_DTSEC10,
 	SGMII_FM2_DTSEC1,
 	SGMII_FM2_DTSEC2,
 	SGMII_FM2_DTSEC3,
 	SGMII_FM2_DTSEC4,
 	SGMII_FM2_DTSEC5,
+	SGMII_FM2_DTSEC6,
+	SGMII_FM2_DTSEC9,
+	SGMII_FM2_DTSEC10,
 	SGMII_TSEC1,
 	SGMII_TSEC2,
 	SGMII_TSEC3,
@@ -49,13 +55,49 @@
 	XAUI_FM1,
 	XAUI_FM2,
 	AURORA,
+	CPRI1,
+	CPRI2,
+	CPRI3,
+	CPRI4,
+	CPRI5,
+	CPRI6,
+	CPRI7,
+	CPRI8,
+	XAUI_FM1_MAC9,
+	XAUI_FM1_MAC10,
+	XAUI_FM2_MAC9,
+	XAUI_FM2_MAC10,
+	HIGIG_FM1_MAC9,
+	HIGIG_FM1_MAC10,
+	HIGIG_FM2_MAC9,
+	HIGIG_FM2_MAC10,
+	QSGMII_FM1_A,		/* A indicates MACs 1-4 */
+	QSGMII_FM1_B,		/* B indicates MACs 5,6,9,10 */
+	QSGMII_FM2_A,
+	QSGMII_FM2_B,
+	XFI_FM1_MAC9,
+	XFI_FM1_MAC10,
+	XFI_FM2_MAC9,
+	XFI_FM2_MAC10,
+	INTERLAKEN,
+};
+
+enum srds {
+	FSL_SRDS_1  = 0,
+	FSL_SRDS_2  = 1,
+	FSL_SRDS_3  = 2,
+	FSL_SRDS_4  = 3,
 };
 
 int is_serdes_configured(enum srds_prtcl device);
 void fsl_serdes_init(void);
 
 #ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int serdes_get_first_lane(u32 sd, enum srds_prtcl device);
+#else
 int serdes_get_first_lane(enum srds_prtcl device);
+#endif
 #ifdef CONFIG_SYS_P4080_ERRATUM_SERDES9
 void serdes_reset_rx(enum srds_prtcl device);
 #endif
diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h
index 5a5877f..cb3a80b 100644
--- a/arch/powerpc/include/asm/global_data.h
+++ b/arch/powerpc/include/asm/global_data.h
@@ -38,7 +38,7 @@
 typedef	struct	global_data {
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	cpu_clk;	/* CPU clock in Hz! */
 	unsigned long	bus_clk;
 #if defined(CONFIG_8xx)
@@ -63,6 +63,8 @@
 	u32 tsec1_clk;
 	u32 tsec2_clk;
 	u32 usbdr_clk;
+#elif defined(CONFIG_MPC8309)
+	u32 usbdr_clk;
 #endif
 #if defined (CONFIG_MPC834x)
 	u32 usbmph_clk;
diff --git a/arch/powerpc/include/asm/immap_83xx.h b/arch/powerpc/include/asm/immap_83xx.h
index 2ba502a..679832c 100644
--- a/arch/powerpc/include/asm/immap_83xx.h
+++ b/arch/powerpc/include/asm/immap_83xx.h
@@ -73,12 +73,19 @@
 	u32 obir;		/* Output Buffer Impedance Register */
 	u8 res8[0xC];
 	u32 pecr1;		/* PCI Express control register 1 */
-#ifdef CONFIG_MPC8308
-	u32 sdhccr;		/* eSDHC Control Registers for MPC8308 */
+#if defined(CONFIG_MPC830x)
+	u32 sdhccr;		/* eSDHC Control Registers for MPC830x */
 #else
 	u32 pecr2;		/* PCI Express control register 2 */
 #endif
+#if defined(CONFIG_MPC8309)
+	u32 can_dbg_ctrl;
+	u32 res9a;
+	u32 gpr1;
+	u8 res9b[0xAC];
+#else
 	u8 res9[0xB8];
+#endif
 } sysconf83xx_t;
 
 /*
@@ -708,7 +715,11 @@
  * On Chip ROM
  */
 typedef struct rom83xx {
+#if defined(CONFIG_MPC8309)
+	u8 mem[0x8000];
+#else
 	u8 mem[0x10000];
+#endif
 } rom83xx_t;
 
 /*
@@ -972,6 +983,56 @@
 	u8			res8[0xC0000];
 	u8			qe[0x100000];	/* QE block */
 } immap_t;
+#elif defined(CONFIG_MPC8309)
+typedef struct immap {
+	sysconf83xx_t		sysconf;	/* System configuration */
+	wdt83xx_t		wdt;		/* Watch Dog Timer (WDT) Registers */
+	rtclk83xx_t		rtc;		/* Real Time Clock Module Registers */
+	rtclk83xx_t		pit;		/* Periodic Interval Timer */
+	gtm83xx_t		gtm[2];		/* Global Timers Module */
+	ipic83xx_t		ipic;		/* Integrated Programmable Interrupt Controller */
+	arbiter83xx_t		arbiter;	/* System Arbiter Registers */
+	reset83xx_t		reset;		/* Reset Module */
+	clk83xx_t		clk;		/* System Clock Module */
+	pmc83xx_t		pmc;		/* Power Management Control Module */
+	gpio83xx_t		gpio[2];	/* General purpose I/O module */
+	u8			res0[0x500];	/* res0 1.25 KBytes added for 8309 */
+	qepi83xx_t		qepi;		/* QE Ports Interrupts Registers */
+	qepio83xx_t		qepio;		/* QE Parallel I/O ports */
+	u8			res1[0x800];
+	ddr83xx_t		ddr;		/* DDR Memory Controller Memory */
+	fsl_i2c_t		i2c[2];		/* I2C Controllers */
+	u8			res2[0x1300];
+	duart83xx_t		duart[2];	/* DUART */
+	u8			res3[0x200];
+	duart83xx_t		duart1[2];	/* DUART */
+	u8			res4[0x500];
+	fsl_lbc_t		im_lbc;		/* Local Bus Controller Regs */
+	u8			res5[0x1000];
+	u8			spi[0x100];
+	u8			res6[0xf00];
+	dma83xx_t		dma;		/* DMA */
+	pciconf83xx_t		pci_conf[1];	/* PCI Configuration Registers */
+	u8			res7[0x80];
+	ios83xx_t		ios;		/* Sequencer (IOS) */
+	pcictrl83xx_t		pci_ctrl[1];	/* PCI Control & Status Registers */
+	u8			res8[0x13A00];
+	u8			can1[0x1000];	/* Flexcan 1 */
+	u8			can2[0x1000];	/* Flexcan 2 */
+	u8			res9[0x5000];
+	usb83xx_t		usb;
+	u8			res10[0x5000];
+	u8			can3[0x1000];	/* Flexcan 3 */
+	u8			can4[0x1000];	/* Flexcan 4 */
+	u8			res11[0x1000];
+	u8			dma1[0x2000];	/* DMA */
+	sdhc83xx_t		sdhc;		/* SDHC Controller */
+	u8			res12[0xC1000];
+	rom83xx_t		rom;		/* On Chip ROM */
+	u8			res13[0x8000];
+	u8			qe[0x100000];	/* QE block */
+	u8			res14[0xE00000];/* Added for 8309 */
+} immap_t;
 #endif
 
 #define CONFIG_SYS_MPC83xx_DDR_OFFSET	(0x2000)
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 7de33a7..969f726 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -296,7 +296,9 @@
 	u32	cfg_addr;	/* PCIX Configuration Addr */
 	u32	cfg_data;	/* PCIX Configuration Data */
 	u32	int_ack;	/* PCIX IRQ Acknowledge */
-	u8	res1[3060];
+	u8	res000c[52];
+	u32	liodn_base;	/* PCIX LIODN base register */
+	u8	res0044[3004];
 	u32	potar0;		/* PCIX Outbound Transaction Addr 0 */
 	u32	potear0;	/* PCIX Outbound Translation Extended Addr 0 */
 	u32	powbar0;	/* PCIX Outbound Window Base Addr 0 */
@@ -1687,6 +1689,77 @@
 	u32	alt_pmuxcr;	/* Alt function signal multiplex control */
 	u8	res6[12];
 	u32	devdisr;	/* Device disable control */
+	u32	devdisr2;	/* Device disable control 2 */
+	u32	devdisr3;	/* Device disable control 3 */
+	u32	devdisr4;	/* Device disable control 4 */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+	u32	devdisr5;	/* Device disable control 5 */
+#define FSL_CORENET_DEVDISR_PBL	0x80000000
+#define FSL_CORENET_DEVDISR_PMAN	0x40000000
+#define FSL_CORENET_DEVDISR_ESDHC	0x20000000
+#define FSL_CORENET_DEVDISR_DMA1	0x00800000
+#define FSL_CORENET_DEVDISR_DMA2	0x00400000
+#define FSL_CORENET_DEVDISR_USB1	0x00080000
+#define FSL_CORENET_DEVDISR_USB2	0x00040000
+#define FSL_CORENET_DEVDISR_SATA1	0x00008000
+#define FSL_CORENET_DEVDISR_SATA2	0x00004000
+#define FSL_CORENET_DEVDISR_PME	0x00000800
+#define FSL_CORENET_DEVDISR_SEC	0x00000200
+#define FSL_CORENET_DEVDISR_RMU	0x00000080
+#define FSL_CORENET_DEVDISR_DCE	0x00000040
+#define FSL_CORENET_DEVDISR2_DTSEC1_1	0x80000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_2	0x40000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_3	0x20000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_4	0x10000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_5	0x08000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_6	0x04000000
+#define FSL_CORENET_DEVDISR2_DTSEC1_9	0x00800000
+#define FSL_CORENET_DEVDISR2_DTSEC1_10	0x00400000
+#define FSL_CORENET_DEVDISR2_10GEC1_1	0x00800000
+#define FSL_CORENET_DEVDISR2_10GEC1_2	0x00400000
+#define FSL_CORENET_DEVDISR2_DTSEC2_1	0x00080000
+#define FSL_CORENET_DEVDISR2_DTSEC2_2	0x00040000
+#define FSL_CORENET_DEVDISR2_DTSEC2_3	0x00020000
+#define FSL_CORENET_DEVDISR2_DTSEC2_4	0x00010000
+#define FSL_CORENET_DEVDISR2_DTSEC2_5	0x00008000
+#define FSL_CORENET_DEVDISR2_DTSEC2_6	0x00004000
+#define FSL_CORENET_DEVDISR2_DTSEC2_9	0x00000800
+#define FSL_CORENET_DEVDISR2_DTSEC2_10	0x00000400
+#define FSL_CORENET_DEVDISR2_10GEC2_1	0x00000800
+#define FSL_CORENET_DEVDISR2_10GEC2_2	0x00000400
+#define FSL_CORENET_DEVDISR2_FM1	0x00000080
+#define FSL_CORENET_DEVDISR2_FM2	0x00000040
+#define FSL_CORENET_DEVDISR2_CPRI	0x00000008
+#define FSL_CORENET_DEVDISR3_PCIE1	0x80000000
+#define FSL_CORENET_DEVDISR3_PCIE2	0x40000000
+#define FSL_CORENET_DEVDISR3_PCIE3	0x20000000
+#define FSL_CORENET_DEVDISR3_PCIE4	0x10000000
+#define FSL_CORENET_DEVDISR3_SRIO1	0x08000000
+#define FSL_CORENET_DEVDISR3_SRIO2	0x04000000
+#define FSL_CORENET_DEVDISR3_QMAN	0x00080000
+#define FSL_CORENET_DEVDISR3_BMAN	0x00040000
+#define FSL_CORENET_DEVDISR3_LA1	0x00008000
+#define FSL_CORENET_DEVDISR3_MAPLE1	0x00000800
+#define FSL_CORENET_DEVDISR3_MAPLE2	0x00000400
+#define FSL_CORENET_DEVDISR3_MAPLE3	0x00000200
+#define FSL_CORENET_DEVDISR4_I2C1	0x80000000
+#define FSL_CORENET_DEVDISR4_I2C2	0x40000000
+#define FSL_CORENET_DEVDISR4_DUART1	0x20000000
+#define FSL_CORENET_DEVDISR4_DUART2	0x10000000
+#define FSL_CORENET_DEVDISR4_ESPI	0x08000000
+#define FSL_CORENET_DEVDISR5_DDR1	0x80000000
+#define FSL_CORENET_DEVDISR5_DDR2	0x40000000
+#define FSL_CORENET_DEVDISR5_DDR3	0x20000000
+#define FSL_CORENET_DEVDISR5_CPC1	0x08000000
+#define FSL_CORENET_DEVDISR5_CPC2	0x04000000
+#define FSL_CORENET_DEVDISR5_CPC3	0x02000000
+#define FSL_CORENET_DEVDISR5_IFC	0x00800000
+#define FSL_CORENET_DEVDISR5_GPIO	0x00400000
+#define FSL_CORENET_DEVDISR5_DBG	0x00200000
+#define FSL_CORENET_DEVDISR5_NAL	0x00100000
+#define FSL_CORENET_DEVDISR5_TIMERS	0x00020000
+#define FSL_CORENET_NUM_DEVDISR		5
+#else
 #define FSL_CORENET_DEVDISR_PCIE1	0x80000000
 #define FSL_CORENET_DEVDISR_PCIE2	0x40000000
 #define FSL_CORENET_DEVDISR_PCIE3	0x20000000
@@ -1712,7 +1785,6 @@
 #define FSL_CORENET_DEVDISR_I2C2	0x00000010
 #define FSL_CORENET_DEVDISR_DUART1	0x00000002
 #define FSL_CORENET_DEVDISR_DUART2	0x00000001
-	u32	devdisr2;	/* Device disable control 2 */
 #define FSL_CORENET_DEVDISR2_PME	0x80000000
 #define FSL_CORENET_DEVDISR2_SEC	0x40000000
 #define FSL_CORENET_DEVDISR2_QMBM	0x08000000
@@ -1731,8 +1803,8 @@
 #define FSL_CORENET_DEVDISR2_DTSEC2_4	0x00001000
 #define FSL_CORENET_DEVDISR2_DTSEC2_5	0x00000800
 #define FSL_CORENET_NUM_DEVDISR		2
-	u8	res7[8];
 	u32	powmgtcsr;	/* Power management status & control */
+#endif
 	u8	res8[12];
 	u32	coredisru;	/* uppper portion for support of 64 cores */
 	u32	coredisrl;	/* lower portion for support of 64 cores */
@@ -1755,13 +1827,47 @@
 	u32	brrl;		/* Boot release */
 	u8	res17[24];
 	u32	rcwsr[16];	/* Reset control word status */
+
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT	16
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK	0x3f
+#if defined(CONFIG_PPC_T4240)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL		0xfc000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	26
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL		0x00fe0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT	17
+#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL		0x0000f800
+#define FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT	11
+#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL		0x000000f8
+#define FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT	3
+#elif defined(CONFIG_PPC_B4860)
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL	0xfe000000
+#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	25
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL	0x00ff0000
+#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT	16
+#endif
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL1	0x00800000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S1_PLL2	0x00400000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL1	0x00200000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S2_PLL2	0x00100000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL1	0x00080000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S3_PLL2	0x00040000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL1	0x00020000
+#define FSL_CORENET2_RCWSR5_SRDS_PLL_PD_S4_PLL2	0x00010000
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT	17
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK	0x1f
 #define FSL_CORENET_RCWSR4_SRDS_PRTCL		0xfc000000
 #define FSL_CORENET_RCWSR5_DDR_SYNC		0x00000080
 #define FSL_CORENET_RCWSR5_DDR_SYNC_SHIFT		 7
 #define FSL_CORENET_RCWSR5_SRDS_EN		0x00002000
+#define FSL_CORENET_RCWSR5_SRDS2_EN		0x00001000
 #define FSL_CORENET_RCWSR6_BOOT_LOC	0x0f800000
 #define FSL_CORENET_RCWSRn_SRDS_LPD_B2		0x3c000000 /* bits 162..165 */
 #define FSL_CORENET_RCWSRn_SRDS_LPD_B3		0x003c0000 /* bits 170..173 */
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
 #define FSL_CORENET_RCWSR7_MCK_TO_PLAT_RAT	0x00400000
 #define FSL_CORENET_RCWSR8_HOST_AGT_B1		0x00e00000
 #define FSL_CORENET_RCWSR8_HOST_AGT_B2		0x00100000
@@ -1784,6 +1890,24 @@
 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_MII		0x00100000
 #define FSL_CORENET_RCWSR11_EC2_FM1_DTSEC5_NONE		0x00180000
 #endif
+#if defined(CONFIG_PPC_P5040)
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_RGMII        0x00000000
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_MII          0x00800000
+#define FSL_CORENET_RCWSR11_EC1_FM1_DTSEC5_NONE         0x00c00000
+#define FSL_CORENET_RCWSR11_EC2                 0x00180000 /* bits 363..364 */
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_RGMII        0x00000000
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII          0x00100000
+#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE         0x00180000
+#endif
+#if defined(CONFIG_PPC_T4240)
+#define FSL_CORENET_RCWSR13_EC1			0x60000000 /* bits 417..418 */
+#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII	0x00000000
+#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO		0x40000000
+#define FSL_CORENET_RCWSR13_EC2			0x18000000 /* bits 419..420 */
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII	0x00000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII	0x08000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO		0x10000000
+#endif
 	u8	res18[192];
 	u32	scratchrw[4];	/* Scratch Read/Write */
 	u8	res19[240];
@@ -1880,34 +2004,38 @@
 #define rmuliodnr rio1maintliodnr
 
 typedef struct ccsr_clk {
-	u32	clkc0csr;	/* Core 0 Clock control/status */
+	u32	clkc0csr;	/* 0x000 Core 0 Clock control/status */
 	u8	res1[0x1c];
-	u32	clkc1csr;	/* Core 1 Clock control/status */
+	u32	clkc1csr;	/* 0x020 Core 1 Clock control/status */
 	u8	res2[0x1c];
-	u32	clkc2csr;	/* Core 2 Clock control/status */
+	u32	clkc2csr;	/* 0x040 Core 2 Clock control/status */
 	u8	res3[0x1c];
-	u32	clkc3csr;	/* Core 3 Clock control/status */
+	u32	clkc3csr;	/* 0x060 Core 3 Clock control/status */
 	u8	res4[0x1c];
-	u32	clkc4csr;	/* Core 4 Clock control/status */
+	u32	clkc4csr;	/* 0x080 Core 4 Clock control/status */
 	u8	res5[0x1c];
-	u32	clkc5csr;	/* Core 5 Clock control/status */
+	u32	clkc5csr;	/* 0x0a0 Core 5 Clock control/status */
 	u8	res6[0x1c];
-	u32	clkc6csr;	/* Core 6 Clock control/status */
+	u32	clkc6csr;	/* 0x0c0 Core 6 Clock control/status */
 	u8	res7[0x1c];
-	u32	clkc7csr;	/* Core 7 Clock control/status */
+	u32	clkc7csr;	/* 0x0e0 Core 7 Clock control/status */
 	u8	res8[0x71c];
-	u32	pllc1gsr;	/* Cluster PLL 1 General Status */
+	u32	pllc1gsr;	/* 0x800 Cluster PLL 1 General Status */
 	u8	res10[0x1c];
-	u32	pllc2gsr;	/* Cluster PLL 2 General Status */
+	u32	pllc2gsr;	/* 0x820 Cluster PLL 2 General Status */
 	u8	res11[0x1c];
-	u32	pllc3gsr;	/* Cluster PLL 3 General Status */
+	u32	pllc3gsr;	/* 0x840 Cluster PLL 3 General Status */
 	u8	res12[0x1c];
-	u32	pllc4gsr;	/* Cluster PLL 4 General Status */
-	u8	res13[0x39c];
-	u32	pllpgsr;	/* Platform PLL General Status */
+	u32	pllc4gsr;	/* 0x860 Cluster PLL 4 General Status */
+	u8	res13[0x1c];
+	u32	pllc5gsr;	/* 0x880 Cluster PLL 5 General Status */
 	u8	res14[0x1c];
-	u32	plldgsr;	/* DDR PLL General Status */
-	u8	res15[0x3dc];
+	u32	pllc6gsr;	/* 0x8a0 Cluster PLL 6 General Status */
+	u8	res15[0x35c];
+	u32	pllpgsr;	/* 0xc00 Platform PLL General Status */
+	u8	res16[0x1c];
+	u32	plldgsr;	/* 0xc20 DDR PLL General Status */
+	u8	res17[0x3dc];
 } ccsr_clk_t;
 
 #ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
@@ -2384,6 +2512,78 @@
 
 #define SDHCDCR_CD_INV		0x80000000 /* invert SDHC card detect */
 
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define MAX_SERDES 4
+#define SRDS_MAX_LANES 8
+#define SRDS_MAX_BANK 2
+typedef struct serdes_corenet {
+	struct {
+		u32	rstctl;	/* Reset Control Register */
+#define SRDS_RSTCTL_RST		0x80000000
+#define SRDS_RSTCTL_RSTDONE	0x40000000
+#define SRDS_RSTCTL_RSTERR	0x20000000
+#define SRDS_RSTCTL_SWRST	0x10000000
+#define SRDS_RSTCTL_SDPD	0x00000020
+		u32	pllcr0; /* PLL Control Register 0 */
+#define SRDS_PLLCR0_POFF		0x80000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK	0x70000000
+#define SRDS_PLLCR0_RFCK_SEL_100	0x00000000
+#define SRDS_PLLCR0_RFCK_SEL_125	0x10000000
+#define SRDS_PLLCR0_RFCK_SEL_156_25	0x20000000
+#define SRDS_PLLCR0_RFCK_SEL_150	0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13	0x40000000
+#define SRDS_PLLCR0_RFCK_SEL_122_88	0x50000000
+#define SRDS_PLLCR0_FRATE_SEL_MASK	0x000f0000
+#define SRDS_PLLCR0_FRATE_SEL_5		0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_3_75	0x00050000
+#define SRDS_PLLCR0_FRATE_SEL_5_15	0x00060000
+#define SRDS_PLLCR0_FRATE_SEL_4		0x00070000
+#define SRDS_PLLCR0_FRATE_SEL_3_12	0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3		0x000a0000
+		u32	pllcr1; /* PLL Control Register 1 */
+#define SRDS_PLLCR1_PLL_BWSEL	0x08000000
+		u32	res_0c;	/* 0x00c */
+		u32	pllcr3;
+		u32	pllcr4;
+		u8	res_18[0x20-0x18];
+	} bank[2];
+	u8	res_40[0x90-0x40];
+	u32	srdstcalcr;	/* 0x90 TX Calibration Control */
+	u8	res_94[0xa0-0x94];
+	u32	srdsrcalcr;	/* 0xa0 RX Calibration Control */
+	u8	res_a4[0xb0-0xa4];
+	u32	srdsgr0;	/* 0xb0 General Register 0 */
+	u8	res_b4[0xe0-0xb4];
+	u32	srdspccr0;	/* 0xe0 Protocol Converter Config 0 */
+	u32	srdspccr1;	/* 0xe4 Protocol Converter Config 1 */
+	u32	srdspccr2;	/* 0xe8 Protocol Converter Config 2 */
+	u32	srdspccr3;	/* 0xec Protocol Converter Config 3 */
+	u32	srdspccr4;	/* 0xf0 Protocol Converter Config 4 */
+	u8	res_f4[0x100-0xf4];
+	struct {
+		u32	lnpssr;	/* 0x100, 0x120, ..., 0x1e0 */
+		u8	res_104[0x120-0x104];
+	} srdslnpssr[8];
+	u8	res_200[0x800-0x200];
+	struct {
+		u32	gcr0;	/* 0x800 General Control Register 0 */
+		u32	gcr1;	/* 0x804 General Control Register 1 */
+		u32	gcr2;	/* 0x808 General Control Register 2 */
+		u32	res_80c;
+		u32	recr0;	/* 0x810 Receive Equalization Control */
+		u32	res_814;
+		u32	tecr0;	/* 0x818 Transmit Equalization Control */
+		u32	res_81c;
+		u32	ttlcr0;	/* 0x820 Transition Tracking Loop Ctrl 0 */
+		u8	res_824[0x840-0x824];
+	} lane[8];	/* Lane A, B, C, D, E, F, G, H */
+	u8	res_a00[0x1000-0xa00];	/* from 0xa00 to 0xfff */
+} serdes_corenet_t;
+
+#else /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
+
+#define SRDS_MAX_LANES		18
+#define SRDS_MAX_BANK		3
 typedef struct serdes_corenet {
 	struct {
 		u32	rstctl;	/* Reset Control Register */
@@ -2392,11 +2592,13 @@
 #define SRDS_RSTCTL_RSTERR	0x20000000
 #define SRDS_RSTCTL_SDPD	0x00000020
 		u32	pllcr0; /* PLL Control Register 0 */
-#define SRDS_PLLCR0_RFCK_SEL_MASK	0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_MASK	0x70000000
+#define SRDS_PLLCR0_PVCOCNT_EN		0x02000000
 #define SRDS_PLLCR0_RFCK_SEL_100	0x00000000
 #define SRDS_PLLCR0_RFCK_SEL_125	0x10000000
 #define SRDS_PLLCR0_RFCK_SEL_156_25	0x20000000
 #define SRDS_PLLCR0_RFCK_SEL_150	0x30000000
+#define SRDS_PLLCR0_RFCK_SEL_161_13	0x40000000
 #define SRDS_PLLCR0_FRATE_SEL_MASK	0x00030000
 #define SRDS_PLLCR0_FRATE_SEL_5		0x00000000
 #define SRDS_PLLCR0_FRATE_SEL_6_25	0x00010000
@@ -2421,6 +2623,7 @@
 		u32	gcr0;	/* General Control Register 0 */
 #define SRDS_GCR0_RRST			0x00400000
 #define SRDS_GCR0_1STLANE		0x00010000
+#define SRDS_GCR0_UOTHL			0x00100000
 		u32	gcr1;	/* General Control Register 1 */
 #define SRDS_GCR1_REIDL_CTL_MASK	0x001f0000
 #define SRDS_GCR1_REIDL_CTL_PCIE	0x00100000
@@ -2440,6 +2643,7 @@
 	} lane[24];
 	u32 res6[384];
 } serdes_corenet_t;
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 
 enum {
 	FSL_SRDS_B1_LANE_A = 0,
@@ -2482,8 +2686,8 @@
 	struct {
 		u32	ms;	/* DECO LIODN Register, MS */
 		u32	ls;	/* DECO LIODN Register, LS */
-	} decoliodnr[5];
-	u8	res4[0x58];
+	} decoliodnr[8];
+	u8	res4[0x40];
 	u32	dar;		/* DECO Avail Register */
 	u32	drr;		/* DECO Reset Register */
 	u8	res5[0xe78];
@@ -2523,13 +2727,16 @@
 #endif
 
 typedef struct ccsr_qman {
+#ifdef CONFIG_SYS_FSL_QMAN_V3
+	u8	res0[0x200];
+#else
 	struct {
 		u32	qcsp_lio_cfg;	/* 0x0 - SW Portal n LIO cfg */
 		u32	qcsp_io_cfg;	/* 0x4 - SW Portal n IO cfg */
 		u32	res;
 		u32	qcsp_dd_cfg;	/* 0xc - SW Portal n Dynamic Debug cfg */
 	} qcsp[32];
-
+#endif
 	/* Not actually reserved, but irrelevant to u-boot */
 	u8	res[0xbf8 - 0x200];
 	u32	ip_rev_1;
@@ -2554,6 +2761,14 @@
 	u32	ci_rlm_cfg;	/* Initiator Read Latency Monitor Cfg */
 	u32	ci_rlm_avg;	/* Initiator Read Latency Monitor Avg */
 	u8	res7[0x2e8];
+#ifdef CONFIG_SYS_FSL_QMAN_V3
+	struct {
+		u32	qcsp_lio_cfg;	/* 0x0 - SW Portal n LIO cfg */
+		u32	qcsp_io_cfg;	/* 0x4 - SW Portal n IO cfg */
+		u32	res;
+		u32	qcsp_dd_cfg;	/* 0xc - SW Portal n Dynamic Debug cfg*/
+	} qcsp[50];
+#endif
 } ccsr_qman_t;
 
 typedef struct ccsr_bman {
@@ -2617,14 +2832,48 @@
 };
 #endif
 
+#ifdef CONFIG_SYS_PMAN
+struct ccsr_pman {
+	u8	res_00[0x40];
+	u32	poes1;		/* PMAN Operation Error Status Register 1 */
+	u32	poes2;		/* PMAN Operation Error Status Register 2 */
+	u32	poeah;		/* PMAN Operation Error Address High */
+	u32	poeal;		/* PMAN Operation Error Address Low */
+	u8	res_50[0x50];
+	u32	pr1;		/* PMAN Revision Register 1 */
+	u32	pr2;		/* PMAN Revision Register 2 */
+	u8	res_a8[0x8];
+	u32	pcap;		/* PMAN Capabilities Register */
+	u8	res_b4[0xc];
+	u32	pc1;		/* PMAN Control Register 1 */
+	u32	pc2;		/* PMAN Control Register 2 */
+	u32	pc3;		/* PMAN Control Register 3 */
+	u32	pc4;		/* PMAN Control Register 4 */
+	u32	pc5;		/* PMAN Control Register 5 */
+	u32	pc6;		/* PMAN Control Register 6 */
+	u8	res_d8[0x8];
+	u32	ppa1;		/* PMAN Prefetch Attributes Register 1 */
+	u32	ppa2;		/* PMAN Prefetch Attributes Register 2 */
+	u8	res_e8[0x8];
+	u32	pics;		/* PMAN Interrupt Control and Status */
+	u8	res_f4[0xf0c];
+};
+#endif
+
 #ifdef CONFIG_FSL_CORENET
 #define CONFIG_SYS_FSL_CORENET_CCM_OFFSET	0x0000
+#ifdef CONFIG_SYS_PMAN
+#define CONFIG_SYS_FSL_CORENET_PMAN1_OFFSET	0x4000
+#define CONFIG_SYS_FSL_CORENET_PMAN2_OFFSET	0x5000
+#define CONFIG_SYS_FSL_CORENET_PMAN3_OFFSET	0x6000
+#endif
 #define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x8000
 #define CONFIG_SYS_MPC85xx_DDR2_OFFSET		0x9000
 #define CONFIG_SYS_MPC85xx_DDR3_OFFSET		0xA000
 #define CONFIG_SYS_FSL_CORENET_CLK_OFFSET	0xE1000
 #define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET	0xE2000
 #define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET	0xEA000
+#define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET	0xEB000
 #define CONFIG_SYS_FSL_CPC_OFFSET		0x10000
 #define CONFIG_SYS_MPC85xx_DMA1_OFFSET		0x100000
 #define CONFIG_SYS_MPC85xx_DMA2_OFFSET		0x101000
@@ -2635,10 +2884,17 @@
 #define CONFIG_SYS_MPC85xx_IFC_OFFSET		0x124000
 #define CONFIG_SYS_MPC85xx_GPIO_OFFSET		0x130000
 #define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET	0x1e0000
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define CONFIG_SYS_MPC85xx_PCIE1_OFFSET		0x240000
+#define CONFIG_SYS_MPC85xx_PCIE2_OFFSET		0x250000
+#define CONFIG_SYS_MPC85xx_PCIE3_OFFSET		0x260000
+#define CONFIG_SYS_MPC85xx_PCIE4_OFFSET		0x270000
+#else
 #define CONFIG_SYS_MPC85xx_PCIE1_OFFSET		0x200000
 #define CONFIG_SYS_MPC85xx_PCIE2_OFFSET		0x201000
 #define CONFIG_SYS_MPC85xx_PCIE3_OFFSET		0x202000
 #define CONFIG_SYS_MPC85xx_PCIE4_OFFSET		0x203000
+#endif
 #define CONFIG_SYS_MPC85xx_USB1_OFFSET		0x210000
 #define CONFIG_SYS_MPC85xx_USB2_OFFSET		0x211000
 #define CONFIG_SYS_MPC85xx_USB_OFFSET		CONFIG_SYS_MPC85xx_USB1_OFFSET
@@ -2657,7 +2913,9 @@
 #define CONFIG_SYS_FSL_FM1_RX2_1G_OFFSET	0x48a000
 #define CONFIG_SYS_FSL_FM1_RX3_1G_OFFSET	0x48b000
 #define CONFIG_SYS_FSL_FM1_RX4_1G_OFFSET	0x48c000
+#define CONFIG_SYS_FSL_FM1_RX5_1G_OFFSET	0x48d000
 #define CONFIG_SYS_FSL_FM1_RX0_10G_OFFSET	0x490000
+#define CONFIG_SYS_FSL_FM1_RX1_10G_OFFSET	0x491000
 #define CONFIG_SYS_FSL_FM1_DTSEC1_OFFSET	0x4e0000
 #define CONFIG_SYS_FSL_FM2_OFFSET		0x500000
 #define CONFIG_SYS_FSL_FM2_RX0_1G_OFFSET	0x588000
@@ -2665,7 +2923,10 @@
 #define CONFIG_SYS_FSL_FM2_RX2_1G_OFFSET	0x58a000
 #define CONFIG_SYS_FSL_FM2_RX3_1G_OFFSET	0x58b000
 #define CONFIG_SYS_FSL_FM2_RX4_1G_OFFSET	0x58c000
+#define CONFIG_SYS_FSL_FM2_RX5_1G_OFFSET	0x58d000
 #define CONFIG_SYS_FSL_FM2_RX0_10G_OFFSET	0x590000
+#define CONFIG_SYS_FSL_FM2_RX1_10G_OFFSET	0x591000
+#define CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET	0xC20000
 #else
 #define CONFIG_SYS_MPC85xx_ECM_OFFSET		0x0000
 #define CONFIG_SYS_MPC85xx_DDR_OFFSET		0x2000
@@ -2775,6 +3036,8 @@
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SERDES2_OFFSET)
 #define CONFIG_SYS_FSL_CORENET_SERDES_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
+#define CONFIG_SYS_FSL_CORENET_SERDES2_ADDR \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET)
 #define CONFIG_SYS_MPC85xx_USB_ADDR \
 	(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
 #define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \
@@ -2808,4 +3071,62 @@
 #define TSEC_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
 #define MDIO_BASE_ADDR		(CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
 
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+struct ccsr_cluster_l2 {
+	u32 l2csr0;	/* 0x000 L2 cache control and status register 0 */
+	u32 l2csr1;	/* 0x004 L2 cache control and status register 1 */
+	u32 l2cfg0;	/* 0x008 L2 cache configuration register 0 */
+	u8  res_0c[500];/* 0x00c - 0x1ff */
+	u32 l2pir0;	/* 0x200 L2 cache partitioning ID register 0 */
+	u8  res_204[4];
+	u32 l2par0;	/* 0x208 L2 cache partitioning allocation register 0 */
+	u32 l2pwr0;	/* 0x20c L2 cache partitioning way register 0 */
+	u32 l2pir1;	/* 0x210 L2 cache partitioning ID register 1 */
+	u8  res_214[4];
+	u32 l2par1;	/* 0x218 L2 cache partitioning allocation register 1 */
+	u32 l2pwr1;	/* 0x21c L2 cache partitioning way register 1 */
+	u32 u2pir2;	/* 0x220 L2 cache partitioning ID register 2 */
+	u8  res_224[4];
+	u32 l2par2;	/* 0x228 L2 cache partitioning allocation register 2 */
+	u32 l2pwr2;	/* 0x22c L2 cache partitioning way register 2 */
+	u32 l2pir3;	/* 0x230 L2 cache partitioning ID register 3 */
+	u8  res_234[4];
+	u32 l2par3;	/* 0x238 L2 cache partitining allocation register 3 */
+	u32 l2pwr3;	/* 0x23c L2 cache partitining way register 3 */
+	u32 l2pir4;	/* 0x240 L2 cache partitioning ID register 3 */
+	u8  res244[4];
+	u32 l2par4;	/* 0x248 L2 cache partitioning allocation register 3 */
+	u32 l2pwr4;	/* 0x24c L2 cache partitioning way register 3 */
+	u32 l2pir5;	/* 0x250 L2 cache partitioning ID register 3 */
+	u8  res_254[4];
+	u32 l2par5;	/* 0x258 L2 cache partitioning allocation register 3 */
+	u32 l2pwr5;	/* 0x25c L2 cache partitioning way register 3 */
+	u32 l2pir6;	/* 0x260 L2 cache partitioning ID register 3 */
+	u8  res_264[4];
+	u32 l2par6;	/* 0x268 L2 cache partitioning allocation register 3 */
+	u32 l2pwr6;	/* 0x26c L2 cache partitioning way register 3 */
+	u32 l2pir7;	/* 0x270 L2 cache partitioning ID register 3 */
+	u8  res274[4];
+	u32 l2par7;	/* 0x278 L2 cache partitioning allocation register 3 */
+	u32 l2pwr7;	/* 0x27c L2 cache partitioning way register 3 */
+	u8  res_280[0xb80]; /* 0x280 - 0xdff */
+	u32 l2errinjhi;	/* 0xe00 L2 cache error injection mask high */
+	u32 l2errinjlo;	/* 0xe04 L2 cache error injection mask low */
+	u32 l2errinjctl;/* 0xe08 L2 cache error injection control */
+	u8  res_e0c[20];	/* 0xe0c - 0x01f */
+	u32 l2captdatahi; /* 0xe20 L2 cache error capture data high */
+	u32 l2captdatalo; /* 0xe24 L2 cache error capture data low */
+	u32 l2captecc;	/* 0xe28 L2 cache error capture ECC syndrome */
+	u8  res_e2c[20];	/* 0xe2c - 0xe3f */
+	u32 l2errdet;	/* 0xe40 L2 cache error detect */
+	u32 l2errdis;	/* 0xe44 L2 cache error disable */
+	u32 l2errinten;	/* 0xe48 L2 cache error interrupt enable */
+	u32 l2errattr;	/* 0xe4c L2 cache error attribute */
+	u32 l2erreaddr;	/* 0xe50 L2 cache error extended address */
+	u32 l2erraddr;	/* 0xe54 L2 cache error address */
+	u32 l2errctl;	/* 0xe58 L2 cache error control */
+};
+#define CONFIG_SYS_FSL_CLUSTER_1_L2 \
+	(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CLUSTER_1_L2_OFFSET)
+#endif /* CONFIG_SYS_FSL_QORIQ_CHASSIS2 */
 #endif /*__IMMAP_85xx__*/
diff --git a/arch/powerpc/include/asm/immap_qe.h b/arch/powerpc/include/asm/immap_qe.h
index 9be9dca..f0b989a 100644
--- a/arch/powerpc/include/asm/immap_qe.h
+++ b/arch/powerpc/include/asm/immap_qe.h
@@ -20,7 +20,7 @@
 #define QE_MURAM_SIZE		0xc000UL
 #define MAX_QE_RISC		2
 #define QE_NUM_OF_SNUM		28
-#elif defined(CONFIG_MPC832x)
+#elif defined(CONFIG_MPC832x) || defined(CONFIG_MPC8309)
 #define QE_MURAM_SIZE		0x4000UL
 #define MAX_QE_RISC		1
 #define QE_NUM_OF_SNUM		28
diff --git a/arch/powerpc/include/asm/io.h b/arch/powerpc/include/asm/io.h
index 9e20861..1f12c29 100644
--- a/arch/powerpc/include/asm/io.h
+++ b/arch/powerpc/include/asm/io.h
@@ -127,7 +127,6 @@
 /*
  * Non ordered and non-swapping "raw" accessors
  */
-#define __iomem
 #define PCI_FIX_ADDR(addr)	(addr)
 
 static inline unsigned char __raw_readb(const volatile void __iomem *addr)
diff --git a/arch/powerpc/include/asm/mp.h b/arch/powerpc/include/asm/mp.h
index fe490ba..9188ede 100644
--- a/arch/powerpc/include/asm/mp.h
+++ b/arch/powerpc/include/asm/mp.h
@@ -25,7 +25,7 @@
 
 void setup_mp(void);
 void cpu_mp_lmb_reserve(struct lmb *lmb);
-u32 determine_mp_bootpg(void);
+u32 determine_mp_bootpg(unsigned int *pagesize);
 int is_core_disabled(int nr);
 
 #ifdef CONFIG_E6500
diff --git a/arch/powerpc/include/asm/mpc85xx_gpio.h b/arch/powerpc/include/asm/mpc85xx_gpio.h
index 5a608a5..2aed514 100644
--- a/arch/powerpc/include/asm/mpc85xx_gpio.h
+++ b/arch/powerpc/include/asm/mpc85xx_gpio.h
@@ -98,7 +98,10 @@
 
 static inline int gpio_direction_output(unsigned gpio, int value)
 {
-	mpc85xx_gpio_set_low(1U << gpio);
+	if (value)
+		mpc85xx_gpio_set_high(1U << gpio);
+	else
+		mpc85xx_gpio_set_low(1U << gpio);
 	return 0;
 }
 
diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h
index d570d79..e35d9b6 100644
--- a/arch/powerpc/include/asm/ppc4xx-sdram.h
+++ b/arch/powerpc/include/asm/ppc4xx-sdram.h
@@ -1404,7 +1404,7 @@
 /*
  * Prototypes
  */
-inline void ppc4xx_ibm_ddr2_register_dump(void);
+void ppc4xx_ibm_ddr2_register_dump(void);
 u32 mfdcr_any(u32);
 void mtdcr_any(u32, u32);
 u32 ddr_wrdtr(u32);
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 36695e2..7aa3231 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -1095,6 +1095,17 @@
 #define SVR_P4080	0x820000
 #define SVR_P5010	0x822100
 #define SVR_P5020	0x822000
+#define SVR_P5021	0X820500
+#define SVR_P5040	0x820400
+#define SVR_T4240	0x824000
+#define SVR_T4120	0x824001
+#define SVR_B4860	0X868000
+#define SVR_G4860	0x868001
+#define SVR_G4060	0x868003
+#define SVR_B4440	0x868100
+#define SVR_G4440	0x868101
+#define SVR_B4420	0x868102
+#define SVR_B4220	0x868103
 
 #define SVR_8610	0x80A000
 #define SVR_8641	0x809000
diff --git a/arch/powerpc/include/asm/u-boot.h b/arch/powerpc/include/asm/u-boot.h
index b2fa2b5..7229a98 100644
--- a/arch/powerpc/include/asm/u-boot.h
+++ b/arch/powerpc/include/asm/u-boot.h
@@ -81,7 +81,7 @@
 	unsigned long	bi_ipbfreq;	/* IPB Bus Freq, in MHz */
 	unsigned long	bi_pcifreq;	/* PCI Bus Freq, in MHz */
 #endif
-	unsigned long	bi_baudrate;	/* Console Baudrate */
+	unsigned int	bi_baudrate;	/* Console Baudrate */
 #if defined(CONFIG_405)   || \
     defined(CONFIG_405GP) || \
     defined(CONFIG_405CR) || \
diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile
index 965f9ea..808021c 100644
--- a/arch/powerpc/lib/Makefile
+++ b/arch/powerpc/lib/Makefile
@@ -50,6 +50,7 @@
 COBJS-y	+= extable.o
 COBJS-y	+= interrupts.o
 COBJS-$(CONFIG_CMD_KGDB) += kgdb.o
+COBJS-${CONFIG_CMD_IDE} += ide.o
 COBJS-y	+= time.o
 
 # Workaround for local bus unaligned access problems
diff --git a/arch/powerpc/lib/board.c b/arch/powerpc/lib/board.c
index b860141..1b051e1 100644
--- a/arch/powerpc/lib/board.c
+++ b/arch/powerpc/lib/board.c
@@ -163,7 +163,7 @@
 
 /***********************************************************************/
 
-void __board_add_ram_info(int use_default)
+static void __board_add_ram_info(int use_default)
 {
 	/* please define platform specific board_add_ram_info() */
 }
@@ -171,7 +171,7 @@
 void board_add_ram_info(int)
 	__attribute__ ((weak, alias("__board_add_ram_info")));
 
-int __board_flash_wp_on(void)
+static int __board_flash_wp_on(void)
 {
 	/*
 	 * Most flashes can't be detected when write protection is enabled,
@@ -184,7 +184,7 @@
 int board_flash_wp_on(void)
 	__attribute__ ((weak, alias("__board_flash_wp_on")));
 
-void __cpu_secondary_init_r(void)
+static void __cpu_secondary_init_r(void)
 {
 }
 
@@ -262,7 +262,7 @@
  * Initialization sequence
  */
 
-init_fnc_t *init_sequence[] = {
+static init_fnc_t *init_sequence[] = {
 #if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)
 	probecpu,
 #endif
@@ -345,7 +345,7 @@
 #endif
 }
 
-int __fixup_cpu(void)
+static int __fixup_cpu(void)
 {
 	return 0;
 }
@@ -402,7 +402,7 @@
 
 #ifdef CONFIG_POST
 	post_bootmode_init();
-	post_run(NULL, POST_ROM | post_bootmode_get(0));
+	post_run(NULL, POST_ROM | post_bootmode_get(NULL));
 #endif
 
 	WATCHDOG_RESET();
@@ -440,8 +440,8 @@
 	 * We need to make sure the location we intend to put secondary core
 	 * boot code is reserved and not used by any part of u-boot
 	 */
-	if (addr > determine_mp_bootpg()) {
-		addr = determine_mp_bootpg();
+	if (addr > determine_mp_bootpg(NULL)) {
+		addr = determine_mp_bootpg(NULL);
 		debug("Reserving MP boot page to %08lx\n", addr);
 	}
 #endif
diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c
index 53dc4df..ac5bd6d 100644
--- a/arch/powerpc/lib/bootm.c
+++ b/arch/powerpc/lib/bootm.c
@@ -326,7 +326,7 @@
 	return 0;
 }
 
-__attribute__((noinline))
+noinline
 int do_bootm_linux(int flag, int argc, char * const argv[], bootm_headers_t *images)
 {
 	int	ret;
diff --git a/arch/powerpc/lib/extable.c b/arch/powerpc/lib/extable.c
index 7408d5c..60983ae 100644
--- a/arch/powerpc/lib/extable.c
+++ b/arch/powerpc/lib/extable.c
@@ -63,8 +63,6 @@
 	return 0;
 }
 
-int	ex_tab_message = 1;
-
 unsigned long
 search_exception_table(unsigned long addr)
 {
@@ -74,8 +72,7 @@
 	ret = search_one_table(__start___ex_table, __stop___ex_table-1, addr);
 	/* if the serial port does not hang in exception, printf can be used */
 #if !defined(CONFIG_SYS_SERIAL_HANG_IN_EXCEPTION)
-	if (ex_tab_message)
-		debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
+	debug("Bus Fault @ 0x%08lx, fixup 0x%08lx\n", addr, ret);
 #endif
 	if (ret) return ret;
 
diff --git a/arch/powerpc/lib/ide.c b/arch/powerpc/lib/ide.c
new file mode 100644
index 0000000..139a94a
--- /dev/null
+++ b/arch/powerpc/lib/ide.c
@@ -0,0 +1,201 @@
+/*
+ * (C) Copyright 2000-2011
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+/* Code taken from cmd_ide.c */
+#include <common.h>
+#include <ata.h>
+#include "ide.h"
+
+#ifdef CONFIG_IDE_8xx_DIRECT
+#include <mpc8xx.h>
+#include <pcmcia.h>
+DECLARE_GLOBAL_DATA_PTR;
+
+/* Timings for IDE Interface
+ *
+ * SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk
+ * 70	   165	    30	   PIO-Mode 0, [ns]
+ *  4	     9	     2		       [Cycles]
+ * 50	   125	    20	   PIO-Mode 1, [ns]
+ *  3	     7	     2		       [Cycles]
+ * 30	   100	    15	   PIO-Mode 2, [ns]
+ *  2	     6	     1		       [Cycles]
+ * 30	    80	    10	   PIO-Mode 3, [ns]
+ *  2	     5	     1		       [Cycles]
+ * 25	    70	    10	   PIO-Mode 4, [ns]
+ *  2	     4	     1		       [Cycles]
+ */
+
+static const pio_config_t pio_config_ns[IDE_MAX_PIO_MODE+1] = {
+    /*  Setup  Length  Hold  */
+	{ 70,	165,	30 },		/* PIO-Mode 0, [ns]	*/
+	{ 50,	125,	20 },		/* PIO-Mode 1, [ns]	*/
+	{ 30,	101,	15 },		/* PIO-Mode 2, [ns]	*/
+	{ 30,	 80,	10 },		/* PIO-Mode 3, [ns]	*/
+	{ 25,	 70,	10 },		/* PIO-Mode 4, [ns]	*/
+};
+
+static pio_config_t pio_config_clk[IDE_MAX_PIO_MODE+1];
+
+#ifndef CONFIG_SYS_PIO_MODE
+#define CONFIG_SYS_PIO_MODE	0	/* use a relaxed default */
+#endif
+static int pio_mode = CONFIG_SYS_PIO_MODE;
+
+/* Make clock cycles and always round up */
+
+#define PCMCIA_MK_CLKS(t, T) (((t) * (T) + 999U) / 1000U)
+
+static void set_pcmcia_timing(int pmode)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
+	ulong timings;
+
+	debug("Set timing for PIO Mode %d\n", pmode);
+
+	timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold)
+		| PCMCIA_SST(pio_config_clk[pmode].t_setup)
+		| PCMCIA_SL(pio_config_clk[pmode].t_length);
+
+	/*
+	 * IDE 0
+	 */
+	pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0;
+#if (CONFIG_SYS_PCMCIA_POR0 != 0)
+	pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0 | timings;
+#else
+	pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0;
+#endif
+	debug("PBR0: %08x  POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0);
+
+	pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1;
+#if (CONFIG_SYS_PCMCIA_POR1 != 0)
+	pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1 | timings;
+#else
+	pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1;
+#endif
+	debug("PBR1: %08x  POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1);
+
+	pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2;
+#if (CONFIG_SYS_PCMCIA_POR2 != 0)
+	pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2 | timings;
+#else
+	pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2;
+#endif
+	debug("PBR2: %08x  POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2);
+
+	pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3;
+#if (CONFIG_SYS_PCMCIA_POR3 != 0)
+	pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3 | timings;
+#else
+	pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3;
+#endif
+	debug("PBR3: %08x  POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3);
+
+	/*
+	 * IDE 1
+	 */
+	pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4;
+#if (CONFIG_SYS_PCMCIA_POR4 != 0)
+	pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4 | timings;
+#else
+	pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4;
+#endif
+	debug("PBR4: %08x  POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4);
+
+	pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5;
+#if (CONFIG_SYS_PCMCIA_POR5 != 0)
+	pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5 | timings;
+#else
+	pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5;
+#endif
+	debug("PBR5: %08x  POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5);
+
+	pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6;
+#if (CONFIG_SYS_PCMCIA_POR6 != 0)
+	pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6 | timings;
+#else
+	pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6;
+#endif
+	debug("PBR6: %08x  POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6);
+
+	pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7;
+#if (CONFIG_SYS_PCMCIA_POR7 != 0)
+	pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7 | timings;
+#else
+	pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7;
+#endif
+	debug("PBR7: %08x  POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7);
+
+}
+
+int ide_preinit(void)
+{
+	int i;
+	/* Initialize PIO timing tables */
+	for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) {
+		pio_config_clk[i].t_setup =
+			PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk);
+		pio_config_clk[i].t_length =
+			PCMCIA_MK_CLKS(pio_config_ns[i].t_length, gd->bus_clk);
+		pio_config_clk[i].t_hold =
+			PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk);
+		debug("PIO Mode %d: setup=%2d ns/%d clk" "  len=%3d ns/%d clk"
+			"  hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup,
+			pio_config_clk[i].t_setup, pio_config_ns[i].t_length,
+			pio_config_clk[i].t_length, pio_config_ns[i].t_hold,
+			pio_config_clk[i].t_hold);
+	}
+
+	return 0;
+}
+
+int ide_init_postreset(void)
+{
+	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
+
+	/* PCMCIA / IDE initialization for common mem space */
+	pcmp->pcmc_pgcrb = 0;
+
+	/* start in PIO mode 0 - most relaxed timings */
+	pio_mode = 0;
+	set_pcmcia_timing(pio_mode);
+	return 0;
+}
+#endif /* CONFIG_IDE_8xx_DIRECT */
+
+#ifdef CONFIG_IDE_8xx_PCCARD
+int ide_preinit(void)
+{
+	ide_devices_found = 0;
+	/* initialize the PCMCIA IDE adapter card */
+	pcmcia_on();
+	if (!ide_devices_found)
+		return 1;
+	udelay(1000000);/* 1 s */
+	return 0;
+}
+#endif
diff --git a/arch/arm/include/asm/arch-lpc2292/hardware.h b/arch/powerpc/lib/ide.h
similarity index 71%
rename from arch/arm/include/asm/arch-lpc2292/hardware.h
rename to arch/powerpc/lib/ide.h
index 5e227e3..9e80702 100644
--- a/arch/arm/include/asm/arch-lpc2292/hardware.h
+++ b/arch/powerpc/lib/ide.h
@@ -1,9 +1,6 @@
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
 /*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
+ * (C) Copyright 2012
+ * Pavel Herrmann <morpheus.ibis@gmail.com>
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -24,10 +21,11 @@
  * MA 02111-1307 USA
  */
 
-#if defined(CONFIG_LPC2292)
-#include <asm/arch-lpc2292/lpc2292_registers.h>
-#else
-#error No hardware file defined for this configuration
-#endif
+#ifndef _MPC8XX_IDE_H_
+#define _MPC8XX_IDE_H_ 1
 
-#endif /* __ASM_ARCH_HARDWARE_H */
+#ifdef CONFIG_IDE_8xx_PCCARD
+int pcmcia_on(void);
+extern int ide_devices_found;
+#endif
+#endif
diff --git a/arch/sandbox/cpu/u-boot.lds b/arch/sandbox/cpu/u-boot.lds
index 9960138..1b781eb 100644
--- a/arch/sandbox/cpu/u-boot.lds
+++ b/arch/sandbox/cpu/u-boot.lds
@@ -24,9 +24,11 @@
 
 SECTIONS
 {
-	__u_boot_cmd_start = .;
-	_u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	__u_boot_sandbox_option_start = .;
 	_u_boot_sandbox_getopt : { *(.u_boot_sandbox_getopt) }
diff --git a/arch/sandbox/include/asm/global_data.h b/arch/sandbox/include/asm/global_data.h
index 581fd2f..78a751d 100644
--- a/arch/sandbox/include/asm/global_data.h
+++ b/arch/sandbox/include/asm/global_data.h
@@ -36,7 +36,7 @@
 typedef	struct global_data {
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	have_console;	/* serial_init() was called */
 	unsigned long	env_addr;	/* Address  of Environment struct */
 	unsigned long	env_valid;	/* Checksum of Environment valid? */
diff --git a/arch/sh/cpu/sh2/u-boot.lds b/arch/sh/cpu/sh2/u-boot.lds
index b86a822..17f8091 100644
--- a/arch/sh/cpu/sh2/u-boot.lds
+++ b/arch/sh/cpu/sh2/u-boot.lds
@@ -72,13 +72,10 @@
 	}
 	PROVIDE (_egot = .);
 
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
+
+	.u_boot_list : {
+		#include <u-boot.lst>
 	}
-	PROVIDE (__u_boot_cmd_end = .);
 
 	PROVIDE (reloc_dst_end = .);
 
diff --git a/arch/sh/cpu/sh3/u-boot.lds b/arch/sh/cpu/sh3/u-boot.lds
index 9bf8503..c831961 100644
--- a/arch/sh/cpu/sh3/u-boot.lds
+++ b/arch/sh/cpu/sh3/u-boot.lds
@@ -78,13 +78,10 @@
 	}
 	PROVIDE (_egot = .);
 
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
+
+	.u_boot_list : {
+		#include <u-boot.lst>
 	}
-	PROVIDE (__u_boot_cmd_end = .);
 
 	PROVIDE (reloc_dst_end = .);
 	/* _reloc_dst_end = .; */
diff --git a/arch/sh/cpu/sh4/u-boot.lds b/arch/sh/cpu/sh4/u-boot.lds
index d9c70bc..0ecafcf 100644
--- a/arch/sh/cpu/sh4/u-boot.lds
+++ b/arch/sh/cpu/sh4/u-boot.lds
@@ -75,13 +75,10 @@
 	}
 	PROVIDE (_egot = .);
 
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
+
+	.u_boot_list : {
+		#include <u-boot.lst>
 	}
-	PROVIDE (__u_boot_cmd_end = .);
 
 	PROVIDE (reloc_dst_end = .);
 	/* _reloc_dst_end = .; */
diff --git a/arch/sh/include/asm/global_data.h b/arch/sh/include/asm/global_data.h
index 6e534ad..9a2c193 100644
--- a/arch/sh/include/asm/global_data.h
+++ b/arch/sh/include/asm/global_data.h
@@ -31,7 +31,7 @@
 {
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	cpu_clk;	/* CPU clock in Hz! */
 	unsigned long	have_console;	/* serial_init() was called */
 #ifdef CONFIG_PRE_CONSOLE_BUFFER
diff --git a/arch/sh/include/asm/u-boot.h b/arch/sh/include/asm/u-boot.h
index 6c04daf..2c9c463 100644
--- a/arch/sh/include/asm/u-boot.h
+++ b/arch/sh/include/asm/u-boot.h
@@ -33,7 +33,7 @@
 	unsigned long   bi_flashoffset; /* reserved area for startup monitor */
 	unsigned long   bi_sramstart;   /* start of SRAM memory */
 	unsigned long   bi_sramsize;    /* size  of SRAM memory */
-	unsigned long   bi_baudrate;    /* Console Baudrate */
+	unsigned int    bi_baudrate;    /* Console Baudrate */
 	unsigned long	bi_boot_params; /* where this board expects params */
 } bd_t;
 
diff --git a/arch/sparc/cpu/leon2/serial.c b/arch/sparc/cpu/leon2/serial.c
index 16fffb6..40d5b01 100644
--- a/arch/sparc/cpu/leon2/serial.c
+++ b/arch/sparc/cpu/leon2/serial.c
@@ -105,13 +105,6 @@
 	leon2_serial_putc_raw(c);
 }
 
-static void leon2_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s++);
-	}
-}
-
 static int leon2_serial_getc(void)
 {
 	LEON2_regs *leon2 = (LEON2_regs *) LEON2_PREGS;
@@ -172,7 +165,7 @@
 	.stop	= NULL,
 	.setbrg	= leon2_serial_setbrg,
 	.putc	= leon2_serial_putc,
-	.puts	= leon2_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= leon2_serial_getc,
 	.tstc	= leon2_serial_tstc,
 };
diff --git a/arch/sparc/cpu/leon3/serial.c b/arch/sparc/cpu/leon3/serial.c
index c4f3ee8..838d451 100644
--- a/arch/sparc/cpu/leon3/serial.c
+++ b/arch/sparc/cpu/leon3/serial.c
@@ -99,13 +99,6 @@
 	leon3_serial_putc_raw(c);
 }
 
-static void leon3_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s++);
-	}
-}
-
 static int leon3_serial_getc(void)
 {
 	if (!leon3_apbuart)
@@ -146,7 +139,7 @@
 	.stop	= NULL,
 	.setbrg	= leon3_serial_setbrg,
 	.putc	= leon3_serial_putc,
-	.puts	= leon3_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= leon3_serial_getc,
 	.tstc	= leon3_serial_tstc,
 };
diff --git a/arch/sparc/include/asm/global_data.h b/arch/sparc/include/asm/global_data.h
index 93d3cc0..aa63b35 100644
--- a/arch/sparc/include/asm/global_data.h
+++ b/arch/sparc/include/asm/global_data.h
@@ -40,7 +40,7 @@
 typedef struct global_data {
 	bd_t *bd;
 	unsigned long flags;
-	unsigned long baudrate;
+	unsigned int baudrate;
 	unsigned long cpu_clk;	/* CPU clock in Hz!             */
 	unsigned long bus_clk;
 
diff --git a/arch/sparc/include/asm/u-boot.h b/arch/sparc/include/asm/u-boot.h
index 8d01118..04c05d4 100644
--- a/arch/sparc/include/asm/u-boot.h
+++ b/arch/sparc/include/asm/u-boot.h
@@ -54,7 +54,7 @@
 	unsigned short bi_ethspeed;	/* Ethernet speed in Mbps */
 	unsigned long bi_intfreq;	/* Internal Freq, in MHz */
 	unsigned long bi_busfreq;	/* Bus Freq, in MHz */
-	unsigned long bi_baudrate;	/* Console Baudrate */
+	unsigned int bi_baudrate;	/* Console Baudrate */
 } bd_t;
 
 #endif				/* __ASSEMBLY__ */
diff --git a/arch/sparc/lib/board.c b/arch/sparc/lib/board.c
index ff0e0f2..32d025a 100644
--- a/arch/sparc/lib/board.c
+++ b/arch/sparc/lib/board.c
@@ -246,8 +246,8 @@
 	/*
 	 * We have to relocate the command table manually
 	 */
-	fixup_cmdtable(&__u_boot_cmd_start,
-		(ulong)(&__u_boot_cmd_end - &__u_boot_cmd_start));
+	fixup_cmdtable(ll_entry_start(cmd_tbl_t, cmd),
+			ll_entry_count(cmd_tbl_t, cmd));
 #endif /* defined(CONFIG_NEEDS_MANUAL_RELOC) */
 
 #if defined(CONFIG_CMD_AMBAPP) && defined(CONFIG_SYS_AMBAPP_PRINT_ON_STARTUP)
diff --git a/arch/x86/cpu/u-boot.lds b/arch/x86/cpu/u-boot.lds
index fe28030..a1ecefa 100644
--- a/arch/x86/cpu/u-boot.lds
+++ b/arch/x86/cpu/u-boot.lds
@@ -33,10 +33,11 @@
 	.text  : { *(.text*); }
 
 	. = ALIGN(4);
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+
 	. = ALIGN(4);
-	__u_boot_cmd_end = .;
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 	.rodata : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
diff --git a/arch/x86/include/asm/global_data.h b/arch/x86/include/asm/global_data.h
index 6d29c0b..bce999f 100644
--- a/arch/x86/include/asm/global_data.h
+++ b/arch/x86/include/asm/global_data.h
@@ -38,7 +38,7 @@
 	unsigned long	gd_addr;	/* Location of Global Data */
 	bd_t		*bd;
 	unsigned long	flags;
-	unsigned long	baudrate;
+	unsigned int	baudrate;
 	unsigned long	have_console;	/* serial_init() was called */
 #ifdef CONFIG_PRE_CONSOLE_BUFFER
 	unsigned long	precon_buf_idx;	/* Pre-Console buffer index */
diff --git a/board/etx094/Makefile b/board/8dtech/eco5pk/Makefile
similarity index 84%
copy from board/etx094/Makefile
copy to board/8dtech/eco5pk/Makefile
index 6dc495c..befe60a 100644
--- a/board/etx094/Makefile
+++ b/board/8dtech/eco5pk/Makefile
@@ -1,7 +1,9 @@
 #
-# (C) Copyright 2000-2006
+# (C) Copyright 2000, 2001, 2002
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
+# Adapted from ti/evm/Makefile
+#
 # See file CREDITS for list of people who contributed to this
 # project.
 #
@@ -25,11 +27,10 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	= $(BOARD).o flash.o
+COBJS	:= eco5pk.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
 
 $(LIB):	$(obj).depend $(OBJS)
 	$(call cmd_link_o_target, $(OBJS))
@@ -40,5 +41,3 @@
 include $(SRCTREE)/rules.mk
 
 sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/8dtech/eco5pk/eco5pk.c b/board/8dtech/eco5pk/eco5pk.c
new file mode 100644
index 0000000..cdb5b6f
--- /dev/null
+++ b/board/8dtech/eco5pk/eco5pk.c
@@ -0,0 +1,61 @@
+/*
+ * eco5pk.c - board file for 8D Technology's AM3517 based eco5pk board
+ *
+ * Based on am3517evm.c
+ *
+ * Copyright (C) 2011-2012 8D Technologies inc.
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <common.h>
+#include <netdev.h>
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/emac_defs.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <crc.h>
+#include <asm/mach-types.h>
+#include "eco5pk.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+	gpio_request(30, "RESOUT");
+	gpio_direction_output(30, 1);
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_ECO5_PK();
+}
diff --git a/board/8dtech/eco5pk/eco5pk.h b/board/8dtech/eco5pk/eco5pk.h
new file mode 100644
index 0000000..d289e2b
--- /dev/null
+++ b/board/8dtech/eco5pk/eco5pk.h
@@ -0,0 +1,404 @@
+/*
+ * eco5.h - Header file for the 8D Technologies ECO5 board.
+ *
+ * Based on  am3517evm.h
+ * Based on ti/evm/evm.h
+ *
+ * Copyright (C) 2011 8D Technologies inc.
+ * Copyright (C) 2009 Texas Instruments Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _ECO5PK_H__
+#define _ECO5PK_H__
+
+const omap3_sysinfo sysinfo = {
+	DDR_DISCRETE,
+	"ECO5 Board",
+	"NAND",
+};
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * M0   - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_ECO5_PK() \
+	/* SDRC */\
+	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SDRC_DQS0N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS1N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS2N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_DQS3N),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SDRC_CKE0),		(M0)) \
+	MUX_VAL(CP(SDRC_CKE1),		(M0)) \
+	MUX_VAL(CP(STRBEN_DLY0),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(STRBEN_DLY1),	(IEN  | PTD | EN  | M0)) \
+	/* GPMC */\
+	MUX_VAL(CP(GPMC_A1),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A2),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A3),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A4),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A5),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A6),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A7),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A8),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A9),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D2),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D3),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D4),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D5),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D6),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D7),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D8),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D9),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D10),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D11),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D12),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D13),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D14),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_D15),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS4),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS  | PTU | DIS | M3)) \
+	MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | DIS  | M4)) \
+	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M4)) \
+							 /* - ETH_nRESET*/\
+	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M0)) \
+	/* DSS */\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA0),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA1),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA2),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA3),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA4),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA5),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA6),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA7),		(IEN  | PTD | DIS | M4)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
+	/* CAMERA */\
+	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+							 /* - CAM_RESET*/\
+	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) \
+	/* MMC */\
+	MUX_VAL(CP(MMC1_CLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M4)) \
+	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M4)) \
+	\
+	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTD | DIS | M0)) \
+	/* McBSP */\
+	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKR),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_DR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_FSX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP1_CLKX),	(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP2_FSX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP2_CLKX),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP2_DR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP3_DX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCBSP3_DR),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IEN  | PTD | DIS | M4)) /* LED ACT */ \
+	\
+	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(MCBSP4_CLKX),	(IDIS | PTD | DIS | M4)) /*GPIO_152*/\
+							 /* - LCD_INI*/\
+	MUX_VAL(CP(MCBSP4_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_153*/\
+							 /* - LCD_ENVDD */\
+	MUX_VAL(CP(MCBSP4_DX),		(IDIS | PTD | DIS | M4)) /*GPIO_154*/\
+							 /* - LCD_QVGA/nVGA */\
+	MUX_VAL(CP(MCBSP4_FSX),		(IDIS | PTD | DIS | M4)) /*GPIO_155*/\
+							 /* - LCD_RESB */\
+	/* UART */\
+	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART1_RTS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART1_CTS),		(IEN  | PTU | DIS | M0)) \
+	\
+	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M0)) \
+	\
+	MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTU | DIS | M0)) \
+	MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) \
+	/* I2C */\
+	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) \
+	/* McSPI */\
+	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(MCSPI1_CS1),		(IEN  | PTD | EN  | M4)) /*GPIO_175*/\
+	MUX_VAL(CP(MCSPI1_CS2),		(IEN  | PTU | DIS | M4)) /*GPIO_176*/\
+							 /* - LAN_INTR*/\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTD | EN  | M0)) \
+	\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTD | EN  | M4)) \
+							/* LCD_EN_BACKLIGHT */\
+	MUX_VAL(CP(MCSPI2_CS1),		(IDIS | PTD | EN  | M4)) \
+	/* CCDC */\
+	MUX_VAL(CP(CCDC_PCLK),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_FIELD),		(IEN  | PTD | DIS | M1)) \
+	MUX_VAL(CP(CCDC_HD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_VD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(CCDC_WEN),		(IEN  | PTD | DIS | M1)) \
+	MUX_VAL(CP(CCDC_DATA0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA1),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA3),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA4),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA5),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA6),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(CCDC_DATA7),		(IEN  | PTD | DIS | M0)) \
+	/* RMII */\
+	MUX_VAL(CP(RMII_MDIO_DATA),	(IEN  |  M0)) \
+	MUX_VAL(CP(RMII_MDIO_CLK),	(M0)) \
+	MUX_VAL(CP(RMII_RXD0)	,	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXD1),		(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_CRS_DV),	(IEN  | PTD | M0)) \
+	MUX_VAL(CP(RMII_RXER),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD0),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXD1),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
+	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
+	/* HECC */\
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTU | EN  | M0)) \
+	/* HSUSB */\
+	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(USB0_DRVBUS),	(IEN  | PTD | EN  | M0)) \
+	/* HDQ */\
+	MUX_VAL(CP(HDQ_SIO),		(IEN  | PTU | EN  | M0)) \
+	/* Control and debug */\
+	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) \
+							/* SYS_nRESWARM */\
+	MUX_VAL(CP(SYS_NRESWARM),	(IDIS | PTU | DIS | M4)) \
+							/* - GPIO30 */\
+	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /* GPIO_2 */\
+							 /* - PEN_IRQ */\
+	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /* GPIO_3 */\
+	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /* GPIO_4 */\
+	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /* GPIO_5 */\
+	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /* GPIO_6 */\
+	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /* GPIO_7 */\
+	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /* GPIO_8 */\
+							 /* - VIO_1V8*/\
+	MUX_VAL(CP(SYS_BOOT7),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(SYS_BOOT8),		(IEN  | PTD | EN  | M0)) \
+	\
+	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M0)) \
+	/* JTAG */\
+	MUX_VAL(CP(JTAG_nTRST),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_TDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_EMU0),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(JTAG_EMU1),		(IEN  | PTD | DIS | M0)) \
+	/* ETK (ES2 onwards) */\
+	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D10_ES2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D11_ES2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTD | DIS | M0)) \
+	/* Die to Die */\
+	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) \
+	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0))
+
+#endif
diff --git a/board/BuS/eb_cpu5282/u-boot.lds b/board/BuS/eb_cpu5282/u-boot.lds
index 4ba1964..0c92d31 100644
--- a/board/BuS/eb_cpu5282/u-boot.lds
+++ b/board/BuS/eb_cpu5282/u-boot.lds
@@ -65,9 +65,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/LEOX/elpt860/u-boot.lds b/board/LEOX/elpt860/u-boot.lds
index 5aaf6b3..2bb876d 100644
--- a/board/LEOX/elpt860/u-boot.lds
+++ b/board/LEOX/elpt860/u-boot.lds
@@ -86,9 +86,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/Marvell/common/serial.c b/board/Marvell/common/serial.c
index 1327c62..4a780c3 100644
--- a/board/Marvell/common/serial.c
+++ b/board/Marvell/common/serial.c
@@ -139,20 +139,13 @@
 
 #endif /* CONFIG_MPSC */
 
-static void marvell_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device marvell_serial_drv = {
 	.name	= "marvell_serial",
 	.start	= marvell_serial_init,
 	.stop	= NULL,
 	.setbrg	= marvell_serial_setbrg,
 	.putc	= marvell_serial_putc,
-	.puts	= marvell_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= marvell_serial_getc,
 	.tstc	= marvell_serial_tstc,
 };
diff --git a/board/RPXClassic/u-boot.lds b/board/RPXClassic/u-boot.lds
index d0b60cf..18f962c 100644
--- a/board/RPXClassic/u-boot.lds
+++ b/board/RPXClassic/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/RPXClassic/u-boot.lds.debug b/board/RPXClassic/u-boot.lds.debug
index 99c48f2..dc8c4e9 100644
--- a/board/RPXClassic/u-boot.lds.debug
+++ b/board/RPXClassic/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/RPXlite/u-boot.lds b/board/RPXlite/u-boot.lds
index d0b60cf..18f962c 100644
--- a/board/RPXlite/u-boot.lds
+++ b/board/RPXlite/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/RPXlite/u-boot.lds.debug b/board/RPXlite/u-boot.lds.debug
index 99c48f2..dc8c4e9 100644
--- a/board/RPXlite/u-boot.lds.debug
+++ b/board/RPXlite/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/RPXlite_dw/u-boot.lds b/board/RPXlite_dw/u-boot.lds
index d0b60cf..18f962c 100644
--- a/board/RPXlite_dw/u-boot.lds
+++ b/board/RPXlite_dw/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/RPXlite_dw/u-boot.lds.debug b/board/RPXlite_dw/u-boot.lds.debug
index 4491edd..b43a1e4 100644
--- a/board/RPXlite_dw/u-boot.lds.debug
+++ b/board/RPXlite_dw/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/RRvision/u-boot.lds b/board/RRvision/u-boot.lds
index 8385373..748e511 100644
--- a/board/RRvision/u-boot.lds
+++ b/board/RRvision/u-boot.lds
@@ -71,9 +71,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds
index 9dbaa6f..c41eed0 100644
--- a/board/actux1/u-boot.lds
+++ b/board/actux1/u-boot.lds
@@ -34,7 +34,7 @@
 		net/libnet.o(.text*)
 		board/actux1/libactux1.o(.text*)
 		arch/arm/cpu/ixp/libixp.o(.text*)
-		drivers/serial/libserial.o(.text*)
+		drivers/input/libinput.o(.text*)
 
 		. = env_offset;
 		common/env_embedded.o(.ppcenv)
@@ -54,11 +54,11 @@
 		*(.got)
 	}
 	. =.;
-	__u_boot_cmd_start =.;
-	.u_boot_cmd : {
-		*(.u_boot_cmd)
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
 	}
-	__u_boot_cmd_end =.;
 
 	. = ALIGN (4);
 	.rel.dyn : {
diff --git a/board/actux2/u-boot.lds b/board/actux2/u-boot.lds
index 3575ed9..8409984 100644
--- a/board/actux2/u-boot.lds
+++ b/board/actux2/u-boot.lds
@@ -34,7 +34,7 @@
 		net/libnet.o(.text*)
 		board/actux2/libactux2.o(.text*)
 		arch/arm/cpu/ixp/libixp.o(.text*)
-		drivers/serial/libserial.o(.text*)
+		drivers/input/libinput.o(.text*)
 
 		. = env_offset;
 		common/env_embedded.o(.ppcenv)
@@ -54,11 +54,11 @@
 		*(.got)
 	}
 	. =.;
-	__u_boot_cmd_start =.;
-	.u_boot_cmd : {
-		*(.u_boot_cmd)
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
 	}
-	__u_boot_cmd_end =.;
 
 	. = ALIGN (4);
 	.rel.dyn : {
diff --git a/board/actux3/u-boot.lds b/board/actux3/u-boot.lds
index 35aab29..a3bd02b 100644
--- a/board/actux3/u-boot.lds
+++ b/board/actux3/u-boot.lds
@@ -34,7 +34,7 @@
 		net/libnet.o(.text*)
 		board/actux3/libactux3.o(.text*)
 		arch/arm/cpu/ixp/libixp.o(.text*)
-		drivers/serial/libserial.o(.text*)
+		drivers/input/libinput.o(.text*)
 
 		. = env_offset;
 		common/env_embedded.o(.ppcenv)
@@ -54,11 +54,11 @@
 		*(.got)
 	}
 	. =.;
-	__u_boot_cmd_start =.;
-	.u_boot_cmd : {
-		*(.u_boot_cmd)
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
 	}
-	__u_boot_cmd_end =.;
 
 	. = ALIGN (4);
 	.rel.dyn : {
diff --git a/board/adder/u-boot.lds b/board/adder/u-boot.lds
index a762769..73e2f3f 100644
--- a/board/adder/u-boot.lds
+++ b/board/adder/u-boot.lds
@@ -62,9 +62,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds
index 52c986e..656b2fb 100644
--- a/board/ait/cam_enc_4xx/u-boot-spl.lds
+++ b/board/ait/cam_enc_4xx/u-boot-spl.lds
@@ -48,6 +48,10 @@
 	. = ALIGN(4);
 	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
 	. = ALIGN(4);
+	.u_boot_list : {
+		#include <u-boot.lst>
+	} >.sram
+	. = ALIGN(4);
 	.rel.dyn : {
 		__rel_dyn_start = .;
 		*(.rel*)
diff --git a/board/altera/nios2-generic/u-boot.lds b/board/altera/nios2-generic/u-boot.lds
index 88ced62..289386b 100644
--- a/board/altera/nios2-generic/u-boot.lds
+++ b/board/altera/nios2-generic/u-boot.lds
@@ -46,13 +46,11 @@
 	 * the initialization code relocates the command table as
 	 * well -- admittedly, this is just pure laziness ;-)
 	 */
-	__u_boot_cmd_start = .;
-	.u_boot_cmd :
-	{
-	  *(.u_boot_cmd)
-	}
+
 	. = ALIGN(4);
-	__u_boot_cmd_end = .;
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	/* INIT DATA sections - "Small" data (see the gcc -G option)
 	 * is always gp-relative. Here we make all init data sections
diff --git a/board/amcc/acadia/u-boot-nand.lds b/board/amcc/acadia/u-boot-nand.lds
index ab67de2..beba978 100644
--- a/board/amcc/acadia/u-boot-nand.lds
+++ b/board/amcc/acadia/u-boot-nand.lds
@@ -72,10 +72,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/amcc/bamboo/u-boot-nand.lds b/board/amcc/bamboo/u-boot-nand.lds
index 3ad8709..2dd00d7 100644
--- a/board/amcc/bamboo/u-boot-nand.lds
+++ b/board/amcc/bamboo/u-boot-nand.lds
@@ -73,10 +73,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/amcc/canyonlands/u-boot-nand.lds b/board/amcc/canyonlands/u-boot-nand.lds
index 76f89f1..8ac5116 100644
--- a/board/amcc/canyonlands/u-boot-nand.lds
+++ b/board/amcc/canyonlands/u-boot-nand.lds
@@ -73,10 +73,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/amcc/kilauea/u-boot-nand.lds b/board/amcc/kilauea/u-boot-nand.lds
index ab67de2..beba978 100644
--- a/board/amcc/kilauea/u-boot-nand.lds
+++ b/board/amcc/kilauea/u-boot-nand.lds
@@ -72,10 +72,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/amcc/sequoia/u-boot-nand.lds b/board/amcc/sequoia/u-boot-nand.lds
index 07ae8b1..18266ef 100644
--- a/board/amcc/sequoia/u-boot-nand.lds
+++ b/board/amcc/sequoia/u-boot-nand.lds
@@ -73,10 +73,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/amcc/sequoia/u-boot-ram.lds b/board/amcc/sequoia/u-boot-ram.lds
index 423400a..6b02784 100644
--- a/board/amcc/sequoia/u-boot-ram.lds
+++ b/board/amcc/sequoia/u-boot-ram.lds
@@ -64,10 +64,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/astro/mcf5373l/u-boot.lds b/board/astro/mcf5373l/u-boot.lds
index a1d8e0f..bc40fd6 100644
--- a/board/astro/mcf5373l/u-boot.lds
+++ b/board/astro/mcf5373l/u-boot.lds
@@ -22,51 +22,18 @@
  */
 
 OUTPUT_ARCH(m68k)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
+
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
   .text      :
   {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/m68k/cpu/mcf532x/start.o		(.text)
-    arch/m68k/lib/traps.o		(.text)
-    arch/m68k/lib/interrupts.o	(.text)
-    common/dlmalloc.o		(.text)
-    lib/zlib.o		(.text)
+    arch/m68k/cpu/mcf532x/start.o		(.text*)
 
     . = DEFINED(env_offset) ? env_offset : .;
-    common/env_embedded.o	(.text)
+    common/env_embedded.o	(.text*)
 
-    *(.text)
-/*    *(.fixup)*/
-    *(.got1)
+    *(.text*)
   }
   _etext = .;
   PROVIDE (etext = .);
@@ -74,9 +41,6 @@
   {
     *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
   }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
 
   /* Read-write section, merged into data segment: */
   . = (. + 0x00FF) & 0xFFFFFF00;
@@ -86,33 +50,30 @@
   .reloc   :
   {
     __got_start = .;
-    *(.got)
+    KEEP(*(.got))
     __got_end = .;
     _GOT2_TABLE_ = .;
-    *(.got2)
+    KEEP(*(.got2))
     _FIXUP_TABLE_ = .;
-    *(.fixup)
+    KEEP(*(.fixup))
   }
   __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
   __fixup_entries = (. - _FIXUP_TABLE_)>>2;
 
   .data    :
   {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
+    *(.data*)
+    *(.sdata*)
   }
   _edata  =  .;
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
@@ -130,9 +91,8 @@
   .bss       :
   {
    _sbss = .;
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
+   *(.sbss*)
+   *(.bss*)
    *(COMMON)
    . = ALIGN(4);
    _ebss = .;
diff --git a/board/atmel/at91sam9x5ek/at91sam9x5ek.c b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
index 06028aa..edb0886 100644
--- a/board/atmel/at91sam9x5ek/at91sam9x5ek.c
+++ b/board/atmel/at91sam9x5ek/at91sam9x5ek.c
@@ -31,6 +31,7 @@
 #include <asm/arch/clk.h>
 #include <lcd.h>
 #include <atmel_hlcdc.h>
+#include <atmel_mci.h>
 #ifdef CONFIG_MACB
 #include <net.h>
 #endif
@@ -258,6 +259,15 @@
 }
 #endif /* CONFIG_ATMEL_SPI */
 
+#ifdef CONFIG_GENERIC_ATMEL_MCI
+int board_mmc_init(bd_t *bd)
+{
+	at91_mci_hw_init();
+
+	return atmel_mci_init((void *)ATMEL_BASE_HSMCI0);
+}
+#endif
+
 int board_early_init_f(void)
 {
 	at91_seriald_hw_init();
diff --git a/board/avionic-design/medcom-wide/Makefile b/board/avionic-design/medcom-wide/Makefile
index 864bc0e..e8c1e8b 100644
--- a/board/avionic-design/medcom-wide/Makefile
+++ b/board/avionic-design/medcom-wide/Makefile
@@ -29,9 +29,11 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= ../../nvidia/common/board.o
-COBJS	+= ../common/tamonten.o
+COBJS-y	:= ../common/tamonten.o
 
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/board/avionic-design/plutux/Makefile b/board/avionic-design/plutux/Makefile
index 864bc0e..e8c1e8b 100644
--- a/board/avionic-design/plutux/Makefile
+++ b/board/avionic-design/plutux/Makefile
@@ -29,9 +29,11 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= ../../nvidia/common/board.o
-COBJS	+= ../common/tamonten.o
+COBJS-y	:= ../common/tamonten.o
 
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/board/avionic-design/tec/Makefile b/board/avionic-design/tec/Makefile
index 864bc0e..e8c1e8b 100644
--- a/board/avionic-design/tec/Makefile
+++ b/board/avionic-design/tec/Makefile
@@ -29,9 +29,11 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= ../../nvidia/common/board.o
-COBJS	+= ../common/tamonten.o
+COBJS-y	:= ../common/tamonten.o
 
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/board/bmw/Makefile b/board/bmw/Makefile
deleted file mode 100644
index 4f88efa..0000000
--- a/board/bmw/Makefile
+++ /dev/null
@@ -1,50 +0,0 @@
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2002
-# James F. Dougherty, Broadcom Corporation, jfd@broadcom.com
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o flash.o ns16550.o serial.o m48t59y.o
-
-SOBJS	= early_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/bmw/README b/board/bmw/README
deleted file mode 100644
index 1fbef79..0000000
--- a/board/bmw/README
+++ /dev/null
@@ -1,331 +0,0 @@
-Broadcom 95xx BMW CPCI Platform
-
-Overview
-=========
-BMW is an MPC8245 system controller featuring:
-* 3U CPCI Form Factor
-* BCM5703 Gigabit Ethernet
-* M48T59Y NVRAM
-* 16MB DOC
-* DIP Socket for Socketed DOC up to 1GB
-* 64MB SDRAM
-* LCD Display
-* Configurable Jumper options for 66,85, and 100Mhz memory bus
-
-
-BMW System Address Map
-======================
-BMW uses the MPC8245 CHRP Address MAP B found in the MPC8245 Users Manual
-(P.121, Section 3.1 Address Maps, Address Map B). Other I/O devices found
-onboard the processor module are listed briefly below:
-
-0x00000000 - 0x40000000 - 64MB SDRAM SIMM
-			  (Unregistered PC-100 SDRAM DIMM Module)
-
-0xFF000000 - 0xFF001FFF - M-Systems DiskOnChip (TM) 2000
-			  TSOP 16MB (MD2211-D16-V3)
-
-0x70000000 - 0x70001FFF - M-Systems DiskOnChip (TM) 2000
-			  DIP32 (Socketed 16MB - 1GB ) *
-			  NOTE: this is not populated on all systems.
-
-0x7c000000 - 0x7c000000 - Reset Register
-			  (Write 0 to reset)
-
-0x7c000001 - 0x7c000001 - System LED
-			  (Clear Bit 7 to turn on, set to shut off)
-
-0x7c000002 - 0x7c000002 - M48T59 Watchdog IRQ3
-			  (Clear bit 7 to reset, set to assert IRQ3)
-
-0x7c000003 - 0x7c000003 - M48T59 Write-Protect Register
-			  (Clear bit 7 to make R/W, set to make R/O)
-
-0x7c002000 - 0x7c002003 - Infineon OSRAM DLR2416 4 Character
-			  5x7 Dot Matrix Alphanumeric Display
-			  (Each byte sets the appropriate character)
-
-0x7c004000 - 0x7c005FF0 - SGS-THOMSON M48T59Y 8K NVRAM/RTC
-			  NVRAM Memory Region
-
-0x7c005FF0 - 0x7c005FFF - SGS-THOMSON M48T59Y 8K NVRAM/RTC
-			  Realtime Clock Registers
-
-0xFFF00000 - 0xFFF80000 - 512K PLCC32 BootRom
-			  (AMD AM29F040, ST 29W040B)
-
-0xFFF00100 -              System Reset Vector
-
-
-IO/MMU (BAT) Configuration
-======================
-The following Block-Address-Translation (BAT) configuration
-is recommended to access all I/O devices.
-
-#define CONFIG_SYS_IBAT0L  (0x00000000 | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U  (0x00000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L  (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U  (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
-
-
-Interrupt Mappings
-======================
-BMW uses MPC8245 discrete mode interrupts. With the following
-hardwired mappings:
-
-BCM5701 10/100/1000 Ethernet		IRQ1
-CompactPCI Interrupt A			IRQ2
-RTC/Watchdog Interrupt			IRQ3
-Internal NS16552 UART			IRQ4
-
-
-Jumper Settings
-======================
-
-BMW has a jumper (JP600) for selecting 66, 85, or 100Mhz memory bus.
-A jumper (X) is a 0 bit.
-
-Hence 66= 10110
-      85= 11000
-     100= 10000
-
-Jumper Settings for various Speeds
-=======================
-J1 J2 J3 J4 J5
-    X        X    66Mhz
-=======================
-J1 J2 J3 J4 J5
-       X  X  X    85Mhz
-=======================
-J1 J2 J3 J4 J5
-    X  X  X  X   100Mhz
-=======================
-
-Obviously, 100Mhz memory bus is recommended for optimum performance.
-
-
-U-Boot
-===============
-Broadcom BMW board is supported under config_BWM option.
-Supported features:
-
-- NVRAM setenv/getenv (used by Linux Kernel for configuration variables)
-- BCM570x TFTP file transfer support
-- LCD Display Support
-- DOC Support - (underway)
-
-
-U-Boot 1.2.0 (Aug  6 2002 - 17:44:48)
-
-CPU:   MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)
-Built: Aug  6 2002 at 17:44:37
-Local Bus at 66 MHz
-DRAM:  64 MB
-FLASH: 4095 MB
-In:    serial
-Out:   serial
-Err:   serial
-DOC:   No DiskOnChip found
-Hit any key to stop autoboot:  0
-=>printenv
-bootdelay=5
-baudrate=9600
-clocks_in_mhz=1
-hostname=switch-2
-bootcmd=tftp 100000 vmlinux.img;bootm
-gateway=10.16.64.1
-ethaddr=00:00:10:18:10:10
-nfsroot=172.16.40.111:/boot/root-fs
-filesize=5ec8c
-netmask=255.255.240.0
-ipaddr=172.16.40.114
-serverip=172.16.40.111
-root=/dev/nfs
-stdin=serial
-stdout=serial
-stderr=serial
-
-Environment size: 315/8172 bytes
-=>boot
-
-
-DevTools
-========
-ELDK
-	DENX Embedded Linux Development Kit
-
-ROM Emulator
-	Grammar Engine PROMICE P1160-90-AI21E (2MBx8bit, 90ns access time)
-	Grammar Engine PL32E 32Pin PLCC Emulation cables
-	Grammar Engine 3VA8CON (3Volt adapter with Short cables)
-	Grammar Engine FPNET PromICE Ethernet Adapters
-
-ICE
-	WRS/EST VisionICE-II (PPC8240)
-
-
-=>reset
-
-
-U-Boot 1.2.0 (Aug  6 2002 - 17:44:48)
-
-CPU:   MPC8245 Revision 16.20 at 264 MHz: 16 kB I-Cache 16 kB D-Cache
-Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)
-Built: Aug  6 2002 at 17:44:37
-Local Bus at 66 MHz
-DRAM:  64 MB
-FLASH: 4095 MB
-In:    serial
-Out:   serial
-Err:   serial
-DOC:   No DiskOnChip found
-Hit any key to stop autoboot:  0
-
-Broadcom BCM5701 1000Base-T: bus 0, device 13, function 0: MBAR=0x80100000
-BCM570x PCI Memory base address @0x80100000
-eth0:Broadcom BCM5701 1000Base-T: 100 Mbps half duplex link up, flow control OFF
-eth0: Broadcom BCM5701 1000Base-T @0x80100000,node addr 000010181010
-eth0: BCM5700 with Broadcom BCM5701 Integrated Copper transceiver found
-eth0: 32-bit PCI 33MHz, MTU: 1500,Rx Checksum ON
-ARP broadcast 1
-TFTP from server 172.16.40.111; our IP address is 172.16.40.114
-Filename 'vmlinux.img'.
-Load address: 0x100000
-Loading: #################################################################
-	 ####################################T #############################
-	 ######################
-done
-Bytes transferred = 777199 (bdbef hex)
-
-eth0:Broadcom BCM5701 1000Base-T,HALT,POWER DOWN,done - offline.
-## Booting image at 00100000 ...
-   Image Name:   vmlinux.bin.gz
-   Created:      2002-08-06   6:30:13 UTC
-   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
-   Data Size:    777135 Bytes = 758 kB = 0 MB
-   Load Address: 00000000
-   Entry Point:  00000000
-   Verifying Checksum ... OK
-   Uncompressing Kernel Image ... OK
-Memory BAT mapping: BAT2=64Mb, BAT3=0Mb, residual: 0Mb
-Linux version 2.4.19-rc3 (jfd@que) (gcc version 2.95.3 20010111 (prerelease/franzo/20010111)) #168 Mon Aug 5 23:29:20 PDT 2002
-CPU:82xx: 32 I-Cache Block Size, 32 D-Cache Block Size PVR: 0x810000
-U-Boot Environment: 0xc01b08f0
-IP PNP: 802.3 Ethernet Address=<0:0:10:18:10:10>
-cpu0: MPC8245/KAHLUA-II : BMW Platform : 64MB RAM: BPLD Rev. 6e
-NOTICE: mounting root file system via NFS
-IP PNP: switch-2: eth0 IP 172.16.40.114/255.255.240.0 gateway 10.16.64.1 server 172.16.40.111
-On node 0 totalpages: 16384
-zone(0): 16384 pages.
-zone(1): 0 pages.
-zone(2): 0 pages.
-Kernel command line: console=ttyS0,9600 ip=172.16.40.114:172.16.40.111:10.16.64.1:255.255.240.0:switch-2:eth0 root=/dev/nfs rw nfsroot=172.16.40.111:/boot/root-fs,timeo=200,retrans=500 nfsaddrs=172.16.40.114:172.16.40.111
-root_dev_setup:/dev/nfs or 00:ff
-time_init: decrementer frequency = 16.501145 MHz
-Calibrating delay loop... 175.71 BogoMIPS
-Memory: 62572k available (1396k kernel code, 436k data, 100k init, 0k highmem)
-Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
-Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
-Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
-Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
-Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
-POSIX conformance testing by UNIFIX
-PCI: Probing PCI hardware
-Linux NET4.0 for Linux 2.4
-Based upon Swansea University Computer Society NET3.039
-Initializing RT netlink socket
-Starting kswapd
-devfs: v1.12a (20020514) Richard Gooch (rgooch@atnf.csiro.au)
-devfs: devfs_debug: 0x0
-devfs: boot_options: 0x1
-Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
-pty: 256 Unix98 ptys configured
-Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
-Testing ttyS0 (0xf7f51500, 0xf7f51500)...
-Testing ttyS1 (0xfc004600, 0xfc004600)...
-ttyS00 at 0xf7f51500 (irq = 24) is a ST16650
-ttyS01 at 0xfc004600 (irq = 25) is a 16550A
-Real Time Clock Driver v1.10e
-RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
-loop: loaded (max 8 devices)
-TFFS 5.1.1 Flash disk driver for DiskOnChip
-Copyright (C) 1998,2001 M-Systems Flash Disk Pioneers Ltd.
-DOC device(s) found: 1
-fl_init: registered device at major: 100
-fl_geninit: registered device at major: 100
-Partition check:
- fla: p1
-partition: /dev/fl/0: start_sect: 0,nr_sects: 32000 Fl_blk_size[]: 16000KB
-partition: /dev/fl/1: start_sect: 2,nr_sects: 31998 Fl_blk_size[]: 15999KB
-partition: /dev/fl/2: start_sect: 0,nr_sects: 0 Fl_blk_size[]: 0KB
-partition: /dev/fl/3: start_sect: 0,nr_sects: 0 Fl_blk_size[]: 0KB
-Broadcom Gigabit Ethernet Driver bcm5700 ver. 3.0.7 (07/17/02)
-eth0: Broadcom BCM5701 found at mem bfff0000, IRQ 1, node addr 000010181010
-eth0: Broadcom BCM5701 Integrated Copper transceiver found
-eth0: Scatter-gather ON, 64-bit DMA ON, Tx Checksum ON, Rx Checksum ON, 802.1Q VLAN ON
-bond0 registered without MII link monitoring, in bonding mode.
-rtc: unable to get misc minor
-NET4: Linux TCP/IP 1.0 for NET4.0
-IP Protocols: ICMP, UDP, TCP, IGMP
-IP: routing cache hash table of 512 buckets, 4Kbytes
-TCP: Hash tables configured (established 4096 bind 4096)
-bcm5700: eth0 NIC Link is UP, 100 Mbps half duplex
-IP-Config: Gateway not on directly connected network.
-NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
-802.1Q VLAN Support v1.7 Ben Greear <greearb@candelatech.com>
-All bugs added by David S. Miller <davem@redhat.com>
-Looking up port of RPC 100003/2 on 172.16.40.111
-Looking up port of RPC 100005/1 on 172.16.40.111
-VFS: Mounted root (nfs filesystem).
-Mounted devfs on /dev
-Freeing unused kernel memory: 100k init
-INIT: version 2.78 booting
-Mounting local filesystems...
-not mounted anything
-Setting up symlinks in /dev...done.
-Setting up extra devices in /dev...done.
-Starting devfsd...Started device management daemon for /dev
-INIT: Entering runlevel: 2
-Starting internet superserver: inetd.
-
-
-Welcome to Linux/PPC
-MPC8245/BMW
-
-
-switch-2 login: root
-Password:
-PAM_unix[49]: (login) session opened for user root by LOGIN(uid=0)
-Last login: Thu Nov 25 11:51:14 1920 on console
-
-
-Welcome to Linux/PPC
-MPC8245/BMW
-
-
-login[49]: ROOT LOGIN on `console'
-
-root@switch-2:~# cat /proc/cpuinfo
-cpu             : 82xx
-revision        : 16.20 (pvr 8081 1014)
-bogomips        : 175.71
-vendor          : Broadcom
-machine         : BMW/MPC8245
-root@switch-2:~#
diff --git a/board/bmw/bmw.c b/board/bmw/bmw.c
deleted file mode 100644
index 5ba6c09..0000000
--- a/board/bmw/bmw.c
+++ /dev/null
@@ -1,159 +0,0 @@
-/*
- * (C) Copyright 2002
- * James F. Dougherty, Broadcom Corporation, jfd@broadcom.com
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <watchdog.h>
-#include <command.h>
-#include <malloc.h>
-#include <stdio_dev.h>
-#include <net.h>
-#include <timestamp.h>
-#include <dtt.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <linux/mtd/doc2000.h>
-
-#include "bmw.h"
-#include "m48t59y.h"
-#include <pci.h>
-
-
-int checkboard(void)
-{
-    ulong busfreq  = get_bus_freq(0);
-    char  buf[32];
-
-    puts ("Board: BMW MPC8245/KAHLUA2 - CHRP (MAP B)\n");
-    printf("Built: %s at %s\n", U_BOOT_DATE, U_BOOT_TIME);
-    /* printf("MPLD:  Revision %d\n", SYS_REVID_GET()); */
-    printf("Local Bus at %s MHz\n", strmhz(buf, busfreq));
-    return 0;
-}
-
-phys_size_t initdram(int board_type)
-{
-    return 64*1024*1024;
-}
-
-
-void
-get_tod(void)
-{
-    int year, month, day, hour, minute, second;
-
-    m48_tod_get(&year,
-		&month,
-		&day,
-		&hour,
-		&minute,
-		&second);
-
-    printf("  Current date/time: %d/%d/%d %d:%d:%d \n",
-	   month, day, year, hour, minute, second);
-
-}
-
-/*
- * EPIC, PCI, and I/O devices.
- * Initialize Mousse Platform, probe for PCI devices,
- * Query configuration parameters if not set.
- */
-int misc_init_f (void)
-{
-#if 0
-    m48_tod_init(); /* Init SGS M48T59Y TOD/NVRAM */
-    printf("RTC:   M48T589 TOD/NVRAM (%d) bytes\n",
-	   TOD_NVRAM_SIZE);
-    get_tod();
-#endif
-
-    sys_led_msg("BOOT");
-    return 0;
-}
-
-
-/*
- * Initialize PCI Devices, report devices found.
- */
-struct pci_controller hose;
-
-void pci_init_board (void)
-{
-    pci_mpc824x_init(&hose);
-    /* pci_dev_init(0); */
-}
-
-/*
- * Write characters to LCD display.
- * Note that the bytes for the first character is the last address.
- */
-void
-sys_led_msg(char* msg)
-{
-    LED_REG(0) = msg[3];
-    LED_REG(1) = msg[2];
-    LED_REG(2) = msg[1];
-    LED_REG(3) = msg[0];
-}
-
-#ifdef CONFIG_CMD_DOC
-/*
- * Map onboard TSOP-16MB DOC FLASH chip.
- */
-void doc_init (void)
-{
-    doc_probe(DOC_BASE_ADDR);
-}
-#endif
-
-#define NV_ADDR	((volatile unsigned char *) CONFIG_ENV_ADDR)
-
-/* Read from NVRAM */
-void*
-nvram_read(void *dest, const long src, size_t count)
-{
-    int i;
-    volatile unsigned char* d = (unsigned char*)dest;
-    volatile unsigned char* s = (unsigned char*)src;
-
-    for( i = 0; i < count;i++)
-	d[i] = s[i];
-
-    return dest;
-}
-
-/* Write to NVRAM */
-void
-nvram_write(long dest, const void *src, size_t count)
-{
-    int i;
-    volatile unsigned char* d = (unsigned char*)dest;
-    volatile unsigned char* s = (unsigned char*)src;
-
-    SYS_TOD_UNPROTECT();
-
-    for( i = 0; i < count;i++)
-	d[i] = s[i];
-
-    SYS_TOD_PROTECT();
-}
diff --git a/board/bmw/bmw.h b/board/bmw/bmw.h
deleted file mode 100644
index dd97569..0000000
--- a/board/bmw/bmw.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- * BMW/MPC8245 Board definitions.
- * For more info, see http://www.vooha.com/
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002
- * James Dougherty (jfd@broadcom.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __BMW_H
-#define __BMW_H
-
-/* System addresses */
-
-#define PCI_SPECIAL_BASE	0xfe000000
-#define PCI_SPECIAL_SIZE	0x01000000
-
-#define EUMBBAR_VAL		0x80500000	/* Location of EUMB region */
-#define EUMBSIZE		0x00100000	/* Size of EUMB region */
-
-/* Extended ROM space devices */
-#define DOC_BASE_ADDR           0xff000000      /* Onboard DOC TSOP 16MB */
-#define DOC2_BASE_ADDR          0x70000000      /* DIP32 socket -> 1GB */
-#define XROM_BASE_ADDR          0x7c000000      /* RCS2 (PAL / Satellite IO) */
-#define PLD_REG_BASE		XROM_BASE_ADDR
-#define LED_REG_BASE		(XROM_BASE_ADDR | 0x2000)
-#define TOD_BASE		(XROM_BASE_ADDR | 0x4000)
-#define LED_REG(x)              (*(volatile unsigned char *) \
-				  (LED_REG_BASE + (x)))
-#define XROM_DEV_SIZE		0x00006000
-
-#define ENET_DEV_BASE		0x80000000
-
-#define PLD_REG(off)		(*(volatile unsigned char *)\
-				  (PLD_REG_BASE + (off)))
-
-#define PLD_REVID_B1		0x7f	/* Fix me */
-#define PLD_REVID_B2		0x01	/* Fix me */
-
-#define SYS_HARD_RESET()	{ for (;;) PLD_REG(0) = 0; } /* clr 0x80 bit */
-#define SYS_REVID_GET()		((int) PLD_REG(0) & 0x7f)
-#define SYS_LED_OFF()		(PLD_REG(1) |= 0x80)
-#define SYS_LED_ON()		(PLD_REG(1) &= ~0x80)
-#define SYS_WATCHDOG_IRQ3()	(PLD_REG(2) |= 0x80)
-#define SYS_WATCHDOG_RESET()	(PLD_REG(2) &= ~0x80)
-#define SYS_TOD_PROTECT()	(PLD_REG(3) |= 0x80)
-#define SYS_TOD_UNPROTECT()	(PLD_REG(3) &= ~0x80)
-
-#define	TOD_REG_BASE		(TOD_BASE | 0x1ff0)
-#define	TOD_NVRAM_BASE		TOD_BASE
-#define	TOD_NVRAM_SIZE		0x1ff0
-#define	TOD_NVRAM_LIMIT		(TOD_NVRAM_BASE + TOD_NVRAM_SIZE)
-#define RTC(r)		        (TOD_BASE + r)
-
-/* Onboard BCM570x device */
-#define	PCI_ENET_IOADDR		0x80000000
-#define	PCI_ENET_MEMADDR	0x80000000
-
-
-#ifndef __ASSEMBLY__
-/* C Function prototypes */
-void sys_led_msg(char* msg);
-
-#endif /* !__ASSEMBLY__ */
-
-#endif /* __BMW_H */
diff --git a/board/bmw/early_init.S b/board/bmw/early_init.S
deleted file mode 100644
index 63c29d5..0000000
--- a/board/bmw/early_init.S
+++ /dev/null
@@ -1,1170 +0,0 @@
-#include <ppc_asm.tmpl>
-#include <mpc824x.h>
-#include <ppc_defs.h>
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-#define USE_V2_INIT 1 /* Jimmy Blair's initialization. */
-
-
-/*
- * Initialize the MMU using BAT entries and hardwired TLB
- * This obviates the need for any code in cpu_init_f which
- * configures the BAT registers.
-*/
-#define MEMORY_MGMT_MSR_BITS (MSR_DR | MSR_IR) /* Data and Inst Relocate */
-	.global	iommu_setup
-	/* Initialize IO/MMU mappings via BAT method Ch. 7,
-	 * PPC Programming Reference
-	 */
-iommu_setup:
-
-/* initialize the BAT registers (SPRs 528 - 543 */
-#define	mtibat0u(x)	mtspr	528,(x)			/* SPR 528 (IBAT0U) */
-#define mtibat0l(x)	mtspr	529,(x)			/* SPR 529 (IBAT0L) */
-#define mtibat1u(x)	mtspr	530,(x)			/* SPR 530 (IBAT1U) */
-#define mtibat1l(x)	mtspr	531,(x)			/* SPR 531 (IBAT1L) */
-#define mtibat2u(x)	mtspr	532,(x)			/* SPR 532 (IBAT2U) */
-#define mtibat2l(x)	mtspr	533,(x)			/* SPR 533 (IBAT2L) */
-#define mtibat3u(x)	mtspr	534,(x)			/* SPR 534 (IBAT3U) */
-#define mtibat3l(x)	mtspr	535,(x)			/* SPR 535 (IBAT3L) */
-#define mtdbat0u(x)	mtspr	536,(x)			/* SPR 536 (DBAT0U) */
-#define mtdbat0l(x)	mtspr	537,(x)			/* SPR 537 (DBAT0L) */
-#define mtdbat1u(x)	mtspr	538,(x)			/* SPR 538 (DBAT1U) */
-#define mtdbat1l(x)	mtspr	539,(x)			/* SPR 539 (DBAT1L) */
-#define mtdbat2u(x)	mtspr	540,(x)			/* SPR 540 (DBAT2U) */
-#define mtdbat2l(x)	mtspr	541,(x)			/* SPR 541 (DBAT2L) */
-#define mtdbat3u(x)	mtspr	542,(x)			/* SPR 542 (DBAT3U) */
-#define mtdbat3l(x)	mtspr	543,(x)			/* SPR 543 (DBAT3L) */
-
-
-/* PowerPC processors do not necessarily initialize the BAT
-   registers on power-up or reset.  So they are in an unknown
-   state.  Before programming the BATs for the first time, all
-   BAT registers MUST have their Vs and Vp bits cleared in the
-   upper BAT half in order to avoid possibly having 2 BATs
-   valid and mapping the same memory region.
-
-   The reason for this is that, even with address translation
-   disabled, multiple BAT hits for an address are treated as
-   programming errors and can cause unpredictable results.
-
-   It is up to the software to make sure it never has 2 IBAT
-   mappings or 2 DBAT mappings that are valid for the same
-   addresses.  It is not necessary to perform this code
-   sequence every time the BATs are programmed, only when
-   there is a possibility that there may be overlapping BAT
-   entries.
-
-   When programming the BATs in non-reset scenarios, even if
-   you are sure that your new mapping will not temporarily
-   create overlapping regions, it is still a wise idea to
-   invalidate a BAT entry by setting its upper BAT register to
-   all 0's before programming it.  This will avoid having a
-   BAT marked valid that is in an unknown or transient state
-*/
-
-	addis   r5,0,0x0000
-	mtibat0u(r5)
-	mtibat0l(r5)
-	mtibat1u(r5)
-	mtibat1l(r5)
-	mtibat2u(r5)
-	mtibat2l(r5)
-	mtibat3u(r5)
-	mtibat3l(r5)
-	mtdbat0u(r5)
-	mtdbat0l(r5)
-	mtdbat1u(r5)
-	mtdbat1l(r5)
-	mtdbat2u(r5)
-	mtdbat2l(r5)
-	mtdbat3u(r5)
-	mtdbat3l(r5)
-	isync
-
-/*
- *  Set up I/D BAT0
- */
-	lis     r4, CONFIG_SYS_DBAT0L@h
-	ori     r4, r4, CONFIG_SYS_DBAT0L@l
-	lis     r3, CONFIG_SYS_DBAT0U@h
-	ori     r3, r3, CONFIG_SYS_DBAT0U@l
-
-	mtdbat0l(r4)
-	isync
-	mtdbat0u(r3)
-	isync
-	sync
-
-	lis     r4, CONFIG_SYS_IBAT0L@h
-	ori     r4, r4, CONFIG_SYS_IBAT0L@l
-	lis     r3, CONFIG_SYS_IBAT0U@h
-	ori     r3, r3, CONFIG_SYS_IBAT0U@l
-
-	isync
-	mtibat0l(r4)
-	isync
-	mtibat0u(r3)
-	isync
-
-/*
- *  Set up I/D BAT1
- */
-	lis     r4, CONFIG_SYS_IBAT1L@h
-	ori     r4, r4, CONFIG_SYS_IBAT1L@l
-	lis     r3, CONFIG_SYS_IBAT1U@h
-	ori     r3, r3, CONFIG_SYS_IBAT1U@l
-
-	isync
-	mtibat1l(r4)
-	isync
-	mtibat1u(r3)
-	isync
-	mtdbat1l(r4)
-	isync
-	mtdbat1u(r3)
-	isync
-	sync
-
-/*
- *  Set up I/D BAT2
- */
-	lis     r4, CONFIG_SYS_IBAT2L@h
-	ori     r4, r4, CONFIG_SYS_IBAT2L@l
-	lis     r3, CONFIG_SYS_IBAT2U@h
-	ori     r3, r3, CONFIG_SYS_IBAT2U@l
-
-	isync
-	mtibat2l(r4)
-	isync
-	mtibat2u(r3)
-	isync
-	mtdbat2l(r4)
-	isync
-	mtdbat2u(r3)
-	isync
-	sync
-
-/*
- *  Setup I/D BAT3
- */
-	lis     r4, CONFIG_SYS_IBAT3L@h
-	ori     r4, r4, CONFIG_SYS_IBAT3L@l
-	lis     r3, CONFIG_SYS_IBAT3U@h
-	ori     r3, r3, CONFIG_SYS_IBAT3U@l
-
-	isync
-	mtibat3l(r4)
-	isync
-	mtibat3u(r3)
-	isync
-	mtdbat3l(r4)
-	isync
-	mtdbat3u(r3)
-	isync
-	sync
-
-
-/*
- *  Invalidate all 64 TLB's
- */
-	lis     r3, 0
-	mtctr   r3
-	lis     r5, 4
-
-tlblp:
-	tlbie   r3
-	sync
-	addi    r3, r3, 0x1000
-	cmplw   r3, r5
-	blt     tlblp
-
-	sync
-
-/*
- *  Enable Data Translation
- */
-	lis	r4, MEMORY_MGMT_MSR_BITS@h
-	ori	r4, r4, MEMORY_MGMT_MSR_BITS@l
-	mfmsr	r3
-	or	r3, r4, r3
-	mtmsr	r3
-	isync
-	sync
-
-	blr
-
-
-#ifdef USE_V2_INIT
-/* #define USER_I_CACHE_ENABLE 1*/ /* Fast rom boots */
-/* Macro for hiadjust and lo */
-#define HIADJ(arg)	arg@ha
-#define HI(arg)		arg@h
-#define LO(arg)		arg@l
-
-#undef LOADPTR
-#define	LOADPTR(reg,const32) \
-	  addis reg,r0,HIADJ(const32); addi reg,reg,LO(const32)
-
-.globl  early_init_f
-
-early_init_f:
-/* MPC8245/BMW CPCI System Init
- * Jimmy Blair, Broadcom Corp, 2002.
- */
-	mflr    r11
-	/* Zero-out registers */
-
-	addis	r0,r0,0
-	mtspr	SPRG0,r0
-	mtspr	SPRG1,r0
-	mtspr	SPRG2,r0
-	mtspr	SPRG3,r0
-
-	/* Set MPU/MSR to a known state. Turn on FP */
-
-	LOADPTR (r3, MSR_FP)
-	sync
-	mtmsr	r3
-	isync
-
-	/* Init the floating point control/status register */
-
-	mtfsfi	7,0x0
-	mtfsfi	6,0x0
-	mtfsfi	5,0x0
-	mtfsfi	4,0x0
-	mtfsfi	3,0x0
-	mtfsfi	2,0x0
-	mtfsfi	1,0x0
-	mtfsfi	0,0x0
-	isync
-
-	/* Set MPU/MSR to a known state. Turn off FP */
-
-#if 1	/* Turn off floating point (remove to keep FP on) */
-	andi.	r3, r3, 0
-	sync
-	mtmsr	r3
-	isync
-#endif
-
-	/* Init the Segment registers */
-
-	andi.	r3, r3, 0
-	isync
-	mtsr	0,r3
-	isync
-	mtsr	1,r3
-	isync
-	mtsr	2,r3
-	isync
-	mtsr	3,r3
-	isync
-	mtsr	4,r3
-	isync
-	mtsr	5,r3
-	isync
-	mtsr	6,r3
-	isync
-	mtsr	7,r3
-	isync
-	mtsr	8,r3
-	isync
-	mtsr	9,r3
-	isync
-	mtsr	10,r3
-	isync
-	mtsr	11,r3
-	isync
-	mtsr	12,r3
-	isync
-	mtsr	13,r3
-	isync
-	mtsr	14,r3
-	isync
-	mtsr	15,r3
-	isync
-
-	/* Turn off data and instruction cache control bits */
-
-	mfspr	r3, HID0
-	isync
-	rlwinm	r4, r3, 0, 18, 15	/* r4 has ICE and DCE bits cleared */
-	sync
-	isync
-	mtspr	HID0, r4		/* HID0 = r4 */
-	isync
-
-	/* Get cpu type */
-
-	mfspr	r28, PVR
-	rlwinm	r28, r28, 16, 16, 31
-
-	/* invalidate the MPU's data/instruction caches */
-
-	lis	r3, 0x0
-	cmpli	0, 0, r28, CPU_TYPE_603
-	beq	cpuIs603
-	cmpli	0, 0, r28, CPU_TYPE_603E
-	beq	cpuIs603
-	cmpli	0, 0, r28, CPU_TYPE_603P
-	beq	cpuIs603
-	cmpli	0, 0, r28, CPU_TYPE_604R
-	bne	cpuNot604R
-
-cpuIs604R:
-	lis	r3, 0x0
-	mtspr	HID0, r3		/* disable the caches */
-	isync
-	ori	r4, r4, 0x0002		/* disable BTAC by setting bit 30 */
-
-cpuNot604R:
-	ori	r3, r3, (HID0_ICFI |HID0_DCI)
-
-cpuIs603:
-	ori	r3, r3, (HID0_ICE | HID0_DCE)
-	or	r4, r4, r3		/* set bits */
-	sync
-	isync
-	mtspr	HID0, r4		/* HID0 = r4 */
-	andc	r4, r4, r3		/* clear bits */
-	isync
-	cmpli	0, 0, r28, CPU_TYPE_604
-	beq	cpuIs604
-	cmpli	0, 0, r28, CPU_TYPE_604E
-	beq	cpuIs604
-	cmpli	0, 0, r28, CPU_TYPE_604R
-	beq	cpuIs604
-	mtspr	HID0, r4
-	isync
-
-#ifdef USER_I_CACHE_ENABLE
-	b	instCacheOn603
-#else
-	b	cacheEnableDone
-#endif
-
-cpuIs604:
-	LOADPTR (r5, 0x1000)		/* loop count, 0x1000 */
-	mtspr	CTR, r5
-loopDelay:
-	nop
-	bdnz	loopDelay
-	isync
-	mtspr	HID0, r4
-	isync
-
-	/* turn the Instruction cache ON for faster FLASH ROM boots */
-
-#ifdef USER_I_CACHE_ENABLE
-
-	ori	r4, r4, (HID0_ICE | HID0_ICFI)
-	isync				/* Synchronize for ICE enable */
-	b	writeReg4
-instCacheOn603:
-	ori	r4, r4, (HID0_ICE | HID0_ICFI)
-	rlwinm	r3, r4, 0, 21, 19	/* clear the ICFI bit */
-
-	/*
-	 * The setting of the instruction cache enable (ICE) bit must be
-	 * preceded by an isync instruction to prevent the cache from being
-	 * enabled or disabled while an instruction access is in progress.
-	 */
-	isync
-writeReg4:
-	mtspr	HID0, r4		/* Enable Instr Cache & Inval cache */
-	cmpli	0, 0, r28, CPU_TYPE_604
-	beq	cacheEnableDone
-	cmpli	0, 0, r28, CPU_TYPE_604E
-	beq	cacheEnableDone
-
-	mtspr	HID0, r3		/* using 2 consec instructions */
-					/* PPC603 recommendation */
-#endif
-cacheEnableDone:
-
-	/* Detect map A or B */
-
-	addis	r5,r0, HI(CHRP_REG_ADDR)
-	addis	r6,r0, HI(CHRP_REG_DATA)
-	LOADPTR (r7, KAHLUA_ID)		/* Kahlua PCI controller ID */
-	LOADPTR (r8, BMC_BASE)
-
-	stwbrx	r8,0,(r5)
-	lwbrx	r3,0,(r6)		/* Store read value to r3 */
-	cmp	0,0,r3,r7
-	beq	cr0, X4_KAHLUA_START
-
-	/* It's not an 8240, is it an 8245? */
-
-	LOADPTR (r7, KAHLUA2_ID)	/* Kahlua PCI controller ID */
-	cmp	0,0,r3,r7
-	beq	cr0, X4_KAHLUA_START
-
-	/* Save the PCI controller type in r7 */
-	mr	r7, r3
-
-	LOADPTR (r5, PREP_REG_ADDR)
-	LOADPTR (r6, PREP_REG_DATA)
-
-X4_KAHLUA_START:
-	/* MPC8245 changes begin here */
-	LOADPTR (r3, MPC107_PCI_CMD)	/* PCI command reg */
-	stwbrx	r3,0,r5
-	li	r4, 6			/* Command register value */
-	sthbrx	r4, 0, r6
-
-	LOADPTR (r3, MPC107_PCI_STAT)	/* PCI status reg */
-	stwbrx	r3,0,r5
-	li	r4, -1			/* Write-to-clear all bits */
-	li	r3, 2			/* PCI_STATUS is at +2 offset */
-	sthbrx	r4, r3, r6
-
-	/*-------PROC_INT1_ADR */
-
-	LOADPTR (r3, PROC_INT1_ADR)	/* Processor I/F Config 1 reg. */
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0xff141b98)
-	stwbrx	r4,0,r6
-
-	/*-------PROC_INT2_ADR */
-
-	LOADPTR (r3, PROC_INT2_ADR)	/* Processor I/F Config 2 reg. */
-	stwbrx	r3,0,r5
-	lis	r4, 0x2000		/* Flush PCI config writes */
-	stwbrx	r4,0,r6
-
-	LOADPTR (r9, KAHLUA2_ID)
-	cmpl	0, 0, r7, r9
-	bne     L1not8245
-
-	/* MIOCR1 -- turn on bit for DLL delay */
-
-	LOADPTR (r3, MIOCR1_ADR_X)
-	stwbrx	r3,0,r5
-	li      r4, 0x04
-	stb	r4, MIOCR1_SHIFT(r6)
-
-	/* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
-	/* SDRAM_CLK_DEL (0x77)*/
-
-	LOADPTR (r3, MIOCR2_ADR_X)
-	stwbrx	r3,0,r5
-	li      r4, 0x10
-	stb	r4, MIOCR2_SHIFT(r6)
-
-	/* PMCR2 -- set PCI hold delay to <10>b for 33 MHz */
-
-	LOADPTR (r3, PMCR2_ADR_X)
-	stwbrx	r3,0,r5
-	li      r4, 0x20
-	stb	r4, PMCR2_SHIFT(r6)
-
-	/* Initialize EUMBBAR early since 8245 has internal UART in EUMB */
-
-	LOADPTR (r3, EUMBBAR)
-	stwbrx	r3,0,r5
-	LOADPTR (r4, CONFIG_SYS_EUMB_ADDR)
-	stwbrx	r4,0,r6
-
-L1not8245:
-
-	/* Toggle the DLL reset bit in AMBOR */
-
-	LOADPTR (r3, AMBOR)
-	stwbrx	r3,0,r5
-	lbz	r4, 0(r6)
-
-	andi.   r4, r4, 0xdf
-	stb	r4, 0(r6)		/* Clear DLL_RESET */
-	sync
-
-	ori     r4, r4, 0x20		/* Set DLL_RESET */
-	stb	r4, 0(r6)
-	sync
-
-	andi.   r4, r4, 0xdf
-	stb	r4, 0(r6)		/* Clear DLL_RESET */
-
-
-	/* Enable RCS2, use supplied timings */
-	LOADPTR (r3, ERCR1)
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0x80408000)
-	stwbrx	r4,0,r6
-
-	/* Disable RCS3 parameters */
-	LOADPTR (r3, ERCR2)
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0x00000000)
-	stwbrx	r4,0,r6
-
-	/* RCS3 at 0x70000000, 64KBytes */
-	LOADPTR (r3, ERCR2)
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0x00000004)
-	stwbrx	r4,0,r6
-
-	/*-------MCCR1 */
-
-#ifdef INCLUDE_ECC
-#define MC_ECC				1
-#else /* INCLUDE_ECC */
-#define MC_ECC				0
-#endif /* INCLUDE_ECC */
-
-#define MC1_ROMNAL			8		/* 0-15 */
-#define MC1_ROMFAL			11		/* 0-31 */
-#define MC1_DBUS_SIZE			0		/* 0-3, read only */
-#define MC1_BURST			0		/* 0-1 */
-#define MC1_MEMGO			0		/* 0-1 */
-#define MC1_SREN			1		/* 0-1 */
-#define MC1_RAM_TYPE			0		/* 0-1 */
-#define MC1_PCKEN			MC_ECC		/* 0-1 */
-#define MC1_BANKBITS			0x5555		/* 2 bits/bank 7-0 */
-
-	LOADPTR (r3, MEM_CONT1_ADR)	/* Set MCCR1 (F0) */
-	stwbrx	r3,0,r5
-	LOADPTR(r4, \
-		MC1_ROMNAL << 28 | MC1_ROMFAL << 23 | \
-		MC1_DBUS_SIZE << 21 | MC1_BURST << 20 | \
-		MC1_MEMGO << 19 | MC1_SREN << 18 | \
-		MC1_RAM_TYPE << 17 | MC1_PCKEN << 16 )
-	li	r3, MC1_BANKBITS
-	cmpl	0, 0, r7, r9		/* Check for Kahlua2 */
-	bne     BankBitsAdd
-	cmpli   0, 0, r3, 0x5555
-	beq     K2BankBitsHack		/* On 8245, 5555 ==> 0 */
-BankBitsAdd:
-	ori	r4, r3, 0
-K2BankBitsHack:
-	stwbrx	r4, 0, r6
-
-	/*------- MCCR2 */
-
-#define MC2_TS_WAIT_TIMER		0		/* 0-7 */
-#define MC2_ASRISE			8		/* 0-15 */
-#define MC2_ASFALL			4		/* 0-15 */
-#define MC2_INLINE_PAR_NOT_ECC		0		/* 0-1 */
-#define MC2_WRITE_PARITY_CHK_EN		MC_ECC		/* 0-1 */
-#define MC2_INLRD_PARECC_CHK_EN		MC_ECC		/* 0-1 */
-#define MC2_ECC_EN			0		/* 0-1 */
-#define MC2_EDO				0		/* 0-1 */
-/*
-*  N.B. This refresh interval looks good up to 85 MHz with Hynix SDRAM.
-*  May need to be decreased for 100 MHz
-*/
-#define MC2_REFINT			0x3a5		/* 0-0x3fff */
-#define MC2_RSV_PG			0		/* 0-1 */
-#define MC2_RMW_PAR			MC_ECC		/* 0-1 */
-
-	LOADPTR (r3, MEM_CONT2_ADR)	/* Set MCCR2 (F4) */
-	stwbrx	r3,0,r5
-	LOADPTR(r4, \
-		MC2_TS_WAIT_TIMER << 29 | MC2_ASRISE << 25 | \
-		MC2_ASFALL << 21 | MC2_INLINE_PAR_NOT_ECC << 20 | \
-		MC2_WRITE_PARITY_CHK_EN << 19 | \
-		MC2_INLRD_PARECC_CHK_EN << 18 | \
-		MC2_ECC_EN << 17 | MC2_EDO << 16 | \
-		MC2_REFINT << 2 | MC2_RSV_PG << 1 | MC2_RMW_PAR)
-	cmpl	0, 0, r7, r9		/* Check for Kahlua2 */
-	bne     notK2
-	/* clear Kahlua2 reserved bits */
-	LOADPTR (r3, 0xfffcffff)
-	and	r4, r4, r3
-notK2:
-	stwbrx	r4,0,r6
-
-	/*------- MCCR3 */
-
-#define MC_BSTOPRE			0x079		/* 0-0x7ff */
-
-#define MC3_BSTOPRE_U			(MC_BSTOPRE >> 4 & 0xf)
-#define MC3_REFREC			8		/* 0-15 */
-#define MC3_RDLAT			(4+MC_ECC)	/* 0-15 */
-#define MC3_CPX				0		/* 0-1 */
-#define MC3_RAS6P			0		/* 0-15 */
-#define MC3_CAS5			0		/* 0-7 */
-#define MC3_CP4				0		/* 0-7 */
-#define MC3_CAS3			0		/* 0-7 */
-#define MC3_RCD2			0		/* 0-7 */
-#define MC3_RP1				0		/* 0-7 */
-
-	LOADPTR (r3, MEM_CONT3_ADR)	/* Set MCCR3 (F8) */
-	stwbrx	r3,0,r5
-	LOADPTR(r4, \
-		MC3_BSTOPRE_U << 28 | MC3_REFREC << 24 | \
-		MC3_RDLAT << 20 | MC3_CPX << 19 | \
-		MC3_RAS6P << 15 | MC3_CAS5 << 12 | MC3_CP4 << 9 | \
-		MC3_CAS3 << 6 | MC3_RCD2 << 3 | MC3_RP1)
-	cmpl	0, 0, r7, r9              /* Check for Kahlua2 */
-	bne     notK2b
-	/* clear Kahlua2 reserved bits */
-	LOADPTR (r3, 0xff000000)
-	and	r4, r4, r3
-notK2b:
-	stwbrx	r4,0,r6
-
-	/*------- MCCR4 */
-
-#define MC4_PRETOACT			3		/* 0-15 */
-#define MC4_ACTOPRE			5		/* 0-15 */
-#define MC4_WMODE			0		/* 0-1 */
-#define MC4_INLINE			MC_ECC		/* 0-1 */
-#define MC4_REGISTERED			(1-MC_ECC)	/* 0-1 */
-#define MC4_BSTOPRE_UU			(MC_BSTOPRE >> 8 & 3)
-#define MC4_REGDIMM			0		/* 0-1 */
-#define MC4_SDMODE_CAS			2		/* 0-7 */
-#define MC4_DBUS_RCS1			1		/* 0-1, 8-bit */
-#define MC4_SDMODE_WRAP			0		/* 0-1 */
-#define MC4_SDMODE_BURST		2		/* 0-7 */
-#define MC4_ACTORW			3		/* 0-15 */
-#define MC4_BSTOPRE_L			(MC_BSTOPRE & 0xf)
-
-	LOADPTR (r3, MEM_CONT4_ADR)	/* Set MCCR4 (FC) */
-	stwbrx	r3,0,r5
-	LOADPTR(r4, \
-		MC4_PRETOACT << 28 | MC4_ACTOPRE << 24 | \
-		MC4_WMODE << 23 | MC4_INLINE << 22 | \
-		MC4_REGISTERED << 20 | MC4_BSTOPRE_UU << 18 | \
-		MC4_DBUS_RCS1 << 17 | \
-		MC4_REGDIMM << 15 | MC4_SDMODE_CAS << 12 | \
-		MC4_SDMODE_WRAP << 11 | MC4_SDMODE_BURST << 8 | \
-		MC4_ACTORW << 4 | MC4_BSTOPRE_L)
-	cmpl	0, 0, r7, r9                /* Check for Kahlua 2 */
-	bne     notK2c
-	/* Turn on Kahlua2 extended ROM space */
-	LOADPTR (r3, 0x00200000)
-	or	r4, r4, r3
-notK2c:
-	stwbrx	r4,0,r6
-
-#ifdef INCLUDE_ECC
-	/*------- MEM_ERREN1 */
-
-	LOADPTR (r3, MEM_ERREN1_ADR)	/* Set MEM_ERREN1 (c0) */
-	stwbrx	r3,0,r5
-	lwbrx	r4,0,r6
-	ori	r4,r4,4			/* Set MEM_PERR_EN */
-	stwbrx	r4,0,r6
-#endif /* INCLUDE_ECC */
-
-	/*------- MSAR/MEAR */
-
-	LOADPTR (r3, MEM_START1_ADR)	/* Set MSAR1 (80) */
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0xc0804000)
-	stwbrx	r4,0,r6
-
-	LOADPTR (r3, MEM_START2_ADR)	/* Set MSAR2 (84) */
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0xc0804000)
-	stwbrx	r4,0,r6
-
-	LOADPTR (r3, XMEM_START1_ADR)	/* Set MESAR1 (88) */
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0x00000000)
-	stwbrx	r4,0,r6
-
-	LOADPTR (r3, XMEM_START2_ADR)	/* Set MESAR2 (8c) */
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0x01010101)
-	stwbrx	r4,0,r6
-
-	LOADPTR (r3, MEM_END1_ADR)	/* Set MEAR1 (90) */
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0xffbf7f3f)
-	stwbrx	r4,0,r6
-
-	LOADPTR (r3, MEM_END2_ADR)	/* Set MEAR2 (94) */
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0xffbf7f3f)
-	stwbrx	r4,0,r6
-
-	LOADPTR (r3, XMEM_END1_ADR)	/* MEEAR1 (98) */
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0x00000000)
-	stwbrx	r4,0,r6
-
-	LOADPTR (r3, XMEM_END2_ADR)	/* MEEAR2 (9c) */
-	stwbrx	r3,0,r5
-	LOADPTR (r4, 0x01010101)
-	stwbrx	r4,0,r6
-
-	/*-------ODCR */
-
-	LOADPTR (r3, ODCR_ADR_X)	/* Set ODCR */
-	stwbrx	r3,0,r5
-
-	li	r4, 0x7f
-	stb	r4, ODCR_SHIFT(r6)	/* ODCR is at +3 offset */
-
-	/*-------MBEN */
-
-	LOADPTR (r3, MEM_EN_ADR)	/* Set MBEN (a0) */
-	stwbrx	r3,0,r5
-	li	r4, 0x01		/* Enable bank 0 */
-	stb	r4, 0(r6)		/* MBEN is at +0 offset */
-
-#if 0   /* Jimmy:  I think page made is broken */
-	/*-------PGMAX */
-
-	LOADPTR (r3, MPM_ADR_X)
-	stwbrx	r3,0,r5
-	li	r4, 0x32
-	stb	r4, MPM_SHIFT(r6)		/* PAGE_MODE is at +3 offset */
-#endif
-
-	/* Wait before initializing other registers */
-
-	lis	r4,0x0001
-	mtctr	r4
-
-KahluaX4wait200us:
-	bdnz	KahluaX4wait200us
-
-	/* Set MEMGO bit */
-
-	LOADPTR (r3, MEM_CONT1_ADR)	/* MCCR1 (F0) |= PGMAX */
-	stwbrx	r3,0,r5
-	lwbrx	r4,0,r6			/* old MCCR1 */
-	oris	r4,r4,0x0008		/* MEMGO=1 */
-	stwbrx	r4, 0, r6
-
-	/* Wait again */
-
-	addis	r4,r0,0x0002
-	ori	r4,r4,0xffff
-
-	mtctr	r4
-
-KahluaX4wait8ref:
-	bdnz	KahluaX4wait8ref
-
-	sync
-	eieio
-	mtlr    r11
-	blr
-
-#else /* USE_V2_INIT */
-
-
-/* U-Boot works, but memory will not run reliably for all address ranges.
- * Early U-Boot Working init, but 2.4.19 kernel will crash since memory is not
- * initialized correctly. Could work if debugged.
- */
-/* PCI Support routines */
-
-    .globl __pci_config_read_32
-__pci_config_read_32:
-    lis     r4, 0xfec0
-    stwbrx   r3, r0, r4
-    sync
-    lis     r4, 0xfee0
-    lwbrx   r3, 0, r4
-    blr
-    .globl __pci_config_read_16
-__pci_config_read_16:
-    lis     r4, 0xfec0
-    andi.    r5, r3, 2
-    stwbrx  r3, r0, r4
-    sync
-    oris     r4, r5, 0xfee0
-    lhbrx    r3, r0, r4
-    blr
-    .globl __pci_config_read_8
-__pci_config_read_8:
-    lis     r4, 0xfec0
-    andi.    r5, r3, 3
-    stwbrx  r3, r0, r4
-    sync
-    oris     r4, r5, 0xfee0
-    lbz      r3, 0(4)
-    blr
-    .globl __pci_config_write_32
-__pci_config_write_32:
-    lis     r5, 0xfec0
-    stwbrx   r3, r0, r5
-    sync
-    lis      r5, 0xfee0
-    stwbrx   r4, r0, r5
-    sync
-    blr
-    .globl __pci_config_write_16
-__pci_config_write_16:
-    lis     r5, 0xfec0
-    andi.    r6, r3, 2
-    stwbrx  r3, r0, 5
-    sync
-    oris     r5, r6, 0xfee0
-    sthbrx    r4, r0, r5
-    sync
-    blr
-    .globl __pci_config_write_8
-__pci_config_write_8:
-    lis      r5, 0xfec0
-    andi.    r6, r3, 3
-    stwbrx   r3, r0, r5
-    sync
-    oris      r5, r6, 0xfee0
-    stb       r4, 0(r5)
-    sync
-    blr
-    .globl  in_8
-in_8:
-    oris    r3, r3, 0xfe00
-    lbz     r3,0(r3)
-    blr
-    .globl  in_16
-in_16:
-    oris    r3, r3, 0xfe00
-    lhbrx   r3, 0, r3
-    blr
-    .globl in_16_ne
-in_16_ne:
-    oris    r3, r3, 0xfe00
-    lhzx    r3, 0, r3
-    blr
-    .globl  in_32
-in_32:
-    oris    r3, r3, 0xfe00
-    lwbrx   r3, 0, r3
-    blr
-    .globl  out_8
-out_8:
-    oris    r3, r3, 0xfe00
-    stb     r4, 0(r3)
-    eieio
-    blr
-    .globl  out_16
-out_16:
-    oris    r3, r3, 0xfe00
-    sthbrx  r4, 0, r3
-    eieio
-    blr
-    .globl  out_16_ne
-out_16_ne:
-    oris    r3, r3, 0xfe00
-    sth     r4, 0(r3)
-    eieio
-    blr
-    .globl  out_32
-out_32:
-    oris    r3, r3, 0xfe00
-    stwbrx  r4, 0, r3
-    eieio
-    blr
-    .globl  read_8
-read_8:
-    lbz     r3,0(r3)
-    blr
-    .globl  read_16
-read_16:
-    lhbrx   r3, 0, r3
-    blr
-    .globl  read_32
-read_32:
-    lwbrx   r3, 0, r3
-    blr
-    .globl  read_32_ne
-read_32_ne:
-    lwz     r3, 0(r3)
-    blr
-    .globl  write_8
-write_8:
-    stb     r4, 0(r3)
-    eieio
-    blr
-    .globl  write_16
-write_16:
-    sthbrx  r4, 0, r3
-    eieio
-    blr
-    .globl  write_32
-write_32:
-    stwbrx  r4, 0, r3
-    eieio
-    blr
-    .globl  write_32_ne
-write_32_ne:
-    stw     r4, 0(r3)
-    eieio
-    blr
-
-
-.globl  early_init_f
-
-early_init_f:
-	mflr    r11
-	lis     r10, 0x8000
-
-	/* PCI Latency Timer */
-	li      r4, 0x0d
-	ori     r3, r10, PLTR@l
-	bl      __pci_config_write_8
-
-	/* Cache Line Size */
-	li      r4, 0x08
-	ori     r3, r10, PCLSR@l
-	bl      __pci_config_write_8
-
-	/* PCI Cmd */
-	li      r4, 6
-	ori     r3, r10, PCICR@l
-	bl      __pci_config_write_16
-
-#if 1
-	/* PCI Stat */
-	ori     r3, r10, PCISR@l
-	bl      __pci_config_read_16
-	ori     r4, r4, 0xffff
-	ori     r3, r10, PCISR@l
-	bl      __pci_config_write_16
-#endif
-
-	/* PICR1 */
-	lis     r4, 0xff14
-	ori     r4, r4, 0x1b98
-	ori     r3, r10, PICR1@l
-	bl      __pci_config_write_32
-
-
-	/* PICR2 */
-	lis     r4, 0x0404
-	ori     r4, r4, 0x0004
-	ori     r3, r10, PICR2@l
-	bl      __pci_config_write_32
-
-	/* MIOCR1 */
-	li      r4, 0x04
-	ori     r3, r10, MIOCR1@l
-	bl      __pci_config_write_8
-
-	/* For the MPC8245, set register 77 to %00100000 (see Errata #15) */
-	/* SDRAM_CLK_DEL (0x77)*/
-	li      r4, 0x10
-	ori     r3, r10, MIOCR2@l
-	bl      __pci_config_write_8
-
-	/* EUMBBAR */
-	lis     r4, 0xfc00
-	ori     r3, r10, EUMBBAR@l
-	bl      __pci_config_write_32
-
-	/* AMBOR */
-
-       /* Even if Address Map B is not being used (though it should),
-	* the memory DLL needs to be cleared/set/cleared before using memory.
-	*/
-
-	ori     r3, r10, AMBOR@l
-	bl      __pci_config_read_8	/* get Current bits */
-
-	andi.   r4, r4, 0xffdf
-	ori     r3, r10, AMBOR@l
-	bl      __pci_config_write_16	/* Clear DLL_RESET */
-
-	ori    r4, r4, 0x0020
-	ori     r3, r10, AMBOR@l
-	bl      __pci_config_write_16	/* Set DLL_RESET */
-
-	andi.   r4, r4, 0xffdf
-	ori     r3, r10, AMBOR@l
-	bl      __pci_config_write_16	/* Clear DLL_RESET */
-
-	/* ERCR1 */
-	lis     r4, 0x8040		/* Enable RCS2, use supplied timings */
-	ori     r4, r4, 0x8000
-	ori     r3, r10, ERCR1@l
-	bl      __pci_config_write_32
-
-	/* ERCR2 */
-	lis     r4, 0x0000		/* Disable RCS3 parms */
-	ori     r4, r4, 0x0000
-	ori     r3, r10, ERCR2@l
-	bl      __pci_config_write_32
-
-	/* ERCR3 */
-	lis     r4, 0x0000		/* RCS3 at 0x70000000, 64K bytes */
-	ori     r4, r4, 0x0004
-	ori     r3, r10, ERCR2@l
-	bl      __pci_config_write_32
-
-	/* Preserve memgo bit */
-	/* MCCR1 */
-
-/*	lis     r4, 0x75a8		/  Safe Local ROM = 11+3 clocks */
-	lis     r4, 0x75a0              /* Safe Local ROM = 11+3 clocks */
-/*      lis     r4, 0x73a0              /  Fast Local ROM = 7+3 clocks */
-/*      oris    r4, r4, 0x0010          /  Burst ROM/Flash enable */
-/*      oris    r4, r4, 0x0004          /  Self-refresh enable */
-
-/*      ori     r4,r4,0xFFFF            /  16Mbit  2bank SDRAM */
-/*      ori     r4,r4,0xAAAA            /  256Mbit 4bank SDRAM (8245 only) */
-/*      ori     r4,r4,0x5555            /  64Mbit  2bank SDRAM */
-	ori     r4,r4,0x0000            /* 64Mbit  4bank SDRAM */
-
-	ori     r3, r10, MCCR1@l
-	bl      __pci_config_write_32
-
-	/* MCCR2 */
-
-	lis     r4,0x0000
-/*      oris    r4,r4,0x4000            /  TS_WAIT_TIMER = 3 clocks */
-	oris    r4,r4,0x1000            /* ASRISE = 8 clocks */
-	oris    r4,r4,0x0080            /* ASFALL = 8 clocks */
-/*      oris    r4,r4,0x0010            /  SDRAM Parity (else ECC) */
-/*      oris    r4,r4,0x0008            /  Write parity check */
-/*      oris    r4,r4,0x0004            /  SDRAM inline reads */
-
-
-/* Select a refresh rate; it needs to match the bus speed; if too */
-/* slow, data may be lost; if too fast, performance is lost.  We */
-/* use the fastest value so we run at all speeds. */
-/* Refresh = (15600ns/busclk) - (213 (see UM)). */
-
-/*      ori     r4,r4,0x1d2c            /  133 MHz mem bus        = 1867 */
-/*      ori     r4,r4,0x150c            /  100 MHz mem bus        = 1347 */
-/*      ori     r4,r4,0x10fc            /   83 MHz mem bus        = 1087 */
-/*      ori     r4,r4,0x0cc4            /   66 MHz mem bus        =  817 */
-	ori     r4,r4,0x04cc            /*  33 MHz mem bus (SAFE) =  307 */
-/*      ori     r4,r4,0x0002            /  Reserve a page */
-/*      ori     r4,r4,0x0001            /  RWM parity */
-
-	ori     r3, r10, MCCR2@l
-	bl      __pci_config_write_32
-
-
-	/* MCCR3 */
-	lis     r4,0x0000               /* BSTOPRE_M = 7 (see A/N) */
-	oris    r4,r4,0x0500            /* REFREC    = 8 clocks */
-	ori     r3, r10, MCCR3@l
-	bl      __pci_config_write_32
-
-	/* MCCR4 */                     /* Turn on registered buffer mode */
-	lis     r4, 0x2000              /* PRETOACT = 3 clocks */
-	oris    r4,r4,0x0400            /* ACTOPRE  = 5 clocks */
-/*      oris    r4,r4,0x0080            /  Enable 8-beat burst (32-bit bus) */
-/*      oris    r4,r4,0x0040            /  Enable Inline ECC/Parity */
-	oris    r4,r4,0x0020            /* EXTROM enabled */
-	oris    r4,r4,0x0010            /* Registered buffers */
-/*      oris    r4,r4,0x0000            /  BSTOPRE_U = 0 (see A/N) */
-	oris    r4,r4,0x0002            /* DBUS_SIZ[2] (8 bit on RCS1) */
-
-/*      ori     r4,r4,0x8000            /  Registered DIMMs */
-	ori     r4,r4,0x2000            /*CAS Latency (CL=3) (see RDLAT) */
-/*      ori     r4,r4,0x2000            /  CAS Latency (CL=2) (see RDLAT) */
-/*      ori     r4,r4,0x0300            /  Sequential wrap/8-beat burst */
-	ori     r4,r4,0x0200            /* Sequential wrap/4-beat burst */
-	ori     r4,r4,0x0030            /* ACTORW  = 3 clocks */
-	ori     r4,r4,0x0009            /* BSTOPRE_L = 9 (see A/N) */
-
-	ori     r3, r10, MCCR4@l
-	bl      __pci_config_write_32
-
-	/* MSAR1 */
-	lis     r4, 0xc0804000@h
-	ori     r4, r4, 0xc0804000@l
-	ori     r3, r10, MSAR1@l
-	bl      __pci_config_write_32
-
-	/* MSAR2 */
-	lis     r4, 0xc0804000@h
-	ori     r4, r4, 0xc0804000@l
-	ori     r3, r10, MSAR2@l
-	bl      __pci_config_write_32
-
-	/* MESAR1 */
-	lis     r4, 0x00000000@h
-	ori     r4, r4, 0x00000000@l
-	ori     r3, r10, EMSAR1@l
-	bl      __pci_config_write_32
-
-	/* MESAR2 */
-	lis     r4, 0x01010101@h
-	ori     r4, r4, 0x01010101@l
-	ori     r3, r10, EMSAR2@l
-	bl      __pci_config_write_32
-
-	/* MEAR1 */
-	lis     r4, 0xffbf7f3f@h
-	ori     r4, r4, 0xffbf7f3f@l
-	ori     r3, r10, MEAR1@l
-	bl      __pci_config_write_32
-
-	/* MEAR2 */
-	lis     r4, 0xffbf7f3f@h
-	ori     r4, r4, 0xffbf7f3f@l
-	ori     r3, r10, MEAR2@l
-	bl      __pci_config_write_32
-
-	/* MEEAR1 */
-	lis     r4, 0x00000000@h
-	ori     r4, r4, 0x00000000@l
-	ori     r3, r10, EMEAR1@l
-	bl      __pci_config_write_32
-
-	/* MEEAR2 */
-	lis     r4, 0x01010101@h
-	ori     r4, r4, 0x01010101@l
-	ori     r3, r10, EMEAR2@l
-	bl      __pci_config_write_32
-
-	/* ODCR */
-	li      r4, 0x7f
-	ori     r3, r10, ODCR@l
-	bl      __pci_config_write_8
-
-	/* MBER */
-	li      r4, 0x01
-	ori     r3, r10, MBER@l
-	bl      __pci_config_write_8
-
-	/* Page CTR aka PGMAX */
-	li      r4, 0x32
-	ori     r3, r10, 0x70
-	bl      __pci_config_write_8
-
-#if 0
-	/* CLK Drive */
-	ori     r4, r10, 0xfc01 /* Top bit will be ignored */
-	ori     r3, r10, 0x74
-	bl      __pci_config_write_16
-#endif
-
-	/* delay */
-	lis     r7, 1
-	mtctr   r7
-label1:	bdnz    label1
-
-	/* Set memgo bit */
-	/* MCCR1 */
-	ori     r3, r10, MCCR1@l
-	bl      __pci_config_read_32
-	lis	r7, 0x0008
-	or	r4, r3, r7
-	ori     r3, r10, MCCR1@l
-	bl      __pci_config_write_32
-
-	/* delay again */
-	lis     r7, 1
-	mtctr   r7
-label2:	bdnz    label2
-#if 0
-/* DEBUG: Infinite loop, write then read */
-loop:
-	lis     r7, 0xffff
-	mtctr   r7
-	li	r3, 0x5004
-	lis	r4, 0xa0a0
-	ori	r4, r4, 0x5050
-	bl write_32_ne
-	li	r3, 0x5004
-	bl read_32_ne
-	bdnz    loop
-#endif
-	mtlr    r11
-	blr
-#endif
diff --git a/board/bmw/flash.c b/board/bmw/flash.c
deleted file mode 100644
index 57ffe08..0000000
--- a/board/bmw/flash.c
+++ /dev/null
@@ -1,779 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc824x.h>
-#include <asm/processor.h>
-#include <asm/pci_io.h>
-
-#define ROM_CS0_START	0xFF800000
-#define ROM_CS1_START	0xFF000000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];	/* info for FLASH chips    */
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef  CONFIG_ENV_ADDR
-#  define CONFIG_ENV_ADDR  (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE  CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef  CONFIG_ENV_SECT_SIZE
-#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data);
-
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t * info);
-#endif /* 0 */
-
-/*flash command address offsets*/
-
-#if 0
-#define ADDR0           (0x555)
-#define ADDR1           (0x2AA)
-#define ADDR3           (0x001)
-#else
-#define ADDR0		(0xAAA)
-#define ADDR1		(0x555)
-#define ADDR3		(0x001)
-#endif
-
-#define FLASH_WORD_SIZE unsigned char
-
-/*-----------------------------------------------------------------------
- */
-
-#if 0
-static int byte_parity_odd (unsigned char x) __attribute__ ((const));
-#endif /* 0 */
-static unsigned long flash_id (unsigned char mfct, unsigned char chip)
-	__attribute__ ((const));
-
-typedef struct {
-	FLASH_WORD_SIZE extval;
-	unsigned short intval;
-} map_entry;
-
-#if 0
-static int byte_parity_odd (unsigned char x)
-{
-	x ^= x >> 4;
-	x ^= x >> 2;
-	x ^= x >> 1;
-	return (x & 0x1) != 0;
-}
-#endif /* 0 */
-
-
-static unsigned long flash_id (unsigned char mfct, unsigned char chip)
-{
-	static const map_entry mfct_map[] = {
-		{(FLASH_WORD_SIZE) AMD_MANUFACT,
-		 (unsigned short) ((unsigned long) FLASH_MAN_AMD >> 16)},
-		{(FLASH_WORD_SIZE) FUJ_MANUFACT,
-		 (unsigned short) ((unsigned long) FLASH_MAN_FUJ >> 16)},
-		{(FLASH_WORD_SIZE) STM_MANUFACT,
-		 (unsigned short) ((unsigned long) FLASH_MAN_STM >> 16)},
-		{(FLASH_WORD_SIZE) MT_MANUFACT,
-		 (unsigned short) ((unsigned long) FLASH_MAN_MT >> 16)},
-		{(FLASH_WORD_SIZE) INTEL_MANUFACT,
-		 (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)},
-		{(FLASH_WORD_SIZE) INTEL_ALT_MANU,
-		 (unsigned short) ((unsigned long) FLASH_MAN_INTEL >> 16)}
-	};
-
-	static const map_entry chip_map[] = {
-		{AMD_ID_F040B, FLASH_AM040},
-		{(FLASH_WORD_SIZE) STM_ID_x800AB, FLASH_STM800AB}
-	};
-
-	const map_entry *p;
-	unsigned long result = FLASH_UNKNOWN;
-
-	/* find chip id */
-	for (p = &chip_map[0];
-	     p < &chip_map[sizeof chip_map / sizeof chip_map[0]]; p++)
-		if (p->extval == chip) {
-			result = FLASH_VENDMASK | p->intval;
-			break;
-		}
-
-	/* find vendor id */
-	for (p = &mfct_map[0];
-	     p < &mfct_map[sizeof mfct_map / sizeof mfct_map[0]]; p++)
-		if (p->extval == mfct) {
-			result &= ~FLASH_VENDMASK;
-			result |= (unsigned long) p->intval << 16;
-			break;
-		}
-
-	return result;
-}
-
-
-unsigned long flash_init (void)
-{
-	unsigned long i;
-	unsigned char j;
-	static const ulong flash_banks[] = CONFIG_SYS_FLASH_BANKS;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		flash_info_t *const pflinfo = &flash_info[i];
-
-		pflinfo->flash_id = FLASH_UNKNOWN;
-		pflinfo->size = 0;
-		pflinfo->sector_count = 0;
-	}
-
-	for (i = 0; i < sizeof flash_banks / sizeof flash_banks[0]; i++) {
-		flash_info_t *const pflinfo = &flash_info[i];
-		const unsigned long base_address = flash_banks[i];
-		volatile FLASH_WORD_SIZE *const flash =
-			(FLASH_WORD_SIZE *) base_address;
-#if 0
-		volatile FLASH_WORD_SIZE *addr2;
-#endif
-#if 0
-		/* write autoselect sequence */
-		flash[0x5555] = 0xaa;
-		flash[0x2aaa] = 0x55;
-		flash[0x5555] = 0x90;
-#else
-		flash[0xAAA << (3 * i)] = 0xaa;
-		flash[0x555 << (3 * i)] = 0x55;
-		flash[0xAAA << (3 * i)] = 0x90;
-#endif
-		__asm__ __volatile__ ("sync");
-
-#if 0
-		pflinfo->flash_id = flash_id (flash[0x0], flash[0x1]);
-#else
-		pflinfo->flash_id =
-			flash_id (flash[0x0], flash[0x2 + 14 * i]);
-#endif
-
-		switch (pflinfo->flash_id & FLASH_TYPEMASK) {
-		case FLASH_AM040:
-			pflinfo->size = 0x00080000;
-			pflinfo->sector_count = 8;
-			for (j = 0; j < 8; j++) {
-				pflinfo->start[j] =
-					base_address + 0x00010000 * j;
-				pflinfo->protect[j] = flash[(j << 16) | 0x2];
-			}
-			break;
-		case FLASH_STM800AB:
-			pflinfo->size = 0x00100000;
-			pflinfo->sector_count = 19;
-			pflinfo->start[0] = base_address;
-			pflinfo->start[1] = base_address + 0x4000;
-			pflinfo->start[2] = base_address + 0x6000;
-			pflinfo->start[3] = base_address + 0x8000;
-			for (j = 1; j < 16; j++) {
-				pflinfo->start[j + 3] =
-					base_address + 0x00010000 * j;
-			}
-#if 0
-			/* check for protected sectors */
-			for (j = 0; j < pflinfo->sector_count; j++) {
-				/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-				/* D0 = 1 if protected */
-				addr2 = (volatile FLASH_WORD_SIZE
-					 *) (pflinfo->start[j]);
-				if (pflinfo->flash_id & FLASH_MAN_SST)
-					pflinfo->protect[j] = 0;
-				else
-					pflinfo->protect[j] = addr2[2] & 1;
-			}
-#endif
-			break;
-		}
-		/* Protect monitor and environment sectors
-		 */
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-		flash_protect (FLAG_PROTECT_SET,
-			       CONFIG_SYS_MONITOR_BASE,
-			       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1,
-			       &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-		flash_protect (FLAG_PROTECT_SET,
-			       CONFIG_ENV_ADDR,
-			       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1,
-			       &flash_info[0]);
-#endif
-
-		/* reset device to read mode */
-		flash[0x0000] = 0xf0;
-		__asm__ __volatile__ ("sync");
-	}
-
-	return flash_info[0].size + flash_info[1].size;
-}
-
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_MAN_SST) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type    */
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	} else {
-		/* set sector offsets for top boot block type       */
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	}
-
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	static const char unk[] = "Unknown";
-	const char *mfct = unk, *type = unk;
-	unsigned int i;
-
-	if (info->flash_id != FLASH_UNKNOWN) {
-		switch (info->flash_id & FLASH_VENDMASK) {
-		case FLASH_MAN_AMD:
-			mfct = "AMD";
-			break;
-		case FLASH_MAN_FUJ:
-			mfct = "FUJITSU";
-			break;
-		case FLASH_MAN_STM:
-			mfct = "STM";
-			break;
-		case FLASH_MAN_SST:
-			mfct = "SST";
-			break;
-		case FLASH_MAN_BM:
-			mfct = "Bright Microelectonics";
-			break;
-		case FLASH_MAN_INTEL:
-			mfct = "Intel";
-			break;
-		}
-
-		switch (info->flash_id & FLASH_TYPEMASK) {
-		case FLASH_AM040:
-			type = "AM29F040B (512K * 8, uniform sector size)";
-			break;
-		case FLASH_AM400B:
-			type = "AM29LV400B (4 Mbit, bottom boot sect)";
-			break;
-		case FLASH_AM400T:
-			type = "AM29LV400T (4 Mbit, top boot sector)";
-			break;
-		case FLASH_AM800B:
-			type = "AM29LV800B (8 Mbit, bottom boot sect)";
-			break;
-		case FLASH_AM800T:
-			type = "AM29LV800T (8 Mbit, top boot sector)";
-			break;
-		case FLASH_AM160T:
-			type = "AM29LV160T (16 Mbit, top boot sector)";
-			break;
-		case FLASH_AM320B:
-			type = "AM29LV320B (32 Mbit, bottom boot sect)";
-			break;
-		case FLASH_AM320T:
-			type = "AM29LV320T (32 Mbit, top boot sector)";
-			break;
-		case FLASH_STM800AB:
-			type = "M29W800AB (8 Mbit, bottom boot sect)";
-			break;
-		case FLASH_SST800A:
-			type = "SST39LF/VF800 (8 Mbit, uniform sector size)";
-			break;
-		case FLASH_SST160A:
-			type = "SST39LF/VF160 (16 Mbit, uniform sector size)";
-			break;
-		}
-	}
-
-	printf ("\n  Brand: %s Type: %s\n"
-		"  Size: %lu KB in %d Sectors\n",
-		mfct, type, info->size >> 10, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-
-	for (i = 0; i < info->sector_count; i++) {
-		unsigned long size;
-		unsigned int erased;
-		unsigned long *flash = (unsigned long *) info->start[i];
-
-		/*
-		 * Check if whole sector is erased
-		 */
-		size = (i != (info->sector_count - 1)) ?
-			(info->start[i + 1] - info->start[i]) >> 2 :
-			(info->start[0] + info->size - info->start[i]) >> 2;
-
-		for (flash = (unsigned long *) info->start[i], erased = 1;
-		     (flash != (unsigned long *) info->start[i] + size)
-		     && erased; flash++)
-			erased = *flash == ~0x0UL;
-
-		printf ("%s %08lX %s %s",
-			(i % 5) ? "" : "\n   ",
-			info->start[i],
-			erased ? "E" : " ", info->protect[i] ? "RO" : "  ");
-	}
-
-	puts ("\n");
-	return;
-}
-
-#if 0
-
-/*
- * The following code cannot be run from FLASH!
- */
-ulong flash_get_size (vu_long * addr, flash_info_t * info)
-{
-	short i;
-	FLASH_WORD_SIZE value;
-	ulong base = (ulong) addr;
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
-
-	printf ("flash_get_size: \n");
-	/* Write auto select command: read Manufacturer ID */
-	eieio ();
-	addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAA;
-	addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55;
-	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90;
-	value = addr2[0];
-
-	switch (value) {
-	case (FLASH_WORD_SIZE) AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (FLASH_WORD_SIZE) FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (FLASH_WORD_SIZE) SST_MANUFACT:
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);	/* no or unknown flash  */
-	}
-	printf ("recognised manufacturer");
-
-	value = addr2[ADDR3];	/* device ID        */
-	debug ("\ndev_code=%x\n", value);
-
-	switch (value) {
-	case (FLASH_WORD_SIZE) AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;		/* => 0.5 MB        */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;		/* => 0.5 MB        */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;		/* => 1 MB      */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;		/* => 1 MB      */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;		/* => 2 MB      */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;		/* => 2 MB      */
-
-	case (FLASH_WORD_SIZE) SST_ID_xF800A:
-		info->flash_id += FLASH_SST800A;
-		info->sector_count = 16;
-		info->size = 0x00100000;
-		break;		/* => 1 MB      */
-
-	case (FLASH_WORD_SIZE) SST_ID_xF160A:
-		info->flash_id += FLASH_SST160A;
-		info->sector_count = 32;
-		info->size = 0x00200000;
-		break;		/* => 2 MB      */
-
-	case (FLASH_WORD_SIZE) AMD_ID_F040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00080000;
-		break;		/* => 0.5 MB      */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);	/* => no or unknown flash */
-
-	}
-
-	printf ("flash id %lx; sector count %x, size %lx\n", info->flash_id,
-		info->sector_count, info->size);
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_MAN_SST) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type    */
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	} else {
-		/* set sector offsets for top boot block type       */
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-		if (info->flash_id & FLASH_MAN_SST)
-			info->protect[i] = 0;
-		else
-			info->protect[i] = addr2[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr2 = (FLASH_WORD_SIZE *) info->start[0];
-		*addr2 = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-	}
-
-	return (info->size);
-}
-
-#endif
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-	unsigned char sh8b;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > (FLASH_MAN_STM | FLASH_AMD_COMP))) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Check the ROM CS */
-	if ((info->start[0] >= ROM_CS1_START)
-	    && (info->start[0] < ROM_CS0_START))
-		sh8b = 3;
-	else
-		sh8b = 0;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
-	addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
-	addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00800080;
-	addr[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
-	addr[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->
-								       start
-								       [sect]
-								       -
-								       info->
-								       start
-								       [0]) <<
-								      sh8b));
-			if (info->flash_id & FLASH_MAN_SST) {
-				addr[ADDR0 << sh8b] =
-					(FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1 << sh8b] =
-					(FLASH_WORD_SIZE) 0x00550055;
-				addr[ADDR0 << sh8b] =
-					(FLASH_WORD_SIZE) 0x00800080;
-				addr[ADDR0 << sh8b] =
-					(FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1 << sh8b] =
-					(FLASH_WORD_SIZE) 0x00550055;
-				addr[0] = (FLASH_WORD_SIZE) 0x00500050;	/* block erase */
-				udelay (30000);	/* wait 30 ms */
-			} else
-				addr[0] = (FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last = start;
-	addr = (FLASH_WORD_SIZE *) (info->start[0] + ((info->start[l_sect] -
-						       info->
-						       start[0]) << sh8b));
-	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
-	       (FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			serial_putc ('.');
-			last = now;
-		}
-	}
-
-      DONE:
-	/* reset to read mode */
-	addr = (FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_word (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) info->start[0];
-	volatile FLASH_WORD_SIZE *dest2;
-	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
-	ulong start;
-	int flag;
-	int i;
-	unsigned char sh8b;
-
-	/* Check the ROM CS */
-	if ((info->start[0] >= ROM_CS1_START)
-	    && (info->start[0] < ROM_CS0_START))
-		sh8b = 3;
-	else
-		sh8b = 0;
-
-	dest2 = (FLASH_WORD_SIZE *) (((dest - info->start[0]) << sh8b) +
-				     info->start[0]);
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*dest2 & (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
-		addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[ADDR1 << sh8b] = (FLASH_WORD_SIZE) 0x00550055;
-		addr2[ADDR0 << sh8b] = (FLASH_WORD_SIZE) 0x00A000A0;
-
-		dest2[i << sh8b] = data2[i];
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts ();
-
-		/* data polling for D7 */
-		start = get_timer (0);
-		while ((dest2[i << sh8b] & (FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-			if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-		}
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/bmw/m48t59y.c b/board/bmw/m48t59y.c
deleted file mode 100644
index 4e83b90..0000000
--- a/board/bmw/m48t59y.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
- *
- * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * The SGS M48 an 8K NVRAM starting at offset M48_BASE_ADDR and
- * continuing for 8176 bytes. After that starts the Time-Of-Day (TOD)
- * registers which are used to set/get the internal date/time functions.
- *
- * This module implements Y2K compliance by taking full year numbers
- * and translating back and forth from the TOD 2-digit year.
- *
- * NOTE: for proper interaction with an operating system, the TOD should
- * be used to store Universal Coordinated Time (GMT) and timezone
- * conversions should be used.
- *
- * Here is a diagram of the memory layout:
- *
- * +---------------------------------------------+ 0xffe0a000
- * | Non-volatile memory                         | .
- * |                                             | .
- * | (8176 bytes of Non-volatile memory)         | .
- * |                                             | .
- * +---------------------------------------------+ 0xffe0bff0
- * | Flags                                       |
- * +---------------------------------------------+ 0xffe0bff1
- * | Unused                                      |
- * +---------------------------------------------+ 0xffe0bff2
- * | Alarm Seconds                               |
- * +---------------------------------------------+ 0xffe0bff3
- * | Alarm Minutes                               |
- * +---------------------------------------------+ 0xffe0bff4
- * | Alarm Date                                  |
- * +---------------------------------------------+ 0xffe0bff5
- * | Interrupts                                  |
- * +---------------------------------------------+ 0xffe0bff6
- * | WatchDog                                    |
- * +---------------------------------------------+ 0xffe0bff7
- * | Calibration                                 |
- * +---------------------------------------------+ 0xffe0bff8
- * | Seconds                                     |
- * +---------------------------------------------+ 0xffe0bff9
- * | Minutes                                     |
- * +---------------------------------------------+ 0xffe0bffa
- * | Hours                                       |
- * +---------------------------------------------+ 0xffe0bffb
- * | Day                                         |
- * +---------------------------------------------+ 0xffe0bffc
- * | Date                                        |
- * +---------------------------------------------+ 0xffe0bffd
- * | Month                                       |
- * +---------------------------------------------+ 0xffe0bffe
- * | Year (2 digits only)                        |
- * +---------------------------------------------+ 0xffe0bfff
- */
-#include <common.h>
-#include <rtc.h>
-#include "bmw.h"
-
-/*
- * Imported from mousse.h:
- *
- *   TOD_REG_BASE		Base of m48t59y TOD registers
- *   SYS_TOD_UNPROTECT()	Disable NVRAM write protect
- *   SYS_TOD_PROTECT()		Re-enable NVRAM write protect
- */
-
-#define YEAR		0xf
-#define MONTH		0xe
-#define DAY		0xd
-#define DAY_OF_WEEK	0xc
-#define HOUR		0xb
-#define MINUTE		0xa
-#define SECOND		0x9
-#define CONTROL		0x8
-#define WATCH		0x7
-#define INTCTL		0x6
-#define WD_DATE		0x5
-#define WD_HOUR		0x4
-#define WD_MIN		0x3
-#define WD_SEC		0x2
-#define _UNUSED		0x1
-#define FLAGS		0x0
-
-#define M48_ADDR	((volatile unsigned char *) TOD_REG_BASE)
-
-int m48_tod_init(void)
-{
-    SYS_TOD_UNPROTECT();
-
-    M48_ADDR[CONTROL] = 0;
-    M48_ADDR[WATCH] = 0;
-    M48_ADDR[INTCTL] = 0;
-
-    /*
-     * If the oscillator is currently stopped (as on a new part shipped
-     * from the factory), start it running.
-     *
-     * Here is an example of the TOD bytes on a brand new M48T59Y part:
-     *		00 00 00 00 00 00 00 00 00 88 8c c3 bf c8 f5 01
-     */
-
-    if (M48_ADDR[SECOND] & 0x80)
-	M48_ADDR[SECOND] = 0;
-
-    /* Is battery low */
-    if ( M48_ADDR[FLAGS] & 0x10) {
-	 printf("NOTICE: Battery low on Real-Time Clock (replace SNAPHAT).\n");
-    }
-
-    SYS_TOD_PROTECT();
-
-    return 0;
-}
-
-/*
- * m48_tod_set
- */
-
-static int to_bcd(int value)
-{
-    return value / 10 * 16 + value % 10;
-}
-
-static int from_bcd(int value)
-{
-    return value / 16 * 10 + value % 16;
-}
-
-static int day_of_week(int y, int m, int d)	/* 0-6 ==> Sun-Sat */
-{
-    static int t[] = {0, 3, 2, 5, 0, 3, 5, 1, 4, 6, 2, 4};
-    y -= m < 3;
-    return (y + y/4 - y/100 + y/400 + t[m-1] + d) % 7;
-}
-
-/*
- * Note: the TOD should store the current GMT
- */
-
-int m48_tod_set(int year,		/* 1980-2079 */
-		int month,		/* 01-12 */
-		int day,		/* 01-31 */
-		int hour,		/* 00-23 */
-		int minute,		/* 00-59 */
-		int second)		/* 00-59 */
-
-{
-    SYS_TOD_UNPROTECT();
-
-    M48_ADDR[CONTROL] |= 0x80;	/* Set WRITE bit */
-
-    M48_ADDR[YEAR] = to_bcd(year % 100);
-    M48_ADDR[MONTH] = to_bcd(month);
-    M48_ADDR[DAY] = to_bcd(day);
-    M48_ADDR[DAY_OF_WEEK] = day_of_week(year, month, day) + 1;
-    M48_ADDR[HOUR] = to_bcd(hour);
-    M48_ADDR[MINUTE] = to_bcd(minute);
-    M48_ADDR[SECOND] = to_bcd(second);
-
-    M48_ADDR[CONTROL] &= ~0x80;	/* Clear WRITE bit */
-
-    SYS_TOD_PROTECT();
-
-    return 0;
-}
-
-/*
- * Note: the TOD should store the current GMT
- */
-
-int m48_tod_get(int *year,		/* 1980-2079 */
-		int *month,		/* 01-12 */
-		int *day,		/* 01-31 */
-		int *hour,		/* 00-23 */
-		int *minute,		/* 00-59 */
-		int *second)		/* 00-59 */
-{
-    int y;
-
-    SYS_TOD_UNPROTECT();
-
-    M48_ADDR[CONTROL] |= 0x40;	/* Set READ bit */
-
-    y = from_bcd(M48_ADDR[YEAR]);
-    *year = y < 80 ? 2000 + y : 1900 + y;
-    *month = from_bcd(M48_ADDR[MONTH]);
-    *day = from_bcd(M48_ADDR[DAY]);
-    /* day_of_week = M48_ADDR[DAY_OF_WEEK] & 0xf; */
-    *hour = from_bcd(M48_ADDR[HOUR]);
-    *minute = from_bcd(M48_ADDR[MINUTE]);
-    *second = from_bcd(M48_ADDR[SECOND] & 0x7f);
-
-    M48_ADDR[CONTROL] &= ~0x40;	/* Clear READ bit */
-
-    SYS_TOD_PROTECT();
-
-    return 0;
-}
-
-int m48_tod_get_second(void)
-{
-    return from_bcd(M48_ADDR[SECOND] & 0x7f);
-}
-
-/*
- * Watchdog function
- *
- *  If usec is 0, the watchdog timer is disarmed.
- *
- *  If usec is non-zero, the watchdog timer is armed (or re-armed) for
- *    approximately usec microseconds (if the exact requested usec is
- *    not supported by the chip, the next higher available value is used).
- *
- *  Minimum watchdog timeout = 62500 usec
- *  Maximum watchdog timeout = 124 sec (124000000 usec)
- */
-
-void m48_watchdog_arm(int usec)
-{
-    int		mpy, res;
-
-    SYS_TOD_UNPROTECT();
-
-    if (usec == 0) {
-	res = 0;
-	mpy = 0;
-    } else if (usec < 2000000) {	/* Resolution: 1/16s if below 2s */
-	res = 0;
-	mpy = (usec + 62499) / 62500;
-    } else if (usec < 8000000) {	/* Resolution: 1/4s if below 8s */
-	res = 1;
-	mpy = (usec + 249999) / 250000;
-    } else if (usec < 32000000) {	/* Resolution: 1s if below 32s */
-	res = 2;
-	mpy = (usec + 999999) / 1000000;
-    } else {				/* Resolution: 4s up to 124s */
-	res = 3;
-	mpy = (usec + 3999999) / 4000000;
-	if (mpy > 31)
-	    mpy = 31;
-    }
-
-    M48_ADDR[WATCH] = (0x80 |		/* Steer to RST signal (IRQ = N/C) */
-		       mpy << 2 |
-		       res);
-
-    SYS_TOD_PROTECT();
-}
-
-/*
- * U-Boot RTC support.
- */
-int
-rtc_get( struct rtc_time *tmp )
-{
-	m48_tod_get(&tmp->tm_year,
-		    &tmp->tm_mon,
-		    &tmp->tm_mday,
-		    &tmp->tm_hour,
-		    &tmp->tm_min,
-		    &tmp->tm_sec);
-	tmp->tm_yday = 0;
-	tmp->tm_isdst= 0;
-
-#ifdef RTC_DEBUG
-	printf( "Get DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec );
-#endif
-
-	return 0;
-}
-
-int rtc_set( struct rtc_time *tmp )
-{
-	m48_tod_set(tmp->tm_year,		/* 1980-2079 */
-		    tmp->tm_mon,		/* 01-12 */
-		    tmp->tm_mday,              /* 01-31 */
-		    tmp->tm_hour,		/* 00-23 */
-		    tmp->tm_min,		/* 00-59 */
-		    tmp->tm_sec);		/* 00-59 */
-
-#ifdef RTC_DEBUG
-	printf( "Set DATE: %4d-%02d-%02d (wday=%d)  TIME: %2d:%02d:%02d\n",
-		tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday,
-		tmp->tm_hour, tmp->tm_min, tmp->tm_sec);
-#endif
-
-	return 0;
-}
-
-void
-rtc_reset (void)
-{
-  m48_tod_init();
-}
diff --git a/board/bmw/m48t59y.h b/board/bmw/m48t59y.h
deleted file mode 100644
index 717300d..0000000
--- a/board/bmw/m48t59y.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * SGS M48-T59Y TOD/NVRAM Driver
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 1999, by Curt McDowell, 08-06-99, Broadcom Corp.
- *
- * (C) Copyright 2001, James Dougherty, 07/18/01, Broadcom Corp.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __M48_T59_Y_H
-#define __M48_T59_Y_H
-
-/*
- * M48 T59Y -Timekeeping Battery backed SRAM.
- */
-
-int m48_tod_init(void);
-
-int m48_tod_set(int year,
-		int month,
-		int day,
-		int hour,
-		int minute,
-		int second);
-
-int m48_tod_get(int *year,
-		int *month,
-		int *day,
-		int *hour,
-		int *minute,
-		int *second);
-
-int m48_tod_get_second(void);
-
-void m48_watchdog_arm(int usec);
-
-#endif /*!__M48_T59_Y_H */
diff --git a/board/bmw/ns16550.c b/board/bmw/ns16550.c
deleted file mode 100644
index be455bb..0000000
--- a/board/bmw/ns16550.c
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * COM1 NS16550 support
- * originally from linux source (arch/powerpc/boot/ns16550.c)
- * modified to use CONFIG_SYS_ISA_MEM and new defines
- */
-
-#include <config.h>
-#include "ns16550.h"
-
-typedef struct NS16550 *NS16550_t;
-
-const NS16550_t COM_PORTS[] =
-	{ (NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4500),
-(NS16550_t) ((CONFIG_SYS_EUMB_ADDR) + 0x4600) };
-
-volatile struct NS16550 *NS16550_init (int chan, int baud_divisor)
-{
-	volatile struct NS16550 *com_port;
-
-	com_port = (struct NS16550 *) COM_PORTS[chan];
-	com_port->ier = 0x00;
-	com_port->lcr = LCR_BKSE;	/* Access baud rate */
-	com_port->dll = baud_divisor & 0xff;	/* 9600 baud */
-	com_port->dlm = (baud_divisor >> 8) & 0xff;
-	com_port->lcr = LCR_8N1;	/* 8 data, 1 stop, no parity */
-	com_port->mcr = MCR_RTS;	/* RTS/DTR */
-	com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR;	/* Clear & enable FIFOs */
-	return (com_port);
-}
-
-void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor)
-{
-	com_port->ier = 0x00;
-	com_port->lcr = LCR_BKSE;	/* Access baud rate */
-	com_port->dll = baud_divisor & 0xff;	/* 9600 baud */
-	com_port->dlm = (baud_divisor >> 8) & 0xff;
-	com_port->lcr = LCR_8N1;	/* 8 data, 1 stop, no parity */
-	com_port->mcr = MCR_RTS;	/* RTS/DTR */
-	com_port->fcr = FCR_FIFO_EN | FCR_RXSR | FCR_TXSR;	/* Clear & enable FIFOs */
-}
-
-void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c)
-{
-	while ((com_port->lsr & LSR_THRE) == 0);
-	com_port->thr = c;
-}
-
-unsigned char NS16550_getc (volatile struct NS16550 *com_port)
-{
-	while ((com_port->lsr & LSR_DR) == 0);
-	return (com_port->rbr);
-}
-
-int NS16550_tstc (volatile struct NS16550 *com_port)
-{
-	return ((com_port->lsr & LSR_DR) != 0);
-}
diff --git a/board/bmw/ns16550.h b/board/bmw/ns16550.h
deleted file mode 100644
index 2087a4a..0000000
--- a/board/bmw/ns16550.h
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- * NS16550 Serial Port
- * originally from linux source (arch/powerpc/boot/ns16550.h)
- * modified slightly to
- * have addresses as offsets from CONFIG_SYS_ISA_BASE
- * added a few more definitions
- * added prototypes for ns16550.c
- * reduced no of com ports to 2
- * modifications (c) Rob Taylor, Flying Pig Systems. 2000.
- * further modified to support the 8245 duart
- * modifications (c) Paul Jimenez, Musenki, Inc. 2001.
- */
-
-
-struct NS16550 {
-	unsigned char rbrthrdlb;	/* 0 */
-	unsigned char ierdmb;		/* 1 */
-	unsigned char iirfcrafr;	/* 2 */
-	unsigned char lcr;		/* 3 */
-	unsigned char mcr;		/* 4 */
-	unsigned char lsr;		/* 5 */
-	unsigned char msr;		/* 6 */
-	unsigned char scr;		/* 7 */
-	unsigned char reserved[2];	/* 8 & 9 */
-	unsigned char dsr;		/* 10 */
-	unsigned char dcr;		/* 11 */
-};
-
-
-#define rbr rbrthrdlb
-#define thr rbrthrdlb
-#define dll rbrthrdlb
-#define ier ierdmb
-#define dlm ierdmb
-#define iir iirfcrafr
-#define fcr iirfcrafr
-#define afr iirfcrafr
-
-#define FCR_FIFO_EN     0x01	/*fifo enable */
-#define FCR_RXSR        0x02	/*receiver soft reset */
-#define FCR_TXSR        0x04	/*transmitter soft reset */
-#define FCR_DMS		0x08	/* DMA Mode Select */
-
-#define MCR_RTS         0x02	/* Readyu to Send */
-#define MCR_LOOP	0x10	/* Local loopback mode enable */
-/* #define MCR_DTR         0x01    noton 8245 duart */
-/* #define MCR_DMA_EN      0x04    noton 8245 duart */
-/* #define MCR_TX_DFR      0x08    noton 8245 duart */
-
-#define LCR_WLS_MSK 0x03	/* character length slect mask */
-#define LCR_WLS_5   0x00	/* 5 bit character length */
-#define LCR_WLS_6   0x01	/* 6 bit character length */
-#define LCR_WLS_7   0x02	/* 7 bit character length */
-#define LCR_WLS_8   0x03	/* 8 bit character length */
-#define LCR_STB     0x04	/* Number of stop Bits, off = 1, on = 1.5 or 2) */
-#define LCR_PEN     0x08	/* Parity eneble */
-#define LCR_EPS     0x10	/* Even Parity Select */
-#define LCR_STKP    0x20	/* Stick Parity */
-#define LCR_SBRK    0x40	/* Set Break */
-#define LCR_BKSE    0x80	/* Bank select enable - aka DLAB on 8245 */
-
-#define LSR_DR      0x01	/* Data ready */
-#define LSR_OE      0x02	/* Overrun */
-#define LSR_PE      0x04	/* Parity error */
-#define LSR_FE      0x08	/* Framing error */
-#define LSR_BI      0x10	/* Break */
-#define LSR_THRE    0x20	/* Xmit holding register empty */
-#define LSR_TEMT    0x40	/* Xmitter empty */
-#define LSR_ERR     0x80	/* Error */
-
-/* useful defaults for LCR*/
-#define LCR_8N1     0x03
-
-
-volatile struct NS16550 *NS16550_init (int chan, int baud_divisor);
-void NS16550_putc (volatile struct NS16550 *com_port, unsigned char c);
-unsigned char NS16550_getc (volatile struct NS16550 *com_port);
-int NS16550_tstc (volatile struct NS16550 *com_port);
-void NS16550_reinit (volatile struct NS16550 *com_port, int baud_divisor);
diff --git a/board/bmw/serial.c b/board/bmw/serial.c
deleted file mode 100644
index 08f449c..0000000
--- a/board/bmw/serial.c
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * (C) Copyright 2000
- * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <serial.h>
-#include <linux/compiler.h>
-
-#include "ns16550.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if CONFIG_CONS_INDEX == 1
-static struct NS16550 *console =
-		(struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500);
-#elif CONFIG_CONS_INDEX == 2
-static struct NS16550 *console =
-		(struct NS16550 *) (CONFIG_SYS_EUMB_ADDR + 0x4500);
-#else
-#error no valid console defined
-#endif
-
-extern ulong get_bus_freq (ulong);
-
-static int bmw_serial_init(void)
-{
-	int clock_divisor = gd->bus_clk / 16 / gd->baudrate;
-
-	NS16550_init (CONFIG_CONS_INDEX - 1, clock_divisor);
-
-	return (0);
-}
-
-static void bmw_serial_putc(const char c)
-{
-	if (c == '\n') {
-		serial_putc ('\r');
-	}
-	NS16550_putc (console, c);
-}
-
-static void bmw_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-
-static int bmw_serial_getc(void)
-{
-	return NS16550_getc (console);
-}
-
-static int bmw_serial_tstc(void)
-{
-	return NS16550_tstc (console);
-}
-
-static void bmw_serial_setbrg(void)
-{
-	int clock_divisor = get_bus_freq (0) / 16 / gd->baudrate;
-
-	NS16550_reinit (console, clock_divisor);
-}
-
-static struct serial_device bmw_serial_drv = {
-	.name	= "bmw_serial",
-	.start	= bmw_serial_init,
-	.stop	= NULL,
-	.setbrg	= bmw_serial_setbrg,
-	.putc	= bmw_serial_putc,
-	.puts	= bmw_serial_puts,
-	.getc	= bmw_serial_getc,
-	.tstc	= bmw_serial_tstc,
-};
-
-void bmw_serial_initialize(void)
-{
-	serial_register(&bmw_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &bmw_serial_drv;
-}
diff --git a/board/c2mon/Makefile b/board/c2mon/Makefile
deleted file mode 100644
index b49f26d..0000000
--- a/board/c2mon/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o flash.o pcmcia.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/c2mon/c2mon.c b/board/c2mon/c2mon.c
deleted file mode 100644
index 348dfa0..0000000
--- a/board/c2mon/c2mon.c
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] =
-{
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x11ADFC04, 0xEFBBBC00,
-	0x1FF77C47, /* last */
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-		    0x1FF77C34, 0xEFEABC34, 0x1FB57C35, /* last */
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEFC04, 0x10ADFC04, 0xF0AFFC00,
-	0xF0AFFC00, 0xF1AFFC00, 0xEFBBBC00, 0x1FF77C47, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEBC00, 0x01B93C04, 0x1FF77C47, /* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 */
-	0x1F07FC04, 0xEEAEBC00, 0x10AD7C00, 0xF0AFFC00,
-	0xF0AFFC00, 0xE1BBBC04, 0x1FF77C47, /* last */
-					    _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 */
-	0x1FF5FC84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
-	0xFFFFFC84, 0xFFFFFC07, /* last */
-				_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0x7FFFFC07, /* last */
-		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	char buf[64];
-	int i;
-	int l = getenv_f("serial#", buf, sizeof(buf));
-
-	puts ("Board: TTTech C2MON ");
-
-	for (i = 0; i < l;  ++i) {
-		if (buf[i] == ' ')
-			break;
-		putc (buf[i]);
-	}
-
-	putc ('\n');
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long reg;
-	long int size8, size9;
-	long int size = 0;
-
-	upmconfig (UPMA, (uint *)sdram_table, sizeof(sdram_table) / sizeof(uint));
-
-	/*
-	 * Preliminary prescaler for refresh (depends on number of
-	 * banks): This value is selected for four cycles every 62.4 us
-	 * with two SDRAM banks or four cycles every 31.2 us with one
-	 * bank. It will be adjusted after memory sizing.
-	 */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_8K;
-
-	memctl->memc_mar = 0x00000088;
-
-	/*
-	 * Map controller bank 2 the SDRAM bank 2 at physical address 0.
-	 */
-	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
-	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 0 */
-	udelay (1);
-	memctl->memc_mcr = 0x80004230;	/* SDRAM bank 0 - execute twice */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay (1000);
-
-	/*
-	 * Check Bank 0 Memory Size
-	 *
-	 * try 8 column mode
-	 */
-	size8 = dram_size (CONFIG_SYS_MAMR_8COL,
-			   SDRAM_BASE2_PRELIM,
-			   SDRAM_MAX_SIZE);
-
-	udelay (1000);
-
-	/*
-	 * try 9 column mode
-	 */
-	size9 = dram_size (CONFIG_SYS_MAMR_9COL,
-			   SDRAM_BASE2_PRELIM,
-			   SDRAM_MAX_SIZE);
-
-	if (size8 < size9) {		/* leave configuration at 9 columns */
-		size = size9;
-/*		debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
-	} else {			/* back to 8 columns            */
-		size = size8;
-		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
-		udelay (500);
-/*		debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
-	}
-
-	udelay (1000);
-
-	/*
-	 * Adjust refresh rate depending on SDRAM type
-	 * For types > 128 MBit leave it at the current (fast) rate
-	 */
-	if (size < 0x02000000) {
-		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
-		udelay (1000);
-	}
-
-	/*
-	 * Final mapping
-	 */
-	memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-	memctl->memc_br2 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
-	/*
-	 * No bank 1
-	 *
-	 * invalidate bank
-	 */
-	memctl->memc_br3 = 0;
-
-	/* adjust refresh rate depending on SDRAM type, one bank */
-	reg = memctl->memc_mptpr;
-	reg >>= 1;			/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
-	memctl->memc_mptpr = reg;
-
-	udelay (10000);
-
-	return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-						   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size(base, maxsize));
-}
diff --git a/board/c2mon/flash.c b/board/c2mon/flash.c
deleted file mode 100644
index d33cb6c..0000000
--- a/board/c2mon/flash.c
+++ /dev/null
@@ -1,570 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#ifndef	CONFIG_ENV_ADDR
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-#endif
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size_b0, size_b1;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-	size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
-	if (size_b1 > size_b0) {
-		printf ("## ERROR: "
-			"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
-			size_b1, size_b1<<20,
-			size_b0, size_b0<<20
-		);
-		flash_info[0].flash_id	= FLASH_UNKNOWN;
-		flash_info[1].flash_id	= FLASH_UNKNOWN;
-		flash_info[0].sector_count	= -1;
-		flash_info[1].sector_count	= -1;
-		flash_info[0].size		= 0;
-		flash_info[1].size		= 0;
-		return (0);
-	}
-
-	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
-	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
-		      &flash_info[0]);
-#endif
-
-	if (size_b1) {
-		memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
-		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
-				    BR_MS_GPCM | BR_V;
-
-		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
-					  &flash_info[1]);
-
-		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-		/* monitor protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_SYS_MONITOR_BASE,
-			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-			      &flash_info[1]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-		/* ENV protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_ENV_ADDR,
-			      CONFIG_ENV_ADDR+CONFIG_ENV_SIZE-1,
-			      &flash_info[1]);
-#endif
-	} else {
-		memctl->memc_br1 = 0;		/* invalidate bank */
-
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-	}
-
-	flash_info[0].size = size_b0;
-	flash_info[1].size = size_b1;
-
-	return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00900090;
-
-	value = addr[0];
-
-	switch (value) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[1];			/* device ID		*/
-
-	switch (value) {
-	case AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-
-	case AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-#if 0	/* enable when device IDs are available */
-	case AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-
-	case AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-#endif
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-	}
-
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr = (volatile unsigned long *)(info->start[i]);
-		info->protect[i] = addr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile unsigned long *)info->start[0];
-
-		*addr = 0x00F000F0;	/* reset bank */
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00800080;
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long*)(info->start[sect]);
-			addr[0] = 0x00300030;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long*)(info->start[l_sect]);
-	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (volatile unsigned long *)info->start[0];
-	addr[0] = 0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00A000A0;
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/c2mon/pcmcia.c b/board/c2mon/pcmcia.c
deleted file mode 100644
index 2267829..0000000
--- a/board/c2mon/pcmcia.c
+++ /dev/null
@@ -1,282 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <pcmcia.h>
-
-#undef	CONFIG_PCMCIA
-
-#if	defined(CONFIG_CMD_PCMCIA)
-#define	CONFIG_PCMCIA
-#endif
-
-#if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_8xx_PCCARD)
-#define	CONFIG_PCMCIA
-#endif
-
-#ifdef	CONFIG_PCMCIA
-
-#define PCMCIA_BOARD_MSG "C2MON"
-
-static void cfg_ports (void)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	ushort sreg;
-
-	immap = (immap_t *)CONFIG_SYS_IMMR;
-	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
-
-	/*
-	* Configure Port C for TPS2211 PC-Card Power-Interface Switch
-	*
-	* Switch off all voltages, assert shutdown
-	*/
-	sreg = immap->im_ioport.iop_pcdat;
-	sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1);	/* VAVPP => Hi-Z */
-	sreg &= ~(TPS2211_VCCD0 | TPS2211_VCCD1);	/* 3V and 5V off */
-	immap->im_ioport.iop_pcdat = sreg;
-
-	immap->im_ioport.iop_pcpar &= ~(TPS2211_OUTPUTS);
-	immap->im_ioport.iop_pcdir |=   TPS2211_OUTPUTS;
-
-	debug ("Set Port C: PAR:     %04x DIR:     %04x DAT:     %04x\n",
-	       immap->im_ioport.iop_pcpar,
-	       immap->im_ioport.iop_pcdir,
-	       immap->im_ioport.iop_pcdat);
-
-	/*
-	* Configure Port B for TPS2211 PC-Card Power-Interface Switch
-	*
-	* Over-Current Input only
-	*/
-	cp->cp_pbpar &= ~(TPS2211_INPUTS);
-	cp->cp_pbdir &= ~(TPS2211_INPUTS);
-
-	debug ("Set Port B: PAR: %08x DIR: %08x DAT: %08x\n",
-	       cp->cp_pbpar, cp->cp_pbdir, cp->cp_pbdat);
-}
-
-int pcmcia_hardware_enable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	volatile sysconf8xx_t	*sysp;
-	uint reg, pipr, mask;
-	ushort sreg;
-	int i;
-
-	debug ("hardware_enable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	udelay(10000);
-
-	immap = (immap_t *)CONFIG_SYS_IMMR;
-	sysp  = (sysconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_siu_conf));
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-	cp    = (cpm8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_cpm));
-
-	/* Configure Ports for TPS2211A PC-Card Power-Interface Switch */
-	cfg_ports ();
-
-	/*
-	* Configure SIUMCR to enable PCMCIA port B
-	* (VFLS[0:1] are not used for debugging, we connect FRZ# instead)
-	*/
-	sysp->sc_siumcr &= ~SIUMCR_DBGC11;	/* set DBGC to 00 */
-
-	/* clear interrupt state, and disable interrupts */
-	pcmp->pcmc_pscr =  PCMCIA_MASK(_slot_);
-	pcmp->pcmc_per &= ~PCMCIA_MASK(_slot_);
-
-	/*
-	* Disable interrupts, DMA, and PCMCIA buffers
-	* (isolate the interface) and assert RESET signal
-	*/
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	* Make sure there is a card in the slot, then configure the interface.
-	*/
-	udelay(10000);
-	debug ("[%d] %s: PIPR(%p)=0x%x\n",
-	       __LINE__,__FUNCTION__,
-	       &(pcmp->pcmc_pipr),pcmp->pcmc_pipr);
-	if (pcmp->pcmc_pipr & (0x18000000 >> (slot << 4))) {
-		printf ("   No Card found\n");
-		return (1);
-	}
-
-	/*
-	* Power On: Set VAVCC to 3.3V or 5V, set VAVPP to Hi-Z
-	*/
-	mask = PCMCIA_VS1(slot) | PCMCIA_VS2(slot);
-	pipr = pcmp->pcmc_pipr;
-	debug ("PIPR: 0x%x ==> VS1=o%s, VS2=o%s\n",
-	       pipr,
-	       (reg&PCMCIA_VS1(slot))?"n":"ff",
-	       (reg&PCMCIA_VS2(slot))?"n":"ff");
-
-	sreg = immap->im_ioport.iop_pcdat;
-	if ((pipr & mask) == mask) {
-		sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1 |	/* VAVPP => Hi-Z */
-				TPS2211_VCCD1);			/* 5V on	*/
-		sreg &= ~(TPS2211_VCCD0);			/* 3V off	*/
-		puts (" 5.0V card found: ");
-	} else {
-		sreg |=  (TPS2211_VPPD0 | TPS2211_VPPD1 |	/* VAVPP => Hi-Z */
-				TPS2211_VCCD0);			/* 3V on	*/
-		sreg &= ~(TPS2211_VCCD1);			/* 5V off	*/
-		puts (" 3.3V card found: ");
-	}
-
-	debug ("\nPC DAT: %04x -> 3.3V %s 5.0V %s\n",
-	       sreg,
-	       ( (sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) ? "on" : "off",
-	       (!(sreg & TPS2211_VCCD0) &&  (sreg & TPS2211_VCCD1)) ? "on" : "off"
-	      );
-
-	immap->im_ioport.iop_pcdat = sreg;
-
-	/*  Wait 500 ms; use this to check for over-current */
-	for (i=0; i<5000; ++i) {
-		if ((cp->cp_pbdat & TPS2211_OC) == 0) {
-			printf ("   *** Overcurrent - Safety shutdown ***\n");
-			immap->im_ioport.iop_pcdat &= ~(TPS2211_VCCD0|TPS2211_VCCD1);
-			return (1);
-		}
-		udelay (100);
-	}
-
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	udelay(250000);	/* some cards need >150 ms to come up :-( */
-
-	debug ("# hardware_enable done\n");
-
-	return (0);
-}
-
-
-#if defined(CONFIG_CMD_PCMCIA)
-int pcmcia_hardware_disable(int slot)
-{
-	volatile immap_t	*immap;
-	volatile cpm8xx_t	*cp;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-
-	debug ("hardware_disable: " PCMCIA_BOARD_MSG " Slot %c\n", 'A'+slot);
-
-	immap = (immap_t *)CONFIG_SYS_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-
-	/* Configure PCMCIA General Control Register */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = 0;
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-
-	/* ALl voltages off / Hi-Z */
-	immap->im_ioport.iop_pcdat |= (TPS2211_VPPD0 | TPS2211_VPPD1 |
-			TPS2211_VCCD0 | TPS2211_VCCD1 );
-
-	udelay(10000);
-
-	return (0);
-}
-#endif
-
-
-int pcmcia_voltage_set(int slot, int vcc, int vpp)
-{
-	volatile immap_t	*immap;
-	volatile pcmconf8xx_t	*pcmp;
-	u_long reg;
-	ushort sreg;
-
-	debug ("voltage_set: "
-			PCMCIA_BOARD_MSG
-			" Slot %c, Vcc=%d.%d, Vpp=%d.%d\n",
-	'A'+slot, vcc/10, vcc%10, vpp/10, vcc%10);
-
-	immap = (immap_t *)CONFIG_SYS_IMMR;
-	pcmp  = (pcmconf8xx_t *)(&(((immap_t *)CONFIG_SYS_IMMR)->im_pcmcia));
-	/*
-	 * Disable PCMCIA buffers (isolate the interface)
-	 * and assert RESET signal
-	 */
-	debug ("Disable PCMCIA buffers and assert RESET\n");
-	reg  = PCMCIA_PGCRX(_slot_);
-	reg |= __MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg |= __MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	/*
-	* Configure Port C pins for
-	* 5 Volts Enable and 3 Volts enable,
-	* Turn all power pins to Hi-Z
-	*/
-	debug ("PCMCIA power OFF\n");
-	cfg_ports ();	/* Enables switch, but all in Hi-Z */
-
-	sreg  = immap->im_ioport.iop_pcdat;
-	sreg |= TPS2211_VPPD0 | TPS2211_VPPD1;		/* VAVPP always Hi-Z */
-
-	switch(vcc) {
-		case  0:			break;	/* Switch off		*/
-		case 33: sreg |=  TPS2211_VCCD0;	/* Switch on 3.3V	*/
-		sreg &= ~TPS2211_VCCD1;
-		break;
-		case 50: sreg &= ~TPS2211_VCCD0;	/* Switch on 5.0V	*/
-		sreg |=  TPS2211_VCCD1;
-		break;
-		default:			goto done;
-	}
-
-	/* Checking supported voltages */
-
-	debug ("PIPR: 0x%x --> %s\n",
-	       pcmp->pcmc_pipr,
-	       (pcmp->pcmc_pipr & 0x00008000) ? "only 5 V" : "can do 3.3V");
-
-	immap->im_ioport.iop_pcdat = sreg;
-
-#ifdef DEBUG
-{
-	char *s;
-
-	if ((sreg & TPS2211_VCCD0) && !(sreg & TPS2211_VCCD1)) {
-		s = "at 3.3V";
-	} else if (!(sreg & TPS2211_VCCD0) &&  (sreg & TPS2211_VCCD1)) {
-		s = "at 5.0V";
-	} else {
-		s = "down";
-	}
-	printf ("PCMCIA powered %s\n", s);
-}
-#endif
-
-done:
-	debug ("Enable PCMCIA buffers and stop RESET\n");
-	reg  =  PCMCIA_PGCRX(_slot_);
-	reg &= ~__MY_PCMCIA_GCRX_CXRESET;	/* active high */
-	reg &= ~__MY_PCMCIA_GCRX_CXOE;		/* active low  */
-	PCMCIA_PGCRX(_slot_) = reg;
-	udelay(500);
-
-	debug ("voltage_set: " PCMCIA_BOARD_MSG " Slot %c, DONE\n",
-	       slot+'A');
-	return (0);
-}
-
-#endif	/* CONFIG_PCMCIA */
diff --git a/board/c2mon/u-boot.lds b/board/c2mon/u-boot.lds
deleted file mode 100644
index b9b8e3c..0000000
--- a/board/c2mon/u-boot.lds
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2001-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/libmpc8xx.o	(.text*)
-    net/libnet.o			(.text*)
-
-    . = env_offset;
-    common/env_embedded.o		(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end__ = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/c2mon/u-boot.lds.debug b/board/c2mon/u-boot.lds.debug
deleted file mode 100644
index c771102..0000000
--- a/board/c2mon/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end__ = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/cobra5272/u-boot.lds b/board/cobra5272/u-boot.lds
index c4039ed..d054f20 100644
--- a/board/cobra5272/u-boot.lds
+++ b/board/cobra5272/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/cogent/serial.c b/board/cogent/serial.c
index cd4a976..20631d1 100644
--- a/board/cogent/serial.c
+++ b/board/cogent/serial.c
@@ -68,12 +68,6 @@
 	cma_mb_reg_write (&mbsp->ser_thr, c);
 }
 
-static void cogent_serial_puts(const char *s)
-{
-	while (*s != '\0')
-		serial_putc (*s++);
-}
-
 static int cogent_serial_getc(void)
 {
 	cma_mb_serial *mbsp = (cma_mb_serial *) CMA_MB_SERIAL_BASE;
@@ -96,7 +90,7 @@
 	.stop	= NULL,
 	.setbrg	= cogent_serial_setbrg,
 	.putc	= cogent_serial_putc,
-	.puts	= cogent_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= cogent_serial_getc,
 	.tstc	= cogent_serial_tstc,
 };
diff --git a/board/cogent/u-boot.lds b/board/cogent/u-boot.lds
index 2393d8d..2a6027f 100644
--- a/board/cogent/u-boot.lds
+++ b/board/cogent/u-boot.lds
@@ -70,9 +70,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/cogent/u-boot.lds.debug b/board/cogent/u-boot.lds.debug
index 99c48f2..dc8c4e9 100644
--- a/board/cogent/u-boot.lds.debug
+++ b/board/cogent/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/compal/paz00/Makefile b/board/compal/paz00/Makefile
index 7f7287e..fa5c510 100644
--- a/board/compal/paz00/Makefile
+++ b/board/compal/paz00/Makefile
@@ -20,9 +20,11 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= $(BOARD).o
-COBJS	+= ../../nvidia/common/board.o
+COBJS-y	:= $(BOARD).o
 
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/board/compulab/trimslice/Makefile b/board/compulab/trimslice/Makefile
index ff07879..cc844d2 100644
--- a/board/compulab/trimslice/Makefile
+++ b/board/compulab/trimslice/Makefile
@@ -28,9 +28,11 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	:= $(BOARD).o
-COBJS	+= ../../nvidia/common/board.o
+COBJS-y	:= $(BOARD).o
 
+include ../../nvidia/common/common.mk
+
+COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 
diff --git a/board/cpc45/Makefile b/board/cpc45/Makefile
index 5c6b78f..ac1d174 100644
--- a/board/cpc45/Makefile
+++ b/board/cpc45/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	= $(BOARD).o flash.o plx9030.o pd67290.o
+COBJS	= $(BOARD).o flash.o plx9030.o pd67290.o ide.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/cpc45/cpc45.c b/board/cpc45/cpc45.c
index 1178822..2200806 100644
--- a/board/cpc45/cpc45.c
+++ b/board/cpc45/cpc45.c
@@ -260,21 +260,6 @@
 
 #endif
 
-# ifdef CONFIG_IDE_LED
-void ide_led (uchar led, uchar status)
-{
-	u_char  val;
-	/* We have one PCMCIA slot and use LED H4 for the IDE Interface */
-	val = readb(BCSR_BASE + 0x04);
-	if (status) {				/* led on */
-		val |= B_CTRL_LED0;
-	} else {
-		val &= ~B_CTRL_LED0;
-	}
-	writeb(val, BCSR_BASE + 0x04);
-}
-# endif
-
 int board_eth_init(bd_t *bis)
 {
 	return pci_eth_init(bis);
diff --git a/board/cpc45/ide.c b/board/cpc45/ide.c
new file mode 100644
index 0000000..03be59f
--- /dev/null
+++ b/board/cpc45/ide.c
@@ -0,0 +1,145 @@
+/*
+ * (C) Copyright 2001
+ * Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
+ *
+ * (C) Copyright 2000-2011
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <ide.h>
+#include <ata.h>
+#include <asm/io.h>
+
+#define EIEIO		__asm__ volatile ("eieio")
+#define SYNC		__asm__ volatile ("sync")
+
+void ide_input_swap_data(int dev, ulong *sect_buf, int words)
+{
+	uchar i;
+	volatile uchar *pbuf_even =
+		(uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
+	volatile uchar *pbuf_odd =
+		(uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
+	ushort *dbuf = (ushort *) sect_buf;
+
+	while (words--) {
+		for (i = 0; i < 2; i++) {
+			*(((uchar *) (dbuf)) + 1) = *pbuf_even;
+			*(uchar *) dbuf = *pbuf_odd;
+			dbuf += 1;
+		}
+	}
+}
+
+void ide_input_data(int dev, ulong *sect_buf, int words)
+{
+	uchar *dbuf;
+	volatile uchar *pbuf_even;
+	volatile uchar *pbuf_odd;
+
+	pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
+	pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
+	dbuf = (uchar *) sect_buf;
+	while (words--) {
+		*dbuf++ = *pbuf_even;
+		EIEIO;
+		SYNC;
+		*dbuf++ = *pbuf_odd;
+		EIEIO;
+		SYNC;
+		*dbuf++ = *pbuf_even;
+		EIEIO;
+		SYNC;
+		*dbuf++ = *pbuf_odd;
+		EIEIO;
+		SYNC;
+	}
+}
+
+void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
+{
+	uchar *dbuf;
+	volatile uchar *pbuf_even;
+	volatile uchar *pbuf_odd;
+
+	pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
+	pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
+	dbuf = (uchar *) sect_buf;
+	while (shorts--) {
+		EIEIO;
+		*dbuf++ = *pbuf_even;
+		EIEIO;
+		*dbuf++ = *pbuf_odd;
+	}
+}
+
+void ide_output_data(int dev, const ulong *sect_buf, int words)
+{
+	uchar *dbuf;
+	volatile uchar *pbuf_even;
+	volatile uchar *pbuf_odd;
+
+	pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
+	pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
+	dbuf = (uchar *) sect_buf;
+	while (words--) {
+		EIEIO;
+		*pbuf_even = *dbuf++;
+		EIEIO;
+		*pbuf_odd = *dbuf++;
+		EIEIO;
+		*pbuf_even = *dbuf++;
+		EIEIO;
+		*pbuf_odd = *dbuf++;
+	}
+}
+
+void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
+{
+	uchar *dbuf;
+	volatile uchar *pbuf_even;
+	volatile uchar *pbuf_odd;
+
+	pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
+	pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
+	dbuf = (uchar *) sect_buf;
+	while (shorts--) {
+		EIEIO;
+		*pbuf_even = *dbuf++;
+		EIEIO;
+		*pbuf_odd = *dbuf++;
+	}
+}
+
+void ide_led(uchar led, uchar status)
+{
+	u_char	val;
+	/* We have one PCMCIA slot and use LED H4 for the IDE Interface */
+	val = readb(BCSR_BASE + 0x04);
+	if (status)				/* led on */
+		val |= B_CTRL_LED0;
+	else
+		val &= ~B_CTRL_LED0;
+
+	writeb(val, BCSR_BASE + 0x04);
+}
+
diff --git a/board/cray/L1/u-boot.lds.debug b/board/cray/L1/u-boot.lds.debug
index fcf8ebb..d7a2e56 100644
--- a/board/cray/L1/u-boot.lds.debug
+++ b/board/cray/L1/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/dave/PPChameleonEVB/u-boot.lds b/board/dave/PPChameleonEVB/u-boot.lds
index 3b10114..8a306d6 100644
--- a/board/dave/PPChameleonEVB/u-boot.lds
+++ b/board/dave/PPChameleonEVB/u-boot.lds
@@ -74,9 +74,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
index 6f6e065..c5fd93c 100644
--- a/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
+++ b/board/davinci/da8xxevm/u-boot-spl-da850evm.lds
@@ -47,6 +47,12 @@
 
 	. = ALIGN(4);
 	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		#include <u-boot.lst>
+	} >.sram
+
 	. = ALIGN(4);
 	.rel.dyn : {
 		__rel_dyn_start = .;
diff --git a/board/davinci/da8xxevm/u-boot-spl-hawk.lds b/board/davinci/da8xxevm/u-boot-spl-hawk.lds
index b3a41af..86dc172 100644
--- a/board/davinci/da8xxevm/u-boot-spl-hawk.lds
+++ b/board/davinci/da8xxevm/u-boot-spl-hawk.lds
@@ -58,6 +58,11 @@
 	}
 
 	. = ALIGN(4);
+	.u_boot_list : {
+		#include <u-boot.lst>
+	}
+
+	. = ALIGN(4);
 	__rel_dyn_start = .;
 	__rel_dyn_end = .;
 	__dynsym_start = .;
diff --git a/board/dbau1x00/u-boot.lds b/board/dbau1x00/u-boot.lds
index 4a59cea..8a871cf 100644
--- a/board/dbau1x00/u-boot.lds
+++ b/board/dbau1x00/u-boot.lds
@@ -54,10 +54,9 @@
 
 	.sdata  : { *(.sdata*) }
 
-	.u_boot_cmd : {
-	  __u_boot_cmd_start = .;
-	  *(.u_boot_cmd)
-	  __u_boot_cmd_end = .;
+	. = ALIGN(4);
+	.u_boot_list : {
+		#include <u-boot.lst>
 	}
 
 	uboot_end_data = .;
diff --git a/board/dvlhost/u-boot.lds b/board/dvlhost/u-boot.lds
index 01ec390..1bd1700 100644
--- a/board/dvlhost/u-boot.lds
+++ b/board/dvlhost/u-boot.lds
@@ -54,11 +54,11 @@
 		*(.got)
 	}
 	. =.;
-	__u_boot_cmd_start =.;
-	.u_boot_cmd : {
-		*(.u_boot_cmd)
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
 	}
-	__u_boot_cmd_end =.;
 
 	. = ALIGN (4);
 	.rel.dyn : {
diff --git a/board/eltec/mhpc/u-boot.lds b/board/eltec/mhpc/u-boot.lds
index fd4e8a5..c8d3894 100644
--- a/board/eltec/mhpc/u-boot.lds
+++ b/board/eltec/mhpc/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/eltec/mhpc/u-boot.lds.debug b/board/eltec/mhpc/u-boot.lds.debug
index c771102..92796e6 100644
--- a/board/eltec/mhpc/u-boot.lds.debug
+++ b/board/eltec/mhpc/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/emk/top860/u-boot.lds b/board/emk/top860/u-boot.lds
index fb06648..22626d3 100644
--- a/board/emk/top860/u-boot.lds
+++ b/board/emk/top860/u-boot.lds
@@ -67,9 +67,11 @@
 
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/ep88x/u-boot.lds b/board/ep88x/u-boot.lds
index 332b35a..1dcc22a 100644
--- a/board/ep88x/u-boot.lds
+++ b/board/ep88x/u-boot.lds
@@ -62,9 +62,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/esd/cpci750/ide.c b/board/esd/cpci750/ide.c
index aa001df..4ef10e7 100644
--- a/board/esd/cpci750/ide.c
+++ b/board/esd/cpci750/ide.c
@@ -30,7 +30,6 @@
 #include <ide.h>
 #include <pci.h>
 
-extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 int cpci_hd_type;
 
 int ata_device(int dev)
diff --git a/board/esd/cpci750/serial.c b/board/esd/cpci750/serial.c
index 25f8950..160e0e0 100644
--- a/board/esd/cpci750/serial.c
+++ b/board/esd/cpci750/serial.c
@@ -75,21 +75,13 @@
 	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
 }
 
-
-static void cpci750_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device cpci750_serial_drv = {
 	.name	= "cpci750_serial",
 	.start	= cpci750_serial_init,
 	.stop	= NULL,
 	.setbrg	= cpci750_serial_setbrg,
 	.putc	= cpci750_serial_putc,
-	.puts	= cpci750_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= cpci750_serial_getc,
 	.tstc	= cpci750_serial_tstc,
 };
diff --git a/board/esd/dasa_sim/u-boot.lds b/board/esd/dasa_sim/u-boot.lds
index b15948d..7eca183 100644
--- a/board/esd/dasa_sim/u-boot.lds
+++ b/board/esd/dasa_sim/u-boot.lds
@@ -73,9 +73,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/esd/pmc440/u-boot-nand.lds b/board/esd/pmc440/u-boot-nand.lds
index 71f0fd2..ca7df45 100644
--- a/board/esd/pmc440/u-boot-nand.lds
+++ b/board/esd/pmc440/u-boot-nand.lds
@@ -102,10 +102,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  .u_boot_list : {
+		#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/esd/tasreg/u-boot.lds b/board/esd/tasreg/u-boot.lds
index f697ccd..0d6a0f3 100644
--- a/board/esd/tasreg/u-boot.lds
+++ b/board/esd/tasreg/u-boot.lds
@@ -65,9 +65,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/esteem192e/u-boot.lds b/board/esteem192e/u-boot.lds
index 163b83d..fe5cf09 100644
--- a/board/esteem192e/u-boot.lds
+++ b/board/esteem192e/u-boot.lds
@@ -36,7 +36,6 @@
     arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
     net/libnet.o			(.text*)
     board/esteem192e/libesteem192e.o	(.text*)
-    *(.text.*printf)
 
     . = env_offset;
     common/env_embedded.o		(.text*)
@@ -75,9 +74,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/etx094/etx094.c b/board/etx094/etx094.c
deleted file mode 100644
index abefe4a..0000000
--- a/board/etx094/etx094.c
+++ /dev/null
@@ -1,384 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-static void read_hw_vers (void);
-
-/* ------------------------------------------------------------------------- */
-
-#define _NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-
-	/* single read   (offset 0x00 in upm ram) */
-
-	0xEECEFC24, 0x100DFC24, 0xE02FBC04, 0x01AA7C04,
-	0x1FB5FC00, 0xFFFFFC05, _NOT_USED_, _NOT_USED_,
-
-	/* burst read    (offset 0x08 in upm ram) */
-
-	0xEECEFC24, 0x100DFC24, 0xE0FFBC04, 0x10FF7C04,
-	0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC00, 0xFFFFFC00,
-	0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* single write  (offset 0x18 in upm ram) */
-
-	0xEECEFC24, 0x100DFC24, 0xE02BBC04, 0x01A27C00,
-	0xEFAAFC04, 0x1FB5FC05, _NOT_USED_, _NOT_USED_,
-
-	/* burst write   (offset 0x20 in upm ram) */
-
-	0xEECEFC24, 0x103DFC24, 0xE0FBBC00, 0x10F77C00,
-	0xF0FFFC00, 0xF0FFFC00, 0xF0FFFC04, 0xFFFFFC05,
-
-	/* init part1      (offset 0x28 in upm ram) */
-
-	0xEFFAFC3C, 0x1FF4FC34, 0xEFFCBC34, 0x1FFC3C34,
-	0xFFFC3C35, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-	/* refresh   (offset 0x30 in upm ram) */
-
-	0xEFFEBC0C, 0x1FFD7C04, 0xFFFFFC04, 0xFFFFFC05,
-
-	/* init part2     (offset 0x34 in upm ram) */
-
-	0xFFFEBC04, 0xEFFC3CB4, 0x1FFC3C34, 0xFFFC3C34,
-	0xFFFC3C34, 0xEFE83CB4, 0x1FB57C35, _NOT_USED_,
-
-	/* exception     (offset 0x3C in upm ram) */
-
-	0xFFFFFC05, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Test ETX ID string (ETX_xxx...)
- *
- * Return 1 always.
- */
-
-int checkboard (void)
-{
-	char buf[64];
-	int i;
-	int l = getenv_f("serial#", buf, sizeof(buf));
-
-	puts ("Board: ");
-
-#ifdef SB_ETX094
-	gd->board_type = 0; /* 0 = 2SDRAM-Device */
-#else
-	gd->board_type = 1; /* 1 = 1SDRAM-Device */
-#endif
-
-	if (l < 0 || strncmp(buf, "ETX_", 4)) {
-		puts ("### No HW ID - assuming ETX_094\n");
-		read_hw_vers ();
-		return (0);
-	}
-
-	for (i = 0; i < l; ++i) {
-		if (buf[i] == ' ')
-			break;
-		putc(buf[i]);
-	}
-	putc ('\n');
-
-	read_hw_vers ();
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size_b0, size_b1, size8, size9;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-			   sizeof (sdram_table) / sizeof (uint));
-
-	/*
-	 * Preliminary prescaler for refresh (depends on number of
-	 * banks): This value is selected for four cycles every 62.4 us
-	 * with two SDRAM banks or four cycles every 31.2 us with one
-	 * bank. It will be adjusted after memory sizing.
-	 */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K;	/* MPTPR_PTP_DIV32 0x0200 */
-
-	/* A3(SDRAM)=0      => Bursttype = Sequential
-	 * A2-A0(SDRAM)=010 => Burst length = 4
-	 * A4-A6(SDRAM)=010 => CasLat=2
-	 */
-	memctl->memc_mar = 0x00000088;
-
-	/*
-	 * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
-	 * preliminary addresses - these have to be modified after the
-	 * SDRAM size has been determined.
-	 */
-	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
-	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
-	if (board_type == 0) {	/* "L" type boards have only one bank SDRAM */
-		memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
-		memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-	}
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80004128;	/* SDRAM bank 0 (CS2) - Init Part 1 */
-	memctl->memc_mcr = 0x80004734;	/* SDRAM bank 0 (CS2) - Init Part 2 */
-	udelay (1);
-
-	if (board_type == 0) {		/* "L" type boards have only one bank SDRAM */
-		memctl->memc_mcr = 0x80006128;	/* SDRAM bank 1 (CS3) - Init Part 1 */
-		memctl->memc_mcr = 0x80006734;	/* SDRAM bank 1 (CS3) - Init Part 2 */
-		udelay (1);
-	}
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay (1000);
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 *
-	 * try 8 column mode
-	 */
-	size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE2_PRELIM,
-					   SDRAM_MAX_SIZE);
-
-	udelay (1000);
-
-	/*
-	 * try 9 column mode
-	 */
-	size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE2_PRELIM,
-					   SDRAM_MAX_SIZE);
-
-	if (size8 < size9) {		/* leave configuration at 9 columns */
-		size_b0 = size9;
-/*	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20);	*/
-	} else {					/* back to 8 columns            */
-		size_b0 = size8;
-		memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
-		udelay (500);
-/*	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20);	*/
-	}
-
-	if (board_type == 0) {		/* "L" type boards have only one bank SDRAM */
-		/*
-		 * Check Bank 1 Memory Size
-		 * use current column settings
-		 * [9 column SDRAM may also be used in 8 column mode,
-		 *  but then only half the real size will be used.]
-		 */
-		size_b1 =
-				dram_size (memctl->memc_mamr, (long *) SDRAM_BASE3_PRELIM,
-						   SDRAM_MAX_SIZE);
-/*	debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20);	*/
-	} else {
-		size_b1 = 0;
-	}
-
-	udelay (1000);
-
-	/*
-	 * Adjust refresh rate depending on SDRAM type, both banks
-	 * For types > 128 MBit leave it at the current (fast) rate
-	 */
-	if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
-		/* reduce to 15.6 us (62.4 us / quad) */
-		memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;	/*DIV16 */
-		udelay (1000);
-	}
-
-	/*
-	 * Final mapping: map bigger bank first
-	 */
-	if (size_b1 > size_b0) {	/* SDRAM Bank 1 is bigger - map first   */
-
-		memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-		memctl->memc_br3 =
-			(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
-		if (size_b0 > 0) {
-			/*
-			 * Position Bank 0 immediately above Bank 1
-			 */
-			memctl->memc_or2 =
-				((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-			memctl->memc_br2 =
-				((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
-				+ size_b1;
-		} else {
-			unsigned long reg;
-
-			/*
-			 * No bank 0
-			 *
-			 * invalidate bank
-			 */
-			memctl->memc_br2 = 0;
-
-			/* adjust refresh rate depending on SDRAM type, one bank */
-			reg = memctl->memc_mptpr;
-			reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
-			memctl->memc_mptpr = reg;
-		}
-
-	} else {			/* SDRAM Bank 0 is bigger - map first   */
-
-		memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-		memctl->memc_br2 =
-				(CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-
-		if (size_b1 > 0) {
-			/*
-			 * Position Bank 1 immediately above Bank 0
-			 */
-			memctl->memc_or3 =
-					((-size_b1) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-			memctl->memc_br3 =
-					((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
-					+ size_b0;
-		} else {
-			unsigned long reg;
-
-			/*
-			 * No bank 1
-			 *
-			 * invalidate bank
-			 */
-			memctl->memc_br3 = 0;
-
-			/* adjust refresh rate depending on SDRAM type, one bank */
-			reg = memctl->memc_mptpr;
-			reg >>= 1;	/* reduce to CONFIG_SYS_MPTPR_1BK_8K / _4K */
-			memctl->memc_mptpr = reg;
-		}
-	}
-
-	udelay (10000);
-
-	return (size_b0 + size_b1);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-						   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size(base, maxsize));
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* HW-ID Table (Bits: 2^9;2^7;2^5) */
-#define HW_ID_0 0x0000
-#define HW_ID_1 0x0020
-#define HW_ID_2 0x0080
-#define HW_ID_3 0x00a0
-#define HW_ID_4 0x0200
-#define HW_ID_5 0x0220
-#define HW_ID_6 0x0280
-#define HW_ID_7 0x02a0
-
-void read_hw_vers ()
-{
-	unsigned short rd_msk = 0x02A0;
-
-	/* HW-ID pin-definition */
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	immr->im_ioport.iop_pddir &= ~(rd_msk);
-	immr->im_ioport.iop_pdpar &= ~(rd_msk);
-
-	/* debug printf("State of PD: %x\n",immr->im_ioport.iop_pddat); */
-
-	/* Check the HW-ID */
-	printf ("HW-Version: ");
-	switch (immr->im_ioport.iop_pddat & rd_msk) {
-	case HW_ID_0:
-		printf ("V0.1 - V0.3 / W97238-Q3162-A1-1-2\n");
-		break;
-	case HW_ID_1:
-		printf ("V0.9 / W50037-Q1-D6-1\n");
-		break;
-	case HW_ID_2:
-		printf ("NOT USED - assuming ID#2\n");
-		break;
-	case HW_ID_3:
-		printf ("NOT USED - assuming ID#3\n");
-		break;
-	case HW_ID_4:
-		printf ("NOT USED - assuming ID#4\n");
-		break;
-	case HW_ID_5:
-		printf ("NOT USED - assuming ID#5\n");
-		break;
-	case HW_ID_6:
-		printf ("NOT USED - assuming ID#6\n");
-		break;
-	case HW_ID_7:
-		printf ("NOT USED - assuming ID#7\n");
-		break;
-	default:
-		printf ("###Error###\n");
-		break;
-	}
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/etx094/flash.c b/board/etx094/flash.c
deleted file mode 100644
index 0958e73..0000000
--- a/board/etx094/flash.c
+++ /dev/null
@@ -1,687 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(vu_long *addr, flash_info_t *info);
-static int write_word(flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets(ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
-	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size_b0;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i)
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-#ifdef CONFIG_FLASH_16BIT
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
-		BR_MS_GPCM | BR_V | BR_PS_16; /* 16 Bit data port */
-#else
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) |
-		BR_MS_GPCM | BR_V;
-#endif
-
-	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE,
-			&flash_info[0]);
-
-	flash_get_offsets(CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-	memctl->memc_br1 = 0;		/* invalidate bank 1 */
-
-	flash_info[0].size = size_b0;
-
-	return size_b0;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets(ulong base, flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return;
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00002000);
-
-		return;
-	}
-
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-#ifdef CONFIG_FLASH_16BIT
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-#else
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-#endif
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--)
-			info->start[i] = base + i * 0x00020000;
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info(flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf("FUJITSU ");
-		break;
-	case FLASH_MAN_SST:
-		printf("SST ");
-		break;
-	case FLASH_MAN_STM:
-		printf("STM ");
-		break;
-	default:
-		printf("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM400B:
-		printf("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:
-		printf("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:
-		printf("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:
-		printf("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:
-		printf("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:
-		printf("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	case FLASH_SST200A:
-		printf("39xF200A (2M = 128K x 16)\n");
-		break;
-	case FLASH_SST400A:
-		printf("39xF400A (4M = 256K x 16)\n");
-		break;
-	case FLASH_SST800A:
-		printf("39xF800A (8M = 512K x 16)\n");
-		break;
-	case FLASH_STM800AB:
-		printf("M29W800AB (8M = 512K x 16)\n");
-		break;
-	default:
-		printf("Unknown Chip Type\n");
-		break;
-	}
-
-	printf("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf("\n   ");
-		printf(" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf("\n");
-	return;
-}
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size(vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-#ifdef CONFIG_FLASH_16BIT
-	vu_short *s_addr = (vu_short *)addr;
-	s_addr[0x5555] = 0x00AA;
-	s_addr[0x2AAA] = 0x0055;
-	s_addr[0x5555] = 0x0090;
-	value = s_addr[0];
-	value = value|(value<<16);
-#else
-	addr[0x5555] = 0x00AA00AA;
-	addr[0x2AAA] = 0x00550055;
-	addr[0x5555] = 0x00900090;
-	value = addr[0];
-#endif
-
-	switch (value) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case SST_MANUFACT:
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	case STM_MANUFACT:
-		info->flash_id = FLASH_MAN_STM;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return 0;			/* no or unknown flash	*/
-	}
-#ifdef CONFIG_FLASH_16BIT
-	value = s_addr[1];
-	value = value|(value<<16);
-#else
-	value = addr[1];			/* device ID		*/
-#endif
-
-	switch (value) {
-	case AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-#ifdef CONFIG_FLASH_16BIT
-		info->sector_count = 19;
-		info->size = 0x00100000;	/* => 1 MB */
-#else
-		info->sector_count = 19;
-		info->size = 0x00200000;	/* => 2 MB	*/
-#endif
-		break;
-
-	case AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-
-	case AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-#ifdef CONFIG_FLASH_16BIT
-		info->sector_count = 35;
-		info->size = 0x00200000;	/* => 2 MB	*/
-#else
-		info->sector_count = 35;
-		info->size = 0x00400000;	/* => 4 MB	*/
-#endif
-
-		break;
-	case SST_ID_xF200A:
-		info->flash_id += FLASH_SST200A;
-		info->sector_count = 64;	/* 39xF200A (2M = 128K x 16) */
-		info->size = 0x00080000;
-		break;
-	case SST_ID_xF400A:
-		info->flash_id += FLASH_SST400A;
-		info->sector_count = 128;	/* 39xF400A (4M = 256K x 16) */
-		info->size = 0x00100000;
-		break;
-	case SST_ID_xF800A:
-		info->flash_id += FLASH_SST800A;
-		info->sector_count = 256;	/* 39xF800A (8M = 512K x 16) */
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-	case STM_ID_x800AB:
-		info->flash_id += FLASH_STM800AB;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return 0;			/* => no or unknown flash */
-
-	}
-
-	if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
-		printf("** ERROR: sector count %d > max (%d) **\n",
-			info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
-		info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00002000);
-	} else {	/* AMD and Fujitsu types */
-		/* set up sector start address table */
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type */
-#ifdef CONFIG_FLASH_16BIT
-
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++)
-				info->start[i] = base +
-					(i * 0x00010000) - 0x00030000;
-#else
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00008000;
-			info->start[2] = base + 0x0000C000;
-			info->start[3] = base + 0x00010000;
-			for (i = 4; i < info->sector_count; i++)
-				info->start[i] = base +
-					(i * 0x00020000) - 0x00060000;
-#endif
-		} else {
-			/* set sector offsets for top boot block type	*/
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00008000;
-			info->start[i--] = base + info->size - 0x0000C000;
-			info->start[i--] = base + info->size - 0x00010000;
-			for (; i >= 0; i--)
-				info->start[i] = base + i * 0x00020000;
-		}
-
-		/* check for protected sectors */
-		for (i = 0; i < info->sector_count; i++) {
-			/*
-			 * read sector protection at sector address:
-			 * (A7 .. A0) = 0x02
-			 * D0 = 1 if protected
-			 */
-#ifdef CONFIG_FLASH_16BIT
-			s_addr = (volatile unsigned short *)(info->start[i]);
-			info->protect[i] = s_addr[2] & 1;
-#else
-			addr = (volatile unsigned long *)(info->start[i]);
-			info->protect[i] = addr[2] & 1;
-#endif
-		}
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-#ifdef CONFIG_FLASH_16BIT
-		s_addr = (volatile unsigned short *)(info->start[0]);
-		*s_addr = 0x00F0;	/* reset bank */
-#else
-		addr = (volatile unsigned long *)info->start[0];
-		*addr = 0x00F000F0;	/* reset bank */
-#endif
-
-	}
-	return info->size;
-}
-
-int	flash_erase(flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long *)(info->start[0]);
-	int flag, prot, sect;
-	ulong start, now, last;
-#ifdef CONFIG_FLASH_16BIT
-	vu_short *s_addr = (vu_short *)addr;
-#endif
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN)
-			printf("- missing\n");
-		else
-			printf("- no sectors to erase\n");
-		return 1;
-	}
-/*#ifndef CONFIG_FLASH_16BIT
-	ulong type;
-	type = (info->flash_id & FLASH_VENDMASK);
-	if ((type != FLASH_MAN_SST) && (type != FLASH_MAN_STM)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return;
-	}
-#endif*/
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot) {
-		printf("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf("\n");
-	}
-
-	start = get_timer(0);
-	last  = start;
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-#ifdef CONFIG_FLASH_16BIT
-			vu_short *s_sect_addr = (vu_short *)(info->start[sect]);
-#else
-			vu_long	*sect_addr = (vu_long *)(info->start[sect]);
-#endif
-			/* Disable interrupts which might cause a timeout */
-			flag = disable_interrupts();
-
-#ifdef CONFIG_FLASH_16BIT
-
-			/*printf("\ns_sect_addr=%x",s_sect_addr);*/
-			s_addr[0x5555] = 0x00AA;
-			s_addr[0x2AAA] = 0x0055;
-			s_addr[0x5555] = 0x0080;
-			s_addr[0x5555] = 0x00AA;
-			s_addr[0x2AAA] = 0x0055;
-			s_sect_addr[0] = 0x0030;
-#else
-			addr[0x5555] = 0x00AA00AA;
-			addr[0x2AAA] = 0x00550055;
-			addr[0x5555] = 0x00800080;
-			addr[0x5555] = 0x00AA00AA;
-			addr[0x2AAA] = 0x00550055;
-			sect_addr[0] = 0x00300030;
-#endif
-			/* re-enable interrupts if necessary */
-			if (flag)
-				enable_interrupts();
-
-			/* wait at least 80us - let's wait 1 ms */
-			udelay(1000);
-
-#ifdef CONFIG_FLASH_16BIT
-			while ((s_sect_addr[0] & 0x0080) != 0x0080) {
-#else
-			while ((sect_addr[0] & 0x00800080) != 0x00800080) {
-#endif
-				now = get_timer(start);
-				if (now > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					printf("Timeout\n");
-					return 1;
-				}
-				/* show every second that we're waiting */
-				if ((now - last) > 1000) {
-					putc('.');
-					last = now;
-				}
-			}
-		}
-	}
-
-	/* reset to read mode */
-	addr = (volatile unsigned long *)info->start[0];
-#ifdef CONFIG_FLASH_16BIT
-	s_addr[0] = 0x00F0;	/* reset bank */
-#else
-	addr[0] = 0x00F000F0;	/* reset bank */
-#endif
-
-	printf(" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- * 4 - Flash not identified
- */
-
-int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return 4;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	l = addr - wp;
-
-	if (l != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp)
-			data = (data << 8) | (*(uchar *)cp);
-
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 4; ++i, ++cp)
-			data = (data << 8) | (*(uchar *)cp);
-
-		rc = write_word(info, wp, data);
-
-		if (rc != 0)
-			return rc;
-
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i)
-			data = (data << 8) | *src++;
-
-		rc = write_word(info, wp, data);
-		if (rc != 0)
-			return rc;
-
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0)
-		return 0;
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp)
-		data = (data << 8) | (*(uchar *)cp);
-
-	return write_word(info, wp, data);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word(flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long *)(info->start[0]);
-
-#ifdef CONFIG_FLASH_16BIT
-	vu_short high_data;
-	vu_short low_data;
-	vu_short *s_addr = (vu_short *)addr;
-#endif
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data)
-		return 2;
-
-#ifdef CONFIG_FLASH_16BIT
-	/* Write the 16 higher-bits */
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	high_data = ((data>>16) & 0x0000ffff);
-
-	s_addr[0x5555] = 0x00AA;
-	s_addr[0x2AAA] = 0x0055;
-	s_addr[0x5555] = 0x00A0;
-
-	*((vu_short *)dest) = high_data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer(0);
-	while ((*((vu_short *)dest) & 0x0080) != (high_data & 0x0080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
-			return 1;
-	}
-
-	/* Write the 16 lower-bits */
-#endif
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-#ifdef CONFIG_FLASH_16BIT
-	dest += 0x2;
-	low_data = (data & 0x0000ffff);
-
-	s_addr[0x5555] = 0x00AA;
-	s_addr[0x2AAA] = 0x0055;
-	s_addr[0x5555] = 0x00A0;
-	*((vu_short *)dest) = low_data;
-
-#else
-	addr[0x5555] = 0x00AA00AA;
-	addr[0x2AAA] = 0x00550055;
-	addr[0x5555] = 0x00A000A0;
-	*((vu_long *)dest) = data;
-#endif
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer(0);
-
-#ifdef CONFIG_FLASH_16BIT
-	while ((*((vu_short *)dest) & 0x0080) != (low_data & 0x0080)) {
-#else
-	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-#endif
-
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT)
-			return 1;
-	}
-	return 0;
-}
diff --git a/board/evb64260/serial.c b/board/evb64260/serial.c
index 9fd4298..b9ca1d7 100644
--- a/board/evb64260/serial.c
+++ b/board/evb64260/serial.c
@@ -139,20 +139,13 @@
 
 #endif /* CONFIG_MPSC */
 
-static void evb64260_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device evb64260_serial_drv = {
 	.name	= "evb64260_serial",
 	.start	= evb64260_serial_init,
 	.stop	= NULL,
 	.setbrg	= evb64260_serial_setbrg,
 	.putc	= evb64260_serial_putc,
-	.puts	= evb64260_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= evb64260_serial_getc,
 	.tstc	= evb64260_serial_tstc,
 };
diff --git a/board/evb64260/u-boot.lds b/board/evb64260/u-boot.lds
index 2d031ef..eac9c07 100644
--- a/board/evb64260/u-boot.lds
+++ b/board/evb64260/u-boot.lds
@@ -70,9 +70,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/fads/u-boot.lds b/board/fads/u-boot.lds
index 9ea0674..6022dbc 100644
--- a/board/fads/u-boot.lds
+++ b/board/fads/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/flagadm/u-boot.lds b/board/flagadm/u-boot.lds
index fd4e8a5..c8d3894 100644
--- a/board/flagadm/u-boot.lds
+++ b/board/flagadm/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/flagadm/u-boot.lds.debug b/board/flagadm/u-boot.lds.debug
index c771102..92796e6 100644
--- a/board/flagadm/u-boot.lds.debug
+++ b/board/flagadm/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/freescale/common/Makefile b/board/freescale/common/Makefile
index 54cb098..36f7c4f 100644
--- a/board/freescale/common/Makefile
+++ b/board/freescale/common/Makefile
@@ -53,6 +53,7 @@
 COBJS-$(CONFIG_P3041DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P4080DS)		+= ics307_clk.o
 COBJS-$(CONFIG_P5020DS)		+= ics307_clk.o
+COBJS-$(CONFIG_VSC_CROSSBAR)    += vsc3316_3308.o
 
 # deal with common files for P-series corenet based devices
 SUBLIB-$(CONFIG_P2041RDB)	+= p_corenet/libp_corenet.o
diff --git a/board/freescale/common/ngpixis.c b/board/freescale/common/ngpixis.c
index 276ae3c..3c75028 100644
--- a/board/freescale/common/ngpixis.c
+++ b/board/freescale/common/ngpixis.c
@@ -237,13 +237,17 @@
 	return 0;
 }
 
-U_BOOT_CMD(
-	pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
-	"Reset the board using the FPGA sequencer",
+#ifdef CONFIG_SYS_LONGHELP
+static char pixis_help_text[] =
 	"- hard reset to default bank\n"
 	"pixis_reset altbank - reset to alternate bank\n"
 #ifdef DEBUG
 	"pixis_reset dump - display the PIXIS registers\n"
 #endif
-	"pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n"
+	"pixis_reset sysclk <SYSCLK_freq> - reset with SYSCLK frequency(KHz)\n";
+#endif
+
+U_BOOT_CMD(
+	pixis_reset, CONFIG_SYS_MAXARGS, 1, pixis_reset_cmd,
+	"Reset the board using the FPGA sequencer", pixis_help_text
 	);
diff --git a/board/freescale/common/qixis.c b/board/freescale/common/qixis.c
index 6cd7e51..c92902a 100644
--- a/board/freescale/common/qixis.c
+++ b/board/freescale/common/qixis.c
@@ -32,22 +32,22 @@
 
 void qixis_reset(void)
 {
-	QIXIS_WRITE(rst_ctl, 0x83);
+	QIXIS_WRITE(rst_ctl, QIXIS_RST_CTL_RESET);
 }
 
 void qixis_bank_reset(void)
 {
-	QIXIS_WRITE(rcfg_ctl, 0x20);
-	QIXIS_WRITE(rcfg_ctl, 0x21);
+	QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_IDLE);
+	QIXIS_WRITE(rcfg_ctl, QIXIS_RCFG_CTL_RECONFIG_START);
 }
 
-/* Set the boot bank to the power-on default bank0 */
+/* Set the boot bank to the power-on default bank */
 void clear_altbank(void)
 {
 	u8 reg;
 
 	reg = QIXIS_READ(brdcfg[0]);
-	reg = reg & ~QIXIS_LBMAP_MASK;
+	reg = (reg & ~QIXIS_LBMAP_MASK) | QIXIS_LBMAP_DFLTBANK;
 	QIXIS_WRITE(brdcfg[0], reg);
 }
 
@@ -85,11 +85,11 @@
 	printf("ctl_sys	= %02x\n", QIXIS_READ(ctl_sys));
 	printf("rcw_ctl = %02x\n", QIXIS_READ(rcw_ctl));
 	printf("present = %02x\n", QIXIS_READ(present));
+	printf("present2 = %02x\n", QIXIS_READ(present2));
 	printf("clk_spd = %02x\n", QIXIS_READ(clk_spd));
 	printf("stat_dut = %02x\n", QIXIS_READ(stat_dut));
 	printf("stat_sys = %02x\n", QIXIS_READ(stat_sys));
 	printf("stat_alrm = %02x\n", QIXIS_READ(stat_alrm));
-	printf("ctl_sys2 = %02x\n", QIXIS_READ(ctl_sys2));
 }
 #endif
 
@@ -115,7 +115,8 @@
 		for (i = 0; i < ARRAY_SIZE(period); i++) {
 			if (strcmp(argv[2], period[i]) == 0) {
 				/* disable watchdog */
-				QIXIS_WRITE(rcfg_ctl, rcfg & ~0x08);
+				QIXIS_WRITE(rcfg_ctl,
+					rcfg & ~QIXIS_RCFG_CTL_WATCHDOG_ENBLE);
 				QIXIS_WRITE(watch, ((i<<2) - 1));
 				QIXIS_WRITE(rcfg_ctl, rcfg);
 				return 0;
diff --git a/board/freescale/common/qixis.h b/board/freescale/common/qixis.h
index 7a0268a..b98b180 100644
--- a/board/freescale/common/qixis.h
+++ b/board/freescale/common/qixis.h
@@ -26,7 +26,7 @@
 	u8 stat_sys;
 	u8 stat_alrm;
 	u8 present;
-	u8 ctl_sys2;
+	u8 present2;    /* Presence Status Register 2,0x0c */
 	u8 rcw_ctl;
 	u8 ctl_led;
 	u8 i2cblk;
@@ -86,12 +86,6 @@
 	u8 res15[16];
 };
 
-#define QIXIS_BASE		0xffdf0000
-#define QIXIS_LBMAP_SWITCH	7
-#define QIXIS_LBMAP_MASK	0x0f
-#define QIXIS_LBMAP_SHIFT	0
-#define QIXIS_LBMAP_ALTBANK	0x04
-
 u8 qixis_read(unsigned int reg);
 void qixis_write(unsigned int reg, u8 value);
 
diff --git a/board/freescale/common/vsc3316_3308.c b/board/freescale/common/vsc3316_3308.c
new file mode 100644
index 0000000..7868565
--- /dev/null
+++ b/board/freescale/common/vsc3316_3308.c
@@ -0,0 +1,184 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include "vsc3316_3308.h"
+
+#define REVISION_ID_REG		0x7E
+#define INTERFACE_MODE_REG		0x79
+#define CURRENT_PAGE_REGISTER		0x7F
+#define CONNECTION_CONFIG_PAGE		0x00
+#define INPUT_STATE_REG		0x13
+#define GLOBAL_INPUT_ISE1		0x51
+#define GLOBAL_INPUT_ISE2		0x52
+#define GLOBAL_INPUT_LOS		0x55
+#define GLOBAL_CORE_CNTRL		0x5D
+#define OUTPUT_MODE_PAGE		0x23
+#define CORE_CONTROL_PAGE		0x25
+#define CORE_CONFIG_REG		0x75
+
+int vsc_if_enable(unsigned int vsc_addr)
+{
+	u8 data;
+
+	debug("VSC:Configuring VSC at I2C address 0x%2x"
+			" for 2-wire interface\n", vsc_addr);
+
+	/* enable 2-wire Serial InterFace (I2C) */
+	data = 0x02;
+	return i2c_write(vsc_addr, INTERFACE_MODE_REG, 1, &data, 1);
+}
+
+int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+		unsigned int num_con)
+{
+	unsigned int i;
+	u8 rev_id = 0;
+	int ret;
+
+	debug("VSC:Initializing VSC3316 at I2C address 0x%2x"
+		" for Tx\n", vsc_addr);
+
+	ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
+	if (ret < 0) {
+		printf("VSC:0x%x could not read REV_ID from device.\n",
+			vsc_addr);
+		return ret;
+	}
+
+	if (rev_id != 0xab) {
+		printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
+			vsc_addr);
+		return -ENODEV;
+	}
+
+	ret = vsc_if_enable(vsc_addr);
+	if (ret) {
+		printf("VSC:0x%x could not configured for 2-wire I/F.\n",
+			vsc_addr);
+		return ret;
+	}
+
+	/* config connections - page 0x00 */
+	i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
+
+	/* Making crosspoint connections, by connecting required
+	 * input to output */
+	for (i = 0; i < num_con ; i++)
+		i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
+
+	/* input state - page 0x13 */
+	i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
+	/* Configuring the required input of the switch */
+	for (i = 0; i < num_con ; i++)
+		i2c_reg_write(vsc_addr, con_arr[i][0], 0x80);
+
+	/* Setting Global Input LOS threshold value */
+	i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
+
+	/* config output mode - page 0x23 */
+	i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
+	/* Turn ON the Output driver correspond to required output*/
+	for (i = 0; i < num_con ; i++)
+		i2c_reg_write(vsc_addr,  con_arr[i][1], 0);
+
+	/* configure global core control register, Turn on Global core power */
+	i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
+
+	vsc_wp_config(vsc_addr);
+
+	return 0;
+}
+
+int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+		unsigned int num_con)
+{
+	unsigned int i;
+	u8 rev_id = 0;
+	int ret;
+
+	debug("VSC:Initializing VSC3308 at I2C address 0x%x"
+		" for Tx\n", vsc_addr);
+
+	ret = i2c_read(vsc_addr, REVISION_ID_REG, 1, &rev_id, 1);
+	if (ret < 0) {
+		printf("VSC:0x%x could not read REV_ID from device.\n",
+			vsc_addr);
+		return ret;
+	}
+
+	if (rev_id != 0xab) {
+		printf("VSC: device at address 0x%x is not VSC3316/3308.\n",
+			vsc_addr);
+		return -ENODEV;
+	}
+
+	ret = vsc_if_enable(vsc_addr);
+	if (ret) {
+		printf("VSC:0x%x could not configured for 2-wire I/F.\n",
+			vsc_addr);
+		return ret;
+	}
+
+	/* config connections - page 0x00 */
+	i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, CONNECTION_CONFIG_PAGE);
+
+	/* Making crosspoint connections, by connecting required
+	 * input to output */
+	for (i = 0; i < num_con ; i++)
+		i2c_reg_write(vsc_addr, con_arr[i][1], con_arr[i][0]);
+
+	/*Configure Global Input ISE and gain */
+	i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE1, 0x12);
+	i2c_reg_write(vsc_addr, GLOBAL_INPUT_ISE2, 0x12);
+
+	/* input state - page 0x13 */
+	i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, INPUT_STATE_REG);
+	/* Turning ON the required input of the switch */
+	for (i = 0; i < num_con ; i++)
+		i2c_reg_write(vsc_addr, con_arr[i][0], 0);
+
+	/* Setting Global Input LOS threshold value */
+	i2c_reg_write(vsc_addr, GLOBAL_INPUT_LOS, 0x60);
+
+	/* config output mode - page 0x23 */
+	i2c_reg_write(vsc_addr, CURRENT_PAGE_REGISTER, OUTPUT_MODE_PAGE);
+	/* Turn ON the Output driver correspond to required output*/
+	for (i = 0; i < num_con ; i++)
+		i2c_reg_write(vsc_addr,  con_arr[i][1], 0);
+
+	/* configure global core control register, Turn on Global core power */
+	i2c_reg_write(vsc_addr, GLOBAL_CORE_CNTRL, 0);
+
+	vsc_wp_config(vsc_addr);
+
+	return 0;
+}
+
+void vsc_wp_config(unsigned int vsc_addr)
+{
+	debug("VSC:Configuring VSC at address:0x%x for WP\n", vsc_addr);
+
+	/* For new crosspoint configuration to occur, WP bit of
+	 * CORE_CONFIG_REG should be set 1 and then reset to 0 */
+	i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x01);
+	i2c_reg_write(vsc_addr, CORE_CONFIG_REG, 0x0);
+}
diff --git a/board/freescale/common/vsc3316_3308.h b/board/freescale/common/vsc3316_3308.h
new file mode 100644
index 0000000..effd66d
--- /dev/null
+++ b/board/freescale/common/vsc3316_3308.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __VSC_CROSSBAR_H_
+#define __VSC_CROSSBAR_H	1_
+
+#include <common.h>
+#include <i2c.h>
+#include <errno.h>
+
+int vsc_if_enable(unsigned int vsc_addr);
+int vsc3316_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+		unsigned int num_con);
+int vsc3308_config(unsigned int vsc_addr, const int8_t con_arr[][2],
+		unsigned int num_con);
+void vsc_wp_config(unsigned int vsc_addr);
+
+#endif	/* __VSC_CROSSBAR_H_ */
diff --git a/board/freescale/m5208evbe/u-boot.lds b/board/freescale/m5208evbe/u-boot.lds
index 6e39be1..2c151f2 100644
--- a/board/freescale/m5208evbe/u-boot.lds
+++ b/board/freescale/m5208evbe/u-boot.lds
@@ -69,9 +69,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.lds
index 3e9f4c3..dbd6f6a 100644
--- a/board/freescale/m52277evb/u-boot.lds
+++ b/board/freescale/m52277evb/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds
index d39e734..00932ae 100644
--- a/board/freescale/m5235evb/u-boot.lds
+++ b/board/freescale/m5235evb/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m5249evb/u-boot.lds b/board/freescale/m5249evb/u-boot.lds
index c4039ed..d054f20 100644
--- a/board/freescale/m5249evb/u-boot.lds
+++ b/board/freescale/m5249evb/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m5253demo/u-boot.lds b/board/freescale/m5253demo/u-boot.lds
index cbd2831..f8116f6 100644
--- a/board/freescale/m5253demo/u-boot.lds
+++ b/board/freescale/m5253demo/u-boot.lds
@@ -69,9 +69,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m5253evbe/u-boot.lds b/board/freescale/m5253evbe/u-boot.lds
index c4039ed..d054f20 100644
--- a/board/freescale/m5253evbe/u-boot.lds
+++ b/board/freescale/m5253evbe/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m5271evb/u-boot.lds b/board/freescale/m5271evb/u-boot.lds
index 4717036..133ec01 100644
--- a/board/freescale/m5271evb/u-boot.lds
+++ b/board/freescale/m5271evb/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m5272c3/u-boot.lds b/board/freescale/m5272c3/u-boot.lds
index c4039ed..d054f20 100644
--- a/board/freescale/m5272c3/u-boot.lds
+++ b/board/freescale/m5272c3/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m5275evb/u-boot.lds b/board/freescale/m5275evb/u-boot.lds
index 6c2dfe8..fc68de1 100644
--- a/board/freescale/m5275evb/u-boot.lds
+++ b/board/freescale/m5275evb/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m5282evb/u-boot.lds b/board/freescale/m5282evb/u-boot.lds
index 4ba1964..ad49874 100644
--- a/board/freescale/m5282evb/u-boot.lds
+++ b/board/freescale/m5282evb/u-boot.lds
@@ -29,6 +29,9 @@
   {
     arch/m68k/cpu/mcf52x2/start.o	(.text*)
 
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/env_embedded.o      (.text*)
+
     *(.text*)
   }
   _etext = .;
@@ -65,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m53017evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds
index 80935f2..d25a36f 100644
--- a/board/freescale/m53017evb/u-boot.lds
+++ b/board/freescale/m53017evb/u-boot.lds
@@ -71,9 +71,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m5329evb/u-boot.lds b/board/freescale/m5329evb/u-boot.lds
index 40af8bc..6616594 100644
--- a/board/freescale/m5329evb/u-boot.lds
+++ b/board/freescale/m5329evb/u-boot.lds
@@ -69,9 +69,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m5373evb/u-boot.lds b/board/freescale/m5373evb/u-boot.lds
index 19342ac..bc40fd6 100644
--- a/board/freescale/m5373evb/u-boot.lds
+++ b/board/freescale/m5373evb/u-boot.lds
@@ -69,9 +69,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/etx094/Makefile b/board/freescale/m54418twr/Makefile
similarity index 91%
rename from board/etx094/Makefile
rename to board/freescale/m54418twr/Makefile
index 6dc495c..1e53f48 100644
--- a/board/etx094/Makefile
+++ b/board/freescale/m54418twr/Makefile
@@ -1,6 +1,5 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright 2010-2012 Freescale Semiconductor, Inc.
+# TsiChung Liew (Tsi-Chung.Liew@freescale.com)
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -25,7 +24,7 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	= $(BOARD).o flash.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/bmw/config.mk b/board/freescale/m54418twr/config.mk
similarity index 73%
rename from board/bmw/config.mk
rename to board/freescale/m54418twr/config.mk
index a1a44e5..a592335 100644
--- a/board/bmw/config.mk
+++ b/board/freescale/m54418twr/config.mk
@@ -1,6 +1,5 @@
-#
-# (C) Copyright 2001
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright 2010-2012 Freescale Semiconductor, Inc.
+# TsiChung Liew (Tsi-Chung.Liew@freescale.com)
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -21,10 +20,6 @@
 # MA 02111-1307 USA
 #
 
-#
-# BMW board
-#
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
 
-# NOTE: The flags below affect how the BCM570x driver is compiled
-PLATFORM_CPPFLAGS += -DEMBEDDED -DBIG_ENDIAN_HOST -DINCLUDE_5701_AX_FIX=1\
-		     -DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
diff --git a/board/freescale/m54418twr/m54418twr.c b/board/freescale/m54418twr/m54418twr.c
new file mode 100644
index 0000000..6e57bef
--- /dev/null
+++ b/board/freescale/m54418twr/m54418twr.c
@@ -0,0 +1,129 @@
+/*
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <asm/io.h>
+#include <asm/immap.h>
+#include <mmc.h>
+#include <fsl_esdhc.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	/*
+	 * need to to:
+	 * Check serial flash size. if 2mb evb, else 8mb demo
+	 */
+	puts("Board: ");
+	puts("Freescale MCF54418 Tower System\n");
+	return 0;
+};
+
+phys_size_t initdram(int board_type)
+{
+	u32 dramsize;
+
+#if defined(CONFIG_SERIAL_BOOT)
+	/*
+	 * Serial Boot: The dram is already initialized in start.S
+	 * only require to return DRAM size
+	 */
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+#else
+	sdramc_t *sdram = (sdramc_t *)(MMAP_SDRAM);
+	ccm_t *ccm = (ccm_t *)MMAP_CCM;
+	gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	pm_t *pm = (pm_t *) MMAP_PM;
+	u32 i;
+
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+
+	for (i = 0x13; i < 0x20; i++) {
+		if (dramsize == (1 << i))
+			break;
+	}
+
+	out_8(&pm->pmcr0, 0x2E);
+	out_8(&gpio->mscr_sdram, 1);
+
+	clrbits_be16(&ccm->misccr2, CCM_MISCCR2_FBHALF);
+	setbits_be16(&ccm->misccr2, CCM_MISCCR2_DDR2CLK);
+
+	out_be32(&sdram->rcrcr, 0x40000000);
+	out_be32(&sdram->padcr, 0x01030203);
+
+	out_be32(&sdram->cr00, 0x01010101);
+	out_be32(&sdram->cr01, 0x00000101);
+	out_be32(&sdram->cr02, 0x01010100);
+	out_be32(&sdram->cr03, 0x01010000);
+	out_be32(&sdram->cr04, 0x00010101);
+	out_be32(&sdram->cr06, 0x00010100);
+	out_be32(&sdram->cr07, 0x00000001);
+	out_be32(&sdram->cr08, 0x01000001);
+	out_be32(&sdram->cr09, 0x00000100);
+	out_be32(&sdram->cr10, 0x00010001);
+	out_be32(&sdram->cr11, 0x00000200);
+	out_be32(&sdram->cr12, 0x01000002);
+	out_be32(&sdram->cr13, 0x00000000);
+	out_be32(&sdram->cr14, 0x00000100);
+	out_be32(&sdram->cr15, 0x02000100);
+	out_be32(&sdram->cr16, 0x02000407);
+	out_be32(&sdram->cr17, 0x02030007);
+	out_be32(&sdram->cr18, 0x02000100);
+	out_be32(&sdram->cr19, 0x0A030203);
+	out_be32(&sdram->cr20, 0x00020708);
+	out_be32(&sdram->cr21, 0x00050008);
+	out_be32(&sdram->cr22, 0x04030002);
+	out_be32(&sdram->cr23, 0x00000004);
+	out_be32(&sdram->cr24, 0x020A0000);
+	out_be32(&sdram->cr25, 0x0C00000E);
+	out_be32(&sdram->cr26, 0x00002004);
+	out_be32(&sdram->cr28, 0x00100010);
+	out_be32(&sdram->cr29, 0x00100010);
+	out_be32(&sdram->cr31, 0x07990000);
+	out_be32(&sdram->cr40, 0x00000000);
+	out_be32(&sdram->cr41, 0x00C80064);
+	out_be32(&sdram->cr42, 0x44520002);
+	out_be32(&sdram->cr43, 0x00C80023);
+	out_be32(&sdram->cr45, 0x0000C350);
+	out_be32(&sdram->cr56, 0x04000000);
+	out_be32(&sdram->cr57, 0x03000304);
+	out_be32(&sdram->cr58, 0x40040000);
+	out_be32(&sdram->cr59, 0xC0004004);
+	out_be32(&sdram->cr60, 0x0642C000);
+	out_be32(&sdram->cr61, 0x00000642);
+	asm("tpf");
+
+	out_be32(&sdram->cr09, 0x01000100);
+
+	udelay(100);
+#endif
+	return dramsize;
+};
+
+int testdram(void)
+{
+	return 0;
+}
diff --git a/board/etx094/u-boot.lds b/board/freescale/m54418twr/u-boot.lds
similarity index 73%
rename from board/etx094/u-boot.lds
rename to board/freescale/m54418twr/u-boot.lds
index 8465937..36a4c26 100644
--- a/board/etx094/u-boot.lds
+++ b/board/freescale/m54418twr/u-boot.lds
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000-2010
+ * (C) Copyright 2000
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -21,25 +21,14 @@
  * MA 02111-1307 USA
  */
 
-OUTPUT_ARCH(powerpc)
+OUTPUT_ARCH(m68k)
 
 SECTIONS
 {
   /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
   .text      :
   {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-    net/libnet.o			(.text*)
-    arch/powerpc/cpu/mpc8xx/libmpc8xx.o	(.text*)
-    *(.text.vsprintf)
-
-    . = env_offset;
-    common/env_embedded.o		(.text*)
+    arch/m68k/cpu/mcf5445x/start.o		(.text*)
 
     *(.text*)
   }
@@ -54,16 +43,18 @@
   . = (. + 0x00FF) & 0xFFFFFF00;
   _erotext = .;
   PROVIDE (erotext = .);
+
   .reloc   :
   {
+    __got_start = .;
+    KEEP(*(.got))
+    __got_end = .;
     _GOT2_TABLE_ = .;
     KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
     _FIXUP_TABLE_ = .;
     KEEP(*(.fixup))
   }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
   __fixup_entries = (. - _FIXUP_TABLE_)>>2;
 
   .data    :
@@ -75,10 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
@@ -93,12 +85,14 @@
   __init_end = .;
 
   __bss_start = .;
-  .bss (NOLOAD)       :
+  .bss  (NOLOAD)     :
   {
+   _sbss = .;
    *(.bss*)
    *(.sbss*)
    *(COMMON)
    . = ALIGN(4);
+   _ebss = .;
   }
   __bss_end__ = . ;
   PROVIDE (end = .);
diff --git a/board/freescale/m54451evb/u-boot.lds b/board/freescale/m54451evb/u-boot.lds
index 45924b7..91328a4 100644
--- a/board/freescale/m54451evb/u-boot.lds
+++ b/board/freescale/m54451evb/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m54455evb/u-boot.lds
index f341449..36a4c26 100644
--- a/board/freescale/m54455evb/u-boot.lds
+++ b/board/freescale/m54455evb/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m547xevb/u-boot.lds b/board/freescale/m547xevb/u-boot.lds
index 5472689..de4d0eb 100644
--- a/board/freescale/m547xevb/u-boot.lds
+++ b/board/freescale/m547xevb/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/m548xevb/u-boot.lds b/board/freescale/m548xevb/u-boot.lds
index cf3f38c..fbbe0c5 100644
--- a/board/freescale/m548xevb/u-boot.lds
+++ b/board/freescale/m548xevb/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/freescale/mpc8313erdb/mpc8313erdb.c b/board/freescale/mpc8313erdb/mpc8313erdb.c
index 730ec4e..1071803 100644
--- a/board/freescale/mpc8313erdb/mpc8313erdb.c
+++ b/board/freescale/mpc8313erdb/mpc8313erdb.c
@@ -70,22 +70,22 @@
 #ifndef CONFIG_NAND_SPL
 static struct pci_region pci_regions[] = {
 	{
-		bus_start: CONFIG_SYS_PCI1_MEM_BASE,
-		phys_start: CONFIG_SYS_PCI1_MEM_PHYS,
-		size: CONFIG_SYS_PCI1_MEM_SIZE,
-		flags: PCI_REGION_MEM | PCI_REGION_PREFETCH
+		.bus_start = CONFIG_SYS_PCI1_MEM_BASE,
+		.phys_start = CONFIG_SYS_PCI1_MEM_PHYS,
+		.size = CONFIG_SYS_PCI1_MEM_SIZE,
+		.flags = PCI_REGION_MEM | PCI_REGION_PREFETCH
 	},
 	{
-		bus_start: CONFIG_SYS_PCI1_MMIO_BASE,
-		phys_start: CONFIG_SYS_PCI1_MMIO_PHYS,
-		size: CONFIG_SYS_PCI1_MMIO_SIZE,
-		flags: PCI_REGION_MEM
+		.bus_start = CONFIG_SYS_PCI1_MMIO_BASE,
+		.phys_start = CONFIG_SYS_PCI1_MMIO_PHYS,
+		.size = CONFIG_SYS_PCI1_MMIO_SIZE,
+		.flags = PCI_REGION_MEM
 	},
 	{
-		bus_start: CONFIG_SYS_PCI1_IO_BASE,
-		phys_start: CONFIG_SYS_PCI1_IO_PHYS,
-		size: CONFIG_SYS_PCI1_IO_SIZE,
-		flags: PCI_REGION_IO
+		.bus_start = CONFIG_SYS_PCI1_IO_BASE,
+		.phys_start = CONFIG_SYS_PCI1_IO_PHYS,
+		.size = CONFIG_SYS_PCI1_IO_SIZE,
+		.flags = PCI_REGION_IO
 	}
 };
 
diff --git a/board/freescale/mpc8568mds/bcsr.c b/board/freescale/mpc8568mds/bcsr.c
index 30676e1..2a172cc 100644
--- a/board/freescale/mpc8568mds/bcsr.c
+++ b/board/freescale/mpc8568mds/bcsr.c
@@ -25,7 +25,7 @@
 
 #include "bcsr.h"
 
-void enable_8568mds_duart()
+void enable_8568mds_duart(void)
 {
 	volatile uint* duart_mux	= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0060);
 	volatile uint* devices		= (uint *)(CONFIG_SYS_CCSRBAR + 0xe0070);
@@ -36,21 +36,21 @@
 	bcsr[5] |= 0x01;		/* Enable Duart in BCSR*/
 }
 
-void enable_8568mds_flash_write()
+void enable_8568mds_flash_write(void)
 {
 	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[9] |= 0x01;
 }
 
-void disable_8568mds_flash_write()
+void disable_8568mds_flash_write(void)
 {
 	volatile u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
 	bcsr[9] &= ~(0x01);
 }
 
-void enable_8568mds_qe_mdio()
+void enable_8568mds_qe_mdio(void)
 {
 	u8 *bcsr = (u8 *)(CONFIG_SYS_BCSR);
 
diff --git a/board/freescale/mpc8569mds/bcsr.c b/board/freescale/mpc8569mds/bcsr.c
index b688e5c..37d0c5f 100644
--- a/board/freescale/mpc8569mds/bcsr.c
+++ b/board/freescale/mpc8569mds/bcsr.c
@@ -25,17 +25,17 @@
 
 #include "bcsr.h"
 
-void enable_8569mds_flash_write()
+void enable_8569mds_flash_write(void)
 {
 	setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP);
 }
 
-void disable_8569mds_flash_write()
+void disable_8569mds_flash_write(void)
 {
 	clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP);
 }
 
-void enable_8569mds_qe_uec()
+void enable_8569mds_qe_uec(void)
 {
 #if defined(CONFIG_SYS_UCC_RGMII_MODE)
 	setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7),
@@ -60,7 +60,7 @@
 #endif
 }
 
-void disable_8569mds_brd_eeprom_write_protect()
+void disable_8569mds_brd_eeprom_write_protect(void)
 {
 	clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), BCSR7_BRD_WRT_PROTECT);
 }
diff --git a/board/freescale/mx31ads/u-boot.lds b/board/freescale/mx31ads/u-boot.lds
index 91ffdbe..5267729 100644
--- a/board/freescale/mx31ads/u-boot.lds
+++ b/board/freescale/mx31ads/u-boot.lds
@@ -57,9 +57,11 @@
 	}
 
 	. = ALIGN(4);
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 
diff --git a/board/sbc8560/Makefile b/board/freescale/t4qds/Makefile
similarity index 80%
rename from board/sbc8560/Makefile
rename to board/freescale/t4qds/Makefile
index ce01560..ff09ffa 100644
--- a/board/sbc8560/Makefile
+++ b/board/freescale/t4qds/Makefile
@@ -1,9 +1,5 @@
 #
-# (C) Copyright 2004-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
-# Added support for Wind River SBC8560 board
+# Copyright 2012 Freescale Semiconductor, Inc.
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -15,7 +11,7 @@
 #
 # This program is distributed in the hope that it will be useful,
 # but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 # GNU General Public License for more details.
 #
 # You should have received a copy of the GNU General Public License
@@ -29,9 +25,11 @@
 LIB	= $(obj)lib$(BOARD).o
 
 COBJS-y	+= $(BOARD).o
+COBJS-y	+= ddr.o
+COBJS-$(CONFIG_T4240QDS)+= eth.o
+COBJS-$(CONFIG_PCI)	+= pci.o
 COBJS-y	+= law.o
 COBJS-y	+= tlb.o
-COBJS-$(CONFIG_FSL_DDR1) += ddr.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS-y))
@@ -40,6 +38,12 @@
 $(LIB):	$(obj).depend $(OBJS) $(SOBJS)
 	$(call cmd_link_o_target, $(OBJS))
 
+clean:
+	rm -f $(OBJS) $(SOBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
 #########################################################################
 
 # defines $(obj).depend target
diff --git a/board/freescale/t4qds/ddr.c b/board/freescale/t4qds/ddr.c
new file mode 100644
index 0000000..692616a
--- /dev/null
+++ b/board/freescale/t4qds/ddr.c
@@ -0,0 +1,186 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 or later as published by the Free Software Foundation.
+ */
+
+#include <common.h>
+#include <i2c.h>
+#include <hwconfig.h>
+#include <asm/mmu.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_ddr_dimm_params.h>
+#include <asm/fsl_law.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+struct board_specific_parameters {
+	u32 n_ranks;
+	u32 datarate_mhz_high;
+	u32 clk_adjust;
+	u32 wrlvl_start;
+	u32 wrlvl_ctl_2;
+	u32 wrlvl_ctl_3;
+	u32 cpo;
+	u32 write_data_delay;
+	u32 force_2T;
+};
+
+/*
+ * This table contains all valid speeds we want to override with board
+ * specific parameters. datarate_mhz_high values need to be in ascending order
+ * for each n_ranks group.
+ */
+static const struct board_specific_parameters udimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz|adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+	{2,  1350,    5,     7, 0x0809090b, 0x0c0c0d09,   0xff,    2,  0},
+	{2,  1666,    5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+	{2,  2140,    5,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+	{1,  1350,    5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+	{1,  1700,    5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+	{1,  1900,    4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
+	{1,  2140,    4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+	{}
+};
+
+/*
+ * The three slots have slightly different timing. The center values are good
+ * for all slots. We use identical speed tables for them. In future use, if
+ * DIMMs require separated tables, make more entries as needed.
+ */
+static const struct board_specific_parameters *udimms[] = {
+	udimm0,
+};
+
+static const struct board_specific_parameters rdimm0[] = {
+	/*
+	 * memory controller 0
+	 *   num|  hi|  clk| wrlvl |   wrlvl   |  wrlvl | cpo  |wrdata|2T
+	 * ranks| mhz|adjst| start |   ctl2    |  ctl3  |      |delay |
+	 */
+	{4,  1350,    5,     9, 0x08070605, 0x07080805,   0xff,    2,  0},
+	{4,  1666,    5,     8, 0x08070605, 0x07080805,   0xff,    2,  0},
+	{4,  2140,    5,     8, 0x08070605, 0x07081805,   0xff,    2,  0},
+	{2,  1350,    5,     7, 0x0809090b, 0x0c0c0d09,   0xff,    2,  0},
+	{2,  1666,    5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+	{2,  2140,    5,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+	{1,  1350,    5,     8, 0x0809090b, 0x0c0c0d0a,   0xff,    2,  0},
+	{1,  1700,    5,     8, 0x080a0a0c, 0x0c0d0e0a,   0xff,    2,  0},
+	{1,  1900,    4,     8, 0x080a0a0c, 0x0e0e0f0a,   0xff,    2,  0},
+	{1,  2140,    4,     8, 0x090a0b0c, 0x0e0f100b,   0xff,    2,  0},
+	{}
+};
+
+/*
+ * The three slots have slightly different timing. See comments above.
+ */
+static const struct board_specific_parameters *rdimms[] = {
+	rdimm0,
+};
+
+void fsl_ddr_board_options(memctl_options_t *popts,
+				dimm_params_t *pdimm,
+				unsigned int ctrl_num)
+{
+	const struct board_specific_parameters *pbsp, *pbsp_highest = NULL;
+	ulong ddr_freq;
+
+	if (ctrl_num > 2) {
+		printf("Not supported controller number %d\n", ctrl_num);
+		return;
+	}
+	if (!pdimm->n_ranks)
+		return;
+
+	/*
+	 * we use identical timing for all slots. If needed, change the code
+	 * to  pbsp = rdimms[ctrl_num] or pbsp = udimms[ctrl_num];
+	 */
+	if (popts->registered_dimm_en)
+		pbsp = rdimms[0];
+	else
+		pbsp = udimms[0];
+
+
+	/* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr
+	 * freqency and n_banks specified in board_specific_parameters table.
+	 */
+	ddr_freq = get_ddr_freq(0) / 1000000;
+	while (pbsp->datarate_mhz_high) {
+		if (pbsp->n_ranks == pdimm->n_ranks) {
+			if (ddr_freq <= pbsp->datarate_mhz_high) {
+				popts->cpo_override = pbsp->cpo;
+				popts->write_data_delay =
+					pbsp->write_data_delay;
+				popts->clk_adjust = pbsp->clk_adjust;
+				popts->wrlvl_start = pbsp->wrlvl_start;
+				popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+				popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+				popts->twoT_en = pbsp->force_2T;
+				goto found;
+			}
+			pbsp_highest = pbsp;
+		}
+		pbsp++;
+	}
+
+	if (pbsp_highest) {
+		printf("Error: board specific timing not found "
+			"for data rate %lu MT/s\n"
+			"Trying to use the highest speed (%u) parameters\n",
+			ddr_freq, pbsp_highest->datarate_mhz_high);
+		popts->cpo_override = pbsp_highest->cpo;
+		popts->write_data_delay = pbsp_highest->write_data_delay;
+		popts->clk_adjust = pbsp_highest->clk_adjust;
+		popts->wrlvl_start = pbsp_highest->wrlvl_start;
+		popts->wrlvl_ctl_2 = pbsp->wrlvl_ctl_2;
+		popts->wrlvl_ctl_3 = pbsp->wrlvl_ctl_3;
+		popts->twoT_en = pbsp_highest->force_2T;
+	} else {
+		panic("DIMM is not supported by this board");
+	}
+found:
+	/*
+	 * Factors to consider for half-strength driver enable:
+	 *	- number of DIMMs installed
+	 */
+	popts->half_strength_driver_enable = 0;
+	/*
+	 * Write leveling override
+	 */
+	popts->wrlvl_override = 1;
+	popts->wrlvl_sample = 0xf;
+
+	/*
+	 * Rtt and Rtt_WR override
+	 */
+	popts->rtt_override = 0;
+
+	/* Enable ZQ calibration */
+	popts->zq_en = 1;
+
+	/* DHC_EN =1, ODT = 75 Ohm */
+	popts->ddr_cdr1 = DDR_CDR1_DHC_EN | DDR_CDR1_ODT(DDR_CDR_ODT_75ohm);
+	popts->ddr_cdr2 = DDR_CDR2_ODT(DDR_CDR_ODT_75ohm);
+}
+
+phys_size_t initdram(int board_type)
+{
+	phys_size_t dram_size;
+
+	puts("Initializing....using SPD\n");
+
+	dram_size = fsl_ddr_sdram();
+
+	dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+	dram_size *= 0x100000;
+
+	puts("    DDR: ");
+	return dram_size;
+}
diff --git a/board/freescale/t4qds/eth.c b/board/freescale/t4qds/eth.c
new file mode 100644
index 0000000..a49c7d4
--- /dev/null
+++ b/board/freescale/t4qds/eth.c
@@ -0,0 +1,495 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <netdev.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <malloc.h>
+#include <fm_eth.h>
+#include <fsl_mdio.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/fsl_dtsec.h>
+#include <asm/fsl_serdes.h>
+#include "../common/qixis.h"
+#include "../common/fman.h"
+
+#include "t4240qds_qixis.h"
+
+#define EMI_NONE	0xFFFFFFFF
+#define EMI1_RGMII	0
+#define EMI1_SLOT1	1
+#define EMI1_SLOT2	2
+#define EMI1_SLOT3	3
+#define EMI1_SLOT4	4
+#define EMI1_SLOT5	5
+#define EMI1_SLOT7	7
+#define EMI2		8 /* tmp, FIXME */
+/* Slot6 and Slot8 do not have EMI connections */
+
+static int mdio_mux[NUM_FM_PORTS];
+
+static const char *mdio_names[] = {
+	"T4240QDS_MDIO0",
+	"T4240QDS_MDIO1",
+	"T4240QDS_MDIO2",
+	"T4240QDS_MDIO3",
+	"T4240QDS_MDIO4",
+	"T4240QDS_MDIO5",
+	"NULL",
+	"T4240QDS_MDIO7",
+	"T4240QDS_10GC",
+};
+
+static u8 lane_to_slot_fsm1[] = {1, 1, 1, 1, 2, 2, 2, 2};
+static u8 lane_to_slot_fsm2[] = {3, 3, 3, 3, 4, 4, 4, 4};
+
+static const char *t4240qds_mdio_name_for_muxval(u8 muxval)
+{
+	return mdio_names[muxval];
+}
+
+struct mii_dev *mii_dev_for_muxval(u8 muxval)
+{
+	struct mii_dev *bus;
+	const char *name = t4240qds_mdio_name_for_muxval(muxval);
+
+	if (!name) {
+		printf("No bus for muxval %x\n", muxval);
+		return NULL;
+	}
+
+	bus = miiphy_get_dev_by_name(name);
+
+	if (!bus) {
+		printf("No bus by name %s\n", name);
+		return NULL;
+	}
+
+	return bus;
+}
+
+struct t4240qds_mdio {
+	u8 muxval;
+	struct mii_dev *realbus;
+};
+
+static void t4240qds_mux_mdio(u8 muxval)
+{
+	u8 brdcfg4;
+	if ((muxval < 6) || (muxval == 7)) {
+		brdcfg4 = QIXIS_READ(brdcfg[4]);
+		brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
+		brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
+		QIXIS_WRITE(brdcfg[4], brdcfg4);
+	}
+}
+
+static int t4240qds_mdio_read(struct mii_dev *bus, int addr, int devad,
+				int regnum)
+{
+	struct t4240qds_mdio *priv = bus->priv;
+
+	t4240qds_mux_mdio(priv->muxval);
+
+	return priv->realbus->read(priv->realbus, addr, devad, regnum);
+}
+
+static int t4240qds_mdio_write(struct mii_dev *bus, int addr, int devad,
+				int regnum, u16 value)
+{
+	struct t4240qds_mdio *priv = bus->priv;
+
+	t4240qds_mux_mdio(priv->muxval);
+
+	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
+}
+
+static int t4240qds_mdio_reset(struct mii_dev *bus)
+{
+	struct t4240qds_mdio *priv = bus->priv;
+
+	return priv->realbus->reset(priv->realbus);
+}
+
+static int t4240qds_mdio_init(char *realbusname, u8 muxval)
+{
+	struct t4240qds_mdio *pmdio;
+	struct mii_dev *bus = mdio_alloc();
+
+	if (!bus) {
+		printf("Failed to allocate T4240QDS MDIO bus\n");
+		return -1;
+	}
+
+	pmdio = malloc(sizeof(*pmdio));
+	if (!pmdio) {
+		printf("Failed to allocate T4240QDS private data\n");
+		free(bus);
+		return -1;
+	}
+
+	bus->read = t4240qds_mdio_read;
+	bus->write = t4240qds_mdio_write;
+	bus->reset = t4240qds_mdio_reset;
+	sprintf(bus->name, t4240qds_mdio_name_for_muxval(muxval));
+
+	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
+
+	if (!pmdio->realbus) {
+		printf("No bus with name %s\n", realbusname);
+		free(bus);
+		free(pmdio);
+		return -1;
+	}
+
+	pmdio->muxval = muxval;
+	bus->priv = pmdio;
+
+	return mdio_register(bus);
+}
+
+void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa,
+				enum fm_port port, int offset)
+{
+	if (mdio_mux[port] == EMI1_RGMII)
+		fdt_set_phy_handle(blob, prop, pa, "phy_rgmii");
+
+	/* TODO: will do with dts */
+}
+
+void fdt_fixup_board_enet(void *fdt)
+{
+	/* TODO: will do with dts */
+}
+
+int board_eth_init(bd_t *bis)
+{
+#if defined(CONFIG_FMAN_ENET)
+	int i;
+	struct memac_mdio_info dtsec_mdio_info;
+	struct memac_mdio_info tgec_mdio_info;
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_prtcl_s1, srds_prtcl_s2;
+
+	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+					FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+	srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+					FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+
+	/* Initialize the mdio_mux array so we can recognize empty elements */
+	for (i = 0; i < NUM_FM_PORTS; i++)
+		mdio_mux[i] = EMI_NONE;
+
+	dtsec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM2_DTSEC_MDIO_ADDR;
+
+	dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME;
+
+	/* Register the 1G MDIO bus */
+	fm_memac_mdio_init(bis, &dtsec_mdio_info);
+
+	tgec_mdio_info.regs =
+		(struct memac_mdio_controller *)CONFIG_SYS_FM2_TGEC_MDIO_ADDR;
+	tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME;
+
+	/* Register the 10G MDIO bus */
+	fm_memac_mdio_init(bis, &tgec_mdio_info);
+
+	/* Register the muxing front-ends to the MDIO buses */
+	t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII);
+	t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT1);
+	t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT2);
+	t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3);
+	t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
+	t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
+	t4240qds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
+	t4240qds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
+
+
+	switch (srds_prtcl_s1) {
+	case 1:
+	case 2:
+	case 4:
+		/* XAUI/HiGig in Slot1 and Slot2 */
+		fm_info_set_phy_address(FM1_10GEC1, FM1_10GEC1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_10GEC2, FM1_10GEC2_PHY_ADDR);
+		break;
+	case 28:
+	case 36:
+		/* SGMII in Slot1 and Slot2 */
+		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
+			fm_info_set_phy_address(FM1_DTSEC9,
+						SGMII_CARD_PORT4_PHY_ADDR);
+			fm_info_set_phy_address(FM1_DTSEC10,
+						SGMII_CARD_PORT3_PHY_ADDR);
+		}
+		break;
+	case 38:
+		fm_info_set_phy_address(FM1_DTSEC5, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, QSGMII_CARD_PHY_ADDR);
+		if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
+			fm_info_set_phy_address(FM1_DTSEC9,
+						QSGMII_CARD_PHY_ADDR);
+			fm_info_set_phy_address(FM1_DTSEC10,
+						QSGMII_CARD_PHY_ADDR);
+		}
+		break;
+	case 40:
+	case 46:
+	case 48:
+		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		if ((srds_prtcl_s2 != 56) && (srds_prtcl_s2 != 57)) {
+			fm_info_set_phy_address(FM1_DTSEC10,
+						SGMII_CARD_PORT3_PHY_ADDR);
+			fm_info_set_phy_address(FM1_DTSEC9,
+						SGMII_CARD_PORT4_PHY_ADDR);
+		}
+		fm_info_set_phy_address(FM1_DTSEC1, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC2, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC3, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM1_DTSEC4, QSGMII_CARD_PHY_ADDR);
+		break;
+	default:
+		puts("Invalid SerDes1 protocol for T4240QDS\n");
+		break;
+	}
+
+	for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) {
+		int idx = i - FM1_DTSEC1, lane, slot;
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_SGMII:
+			lane = serdes_get_first_lane(FSL_SRDS_1,
+						SGMII_FM1_DTSEC1 + idx);
+			if (lane < 0)
+				break;
+			slot = lane_to_slot_fsm1[lane];
+			debug("FM1@DTSEC%u expects SGMII in slot %u\n",
+				idx + 1, slot);
+			if (QIXIS_READ(present2) & (1 << (slot - 1)))
+				fm_disable_port(i);
+			switch (slot) {
+			case 1:
+				mdio_mux[i] = EMI1_SLOT1;
+				fm_info_set_mdio(i,
+					mii_dev_for_muxval(mdio_mux[i]));
+				break;
+			case 2:
+				mdio_mux[i] = EMI1_SLOT2;
+				fm_info_set_mdio(i,
+					mii_dev_for_muxval(mdio_mux[i]));
+				break;
+			};
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			/* FM1 DTSEC5 routes to RGMII with EC2 */
+			debug("FM1@DTSEC%u is RGMII at address %u\n",
+				idx + 1, 2);
+			if (i == FM1_DTSEC5)
+				fm_info_set_phy_address(i, 2);
+			mdio_mux[i] = EMI1_RGMII;
+			fm_info_set_mdio(i,
+				mii_dev_for_muxval(mdio_mux[i]));
+			break;
+		default:
+			break;
+		}
+	}
+
+	for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) {
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_XGMII:
+			mdio_mux[i] = EMI2;
+			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+			break;
+		default:
+			break;
+		}
+	}
+
+
+#if (CONFIG_SYS_NUM_FMAN == 2)
+	switch (srds_prtcl_s2) {
+	case 1:
+	case 2:
+	case 4:
+		/* XAUI/HiGig in Slot3 and Slot4 */
+		fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
+		fm_info_set_phy_address(FM2_10GEC2, FM2_10GEC2_PHY_ADDR);
+		break;
+	case 7:
+	case 13:
+	case 14:
+	case 16:
+	case 22:
+	case 23:
+	case 25:
+	case 26:
+		/* XAUI/HiGig in Slot3, SGMII in Slot4 */
+		fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
+	case 28:
+	case 36:
+		/* SGMII in Slot3 and Slot4 */
+		fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+		break;
+	case 38:
+		/* QSGMII in Slot3 and Slot4 */
+		fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC5, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC6, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC9, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC10, QSGMII_CARD_PHY_ADDR);
+		break;
+	case 40:
+	case 46:
+	case 48:
+		/* SGMII in Slot3 */
+		fm_info_set_phy_address(FM2_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC9, SGMII_CARD_PORT4_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
+		/* QSGMII in Slot4 */
+		fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+		break;
+	case 50:
+	case 52:
+	case 54:
+		fm_info_set_phy_address(FM2_10GEC1, FM2_10GEC1_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC1, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC2, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC3, QSGMII_CARD_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC4, QSGMII_CARD_PHY_ADDR);
+		break;
+	case 56:
+	case 57:
+		/* XFI in Slot3, SGMII in Slot4 */
+		fm_info_set_phy_address(FM1_10GEC1, XFI_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM1_10GEC2, XFI_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM2_10GEC2, XFI_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM2_10GEC1, XFI_CARD_PORT4_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC2, SGMII_CARD_PORT2_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC3, SGMII_CARD_PORT3_PHY_ADDR);
+		fm_info_set_phy_address(FM2_DTSEC4, SGMII_CARD_PORT4_PHY_ADDR);
+		break;
+	default:
+		puts("Invalid SerDes2 protocol for T4240QDS\n");
+		break;
+	}
+
+	for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) {
+		int idx = i - FM2_DTSEC1, lane, slot;
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_SGMII:
+			lane = serdes_get_first_lane(FSL_SRDS_2,
+						SGMII_FM2_DTSEC1 + idx);
+			if (lane < 0)
+				break;
+			slot = lane_to_slot_fsm2[lane];
+			debug("FM2@DTSEC%u expects SGMII in slot %u\n",
+				idx + 1, slot);
+			if (QIXIS_READ(present2) & (1 << (slot - 1)))
+				fm_disable_port(i);
+			switch (slot) {
+			case 3:
+				mdio_mux[i] = EMI1_SLOT3;
+				fm_info_set_mdio(i,
+					mii_dev_for_muxval(mdio_mux[i]));
+				break;
+			case 4:
+				mdio_mux[i] = EMI1_SLOT4;
+				fm_info_set_mdio(i,
+					mii_dev_for_muxval(mdio_mux[i]));
+				break;
+			};
+			break;
+		case PHY_INTERFACE_MODE_RGMII:
+			/*
+			 * If DTSEC5 is RGMII, then it's routed via via EC1 to
+			 * the first on-board RGMII port.  If DTSEC6 is RGMII,
+			 * then it's routed via via EC2 to the second on-board
+			 * RGMII port.
+			 */
+			debug("FM2@DTSEC%u is RGMII at address %u\n",
+				idx + 1, i == FM2_DTSEC5 ? 1 : 2);
+			fm_info_set_phy_address(i, i == FM2_DTSEC5 ? 1 : 2);
+			mdio_mux[i] = EMI1_RGMII;
+			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+			break;
+		default:
+			break;
+		}
+	}
+
+	for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) {
+		switch (fm_info_get_enet_if(i)) {
+		case PHY_INTERFACE_MODE_XGMII:
+			mdio_mux[i] = EMI2;
+			fm_info_set_mdio(i, mii_dev_for_muxval(mdio_mux[i]));
+			break;
+		default:
+			break;
+		}
+	}
+#endif /* CONFIG_SYS_NUM_FMAN */
+
+	cpu_eth_init(bis);
+#endif /* CONFIG_FMAN_ENET */
+
+	return pci_eth_init(bis);
+}
diff --git a/board/freescale/t4qds/law.c b/board/freescale/t4qds/law.c
new file mode 100644
index 0000000..5debcf6
--- /dev/null
+++ b/board/freescale/t4qds/law.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/fsl_law.h>
+#include <asm/mmu.h>
+
+struct law_entry law_table[] = {
+	SET_LAW(CONFIG_SYS_FLASH_BASE_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_BMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_BMAN),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_LAW(CONFIG_SYS_QMAN_MEM_PHYS, LAW_SIZE_32M, LAW_TRGT_IF_QMAN),
+#endif
+	SET_LAW(QIXIS_BASE_PHYS, LAW_SIZE_4K, LAW_TRGT_IF_IFC),
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_LAW(CONFIG_SYS_DCSRBAR_PHYS, LAW_SIZE_4M, LAW_TRGT_IF_DCSR),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE_PHYS
+	SET_LAW(CONFIG_SYS_NAND_BASE_PHYS, LAW_SIZE_1M, LAW_TRGT_IF_IFC),
+#endif
+};
+
+int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/arch/arm/include/asm/arch-lpc2292/hardware.h b/board/freescale/t4qds/pci.c
similarity index 70%
copy from arch/arm/include/asm/arch-lpc2292/hardware.h
copy to board/freescale/t4qds/pci.c
index 5e227e3..fc00b4a 100644
--- a/arch/arm/include/asm/arch-lpc2292/hardware.h
+++ b/board/freescale/t4qds/pci.c
@@ -1,9 +1,5 @@
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
 /*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -24,10 +20,20 @@
  * MA 02111-1307 USA
  */
 
-#if defined(CONFIG_LPC2292)
-#include <asm/arch-lpc2292/lpc2292_registers.h>
-#else
-#error No hardware file defined for this configuration
-#endif
+#include <common.h>
+#include <command.h>
+#include <pci.h>
+#include <asm/fsl_pci.h>
+#include <libfdt.h>
+#include <fdt_support.h>
+#include <asm/fsl_serdes.h>
 
-#endif /* __ASM_ARCH_HARDWARE_H */
+void pci_init_board(void)
+{
+	fsl_pcie_init_board(0);
+}
+
+void pci_of_setup(void *blob, bd_t *bd)
+{
+	FT_FSL_PCI_SETUP;
+}
diff --git a/board/freescale/t4qds/t4240qds_qixis.h b/board/freescale/t4qds/t4240qds_qixis.h
new file mode 100644
index 0000000..efb718d
--- /dev/null
+++ b/board/freescale/t4qds/t4240qds_qixis.h
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __T4020QDS_QIXIS_H__
+#define __T4020QDS_QIXIS_H__
+
+/* Definitions of QIXIS Registers for T4020QDS */
+
+/* BRDCFG4[4:7]] select EC1 and EC2 as a pair */
+#define BRDCFG4_EMISEL_MASK		0xE0
+#define BRDCFG4_EMISEL_SHIFT		5
+
+/* SYSCLK */
+#define QIXIS_SYSCLK_66			0x0
+#define QIXIS_SYSCLK_83			0x1
+#define QIXIS_SYSCLK_100		0x2
+#define QIXIS_SYSCLK_125		0x3
+#define QIXIS_SYSCLK_133		0x4
+#define QIXIS_SYSCLK_150		0x5
+#define QIXIS_SYSCLK_160		0x6
+#define QIXIS_SYSCLK_166		0x7
+
+/* DDRCLK */
+#define QIXIS_DDRCLK_66			0x0
+#define QIXIS_DDRCLK_100		0x1
+#define QIXIS_DDRCLK_125		0x2
+#define QIXIS_DDRCLK_133		0x3
+
+#define BRDCFG5_RESET			0x00
+
+#define BRDCFG12_SD3EN_MASK		0x20
+#define BRDCFG12_SD3MX_MASK		0x08
+#define BRDCFG12_SD3MX_SLOT5		0x08
+#define BRDCFG12_SD3MX_SLOT6		0x00
+#define BRDCFG12_SD4EN_MASK		0x04
+#define BRDCFG12_SD4MX_MASK		0x03
+#define BRDCFG12_SD4MX_SLOT7		0x02
+#define BRDCFG12_SD4MX_SLOT8		0x01
+#define BRDCFG12_SD4MX_AURO_SATA	0x00
+#endif
diff --git a/board/freescale/t4qds/t4qds.c b/board/freescale/t4qds/t4qds.c
new file mode 100644
index 0000000..88b8ced
--- /dev/null
+++ b/board/freescale/t4qds/t4qds.c
@@ -0,0 +1,395 @@
+/*
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <i2c.h>
+#include <netdev.h>
+#include <linux/compiler.h>
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_law.h>
+#include <asm/fsl_serdes.h>
+#include <asm/fsl_portals.h>
+#include <asm/fsl_liodn.h>
+#include <fm_eth.h>
+
+#include "../common/qixis.h"
+#include "../common/vsc3316_3308.h"
+#include "t4qds.h"
+#include "t4240qds_qixis.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	u8 sw;
+	struct cpu_type *cpu = gd->cpu;
+	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+	unsigned int i;
+
+	printf("Board: %sQDS, ", cpu->name);
+	printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+		QIXIS_READ(id), QIXIS_READ(arch), QIXIS_READ(scver));
+
+	sw = QIXIS_READ(brdcfg[0]);
+	sw = (sw & QIXIS_LBMAP_MASK) >> QIXIS_LBMAP_SHIFT;
+
+	if (sw < 0x8)
+		printf("vBank: %d\n", sw);
+	else if (sw == 0x8)
+		puts("Promjet\n");
+	else if (sw == 0x9)
+		puts("NAND\n");
+	else
+		printf("invalid setting of SW%u\n", QIXIS_LBMAP_SWITCH);
+
+	/* Display the RCW, so that no one gets confused as to what RCW
+	 * we're actually using for this boot.
+	 */
+	puts("Reset Configuration Word (RCW):");
+	for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+		u32 rcw = in_be32(&gur->rcwsr[i]);
+
+		if ((i % 4) == 0)
+			printf("\n       %08x:", i * 4);
+		printf(" %08x", rcw);
+	}
+	puts("\n");
+
+	/*
+	 * Display the actual SERDES reference clocks as configured by the
+	 * dip switches on the board.  Note that the SWx registers could
+	 * technically be set to force the reference clocks to match the
+	 * values that the SERDES expects (or vice versa).  For now, however,
+	 * we just display both values and hope the user notices when they
+	 * don't match.
+	 */
+	puts("SERDES Reference Clocks: ");
+	sw = QIXIS_READ(brdcfg[2]);
+	for (i = 0; i < MAX_SERDES; i++) {
+		static const char *freq[] = {
+			"100", "125", "156.25", "161.1328125"};
+		unsigned int clock = (sw >> (2 * i)) & 3;
+
+		printf("SERDES%u=%sMHz ", i+1, freq[clock]);
+	}
+	puts("\n");
+
+	return 0;
+}
+
+int select_i2c_ch_pca9547(u8 ch)
+{
+	int ret;
+
+	ret = i2c_write(I2C_MUX_PCA_ADDR_PRI, 0, 1, &ch, 1);
+	if (ret) {
+		puts("PCA: failed to select proper channel\n");
+		return ret;
+	}
+
+	return 0;
+}
+
+/* Configure Crossbar switches for Front-Side SerDes Ports */
+int config_frontside_crossbar_vsc3316(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_prtcl_s1, srds_prtcl_s2;
+	int ret;
+
+	ret = select_i2c_ch_pca9547(I2C_MUX_CH_VSC3316_FS);
+	if (ret)
+		return ret;
+
+	srds_prtcl_s1 = in_be32(&gur->rcwsr[4]) &
+			FSL_CORENET2_RCWSR4_SRDS1_PRTCL;
+	srds_prtcl_s1 >>= FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT;
+	if (srds_prtcl_s1) {
+		ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm1_tx, 8);
+		if (ret)
+			return ret;
+		ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm1_rx, 8);
+		if (ret)
+			return ret;
+	}
+
+	srds_prtcl_s2 = in_be32(&gur->rcwsr[4]) &
+				FSL_CORENET2_RCWSR4_SRDS2_PRTCL;
+	srds_prtcl_s2 >>= FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT;
+	if (srds_prtcl_s2) {
+		ret = vsc3316_config(VSC3316_FSM_TX_ADDR, vsc3316_fsm2_tx, 8);
+		if (ret)
+			return ret;
+		ret = vsc3316_config(VSC3316_FSM_RX_ADDR, vsc3316_fsm2_rx, 8);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
+int config_backside_crossbar_mux(void)
+{
+	ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 srds_prtcl_s3, srds_prtcl_s4;
+	u8 brdcfg;
+
+	srds_prtcl_s3 = in_be32(&gur->rcwsr[4]) &
+			FSL_CORENET2_RCWSR4_SRDS3_PRTCL;
+	srds_prtcl_s3 >>= FSL_CORENET2_RCWSR4_SRDS3_PRTCL_SHIFT;
+	switch (srds_prtcl_s3) {
+	case 0:
+		/* SerDes3 is not enabled */
+		break;
+	case 2:
+	case 9:
+	case 10:
+		/* SD3(0:7) => SLOT5(0:7) */
+		brdcfg = QIXIS_READ(brdcfg[12]);
+		brdcfg &= ~BRDCFG12_SD3MX_MASK;
+		brdcfg |= BRDCFG12_SD3MX_SLOT5;
+		QIXIS_WRITE(brdcfg[12], brdcfg);
+		break;
+	case 4:
+	case 6:
+	case 8:
+	case 12:
+	case 14:
+	case 16:
+	case 17:
+	case 19:
+	case 20:
+		/* SD3(4:7) => SLOT6(0:3) */
+		brdcfg = QIXIS_READ(brdcfg[12]);
+		brdcfg &= ~BRDCFG12_SD3MX_MASK;
+		brdcfg |= BRDCFG12_SD3MX_SLOT6;
+		QIXIS_WRITE(brdcfg[12], brdcfg);
+		break;
+	default:
+		printf("WARNING: unsupported for SerDes3 Protocol %d\n",
+				srds_prtcl_s3);
+		return -1;
+	}
+
+	srds_prtcl_s4 = in_be32(&gur->rcwsr[4]) &
+			FSL_CORENET2_RCWSR4_SRDS4_PRTCL;
+	srds_prtcl_s4 >>= FSL_CORENET2_RCWSR4_SRDS4_PRTCL_SHIFT;
+	switch (srds_prtcl_s4) {
+	case 0:
+		/* SerDes4 is not enabled */
+		break;
+	case 2:
+		/* 10b, SD4(0:7) => SLOT7(0:7) */
+		brdcfg = QIXIS_READ(brdcfg[12]);
+		brdcfg &= ~BRDCFG12_SD4MX_MASK;
+		brdcfg |= BRDCFG12_SD4MX_SLOT7;
+		QIXIS_WRITE(brdcfg[12], brdcfg);
+		break;
+	case 4:
+	case 6:
+	case 8:
+		/* x1b, SD4(4:7) => SLOT8(0:3) */
+		brdcfg = QIXIS_READ(brdcfg[12]);
+		brdcfg &= ~BRDCFG12_SD4MX_MASK;
+		brdcfg |= BRDCFG12_SD4MX_SLOT8;
+		QIXIS_WRITE(brdcfg[12], brdcfg);
+		break;
+	case 10:
+	case 12:
+	case 14:
+	case 16:
+	case 18:
+		/* 00b, SD4(4:5) => AURORA, SD4(6:7) => SATA */
+		brdcfg = QIXIS_READ(brdcfg[12]);
+		brdcfg &= ~BRDCFG12_SD4MX_MASK;
+		brdcfg |= BRDCFG12_SD4MX_AURO_SATA;
+		QIXIS_WRITE(brdcfg[12], brdcfg);
+		break;
+	default:
+		printf("WARNING: unsupported for SerDes4 Protocol %d\n",
+				srds_prtcl_s4);
+		return -1;
+	}
+
+	return 0;
+}
+
+int board_early_init_r(void)
+{
+	const unsigned int flashbase = CONFIG_SYS_FLASH_BASE;
+	const u8 flash_esel = find_tlb_idx((void *)flashbase, 1);
+
+	/*
+	 * Remap Boot flash + PROMJET region to caching-inhibited
+	 * so that flash can be erased properly.
+	 */
+
+	/* Flush d-cache and invalidate i-cache of any FLASH data */
+	flush_dcache();
+	invalidate_icache();
+
+	/* invalidate existing TLB entry for flash + promjet */
+	disable_tlb(flash_esel);
+
+	set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, flash_esel, BOOKE_PAGESZ_256M, 1);
+
+	set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
+	setup_portals();
+#endif
+
+	/* Disable remote I2C connectoin */
+	QIXIS_WRITE(brdcfg[5], BRDCFG5_RESET);
+
+	/* Configure board SERDES ports crossbar */
+	config_frontside_crossbar_vsc3316();
+	config_backside_crossbar_mux();
+	select_i2c_ch_pca9547(I2C_MUX_CH_DEFAULT);
+
+	return 0;
+}
+
+unsigned long get_board_sys_clk(void)
+{
+	u8 sysclk_conf = QIXIS_READ(brdcfg[1]);
+
+	switch (sysclk_conf & 0x0F) {
+	case QIXIS_SYSCLK_83:
+		return 83333333;
+	case QIXIS_SYSCLK_100:
+		return 100000000;
+	case QIXIS_SYSCLK_125:
+		return 125000000;
+	case QIXIS_SYSCLK_133:
+		return 133333333;
+	case QIXIS_SYSCLK_150:
+		return 150000000;
+	case QIXIS_SYSCLK_160:
+		return 160000000;
+	case QIXIS_SYSCLK_166:
+		return 166666666;
+	}
+	return 66666666;
+}
+
+unsigned long get_board_ddr_clk(void)
+{
+	u8 ddrclk_conf = QIXIS_READ(brdcfg[1]);
+
+	switch ((ddrclk_conf & 0x30) >> 4) {
+	case QIXIS_DDRCLK_100:
+		return 100000000;
+	case QIXIS_DDRCLK_125:
+		return 125000000;
+	case QIXIS_DDRCLK_133:
+		return 133333333;
+	}
+	return 66666666;
+}
+
+static const char *serdes_clock_to_string(u32 clock)
+{
+	switch (clock) {
+	case SRDS_PLLCR0_RFCK_SEL_100:
+		return "100";
+	case SRDS_PLLCR0_RFCK_SEL_125:
+		return "125";
+	case SRDS_PLLCR0_RFCK_SEL_156_25:
+		return "156.25";
+	case SRDS_PLLCR0_RFCK_SEL_161_13:
+		return "161.1328125";
+	default:
+		return "???";
+	}
+}
+
+int misc_init_r(void)
+{
+	u8 sw;
+	serdes_corenet_t *srds_regs =
+		(void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
+	u32 actual[MAX_SERDES];
+	unsigned int i;
+
+	sw = QIXIS_READ(brdcfg[2]);
+	for (i = 0; i < MAX_SERDES; i++) {
+		unsigned int clock = (sw >> (2 * i)) & 3;
+		switch (clock) {
+		case 0:
+			actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
+			break;
+		case 1:
+			actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
+			break;
+		case 2:
+			actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
+			break;
+		case 3:
+			actual[i] = SRDS_PLLCR0_RFCK_SEL_161_13;
+			break;
+		}
+	}
+
+	for (i = 0; i < MAX_SERDES; i++) {
+		u32 pllcr0 = srds_regs->bank[i].pllcr0;
+		u32 expected = pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
+		if (expected != actual[i]) {
+			printf("Warning: SERDES%u expects reference clock"
+			       " %sMHz, but actual is %sMHz\n", i + 1,
+			       serdes_clock_to_string(expected),
+			       serdes_clock_to_string(actual[i]));
+		}
+	}
+
+	return 0;
+}
+
+void ft_board_setup(void *blob, bd_t *bd)
+{
+	phys_addr_t base;
+	phys_size_t size;
+
+	ft_cpu_setup(blob, bd);
+
+	base = getenv_bootm_low();
+	size = getenv_bootm_size();
+
+	fdt_fixup_memory(blob, (u64)base, (u64)size);
+
+#ifdef CONFIG_PCI
+	pci_of_setup(blob, bd);
+#endif
+
+	fdt_fixup_liodn(blob);
+	fdt_fixup_dr_usb(blob, bd);
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+	fdt_fixup_fman_ethernet(blob);
+	fdt_fixup_board_enet(blob);
+#endif
+}
diff --git a/board/freescale/t4qds/t4qds.h b/board/freescale/t4qds/t4qds.h
new file mode 100644
index 0000000..c6a3492
--- /dev/null
+++ b/board/freescale/t4qds/t4qds.h
@@ -0,0 +1,37 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CORENET_DS_H__
+#define __CORENET_DS_H__
+
+void fdt_fixup_board_enet(void *blob);
+void pci_of_setup(void *blob, bd_t *bd);
+
+static const int8_t vsc3316_fsm1_tx[8][2] = { {0, 0}, {1, 1}, {6, 6}, {7, 7},
+				{8, 8}, {9, 9}, {14, 14}, {15, 15} };
+
+static const int8_t vsc3316_fsm2_tx[8][2] = { {2, 2}, {3, 3}, {4, 4}, {5, 5},
+				{10, 10}, {11, 11}, {12, 12}, {13, 13} };
+
+static const int8_t vsc3316_fsm1_rx[8][2] = { {2, 12}, {3, 13}, {4, 5}, {5, 4},
+				{10, 11}, {11, 10}, {12, 2}, {13, 3} };
+
+static const int8_t vsc3316_fsm2_rx[8][2] = { {0, 15}, {1, 14}, {6, 7}, {7, 6},
+				{8, 9}, {9, 8}, {14, 1}, {15, 0} };
+#endif
diff --git a/board/freescale/t4qds/tlb.c b/board/freescale/t4qds/tlb.c
new file mode 100644
index 0000000..078a6e4
--- /dev/null
+++ b/board/freescale/t4qds/tlb.c
@@ -0,0 +1,136 @@
+/*
+ * Copyright 2008-2012 Freescale Semiconductor, Inc.
+ *
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/mmu.h>
+
+struct fsl_e_tlb_entry tlb_table[] = {
+	/* TLB 0 - for temp stack in cache */
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 4 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 4 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 8 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 8 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+	SET_TLB_ENTRY(0, CONFIG_SYS_INIT_RAM_ADDR + 12 * 1024,
+		      CONFIG_SYS_INIT_RAM_ADDR_PHYS + 12 * 1024,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 0, BOOKE_PAGESZ_4K, 0),
+
+	/* TLB 1 */
+	/* *I*** - Covers boot page */
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L3_ADDR)
+	/*
+	 * *I*G - L3SRAM. When L3 is used as 1M SRAM, the address of the
+	 * SRAM is at 0xfff00000, it covered the 0xfffff000.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L3_ADDR, CONFIG_SYS_INIT_L3_ADDR,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 0, BOOKE_PAGESZ_1M, 1),
+#else
+	SET_TLB_ENTRY(1, 0xfffff000, 0xfffff000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 0, BOOKE_PAGESZ_4K, 1),
+#endif
+
+	/* *I*G* - CCSRBAR */
+	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 1, BOOKE_PAGESZ_16M, 1),
+
+	/* *I*G* - Flash, localbus */
+	/* This will be changed to *I*G* after relocation to RAM. */
+	SET_TLB_ENTRY(1, CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE_PHYS,
+		      MAS3_SX|MAS3_SR, MAS2_W|MAS2_G,
+		      0, 2, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT, CONFIG_SYS_PCIE1_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 3, BOOKE_PAGESZ_1G, 1),
+
+	/* *I*G* - PCI */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x40000000,
+		      CONFIG_SYS_PCIE1_MEM_PHYS + 0x40000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 4, BOOKE_PAGESZ_256M, 1),
+
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_MEM_VIRT + 0x50000000,
+		      CONFIG_SYS_PCIE1_MEM_PHYS + 0x50000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 5, BOOKE_PAGESZ_256M, 1),
+
+	/* *I*G* - PCI I/O */
+	SET_TLB_ENTRY(1, CONFIG_SYS_PCIE1_IO_VIRT, CONFIG_SYS_PCIE1_IO_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 6, BOOKE_PAGESZ_256K, 1),
+
+	/* Bman/Qman */
+#ifdef CONFIG_SYS_BMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE, CONFIG_SYS_BMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 9, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_BMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_BMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 10, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_QMAN_MEM_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE, CONFIG_SYS_QMAN_MEM_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
+		      0, 11, BOOKE_PAGESZ_16M, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_QMAN_MEM_BASE + 0x01000000,
+		      CONFIG_SYS_QMAN_MEM_PHYS + 0x01000000,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 12, BOOKE_PAGESZ_16M, 1),
+#endif
+#ifdef CONFIG_SYS_DCSRBAR_PHYS
+	SET_TLB_ENTRY(1, CONFIG_SYS_DCSRBAR, CONFIG_SYS_DCSRBAR_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 13, BOOKE_PAGESZ_4M, 1),
+#endif
+#ifdef CONFIG_SYS_NAND_BASE
+	/*
+	 * *I*G - NAND
+	 * entry 14 and 15 has been used hard coded, they will be disabled
+	 * in cpu_init_f, so we use entry 16 for nand.
+	 */
+	SET_TLB_ENTRY(1, CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 16, BOOKE_PAGESZ_1M, 1),
+#endif
+	SET_TLB_ENTRY(1, QIXIS_BASE, QIXIS_BASE_PHYS,
+		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+		      0, 17, BOOKE_PAGESZ_4K, 1),
+
+};
+
+int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/gaisler/gr_cpci_ax2000/u-boot.lds b/board/gaisler/gr_cpci_ax2000/u-boot.lds
index 87cb8e3..774c494 100644
--- a/board/gaisler/gr_cpci_ax2000/u-boot.lds
+++ b/board/gaisler/gr_cpci_ax2000/u-boot.lds
@@ -85,10 +85,11 @@
 
 	/* CMD Table */
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+
 	. = ALIGN(4);
-	__u_boot_cmd_end = .;
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	.data	:
 	{
diff --git a/board/gaisler/gr_ep2s60/u-boot.lds b/board/gaisler/gr_ep2s60/u-boot.lds
index 2fb44aa..f6d1301 100644
--- a/board/gaisler/gr_ep2s60/u-boot.lds
+++ b/board/gaisler/gr_ep2s60/u-boot.lds
@@ -85,10 +85,11 @@
 
 	/* CMD Table */
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+
 	. = ALIGN(4);
-	__u_boot_cmd_end = .;
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	.data	:
 	{
diff --git a/board/gaisler/gr_xc3s_1500/u-boot.lds b/board/gaisler/gr_xc3s_1500/u-boot.lds
index 8719e97..7df6e83 100644
--- a/board/gaisler/gr_xc3s_1500/u-boot.lds
+++ b/board/gaisler/gr_xc3s_1500/u-boot.lds
@@ -85,10 +85,11 @@
 
 	/* CMD Table */
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+
 	. = ALIGN(4);
-	__u_boot_cmd_end = .;
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	.data	:
 	{
diff --git a/board/gaisler/grsim/u-boot.lds b/board/gaisler/grsim/u-boot.lds
index 33890b5..b241cbc 100644
--- a/board/gaisler/grsim/u-boot.lds
+++ b/board/gaisler/grsim/u-boot.lds
@@ -84,10 +84,11 @@
 
 	/* CMD Table */
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+
 	. = ALIGN(4);
-	__u_boot_cmd_end = .;
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	.data	:
 	{
diff --git a/board/gaisler/grsim_leon2/u-boot.lds b/board/gaisler/grsim_leon2/u-boot.lds
index cf6e502..63c15b9 100644
--- a/board/gaisler/grsim_leon2/u-boot.lds
+++ b/board/gaisler/grsim_leon2/u-boot.lds
@@ -84,10 +84,11 @@
 
 	/* CMD Table */
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
+
 	. = ALIGN(4);
-	__u_boot_cmd_end = .;
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	.data	:
 	{
diff --git a/board/gen860t/u-boot-flashenv.lds b/board/gen860t/u-boot-flashenv.lds
index 5bb6c62..1cbe7e3 100644
--- a/board/gen860t/u-boot-flashenv.lds
+++ b/board/gen860t/u-boot-flashenv.lds
@@ -71,9 +71,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  .u_boot_list : {
+		#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/gen860t/u-boot.lds b/board/gen860t/u-boot.lds
index be99b51..dd89c70 100644
--- a/board/gen860t/u-boot.lds
+++ b/board/gen860t/u-boot.lds
@@ -71,9 +71,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/genietv/u-boot.lds b/board/genietv/u-boot.lds
index 1d66a9b..124b183 100644
--- a/board/genietv/u-boot.lds
+++ b/board/genietv/u-boot.lds
@@ -80,9 +80,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/genietv/u-boot.lds.debug b/board/genietv/u-boot.lds.debug
index cfa4ef3..e1cf249 100644
--- a/board/genietv/u-boot.lds.debug
+++ b/board/genietv/u-boot.lds.debug
@@ -107,9 +107,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/etx094/Makefile b/board/h2200/Makefile
similarity index 78%
copy from board/etx094/Makefile
copy to board/h2200/Makefile
index 6dc495c..51b1a9e 100644
--- a/board/etx094/Makefile
+++ b/board/h2200/Makefile
@@ -1,9 +1,7 @@
 #
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# h2200 Support
 #
-# See file CREDITS for list of people who contributed to this
-# project.
+# Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
 #
 # This program is free software; you can redistribute it and/or
 # modify it under the terms of the GNU General Public License as
@@ -25,11 +23,18 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	= $(BOARD).o flash.o
+COBJS	:= h2200.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+SRCS	:= $(COBJS:.o=.c) h2200-header.S
 OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+all: $(LIB) $(obj)h2200-header.bin
+
+$(obj)h2200-header.o: h2200-header.S
+	$(CC) $(CFLAGS) -c -o $@ $<
+
+$(obj)h2200-header.bin: $(obj)h2200-header.o
+	$(OBJCOPY) -O binary $< $@
 
 $(LIB):	$(obj).depend $(OBJS)
 	$(call cmd_link_o_target, $(OBJS))
diff --git a/board/h2200/h2200-header.S b/board/h2200/h2200-header.S
new file mode 100644
index 0000000..c335bfe
--- /dev/null
+++ b/board/h2200/h2200-header.S
@@ -0,0 +1,27 @@
+/*
+ * iPAQ h2200 header
+ *
+ * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+	.word 0xea0003fe /* b 0x1000 */
+
+	.org 0x40
+	.ascii "ECEC"
+
+	.org 0x1000 - 1
+	.byte 0x0
diff --git a/board/h2200/h2200.c b/board/h2200/h2200.c
new file mode 100644
index 0000000..3076306
--- /dev/null
+++ b/board/h2200/h2200.c
@@ -0,0 +1,53 @@
+/*
+ * iPAQ h2200 board configuration
+ *
+ * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#include <common.h>
+#include <asm/arch/pxa.h>
+#include <asm/arch/pxa-regs.h>
+#include <asm/io.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int board_init(void)
+{
+	/* We have RAM, disable cache */
+	dcache_disable();
+	icache_disable();
+
+	gd->bd->bi_arch_number = MACH_TYPE_H2200;
+
+	/* adress of boot parameters */
+	gd->bd->bi_boot_params = 0xa0000100;
+
+	return 0;
+}
+
+int dram_init(void)
+{
+	/*
+	 * Everything except MSC0 was already set up by
+	 * 1st stage bootloader.
+	 *
+	 * This setting enables access to companion chip.
+	 */
+	clrsetbits_le32(MSC0, 0xffffffff, CONFIG_SYS_MSC0_VAL);
+	gd->ram_size = CONFIG_SYS_SDRAM_SIZE;
+	return 0;
+}
diff --git a/board/hermes/u-boot.lds b/board/hermes/u-boot.lds
index ca97115..f02eb1c 100644
--- a/board/hermes/u-boot.lds
+++ b/board/hermes/u-boot.lds
@@ -72,9 +72,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/hermes/u-boot.lds.debug b/board/hermes/u-boot.lds.debug
index 8a197de..e84cc79 100644
--- a/board/hermes/u-boot.lds.debug
+++ b/board/hermes/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/htkw/mcx/mcx.c b/board/htkw/mcx/mcx.c
index 7c9d34a..9fe6408 100644
--- a/board/htkw/mcx/mcx.c
+++ b/board/htkw/mcx/mcx.c
@@ -27,6 +27,8 @@
 #include <asm/mach-types.h>
 #include <asm/gpio.h>
 #include <asm/omap_gpio.h>
+#include <asm/arch/dss.h>
+#include <asm/arch/clocks.h>
 #include "errno.h"
 #include <i2c.h>
 #ifdef CONFIG_USB_EHCI
@@ -37,12 +39,16 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
-#define HOT_WATER_BUTTON	38
+#define HOT_WATER_BUTTON	42
+#define LCD_OUTPUT		55
+
+/* Address of the framebuffer in RAM. */
+#define FB_START_ADDRESS 0x88000000
 
 #ifdef CONFIG_USB_EHCI
 static struct omap_usbhs_board_data usbhs_bdata = {
 	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
-	.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED,
 	.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
 };
 
@@ -67,6 +73,8 @@
 	/* boot param addr */
 	gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
 
+	gpio_direction_output(LCD_OUTPUT, 0);
+
 	return 0;
 }
 
@@ -87,6 +95,7 @@
 		return 0;
 
 	setenv("bootcmd", "run swupdate");
+
 	return 0;
 }
 #endif
@@ -109,15 +118,34 @@
 }
 #endif
 
-#ifdef CONFIG_USB_EHCI_OMAP
-#define USB_HOST_PWR_EN		132
-int board_usb_init(void)
+#if defined(CONFIG_VIDEO) && !defined(CONFIG_SPL_BUILD)
+
+static struct panel_config lcd_cfg = {
+	.timing_h       = PANEL_TIMING_H(40, 40, 48),
+	.timing_v       = PANEL_TIMING_V(29, 13, 3),
+	.pol_freq       = 0x00003000, /* Pol Freq */
+	.divisor        = 0x0001000E,
+	.panel_type     = 0x01, /* TFT */
+	.data_lines     = 0x03, /* 24 Bit RGB */
+	.load_mode      = 0x02, /* Frame Mode */
+	.panel_color	= 0,
+	.lcd_size	= PANEL_LCD_SIZE(800, 480),
+};
+
+int board_video_init(void)
 {
-	if (gpio_request(USB_HOST_PWR_EN, "USB_HOST_PWR_EN") < 0) {
-		puts("Failed to get USB_HOST_PWR_EN pin\n");
-		return -ENODEV;
-	}
-	gpio_direction_output(USB_HOST_PWR_EN, 1);
+	struct prcm *prcm_base = (struct prcm *)PRCM_BASE;
+	void *fb;
+
+	fb = (void *)FB_START_ADDRESS;
+
+	lcd_cfg.frame_buffer = fb;
+
+	setbits_le32(&prcm_base->fclken_dss, FCK_DSS_ON);
+	setbits_le32(&prcm_base->iclken_dss, ICK_DSS_ON);
+
+	omap3_dss_panel_config(&lcd_cfg);
+	omap3_dss_enable();
 
 	return 0;
 }
diff --git a/board/htkw/mcx/mcx.h b/board/htkw/mcx/mcx.h
index 867cc9e..0d4c642 100644
--- a/board/htkw/mcx/mcx.h
+++ b/board/htkw/mcx/mcx.h
@@ -96,7 +96,7 @@
 	MUX_VAL(CP(GPMC_A7),		(IEN | PTU | EN  | M4)) \
 	MUX_VAL(CP(GPMC_A8),		(IEN | PTU | EN  | M4)) \
 	MUX_VAL(CP(GPMC_A9),		(IEN | PTU | EN  | M4)) \
-	MUX_VAL(CP(GPMC_A10),		(IDIS | PTU | DIS | M4)) \
+	MUX_VAL(CP(GPMC_A10),		(IEN | PTU | EN | M4)) \
 					/* GPIO_43 LCD buffer enable */ \
 	MUX_VAL(CP(GPMC_D0),		(IEN  | PTU | EN  | M0)) \
 	MUX_VAL(CP(GPMC_D1),		(IEN  | PTU | EN  | M0)) \
@@ -143,28 +143,28 @@
 	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA0),		(IEN | PTU | EN  | M4))\
-	MUX_VAL(CP(DSS_DATA1),		(IEN | PTU | EN  | M4)) \
-	MUX_VAL(CP(DSS_DATA2),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA8),		(IEN | PTU | EN  | M4)) \
-	MUX_VAL(CP(DSS_DATA9),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0))\
-	MUX_VAL(CP(DSS_DATA16),		(IEN | PTU | EN  | M4)) \
-	MUX_VAL(CP(DSS_DATA17),		(IEN | PTU | EN  | M4)) \
-	MUX_VAL(CP(DSS_DATA18),		(IEN | PTU | EN  | M4)) \
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) \
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) \
-	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0))  \
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) \
 	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) \
 	/* CAMERA */\
@@ -264,6 +264,8 @@
 	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) \
 	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) \
 	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) \
+	MUX_VAL(CP(HDQ_SIO),		(IEN  | PTU | EN  | M4)) \
+					/* GPIO_170 Touchscreen ISR */\
 	/* McSPI */\
 	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTD | DIS | M0)) \
@@ -313,11 +315,11 @@
 	MUX_VAL(CP(RMII_TXEN),		(PTD | M0)) \
 	MUX_VAL(CP(RMII_50MHZ_CLK),	(IEN  | PTD | EN  | M0)) \
 	/* HECC */\
-	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTD | EN  | M4)) \
-	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTD | EN  | M4)) \
+	MUX_VAL(CP(HECC1_TXD),		(IEN  | PTD | EN  | M0)) \
+	MUX_VAL(CP(HECC1_RXD),		(IEN  | PTD | EN  | M0)) \
 	/* HSUSB */\
 	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) \
-	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) \
+	MUX_VAL(CP(HSUSB0_STP),		(IEN  | PTU | DIS  | M0)) \
 	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)) \
 	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) \
diff --git a/board/hymod/u-boot.lds b/board/hymod/u-boot.lds
index 1309f20..7afae0a 100644
--- a/board/hymod/u-boot.lds
+++ b/board/hymod/u-boot.lds
@@ -110,9 +110,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/hymod/u-boot.lds.debug b/board/hymod/u-boot.lds.debug
index 99c48f2..dc8c4e9 100644
--- a/board/hymod/u-boot.lds.debug
+++ b/board/hymod/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/icu862/u-boot.lds b/board/icu862/u-boot.lds
index 93c79a6..6778eb1 100644
--- a/board/icu862/u-boot.lds
+++ b/board/icu862/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/icu862/u-boot.lds.debug b/board/icu862/u-boot.lds.debug
index 91d3e67..3e075a8 100644
--- a/board/icu862/u-boot.lds.debug
+++ b/board/icu862/u-boot.lds.debug
@@ -107,9 +107,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/idmr/u-boot.lds b/board/idmr/u-boot.lds
index f697ccd..0d6a0f3 100644
--- a/board/idmr/u-boot.lds
+++ b/board/idmr/u-boot.lds
@@ -65,9 +65,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/incaip/u-boot.lds b/board/incaip/u-boot.lds
index 4a59cea..8a871cf 100644
--- a/board/incaip/u-boot.lds
+++ b/board/incaip/u-boot.lds
@@ -54,10 +54,9 @@
 
 	.sdata  : { *(.sdata*) }
 
-	.u_boot_cmd : {
-	  __u_boot_cmd_start = .;
-	  *(.u_boot_cmd)
-	  __u_boot_cmd_end = .;
+	. = ALIGN(4);
+	.u_boot_list : {
+		#include <u-boot.lst>
 	}
 
 	uboot_end_data = .;
diff --git a/board/ip860/u-boot.lds b/board/ip860/u-boot.lds
index d0b60cf..18f962c 100644
--- a/board/ip860/u-boot.lds
+++ b/board/ip860/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/ip860/u-boot.lds.debug b/board/ip860/u-boot.lds.debug
index 2f61b11..e47aff0 100644
--- a/board/ip860/u-boot.lds.debug
+++ b/board/ip860/u-boot.lds.debug
@@ -107,9 +107,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/ivm/ivm.c b/board/ivm/ivm.c
index 71d64d4..ab29479 100644
--- a/board/ivm/ivm.c
+++ b/board/ivm/ivm.c
@@ -333,13 +333,59 @@
 void ide_set_reset (int on)
 {
 	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
+	int i;
 
 	/*
 	 * Configure PC for IDE Reset Pin
 	 */
 	if (on) {		/* assert RESET */
 		immr->im_ioport.iop_pcdat &= ~(CONFIG_SYS_PC_IDE_RESET);
+
+#ifdef CONFIG_SYS_PB_12V_ENABLE
+		/* 12V Enable output OFF */
+		immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE);
+
+		immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE);
+		immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE);
+		immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_12V_ENABLE;
+
+		/* wait 500 ms for the voltage to stabilize */
+		for (i = 0; i < 500; ++i)
+			udelay(1000);
+#endif /* CONFIG_SYS_PB_12V_ENABLE */
 	} else {		/* release RESET */
+#ifdef CONFIG_SYS_PB_12V_ENABLE
+		/* 12V Enable output ON */
+		immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_12V_ENABLE;
+#endif /* CONFIG_SYS_PB_12V_ENABLE */
+
+#ifdef CONFIG_SYS_PB_IDE_MOTOR
+		/* configure IDE Motor voltage monitor pin as input */
+		immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+		immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+		immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR);
+
+/* wait up to 1 s for the motor voltage to stabilize */
+		for (i = 0; i < 1000; ++i) {
+			if ((immr->im_cpm.cp_pbdat
+					& CONFIG_SYS_PB_IDE_MOTOR) != 0)
+				break;
+			udelay(1000);
+		}
+
+		if (i == 1000) {	/* Timeout */
+			printf("\nWarning: 5V for IDE Motor missing\n");
+#ifdef CONFIG_STATUS_LED
+#ifdef STATUS_LED_YELLOW
+			status_led_set(STATUS_LED_YELLOW, STATUS_LED_ON);
+#endif
+#ifdef STATUS_LED_GREEN
+			status_led_set(STATUS_LED_GREEN, STATUS_LED_OFF);
+#endif
+#endif /* CONFIG_STATUS_LED */
+		}
+#endif /* CONFIG_SYS_PB_IDE_MOTOR */
+
 		immr->im_ioport.iop_pcdat |= CONFIG_SYS_PC_IDE_RESET;
 	}
 
diff --git a/board/ivm/u-boot.lds b/board/ivm/u-boot.lds
index 1e843eb..4cca652 100644
--- a/board/ivm/u-boot.lds
+++ b/board/ivm/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/ivm/u-boot.lds.debug b/board/ivm/u-boot.lds.debug
index 732a46f..53a19b2 100644
--- a/board/ivm/u-boot.lds.debug
+++ b/board/ivm/u-boot.lds.debug
@@ -107,9 +107,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c
index e01a633..83a8753 100644
--- a/board/keymile/km83xx/km83xx.c
+++ b/board/keymile/km83xx/km83xx.c
@@ -56,7 +56,7 @@
 	{5,  2, 1, 0, 1}, /* UART2_RTS */
 	{5,  3, 2, 0, 2}, /* UART2_SIN */
 	{5,  1, 2, 0, 3}, /* UART2_CTS */
-#else
+#elif !defined(CONFIG_MPC8309)
 	/* Local Bus */
 	{0, 16, 1, 0, 3}, /* LA00 */
 	{0, 17, 1, 0, 3}, /* LA01 */
diff --git a/board/kmc/kzm9g/kzm9g.c b/board/kmc/kzm9g/kzm9g.c
index 525c97a..54f25e0 100644
--- a/board/kmc/kzm9g/kzm9g.c
+++ b/board/kmc/kzm9g/kzm9g.c
@@ -43,6 +43,7 @@
 #define SMSTPCR1_CMT0	(1 << 24)
 #define SMSTPCR1_I2C0	(1 << 16)
 #define SMSTPCR3_USB	(1 << 22)
+#define SMSTPCR3_I2C1	(1 << 23)
 
 #define PORT32CR (0xE6051020)
 #define PORT33CR (0xE6051021)
@@ -287,8 +288,8 @@
 
 	clrbits_le32(&cpg->smstpcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0));
 	clrbits_le32(&cpg_srcr->srcr1, (SMSTPCR1_CMT0|SMSTPCR1_I2C0));
-	clrbits_le32(&cpg->smstpcr3, SMSTPCR3_USB);
-	clrbits_le32(&cpg_srcr->srcr3, SMSTPCR3_USB);
+	clrbits_le32(&cpg->smstpcr3, (SMSTPCR3_USB|SMSTPCR3_I2C1));
+	clrbits_le32(&cpg_srcr->srcr3, (SMSTPCR3_USB|SMSTPCR3_I2C1));
 	writel(VCLKCR1_D, &cpg->vclkcr1);
 
 	/* Setup SCIF4 / workaround */
@@ -343,6 +344,8 @@
 	gpio_direction_output(GPIO_PORT15, 1);
 
 	/* I2C */
+	gpio_request(GPIO_FN_PORT237_I2C_SCL2, NULL);
+	gpio_request(GPIO_FN_PORT236_I2C_SDA2, NULL);
 	gpio_request(GPIO_FN_PORT27_I2C_SCL3, NULL);
 	gpio_request(GPIO_FN_PORT28_I2C_SDA3, NULL);
 
diff --git a/board/korat/u-boot-F7FC.lds b/board/korat/u-boot-F7FC.lds
index 6a017e3..033cff4 100644
--- a/board/korat/u-boot-F7FC.lds
+++ b/board/korat/u-boot-F7FC.lds
@@ -108,10 +108,10 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/kup/kup4k/u-boot.lds b/board/kup/kup4k/u-boot.lds
index d0b60cf..18f962c 100644
--- a/board/kup/kup4k/u-boot.lds
+++ b/board/kup/kup4k/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/kup/kup4k/u-boot.lds.debug b/board/kup/kup4k/u-boot.lds.debug
index 4491edd..b43a1e4 100644
--- a/board/kup/kup4k/u-boot.lds.debug
+++ b/board/kup/kup4k/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/kup/kup4x/u-boot.lds b/board/kup/kup4x/u-boot.lds
index d0b60cf..18f962c 100644
--- a/board/kup/kup4x/u-boot.lds
+++ b/board/kup/kup4x/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/kup/kup4x/u-boot.lds.debug b/board/kup/kup4x/u-boot.lds.debug
index 4491edd..b43a1e4 100644
--- a/board/kup/kup4x/u-boot.lds.debug
+++ b/board/kup/kup4x/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/lantec/Makefile b/board/lantec/Makefile
deleted file mode 100644
index 12e4aa6..0000000
--- a/board/lantec/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o flash.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/lantec/flash.c b/board/lantec/flash.c
deleted file mode 100644
index 97ed054..0000000
--- a/board/lantec/flash.c
+++ /dev/null
@@ -1,625 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Derived from ../tqm8xx/flash.c
- * [Torsten Stevens, FHG IMS; Bruno Achauer, Exet AG]
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef  CONFIG_ENV_ADDR
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef  CONFIG_ENV_SECT_SIZE
-#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size_b0, size_b1;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0: "
-			"ID 0x%lx, Size = 0x%08lx = %ld MB\n",
-			flash_info[0].flash_id,
-			size_b0, size_b0<<20);
-	}
-
-	DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE5_PRELIM);
-
-	size_b1 = flash_get_size((vu_long *)FLASH_BASE5_PRELIM, &flash_info[1]);
-
-	DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
-	if (size_b1 > size_b0) {
-		printf ("## ERROR: "
-			"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
-			size_b1, size_b1<<20,
-			size_b0, size_b0<<20
-		);
-		flash_info[0].flash_id	= FLASH_UNKNOWN;
-		flash_info[1].flash_id	= FLASH_UNKNOWN;
-		flash_info[0].sector_count	= -1;
-		flash_info[1].sector_count	= -1;
-		flash_info[0].size		= 0;
-		flash_info[1].size		= 0;
-		return (0);
-	}
-
-	DEBUGF ("## Before remap: "
-		"BR0: 0x%08x    OR0: 0x%08x    "
-		"BR1: 0x%08x    OR1: 0x%08x\n",
-		memctl->memc_br0, memctl->memc_or0,
-		memctl->memc_br1, memctl->memc_or1);
-
-	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & 0xFFFF8000);
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | \
-				BR_MS_GPCM | BR_PS_32 | BR_V;
-
-	DEBUGF("## BR0: 0x%08x    OR0: 0x%08x\n",
-		memctl->memc_br0, memctl->memc_or0);
-
-	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_info[0].size = size_b0;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-		      &flash_info[0]);
-#endif
-
-	if (size_b1) {
-		memctl->memc_or5 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
-		memctl->memc_br5 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
-				    BR_MS_GPCM | BR_PS_32 | BR_V;
-
-		DEBUGF("## BR5: 0x%08x    OR5: 0x%08x\n",
-			memctl->memc_br5, memctl->memc_or5);
-
-		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
-					  &flash_info[1]);
-
-		flash_info[1].size = size_b1;
-
-		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-		/* monitor protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_SYS_MONITOR_BASE,
-			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-			      &flash_info[1]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-		/* ENV protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_ENV_ADDR,
-			      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-			      &flash_info[1]);
-#endif
-	} else {
-		memctl->memc_br5 = 0;		/* invalidate bank */
-		memctl->memc_or5 = 0;		/* invalidate bank */
-
-		DEBUGF("## DISABLE BR5: 0x%08x    OR5: 0x%08x\n",
-			memctl->memc_br5, memctl->memc_or5);
-
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-		flash_info[1].size = 0;
-	}
-
-	DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
-	return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-	}
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00900090;
-
-	value = addr[0];
-
-	switch (value) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[1];			/* device ID		*/
-
-	switch (value) {
-	case AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-
-	case AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-#if 0	/* enable when device IDs are available */
-	case AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-
-	case AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-#endif
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr = (volatile unsigned long *)(info->start[i]);
-		info->protect[i] = addr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile unsigned long *)info->start[0];
-
-		*addr = 0x00F000F0;	/* reset bank */
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00800080;
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long*)(info->start[sect]);
-			addr[0] = 0x00300030;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long*)(info->start[l_sect]);
-	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (volatile unsigned long *)info->start[0];
-	addr[0] = 0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00A000A0;
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/lantec/lantec.c b/board/lantec/lantec.c
deleted file mode 100644
index 6d3486c..0000000
--- a/board/lantec/lantec.c
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2001
- * Torsten Stevens, FHG IMS, stevens@ims.fhg.de
- * Bruno Achauer, Exet AG, bruno@exet-ag.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Derived from ../tqm8xx/tqm8xx.c
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
-	0x1ff77c47,		/* last */
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-	0x1ff77c35, 0xefeabc34, 0x1fb57c35,	/* last */
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 */
-	0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
-	0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,	/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 */
-	0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
-	0xf0affc00, 0xe1bbbc04, 0x1ff77c47,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 */
-	0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
-	0xfffffc84, 0xfffffc07, 0xfffffc07,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0x7ffffc07,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-/*
- * Check Board Identity:
- *
- * Test TQ ID string (TQM8xx...)
- * If present, check for "L" type (no second DRAM bank),
- * otherwise "L" type is assumed as default.
- *
- * Return 1 for "L" type, 0 else.
- */
-
-int checkboard (void)
-{
-	printf ("Board: Lantec special edition rev.%d\n", CONFIG_LANTEC);
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	long int size_b0;
-	int i;
-
-	/*
-	 * Configure UPMA for SDRAM
-	 */
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_8K /* XXX CONFIG_SYS_MPTPR XXX */ ;
-
-	/* burst length=4, burst type=sequential, CAS latency=2 */
-	memctl->memc_mar = 0x00000088;
-
-	/*
-	 * Map controller bank 3 to the SDRAM bank at preliminary address.
-	 */
-	memctl->memc_or3 = CONFIG_SYS_OR3_PRELIM;
-	memctl->memc_br3 = CONFIG_SYS_BR3_PRELIM;
-
-	/* initialize memory address register */
-	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;	/* refresh not enabled yet */
-
-	/* mode initialization (offset 5) */
-	udelay (200);		/* 0x80006105 */
-	memctl->memc_mcr =
-		MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x05);
-
-	/* run 2 refresh sequence with 4-beat refresh burst (offset 0x30) */
-	udelay (1);		/* 0x80006130 */
-	memctl->memc_mcr =
-		MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
-	udelay (1);		/* 0x80006130 */
-	memctl->memc_mcr =
-		MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x30);
-
-	udelay (1);		/* 0x80006106 */
-	memctl->memc_mcr =
-		MCR_OP_RUN | MCR_MB_CS3 | MCR_MLCF (1) | MCR_MAD (0x06);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* refresh enabled */
-
-	udelay (200);
-
-	/* Need at least 10 DRAM accesses to stabilize */
-	for (i = 0; i < 10; ++i) {
-		volatile unsigned long *addr =
-			(volatile unsigned long *) SDRAM_BASE3_PRELIM;
-		unsigned long val;
-
-		val = *(addr + i);
-		*(addr + i) = val;
-	}
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 */
-	size_b0 = dram_size (CONFIG_SYS_MAMR_8COL,
-			     (long *) SDRAM_BASE3_PRELIM, SDRAM_MAX_SIZE);
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR_8COL | MAMR_PTAE;
-
-	/*
-	 * Final mapping:
-	 */
-
-	memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
-	memctl->memc_br3 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
-	udelay (1000);
-
-	return (size_b0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size (base, maxsize));
-}
diff --git a/board/lantec/u-boot.lds b/board/lantec/u-boot.lds
deleted file mode 100644
index de0b355..0000000
--- a/board/lantec/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-    net/libnet.o			(.text*)
-    arch/powerpc/lib/libpowerpc.o	(.text*)
-    drivers/rtc/librtc.o		(.text*)
-
-    . = env_offset;
-    common/env_embedded.o		(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end__ = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/lantec/u-boot.lds.debug b/board/lantec/u-boot.lds.debug
deleted file mode 100644
index 856a99b..0000000
--- a/board/lantec/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end__ = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/linkstation/ide.c b/board/linkstation/ide.c
index f3e3fce..541c958 100644
--- a/board/linkstation/ide.c
+++ b/board/linkstation/ide.c
@@ -37,7 +37,6 @@
 #define IT8212_PCI_IdeBusSkewCONTROL	0x4c
 #define IT8212_PCI_IdeDrivingCURRENT	0x42
 
-extern ulong ide_bus_offset[CONFIG_SYS_IDE_MAXBUS];
 extern struct pci_controller hose;
 
 int ide_preinit (void)
diff --git a/board/lubbock/lubbock.c b/board/lubbock/lubbock.c
index 3527b38..ef2cc24 100644
--- a/board/lubbock/lubbock.c
+++ b/board/lubbock/lubbock.c
@@ -29,6 +29,7 @@
 #include <netdev.h>
 #include <asm/arch/pxa.h>
 #include <asm/arch/pxa-regs.h>
+#include <asm/arch/regs-mmc.h>
 #include <asm/io.h>
 
 DECLARE_GLOBAL_DATA_PTR;
@@ -56,6 +57,14 @@
 	return 0;
 }
 
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+	pxa_mmc_register(0);
+	return 0;
+}
+#endif
+
 int board_late_init(void)
 {
 	setenv("stdout", "serial");
diff --git a/board/lwmon/u-boot.lds b/board/lwmon/u-boot.lds
index 8bf7324..bc71b0d 100644
--- a/board/lwmon/u-boot.lds
+++ b/board/lwmon/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/lwmon/u-boot.lds.debug b/board/lwmon/u-boot.lds.debug
index 2412234..0a3e646 100644
--- a/board/lwmon/u-boot.lds.debug
+++ b/board/lwmon/u-boot.lds.debug
@@ -107,9 +107,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/manroland/uc100/u-boot.lds b/board/manroland/uc100/u-boot.lds
index 731cec9..e32ae37 100644
--- a/board/manroland/uc100/u-boot.lds
+++ b/board/manroland/uc100/u-boot.lds
@@ -69,9 +69,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/matrix_vision/mvsmr/u-boot.lds b/board/matrix_vision/mvsmr/u-boot.lds
index 57c37de..5a3a9ea 100644
--- a/board/matrix_vision/mvsmr/u-boot.lds
+++ b/board/matrix_vision/mvsmr/u-boot.lds
@@ -74,9 +74,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/mbx8xx/u-boot.lds b/board/mbx8xx/u-boot.lds
index d0b60cf..18f962c 100644
--- a/board/mbx8xx/u-boot.lds
+++ b/board/mbx8xx/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/mbx8xx/u-boot.lds.debug b/board/mbx8xx/u-boot.lds.debug
index a95c47f..4155b60 100644
--- a/board/mbx8xx/u-boot.lds.debug
+++ b/board/mbx8xx/u-boot.lds.debug
@@ -107,9 +107,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/micronas/vct/u-boot.lds b/board/micronas/vct/u-boot.lds
index 3a05ef9..2ce8d0e 100644
--- a/board/micronas/vct/u-boot.lds
+++ b/board/micronas/vct/u-boot.lds
@@ -53,10 +53,8 @@
 	.sdata  : { *(.sdata*) }
 
 	. = ALIGN(4);
-	.u_boot_cmd : {
-	  __u_boot_cmd_start = .;
-	  *(.u_boot_cmd)
-	  __u_boot_cmd_end = .;
+	.u_boot_list : {
+		#include <u-boot.lst>
 	}
 
 	. = ALIGN(4);
diff --git a/board/mousse/u-boot.lds b/board/mousse/u-boot.lds
index dae2cfc..43f91f1 100644
--- a/board/mousse/u-boot.lds
+++ b/board/mousse/u-boot.lds
@@ -60,9 +60,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/mousse/u-boot.lds.ram b/board/mousse/u-boot.lds.ram
index b3364be..5255651 100644
--- a/board/mousse/u-boot.lds.ram
+++ b/board/mousse/u-boot.lds.ram
@@ -85,9 +85,6 @@
   } > ram
   */
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
    __start___ex_table = .;
     __ex_table : { *(__ex_table) } > ram
diff --git a/board/mousse/u-boot.lds.rom b/board/mousse/u-boot.lds.rom
index b4b9e02..29a34fb 100644
--- a/board/mousse/u-boot.lds.rom
+++ b/board/mousse/u-boot.lds.rom
@@ -102,9 +102,6 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
 
   __start___ex_table = .;
   __ex_table : { *(__ex_table) }
diff --git a/board/mpl/pip405/u-boot.lds.debug b/board/mpl/pip405/u-boot.lds.debug
index fcf8ebb..d7a2e56 100644
--- a/board/mpl/pip405/u-boot.lds.debug
+++ b/board/mpl/pip405/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/mvblue/u-boot.lds b/board/mvblue/u-boot.lds
index 11624d2..c378564 100644
--- a/board/mvblue/u-boot.lds
+++ b/board/mvblue/u-boot.lds
@@ -70,9 +70,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/netphone/u-boot.lds b/board/netphone/u-boot.lds
index a949e4f..cdc1fda 100644
--- a/board/netphone/u-boot.lds
+++ b/board/netphone/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/netphone/u-boot.lds.debug b/board/netphone/u-boot.lds.debug
index a001f3f..900da64 100644
--- a/board/netphone/u-boot.lds.debug
+++ b/board/netphone/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/netta/u-boot.lds b/board/netta/u-boot.lds
index a949e4f..cdc1fda 100644
--- a/board/netta/u-boot.lds
+++ b/board/netta/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/netta/u-boot.lds.debug b/board/netta/u-boot.lds.debug
index a001f3f..900da64 100644
--- a/board/netta/u-boot.lds.debug
+++ b/board/netta/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/netta2/u-boot.lds b/board/netta2/u-boot.lds
index a949e4f..cdc1fda 100644
--- a/board/netta2/u-boot.lds
+++ b/board/netta2/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/netta2/u-boot.lds.debug b/board/netta2/u-boot.lds.debug
index a001f3f..900da64 100644
--- a/board/netta2/u-boot.lds.debug
+++ b/board/netta2/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/netvia/u-boot.lds b/board/netvia/u-boot.lds
index a949e4f..cdc1fda 100644
--- a/board/netvia/u-boot.lds
+++ b/board/netvia/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/netvia/u-boot.lds.debug b/board/netvia/u-boot.lds.debug
index 6c7d698..6cbf4dc 100644
--- a/board/netvia/u-boot.lds.debug
+++ b/board/netvia/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/etx094/Makefile b/board/nokia/rx51/Makefile
similarity index 82%
copy from board/etx094/Makefile
copy to board/nokia/rx51/Makefile
index 6dc495c..86fb48c 100644
--- a/board/etx094/Makefile
+++ b/board/nokia/rx51/Makefile
@@ -1,5 +1,5 @@
 #
-# (C) Copyright 2000-2006
+# (C) Copyright 2000, 2001, 2002
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 #
 # See file CREDITS for list of people who contributed to this
@@ -25,11 +25,13 @@
 
 LIB	= $(obj)lib$(BOARD).o
 
-COBJS	= $(BOARD).o flash.o
+COBJS-y	:= $(BOARD).o
+SOBJS-y := lowlevel_init.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
+COBJS	:= $(sort $(COBJS-y))
+SOBJS	:= $(sort $(SOBJS-y))
+SRCS	:= $(COBJS:.o=.c) $(SOBJS:.o=.S)
+OBJS	:= $(addprefix $(obj),$(COBJS)) $(addprefix $(obj),$(SOBJS))
 
 $(LIB):	$(obj).depend $(OBJS)
 	$(call cmd_link_o_target, $(OBJS))
diff --git a/board/nokia/rx51/lowlevel_init.S b/board/nokia/rx51/lowlevel_init.S
new file mode 100644
index 0000000..055b103
--- /dev/null
+++ b/board/nokia/rx51/lowlevel_init.S
@@ -0,0 +1,209 @@
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+relocaddr:		/* address of this relocaddr section after coping */
+	.word .		/* address of section (calculated at compile time) */
+
+startaddr:		/* address of u-boot after copying */
+	.word CONFIG_SYS_TEXT_BASE
+
+kernaddr:		/* address of kernel after copying */
+	.word KERNEL_ADDRESS
+
+kernsize:		/* maximal size of kernel image */
+	.word KERNEL_MAXSIZE
+
+kernoffs:		/* offset of kernel image in loaded u-boot */
+	.word KERNEL_OFFSET
+
+imagesize:		/* maximal size of image */
+	.word IMAGE_MAXSIZE
+
+ih_magic:		/* IH_MAGIC in big endian from include/image.h */
+	.word 0x56190527
+
+/*
+ * Routine: save_boot_params (called after reset from start.S)
+ * Description: Copy attached kernel to address KERNEL_ADDRESS
+ *              Copy u-boot to address CONFIG_SYS_TEXT_BASE
+ *              Return to copied u-boot address
+ */
+
+.global save_boot_params
+save_boot_params:
+
+
+/* Copy valid attached kernel to address KERNEL_ADDRESS */
+
+copy_kernel_start:
+	adr	r0, relocaddr	/* r0 - address of section relocaddr */
+	ldr	r1, relocaddr	/* r1 - address of relocaddr after relocation */
+	cmp	r0, r1
+
+	/* r4 - calculated offset */
+	subhi	r4, r0, r1
+	sublo	r4, r1, r0
+
+	/* r0 - start of kernel before */
+	ldr	r0, startaddr
+	addhi	r0, r0, r4
+	sublo	r0, r0, r4
+	ldr	r1, kernoffs
+	add	r0, r0, r1
+
+	/* r3 - start of kernel after */
+	ldr	r3, kernaddr
+
+	/* r2 - end of kernel after */
+	ldr	r1, kernsize
+	add	r2, r3, r1
+
+	/* r1 - end of kernel before */
+	add	r1, r0, r1
+
+	/* remove header in target kernel */
+	mov	r5, #0
+	str	r5, [r3]
+
+	/* check for valid kernel uImage */
+	ldr	r4, [r0]	/* r4 - 4 bytes header of kernel */
+	ldr	r5, ih_magic	/* r5 - IH_MAGIC */
+	cmp	r4, r5
+	bne	copy_kernel_end	/* skip if invalid image */
+
+copy_kernel_loop:
+	ldmdb	r1!, {r3 - r10}
+	stmdb	r2!, {r3 - r10}
+	cmp	r1, r0
+	bhi	copy_kernel_loop
+
+copy_kernel_end:
+	mov	r5, #0
+	str	r5, [r0]	/* remove 4 bytes header of kernel */
+
+
+/* Fix u-boot code */
+
+fix_start:
+	adr	r0, relocaddr	/* r0 - address of section relocaddr */
+	ldr	r1, relocaddr	/* r1 - address of relocaddr after relocation */
+	cmp	r0, r1
+
+	beq	copy_uboot_end	/* skip if u-boot is on correct address */
+
+	/* r5 - calculated offset */
+	subhi	r5, r0, r1
+	sublo	r5, r1, r0
+
+	/* r6 - maximal u-boot size */
+	ldr	r6, imagesize
+
+	/* fix return address */
+	subhi	lr, lr, r5
+	addlo	lr, lr, r5
+
+	/* r1 - start of u-boot after */
+	ldr	r1, startaddr
+
+	/* r0 - start of u-boot before */
+	addhi	r0, r1, r5
+	sublo	r0, r1, r5
+
+	/* check if we need to move uboot copy code before calling it */
+	cmp	r5, r6
+	bhi	copy_uboot_start /* now coping u-boot code directly is safe */
+
+
+copy_code_start:
+	/* r0 - start of u-boot before */
+	/* r1 - start of u-boot after */
+	/* r6 - maximal u-boot size */
+
+	/* r7 - maximal kernel size */
+	ldr	r7, kernsize
+
+	/* r4 - end of kernel before */
+	add	r4, r0, r6
+	add	r4, r4, r7
+
+	/* r5 - end of u-boot after */
+	ldr	r5, startaddr
+	add	r5, r5, r6
+
+	/* r2 - start of loop code after */
+	cmp	r4, r5		/* higher address (r4 or r5) */
+	movhs	r2, r4
+	movlo	r2, r5
+
+	/* r3 - end of loop code before */
+	adr	r3, end
+
+	/* r4 - end of loop code after */
+	adr	r4, copy_uboot_start
+	sub	r4, r3, r4
+	add	r4, r2, r4
+
+copy_code_loop:
+	ldmdb	r3!, {r7 - r10}
+	stmdb	r4!, {r7 - r10}
+	cmp	r4, r2
+	bhi	copy_code_loop
+
+copy_code_end:
+	mov	pc, r2
+
+
+/* Copy u-boot to address CONFIG_SYS_TEXT_BASE */
+
+copy_uboot_start:
+	/* r0 - start of u-boot before */
+	/* r1 - start of u-boot after */
+	/* r6 - maximal u-boot size */
+
+	/* r2 - end of u-boot after */
+	add	r2, r1, r6
+
+	/* condition for copying from left to right */
+	cmp	r0, r1
+	addlo	r1, r0, r6	/* r1 - end of u-boot before */
+	blo	copy_uboot_loop_right
+
+copy_uboot_loop_left:
+	ldmia	r0!, {r3 - r10}
+	stmia	r1!, {r3 - r10}
+	cmp	r1, r2
+	blo	copy_uboot_loop_left
+	b	copy_uboot_end
+
+copy_uboot_loop_right:
+	ldmdb	r1!, {r3 - r10}
+	stmdb	r2!, {r3 - r10}
+	cmp	r1, r0
+	bhi	copy_uboot_loop_right
+
+copy_uboot_end:
+	bx	lr
+
+end:
diff --git a/board/nokia/rx51/rx51.c b/board/nokia/rx51/rx51.c
new file mode 100644
index 0000000..b2fe1c5
--- /dev/null
+++ b/board/nokia/rx51/rx51.c
@@ -0,0 +1,677 @@
+/*
+ * (C) Copyright 2012
+ * Ивайло Димитров <freemangordon@abv.bg>
+ *
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2010
+ * Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * Derived from Beagle Board and 3430 SDP code:
+ * (C) Copyright 2004-2008
+ * Texas Instruments, <www.ti.com>
+ *
+ * Author :
+ *	Sunil Kumar <sunilsaini05@gmail.com>
+ *	Shashi Ranjan <shashiranjanmca05@gmail.com>
+ *
+ *	Richard Woodruff <r-woodruff2@ti.com>
+ *	Syed Mohammed Khasim <khasim@ti.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <malloc.h>
+#include <twl4030.h>
+#include <i2c.h>
+#include <video_fb.h>
+#include <asm/io.h>
+#include <asm/setup.h>
+#include <asm/bitops.h>
+#include <asm/mach-types.h>
+#include <asm/arch/mux.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mmc_host_def.h>
+
+#include "rx51.h"
+#include "tag_omap.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+GraphicDevice gdev;
+
+const omap3_sysinfo sysinfo = {
+	DDR_STACKED,
+	"Nokia RX-51",
+	"OneNAND"
+};
+
+/* This structure contains default omap tags needed for booting Maemo 5 */
+static struct tag_omap omap[] = {
+	OMAP_TAG_UART_CONFIG(0x04),
+	OMAP_TAG_SERIAL_CONSOLE_CONFIG(0x03, 0x01C200),
+	OMAP_TAG_LCD_CONFIG("acx565akm", "internal", 90, 0x18),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cam_focus", 0x44, 0x1, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cam_launch", 0x45, 0x1, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cam_shutter", 0x6e, 0x1, 0x0, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_apeslpx", 0x46, 0x2, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_bsi", 0x9d, 0x2, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_en", 0x4a, 0x2, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst", 0x4b, 0x6, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_rst_rq", 0x49, 0x6, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("cmt_wddis", 0x0d, 0x2, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("headphone", 0xb1, 0x1, 0x1, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("kb_lock", 0x71, 0x1, 0x0, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("proximity", 0x59, 0x0, 0x0, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("sleep_ind", 0xa2, 0x2, 0x2, 0x0),
+	OMAP_TAG_GPIO_SWITCH_CONFIG("slide", GPIO_SLIDE, 0x0, 0x0, 0x0),
+	OMAP_TAG_WLAN_CX3110X_CONFIG(0x25, 0xff, 87, 42, -1),
+	OMAP_TAG_PARTITION_CONFIG(PART1_NAME, PART1_SIZE * PART1_MULL,
+			PART1_OFFS, PART1_MASK),
+	OMAP_TAG_PARTITION_CONFIG(PART2_NAME, PART2_SIZE * PART2_MULL,
+			PART2_OFFS, PART2_MASK),
+	OMAP_TAG_PARTITION_CONFIG(PART3_NAME, PART3_SIZE * PART3_MULL,
+			PART3_OFFS, PART3_MASK),
+	OMAP_TAG_PARTITION_CONFIG(PART4_NAME, PART4_SIZE * PART4_MULL,
+			PART4_OFFS, PART4_MASK),
+	OMAP_TAG_PARTITION_CONFIG(PART5_NAME, PART5_SIZE * PART5_MULL,
+			PART5_OFFS, PART5_MASK),
+	OMAP_TAG_PARTITION_CONFIG(PART6_NAME, PART6_SIZE * PART6_MULL,
+			PART6_OFFS, PART6_MASK),
+	OMAP_TAG_BOOT_REASON_CONFIG("pwr_key"),
+	OMAP_TAG_VERSION_STR_CONFIG("product", "RX-51"),
+	OMAP_TAG_VERSION_STR_CONFIG("hw-build", "2101"),
+	OMAP_TAG_VERSION_STR_CONFIG("nolo", "1.4.14"),
+	OMAP_TAG_VERSION_STR_CONFIG("boot-mode", "normal"),
+	{ }
+};
+
+static char *boot_reason_ptr;
+static char *hw_build_ptr;
+static char *nolo_version_ptr;
+static char *boot_mode_ptr;
+
+/*
+ * Routine: init_omap_tags
+ * Description: Initialize pointers to values in tag_omap
+ */
+static void init_omap_tags(void)
+{
+	char *component;
+	char *version;
+	int i = 0;
+	while (omap[i].hdr.tag) {
+		switch (omap[i].hdr.tag) {
+		case OMAP_TAG_BOOT_REASON:
+			boot_reason_ptr = omap[i].u.boot_reason.reason_str;
+			break;
+		case OMAP_TAG_VERSION_STR:
+			component = omap[i].u.version.component;
+			version = omap[i].u.version.version;
+			if (strcmp(component, "hw-build") == 0)
+				hw_build_ptr = version;
+			else if (strcmp(component, "nolo") == 0)
+				nolo_version_ptr = version;
+			else if (strcmp(component, "boot-mode") == 0)
+				boot_mode_ptr = version;
+			break;
+		default:
+			break;
+		}
+		i++;
+	}
+}
+
+static void reuse_omap_atags(struct tag_omap *t)
+{
+	char *component;
+	char *version;
+	while (t->hdr.tag) {
+		switch (t->hdr.tag) {
+		case OMAP_TAG_BOOT_REASON:
+			memset(boot_reason_ptr, 0, 12);
+			strcpy(boot_reason_ptr, t->u.boot_reason.reason_str);
+			break;
+		case OMAP_TAG_VERSION_STR:
+			component = t->u.version.component;
+			version = t->u.version.version;
+			if (strcmp(component, "hw-build") == 0) {
+				memset(hw_build_ptr, 0, 12);
+				strcpy(hw_build_ptr, version);
+			} else if (strcmp(component, "nolo") == 0) {
+				memset(nolo_version_ptr, 0, 12);
+				strcpy(nolo_version_ptr, version);
+			} else if (strcmp(component, "boot-mode") == 0) {
+				memset(boot_mode_ptr, 0, 12);
+				strcpy(boot_mode_ptr, version);
+			}
+			break;
+		default:
+			break;
+		}
+		t = tag_omap_next(t);
+	}
+}
+
+/*
+ * Routine: reuse_atags
+ * Description: Reuse atags from previous bootloader.
+ *              Reuse only only HW build, boot reason, boot mode and nolo
+ */
+static void reuse_atags(void)
+{
+	struct tag *t = (struct tag *)gd->bd->bi_boot_params;
+
+	/* First tag must be ATAG_CORE */
+	if (t->hdr.tag != ATAG_CORE)
+		return;
+
+	if (!boot_reason_ptr || !hw_build_ptr)
+		return;
+
+	/* Last tag must be ATAG_NONE */
+	while (t->hdr.tag != ATAG_NONE) {
+		switch (t->hdr.tag) {
+		case ATAG_REVISION:
+			memset(hw_build_ptr, 0, 12);
+			sprintf(hw_build_ptr, "%x", t->u.revision.rev);
+			break;
+		case ATAG_BOARD:
+			reuse_omap_atags((struct tag_omap *)&t->u);
+			break;
+		default:
+			break;
+		}
+		t = tag_next(t);
+	}
+}
+
+/*
+ * Routine: board_init
+ * Description: Early hardware init.
+ */
+int board_init(void)
+{
+	/* in SRAM or SDRAM, finish GPMC */
+	gpmc_init();
+	/* boot param addr */
+	gd->bd->bi_boot_params = OMAP34XX_SDRC_CS0 + 0x100;
+	return 0;
+}
+
+/*
+ * Routine: get_board_revision
+ * Description: Return board revision.
+ */
+u32 get_board_rev(void)
+{
+	return simple_strtol(hw_build_ptr, NULL, 16);
+}
+
+/*
+ * Routine: setup_board_tags
+ * Description: Append board specific boot tags.
+ */
+void setup_board_tags(struct tag **in_params)
+{
+	int setup_console_atag;
+	char *setup_boot_reason_atag;
+	char *setup_boot_mode_atag;
+	char *str;
+	int i;
+	int size;
+	int total_size;
+	struct tag *params;
+	struct tag_omap *t;
+
+	params = (struct tag *)gd->bd->bi_boot_params;
+
+	params->u.core.flags = 0x0;
+	params->u.core.pagesize = 0x1000;
+	params->u.core.rootdev = 0x0;
+
+	/* append omap atag only if env setup_omap_atag is set to 1 */
+	str = getenv("setup_omap_atag");
+	if (!str || str[0] != '1')
+		return;
+
+	str = getenv("setup_console_atag");
+	if (str && str[0] == '1')
+		setup_console_atag = 1;
+	else
+		setup_console_atag = 0;
+
+	setup_boot_reason_atag = getenv("setup_boot_reason_atag");
+	setup_boot_mode_atag = getenv("setup_boot_mode_atag");
+
+	params = *in_params;
+	t = (struct tag_omap *)&params->u;
+	total_size = sizeof(struct tag_header);
+
+	for (i = 0; omap[i].hdr.tag; i++) {
+
+		/* skip serial console tag */
+		if (!setup_console_atag &&
+			omap[i].hdr.tag == OMAP_TAG_SERIAL_CONSOLE)
+			continue;
+
+		size = omap[i].hdr.size + sizeof(struct tag_omap_header);
+		memcpy(t, &omap[i], size);
+
+		/* set uart tag to 0 - disable serial console */
+		if (!setup_console_atag && omap[i].hdr.tag == OMAP_TAG_UART)
+			t->u.uart.enabled_uarts = 0;
+
+		/* change boot reason */
+		if (setup_boot_reason_atag &&
+			omap[i].hdr.tag == OMAP_TAG_BOOT_REASON) {
+			memset(t->u.boot_reason.reason_str, 0, 12);
+			strcpy(t->u.boot_reason.reason_str,
+				setup_boot_reason_atag);
+		}
+
+		/* change boot mode */
+		if (setup_boot_mode_atag &&
+			omap[i].hdr.tag == OMAP_TAG_VERSION_STR &&
+			strcmp(omap[i].u.version.component, "boot-mode") == 0) {
+			memset(t->u.version.version, 0, 12);
+			strcpy(t->u.version.version, setup_boot_mode_atag);
+		}
+
+		total_size += size;
+		t = tag_omap_next(t);
+
+	}
+
+	params->hdr.tag = ATAG_BOARD;
+	params->hdr.size = total_size >> 2;
+	params = tag_next(params);
+
+	*in_params = params;
+}
+
+/*
+ * Routine: video_hw_init
+ * Description: Set up the GraphicDevice depending on sys_boot.
+ */
+void *video_hw_init(void)
+{
+	/* fill in Graphic Device */
+	gdev.frameAdrs = 0x8f9c0000;
+	gdev.winSizeX = 800;
+	gdev.winSizeY = 480;
+	gdev.gdfBytesPP = 2;
+	gdev.gdfIndex = GDF_16BIT_565RGB;
+	memset((void *)gdev.frameAdrs, 0, 0xbb800);
+	return (void *) &gdev;
+}
+
+/*
+ * Routine: twl4030_regulator_set_mode
+ * Description: Set twl4030 regulator mode over i2c powerbus.
+ */
+static void twl4030_regulator_set_mode(u8 id, u8 mode)
+{
+	u16 msg = MSG_SINGULAR(DEV_GRP_P1, id, mode);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg >> 8,
+			TWL4030_PM_MASTER_PB_WORD_MSB);
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, msg & 0xff,
+			TWL4030_PM_MASTER_PB_WORD_LSB);
+}
+
+static void omap3_emu_romcode_call(u32 service_id, u32 *parameters)
+{
+	u32 i, num_params = *parameters;
+	u32 *sram_scratch_space = (u32 *)OMAP3_PUBLIC_SRAM_SCRATCH_AREA;
+
+	/*
+	 * copy the parameters to an un-cached area to avoid coherency
+	 * issues
+	 */
+	for (i = 0; i < num_params; i++) {
+		__raw_writel(*parameters, sram_scratch_space);
+		parameters++;
+		sram_scratch_space++;
+	}
+
+	/* Now make the PPA call */
+	do_omap3_emu_romcode_call(service_id, OMAP3_PUBLIC_SRAM_SCRATCH_AREA);
+}
+
+/*
+ * Routine: omap3_update_aux_cr_secure_rx51
+ * Description: Modify the contents Auxiliary Control Register.
+ * Parameters:
+ *   set_bits - bits to set in ACR
+ *   clr_bits - bits to clear in ACR
+ */
+static void omap3_update_aux_cr_secure_rx51(u32 set_bits, u32 clear_bits)
+{
+	struct emu_hal_params_rx51 emu_romcode_params = { 0, };
+	u32 acr;
+
+	/* Read ACR */
+	asm volatile ("mrc p15, 0, %0, c1, c0, 1" : "=r" (acr));
+	acr &= ~clear_bits;
+	acr |= set_bits;
+
+	emu_romcode_params.num_params = 2;
+	emu_romcode_params.param1 = acr;
+
+	omap3_emu_romcode_call(OMAP3_EMU_HAL_API_WRITE_ACR,
+				(u32 *)&emu_romcode_params);
+}
+
+/*
+ * Routine: misc_init_r
+ * Description: Configure board specific parts.
+ */
+int misc_init_r(void)
+{
+	char buf[12];
+	u8 state;
+
+	/* reset lp5523 led */
+	i2c_set_bus_num(1);
+	state = 0xff;
+	i2c_write(0x32, 0x3d, 1, &state, 1);
+	i2c_set_bus_num(0);
+
+	/* initialize twl4030 power managment */
+	twl4030_power_init();
+
+	/* set VSIM to 1.8V */
+	twl4030_pmrecv_vsel_cfg(TWL4030_PM_RECEIVER_VSIM_DEDICATED,
+				TWL4030_PM_RECEIVER_VSIM_VSEL_18,
+				TWL4030_PM_RECEIVER_VSIM_DEV_GRP,
+				TWL4030_PM_RECEIVER_DEV_GRP_P1);
+
+	/* store I2C access state */
+	twl4030_i2c_read_u8(TWL4030_CHIP_PM_MASTER, &state,
+			TWL4030_PM_MASTER_PB_CFG);
+
+	/* enable I2C access to powerbus (needed for twl4030 regulator) */
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, 0x02,
+			TWL4030_PM_MASTER_PB_CFG);
+
+	/* set VAUX3, VSIM and VMMC1 state to active - enable eMMC memory */
+	twl4030_regulator_set_mode(RES_VAUX3, RES_STATE_ACTIVE);
+	twl4030_regulator_set_mode(RES_VSIM, RES_STATE_ACTIVE);
+	twl4030_regulator_set_mode(RES_VMMC1, RES_STATE_ACTIVE);
+
+	/* restore I2C access state */
+	twl4030_i2c_write_u8(TWL4030_CHIP_PM_MASTER, state,
+			TWL4030_PM_MASTER_PB_CFG);
+
+	/* set env variable attkernaddr for relocated kernel */
+	sprintf(buf, "%#x", KERNEL_ADDRESS);
+	setenv("attkernaddr", buf);
+
+	/* initialize omap tags */
+	init_omap_tags();
+
+	/* reuse atags from previous bootloader */
+	reuse_atags();
+
+	dieid_num_r();
+	print_cpuinfo();
+
+	/*
+	 * Cortex-A8(r1p0..r1p2) errata 430973 workaround
+	 * Set IBE bit in Auxiliary Control Register
+	 */
+	omap3_update_aux_cr_secure_rx51(1 << 6, 0);
+
+	return 0;
+}
+
+/*
+ * Routine: set_muxconf_regs
+ * Description: Setting up the configuration Mux registers specific to the
+ *		hardware. Many pins need to be moved from protect to primary
+ *		mode.
+ */
+void set_muxconf_regs(void)
+{
+	MUX_RX51();
+}
+
+static unsigned long int twl_wd_time; /* last time of watchdog reset */
+static unsigned long int twl_i2c_lock;
+
+/*
+ * Routine: hw_watchdog_reset
+ * Description: Reset timeout of twl4030 watchdog.
+ */
+void hw_watchdog_reset(void)
+{
+	u8 timeout = 0;
+
+	/* do not reset watchdog too often - max every 4s */
+	if (get_timer(twl_wd_time) < 4 * CONFIG_SYS_HZ)
+		return;
+
+	/* localy lock twl4030 i2c bus */
+	if (test_and_set_bit(0, &twl_i2c_lock))
+		return;
+
+	/* read actual watchdog timeout */
+	twl4030_i2c_read_u8(TWL4030_CHIP_PM_RECEIVER, &timeout,
+			TWL4030_PM_RECEIVER_WATCHDOG_CFG);
+
+	/* timeout 0 means watchdog is disabled */
+	/* reset watchdog timeout to 31s (maximum) */
+	if (timeout != 0)
+		twl4030_i2c_write_u8(TWL4030_CHIP_PM_RECEIVER, 31,
+				TWL4030_PM_RECEIVER_WATCHDOG_CFG);
+
+	/* store last watchdog reset time */
+	twl_wd_time = get_timer(0);
+
+	/* localy unlock twl4030 i2c bus */
+	test_and_clear_bit(0, &twl_i2c_lock);
+}
+
+/*
+ * TWL4030 keypad handler for cfb_console
+ */
+
+static const char keymap[] = {
+	/* normal */
+	'q',  'o',  'p',  ',', '\b',    0,  'a',  's',
+	'w',  'd',  'f',  'g',  'h',  'j',  'k',  'l',
+	'e',  '.',    0,  '\r',   0,  'z',  'x',  'c',
+	'r',  'v',  'b',  'n',  'm',  ' ',  ' ',    0,
+	't',    0,    0,    0,    0,    0,    0,    0,
+	'y',    0,    0,    0,    0,    0,    0,    0,
+	'u',    0,    0,    0,    0,    0,    0,    0,
+	'i',    5,    6,    0,    0,    0,    0,    0,
+	/* fn */
+	'1',  '9',  '0',  '=', '\b',    0,  '*',  '+',
+	'2',  '#',  '-',  '_',  '(',  ')',  '&',  '!',
+	'3',  '?',  '^', '\r',    0,  156,  '$',  238,
+	'4',  '/', '\\',  '"', '\'',  '@',    0,  '<',
+	'5',  '|',  '>',    0,    0,    0,    0,    0,
+	'6',    0,    0,    0,    0,    0,    0,    0,
+	'7',    0,    0,    0,    0,    0,    0,    0,
+	'8',   16,   17,    0,    0,    0,    0,    0,
+};
+
+static u8 keys[8];
+static u8 old_keys[8] = {0, 0, 0, 0, 0, 0, 0, 0};
+#define KEYBUF_SIZE 32
+static u8 keybuf[KEYBUF_SIZE];
+static u8 keybuf_head;
+static u8 keybuf_tail;
+
+/*
+ * Routine: rx51_kp_init
+ * Description: Initialize HW keyboard.
+ */
+int rx51_kp_init(void)
+{
+	int ret = 0;
+	u8 ctrl;
+	ret = twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &ctrl,
+		TWL4030_KEYPAD_KEYP_CTRL_REG);
+
+	if (ret)
+		return ret;
+
+	/* turn on keyboard and use hardware scanning */
+	ctrl |= TWL4030_KEYPAD_CTRL_KBD_ON;
+	ctrl |= TWL4030_KEYPAD_CTRL_SOFT_NRST;
+	ctrl |= TWL4030_KEYPAD_CTRL_SOFTMODEN;
+	ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, ctrl,
+				TWL4030_KEYPAD_KEYP_CTRL_REG);
+	/* enable key event status */
+	ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0xfe,
+				TWL4030_KEYPAD_KEYP_IMR1);
+	/* enable interrupt generation on rising and falling */
+	/* this is a workaround for qemu twl4030 emulation */
+	ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x57,
+				TWL4030_KEYPAD_KEYP_EDR);
+	/* enable ISR clear on read */
+	ret |= twl4030_i2c_write_u8(TWL4030_CHIP_KEYPAD, 0x05,
+				TWL4030_KEYPAD_KEYP_SIH_CTRL);
+	return 0;
+}
+
+static void rx51_kp_fill(u8 k, u8 mods)
+{
+	/* check if some cursor key without meta fn key was pressed */
+	if (!(mods & 2) && (k == 18 || k == 31 || k == 33 || k == 34)) {
+		keybuf[keybuf_tail++] = '\e';
+		keybuf_tail %= KEYBUF_SIZE;
+		keybuf[keybuf_tail++] = '[';
+		keybuf_tail %= KEYBUF_SIZE;
+		if (k == 18) /* up */
+			keybuf[keybuf_tail++] = 'A';
+		else if (k == 31) /* left */
+			keybuf[keybuf_tail++] = 'D';
+		else if (k == 33) /* down */
+			keybuf[keybuf_tail++] = 'B';
+		else if (k == 34) /* right */
+			keybuf[keybuf_tail++] = 'C';
+		keybuf_tail %= KEYBUF_SIZE;
+		return;
+	}
+
+	if (mods & 2) { /* fn meta key was pressed */
+		k = keymap[k+64];
+	} else {
+		k = keymap[k];
+		if (mods & 1) { /* ctrl key was pressed */
+			if (k >= 'a' && k <= 'z')
+				k -= 'a' - 1;
+		}
+		if (mods & 4) { /* shift key was pressed */
+			if (k >= 'a' && k <= 'z')
+				k += 'A' - 'a';
+			else if (k == '.')
+				k = ':';
+			else if (k == ',')
+				k = ';';
+		}
+	}
+	keybuf[keybuf_tail++] = k;
+	keybuf_tail %= KEYBUF_SIZE;
+}
+
+/*
+ * Routine: rx51_kp_tstc
+ * Description: Test if key was pressed (from buffer).
+ */
+int rx51_kp_tstc(void)
+{
+	u8 c, r, dk, i;
+	u8 intr;
+	u8 mods;
+
+	/* localy lock twl4030 i2c bus */
+	if (test_and_set_bit(0, &twl_i2c_lock))
+		return 0;
+
+	/* twl4030 remembers up to 2 events */
+	for (i = 0; i < 2; i++) {
+
+		/* check interrupt register for events */
+		twl4030_i2c_read_u8(TWL4030_CHIP_KEYPAD, &intr,
+				TWL4030_KEYPAD_KEYP_ISR1+(2*i));
+
+		/* no event */
+		if (!(intr&1))
+			continue;
+
+		/* read the key state */
+		i2c_read(TWL4030_CHIP_KEYPAD,
+			TWL4030_KEYPAD_FULL_CODE_7_0, 1, keys, 8);
+
+		/* cut out modifier keys from the keystate */
+		mods = keys[4] >> 4;
+		keys[4] &= 0x0f;
+
+		for (c = 0; c < 8; c++) {
+
+			/* get newly pressed keys only */
+			dk = ((keys[c] ^ old_keys[c])&keys[c]);
+			old_keys[c] = keys[c];
+
+			/* fill the keybuf */
+			for (r = 0; r < 8; r++) {
+				if (dk&1)
+					rx51_kp_fill((c*8)+r, mods);
+				dk = dk >> 1;
+			}
+
+		}
+
+	}
+
+	/* localy unlock twl4030 i2c bus */
+	test_and_clear_bit(0, &twl_i2c_lock);
+
+	return (KEYBUF_SIZE + keybuf_tail - keybuf_head)%KEYBUF_SIZE;
+}
+
+/*
+ * Routine: rx51_kp_getc
+ * Description: Get last pressed key (from buffer).
+ */
+int rx51_kp_getc(void)
+{
+	keybuf_head %= KEYBUF_SIZE;
+	while (!rx51_kp_tstc())
+		WATCHDOG_RESET();
+	return keybuf[keybuf_head++];
+}
+
+/*
+ * Routine: board_mmc_init
+ * Description: Initialize mmc devices.
+ */
+int board_mmc_init(bd_t *bis)
+{
+	omap_mmc_init(0, 0, 0);
+	omap_mmc_init(1, 0, 0);
+	return 0;
+}
diff --git a/board/nokia/rx51/rx51.h b/board/nokia/rx51/rx51.h
new file mode 100644
index 0000000..e66e241
--- /dev/null
+++ b/board/nokia/rx51/rx51.h
@@ -0,0 +1,389 @@
+/*
+ * (C) Copyright 2012
+ * Ивайло Димитров <freemangordon@abv.bg>
+ *
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2008
+ * Dirk Behme <dirk.behme@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#ifndef _RX51_H_
+#define _RX51_H_
+
+/* Needed for ROM SMC call */
+struct emu_hal_params_rx51 {
+	u32 num_params;
+	u32 param1;
+	u32 param2;
+	u32 param3;
+	u32 param4;
+};
+
+int print_cpuinfo(void);
+
+/*
+ * IEN  - Input Enable
+ * IDIS - Input Disable
+ * PTD  - Pull type Down
+ * PTU  - Pull type Up
+ * DIS  - Pull type selection is inactive
+ * EN   - Pull type selection is active
+ * M0   - Mode 0
+ * The commented string gives the final mux configuration for that pin
+ */
+#define MUX_RX51() \
+/* SDRC */\
+	MUX_VAL(CP(SDRC_D0),		(IEN  | PTD | DIS | M0)) /*SDRC_D0*/\
+	MUX_VAL(CP(SDRC_D1),		(IEN  | PTD | DIS | M0)) /*SDRC_D1*/\
+	MUX_VAL(CP(SDRC_D2),		(IEN  | PTD | DIS | M0)) /*SDRC_D2*/\
+	MUX_VAL(CP(SDRC_D3),		(IEN  | PTD | DIS | M0)) /*SDRC_D3*/\
+	MUX_VAL(CP(SDRC_D4),		(IEN  | PTD | DIS | M0)) /*SDRC_D4*/\
+	MUX_VAL(CP(SDRC_D5),		(IEN  | PTD | DIS | M0)) /*SDRC_D5*/\
+	MUX_VAL(CP(SDRC_D6),		(IEN  | PTD | DIS | M0)) /*SDRC_D6*/\
+	MUX_VAL(CP(SDRC_D7),		(IEN  | PTD | DIS | M0)) /*SDRC_D7*/\
+	MUX_VAL(CP(SDRC_D8),		(IEN  | PTD | DIS | M0)) /*SDRC_D8*/\
+	MUX_VAL(CP(SDRC_D9),		(IEN  | PTD | DIS | M0)) /*SDRC_D9*/\
+	MUX_VAL(CP(SDRC_D10),		(IEN  | PTD | DIS | M0)) /*SDRC_D10*/\
+	MUX_VAL(CP(SDRC_D11),		(IEN  | PTD | DIS | M0)) /*SDRC_D11*/\
+	MUX_VAL(CP(SDRC_D12),		(IEN  | PTD | DIS | M0)) /*SDRC_D12*/\
+	MUX_VAL(CP(SDRC_D13),		(IEN  | PTD | DIS | M0)) /*SDRC_D13*/\
+	MUX_VAL(CP(SDRC_D14),		(IEN  | PTD | DIS | M0)) /*SDRC_D14*/\
+	MUX_VAL(CP(SDRC_D15),		(IEN  | PTD | DIS | M0)) /*SDRC_D15*/\
+	MUX_VAL(CP(SDRC_D16),		(IEN  | PTD | DIS | M0)) /*SDRC_D16*/\
+	MUX_VAL(CP(SDRC_D17),		(IEN  | PTD | DIS | M0)) /*SDRC_D17*/\
+	MUX_VAL(CP(SDRC_D18),		(IEN  | PTD | DIS | M0)) /*SDRC_D18*/\
+	MUX_VAL(CP(SDRC_D19),		(IEN  | PTD | DIS | M0)) /*SDRC_D19*/\
+	MUX_VAL(CP(SDRC_D20),		(IEN  | PTD | DIS | M0)) /*SDRC_D20*/\
+	MUX_VAL(CP(SDRC_D21),		(IEN  | PTD | DIS | M0)) /*SDRC_D21*/\
+	MUX_VAL(CP(SDRC_D22),		(IEN  | PTD | DIS | M0)) /*SDRC_D22*/\
+	MUX_VAL(CP(SDRC_D23),		(IEN  | PTD | DIS | M0)) /*SDRC_D23*/\
+	MUX_VAL(CP(SDRC_D24),		(IEN  | PTD | DIS | M0)) /*SDRC_D24*/\
+	MUX_VAL(CP(SDRC_D25),		(IEN  | PTD | DIS | M0)) /*SDRC_D25*/\
+	MUX_VAL(CP(SDRC_D26),		(IEN  | PTD | DIS | M0)) /*SDRC_D26*/\
+	MUX_VAL(CP(SDRC_D27),		(IEN  | PTD | DIS | M0)) /*SDRC_D27*/\
+	MUX_VAL(CP(SDRC_D28),		(IEN  | PTD | DIS | M0)) /*SDRC_D28*/\
+	MUX_VAL(CP(SDRC_D29),		(IEN  | PTD | DIS | M0)) /*SDRC_D29*/\
+	MUX_VAL(CP(SDRC_D30),		(IEN  | PTD | DIS | M0)) /*SDRC_D30*/\
+	MUX_VAL(CP(SDRC_D31),		(IEN  | PTD | DIS | M0)) /*SDRC_D31*/\
+	MUX_VAL(CP(SDRC_CLK),		(IEN  | PTD | DIS | M0)) /*SDRC_CLK*/\
+	MUX_VAL(CP(SDRC_DQS0),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS0*/\
+	MUX_VAL(CP(SDRC_DQS1),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS1*/\
+	MUX_VAL(CP(SDRC_DQS2),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS2*/\
+	MUX_VAL(CP(SDRC_DQS3),		(IEN  | PTD | DIS | M0)) /*SDRC_DQS3*/\
+/* GPMC */\
+	MUX_VAL(CP(GPMC_A1),		(IDIS | PTD | DIS | M0)) /*GPMC_A1*/\
+	MUX_VAL(CP(GPMC_A2),		(IDIS | PTD | DIS | M0)) /*GPMC_A2*/\
+	MUX_VAL(CP(GPMC_A3),		(IDIS | PTD | DIS | M0)) /*GPMC_A3*/\
+	MUX_VAL(CP(GPMC_A4),		(IDIS | PTD | DIS | M0)) /*GPMC_A4*/\
+	MUX_VAL(CP(GPMC_A5),		(IDIS | PTD | DIS | M0)) /*GPMC_A5*/\
+	MUX_VAL(CP(GPMC_A6),		(IDIS | PTD | DIS | M0)) /*GPMC_A6*/\
+	MUX_VAL(CP(GPMC_A7),		(IDIS | PTD | DIS | M0)) /*GPMC_A7*/\
+	MUX_VAL(CP(GPMC_A8),		(IDIS | PTD | DIS | M0)) /*GPMC_A8*/\
+	MUX_VAL(CP(GPMC_A9),		(IDIS | PTD | DIS | M0)) /*GPMC_A9*/\
+	MUX_VAL(CP(GPMC_A10),		(IDIS | PTD | DIS | M0)) /*GPMC_A10*/\
+	MUX_VAL(CP(GPMC_D0),		(IEN  | PTD | DIS | M0)) /*GPMC_D0*/\
+	MUX_VAL(CP(GPMC_D1),		(IEN  | PTD | DIS | M0)) /*GPMC_D1*/\
+	MUX_VAL(CP(GPMC_D2),		(IEN  | PTD | DIS | M0)) /*GPMC_D2*/\
+	MUX_VAL(CP(GPMC_D3),		(IEN  | PTD | DIS | M0)) /*GPMC_D3*/\
+	MUX_VAL(CP(GPMC_D4),		(IEN  | PTD | DIS | M0)) /*GPMC_D4*/\
+	MUX_VAL(CP(GPMC_D5),		(IEN  | PTD | DIS | M0)) /*GPMC_D5*/\
+	MUX_VAL(CP(GPMC_D6),		(IEN  | PTD | DIS | M0)) /*GPMC_D6*/\
+	MUX_VAL(CP(GPMC_D7),		(IEN  | PTD | DIS | M0)) /*GPMC_D7*/\
+	MUX_VAL(CP(GPMC_D8),		(IEN  | PTD | DIS | M0)) /*GPMC_D8*/\
+	MUX_VAL(CP(GPMC_D9),		(IEN  | PTD | DIS | M0)) /*GPMC_D9*/\
+	MUX_VAL(CP(GPMC_D10),		(IEN  | PTD | DIS | M0)) /*GPMC_D10*/\
+	MUX_VAL(CP(GPMC_D11),		(IEN  | PTD | DIS | M0)) /*GPMC_D11*/\
+	MUX_VAL(CP(GPMC_D12),		(IEN  | PTD | DIS | M0)) /*GPMC_D12*/\
+	MUX_VAL(CP(GPMC_D13),		(IEN  | PTD | DIS | M0)) /*GPMC_D13*/\
+	MUX_VAL(CP(GPMC_D14),		(IEN  | PTD | DIS | M0)) /*GPMC_D14*/\
+	MUX_VAL(CP(GPMC_D15),		(IEN  | PTD | DIS | M0)) /*GPMC_D15*/\
+	MUX_VAL(CP(GPMC_NCS0),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS0*/\
+	MUX_VAL(CP(GPMC_NCS1),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS1*/\
+	MUX_VAL(CP(GPMC_NCS2),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS2*/\
+	MUX_VAL(CP(GPMC_NCS3),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS3*/\
+	MUX_VAL(CP(GPMC_NCS4),		(IDIS | PTU | EN  | M0)) /*GPMC_nCS4*/\
+	MUX_VAL(CP(GPMC_NCS5),		(IDIS | PTD | DIS | M0)) /*GPMC_nCS5*/\
+	MUX_VAL(CP(GPMC_NCS6),		(IEN  | PTD | DIS | M1)) /*nDMA_REQ2*/\
+	MUX_VAL(CP(GPMC_NCS7),		(IEN  | PTU | EN  | M1)) /*nDMA_REQ3*/\
+	MUX_VAL(CP(GPMC_NBE1),		(IEN  | PTD | DIS | M0)) /*GPMC_nBE1*/\
+	MUX_VAL(CP(GPMC_WAIT2),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT2*/\
+	MUX_VAL(CP(GPMC_WAIT3),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT3*/\
+	MUX_VAL(CP(GPMC_CLK),		(IDIS | PTD | DIS | M0)) /*GPMC_CLK*/\
+	MUX_VAL(CP(GPMC_NADV_ALE),	(IDIS | PTD | DIS | M0)) /*GPMC_nADV*/\
+	MUX_VAL(CP(GPMC_NOE),		(IDIS | PTD | DIS | M0)) /*GPMC_nOE*/\
+	MUX_VAL(CP(GPMC_NWE),		(IDIS | PTD | DIS | M0)) /*GPMC_nWE*/\
+	MUX_VAL(CP(GPMC_NBE0_CLE),	(IDIS | PTD | DIS | M0)) /*GPMC_nBE0*/\
+	MUX_VAL(CP(GPMC_NWP),		(IEN  | PTD | DIS | M0)) /*GPMC_nWP*/\
+	MUX_VAL(CP(GPMC_WAIT0),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT0*/\
+	MUX_VAL(CP(GPMC_WAIT1),		(IEN  | PTU | EN  | M0)) /*GPMC_WAIT1*/\
+/* DSS */\
+	MUX_VAL(CP(DSS_PCLK),		(IDIS | PTD | DIS | M0)) /*DSS_PCLK*/\
+	MUX_VAL(CP(DSS_HSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_HSYNC*/\
+	MUX_VAL(CP(DSS_VSYNC),		(IDIS | PTD | DIS | M0)) /*DSS_VSYNC*/\
+	MUX_VAL(CP(DSS_ACBIAS),		(IDIS | PTD | DIS | M0)) /*DSS_ACBIAS*/\
+	MUX_VAL(CP(DSS_DATA0),		(IDIS | PTD | DIS | M0)) /*DSS_DATA0*/\
+	MUX_VAL(CP(DSS_DATA1),		(IDIS | PTD | DIS | M0)) /*DSS_DATA1*/\
+	MUX_VAL(CP(DSS_DATA2),		(IDIS | PTD | DIS | M0)) /*DSS_DATA2*/\
+	MUX_VAL(CP(DSS_DATA3),		(IDIS | PTD | DIS | M0)) /*DSS_DATA3*/\
+	MUX_VAL(CP(DSS_DATA4),		(IDIS | PTD | DIS | M0)) /*DSS_DATA4*/\
+	MUX_VAL(CP(DSS_DATA5),		(IDIS | PTD | DIS | M0)) /*DSS_DATA5*/\
+	MUX_VAL(CP(DSS_DATA6),		(IDIS | PTD | DIS | M0)) /*DSS_DATA6*/\
+	MUX_VAL(CP(DSS_DATA7),		(IDIS | PTD | DIS | M0)) /*DSS_DATA7*/\
+	MUX_VAL(CP(DSS_DATA8),		(IDIS | PTD | DIS | M0)) /*DSS_DATA8*/\
+	MUX_VAL(CP(DSS_DATA9),		(IDIS | PTD | DIS | M0)) /*DSS_DATA9*/\
+	MUX_VAL(CP(DSS_DATA10),		(IDIS | PTD | DIS | M0)) /*DSS_DATA10*/\
+	MUX_VAL(CP(DSS_DATA11),		(IDIS | PTD | DIS | M0)) /*DSS_DATA11*/\
+	MUX_VAL(CP(DSS_DATA12),		(IDIS | PTD | DIS | M0)) /*DSS_DATA12*/\
+	MUX_VAL(CP(DSS_DATA13),		(IDIS | PTD | DIS | M0)) /*DSS_DATA13*/\
+	MUX_VAL(CP(DSS_DATA14),		(IDIS | PTD | DIS | M0)) /*DSS_DATA14*/\
+	MUX_VAL(CP(DSS_DATA15),		(IDIS | PTD | DIS | M0)) /*DSS_DATA15*/\
+	MUX_VAL(CP(DSS_DATA16),		(IDIS | PTD | DIS | M0)) /*DSS_DATA16*/\
+	MUX_VAL(CP(DSS_DATA17),		(IDIS | PTD | DIS | M0)) /*DSS_DATA17*/\
+	MUX_VAL(CP(DSS_DATA18),		(IDIS | PTD | DIS | M0)) /*DSS_DATA18*/\
+	MUX_VAL(CP(DSS_DATA19),		(IDIS | PTD | DIS | M0)) /*DSS_DATA19*/\
+	MUX_VAL(CP(DSS_DATA20),		(IDIS | PTD | DIS | M0)) /*DSS_DATA20*/\
+	MUX_VAL(CP(DSS_DATA21),		(IDIS | PTD | DIS | M0)) /*DSS_DATA21*/\
+	MUX_VAL(CP(DSS_DATA22),		(IDIS | PTD | DIS | M0)) /*DSS_DATA22*/\
+	MUX_VAL(CP(DSS_DATA23),		(IDIS | PTD | DIS | M0)) /*DSS_DATA23*/\
+/* CAMERA */\
+	MUX_VAL(CP(CAM_HS),		(IEN  | PTU | EN  | M0)) /*CAM_HS*/\
+	MUX_VAL(CP(CAM_VS),		(IEN  | PTU | EN  | M0)) /*CAM_VS*/\
+	MUX_VAL(CP(CAM_XCLKA),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKA*/\
+	MUX_VAL(CP(CAM_PCLK),		(IEN  | PTU | EN  | M0)) /*CAM_PCLK*/\
+	MUX_VAL(CP(CAM_FLD),		(IDIS | PTD | DIS | M4)) /*GPIO_98*/\
+	MUX_VAL(CP(CAM_D0),		(IEN  | PTD | DIS | M0)) /*CAM_D0*/\
+	MUX_VAL(CP(CAM_D1),		(IEN  | PTD | DIS | M0)) /*CAM_D1*/\
+	MUX_VAL(CP(CAM_D2),		(IEN  | PTD | DIS | M0)) /*CAM_D2*/\
+	MUX_VAL(CP(CAM_D3),		(IEN  | PTD | DIS | M0)) /*CAM_D3*/\
+	MUX_VAL(CP(CAM_D4),		(IEN  | PTD | DIS | M0)) /*CAM_D4*/\
+	MUX_VAL(CP(CAM_D5),		(IEN  | PTD | DIS | M0)) /*CAM_D5*/\
+	MUX_VAL(CP(CAM_D6),		(IEN  | PTD | DIS | M0)) /*CAM_D6*/\
+	MUX_VAL(CP(CAM_D7),		(IEN  | PTD | DIS | M0)) /*CAM_D7*/\
+	MUX_VAL(CP(CAM_D8),		(IEN  | PTD | DIS | M0)) /*CAM_D8*/\
+	MUX_VAL(CP(CAM_D9),		(IEN  | PTD | DIS | M0)) /*CAM_D9*/\
+	MUX_VAL(CP(CAM_D10),		(IEN  | PTD | DIS | M0)) /*CAM_D10*/\
+	MUX_VAL(CP(CAM_D11),		(IEN  | PTD | DIS | M0)) /*CAM_D11*/\
+	MUX_VAL(CP(CAM_XCLKB),		(IDIS | PTD | DIS | M0)) /*CAM_XCLKB*/\
+	MUX_VAL(CP(CAM_WEN),		(IEN  | PTD | DIS | M4)) /*GPIO_167*/\
+	MUX_VAL(CP(CAM_STROBE),		(IDIS | PTD | DIS | M0)) /*CAM_STROBE*/\
+	MUX_VAL(CP(CSI2_DX0),		(IEN  | PTD | DIS | M0)) /*CSI2_DX0*/\
+	MUX_VAL(CP(CSI2_DY0),		(IEN  | PTD | DIS | M0)) /*CSI2_DY0*/\
+	MUX_VAL(CP(CSI2_DX1),		(IEN  | PTD | DIS | M0)) /*CSI2_DX1*/\
+	MUX_VAL(CP(CSI2_DY1),		(IEN  | PTD | DIS | M0)) /*CSI2_DY1*/\
+/* Audio Interface */\
+	MUX_VAL(CP(MCBSP2_FSX),		(IEN  | PTD | DIS | M0)) /*McBSP2_FSX*/\
+	MUX_VAL(CP(MCBSP2_CLKX),	(IEN  | PTD | DIS | M0)) /*McBSP2_CLK*/\
+	MUX_VAL(CP(MCBSP2_DR),		(IEN  | PTD | DIS | M0)) /*McBSP2_DR*/\
+	MUX_VAL(CP(MCBSP2_DX),		(IDIS | PTD | DIS | M0)) /*McBSP2_DX*/\
+/* Expansion card */\
+	MUX_VAL(CP(MMC1_CLK),		(IDIS | PTU | EN  | M0)) /*MMC1_CLK*/\
+	MUX_VAL(CP(MMC1_CMD),		(IEN  | PTU | EN  | M0)) /*MMC1_CMD*/\
+	MUX_VAL(CP(MMC1_DAT0),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT0*/\
+	MUX_VAL(CP(MMC1_DAT1),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT1*/\
+	MUX_VAL(CP(MMC1_DAT2),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT2*/\
+	MUX_VAL(CP(MMC1_DAT3),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT3*/\
+	MUX_VAL(CP(MMC1_DAT4),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT4*/\
+	MUX_VAL(CP(MMC1_DAT5),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT5*/\
+	MUX_VAL(CP(MMC1_DAT6),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT6*/\
+	MUX_VAL(CP(MMC1_DAT7),		(IEN  | PTU | EN  | M0)) /*MMC1_DAT7*/\
+/* Wireless LAN */\
+	MUX_VAL(CP(MMC2_CLK),		(IEN  | PTU | EN  | M4)) /*GPIO_130*/\
+	MUX_VAL(CP(MMC2_CMD),		(IEN  | PTU | EN  | M4)) /*GPIO_131*/\
+	MUX_VAL(CP(MMC2_DAT0),		(IEN  | PTU | EN  | M4)) /*GPIO_132*/\
+	MUX_VAL(CP(MMC2_DAT1),		(IEN  | PTU | EN  | M4)) /*GPIO_133*/\
+	MUX_VAL(CP(MMC2_DAT2),		(IEN  | PTU | EN  | M4)) /*GPIO_134*/\
+	MUX_VAL(CP(MMC2_DAT3),		(IEN  | PTU | EN  | M4)) /*GPIO_135*/\
+	MUX_VAL(CP(MMC2_DAT4),		(IEN  | PTU | EN  | M4)) /*GPIO_136*/\
+	MUX_VAL(CP(MMC2_DAT5),		(IEN  | PTU | EN  | M4)) /*GPIO_137*/\
+	MUX_VAL(CP(MMC2_DAT6),		(IEN  | PTU | EN  | M4)) /*GPIO_138*/\
+	MUX_VAL(CP(MMC2_DAT7),		(IEN  | PTU | EN  | M4)) /*GPIO_139*/\
+/* Bluetooth */\
+	MUX_VAL(CP(MCBSP3_DX),		(IEN  | PTD | DIS | M1)) /*UART2_CTS*/\
+	MUX_VAL(CP(MCBSP3_DR),		(IDIS | PTD | DIS | M1)) /*UART2_RTS*/\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IDIS | PTD | DIS | M1)) /*UART2_TX*/\
+	MUX_VAL(CP(MCBSP3_FSX),		(IEN  | PTD | DIS | M1)) /*UART2_RX*/\
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTD | DIS | M4)) /*GPIO_144*/\
+	MUX_VAL(CP(UART2_RTS),		(IEN  | PTD | DIS | M4)) /*GPIO_145*/\
+	MUX_VAL(CP(UART2_TX),		(IEN  | PTD | DIS | M4)) /*GPIO_146*/\
+	MUX_VAL(CP(UART2_RX),		(IEN  | PTD | DIS | M4)) /*GPIO_147*/\
+/* Modem Interface */\
+	MUX_VAL(CP(UART1_TX),		(IDIS | PTD | DIS | M0)) /*UART1_TX*/\
+	MUX_VAL(CP(UART1_RTS),		(IDIS | PTD | DIS | M4)) /*GPIO_149*/\
+	MUX_VAL(CP(UART1_CTS),		(IDIS | PTD | DIS | M4)) /*GPIO_150*/\
+	MUX_VAL(CP(UART1_RX),		(IEN  | PTD | DIS | M0)) /*UART1_RX*/\
+	MUX_VAL(CP(MCBSP4_CLKX),	(IEN  | PTD | DIS | M1)) /*SSI1_DAT*/\
+	MUX_VAL(CP(MCBSP4_DR),		(IEN  | PTD | DIS | M1)) /*SSI1_FLAG*/\
+	MUX_VAL(CP(MCBSP4_DX),		(IEN  | PTD | DIS | M1)) /*SSI1_RDY*/\
+	MUX_VAL(CP(MCBSP4_FSX),		(IEN  | PTD | DIS | M1)) /*SSI1_WAKE*/\
+	MUX_VAL(CP(MCBSP1_CLKR),	(IDIS | PTD | DIS | M4)) /*GPIO_156*/\
+	MUX_VAL(CP(MCBSP1_FSR),		(IDIS | PTU | EN  | M4)) /*GPIO_157*/\
+	MUX_VAL(CP(MCBSP1_DX),		(IDIS | PTD | DIS | M4)) /*GPIO_158*/\
+	MUX_VAL(CP(MCBSP1_DR),		(IDIS | PTD | DIS | M4)) /*GPIO_159*/\
+	MUX_VAL(CP(MCBSP_CLKS),		(IEN  | PTU | DIS | M0)) /*McBSP_CLKS*/\
+	MUX_VAL(CP(MCBSP1_FSX),		(IDIS | PTD | DIS | M4)) /*GPIO_161*/\
+	MUX_VAL(CP(MCBSP1_CLKX),	(IDIS | PTD | DIS | M4)) /*GPIO_162*/\
+/* Serial Interface */\
+	MUX_VAL(CP(UART3_CTS_RCTX),	(IEN  | PTD | EN  | M0)) /*UART3_CTS*/\
+	MUX_VAL(CP(UART3_RTS_SD),	(IDIS | PTD | DIS | M0)) /*UART3_RTS*/\
+	MUX_VAL(CP(UART3_RX_IRRX),	(IEN  | PTD | DIS | M0)) /*UART3_RX*/\
+	MUX_VAL(CP(UART3_TX_IRTX),	(IDIS | PTD | DIS | M0)) /*UART3_TX*/\
+	MUX_VAL(CP(HSUSB0_CLK),		(IEN  | PTD | DIS | M0)) /*HSUSB0_CLK*/\
+	MUX_VAL(CP(HSUSB0_STP),		(IDIS | PTU | EN  | M0)) /*HSUSB0_STP*/\
+	MUX_VAL(CP(HSUSB0_DIR),		(IEN  | PTD | DIS | M0)) /*HSUSB0_DIR*/\
+	MUX_VAL(CP(HSUSB0_NXT),		(IEN  | PTD | DIS | M0)) /*HSUSB0_NXT*/\
+	MUX_VAL(CP(HSUSB0_DATA0),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA0*/\
+	MUX_VAL(CP(HSUSB0_DATA1),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA1*/\
+	MUX_VAL(CP(HSUSB0_DATA2),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA2*/\
+	MUX_VAL(CP(HSUSB0_DATA3),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA3*/\
+	MUX_VAL(CP(HSUSB0_DATA4),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA4*/\
+	MUX_VAL(CP(HSUSB0_DATA5),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA5*/\
+	MUX_VAL(CP(HSUSB0_DATA6),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA6*/\
+	MUX_VAL(CP(HSUSB0_DATA7),	(IEN  | PTD | DIS | M0)) /*HSUSB0_DA7*/\
+	MUX_VAL(CP(I2C1_SCL),		(IEN  | PTU | EN  | M0)) /*I2C1_SCL*/\
+	MUX_VAL(CP(I2C1_SDA),		(IEN  | PTU | EN  | M0)) /*I2C1_SDA*/\
+	MUX_VAL(CP(I2C2_SCL),		(IEN  | PTU | EN  | M4)) /*GPIO_168*/\
+	MUX_VAL(CP(I2C2_SDA),		(IEN  | PTU | EN  | M4)) /*GPIO_183*/\
+	MUX_VAL(CP(I2C3_SCL),		(IEN  | PTU | EN  | M0)) /*I2C3_SCL*/\
+	MUX_VAL(CP(I2C3_SDA),		(IEN  | PTU | EN  | M0)) /*I2C3_SDA*/\
+	MUX_VAL(CP(I2C4_SCL),		(IEN  | PTU | EN  | M0)) /*I2C4_SCL*/\
+	MUX_VAL(CP(I2C4_SDA),		(IEN  | PTU | EN  | M0)) /*I2C4_SDA*/\
+	MUX_VAL(CP(HDQ_SIO),		(IDIS | PTU | EN  | M4)) /*GPIO_170*/\
+	MUX_VAL(CP(MCSPI1_CLK),		(IEN  | PTU | EN  | M4)) /*GPIO_171*/\
+	MUX_VAL(CP(MCSPI1_SIMO),	(IEN  | PTU | EN  | M4)) /*GPIO_172*/\
+	MUX_VAL(CP(MCSPI1_SOMI),	(IEN  | PTD | DIS | M0)) /*McSPI1_SOM*/\
+	MUX_VAL(CP(MCSPI1_CS0),		(IEN  | PTD | EN  | M0)) /*McSPI1_CS0*/\
+	MUX_VAL(CP(MCSPI1_CS1),		(IDIS | PTD | EN  | M0)) /*McSPI1_CS1*/\
+	MUX_VAL(CP(MCSPI1_CS2),		(IDIS | PTD | DIS | M4)) /*GPIO_176*/\
+/* USB EHCI (port 2) */\
+	MUX_VAL(CP(MCSPI1_CS3),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DA2*/\
+	MUX_VAL(CP(MCSPI2_CLK),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DA7*/\
+	MUX_VAL(CP(MCSPI2_SIMO),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DA4*/\
+	MUX_VAL(CP(MCSPI2_SOMI),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DA5*/\
+	MUX_VAL(CP(MCSPI2_CS0),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DA6*/\
+	MUX_VAL(CP(MCSPI2_CS1),		(IEN  | PTU | DIS | M3)) /*HSUSB2_DA3*/\
+	MUX_VAL(CP(ETK_D10_ES2),	(IDIS | PTU | DIS | M3)) /*HSUSB2_CLK*/\
+	MUX_VAL(CP(ETK_D11_ES2),	(IDIS | PTU | DIS | M3)) /*HSUSB2_STP*/\
+	MUX_VAL(CP(ETK_D12_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DIR*/\
+	MUX_VAL(CP(ETK_D13_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_NXT*/\
+	MUX_VAL(CP(ETK_D14_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DA0*/\
+	MUX_VAL(CP(ETK_D15_ES2),	(IEN  | PTU | DIS | M3)) /*HSUSB2_DA1*/\
+/* Control and debug */\
+	MUX_VAL(CP(SYS_32K),		(IEN  | PTD | DIS | M0)) /*SYS_32K*/\
+	MUX_VAL(CP(SYS_CLKREQ),		(IEN  | PTD | DIS | M0)) /*SYS_CLKREQ*/\
+	MUX_VAL(CP(SYS_NIRQ),		(IEN  | PTU | EN  | M0)) /*SYS_nIRQ*/\
+	MUX_VAL(CP(SYS_BOOT0),		(IEN  | PTD | DIS | M4)) /*GPIO_2*/\
+	MUX_VAL(CP(SYS_BOOT1),		(IEN  | PTD | DIS | M4)) /*GPIO_3*/\
+	MUX_VAL(CP(SYS_BOOT2),		(IEN  | PTD | DIS | M4)) /*MMC1_WP*/\
+	MUX_VAL(CP(SYS_BOOT3),		(IEN  | PTD | DIS | M4)) /*GPIO_5*/\
+	MUX_VAL(CP(SYS_BOOT4),		(IEN  | PTD | DIS | M4)) /*GPIO_6*/\
+	MUX_VAL(CP(SYS_BOOT5),		(IEN  | PTD | DIS | M4)) /*GPIO_7*/\
+	MUX_VAL(CP(SYS_BOOT6),		(IDIS | PTD | DIS | M4)) /*GPIO_8*/\
+	MUX_VAL(CP(SYS_OFF_MODE),	(IEN  | PTD | DIS | M0)) /*SYS_OFF_MD*/\
+	MUX_VAL(CP(SYS_CLKOUT1),	(IEN  | PTD | DIS | M0)) /*SYS_CLKOUT*/\
+	MUX_VAL(CP(SYS_CLKOUT2),	(IEN  | PTU | EN  | M4)) /*GPIO_186*/\
+	MUX_VAL(CP(ETK_CLK_ES2),	(IDIS | PTU | EN  | M3)) /*HSUSB1_STP*/\
+	MUX_VAL(CP(ETK_CTL_ES2),	(IDIS | PTU | DIS | M3)) /*HSUSB1_CLK*/\
+	MUX_VAL(CP(ETK_D0_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA0*/\
+	MUX_VAL(CP(ETK_D1_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA1*/\
+	MUX_VAL(CP(ETK_D2_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA2*/\
+	MUX_VAL(CP(ETK_D3_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA7*/\
+	MUX_VAL(CP(ETK_D4_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA4*/\
+	MUX_VAL(CP(ETK_D5_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA5*/\
+	MUX_VAL(CP(ETK_D6_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA6*/\
+	MUX_VAL(CP(ETK_D7_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DA3*/\
+	MUX_VAL(CP(ETK_D8_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_DIR*/\
+	MUX_VAL(CP(ETK_D9_ES2),		(IEN  | PTU | DIS | M3)) /*HSUSB1_NXT*/\
+	MUX_VAL(CP(D2D_MCAD1),		(IEN  | PTD | EN  | M0)) /*d2d_mcad1*/\
+	MUX_VAL(CP(D2D_MCAD2),		(IEN  | PTD | EN  | M0)) /*d2d_mcad2*/\
+	MUX_VAL(CP(D2D_MCAD3),		(IEN  | PTD | EN  | M0)) /*d2d_mcad3*/\
+	MUX_VAL(CP(D2D_MCAD4),		(IEN  | PTD | EN  | M0)) /*d2d_mcad4*/\
+	MUX_VAL(CP(D2D_MCAD5),		(IEN  | PTD | EN  | M0)) /*d2d_mcad5*/\
+	MUX_VAL(CP(D2D_MCAD6),		(IEN  | PTD | EN  | M0)) /*d2d_mcad6*/\
+	MUX_VAL(CP(D2D_MCAD7),		(IEN  | PTD | EN  | M0)) /*d2d_mcad7*/\
+	MUX_VAL(CP(D2D_MCAD8),		(IEN  | PTD | EN  | M0)) /*d2d_mcad8*/\
+	MUX_VAL(CP(D2D_MCAD9),		(IEN  | PTD | EN  | M0)) /*d2d_mcad9*/\
+	MUX_VAL(CP(D2D_MCAD10),		(IEN  | PTD | EN  | M0)) /*d2d_mcad10*/\
+	MUX_VAL(CP(D2D_MCAD11),		(IEN  | PTD | EN  | M0)) /*d2d_mcad11*/\
+	MUX_VAL(CP(D2D_MCAD12),		(IEN  | PTD | EN  | M0)) /*d2d_mcad12*/\
+	MUX_VAL(CP(D2D_MCAD13),		(IEN  | PTD | EN  | M0)) /*d2d_mcad13*/\
+	MUX_VAL(CP(D2D_MCAD14),		(IEN  | PTD | EN  | M0)) /*d2d_mcad14*/\
+	MUX_VAL(CP(D2D_MCAD15),		(IEN  | PTD | EN  | M0)) /*d2d_mcad15*/\
+	MUX_VAL(CP(D2D_MCAD16),		(IEN  | PTD | EN  | M0)) /*d2d_mcad16*/\
+	MUX_VAL(CP(D2D_MCAD17),		(IEN  | PTD | EN  | M0)) /*d2d_mcad17*/\
+	MUX_VAL(CP(D2D_MCAD18),		(IEN  | PTD | EN  | M0)) /*d2d_mcad18*/\
+	MUX_VAL(CP(D2D_MCAD19),		(IEN  | PTD | EN  | M0)) /*d2d_mcad19*/\
+	MUX_VAL(CP(D2D_MCAD20),		(IEN  | PTD | EN  | M0)) /*d2d_mcad20*/\
+	MUX_VAL(CP(D2D_MCAD21),		(IEN  | PTD | EN  | M0)) /*d2d_mcad21*/\
+	MUX_VAL(CP(D2D_MCAD22),		(IEN  | PTD | EN  | M0)) /*d2d_mcad22*/\
+	MUX_VAL(CP(D2D_MCAD23),		(IEN  | PTD | EN  | M0)) /*d2d_mcad23*/\
+	MUX_VAL(CP(D2D_MCAD24),		(IEN  | PTD | EN  | M0)) /*d2d_mcad24*/\
+	MUX_VAL(CP(D2D_MCAD25),		(IEN  | PTD | EN  | M0)) /*d2d_mcad25*/\
+	MUX_VAL(CP(D2D_MCAD26),		(IEN  | PTD | EN  | M0)) /*d2d_mcad26*/\
+	MUX_VAL(CP(D2D_MCAD27),		(IEN  | PTD | EN  | M0)) /*d2d_mcad27*/\
+	MUX_VAL(CP(D2D_MCAD28),		(IEN  | PTD | EN  | M0)) /*d2d_mcad28*/\
+	MUX_VAL(CP(D2D_MCAD29),		(IEN  | PTD | EN  | M0)) /*d2d_mcad29*/\
+	MUX_VAL(CP(D2D_MCAD30),		(IEN  | PTD | EN  | M0)) /*d2d_mcad30*/\
+	MUX_VAL(CP(D2D_MCAD31),		(IEN  | PTD | EN  | M0)) /*d2d_mcad31*/\
+	MUX_VAL(CP(D2D_MCAD32),		(IEN  | PTD | EN  | M0)) /*d2d_mcad32*/\
+	MUX_VAL(CP(D2D_MCAD33),		(IEN  | PTD | EN  | M0)) /*d2d_mcad33*/\
+	MUX_VAL(CP(D2D_MCAD34),		(IEN  | PTD | EN  | M0)) /*d2d_mcad34*/\
+	MUX_VAL(CP(D2D_MCAD35),		(IEN  | PTD | EN  | M0)) /*d2d_mcad35*/\
+	MUX_VAL(CP(D2D_MCAD36),		(IEN  | PTD | EN  | M0)) /*d2d_mcad36*/\
+	MUX_VAL(CP(D2D_CLK26MI),	(IEN  | PTD | DIS | M0)) /*d2d_clk26m*/\
+	MUX_VAL(CP(D2D_NRESPWRON),	(IEN  | PTD | EN  | M0)) /*d2d_nrespw*/\
+	MUX_VAL(CP(D2D_NRESWARM),	(IEN  | PTU | EN  | M0)) /*d2d_nreswa*/\
+	MUX_VAL(CP(D2D_ARM9NIRQ),	(IEN  | PTD | DIS | M0)) /*d2d_arm9ni*/\
+	MUX_VAL(CP(D2D_UMA2P6FIQ),	(IEN  | PTD | DIS | M0)) /*d2d_uma2p6*/\
+	MUX_VAL(CP(D2D_SPINT),		(IEN  | PTD | EN  | M0)) /*d2d_spint*/\
+	MUX_VAL(CP(D2D_FRINT),		(IEN  | PTD | EN  | M0)) /*d2d_frint*/\
+	MUX_VAL(CP(D2D_DMAREQ0),	(IEN  | PTD | DIS | M0)) /*d2d_dmare0*/\
+	MUX_VAL(CP(D2D_DMAREQ1),	(IEN  | PTD | DIS | M0)) /*d2d_dmare1*/\
+	MUX_VAL(CP(D2D_DMAREQ2),	(IEN  | PTD | DIS | M0)) /*d2d_dmare2*/\
+	MUX_VAL(CP(D2D_DMAREQ3),	(IEN  | PTD | DIS | M0)) /*d2d_dmare3*/\
+	MUX_VAL(CP(D2D_N3GTRST),	(IEN  | PTD | DIS | M0)) /*d2d_n3gtrs*/\
+	MUX_VAL(CP(D2D_N3GTDI),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtdi*/\
+	MUX_VAL(CP(D2D_N3GTDO),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtdo*/\
+	MUX_VAL(CP(D2D_N3GTMS),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtms*/\
+	MUX_VAL(CP(D2D_N3GTCK),		(IEN  | PTD | DIS | M0)) /*d2d_n3gtck*/\
+	MUX_VAL(CP(D2D_N3GRTCK),	(IEN  | PTD | DIS | M0)) /*d2d_n3grtc*/\
+	MUX_VAL(CP(D2D_MSTDBY),		(IEN  | PTU | EN  | M0)) /*d2d_mstdby*/\
+	MUX_VAL(CP(D2D_SWAKEUP),	(IEN  | PTD | EN  | M0)) /*d2d_swakeu*/\
+	MUX_VAL(CP(D2D_IDLEREQ),	(IEN  | PTD | DIS | M0)) /*d2d_idlere*/\
+	MUX_VAL(CP(D2D_IDLEACK),	(IEN  | PTU | EN  | M0)) /*d2d_idleac*/\
+	MUX_VAL(CP(D2D_MWRITE),		(IEN  | PTD | DIS | M0)) /*d2d_mwrite*/\
+	MUX_VAL(CP(D2D_SWRITE),		(IEN  | PTD | DIS | M0)) /*d2d_swrite*/\
+	MUX_VAL(CP(D2D_MREAD),		(IEN  | PTD | DIS | M0)) /*d2d_mread*/\
+	MUX_VAL(CP(D2D_SREAD),		(IEN  | PTD | DIS | M0)) /*d2d_sread*/\
+	MUX_VAL(CP(D2D_MBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_mbusfl*/\
+	MUX_VAL(CP(D2D_SBUSFLAG),	(IEN  | PTD | DIS | M0)) /*d2d_sbusfl*/\
+	MUX_VAL(CP(SDRC_CKE0),		(IDIS | PTU | EN  | M0)) /*sdrc_cke0*/\
+	MUX_VAL(CP(SDRC_CKE1),		(IDIS | PTU | EN  | M0)) /*sdrc_cke1*/
+
+#define MUX_RX51_C() \
+	MUX_VAL(CP(MCBSP3_DX),		(IEN | PTD | DIS | M4)) /*GPIO_140*/\
+	MUX_VAL(CP(MCBSP3_DR),		(IEN | PTD | DIS | M4)) /*GPIO_142*/\
+	MUX_VAL(CP(MCBSP3_CLKX),	(IEN | PTD | DIS | M4)) /*GPIO_141*/\
+	MUX_VAL(CP(UART2_CTS),		(IEN  | PTU | EN  | M0)) /*UART2_CTS*/\
+	MUX_VAL(CP(UART2_RTS),		(IDIS | PTD | DIS | M0)) /*UART2_RTS*/\
+	MUX_VAL(CP(UART2_TX),		(IDIS | PTD | DIS | M0)) /*UART2_TX*/
+
+#endif
diff --git a/board/nokia/rx51/tag_omap.h b/board/nokia/rx51/tag_omap.h
new file mode 100644
index 0000000..60fa26f
--- /dev/null
+++ b/board/nokia/rx51/tag_omap.h
@@ -0,0 +1,311 @@
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2011
+ * marcel@mesa.nl, Mesa Consulting B.V.
+ *
+ * (C) Copyright 2004-2005
+ * Nokia Corporation
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+
+/*
+ *  Code copied from maemo kernel 2.6.28 file
+ *  arch/arm/plat-omap/include/mach/board.h
+ *
+ *  Information structures for board-specific data
+ *
+ *  Copyright (C) 2004	Nokia Corporation
+ *  Written by Juha Yrjölä <juha.yrjola@nokia.com>
+ */
+
+/* Different peripheral ids */
+#define OMAP_TAG_CLOCK		0x4f01
+#define OMAP_TAG_SERIAL_CONSOLE	0x4f03
+#define OMAP_TAG_USB		0x4f04
+#define OMAP_TAG_LCD		0x4f05
+#define OMAP_TAG_GPIO_SWITCH	0x4f06
+#define OMAP_TAG_UART		0x4f07
+#define OMAP_TAG_FBMEM		0x4f08
+#define OMAP_TAG_STI_CONSOLE	0x4f09
+#define OMAP_TAG_CAMERA_SENSOR	0x4f0a
+#define OMAP_TAG_PARTITION	0x4f0b
+#define OMAP_TAG_TEA5761	0x4f10
+#define OMAP_TAG_TMP105		0x4f11
+
+#define OMAP_TAG_BOOT_REASON	0x4f80
+#define OMAP_TAG_FLASH_PART_STR	0x4f81
+#define OMAP_TAG_VERSION_STR	0x4f82
+
+#define OMAP_TAG_NOKIA_BT	0x4e01
+#define OMAP_TAG_WLAN_CX3110X	0x4e02
+#define OMAP_TAG_CBUS		0x4e03
+#define OMAP_TAG_EM_ASIC_BB5	0x4e04
+
+
+struct omap_clock_config {
+	/* 0 for 12 MHz, 1 for 13 MHz and 2 for 19.2 MHz */
+	u8 system_clock_type;
+};
+
+struct omap_serial_console_config {
+	u8 console_uart;
+	u32 console_speed;
+};
+
+struct omap_sti_console_config {
+	unsigned enable:1;
+	u8 channel;
+};
+
+struct omap_usb_config {
+	/* Configure drivers according to the connectors on your board:
+	 *  - "A" connector (rectagular)
+	 *	... for host/OHCI use, set "register_host".
+	 *  - "B" connector (squarish) or "Mini-B"
+	 *	... for device/gadget use, set "register_dev".
+	 *  - "Mini-AB" connector (very similar to Mini-B)
+	 *	... for OTG use as device OR host, initialize "otg"
+	 */
+	unsigned	register_host:1;
+	unsigned	register_dev:1;
+	u8		otg;	/* port number, 1-based:  usb1 == 2 */
+
+	u8		hmc_mode;
+
+	/* implicitly true if otg:  host supports remote wakeup? */
+	u8		rwc;
+
+	/* signaling pins used to talk to transceiver on usbN:
+	 *  0 == usbN unused
+	 *  2 == usb0-only, using internal transceiver
+	 *  3 == 3 wire bidirectional
+	 *  4 == 4 wire bidirectional
+	 *  6 == 6 wire unidirectional (or TLL)
+	 */
+	u8		pins[3];
+};
+
+struct omap_lcd_config {
+	char panel_name[16];
+	char ctrl_name[16];
+	s16  nreset_gpio;
+	u8   data_lines;
+};
+
+struct omap_fbmem_config {
+	u32 start;
+	u32 size;
+};
+
+struct omap_gpio_switch_config {
+	char name[12];
+	u16 gpio;
+	u8 flags:4;
+	u8 type:4;
+	unsigned int key_code:24; /* Linux key code */
+};
+
+struct omap_uart_config {
+	/* Bit field of UARTs present; bit 0 --> UART1 */
+	unsigned int enabled_uarts;
+};
+
+struct omap_tea5761_config {
+	u16 enable_gpio;
+};
+
+struct omap_partition_config {
+	char name[16];
+	unsigned int size;
+	unsigned int offset;
+	/* same as in include/linux/mtd/partitions.h */
+	unsigned int mask_flags;
+};
+
+struct omap_flash_part_str_config {
+	char part_table[0];
+};
+
+struct omap_boot_reason_config {
+	char reason_str[12];
+};
+
+struct omap_version_config {
+	char component[12];
+	char version[12];
+};
+
+/*
+ *  Code copied from maemo kernel 2.6.28 file
+ *  arch/arm/plat-omap/include/mach/board-nokia.h
+ *
+ *  Information structures for Nokia-specific board config data
+ *
+ *  Copyright (C) 2005  Nokia Corporation
+ */
+
+struct omap_bluetooth_config {
+	u8 chip_type;
+	u8 bt_wakeup_gpio;
+	u8 host_wakeup_gpio;
+	u8 reset_gpio;
+	u8 bt_uart;
+	u8 bd_addr[6];
+	u8 bt_sysclk;
+};
+
+struct omap_wlan_cx3110x_config {
+	u8 chip_type;
+	u8 reserverd;
+	s16 power_gpio;
+	s16 irq_gpio;
+	s16 spi_cs_gpio;
+};
+
+struct omap_cbus_config {
+	s16 clk_gpio;
+	s16 dat_gpio;
+	s16 sel_gpio;
+};
+
+struct omap_em_asic_bb5_config {
+	s16 retu_irq_gpio;
+	s16 tahvo_irq_gpio;
+};
+
+/*
+ *  omap_tag handling
+ *
+ *  processing omap tag structures
+ *
+ *  Copyright (C) 2011  marcel@mesa.nl, Mesa Consulting B.V.
+ *  Copyright (C) 2012  Pali Rohár <pali.rohar@gmail.com>
+ */
+
+/* TI OMAP specific information */
+#define ATAG_BOARD	0x414f4d50
+
+struct tag_omap_header {
+	u16 tag;
+	u16 size;
+};
+
+struct tag_omap {
+	struct tag_omap_header hdr;
+	union {
+		struct omap_clock_config clock;
+		struct omap_serial_console_config serial_console;
+		struct omap_sti_console_config sti_console;
+		struct omap_usb_config usb;
+		struct omap_lcd_config lcd;
+		struct omap_fbmem_config fbmem;
+		struct omap_gpio_switch_config gpio_switch;
+		struct omap_uart_config uart;
+		struct omap_tea5761_config tea5761;
+		struct omap_partition_config partition;
+		struct omap_flash_part_str_config flash_part_str;
+		struct omap_boot_reason_config boot_reason;
+		struct omap_version_config version;
+		struct omap_bluetooth_config bluetooth;
+		struct omap_wlan_cx3110x_config wlan_cx3110x;
+		struct omap_cbus_config cbus;
+		struct omap_em_asic_bb5_config em_asic_bb5;
+	} u;
+};
+
+#define tag_omap_next(t)	((struct tag_omap *)((u8 *)(t) + \
+				(t)->hdr.size + sizeof(struct tag_omap_header)))
+
+#define OMAP_TAG_HEADER_CONFIG(config, type) \
+	.hdr.tag = config, \
+	.hdr.size = sizeof(struct type)
+
+#define OMAP_TAG_UART_CONFIG(p1) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_UART, omap_uart_config), \
+		.u.uart.enabled_uarts = p1, \
+	}
+
+#define OMAP_TAG_SERIAL_CONSOLE_CONFIG(p1, p2) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_SERIAL_CONSOLE, \
+			omap_serial_console_config), \
+		.u.serial_console.console_uart = p1, \
+		.u.serial_console.console_speed = p2, \
+	}
+
+#define OMAP_TAG_LCD_CONFIG(p1, p2, p3, p4) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_LCD, omap_lcd_config), \
+		.u.lcd.panel_name = p1, \
+		.u.lcd.ctrl_name = p2, \
+		.u.lcd.nreset_gpio = p3, \
+		.u.lcd.data_lines = p4, \
+	}
+
+#define OMAP_TAG_GPIO_SWITCH_CONFIG(p1, p2, p3, p4, p5) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_GPIO_SWITCH, \
+			omap_gpio_switch_config), \
+		.u.gpio_switch.name = p1, \
+		.u.gpio_switch.gpio = p2, \
+		.u.gpio_switch.flags = p3, \
+		.u.gpio_switch.type = p4, \
+		.u.gpio_switch.key_code = p5, \
+	}
+
+#define OMAP_TAG_WLAN_CX3110X_CONFIG(p1, p2, p3, p4, p5) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_WLAN_CX3110X, \
+			omap_wlan_cx3110x_config), \
+		.u.wlan_cx3110x.chip_type = p1, \
+		.u.wlan_cx3110x.reserverd = p2, \
+		.u.wlan_cx3110x.power_gpio = p3, \
+		.u.wlan_cx3110x.irq_gpio = p4, \
+		.u.wlan_cx3110x.spi_cs_gpio = p5, \
+	}
+
+#define OMAP_TAG_PARTITION_CONFIG(p1, p2, p3, p4) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_PARTITION, \
+			omap_partition_config), \
+		.u.partition.name = p1, \
+		.u.partition.size = p2, \
+		.u.partition.offset = p3, \
+		.u.partition.mask_flags = p4, \
+	}
+
+#define OMAP_TAG_BOOT_REASON_CONFIG(p1) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_BOOT_REASON, \
+			omap_boot_reason_config), \
+		.u.boot_reason.reason_str = p1, \
+	}
+
+#define OMAP_TAG_VERSION_STR_CONFIG(p1, p2) \
+	{ \
+		OMAP_TAG_HEADER_CONFIG(OMAP_TAG_VERSION_STR, \
+			omap_version_config), \
+		.u.version.component = p1, \
+		.u.version.version = p2, \
+	}
diff --git a/board/nvidia/common/Makefile b/board/nvidia/common/Makefile
index a93d458..f6f419e 100644
--- a/board/nvidia/common/Makefile
+++ b/board/nvidia/common/Makefile
@@ -25,9 +25,7 @@
 
 LIB	= $(obj)lib$(VENDOR).o
 
-COBJS-y += board.o
-COBJS-$(CONFIG_SPI_UART_SWITCH) += uart-spi-switch.o
-COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o
+include common.mk
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/board/nvidia/common/common.mk b/board/nvidia/common/common.mk
new file mode 100644
index 0000000..bd6202c
--- /dev/null
+++ b/board/nvidia/common/common.mk
@@ -0,0 +1,4 @@
+# common options for all tegra boards
+COBJS-y	+= ../../nvidia/common/board.o
+COBJS-$(CONFIG_SPI_UART_SWITCH) += ../../nvidia/common/uart-spi-switch.o
+COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += ../../nvidia/common/emc.o
diff --git a/board/nvidia/dts/tegra20-harmony.dts b/board/nvidia/dts/tegra20-harmony.dts
index ca5facb..5645a8d 100644
--- a/board/nvidia/dts/tegra20-harmony.dts
+++ b/board/nvidia/dts/tegra20-harmony.dts
@@ -8,6 +8,7 @@
 
 	aliases {
 		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5004000";
 	};
 
 	memory {
@@ -52,7 +53,7 @@
 	};
 
 	usb@c5004000 {
-		status = "disabled";
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* gpio PV1 */
 	};
 
 	nand-controller@70008000 {
diff --git a/board/nvidia/dts/tegra20-whistler.dts b/board/nvidia/dts/tegra20-whistler.dts
index 38599bd..f830cf3 100644
--- a/board/nvidia/dts/tegra20-whistler.dts
+++ b/board/nvidia/dts/tegra20-whistler.dts
@@ -9,7 +9,6 @@
 	aliases {
 		i2c0 = "/i2c@7000d000";
 		usb0 = "/usb@c5008000";
-		usb1 = "/usb@c5000000";
 	};
 
 	memory {
@@ -61,6 +60,10 @@
 		};
 	};
 
+	usb@c5000000 {
+		status = "disabled";
+	};
+
 	usb@c5004000 {
 		status = "disabled";
 	};
diff --git a/board/nvidia/harmony/harmony.c b/board/nvidia/harmony/harmony.c
index 32ed9bb..c7590ac 100644
--- a/board/nvidia/harmony/harmony.c
+++ b/board/nvidia/harmony/harmony.c
@@ -75,3 +75,12 @@
 	return 0;
 }
 #endif
+
+void pin_mux_usb(void)
+{
+	funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
+	pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
+	pinmux_tristate_disable(PINGRP_CDEV2);
+	/* USB2 PHY reset GPIO */
+	pinmux_tristate_disable(PINGRP_UAC);
+}
diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 4e8a183..c412c07 100644
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -26,6 +26,7 @@
 #include <asm/arch/tegra.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/funcmux.h>
+#include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
 #include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
@@ -34,23 +35,14 @@
 #endif
 
 /* TODO: Remove this code when the SPI switch is working */
-#ifndef CONFIG_SPI_UART_SWITCH
-/*
- * Routine: gpio_config_uart_seaboard
- * Description: Force GPIO_PI3 low on Seaboard so UART4 works.
- */
-static void gpio_config_uart_seaboard(void)
-{
-	/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
-	gpio_request(GPIO_PI3, NULL);
-	gpio_direction_output(GPIO_PI3, 0);
-}
-
+#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
 void gpio_early_init_uart(void)
 {
-	if (machine_is_ventana())
-		return;
-	gpio_config_uart_seaboard();
+	/* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
+#ifndef CONFIG_SPL_BUILD
+	gpio_request(GPIO_PI3, NULL);
+#endif
+	gpio_direction_output(GPIO_PI3, 0);
 }
 #endif
 
diff --git a/board/nx823/u-boot.lds b/board/nx823/u-boot.lds
index fd4e8a5..c8d3894 100644
--- a/board/nx823/u-boot.lds
+++ b/board/nx823/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/nx823/u-boot.lds.debug b/board/nx823/u-boot.lds.debug
index c771102..92796e6 100644
--- a/board/nx823/u-boot.lds.debug
+++ b/board/nx823/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/openrisc/openrisc-generic/u-boot.lds b/board/openrisc/openrisc-generic/u-boot.lds
index 1aed197..4cffacb 100644
--- a/board/openrisc/openrisc-generic/u-boot.lds
+++ b/board/openrisc/openrisc-generic/u-boot.lds
@@ -26,9 +26,11 @@
 		_endtext = .;
 	}  > ram
 
-	 __u_boot_cmd_start = .;
-	 .u_boot_cmd : { *(.u_boot_cmd) } > ram
-	 __u_boot_cmd_end = .;
+
+	 . = ALIGN(4);
+	 .u_boot_list : {
+	#include <u-boot.lst>
+	 }
 
 	.rodata : {
 		*(.rodata);
diff --git a/board/palmtc/palmtc.c b/board/palmtc/palmtc.c
index b23eec8..590ca41 100644
--- a/board/palmtc/palmtc.c
+++ b/board/palmtc/palmtc.c
@@ -24,6 +24,7 @@
 #include <serial.h>
 #include <asm/io.h>
 #include <asm/arch/pxa.h>
+#include <asm/arch/regs-mmc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -51,6 +52,14 @@
 	return 0;
 }
 
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+	pxa_mmc_register(0);
+	return 0;
+}
+#endif
+
 int dram_init(void)
 {
 	pxa2xx_dram_init();
diff --git a/board/pb1x00/u-boot.lds b/board/pb1x00/u-boot.lds
index bd0dee1..07ddd36 100644
--- a/board/pb1x00/u-boot.lds
+++ b/board/pb1x00/u-boot.lds
@@ -54,10 +54,9 @@
 
 	.sdata  : { *(.sdata*) }
 
-	.u_boot_cmd : {
-	  __u_boot_cmd_start = .;
-	  *(.u_boot_cmd)
-	  __u_boot_cmd_end = .;
+	. = ALIGN(4);
+	.u_boot_list : {
+		#include <u-boot.lst>
 	}
 
 	uboot_end_data = .;
diff --git a/board/pcippc2/fpga_serial.c b/board/pcippc2/fpga_serial.c
index 5f89d9b..de61ca0 100644
--- a/board/pcippc2/fpga_serial.c
+++ b/board/pcippc2/fpga_serial.c
@@ -73,13 +73,6 @@
 	}
 }
 
-void fpga_serial_puts (const char *s)
-{
-	while (*s) {
-		fpga_serial_print (*s++);
-	}
-}
-
 int fpga_serial_getc (void)
 {
 	while ((in8 (UART (LSR)) & 0x01) == 0);
diff --git a/board/pcippc2/fpga_serial.h b/board/pcippc2/fpga_serial.h
index 5275014..106fbf7 100644
--- a/board/pcippc2/fpga_serial.h
+++ b/board/pcippc2/fpga_serial.h
@@ -26,7 +26,6 @@
 
 extern void	fpga_serial_init	(int);
 extern void	fpga_serial_putc	(char);
-extern void	fpga_serial_puts	(const char *);
 extern int	fpga_serial_getc	(void);
 extern int	fpga_serial_tstc	(void);
 extern void	fpga_serial_setbrg	(void);
diff --git a/board/pcippc2/pcippc2.c b/board/pcippc2/pcippc2.c
index 4a91458..5e6fc58 100644
--- a/board/pcippc2/pcippc2.c
+++ b/board/pcippc2/pcippc2.c
@@ -29,6 +29,7 @@
 #include <watchdog.h>
 #include <pci.h>
 #include <netdev.h>
+#include <serial.h>
 
 #include "hardware.h"
 #include "pcippc2.h"
@@ -129,7 +130,7 @@
 	fpga_serial_init (sconsole_get_baudrate ());
 
 	sconsole_putc   = fpga_serial_putc;
-	sconsole_puts   = fpga_serial_puts;
+	sconsole_puts   = default_serial_puts;
 	sconsole_getc   = fpga_serial_getc;
 	sconsole_tstc   = fpga_serial_tstc;
 	sconsole_setbrg = fpga_serial_setbrg;
diff --git a/board/pcs440ep/pcs440ep.c b/board/pcs440ep/pcs440ep.c
index 746a54c..f8345dd 100644
--- a/board/pcs440ep/pcs440ep.c
+++ b/board/pcs440ep/pcs440ep.c
@@ -32,6 +32,7 @@
 #include <sha1.h>
 #include <asm/io.h>
 #include <net.h>
+#include <ata.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -672,7 +673,6 @@
  * ( bus per_addr 20 -30 is connectsd on CF bus A10-A0)
  * These values are shifted
  */
-extern ulong *ide_bus_offset;
 void inline ide_outb(int dev, int port, unsigned char val)
 {
 	debug ("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
@@ -714,3 +714,58 @@
 	udelay (10000);
 }
 #endif /* defined (CONFIG_CMD_IDE) && defined (CONFIG_IDE_RESET) */
+
+
+/* this is motly the same as it should, causing a little code duplication */
+#if defined(CONFIG_CMD_IDE)
+#define EIEIO		__asm__ volatile ("eieio")
+
+void ide_input_swap_data(int dev, ulong *sect_buf, int words)
+{
+	volatile ushort *pbuf =
+		(ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
+	ushort *dbuf = (ushort *) sect_buf;
+
+	debug("in input swap data base for read is %lx\n",
+		(unsigned long) pbuf);
+
+	while (words--) {
+		*dbuf++ = *pbuf;
+		*dbuf++ = *pbuf;
+	}
+}
+
+void ide_output_data(int dev, const ulong *sect_buf, int words)
+{
+	ushort *dbuf;
+	volatile ushort *pbuf;
+
+	pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
+	dbuf = (ushort *) sect_buf;
+	while (words--) {
+		EIEIO;
+		*pbuf = ld_le16(dbuf++);
+		EIEIO;
+		*pbuf = ld_le16(dbuf++);
+	}
+}
+
+void ide_input_data(int dev, ulong *sect_buf, int words)
+{
+	ushort *dbuf;
+	volatile ushort *pbuf;
+
+	pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
+	dbuf = (ushort *) sect_buf;
+
+	debug("in input data base for read is %lx\n", (unsigned long) pbuf);
+
+	while (words--) {
+		EIEIO;
+		*dbuf++ = ld_le16(pbuf);
+		EIEIO;
+		*dbuf++ = ld_le16(pbuf);
+	}
+}
+
+#endif
diff --git a/board/prodrive/p3mx/serial.c b/board/prodrive/p3mx/serial.c
index 2f4d294..3536933 100644
--- a/board/prodrive/p3mx/serial.c
+++ b/board/prodrive/p3mx/serial.c
@@ -75,21 +75,13 @@
 	galbrg_set_baudrate (CONFIG_MPSC_PORT, gd->baudrate);
 }
 
-
-static void p3mx_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device p3mx_serial_drv = {
 	.name	= "p3mx_serial",
 	.start	= p3mx_serial_init,
 	.stop	= NULL,
 	.setbrg	= p3mx_serial_setbrg,
 	.putc	= p3mx_serial_putc,
-	.puts	= p3mx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= p3mx_serial_getc,
 	.tstc	= p3mx_serial_tstc,
 };
diff --git a/board/pxa255_idp/pxa_idp.c b/board/pxa255_idp/pxa_idp.c
index 877e8d9..9931efd 100644
--- a/board/pxa255_idp/pxa_idp.c
+++ b/board/pxa255_idp/pxa_idp.c
@@ -35,6 +35,7 @@
 #include <command.h>
 #include <asm/io.h>
 #include <asm/arch/pxa.h>
+#include <asm/arch/regs-mmc.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -77,6 +78,14 @@
 	return 0;
 }
 
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+	pxa_mmc_register(0);
+	return 0;
+}
+#endif
+
 int board_late_init(void)
 {
 	setenv("stdout", "serial");
diff --git a/board/qemu-mips/config.mk b/board/qemu-mips/config.mk
deleted file mode 100644
index 27cd34a..0000000
--- a/board/qemu-mips/config.mk
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# Qemu -M mips system emulator
-# See http://fabrice.bellard.free.fr/qemu
-#
-
-# ROM version
-CONFIG_SYS_TEXT_BASE = 0xbfc00000
-
-# RAM version
-#CONFIG_SYS_TEXT_BASE = 0x80001000
diff --git a/board/qemu-mips/u-boot.lds b/board/qemu-mips/u-boot.lds
index 9460b20..cb2356f 100644
--- a/board/qemu-mips/u-boot.lds
+++ b/board/qemu-mips/u-boot.lds
@@ -24,7 +24,11 @@
 /*
 OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
 */
+#if defined(CONFIG_64BIT)
+OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips", "elf64-tradlittlemips")
+#else
 OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradlittlemips")
+#endif
 OUTPUT_ARCH(mips)
 ENTRY(_start)
 SECTIONS
@@ -55,15 +59,17 @@
 	. = ALIGN(4);
 	.sdata  : { *(.sdata*) }
 
-	. = .;
-	.u_boot_cmd : {
-	__u_boot_cmd_start = .;
-	*(.u_boot_cmd)
-	__u_boot_cmd_end = .;
+	. = ALIGN(4);
+	.u_boot_list : {
+		#include <u-boot.lst>
 	}
 
 	uboot_end_data = .;
+#if defined(CONFIG_64BIT)
+	num_got_entries = (__got_end - __got_start) >> 3;
+#else
 	num_got_entries = (__got_end - __got_start) >> 2;
+#endif
 
 	. = ALIGN(4);
 	.sbss  : { *(.sbss*) }
diff --git a/board/qi/qi_lb60/u-boot.lds b/board/qi/qi_lb60/u-boot.lds
index 7317652..b3cb869 100644
--- a/board/qi/qi_lb60/u-boot.lds
+++ b/board/qi/qi_lb60/u-boot.lds
@@ -47,9 +47,11 @@
 
 	.sdata  : { *(.sdata*) }
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	uboot_end_data = .;
 	num_got_entries = (__got_end - __got_start) >> 2;
diff --git a/board/quantum/u-boot.lds b/board/quantum/u-boot.lds
index d0b60cf..18f962c 100644
--- a/board/quantum/u-boot.lds
+++ b/board/quantum/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/r360mpi/u-boot.lds b/board/r360mpi/u-boot.lds
index 2fa085a..3ef0d9e 100644
--- a/board/r360mpi/u-boot.lds
+++ b/board/r360mpi/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/rbc823/u-boot.lds b/board/rbc823/u-boot.lds
index d943fb6..a86b568 100644
--- a/board/rbc823/u-boot.lds
+++ b/board/rbc823/u-boot.lds
@@ -77,9 +77,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
   . = .;
   __start___ex_table = .;
diff --git a/board/renesas/sh7757lcr/u-boot.lds b/board/renesas/sh7757lcr/u-boot.lds
index 38ebe88..cf406ce 100644
--- a/board/renesas/sh7757lcr/u-boot.lds
+++ b/board/renesas/sh7757lcr/u-boot.lds
@@ -77,13 +77,10 @@
 	}
 	PROVIDE (_egot = .);
 
-	PROVIDE (__u_boot_cmd_start = .);
-	.u_boot_cmd :
-	{
-		*(.u_boot_cmd)
-		. = ALIGN(4);
+
+	.u_boot_list : {
+		#include <u-boot.lst>
 	}
-	PROVIDE (__u_boot_cmd_end = .);
 
 	PROVIDE (reloc_dst_end = .);
 	/* _reloc_dst_end = .; */
diff --git a/board/rsdproto/u-boot.lds b/board/rsdproto/u-boot.lds
index a729c52..ff95029 100644
--- a/board/rsdproto/u-boot.lds
+++ b/board/rsdproto/u-boot.lds
@@ -97,9 +97,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/samsung/origen/lowlevel_init.S b/board/samsung/origen/lowlevel_init.S
index 9283201..9daa0da 100644
--- a/board/samsung/origen/lowlevel_init.S
+++ b/board/samsung/origen/lowlevel_init.S
@@ -158,7 +158,22 @@
 	ldr	r2, =CLK_SRC_PERIL0_OFFSET
 	str	r1, [r0, r2]
 
-	/* FIMD0 */
+	/* CAM , FIMC 0-3 */
+	ldr	r1, =CLK_SRC_CAM_VAL
+	ldr	r2, =CLK_SRC_CAM_OFFSET
+	str	r1, [r0, r2]
+
+	/* MFC */
+	ldr	r1, =CLK_SRC_MFC_VAL
+	ldr	r2, =CLK_SRC_MFC_OFFSET
+	str	r1, [r0, r2]
+
+	/* G3D */
+	ldr	r1, =CLK_SRC_G3D_VAL
+	ldr	r2, =CLK_SRC_G3D_OFFSET
+	str	r1, [r0, r2]
+
+	/* LCD0 */
 	ldr	r1, =CLK_SRC_LCD0_VAL
 	ldr	r2, =CLK_SRC_LCD0_OFFSET
 	str	r1, [r0, r2]
@@ -223,6 +238,26 @@
 	ldr	r2, =CLK_DIV_PERIL0_OFFSET
 	str	r1, [r0, r2]
 
+	/* CAM, FIMC 0-3: CAM Clock Divisors */
+	ldr	r1, =CLK_DIV_CAM_VAL
+	ldr	r2, =CLK_DIV_CAM_OFFSET
+	str	r1, [r0, r2]
+
+	/* CLK_DIV_MFC: MFC Clock Divisors */
+	ldr	r1, =CLK_DIV_MFC_VAL
+	ldr	r2, =CLK_DIV_MFC_OFFSET
+	str	r1, [r0, r2]
+
+	/* CLK_DIV_G3D: G3D Clock Divisors */
+	ldr	r1, =CLK_DIV_G3D_VAL
+	ldr	r2, =CLK_DIV_G3D_OFFSET
+	str	r1, [r0, r2]
+
+	/* CLK_DIV_LCD0: LCD0 Clock Divisors */
+	ldr	r1, =CLK_DIV_LCD0_VAL
+	ldr	r2, =CLK_DIV_LCD0_OFFSET
+	str	r1, [r0, r2]
+
 	/* Set PLL locktime */
 	ldr	r1, =PLL_LOCKTIME
 	ldr	r2, =APLL_LOCK_OFFSET
diff --git a/board/samsung/origen/origen_setup.h b/board/samsung/origen/origen_setup.h
index 94cccca..930b948 100644
--- a/board/samsung/origen/origen_setup.h
+++ b/board/samsung/origen/origen_setup.h
@@ -53,7 +53,18 @@
 #define CLK_DIV_FSYS2_OFFSET	0xC548
 #define CLK_DIV_FSYS3_OFFSET	0xC54C
 
+#define CLK_SRC_CAM_OFFSET	0xC220
+#define CLK_SRC_TV_OFFSET	0xC224
+#define CLK_SRC_MFC_OFFSET	0xC228
+#define CLK_SRC_G3D_OFFSET	0xC22C
+#define CLK_SRC_LCD0_OFFSET	0xC234
 #define CLK_SRC_PERIL0_OFFSET	0xC250
+
+#define CLK_DIV_CAM_OFFSET	0xC520
+#define CLK_DIV_TV_OFFSET	0xC524
+#define CLK_DIV_MFC_OFFSET	0xC528
+#define CLK_DIV_G3D_OFFSET	0xC52C
+#define CLK_DIV_LCD0_OFFSET	0xC534
 #define CLK_DIV_PERIL0_OFFSET	0xC550
 
 #define CLK_SRC_LCD0_OFFSET	0xC234
@@ -353,6 +364,65 @@
 				| (UART1_RATIO << 4) \
 				| (UART0_RATIO << 0))
 
+/* Clock Source CAM/FIMC */
+/* CLK_SRC_CAM */
+#define CAM0_SEL_XUSBXTI	1
+#define CAM1_SEL_XUSBXTI	1
+#define CSIS0_SEL_XUSBXTI	1
+#define CSIS1_SEL_XUSBXTI	1
+
+#define FIMC_SEL_SCLKMPLL	6
+#define FIMC0_LCLK_SEL		FIMC_SEL_SCLKMPLL
+#define FIMC1_LCLK_SEL		FIMC_SEL_SCLKMPLL
+#define FIMC2_LCLK_SEL		FIMC_SEL_SCLKMPLL
+#define FIMC3_LCLK_SEL		FIMC_SEL_SCLKMPLL
+
+#define CLK_SRC_CAM_VAL		((CSIS1_SEL_XUSBXTI << 28) \
+				| (CSIS0_SEL_XUSBXTI << 24) \
+				| (CAM1_SEL_XUSBXTI << 20) \
+				| (CAM0_SEL_XUSBXTI << 16) \
+				| (FIMC3_LCLK_SEL << 12) \
+				| (FIMC2_LCLK_SEL << 8) \
+				| (FIMC1_LCLK_SEL << 4) \
+				| (FIMC0_LCLK_SEL << 0))
+
+/* SCLK CAM */
+/* CLK_DIV_CAM */
+#define FIMC0_LCLK_RATIO	4
+#define FIMC1_LCLK_RATIO	4
+#define FIMC2_LCLK_RATIO	4
+#define FIMC3_LCLK_RATIO	4
+#define CLK_DIV_CAM_VAL		((FIMC3_LCLK_RATIO << 12) \
+				| (FIMC2_LCLK_RATIO << 8) \
+				| (FIMC1_LCLK_RATIO << 4) \
+				| (FIMC0_LCLK_RATIO << 0))
+
+/* SCLK MFC */
+/* CLK_SRC_MFC */
+#define MFC_SEL_MPLL		0
+#define MOUTMFC_0		0
+#define MFC_SEL			MOUTMFC_0
+#define MFC_0_SEL		MFC_SEL_MPLL
+#define CLK_SRC_MFC_VAL		((MFC_SEL << 8) | (MFC_0_SEL))
+
+
+/* CLK_DIV_MFC */
+#define MFC_RATIO		3
+#define CLK_DIV_MFC_VAL		(MFC_RATIO)
+
+/* SCLK G3D */
+/* CLK_SRC_G3D */
+#define G3D_SEL_MPLL		0
+#define MOUTG3D_0		0
+#define G3D_SEL			MOUTG3D_0
+#define G3D_0_SEL		G3D_SEL_MPLL
+#define CLK_SRC_G3D_VAL		((G3D_SEL << 8) | (G3D_0_SEL))
+
+/* CLK_DIV_G3D */
+#define G3D_RATIO		1
+#define CLK_DIV_G3D_VAL		(G3D_RATIO)
+
+/* SCLK LCD0 */
 /* CLK_SRC_LCD0 */
 #define FIMD_SEL_SCLKMPLL	6
 #define MDNIE0_SEL_XUSBXTI	1
@@ -363,6 +433,10 @@
 				| (MDNIE0_SEL_XUSBXTI << 4) \
 				| (FIMD_SEL_SCLKMPLL << 0))
 
+/* CLK_DIV_LCD0 */
+#define FIMD0_RATIO		4
+#define CLK_DIV_LCD0_VAL	(FIMD0_RATIO)
+
 /* Required period to generate a stable clock output */
 /* PLL_LOCK_TIME */
 #define PLL_LOCKTIME		0x1C20
diff --git a/board/samsung/smdk5250/smdk5250-uboot-spl.lds b/board/samsung/smdk5250/smdk5250-uboot-spl.lds
index d78dd77..951d8ce 100644
--- a/board/samsung/smdk5250/smdk5250-uboot-spl.lds
+++ b/board/samsung/smdk5250/smdk5250-uboot-spl.lds
@@ -48,6 +48,11 @@
 	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
 	. = ALIGN(4);
 
+	.u_boot_list : {
+		#include <u-boot.lst>
+	} >.sram
+	. = ALIGN(4);
+
 	/* Align .machine_param on 256 byte boundary for easier searching */
 	.machine_param ALIGN(0x100) : { *(.machine_param) } >.sram
 	. = ALIGN(4);
diff --git a/board/samsung/smdk6400/u-boot-nand.lds b/board/samsung/smdk6400/u-boot-nand.lds
index f162815..fbb442a 100644
--- a/board/samsung/smdk6400/u-boot-nand.lds
+++ b/board/samsung/smdk6400/u-boot-nand.lds
@@ -47,11 +47,13 @@
 	. = ALIGN(4);
 	.got : { *(.got) }
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
 
-	. = ALIGN(4);
+	. = align(4);
+	.u_boot_list : {
+		#include <u-boot.lst>
+	}
+
+	. = align(4);
 	.mmudata : { *(.mmudata) }
 
 	. = ALIGN(4);
diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug
index 31746e3..7a0757f 100644
--- a/board/sandburst/karef/u-boot.lds.debug
+++ b/board/sandburst/karef/u-boot.lds.debug
@@ -115,9 +115,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug
index 4922bd2..07bd6fe 100644
--- a/board/sandburst/metrobox/u-boot.lds.debug
+++ b/board/sandburst/metrobox/u-boot.lds.debug
@@ -115,9 +115,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/sandpoint/u-boot.lds b/board/sandpoint/u-boot.lds
index e382fd1..ae3afa1 100644
--- a/board/sandpoint/u-boot.lds
+++ b/board/sandpoint/u-boot.lds
@@ -68,9 +68,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/sbc8560/README b/board/sbc8560/README
deleted file mode 100644
index c4b6422..0000000
--- a/board/sbc8560/README
+++ /dev/null
@@ -1,57 +0,0 @@
-The port was tested on Wind River System Sbc8560 board
-<www.windriver.com>. U-Boot was installed on the flash memory of the
-CPU card (no the SODIMM).
-
-NOTE: Please configure uboot compile to the proper PCI frequency and
-setup the appropriate DIP switch settings.
-
-SBC8560 board:
-
-Make sure boards switches are set to their appropriate conditions.
-Refer to the Engineering Reference Guide ERG-00300-002. Of particular
-importance are: 1) the settings for JP4 (JP4 1-3 and 2-4), which
-select the on-board FLASH device (Intel 28F128Jx); 2) The settings
-for the Clock SW9 (33 MHz or 66 MHz).
-
-	Note:	SW9 Settings: 66 MHz
-		4:1 ratio CCB clocks:SYSCLK
-		3:1 ration e500 Core:CCB
-		pos1 - on, pos2 - on, pos3 - off, pos4 - on, pos5 - off, pos6 - on
-	Note:	SW9 Settings: 33 MHz
-		8:1 ratio CCB clocks:SYSCLK
-		3:1 ration e500 Core:CCB
-		pos1 - on, pos2 - on, pos3 - on, pos4 - off, pos5 - off, pos6 - on
-
-
-Flashing the FLASH device with the "Wind River ICE":
-
-1) Properly connect and configure the Wind River ICE to the target
-   JTAG port. This includes running the SBC8560 register script. Make
-   sure target memory can be read and written.
-
-2) Build the u-boot image:
-	make distclean
-	make SBC8560_66_config or SBC8560_33_config
-	make CROSS_COMPILE=.../ELDK3.0/ppc_8xx-/ all
-
-   Note: reference is made to the ELDK3.0 compiler. Further, it seems
-	 the ppc_8xx compiler is required for the 85xx (no 85xx
-	 designated compiler in ELDK3.0)
-
-3) Convert the uboot (.elf) file to a uboot.bin file (using
-   visionClick converter). The bin file should be converted from
-   fffc0000 to ffffffff
-
-4) Setup the Flash Utility (tools menu) for:
-
-   Do a "dc clr" [visionClick] to load the default register settings
-   Determine the clock speed of the PCI bus and set SW9 accordingly
-	Note: the speed of the PCI bus defaults to the slowest PCI card
-   PlayBack the "default" register file for the SBC8560
-   Select the uboot.bin file with zero bias
-   Select the initialize Target prior to programming
-   Select the V28F640Jx (8192 x 8) 1 device FLASH Algorithm
-   Select the erase base address from FFFC0000 to FFFFFFFF
-   Select the start address from 0 with size of 4000
-
-5) Erase and Program
diff --git a/board/sbc8560/ddr.c b/board/sbc8560/ddr.c
deleted file mode 100644
index e9babc6..0000000
--- a/board/sbc8560/ddr.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * Version 2 as published by the Free Software Foundation.
- */
-
-#include <common.h>
-
-#include <asm/fsl_ddr_sdram.h>
-#include <asm/fsl_ddr_dimm_params.h>
-
-void fsl_ddr_board_options(memctl_options_t *popts,
-				dimm_params_t *pdimm,
-				unsigned int ctrl_num)
-{
-	/*
-	 * Factors to consider for CPO:
-	 *	- frequency
-	 *	- ddr1 vs. ddr2
-	 */
-	popts->cpo_override = 0;
-
-	/*
-	 * Factors to consider for write data delay:
-	 *	- number of DIMMs
-	 *
-	 * 1 = 1/4 clock delay
-	 * 2 = 1/2 clock delay
-	 * 3 = 3/4 clock delay
-	 * 4 = 1   clock delay
-	 * 5 = 5/4 clock delay
-	 * 6 = 3/2 clock delay
-	 */
-	popts->write_data_delay = 3;
-
-	/*
-	 * Factors to consider for half-strength driver enable:
-	 *	- number of DIMMs installed
-	 */
-	popts->half_strength_driver_enable = 0;
-}
diff --git a/board/sbc8560/law.c b/board/sbc8560/law.c
deleted file mode 100644
index 4e6baed..0000000
--- a/board/sbc8560/law.c
+++ /dev/null
@@ -1,60 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fsl_law.h>
-#include <asm/mmu.h>
-
-/* LAW(Local Access Window) configuration:
- * 0000_0000-0800_0000: DDR(512M) -or- larger
- * c000_0000-cfff_ffff: PCI(256M)
- * d000_0000-dfff_ffff: RapidIO(256M)
- * e000_0000-ffff_ffff: localbus(512M)
- *   e000_0000-e3ff_ffff: LBC 64M, 32-bit flash on CS6
- *   e400_0000-e7ff_ffff: LBC 64M, 32-bit flash on CS1
- *   e800_0000-efff_ffff: LBC 128M, nothing here
- *   f000_0000-f3ff_ffff: LBC 64M, SDRAM on CS3
- *   f400_0000-f7ff_ffff: LBC 64M, SDRAM on CS4
- *   f800_0000-fdff_ffff: LBC 64M, nothing here
- *   fc00_0000-fcff_ffff: LBC 16M, CSR,RTC,UART,etc on CS5
- *   fd00_0000-fdff_ffff: LBC 16M, nothing here
- *   fe00_0000-feff_ffff: LBC 16M, nothing here
- *   ff00_0000-ff6f_ffff: LBC 7M, nothing here
- *   ff70_0000-ff7f_ffff: CCSRBAR 1M
- *   ff80_0000-ffff_ffff: LBC 8M, 8-bit flash on CS0
- * Note: CCSRBAR and L2-as-SRAM don't need configure Local Access
- *       Window.
- * Note: If flash is 8M at default position(last 8M),no LAW needed.
- */
-
-struct law_entry law_table[] = {
-#ifndef CONFIG_SPD_EEPROM
-	SET_LAW(CONFIG_SYS_DDR_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_DDR),
-#endif
-	SET_LAW(CONFIG_SYS_PCI_MEM_PHYS, LAW_SIZE_256M, LAW_TRGT_IF_PCI),
-	SET_LAW(CONFIG_SYS_LBC_SDRAM_BASE, LAW_SIZE_512M, LAW_TRGT_IF_LBC),
-};
-
-int num_law_entries = ARRAY_SIZE(law_table);
diff --git a/board/sbc8560/sbc8560.c b/board/sbc8560/sbc8560.c
deleted file mode 100644
index 98bc7df..0000000
--- a/board/sbc8560/sbc8560.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
- * (C) Copyright 2003,Motorola Inc.
- * Xianghua Xiao, (X.Xiao@motorola.com)
- *
- * (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8560 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <asm/processor.h>
-#include <asm/mmu.h>
-#include <asm/immap_85xx.h>
-#include <asm/fsl_ddr_sdram.h>
-#include <ioports.h>
-#include <spd_sdram.h>
-#include <miiphy.h>
-#include <libfdt.h>
-#include <fdt_support.h>
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PA31 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxENB */
-	/* PA30 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 TxClav   */
-	/* PA29 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 TxSOC  */
-	/* PA28 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 RxENB */
-	/* PA27 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxSOC */
-	/* PA26 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 RxClav */
-	/* PA25 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[0] */
-	/* PA24 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[1] */
-	/* PA23 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[2] */
-	/* PA22 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[3] */
-	/* PA21 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[4] */
-	/* PA20 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[5] */
-	/* PA19 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[6] */
-	/* PA18 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXD[7] */
-	/* PA17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[7] */
-	/* PA16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[6] */
-	/* PA15 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[5] */
-	/* PA14 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[4] */
-	/* PA13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[3] */
-	/* PA12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[2] */
-	/* PA11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[1] */
-	/* PA10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXD[0] */
-	/* PA9  */ {   0,   1,   1,   1,   0,   0   }, /* FCC1 L1TXD */
-	/* PA8  */ {   0,   1,   1,   0,   0,   0   }, /* FCC1 L1RXD */
-	/* PA7  */ {   0,   0,   0,   1,   0,   0   }, /* PA7 */
-	/* PA6  */ {   0,   1,   1,   1,   0,   0   }, /* TDM A1 L1RSYNC */
-	/* PA5  */ {   0,   0,   0,   1,   0,   0   }, /* PA5 */
-	/* PA4  */ {   0,   0,   0,   1,   0,   0   }, /* PA4 */
-	/* PA3  */ {   0,   0,   0,   1,   0,   0   }, /* PA3 */
-	/* PA2  */ {   0,   0,   0,   1,   0,   0   }, /* PA2 */
-	/* PA1  */ {   1,   0,   0,   0,   0,   0   }, /* FREERUN */
-	/* PA0  */ {   0,   0,   0,   1,   0,   0   }  /* PA0 */
-    },
-
-    /* Port B configuration */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TX_ER */
-	/* PB30 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_DV */
-	/* PB29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC2 MII TX_EN */
-	/* PB28 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_ER */
-	/* PB27 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII COL */
-	/* PB26 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII CRS */
-	/* PB25 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[3] */
-	/* PB24 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[2] */
-	/* PB23 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[1] */
-	/* PB22 */ {   1,   1,   0,   1,   0,   0   }, /* FCC2 MII TxD[0] */
-	/* PB21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[0] */
-	/* PB20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[1] */
-	/* PB19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[2] */
-	/* PB18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RxD[3] */
-	/* PB17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_DIV */
-	/* PB16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RX_ERR */
-	/* PB15 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_ERR */
-	/* PB14 */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TX_EN */
-	/* PB13 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:COL */
-	/* PB12 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:CRS */
-	/* PB11 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB10 */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB9  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB8  */ {   0,   1,   0,   0,   0,   0   }, /* FCC3:RXD */
-	/* PB7  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB6  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB5  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB4  */ {   0,   1,   0,   1,   0,   0   }, /* FCC3:TXD */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PC31 */ {   0,   0,   0,   1,   0,   0   }, /* PC31 */
-	/* PC30 */ {   0,   0,   0,   1,   0,   0   }, /* PC30 */
-	/* PC29 */ {   0,   1,   1,   0,   0,   0   }, /* SCC1 EN *CLSN */
-	/* PC28 */ {   0,   0,   0,   1,   0,   0   }, /* PC28 */
-	/* PC27 */ {   0,   0,   0,   1,   0,   0   }, /* UART Clock in */
-	/* PC26 */ {   0,   0,   0,   1,   0,   0   }, /* PC26 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   }, /* PC25 */
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   }, /* PC24 */
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   }, /* ATMTFCLK */
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   }, /* ATMRFCLK */
-	/* PC21 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN RXCLK */
-	/* PC20 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN TXCLK */
-	/* PC19 */ {   1,   1,   0,   0,   0,   0   }, /* FCC2 MII RX_CLK CLK13 */
-	/* PC18 */ {   1,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK14) */
-	/* PC17 */ {   0,   0,   0,   1,   0,   0   }, /* PC17 */
-	/* PC16 */ {   0,   1,   0,   0,   0,   0   }, /* FCC Tx Clock (CLK16) */
-	/* PC15 */ {   1,   1,   0,   0,   0,   0   }, /* PC15 */
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   }, /* SCC1 EN *CD */
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* PC13 */
-	/* PC12 */ {   0,   1,   0,   1,   0,   0   }, /* PC12 */
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   }, /* LXT971 transmit control */
-	/* PC10 */ {   1,   0,   0,   1,   0,   0   }, /* FETHMDC */
-	/* PC9  */ {   1,   0,   0,   0,   0,   0   }, /* FETHMDIO */
-	/* PC8  */ {   0,   0,   0,   1,   0,   0   }, /* PC8 */
-	/* PC7  */ {   0,   0,   0,   1,   0,   0   }, /* PC7 */
-	/* PC6  */ {   0,   0,   0,   1,   0,   0   }, /* PC6 */
-	/* PC5  */ {   0,   0,   0,   1,   0,   0   }, /* PC5 */
-	/* PC4  */ {   0,   0,   0,   1,   0,   0   }, /* PC4 */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* PC3 */
-	/* PC2  */ {   0,   0,   0,   1,   0,   1   }, /* ENET FDE */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* ENET DSQE */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* ENET LBK */
-    },
-
-    /* Port D */
-    {   /*            conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   1,   1,   0,   1,   0,   0   }, /* SCC1 RTS */
-	/* PD28 */ {   1,   1,   0,   0,   0,   0   }, /* SCC2 RxD */
-	/* PD27 */ {   1,   1,   1,   1,   0,   0   }, /* SCC2 TxD */
-	/* PD26 */ {   1,   1,   0,   1,   0,   0   }, /* SCC2 RTS */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   }, /* PD25 */
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   }, /* PD24 */
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   }, /* PD23 */
-	/* PD22 */ {   0,   0,   0,   1,   0,   0   }, /* PD22 */
-	/* PD21 */ {   0,   0,   0,   1,   0,   0   }, /* PD21 */
-	/* PD20 */ {   0,   0,   0,   1,   0,   0   }, /* PD20 */
-	/* PD19 */ {   0,   0,   0,   1,   0,   0   }, /* PD19 */
-	/* PD18 */ {   0,   0,   0,   1,   0,   0   }, /* PD18 */
-	/* PD17 */ {   0,   1,   0,   0,   0,   0   }, /* FCC1 ATMRXPRTY */
-	/* PD16 */ {   0,   1,   0,   1,   0,   0   }, /* FCC1 ATMTXPRTY */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   0,   0,   1,   0,   0   }, /* LED */
-	/* PD13 */ {   0,   0,   0,   0,   0,   0   }, /* PD13 */
-	/* PD12 */ {   0,   0,   0,   0,   0,   0   }, /* PD12 */
-	/* PD11 */ {   0,   0,   0,   0,   0,   0   }, /* PD11 */
-	/* PD10 */ {   0,   0,   0,   0,   0,   0   }, /* PD10 */
-	/* PD9  */ {   0,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   0,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   }, /* PD7 */
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   }, /* PD6 */
-	/* PD5  */ {   0,   0,   0,   1,   0,   1   }, /* PD5 */
-	/* PD4  */ {   0,   0,   0,   1,   0,   1   }, /* PD4 */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-int board_early_init_f (void)
-{
-#if defined(CONFIG_PCI)
-    volatile ccsr_pcix_t *pci = (void *)(CONFIG_SYS_MPC85xx_PCIX_ADDR);
-
-    pci->peer &= 0xfffffffdf; /* disable master abort */
-#endif
-	return 0;
-}
-
-void reset_phy (void)
-{
-#if defined(CONFIG_ETHER_ON_FCC) /* avoid compile warnings for now */
-	volatile unsigned char *bcsr = (unsigned char *) CONFIG_SYS_BCSR;
-#endif
-	/* reset Giga bit Ethernet port if needed here */
-
-	/* reset the CPM FEC port */
-#if (CONFIG_ETHER_INDEX == 2)
-	bcsr[0] &= ~0x20;
-	udelay(2);
-	bcsr[0] |= 0x20;
-	udelay(1000);
-#elif (CONFIG_ETHER_INDEX == 3)
-	bcsr[0] &= ~0x10;
-	udelay(2);
-	bcsr[0] |= 0x10;
-	udelay(1000);
-#endif
-#if defined(CONFIG_MII) && defined(CONFIG_ETHER_ON_FCC)
-	/* reset PHY */
-	miiphy_reset("FCC1", 0x0);
-
-	/* change PHY address to 0x02 */
-	bb_miiphy_write(NULL, 0, MII_MIPSCR, 0xf028);
-
-	bb_miiphy_write(NULL, 0x02, MII_BMCR,
-			BMCR_ANENABLE | BMCR_ANRESTART);
-#endif /* CONFIG_MII */
-}
-
-int checkboard (void)
-{
-	sys_info_t sysinfo;
-	char buf[32];
-
-	get_sys_info (&sysinfo);
-
-#ifdef CONFIG_SBC8560
-	printf ("Board: Wind River SBC8560 Board\n");
-#else
-	printf ("Board: Wind River SBC8540 Board\n");
-#endif
-	printf ("\tCPU: %s MHz\n", strmhz(buf, sysinfo.freqProcessor[0]));
-	printf ("\tCCB: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus));
-	printf ("\tDDR: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus/2));
-	if((CONFIG_SYS_LBC_LCRR & 0x0f) == 2 || (CONFIG_SYS_LBC_LCRR & 0x0f) == 4 \
-		|| (CONFIG_SYS_LBC_LCRR & 0x0f) == 8) {
-		printf ("\tLBC: %s MHz\n",
-			strmhz(buf, sysinfo.freqSystemBus/(CONFIG_SYS_LBC_LCRR & 0x0f)));
-	} else {
-		printf("\tLBC: unknown\n");
-	}
-	printf("\tCPM: %s MHz\n", strmhz(buf, sysinfo.freqSystemBus));
-	printf("L1 D-cache 32KB, L1 I-cache 32KB enabled.\n");
-	return (0);
-}
-
-
-#if defined(CONFIG_SYS_DRAM_TEST)
-int testdram (void)
-{
-	uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START;
-	uint *pend = (uint *) CONFIG_SYS_MEMTEST_END;
-	uint *p;
-
-	printf("SDRAM test phase 1:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0xaaaaaaaa;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test phase 2:\n");
-	for (p = pstart; p < pend; p++)
-		*p = 0x55555555;
-
-	for (p = pstart; p < pend; p++) {
-		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
-			return 1;
-		}
-	}
-
-	printf("SDRAM test passed.\n");
-	return 0;
-}
-#endif
-
-#if !defined(CONFIG_SPD_EEPROM)
-/*************************************************************************
- *  fixed sdram init -- doesn't use serial presence detect.
- ************************************************************************/
-phys_size_t fixed_sdram(void)
-{
-
-#define CONFIG_SYS_DDR_CONTROL 0xc2000000
-
-  #ifndef CONFIG_SYS_RAMBOOT
-	volatile ccsr_ddr_t *ddr= (void *)(CONFIG_SYS_MPC85xx_DDR_ADDR);
-
-#if (CONFIG_SYS_SDRAM_SIZE == 512)
-	ddr->cs0_bnds		= 0x0000000f;
-#else
-	ddr->cs0_bnds		= 0x00000007;
-#endif
-	ddr->cs1_bnds		= 0x0010001f;
-	ddr->cs2_bnds		= 0x00000000;
-	ddr->cs3_bnds		= 0x00000000;
-	ddr->cs0_config		= 0x80000102;
-	ddr->cs1_config		= 0x80000102;
-	ddr->cs2_config		= 0x00000000;
-	ddr->cs3_config		= 0x00000000;
-	ddr->timing_cfg_1	= 0x37334321;
-	ddr->timing_cfg_2	= 0x00000800;
-	ddr->sdram_cfg		= 0x42000000;
-	ddr->sdram_mode		= 0x00000022;
-	ddr->sdram_interval	= 0x05200100;
-	ddr->err_sbe		= 0x00ff0000;
-    #if defined (CONFIG_DDR_ECC)
-	ddr->err_disable = 0x0000000D;
-    #endif
-	asm("sync;isync;msync");
-	udelay(500);
-    #if defined (CONFIG_DDR_ECC)
-	/* Enable ECC checking */
-	ddr->sdram_cfg = (CONFIG_SYS_DDR_CONTROL | 0x20000000);
-    #else
-	ddr->sdram_cfg = CONFIG_SYS_DDR_CONTROL;
-    #endif
-	asm("sync; isync; msync");
-	udelay(500);
-  #endif
-	return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
-}
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
-
-#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
-{
-	int node;
-#ifdef CONFIG_PCI
-	const char *path;
-#endif
-
-	ft_cpu_setup(blob, bd);
-
-	node = fdt_path_offset(blob, "/aliases");
-	if (node >= 0) {
-#ifdef CONFIG_PCI
-		path = fdt_getprop(blob, node, "pci0", NULL);
-		if (path) {
-			tmp[1] = hose.last_busno - hose.first_busno;
-			do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
-		}
-#endif
-	}
-}
-#endif
diff --git a/board/sbc8560/tlb.c b/board/sbc8560/tlb.c
deleted file mode 100644
index fe0ac76..0000000
--- a/board/sbc8560/tlb.c
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- * Copyright 2008 Freescale Semiconductor, Inc.
- *
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/mmu.h>
-
-struct fsl_e_tlb_entry tlb_table[] = {
-/* TLB for CCSRBAR (IMMR) */
-	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 1, BOOKE_PAGESZ_1M, 1),
-
-/* TLB for Local Bus stuff, just map the whole 512M */
-/* note that the LBC SDRAM is cache-inhibit and guarded, like everything else */
-
-	SET_TLB_ENTRY(1, 0xe0000000, 0xe0000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 2, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY(1, 0xf0000000, 0xf0000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 3, BOOKE_PAGESZ_256M, 1),
-
-#if !defined(CONFIG_SPD_EEPROM)
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE, CONFIG_SYS_DDR_SDRAM_BASE,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 4, BOOKE_PAGESZ_256M, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000, CONFIG_SYS_DDR_SDRAM_BASE + 0x10000000,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 5, BOOKE_PAGESZ_256M, 1),
-#endif
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_RAM_ADDR, CONFIG_SYS_INIT_RAM_ADDR,
-		      MAS3_SX|MAS3_SW|MAS3_SR, 0,
-		      0, 6, BOOKE_PAGESZ_16K, 1),
-
-	SET_TLB_ENTRY(1, CONFIG_SYS_PCI_MEM_PHYS, CONFIG_SYS_PCI_MEM_PHYS,
-		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
-		      0, 7, BOOKE_PAGESZ_256M, 1),
-};
-
-int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/board/siemens/IAD210/IAD210.c b/board/siemens/IAD210/IAD210.c
deleted file mode 100644
index 7325a93..0000000
--- a/board/siemens/IAD210/IAD210.c
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * (C) Copyright 2001
- * Paul Geerinckx
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-#include <net.h>
-#include "atm.h"
-#include <i2c.h>
-
-/* ------------------------------------------------------------------------- */
-
-static long int dram_size (long int, long int *, long int);
-
-/* ------------------------------------------------------------------------- */
-
-/* used PLD registers */
-#  define PLD_GCR1_REG (unsigned char *) (0x10000000 + 0)
-#  define PLD_EXT_RES  (unsigned char *) (0x10000000 + 10)
-#  define PLD_EXT_FETH (unsigned char *) (0x10000000 + 11)
-#  define PLD_EXT_LED  (unsigned char *) (0x10000000 + 12)
-#  define PLD_EXT_X21  (unsigned char *) (0x10000000 + 13)
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint sdram_table[] = {
-	/*
-	 * Single Read. (Offset 0 in UPMA RAM)
-	 */
-	0xFE2DB004, 0xF0AA7004, 0xF0A5F400, 0xF3AFFC47,	/* last */
-	_NOT_USED_,
-	/*
-	 * SDRAM Initialization (offset 5 in UPMA RAM)
-	 *
-	 * This is no UPM entry point. The following definition uses
-	 * the remaining space to establish an initialization
-	 * sequence, which is executed by a RUN command.
-	 *
-	 */
-	0xFFFAF834, 0xFFE5B435,	/* last */
-	_NOT_USED_,
-	/*
-	 * Burst Read. (Offset 8 in UPMA RAM)
-	 */
-	0xFE2DB004, 0xF0AF7404, 0xF0AFFC00, 0xF0AFFC00,
-	0xF0AFFC00, 0xF0AAF800, 0xF1A5E447,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Single Write. (Offset 18 in UPMA RAM)
-	 */
-	0xFE29B300, 0xF1A27304, 0xFFA5F747,	/* last */
-	_NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Burst Write. (Offset 20 in UPMA RAM)
-	 */
-	0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
-	0xF1AAF804, 0xFFA5F447,	/* last */
-	_NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * Refresh  (Offset 30 in UPMA RAM)
-	 */
-	0xFFAC3884, 0xFFAC3404, 0xFFAFFC04, 0xFFAFFC84,
-	0xFFAFFC07,		/* last */
-	_NOT_USED_, _NOT_USED_, _NOT_USED_,
-	/*
-	 * MRS sequence  (Offset 38 in UPMA RAM)
-	 */
-	0xFFAAB834, 0xFFA57434, 0xFFAFFC05,	/* last */
-	_NOT_USED_,
-	/*
-	 * Exception. (Offset 3c in UPMA RAM)
-	 */
-	0xFFAFFC04, 0xFFAFFC05,	/* last */
-	_NOT_USED_, _NOT_USED_,
-};
-
-/* ------------------------------------------------------------------------- */
-
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	volatile iop8xx_t *iop = &immap->im_ioport;
-	volatile fec_t *fecp = &immap->im_cpm.cp_fec;
-	long int size;
-
-	upmconfig (UPMA, (uint *) sdram_table,
-		   sizeof (sdram_table) / sizeof (uint));
-
-	/*
-	 * Preliminary prescaler for refresh (depends on number of
-	 * banks): This value is selected for four cycles every 62.4 us
-	 * with two SDRAM banks or four cycles every 31.2 us with one
-	 * bank. It will be adjusted after memory sizing.
-	 */
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-	memctl->memc_mar = 0x00000088;
-
-	/*
-	 * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
-	 * preliminary addresses - these have to be modified after the
-	 * SDRAM size has been determined.
-	 */
-	memctl->memc_or2 = CONFIG_SYS_OR2_PRELIM;
-	memctl->memc_br2 = CONFIG_SYS_BR2_PRELIM;
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR & (~(MAMR_PTAE));	/* no refresh yet */
-
-	udelay (200);
-
-	/* perform SDRAM initializsation sequence */
-
-	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 0 */
-	udelay (1);
-	memctl->memc_mcr = 0x80004230;	/* SDRAM bank 0 - execute twice */
-	udelay (1);
-
-	memctl->memc_mcr = 0x80004105;	/* SDRAM precharge */
-	udelay (1);
-	memctl->memc_mcr = 0x80004030;	/* SDRAM 16x autorefresh */
-	udelay (1);
-	memctl->memc_mcr = 0x80004138;	/* SDRAM upload parameters */
-	udelay (1);
-
-	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
-
-	udelay (1000);
-
-	/*
-	 * Check Bank 0 Memory Size for re-configuration
-	 *
-	 */
-	size = dram_size (CONFIG_SYS_MAMR, (long *) SDRAM_BASE_PRELIM,
-			  SDRAM_MAX_SIZE);
-
-	udelay (1000);
-
-
-	memctl->memc_mamr = CONFIG_SYS_MAMR;
-	udelay (1000);
-
-	/*
-	 * Final mapping
-	 */
-	memctl->memc_or2 = ((-size) & 0xFFFF0000) | CONFIG_SYS_OR2_PRELIM;
-	memctl->memc_br2 = ((CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V);
-
-	udelay (10000);
-
-	/* prepare pin multiplexing for fast ethernet */
-
-	atmLoad ();
-	fecp->fec_ecntrl = 0x00000004;	/* rev D3 pinmux SET */
-	iop->iop_pdpar |= 0x0080;	/* set pin as MII_clock */
-
-
-	return (size);
-}
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'. Some (not all) hardware errors are detected:
- * - short between address lines
- * - short between data lines
- */
-
-static long int dram_size (long int mamr_value, long int *base,
-			   long int maxsize)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	memctl->memc_mamr = mamr_value;
-
-	return (get_ram_size (base, maxsize));
-}
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	return (0);
-}
-
-void board_serial_init (void)
-{
-	;			/* nothing to do here */
-}
-
-void board_ether_init (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile iop8xx_t *iop = &immap->im_ioport;
-	volatile fec_t *fecp = &immap->im_cpm.cp_fec;
-
-	atmLoad ();
-	fecp->fec_ecntrl = 0x00000004;	/* rev D3 pinmux SET */
-	iop->iop_pdpar |= 0x0080;	/* set pin as MII_clock */
-}
-
-int board_early_init_f (void)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	volatile iop8xx_t *iop = &immap->im_ioport;
-
-	/* configure the LED timing output pins - port A pin 4 */
-	iop->iop_papar = 0x0800;
-	iop->iop_padir = 0x0800;
-
-	/* start timer 2 for the 4hz LED blink rate */
-	timers->cpmt_tmr2 = 0xff2c;	/* 4HZ for 64MHz */
-	timers->cpmt_trr2 = 0x000003d0;	/* clk/16 , prescale=256 */
-	timers->cpmt_tgcr = 0x00000810;	/* run timer 2 */
-
-	/* chip select for PLD access */
-	memctl->memc_br6 = 0x10000401;
-	memctl->memc_or6 = 0xFC000908;
-
-	/* PLD initial values ( set LEDs, remove reset on LXT) */
-
-	*PLD_GCR1_REG = 0x06;
-	*PLD_EXT_RES = 0xC0;
-	*PLD_EXT_FETH = 0x40;
-	*PLD_EXT_LED = 0xFF;
-	*PLD_EXT_X21 = 0x04;
-	return 0;
-}
-
-static void board_get_enetaddr(uchar *addr)
-{
-	int i;
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile cpm8xx_t *cpm = &immap->im_cpm;
-	unsigned int rccrtmp;
-
-	char default_mac_addr[] = { 0x00, 0x08, 0x01, 0x02, 0x03, 0x04 };
-
-	for (i = 0; i < 6; i++)
-		addr[i] = default_mac_addr[i];
-
-	printf ("There is an error in the i2c driver .. /n");
-	printf ("You need to fix it first....../n");
-
-	rccrtmp = cpm->cp_rccr;
-	cpm->cp_rccr |= 0x0020;
-
-	i2c_reg_read (0xa0, 0);
-	printf ("seep = '-%c-%c-%c-%c-%c-%c-'\n",
-		i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0),
-		i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0),
-		i2c_reg_read (0xa0, 0), i2c_reg_read (0xa0, 0));
-
-	cpm->cp_rccr = rccrtmp;
-}
-
-int misc_init_r(void)
-{
-	uchar enetaddr[6];
-
-	if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
-		board_get_enetaddr(enetaddr);
-		eth_setenv_enetaddr("ethaddr", enetaddr);
-	}
-
-	return 0;
-}
diff --git a/board/siemens/IAD210/Makefile b/board/siemens/IAD210/Makefile
deleted file mode 100644
index bb81507..0000000
--- a/board/siemens/IAD210/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o flash.o atm.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/siemens/IAD210/atm.c b/board/siemens/IAD210/atm.c
deleted file mode 100644
index 40aad0a..0000000
--- a/board/siemens/IAD210/atm.c
+++ /dev/null
@@ -1,652 +0,0 @@
-#include <common.h>
-#include <mpc8xx.h>
-#include <commproc.h>
-
-#include "atm.h"
-#include <linux/stddef.h>
-
-#define SYNC __asm__("sync")
-#define MY_ALIGN(p, a) ((char *)(((uint32)(p)+(a)-1) & ~((uint32)(a)-1)))
-
-#define FALSE  1
-#define TRUE   0
-#define OK     0
-#define ERROR -1
-
-struct atm_connection_t g_conn[NUM_CONNECTIONS] =
-{
-  { NULL, 10, NULL, 10,  NULL, NULL, NULL, NULL }, /* OAM  */
-};
-
-struct atm_driver_t g_atm =
-{
-  FALSE,   /* loaded */
-  FALSE,   /* started */
-  NULL,    /* csram */
-  0,       /* csram_size */
-  NULL,    /* am_top */
-  NULL,    /* ap_top */
-  NULL,    /* int_reload_ptr */
-  NULL,    /* int_serv_ptr */
-  NULL,    /* rbd_base_ptr */
-  NULL,    /* tbd_base_ptr */
-  0        /* linerate */
-};
-
-char csram[1024]; /* more than enough for doing nothing*/
-
-int    atmLoad(void);
-void   atmUnload(void);
-int    atmMemInit(void);
-void   atmIntInit(void);
-void   atmApcInit(void);
-void   atmAmtInit(void);
-void   atmCpmInit(void);
-void   atmUtpInit(void);
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmLoad
- *
- * DESCRIPTION: Basic ATM initialization.
- *
- * PARAMETERS: none
- *
- * RETURNS: OK or ERROR
- *
- ****************************************************************************/
-int atmLoad()
-{
-  volatile immap_t       *immap  = (immap_t *)CONFIG_SYS_IMMR;
-  volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
-  volatile iop8xx_t      *iop    = &immap->im_ioport;
-
-  timers->cpmt_tgcr &=  0x0FFF; SYNC;             /* Disable Timer 4 */
-  immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC; /* Disable SCC4 */
-  iop->iop_pdpar &= 0x3FFF; SYNC;                 /* Disable SAR and UTOPIA */
-
-  if ( atmMemInit() != OK ) return ERROR;
-
-  atmIntInit();
-  atmApcInit();
-  atmAmtInit();
-  atmCpmInit();
-  atmUtpInit();
-
-  g_atm.loaded = TRUE;
-
-  return OK;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmUnload
- *
- * DESCRIPTION: Disables ATM and UTOPIA.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmUnload()
-{
-  volatile immap_t       *immap  = (immap_t *)CONFIG_SYS_IMMR;
-  volatile cpmtimer8xx_t *timers = &immap->im_cpmtimer;
-  volatile iop8xx_t      *iop    = &immap->im_ioport;
-
-  timers->cpmt_tgcr &=  0x0FFF; SYNC;             /* Disable Timer 4 */
-  immap->im_cpm.cp_scc[3].scc_gsmrl = 0x0; SYNC;  /* Disable SCC4 */
-  iop->iop_pdpar &= 0x3FFF; SYNC;                 /* Disable SAR and UTOPIA */
-  g_atm.loaded = FALSE;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmMemInit
- *
- * DESCRIPTION:
- *
- * The ATM driver uses the following resources:
- *
- * A. Memory in DPRAM to hold
- *
- *     1/ CT          = Connection Table ( RCT & TCT )
- *     2/ TCTE        = Transmit Connection Table Extension
- *     3/ MPHYPT      = Multi-PHY Pointing Table
- *     4/ APCP        = APC Parameter Table
- *     5/ APCT_PRIO_1 = APC Table ( priority 1 for AAL1/2 )
- *     6/ APCT_PRIO_2 = APC Table ( priority 2 for VBR )
- *     7/ APCT_PRIO_3 = APC Table ( priority 3 for UBR )
- *     8/ TQ          = Transmit Queue
- *     9/ AM          = Address Matching Table
- *    10/ AP          = Address Pointing Table
- *
- * B. Memory in cache safe RAM to hold
- *
- *     1/ INT         = Interrupt Queue
- *     2/ RBD         = Receive Buffer Descriptors
- *     3/ TBD         = Transmit Buffer Descriptors
- *
- * This function
- * 1. clears the ATM DPRAM area,
- * 2. Allocates and clears cache safe memory,
- * 3. Initializes 'g_conn'.
- *
- * PARAMETERS: none
- *
- * RETURNS: OK or ERROR
- *
- ****************************************************************************/
-int atmMemInit()
-{
-  int i;
-  unsigned immr = CONFIG_SYS_IMMR;
-  int total_num_rbd = 0;
-  int total_num_tbd = 0;
-
-  memset((char *)CONFIG_SYS_IMMR + 0x2000 + ATM_DPRAM_BEGIN, 0x00, ATM_DPRAM_SIZE);
-
-  g_atm.csram_size = NUM_INT_ENTRIES * SIZE_OF_INT_ENTRY;
-
-  for ( i = 0; i < NUM_CONNECTIONS; ++i ) {
-    total_num_rbd += g_conn[i].num_rbd;
-    total_num_tbd += g_conn[i].num_tbd;
-  }
-
-  g_atm.csram_size += total_num_rbd * SIZE_OF_RBD + total_num_tbd * SIZE_OF_TBD + 4;
-
-  g_atm.csram = &csram[0];
-  memset(&(g_atm.csram), 0x00, g_atm.csram_size);
-
-  g_atm.int_reload_ptr = (uint32 *)MY_ALIGN(g_atm.csram, 4);
-  g_atm.rbd_base_ptr = (struct atm_bd_t *)(g_atm.int_reload_ptr + NUM_INT_ENTRIES);
-  g_atm.tbd_base_ptr = (struct atm_bd_t *)(g_atm.rbd_base_ptr + total_num_rbd);
-
-  g_conn[0].rbd_ptr = g_atm.rbd_base_ptr;
-  g_conn[0].tbd_ptr = g_atm.tbd_base_ptr;
-  g_conn[0].ct_ptr = CT_PTR(immr);
-  g_conn[0].tcte_ptr = TCTE_PTR(immr);
-
-  return OK;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmIntInit
- *
- * DESCRIPTION:
- *
- * Initialization of the MPC860 ESAR Interrupt Queue.
- * This function
- * - clears all entries in the INT,
- * - sets the WRAP bit of the last INT entry,
- * - initializes the 'int_serv_ptr' attribuut of the AtmDriver structure
- *   to the first INT entry.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARKS:
- *
- * - The INT resides in external cache safe memory.
- * - The base address of the INT is stored in g_atm.int_reload_ptr.
- * - The number of entries in the INT is given by NUM_INT_ENTRIES.
- * - The INTBASE field in SAR Parameter RAM is set by atmCpmInit().
- *
- ****************************************************************************/
-void atmIntInit()
-{
-  int i;
-  for ( i = 0; i < NUM_INT_ENTRIES - 1; ++i) g_atm.int_reload_ptr[i] = 0;
-  g_atm.int_reload_ptr[i] = INT_WRAP;
-  g_atm.int_serv_ptr = g_atm.int_reload_ptr;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmApcInit
- *
- * DESCRIPTION:
- *
- * This function initializes the following ATM Pace Controller related
- * data structures:
- *
- * - 1 MPHY Pointing Table (contains only one entry)
- * - 3 APC Parameter Tables (one PHY with 3 priorities)
- * - 3 APC Tables (one table for each priority)
- * - 1 Transmit Queue (one transmit queue per PHY)
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmApcInit()
-{
-  int i;
-  /* unsigned immr = CONFIG_SYS_IMMR; */
-  uint16 * mphypt_ptr = MPHYPT_PTR(CONFIG_SYS_IMMR);
-  struct apc_params_t * apcp_ptr = APCP_PTR(CONFIG_SYS_IMMR);
-  uint16 * apct_prio1_ptr = APCT1_PTR(CONFIG_SYS_IMMR);
-  uint16 * tq_ptr = TQ_PTR(CONFIG_SYS_IMMR);
-  /***************************************************/
-  /* Initialize MPHY Pointing Table (only one entry) */
-  /***************************************************/
-  *mphypt_ptr = APCP_BASE;
-
-  /********************************************/
-  /* Initialize APC parameters for priority 1 */
-  /********************************************/
-  apcp_ptr->apct_base1 = APCT_PRIO_1_BASE;
-  apcp_ptr->apct_end1  =  APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * 2;
-  apcp_ptr->apct_ptr1  =  APCT_PRIO_1_BASE;
-  apcp_ptr->apct_sptr1 = APCT_PRIO_1_BASE;
-  apcp_ptr->etqbase    = TQ_BASE;
-  apcp_ptr->etqend     =  TQ_BASE + ( NUM_TQ_ENTRIES - 1 ) * 2;
-  apcp_ptr->etqaptr    = TQ_BASE;
-  apcp_ptr->etqtptr    = TQ_BASE;
-  apcp_ptr->apc_mi     = 8;
-  apcp_ptr->ncits      = 0x0100;   /* NCITS = 1 */
-  apcp_ptr->apcnt      = 0;
-  apcp_ptr->reserved1  = 0;
-  apcp_ptr->eapcst     = 0x2009;  /* LAST, ESAR, MPHY */
-  apcp_ptr->ptp_counter = 0;
-  apcp_ptr->ptp_txch   = 0;
-  apcp_ptr->reserved2  = 0;
-
-
-  /***************************************************/
-  /* Initialize APC Tables with empty slots (0xFFFF) */
-  /***************************************************/
-  for ( i = 0; i < NUM_APCT_PRIO_1_ENTRIES; ++i ) *(apct_prio1_ptr++) = 0xFFFF;
-
-  /************************/
-  /* Clear Transmit Queue */
-  /************************/
-  for ( i = 0; i < NUM_TQ_ENTRIES; ++i ) *(tq_ptr++) = 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmAmtInit
- *
- * DESCRIPTION:
- *
- * This function clears the first entry in the Address Matching Table and
- * lets the first entry in the Address Pointing table point to the first
- * entry in the TCT table (i.e. the raw cell channel).
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARKS:
- *
- * The values for the AMBASE, AMEND and APBASE registers in SAR parameter
- * RAM are initialized by atmCpmInit().
- *
- ****************************************************************************/
-void atmAmtInit()
-{
-  unsigned immr = CONFIG_SYS_IMMR;
-
-  g_atm.am_top = AM_PTR(immr);
-  g_atm.ap_top = AP_PTR(immr);
-
-  *(g_atm.ap_top--) = CT_BASE;
-  *(g_atm.am_top--) = 0;
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmCpmInit
- *
- * DESCRIPTION:
- *
- * This function initializes the Utopia Interface Parameter RAM Map
- * (SCC4, ATM Protocol) of the Communication Processor Modudule.
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- ****************************************************************************/
-void atmCpmInit()
-{
-  unsigned immr = CONFIG_SYS_IMMR;
-
-  memset((char *)immr + 0x3F00, 0x00, 0xC0);
-
-  /*-----------------------------------------------------------------*/
-  /* RBDBASE - Receive buffer descriptors base address               */
-  /* The RBDs reside in cache safe external memory.                  */
-  /*-----------------------------------------------------------------*/
-  *RBDBASE(immr) = (uint32)g_atm.rbd_base_ptr;
-
-  /*-----------------------------------------------------------------*/
-  /* SRFCR - SAR receive function code                               */
-  /* 0-2 rsvd = 000                                                  */
-  /* 3-4 BO   = 11  Byte ordering (big endian).                      */
-  /* 5-7 FC   = 000 Value driven on the address type signals AT[1-3] */
-  /*                when the SDMA channel accesses memory.           */
-  /*-----------------------------------------------------------------*/
-  *SRFCR(immr) = 0x18;
-
-  /*-----------------------------------------------------------------*/
-  /* SRSTATE - SAR receive status                                    */
-  /* 0 EXT  = 0 Extended mode off.                                   */
-  /* 1 ACP  = 0 Valid only if EXT = 1.                               */
-  /* 2 EC   = 0 Standard 53-byte ATM cell.                           */
-  /* 3 SNC  = 0 In sync. Must be set to 0 during initialization.     */
-  /* 4 ESAR = 1 Enhanced SAR functionality enabled.                  */
-  /* 5 MCF  = 1 Management Cell Filter active.                       */
-  /* 6 SER  = 0 UTOPIA mode.                                         */
-  /* 7 MPY  = 1 Multiple PHY mode.                                   */
-  /*-----------------------------------------------------------------*/
-  *SRSTATE(immr) = 0x0D;
-
-  /*-----------------------------------------------------------------*/
-  /* MRBLR - Maximum receive buffer length register.                 */
-  /* Must be cleared for ATM operation (see also SMRBLR).            */
-  /*-----------------------------------------------------------------*/
-  *MRBLR(immr) = 0;
-
-  /*-----------------------------------------------------------------*/
-  /* RSTATE - SCC internal receive state parameters                  */
-  /* The first byte must be initialized with the value of SRFCR.     */
-  /*-----------------------------------------------------------------*/
-  *RSTATE(immr) = (uint32)(*SRFCR(immr)) << 24;
-
-  /*-----------------------------------------------------------------*/
-  /* STFCR - SAR transmit function code                              */
-  /* 0-2 rsvd = 000                                                  */
-  /* 3-4 BO   = 11  Byte ordering (big endian).                      */
-  /* 5-7 FC   = 000 Value driven on the address type signals AT[1-3] */
-  /*                when the SDMA channel accesses memory.           */
-  /*-----------------------------------------------------------------*/
-  *STFCR(immr) = 0x18;
-
-  /*-----------------------------------------------------------------*/
-  /* SRSTATE - SAR transmit status                                   */
-  /* 0 EXT  = 0 : Extended mode off                                  */
-  /* 1 rsvd = 0 :                                                    */
-  /* 2 EC   = 0 : Standard 53-byte ATM cell                          */
-  /* 3 rsvd = 0 :                                                    */
-  /* 4 ESAR = 1 : Enhanced SAR functionality enabled                 */
-  /* 5 rsvd = 0 :                                                    */
-  /* 6 SER  = 0 : UTOPIA mode                                        */
-  /* 7 MPY  = 1 : Multiple PHY mode                                  */
-  /*-----------------------------------------------------------------*/
-  *STSTATE(immr) = 0x09;
-
-  /*-----------------------------------------------------------------*/
-  /* TBDBASE - Transmit buffer descriptors base address              */
-  /* The TBDs reside in cache safe external memory.                  */
-  /*-----------------------------------------------------------------*/
-  *TBDBASE(immr) = (uint32)g_atm.tbd_base_ptr;
-
-  /*-----------------------------------------------------------------*/
-  /* TSTATE - SCC internal transmit state parameters                 */
-  /* The first byte must be initialized with the value of STFCR.     */
-  /*-----------------------------------------------------------------*/
-  *TSTATE(immr) = (uint32)(*STFCR(immr)) << 24;
-
-  /*-----------------------------------------------------------------*/
-  /* CTBASE - Connection table base address                          */
-  /* Offset from the beginning of DPRAM (64-byte aligned).           */
-  /*-----------------------------------------------------------------*/
-  *CTBASE(immr) = CT_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* INTBASE - Interrupt queue base pointer.                         */
-  /* The interrupt queue resides in cache safe external memory.      */
-  /*-----------------------------------------------------------------*/
-  *INTBASE(immr) = (uint32)g_atm.int_reload_ptr;
-
-  /*-----------------------------------------------------------------*/
-  /* INTPTR - Pointer into interrupt queue.                          */
-  /* Initialize to INTBASE.                                          */
-  /*-----------------------------------------------------------------*/
-  *INTPTR(immr) = *INTBASE(immr);
-
-  /*-----------------------------------------------------------------*/
-  /* C_MASK - Constant mask for CRC32                                */
-  /* Must be initialized to 0xDEBB20E3.                              */
-  /*-----------------------------------------------------------------*/
-  *C_MASK(immr) = 0xDEBB20E3;
-
-  /*-----------------------------------------------------------------*/
-  /* INT_ICNT - Interrupt threshold value                            */
-  /*-----------------------------------------------------------------*/
-  *INT_ICNT(immr) = 1;
-
-  /*-----------------------------------------------------------------*/
-  /* INT_CNT - Interrupt counter                                     */
-  /* Initalize to INT_ICNT. Decremented for each interrupt entry     */
-  /* reported in the interrupt queue. On zero an interrupt is        */
-  /* signaled to the host by setting the GINT bit in the event       */
-  /* register. The counter is reinitialized with INT_ICNT.           */
-  /*-----------------------------------------------------------------*/
-  *INT_CNT(immr) = *INT_ICNT(immr);
-
-  /*-----------------------------------------------------------------*/
-  /* SMRBLR - SAR maximum receive buffer length register.            */
-  /* Must be a multiple of 48 bytes. Common for all ATM connections. */
-  /*-----------------------------------------------------------------*/
-  *SMRBLR(immr) = SAR_RXB_SIZE;
-
-  /*-----------------------------------------------------------------*/
-  /* APCST - APC status register.                                    */
-  /* 0     rsvd 0                                                    */
-  /* 1-2   CSER 11  Initialize with the same value as NSER.          */
-  /* 3-4   NSER 11  Next serial or UTOPIA channel.                   */
-  /* 5-7   rsvd 000                                                  */
-  /* 8-10  rsvd 000                                                  */
-  /* 11    rsvd 0                                                    */
-  /* 12    ESAR 1   UTOPIA Level 2 MPHY enabled.                     */
-  /* 13    DIS  0   APC disable. Must be initiazed to 0.             */
-  /* 14    PL2  0   Not used.                                        */
-  /* 15    MPY  1   Multiple PHY mode on.                            */
-  /*-----------------------------------------------------------------*/
-  *APCST(immr) = 0x7809;
-
-  /*-----------------------------------------------------------------*/
-  /* APCPTR - Pointer to the APC parameter table                     */
-  /* In MPHY master mode this parameter points to the MPHY pointing  */
-  /* table. 2-byte aligned.                                          */
-  /*-----------------------------------------------------------------*/
-  *APCPTR(immr) = MPHYPT_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* HMASK - Header mask                                             */
-  /* Each incoming cell is masked with HMASK before being compared   */
-  /* to the entries in the address matching table.                   */
-  /*-----------------------------------------------------------------*/
-  *HMASK(immr) = AM_HMASK;
-
-  /*-----------------------------------------------------------------*/
-  /* AMBASE - Address matching table base address                    */
-  /*-----------------------------------------------------------------*/
-  *AMBASE(immr) = AM_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* AMEND - Address matching table end address                      */
-  /*-----------------------------------------------------------------*/
-  *AMEND(immr) = AM_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* APBASE - Address pointing table base address                    */
-  /*-----------------------------------------------------------------*/
-  *APBASE(immr) = AP_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* MPHYST - MPHY status register                                   */
-  /* 0-1   rsvd  00                                                  */
-  /* 2-6   NMPHY 00000 1 PHY                                         */
-  /* 7-9   rsvd  000                                                 */
-  /* 10-14 CMPHY 00000 Initialize with same value as NMPHY           */
-  /*-----------------------------------------------------------------*/
-  *MPHYST(immr) = 0x0000;
-
-  /*-----------------------------------------------------------------*/
-  /* TCTEBASE - Transmit connection table extension base address     */
-  /* Offset from the beginning of DPRAM (32-byte aligned).           */
-  /*-----------------------------------------------------------------*/
-  *TCTEBASE(immr) = TCTE_BASE;
-
-  /*-----------------------------------------------------------------*/
-  /* Clear not used registers.                                       */
-  /*-----------------------------------------------------------------*/
-}
-
-/*****************************************************************************
- *
- * FUNCTION NAME: atmUtpInit
- *
- * DESCRIPTION:
- *
- * This function initializes the ATM interface for
- *
- * - UTOPIA mode
- * - muxed bus
- * - master operation
- * - multi PHY (because of a bug in the MPC860P rev. E.0)
- * - internal clock = SYSCLK / 2
- *
- * EXTERNAL EFFECTS:
- *
- * After calling this function, the MPC860ESAR UTOPIA bus is
- * active and uses the following ports/pins:
- *
- * Port    Pin  Signal   Description
- * ------  ---  -------  -------------------------------------------
- * PB[15]  R17  TxClav   Transmit cell available input/output signal
- * PC[15]  D16  RxClav   Receive cell available input/output signal
- * PD[15]  U17  UTPB[0]  UTOPIA bus bit 0 input/output signal
- * PD[14]  V19  UTPB[1]  UTOPIA bus bit 1 input/output signal
- * PD[13]  V18  UTPB[2]  UTOPIA bus bit 2 input/output signal
- * PD[12]  R16  UTPB[3]  UTOPIA bus bit 3 input/output signal
- * PD[11]  T16  RXENB    Receive enable input/output signal
- * PD[10]  W18  TXENB    Transmit enable input/output signal
- * PD[9]   V17  UTPCLK   UTOPIA clock input/output signal
- * PD[7]   T15  UTPB[4]  UTOPIA bus bit 4 input/output signal
- * PD[6]   V16  UTPB[5]  UTOPIA bus bit 5 input/output signal
- * PD[5]   U15  UTPB[6]  UTOPIA bus bit 6 input/output signal
- * PD[4]   U16  UTPB[7]  UTOPIA bus bit 7 input/output signal
- * PD[3]   W16  SOC      Start of cell input/output signal
- *
- * PARAMETERS: none
- *
- * RETURNS: void
- *
- * REMARK:
- *
- * The ATM parameters and data structures must be configured before
- * initializing the UTOPIA port. The UTOPIA port activates immediately
- * upon initialization, and if its associated data structures are not
- * initialized, the CPM will lock up.
- *
- ****************************************************************************/
-void atmUtpInit()
-{
-  volatile immap_t       *immap  = (immap_t *)CONFIG_SYS_IMMR;
-  volatile iop8xx_t      *iop    = &immap->im_ioport;
-  volatile car8xx_t	 *car    = &immap->im_clkrst;
-  volatile cpm8xx_t	 *cpm    = &immap->im_cpm;
-  int flag;
-
-  flag = disable_interrupts();
-
-  /*-----------------------------------------------------------------*/
-  /* SCCR - System Clock Control Register                            */
-  /*                                                                 */
-  /* The UTOPIA clock can be selected to be internal clock or        */
-  /* external clock (selected by the UTOPIA mode register).          */
-  /* In case of internal clock, the UTOPIA clock is derived from     */
-  /* the system frequency divided by two dividers.                   */
-  /* Bits 27-31 of the SCCR register are defined to control the      */
-  /* UTOPIA clock.                                                   */
-  /*                                                                 */
-  /* SCCR[27:29] DFUTP  Division factor. Divide the system clock     */
-  /*                    by 2^DFUTP.                                  */
-  /* SCCR[30:31] DFAUTP Additional division factor. Divide the       */
-  /*                    system clock by the following value:         */
-  /*                    00 = divide by 1                             */
-  /*                    00 = divide by 3                             */
-  /*                    10 = divide by 5                             */
-  /*                    11 = divide by 7                             */
-  /*                                                                 */
-  /* Note that the UTOPIA clock must be programmed as to operate     */
-  /* within the range SYSCLK/10 .. 50MHz.                            */
-  /*-----------------------------------------------------------------*/
-  car->car_sccr &= 0xFFFFFFE0;
-  car->car_sccr |= 0x00000008; /* UTPCLK = SYSCLK / 4 */
-
-  /*-----------------------------------------------------------------*/
-  /* RCCR - RISC Controller Configuration Register                   */
-  /*                                                                 */
-  /* RCCR[8]     DR1M IDMA Request 0 Mode                            */
-  /*                  0 = edge sensitive                             */
-  /*                  1 = level sensitive                            */
-  /* RCCR[9]     DR0M IDMA Request 0 Mode                            */
-  /*                  0 = edge sensitive                             */
-  /*                  1 = level sensitive                            */
-  /* RCCR[10:11] DRQP IDMA Request Priority                          */
-  /*                  00 = IDMA req. have more prio. than SCCs       */
-  /*                  01 = IDMA req. have less prio. then SCCs       */
-  /*                  10 = IDMA requests have the lowest prio.       */
-  /*                  11 = reserved                                  */
-  /*                                                                 */
-  /* The RCCR[DR0M] and RCCR[DR1M] bits must be set to enable UTOPIA */
-  /* operation. Also, program RCCR[DPQP] to 01 to give SCC transfers */
-  /* higher priority.                                                */
-  /*-----------------------------------------------------------------*/
-  cpm->cp_rccr &= 0xFF0F;
-  cpm->cp_rccr |= 0x00D0;
-
-  /*-----------------------------------------------------------------*/
-  /* Port B - TxClav Signal                                          */
-  /*-----------------------------------------------------------------*/
-  cpm->cp_pbpar |= 0x00010000; /* PBPAR[15] = 1 */
-  cpm->cp_pbdir &= 0xFFFEFFFF; /* PBDIR[15] = 0 */
-
-  /*-----------------------------------------------------------------*/
-  /* UTOPIA Mode Register                                            */
-  /*                                                                 */
-  /* - muxed bus (master operation only)                             */
-  /* - multi PHY (because of a bug in the MPC860P rev.E.0)           */
-  /* - internal clock                                                */
-  /* - no loopback                                                   */
-  /* - do no activate statistical counters                           */
-  /*-----------------------------------------------------------------*/
-  iop->utmode = 0x00000004; SYNC;
-
-  /*-----------------------------------------------------------------*/
-  /* Port D - UTOPIA Data and Control Signals                        */
-  /*                                                                 */
-  /* 15-12 UTPB[0:3] UTOPIA bus bit 0 - 3 input/output signals       */
-  /* 11    RXENB     UTOPIA receive enable input/output signal       */
-  /* 10    TXENB     UTOPIA transmit enable input/output signal      */
-  /* 9     TUPCLK    UTOPIA clock input/output signal                */
-  /* 8     MII-MDC   Used by MII in simult. MII and UTOPIA operation */
-  /* 7-4   UTPB[4:7] UTOPIA bus bit 4 - 7 input/output signals       */
-  /* 3     SOC       UTOPIA Start of cell input/output signal        */
-  /* 2               Reserved                                        */
-  /* 1               Enable UTOPIA mode                              */
-  /* 0               Enable SAR                                      */
-  /*-----------------------------------------------------------------*/
-  iop->iop_pdpar |= 0xDF7F; SYNC;
-  iop->iop_pddir &= 0x2080; SYNC;
-
-  /*-----------------------------------------------------------------*/
-  /* Port C - RxClav Signal                                          */
-  /*-----------------------------------------------------------------*/
-  iop->iop_pcpar  |= 0x0001; /* PCPAR[15] = 1 */
-  iop->iop_pcdir  &= 0xFFFE; /* PCDIR[15] = 0 */
-  iop->iop_pcso   &= 0xFFFE; /* PCSO[15]  = 0 */
-
-  if (flag)
-    enable_interrupts();
-}
diff --git a/board/siemens/IAD210/atm.h b/board/siemens/IAD210/atm.h
deleted file mode 100644
index cd5b45e..0000000
--- a/board/siemens/IAD210/atm.h
+++ /dev/null
@@ -1,287 +0,0 @@
-typedef unsigned char uint8;
-typedef unsigned short uint16;
-typedef unsigned int uint32;
-typedef volatile unsigned char vuint8;
-typedef volatile unsigned short vuint16;
-typedef volatile unsigned int vuint32;
-
-
-#define DPRAM_ATM CONFIG_SYS_IMMR + 0x3000
-
-#define ATM_DPRAM_BEGIN  (DPRAM_ATM - CONFIG_SYS_IMMR - 0x2000)
-#define NUM_CONNECTIONS  1
-#define SAR_RXB_SIZE     1584
-#define AM_HMASK         0x0FFFFFF0
-
-#define NUM_CT_ENTRIES           (NUM_CONNECTIONS)
-#define NUM_TCTE_ENTRIES         (NUM_CONNECTIONS)
-#define NUM_AM_ENTRIES           (NUM_CONNECTIONS+1)
-#define NUM_AP_ENTRIES           (NUM_CONNECTIONS+1)
-#define NUM_MPHYPT_ENTRIES       1
-#define NUM_APCP_ENTRIES         1
-#define NUM_APCT_PRIO_1_ENTRIES  146	/* Determines minimum rate */
-#define NUM_TQ_ENTRIES           12
-
-#define SIZE_OF_CT_ENTRY         64
-#define SIZE_OF_TCTE_ENTRY       32
-#define SIZE_OF_AM_ENTRY         4
-#define SIZE_OF_AP_ENTRY         2
-#define SIZE_OF_MPHYPT_ENTRY     2
-#define SIZE_OF_APCP_ENTRY       32
-#define SIZE_OF_APCT_ENTRY       2
-#define SIZE_OF_TQ_ENTRY         2
-
-#define CT_BASE           ((ATM_DPRAM_BEGIN + 63) & 0xFFC0)	/*64 */
-#define TCTE_BASE         (CT_BASE + NUM_CT_ENTRIES * SIZE_OF_CT_ENTRY)	/*32 */
-#define APCP_BASE         (TCTE_BASE + NUM_TCTE_ENTRIES * SIZE_OF_TCTE_ENTRY)	/*32 */
-#define AM_BEGIN          (APCP_BASE + NUM_APCP_ENTRIES * SIZE_OF_APCP_ENTRY)	/*4 */
-#define AM_BASE           (AM_BEGIN + (NUM_AM_ENTRIES - 1) * SIZE_OF_AM_ENTRY)
-#define AP_BEGIN          (AM_BEGIN + NUM_AM_ENTRIES * SIZE_OF_AM_ENTRY)	/*2 */
-#define AP_BASE           (AP_BEGIN + (NUM_AP_ENTRIES - 1) * SIZE_OF_AP_ENTRY)
-#define MPHYPT_BASE       (AP_BEGIN + NUM_AP_ENTRIES * SIZE_OF_AP_ENTRY)	/*2 */
-#define APCT_PRIO_1_BASE  (MPHYPT_BASE + NUM_MPHYPT_ENTRIES * SIZE_OF_MPHYPT_ENTRY)	/*2 */
-#define TQ_BASE           (APCT_PRIO_1_BASE + NUM_APCT_PRIO_1_ENTRIES * SIZE_OF_APCT_ENTRY)	/*2 */
-#define ATM_DPRAM_SIZE    ((TQ_BASE + NUM_TQ_ENTRIES * SIZE_OF_TQ_ENTRY) - ATM_DPRAM_BEGIN)
-
-#define CT_PTR(base)      ((struct ct_entry_t *)((char *)(base) + 0x2000 + CT_BASE))
-#define TCTE_PTR(base)    ((struct tcte_entry_t *)((char *)(base) + 0x2000 + TCTE_BASE))
-#define AM_PTR(base)      ((uint32 *)((char *)(base) + 0x2000 + AM_BASE))
-#define AP_PTR(base)      ((uint16 *)((char *)(base) + 0x2000 + AP_BASE))
-#define MPHYPT_PTR(base)  ((uint16 *)((char *)(base) + 0x2000 + MPHYPT_BASE))
-#define APCP_PTR(base)    ((struct apc_params_t *)((char*)(base) + 0x2000 + APCP_BASE))
-#define APCT1_PTR(base)   ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_1_BASE))
-#define APCT2_PTR(base)   ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_2_BASE))
-#define APCT3_PTR(base)   ((uint16 *)((char *)(base) + 0x2000 + APCT_PRIO_3_BASE))
-#define TQ_PTR(base)      ((uint16 *)((char *)(base) + 0x2000 + TQ_BASE))
-
-/* SAR registers */
-#define RBDBASE(base)	  ((vuint32 *)(base + 0x3F00))	/* Base address of RxBD-List */
-#define SRFCR(base)	  ((vuint8 *)(base + 0x3F04))	/* DMA Receive function code */
-#define SRSTATE(base)	  ((vuint8 *)(base + 0x3F05))	/* DMA Receive status */
-#define MRBLR(base)	  ((vuint16 *)(base + 0x3F06))	/* Init to 0 for ATM */
-#define RSTATE(base)	  ((vuint32 *)(base + 0x3F08))	/* Do not write to */
-#define R_CNT(base)	  ((vuint16 *)(base + 0x3F10))	/* Do not write to */
-#define STFCR(base)	  ((vuint8 *)(base + 0x3F12))	/* DMA Transmit function code */
-#define STSTATE(base)	  ((vuint8 *)(base + 0x3F13))	/* DMA Transmit status */
-#define TBDBASE(base)	  ((vuint32 *)(base + 0x3F14))	/* Base address of TxBD-List */
-#define TSTATE(base)	  ((vuint32 *)(base + 0x3F18))	/* Do not write to */
-#define COMM_CH(base)	  ((vuint16 *)(base + 0x3F1C))	/* Command channel */
-#define STCHNUM(base)	  ((vuint16 *)(base + 0x3F1E))	/* Do not write to */
-#define T_CNT(base)	  ((vuint16 *)(base + 0x3F20))	/* Do not write to */
-#define CTBASE(base)	  ((vuint16 *)(base + 0x3F22))	/* Base address of Connection-table */
-#define ECTBASE(base)	  ((vuint32 *)(base + 0x3F24))	/* Valid only for external Conn.-table */
-#define INTBASE(base)	  ((vuint32 *)(base + 0x3F28))	/* Base address of Interrupt-table */
-#define INTPTR(base)	  ((vuint32 *)(base + 0x3F2C))	/* Pointer to Interrupt-queue */
-#define C_MASK(base)	  ((vuint32 *)(base + 0x3F30))	/* CRC-mask */
-#define SRCHNUM(base)	  ((vuint16 *)(base + 0x3F34))	/* Do not write to */
-#define INT_CNT(base)	  ((vuint16 *)(base + 0x3F36))	/* Interrupt-Counter */
-#define INT_ICNT(base)	  ((vuint16 *)(base + 0x3F38))	/* Interrupt threshold */
-#define TSTA(base)	  ((vuint16 *)(base + 0x3F3A))	/* Time-stamp-address */
-#define OLDLEN(base)	  ((vuint16 *)(base + 0x3F3C))	/* Do not write to */
-#define SMRBLR(base)	  ((vuint16 *)(base + 0x3F3E))	/* SAR max RXBuffer length */
-#define EHEAD(base)	  ((vuint32 *)(base + 0x3F40))	/* Valid for serial mode */
-#define EPAYLOAD(base)	  ((vuint32 *)(base + 0x3F44))	/* Valid for serial mode */
-#define TQBASE(base)	  ((vuint16 *)(base + 0x3F48))	/* Base address of Tx queue */
-#define TQEND(base)	  ((vuint16 *)(base + 0x3F4A))	/* End address of Tx queue */
-#define TQAPTR(base)	  ((vuint16 *)(base + 0x3F4C))	/* TQ APC pointer */
-#define TQTPTR(base)	  ((vuint16 *)(base + 0x3F4E))	/* TQ Tx pointer */
-#define APCST(base)	  ((vuint16 *)(base + 0x3F50))	/* APC status */
-#define APCPTR(base)	  ((vuint16 *)(base + 0x3F52))	/* APC parameter pointer */
-#define HMASK(base)	  ((vuint32 *)(base + 0x3F54))	/* Header mask */
-#define AMBASE(base)	  ((vuint16 *)(base + 0x3F58))	/* Address match table base */
-#define AMEND(base)	  ((vuint16 *)(base + 0x3F5A))	/* Address match table end */
-#define APBASE(base)	  ((vuint16 *)(base + 0x3F5C))	/* Address match parameter */
-#define FLBASE(base)	  ((vuint32 *)(base + 0x3F54))	/* First-level table base */
-#define SLBASE(base)	  ((vuint32 *)(base + 0x3F58))	/* Second-level table base */
-#define FLMASK(base)	  ((vuint16 *)(base + 0x3F5C))	/* First-level mask */
-#define ECSIZE(base)	  ((vuint16 *)(base + 0x3F5E))	/* Valid for extended mode */
-#define APCT_REAL(base)	  ((vuint32 *)(base + 0x3F60))	/* APC 32 bit counter */
-#define R_PTR(base)	  ((vuint32 *)(base + 0x3F64))	/* Do not write to */
-#define RTEMP(base)	  ((vuint32 *)(base + 0x3F68))	/* Do not write to */
-#define T_PTR(base)	  ((vuint32 *)(base + 0x3F6C))	/* Do not write to */
-#define TTEMP(base)	  ((vuint32 *)(base + 0x3F70))	/* Do not write to */
-
-/* ESAR registers */
-#define FMCTIMESTMP(base) ((vuint32 *)(base + 0x3F80))	/* Perf.Mon.Timestamp */
-#define FMCTEMPLATE(base) ((vuint32 *)(base + 0x3F84))	/* Perf.Mon.Template */
-#define PMPTR(base)       ((vuint16 *)(base + 0x3F88))	/* Perf.Mon.Table */
-#define PMCHANNEL(base)	  ((vuint16 *)(base + 0x3F8A))	/* Perf.Mon.Channel */
-#define MPHYST(base)	  ((vuint16 *)(base + 0x3F90))	/* Multi-PHY Status */
-#define TCTEBASE(base)	  ((vuint16 *)(base + 0x3F92))	/* Internal TCT Extension Base */
-#define ETCTEBASE(base)	  ((vuint32 *)(base + 0x3F94))	/* External TCT Extension Base */
-#define COMM_CH2(base)	  ((vuint32 *)(base + 0x3F98))	/* 2nd command channel word */
-#define STATBASE(base)	  ((vuint16 *)(base + 0x3F9C))	/* Statistics table pointer */
-
-/* UTOPIA Mode Register */
-#define UTMODE(base)      (CAST(vuint32 *)(base + 0x0978))
-
-/* SAR commands */
-#define TRANSMIT_CHANNEL_ACTIVATE_CMD   0x0FC1
-#define TRANSMIT_CHANNEL_DEACTIVATE_CMD 0x1FC1
-#define STOP_TRANSMIT_CMD               0x2FC1
-#define RESTART_TRANSMIT_CMD            0x3FC1
-#define STOP_RECEIVE_CMD                0x4FC1
-#define RESTART_RECEIVE_CMD             0x5FC1
-#define APC_BYPASS_CMD                  0x6FC1
-#define MEM_WRITE_CMD                   0x7FC1
-#define CPCR_FLG                        0x0001
-
-/* INT flags */
-#define INT_VALID	0x80000000
-#define INT_WRAP	0x40000000
-#define INT_APCO	0x00800000
-#define INT_TQF		0x00200000
-#define INT_RXF		0x00080000
-#define INT_BSY		0x00040000
-#define INT_TXB		0x00020000
-#define INT_RXB		0x00010000
-
-#define NUM_INT_ENTRIES   80
-#define SIZE_OF_INT_ENTRY 4
-
-struct apc_params_t {
-	vuint16 apct_base1;	/* APC Table - First Priority Base pointer */
-	vuint16 apct_end1;	/* First APC Table - Length */
-	vuint16 apct_ptr1;	/* First APC Table Pointer */
-	vuint16 apct_sptr1;	/* APC Table First Priority Service pointer */
-	vuint16 etqbase;	/* Enhanced Transmit Queue Base pointer */
-	vuint16 etqend;		/* Enhanced Transmit Queue End pointer */
-	vuint16 etqaptr;	/* Enhanced Transmit Queue APC pointer */
-	vuint16 etqtptr;	/* Enhanced Transmit Queue Transmitter pointer */
-	vuint16 apc_mi;		/* APC - Max Iteration */
-	vuint16 ncits;		/* Number of Cells In TimeSlot  */
-	vuint16 apcnt;		/* APC - N Timer */
-	vuint16 reserved1;	/* reserved */
-	vuint16 eapcst;		/* APC status */
-	vuint16 ptp_counter;	/* PTP queue length */
-	vuint16 ptp_txch;	/* PTP channel */
-	vuint16 reserved2;	/* reserved */
-};
-
-struct ct_entry_t {
-	/* RCT */
-	unsigned fhnt:1;
-	unsigned pm_rct:1;
-	unsigned reserved0:6;
-	unsigned hec:1;
-	unsigned clp:1;
-	unsigned cng_ncrc:1;
-	unsigned inf_rct:1;
-	unsigned cngi_ptp:1;
-	unsigned cdis_rct:1;
-	unsigned aal_rct:2;
-	uint16 rbalen;
-	uint32 rcrc;
-	uint32 rb_ptr;
-	uint16 rtmlen;
-	uint16 rbd_ptr;
-	uint16 rbase;
-	uint16 tstamp;
-	uint16 imask;
-	unsigned ft:2;
-	unsigned nim:1;
-	unsigned reserved1:2;
-	unsigned rpmt:6;
-	unsigned reserved2:5;
-	uint8 reserved3[8];
-	/* TCT */
-	unsigned reserved4:1;
-	unsigned pm_tct:1;
-	unsigned reserved5:6;
-	unsigned pc:1;
-	unsigned reserved6:2;
-	unsigned inf_tct:1;
-	unsigned cr10:1;
-	unsigned cdis_tct:1;
-	unsigned aal_tct:2;
-	uint16 tbalen;
-	uint32 tcrc;
-	uint32 tb_ptr;
-	uint16 ttmlen;
-	uint16 tbd_ptr;
-	uint16 tbase;
-	unsigned reserved7:5;
-	unsigned tpmt:6;
-	unsigned reserved8:3;
-	unsigned avcf:1;
-	unsigned act:1;
-	uint32 chead;
-	uint16 apcl;
-	uint16 apcpr;
-	unsigned out:1;
-	unsigned bnr:1;
-	unsigned tservice:2;
-	unsigned apcp:12;
-	uint16 apcpf;
-};
-
-struct tcte_entry_t {
-	unsigned res1:4;
-	unsigned scr:12;
-	uint16 scrf;
-	uint16 bt;
-	uint16 buptrh;
-	uint32 buptrl;
-	unsigned vbr2:1;
-	unsigned res2:15;
-	uint16 oobr;
-	uint16 res3[8];
-};
-
-#define SIZE_OF_RBD  12
-#define SIZE_OF_TBD  12
-
-struct atm_bd_t {
-	vuint16 flags;
-	vuint16 length;
-	unsigned char *buffer_ptr;
-	vuint16 cpcs_uu_cpi;
-	vuint16 reserved;
-};
-
-/* BD flags */
-#define EMPTY		0x8000
-#define READY		0x8000
-#define WRAP		0x2000
-#define INTERRUPT	0x1000
-#define LAST		0x0800
-#define FIRST		0x0400
-#define OAM             0x0400
-#define CONTINUOUS	0x0200
-#define HEC_ERROR	0x0080
-#define CELL_LOSS	0x0040
-#define CONGESTION	0x0020
-#define ABORT		0x0010
-#define LEN_ERROR	0x0002
-#define CRC_ERROR	0x0001
-
-struct atm_connection_t {
-	struct atm_bd_t *rbd_ptr;
-	int num_rbd;
-	struct atm_bd_t *tbd_ptr;
-	int num_tbd;
-	struct ct_entry_t *ct_ptr;
-	struct tcte_entry_t *tcte_ptr;
-	void *drv;
-	void (*notify) (void *drv, int event);
-};
-
-struct atm_driver_t {
-	int loaded;
-	int started;
-	char *csram;
-	int csram_size;
-	uint32 *am_top;
-	uint16 *ap_top;
-	uint32 *int_reload_ptr;
-	uint32 *int_serv_ptr;
-	struct atm_bd_t *rbd_base_ptr;
-	struct atm_bd_t *tbd_base_ptr;
-	unsigned linerate_in_bps;
-};
-
-extern struct atm_connection_t g_conn[NUM_CONNECTIONS];
-extern struct atm_driver_t g_atm;
-
-extern int atmLoad (void);
-extern void atmUnload (void);
diff --git a/board/siemens/IAD210/flash.c b/board/siemens/IAD210/flash.c
deleted file mode 100644
index c262e0f..0000000
--- a/board/siemens/IAD210/flash.c
+++ /dev/null
@@ -1,502 +0,0 @@
-/*
- * (C) Copyright 2000, 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-  volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-  volatile memctl8xx_t *memctl = &immap->im_memctl;
-  unsigned long size;
-  int i;
-
-  /* Init: no FLASHes known */
-  for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-    flash_info[i].flash_id = FLASH_UNKNOWN;
-  }
-
-  /* Static FLASH Bank configuration here - FIXME XXX */
-
-  size = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-  if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-    printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size, size<<20);
-  }
-
-
-  /* Remap FLASH according to real size */
-  memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size & 0xFFFF8000);
-  memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
-  /* Re-do sizing to get full correct info */
-  size = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-  flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-  flash_info[0].size = size;
-
-  return (size);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-  int i;
-
-  /* set up sector start address table */
-  if (info->flash_id & FLASH_BTYPE) {
-    /* set sector offsets for bottom boot block type	*/
-    info->start[0] = base + 0x00000000;
-    info->start[1] = base + 0x00008000;
-    info->start[2] = base + 0x0000C000;
-    info->start[3] = base + 0x00010000;
-    for (i = 4; i < info->sector_count; i++) {
-      info->start[i] = base + (i * 0x00020000) - 0x00060000;
-    }
-  } else {
-    /* set sector offsets for top boot block type		*/
-    i = info->sector_count - 1;
-    info->start[i--] = base + info->size - 0x00008000;
-    info->start[i--] = base + info->size - 0x0000C000;
-    info->start[i--] = base + info->size - 0x00010000;
-    for (; i >= 0; i--) {
-      info->start[i] = base + i * 0x00020000;
-    }
-  }
-
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-  int i;
-
-  if (info->flash_id == FLASH_UNKNOWN) {
-    printf ("missing or unknown FLASH type\n");
-    return;
-  }
-
-  switch (info->flash_id & FLASH_VENDMASK) {
-  case FLASH_MAN_AMD:	printf ("AMD ");		break;
-  case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-  default:		printf ("Unknown Vendor ");	break;
-  }
-
-  switch (info->flash_id & FLASH_TYPEMASK) {
-  case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-    break;
-  case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-    break;
-  case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-    break;
-  case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-    break;
-  case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-    break;
-  case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-    break;
-  case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-    break;
-  case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-    break;
-  default:		printf ("Unknown Chip Type\n");
-    break;
-  }
-
-  printf ("  Size: %ld MB in %d Sectors\n",
-	  info->size >> 20, info->sector_count);
-
-  printf ("  Sector Start Addresses:");
-  for (i=0; i<info->sector_count; ++i) {
-    if ((i % 5) == 0)
-      printf ("\n   ");
-    printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-	    );
-  }
-  printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-  short i;
-  ulong value;
-  ulong base = (ulong)addr;
-
-
-  /* Write auto select command: read Manufacturer ID */
-  addr[0x0555] = 0x00AA00AA;
-  addr[0x02AA] = 0x00550055;
-  addr[0x0555] = 0x00900090;
-
-  value = addr[0];
-
-  switch (value) {
-  case AMD_MANUFACT:
-    info->flash_id = FLASH_MAN_AMD;
-    break;
-  case FUJ_MANUFACT:
-    info->flash_id = FLASH_MAN_FUJ;
-    break;
-  default:
-    info->flash_id = FLASH_UNKNOWN;
-    info->sector_count = 0;
-    info->size = 0;
-    return (0);			/* no or unknown flash	*/
-  }
-
-  value = addr[1];			/* device ID		*/
-
-  switch (value) {
-  case AMD_ID_LV400T:
-    info->flash_id += FLASH_AM400T;
-    info->sector_count = 11;
-    info->size = 0x00100000;
-    break;				/* => 1 MB		*/
-
-  case AMD_ID_LV400B:
-    info->flash_id += FLASH_AM400B;
-    info->sector_count = 11;
-    info->size = 0x00100000;
-    break;				/* => 1 MB		*/
-
-  case AMD_ID_LV800T:
-    info->flash_id += FLASH_AM800T;
-    info->sector_count = 19;
-    info->size = 0x00200000;
-    break;				/* => 2 MB		*/
-
-  case AMD_ID_LV800B:
-    info->flash_id += FLASH_AM800B;
-    info->sector_count = 19;
-    info->size = 0x00200000;
-    break;				/* => 2 MB		*/
-
-  case AMD_ID_LV160T:
-    info->flash_id += FLASH_AM160T;
-    info->sector_count = 35;
-    info->size = 0x00400000;
-    break;				/* => 4 MB		*/
-
-  case AMD_ID_LV160B:
-    info->flash_id += FLASH_AM160B;
-    info->sector_count = 35;
-    info->size = 0x00400000;
-    break;				/* => 4 MB		*/
-#if 0	/* enable when device IDs are available */
-  case AMD_ID_LV320T:
-    info->flash_id += FLASH_AM320T;
-    info->sector_count = 67;
-    info->size = 0x00800000;
-    break;				/* => 8 MB		*/
-
-  case AMD_ID_LV320B:
-    info->flash_id += FLASH_AM320B;
-    info->sector_count = 67;
-    info->size = 0x00800000;
-    break;				/* => 8 MB		*/
-#endif
-  default:
-    info->flash_id = FLASH_UNKNOWN;
-    return (0);			/* => no or unknown flash */
-
-  }
-
-  /* set up sector start address table */
-  if (info->flash_id & FLASH_BTYPE) {
-    /* set sector offsets for bottom boot block type	*/
-    info->start[0] = base + 0x00000000;
-    info->start[1] = base + 0x00008000;
-    info->start[2] = base + 0x0000C000;
-    info->start[3] = base + 0x00010000;
-    for (i = 4; i < info->sector_count; i++) {
-      info->start[i] = base + (i * 0x00020000) - 0x00060000;
-    }
-  } else {
-    /* set sector offsets for top boot block type		*/
-    i = info->sector_count - 1;
-    info->start[i--] = base + info->size - 0x00008000;
-    info->start[i--] = base + info->size - 0x0000C000;
-    info->start[i--] = base + info->size - 0x00010000;
-    for (; i >= 0; i--) {
-      info->start[i] = base + i * 0x00020000;
-    }
-  }
-
-  /* check for protected sectors */
-  for (i = 0; i < info->sector_count; i++) {
-    /* read sector protection at sector address, (A7 .. A0) = 0x02 */
-    /* D0 = 1 if protected */
-    addr = (volatile unsigned long *)(info->start[i]);
-    info->protect[i] = addr[2] & 1;
-  }
-
-  /*
-   * Prevent writes to uninitialized FLASH.
-   */
-  if (info->flash_id != FLASH_UNKNOWN) {
-    addr = (volatile unsigned long *)info->start[0];
-
-    *addr = 0x00F000F0;	/* reset bank */
-  }
-
-  return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-  vu_long *addr = (vu_long*)(info->start[0]);
-  int flag, prot, sect, l_sect;
-  ulong start, now, last;
-
-  if ((s_first < 0) || (s_first > s_last)) {
-    if (info->flash_id == FLASH_UNKNOWN) {
-      printf ("- missing\n");
-    } else {
-      printf ("- no sectors to erase\n");
-    }
-    return 1;
-  }
-
-  if ((info->flash_id == FLASH_UNKNOWN) ||
-      (info->flash_id > FLASH_AMD_COMP)) {
-    printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-    return 1;
-  }
-
-  prot = 0;
-  for (sect=s_first; sect<=s_last; ++sect) {
-    if (info->protect[sect]) {
-      prot++;
-    }
-  }
-
-  if (prot) {
-    printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-  } else {
-    printf ("\n");
-  }
-
-  l_sect = -1;
-
-  /* Disable interrupts which might cause a timeout here */
-  flag = disable_interrupts();
-
-  addr[0x0555] = 0x00AA00AA;
-  addr[0x02AA] = 0x00550055;
-  addr[0x0555] = 0x00800080;
-  addr[0x0555] = 0x00AA00AA;
-  addr[0x02AA] = 0x00550055;
-
-  /* Start erase on unprotected sectors */
-  for (sect = s_first; sect<=s_last; sect++) {
-    if (info->protect[sect] == 0) {	/* not protected */
-      addr = (vu_long*)(info->start[sect]);
-      addr[0] = 0x00300030;
-      l_sect = sect;
-    }
-  }
-
-  /* re-enable interrupts if necessary */
-  if (flag)
-    enable_interrupts();
-
-  /* wait at least 80us - let's wait 1 ms */
-  udelay (1000);
-
-  /*
-   * We wait for the last triggered sector
-   */
-  if (l_sect < 0)
-    goto DONE;
-
-  start = get_timer (0);
-  last  = start;
-  addr = (vu_long*)(info->start[l_sect]);
-  while ((addr[0] & 0x00800080) != 0x00800080) {
-    if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-      printf ("Timeout\n");
-      return 1;
-    }
-    /* show that we're waiting */
-    if ((now - last) > 1000) {	/* every second */
-      putc ('.');
-      last = now;
-    }
-  }
-
- DONE:
-  /* reset to read mode */
-  addr = (volatile unsigned long *)info->start[0];
-  addr[0] = 0x00F000F0;	/* reset bank */
-
-  printf (" done\n");
-  return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-  ulong cp, wp, data;
-  int i, l, rc;
-
-  wp = (addr & ~3);	/* get lower word aligned address */
-
-  /*
-   * handle unaligned start bytes
-   */
-  if ((l = addr - wp) != 0) {
-    data = 0;
-    for (i=0, cp=wp; i<l; ++i, ++cp) {
-      data = (data << 8) | (*(uchar *)cp);
-    }
-    for (; i<4 && cnt>0; ++i) {
-      data = (data << 8) | *src++;
-      --cnt;
-      ++cp;
-    }
-    for (; cnt==0 && i<4; ++i, ++cp) {
-      data = (data << 8) | (*(uchar *)cp);
-    }
-
-    if ((rc = write_word(info, wp, data)) != 0) {
-      return (rc);
-    }
-    wp += 4;
-  }
-
-  /*
-   * handle word aligned part
-   */
-  while (cnt >= 4) {
-    data = 0;
-    for (i=0; i<4; ++i) {
-      data = (data << 8) | *src++;
-    }
-    if ((rc = write_word(info, wp, data)) != 0) {
-      return (rc);
-    }
-    wp  += 4;
-    cnt -= 4;
-  }
-
-  if (cnt == 0) {
-    return (0);
-  }
-
-  /*
-   * handle unaligned tail bytes
-   */
-  data = 0;
-  for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-    data = (data << 8) | *src++;
-    --cnt;
-  }
-  for (; i<4; ++i, ++cp) {
-    data = (data << 8) | (*(uchar *)cp);
-  }
-
-  return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-  vu_long *addr = (vu_long*)(info->start[0]);
-  ulong start;
-  int flag;
-
-  /* Check if Flash is (sufficiently) erased */
-  if ((*((vu_long *)dest) & data) != data) {
-    return (2);
-  }
-  /* Disable interrupts which might cause a timeout here */
-  flag = disable_interrupts();
-
-  addr[0x0555] = 0x00AA00AA;
-  addr[0x02AA] = 0x00550055;
-  addr[0x0555] = 0x00A000A0;
-
-  *((vu_long *)dest) = data;
-
-  /* re-enable interrupts if necessary */
-  if (flag)
-    enable_interrupts();
-
-  /* data polling for D7 */
-  start = get_timer (0);
-  while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-    if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-      return (1);
-    }
-  }
-  return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/siemens/IAD210/u-boot.lds b/board/siemens/IAD210/u-boot.lds
deleted file mode 100644
index 0e78e4f..0000000
--- a/board/siemens/IAD210/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * (C) Copyright 2000-2010
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/libmpc8xx.o	(.text*)
-    net/libnet.o			(.text*)
-    drivers/rtc/librtc.o		(.text*)
-
-    . = env_offset;
-    common/env_embedded.o		(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end__ = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/siemens/SCM/Makefile b/board/siemens/SCM/Makefile
deleted file mode 100644
index 07db9d4..0000000
--- a/board/siemens/SCM/Makefile
+++ /dev/null
@@ -1,49 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-ifneq ($(OBJTREE),$(SRCTREE))
-$(shell mkdir -p $(obj)../common $(obj)../../tqc/tqm8xx)
-endif
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= scm.o flash.o fpga_scm.o ../common/fpga.o \
-	  ../../tqc/tqm8xx/load_sernum_ethaddr.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/siemens/SCM/flash.c b/board/siemens/SCM/flash.c
deleted file mode 100644
index 4a6d538..0000000
--- a/board/siemens/SCM/flash.c
+++ /dev/null
@@ -1,488 +0,0 @@
-/*
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * Flash Routines for AMD devices on the TQM8260 board
- *
- *--------------------------------------------------------------------
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-#define V_ULONG(a)	(*(volatile unsigned long *)( a ))
-#define V_BYTE(a)	(*(volatile unsigned char *)( a ))
-
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-
-/*-----------------------------------------------------------------------
- */
-void flash_reset (void)
-{
-	if (flash_info[0].flash_id != FLASH_UNKNOWN) {
-		V_ULONG (flash_info[0].start[0]) = 0x00F000F0;
-		V_ULONG (flash_info[0].start[0] + 4) = 0x00F000F0;
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-ulong flash_get_size (ulong baseaddr, flash_info_t * info)
-{
-	short i;
-	unsigned long flashtest_h, flashtest_l;
-
-	/* Write auto select command sequence and test FLASH answer */
-	V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (baseaddr + ((ulong) 0x02AA << 3)) = 0x00550055;
-	V_ULONG (baseaddr + ((ulong) 0x0555 << 3)) = 0x00900090;
-	V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (baseaddr + 4 + ((ulong) 0x02AA << 3)) = 0x00550055;
-	V_ULONG (baseaddr + 4 + ((ulong) 0x0555 << 3)) = 0x00900090;
-
-	flashtest_h = V_ULONG (baseaddr);	/* manufacturer ID     */
-	flashtest_l = V_ULONG (baseaddr + 4);
-
-	switch ((int) flashtest_h) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash     */
-	}
-
-	flashtest_h = V_ULONG (baseaddr + 8);	/* device ID           */
-	flashtest_l = V_ULONG (baseaddr + 12);
-	if (flashtest_h != flashtest_l) {
-		info->flash_id = FLASH_UNKNOWN;
-	} else {
-		switch (flashtest_h) {
-		case AMD_ID_LV800T:
-			info->flash_id += FLASH_AM800T;
-			info->sector_count = 19;
-			info->size = 0x00400000;
-			break;			/* 4 * 1 MB = 4 MB  */
-		case AMD_ID_LV800B:
-			info->flash_id += FLASH_AM800B;
-			info->sector_count = 19;
-			info->size = 0x00400000;
-			break;			/* 4 * 1 MB = 4 MB  */
-		case AMD_ID_LV160T:
-			info->flash_id += FLASH_AM160T;
-			info->sector_count = 35;
-			info->size = 0x00800000;
-			break;			/* 4 * 2 MB = 8 MB  */
-		case AMD_ID_LV160B:
-			info->flash_id += FLASH_AM160B;
-			info->sector_count = 35;
-			info->size = 0x00800000;
-			break;			/* 4 * 2 MB = 8 MB  */
-		case AMD_ID_DL322T:
-			info->flash_id += FLASH_AMDL322T;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_DL322B:
-			info->flash_id += FLASH_AMDL322B;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_DL323T:
-			info->flash_id += FLASH_AMDL323T;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_DL323B:
-			info->flash_id += FLASH_AMDL323B;
-			info->sector_count = 71;
-			info->size = 0x01000000;
-			break;			/* 4 * 4 MB = 16 MB */
-		case AMD_ID_LV640U:
-			info->flash_id += FLASH_AM640U;
-			info->sector_count = 128;
-			info->size = 0x02000000;
-			break;			/* 4 * 8 MB = 32 MB */
-		default:
-			info->flash_id = FLASH_UNKNOWN;
-			return (0);		/* no or unknown flash     */
-		}
-	}
-
-	if (flashtest_h == AMD_ID_LV640U) {
-
-		/* set up sector start adress table (uniform sector type) */
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = baseaddr + (i * 0x00040000);
-
-	} else if (info->flash_id & FLASH_BTYPE) {
-
-		/* set up sector start adress table (bottom sector type) */
-		info->start[0] = baseaddr + 0x00000000;
-		info->start[1] = baseaddr + 0x00010000;
-		info->start[2] = baseaddr + 0x00018000;
-		info->start[3] = baseaddr + 0x00020000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = baseaddr + (i * 0x00040000) - 0x000C0000;
-		}
-
-	} else {
-
-		/* set up sector start adress table (top sector type) */
-		i = info->sector_count - 1;
-		info->start[i--] = baseaddr + info->size - 0x00010000;
-		info->start[i--] = baseaddr + info->size - 0x00018000;
-		info->start[i--] = baseaddr + info->size - 0x00020000;
-		for (; i >= 0; i--) {
-			info->start[i] = baseaddr + i * 0x00040000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		if ((V_ULONG (info->start[i] + 16) & 0x00010001) ||
-			(V_ULONG (info->start[i] + 20) & 0x00010001)) {
-			info->protect[i] = 1;	/* D0 = 1 if protected */
-		} else {
-			info->protect[i] = 0;
-		}
-	}
-
-	flash_reset ();
-	return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-unsigned long flash_init (void)
-{
-	unsigned long size_b0 = 0;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here (only one bank) */
-
-	size_b0 = flash_get_size (CONFIG_SYS_FLASH0_BASE, &flash_info[0]);
-	if (flash_info[0].flash_id == FLASH_UNKNOWN || size_b0 == 0) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-				size_b0, size_b0 >> 20);
-	}
-
-	/*
-	 * protect monitor and environment sectors
-	 */
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH0_BASE
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_MONITOR_BASE,
-		       CONFIG_SYS_MONITOR_BASE + monitor_flash_len - 1, &flash_info[0]);
-#endif
-
-#if defined(CONFIG_ENV_IS_IN_FLASH) && defined(CONFIG_ENV_ADDR)
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
-# endif
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_ENV_ADDR,
-		       CONFIG_ENV_ADDR + CONFIG_ENV_SIZE - 1, &flash_info[0]);
-#endif
-
-	return (size_b0);
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:
-		printf ("AMD ");
-		break;
-	case FLASH_MAN_FUJ:
-		printf ("FUJITSU ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM800T:
-		printf ("29LV800T (8 M, top sector)\n");
-		break;
-	case FLASH_AM800B:
-		printf ("29LV800T (8 M, bottom sector)\n");
-		break;
-	case FLASH_AM160T:
-		printf ("29LV160T (16 M, top sector)\n");
-		break;
-	case FLASH_AM160B:
-		printf ("29LV160B (16 M, bottom sector)\n");
-		break;
-	case FLASH_AMDL322T:
-		printf ("29DL322T (32 M, top sector)\n");
-		break;
-	case FLASH_AMDL322B:
-		printf ("29DL322B (32 M, bottom sector)\n");
-		break;
-	case FLASH_AMDL323T:
-		printf ("29DL323T (32 M, top sector)\n");
-		break;
-	case FLASH_AMDL323B:
-		printf ("29DL323B (32 M, bottom sector)\n");
-		break;
-	case FLASH_AM640U:
-		printf ("29LV640D (64 M, uniform sector)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-			info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect])
-			prot++;
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00800080;
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00800080;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
-	udelay (1000);
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			V_ULONG (info->start[sect]) = 0x00300030;
-			V_ULONG (info->start[sect] + 4) = 0x00300030;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last = start;
-	while ((V_ULONG (info->start[l_sect]) & 0x00800080) != 0x00800080 ||
-	       (V_ULONG (info->start[l_sect] + 4) & 0x00800080) != 0x00800080)
-	{
-		if ((now = get_timer (start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			serial_putc ('.');
-			last = now;
-		}
-	}
-
-  DONE:
-	/* reset to read mode */
-	flash_reset ();
-
-	printf (" done\n");
-	return 0;
-}
-
-static int write_dword (flash_info_t *, ulong, unsigned char *);
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong dp;
-	static unsigned char bb[8];
-	int i, l, rc, cc = cnt;
-
-	dp = (addr & ~7);		/* get lower dword aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - dp) != 0) {
-		for (i = 0; i < 8; i++)
-			bb[i] = (i < l || (i - l) >= cc) ? V_BYTE (dp + i) : *src++;
-		if ((rc = write_dword (info, dp, bb)) != 0) {
-			return (rc);
-		}
-		dp += 8;
-		cc -= 8 - l;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cc >= 8) {
-		if ((rc = write_dword (info, dp, src)) != 0) {
-			return (rc);
-		}
-		dp += 8;
-		src += 8;
-		cc -= 8;
-	}
-
-	if (cc <= 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	for (i = 0; i < 8; i++) {
-		bb[i] = (i < cc) ? *src++ : V_BYTE (dp + i);
-	}
-	return (write_dword (info, dp, bb));
-}
-
-/*-----------------------------------------------------------------------
- * Write a dword to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_dword (flash_info_t * info, ulong dest, unsigned char *pdata)
-{
-	ulong start, cl, ch;
-	int flag, i;
-
-	for (ch = 0, i = 0; i < 4; i++)
-		ch = (ch << 8) + *pdata++;	/* high word    */
-	for (cl = 0, i = 0; i < 4; i++)
-		cl = (cl << 8) + *pdata++;	/* low word */
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *) dest) & ch) != ch
-		|| (*((vu_long *) (dest + 4)) & cl) != cl) {
-		return (2);
-	}
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + (0x0555 << 3)) = 0x00A000A0;
-	V_ULONG (dest) = ch;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00AA00AA;
-	V_ULONG (info->start[0] + 4 + (0x02AA << 3)) = 0x00550055;
-	V_ULONG (info->start[0] + 4 + (0x0555 << 3)) = 0x00A000A0;
-	V_ULONG (dest + 4) = cl;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while (((V_ULONG (dest) & 0x00800080) != (ch & 0x00800080)) ||
-		   ((V_ULONG (dest + 4) & 0x00800080) != (cl & 0x00800080))) {
-		if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
diff --git a/board/siemens/SCM/fpga_scm.c b/board/siemens/SCM/fpga_scm.c
deleted file mode 100644
index acd9c15..0000000
--- a/board/siemens/SCM/fpga_scm.c
+++ /dev/null
@@ -1,104 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <mpc8260.h>
-#include <common.h>
-#include "../common/fpga.h"
-
-fpga_t fpga_list[] = {
-	{"FIOX", CONFIG_SYS_FIOX_BASE,
-	 CONFIG_SYS_PD_FIOX_INIT, CONFIG_SYS_PD_FIOX_PROG, CONFIG_SYS_PD_FIOX_DONE}
-	,
-	{"FDOHM", CONFIG_SYS_FDOHM_BASE,
-	 CONFIG_SYS_PD_FDOHM_INIT, CONFIG_SYS_PD_FDOHM_PROG, CONFIG_SYS_PD_FDOHM_DONE}
-};
-int fpga_count = sizeof (fpga_list) / sizeof (fpga_t);
-
-
-ulong fpga_control (fpga_t * fpga, int cmd)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-
-	switch (cmd) {
-	case FPGA_INIT_IS_HIGH:
-		immr->im_ioport.iop_pdird &= ~fpga->init_mask;	/* input */
-		return (immr->im_ioport.iop_pdatd & fpga->init_mask) ? 1 : 0;
-
-	case FPGA_INIT_SET_LOW:
-		immr->im_ioport.iop_pdird |= fpga->init_mask;	/* output */
-		immr->im_ioport.iop_pdatd &= ~fpga->init_mask;
-		break;
-
-	case FPGA_INIT_SET_HIGH:
-		immr->im_ioport.iop_pdird |= fpga->init_mask;	/* output */
-		immr->im_ioport.iop_pdatd |= fpga->init_mask;
-		break;
-
-	case FPGA_PROG_SET_LOW:
-		immr->im_ioport.iop_pdatd &= ~fpga->prog_mask;
-		break;
-
-	case FPGA_PROG_SET_HIGH:
-		immr->im_ioport.iop_pdatd |= fpga->prog_mask;
-		break;
-
-	case FPGA_DONE_IS_HIGH:
-		return (immr->im_ioport.iop_pdatd & fpga->done_mask) ? 1 : 0;
-
-	case FPGA_READ_MODE:
-		break;
-
-	case FPGA_LOAD_MODE:
-		break;
-
-	case FPGA_GET_ID:
-		if (fpga->conf_base == CONFIG_SYS_FIOX_BASE) {
-			ulong ver =
-				*(volatile ulong *) (fpga->conf_base + 0x10);
-			return ((ver >> 10) & 0xf) + ((ver >> 2) & 0xf0);
-		} else if (fpga->conf_base == CONFIG_SYS_FDOHM_BASE) {
-			return (*(volatile ushort *) fpga->conf_base) & 0xff;
-		} else {
-			return *(volatile ulong *) fpga->conf_base;
-		}
-
-	case FPGA_INIT_PORTS:
-		immr->im_ioport.iop_ppard &= ~fpga->init_mask;	/* INIT I/O */
-		immr->im_ioport.iop_psord &= ~fpga->init_mask;
-		immr->im_ioport.iop_pdird &= ~fpga->init_mask;
-
-		immr->im_ioport.iop_ppard &= ~fpga->prog_mask;	/* PROG Output */
-		immr->im_ioport.iop_psord &= ~fpga->prog_mask;
-		immr->im_ioport.iop_pdird |= fpga->prog_mask;
-
-		immr->im_ioport.iop_ppard &= ~fpga->done_mask;	/* DONE Input */
-		immr->im_ioport.iop_psord &= ~fpga->done_mask;
-		immr->im_ioport.iop_pdird &= ~fpga->done_mask;
-
-		break;
-
-	}
-	return 0;
-}
diff --git a/board/siemens/SCM/scm.c b/board/siemens/SCM/scm.c
deleted file mode 100644
index 461b56e..0000000
--- a/board/siemens/SCM/scm.c
+++ /dev/null
@@ -1,541 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <ioports.h>
-#include <mpc8260.h>
-#include <linux/compiler.h>
-
-#include "scm.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void config_scoh_cs(void);
-extern int  fpga_init(void);
-
-#if 0
-#define DEBUGF(fmt,args...)   printf (fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-
-/*
- * I/O Port configuration table
- *
- * if conf is 1, then that port pin will be configured at boot time
- * according to the five values podr/pdir/ppar/psor/pdat for that entry
- */
-
-const iop_conf_t iop_conf_tab[4][32] = {
-
-    /* Port A configuration */
-    {	/*	      conf ppar psor pdir podr pdat */
-	/* PA31 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII COL */
-	/* PA30 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII CRS */
-	/* PA29 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_ER */
-	/* PA28 */ {   1,   1,   1,   1,   0,   0   }, /* FCC1 MII TX_EN */
-	/* PA27 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_DV */
-	/* PA26 */ {   1,   1,   1,   0,   0,   0   }, /* FCC1 MII RX_ER */
-	/* PA25 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA24 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA23 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA22 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA21 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[3] */
-	/* PA20 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[2] */
-	/* PA19 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[1] */
-	/* PA18 */ {   1,   1,   0,   1,   0,   0   }, /* FCC1 MII TxD[0] */
-	/* PA17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[0] */
-	/* PA16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[1]*/
-	/* PA15 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[2] */
-	/* PA14 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RxD[3] */
-	/* PA13 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA12 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA11 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA10 */ {   0,   0,   0,   1,   0,   0   },
-	/* PA9  */ {   1,   1,   1,   1,   0,   0   }, /* TDM_A1 L1TXD0 */
-	/* PA8  */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A1 L1RXD0 */
-	/* PA7  */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A1 L1TSYNC */
-	/* PA6  */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A1 L1RSYNC */
-	/* PA5  */ {   1,   0,   0,   0,   0,   0   }, /* FIOX_FPGA_PR */
-	/* PA4  */ {   1,   0,   0,   0,   0,   0   }, /* DOHM_FPGA_PR */
-	/* PA3  */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK4 */
-	/* PA2  */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK4 */
-	/* PA1  */ {   0,   0,   0,   1,   0,   0   },
-	/* PA0  */ {   1,   0,   0,   0,   0,   0   }  /* BUSY */
-    },
-
-    /* Port B configuration */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PB31 */ {   1,   0,   0,   1,   0,   0   }, /* EQ_ALARM_MIN */
-	/* PB30 */ {   1,   0,   0,   1,   0,   0   }, /* EQ_ALARM_MAJ */
-	/* PB29 */ {   1,   0,   0,   1,   0,   0   }, /* COM_ALARM_MIN */
-	/* PB28 */ {   1,   0,   0,   1,   0,   0   }, /* COM_ALARM_MAJ */
-	/* PB27 */ {   0,   1,   0,   0,   0,   0   },
-	/* PB26 */ {   0,   1,   0,   0,   0,   0   },
-	/* PB25 */ {   1,   0,   0,   1,   0,   0   }, /* LED_GREEN_L */
-	/* PB24 */ {   1,   0,   0,   1,   0,   0   }, /* LED_RED_L */
-	/* PB23 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1TXD */
-	/* PB22 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1RXD */
-	/* PB21 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1TSYNC */
-	/* PB20 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_D2 L1RSYNC */
-	/* PB19 */ {   1,   0,   0,   0,   0,   0   }, /* UID */
-	/* PB18 */ {   0,   1,   0,   0,   0,   0   },
-	/* PB17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_DV */
-	/* PB16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_ER */
-	/* PB15 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_ER */
-	/* PB14 */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TX_EN */
-	/* PB13 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII COL */
-	/* PB12 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII CRS */
-	/* PB11 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[3] */
-	/* PB10 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[2] */
-	/* PB9  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[1] */
-	/* PB8  */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RxD[0] */
-	/* PB7  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[3] */
-	/* PB6  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[2] */
-	/* PB5  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[1] */
-	/* PB4  */ {   1,   1,   0,   1,   0,   0   }, /* FCC3 MII TxD[0] */
-	/* PB3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PB0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    },
-
-    /* Port C configuration */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PC31 */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK1 */
-	/* PC30 */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK1 */
-	/* PC29 */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK3 */
-	/* PC28 */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK3 */
-	/* PC27 */ {   1,   1,   0,   0,   0,   0   }, /* TDM RXCLK2 */
-	/* PC26 */ {   1,   1,   0,   0,   0,   0   }, /* TDM TXCLK2 */
-	/* PC25 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC24 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC23 */ {   0,   1,   0,   1,   0,   0   },
-	/* PC22 */ {   0,   1,   0,   0,   0,   0   },
-	/* PC21 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII TX_CLK */
-	/* PC20 */ {   1,   1,   0,   0,   0,   0   }, /* FCC1 MII RX_CLK */
-	/* PC19 */ {   0,   1,   0,   0,   0,   0   },
-	/* PC18 */ {   0,   1,   0,   0,   0,   0   },
-	/* PC17 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII RX_CLK */
-	/* PC16 */ {   1,   1,   0,   0,   0,   0   }, /* FCC3 MII TX_CLK */
-	/* PC15 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC14 */ {   0,   1,   0,   0,   0,   0   },
-	/* PC13 */ {   0,   0,   0,   1,   0,   0   }, /* RES_PHY_L */
-	/* PC12 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC11 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC10 */ {   0,   0,   0,   1,   0,   0   },
-	/* PC9  */ {   0,   1,   1,   0,   0,   0   }, /* TDM_A2 L1TSYNC */
-	/* PC8  */ {   0,   0,   0,   0,   0,   0   }, /* FEP_RDY */
-	/* PC7  */ {   0,   0,   0,   0,   0,   0   },
-	/* PC6  */ {   0,   0,   0,   0,   0,   0   }, /* UC4_ALARM_L */
-	/* PC5  */ {   0,   0,   0,   0,   0,   0   }, /* UC3_ALARM_L */
-	/* PC4  */ {   0,   0,   0,   0,   0,   0   }, /* UC2_ALARM_L */
-	/* PC3  */ {   0,   0,   0,   1,   0,   0   }, /* RES_MISC_L */
-	/* PC2  */ {   0,   0,   0,   1,   0,   0   }, /* RES_OH_L */
-	/* PC1  */ {   0,   0,   0,   1,   0,   0   }, /* RES_DOHM_L */
-	/* PC0  */ {   0,   0,   0,   1,   0,   0   }, /* RES_FIOX_L */
-    },
-
-    /* Port D configuration */
-    {   /*	      conf ppar psor pdir podr pdat */
-	/* PD31 */ {   1,   1,   0,   0,   0,   0   }, /* SCC1 EN RxD */
-	/* PD30 */ {   1,   1,   1,   1,   0,   0   }, /* SCC1 EN TxD */
-	/* PD29 */ {   0,   0,   0,   0,   0,   0   }, /* INIT_F */
-	/* PD28 */ {   0,   0,   0,   1,   0,   0   }, /* DONE_F */
-	/* PD27 */ {   0,   0,   0,   0,   0,   0   }, /* INIT_D */
-	/* PD26 */ {   0,   0,   0,   1,   0,   0   }, /* DONE_D */
-	/* PD25 */ {   0,   0,   0,   1,   0,   0   },
-	/* PD24 */ {   0,   0,   0,   1,   0,   0   },
-	/* PD23 */ {   0,   0,   0,   1,   0,   0   },
-	/* PD22 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A2 L1TXD */
-	/* PD21 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A2 L1RXD */
-	/* PD20 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_A2 L1RSYNC */
-	/* PD19 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPISEL */
-	/* PD18 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPICLK */
-	/* PD17 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPIMOSI */
-	/* PD16 */ {   1,   1,   1,   0,   0,   0   }, /* SPI SPIMOSO */
-#if defined(CONFIG_SOFT_I2C)
-	/* PD15 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SDA */
-	/* PD14 */ {   1,   0,   0,   1,   1,   1   }, /* I2C SCL */
-#else
-#if defined(CONFIG_HARD_I2C)
-	/* PD15 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   1,   1,   1,   0,   1,   0   }, /* I2C SCL */
-#else /* normal I/O port pins */
-	/* PD15 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SDA */
-	/* PD14 */ {   0,   1,   1,   0,   1,   0   }, /* I2C SCL */
-#endif
-#endif
-	/* PD13 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1TXD */
-	/* PD12 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1RXD */
-	/* PD11 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1TSYNC */
-	/* PD10 */ {   1,   1,   1,   0,   0,   0   }, /* TDM_B1 L1RSYNC */
-	/* PD9  */ {   1,   1,   0,   1,   0,   0   }, /* SMC1 TXD */
-	/* PD8  */ {   1,   1,   0,   0,   0,   0   }, /* SMC1 RXD */
-	/* PD7  */ {   0,   0,   0,   1,   0,   1   },
-	/* PD6  */ {   0,   0,   0,   1,   0,   1   },
-	/* PD5  */ {   0,   0,   0,   1,   0,   0   }, /* PROG_F */
-	/* PD4  */ {   0,   0,   0,   1,   0,   0   }, /* PROG_D */
-	/* PD3  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD2  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD1  */ {   0,   0,   0,   0,   0,   0   }, /* pin doesn't exist */
-	/* PD0  */ {   0,   0,   0,   0,   0,   0   }  /* pin doesn't exist */
-    }
-};
-
-/* ------------------------------------------------------------------------- */
-
-/* Check Board Identity:
- */
-int checkboard (void)
-{
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof (str));
-
-	puts ("Board: ");
-
-	if (!i || strncmp (str, "TQM8260", 7)) {
-		puts ("### No HW ID - assuming TQM8260\n");
-		return (0);
-	}
-
-	puts (str);
-	putc ('\n');
-
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-/* Try SDRAM initialization with P/LSDMR=sdmr and ORx=orx
- *
- * This routine performs standard 8260 initialization sequence
- * and calculates the available memory size. It may be called
- * several times to try different SDRAM configurations on both
- * 60x and local buses.
- */
-static long int try_init (volatile memctl8260_t * memctl, ulong sdmr,
-						  ulong orx, volatile uchar * base)
-{
-	volatile uchar c = 0xff;
-	volatile uint *sdmr_ptr;
-	volatile uint *orx_ptr;
-	ulong maxsize, size;
-	int i;
-
-	/* We must be able to test a location outsize the maximum legal size
-	 * to find out THAT we are outside; but this address still has to be
-	 * mapped by the controller. That means, that the initial mapping has
-	 * to be (at least) twice as large as the maximum expected size.
-	 */
-	maxsize = (1 + (~orx | 0x7fff)) / 2;
-
-	/* Since CONFIG_SYS_SDRAM_BASE is always 0 (??), we assume that
-	 * we are configuring CS1 if base != 0
-	 */
-	sdmr_ptr = base ? &memctl->memc_lsdmr : &memctl->memc_psdmr;
-	orx_ptr = base ? &memctl->memc_or2 : &memctl->memc_or1;
-
-	*orx_ptr = orx;
-
-	/*
-	 * Quote from 8260 UM (10.4.2 SDRAM Power-On Initialization, 10-35):
-	 *
-	 * "At system reset, initialization software must set up the
-	 *  programmable parameters in the memory controller banks registers
-	 *  (ORx, BRx, P/LSDMR). After all memory parameters are configured,
-	 *  system software should execute the following initialization sequence
-	 *  for each SDRAM device.
-	 *
-	 *  1. Issue a PRECHARGE-ALL-BANKS command
-	 *  2. Issue eight CBR REFRESH commands
-	 *  3. Issue a MODE-SET command to initialize the mode register
-	 *
-	 *  The initial commands are executed by setting P/LSDMR[OP] and
-	 *  accessing the SDRAM with a single-byte transaction."
-	 *
-	 * The appropriate BRx/ORx registers have already been set when we
-	 * get here. The SDRAM can be accessed at the address CONFIG_SYS_SDRAM_BASE.
-	 */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_PREA;
-	*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_CBRR;
-	for (i = 0; i < 8; i++)
-		*base = c;
-
-	*sdmr_ptr = sdmr | PSDMR_OP_MRW;
-	*(base + CONFIG_SYS_MRS_OFFS) = c;	/* setting MR on address lines */
-
-	*sdmr_ptr = sdmr | PSDMR_OP_NORM | PSDMR_RFEN;
-	*base = c;
-
-	size = get_ram_size((long *)base, maxsize);
-
-	*orx_ptr = orx | ~(size - 1);
-
-	return (size);
-}
-
-/*
- * Test Power-On-Reset.
- */
-int power_on_reset (void)
-{
-	/* Test Reset Status Register */
-	return gd->reset_status & RSR_CSRS ? 0 : 1;
-}
-
-phys_size_t initdram (int board_type)
-{
-	volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immap->im_memctl;
-
-#ifndef CONFIG_SYS_RAMBOOT
-	long size8, size9;
-#endif
-	long psize, lsize;
-
-	psize = 16 * 1024 * 1024;
-	lsize = 0;
-
-	memctl->memc_psrt = CONFIG_SYS_PSRT;
-	memctl->memc_mptpr = CONFIG_SYS_MPTPR;
-
-#if 0							/* Just for debugging */
-#define	prt_br_or(brX,orX) do {				\
-    ulong start =  memctl->memc_ ## brX & 0xFFFF8000;	\
-    ulong sizem = ~memctl->memc_ ## orX | 0x00007FFF;	\
-    printf ("\n"					\
-	    #brX " 0x%08x  " #orX " 0x%08x "		\
-	    "==> 0x%08lx ... 0x%08lx = %ld MB\n",	\
-	memctl->memc_ ## brX, memctl->memc_ ## orX,	\
-	start, start+sizem, (sizem+1)>>20);		\
-    } while (0)
-	prt_br_or (br0, or0);
-	prt_br_or (br1, or1);
-	prt_br_or (br2, or2);
-	prt_br_or (br3, or3);
-#endif
-
-#ifndef CONFIG_SYS_RAMBOOT
-	/* 60x SDRAM setup:
-	 */
-	size8 = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
-					  (uchar *) CONFIG_SYS_SDRAM_BASE);
-	size9 = try_init (memctl, CONFIG_SYS_PSDMR_9COL, CONFIG_SYS_OR1_9COL,
-					  (uchar *) CONFIG_SYS_SDRAM_BASE);
-
-	if (size8 < size9) {
-		psize = size9;
-		printf ("(60x:9COL - %ld MB, ", psize >> 20);
-	} else {
-		psize = try_init (memctl, CONFIG_SYS_PSDMR_8COL, CONFIG_SYS_OR1_8COL,
-						  (uchar *) CONFIG_SYS_SDRAM_BASE);
-		printf ("(60x:8COL - %ld MB, ", psize >> 20);
-	}
-
-	/* Local SDRAM setup:
-	 */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
-	memctl->memc_lsrt = CONFIG_SYS_LSRT;
-	size8 = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
-					  (uchar *) SDRAM_BASE2_PRELIM);
-	size9 = try_init (memctl, CONFIG_SYS_LSDMR_9COL, CONFIG_SYS_OR2_9COL,
-					  (uchar *) SDRAM_BASE2_PRELIM);
-
-	if (size8 < size9) {
-		lsize = size9;
-		printf ("Local:9COL - %ld MB) using ", lsize >> 20);
-	} else {
-		lsize = try_init (memctl, CONFIG_SYS_LSDMR_8COL, CONFIG_SYS_OR2_8COL,
-						  (uchar *) SDRAM_BASE2_PRELIM);
-		printf ("Local:8COL - %ld MB) using ", lsize >> 20);
-	}
-
-#if 0
-	/* Set up BR2 so that the local SDRAM goes
-	 * right after the 60x SDRAM
-	 */
-	memctl->memc_br2 = (CONFIG_SYS_BR2_PRELIM & ~BRx_BA_MSK) |
-			(CONFIG_SYS_SDRAM_BASE + psize);
-#endif
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	icache_enable ();
-
-	config_scoh_cs ();
-
-	return (psize);
-}
-
-/* ------------------------------------------------------------------------- */
-
-static void config_scoh_cs (void)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile memctl8260_t *memctl = &immr->im_memctl;
-	volatile can_reg_t *can = (volatile can_reg_t *) CONFIG_SYS_CAN0_BASE;
-	__maybe_unused volatile uint tmp, i;
-
-	/* Initialize OR3 / BR3 for CAN Bus Controller 0 */
-	memctl->memc_or3 = CONFIG_SYS_CAN0_OR3;
-	memctl->memc_br3 = CONFIG_SYS_CAN0_BR3;
-	/* Initialize OR4 / BR4 for CAN Bus Controller 1 */
-	memctl->memc_or4 = CONFIG_SYS_CAN1_OR4;
-	memctl->memc_br4 = CONFIG_SYS_CAN1_BR4;
-
-	/* Initialize MAMR to write in the array at address 0x0 */
-	memctl->memc_mamr = 0x00 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
-
-	/* Initialize UPMA for CAN: single read */
-	memctl->memc_mdr = 0xcffeec00;
-	udelay (1);					/* Necessary to have the data correct in the UPM array!!!! */
-	/* The read on the CAN controller write the data of mdr in UPMA array. */
-	/* The index to the array will be incremented automatically
-	   through this read */
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcfc00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x0ffcfc00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0xfffdec07;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-
-	/* Initialize MAMR to write in the array at address 0x18 */
-	memctl->memc_mamr = 0x18 | MxMR_OP_WARR | MxMR_GPL_x4DIS;
-
-	/* Initialize UPMA for CAN: single write */
-	memctl->memc_mdr = 0xfcffec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00ffec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00ffec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00ffec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00ffec00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00fffc00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x00fffc00;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	memctl->memc_mdr = 0x30ffec07;
-	udelay (1);
-	tmp = can->cpu_interface;
-
-	/* Initialize MAMR */
-	memctl->memc_mamr = MxMR_GPL_x4DIS;	/* GPL_B4 ouput line Disable */
-
-
-	/* Initialize OR5 / BR5 for the extended EEPROM Bank0 */
-	memctl->memc_or5 = CONFIG_SYS_EXTPROM_OR5;
-	memctl->memc_br5 = CONFIG_SYS_EXTPROM_BR5;
-	/* Initialize OR6 / BR6 for the extended EEPROM Bank1 */
-	memctl->memc_or6 = CONFIG_SYS_EXTPROM_OR6;
-	memctl->memc_br6 = CONFIG_SYS_EXTPROM_BR6;
-
-	/* Initialize OR7 / BR7 for the Glue Logic */
-	memctl->memc_or7 = CONFIG_SYS_FIOX_OR7;
-	memctl->memc_br7 = CONFIG_SYS_FIOX_BR7;
-
-	/* Initialize OR8 / BR8 for the DOH Logic */
-	memctl->memc_or8 = CONFIG_SYS_FDOHM_OR8;
-	memctl->memc_br8 = CONFIG_SYS_FDOHM_BR8;
-
-	DEBUGF ("OR0 %08x   BR0 %08x\n", memctl->memc_or0, memctl->memc_br0);
-	DEBUGF ("OR1 %08x   BR1 %08x\n", memctl->memc_or1, memctl->memc_br1);
-	DEBUGF ("OR2 %08x   BR2 %08x\n", memctl->memc_or2, memctl->memc_br2);
-	DEBUGF ("OR3 %08x   BR3 %08x\n", memctl->memc_or3, memctl->memc_br3);
-	DEBUGF ("OR4 %08x   BR4 %08x\n", memctl->memc_or4, memctl->memc_br4);
-	DEBUGF ("OR5 %08x   BR5 %08x\n", memctl->memc_or5, memctl->memc_br5);
-	DEBUGF ("OR6 %08x   BR6 %08x\n", memctl->memc_or6, memctl->memc_br6);
-	DEBUGF ("OR7 %08x   BR7 %08x\n", memctl->memc_or7, memctl->memc_br7);
-	DEBUGF ("OR8 %08x   BR8 %08x\n", memctl->memc_or8, memctl->memc_br8);
-
-	DEBUGF ("UPMA  addr 0x0\n");
-	memctl->memc_mamr = 0x00 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
-	for (i = 0; i < 0x8; i++) {
-		tmp = can->cpu_interface;
-		udelay (1);
-		DEBUGF (" %08x ", memctl->memc_mdr);
-	}
-	DEBUGF ("\nUPMA  addr 0x18\n");
-	memctl->memc_mamr = 0x18 | MxMR_OP_RARR | MxMR_GPL_x4DIS;
-	for (i = 0; i < 0x8; i++) {
-		tmp = can->cpu_interface;
-		udelay (1);
-		DEBUGF (" %08x ", memctl->memc_mdr);
-	}
-	DEBUGF ("\n");
-	memctl->memc_mamr = MxMR_GPL_x4DIS;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int misc_init_r (void)
-{
-	fpga_init ();
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/siemens/SCM/scm.h b/board/siemens/SCM/scm.h
deleted file mode 100644
index cb5e03e..0000000
--- a/board/siemens/SCM/scm.h
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#ifndef __SCM_H
-#define __SCM_H
-
-/*----------------*/
-/* CAN Structures */
-/*----------------*/
-
-/* Message */
-struct can_msg {
-    uchar	ctrl_0;
-    uchar	ctrl_1;
-    uchar	arbit_0;
-    uchar	arbit_1;
-    uchar	arbit_2;
-    uchar	arbit_3;
-    uchar	config;
-    uchar	data[8];
-} __attribute__ ((packed));
-
-typedef struct can_msg can_msg_t;
-
-/* CAN Register */
-typedef struct can_reg {
-    uchar	ctrl;
-    uchar	status;
-    uchar	cpu_interface;
-    uchar	resv0;
-    ushort	high_speed_rd;
-    ushort	gbl_mask_std;
-    uint	gbl_mask_extd;
-    uint	msg15_mask;
-    can_msg_t	msg1;
-    uchar	clkout;
-    can_msg_t	msg2;
-    uchar	bus_config;
-    can_msg_t	msg3;
-    uchar	bit_timing_0;
-    can_msg_t	msg4;
-    uchar	bit_timing_1;
-    can_msg_t	msg5;
-    uchar	interrupt;
-    can_msg_t	msg6;
-    uchar	resv1;
-    can_msg_t	msg7;
-    uchar	resv2;
-    can_msg_t	msg8;
-    uchar	resv3;
-    can_msg_t	msg9;
-    uchar	p1conf;
-    can_msg_t	msg10;
-    uchar	p2conf;
-    can_msg_t	msg11;
-    uchar	p1in;
-    can_msg_t	msg12;
-    uchar	p2in;
-    can_msg_t	msg13;
-    uchar	p1out;
-    can_msg_t	msg14;
-    uchar	p2out;
-    can_msg_t	msg15;
-    uchar	ser_res_addr;
-    uchar	resv_cs[0x8000-0x100];	/* 0x8000 is the min size for CS */
-} can_reg_t;
-
-
-#endif /* __SCM_H */
diff --git a/board/siemens/common/README b/board/siemens/common/README
deleted file mode 100644
index 7f1c8cd..0000000
--- a/board/siemens/common/README
+++ /dev/null
@@ -1,27 +0,0 @@
-CCM/SCM-Ergaenzungen fuer U-Boot und Linux:
--------------------------------------------
-
-Es gibt nun ein gemeinsames Kommando zum Laden der FPGAs:
-
-  => help fpga
-  fpga fpga status [name] - print FPGA status
-  fpga reset  [name] - reset FPGA
-  fpga load [name] addr - load FPGA configuration data
-
-Der Name kann beim CCM-Module auch weggelassen werden.
-Die Laengenangabe und damit "puma_len" ist nicht mehr
-noetig:
-
-  => fpga load puma 40600000
-  FPGA load PUMA: addr 40600000: (00000005)... done
-
-Die MTD-Partitionierung kann nun mittels "bootargs" ueber-
-geben werden:
-
-  => printenv addmtd
-  addmtd=setenv bootargs ${bootargs}
-    mtdparts=0:256k(U-Boot)ro,768k(Kernel),-(Rest)\;1:-(myJFFS2)
-
-Die Portierung auf SMC ist natuerlich noch nicht getestet.
-
-Wolfgang Grandegger (04.06.2002)
diff --git a/board/siemens/common/fpga.c b/board/siemens/common/fpga.c
deleted file mode 100644
index ef8bfde..0000000
--- a/board/siemens/common/fpga.c
+++ /dev/null
@@ -1,369 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-#include <command.h>
-#include <linux/ctype.h>
-#include <common.h>
-
-#include "fpga.h"
-
-int  power_on_reset(void);
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-
-static int fpga_get_version(fpga_t* fpga, char* name)
-{
-    char vname[12];
-    /*
-     * Net-list string format:
-     *     "vvvvvvvvddddddddn...".
-     *     Version Date    Name
-     *     "0000000322042002PUMA" = PUMA version 3 from 22.04.2002.
-     */
-    if (strlen(name) < (16 + strlen(fpga->name)))
-	goto failure;
-    /* Check FPGA name */
-    if (strcmp(&name[16], fpga->name) != 0)
-	goto failure;
-    /* Get version number */
-    memcpy(vname, name, 8);
-    vname[8] = '\0';
-    return simple_strtoul(vname, NULL, 16);
-
- failure:
-    printf("Image name %s is invalid\n", name);
-    return -1;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-static fpga_t* fpga_get(char* fpga_name)
-{
-    char name[FPGA_NAME_LEN];
-    int i;
-
-    if (strlen(fpga_name) >= FPGA_NAME_LEN)
-	goto failure;
-    for (i = 0; i < strlen(fpga_name); i++)
-	name[i] = toupper(fpga_name[i]);
-    name[i] = '\0';
-    for (i = 0; i < fpga_count; i++) {
-	if (strcmp(name, fpga_list[i].name) == 0)
-	    return &fpga_list[i];
-    }
- failure:
-    printf("FPGA: name %s is invalid\n", fpga_name);
-    return NULL;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-static void fpga_status (fpga_t* fpga)
-{
-    /* Check state */
-    if (fpga_control(fpga, FPGA_DONE_IS_HIGH))
-	printf ("%s is loaded (%08lx)\n",
-		fpga->name, fpga_control(fpga, FPGA_GET_ID));
-    else
-	printf ("%s is NOT loaded\n", fpga->name);
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-#define FPGA_RESET_TIMEOUT 100 /* = 10 ms */
-
-static int fpga_reset (fpga_t* fpga)
-{
-    int i;
-
-    /* Set PROG to low and wait til INIT goes low */
-    fpga_control(fpga, FPGA_PROG_SET_LOW);
-    for (i = 0; i < FPGA_RESET_TIMEOUT; i++) {
-	udelay (100);
-	if (!fpga_control(fpga, FPGA_INIT_IS_HIGH))
-	    break;
-    }
-    if (i == FPGA_RESET_TIMEOUT)
-	goto failure;
-
-    /* Set PROG to high and wait til INIT goes high */
-    fpga_control(fpga, FPGA_PROG_SET_HIGH);
-    for (i = 0; i < FPGA_RESET_TIMEOUT; i++) {
-	udelay (100);
-	if (fpga_control(fpga, FPGA_INIT_IS_HIGH))
-	    break;
-    }
-    if (i == FPGA_RESET_TIMEOUT)
-	goto failure;
-
-    return 0;
- failure:
-    return 1;
-}
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-#define FPGA_LOAD_TIMEOUT 100 /* = 10 ms */
-
-static int fpga_load (fpga_t* fpga, ulong addr, int checkall)
-{
-    volatile uchar *fpga_addr = (volatile uchar *)fpga->conf_base;
-    image_header_t *hdr = (image_header_t *)addr;
-    ulong len;
-    uchar *data;
-    char msg[32];
-    int verify, i;
-
-#if defined(CONFIG_FIT)
-    if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
-	puts ("Non legacy image format not supported\n");
-	return -1;
-    }
-#endif
-
-    /*
-     * Check the image header and data of the net-list
-     */
-    if (!image_check_magic (hdr)) {
-	strcpy (msg, "Bad Image Magic Number");
-	goto failure;
-    }
-
-    if (!image_check_hcrc (hdr)) {
-	strcpy (msg, "Bad Image Header CRC");
-	goto failure;
-    }
-
-    data = (uchar*)image_get_data (hdr);
-    len  = image_get_data_size (hdr);
-
-    verify = getenv_yesno ("verify");
-    if (verify) {
-	if (!image_check_dcrc (hdr)) {
-	    strcpy (msg, "Bad Image Data CRC");
-	    goto failure;
-	}
-    }
-
-    if (checkall && fpga_get_version(fpga, image_get_name (hdr)) < 0)
-	return 1;
-
-    /* align length */
-    if (len & 1)
-	++len;
-
-    /*
-     * Reset FPGA and wait for completion
-     */
-    if (fpga_reset(fpga)) {
-	strcpy (msg, "Reset Timeout");
-	goto failure;
-    }
-
-    printf ("(%s)... ", image_get_name (hdr));
-    /*
-     * Copy data to FPGA
-     */
-    fpga_control (fpga, FPGA_LOAD_MODE);
-    while (len--) {
-	*fpga_addr = *data++;
-    }
-    fpga_control (fpga, FPGA_READ_MODE);
-
-    /*
-     * Wait for completion and check error status if timeout
-     */
-    for (i = 0; i < FPGA_LOAD_TIMEOUT; i++) {
-	udelay (100);
-	if (fpga_control (fpga, FPGA_DONE_IS_HIGH))
-	    break;
-    }
-    if (i == FPGA_LOAD_TIMEOUT) {
-	if (fpga_control(fpga, FPGA_INIT_IS_HIGH))
-	    strcpy(msg, "Invalid Size");
-	else
-	    strcpy(msg, "CRC Error");
-	goto failure;
-    }
-
-    printf("done\n");
-    return 0;
-
- failure:
-
-    printf("ERROR: %s\n", msg);
-    return 1;
-}
-
-#if defined(CONFIG_CMD_BSP)
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-int do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
-    ulong addr = 0;
-    int i;
-    fpga_t* fpga;
-
-    if (argc < 2)
-	goto failure;
-
-    if (strncmp(argv[1], "stat", 4) == 0) {		/* status */
-	if (argc == 2) {
-	    for (i = 0; i < fpga_count; i++) {
-		fpga_status (&fpga_list[i]);
-	    }
-	}
-	else if (argc == 3) {
-	    if ((fpga = fpga_get(argv[2])) == 0)
-		goto failure;
-	    fpga_status (fpga);
-	}
-	else
-	    goto failure;
-    }
-    else if (strcmp(argv[1],"load") == 0) {		/* load */
-	if (argc == 3 && fpga_count == 1) {
-	    fpga = &fpga_list[0];
-	}
-	else if (argc == 4) {
-	    if ((fpga = fpga_get(argv[2])) == 0)
-		goto failure;
-	}
-	else
-	    goto failure;
-
-	addr = simple_strtoul(argv[argc-1], NULL, 16);
-
-	printf ("FPGA load %s: addr %08lx: ",
-		fpga->name, addr);
-	fpga_load (fpga, addr, 1);
-
-    }
-    else if (strncmp(argv[1], "rese", 4) == 0) {	/* reset */
-	if (argc == 2 && fpga_count == 1) {
-	    fpga = &fpga_list[0];
-	}
-	else if (argc == 3) {
-	    if ((fpga = fpga_get(argv[2])) == 0)
-		goto failure;
-	}
-	else
-	    goto failure;
-
-	printf ("FPGA reset %s: ", fpga->name);
-	if (fpga_reset(fpga))
-	    printf ("ERROR: Timeout\n");
-	else
-	    printf ("done\n");
-    }
-    else
-	goto failure;
-
-    return 0;
-
- failure:
-    return cmd_usage(cmdtp);
-}
-
-U_BOOT_CMD(
-	fpga,	4,	1,	do_fpga,
-	"access FPGA(s)",
-	"fpga status [name] - print FPGA status\n"
-	"fpga reset  [name] - reset FPGA\n"
-	"fpga load [name] addr - load FPGA configuration data"
-);
-
-#endif
-
-/* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . */
-
-int fpga_init (void)
-{
-    ulong addr;
-    ulong new_id, old_id = 0;
-    image_header_t *hdr;
-    fpga_t* fpga;
-    int do_load, i, j;
-    char name[16], *s;
-
-    /*
-     *  Port setup for FPGA control
-     */
-    for (i = 0; i < fpga_count; i++) {
-	fpga_control(&fpga_list[i], FPGA_INIT_PORTS);
-    }
-
-    /*
-     * Load FPGA(s): a new net-list is loaded if the FPGA is
-     * empty, Power-on-Reset or the old one is not up-to-date
-     */
-    for (i = 0; i < fpga_count; i++) {
-	fpga = &fpga_list[i];
-	printf ("%s:  ", fpga->name);
-
-	for (j = 0; j < strlen(fpga->name); j++)
-	    name[j] = tolower(fpga->name[j]);
-	name[j] = '\0';
-	sprintf(name, "%s_addr", name);
-	addr = 0;
-	if ((s = getenv(name)) != NULL)
-	    addr = simple_strtoul(s, NULL, 16);
-
-	if (!addr) {
-	    printf ("env. variable %s undefined\n", name);
-	    return 1;
-	}
-
-	hdr = (image_header_t *)addr;
-#if defined(CONFIG_FIT)
-	if (genimg_get_format ((void *)hdr) != IMAGE_FORMAT_LEGACY) {
-	   puts ("Non legacy image format not supported\n");
-	   return -1;
-	}
-#endif
-
-	if ((new_id = fpga_get_version(fpga, image_get_name (hdr))) == -1)
-	    return 1;
-
-	do_load = 1;
-
-	if (!power_on_reset() && fpga_control(fpga, FPGA_DONE_IS_HIGH)) {
-	    old_id = fpga_control(fpga, FPGA_GET_ID);
-	    if (new_id == old_id)
-		do_load = 0;
-	}
-
-	if (do_load) {
-	    printf ("loading ");
-	    fpga_load (fpga, addr, 0);
-	} else {
-	    printf ("loaded (%08lx)\n", old_id);
-	}
-    }
-
-    return 0;
-}
diff --git a/board/siemens/common/fpga.h b/board/siemens/common/fpga.h
deleted file mode 100644
index 2de25b0..0000000
--- a/board/siemens/common/fpga.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#ifndef _FPGA_H_
-#define _FPGA_H_
-
-#define FPGA_INIT_IS_HIGH   0
-#define FPGA_INIT_SET_HIGH  1
-#define FPGA_INIT_SET_LOW   2
-#define FPGA_PROG_SET_HIGH  3
-#define FPGA_PROG_SET_LOW   4
-#define FPGA_DONE_IS_HIGH   5
-#define	FPGA_READ_MODE      6
-#define FPGA_LOAD_MODE      7
-#define FPGA_GET_ID         8
-#define FPGA_INIT_PORTS     9
-
-#define FPGA_NAME_LEN       8
-typedef struct {
-    char  name[FPGA_NAME_LEN];
-    ulong conf_base;
-    uint  init_mask;
-    uint  prog_mask;
-    uint  done_mask;
-} fpga_t;
-
-extern fpga_t fpga_list[];
-extern int    fpga_count;
-
-ulong fpga_control (fpga_t* fpga, int cmd);
-
-#endif /* _FPGA_H_ */
diff --git a/board/sixnet/u-boot.lds b/board/sixnet/u-boot.lds
index 02d1980..6cf7a01 100644
--- a/board/sixnet/u-boot.lds
+++ b/board/sixnet/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/snmc/qs850/u-boot.lds b/board/snmc/qs850/u-boot.lds
index 9ab248a..f57f8a0 100644
--- a/board/snmc/qs850/u-boot.lds
+++ b/board/snmc/qs850/u-boot.lds
@@ -69,9 +69,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/snmc/qs860t/u-boot.lds b/board/snmc/qs860t/u-boot.lds
index d0b60cf..18f962c 100644
--- a/board/snmc/qs860t/u-boot.lds
+++ b/board/snmc/qs860t/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/spc1920/u-boot.lds b/board/spc1920/u-boot.lds
index d0b60cf..18f962c 100644
--- a/board/spc1920/u-boot.lds
+++ b/board/spc1920/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/spd8xx/u-boot.lds b/board/spd8xx/u-boot.lds
index a84e7fd..f69e39d 100644
--- a/board/spd8xx/u-boot.lds
+++ b/board/spd8xx/u-boot.lds
@@ -75,9 +75,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/spd8xx/u-boot.lds.debug b/board/spd8xx/u-boot.lds.debug
index a95c47f..4155b60 100644
--- a/board/spd8xx/u-boot.lds.debug
+++ b/board/spd8xx/u-boot.lds.debug
@@ -107,9 +107,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/stx/stxxtc/u-boot.lds b/board/stx/stxxtc/u-boot.lds
index a949e4f..cdc1fda 100644
--- a/board/stx/stxxtc/u-boot.lds
+++ b/board/stx/stxxtc/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/stx/stxxtc/u-boot.lds.debug b/board/stx/stxxtc/u-boot.lds.debug
index a001f3f..900da64 100644
--- a/board/stx/stxxtc/u-boot.lds.debug
+++ b/board/stx/stxxtc/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/svm_sc8xx/u-boot.lds b/board/svm_sc8xx/u-boot.lds
index c65f022..1635875 100644
--- a/board/svm_sc8xx/u-boot.lds
+++ b/board/svm_sc8xx/u-boot.lds
@@ -83,9 +83,11 @@
 
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/sx1/Makefile b/board/sx1/Makefile
deleted file mode 100644
index 292459f..0000000
--- a/board/sx1/Makefile
+++ /dev/null
@@ -1,45 +0,0 @@
-#
-# (C) Copyright 2004-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	:= sx1.o
-SOBJS	:= lowlevel_init.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS) $(SOBJS)
-	$(call cmd_link_o_target, $(OBJS) $(SOBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/sx1/config.mk b/board/sx1/config.mk
deleted file mode 100644
index 441bea2..0000000
--- a/board/sx1/config.mk
+++ /dev/null
@@ -1,19 +0,0 @@
-#
-# (C) Copyright 2004
-# Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
-#
-# SX1 board with OMAP1510 (ARM925T) cpu
-# see http://www.ti.com/ for more information on Texas Insturments
-#
-# SX1 has 1 bank of 256 MB SDRAM
-# Physical Address:
-# 1000'0000 to 2000'0000
-#
-#
-# Linux-Kernel is expected to be at 1000'8000, entry 1000'8000  (mem base + reserved)
-#
-# we load ourself to 1108'0000
-#
-#
-
-CONFIG_SYS_TEXT_BASE = 0x11080000
diff --git a/board/sx1/lowlevel_init.S b/board/sx1/lowlevel_init.S
deleted file mode 100644
index c1a811a..0000000
--- a/board/sx1/lowlevel_init.S
+++ /dev/null
@@ -1,397 +0,0 @@
-/*
- * Board specific setup info
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- *
- * -- Some bits of code used from rrload's head_OMAP1510.s --
- * Copyright (C) 2002 RidgeRun, Inc.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-
-#if defined(CONFIG_OMAP1510)
-#include <./configs/omap1510.h>
-#endif
-
-#define OMAP1510_CLKS ((1<<EN_XORPCK)|(1<<EN_PERCK)|(1<<EN_TIMCK)|(1<<EN_GPIOCK))
-
-
-_TEXT_BASE:
-	.word	CONFIG_SYS_TEXT_BASE	 /* sdram load addr from config.mk */
-
-.globl lowlevel_init
-lowlevel_init:
-
-	/*
-	 * Configure 1510 pins functions to match our board.
-	 */
-	ldr	r0, REG_PULL_DWN_CTRL_0
-	ldr	r1, VAL_PULL_DWN_CTRL_0
-	str	r1, [r0]
-	ldr	r0, REG_PULL_DWN_CTRL_1
-	ldr	r1, VAL_PULL_DWN_CTRL_1
-	str	r1, [r0]
-	ldr	r0, REG_PULL_DWN_CTRL_2
-	ldr	r1, VAL_PULL_DWN_CTRL_2
-	str	r1, [r0]
-	ldr	r0, REG_PULL_DWN_CTRL_3
-	ldr	r1, VAL_PULL_DWN_CTRL_3
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_4
-	ldr	r1, VAL_FUNC_MUX_CTRL_4
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_5
-	ldr	r1, VAL_FUNC_MUX_CTRL_5
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_6
-	ldr	r1, VAL_FUNC_MUX_CTRL_6
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_7
-	ldr	r1, VAL_FUNC_MUX_CTRL_7
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_8
-	ldr	r1, VAL_FUNC_MUX_CTRL_8
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_9
-	ldr	r1, VAL_FUNC_MUX_CTRL_9
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_A
-	ldr	r1, VAL_FUNC_MUX_CTRL_A
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_B
-	ldr	r1, VAL_FUNC_MUX_CTRL_B
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_C
-	ldr	r1, VAL_FUNC_MUX_CTRL_C
-	str	r1, [r0]
-	ldr	r0, REG_FUNC_MUX_CTRL_D
-	ldr	r1, VAL_FUNC_MUX_CTRL_D
-	str	r1, [r0]
-	ldr	r0, REG_VOLTAGE_CTRL_0
-	ldr	r1, VAL_VOLTAGE_CTRL_0
-	str	r1, [r0]
-	ldr	r0, REG_TEST_DBG_CTRL_0
-	ldr	r1, VAL_TEST_DBG_CTRL_0
-	str	r1, [r0]
-	ldr	r0, REG_MOD_CONF_CTRL_0
-	ldr	r1, VAL_MOD_CONF_CTRL_0
-	str	r1, [r0]
-
-	/* Move to 1510 mode */
-	ldr	r0, REG_COMP_MODE_CTRL_0
-	ldr	r1, VAL_COMP_MODE_CTRL_0
-	str	r1, [r0]
-
-	/* Set up Traffic Ctlr*/
-	ldr r0, REG_TC_IMIF_PRIO
-	mov r1, #0x0
-	str r1, [r0]
-	ldr r0, REG_TC_EMIFS_PRIO
-	str r1, [r0]
-	ldr r0, REG_TC_EMIFF_PRIO
-	str r1, [r0]
-
-	ldr r0, REG_TC_EMIFS_CONFIG
-	ldr r1, [r0]
-	bic r1, r1, #0x08   /* clear the global power-down enable PDE bit */
-	bic r1, r1, #0x01   /* write protect flash by clearing the WP bit */
-	str r1, [r0]	    /* EMIFS GlB Configuration. (value 0x12 most likely) */
-
-	ldr r0, _GPIO_PIN_CONTROL_REG
-	mov r1,#0
-	orr r1, r1, #0x0001 /* M_PCM_SYNC */
-	orr r1, r1, #0x4000 /* IPC_ACTIVE */
-	strh r1,[r0]
-
-	ldr r0, _GPIO_DIR_CONTROL_REG
-	mov r1,#0
-	bic r1, r1, #0x0001 /* M_PCM_SYNC */
-	bic r1, r1, #0x4000 /* IPC_ACTIVE */
-	strh r1,[r0]
-
-	ldr r0, _GPIO_DATA_OUTPUT_REG
-	mov r1,#0
-	bic r1, r1, #0x0001 /* M_PCM_SYNC */
-	orr r1, r1, #0x4000 /* IPC_ACTIVE */
-	strh r1,[r0]
-
-	/* Setup some clock domains */
-	ldr r1, =OMAP1510_CLKS
-	ldr r0, REG_ARM_IDLECT2
-	strh r1, [r0]  /* CLKM, Clock domain control. */
-
-	mov r1, #0x01  /* PER_EN bit */
-	ldr r0, REG_ARM_RSTCT2
-	strh r1, [r0]  /* CLKM; Peripheral reset. */
-
-	/* Set CLKM to Sync-Scalable  */
-	/* I supposidly need to enable the dsp clock before switching */
-	mov r1, #0x1000
-	ldr r0, REG_ARM_SYSST
-	strh r1, [r0]
-	mov r0, #0x400
-1:
-	subs r0, r0, #0x1   /* wait for any bubbles to finish */
-	bne 1b
-
-	ldr r1, VAL_ARM_CKCTL  /* use 12Mhz ref, PER must be <= 50Mhz so /2 */
-	ldr r0, REG_ARM_CKCTL
-	strh r1, [r0]
-
-	/* setup DPLL 1 */
-	ldr r1, VAL_DPLL1_CTL
-	ldr r0, REG_DPLL1_CTL
-	strh r1, [r0]
-	ands r1, r1, #0x10  /* Check if PLL is enabled. */
-	beq lock_end	    /* Do not look for lock if BYPASS selected */
-2:
-	ldrh r1, [r0]
-	ands r1, r1, #0x01  /* Check the LOCK bit. */
-	beq 2b		    /* ...loop until bit goes hi. */
-lock_end:
-
-	/* Set memory timings corresponding to the new clock speed */
-
-	/* Check execution location to determine current execution location
-	 * and branch to appropriate initialization code.
-	 */
-	mov r0, #0x10000000		    /* Load physical SDRAM base. */
-	mov r1, pc			    /* Get current execution location. */
-	cmp r1, r0			    /* Compare. */
-	bge skip_sdram			    /* Skip over EMIF-fast initialization if running from SDRAM. */
-
-	/*
-	 * Delay for SDRAM initialization.
-	 */
-	mov r3, #0x1800			       /* value should be checked */
-3:
-	subs r3, r3, #0x1		      /* Decrement count */
-	bne 3b
-
-	/*
-	 * Set SDRAM control values. Disable refresh before MRS command.
-	 */
-	ldr r0, VAL_TC_EMIFF_SDRAM_CONFIG   /* get good value */
-	bic r3, r0, #0xC		    /* (BIT3|BIT2) ulConfig with auto-refresh disabled. */
-	orr r3, r3, #0x8000000		    /* (BIT27) Disable CLK when Power down or Self-Refresh */
-	orr r3, r3, #0x4000000		    /* BIT26 Power Down Enable */
-	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
-	str r3, [r2]			    /* Store the passed value with AR disabled. */
-
-	ldr r1, VAL_TC_EMIFF_MRS	    /* get MRS value */
-	ldr r2, REG_TC_EMIFF_MRS	    /* Point to MRS register. */
-	str r1, [r2]			    /* Store the passed value.*/
-
-	ldr r2, REG_TC_EMIFF_SDRAM_CONFIG   /* Point to configuration register. */
-	str r0, [r2]			    /* Store the passed value. */
-
-	/*
-	 * Delay for SDRAM initialization.
-	 */
-	mov r3, #0x1800
-4:
-	subs r3, r3, #1			    /* Decrement count. */
-	bne 4b
-
-skip_sdram:
-
-	/* slow interface */
-	ldr r1, VAL_TC_EMIFS_CS0_CONFIG
-	ldr r0, REG_TC_EMIFS_CS0_CONFIG
-	str r1, [r0] /* Chip Select 0 */
-	ldr r1, VAL_TC_EMIFS_CS1_CONFIG
-	ldr r0, REG_TC_EMIFS_CS1_CONFIG
-	str r1, [r0] /* Chip Select 1 */
-	ldr r1, VAL_TC_EMIFS_CS2_CONFIG
-	ldr r0, REG_TC_EMIFS_CS2_CONFIG
-	str r1, [r0] /* Chip Select 2 */
-	ldr r1, VAL_TC_EMIFS_CS3_CONFIG
-	ldr r0, REG_TC_EMIFS_CS3_CONFIG
-	str r1, [r0] /* Chip Select 3 */
-
-	/* back to arch calling code */
-	mov	pc, lr
-
-/* the literal pools origin */
-	.ltorg
-
-/* OMAP configuration registers */
-REG_FUNC_MUX_CTRL_0:		/* 32 bits */
-	.word 0xfffe1000
-REG_FUNC_MUX_CTRL_1:		/* 32 bits */
-	.word 0xfffe1004
-REG_FUNC_MUX_CTRL_2:		/* 32 bits */
-	.word 0xfffe1008
-REG_COMP_MODE_CTRL_0:		/* 32 bits */
-	.word 0xfffe100c
-REG_FUNC_MUX_CTRL_3:		/* 32 bits */
-	.word 0xfffe1010
-REG_FUNC_MUX_CTRL_4:		/* 32 bits */
-	.word 0xfffe1014
-REG_FUNC_MUX_CTRL_5:		/* 32 bits */
-	.word 0xfffe1018
-REG_FUNC_MUX_CTRL_6:		/* 32 bits */
-	.word 0xfffe101c
-REG_FUNC_MUX_CTRL_7:		/* 32 bits */
-	.word 0xfffe1020
-REG_FUNC_MUX_CTRL_8:		/* 32 bits */
-	.word 0xfffe1024
-REG_FUNC_MUX_CTRL_9:		/* 32 bits */
-	.word 0xfffe1028
-REG_FUNC_MUX_CTRL_A:		/* 32 bits */
-	.word 0xfffe102C
-REG_FUNC_MUX_CTRL_B:		/* 32 bits */
-	.word 0xfffe1030
-REG_FUNC_MUX_CTRL_C:		/* 32 bits */
-	.word 0xfffe1034
-REG_FUNC_MUX_CTRL_D:		/* 32 bits */
-	.word 0xfffe1038
-REG_PULL_DWN_CTRL_0:		/* 32 bits */
-	.word 0xfffe1040
-REG_PULL_DWN_CTRL_1:		/* 32 bits */
-	.word 0xfffe1044
-REG_PULL_DWN_CTRL_2:		/* 32 bits */
-	.word 0xfffe1048
-REG_PULL_DWN_CTRL_3:		/* 32 bits */
-	.word 0xfffe104c
-REG_VOLTAGE_CTRL_0:		/* 32 bits */
-	.word 0xfffe1060
-REG_TEST_DBG_CTRL_0:		/* 32 bits */
-	.word 0xfffe1070
-REG_MOD_CONF_CTRL_0:		/* 32 bits */
-	.word 0xfffe1080
-REG_TC_IMIF_PRIO:		/* 32 bits */
-	.word 0xfffecc00
-REG_TC_EMIFS_PRIO:		/* 32 bits */
-	.word 0xfffecc04
-REG_TC_EMIFF_PRIO:		/* 32 bits */
-	.word 0xfffecc08
-REG_TC_EMIFS_CONFIG:		/* 32 bits */
-	.word 0xfffecc0c
-REG_TC_EMIFS_CS0_CONFIG:	/* 32 bits */
-	.word 0xfffecc10
-REG_TC_EMIFS_CS1_CONFIG:	/* 32 bits */
-	.word 0xfffecc14
-REG_TC_EMIFS_CS2_CONFIG:	/* 32 bits */
-	.word 0xfffecc18
-REG_TC_EMIFS_CS3_CONFIG:	/* 32 bits */
-	.word 0xfffecc1c
-REG_TC_EMIFF_SDRAM_CONFIG:	/* 32 bits */
-	.word 0xfffecc20
-REG_TC_EMIFF_MRS:		/* 32 bits */
-	.word 0xfffecc24
-/* MPU clock/reset/power mode control registers */
-REG_ARM_CKCTL:			/* 16 bits */
-	.word 0xfffece00
-REG_ARM_IDLECT2:		/* 16 bits */
-	.word 0xfffece08
-REG_ARM_RSTCT2:			/* 16 bits */
-	.word 0xfffece14
-REG_ARM_SYSST:			/* 16 bits */
-	.word 0xfffece18
-/* DPLL control registers */
-REG_DPLL1_CTL:			/* 16 bits */
-	.word 0xfffecf00
-/* identification code register */
-REG_IDCODE:			/* 32 bits */
-	.word 0xfffed404
-
-/* SX1 specific */
-_GPIO_PIN_CONTROL_REG:
-	.word GPIO_PIN_CONTROL_REG
-_GPIO_DIR_CONTROL_REG:
-	.word GPIO_DIR_CONTROL_REG
-_GPIO_DATA_OUTPUT_REG:
-	.word GPIO_DATA_OUTPUT_REG
-
-VAL_COMP_MODE_CTRL_0:
-	.word 0x0000eaef
-VAL_FUNC_MUX_CTRL_4:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_5:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_6:
-	.word 0x00000001
-VAL_FUNC_MUX_CTRL_7:
-	.word 0x00001000
-VAL_FUNC_MUX_CTRL_8:
-	.word 0x00001240       /*[Knoller]  Value of Symbian Image Wing B2*/
-VAL_FUNC_MUX_CTRL_9:
-	.word 0x00201008
-VAL_FUNC_MUX_CTRL_A:
-	.word 0x00001000
-VAL_FUNC_MUX_CTRL_B:
-	.word 0x00000000
-VAL_FUNC_MUX_CTRL_C:
-	.word 0x09008001       /*[Knoller]  Value of Symbian Image Wing B2*/
-VAL_FUNC_MUX_CTRL_D:
-	.word 0x00000000
-VAL_PULL_DWN_CTRL_0:
-	.word 0xfffeffff
-VAL_PULL_DWN_CTRL_1:
-	.word 0xd1ffffec
-VAL_PULL_DWN_CTRL_2:
-	.word 0xffa80c5b
-VAL_PULL_DWN_CTRL_3:
-	.word 0xffffc0fe
-VAL_VOLTAGE_CTRL_0:
-	.word 0x00000007
-VAL_TEST_DBG_CTRL_0:
-	/* The OMAP5910 TRM says this register must be 0, but HelenConfRegs
-	 * says to write a 7.  Don't know what the right thing is to do, so
-	 * I'm leaving it at 7 since that's what was already here.
-	 */
-	.word 0x00000007
-VAL_MOD_CONF_CTRL_0:
-	.word 0x0da20000       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-VAL_ARM_CKCTL:
-	.word 0x010D
-
-VAL_DPLL1_CTL:
-	.word 0x3A33   /*[Hertle] Value of Symbian Image*/
-
-VAL_TC_EMIFS_CS1_CONFIG_PRELIM:
-	.word 0x00001149
-
-VAL_TC_EMIFS_CS2_CONFIG_PRELIM:
-	.word 0x00004158
-
-VAL_TC_EMIFS_CS0_CONFIG:
-	.word 0x00213090       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS1_CONFIG:
-	.word 0x00215070       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS2_CONFIG:
-	.word 0x00001139       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFS_CS3_CONFIG:
-	.word 0x00001139       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-VAL_TC_EMIFF_SDRAM_CONFIG:
-	.word 0x0105f0b4       /*[Knoller]  Value of Symbian Image Wing B2*/
-
-
-VAL_TC_EMIFF_MRS:
-	.word 0x00000027       /*[Knoller]  Value of Symbian Image Wing B2*/
diff --git a/board/sx1/sx1.c b/board/sx1/sx1.c
deleted file mode 100644
index aaef76e..0000000
--- a/board/sx1/sx1.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2003
- * Texas Instruments, <www.ti.com>
- * Kshitij Gupta <Kshitij@ti.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void flash__init (void);
-static void ether__init (void);
-
-static inline void delay (unsigned long loops)
-{
-	__asm__ volatile ("1:\n"
-			  "subs %0, %1, #1\n"
-			  "bne 1b":"=r" (loops):"0" (loops));
-}
-
-/*
- * Miscellaneous platform dependent initialisations
- */
-
-int board_init (void)
-{
-	/* arch number of SX1 Board */
-	gd->bd->bi_arch_number = MACH_TYPE_SX1;
-
-	/* adress of boot parameters */
-	gd->bd->bi_boot_params = 0x10000100;
-
-/* kk - this speeds up your boot a quite a bit.	 However to make it
- *  work, you need make sure your kernel startup flush bug is fixed.
- *  ... rkw ...
- */
-	icache_enable ();
-
-	flash__init ();
-	ether__init ();
-	return 0;
-}
-
-
-int misc_init_r (void)
-{
-	/* volatile ushort *gdir = (ushort *) (GPIO_DIR_CONTROL_REG); */
-	/* volatile ushort *mdir = (ushort *) (MPUIO_DIR_CONTROL_REG); */
-
-	/* setup gpio direction to match board (no floats!) */
-	/**gdir = 0xCFF9; */
-	/**mdir = 0x103F; */
-
-	return (0);
-}
-
-/******************************
- Routine:
- Description:
-******************************/
-static void flash__init (void)
-{
-#define CS0_CHIP_SELECT_REG 0xfffecc10
-#define CS3_CHIP_SELECT_REG 0xfffecc1c
-#define EMIFS_GlB_Config_REG 0xfffecc0c
-
-	unsigned int regval;
-
-	regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
-	regval = regval | 0x0001;	/* Turn off write protection for flash devices. */
-	if (regval & 0x0002) {
-		regval = regval & 0xfffd;	/* Swap CS0 and CS3 so that flash is visible at 0x0 and eeprom at 0x0c000000. */
-		/* If, instead, you want to reference flash at 0x0c000000, then it seemed the following were necessary. */
-		/* *((volatile unsigned int *)CS0_CHIP_SELECT_REG) = 0x202090; / * Overrides head.S setting of 0x212090 */
-		/* *((volatile unsigned int *)CS3_CHIP_SELECT_REG) = 0x202090; / * Let's flash chips be fully functional. */
-	}
-	*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
-}
-
-
-/******************************
- Routine:
- Description:
-******************************/
-static void ether__init (void)
-{
-#define ETH_CONTROL_REG 0x0800000b
-	/* take the Ethernet controller out of reset and wait
-	 * for the EEPROM load to complete.
-	 */
-	*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
-	udelay (3);
-}
-
-
-int dram_init (void)
-{
-	gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
-	gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
-
-	return 0;
-}
diff --git a/board/teejet/mt_ventoux/mt_ventoux.c b/board/teejet/mt_ventoux/mt_ventoux.c
index ecb9b6c..9622a81 100644
--- a/board/teejet/mt_ventoux/mt_ventoux.c
+++ b/board/teejet/mt_ventoux/mt_ventoux.c
@@ -45,6 +45,8 @@
 
 #define BUZZER		140
 #define SPEAKER		141
+#define USB1_PWR	127
+#define USB2_PWR	149
 
 #ifndef CONFIG_FPGA
 #error "The Teejet mt_ventoux must have CONFIG_FPGA enabled"
@@ -247,6 +249,12 @@
 	gpio_direction_output(BUZZER, 0);
 	gpio_direction_output(SPEAKER, 0);
 
+	/* Activate USB power */
+	gpio_request(USB1_PWR, "USB1_PWR");
+	gpio_request(USB2_PWR, "USB2_PWR");
+	gpio_direction_output(USB1_PWR, 1);
+	gpio_direction_output(USB2_PWR, 1);
+
 	return 0;
 }
 
diff --git a/board/ti/am335x/Makefile b/board/ti/am335x/Makefile
index ca50eef..67a87a1 100644
--- a/board/ti/am335x/Makefile
+++ b/board/ti/am335x/Makefile
@@ -22,6 +22,7 @@
 COBJS	:= mux.o
 endif
 
+COBJS	+= board.o
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
 SOBJS	:= $(addprefix $(obj),$(SOBJS))
diff --git a/board/ti/am335x/board.c b/board/ti/am335x/board.c
new file mode 100644
index 0000000..b56a801
--- /dev/null
+++ b/board/ti/am335x/board.c
@@ -0,0 +1,418 @@
+/*
+ * board.c
+ *
+ * Board functions for TI AM335X based boards
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <common.h>
+#include <errno.h>
+#include <spl.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/hardware.h>
+#include <asm/arch/omap.h>
+#include <asm/arch/ddr_defs.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/gpio.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/io.h>
+#include <asm/emif.h>
+#include <asm/gpio.h>
+#include <i2c.h>
+#include <miiphy.h>
+#include <cpsw.h>
+#include "board.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static struct wd_timer *wdtimer = (struct wd_timer *)WDT_BASE;
+#ifdef CONFIG_SPL_BUILD
+static struct uart_sys *uart_base = (struct uart_sys *)DEFAULT_UART_BASE;
+#endif
+
+/* MII mode defines */
+#define MII_MODE_ENABLE		0x0
+#define RGMII_MODE_ENABLE	0xA
+
+/* GPIO that controls power to DDR on EVM-SK */
+#define GPIO_DDR_VTT_EN		7
+
+static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
+
+static struct am335x_baseboard_id __attribute__((section (".data"))) header;
+
+static inline int board_is_bone(void)
+{
+	return !strncmp(header.name, "A335BONE", HDR_NAME_LEN);
+}
+
+static inline int board_is_bone_lt(void)
+{
+	return !strncmp(header.name, "A335BNLT", HDR_NAME_LEN);
+}
+
+static inline int board_is_evm_sk(void)
+{
+	return !strncmp("A335X_SK", header.name, HDR_NAME_LEN);
+}
+
+static inline int board_is_idk(void)
+{
+	return !strncmp(header.config, "SKU#02", 6);
+}
+
+/*
+ * Read header information from EEPROM into global structure.
+ */
+static int read_eeprom(void)
+{
+	/* Check if baseboard eeprom is available */
+	if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) {
+		puts("Could not probe the EEPROM; something fundamentally "
+			"wrong on the I2C bus.\n");
+		return -ENODEV;
+	}
+
+	/* read the eeprom using i2c */
+	if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 2, (uchar *)&header,
+							sizeof(header))) {
+		puts("Could not read the EEPROM; something fundamentally"
+			" wrong on the I2C bus.\n");
+		return -EIO;
+	}
+
+	if (header.magic != 0xEE3355AA) {
+		/*
+		 * read the eeprom using i2c again,
+		 * but use only a 1 byte address
+		 */
+		if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0, 1,
+					(uchar *)&header, sizeof(header))) {
+			puts("Could not read the EEPROM; something "
+				"fundamentally wrong on the I2C bus.\n");
+			return -EIO;
+		}
+
+		if (header.magic != 0xEE3355AA) {
+			printf("Incorrect magic number (0x%x) in EEPROM\n",
+					header.magic);
+			return -EINVAL;
+		}
+	}
+
+	return 0;
+}
+
+/* UART Defines */
+#ifdef CONFIG_SPL_BUILD
+#define UART_RESET		(0x1 << 1)
+#define UART_CLK_RUNNING_MASK	0x1
+#define UART_SMART_IDLE_EN	(0x1 << 0x3)
+
+static void rtc32k_enable(void)
+{
+	struct rtc_regs *rtc = (struct rtc_regs *)AM335X_RTC_BASE;
+
+	/*
+	 * Unlock the RTC's registers.  For more details please see the
+	 * RTC_SS section of the TRM.  In order to unlock we need to
+	 * write these specific values (keys) in this order.
+	 */
+	writel(0x83e70b13, &rtc->kick0r);
+	writel(0x95a4f1e0, &rtc->kick1r);
+
+	/* Enable the RTC 32K OSC by setting bits 3 and 6. */
+	writel((1 << 3) | (1 << 6), &rtc->osc);
+}
+
+static const struct ddr_data ddr2_data = {
+	.datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
+			  (MT47H128M16RT25E_RD_DQS<<20) |
+			  (MT47H128M16RT25E_RD_DQS<<10) |
+			  (MT47H128M16RT25E_RD_DQS<<0)),
+	.datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
+			  (MT47H128M16RT25E_WR_DQS<<20) |
+			  (MT47H128M16RT25E_WR_DQS<<10) |
+			  (MT47H128M16RT25E_WR_DQS<<0)),
+	.datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
+			 (MT47H128M16RT25E_PHY_WRLVL<<20) |
+			 (MT47H128M16RT25E_PHY_WRLVL<<10) |
+			 (MT47H128M16RT25E_PHY_WRLVL<<0)),
+	.datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
+			 (MT47H128M16RT25E_PHY_GATELVL<<20) |
+			 (MT47H128M16RT25E_PHY_GATELVL<<10) |
+			 (MT47H128M16RT25E_PHY_GATELVL<<0)),
+	.datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
+			  (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
+			  (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
+			  (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
+	.datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
+			  (MT47H128M16RT25E_PHY_WR_DATA<<20) |
+			  (MT47H128M16RT25E_PHY_WR_DATA<<10) |
+			  (MT47H128M16RT25E_PHY_WR_DATA<<0)),
+	.datauserank0delay = MT47H128M16RT25E_PHY_RANK0_DELAY,
+	.datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
+static const struct cmd_control ddr2_cmd_ctrl_data = {
+	.cmd0csratio = MT47H128M16RT25E_RATIO,
+	.cmd0dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
+	.cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+	.cmd1csratio = MT47H128M16RT25E_RATIO,
+	.cmd1dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
+	.cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+
+	.cmd2csratio = MT47H128M16RT25E_RATIO,
+	.cmd2dldiff = MT47H128M16RT25E_DLL_LOCK_DIFF,
+	.cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
+};
+
+static const struct emif_regs ddr2_emif_reg_data = {
+	.sdram_config = MT47H128M16RT25E_EMIF_SDCFG,
+	.ref_ctrl = MT47H128M16RT25E_EMIF_SDREF,
+	.sdram_tim1 = MT47H128M16RT25E_EMIF_TIM1,
+	.sdram_tim2 = MT47H128M16RT25E_EMIF_TIM2,
+	.sdram_tim3 = MT47H128M16RT25E_EMIF_TIM3,
+	.emif_ddr_phy_ctlr_1 = MT47H128M16RT25E_EMIF_READ_LATENCY,
+};
+
+static const struct ddr_data ddr3_data = {
+	.datardsratio0 = MT41J128MJT125_RD_DQS,
+	.datawdsratio0 = MT41J128MJT125_WR_DQS,
+	.datafwsratio0 = MT41J128MJT125_PHY_FIFO_WE,
+	.datawrsratio0 = MT41J128MJT125_PHY_WR_DATA,
+	.datadldiff0 = PHY_DLL_LOCK_DIFF,
+};
+
+static const struct cmd_control ddr3_cmd_ctrl_data = {
+	.cmd0csratio = MT41J128MJT125_RATIO,
+	.cmd0dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+	.cmd0iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+	.cmd1csratio = MT41J128MJT125_RATIO,
+	.cmd1dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+	.cmd1iclkout = MT41J128MJT125_INVERT_CLKOUT,
+
+	.cmd2csratio = MT41J128MJT125_RATIO,
+	.cmd2dldiff = MT41J128MJT125_DLL_LOCK_DIFF,
+	.cmd2iclkout = MT41J128MJT125_INVERT_CLKOUT,
+};
+
+static struct emif_regs ddr3_emif_reg_data = {
+	.sdram_config = MT41J128MJT125_EMIF_SDCFG,
+	.ref_ctrl = MT41J128MJT125_EMIF_SDREF,
+	.sdram_tim1 = MT41J128MJT125_EMIF_TIM1,
+	.sdram_tim2 = MT41J128MJT125_EMIF_TIM2,
+	.sdram_tim3 = MT41J128MJT125_EMIF_TIM3,
+	.zq_config = MT41J128MJT125_ZQ_CFG,
+	.emif_ddr_phy_ctlr_1 = MT41J128MJT125_EMIF_READ_LATENCY,
+};
+#endif
+
+/*
+ * early system init of muxing and clocks.
+ */
+void s_init(void)
+{
+	/* WDT1 is already running when the bootloader gets control
+	 * Disable it to avoid "random" resets
+	 */
+	writel(0xAAAA, &wdtimer->wdtwspr);
+	while (readl(&wdtimer->wdtwwps) != 0x0)
+		;
+	writel(0x5555, &wdtimer->wdtwspr);
+	while (readl(&wdtimer->wdtwwps) != 0x0)
+		;
+
+#ifdef CONFIG_SPL_BUILD
+	/* Setup the PLLs and the clocks for the peripherals */
+	pll_init();
+
+	/* Enable RTC32K clock */
+	rtc32k_enable();
+
+	/* UART softreset */
+	u32 regVal;
+
+#ifdef CONFIG_SERIAL1
+	enable_uart0_pin_mux();
+#endif /* CONFIG_SERIAL1 */
+#ifdef CONFIG_SERIAL2
+	enable_uart1_pin_mux();
+#endif /* CONFIG_SERIAL2 */
+#ifdef CONFIG_SERIAL3
+	enable_uart2_pin_mux();
+#endif /* CONFIG_SERIAL3 */
+#ifdef CONFIG_SERIAL4
+	enable_uart3_pin_mux();
+#endif /* CONFIG_SERIAL4 */
+#ifdef CONFIG_SERIAL5
+	enable_uart4_pin_mux();
+#endif /* CONFIG_SERIAL5 */
+#ifdef CONFIG_SERIAL6
+	enable_uart5_pin_mux();
+#endif /* CONFIG_SERIAL6 */
+
+	regVal = readl(&uart_base->uartsyscfg);
+	regVal |= UART_RESET;
+	writel(regVal, &uart_base->uartsyscfg);
+	while ((readl(&uart_base->uartsyssts) &
+		UART_CLK_RUNNING_MASK) != UART_CLK_RUNNING_MASK)
+		;
+
+	/* Disable smart idle */
+	regVal = readl(&uart_base->uartsyscfg);
+	regVal |= UART_SMART_IDLE_EN;
+	writel(regVal, &uart_base->uartsyscfg);
+
+	gd = &gdata;
+
+	preloader_console_init();
+
+	/* Initalize the board header */
+	enable_i2c0_pin_mux();
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	if (read_eeprom() < 0)
+		puts("Could not get board ID.\n");
+
+	enable_board_pin_mux(&header);
+	if (board_is_evm_sk()) {
+		/*
+		 * EVM SK 1.2A and later use gpio0_7 to enable DDR3.
+		 * This is safe enough to do on older revs.
+		 */
+		gpio_request(GPIO_DDR_VTT_EN, "ddr_vtt_en");
+		gpio_direction_output(GPIO_DDR_VTT_EN, 1);
+	}
+
+	if (board_is_evm_sk() || board_is_bone_lt())
+		config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
+			   &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data);
+	else
+		config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data,
+			   &ddr2_cmd_ctrl_data, &ddr2_emif_reg_data);
+#endif
+}
+
+/*
+ * Basic board specific setup.  Pinmux has been handled already.
+ */
+int board_init(void)
+{
+	i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
+	if (read_eeprom() < 0)
+		puts("Could not get board ID.\n");
+
+	gd->bd->bi_boot_params = PHYS_DRAM_1 + 0x100;
+
+	return 0;
+}
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+#ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
+	char safe_string[HDR_NAME_LEN + 1];
+
+	/* Now set variables based on the header. */
+	strncpy(safe_string, (char *)header.name, sizeof(header.name));
+	safe_string[sizeof(header.name)] = 0;
+	setenv("board_name", safe_string);
+
+	strncpy(safe_string, (char *)header.version, sizeof(header.version));
+	safe_string[sizeof(header.version)] = 0;
+	setenv("board_rev", safe_string);
+#endif
+
+	return 0;
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_CPSW
+static void cpsw_control(int enabled)
+{
+	/* VTP can be added here */
+
+	return;
+}
+
+static struct cpsw_slave_data cpsw_slaves[] = {
+	{
+		.slave_reg_ofs	= 0x208,
+		.sliver_reg_ofs	= 0xd80,
+		.phy_id		= 0,
+	},
+	{
+		.slave_reg_ofs	= 0x308,
+		.sliver_reg_ofs	= 0xdc0,
+		.phy_id		= 1,
+	},
+};
+
+static struct cpsw_platform_data cpsw_data = {
+	.mdio_base		= AM335X_CPSW_MDIO_BASE,
+	.cpsw_base		= AM335X_CPSW_BASE,
+	.mdio_div		= 0xff,
+	.channels		= 8,
+	.cpdma_reg_ofs		= 0x800,
+	.slaves			= 1,
+	.slave_data		= cpsw_slaves,
+	.ale_reg_ofs		= 0xd00,
+	.ale_entries		= 1024,
+	.host_port_reg_ofs	= 0x108,
+	.hw_stats_reg_ofs	= 0x900,
+	.mac_control		= (1 << 5),
+	.control		= cpsw_control,
+	.host_port_num		= 0,
+	.version		= CPSW_CTRL_VERSION_2,
+};
+
+int board_eth_init(bd_t *bis)
+{
+	uint8_t mac_addr[6];
+	uint32_t mac_hi, mac_lo;
+
+	if (!eth_getenv_enetaddr("ethaddr", mac_addr)) {
+		debug("<ethaddr> not set. Reading from E-fuse\n");
+		/* try reading mac address from efuse */
+		mac_lo = readl(&cdev->macid0l);
+		mac_hi = readl(&cdev->macid0h);
+		mac_addr[0] = mac_hi & 0xFF;
+		mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+		mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+		mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+		mac_addr[4] = mac_lo & 0xFF;
+		mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+		if (is_valid_ether_addr(mac_addr))
+			eth_setenv_enetaddr("ethaddr", mac_addr);
+		else
+			return -1;
+	}
+
+	if (board_is_bone() || board_is_bone_lt() || board_is_idk()) {
+		writel(MII_MODE_ENABLE, &cdev->miisel);
+		cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
+				PHY_INTERFACE_MODE_MII;
+	} else {
+		writel(RGMII_MODE_ENABLE, &cdev->miisel);
+		cpsw_slaves[0].phy_if = cpsw_slaves[1].phy_if =
+				PHY_INTERFACE_MODE_RGMII;
+	}
+
+	return cpsw_register(&cpsw_data);
+}
+#endif
diff --git a/board/ti/am335x/board.h b/board/ti/am335x/board.h
new file mode 100644
index 0000000..48e112e
--- /dev/null
+++ b/board/ti/am335x/board.h
@@ -0,0 +1,54 @@
+/*
+ * board.h
+ *
+ * TI AM335x boards information header
+ *
+ * Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _BOARD_H_
+#define _BOARD_H_
+
+/*
+ * TI AM335x parts define a system EEPROM that defines certain sub-fields.
+ * We use these fields to in turn see what board we are on, and what
+ * that might require us to set or not set.
+ */
+#define HDR_NO_OF_MAC_ADDR	3
+#define HDR_ETH_ALEN		6
+#define HDR_NAME_LEN		8
+
+struct am335x_baseboard_id {
+	unsigned int  magic;
+	char name[HDR_NAME_LEN];
+	char version[4];
+	char serial[12];
+	char config[32];
+	char mac_addr[HDR_NO_OF_MAC_ADDR][HDR_ETH_ALEN];
+};
+
+/*
+ * We have three pin mux functions that must exist.  We must be able to enable
+ * uart0, for initial output and i2c0 to read the main EEPROM.  We then have a
+ * main pinmux function that can be overridden to enable all other pinmux that
+ * is required on the board.
+ */
+void enable_uart0_pin_mux(void);
+void enable_uart1_pin_mux(void);
+void enable_uart2_pin_mux(void);
+void enable_uart3_pin_mux(void);
+void enable_uart4_pin_mux(void);
+void enable_uart5_pin_mux(void);
+void enable_i2c0_pin_mux(void);
+void enable_board_pin_mux(struct am335x_baseboard_id *header);
+#endif
diff --git a/board/ti/am335x/mux.c b/board/ti/am335x/mux.c
index 80becd5..8437ef5 100644
--- a/board/ti/am335x/mux.c
+++ b/board/ti/am335x/mux.c
@@ -16,242 +16,10 @@
 #include <common.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/hardware.h>
+#include <asm/arch/mux.h>
 #include <asm/io.h>
 #include <i2c.h>
-
-#define MUX_CFG(value, offset)	\
-	__raw_writel(value, (CTRL_BASE + offset));
-
-/* PAD Control Fields */
-#define SLEWCTRL	(0x1 << 6)
-#define RXACTIVE	(0x1 << 5)
-#define PULLUP_EN	(0x1 << 4) /* Pull UP Selection */
-#define PULLUDEN	(0x0 << 3) /* Pull up enabled */
-#define PULLUDDIS	(0x1 << 3) /* Pull up disabled */
-#define MODE(val)	val	/* used for Readability */
-
-/*
- * PAD CONTROL OFFSETS
- * Field names corresponds to the pad signal name
- */
-struct pad_signals {
-	int gpmc_ad0;
-	int gpmc_ad1;
-	int gpmc_ad2;
-	int gpmc_ad3;
-	int gpmc_ad4;
-	int gpmc_ad5;
-	int gpmc_ad6;
-	int gpmc_ad7;
-	int gpmc_ad8;
-	int gpmc_ad9;
-	int gpmc_ad10;
-	int gpmc_ad11;
-	int gpmc_ad12;
-	int gpmc_ad13;
-	int gpmc_ad14;
-	int gpmc_ad15;
-	int gpmc_a0;
-	int gpmc_a1;
-	int gpmc_a2;
-	int gpmc_a3;
-	int gpmc_a4;
-	int gpmc_a5;
-	int gpmc_a6;
-	int gpmc_a7;
-	int gpmc_a8;
-	int gpmc_a9;
-	int gpmc_a10;
-	int gpmc_a11;
-	int gpmc_wait0;
-	int gpmc_wpn;
-	int gpmc_be1n;
-	int gpmc_csn0;
-	int gpmc_csn1;
-	int gpmc_csn2;
-	int gpmc_csn3;
-	int gpmc_clk;
-	int gpmc_advn_ale;
-	int gpmc_oen_ren;
-	int gpmc_wen;
-	int gpmc_be0n_cle;
-	int lcd_data0;
-	int lcd_data1;
-	int lcd_data2;
-	int lcd_data3;
-	int lcd_data4;
-	int lcd_data5;
-	int lcd_data6;
-	int lcd_data7;
-	int lcd_data8;
-	int lcd_data9;
-	int lcd_data10;
-	int lcd_data11;
-	int lcd_data12;
-	int lcd_data13;
-	int lcd_data14;
-	int lcd_data15;
-	int lcd_vsync;
-	int lcd_hsync;
-	int lcd_pclk;
-	int lcd_ac_bias_en;
-	int mmc0_dat3;
-	int mmc0_dat2;
-	int mmc0_dat1;
-	int mmc0_dat0;
-	int mmc0_clk;
-	int mmc0_cmd;
-	int mii1_col;
-	int mii1_crs;
-	int mii1_rxerr;
-	int mii1_txen;
-	int mii1_rxdv;
-	int mii1_txd3;
-	int mii1_txd2;
-	int mii1_txd1;
-	int mii1_txd0;
-	int mii1_txclk;
-	int mii1_rxclk;
-	int mii1_rxd3;
-	int mii1_rxd2;
-	int mii1_rxd1;
-	int mii1_rxd0;
-	int rmii1_refclk;
-	int mdio_data;
-	int mdio_clk;
-	int spi0_sclk;
-	int spi0_d0;
-	int spi0_d1;
-	int spi0_cs0;
-	int spi0_cs1;
-	int ecap0_in_pwm0_out;
-	int uart0_ctsn;
-	int uart0_rtsn;
-	int uart0_rxd;
-	int uart0_txd;
-	int uart1_ctsn;
-	int uart1_rtsn;
-	int uart1_rxd;
-	int uart1_txd;
-	int i2c0_sda;
-	int i2c0_scl;
-	int mcasp0_aclkx;
-	int mcasp0_fsx;
-	int mcasp0_axr0;
-	int mcasp0_ahclkr;
-	int mcasp0_aclkr;
-	int mcasp0_fsr;
-	int mcasp0_axr1;
-	int mcasp0_ahclkx;
-	int xdma_event_intr0;
-	int xdma_event_intr1;
-	int nresetin_out;
-	int porz;
-	int nnmi;
-	int osc0_in;
-	int osc0_out;
-	int rsvd1;
-	int tms;
-	int tdi;
-	int tdo;
-	int tck;
-	int ntrst;
-	int emu0;
-	int emu1;
-	int osc1_in;
-	int osc1_out;
-	int pmic_power_en;
-	int rtc_porz;
-	int rsvd2;
-	int ext_wakeup;
-	int enz_kaldo_1p8v;
-	int usb0_dm;
-	int usb0_dp;
-	int usb0_ce;
-	int usb0_id;
-	int usb0_vbus;
-	int usb0_drvvbus;
-	int usb1_dm;
-	int usb1_dp;
-	int usb1_ce;
-	int usb1_id;
-	int usb1_vbus;
-	int usb1_drvvbus;
-	int ddr_resetn;
-	int ddr_csn0;
-	int ddr_cke;
-	int ddr_ck;
-	int ddr_nck;
-	int ddr_casn;
-	int ddr_rasn;
-	int ddr_wen;
-	int ddr_ba0;
-	int ddr_ba1;
-	int ddr_ba2;
-	int ddr_a0;
-	int ddr_a1;
-	int ddr_a2;
-	int ddr_a3;
-	int ddr_a4;
-	int ddr_a5;
-	int ddr_a6;
-	int ddr_a7;
-	int ddr_a8;
-	int ddr_a9;
-	int ddr_a10;
-	int ddr_a11;
-	int ddr_a12;
-	int ddr_a13;
-	int ddr_a14;
-	int ddr_a15;
-	int ddr_odt;
-	int ddr_d0;
-	int ddr_d1;
-	int ddr_d2;
-	int ddr_d3;
-	int ddr_d4;
-	int ddr_d5;
-	int ddr_d6;
-	int ddr_d7;
-	int ddr_d8;
-	int ddr_d9;
-	int ddr_d10;
-	int ddr_d11;
-	int ddr_d12;
-	int ddr_d13;
-	int ddr_d14;
-	int ddr_d15;
-	int ddr_dqm0;
-	int ddr_dqm1;
-	int ddr_dqs0;
-	int ddr_dqsn0;
-	int ddr_dqs1;
-	int ddr_dqsn1;
-	int ddr_vref;
-	int ddr_vtp;
-	int ddr_strben0;
-	int ddr_strben1;
-	int ain7;
-	int ain6;
-	int ain5;
-	int ain4;
-	int ain3;
-	int ain2;
-	int ain1;
-	int ain0;
-	int vrefp;
-	int vrefn;
-};
-
-struct module_pin_mux {
-	short reg_offset;
-	unsigned char val;
-};
-
-/* Pad control register offset */
-#define PAD_CTRL_BASE	0x800
-#define OFFSET(x)	(unsigned int) (&((struct pad_signals *) \
-				(PAD_CTRL_BASE))->x)
+#include "board.h"
 
 static struct module_pin_mux uart0_pin_mux[] = {
 	{OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART0_RXD */
@@ -259,6 +27,36 @@
 	{-1},
 };
 
+static struct module_pin_mux uart1_pin_mux[] = {
+	{OFFSET(uart1_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)},	/* UART1_RXD */
+	{OFFSET(uart1_txd), (MODE(0) | PULLUDEN)},		/* UART1_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart2_pin_mux[] = {
+	{OFFSET(spi0_sclk), (MODE(1) | PULLUP_EN | RXACTIVE)},	/* UART2_RXD */
+	{OFFSET(spi0_d0), (MODE(1) | PULLUDEN)},		/* UART2_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart3_pin_mux[] = {
+	{OFFSET(spi0_cs1), (MODE(1) | PULLUP_EN | RXACTIVE)},	/* UART3_RXD */
+	{OFFSET(ecap0_in_pwm0_out), (MODE(1) | PULLUDEN)},	/* UART3_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart4_pin_mux[] = {
+	{OFFSET(gpmc_wait0), (MODE(6) | PULLUP_EN | RXACTIVE)},	/* UART4_RXD */
+	{OFFSET(gpmc_wpn), (MODE(6) | PULLUDEN)},		/* UART4_TXD */
+	{-1},
+};
+
+static struct module_pin_mux uart5_pin_mux[] = {
+	{OFFSET(lcd_data9), (MODE(4) | PULLUP_EN | RXACTIVE)},	/* UART5_RXD */
+	{OFFSET(lcd_data8), (MODE(4) | PULLUDEN)},		/* UART5_TXD */
+	{-1},
+};
+
 static struct module_pin_mux mmc0_pin_mux[] = {
 	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
 	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
@@ -271,6 +69,17 @@
 	{-1},
 };
 
+static struct module_pin_mux mmc0_no_cd_pin_mux[] = {
+	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
+	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
+	{OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT1 */
+	{OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT0 */
+	{OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CLK */
+	{OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_CMD */
+	{OFFSET(mcasp0_aclkr), (MODE(4) | RXACTIVE)},		/* MMC0_WP */
+	{-1},
+};
+
 static struct module_pin_mux mmc0_pin_mux_sk_evm[] = {
 	{OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT3 */
 	{OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)},	/* MMC0_DAT2 */
@@ -362,25 +171,35 @@
 	{-1},
 };
 
-/*
- * Configure the pin mux for the module
- */
-static void configure_module_pin_mux(struct module_pin_mux *mod_pin_mux)
-{
-	int i;
-
-	if (!mod_pin_mux)
-		return;
-
-	for (i = 0; mod_pin_mux[i].reg_offset != -1; i++)
-		MUX_CFG(mod_pin_mux[i].val, mod_pin_mux[i].reg_offset);
-}
-
 void enable_uart0_pin_mux(void)
 {
 	configure_module_pin_mux(uart0_pin_mux);
 }
 
+void enable_uart1_pin_mux(void)
+{
+	configure_module_pin_mux(uart1_pin_mux);
+}
+
+void enable_uart2_pin_mux(void)
+{
+	configure_module_pin_mux(uart2_pin_mux);
+}
+
+void enable_uart3_pin_mux(void)
+{
+	configure_module_pin_mux(uart3_pin_mux);
+}
+
+void enable_uart4_pin_mux(void)
+{
+	configure_module_pin_mux(uart4_pin_mux);
+}
+
+void enable_uart5_pin_mux(void)
+{
+	configure_module_pin_mux(uart5_pin_mux);
+}
 
 void enable_i2c0_pin_mux(void)
 {
@@ -442,12 +261,27 @@
 			configure_module_pin_mux(mmc1_pin_mux);
 			configure_module_pin_mux(spi0_pin_mux);
 		}
+	} else if (!strncmp(header->config, "SKU#02", 6)) {
+		/*
+		 * Industrial Motor Control (IDK)
+		 * note: IDK console is on UART3 by default.
+		 *       So u-boot mus be build with CONFIG_SERIAL4 and
+		 *       CONFIG_CONS_INDEX=4
+		 */
+		configure_module_pin_mux(mii1_pin_mux);
+		configure_module_pin_mux(mmc0_no_cd_pin_mux);
 	} else if (!strncmp(header->name, "A335X_SK", HDR_NAME_LEN)) {
 		/* Starter Kit EVM */
 		configure_module_pin_mux(i2c1_pin_mux);
 		configure_module_pin_mux(gpio0_7_pin_mux);
 		configure_module_pin_mux(rgmii1_pin_mux);
 		configure_module_pin_mux(mmc0_pin_mux_sk_evm);
+	} else if (!strncmp(header->name, "A335BNLT", HDR_NAME_LEN)) {
+		/* Beaglebone LT pinmux */
+		configure_module_pin_mux(i2c1_pin_mux);
+		configure_module_pin_mux(mii1_pin_mux);
+		configure_module_pin_mux(mmc0_pin_mux);
+		configure_module_pin_mux(mmc1_pin_mux);
 	} else {
 		puts("Unknown board, cannot configure pinmux.");
 		hang();
diff --git a/board/ti/omap2420h4/omap2420h4.c b/board/ti/omap2420h4/omap2420h4.c
index a3983e3..188e4ac 100644
--- a/board/ti/omap2420h4/omap2420h4.c
+++ b/board/ti/omap2420h4/omap2420h4.c
@@ -153,7 +153,7 @@
  ******************************************************************/
 void ether_init (void)
 {
-#ifdef CONFIG_DRIVER_LAN91C96
+#ifdef CONFIG_LAN91C96
 	int cnt = 20;
 
 	__raw_writeb(0x3,OMAP2420_CTRL_BASE+0x10a); /*protect->gpio95 */
diff --git a/board/toradex/colibri_t20-common/colibri_t20-common.c b/board/toradex/colibri_t20-common/colibri_t20-common.c
new file mode 100644
index 0000000..6d5e47d
--- /dev/null
+++ b/board/toradex/colibri_t20-common/colibri_t20-common.c
@@ -0,0 +1,44 @@
+/*
+ *  Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/board.h>
+
+#include "colibri_t20-common.h"
+
+#ifdef CONFIG_USB_EHCI_TEGRA
+void colibri_t20_common_pin_mux_usb(void)
+{
+	/* module internal USB bus to connect ethernet chipset */
+	funcmux_select(PERIPH_ID_USB2, FUNCMUX_USB2_ULPI);
+	/* ULPI reference clock output */
+	pinmux_set_func(PINGRP_CDEV2, PMUX_FUNC_PLLP_OUT4);
+	pinmux_tristate_disable(PINGRP_CDEV2);
+	/* PHY reset GPIO */
+	pinmux_tristate_disable(PINGRP_UAC);
+	/* VBus GPIO */
+	pinmux_tristate_disable(PINGRP_DTE);
+}
+#endif
+
+#ifdef CONFIG_TEGRA_NAND
+void pin_mux_nand(void)
+{
+	funcmux_select(PERIPH_ID_NDFLASH, FUNCMUX_NDFLASH_KBC_8_BIT);
+}
+#endif
diff --git a/board/toradex/colibri_t20-common/colibri_t20-common.h b/board/toradex/colibri_t20-common/colibri_t20-common.h
new file mode 100644
index 0000000..76dc860
--- /dev/null
+++ b/board/toradex/colibri_t20-common/colibri_t20-common.h
@@ -0,0 +1,16 @@
+/*
+ *  Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+void colibri_t20_common_pin_mux_usb(void);
diff --git a/board/toradex/colibri_t20_iris/Makefile b/board/toradex/colibri_t20_iris/Makefile
new file mode 100644
index 0000000..c138729
--- /dev/null
+++ b/board/toradex/colibri_t20_iris/Makefile
@@ -0,0 +1,40 @@
+#
+#  (C) Copyright 2012 Lucas Stach
+#
+#  This program is free software; you can redistribute it and/or
+#  modify it under the terms of the GNU General Public License as
+#  published by the Free Software Foundation; either version 2 of
+#  the License, or (at your option) any later version.
+#
+#  This program is distributed in the hope that it will be useful,
+#  but WITHOUT ANY WARRANTY; without even the implied warranty of
+#  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+#  GNU General Public License for more details.
+#
+#
+
+include $(TOPDIR)/config.mk
+
+$(shell mkdir -p $(obj)../../nvidia/common)
+$(shell mkdir -p $(obj)../colibri_t20-common)
+
+LIB	= $(obj)lib$(BOARD).o
+
+COBJS	:= ../../nvidia/common/board.o
+COBJS	+= ../colibri_t20-common/colibri_t20-common.o
+COBJS	+= $(BOARD).o
+
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/toradex/colibri_t20_iris/colibri_t20_iris.c b/board/toradex/colibri_t20_iris/colibri_t20_iris.c
new file mode 100644
index 0000000..e40a986
--- /dev/null
+++ b/board/toradex/colibri_t20_iris/colibri_t20_iris.c
@@ -0,0 +1,46 @@
+/*
+ *  Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <common.h>
+#include <asm/gpio.h>
+#include <asm/arch/clock.h>
+#include <asm/arch/funcmux.h>
+#include <asm/arch/pinmux.h>
+#include <asm/arch-tegra/board.h>
+#include <asm/arch-tegra/mmc.h>
+
+#include "../colibri_t20-common/colibri_t20-common.h"
+
+#ifdef CONFIG_USB_EHCI_TEGRA
+void pin_mux_usb(void)
+{
+	colibri_t20_common_pin_mux_usb();
+
+	/* USB 1 aka Tegra USB port 3 VBus*/
+	pinmux_tristate_disable(PINGRP_SPIG);
+}
+#endif
+
+#ifdef CONFIG_TEGRA_MMC
+int board_mmc_init(bd_t *bd)
+{
+	funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_4_BIT);
+	pinmux_tristate_disable(PINGRP_GMB);
+
+	tegra_mmc_init(0, 4, -1, GPIO_PC7);
+
+	return 0;
+}
+#endif
diff --git a/board/toradex/dts/tegra20-colibri_t20_iris.dts b/board/toradex/dts/tegra20-colibri_t20_iris.dts
new file mode 100644
index 0000000..c29b43a
--- /dev/null
+++ b/board/toradex/dts/tegra20-colibri_t20_iris.dts
@@ -0,0 +1,38 @@
+/dts-v1/;
+
+/include/ ARCH_CPU_DTS
+
+/ {
+	model = "Toradex Colibri T20";
+	compatible = "toradex,t20", "nvidia,tegra20";
+
+	aliases {
+		usb0 = "/usb@c5008000";
+		usb1 = "/usb@c5000000";
+		usb2 = "/usb@c5004000";
+	};
+
+	usb@c5000000 {
+		dr_mode = "otg";
+	};
+
+	usb@c5004000 {
+		nvidia,phy-reset-gpio = <&gpio 169 0>; /* PV1 */
+		nvidia,vbus-gpio = <&gpio 217 0>; /* PBB1 */
+	};
+
+	usb@c5008000 {
+		nvidia,vbus-gpio = <&gpio 178 1>; /* PW2 low-active */
+	};
+
+	nand-controller@70008000 {
+		nvidia,wp-gpios = <&gpio 144 0>; /* PS0 */
+		nvidia,width = <8>;
+		nvidia,timing = <15 100 25 80 25 10 15 10 100>;
+
+		nand@0 {
+			reg = <0>;
+			compatible = "nand-flash";
+		};
+	};
+};
diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds
index e905c26..e1e1ccd 100644
--- a/board/tqc/tqm8xx/u-boot.lds
+++ b/board/tqc/tqm8xx/u-boot.lds
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2012
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -41,8 +41,6 @@
     drivers/net/libnet.o		(.text*)
     drivers/pcmcia/libpcmcia.o		(.text.pcmcia_on)
     drivers/pcmcia/libpcmcia.o		(.text.pcmcia_hardware_enable)
-    drivers/rtc/librtc.o		(.text*)
-    drivers/misc/libmisc.o		(.text*)
 
     . = DEFINED(env_offset) ? env_offset : .;
     common/env_embedded.o	(.ppcenv*)
@@ -81,9 +79,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/trizepsiv/conxs.c b/board/trizepsiv/conxs.c
index 871e052..c3dee84 100644
--- a/board/trizepsiv/conxs.c
+++ b/board/trizepsiv/conxs.c
@@ -34,6 +34,7 @@
 #include <common.h>
 #include <asm/arch/pxa-regs.h>
 #include <asm/arch/pxa.h>
+#include <asm/arch/regs-mmc.h>
 #include <netdev.h>
 #include <asm/io.h>
 
@@ -152,3 +153,11 @@
 	return dm9000_initialize(bis);
 }
 #endif
+
+#ifdef CONFIG_CMD_MMC
+int board_mmc_init(bd_t *bis)
+{
+	pxa_mmc_register(0);
+	return 0;
+}
+#endif
diff --git a/board/v37/u-boot.lds b/board/v37/u-boot.lds
index e62d53d..fd2d72e 100644
--- a/board/v37/u-boot.lds
+++ b/board/v37/u-boot.lds
@@ -66,9 +66,11 @@
   PROVIDE (edata = .);
 
   . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   . = .;
diff --git a/board/vpac270/u-boot-spl.lds b/board/vpac270/u-boot-spl.lds
index 1958c2f..20161a4 100644
--- a/board/vpac270/u-boot-spl.lds
+++ b/board/vpac270/u-boot-spl.lds
@@ -57,6 +57,10 @@
 		*(.data)
 	}
 
+	.u_boot_list : {
+		#include <u-boot.lst>
+	}
+
 	. = ALIGN(4);
 
 	.rel.dyn : {
diff --git a/board/w7o/u-boot.lds.debug b/board/w7o/u-boot.lds.debug
index 1c67b30..2ce5a9a 100644
--- a/board/w7o/u-boot.lds.debug
+++ b/board/w7o/u-boot.lds.debug
@@ -106,9 +106,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/board/westel/amx860/Makefile b/board/westel/amx860/Makefile
deleted file mode 100644
index 12e4aa6..0000000
--- a/board/westel/amx860/Makefile
+++ /dev/null
@@ -1,44 +0,0 @@
-#
-# (C) Copyright 2001-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB	= $(obj)lib$(BOARD).o
-
-COBJS	= $(BOARD).o flash.o
-
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
-
-$(LIB):	$(obj).depend $(OBJS)
-	$(call cmd_link_o_target, $(OBJS))
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
diff --git a/board/westel/amx860/amx860.c b/board/westel/amx860/amx860.c
deleted file mode 100644
index 91dcc0d..0000000
--- a/board/westel/amx860/amx860.c
+++ /dev/null
@@ -1,93 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <mpc8xx.h>
-
-/* ------------------------------------------------------------------------- */
-
-#define	_NOT_USED_	0xFFFFFFFF
-
-const uint edo_60ns[] =
-{ 0x8ffbec24, 0x0ff3ec04, 0x0cf3ec04, 0x00f3ec04,
-  0x00f3ec00, 0x37f7ec47, _NOT_USED_, _NOT_USED_,
-  0x8fffec24, 0x0ffbec04, 0x08f3ec04, 0x07f3ec08,
-  0x08f3ec04, 0x07f3ec48, 0x08f3ec04, 0x07f3ec48,
-  0x08f3ec04, 0x07f3ec48, 0x1ff7ec47, _NOT_USED_,
-  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-  0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x11bfcc47,
-  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-  0x8fffcc24, 0x0fefcc04, 0x0cafcc00, 0x03afcc4c,
-  0x0cafcc00, 0x03afcc4c, 0x0cafcc00, 0x03afcc4c,
-  0x0cafcc00, 0x33bfcc4f, _NOT_USED_, _NOT_USED_,
-  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-  0xc0ffcc84, 0x00ffcc04, 0x07ffcc04, 0x3fffcc06,
-  0xffffcc85, 0xffffcc05, _NOT_USED_, _NOT_USED_,
-  _NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
-  0x33ffcc07, _NOT_USED_, _NOT_USED_, _NOT_USED_ };
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	puts ("Board: AMX860\n");
-	return 0;
-}
-
-/* ------------------------------------------------------------------------- */
-
-phys_size_t initdram (int board_type)
-{
-
-	volatile immap_t     *immap = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-
-	/* AMX860: has 4 Mb of 60ns EDO DRAM, so start DRAM at 0 */
-
-	upmconfig(UPMA, (uint *) edo_60ns, sizeof(edo_60ns)/sizeof(uint));
-
-#ifndef CONFIG_AMX_RAM_EXT
-	memctl->memc_mptpr = 0x0400; /* divide by 16 */
-#else
-	memctl->memc_mptpr = 0x0200;
-#endif
-
-	memctl->memc_mamr = 0x30a21114;
-	memctl->memc_or2 = 0xffc00800;
-#ifndef CONFIG_AMX_RAM_EXT
-	memctl->memc_br2 = 0x81;
-
-	return (4 << 20);
-#else
-	memctl->memc_or1 = 0xff000800;
-	memctl->memc_br1 = 0x00000081;
-	memctl->memc_br2 = 0x01000081;
-
-	return (20 << 20);
-#endif
-}
diff --git a/board/westel/amx860/flash.c b/board/westel/amx860/flash.c
deleted file mode 100644
index fe8bce4..0000000
--- a/board/westel/amx860/flash.c
+++ /dev/null
@@ -1,637 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <mpc8xx.h>
-
-flash_info_t	flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-#if defined(CONFIG_ENV_IS_IN_FLASH)
-# ifndef  CONFIG_ENV_ADDR
-#  define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET)
-# endif
-# ifndef  CONFIG_ENV_SIZE
-#  define CONFIG_ENV_SIZE	CONFIG_ENV_SECT_SIZE
-# endif
-# ifndef  CONFIG_ENV_SECT_SIZE
-#  define CONFIG_ENV_SECT_SIZE  CONFIG_ENV_SIZE
-# endif
-#endif
-
-/*---------------------------------------------------------------------*/
-#undef DEBUG_FLASH
-
-#ifdef DEBUG_FLASH
-#define DEBUGF(fmt,args...) printf(fmt ,##args)
-#else
-#define DEBUGF(fmt,args...)
-#endif
-/*---------------------------------------------------------------------*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
-	volatile memctl8xx_t *memctl = &immap->im_memctl;
-	unsigned long size_b0, size_b1;
-	int i;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	DEBUGF("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-#if defined(FLASH_BASE1_PRELIM) && (FLASH_BASE1_PRELIM != 0)
-	DEBUGF("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE1_PRELIM);
-
-	size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
-	if (size_b1 > size_b0) {
-		printf ("## ERROR: "
-			"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
-			size_b1, size_b1<<20,
-			size_b0, size_b0<<20
-		);
-		flash_info[0].flash_id	= FLASH_UNKNOWN;
-		flash_info[1].flash_id	= FLASH_UNKNOWN;
-		flash_info[0].sector_count	= -1;
-		flash_info[1].sector_count	= -1;
-		flash_info[0].size		= 0;
-		flash_info[1].size		= 0;
-		return (0);
-	}
-#else
-	size_b1 = 0;
-#endif	/* FLASH_BASE1_PRELIM */
-
-	DEBUGF("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
-	DEBUGF ("## Before remap: "
-		"BR0: 0x%08x    OR0: 0x%08x    "
-		"BR1: 0x%08x    OR1: 0x%08x\n",
-		memctl->memc_br0, memctl->memc_or0,
-		memctl->memc_br1, memctl->memc_or1);
-
-	/* Remap FLASH according to real size */
-	memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
-	memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
-
-	DEBUGF("## BR0: 0x%08x    OR0: 0x%08x\n",
-		memctl->memc_br0, memctl->memc_or0);
-
-	/* Re-do sizing to get full correct info */
-	size_b0 = flash_get_size((vu_long *)CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]);
-
-	flash_info[0].size = size_b0;
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-	/* monitor protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_SYS_MONITOR_BASE,
-		      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-		      &flash_info[0]);
-#endif
-
-#ifdef	CONFIG_ENV_IS_IN_FLASH
-	/* ENV protection ON by default */
-	flash_protect(FLAG_PROTECT_SET,
-		      CONFIG_ENV_ADDR,
-		      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-		      &flash_info[0]);
-#endif
-
-	if (size_b1) {
-		memctl->memc_or1 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b1 & OR_AM_MSK);
-		memctl->memc_br1 = ((CONFIG_SYS_FLASH_BASE + size_b0) & BR_BA_MSK) |
-				   BR_MS_GPCM | BR_V;
-
-		DEBUGF("## BR1: 0x%08x    OR1: 0x%08x\n",
-			memctl->memc_br1, memctl->memc_or1);
-
-		/* Re-do sizing to get full correct info */
-		size_b1 = flash_get_size((vu_long *)(CONFIG_SYS_FLASH_BASE + size_b0),
-					  &flash_info[1]);
-
-		flash_info[1].size = size_b1;
-
-		flash_get_offsets (CONFIG_SYS_FLASH_BASE + size_b0, &flash_info[1]);
-
-# if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-		/* monitor protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_SYS_MONITOR_BASE,
-			      CONFIG_SYS_MONITOR_BASE+monitor_flash_len-1,
-			      &flash_info[1]);
-# endif
-
-# ifdef CONFIG_ENV_IS_IN_FLASH
-		/* ENV protection ON by default */
-		flash_protect(FLAG_PROTECT_SET,
-			      CONFIG_ENV_ADDR,
-			      CONFIG_ENV_ADDR+CONFIG_ENV_SECT_SIZE-1,
-			      &flash_info[1]);
-#endif
-	} else {
-#ifndef CONFIG_AMX_RAM_EXT
-		memctl->memc_br1 = 0;		/* invalidate bank */
-		memctl->memc_or1 = 0;		/* invalidate bank */
-#endif
-
-		DEBUGF("## DISABLE BR1: 0x%08x    OR1: 0x%08x\n",
-			memctl->memc_br1, memctl->memc_or1);
-
-		flash_info[1].flash_id = FLASH_UNKNOWN;
-		flash_info[1].sector_count = -1;
-		flash_info[1].size = 0;
-	}
-
-	DEBUGF("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
-
-	return (size_b0 + size_b1);
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM040) {
-		/* set sector offsets for uniform sector type	*/
-		for (i = 0; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00040000);
-		}
-	} else if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_BM:	printf ("BRIGHT MICRO ");	break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:	printf ("29F040 or 29LV040 (4 Mbit, uniform sectors)\n");
-				break;
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		if ((i % 5) == 0)
-			printf ("\n   ");
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-		);
-	}
-	printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	ulong value;
-	ulong base = (ulong)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00900090;
-
-	value = addr[0];
-
-	DEBUGF("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
-
-	switch (value) {
-	case AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-	value = addr[1];			/* device ID		*/
-
-	DEBUGF("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
-
-	switch (value) {
-	case AMD_ID_F040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-
-	case AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-#if 0	/* enable when device IDs are available */
-	case AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-
-	case AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00800000;
-		break;				/* => 8 MB		*/
-#endif
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-	}
-
-	/* set up sector start address table */
-	if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00008000;
-		info->start[2] = base + 0x0000C000;
-		info->start[3] = base + 0x00010000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00020000) - 0x00060000;
-		}
-	} else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00008000;
-		info->start[i--] = base + info->size - 0x0000C000;
-		info->start[i--] = base + info->size - 0x00010000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00020000;
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-		addr = (volatile unsigned long *)(info->start[i]);
-		info->protect[i] = addr[2] & 1;
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		addr = (volatile unsigned long *)info->start[0];
-
-		*addr = 0x00F000F0;	/* reset bank */
-	}
-
-	return (info->size);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	int flag, prot, sect, l_sect;
-	ulong start, now, last;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if ((info->flash_id == FLASH_UNKNOWN) ||
-	    (info->flash_id > FLASH_AMD_COMP)) {
-		printf ("Can't erase unknown flash type %08lx - aborted\n",
-			info->flash_id);
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00800080;
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr = (vu_long*)(info->start[sect]);
-			addr[0] = 0x00300030;
-			l_sect = sect;
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-
-	start = get_timer (0);
-	last  = start;
-	addr = (vu_long*)(info->start[l_sect]);
-	while ((addr[0] & 0x00800080) != 0x00800080) {
-		if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return 1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-
-DONE:
-	/* reset to read mode */
-	addr = (volatile unsigned long *)info->start[0];
-	addr[0] = 0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t *info, ulong dest, ulong data)
-{
-	vu_long *addr = (vu_long*)(info->start[0]);
-	ulong start;
-	int flag;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((vu_long *)dest) & data) != data) {
-		return (2);
-	}
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	addr[0x0555] = 0x00AA00AA;
-	addr[0x02AA] = 0x00550055;
-	addr[0x0555] = 0x00A000A0;
-
-	*((vu_long *)dest) = data;
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* data polling for D7 */
-	start = get_timer (0);
-	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
-		if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
-			return (1);
-		}
-	}
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/westel/amx860/u-boot.lds b/board/westel/amx860/u-boot.lds
deleted file mode 100644
index 3470b43..0000000
--- a/board/westel/amx860/u-boot.lds
+++ /dev/null
@@ -1,105 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text*)
-    arch/powerpc/cpu/mpc8xx/traps.o	(.text*)
-    net/libnet.o			(.text*)
-    board/westel/amx860/libamx860.o	(.text*)
-    *(.text.*printf)
-
-    . = env_offset;
-    common/env_embedded.o		(.text*)
-
-    *(.text*)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*)))
-  }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    _GOT2_TABLE_ = .;
-    KEEP(*(.got2))
-    KEEP(*(.got))
-    PROVIDE(_GLOBAL_OFFSET_TABLE_ = . + 4);
-    _FIXUP_TABLE_ = .;
-    KEEP(*(.fixup))
-  }
-  __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data*)
-    *(.sdata*)
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   *(.bss*)
-   *(.sbss*)
-   *(COMMON)
-   . = ALIGN(4);
-  }
-  __bss_end__ = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/westel/amx860/u-boot.lds.debug b/board/westel/amx860/u-boot.lds.debug
deleted file mode 100644
index 91d3e67..0000000
--- a/board/westel/amx860/u-boot.lds.debug
+++ /dev/null
@@ -1,136 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    arch/powerpc/cpu/mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib/vsprintf.o	(.text)
-    lib/crc32.o		(.text)
-    arch/powerpc/lib/extable.o	(.text)
-
-    . = env_offset;
-    common/env_embedded.o(.text)
-
-    *(.text)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-    *(.eh_frame)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  __bss_end__ = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/xes/xpedite1000/u-boot.lds.debug b/board/xes/xpedite1000/u-boot.lds.debug
index e2e66ae..c4e5706 100644
--- a/board/xes/xpedite1000/u-boot.lds.debug
+++ b/board/xes/xpedite1000/u-boot.lds.debug
@@ -111,9 +111,11 @@
   _edata  =  .;
   PROVIDE (edata = .);
 
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
+
+  . = ALIGN(4);
+  .u_boot_list : {
+	#include <u-boot.lst>
+  }
 
 
   __start___ex_table = .;
diff --git a/boards.cfg b/boards.cfg
index 04ecdeb..6f21af0 100644
--- a/boards.cfg
+++ b/boards.cfg
@@ -227,7 +227,12 @@
 integratorap_cm946es         arm         arm946es    integrator          armltd         -               integratorap:CM946ES
 integratorcp_cm946es         arm         arm946es    integrator          armltd         -               integratorcp:CM946ES
 ca9x4_ct_vxp                 arm         armv7       vexpress            armltd
-am335x_evm                   arm         armv7       am335x              ti             am33xx
+am335x_evm                   arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL1,CONS_INDEX=1
+am335x_evm_uart1             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL2,CONS_INDEX=2
+am335x_evm_uart2             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL3,CONS_INDEX=3
+am335x_evm_uart3             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL4,CONS_INDEX=4
+am335x_evm_uart4             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL5,CONS_INDEX=5
+am335x_evm_uart5             arm         armv7       am335x              ti             am33xx      am335x_evm:SERIAL6,CONS_INDEX=6
 highbank                     arm         armv7       highbank            -              highbank
 mx51_efikamx                 arm         armv7       mx51_efikamx        genesi         mx5		mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKAMX,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_mx.cfg
 mx51_efikasb                 arm         armv7       mx51_efikamx        genesi         mx5		mx51_efikamx:MACH_TYPE=MACH_TYPE_MX51_EFIKASB,IMX_CONFIG=board/genesi/mx51_efikamx/imximage_sb.cfg
@@ -242,6 +247,7 @@
 mx6qsabreauto                arm         armv7       mx6qsabreauto       freescale      mx6		mx6qsabreauto:IMX_CONFIG=board/freescale/mx6qsabreauto/imximage.cfg
 mx6qsabrelite                arm         armv7       mx6qsabrelite       freescale      mx6		mx6qsabrelite:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
 mx6qsabresd                  arm         armv7       mx6qsabresd         freescale      mx6		mx6qsabresd:IMX_CONFIG=board/freescale/imx/ddr/mx6q_4x_mt41j128.cfg
+eco5pk                       arm         armv7       eco5pk              8dtech         omap3
 cm_t35                       arm         armv7       cm_t35              -              omap3
 omap3_overo                  arm         armv7       overo               -              omap3
 omap3_pandora                arm         armv7       pandora             -              omap3
@@ -266,6 +272,7 @@
 mcx                          arm         armv7       mcx                 htkw           omap3
 tricorder                    arm         armv7       tricorder           corscience     omap3
 twister                      arm         armv7       twister             technexion     omap3
+nokia_rx51                   arm         armv7       rx51                nokia          omap3
 omap4_panda                  arm         armv7       panda               ti             omap4
 omap4_sdp4430                arm         armv7       sdp4430             ti             omap4
 omap5_evm                    arm         armv7       omap5_evm           ti		omap5
@@ -280,6 +287,7 @@
 seaboard                     arm         armv7:arm720t seaboard          nvidia         tegra20
 ventana                      arm         armv7:arm720t ventana           nvidia         tegra20
 whistler                     arm         armv7:arm720t whistler          nvidia         tegra20
+colibri_t20_iris             arm         armv7:arm720t colibri_t20_iris  toradex        tegra20
 u8500_href                   arm         armv7       u8500               st-ericsson    u8500
 snowball                     arm         armv7       snowball               st-ericsson    u8500
 kzm9g                        arm         armv7       kzm9g               kmc            rmobile
@@ -297,6 +305,7 @@
 pdnb3                        arm         ixp         pdnb3               prodrive
 scpu                         arm         ixp         pdnb3               prodrive       -           pdnb3:SCPU
 balloon3                     arm         pxa
+h2200                        arm         pxa
 lubbock                      arm         pxa
 palmld                       arm         pxa
 palmtc                       arm         pxa
@@ -381,6 +390,12 @@
 M5329AFEE                    m68k        mcf532x     m5329evb            freescale      -           M5329EVB:NANDFLASH_SIZE=0
 M5329BFEE                    m68k        mcf532x     m5329evb            freescale      -           M5329EVB:NANDFLASH_SIZE=16
 M5373EVB                     m68k        mcf532x     m5373evb            freescale      -           M5373EVB:NANDFLASH_SIZE=16
+M54418TWR                    m68k        mcf5445x    m54418twr           freescale      -           M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000
+M54418TWR_nand_mii           m68k        mcf5445x    m54418twr           freescale      -           M54418TWR:SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000
+M54418TWR_nand_rmii          m68k        mcf5445x    m54418twr           freescale      -           M54418TWR:SYS_NAND_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000
+M54418TWR_nand_rmii_lowfreq  m68k        mcf5445x    m54418twr           freescale      -           M54418TWR:SYS_NAND_BOOT,LOW_MCFCLK,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000
+M54418TWR_serial_mii         m68k        mcf5445x    m54418twr           freescale      -           M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=25000000
+M54418TWR_serial_rmii        m68k        mcf5445x    m54418twr           freescale      -           M54418TWR:CF_SBF,SYS_SERIAL_BOOT,SYS_TEXT_BASE=0x47E00000,SYS_INPUT_CLKSRC=50000000
 M54451EVB                    m68k        mcf5445x    m54451evb           freescale      -           M54451EVB:SYS_TEXT_BASE=0x00000000,SYS_INPUT_CLKSRC=24000000
 M54451EVB_stmicro            m68k        mcf5445x    m54451evb           freescale      -           M54451EVB:CF_SBF,SYS_STMICRO_BOOT,SYS_TEXT_BASE=0x47e00000,SYS_INPUT_CLKSRC=24000000
 M54455EVB                    m68k        mcf5445x    m54455evb           freescale      -           M54455EVB:SYS_ATMEL_BOOT,SYS_TEXT_BASE=0x04000000,SYS_INPUT_CLKSRC=33333333
@@ -406,6 +421,8 @@
 microblaze-generic           microblaze  microblaze  microblaze-generic  xilinx
 qemu_mips                    mips        mips32      qemu-mips           -              -           qemu-mips:SYS_BIG_ENDIAN
 qemu_mipsel                  mips        mips32      qemu-mips           -              -           qemu-mips:SYS_LITTLE_ENDIAN
+qemu_mips64                  mips        mips64      qemu-mips           -              -           qemu-mips64:SYS_BIG_ENDIAN
+qemu_mips64el                mips        mips64      qemu-mips           -              -           qemu-mips64:SYS_LITTLE_ENDIAN
 vct_platinum                 mips        mips32      vct                 micronas       -           vct:VCT_PLATINUM
 vct_platinumavc              mips        mips32      vct                 micronas       -           vct:VCT_PLATINUMAVC
 vct_platinumavc_onenand      mips        mips32      vct                 micronas       -           vct:VCT_PLATINUMAVC,VCT_ONENAND
@@ -546,7 +563,6 @@
 sorcery                      powerpc     mpc8220
 Yukon8220                    powerpc     mpc8220     alaska
 A3000                        powerpc     mpc824x     a3000
-BMW                          powerpc     mpc824x     bmw
 CPC45                        powerpc     mpc824x     cpc45               -              -           CPC45
 CPC45_ROMBOOT                powerpc     mpc824x     cpc45               -              -           CPC45:BOOT_ROM
 CU824                        powerpc     mpc824x     cu824
@@ -619,7 +635,6 @@
 VoVPN-GW_66MHz               powerpc     mpc8260     vovpn-gw            funkwerk       -           VoVPN-GW:CLKIN_66MHz
 mgcoge                       powerpc     mpc8260     km82xx              keymile        -           km82xx:MGCOGE
 mgcoge3ne                    powerpc     mpc8260     km82xx              keymile        -           km82xx:MGCOGE3NE
-SCM                          powerpc     mpc8260     -                   siemens
 TQM8255_AA                   powerpc     mpc8260     tqm8260             tqc            -           TQM8260:MPC8255,300MHz
 TQM8260_AA                   powerpc     mpc8260     tqm8260             tqc            -           TQM8260:MPC8260,200MHz
 TQM8260_AB                   powerpc     mpc8260     tqm8260             tqc            -           TQM8260:MPC8260,200MHz,L2_CACHE,BUSMODE_60x
@@ -679,21 +694,16 @@
 SIMPC8313_LP                 powerpc     mpc83xx     simpc8313           sheldon        -           SIMPC8313:NAND_LP
 SIMPC8313_SP                 powerpc     mpc83xx     simpc8313           sheldon        -           SIMPC8313:NAND_SP
 TQM834x                      powerpc     mpc83xx     tqm834x             tqc
-suvd3                        powerpc     mpc83xx     km83xx              keymile
+suvd3                        powerpc     mpc83xx     km83xx              keymile        -           suvd3:SUVD3
+kmvect1                      powerpc     mpc83xx     km83xx              keymile        -           suvd3:KMVECT1
 tuge1                        powerpc     mpc83xx     km83xx              keymile        -           tuxx1:KM_DISABLE_APP2,TUGE1
 tuxx1                        powerpc     mpc83xx     km83xx              keymile
 kmsupx5                      powerpc     mpc83xx     km83xx              keymile        -           tuxx1:KM_DISABLE_APP2,KMSUPX5
-sbc8540                      powerpc     mpc85xx     sbc8560             -              -           SBC8540
-sbc8540_33                   powerpc     mpc85xx     sbc8560             -              -           SBC8540
-sbc8540_66                   powerpc     mpc85xx     sbc8560             -              -           SBC8540
 sbc8548                      powerpc     mpc85xx     sbc8548             -              -           sbc8548
 sbc8548_PCI_33               powerpc     mpc85xx     sbc8548             -              -           sbc8548:PCI,33
 sbc8548_PCI_33_PCIE          powerpc     mpc85xx     sbc8548             -              -           sbc8548:PCI,33,PCIE
 sbc8548_PCI_66               powerpc     mpc85xx     sbc8548             -              -           sbc8548:PCI,66
 sbc8548_PCI_66_PCIE          powerpc     mpc85xx     sbc8548             -              -           sbc8548:PCI,66,PCIE
-sbc8560                      powerpc     mpc85xx     sbc8560             -              -           sbc8560
-sbc8560_33                   powerpc     mpc85xx     sbc8560             -              -           sbc8560
-sbc8560_66                   powerpc     mpc85xx     sbc8560             -              -           sbc8560
 socrates                     powerpc     mpc85xx     socrates
 HWW1U1A                      powerpc     mpc85xx     hww1u1a             exmeritus
 MPC8536DS                    powerpc     mpc85xx     mpc8536ds           freescale      -           MPC8536DS
@@ -844,6 +854,9 @@
 stxgp3                       powerpc     mpc85xx     stxgp3              stx
 stxssa                       powerpc     mpc85xx     stxssa              stx            -           stxssa
 stxssa_4M                    powerpc     mpc85xx     stxssa              stx            -           stxssa:STXSSA_4M
+T4240QDS                     powerpc     mpc85xx     t4qds               freescale
+T4240QDS_SDCARD              powerpc     mpc85xx     t4qds               freescale	-           T4240QDS:RAMBOOT_PBL,SDCARD,SYS_TEXT_BASE=0xFFF80000
+T4240QDS_SPIFLASH            powerpc     mpc85xx     t4qds               freescale	-           T4240QDS:RAMBOOT_PBL,SPIFLASH,SYS_TEXT_BASE=0xFFF80000
 xpedite520x                  powerpc     mpc85xx     -                   xes
 xpedite537x                  powerpc     mpc85xx     -                   xes
 xpedite550x                  powerpc     mpc85xx     -                   xes
@@ -857,11 +870,8 @@
 AdderII                      powerpc     mpc8xx      adder               -              -           Adder:MPC852T
 AdderUSB                     powerpc     mpc8xx      adder               -              -           Adder
 ADS860                       powerpc     mpc8xx      fads
-c2mon                        powerpc     mpc8xx
 cogent_mpc8xx                powerpc     mpc8xx      cogent
-EP88x                        powerpc     mpc8xx      ep88x
 ESTEEM192E                   powerpc     mpc8xx      esteem192e
-ETX094                       powerpc     mpc8xx      etx094
 FADS823                      powerpc     mpc8xx      fads
 FADS850SAR                   powerpc     mpc8xx      fads
 FADS860T                     powerpc     mpc8xx      fads
@@ -879,7 +889,6 @@
 IVMS8                        powerpc     mpc8xx      ivm                 -              -           IVMS8:IVMS8_16M
 IVMS8_128                    powerpc     mpc8xx      ivm                 -              -           IVMS8:IVMS8_32M
 IVMS8_256                    powerpc     mpc8xx      ivm                 -              -           IVMS8:IVMS8_64M
-LANTEC                       powerpc     mpc8xx      lantec
 lwmon                        powerpc     mpc8xx
 MBX                          powerpc     mpc8xx      mbx8xx
 MBX860T                      powerpc     mpc8xx      mbx8xx
@@ -926,7 +935,6 @@
 KUP4X                        powerpc     mpc8xx      kup4x               kup
 ELPT860                      powerpc     mpc8xx      elpt860             LEOX
 uc100                        powerpc     mpc8xx      -                   manroland
-IAD210                       powerpc     mpc8xx      -                   siemens
 QS823                        powerpc     mpc8xx      qs850               snmc
 QS850                        powerpc     mpc8xx      qs850               snmc
 QS860T                       powerpc     mpc8xx      qs860t              snmc
@@ -952,7 +960,6 @@
 TTTech                       powerpc     mpc8xx      tqm8xx              tqc            -           TQM823L:LCD,SHARP_LQ104V7DS01
 virtlab2                     powerpc     mpc8xx      tqm8xx              tqc
 wtk                          powerpc     mpc8xx      tqm8xx              tqc            -           TQM823L:LCD,SHARP_LQ065T9DR51U
-AMX860                       powerpc     mpc8xx      amx860              westel
 csb272                       powerpc     ppc4xx
 csb472                       powerpc     ppc4xx
 G2000                        powerpc     ppc4xx      g2000
diff --git a/common/Makefile b/common/Makefile
index fdfead7..9e43322 100644
--- a/common/Makefile
+++ b/common/Makefile
@@ -70,6 +70,7 @@
 COBJS-$(CONFIG_CMD_BOOTLDR) += cmd_bootldr.o
 COBJS-$(CONFIG_CMD_BOOTSTAGE) += cmd_bootstage.o
 COBJS-$(CONFIG_CMD_CACHE) += cmd_cache.o
+COBJS-$(CONFIG_CMD_CBFS) += cmd_cbfs.o
 COBJS-$(CONFIG_CMD_CONSOLE) += cmd_console.o
 COBJS-$(CONFIG_CMD_CPLBINFO) += cmd_cplbinfo.o
 COBJS-$(CONFIG_DATAFLASH_MMC_SELECT) += cmd_dataflash_mmc_mux.o
@@ -89,11 +90,6 @@
 COBJS-$(CONFIG_SYS_HUSH_PARSER) += cmd_exit.o
 COBJS-$(CONFIG_CMD_EXT4) += cmd_ext4.o
 COBJS-$(CONFIG_CMD_EXT2) += cmd_ext2.o
-ifdef CONFIG_CMD_EXT4
-COBJS-y	+= cmd_ext_common.o
-else
-COBJS-$(CONFIG_CMD_EXT2) += cmd_ext_common.o
-endif
 COBJS-$(CONFIG_CMD_FAT) += cmd_fat.o
 COBJS-$(CONFIG_CMD_FDC)$(CONFIG_CMD_FDOS) += cmd_fdc.o
 COBJS-$(CONFIG_OF_LIBFDT) += cmd_fdt.o fdt_support.o
@@ -103,6 +99,7 @@
 ifdef CONFIG_FPGA
 COBJS-$(CONFIG_CMD_FPGA) += cmd_fpga.o
 endif
+COBJS-$(CONFIG_CMD_FS_GENERIC) += cmd_fs.o
 COBJS-$(CONFIG_CMD_GPIO) += cmd_gpio.o
 COBJS-$(CONFIG_CMD_I2C) += cmd_i2c.o
 COBJS-$(CONFIG_CMD_IDE) += cmd_ide.o
@@ -204,6 +201,7 @@
 COBJS-$(CONFIG_SPL_NET_SUPPORT) += env_nowhere.o
 COBJS-$(CONFIG_SPL_NET_SUPPORT) += miiphyutil.o
 endif
+COBJS-$(CONFIG_BOUNCE_BUFFER) += bouncebuf.o
 COBJS-y += console.o
 COBJS-y += dlmalloc.o
 COBJS-y += image.o
diff --git a/common/bouncebuf.c b/common/bouncebuf.c
new file mode 100644
index 0000000..4f827f8
--- /dev/null
+++ b/common/bouncebuf.c
@@ -0,0 +1,92 @@
+/*
+ * Generic bounce buffer implementation
+ *
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <errno.h>
+#include <bouncebuf.h>
+
+static int addr_aligned(void *data, size_t len)
+{
+	const ulong align_mask = ARCH_DMA_MINALIGN - 1;
+
+	/* Check if start is aligned */
+	if ((ulong)data & align_mask) {
+		debug("Unaligned start address %p\n", data);
+		return 0;
+	}
+
+	data += len;
+
+	/* Check if end is aligned */
+	if ((ulong)data & align_mask) {
+		debug("Unaligned end address %p\n", data);
+		return 0;
+	}
+
+	/* Aligned */
+	return 1;
+}
+
+int bounce_buffer_start(void **data, size_t len, void **backup, uint8_t flags)
+{
+	void *tmp;
+	size_t alen;
+
+	if (addr_aligned(*data, len)) {
+		*backup = NULL;
+		return 0;
+	}
+
+	alen = roundup(len, ARCH_DMA_MINALIGN);
+	tmp = memalign(ARCH_DMA_MINALIGN, alen);
+
+	if (!tmp)
+		return -ENOMEM;
+
+	if (flags & GEN_BB_READ)
+		memcpy(tmp, *data, len);
+
+	*backup = *data;
+	*data = tmp;
+
+	return 0;
+}
+
+int bounce_buffer_stop(void **data, size_t len, void **backup, uint8_t flags)
+{
+	void *tmp = *data;
+
+	/* The buffer was already aligned, since "backup" is NULL. */
+	if (!*backup)
+		return 0;
+
+	if (flags & GEN_BB_WRITE)
+		memcpy(*backup, *data, len);
+
+	*data = *backup;
+	free(tmp);
+
+	return 0;
+}
diff --git a/common/cmd_bdinfo.c b/common/cmd_bdinfo.c
index 286c8c8..48cdd16 100644
--- a/common/cmd_bdinfo.c
+++ b/common/cmd_bdinfo.c
@@ -148,7 +148,7 @@
 	print_mhz("ethspeed",		bd->bi_ethspeed);
 #endif
 	printf("IP addr     = %s\n", getenv("ipaddr"));
-	printf("baudrate    = %6ld bps\n", bd->bi_baudrate);
+	printf("baudrate    = %6u bps\n", bd->bi_baudrate);
 	print_num("relocaddr", gd->relocaddr);
 	return 0;
 }
@@ -175,7 +175,7 @@
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
 
-	printf("baudrate    = %ld bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 
 	return 0;
 }
@@ -198,7 +198,7 @@
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate    = %ld bps\n", (ulong)bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", (ulong)bd->bi_baudrate);
 	return 0;
 }
 
@@ -231,7 +231,7 @@
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate               = %6ld bps\n", bd->bi_baudrate);
+	printf("baudrate               = %6u bps\n", bd->bi_baudrate);
 	return 0;
 }
 
@@ -277,7 +277,7 @@
 
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate    = %ld bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 
 	return 0;
 }
@@ -304,7 +304,7 @@
 
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
-	printf("baudrate    = %d bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 
 	return 0;
 }
@@ -324,7 +324,7 @@
 
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
-	printf("baudrate    = %d bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 
 	return 0;
 }
@@ -344,7 +344,7 @@
 
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
-	printf("baudrate    = %lu bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 
 	return 0;
 }
@@ -369,7 +369,7 @@
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate    = %d bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 #if !(defined(CONFIG_SYS_ICACHE_OFF) && defined(CONFIG_SYS_DCACHE_OFF))
 	print_num("TLB addr", gd->tlb_addr);
 #endif
@@ -405,7 +405,7 @@
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate    = %ld bps\n", (ulong)bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 	return 0;
 }
 
@@ -439,7 +439,7 @@
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 	print_mhz("ethspeed",	    bd->bi_ethspeed);
 #endif
-	printf("baudrate    = %d bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 
 	return 0;
 }
@@ -487,7 +487,7 @@
 	print_eth(0);
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
-	printf("baudrate    = %d bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 
 	return 0;
 }
@@ -509,7 +509,7 @@
 	printf("ip_addr     = %s\n", getenv("ipaddr"));
 #endif
 
-	printf("baudrate    = %ld bps\n", bd->bi_baudrate);
+	printf("baudrate    = %u bps\n", bd->bi_baudrate);
 
 	return 0;
 }
diff --git a/common/cmd_boot.c b/common/cmd_boot.c
index a799b33..d3836fd 100644
--- a/common/cmd_boot.c
+++ b/common/cmd_boot.c
@@ -32,12 +32,13 @@
 
 /* Allow ports to override the default behavior */
 __attribute__((weak))
-unsigned long do_go_exec (ulong (*entry)(int, char * const []), int argc, char * const argv[])
+unsigned long do_go_exec(ulong (*entry)(int, char * const []), int argc,
+				 char * const argv[])
 {
 	return entry (argc, argv);
 }
 
-int do_go (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_go(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong	addr, rc;
 	int     rcode = 0;
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 83fa5d7..d256ddf 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -161,7 +161,7 @@
 bootm_headers_t images;		/* pointers to os/initrd/fdt images */
 
 /* Allow for arch specific config before we boot */
-void __arch_preboot_os(void)
+static void __arch_preboot_os(void)
 {
 	/* please define platform specific arch_preboot_os() */
 }
@@ -474,7 +474,7 @@
 	U_BOOT_CMD_MKENT(go, 0, 1, (void *)BOOTM_STATE_OS_GO, "", ""),
 };
 
-int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
+static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
 			char * const argv[])
 {
 	int ret = 0;
@@ -1013,9 +1013,8 @@
 	return (void *)img_addr;
 }
 
-U_BOOT_CMD(
-	bootm,	CONFIG_SYS_MAXARGS,	1,	do_bootm,
-	"boot application image from memory",
+#ifdef CONFIG_SYS_LONGHELP
+static char bootm_help_text[] =
 	"[addr [arg ...]]\n    - boot application image stored in memory\n"
 	"\tpassing arguments 'arg ...'; when booting a Linux kernel,\n"
 	"\t'arg' can be the address of an initrd image\n"
@@ -1048,7 +1047,12 @@
 	"\tcmdline - OS specific command line processing/setup\n"
 	"\tbdt     - OS specific bd_t processing\n"
 	"\tprep    - OS specific prep before relocation or go\n"
-	"\tgo      - start OS"
+	"\tgo      - start OS";
+#endif
+
+U_BOOT_CMD(
+	bootm,	CONFIG_SYS_MAXARGS,	1,	do_bootm,
+	"boot application image from memory", bootm_help_text
 );
 
 /*******************************************************************/
@@ -1084,7 +1088,7 @@
 /* iminfo - print header info for a requested image */
 /*******************************************************************/
 #if defined(CONFIG_CMD_IMI)
-int do_iminfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_iminfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int	arg;
 	ulong	addr;
@@ -1171,7 +1175,7 @@
 /* imls - list all images found in flash */
 /*******************************************************************/
 #if defined(CONFIG_CMD_IMLS)
-int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_imls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	flash_info_t *info;
 	int i, j;
@@ -1643,9 +1647,8 @@
 	return 1;
 }
 
-U_BOOT_CMD(
-	bootz,	CONFIG_SYS_MAXARGS,	1,	do_bootz,
-	"boot Linux zImage image from memory",
+#ifdef CONFIG_SYS_LONGHELP
+static char bootz_help_text[] =
 	"[addr [initrd[:size]] [fdt]]\n"
 	"    - boot Linux zImage stored in memory\n"
 	"\tThe argument 'initrd' is optional and specifies the address\n"
@@ -1658,5 +1661,11 @@
 	"\tuse a '-' for the second argument. If you do not pass a third\n"
 	"\ta bd_info struct will be passed instead\n"
 #endif
+	"";
+#endif
+
+U_BOOT_CMD(
+	bootz,	CONFIG_SYS_MAXARGS,	1,	do_bootz,
+	"boot Linux zImage image from memory", bootz_help_text
 );
 #endif	/* CONFIG_CMD_BOOTZ */
diff --git a/common/cmd_cbfs.c b/common/cmd_cbfs.c
new file mode 100644
index 0000000..3b6cfd8
--- /dev/null
+++ b/common/cmd_cbfs.c
@@ -0,0 +1,214 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * CBFS commands
+ */
+#include <common.h>
+#include <command.h>
+#include <cbfs.h>
+
+int do_cbfs_init(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	uintptr_t end_of_rom = 0xffffffff;
+	char *ep;
+
+	if (argc > 2) {
+		printf("usage: cbfsls [end of rom]>\n");
+		return 0;
+	}
+	if (argc == 2) {
+		end_of_rom = (int)simple_strtoul(argv[1], &ep, 16);
+		if (*ep) {
+			puts("\n** Invalid end of ROM **\n");
+			return 1;
+		}
+	}
+	file_cbfs_init(end_of_rom);
+	if (file_cbfs_result != CBFS_SUCCESS) {
+		printf("%s.\n", file_cbfs_error());
+		return 1;
+	}
+	return 0;
+}
+
+U_BOOT_CMD(
+	cbfsinit,	2,	0,	do_cbfs_init,
+	"initialize the cbfs driver",
+	"[end of rom]\n"
+	"    - Initialize the cbfs driver. The optional 'end of rom'\n"
+	"      parameter specifies where the end of the ROM is that the\n"
+	"      CBFS is in. It defaults to 0xFFFFFFFF\n"
+);
+
+int do_cbfs_fsload(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	const struct cbfs_cachenode *file;
+	unsigned long offset;
+	unsigned long count;
+	char buf[12];
+	long size;
+
+	if (argc < 3) {
+		printf("usage: cbfsload <addr> <filename> [bytes]\n");
+		return 1;
+	}
+
+	/* parse offset and count */
+	offset = simple_strtoul(argv[1], NULL, 16);
+	if (argc == 4)
+		count = simple_strtoul(argv[3], NULL, 16);
+	else
+		count = 0;
+
+	file = file_cbfs_find(argv[2]);
+	if (!file) {
+		if (file_cbfs_result == CBFS_FILE_NOT_FOUND)
+			printf("%s: %s\n", file_cbfs_error(), argv[2]);
+		else
+			printf("%s.\n", file_cbfs_error());
+		return 1;
+	}
+
+	printf("reading %s\n", file_cbfs_name(file));
+
+	size = file_cbfs_read(file, (void *)offset, count);
+
+	printf("\n%ld bytes read\n", size);
+
+	sprintf(buf, "%lX", size);
+	setenv("filesize", buf);
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	cbfsload,	4,	0,	do_cbfs_fsload,
+	"load binary file from a cbfs filesystem",
+	"<addr> <filename> [bytes]\n"
+	"    - load binary file 'filename' from the cbfs to address 'addr'\n"
+);
+
+int do_cbfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	const struct cbfs_cachenode *file = file_cbfs_get_first();
+	int files = 0;
+
+	if (!file) {
+		printf("%s.\n", file_cbfs_error());
+		return 1;
+	}
+
+	printf("     size              type  name\n");
+	printf("------------------------------------------\n");
+	while (file) {
+		u32 type = file_cbfs_type(file);
+		char *type_name = NULL;
+		const char *filename = file_cbfs_name(file);
+
+		printf(" %8d", file_cbfs_size(file));
+
+		switch (type) {
+		case CBFS_TYPE_STAGE:
+			type_name = "stage";
+			break;
+		case CBFS_TYPE_PAYLOAD:
+			type_name = "payload";
+			break;
+		case CBFS_TYPE_OPTIONROM:
+			type_name = "option rom";
+			break;
+		case CBFS_TYPE_BOOTSPLASH:
+			type_name = "boot splash";
+			break;
+		case CBFS_TYPE_RAW:
+			type_name = "raw";
+			break;
+		case CBFS_TYPE_VSA:
+			type_name = "vsa";
+			break;
+		case CBFS_TYPE_MBI:
+			type_name = "mbi";
+			break;
+		case CBFS_TYPE_MICROCODE:
+			type_name = "microcode";
+			break;
+		case CBFS_COMPONENT_CMOS_DEFAULT:
+			type_name = "cmos default";
+			break;
+		case CBFS_COMPONENT_CMOS_LAYOUT:
+			type_name = "cmos layout";
+			break;
+		case -1UL:
+			type_name = "null";
+			break;
+		}
+		if (type_name)
+			printf("  %16s", type_name);
+		else
+			printf("  %16d", type);
+
+		if (filename[0])
+			printf("  %s\n", filename);
+		else
+			printf("  %s\n", "(empty)");
+		file_cbfs_get_next(&file);
+		files++;
+	}
+
+	printf("\n%d file(s)\n\n", files);
+	return 0;
+}
+
+U_BOOT_CMD(
+	cbfsls,	1,	1,	do_cbfs_ls,
+	"list files",
+	"    - list the files in the cbfs\n"
+);
+
+int do_cbfs_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
+{
+	const struct cbfs_header *header = file_cbfs_get_header();
+
+	if (!header) {
+		printf("%s.\n", file_cbfs_error());
+		return 1;
+	}
+
+	printf("\n");
+	printf("CBFS version: %#x\n", header->version);
+	printf("ROM size: %#x\n", header->rom_size);
+	printf("Boot block size: %#x\n", header->boot_block_size);
+	printf("CBFS size: %#x\n",
+		header->rom_size - header->boot_block_size - header->offset);
+	printf("Alignment: %d\n", header->align);
+	printf("Offset: %#x\n", header->offset);
+	printf("\n");
+
+	return 0;
+}
+
+U_BOOT_CMD(
+	cbfsinfo,	1,	1,	do_cbfs_fsinfo,
+	"print information about filesystem",
+	"    - print information about the cbfs filesystem\n"
+);
diff --git a/common/cmd_console.c b/common/cmd_console.c
index d8cad6b..e8d9f11 100644
--- a/common/cmd_console.c
+++ b/common/cmd_console.c
@@ -29,7 +29,7 @@
 #include <stdio_dev.h>
 
 extern void _do_coninfo (void);
-int do_coninfo (cmd_tbl_t * cmd, int flag, int argc, char * const argv[])
+static int do_coninfo(cmd_tbl_t *cmd, int flag, int argc, char * const argv[])
 {
 	int l;
 	struct list_head *list = stdio_get_list();
diff --git a/common/cmd_date.c b/common/cmd_date.c
index 335bc05..0ac032c 100644
--- a/common/cmd_date.c
+++ b/common/cmd_date.c
@@ -43,7 +43,7 @@
 
 int mk_date (const char *, struct rtc_time *);
 
-int do_date (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_date(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	struct rtc_time tm;
 	int rcode = 0;
diff --git a/common/cmd_echo.c b/common/cmd_echo.c
index 1e499fb..52123fe 100644
--- a/common/cmd_echo.c
+++ b/common/cmd_echo.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <command.h>
 
-int do_echo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_echo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int i;
 	int putnl = 1;
diff --git a/common/cmd_exit.c b/common/cmd_exit.c
index f3fc8f5..0f2ee40 100644
--- a/common/cmd_exit.c
+++ b/common/cmd_exit.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <command.h>
 
-int do_exit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_exit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int r;
 
diff --git a/common/cmd_ext2.c b/common/cmd_ext2.c
index c27d9c7..f25e22b 100644
--- a/common/cmd_ext2.c
+++ b/common/cmd_ext2.c
@@ -37,15 +37,11 @@
 /*
  * Ext2fs support
  */
-#include <common.h>
-#include <ext_common.h>
+#include <fs.h>
 
 int do_ext2ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	if (do_ext_ls(cmdtp, flag, argc, argv))
-		return -1;
-
-	return 0;
+	return do_ls(cmdtp, flag, argc, argv, FS_TYPE_EXT);
 }
 
 /******************************************************************************
@@ -53,10 +49,7 @@
  */
 int do_ext2load (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	if (do_ext_load(cmdtp, flag, argc, argv))
-		return -1;
-
-	return 0;
+	return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16);
 }
 
 U_BOOT_CMD(
@@ -71,5 +64,6 @@
 	"load binary file from a Ext2 filesystem",
 	"<interface> <dev[:part]> [addr] [filename] [bytes]\n"
 	"    - load binary file 'filename' from 'dev' on 'interface'\n"
-	"      to address 'addr' from ext2 filesystem"
+	"      to address 'addr' from ext2 filesystem.\n"
+	"      All numeric parameters are assumed to be hex."
 );
diff --git a/common/cmd_ext4.c b/common/cmd_ext4.c
index ca46561..dcf76a5 100644
--- a/common/cmd_ext4.c
+++ b/common/cmd_ext4.c
@@ -47,10 +47,10 @@
 #include <image.h>
 #include <linux/ctype.h>
 #include <asm/byteorder.h>
-#include <ext_common.h>
 #include <ext4fs.h>
 #include <linux/stat.h>
 #include <malloc.h>
+#include <fs.h>
 
 #if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
 #include <usb.h>
@@ -59,18 +59,12 @@
 int do_ext4_load(cmd_tbl_t *cmdtp, int flag, int argc,
 						char *const argv[])
 {
-	if (do_ext_load(cmdtp, flag, argc, argv))
-		return -1;
-
-	return 0;
+	return do_load(cmdtp, flag, argc, argv, FS_TYPE_EXT, 16);
 }
 
 int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
 {
-	if (do_ext_ls(cmdtp, flag, argc, argv))
-		return -1;
-
-	return 0;
+	return do_ls(cmdtp, flag, argc, argv, FS_TYPE_EXT);
 }
 
 #if defined(CONFIG_CMD_EXT4_WRITE)
@@ -107,7 +101,7 @@
 
 	/* mount the filesystem */
 	if (!ext4fs_mount(info.size)) {
-		printf("Bad ext4 partition %s %d:%lu\n", argv[1], dev, part);
+		printf("Bad ext4 partition %s %d:%d\n", argv[1], dev, part);
 		goto fail;
 	}
 
@@ -129,17 +123,18 @@
 U_BOOT_CMD(ext4write, 6, 1, do_ext4_write,
 	"create a file in the root directory",
 	"<interface> <dev[:part]> [Absolute filename path] [Address] [sizebytes]\n"
-	"	  - create a file in / directory");
+	"    - create a file in / directory");
 
 #endif
 
 U_BOOT_CMD(ext4ls, 4, 1, do_ext4_ls,
 	   "list files in a directory (default /)",
 	   "<interface> <dev[:part]> [directory]\n"
-	   "	  - list files from 'dev' on 'interface' in a 'directory'");
+	   "    - list files from 'dev' on 'interface' in a 'directory'");
 
 U_BOOT_CMD(ext4load, 6, 0, do_ext4_load,
 	   "load binary file from a Ext4 filesystem",
 	   "<interface> <dev[:part]> [addr] [filename] [bytes]\n"
-	   "	  - load binary file 'filename' from 'dev' on 'interface'\n"
-	   "		 to address 'addr' from ext4 filesystem");
+	   "    - load binary file 'filename' from 'dev' on 'interface'\n"
+	   "      to address 'addr' from ext4 filesystem.\n"
+	   "      All numeric parameters are assumed to be hex.");
diff --git a/common/cmd_ext_common.c b/common/cmd_ext_common.c
deleted file mode 100644
index 1952f4d..0000000
--- a/common/cmd_ext_common.c
+++ /dev/null
@@ -1,197 +0,0 @@
-/*
- * (C) Copyright 2011 - 2012 Samsung Electronics
- * EXT2/4 filesystem implementation in Uboot by
- * Uma Shankar <uma.shankar@samsung.com>
- * Manjunatha C Achar <a.manjunatha@samsung.com>
- *
- * Ext4fs support
- * made from existing cmd_ext2.c file of Uboot
- *
- * (C) Copyright 2004
- * esd gmbh <www.esd-electronics.com>
- * Reinhard Arlt <reinhard.arlt@esd-electronics.com>
- *
- * made from cmd_reiserfs by
- *
- * (C) Copyright 2003 - 2004
- * Sysgo Real-Time Solutions, AG <www.elinos.com>
- * Pavel Bartusek <pba@sysgo.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-/*
- * Changelog:
- *	0.1 - Newly created file for ext4fs support. Taken from cmd_ext2.c
- *	        file in uboot. Added ext4fs ls load and write support.
- */
-
-#include <common.h>
-#include <part.h>
-#include <config.h>
-#include <command.h>
-#include <image.h>
-#include <linux/ctype.h>
-#include <asm/byteorder.h>
-#include <ext_common.h>
-#include <ext4fs.h>
-#include <linux/stat.h>
-#include <malloc.h>
-
-#if defined(CONFIG_CMD_USB) && defined(CONFIG_USB_STORAGE)
-#include <usb.h>
-#endif
-
-#if !defined(CONFIG_DOS_PARTITION) && !defined(CONFIG_EFI_PARTITION)
-#error DOS or EFI partition support must be selected
-#endif
-
-#define DOS_PART_MAGIC_OFFSET		0x1fe
-#define DOS_FS_TYPE_OFFSET		0x36
-#define DOS_FS32_TYPE_OFFSET		0x52
-
-int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc,
-						char *const argv[])
-{
-	char *filename = NULL;
-	int dev, part;
-	ulong addr = 0;
-	int filelen;
-	disk_partition_t info;
-	block_dev_desc_t *dev_desc;
-	char buf[12];
-	unsigned long count;
-	const char *addr_str;
-
-	count = 0;
-	addr = simple_strtoul(argv[3], NULL, 16);
-	filename = getenv("bootfile");
-	switch (argc) {
-	case 3:
-		addr_str = getenv("loadaddr");
-		if (addr_str != NULL)
-			addr = simple_strtoul(addr_str, NULL, 16);
-		else
-			addr = CONFIG_SYS_LOAD_ADDR;
-
-		break;
-	case 4:
-		break;
-	case 5:
-		filename = argv[4];
-		break;
-	case 6:
-		filename = argv[4];
-		count = simple_strtoul(argv[5], NULL, 16);
-		break;
-
-	default:
-		return cmd_usage(cmdtp);
-	}
-
-	if (!filename) {
-		puts("** No boot file defined **\n");
-		return 1;
-	}
-
-	part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
-	if (part < 0)
-		return 1;
-
-	dev = dev_desc->dev;
-	printf("Loading file \"%s\" from %s device %d%c%c\n",
-		filename, argv[1], dev,
-		part ? ':' : ' ', part ? part + '0' : ' ');
-
-	ext4fs_set_blk_dev(dev_desc, &info);
-
-	if (!ext4fs_mount(info.size)) {
-		printf("** Bad ext2 partition or disk - %s %d:%d **\n",
-		       argv[1], dev, part);
-		ext4fs_close();
-		goto fail;
-	}
-
-	filelen = ext4fs_open(filename);
-	if (filelen < 0) {
-		printf("** File not found %s\n", filename);
-		ext4fs_close();
-		goto fail;
-	}
-	if ((count < filelen) && (count != 0))
-		filelen = count;
-
-	if (ext4fs_read((char *)addr, filelen) != filelen) {
-		printf("** Unable to read \"%s\" from %s %d:%d **\n",
-		       filename, argv[1], dev, part);
-		ext4fs_close();
-		goto fail;
-	}
-
-	ext4fs_close();
-	/* Loading ok, update default load address */
-	load_addr = addr;
-
-	printf("%d bytes read\n", filelen);
-	sprintf(buf, "%X", filelen);
-	setenv("filesize", buf);
-
-	return 0;
-fail:
-	return 1;
-}
-
-int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
-{
-	const char *filename = "/";
-	int dev;
-	int part;
-	block_dev_desc_t *dev_desc;
-	disk_partition_t info;
-
-	if (argc < 2)
-		return cmd_usage(cmdtp);
-
-	part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
-	if (part < 0)
-		return 1;
-
-	if (argc == 4)
-		filename = argv[3];
-
-	dev = dev_desc->dev;
-	ext4fs_set_blk_dev(dev_desc, &info);
-
-	if (!ext4fs_mount(info.size)) {
-		printf("** Bad ext2 partition or disk - %s %d:%d **\n",
-		       argv[1], dev, part);
-		ext4fs_close();
-		goto fail;
-	}
-
-	if (ext4fs_ls(filename)) {
-		printf("** Error extfs_ls() **\n");
-		ext4fs_close();
-		goto fail;
-	};
-
-	ext4fs_close();
-	return 0;
-
-fail:
-	return 1;
-}
diff --git a/common/cmd_fat.c b/common/cmd_fat.c
index 5a5698b..86be044 100644
--- a/common/cmd_fat.c
+++ b/common/cmd_fat.c
@@ -31,54 +31,11 @@
 #include <ata.h>
 #include <part.h>
 #include <fat.h>
-
+#include <fs.h>
 
 int do_fat_fsload (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	long size;
-	unsigned long offset;
-	unsigned long count = 0;
-	unsigned long pos = 0;
-	char buf [12];
-	block_dev_desc_t *dev_desc=NULL;
-	disk_partition_t info;
-	int part, dev;
-
-	if (argc < 5) {
-		printf("usage: fatload <interface> [<dev[:part]>] "
-			"<addr> <filename> [bytes [pos]]\n");
-		return 1;
-	}
-
-	part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
-	if (part < 0)
-		return 1;
-
-	dev = dev_desc->dev;
-	if (fat_register_device(dev_desc,part)!=0) {
-		printf("\n** Unable to use %s %d:%d for fatload **\n",
-			argv[1], dev, part);
-		return 1;
-	}
-	offset = simple_strtoul(argv[3], NULL, 16);
-	if (argc >= 6)
-		count = simple_strtoul(argv[5], NULL, 16);
-	if (argc >= 7)
-		pos = simple_strtoul(argv[6], NULL, 16);
-	size = file_fat_read_at(argv[4], pos, (unsigned char *)offset, count);
-
-	if(size==-1) {
-		printf("\n** Unable to read \"%s\" from %s %d:%d **\n",
-			argv[4], argv[1], dev, part);
-		return 1;
-	}
-
-	printf("\n%ld bytes read\n", size);
-
-	sprintf(buf, "%lX", size);
-	setenv("filesize", buf);
-
-	return 0;
+	return do_load(cmdtp, flag, argc, argv, FS_TYPE_FAT, 16);
 }
 
 
@@ -91,39 +48,13 @@
 	"      'pos' gives the file position to start loading from.\n"
 	"      If 'pos' is omitted, 0 is used. 'pos' requires 'bytes'.\n"
 	"      'bytes' gives the size to load. If 'bytes' is 0 or omitted,\n"
-	"      the load stops on end of file."
+	"      the load stops on end of file.\n"
+	"      All numeric parameters are assumed to be hex."
 );
 
-int do_fat_ls (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_fat_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	char *filename = "/";
-	int ret, dev, part;
-	block_dev_desc_t *dev_desc=NULL;
-	disk_partition_t info;
-
-	if (argc < 2) {
-		printf("usage: fatls <interface> [<dev[:part]>] [directory]\n");
-		return 0;
-	}
-
-	part = get_device_and_partition(argv[1], argv[2], &dev_desc, &info, 1);
-	if (part < 0)
-		return 1;
-
-	dev = dev_desc->dev;
-	if (fat_register_device(dev_desc,part)!=0) {
-		printf("\n** Unable to use %s %d:%d for fatls **\n",
-			argv[1], dev, part);
-		return 1;
-	}
-	if (argc == 4)
-		ret = file_fat_ls(argv[3]);
-	else
-		ret = file_fat_ls(filename);
-
-	if(ret!=0)
-		printf("No Fat FS detected\n");
-	return ret;
+	return do_ls(cmdtp, flag, argc, argv, FS_TYPE_FAT);
 }
 
 U_BOOT_CMD(
@@ -133,7 +64,8 @@
 	"    - list files from 'dev' on 'interface' in a 'directory'"
 );
 
-int do_fat_fsinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_fat_fsinfo(cmd_tbl_t *cmdtp, int flag, int argc,
+			 char * const argv[])
 {
 	int dev, part;
 	block_dev_desc_t *dev_desc;
@@ -149,7 +81,7 @@
 		return 1;
 
 	dev = dev_desc->dev;
-	if (fat_register_device(dev_desc,part)!=0) {
+	if (fat_set_blk_dev(dev_desc, &info) != 0) {
 		printf("\n** Unable to use %s %d:%d for fatinfo **\n",
 			argv[1], dev, part);
 		return 1;
@@ -185,7 +117,7 @@
 
 	dev = dev_desc->dev;
 
-	if (fat_register_device(dev_desc, part) != 0) {
+	if (fat_set_blk_dev(dev_desc, &info) != 0) {
 		printf("\n** Unable to use %s %d:%d for fatwrite **\n",
 			argv[1], dev, part);
 		return 1;
diff --git a/common/cmd_fdt.c b/common/cmd_fdt.c
index e2225c4..9e2de34 100644
--- a/common/cmd_fdt.c
+++ b/common/cmd_fdt.c
@@ -35,6 +35,9 @@
 
 #define MAX_LEVEL	32		/* how deeply nested we will go */
 #define SCRATCHPAD	1024		/* bytes of scratchpad memory */
+#ifndef CONFIG_CMD_FDT_MAX_DUMP
+#define CONFIG_CMD_FDT_MAX_DUMP 64
+#endif
 
 /*
  * Global data (for the gd->bd)
@@ -44,6 +47,7 @@
 static int fdt_valid(void);
 static int fdt_parse_prop(char *const*newval, int count, char *data, int *len);
 static int fdt_print(const char *pathp, char *prop, int depth);
+static int is_printable_string(const void *data, int len);
 
 /*
  * The working_fdt points to our working flattened device tree.
@@ -61,9 +65,37 @@
 }
 
 /*
+ * Get a value from the fdt and format it to be set in the environment
+ */
+static int fdt_value_setenv(const void *nodep, int len, const char *var)
+{
+	if (is_printable_string(nodep, len))
+		setenv(var, (void *)nodep);
+	else if (len == 4) {
+		char buf[11];
+
+		sprintf(buf, "0x%08X", *(uint32_t *)nodep);
+		setenv(var, buf);
+	} else if (len%4 == 0 && len <= 20) {
+		/* Needed to print things like sha1 hashes. */
+		char buf[41];
+		int i;
+
+		for (i = 0; i < len; i += sizeof(unsigned int))
+			sprintf(buf + (i * 2), "%08x",
+				*(unsigned int *)(nodep + i));
+		setenv(var, buf);
+	} else {
+		printf("error: unprintable value\n");
+		return 1;
+	}
+	return 0;
+}
+
+/*
  * Flattened Device Tree command, see the help for parameter definitions.
  */
-int do_fdt (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_fdt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	if (argc < 2)
 		return CMD_RET_USAGE;
@@ -250,6 +282,117 @@
 			return 1;
 		}
 
+	/********************************************************************
+	 * Get the value of a property in the working_fdt.
+	 ********************************************************************/
+	} else if (argv[1][0] == 'g') {
+		char *subcmd;		/* sub-command */
+		char *pathp;		/* path */
+		char *prop;		/* property */
+		char *var;		/* variable to store result */
+		int  nodeoffset;	/* node offset from libfdt */
+		const void *nodep;	/* property node pointer */
+		int  len = 0;		/* new length of the property */
+
+		/*
+		 * Parameters: Node path, property, optional value.
+		 */
+		if (argc < 5)
+			return CMD_RET_USAGE;
+
+		subcmd = argv[2];
+
+		if (argc < 6 && subcmd[0] != 's')
+			return CMD_RET_USAGE;
+
+		var    = argv[3];
+		pathp  = argv[4];
+		prop   = argv[5];
+
+		nodeoffset = fdt_path_offset(working_fdt, pathp);
+		if (nodeoffset < 0) {
+			/*
+			 * Not found or something else bad happened.
+			 */
+			printf("libfdt fdt_path_offset() returned %s\n",
+				fdt_strerror(nodeoffset));
+			return 1;
+		}
+
+		if (subcmd[0] == 'n' || (subcmd[0] == 's' && argc == 5)) {
+			int reqIndex = -1;
+			int startDepth = fdt_node_depth(
+				working_fdt, nodeoffset);
+			int curDepth = startDepth;
+			int curIndex = -1;
+			int nextNodeOffset = fdt_next_node(
+				working_fdt, nodeoffset, &curDepth);
+
+			if (subcmd[0] == 'n')
+				reqIndex = simple_strtoul(argv[5], NULL, 16);
+
+			while (curDepth > startDepth) {
+				if (curDepth == startDepth + 1)
+					curIndex++;
+				if (subcmd[0] == 'n' && curIndex == reqIndex) {
+					const char *nodeName = fdt_get_name(
+					    working_fdt, nextNodeOffset, NULL);
+
+					setenv(var, (char *)nodeName);
+					return 0;
+				}
+				nextNodeOffset = fdt_next_node(
+					working_fdt, nextNodeOffset, &curDepth);
+				if (nextNodeOffset < 0)
+					break;
+			}
+			if (subcmd[0] == 's') {
+				/* get the num nodes at this level */
+				char buf[11];
+
+				sprintf(buf, "%d", curIndex + 1);
+				setenv(var, buf);
+			} else {
+				/* node index not found */
+				printf("libfdt node not found\n");
+				return 1;
+			}
+		} else {
+			nodep = fdt_getprop(
+				working_fdt, nodeoffset, prop, &len);
+			if (len == 0) {
+				/* no property value */
+				setenv(var, "");
+				return 0;
+			} else if (len > 0) {
+				if (subcmd[0] == 'v') {
+					int ret;
+
+					ret = fdt_value_setenv(nodep, len, var);
+					if (ret != 0)
+						return ret;
+				} else if (subcmd[0] == 'a') {
+					/* Get address */
+					char buf[11];
+
+					sprintf(buf, "0x%p", nodep);
+					setenv(var, buf);
+				} else if (subcmd[0] == 's') {
+					/* Get size */
+					char buf[11];
+
+					sprintf(buf, "0x%08X", len);
+					setenv(var, buf);
+				} else
+					return CMD_RET_USAGE;
+				return 0;
+			} else {
+				printf("libfdt fdt_getprop(): %s\n",
+					fdt_strerror(len));
+				return 1;
+			}
+		}
+
 	/*
 	 * Print (recursive) / List (single level)
 	 */
@@ -539,7 +682,7 @@
 
 			cp = newp;
 			tmp = simple_strtoul(cp, &newp, 0);
-			*(uint32_t *)data = __cpu_to_be32(tmp);
+			*(__be32 *)data = __cpu_to_be32(tmp);
 			data  += 4;
 			*len += 4;
 
@@ -611,12 +754,12 @@
 	if (len == 0)
 		return 0;
 
-	/* must terminate with zero */
-	if (s[len - 1] != '\0')
+	/* must terminate with zero or '\n' */
+	if (s[len - 1] != '\0' && s[len - 1] != '\n')
 		return 0;
 
 	/* printable or a null byte (concatenated strings) */
-	while (((*s == '\0') || isprint(*s)) && (len > 0)) {
+	while (((*s == '\0') || isprint(*s) || isspace(*s)) && (len > 0)) {
 		/*
 		 * If we see a null, there are three possibilities:
 		 * 1) If len == 1, it is the end of the string, printable
@@ -672,19 +815,28 @@
 	}
 
 	if ((len %4) == 0) {
-		const u32 *p;
+		if (len > CONFIG_CMD_FDT_MAX_DUMP)
+			printf("* 0x%p [0x%08x]", data, len);
+		else {
+			const __be32 *p;
 
-		printf("<");
-		for (j = 0, p = data; j < len/4; j ++)
-			printf("0x%x%s", fdt32_to_cpu(p[j]), j < (len/4 - 1) ? " " : "");
-		printf(">");
+			printf("<");
+			for (j = 0, p = data; j < len/4; j++)
+				printf("0x%08x%s", fdt32_to_cpu(p[j]),
+					j < (len/4 - 1) ? " " : "");
+			printf(">");
+		}
 	} else { /* anything else... hexdump */
-		const u8 *s;
+		if (len > CONFIG_CMD_FDT_MAX_DUMP)
+			printf("* 0x%p [0x%08x]", data, len);
+		else {
+			const u8 *s;
 
-		printf("[");
-		for (j = 0, s = data; j < len; j++)
-			printf("%02x%s", s[j], j < len - 1 ? " " : "");
-		printf("]");
+			printf("[");
+			for (j = 0, s = data; j < len; j++)
+				printf("%02x%s", s[j], j < len - 1 ? " " : "");
+			printf("]");
+		}
 	}
 }
 
@@ -812,11 +964,9 @@
 }
 
 /********************************************************************/
-
-U_BOOT_CMD(
-	fdt,	255,	0,	do_fdt,
-	"flattened device tree utility commands",
-	    "addr   <addr> [<length>]        - Set the fdt location to <addr>\n"
+#ifdef CONFIG_SYS_LONGHELP
+static char fdt_help_text[] =
+	"addr   <addr> [<length>]        - Set the fdt location to <addr>\n"
 #ifdef CONFIG_OF_BOARD_SETUP
 	"fdt boardsetup                      - Do board-specific set up\n"
 #endif
@@ -824,6 +974,10 @@
 	"fdt resize                          - Resize fdt to size + padding to 4k addr\n"
 	"fdt print  <path> [<prop>]          - Recursive print starting at <path>\n"
 	"fdt list   <path> [<prop>]          - Print one level starting at <path>\n"
+	"fdt get value <var> <path> <prop>   - Get <property> and store in <var>\n"
+	"fdt get name <var> <path> <index>   - Get name of node <index> and store in <var>\n"
+	"fdt get addr <var> <path> <prop>    - Get start address of <property> and store in <var>\n"
+	"fdt get size <var> <path> [<prop>]  - Get size of [<property>] or num nodes and store in <var>\n"
 	"fdt set    <path> <prop> [<val>]    - Set <property> [to <val>]\n"
 	"fdt mknode <path> <node>            - Create a new node after <path>\n"
 	"fdt rm     <path> [<prop>]          - Delete the node or <property>\n"
@@ -836,5 +990,10 @@
 	"fdt chosen [<start> <end>]          - Add/update the /chosen branch in the tree\n"
 	"                                        <start>/<end> - initrd start/end addr\n"
 	"NOTE: Dereference aliases by omiting the leading '/', "
-		"e.g. fdt print ethernet0."
+		"e.g. fdt print ethernet0.";
+#endif
+
+U_BOOT_CMD(
+	fdt,	255,	0,	do_fdt,
+	"flattened device tree utility commands", fdt_help_text
 );
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index e55d366..687eb68 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -289,7 +289,7 @@
 }
 #endif /* CONFIG_SYS_NO_FLASH */
 
-int do_flinfo ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_flinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 #ifndef CONFIG_SYS_NO_FLASH
 	ulong bank;
@@ -321,7 +321,7 @@
 	return 0;
 }
 
-int do_flerase (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_flerase(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 #ifndef CONFIG_SYS_NO_FLASH
 	flash_info_t *info = NULL;
@@ -454,7 +454,7 @@
 }
 #endif /* CONFIG_SYS_NO_FLASH */
 
-int do_protect (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_protect(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int rcode = 0;
 #ifndef CONFIG_SYS_NO_FLASH
diff --git a/common/cmd_fs.c b/common/cmd_fs.c
new file mode 100644
index 0000000..a681d03
--- /dev/null
+++ b/common/cmd_fs.c
@@ -0,0 +1,53 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Inspired by cmd_ext_common.c, cmd_fat.c.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <fs.h>
+
+int do_load_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	return do_load(cmdtp, flag, argc, argv, FS_TYPE_ANY, 0);
+}
+
+U_BOOT_CMD(
+	load,	7,	0,	do_load_wrapper,
+	"load binary file from a filesystem",
+	"<interface> [<dev[:part]> [<addr> [<filename> [bytes [pos]]]]]\n"
+	"    - Load binary file 'filename' from partition 'part' on device\n"
+	"       type 'interface' instance 'dev' to address 'addr' in memory.\n"
+	"      'bytes' gives the size to load in bytes.\n"
+	"      If 'bytes' is 0 or omitted, the file is read until the end.\n"
+	"      'pos' gives the file byte position to start reading from.\n"
+	"      If 'pos' is 0 or omitted, the file is read from the start.\n"
+	"      All numeric parameters are assumed to be decimal,\n"
+	"      unless specified otherwise using a leading \"0x\"."
+);
+
+int do_ls_wrapper(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	return do_ls(cmdtp, flag, argc, argv, FS_TYPE_ANY);
+}
+
+U_BOOT_CMD(
+	ls,	4,	1,	do_ls_wrapper,
+	"list files in a directory (default /)",
+	"<interface> [<dev[:part]> [directory]]\n"
+	"    - List files in directory 'directory' of partition 'part' on\n"
+	"      device type 'interface' instance 'dev'."
+);
diff --git a/common/cmd_help.c b/common/cmd_help.c
index 8c8178e..f832a96 100644
--- a/common/cmd_help.c
+++ b/common/cmd_help.c
@@ -24,11 +24,11 @@
 #include <common.h>
 #include <command.h>
 
-int do_help(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_help(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	return _do_help(&__u_boot_cmd_start,
-			&__u_boot_cmd_end - &__u_boot_cmd_start,
-			cmdtp, flag, argc, argv);
+	cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd);
+	const int len = ll_entry_count(cmd_tbl_t, cmd);
+	return _do_help(start, len, cmdtp, flag, argc, argv);
 }
 
 U_BOOT_CMD(
@@ -41,7 +41,7 @@
 );
 
 /* This does not use the U_BOOT_CMD macro as ? can't be used in symbol names */
-cmd_tbl_t __u_boot_cmd_question_mark Struct_Section = {
+ll_entry_declare(cmd_tbl_t, question_mark, cmd, cmd) = {
 	"?",	CONFIG_SYS_MAXARGS,	1,	do_help,
 	"alias for 'help'",
 #ifdef  CONFIG_SYS_LONGHELP
diff --git a/common/cmd_i2c.c b/common/cmd_i2c.c
index 795814d..4438db5 100644
--- a/common/cmd_i2c.c
+++ b/common/cmd_i2c.c
@@ -133,7 +133,7 @@
 #define DISP_LINE_LEN	16
 
 /* implement possible board specific board init */
-void __def_i2c_init_board(void)
+static void __def_i2c_init_board(void)
 {
 	return;
 }
@@ -141,14 +141,14 @@
 	__attribute__((weak, alias("__def_i2c_init_board")));
 
 /* TODO: Implement architecture-specific get/set functions */
-unsigned int __def_i2c_get_bus_speed(void)
+static unsigned int __def_i2c_get_bus_speed(void)
 {
 	return CONFIG_SYS_I2C_SPEED;
 }
 unsigned int i2c_get_bus_speed(void)
 	__attribute__((weak, alias("__def_i2c_get_bus_speed")));
 
-int __def_i2c_set_bus_speed(unsigned int speed)
+static int __def_i2c_set_bus_speed(unsigned int speed)
 {
 	if (speed != CONFIG_SYS_I2C_SPEED)
 		return -1;
@@ -223,6 +223,54 @@
 	return 0;
 }
 
+static int do_i2c_write(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	u_char	chip;
+	uint	devaddr, alen, length;
+	u_char  *memaddr;
+
+	if (argc != 5)
+		return cmd_usage(cmdtp);
+
+	/*
+	 * memaddr is the address where to store things in memory
+	 */
+	memaddr = (u_char *)simple_strtoul(argv[1], NULL, 16);
+
+	/*
+	 * I2C chip address
+	 */
+	chip = simple_strtoul(argv[2], NULL, 16);
+
+	/*
+	 * I2C data address within the chip.  This can be 1 or
+	 * 2 bytes long.  Some day it might be 3 bytes long :-).
+	 */
+	devaddr = simple_strtoul(argv[3], NULL, 16);
+	alen = get_alen(argv[3]);
+	if (alen > 3)
+		return cmd_usage(cmdtp);
+
+	/*
+	 * Length is the number of objects, not number of bytes.
+	 */
+	length = simple_strtoul(argv[4], NULL, 16);
+
+	while (length-- > 0) {
+		if (i2c_write(chip, devaddr++, alen, memaddr++, 1) != 0) {
+			puts("Error writing to the chip.\n");
+			return 1;
+		}
+/*
+ * No write delay with FRAM devices.
+ */
+#if !defined(CONFIG_SYS_I2C_FRAM)
+		udelay(11000);
+#endif
+	}
+	return 0;
+}
+
 /*
  * Syntax:
  *	i2c md {i2c_chip} {addr}{.0, .1, .2} {len}
@@ -557,18 +605,28 @@
 
 /*
  * Syntax:
- *	i2c probe {addr}{.0, .1, .2}
+ *	i2c probe {addr}
+ *
+ * Returns zero (success) if one or more I2C devices was found
  */
 static int do_i2c_probe (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int j;
+	int addr = -1;
+	int found = 0;
 #if defined(CONFIG_SYS_I2C_NOPROBES)
 	int k, skip;
 	uchar bus = GET_BUS_NUM;
 #endif	/* NOPROBES */
 
+	if (argc == 2)
+		addr = simple_strtol(argv[1], 0, 16);
+
 	puts ("Valid chip addresses:");
 	for (j = 0; j < 128; j++) {
+		if ((0 <= addr) && (j != addr))
+			continue;
+
 #if defined(CONFIG_SYS_I2C_NOPROBES)
 		skip = 0;
 		for (k=0; k < NUM_ELEMENTS_NOPROBE; k++) {
@@ -580,8 +638,10 @@
 		if (skip)
 			continue;
 #endif
-		if (i2c_probe(j) == 0)
+		if (i2c_probe(j) == 0) {
 			printf(" %02X", j);
+			found++;
+		}
 	}
 	putc ('\n');
 
@@ -594,7 +654,7 @@
 	putc ('\n');
 #endif
 
-	return 0;
+	return (0 == found);
 }
 
 /*
@@ -1282,6 +1342,7 @@
 	U_BOOT_CMD_MKENT(nm, 2, 1, do_i2c_nm, "", ""),
 	U_BOOT_CMD_MKENT(probe, 0, 1, do_i2c_probe, "", ""),
 	U_BOOT_CMD_MKENT(read, 5, 1, do_i2c_read, "", ""),
+	U_BOOT_CMD_MKENT(write, 5, 0, do_i2c_write, "", ""),
 	U_BOOT_CMD_MKENT(reset, 0, 1, do_i2c_reset, "", ""),
 #if defined(CONFIG_CMD_SDRAM)
 	U_BOOT_CMD_MKENT(sdram, 1, 1, do_sdram, "", ""),
@@ -1315,10 +1376,8 @@
 }
 
 /***************************************************/
-
-U_BOOT_CMD(
-	i2c, 6, 1, do_i2c,
-	"I2C sub-system",
+#ifdef CONFIG_SYS_LONGHELP
+static char i2c_help_text[] =
 #if defined(CONFIG_I2C_MUX)
 	"bus [muxtype:muxaddr:muxchannel] - add a new bus reached over muxes\ni2c "
 #endif  /* CONFIG_I2C_MUX */
@@ -1331,13 +1390,20 @@
 	"i2c mm chip address[.0, .1, .2] - write to I2C device (auto-incrementing)\n"
 	"i2c mw chip address[.0, .1, .2] value [count] - write to I2C device (fill)\n"
 	"i2c nm chip address[.0, .1, .2] - write to I2C device (constant address)\n"
-	"i2c probe - show devices on the I2C bus\n"
+	"i2c probe [address] - test for and show device(s) on the I2C bus\n"
 	"i2c read chip address[.0, .1, .2] length memaddress - read to memory \n"
+	"i2c write memaddress chip address[.0, .1, .2] length - write memory to i2c\n"
 	"i2c reset - re-init the I2C Controller\n"
 #if defined(CONFIG_CMD_SDRAM)
 	"i2c sdram chip - print SDRAM configuration information\n"
 #endif
-	"i2c speed [speed] - show or set I2C bus speed"
+	"i2c speed [speed] - show or set I2C bus speed";
+#endif
+
+U_BOOT_CMD(
+	i2c, 6, 1, do_i2c,
+	"I2C sub-system",
+	i2c_help_text
 );
 
 #if defined(CONFIG_I2C_MUX)
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index bae7767..0105bdb 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -38,14 +38,6 @@
 # include <pcmcia.h>
 #endif
 
-#ifdef CONFIG_8xx
-# include <mpc8xx.h>
-#endif
-
-#ifdef CONFIG_MPC5xxx
-#include <mpc5xxx.h>
-#endif
-
 #include <ide.h>
 #include <ata.h>
 
@@ -53,10 +45,6 @@
 # include <status_led.h>
 #endif
 
-#ifdef CONFIG_IDE_8xx_DIRECT
-DECLARE_GLOBAL_DATA_PTR;
-#endif
-
 #ifdef __PPC__
 # define EIEIO		__asm__ volatile ("eieio")
 # define SYNC		__asm__ volatile ("sync")
@@ -65,45 +53,6 @@
 # define SYNC		/* nothing */
 #endif
 
-#ifdef CONFIG_IDE_8xx_DIRECT
-/* Timings for IDE Interface
- *
- * SETUP / LENGTH / HOLD - cycles valid for 50 MHz clk
- * 70	   165	    30	   PIO-Mode 0, [ns]
- *  4	     9	     2		       [Cycles]
- * 50	   125	    20	   PIO-Mode 1, [ns]
- *  3	     7	     2		       [Cycles]
- * 30	   100	    15	   PIO-Mode 2, [ns]
- *  2	     6	     1		       [Cycles]
- * 30	    80	    10	   PIO-Mode 3, [ns]
- *  2	     5	     1		       [Cycles]
- * 25	    70	    10	   PIO-Mode 4, [ns]
- *  2	     4	     1		       [Cycles]
- */
-
-const static pio_config_t pio_config_ns [IDE_MAX_PIO_MODE+1] =
-{
-    /*	Setup  Length  Hold  */
-	{ 70,	165,	30 },		/* PIO-Mode 0, [ns]	*/
-	{ 50,	125,	20 },		/* PIO-Mode 1, [ns]	*/
-	{ 30,	101,	15 },		/* PIO-Mode 2, [ns]	*/
-	{ 30,	 80,	10 },		/* PIO-Mode 3, [ns]	*/
-	{ 25,	 70,	10 },		/* PIO-Mode 4, [ns]	*/
-};
-
-static pio_config_t pio_config_clk [IDE_MAX_PIO_MODE+1];
-
-#ifndef	CONFIG_SYS_PIO_MODE
-#define	CONFIG_SYS_PIO_MODE	0		/* use a relaxed default */
-#endif
-static int pio_mode = CONFIG_SYS_PIO_MODE;
-
-/* Make clock cycles and always round up */
-
-#define PCMCIA_MK_CLKS( t, T ) (( (t) * (T) + 999U ) / 1000U )
-
-#endif /* CONFIG_IDE_8xx_DIRECT */
-
 /* ------------------------------------------------------------------------- */
 
 /* Current I/O Device	*/
@@ -124,19 +73,6 @@
 block_dev_desc_t ide_dev_desc[CONFIG_SYS_IDE_MAXDEVICE];
 /* ------------------------------------------------------------------------- */
 
-#ifdef CONFIG_IDE_LED
-# if !defined(CONFIG_BMS2003)	&& \
-     !defined(CONFIG_CPC45)	&& \
-     !defined(CONFIG_KUP4K) && \
-     !defined(CONFIG_KUP4X)
-static void  ide_led   (uchar led, uchar status);
-#else
-extern void  ide_led   (uchar led, uchar status);
-#endif
-#else
-#define ide_led(a,b)	/* dummy */
-#endif
-
 #ifdef CONFIG_IDE_RESET
 static void  ide_reset (void);
 #else
@@ -152,8 +88,6 @@
 
 #define IDE_SPIN_UP_TIME_OUT 5000 /* 5 sec spin-up timeout */
 
-static void input_data(int dev, ulong *sect_buf, int words);
-static void output_data(int dev, const ulong *sect_buf, int words);
 static void ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
 
 #ifndef CONFIG_SYS_ATA_PORT_ADDR
@@ -162,14 +96,11 @@
 
 #ifdef CONFIG_ATAPI
 static void	atapi_inquiry(block_dev_desc_t *dev_desc);
-ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer);
+static ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt,
+			void *buffer);
 #endif
 
 
-#ifdef CONFIG_IDE_8xx_DIRECT
-static void set_pcmcia_timing (int pmode);
-#endif
-
 /* ------------------------------------------------------------------------- */
 
 int do_ide(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[])
@@ -339,6 +270,33 @@
 
 /* ------------------------------------------------------------------------- */
 
+void __ide_led(uchar led, uchar status)
+{
+#if defined(CONFIG_IDE_LED) && defined(PER8_BASE) /* required by LED_PORT */
+	static uchar led_buffer;	/* Buffer for current LED status */
+
+	uchar *led_port = LED_PORT;
+
+	if (status)		/* switch LED on        */
+		led_buffer |= led;
+	else			/* switch LED off       */
+		led_buffer &= ~led;
+
+	*led_port = led_buffer;
+#endif
+}
+
+void ide_led(uchar led, uchar status)
+	__attribute__ ((weak, alias("__ide_led")));
+
+#ifndef CONFIG_IDE_LED	/* define LED macros, they are not used anyways */
+# define DEVICE_LED(x) 0
+# define LED_IDE1 1
+# define LED_IDE2 2
+#endif
+
+/* ------------------------------------------------------------------------- */
+
 inline void __ide_outb(int dev, int port, unsigned char val)
 {
 	debug("ide_outb (dev= %d, port= 0x%x, val= 0x%02x) : @ 0x%08lx\n",
@@ -392,25 +350,14 @@
 
 void ide_init(void)
 {
-
-#ifdef CONFIG_IDE_8xx_DIRECT
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
-#endif
 	unsigned char c;
 	int i, bus;
 
-#if defined(CONFIG_SC3)
-	unsigned int ata_reset_time = ATA_RESET_TIME;
-#endif
 #ifdef CONFIG_IDE_8xx_PCCARD
-	extern int pcmcia_on(void);
 	extern int ide_devices_found;	/* Initialized in check_ide_device() */
 #endif /* CONFIG_IDE_8xx_PCCARD */
 
 #ifdef CONFIG_IDE_PREINIT
-	extern int ide_preinit(void);
-
 	WATCHDOG_RESET();
 
 	if (ide_preinit()) {
@@ -419,40 +366,8 @@
 	}
 #endif /* CONFIG_IDE_PREINIT */
 
-#ifdef CONFIG_IDE_8xx_PCCARD
-	extern int pcmcia_on(void);
-	extern int ide_devices_found;	/* Initialized in check_ide_device() */
-
 	WATCHDOG_RESET();
 
-	ide_devices_found = 0;
-	/* initialize the PCMCIA IDE adapter card */
-	pcmcia_on();
-	if (!ide_devices_found)
-		return;
-	udelay(1000000);	/* 1 s */
-#endif /* CONFIG_IDE_8xx_PCCARD */
-
-	WATCHDOG_RESET();
-
-#ifdef CONFIG_IDE_8xx_DIRECT
-	/* Initialize PIO timing tables */
-	for (i = 0; i <= IDE_MAX_PIO_MODE; ++i) {
-		pio_config_clk[i].t_setup =
-			PCMCIA_MK_CLKS(pio_config_ns[i].t_setup, gd->bus_clk);
-		pio_config_clk[i].t_length =
-			PCMCIA_MK_CLKS(pio_config_ns[i].t_length,
-				       gd->bus_clk);
-		pio_config_clk[i].t_hold =
-			PCMCIA_MK_CLKS(pio_config_ns[i].t_hold, gd->bus_clk);
-		debug("PIO Mode %d: setup=%2d ns/%d clk" "  len=%3d ns/%d clk"
-		      "  hold=%2d ns/%d clk\n", i, pio_config_ns[i].t_setup,
-		      pio_config_clk[i].t_setup, pio_config_ns[i].t_length,
-		      pio_config_clk[i].t_length, pio_config_ns[i].t_hold,
-		      pio_config_clk[i].t_hold);
-	}
-#endif /* CONFIG_IDE_8xx_DIRECT */
-
 	/*
 	 * Reset the IDE just to be sure.
 	 * Light LED's to show
@@ -462,14 +377,14 @@
 	/* ATAPI Drives seems to need a proper IDE Reset */
 	ide_reset();
 
-#ifdef CONFIG_IDE_8xx_DIRECT
-	/* PCMCIA / IDE initialization for common mem space */
-	pcmp->pcmc_pgcrb = 0;
+#ifdef CONFIG_IDE_INIT_POSTRESET
+	WATCHDOG_RESET();
 
-	/* start in PIO mode 0 - most relaxed timings */
-	pio_mode = 0;
-	set_pcmcia_timing(pio_mode);
-#endif /* CONFIG_IDE_8xx_DIRECT */
+	if (ide_init_postreset()) {
+		puts("ide_preinit_postreset failed\n");
+		return;
+	}
+#endif /* CONFIG_IDE_INIT_POSTRESET */
 
 	/*
 	 * Wait for IDE to get ready.
@@ -502,11 +417,7 @@
 
 			c = ide_inb(dev, ATA_STATUS);
 			i++;
-#if defined(CONFIG_SC3)
-			if (i > (ata_reset_time * 100)) {
-#else
 			if (i > (ATA_RESET_TIME * 100)) {
-#endif
 				puts("** Timeout **\n");
 				/* LED's off */
 				ide_led((LED_IDE1 | LED_IDE2), 0);
@@ -538,9 +449,7 @@
 
 	curr_device = -1;
 	for (i = 0; i < CONFIG_SYS_IDE_MAXDEVICE; ++i) {
-#ifdef CONFIG_IDE_LED
 		int led = (IDE_BUS(i) == 0) ? LED_IDE1 : LED_IDE2;
-#endif
 		ide_dev_desc[i].type = DEV_TYPE_UNKNOWN;
 		ide_dev_desc[i].if_type = IF_TYPE_IDE;
 		ide_dev_desc[i].dev = i;
@@ -575,120 +484,26 @@
 }
 #endif
 
-
-#ifdef CONFIG_IDE_8xx_DIRECT
-
-static void set_pcmcia_timing(int pmode)
-{
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-	volatile pcmconf8xx_t *pcmp = &(immr->im_pcmcia);
-	ulong timings;
-
-	debug("Set timing for PIO Mode %d\n", pmode);
-
-	timings = PCMCIA_SHT(pio_config_clk[pmode].t_hold)
-		| PCMCIA_SST(pio_config_clk[pmode].t_setup)
-		| PCMCIA_SL(pio_config_clk[pmode].t_length);
-
-	/*
-	 * IDE 0
-	 */
-	pcmp->pcmc_pbr0 = CONFIG_SYS_PCMCIA_PBR0;
-	pcmp->pcmc_por0 = CONFIG_SYS_PCMCIA_POR0
-#if (CONFIG_SYS_PCMCIA_POR0 != 0)
-		| timings
-#endif
-		;
-	debug("PBR0: %08x  POR0: %08x\n", pcmp->pcmc_pbr0, pcmp->pcmc_por0);
-
-	pcmp->pcmc_pbr1 = CONFIG_SYS_PCMCIA_PBR1;
-	pcmp->pcmc_por1 = CONFIG_SYS_PCMCIA_POR1
-#if (CONFIG_SYS_PCMCIA_POR1 != 0)
-		| timings
-#endif
-		;
-	debug("PBR1: %08x  POR1: %08x\n", pcmp->pcmc_pbr1, pcmp->pcmc_por1);
-
-	pcmp->pcmc_pbr2 = CONFIG_SYS_PCMCIA_PBR2;
-	pcmp->pcmc_por2 = CONFIG_SYS_PCMCIA_POR2
-#if (CONFIG_SYS_PCMCIA_POR2 != 0)
-		| timings
-#endif
-		;
-	debug("PBR2: %08x  POR2: %08x\n", pcmp->pcmc_pbr2, pcmp->pcmc_por2);
-
-	pcmp->pcmc_pbr3 = CONFIG_SYS_PCMCIA_PBR3;
-	pcmp->pcmc_por3 = CONFIG_SYS_PCMCIA_POR3
-#if (CONFIG_SYS_PCMCIA_POR3 != 0)
-		| timings
-#endif
-		;
-	debug("PBR3: %08x  POR3: %08x\n", pcmp->pcmc_pbr3, pcmp->pcmc_por3);
-
-	/*
-	 * IDE 1
-	 */
-	pcmp->pcmc_pbr4 = CONFIG_SYS_PCMCIA_PBR4;
-	pcmp->pcmc_por4 = CONFIG_SYS_PCMCIA_POR4
-#if (CONFIG_SYS_PCMCIA_POR4 != 0)
-		| timings
-#endif
-		;
-	debug("PBR4: %08x  POR4: %08x\n", pcmp->pcmc_pbr4, pcmp->pcmc_por4);
-
-	pcmp->pcmc_pbr5 = CONFIG_SYS_PCMCIA_PBR5;
-	pcmp->pcmc_por5 = CONFIG_SYS_PCMCIA_POR5
-#if (CONFIG_SYS_PCMCIA_POR5 != 0)
-		| timings
-#endif
-		;
-	debug("PBR5: %08x  POR5: %08x\n", pcmp->pcmc_pbr5, pcmp->pcmc_por5);
-
-	pcmp->pcmc_pbr6 = CONFIG_SYS_PCMCIA_PBR6;
-	pcmp->pcmc_por6 = CONFIG_SYS_PCMCIA_POR6
-#if (CONFIG_SYS_PCMCIA_POR6 != 0)
-		| timings
-#endif
-		;
-	debug("PBR6: %08x  POR6: %08x\n", pcmp->pcmc_pbr6, pcmp->pcmc_por6);
-
-	pcmp->pcmc_pbr7 = CONFIG_SYS_PCMCIA_PBR7;
-	pcmp->pcmc_por7 = CONFIG_SYS_PCMCIA_POR7
-#if (CONFIG_SYS_PCMCIA_POR7 != 0)
-		| timings
-#endif
-		;
-	debug("PBR7: %08x  POR7: %08x\n", pcmp->pcmc_pbr7, pcmp->pcmc_por7);
-
-}
-
-#endif /* CONFIG_IDE_8xx_DIRECT */
-
 /* ------------------------------------------------------------------------- */
 
-/* We only need to swap data if we are running on a big endian cpu. */
-/* But Au1x00 cpu:s already swaps data in big endian mode! */
-#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SOC_AU1X00)
-#define input_swap_data(x,y,z) input_data(x,y,z)
-#else
-static void input_swap_data(int dev, ulong *sect_buf, int words)
-{
-#if defined(CONFIG_CPC45)
-	uchar i;
-	volatile uchar *pbuf_even =
-		(uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
-	volatile uchar *pbuf_odd =
-		(uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
-	ushort *dbuf = (ushort *) sect_buf;
+void ide_input_swap_data(int dev, ulong *sect_buf, int words)
+	__attribute__ ((weak, alias("__ide_input_swap_data")));
 
-	while (words--) {
-		for (i = 0; i < 2; i++) {
-			*(((uchar *) (dbuf)) + 1) = *pbuf_even;
-			*(uchar *) dbuf = *pbuf_odd;
-			dbuf += 1;
-		}
-	}
+void ide_input_data(int dev, ulong *sect_buf, int words)
+	__attribute__ ((weak, alias("__ide_input_data")));
+
+void ide_output_data(int dev, const ulong *sect_buf, int words)
+	__attribute__ ((weak, alias("__ide_output_data")));
+
+/* We only need to swap data if we are running on a big endian cpu. */
+#if defined(__LITTLE_ENDIAN)
+void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
+{
+	ide_input_data(dev, sect_buf, words);
+}
 #else
+void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
+{
 	volatile ushort *pbuf =
 		(ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
 	ushort *dbuf = (ushort *) sect_buf;
@@ -700,64 +515,32 @@
 #ifdef __MIPS__
 		*dbuf++ = swab16p((u16 *) pbuf);
 		*dbuf++ = swab16p((u16 *) pbuf);
-#elif defined(CONFIG_PCS440EP)
-		*dbuf++ = *pbuf;
-		*dbuf++ = *pbuf;
 #else
 		*dbuf++ = ld_le16(pbuf);
 		*dbuf++ = ld_le16(pbuf);
 #endif /* !MIPS */
 	}
-#endif
 }
-#endif /* __LITTLE_ENDIAN || CONFIG_AU1X00 */
+#endif /* __LITTLE_ENDIAN */
 
 
 #if defined(CONFIG_IDE_SWAP_IO)
-static void output_data(int dev, const ulong *sect_buf, int words)
+void __ide_output_data(int dev, const ulong *sect_buf, int words)
 {
-#if defined(CONFIG_CPC45)
-	uchar *dbuf;
-	volatile uchar *pbuf_even;
-	volatile uchar *pbuf_odd;
-
-	pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
-	pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
-	dbuf = (uchar *) sect_buf;
-	while (words--) {
-		EIEIO;
-		*pbuf_even = *dbuf++;
-		EIEIO;
-		*pbuf_odd = *dbuf++;
-		EIEIO;
-		*pbuf_even = *dbuf++;
-		EIEIO;
-		*pbuf_odd = *dbuf++;
-	}
-#else
 	ushort *dbuf;
 	volatile ushort *pbuf;
 
 	pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
 	dbuf = (ushort *) sect_buf;
 	while (words--) {
-#if defined(CONFIG_PCS440EP)
-		/* not tested, because CF was write protected */
-		EIEIO;
-		*pbuf = ld_le16(dbuf++);
-		EIEIO;
-		*pbuf = ld_le16(dbuf++);
-#else
 		EIEIO;
 		*pbuf = *dbuf++;
 		EIEIO;
 		*pbuf = *dbuf++;
-#endif
 	}
-#endif
 }
 #else  /* ! CONFIG_IDE_SWAP_IO */
-static void output_data(int dev, const ulong *sect_buf, int words)
+void __ide_output_data(int dev, const ulong *sect_buf, int words)
 {
 #if defined(CONFIG_IDE_AHB)
 	ide_write_data(dev, sect_buf, words);
@@ -768,31 +551,8 @@
 #endif /* CONFIG_IDE_SWAP_IO */
 
 #if defined(CONFIG_IDE_SWAP_IO)
-static void input_data(int dev, ulong *sect_buf, int words)
+void __ide_input_data(int dev, ulong *sect_buf, int words)
 {
-#if defined(CONFIG_CPC45)
-	uchar *dbuf;
-	volatile uchar *pbuf_even;
-	volatile uchar *pbuf_odd;
-
-	pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
-	pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
-	dbuf = (uchar *) sect_buf;
-	while (words--) {
-		*dbuf++ = *pbuf_even;
-		EIEIO;
-		SYNC;
-		*dbuf++ = *pbuf_odd;
-		EIEIO;
-		SYNC;
-		*dbuf++ = *pbuf_even;
-		EIEIO;
-		SYNC;
-		*dbuf++ = *pbuf_odd;
-		EIEIO;
-		SYNC;
-	}
-#else
 	ushort *dbuf;
 	volatile ushort *pbuf;
 
@@ -802,22 +562,14 @@
 	debug("in input data base for read is %lx\n", (unsigned long) pbuf);
 
 	while (words--) {
-#if defined(CONFIG_PCS440EP)
-		EIEIO;
-		*dbuf++ = ld_le16(pbuf);
-		EIEIO;
-		*dbuf++ = ld_le16(pbuf);
-#else
 		EIEIO;
 		*dbuf++ = *pbuf;
 		EIEIO;
 		*dbuf++ = *pbuf;
-#endif
 	}
-#endif
 }
 #else  /* ! CONFIG_IDE_SWAP_IO */
-static void input_data(int dev, ulong *sect_buf, int words)
+void __ide_input_data(int dev, ulong *sect_buf, int words)
 {
 #if defined(CONFIG_IDE_AHB)
 	ide_read_data(dev, sect_buf, words);
@@ -927,7 +679,7 @@
 		return;
 #endif
 
-	input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS);
+	ide_input_swap_data(device, (ulong *)&iop, ATA_SECTORWORDS);
 
 	ident_cpy((unsigned char *) dev_desc->revision, iop.fw_rev,
 		  sizeof(dev_desc->revision));
@@ -1075,7 +827,7 @@
 
 /* ------------------------------------------------------------------------- */
 
-ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer)
+ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
 {
 	ulong n = 0;
 	unsigned char c;
@@ -1089,7 +841,7 @@
 		lba48 = 1;
 	}
 #endif
-	debug("ide_read dev %d start %lX, blocks %lX buffer at %lX\n",
+	debug("ide_read dev %d start %lX, blocks " LBAF " buffer at %lX\n",
 	      device, blknr, blkcnt, (ulong) buffer);
 
 	ide_led(DEVICE_LED(device), 1);	/* LED on       */
@@ -1179,17 +931,12 @@
 
 		if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) !=
 		    ATA_STAT_DRQ) {
-#if defined(CONFIG_SYS_64BIT_LBA)
-			printf("Error (no IRQ) dev %d blk %lld: status 0x%02x\n",
+			printf("Error (no IRQ) dev %d blk %ld: status %#02x\n",
 				device, blknr, c);
-#else
-			printf("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
-				device, (ulong) blknr, c);
-#endif
 			break;
 		}
 
-		input_data(device, buffer, ATA_SECTORWORDS);
+		ide_input_data(device, buffer, ATA_SECTORWORDS);
 		(void) ide_inb(device, ATA_STATUS);	/* clear IRQ */
 
 		++n;
@@ -1204,7 +951,7 @@
 /* ------------------------------------------------------------------------- */
 
 
-ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, const void *buffer)
+ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer)
 {
 	ulong n = 0;
 	unsigned char c;
@@ -1272,17 +1019,12 @@
 
 		if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) !=
 		    ATA_STAT_DRQ) {
-#if defined(CONFIG_SYS_64BIT_LBA)
-			printf("Error (no IRQ) dev %d blk %lld: status 0x%02x\n",
+			printf("Error (no IRQ) dev %d blk %ld: status %#02x\n",
 				device, blknr, c);
-#else
-			printf("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
-				device, (ulong) blknr, c);
-#endif
 			goto WR_OUT;
 		}
 
-		output_data(device, buffer, ATA_SECTORWORDS);
+		ide_output_data(device, buffer, ATA_SECTORWORDS);
 		c = ide_inb(device, ATA_STATUS);	/* clear IRQ */
 		++n;
 		++blknr;
@@ -1352,9 +1094,6 @@
 
 static void ide_reset(void)
 {
-#if defined(CONFIG_SYS_PB_12V_ENABLE) || defined(CONFIG_SYS_PB_IDE_MOTOR)
-	volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR;
-#endif
 	int i;
 
 	curr_device = -1;
@@ -1370,51 +1109,6 @@
 
 	WATCHDOG_RESET();
 
-#ifdef CONFIG_SYS_PB_12V_ENABLE
-	/* 12V Enable output OFF */
-	immr->im_cpm.cp_pbdat &= ~(CONFIG_SYS_PB_12V_ENABLE);
-
-	immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_12V_ENABLE);
-	immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_12V_ENABLE);
-	immr->im_cpm.cp_pbdir |= CONFIG_SYS_PB_12V_ENABLE;
-
-	/* wait 500 ms for the voltage to stabilize */
-	for (i = 0; i < 500; ++i)
-		udelay(1000);
-
-	/* 12V Enable output ON */
-	immr->im_cpm.cp_pbdat |= CONFIG_SYS_PB_12V_ENABLE;
-#endif /* CONFIG_SYS_PB_12V_ENABLE */
-
-#ifdef CONFIG_SYS_PB_IDE_MOTOR
-	/* configure IDE Motor voltage monitor pin as input */
-	immr->im_cpm.cp_pbpar &= ~(CONFIG_SYS_PB_IDE_MOTOR);
-	immr->im_cpm.cp_pbodr &= ~(CONFIG_SYS_PB_IDE_MOTOR);
-	immr->im_cpm.cp_pbdir &= ~(CONFIG_SYS_PB_IDE_MOTOR);
-
-	/* wait up to 1 s for the motor voltage to stabilize */
-	for (i = 0; i < 1000; ++i) {
-		if ((immr->im_cpm.cp_pbdat & CONFIG_SYS_PB_IDE_MOTOR) != 0) {
-			break;
-		}
-		udelay(1000);
-	}
-
-	if (i == 1000) {	/* Timeout */
-		printf("\nWarning: 5V for IDE Motor missing\n");
-#ifdef CONFIG_STATUS_LED
-#ifdef STATUS_LED_YELLOW
-		status_led_set(STATUS_LED_YELLOW, STATUS_LED_ON);
-#endif
-#ifdef STATUS_LED_GREEN
-		status_led_set(STATUS_LED_GREEN, STATUS_LED_OFF);
-#endif
-#endif /* CONFIG_STATUS_LED */
-	}
-#endif /* CONFIG_SYS_PB_IDE_MOTOR */
-
-	WATCHDOG_RESET();
-
 	/* de-assert RESET signal */
 	ide_set_reset(0);
 
@@ -1427,27 +1121,6 @@
 
 /* ------------------------------------------------------------------------- */
 
-#if defined(CONFIG_IDE_LED)	&& \
-   !defined(CONFIG_CPC45)	&& \
-   !defined(CONFIG_KUP4K)	&& \
-   !defined(CONFIG_KUP4X)
-
-static uchar led_buffer;	/* Buffer for current LED status        */
-
-static void ide_led(uchar led, uchar status)
-{
-	uchar *led_port = LED_PORT;
-
-	if (status)		/* switch LED on        */
-		led_buffer |= led;
-	else			/* switch LED off       */
-		led_buffer &= ~led;
-
-	*led_port = led_buffer;
-}
-
-#endif /* CONFIG_IDE_LED */
-
 #if defined(CONFIG_OF_IDE_FIXUP)
 int ide_device_present(int dev)
 {
@@ -1463,25 +1136,18 @@
  * ATAPI Support
  */
 
+void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
+	__attribute__ ((weak, alias("__ide_input_data_shorts")));
+
+void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
+	__attribute__ ((weak, alias("__ide_output_data_shorts")));
+
+
 #if defined(CONFIG_IDE_SWAP_IO)
 /* since ATAPI may use commands with not 4 bytes alligned length
  * we have our own transfer functions, 2 bytes alligned */
-static void output_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
 {
-#if defined(CONFIG_CPC45)
-	uchar *dbuf;
-	volatile uchar *pbuf_even;
-	volatile uchar *pbuf_odd;
-
-	pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
-	pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
-	while (shorts--) {
-		EIEIO;
-		*pbuf_even = *dbuf++;
-		EIEIO;
-		*pbuf_odd = *dbuf++;
-	}
-#else
 	ushort *dbuf;
 	volatile ushort *pbuf;
 
@@ -1495,25 +1161,10 @@
 		EIEIO;
 		*pbuf = *dbuf++;
 	}
-#endif
 }
 
-static void input_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
 {
-#if defined(CONFIG_CPC45)
-	uchar *dbuf;
-	volatile uchar *pbuf_even;
-	volatile uchar *pbuf_odd;
-
-	pbuf_even = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_EVEN);
-	pbuf_odd = (uchar *) (ATA_CURR_BASE(dev) + ATA_DATA_ODD);
-	while (shorts--) {
-		EIEIO;
-		*dbuf++ = *pbuf_even;
-		EIEIO;
-		*dbuf++ = *pbuf_odd;
-	}
-#else
 	ushort *dbuf;
 	volatile ushort *pbuf;
 
@@ -1527,16 +1178,15 @@
 		EIEIO;
 		*dbuf++ = *pbuf;
 	}
-#endif
 }
 
 #else  /* ! CONFIG_IDE_SWAP_IO */
-static void output_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_output_data_shorts(int dev, ushort *sect_buf, int shorts)
 {
 	outsw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts);
 }
 
-static void input_data_shorts(int dev, ushort *sect_buf, int shorts)
+void __ide_input_data_shorts(int dev, ushort *sect_buf, int shorts)
 {
 	insw(ATA_CURR_BASE(dev) + ATA_DATA_REG, sect_buf, shorts);
 }
@@ -1615,7 +1265,7 @@
 	}
 
 	/* write command block */
-	output_data_shorts(device, (unsigned short *) ccb, ccblen / 2);
+	ide_output_data_shorts(device, (unsigned short *) ccb, ccblen / 2);
 
 	/* ATAPI Command written wait for completition */
 	udelay(5000);		/* device must set bsy */
@@ -1666,12 +1316,12 @@
 		/* ok now decide if it is an in or output */
 		if ((ide_inb(device, ATA_SECT_CNT) & 0x02) == 0) {
 			debug("Write to device\n");
-			output_data_shorts(device, (unsigned short *) buffer,
-					   n);
+			ide_output_data_shorts(device,
+				(unsigned short *) buffer, n);
 		} else {
 			debug("Read from device @ %p shorts %d\n", buffer, n);
-			input_data_shorts(device, (unsigned short *) buffer,
-					  n);
+			ide_input_data_shorts(device,
+				(unsigned short *) buffer, n);
 		}
 	}
 	udelay(5000);		/* seems that some CD ROMs need this... */
@@ -1859,13 +1509,13 @@
 #define ATAPI_READ_BLOCK_SIZE	2048	/* assuming CD part */
 #define ATAPI_READ_MAX_BLOCK	(ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE)
 
-ulong atapi_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer)
+ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
 {
 	ulong n = 0;
 	unsigned char ccb[12];	/* Command descriptor block */
 	ulong cnt;
 
-	debug("atapi_read dev %d start %lX, blocks %lX buffer at %lX\n",
+	debug("atapi_read dev %d start %lX, blocks " LBAF " buffer at %lX\n",
 	      device, blknr, blkcnt, (ulong) buffer);
 
 	do {
diff --git a/common/cmd_irq.c b/common/cmd_irq.c
index 9f158ef..1e82883 100644
--- a/common/cmd_irq.c
+++ b/common/cmd_irq.c
@@ -24,7 +24,8 @@
 #include <config.h>
 #include <command.h>
 
-int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_interrupts(cmd_tbl_t *cmdtp, int flag, int argc,
+			 char * const argv[])
 {
 
 	if (argc != 2)
diff --git a/common/cmd_itest.c b/common/cmd_itest.c
index d5df758..2c8e5d0 100644
--- a/common/cmd_itest.c
+++ b/common/cmd_itest.c
@@ -130,7 +130,7 @@
 	return (0);
 }
 
-int binary_test (char *op, char *arg1, char *arg2, int w)
+static int binary_test(char *op, char *arg1, char *arg2, int w)
 {
 	int len, i;
 	const op_tbl_t *optp;
@@ -155,7 +155,7 @@
 }
 
 /* command line interface to the shell test */
-int do_itest ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[] )
+static int do_itest(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int	value, w;
 
diff --git a/common/cmd_load.c b/common/cmd_load.c
index f4d66de..2c8dab1 100644
--- a/common/cmd_load.c
+++ b/common/cmd_load.c
@@ -34,15 +34,15 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #if defined(CONFIG_CMD_LOADB)
-static ulong load_serial_ymodem (ulong offset);
+static ulong load_serial_ymodem(ulong offset);
 #endif
 
 #if defined(CONFIG_CMD_LOADS)
-static ulong load_serial (long offset);
-static int read_record (char *buf, ulong len);
+static ulong load_serial(long offset);
+static int read_record(char *buf, ulong len);
 # if defined(CONFIG_CMD_SAVES)
-static int save_serial (ulong offset, ulong size);
-static int write_record (char *buf);
+static int save_serial(ulong offset, ulong size);
+static int write_record(char *buf);
 #endif
 
 static int do_echo = 1;
@@ -51,7 +51,8 @@
 /* -------------------------------------------------------------------- */
 
 #if defined(CONFIG_CMD_LOADS)
-int do_load_serial (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_load_serial(cmd_tbl_t *cmdtp, int flag, int argc,
+			  char * const argv[])
 {
 	long offset = 0;
 	ulong addr;
@@ -82,11 +83,11 @@
 			load_baudrate = current_baudrate;
 	}
 	if (load_baudrate != current_baudrate) {
-		printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+		printf("## Switch baudrate to %d bps and press ENTER ...\n",
 			load_baudrate);
 		udelay(50000);
 		gd->baudrate = load_baudrate;
-		serial_setbrg ();
+		serial_setbrg();
 		udelay(50000);
 		for (;;) {
 			if (getc() == '\r')
@@ -99,9 +100,9 @@
 	}
 #endif	/* CONFIG_SYS_LOADS_BAUD_CHANGE */
 
-	printf ("## Ready for S-Record download ...\n");
+	printf("## Ready for S-Record download ...\n");
 
-	addr = load_serial (offset);
+	addr = load_serial(offset);
 
 	/*
 	 * Gather any trailing characters (for instance, the ^D which
@@ -116,21 +117,21 @@
 	}
 
 	if (addr == ~0) {
-		printf ("## S-Record download aborted\n");
+		printf("## S-Record download aborted\n");
 		rcode = 1;
 	} else {
-		printf ("## Start Addr      = 0x%08lX\n", addr);
+		printf("## Start Addr      = 0x%08lX\n", addr);
 		load_addr = addr;
 	}
 
 #ifdef	CONFIG_SYS_LOADS_BAUD_CHANGE
 	if (load_baudrate != current_baudrate) {
-		printf ("## Switch baudrate to %d bps and press ESC ...\n",
+		printf("## Switch baudrate to %d bps and press ESC ...\n",
 			current_baudrate);
-		udelay (50000);
+		udelay(50000);
 		gd->baudrate = current_baudrate;
-		serial_setbrg ();
-		udelay (50000);
+		serial_setbrg();
+		udelay(50000);
 		for (;;) {
 			if (getc() == 0x1B) /* ESC */
 				break;
@@ -140,8 +141,7 @@
 	return rcode;
 }
 
-static ulong
-load_serial (long offset)
+static ulong load_serial(long offset)
 {
 	char	record[SREC_MAXRECLEN + 1];	/* buffer for one S-Record	*/
 	char	binbuf[SREC_MAXBINLEN];		/* buffer for binary data	*/
@@ -156,7 +156,7 @@
 	int	line_count =  0;
 
 	while (read_record(record, SREC_MAXRECLEN + 1) >= 0) {
-		type = srec_decode (record, &binlen, &addr, binbuf);
+		type = srec_decode(record, &binlen, &addr, binbuf);
 
 		if (type < 0) {
 			return (~0);		/* Invalid S-Record		*/
@@ -173,13 +173,13 @@
 
 			rc = flash_write((char *)binbuf,store_addr,binlen);
 			if (rc != 0) {
-				flash_perror (rc);
+				flash_perror(rc);
 				return (~0);
 			}
 		    } else
 #endif
 		    {
-			memcpy ((char *)(store_addr), binbuf, binlen);
+			memcpy((char *)(store_addr), binbuf, binlen);
 		    }
 		    if ((store_addr) < start_addr)
 			start_addr = store_addr;
@@ -189,15 +189,15 @@
 		case SREC_END2:
 		case SREC_END3:
 		case SREC_END4:
-		    udelay (10000);
+		    udelay(10000);
 		    size = end_addr - start_addr + 1;
-		    printf ("\n"
+		    printf("\n"
 			    "## First Load Addr = 0x%08lX\n"
 			    "## Last  Load Addr = 0x%08lX\n"
 			    "## Total Size      = 0x%08lX = %ld Bytes\n",
 			    start_addr, end_addr, size, size
 		    );
-		    flush_cache (start_addr, size);
+		    flush_cache(start_addr, size);
 		    sprintf(buf, "%lX", size);
 		    setenv("filesize", buf);
 		    return (addr);
@@ -208,15 +208,14 @@
 		}
 		if (!do_echo) {	/* print a '.' every 100 lines */
 			if ((++line_count % 100) == 0)
-				putc ('.');
+				putc('.');
 		}
 	}
 
 	return (~0);			/* Download aborted		*/
 }
 
-static int
-read_record (char *buf, ulong len)
+static int read_record(char *buf, ulong len)
 {
 	char *p;
 	char c;
@@ -226,7 +225,7 @@
 	for (p=buf; p < buf+len; ++p) {
 		c = getc();		/* read character		*/
 		if (do_echo)
-			putc (c);	/* ... and echo it		*/
+			putc(c);	/* ... and echo it		*/
 
 		switch (c) {
 		case '\r':
@@ -280,11 +279,11 @@
 			save_baudrate = current_baudrate;
 	}
 	if (save_baudrate != current_baudrate) {
-		printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+		printf("## Switch baudrate to %d bps and press ENTER ...\n",
 			save_baudrate);
 		udelay(50000);
 		gd->baudrate = save_baudrate;
-		serial_setbrg ();
+		serial_setbrg();
 		udelay(50000);
 		for (;;) {
 			if (getc() == '\r')
@@ -297,24 +296,24 @@
 	}
 #endif	/* CONFIG_SYS_LOADS_BAUD_CHANGE */
 
-	printf ("## Ready for S-Record upload, press ENTER to proceed ...\n");
+	printf("## Ready for S-Record upload, press ENTER to proceed ...\n");
 	for (;;) {
 		if (getc() == '\r')
 			break;
 	}
-	if(save_serial (offset, size)) {
-		printf ("## S-Record upload aborted\n");
+	if (save_serial(offset, size)) {
+		printf("## S-Record upload aborted\n");
 	} else {
-		printf ("## S-Record upload complete\n");
+		printf("## S-Record upload complete\n");
 	}
 #ifdef	CONFIG_SYS_LOADS_BAUD_CHANGE
 	if (save_baudrate != current_baudrate) {
-		printf ("## Switch baudrate to %d bps and press ESC ...\n",
+		printf("## Switch baudrate to %d bps and press ESC ...\n",
 			(int)current_baudrate);
-		udelay (50000);
+		udelay(50000);
 		gd->baudrate = current_baudrate;
-		serial_setbrg ();
-		udelay (50000);
+		serial_setbrg();
+		udelay(50000);
 		for (;;) {
 			if (getc() == 0x1B) /* ESC */
 				break;
@@ -329,7 +328,7 @@
 #define SREC3_END				"S70500000000FA\n"
 #define SREC_BYTES_PER_RECORD	16
 
-static int save_serial (ulong address, ulong count)
+static int save_serial(ulong address, ulong count)
 {
 	int i, c, reclen, checksum, length;
 	char *hex = "0123456789ABCDEF";
@@ -384,8 +383,7 @@
 	return(0);
 }
 
-static int
-write_record (char *buf)
+static int write_record(char *buf)
 {
 	char c;
 
@@ -425,15 +423,16 @@
 
 static void set_kerm_bin_mode(unsigned long *);
 static int k_recv(void);
-static ulong load_serial_bin (ulong offset);
+static ulong load_serial_bin(ulong offset);
 
 
-char his_eol;        /* character he needs at end of packet */
-int  his_pad_count;  /* number of pad chars he needs */
-char his_pad_char;   /* pad chars he needs */
-char his_quote;      /* quote chars he'll use */
+static char his_eol;        /* character he needs at end of packet */
+static int  his_pad_count;  /* number of pad chars he needs */
+static char his_pad_char;   /* pad chars he needs */
+static char his_quote;      /* quote chars he'll use */
 
-int do_load_serial_bin (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_load_serial_bin(cmd_tbl_t *cmdtp, int flag, int argc,
+			      char * const argv[])
 {
 	ulong offset = 0;
 	ulong addr;
@@ -463,11 +462,11 @@
 	}
 
 	if (load_baudrate != current_baudrate) {
-		printf ("## Switch baudrate to %d bps and press ENTER ...\n",
+		printf("## Switch baudrate to %d bps and press ENTER ...\n",
 			load_baudrate);
 		udelay(50000);
 		gd->baudrate = load_baudrate;
-		serial_setbrg ();
+		serial_setbrg();
 		udelay(50000);
 		for (;;) {
 			if (getc() == '\r')
@@ -476,37 +475,37 @@
 	}
 
 	if (strcmp(argv[0],"loady")==0) {
-		printf ("## Ready for binary (ymodem) download "
+		printf("## Ready for binary (ymodem) download "
 			"to 0x%08lX at %d bps...\n",
 			offset,
 			load_baudrate);
 
-		addr = load_serial_ymodem (offset);
+		addr = load_serial_ymodem(offset);
 
 	} else {
 
-		printf ("## Ready for binary (kermit) download "
+		printf("## Ready for binary (kermit) download "
 			"to 0x%08lX at %d bps...\n",
 			offset,
 			load_baudrate);
-		addr = load_serial_bin (offset);
+		addr = load_serial_bin(offset);
 
 		if (addr == ~0) {
 			load_addr = 0;
-			printf ("## Binary (kermit) download aborted\n");
+			printf("## Binary (kermit) download aborted\n");
 			rcode = 1;
 		} else {
-			printf ("## Start Addr      = 0x%08lX\n", addr);
+			printf("## Start Addr      = 0x%08lX\n", addr);
 			load_addr = addr;
 		}
 	}
 	if (load_baudrate != current_baudrate) {
-		printf ("## Switch baudrate to %d bps and press ESC ...\n",
+		printf("## Switch baudrate to %d bps and press ESC ...\n",
 			current_baudrate);
-		udelay (50000);
+		udelay(50000);
 		gd->baudrate = current_baudrate;
-		serial_setbrg ();
-		udelay (50000);
+		serial_setbrg();
+		udelay(50000);
 		for (;;) {
 			if (getc() == 0x1B) /* ESC */
 				break;
@@ -517,13 +516,13 @@
 }
 
 
-static ulong load_serial_bin (ulong offset)
+static ulong load_serial_bin(ulong offset)
 {
 	int size, i;
 	char buf[32];
 
-	set_kerm_bin_mode ((ulong *) offset);
-	size = k_recv ();
+	set_kerm_bin_mode((ulong *) offset);
+	size = k_recv();
 
 	/*
 	 * Gather any trailing characters (for instance, the ^D which
@@ -537,7 +536,7 @@
 		udelay(1000);
 	}
 
-	flush_cache (offset, size);
+	flush_cache(offset, size);
 
 	printf("## Total Size      = 0x%08x = %d Bytes\n", size, size);
 	sprintf(buf, "%X", size);
@@ -546,16 +545,16 @@
 	return offset;
 }
 
-void send_pad (void)
+static void send_pad(void)
 {
 	int count = his_pad_count;
 
 	while (count-- > 0)
-		putc (his_pad_char);
+		putc(his_pad_char);
 }
 
 /* converts escaped kermit char to binary char */
-char ktrans (char in)
+static char ktrans(char in)
 {
 	if ((in & 0x60) == 0x40) {
 		return (char) (in & ~0x40);
@@ -565,7 +564,7 @@
 		return in;
 }
 
-int chk1 (char *buffer)
+static int chk1(char *buffer)
 {
 	int total = 0;
 
@@ -575,67 +574,67 @@
 	return (int) ((total + ((total >> 6) & 0x03)) & 0x3f);
 }
 
-void s1_sendpacket (char *packet)
+static void s1_sendpacket(char *packet)
 {
-	send_pad ();
+	send_pad();
 	while (*packet) {
-		putc (*packet++);
+		putc(*packet++);
 	}
 }
 
 static char a_b[24];
-void send_ack (int n)
+static void send_ack(int n)
 {
 	a_b[0] = START_CHAR;
-	a_b[1] = tochar (3);
-	a_b[2] = tochar (n);
+	a_b[1] = tochar(3);
+	a_b[2] = tochar(n);
 	a_b[3] = ACK_TYPE;
 	a_b[4] = '\0';
-	a_b[4] = tochar (chk1 (&a_b[1]));
+	a_b[4] = tochar(chk1(&a_b[1]));
 	a_b[5] = his_eol;
 	a_b[6] = '\0';
-	s1_sendpacket (a_b);
+	s1_sendpacket(a_b);
 }
 
-void send_nack (int n)
+static void send_nack(int n)
 {
 	a_b[0] = START_CHAR;
-	a_b[1] = tochar (3);
-	a_b[2] = tochar (n);
+	a_b[1] = tochar(3);
+	a_b[2] = tochar(n);
 	a_b[3] = NACK_TYPE;
 	a_b[4] = '\0';
-	a_b[4] = tochar (chk1 (&a_b[1]));
+	a_b[4] = tochar(chk1(&a_b[1]));
 	a_b[5] = his_eol;
 	a_b[6] = '\0';
-	s1_sendpacket (a_b);
+	s1_sendpacket(a_b);
 }
 
 
-void (*os_data_init) (void);
-void (*os_data_char) (char new_char);
+static void (*os_data_init)(void);
+static void (*os_data_char)(char new_char);
 static int os_data_state, os_data_state_saved;
 static char *os_data_addr, *os_data_addr_saved;
 static char *bin_start_address;
 
-static void bin_data_init (void)
+static void bin_data_init(void)
 {
 	os_data_state = 0;
 	os_data_addr = bin_start_address;
 }
 
-static void os_data_save (void)
+static void os_data_save(void)
 {
 	os_data_state_saved = os_data_state;
 	os_data_addr_saved = os_data_addr;
 }
 
-static void os_data_restore (void)
+static void os_data_restore(void)
 {
 	os_data_state = os_data_state_saved;
 	os_data_addr = os_data_addr_saved;
 }
 
-static void bin_data_char (char new_char)
+static void bin_data_char(char new_char)
 {
 	switch (os_data_state) {
 	case 0:					/* data */
@@ -644,7 +643,7 @@
 	}
 }
 
-static void set_kerm_bin_mode (unsigned long *addr)
+static void set_kerm_bin_mode(unsigned long *addr)
 {
 	bin_start_address = (char *) addr;
 	os_data_init = bin_data_init;
@@ -654,29 +653,29 @@
 
 /* k_data_* simply handles the kermit escape translations */
 static int k_data_escape, k_data_escape_saved;
-void k_data_init (void)
+static void k_data_init(void)
 {
 	k_data_escape = 0;
-	os_data_init ();
+	os_data_init();
 }
 
-void k_data_save (void)
+static void k_data_save(void)
 {
 	k_data_escape_saved = k_data_escape;
-	os_data_save ();
+	os_data_save();
 }
 
-void k_data_restore (void)
+static void k_data_restore(void)
 {
 	k_data_escape = k_data_escape_saved;
-	os_data_restore ();
+	os_data_restore();
 }
 
-void k_data_char (char new_char)
+static void k_data_char(char new_char)
 {
 	if (k_data_escape) {
 		/* last char was escape - translate this character */
-		os_data_char (ktrans (new_char));
+		os_data_char(ktrans(new_char));
 		k_data_escape = 0;
 	} else {
 		if (new_char == his_quote) {
@@ -684,18 +683,18 @@
 			k_data_escape = 1;
 		} else {
 			/* otherwise send this char as-is */
-			os_data_char (new_char);
+			os_data_char(new_char);
 		}
 	}
 }
 
 #define SEND_DATA_SIZE  20
-char send_parms[SEND_DATA_SIZE];
-char *send_ptr;
+static char send_parms[SEND_DATA_SIZE];
+static char *send_ptr;
 
 /* handle_send_packet interprits the protocol info and builds and
    sends an appropriate ack for what we can do */
-void handle_send_packet (int n)
+static void handle_send_packet(int n)
 {
 	int length = 3;
 	int bytes;
@@ -715,30 +714,30 @@
 			break;
 		/* handle MAXL - max length */
 		/* ignore what he says - most I'll take (here) is 94 */
-		a_b[++length] = tochar (94);
+		a_b[++length] = tochar(94);
 		if (bytes-- <= 0)
 			break;
 		/* handle TIME - time you should wait for my packets */
 		/* ignore what he says - don't wait for my ack longer than 1 second */
-		a_b[++length] = tochar (1);
+		a_b[++length] = tochar(1);
 		if (bytes-- <= 0)
 			break;
 		/* handle NPAD - number of pad chars I need */
 		/* remember what he says - I need none */
-		his_pad_count = untochar (send_parms[2]);
-		a_b[++length] = tochar (0);
+		his_pad_count = untochar(send_parms[2]);
+		a_b[++length] = tochar(0);
 		if (bytes-- <= 0)
 			break;
 		/* handle PADC - pad chars I need */
 		/* remember what he says - I need none */
-		his_pad_char = ktrans (send_parms[3]);
+		his_pad_char = ktrans(send_parms[3]);
 		a_b[++length] = 0x40;	/* He should ignore this */
 		if (bytes-- <= 0)
 			break;
 		/* handle EOL - end of line he needs */
 		/* remember what he says - I need CR */
-		his_eol = untochar (send_parms[4]);
-		a_b[++length] = tochar (END_CHAR);
+		his_eol = untochar(send_parms[4]);
+		a_b[++length] = tochar(END_CHAR);
 		if (bytes-- <= 0)
 			break;
 		/* handle QCTL - quote control char he'll use */
@@ -764,25 +763,25 @@
 			break;
 		/* handle CAPAS - the capabilities mask */
 		/* ignore what he says - I only do long packets - I don't do windows */
-		a_b[++length] = tochar (2);	/* only long packets */
-		a_b[++length] = tochar (0);	/* no windows */
-		a_b[++length] = tochar (94);	/* large packet msb */
-		a_b[++length] = tochar (94);	/* large packet lsb */
+		a_b[++length] = tochar(2);	/* only long packets */
+		a_b[++length] = tochar(0);	/* no windows */
+		a_b[++length] = tochar(94);	/* large packet msb */
+		a_b[++length] = tochar(94);	/* large packet lsb */
 	} while (0);
 
 	a_b[0] = START_CHAR;
-	a_b[1] = tochar (length);
-	a_b[2] = tochar (n);
+	a_b[1] = tochar(length);
+	a_b[2] = tochar(n);
 	a_b[3] = ACK_TYPE;
 	a_b[++length] = '\0';
-	a_b[length] = tochar (chk1 (&a_b[1]));
+	a_b[length] = tochar(chk1(&a_b[1]));
 	a_b[++length] = his_eol;
 	a_b[++length] = '\0';
-	s1_sendpacket (a_b);
+	s1_sendpacket(a_b);
 }
 
 /* k_recv receives a OS Open image file over kermit line */
-static int k_recv (void)
+static int k_recv(void)
 {
 	char new_char;
 	char k_state, k_state_saved;
@@ -801,9 +800,9 @@
 	/* initialize the k_recv and k_data state machine */
 	done = 0;
 	k_state = 0;
-	k_data_init ();
+	k_data_init();
 	k_state_saved = k_state;
-	k_data_save ();
+	k_data_save();
 	n = 0;				/* just to get rid of a warning */
 	last_n = -1;
 
@@ -848,17 +847,17 @@
 START:
 		/* get length of packet */
 		sum = 0;
-		new_char = getc ();
+		new_char = getc();
 		if ((new_char & 0xE0) == 0)
 			goto packet_error;
 		sum += new_char & 0xff;
-		length = untochar (new_char);
+		length = untochar(new_char);
 		/* get sequence number */
-		new_char = getc ();
+		new_char = getc();
 		if ((new_char & 0xE0) == 0)
 			goto packet_error;
 		sum += new_char & 0xff;
-		n = untochar (new_char);
+		n = untochar(new_char);
 		--length;
 
 		/* NEW CODE - check sequence numbers for retried packets */
@@ -871,17 +870,17 @@
 		if (n == last_n) {
 			/* same sequence number, restore the previous state */
 			k_state = k_state_saved;
-			k_data_restore ();
+			k_data_restore();
 		} else {
 			/* new sequence number, checkpoint the download */
 			last_n = n;
 			k_state_saved = k_state;
-			k_data_save ();
+			k_data_save();
 		}
 		/* END NEW CODE */
 
 		/* get packet type */
-		new_char = getc ();
+		new_char = getc();
 		if ((new_char & 0xE0) == 0)
 			goto packet_error;
 		sum += new_char & 0xff;
@@ -891,29 +890,29 @@
 		if (length == -2) {
 			/* (length byte was 0, decremented twice) */
 			/* get the two length bytes */
-			new_char = getc ();
+			new_char = getc();
 			if ((new_char & 0xE0) == 0)
 				goto packet_error;
 			sum += new_char & 0xff;
-			len_hi = untochar (new_char);
-			new_char = getc ();
+			len_hi = untochar(new_char);
+			new_char = getc();
 			if ((new_char & 0xE0) == 0)
 				goto packet_error;
 			sum += new_char & 0xff;
-			len_lo = untochar (new_char);
+			len_lo = untochar(new_char);
 			length = len_hi * 95 + len_lo;
 			/* check header checksum */
-			new_char = getc ();
+			new_char = getc();
 			if ((new_char & 0xE0) == 0)
 				goto packet_error;
-			if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
+			if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f))
 				goto packet_error;
 			sum += new_char & 0xff;
 /* --length; */ /* new length includes only data and block check to come */
 		}
 		/* bring in rest of packet */
 		while (length > 1) {
-			new_char = getc ();
+			new_char = getc();
 			if ((new_char & 0xE0) == 0)
 				goto packet_error;
 			sum += new_char & 0xff;
@@ -930,26 +929,26 @@
 			}
 		}
 		/* get and validate checksum character */
-		new_char = getc ();
+		new_char = getc();
 		if ((new_char & 0xE0) == 0)
 			goto packet_error;
-		if (new_char != tochar ((sum + ((sum >> 6) & 0x03)) & 0x3f))
+		if (new_char != tochar((sum + ((sum >> 6) & 0x03)) & 0x3f))
 			goto packet_error;
 		/* get END_CHAR */
-		new_char = getc ();
+		new_char = getc();
 		if (new_char != END_CHAR) {
 		  packet_error:
 			/* restore state machines */
 			k_state = k_state_saved;
-			k_data_restore ();
+			k_data_restore();
 			/* send a negative acknowledge packet in */
-			send_nack (n);
+			send_nack(n);
 		} else if (k_state == SEND_TYPE) {
 			/* crack the protocol parms, build an appropriate ack packet */
-			handle_send_packet (n);
+			handle_send_packet(n);
 		} else {
 			/* send simple acknowledge packet in */
-			send_ack (n);
+			send_ack(n);
 			/* quit if end of transmission */
 			if (k_state == BREAK_TYPE)
 				done = 1;
@@ -963,7 +962,7 @@
 		return (getc());
 	return -1;
 }
-static ulong load_serial_ymodem (ulong offset)
+static ulong load_serial_ymodem(ulong offset)
 {
 	int size;
 	char buf[32];
@@ -976,19 +975,19 @@
 
 	size = 0;
 	info.mode = xyzModem_ymodem;
-	res = xyzModem_stream_open (&info, &err);
+	res = xyzModem_stream_open(&info, &err);
 	if (!res) {
 
 		while ((res =
-			xyzModem_stream_read (ymodemBuf, 1024, &err)) > 0) {
+			xyzModem_stream_read(ymodemBuf, 1024, &err)) > 0) {
 			store_addr = addr + offset;
 			size += res;
 			addr += res;
 #ifndef CONFIG_SYS_NO_FLASH
-			if (addr2info (store_addr)) {
+			if (addr2info(store_addr)) {
 				int rc;
 
-				rc = flash_write ((char *) ymodemBuf,
+				rc = flash_write((char *) ymodemBuf,
 						  store_addr, res);
 				if (rc != 0) {
 					flash_perror (rc);
@@ -997,24 +996,24 @@
 			} else
 #endif
 			{
-				memcpy ((char *) (store_addr), ymodemBuf,
+				memcpy((char *)(store_addr), ymodemBuf,
 					res);
 			}
 
 		}
 	} else {
-		printf ("%s\n", xyzModem_error (err));
+		printf("%s\n", xyzModem_error(err));
 	}
 
-	xyzModem_stream_close (&err);
-	xyzModem_stream_terminate (false, &getcxmodem);
+	xyzModem_stream_close(&err);
+	xyzModem_stream_terminate(false, &getcxmodem);
 
 
-	flush_cache (offset, size);
+	flush_cache(offset, size);
 
-	printf ("## Total Size      = 0x%08x = %d Bytes\n", size, size);
-	sprintf (buf, "%X", size);
-	setenv ("filesize", buf);
+	printf("## Total Size      = 0x%08x = %d Bytes\n", size, size);
+	sprintf(buf, "%X", size);
+	setenv("filesize", buf);
 
 	return offset;
 }
@@ -1091,7 +1090,7 @@
 /* -------------------------------------------------------------------- */
 
 #if defined(CONFIG_CMD_HWFLOW)
-int do_hwflow (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_hwflow(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	extern int hwflow_onoff(int);
 
diff --git a/common/cmd_mdio.c b/common/cmd_mdio.c
index 77d8df1..ff0063b 100644
--- a/common/cmd_mdio.c
+++ b/common/cmd_mdio.c
@@ -57,9 +57,9 @@
 	return 0;
 }
 
-int mdio_write_ranges(struct mii_dev *bus, int addrlo,
-			int addrhi, int devadlo, int devadhi,
-			int reglo, int reghi, unsigned short data)
+static int mdio_write_ranges(struct mii_dev *bus, int addrlo,
+			     int addrhi, int devadlo, int devadhi,
+			     int reglo, int reghi, unsigned short data)
 {
 	int addr, devad, reg;
 	int err = 0;
@@ -79,9 +79,9 @@
 	return err;
 }
 
-int mdio_read_ranges(struct mii_dev *bus, int addrlo,
-			int addrhi, int devadlo, int devadhi,
-			int reglo, int reghi)
+static int mdio_read_ranges(struct mii_dev *bus, int addrlo,
+			    int addrhi, int devadlo, int devadhi,
+			    int reglo, int reghi)
 {
 	int addr, devad, reg;
 
@@ -112,8 +112,8 @@
 }
 
 /* The register will be in the form [a[-b].]x[-y] */
-int extract_reg_range(char *input, int *devadlo, int *devadhi,
-		int *reglo, int *reghi)
+static int extract_reg_range(char *input, int *devadlo, int *devadhi,
+			     int *reglo, int *reghi)
 {
 	char *regstr;
 
@@ -141,8 +141,8 @@
 	return extract_range(regstr, reglo, reghi);
 }
 
-int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
-		int *addrlo, int *addrhi)
+static int extract_phy_range(char *const argv[], int argc, struct mii_dev **bus,
+			     int *addrlo, int *addrhi)
 {
 	struct phy_device *phydev;
 
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 18f0a3f..4d64cff 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -51,7 +51,7 @@
  *	md{.b, .w, .l} {addr} {len}
  */
 #define DISP_LINE_LEN	16
-int do_mem_md ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_md(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong	addr, length;
 #if defined(CONFIG_HAS_DATAFLASH)
@@ -147,16 +147,16 @@
 	return (rc);
 }
 
-int do_mem_mm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_mm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	return mod_mem (cmdtp, 1, flag, argc, argv);
 }
-int do_mem_nm ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_nm(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	return mod_mem (cmdtp, 0, flag, argc, argv);
 }
 
-int do_mem_mw ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_mw(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong	addr, writeval, count;
 	int	size;
@@ -253,7 +253,7 @@
 }
 #endif /* CONFIG_MX_CYCLIC */
 
-int do_mem_cmp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_cmp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong	addr1, addr2, count, ngood;
 	int	size;
@@ -323,7 +323,7 @@
 	return rcode;
 }
 
-int do_mem_cp ( cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_cp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong	addr, dest, count;
 	int	size;
@@ -433,7 +433,8 @@
 	return 0;
 }
 
-int do_mem_base (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_base(cmd_tbl_t *cmdtp, int flag, int argc,
+		       char * const argv[])
 {
 	if (argc > 1) {
 		/* Set new base address.
@@ -446,7 +447,8 @@
 	return 0;
 }
 
-int do_mem_loop (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_loop(cmd_tbl_t *cmdtp, int flag, int argc,
+		       char * const argv[])
 {
 	ulong	addr, length, i;
 	int	size;
@@ -592,7 +594,8 @@
  * configured using CONFIG_SYS_ALT_MEMTEST. The complete test loops until
  * interrupted by ctrl-c or by a failure of one of the sub-tests.
  */
-int do_mem_mtest (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_mtest(cmd_tbl_t *cmdtp, int flag, int argc,
+			char * const argv[])
 {
 	vu_long	*addr, *start, *end;
 	ulong	val;
@@ -612,7 +615,7 @@
 #if defined(CONFIG_SYS_MEMTEST_SCRATCH)
 	vu_long *dummy = (vu_long*)CONFIG_SYS_MEMTEST_SCRATCH;
 #else
-	vu_long *dummy = 0;	/* yes, this is address 0x0, not NULL */
+	vu_long *dummy = NULL;	/* yes, this is address 0x0, not NULL */
 #endif
 	int	j;
 
@@ -1054,7 +1057,7 @@
 
 #ifndef CONFIG_CRC32_VERIFY
 
-int do_mem_crc (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mem_crc(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong addr, length;
 	ulong crc;
diff --git a/common/cmd_misc.c b/common/cmd_misc.c
index 3b47a0c..dc2772e 100644
--- a/common/cmd_misc.c
+++ b/common/cmd_misc.c
@@ -27,7 +27,7 @@
 #include <common.h>
 #include <command.h>
 
-int do_sleep (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_sleep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong start = get_timer(0);
 	ulong delay;
@@ -38,10 +38,10 @@
 	delay = simple_strtoul(argv[1], NULL, 10) * CONFIG_SYS_HZ;
 
 	while (get_timer(start) < delay) {
-		if (ctrlc ())
+		if (ctrlc())
 			return (-1);
 
-		udelay (100);
+		udelay(100);
 	}
 
 	return 0;
diff --git a/common/cmd_mmc.c b/common/cmd_mmc.c
index 79a1088..62a1c22 100644
--- a/common/cmd_mmc.c
+++ b/common/cmd_mmc.c
@@ -115,7 +115,7 @@
 	printf("Bus Width: %d-bit\n", mmc->bus_width);
 }
 
-int do_mmcinfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mmcinfo(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	struct mmc *mmc;
 
@@ -147,7 +147,7 @@
 	"- dislay info of the current MMC device"
 );
 
-int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mmcops(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	enum mmc_state state;
 
@@ -269,7 +269,7 @@
 			addr = (void *)simple_strtoul(argv[idx], NULL, 16);
 			++idx;
 		} else
-			addr = 0;
+			addr = NULL;
 		blk = simple_strtoul(argv[idx], NULL, 16);
 		cnt = simple_strtoul(argv[idx + 1], NULL, 16);
 
diff --git a/common/cmd_mp.c b/common/cmd_mp.c
index 4b27be4..2143814 100644
--- a/common/cmd_mp.c
+++ b/common/cmd_mp.c
@@ -23,7 +23,7 @@
 #include <common.h>
 #include <command.h>
 
-int
+static int
 cpu_cmd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	unsigned long cpuid;
@@ -61,8 +61,14 @@
 	return 0;
 }
 
+#ifdef CONFIG_SYS_LONGHELP
+static char cpu_help_text[] =
+	    "<num> reset                 - Reset cpu <num>\n"
+	"cpu <num> status                - Status of cpu <num>\n"
+	"cpu <num> disable               - Disable cpu <num>\n"
+	"cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]"
 #ifdef CONFIG_PPC
-#define CPU_ARCH_HELP \
+	"\n"
 	"                         [args] : <pir> <r3> <r6>\n" \
 	"                                   pir - processor id (if writeable)\n" \
 	"                                    r3 - value for gpr 3\n" \
@@ -74,16 +80,10 @@
 	"     When cpu <num> is released r4 and r5 = 0.\n" \
 	"     r7 will contain the size of the initial mapped area"
 #endif
+	"";
+#endif
 
 U_BOOT_CMD(
 	cpu, CONFIG_SYS_MAXARGS, 1, cpu_cmd,
-	"Multiprocessor CPU boot manipulation and release",
-	    "<num> reset                 - Reset cpu <num>\n"
-	"cpu <num> status                - Status of cpu <num>\n"
-	"cpu <num> disable               - Disable cpu <num>\n"
-	"cpu <num> release <addr> [args] - Release cpu <num> at <addr> with [args]"
-#ifdef CPU_ARCH_HELP
-	"\n"
-	CPU_ARCH_HELP
-#endif
+	"Multiprocessor CPU boot manipulation and release", cpu_help_text
 );
diff --git a/common/cmd_mtdparts.c b/common/cmd_mtdparts.c
index 2268829..06fc171 100644
--- a/common/cmd_mtdparts.c
+++ b/common/cmd_mtdparts.c
@@ -147,10 +147,10 @@
 extern void jffs2_free_cache(struct part_info *part);
 
 /* mtdids mapping list, filled by parse_ids() */
-struct list_head mtdids;
+static struct list_head mtdids;
 
 /* device/partition list, parse_cmdline() parses into here */
-struct list_head devices;
+static struct list_head devices;
 
 /* current active device and partition number */
 struct mtd_device *current_mtd_dev = NULL;
@@ -710,7 +710,7 @@
  * @param size a pointer to the size of the mtd device (output)
  * @return 0 if device is valid, 1 otherwise
  */
-int mtd_device_validate(u8 type, u8 num, u32 *size)
+static int mtd_device_validate(u8 type, u8 num, u32 *size)
 {
 	struct mtd_info *mtd = NULL;
 
@@ -1042,7 +1042,8 @@
  * @param dev_num parsed device number (output)
  * @return 0 on success, 1 otherwise
  */
-int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num)
+int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type,
+		 u8 *dev_num)
 {
 	const char *p = id;
 
@@ -1884,7 +1885,7 @@
  * @param argv arguments list
  * @return 0 on success, 1 otherwise
  */
-int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_chpart(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 /* command line only */
 	struct mtd_device *dev;
@@ -1922,7 +1923,8 @@
  * @param argv arguments list
  * @return 0 on success, 1 otherwise
  */
-int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_mtdparts(cmd_tbl_t *cmdtp, int flag, int argc,
+		       char * const argv[])
 {
 	if (argc == 2) {
 		if (strcmp(argv[1], "default") == 0) {
@@ -2046,9 +2048,8 @@
 	"    - change active partition (e.g. part-id = nand0,1)"
 );
 
-U_BOOT_CMD(
-	mtdparts,	6,	0,	do_mtdparts,
-	"define flash/nand partitions",
+#ifdef CONFIG_SYS_LONGHELP
+static char mtdparts_help_text[] =
 	"\n"
 	"    - list partition table\n"
 	"mtdparts delall\n"
@@ -2090,6 +2091,11 @@
 	"<size>     := standard linux memsize OR '-' to denote all remaining space\n"
 	"<offset>   := partition start offset within the device\n"
 	"<name>     := '(' NAME ')'\n"
-	"<ro-flag>  := when set to 'ro' makes partition read-only (not used, passed to kernel)"
+	"<ro-flag>  := when set to 'ro' makes partition read-only (not used, passed to kernel)";
+#endif
+
+U_BOOT_CMD(
+	mtdparts,	6,	0,	do_mtdparts,
+	"define flash/nand partitions", mtdparts_help_text
 );
 /***************************************************/
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index e24ed7f..4b16069 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -373,8 +373,7 @@
 {
 	nand_info_t *nand = &nand_info[idx];
 	struct nand_chip *chip = nand->priv;
-	const int bufsz = 32;
-	char buf[bufsz];
+	char buf[32];
 
 	printf("Device %d: ", idx);
 	if (chip->numchips > 1)
@@ -429,7 +428,7 @@
 	return ret;
 }
 
-int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_nand(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int i, ret = 0;
 	ulong addr;
@@ -781,9 +780,8 @@
 	return CMD_RET_USAGE;
 }
 
-U_BOOT_CMD(
-	nand, CONFIG_SYS_MAXARGS, 1, do_nand,
-	"NAND sub-system",
+#ifdef CONFIG_SYS_LONGHELP
+static char nand_help_text[] =
 	"info - show available NAND devices\n"
 	"nand device [dev] - show or set current device\n"
 	"nand read - addr off|partition size\n"
@@ -829,6 +827,12 @@
 	"nand env.oob set off|partition - set enviromnent offset\n"
 	"nand env.oob get - get environment offset"
 #endif
+	"";
+#endif
+
+U_BOOT_CMD(
+	nand, CONFIG_SYS_MAXARGS, 1, do_nand,
+	"NAND sub-system", nand_help_text
 );
 
 static int nand_load_image(cmd_tbl_t *cmdtp, nand_info_t *nand,
@@ -913,7 +917,8 @@
 	return bootm_maybe_autostart(cmdtp, cmd);
 }
 
-int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
+static int do_nandboot(cmd_tbl_t *cmdtp, int flag, int argc,
+		       char * const argv[])
 {
 	char *boot_device = NULL;
 	int idx;
diff --git a/common/cmd_net.c b/common/cmd_net.c
index a9ade8b..3b93ef2 100644
--- a/common/cmd_net.c
+++ b/common/cmd_net.c
@@ -30,9 +30,9 @@
 
 static int netboot_common(enum proto_t, cmd_tbl_t *, int, char * const []);
 
-int do_bootp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_bootp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	return netboot_common (BOOTP, cmdtp, argc, argv);
+	return netboot_common(BOOTP, cmdtp, argc, argv);
 }
 
 U_BOOT_CMD(
@@ -41,7 +41,7 @@
 	"[loadAddress] [[hostIPaddr:]bootfilename]"
 );
 
-int do_tftpb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int ret;
 
@@ -91,9 +91,9 @@
 
 
 #ifdef CONFIG_CMD_RARP
-int do_rarpb (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_rarpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
-	return netboot_common (RARP, cmdtp, argc, argv);
+	return netboot_common(RARP, cmdtp, argc, argv);
 }
 
 U_BOOT_CMD(
@@ -104,7 +104,7 @@
 #endif
 
 #if defined(CONFIG_CMD_DHCP)
-int do_dhcp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_dhcp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	return netboot_common(DHCP, cmdtp, argc, argv);
 }
@@ -117,7 +117,7 @@
 #endif
 
 #if defined(CONFIG_CMD_NFS)
-int do_nfs (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_nfs(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	return netboot_common(NFS, cmdtp, argc, argv);
 }
@@ -129,29 +129,29 @@
 );
 #endif
 
-static void netboot_update_env (void)
+static void netboot_update_env(void)
 {
 	char tmp[22];
 
 	if (NetOurGatewayIP) {
-		ip_to_string (NetOurGatewayIP, tmp);
-		setenv ("gatewayip", tmp);
+		ip_to_string(NetOurGatewayIP, tmp);
+		setenv("gatewayip", tmp);
 	}
 
 	if (NetOurSubnetMask) {
-		ip_to_string (NetOurSubnetMask, tmp);
-		setenv ("netmask", tmp);
+		ip_to_string(NetOurSubnetMask, tmp);
+		setenv("netmask", tmp);
 	}
 
 	if (NetOurHostName[0])
-		setenv ("hostname", NetOurHostName);
+		setenv("hostname", NetOurHostName);
 
 	if (NetOurRootPath[0])
-		setenv ("rootpath", NetOurRootPath);
+		setenv("rootpath", NetOurRootPath);
 
 	if (NetOurIP) {
-		ip_to_string (NetOurIP, tmp);
-		setenv ("ipaddr", tmp);
+		ip_to_string(NetOurIP, tmp);
+		setenv("ipaddr", tmp);
 	}
 #if !defined(CONFIG_BOOTP_SERVERIP)
 	/*
@@ -159,35 +159,35 @@
 	 * could have set it
 	 */
 	if (NetServerIP) {
-		ip_to_string (NetServerIP, tmp);
-		setenv ("serverip", tmp);
+		ip_to_string(NetServerIP, tmp);
+		setenv("serverip", tmp);
 	}
 #endif
 	if (NetOurDNSIP) {
-		ip_to_string (NetOurDNSIP, tmp);
-		setenv ("dnsip", tmp);
+		ip_to_string(NetOurDNSIP, tmp);
+		setenv("dnsip", tmp);
 	}
 #if defined(CONFIG_BOOTP_DNS2)
 	if (NetOurDNS2IP) {
-		ip_to_string (NetOurDNS2IP, tmp);
-		setenv ("dnsip2", tmp);
+		ip_to_string(NetOurDNS2IP, tmp);
+		setenv("dnsip2", tmp);
 	}
 #endif
 	if (NetOurNISDomain[0])
-		setenv ("domain", NetOurNISDomain);
+		setenv("domain", NetOurNISDomain);
 
 #if defined(CONFIG_CMD_SNTP) \
     && defined(CONFIG_BOOTP_TIMEOFFSET)
 	if (NetTimeOffset) {
-		sprintf (tmp, "%d", NetTimeOffset);
-		setenv ("timeoffset", tmp);
+		sprintf(tmp, "%d", NetTimeOffset);
+		setenv("timeoffset", tmp);
 	}
 #endif
 #if defined(CONFIG_CMD_SNTP) \
     && defined(CONFIG_BOOTP_NTPSERVER)
 	if (NetNtpServerIP) {
-		ip_to_string (NetNtpServerIP, tmp);
-		setenv ("ntpserverip", tmp);
+		ip_to_string(NetNtpServerIP, tmp);
+		setenv("ntpserverip", tmp);
 	}
 #endif
 }
@@ -224,7 +224,7 @@
 		break;
 
 	case 3:	load_addr = simple_strtoul(argv[1], NULL, 16);
-		copy_filename (BootFile, argv[2], sizeof(BootFile));
+		copy_filename(BootFile, argv[2], sizeof(BootFile));
 
 		break;
 
@@ -274,7 +274,7 @@
 }
 
 #if defined(CONFIG_CMD_PING)
-int do_ping (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_ping(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	if (argc < 2)
 		return -1;
@@ -322,7 +322,7 @@
 
 }
 
-int do_cdp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_cdp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int r;
 
@@ -345,27 +345,29 @@
 #endif
 
 #if defined(CONFIG_CMD_SNTP)
-int do_sntp (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+int do_sntp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	char *toff;
 
 	if (argc < 2) {
-		NetNtpServerIP = getenv_IPaddr ("ntpserverip");
+		NetNtpServerIP = getenv_IPaddr("ntpserverip");
 		if (NetNtpServerIP == 0) {
-			printf ("ntpserverip not set\n");
+			printf("ntpserverip not set\n");
 			return (1);
 		}
 	} else {
 		NetNtpServerIP = string_to_ip(argv[1]);
 		if (NetNtpServerIP == 0) {
-			printf ("Bad NTP server IP address\n");
+			printf("Bad NTP server IP address\n");
 			return (1);
 		}
 	}
 
-	toff = getenv ("timeoffset");
-	if (toff == NULL) NetTimeOffset = 0;
-	else NetTimeOffset = simple_strtol (toff, NULL, 10);
+	toff = getenv("timeoffset");
+	if (toff == NULL)
+		NetTimeOffset = 0;
+	else
+		NetTimeOffset = simple_strtol(toff, NULL, 10);
 
 	if (NetLoop(SNTP) < 0) {
 		printf("SNTP failed: host %pI4 not responding\n",
diff --git a/common/cmd_nvedit.c b/common/cmd_nvedit.c
index 1f9c674..006131f 100644
--- a/common/cmd_nvedit.c
+++ b/common/cmd_nvedit.c
@@ -136,7 +136,8 @@
 	return 0;
 }
 
-int do_env_print (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_print(cmd_tbl_t *cmdtp, int flag, int argc,
+			char * const argv[])
 {
 	int i;
 	int rcode = 0;
@@ -238,9 +239,6 @@
 		/* Try assigning specified device */
 		if (console_assign(console, newval) < 0)
 			return 1;
-
-		if (serial_assign(newval) < 0)
-			return 1;
 #endif /* CONFIG_CONSOLE_MUX */
 	}
 
@@ -325,7 +323,7 @@
  * Set a new environment variable,
  * or replace or delete an existing one.
 */
-int _do_env_set(int flag, int argc, char * const argv[])
+static int _do_env_set(int flag, int argc, char * const argv[])
 {
 	int   i, len;
 	char  *name, *value, *s;
@@ -438,7 +436,7 @@
 }
 
 #ifndef CONFIG_SPL_BUILD
-int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_set(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	if (argc < 2)
 		return CMD_RET_USAGE;
@@ -517,7 +515,8 @@
  * Interactively edit an environment variable
  */
 #if defined(CONFIG_CMD_EDITENV)
-int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_edit(cmd_tbl_t *cmdtp, int flag, int argc,
+		       char * const argv[])
 {
 	char buffer[CONFIG_SYS_CBSIZE];
 	char *init_val;
@@ -625,7 +624,8 @@
 
 #ifndef CONFIG_SPL_BUILD
 #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
-int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_env_save(cmd_tbl_t *cmdtp, int flag, int argc,
+		       char * const argv[])
 {
 	printf("Saving Environment to %s...\n", env_name_spec);
 
@@ -1023,9 +1023,8 @@
 	return CMD_RET_USAGE;
 }
 
-U_BOOT_CMD(
-	env, CONFIG_SYS_MAXARGS, 1, do_env,
-	"environment handling commands",
+#ifdef CONFIG_SYS_LONGHELP
+static char env_help_text[] =
 #if defined(CONFIG_CMD_ASKENV)
 	"ask name [message] [size] - ask for environment variable\nenv "
 #endif
@@ -1050,7 +1049,12 @@
 #if defined(CONFIG_CMD_SAVEENV) && !defined(CONFIG_ENV_IS_NOWHERE)
 	"env save - save environment\n"
 #endif
-	"env set [-f] name [arg ...]\n"
+	"env set [-f] name [arg ...]\n";
+#endif
+
+U_BOOT_CMD(
+	env, CONFIG_SYS_MAXARGS, 1, do_env,
+	"environment handling commands", env_help_text
 );
 
 /*
diff --git a/common/cmd_pci.c b/common/cmd_pci.c
index a1fe519..8550b64 100644
--- a/common/cmd_pci.c
+++ b/common/cmd_pci.c
@@ -35,8 +35,6 @@
 #include <asm/io.h>
 #include <pci.h>
 
-unsigned char	ShortPCIListing = 1;
-
 /*
  * Follows routines for the output of infos about devices on PCI bus.
  */
@@ -408,7 +406,7 @@
  *      pci modify[.b, .w, .l] bus.device.function [addr]
  *      pci write[.b, .w, .l] bus.device.function addr value
  */
-int do_pci (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_pci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong addr = 0, value = 0, size = 0;
 	pci_dev_t bdf = 0;
@@ -485,10 +483,8 @@
 
 /***************************************************/
 
-
-U_BOOT_CMD(
-	pci,	5,	1,	do_pci,
-	"list and access PCI Configuration Space",
+#ifdef CONFIG_SYS_LONGHELP
+static char pci_help_text[] =
 	"[bus] [long]\n"
 	"    - short or long list of PCI devices on bus 'bus'\n"
 #ifdef CONFIG_CMD_PCI_ENUM
@@ -504,5 +500,10 @@
 	"pci modify[.b, .w, .l] b.d.f address\n"
 	"    -  modify, auto increment CFG address\n"
 	"pci write[.b, .w, .l] b.d.f address value\n"
-	"    - write to CFG address"
+	"    - write to CFG address";
+#endif
+
+U_BOOT_CMD(
+	pci,	5,	1,	do_pci,
+	"list and access PCI Configuration Space", pci_help_text
 );
diff --git a/common/cmd_reginfo.c b/common/cmd_reginfo.c
index 908876c..08a6563 100644
--- a/common/cmd_reginfo.c
+++ b/common/cmd_reginfo.c
@@ -37,7 +37,8 @@
 extern void mpc85xx_reginfo(void);
 #endif
 
-int do_reginfo (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_reginfo(cmd_tbl_t *cmdtp, int flag, int argc,
+		       char * const argv[])
 {
 #if defined(CONFIG_8xx)
 	volatile immap_t     *immap  = (immap_t *)CONFIG_SYS_IMMR;
diff --git a/common/cmd_sata.c b/common/cmd_sata.c
index 3f98235..b401bd1 100644
--- a/common/cmd_sata.c
+++ b/common/cmd_sata.c
@@ -28,7 +28,7 @@
 #include <part.h>
 #include <sata.h>
 
-int sata_curr_device = -1;
+static int sata_curr_device = -1;
 block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE];
 
 int __sata_initialize(void)
@@ -67,7 +67,7 @@
 }
 #endif
 
-int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_sata(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	int rc = 0;
 
diff --git a/common/cmd_scsi.c b/common/cmd_scsi.c
index 22d0119..266bfa6 100644
--- a/common/cmd_scsi.c
+++ b/common/cmd_scsi.c
@@ -34,6 +34,9 @@
 #include <image.h>
 #include <pci.h>
 
+#ifdef CONFIG_SCSI_DEV_LIST
+#define SCSI_DEV_LIST CONFIG_SCSI_DEV_LIST
+#else
 #ifdef CONFIG_SCSI_SYM53C8XX
 #define SCSI_VEND_ID	0x1000
 #ifndef CONFIG_SCSI_DEV_ID
@@ -49,8 +52,12 @@
 #elif !defined(CONFIG_SCSI_AHCI_PLAT)
 #error no scsi device defined
 #endif
+#define SCSI_DEV_LIST {SCSI_VEND_ID, SCSI_DEV_ID}
+#endif
 
-
+#ifdef CONFIG_PCI
+const struct pci_device_id scsi_device_list[] = { SCSI_DEV_LIST };
+#endif
 static ccb tempccb;	/* temporary scsi command buffer */
 
 static unsigned char tempbuff[512]; /* temporary data buffer */
@@ -65,14 +72,19 @@
  *  forward declerations of some Setup Routines
  */
 void scsi_setup_test_unit_ready(ccb * pccb);
-void scsi_setup_read_capacity(ccb * pccb);
 void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks);
 void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks);
+static void scsi_setup_write_ext(ccb *pccb, unsigned long start,
+			  unsigned short blocks);
 void scsi_setup_inquiry(ccb * pccb);
 void scsi_ident_cpy (unsigned char *dest, unsigned char *src, unsigned int len);
 
 
-ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer);
+static int scsi_read_capacity(ccb *pccb, lbaint_t *capacity,
+			      unsigned long *blksz);
+static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer);
+static ulong scsi_write(int device, ulong blknr,
+			lbaint_t blkcnt, const void *buffer);
 
 
 /*********************************************************************************
@@ -82,7 +94,8 @@
 void scsi_scan(int mode)
 {
 	unsigned char i,perq,modi,lun;
-	unsigned long capacity,blksz;
+	lbaint_t capacity;
+	unsigned long blksz;
 	ccb* pccb=(ccb *)&tempccb;
 
 	if(mode==1) {
@@ -102,6 +115,7 @@
 		scsi_dev_desc[i].dev=i;
 		scsi_dev_desc[i].part_type=PART_TYPE_UNKNOWN;
 		scsi_dev_desc[i].block_read=scsi_read;
+		scsi_dev_desc[i].block_write = scsi_write;
 	}
 	scsi_max_devs=0;
 	for(i=0;i<CONFIG_SYS_SCSI_MAX_SCSI_ID;i++) {
@@ -146,16 +160,10 @@
 				scsi_print_error(pccb);
 				continue;
 			}
-			pccb->datalen=8;
-			scsi_setup_read_capacity(pccb);
-			if(scsi_exec(pccb)!=TRUE) {
+			if (scsi_read_capacity(pccb, &capacity, &blksz)) {
 				scsi_print_error(pccb);
 				continue;
 			}
-			capacity=((unsigned long)tempbuff[0]<<24)|((unsigned long)tempbuff[1]<<16)|
-					((unsigned long)tempbuff[2]<<8)|((unsigned long)tempbuff[3]);
-			blksz=((unsigned long)tempbuff[4]<<24)|((unsigned long)tempbuff[5]<<16)|
-				((unsigned long)tempbuff[6]<<8)|((unsigned long)tempbuff[7]);
 			scsi_dev_desc[scsi_max_devs].lba=capacity;
 			scsi_dev_desc[scsi_max_devs].blksz=blksz;
 			scsi_dev_desc[scsi_max_devs].type=perq;
@@ -172,21 +180,52 @@
 		scsi_curr_dev=0;
 	else
 		scsi_curr_dev = -1;
+
+	printf("Found %d device(s).\n", scsi_max_devs);
+	setenv_ulong("scsidevs", scsi_max_devs);
+}
+
+int scsi_get_disk_count(void)
+{
+	return scsi_max_devs;
 }
 
 #ifdef CONFIG_PCI
 void scsi_init(void)
 {
 	int busdevfunc;
+	int i;
+	/*
+	 * Find a device from the list, this driver will support a single
+	 * controller.
+	 */
+	for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
+		/* get PCI Device ID */
+		busdevfunc = pci_find_device(scsi_device_list[i].vendor,
+					     scsi_device_list[i].device,
+					     0);
+		if (busdevfunc != -1)
+			break;
+	}
 
-	busdevfunc=pci_find_device(SCSI_VEND_ID,SCSI_DEV_ID,0); /* get PCI Device ID */
-	if(busdevfunc==-1) {
-		printf("Error SCSI Controller (%04X,%04X) not found\n",SCSI_VEND_ID,SCSI_DEV_ID);
+	if (busdevfunc == -1) {
+		printf("Error: SCSI Controller(s) ");
+		for (i = 0; i < ARRAY_SIZE(scsi_device_list); i++) {
+			printf("%04X:%04X ",
+			       scsi_device_list[i].vendor,
+			       scsi_device_list[i].device);
+		}
+		printf("not found\n");
 		return;
 	}
 #ifdef DEBUG
 	else {
-		printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",SCSI_VEND_ID,SCSI_DEV_ID,(busdevfunc>>16)&0xFF,(busdevfunc>>11)&0x1F,(busdevfunc>>8)&0x7);
+		printf("SCSI Controller (%04X,%04X) found (%d:%d:%d)\n",
+		       scsi_device_list[i].vendor,
+		       scsi_device_list[i].device,
+		       (busdevfunc >> 16) & 0xFF,
+		       (busdevfunc >> 11) & 0x1F,
+		       (busdevfunc >> 8) & 0x7);
 	}
 #endif
 	scsi_low_level_init(busdevfunc);
@@ -305,6 +344,19 @@
 				n = scsi_read(scsi_curr_dev, blk, cnt, (ulong *)addr);
 				printf ("%ld blocks read: %s\n",n,(n==cnt) ? "OK" : "ERROR");
 				return 0;
+			} else if (strcmp(argv[1], "write") == 0) {
+				ulong addr = simple_strtoul(argv[2], NULL, 16);
+				ulong blk = simple_strtoul(argv[3], NULL, 16);
+				ulong cnt = simple_strtoul(argv[4], NULL, 16);
+				ulong n;
+				printf("\nSCSI write: device %d block # %ld, "
+				       "count %ld ... ",
+				       scsi_curr_dev, blk, cnt);
+				n = scsi_write(scsi_curr_dev, blk, cnt,
+					       (ulong *)addr);
+				printf("%ld blocks written: %s\n", n,
+				       (n == cnt) ? "OK" : "ERROR");
+				return 0;
 			}
 	} /* switch */
 	return CMD_RET_USAGE;
@@ -316,9 +368,10 @@
 
 #define SCSI_MAX_READ_BLK 0xFFFF /* almost the maximum amount of the scsi_ext command.. */
 
-ulong scsi_read(int device, ulong blknr, ulong blkcnt, void *buffer)
+static ulong scsi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
 {
-	ulong start,blks, buf_addr;
+	lbaint_t start, blks;
+	uintptr_t buf_addr;
 	unsigned short smallblks;
 	ccb* pccb=(ccb *)&tempccb;
 	device&=0xff;
@@ -329,7 +382,9 @@
 	buf_addr=(unsigned long)buffer;
 	start=blknr;
 	blks=blkcnt;
-	debug ("\nscsi_read: dev %d startblk %lx, blccnt %lx buffer %lx\n",device,start,blks,(unsigned long)buffer);
+	debug("\nscsi_read: dev %d startblk " LBAF
+	      ", blccnt " LBAF " buffer %lx\n",
+	      device, start, blks, (unsigned long)buffer);
 	do {
 		pccb->pdata=(unsigned char *)buf_addr;
 		if(blks>SCSI_MAX_READ_BLK) {
@@ -346,7 +401,9 @@
 			start+=blks;
 			blks=0;
 		}
-		debug ("scsi_read_ext: startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr);
+		debug("scsi_read_ext: startblk " LBAF
+		      ", blccnt %x buffer %lx\n",
+		      start, smallblks, buf_addr);
 		if(scsi_exec(pccb)!=TRUE) {
 			scsi_print_error(pccb);
 			blkcnt-=blks;
@@ -354,10 +411,65 @@
 		}
 		buf_addr+=pccb->datalen;
 	} while(blks!=0);
-	debug ("scsi_read_ext: end startblk %lx, blccnt %x buffer %lx\n",start,smallblks,buf_addr);
+	debug("scsi_read_ext: end startblk " LBAF
+	      ", blccnt %x buffer %lx\n", start, smallblks, buf_addr);
 	return(blkcnt);
 }
 
+/*******************************************************************************
+ * scsi_write
+ */
+
+/* Almost the maximum amount of the scsi_ext command.. */
+#define SCSI_MAX_WRITE_BLK 0xFFFF
+
+static ulong scsi_write(int device, ulong blknr,
+			lbaint_t blkcnt, const void *buffer)
+{
+	lbaint_t start, blks;
+	uintptr_t buf_addr;
+	unsigned short smallblks;
+	ccb* pccb = (ccb *)&tempccb;
+	device &= 0xff;
+	/* Setup  device
+	 */
+	pccb->target = scsi_dev_desc[device].target;
+	pccb->lun = scsi_dev_desc[device].lun;
+	buf_addr = (unsigned long)buffer;
+	start = blknr;
+	blks = blkcnt;
+	debug("\n%s: dev %d startblk " LBAF ", blccnt " LBAF " buffer %lx\n",
+	      __func__, device, start, blks, (unsigned long)buffer);
+	do {
+		pccb->pdata = (unsigned char *)buf_addr;
+		if (blks > SCSI_MAX_WRITE_BLK) {
+			pccb->datalen = (scsi_dev_desc[device].blksz *
+					 SCSI_MAX_WRITE_BLK);
+			smallblks = SCSI_MAX_WRITE_BLK;
+			scsi_setup_write_ext(pccb, start, smallblks);
+			start += SCSI_MAX_WRITE_BLK;
+			blks -= SCSI_MAX_WRITE_BLK;
+		} else {
+			pccb->datalen = scsi_dev_desc[device].blksz * blks;
+			smallblks = (unsigned short)blks;
+			scsi_setup_write_ext(pccb, start, smallblks);
+			start += blks;
+			blks = 0;
+		}
+		debug("%s: startblk " LBAF ", blccnt %x buffer %lx\n",
+		      __func__, start, smallblks, buf_addr);
+		if (scsi_exec(pccb) != TRUE) {
+			scsi_print_error(pccb);
+			blkcnt -= blks;
+			break;
+		}
+		buf_addr += pccb->datalen;
+	} while (blks != 0);
+	debug("%s: end startblk " LBAF ", blccnt %x buffer %lx\n",
+	      __func__, start, smallblks, buf_addr);
+	return blkcnt;
+}
+
 /* copy src to dest, skipping leading and trailing blanks
  * and null terminate the string
  */
@@ -398,6 +510,67 @@
 	}
 }
 
+int scsi_read_capacity(ccb *pccb, lbaint_t *capacity, unsigned long *blksz)
+{
+	*capacity = 0;
+
+	memset(pccb->cmd, 0, sizeof(pccb->cmd));
+	pccb->cmd[0] = SCSI_RD_CAPAC10;
+	pccb->cmd[1] = pccb->lun << 5;
+	pccb->cmdlen = 10;
+	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+
+	pccb->datalen = 8;
+	if (scsi_exec(pccb) != TRUE)
+		return 1;
+
+	*capacity = ((lbaint_t)pccb->pdata[0] << 24) |
+		    ((lbaint_t)pccb->pdata[1] << 16) |
+		    ((lbaint_t)pccb->pdata[2] << 8)  |
+		    ((lbaint_t)pccb->pdata[3]);
+
+	if (*capacity != 0xffffffff) {
+		/* Read capacity (10) was sufficient for this drive. */
+		*blksz = ((unsigned long)pccb->pdata[4] << 24) |
+			 ((unsigned long)pccb->pdata[5] << 16) |
+			 ((unsigned long)pccb->pdata[6] << 8)  |
+			 ((unsigned long)pccb->pdata[7]);
+		return 0;
+	}
+
+	/* Read capacity (10) was insufficient. Use read capacity (16). */
+
+	memset(pccb->cmd, 0, sizeof(pccb->cmd));
+	pccb->cmd[0] = SCSI_RD_CAPAC16;
+	pccb->cmd[1] = 0x10;
+	pccb->cmdlen = 16;
+	pccb->msgout[0] = SCSI_IDENTIFY; /* NOT USED */
+
+	pccb->datalen = 16;
+	if (scsi_exec(pccb) != TRUE)
+		return 1;
+
+	*capacity = ((uint64_t)pccb->pdata[0] << 56) |
+		    ((uint64_t)pccb->pdata[1] << 48) |
+		    ((uint64_t)pccb->pdata[2] << 40) |
+		    ((uint64_t)pccb->pdata[3] << 32) |
+		    ((uint64_t)pccb->pdata[4] << 24) |
+		    ((uint64_t)pccb->pdata[5] << 16) |
+		    ((uint64_t)pccb->pdata[6] << 8)  |
+		    ((uint64_t)pccb->pdata[7]);
+
+	*blksz = ((uint64_t)pccb->pdata[8]  << 56) |
+		 ((uint64_t)pccb->pdata[9]  << 48) |
+		 ((uint64_t)pccb->pdata[10] << 40) |
+		 ((uint64_t)pccb->pdata[11] << 32) |
+		 ((uint64_t)pccb->pdata[12] << 24) |
+		 ((uint64_t)pccb->pdata[13] << 16) |
+		 ((uint64_t)pccb->pdata[14] << 8)  |
+		 ((uint64_t)pccb->pdata[15]);
+
+	return 0;
+}
+
 
 /************************************************************************************
  * Some setup (fill-in) routines
@@ -414,23 +587,6 @@
 	pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */
 }
 
-void scsi_setup_read_capacity(ccb * pccb)
-{
-	pccb->cmd[0]=SCSI_RD_CAPAC;
-	pccb->cmd[1]=pccb->lun<<5;
-	pccb->cmd[2]=0;
-	pccb->cmd[3]=0;
-	pccb->cmd[4]=0;
-	pccb->cmd[5]=0;
-	pccb->cmd[6]=0;
-	pccb->cmd[7]=0;
-	pccb->cmd[8]=0;
-	pccb->cmd[9]=0;
-	pccb->cmdlen=10;
-	pccb->msgout[0]=SCSI_IDENTIFY; /* NOT USED */
-
-}
-
 void scsi_setup_read_ext(ccb * pccb, unsigned long start, unsigned short blocks)
 {
 	pccb->cmd[0]=SCSI_READ10;
@@ -451,6 +607,27 @@
 		pccb->cmd[7],pccb->cmd[8]);
 }
 
+void scsi_setup_write_ext(ccb *pccb, unsigned long start, unsigned short blocks)
+{
+	pccb->cmd[0] = SCSI_WRITE10;
+	pccb->cmd[1] = pccb->lun << 5;
+	pccb->cmd[2] = ((unsigned char) (start>>24)) & 0xff;
+	pccb->cmd[3] = ((unsigned char) (start>>16)) & 0xff;
+	pccb->cmd[4] = ((unsigned char) (start>>8)) & 0xff;
+	pccb->cmd[5] = ((unsigned char) (start)) & 0xff;
+	pccb->cmd[6] = 0;
+	pccb->cmd[7] = ((unsigned char) (blocks>>8)) & 0xff;
+	pccb->cmd[8] = (unsigned char)blocks & 0xff;
+	pccb->cmd[9] = 0;
+	pccb->cmdlen = 10;
+	pccb->msgout[0] = SCSI_IDENTIFY;  /* NOT USED */
+	debug("%s: cmd: %02X %02X startblk %02X%02X%02X%02X blccnt %02X%02X\n",
+	      __func__,
+	      pccb->cmd[0], pccb->cmd[1],
+	      pccb->cmd[2], pccb->cmd[3], pccb->cmd[4], pccb->cmd[5],
+	      pccb->cmd[7], pccb->cmd[8]);
+}
+
 void scsi_setup_read6(ccb * pccb, unsigned long start, unsigned short blocks)
 {
 	pccb->cmd[0]=SCSI_READ6;
@@ -492,7 +669,9 @@
 	"scsi device [dev] - show or set current device\n"
 	"scsi part [dev] - print partition table of one or all SCSI devices\n"
 	"scsi read addr blk# cnt - read `cnt' blocks starting at block `blk#'\n"
-	"     to memory address `addr'"
+	"     to memory address `addr'\n"
+	"scsi write addr blk# cnt - write `cnt' blocks starting at block\n"
+	"     `blk#' from memory address `addr'"
 );
 
 U_BOOT_CMD(
diff --git a/common/cmd_setexpr.c b/common/cmd_setexpr.c
index 1b3edb7..7b140de 100644
--- a/common/cmd_setexpr.c
+++ b/common/cmd_setexpr.c
@@ -50,7 +50,7 @@
 	}
 }
 
-int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_setexpr(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong a, b;
 	char buf[16];
diff --git a/common/cmd_source.c b/common/cmd_source.c
index c4cde98..02a862c 100644
--- a/common/cmd_source.c
+++ b/common/cmd_source.c
@@ -177,9 +177,8 @@
 	return rcode;
 }
 
-U_BOOT_CMD(
-	source, 2, 0,	do_source,
-	"run script from memory",
+#ifdef CONFIG_SYS_LONGHELP
+static char source_help_text[] =
 	"[addr]\n"
 	"\t- run script starting at addr\n"
 	"\t- A valid image header must be present"
@@ -188,5 +187,11 @@
 	"For FIT format uImage addr must include subimage\n"
 	"unit name in the form of addr:<subimg_uname>"
 #endif
+	"";
+#endif
+
+U_BOOT_CMD(
+	source, 2, 0,	do_source,
+	"run script from memory", source_help_text
 );
 #endif
diff --git a/common/cmd_test.c b/common/cmd_test.c
index 6da06b9..d4ec186 100644
--- a/common/cmd_test.c
+++ b/common/cmd_test.c
@@ -24,7 +24,7 @@
 #include <common.h>
 #include <command.h>
 
-int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_test(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	char * const *ap;
 	int left, adv, expr, last_expr, neg, last_cmp;
@@ -150,7 +150,7 @@
 	"[args..]"
 );
 
-int do_false(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_false(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	return 1;
 }
@@ -161,7 +161,7 @@
 	NULL
 );
 
-int do_true(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_true(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	return 0;
 }
diff --git a/common/cmd_usb.c b/common/cmd_usb.c
index c128455..8ad0b23 100644
--- a/common/cmd_usb.c
+++ b/common/cmd_usb.c
@@ -40,7 +40,7 @@
 #endif
 
 /* some display routines (info command) */
-char *usb_get_class_desc(unsigned char dclass)
+static char *usb_get_class_desc(unsigned char dclass)
 {
 	switch (dclass) {
 	case USB_CLASS_PER_INTERFACE:
@@ -66,8 +66,8 @@
 	}
 }
 
-void usb_display_class_sub(unsigned char dclass, unsigned char subclass,
-			   unsigned char proto)
+static void usb_display_class_sub(unsigned char dclass, unsigned char subclass,
+				  unsigned char proto)
 {
 	switch (dclass) {
 	case USB_CLASS_PER_INTERFACE:
@@ -148,7 +148,7 @@
 	}
 }
 
-void usb_display_string(struct usb_device *dev, int index)
+static void usb_display_string(struct usb_device *dev, int index)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(char, buffer, 256);
 
@@ -158,7 +158,7 @@
 	}
 }
 
-void usb_display_desc(struct usb_device *dev)
+static void usb_display_desc(struct usb_device *dev)
 {
 	if (dev->descriptor.bDescriptorType == USB_DT_DEVICE) {
 		printf("%d: %s,  USB Revision %x.%x\n", dev->devnum,
@@ -192,8 +192,8 @@
 
 }
 
-void usb_display_conf_desc(struct usb_configuration_descriptor *config,
-			   struct usb_device *dev)
+static void usb_display_conf_desc(struct usb_configuration_descriptor *config,
+				  struct usb_device *dev)
 {
 	printf("   Configuration: %d\n", config->bConfigurationValue);
 	printf("   - Interfaces: %d %s%s%dmA\n", config->bNumInterfaces,
@@ -207,8 +207,8 @@
 	}
 }
 
-void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,
-			 struct usb_device *dev)
+static void usb_display_if_desc(struct usb_interface_descriptor *ifdesc,
+				struct usb_device *dev)
 {
 	printf("     Interface: %d\n", ifdesc->bInterfaceNumber);
 	printf("     - Alternate Setting %d, Endpoints: %d\n",
@@ -224,7 +224,7 @@
 	}
 }
 
-void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc)
+static void usb_display_ep_desc(struct usb_endpoint_descriptor *epdesc)
 {
 	printf("     - Endpoint %d %s ", epdesc->bEndpointAddress & 0xf,
 		(epdesc->bEndpointAddress & 0x80) ? "In" : "Out");
@@ -249,7 +249,7 @@
 }
 
 /* main routine to diasplay the configs, interfaces and endpoints */
-void usb_display_config(struct usb_device *dev)
+static void usb_display_config(struct usb_device *dev)
 {
 	struct usb_config *config;
 	struct usb_interface *ifdesc;
@@ -280,7 +280,7 @@
 }
 
 /* shows the device tree recursively */
-void usb_show_tree_graph(struct usb_device *dev, char *pre)
+static void usb_show_tree_graph(struct usb_device *dev, char *pre)
 {
 	int i, index;
 	int has_child, last_child;
@@ -340,7 +340,7 @@
 }
 
 /* main routine for the tree command */
-void usb_show_tree(struct usb_device *dev)
+static void usb_show_tree(struct usb_device *dev)
 {
 	char preamble[32];
 
@@ -353,7 +353,7 @@
  * usb boot command intepreter. Derived from diskboot
  */
 #ifdef CONFIG_USB_STORAGE
-int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_usbboot(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	return common_diskboot(cmdtp, "usb", argc, argv);
 }
@@ -363,7 +363,7 @@
 /******************************************************************************
  * usb command intepreter
  */
-int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_usb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 
 	int i;
diff --git a/common/cmd_version.c b/common/cmd_version.c
index e4b2ac1..ab4c560 100644
--- a/common/cmd_version.c
+++ b/common/cmd_version.c
@@ -28,7 +28,7 @@
 
 const char __weak version_string[] = U_BOOT_VERSION_STRING;
 
-int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_version(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	printf("\n%s\n", version_string);
 #ifdef CC_VERSION_STRING
diff --git a/common/cmd_ximg.c b/common/cmd_ximg.c
index 0414589..42a7eba 100644
--- a/common/cmd_ximg.c
+++ b/common/cmd_ximg.c
@@ -42,7 +42,7 @@
 #define CONFIG_SYS_XIMG_LEN	0x800000
 #endif
 
-int
+static int
 do_imgextract(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
 {
 	ulong		addr = load_addr;
@@ -264,9 +264,8 @@
 	return 0;
 }
 
-U_BOOT_CMD(
-	imxtract, 4, 1, do_imgextract,
-	"extract a part of a multi-image",
+#ifdef CONFIG_SYS_LONGHELP
+static char imgextract_help_text[] =
 	"addr part [dest]\n"
 	"    - extract <part> from legacy image at <addr> and copy to <dest>"
 #if defined(CONFIG_FIT)
@@ -274,4 +273,10 @@
 	"addr uname [dest]\n"
 	"    - extract <uname> subimage from FIT image at <addr> and copy to <dest>"
 #endif
+	"";
+#endif
+
+U_BOOT_CMD(
+	imxtract, 4, 1, do_imgextract,
+	"extract a part of a multi-image", imgextract_help_text
 );
diff --git a/common/cmd_zfs.c b/common/cmd_zfs.c
index d580f7b..1df0c4d 100644
--- a/common/cmd_zfs.c
+++ b/common/cmd_zfs.c
@@ -46,7 +46,7 @@
 #define DOS_FS_TYPE_OFFSET	0x36
 #define DOS_FS32_TYPE_OFFSET	0x52
 
-static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_zfs_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	char *filename = NULL;
 	int dev;
@@ -146,7 +146,7 @@
 
 
 
-static int do_zfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+static int do_zfs_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	const char *filename = "/";
 	int part;
diff --git a/common/command.c b/common/command.c
index aa0fb0a..50c8429 100644
--- a/common/command.c
+++ b/common/command.c
@@ -137,8 +137,9 @@
 
 cmd_tbl_t *find_cmd (const char *cmd)
 {
-	int len = &__u_boot_cmd_end - &__u_boot_cmd_start;
-	return find_cmd_tbl(cmd, &__u_boot_cmd_start, len);
+	cmd_tbl_t *start = ll_entry_start(cmd_tbl_t, cmd);
+	const int len = ll_entry_count(cmd_tbl_t, cmd);
+	return find_cmd_tbl(cmd, start, len);
 }
 
 int cmd_usage(const cmd_tbl_t *cmdtp)
@@ -181,7 +182,9 @@
 
 static int complete_cmdv(int argc, char * const argv[], char last_char, int maxv, char *cmdv[])
 {
-	cmd_tbl_t *cmdtp;
+	cmd_tbl_t *cmdtp = ll_entry_start(cmd_tbl_t, cmd);
+	const int count = ll_entry_count(cmd_tbl_t, cmd);
+	const cmd_tbl_t *cmdend = cmdtp + count;
 	const char *p;
 	int len, clen;
 	int n_found = 0;
@@ -195,12 +198,12 @@
 
 	if (argc == 0) {
 		/* output full list of commands */
-		for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) {
+		for (; cmdtp != cmdend; cmdtp++) {
 			if (n_found >= maxv - 2) {
-				cmdv[n_found++] = "...";
+				cmdv[n_found] = "...";
 				break;
 			}
-			cmdv[n_found++] = cmdtp->name;
+			cmdv[n_found] = cmdtp->name;
 		}
 		cmdv[n_found] = NULL;
 		return n_found;
@@ -228,7 +231,7 @@
 		len = p - cmd;
 
 	/* return the partial matches */
-	for (cmdtp = &__u_boot_cmd_start; cmdtp != &__u_boot_cmd_end; cmdtp++) {
+	for (; cmdtp != cmdend; cmdtp++) {
 
 		clen = strlen(cmdtp->name);
 		if (clen < len)
diff --git a/common/dlmalloc.c b/common/dlmalloc.c
index 1d7e527..b2f0a1a 100644
--- a/common/dlmalloc.c
+++ b/common/dlmalloc.c
@@ -1465,7 +1465,7 @@
 #define IAV(i)  bin_at(i), bin_at(i)
 
 static mbinptr av_[NAV * 2 + 2] = {
- 0, 0,
+ NULL, NULL,
  IAV(0),   IAV(1),   IAV(2),   IAV(3),   IAV(4),   IAV(5),   IAV(6),   IAV(7),
  IAV(8),   IAV(9),   IAV(10),  IAV(11),  IAV(12),  IAV(13),  IAV(14),  IAV(15),
  IAV(16),  IAV(17),  IAV(18),  IAV(19),  IAV(20),  IAV(21),  IAV(22),  IAV(23),
@@ -2173,10 +2173,10 @@
   /* check if mem_malloc_init() was run */
   if ((mem_malloc_start == 0) && (mem_malloc_end == 0)) {
     /* not initialized yet */
-    return 0;
+    return NULL;
   }
 
-  if ((long)bytes < 0) return 0;
+  if ((long)bytes < 0) return NULL;
 
   nb = request2size(bytes);  /* padded request size; */
 
@@ -2379,7 +2379,7 @@
     /* Try to extend */
     malloc_extend_top(nb);
     if ( (remainder_size = chunksize(top) - nb) < (long)MINSIZE)
-      return 0; /* propagate failure */
+      return NULL; /* propagate failure */
   }
 
   victim = top;
@@ -2433,7 +2433,7 @@
   mchunkptr fwd;       /* misc temp for linking */
   int       islr;      /* track whether merging with last_remainder */
 
-  if (mem == 0)                              /* free(0) has no effect */
+  if (mem == NULL)                              /* free(0) has no effect */
     return;
 
   p = mem2chunk(mem);
@@ -2579,10 +2579,10 @@
   if (bytes == 0) { fREe(oldmem); return 0; }
 #endif
 
-  if ((long)bytes < 0) return 0;
+  if ((long)bytes < 0) return NULL;
 
   /* realloc of null is supposed to be same as malloc */
-  if (oldmem == 0) return mALLOc(bytes);
+  if (oldmem == NULL) return mALLOc(bytes);
 
   newp    = oldp    = mem2chunk(oldmem);
   newsize = oldsize = chunksize(oldp);
@@ -2643,7 +2643,7 @@
     }
     else
     {
-      next = 0;
+      next = NULL;
       nextsize = 0;
     }
 
@@ -2656,7 +2656,7 @@
 
       /* try forward + backward first to save a later consolidation */
 
-      if (next != 0)
+      if (next != NULL)
       {
 	/* into top */
 	if (next == top)
@@ -2689,7 +2689,7 @@
       }
 
       /* backward only */
-      if (prev != 0 && (long)(prevsize + newsize) >= (long)nb)
+      if (prev != NULL && (long)(prevsize + newsize) >= (long)nb)
       {
 	unlink(prev, bck, fwd);
 	newp = prev;
@@ -2704,8 +2704,8 @@
 
     newmem = mALLOc (bytes);
 
-    if (newmem == 0)  /* propagate failure */
-      return 0;
+    if (newmem == NULL)  /* propagate failure */
+      return NULL;
 
     /* Avoid copy if newp is next chunk after oldp. */
     /* (This can only happen when new chunk is sbrk'ed.) */
@@ -2783,7 +2783,7 @@
   mchunkptr remainder;        /* spare room at end to split off */
   long      remainder_size;   /* its size */
 
-  if ((long)bytes < 0) return 0;
+  if ((long)bytes < 0) return NULL;
 
   /* If need less alignment than we give anyway, just relay to malloc */
 
@@ -2798,7 +2798,7 @@
   nb = request2size(bytes);
   m  = (char*)(mALLOc(nb + alignment + MINSIZE));
 
-  if (m == 0) return 0; /* propagate failure */
+  if (m == NULL) return NULL; /* propagate failure */
 
   p = mem2chunk(m);
 
@@ -2923,10 +2923,10 @@
 #endif
   Void_t* mem = mALLOc (sz);
 
-  if ((long)n < 0) return 0;
+  if ((long)n < 0) return NULL;
 
-  if (mem == 0)
-    return 0;
+  if (mem == NULL)
+    return NULL;
   else
   {
     p = mem2chunk(mem);
@@ -3072,7 +3072,7 @@
 #endif
 {
   mchunkptr p;
-  if (mem == 0)
+  if (mem == NULL)
     return 0;
   else
   {
diff --git a/common/env_common.c b/common/env_common.c
index 61c4be5..3d3cb70 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -37,102 +37,7 @@
 /************************************************************************
  * Default settings to be used when no valid environment is found
  */
-
-const uchar default_environment[] = {
-#ifdef	CONFIG_BOOTARGS
-	"bootargs="	CONFIG_BOOTARGS			"\0"
-#endif
-#ifdef	CONFIG_BOOTCOMMAND
-	"bootcmd="	CONFIG_BOOTCOMMAND		"\0"
-#endif
-#ifdef	CONFIG_RAMBOOTCOMMAND
-	"ramboot="	CONFIG_RAMBOOTCOMMAND		"\0"
-#endif
-#ifdef	CONFIG_NFSBOOTCOMMAND
-	"nfsboot="	CONFIG_NFSBOOTCOMMAND		"\0"
-#endif
-#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
-	"bootdelay="	__stringify(CONFIG_BOOTDELAY)	"\0"
-#endif
-#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0)
-	"baudrate="	__stringify(CONFIG_BAUDRATE)	"\0"
-#endif
-#ifdef	CONFIG_LOADS_ECHO
-	"loads_echo="	__stringify(CONFIG_LOADS_ECHO)	"\0"
-#endif
-#ifdef	CONFIG_ETHADDR
-	"ethaddr="	__stringify(CONFIG_ETHADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETH1ADDR
-	"eth1addr="	__stringify(CONFIG_ETH1ADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETH2ADDR
-	"eth2addr="	__stringify(CONFIG_ETH2ADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETH3ADDR
-	"eth3addr="	__stringify(CONFIG_ETH3ADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETH4ADDR
-	"eth4addr="	__stringify(CONFIG_ETH4ADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETH5ADDR
-	"eth5addr="	__stringify(CONFIG_ETH5ADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETHPRIME
-	"ethprime="	CONFIG_ETHPRIME			"\0"
-#endif
-#ifdef	CONFIG_IPADDR
-	"ipaddr="	__stringify(CONFIG_IPADDR)	"\0"
-#endif
-#ifdef	CONFIG_SERVERIP
-	"serverip="	__stringify(CONFIG_SERVERIP)	"\0"
-#endif
-#ifdef	CONFIG_SYS_AUTOLOAD
-	"autoload="	CONFIG_SYS_AUTOLOAD		"\0"
-#endif
-#ifdef	CONFIG_PREBOOT
-	"preboot="	CONFIG_PREBOOT			"\0"
-#endif
-#ifdef	CONFIG_ROOTPATH
-	"rootpath="	CONFIG_ROOTPATH			"\0"
-#endif
-#ifdef	CONFIG_GATEWAYIP
-	"gatewayip="	__stringify(CONFIG_GATEWAYIP)	"\0"
-#endif
-#ifdef	CONFIG_NETMASK
-	"netmask="	__stringify(CONFIG_NETMASK)	"\0"
-#endif
-#ifdef	CONFIG_HOSTNAME
-	"hostname="	__stringify(CONFIG_HOSTNAME)	"\0"
-#endif
-#ifdef	CONFIG_BOOTFILE
-	"bootfile="	CONFIG_BOOTFILE			"\0"
-#endif
-#ifdef	CONFIG_LOADADDR
-	"loadaddr="	__stringify(CONFIG_LOADADDR)	"\0"
-#endif
-#ifdef	CONFIG_CLOCKS_IN_MHZ
-	"clocks_in_mhz=1\0"
-#endif
-#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
-	"pcidelay="	__stringify(CONFIG_PCI_BOOTDELAY)"\0"
-#endif
-#ifdef	CONFIG_ENV_VARS_UBOOT_CONFIG
-	"arch="		CONFIG_SYS_ARCH			"\0"
-	"cpu="		CONFIG_SYS_CPU			"\0"
-	"board="	CONFIG_SYS_BOARD		"\0"
-#ifdef CONFIG_SYS_VENDOR
-	"vendor="	CONFIG_SYS_VENDOR		"\0"
-#endif
-#ifdef CONFIG_SYS_SOC
-	"soc="		CONFIG_SYS_SOC			"\0"
-#endif
-#endif
-#ifdef	CONFIG_EXTRA_ENV_SETTINGS
-	CONFIG_EXTRA_ENV_SETTINGS
-#endif
-	"\0"
-};
+#include <env_default.h>
 
 struct hsearch_data env_htab = {
 	.apply = env_check_apply,
diff --git a/common/env_embedded.c b/common/env_embedded.c
index 8cc08ae..52bc687 100644
--- a/common/env_embedded.c
+++ b/common/env_embedded.c
@@ -89,107 +89,9 @@
 #  define ENV_CRC	(~0)
 #endif
 
-env_t environment __PPCENV__ = {
-	ENV_CRC,	/* CRC Sum */
-#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
-	1,		/* Flags: valid */
-#endif
-	{
-#if defined(CONFIG_BOOTARGS)
-	"bootargs="	CONFIG_BOOTARGS			"\0"
-#endif
-#if defined(CONFIG_BOOTCOMMAND)
-	"bootcmd="	CONFIG_BOOTCOMMAND		"\0"
-#endif
-#if defined(CONFIG_RAMBOOTCOMMAND)
-	"ramboot="	CONFIG_RAMBOOTCOMMAND		"\0"
-#endif
-#if defined(CONFIG_NFSBOOTCOMMAND)
-	"nfsboot="	CONFIG_NFSBOOTCOMMAND		"\0"
-#endif
-#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
-	"bootdelay="	__stringify(CONFIG_BOOTDELAY)	"\0"
-#endif
-#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0)
-	"baudrate="	__stringify(CONFIG_BAUDRATE)	"\0"
-#endif
-#ifdef	CONFIG_LOADS_ECHO
-	"loads_echo="	__stringify(CONFIG_LOADS_ECHO)	"\0"
-#endif
-#ifdef	CONFIG_ETHADDR
-	"ethaddr="	__stringify(CONFIG_ETHADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETH1ADDR
-	"eth1addr="	__stringify(CONFIG_ETH1ADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETH2ADDR
-	"eth2addr="	__stringify(CONFIG_ETH2ADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETH3ADDR
-	"eth3addr="	__stringify(CONFIG_ETH3ADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETH4ADDR
-	"eth4addr="	__stringify(CONFIG_ETH4ADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETH5ADDR
-	"eth5addr="	__stringify(CONFIG_ETH5ADDR)	"\0"
-#endif
-#ifdef	CONFIG_ETHPRIME
-	"ethprime="	CONFIG_ETHPRIME			"\0"
-#endif
-#ifdef	CONFIG_IPADDR
-	"ipaddr="	__stringify(CONFIG_IPADDR)	"\0"
-#endif
-#ifdef	CONFIG_SERVERIP
-	"serverip="	__stringify(CONFIG_SERVERIP)	"\0"
-#endif
-#ifdef	CONFIG_SYS_AUTOLOAD
-	"autoload="	CONFIG_SYS_AUTOLOAD		"\0"
-#endif
-#ifdef	CONFIG_ROOTPATH
-	"rootpath="	CONFIG_ROOTPATH			"\0"
-#endif
-#ifdef	CONFIG_GATEWAYIP
-	"gatewayip="	__stringify(CONFIG_GATEWAYIP)	"\0"
-#endif
-#ifdef	CONFIG_NETMASK
-	"netmask="	__stringify(CONFIG_NETMASK)	"\0"
-#endif
-#ifdef	CONFIG_HOSTNAME
-	"hostname="	__stringify(CONFIG_HOSTNAME)	"\0"
-#endif
-#ifdef	CONFIG_BOOTFILE
-	"bootfile="	CONFIG_BOOTFILE			"\0"
-#endif
-#ifdef	CONFIG_LOADADDR
-	"loadaddr="	__stringify(CONFIG_LOADADDR)	"\0"
-#endif
-#ifdef	CONFIG_PREBOOT
-	"preboot="	CONFIG_PREBOOT			"\0"
-#endif
-#ifdef	CONFIG_CLOCKS_IN_MHZ
-	"clocks_in_mhz=" "1"				"\0"
-#endif
-#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
-	"pcidelay="	__stringify(CONFIG_PCI_BOOTDELAY)"\0"
-#endif
-#ifdef	CONFIG_ENV_VARS_UBOOT_CONFIG
-	"arch="		CONFIG_SYS_ARCH			"\0"
-	"cpu="		CONFIG_SYS_CPU			"\0"
-	"board="	CONFIG_SYS_BOARD		"\0"
-#ifdef CONFIG_SYS_VENDOR
-	"vendor="	CONFIG_SYS_VENDOR		"\0"
-#endif
-#ifdef CONFIG_SYS_SOC
-	"soc="		CONFIG_SYS_SOC			"\0"
-#endif
-#endif
-#ifdef	CONFIG_EXTRA_ENV_SETTINGS
-	CONFIG_EXTRA_ENV_SETTINGS
-#endif
-	"\0"		/* Term. env_t.data with 2 NULs */
-	}
-};
+#define DEFAULT_ENV_INSTANCE_EMBEDDED
+#include <env_default.h>
+
 #ifdef CONFIG_ENV_ADDR_REDUND
 env_t redundand_environment __PPCENV__ = {
 	0,		/* CRC Sum: invalid */
diff --git a/common/hush.c b/common/hush.c
index 4c84c2f..eb6c879 100644
--- a/common/hush.c
+++ b/common/hush.c
@@ -289,8 +289,7 @@
 char **global_argv;
 unsigned int global_argc;
 #endif
-unsigned int last_return_code;
-int nesting_level;
+static unsigned int last_return_code;
 #ifndef __U_BOOT__
 extern char **environ; /* This is in <unistd.h>, but protected with __USE_GNU */
 #endif
@@ -2172,7 +2171,7 @@
 	 * NAME=VALUE format.  So the first order of business is to
 	 * split 's' on the '=' into 'name' and 'value' */
 	value = strchr(name, '=');
-	if (value==0 && ++value==0) {
+	if (value == NULL && ++value == NULL) {
 		free(name);
 		return -1;
 	}
@@ -2207,13 +2206,13 @@
 			result = -1;
 		} else {
 			cur->name = strdup(name);
-			if(cur->name == 0) {
+			if (cur->name == NULL) {
 				free(cur);
 				result = -1;
 			} else {
 				struct variables *bottom = top_vars;
 				cur->value = strdup(value);
-				cur->next = 0;
+				cur->next = NULL;
 				cur->flg_export = flg_export;
 				cur->flg_read_only = 0;
 				while(bottom->next) bottom=bottom->next;
@@ -2246,7 +2245,7 @@
 			if(strcmp(cur->name, name)==0)
 				break;
 		}
-		if(cur!=0) {
+		if (cur != NULL) {
 			struct variables *next = top_vars;
 			if(cur->flg_read_only) {
 				error_msg("%s: readonly variable", name);
@@ -2329,7 +2328,8 @@
 }
 #endif
 
-struct pipe *new_pipe(void) {
+static struct pipe *new_pipe(void)
+{
 	struct pipe *pi;
 	pi = xmalloc(sizeof(struct pipe));
 	pi->num_progs = 0;
@@ -2387,7 +2387,7 @@
 };
 #define NRES (sizeof(reserved_list)/sizeof(struct reserved_combo))
 
-int reserved_word(o_string *dest, struct p_context *ctx)
+static int reserved_word(o_string *dest, struct p_context *ctx)
 {
 	struct reserved_combo *r;
 	for (r=reserved_list;
@@ -2924,8 +2924,8 @@
 #endif
 
 /* return code is 0 for normal exit, 1 for syntax error */
-int parse_stream(o_string *dest, struct p_context *ctx,
-	struct in_str *input, int end_trigger)
+static int parse_stream(o_string *dest, struct p_context *ctx,
+			struct in_str *input, int end_trigger)
 {
 	unsigned int ch, m;
 #ifndef __U_BOOT__
@@ -3124,13 +3124,13 @@
 	return 0;
 }
 
-void mapset(const unsigned char *set, int code)
+static void mapset(const unsigned char *set, int code)
 {
 	const unsigned char *s;
 	for (s=set; *s; s++) map[*s] = code;
 }
 
-void update_ifs_map(void)
+static void update_ifs_map(void)
 {
 	/* char *ifs and char map[256] are both globals. */
 	ifs = (uchar *)getenv("IFS");
@@ -3158,7 +3158,7 @@
 
 /* most recursion does not come through here, the exeception is
  * from builtin_source() */
-int parse_stream_outer(struct in_str *inp, int flag)
+static int parse_stream_outer(struct in_str *inp, int flag)
 {
 
 	struct p_context ctx;
@@ -3292,7 +3292,7 @@
 		top_vars = malloc(sizeof(struct variables));
 		top_vars->name = "HUSH_VERSION";
 		top_vars->value = "0.01";
-		top_vars->next = 0;
+		top_vars->next = NULL;
 		top_vars->flg_export = 0;
 		top_vars->flg_read_only = 1;
 #ifdef CONFIG_NEEDS_MANUAL_RELOC
@@ -3628,7 +3628,8 @@
 }
 
 #ifdef __U_BOOT__
-int do_showvar (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+static int do_showvar(cmd_tbl_t *cmdtp, int flag, int argc,
+		      char * const argv[])
 {
 	int i, k;
 	int rcode = 0;
diff --git a/common/image.c b/common/image.c
index f084d2b..df642e6 100644
--- a/common/image.c
+++ b/common/image.c
@@ -1279,7 +1279,7 @@
 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size)
 {
 	void	*fdt_blob = *of_flat_tree;
-	void	*of_start = 0;
+	void	*of_start = NULL;
 	char	*fdt_high;
 	ulong	of_len = 0;
 	int	err;
@@ -1312,7 +1312,7 @@
 			of_start =
 			    (void *)(ulong) lmb_alloc_base(lmb, of_len, 0x1000,
 							   (ulong)desired_addr);
-			if (of_start == 0) {
+			if (of_start == NULL) {
 				puts("Failed using fdt_high value for Device Tree");
 				goto error;
 			}
@@ -1327,7 +1327,7 @@
 						   + getenv_bootm_low());
 	}
 
-	if (of_start == 0) {
+	if (of_start == NULL) {
 		puts("device tree - allocation error\n");
 		goto error;
 	}
@@ -1703,7 +1703,7 @@
 	return 0;
 
 error:
-	*of_flat_tree = 0;
+	*of_flat_tree = NULL;
 	*of_size = 0;
 	return 1;
 }
@@ -2496,6 +2496,36 @@
 	return 0;
 }
 
+#ifndef USE_HOSTCC
+/**
+ * fit_image_hash_get_ignore - get hash ignore flag
+ * @fit: pointer to the FIT format image header
+ * @noffset: hash node offset
+ * @ignore: pointer to an int, will hold hash ignore flag
+ *
+ * fit_image_hash_get_ignore() finds hash ignore property in a given hash node.
+ * If the property is found and non-zero, the hash algorithm is not verified by
+ * u-boot automatically.
+ *
+ * returns:
+ *     0, on ignore not found
+ *     value, on ignore found
+ */
+int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore)
+{
+	int len;
+	int *value;
+
+	value = (int *)fdt_getprop(fit, noffset, FIT_IGNORE_PROP, &len);
+	if (value == NULL || len != sizeof(int))
+		*ignore = 0;
+	else
+		*ignore = *value;
+
+	return 0;
+}
+#endif
+
 /**
  * fit_set_timestamp - set node timestamp property
  * @fit: pointer to the FIT format image header
@@ -2759,6 +2789,9 @@
 	char		*algo;
 	uint8_t		*fit_value;
 	int		fit_value_len;
+#ifndef USE_HOSTCC
+	int		ignore;
+#endif
 	uint8_t		value[FIT_MAX_HASH_LEN];
 	int		value_len;
 	int		noffset;
@@ -2795,6 +2828,14 @@
 			}
 			printf("%s", algo);
 
+#ifndef USE_HOSTCC
+			fit_image_hash_get_ignore(fit, noffset, &ignore);
+			if (ignore) {
+				printf("-skipped ");
+				continue;
+			}
+#endif
+
 			if (fit_image_hash_get_value(fit, noffset, &fit_value,
 							&fit_value_len)) {
 				err_msg = " error!\nCan't get hash value "
@@ -2820,6 +2861,11 @@
 		}
 	}
 
+	if (noffset == -FDT_ERR_TRUNCATED || noffset == -FDT_ERR_BADSTRUCTURE) {
+		err_msg = " error!\nCorrupted or truncated tree";
+		goto error;
+	}
+
 	return 1;
 
 error:
diff --git a/common/iomux.c b/common/iomux.c
index dbc2312..6a75704 100644
--- a/common/iomux.c
+++ b/common/iomux.c
@@ -135,16 +135,6 @@
 		 */
 		if (console_assign(console, start[j]) < 0)
 			continue;
-		/*
-		 * This was taken from common/cmd_nvedit.c.
-		 * This will never work because serial_assign() returns
-		 * 1 upon error, not -1.
-		 * This would almost always return an error anyway because
-		 * serial_assign() expects the name of a serial device, like
-		 * serial_smc, but the user generally only wants to set serial.
-		 */
-		if (serial_assign(start[j]) < 0)
-			continue;
 		cons_set[cs_idx++] = dev;
 	}
 	free(console_args);
diff --git a/common/main.c b/common/main.c
index 9507cec..592ce07 100644
--- a/common/main.c
+++ b/common/main.c
@@ -505,13 +505,13 @@
 #define HIST_MAX		20
 #define HIST_SIZE		CONFIG_SYS_CBSIZE
 
-static int hist_max = 0;
-static int hist_add_idx = 0;
+static int hist_max;
+static int hist_add_idx;
 static int hist_cur = -1;
-unsigned hist_num = 0;
+static unsigned hist_num;
 
-char* hist_list[HIST_MAX];
-char hist_lines[HIST_MAX][HIST_SIZE + 1];	 /* Save room for NULL */
+static char *hist_list[HIST_MAX];
+static char hist_lines[HIST_MAX][HIST_SIZE + 1];	/* Save room for NULL */
 
 #define add_idx_minus_one() ((hist_add_idx == 0) ? hist_max : hist_add_idx-1)
 
diff --git a/common/spl/spl.c b/common/spl/spl.c
index 0d829c0..f068abd 100644
--- a/common/spl/spl.c
+++ b/common/spl/spl.c
@@ -113,13 +113,13 @@
 	}
 }
 
-static void __noreturn jump_to_image_no_args(void)
+__weak void __noreturn jump_to_image_no_args(struct spl_image_info *spl_image)
 {
 	typedef void __noreturn (*image_entry_noargs_t)(u32 *);
 	image_entry_noargs_t image_entry =
-			(image_entry_noargs_t) spl_image.entry_point;
+			(image_entry_noargs_t) spl_image->entry_point;
 
-	debug("image entry point: 0x%X\n", spl_image.entry_point);
+	debug("image entry point: 0x%X\n", spl_image->entry_point);
 	/* Pass the saved boot_params from rom code */
 #if defined(CONFIG_VIRTIO) || defined(CONFIG_ZEBU)
 	image_entry = (image_entry_noargs_t)0x80100000;
@@ -223,7 +223,7 @@
 	default:
 		debug("Unsupported OS image.. Jumping nevertheless..\n");
 	}
-	jump_to_image_no_args();
+	jump_to_image_no_args(&spl_image);
 }
 
 /*
diff --git a/common/update.c b/common/update.c
index 5b1a064..94d6a82 100644
--- a/common/update.c
+++ b/common/update.c
@@ -37,6 +37,7 @@
 #include <command.h>
 #include <flash.h>
 #include <net.h>
+#include <net/tftp.h>
 #include <malloc.h>
 
 /* env variable holding the location of the update file */
diff --git a/common/usb.c b/common/usb.c
index 1c9763c..50b8175 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -508,8 +508,8 @@
 	tmp = le16_to_cpu(config->wTotalLength);
 
 	if (tmp > USB_BUFSIZ) {
-		USB_PRINTF("usb_get_configuration_no: failed to get " \
-			   "descriptor - too long: %d\n", tmp);
+		printf("usb_get_configuration_no: failed to get " \
+		       "descriptor - too long: %d\n", tmp);
 		return -1;
 	}
 
@@ -946,7 +946,13 @@
 	le16_to_cpus(&dev->descriptor.idProduct);
 	le16_to_cpus(&dev->descriptor.bcdDevice);
 	/* only support for one config for now */
-	usb_get_configuration_no(dev, tmpbuf, 0);
+	err = usb_get_configuration_no(dev, tmpbuf, 0);
+	if (err < 0) {
+		printf("usb_new_device: Cannot read configuration, " \
+		       "skipping device %04x:%04x\n",
+		       dev->descriptor.idVendor, dev->descriptor.idProduct);
+		return -1;
+	}
 	usb_parse_config(dev, tmpbuf, 0);
 	usb_set_maxpacket(dev);
 	/* we set the default configuration here */
diff --git a/common/usb_storage.c b/common/usb_storage.c
index 950451e..2d92ee1 100644
--- a/common/usb_storage.c
+++ b/common/usb_storage.c
@@ -179,9 +179,9 @@
 int usb_storage_probe(struct usb_device *dev, unsigned int ifnum,
 		      struct us_data *ss);
 unsigned long usb_stor_read(int device, unsigned long blknr,
-			    unsigned long blkcnt, void *buffer);
+			    lbaint_t blkcnt, void *buffer);
 unsigned long usb_stor_write(int device, unsigned long blknr,
-			     unsigned long blkcnt, const void *buffer);
+			     lbaint_t blkcnt, const void *buffer);
 struct usb_device * usb_get_dev_index(int index);
 void uhci_show_temp_int_td(void);
 
@@ -192,7 +192,7 @@
 }
 #endif
 
-void usb_show_progress(void)
+static void usb_show_progress(void)
 {
 	debug(".");
 }
@@ -437,7 +437,7 @@
 	result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 				 US_BBB_RESET,
 				 USB_TYPE_CLASS | USB_RECIP_INTERFACE,
-				 0, us->ifnum, 0, 0, USB_CNTL_TIMEOUT * 5);
+				 0, us->ifnum, NULL, 0, USB_CNTL_TIMEOUT * 5);
 
 	if ((result < 0) && (us->pusb_dev->status & USB_ST_STALLED)) {
 		USB_STOR_PRINTF("RESET:stall\n");
@@ -500,7 +500,7 @@
  * Set up the command for a BBB device. Note that the actual SCSI
  * command is copied into cbw.CBWCDB.
  */
-int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
+static int usb_stor_BBB_comdat(ccb *srb, struct us_data *us)
 {
 	int result;
 	int actlen;
@@ -548,7 +548,7 @@
 /* FIXME: we also need a CBI_command which sets up the completion
  * interrupt, and waits for it
  */
-int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
+static int usb_stor_CB_comdat(ccb *srb, struct us_data *us)
 {
 	int result = 0;
 	int dir_in, retry;
@@ -617,7 +617,7 @@
 }
 
 
-int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
+static int usb_stor_CBI_get_status(ccb *srb, struct us_data *us)
 {
 	int timeout;
 
@@ -626,7 +626,7 @@
 			(void *) &us->ip_data, us->irqmaxp, us->irqinterval);
 	timeout = 1000;
 	while (timeout--) {
-		if ((volatile int *) us->ip_wanted == 0)
+		if ((volatile int *) us->ip_wanted == NULL)
 			break;
 		mdelay(10);
 	}
@@ -665,18 +665,18 @@
 #define USB_TRANSPORT_NOT_READY_RETRY 10
 
 /* clear a stall on an endpoint - special for BBB devices */
-int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
+static int usb_stor_BBB_clear_endpt_stall(struct us_data *us, __u8 endpt)
 {
 	int result;
 
 	/* ENDPOINT_HALT = 0, so set value to 0 */
 	result = usb_control_msg(us->pusb_dev, usb_sndctrlpipe(us->pusb_dev, 0),
 				USB_REQ_CLEAR_FEATURE, USB_RECIP_ENDPOINT,
-				0, endpt, 0, 0, USB_CNTL_TIMEOUT * 5);
+				0, endpt, NULL, 0, USB_CNTL_TIMEOUT * 5);
 	return result;
 }
 
-int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
+static int usb_stor_BBB_transport(ccb *srb, struct us_data *us)
 {
 	int result, retry;
 	int dir_in;
@@ -798,7 +798,7 @@
 	return result;
 }
 
-int usb_stor_CB_transport(ccb *srb, struct us_data *us)
+static int usb_stor_CB_transport(ccb *srb, struct us_data *us)
 {
 	int result, status;
 	ccb *psrb;
@@ -1053,9 +1053,10 @@
 #endif /* CONFIG_USB_BIN_FIXUP */
 
 unsigned long usb_stor_read(int device, unsigned long blknr,
-			    unsigned long blkcnt, void *buffer)
+			    lbaint_t blkcnt, void *buffer)
 {
-	unsigned long start, blks, buf_addr;
+	lbaint_t start, blks;
+	uintptr_t buf_addr;
 	unsigned short smallblks;
 	struct usb_device *dev;
 	struct us_data *ss;
@@ -1084,7 +1085,7 @@
 	start = blknr;
 	blks = blkcnt;
 
-	USB_STOR_PRINTF("\nusb_read: dev %d startblk %lx, blccnt %lx"
+	USB_STOR_PRINTF("\nusb_read: dev %d startblk " LBAF ", blccnt " LBAF
 			" buffer %lx\n", device, start, blks, buf_addr);
 
 	do {
@@ -1114,7 +1115,8 @@
 	} while (blks != 0);
 	ss->flags &= ~USB_READY;
 
-	USB_STOR_PRINTF("usb_read: end startblk %lx, blccnt %x buffer %lx\n",
+	USB_STOR_PRINTF("usb_read: end startblk " LBAF
+			", blccnt %x buffer %lx\n",
 			start, smallblks, buf_addr);
 
 	usb_disable_asynch(0); /* asynch transfer allowed */
@@ -1124,9 +1126,10 @@
 }
 
 unsigned long usb_stor_write(int device, unsigned long blknr,
-				unsigned long blkcnt, const void *buffer)
+				lbaint_t blkcnt, const void *buffer)
 {
-	unsigned long start, blks, buf_addr;
+	lbaint_t start, blks;
+	uintptr_t buf_addr;
 	unsigned short smallblks;
 	struct usb_device *dev;
 	struct us_data *ss;
@@ -1156,7 +1159,7 @@
 	start = blknr;
 	blks = blkcnt;
 
-	USB_STOR_PRINTF("\nusb_write: dev %d startblk %lx, blccnt %lx"
+	USB_STOR_PRINTF("\nusb_write: dev %d startblk " LBAF ", blccnt " LBAF
 			" buffer %lx\n", device, start, blks, buf_addr);
 
 	do {
@@ -1188,7 +1191,8 @@
 	} while (blks != 0);
 	ss->flags &= ~USB_READY;
 
-	USB_STOR_PRINTF("usb_write: end startblk %lx, blccnt %x buffer %lx\n",
+	USB_STOR_PRINTF("usb_write: end startblk " LBAF
+			", blccnt %x buffer %lx\n",
 			start, smallblks, buf_addr);
 
 	usb_disable_asynch(0); /* asynch transfer allowed */
diff --git a/common/xyzModem.c b/common/xyzModem.c
index a1f955b..f30b002 100644
--- a/common/xyzModem.c
+++ b/common/xyzModem.c
@@ -100,7 +100,7 @@
 
 #ifndef REDBOOT			/*SB */
 typedef int cyg_int32;
-int
+static int
 CYGACC_COMM_IF_GETC_TIMEOUT (char chan, char *c)
 {
 #define DELAY 20
@@ -118,7 +118,7 @@
   return 0;
 }
 
-void
+static void
 CYGACC_COMM_IF_PUTC (char x, char y)
 {
   putc (y);
@@ -165,7 +165,7 @@
 }
 
 /* Parse (scan) a number */
-bool
+static bool
 parse_num (char *s, unsigned long *val, char **es, char *delim)
 {
   bool first = true;
diff --git a/config.mk b/config.mk
index bb5c69a..b7cd481 100644
--- a/config.mk
+++ b/config.mk
@@ -23,6 +23,8 @@
 
 #########################################################################
 
+include $(TOPDIR)/helper.mk
+
 ifeq ($(CURDIR),$(SRCTREE))
 dir :=
 else
diff --git a/disk/part.c b/disk/part.c
index 3022969..4646f68 100644
--- a/disk/part.c
+++ b/disk/part.c
@@ -35,12 +35,15 @@
 #define PRINTF(fmt,args...)
 #endif
 
+/* Rather than repeat this expression each time, add a define for it */
 #if (defined(CONFIG_CMD_IDE) || \
      defined(CONFIG_CMD_SATA) || \
      defined(CONFIG_CMD_SCSI) || \
      defined(CONFIG_CMD_USB) || \
      defined(CONFIG_MMC) || \
      defined(CONFIG_SYSTEMACE) )
+#define HAVE_BLOCK_DEVICE
+#endif
 
 struct block_drvr {
 	char *name;
@@ -71,6 +74,7 @@
 
 DECLARE_GLOBAL_DATA_PTR;
 
+#ifdef HAVE_BLOCK_DEVICE
 block_dev_desc_t *get_dev(const char *ifname, int dev)
 {
 	const struct block_drvr *drvr = block_drvr;
@@ -104,12 +108,7 @@
 }
 #endif
 
-#if (defined(CONFIG_CMD_IDE) || \
-     defined(CONFIG_CMD_SATA) || \
-     defined(CONFIG_CMD_SCSI) || \
-     defined(CONFIG_CMD_USB) || \
-     defined(CONFIG_MMC) || \
-     defined(CONFIG_SYSTEMACE) )
+#ifdef HAVE_BLOCK_DEVICE
 
 /* ------------------------------------------------------------------------- */
 /*
@@ -239,18 +238,7 @@
 }
 #endif
 
-#if (defined(CONFIG_CMD_IDE) || \
-     defined(CONFIG_CMD_SATA) || \
-     defined(CONFIG_CMD_SCSI) || \
-     defined(CONFIG_CMD_USB) || \
-     defined(CONFIG_MMC)		|| \
-     defined(CONFIG_SYSTEMACE) )
-
-#if defined(CONFIG_MAC_PARTITION) || \
-    defined(CONFIG_DOS_PARTITION) || \
-    defined(CONFIG_ISO_PARTITION) || \
-    defined(CONFIG_AMIGA_PARTITION) || \
-    defined(CONFIG_EFI_PARTITION)
+#ifdef HAVE_BLOCK_DEVICE
 
 void init_part (block_dev_desc_t * dev_desc)
 {
@@ -293,6 +281,12 @@
 }
 
 
+#if defined(CONFIG_MAC_PARTITION) || \
+	defined(CONFIG_DOS_PARTITION) || \
+	defined(CONFIG_ISO_PARTITION) || \
+	defined(CONFIG_AMIGA_PARTITION) || \
+	defined(CONFIG_EFI_PARTITION)
+
 static void print_part_header (const char *type, block_dev_desc_t * dev_desc)
 {
 	puts ("\nPartition Map for ");
@@ -326,6 +320,8 @@
 			dev_desc->dev, type);
 }
 
+#endif /* any CONFIG_..._PARTITION */
+
 void print_part (block_dev_desc_t * dev_desc)
 {
 
@@ -372,24 +368,12 @@
 	puts ("## Unknown partition table\n");
 }
 
-
-#else	/* neither MAC nor DOS nor ISO nor AMIGA nor EFI partition configured */
-# error neither CONFIG_MAC_PARTITION nor CONFIG_DOS_PARTITION
-# error nor CONFIG_ISO_PARTITION nor CONFIG_AMIGA_PARTITION
-# error nor CONFIG_EFI_PARTITION configured!
-#endif
-
-#endif
+#endif /* HAVE_BLOCK_DEVICE */
 
 int get_partition_info(block_dev_desc_t *dev_desc, int part
 					, disk_partition_t *info)
 {
-#if defined(CONFIG_CMD_IDE) || \
-	defined(CONFIG_CMD_SATA) || \
-	defined(CONFIG_CMD_SCSI) || \
-	defined(CONFIG_CMD_USB) || \
-	defined(CONFIG_MMC) || \
-	defined(CONFIG_SYSTEMACE)
+#ifdef HAVE_BLOCK_DEVICE
 
 #ifdef CONFIG_PARTITION_UUIDS
 	/* The common case is no UUID support */
@@ -444,7 +428,7 @@
 	default:
 		break;
 	}
-#endif
+#endif /* HAVE_BLOCK_DEVICE */
 
 	return -1;
 }
@@ -561,6 +545,8 @@
 		info->size = (*dev_desc)->lba;
 		info->blksz = (*dev_desc)->blksz;
 		info->bootable = 0;
+		strcpy((char *)info->type, BOOT_PART_TYPE);
+		strcpy((char *)info->name, "Whole Disk");
 #ifdef CONFIG_PARTITION_UUIDS
 		info->uuid[0] = 0;
 #endif
@@ -624,9 +610,9 @@
 			 */
 			if (p == MAX_SEARCH_PARTITIONS + 1)
 				*info = tmpinfo;
-			ret = 0;
 		} else {
 			printf("** No valid partitions found **\n");
+			ret = -1;
 			goto cleanup;
 		}
 	}
diff --git a/disk/part_dos.c b/disk/part_dos.c
index 5c454e6..3fe901b 100644
--- a/disk/part_dos.c
+++ b/disk/part_dos.c
@@ -65,13 +65,14 @@
 	return p->boot_ind == 0x80;
 }
 
-static void print_one_part (dos_partition_t *p, int ext_part_sector, int part_num)
+static void print_one_part(dos_partition_t *p, int ext_part_sector,
+			   int part_num, unsigned int disksig)
 {
 	int lba_start = ext_part_sector + le32_to_int (p->start4);
 	int lba_size  = le32_to_int (p->size4);
 
-	printf("%5d\t\t%10d\t%10d\t%2x%s%s\n",
-		part_num, lba_start, lba_size, p->sys_ind,
+	printf("%3d\t%-10d\t%-10d\t%08x-%02x\t%02x%s%s\n",
+		part_num, lba_start, lba_size, disksig, part_num, p->sys_ind,
 		(is_extended(p->sys_ind) ? " Extd" : ""),
 		(is_bootable(p) ? " Boot" : ""));
 }
@@ -105,8 +106,9 @@
 
 /*  Print a partition that is relative to its Extended partition table
  */
-static void print_partition_extended (block_dev_desc_t *dev_desc, int ext_part_sector, int relative,
-							   int part_num)
+static void print_partition_extended(block_dev_desc_t *dev_desc,
+				     int ext_part_sector, int relative,
+				     int part_num, unsigned int disksig)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz);
 	dos_partition_t *pt;
@@ -125,6 +127,9 @@
 		return;
 	}
 
+	if (!ext_part_sector)
+		disksig = le32_to_int(&buffer[DOS_PART_DISKSIG_OFFSET]);
+
 	/* Print all primary/logical partitions */
 	pt = (dos_partition_t *) (buffer + DOS_PART_TBL_OFFSET);
 	for (i = 0; i < 4; i++, pt++) {
@@ -135,7 +140,7 @@
 
 		if ((pt->sys_ind != 0) &&
 		    (ext_part_sector == 0 || !is_extended (pt->sys_ind)) ) {
-			print_one_part (pt, ext_part_sector, part_num);
+			print_one_part(pt, ext_part_sector, part_num, disksig);
 		}
 
 		/* Reverse engr the fdisk part# assignment rule! */
@@ -151,10 +156,9 @@
 		if (is_extended (pt->sys_ind)) {
 			int lba_start = le32_to_int (pt->start4) + relative;
 
-			print_partition_extended (dev_desc, lba_start,
-						  ext_part_sector == 0  ? lba_start
-									: relative,
-						  part_num);
+			print_partition_extended(dev_desc, lba_start,
+				ext_part_sector == 0  ? lba_start : relative,
+				part_num, disksig);
 		}
 	}
 
@@ -261,8 +265,8 @@
 
 void print_part_dos (block_dev_desc_t *dev_desc)
 {
-	printf ("Partition     Start Sector     Num Sectors     Type\n");
-	print_partition_extended (dev_desc, 0, 0, 1);
+	printf("Part\tStart Sector\tNum Sectors\tUUID\t\tType\n");
+	print_partition_extended(dev_desc, 0, 0, 1, 0);
 }
 
 int get_partition_info_dos (block_dev_desc_t *dev_desc, int part, disk_partition_t * info)
diff --git a/disk/part_efi.c b/disk/part_efi.c
index 264ea9c..a3873ce 100644
--- a/disk/part_efi.c
+++ b/disk/part_efi.c
@@ -113,48 +113,6 @@
 	return name;
 }
 
-/*
- * Public Functions (include/part.h)
- */
-
-void print_part_efi(block_dev_desc_t * dev_desc)
-{
-	ALLOC_CACHE_ALIGN_BUFFER(gpt_header, gpt_head, 1);
-	gpt_entry *gpt_pte = NULL;
-	int i = 0;
-
-	if (!dev_desc) {
-		printf("%s: Invalid Argument(s)\n", __func__);
-		return;
-	}
-	/* This function validates AND fills in the GPT header and PTE */
-	if (is_gpt_valid(dev_desc, GPT_PRIMARY_PARTITION_TABLE_LBA,
-			 gpt_head, &gpt_pte) != 1) {
-		printf("%s: *** ERROR: Invalid GPT ***\n", __func__);
-		return;
-	}
-
-	debug("%s: gpt-entry at %p\n", __func__, gpt_pte);
-
-	printf("Part\tName\t\t\tStart LBA\tEnd LBA\n");
-	for (i = 0; i < le32_to_int(gpt_head->num_partition_entries); i++) {
-
-		if (is_pte_valid(&gpt_pte[i])) {
-			printf("%3d\t%-18s\t0x%08llX\t0x%08llX\n", (i + 1),
-				print_efiname(&gpt_pte[i]),
-				le64_to_int(gpt_pte[i].starting_lba),
-				le64_to_int(gpt_pte[i].ending_lba));
-		} else {
-			break;	/* Stop at the first non valid PTE */
-		}
-	}
-
-	/* Remember to free pte */
-	free(gpt_pte);
-	return;
-}
-
-#ifdef CONFIG_PARTITION_UUIDS
 static void uuid_string(unsigned char *uuid, char *str)
 {
 	static const u8 le[16] = {3, 2, 1, 0, 5, 4, 7, 6, 8, 9, 10, 11,
@@ -174,7 +132,65 @@
 		}
 	}
 }
-#endif
+
+static efi_guid_t system_guid = PARTITION_SYSTEM_GUID;
+
+static inline int is_bootable(gpt_entry *p)
+{
+	return p->attributes.fields.legacy_bios_bootable ||
+		!memcmp(&(p->partition_type_guid), &system_guid,
+			sizeof(efi_guid_t));
+}
+
+/*
+ * Public Functions (include/part.h)
+ */
+
+void print_part_efi(block_dev_desc_t * dev_desc)
+{
+	ALLOC_CACHE_ALIGN_BUFFER(gpt_header, gpt_head, 1);
+	gpt_entry *gpt_pte = NULL;
+	int i = 0;
+	char uuid[37];
+
+	if (!dev_desc) {
+		printf("%s: Invalid Argument(s)\n", __func__);
+		return;
+	}
+	/* This function validates AND fills in the GPT header and PTE */
+	if (is_gpt_valid(dev_desc, GPT_PRIMARY_PARTITION_TABLE_LBA,
+			 gpt_head, &gpt_pte) != 1) {
+		printf("%s: *** ERROR: Invalid GPT ***\n", __func__);
+		return;
+	}
+
+	debug("%s: gpt-entry at %p\n", __func__, gpt_pte);
+
+	printf("Part\tStart LBA\tEnd LBA\t\tName\n");
+	printf("\tAttributes\n");
+	printf("\tType UUID\n");
+	printf("\tPartition UUID\n");
+
+	for (i = 0; i < le32_to_int(gpt_head->num_partition_entries); i++) {
+		/* Stop at the first non valid PTE */
+		if (!is_pte_valid(&gpt_pte[i]))
+			break;
+
+		printf("%3d\t0x%08llx\t0x%08llx\t\"%s\"\n", (i + 1),
+			le64_to_int(gpt_pte[i].starting_lba),
+			le64_to_int(gpt_pte[i].ending_lba),
+			print_efiname(&gpt_pte[i]));
+		printf("\tattrs:\t0x%016llx\n", gpt_pte[i].attributes.raw);
+		uuid_string(gpt_pte[i].partition_type_guid.b, uuid);
+		printf("\ttype:\t%s\n", uuid);
+		uuid_string(gpt_pte[i].unique_partition_guid.b, uuid);
+		printf("\tuuid:\t%s\n", uuid);
+	}
+
+	/* Remember to free pte */
+	free(gpt_pte);
+	return;
+}
 
 int get_partition_info_efi(block_dev_desc_t * dev_desc, int part,
 				disk_partition_t * info)
@@ -212,6 +228,7 @@
 	sprintf((char *)info->name, "%s",
 			print_efiname(&gpt_pte[part - 1]));
 	sprintf((char *)info->type, "U-Boot");
+	info->bootable = is_bootable(&gpt_pte[part - 1]);
 #ifdef CONFIG_PARTITION_UUIDS
 	uuid_string(gpt_pte[part - 1].unique_partition_guid.b, info->uuid);
 #endif
@@ -405,7 +422,7 @@
 	count = le32_to_int(pgpt_head->num_partition_entries) *
 		le32_to_int(pgpt_head->sizeof_partition_entry);
 
-	debug("%s: count = %lu * %lu = %u\n", __func__,
+	debug("%s: count = %lu * %lu = %zu\n", __func__,
 		le32_to_int(pgpt_head->num_partition_entries),
 		le32_to_int(pgpt_head->sizeof_partition_entry), count);
 
@@ -415,7 +432,8 @@
 	}
 
 	if (count == 0 || pte == NULL) {
-		printf("%s: ERROR: Can't allocate 0x%X bytes for GPT Entries\n",
+		printf("%s: ERROR: Can't allocate 0x%zX "
+		       "bytes for GPT Entries\n",
 			__func__, count);
 		return NULL;
 	}
@@ -457,7 +475,7 @@
 		sizeof(unused_guid.b)) == 0) {
 
 		debug("%s: Found an unused PTE GUID at 0x%08X\n", __func__,
-		(unsigned int)pte);
+		      (unsigned int)(uintptr_t)pte);
 
 		return 0;
 	} else {
diff --git a/disk/part_efi.h b/disk/part_efi.h
index 5903e7c..4e28d1d 100644
--- a/disk/part_efi.h
+++ b/disk/part_efi.h
@@ -111,10 +111,15 @@
 	unsigned char reserved2[GPT_BLOCK_SIZE - 92];
 } __attribute__ ((packed)) gpt_header;
 
-typedef struct _gpt_entry_attributes {
-	unsigned long long required_to_function:1;
-	unsigned long long reserved:47;
-	unsigned long long type_guid_specific:16;
+typedef union _gpt_entry_attributes {
+	struct {
+		unsigned long long required_to_function:1;
+		unsigned long long no_block_io_protocol:1;
+		unsigned long long legacy_bios_bootable:1;
+		unsigned long long reserved:45;
+		unsigned long long type_guid_specific:16;
+	} fields;
+	unsigned long long raw;
 } __attribute__ ((packed)) gpt_entry_attributes;
 
 #define PARTNAME_SZ	(72 / sizeof(efi_char16_t))
diff --git a/doc/DocBook/Makefile b/doc/DocBook/Makefile
index 2f2ddfc..da88b32 100644
--- a/doc/DocBook/Makefile
+++ b/doc/DocBook/Makefile
@@ -8,7 +8,7 @@
 
 include $(TOPDIR)/config.mk
 
-DOCBOOKS :=
+DOCBOOKS := linker_lists.xml stdio.xml
 
 ###
 # The build process is as follows (targets):
diff --git a/doc/DocBook/linker_lists.tmpl b/doc/DocBook/linker_lists.tmpl
new file mode 100644
index 0000000..f197516
--- /dev/null
+++ b/doc/DocBook/linker_lists.tmpl
@@ -0,0 +1,46 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="UBootLGArrays">
+ <bookinfo>
+  <title>The U-Boot Linker-Generated Arrays</title>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of U-Boot Bootloader.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="adt">
+     <title>Linker-Generated Arrays</title>
+!Iinclude/linker_lists.h
+  </chapter>
+
+</book>
diff --git a/doc/DocBook/stdio.tmpl b/doc/DocBook/stdio.tmpl
new file mode 100644
index 0000000..4783abb
--- /dev/null
+++ b/doc/DocBook/stdio.tmpl
@@ -0,0 +1,46 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE book PUBLIC "-//OASIS//DTD DocBook XML V4.1.2//EN"
+	"http://www.oasis-open.org/docbook/xml/4.1.2/docbookx.dtd" []>
+
+<book id="UBootSTDIO">
+ <bookinfo>
+  <title>The U-Boot STDIO subsystem</title>
+
+  <legalnotice>
+   <para>
+     This documentation is free software; you can redistribute
+     it and/or modify it under the terms of the GNU General Public
+     License as published by the Free Software Foundation; either
+     version 2 of the License, or (at your option) any later
+     version.
+   </para>
+
+   <para>
+     This program is distributed in the hope that it will be
+     useful, but WITHOUT ANY WARRANTY; without even the implied
+     warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+     See the GNU General Public License for more details.
+   </para>
+
+   <para>
+     You should have received a copy of the GNU General Public
+     License along with this program; if not, write to the Free
+     Software Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+     MA 02111-1307 USA
+   </para>
+
+   <para>
+     For more details see the file COPYING in the source
+     distribution of U-Boot Bootloader.
+   </para>
+  </legalnotice>
+ </bookinfo>
+
+<toc></toc>
+
+  <chapter id="adt">
+     <title>U-Boot Serial subsystem</title>
+!Idrivers/serial/serial.c
+  </chapter>
+
+</book>
diff --git a/doc/README.VSC3316-3308 b/doc/README.VSC3316-3308
new file mode 100644
index 0000000..925663b
--- /dev/null
+++ b/doc/README.VSC3316-3308
@@ -0,0 +1,43 @@
+This file contains API information of the initialization code written for
+Vitesse cross-point devices, VSC3316 and VSC3308 for board B4860QDS
+
+Author: Shaveta Leekha <shaveta@freescale.com>
+
+About Device:
+=============
+VSC 3316/3308 is a low-power, low-cost asynchronous crosspoint switch capable of data rates upto 11.5Gbps.
+
+VSC3316 has 16 input and 16 output ports whereas VSC3308 has 8 input and 8 output ports. Programming of these devices are performed by two-wire or four-wire serial interface.
+
+Initialization:
+===============
+On reset, VSC devices are in low-power state with all inputs, outputs and connections in an off state.
+First thing required is to program it to interface with either two-wire or four-wire interface.
+In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface. Also for crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register).
+
+API Overview:
+=============
+
+	vsc_if_enable(u8 vsc_addr):
+	--------------------------
+		This API programs VSC to interface with either two-wire or four-wire interface. In our case the interface is two-wire I2C serial interface. So the value in Interface mode register at address 79.h to be written is 0x02 for two-wire interface.
+	Parameters:
+		vsc_addr - Address of the VSC device on board.
+
+
+	vsc3316_config(u8 vsc_addr, int con_arr[][2], u8 num_con):
+	---------------------------------------------------------
+	This API configures the VSC3316 device for required connections. Connection through the VSC device requires the inputs and outputs to be properly configured.
+	Connection registers are on page 00. It Configures the selected input and output correctly and join them to make a connection. It also program Input state register, Global input ISE, Global input LOS, Global core control, Output mode register and core control registers etc.
+	vsc3308_config(u8 vsc_addr, int con_arr[][2], u8 num_con) does the essential configurations for VSC3308.
+
+	Parameters:
+		vsc_addr - Address of the VSC device on board.
+		con_arr - connection array
+		num_con - number of connections to be configured
+
+	vsc_wp_config(u8 vsc_addr):
+	--------------------------
+		For crosspoint connections to be activated, 01.h value need to be written in 75.h (core configuration register), which is done by this API.
+	Parameters:
+		vsc_addr - Address of the VSC device on board.
diff --git a/doc/README.commands b/doc/README.commands
index 125f077..923418b 100644
--- a/doc/README.commands
+++ b/doc/README.commands
@@ -15,12 +15,12 @@
 
 **** Behind the scene ******
 
-The structure created is named with a special prefix (__u_boot_cmd_)
+The structure created is named with a special prefix (__u_boot_list_cmd_)
 and placed by the linker in a special section.
 
 This makes it possible for the final link to extract all commands
 compiled into any object code and construct a static array so the
-command can be found in an array starting at __u_boot_cmd_start.
+command can be found in an array starting at _u_boot_list_cmd__start.
 
 To ensure that the linker does not discard these symbols when linking
 full U-Boot we generate a list of all the commands we have built (based
@@ -33,6 +33,6 @@
 by writing in u-boot.lds ($(TOPDIR)/board/boardname/u-boot.lds) these
 3 lines:
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+	.u_boot_list : {
+	#include "u-boot.lst";
+	}
diff --git a/doc/README.ext4 b/doc/README.ext4
index b3ea8b7..b7d0ad3 100644
--- a/doc/README.ext4
+++ b/doc/README.ext4
@@ -1,15 +1,28 @@
 This patch series adds support for ext4 ls,load and write features in uboot
 Journaling is supported for write feature.
 
+To enable support for the ext4 (and ext2) filesystem implementation,
+#define CONFIG_FS_EXT4
+
+If you want write support,
+#define CONFIG_EXT4_WRITE
+
 To Enable ext2 ls and load commands, modify the board specific config file with
 #define CONFIG_CMD_EXT2
+This automatically defines CONFIG_FS_EXT4 for you.
 
 To Enable ext4 ls and load commands, modify the board specific config file with
 #define CONFIG_CMD_EXT4
+This automatically defines CONFIG_FS_EXT4 for you.
 
 To enable ext4 write command, modify the board specific config file with
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
+These automatically define CONFIG_FS_EXT4 and CONFIG_EXT4_WRITE for you.
+
+Also relevant are the generic filesystem commands,
+#define CONFIG_CMD_FS_GENERIC
+This does not automatically enable EXT4 support for you.
 
 Steps to test:
 
diff --git a/doc/README.fsl-ddr b/doc/README.fsl-ddr
index f94b56f..3992640 100644
--- a/doc/README.fsl-ddr
+++ b/doc/README.fsl-ddr
@@ -103,6 +103,11 @@
   # bank(chip-select) interleaving (cs0+cs1+cs2+cs3) (4x1)
   setenv hwconfig "fsl_ddr:bank_intlv=cs0_cs1_cs2_cs3"
 
+  # bank(chip-select) interleaving (auto)
+  setenv hwconfig "fsl_ddr:bank_intlv=auto"
+  This auto mode only select from cs0_cs1_cs2_cs3, cs0_cs1, null dependings
+  on DIMMs.
+
 Memory controller address hashing
 ==================================
 If the DDR controller supports address hashing, it can be enabled by hwconfig.
diff --git a/doc/README.m54418twr b/doc/README.m54418twr
new file mode 100644
index 0000000..f69ae01
--- /dev/null
+++ b/doc/README.m54418twr
@@ -0,0 +1,244 @@
+Freescale MCF54418TWR ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created Mar 22, 2012
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m54418twr/m54418twr.c	Dram setup
+- board/freescale/m54418twr/Makefile	Makefile
+- board/freescale/m54418twr/config.mk	config make
+- board/freescale/m54418twr/u-boot.lds	Linker description
+
+- arch/m68k/cpu/mcf5445x/cpu.c		cpu specific code
+- arch/m68k/cpu/mcf5445x/cpu_init.c	Flexbus ChipSelect, Mux pins setup, icache and RTC extra regs
+- arch/m68k/cpu/mcf5445x/interrupts.c	cpu specific interrupt support
+- arch/m68k/cpu/mcf5445x/speed.c	system, pci, flexbus, and cpu clock
+- arch/m68k/cpu/mcf5445x/Makefile	Makefile
+- arch/m68k/cpu/mcf5445x/config.mk	config make
+- arch/m68k/cpu/mcf5445x/start.S	start up assembly code
+
+- doc/README.m54418twr			This readme file
+
+- drivers/net/mcffec.c			ColdFire common FEC driver
+- drivers/net/mcfmii.c			ColdFire common MII driver
+- drivers/serial/mcfuart.c		ColdFire common UART driver
+
+- arch/m68k/include/asm/bitops.h	Bit operation function export
+- arch/m68k/include/asm/byteorder.h	Byte order functions
+- arch/m68k/include/asm/fec.h		FEC structure and definition
+- arch/m68k/include/asm/global_data.h	Global data structure
+- arch/m68k/include/asm/immap.h		ColdFire specific header file and driver macros
+- arch/m68k/include/asm/immap_5441x.h	mcf5441x specific header file
+- arch/m68k/include/asm/io.h		io functions
+- arch/m68k/include/asm/m5441x.h	mcf5441x specific header file
+- arch/m68k/include/asm/posix_types.h	Posix
+- arch/m68k/include/asm/processor.h	header file
+- arch/m68k/include/asm/ptrace.h	Exception structure
+- arch/m68k/include/asm/rtc.h		Realtime clock header file
+- arch/m68k/include/asm/string.h	String function export
+- arch/m68k/include/asm/timer.h		Timer structure and definition
+- arch/m68k/include/asm/types.h		Data types definition
+- arch/m68k/include/asm/uart.h		Uart structure and definition
+- arch/m68k/include/asm/u-boot.h	u-boot structure
+
+- include/configs/M54418TWR.h		Board specific configuration file
+
+- arch/m68k/lib/board.c			board init function
+- arch/m68k/lib/cache.c
+- arch/m68k/lib/interrupts.c		Coldfire common interrupt functions
+- arch/m68k/lib/time.c			Timer functions (Dma timer and PIT)
+- arch/m68k/lib/traps.c			Exception init code
+
+1 MCF5441x specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in thie coldfire family
+
+1.2 Configuration settings for M54418TWR Development Board
+CONFIG_MCF5441x			-- define for all MCF5441x CPUs
+CONFIG_M54418			-- define for all Freescale MCF54418 CPUs
+CONFIG_M54418TWR		-- define for M54418TWR board
+
+CONFIG_MCFUART			-- define to use common CF Uart driver
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE			-- define UART baudrate
+
+CONFIG_MCFFEC			-- define to use common CF FEC driver
+CONFIG_MII			-- enable to use MII driver
+CONFIG_SYS_DISCOVER_PHY		-- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN	--
+CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CONFIG_SYS_FEC1_PINMUX		-- Set FEC1 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE		-- Set FEC0 MII base register
+CONFIG_SYS_FEC1_MIIBASE		-- Set FEC0 MII base register
+MCFFEC_TOUT_LOOP		-- set FEC timeout loop
+CONFIG_HAS_ETH1			-- define to enable second FEC in u-boot
+
+CONFIG_MCFTMR			-- define to use DMA timer
+
+CONFIG_SYS_IMMR			-- define for MBAR offset
+
+CONFIG_EXTRA_CLOCK		-- Enable extra clock such as vco, flexbus, pci, etc
+
+CONFIG_SYS_MBAR			-- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM 	-- Not support
+
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF54455 internal SRAM
+
+CONFIG_SYS_CSn_BASE		-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK		-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL		-- defines the Chip Select Control register
+
+CONFIG_SYS_SDRAM_BASE		-- defines the DRAM Base
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+	MRAM:		0x00000000-0x0003FFFF (256KB)
+	DDR:		0x40000000-0x47FFFFFF (128MB)
+	SRAM:		0x80000000-0x8000FFFF (64KB)
+	IP:		0xE0000000-0xFFFFFFFF (512MB)
+
+3. COMPILATION
+==============
+3.1	To create U-Boot the gcc-4.x compiler set (ColdFire ELF version)
+from codesourcery.com was used. Download it from:
+http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+   export CROSS_COMPILE=cross-compile-prefix
+   cd u-boot
+   make distclean
+   make M54418TWR_config, or			- default to spi serial flash boot, 50Mhz input clock
+   make M54418TWR_nand_mii_config, or		- default to nand flash boot, mii mode, 25Mhz input clock
+   make M54418TWR_nand_rmii_config, or		- default to nand flash boot, rmii mode, 50Mhz input clock
+   make M54418TWR_nand_rmii_lowfreq_config, or	- default to nand flash boot, rmii mode, 50Mhz input clock
+   make M54418TWR_serial_mii_config, or		- default to spi serial flash boot, 25Mhz input clock
+   make M54418TWR_serial_rmii_config, or	- default to spi serial flash boot, 50Mhz input clock
+   make
+
+4. SCREEN DUMP
+==============
+4.1 M54418TWR Development board
+    Boot from NAND flash (NOTE: May not show exactly the same)
+
+U-Boot 2012.10-00209-g12ae1d8-dirty (Oct 18 2012 - 15:54:54)
+
+CPU:   Freescale MCF54418 (Mask:a3 Version:1)
+       CPU CLK 250 MHz BUS CLK 125 MHz FLB CLK 125 MHz
+       INP CLK 50 MHz VCO CLK 500 MHz
+Board: Freescale MCF54418 Tower System
+SPI:   ready
+DRAM:  128 MiB
+NAND:  256 MiB
+In:    serial
+Out:   serial
+Err:   serial
+Net:   FEC0, FEC1
+-> pri
+baudrate=115200
+bootargs=root=/dev/mtdblock2 rw rootfstype=jffs2 mtdparts=NAND:1M(u-boot)ro,7M(k
+ernel)ro,-(jffs2) console=ttyS0,115200
+bootdelay=2
+eth1addr=00:e0:0c:bc:e5:61
+ethact=FEC0
+ethaddr=00:e0:0c:bc:e5:60
+fileaddr=40010000
+filesize=27354
+gatewayip=192.168.1.1
+hostname=M54418TWR
+inpclk=50000000
+ipaddr=192.168.1.2
+load=tftp ${loadaddr} ${u-boot};
+loadaddr=0x40010000
+mem=129024k
+netdev=eth0
+netmask=255.255.255.0
+prog=nand device 0;nand erase 0 40000;nb_update ${loadaddr} ${filesize};save
+serverip=192.168.1.1
+stderr=serial
+stdin=serial
+stdout=serial
+u-boot=u-boot.bin
+upd=run load; run prog
+
+Environment size: 653/131068 bytes
+-> bdinfo
+memstart    = 0x40000000
+memsize     = 0x08000000
+flashstart  = 0x00000000
+flashsize   = 0x00000000
+flashoffset = 0x00000000
+sramstart   = 0x80000000
+sramsize    = 0x00010000
+mbar        = 0xFC000000
+cpufreq     =    250 MHz
+busfreq     =    125 MHz
+flbfreq     =    125 MHz
+inpfreq     =     50 MHz
+vcofreq     =    500 MHz
+ethaddr     = 00:e0:0c:bc:e5:60
+eth1addr    = 00:e0:0c:bc:e5:61
+ip_addr     = 192.168.1.2
+baudrate    = 115200 bps
+-> help
+?       - alias for 'help'
+base    - print or set address offset
+bdinfo  - print Board Info structure
+boot    - boot default, i.e., run 'bootcmd'
+bootd   - boot default, i.e., run 'bootcmd'
+bootelf - Boot from an ELF image in memory
+bootm   - boot application image from memory
+bootp   - boot image via network using BOOTP/TFTP protocol
+bootvx  - Boot vxWorks from an ELF image
+cmp     - memory compare
+coninfo - print console devices and information
+cp      - memory copy
+crc32   - checksum calculation
+dcache  - enable or disable data cache
+dhcp    - boot image via network using DHCP/TFTP protocol
+echo    - echo args to console
+editenv - edit environment variable
+env     - environment handling commands
+exit    - exit script
+false   - do nothing, unsuccessfully
+go      - start application at address 'addr'
+help    - print command description/usage
+icache  - enable or disable instruction cache
+iminfo  - print header information for application image
+imxtract- extract a part of a multi-image
+itest   - return true/false on integer compare
+loop    - infinite loop on address range
+md      - memory display
+mdio    - MDIO utility commands
+mii     - MII utility commands
+mm      - memory modify (auto-incrementing address)
+mtest   - simple RAM read/write test
+mw      - memory write (fill)
+nand    - NAND sub-system
+nb_update- Nand boot update  program
+nboot   - boot from NAND device
+nfs     - boot image via network using NFS protocol
+nm      - memory modify (constant address)
+ping    - send ICMP ECHO_REQUEST to network host
+printenv- print environment variables
+reginfo - print register information
+reset   - Perform RESET of the CPU
+run     - run commands in an environment variable
+saveenv - save environment variables to persistent storage
+setenv  - set environment variables
+sf      - SPI flash sub-system
+showvar - print local hushshell variables
+sleep   - delay execution for some time
+source  - run script from memory
+sspi    - SPI utility command
+test    - minimal test like /bin/sh
+tftpboot- boot image via network using TFTP protocol
+true    - do nothing, successfully
+version - print monitor, compiler and linker version
diff --git a/doc/README.mpc85xx-spin-table b/doc/README.mpc85xx-spin-table
new file mode 100644
index 0000000..8da768a
--- /dev/null
+++ b/doc/README.mpc85xx-spin-table
@@ -0,0 +1,26 @@
+Spin table in cache
+=====================================
+As specified by ePAPR v1.1, the spin table needs to be in cached memory. After
+DDR is initialized and U-boot relocates itself into DDR, the spin table is
+accessible for core 0. It is part of release.S, within 4KB range after
+__secondary_start_page. For other cores to use the spin table, the booting
+process is described below:
+
+Core 0 sets up the reset page on the top 4K of memory (or 4GB if total memory
+is more than 4GB), and creates a TLB to map it to 0xffff_f000, regardless of
+the physical address of this page, with WIMGE=0b01010. Core 0 also enables boot
+page translation for secondary cores to use this page of memory. Then 4KB
+memory is copied from __secondary_start_page to the boot page, after flusing
+cache because this page is mapped as normal DDR. Before copying the reset page,
+core 0 puts the physical address of the spin table (which is in release.S and
+relocated to the top of mapped memory) into a variable __spin_table_addr so
+that secondary cores can see it.
+
+When secondary cores boot up from 0xffff_f000 page, they only have one default
+TLB. While booting, they set up another TLB in AS=1 space and jump into
+the new space. The new TLB covers the physical address of the spin table page,
+with WIMGE =0b00100. Now secondary cores can keep polling the spin table
+without stress DDR bus because both the code and the spin table is in cache.
+
+For the above to work, DDR has to set the 'M' bit of WIMGE, in order to keep
+cache coherence.
diff --git a/doc/README.nokia_rx51 b/doc/README.nokia_rx51
new file mode 100644
index 0000000..a8fdfcd
--- /dev/null
+++ b/doc/README.nokia_rx51
@@ -0,0 +1,104 @@
+Board: Nokia RX-51 aka N900
+
+This board definition results in a u-boot.bin which can be chainloaded
+from NOLO in qemu or on a real N900. It does very little hardware config
+because NOLO has already configured the board. Only needed is enabling
+internal eMMC memory via twl4030 regulator which is not enabled by NOLO.
+
+NOLO is expecting a kernel image and will treat any image it finds in
+onenand as such. This u-boot is intended to be flashed to the N900 like
+a kernel. In order to transparently boot the original kernel, it will be
+appended to u-boot.bin at 0x40000. NOLO will load the entire image into
+(random) memory and execute u-boot, which saves hw revision, boot reason
+and boot mode ATAGs set by NOLO. Then the bootscripts will attempt to load
+uImage or boot.scr from a fat, ext2/ext3 or ext4 filesystem in external
+SD card or internal eMMC memory. If this fails or keyboard is closed then
+the appended kernel image will be booted using some generated and some
+stored ATAGs (see boot order).
+
+There is support for hardware watchdog. Hardware watchdog is started by
+NOLO so u-boot must kick watchdog to prevent reboot device (but not very
+often, max every 2 seconds). There is also support for framebuffer display
+output with ANSI espace codes and the N900 HW keyboard input. USB tty works
+but is disabled because it prevents the current Maemo kernel from booting.
+
+When U-Boot is starting it enable IBE bit in Auxiliary Control Register,
+which is needed for Thumb-2 ISA support. It is workaround for errata 430973.
+
+Default boot order:
+
+ * 0. if keyboard is closed boot automatically attached kernel image
+ * 1. try boot from external SD card
+ * 2. try boot from internal eMMC memory
+ * 3. try boot from attached kernel image
+
+Boot from SD or eMMC in this order:
+
+ * 1.
+   * 1.1 find boot.scr on first fat partition
+   * 1.2 find uImage on first fat parition
+   * 1.3 same order for 2. - 4. fat partition
+ * 2. same as 1. but for ext2/3 partition
+ * 3. same as 1. but for ext4 partition
+
+
+Available additional commands/variables:
+
+ * run sercon - Use serial port for control
+ * run usbcon - Use usbtty for control
+ * run vgacon - Use framebuffer and HW keyboard for control (default)
+
+ * run sdboot - Boot from external SD card (see boot order)
+ * run emmcboot - Boot from internal eMMC memory (see boot order)
+ * run attachboot - Boot attached kernel image (attached to U-Boot binary)
+
+ * run scriptload - Load boot script ${mmcscriptfile}
+ * run scriptboot - Run loaded boot script
+ * run kernload - Load kernel image ${mmckernfile}
+ * run initrdload - Load initrd image ${mmcinitrdfile}
+ * run kernboot - Boot loaded kernel image
+ * run kerninitrdboot - Boot loaded kernel image with loaded initrd image
+
+ * run trymmcscriptboot - Try to load and boot script ${mmcscriptfile}
+ * run trymmckernboot - Try to load and boot kernel image ${mmckernfile}
+ * run trymmckerninitrdboot - Try to load and boot kernel image ${mmckernfile}
+                              with initrd image ${mmcinitrdfile}
+
+Additional variables for loading files from mmc:
+
+ * mmc ${mmcnum} (0 - external, 1 - internal)
+ * partition number ${mmcpart} (1 - 4)
+ * parition type ${mmctype} (fat, ext2)
+
+Additional varuables for booting kernel:
+
+ * setup_omap_atag - Add OMAP table into atags structure (needs maemo kernel)
+ * setup_console_atag - Enable serial console in OMAP table
+ * setup_boot_reason_atag - Change boot reason in OMAP table
+ * setup_boot_mode_atag - Change boot mode in OMAP table
+
+USB TTY:
+
+ Maemo kernel 2.6.28 will crash if u-boot enable usb tty. So USB TTY is disabled.
+ For enabling USB TTY just add this line to file include/configs/nokia_rx51.h
+
+ #define CONFIG_USB_TTY
+
+
+ONENAND support:
+
+ ONENAND support is disabled because not working yet and cause linux kernel to
+ crash or no access to mtd. For enabling ONENAND support add this line at begin
+ of file include/configs/nokia_rx51.h
+
+ #define ONENAND_SUPPORT
+
+
+UBIFS support:
+
+ UBIFS support is disabled, because U-Boot image is too big and cannot be
+ flashed with attached zImage to RX-51 kernel nand area. For enabling UBIFS
+ support first enable ONENAND support and then add this line at begin of file
+ include/configs/nokia_rx51.h
+
+ #define UBIFS_SUPPORT
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index d0f4716..2b868e6 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -11,7 +11,14 @@
 
 Board	Arch	CPU	removed	    Commit	last known maintainer/contact
 =============================================================================
-TQM85xx	powerpc	MPC85xx	-	  -		Stefan Roese <sr@denx.de>
+AMX860	powerpc	mpc860	-	  -		Wolfgang Denk <wd@denx.de>
+c2mon	powerpc	mpc855	-	  -		Wolfgang Denk <wd@denx.de>
+ETX094	powerpc	mpc850	-	  -		Wolfgang Denk <wd@denx.de>
+IAD210	powerpc	mpc860	-	  -		-
+LANTEC	powerpc	mpc850	-	  -		Wolfgang Denk <wd@denx.de>
+SCM	powerpc	mpc8260	-	  -		Wolfgang Grandegger <wg@denx.de>
+SX1	arm	arm925t	-         -
+TQM85xx	powerpc	MPC85xx	d923a5d5  2012-10-04	Stefan Roese <sr@denx.de>
 apollon arm     omap24xx 535c74f  2012-09-18    Kyungmin Park <kyungmin.park@samsung.com>
 tb0229	mips	mips32	3f3110d	  2011-12-12
 rmu	powerpc	MPC850	fb82fd7   2011-12-07	Wolfgang Denk <wd@denx.de>
diff --git a/doc/README.t4240qds b/doc/README.t4240qds
new file mode 100644
index 0000000..677d120
--- /dev/null
+++ b/doc/README.t4240qds
@@ -0,0 +1,98 @@
+Overview
+--------
+The T4240QDS is a high-performance computing evaluation, development and test
+platform supporting the T4240 QorIQ™ Power Architecture™ processor. T4240QDS is
+optimized to support the high-bandwidth DDR3 memory ports, as well as the
+highly-configurable SerDes ports. The system is lead-free and RoHS-compliant.
+
+Board Features
+  SERDES Connections
+	32 lanes grouped into four 8-lane banks
+	Two “front side” banks dedicated to Ethernet
+		- High-speed crosspoint switch fabric on selected lanes
+		- Two PCI Express slots with side-band connector supporting
+		- SGMII
+		- XAUI
+		- HiGig
+		- I-pass connectors allow board-to-board and loopback support
+	Two “back side” banks dedicated to other protocols
+		- High-speed crosspoint switch fabric on all lanes
+		- Four PCI Express slots with side-band connector supporting
+		- PCI Express 3.0
+		- SATA 2.0
+		- SRIO 2.0
+		- Supports 4X Aurora debug with two connectors
+  DDR Controllers
+	Three independant 64-bit DDR3 controllers
+	Supports rates of 1866 up to 2133 MHz data-rate
+	Supports two DDR3/DDR3LP UDIMM/RDIMMs per controller
+	DDR power supplies 1.5V to all devices with automatic tracking of VTT.
+	Power software-switchable to 1.35V if software detects all DDR3LP devices.
+	MT9JSF25672AZ-2G1KZESZF has been tested at 1333, 1600, 1867, 2000 and
+	2133MT/s speeds. For 1867MT/s and above, read-to-write turnaround time
+	increases by 1 clock.
+
+  IFC/Local Bus
+	NAND flash: 8-bit, async or sync, up to 2GB.
+	NOR: 16-bit, Address/Data Multiplexed (ADM), up to 128 MB
+	NOR: 8-bit or 16-bit, non-multiplexed, up to 512MB
+		- NOR devices support 16 virtual banks
+	GASIC: Minimal target within Qixis FPGA
+	PromJET rapid memory download support
+	Address demultiplexing handled within FPGA.
+		- Flexible demux allows 8 or 16 bit evaluation.
+	IFC Debug/Development card
+		- Support for 32-bit devices
+  Ethernet
+	Support two on-board RGMII 10/100/1G ethernet ports.
+	SGMII and XAUI support via SERDES block (see above).
+	1588 support via Symmetricom board.
+  QIXIS System Logic FPGA
+	Manages system power and reset sequencing
+	Manages DUT, board, clock, etc. configuration for dynamic shmoo
+	Collects V-I-T data in background for code/power profiling.
+	Supports legacy TMT test features (POSt, IRS, SYSCLK-synchronous assertion)
+	General fault monitoring and logging
+	Runs from ATX “hot” power rails allowing operation while system is off.
+  Clocks
+	System and DDR clock (SYSCLK, “DDRCLK”)
+		- Switch selectable to one of 16 common settings in the interval 33MHz-166MHz.
+		- Software selectable in 1MHz increments from 1-200MHz.
+	SERDES clocks
+		- Provides clocks to all SerDes blocks and slots
+		- 100, 125 and 156.25 MHz
+  Power Supplies
+	Dedicated regulators for VDD
+		- Adjustable from (0.7V to 1.3V at 80A
+		- Regulators can be controlled by VID and/or software
+	Dedicated regulator for GVDD_PL: 1.35/1.5V at 22A
+		- VTT/MVREF automatically track operating voltage
+	Dedicated regulators/filters for AVDD supplies
+	Dedicated regulators for other supplies: OVDD, BVDD, DVDD, LVDD, POVDD, etc.
+  USB
+	Supports two USB 2.0 ports with integrated PHYs
+		- One type A, one type micro-AB with 1.0A power per port.
+  Other IO
+	eSDHC/MMC
+		- SDHC card slot
+	eSPI port
+		- High-speed serial flash
+	Two Serial port
+	Four I2C ports
+
+Memory map
+----------
+The addresses in brackets are physical addresses.
+
+0x0_0000_0000 (0x0_0000_0000) - 0x0_7fff_ffff   2GB DDR (more than 2GB is initialized but not mapped under with TLB)
+0x0_8000_0000 (0xc_0000_0000) - 0x0_dfff_ffff 1.5GB PCIE memory
+0x0_f000_0000 (0xf_0000_0000) - 0x0_f03f_ffff  4MB  DCSR
+0x0_f400_0000 (0xf_f400_0000) - 0x0_f5ff_ffff  32MB BMan
+0x0_f600_0000 (0xf_f600_0000) - 0x0_f7ff_ffff  32MB QMan
+0x0_f800_0000 (0xf_f800_0000) - 0x0_f803_ffff 256KB PCIE IO
+0x0_e000_0000 (0xf_e000_0000) - 0x0_efff_ffff 256MB NOR flash
+0x0_fe00_0000 (0xf_fe00_0000) - 0x0_feff_ffff  16MB CCSR
+0x0_ffdf_0000 (0xf_ffdf_0000) - 0x0_ffdf_03ff   4KB QIXIS
+0x0_ffff_f000 (0x0_7fff_fff0) - 0x0_ffff_ffff   4KB Boot page translation for secondary cores
+
+The physical address of the last (boot page translation) varies with the actual DDR size.
diff --git a/doc/driver-model/UDM-serial.txt b/doc/driver-model/UDM-serial.txt
index e9c274d..c6a8ab0 100644
--- a/doc/driver-model/UDM-serial.txt
+++ b/doc/driver-model/UDM-serial.txt
@@ -125,67 +125,59 @@
   -------------------
   No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
 
-  17) serial_lh7a40x.c
+  17) serial_max3100.c
   --------------------
   No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
 
-  18) serial_lpc2292.c
-  --------------------
-  No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
-
-  19) serial_max3100.c
-  --------------------
-  No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
-
-  20) serial_mxc.c
+  18) serial_mxc.c
   ----------------
   No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
 
-  21) serial_netarm.c
+  19) serial_netarm.c
   -------------------
   No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
 
-  22) serial_pl01x.c
+  20) serial_pl01x.c
   ------------------
   No support for CONFIG_SERIAL_MULTI. Simple conversion possible, though this
   driver in fact contains two drivers in total.
 
-  23) serial_pxa.c
+  21) serial_pxa.c
   ----------------
   This driver is a bit complicated, but due to clean support for
   CONFIG_SERIAL_MULTI, there are no expected obstructions throughout the
   conversion process.
 
-  24) serial_s3c24x0.c
+  22) serial_s3c24x0.c
   --------------------
   This driver, being quite ad-hoc might need some work to bring back to shape.
 
-  25) serial_s3c44b0.c
+  23) serial_s3c44b0.c
   --------------------
   No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
 
-  26) serial_s5p.c
+  24) serial_s5p.c
   ----------------
   No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
 
-  27) serial_sa1100.c
+  25) serial_sa1100.c
   -------------------
   No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
 
-  28) serial_sh.c
+  26) serial_sh.c
   ---------------
   No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
 
-  29) serial_xuartlite.c
+  27) serial_xuartlite.c
   ----------------------
   No support for CONFIG_SERIAL_MULTI. Simple conversion possible.
 
-  30) usbtty.c
+  28) usbtty.c
   ------------
   This driver seems very complicated and entangled with USB framework. The
   conversion might be complicated here.
 
-  31) arch/powerpc/cpu/mpc512x/serial.c
+  29) arch/powerpc/cpu/mpc512x/serial.c
   -------------------------------------
   This driver supports CONFIG_SERIAL_MULTI. This driver will need to be moved to
   proper place.
diff --git a/doc/git-mailrc b/doc/git-mailrc
index 7f60ef1..6600c15 100644
--- a/doc/git-mailrc
+++ b/doc/git-mailrc
@@ -30,6 +30,7 @@
 alias reinhardm      Reinhard Meyer <u-boot@emk-elektronik.de>
 alias sbabic         Stefano Babic <sbabic@denx.de>
 alias scottwood      Scott Wood <scottwood@freescale.com>
+alias sjg            Simon Glass <sjg@chromium.org>
 alias smcnutt        Scott McNutt <smcnutt@psyent.com>
 alias stroese        Stefan Roese <sr@denx.de>
 alias vapier         Mike Frysinger <vapier@gentoo.org>
@@ -50,7 +51,7 @@
 alias s3c            samsung
 alias s5pc           samsung
 alias samsung        uboot, prom
-alias tegra          uboot, Simon Glass <sjg@chromium.org>, Tom Warren <twarren@nvidia.com>, Stephen Warren <swarren@nvidia.com>
+alias tegra          uboot, sjg, Tom Warren <twarren@nvidia.com>, Stephen Warren <swarren@nvidia.com>
 alias tegra2         tegra
 alias ti             uboot, Tom Rini <trini@ti.com>
 
@@ -84,7 +85,7 @@
 alias ppc7xx         uboot, wd
 alias ppc74xx        uboot, wd
 
-alias sandbox        Simon Glass <sjg@chromium.org>
+alias sandbox        sjg
 alias sb             sandbox
 
 alias sparc          uboot, Daniel Hellstrom <daniel@gaisler.com>
@@ -92,7 +93,7 @@
 alias superh         uboot, iwamatsu
 alias sh             superh
 
-alias x86            uboot, gruss
+alias x86            uboot, sjg, gruss
 
 # Subsystem aliases
 alias cfi            uboot, stroese
diff --git a/drivers/block/ahci.c b/drivers/block/ahci.c
index 7b2ec50..8c785ae 100644
--- a/drivers/block/ahci.c
+++ b/drivers/block/ahci.c
@@ -37,11 +37,28 @@
 #include <linux/ctype.h>
 #include <ahci.h>
 
+static int ata_io_flush(u8 port);
+
 struct ahci_probe_ent *probe_ent = NULL;
 hd_driveid_t *ataid[AHCI_MAX_PORTS];
 
 #define writel_with_flush(a,b)	do { writel(a,b); readl(b); } while (0)
 
+/*
+ * Some controllers limit number of blocks they can read/write at once.
+ * Contemporary SSD devices work much faster if the read/write size is aligned
+ * to a power of 2.  Let's set default to 128 and allowing to be overwritten if
+ * needed.
+ */
+#ifndef MAX_SATA_BLOCKS_READ_WRITE
+#define MAX_SATA_BLOCKS_READ_WRITE	0x80
+#endif
+
+/* Maximum timeouts for each event */
+#define WAIT_MS_SPINUP	10000
+#define WAIT_MS_DATAIO	5000
+#define WAIT_MS_FLUSH	5000
+#define WAIT_MS_LINKUP	4
 
 static inline u32 ahci_port_base(u32 base, u32 port)
 {
@@ -60,7 +77,39 @@
 
 
 #define msleep(a) udelay(a * 1000)
-#define ssleep(a) msleep(a * 1000)
+
+static void ahci_dcache_flush_range(unsigned begin, unsigned len)
+{
+	const unsigned long start = begin;
+	const unsigned long end = start + len;
+
+	debug("%s: flush dcache: [%#lx, %#lx)\n", __func__, start, end);
+	flush_dcache_range(start, end);
+}
+
+/*
+ * SATA controller DMAs to physical RAM.  Ensure data from the
+ * controller is invalidated from dcache; next access comes from
+ * physical RAM.
+ */
+static void ahci_dcache_invalidate_range(unsigned begin, unsigned len)
+{
+	const unsigned long start = begin;
+	const unsigned long end = start + len;
+
+	debug("%s: invalidate dcache: [%#lx, %#lx)\n", __func__, start, end);
+	invalidate_dcache_range(start, end);
+}
+
+/*
+ * Ensure data for SATA controller is flushed out of dcache and
+ * written to physical memory.
+ */
+static void ahci_dcache_flush_sata_cmd(struct ahci_ioports *pp)
+{
+	ahci_dcache_flush_range((unsigned long)pp->cmd_slot,
+				AHCI_PORT_PRIV_DMA_SZ);
+}
 
 static int waiting_for_cmd_completed(volatile u8 *offset,
 				     int timeout_msec,
@@ -84,13 +133,15 @@
 	unsigned short vendor;
 #endif
 	volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
-	u32 tmp, cap_save;
+	u32 tmp, cap_save, cmd;
 	int i, j;
 	volatile u8 *port_mmio;
 
+	debug("ahci_host_init: start\n");
+
 	cap_save = readl(mmio + HOST_CAP);
 	cap_save &= ((1 << 28) | (1 << 17));
-	cap_save |= (1 << 27);
+	cap_save |= (1 << 27);  /* Staggered Spin-up. Not needed. */
 
 	/* global controller reset */
 	tmp = readl(mmio + HOST_CTL);
@@ -100,13 +151,15 @@
 	/* reset must complete within 1 second, or
 	 * the hardware should be considered fried.
 	 */
-	ssleep(1);
-
-	tmp = readl(mmio + HOST_CTL);
-	if (tmp & HOST_RESET) {
-		debug("controller reset failed (0x%x)\n", tmp);
-		return -1;
-	}
+	i = 1000;
+	do {
+		udelay(1000);
+		tmp = readl(mmio + HOST_CTL);
+		if (!i--) {
+			debug("controller reset failed (0x%x)\n", tmp);
+			return -1;
+		}
+	} while (tmp & HOST_RESET);
 
 	writel_with_flush(HOST_AHCI_EN, mmio + HOST_CTL);
 	writel(cap_save, mmio + HOST_CAP);
@@ -129,6 +182,9 @@
 	debug("cap 0x%x  port_map 0x%x  n_ports %d\n",
 	      probe_ent->cap, probe_ent->port_map, probe_ent->n_ports);
 
+	if (probe_ent->n_ports > CONFIG_SYS_SCSI_MAX_SCSI_ID)
+		probe_ent->n_ports = CONFIG_SYS_SCSI_MAX_SCSI_ID;
+
 	for (i = 0; i < probe_ent->n_ports; i++) {
 		probe_ent->port[i].port_mmio = ahci_port_base((u32) mmio, i);
 		port_mmio = (u8 *) probe_ent->port[i].port_mmio;
@@ -138,6 +194,7 @@
 		tmp = readl(port_mmio + PORT_CMD);
 		if (tmp & (PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
 			   PORT_CMD_FIS_RX | PORT_CMD_START)) {
+			debug("Port %d is active. Deactivating.\n", i);
 			tmp &= ~(PORT_CMD_LIST_ON | PORT_CMD_FIS_ON |
 				 PORT_CMD_FIS_RX | PORT_CMD_START);
 			writel_with_flush(tmp, port_mmio + PORT_CMD);
@@ -148,16 +205,53 @@
 			msleep(500);
 		}
 
-		writel(PORT_CMD_SPIN_UP, port_mmio + PORT_CMD);
+		/* Add the spinup command to whatever mode bits may
+		 * already be on in the command register.
+		 */
+		cmd = readl(port_mmio + PORT_CMD);
+		cmd |= PORT_CMD_FIS_RX;
+		cmd |= PORT_CMD_SPIN_UP;
+		writel_with_flush(cmd, port_mmio + PORT_CMD);
 
+		/* Bring up SATA link.
+		 * SATA link bringup time is usually less than 1 ms; only very
+		 * rarely has it taken between 1-2 ms. Never seen it above 2 ms.
+		 */
 		j = 0;
-		while (j < 100) {
-			msleep(10);
+		while (j < WAIT_MS_LINKUP) {
 			tmp = readl(port_mmio + PORT_SCR_STAT);
 			if ((tmp & 0xf) == 0x3)
 				break;
+			udelay(1000);
 			j++;
 		}
+		if (j == WAIT_MS_LINKUP) {
+			printf("SATA link %d timeout.\n", i);
+			continue;
+		} else {
+			debug("SATA link ok.\n");
+		}
+
+		/* Clear error status */
+		tmp = readl(port_mmio + PORT_SCR_ERR);
+		if (tmp)
+			writel(tmp, port_mmio + PORT_SCR_ERR);
+
+		debug("Spinning up device on SATA port %d... ", i);
+
+		j = 0;
+		while (j < WAIT_MS_SPINUP) {
+			tmp = readl(port_mmio + PORT_TFDATA);
+			if (!(tmp & (ATA_STAT_BUSY | ATA_STAT_DRQ)))
+				break;
+			udelay(1000);
+			j++;
+		}
+		printf("Target spinup took %d ms.\n", j);
+		if (j == WAIT_MS_SPINUP)
+			debug("timeout.\n");
+		else
+			debug("ok.\n");
 
 		tmp = readl(port_mmio + PORT_SCR_ERR);
 		debug("PORT_SCR_ERR 0x%x\n", tmp);
@@ -174,9 +268,9 @@
 		/* set irq mask (enables interrupts) */
 		writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
 
-		/*register linkup ports */
+		/* register linkup ports */
 		tmp = readl(port_mmio + PORT_SCR_STAT);
-		debug("Port %d status: 0x%x\n", i, tmp);
+		debug("SATA port %d status: 0x%x\n", i, tmp);
 		if ((tmp & 0xf) == 0x03)
 			probe_ent->link_port_map |= (0x01 << i);
 	}
@@ -202,12 +296,13 @@
 	u16 cc;
 #endif
 	volatile u8 *mmio = (volatile u8 *)probe_ent->mmio_base;
-	u32 vers, cap, impl, speed;
+	u32 vers, cap, cap2, impl, speed;
 	const char *speed_s;
 	const char *scc_s;
 
 	vers = readl(mmio + HOST_VERSION);
 	cap = probe_ent->cap;
+	cap2 = readl(mmio + HOST_CAP2);
 	impl = probe_ent->port_map;
 
 	speed = (cap >> 20) & 0xf;
@@ -215,6 +310,8 @@
 		speed_s = "1.5";
 	else if (speed == 2)
 		speed_s = "3";
+	else if (speed == 3)
+		speed_s = "6";
 	else
 		speed_s = "?";
 
@@ -240,8 +337,9 @@
 	       ((cap >> 8) & 0x1f) + 1, (cap & 0x1f) + 1, speed_s, impl, scc_s);
 
 	printf("flags: "
-	       "%s%s%s%s%s%s"
-	       "%s%s%s%s%s%s%s\n",
+	       "%s%s%s%s%s%s%s"
+	       "%s%s%s%s%s%s%s"
+	       "%s%s%s%s%s%s\n",
 	       cap & (1 << 31) ? "64bit " : "",
 	       cap & (1 << 30) ? "ncq " : "",
 	       cap & (1 << 28) ? "ilck " : "",
@@ -252,9 +350,16 @@
 	       cap & (1 << 19) ? "nz " : "",
 	       cap & (1 << 18) ? "only " : "",
 	       cap & (1 << 17) ? "pmp " : "",
+	       cap & (1 << 16) ? "fbss " : "",
 	       cap & (1 << 15) ? "pio " : "",
 	       cap & (1 << 14) ? "slum " : "",
-	       cap & (1 << 13) ? "part " : "");
+	       cap & (1 << 13) ? "part " : "",
+	       cap & (1 << 7) ? "ccc " : "",
+	       cap & (1 << 6) ? "ems " : "",
+	       cap & (1 << 5) ? "sxs " : "",
+	       cap2 & (1 << 2) ? "apst " : "",
+	       cap2 & (1 << 1) ? "nvmp " : "",
+	       cap2 & (1 << 0) ? "boh " : "");
 }
 
 #ifndef CONFIG_SCSI_AHCI_PLAT
@@ -277,8 +382,8 @@
 	probe_ent->pio_mask = 0x1f;
 	probe_ent->udma_mask = 0x7f;	/*Fixme,assume to support UDMA6 */
 
-	probe_ent->mmio_base = (u32)pci_map_bar(pdev, AHCI_PCI_BAR,
-						PCI_REGION_MEM);
+	pci_read_config_dword(pdev, PCI_BASE_ADDRESS_5, &probe_ent->mmio_base);
+	debug("ahci mmio_base=0x%08x\n", probe_ent->mmio_base);
 
 	/* Take from kernel:
 	 * JMicron-specific fixup:
@@ -342,6 +447,7 @@
 }
 
 
+#ifdef CONFIG_AHCI_SETFEATURES_XFER
 static void ahci_set_feature(u8 port)
 {
 	struct ahci_ioports *pp = &(probe_ent->port[port]);
@@ -349,23 +455,26 @@
 	u32 cmd_fis_len = 5;	/* five dwords */
 	u8 fis[20];
 
-	/*set feature */
-	memset(fis, 0, 20);
+	/* set feature */
+	memset(fis, 0, sizeof(fis));
 	fis[0] = 0x27;
 	fis[1] = 1 << 7;
 	fis[2] = ATA_CMD_SETF;
 	fis[3] = SETFEATURES_XFER;
 	fis[12] = __ilog2(probe_ent->udma_mask + 1) + 0x40 - 0x01;
 
-	memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
+	memcpy((unsigned char *)pp->cmd_tbl, fis, sizeof(fis));
 	ahci_fill_cmd_slot(pp, cmd_fis_len);
+	ahci_dcache_flush_sata_cmd(pp);
 	writel(1, port_mmio + PORT_CMD_ISSUE);
 	readl(port_mmio + PORT_CMD_ISSUE);
 
-	if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
-		printf("set feature error!\n");
+	if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+				WAIT_MS_DATAIO, 0x1)) {
+		printf("set feature error on port %d!\n", port);
 	}
 }
+#endif
 
 
 static int ahci_port_start(u8 port)
@@ -397,25 +506,27 @@
 	 * First item in chunk of DMA memory: 32-slot command table,
 	 * 32 bytes each in size
 	 */
-	pp->cmd_slot = (struct ahci_cmd_hdr *)mem;
-	debug("cmd_slot = %p\n", pp->cmd_slot);
+	pp->cmd_slot =
+		(struct ahci_cmd_hdr *)(uintptr_t)virt_to_phys((void *)mem);
+	debug("cmd_slot = 0x%x\n", (unsigned)pp->cmd_slot);
 	mem += (AHCI_CMD_SLOT_SZ + 224);
 
 	/*
 	 * Second item: Received-FIS area
 	 */
-	pp->rx_fis = mem;
+	pp->rx_fis = virt_to_phys((void *)mem);
 	mem += AHCI_RX_FIS_SZ;
 
 	/*
 	 * Third item: data area for storing a single command
 	 * and its scatter-gather table
 	 */
-	pp->cmd_tbl = mem;
+	pp->cmd_tbl = virt_to_phys((void *)mem);
 	debug("cmd_tbl_dma = 0x%x\n", pp->cmd_tbl);
 
 	mem += AHCI_CMD_TBL_HDR;
-	pp->cmd_tbl_sg = (struct ahci_sg *)mem;
+	pp->cmd_tbl_sg =
+			(struct ahci_sg *)(uintptr_t)virt_to_phys((void *)mem);
 
 	writel_with_flush((u32) pp->cmd_slot, port_mmio + PORT_LST_ADDR);
 
@@ -431,8 +542,8 @@
 }
 
 
-static int get_ahci_device_data(u8 port, u8 *fis, int fis_len, u8 *buf,
-				int buf_len)
+static int ahci_device_data_io(u8 port, u8 *fis, int fis_len, u8 *buf,
+				int buf_len, u8 is_write)
 {
 
 	struct ahci_ioports *pp = &(probe_ent->port[port]);
@@ -441,10 +552,10 @@
 	u32 port_status;
 	int sg_count;
 
-	debug("Enter get_ahci_device_data: for port %d\n", port);
+	debug("Enter %s: for port %d\n", __func__, port);
 
 	if (port > probe_ent->n_ports) {
-		printf("Invaild port number %d\n", port);
+		printf("Invalid port number %d\n", port);
 		return -1;
 	}
 
@@ -457,17 +568,22 @@
 	memcpy((unsigned char *)pp->cmd_tbl, fis, fis_len);
 
 	sg_count = ahci_fill_sg(port, buf, buf_len);
-	opts = (fis_len >> 2) | (sg_count << 16);
+	opts = (fis_len >> 2) | (sg_count << 16) | (is_write << 6);
 	ahci_fill_cmd_slot(pp, opts);
 
+	ahci_dcache_flush_sata_cmd(pp);
+	ahci_dcache_flush_range((unsigned)buf, (unsigned)buf_len);
+
 	writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
 
-	if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE, 150, 0x1)) {
+	if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+				WAIT_MS_DATAIO, 0x1)) {
 		printf("timeout exit!\n");
 		return -1;
 	}
-	debug("get_ahci_device_data: %d byte transferred.\n",
-	      pp->cmd_slot->status);
+
+	ahci_dcache_invalidate_range((unsigned)buf, (unsigned)buf_len);
+	debug("%s: %d byte transferred.\n", __func__, pp->cmd_slot->status);
 
 	return 0;
 }
@@ -526,7 +642,7 @@
 	if (pccb->datalen <= 35)
 		return 0;
 
-	memset(fis, 0, 20);
+	memset(fis, 0, sizeof(fis));
 	/* Construct the FIS */
 	fis[0] = 0x27;		/* Host to device FIS. */
 	fis[1] = 1 << 7;	/* Command FIS. */
@@ -537,8 +653,8 @@
 	if (!(tmpid = malloc(sizeof(hd_driveid_t))))
 		return -ENOMEM;
 
-	if (get_ahci_device_data(port, (u8 *) & fis, 20,
-				 tmpid, sizeof(hd_driveid_t))) {
+	if (ahci_device_data_io(port, (u8 *) &fis, sizeof(fis), tmpid,
+				sizeof(hd_driveid_t), 0)) {
 		debug("scsi_ahci: SCSI inquiry command failure.\n");
 		return -EIO;
 	}
@@ -557,46 +673,91 @@
 
 
 /*
- * SCSI READ10 command operation.
+ * SCSI READ10/WRITE10 command operation.
  */
-static int ata_scsiop_read10(ccb * pccb)
+static int ata_scsiop_read_write(ccb *pccb, u8 is_write)
 {
-	u32 len = 0;
+	u32 lba = 0;
+	u16 blocks = 0;
 	u8 fis[20];
+	u8 *user_buffer = pccb->pdata;
+	u32 user_buffer_size = pccb->datalen;
 
-	len = (((u32) pccb->cmd[7]) << 8) | ((u32) pccb->cmd[8]);
+	/* Retrieve the base LBA number from the ccb structure. */
+	memcpy(&lba, pccb->cmd + 2, sizeof(lba));
+	lba = be32_to_cpu(lba);
 
-	/* For 10-byte and 16-byte SCSI R/W commands, transfer
+	/*
+	 * And the number of blocks.
+	 *
+	 * For 10-byte and 16-byte SCSI R/W commands, transfer
 	 * length 0 means transfer 0 block of data.
 	 * However, for ATA R/W commands, sector count 0 means
 	 * 256 or 65536 sectors, not 0 sectors as in SCSI.
 	 *
 	 * WARNING: one or two older ATA drives treat 0 as 0...
 	 */
-	if (!len)
-		return 0;
-	memset(fis, 0, 20);
+	blocks = (((u16)pccb->cmd[7]) << 8) | ((u16) pccb->cmd[8]);
 
-	/* Construct the FIS */
-	fis[0] = 0x27;		/* Host to device FIS. */
-	fis[1] = 1 << 7;	/* Command FIS. */
-	fis[2] = ATA_CMD_RD_DMA;	/* Command byte. */
+	debug("scsi_ahci: %s %d blocks starting from lba 0x%x\n",
+	      is_write ?  "write" : "read", (unsigned)lba, blocks);
 
-	/* LBA address, only support LBA28 in this driver */
-	fis[4] = pccb->cmd[5];
-	fis[5] = pccb->cmd[4];
-	fis[6] = pccb->cmd[3];
-	fis[7] = (pccb->cmd[2] & 0x0f) | 0xe0;
+	/* Preset the FIS */
+	memset(fis, 0, sizeof(fis));
+	fis[0] = 0x27;		 /* Host to device FIS. */
+	fis[1] = 1 << 7;	 /* Command FIS. */
+	/* Command byte (read/write). */
+	fis[2] = is_write ? ATA_CMD_WRITE_EXT : ATA_CMD_READ_EXT;
 
-	/* Sector Count */
-	fis[12] = pccb->cmd[8];
-	fis[13] = pccb->cmd[7];
+	while (blocks) {
+		u16 now_blocks; /* number of blocks per iteration */
+		u32 transfer_size; /* number of bytes per iteration */
 
-	/* Read from ahci */
-	if (get_ahci_device_data(pccb->target, (u8 *) & fis, 20,
-				 pccb->pdata, pccb->datalen)) {
-		debug("scsi_ahci: SCSI READ10 command failure.\n");
-		return -EIO;
+		now_blocks = min(MAX_SATA_BLOCKS_READ_WRITE, blocks);
+
+		transfer_size = ATA_BLOCKSIZE * now_blocks;
+		if (transfer_size > user_buffer_size) {
+			printf("scsi_ahci: Error: buffer too small.\n");
+			return -EIO;
+		}
+
+		/* LBA48 SATA command but only use 32bit address range within
+		 * that. The next smaller command range (28bit) is too small.
+		 */
+		fis[4] = (lba >> 0) & 0xff;
+		fis[5] = (lba >> 8) & 0xff;
+		fis[6] = (lba >> 16) & 0xff;
+		fis[7] = 1 << 6; /* device reg: set LBA mode */
+		fis[8] = ((lba >> 24) & 0xff);
+		fis[3] = 0xe0; /* features */
+
+		/* Block (sector) count */
+		fis[12] = (now_blocks >> 0) & 0xff;
+		fis[13] = (now_blocks >> 8) & 0xff;
+
+		/* Read/Write from ahci */
+		if (ahci_device_data_io(pccb->target, (u8 *) &fis, sizeof(fis),
+					user_buffer, user_buffer_size,
+					is_write)) {
+			debug("scsi_ahci: SCSI %s10 command failure.\n",
+			      is_write ? "WRITE" : "READ");
+			return -EIO;
+		}
+
+		/* If this transaction is a write, do a following flush.
+		 * Writes in u-boot are so rare, and the logic to know when is
+		 * the last write and do a flush only there is sufficiently
+		 * difficult. Just do a flush after every write. This incurs,
+		 * usually, one extra flush when the rare writes do happen.
+		 */
+		if (is_write) {
+			if (-EIO == ata_io_flush(pccb->target))
+				return -EIO;
+		}
+		user_buffer += transfer_size;
+		user_buffer_size -= transfer_size;
+		blocks -= now_blocks;
+		lba += now_blocks;
 	}
 
 	return 0;
@@ -609,6 +770,7 @@
 static int ata_scsiop_read_capacity10(ccb *pccb)
 {
 	u32 cap;
+	u32 block_size;
 
 	if (!ataid[pccb->target]) {
 		printf("scsi_ahci: SCSI READ CAPACITY10 command failure. "
@@ -618,11 +780,52 @@
 	}
 
 	cap = le32_to_cpu(ataid[pccb->target]->lba_capacity);
+	if (cap == 0xfffffff) {
+		unsigned short *cap48 = ataid[pccb->target]->lba48_capacity;
+		if (cap48[2] || cap48[3]) {
+			cap = 0xffffffff;
+		} else {
+			cap = (le16_to_cpu(cap48[1]) << 16) |
+			      (le16_to_cpu(cap48[0]));
+		}
+	}
+
+	cap = cpu_to_be32(cap);
 	memcpy(pccb->pdata, &cap, sizeof(cap));
 
-	pccb->pdata[4] = pccb->pdata[5] = 0;
-	pccb->pdata[6] = 512 >> 8;
-	pccb->pdata[7] = 512 & 0xff;
+	block_size = cpu_to_be32((u32)512);
+	memcpy(&pccb->pdata[4], &block_size, 4);
+
+	return 0;
+}
+
+
+/*
+ * SCSI READ CAPACITY16 command operation.
+ */
+static int ata_scsiop_read_capacity16(ccb *pccb)
+{
+	u64 cap;
+	u64 block_size;
+
+	if (!ataid[pccb->target]) {
+		printf("scsi_ahci: SCSI READ CAPACITY16 command failure. "
+		       "\tNo ATA info!\n"
+		       "\tPlease run SCSI commmand INQUIRY firstly!\n");
+		return -EPERM;
+	}
+
+	cap = le32_to_cpu(ataid[pccb->target]->lba_capacity);
+	if (cap == 0xfffffff) {
+		memcpy(&cap, ataid[pccb->target]->lba48_capacity, sizeof(cap));
+		cap = le64_to_cpu(cap);
+	}
+
+	cap = cpu_to_be64(cap);
+	memcpy(pccb->pdata, &cap, sizeof(cap));
+
+	block_size = cpu_to_be64((u64)512);
+	memcpy(&pccb->pdata[8], &block_size, 8);
 
 	return 0;
 }
@@ -643,11 +846,17 @@
 
 	switch (pccb->cmd[0]) {
 	case SCSI_READ10:
-		ret = ata_scsiop_read10(pccb);
+		ret = ata_scsiop_read_write(pccb, 0);
 		break;
-	case SCSI_RD_CAPAC:
+	case SCSI_WRITE10:
+		ret = ata_scsiop_read_write(pccb, 1);
+		break;
+	case SCSI_RD_CAPAC10:
 		ret = ata_scsiop_read_capacity10(pccb);
 		break;
+	case SCSI_RD_CAPAC16:
+		ret = ata_scsiop_read_capacity16(pccb);
+		break;
 	case SCSI_TST_U_RDY:
 		ret = ata_scsiop_test_unit_ready(pccb);
 		break;
@@ -685,7 +894,9 @@
 				printf("Can not start port %d\n", i);
 				continue;
 			}
+#ifdef CONFIG_AHCI_SETFEATURES_XFER
 			ahci_set_feature((u8) i);
+#endif
 		}
 	}
 }
@@ -726,7 +937,9 @@
 				printf("Can not start port %d\n", i);
 				continue;
 			}
+#ifdef CONFIG_AHCI_SETFEATURES_XFER
 			ahci_set_feature((u8) i);
+#endif
 		}
 	}
 err_out:
@@ -734,6 +947,42 @@
 }
 #endif
 
+/*
+ * In the general case of generic rotating media it makes sense to have a
+ * flush capability. It probably even makes sense in the case of SSDs because
+ * one cannot always know for sure what kind of internal cache/flush mechanism
+ * is embodied therein. At first it was planned to invoke this after the last
+ * write to disk and before rebooting. In practice, knowing, a priori, which
+ * is the last write is difficult. Because writing to the disk in u-boot is
+ * very rare, this flush command will be invoked after every block write.
+ */
+static int ata_io_flush(u8 port)
+{
+	u8 fis[20];
+	struct ahci_ioports *pp = &(probe_ent->port[port]);
+	volatile u8 *port_mmio = (volatile u8 *)pp->port_mmio;
+	u32 cmd_fis_len = 5;	/* five dwords */
+
+	/* Preset the FIS */
+	memset(fis, 0, 20);
+	fis[0] = 0x27;		 /* Host to device FIS. */
+	fis[1] = 1 << 7;	 /* Command FIS. */
+	fis[2] = ATA_CMD_FLUSH_EXT;
+
+	memcpy((unsigned char *)pp->cmd_tbl, fis, 20);
+	ahci_fill_cmd_slot(pp, cmd_fis_len);
+	writel_with_flush(1, port_mmio + PORT_CMD_ISSUE);
+
+	if (waiting_for_cmd_completed(port_mmio + PORT_CMD_ISSUE,
+			WAIT_MS_FLUSH, 0x1)) {
+		debug("scsi_ahci: flush command timeout on port %d.\n", port);
+		return -EIO;
+	}
+
+	return 0;
+}
+
+
 void scsi_bus_reset(void)
 {
 	/*Not implement*/
diff --git a/drivers/block/fsl_sata.c b/drivers/block/fsl_sata.c
index fda3389..1f9d7b0 100644
--- a/drivers/block/fsl_sata.c
+++ b/drivers/block/fsl_sata.c
@@ -56,25 +56,6 @@
 		mdelay(1000);
 }
 
-void dprint_buffer(unsigned char *buf, int len)
-{
-	int i, j;
-
-	i = 0;
-	j = 0;
-	printf("\n\r");
-
-	for (i = 0; i < len; i++) {
-		printf("%02x ", *buf++);
-		j++;
-		if (j == 16) {
-			printf("\n\r");
-			j = 0;
-		}
-	}
-	printf("\n\r");
-}
-
 static void fsl_sata_dump_sfis(struct sata_fis_d2h *s)
 {
 	printf("Status FIS dump:\n\r");
@@ -94,7 +75,7 @@
 	printf("sector_count_exp:	%02x\n\r", s->sector_count_exp);
 }
 
-static int ata_wait_register(volatile unsigned *addr, u32 mask,
+static int ata_wait_register(unsigned __iomem *addr, u32 mask,
 			 u32 val, u32 timeout_msec)
 {
 	int i;
@@ -112,7 +93,7 @@
 	cmd_hdr_tbl_t *cmd_hdr;
 	u32 cda;
 	u32 val32;
-	fsl_sata_reg_t *reg;
+	fsl_sata_reg_t __iomem *reg;
 	u32 sig;
 	int i;
 	fsl_sata_t *sata;
@@ -287,42 +268,7 @@
 	return 0;
 }
 
-/* Hardware reset, like Power-on and COMRESET */
-void fsl_sata_hardware_reset(u32 reg_base)
-{
-	fsl_sata_reg_t *reg = (fsl_sata_reg_t *)reg_base;
-	u32 scontrol;
-
-	/* Disable the SATA interface and put PHY offline */
-	scontrol = in_le32(&reg->scontrol);
-	scontrol = (scontrol & 0x0f0) | 0x304;
-	out_le32(&reg->scontrol, scontrol);
-
-	/* No speed strict */
-	scontrol = in_le32(&reg->scontrol);
-	scontrol = scontrol & ~0x0f0;
-	out_le32(&reg->scontrol, scontrol);
-
-	/* Issue PHY wake/reset, Hardware_reset_asserted */
-	scontrol = in_le32(&reg->scontrol);
-	scontrol = (scontrol & 0x0f0) | 0x301;
-	out_le32(&reg->scontrol, scontrol);
-
-	mdelay(100);
-
-	/* Resume PHY, COMRESET negated, the device initialize hardware
-	 * and execute diagnostics, send good status-signature to host,
-	 * which is D2H register FIS, and then the device enter idle state.
-	 */
-	scontrol = in_le32(&reg->scontrol);
-	scontrol = (scontrol & 0x0f0) | 0x300;
-	out_le32(&reg->scontrol, scontrol);
-
-	mdelay(100);
-	return;
-}
-
-static void fsl_sata_dump_regs(fsl_sata_reg_t *reg)
+static void fsl_sata_dump_regs(fsl_sata_reg_t __iomem *reg)
 {
 	printf("\n\rSATA:           %08x\n\r", (u32)reg);
 	printf("CQR:            %08x\n\r", in_le32(&reg->cqr));
@@ -363,7 +309,7 @@
 	u32 prde_count;
 	u32 val32;
 	u32 ttl;
-	fsl_sata_reg_t *reg = sata->reg_base;
+	fsl_sata_reg_t __iomem *reg = sata->reg_base;
 	int i;
 
 	/* Check xfer length */
@@ -620,7 +566,7 @@
 	return blkcnt;
 }
 
-void fsl_sata_flush_cache(int dev)
+static void fsl_sata_flush_cache(int dev)
 {
 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 	struct sata_fis_h2d h2d, *cfis = &h2d;
@@ -664,7 +610,8 @@
 	return blkcnt;
 }
 
-u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write)
+static u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer,
+			       int is_write)
 {
 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 	struct sata_fis_h2d h2d, *cfis = &h2d;
@@ -707,7 +654,7 @@
 	return blkcnt;
 }
 
-void fsl_sata_flush_cache_ext(int dev)
+static void fsl_sata_flush_cache_ext(int dev)
 {
 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
 	struct sata_fis_h2d h2d, *cfis = &h2d;
@@ -721,12 +668,6 @@
 	fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0);
 }
 
-/* Software reset, set SRST of the Device Control register */
-void fsl_sata_software_reset(int dev)
-{
-	return;
-}
-
 static void fsl_sata_init_wcache(int dev, u16 *id)
 {
 	fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv;
@@ -757,7 +698,7 @@
 	return sata->flush_ext;
 }
 
-u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
+static u32 ata_low_level_rw_lba48(int dev, u32 blknr, lbaint_t blkcnt,
 		const void *buffer, int is_write)
 {
 	u32 start, blks;
@@ -792,8 +733,8 @@
 	return blkcnt;
 }
 
-u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt, const void *buffer,
-		int is_write)
+static u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt,
+				  const void *buffer, int is_write)
 {
 	u32 start, blks;
 	u8 *addr;
diff --git a/drivers/block/fsl_sata.h b/drivers/block/fsl_sata.h
index cecff68..a9c27bc 100644
--- a/drivers/block/fsl_sata.h
+++ b/drivers/block/fsl_sata.h
@@ -176,10 +176,11 @@
 * Command Header Entry
 */
 typedef struct cmd_hdr_entry {
-	u32 cda;		/* Command Descriptor Address, 4 bytes aligned */
-	u32 prde_fis_len;	/* Number of PRD entries and FIS length */
-	u32 ttl;		/* Total transfer length */
-	u32 attribute;		/* the attribute of command */
+	__le32 cda;		/* Command Descriptor Address,
+				   4 bytes aligned */
+	__le32 prde_fis_len;	/* Number of PRD entries and FIS length */
+	__le32 ttl;		/* Total transfer length */
+	__le32 attribute;	/* the attribute of command */
 } __attribute__ ((packed)) cmd_hdr_entry_t;
 
 #define SATA_HC_CMD_HDR_ENTRY_SIZE	sizeof(struct cmd_hdr_entry)
@@ -230,10 +231,10 @@
 * PRD entry - Physical Region Descriptor entry
 */
 typedef struct prd_entry {
-	u32 dba;	/* Data base address, 4 bytes aligned */
+	__le32 dba;	/* Data base address, 4 bytes aligned */
 	u32 res1;
 	u32 res2;
-	u32 ext_c_ddc;	/* Indirect PRD flags, snoop and data word count */
+	__le32 ext_c_ddc; /* Indirect PRD flags, snoop and data word count */
 } __attribute__ ((packed)) prd_entry_t;
 
 #define SATA_HC_CMD_DESC_PRD_SIZE	sizeof(struct prd_entry)
diff --git a/drivers/block/sata_sil.c b/drivers/block/sata_sil.c
index 245b872..b70f04d 100644
--- a/drivers/block/sata_sil.c
+++ b/drivers/block/sata_sil.c
@@ -27,6 +27,7 @@
 #include <fis.h>
 #include <sata.h>
 #include <libata.h>
+#include <sata.h>
 #include "sata_sil.h"
 
 /* Convert sectorsize to wordsize */
@@ -369,8 +370,8 @@
 	return blkcnt;
 }
 
-ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt,
-		const void *buffer, int is_write)
+static ulong sil_sata_rw_lba28(int dev, ulong blknr, lbaint_t blkcnt,
+			       const void *buffer, int is_write)
 {
 	ulong start, blks, max_blks;
 	u8 *addr;
@@ -397,8 +398,8 @@
 	return blkcnt;
 }
 
-ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt,
-		const void *buffer, int is_write)
+static ulong sil_sata_rw_lba48(int dev, ulong blknr, lbaint_t blkcnt,
+			       const void *buffer, int is_write)
 {
 	ulong start, blks, max_blks;
 	u8 *addr;
@@ -427,7 +428,7 @@
 	return blkcnt;
 }
 
-void sil_sata_cmd_flush_cache(int dev)
+static void sil_sata_cmd_flush_cache(int dev)
 {
 	struct sil_cmd_block cmdb, *pcmd = &cmdb;
 
@@ -439,7 +440,7 @@
 	sil_exec_cmd(dev, pcmd, 0);
 }
 
-void sil_sata_cmd_flush_cache_ext(int dev)
+static void sil_sata_cmd_flush_cache_ext(int dev)
 {
 	struct sil_cmd_block cmdb, *pcmd = &cmdb;
 
diff --git a/drivers/fpga/cyclon2.c b/drivers/fpga/cyclon2.c
index 26494a3..0773e73 100644
--- a/drivers/fpga/cyclon2.c
+++ b/drivers/fpga/cyclon2.c
@@ -144,6 +144,8 @@
 		}
 
 		/* Establish the initial state */
+		(*fn->config) (FALSE, TRUE, cookie);	/* De-assert nCONFIG */
+		udelay(100);
 		(*fn->config) (TRUE, TRUE, cookie);	/* Assert nCONFIG */
 
 		udelay(2);		/* T_cfg > 2us	*/
diff --git a/drivers/gpio/mpc83xx_gpio.c b/drivers/gpio/mpc83xx_gpio.c
index a9afcb2..e167852 100644
--- a/drivers/gpio/mpc83xx_gpio.c
+++ b/drivers/gpio/mpc83xx_gpio.c
@@ -163,7 +163,7 @@
 }
 
 /* Configure GPIO registers early */
-void mpc83xx_gpio_init_f()
+void mpc83xx_gpio_init_f(void)
 {
 	immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
 
@@ -187,7 +187,7 @@
 }
 
 /* Initialize GPIO soft-copies */
-void mpc83xx_gpio_init_r()
+void mpc83xx_gpio_init_r(void)
 {
 #if MPC83XX_GPIO_CTRLRS >= 1
 	gpio_output_value[0] = CONFIG_MPC83XX_GPIO_0_INIT_VALUE;
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c
index 5b017a9..3cb232f 100644
--- a/drivers/i2c/fsl_i2c.c
+++ b/drivers/i2c/fsl_i2c.c
@@ -214,7 +214,7 @@
 	return speed;
 }
 
-unsigned int get_i2c_clock(int bus)
+static unsigned int get_i2c_clock(int bus)
 {
 	if (bus)
 		return gd->i2c2_clk;	/* I2C2 clock */
diff --git a/drivers/i2c/sh_i2c.c b/drivers/i2c/sh_i2c.c
index 3147123..44ba90e 100644
--- a/drivers/i2c/sh_i2c.c
+++ b/drivers/i2c/sh_i2c.c
@@ -43,12 +43,18 @@
 #define SH_I2C_ICCR_SCP		(1 << 0)
 
 /* ICSR / ICIC */
-#define SH_IC_BUSY	(1 << 3)
+#define SH_IC_BUSY	(1 << 4)
 #define SH_IC_TACK	(1 << 2)
 #define SH_IC_WAIT	(1 << 1)
 #define SH_IC_DTE	(1 << 0)
 
-static u8 iccl, icch;
+#ifdef CONFIG_SH_I2C_8BIT
+/* store 8th bit of iccl and icch in ICIC register */
+#define SH_I2C_ICIC_ICCLB8	(1 << 7)
+#define SH_I2C_ICIC_ICCHB8	(1 << 6)
+#endif
+
+static u16 iccl, icch;
 
 #define IRQ_WAIT 1000
 
@@ -63,6 +69,20 @@
 	}
 }
 
+static int irq_dte_with_tack(struct sh_i2c *base)
+{
+	int i;
+
+	for (i = 0 ; i < IRQ_WAIT ; i++) {
+		if (SH_IC_DTE & readb(&base->icsr))
+			break;
+		if (SH_IC_TACK & readb(&base->icsr))
+			return -1;
+		udelay(10);
+	}
+	return 0;
+}
+
 static void irq_busy(struct sh_i2c *base)
 {
 	int i;
@@ -74,71 +94,97 @@
 	}
 }
 
-static void i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop)
+static int i2c_set_addr(struct sh_i2c *base, u8 id, u8 reg, int stop)
 {
-	writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr);
-	writeb(readb(&base->iccr) | SH_I2C_ICCR_ICE, &base->iccr);
+	u8 icic = SH_IC_TACK;
 
-	writeb(iccl, &base->iccl);
-	writeb(icch, &base->icch);
-	writeb(0, &base->icic);
+	clrbits_8(&base->iccr, SH_I2C_ICCR_ICE);
+	setbits_8(&base->iccr, SH_I2C_ICCR_ICE);
+
+	writeb(iccl & 0xff, &base->iccl);
+	writeb(icch & 0xff, &base->icch);
+#ifdef CONFIG_SH_I2C_8BIT
+	if (iccl > 0xff)
+		icic |= SH_I2C_ICIC_ICCLB8;
+	if (icch > 0xff)
+		icic |= SH_I2C_ICIC_ICCHB8;
+#endif
+	writeb(icic, &base->icic);
 
 	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr);
 	irq_dte(base);
 
+	clrbits_8(&base->icsr, SH_IC_TACK);
 	writeb(id << 1, &base->icdr);
-	irq_dte(base);
+	if (irq_dte_with_tack(base) != 0)
+		return -1;
 
 	writeb(reg, &base->icdr);
 	if (stop)
 		writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS), &base->iccr);
 
-	irq_dte(base);
+	if (irq_dte_with_tack(base) != 0)
+		return -1;
+	return 0;
 }
 
 static void i2c_finish(struct sh_i2c *base)
 {
 	writeb(0, &base->icsr);
-	writeb(readb(&base->iccr) & ~SH_I2C_ICCR_ICE, &base->iccr);
+	clrbits_8(&base->iccr, SH_I2C_ICCR_ICE);
 }
 
-static void i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val)
+static int i2c_raw_write(struct sh_i2c *base, u8 id, u8 reg, u8 val)
 {
-	i2c_set_addr(base, id, reg, 0);
+	int ret = -1;
+	if (i2c_set_addr(base, id, reg, 0) != 0)
+		goto exit0;
 	udelay(10);
 
 	writeb(val, &base->icdr);
-	irq_dte(base);
+	if (irq_dte_with_tack(base) != 0)
+		goto exit0;
 
 	writeb((SH_I2C_ICCR_ICE | SH_I2C_ICCR_RTS), &base->iccr);
-	irq_dte(base);
+	if (irq_dte_with_tack(base) != 0)
+		goto exit0;
 	irq_busy(base);
-
+	ret = 0;
+exit0:
 	i2c_finish(base);
+	return ret;
 }
 
-static u8 i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg)
+static int i2c_raw_read(struct sh_i2c *base, u8 id, u8 reg)
 {
-	u8 ret;
+	int ret = -1;
 
-	i2c_set_addr(base, id, reg, 1);
+#if defined(CONFIG_SH73A0)
+	if (i2c_set_addr(base, id, reg, 0) != 0)
+		goto exit0;
+#else
+	if (i2c_set_addr(base, id, reg, 1) != 0)
+		goto exit0;
 	udelay(100);
+#endif
 
 	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RTS|SH_I2C_ICCR_BUSY), &base->iccr);
 	irq_dte(base);
 
 	writeb(id << 1 | 0x01, &base->icdr);
-	irq_dte(base);
+	if (irq_dte_with_tack(base) != 0)
+		goto exit0;
 
 	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_SCP), &base->iccr);
-	irq_dte(base);
+	if (irq_dte_with_tack(base) != 0)
+		goto exit0;
 
-	ret = readb(&base->icdr);
+	ret = readb(&base->icdr) & 0xff;
 
 	writeb((SH_I2C_ICCR_ICE|SH_I2C_ICCR_RACK), &base->iccr);
 	readb(&base->icdr); /* Dummy read */
 	irq_busy(base);
-
+exit0:
 	i2c_finish(base);
 
 	return ret;
@@ -166,6 +212,21 @@
 	case 1:
 		base = (void *)CONFIG_SH_I2C_BASE1;
 		break;
+#ifdef CONFIG_SH_I2C_BASE2
+	case 2:
+		base = (void *)CONFIG_SH_I2C_BASE2;
+		break;
+#endif
+#ifdef CONFIG_SH_I2C_BASE3
+	case 3:
+		base = (void *)CONFIG_SH_I2C_BASE3;
+		break;
+#endif
+#ifdef CONFIG_SH_I2C_BASE4
+	case 4:
+		base = (void *)CONFIG_SH_I2C_BASE4;
+		break;
+#endif
 	default:
 		return -1;
 	}
@@ -206,18 +267,18 @@
 	denom = speed * (CONFIG_SH_I2C_DATA_HIGH + CONFIG_SH_I2C_DATA_LOW);
 	tmp = num * 10 / denom;
 	if (tmp % 10 >= 5)
-		iccl = (u8)((num/denom) + 1);
+		iccl = (u16)((num/denom) + 1);
 	else
-		iccl = (u8)(num/denom);
+		iccl = (u16)(num/denom);
 
 	/* Calculate the value for icch. From the data sheet:
 	   icch = (p clock / transfer rate) * (H / (L + H)) */
 	num = CONFIG_SH_I2C_CLOCK * CONFIG_SH_I2C_DATA_HIGH;
 	tmp = num * 10 / denom;
 	if (tmp % 10 >= 5)
-		icch = (u8)((num/denom) + 1);
+		icch = (u16)((num/denom) + 1);
 	else
-		icch = (u8)(num/denom);
+		icch = (u16)(num/denom);
 }
 
 /*
@@ -235,10 +296,14 @@
  */
 int i2c_read(u8 chip, u32 addr, int alen, u8 *buffer, int len)
 {
+	int ret;
 	int i = 0;
-	for (i = 0 ; i < len ; i++)
-		buffer[i] = i2c_raw_read(base, chip, addr + i);
-
+	for (i = 0 ; i < len ; i++) {
+		ret = i2c_raw_read(base, chip, addr + i);
+		if (ret < 0)
+			return -1;
+		buffer[i] = ret & 0xff;
+	}
 	return 0;
 }
 
@@ -259,8 +324,8 @@
 {
 	int i = 0;
 	for (i = 0; i < len ; i++)
-		i2c_raw_write(base, chip, addr + i, buffer[i]);
-
+		if (i2c_raw_write(base, chip, addr + i, buffer[i]) != 0)
+			return -1;
 	return 0;
 }
 
@@ -272,5 +337,9 @@
  */
 int i2c_probe(u8 chip)
 {
-	return 0;
+	int ret;
+
+	ret = i2c_set_addr(base, chip, 0, 1);
+	i2c_finish(base);
+	return ret;
 }
diff --git a/drivers/i2c/soft_i2c.c b/drivers/i2c/soft_i2c.c
index 36c6114..1595c07 100644
--- a/drivers/i2c/soft_i2c.c
+++ b/drivers/i2c/soft_i2c.c
@@ -41,9 +41,6 @@
 #ifdef	CONFIG_IXP425			/* only valid for IXP425 */
 #include <asm/arch/ixp425.h>
 #endif
-#ifdef CONFIG_LPC2292
-#include <asm/arch/hardware.h>
-#endif
 #if defined(CONFIG_MPC852T) || defined(CONFIG_MPC866)
 #include <asm/io.h>
 #endif
diff --git a/drivers/input/i8042.c b/drivers/input/i8042.c
index c3bc536..26958aa 100644
--- a/drivers/input/i8042.c
+++ b/drivers/input/i8042.c
@@ -26,6 +26,7 @@
 /* includes */
 
 #include <common.h>
+#include <linux/compiler.h>
 
 #ifdef CONFIG_USE_CPCIDVI
 extern u8 gt_cpcidvi_in8(u32 offset);
@@ -320,6 +321,54 @@
 	return in8(I8042_STATUS_REG) != 0xff;
 }
 
+/*
+ * Implement a weak default function for boards that optionally
+ * need to skip the i8042 initialization.
+ */
+int __weak board_i8042_skip(void)
+{
+	/* As default, don't skip */
+	return 0;
+}
+
+void i8042_flush(void)
+{
+	int timeout;
+
+	/*
+	 * The delay is to give the keyboard controller some time to fill the
+	 * next byte.
+	 */
+	while (1) {
+		timeout = 100;  /* wait for no longer than 100us */
+		while (timeout > 0 && !(in8(I8042_STATUS_REG) & 0x01)) {
+			udelay(1);
+			timeout--;
+		}
+
+		/* Try to pull next byte if not timeout. */
+		if (in8(I8042_STATUS_REG) & 0x01)
+			in8(I8042_DATA_REG);
+		else
+			break;
+	}
+}
+
+int i8042_disable(void)
+{
+	if (kbd_input_empty() == 0)
+		return -1;
+
+	/* Disable keyboard */
+	out8(I8042_COMMAND_REG, 0xad);
+
+	if (kbd_input_empty() == 0)
+		return -1;
+
+	return 0;
+}
+
+
 /*******************************************************************************
  *
  * i8042_kbd_init - reset keyboard and init state flags
@@ -329,7 +378,7 @@
 	int keymap, try;
 	char *penv;
 
-	if (!kbd_controller_present())
+	if (!kbd_controller_present() || board_i8042_skip())
 		return -1;
 
 #ifdef CONFIG_USE_CPCIDVI
@@ -607,11 +656,22 @@
 
 static int kbd_input_empty(void)
 {
-	int kbdTimeout = KBD_TIMEOUT;
+	int kbdTimeout = KBD_TIMEOUT * 1000;
 
-	/* wait for input buf empty */
-	while ((in8(I8042_STATUS_REG) & 0x02) && kbdTimeout--)
-		udelay(1000);
+	while ((in8(I8042_STATUS_REG) & I8042_STATUS_IN_DATA) && kbdTimeout--)
+		udelay(1);
+
+	return kbdTimeout != -1;
+}
+
+/******************************************************************************/
+
+static int wait_until_kbd_output_full(void)
+{
+	int kbdTimeout = KBD_TIMEOUT * 1000;
+
+	while (((in8(I8042_STATUS_REG) & 0x01) == 0) && kbdTimeout--)
+		udelay(1);
 
 	return kbdTimeout != -1;
 }
@@ -620,31 +680,39 @@
 
 static int kbd_reset(void)
 {
+	/* KB Reset */
 	if (kbd_input_empty() == 0)
 		return -1;
 
 	out8(I8042_DATA_REG, 0xff);
 
-	udelay(250000);
+	if (wait_until_kbd_output_full() == 0)
+		return -1;
+
+	if (in8(I8042_DATA_REG) != 0xfa) /* ACK */
+		return -1;
+
+	if (wait_until_kbd_output_full() == 0)
+		return -1;
+
+	if (in8(I8042_DATA_REG) != 0xaa) /* Test Pass*/
+		return -1;
 
 	if (kbd_input_empty() == 0)
 		return -1;
 
-#ifdef CONFIG_USE_CPCIDVI
+	/* Set KBC mode */
 	out8(I8042_COMMAND_REG, 0x60);
-#else
-	out8(I8042_DATA_REG, 0x60);
-#endif
 
 	if (kbd_input_empty() == 0)
 		return -1;
 
 	out8(I8042_DATA_REG, 0x45);
 
-
 	if (kbd_input_empty() == 0)
 		return -1;
 
+	/* Enable Keyboard */
 	out8(I8042_COMMAND_REG, 0xae);
 
 	if (kbd_input_empty() == 0)
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 5b2b4b0..04fa5f0 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -93,8 +93,24 @@
 	'\r', 0xff, 0xff
 };
 
+/*
+ * Scan key code to ANSI 3.64 escape sequence table.  This table is
+ * incomplete in that it does not include all possible extra keys.
+ */
+static struct {
+	int kbd_scan_code;
+	char *escape;
+} kbd_to_ansi364[] = {
+	{ KEY_UP, "\033[A"},
+	{ KEY_DOWN, "\033[B"},
+	{ KEY_RIGHT, "\033[C"},
+	{ KEY_LEFT, "\033[D"},
+};
 
-int input_queue_ascii(struct input_config *config, int ch)
+/* Maximum number of output characters that an ANSI sequence expands to */
+#define ANSI_CHAR_MAX	3
+
+static int input_queue_ascii(struct input_config *config, int ch)
 {
 	if (config->fifo_in + 1 == INPUT_BUFFER_LEN) {
 		if (!config->fifo_out)
@@ -289,24 +305,67 @@
 }
 
 /**
+ * Checks and converts a special key code into ANSI 3.64 escape sequence.
+ *
+ * @param config	Input state
+ * @param keycode	Key code to examine
+ * @param output_ch	Buffer to place output characters into. It should
+ *			be at least ANSI_CHAR_MAX bytes long, to allow for
+ *			an ANSI sequence.
+ * @param max_chars	Maximum number of characters to add to output_ch
+ * @return number of characters output, if the key was converted, otherwise 0.
+ *	This may be larger than max_chars, in which case the overflow
+ *	characters are not output.
+ */
+static int input_keycode_to_ansi364(struct input_config *config,
+		int keycode, char output_ch[], int max_chars)
+{
+	const char *escape;
+	int ch_count;
+	int i;
+
+	for (i = ch_count = 0; i < ARRAY_SIZE(kbd_to_ansi364); i++) {
+		if (keycode != kbd_to_ansi364[i].kbd_scan_code)
+			continue;
+		for (escape = kbd_to_ansi364[i].escape; *escape; escape++) {
+			if (ch_count < max_chars)
+				output_ch[ch_count] = *escape;
+			ch_count++;
+		}
+		return ch_count;
+	}
+
+	return 0;
+}
+
+/**
+ * Converts and queues a list of key codes in escaped ASCII string form
  * Convert a list of key codes into ASCII
  *
  * You must call input_check_keycodes() before this. It turns the keycode
- * list into a list of ASCII characters which are ready to send to the
- * input layer.
+ * list into a list of ASCII characters and sends them to the input layer.
  *
  * Characters which were seen last time do not generate fresh ASCII output.
+ * The output (calls to queue_ascii) may be longer than num_keycodes, if the
+ * keycode contains special keys that was encoded to longer escaped sequence.
  *
  * @param config	Input state
  * @param keycode	List of key codes to examine
  * @param num_keycodes	Number of key codes
+ * @param output_ch	Buffer to place output characters into. It should
+ *			be at last ANSI_CHAR_MAX * num_keycodes, to allow for
+ *			ANSI sequences.
+ * @param max_chars	Maximum number of characters to add to output_ch
  * @param same		Number of key codes which are the same
+ * @return number of characters written into output_ch, or -1 if we would
+ *	exceed max_chars chars.
  */
 static int input_keycodes_to_ascii(struct input_config *config,
-		int keycode[], int num_keycodes, char output_ch[], int same)
+		int keycode[], int num_keycodes, char output_ch[],
+		int max_chars, int same)
 {
 	struct input_key_xlate *table;
-	int ch_count;
+	int ch_count = 0;
 	int i;
 
 	table = &config->table[0];
@@ -321,19 +380,31 @@
 		}
 	}
 
-	/* now find normal keys */
-	for (i = ch_count = 0; i < num_keycodes; i++) {
+	/* Start conversion by looking for the first new keycode (by same). */
+	for (i = same; i < num_keycodes; i++) {
 		int key = keycode[i];
+		int ch = (key < table->num_entries) ? table->xlate[key] : 0xff;
 
-		if (key < table->num_entries && i >= same) {
-			int ch = table->xlate[key];
-
-			/* If a normal key with an ASCII value, add it! */
-			if (ch != 0xff)
-				output_ch[ch_count++] = (uchar)ch;
+		/*
+		 * For a normal key (with an ASCII value), add it; otherwise
+		 * translate special key to escape sequence if possible.
+		 */
+		if (ch != 0xff) {
+			if (ch_count < max_chars)
+				output_ch[ch_count] = (uchar)ch;
+			ch_count++;
+		} else {
+			ch_count += input_keycode_to_ansi364(config, key,
+						output_ch, max_chars);
 		}
 	}
 
+	if (ch_count > max_chars) {
+		debug("%s: Output char buffer overflow size=%d, need=%d\n",
+		      __func__, max_chars, ch_count);
+		return -1;
+	}
+
 	/* ok, so return keys */
 	return ch_count;
 }
@@ -341,7 +412,7 @@
 int input_send_keycodes(struct input_config *config,
 			int keycode[], int num_keycodes)
 {
-	char ch[num_keycodes];
+	char ch[num_keycodes * ANSI_CHAR_MAX];
 	int count, i, same = 0;
 	int is_repeat = 0;
 	unsigned delay_ms;
@@ -363,7 +434,7 @@
 	}
 
 	count = input_keycodes_to_ascii(config, keycode, num_keycodes,
-					ch, is_repeat ? 0 : same);
+					ch, sizeof(ch), is_repeat ? 0 : same);
 	for (i = 0; i < count; i++)
 		input_queue_ascii(config, ch[i]);
 	delay_ms = is_repeat ?
@@ -371,7 +442,8 @@
 			config->repeat_delay_ms;
 
 	config->next_repeat_ms = get_timer(0) + delay_ms;
-	return 0;
+
+	return count;
 }
 
 int input_add_table(struct input_config *config, int left_keycode,
diff --git a/drivers/mmc/Makefile b/drivers/mmc/Makefile
index 565ba6a..a1dd730 100644
--- a/drivers/mmc/Makefile
+++ b/drivers/mmc/Makefile
@@ -41,12 +41,12 @@
 COBJS-$(CONFIG_MXC_MMC) += mxcmmc.o
 COBJS-$(CONFIG_MXS_MMC) += mxsmmc.o
 COBJS-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
-COBJS-$(CONFIG_PXA_MMC) += pxa_mmc.o
 COBJS-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
 COBJS-$(CONFIG_SDHCI) += sdhci.o
 COBJS-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
 COBJS-$(CONFIG_SH_MMCIF) += sh_mmcif.o
 COBJS-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
+COBJS-$(CONFIG_DWMMC) += dw_mmc.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/drivers/mmc/dw_mmc.c b/drivers/mmc/dw_mmc.c
new file mode 100644
index 0000000..4070d4e
--- /dev/null
+++ b/drivers/mmc/dw_mmc.c
@@ -0,0 +1,385 @@
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ * Rajeshawari Shinde <rajeshwari.s@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,  MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <malloc.h>
+#include <mmc.h>
+#include <dwmmc.h>
+#include <asm/arch/clk.h>
+#include <asm-generic/errno.h>
+
+#define PAGE_SIZE 4096
+
+static int dwmci_wait_reset(struct dwmci_host *host, u32 value)
+{
+	unsigned long timeout = 1000;
+	u32 ctrl;
+
+	dwmci_writel(host, DWMCI_CTRL, value);
+
+	while (timeout--) {
+		ctrl = dwmci_readl(host, DWMCI_CTRL);
+		if (!(ctrl & DWMCI_RESET_ALL))
+			return 1;
+	}
+	return 0;
+}
+
+static void dwmci_set_idma_desc(struct dwmci_idmac *idmac,
+		u32 desc0, u32 desc1, u32 desc2)
+{
+	struct dwmci_idmac *desc = idmac;
+
+	desc->flags = desc0;
+	desc->cnt = desc1;
+	desc->addr = desc2;
+	desc->next_addr = (unsigned int)desc + sizeof(struct dwmci_idmac);
+}
+
+static void dwmci_prepare_data(struct dwmci_host *host,
+		struct mmc_data *data)
+{
+	unsigned long ctrl;
+	unsigned int i = 0, flags, cnt, blk_cnt;
+	ulong data_start, data_end, start_addr;
+	ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac, data->blocks);
+
+
+	blk_cnt = data->blocks;
+
+	dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET);
+
+	data_start = (ulong)cur_idmac;
+	dwmci_writel(host, DWMCI_DBADDR, (unsigned int)cur_idmac);
+
+	if (data->flags == MMC_DATA_READ)
+		start_addr = (unsigned int)data->dest;
+	else
+		start_addr = (unsigned int)data->src;
+
+	do {
+		flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ;
+		flags |= (i == 0) ? DWMCI_IDMAC_FS : 0;
+		if (blk_cnt <= 8) {
+			flags |= DWMCI_IDMAC_LD;
+			cnt = data->blocksize * blk_cnt;
+		} else
+			cnt = data->blocksize * 8;
+
+		dwmci_set_idma_desc(cur_idmac, flags, cnt,
+				start_addr + (i * PAGE_SIZE));
+
+		if(blk_cnt < 8)
+			break;
+		blk_cnt -= 8;
+		cur_idmac++;
+		i++;
+	} while(1);
+
+	data_end = (ulong)cur_idmac;
+	flush_dcache_range(data_start, data_end + ARCH_DMA_MINALIGN);
+
+	ctrl = dwmci_readl(host, DWMCI_CTRL);
+	ctrl |= DWMCI_IDMAC_EN | DWMCI_DMA_EN;
+	dwmci_writel(host, DWMCI_CTRL, ctrl);
+
+	ctrl = dwmci_readl(host, DWMCI_BMOD);
+	ctrl |= DWMCI_BMOD_IDMAC_FB | DWMCI_BMOD_IDMAC_EN;
+	dwmci_writel(host, DWMCI_BMOD, ctrl);
+
+	dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize);
+	dwmci_writel(host, DWMCI_BYTCNT, data->blocksize * data->blocks);
+}
+
+static int dwmci_set_transfer_mode(struct dwmci_host *host,
+		struct mmc_data *data)
+{
+	unsigned long mode;
+
+	mode = DWMCI_CMD_DATA_EXP;
+	if (data->flags & MMC_DATA_WRITE)
+		mode |= DWMCI_CMD_RW;
+
+	return mode;
+}
+
+static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+		struct mmc_data *data)
+{
+	struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
+	int flags = 0, i;
+	unsigned int timeout = 100000;
+	u32 retry = 10000;
+	u32 mask, ctrl;
+
+	while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
+		if (timeout == 0) {
+			printf("Timeout on data busy\n");
+			return TIMEOUT;
+		}
+		timeout--;
+	}
+
+	dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
+
+	if (data)
+		dwmci_prepare_data(host, data);
+
+
+	dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
+
+	if (data)
+		flags = dwmci_set_transfer_mode(host, data);
+
+	if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
+		return -1;
+
+	if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
+		flags |= DWMCI_CMD_ABORT_STOP;
+	else
+		flags |= DWMCI_CMD_PRV_DAT_WAIT;
+
+	if (cmd->resp_type & MMC_RSP_PRESENT) {
+		flags |= DWMCI_CMD_RESP_EXP;
+		if (cmd->resp_type & MMC_RSP_136)
+			flags |= DWMCI_CMD_RESP_LENGTH;
+	}
+
+	if (cmd->resp_type & MMC_RSP_CRC)
+		flags |= DWMCI_CMD_CHECK_CRC;
+
+	flags |= (cmd->cmdidx | DWMCI_CMD_START | DWMCI_CMD_USE_HOLD_REG);
+
+	debug("Sending CMD%d\n",cmd->cmdidx);
+
+	dwmci_writel(host, DWMCI_CMD, flags);
+
+	for (i = 0; i < retry; i++) {
+		mask = dwmci_readl(host, DWMCI_RINTSTS);
+		if (mask & DWMCI_INTMSK_CDONE) {
+			if (!data)
+				dwmci_writel(host, DWMCI_RINTSTS, mask);
+			break;
+		}
+	}
+
+	if (i == retry)
+		return TIMEOUT;
+
+	if (mask & DWMCI_INTMSK_RTO) {
+		debug("Response Timeout..\n");
+		return TIMEOUT;
+	} else if (mask & DWMCI_INTMSK_RE) {
+		debug("Response Error..\n");
+		return -1;
+	}
+
+
+	if (cmd->resp_type & MMC_RSP_PRESENT) {
+		if (cmd->resp_type & MMC_RSP_136) {
+			cmd->response[0] = dwmci_readl(host, DWMCI_RESP3);
+			cmd->response[1] = dwmci_readl(host, DWMCI_RESP2);
+			cmd->response[2] = dwmci_readl(host, DWMCI_RESP1);
+			cmd->response[3] = dwmci_readl(host, DWMCI_RESP0);
+		} else {
+			cmd->response[0] = dwmci_readl(host, DWMCI_RESP0);
+		}
+	}
+
+	if (data) {
+		do {
+			mask = dwmci_readl(host, DWMCI_RINTSTS);
+			if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
+				debug("DATA ERROR!\n");
+				return -1;
+			}
+		} while (!(mask & DWMCI_INTMSK_DTO));
+
+		dwmci_writel(host, DWMCI_RINTSTS, mask);
+
+		ctrl = dwmci_readl(host, DWMCI_CTRL);
+		ctrl &= ~(DWMCI_DMA_EN);
+		dwmci_writel(host, DWMCI_CTRL, ctrl);
+	}
+
+	udelay(100);
+
+	return 0;
+}
+
+static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
+{
+	u32 div, status;
+	int timeout = 10000;
+	unsigned long sclk;
+
+	if (freq == host->clock)
+		return 0;
+
+	/*
+	 * If host->mmc_clk didn't define,
+	 * then assume that host->bus_hz is source clock value.
+	 * host->bus_hz should be set from user.
+	 */
+	if (host->mmc_clk)
+		sclk = host->mmc_clk(host->dev_index);
+	else if (host->bus_hz)
+		sclk = host->bus_hz;
+	else {
+		printf("Didn't get source clock value..\n");
+		return -EINVAL;
+	}
+
+	div = DIV_ROUND_UP(sclk, 2 * freq);
+
+	dwmci_writel(host, DWMCI_CLKENA, 0);
+	dwmci_writel(host, DWMCI_CLKSRC, 0);
+
+	dwmci_writel(host, DWMCI_CLKDIV, div);
+	dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
+			DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
+
+	do {
+		status = dwmci_readl(host, DWMCI_CMD);
+		if (timeout-- < 0) {
+			printf("TIMEOUT error!!\n");
+			return -ETIMEDOUT;
+		}
+	} while (status & DWMCI_CMD_START);
+
+	dwmci_writel(host, DWMCI_CLKENA, DWMCI_CLKEN_ENABLE |
+			DWMCI_CLKEN_LOW_PWR);
+
+	dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
+			DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
+
+	timeout = 10000;
+	do {
+		status = dwmci_readl(host, DWMCI_CMD);
+		if (timeout-- < 0) {
+			printf("TIMEOUT error!!\n");
+			return -ETIMEDOUT;
+		}
+	} while (status & DWMCI_CMD_START);
+
+	host->clock = freq;
+
+	return 0;
+}
+
+static void dwmci_set_ios(struct mmc *mmc)
+{
+	struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
+	u32 ctype;
+
+	debug("Buswidth = %d, clock: %d\n",mmc->bus_width, mmc->clock);
+
+	dwmci_setup_bus(host, mmc->clock);
+	switch (mmc->bus_width) {
+	case 8:
+		ctype = DWMCI_CTYPE_8BIT;
+		break;
+	case 4:
+		ctype = DWMCI_CTYPE_4BIT;
+		break;
+	default:
+		ctype = DWMCI_CTYPE_1BIT;
+		break;
+	}
+
+	dwmci_writel(host, DWMCI_CTYPE, ctype);
+
+	if (host->clksel)
+		host->clksel(host);
+}
+
+static int dwmci_init(struct mmc *mmc)
+{
+	struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
+	u32 fifo_size, fifoth_val;
+
+	dwmci_writel(host, DWMCI_PWREN, 1);
+
+	if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) {
+		debug("%s[%d] Fail-reset!!\n",__func__,__LINE__);
+		return -1;
+	}
+
+	dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
+	dwmci_writel(host, DWMCI_INTMASK, 0);
+
+	dwmci_writel(host, DWMCI_TMOUT, 0xFFFFFFFF);
+
+	dwmci_writel(host, DWMCI_IDINTEN, 0);
+	dwmci_writel(host, DWMCI_BMOD, 1);
+
+	fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
+	if (host->fifoth_val)
+		fifoth_val = host->fifoth_val;
+	else
+		fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size/2 -1) |
+			TX_WMARK(fifo_size/2);
+	dwmci_writel(host, DWMCI_FIFOTH, fifoth_val);
+
+	dwmci_writel(host, DWMCI_CLKENA, 0);
+	dwmci_writel(host, DWMCI_CLKSRC, 0);
+
+	return 0;
+}
+
+int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk)
+{
+	struct mmc *mmc;
+	int err = 0;
+
+	mmc = malloc(sizeof(struct mmc));
+	if (!mmc) {
+		printf("mmc malloc fail!\n");
+		return -1;
+	}
+
+	mmc->priv = host;
+	host->mmc = mmc;
+
+	sprintf(mmc->name, "%s", host->name);
+	mmc->send_cmd = dwmci_send_cmd;
+	mmc->set_ios = dwmci_set_ios;
+	mmc->init = dwmci_init;
+	mmc->f_min = min_clk;
+	mmc->f_max = max_clk;
+
+	mmc->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
+
+	mmc->host_caps = host->caps;
+
+	if (host->buswidth == 8) {
+		mmc->host_caps |= MMC_MODE_8BIT;
+		mmc->host_caps &= ~MMC_MODE_4BIT;
+	} else {
+		mmc->host_caps |= MMC_MODE_4BIT;
+		mmc->host_caps &= ~MMC_MODE_8BIT;
+	}
+	mmc->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz | MMC_MODE_HC;
+
+	err = mmc_register(mmc);
+
+	return err;
+}
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c
index aa6a9f1..e93e38a 100644
--- a/drivers/mmc/fsl_esdhc.c
+++ b/drivers/mmc/fsl_esdhc.c
@@ -68,7 +68,7 @@
 };
 
 /* Return the XFERTYP flags for a given command and data packet */
-uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
+static uint esdhc_xfertyp(struct mmc_cmd *cmd, struct mmc_data *data)
 {
 	uint xfertyp = 0;
 
diff --git a/drivers/mmc/gen_atmel_mci.c b/drivers/mmc/gen_atmel_mci.c
index 4968c5e..67b2dbe 100644
--- a/drivers/mmc/gen_atmel_mci.c
+++ b/drivers/mmc/gen_atmel_mci.c
@@ -87,6 +87,11 @@
 		 | MMCI_BF(BLKLEN, blklen)
 		 | MMCI_BIT(RDPROOF)
 		 | MMCI_BIT(WRPROOF)), &mci->mr);
+	/*
+	 * On some new platforms BLKLEN in mci->mr is ignored.
+	 * Should use the BLKLEN in the block register.
+	 */
+	writel(MMCI_BF(BLKLEN, blklen), &mci->blkr);
 	initialized = 1;
 }
 
@@ -183,6 +188,12 @@
 	/* Figure out the transfer arguments */
 	cmdr = mci_encode_cmd(cmd, data, &error_flags);
 
+	/* For multi blocks read/write, set the block register */
+	if ((cmd->cmdidx == MMC_CMD_READ_MULTIPLE_BLOCK)
+			|| (cmd->cmdidx == MMC_CMD_WRITE_MULTIPLE_BLOCK))
+		writel(data->blocks | MMCI_BF(BLKLEN, mmc->read_bl_len),
+			&mci->blkr);
+
 	/* Send the command */
 	writel(cmd->cmdarg, &mci->argr);
 	writel(cmdr, &mci->cmdr);
@@ -310,8 +321,8 @@
 	writel(MMCI_BIT(MCIEN), &mci->cr);	/* enable mci */
 	writel(MMCI_BF(SCDSEL, MCI_BUS), &mci->sdcr);	/* select port */
 
-	/* Initial Time-outs */
-	writel(0x5f, &mci->dtor);
+	/* This delay can be optimized, but stick with max value */
+	writel(0x7f, &mci->dtor);
 	/* Disable Interrupts */
 	writel(~0UL, &mci->idr);
 
diff --git a/drivers/mmc/mmc.c b/drivers/mmc/mmc.c
index a60cfe1..5ffd8c5 100644
--- a/drivers/mmc/mmc.c
+++ b/drivers/mmc/mmc.c
@@ -47,104 +47,14 @@
 int board_mmc_getcd(struct mmc *mmc)__attribute__((weak,
 	alias("__board_mmc_getcd")));
 
-#ifdef CONFIG_MMC_BOUNCE_BUFFER
-static int mmc_bounce_need_bounce(struct mmc_data *orig)
-{
-	ulong addr, len;
-
-	if (orig->flags & MMC_DATA_READ)
-		addr = (ulong)orig->dest;
-	else
-		addr = (ulong)orig->src;
-
-	if (addr % ARCH_DMA_MINALIGN) {
-		debug("MMC: Unaligned data destination address %08lx!\n", addr);
-		return 1;
-	}
-
-	len = (ulong)(orig->blocksize * orig->blocks);
-	if (len % ARCH_DMA_MINALIGN) {
-		debug("MMC: Unaligned data destination length %08lx!\n", len);
-		return 1;
-	}
-
-	return 0;
-}
-
-static int mmc_bounce_buffer_start(struct mmc_data *backup,
-					struct mmc_data *orig)
-{
-	ulong origlen, len;
-	void *buffer;
-
-	if (!orig)
-		return 0;
-
-	if (!mmc_bounce_need_bounce(orig))
-		return 0;
-
-	memcpy(backup, orig, sizeof(struct mmc_data));
-
-	origlen = orig->blocksize * orig->blocks;
-	len = roundup(origlen, ARCH_DMA_MINALIGN);
-	buffer = memalign(ARCH_DMA_MINALIGN, len);
-	if (!buffer) {
-		puts("MMC: Error allocating MMC bounce buffer!\n");
-		return 1;
-	}
-
-	if (orig->flags & MMC_DATA_READ) {
-		orig->dest = buffer;
-	} else {
-		memcpy(buffer, orig->src, origlen);
-		orig->src = buffer;
-	}
-
-	return 0;
-}
-
-static void mmc_bounce_buffer_stop(struct mmc_data *backup,
-					struct mmc_data *orig)
-{
-	ulong len;
-
-	if (!orig)
-		return;
-
-	if (!mmc_bounce_need_bounce(backup))
-		return;
-
-	if (backup->flags & MMC_DATA_READ) {
-		len = backup->blocksize * backup->blocks;
-		memcpy(backup->dest, orig->dest, len);
-		free(orig->dest);
-		orig->dest = backup->dest;
-	} else {
-		free((void *)orig->src);
-		orig->src = backup->src;
-	}
-
-	return;
-
-}
-#else
-static inline int mmc_bounce_buffer_start(struct mmc_data *backup,
-					struct mmc_data *orig) { return 0; }
-static inline void mmc_bounce_buffer_stop(struct mmc_data *backup,
-					struct mmc_data *orig) { }
-#endif
-
-int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd, struct mmc_data *data)
+static int mmc_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
+			struct mmc_data *data)
 {
 	struct mmc_data backup;
 	int ret;
 
 	memset(&backup, 0, sizeof(backup));
 
-	ret = mmc_bounce_buffer_start(&backup, data);
-	if (ret)
-		return ret;
-
 #ifdef CONFIG_MMC_TRACE
 	int i;
 	u8 *ptr;
@@ -196,11 +106,10 @@
 #else
 	ret = mmc->send_cmd(mmc, cmd, data);
 #endif
-	mmc_bounce_buffer_stop(&backup, data);
 	return ret;
 }
 
-int mmc_send_status(struct mmc *mmc, int timeout)
+static int mmc_send_status(struct mmc *mmc, int timeout)
 {
 	struct mmc_cmd cmd;
 	int err, retries = 5;
@@ -244,7 +153,7 @@
 	return 0;
 }
 
-int mmc_set_blocklen(struct mmc *mmc, int len)
+static int mmc_set_blocklen(struct mmc *mmc, int len)
 {
 	struct mmc_cmd cmd;
 
@@ -437,7 +346,8 @@
 	return blkcnt;
 }
 
-int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start, lbaint_t blkcnt)
+static int mmc_read_blocks(struct mmc *mmc, void *dst, ulong start,
+			   lbaint_t blkcnt)
 {
 	struct mmc_cmd cmd;
 	struct mmc_data data;
@@ -507,7 +417,7 @@
 	return blkcnt;
 }
 
-int mmc_go_idle(struct mmc* mmc)
+static int mmc_go_idle(struct mmc *mmc)
 {
 	struct mmc_cmd cmd;
 	int err;
@@ -528,8 +438,7 @@
 	return 0;
 }
 
-int
-sd_send_op_cond(struct mmc *mmc)
+static int sd_send_op_cond(struct mmc *mmc)
 {
 	int timeout = 1000;
 	int err;
@@ -594,7 +503,7 @@
 	return 0;
 }
 
-int mmc_send_op_cond(struct mmc *mmc)
+static int mmc_send_op_cond(struct mmc *mmc)
 {
 	int timeout = 10000;
 	struct mmc_cmd cmd;
@@ -658,7 +567,7 @@
 }
 
 
-int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd)
+static int mmc_send_ext_csd(struct mmc *mmc, u8 *ext_csd)
 {
 	struct mmc_cmd cmd;
 	struct mmc_data data;
@@ -680,7 +589,7 @@
 }
 
 
-int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
+static int mmc_switch(struct mmc *mmc, u8 set, u8 index, u8 value)
 {
 	struct mmc_cmd cmd;
 	int timeout = 1000;
@@ -702,7 +611,7 @@
 
 }
 
-int mmc_change_freq(struct mmc *mmc)
+static int mmc_change_freq(struct mmc *mmc)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(u8, ext_csd, 512);
 	char cardtype;
@@ -772,7 +681,7 @@
 	return cd;
 }
 
-int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
+static int sd_switch(struct mmc *mmc, int mode, int group, u8 value, u8 *resp)
 {
 	struct mmc_cmd cmd;
 	struct mmc_data data;
@@ -793,7 +702,7 @@
 }
 
 
-int sd_change_freq(struct mmc *mmc)
+static int sd_change_freq(struct mmc *mmc)
 {
 	int err;
 	struct mmc_cmd cmd;
@@ -932,7 +841,7 @@
 	80,
 };
 
-void mmc_set_ios(struct mmc *mmc)
+static void mmc_set_ios(struct mmc *mmc)
 {
 	mmc->set_ios(mmc);
 }
@@ -950,14 +859,14 @@
 	mmc_set_ios(mmc);
 }
 
-void mmc_set_bus_width(struct mmc *mmc, uint width)
+static void mmc_set_bus_width(struct mmc *mmc, uint width)
 {
 	mmc->bus_width = width;
 
 	mmc_set_ios(mmc);
 }
 
-int mmc_startup(struct mmc *mmc)
+static int mmc_startup(struct mmc *mmc)
 {
 	int err, width;
 	uint mult, freq;
@@ -1105,7 +1014,7 @@
 	if (!IS_SD(mmc) && (mmc->version >= MMC_VERSION_4)) {
 		/* check  ext_csd version and capacity */
 		err = mmc_send_ext_csd(mmc, ext_csd);
-		if (!err & (ext_csd[EXT_CSD_REV] >= 2)) {
+		if (!err && (ext_csd[EXT_CSD_REV] >= 2)) {
 			/*
 			 * According to the JEDEC Standard, the value of
 			 * ext_csd's capacity is valid if the value is more
@@ -1240,7 +1149,7 @@
 	return 0;
 }
 
-int mmc_send_if_cond(struct mmc *mmc)
+static int mmc_send_if_cond(struct mmc *mmc)
 {
 	struct mmc_cmd cmd;
 	int err;
diff --git a/drivers/mmc/mmc_spi.c b/drivers/mmc/mmc_spi.c
index de43a85..11ba532 100644
--- a/drivers/mmc/mmc_spi.c
+++ b/drivers/mmc/mmc_spi.c
@@ -176,8 +176,8 @@
 	u8 r1;
 	int i;
 	int ret = 0;
-	debug("%s:cmd%d %x %x %x\n", __func__,
-	      cmd->cmdidx, cmd->resp_type, cmd->cmdarg, cmd->flags);
+	debug("%s:cmd%d %x %x\n", __func__,
+	      cmd->cmdidx, cmd->resp_type, cmd->cmdarg);
 	spi_claim_bus(spi);
 	spi_cs_activate(spi);
 	r1 = mmc_spi_sendcmd(mmc, cmd->cmdidx, cmd->cmdarg);
diff --git a/drivers/mmc/mxsmmc.c b/drivers/mmc/mxsmmc.c
index c80b41b..109acbf 100644
--- a/drivers/mmc/mxsmmc.c
+++ b/drivers/mmc/mxsmmc.c
@@ -42,6 +42,7 @@
 #include <asm/arch/imx-regs.h>
 #include <asm/arch/sys_proto.h>
 #include <asm/arch/dma.h>
+#include <bouncebuf.h>
 
 struct mxsmmc_priv {
 	int			id;
@@ -95,28 +96,33 @@
 static int mxsmmc_send_cmd_dma(struct mxsmmc_priv *priv, struct mmc_data *data)
 {
 	uint32_t data_count = data->blocksize * data->blocks;
-	uint32_t cache_data_count;
+	uint32_t cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN);
 	int dmach;
 	struct mxs_dma_desc *desc = priv->desc;
+	void *addr, *backup;
+	uint8_t flags;
 
 	memset(desc, 0, sizeof(struct mxs_dma_desc));
 	desc->address = (dma_addr_t)desc;
 
-	if (data_count % ARCH_DMA_MINALIGN)
-		cache_data_count = roundup(data_count, ARCH_DMA_MINALIGN);
-	else
-		cache_data_count = data_count;
-
 	if (data->flags & MMC_DATA_READ) {
 		priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_WRITE;
-		priv->desc->cmd.address = (dma_addr_t)data->dest;
+		addr = data->dest;
+		flags = GEN_BB_WRITE;
 	} else {
 		priv->desc->cmd.data = MXS_DMA_DESC_COMMAND_DMA_READ;
-		priv->desc->cmd.address = (dma_addr_t)data->src;
+		addr = (void *)data->src;
+		flags = GEN_BB_READ;
+	}
 
+	bounce_buffer_start(&addr, data_count, &backup, flags);
+
+	priv->desc->cmd.address = (dma_addr_t)addr;
+
+	if (data->flags & MMC_DATA_WRITE) {
 		/* Flush data to DRAM so DMA can pick them up */
-		flush_dcache_range((uint32_t)priv->desc->cmd.address,
-			(uint32_t)(priv->desc->cmd.address + cache_data_count));
+		flush_dcache_range((uint32_t)addr,
+			(uint32_t)(addr) + cache_data_count);
 	}
 
 	/* Invalidate the area, so no writeback into the RAM races with DMA */
@@ -128,15 +134,19 @@
 
 	dmach = MXS_DMA_CHANNEL_AHB_APBH_SSP0 + priv->id;
 	mxs_dma_desc_append(dmach, priv->desc);
-	if (mxs_dma_go(dmach))
+	if (mxs_dma_go(dmach)) {
+		bounce_buffer_stop(&addr, data_count, &backup, flags);
 		return COMM_ERR;
+	}
 
 	/* The data arrived into DRAM, invalidate cache over them */
 	if (data->flags & MMC_DATA_READ) {
-		invalidate_dcache_range((uint32_t)priv->desc->cmd.address,
-			(uint32_t)(priv->desc->cmd.address + cache_data_count));
+		invalidate_dcache_range((uint32_t)addr,
+			(uint32_t)(addr) + cache_data_count);
 	}
 
+	bounce_buffer_stop(&addr, data_count, &backup, flags);
+
 	return 0;
 }
 
diff --git a/drivers/mmc/pxa_mmc.c b/drivers/mmc/pxa_mmc.c
deleted file mode 100644
index 80c4445..0000000
--- a/drivers/mmc/pxa_mmc.c
+++ /dev/null
@@ -1,643 +0,0 @@
-/*
- * (C) Copyright 2003
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <common.h>
-#include <mmc.h>
-#include <asm/errno.h>
-#include <asm/arch/hardware.h>
-#include <part.h>
-#include <asm/io.h>
-
-#include "pxa_mmc.h"
-
-extern int fat_register_device(block_dev_desc_t * dev_desc, int part_no);
-
-static block_dev_desc_t mmc_dev;
-
-block_dev_desc_t *mmc_get_dev(int dev)
-{
-	return ((block_dev_desc_t *) & mmc_dev);
-}
-
-/*
- * FIXME needs to read cid and csd info to determine block size
- * and other parameters
- */
-static uchar mmc_buf[MMC_BLOCK_SIZE];
-static uchar spec_ver;
-static int mmc_ready = 0;
-static int wide = 0;
-
-static uint32_t *
-/****************************************************/
-mmc_cmd(ushort cmd, ushort argh, ushort argl, ushort cmdat)
-/****************************************************/
-{
-	static uint32_t resp[4], a, b, c;
-	uint32_t status;
-	int i;
-
-	debug("mmc_cmd %u 0x%04x 0x%04x 0x%04x\n", cmd, argh, argl,
-	      cmdat | wide);
-	writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
-	writel(~MMC_I_MASK_CLK_IS_OFF, MMC_I_MASK);
-	while (!(readl(MMC_I_REG) & MMC_I_REG_CLK_IS_OFF))
-		;
-	writel(cmd, MMC_CMD);
-	writel(argh, MMC_ARGH);
-	writel(argl, MMC_ARGL);
-	writel(cmdat | wide, MMC_CMDAT);
-	writel(~MMC_I_MASK_END_CMD_RES, MMC_I_MASK);
-	writel(MMC_STRPCL_START_CLK, MMC_STRPCL);
-	while (!(readl(MMC_I_REG) & MMC_I_REG_END_CMD_RES))
-		;
-
-	status = readl(MMC_STAT);
-	debug("MMC status 0x%08x\n", status);
-	if (status & MMC_STAT_TIME_OUT_RESPONSE) {
-		return 0;
-	}
-
-	/* Linux says:
-	 * Did I mention this is Sick.  We always need to
-	 * discard the upper 8 bits of the first 16-bit word.
-	 */
-	a = (readl(MMC_RES) & 0xffff);
-	for (i = 0; i < 4; i++) {
-		b = (readl(MMC_RES) & 0xffff);
-		c = (readl(MMC_RES) & 0xffff);
-		resp[i] = (a << 24) | (b << 8) | (c >> 8);
-		a = c;
-		debug("MMC resp[%d] = %#08x\n", i, resp[i]);
-	}
-
-	return resp;
-}
-
-int
-/****************************************************/
-mmc_block_read(uchar * dst, uint32_t src, int len)
-/****************************************************/
-{
-	ushort argh, argl;
-	ulong status;
-
-	if (len == 0) {
-		return 0;
-	}
-
-	debug("mmc_block_rd dst %p src %08x len %d\n", dst, src, len);
-
-	argh = len >> 16;
-	argl = len & 0xffff;
-
-	/* set block len */
-	mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, MMC_CMDAT_R1);
-
-	/* send read command */
-	argh = src >> 16;
-	argl = src & 0xffff;
-	writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
-	writel(0xffff, MMC_RDTO);
-	writel(1, MMC_NOB);
-	writel(len, MMC_BLKLEN);
-	mmc_cmd(MMC_CMD_READ_SINGLE_BLOCK, argh, argl,
-		MMC_CMDAT_R1 | MMC_CMDAT_READ | MMC_CMDAT_BLOCK |
-		MMC_CMDAT_DATA_EN);
-
-	writel(~MMC_I_MASK_RXFIFO_RD_REQ, MMC_I_MASK);
-	while (len) {
-		if (readl(MMC_I_REG) & MMC_I_REG_RXFIFO_RD_REQ) {
-#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-			int i;
-			for (i = min(len, 32); i; i--) {
-				*dst++ = readb(MMC_RXFIFO);
-				len--;
-			}
-#else
-			*dst++ = readb(MMC_RXFIFO);
-			len--;
-#endif
-		}
-		status = readl(MMC_STAT);
-		if (status & MMC_STAT_ERRORS) {
-			printf("MMC_STAT error %lx\n", status);
-			return -1;
-		}
-	}
-	writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK);
-	while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE))
-		;
-	status = readl(MMC_STAT);
-	if (status & MMC_STAT_ERRORS) {
-		printf("MMC_STAT error %lx\n", status);
-		return -1;
-	}
-	return 0;
-}
-
-int
-/****************************************************/
-mmc_block_write(ulong dst, uchar * src, int len)
-/****************************************************/
-{
-	ushort argh, argl;
-	ulong status;
-
-	if (len == 0) {
-		return 0;
-	}
-
-	debug("mmc_block_wr dst %lx src %lx len %d\n", dst, (ulong) src, len);
-
-	argh = len >> 16;
-	argl = len & 0xffff;
-
-	/* set block len */
-	mmc_cmd(MMC_CMD_SET_BLOCKLEN, argh, argl, MMC_CMDAT_R1);
-
-	/* send write command */
-	argh = dst >> 16;
-	argl = dst & 0xffff;
-	writel(MMC_STRPCL_STOP_CLK, MMC_STRPCL);
-	writel(1, MMC_NOB);
-	writel(len, MMC_BLKLEN);
-	mmc_cmd(MMC_CMD_WRITE_SINGLE_BLOCK, argh, argl,
-		MMC_CMDAT_R1 | MMC_CMDAT_WRITE | MMC_CMDAT_BLOCK |
-		MMC_CMDAT_DATA_EN);
-
-	writel(~MMC_I_MASK_TXFIFO_WR_REQ, MMC_I_MASK);
-	while (len) {
-		if (readl(MMC_I_REG) & MMC_I_REG_TXFIFO_WR_REQ) {
-			int i, bytes = min(32, len);
-
-			for (i = 0; i < bytes; i++) {
-				writel(*src++, MMC_TXFIFO);
-			}
-			if (bytes < 32) {
-				writel(MMC_PRTBUF_BUF_PART_FULL, MMC_PRTBUF);
-			}
-			len -= bytes;
-		}
-		status = readl(MMC_STAT);
-		if (status & MMC_STAT_ERRORS) {
-			printf("MMC_STAT error %lx\n", status);
-			return -1;
-		}
-	}
-	writel(~MMC_I_MASK_DATA_TRAN_DONE, MMC_I_MASK);
-	while (!(readl(MMC_I_REG) & MMC_I_REG_DATA_TRAN_DONE))
-		;
-	writel(~MMC_I_MASK_PRG_DONE, MMC_I_MASK);
-	while (!(readl(MMC_I_REG) & MMC_I_REG_PRG_DONE))
-		;
-	status = readl(MMC_STAT);
-	if (status & MMC_STAT_ERRORS) {
-		printf("MMC_STAT error %lx\n", status);
-		return -1;
-	}
-	return 0;
-}
-
-int
-/****************************************************/
-pxa_mmc_read(long src, uchar * dst, int size)
-/****************************************************/
-{
-	ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
-	ulong mmc_block_size, mmc_block_address;
-
-	if (size == 0) {
-		return 0;
-	}
-
-	if (!mmc_ready) {
-		printf("Please initial the MMC first\n");
-		return -1;
-	}
-
-	mmc_block_size = MMC_BLOCK_SIZE;
-	mmc_block_address = ~(mmc_block_size - 1);
-
-	src -= CONFIG_SYS_MMC_BASE;
-	end = src + size;
-	part_start = ~mmc_block_address & src;
-	part_end = ~mmc_block_address & end;
-	aligned_start = mmc_block_address & src;
-	aligned_end = mmc_block_address & end;
-
-	/* all block aligned accesses */
-	debug
-	    ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-	     src, (ulong) dst, end, part_start, part_end, aligned_start,
-	     aligned_end);
-	if (part_start) {
-		part_len = mmc_block_size - part_start;
-		debug
-		    ("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-		     src, (ulong) dst, end, part_start, part_end, aligned_start,
-		     aligned_end);
-		if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) <
-		    0) {
-			return -1;
-		}
-		memcpy(dst, mmc_buf + part_start, part_len);
-		dst += part_len;
-		src += part_len;
-	}
-	debug
-	    ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-	     src, (ulong) dst, end, part_start, part_end, aligned_start,
-	     aligned_end);
-	for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
-		debug
-		    ("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-		     src, (ulong) dst, end, part_start, part_end, aligned_start,
-		     aligned_end);
-		if ((mmc_block_read((uchar *) (dst), src, mmc_block_size)) < 0) {
-			return -1;
-		}
-	}
-	debug
-	    ("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-	     src, (ulong) dst, end, part_start, part_end, aligned_start,
-	     aligned_end);
-	if (part_end && src < end) {
-		debug
-		    ("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-		     src, (ulong) dst, end, part_start, part_end, aligned_start,
-		     aligned_end);
-		if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
-			return -1;
-		}
-		memcpy(dst, mmc_buf, part_end);
-	}
-	return 0;
-}
-
-int
-/****************************************************/
-pxa_mmc_write(uchar * src, uint32_t dst, int size)
-/****************************************************/
-{
-	ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
-	ulong mmc_block_size, mmc_block_address;
-
-	if (size == 0) {
-		return 0;
-	}
-
-	if (!mmc_ready) {
-		printf("Please initial the MMC first\n");
-		return -1;
-	}
-
-	mmc_block_size = MMC_BLOCK_SIZE;
-	mmc_block_address = ~(mmc_block_size - 1);
-
-	dst -= CONFIG_SYS_MMC_BASE;
-	end = dst + size;
-	part_start = ~mmc_block_address & dst;
-	part_end = ~mmc_block_address & end;
-	aligned_start = mmc_block_address & dst;
-	aligned_end = mmc_block_address & end;
-
-	/* all block aligned accesses */
-	debug
-	    ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-	     src, dst, end, part_start, part_end, aligned_start,
-	     aligned_end);
-	if (part_start) {
-		part_len = mmc_block_size - part_start;
-		debug
-		    ("ps src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-		     src, dst, end, part_start, part_end, aligned_start,
-		     aligned_end);
-		if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) <
-		    0) {
-			return -1;
-		}
-		memcpy(mmc_buf + part_start, src, part_len);
-		if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) <
-		    0) {
-			return -1;
-		}
-		dst += part_len;
-		src += part_len;
-	}
-	debug
-	    ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-	     src, dst, end, part_start, part_end, aligned_start,
-	     aligned_end);
-	for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
-		debug
-		    ("al src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-		     src, dst, end, part_start, part_end, aligned_start,
-		     aligned_end);
-		if ((mmc_block_write(dst, (uchar *) src, mmc_block_size)) < 0) {
-			return -1;
-		}
-	}
-	debug
-	    ("src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-	     src, dst, end, part_start, part_end, aligned_start,
-	     aligned_end);
-	if (part_end && dst < end) {
-		debug
-		    ("pe src %p dst %08x end %lx pstart %lx pend %lx astart %lx aend %lx\n",
-		     src, dst, end, part_start, part_end, aligned_start,
-		     aligned_end);
-		if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
-			return -1;
-		}
-		memcpy(mmc_buf, src, part_end);
-		if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) {
-			return -1;
-		}
-	}
-	return 0;
-}
-
-static ulong
-/****************************************************/
-mmc_bread(int dev_num, ulong blknr, lbaint_t blkcnt, void *dst)
-/****************************************************/
-{
-	int mmc_block_size = MMC_BLOCK_SIZE;
-	ulong src = blknr * mmc_block_size + CONFIG_SYS_MMC_BASE;
-
-	pxa_mmc_read(src, (uchar *) dst, blkcnt * mmc_block_size);
-	return blkcnt;
-}
-
-#ifdef __GNUC__
-#define likely(x)       __builtin_expect(!!(x), 1)
-#define unlikely(x)     __builtin_expect(!!(x), 0)
-#else
-#define likely(x)	(x)
-#define unlikely(x)	(x)
-#endif
-
-#define UNSTUFF_BITS(resp,start,size)					\
-	({								\
-		const int __size = size;				\
-		const uint32_t __mask = (__size < 32 ? 1 << __size : 0) - 1;	\
-		const int32_t __off = 3 - ((start) / 32);			\
-		const int32_t __shft = (start) & 31;			\
-		uint32_t __res;						\
-									\
-		__res = resp[__off] >> __shft;				\
-		if (__size + __shft > 32)				\
-			__res |= resp[__off-1] << ((32 - __shft) % 32);	\
-		__res & __mask;						\
-	})
-
-/*
- * Given the decoded CSD structure, decode the raw CID to our CID structure.
- */
-static void mmc_decode_cid(uint32_t * resp)
-{
-	if (IF_TYPE_SD == mmc_dev.if_type) {
-		/*
-		 * SD doesn't currently have a version field so we will
-		 * have to assume we can parse this.
-		 */
-		sprintf((char *)mmc_dev.vendor,
-			"Man %02x OEM %c%c \"%c%c%c%c%c\" Date %02u/%04u",
-			UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp, 112, 8),
-			UNSTUFF_BITS(resp, 104, 8), UNSTUFF_BITS(resp, 96, 8),
-			UNSTUFF_BITS(resp, 88, 8), UNSTUFF_BITS(resp, 80, 8),
-			UNSTUFF_BITS(resp, 72, 8), UNSTUFF_BITS(resp, 64, 8),
-			UNSTUFF_BITS(resp, 8, 4), UNSTUFF_BITS(resp, 12,
-							       8) + 2000);
-		sprintf((char *)mmc_dev.revision, "%d.%d",
-			UNSTUFF_BITS(resp, 60, 4), UNSTUFF_BITS(resp, 56, 4));
-		sprintf((char *)mmc_dev.product, "%u",
-			UNSTUFF_BITS(resp, 24, 32));
-	} else {
-		/*
-		 * The selection of the format here is based upon published
-		 * specs from sandisk and from what people have reported.
-		 */
-		switch (spec_ver) {
-		case 0:	/* MMC v1.0 - v1.2 */
-		case 1:	/* MMC v1.4 */
-			sprintf((char *)mmc_dev.vendor,
-				"Man %02x%02x%02x \"%c%c%c%c%c%c%c\" Date %02u/%04u",
-				UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp,
-									 112,
-									 8),
-				UNSTUFF_BITS(resp, 104, 8), UNSTUFF_BITS(resp,
-									 96, 8),
-				UNSTUFF_BITS(resp, 88, 8), UNSTUFF_BITS(resp,
-									80, 8),
-				UNSTUFF_BITS(resp, 72, 8), UNSTUFF_BITS(resp,
-									64, 8),
-				UNSTUFF_BITS(resp, 56, 8), UNSTUFF_BITS(resp,
-									48, 8),
-				UNSTUFF_BITS(resp, 12, 4), UNSTUFF_BITS(resp, 8,
-									4) +
-				1997);
-			sprintf((char *)mmc_dev.revision, "%d.%d",
-				UNSTUFF_BITS(resp, 44, 4), UNSTUFF_BITS(resp,
-									40, 4));
-			sprintf((char *)mmc_dev.product, "%u",
-				UNSTUFF_BITS(resp, 16, 24));
-			break;
-
-		case 2:	/* MMC v2.0 - v2.2 */
-		case 3:	/* MMC v3.1 - v3.3 */
-		case 4:	/* MMC v4 */
-			sprintf((char *)mmc_dev.vendor,
-				"Man %02x OEM %04x \"%c%c%c%c%c%c\" Date %02u/%04u",
-				UNSTUFF_BITS(resp, 120, 8), UNSTUFF_BITS(resp,
-									 104,
-									 16),
-				UNSTUFF_BITS(resp, 96, 8), UNSTUFF_BITS(resp,
-									88, 8),
-				UNSTUFF_BITS(resp, 80, 8), UNSTUFF_BITS(resp,
-									72, 8),
-				UNSTUFF_BITS(resp, 64, 8), UNSTUFF_BITS(resp,
-									56, 8),
-				UNSTUFF_BITS(resp, 12, 4), UNSTUFF_BITS(resp, 8,
-									4) +
-				1997);
-			sprintf((char *)mmc_dev.product, "%u",
-				UNSTUFF_BITS(resp, 16, 32));
-			sprintf((char *)mmc_dev.revision, "N/A");
-			break;
-
-		default:
-			printf("MMC card has unknown MMCA version %d\n",
-			       spec_ver);
-			break;
-		}
-	}
-	printf("%s card.\nVendor: %s\nProduct: %s\nRevision: %s\n",
-	       (IF_TYPE_SD == mmc_dev.if_type) ? "SD" : "MMC", mmc_dev.vendor,
-	       mmc_dev.product, mmc_dev.revision);
-}
-
-/*
- * Given a 128-bit response, decode to our card CSD structure.
- */
-static void mmc_decode_csd(uint32_t * resp)
-{
-	unsigned int mult, csd_struct;
-
-	if (IF_TYPE_SD == mmc_dev.if_type) {
-		csd_struct = UNSTUFF_BITS(resp, 126, 2);
-		if (csd_struct != 0) {
-			printf("SD: unrecognised CSD structure version %d\n",
-			       csd_struct);
-			return;
-		}
-	} else {
-		/*
-		 * We only understand CSD structure v1.1 and v1.2.
-		 * v1.2 has extra information in bits 15, 11 and 10.
-		 */
-		csd_struct = UNSTUFF_BITS(resp, 126, 2);
-		if (csd_struct != 1 && csd_struct != 2) {
-			printf("MMC: unrecognised CSD structure version %d\n",
-			       csd_struct);
-			return;
-		}
-
-		spec_ver = UNSTUFF_BITS(resp, 122, 4);
-		mmc_dev.if_type = IF_TYPE_MMC;
-	}
-
-	mult = 1 << (UNSTUFF_BITS(resp, 47, 3) + 2);
-	mmc_dev.lba = (1 + UNSTUFF_BITS(resp, 62, 12)) * mult;
-	mmc_dev.blksz = 1 << UNSTUFF_BITS(resp, 80, 4);
-
-	/* FIXME: The following just makes assumes that's the partition type -- should really read it */
-	mmc_dev.part_type = PART_TYPE_DOS;
-	mmc_dev.dev = 0;
-	mmc_dev.lun = 0;
-	mmc_dev.type = DEV_TYPE_HARDDISK;
-	mmc_dev.removable = 0;
-	mmc_dev.block_read = mmc_bread;
-
-	printf("Detected: %lu blocks of %lu bytes (%luMB) ",
-		mmc_dev.lba,
-		mmc_dev.blksz,
-		mmc_dev.lba * mmc_dev.blksz / (1024 * 1024));
-}
-
-int
-/****************************************************/
-mmc_legacy_init(int verbose)
-/****************************************************/
-{
-	int retries, rc = -ENODEV;
-	uint32_t cid_resp[4];
-	uint32_t *resp;
-	uint16_t rca = 0;
-
-	/* Reset device interface type */
-	mmc_dev.if_type = IF_TYPE_UNKNOWN;
-
-#ifdef CONFIG_CPU_MONAHANS	/* pxa3xx */
-	writel(readl(CKENA) | CKENA_12_MMC0 | CKENA_13_MMC1, CKENA);
-#else	/* pxa2xx */
-	writel(readl(CKEN) | CKEN12_MMC, CKEN);	/* enable MMC unit clock */
-#endif
-	writel(MMC_CLKRT_0_3125MHZ, MMC_CLKRT);
-	writel(MMC_RES_TO_MAX, MMC_RESTO);
-	writel(MMC_SPI_DISABLE, MMC_SPI);
-
-	/* reset */
-	mmc_cmd(MMC_CMD_GO_IDLE_STATE, 0, 0, MMC_CMDAT_INIT | MMC_CMDAT_R0);
-	udelay(200000);
-	retries = 3;
-	while (retries--) {
-		resp = mmc_cmd(MMC_CMD_APP_CMD, 0, 0, MMC_CMDAT_R1);
-		if (!(resp[0] & 0x00000020)) {	/* Card does not support APP_CMD */
-			debug("Card does not support APP_CMD\n");
-			break;
-		}
-
-		/* Select 3.2-3.3V and 3.3-3.4V */
-		resp = mmc_cmd(SD_CMD_APP_SEND_OP_COND, 0x0030, 0x0000,
-				MMC_CMDAT_R3 | (retries < 2 ? 0
-					: MMC_CMDAT_INIT));
-		if (resp[0] & 0x80000000) {
-			mmc_dev.if_type = IF_TYPE_SD;
-			debug("Detected SD card\n");
-			break;
-		}
-		udelay(200000);
-	}
-
-	if (retries <= 0 || !(IF_TYPE_SD == mmc_dev.if_type)) {
-		debug("Failed to detect SD Card, trying MMC\n");
-		resp =
-		    mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ff, 0x8000, MMC_CMDAT_R3);
-
-		retries = 10;
-		while (retries-- && resp && !(resp[0] & 0x80000000)) {
-			udelay(200000);
-			resp =
-			    mmc_cmd(MMC_CMD_SEND_OP_COND, 0x00ff, 0x8000,
-				    MMC_CMDAT_R3);
-		}
-	}
-
-	/* try to get card id */
-	resp =
-	    mmc_cmd(MMC_CMD_ALL_SEND_CID, 0, 0, MMC_CMDAT_R2 | MMC_CMDAT_BUSY);
-	if (resp) {
-		memcpy(cid_resp, resp, sizeof(cid_resp));
-
-		/* MMC exists, get CSD too */
-		resp = mmc_cmd(MMC_CMD_SET_RELATIVE_ADDR, 0, 0, MMC_CMDAT_R1);
-		if (IF_TYPE_SD == mmc_dev.if_type)
-			rca = ((resp[0] & 0xffff0000) >> 16);
-		resp = mmc_cmd(MMC_CMD_SEND_CSD, rca, 0, MMC_CMDAT_R2);
-		if (resp) {
-			mmc_decode_csd(resp);
-			rc = 0;
-			mmc_ready = 1;
-		}
-
-		mmc_decode_cid(cid_resp);
-	}
-
-	writel(0, MMC_CLKRT);		/* 20 MHz */
-	resp = mmc_cmd(MMC_CMD_SELECT_CARD, rca, 0, MMC_CMDAT_R1);
-
-#if defined(CONFIG_CPU_PXA27X) || defined(CONFIG_CPU_MONAHANS)
-	if (IF_TYPE_SD == mmc_dev.if_type) {
-		resp = mmc_cmd(MMC_CMD_APP_CMD, rca, 0, MMC_CMDAT_R1);
-		resp = mmc_cmd(SD_CMD_APP_SET_BUS_WIDTH, 0, 2, MMC_CMDAT_R1);
-		wide = MMC_CMDAT_SD_4DAT;
-	}
-#endif
-
-	fat_register_device(&mmc_dev, 1);	/* partitions start counting with 1 */
-
-	return rc;
-}
diff --git a/drivers/mmc/s5p_sdhci.c b/drivers/mmc/s5p_sdhci.c
index b978236..dc49d37 100644
--- a/drivers/mmc/s5p_sdhci.c
+++ b/drivers/mmc/s5p_sdhci.c
@@ -83,7 +83,8 @@
 	host->ioaddr = (void *)regbase;
 
 	host->quirks = SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_VOLTAGE |
-		SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR;
+		SDHCI_QUIRK_BROKEN_R1B | SDHCI_QUIRK_32BIT_DMA_ADDR |
+		SDHCI_QUIRK_WAIT_SEND_CMD;
 	host->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
 	host->version = sdhci_readw(host, SDHCI_HOST_VERSION);
 
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c
index 2e3c408..7845f87 100644
--- a/drivers/mmc/sdhci.c
+++ b/drivers/mmc/sdhci.c
@@ -82,8 +82,15 @@
 				unsigned int start_addr)
 {
 	unsigned int stat, rdy, mask, timeout, block = 0;
+#ifdef CONFIG_MMC_SDMA
+	unsigned char ctrl;
+	ctrl = sdhci_readl(host, SDHCI_HOST_CONTROL);
+	ctrl &= ~SDHCI_CTRL_DMA_MASK;
+	ctrl |= SDHCI_CTRL_SDMA;
+	sdhci_writel(host, ctrl, SDHCI_HOST_CONTROL);
+#endif
 
-	timeout = 10000;
+	timeout = 1000000;
 	rdy = SDHCI_INT_SPACE_AVAIL | SDHCI_INT_DATA_AVAIL;
 	mask = SDHCI_DATA_AVAILABLE | SDHCI_SPACE_AVAILABLE;
 	do {
@@ -233,6 +240,9 @@
 	if (!ret && data)
 		ret = sdhci_transfer_data(host, data, start_addr);
 
+	if (host->quirks & SDHCI_QUIRK_WAIT_SEND_CMD)
+		udelay(1000);
+
 	stat = sdhci_readl(host, SDHCI_INT_STATUS);
 	sdhci_writel(host, SDHCI_INT_ALL_MASK, SDHCI_INT_STATUS);
 	if (!ret) {
diff --git a/drivers/mtd/cfi_flash.c b/drivers/mtd/cfi_flash.c
index 43140f3..b2dfc53 100644
--- a/drivers/mtd/cfi_flash.c
+++ b/drivers/mtd/cfi_flash.c
@@ -752,8 +752,8 @@
  */
 static flash_sect_t find_sector (flash_info_t * info, ulong addr)
 {
-	static flash_sect_t saved_sector = 0; /* previously found sector */
-	static flash_info_t *saved_info = 0; /* previously used flash bank */
+	static flash_sect_t saved_sector; /* previously found sector */
+	static flash_info_t *saved_info; /* previously used flash bank */
 	flash_sect_t sector = saved_sector;
 
 	if ((info != saved_info) || (sector >= info->sector_count))
@@ -1147,8 +1147,9 @@
 			}
 
 			if (use_flash_status_poll(info)) {
-				cfiword_t cword = (cfiword_t)0xffffffffffffffffULL;
+				cfiword_t cword;
 				void *dest;
+				cword.ll = 0xffffffffffffffffULL;
 				dest = flash_map(info, sect, 0);
 				st = flash_status_poll(info, &cword, dest,
 						       info->erase_blk_tout, "erase");
@@ -1430,8 +1431,8 @@
 
 static int cfi_protect_bugfix(flash_info_t *info, long sector, int prot)
 {
-	if ((info->manufacturer_id == (uchar)INTEL_MANUFACT) &&
-		(info->device_id == NUMONYX_256MBIT)) {
+	if (info->manufacturer_id == ((INTEL_MANUFACT & FLASH_VENDMASK) >> 16)
+	    && info->device_id == NUMONYX_256MBIT) {
 		/*
 		 * see errata called
 		 * "Numonyx Axcell P33/P30 Specification Update" :)
@@ -1487,7 +1488,8 @@
 		case CFI_CMDSET_AMD_EXTENDED:
 		case CFI_CMDSET_AMD_STANDARD:
 			/* U-Boot only checks the first byte */
-			if (info->manufacturer_id == (uchar)ATM_MANUFACT) {
+			if (info->manufacturer_id ==
+			    ((ATM_MANUFACT & FLASH_VENDMASK) >> 16)) {
 				if (prot) {
 					flash_unlock_seq (info, 0);
 					flash_write_cmd (info, 0,
@@ -1505,7 +1507,8 @@
 							0, ATM_CMD_UNLOCK_SECT);
 				}
 			}
-			if (info->manufacturer_id == (uchar)AMD_MANUFACT) {
+			if (info->manufacturer_id ==
+			    ((AMD_MANUFACT & FLASH_VENDMASK) >> 16)) {
 				int flag = disable_interrupts();
 				int lock_flag;
 
@@ -1735,7 +1738,8 @@
 	flash_write_cmd(info, 0, info->cfi_offset, FLASH_CMD_CFI);
 
 #ifdef CONFIG_SYS_FLASH_PROTECTION
-	if (info->ext_addr && info->manufacturer_id == (uchar)AMD_MANUFACT) {
+	if (info->ext_addr && info->manufacturer_id ==
+	    ((AMD_MANUFACT & FLASH_VENDMASK) >> 16)) {
 		ushort spus;
 
 		/* read sector protect/unprotect scheme */
@@ -1854,7 +1858,7 @@
 		p[i] = flash_read_uchar(info, start + i);
 }
 
-void __flash_cmd_reset(flash_info_t *info)
+static void __flash_cmd_reset(flash_info_t *info)
 {
 	/*
 	 * We do not yet know what kind of commandset to use, so we issue
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index 71f5027..d3b71a5 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -2601,6 +2601,7 @@
 						  int *maf_id, int *dev_id,
 						  const struct nand_flash_dev *type)
 {
+	const char *name;
 	int i, maf_idx;
 	u8 id_data[8];
 	int ret;
@@ -2848,14 +2849,14 @@
 		chip->cmdfunc = nand_command_lp;
 
 	/* TODO onfi flash name */
-	MTDDEBUG (MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:"
-		" 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
-		nand_manuf_ids[maf_idx].name,
+	name = type->name;
 #ifdef CONFIG_SYS_NAND_ONFI_DETECTION
-		chip->onfi_version ? chip->onfi_params.model : type->name);
-#else
-		type->name);
+	if (chip->onfi_version)
+		name = chip->onfi_params.model;
 #endif
+	MTDDEBUG(MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:"
+		 " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, *dev_id,
+		 nand_manuf_ids[maf_idx].name, name);
 
 	return type;
 }
diff --git a/drivers/mtd/nand/nand_ecc.c b/drivers/mtd/nand/nand_ecc.c
index 81f0e08..097cf62 100644
--- a/drivers/mtd/nand/nand_ecc.c
+++ b/drivers/mtd/nand/nand_ecc.c
@@ -39,6 +39,7 @@
 
 #include <asm/errno.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand_ecc.h>
 
 /* The PPC4xx NDFC uses Smart Media (SMC) bytes order */
 #ifdef CONFIG_NAND_NDFC
diff --git a/drivers/mtd/nand/tegra_nand.c b/drivers/mtd/nand/tegra_nand.c
index 5408c51..4d94cc6 100644
--- a/drivers/mtd/nand/tegra_nand.c
+++ b/drivers/mtd/nand/tegra_nand.c
@@ -219,6 +219,34 @@
 }
 
 /**
+ * Read len bytes from the chip into a buffer
+ *
+ * @param mtd	MTD device structure
+ * @param buf	buffer to store data to
+ * @param len	number of bytes to read
+ *
+ * Read function for 8bit bus-width
+ */
+static void read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
+{
+	int i, s;
+	unsigned int reg;
+	struct nand_chip *chip = mtd->priv;
+	struct nand_drv *info = (struct nand_drv *)chip->priv;
+
+	for (i = 0; i < len; i += 4) {
+		s = (len - i) > 4 ? 4 : len - i;
+		writel(CMD_PIO | CMD_RX | CMD_A_VALID | CMD_CE0 |
+			((s - 1) << CMD_TRANS_SIZE_SHIFT) | CMD_GO,
+			&info->reg->command);
+		if (!nand_waitfor_cmd_completion(info->reg))
+			puts("Command timeout during read_buf\n");
+		reg = readl(&info->reg->resp);
+		memcpy(buf + i, &reg, s);
+	}
+}
+
+/**
  * Check NAND status to see if it is ready or not
  *
  * @param mtd	MTD device structure
@@ -317,6 +345,7 @@
 	switch (command) {
 	case NAND_CMD_READID:
 		writel(NAND_CMD_READID, &info->reg->cmd_reg1);
+		writel(column & 0xFF, &info->reg->addr_reg1);
 		writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_PIO
 			| CMD_RX |
 			((4 - 1) << CMD_TRANS_SIZE_SHIFT)
@@ -324,6 +353,12 @@
 			&info->reg->command);
 		info->pio_byte_index = 0;
 		break;
+	case NAND_CMD_PARAM:
+		writel(NAND_CMD_PARAM, &info->reg->cmd_reg1);
+		writel(column & 0xFF, &info->reg->addr_reg1);
+		writel(CMD_GO | CMD_CLE | CMD_ALE | CMD_CE0,
+			&info->reg->command);
+		break;
 	case NAND_CMD_READ0:
 		writel(NAND_CMD_READ0, &info->reg->cmd_reg1);
 		writel(NAND_CMD_READSTART, &info->reg->cmd_reg2);
@@ -976,6 +1011,7 @@
 	nand->options = LP_OPTIONS;
 	nand->cmdfunc = nand_command;
 	nand->read_byte = read_byte;
+	nand->read_buf = read_buf;
 	nand->ecc.read_page = nand_read_page_hwecc;
 	nand->ecc.write_page = nand_write_page_hwecc;
 	nand->ecc.read_page_raw = nand_read_page_raw;
diff --git a/drivers/mtd/ubi/crc32.c b/drivers/mtd/ubi/crc32.c
index a7e26b0..ab439b3 100644
--- a/drivers/mtd/ubi/crc32.c
+++ b/drivers/mtd/ubi/crc32.c
@@ -38,17 +38,9 @@
 #include "crc32defs.h"
 #define CRC_LE_BITS 8
 
-# define __force
-#ifndef __constant_cpu_to_le32
-#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
-#endif
-#ifndef __constant_le32_to_cpu
-#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
-#endif
-
 #if CRC_LE_BITS == 8
-#define tole(x) __constant_cpu_to_le32(x)
-#define tobe(x) __constant_cpu_to_be32(x)
+#define tole(x) cpu_to_le32(x)
+#define tobe(x) cpu_to_be32(x)
 #else
 #define tole(x) (x)
 #define tobe(x) (x)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index e4abac7..786a656 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -59,7 +59,6 @@
 COBJS-$(CONFIG_NATSEMI) += natsemi.o
 COBJS-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
 COBJS-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
-COBJS-$(CONFIG_DRIVER_NETARMETH) += netarm_eth.o
 COBJS-$(CONFIG_NETCONSOLE) += netconsole.o
 COBJS-$(CONFIG_NS8382X) += ns8382x.o
 COBJS-$(CONFIG_PCNET) += pcnet.o
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index cc57354..7a1fcdd 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -32,6 +32,10 @@
 COBJS-y += tgec.o
 COBJS-y += tgec_phy.o
 
+# Soc have FMAN v3 with mEMAC
+COBJS-$(CONFIG_SYS_FMAN_V3) += memac_phy.o
+COBJS-$(CONFIG_SYS_FMAN_V3) += memac.o
+
 # SoC specific SERDES support
 COBJS-$(CONFIG_P1017)	+= p1023.o
 COBJS-$(CONFIG_P1023)	+= p1023.o
@@ -40,6 +44,8 @@
 COBJS-$(CONFIG_PPC_P3041) += p5020.o
 COBJS-$(CONFIG_PPC_P4080) += p4080.o
 COBJS-$(CONFIG_PPC_P5020) += p5020.o
+COBJS-$(CONFIG_PPC_T4240) += t4240.o
+COBJS-$(CONFIG_PPC_B4860) += b4860.o
 endif
 
 COBJS	:= $(COBJS-y)
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 2b616ad..54b142f 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
  *	Dave Liu <daveliu@freescale.com>
  *
  * This program is free software; you can redistribute it and/or
@@ -28,6 +28,7 @@
 #include <phy.h>
 #include <asm/fsl_dtsec.h>
 #include <asm/fsl_tgec.h>
+#include <asm/fsl_memac.h>
 
 #include "fm.h"
 
@@ -45,8 +46,30 @@
 			TBICR_FULL_DUPLEX | TBICR_SPEED1_SET)
 
 /* Configure the TBI for SGMII operation */
-void dtsec_configure_serdes(struct fm_eth *priv)
+static void dtsec_configure_serdes(struct fm_eth *priv)
 {
+#ifdef CONFIG_SYS_FMAN_V3
+	u32 value;
+	struct mii_dev bus;
+	bus.priv = priv->mac->phyregs;
+
+	/* SGMII IF mode + AN enable */
+	value = PHY_SGMII_IF_MODE_AN | PHY_SGMII_IF_MODE_SGMII;
+	memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value);
+
+	/* Dev ability according to SGMII specification */
+	value = PHY_SGMII_DEV_ABILITY_SGMII;
+	memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, value);
+
+	/* Adjust link timer for SGMII  -
+	1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */
+	memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x3);
+	memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40);
+
+	/* Restart AN */
+	value = PHY_SGMII_CR_DEF_VAL | PHY_SGMII_CR_RESET_AN;
+	memac_mdio_write(&bus, 0, MDIO_DEVAD_NONE, 0, value);
+#else
 	struct dtsec *regs = priv->mac->base;
 	struct tsec_mii_mng *phyregs = priv->mac->phyregs;
 
@@ -60,15 +83,18 @@
 			TBIANA_SGMII_ACK);
 	tsec_local_mdio_write(phyregs, in_be32(&regs->tbipa), 0,
 			TBI_CR, TBICR_SETTINGS);
+#endif
 }
 
 static void dtsec_init_phy(struct eth_device *dev)
 {
 	struct fm_eth *fm_eth = dev->priv;
-	struct dtsec *regs = (struct dtsec *)fm_eth->mac->base;
+#ifndef CONFIG_SYS_FMAN_V3
+	struct dtsec *regs = (struct dtsec *)CONFIG_SYS_FSL_FM1_DTSEC1_ADDR;
 
 	/* Assign a Physical address to the TBI */
 	out_be32(&regs->tbipa, CONFIG_SYS_TBIPA_VALUE);
+#endif
 
 	if (fm_eth->enet_if == PHY_INTERFACE_MODE_SGMII)
 		dtsec_configure_serdes(fm_eth);
@@ -541,6 +567,10 @@
 
 	num = fm_eth->num;
 
+#ifdef CONFIG_SYS_FMAN_V3
+	base = &reg->memac[num].fm_memac;
+	phyregs = &reg->memac[num].fm_memac_mdio;
+#else
 	/* Get the mac registers base address */
 	if (fm_eth->type == FM_ETH_1G_E) {
 		base = &reg->mac_1g[num].fm_dtesc;
@@ -549,6 +579,7 @@
 		base = &reg->mac_10g[num].fm_10gec;
 		phyregs = &reg->mac_10g[num].fm_10gec_mdio;
 	}
+#endif
 
 	/* alloc mac controller */
 	mac = malloc(sizeof(struct fsl_enet_mac));
@@ -559,10 +590,14 @@
 	/* save the mac to fm_eth struct */
 	fm_eth->mac = mac;
 
+#ifdef CONFIG_SYS_FMAN_V3
+	init_memac(mac, base, phyregs, MAX_RXBUF_LEN);
+#else
 	if (fm_eth->type == FM_ETH_1G_E)
 		init_dtsec(mac, base, phyregs, MAX_RXBUF_LEN);
 	else
 		init_tgec(mac, base, phyregs, MAX_RXBUF_LEN);
+#endif
 
 	return 1;
 }
diff --git a/drivers/net/fm/init.c b/drivers/net/fm/init.c
index 736b8b9..ae389b8 100644
--- a/drivers/net/fm/init.c
+++ b/drivers/net/fm/init.c
@@ -38,6 +38,15 @@
 #if (CONFIG_SYS_NUM_FM1_DTSEC >= 5)
 	FM_DTSEC_INFO_INITIALIZER(1, 5),
 #endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 6)
+	FM_DTSEC_INFO_INITIALIZER(1, 6),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 7)
+	FM_DTSEC_INFO_INITIALIZER(1, 9),
+#endif
+#if (CONFIG_SYS_NUM_FM1_DTSEC >= 8)
+	FM_DTSEC_INFO_INITIALIZER(1, 10),
+#endif
 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 1)
 	FM_DTSEC_INFO_INITIALIZER(2, 1),
 #endif
@@ -53,6 +62,15 @@
 #if (CONFIG_SYS_NUM_FM2_DTSEC >= 5)
 	FM_DTSEC_INFO_INITIALIZER(2, 5),
 #endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 6)
+	FM_DTSEC_INFO_INITIALIZER(2, 6),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 7)
+	FM_DTSEC_INFO_INITIALIZER(2, 9),
+#endif
+#if (CONFIG_SYS_NUM_FM2_DTSEC >= 8)
+	FM_DTSEC_INFO_INITIALIZER(2, 10),
+#endif
 #if (CONFIG_SYS_NUM_FM1_10GEC >= 1)
 	FM_TGEC_INFO_INITIALIZER(1, 1),
 #endif
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
new file mode 100644
index 0000000..32c7054
--- /dev/null
+++ b/drivers/net/fm/memac.c
@@ -0,0 +1,132 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *	Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/* MAXFRM - maximum frame length */
+#define MAXFRM_MASK	0x0000ffff
+
+#include <common.h>
+#include <phy.h>
+#include <asm/types.h>
+#include <asm/io.h>
+#include <asm/fsl_enet.h>
+#include <asm/fsl_memac.h>
+
+#include "fm.h"
+
+static void memac_init_mac(struct fsl_enet_mac *mac)
+{
+	struct memac *regs = mac->base;
+
+	/* mask all interrupt */
+	out_be32(&regs->imask, IMASK_MASK_ALL);
+
+	/* clear all events */
+	out_be32(&regs->ievent, IEVENT_CLEAR_ALL);
+
+	/* set the max receive length */
+	out_be32(&regs->maxfrm, mac->max_rx_len & MAXFRM_MASK);
+
+	/* multicast frame reception for the hash entry disable */
+	out_be32(&regs->hashtable_ctrl, 0);
+}
+
+static void memac_enable_mac(struct fsl_enet_mac *mac)
+{
+	struct memac *regs = mac->base;
+
+	setbits_be32(&regs->command_config, MEMAC_CMD_CFG_RXTX_EN);
+}
+
+static void memac_disable_mac(struct fsl_enet_mac *mac)
+{
+	struct memac *regs = mac->base;
+
+	clrbits_be32(&regs->command_config, MEMAC_CMD_CFG_RXTX_EN);
+}
+
+static void memac_set_mac_addr(struct fsl_enet_mac *mac, u8 *mac_addr)
+{
+	struct memac *regs = mac->base;
+	u32 mac_addr0, mac_addr1;
+
+	/*
+	 * if a station address of 0x12345678ABCD, perform a write to
+	 * MAC_ADDR0 of 0x78563412, MAC_ADDR1 of 0x0000CDAB
+	 */
+	mac_addr0 = (mac_addr[3] << 24) | (mac_addr[2] << 16) | \
+			(mac_addr[1] << 8)  | (mac_addr[0]);
+	out_be32(&regs->mac_addr_0, mac_addr0);
+
+	mac_addr1 = ((mac_addr[5] << 8) | mac_addr[4]) & 0x0000ffff;
+	out_be32(&regs->mac_addr_1, mac_addr1);
+}
+
+static void memac_set_interface_mode(struct fsl_enet_mac *mac,
+					phy_interface_t type, int speed)
+{
+	/* Roy need more work here */
+
+	struct memac *regs = mac->base;
+	u32 if_mode, if_status;
+
+	/* clear all bits relative with interface mode */
+	if_mode = in_be32(&regs->if_mode);
+	if_status = in_be32(&regs->if_status);
+
+	/* set interface mode */
+	switch (type) {
+	case PHY_INTERFACE_MODE_GMII:
+		if_mode &= ~IF_MODE_MASK;
+		if_mode |= IF_MODE_GMII;
+		break;
+	case PHY_INTERFACE_MODE_RGMII:
+		if_mode |= (IF_MODE_GMII | IF_MODE_RG);
+		break;
+	case PHY_INTERFACE_MODE_RMII:
+		if_mode |= (IF_MODE_GMII | IF_MODE_RM);
+		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		if_mode &= ~IF_MODE_MASK;
+		if_mode |= (IF_MODE_GMII);
+		break;
+	default:
+		break;
+	}
+	/* Enable automatic speed selection */
+	if_mode |= IF_MODE_EN_AUTO;
+
+	debug(" %s, if_mode = %x\n", __func__,  if_mode);
+	debug(" %s, if_status = %x\n", __func__,  if_status);
+	out_be32(&regs->if_mode, if_mode);
+	return;
+}
+
+void init_memac(struct fsl_enet_mac *mac, void *base,
+		void *phyregs, int max_rx_len)
+{
+	mac->base = base;
+	mac->phyregs = phyregs;
+	mac->max_rx_len = max_rx_len;
+	mac->init_mac = memac_init_mac;
+	mac->enable_mac = memac_enable_mac;
+	mac->disable_mac = memac_disable_mac;
+	mac->set_mac_addr = memac_set_mac_addr;
+	mac->set_if_mode = memac_set_interface_mode;
+}
diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c
new file mode 100644
index 0000000..ea6118b
--- /dev/null
+++ b/drivers/net/fm/memac_phy.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *	Andy Fleming <afleming@freescale.com>
+ *	Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ * Some part is taken from tsec.c
+ */
+#include <common.h>
+#include <miiphy.h>
+#include <phy.h>
+#include <asm/io.h>
+#include <asm/fsl_memac.h>
+#include <fm_eth.h>
+
+/*
+ * Write value to the PHY for this device to the register at regnum, waiting
+ * until the write is done before it returns.  All PHY configuration has to be
+ * done through the TSEC1 MIIM regs
+ */
+int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+			int regnum, u16 value)
+{
+	u32 mdio_ctl;
+	struct memac_mdio_controller *regs = bus->priv;
+	u32 c45 = 1; /* Default to 10G interface */
+
+	if (dev_addr == MDIO_DEVAD_NONE) {
+		c45 = 0; /* clause 22 */
+		dev_addr = regnum & 0x1f;
+		clrbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+	} else {
+		setbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+		setbits_be32(&regs->mdio_stat, MDIO_STAT_HOLD_15_CLK);
+	}
+
+	/* Wait till the bus is free */
+	while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+		;
+
+	/* Set the port and dev addr */
+	mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+	out_be32(&regs->mdio_ctl, mdio_ctl);
+
+	/* Set the register address */
+	if (c45)
+		out_be32(&regs->mdio_addr, regnum & 0xffff);
+
+	/* Wait till the bus is free */
+	while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+		;
+
+	/* Write the value to the register */
+	out_be32(&regs->mdio_data, MDIO_DATA(value));
+
+	/* Wait till the MDIO write is complete */
+	while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+		;
+
+	return 0;
+}
+
+/*
+ * Reads from register regnum in the PHY for device dev, returning the value.
+ * Clears miimcom first.  All PHY configuration has to be done through the
+ * TSEC1 MIIM regs
+ */
+int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+			int regnum)
+{
+	u32 mdio_ctl;
+	struct memac_mdio_controller *regs = bus->priv;
+	u32 c45 = 1;
+
+	if (dev_addr == MDIO_DEVAD_NONE) {
+		c45 = 0; /* clause 22 */
+		dev_addr = regnum & 0x1f;
+		clrbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+	} else {
+		setbits_be32(&regs->mdio_stat, MDIO_STAT_ENC);
+		setbits_be32(&regs->mdio_stat, MDIO_STAT_HOLD_15_CLK);
+	}
+
+	/* Wait till the bus is free */
+	while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+		;
+
+	/* Set the Port and Device Addrs */
+	mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
+	out_be32(&regs->mdio_ctl, mdio_ctl);
+
+	/* Set the register address */
+	if (c45)
+		out_be32(&regs->mdio_addr, regnum & 0xffff);
+
+	/* Wait till the bus is free */
+	while ((in_be32(&regs->mdio_stat)) & MDIO_STAT_BSY)
+		;
+
+	/* Initiate the read */
+	mdio_ctl |= MDIO_CTL_READ;
+	out_be32(&regs->mdio_ctl, mdio_ctl);
+
+	/* Wait till the MDIO write is complete */
+	while ((in_be32(&regs->mdio_data)) & MDIO_DATA_BSY)
+		;
+
+	/* Return all Fs if nothing was there */
+	if (in_be32(&regs->mdio_stat) & MDIO_STAT_RD_ER)
+		return 0xffff;
+
+	return in_be32(&regs->mdio_data) & 0xffff;
+}
+
+int memac_mdio_reset(struct mii_dev *bus)
+{
+	return 0;
+}
+
+int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info)
+{
+	struct mii_dev *bus = mdio_alloc();
+
+	if (!bus) {
+		printf("Failed to allocate FM TGEC MDIO bus\n");
+		return -1;
+	}
+
+	bus->read = memac_mdio_read;
+	bus->write = memac_mdio_write;
+	bus->reset = memac_mdio_reset;
+	sprintf(bus->name, info->name);
+
+	bus->priv = info->regs;
+
+	return mdio_register(bus);
+}
diff --git a/drivers/net/fm/p1023.c b/drivers/net/fm/p1023.c
index 9765da5..387d2a3 100644
--- a/drivers/net/fm/p1023.c
+++ b/drivers/net/fm/p1023.c
@@ -23,7 +23,7 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_serdes.h>
 
-u32 port_to_devdisr[] = {
+static u32 port_to_devdisr[] = {
 	[FM1_DTSEC1] = MPC85xx_DEVDISR_TSEC1,
 	[FM1_DTSEC2] = MPC85xx_DEVDISR_TSEC2,
 };
diff --git a/drivers/net/fm/p4080.c b/drivers/net/fm/p4080.c
index 9dc6049..b04fd0f 100644
--- a/drivers/net/fm/p4080.c
+++ b/drivers/net/fm/p4080.c
@@ -23,7 +23,7 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_serdes.h>
 
-u32 port_to_devdisr[] = {
+static u32 port_to_devdisr[] = {
 	[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
 	[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
 	[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
diff --git a/drivers/net/fm/p5020.c b/drivers/net/fm/p5020.c
index a7a6e43..5391044 100644
--- a/drivers/net/fm/p5020.c
+++ b/drivers/net/fm/p5020.c
@@ -23,7 +23,7 @@
 #include <asm/immap_85xx.h>
 #include <asm/fsl_serdes.h>
 
-u32 port_to_devdisr[] = {
+static u32 port_to_devdisr[] = {
 	[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
 	[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
 	[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
diff --git a/drivers/net/fm/t4240.c b/drivers/net/fm/t4240.c
new file mode 100644
index 0000000..48c530c
--- /dev/null
+++ b/drivers/net/fm/t4240.c
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2012 Freescale Semiconductor, Inc.
+ *	Roy Zang <tie-fei.zang@freescale.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#include <common.h>
+#include <phy.h>
+#include <fm_eth.h>
+#include <asm/io.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_serdes.h>
+
+u32 port_to_devdisr[] = {
+	[FM1_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC1_1,
+	[FM1_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC1_2,
+	[FM1_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC1_3,
+	[FM1_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC1_4,
+	[FM1_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC1_5,
+	[FM1_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC1_6,
+	[FM1_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC1_9,
+	[FM1_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC1_10,
+	[FM1_10GEC1] = FSL_CORENET_DEVDISR2_10GEC1_1,
+	[FM1_10GEC2] = FSL_CORENET_DEVDISR2_10GEC1_2,
+	[FM2_DTSEC1] = FSL_CORENET_DEVDISR2_DTSEC2_1,
+	[FM2_DTSEC2] = FSL_CORENET_DEVDISR2_DTSEC2_2,
+	[FM2_DTSEC3] = FSL_CORENET_DEVDISR2_DTSEC2_3,
+	[FM2_DTSEC4] = FSL_CORENET_DEVDISR2_DTSEC2_4,
+	[FM2_DTSEC5] = FSL_CORENET_DEVDISR2_DTSEC2_5,
+	[FM2_DTSEC6] = FSL_CORENET_DEVDISR2_DTSEC2_6,
+	[FM2_DTSEC9] = FSL_CORENET_DEVDISR2_DTSEC2_9,
+	[FM2_DTSEC10] = FSL_CORENET_DEVDISR2_DTSEC2_10,
+	[FM2_10GEC1] = FSL_CORENET_DEVDISR2_10GEC2_1,
+	[FM2_10GEC2] = FSL_CORENET_DEVDISR2_10GEC2_2,
+};
+
+static int is_device_disabled(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 devdisr2 = in_be32(&gur->devdisr2);
+
+	return port_to_devdisr[port] & devdisr2;
+}
+
+void fman_disable_port(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	setbits_be32(&gur->devdisr2, port_to_devdisr[port]);
+}
+
+phy_interface_t fman_port_enet_if(enum fm_port port)
+{
+	ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+	u32 rcwsr13 = in_be32(&gur->rcwsr[13]);
+
+	if (is_device_disabled(port))
+		return PHY_INTERFACE_MODE_NONE;
+
+	if ((port == FM1_10GEC1 || port == FM1_10GEC2)
+			&& (is_serdes_configured(XAUI_FM1)))
+		return PHY_INTERFACE_MODE_XGMII;
+
+	if ((port == FM2_10GEC1 || port == FM2_10GEC2)
+			&& (is_serdes_configured(XAUI_FM2)))
+		return PHY_INTERFACE_MODE_XGMII;
+
+#define FSL_CORENET_RCWSR13_EC1			0x60000000 /* bits 417..418 */
+#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII	0x00000000
+#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO		0x40000000
+#define FSL_CORENET_RCWSR13_EC2			0x18000000 /* bits 419..420 */
+#define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII	0x00000000
+#define FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII	0x08000000
+#define FSL_CORENET_RCWSR13_EC2_FM1_GPIO		0x10000000
+	/* handle RGMII first */
+	if ((port == FM2_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC1) ==
+		FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII))
+		return PHY_INTERFACE_MODE_RGMII;
+
+	if ((port == FM1_DTSEC5) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+		FSL_CORENET_RCWSR13_EC2_FM1_DTSEC5_RGMII))
+		return PHY_INTERFACE_MODE_RGMII;
+
+	if ((port == FM2_DTSEC6) && ((rcwsr13 & FSL_CORENET_RCWSR13_EC2) ==
+		FSL_CORENET_RCWSR13_EC2_FM2_DTSEC6_RGMII))
+		return PHY_INTERFACE_MODE_RGMII;
+	switch (port) {
+	case FM1_DTSEC1:
+	case FM1_DTSEC2:
+	case FM1_DTSEC3:
+	case FM1_DTSEC4:
+	case FM1_DTSEC5:
+	case FM1_DTSEC6:
+	case FM1_DTSEC9:
+	case FM1_DTSEC10:
+		if (is_serdes_configured(SGMII_FM1_DTSEC1 + port - FM1_DTSEC1))
+			return PHY_INTERFACE_MODE_SGMII;
+		break;
+	case FM2_DTSEC1:
+	case FM2_DTSEC2:
+	case FM2_DTSEC3:
+	case FM2_DTSEC4:
+	case FM2_DTSEC5:
+	case FM2_DTSEC6:
+	case FM2_DTSEC9:
+	case FM2_DTSEC10:
+		if (is_serdes_configured(SGMII_FM2_DTSEC1 + port - FM2_DTSEC1))
+			return PHY_INTERFACE_MODE_SGMII;
+		break;
+	default:
+		return PHY_INTERFACE_MODE_NONE;
+	}
+
+	return PHY_INTERFACE_MODE_NONE;
+}
diff --git a/drivers/net/fm/tgec_phy.c b/drivers/net/fm/tgec_phy.c
index 2d349ad..2be69d7 100644
--- a/drivers/net/fm/tgec_phy.c
+++ b/drivers/net/fm/tgec_phy.c
@@ -30,8 +30,8 @@
  * until the write is done before it returns.  All PHY configuration has to be
  * done through the TSEC1 MIIM regs
  */
-int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
-			int regnum, u16 value)
+static int tgec_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+			   int regnum, u16 value)
 {
 	u32 mdio_ctl;
 	u32 stat_val;
@@ -72,8 +72,8 @@
  * Clears miimcom first.  All PHY configuration has to be done through the
  * TSEC1 MIIM regs
  */
-int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
-			int regnum)
+static int tgec_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+			  int regnum)
 {
 	u32 mdio_ctl;
 	u32 stat_val;
@@ -114,7 +114,7 @@
 	return in_be32(&regs->mdio_data) & 0xffff;
 }
 
-int tgec_mdio_reset(struct mii_dev *bus)
+static int tgec_mdio_reset(struct mii_dev *bus)
 {
 	return 0;
 }
diff --git a/drivers/net/macb.c b/drivers/net/macb.c
index 0e1ced7..8bacbda 100644
--- a/drivers/net/macb.c
+++ b/drivers/net/macb.c
@@ -51,8 +51,6 @@
 
 #include "macb.h"
 
-#define barrier() asm volatile("" ::: "memory")
-
 #define CONFIG_SYS_MACB_RX_BUFFER_SIZE		4096
 #define CONFIG_SYS_MACB_RX_RING_SIZE		(CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128)
 #define CONFIG_SYS_MACB_TX_RING_SIZE		16
diff --git a/drivers/net/mcfmii.c b/drivers/net/mcfmii.c
index 471c5ef..5e64dbd 100644
--- a/drivers/net/mcfmii.c
+++ b/drivers/net/mcfmii.c
@@ -315,13 +315,11 @@
 int mcffec_miiphy_write(const char *devname, unsigned char addr, unsigned char reg,
 			unsigned short value)
 {
-	short rdreg;		/* register working value */
-
 #ifdef MII_DEBUG
 	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
 #endif
 
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
+	mii_send(mk_mii_write(addr, reg, value));
 
 #ifdef MII_DEBUG
 	printf("0x%04x\n", value);
diff --git a/drivers/net/netarm_eth.c b/drivers/net/netarm_eth.c
deleted file mode 100644
index 325f16c..0000000
--- a/drivers/net/netarm_eth.c
+++ /dev/null
@@ -1,352 +0,0 @@
-/*
- * Copyright (C) 2004 IMMS gGmbH <www.imms.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * author(s): Thomas Elste, <info@elste.org>
- *            (some parts derived from uCLinux Netarm Ethernet Driver)
- */
-
-
-#include <common.h>
-#include <command.h>
-#include <net.h>
-#include "netarm_eth.h"
-#include <asm/arch/netarm_registers.h>
-
-static int na_mii_poll_busy (void);
-
-static void na_get_mac_addr (void)
-{
-	unsigned short p[3];
-	char *m_addr;
-	char ethaddr[20];
-
-	m_addr = (char *) p;
-
-	p[0] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_1);
-	p[1] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_2);
-	p[2] = (unsigned short) GET_EADDR (NETARM_ETH_SAL_STATION_ADDR_3);
-
-	sprintf (ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
-		 m_addr[0], m_addr[1],
-		 m_addr[2], m_addr[3], m_addr[4], m_addr[5]);
-
-	printf ("HW-MAC Address:  %s\n", ethaddr);
-
-	/* set env, todo: check if already an adress is set */
-	setenv ("ethaddr", ethaddr);
-}
-
-static void na_mii_write (int reg, int value)
-{
-	int mii_addr;
-
-	/* Select register */
-	mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg;
-	SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
-	/* Write value */
-	SET_EADDR (NETARM_ETH_MII_WRITE, value);
-	na_mii_poll_busy ();
-}
-
-static unsigned int na_mii_read (int reg)
-{
-	int mii_addr, val;
-
-	/* Select register */
-	mii_addr = CONFIG_SYS_ETH_PHY_ADDR + reg;
-	SET_EADDR (NETARM_ETH_MII_ADDR, mii_addr);
-	/* do one management cycle */
-	SET_EADDR (NETARM_ETH_MII_CMD,
-		   GET_EADDR (NETARM_ETH_MII_CMD) | NETARM_ETH_MIIC_RSTAT);
-	na_mii_poll_busy ();
-	/* Return read value */
-	val = GET_EADDR (NETARM_ETH_MII_READ);
-	return val;
-}
-
-static int na_mii_poll_busy (void)
-{
-	ulong start;
-	/* arm simple, non interrupt dependent timer */
-	start = get_timer(0));
-	while (get_timer(start) < NA_MII_POLL_BUSY_DELAY) {
-		if (!(GET_EADDR (NETARM_ETH_MII_IND) & NETARM_ETH_MIII_BUSY)) {
-			return 1;
-		}
-	}
-	printf ("na_mii_busy timeout\n");
-	return (0);
-}
-
-static int na_mii_identify_phy (void)
-{
-	int id_reg_a = 0;
-
-	/* get phy id register */
-	id_reg_a = na_mii_read (MII_PHY_ID);
-
-	if (id_reg_a == 0x0043) {
-		/* This must be an Enable or a Lucent LU3X31 PHY chip */
-		return 1;
-	} else if (id_reg_a == 0x0013) {
-		/* it is an Intel LXT971A */
-		return 1;
-	}
-	return (0);
-}
-
-static int na_mii_negotiate (void)
-{
-	int i = 0;
-
-	/* Enable auto-negotiation */
-	na_mii_write (MII_PHY_AUTONEGADV, 0x01e1);
-	/* FIXME: 0x01E1 is 100Mb half and full duplex, 0x0061 is 10Mb only */
-	/* Restart auto-negotiation */
-	na_mii_write (MII_PHY_CONTROL, 0x1200);
-
-	/* status register is 0xffff after setting the autoneg restart bit */
-	while (na_mii_read (MII_PHY_STATUS) == 0xffff) {
-		i++;
-	}
-
-	/* na_mii_read uses the timer already, so we can't use it again for
-	   timeout checking.
-	   Instead we just try some times.
-	 */
-	for (i = 0; i < 40000; i++) {
-		if ((na_mii_read (MII_PHY_STATUS) & 0x0024) == 0x0024) {
-			return 0;
-		}
-	}
-	/*
-	   printf("*Warning* autonegotiation timeout, status: 0x%x\n",na_mii_read(MII_PHY_STATUS));
-	 */
-	return (1);
-}
-
-static unsigned int na_mii_check_speed (void)
-{
-	unsigned int status;
-
-	/* Read Status register */
-	status = na_mii_read (MII_PHY_STATUS);
-	/* Check link status.  If 0, default to 100 Mbps. */
-	if ((status & 0x0004) == 0) {
-		printf ("*Warning* no link detected, set default speed to 100Mbs\n");
-		return 1;
-	} else {
-		if ((na_mii_read (17) & 0x4000) != 0) {
-			printf ("100Mbs link detected\n");
-			return 1;
-		} else {
-			printf ("10Mbs link detected\n");
-			return 0;
-		}
-	}
-	return 0;
-}
-
-static int reset_eth (void)
-{
-	int pt;
-	ulong start;
-
-	na_get_mac_addr ();
-	pt = na_mii_identify_phy ();
-
-	/* reset the phy */
-	na_mii_write (MII_PHY_CONTROL, 0x8000);
-	start = get_timer(0);
-	while (get_timer(start) < NA_MII_NEGOTIATE_DELAY) {
-		if ((na_mii_read (MII_PHY_STATUS) & 0x8000) == 0) {
-			break;
-		}
-	}
-	if (get_timer(start) >= NA_MII_NEGOTIATE_DELAY)
-		printf ("phy reset timeout\n");
-
-	/* set the PCS reg */
-	SET_EADDR (NETARM_ETH_PCS_CFG, NETARM_ETH_PCSC_CLKS_25M |
-		   NETARM_ETH_PCSC_ENJAB | NETARM_ETH_PCSC_NOCFR);
-
-	na_mii_negotiate ();
-	na_mii_check_speed ();
-
-	/* Delay 10 millisecond.  (Maybe this should be 1 second.) */
-	udelay (10000);
-
-	/* Turn receive on.
-	   Enable statistics register autozero on read.
-	   Do not insert MAC address on transmit.
-	   Do not enable special test modes.  */
-	SET_EADDR (NETARM_ETH_STL_CFG,
-		   (NETARM_ETH_STLC_AUTOZ | NETARM_ETH_STLC_RXEN));
-
-	/* Set the inter-packet gap delay to 0.96us for MII.
-	   The NET+ARM H/W Reference Guide indicates that the Back-to-back IPG
-	   Gap Timer Register should be set to 0x15 and the Non Back-to-back IPG
-	   Gap Timer Register should be set to 0x00000C12 for the MII PHY. */
-	SET_EADDR (NETARM_ETH_B2B_IPG_GAP_TMR, 0x15);
-	SET_EADDR (NETARM_ETH_NB2B_IPG_GAP_TMR, 0x00000C12);
-
-	/* Add CRC to end of packets.
-	   Pad packets to minimum length of 64 bytes.
-	   Allow unlimited length transmit packets.
-	   Receive all broadcast packets.
-	   NOTE:  Multicast addressing is NOT enabled here currently. */
-	SET_EADDR (NETARM_ETH_MAC_CFG,
-		   (NETARM_ETH_MACC_CRCEN |
-		    NETARM_ETH_MACC_PADEN | NETARM_ETH_MACC_HUGEN));
-	SET_EADDR (NETARM_ETH_SAL_FILTER, NETARM_ETH_SALF_BROAD);
-
-	/* enable fifos */
-	SET_EADDR (NETARM_ETH_GEN_CTRL,
-		   (NETARM_ETH_GCR_ERX | NETARM_ETH_GCR_ETX));
-
-	return (0);
-}
-
-
-extern int eth_init (bd_t * bd)
-{
-	reset_eth ();
-	return 0;
-}
-
-extern void eth_halt (void)
-{
-	SET_EADDR (NETARM_ETH_GEN_CTRL, 0);
-}
-
-/* Get a data block via Ethernet */
-extern int eth_rx (void)
-{
-	int i;
-	unsigned short rxlen;
-	unsigned int *addr;
-	unsigned int rxstatus, lastrxlen;
-	char *pa;
-
-	/* RXBR is 1, data block was received */
-	if ((GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXBR) == 0)
-		return 0;
-
-	/* get status register and the length of received block */
-	rxstatus = GET_EADDR (NETARM_ETH_RX_STAT);
-	rxlen = (rxstatus & NETARM_ETH_RXSTAT_SIZE) >> 16;
-
-	if (rxlen == 0)
-		return 0;
-
-	/* clear RXBR to make fifo available */
-	SET_EADDR (NETARM_ETH_GEN_STAT,
-		   GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_RXBR);
-
-	/* clear TXBC to make fifo available */
-	/* According to NETARM50 data manual you just have to clear
-	   RXBR but that has no effect. Only after clearing TXBC the
-	   Fifo becomes readable. */
-	SET_EADDR (NETARM_ETH_GEN_STAT,
-		   GET_EADDR (NETARM_ETH_GEN_STAT) & ~NETARM_ETH_GST_TXBC);
-
-	addr = (unsigned int *) NetRxPackets[0];
-	pa = (char *) NetRxPackets[0];
-
-	/* read the fifo */
-	for (i = 0; i < rxlen / 4; i++) {
-		*addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
-		addr++;
-	}
-
-	if (GET_EADDR (NETARM_ETH_GEN_STAT) & NETARM_ETH_GST_RXREGR) {
-		/* RXFDB indicates wether the last word is 1,2,3 or 4 bytes long */
-		lastrxlen =
-			(GET_EADDR (NETARM_ETH_GEN_STAT) &
-			 NETARM_ETH_GST_RXFDB) >> 28;
-		*addr = GET_EADDR (NETARM_ETH_FIFO_DAT1);
-		switch (lastrxlen) {
-		case 1:
-			*addr &= 0xff000000;
-			break;
-		case 2:
-			*addr &= 0xffff0000;
-			break;
-		case 3:
-			*addr &= 0xffffff00;
-			break;
-		}
-	}
-
-	/* Pass the packet up to the protocol layers. */
-	NetReceive (NetRxPackets[0], rxlen);
-
-	return rxlen;
-}
-
-/* Send a data block via Ethernet. */
-extern int eth_send(void *packet, int length)
-{
-	int i, length32;
-	char *pa;
-	unsigned int *pa32, lastp = 0, rest;
-
-	pa = (char *) packet;
-	pa32 = (unsigned int *) packet;
-	length32 = length / 4;
-	rest = length % 4;
-
-	/* make sure there's no garbage in the last word */
-	switch (rest) {
-	case 0:
-		lastp = pa32[length32];
-		length32--;
-		break;
-	case 1:
-		lastp = pa32[length32] & 0x000000ff;
-		break;
-	case 2:
-		lastp = pa32[length32] & 0x0000ffff;
-		break;
-	case 3:
-		lastp = pa32[length32] & 0x00ffffff;
-		break;
-	}
-
-	/* write to the fifo */
-	for (i = 0; i < length32; i++)
-		SET_EADDR (NETARM_ETH_FIFO_DAT1, pa32[i]);
-
-	/* the last word is written to an extra register, this
-	   starts the transmission */
-	SET_EADDR (NETARM_ETH_FIFO_DAT2, lastp);
-
-	/* NETARM_ETH_TXSTAT_TXOK should be checked, to know if the transmission
-	   went fine. But we can't use the timer for a timeout loop because
-	   of it is used already in upper layers. So we just try some times. */
-	i = 0;
-	while (i < 50000) {
-		if ((GET_EADDR (NETARM_ETH_TX_STAT) & NETARM_ETH_TXSTAT_TXOK)
-		    == NETARM_ETH_TXSTAT_TXOK)
-			return 0;
-		i++;
-	}
-
-	printf ("eth_send timeout\n");
-	return 1;
-}
diff --git a/drivers/net/netarm_eth.h b/drivers/net/netarm_eth.h
deleted file mode 100644
index 8edab82..0000000
--- a/drivers/net/netarm_eth.h
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Copyright (C) 2003 IMMS gGmbH <www.imms.de>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * author(s): Thomas Elste, <info@elste.org>
- */
-
-#include <asm/types.h>
-#include <config.h>
-
-#ifdef CONFIG_DRIVER_NETARMETH
-
-#define SET_EADDR(ad,val) *(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE) = val
-#define GET_EADDR(ad) (*(volatile unsigned int*)(ad + NETARM_ETH_MODULE_BASE))
-
-#define NA_MII_POLL_BUSY_DELAY 900
-
-/* MII negotiation timeout value
-   500 jiffies = 5 seconds */
-#define NA_MII_NEGOTIATE_DELAY 30
-
-/* Registers in the physical layer chip */
-#define MII_PHY_CONTROL		0
-#define MII_PHY_STATUS		1
-#define MII_PHY_ID              2
-#define MII_PHY_AUTONEGADV	4
-
-#endif /* CONFIG_DRIVER_NETARMETH */
diff --git a/drivers/net/phy/atheros.c b/drivers/net/phy/atheros.c
index 798473d..9b3808b 100644
--- a/drivers/net/phy/atheros.c
+++ b/drivers/net/phy/atheros.c
@@ -30,7 +30,7 @@
 	return 0;
 }
 
-struct phy_driver AR8021_driver =  {
+static struct phy_driver AR8021_driver =  {
 	.name = "AR8021",
 	.uid = 0x4dd040,
 	.mask = 0xfffff0,
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index baef60f..1ffa791 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -43,7 +43,7 @@
  *   what is supported.  Returns < 0 on error, 0 if the PHY's advertisement
  *   hasn't changed, and > 0 if it has changed.
  */
-int genphy_config_advert(struct phy_device *phydev)
+static int genphy_config_advert(struct phy_device *phydev)
 {
 	u32 advertise;
 	int oldadv, adv;
@@ -118,7 +118,7 @@
  * Description: Configures MII_BMCR to force speed/duplex
  *   to the values in phydev. Assumes that the values are valid.
  */
-int genphy_setup_forced(struct phy_device *phydev)
+static int genphy_setup_forced(struct phy_device *phydev)
 {
 	int err;
 	int ctl = 0;
@@ -465,7 +465,7 @@
 	return 0;
 }
 
-int phy_probe(struct phy_device *phydev)
+static int phy_probe(struct phy_device *phydev)
 {
 	int err = 0;
 
@@ -488,7 +488,7 @@
 	return &genphy_driver;
 }
 
-struct phy_driver *get_phy_driver(struct phy_device *phydev,
+static struct phy_driver *get_phy_driver(struct phy_device *phydev,
 				phy_interface_t interface)
 {
 	struct list_head *entry;
@@ -505,8 +505,9 @@
 	return generic_for_interface(interface);
 }
 
-struct phy_device *phy_device_create(struct mii_dev *bus, int addr, int phy_id,
-					phy_interface_t interface)
+static struct phy_device *phy_device_create(struct mii_dev *bus, int addr,
+					    int phy_id,
+					    phy_interface_t interface)
 {
 	struct phy_device *dev;
 
@@ -549,7 +550,7 @@
  * Description: Reads the ID registers of the PHY at @addr on the
  *   @bus, stores it in @phy_id and returns zero on success.
  */
-int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
+static int get_phy_id(struct mii_dev *bus, int addr, int devad, u32 *phy_id)
 {
 	int phy_reg;
 
@@ -581,8 +582,8 @@
  * Description: Reads the ID registers of the PHY at @addr on the
  *   @bus, then allocates and returns the phy_device to represent it.
  */
-struct phy_device *get_phy_device(struct mii_dev *bus, int addr,
-				phy_interface_t interface)
+static struct phy_device *get_phy_device(struct mii_dev *bus, int addr,
+					 phy_interface_t interface)
 {
 	u32 phy_id = 0x1fffffff;
 	int i;
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c
index 0a0f40d..6c5cb99 100644
--- a/drivers/net/phy/vitesse.c
+++ b/drivers/net/phy/vitesse.c
@@ -123,7 +123,7 @@
 }
 
 /* Vitesse VSC8601 */
-int vsc8601_config(struct phy_device *phydev)
+static int vsc8601_config(struct phy_device *phydev)
 {
 	/* Configure some basic stuff */
 #ifdef CONFIG_SYS_VSC8601_SKEWFIX
diff --git a/drivers/net/smc91111.c b/drivers/net/smc91111.c
index 6dc7ad5..1357ede 100644
--- a/drivers/net/smc91111.c
+++ b/drivers/net/smc91111.c
@@ -178,8 +178,6 @@
  * inx,outx functions fixed this problem.
  */
 
-#define barrier() __asm__ __volatile__("": : :"memory")
-
 static inline word SMC_inw(struct eth_device *dev, dword offset)
 {
 	word v;
diff --git a/drivers/net/vsc7385.c b/drivers/net/vsc7385.c
index ada42c4..a5110e5 100644
--- a/drivers/net/vsc7385.c
+++ b/drivers/net/vsc7385.c
@@ -16,6 +16,7 @@
 #include <common.h>
 #include <asm/io.h>
 #include <asm/errno.h>
+#include "vsc7385.h"
 
 /*
  * Upload a Vitesse VSC7385 firmware image to the hardware
diff --git a/drivers/pci/fsl_pci_init.c b/drivers/pci/fsl_pci_init.c
index 0d46c96..48ae163 100644
--- a/drivers/pci/fsl_pci_init.c
+++ b/drivers/pci/fsl_pci_init.c
@@ -1,5 +1,5 @@
 /*
- * Copyright 2007-2011 Freescale Semiconductor, Inc.
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms of the GNU General Public License as published by the Free
@@ -211,7 +211,7 @@
 	return 1;
 }
 
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
 static void fsl_pcie_boot_master(pit_t *pi)
 {
 	/* configure inbound window for slave's u-boot image */
@@ -276,14 +276,18 @@
 		release_addr = CONFIG_SYS_PCIE1_MEM_VIRT
 			+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
 		break;
+#ifdef CONFIG_SYS_PCIE2_MEM_VIRT
 	case 2:
 		release_addr = CONFIG_SYS_PCIE2_MEM_VIRT
 			+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
 		break;
+#endif
+#ifdef CONFIG_SYS_PCIE3_MEM_VIRT
 	case 3:
 		release_addr = CONFIG_SYS_PCIE3_MEM_VIRT
 			+ CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET;
 		break;
+#endif
 	default:
 		release_addr = 0;
 		break;
@@ -384,7 +388,7 @@
 	/* see if we are a PCIe or PCI controller */
 	pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
 
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
 	/* boot from PCIE --master */
 	char *s = getenv("bootmaster");
 	char pcie[6];
@@ -499,13 +503,7 @@
 	}
 
 #ifndef CONFIG_PCI_NOSCAN
-	pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &temp8);
-
-	/* Programming Interface (PCI_CLASS_PROG)
-	 * 0 == pci host or pcie root-complex,
-	 * 1 == pci agent or pcie end-point
-	 */
-	if (!temp8) {
+	if (!fsl_is_pci_agent(hose)) {
 		debug("           Scanning PCI bus %02x\n",
 			hose->current_busno);
 		hose->last_busno = pci_hose_scan_bus(hose, hose->current_busno);
@@ -543,12 +541,22 @@
 
 int fsl_is_pci_agent(struct pci_controller *hose)
 {
-	u8 prog_if;
+	u8 pcie_cap;
 	pci_dev_t dev = PCI_BDF(hose->first_busno, 0, 0);
 
-	pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
+	pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
+	if (pcie_cap == PCI_CAP_ID_EXP) {
+		u8 header_type;
 
-	return (prog_if == FSL_PROG_IF_AGENT);
+		pci_hose_read_config_byte(hose, dev, PCI_HEADER_TYPE,
+					  &header_type);
+		return (header_type & 0x7f) == PCI_HEADER_TYPE_NORMAL;
+	} else {
+		u8 prog_if;
+
+		pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &prog_if);
+		return (prog_if == FSL_PROG_IF_AGENT);
+	}
 }
 
 int fsl_pci_init_port(struct fsl_pci_info *pci_info,
@@ -594,7 +602,7 @@
 	if (fsl_is_pci_agent(hose)) {
 		fsl_pci_config_unlock(hose);
 		hose->last_busno = hose->first_busno;
-#ifdef CONFIG_FSL_CORENET
+#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
 	} else {
 		/* boot from PCIE --master releases slave's core 0 */
 		char *s = getenv("bootmaster");
@@ -618,12 +626,10 @@
 void fsl_pci_config_unlock(struct pci_controller *hose)
 {
 	pci_dev_t dev = PCI_BDF(hose->first_busno,0,0);
-	u8 agent;
 	u8 pcie_cap;
 	u16 pbfr;
 
-	pci_hose_read_config_byte(hose, dev, PCI_CLASS_PROG, &agent);
-	if (!agent)
+	if (!fsl_is_pci_agent(hose))
 		return;
 
 	pci_hose_read_config_byte(hose, dev, FSL_PCIE_CAP_ID, &pcie_cap);
@@ -660,10 +666,17 @@
 }
 
 #if defined(CONFIG_FSL_CORENET)
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+	#define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR3_PCIE1
+	#define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR3_PCIE2
+	#define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR3_PCIE3
+	#define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR3_PCIE4
+#else
 	#define _DEVDISR_PCIE1 FSL_CORENET_DEVDISR_PCIE1
 	#define _DEVDISR_PCIE2 FSL_CORENET_DEVDISR_PCIE2
 	#define _DEVDISR_PCIE3 FSL_CORENET_DEVDISR_PCIE3
 	#define _DEVDISR_PCIE4 FSL_CORENET_DEVDISR_PCIE4
+#endif
 	#define CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC85xx_GUTS_ADDR
 #elif defined(CONFIG_MPC85xx)
 	#define _DEVDISR_PCIE1 MPC85xx_DEVDISR_PCIE
@@ -743,34 +756,42 @@
 {
 	struct fsl_pci_info pci_info;
 	ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC8xxx_GUTS_ADDR;
-	u32 devdisr = in_be32(&gur->devdisr);
+	u32 devdisr;
+	u32 *addr;
+
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+	addr = &gur->devdisr3;
+#else
+	addr = &gur->devdisr;
+#endif
+	devdisr = in_be32(addr);
 
 #ifdef CONFIG_PCIE1
 	SET_STD_PCIE_INFO(pci_info, 1);
 	busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE1, &pci_info);
 #else
-	setbits_be32(&gur->devdisr, _DEVDISR_PCIE1); /* disable */
+	setbits_be32(addr, _DEVDISR_PCIE1); /* disable */
 #endif
 
 #ifdef CONFIG_PCIE2
 	SET_STD_PCIE_INFO(pci_info, 2);
 	busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE2, &pci_info);
 #else
-	setbits_be32(&gur->devdisr, _DEVDISR_PCIE2); /* disable */
+	setbits_be32(addr, _DEVDISR_PCIE2); /* disable */
 #endif
 
 #ifdef CONFIG_PCIE3
 	SET_STD_PCIE_INFO(pci_info, 3);
 	busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE3, &pci_info);
 #else
-	setbits_be32(&gur->devdisr, _DEVDISR_PCIE3); /* disable */
+	setbits_be32(addr, _DEVDISR_PCIE3); /* disable */
 #endif
 
 #ifdef CONFIG_PCIE4
 	SET_STD_PCIE_INFO(pci_info, 4);
 	busno = fsl_pcie_init_ctrl(busno, devdisr, PCIE4, &pci_info);
 #else
-	setbits_be32(&gur->devdisr, _DEVDISR_PCIE4); /* disable */
+	setbits_be32(addr, _DEVDISR_PCIE4); /* disable */
 #endif
 
  	return busno;
diff --git a/drivers/qe/qe.c b/drivers/qe/qe.c
index 9f71151..345587b 100644
--- a/drivers/qe/qe.c
+++ b/drivers/qe/qe.c
@@ -113,18 +113,21 @@
  * we just need to know what the SNUMs are for the threads.
  */
 static u8 thread_snum[] = {
+/* Evthreads 16-29 are not supported in MPC8309 */
+#if !defined(CONFIG_MPC8309)
 	0x04, 0x05, 0x0c, 0x0d,
 	0x14, 0x15, 0x1c, 0x1d,
 	0x24, 0x25, 0x2c, 0x2d,
-	0x34, 0x35, 0x88, 0x89,
-	0x98, 0x99, 0xa8, 0xa9,
-	0xb8, 0xb9, 0xc8, 0xc9,
-	0xd8, 0xd9, 0xe8, 0xe9,
-	0x08, 0x09, 0x18, 0x19,
-	0x28, 0x29, 0x38, 0x39,
-	0x48, 0x49, 0x58, 0x59,
-	0x68, 0x69, 0x78, 0x79,
-	0x80, 0x81
+	0x34, 0x35,
+#endif
+	0x88, 0x89, 0x98, 0x99,
+	0xa8, 0xa9, 0xb8, 0xb9,
+	0xc8, 0xc9, 0xd8, 0xd9,
+	0xe8, 0xe9, 0x08, 0x09,
+	0x18, 0x19, 0x28, 0x29,
+	0x38, 0x39, 0x48, 0x49,
+	0x58, 0x59, 0x68, 0x69,
+	0x78, 0x79, 0x80, 0x81
 };
 
 static void qe_snums_init(void)
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 3c32f97..5e8b648 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -36,19 +36,14 @@
 COBJS-$(CONFIG_NS9750_UART) += ns9750_serial.o
 COBJS-$(CONFIG_OPENCORES_YANU) += opencores_yanu.o
 COBJS-$(CONFIG_SYS_NS16550) += ns16550.o
-COBJS-$(CONFIG_DRIVER_S3C4510_UART) += s3c4510b_uart.o
 COBJS-$(CONFIG_S3C64XX) += s3c64xx.o
 COBJS-$(CONFIG_S5P) += serial_s5p.o
 COBJS-$(CONFIG_SYS_NS16550_SERIAL) += serial_ns16550.o
-COBJS-$(CONFIG_CLPS7111_SERIAL) += serial_clps7111.o
 COBJS-$(CONFIG_IMX_SERIAL) += serial_imx.o
 COBJS-$(CONFIG_IXP_SERIAL) += serial_ixp.o
 COBJS-$(CONFIG_KS8695_SERIAL) += serial_ks8695.o
-COBJS-$(CONFIG_LPC2292_SERIAL) += serial_lpc2292.o
-COBJS-$(CONFIG_LH7A40X_SERIAL) += serial_lh7a40x.o
 COBJS-$(CONFIG_MAX3100_SERIAL) += serial_max3100.o
 COBJS-$(CONFIG_MXC_UART) += serial_mxc.o
-COBJS-$(CONFIG_NETARM_SERIAL) += serial_netarm.o
 COBJS-$(CONFIG_PL010_SERIAL) += serial_pl01x.o
 COBJS-$(CONFIG_PL011_SERIAL) += serial_pl01x.o
 COBJS-$(CONFIG_PXA_SERIAL) += serial_pxa.o
diff --git a/drivers/serial/altera_jtag_uart.c b/drivers/serial/altera_jtag_uart.c
index 654b501..28319ba 100644
--- a/drivers/serial/altera_jtag_uart.c
+++ b/drivers/serial/altera_jtag_uart.c
@@ -59,12 +59,6 @@
 	writel ((unsigned char)c, &jtag->data);
 }
 
-static void altera_jtag_serial_puts(const char *s)
-{
-	while (*s != 0)
-		serial_putc (*s++);
-}
-
 static int altera_jtag_serial_tstc(void)
 {
 	return ( readl (&jtag->control) & NIOS_JTAG_RRDY);
@@ -91,7 +85,7 @@
 	.stop	= NULL,
 	.setbrg	= altera_jtag_serial_setbrg,
 	.putc	= altera_jtag_serial_putc,
-	.puts	= altera_jtag_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= altera_jtag_serial_getc,
 	.tstc	= altera_jtag_serial_tstc,
 };
diff --git a/drivers/serial/altera_uart.c b/drivers/serial/altera_uart.c
index 27550ed..118cd58 100644
--- a/drivers/serial/altera_uart.c
+++ b/drivers/serial/altera_uart.c
@@ -82,13 +82,6 @@
 	writel ((unsigned char)c, &uart->txdata);
 }
 
-static void altera_serial_puts(const char *s)
-{
-	while (*s != 0) {
-		serial_putc (*s++);
-	}
-}
-
 static int altera_serial_tstc(void)
 {
 	return (readl (&uart->status) & NIOS_UART_RRDY);
@@ -107,7 +100,7 @@
 	.stop	= NULL,
 	.setbrg	= altera_serial_setbrg,
 	.putc	= altera_serial_putc,
-	.puts	= altera_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= altera_serial_getc,
 	.tstc	= altera_serial_tstc,
 };
diff --git a/drivers/serial/atmel_usart.c b/drivers/serial/atmel_usart.c
index 1303031..c4d7432 100644
--- a/drivers/serial/atmel_usart.c
+++ b/drivers/serial/atmel_usart.c
@@ -86,12 +86,6 @@
 	writel(c, &usart->thr);
 }
 
-static void atmel_serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
 static int atmel_serial_getc(void)
 {
 	atmel_usart3_t *usart = (atmel_usart3_t *)CONFIG_USART_BASE;
@@ -113,7 +107,7 @@
 	.stop	= NULL,
 	.setbrg	= atmel_serial_setbrg,
 	.putc	= atmel_serial_putc,
-	.puts	= atmel_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= atmel_serial_getc,
 	.tstc	= atmel_serial_tstc,
 };
diff --git a/drivers/serial/lpc32xx_hsuart.c b/drivers/serial/lpc32xx_hsuart.c
index 02429b5..7559916 100644
--- a/drivers/serial/lpc32xx_hsuart.c
+++ b/drivers/serial/lpc32xx_hsuart.c
@@ -77,19 +77,13 @@
 	return 0;
 }
 
-static void lpc32xx_serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
 static struct serial_device lpc32xx_serial_drv = {
 	.name	= "lpc32xx_serial",
 	.start	= lpc32xx_serial_init,
 	.stop	= NULL,
 	.setbrg	= lpc32xx_serial_setbrg,
 	.putc	= lpc32xx_serial_putc,
-	.puts	= lpc32xx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= lpc32xx_serial_getc,
 	.tstc	= lpc32xx_serial_tstc,
 };
diff --git a/drivers/serial/mcfuart.c b/drivers/serial/mcfuart.c
index 00a7114..7e25797 100644
--- a/drivers/serial/mcfuart.c
+++ b/drivers/serial/mcfuart.c
@@ -28,6 +28,8 @@
  */
 
 #include <common.h>
+#include <serial.h>
+#include <linux/compiler.h>
 
 #include <asm/immap.h>
 #include <asm/uart.h>
@@ -87,13 +89,6 @@
 	uart->utb = c;
 }
 
-static void mcf_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc(*s++);
-	}
-}
-
 static int mcf_serial_getc(void)
 {
 	volatile uart_t *uart = (volatile uart_t *)(CONFIG_SYS_UART_BASE);
@@ -136,7 +131,7 @@
 	.stop	= NULL,
 	.setbrg	= mcf_serial_setbrg,
 	.putc	= mcf_serial_putc,
-	.puts	= mcf_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mcf_serial_getc,
 	.tstc	= mcf_serial_tstc,
 };
diff --git a/drivers/serial/ns9750_serial.c b/drivers/serial/ns9750_serial.c
index cb545c4..85fc68a 100644
--- a/drivers/serial/ns9750_serial.c
+++ b/drivers/serial/ns9750_serial.c
@@ -100,19 +100,6 @@
 }
 
 /***********************************************************************
- * @Function: serial_puts
- * @Return: n/a
- * @Descr: writes non-zero string to the FIFO.
- ***********************************************************************/
-
-static void ns9750_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc( *s++ );
-	}
-}
-
-/***********************************************************************
  * @Function: serial_getc
  * @Return: the character read
  * @Descr: performs only 8bit accesses to the FIFO. No error handling
@@ -215,7 +202,7 @@
 	.stop	= NULL,
 	.setbrg	= ns9750_serial_setbrg,
 	.putc	= ns9750_serial_putc,
-	.puts	= ns9750_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= ns9750_serial_getc,
 	.tstc	= ns9750_serial_tstc,
 };
diff --git a/drivers/serial/opencores_yanu.c b/drivers/serial/opencores_yanu.c
index 49bccf3..4ca6ef0 100644
--- a/drivers/serial/opencores_yanu.c
+++ b/drivers/serial/opencores_yanu.c
@@ -161,14 +161,6 @@
 	writel((unsigned char)c, &uart->data);
 }
 
-static void oc_serial_puts(const char *s)
-{
-	while (*s != 0) {
-		serial_putc (*s++);
-	}
-}
-
-
 static int oc_serial_tstc(void)
 {
 	unsigned status ;
@@ -195,7 +187,7 @@
 	.stop	= NULL,
 	.setbrg	= oc_serial_setbrg,
 	.putc	= oc_serial_putc,
-	.puts	= oc_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= oc_serial_getc,
 	.tstc	= oc_serial_tstc,
 };
diff --git a/drivers/serial/s3c4510b_uart.c b/drivers/serial/s3c4510b_uart.c
deleted file mode 100644
index 423d26e..0000000
--- a/drivers/serial/s3c4510b_uart.c
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * (C) Copyright 2004
- * DAVE Srl
- * http://www.dave-tech.it
- * http://www.wawnet.biz
- * mailto:info@wawnet.biz
- *
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- * MODULE:        $Id:$
- * Description:   UART/Serial interface for Samsung S3C4510B SoC
- * Runtime Env:   ARM7TDMI
- * Change History:
- *     03-02-04    Create (Curt Brune) curt@cucy.com
- *
- */
-
-#include <common.h>
-
-#include <asm/hardware.h>
-#include "s3c4510b_uart.h"
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static UART    *uart;
-
-/* flush serial input queue. returns 0 on success or negative error
- * number otherwise
- */
-static int serial_flush_input(void)
-{
-	volatile u32 tmp;
-
-	/* keep on reading as long as the receiver is not empty */
-	while( uart->m_stat.bf.rxReady) {
-		tmp = uart->m_rx;
-	}
-
-	return 0;
-}
-
-
-/* flush output queue. returns 0 on success or negative error number
- * otherwise
- */
-static int serial_flush_output(void)
-{
-	/* wait until the transmitter is no longer busy */
-	while( !uart->m_stat.bf.txBufEmpty);
-
-	return 0;
-}
-
-
-static void s3c4510b_serial_setbrg(void)
-{
-	UART_LINE_CTRL ulctrl;
-	UART_CTRL      uctrl;
-	UART_BAUD_DIV  ubd;
-
-	serial_flush_output();
-	serial_flush_input();
-
-	/* control register */
-	uctrl.ui = 0x0;
-	uctrl.bf.rxMode = 0x1;
-	uctrl.bf.rxIrq = 0x0;
-	uctrl.bf.txMode = 0x1;
-	uctrl.bf.DSR = 0x0;
-	uctrl.bf.sendBreak = 0x0;
-	uctrl.bf.loopBack = 0x0;
-	uart->m_ctrl.ui = uctrl.ui;
-
-	/* line control register */
-	ulctrl.ui  = 0x0;
-	ulctrl.bf.wordLen   = 0x3; /* 8 bit data */
-	ulctrl.bf.nStop     = 0x0; /* 1 stop bit */
-	ulctrl.bf.parity    = 0x0; /* no parity */
-	ulctrl.bf.clk       = 0x0; /* internal clock */
-	ulctrl.bf.infra_red = 0x0; /* no infra_red */
-	uart->m_lineCtrl.ui = ulctrl.ui;
-
-	ubd.ui = 0x0;
-
-	/* see table on page 10-15 in SAMSUNG S3C4510B manual */
-	/* get correct divisor */
-	switch(gd->baudrate) {
-	case   1200:	ubd.bf.cnt0 = 1301;	break;
-	case   2400:	ubd.bf.cnt0 =  650;	break;
-	case   4800:	ubd.bf.cnt0 =  324;	break;
-	case   9600:	ubd.bf.cnt0 =  162;	break;
-	case  19200:	ubd.bf.cnt0 =   80;	break;
-	case  38400:	ubd.bf.cnt0 =   40;	break;
-	case  57600:	ubd.bf.cnt0 =   26;	break;
-	case 115200:	ubd.bf.cnt0 =   13;	break;
-	}
-
-	uart->m_baudDiv.ui = ubd.ui;
-	uart->m_baudCnt = 0x0;
-	uart->m_baudClk = 0x0;
-
-}
-
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-static int s3c4510b_serial_init(void)
-{
-
-#if   CONFIG_SERIAL1 == 1
-	uart = (UART *)UART0_BASE;
-#elif CONFIG_SERIAL1 == 2
-	uart = (UART *)UART1_BASE;
-#else
-#error CONFIG_SERIAL1 not equal to 1 or 2
-#endif
-
-	serial_setbrg ();
-
-	return (0);
-}
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void s3c4510_serial_putc(const char c)
-{
-	/* wait for room in the transmit FIFO */
-	while( !uart->m_stat.bf.txBufEmpty);
-
-	uart->m_tx = c;
-
-	/*
-		to be polite with serial console add a line feed
-		to the carriage return character
-	*/
-	if (c=='\n')
-		serial_putc('\r');
-}
-
-/*
- * Test if an input byte is ready from the serial port. Returns non-zero on
- * success, 0 otherwise.
- */
-static int s3c4510b_serial_tstc(void)
-{
-	return uart->m_stat.bf.rxReady;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int s3c4510b_serial_getc(void)
-{
-	int rv;
-
-	for(;;) {
-		rv = serial_tstc();
-
-		if (rv) {
-			return uart->m_rx & 0xFF;
-		}
-	}
-}
-
-static void s3c4510b_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-
-	/* busy wait for tx complete */
-	while ( !uart->m_stat.bf.txComplete);
-
-	/* clear break */
-	uart->m_ctrl.bf.sendBreak = 0;
-
-}
-
-static struct serial_device s3c4510b_serial_drv = {
-	.name	= "s3c4510b_serial",
-	.start	= s3c4510b_serial_init,
-	.stop	= NULL,
-	.setbrg	= s3c4510b_serial_setbrg,
-	.putc	= s3c4510b_serial_putc,
-	.puts	= s3c4510b_serial_puts,
-	.getc	= s3c4510b_serial_getc,
-	.tstc	= s3c4510b_serial_tstc,
-};
-
-void s3c4510b_serial_initialize(void)
-{
-	serial_register(&s3c4510b_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &s3c4510b_serial_drv;
-}
diff --git a/drivers/serial/s3c4510b_uart.h b/drivers/serial/s3c4510b_uart.h
deleted file mode 100644
index b06c76d..0000000
--- a/drivers/serial/s3c4510b_uart.h
+++ /dev/null
@@ -1,109 +0,0 @@
-#ifndef __UART_H
-#define __UART_H
-
-/*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * Description:   S3C4510B UART register layout
- */
-
-/* UART LINE CONTROL register */
-typedef struct __BF_UART_LINE_CTRL {
-	u32    wordLen: 2;
-	u32      nStop: 1;
-	u32     parity: 3;
-	u32        clk: 1;
-	u32  infra_red: 1;
-	u32     unused:24;
-} BF_UART_LINE_CTRL;
-
-typedef union _UART_LINE_CTRL {
-	u32               ui;
-	BF_UART_LINE_CTRL bf;
-} UART_LINE_CTRL;
-
-/* UART CONTROL register */
-typedef struct __BF_UART_CTRL {
-	u32     rxMode: 2;
-	u32      rxIrq: 1;
-	u32     txMode: 2;
-	u32        DSR: 1;
-	u32  sendBreak: 1;
-	u32   loopBack: 1;
-	u32     unused:24;
-} BF_UART_CTRL;
-
-typedef union _UART_CTRL {
-	u32            ui;
-	BF_UART_CTRL   bf;
-} UART_CTRL;
-
-/* UART STATUS register */
-typedef struct __BF_UART_STAT {
-	u32      overrun: 1;
-	u32       parity: 1;
-	u32        frame: 1;
-	u32     breakIrq: 1;
-	u32          DTR: 1;
-	u32      rxReady: 1;
-	u32   txBufEmpty: 1;
-	u32   txComplete: 1;
-	u32       unused:24;
-} BF_UART_STAT;
-
-typedef union _UART_STAT {
-	u32            ui;
-	BF_UART_STAT   bf;
-} UART_STAT;
-
-/* UART BAUD_DIV register */
-typedef struct __BF_UART_BAUD_DIV {
-	u32      cnt1: 4;
-	u32      cnt0:12;
-	u32    unused:16;
-} BF_UART_BAUD_DIV;
-
-typedef union _UART_BAUD_DIV {
-	u32                ui;
-	BF_UART_BAUD_DIV   bf;
-} UART_BAUD_DIV;
-
-/* UART register block */
-typedef struct __UART {
-	volatile UART_LINE_CTRL  m_lineCtrl;
-	volatile UART_CTRL           m_ctrl;
-	volatile UART_STAT           m_stat;
-	volatile u32                   m_tx;
-	volatile u32                   m_rx;
-	volatile UART_BAUD_DIV    m_baudDiv;
-	volatile u32              m_baudCnt;
-	volatile u32              m_baudClk;
-} UART;
-
-#define NL          0x0A
-#define CR          0x0D
-#define BSP         0x08
-#define ESC         0x1B
-#define CTRLZ       0x1A
-#define RUBOUT      0x7F
-
-#endif
diff --git a/drivers/serial/s3c64xx.c b/drivers/serial/s3c64xx.c
index 9ab8a28..f53c2bf 100644
--- a/drivers/serial/s3c64xx.c
+++ b/drivers/serial/s3c64xx.c
@@ -40,8 +40,6 @@
 #error "Bad: you didn't configure serial ..."
 #endif
 
-#define barrier() asm volatile("" ::: "memory")
-
 /*
  * The coefficient, used to calculate the baudrate on S3C6400 UARTs is
  * calculated as
@@ -166,19 +164,13 @@
 	return uart->UTRSTAT & 0x1;
 }
 
-static void s3c64xx_serial_puts(const char *s)
-{
-	while (*s)
-		serial_putc(*s++);
-}
-
 static struct serial_device s3c64xx_serial_drv = {
 	.name	= "s3c64xx_serial",
 	.start	= s3c64xx_serial_init,
 	.stop	= NULL,
 	.setbrg	= s3c64xx_serial_setbrg,
 	.putc	= s3c64xx_serial_putc,
-	.puts	= s3c64xx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= s3c64xx_serial_getc,
 	.tstc	= s3c64xx_serial_tstc,
 };
diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c
index 5bbf3ae..f5f43a6 100644
--- a/drivers/serial/serial.c
+++ b/drivers/serial/serial.c
@@ -26,16 +26,35 @@
 #include <stdio_dev.h>
 #include <post.h>
 #include <linux/compiler.h>
+#include <errno.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
 static struct serial_device *serial_devices;
 static struct serial_device *serial_current;
 
+/**
+ * serial_null() - Void registration routine of a serial driver
+ *
+ * This routine implements a void registration routine of a serial
+ * driver. The registration routine of a particular driver is aliased
+ * to this empty function in case the driver is not compiled into
+ * U-Boot.
+ */
 static void serial_null(void)
 {
 }
 
+/**
+ * serial_initfunc() - Forward declare of driver registration routine
+ * @name:	Name of the real driver registration routine.
+ *
+ * This macro expands onto forward declaration of a driver registration
+ * routine, which is then used below in serial_initialize() function.
+ * The declaration is made weak and aliases to serial_null() so in case
+ * the driver is not compiled in, the function is still declared and can
+ * be used, but aliases to serial_null() and thus is optimized away.
+ */
 #define serial_initfunc(name)					\
 	void name(void)						\
 		__attribute__((weak, alias("serial_null")));
@@ -77,7 +96,6 @@
 serial_initfunc(mcf_serial_initialize);
 serial_initfunc(ns9750_serial_initialize);
 serial_initfunc(oc_serial_initialize);
-serial_initfunc(s3c4510b_serial_initialize);
 serial_initfunc(s3c64xx_serial_initialize);
 serial_initfunc(sandbox_serial_initialize);
 serial_initfunc(clps7111_serial_initialize);
@@ -85,15 +103,23 @@
 serial_initfunc(ixp_serial_initialize);
 serial_initfunc(ks8695_serial_initialize);
 serial_initfunc(lh7a40x_serial_initialize);
-serial_initfunc(lpc2292_serial_initialize);
 serial_initfunc(max3100_serial_initialize);
 serial_initfunc(mxc_serial_initialize);
-serial_initfunc(netarm_serial_initialize);
 serial_initfunc(pl01x_serial_initialize);
 serial_initfunc(s3c44b0_serial_initialize);
 serial_initfunc(sa1100_serial_initialize);
 serial_initfunc(sh_serial_initialize);
 
+/**
+ * serial_register() - Register serial driver with serial driver core
+ * @dev:	Pointer to the serial driver structure
+ *
+ * This function registers the serial driver supplied via @dev with
+ * serial driver core, thus making U-Boot aware of it and making it
+ * available for U-Boot to use. On platforms that still require manual
+ * relocation of constant variables, relocation of the supplied structure
+ * is performed.
+ */
 void serial_register(struct serial_device *dev)
 {
 #ifdef CONFIG_NEEDS_MANUAL_RELOC
@@ -117,6 +143,15 @@
 	serial_devices = dev;
 }
 
+/**
+ * serial_initialize() - Register all compiled-in serial port drivers
+ *
+ * This function registers all serial port drivers that are compiled
+ * into the U-Boot binary with the serial core, thus making them
+ * available to U-Boot to use. Lastly, this function assigns a default
+ * serial port to the serial core. That serial port is then used as a
+ * default output.
+ */
 void serial_initialize(void)
 {
 	mpc8xx_serial_initialize();
@@ -156,7 +191,6 @@
 	mcf_serial_initialize();
 	ns9750_serial_initialize();
 	oc_serial_initialize();
-	s3c4510b_serial_initialize();
 	s3c64xx_serial_initialize();
 	sandbox_serial_initialize();
 	clps7111_serial_initialize();
@@ -164,10 +198,8 @@
 	ixp_serial_initialize();
 	ks8695_serial_initialize();
 	lh7a40x_serial_initialize();
-	lpc2292_serial_initialize();
 	max3100_serial_initialize();
 	mxc_serial_initialize();
-	netarm_serial_initialize();
 	pl01x_serial_initialize();
 	s3c44b0_serial_initialize();
 	sa1100_serial_initialize();
@@ -176,6 +208,13 @@
 	serial_assign(default_serial_console()->name);
 }
 
+/**
+ * serial_stdio_init() - Register serial ports with STDIO core
+ *
+ * This function generates a proxy driver for each serial port driver.
+ * These proxy drivers then register with the STDIO core, making the
+ * serial drivers available as STDIO devices.
+ */
 void serial_stdio_init(void)
 {
 	struct stdio_dev dev;
@@ -200,20 +239,38 @@
 	}
 }
 
+/**
+ * serial_assign() - Select the serial output device by name
+ * @name:	Name of the serial driver to be used as default output
+ *
+ * This function configures the serial output multiplexing by
+ * selecting which serial device will be used as default. In case
+ * the STDIO "serial" device is selected as stdin/stdout/stderr,
+ * the serial device previously configured by this function will be
+ * used for the particular operation.
+ *
+ * Returns 0 on success, negative on error.
+ */
 int serial_assign(const char *name)
 {
 	struct serial_device *s;
 
 	for (s = serial_devices; s; s = s->next) {
-		if (strcmp(s->name, name) == 0) {
-			serial_current = s;
-			return 0;
-		}
+		if (strcmp(s->name, name))
+			continue;
+		serial_current = s;
+		return 0;
 	}
 
-	return 1;
+	return -EINVAL;
 }
 
+/**
+ * serial_reinit_all() - Reinitialize all compiled-in serial ports
+ *
+ * This function reinitializes all serial ports that are compiled
+ * into U-Boot by calling their serial_start() functions.
+ */
 void serial_reinit_all(void)
 {
 	struct serial_device *s;
@@ -222,60 +279,173 @@
 		s->start();
 }
 
+/**
+ * get_current() - Return pointer to currently selected serial port
+ *
+ * This function returns a pointer to currently selected serial port.
+ * The currently selected serial port is altered by serial_assign()
+ * function.
+ *
+ * In case this function is called before relocation or before any serial
+ * port is configured, this function calls default_serial_console() to
+ * determine the serial port. Otherwise, the configured serial port is
+ * returned.
+ *
+ * Returns pointer to the currently selected serial port on success,
+ * NULL on error.
+ */
 static struct serial_device *get_current(void)
 {
 	struct serial_device *dev;
 
-	if (!(gd->flags & GD_FLG_RELOC) || !serial_current) {
+	if (!(gd->flags & GD_FLG_RELOC))
 		dev = default_serial_console();
-
-		/* We must have a console device */
-		if (!dev) {
-#ifdef CONFIG_SPL_BUILD
-			puts("Cannot find console\n");
-			hang();
-#else
-			panic("Cannot find console\n");
-#endif
-		}
-	} else
+	else if (!serial_current)
+		dev = default_serial_console();
+	else
 		dev = serial_current;
+
+	/* We must have a console device */
+	if (!dev) {
+#ifdef CONFIG_SPL_BUILD
+		puts("Cannot find console\n");
+		hang();
+#else
+		panic("Cannot find console\n");
+#endif
+	}
+
 	return dev;
 }
 
+/**
+ * serial_init() - Initialize currently selected serial port
+ *
+ * This function initializes the currently selected serial port. This
+ * usually involves setting up the registers of that particular port,
+ * enabling clock and such. This function uses the get_current() call
+ * to determine which port is selected.
+ *
+ * Returns 0 on success, negative on error.
+ */
 int serial_init(void)
 {
 	return get_current()->start();
 }
 
+/**
+ * serial_setbrg() - Configure baud-rate of currently selected serial port
+ *
+ * This function configures the baud-rate of the currently selected
+ * serial port. The baud-rate is retrieved from global data within
+ * the serial port driver. This function uses the get_current() call
+ * to determine which port is selected.
+ *
+ * Returns 0 on success, negative on error.
+ */
 void serial_setbrg(void)
 {
 	get_current()->setbrg();
 }
 
+/**
+ * serial_getc() - Read character from currently selected serial port
+ *
+ * This function retrieves a character from currently selected serial
+ * port. In case there is no character waiting on the serial port,
+ * this function will block and wait for the character to appear. This
+ * function uses the get_current() call to determine which port is
+ * selected.
+ *
+ * Returns the character on success, negative on error.
+ */
 int serial_getc(void)
 {
 	return get_current()->getc();
 }
 
+/**
+ * serial_tstc() - Test if data is available on currently selected serial port
+ *
+ * This function tests if one or more characters are available on
+ * currently selected serial port. This function never blocks. This
+ * function uses the get_current() call to determine which port is
+ * selected.
+ *
+ * Returns positive if character is available, zero otherwise.
+ */
 int serial_tstc(void)
 {
 	return get_current()->tstc();
 }
 
+/**
+ * serial_putc() - Output character via currently selected serial port
+ * @c:	Single character to be output from the serial port.
+ *
+ * This function outputs a character via currently selected serial
+ * port. This character is passed to the serial port driver responsible
+ * for controlling the hardware. The hardware may still be in process
+ * of transmitting another character, therefore this function may block
+ * for a short amount of time. This function uses the get_current()
+ * call to determine which port is selected.
+ */
 void serial_putc(const char c)
 {
 	get_current()->putc(c);
 }
 
+/**
+ * serial_puts() - Output string via currently selected serial port
+ * @s:	Zero-terminated string to be output from the serial port.
+ *
+ * This function outputs a zero-terminated string via currently
+ * selected serial port. This function behaves as an accelerator
+ * in case the hardware can queue multiple characters for transfer.
+ * The whole string that is to be output is available to the function
+ * implementing the hardware manipulation. Transmitting the whole
+ * string may take some time, thus this function may block for some
+ * amount of time. This function uses the get_current() call to
+ * determine which port is selected.
+ */
 void serial_puts(const char *s)
 {
 	get_current()->puts(s);
 }
 
+/**
+ * default_serial_puts() - Output string by calling serial_putc() in loop
+ * @s:	Zero-terminated string to be output from the serial port.
+ *
+ * This function outputs a zero-terminated string by calling serial_putc()
+ * in a loop. Most drivers do not support queueing more than one byte for
+ * transfer, thus this function precisely implements their serial_puts().
+ *
+ * To optimize the number of get_current() calls, this function only
+ * calls get_current() once and then directly accesses the putc() call
+ * of the &struct serial_device .
+ */
+void default_serial_puts(const char *s)
+{
+	struct serial_device *dev = get_current();
+	while (*s)
+		dev->putc(*s++);
+}
+
 #if CONFIG_POST & CONFIG_SYS_POST_UART
 static const int bauds[] = CONFIG_SYS_BAUDRATE_TABLE;
 
+/**
+ * uart_post_test() - Test the currently selected serial port using POST
+ * @flags:	POST framework flags
+ *
+ * Do a loopback test of the currently selected serial port. This
+ * function is only useful in the context of the POST testing framwork.
+ * The serial port is firstly configured into loopback mode and then
+ * characters are sent through it.
+ *
+ * Returns 0 on success, value otherwise.
+ */
 /* Mark weak until post/cpu/.../uart.c migrate over */
 __weak
 int uart_post_test(int flags)
diff --git a/drivers/serial/serial_clps7111.c b/drivers/serial/serial_clps7111.c
deleted file mode 100644
index 65473e8..0000000
--- a/drivers/serial/serial_clps7111.c
+++ /dev/null
@@ -1,141 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-#include <clps7111.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void clps7111_serial_setbrg(void)
-{
-	unsigned int reg = 0;
-
-	switch (gd->baudrate) {
-	case   1200:	reg = 191;	break;
-	case   9600:	reg =  23;	break;
-	case  19200:	reg =  11;	break;
-	case  38400:	reg =   5;	break;
-	case  57600:	reg =   3;	break;
-	case 115200:	reg =   1;	break;
-	default:	hang ();	break;
-	}
-
-	/* init serial serial 1,2 */
-	IO_SYSCON1 = SYSCON1_UART1EN;
-	IO_SYSCON2 = SYSCON2_UART2EN;
-
-	reg |= UBRLCR_WRDLEN8;
-
-	IO_UBRLCR1 = reg;
-	IO_UBRLCR2 = reg;
-}
-
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-static int clps7111_serial_init(void)
-{
-	serial_setbrg ();
-
-	return (0);
-}
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void clps7111_serial_putc(const char c)
-{
-	int tmo;
-
-	/* If \n, also do \r */
-	if (c == '\n')
-		serial_putc ('\r');
-
-	tmo = get_timer (0) + 1 * CONFIG_SYS_HZ;
-	while (IO_SYSFLG1 & SYSFLG1_UTXFF)
-		if (get_timer (0) > tmo)
-			break;
-
-	IO_UARTDR1 = c;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int clps7111_serial_tstc(void)
-{
-	return !(IO_SYSFLG1 & SYSFLG1_URXFE);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int clps7111_serial_getc(void)
-{
-	while (IO_SYSFLG1 & SYSFLG1_URXFE);
-
-	return IO_UARTDR1 & 0xff;
-}
-
-static void clps7111_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-static struct serial_device clps7111_serial_drv = {
-	.name	= "clps7111_serial",
-	.start	= clps7111_serial_init,
-	.stop	= NULL,
-	.setbrg	= clps7111_serial_setbrg,
-	.putc	= clps7111_serial_putc,
-	.puts	= clps7111_serial_puts,
-	.getc	= clps7111_serial_getc,
-	.tstc	= clps7111_serial_tstc,
-};
-
-void clps7111_serial_initialize(void)
-{
-	serial_register(&clps7111_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &clps7111_serial_drv;
-}
diff --git a/drivers/serial/serial_imx.c b/drivers/serial/serial_imx.c
index 6c075b5..9b9be44 100644
--- a/drivers/serial/serial_imx.c
+++ b/drivers/serial/serial_imx.c
@@ -214,20 +214,13 @@
 	return 1;
 }
 
-static void imx_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device imx_serial_drv = {
 	.name	= "imx_serial",
 	.start	= imx_serial_init,
 	.stop	= NULL,
 	.setbrg	= imx_serial_setbrg,
 	.putc	= imx_serial_putc,
-	.puts	= imx_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= imx_serial_getc,
 	.tstc	= imx_serial_tstc,
 };
diff --git a/drivers/serial/serial_ixp.c b/drivers/serial/serial_ixp.c
index c8b3658..09a3df4 100644
--- a/drivers/serial/serial_ixp.c
+++ b/drivers/serial/serial_ixp.c
@@ -121,20 +121,13 @@
 	return (char) RBR(CONFIG_SYS_IXP425_CONSOLE) & 0xff;
 }
 
-static void ixp_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device ixp_serial_drv = {
 	.name	= "ixp_serial",
 	.start	= ixp_serial_init,
 	.stop	= NULL,
 	.setbrg	= ixp_serial_setbrg,
 	.putc	= ixp_serial_putc,
-	.puts	= ixp_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= ixp_serial_getc,
 	.tstc	= ixp_serial_tstc,
 };
diff --git a/drivers/serial/serial_ks8695.c b/drivers/serial/serial_ks8695.c
index 60e8007..8b1c974 100644
--- a/drivers/serial/serial_ks8695.c
+++ b/drivers/serial/serial_ks8695.c
@@ -102,13 +102,6 @@
 	return 0;
 }
 
-static void ks8695_serial_puts(const char *s)
-{
-	char c;
-	while ((c = *s++) != 0)
-		serial_putc(c);
-}
-
 static int ks8695_serial_getc(void)
 {
 	volatile struct ks8695uart *uartp = KS8695_UART_ADDR;
@@ -124,7 +117,7 @@
 	.stop	= NULL,
 	.setbrg	= ks8695_serial_setbrg,
 	.putc	= ks8695_serial_putc,
-	.puts	= ks8695_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= ks8695_serial_getc,
 	.tstc	= ks8695_serial_tstc,
 };
diff --git a/drivers/serial/serial_lh7a40x.c b/drivers/serial/serial_lh7a40x.c
deleted file mode 100644
index 6c96285..0000000
--- a/drivers/serial/serial_lh7a40x.c
+++ /dev/null
@@ -1,204 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-#include <lh7a40x.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CONSOLE_UART1)
-# define UART_CONSOLE 1
-#elif defined(CONFIG_CONSOLE_UART2)
-# define UART_CONSOLE 2
-#elif defined(CONFIG_CONSOLE_UART3)
-# define UART_CONSOLE 3
-#else
-# error "No console configured ... "
-#endif
-
-static void lh7a40x_serial_setbrg(void)
-{
-	lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-	int i;
-	unsigned int reg = 0;
-
-	/*
-	 * userguide 15.1.2.4
-	 *
-	 * BAUDDIV is (UART_REF_FREQ/(16 X BAUD))-1
-	 *
-	 *   UART_REF_FREQ = external system clock input / 2 (Hz)
-	 *   BAUD is desired baudrate (bits/s)
-	 *
-	 *   NOTE: we add (divisor/2) to numerator to round for
-	 *         more precision
-	 */
-	reg = (((get_PLLCLK()/2) + ((16*gd->baudrate)/2)) / (16 * gd->baudrate)) - 1;
-	uart->brcon = reg;
-
-	for (i = 0; i < 100; i++);
-}
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- *
- */
-static int lh7a40x_serial_init(void)
-{
-	lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
-	/* UART must be enabled before writing to any config registers */
-	uart->con |= (UART_EN);
-
-#ifdef CONFIG_CONSOLE_UART1
-	/* infrared disabled */
-	uart->con |= UART_SIRD;
-#endif
-	/* loopback disabled */
-	uart->con &= ~(UART_LBE);
-
-	/* modem lines and tx/rx polarities */
-	uart->con &= ~(UART_MXP | UART_TXP | UART_RXP);
-
-	/* FIFO enable, N81 */
-	uart->fcon = (UART_WLEN_8 | UART_FEN | UART_STP2_1);
-
-	/* set baudrate */
-	serial_setbrg ();
-
-	/* enable rx interrupt */
-	uart->inten |= UART_RI;
-
-	return (0);
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise. When the function is succesfull, the character read is
- * written into its argument c.
- */
-static int lh7a40x_serial_getc(void)
-{
-	lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
-	/* wait for character to arrive */
-	while (uart->status & UART_RXFE);
-
-	return(uart->data & 0xff);
-}
-
-#ifdef CONFIG_HWFLOW
-static int hwflow = 0; /* turned off by default */
-int hwflow_onoff(int on)
-{
-	switch(on) {
-	case 0:
-	default:
-		break; /* return current */
-	case 1:
-		hwflow = 1; /* turn on */
-		break;
-	case -1:
-		hwflow = 0; /* turn off */
-		break;
-	}
-	return hwflow;
-}
-#endif
-
-#ifdef CONFIG_MODEM_SUPPORT
-static int be_quiet = 0;
-void disable_putc(void)
-{
-	be_quiet = 1;
-}
-
-void enable_putc(void)
-{
-	be_quiet = 0;
-}
-#endif
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void lh7a40x_serial_putc(const char c)
-{
-	lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
-#ifdef CONFIG_MODEM_SUPPORT
-	if (be_quiet)
-		return;
-#endif
-
-	/* wait for room in the tx FIFO */
-	while (!(uart->status & UART_TXFE));
-
-#ifdef CONFIG_HWFLOW
-	/* Wait for CTS up */
-	while(hwflow && !(uart->status & UART_CTS));
-#endif
-
-	uart->data = c;
-
-	/* If \n, also do \r */
-	if (c == '\n')
-		serial_putc ('\r');
-}
-
-/*
- * Test whether a character is in the RX buffer
- */
-static int lh7a40x_serial_tstc(void)
-{
-	lh7a40x_uart_t* uart = LH7A40X_UART_PTR(UART_CONSOLE);
-
-	return(!(uart->status & UART_RXFE));
-}
-
-static void lh7a40x_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-static struct serial_device lh7a40x_serial_drv = {
-	.name	= "lh7a40x_serial",
-	.start	= lh7a40x_serial_init,
-	.stop	= NULL,
-	.setbrg	= lh7a40x_serial_setbrg,
-	.putc	= lh7a40x_serial_putc,
-	.puts	= lh7a40x_serial_puts,
-	.getc	= lh7a40x_serial_getc,
-	.tstc	= lh7a40x_serial_tstc,
-};
-
-void lh7a40x_serial_initialize(void)
-{
-	serial_register(&lh7a40x_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &lh7a40x_serial_drv;
-}
diff --git a/drivers/serial/serial_lpc2292.c b/drivers/serial/serial_lpc2292.c
deleted file mode 100644
index fcab202..0000000
--- a/drivers/serial/serial_lpc2292.c
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, <wd@denx.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Alex Zuepke <azu@sysgo.de>
- *
- * Copyright (C) 1999 2000 2001 Erik Mouw (J.A.K.Mouw@its.tudelft.nl)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-#include <asm/arch/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-static void lpc2292_serial_setbrg(void)
-{
-	unsigned short divisor = 0;
-
-	switch (gd->baudrate) {
-	case   1200:	divisor = 3072;	break;
-	case   9600:	divisor =  384;	break;
-	case  19200:	divisor =  192;	break;
-	case  38400:	divisor =   96;	break;
-	case  57600:	divisor =   64;	break;
-	case 115200:	divisor =   32;	break;
-	default:	hang ();	break;
-	}
-
-	/* init serial UART0 */
-	PUT8(U0LCR, 0);
-	PUT8(U0IER, 0);
-	PUT8(U0LCR, 0x80);	/* DLAB=1 */
-	PUT8(U0DLL, (unsigned char)(divisor & 0x00FF));
-	PUT8(U0DLM, (unsigned char)(divisor >> 8));
-	PUT8(U0LCR, 0x03);	/* 8N1, DLAB=0  */
-	PUT8(U0FCR, 1);		/* Enable RX and TX FIFOs */
-}
-
-static int lpc2292_serial_init(void)
-{
-	unsigned long pinsel0;
-
-	serial_setbrg ();
-
-	pinsel0 = GET32(PINSEL0);
-	pinsel0 &= ~(0x00000003);
-	pinsel0 |= 5;
-	PUT32(PINSEL0, pinsel0);
-
-	return (0);
-}
-
-static void lpc2292_serial_putc(const char c)
-{
-	if (c == '\n')
-	{
-		while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */
-		PUT8(U0THR, '\r');
-	}
-
-	while((GET8(U0LSR) & (1<<5)) == 0); /* Wait for empty U0THR */
-	PUT8(U0THR, c);
-}
-
-static int lpc2292_serial_getc(void)
-{
-	while((GET8(U0LSR) & 1) == 0);
-	return GET8(U0RBR);
-}
-
-static void lpc2292_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-/* Test if there is a byte to read */
-static int lpc2292_serial_tstc(void)
-{
-	return (GET8(U0LSR) & 1);
-}
-
-static struct serial_device lpc2292_serial_drv = {
-	.name	= "lpc2292_serial",
-	.start	= lpc2292_serial_init,
-	.stop	= NULL,
-	.setbrg	= lpc2292_serial_setbrg,
-	.putc	= lpc2292_serial_putc,
-	.puts	= lpc2292_serial_puts,
-	.getc	= lpc2292_serial_getc,
-	.tstc	= lpc2292_serial_tstc,
-};
-
-void lpc2292_serial_initialize(void)
-{
-	serial_register(&lpc2292_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &lpc2292_serial_drv;
-}
diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c
index b0612f5..9227d64 100644
--- a/drivers/serial/serial_mxc.c
+++ b/drivers/serial/serial_mxc.c
@@ -187,13 +187,6 @@
 	return 1;
 }
 
-static void mxc_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 /*
  * Initialise the serial port with the given baudrate. The settings
  * are always 8 data bits, no parity, 1 stop bit, no start bits.
@@ -228,7 +221,7 @@
 	.stop	= NULL,
 	.setbrg	= mxc_serial_setbrg,
 	.putc	= mxc_serial_putc,
-	.puts	= mxc_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= mxc_serial_getc,
 	.tstc	= mxc_serial_tstc,
 };
diff --git a/drivers/serial/serial_netarm.c b/drivers/serial/serial_netarm.c
deleted file mode 100644
index d30adc3..0000000
--- a/drivers/serial/serial_netarm.c
+++ /dev/null
@@ -1,211 +0,0 @@
-/*
- * Serial Port stuff - taken from Linux
- *
- * (C) Copyright 2002
- * MAZeT GmbH <www.mazet.de>
- * Stephan Linz <linz@mazet.de>, <linz@li-pro.net>
- *
- * (c) 2004
- * IMMS gGmbH <www.imms.de>
- * Thomas Elste <info@elste.org>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- *
- */
-
-#include <common.h>
-#include <asm/hardware.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#define PORTA	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTA))
-#if !defined(CONFIG_NETARM_NS7520)
-#define PORTB	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTB))
-#else
-#define PORTC	(*(volatile unsigned int *)(NETARM_GEN_MODULE_BASE + NETARM_GEN_PORTC))
-#endif
-
-/* wait until transmitter is ready for another character */
-#define TXWAITRDY(registers)							\
-{										\
-	ulong tmo = get_timer(0) + 1 * CONFIG_SYS_HZ;					\
-	while (((registers)->status_a & NETARM_SER_STATA_TX_RDY) == 0 )	{	\
-		if (get_timer(0) > tmo)						\
-			break;							\
-	}									\
-}
-
-
-volatile netarm_serial_channel_t *serial_reg_ch1 = get_serial_channel(0);
-volatile netarm_serial_channel_t *serial_reg_ch2 = get_serial_channel(1);
-
-extern void _netarm_led_FAIL1(void);
-
-/*
- * Setup both serial i/f with given baudrate
- */
-static void netarm_serial_setbrg(void)
-{
-	/* set 0 ... make sure pins are configured for serial */
-#if !defined(CONFIG_NETARM_NS7520)
-	PORTA = PORTB =
-		NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
-#else
-	PORTA = NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
-	PORTC = NETARM_GEN_PORT_CSF (0xef) | NETARM_GEN_PORT_MODE (0xef) | NETARM_GEN_PORT_DIR (0xe0);
-#endif
-
-	/* first turn em off */
-	serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a = 0;
-
-	/* clear match register, we don't need it */
-	serial_reg_ch1->rx_match = serial_reg_ch2->rx_match = 0;
-
-	/* setup bit rate generator and rx buffer gap timer (1 byte only) */
-	if ((gd->baudrate >= MIN_BAUD_RATE)
-	    && (gd->baudrate <= MAX_BAUD_RATE)) {
-		serial_reg_ch1->bitrate = serial_reg_ch2->bitrate =
-			NETARM_SER_BR_X16 (gd->baudrate);
-		serial_reg_ch1->rx_buf_timer = serial_reg_ch2->rx_buf_timer =
-			0;
-		serial_reg_ch1->rx_char_timer = serial_reg_ch2->rx_char_timer =
-			NETARM_SER_RXGAP (gd->baudrate);
-	} else {
-		hang ();
-	}
-
-	/* setup port mode */
-	serial_reg_ch1->ctrl_b = serial_reg_ch2->ctrl_b =
-		( NETARM_SER_CTLB_RCGT_EN |
-		  NETARM_SER_CTLB_UART_MODE);
-	serial_reg_ch1->ctrl_a = serial_reg_ch2->ctrl_a =
-		( NETARM_SER_CTLA_ENABLE |
-		  NETARM_SER_CTLA_P_NONE |
-		  /* see errata */
-		  NETARM_SER_CTLA_2STOP |
-		  NETARM_SER_CTLA_8BITS |
-		  NETARM_SER_CTLA_DTR_EN |
-		  NETARM_SER_CTLA_RTS_EN);
-}
-
-
-/*
- * Initialise the serial port with the given baudrate. The settings
- * are always 8 data bits, no parity, 1 stop bit, no start bits.
- */
-static int netarm_serial_init(void)
-{
-	serial_setbrg ();
-	return 0;
-}
-
-
-/*
- * Output a single byte to the serial port.
- */
-static void netarm_serial_putc(const char c)
-{
-	volatile unsigned char *fifo;
-
-	/* If \n, also do \r */
-	if (c == '\n')
-		serial_putc ('\r');
-
-	fifo = (volatile unsigned char *) &(serial_reg_ch1->fifo);
-	TXWAITRDY (serial_reg_ch1);
-	*fifo = c;
-}
-
-/*
- * Test of a single byte from the serial port. Returns 1 on success, 0
- * otherwise.
- */
-static int netarm_serial_tstc(void)
-{
-	return serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY;
-}
-
-/*
- * Read a single byte from the serial port. Returns 1 on success, 0
- * otherwise.
- */
-static int netarm_serial_getc(void)
-{
-	unsigned int ch_uint;
-	volatile unsigned int *fifo;
-	volatile unsigned char *fifo_char = NULL;
-	int buf_count = 0;
-
-	while (!(serial_reg_ch1->status_a & NETARM_SER_STATA_RX_RDY))
-		/* NOP */ ;
-
-	fifo = (volatile unsigned int *) &(serial_reg_ch1->fifo);
-	fifo_char = (unsigned char *) &ch_uint;
-	ch_uint = *fifo;
-
-	buf_count = NETARM_SER_STATA_RXFDB (serial_reg_ch1->status_a);
-	switch (buf_count) {
-	case NETARM_SER_STATA_RXFDB_4BYTES:
-		buf_count = 4;
-		break;
-	case NETARM_SER_STATA_RXFDB_3BYTES:
-		buf_count = 3;
-		break;
-	case NETARM_SER_STATA_RXFDB_2BYTES:
-		buf_count = 2;
-		break;
-	case NETARM_SER_STATA_RXFDB_1BYTES:
-		buf_count = 1;
-		break;
-	default:
-		/* panic, be never here */
-		break;
-	}
-
-	serial_reg_ch1->status_a |= NETARM_SER_STATA_RX_CLOSED;
-
-	return ch_uint & 0xff;
-}
-
-static void netarm_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
-static struct serial_device netarm_serial_drv = {
-	.name	= "netarm_serial",
-	.start	= netarm_serial_init,
-	.stop	= NULL,
-	.setbrg	= netarm_serial_setbrg,
-	.putc	= netarm_serial_putc,
-	.puts	= netarm_serial_puts,
-	.getc	= netarm_serial_getc,
-	.tstc	= netarm_serial_tstc,
-};
-
-void netarm_serial_initialize(void)
-{
-	serial_register(&netarm_serial_drv);
-}
-
-__weak struct serial_device *default_serial_console(void)
-{
-	return &netarm_serial_drv;
-}
diff --git a/drivers/serial/serial_ns16550.c b/drivers/serial/serial_ns16550.c
index b5d1248..c1c0134 100644
--- a/drivers/serial/serial_ns16550.c
+++ b/drivers/serial/serial_ns16550.c
@@ -34,7 +34,7 @@
 DECLARE_GLOBAL_DATA_PTR;
 
 #if !defined(CONFIG_CONS_INDEX)
-#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 4)
+#elif (CONFIG_CONS_INDEX < 1) || (CONFIG_CONS_INDEX > 6)
 #error	"Invalid console index value."
 #endif
 
@@ -46,12 +46,16 @@
 #error	"Console port 3 defined but not configured."
 #elif CONFIG_CONS_INDEX == 4 && !defined(CONFIG_SYS_NS16550_COM4)
 #error	"Console port 4 defined but not configured."
+#elif CONFIG_CONS_INDEX == 5 && !defined(CONFIG_SYS_NS16550_COM5)
+#error	"Console port 5 defined but not configured."
+#elif CONFIG_CONS_INDEX == 6 && !defined(CONFIG_SYS_NS16550_COM6)
+#error	"Console port 6 defined but not configured."
 #endif
 
 /* Note: The port number specified in the functions is 1 based.
  *	 the array is 0 based.
  */
-static NS16550_t serial_ports[4] = {
+static NS16550_t serial_ports[6] = {
 #ifdef CONFIG_SYS_NS16550_COM1
 	(NS16550_t)CONFIG_SYS_NS16550_COM1,
 #else
@@ -68,7 +72,17 @@
 	NULL,
 #endif
 #ifdef CONFIG_SYS_NS16550_COM4
-	(NS16550_t)CONFIG_SYS_NS16550_COM4
+	(NS16550_t)CONFIG_SYS_NS16550_COM4,
+#else
+	NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM5
+	(NS16550_t)CONFIG_SYS_NS16550_COM5,
+#else
+	NULL,
+#endif
+#ifdef CONFIG_SYS_NS16550_COM6
+	(NS16550_t)CONFIG_SYS_NS16550_COM6
 #else
 	NULL
 #endif
@@ -78,21 +92,33 @@
 
 /* Multi serial device functions */
 #define DECLARE_ESERIAL_FUNCTIONS(port) \
-    int  eserial##port##_init (void) {\
-	int clock_divisor; \
-	clock_divisor = calc_divisor(serial_ports[port-1]); \
-	NS16550_init(serial_ports[port-1], clock_divisor); \
-	return(0);}\
-    void eserial##port##_setbrg (void) {\
-	serial_setbrg_dev(port);}\
-    int  eserial##port##_getc (void) {\
-	return serial_getc_dev(port);}\
-    int  eserial##port##_tstc (void) {\
-	return serial_tstc_dev(port);}\
-    void eserial##port##_putc (const char c) {\
-	serial_putc_dev(port, c);}\
-    void eserial##port##_puts (const char *s) {\
-	serial_puts_dev(port, s);}
+	static int  eserial##port##_init(void) \
+	{ \
+		int clock_divisor; \
+		clock_divisor = calc_divisor(serial_ports[port-1]); \
+		NS16550_init(serial_ports[port-1], clock_divisor); \
+		return 0 ; \
+	} \
+	static void eserial##port##_setbrg(void) \
+	{ \
+		serial_setbrg_dev(port); \
+	} \
+	static int  eserial##port##_getc(void) \
+	{ \
+		return serial_getc_dev(port); \
+	} \
+	static int  eserial##port##_tstc(void) \
+	{ \
+		return serial_tstc_dev(port); \
+	} \
+	static void eserial##port##_putc(const char c) \
+	{ \
+		serial_putc_dev(port, c); \
+	} \
+	static void eserial##port##_puts(const char *s) \
+	{ \
+		serial_puts_dev(port, s); \
+	}
 
 /* Serial device descriptor */
 #define INIT_ESERIAL_STRUCTURE(port, __name) {	\
@@ -231,6 +257,12 @@
 DECLARE_ESERIAL_FUNCTIONS(4);
 struct serial_device eserial4_device =
 	INIT_ESERIAL_STRUCTURE(4, "eserial3");
+DECLARE_ESERIAL_FUNCTIONS(5);
+struct serial_device eserial5_device =
+	INIT_ESERIAL_STRUCTURE(5, "eserial4");
+DECLARE_ESERIAL_FUNCTIONS(6);
+struct serial_device eserial6_device =
+	INIT_ESERIAL_STRUCTURE(6, "eserial5");
 
 __weak struct serial_device *default_serial_console(void)
 {
@@ -242,6 +274,10 @@
 	return &eserial3_device;
 #elif CONFIG_CONS_INDEX == 4
 	return &eserial4_device;
+#elif CONFIG_CONS_INDEX == 5
+	return &eserial5_device;
+#elif CONFIG_CONS_INDEX == 6
+	return &eserial6_device;
 #else
 #error "Bad CONFIG_CONS_INDEX."
 #endif
@@ -261,4 +297,10 @@
 #if defined(CONFIG_SYS_NS16550_COM4)
 	serial_register(&eserial4_device);
 #endif
+#if defined(CONFIG_SYS_NS16550_COM5)
+	serial_register(&eserial5_device);
+#endif
+#if defined(CONFIG_SYS_NS16550_COM6)
+	serial_register(&eserial6_device);
+#endif
 }
diff --git a/drivers/serial/serial_pl01x.c b/drivers/serial/serial_pl01x.c
index 7db7b65..b331be7 100644
--- a/drivers/serial/serial_pl01x.c
+++ b/drivers/serial/serial_pl01x.c
@@ -179,13 +179,6 @@
 	pl01x_putc (CONSOLE_PORT, c);
 }
 
-static void pl01x_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static int pl01x_serial_getc(void)
 {
 	return pl01x_getc (CONSOLE_PORT);
@@ -259,7 +252,7 @@
 	.stop	= NULL,
 	.setbrg	= pl01x_serial_setbrg,
 	.putc	= pl01x_serial_putc,
-	.puts	= pl01x_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= pl01x_serial_getc,
 	.tstc	= pl01x_serial_tstc,
 };
diff --git a/drivers/serial/serial_s3c44b0.c b/drivers/serial/serial_s3c44b0.c
index a4428e0..9cae843 100644
--- a/drivers/serial/serial_s3c44b0.c
+++ b/drivers/serial/serial_s3c44b0.c
@@ -209,20 +209,13 @@
 	}
 }
 
-static void s3c44b0_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device s3c44b0_serial_drv = {
 	.name	= "s3c44b0_serial",
 	.start	= s3c44b0_serial_init,
 	.stop	= NULL,
 	.setbrg	= s3c44b0_serial_setbrg,
 	.putc	= s3c44b0_serial_putc,
-	.puts	= s3c44b0_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= s3c44b0_serial_getc,
 	.tstc	= s3c44b0_serial_tstc,
 };
diff --git a/drivers/serial/serial_sa1100.c b/drivers/serial/serial_sa1100.c
index c6b34db..3c0f4c5 100644
--- a/drivers/serial/serial_sa1100.c
+++ b/drivers/serial/serial_sa1100.c
@@ -153,20 +153,13 @@
 #endif
 }
 
-static void sa1100_serial_puts(const char *s)
-{
-	while (*s) {
-		serial_putc (*s++);
-	}
-}
-
 static struct serial_device sa1100_serial_drv = {
 	.name	= "sa1100_serial",
 	.start	= sa1100_serial_init,
 	.stop	= NULL,
 	.setbrg	= sa1100_serial_setbrg,
 	.putc	= sa1100_serial_putc,
-	.puts	= sa1100_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= sa1100_serial_getc,
 	.tstc	= sa1100_serial_tstc,
 };
diff --git a/drivers/serial/serial_sh.c b/drivers/serial/serial_sh.c
index 1ddfc7d..3c931d0 100644
--- a/drivers/serial/serial_sh.c
+++ b/drivers/serial/serial_sh.c
@@ -136,13 +136,6 @@
 	serial_raw_putc(c);
 }
 
-static void sh_serial_puts(const char *s)
-{
-	char c;
-	while ((c = *s++) != 0)
-		serial_putc(c);
-}
-
 static int sh_serial_tstc(void)
 {
 	return serial_rx_fifo_level() ? 1 : 0;
@@ -196,7 +189,7 @@
 	.stop	= NULL,
 	.setbrg	= sh_serial_setbrg,
 	.putc	= sh_serial_putc,
-	.puts	= sh_serial_puts,
+	.puts	= default_serial_puts,
 	.getc	= sh_serial_getc,
 	.tstc	= sh_serial_tstc,
 };
diff --git a/drivers/spi/fsl_espi.c b/drivers/spi/fsl_espi.c
index a1ebd33..eb99e90 100644
--- a/drivers/spi/fsl_espi.c
+++ b/drivers/spi/fsl_espi.c
@@ -216,10 +216,8 @@
 			return 1;
 		}
 		memcpy(buffer, cmd_buf, cmd_len);
-		if (cmd_len != 1) {
-			if (data_in == NULL)
-				memcpy(buffer + cmd_len, data_out, data_len);
-		}
+		if (data_in == NULL)
+			memcpy(buffer + cmd_len, data_out, data_len);
 		break;
 	case SPI_XFER_BEGIN | SPI_XFER_END:
 		len = data_len;
diff --git a/drivers/spi/omap3_spi.c b/drivers/spi/omap3_spi.c
index e40a632..6791a7e 100644
--- a/drivers/spi/omap3_spi.c
+++ b/drivers/spi/omap3_spi.c
@@ -173,14 +173,13 @@
 	/* standard 4-wire master mode:	SCK, MOSI/out, MISO/in, nCS
 	 * REVISIT: this controller could support SPI_3WIRE mode.
 	 */
-#ifdef CONFIG_AM33XX
+#ifdef CONFIG_OMAP3_SPI_D0_D1_SWAPPED
 	/*
-	 * The reference design on AM33xx has D0 and D1 wired up opposite
-	 * of how it has been done on previous platforms.  We assume that
-	 * custom hardware will also follow this convention.
+	 * Some boards have D0 wired as MOSI / D1 as MISO instead of
+	 * The normal D0 as MISO / D1 as MOSI.
 	 */
-	conf &= OMAP3_MCSPI_CHCONF_DPE0;
-	conf |= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
+	conf &= ~OMAP3_MCSPI_CHCONF_DPE0;
+	conf |= OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1;
 #else
 	conf &= ~(OMAP3_MCSPI_CHCONF_IS|OMAP3_MCSPI_CHCONF_DPE1);
 	conf |= OMAP3_MCSPI_CHCONF_DPE0;
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 1e187e5..8b24e00 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -1978,8 +1978,8 @@
 			p = q;
 		}
 
-		if (i == 6) /* it looks ok */
-			return 1;
+		/* Now check the contents. */
+		return is_valid_ether_addr(ea);
 	}
 	return 0;
 }
diff --git a/drivers/usb/gadget/gadget_chips.h b/drivers/usb/gadget/gadget_chips.h
index 5d7b638..02cae0f 100644
--- a/drivers/usb/gadget/gadget_chips.h
+++ b/drivers/usb/gadget/gadget_chips.h
@@ -58,12 +58,6 @@
 #define	gadget_is_sa1100(g)	0
 #endif
 
-#ifdef CONFIG_USB_GADGET_LH7A40X
-#define	gadget_is_lh7a40x(g)	(!strcmp("lh7a40x_udc", (g)->name))
-#else
-#define	gadget_is_lh7a40x(g)	0
-#endif
-
 /* handhelds.org tree (?) */
 #ifdef CONFIG_USB_GADGET_MQ11XX
 #define	gadget_is_mq11xx(g)	(!strcmp("mq11xx_udc", (g)->name))
@@ -195,33 +189,31 @@
 		return 0x07;
 	else if (gadget_is_omap(gadget))
 		return 0x08;
-	else if (gadget_is_lh7a40x(gadget))
-		return 0x09;
 	else if (gadget_is_n9604(gadget))
-		return 0x10;
+		return 0x09;
 	else if (gadget_is_pxa27x(gadget))
-		return 0x11;
+		return 0x10;
 	else if (gadget_is_s3c2410(gadget))
-		return 0x12;
+		return 0x11;
 	else if (gadget_is_at91(gadget))
-		return 0x13;
+		return 0x12;
 	else if (gadget_is_imx(gadget))
-		return 0x14;
+		return 0x13;
 	else if (gadget_is_musbhsfc(gadget))
-		return 0x15;
+		return 0x14;
 	else if (gadget_is_musbhdrc(gadget))
-		return 0x16;
+		return 0x15;
 	else if (gadget_is_mpc8272(gadget))
-		return 0x17;
+		return 0x16;
 	else if (gadget_is_atmel_usba(gadget))
-		return 0x18;
+		return 0x17;
 	else if (gadget_is_fsl_usb2(gadget))
-		return 0x19;
+		return 0x18;
 	else if (gadget_is_amd5536udc(gadget))
-		return 0x20;
+		return 0x19;
 	else if (gadget_is_m66592(gadget))
-		return 0x21;
+		return 0x20;
 	else if (gadget_is_mv(gadget))
-		return 0x22;
+		return 0x21;
 	return -ENOENT;
 }
diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
index bcb4662..6c94794 100644
--- a/drivers/usb/host/Makefile
+++ b/drivers/usb/host/Makefile
@@ -33,6 +33,7 @@
 COBJS-$(CONFIG_USB_R8A66597_HCD) += r8a66597-hcd.o
 COBJS-$(CONFIG_USB_S3C64XX) += s3c64xx-hcd.o
 COBJS-$(CONFIG_USB_SL811HS) += sl811-hcd.o
+COBJS-$(CONFIG_USB_OHCI_S3C24XX) += ohci-s3c24xx.o
 
 # echi
 COBJS-$(CONFIG_USB_EHCI) += ehci-hcd.o
diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index 7b8f033..f54b408 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c
@@ -30,6 +30,18 @@
 
 #include "ehci.h"
 
+/* Check USB PHY clock valid */
+static int usb_phy_clk_valid(struct usb_ehci *ehci)
+{
+	if (!((in_be32(&ehci->control) & PHY_CLK_VALID) ||
+			in_be32(&ehci->prictrl))) {
+		printf("USB PHY clock invalid!\n");
+		return 0;
+	} else {
+		return 1;
+	}
+}
+
 /*
  * Create the appropriate control structures to manage
  * a new EHCI host controller.
@@ -82,18 +94,16 @@
 		udelay(1000); /* delay required for PHY Clk to appear */
 #endif
 		out_le32(&(*hcor)->or_portsc[0], PORT_PTS_UTMI);
+		setbits_be32(&ehci->control, USB_EN);
 	} else {
-#if defined(CONFIG_SYS_FSL_USB_INTERNAL_UTMI_PHY)
-		clrbits_be32(&ehci->control, UTMI_PHY_EN);
 		setbits_be32(&ehci->control, PHY_CLK_SEL_ULPI);
+		clrsetbits_be32(&ehci->control, UTMI_PHY_EN, USB_EN);
 		udelay(1000); /* delay required for PHY Clk to appear */
-#endif
+		if (!usb_phy_clk_valid(ehci))
+			return -EINVAL;
 		out_le32(&(*hcor)->or_portsc[0], PORT_PTS_ULPI);
 	}
 
-	/* Enable interface. */
-	setbits_be32(&ehci->control, USB_EN);
-
 	out_be32(&ehci->prictrl, 0x0000000c);
 	out_be32(&ehci->age_cnt_limit, 0x00000040);
 	out_be32(&ehci->sictrl, 0x00000001);
diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c b/drivers/usb/host/ohci-s3c24xx.c
similarity index 96%
rename from arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
rename to drivers/usb/host/ohci-s3c24xx.c
index 944bb32..03cd4c3 100644
--- a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.c
+++ b/drivers/usb/host/ohci-s3c24xx.c
@@ -42,7 +42,7 @@
 #include <asm/io.h>
 #include <malloc.h>
 #include <usb.h>
-#include "usb_ohci.h"
+#include "ohci-s3c24xx.h"
 
 #define OHCI_USE_NPS		/* force NoPowerSwitching mode */
 #undef OHCI_VERBOSE_DEBUG	/* not always helpful */
@@ -1755,3 +1755,47 @@
 }
 
 #endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_S3C24X0) */
+
+#if defined(CONFIG_USB_OHCI_NEW) && \
+    defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
+    defined(CONFIG_S3C24X0)
+
+int usb_cpu_init(void)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	struct s3c24x0_gpio *gpio = s3c24x0_get_base_gpio();
+
+	/*
+	 * Set the 48 MHz UPLL clocking. Values are taken from
+	 * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
+	 */
+	writel((40 << 12) + (1 << 4) + 2, &clk_power->upllcon);
+	/* 1 = use pads related USB for USB host */
+	writel(readl(&gpio->misccr) | 0x8, &gpio->misccr);
+
+	/*
+	 * Enable USB host clock.
+	 */
+	writel(readl(&clk_power->clkcon) | (1 << 4), &clk_power->clkcon);
+
+	return 0;
+}
+
+int usb_cpu_stop(void)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	/* may not want to do this */
+	writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
+	return 0;
+}
+
+int usb_cpu_init_fail(void)
+{
+	struct s3c24x0_clock_power *clk_power = s3c24x0_get_base_clock_power();
+	writel(readl(&clk_power->clkcon) & ~(1 << 4), &clk_power->clkcon);
+	return 0;
+}
+
+#endif /* defined(CONFIG_USB_OHCI_NEW) && \
+	   defined(CONFIG_SYS_USB_OHCI_CPU_INIT) && \
+	   defined(CONFIG_S3C24X0) */
diff --git a/arch/arm/cpu/arm920t/s3c24x0/usb_ohci.h b/drivers/usb/host/ohci-s3c24xx.h
similarity index 100%
rename from arch/arm/cpu/arm920t/s3c24x0/usb_ohci.h
rename to drivers/usb/host/ohci-s3c24xx.h
diff --git a/drivers/usb/musb/musb_udc.c b/drivers/usb/musb/musb_udc.c
index 09cdec3..e0b4217 100644
--- a/drivers/usb/musb/musb_udc.c
+++ b/drivers/usb/musb/musb_udc.c
@@ -640,8 +640,17 @@
 
 static void musb_peri_rx_ep(unsigned int ep)
 {
-	u16 peri_rxcount = readw(&musbr->ep[ep].epN.rxcount);
+	u16 peri_rxcount;
+	u8 peri_rxcsr = readw(&musbr->ep[ep].epN.rxcsr);
 
+	if (!(peri_rxcsr & MUSB_RXCSR_RXPKTRDY)) {
+		if (debug_level > 0)
+			serial_printf("ERROR : %s %d without MUSB_RXCSR_RXPKTRDY set\n",
+				      __PRETTY_FUNCTION__, ep);
+		return;
+	}
+
+	peri_rxcount = readw(&musbr->ep[ep].epN.rxcount);
 	if (peri_rxcount) {
 		struct usb_endpoint_instance *endpoint;
 		u32 length;
diff --git a/drivers/video/cfb_console.c b/drivers/video/cfb_console.c
index 9f7794f..9c67b63 100644
--- a/drivers/video/cfb_console.c
+++ b/drivers/video/cfb_console.c
@@ -385,6 +385,13 @@
 
 static int cfb_do_flush_cache;
 
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+static char ansi_buf[10];
+static int ansi_buf_size;
+static int ansi_colors_need_revert;
+static int ansi_cursor_hidden;
+#endif
+
 static const int video_font_draw_table8[] = {
 	0x00000000, 0x000000ff, 0x0000ff00, 0x0000ffff,
 	0x00ff0000, 0x00ff00ff, 0x00ffff00, 0x00ffffff,
@@ -768,9 +775,97 @@
 	}
 }
 
-static void console_newline(void)
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+
+static void console_clear(void)
 {
-	console_row++;
+#ifdef VIDEO_HW_RECTFILL
+	video_hw_rectfill(VIDEO_PIXEL_SIZE,	/* bytes per pixel */
+			  0,			/* dest pos x */
+			  video_logo_height,	/* dest pos y */
+			  VIDEO_VISIBLE_COLS,	/* frame width */
+			  VIDEO_VISIBLE_ROWS,	/* frame height */
+			  bgx			/* fill color */
+	);
+#else
+	memsetl(CONSOLE_ROW_FIRST, CONSOLE_SIZE, bgx);
+#endif
+}
+
+static void console_cursor_fix(void)
+{
+	if (console_row < 0)
+		console_row = 0;
+	if (console_row >= CONSOLE_ROWS)
+		console_row = CONSOLE_ROWS - 1;
+	if (console_col < 0)
+		console_col = 0;
+	if (console_col >= CONSOLE_COLS)
+		console_col = CONSOLE_COLS - 1;
+}
+
+static void console_cursor_up(int n)
+{
+	console_row -= n;
+	console_cursor_fix();
+}
+
+static void console_cursor_down(int n)
+{
+	console_row += n;
+	console_cursor_fix();
+}
+
+static void console_cursor_left(int n)
+{
+	console_col -= n;
+	console_cursor_fix();
+}
+
+static void console_cursor_right(int n)
+{
+	console_col += n;
+	console_cursor_fix();
+}
+
+static void console_cursor_set_position(int row, int col)
+{
+	if (console_row != -1)
+		console_row = row;
+	if (console_col != -1)
+		console_col = col;
+	console_cursor_fix();
+}
+
+static void console_previousline(int n)
+{
+	/* FIXME: also scroll terminal ? */
+	console_row -= n;
+	console_cursor_fix();
+}
+
+static void console_swap_colors(void)
+{
+	eorx = fgx;
+	fgx = bgx;
+	bgx = eorx;
+	eorx = fgx ^ bgx;
+}
+
+static inline int console_cursor_is_visible(void)
+{
+	return !ansi_cursor_hidden;
+}
+#else
+static inline int console_cursor_is_visible(void)
+{
+	return 1;
+}
+#endif
+
+static void console_newline(int n)
+{
+	console_row += n;
 	console_col = 0;
 
 	/* Check if we need to scroll the terminal */
@@ -779,7 +874,7 @@
 		console_scrollup();
 
 		/* Decrement row number */
-		console_row--;
+		console_row = CONSOLE_ROWS - 1;
 	}
 }
 
@@ -788,11 +883,12 @@
 	console_col = 0;
 }
 
-void video_putc(const char c)
+static void parse_putc(const char c)
 {
 	static int nl = 1;
 
-	CURSOR_OFF;
+	if (console_cursor_is_visible())
+		CURSOR_OFF;
 
 	switch (c) {
 	case 13:		/* back to first column */
@@ -801,7 +897,7 @@
 
 	case '\n':		/* next line */
 		if (console_col || (!console_col && nl))
-			console_newline();
+			console_newline(1);
 		nl = 1;
 		break;
 
@@ -810,7 +906,7 @@
 		console_col &= ~0x0007;
 
 		if (console_col >= CONSOLE_COLS)
-			console_newline();
+			console_newline(1);
 		break;
 
 	case 8:		/* backspace */
@@ -827,11 +923,225 @@
 
 		/* check for newline */
 		if (console_col >= CONSOLE_COLS) {
-			console_newline();
+			console_newline(1);
 			nl = 0;
 		}
 	}
-	CURSOR_SET;
+
+	if (console_cursor_is_visible())
+		CURSOR_SET;
+}
+
+void video_putc(const char c)
+{
+#ifdef CONFIG_CFB_CONSOLE_ANSI
+	int i;
+
+	if (c == 27) {
+		for (i = 0; i < ansi_buf_size; ++i)
+			parse_putc(ansi_buf[i]);
+		ansi_buf[0] = 27;
+		ansi_buf_size = 1;
+		return;
+	}
+
+	if (ansi_buf_size > 0) {
+		/*
+		 * 0 - ESC
+		 * 1 - [
+		 * 2 - num1
+		 * 3 - ..
+		 * 4 - ;
+		 * 5 - num2
+		 * 6 - ..
+		 * - cchar
+		 */
+		int next = 0;
+
+		int flush = 0;
+		int fail = 0;
+
+		int num1 = 0;
+		int num2 = 0;
+		int cchar = 0;
+
+		ansi_buf[ansi_buf_size++] = c;
+
+		if (ansi_buf_size >= sizeof(ansi_buf))
+			fail = 1;
+
+		for (i = 0; i < ansi_buf_size; ++i) {
+			if (fail)
+				break;
+
+			switch (next) {
+			case 0:
+				if (ansi_buf[i] == 27)
+					next = 1;
+				else
+					fail = 1;
+				break;
+
+			case 1:
+				if (ansi_buf[i] == '[')
+					next = 2;
+				else
+					fail = 1;
+				break;
+
+			case 2:
+				if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+					num1 = ansi_buf[i]-'0';
+					next = 3;
+				} else if (ansi_buf[i] != '?') {
+					--i;
+					num1 = 1;
+					next = 4;
+				}
+				break;
+
+			case 3:
+				if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+					num1 *= 10;
+					num1 += ansi_buf[i]-'0';
+				} else {
+					--i;
+					next = 4;
+				}
+				break;
+
+			case 4:
+				if (ansi_buf[i] != ';') {
+					--i;
+					next = 7;
+				} else
+					next = 5;
+				break;
+
+			case 5:
+				if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+					num2 = ansi_buf[i]-'0';
+					next = 6;
+				} else
+					fail = 1;
+				break;
+
+			case 6:
+				if (ansi_buf[i] >= '0' && ansi_buf[i] <= '9') {
+					num2 *= 10;
+					num2 += ansi_buf[i]-'0';
+				} else {
+					--i;
+					next = 7;
+				}
+				break;
+
+			case 7:
+				if ((ansi_buf[i] >= 'A' && ansi_buf[i] <= 'H')
+					|| ansi_buf[i] == 'J'
+					|| ansi_buf[i] == 'K'
+					|| ansi_buf[i] == 'h'
+					|| ansi_buf[i] == 'l'
+					|| ansi_buf[i] == 'm') {
+					cchar = ansi_buf[i];
+					flush = 1;
+				} else
+					fail = 1;
+				break;
+			}
+		}
+
+		if (fail) {
+			for (i = 0; i < ansi_buf_size; ++i)
+				parse_putc(ansi_buf[i]);
+			ansi_buf_size = 0;
+			return;
+		}
+
+		if (flush) {
+			if (!ansi_cursor_hidden)
+				CURSOR_OFF;
+			ansi_buf_size = 0;
+			switch (cchar) {
+			case 'A':
+				/* move cursor num1 rows up */
+				console_cursor_up(num1);
+				break;
+			case 'B':
+				/* move cursor num1 rows down */
+				console_cursor_down(num1);
+				break;
+			case 'C':
+				/* move cursor num1 columns forward */
+				console_cursor_right(num1);
+				break;
+			case 'D':
+				/* move cursor num1 columns back */
+				console_cursor_left(num1);
+				break;
+			case 'E':
+				/* move cursor num1 rows up at begin of row */
+				console_previousline(num1);
+				break;
+			case 'F':
+				/* move cursor num1 rows down at begin of row */
+				console_newline(num1);
+				break;
+			case 'G':
+				/* move cursor to column num1 */
+				console_cursor_set_position(-1, num1-1);
+				break;
+			case 'H':
+				/* move cursor to row num1, column num2 */
+				console_cursor_set_position(num1-1, num2-1);
+				break;
+			case 'J':
+				/* clear console and move cursor to 0, 0 */
+				console_clear();
+				console_cursor_set_position(0, 0);
+				break;
+			case 'K':
+				/* clear line */
+				if (num1 == 0)
+					console_clear_line(console_row,
+							console_col,
+							CONSOLE_COLS-1);
+				else if (num1 == 1)
+					console_clear_line(console_row,
+							0, console_col);
+				else
+					console_clear_line(console_row,
+							0, CONSOLE_COLS-1);
+				break;
+			case 'h':
+				ansi_cursor_hidden = 0;
+				break;
+			case 'l':
+				ansi_cursor_hidden = 1;
+				break;
+			case 'm':
+				if (num1 == 0) { /* reset swapped colors */
+					if (ansi_colors_need_revert) {
+						console_swap_colors();
+						ansi_colors_need_revert = 0;
+					}
+				} else if (num1 == 7) { /* once swap colors */
+					if (!ansi_colors_need_revert) {
+						console_swap_colors();
+						ansi_colors_need_revert = 1;
+					}
+				}
+				break;
+			}
+			if (!ansi_cursor_hidden)
+				CURSOR_SET;
+		}
+	} else {
+		parse_putc(c);
+	}
+#else
+	parse_putc(c);
+#endif
 }
 
 void video_puts(const char *s)
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 5579bf2..923acb9 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -27,6 +27,7 @@
 
 COBJS-$(CONFIG_AT91SAM9_WATCHDOG) += at91sam9_wdt.o
 COBJS-$(CONFIG_FTWDT010_WATCHDOG) += ftwdt010_wdt.o
+COBJS-$(CONFIG_TNETV107X_WATCHDOG) += tnetv107x_wdt.o
 
 COBJS	:= $(COBJS-y)
 SRCS	:= $(COBJS:.o=.c)
diff --git a/arch/arm/cpu/arm1176/tnetv107x/wdt.c b/drivers/watchdog/tnetv107x_wdt.c
similarity index 100%
rename from arch/arm/cpu/arm1176/tnetv107x/wdt.c
rename to drivers/watchdog/tnetv107x_wdt.c
diff --git a/examples/standalone/mips64.lds b/examples/standalone/mips64.lds
new file mode 100644
index 0000000..9b27ef4
--- /dev/null
+++ b/examples/standalone/mips64.lds
@@ -0,0 +1,59 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk Engineering, <wd@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+*/
+OUTPUT_FORMAT("elf64-tradbigmips", "elf64-tradbigmips", "elf64-tradlittlemips")
+OUTPUT_ARCH(mips)
+SECTIONS
+{
+	.text       :
+	{
+	  *(.text*)
+	}
+
+	. = ALIGN(4);
+	.rodata  : { *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) }
+
+	. = ALIGN(4);
+	.data  : { *(.data*) }
+
+	. = .;
+	_gp = ALIGN(16) + 0x7ff0;
+
+	.got : {
+	  __got_start = .;
+	  *(.got)
+	  __got_end = .;
+	}
+
+	.sdata  : { *(.sdata*) }
+
+	. = ALIGN(4);
+	__bss_start = .;
+	.sbss (NOLOAD) : { *(.sbss*) }
+	.bss (NOLOAD)  : { *(.bss*) . = ALIGN(4); }
+
+	_end = .;
+}
diff --git a/examples/standalone/sparc.lds b/examples/standalone/sparc.lds
index 9733daa..646b80f 100644
--- a/examples/standalone/sparc.lds
+++ b/examples/standalone/sparc.lds
@@ -46,6 +46,7 @@
 	{
 		*(.data)
 	}
+
 	. = ALIGN(4);
 	__data_end = .;
 
diff --git a/fs/Makefile b/fs/Makefile
index 901e189..d0ab3ae 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -1,6 +1,7 @@
 #
 # (C) Copyright 2000-2006
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
 #
 # See file CREDITS for list of people who contributed to this
 # project.
@@ -20,23 +21,27 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 # MA 02111-1307 USA
 #
-#
 
-subdirs-$(CONFIG_CMD_CRAMFS) := cramfs
-subdirs-$(CONFIG_CMD_EXT4) += ext4
-ifndef CONFIG_CMD_EXT4
-subdirs-$(CONFIG_CMD_EXT2) += ext4
-endif
-subdirs-$(CONFIG_CMD_FAT) += fat
-subdirs-$(CONFIG_CMD_FDOS) += fdos
-subdirs-$(CONFIG_CMD_JFFS2) += jffs2
-subdirs-$(CONFIG_CMD_REISER) += reiserfs
-subdirs-$(CONFIG_YAFFS2) += yaffs2
-subdirs-$(CONFIG_CMD_UBIFS) += ubifs
-subdirs-$(CONFIG_CMD_ZFS) += zfs
+include $(TOPDIR)/config.mk
 
-SUBDIRS	:= $(subdirs-y)
+LIB	= $(obj)libfs.o
 
-$(obj).depend all:
-	@for dir in $(SUBDIRS) ; do \
-		$(MAKE) -C $$dir $@ ; done
+COBJS-y				+= fs.o
+
+COBJS	:= $(COBJS-y)
+SRCS	:= $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+
+all:	$(LIB)
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(call cmd_link_o_target, $(OBJS))
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/etx094/Makefile b/fs/cbfs/Makefile
similarity index 81%
copy from board/etx094/Makefile
copy to fs/cbfs/Makefile
index 6dc495c..2be8a68 100644
--- a/board/etx094/Makefile
+++ b/fs/cbfs/Makefile
@@ -1,7 +1,4 @@
 #
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
 # See file CREDITS for list of people who contributed to this
 # project.
 #
@@ -23,17 +20,19 @@
 
 include $(TOPDIR)/config.mk
 
-LIB	= $(obj)lib$(BOARD).o
+LIB	= $(obj)libcbfs.o
 
-COBJS	= $(BOARD).o flash.o
+COBJS-$(CONFIG_CMD_CBFS)	:= cbfs.o
 
-SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS	:= $(addprefix $(obj),$(COBJS))
-SOBJS	:= $(addprefix $(obj),$(SOBJS))
+SRCS	:= $(COBJS-y:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS-y))
+
+all:	$(LIB)
 
 $(LIB):	$(obj).depend $(OBJS)
 	$(call cmd_link_o_target, $(OBJS))
 
+
 #########################################################################
 
 # defines $(obj).depend target
diff --git a/fs/cbfs/cbfs.c b/fs/cbfs/cbfs.c
new file mode 100644
index 0000000..cae6d56
--- /dev/null
+++ b/fs/cbfs/cbfs.c
@@ -0,0 +1,339 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <cbfs.h>
+#include <malloc.h>
+#include <asm/byteorder.h>
+
+enum cbfs_result file_cbfs_result;
+
+const char *file_cbfs_error(void)
+{
+	switch (file_cbfs_result) {
+	case CBFS_SUCCESS:
+		return "Success";
+	case CBFS_NOT_INITIALIZED:
+		return "CBFS not initialized";
+	case CBFS_BAD_HEADER:
+		return "Bad CBFS header";
+	case CBFS_BAD_FILE:
+		return "Bad CBFS file";
+	case CBFS_FILE_NOT_FOUND:
+		return "File not found";
+	default:
+		return "Unknown";
+	}
+}
+
+
+static const u32 good_magic = 0x4f524243;
+static const u8 good_file_magic[] = "LARCHIVE";
+
+
+static int initialized;
+static struct cbfs_header cbfs_header;
+static struct cbfs_cachenode *file_cache;
+
+/* Do endian conversion on the CBFS header structure. */
+static void swap_header(struct cbfs_header *dest, struct cbfs_header *src)
+{
+	dest->magic = be32_to_cpu(src->magic);
+	dest->version = be32_to_cpu(src->version);
+	dest->rom_size = be32_to_cpu(src->rom_size);
+	dest->boot_block_size = be32_to_cpu(src->boot_block_size);
+	dest->align = be32_to_cpu(src->align);
+	dest->offset = be32_to_cpu(src->offset);
+}
+
+/* Do endian conversion on a CBFS file header. */
+static void swap_file_header(struct cbfs_fileheader *dest,
+			     const struct cbfs_fileheader *src)
+{
+	memcpy(&dest->magic, &src->magic, sizeof(dest->magic));
+	dest->len = be32_to_cpu(src->len);
+	dest->type = be32_to_cpu(src->type);
+	dest->checksum = be32_to_cpu(src->checksum);
+	dest->offset = be32_to_cpu(src->offset);
+}
+
+/*
+ * Given a starting position in memory, scan forward, bounded by a size, and
+ * find the next valid CBFS file. No memory is allocated by this function. The
+ * caller is responsible for allocating space for the new file structure.
+ *
+ * @param start		The location in memory to start from.
+ * @param size		The size of the memory region to search.
+ * @param align		The alignment boundaries to check on.
+ * @param newNode	A pointer to the file structure to load.
+ * @param used		A pointer to the count of of bytes scanned through,
+ *			including the file if one is found.
+ *
+ * @return 1 if a file is found, 0 if one isn't.
+ */
+static int file_cbfs_next_file(u8 *start, u32 size, u32 align,
+			       struct cbfs_cachenode *newNode, u32 *used)
+{
+	struct cbfs_fileheader header;
+
+	*used = 0;
+
+	while (size >= align) {
+		const struct cbfs_fileheader *fileHeader =
+			(const struct cbfs_fileheader *)start;
+		u32 name_len;
+		u32 step;
+
+		/* Check if there's a file here. */
+		if (memcmp(good_file_magic, &(fileHeader->magic),
+				sizeof(fileHeader->magic))) {
+			*used += align;
+			size -= align;
+			start += align;
+			continue;
+		}
+
+		swap_file_header(&header, fileHeader);
+		if (header.offset < sizeof(const struct cbfs_cachenode *) ||
+				header.offset > header.len) {
+			file_cbfs_result = CBFS_BAD_FILE;
+			return -1;
+		}
+		newNode->next = NULL;
+		newNode->type = header.type;
+		newNode->data = start + header.offset;
+		newNode->data_length = header.len;
+		name_len = header.offset - sizeof(struct cbfs_cachenode *);
+		newNode->name = (char *)fileHeader +
+				sizeof(struct cbfs_cachenode *);
+		newNode->name_length = name_len;
+		newNode->checksum = header.checksum;
+
+		step = header.len;
+		if (step % align)
+			step = step + align - step % align;
+
+		*used += step;
+		return 1;
+	}
+	return 0;
+}
+
+/* Look through a CBFS instance and copy file metadata into regular memory. */
+static void file_cbfs_fill_cache(u8 *start, u32 size, u32 align)
+{
+	struct cbfs_cachenode *cache_node;
+	struct cbfs_cachenode *newNode;
+	struct cbfs_cachenode **cache_tail = &file_cache;
+
+	/* Clear out old information. */
+	cache_node = file_cache;
+	while (cache_node) {
+		struct cbfs_cachenode *oldNode = cache_node;
+		cache_node = cache_node->next;
+		free(oldNode);
+	}
+	file_cache = NULL;
+
+	while (size >= align) {
+		int result;
+		u32 used;
+
+		newNode = (struct cbfs_cachenode *)
+				malloc(sizeof(struct cbfs_cachenode));
+		result = file_cbfs_next_file(start, size, align,
+			newNode, &used);
+
+		if (result < 0) {
+			free(newNode);
+			return;
+		} else if (result == 0) {
+			free(newNode);
+			break;
+		}
+		*cache_tail = newNode;
+		cache_tail = &newNode->next;
+
+		size -= used;
+		start += used;
+	}
+	file_cbfs_result = CBFS_SUCCESS;
+}
+
+/* Get the CBFS header out of the ROM and do endian conversion. */
+static int file_cbfs_load_header(uintptr_t end_of_rom,
+				 struct cbfs_header *header)
+{
+	struct cbfs_header *header_in_rom;
+
+	header_in_rom = (struct cbfs_header *)(uintptr_t)
+			*(u32 *)(end_of_rom - 3);
+	swap_header(header, header_in_rom);
+
+	if (header->magic != good_magic || header->offset >
+			header->rom_size - header->boot_block_size) {
+		file_cbfs_result = CBFS_BAD_HEADER;
+		return 1;
+	}
+	return 0;
+}
+
+void file_cbfs_init(uintptr_t end_of_rom)
+{
+	u8 *start_of_rom;
+	initialized = 0;
+
+	if (file_cbfs_load_header(end_of_rom, &cbfs_header))
+		return;
+
+	start_of_rom = (u8 *)(end_of_rom + 1 - cbfs_header.rom_size);
+
+	file_cbfs_fill_cache(start_of_rom + cbfs_header.offset,
+			     cbfs_header.rom_size, cbfs_header.align);
+	if (file_cbfs_result == CBFS_SUCCESS)
+		initialized = 1;
+}
+
+const struct cbfs_header *file_cbfs_get_header(void)
+{
+	if (initialized) {
+		file_cbfs_result = CBFS_SUCCESS;
+		return &cbfs_header;
+	} else {
+		file_cbfs_result = CBFS_NOT_INITIALIZED;
+		return NULL;
+	}
+}
+
+const struct cbfs_cachenode *file_cbfs_get_first(void)
+{
+	if (!initialized) {
+		file_cbfs_result = CBFS_NOT_INITIALIZED;
+		return NULL;
+	} else {
+		file_cbfs_result = CBFS_SUCCESS;
+		return file_cache;
+	}
+}
+
+void file_cbfs_get_next(const struct cbfs_cachenode **file)
+{
+	if (!initialized) {
+		file_cbfs_result = CBFS_NOT_INITIALIZED;
+		file = NULL;
+		return;
+	}
+
+	if (*file)
+		*file = (*file)->next;
+	file_cbfs_result = CBFS_SUCCESS;
+}
+
+const struct cbfs_cachenode *file_cbfs_find(const char *name)
+{
+	struct cbfs_cachenode *cache_node = file_cache;
+
+	if (!initialized) {
+		file_cbfs_result = CBFS_NOT_INITIALIZED;
+		return NULL;
+	}
+
+	while (cache_node) {
+		if (!strcmp(name, cache_node->name))
+			break;
+		cache_node = cache_node->next;
+	}
+	if (!cache_node)
+		file_cbfs_result = CBFS_FILE_NOT_FOUND;
+	else
+		file_cbfs_result = CBFS_SUCCESS;
+
+	return cache_node;
+}
+
+const struct cbfs_cachenode *file_cbfs_find_uncached(uintptr_t end_of_rom,
+						     const char *name)
+{
+	u8 *start;
+	u32 size;
+	u32 align;
+	static struct cbfs_cachenode node;
+
+	if (file_cbfs_load_header(end_of_rom, &cbfs_header))
+		return NULL;
+
+	start = (u8 *)(end_of_rom + 1 - cbfs_header.rom_size);
+	size = cbfs_header.rom_size;
+	align = cbfs_header.align;
+
+	while (size >= align) {
+		int result;
+		u32 used;
+
+		result = file_cbfs_next_file(start, size, align, &node, &used);
+
+		if (result < 0)
+			return NULL;
+		else if (result == 0)
+			break;
+
+		if (!strcmp(name, node.name))
+			return &node;
+
+		size -= used;
+		start += used;
+	}
+	file_cbfs_result = CBFS_FILE_NOT_FOUND;
+	return NULL;
+}
+
+const char *file_cbfs_name(const struct cbfs_cachenode *file)
+{
+	file_cbfs_result = CBFS_SUCCESS;
+	return file->name;
+}
+
+u32 file_cbfs_size(const struct cbfs_cachenode *file)
+{
+	file_cbfs_result = CBFS_SUCCESS;
+	return file->data_length;
+}
+
+u32 file_cbfs_type(const struct cbfs_cachenode *file)
+{
+	file_cbfs_result = CBFS_SUCCESS;
+	return file->type;
+}
+
+long file_cbfs_read(const struct cbfs_cachenode *file, void *buffer,
+		    unsigned long maxsize)
+{
+	u32 size;
+
+	size = file->data_length;
+	if (maxsize && size > maxsize)
+		size = maxsize;
+
+	memcpy(buffer, file->data, size);
+
+	file_cbfs_result = CBFS_SUCCESS;
+	return size;
+}
diff --git a/fs/ext4/Makefile b/fs/ext4/Makefile
index 82cd9ae..bb801f9 100644
--- a/fs/ext4/Makefile
+++ b/fs/ext4/Makefile
@@ -30,11 +30,8 @@
 LIB	= $(obj)libext4fs.o
 
 AOBJS	=
-COBJS-$(CONFIG_CMD_EXT4) := ext4fs.o ext4_common.o dev.o
-ifndef CONFIG_CMD_EXT4
-COBJS-$(CONFIG_CMD_EXT2) := ext4fs.o ext4_common.o dev.o
-endif
-COBJS-$(CONFIG_CMD_EXT4_WRITE) += ext4_journal.o crc16.o
+COBJS-$(CONFIG_FS_EXT4) := ext4fs.o ext4_common.o dev.o
+COBJS-$(CONFIG_EXT4_WRITE) += ext4_journal.o crc16.o
 
 SRCS	:= $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
 OBJS	:= $(addprefix $(obj),$(AOBJS) $(COBJS-y))
diff --git a/fs/ext4/ext4_common.c b/fs/ext4/ext4_common.c
index d6d55b9..323875f 100644
--- a/fs/ext4/ext4_common.c
+++ b/fs/ext4/ext4_common.c
@@ -56,7 +56,7 @@
 struct ext2_inode *g_parent_inode;
 static int symlinknest;
 
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
 uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n)
 {
 	uint32_t res = size / n;
diff --git a/fs/ext4/ext4_common.h b/fs/ext4/ext4_common.h
index f728134..87cab16 100644
--- a/fs/ext4/ext4_common.h
+++ b/fs/ext4/ext4_common.h
@@ -37,7 +37,7 @@
 #include <ext4fs.h>
 #include <malloc.h>
 #include <asm/errno.h>
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
 #include "ext4_journal.h"
 #include "crc16.h"
 #endif
@@ -71,7 +71,7 @@
 int ext4fs_iterate_dir(struct ext2fs_node *dir, char *name,
 			struct ext2fs_node **fnode, int *ftype);
 
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
 uint32_t ext4fs_div_roundup(uint32_t size, uint32_t n);
 int ext4fs_checksum_update(unsigned int i);
 int ext4fs_get_parent_inode_num(const char *dirname, char *dname, int flags);
diff --git a/fs/ext4/ext4fs.c b/fs/ext4/ext4fs.c
index 3a5ef20..06536ba 100644
--- a/fs/ext4/ext4fs.c
+++ b/fs/ext4/ext4fs.c
@@ -196,7 +196,7 @@
 	return ext4fs_read_file(ext4fs_file, 0, len, buf);
 }
 
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
 static void ext4fs_update(void)
 {
 	short i;
diff --git a/fs/fat/Makefile b/fs/fat/Makefile
index 02e6881..969715b 100644
--- a/fs/fat/Makefile
+++ b/fs/fat/Makefile
@@ -24,11 +24,11 @@
 LIB	= $(obj)libfat.o
 
 AOBJS	=
-COBJS-$(CONFIG_CMD_FAT)	:= fat.o
+COBJS-$(CONFIG_FS_FAT)	:= fat.o
 COBJS-$(CONFIG_FAT_WRITE):= fat_write.o
 
 ifndef CONFIG_SPL_BUILD
-COBJS-$(CONFIG_CMD_FAT)	+= file.o
+COBJS-$(CONFIG_FS_FAT)	+= file.o
 endif
 
 SRCS	:= $(AOBJS:.o=.S) $(COBJS-y:.o=.c)
diff --git a/fs/fat/fat.c b/fs/fat/fat.c
index 80156c8..393c378 100644
--- a/fs/fat/fat.c
+++ b/fs/fat/fat.c
@@ -46,7 +46,6 @@
 }
 
 static block_dev_desc_t *cur_dev;
-static unsigned int cur_part_nr;
 static disk_partition_t cur_part_info;
 
 #define DOS_BOOT_MAGIC_OFFSET	0x1fe
@@ -62,43 +61,12 @@
 			cur_part_info.start + block, nr_blocks, buf);
 }
 
-int fat_register_device(block_dev_desc_t * dev_desc, int part_no)
+int fat_set_blk_dev(block_dev_desc_t *dev_desc, disk_partition_t *info)
 {
 	ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buffer, dev_desc->blksz);
 
-	/* First close any currently found FAT filesystem */
-	cur_dev = NULL;
-
-#if (defined(CONFIG_CMD_IDE) || \
-     defined(CONFIG_CMD_SATA) || \
-     defined(CONFIG_CMD_SCSI) || \
-     defined(CONFIG_CMD_USB) || \
-     defined(CONFIG_MMC) || \
-     defined(CONFIG_SYSTEMACE) )
-
-	/* Read the partition table, if present */
-	if (!get_partition_info(dev_desc, part_no, &cur_part_info)) {
-		cur_dev = dev_desc;
-		cur_part_nr = part_no;
-	}
-#endif
-
-	/* Otherwise it might be a superfloppy (whole-disk FAT filesystem) */
-	if (!cur_dev) {
-		if (part_no != 0) {
-			printf("** Partition %d not valid on device %d **\n",
-					part_no, dev_desc->dev);
-			return -1;
-		}
-
-		cur_dev = dev_desc;
-		cur_part_nr = 1;
-		cur_part_info.start = 0;
-		cur_part_info.size = dev_desc->lba;
-		cur_part_info.blksz = dev_desc->blksz;
-		memset(cur_part_info.name, 0, sizeof(cur_part_info.name));
-		memset(cur_part_info.type, 0, sizeof(cur_part_info.type));
-	}
+	cur_dev = dev_desc;
+	cur_part_info = *info;
 
 	/* Make sure it has a valid FAT header */
 	if (disk_read(0, 1, buffer) != 1) {
@@ -122,6 +90,34 @@
 	return -1;
 }
 
+int fat_register_device(block_dev_desc_t *dev_desc, int part_no)
+{
+	disk_partition_t info;
+
+	/* First close any currently found FAT filesystem */
+	cur_dev = NULL;
+
+	/* Read the partition table, if present */
+	if (get_partition_info(dev_desc, part_no, &info)) {
+		if (part_no != 0) {
+			printf("** Partition %d not valid on device %d **\n",
+					part_no, dev_desc->dev);
+			return -1;
+		}
+
+		info.start = 0;
+		info.size = dev_desc->lba;
+		info.blksz = dev_desc->blksz;
+		info.name[0] = 0;
+		info.type[0] = 0;
+		info.bootable = 0;
+#ifdef CONFIG_PARTITION_UUIDS
+		info.uuid[0] = 0;
+#endif
+	}
+
+	return fat_set_blk_dev(dev_desc, &info);
+}
 
 /*
  * Get the first occurence of a directory delimiter ('/' or '\') in a string.
@@ -567,15 +563,16 @@
 }
 
 /* Calculate short name checksum */
-static __u8 mkcksum(const char *str)
+static __u8 mkcksum(const char name[8], const char ext[3])
 {
 	int i;
 
 	__u8 ret = 0;
 
-	for (i = 0; i < 11; i++) {
-		ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + str[i];
-	}
+	for (i = 0; i < sizeof(name); i++)
+		ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + name[i];
+	for (i = 0; i < sizeof(ext); i++)
+		ret = (((ret & 1) << 7) | ((ret & 0xfe) >> 1)) + ext[i];
 
 	return ret;
 }
@@ -678,7 +675,8 @@
 				return NULL;
 			}
 #ifdef CONFIG_SUPPORT_VFAT
-			if (dols && mkcksum(dentptr->name) == prevcksum) {
+			__u8 csum = mkcksum(dentptr->name, dentptr->ext);
+			if (dols && csum == prevcksum) {
 				prevcksum = 0xffff;
 				dentptr++;
 				continue;
@@ -946,13 +944,16 @@
 
 		for (i = 0; i < DIRENTSPERBLOCK; i++) {
 			char s_name[14], l_name[VFAT_MAXLEN_BYTES];
+			__u8 csum;
 
 			l_name[0] = '\0';
 			if (dentptr->name[0] == DELETED_FLAG) {
 				dentptr++;
 				continue;
 			}
-			if ((dentptr->attr & ATTR_VOLUME)) {
+
+			csum = mkcksum(dentptr->name, dentptr->ext);
+			if (dentptr->attr & ATTR_VOLUME) {
 #ifdef CONFIG_SUPPORT_VFAT
 				if ((dentptr->attr & ATTR_VFAT) == ATTR_VFAT &&
 				    (dentptr->name[0] & LAST_LONG_ENTRY_MASK)) {
@@ -1015,8 +1016,7 @@
 				goto exit;
 			}
 #ifdef CONFIG_SUPPORT_VFAT
-			else if (dols == LS_ROOT &&
-				 mkcksum(dentptr->name) == prevcksum) {
+			else if (dols == LS_ROOT && csum == prevcksum) {
 				prevcksum = 0xffff;
 				dentptr++;
 				continue;
@@ -1235,8 +1235,7 @@
 	vol_label[11] = '\0';
 	volinfo.fs_type[5] = '\0';
 
-	printf("Partition %d: Filesystem: %s \"%s\"\n", cur_part_nr,
-		volinfo.fs_type, vol_label);
+	printf("Filesystem: %s \"%s\"\n", volinfo.fs_type, vol_label);
 
 	return 0;
 }
diff --git a/fs/fat/fat_write.c b/fs/fat/fat_write.c
index 5829adf..4a1bda0 100644
--- a/fs/fat/fat_write.c
+++ b/fs/fat/fat_write.c
@@ -335,7 +335,7 @@
 
 	/* Get short file name and checksum value */
 	strncpy(s_name, (*dentptr)->name, 16);
-	checksum = mkcksum(s_name);
+	checksum = mkcksum((*dentptr)->name, (*dentptr)->ext);
 
 	do {
 		memset(slotptr, 0x00, sizeof(dir_slot));
diff --git a/fs/fs.c b/fs/fs.c
new file mode 100644
index 0000000..ff360af
--- /dev/null
+++ b/fs/fs.c
@@ -0,0 +1,323 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <config.h>
+#include <common.h>
+#include <part.h>
+#include <ext4fs.h>
+#include <fat.h>
+#include <fs.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static block_dev_desc_t *fs_dev_desc;
+static disk_partition_t fs_partition;
+static int fs_type = FS_TYPE_ANY;
+
+static inline int fs_ls_unsupported(const char *dirname)
+{
+	printf("** Unrecognized filesystem type **\n");
+	return -1;
+}
+
+static inline int fs_read_unsupported(const char *filename, ulong addr,
+				      int offset, int len)
+{
+	printf("** Unrecognized filesystem type **\n");
+	return -1;
+}
+
+#ifdef CONFIG_FS_FAT
+static int fs_probe_fat(void)
+{
+	return fat_set_blk_dev(fs_dev_desc, &fs_partition);
+}
+
+static void fs_close_fat(void)
+{
+}
+
+#define fs_ls_fat file_fat_ls
+
+static int fs_read_fat(const char *filename, ulong addr, int offset, int len)
+{
+	int len_read;
+
+	len_read = file_fat_read_at(filename, offset,
+				    (unsigned char *)addr, len);
+	if (len_read == -1) {
+		printf("** Unable to read file %s **\n", filename);
+		return -1;
+	}
+
+	return len_read;
+}
+#else
+static inline int fs_probe_fat(void)
+{
+	return -1;
+}
+
+static inline void fs_close_fat(void)
+{
+}
+
+#define fs_ls_fat fs_ls_unsupported
+#define fs_read_fat fs_read_unsupported
+#endif
+
+#ifdef CONFIG_FS_EXT4
+static int fs_probe_ext(void)
+{
+	ext4fs_set_blk_dev(fs_dev_desc, &fs_partition);
+
+	if (!ext4fs_mount(fs_partition.size)) {
+		ext4fs_close();
+		return -1;
+	}
+
+	return 0;
+}
+
+static void fs_close_ext(void)
+{
+	ext4fs_close();
+}
+
+#define fs_ls_ext ext4fs_ls
+
+static int fs_read_ext(const char *filename, ulong addr, int offset, int len)
+{
+	int file_len;
+	int len_read;
+
+	if (offset != 0) {
+		printf("** Cannot support non-zero offset **\n");
+		return -1;
+	}
+
+	file_len = ext4fs_open(filename);
+	if (file_len < 0) {
+		printf("** File not found %s **\n", filename);
+		ext4fs_close();
+		return -1;
+	}
+
+	if (len == 0)
+		len = file_len;
+
+	len_read = ext4fs_read((char *)addr, len);
+	ext4fs_close();
+
+	if (len_read != len) {
+		printf("** Unable to read file %s **\n", filename);
+		return -1;
+	}
+
+	return len_read;
+}
+#else
+static inline int fs_probe_ext(void)
+{
+	return -1;
+}
+
+static inline void fs_close_ext(void)
+{
+}
+
+#define fs_ls_ext fs_ls_unsupported
+#define fs_read_ext fs_read_unsupported
+#endif
+
+static struct {
+	int fstype;
+	int (*probe)(void);
+} fstypes[] = {
+	{
+		.fstype = FS_TYPE_FAT,
+		.probe = fs_probe_fat,
+	},
+	{
+		.fstype = FS_TYPE_EXT,
+		.probe = fs_probe_ext,
+	},
+};
+
+int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype)
+{
+	int part, i;
+#ifdef CONFIG_NEEDS_MANUAL_RELOC
+	static int relocated;
+
+	if (!relocated) {
+		for (i = 0; i < ARRAY_SIZE(fstypes); i++)
+			fstypes[i].probe += gd->reloc_off;
+		relocated = 1;
+	}
+#endif
+
+	part = get_device_and_partition(ifname, dev_part_str, &fs_dev_desc,
+					&fs_partition, 1);
+	if (part < 0)
+		return -1;
+
+	for (i = 0; i < ARRAY_SIZE(fstypes); i++) {
+		if ((fstype != FS_TYPE_ANY) && (fstype != fstypes[i].fstype))
+			continue;
+
+		if (!fstypes[i].probe()) {
+			fs_type = fstypes[i].fstype;
+			return 0;
+		}
+	}
+
+	printf("** Unrecognized filesystem type **\n");
+	return -1;
+}
+
+static void fs_close(void)
+{
+	switch (fs_type) {
+	case FS_TYPE_FAT:
+		fs_close_fat();
+		break;
+	case FS_TYPE_EXT:
+		fs_close_ext();
+		break;
+	default:
+		break;
+	}
+
+	fs_type = FS_TYPE_ANY;
+}
+
+int fs_ls(const char *dirname)
+{
+	int ret;
+
+	switch (fs_type) {
+	case FS_TYPE_FAT:
+		ret = fs_ls_fat(dirname);
+		break;
+	case FS_TYPE_EXT:
+		ret = fs_ls_ext(dirname);
+		break;
+	default:
+		ret = fs_ls_unsupported(dirname);
+		break;
+	}
+
+	fs_close();
+
+	return ret;
+}
+
+int fs_read(const char *filename, ulong addr, int offset, int len)
+{
+	int ret;
+
+	switch (fs_type) {
+	case FS_TYPE_FAT:
+		ret = fs_read_fat(filename, addr, offset, len);
+		break;
+	case FS_TYPE_EXT:
+		ret = fs_read_ext(filename, addr, offset, len);
+		break;
+	default:
+		ret = fs_read_unsupported(filename, addr, offset, len);
+		break;
+	}
+
+	fs_close();
+
+	return ret;
+}
+
+int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+		int fstype, int cmdline_base)
+{
+	unsigned long addr;
+	const char *addr_str;
+	const char *filename;
+	unsigned long bytes;
+	unsigned long pos;
+	int len_read;
+	char buf[12];
+
+	if (argc < 2)
+		return CMD_RET_USAGE;
+	if (argc > 7)
+		return CMD_RET_USAGE;
+
+	if (fs_set_blk_dev(argv[1], (argc >= 3) ? argv[2] : NULL, fstype))
+		return 1;
+
+	if (argc >= 4) {
+		addr = simple_strtoul(argv[3], NULL, cmdline_base);
+	} else {
+		addr_str = getenv("loadaddr");
+		if (addr_str != NULL)
+			addr = simple_strtoul(addr_str, NULL, 16);
+		else
+			addr = CONFIG_SYS_LOAD_ADDR;
+	}
+	if (argc >= 5) {
+		filename = argv[4];
+	} else {
+		filename = getenv("bootfile");
+		if (!filename) {
+			puts("** No boot file defined **\n");
+			return 1;
+		}
+	}
+	if (argc >= 6)
+		bytes = simple_strtoul(argv[5], NULL, cmdline_base);
+	else
+		bytes = 0;
+	if (argc >= 7)
+		pos = simple_strtoul(argv[6], NULL, cmdline_base);
+	else
+		pos = 0;
+
+	len_read = fs_read(filename, addr, pos, bytes);
+	if (len_read <= 0)
+		return 1;
+
+	printf("%d bytes read\n", len_read);
+
+	sprintf(buf, "0x%x", len_read);
+	setenv("filesize", buf);
+
+	return 0;
+}
+
+int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+	int fstype)
+{
+	if (argc < 2)
+		return CMD_RET_USAGE;
+	if (argc > 4)
+		return CMD_RET_USAGE;
+
+	if (fs_set_blk_dev(argv[1], (argc >= 3) ? argv[2] : NULL, fstype))
+		return 1;
+
+	if (fs_ls(argc >= 4 ? argv[3] : "/"))
+		return 1;
+
+	return 0;
+}
diff --git a/fs/yaffs2/ydirectenv.h b/fs/yaffs2/ydirectenv.h
index c912b09..c2ffbfd 100644
--- a/fs/yaffs2/ydirectenv.h
+++ b/fs/yaffs2/ydirectenv.h
@@ -56,8 +56,6 @@
 
 #ifdef NO_inline
 #define inline
-#else
-#define inline __inline__
 #endif
 
 #define cond_resched()  do {} while (0)
diff --git a/fs/zfs/zfs.c b/fs/zfs/zfs.c
index 360f723..2db45b1 100644
--- a/fs/zfs/zfs.c
+++ b/fs/zfs/zfs.c
@@ -2002,49 +2002,6 @@
 	return err;
 }
 
-static int
-zfs_label(device_t device, char **label)
-{
-	char *nvlist;
-	int err;
-	struct zfs_data *data;
-
-	data = zfs_mount(device);
-	if (!data)
-		return ZFS_ERR_BAD_FS;
-
-	err = int_zfs_fetch_nvlist(data, &nvlist);
-	if (err) {
-		zfs_unmount(data);
-		return err;
-	}
-
-	*label = zfs_nvlist_lookup_string(nvlist, ZPOOL_CONFIG_POOL_NAME);
-	free(nvlist);
-	zfs_unmount(data);
-	return ZFS_ERR_NONE;
-}
-
-static int
-zfs_uuid(device_t device, char **uuid)
-{
-	struct zfs_data *data;
-
-	data = zfs_mount(device);
-	if (!data)
-		return ZFS_ERR_BAD_FS;
-
-	*uuid = malloc(17); /* %016llx + nil */
-	if (!*uuid)
-		return ZFS_ERR_OUT_OF_MEMORY;
-
-	/* *uuid = xasprintf ("%016llx", (long long unsigned) data->pool_guid);*/
-	snprintf(*uuid, 17, "%016llx", (long long unsigned) data->pool_guid);
-	zfs_unmount(data);
-
-	return ZFS_ERR_NONE;
-}
-
 /*
  * zfs_open() locates a file in the rootpool by following the
  * MOS and places the dnode of the file in the memory address DNODE.
@@ -2325,14 +2282,6 @@
 	struct zfs_data *data;
 	int err;
 	int isfs;
-#if 0
-	char *label = NULL;
-
-	zfs_label(device, &label);
-	if (label)
-		printf("ZPOOL label '%s'\n",
-			   label);
-#endif
 
 	data = zfs_mount(device);
 	if (!data)
diff --git a/helper.mk b/helper.mk
new file mode 100644
index 0000000..79a1da0
--- /dev/null
+++ b/helper.mk
@@ -0,0 +1,64 @@
+#
+# Copyright (C) 2012 Marek Vasut <marex@denx.de>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+#########################################################################
+
+##
+# make_u_boot_list - Generate contents of u_boot_list section
+# 1:		The name of the resulting file (usually u-boot.lst)
+# 2:		Files to analyze for possible u_boot_list entries
+#
+# This function generates the contents of the u_boot_list section,
+# including all the border symbols for it's subsections. The operation
+# of this function is as follows, numbering goes per lines:
+#
+# 1) Dump the ELF header sections from all files supplied via $(2)
+# 2) Filter out all other stuff that does not belong into .u_boot_list
+#    section.
+# 3) Fix up the lines so that the resulting output is is in format
+#    ".u_boot_list.*".
+# 4) Remove the last .something$, since that only contains the name
+#    of the variable to be put into a subsection. This name is irelevant
+#    for generation of border symbols, thus of no interest, remove it.
+# 5) Take each line and for every dot "." in that line, print the whole
+#    line until that dot "." . This is important so that we have all
+#    parent border symbols generated as well.
+# 6) Load every line and firstly append "\a" at the end and print the
+#    line. Next, append "@" at the end and print the line. Finally,
+#    append "~" at the end of line. This will make sense in conjunction
+#    with 6) and 7).
+# 7) Sort the lines. It is imperative to use LC_COLLATE=C here because
+#    with this, the "\a" symbol is first and "~" symbol is last. Any
+#    other symbols fall inbetween. Symbols like "@", which marks the
+#    end of current line (representing current section) and ".", which
+#    means the line continues and thus represents subsection.
+# 8) With such ordering, all lines ending with "\a" will float at the
+#    begining of all lines with the same prefix. Thus it is easy to
+#    replace "\a" with __start and make it the __start border symbol.
+#    Very similarly for "~", which will be always at the bottom and so
+#    can be replaced by "__end" and made into the __end border symbol.
+#    Finally, every line ending with "@" symbol will be transformed
+#    into " *(SORT(${line}*)); " format, which in the linker parlance
+#    will allow it to trap all symbols relevant to the subsection.
+#
+define make_u_boot_list
+$(1): $(2)
+	$(OBJDUMP) -h $(2) | \
+	sed -n -e '/.*\.u_boot_list[^ ]\+/ ! {d;n}' \
+		-e 's/.*\(\.u_boot_list[^ ]\+\).*$$$$/\1/' \
+		-e 's/\.[^\.]\+$$$$//' \
+		-e ':s /^.\+$$$$/ { p;s/^\(.*\)\.[^\.]*$$$$/\1/;b s }' | \
+	sed -n -e 'h;s/$$$$/\a/p;g;s/$$$$/@/p;g;s/$$$$/~/p;' | \
+	LC_COLLATE=C sort -u | \
+	sed -n -e '/\a$$$$/ { s/\./_/g;s/\a$$$$/__start = .;/p; }'\
+		-e '/~$$$$/ { s/\./_/g;s/~$$$$/__end = .;/p; }'\
+		-e '/@$$$$/ { s/\(.*\)@$$$$/*(SORT(\1.*));/p }' > $(1)
+endef
diff --git a/include/ahci.h b/include/ahci.h
index c4fb9e7..babbdc6 100644
--- a/include/ahci.h
+++ b/include/ahci.h
@@ -51,6 +51,7 @@
 #define HOST_IRQ_STAT		0x08 /* interrupt status */
 #define HOST_PORTS_IMPL		0x0c /* bitmap of implemented ports */
 #define HOST_VERSION		0x10 /* AHCI spec. version compliancy */
+#define HOST_CAP2		0x24 /* host capabilities, extended */
 
 /* HOST_CTL bits */
 #define HOST_RESET		(1 << 0)  /* reset controller; self-clear */
diff --git a/include/ata.h b/include/ata.h
index 3b2d737..a614724 100644
--- a/include/ata.h
+++ b/include/ata.h
@@ -114,6 +114,9 @@
 #define ATA_CMD_WRITE_EXT	0x34	/* Write Sectores (with retries) with 48bit addressing */
 #define ATA_CMD_VRFY_EXT	0x42	/* Read Verify	(with retries)	with 48bit addressing */
 
+#define ATA_CMD_FLUSH 0xE7 /* Flush drive cache */
+#define ATA_CMD_FLUSH_EXT 0xEA /* Flush drive cache, with 48bit addressing */
+
 /*
  * ATAPI Commands
  */
diff --git a/include/atmel_mci.h b/include/atmel_mci.h
index 3dd5d67..c711881 100644
--- a/include/atmel_mci.h
+++ b/include/atmel_mci.h
@@ -38,7 +38,7 @@
 	u32	sdcr;	/* 0x0c */
 	u32	argr;	/* 0x10 */
 	u32	cmdr;	/* 0x14 */
-	u32	_18;	/* 0x18 */
+	u32	blkr;	/* 0x18 */
 	u32	_1c;	/* 0x1c */
 	u32	rspr;	/* 0x20 */
 	u32	rspr1;	/* 0x24 */
@@ -118,6 +118,11 @@
 #define MMCI_TRTYP_OFFSET			19
 #define MMCI_TRTYP_SIZE				2
 
+/* Bitfields in BLKR */
+/* MMCI_BLKLEN_OFFSET/SIZE already defined in MR */
+#define MMCI_BCNT_OFFSET			0
+#define MMCI_BCNT_SIZE			16
+
 /* Bitfields in RSPRx */
 #define MMCI_RSP_OFFSET				0
 #define MMCI_RSP_SIZE				32
diff --git a/include/bouncebuf.h b/include/bouncebuf.h
new file mode 100644
index 0000000..31021c5
--- /dev/null
+++ b/include/bouncebuf.h
@@ -0,0 +1,87 @@
+/*
+ * Generic bounce buffer implementation
+ *
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __INCLUDE_BOUNCEBUF_H__
+#define __INCLUDE_BOUNCEBUF_H__
+
+/*
+ * GEN_BB_READ -- Data are read from the buffer eg. by DMA hardware.
+ * The source buffer is copied into the bounce buffer (if unaligned, otherwise
+ * the source buffer is used directly) upon start() call, then the operation
+ * requiring the aligned transfer happens, then the bounce buffer is lost upon
+ * stop() call.
+ */
+#define GEN_BB_READ	(1 << 0)
+/*
+ * GEN_BB_WRITE -- Data are written into the buffer eg. by DMA hardware.
+ * The source buffer starts in an undefined state upon start() call, then the
+ * operation requiring the aligned transfer happens, then the bounce buffer is
+ * copied into the destination buffer (if unaligned, otherwise destination
+ * buffer is used directly) upon stop() call.
+ */
+#define GEN_BB_WRITE	(1 << 1)
+/*
+ * GEN_BB_RW -- Data are read and written into the buffer eg. by DMA hardware.
+ * The source buffer is copied into the bounce buffer (if unaligned, otherwise
+ * the source buffer is used directly) upon start() call, then the  operation
+ * requiring the aligned transfer happens, then the bounce buffer is  copied
+ * into the destination buffer (if unaligned, otherwise destination buffer is
+ * used directly) upon stop() call.
+ */
+#define GEN_BB_RW	(GEN_BB_READ | GEN_BB_WRITE)
+
+#ifdef CONFIG_BOUNCE_BUFFER
+/**
+ * bounce_buffer_start() -- Start the bounce buffer session
+ * data:	pointer to buffer to be aligned
+ * len:		length of the buffer
+ * backup:	pointer to backup buffer (the original value is stored here if
+ *              needed
+ * flags:	flags describing the transaction, see above.
+ */
+int bounce_buffer_start(void **data, size_t len, void **backup, uint8_t flags);
+/**
+ * bounce_buffer_stop() -- Finish the bounce buffer session
+ * data:	pointer to buffer that was aligned
+ * len:		length of the buffer
+ * backup:	pointer to backup buffer (the original value is stored here if
+ *              needed
+ * flags:	flags describing the transaction, see above.
+ */
+int bounce_buffer_stop(void **data, size_t len, void **backup, uint8_t flags);
+#else
+static inline int bounce_buffer_start(void **data, size_t len, void **backup,
+					uint8_t flags)
+{
+	return 0;
+}
+
+static inline int bounce_buffer_stop(void **data, size_t len, void **backup,
+					uint8_t flags)
+{
+	return 0;
+}
+#endif
+
+#endif
diff --git a/include/cbfs.h b/include/cbfs.h
new file mode 100644
index 0000000..6ea3f35
--- /dev/null
+++ b/include/cbfs.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2011 The Chromium OS Authors. All rights reserved.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CBFS_H
+#define __CBFS_H
+
+#include <compiler.h>
+#include <linux/compiler.h>
+
+enum cbfs_result {
+	CBFS_SUCCESS = 0,
+	CBFS_NOT_INITIALIZED,
+	CBFS_BAD_HEADER,
+	CBFS_BAD_FILE,
+	CBFS_FILE_NOT_FOUND
+};
+
+enum cbfs_filetype {
+	CBFS_TYPE_STAGE = 0x10,
+	CBFS_TYPE_PAYLOAD = 0x20,
+	CBFS_TYPE_OPTIONROM = 0x30,
+	CBFS_TYPE_BOOTSPLASH = 0x40,
+	CBFS_TYPE_RAW = 0x50,
+	CBFS_TYPE_VSA = 0x51,
+	CBFS_TYPE_MBI = 0x52,
+	CBFS_TYPE_MICROCODE = 0x53,
+	CBFS_COMPONENT_CMOS_DEFAULT = 0xaa,
+	CBFS_COMPONENT_CMOS_LAYOUT = 0x01aa
+};
+
+struct cbfs_header {
+	u32 magic;
+	u32 version;
+	u32 rom_size;
+	u32 boot_block_size;
+	u32 align;
+	u32 offset;
+	u32 pad[2];
+} __packed;
+
+struct cbfs_fileheader {
+	u8 magic[8];
+	u32 len;
+	u32 type;
+	u32 checksum;
+	u32 offset;
+} __packed;
+
+struct cbfs_cachenode {
+	struct cbfs_cachenode *next;
+	u32 type;
+	void *data;
+	u32 data_length;
+	char *name;
+	u32 name_length;
+	u32 checksum;
+} __packed;
+
+extern enum cbfs_result file_cbfs_result;
+
+/*
+ * Return a string describing the most recent error condition.
+ *
+ * @return A pointer to the constant string.
+ */
+const char *file_cbfs_error(void);
+
+/*
+ * Initialize the CBFS driver and load metadata into RAM.
+ *
+ * @param end_of_rom	Points to the end of the ROM the CBFS should be read
+ *                      from.
+ */
+void file_cbfs_init(uintptr_t end_of_rom);
+
+/*
+ * Get the header structure for the current CBFS.
+ *
+ * @return A pointer to the constant structure, or NULL if there is none.
+ */
+const struct cbfs_header *file_cbfs_get_header(void);
+
+/*
+ * Get a handle for the first file in CBFS.
+ *
+ * @return A handle for the first file in CBFS, NULL on error.
+ */
+const struct cbfs_cachenode *file_cbfs_get_first(void);
+
+/*
+ * Get a handle to the file after this one in CBFS.
+ *
+ * @param file		A pointer to the handle to advance.
+ */
+void file_cbfs_get_next(const struct cbfs_cachenode **file);
+
+/*
+ * Find a file with a particular name in CBFS.
+ *
+ * @param name		The name to search for.
+ *
+ * @return A handle to the file, or NULL on error.
+ */
+const struct cbfs_cachenode *file_cbfs_find(const char *name);
+
+
+/***************************************************************************/
+/* All of the functions below can be used without first initializing CBFS. */
+/***************************************************************************/
+
+/*
+ * Find a file with a particular name in CBFS without using the heap.
+ *
+ * @param end_of_rom	Points to the end of the ROM the CBFS should be read
+ *                      from.
+ * @param name		The name to search for.
+ *
+ * @return A handle to the file, or NULL on error.
+ */
+const struct cbfs_cachenode *file_cbfs_find_uncached(uintptr_t end_of_rom,
+						     const char *name);
+
+/*
+ * Get the name of a file in CBFS.
+ *
+ * @param file		The handle to the file.
+ *
+ * @return The name of the file, NULL on error.
+ */
+const char *file_cbfs_name(const struct cbfs_cachenode *file);
+
+/*
+ * Get the size of a file in CBFS.
+ *
+ * @param file		The handle to the file.
+ *
+ * @return The size of the file, zero on error.
+ */
+u32 file_cbfs_size(const struct cbfs_cachenode *file);
+
+/*
+ * Get the type of a file in CBFS.
+ *
+ * @param file		The handle to the file.
+ *
+ * @return The type of the file, zero on error.
+ */
+u32 file_cbfs_type(const struct cbfs_cachenode *file);
+
+/*
+ * Read a file from CBFS into RAM
+ *
+ * @param file		A handle to the file to read.
+ * @param buffer	Where to read it into memory.
+ *
+ * @return If positive or zero, the number of characters read. If negative, an
+ *         error occurred.
+ */
+long file_cbfs_read(const struct cbfs_cachenode *file, void *buffer,
+		    unsigned long maxsize);
+
+#endif /* __CBFS_H */
diff --git a/include/clps7111.h b/include/clps7111.h
deleted file mode 100644
index baf6007..0000000
--- a/include/clps7111.h
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- *  linux/include/asm-arm/hardware/clps7111.h
- *
- *  This file contains the hardware definitions of the CLPS7111 internal
- *  registers.
- *
- *  Copyright (C) 2000 Deep Blue Solutions Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-#ifndef __ASM_HARDWARE_CLPS7111_H
-#define __ASM_HARDWARE_CLPS7111_H
-
-#define CLPS7111_PHYS_BASE	(0x80000000)
-
-#ifndef __ASSEMBLY__
-#define clps_readb(off)		__raw_readb(CLPS7111_BASE + (off))
-#define clps_readl(off)		__raw_readl(CLPS7111_BASE + (off))
-#define clps_writeb(val,off)	__raw_writeb(val, CLPS7111_BASE + (off))
-#define clps_writel(val,off)	__raw_writel(val, CLPS7111_BASE + (off))
-#endif
-
-#define PADR		(0x0000)
-#define PBDR		(0x0001)
-#define PDDR		(0x0003)
-#define PADDR		(0x0040)
-#define PBDDR		(0x0041)
-#define PDDDR		(0x0043)
-#define PEDR		(0x0080)
-#define PEDDR		(0x00c0)
-#define SYSCON1		(0x0100)
-#define SYSFLG1		(0x0140)
-#define MEMCFG1		(0x0180)
-#define MEMCFG2		(0x01c0)
-#define DRFPR		(0x0200)
-#define INTSR1		(0x0240)
-#define INTMR1		(0x0280)
-#define LCDCON		(0x02c0)
-#define TC1D		(0x0300)
-#define TC2D		(0x0340)
-#define RTCDR		(0x0380)
-#define RTCMR		(0x03c0)
-#define PMPCON		(0x0400)
-#define CODR		(0x0440)
-#define UARTDR1		(0x0480)
-#define UBRLCR1		(0x04c0)
-#define SYNCIO		(0x0500)
-#define PALLSW		(0x0540)
-#define PALMSW		(0x0580)
-#define STFCLR		(0x05c0)
-#define BLEOI		(0x0600)
-#define MCEOI		(0x0640)
-#define TEOI		(0x0680)
-#define TC1EOI		(0x06c0)
-#define TC2EOI		(0x0700)
-#define RTCEOI		(0x0740)
-#define UMSEOI		(0x0780)
-#define COEOI		(0x07c0)
-#define HALT		(0x0800)
-#define STDBY		(0x0840)
-
-#define FBADDR		(0x1000)
-#define SYSCON2		(0x1100)
-#define SYSFLG2		(0x1140)
-#define INTSR2		(0x1240)
-#define INTMR2		(0x1280)
-#define UARTDR2		(0x1480)
-#define UBRLCR2		(0x14c0)
-#define SS2DR		(0x1500)
-#define SRXEOF		(0x1600)
-#define SS2POP		(0x16c0)
-#define KBDEOI		(0x1700)
-
-/* common bits: SYSCON1 / SYSCON2 */
-#define SYSCON_UARTEN		(1 << 8)
-
-#define SYSCON1_KBDSCAN(x)	((x) & 15)
-#define SYSCON1_KBDSCANMASK	(15)
-#define SYSCON1_TC1M		(1 << 4)
-#define SYSCON1_TC1S		(1 << 5)
-#define SYSCON1_TC2M		(1 << 6)
-#define SYSCON1_TC2S		(1 << 7)
-#define SYSCON1_UART1EN		SYSCON_UARTEN
-#define SYSCON1_BZTOG		(1 << 9)
-#define SYSCON1_BZMOD		(1 << 10)
-#define SYSCON1_DBGEN		(1 << 11)
-#define SYSCON1_LCDEN		(1 << 12)
-#define SYSCON1_CDENTX		(1 << 13)
-#define SYSCON1_CDENRX		(1 << 14)
-#define SYSCON1_SIREN		(1 << 15)
-#define SYSCON1_ADCKSEL(x)	(((x) & 3) << 16)
-#define SYSCON1_ADCKSEL_MASK	(3 << 16)
-#define SYSCON1_EXCKEN		(1 << 18)
-#define SYSCON1_WAKEDIS		(1 << 19)
-#define SYSCON1_IRTXM		(1 << 20)
-
-/* common bits: SYSFLG1 / SYSFLG2 */
-#define SYSFLG_UBUSY		(1 << 11)
-#define SYSFLG_URXFE		(1 << 22)
-#define SYSFLG_UTXFF		(1 << 23)
-
-#define SYSFLG1_MCDR		(1 << 0)
-#define SYSFLG1_DCDET		(1 << 1)
-#define SYSFLG1_WUDR		(1 << 2)
-#define SYSFLG1_WUON		(1 << 3)
-#define SYSFLG1_CTS		(1 << 8)
-#define SYSFLG1_DSR		(1 << 9)
-#define SYSFLG1_DCD		(1 << 10)
-#define SYSFLG1_UBUSY		SYSFLG_UBUSY
-#define SYSFLG1_NBFLG		(1 << 12)
-#define SYSFLG1_RSTFLG		(1 << 13)
-#define SYSFLG1_PFFLG		(1 << 14)
-#define SYSFLG1_CLDFLG		(1 << 15)
-#define SYSFLG1_URXFE		SYSFLG_URXFE
-#define SYSFLG1_UTXFF		SYSFLG_UTXFF
-#define SYSFLG1_CRXFE		(1 << 24)
-#define SYSFLG1_CTXFF		(1 << 25)
-#define SYSFLG1_SSIBUSY		(1 << 26)
-#define SYSFLG1_ID		(1 << 29)
-
-#define SYSFLG2_SSRXOF		(1 << 0)
-#define SYSFLG2_RESVAL		(1 << 1)
-#define SYSFLG2_RESFRM		(1 << 2)
-#define SYSFLG2_SS2RXFE		(1 << 3)
-#define SYSFLG2_SS2TXFF		(1 << 4)
-#define SYSFLG2_SS2TXUF		(1 << 5)
-#define SYSFLG2_CKMODE		(1 << 6)
-#define SYSFLG2_UBUSY		SYSFLG_UBUSY
-#define SYSFLG2_URXFE		SYSFLG_URXFE
-#define SYSFLG2_UTXFF		SYSFLG_UTXFF
-
-#define LCDCON_GSEN		(1 << 30)
-#define LCDCON_GSMD		(1 << 31)
-
-#define SYSCON2_SERSEL		(1 << 0)
-#define SYSCON2_KBD6		(1 << 1)
-#define SYSCON2_DRAMZ		(1 << 2)
-#define SYSCON2_KBWEN		(1 << 3)
-#define SYSCON2_SS2TXEN		(1 << 4)
-#define SYSCON2_PCCARD1		(1 << 5)
-#define SYSCON2_PCCARD2		(1 << 6)
-#define SYSCON2_SS2RXEN		(1 << 7)
-#define SYSCON2_UART2EN		SYSCON_UARTEN
-#define SYSCON2_SS2MAEN		(1 << 9)
-#define SYSCON2_OSTB		(1 << 12)
-#define SYSCON2_CLKENSL		(1 << 13)
-#define SYSCON2_BUZFREQ		(1 << 14)
-
-/* common bits: UARTDR1 / UARTDR2 */
-#define UARTDR_FRMERR		(1 << 8)
-#define UARTDR_PARERR		(1 << 9)
-#define UARTDR_OVERR		(1 << 10)
-
-/* common bits: UBRLCR1 / UBRLCR2 */
-#define UBRLCR_BAUD_MASK	((1 << 12) - 1)
-#define UBRLCR_BREAK		(1 << 12)
-#define UBRLCR_PRTEN		(1 << 13)
-#define UBRLCR_EVENPRT		(1 << 14)
-#define UBRLCR_XSTOP		(1 << 15)
-#define UBRLCR_FIFOEN		(1 << 16)
-#define UBRLCR_WRDLEN5		(0 << 17)
-#define UBRLCR_WRDLEN6		(1 << 17)
-#define UBRLCR_WRDLEN7		(2 << 17)
-#define UBRLCR_WRDLEN8		(3 << 17)
-#define UBRLCR_WRDLEN_MASK	(3 << 17)
-
-#define SYNCIO_SMCKEN		(1 << 13)
-#define SYNCIO_TXFRMEN		(1 << 14)
-
-#define SYSCON3 0x2200  /* System Control register 3 ----------------------- */
-#define ADCCON  0x00000001  /* ADC configuration */
-#define CLKCTL  0x00000006  /* processor clock control */
-#define CLKCTL_18      0x0  /* 18.432 MHz */
-#define CLKCTL_36      0x2  /* 36.864 MHz */
-#define CLKCTL_49      0x4  /* 49.152 MHz */
-#define CLKCTL_73      0x6  /* 73.728 MHz */
-#define MCPSEL  0x00000008  /* MCP select */
-#define ADCCKNSEN 0x000010  /* ADC clock sense */
-#define VERSN   0x000000e0  /* additional version bits */
-#define VERSN_SHIFT     5
-#define FASTWAKE 0x0000100  /* Wakeup clock select: 0=8Hz, 1=4kHz */
-
-#define INTSR3  0x2240  /* Interrupt Status register 3 --------------------- */
-#define MCPINT  0x00000001  /* MCP interface interrupt (FIQ) */
-
-#define INTMR3  0x2280  /* Interrupt Mask register 3 ----------------------- */
-#define LEDFLSH 0x22C0  /* LED Flash control register ---------------------- */
-#define LEDFLSH_RATE       0x03  /* flash rate */
-#define LEDFLSH_RATE_SHIFT 0
-#define LEDFLSH_DUTY       0x3c  /* duty ratio */
-#define LEDFLSH_DUTY_SHIFT 2
-#define LEDFLSH_ENABLE     0x40  /* enable */
-
-#define IO_START	CLPS7111_PHYS_BASE
-
-#define IO(offset)	(IO_START + (offset))
-
-#define IO_BYTE(offset)	(*(volatile unsigned char *)(IO_START + (offset)))
-#define IO_WORD(offset)	(*(volatile unsigned long *)(IO_START + (offset)))
-
-#define IO_PADR		IO_BYTE(PADR)
-#define IO_PBDR		IO_BYTE(PBDR)
-#define IO_PDDR		IO_BYTE(PDDR)
-#define IO_PADDR	IO_BYTE(PADDR)
-#define IO_PBDDR	IO_BYTE(PBDDR)
-#define IO_PDDDR	IO_BYTE(PDDDR)
-#define IO_PEDR		IO_BYTE(PEDR)
-#define IO_PEDDR	IO_BYTE(PEDDR)
-#define IO_SYSCON	IO_WORD(SYSCON)
-#define	IO_SYSFLG	IO_WORD(SYSFLG)
-#define	IO_MEMCFG1	IO_WORD(MEMCFG1)
-#define	IO_MEMCFG2	IO_WORD(MEMCFG2)
-#define IO_DRFPR	IO_WORD(DRFPR)
-#define IO_INTSR	IO_WORD(INTSR)
-#define IO_INTMR	IO_WORD(INTMR)
-#define	IO_LCDCON	IO_WORD(LCDCON)
-#define IO_TC1D		IO_WORD(TC1D)
-#define IO_TC2D		IO_WORD(TC2D)
-#define IO_RTCDR	IO_WORD(RTCDR)
-#define IO_RTCMR	IO_WORD(RTCMR)
-#define IO_PMPCON	IO_WORD(PMPCON)
-#define IO_CODR		IO_BYTE(CODR)
-#define IO_UARTDR	IO_WORD(UARTDR)
-#define IO_UBRLCR	IO_WORD(UBRLCR)
-#define IO_SYNCIO	IO_WORD(SYNCIO)
-#define	IO_PALLSW	IO_WORD(PALLSW)
-#define	IO_PALMSW	IO_WORD(PALMSW)
-#define IO_STFCLR	IO_WORD(STFCLR)
-#define IO_BLEOI	IO_WORD(BLEOI)
-#define IO_MCEOI	IO_WORD(MCEOI)
-#define IO_TEOI		IO_WORD(TEOI)
-#define IO_TC1EOI	IO_WORD(TC1EOI)
-#define IO_TC2EOI	IO_WORD(TC2EOI)
-#define IO_RTCEOI	IO_WORD(RTCEOI)
-#define IO_UMSEOI	IO_WORD(UMSEOI)
-#define IO_COEOI	IO_WORD(COEOI)
-#define IO_HALT		IO_WORD(HALT)
-#define IO_STDBY	IO_WORD(STDBY)
-#define IO_SYSCON1	IO_WORD(SYSCON1)
-#define IO_SYSFLG1	IO_WORD(SYSFLG1)
-#define IO_INTSR1	IO_WORD(INTSR1)
-#define IO_INTMR1	IO_WORD(INTMR1)
-#define IO_UARTDR1	IO_WORD(UARTDR1)
-#define IO_UBRLCR1	IO_WORD(UBRLCR1)
-#define IO_FRBADDR	IO_WORD(FRBADDR)
-#define IO_SYSCON2	IO_WORD(SYSCON2)
-#define IO_SYSFLG2	IO_WORD(SYSFLG2)
-#define IO_INTSR2	IO_WORD(INTSR2)
-#define IO_INTMR2	IO_WORD(INTMR2)
-#define IO_UARTDR2	IO_WORD(UARTDR2)
-#define IO_UBRLCR2	IO_WORD(UBRLCR2)
-#define IO_KBDEOI	IO_WORD(KBDEOI)
-
-#define IO_MCCR		IO_WORD(MCCR)
-#define IO_MCDR0	IO_WORD(MCDR0)
-#define IO_MCDR1	IO_WORD(MCDR1)
-#define IO_MCDR2	IO_WORD(MCDR2)
-#define IO_MCSR		IO_WORD(MCSR)
-#define IO_SYSCON3	IO_WORD(SYSCON3)
-#define IO_INTSR3	IO_WORD(INTSR3)
-#define IO_INTMR3	IO_WORD(INTMR3)
-#define IO_LEDFLSH	IO_WORD(LEDFLSH)
-
-#endif /* __ASM_HARDWARE_CLPS7111_H */
diff --git a/include/command.h b/include/command.h
index 1f06aa1..10bc260 100644
--- a/include/command.h
+++ b/include/command.h
@@ -28,6 +28,7 @@
 #define __COMMAND_H
 
 #include <config.h>
+#include <linker_lists.h>
 
 #ifndef NULL
 #define NULL	0
@@ -61,8 +62,6 @@
 
 typedef struct cmd_tbl_s	cmd_tbl_t;
 
-extern cmd_tbl_t  __u_boot_cmd_start;
-extern cmd_tbl_t  __u_boot_cmd_end;
 
 #if defined(CONFIG_CMD_RUN)
 extern int do_run(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]);
@@ -153,9 +152,6 @@
 #define CMD_FLAG_REPEAT		0x0001	/* repeat last command		*/
 #define CMD_FLAG_BOOTD		0x0002	/* command is from bootd	*/
 
-#define Struct_Section  __attribute__((unused, section(".u_boot_cmd"), \
-		aligned(4)))
-
 #ifdef CONFIG_AUTO_COMPLETE
 # define _CMD_COMPLETE(x) x,
 #else
@@ -167,18 +163,22 @@
 # define _CMD_HELP(x)
 #endif
 
-#define U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,comp) \
-	{#name, maxargs, rep, cmd, usage, _CMD_HELP(help) _CMD_COMPLETE(comp)}
+#define U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd,		\
+				_usage, _help, _comp)			\
+		{ #_name, _maxargs, _rep, _cmd, _usage,			\
+			_CMD_HELP(_help) _CMD_COMPLETE(_comp) }
 
-#define U_BOOT_CMD_MKENT(name,maxargs,rep,cmd,usage,help) \
-	U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,NULL)
+#define U_BOOT_CMD_MKENT(_name, _maxargs, _rep, _cmd, _usage, _help)	\
+	U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd,		\
+					_usage, _help, NULL)
 
-#define U_BOOT_CMD_COMPLETE(name,maxargs,rep,cmd,usage,help,comp) \
-	cmd_tbl_t __u_boot_cmd_##name Struct_Section = \
-		U_BOOT_CMD_MKENT_COMPLETE(name,maxargs,rep,cmd,usage,help,comp)
+#define U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, _comp) \
+	ll_entry_declare(cmd_tbl_t, _name, cmd, cmd) =			\
+		U_BOOT_CMD_MKENT_COMPLETE(_name, _maxargs, _rep, _cmd,	\
+						_usage, _help, _comp);
 
-#define U_BOOT_CMD(name,maxargs,rep,cmd,usage,help) \
-	U_BOOT_CMD_COMPLETE(name,maxargs,rep,cmd,usage,help,NULL)
+#define U_BOOT_CMD(_name, _maxargs, _rep, _cmd, _usage, _help)		\
+	U_BOOT_CMD_COMPLETE(_name, _maxargs, _rep, _cmd, _usage, _help, NULL)
 
 #if defined(CONFIG_NEEDS_MANUAL_RELOC)
 void fixup_cmdtable(cmd_tbl_t *cmdtp, int size);
diff --git a/include/common.h b/include/common.h
index b23e90b..5e3c5ee 100644
--- a/include/common.h
+++ b/include/common.h
@@ -341,13 +341,9 @@
 int	getenv_f     (const char *name, char *buf, unsigned len);
 ulong getenv_ulong(const char *name, int base, ulong default_val);
 int	saveenv	     (void);
-#ifdef CONFIG_PPC		/* ARM version to be fixed! */
-int inline setenv    (const char *, const char *);
-#else
 int	setenv	     (const char *, const char *);
 int setenv_ulong(const char *varname, ulong value);
 int setenv_addr(const char *varname, const void *addr);
-#endif /* CONFIG_PPC */
 #ifdef CONFIG_ARM
 # include <asm/mach-types.h>
 # include <asm/setup.h>
diff --git a/include/commproc.h b/include/commproc.h
index 8b8cc45..7ca28c8 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -466,39 +466,6 @@
 
 #endif	/* MPC860ADS */
 
-/***  AMX860  **********************************************/
-
-#if defined(CONFIG_AMX860)
-
-/* This ENET stuff is for the AMX860 with ethernet on SCC1.
- */
-
-#define PROFF_ENET	PROFF_SCC1
-#define CPM_CR_ENET	CPM_CR_CH_SCC1
-#define SCC_ENET	0
-
-#define PA_ENET_RXD	((ushort)0x0001)
-#define PA_ENET_TXD	((ushort)0x0002)
-#define PA_ENET_TCLK	((ushort)0x0400)
-#define PA_ENET_RCLK	((ushort)0x0800)
-
-#define PB_ENET_TENA	((uint)0x00001000)
-
-#define PC_ENET_CLSN	((ushort)0x0010)
-#define PC_ENET_RENA	((ushort)0x0020)
-
-#define SICR_ENET_MASK	((uint)0x000000ff)
-#define SICR_ENET_CLKRT	((uint)0x0000003e)
-
-/* 68160 PHY control */
-
-#define PB_ENET_ETHLOOP	((uint)0x00020000)
-#define PB_ENET_TPFLDL	((uint)0x00010000)
-#define PB_ENET_TPSQEL	((uint)0x00008000)
-#define PD_ENET_ETH_EN	((ushort)0x0004)
-
-#endif	/* CONFIG_AMX860 */
-
 /***  BSEIP  **********************************************************/
 
 #ifdef CONFIG_BSEIP
@@ -547,38 +514,6 @@
 #define SICR_ENET_CLKRT	((uint)0x00003400)
 #endif	/* CONFIG_FLAGADM */
 
-/***  C2MON  **********************************************************/
-
-#ifdef CONFIG_C2MON
-
-# ifndef CONFIG_FEC_ENET	/* use SCC for 10Mbps Ethernet	*/
-#  error "Ethernet on SCC not supported on C2MON Board!"
-# else				/* Use FEC for Fast Ethernet */
-
-#undef	SCC_ENET
-#define FEC_ENET
-
-#define PD_MII_TXD1	((ushort)0x1000)	/* PD  3 */
-#define PD_MII_TXD2	((ushort)0x0800)	/* PD  4 */
-#define PD_MII_TXD3	((ushort)0x0400)	/* PD  5 */
-#define PD_MII_RX_DV	((ushort)0x0200)	/* PD  6 */
-#define PD_MII_RX_ERR	((ushort)0x0100)	/* PD  7 */
-#define PD_MII_RX_CLK	((ushort)0x0080)	/* PD  8 */
-#define PD_MII_TXD0	((ushort)0x0040)	/* PD  9 */
-#define PD_MII_RXD0	((ushort)0x0020)	/* PD 10 */
-#define PD_MII_TX_ERR	((ushort)0x0010)	/* PD 11 */
-#define PD_MII_MDC	((ushort)0x0008)	/* PD 12 */
-#define PD_MII_RXD1	((ushort)0x0004)	/* PD 13 */
-#define PD_MII_RXD2	((ushort)0x0002)	/* PD 14 */
-#define PD_MII_RXD3	((ushort)0x0001)	/* PD 15 */
-
-#define PD_MII_MASK	((ushort)0x1FFF)	/* PD 3...15 */
-
-# endif	/* CONFIG_FEC_ENET */
-#endif	/* CONFIG_C2MON */
-
-/*********************************************************************/
-
 /***  ELPT860 *********************************************************/
 
 #ifdef CONFIG_ELPT860
@@ -828,33 +763,6 @@
 
 #endif	/* CONFIG_HERMES */
 
-/***  IAD210  **********************************************************/
-
-/* The IAD210 uses the FEC on a MPC860P for Ethernet */
-
-#if defined(CONFIG_IAD210)
-
-# define  FEC_ENET    /* use FEC for Ethernet */
-# undef   SCC_ENET
-
-# define PD_MII_TXD1    ((ushort) 0x1000 )	/* PD  3 */
-# define PD_MII_TXD2    ((ushort) 0x0800 )	/* PD  4 */
-# define PD_MII_TXD3    ((ushort) 0x0400 )	/* PD  5 */
-# define PD_MII_RX_DV   ((ushort) 0x0200 )	/* PD  6 */
-# define PD_MII_RX_ERR  ((ushort) 0x0100 )	/* PD  7 */
-# define PD_MII_RX_CLK  ((ushort) 0x0080 )	/* PD  8 */
-# define PD_MII_TXD0    ((ushort) 0x0040 )	/* PD  9 */
-# define PD_MII_RXD0    ((ushort) 0x0020 )	/* PD 10 */
-# define PD_MII_TX_ERR  ((ushort) 0x0010 )	/* PD 11 */
-# define PD_MII_MDC     ((ushort) 0x0008 )	/* PD 12 */
-# define PD_MII_RXD1    ((ushort) 0x0004 )	/* PD 13 */
-# define PD_MII_RXD2    ((ushort) 0x0002 )	/* PD 14 */
-# define PD_MII_RXD3    ((ushort) 0x0001 )	/* PD 15 */
-
-# define PD_MII_MASK    ((ushort) 0x1FFF )   /* PD 3...15 */
-
-#endif	/* CONFIG_IAD210 */
-
 /*** ICU862  **********************************************************/
 
 #if defined(CONFIG_ICU862)
@@ -954,34 +862,6 @@
 
 #endif	/* CONFIG_KUP4K */
 
-
-/***  LANTEC  *********************************************************/
-
-#if defined(CONFIG_LANTEC) && CONFIG_LANTEC >= 2
-/* Bits in parallel I/O port registers that have to be set/cleared
- * to configure the pins for SCC2 use.
- */
-#define	PROFF_ENET	PROFF_SCC2
-#define	CPM_CR_ENET	CPM_CR_CH_SCC2
-#define	SCC_ENET	1
-#define PA_ENET_RXD	((ushort)0x0004)	/* PA 13 */
-#define PA_ENET_TXD	((ushort)0x0008)	/* PA 12 */
-#define PA_ENET_RCLK	((ushort)0x0200)	/* PA  6 */
-#define PA_ENET_TCLK	((ushort)0x0400)	/* PA  5 */
-
-#define PB_ENET_TENA	((uint)0x00002000)	/* PB 18 */
-
-#define PC_ENET_LBK	((ushort)0x0010)	/* PC 11 */
-#define PC_ENET_CLSN	((ushort)0x0040)	/* PC  9 */
-#define PC_ENET_RENA	((ushort)0x0080)	/* PC  8 */
-
-/* Control bits in the SICR to route TCLK (CLK3) and RCLK (CLK2) to
- * SCC2.  Also, make sure GR2 (bit 16) and SC2 (bit 17) are zero.
- */
-#define SICR_ENET_MASK	((uint)0x0000FF00)
-#define SICR_ENET_CLKRT	((uint)0x00002E00)
-#endif	/* CONFIG_LANTEC v2 */
-
 /***  LWMON  **********************************************************/
 
 #if defined(CONFIG_LWMON)
@@ -1373,15 +1253,14 @@
 
 #endif	/* CONFIG_SXNI855T */
 
-/***  MVS1, TQM823L/M, TQM850L/M, TQM885D, ETX094, R360MPI  **********/
+/***  MVS1, TQM823L/M, TQM850L/M, TQM885D, R360MPI  **********/
 
 #if (defined(CONFIG_MVS) && CONFIG_MVS < 2) || \
     defined(CONFIG_R360MPI) || defined(CONFIG_RBC823)  || \
-    defined(CONFIG_TQM823L) || defined(CONFIG_TQM823M) || \
-    defined(CONFIG_TQM850L) || defined(CONFIG_TQM850M) || \
-    defined(CONFIG_TQM885D) || defined(CONFIG_ETX094)  || \
-    defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)|| \
-   (defined(CONFIG_LANTEC) && CONFIG_LANTEC < 2)
+    defined(CONFIG_RRVISION)|| defined(CONFIG_TQM823L) || \
+    defined(CONFIG_TQM823M) || defined(CONFIG_TQM850L) || \
+    defined(CONFIG_TQM850M) || defined(CONFIG_TQM885D) || \
+    defined(CONFIG_RRVISION)|| defined(CONFIG_VIRTLAB2)
 
 /* Bits in parallel I/O port registers that have to be set/cleared
  * to configure the pins for SCC2 use.
diff --git a/include/config_fallbacks.h b/include/config_fallbacks.h
index 430890c..bfb9680 100644
--- a/include/config_fallbacks.h
+++ b/include/config_fallbacks.h
@@ -13,4 +13,17 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
 #endif
 
+#if defined(CONFIG_CMD_FAT) && !defined(CONFIG_FS_FAT)
+#define CONFIG_FS_FAT
+#endif
+
+#if (defined(CONFIG_CMD_EXT4) || defined(CONFIG_CMD_EXT2)) && \
+						!defined(CONFIG_FS_EXT4)
+#define CONFIG_FS_EXT4
+#endif
+
+#if defined(CONFIG_CMD_EXT4_WRITE) && !defined(CONFIG_EXT4_WRITE)
+#define CONFIG_EXT4_WRITE
+#endif
+
 #endif	/* __CONFIG_FALLBACKS_H */
diff --git a/include/config_phylib_all_drivers.h b/include/config_phylib_all_drivers.h
index 1db7cec..12828c6 100644
--- a/include/config_phylib_all_drivers.h
+++ b/include/config_phylib_all_drivers.h
@@ -23,6 +23,7 @@
 #define CONFIG_PHY_NATSEMI
 #define CONFIG_PHY_LXT
 #define CONFIG_PHY_ATHEROS
+#define CONFIG_PHY_SMSC
 
 #ifdef CONFIG_PHYLIB_10G
 #define CONFIG_PHY_TERANETICS
diff --git a/include/configs/AMX860.h b/include/configs/AMX860.h
deleted file mode 100644
index e7a6c80..0000000
--- a/include/configs/AMX860.h
+++ /dev/null
@@ -1,299 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC860		1
-#define CONFIG_AMX860		1
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#undef	CONFIG_8xx_CONS_SMC1		/* Console is on SCC2		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#define	CONFIG_8xx_CONS_SCC2	1
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-
-#define MPC8XX_FACT		10		/* Multiply by 10	*/
-#define MPC8XX_XIN		5000000			/* 5 MHz in	*/
-#define MPC8XX_HZ ((MPC8XX_XIN) * (MPC8XX_FACT))
-
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#define CONFIG_BOOTCOMMAND							\
-	"bootp;"								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
-	"bootm"				/* autoboot command */
-
-#undef CONFIG_BOOTARGS
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#define	CONFIG_SCC1_ENET	1	/* use SCC1 ethernet */
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-#if defined(CONFIG_CMD_KGDB)
-#undef	CONFIG_KGDB_ON_SMC		/* define if kgdb on SMC */
-#define	CONFIG_KGDB_ON_SCC		/* define if kgdb on SCC */
-#undef	CONFIG_KGDB_NONE		/* define if kgdb on something else */
-#define CONFIG_KGDB_INDEX	1	/* which serial channel for kgdb */
-#define CONFIG_KGDB_BAUDRATE	9600	/* speed to run kgdb serial port at */
-#endif
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_SUBNETMASK
-
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0200000	/* 1 ... 4 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x00100000
-
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR			0xFF000000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * U-Boot for AMX board supports two types of memory extension
- * modules: one that provides 4 MB flash memory, and another one with
- * 16 MB EDO DRAM.
- *
- * The flash module swaps the CS0 and CS1 signals: if the module is
- * installed, CS0 is connected to Flash on the module and CS1 is
- * connected to the on-board Flash. This means that you must intall
- * U-Boot when the Flash module is plugged in, if you plan to use
- * it.
- *
- * To enable support for the DRAM extension card, CONFIG_AMX_RAM_EXT
- * must be defined. The DRAM module uses CS1.
- *
- * Only one of these modules may be installed at a time. If U-Boot
- * is compiled with the CONFIG_AMX_RAM_EXT option set, it will not
- * work if the Flash extension module is installed instead of the
- * DRAM module.
- */
-#define CONFIG_AMX_RAM_EXT	/* 16Mb Ext. DRAM module support */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- *
- * Use 4 MB for without and 8 MB with 16 MB DRAM extension module
- * (CONFIG_AMX_RAM_EXT)
- */
-#ifdef CONFIG_AMX_RAM_EXT
-# define	CONFIG_SYS_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux	*/
-#else
-# define	CONFIG_SYS_BOOTMAPSZ	(4 << 20)	/* Initial Memory map for Linux	*/
-#endif
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control					11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration					11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control					11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
- */
-#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
-				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-#define CONFIG_SYS_SCCR	(SCCR_TBS|SCCR_COM00|SCCR_DFSYNC00|SCCR_DFBRG00|SCCR_DFNL000|SCCR_DFNH000|SCCR_DFLCD000|SCCR_DFALCD00)
-
-#define CONFIG_SYS_DER		0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-#ifndef CONFIG_AMX_RAM_EXT
-#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #1	*/
-#endif
-
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xFFC00000	/* OR addr mask */
-
-/* FLASH timing: ACS = 10, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 0	*/
-/*				 0x00000800	0x00000400 0x00000100 0x00000030     0x00000004 */
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV4 | OR_BI | OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-
-#define CONFIG_SYS_OR0_PRELIM	0xFFC00954	/* Real values for the board */
-#define CONFIG_SYS_BR0_PRELIM	0x40000001	/* Real values for the board */
-
-#ifndef CONFIG_AMX_RAM_EXT
-#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR1_PRELIM	0xFFC00954	/* Real values for the board */
-#define CONFIG_SYS_BR1_PRELIM	0x60000001	/* Real values for the board */
-#endif
-
-/* DSP ("Glue") Xilinx */
-#define CONFIG_SYS_OR6_PRELIM	0xFFFF8000	/* 32kB, 15 waits, cs after addr, no bursts */
-#define CONFIG_SYS_BR6_PRELIM	0x60000401	/* use GPCM for CS generation, 8 bit port */
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/BMW.h b/include/configs/BMW.h
deleted file mode 100644
index 633e9bd..0000000
--- a/include/configs/BMW.h
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- *
- * Configuration settings for the CU824 board.
- *
- */
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC824X		1
-#define CONFIG_MPC8245		1
-#define CONFIG_BMW		1
-
-#define	CONFIG_SYS_TEXT_BASE	0xFFF00000
-
-#define	CONFIG_MISC_INIT_F	1	/* Use misc_init_f()			*/
-
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		9600
-
-#define CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz	*/
-
-#define CONFIG_BOOTCOMMAND	"bootm FF820000"	/* autoboot command	*/
-#define CONFIG_BOOTDELAY	5
-
-#define CONFIG_SYS_MAX_DOC_DEVICE      1 /* Only use Onboard TSOP-16MB device */
-#define DOC_PASSIVE_PROBE       1
-#define CONFIG_SYS_DOC_SUPPORT_2000    1
-#define CONFIG_SYS_DOC_SUPPORT_MILLENNIUM 1
-#define CONFIG_SYS_DOC_SHORT_TIMEOUT    1
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_ELF
-#undef CONFIG_CMD_NET
-#undef CONFIG_CMD_NFS
-
-
-#if 0
-#define CONFIG_PCI		1
-#define CONFIG_PCI_PNP		1	/* PCI plug-and-play */
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"=>"	        /* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-
-/* Print Buffer Size
- */
-#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-
-#define CONFIG_SYS_MAXARGS	8		/* Max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR	0x00100000	/* Default load address		*/
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define CONFIG_SYS_SDRAM_BASE	    0x00000000
-
-#define CONFIG_SYS_FLASH_BASE0_PRELIM      0xFFF00000      /* FLASH bank on RCS#0 */
-#define CONFIG_SYS_FLASH_BASE1_PRELIM      0xFF800000      /* FLASH bank on RCS#1 */
-#define CONFIG_SYS_FLASH_BASE  CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_FLASH_BANKS		{ CONFIG_SYS_FLASH_BASE0_PRELIM , CONFIG_SYS_FLASH_BASE1_PRELIM }
-
-/* even though FLASHP_BASE is FF800000, with 4MB is RCS0, the
- * reset vector is actually located at FFB00100, but the 8245
- * takes care of us.
- */
-#define CONFIG_SYS_RESET_ADDRESS   0xFFF00100
-
-#define CONFIG_SYS_EUMB_ADDR	    0xFC000000
-
-#define CONFIG_SYS_MONITOR_BASE    CONFIG_SYS_TEXT_BASE
-
-#define CONFIG_SYS_MONITOR_LEN	    (256 << 10) /* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MALLOC_LEN	    (2048 << 10) /* Reserve 2MB for malloc()	*/
-
-#define CONFIG_SYS_MEMTEST_START   0x00004000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END	    0x04000000	/* 0 ... 32 MB in DRAM		*/
-
-	/* Maximum amount of RAM.
-	 */
-#define CONFIG_SYS_MAX_RAM_SIZE    0x04000000	/* 0 .. 64 MB of (S)DRAM */
-
-
-#if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE
-#undef CONFIG_SYS_RAMBOOT
-#else
-#define CONFIG_SYS_RAMBOOT
-#endif
-
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area
- */
-#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_MONITOR_LEN
-#define CONFIG_SYS_INIT_RAM_SIZE   0x2F00  /* Size of used area in DPRAM  */
-#define CONFIG_SYS_GBL_DATA_OFFSET  (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET  CONFIG_SYS_GBL_DATA_OFFSET
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- * For the detail description refer to the MPC8240 user's manual.
- */
-
-#define CONFIG_SYS_CLK_FREQ  33000000	/* external frequency to pll */
-#define CONFIG_SYS_HZ		     1000
-
-#define CONFIG_SYS_ETH_DEV_FN	     0x7800
-#define CONFIG_SYS_ETH_IOBASE	     0x00104000
-
-	/* Bit-field values for MCCR1.
-	 */
-#define CONFIG_SYS_ROMNAL	    0xf
-#define CONFIG_SYS_ROMFAL	    0x1f
-#define CONFIG_SYS_DBUS_SIZE       0x3
-
-	/* Bit-field values for MCCR2.
-	 */
-#define CONFIG_SYS_TSWAIT	    0x5		    /* Transaction Start Wait States timer */
-#define CONFIG_SYS_REFINT	    0x400	    /* Refresh interval	FIXME: was 0t430		*/
-
-	/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4.
-	 */
-#define CONFIG_SYS_BSTOPRE	    0		/* FIXME: was 192 */
-
-	/* Bit-field values for MCCR3.
-	 */
-#define CONFIG_SYS_REFREC	    2	    /* Refresh to activate interval */
-
-	/* Bit-field values for MCCR4.
-	 */
-#define CONFIG_SYS_PRETOACT	    2	    /* Precharge to activate interval FIXME: was 2	*/
-#define CONFIG_SYS_ACTTOPRE	    5	    /* Activate to Precharge interval FIXME: was 5	*/
-#define CONFIG_SYS_SDMODE_CAS_LAT  3	    /* SDMODE CAS latancy */
-#define CONFIG_SYS_SDMODE_WRAP	    0	    /* SDMODE wrap type	*/
-#define CONFIG_SYS_SDMODE_BURSTLEN 3	    /* SDMODE Burst length */
-#define CONFIG_SYS_ACTORW	    0xa		/* FIXME was 2 */
-#define CONFIG_SYS_REGISTERD_TYPE_BUFFER 1
-
-#define CONFIG_SYS_PGMAX           0x0 /* how long the 8240 reatins the currently accessed page in memory FIXME: was 0x32*/
-
-#define CONFIG_SYS_SDRAM_DSCD	0x20	/* SDRAM data in sample clock delay - note bottom 3 bits MUST be 0 */
-
-/* Memory bank settings.
- * Only bits 20-29 are actually used from these vales to set the
- * start/end addresses. The upper two bits will always be 0, and the lower
- * 20 bits will be 0x00000 for a start address, or 0xfffff for an end
- * address. Refer to the MPC8240 book.
- */
-
-#define CONFIG_SYS_BANK0_START	    0x00000000
-#define CONFIG_SYS_BANK0_END	    (CONFIG_SYS_MAX_RAM_SIZE - 1)
-#define CONFIG_SYS_BANK0_ENABLE    1
-#define CONFIG_SYS_BANK1_START	    0x3ff00000
-#define CONFIG_SYS_BANK1_END	    0x3fffffff
-#define CONFIG_SYS_BANK1_ENABLE    0
-#define CONFIG_SYS_BANK2_START	    0x3ff00000
-#define CONFIG_SYS_BANK2_END	    0x3fffffff
-#define CONFIG_SYS_BANK2_ENABLE    0
-#define CONFIG_SYS_BANK3_START	    0x3ff00000
-#define CONFIG_SYS_BANK3_END	    0x3fffffff
-#define CONFIG_SYS_BANK3_ENABLE    0
-#define CONFIG_SYS_BANK4_START	    0x3ff00000
-#define CONFIG_SYS_BANK4_END	    0x3fffffff
-#define CONFIG_SYS_BANK4_ENABLE    0
-#define CONFIG_SYS_BANK5_START	    0x3ff00000
-#define CONFIG_SYS_BANK5_END	    0x3fffffff
-#define CONFIG_SYS_BANK5_ENABLE    0
-#define CONFIG_SYS_BANK6_START	    0x3ff00000
-#define CONFIG_SYS_BANK6_END	    0x3fffffff
-#define CONFIG_SYS_BANK6_ENABLE    0
-#define CONFIG_SYS_BANK7_START	    0x3ff00000
-#define CONFIG_SYS_BANK7_END	    0x3fffffff
-#define CONFIG_SYS_BANK7_ENABLE    0
-
-#define CONFIG_SYS_ODCR	    0xff
-
-#define CONFIG_PCI              1 /* Include PCI support */
-#undef CONFIG_PCI_PNP
-
-/* PCI Memory space(s) */
-#define PCI_MEM_SPACE1_START	0x80000000
-#define PCI_MEM_SPACE2_START	0xfd000000
-
-/* ROM Spaces */
-#include "../board/bmw/bmw.h"
-
-/* BAT configuration */
-#define CONFIG_SYS_IBAT0L  (CONFIG_SYS_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
-#define CONFIG_SYS_IBAT0U  (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT1L  (0x70000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT1U  (0x70000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT2L  (0x80000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT2U  (0x80000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_IBAT3L  (0xF0000000 | BATL_PP_10 | BATL_CACHEINHIBIT)
-#define CONFIG_SYS_IBAT3U  (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP)
-
-#define CONFIG_SYS_DBAT0L  CONFIG_SYS_IBAT0L
-#define CONFIG_SYS_DBAT0U  CONFIG_SYS_IBAT0U
-#define CONFIG_SYS_DBAT1L  CONFIG_SYS_IBAT1L
-#define CONFIG_SYS_DBAT1U  CONFIG_SYS_IBAT1U
-#define CONFIG_SYS_DBAT2L  CONFIG_SYS_IBAT2L
-#define CONFIG_SYS_DBAT2U  CONFIG_SYS_IBAT2U
-#define CONFIG_SYS_DBAT3L  CONFIG_SYS_IBAT3L
-#define CONFIG_SYS_DBAT3U  CONFIG_SYS_IBAT3U
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ	    (8 << 20)	/* Initial Memory map for Linux */
-
-/*
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	0	/* Max number of flash banks	    */
-#define CONFIG_SYS_MAX_FLASH_SECT	64	/* Max number of sectors per  flash */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms) */
-
-/*
- * Warining: environment is not EMBEDDED in the U-Boot code.
- * It's stored in flash separately.
- */
-#define CONFIG_ENV_IS_IN_NVRAM      1
-#define CONFIG_ENV_OVERWRITE     1
-#define CONFIG_SYS_NVRAM_ACCESS_ROUTINE 1
-#define CONFIG_ENV_ADDR		0x7c004000 /* right at the start of NVRAM  */
-#define CONFIG_ENV_SIZE		0x1ff0	/* Size of the Environment - 8K	   */
-#define CONFIG_ENV_OFFSET		0	/* starting right at the beginning */
-
-/*
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	32
-#if defined(CONFIG_CMD_KGDB)
-#  define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value   */
-#endif
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/CPC45.h b/include/configs/CPC45.h
index fc226f1..e102c36 100644
--- a/include/configs/CPC45.h
+++ b/include/configs/CPC45.h
@@ -480,6 +480,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/ETX094.h b/include/configs/ETX094.h
deleted file mode 100644
index 2703625..0000000
--- a/include/configs/ETX094.h
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC850		1	/* This is a MPC850 CPU		*/
-#define CONFIG_ETX094		1	/* ...on a ETX_094 board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#define	CONFIG_8xx_CONS_SMC1    1       /* Console is on SMC1           */
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		57600
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-
-#define CONFIG_BOARD_TYPES	1	/* support board types		*/
-
-#define	CONFIG_FLASH_16BIT		/* for board with 16bit wide flash	*/
-#undef	SB_ETX094			/* only for SB-Board with 16MB SDRAM	*/
-#define	CONFIG_BOOTP_RANDOM_DELAY	/* graceful BOOTP recovery mode		*/
-
-#define CONFIG_ETHADDR 08:00:06:00:00:00
-
-#ifdef	CONFIG_ETHADDR
-#define CONFIG_OVERWRITE_ETHADDR_ONCE 1	/* default MAC can be overwritten once	*/
-#endif
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_RAMBOOTCOMMAND							\
-	"bootp; "								\
-	"setenv bootargs root=/dev/ram rw ramdisk_size=4690 "			\
-	"U-Boot_version=U-Boot-1.0.x-Date "					\
-	"panic=1 "								\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"bootm"
-#define CONFIG_NFSBOOTCOMMAND							\
-	"bootp; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${nfsip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"bootm"
-#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#define	CONFIG_WATCHDOG		1	/* watchdog enabled		*/
-
-#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0300000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0700000	/* 3 ... 7 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#ifdef	DEBUG
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	1000	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#ifdef CONFIG_FLASH_16BIT
-#define CONFIG_ENV_OFFSET		0x8000	/* Offset   of Environment Sector	*/
-#define	CONFIG_ENV_SIZE		0x8000	/* Total Size of Environment Sector	*/
-#else
-#define CONFIG_ENV_OFFSET		0x8000	/* Offset   of Environment Sector	*/
-#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif	/* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit - leave PLL multiplication factor unchanged !
- */
-#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 1, CSNT = 0, SCY = 2, EHTR = 0	*/
-#define CONFIG_SYS_OR_TIMING_FLASH    (OR_ACS_DIV2 | OR_BI | \
-			       OR_SCY_2_CLK | OR_TRLX )
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-
-#ifdef CONFIG_FLASH_16BIT	/* 16 bit data port */
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
-#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_16)
-#else				/* 32 bit data port */
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
-#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V | BR_PS_32)
-#endif	/* CONFIG_FLASH_16BIT */
-
-#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
-#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
-
-#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
-#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	23		/* start with divider for 100 MHz	*/
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_1X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_1X)
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/IAD210.h b/include/configs/IAD210.h
deleted file mode 100644
index 94b05dc..0000000
--- a/include/configs/IAD210.h
+++ /dev/null
@@ -1,381 +0,0 @@
-/*
- * (C) Copyright 2001, 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#include <mpc8xx_irq.h>
-
-
-# ifdef DEBUG
-#  warning DEBUG Defined
-# endif /* DEBUG */
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_MPC860		1
-#define CONFIG_IAD210		1	/* ...on a IAD210  module	*/
-#define CONFIG_MPC860T		1
-#define CONFIG_MPC862		1
-
-#define	CONFIG_SYS_TEXT_BASE	0x08000000
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-
-#undef  CONFIG_8xx_CONS_SMC1
-#undef  CONFIG_8xx_CONS_SMC2
-#define CONFIG_8xx_CONS_SCC2   /* V24 on SCC2 */
-#undef  CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		9600
-
-
-# define MPC8XX_FACT            16
-# define CONFIG_8xx_GCLK_FREQ   (64000000L)  /* define if can't use get_gclk_freq */
-# define CONFIG_CLOCKS_IN_MHZ	1            /* clocks passsed to Linux in MHz */
-
-#if 0
-# define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-# define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-/* using this define saves us updating another source file */
-#define CONFIG_BOARD_EARLY_INIT_F 1
-#define CONFIG_MISC_INIT_R
-
-#undef	CONFIG_BOOTARGS
-/* #define CONFIG_BOOTCOMMAND							\
-	"bootp;"								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off;"	\
-	"bootm"
-*/
-
-#define CONFIG_BOOTCOMMAND	\
-	"setenv bootargs root=/dev/nfs"	\
-	"ip=192.168.28.129:139.10.137.138:192.168.28.1:255.255.255.0:iadlinux002::off; "	\
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/* #define	CONFIG_STATUS_LED	1*/	/* Status LED enabled		*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-# undef  CONFIG_SCC1_ENET		/* disable SCC1 ethernet */
-# define CONFIG_FEC_ENET    1	/* use FEC ethernet  */
-# define CONFIG_MII         1
-# define CONFIG_SYS_DISCOVER_PHY   1
-# define CONFIG_FEC_UTOPIA  1
-# define CONFIG_ETHADDR     08:00:06:26:A2:6D
-# define CONFIG_IPADDR      192.168.28.128
-# define CONFIG_SERVERIP    139.10.137.138
-# define CONFIG_SYS_DISCOVER_PHY   1
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-/* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support    */
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged               */
-# define CONFIG_SYS_I2C_SPEED		50000
-# define CONFIG_SYS_I2C_SLAVE		0xDD
-# define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-/*
- * Software (bit-bang) I2C driver configuration
- */
-#define PB_SCL		0x00000020	/* PB 26 */
-#define PB_SDA		0x00000010	/* PB 27 */
-
-#define I2C_INIT	(immr->im_cpm.cp_pbdir |=  PB_SCL)
-#define I2C_ACTIVE	(immr->im_cpm.cp_pbdir |=  PB_SDA)
-#define I2C_TRISTATE	(immr->im_cpm.cp_pbdir &= ~PB_SDA)
-#define I2C_READ	((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
-#define I2C_SDA(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SDA; \
-			else    immr->im_cpm.cp_pbdat &= ~PB_SDA
-#define I2C_SCL(bit)	if(bit) immr->im_cpm.cp_pbdat |=  PB_SCL; \
-			else    immr->im_cpm.cp_pbdat &= ~PB_SCL
-#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DATE
-
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0100000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0400000	/* 1 ... 4 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x00100000
-
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFFF00000
-#define CONFIG_SYS_IMMR_SIZE		((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x08000000
-#define CONFIG_SYS_FLASH_SIZE		((uint)(4 * 1024 * 1024))	/* max 16Mbyte */
-
-#define CONFIG_SYS_RESET_ADDRESS	0xFFF00100
-
-#if defined(DEBUG)
-# define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-# define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-
-# define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-# define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500		/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OFFSET		0x8000
-#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control					11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration					11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control					11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register	15-30
- *-----------------------------------------------------------------------
- * set the PLL, the low-power modes and the reset control (15-29)
- */
-#define CONFIG_SYS_PLPRCR	(((MPC8XX_FACT-1) << PLPRCR_MF_SHIFT) |	\
-				PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-
-#define CONFIG_SYS_SCCR	(SCCR_TBS	| SCCR_COM00	| SCCR_DFSYNC00	| \
-			 SCCR_DFBRG00	| SCCR_DFNL000	| SCCR_DFNH000	| \
-			 SCCR_DFLCD000	|SCCR_DFALCD00	)
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration Register		19-4
- *-----------------------------------------------------------------------
- */
-/* +0x09C4 => DRQP = 10 (IDMA requests have lowest priority) */
-#define CONFIG_SYS_RCCR 0x0020
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- */
-#define PCMCIA_MEM_ADDR		((uint)0xff020000)
-#define PCMCIA_MEM_SIZE		((uint)(64 * 1024))
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER		0
-
-/* Because of the way the 860 starts up and assigns CS0 the
-* entire address space, we have to set the memory controller
-* differently.  Normally, you write the option register
-* first, and then enable the chip select by writing the
-* base register.  For CS0, you must write the base register
-* first, followed by the option register.
-*/
-
-/*
- * Init Memory Controller:
- *
- * BR0 and OR0 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	CONFIG_SYS_FLASH_BASE	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0xF8000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xF8000000	/* OR addr mask */
-
-/* FLASH timing:
- TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1	*/
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_BI | \
-				 OR_SCY_3_CLK | OR_EHTR)
-
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-
-#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | OR_CSNT_SAM  | OR_BI | OR_ACS_DIV4)
-#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#define CONFIG_SYS_BR1_PRELIM	((SDRAM_BASE1_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V)
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	124		/* start with divider for 64 MHz	*/
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CONFIG_SYS_MPTPR	        MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-#define CONFIG_SYS_MAMR	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_8X)
-
-#ifdef CONFIG_MPC860T
-
-/* Interrupt level assignments.
-*/
-#define FEC_INTERRUPT	SIU_LEVEL1	/* FEC interrupt */
-
-#endif /* CONFIG_MPC860T */
-
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/ICU862.h b/include/configs/ICU862.h
index 81f219c..b58b6f6 100644
--- a/include/configs/ICU862.h
+++ b/include/configs/ICU862.h
@@ -349,6 +349,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/IVML24.h b/include/configs/IVML24.h
index f98a66b..092fcf0 100644
--- a/include/configs/IVML24.h
+++ b/include/configs/IVML24.h
@@ -318,6 +318,8 @@
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET	1	/* Use postreset IDE hook */
 #define CONFIG_IDE_8xx_DIRECT	1	/* PCMCIA interface required	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
diff --git a/include/configs/IVMS8.h b/include/configs/IVMS8.h
index d6e9b23..38837ca 100644
--- a/include/configs/IVMS8.h
+++ b/include/configs/IVMS8.h
@@ -312,6 +312,8 @@
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET	1	/* Use postreset IDE hook */
 #define CONFIG_IDE_8xx_DIRECT	1	/* PCMCIA interface required	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
 
diff --git a/include/configs/KUP4K.h b/include/configs/KUP4K.h
index c0035e6..dae9b8c 100644
--- a/include/configs/KUP4K.h
+++ b/include/configs/KUP4K.h
@@ -353,6 +353,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
diff --git a/include/configs/KUP4X.h b/include/configs/KUP4X.h
index 5084ccc..cceee96 100644
--- a/include/configs/KUP4X.h
+++ b/include/configs/KUP4X.h
@@ -366,6 +366,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
deleted file mode 100644
index c3855c3..0000000
--- a/include/configs/LANTEC.h
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- * (C) Copyright 2001
- * Torsten Stevens, FHG IMS, stevens@ims.fhg.de
- * Bruno Achauer, Exet AG, bruno@exet-ag.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- * [derived from config_TQM850L.h]
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC850		1	/* This is a MPC850 CPU		*/
-#define CONFIG_LANTEC		2	/* ...on a Lantec rev.2 board	*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-/*
- *  Port assignments (CONFIG_LANTEC == 1):
- *  - SMC1: J11 (MDB) ?
- *  - SMC2: J6  (Feature connector)
- *  - SCC2: J9  (RJ45)
- *  - SCC3: J8  (Sub-D9)
- *
- *  Port assignments (CONFIG_LANTEC == 2): TBD
- */
-
-
-#undef CONFIG_8xx_CONS_SMC2           /* Console is on SMC2           */
-#define	CONFIG_8xx_CONS_SCC3
-#undef  CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE         38400   /* console baudrate = 38.4kbps  */
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"setenv bootargs root=/dev/ram panic=5;bootm 40040000 400A0000"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#define	CONFIG_STATUS_LED	1	/* Status LED enabled		*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_CDP
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_DIAG
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_IMMAP
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_PORTIO
-#define CONFIG_CMD_REGINFO
-#define CONFIG_CMD_SAVES
-#define CONFIG_CMD_SDRAM
-#define CONFIG_CMD_SNTP
-
-#undef CONFIG_CMD_XIMG
-
-#if !(CONFIG_LANTEC >= 2)
-    #undef CONFIG_CMD_DATE
-    #undef CONFIG_CMD_NET
-#endif
-
-
-#if CONFIG_LANTEC >= 2
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01 | SIUMCR_DLK)
-
-/*-----------------------------------------------------------------------
- * Clock Setting - Has the Lantec board a 32kHz clock ??? [XXX]
- *-----------------------------------------------------------------------
- */
-#define	CONFIG_8xx_GCLK_FREQ	33000000
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-			/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-			/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/5 and OR0/5 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-#define FLASH_BASE5_PRELIM	0x60000000	/* FLASH bank #1	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/* FLASH timing */
-#define CONFIG_SYS_OR_TIMING_FLASH     (OR_CSNT_SAM  | OR_BI | \
-				 OR_SCY_5_CLK | OR_TRLX)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-#define CONFIG_SYS_OR5_REMAP   CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR5_PRELIM  CONFIG_SYS_OR0_PRELIM
-#define CONFIG_SYS_BR5_PRELIM  ((FLASH_BASE5_PRELIM & BR_BA_MSK) | BR_V )
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE3_PRELIM      0x00000000      /* SDRAM bank #0        */
-#define SDRAM_MAX_SIZE          0x04000000      /* max 64 MB per bank   */
-
-/* SDRAM timing: Multiplexed addresses					*/
-#define CONFIG_SYS_OR_TIMING_SDRAM     (OR_CSNT_SAM)
-
-#define CONFIG_SYS_OR3_PRELIM  (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR3_PRELIM  ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz	*/
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL \
-			((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE      |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
-
-/*
- * JFFS2 partitions
- *
- */
-/* No command line, one static partition, whole device */
-#undef CONFIG_CMD_MTDPARTS
-#define CONFIG_JFFS2_DEV		"nor0"
-#define CONFIG_JFFS2_PART_SIZE		0xFFFFFFFF
-#define CONFIG_JFFS2_PART_OFFSET	0x00000000
-
-/* mtdparts command line support */
-/*
-#define CONFIG_CMD_MTDPARTS
-#define MTDIDS_DEFAULT		""
-#define MTDPARTS_DEFAULT	""
-*/
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/M54418TWR.h b/include/configs/M54418TWR.h
new file mode 100644
index 0000000..3be2f8e
--- /dev/null
+++ b/include/configs/M54418TWR.h
@@ -0,0 +1,448 @@
+/*
+ * Configuation settings for the Freescale MCF54418 TWR board.
+ *
+ * Copyright 2010-2012 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M54418TWR_H
+#define _M54418TWR_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF5441x	/* define processor family */
+#define CONFIG_M54418		/* define processor type */
+#define CONFIG_M54418TWR	/* M54418TWR board */
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT		(0)
+#define CONFIG_BAUDRATE		115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef CONFIG_WATCHDOG
+
+#define CONFIG_TIMESTAMP	/* Print image info with timestamp */
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_BOOTD
+#define CONFIG_CMD_CACHE
+#undef CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#undef CONFIG_CMD_FLASH
+#undef CONFIG_CMD_I2C
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_UBI
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_NAND_YAFFS
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
+#undef CONFIG_CMD_IMLS
+
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+
+/*
+ * NAND FLASH
+ */
+#ifdef CONFIG_CMD_NAND
+#define CONFIG_JFFS2_NAND
+#define CONFIG_NAND_FSL_NFC
+#define CONFIG_SYS_NAND_BASE		0xFC0FC000
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define NAND_MAX_CHIPS			CONFIG_SYS_MAX_NAND_DEVICE
+#define CONFIG_SYS_NAND_SELECT_DEVICE
+#define	CONFIG_SYS_64BIT_VSPRINTF	/* needed for nand_util.c */
+#endif
+
+/* Network configuration */
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+#define CONFIG_NET_MULTI		1
+#define CONFIG_MII			1
+#define CONFIG_MII_INIT		1
+#define CONFIG_SYS_DISCOVER_PHY
+#define CONFIG_SYS_RX_ETH_BUFFER	2
+#define CONFIG_SYS_FAULT_ECCONFIG_SYS_NO_FLASHHO_LINK_DOWN
+#define CONFIG_SYS_TX_ETH_BUFFER	2
+#define CONFIG_HAS_ETH1
+
+#define CONFIG_SYS_FEC0_PINMUX		0
+#define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
+#define CONFIG_SYS_FEC1_PINMUX		0
+#define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC0_MIIBASE
+#define MCFFEC_TOUT_LOOP		50000
+#define CONFIG_SYS_FEC0_PHYADDR	0
+#define CONFIG_SYS_FEC1_PHYADDR	1
+
+#define CONFIG_BOOTDELAY		2	/* autoboot after 5 seconds */
+
+#ifdef	CONFIG_SYS_NAND_BOOT
+#define CONFIG_BOOTARGS	"root=/dev/mtdblock2 rw rootfstype=jffs2 " \
+				"mtdparts=NAND:1M(u-boot)ro,7M(kernel)ro," \
+				"-(jffs2) console=ttyS0,115200"
+#else
+#define CONFIG_BOOTARGS	"root=/dev/nfs rw nfsroot="	\
+				__stringify(CONFIG_SERVERIP) ":/tftpboot/" \
+				__stringify(CONFIG_IPADDR) "  ip="	\
+				__stringify(CONFIG_IPADDR) ":"	\
+				__stringify(CONFIG_SERVERIP)":"	\
+				__stringify(CONFIG_GATEWAYIP)": "	\
+				__stringify(CONFIG_NETMASK)		\
+				"::eth0:off:rw console=ttyS0,115200"
+#endif
+
+#define CONFIG_ETHADDR		00:e0:0c:bc:e5:60
+#define CONFIG_ETH1ADDR	00:e0:0c:bc:e5:61
+#define CONFIG_ETHPRIME	"FEC0"
+#define CONFIG_IPADDR		192.168.1.2
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_SERVERIP	192.168.1.1
+#define CONFIG_GATEWAYIP	192.168.1.1
+
+#define CONFIG_OVERWRITE_ETHADDR_ONCE
+#define CONFIG_SYS_FEC_BUF_USE_SRAM
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#ifndef CONFIG_SYS_DISCOVER_PHY
+#define FECDUPLEX	FULL
+#define FECSPEED	_100BASET
+#define LINKSTATUS	1
+#else
+#define LINKSTATUS	0
+#ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#endif
+#endif			/* CONFIG_SYS_DISCOVER_PHY */
+#endif
+
+#define CONFIG_HOSTNAME		M54418TWR
+
+#if defined(CONFIG_CF_SBF)
+/* ST Micro serial flash */
+#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
+	"loadaddr=0x40010000\0"			\
+	"sbfhdr=sbfhdr.bin\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr} ${sbfhdr};"	\
+	"tftp " __stringify(CONFIG_SYS_LOAD_ADDR2) " ${uboot} \0"	\
+	"upd=run load; run prog\0"		\
+	"prog=sf probe 0:1 1000000 3;"		\
+	"sf erase 0 40000;"			\
+	"sf write ${loadaddr} 0 40000;"		\
+	"save\0"				\
+	""
+#elif defined(CONFIG_SYS_NAND_BOOT)
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
+	"loadaddr=0x40010000\0"			\
+	"u-boot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr} ${u-boot};\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=nand device 0;"			\
+	"nand erase 0 40000;"			\
+	"nb_update ${loadaddr} ${filesize};"	\
+	"save\0"				\
+	""
+#else
+#define CONFIG_SYS_UBOOT_END	0x3FFFF
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"inpclk=" __stringify(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
+	"loadaddr=40010000\0"			\
+	"u-boot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off mram" " ;"	\
+	"cp.b ${loadaddr} 0 ${filesize};"	\
+	"save\0"				\
+	""
+#endif
+
+/* Realtime clock */
+#undef CONFIG_MCFRTC
+#define CONFIG_RTC_MCFRRTC
+#define CONFIG_SYS_MCFRRTC_BASE		0xFC0A8000
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2c */
+#undef CONFIG_FSL_I2C
+#undef CONFIG_HARD_I2C		/* I2C with hardware support */
+#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
+/* I2C speed and slave address  */
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
+
+/* DSPI and Serial Flash */
+#define CONFIG_CF_SPI
+#define CONFIG_CF_DSPI
+#define CONFIG_SERIAL_FLASH
+#define CONFIG_HARD_SPI
+#define CONFIG_SYS_SBFHDR_SIZE		0x7
+#ifdef CONFIG_CMD_SPI
+#	define CONFIG_SPI_FLASH
+#	define CONFIG_SPI_FLASH_ATMEL
+
+#	define CONFIG_SYS_DSPI_CTAR0	(DSPI_CTAR_TRSZ(7) | \
+					 DSPI_CTAR_PCSSCK_1CLK | \
+					 DSPI_CTAR_PASC(0) | \
+					 DSPI_CTAR_PDT(0) | \
+					 DSPI_CTAR_CSSCK(0) | \
+					 DSPI_CTAR_ASC(0) | \
+					 DSPI_CTAR_DT(1))
+#	define CONFIG_SYS_DSPI_CTAR1	(CONFIG_SYS_DSPI_CTAR0)
+#	define CONFIG_SYS_DSPI_CTAR2	(CONFIG_SYS_DSPI_CTAR0)
+#endif
+
+/* Input, PCI, Flexbus, and VCO */
+#define CONFIG_EXTRA_CLOCK
+
+#define CONFIG_PRAM			2048	/* 2048 KB */
+
+/* HUSH */
+#define CONFIG_SYS_HUSH_PARSER		1
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+
+#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+
+#if defined(CONFIG_CMD_KGDB)
+#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#endif
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
+
+#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
+
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_SYS_MBAR		0xFC000000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_SIZE	0x10000
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
+/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_SIZE	256
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_SIZE - \
+					CONFIG_SYS_GBL_DATA_SIZE) - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - 32)
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		128	/* SDRAM size in MB */
+
+#define CONFIG_SYS_MEMTEST_START	(CONFIG_SYS_SDRAM_BASE + 0x400)
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
+#define CONFIG_SYS_DRAM_TEST
+
+#if defined(CONFIG_CF_SBF) || defined(CONFIG_SYS_NAND_BOOT)
+#define CONFIG_SERIAL_BOOT
+#endif
+
+#if defined(CONFIG_SERIAL_BOOT)
+#define CONFIG_SYS_MONITOR_BASE	(TEXT_BASE + 0x400)
+#else
+#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#endif
+
+#define CONFIG_SYS_BOOTPARAMS_LEN	(64 * 1024)
+/* Reserve 256 kB for Monitor */
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)
+/* Reserve 256 kB for malloc() */
+#define CONFIG_SYS_MALLOC_LEN		(256 << 10)
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+/* Initial Memory map for Linux */
+#define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \
+				(CONFIG_SYS_SDRAM_SIZE << 20))
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#if !defined(CONFIG_SERIAL_BOOT)  /*MRAM boot*/
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_MRAM	1
+#define CONFIG_ENV_ADDR		(0x40000 - 0x1000) /*MRAM size 40000*/
+#define CONFIG_ENV_SIZE		0x1000
+#endif
+
+#if defined(CONFIG_CF_SBF)
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_IN_SPI_FLASH	1
+#define CONFIG_ENV_SPI_CS		1
+#define CONFIG_ENV_OFFSET		0x40000
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE		0x10000
+#endif
+#if defined(CONFIG_SYS_NAND_BOOT)
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_ENV_OFFSET	0x80000
+#define CONFIG_ENV_SIZE	0x20000
+#define CONFIG_ENV_SECT_SIZE	0x20000
+#endif
+#undef CONFIG_ENV_OVERWRITE
+
+/* FLASH organization */
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+
+#undef CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+
+#define CONFIG_FLASH_CFI_DRIVER	1
+/* Max size that the board might have */
+#define CONFIG_SYS_FLASH_SIZE		0x1000000
+#define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+/* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	270
+/* "Real" (hardware) sectors protection */
+#define CONFIG_SYS_FLASH_PROTECTION
+#define CONFIG_SYS_FLASH_CHECKSUM
+#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }
+#else
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_SECT	270
+/* max number of sectors on one chip */
+#define CONFIG_SYS_MAX_FLASH_BANKS	0
+#endif
+
+/*
+ * This is setting for JFFS2 support in u-boot.
+ * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
+ */
+#ifdef CONFIG_CMD_JFFS2
+#define CONFIG_JFFS2_DEV		"nand0"
+#define CONFIG_JFFS2_PART_OFFSET	(0x800000)
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE
+#define MTDIDS_DEFAULT		"nand0=m54418twr.nand"
+
+#define MTDPARTS_DEFAULT	"mtdparts=m54418twr.nand:1m(data),"	\
+						"7m(kernel),"		\
+						"-(rootfs)"
+
+#endif
+
+#ifdef CONFIG_CMD_UBI
+#define CONFIG_CMD_MTDPARTS
+#define CONFIG_MTD_DEVICE	/* needed for mtdparts command */
+#define CONFIG_MTD_PARTITIONS	/* mtdparts and UBI support */
+#define CONFIG_RBTREE
+#define MTDIDS_DEFAULT		"nand0=NAND"
+#define MTDPARTS_DEFAULT	"mtdparts=NAND:1m(u-boot),"	\
+					"-(ubi)"
+#endif
+/* Cache Configuration */
+#define CONFIG_SYS_CACHELINE_SIZE	16
+#define ICACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - 8)
+#define DCACHE_STATUS			(CONFIG_SYS_INIT_RAM_ADDR + \
+					 CONFIG_SYS_INIT_RAM_SIZE - 4)
+#define CONFIG_SYS_ICACHE_INV		(CF_CACR_BCINVA + CF_CACR_ICINVA)
+#define CONFIG_SYS_DCACHE_INV		(CF_CACR_DCINVA)
+#define CONFIG_SYS_CACHE_ACR2		(CONFIG_SYS_SDRAM_BASE | \
+					 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
+					 CF_ACR_EN | CF_ACR_SM_ALL)
+#define CONFIG_SYS_CACHE_ICACR		(CF_CACR_BEC | CF_CACR_IEC | \
+					 CF_CACR_ICINVA | CF_CACR_EUSP)
+#define CONFIG_SYS_CACHE_DCACR		((CONFIG_SYS_CACHE_ICACR | \
+					 CF_CACR_DEC | CF_CACR_DDCM_P | \
+					 CF_CACR_DCINVA) & ~CF_CACR_ICINVA)
+
+#define CACR_STATUS	(CONFIG_SYS_INIT_RAM_ADDR + \
+			CONFIG_SYS_INIT_RAM_SIZE - 12)
+
+/*-----------------------------------------------------------------------
+ * Memory bank definitions
+ */
+/*
+ * CS0 - NOR Flash 16MB
+ * CS1 - Available
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+
+ /* Flash */
+#define CONFIG_SYS_CS0_BASE		0x00000000
+#define CONFIG_SYS_CS0_MASK		0x000F0101
+#define CONFIG_SYS_CS0_CTRL		0x00001D60
+
+#endif				/* _M54418TWR_H */
diff --git a/include/configs/MBX.h b/include/configs/MBX.h
index e8d0cd7..7145cc4 100644
--- a/include/configs/MBX.h
+++ b/include/configs/MBX.h
@@ -276,6 +276,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
diff --git a/include/configs/MPC8308RDB.h b/include/configs/MPC8308RDB.h
index a1fbece..95a1885 100644
--- a/include/configs/MPC8308RDB.h
+++ b/include/configs/MPC8308RDB.h
@@ -30,6 +30,7 @@
  */
 #define CONFIG_E300		1 /* E300 family */
 #define CONFIG_MPC83xx		1 /* MPC83xx family */
+#define CONFIG_MPC830x		1 /* MPC830x family */
 #define CONFIG_MPC8308		1 /* MPC8308 CPU specific */
 #define CONFIG_MPC8308RDB	1 /* MPC8308RDB board specific */
 
diff --git a/include/configs/NETTA.h b/include/configs/NETTA.h
index 604938d..074e01f 100644
--- a/include/configs/NETTA.h
+++ b/include/configs/NETTA.h
@@ -629,6 +629,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/NSCU.h b/include/configs/NSCU.h
index 9f462f4..f4184fc 100644
--- a/include/configs/NSCU.h
+++ b/include/configs/NSCU.h
@@ -318,6 +318,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h
index 98e7a42..cf184e7 100644
--- a/include/configs/P3041DS.h
+++ b/include/configs/P3041DS.h
@@ -36,6 +36,10 @@
 #define CONFIG_PCIE4
 #define CONFIG_SYS_DPAA_RMAN
 
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1			/* SRIO port 1 */
+#define CONFIG_SRIO2			/* SRIO port 2 */
+
 #define CONFIG_ICS307_REFCLK_HZ		25000000  /* ICS307 ref clk freq */
 
 #include "corenet_ds.h"
diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h
index d6f2f5c..53979dd 100644
--- a/include/configs/P4080DS.h
+++ b/include/configs/P4080DS.h
@@ -33,6 +33,10 @@
 #define CONFIG_MMC
 #define CONFIG_PCIE3
 
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1			/* SRIO port 1 */
+#define CONFIG_SRIO2			/* SRIO port 2 */
+
 #define CONFIG_ICS307_REFCLK_HZ		33333000  /* ICS307 ref clk freq */
 
 #include "corenet_ds.h"
diff --git a/include/configs/P5020DS.h b/include/configs/P5020DS.h
index 8625f76..7018d7a 100644
--- a/include/configs/P5020DS.h
+++ b/include/configs/P5020DS.h
@@ -37,6 +37,10 @@
 #define CONFIG_SYS_FSL_RAID_ENGINE
 #define CONFIG_SYS_DPAA_RMAN
 
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1			/* SRIO port 1 */
+#define CONFIG_SRIO2			/* SRIO port 2 */
+
 #define CONFIG_ICS307_REFCLK_HZ		25000000  /* ICS307 ref clk freq */
 
 #include "corenet_ds.h"
diff --git a/include/configs/R360MPI.h b/include/configs/R360MPI.h
index 9befacb..868a0b8 100644
--- a/include/configs/R360MPI.h
+++ b/include/configs/R360MPI.h
@@ -329,6 +329,7 @@
  */
 
 #if 1
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/RPXClassic.h b/include/configs/RPXClassic.h
index b215c2d..3595200 100644
--- a/include/configs/RPXClassic.h
+++ b/include/configs/RPXClassic.h
@@ -314,6 +314,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/RPXlite.h b/include/configs/RPXlite.h
index 8ffb014..563abea 100644
--- a/include/configs/RPXlite.h
+++ b/include/configs/RPXlite.h
@@ -249,6 +249,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/RPXlite_DW.h b/include/configs/RPXlite_DW.h
index f8bcf0f..67ab1e9 100644
--- a/include/configs/RPXlite_DW.h
+++ b/include/configs/RPXlite_DW.h
@@ -335,6 +335,7 @@
  * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
  *-----------------------------------------------------------------------
  */
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
diff --git a/include/configs/RRvision.h b/include/configs/RRvision.h
index 671d521..e2b22f0 100644
--- a/include/configs/RRvision.h
+++ b/include/configs/RRvision.h
@@ -329,6 +329,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/SBC8540.h b/include/configs/SBC8540.h
deleted file mode 100644
index d448bf6..0000000
--- a/include/configs/SBC8540.h
+++ /dev/null
@@ -1,428 +0,0 @@
-/*
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8540 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * sbc8540 board configuration file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Top level Makefile configuration choices
- */
-#ifdef CONFIG_66
-#define CONFIG_PCI_66
-#endif
-
-#define TSEC_DEBUG
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_BOOKE		1	/* BOOKE			*/
-#define CONFIG_E500		1	/* BOOKE e500 family		*/
-#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560		*/
-#define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfffc0000
-
-
-#define CONFIG_CPM2		1	/* has CPM2 */
-
-#define CONFIG_SBC8540		1	/* configuration for SBC8560 board */
-#define CONFIG_MPC8540		1
-
-#define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific (supplement)	*/
-
-#define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
-#undef	CONFIG_PCI			/* pci ethernet support		*/
-#undef  CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support	*/
-
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
-#define CONFIG_ENV_OVERWRITE
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you need a flash-boot image(u-boot.bin), if so undef this.
- */
-#undef CONFIG_RAM_AS_FLASH
-
-#if defined(CONFIG_PCI_66)			/* some PCI card is 33Mhz only	*/
-  #define CONFIG_SYS_CLK_FREQ	66000000	/* sysclk for MPC85xx		*/
-#else
-  #define CONFIG_SYS_CLK_FREQ	33000000	/* most pci cards are 33Mhz	*/
-#endif
-
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE			    /* toggle L2 cache		*/
-#undef	CONFIG_BTB			    /* toggle branch predition	*/
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
-#define CONFIG_RESET_PHY_R	1	    /* Call reset_phy() */
-
-#undef	CONFIG_SYS_DRAM_TEST			    /* memory test, takes time	*/
-#define CONFIG_SYS_MEMTEST_START	0x00200000  /* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
-#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
-     defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
-     defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
-#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
-#endif
-
-#define CONFIG_SYS_SDRAM_SIZE		512		/* DDR is 512MB */
-
-/* DDR Setup */
-#define CONFIG_FSL_DDR1
-#undef CONFIG_FSL_DDR_INTERACTIVE
-#undef  CONFIG_DDR_ECC				/* only for ECC DDR module	*/
-#undef  CONFIG_SPD_EEPROM			/* Use SPD EEPROM for DDR setup */
-#undef  CONFIG_DDR_SPD
-
-#if defined(CONFIG_MPC85xx_REV1)
-#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	/* possible DLL fix needed */
-#endif
-
-#undef  CONFIG_DDR_ECC			    /* only for ECC DDR module */
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	2
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS	0x55	/* CTLR 0 DIMM 0 */
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#if defined(CONFIG_RAM_AS_FLASH)
-  #define CONFIG_SYS_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
-  #define CONFIG_SYS_FLASH_BASE	0xf8000000      /* start of FLASH 8M  */
-  #define CONFIG_SYS_BR0_PRELIM	0xf8000801      /* port size 8bit */
-  #define CONFIG_SYS_OR0_PRELIM	0xf8000ff7	/* 8MB Flash		*/
-#else /* Boot from real Flash */
-  #define CONFIG_SYS_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
-  #define CONFIG_SYS_FLASH_BASE	0xff800000      /* start of FLASH 8M    */
-  #define CONFIG_SYS_BR0_PRELIM	0xff800801      /* port size 8bit      */
-  #define CONFIG_SYS_OR0_PRELIM	0xff800ff7	/* 8MB Flash		*/
-#endif
-#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
-
-/* local bus definitions */
-#define CONFIG_SYS_BR1_PRELIM		0xe4001801	/* 64M, 32-bit flash */
-#define CONFIG_SYS_OR1_PRELIM		0xfc000ff7
-
-#define CONFIG_SYS_BR2_PRELIM		0x00000000	/* CS2 not used */
-#define CONFIG_SYS_OR2_PRELIM		0x00000000
-
-#define CONFIG_SYS_BR3_PRELIM		0xf0001861	/* 64MB localbus SDRAM	*/
-#define CONFIG_SYS_OR3_PRELIM		0xfc000cc1
-
-#if defined(CONFIG_RAM_AS_FLASH)
-  #define CONFIG_SYS_BR4_PRELIM	0xf4001861	/* 64M localbus SDRAM */
-#else
-  #define CONFIG_SYS_BR4_PRELIM	0xf8001861	/* 64M localbus SDRAM */
-#endif
-#define CONFIG_SYS_OR4_PRELIM		0xfc000cc1
-
-#define CONFIG_SYS_BR5_PRELIM		0xfc000801	/* 16M CS5 misc devices */
-#if 1
-  #define CONFIG_SYS_OR5_PRELIM	0xff000ff7
-#else
-  #define CONFIG_SYS_OR5_PRELIM	0xff0000f0
-#endif
-
-#define CONFIG_SYS_BR6_PRELIM		0xe0001801	/* 64M, 32-bit flash */
-#define CONFIG_SYS_OR6_PRELIM		0xfc000ff7
-#define CONFIG_SYS_LBC_LCRR		0x00030002	/* local bus freq	*/
-#define CONFIG_SYS_LBC_LBCR		0x00000000
-#define CONFIG_SYS_LBC_LSRT		0x20000000
-#define CONFIG_SYS_LBC_MRTPR		0x20000000
-#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
-#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
-#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
-
-/* just hijack the MOT BCSR def for SBC8560 misc devices */
-#define CONFIG_SYS_BCSR		((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000)
-/* the size of CS5 needs to be >= 16M for TLB and LAW setups */
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
-
-/* Serial Port */
-#undef  CONFIG_CONS_ON_SCC			/* define if console on SCC */
-#undef	CONFIG_CONS_NONE			/* define if console on something else */
-
-#define CONFIG_CONS_INDEX     1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#if 0
-#define CONFIG_SYS_NS16550_CLK		1843200 /* get_bus_freq(0) */
-#else
-#define CONFIG_SYS_NS16550_CLK		264000000 /* get_bus_freq(0) */
-#endif
-
-#define CONFIG_BAUDRATE		9600
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#if 0
-#define CONFIG_SYS_NS16550_COM1	((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000)
-#define CONFIG_SYS_NS16550_COM2	((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000)
-#else
-/* SBC8540 uses internal COMM controller */
-#define CONFIG_SYS_NS16550_COM1	((CONFIG_SYS_CCSRBAR & 0xfff00000)+0x00004500)
-#define CONFIG_SYS_NS16550_COM2	((CONFIG_SYS_CCSRBAR & 0xfff00000)+0x00004600)
-#endif
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/*
- * I2C
- */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-
-#define CONFIG_SYS_PCI_MEM_BASE	0xC0000000
-#define CONFIG_SYS_PCI_MEM_PHYS	0xC0000000
-#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000
-
-#if defined(CONFIG_TSEC_ENET)		/* TSEC Ethernet port */
-
-#  define CONFIG_MPC85xx_TSEC1
-#  define CONFIG_MPC85xx_TSEC1_NAME	"TSEC0"
-#  define CONFIG_MII		1	/* MII PHY management		*/
-#  define TSEC1_PHY_ADDR	25
-#  define TSEC1_PHYIDX		0
-/* Options are: TSEC0 */
-#  define CONFIG_ETHPRIME		"TSEC0"
-
-
-#elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
-
-  #undef  CONFIG_ETHER_NONE		/* define if ether on something else */
-  #define CONFIG_ETHER_ON_FCC2		/* cpm FCC ethernet support	*/
-  #define CONFIG_ETHER_INDEX	2	/* which channel for ether  */
-
-  #if (CONFIG_ETHER_INDEX == 2)
-    /*
-     * - Rx-CLK is CLK13
-     * - Tx-CLK is CLK14
-     * - Select bus for bd/buffers
-     * - Full duplex
-     */
-    #define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-    #define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-    #define CONFIG_SYS_CPMFCR_RAMTYPE	0
-    #define CONFIG_SYS_FCC_PSMR	(FCC_PSMR_FDE)
-
-  #elif (CONFIG_ETHER_INDEX == 3)
-    /* need more definitions here for FE3 */
-  #endif				/* CONFIG_ETHER_INDEX */
-
-  #define CONFIG_MII			/* MII PHY management */
-  #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
-  /*
-   * GPIO pins used for bit-banged MII communications
-   */
-  #define MDIO_PORT	2		/* Port C */
-  #define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
-				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-  #define MDC_DECLARE	MDIO_DECLARE
-
-  #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
-  #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
-  #define MDIO_READ	((iop->pdat &  0x00400000) != 0)
-
-  #define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
-			else	iop->pdat &= ~0x00400000
-
-  #define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
-			else	iop->pdat &= ~0x00200000
-
-  #define MIIDELAY	udelay(1)
-
-#endif
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant		*/
-#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver		*/
-#if 0
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)     */
-#define CONFIG_SYS_FLASH_PROTECTION		/* use hardware protection		*/
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip	*/
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
-
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	200000		/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	50000		/* Timeout for Flash Write (in ms)	*/
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor	*/
-
-#if 0
-/* XXX This doesn't work and I don't want to fix it */
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-  #define CONFIG_SYS_RAMBOOT
-#else
-  #undef  CONFIG_SYS_RAMBOOT
-#endif
-#endif
-
-/* Environment */
-#if !defined(CONFIG_SYS_RAMBOOT)
-  #if defined(CONFIG_RAM_AS_FLASH)
-    #define CONFIG_ENV_IS_NOWHERE
-    #define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x100000)
-    #define CONFIG_ENV_SIZE	0x2000
-  #else
-    #define CONFIG_ENV_IS_IN_FLASH	1
-    #define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
-    #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-    #define CONFIG_ENV_SIZE	0x2000 /* CONFIG_ENV_SECT_SIZE */
-  #endif
-#else
-  #define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now	*/
-  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
-  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-  #define CONFIG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_BOOTARGS "root=/dev/nfs rw nfsroot=192.168.0.251:/tftpboot ip=192.168.0.105:192.168.0.251::255.255.255.0:sbc8560:eth0:off console=ttyS0,9600"
-/*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTCOMMAND	"bootm 0xff800000 0xffa00000"
-#define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-    #define CONFIG_CMD_MII
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"SBC8540=> " /* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-  #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-  #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
-
-#if defined(CONFIG_CMD_KGDB)
-  #define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-  #define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-/*Note: change below for your network setting!!! */
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-#  define CONFIG_ETHADDR	00:vv:ww:xx:yy:8a
-#  define CONFIG_HAS_ETH1
-#  define CONFIG_ETH1ADDR	00:vv:ww:xx:yy:8b
-#  define CONFIG_HAS_ETH2
-#  define CONFIG_ETH2ADDR	00:vv:ww:xx:yy:8c
-#endif
-
-#define CONFIG_SERVERIP		YourServerIP
-#define CONFIG_IPADDR		YourTargetIP
-#define CONFIG_GATEWAYIP	YourGatewayIP
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_HOSTNAME		SBC8560
-#define CONFIG_ROOTPATH		"YourRootPath"
-#define CONFIG_BOOTFILE		"YourImageName"
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/SCM.h b/include/configs/SCM.h
deleted file mode 100644
index 87d52ba..0000000
--- a/include/configs/SCM.h
+++ /dev/null
@@ -1,710 +0,0 @@
-/*
- * (C) Copyright 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC8260		1	/* This is a MPC8260 CPU		*/
-#define CONFIG_TQM8260		200	/* ...on a TQM8260 module Rev.200	*/
-#define CONFIG_SCM              1	/* ...on a System Controller Module	*/
-#define CONFIG_CPM2		1	/* Has a CPM2 */
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#if (CONFIG_TQM8260 <= 100)
-#  error "TQM8260 module revison not supported"
-#endif
-
-/* We use a TQM8260 module with a 300MHz CPU */
-#define CONFIG_300MHz
-
-/* Define 60x busmode only if your TQM8260 has L2 cache! */
-#ifdef CONFIG_L2_CACHE
-#  define CONFIG_BUSMODE_60x	1	/* bus mode: 60x			*/
-#else
-#  undef  CONFIG_BUSMODE_60x		/* bus mode: 8260			*/
-#endif
-
-/* The board with 300MHz CPU doesn't have L2 cache, but works in 60x bus mode */
-#ifdef CONFIG_300MHz
-#  define CONFIG_BUSMODE_60x
-#endif
-
-#define CONFIG_82xx_CONS_SMC1	1	/* console on SMC1			*/
-
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"bootp; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"bootm"
-
-/* enable I2C and select the hardware/software driver */
-#undef  CONFIG_HARD_I2C			/* I2C with hardware support	*/
-#define CONFIG_SOFT_I2C		1	/* I2C bit-banged		*/
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-
-/*
- * Software (bit-bang) I2C driver configuration
- */
-
-#define I2C_PORT	3		/* Port A=0, B=1, C=2, D=3 */
-#define I2C_ACTIVE	(iop->pdir |=  0x00010000)
-#define I2C_TRISTATE	(iop->pdir &= ~0x00010000)
-#define I2C_READ	((iop->pdat & 0x00010000) != 0)
-#define I2C_SDA(bit)	if(bit) iop->pdat |=  0x00010000; \
-			else    iop->pdat &= ~0x00010000
-#define I2C_SCL(bit)	if(bit) iop->pdat |=  0x00020000; \
-			else    iop->pdat &= ~0x00020000
-#define I2C_DELAY	udelay(5)	/* 1/4 I2C clock duration */
-
-#define CONFIG_SYS_I2C_EEPROM_ADDR	0x50
-#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
-#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	10	/* and takes up to 10 msec */
-
-#define CONFIG_I2C_X
-
-/*
- * select serial console configuration
- *
- * if either CONFIG_CONS_ON_SMC or CONFIG_CONS_ON_SCC is selected, then
- * CONFIG_CONS_INDEX must be set to the channel number (1-2 for SMC, 1-4
- * for SCC).
- *
- * if CONFIG_CONS_NONE is defined, then the serial console routines must
- * defined elsewhere (for example, on the cogent platform, there are serial
- * ports on the motherboard which are used for the serial console - see
- * cogent/cma101/serial.[ch]).
- */
-#define CONFIG_CONS_ON_SMC		/* define if console on SMC */
-#undef  CONFIG_CONS_ON_SCC		/* define if console on SCC */
-#undef  CONFIG_CONS_NONE		/* define if console on something else*/
-#ifdef CONFIG_82xx_CONS_SMC1
-#define CONFIG_CONS_INDEX	1	/* which serial channel for console */
-#endif
-#ifdef CONFIG_82xx_CONS_SMC2
-#define CONFIG_CONS_INDEX	2	/* which serial channel for console */
-#endif
-
-#undef  CONFIG_CONS_USE_EXTC		/* SMC/SCC use ext clock not brg_clk */
-#define CONFIG_CONS_EXTC_RATE	3686400	/* SMC/SCC ext clk rate in Hz */
-#define CONFIG_CONS_EXTC_PINSEL	0	/* pin select 0=CLK3/CLK9 */
-
-/*
- * select ethernet configuration
- *
- * if either CONFIG_ETHER_ON_SCC or CONFIG_ETHER_ON_FCC is selected, then
- * CONFIG_ETHER_INDEX must be set to the channel number (1-4 for SCC, 1-3
- * for FCC)
- *
- * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
- * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
- *
- * (On TQM8260 either SCC1 or FCC2 may be chosen: SCC1 is hardwired to the
- * X.29 connector, and FCC2 is hardwired to the X.1 connector)
- */
-#undef	CONFIG_ETHER_ON_SCC		/* define if ether on SCC       */
-#define	CONFIG_ETHER_ON_FCC		/* define if ether on FCC       */
-#undef	CONFIG_ETHER_NONE		/* define if ether on something else */
-#define	CONFIG_ETHER_INDEX    1		/* which SCC/FCC channel for ethernet */
-
-#if defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 1)
-
-/*
- * - Rx-CLK is CLK12
- * - Tx-CLK is CLK11
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK1	(CMXFCR_FC1|CMXFCR_RF1CS_MSK|CMXFCR_TF1CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE1	(CMXFCR_RF1CS_CLK12|CMXFCR_TF1CS_CLK11)
-# define CONFIG_SYS_CPMFCR_RAMTYPE	0
-# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-#elif defined(CONFIG_ETHER_ON_FCC) && (CONFIG_ETHER_INDEX == 3)
-
-/*
- * - Rx-CLK is CLK15
- * - Tx-CLK is CLK16
- * - RAM for BD/Buffers is on the 60x Bus (see 28-13)
- * - Enable Full Duplex in FSMR
- */
-# define CONFIG_SYS_CMXFCR_MASK3	(CMXFCR_FC3|CMXFCR_RF3CS_MSK|CMXFCR_TF3CS_MSK)
-# define CONFIG_SYS_CMXFCR_VALUE3	(CMXFCR_RF3CS_CLK15|CMXFCR_TF3CS_CLK16)
-# define CONFIG_SYS_CPMFCR_RAMTYPE	0
-# define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE|FCC_PSMR_LPB)
-
-#endif /* CONFIG_ETHER_ON_FCC, CONFIG_ETHER_INDEX */
-
-
-/* system clock rate (CLKIN) - equal to the 60x and local bus speed */
-#ifndef CONFIG_300MHz
-#define CONFIG_8260_CLKIN	66666666	/* in Hz */
-#else
-#define CONFIG_8260_CLKIN	83333000	/* in Hz */
-#endif
-
-#if defined(CONFIG_CONS_NONE) || defined(CONFIG_CONS_USE_EXTC)
-#define CONFIG_BAUDRATE		230400
-#else
-#define CONFIG_BAUDRATE		115200
-#endif
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_EEPROM
-#define CONFIG_CMD_BSP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START 0x0400000	/* memtest works on		*/
-#define CONFIG_SYS_MEMTEST_END	0x0C00000	/* 4 ... 12 MB in DRAM		*/
-
-#define	CONFIG_SYS_LOAD_ADDR	0x100000	/* default load address		*/
-
-#define	CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks	*/
-
-#define	CONFIG_SYS_RESET_ADDRESS 0xFFFFFFFC	/* "bad" address		*/
-
-#define CONFIG_MISC_INIT_R		/* have misc_init_r() function	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ        (8 << 20)       /* Initial Memory map for Linux */
-
-
-/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/tqm8260/config.mk
- * The main FLASH is whichever is connected to *CS0.
- */
-#define CONFIG_SYS_FLASH0_BASE 0x40000000
-#define CONFIG_SYS_FLASH1_BASE 0x60000000
-#define CONFIG_SYS_FLASH0_SIZE 32
-#define CONFIG_SYS_FLASH1_SIZE 32
-
-/* Flash bank size (for preliminary settings)
- */
-#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max num of memory banks      */
-#define CONFIG_SYS_MAX_FLASH_SECT	128	/* max num of sects on one chip */
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	240000	/* Flash Erase Timeout (in ms)  */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (in ms)  */
-
-#if 0
-/* Start port with environment in flash; switch to EEPROM later */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE+0x40000)
-#define CONFIG_ENV_SIZE		0x40000
-#define CONFIG_ENV_SECT_SIZE	0x40000
-#else
-/* Final version: environment in EEPROM */
-#define CONFIG_ENV_IS_IN_EEPROM	1
-#define CONFIG_ENV_OFFSET		0
-#define CONFIG_ENV_SIZE		2048
-#endif
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * Hard Reset Configuration Words
- *
- * if you change bits in the HRCW, you must also change the CONFIG_SYS_*
- * defines for the various registers affected by the HRCW e.g. changing
- * HRCW_DPPCxx requires you to also change CONFIG_SYS_SIUMCR.
- */
-#if defined(CONFIG_266MHz)
-#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \
-							      HRCW_MODCK_H0111)
-#elif defined(CONFIG_300MHz)
-#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS | \
-							      HRCW_MODCK_H0110)
-#else
-#define CONFIG_SYS_HRCW_MASTER		(HRCW_CIP | HRCW_ISB111 | HRCW_BMS)
-#endif
-
-/* no slaves so just fill with zeros */
-#define CONFIG_SYS_HRCW_SLAVE1		0
-#define CONFIG_SYS_HRCW_SLAVE2		0
-#define CONFIG_SYS_HRCW_SLAVE3		0
-#define CONFIG_SYS_HRCW_SLAVE4		0
-#define CONFIG_SYS_HRCW_SLAVE5		0
-#define CONFIG_SYS_HRCW_SLAVE6		0
-#define CONFIG_SYS_HRCW_SLAVE7		0
-
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000  /* Size of used area in DPRAM    */
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- *
- * 60x SDRAM is mapped at CONFIG_SYS_SDRAM_BASE, local SDRAM
- * is mapped at SDRAM_BASE2_PRELIM.
- */
-#define CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()*/
-
-/*-----------------------------------------------------------------------
- * Hardware Information Block
- */
-#define CONFIG_SYS_HWINFO_OFFSET	0x0003FFC0	/* offset of HW Info block */
-#define CONFIG_SYS_HWINFO_SIZE		0x00000040	/* size   of HW Info block */
-#define CONFIG_SYS_HWINFO_MAGIC	0x54514D38	/* 'TQM8' */
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE      32      /* For MPC8260 CPU              */
-#if defined(CONFIG_CMD_KGDB)
-# define CONFIG_SYS_CACHELINE_SHIFT	5	/* log base 2 of the above value */
-#endif
-
-/*-----------------------------------------------------------------------
- * HIDx - Hardware Implementation-dependent Registers                    2-11
- *-----------------------------------------------------------------------
- * HID0 also contains cache control - initially enable both caches and
- * invalidate contents, then the final state leaves only the instruction
- * cache enabled. Note that Power-On and Hard reset invalidate the caches,
- * but Soft reset does not.
- *
- * HID1 has only read-only information - nothing to set.
- */
-#define CONFIG_SYS_HID0_INIT   (HID0_ICE|HID0_DCE|HID0_ICFI|HID0_DCI|\
-				HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID0_FINAL  (HID0_IFEM|HID0_ABE)
-#define CONFIG_SYS_HID2        0
-
-/*-----------------------------------------------------------------------
- * RMR - Reset Mode Register                                     5-5
- *-----------------------------------------------------------------------
- * turn on Checkstop Reset Enable
- */
-#define CONFIG_SYS_RMR         RMR_CSRE
-
-/*-----------------------------------------------------------------------
- * BCR - Bus Configuration                                       4-25
- *-----------------------------------------------------------------------
- */
-#ifdef	CONFIG_BUSMODE_60x
-#define CONFIG_SYS_BCR         (BCR_EBM|BCR_L2C|BCR_LETM|\
-			 BCR_NPQM0|BCR_NPQM1|BCR_NPQM2)	/* 60x mode  */
-#else
-#define BCR_APD01	0x10000000
-#define CONFIG_SYS_BCR		(BCR_APD01|BCR_ETM|BCR_LETM)	/* 8260 mode */
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration                             4-31
- *-----------------------------------------------------------------------
- */
-#if 0
-#define CONFIG_SYS_SIUMCR      (SIUMCR_DPPC10|SIUMCR_APPC10)
-#else
-#define CONFIG_SYS_SIUMCR      (SIUMCR_DPPC00|SIUMCR_APPC10)
-#endif
-
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control                             4-35
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Watchdog & Bus Monitor Timer max, 60x Bus Monitor enable
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
-			 SYPCR_SWRI|SYPCR_SWP|SYPCR_SWE)
-#else
-#define CONFIG_SYS_SYPCR       (SYPCR_SWTC|SYPCR_BMT|SYPCR_PBME|SYPCR_LBME|\
-			 SYPCR_SWRI|SYPCR_SWP)
-#endif /* CONFIG_WATCHDOG */
-
-/*-----------------------------------------------------------------------
- * TMCNTSC - Time Counter Status and Control                     4-40
- *-----------------------------------------------------------------------
- * Clear once per Second and Alarm Interrupt Status, Set 32KHz timersclk,
- * and enable Time Counter
- */
-#define CONFIG_SYS_TMCNTSC     (TMCNTSC_SEC|TMCNTSC_ALR|TMCNTSC_TCF|TMCNTSC_TCE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control                 4-42
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Set 32KHz timersclk, and enable
- * Periodic timer
- */
-#define CONFIG_SYS_PISCR       (PISCR_PS|PISCR_PTF|PISCR_PTE)
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock Control                                   9-8
- *-----------------------------------------------------------------------
- * Ensure DFBRG is Divide by 16
- */
-#define CONFIG_SYS_SCCR        0
-
-/*-----------------------------------------------------------------------
- * RCCR - RISC Controller Configuration                         13-7
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RCCR        0
-
-/*
- * Init Memory Controller:
- *
- * Bank Bus     Machine PortSz  Device
- * ---- ---     ------- ------  ------
- *  0   60x     GPCM    64 bit  FLASH
- *  1   60x     SDRAM   64 bit  SDRAM
- *  2   Local   SDRAM   32 bit  SDRAM
- *
- */
-
-	/* Initialize SDRAM on local bus
-	 */
-#define CONFIG_SYS_INIT_LOCAL_SDRAM
-
-#define SDRAM_MAX_SIZE	0x08000000	/* max. 128 MB		*/
-
-/* Minimum mask to separate preliminary
- * address ranges for CS[0:2]
- */
-#define CONFIG_SYS_GLOBAL_SDRAM_LIMIT	(512<<20)	/* less than 512 MB */
-#define CONFIG_SYS_LOCAL_SDRAM_LIMIT	(128<<20)	/* less than 128 MB */
-
-#define CONFIG_SYS_MPTPR       0x4000
-
-/*-----------------------------------------------------------------------------
- * Address for Mode Register Set (MRS) command
- *-----------------------------------------------------------------------------
- * In fact, the address is rather configuration data presented to the SDRAM on
- * its address lines. Because the address lines may be mux'ed externally either
- * for 8 column or 9 column devices, some bits appear twice in the 8260's
- * address:
- *
- * |   (RFU)   |   (RFU)   | WBL |    TM    |     CL    |  BT | Burst Length |
- * | BA1   BA0 | A12 : A10 |  A9 |  A8   A7 |  A6 : A4  |  A3 |   A2 :  A0   |
- *  8 columns mux'ing:     |  A9 | A10  A21 | A22 : A24 | A25 |  A26 : A28   |
- *  9 columns mux'ing:     |  A8 | A20  A21 | A22 : A24 | A25 |  A26 : A28   |
- *  Settings:              |  0  |  0    0  |  0  1  0  |  0  |   0  1  0    |
- *-----------------------------------------------------------------------------
- */
-#define CONFIG_SYS_MRS_OFFS	0x00000110
-
-
-/* Bank 0 - FLASH
- */
-#define CONFIG_SYS_BR0_PRELIM  ((CONFIG_SYS_FLASH_BASE & BRx_BA_MSK)  |\
-			 BRx_PS_64                      |\
-			 BRx_MS_GPCM_P                  |\
-			 BRx_V)
-
-#define CONFIG_SYS_OR0_PRELIM  (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE)      |\
-			 ORxG_CSNT                      |\
-			 ORxG_ACS_DIV1                  |\
-			 ORxG_SCY_3_CLK                 |\
-			 ORxG_EHTR                      |\
-			 ORxG_TRLX)
-
-	/* SDRAM on TQM8260 can have either 8 or 9 columns.
-	 * The number affects configuration values.
-	 */
-
-/* Bank 1 - 60x bus SDRAM
- */
-#define CONFIG_SYS_PSRT        0x20
-#define CONFIG_SYS_LSRT        0x20
-#ifndef CONFIG_SYS_RAMBOOT
-#define CONFIG_SYS_BR1_PRELIM  ((CONFIG_SYS_SDRAM_BASE & BRx_BA_MSK)  |\
-			 BRx_PS_64                      |\
-			 BRx_MS_SDRAM_P                 |\
-			 BRx_V)
-
-#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR1_8COL
-
-
-	/* SDRAM initialization values for 8-column chips
-	 */
-#define CONFIG_SYS_OR1_8COL    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
-			 ORxS_BPD_4                     |\
-			 ORxS_ROWST_PBI1_A7             |\
-			 ORxS_NUMR_12)
-
-#define CONFIG_SYS_PSDMR_8COL  (PSDMR_PBI                      |\
-			 PSDMR_SDAM_A15_IS_A5           |\
-			 PSDMR_BSMA_A12_A14             |\
-			 PSDMR_SDA10_PBI1_A8            |\
-			 PSDMR_RFRC_7_CLK               |\
-			 PSDMR_PRETOACT_2W              |\
-			 PSDMR_ACTTORW_2W               |\
-			 PSDMR_LDOTOPRE_1C              |\
-			 PSDMR_WRC_2C                   |\
-			 PSDMR_EAMUX                    |\
-			 PSDMR_CL_2)
-
-	/* SDRAM initialization values for 9-column chips
-	 */
-#define CONFIG_SYS_OR1_9COL    ((~(CONFIG_SYS_GLOBAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
-			 ORxS_BPD_4                     |\
-			 ORxS_ROWST_PBI1_A5             |\
-			 ORxS_NUMR_13)
-
-#define CONFIG_SYS_PSDMR_9COL  (PSDMR_PBI                      |\
-			 PSDMR_SDAM_A16_IS_A5           |\
-			 PSDMR_BSMA_A12_A14             |\
-			 PSDMR_SDA10_PBI1_A7            |\
-			 PSDMR_RFRC_7_CLK               |\
-			 PSDMR_PRETOACT_2W              |\
-			 PSDMR_ACTTORW_2W               |\
-			 PSDMR_LDOTOPRE_1C              |\
-			 PSDMR_WRC_2C                   |\
-			 PSDMR_EAMUX                    |\
-			 PSDMR_CL_2)
-
-/* Bank 2 - Local bus SDRAM
- */
-#ifdef CONFIG_SYS_INIT_LOCAL_SDRAM
-#define CONFIG_SYS_BR2_PRELIM  ((SDRAM_BASE2_PRELIM & BRx_BA_MSK) |\
-			 BRx_PS_32                      |\
-			 BRx_MS_SDRAM_L                 |\
-			 BRx_V)
-
-#define CONFIG_SYS_OR2_PRELIM	CONFIG_SYS_OR2_8COL
-
-#define SDRAM_BASE2_PRELIM	0x80000000
-
-	/* SDRAM initialization values for 8-column chips
-	 */
-#define CONFIG_SYS_OR2_8COL    ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
-			 ORxS_BPD_4                     |\
-			 ORxS_ROWST_PBI1_A8             |\
-			 ORxS_NUMR_12)
-
-#define CONFIG_SYS_LSDMR_8COL  (PSDMR_PBI                      |\
-			 PSDMR_SDAM_A15_IS_A5           |\
-			 PSDMR_BSMA_A13_A15             |\
-			 PSDMR_SDA10_PBI1_A9            |\
-			 PSDMR_RFRC_7_CLK               |\
-			 PSDMR_PRETOACT_2W              |\
-			 PSDMR_ACTTORW_2W               |\
-			 PSDMR_BL                       |\
-			 PSDMR_LDOTOPRE_1C              |\
-			 PSDMR_WRC_2C                   |\
-			 PSDMR_CL_2)
-
-	/* SDRAM initialization values for 9-column chips
-	 */
-#define CONFIG_SYS_OR2_9COL    ((~(CONFIG_SYS_LOCAL_SDRAM_LIMIT-1) & ORxS_SDAM_MSK) |\
-			 ORxS_BPD_4                     |\
-			 ORxS_ROWST_PBI1_A6             |\
-			 ORxS_NUMR_13)
-
-#define CONFIG_SYS_LSDMR_9COL  (PSDMR_PBI                      |\
-			 PSDMR_SDAM_A16_IS_A5           |\
-			 PSDMR_BSMA_A13_A15             |\
-			 PSDMR_SDA10_PBI1_A8            |\
-			 PSDMR_RFRC_7_CLK               |\
-			 PSDMR_PRETOACT_2W              |\
-			 PSDMR_ACTTORW_2W               |\
-			 PSDMR_BL                       |\
-			 PSDMR_LDOTOPRE_1C              |\
-			 PSDMR_WRC_2C                   |\
-			 PSDMR_CL_2)
-
-#endif /* CONFIG_SYS_INIT_LOCAL_SDRAM */
-
-#endif /* CONFIG_SYS_RAMBOOT */
-
-#define CONFIG_SYS_CAN0_BASE		0xc0000000
-#define CONFIG_SYS_CAN1_BASE		0xc0008000
-#define CONFIG_SYS_FIOX_BASE		0xc0010000
-#define CONFIG_SYS_FDOHM_BASE		0xc0018000
-#define CONFIG_SYS_EXTPROM_BASE	0xc2000000
-
-#define CONFIG_SYS_CAN_SIZE		0x00000100
-#define CONFIG_SYS_FIOX_SIZE		0x00000020
-#define CONFIG_SYS_FDOHM_SIZE		0x00002000
-#define CONFIG_SYS_EXTPROM_BANK_SIZE	0x01000000
-
-#define EXT_EEPROM_MAX_FLASH_BANKS	0x02
-
-/* CS3 - CAN 0
- */
-#define CONFIG_SYS_CAN0_BR3   ((CONFIG_SYS_CAN0_BASE & BRx_BA_MSK)	|\
-			BRx_PS_8			|\
-			BRx_MS_UPMA			|\
-			BRx_V)
-
-#define CONFIG_SYS_CAN0_OR3   (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE)	|\
-			ORxU_BI				|\
-			ORxU_EHTR_4IDLE)
-
-/* CS4 - CAN 1
- */
-#define CONFIG_SYS_CAN1_BR4   ((CONFIG_SYS_CAN1_BASE & BRx_BA_MSK)	|\
-			BRx_PS_8			|\
-			BRx_MS_UPMA			|\
-			BRx_V)
-
-#define CONFIG_SYS_CAN1_OR4   (P2SZ_TO_AM(CONFIG_SYS_CAN_SIZE)	|\
-			ORxU_BI				|\
-			ORxU_EHTR_4IDLE)
-
-/* CS5 - Extended PROM (16MB optional)
- */
-#define CONFIG_SYS_EXTPROM_BR5 ((CONFIG_SYS_EXTPROM_BASE & BRx_BA_MSK)|\
-			BRx_PS_32			|\
-			BRx_MS_GPCM_P			|\
-			BRx_V)
-
-#define CONFIG_SYS_EXTPROM_OR5 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\
-			ORxG_CSNT			|\
-			ORxG_ACS_DIV4			|\
-			ORxG_SCY_5_CLK			|\
-			ORxG_TRLX)
-
-/* CS6 - Extended PROM (16MB optional)
- */
-#define CONFIG_SYS_EXTPROM_BR6 (((CONFIG_SYS_EXTPROM_BASE + \
-			CONFIG_SYS_EXTPROM_BANK_SIZE) & BRx_BA_MSK)|\
-			BRx_PS_32			|\
-			BRx_MS_GPCM_P			|\
-			BRx_V)
-
-#define CONFIG_SYS_EXTPROM_OR6 (P2SZ_TO_AM(CONFIG_SYS_EXTPROM_BANK_SIZE)|\
-			ORxG_CSNT			|\
-			ORxG_ACS_DIV4			|\
-			ORxG_SCY_5_CLK			|\
-			ORxG_TRLX)
-
-/* CS7 - FPGA FIOX: Glue Logic
- */
-#define CONFIG_SYS_FIOX_BR7   ((CONFIG_SYS_FIOX_BASE & BRx_BA_MSK)	|\
-			BRx_PS_32			|\
-			BRx_MS_GPCM_P			|\
-			BRx_V)
-
-#define CONFIG_SYS_FIOX_OR7   (P2SZ_TO_AM(CONFIG_SYS_FIOX_SIZE)	|\
-			ORxG_ACS_DIV4			|\
-			ORxG_SCY_5_CLK			|\
-			ORxG_TRLX)
-
-/* CS8 - FPGA DOH Master
- */
-#define CONFIG_SYS_FDOHM_BR8  ((CONFIG_SYS_FDOHM_BASE & BRx_BA_MSK)	|\
-			BRx_PS_16			|\
-			BRx_MS_GPCM_P			|\
-			BRx_V)
-
-#define CONFIG_SYS_FDOHM_OR8  (P2SZ_TO_AM(CONFIG_SYS_FDOHM_SIZE)	|\
-			ORxG_ACS_DIV4			|\
-			ORxG_SCY_5_CLK			|\
-			ORxG_TRLX)
-
-
-/* FPGA configuration */
-#define CONFIG_SYS_PD_FIOX_PROG	(1 << (31- 5))	/* PD  5 */
-#define CONFIG_SYS_PD_FIOX_DONE	(1 << (31-28))	/* PD 28 */
-#define CONFIG_SYS_PD_FIOX_INIT	(1 << (31-29))	/* PD 29 */
-
-#define CONFIG_SYS_PD_FDOHM_PROG	(1 << (31- 4))	/* PD  4 */
-#define CONFIG_SYS_PD_FDOHM_DONE	(1 << (31-26))	/* PD 26 */
-#define CONFIG_SYS_PD_FDOHM_INIT	(1 << (31-27))	/* PD 27 */
-
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/SPD823TS.h b/include/configs/SPD823TS.h
index cffeb11..72ea217 100644
--- a/include/configs/SPD823TS.h
+++ b/include/configs/SPD823TS.h
@@ -303,6 +303,8 @@
  * IDE/ATA stuff
  *-----------------------------------------------------------------------
  */
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET	1	/* Use postreset IDE hook */
 #define CONFIG_IDE_8xx_DIRECT	1	/* PCMCIA interface required	*/
 #define CONFIG_IDE_LED		1	/* LED   for ide supported	*/
 #define CONFIG_IDE_RESET	1	/* reset for ide supported	*/
diff --git a/include/configs/SX1.h b/include/configs/SX1.h
deleted file mode 100644
index 93d031c..0000000
--- a/include/configs/SX1.h
+++ /dev/null
@@ -1,189 +0,0 @@
-/*
- * (C) Copyright 2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-#define CONFIG_ARM925T	1		/* This is an arm925t CPU	*/
-#define CONFIG_OMAP	1		/* in a TI OMAP core	*/
-#define CONFIG_OMAP1510 1		/* which is in a 1510 (helen) */
-#define CONFIG_OMAP_SX1 1		/*	a SX1 Board  */
-
-/* input clock of PLL */
-#define CONFIG_SYS_CLK_FREQ	12000000	/* the SX1 has 12MHz input clock */
-
-#define CONFIG_MISC_INIT_R
-
-#define CONFIG_CMDLINE_TAG	 1	/* enable passing of ATAGs	*/
-#define CONFIG_SETUP_MEMORY_TAGS 1
-#define CONFIG_INITRD_TAG	 1
-
-/*
- * Size of malloc() pool
- */
-#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
-
-/*
- * Hardware drivers
- */
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		(CONFIG_SYS_CLK_FREQ)	/* can be 12M/32Khz or 48Mhz  */
-#define CONFIG_SYS_NS16550_COM1	0xfffb0000		/* uart1, bluetooth uart on helen */
-
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1		1	/* we use SERIAL 1 on SX1 */
-
-/*
- * USB device configuration
- */
-#define CONFIG_USB_DEVICE	1
-#define CONFIG_USB_TTY		1
-
-#define CONFIG_USBD_VENDORID		0x1234
-#define CONFIG_USBD_PRODUCTID		0x5678
-#define CONFIG_USBD_MANUFACTURER	"Siemens"
-#define CONFIG_USBD_PRODUCT_NAME	"SX1"
-
-/*
- * I2C configuration
- */
-#define CONFIG_HARD_I2C
-#define CONFIG_SYS_I2C_SPEED		100000
-#define CONFIG_SYS_I2C_SLAVE		1
-#define CONFIG_DRIVER_OMAP1510_I2C
-
-#define CONFIG_ENV_OVERWRITE
-
-#define CONFIG_ENV_OVERWRITE
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_BAUDRATE		115200
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_I2C
-
-#undef CONFIG_CMD_NET
-
-
-#include <configs/omap1510.h>
-
-#define CONFIG_BOOTARGS		"mem=16M console=ttyS0,115200n8 root=/dev/mtdblock3 rw"
-#ifdef CONFIG_STDOUT_USBTTY
-#define CONFIG_PREBOOT		"setenv stdout usbtty;setenv stdin usbtty"
-#endif
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT		"SX1# " /* Monitor Command Prompt	*/
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x10000000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x12000000	/* 32 MB in DRAM	*/
-
-#define CONFIG_SYS_LOAD_ADDR		0x10000000	/* default load address */
-
-/* The 1510 has 3 timers, they can be driven by the RefClk (12MHz) or by DPLL1.
- * This time is further subdivided by a local divisor.
- */
-#define CONFIG_SYS_TIMERBASE	OMAP1510_TIMER1_BASE	/* use timer 1 */
-#define CONFIG_SYS_PTV		2	/* Divisor: 2^(PTV+1) => 8 */
-#define CONFIG_SYS_HZ		1000
-
-/*-----------------------------------------------------------------------
- * Physical Memory Map
- */
-#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
-#define PHYS_SDRAM_1		0x10000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE	0x02000000 /* 32 MB */
-
-#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2		0x04000000 /* Flash Bank #2 */
-
-#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- * V1
- * PHYS_FLASH_SIZE_1			(16 << 10)	16 MB
- * PHYS_FLASH_SIZE_2			(8 << 10)	 8 MB
- * V2 only 1 flash
- * PHYS_FLASH_SIZE_1			(32 << 10)	32 MB
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks */
-#define PHYS_FLASH_SECT_SIZE	(128*1024) /* Size of a sector (128kB) */
-#define CONFIG_SYS_MAX_FLASH_SECT	(256)	/* max number of sectors on one chip */
-#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + PHYS_FLASH_SECT_SIZE) /* addr of environment */
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE	/* Monitor at beginning of flash */
-#define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE	/* Reserve 1 sector */
-#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE, PHYS_FLASH_2 }
-
-/*-----------------------------------------------------------------------
- * FLASH driver setup
- */
-#define CONFIG_SYS_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER	1	/* Use drivers/mtd/cfi_flash.c */
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* Use buffered writes (~10x faster) */
-#define CONFIG_SYS_FLASH_PROTECTION	1	/* Use hardware sector protection */
-
-/* timeout values are in ticks */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	(20*CONFIG_SYS_HZ) /* Timeout for Flash Write */
-
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_SECT_SIZE	PHYS_FLASH_SECT_SIZE
-#define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE /* Total Size of Environment Sector */
-#define CONFIG_ENV_OFFSET	( CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN ) /* Environment after Monitor */
-
-/* Address and size of Redundant Environment Sector	*/
-#define CONFIG_ENV_SIZE_REDUND	0x20000
-#define CONFIG_ENV_OFFSET_REDUND	0x40000
-
-#endif	/* __CONFIG_H */
diff --git a/arch/arm/include/asm/arch-lpc2292/hardware.h b/include/configs/T4240QDS.h
similarity index 64%
copy from arch/arm/include/asm/arch-lpc2292/hardware.h
copy to include/configs/T4240QDS.h
index 5e227e3..76b3ca6 100644
--- a/arch/arm/include/asm/arch-lpc2292/hardware.h
+++ b/include/configs/T4240QDS.h
@@ -1,9 +1,5 @@
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
 /*
- * Copyright (c) 2004	Cucy Systems (http://www.cucy.com)
- * Curt Brune <curt@cucy.com>
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -15,7 +11,7 @@
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
@@ -24,10 +20,16 @@
  * MA 02111-1307 USA
  */
 
-#if defined(CONFIG_LPC2292)
-#include <asm/arch-lpc2292/lpc2292_registers.h>
-#else
-#error No hardware file defined for this configuration
-#endif
+/*
+ * T4240 QDS board configuration file
+ */
+#define CONFIG_T4240QDS
+#define CONFIG_PHYS_64BIT
+#define CONFIG_PPC_T4240
 
-#endif /* __ASM_ARCH_HARDWARE_H */
+#define CONFIG_FSL_SATA_V2
+#define CONFIG_PCIE4
+
+#define CONFIG_ICS307_REFCLK_HZ		25000000  /* ICS307 ref clk freq */
+
+#include "t4qds.h"
diff --git a/include/configs/TK885D.h b/include/configs/TK885D.h
index 4176c7f..623cb66 100644
--- a/include/configs/TK885D.h
+++ b/include/configs/TK885D.h
@@ -343,6 +343,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
diff --git a/include/configs/TQM823L.h b/include/configs/TQM823L.h
index a01b4a6..9fac5d1 100644
--- a/include/configs/TQM823L.h
+++ b/include/configs/TQM823L.h
@@ -335,6 +335,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/TQM823M.h b/include/configs/TQM823M.h
index 1da4acd..932f158 100644
--- a/include/configs/TQM823M.h
+++ b/include/configs/TQM823M.h
@@ -331,6 +331,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/TQM850L.h b/include/configs/TQM850L.h
index 1c054f0..eb08de2 100644
--- a/include/configs/TQM850L.h
+++ b/include/configs/TQM850L.h
@@ -320,6 +320,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/TQM850M.h b/include/configs/TQM850M.h
index 46066df..bf3a76c 100644
--- a/include/configs/TQM850M.h
+++ b/include/configs/TQM850M.h
@@ -322,6 +322,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/TQM855L.h b/include/configs/TQM855L.h
index dd2da94..43dd643 100644
--- a/include/configs/TQM855L.h
+++ b/include/configs/TQM855L.h
@@ -324,6 +324,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index 95bc4d9..e7fd2db 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -359,6 +359,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/TQM860L.h b/include/configs/TQM860L.h
index 487666c..81e1b91 100644
--- a/include/configs/TQM860L.h
+++ b/include/configs/TQM860L.h
@@ -323,6 +323,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/TQM860M.h b/include/configs/TQM860M.h
index e8b77ea..ed496a1 100644
--- a/include/configs/TQM860M.h
+++ b/include/configs/TQM860M.h
@@ -324,6 +324,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/TQM862L.h b/include/configs/TQM862L.h
index 334b7ec..1559336 100644
--- a/include/configs/TQM862L.h
+++ b/include/configs/TQM862L.h
@@ -327,6 +327,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/TQM862M.h b/include/configs/TQM862M.h
index 1e2ad40..61dcf62 100644
--- a/include/configs/TQM862M.h
+++ b/include/configs/TQM862M.h
@@ -328,6 +328,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
index a13c16a..7d0ae99 100644
--- a/include/configs/TQM866M.h
+++ b/include/configs/TQM866M.h
@@ -356,6 +356,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
diff --git a/include/configs/TQM885D.h b/include/configs/TQM885D.h
index 7df76fb..7941631 100644
--- a/include/configs/TQM885D.h
+++ b/include/configs/TQM885D.h
@@ -341,6 +341,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
diff --git a/include/configs/VCMA9.h b/include/configs/VCMA9.h
index 06adc94..fb7d922 100644
--- a/include/configs/VCMA9.h
+++ b/include/configs/VCMA9.h
@@ -124,6 +124,7 @@
 
 /* USB support (currently only works with D-cache off) */
 #define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_S3C24XX
 #define CONFIG_USB_KEYBOARD
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h
index 339d4bd..b6e48f8 100644
--- a/include/configs/am335x_evm.h
+++ b/include/configs/am335x_evm.h
@@ -29,6 +29,7 @@
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
 #define CONFIG_SYS_PROMPT		"U-Boot# "
+#define CONFIG_BOARD_LATE_INIT
 #define CONFIG_SYS_NO_FLASH
 #define MACH_TYPE_TIAM335EVM		3589	/* Until the next sync */
 #define CONFIG_MACH_TYPE		MACH_TYPE_TIAM335EVM
@@ -46,11 +47,14 @@
 
 /* set to negative value for no autoboot */
 #define CONFIG_BOOTDELAY		1
+#define CONFIG_ENV_VARS_UBOOT_CONFIG
+#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"loadaddr=0x80200000\0" \
 	"fdtaddr=0x80F80000\0" \
 	"rdaddr=0x81000000\0" \
 	"bootfile=/boot/uImage\0" \
+	"fdtfile=\0" \
 	"console=ttyO0,115200n8\0" \
 	"optargs=\0" \
 	"mmcdev=0\0" \
@@ -79,9 +83,16 @@
 	"ramboot=echo Booting from ramdisk ...; " \
 		"run ramargs; " \
 		"bootm ${loadaddr}\0" \
+	"findfdt="\
+		"if test $board_name = A335BONE; then " \
+			"setenv fdtfile am335x-bone.dtb; fi; " \
+		"if test $board_name = A33515BB; then " \
+			"setenv fdtfile am335x-evm.dtb; fi; " \
+		"if test $board_name = A335X_SK; then " \
+			"setenv fdtfile am335x-evmsk.dtb; fi\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"echo SD/MMC found on device ${mmcdev};" \
 		"if run loadbootenv; then " \
 			"echo Loaded environment from ${bootenv};" \
@@ -158,9 +169,15 @@
 /* NS16550 Configuration */
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SERIAL_MULTI
 #define CONFIG_SYS_NS16550_REG_SIZE	(-4)
 #define CONFIG_SYS_NS16550_CLK		(48000000)
 #define CONFIG_SYS_NS16550_COM1		0x44e09000	/* Base EVM has UART0 */
+#define CONFIG_SYS_NS16550_COM2		0x48022000	/* UART1 */
+#define CONFIG_SYS_NS16550_COM3		0x48024000	/* UART2 */
+#define CONFIG_SYS_NS16550_COM4		0x481a6000	/* UART3 */
+#define CONFIG_SYS_NS16550_COM5		0x481a8000	/* UART4 */
+#define CONFIG_SYS_NS16550_COM6		0x481aa000	/* UART5 */
 
 /* I2C Configuration */
 #define CONFIG_I2C
@@ -182,11 +199,7 @@
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 110, 300, 600, 1200, 2400, \
 4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 }
 
-/*
- * select serial console configuration
- */
-#define CONFIG_SERIAL1			1
-#define CONFIG_CONS_INDEX		1
+#define CONFIG_ENV_OVERWRITE		1
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 
 #define CONFIG_ENV_IS_NOWHERE
@@ -218,6 +231,13 @@
 #define CONFIG_SPL_NET_SUPPORT
 #define CONFIG_SPL_NET_VCI_STRING	"AM335x U-Boot SPL"
 #define CONFIG_SPL_ETH_SUPPORT
+#define CONFIG_SPL_SPI_SUPPORT
+#define CONFIG_SPL_SPI_FLASH_SUPPORT
+#define CONFIG_SPL_SPI_LOAD
+#define CONFIG_SPL_SPI_BUS		0
+#define CONFIG_SPL_SPI_CS		0
+#define CONFIG_SYS_SPI_U_BOOT_OFFS	0x20000
+#define CONFIG_SYS_SPI_U_BOOT_SIZE	0x40000
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/omap-common/u-boot-spl.lds"
 
 /*
diff --git a/include/configs/am3517_crane.h b/include/configs/am3517_crane.h
index 8ddeff4..20a3df5 100644
--- a/include/configs/am3517_crane.h
+++ b/include/configs/am3517_crane.h
@@ -209,7 +209,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/am3517_evm.h b/include/configs/am3517_evm.h
index 6980811..ce71d13 100644
--- a/include/configs/am3517_evm.h
+++ b/include/configs/am3517_evm.h
@@ -206,7 +206,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/apx4devkit.h b/include/configs/apx4devkit.h
index af0b714..6764b47 100644
--- a/include/configs/apx4devkit.h
+++ b/include/configs/apx4devkit.h
@@ -132,7 +132,7 @@
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_MMC_BOUNCE_BUFFER
+#define CONFIG_BOUNCE_BUFFER
 #define CONFIG_MXS_MMC
 #endif
 
diff --git a/include/configs/at91sam9x5ek.h b/include/configs/at91sam9x5ek.h
index cbdc3e9..71f765b 100644
--- a/include/configs/at91sam9x5ek.h
+++ b/include/configs/at91sam9x5ek.h
@@ -89,6 +89,7 @@
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_SF
+#define CONFIG_CMD_MMC
 
 /* SDRAM */
 #define CONFIG_NR_DRAM_BANKS		1
@@ -138,6 +139,15 @@
 #define CONFIG_CMD_UBIFS
 #endif
 
+/* MMC */
+#ifdef CONFIG_CMD_MMC
+#define CONFIG_MMC
+#define CONFIG_CMD_FAT
+#define CONFIG_GENERIC_MMC
+#define CONFIG_GENERIC_ATMEL_MCI
+#define CONFIG_DOS_PARTITION
+#endif
+
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
diff --git a/include/configs/atc.h b/include/configs/atc.h
index 75f950b9..538a167 100644
--- a/include/configs/atc.h
+++ b/include/configs/atc.h
@@ -482,6 +482,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h
index 5e3155d..6bd1397 100644
--- a/include/configs/atngw100.h
+++ b/include/configs/atngw100.h
@@ -130,7 +130,6 @@
 #define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
 #define CONFIG_ATMEL_SPI
 
 #define CONFIG_SPI_FLASH
diff --git a/include/configs/atngw100mkii.h b/include/configs/atngw100mkii.h
index f85374f..998cb97 100644
--- a/include/configs/atngw100mkii.h
+++ b/include/configs/atngw100mkii.h
@@ -154,7 +154,6 @@
 #define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
 #define CONFIG_ATMEL_SPI
 
 #define CONFIG_SPI_FLASH
diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h
index bb426f1..c6b129a 100644
--- a/include/configs/atstk1002.h
+++ b/include/configs/atstk1002.h
@@ -153,7 +153,6 @@
 #define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
 
 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h
index 817d943..67ff39b 100644
--- a/include/configs/atstk1003.h
+++ b/include/configs/atstk1003.h
@@ -137,7 +137,6 @@
 #define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
 
 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h
index 5134b7f..a1d593b 100644
--- a/include/configs/atstk1004.h
+++ b/include/configs/atstk1004.h
@@ -137,7 +137,6 @@
 #define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
 
 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h
index 29fdd12..280ecbc 100644
--- a/include/configs/atstk1006.h
+++ b/include/configs/atstk1006.h
@@ -153,7 +153,6 @@
 #define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
 
 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
diff --git a/include/configs/c2mon.h b/include/configs/c2mon.h
deleted file mode 100644
index 566c42b..0000000
--- a/include/configs/c2mon.h
+++ /dev/null
@@ -1,416 +0,0 @@
-/*
- * (C) Copyright 2001-2005
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * board/config.h - configuration options, board specific
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * High Level Configuration Options
- * (easy to change)
- */
-
-#define CONFIG_MPC855		1	/* This is a MPC855 CPU		*/
-#define CONFIG_C2MON		1	/* ...on a C2MON module		*/
-
-#define	CONFIG_SYS_TEXT_BASE	0x40000000
-
-#define CONFIG_80MHz		1	/* Running at 5 * 16 = 80 MHz	*/
-
-#define	CONFIG_8xx_CONS_SMC1	1	/* Console is on SMC1		*/
-#undef	CONFIG_8xx_CONS_SMC2
-#undef	CONFIG_8xx_CONS_NONE
-#define CONFIG_BAUDRATE		115200	/* console baudrate = 115kbps	*/
-#if 0
-#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
-#else
-#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
-#endif
-
-#define	CONFIG_CLOCKS_IN_MHZ	1	/* clocks passsed to Linux in MHz */
-
-#define CONFIG_PREBOOT	"echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo"
-
-#undef	CONFIG_BOOTARGS
-#define CONFIG_BOOTCOMMAND							\
-	"bootp; "								\
-	"setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} "	\
-	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}::off; "	\
-	"bootm"
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#undef	CONFIG_SYS_LOADS_BAUD_CHANGE		/* don't allow baudrate change	*/
-
-#undef	CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-#undef	CONFIG_STATUS_LED		/* Status LED disabled		*/
-
-#undef	CONFIG_CAN_DRIVER		/* CAN Driver support disabled	*/
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_SUBNETMASK
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_BOOTFILESIZE
-
-
-#define CONFIG_MAC_PARTITION
-#define CONFIG_DOS_PARTITION
-
-#define CONFIG_FEC_ENET		1	/* Use Fast Ethernet Controller	*/
-
-#define	CONFIG_RTC_MPC8xx		/* use internal RTC of MPC8xx	*/
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_DATE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_IDE
-#define CONFIG_CMD_NFS
-#define CONFIG_CMD_SNTP
-
-
-/*
- * Miscellaneous configurable options
- */
-#define	CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define	CONFIG_SYS_PROMPT		"=> "	/* Monitor Command Prompt	*/
-
-#undef	CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser	*/
-
-#if defined(CONFIG_CMD_KGDB)
-#define	CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size	*/
-#else
-#define	CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size	*/
-#endif
-#define	CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define	CONFIG_SYS_MAXARGS		16	/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-
-#define CONFIG_SYS_MEMTEST_START	0x0400000	/* memtest works on	*/
-#define CONFIG_SYS_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
-
-#define	CONFIG_SYS_LOAD_ADDR		0x100000	/* default load address	*/
-
-#define	CONFIG_SYS_HZ			1000	/* decrementer freq: 1 ms ticks	*/
-
-/*
- * Low Level Configuration Settings
- * (address mappings, register initial values, etc.)
- * You should know what you are doing if you make changes here.
- */
-/*-----------------------------------------------------------------------
- * Internal Memory Mapped Register
- */
-#define CONFIG_SYS_IMMR		0xFFF00000
-
-/*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
- */
-#define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_SYS_IMMR
-#define	CONFIG_SYS_INIT_RAM_SIZE	0x2F00	/* Size of used area in DPRAM	*/
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define	CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-/*-----------------------------------------------------------------------
- * Start addresses for the final memory configuration
- * (Set up by the startup code)
- * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
- */
-#define	CONFIG_SYS_SDRAM_BASE		0x00000000
-#define CONFIG_SYS_FLASH_BASE		0x40000000
-#if defined(DEBUG)
-#define	CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor	*/
-#else
-#define	CONFIG_SYS_MONITOR_LEN		(192 << 10)	/* Reserve 192 kB for Monitor	*/
-#endif
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_FLASH_BASE
-#define	CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc()	*/
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define	CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux	*/
-
-/*-----------------------------------------------------------------------
- * FLASH organization
- */
-#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of memory banks		*/
-#define CONFIG_SYS_MAX_FLASH_SECT	67	/* max number of sectors on one chip	*/
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
-#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
-
-#define	CONFIG_ENV_IS_IN_FLASH	1
-#define	CONFIG_ENV_OFFSET		0x8000	/*   Offset   of Environment Sector	*/
-#define	CONFIG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
-
-/*-----------------------------------------------------------------------
- * Cache Configuration
- */
-#define CONFIG_SYS_CACHELINE_SIZE	16	/* For all MPC8xx CPUs			*/
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CACHELINE_SHIFT	4	/* log base 2 of the above value	*/
-#endif
-
-/*-----------------------------------------------------------------------
- * SYPCR - System Protection Control				11-9
- * SYPCR can only be written once after reset!
- *-----------------------------------------------------------------------
- * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
- */
-#if defined(CONFIG_WATCHDOG)
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
-			 SYPCR_SWE  | SYPCR_SWRI| SYPCR_SWP)
-#else
-#define CONFIG_SYS_SYPCR	(SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
-#endif
-
-/*-----------------------------------------------------------------------
- * SIUMCR - SIU Module Configuration				11-6
- *-----------------------------------------------------------------------
- * PCMCIA config., multi-function pin tri-state
- */
-#ifndef	CONFIG_CAN_DRIVER
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-#else	/* we must activate GPL5 in the SIUMCR for CAN */
-#define CONFIG_SYS_SIUMCR	(SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
-#endif	/* CONFIG_CAN_DRIVER */
-
-/*-----------------------------------------------------------------------
- * TBSCR - Time Base Status and Control				11-26
- *-----------------------------------------------------------------------
- * Clear Reference Interrupt Status, Timebase freezing enabled
- */
-#define CONFIG_SYS_TBSCR	(TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
-
-/*-----------------------------------------------------------------------
- * RTCSC - Real-Time Clock Status and Control Register		11-27
- *-----------------------------------------------------------------------
- */
-#define CONFIG_SYS_RTCSC	(RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
-
-/*-----------------------------------------------------------------------
- * PISCR - Periodic Interrupt Status and Control		11-31
- *-----------------------------------------------------------------------
- * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
- */
-#define CONFIG_SYS_PISCR	(PISCR_PS | PISCR_PITF)
-
-/*-----------------------------------------------------------------------
- * PLPRCR - PLL, Low-Power, and Reset Control Register		15-30
- *-----------------------------------------------------------------------
- * Reset PLL lock status sticky bit, timer expired status bit and timer
- * interrupt status bit
- *
- * If this is a 80 MHz CPU, set PLL multiplication factor to 5 (5*16=80)!
- */
-#ifdef	CONFIG_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CONFIG_SYS_PLPRCR							\
-		( (5-1)<<PLPRCR_MF_SHIFT | PLPRCR_TEXPS | PLPRCR_TMIST )
-#else			/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_PLPRCR	(PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST)
-#endif	/* CONFIG_80MHz */
-
-/*-----------------------------------------------------------------------
- * SCCR - System Clock and reset Control Register		15-27
- *-----------------------------------------------------------------------
- * Set clock output, timebase and RTC source and divider,
- * power management and some other internal clocks
- */
-#define SCCR_MASK	SCCR_EBDF11
-#ifdef	CONFIG_80MHz	/* for 80 MHz, we use a 16 MHz clock * 5 */
-#define CONFIG_SYS_SCCR	(/* SCCR_TBS  | */ \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-#else			/* up to 50 MHz we use a 1:1 clock */
-#define CONFIG_SYS_SCCR	(SCCR_TBS     | \
-			 SCCR_COM00   | SCCR_DFSYNC00 | SCCR_DFBRG00  | \
-			 SCCR_DFNL000 | SCCR_DFNH000  | SCCR_DFLCD000 | \
-			 SCCR_DFALCD00)
-#endif	/* CONFIG_80MHz */
-
-/*-----------------------------------------------------------------------
- * PCMCIA stuff
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_PCMCIA_MEM_ADDR	(0xE0000000)
-#define CONFIG_SYS_PCMCIA_MEM_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_DMA_ADDR	(0xE4000000)
-#define CONFIG_SYS_PCMCIA_DMA_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_ATTRB_ADDR	(0xE8000000)
-#define CONFIG_SYS_PCMCIA_ATTRB_SIZE	( 64 << 20 )
-#define CONFIG_SYS_PCMCIA_IO_ADDR	(0xEC000000)
-#define CONFIG_SYS_PCMCIA_IO_SIZE	( 64 << 20 )
-
-/*-----------------------------------------------------------------------
- * PCMCIA Power Switch
- *
- * The C2MON uses a TPS2211A PC-Card Power-Interface Switch to
- * control the voltages on the PCMCIA slot which is connected
- * to Port C (all outputs) and Port B (Over-Current Input)
- *-----------------------------------------------------------------------
- */
-			/* Output pins */
-#define TPS2211_VCCD0	0x0002		/* PC.14 */
-#define TPS2211_VCCD1	0x0004		/* PC.13 */
-#define TPS2211_VPPD0	0x0008		/* PC.12 */
-#define TPS2211_VPPD1	0x0010		/* PC.11 */
-#define TPS2211_OUTPUTS ( TPS2211_VCCD0 | TPS2211_VCCD1 | \
-			  TPS2211_VPPD0 | TPS2211_VPPD1 )
-
-			/* Input pins */
-#define TPS2211_OC	0x00000200	/* PB.22: Over-Current		*/
-#define TPS2211_INPUTS	( TPS2211_OC )
-
-/*-----------------------------------------------------------------------
- * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
- *-----------------------------------------------------------------------
- */
-
-#define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
-
-#undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
-#undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
-#undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
-
-#define CONFIG_SYS_IDE_MAXBUS		1	/* max. 1 IDE bus		*/
-#define CONFIG_SYS_IDE_MAXDEVICE	1	/* max. 1 drive per IDE bus	*/
-
-#define CONFIG_SYS_ATA_IDE0_OFFSET	0x0000
-
-#define CONFIG_SYS_ATA_BASE_ADDR	CONFIG_SYS_PCMCIA_MEM_ADDR
-
-/* Offset for data I/O			*/
-#define CONFIG_SYS_ATA_DATA_OFFSET	(CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for normal register accesses	*/
-#define CONFIG_SYS_ATA_REG_OFFSET	(2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320)
-
-/* Offset for alternate registers	*/
-#define CONFIG_SYS_ATA_ALT_OFFSET	0x0100
-
-
-/*-----------------------------------------------------------------------
- *
- *-----------------------------------------------------------------------
- *
- */
-#define CONFIG_SYS_DER	0
-
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
- */
-
-#define FLASH_BASE0_PRELIM	0x40000000	/* FLASH bank #0	*/
-#define FLASH_BASE1_PRELIM	0x60000000	/* FLASH bank #0	*/
-
-/* used to re-map FLASH both when starting from SRAM or FLASH:
- * restrict access enough to keep SRAM working (if any)
- * but not too much to meddle with FLASH accesses
- */
-#define CONFIG_SYS_REMAP_OR_AM		0x80000000	/* OR addr mask */
-#define CONFIG_SYS_PRELIM_OR_AM	0xE0000000	/* OR addr mask */
-
-/* FLASH timing: ACS = 11, TRLX = 0, CSNT = 1, SCY = 5, EHTR = 1	*/
-#define CONFIG_SYS_OR_TIMING_FLASH	(OR_CSNT_SAM  | OR_ACS_DIV2 | OR_BI | \
-				 OR_SCY_5_CLK | OR_EHTR)
-
-#define CONFIG_SYS_OR0_REMAP	(CONFIG_SYS_REMAP_OR_AM  | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH)
-#define CONFIG_SYS_BR0_PRELIM	((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
-
-#define CONFIG_SYS_OR1_REMAP	CONFIG_SYS_OR0_REMAP
-#define CONFIG_SYS_OR1_PRELIM	CONFIG_SYS_OR0_PRELIM
-#define CONFIG_SYS_BR1_PRELIM	((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
-
-/*
- * BR2/3 and OR2/3 (SDRAM)
- *
- */
-#define SDRAM_BASE2_PRELIM	0x00000000	/* SDRAM bank #0	*/
-#define SDRAM_BASE3_PRELIM	0x20000000	/* SDRAM bank #1	*/
-#define	SDRAM_MAX_SIZE		0x04000000	/* max 64 MB per bank	*/
-
-/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care)	*/
-#define CONFIG_SYS_OR_TIMING_SDRAM	0x00000A00
-
-#define CONFIG_SYS_OR2_PRELIM	(CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM )
-#define CONFIG_SYS_BR2_PRELIM	((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-
-#ifndef	CONFIG_CAN_DRIVER
-#define	CONFIG_SYS_OR3_PRELIM	CONFIG_SYS_OR2_PRELIM
-#define CONFIG_SYS_BR3_PRELIM	((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
-#else	/* CAN uses CS3#, so we can have only one SDRAM bank anyway */
-#define	CONFIG_SYS_CAN_BASE		0xC0000000	/* CAN mapped at 0xC0000000	*/
-#define CONFIG_SYS_CAN_OR_AM		0xFFFF8000	/* 32 kB address mask		*/
-#define CONFIG_SYS_OR3_CAN		(CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI)
-#define CONFIG_SYS_BR3_CAN		((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \
-					BR_PS_8 | BR_MS_UPMB | BR_V )
-#endif	/* CONFIG_CAN_DRIVER */
-
-/*
- * Memory Periodic Timer Prescaler
- */
-
-/* periodic timer for refresh */
-#define CONFIG_SYS_MAMR_PTA	97		/* start with divider for 100 MHz	*/
-
-/* refresh rate 15.6 us (= 64 ms / 4K = 62.4 / quad bursts) for <= 128 MBit	*/
-#define CONFIG_SYS_MPTPR_2BK_4K	MPTPR_PTP_DIV16		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_4K	MPTPR_PTP_DIV32		/* setting for 1 bank	*/
-
-/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit		*/
-#define CONFIG_SYS_MPTPR_2BK_8K	MPTPR_PTP_DIV8		/* setting for 2 banks	*/
-#define CONFIG_SYS_MPTPR_1BK_8K	MPTPR_PTP_DIV16		/* setting for 1 bank	*/
-
-/*
- * MAMR settings for SDRAM
- */
-
-/* 8 column SDRAM */
-#define CONFIG_SYS_MAMR_8COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-/* 9 column SDRAM */
-#define CONFIG_SYS_MAMR_9COL	((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT)  | MAMR_PTAE	    |	\
-			 MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |	\
-			 MAMR_RLFA_1X	 | MAMR_WLFA_1X	   | MAMR_TLFA_4X)
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/ca9x4_ct_vxp.h b/include/configs/ca9x4_ct_vxp.h
index 312fd94..a7cd1d4 100644
--- a/include/configs/ca9x4_ct_vxp.h
+++ b/include/configs/ca9x4_ct_vxp.h
@@ -163,6 +163,8 @@
 /* Room required on the stack for the environment data */
 #define CONFIG_ENV_SIZE			FLASH_MAX_SECTOR_SIZE
 
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
+
 /*
  * Amount of flash used for environment:
  * We don't know which end has the small erase blocks so we use the penultimate
diff --git a/include/configs/cm_t35.h b/include/configs/cm_t35.h
index 46c556d..568ae8e 100644
--- a/include/configs/cm_t35.h
+++ b/include/configs/cm_t35.h
@@ -231,7 +231,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
@@ -289,25 +289,15 @@
  */
 
 /* **** PISMO SUPPORT *** */
-
 /* Configure the PISMO */
 #define PISMO1_NAND_SIZE		GPMC_SIZE_128M
-#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
-
-#if defined(CONFIG_CMD_NAND)
-#define CONFIG_SYS_FLASH_BASE		PISMO1_NAND_BASE
-#endif
 
 /* Monitor at start of flash */
 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */
 
 #define CONFIG_ENV_IS_IN_NAND
-#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
 #define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */
-
 #define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
 #define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET
 
diff --git a/include/configs/colibri_t20_iris.h b/include/configs/colibri_t20_iris.h
new file mode 100644
index 0000000..0e5f281
--- /dev/null
+++ b/include/configs/colibri_t20_iris.h
@@ -0,0 +1,83 @@
+/*
+ *  Copyright (C) 2012 Lucas Stach
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tegra20-common.h"
+
+/* Enable FDT support */
+#define CONFIG_DEFAULT_DEVICE_TREE	tegra20-colibri_t20_iris
+#define CONFIG_OF_CONTROL
+#define CONFIG_OF_SEPARATE
+
+/* High-level configuration options */
+#define V_PROMPT                   "Tegra20 (Colibri) # "
+#define CONFIG_TEGRA_BOARD_STRING  "Toradex Colibri T20 on Iris"
+
+/* Board-specific serial config */
+#define CONFIG_TEGRA_ENABLE_UARTA
+#define CONFIG_TEGRA_UARTA_SDIO1
+#define CONFIG_SYS_NS16550_COM1    NV_PA_APB_UARTA_BASE
+
+#define CONFIG_BOARD_EARLY_INIT_F
+
+/* SD/MMC support */
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_TEGRA_MMC
+#define CONFIG_CMD_MMC
+
+/* File system support */
+#define CONFIG_DOS_PARTITION
+#define CONFIG_EFI_PARTITION
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+
+/* USB host support */
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
+#define CONFIG_CMD_USB
+
+/* USB networking support */
+#define CONFIG_USB_HOST_ETHER
+#define CONFIG_USB_ETHER_ASIX
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PING
+
+/* NAND support */
+#define CONFIG_CMD_NAND
+#define CONFIG_TEGRA_NAND
+#define CONFIG_SYS_MAX_NAND_DEVICE     1
+
+/* Environment in NAND, 64K is a bit excessive but erase block is 512K anyway */
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_OFFSET              (SZ_2M)
+#undef  CONFIG_ENV_SIZE /* undef size from tegra20-common.h */
+#define CONFIG_ENV_SIZE                (SZ_64K)
+
+/* Debug commands */
+#define CONFIG_CMD_BDI
+#define CONFIG_CMD_CACHE
+
+#include "tegra-common-post.h"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h
index 0e89242..cc95e2b 100644
--- a/include/configs/coreboot.h
+++ b/include/configs/coreboot.h
@@ -45,6 +45,28 @@
 #undef CONFIG_WATCHDOG
 #undef CONFIG_HW_WATCHDOG
 
+/* SATA AHCI storage */
+
+#define CONFIG_SCSI_AHCI
+
+#ifdef CONFIG_SCSI_AHCI
+#define CONFIG_SYS_64BIT_LBA
+#define CONFIG_SATA_INTEL		1
+#define CONFIG_SCSI_DEV_LIST		{PCI_VENDOR_ID_INTEL, \
+			PCI_DEVICE_ID_INTEL_NM10_AHCI},	      \
+	{PCI_VENDOR_ID_INTEL,		\
+			PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_MOBILE}, \
+	{PCI_VENDOR_ID_INTEL, \
+			PCI_DEVICE_ID_INTEL_COUGARPOINT_AHCI_SERIES6}, \
+	{PCI_VENDOR_ID_INTEL,		\
+			PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
+
+#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
+#define CONFIG_SYS_SCSI_MAX_LUN		1
+#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
+					 CONFIG_SYS_SCSI_MAX_LUN)
+#endif
+
 /*-----------------------------------------------------------------------
  * Real Time Clock Configuration
  */
@@ -92,6 +114,9 @@
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION		/* Experimental */
 
+#define CONFIG_CMD_CBFS
+#define CONFIG_CMD_EXT4
+#define CONFIG_CMD_EXT4_WRITE
 
 /*-----------------------------------------------------------------------
  * Video Configuration
diff --git a/include/configs/corenet_ds.h b/include/configs/corenet_ds.h
index 8489d16..c41b039 100644
--- a/include/configs/corenet_ds.h
+++ b/include/configs/corenet_ds.h
@@ -76,10 +76,6 @@
 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 
-#define CONFIG_SYS_SRIO
-#define CONFIG_SRIO1			/* SRIO port 1 */
-#define CONFIG_SRIO2			/* SRIO port 2 */
-
 #define CONFIG_FSL_LAW			/* Use common FSL init code */
 
 #define CONFIG_ENV_OVERWRITE
diff --git a/include/configs/devkit8000.h b/include/configs/devkit8000.h
index 1e65806..da3263f 100644
--- a/include/configs/devkit8000.h
+++ b/include/configs/devkit8000.h
@@ -233,7 +233,7 @@
 		"dhcp ${loadaddr}; " \
 		"run netargs; " \
 		"bootm ${loadaddr}\0" \
-	"autoboot=if mmc rescan ${mmcdev}; then " \
+	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
 			"if run loadbootscript; then " \
 				"run bootscript; " \
 			"else " \
diff --git a/include/configs/eb_cpux9k2.h b/include/configs/eb_cpux9k2.h
index 9371ec3..3be4929 100644
--- a/include/configs/eb_cpux9k2.h
+++ b/include/configs/eb_cpux9k2.h
@@ -43,6 +43,10 @@
 
 #define MACH_TYPE_EB_CPUX9K2		1977
 #define CONFIG_MACH_TYPE		MACH_TYPE_EB_CPUX9K2
+
+#define CONFIG_SYS_CACHELINE_SIZE	32
+#define CONFIG_SYS_DCACHE_OFF
+
 /*--------------------------------------------------------------------------*/
 #ifndef CONFIG_RAMBOOT
 #define CONFIG_SYS_TEXT_BASE		0x00000000
@@ -56,7 +60,6 @@
 #define CONFIG_SYS_U_BOOT_BASE		PHYS_FLASH_1
 #define CONFIG_SYS_U_BOOT_SIZE		0x60000 /* 384 KBytes */
 
-
 #define CONFIG_BOOT_RETRY_TIME		30
 #define CONFIG_CMDLINE_EDITING
 
diff --git a/include/configs/eco5pk.h b/include/configs/eco5pk.h
new file mode 100644
index 0000000..b9ebf6a
--- /dev/null
+++ b/include/configs/eco5pk.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2012 8D Technologies inc.
+ * Based on mt_ventoux.h, original banner below:
+ *
+ * Copyright (C) 2011
+ * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
+ *
+ * Copyright (C) 2009 TechNexion Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include "tam3517-common.h"
+
+#undef CONFIG_USB_EHCI
+#undef CONFIG_USB_EHCI_OMAP
+#undef CONFIG_USB_OMAP3
+#undef CONFIG_CMD_USB
+
+/* Our console port is port3 */
+#undef CONFIG_CONS_INDEX
+#undef CONFIG_SYS_NS16550_COM1
+#undef CONFIG_SERIAL1
+
+#define CONFIG_CONS_INDEX	3
+#define CONFIG_SYS_NS16550_COM3	OMAP34XX_UART3
+#define CONFIG_SERIAL3
+
+#define MACH_TYPE_ECO5_PK	4017
+#define CONFIG_MACH_TYPE	MACH_TYPE_ECO5_PK
+
+#define CONFIG_BOOTDELAY	10
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_AUTO_COMPLETE
+
+/*
+ * Miscellaneous configurable options
+ */
+#define V_PROMPT		"ECO5-PK # "
+#define CONFIG_SYS_PROMPT	V_PROMPT
+
+/*
+ * Set its own mtdparts, different from common
+ */
+#undef MTDIDS_DEFAULT
+#undef MTDPARTS_DEFAULT
+#define MTDIDS_DEFAULT		"nand0=omap2-nand.0"
+#define MTDPARTS_DEFAULT	"mtdparts=omap2-nand.0:512k(xloader-nand)," \
+				"1024k(uboot-nand),256k(params-nand)," \
+				"5120k(kernel),-(ubifs)"
+
+/*
+ * The arithmetic in tam3517.h is wrong for us and the kernel gets overwritten.
+ */
+#undef CONFIG_ENV_OFFSET_REDUND
+#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + \
+						CONFIG_SYS_ENV_SECT_SIZE)
+
+#define	CONFIG_EXTRA_ENV_SETTINGS	CONFIG_TAM3517_SETTINGS \
+	"install_kernel=if dhcp $bootfile; then nand erase kernel;" \
+				"nand write $fileaddr kernel; fi\0" \
+	"mtdparts="MTDPARTS_DEFAULT"\0" \
+	"serverip=192.168.142.60\0"
+
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/favr-32-ezkit.h b/include/configs/favr-32-ezkit.h
index 71d2473..1c8da9f 100644
--- a/include/configs/favr-32-ezkit.h
+++ b/include/configs/favr-32-ezkit.h
@@ -152,7 +152,6 @@
 #define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
 
 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
diff --git a/include/configs/h2200.h b/include/configs/h2200.h
new file mode 100644
index 0000000..ef14dd3
--- /dev/null
+++ b/include/configs/h2200.h
@@ -0,0 +1,157 @@
+/*
+ * iPAQ h2200 board configuration
+ *
+ * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define MACH_TYPE_H2200			341
+#define CONFIG_MACH_TYPE		MACH_TYPE_H2200
+
+#define CONFIG_CPU_PXA25X		1
+#define CONFIG_BOARD_H2200
+
+#define CONFIG_SYS_NO_FLASH
+
+#define CONFIG_SYS_HZ			1000
+
+#define CONFIG_NR_DRAM_BANKS		1
+#define PHYS_SDRAM_1			0xa0000000 /* SDRAM Bank #1 */
+#define PHYS_SDRAM_1_SIZE		0x04000000 /* 64 MB */
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_SDRAM_SIZE		PHYS_SDRAM_1_SIZE
+
+#define CONFIG_SYS_INIT_SP_ADDR		0xfffff800
+
+#define CONFIG_ENV_SIZE			0x00040000
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128*1024)
+
+#define CONFIG_ENV_IS_NOWHERE
+#define CONFIG_SYS_MAXARGS		16
+#define CONFIG_SYS_LOAD_ADDR		0xa3000000 /* default load address */
+
+/*
+ * iPAQ 1st stage bootloader loads 2nd stage bootloader
+ * at address 0xa0040000 but bootloader requires header
+ * which is 0x1000 long.
+ *
+ * --- Header begin ---
+ *	.word 0xea0003fe ; b 0x1000
+ *
+ *	.org 0x40
+ *	.ascii "ECEC"
+ *
+ *	.org 0x1000
+ * --- Header end ---
+ */
+
+#define CONFIG_SYS_TEXT_BASE		0xa0041000
+
+/*
+ * Static chips
+ */
+
+#define CONFIG_SYS_MSC0_VAL		0x246c7ffc
+#define CONFIG_SYS_MSC1_VAL		0x7ff07ff0
+#define CONFIG_SYS_MSC2_VAL		0x7ff07ff0
+
+/*
+ * PCMCIA and CF Interfaces
+ */
+
+#define CONFIG_SYS_MECR_VAL		0x00000000
+#define CONFIG_SYS_MCMEM0_VAL		0x00000000
+#define CONFIG_SYS_MCMEM1_VAL		0x00000000
+#define CONFIG_SYS_MCATT0_VAL		0x00000000
+#define CONFIG_SYS_MCATT1_VAL		0x00000000
+#define CONFIG_SYS_MCIO0_VAL		0x00000000
+#define CONFIG_SYS_MCIO1_VAL		0x00000000
+
+#define CONFIG_SYS_FLYCNFG_VAL		0x00000000
+#define CONFIG_SYS_SXCNFG_VAL		0x00040004
+
+#define CONFIG_SYS_MDREFR_VAL		0x0099E018
+#define CONFIG_SYS_MDCNFG_VAL		0x01C801CB
+#define CONFIG_SYS_MDMRS_VAL		0x00220022
+
+#define CONFIG_SYS_PSSR_VAL		0x00000000
+#define CONFIG_SYS_CKEN			0x00004840
+#define CONFIG_SYS_CCCR			0x00000161
+
+/*
+ * GPIOs
+ */
+
+#define CONFIG_SYS_GPSR0_VAL		0x01000000
+#define CONFIG_SYS_GPSR1_VAL		0x00000000
+#define CONFIG_SYS_GPSR2_VAL		0x00010000
+
+#define CONFIG_SYS_GPCR0_VAL		0x00000000
+#define CONFIG_SYS_GPCR1_VAL		0x00000000
+#define CONFIG_SYS_GPCR2_VAL		0x00000000
+
+#define CONFIG_SYS_GPDR0_VAL		0xF7E38C00
+#define CONFIG_SYS_GPDR1_VAL		0xBCFFBF83
+#define CONFIG_SYS_GPDR2_VAL		0x000157FF
+
+#define CONFIG_SYS_GAFR0_L_VAL		0x80401000
+#define CONFIG_SYS_GAFR0_U_VAL		0x00000112
+#define CONFIG_SYS_GAFR1_L_VAL		0x600A9550
+#define CONFIG_SYS_GAFR1_U_VAL		0x0005AAAA
+#define CONFIG_SYS_GAFR2_L_VAL		0x20000000
+#define CONFIG_SYS_GAFR2_U_VAL		0x00000000
+
+/*
+ * Serial port
+ */
+
+#define CONFIG_PXA_SERIAL
+#define CONFIG_FFUART
+#define CONFIG_CONS_INDEX		3
+
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 38400, 115200 }
+
+#define CONFIG_CMD_IMPORTENV		1
+#define CONFIG_CMD_LOADB
+#define CONFIG_CMD_SOURCE
+#define CONFIG_CMD_RUN
+#define CONFIG_CMD_IMI
+
+#define CONFIG_FIT
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_CMDLINE_TAG
+#define CONFIG_INITRD_TAG
+
+/* Monitor Command Prompt */
+#define CONFIG_SYS_PROMPT		"> "
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"$ "
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256
+
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+					sizeof(CONFIG_SYS_PROMPT) + 16)
+
+#define CONFIG_BOOTARGS "root=/dev/ram0 ro console=ttyS0,115200n8"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/hammerhead.h b/include/configs/hammerhead.h
index 532feb2..5570bdb 100644
--- a/include/configs/hammerhead.h
+++ b/include/configs/hammerhead.h
@@ -126,7 +126,6 @@
 #define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
 
 #define CONFIG_SYS_DCACHE_LINESZ		32
 #define CONFIG_SYS_ICACHE_LINESZ		32
diff --git a/include/configs/harmony.h b/include/configs/harmony.h
index d582ae1..040bfe4 100644
--- a/include/configs/harmony.h
+++ b/include/configs/harmony.h
@@ -72,8 +72,11 @@
 #define CONFIG_ENV_OFFSET	(SZ_512M - SZ_128K) /* 128K sector size */
 
 /* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
+#define CONFIG_USB_ULPI
+#define CONFIG_USB_ULPI_VIEWPORT
 #define CONFIG_USB_STORAGE
 #define CONFIG_CMD_USB
 
diff --git a/include/configs/igep00x0.h b/include/configs/igep00x0.h
index b1071e8..c81ab76 100644
--- a/include/configs/igep00x0.h
+++ b/include/configs/igep00x0.h
@@ -180,7 +180,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"echo SD/MMC found on device ${mmcdev};" \
 		"if run loadbootenv; then " \
 			"run importbootenv;" \
diff --git a/include/configs/km/km8309-common.h b/include/configs/km/km8309-common.h
new file mode 100644
index 0000000..b36e892
--- /dev/null
+++ b/include/configs/km/km8309-common.h
@@ -0,0 +1,176 @@
+/*
+ * Copyright (C) 2012 Keymile AG
+ *                    Gerlando Falauto <gerlando.falauto@keymile.com>
+ *
+ * Based on km8321-common.h, see respective copyright notice for credits
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+#ifndef __CONFIG_KM8309_COMMON_H
+#define __CONFIG_KM8309_COMMON_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1	/* E300 family */
+#define CONFIG_QE		1	/* Has QE */
+#define CONFIG_MPC83xx		1	/* MPC83xx family */
+#define CONFIG_MPC830x		1	/* MPC830x family */
+#define CONFIG_MPC8309		1	/* MPC8309 CPU specific */
+
+#define CONFIG_KM_DEF_ARCH	"arch=ppc_8xx\0"
+#define CONFIG_CMD_DIAG		1
+
+/* include common defines/options for all 83xx Keymile boards */
+#include "km83xx-common.h"
+
+/* QE microcode/firmware address */
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+/* at end of uboot partition, before env */
+#define CONFIG_SYS_QE_FMAN_FW_ADDR   0xF00B0000
+
+#define CONFIG_MISC_INIT_R
+
+/*
+ * System IO Config
+ */
+/* 0x14000180 SICR_1 */
+#define CONFIG_SYS_SICRL (0			\
+		| SICR_1_UART1_UART1RTS		\
+		| SICR_1_I2C_CKSTOP		\
+		| SICR_1_IRQ_A_IRQ		\
+		| SICR_1_IRQ_B_IRQ		\
+		| SICR_1_GPIO_A_GPIO		\
+		| SICR_1_GPIO_B_GPIO		\
+		| SICR_1_GPIO_C_GPIO		\
+		| SICR_1_GPIO_D_GPIO		\
+		| SICR_1_GPIO_E_GPIO		\
+		| SICR_1_GPIO_F_GPIO		\
+		| SICR_1_USB_A_UART2S		\
+		| SICR_1_USB_B_UART2RTS		\
+		| SICR_1_FEC1_FEC1		\
+		| SICR_1_FEC2_FEC2		\
+		)
+
+/* 0x00080400 SICR_2 */
+#define CONFIG_SYS_SICRH (0			\
+		| SICR_2_FEC3_FEC3		\
+		| SICR_2_HDLC1_A_HDLC1		\
+		| SICR_2_ELBC_A_LA		\
+		| SICR_2_ELBC_B_LCLK		\
+		| SICR_2_HDLC2_A_HDLC2		\
+		| SICR_2_USB_D_GPIO		\
+		| SICR_2_PCI_PCI		\
+		| SICR_2_HDLC1_B_HDLC1		\
+		| SICR_2_HDLC1_C_HDLC1		\
+		| SICR_2_HDLC2_B_GPIO		\
+		| SICR_2_HDLC2_C_HDLC2		\
+		| SICR_2_QUIESCE_B		\
+		)
+
+/* GPR_1 */
+#define CONFIG_SYS_GPR1  0x50008060
+
+#define CONFIG_SYS_GP1DIR 0x00000000
+#define CONFIG_SYS_GP1ODR 0x00000000
+#define CONFIG_SYS_GP2DIR 0xFF000000
+#define CONFIG_SYS_GP2ODR 0x00000000
+
+/*
+ * Hardware Reset Configuration Word
+ */
+#define CONFIG_SYS_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 | \
+	HRCWL_DDR_TO_SCB_CLK_2X1 | \
+	HRCWL_CSB_TO_CLKIN_2X1 | \
+	HRCWL_CORE_TO_CSB_2X1 | \
+	HRCWL_CE_PLL_VCO_DIV_2 | \
+	HRCWL_CE_TO_PLL_1X3)
+
+#define CONFIG_SYS_HRCW_HIGH (\
+	HRCWH_PCI_AGENT | \
+	HRCWH_PCI_ARBITER_DISABLE | \
+	HRCWH_CORE_ENABLE | \
+	HRCWH_FROM_0X00000100 | \
+	HRCWH_BOOTSEQ_DISABLE | \
+	HRCWH_SW_WATCHDOG_DISABLE | \
+	HRCWH_ROM_LOC_LOCAL_16BIT | \
+	HRCWH_BIG_ENDIAN | \
+	HRCWH_LALE_NORMAL)
+
+#define CONFIG_SYS_DDR_CS0_BNDS		0x0000007f
+#define CONFIG_SYS_DDR_SDRAM_CFG	(SDRAM_CFG_SDRAM_TYPE_DDR2 | \
+					 SDRAM_CFG_32_BE | \
+					 SDRAM_CFG_SREN | \
+					 SDRAM_CFG_HSE)
+
+#define CONFIG_SYS_DDR_SDRAM_CFG2	0x00401000
+#define CONFIG_SYS_DDR_CLK_CNTL		(DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05)
+#define CONFIG_SYS_DDR_INTERVAL	((0x064 << SDRAM_INTERVAL_BSTOPRE_SHIFT) | \
+				 (0x200 << SDRAM_INTERVAL_REFINT_SHIFT))
+
+#define CONFIG_SYS_DDR_CS0_CONFIG	(CSCONFIG_EN | CSCONFIG_AP | \
+					 CSCONFIG_ODT_RD_NEVER | \
+					 CSCONFIG_ODT_WR_ONLY_CURRENT | \
+					 CSCONFIG_ROW_BIT_13 | \
+					 CSCONFIG_COL_BIT_10)
+
+#define CONFIG_SYS_DDR_MODE	0x47860242
+#define CONFIG_SYS_DDR_MODE2	0x8080c000
+
+#define CONFIG_SYS_DDR_TIMING_0	((2 << TIMING_CFG0_MRS_CYC_SHIFT) | \
+				 (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
+				 (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) | \
+				 (2 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) | \
+				 (0 << TIMING_CFG0_WWT_SHIFT) | \
+				 (0 << TIMING_CFG0_RRT_SHIFT) | \
+				 (0 << TIMING_CFG0_WRT_SHIFT) | \
+				 (0 << TIMING_CFG0_RWT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_1	((TIMING_CFG1_CASLAT_40) | \
+				 (2 << TIMING_CFG1_WRTORD_SHIFT) | \
+				 (2 << TIMING_CFG1_ACTTOACT_SHIFT) | \
+				 (3 << TIMING_CFG1_WRREC_SHIFT) | \
+				 (7 << TIMING_CFG1_REFREC_SHIFT) | \
+				 (3 << TIMING_CFG1_ACTTORW_SHIFT) | \
+				 (7 << TIMING_CFG1_ACTTOPRE_SHIFT) | \
+				 (3 << TIMING_CFG1_PRETOACT_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_2	((8 << TIMING_CFG2_FOUR_ACT_SHIFT) | \
+				 (3 << TIMING_CFG2_CKE_PLS_SHIFT) | \
+				 (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) | \
+				 (2 << TIMING_CFG2_RD_TO_PRE_SHIFT) | \
+				 (3 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) | \
+				 (0 << TIMING_CFG2_ADD_LAT_SHIFT) | \
+				 (5 << TIMING_CFG2_CPO_SHIFT))
+
+#define CONFIG_SYS_DDR_TIMING_3	0x00000000
+
+#define CONFIG_SYS_KMBEC_FPGA_BASE	0xE8000000
+#define CONFIG_SYS_KMBEC_FPGA_SIZE	128
+
+/* EEprom support */
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+
+/*
+ * Local Bus Configuration & Clock Setup
+ */
+#define CONFIG_SYS_LCRR_DBYP	0x80000000
+#define CONFIG_SYS_LCRR_EADC	0x00010000
+#define CONFIG_SYS_LCRR_CLKDIV	0x00000002
+
+#define CONFIG_SYS_LBC_LBCR	0x00000000
+
+/*
+ * MMU Setup
+ */
+#define CONFIG_SYS_IBAT7L	(0)
+#define CONFIG_SYS_IBAT7U	(0)
+#define CONFIG_SYS_DBAT7L	CONFIG_SYS_IBAT7L
+#define CONFIG_SYS_DBAT7U	CONFIG_SYS_IBAT7U
+
+#endif /* __CONFIG_KM8309_COMMON_H */
diff --git a/include/configs/km/km8321-common.h b/include/configs/km/km8321-common.h
index 580b72f..8ad6fc3 100644
--- a/include/configs/km/km8321-common.h
+++ b/include/configs/km/km8321-common.h
@@ -115,7 +115,7 @@
 #define CONFIG_SYS_DDR_TIMING_3	0x00000000
 
 #define CONFIG_SYS_KMBEC_FPGA_BASE	0xE8000000
-#define	CONFIG_SYS_KMBEC_FPGA_SIZE	128
+#define CONFIG_SYS_KMBEC_FPGA_SIZE	128
 
 /* EEprom support */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
diff --git a/include/configs/km/km83xx-common.h b/include/configs/km/km83xx-common.h
index 877d841..a9823d6 100644
--- a/include/configs/km/km83xx-common.h
+++ b/include/configs/km/km83xx-common.h
@@ -169,9 +169,15 @@
 #define UEC_VERBOSE_DEBUG	1
 
 #ifdef CONFIG_UEC_ETH1
+#if defined(CONFIG_MPC8309)
+#define CONFIG_SYS_UEC1_UCC_NUM	2	/* UCC3 */
+#define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE /* not used in RMII Mode */
+#define CONFIG_SYS_UEC1_TX_CLK		QE_CLK12
+#else
 #define CONFIG_SYS_UEC1_UCC_NUM	3	/* UCC4 */
 #define CONFIG_SYS_UEC1_RX_CLK		QE_CLK_NONE /* not used in RMII Mode */
 #define CONFIG_SYS_UEC1_TX_CLK		QE_CLK17
+#endif
 #define CONFIG_SYS_UEC1_ETH_TYPE	FAST_ETH
 #define CONFIG_SYS_UEC1_PHY_ADDR	0
 #define CONFIG_SYS_UEC1_INTERFACE_TYPE	PHY_INTERFACE_MODE_RMII
diff --git a/include/configs/kzm9g.h b/include/configs/kzm9g.h
index 3a882e3..4898fb6 100644
--- a/include/configs/kzm9g.h
+++ b/include/configs/kzm9g.h
@@ -154,16 +154,20 @@
 /* I2C */
 #define CONFIG_CMD_I2C
 #define CONFIG_SH_I2C 1
+#define CONFIG_SH_I2C_8BIT
 #define CONFIG_HARD_I2C
 #define CONFIG_I2C_MULTI_BUS
-#define CONFIG_SYS_MAX_I2C_BUS  (2)
+#define CONFIG_SYS_MAX_I2C_BUS  (5)
 #define CONFIG_SYS_I2C_MODULE
 #define CONFIG_SYS_I2C_SPEED    (100000) /* 100 kHz */
 #define CONFIG_SYS_I2C_SLAVE    (0x7F)
 #define CONFIG_SH_I2C_DATA_HIGH (4)
 #define CONFIG_SH_I2C_DATA_LOW  (5)
-#define CONFIG_SH_I2C_CLOCK     (41666666)
+#define CONFIG_SH_I2C_CLOCK     (104000000) /* 104 MHz */
 #define CONFIG_SH_I2C_BASE0     (0xE6820000)
 #define CONFIG_SH_I2C_BASE1     (0xE6822000)
+#define CONFIG_SH_I2C_BASE2     (0xE6824000)
+#define CONFIG_SH_I2C_BASE3     (0xE6826000)
+#define CONFIG_SH_I2C_BASE4     (0xE6828000)
 
 #endif /* __KZM9G_H */
diff --git a/include/configs/lubbock.h b/include/configs/lubbock.h
index ed64960..5886a15 100644
--- a/include/configs/lubbock.h
+++ b/include/configs/lubbock.h
@@ -130,7 +130,8 @@
 #define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */
 
 #ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
 #define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE		0xF0000000
 #endif
diff --git a/include/configs/lwmon.h b/include/configs/lwmon.h
index ab86053..df49781 100644
--- a/include/configs/lwmon.h
+++ b/include/configs/lwmon.h
@@ -494,6 +494,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
diff --git a/include/configs/m28evk.h b/include/configs/m28evk.h
index bdbb820..b49ec8c 100644
--- a/include/configs/m28evk.h
+++ b/include/configs/m28evk.h
@@ -135,7 +135,7 @@
  */
 #ifdef	CONFIG_CMD_MMC
 #define	CONFIG_MMC
-#define	CONFIG_MMC_BOUNCE_BUFFER
+#define	CONFIG_BOUNCE_BUFFER
 #define	CONFIG_GENERIC_MMC
 #define	CONFIG_MXS_MMC
 #endif
diff --git a/include/configs/mcx.h b/include/configs/mcx.h
index 359522a..bf49cc1 100644
--- a/include/configs/mcx.h
+++ b/include/configs/mcx.h
@@ -115,8 +115,7 @@
 #define CONFIG_USB_ULPI
 #define CONFIG_USB_ULPI_VIEWPORT_OMAP
 /*#define CONFIG_EHCI_DCACHE*/ /* leave it disabled for now */
-#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	154
-#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO	152
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO	57
 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 
 /* commands to include */
@@ -182,7 +181,7 @@
 #define CONFIG_JFFS2_PART_SIZE		0xf980000	/* sz of jffs2 part */
 
 /* Environment information */
-#define CONFIG_BOOTDELAY	10
+#define CONFIG_BOOTDELAY	3
 
 #define CONFIG_BOOTFILE		"uImage"
 
@@ -256,22 +255,28 @@
 		"run nandargs; "					\
 		"ubi part nand0,4;"					\
 		"ubi readvol ${loadaddr} kernel;"			\
-		"run addip addtty addmtd addfb addeth addmisc;"		\
+		"run addtty addmtd addfb addeth addmisc;"		\
 		"bootm ${loadaddr}\0"					\
-	"swupdate_args=setenv bootargs ubi.mtd=6 root=ubi0:fs_recovery "\
-		"rootfstype=ubifs quiet loglevel=1 "			\
-			"consoleblank=0 ${swupdate_misc}\0"		\
+	"preboot=ubi part nand0,7;"					\
+		"ubi readvol ${loadaddr} splash;"			\
+		"bmp display ${loadaddr};"				\
+		"gpio set 55\0"						\
+	"swupdate_args=setenv bootargs root=/dev/ram "			\
+		"quiet loglevel=1 "					\
+		"consoleblank=0 ${swupdate_misc}\0"			\
 	"swupdate=echo Running Sw-Update...;"				\
 		"if printenv mtdparts;then echo Starting SwUpdate...; "	\
 		"else mtdparts default;fi; "				\
 		"ubi part nand0,5;"					\
 		"ubi readvol 0x82000000 kernel_recovery;"		\
+		"ubi part nand0,6;"					\
+		"ubi readvol 0x84000000 fs_recovery;"			\
 		"run swupdate_args; "					\
 		"setenv bootargs ${bootargs} "				\
 			"${mtdparts} "					\
 			"vram=6M omapfb.vram=1:2M,2:2M,3:2M "		\
 			"omapdss.def_disp=lcd;"				\
-		"bootm ${loadaddr}\0"
+		"bootm 0x82000000 0x84000000\0"
 
 #define CONFIG_BOOTCOMMAND \
 	"run nandboot"
@@ -302,6 +307,7 @@
 
 #define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0) /* default load */
 								/* address */
+#define CONFIG_PREBOOT
 
 /*
  * AM3517 has 12 GP timers, they can be driven by the system clock
@@ -421,4 +427,13 @@
 #define CONFIG_NET_RETRY_COUNT 10
 #endif
 
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_VGA_AS_SINGLE_DEVICE
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_VIDEO_BMP_RLE8
+#define CONFIG_CMD_BMP
+#define CONFIG_VIDEO_OMAP3
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
 #endif /* __CONFIG_H */
diff --git a/include/configs/microblaze-generic.h b/include/configs/microblaze-generic.h
index 721cd90..eed38c1 100644
--- a/include/configs/microblaze-generic.h
+++ b/include/configs/microblaze-generic.h
@@ -287,6 +287,10 @@
 # undef CONFIG_DCACHE
 #endif
 
+#ifndef XILINX_DCACHE_BYTE_SIZE
+#define XILINX_DCACHE_BYTE_SIZE	32768
+#endif
+
 /*
  * BOOTP options
  */
diff --git a/include/configs/mimc200.h b/include/configs/mimc200.h
index d5797cb..8031a05 100644
--- a/include/configs/mimc200.h
+++ b/include/configs/mimc200.h
@@ -131,7 +131,6 @@
 #define CONFIG_MMC
 #define CONFIG_GENERIC_ATMEL_MCI
 #define CONFIG_GENERIC_MMC
-#define CONFIG_SYS_MMC_MAX_BLK_COUNT 1
 
 #if defined(CONFIG_LCD)
 #define CONFIG_CMD_BMP
diff --git a/include/configs/mpc8308_p1m.h b/include/configs/mpc8308_p1m.h
index 035a1b6..aa681f0 100644
--- a/include/configs/mpc8308_p1m.h
+++ b/include/configs/mpc8308_p1m.h
@@ -30,6 +30,7 @@
  */
 #define CONFIG_E300		1 /* E300 family */
 #define CONFIG_MPC83xx		1 /* MPC83xx family */
+#define CONFIG_MPC830x		1 /* MPC830x family */
 #define CONFIG_MPC8308		1 /* MPC8308 CPU specific */
 #define CONFIG_MPC8308_P1M	1 /* mpc8308_p1m board specific */
 
diff --git a/include/configs/mx28evk.h b/include/configs/mx28evk.h
index 7cdbec6..2916c71 100644
--- a/include/configs/mx28evk.h
+++ b/include/configs/mx28evk.h
@@ -142,7 +142,7 @@
 #ifdef	CONFIG_CMD_MMC
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
-#define CONFIG_MMC_BOUNCE_BUFFER
+#define CONFIG_BOUNCE_BUFFER
 #define CONFIG_MXS_MMC
 #endif
 
@@ -313,7 +313,7 @@
 		"dhcp ${uimage}; bootm\0"
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/mx51evk.h b/include/configs/mx51evk.h
index 8cf59fe..89feaed 100644
--- a/include/configs/mx51evk.h
+++ b/include/configs/mx51evk.h
@@ -181,7 +181,7 @@
 		"dhcp ${uimage}; bootm\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/mx53ard.h b/include/configs/mx53ard.h
index fea93b4..62cb42b 100644
--- a/include/configs/mx53ard.h
+++ b/include/configs/mx53ard.h
@@ -119,7 +119,7 @@
 		"dhcp ${uimage}; bootm\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/mx53evk.h b/include/configs/mx53evk.h
index 0955fda..c472075 100644
--- a/include/configs/mx53evk.h
+++ b/include/configs/mx53evk.h
@@ -132,7 +132,7 @@
 		"dhcp ${uimage}; bootm\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/mx53loco.h b/include/configs/mx53loco.h
index f2384f3..a62ea78 100644
--- a/include/configs/mx53loco.h
+++ b/include/configs/mx53loco.h
@@ -141,7 +141,7 @@
 		"dhcp ${uimage}; bootm\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/mx53smd.h b/include/configs/mx53smd.h
index ff2a290..9e83319 100644
--- a/include/configs/mx53smd.h
+++ b/include/configs/mx53smd.h
@@ -118,7 +118,7 @@
 		"dhcp ${uimage}; bootm\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/mx6qarm2.h b/include/configs/mx6qarm2.h
index b425fed..23562a8 100644
--- a/include/configs/mx6qarm2.h
+++ b/include/configs/mx6qarm2.h
@@ -107,7 +107,7 @@
 
 #define CONFIG_BOOTCOMMAND \
 	"mmc dev ${mmcdev};" \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/mx6qsabrelite.h b/include/configs/mx6qsabrelite.h
index 5989eb2..b56d7ca 100644
--- a/include/configs/mx6qsabrelite.h
+++ b/include/configs/mx6qsabrelite.h
@@ -178,7 +178,7 @@
 
 #define CONFIG_BOOTCOMMAND \
        "mmc dev ${mmcdev};" \
-       "if mmc rescan ${mmcdev}; then " \
+       "mmc dev ${mmcdev}; if mmc rescan; then " \
 	       "if run loadbootscript; then " \
 		       "run bootscript; " \
 	       "else " \
diff --git a/include/configs/nokia_rx51.h b/include/configs/nokia_rx51.h
new file mode 100644
index 0000000..8506604
--- /dev/null
+++ b/include/configs/nokia_rx51.h
@@ -0,0 +1,452 @@
+/*
+ * (C) Copyright 2011-2012
+ * Pali Rohár <pali.rohar@gmail.com>
+ *
+ * (C) Copyright 2010
+ * Alistair Buxton <a.j.buxton@gmail.com>
+ *
+ * Derived from Beagle Board code:
+ * (C) Copyright 2006-2008
+ * Texas Instruments.
+ * Richard Woodruff <r-woodruff2@ti.com>
+ * Syed Mohammed Khasim <x0khasim@ti.com>
+ *
+ * Configuration settings for the Nokia RX-51 aka N900.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+
+#define CONFIG_OMAP			/* in a TI OMAP core */
+#define CONFIG_OMAP34XX			/* which is a 34XX */
+#define CONFIG_OMAP3430			/* which is in a 3430 */
+#define CONFIG_OMAP3_RX51		/* working with RX51 */
+#define CONFIG_SYS_L2CACHE_OFF		/* pretend there is no L2 CACHE */
+
+#define CONFIG_MACH_TYPE		MACH_TYPE_NOKIA_RX51
+
+/*
+ * Nokia X-Loader loading secondary image to address 0x80400000
+ * NOLO loading boot image to random place, so it doesn't really
+ * matter what we set this to. We have to copy u-boot to this address
+ */
+#define CONFIG_SYS_TEXT_BASE	0x80008000
+
+#define CONFIG_SDRC			/* The chip has SDRC controller */
+
+#include <asm/arch/cpu.h>		/* get chip and board defs */
+#include <asm/arch/omap3.h>
+#include <asm/arch/mem.h>
+#include <linux/stringify.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK			26000000	/* Clock output from T2 */
+#define V_SCLK			(V_OSCK >> 1)
+
+#undef CONFIG_USE_IRQ				/* no support for IRQs */
+#define CONFIG_MISC_INIT_R
+#define CONFIG_SKIP_LOWLEVEL_INIT		/* X-Loader set everything up */
+
+#define CONFIG_CMDLINE_TAG	/* enable passing kernel command line string */
+#define CONFIG_INITRD_TAG			/* enable passing initrd */
+#define CONFIG_REVISION_TAG			/* enable passing revision tag*/
+#define CONFIG_SETUP_MEMORY_TAGS		/* enable memory tag */
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE			(128 << 10)
+#define CONFIG_UBI_SIZE			(512 << 10)
+#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
+					(128 << 10))
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define V_NS16550_CLK		48000000		/* 48MHz (APLL96/2) */
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
+#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX		3
+#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
+#define CONFIG_SERIAL3			3		/* UART3 on RX-51 */
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
+#define CONFIG_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#define CONFIG_MUSB_UDC
+#define CONFIG_MUSB_HDC
+#define CONFIG_USB_OMAP3
+#define CONFIG_TWL4030_USB
+
+/* USB device configuration */
+#define CONFIG_USB_DEVICE
+#define CONFIG_USBD_VENDORID		0x0421
+#define CONFIG_USBD_PRODUCTID		0x01c8
+#define CONFIG_USBD_MANUFACTURER	"Nokia"
+#define CONFIG_USBD_PRODUCT_NAME	"N900"
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+#define CONFIG_SYS_NO_FLASH
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_EXT2			/* EXT2 Support */
+#define CONFIG_CMD_EXT4			/* EXT4 Support */
+#define CONFIG_CMD_FAT			/* FAT support */
+
+#define CONFIG_CMD_I2C			/* I2C serial bus support */
+#define CONFIG_CMD_MMC			/* MMC support */
+#define CONFIG_CMD_GPIO			/* Enable gpio command */
+
+#define CONFIG_CMDLINE_EDITING		/* add command line history */
+#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */
+
+#define CONFIG_CMD_CLEAR		/* ANSI terminal clear screen command */
+
+#ifdef ONENAND_SUPPORT
+
+#define CONFIG_CMD_ONENAND		/* ONENAND support */
+#define CONFIG_CMD_MTDPARTS		/* mtd parts support */
+
+#ifdef UBIFS_SUPPORT
+#define CONFIG_CMD_UBI			/* UBI Support */
+#define CONFIG_CMD_UBIFS		/* UBIFS Support */
+#endif
+
+#endif
+
+/* commands not needed from config_cmd_default.h */
+#undef CONFIG_CMD_FPGA			/* FPGA configuration Support */
+#undef CONFIG_CMD_IMI			/* iminfo */
+#undef CONFIG_CMD_NET			/* bootp, tftpboot, rarpboot */
+#undef CONFIG_CMD_NFS			/* NFS support */
+#undef CONFIG_CMD_SAVEENV		/* saveenv */
+#undef CONFIG_CMD_SETGETDCR		/* DCR support on 4xx */
+
+#define CONFIG_OMAP3_SPI
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED		100000
+#define CONFIG_SYS_I2C_SLAVE		1
+#define CONFIG_DRIVER_OMAP34XX_I2C
+
+/*
+ * TWL4030
+ */
+#define CONFIG_TWL4030_POWER
+#define CONFIG_TWL4030_LED
+#define CONFIG_TWL4030_KEYPAD
+
+#define CONFIG_OMAP_GPIO
+#define GPIO_SLIDE			71
+
+/*
+ * Board ONENAND Info.
+ */
+
+#define PART1_NAME			"bootloader"
+#define PART1_SIZE			128
+#define PART1_MULL			1024
+#define PART1_SUFF			"k"
+#define PART1_OFFS			0x00000000
+#define PART1_MASK			0x00000003
+
+#define PART2_NAME			"config"
+#define PART2_SIZE			384
+#define PART2_MULL			1024
+#define PART2_SUFF			"k"
+#define PART2_OFFS			0x00020000
+#define PART2_MASK			0x00000000
+
+#define PART3_NAME			"log"
+#define PART3_SIZE			256
+#define PART3_MULL			1024
+#define PART3_SUFF			"k"
+#define PART3_OFFS			0x00080000
+#define PART3_MASK			0x00000000
+
+#define PART4_NAME			"kernel"
+#define PART4_SIZE			2
+#define PART4_MULL			1024*1024
+#define PART4_SUFF			"m"
+#define PART4_OFFS			0x000c0000
+#define PART4_MASK			0x00000000
+
+#define PART5_NAME			"initfs"
+#define PART5_SIZE			2
+#define PART5_MULL			1024*1024
+#define PART5_SUFF			"m"
+#define PART5_OFFS			0x002c0000
+#define PART5_MASK			0x00000000
+
+#define PART6_NAME			"rootfs"
+#define PART6_SIZE			257280
+#define PART6_MULL			1024
+#define PART6_SUFF			"k"
+#define PART6_OFFS			0x004c0000
+#define PART6_MASK			0x00000000
+
+#ifdef ONENAND_SUPPORT
+
+#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
+#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M
+#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
+#define CONFIG_MTD_DEVICE
+#define CONFIG_MTD_PARTITIONS
+
+#ifdef UBIFS_SUPPORT
+#define CONFIG_RBTREE
+#define CONFIG_LZO
+#endif
+
+#define MTDIDS_DEFAULT			"onenand0=onenand"
+#define MTDPARTS_DEFAULT		"mtdparts=onenand:" \
+		__stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
+		__stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
+		__stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
+		__stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
+		__stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
+		"-(" PART6_NAME ")"
+
+#endif
+
+/* Watchdog support */
+#define CONFIG_HW_WATCHDOG
+
+/*
+ * Framebuffer
+ */
+/* Video console */
+#define CONFIG_VIDEO
+#define CONFIG_CFB_CONSOLE
+#define CONFIG_CFB_CONSOLE_ANSI	/* Enable ANSI escape codes in framebuffer */
+#define CONFIG_VIDEO_LOGO
+#define VIDEO_FB_16BPP_PIXEL_SWAP
+#define VIDEO_FB_16BPP_WORD_SWAP
+#define CONFIG_VIDEO_SW_CURSOR
+#define CONFIG_SPLASH_SCREEN
+
+/* functions for cfb_console */
+#define VIDEO_KBD_INIT_FCT		rx51_kp_init()
+#define VIDEO_TSTC_FCT			rx51_kp_tstc
+#define VIDEO_GETC_FCT			rx51_kp_getc
+#ifndef __ASSEMBLY__
+int rx51_kp_init(void);
+int rx51_kp_tstc(void);
+int rx51_kp_getc(void);
+#endif
+
+#ifndef MTDPARTS_DEFAULT
+#define MTDPARTS_DEFAULT
+#endif
+
+/* Environment information */
+#define CONFIG_BOOTDELAY		3
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+	"mtdparts=" MTDPARTS_DEFAULT "\0" \
+	"usbtty=cdc_acm\0" \
+	"stdin=vga\0" \
+	"stdout=vga\0" \
+	"stderr=vga\0" \
+	"setcon=setenv stdin ${con};" \
+		"setenv stdout ${con};" \
+		"setenv stderr ${con}\0" \
+	"sercon=setenv con serial; run setcon\0" \
+	"usbcon=setenv con usbtty; run setcon\0" \
+	"vgacon=setenv con vga; run setcon\0" \
+	"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
+	"switchmmc=mmc dev ${mmcnum}\0" \
+	"kernaddr=0x82008000\0" \
+	"initrdaddr=0x84008000\0" \
+	"scriptaddr=0x86008000\0" \
+	"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
+		"${loadaddr} ${mmcfile}\0" \
+	"kernload=setenv loadaddr ${kernaddr};" \
+		"setenv mmcfile ${mmckernfile};" \
+		"run fileload\0" \
+	"initrdload=setenv loadaddr ${initrdaddr};" \
+		"setenv mmcfile ${mmcinitrdfile};" \
+		"run fileload\0" \
+	"scriptload=setenv loadaddr ${scriptaddr};" \
+		"setenv mmcfile ${mmcscriptfile};" \
+		"run fileload\0" \
+	"scriptboot=echo Running ${mmcscriptfile} from mmc " \
+		"${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
+	"kernboot=echo Booting ${mmckernfile} from mmc " \
+		"${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
+	"kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
+		"${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
+	"attachboot=echo Booting attached kernel image ...;" \
+		"setenv setup_omap_atag 1;" \
+		"bootm ${attkernaddr};" \
+		"setenv setup_omap_atag\0" \
+	"trymmcscriptboot=if run switchmmc; then " \
+			"if run scriptload; then " \
+				"run scriptboot;" \
+			"fi;" \
+		"fi\0" \
+	"trymmckernboot=if run switchmmc; then " \
+			"if run kernload; then " \
+				"run kernboot;" \
+			"fi;" \
+		"fi\0" \
+	"trymmckerninitrdboot=if run switchmmc; then " \
+			"if run initrdload; then " \
+				"if run kernload; then " \
+					"run kerninitrdboot;" \
+				"fi;" \
+			"fi; " \
+		"fi\0" \
+	"trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
+		"setenv mmckernfile uImage; run trymmckernboot\0" \
+	"trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
+		"setenv mmcpart 2; run trymmcpartboot;" \
+		"setenv mmcpart 3; run trymmcpartboot;" \
+		"setenv mmcpart 4; run trymmcpartboot\0" \
+	"trymmcboot=if run switchmmc; then " \
+			"setenv mmctype fat;" \
+			"run trymmcallpartboot;" \
+			"setenv mmctype ext2;" \
+			"run trymmcallpartboot;" \
+			"setenv mmctype ext4;" \
+			"run trymmcallpartboot;" \
+		"fi\0" \
+	"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
+	"sdboot=setenv mmcnum 0; run trymmcboot\0" \
+	""
+
+#define CONFIG_PREBOOT \
+	"if run slide; then true; else run attachboot; fi;" \
+	"echo Extra commands:;" \
+	"echo run sercon - Use serial port for control.;" \
+	"echo run usbcon - Use usbtty for control.;" \
+	"echo run vgacon - Use framebuffer/keyboard.;" \
+	"echo run sdboot - Boot from SD card slot.;" \
+	"echo run emmcboot - Boot internal eMMC memory.;" \
+	"echo run attachboot - Boot attached kernel image.;" \
+	"echo"
+
+#define CONFIG_BOOTCOMMAND \
+	"run sdboot;" \
+	"run emmcboot;" \
+	"run attachboot;" \
+	"echo"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser */
+#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
+#define CONFIG_SYS_PROMPT		"Nokia RX-51 # "
+#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
+						sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
+#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)
+
+/*
+ * OMAP3 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ			1000
+
+/*
+ * Stack sizes
+ *
+ * The stack sizes are set up in start.S using the settings below
+ */
+#define CONFIG_STACKSIZE		(128 << 10) /* regular stack 128 KiB */
+
+/*
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS		2
+#define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0
+
+/*
+ * FLASH and environment organization
+ */
+
+#define CONFIG_ENV_IS_NOWHERE
+
+#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE	0x800
+#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
+			CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
+
+/*
+ * Attached kernel image
+ */
+
+#define SDRAM_SIZE			0x10000000	/* 256 MB */
+#define SDRAM_END			(CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
+
+#define IMAGE_MAXSIZE			0x1FF800	/* 2 MB - 2 kB */
+#define KERNEL_OFFSET			0x40000		/* 256 kB */
+#define KERNEL_MAXSIZE			(IMAGE_MAXSIZE-KERNEL_OFFSET)
+#define KERNEL_ADDRESS			(SDRAM_END-KERNEL_MAXSIZE)
+
+/* Reserve protected RAM for attached kernel */
+#define CONFIG_PRAM			((KERNEL_MAXSIZE >> 10)+1)
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h
index f79f996..7a3cc16 100644
--- a/include/configs/omap3_beagle.h
+++ b/include/configs/omap3_beagle.h
@@ -289,7 +289,7 @@
 	"userbutton_nonxm=gpio input 7;\0"
 /* "run userbutton" will return 1 (false) if is pressed and 0 (false) if not */
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run userbutton; then " \
 			"setenv bootenv uEnv.txt;" \
 		"else " \
diff --git a/include/configs/omap3_evm.h b/include/configs/omap3_evm.h
index 632a13f..f6e4236 100644
--- a/include/configs/omap3_evm.h
+++ b/include/configs/omap3_evm.h
@@ -162,7 +162,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h
index b975a6c..b2457d0 100644
--- a/include/configs/omap3_logic.h
+++ b/include/configs/omap3_logic.h
@@ -202,7 +202,7 @@
 	"mtdids=" MTDIDS_DEFAULT "\0"	\
 	"mtdparts=" MTDPARTS_DEFAULT "\0" \
 	"mmcdev=0\0" \
-	"autoboot=if mmc rescan ${mmcdev}; then " \
+	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
 			"if run loadbootscript; then " \
 				"run bootscript; " \
 			"else " \
diff --git a/include/configs/omap3_overo.h b/include/configs/omap3_overo.h
index f6d6f75..626cf7a 100644
--- a/include/configs/omap3_overo.h
+++ b/include/configs/omap3_overo.h
@@ -188,7 +188,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/omap3_zoom1.h b/include/configs/omap3_zoom1.h
index 891e6f4..e152055 100644
--- a/include/configs/omap3_zoom1.h
+++ b/include/configs/omap3_zoom1.h
@@ -198,7 +198,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/omap4_common.h b/include/configs/omap4_common.h
index cbc9bdb..a32369a 100644
--- a/include/configs/omap4_common.h
+++ b/include/configs/omap4_common.h
@@ -165,7 +165,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/omap5_evm.h b/include/configs/omap5_evm.h
index 743edfd..623da77 100644
--- a/include/configs/omap5_evm.h
+++ b/include/configs/omap5_evm.h
@@ -167,7 +167,7 @@
 		"bootm ${loadaddr}\0" \
 
 #define CONFIG_BOOTCOMMAND \
-	"if mmc rescan ${mmcdev}; then " \
+	"mmc dev ${mmcdev}; if mmc rescan; then " \
 		"if run loadbootscript; then " \
 			"run bootscript; " \
 		"else " \
diff --git a/include/configs/palmtc.h b/include/configs/palmtc.h
index 6e8d8e9..9c948c5 100644
--- a/include/configs/palmtc.h
+++ b/include/configs/palmtc.h
@@ -77,7 +77,8 @@
  */
 #ifdef	CONFIG_CMD_MMC
 #define	CONFIG_MMC
-#define	CONFIG_PXA_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
 #define	CONFIG_SYS_MMC_BASE		0xF0000000
 #define	CONFIG_CMD_FAT
 #define	CONFIG_CMD_EXT2
diff --git a/include/configs/pxa255_idp.h b/include/configs/pxa255_idp.h
index 24c5363..5a15af6 100644
--- a/include/configs/pxa255_idp.h
+++ b/include/configs/pxa255_idp.h
@@ -245,7 +245,8 @@
 #define RTC	1				/* enable 32KHz osc */
 
 #ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
 #define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE		0xF0000000
 #endif
diff --git a/include/configs/qemu-mips.h b/include/configs/qemu-mips.h
index b8b9705..5bc7b0d 100644
--- a/include/configs/qemu-mips.h
+++ b/include/configs/qemu-mips.h
@@ -28,14 +28,10 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-#define CONFIG_MIPS32		1	/* MIPS32 CPU core */
-#define CONFIG_QEMU_MIPS	1
+#define CONFIG_MIPS32			/* MIPS32 CPU core */
+#define CONFIG_QEMU_MIPS
 #define CONFIG_MISC_INIT_R
 
-/*IP address is default used by Qemu*/
-#define CONFIG_IPADDR		10.0.2.15	/* Our IP address */
-#define CONFIG_SERVERIP		10.0.2.2	/* Server IP address */
-
 #define CONFIG_BOOTDELAY	10	/* autoboot after 10 seconds */
 
 #define CONFIG_BAUDRATE		115200
@@ -74,31 +70,31 @@
 #define CONFIG_CMD_DHCP
 
 #define CONFIG_DRIVER_NE2000
-#define CONFIG_DRIVER_NE2000_BASE	(0xb4000300)
+#define CONFIG_DRIVER_NE2000_BASE	0xb4000300
 
 #define CONFIG_SYS_NS16550
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		115200
-#define CONFIG_SYS_NS16550_COM1	(0xb40003f8)
-#define CONFIG_CONS_INDEX	1
+#define CONFIG_SYS_NS16550_COM1		0xb40003f8
+#define CONFIG_CONS_INDEX		1
 
 #define CONFIG_CMD_IDE
 #define CONFIG_DOS_PARTITION
 
 #define CONFIG_SYS_IDE_MAXBUS		2
-#define CONFIG_SYS_ATA_IDE0_OFFSET	(0x1f0)
-#define CONFIG_SYS_ATA_IDE1_OFFSET	(0x170)
-#define CONFIG_SYS_ATA_DATA_OFFSET	(0)
-#define CONFIG_SYS_ATA_REG_OFFSET	(0)
-#define CONFIG_SYS_ATA_BASE_ADDR	(0xb4000000)
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x1f0
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
+#define CONFIG_SYS_ATA_DATA_OFFSET	0
+#define CONFIG_SYS_ATA_REG_OFFSET	0
+#define CONFIG_SYS_ATA_BASE_ADDR	0xb4000000
 
-#define CONFIG_SYS_IDE_MAXDEVICE	(4)
+#define CONFIG_SYS_IDE_MAXDEVICE	4
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP				/* undef to save memory */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 /* Monitor Command Prompt */
 #if defined(CONFIG_SYS_LITTLE_ENDIAN)
@@ -111,9 +107,12 @@
 #define CONFIG_CMDLINE_EDITING
 #define CONFIG_SYS_HUSH_PARSER
 
-#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)  /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16		/* max number of command args */
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS		16
 
 #define CONFIG_SYS_MALLOC_LEN		128*1024
 
@@ -125,9 +124,11 @@
 
 #define CONFIG_SYS_HZ			1000
 
-#define CONFIG_SYS_SDRAM_BASE		0x80000000	/* Cached addr */
+/* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE		0x80000000
 
-#define CONFIG_SYS_LOAD_ADDR		0x81000000	/* default load address */
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0x81000000
 
 #define CONFIG_SYS_MEMTEST_START	0x80100000
 #define CONFIG_SYS_MEMTEST_END		0x80800000
@@ -135,8 +136,8 @@
 /*-----------------------------------------------------------------------
  * FLASH and environment organization
  */
-
 /* The following #defines are needed to get flash environment right */
+#define CONFIG_SYS_TEXT_BASE		0xbfc00000 /* Rom version */
 #define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MONITOR_LEN		(192 << 10)
 
@@ -146,11 +147,11 @@
 #define CONFIG_SYS_FLASH_BASE		0xbfc00000
 #define CONFIG_SYS_MAX_FLASH_BANKS	1
 #define CONFIG_SYS_MAX_FLASH_SECT	128
-#define CONFIG_SYS_FLASH_CFI		1	/* Flash memory is CFI compliant */
-#define CONFIG_FLASH_CFI_DRIVER	1
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 
-#define CONFIG_ENV_IS_IN_FLASH	1
+#define CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
 
 /* Address and size of Primary Environment Sector */
@@ -160,8 +161,6 @@
 
 #define MEM_SIZE		128
 
-#undef CONFIG_MEMSIZE_IN_BYTES
-
 #define CONFIG_LZMA
 
 /*-----------------------------------------------------------------------
diff --git a/include/configs/qemu-mips64.h b/include/configs/qemu-mips64.h
new file mode 100644
index 0000000..82647e2
--- /dev/null
+++ b/include/configs/qemu-mips64.h
@@ -0,0 +1,175 @@
+/*
+ * (C) Copyright 2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for qemu-mips64 target.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define CONFIG_MIPS64			/* MIPS64 CPU core */
+#define CONFIG_QEMU_MIPS
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_BOOTDELAY	10	/* autoboot after 10 seconds */
+
+#define CONFIG_BAUDRATE		115200
+
+#define CONFIG_TIMESTAMP		/* Print image info with timestamp */
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS					\
+	"addmisc=setenv bootargs ${bootargs} "				\
+		"console=ttyS0,${baudrate} "				\
+		"panic=1\0"						\
+	"bootfile=/tftpboot/vmlinux\0"					\
+	"load=tftp ffffffff80500000 ${u-boot}\0"			\
+	""
+
+#define CONFIG_BOOTCOMMAND	"bootp;bootelf"
+
+/*
+ * BOOTP options
+ */
+#define CONFIG_BOOTP_BOOTFILESIZE
+#define CONFIG_BOOTP_BOOTPATH
+#define CONFIG_BOOTP_GATEWAY
+#define CONFIG_BOOTP_HOSTNAME
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_EXT2
+#undef CONFIG_CMD_LOADB
+#undef CONFIG_CMD_LOADS
+#define CONFIG_CMD_DHCP
+
+#define CONFIG_DRIVER_NE2000
+#define CONFIG_DRIVER_NE2000_BASE	0xffffffffb4000300
+
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		115200
+#define CONFIG_SYS_NS16550_COM1		0xffffffffb40003f8
+#define CONFIG_CONS_INDEX		1
+
+#define CONFIG_CMD_IDE
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_SYS_IDE_MAXBUS		2
+#define CONFIG_SYS_ATA_IDE0_OFFSET	0x1f0
+#define CONFIG_SYS_ATA_IDE1_OFFSET	0x170
+#define CONFIG_SYS_ATA_DATA_OFFSET	0
+#define CONFIG_SYS_ATA_REG_OFFSET	0
+#define CONFIG_SYS_ATA_BASE_ADDR	0xffffffffb4000000
+
+#define CONFIG_SYS_IDE_MAXDEVICE	4
+
+#define CONFIG_CMD_RARP
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP		/* undef to save memory */
+
+/* Monitor Command Prompt */
+#if defined(CONFIG_SYS_LITTLE_ENDIAN)
+#define CONFIG_SYS_PROMPT		"qemu-mips64el # "
+#else
+#define CONFIG_SYS_PROMPT		"qemu-mips64 # "
+#endif
+
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_SYS_HUSH_PARSER
+
+/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE		256
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+/* max number of command args */
+#define CONFIG_SYS_MAXARGS		16
+
+#define CONFIG_SYS_MALLOC_LEN		128*1024
+
+#define CONFIG_SYS_BOOTPARAMS_LEN	128*1024
+
+#define CONFIG_SYS_MHZ			132
+
+#define CONFIG_SYS_MIPS_TIMER_FREQ	(CONFIG_SYS_MHZ * 1000000)
+
+#define CONFIG_SYS_HZ			1000
+
+/* Cached addr */
+#define CONFIG_SYS_SDRAM_BASE		0xffffffff80000000
+
+/* default load address */
+#define CONFIG_SYS_LOAD_ADDR		0xffffffff81000000
+
+#define CONFIG_SYS_MEMTEST_START	0xffffffff80100000
+#define CONFIG_SYS_MEMTEST_END		0xffffffff80800000
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+/* The following #defines are needed to get flash environment right */
+#define CONFIG_SYS_TEXT_BASE		0xffffffffbfc00000 /* Rom version */
+#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN		(192 << 10)
+
+#define CONFIG_SYS_INIT_SP_OFFSET	0x400000
+
+/* We boot from this flash, selected with dip switch */
+#define CONFIG_SYS_FLASH_BASE		0xffffffffbfc00000
+#define CONFIG_SYS_MAX_FLASH_BANKS	1
+#define CONFIG_SYS_MAX_FLASH_SECT	128
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN)
+
+/* Address and size of Primary Environment Sector */
+#define CONFIG_ENV_SIZE		0x8000
+
+#define CONFIG_ENV_OVERWRITE	1
+
+#define MEM_SIZE		128
+
+#define CONFIG_LZMA
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_DCACHE_SIZE		16384
+#define CONFIG_SYS_ICACHE_SIZE		16384
+#define CONFIG_SYS_CACHELINE_SIZE	32
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/quantum.h b/include/configs/quantum.h
index 4f24651..072bd9c 100644
--- a/include/configs/quantum.h
+++ b/include/configs/quantum.h
@@ -317,6 +317,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card Adapter */
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE	 not supported	*/
diff --git a/include/configs/sbc8560.h b/include/configs/sbc8560.h
deleted file mode 100644
index 46d6098..0000000
--- a/include/configs/sbc8560.h
+++ /dev/null
@@ -1,459 +0,0 @@
-/*
- * (C) Copyright 2002,2003 Motorola,Inc.
- * Xianghua Xiao <X.Xiao@motorola.com>
- *
- * (C) Copyright 2004 Wind River Systems Inc <www.windriver.com>.
- * Added support for Wind River SBC8560 board
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * sbc8560 board configuration file.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-/*
- * Top level Makefile configuration choices
- */
-#ifdef CONFIG_66
-#define CONFIG_PCI_66
-#endif
-
-/*
- * High Level Configuration Options
- */
-#define CONFIG_BOOKE		1	/* BOOKE			*/
-#define CONFIG_E500		1	/* BOOKE e500 family		*/
-#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560		*/
-#define CONFIG_MPC85xx_REV1	1	/* MPC85xx Rev 1.0 chip		*/
-
-#define	CONFIG_SYS_TEXT_BASE	0xfffc0000
-
-
-#define CONFIG_CPM2		1	/* has CPM2 */
-#define CONFIG_SBC8560		1	/* configuration for SBC8560 board */
-#define CONFIG_MPC8560		1
-
-/* XXX flagging this as something I might want to delete */
-#define CONFIG_MPC8560ADS	1	/* MPC8560ADS board specific	*/
-
-#define CONFIG_TSEC_ENET		/* tsec ethernet support	*/
-#undef	CONFIG_PCI			/* pci ethernet support		*/
-#undef  CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support	*/
-
-#define CONFIG_FSL_LAW		1	/* Use common FSL init code */
-
-#define CONFIG_ENV_OVERWRITE
-
-/* Using Localbus SDRAM to emulate flash before we can program the flash,
- * normally you need a flash-boot image(u-boot.bin), if so undef this.
- */
-#undef CONFIG_RAM_AS_FLASH
-
-#if defined(CONFIG_PCI_66)		/* some PCI card is 33Mhz only	*/
-  #define CONFIG_SYS_CLK_FREQ	66000000/* sysclk for MPC85xx		*/
-#else
-  #define CONFIG_SYS_CLK_FREQ	33000000/* most pci cards are 33Mhz	*/
-#endif
-
-/* below can be toggled for performance analysis. otherwise use default */
-#define CONFIG_L2_CACHE			    /* toggle L2 cache		*/
-#undef	CONFIG_BTB			    /* toggle branch predition	*/
-
-#define CONFIG_BOARD_EARLY_INIT_F 1	    /* Call board_early_init_f	*/
-#define CONFIG_RESET_PHY_R	1	    /* Call reset_phy()		*/
-
-#undef	CONFIG_SYS_DRAM_TEST			    /* memory test, takes time	*/
-#define CONFIG_SYS_MEMTEST_START	0x00200000  /* memtest region */
-#define CONFIG_SYS_MEMTEST_END		0x00400000
-
-#if (defined(CONFIG_PCI) && defined(CONFIG_TSEC_ENET) || \
-     defined(CONFIG_PCI) && defined(CONFIG_ETHER_ON_FCC) || \
-     defined(CONFIG_TSEC_ENET) && defined(CONFIG_ETHER_ON_FCC))
-#error "You can only use ONE of PCI Ethernet Card or TSEC Ethernet or CPM FCC."
-#endif
-
-#define CONFIG_SYS_SDRAM_SIZE		512		/* DDR is 512MB */
-
-/* DDR Setup */
-#define CONFIG_FSL_DDR1
-#undef CONFIG_FSL_DDR_INTERACTIVE
-#undef  CONFIG_DDR_ECC				/* only for ECC DDR module	*/
-#undef  CONFIG_SPD_EEPROM			/* Use SPD EEPROM for DDR setup */
-#undef  CONFIG_DDR_SPD
-
-#if defined(CONFIG_MPC85xx_REV1)
-#define CONFIG_SYS_FSL_ERRATUM_DDR_MSYNC_IN	/* possible DLL fix needed */
-#endif
-
-#undef  CONFIG_DDR_ECC			    /* only for ECC DDR module */
-#undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
-#define CONFIG_MEM_INIT_VALUE	0xDeadBeef
-
-#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
-#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
-#define CONFIG_VERY_BIG_RAM
-
-#define CONFIG_NUM_DDR_CONTROLLERS	1
-#define CONFIG_DIMM_SLOTS_PER_CTLR	1
-#define CONFIG_CHIP_SELECTS_PER_CTRL	2
-
-/* I2C addresses of SPD EEPROMs */
-#define SPD_EEPROM_ADDRESS	0x55	/* CTLR 0 DIMM 0 */
-
-#undef CONFIG_CLOCKS_IN_MHZ
-
-#if defined(CONFIG_RAM_AS_FLASH)
-  #define CONFIG_SYS_LBC_SDRAM_BASE	0xfc000000	/* Localbus SDRAM */
-  #define CONFIG_SYS_FLASH_BASE	0xf8000000      /* start of FLASH 8M  */
-  #define CONFIG_SYS_BR0_PRELIM	0xf8000801      /* port size 8bit */
-  #define CONFIG_SYS_OR0_PRELIM	0xf8000ff7	/* 8MB Flash		*/
-#else /* Boot from real Flash */
-  #define CONFIG_SYS_LBC_SDRAM_BASE	0xf8000000	/* Localbus SDRAM */
-  #define CONFIG_SYS_FLASH_BASE	0xff800000      /* start of FLASH 8M    */
-  #define CONFIG_SYS_BR0_PRELIM	0xff800801      /* port size 8bit      */
-  #define CONFIG_SYS_OR0_PRELIM	0xff800ff7	/* 8MB Flash		*/
-#endif
-#define CONFIG_SYS_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB	*/
-
-/* local bus definitions */
-#define CONFIG_SYS_BR1_PRELIM		0xe4001801	/* 64M, 32-bit flash */
-#define CONFIG_SYS_OR1_PRELIM		0xfc000ff7
-
-#define CONFIG_SYS_BR2_PRELIM		0x00000000	/* CS2 not used */
-#define CONFIG_SYS_OR2_PRELIM		0x00000000
-
-#define CONFIG_SYS_BR3_PRELIM		0xf0001861	/* 64MB localbus SDRAM	*/
-#define CONFIG_SYS_OR3_PRELIM		0xfc000cc1
-
-#if defined(CONFIG_RAM_AS_FLASH)
-  #define CONFIG_SYS_BR4_PRELIM	0xf4001861	/* 64M localbus SDRAM */
-#else
-  #define CONFIG_SYS_BR4_PRELIM	0xf8001861	/* 64M localbus SDRAM */
-#endif
-#define CONFIG_SYS_OR4_PRELIM		0xfc000cc1
-
-#define CONFIG_SYS_BR5_PRELIM		0xfc000801	/* 16M CS5 misc devices */
-#if 1
-  #define CONFIG_SYS_OR5_PRELIM	0xff000ff7
-#else
-  #define CONFIG_SYS_OR5_PRELIM	0xff0000f0
-#endif
-
-#define CONFIG_SYS_BR6_PRELIM		0xe0001801	/* 64M, 32-bit flash */
-#define CONFIG_SYS_OR6_PRELIM		0xfc000ff7
-#define CONFIG_SYS_LBC_LCRR		0x00030002	/* local bus freq	*/
-#define CONFIG_SYS_LBC_LBCR		0x00000000
-#define CONFIG_SYS_LBC_LSRT		0x20000000
-#define CONFIG_SYS_LBC_MRTPR		0x20000000
-#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
-#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
-#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
-#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723
-
-/* just hijack the MOT BCSR def for SBC8560 misc devices */
-#define CONFIG_SYS_BCSR		((CONFIG_SYS_BR5_PRELIM & 0xff000000)|0x00400000)
-/* the size of CS5 needs to be >= 16M for TLB and LAW setups */
-
-#define CONFIG_SYS_INIT_RAM_LOCK	1
-#define CONFIG_SYS_INIT_RAM_ADDR	0x70000000	/* Initial RAM address	*/
-#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */
-
-#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
-
-#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
-#define CONFIG_SYS_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */
-
-/* Serial Port */
-#undef  CONFIG_CONS_ON_SCC	/* define if console on SCC */
-#undef	CONFIG_CONS_NONE	/* define if console on something else */
-
-#define CONFIG_CONS_INDEX	1
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	1
-#define CONFIG_SYS_NS16550_CLK		1843200 /* get_bus_freq(0) */
-#define CONFIG_BAUDRATE		9600
-
-#define CONFIG_SYS_BAUDRATE_TABLE  \
-	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
-
-#define CONFIG_SYS_NS16550_COM1	((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00700000)
-#define CONFIG_SYS_NS16550_COM2	((CONFIG_SYS_BR5_PRELIM & 0xff000000)+0x00800000)
-
-/* Use the HUSH parser */
-#define CONFIG_SYS_HUSH_PARSER
-
-/* pass open firmware flat tree */
-#define CONFIG_OF_LIBFDT                1
-#define CONFIG_OF_BOARD_SETUP           1
-#define CONFIG_OF_STDOUT_VIA_ALIAS      1
-
-/*
- * I2C
- */
-#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
-#define CONFIG_HARD_I2C		/* I2C with hardware support*/
-#undef	CONFIG_SOFT_I2C			/* I2C bit-banged */
-#define CONFIG_SYS_I2C_SPEED		400000	/* I2C speed and slave address	*/
-#define CONFIG_SYS_I2C_SLAVE		0x7F
-#define CONFIG_SYS_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
-#define CONFIG_SYS_I2C_OFFSET		0x3000
-
-#define CONFIG_SYS_PCI_MEM_BASE	0xC0000000
-#define CONFIG_SYS_PCI_MEM_PHYS	0xC0000000
-#define CONFIG_SYS_PCI_MEM_SIZE	0x10000000
-
-#ifdef CONFIG_TSEC_ENET
-
-#ifndef CONFIG_MII
-#define CONFIG_MII		1	/* MII PHY management */
-#endif
-#define CONFIG_TSEC1	1
-#define CONFIG_TSEC1_NAME	"TSEC0"
-#define CONFIG_TSEC2	1
-#define CONFIG_TSEC2_NAME	"TSEC1"
-#define TSEC1_PHY_ADDR		0x19
-#define TSEC2_PHY_ADDR		0x1a
-#define TSEC1_PHYIDX		0
-#define TSEC2_PHYIDX		0
-#define TSEC1_FLAGS		TSEC_GIGABIT
-#define TSEC2_FLAGS		TSEC_GIGABIT
-
-/* Options are: TSEC[0-1] */
-#define CONFIG_ETHPRIME		"TSEC0"
-
-#elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */
-
-  #undef  CONFIG_ETHER_NONE		/* define if ether on something else */
-  #define CONFIG_ETHER_ON_FCC2		/* cpm FCC ethernet support	*/
-  #define CONFIG_ETHER_INDEX	2	/* which channel for ether  */
-
-  #if (CONFIG_ETHER_INDEX == 2)
-    /*
-     * - Rx-CLK is CLK13
-     * - Tx-CLK is CLK14
-     * - Select bus for bd/buffers
-     * - Full duplex
-     */
-    #define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
-    #define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
-    #define CONFIG_SYS_CPMFCR_RAMTYPE	0
-    #define CONFIG_SYS_FCC_PSMR	(FCC_PSMR_FDE)
-
-  #elif (CONFIG_ETHER_INDEX == 3)
-    /* need more definitions here for FE3 */
-  #endif				/* CONFIG_ETHER_INDEX */
-
-  #define CONFIG_MII			/* MII PHY management */
-  #define CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/
-  /*
-   * GPIO pins used for bit-banged MII communications
-   */
-  #define MDIO_PORT	2		/* Port C */
-  #define MDIO_DECLARE	volatile ioport_t *iop = ioport_addr ( \
-				(immap_t *) CONFIG_SYS_IMMR, MDIO_PORT )
-  #define MDC_DECLARE	MDIO_DECLARE
-
-  #define MDIO_ACTIVE	(iop->pdir |=  0x00400000)
-  #define MDIO_TRISTATE	(iop->pdir &= ~0x00400000)
-  #define MDIO_READ	((iop->pdat &  0x00400000) != 0)
-
-  #define MDIO(bit)	if(bit) iop->pdat |=  0x00400000; \
-			else	iop->pdat &= ~0x00400000
-
-  #define MDC(bit)	if(bit) iop->pdat |=  0x00200000; \
-			else	iop->pdat &= ~0x00200000
-
-  #define MIIDELAY	udelay(1)
-
-#endif
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-
-#define CONFIG_SYS_FLASH_CFI		1	/* Flash is CFI conformant	*/
-#define CONFIG_FLASH_CFI_DRIVER	1	/* Use the common driver	*/
-#if 0
-#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1    /* use buffered writes (20x faster)   */
-#define CONFIG_SYS_FLASH_PROTECTION		/* use hardware protection	*/
-#endif
-#define CONFIG_SYS_MAX_FLASH_SECT	64	/* max number of sectors on one chip */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	*/
-
-#undef	CONFIG_SYS_FLASH_CHECKSUM
-#define CONFIG_SYS_FLASH_ERASE_TOUT	200000	/* Timeout for Flash Erase (in ms) */
-#define CONFIG_SYS_FLASH_WRITE_TOUT	50000	/* Timeout for Flash Write (in ms) */
-
-#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE /* start of monitor	*/
-
-#if 0
-/* XXX This doesn't work and I don't want to fix it */
-#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
-  #define CONFIG_SYS_RAMBOOT
-#else
-  #undef  CONFIG_SYS_RAMBOOT
-#endif
-#endif
-
-/* Environment */
-#if !defined(CONFIG_SYS_RAMBOOT)
-  #if defined(CONFIG_RAM_AS_FLASH)
-    #define CONFIG_ENV_IS_NOWHERE
-    #define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + 0x100000)
-    #define CONFIG_ENV_SIZE	0x2000
-  #else
-    #define CONFIG_ENV_IS_IN_FLASH	1
-    #define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K(one sector) for env */
-    #define CONFIG_ENV_ADDR	(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
-    #define CONFIG_ENV_SIZE	0x2000 /* CONFIG_ENV_SECT_SIZE */
-  #endif
-#else
-  #define CONFIG_SYS_NO_FLASH		1	/* Flash is not usable now	*/
-  #define CONFIG_ENV_IS_NOWHERE	1	/* Store ENV in memory only	*/
-  #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - 0x1000)
-  #define CONFIG_ENV_SIZE		0x2000
-#endif
-
-#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=dhcp console=ttyS0,9600"
-/*#define CONFIG_BOOTARGS      "root=/dev/ram rw console=ttyS0,115200"*/
-#define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */
-
-#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
-#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
-
-
-/*
- * BOOTP options
- */
-#define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
-
-
-/*
- * Command line configuration.
- */
-#include <config_cmd_default.h>
-
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_REGINFO
-
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-    #define CONFIG_CMD_MII
-#endif
-
-#if defined(CONFIG_SYS_RAMBOOT) || defined(CONFIG_RAM_AS_FLASH)
-    #undef CONFIG_CMD_SAVEENV
-    #undef CONFIG_CMD_LOADS
-#endif
-
-
-#undef CONFIG_WATCHDOG			/* watchdog disabled		*/
-
-/*
- * Miscellaneous configurable options
- */
-#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
-#define CONFIG_SYS_PROMPT	"SBC8560=> " /* Monitor Command Prompt	*/
-#if defined(CONFIG_CMD_KGDB)
-  #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
-#else
-  #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
-#endif
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
-#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
-#define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */
-#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1 ms ticks */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */
-
-#if defined(CONFIG_CMD_KGDB)
-#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
-#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
-#endif
-
-#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
-#define CONFIG_HAS_ETH0
-#define CONFIG_HAS_ETH1
-#endif
-
-/* You can compile in a MAC address and your custom net settings by using
- * the following syntax.  Your board should be marked with the assigned
- * MAC addresses directly on it.
- *
- * #define CONFIG_ETHADDR		de:ad:be:ef:00:00
- * #define CONFIG_ETH1ADDR		fa:ke:ad:dr:es:s!
- * #define CONFIG_SERVERIP		<server ip>
- * #define CONFIG_IPADDR		<board ip>
- * #define CONFIG_GATEWAYIP		<gateway ip>
- * #define CONFIG_NETMASK		<your netmask>
- */
-
-#define CONFIG_HOSTNAME		SBC8560
-#define CONFIG_ROOTPATH		"/home/ppc"
-#define CONFIG_BOOTFILE		"uImage"
-
-#define	CONFIG_EXTRA_ENV_SETTINGS		\
-	"netdev=eth0\0"				\
-	"consoledev=ttyS0\0"				\
-	"ramdiskaddr=2000000\0"			\
-	"ramdiskfile=ramdisk.uboot\0"			\
-	"fdtaddr=c00000\0"				\
-	"fdtfile=sbc8560.dtb\0"
-
-#define CONFIG_NFSBOOTCOMMAND						\
-	"setenv bootargs root=/dev/nfs rw "				\
-		"nfsroot=$serverip:$rootpath "				\
-		"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr - $fdtaddr"
-
-
-#define CONFIG_RAMBOOTCOMMAND \
-	"setenv bootargs root=/dev/ram rw "				\
-		"console=$consoledev,$baudrate $othbootargs;"		\
-	"tftp $ramdiskaddr $ramdiskfile;"				\
-	"tftp $loadaddr $bootfile;"					\
-	"tftp $fdtaddr $fdtfile;"					\
-	"bootm $loadaddr $ramdiskaddr $fdtaddr"
-
-#define CONFIG_BOOTCOMMAND	CONFIG_NFSBOOTCOMMAND
-
-#endif	/* __CONFIG_H */
diff --git a/include/configs/seaboard.h b/include/configs/seaboard.h
index 0727a4c..74d3b94 100644
--- a/include/configs/seaboard.h
+++ b/include/configs/seaboard.h
@@ -81,6 +81,7 @@
 #define CONFIG_SYS_MMC_ENV_PART 2
 
 /* USB Host support */
+#define CONFIG_USB_MAX_CONTROLLER_COUNT 3
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_TEGRA
 #define CONFIG_USB_STORAGE
diff --git a/include/configs/smdk2410.h b/include/configs/smdk2410.h
index 1c0978d..a8a56fd 100644
--- a/include/configs/smdk2410.h
+++ b/include/configs/smdk2410.h
@@ -66,6 +66,7 @@
  * USB support (currently only works with D-cache off)
  ************************************************************/
 #define CONFIG_USB_OHCI
+#define CONFIG_USB_OHCI_S3C24XX
 #define CONFIG_USB_KEYBOARD
 #define CONFIG_USB_STORAGE
 #define CONFIG_DOS_PARTITION
diff --git a/include/configs/suvd3.h b/include/configs/suvd3.h
index ae19701..c50832c 100644
--- a/include/configs/suvd3.h
+++ b/include/configs/suvd3.h
@@ -23,19 +23,28 @@
 /*
  * High Level Configuration Options
  */
-#define CONFIG_SUVD3		/* SUVD3 board specific */
-#define CONFIG_HOSTNAME		suvd3
-#define CONFIG_KM_BOARD_NAME   "suvd3"
 
+/* This needs to be set prior to including km/km83xx-common.h */
 #define	CONFIG_SYS_TEXT_BASE	0xF0000000
 
+#if defined(CONFIG_SUVD3)	/* SUVD3 board specific */
+#define CONFIG_HOSTNAME		suvd3
+#define CONFIG_KM_BOARD_NAME   "suvd3"
 /* include common defines/options for all 8321 Keymile boards */
 #include "km/km8321-common.h"
+#elif defined(CONFIG_KMVECT1)   /* VECT1 board specific */
+#define CONFIG_HOSTNAME		kmvect1
+#define CONFIG_KM_BOARD_NAME   "kmvect1"
+/* include common defines/options for all 8309 Keymile boards */
+#include "km/km8309-common.h"
+#else
+#error Supported boards are: SUVD3, KMVECT1
+#endif
 
 #define CONFIG_SYS_APP1_BASE		0xA0000000
-#define	CONFIG_SYS_APP1_SIZE		256 /* Megabytes */
+#define CONFIG_SYS_APP1_SIZE		256 /* Megabytes */
 #define CONFIG_SYS_APP2_BASE		0xB0000000
-#define	CONFIG_SYS_APP2_SIZE		256 /* Megabytes */
+#define CONFIG_SYS_APP2_SIZE		256 /* Megabytes */
 
 /* EEprom support */
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
diff --git a/include/configs/svm_sc8xx.h b/include/configs/svm_sc8xx.h
index 91686d6..2b24997 100644
--- a/include/configs/svm_sc8xx.h
+++ b/include/configs/svm_sc8xx.h
@@ -359,6 +359,8 @@
 
 #undef	CONFIG_IDE_8xx_PCCARD		/* Use IDE with PC Card	Adapter	*/
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
+#define CONFIG_IDE_INIT_POSTRESET	1	/* Use postreset IDE hook */
 #define	CONFIG_IDE_8xx_DIRECT	1	/* Direct IDE    not supported	*/
 #undef	CONFIG_IDE_LED			/* LED   for ide not supported	*/
 #undef	CONFIG_IDE_RESET		/* reset for ide not supported	*/
diff --git a/include/configs/t4qds.h b/include/configs/t4qds.h
new file mode 100644
index 0000000..d58c24c
--- /dev/null
+++ b/include/configs/t4qds.h
@@ -0,0 +1,875 @@
+/*
+ * Copyright 2011-2012 Freescale Semiconductor, Inc.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Corenet DS style board configuration file
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#ifdef CONFIG_RAMBOOT_PBL
+#define CONFIG_RAMBOOT_TEXT_BASE	CONFIG_SYS_TEXT_BASE
+#define CONFIG_RESET_VECTOR_ADDRESS	0xfffffffc
+#endif
+
+#define CONFIG_CMD_REGINFO
+
+/* High Level Configuration Options */
+#define CONFIG_BOOKE
+#define CONFIG_E6500
+#define CONFIG_E500			/* BOOKE e500 family */
+#define CONFIG_E500MC			/* BOOKE e500mc family */
+#define CONFIG_SYS_BOOK3E_HV		/* Category E.HV supported */
+#define CONFIG_MPC85xx			/* MPC85xx/PQ3 platform */
+#define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
+#define CONFIG_MP			/* support multiple processors */
+
+#ifndef CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_TEXT_BASE	0xeff80000
+#endif
+
+#ifndef CONFIG_RESET_VECTOR_ADDRESS
+#define CONFIG_RESET_VECTOR_ADDRESS	0xeffffffc
+#endif
+
+#define CONFIG_SYS_FSL_CPC		/* Corenet Platform Cache */
+#define CONFIG_SYS_NUM_CPC		CONFIG_NUM_DDR_CONTROLLERS
+#define CONFIG_FSL_IFC			/* Enable IFC Support */
+#define CONFIG_PCI			/* Enable PCI/PCIE */
+#define CONFIG_PCIE1			/* PCIE controler 1 */
+#define CONFIG_PCIE2			/* PCIE controler 2 */
+#define CONFIG_PCIE3			/* PCIE controler 3 */
+#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
+#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
+
+#define CONFIG_SYS_SRIO
+#define CONFIG_SRIO1			/* SRIO port 1 */
+#define CONFIG_SRIO2			/* SRIO port 2 */
+
+#define CONFIG_FSL_LAW			/* Use common FSL init code */
+
+#define CONFIG_ENV_OVERWRITE
+
+#ifdef CONFIG_SYS_NO_FLASH
+#define CONFIG_ENV_IS_NOWHERE
+#else
+#define CONFIG_FLASH_CFI_DRIVER
+#define CONFIG_SYS_FLASH_CFI
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
+#endif
+
+#ifndef CONFIG_SYS_NO_FLASH
+#if defined(CONFIG_SPIFLASH)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_SPI_FLASH
+#define CONFIG_ENV_SPI_BUS              0
+#define CONFIG_ENV_SPI_CS               0
+#define CONFIG_ENV_SPI_MAX_HZ           10000000
+#define CONFIG_ENV_SPI_MODE             0
+#define CONFIG_ENV_SIZE                 0x2000          /* 8KB */
+#define CONFIG_ENV_OFFSET               0x100000        /* 1MB */
+#define CONFIG_ENV_SECT_SIZE            0x10000
+#elif defined(CONFIG_SDCARD)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_MMC
+#define CONFIG_SYS_MMC_ENV_DEV          0
+#define CONFIG_ENV_SIZE			0x2000
+#define CONFIG_ENV_OFFSET		(512 * 1097)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_EXTRA_ENV_RELOC
+#define CONFIG_ENV_IS_IN_NAND
+#define CONFIG_ENV_SIZE			CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET		(5 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#else
+#define CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_SIZE		0x2000
+#define CONFIG_ENV_SECT_SIZE	0x20000 /* 128K (one sector) */
+#endif
+#else /* CONFIG_SYS_NO_FLASH */
+#define CONFIG_ENV_SIZE                0x2000
+#define CONFIG_ENV_SECT_SIZE   0x20000 /* 128K (one sector) */
+#endif
+
+
+
+#define CONFIG_SYS_CLK_FREQ	get_board_sys_clk()
+#define CONFIG_DDR_CLK_FREQ	get_board_ddr_clk()
+
+#ifndef __ASSEMBLY__
+unsigned long get_board_sys_clk(void);
+unsigned long get_board_ddr_clk(void);
+#endif
+
+/*
+ * These can be toggled for performance analysis, otherwise use default.
+ */
+#define CONFIG_SYS_CACHE_STASHING
+#define CONFIG_BTB			/* toggle branch predition */
+#define	CONFIG_DDR_ECC
+#ifdef CONFIG_DDR_ECC
+#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
+#define CONFIG_MEM_INIT_VALUE		0xdeadbeef
+#endif
+
+#define CONFIG_ENABLE_36BIT_PHYS
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_ADDR_MAP
+#define CONFIG_SYS_NUM_ADDR_MAP		64	/* number of TLB1 entries */
+#endif
+
+#if 0
+#define CONFIG_POST CONFIG_SYS_POST_MEMORY	/* test POST memory test */
+#endif
+#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
+#define CONFIG_SYS_MEMTEST_END		0x00400000
+#define CONFIG_SYS_ALT_MEMTEST
+#define CONFIG_PANIC_HANG	/* do not reset board on panic */
+
+/*
+ *  Config the L3 Cache as L3 SRAM
+ */
+#define CONFIG_SYS_INIT_L3_ADDR		CONFIG_RAMBOOT_TEXT_BASE
+
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_DCSRBAR		0xf0000000
+#define CONFIG_SYS_DCSRBAR_PHYS		0xf00000000ull
+#endif
+
+/* EEPROM */
+#define CONFIG_ID_EEPROM
+#define CONFIG_SYS_I2C_EEPROM_NXID
+#define CONFIG_SYS_EEPROM_BUS_NUM	0
+#define CONFIG_SYS_I2C_EEPROM_ADDR	0x57
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	1
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_VERY_BIG_RAM
+#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
+#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
+
+/* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */
+#define CONFIG_DIMM_SLOTS_PER_CTLR	2
+#define CONFIG_CHIP_SELECTS_PER_CTRL	4
+#define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
+
+#define CONFIG_DDR_SPD
+#define CONFIG_FSL_DDR3
+
+#define CONFIG_SYS_SPD_BUS_NUM	0
+#define SPD_EEPROM_ADDRESS1	0x51
+#define SPD_EEPROM_ADDRESS2	0x52
+#define SPD_EEPROM_ADDRESS3	0x53
+#define SPD_EEPROM_ADDRESS4	0x54
+#define SPD_EEPROM_ADDRESS5	0x55
+#define SPD_EEPROM_ADDRESS6	0x56
+#define SPD_EEPROM_ADDRESS	SPD_EEPROM_ADDRESS1	/* for p3041/p5010 */
+#define CONFIG_SYS_SDRAM_SIZE	4096	/* for fixed parameter use */
+
+/*
+ * IFC Definitions
+ */
+#define CONFIG_SYS_FLASH_BASE	0xe0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_FLASH_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_FLASH_BASE)
+#else
+#define CONFIG_SYS_FLASH_BASE_PHYS	CONFIG_SYS_FLASH_BASE
+#endif
+
+#define CONFIG_SYS_NOR0_CSPR_EXT	(0xf)
+#define CONFIG_SYS_NOR0_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \
+				+ 0x8000000) | \
+				CSPR_PORT_SIZE_16 | \
+				CSPR_MSEL_NOR | \
+				CSPR_V)
+#define CONFIG_SYS_NOR1_CSPR_EXT	(0xf)
+#define CONFIG_SYS_NOR1_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \
+				CSPR_PORT_SIZE_16 | \
+				CSPR_MSEL_NOR | \
+				CSPR_V)
+#define CONFIG_SYS_NOR_AMASK	IFC_AMASK(128*1024*1024)
+/* NOR Flash Timing Params */
+#define CONFIG_SYS_NOR_CSOR	CSOR_NAND_TRHZ_80
+
+#define CONFIG_SYS_NOR_FTIM0	(FTIM0_NOR_TACSE(0x01) | \
+				FTIM0_NOR_TEADC(0x01) | \
+				FTIM0_NOR_TEAHC(0x20))
+#define CONFIG_SYS_NOR_FTIM1	(FTIM1_NOR_TACO(0x35) | \
+				FTIM1_NOR_TRAD_NOR(0x1A) |\
+				FTIM1_NOR_TSEQRAD_NOR(0x13))
+#define CONFIG_SYS_NOR_FTIM2	(FTIM2_NOR_TCS(0x01) | \
+				FTIM2_NOR_TCH(0x0E) | \
+				FTIM2_NOR_TWPH(0x0E) | \
+				FTIM2_NOR_TWP(0x1c))
+#define CONFIG_SYS_NOR_FTIM3	0x0
+
+#define CONFIG_SYS_FLASH_QUIET_TEST
+#define CONFIG_FLASH_SHOW_PROGRESS	45 /* count down from 45/5: 9..1 */
+
+#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* number of banks */
+#define CONFIG_SYS_MAX_FLASH_SECT	1024	/* sectors per device */
+#define CONFIG_SYS_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CONFIG_SYS_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CONFIG_SYS_FLASH_EMPTY_INFO
+#define CONFIG_SYS_FLASH_BANKS_LIST	{CONFIG_SYS_FLASH_BASE_PHYS \
+					+ 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS}
+
+#define CONFIG_FSL_QIXIS	/* use common QIXIS code */
+#define QIXIS_BASE			0xffdf0000
+#define QIXIS_LBMAP_SWITCH		6
+#define QIXIS_LBMAP_MASK		0x0f
+#define QIXIS_LBMAP_SHIFT		0
+#define QIXIS_LBMAP_DFLTBANK		0x00
+#define QIXIS_LBMAP_ALTBANK		0x04
+#define QIXIS_RST_CTL_RESET		0x83
+#define QIXIS_RCFG_CTL_RECONFIG_IDLE	0x20
+#define QIXIS_RCFG_CTL_RECONFIG_START	0x21
+#define QIXIS_RCFG_CTL_WATCHDOG_ENBLE	0x08
+#ifdef CONFIG_PHYS_64BIT
+#define QIXIS_BASE_PHYS		(0xf00000000ull | QIXIS_BASE)
+#else
+#define QIXIS_BASE_PHYS		QIXIS_BASE
+#endif
+
+#define CONFIG_SYS_CSPR3_EXT	(0xf)
+#define CONFIG_SYS_CSPR3	(CSPR_PHYS_ADDR(QIXIS_BASE_PHYS) \
+				| CSPR_PORT_SIZE_8 \
+				| CSPR_MSEL_GPCM \
+				| CSPR_V)
+#define CONFIG_SYS_AMASK3	IFC_AMASK(64*1024)
+#define CONFIG_SYS_CSOR3	0x0
+/* QIXIS Timing parameters for IFC CS3 */
+#define CONFIG_SYS_CS3_FTIM0		(FTIM0_GPCM_TACSE(0x0e) | \
+					FTIM0_GPCM_TEADC(0x0e) | \
+					FTIM0_GPCM_TEAHC(0x0e))
+#define CONFIG_SYS_CS3_FTIM1		(FTIM1_GPCM_TACO(0xff) | \
+					FTIM1_GPCM_TRAD(0x3f))
+#define CONFIG_SYS_CS3_FTIM2		(FTIM2_GPCM_TCS(0x0e) | \
+					FTIM2_GPCM_TCH(0x0) | \
+					FTIM2_GPCM_TWP(0x1f))
+#define CONFIG_SYS_CS3_FTIM3		0x0
+
+/* NAND Flash on IFC */
+#define CONFIG_NAND_FSL_IFC
+#define CONFIG_SYS_NAND_BASE		0xff800000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_NAND_BASE_PHYS	(0xf00000000ull | CONFIG_SYS_NAND_BASE)
+#else
+#define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
+#endif
+
+#define CONFIG_SYS_NAND_CSPR_EXT	(0xf)
+#define CONFIG_SYS_NAND_CSPR	(CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \
+				| CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \
+				| CSPR_MSEL_NAND	/* MSEL = NAND */ \
+				| CSPR_V)
+#define CONFIG_SYS_NAND_AMASK	IFC_AMASK(64*1024)
+
+#define CONFIG_SYS_NAND_CSOR    (CSOR_NAND_ECC_ENC_EN   /* ECC on encode */ \
+				| CSOR_NAND_ECC_DEC_EN  /* ECC on decode */ \
+				| CSOR_NAND_ECC_MODE_4  /* 4-bit ECC */ \
+				| CSOR_NAND_RAL_3	/* RAL = 2Byes */ \
+				| CSOR_NAND_PGS_2K	/* Page Size = 2K */ \
+				| CSOR_NAND_SPRZ_64/* Spare size = 64 */ \
+				| CSOR_NAND_PB(64))	/*Pages Per Block = 64*/
+
+#define CONFIG_SYS_NAND_ONFI_DETECTION
+
+/* ONFI NAND Flash mode0 Timing Params */
+#define CONFIG_SYS_NAND_FTIM0		(FTIM0_NAND_TCCST(0x07) | \
+					FTIM0_NAND_TWP(0x18)   | \
+					FTIM0_NAND_TWCHT(0x07) | \
+					FTIM0_NAND_TWH(0x0a))
+#define CONFIG_SYS_NAND_FTIM1		(FTIM1_NAND_TADLE(0x32) | \
+					FTIM1_NAND_TWBE(0x39)  | \
+					FTIM1_NAND_TRR(0x0e)   | \
+					FTIM1_NAND_TRP(0x18))
+#define CONFIG_SYS_NAND_FTIM2		(FTIM2_NAND_TRAD(0x0f) | \
+					FTIM2_NAND_TREH(0x0a) | \
+					FTIM2_NAND_TWHRE(0x1e))
+#define CONFIG_SYS_NAND_FTIM3		0x0
+
+#define CONFIG_SYS_NAND_DDR_LAW		11
+
+#define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE }
+#define CONFIG_SYS_MAX_NAND_DEVICE	1
+#define CONFIG_MTD_NAND_VERIFY_WRITE
+#define CONFIG_CMD_NAND
+
+#define CONFIG_SYS_NAND_BLOCK_SIZE	(128 * 1024)
+
+#if defined(CONFIG_NAND)
+#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NAND_FTIM3
+#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR2		CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK2		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR2		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NOR_FTIM3
+#else
+#define CONFIG_SYS_CSPR0_EXT		CONFIG_SYS_NOR0_CSPR_EXT
+#define CONFIG_SYS_CSPR0		CONFIG_SYS_NOR0_CSPR
+#define CONFIG_SYS_AMASK0		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR0		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS0_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS0_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS0_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS0_FTIM3		CONFIG_SYS_NOR_FTIM3
+#define CONFIG_SYS_CSPR2_EXT		CONFIG_SYS_NAND_CSPR_EXT
+#define CONFIG_SYS_CSPR2		CONFIG_SYS_NAND_CSPR
+#define CONFIG_SYS_AMASK2		CONFIG_SYS_NAND_AMASK
+#define CONFIG_SYS_CSOR2		CONFIG_SYS_NAND_CSOR
+#define CONFIG_SYS_CS2_FTIM0		CONFIG_SYS_NAND_FTIM0
+#define CONFIG_SYS_CS2_FTIM1		CONFIG_SYS_NAND_FTIM1
+#define CONFIG_SYS_CS2_FTIM2		CONFIG_SYS_NAND_FTIM2
+#define CONFIG_SYS_CS2_FTIM3		CONFIG_SYS_NAND_FTIM3
+#endif
+#define CONFIG_SYS_CSPR1_EXT		CONFIG_SYS_NOR1_CSPR_EXT
+#define CONFIG_SYS_CSPR1		CONFIG_SYS_NOR1_CSPR
+#define CONFIG_SYS_AMASK1		CONFIG_SYS_NOR_AMASK
+#define CONFIG_SYS_CSOR1		CONFIG_SYS_NOR_CSOR
+#define CONFIG_SYS_CS1_FTIM0		CONFIG_SYS_NOR_FTIM0
+#define CONFIG_SYS_CS1_FTIM1		CONFIG_SYS_NOR_FTIM1
+#define CONFIG_SYS_CS1_FTIM2		CONFIG_SYS_NOR_FTIM2
+#define CONFIG_SYS_CS1_FTIM3		CONFIG_SYS_NOR_FTIM3
+
+#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
+
+#if defined(CONFIG_RAMBOOT_PBL)
+#define CONFIG_SYS_RAMBOOT
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_R	/* call board_early_init_r function */
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_HWCONFIG
+
+/* define to use L1 as initial stack */
+#define CONFIG_L1_INIT_RAM
+#define CONFIG_SYS_INIT_RAM_LOCK
+#define CONFIG_SYS_INIT_RAM_ADDR	0xfdd00000	/* Initial L1 address */
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0xf
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW	0xfe0ec000
+/* The assembler doesn't like typecast */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
+	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
+	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
+#else
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS	0xfe0ec000 /* Initial L1 address */
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0
+#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS
+#endif
+#define CONFIG_SYS_INIT_RAM_SIZE		0x00004000
+
+#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
+					GENERATED_GBL_DATA_SIZE)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
+#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)
+
+/* Serial Port - controlled on board with jumper J8
+ * open - index 2
+ * shorted - index 1
+ */
+#define CONFIG_CONS_INDEX	1
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE	1
+#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0)/2)
+
+#define CONFIG_SYS_BAUDRATE_TABLE	\
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x11C500)
+#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x11C600)
+#define CONFIG_SYS_NS16550_COM3	(CONFIG_SYS_CCSRBAR+0x11D500)
+#define CONFIG_SYS_NS16550_COM4	(CONFIG_SYS_CCSRBAR+0x11D600)
+
+/* Use the HUSH parser */
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
+
+/* pass open firmware flat tree */
+#define CONFIG_OF_LIBFDT
+#define CONFIG_OF_BOARD_SETUP
+#define CONFIG_OF_STDOUT_VIA_ALIAS
+
+/* new uImage format support */
+#define CONFIG_FIT
+#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */
+
+/* I2C */
+#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
+#define CONFIG_HARD_I2C		/* I2C with hardware support */
+#define CONFIG_I2C_MULTI_BUS
+#define CONFIG_I2C_CMD_TREE
+#define CONFIG_SYS_I2C_SPEED		100000	/* I2C speed */
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x118000
+#define CONFIG_SYS_I2C2_OFFSET		0x118100
+#define I2C_MUX_PCA_ADDR_PRI		0x77 /* I2C bus multiplexer,primary */
+#define I2C_MUX_PCA_ADDR_SEC		0x76 /* I2C bus multiplexer,secondary */
+
+/* VSC Crossbar switches */
+#define CONFIG_VSC_CROSSBAR
+#define I2C_MUX_CH_DEFAULT	0x8
+#define I2C_MUX_CH_VSC3316_FS	0xc
+#define I2C_MUX_CH_VSC3316_BS	0xd
+#define VSC3316_FSM_TX_ADDR	0x70
+#define VSC3316_FSM_RX_ADDR	0x71
+
+/*
+ * RapidIO
+ */
+#define CONFIG_SYS_SRIO1_MEM_VIRT	0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO1_MEM_PHYS	0xc20000000ull
+#else
+#define CONFIG_SYS_SRIO1_MEM_PHYS	0xa0000000
+#endif
+#define CONFIG_SYS_SRIO1_MEM_SIZE	0x10000000	/* 256M */
+
+#define CONFIG_SYS_SRIO2_MEM_VIRT	0xb0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_SRIO2_MEM_PHYS	0xc30000000ull
+#else
+#define CONFIG_SYS_SRIO2_MEM_PHYS	0xb0000000
+#endif
+#define CONFIG_SYS_SRIO2_MEM_SIZE	0x10000000	/* 256M */
+
+/*
+ * for slave u-boot IMAGE instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef080000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff80000ull
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x80000	/* 512K */
+#define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff80000ull
+/*
+ * for slave UCODE and ENV instored in master memory space,
+ * PHYS must be aligned based on the SIZE
+ */
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef040000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull
+#define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000	/* 256K */
+
+/* slave core release by master*/
+#define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4
+#define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */
+
+/*
+ * SRIO_PCIE_BOOT - SLAVE
+ */
+#ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000
+#define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \
+		(0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR)
+#endif
+/*
+ * eSPI - Enhanced SPI
+ */
+#define CONFIG_FSL_ESPI
+#define CONFIG_SPI_FLASH
+#define CONFIG_SPI_FLASH_SPANSION
+#define CONFIG_CMD_SF
+#define CONFIG_SF_DEFAULT_SPEED         10000000
+#define CONFIG_SF_DEFAULT_MODE          0
+
+/*
+ * General PCI
+ * Memory space is mapped 1-1, but I/O space must start from 0.
+ */
+
+/* controller 1, direct to uli, tgtid 3, Base address 20000 */
+#define CONFIG_SYS_PCIE1_MEM_VIRT	0x80000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0xc00000000ull
+#else
+#define CONFIG_SYS_PCIE1_MEM_BUS	0x80000000
+#define CONFIG_SYS_PCIE1_MEM_PHYS	0x80000000
+#endif
+#define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE1_IO_VIRT	0xf8000000
+#define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xff8000000ull
+#else
+#define CONFIG_SYS_PCIE1_IO_PHYS	0xf8000000
+#endif
+#define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */
+
+/* controller 2, Slot 2, tgtid 2, Base address 201000 */
+#define CONFIG_SYS_PCIE2_MEM_VIRT	0xa0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0xc20000000ull
+#else
+#define CONFIG_SYS_PCIE2_MEM_BUS	0xa0000000
+#define CONFIG_SYS_PCIE2_MEM_PHYS	0xa0000000
+#endif
+#define CONFIG_SYS_PCIE2_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE2_IO_VIRT	0xf8010000
+#define CONFIG_SYS_PCIE2_IO_BUS		0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xff8010000ull
+#else
+#define CONFIG_SYS_PCIE2_IO_PHYS	0xf8010000
+#endif
+#define CONFIG_SYS_PCIE2_IO_SIZE	0x00010000	/* 64k */
+
+/* controller 3, Slot 1, tgtid 1, Base address 202000 */
+#define CONFIG_SYS_PCIE3_MEM_VIRT	0xc0000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc40000000ull
+#else
+#define CONFIG_SYS_PCIE3_MEM_BUS	0xc0000000
+#define CONFIG_SYS_PCIE3_MEM_PHYS	0xc0000000
+#endif
+#define CONFIG_SYS_PCIE3_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE3_IO_VIRT	0xf8020000
+#define CONFIG_SYS_PCIE3_IO_BUS		0x00000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_PCIE3_IO_PHYS	0xff8020000ull
+#else
+#define CONFIG_SYS_PCIE3_IO_PHYS	0xf8020000
+#endif
+#define CONFIG_SYS_PCIE3_IO_SIZE	0x00010000	/* 64k */
+
+/* controller 4, Base address 203000 */
+#define CONFIG_SYS_PCIE4_MEM_BUS	0xe0000000
+#define CONFIG_SYS_PCIE4_MEM_PHYS	0xc60000000ull
+#define CONFIG_SYS_PCIE4_MEM_SIZE	0x20000000	/* 512M */
+#define CONFIG_SYS_PCIE4_IO_BUS		0x00000000
+#define CONFIG_SYS_PCIE4_IO_PHYS	0xff8030000ull
+#define CONFIG_SYS_PCIE4_IO_SIZE	0x00010000	/* 64k */
+
+/* Qman/Bman */
+#ifndef CONFIG_NOBQFMAN
+#define CONFIG_SYS_DPAA_QBMAN		/* Support Q/Bman */
+#define CONFIG_SYS_BMAN_NUM_PORTALS	50
+#define CONFIG_SYS_BMAN_MEM_BASE	0xf4000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_BMAN_MEM_PHYS	0xff4000000ull
+#else
+#define CONFIG_SYS_BMAN_MEM_PHYS	CONFIG_SYS_BMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_BMAN_MEM_SIZE	0x02000000
+#define CONFIG_SYS_QMAN_NUM_PORTALS	50
+#define CONFIG_SYS_QMAN_MEM_BASE	0xf6000000
+#ifdef CONFIG_PHYS_64BIT
+#define CONFIG_SYS_QMAN_MEM_PHYS	0xff6000000ull
+#else
+#define CONFIG_SYS_QMAN_MEM_PHYS	CONFIG_SYS_QMAN_MEM_BASE
+#endif
+#define CONFIG_SYS_QMAN_MEM_SIZE	0x02000000
+
+#define CONFIG_SYS_DPAA_FMAN
+#define CONFIG_SYS_DPAA_PME
+#define CONFIG_SYS_PMAN
+#define CONFIG_SYS_DPAA_DCE
+#define CONFIG_SYS_INTERLAKEN
+
+/* Default address of microcode for the Linux Fman driver */
+#if defined(CONFIG_SPIFLASH)
+/*
+ * env is stored at 0x100000, sector size is 0x10000, ucode is stored after
+ * env, so we got 0x110000.
+ */
+#define CONFIG_SYS_QE_FW_IN_SPIFLASH
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	0x110000
+#elif defined(CONFIG_SDCARD)
+/*
+ * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is
+ * about 545KB (1089 blocks), Env is stored after the image, and the env size is
+ * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130.
+ */
+#define CONFIG_SYS_QE_FMAN_FW_IN_MMC
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	(512 * 1130)
+#elif defined(CONFIG_NAND)
+#define CONFIG_SYS_QE_FMAN_FW_IN_NAND
+#define CONFIG_SYS_QE_FMAN_FW_ADDR	(6 * CONFIG_SYS_NAND_BLOCK_SIZE)
+#else
+#define CONFIG_SYS_QE_FMAN_FW_IN_NOR
+#define CONFIG_SYS_QE_FMAN_FW_ADDR		0xEFF40000
+#endif
+#define CONFIG_SYS_QE_FMAN_FW_LENGTH	0x10000
+#define CONFIG_SYS_FDT_PAD		(0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH)
+#endif /* CONFIG_NOBQFMAN */
+
+#ifdef CONFIG_SYS_DPAA_FMAN
+#define CONFIG_FMAN_ENET
+#define CONFIG_PHYLIB_10G
+#define CONFIG_PHY_VITESSE
+#define CONFIG_PHY_TERANETICS
+#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
+#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
+#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
+#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
+#define XFI_CARD_PORT1_PHY_ADDR	0x1 /* tmp, FIXME below addr */
+#define XFI_CARD_PORT2_PHY_ADDR	0x2
+#define XFI_CARD_PORT3_PHY_ADDR	0x3
+#define XFI_CARD_PORT4_PHY_ADDR	0x4
+#define QSGMII_CARD_PHY_ADDR	0x5
+#define FM1_10GEC1_PHY_ADDR	0x6
+#define FM1_10GEC2_PHY_ADDR	0x7
+#define FM2_10GEC1_PHY_ADDR	0x8
+#define FM2_10GEC2_PHY_ADDR	0x9
+#endif
+
+#ifdef CONFIG_PCI
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP			/* do pci plug-and-play */
+#define CONFIG_E1000
+
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CONFIG_DOS_PARTITION
+#endif	/* CONFIG_PCI */
+
+/* SATA */
+#ifdef CONFIG_FSL_SATA_V2
+#define CONFIG_LIBATA
+#define CONFIG_FSL_SATA
+
+#define CONFIG_SYS_SATA_MAX_DEVICE	2
+#define CONFIG_SATA1
+#define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
+#define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
+#define CONFIG_SATA2
+#define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
+#define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA
+
+#define CONFIG_LBA48
+#define CONFIG_CMD_SATA
+#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_EXT2
+#endif
+
+#ifdef CONFIG_FMAN_ENET
+#define CONFIG_MII		/* MII PHY management */
+#define CONFIG_ETHPRIME		"FM1@DTSEC1"
+#define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */
+#endif
+
+/*
+ * Environment
+ */
+#define CONFIG_LOADS_ECHO		/* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE	/* allow baudrate change */
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_ERRATA
+#define CONFIG_CMD_GREPENV
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_SETEXPR
+
+#ifdef CONFIG_PCI
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_NET
+#endif
+
+/*
+* USB
+*/
+#define CONFIG_CMD_USB
+#define CONFIG_USB_STORAGE
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_FSL
+#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
+#define CONFIG_CMD_EXT2
+#define CONFIG_HAS_FSL_DR_USB
+
+#define CONFIG_MMC
+
+#ifdef CONFIG_MMC
+#define CONFIG_FSL_ESDHC
+#define CONFIG_SYS_FSL_ESDHC_ADDR       CONFIG_SYS_MPC85xx_ESDHC_ADDR
+#define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT
+#define CONFIG_CMD_MMC
+#define CONFIG_GENERIC_MMC
+#define CONFIG_CMD_EXT2
+#define CONFIG_CMD_FAT
+#define CONFIG_DOS_PARTITION
+#endif
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
+#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
+#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
+#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
+#define CONFIG_SYS_PROMPT	"=> "		/* Monitor Command Prompt */
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
+#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
+#define CONFIG_SYS_HZ		1000		/* decrementer freq: 1ms ticks*/
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 64 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
+#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */
+
+#ifdef CONFIG_CMD_KGDB
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ROOTPATH		"/opt/nfsroot"
+#define CONFIG_BOOTFILE		"uImage"
+#define CONFIG_UBOOTPATH	"u-boot.bin"	/* U-Boot image on TFTP server*/
+
+/* default location for tftp and bootm */
+#define CONFIG_LOADADDR		1000000
+
+#define CONFIG_BOOTDELAY	10	/* -1 disables auto-boot */
+
+#define CONFIG_BAUDRATE	115200
+
+#define __USB_PHY_TYPE	utmi
+
+#define	CONFIG_EXTRA_ENV_SETTINGS				\
+	"hwconfig=fsl_ddr:ctlr_intlv=3way_4KB,"		\
+	"bank_intlv=auto;"					\
+	"usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\
+	"netdev=eth0\0"						\
+	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"			\
+	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"		\
+	"tftpflash=tftpboot $loadaddr $uboot && "		\
+	"protect off $ubootaddr +$filesize && "			\
+	"erase $ubootaddr +$filesize && "			\
+	"cp.b $loadaddr $ubootaddr $filesize && "		\
+	"protect on $ubootaddr +$filesize && "			\
+	"cmp.b $loadaddr $ubootaddr $filesize\0"		\
+	"consoledev=ttyS0\0"					\
+	"ramdiskaddr=2000000\0"					\
+	"ramdiskfile=t4240qds/ramdisk.uboot\0"			\
+	"fdtaddr=c00000\0"					\
+	"fdtfile=t4240qds/t4240qds.dtb\0"				\
+	"bdev=sda3\0"						\
+	"c=ffe\0"
+
+/* For emulation this causes u-boot to jump to the start of the proof point
+   app code automatically */
+#define CONFIG_PROOF_POINTS			\
+ "setenv bootargs root=/dev/$bdev rw "		\
+ "console=$consoledev,$baudrate $othbootargs;"	\
+ "cpu 1 release 0x29000000 - - -;"		\
+ "cpu 2 release 0x29000000 - - -;"		\
+ "cpu 3 release 0x29000000 - - -;"		\
+ "cpu 4 release 0x29000000 - - -;"		\
+ "cpu 5 release 0x29000000 - - -;"		\
+ "cpu 6 release 0x29000000 - - -;"		\
+ "cpu 7 release 0x29000000 - - -;"		\
+ "go 0x29000000"
+
+#define CONFIG_HVBOOT				\
+ "setenv bootargs config-addr=0x60000000; "	\
+ "bootm 0x01000000 - 0x00f00000"
+
+#define CONFIG_ALU				\
+ "setenv bootargs root=/dev/$bdev rw "		\
+ "console=$consoledev,$baudrate $othbootargs;"	\
+ "cpu 1 release 0x01000000 - - -;"		\
+ "cpu 2 release 0x01000000 - - -;"		\
+ "cpu 3 release 0x01000000 - - -;"		\
+ "cpu 4 release 0x01000000 - - -;"		\
+ "cpu 5 release 0x01000000 - - -;"		\
+ "cpu 6 release 0x01000000 - - -;"		\
+ "cpu 7 release 0x01000000 - - -;"		\
+ "go 0x01000000"
+
+#define CONFIG_LINUX				\
+ "setenv bootargs root=/dev/ram rw "		\
+ "console=$consoledev,$baudrate $othbootargs;"	\
+ "setenv ramdiskaddr 0x02000000;"		\
+ "setenv fdtaddr 0x00c00000;"			\
+ "setenv loadaddr 0x1000000;"			\
+ "bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_HDBOOT					\
+	"setenv bootargs root=/dev/$bdev rw "		\
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftp $loadaddr $bootfile;"			\
+	"tftp $fdtaddr $fdtfile;"			\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_NFSBOOTCOMMAND			\
+	"setenv bootargs root=/dev/nfs rw "	\
+	"nfsroot=$serverip:$rootpath "		\
+	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftp $loadaddr $bootfile;"		\
+	"tftp $fdtaddr $fdtfile;"		\
+	"bootm $loadaddr - $fdtaddr"
+
+#define CONFIG_RAMBOOTCOMMAND				\
+	"setenv bootargs root=/dev/ram rw "		\
+	"console=$consoledev,$baudrate $othbootargs;"	\
+	"tftp $ramdiskaddr $ramdiskfile;"		\
+	"tftp $loadaddr $bootfile;"			\
+	"tftp $fdtaddr $fdtfile;"			\
+	"bootm $loadaddr $ramdiskaddr $fdtaddr"
+
+#define CONFIG_BOOTCOMMAND		CONFIG_LINUX
+
+#ifdef CONFIG_SECURE_BOOT
+#include <asm/fsl_secure_boot.h>
+#endif
+
+#endif	/* __CONFIG_H */
diff --git a/include/configs/tegra-common-post.h b/include/configs/tegra-common-post.h
index 9698c23..6835155 100644
--- a/include/configs/tegra-common-post.h
+++ b/include/configs/tegra-common-post.h
@@ -95,8 +95,6 @@
 #endif
 
 #define BOOTCMDS_COMMON \
-	"scriptaddr=0x400000\0" \
-	\
 	"rootpart=1\0" \
 	\
 	"script_boot="                                                    \
@@ -140,10 +138,36 @@
 
 #endif
 
+/*
+ * Memory layout for where various images get loaded by boot scripts:
+ *
+ * scriptaddr can be pretty much anywhere that doesn't conflict with something
+ *   else. Put it above BOOTMAPSZ to eliminate conflicts.
+ *
+ * kernel_addr_r must be within the first 128M of RAM in order for the
+ *   kernel's CONFIG_AUTO_ZRELADDR option to work. Since the kernel will
+ *   decompress itself to 0x8000 after the start of RAM, kernel_addr_r
+ *   should not overlap that area, or the kernel will have to copy itself
+ *   somewhere else before decompression. Similarly, the address of any other
+ *   data passed to the kernel shouldn't overlap the start of RAM. Pushing
+ *   this up to 16M allows for a sizable kernel to be decompressed below the
+ *   compressed load address.
+ *
+ * fdt_addr_r simply shouldn't overlap anything else. Choosing 32M allows for
+ *   the compressed kernel to be up to 16M too.
+ *
+ * ramdisk_addr_r simply shouldn't overlap anything else. Choosing 33M allows
+ *   for the FDT/DTB to be up to 1M, which is hopefully plenty.
+ */
+#define MEM_LAYOUT_ENV_SETTINGS \
+	"scriptaddr=0x10000000\0" \
+	"kernel_addr_r=0x01000000\0" \
+	"fdt_addr_r=0x02000000\0" \
+	"ramdisk_addr_r=0x02100000\0" \
+
 #define CONFIG_EXTRA_ENV_SETTINGS \
 	TEGRA_DEVICE_SETTINGS \
-	"fdt_load=0x01000000\0" \
-	"fdt_high=01100000\0" \
+	MEM_LAYOUT_ENV_SETTINGS \
 	BOOTCMDS_COMMON
 
 /* overrides for SPL build here */
diff --git a/include/configs/tegra20-common.h b/include/configs/tegra20-common.h
index dc7444d..15bd9bb 100644
--- a/include/configs/tegra20-common.h
+++ b/include/configs/tegra20-common.h
@@ -169,8 +169,11 @@
 #define PHYS_SDRAM_1_SIZE	0x20000000	/* 512M */
 
 #define CONFIG_SYS_TEXT_BASE	0x0010c000
+#define CONFIG_SYS_UBOOT_START	CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM_1
 
+#define CONFIG_SYS_BOOTMAPSZ	(256 << 20) /* 256M */
+
 #define CONFIG_SYS_INIT_RAM_ADDR	CONFIG_STACKBASE
 #define CONFIG_SYS_INIT_RAM_SIZE	CONFIG_SYS_MALLOC_LEN
 #define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
@@ -184,9 +187,13 @@
 
 /* Defines for SPL */
 #define CONFIG_SPL
+#define CONFIG_SPL_FRAMEWORK
+#define CONFIG_SPL_RAM_DEVICE
+#define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_NAND_SIMPLE
 #define CONFIG_SPL_TEXT_BASE		0x00108000
-#define CONFIG_SPL_MAX_SIZE		0x00004000
+#define CONFIG_SPL_MAX_SIZE		(CONFIG_SYS_TEXT_BASE - \
+						CONFIG_SPL_TEXT_BASE)
 #define CONFIG_SYS_SPL_MALLOC_START	0x00090000
 #define CONFIG_SYS_SPL_MALLOC_SIZE	0x00010000
 #define CONFIG_SPL_STACK		0x000ffffc
@@ -198,5 +205,6 @@
 #define CONFIG_SPL_LDSCRIPT		"$(CPUDIR)/tegra20/u-boot-spl.lds"
 
 #define CONFIG_SYS_NAND_SELF_INIT
+#define CONFIG_SYS_NAND_ONFI_DETECTION
 
 #endif /* __TEGRA20_COMMON_H */
diff --git a/include/configs/tnetv107x_evm.h b/include/configs/tnetv107x_evm.h
index 23cab88..d6371fc 100644
--- a/include/configs/tnetv107x_evm.h
+++ b/include/configs/tnetv107x_evm.h
@@ -32,6 +32,7 @@
 #define CONFIG_ARM1176
 #define CONFIG_TNETV107X
 #define CONFIG_TNETV107X_EVM
+#define CONFIG_TNETV107X_WATCHDOG
 #define CONFIG_ARCH_CPU_INIT
 #define CONFIG_SYS_UBOOT_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_DISABLE_TCM
diff --git a/include/configs/tricorder.h b/include/configs/tricorder.h
index 00d02e8..5859a73 100644
--- a/include/configs/tricorder.h
+++ b/include/configs/tricorder.h
@@ -201,7 +201,7 @@
 		"run nandargs; " \
 		"run loaduimage_ubi; " \
 		"bootm ${loadaddr}\0" \
-	"autoboot=if mmc rescan ${mmcdev}; then " \
+	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
 			"if run loadbootscript; then " \
 				"run bootscript; " \
 			"else " \
diff --git a/include/configs/trizepsiv.h b/include/configs/trizepsiv.h
index bc69c1e..c1bfe31 100644
--- a/include/configs/trizepsiv.h
+++ b/include/configs/trizepsiv.h
@@ -170,7 +170,8 @@
 #define CONFIG_SYS_CPUSPEED		0x207		/* need to look more closely, I think this is Turbo = 2x, L=91Mhz */
 
 #ifdef CONFIG_MMC
-#define CONFIG_PXA_MMC
+#define	CONFIG_GENERIC_MMC
+#define	CONFIG_PXA_MMC_GENERIC
 #define CONFIG_CMD_MMC
 #define CONFIG_SYS_MMC_BASE		0xF0000000
 #endif
diff --git a/include/configs/uc100.h b/include/configs/uc100.h
index 8c8fb5a..450c98b 100644
--- a/include/configs/uc100.h
+++ b/include/configs/uc100.h
@@ -331,6 +331,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/configs/versatile.h b/include/configs/versatile.h
index 38f5302..a65c676 100644
--- a/include/configs/versatile.h
+++ b/include/configs/versatile.h
@@ -230,6 +230,7 @@
 #define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
 
+#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
 #endif
 
 #endif	/* __CONFIG_H */
diff --git a/include/configs/virtlab2.h b/include/configs/virtlab2.h
index 4bb96cc..c2c0d1d 100644
--- a/include/configs/virtlab2.h
+++ b/include/configs/virtlab2.h
@@ -329,6 +329,7 @@
  *-----------------------------------------------------------------------
  */
 
+#define CONFIG_IDE_PREINIT	1	/* Use preinit IDE hook */
 #define	CONFIG_IDE_8xx_PCCARD	1	/* Use IDE with PC Card	Adapter	*/
 
 #undef	CONFIG_IDE_8xx_DIRECT		/* Direct IDE    not supported	*/
diff --git a/include/dwmmc.h b/include/dwmmc.h
new file mode 100644
index 0000000..c8b1d40
--- /dev/null
+++ b/include/dwmmc.h
@@ -0,0 +1,191 @@
+/*
+ * (C) Copyright 2012 SAMSUNG Electronics
+ * Jaehoon Chung <jh80.chung@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,  MA 02111-1307 USA
+ *
+ */
+
+#ifndef __DWMMC_HW_H
+#define __DWMMC_HW_H
+
+#include <asm/io.h>
+#include <mmc.h>
+
+#define DWMCI_CTRL		0x000
+#define	DWMCI_PWREN		0x004
+#define DWMCI_CLKDIV		0x008
+#define DWMCI_CLKSRC		0x00C
+#define DWMCI_CLKENA		0x010
+#define DWMCI_TMOUT		0x014
+#define DWMCI_CTYPE		0x018
+#define DWMCI_BLKSIZ		0x01C
+#define DWMCI_BYTCNT		0x020
+#define DWMCI_INTMASK		0x024
+#define DWMCI_CMDARG		0x028
+#define DWMCI_CMD		0x02C
+#define DWMCI_RESP0		0x030
+#define DWMCI_RESP1		0x034
+#define DWMCI_RESP2		0x038
+#define DWMCI_RESP3		0x03C
+#define DWMCI_MINTSTS		0x040
+#define DWMCI_RINTSTS		0x044
+#define DWMCI_STATUS		0x048
+#define DWMCI_FIFOTH		0x04C
+#define DWMCI_CDETECT		0x050
+#define DWMCI_WRTPRT		0x054
+#define DWMCI_GPIO		0x058
+#define DWMCI_TCMCNT		0x05C
+#define DWMCI_TBBCNT		0x060
+#define DWMCI_DEBNCE		0x064
+#define DWMCI_USRID		0x068
+#define DWMCI_VERID		0x06C
+#define DWMCI_HCON		0x070
+#define DWMCI_UHS_REG		0x074
+#define DWMCI_BMOD		0x080
+#define DWMCI_PLDMND		0x084
+#define DWMCI_DBADDR		0x088
+#define DWMCI_IDSTS		0x08C
+#define DWMCI_IDINTEN		0x090
+#define DWMCI_DSCADDR		0x094
+#define DWMCI_BUFADDR		0x098
+#define DWMCI_DATA		0x200
+
+/* Interrupt Mask register */
+#define DWMCI_INTMSK_ALL	0xffffffff
+#define DWMCI_INTMSK_RE		(1 << 1)
+#define DWMCI_INTMSK_CDONE	(1 << 2)
+#define DWMCI_INTMSK_DTO	(1 << 3)
+#define DWMCI_INTMSK_TXDR	(1 << 4)
+#define DWMCI_INTMSK_RXDR	(1 << 5)
+#define DWMCI_INTMSK_DCRC	(1 << 7)
+#define DWMCI_INTMSK_RTO	(1 << 8)
+#define DWMCI_INTMSK_DRTO	(1 << 9)
+#define DWMCI_INTMSK_HTO	(1 << 10)
+#define DWMCI_INTMSK_FRUN	(1 << 11)
+#define DWMCI_INTMSK_HLE	(1 << 12)
+#define DWMCI_INTMSK_SBE	(1 << 13)
+#define DWMCI_INTMSK_ACD	(1 << 14)
+#define DWMCI_INTMSK_EBE	(1 << 15)
+
+/* Raw interrupt Regsiter */
+#define DWMCI_DATA_ERR	(DWMCI_INTMSK_EBE | DWMCI_INTMSK_SBE | DWMCI_INTMSK_HLE |\
+			DWMCI_INTMSK_FRUN | DWMCI_INTMSK_EBE | DWMCI_INTMSK_DCRC)
+#define DWMCI_DATA_TOUT	(DWMCI_INTMSK_HTO | DWMCI_INTMSK_DRTO)
+/* CTRL register */
+#define DWMCI_CTRL_RESET	(1 << 0)
+#define DWMCI_CTRL_FIFO_RESET	(1 << 1)
+#define DWMCI_CTRL_DMA_RESET	(1 << 2)
+#define DWMCI_DMA_EN		(1 << 5)
+#define DWMCI_CTRL_SEND_AS_CCSD	(1 << 10)
+#define DWMCI_IDMAC_EN		(1 << 25)
+#define DWMCI_RESET_ALL		(DWMCI_CTRL_RESET | DWMCI_CTRL_FIFO_RESET |\
+				DWMCI_CTRL_DMA_RESET)
+
+/* CMD register */
+#define DWMCI_CMD_RESP_EXP	(1 << 6)
+#define DWMCI_CMD_RESP_LENGTH	(1 << 7)
+#define DWMCI_CMD_CHECK_CRC	(1 << 8)
+#define DWMCI_CMD_DATA_EXP	(1 << 9)
+#define DWMCI_CMD_RW		(1 << 10)
+#define DWMCI_CMD_SEND_STOP	(1 << 12)
+#define DWMCI_CMD_ABORT_STOP	(1 << 14)
+#define DWMCI_CMD_PRV_DAT_WAIT	(1 << 13)
+#define DWMCI_CMD_UPD_CLK	(1 << 21)
+#define DWMCI_CMD_USE_HOLD_REG	(1 << 29)
+#define DWMCI_CMD_START		(1 << 31)
+
+/* CLKENA register */
+#define DWMCI_CLKEN_ENABLE	(1 << 0)
+#define DWMCI_CLKEN_LOW_PWR	(1 << 16)
+
+/* Card-type registe */
+#define DWMCI_CTYPE_1BIT	0
+#define DWMCI_CTYPE_4BIT	(1 << 0)
+#define DWMCI_CTYPE_8BIT	(1 << 16)
+
+/* Status Register */
+#define DWMCI_BUSY		(1 << 9)
+
+/* FIFOTH Register */
+#define MSIZE(x)		((x) << 28)
+#define RX_WMARK(x)		((x) << 16)
+#define TX_WMARK(x)		(x)
+
+#define DWMCI_IDMAC_OWN		(1 << 31)
+#define DWMCI_IDMAC_CH		(1 << 4)
+#define DWMCI_IDMAC_FS		(1 << 3)
+#define DWMCI_IDMAC_LD		(1 << 2)
+
+/*  Bus Mode Register */
+#define DWMCI_BMOD_IDMAC_RESET	(1 << 0)
+#define DWMCI_BMOD_IDMAC_FB	(1 << 1)
+#define DWMCI_BMOD_IDMAC_EN	(1 << 7)
+
+struct dwmci_host {
+	char *name;
+	void *ioaddr;
+	unsigned int quirks;
+	unsigned int caps;
+	unsigned int version;
+	unsigned int clock;
+	unsigned int bus_hz;
+	int dev_index;
+	int buswidth;
+	u32 fifoth_val;
+	struct mmc *mmc;
+
+	void (*clksel)(struct dwmci_host *host);
+	unsigned int (*mmc_clk)(int dev_index);
+};
+
+struct dwmci_idmac {
+	u32 flags;
+	u32 cnt;
+	u32 addr;
+	u32 next_addr;
+};
+
+static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val)
+{
+	writel(val, host->ioaddr + reg);
+}
+
+static inline void dwmci_writew(struct dwmci_host *host, int reg, u16 val)
+{
+	writew(val, host->ioaddr + reg);
+}
+
+static inline void dwmci_writeb(struct dwmci_host *host, int reg, u8 val)
+{
+	writeb(val, host->ioaddr + reg);
+}
+static inline u32 dwmci_readl(struct dwmci_host *host, int reg)
+{
+	return readl(host->ioaddr + reg);
+}
+
+static inline u16 dwmci_readw(struct dwmci_host *host, int reg)
+{
+	return readw(host->ioaddr + reg);
+}
+
+static inline u8 dwmci_readb(struct dwmci_host *host, int reg)
+{
+	return readb(host->ioaddr + reg);
+}
+
+int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk);
+#endif	/* __DWMMC_HW_H */
diff --git a/include/e500.h b/include/e500.h
index e1708b9..0ff8e89 100644
--- a/include/e500.h
+++ b/include/e500.h
@@ -18,6 +18,9 @@
 #ifdef CONFIG_SYS_DPAA_FMAN
   unsigned long freqFMan[CONFIG_SYS_NUM_FMAN];
 #endif
+#ifdef CONFIG_SYS_DPAA_QBMAN
+  unsigned long freqQMAN;
+#endif
 #ifdef CONFIG_SYS_DPAA_PME
   unsigned long freqPME;
 #endif
diff --git a/include/env_default.h b/include/env_default.h
new file mode 100644
index 0000000..a1db73a
--- /dev/null
+++ b/include/env_default.h
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2000-2010
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com>
+ * Andreas Heppel <aheppel@sysgo.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifdef DEFAULT_ENV_INSTANCE_EMBEDDED
+env_t environment __PPCENV__ = {
+	ENV_CRC,	/* CRC Sum */
+#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
+	1,		/* Flags: valid */
+#endif
+	{
+#elif defined(DEFAULT_ENV_INSTANCE_STATIC)
+static char default_environment[] = {
+#else
+const uchar default_environment[] = {
+#endif
+#ifdef	CONFIG_BOOTARGS
+	"bootargs="	CONFIG_BOOTARGS			"\0"
+#endif
+#ifdef	CONFIG_BOOTCOMMAND
+	"bootcmd="	CONFIG_BOOTCOMMAND		"\0"
+#endif
+#ifdef	CONFIG_RAMBOOTCOMMAND
+	"ramboot="	CONFIG_RAMBOOTCOMMAND		"\0"
+#endif
+#ifdef	CONFIG_NFSBOOTCOMMAND
+	"nfsboot="	CONFIG_NFSBOOTCOMMAND		"\0"
+#endif
+#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
+	"bootdelay="	__stringify(CONFIG_BOOTDELAY)	"\0"
+#endif
+#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0)
+	"baudrate="	__stringify(CONFIG_BAUDRATE)	"\0"
+#endif
+#ifdef	CONFIG_LOADS_ECHO
+	"loads_echo="	__stringify(CONFIG_LOADS_ECHO)	"\0"
+#endif
+#ifdef	CONFIG_ETHADDR
+	"ethaddr="	__stringify(CONFIG_ETHADDR)	"\0"
+#endif
+#ifdef	CONFIG_ETH1ADDR
+	"eth1addr="	__stringify(CONFIG_ETH1ADDR)	"\0"
+#endif
+#ifdef	CONFIG_ETH2ADDR
+	"eth2addr="	__stringify(CONFIG_ETH2ADDR)	"\0"
+#endif
+#ifdef	CONFIG_ETH3ADDR
+	"eth3addr="	__stringify(CONFIG_ETH3ADDR)	"\0"
+#endif
+#ifdef	CONFIG_ETH4ADDR
+	"eth4addr="	__stringify(CONFIG_ETH4ADDR)	"\0"
+#endif
+#ifdef	CONFIG_ETH5ADDR
+	"eth5addr="	__stringify(CONFIG_ETH5ADDR)	"\0"
+#endif
+#ifdef	CONFIG_ETHPRIME
+	"ethprime="	CONFIG_ETHPRIME			"\0"
+#endif
+#ifdef	CONFIG_IPADDR
+	"ipaddr="	__stringify(CONFIG_IPADDR)	"\0"
+#endif
+#ifdef	CONFIG_SERVERIP
+	"serverip="	__stringify(CONFIG_SERVERIP)	"\0"
+#endif
+#ifdef	CONFIG_SYS_AUTOLOAD
+	"autoload="	CONFIG_SYS_AUTOLOAD		"\0"
+#endif
+#ifdef	CONFIG_PREBOOT
+	"preboot="	CONFIG_PREBOOT			"\0"
+#endif
+#ifdef	CONFIG_ROOTPATH
+	"rootpath="	CONFIG_ROOTPATH			"\0"
+#endif
+#ifdef	CONFIG_GATEWAYIP
+	"gatewayip="	__stringify(CONFIG_GATEWAYIP)	"\0"
+#endif
+#ifdef	CONFIG_NETMASK
+	"netmask="	__stringify(CONFIG_NETMASK)	"\0"
+#endif
+#ifdef	CONFIG_HOSTNAME
+	"hostname="	__stringify(CONFIG_HOSTNAME)	"\0"
+#endif
+#ifdef	CONFIG_BOOTFILE
+	"bootfile="	CONFIG_BOOTFILE			"\0"
+#endif
+#ifdef	CONFIG_LOADADDR
+	"loadaddr="	__stringify(CONFIG_LOADADDR)	"\0"
+#endif
+#ifdef	CONFIG_CLOCKS_IN_MHZ
+	"clocks_in_mhz=1\0"
+#endif
+#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
+	"pcidelay="	__stringify(CONFIG_PCI_BOOTDELAY)"\0"
+#endif
+#ifdef	CONFIG_ENV_VARS_UBOOT_CONFIG
+	"arch="		CONFIG_SYS_ARCH			"\0"
+	"cpu="		CONFIG_SYS_CPU			"\0"
+	"board="	CONFIG_SYS_BOARD		"\0"
+	"board_name="	CONFIG_SYS_BOARD		"\0"
+#ifdef CONFIG_SYS_VENDOR
+	"vendor="	CONFIG_SYS_VENDOR		"\0"
+#endif
+#ifdef CONFIG_SYS_SOC
+	"soc="		CONFIG_SYS_SOC			"\0"
+#endif
+#endif
+#ifdef	CONFIG_EXTRA_ENV_SETTINGS
+	CONFIG_EXTRA_ENV_SETTINGS
+#endif
+	"\0"
+#ifdef DEFAULT_ENV_INSTANCE_EMBEDDED
+	}
+#endif
+};
diff --git a/include/ext4fs.h b/include/ext4fs.h
index 23298fc..3b59d15 100644
--- a/include/ext4fs.h
+++ b/include/ext4fs.h
@@ -116,7 +116,7 @@
 extern struct ext2_data *ext4fs_root;
 extern struct ext2fs_node *ext4fs_file;
 
-#if defined(CONFIG_CMD_EXT4_WRITE)
+#if defined(CONFIG_EXT4_WRITE)
 extern struct ext2_inode *g_parent_inode;
 extern int gd_index;
 extern int gindex;
diff --git a/include/ext_common.h b/include/ext_common.h
index ce73857..86373a6 100644
--- a/include/ext_common.h
+++ b/include/ext_common.h
@@ -195,7 +195,4 @@
 int do_ext4_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]);
 int do_ext4_write(cmd_tbl_t *cmdtp, int flag, int argc,
 				char *const argv[]);
-int do_ext_load(cmd_tbl_t *cmdtp, int flag, int argc,
-					char *const argv[]);
-int do_ext_ls(cmd_tbl_t *cmdtp, int flag, int argc, char *const argv[]);
 #endif
diff --git a/include/fat.h b/include/fat.h
index cc85b06..706cd7a 100644
--- a/include/fat.h
+++ b/include/fat.h
@@ -212,6 +212,7 @@
 		      unsigned long maxsize);
 long file_fat_read(const char *filename, void *buffer, unsigned long maxsize);
 const char *file_getfsname(int idx);
+int fat_set_blk_dev(block_dev_desc_t *rbdd, disk_partition_t *info);
 int fat_register_device(block_dev_desc_t *dev_desc, int part_no);
 
 int file_fat_write(const char *filename, void *buffer, unsigned long maxsize);
diff --git a/include/flash.h b/include/flash.h
index 6d70bdd..7db599e 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -348,7 +348,6 @@
 
 #define TOSH_ID_FVT160	0xC2		/* TC58FVT160 ID (16 M, top )		*/
 #define TOSH_ID_FVB160	0x43		/* TC58FVT160 ID (16 M, bottom )	*/
-#define PHILIPS_LPC2292 0x0401FF13  /* LPC2292 internal FLASH			*/
 #define NUMONYX_256MBIT	0x8922		/* Numonyx P33/30 256MBit 65nm	*/
 
 /*-----------------------------------------------------------------------
diff --git a/include/fm_eth.h b/include/fm_eth.h
index e56541d..495765b 100644
--- a/include/fm_eth.h
+++ b/include/fm_eth.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2011 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
@@ -30,13 +30,21 @@
 	FM1_DTSEC3,
 	FM1_DTSEC4,
 	FM1_DTSEC5,
+	FM1_DTSEC6,
+	FM1_DTSEC9,
+	FM1_DTSEC10,
 	FM1_10GEC1,
+	FM1_10GEC2,
 	FM2_DTSEC1,
 	FM2_DTSEC2,
 	FM2_DTSEC3,
 	FM2_DTSEC4,
 	FM2_DTSEC5,
+	FM2_DTSEC6,
+	FM2_DTSEC9,
+	FM2_DTSEC10,
 	FM2_10GEC1,
+	FM2_10GEC2,
 	NUM_FM_PORTS,
 };
 
@@ -45,8 +53,15 @@
 	FM_ETH_10G_E,
 };
 
+#ifdef CONFIG_SYS_FMAN_V3
+#define CONFIG_SYS_FM1_DTSEC_MDIO_ADDR	(CONFIG_SYS_FSL_FM1_ADDR + 0xfc000)
+#define CONFIG_SYS_FM1_TGEC_MDIO_ADDR	(CONFIG_SYS_FSL_FM1_ADDR + 0xfd000)
+#define CONFIG_SYS_FM2_DTSEC_MDIO_ADDR	(CONFIG_SYS_FSL_FM2_ADDR + 0xfc000)
+#define CONFIG_SYS_FM2_TGEC_MDIO_ADDR	(CONFIG_SYS_FSL_FM2_ADDR + 0xfd000)
+#else
 #define CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR	(CONFIG_SYS_FSL_FM1_ADDR + 0xe1120)
 #define CONFIG_SYS_FM1_TGEC_MDIO_ADDR	(CONFIG_SYS_FSL_FM1_ADDR + 0xf1000)
+#endif
 
 #define DEFAULT_FM_MDIO_NAME "FSL_MDIO0"
 #define DEFAULT_FM_TGEC_MDIO_NAME "FM_TGEC_MDIO"
@@ -57,6 +72,33 @@
 	.phy_regs	= (void *)pregs,				\
 	.enet_if	= PHY_INTERFACE_MODE_NONE,			\
 
+#ifdef CONFIG_SYS_FMAN_V3
+#define FM_DTSEC_INFO_INITIALIZER(idx, n) \
+{									\
+	FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC_MDIO_ADDR)	\
+	.index		= idx,						\
+	.num		= n - 1,					\
+	.type		= FM_ETH_1G_E,					\
+	.port		= FM##idx##_DTSEC##n,				\
+	.rx_port_id	= RX_PORT_1G_BASE + n - 1,			\
+	.tx_port_id	= TX_PORT_1G_BASE + n - 1,			\
+	.compat_offset	= CONFIG_SYS_FSL_FM##idx##_OFFSET +		\
+				offsetof(struct ccsr_fman, memac[n-1]),\
+}
+
+#define FM_TGEC_INFO_INITIALIZER(idx, n) \
+{									\
+	FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_TGEC_MDIO_ADDR)	\
+	.index		= idx,						\
+	.num		= n - 1,					\
+	.type		= FM_ETH_10G_E,					\
+	.port		= FM##idx##_10GEC##n,				\
+	.rx_port_id	= RX_PORT_10G_BASE + n - 1,			\
+	.tx_port_id	= TX_PORT_10G_BASE + n - 1,			\
+	.compat_offset	= CONFIG_SYS_FSL_FM##idx##_OFFSET +		\
+				offsetof(struct ccsr_fman, memac[n-1]),\
+}
+#else
 #define FM_DTSEC_INFO_INITIALIZER(idx, n) \
 {									\
 	FM_ETH_INFO_INITIALIZER(idx, CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR)	\
@@ -82,7 +124,7 @@
 	.compat_offset	= CONFIG_SYS_FSL_FM##idx##_OFFSET +		\
 				offsetof(struct ccsr_fman, mac_10g[n-1]),\
 }
-
+#endif
 struct fm_eth_info {
 	u8 enabled;
 	u8 fm;
@@ -104,7 +146,14 @@
 	char *name;
 };
 
+struct memac_mdio_info {
+	struct memac_mdio_controller *regs;
+	char *name;
+};
+
 int fm_tgec_mdio_init(bd_t *bis, struct tgec_mdio_info *info);
+int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info);
+
 int fm_standard_init(bd_t *bis);
 void fman_enet_init(void);
 void fdt_fixup_fman_ethernet(void *fdt);
diff --git a/include/fs.h b/include/fs.h
new file mode 100644
index 0000000..4f30a38
--- /dev/null
+++ b/include/fs.h
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _FS_H
+#define _FS_H
+
+#include <common.h>
+
+#define FS_TYPE_ANY	0
+#define FS_TYPE_FAT	1
+#define FS_TYPE_EXT	2
+
+/*
+ * Tell the fs layer which block device an partition to use for future
+ * commands. This also internally identifies the filesystem that is present
+ * within the partition. The identification process may be limited to a
+ * specific filesystem type by passing FS_* in the fstype parameter.
+ *
+ * Returns 0 on success.
+ * Returns non-zero if there is an error accessing the disk or partition, or
+ * no known filesystem type could be recognized on it.
+ */
+int fs_set_blk_dev(const char *ifname, const char *dev_part_str, int fstype);
+
+/*
+ * Print the list of files on the partition previously set by fs_set_blk_dev(),
+ * in directory "dirname".
+ *
+ * Returns 0 on success. Returns non-zero on error.
+ */
+int fs_ls(const char *dirname);
+
+/*
+ * Read file "filename" from the partition previously set by fs_set_blk_dev(),
+ * to address "addr", starting at byte offset "offset", and reading "len"
+ * bytes. "offset" may be 0 to read from the start of the file. "len" may be
+ * 0 to read the entire file. Note that not all filesystem types support
+ * either/both offset!=0 or len!=0.
+ *
+ * Returns number of bytes read on success. Returns <= 0 on error.
+ */
+int fs_read(const char *filename, ulong addr, int offset, int len);
+
+/*
+ * Common implementation for various filesystem commands, optionally limited
+ * to a specific filesystem type via the fstype parameter.
+ */
+int do_load(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+		int fstype, int cmdline_base);
+int do_ls(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[],
+		int fstype);
+
+#endif /* _FS_H */
diff --git a/include/fsl_mdio.h b/include/fsl_mdio.h
index ea8b54b..e24e828 100644
--- a/include/fsl_mdio.h
+++ b/include/fsl_mdio.h
@@ -1,5 +1,5 @@
 /*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2012 Freescale Semiconductor, Inc.
  *	Jun-jie Zhang <b18070@freescale.com>
  *	Mingkai Hu <Mingkai.hu@freescale.com>
  *
@@ -51,6 +51,10 @@
 int tsec_phy_read(struct mii_dev *bus, int addr, int dev_addr, int regnum);
 int tsec_phy_write(struct mii_dev *bus, int addr, int dev_addr, int regnum,
 		u16 value);
+int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
+		int regnum, u16 value);
+int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
+		int regnum);
 
 struct fsl_pq_mdio_info {
 	struct tsec_mii_mng *regs;
diff --git a/include/i8042.h b/include/i8042.h
index 1395289..c48c057 100644
--- a/include/i8042.h
+++ b/include/i8042.h
@@ -39,6 +39,12 @@
 #define I8042_STATUS_REG    (CONFIG_SYS_ISA_IO + 0x0064)    /* keyboard status read */
 #define I8042_COMMAND_REG   (CONFIG_SYS_ISA_IO + 0x0064)    /* keyboard ctrl write */
 
+enum {
+	/* Output register (I8042_DATA_REG) has data for system */
+	I8042_STATUS_OUT_DATA	= 1 << 0,
+	I8042_STATUS_IN_DATA	= 1 << 1,
+};
+
 #define KBD_US              0        /* default US layout */
 #define KBD_GER             1        /* german layout */
 
@@ -69,6 +75,19 @@
 
 /* exports */
 
+/**
+ * Flush all buffer from keyboard controller to host.
+ */
+void i8042_flush(void);
+
+/**
+ * Disables the keyboard so that key strokes no longer generate scancodes to
+ * the host.
+ *
+ * @return 0 if ok, -1 if keyboard input was found while disabling
+ */
+int i8042_disable(void);
+
 int i8042_kbd_init(void);
 int i8042_tstc(void);
 int i8042_getc(void);
diff --git a/include/ide.h b/include/ide.h
index 95dcbdd..158e1be 100644
--- a/include/ide.h
+++ b/include/ide.h
@@ -27,6 +27,7 @@
 #define IDE_BUS(dev)	(dev / (CONFIG_SYS_IDE_MAXDEVICE / CONFIG_SYS_IDE_MAXBUS))
 
 #define	ATA_CURR_BASE(dev)	(CONFIG_SYS_ATA_BASE_ADDR+ide_bus_offset[IDE_BUS(dev)])
+extern ulong ide_bus_offset[];
 
 #ifdef CONFIG_IDE_LED
 
@@ -42,8 +43,10 @@
 
 #ifdef CONFIG_SYS_64BIT_LBA
 typedef uint64_t lbaint_t;
+#define LBAF "%llx"
 #else
 typedef ulong lbaint_t;
+#define LBAF "%lx"
 #endif
 
 /*
@@ -54,6 +57,14 @@
 ulong ide_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer);
 ulong ide_write(int device, ulong blknr, lbaint_t blkcnt, const void *buffer);
 
+#ifdef CONFIG_IDE_PREINIT
+int ide_preinit(void);
+#endif
+
+#ifdef CONFIG_IDE_INIT_POSTRESET
+int ide_init_postreset(void);
+#endif
+
 #if defined(CONFIG_OF_IDE_FIXUP)
 int ide_device_present(int dev);
 #endif
@@ -64,4 +75,14 @@
 void ide_read_data(int dev, ulong *sect_buf, int words);
 void ide_write_data(int dev, ulong *sect_buf, int words);
 #endif
+
+/*
+ * I/O function overrides
+ */
+void ide_input_swap_data(int dev, ulong *sect_buf, int words);
+void ide_input_data(int dev, ulong *sect_buf, int words);
+void ide_output_data(int dev, const ulong *sect_buf, int words);
+void ide_input_data_shorts(int dev, ushort *sect_buf, int shorts);
+void ide_output_data_shorts(int dev, ushort *sect_buf, int shorts);
+
 #endif /* _IDE_H */
diff --git a/include/image.h b/include/image.h
index e5f6649..0a895f2 100644
--- a/include/image.h
+++ b/include/image.h
@@ -34,6 +34,7 @@
 #define __IMAGE_H__
 
 #include "compiler.h"
+#include <asm/byteorder.h>
 
 #ifdef USE_HOSTCC
 
@@ -183,13 +184,13 @@
  * all data in network byte order (aka natural aka bigendian).
  */
 typedef struct image_header {
-	uint32_t	ih_magic;	/* Image Header Magic Number	*/
-	uint32_t	ih_hcrc;	/* Image Header CRC Checksum	*/
-	uint32_t	ih_time;	/* Image Creation Timestamp	*/
-	uint32_t	ih_size;	/* Image Data Size		*/
-	uint32_t	ih_load;	/* Data	 Load  Address		*/
-	uint32_t	ih_ep;		/* Entry Point Address		*/
-	uint32_t	ih_dcrc;	/* Image Data CRC Checksum	*/
+	__be32		ih_magic;	/* Image Header Magic Number	*/
+	__be32		ih_hcrc;	/* Image Header CRC Checksum	*/
+	__be32		ih_time;	/* Image Creation Timestamp	*/
+	__be32		ih_size;	/* Image Data Size		*/
+	__be32		ih_load;	/* Data	 Load  Address		*/
+	__be32		ih_ep;		/* Entry Point Address		*/
+	__be32		ih_dcrc;	/* Image Data CRC Checksum	*/
 	uint8_t		ih_os;		/* Operating System		*/
 	uint8_t		ih_arch;	/* CPU architecture		*/
 	uint8_t		ih_type;	/* Image Type			*/
@@ -511,6 +512,7 @@
 #define FIT_HASH_NODENAME	"hash"
 #define FIT_ALGO_PROP		"algo"
 #define FIT_VALUE_PROP		"value"
+#define FIT_IGNORE_PROP		"uboot-ignore"
 
 /* image node */
 #define FIT_DATA_PROP		"data"
@@ -595,6 +597,9 @@
 int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
 int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
 				int *value_len);
+#ifndef USE_HOSTCC
+int fit_image_hash_get_ignore(const void *fit, int noffset, int *ignore);
+#endif
 
 int fit_set_timestamp(void *fit, int noffset, time_t timestamp);
 int fit_set_hashes(void *fit);
diff --git a/include/input.h b/include/input.h
index 0f4acb2..e90bb0b 100644
--- a/include/input.h
+++ b/include/input.h
@@ -84,6 +84,8 @@
  * @param config	Input state
  * @param keycode	List of key codes to examine
  * @param num_keycodes	Number of key codes
+ * @return number of ascii characters sent, or 0 if none, or -1 for an
+ *	internal error
  */
 int input_send_keycodes(struct input_config *config, int keycode[], int count);
 
diff --git a/include/lh7a400.h b/include/lh7a400.h
deleted file mode 100644
index d1e70a2..0000000
--- a/include/lh7a400.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * lh7a400 SoC interface
- */
-
-#ifndef __LH7A400_H__
-#define __LH7A400_H__
-
-#include "lh7a40x.h"
-
-/* Interrupt Controller (userguide 8.2.1) */
-typedef struct {
-	volatile u32  intsr;
-	volatile u32  intrsr;
-	volatile u32  intens;
-	volatile u32  intenc;
-	volatile u32  rsvd1;
-	volatile u32  rsvd2;
-	volatile u32  rsvd3;
-} /*__attribute__((__packed__))*/ lh7a400_interrupt_t;
-#define LH7A400_INTERRUPT_BASE    (0x80000500)
-#define LH7A400_INTERRUPT_PTR     ((lh7a400_interrupt_t*) LH7A400_INTERRUPT_BASE)
-
-/* (DMA) Direct Memory Access Controller (userguide 9.2.1) */
-typedef struct {
-	lh7a40x_dmachan_t  chan[15];
-	volatile u32       glblint;
-	volatile u32       rsvd1;
-	volatile u32       rsvd2;
-	volatile u32       rsvd3;
-} /*__attribute__((__packed__))*/ lh7a400_dma_t;
-
-#define LH7A400_DMA_BASE      (0x80002800)
-#define DMA_USBTX_OFFSET      (0x000)
-#define DMA_USBRX_OFFSET      (0x040)
-#define DMA_MMCTX_OFFSET      (0x080)
-#define DMA_MMCRX_OFFSET      (0x0C0)
-#define DMA_AC97_BASE         (0x80002A00)
-
-#define LH7A400_DMA_PTR    ((lh7a400_dma_t*) LH7A400_DMA_BASE)
-#define LH7A400_DMA_USBTX \
-	((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBTX_OFFSET))
-#define LH7A400_DMA_USBRX \
-	((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_USBRX_OFFSET))
-#define LH7A400_DMA_MMCTX \
-	((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCTX_OFFSET))
-#define LH7A400_DMA_MMCRX \
-	((lh7a400_dmachan_t*) (LH7A400_DMA_BASE + DMA_MMCRX_OFFSET))
-#define LH7A400_AC97RX(n) \
-	((lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
-	((2*n) * sizeof(lh7a400_dmachan_t))))
-#define LH7A400_AC97TX(n) \
-	((lh7a400_dmachan_t*) (LH7A400_AC97_BASE + \
-	(((2*n)+1) * sizeof(lh7a400_dmachan_t))))
-
-#endif  /* __LH7A400_H__ */
diff --git a/include/lh7a404.h b/include/lh7a404.h
deleted file mode 100644
index 4098af3..0000000
--- a/include/lh7a404.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * lh7a404 SoC interface
- */
-
-#ifndef __LH7A404_H__
-#define __LH7A404_H__
-
-#include "lh7a40x.h"
-
-/* Interrupt Controller (userguide 8.2.1) */
-typedef struct {
-	volatile u32  irqstatus;
-	volatile u32  fiqstatus;
-	volatile u32  rawintr;
-	volatile u32  intsel;
-	volatile u32  inten;
-	volatile u32  intenclr;
-	volatile u32  softint;
-	volatile u32  softintclr;
-	volatile u32  protect;
-	volatile u32  unused1;
-	volatile u32  unused2;
-	volatile u32  vectaddr;
-	volatile u32  nvaddr;
-	volatile u32  unused3[32];
-	volatile u32  vad[16];
-	volatile u32  unused4[44];
-	volatile u32  vectcntl[16];
-	volatile u32  unused5[44];
-	volatile u32  itcr;
-	volatile u32  itip1;
-	volatile u32  itip2;
-	volatile u32  itop1;
-	volatile u32  itop2;
-	volatile u32  unused6[333];
-	volatile u32  periphid[4];
-	volatile u32  pcellid[4];
-} /*__attribute__((__packed__))*/ lh7a404_vic_t;
-#define LH7A404_VIC_BASE	(0x80008000)
-#define LH7A400_VIC_PTR(x)  ((lh7a404_vic_t*)(LH7A400_VIC_BASE + (x*0x2000)))
-
-
-typedef struct {
-	lh7a40x_dmachan_t  m2p0_tx;
-	lh7a40x_dmachan_t  m2p1_rx;
-	lh7a40x_dmachan_t  m2p2_tx;
-	lh7a40x_dmachan_t  m2p3_rx;
-	lh7a40x_dmachan_t  m2m0;
-	lh7a40x_dmachan_t  m2m1;
-	lh7a40x_dmachan_t  unused1;
-	lh7a40x_dmachan_t  unused2;
-	lh7a40x_dmachan_t  m2p5_rx;
-	lh7a40x_dmachan_t  m2p4_tx;
-	lh7a40x_dmachan_t  m2p7_rx;
-	lh7a40x_dmachan_t  m2p6_tx;
-	lh7a40x_dmachan_t  m2p9_rx;
-	lh7a40x_dmachan_t  m2p8_tx;
-	volatile u32       chanarb;
-	volatile u32       glblint;
-} /*__attribute__((__packed__))*/ lh7a400_dma_t;
-
-
-#endif  /* __LH7A404_H__ */
diff --git a/include/lh7a40x.h b/include/lh7a40x.h
deleted file mode 100644
index 09a463c..0000000
--- a/include/lh7a40x.h
+++ /dev/null
@@ -1,279 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * lh7a40x SoC series common interface
- */
-
-#ifndef __LH7A40X_H__
-#define __LH7A40X_H__
-
-/* (SMC) Static Memory Controller (usersguide 4.2.1) */
-typedef struct {
-	volatile u32  attib;
-	volatile u32  com;
-	volatile u32  io;
-	volatile u32  rsvd1;
-} /*__attribute__((__packed__))*/ lh7a40x_pccard_t;
-
-typedef struct {
-	volatile u32      bcr[8];
-	lh7a40x_pccard_t  pccard[2];
-	volatile u32	  pcmciacon;
-} /*__attribute__((__packed__))*/ lh7a40x_smc_t;
-#define LH7A40X_SMC_BASE  (0x80002000)
-#define LH7A40X_SMC_PTR   ((lh7a40x_smc_t*) LH7A40X_SMC_BASE)
-
-/* (SDMC) Synchronous Dynamic Ram Controller (usersguide 5.3.1) */
-typedef struct {
-	volatile u32  rsvd1;
-	volatile u32  gblcnfg;
-	volatile u32  rfshtmr;
-	volatile u32  bootstat;
-	volatile u32  sdcsc[4];
-} /*__attribute__((__packed__))*/ lh7a40x_sdmc_t;
-#define LH7A40X_SDMC_BASE  (0x80002400)
-#define LH7A40X_SDMC_PTR   ((lh7a40x_sdmc_t*) LH7A40X_SDMC_BASE)
-
-/* (CSC) Clock and State Controller (userguide 6.2.1) */
-typedef struct {
-	volatile u32  pwrsr;
-	volatile u32  pwrcnt;
-	volatile u32  halt;
-	volatile u32  stby;
-	volatile u32  bleoi;
-	volatile u32  mceoi;
-	volatile u32  teoi;
-	volatile u32  stfclr;
-	volatile u32  clkset;
-	volatile u32  scrreg[2];
-	volatile u32  rsvd1;
-	volatile u32  usbreset;
-} /*__attribute__((__packed__))*/ lh7a40x_csc_t;
-#define LH7A40X_STPWR_BASE  (0x80000400)
-#define LH7A40X_CSC_PTR     ((lh7a40x_csc_t*) LH7A40X_STPWR_BASE)
-
-#define CLKSET_SMCROM		(0x01000000)
-#define CLKSET_PS		(0x000C0000)
-#define CLKSET_PS_0		(0x00000000)
-#define CLKSET_PS_1		(0x00040000)
-#define CLKSET_PS_2		(0x00080000)
-#define CLKSET_PS_3		(0x000C0000)
-#define CLKSET_PCLKDIV		(0x00030000)
-#define CLKSET_PCLKDIV_2	(0x00000000)
-#define CLKSET_PCLKDIV_4	(0x00010000)
-#define CLKSET_PCLKDIV_8	(0x00020000)
-#define CLKSET_MAINDIV2		(0x0000f800)
-#define CLKSET_MAINDIV1		(0x00000780)
-#define CLKSET_PREDIV		(0x0000007C)
-#define CLKSET_HCLKDIV		(0x00000003)
-
-/* (DMA) Direct Memory Access Controller (userguide 9.2.1) */
-typedef struct {
-	volatile u32  maxcnt;
-	volatile u32  base;
-	volatile u32  current;
-	volatile u32  rsvd1;
-} lh7a40x_dmabuf_t;
-
-typedef struct {
-	volatile u32      control;
-	volatile u32      interrupt;
-	volatile u32      rsvd1;
-	volatile u32      status;
-	volatile u32      rsvd2;
-	volatile u32      remain;
-	volatile u32      rsvd3;
-	volatile u32      rsvd4;
-	lh7a40x_dmabuf_t  buf[2];
-} /*__attribute__((__packed__))*/ lh7a40x_dmachan_t;
-
-
-/* (WDT) Watchdog Timer (userguide 11.2.1) */
-typedef struct {
-	volatile u32  ctl;
-	volatile u32  rst;
-	volatile u32  status;
-	volatile u32  count[4];
-} /*__attribute__((__packed__))*/ lh7a40x_wdt_t;
-#define LH7A40X_WDT_BASE    (0x80001400)
-#define LH7A40X_WDT_PTR     ((lh7a40x_wdt_t*) LH7A40X_WDT_BASE)
-
-/* (RTC) Real Time Clock (lh7a400 userguide 12.2.1, lh7a404 userguide 13.2.1) */
-typedef struct {
-	volatile u32  rtcdr;
-	volatile u32  rtclr;
-	volatile u32  rtcmr;
-	volatile u32  unk1;
-	volatile u32  rtcstat_eoi;
-	volatile u32  rtccr;
-	volatile u32  rsvd1[58];
-} /*__attribute__((__packed__))*/ lh7a40x_rtc_t;
-#define LH7A40X_RTC_BASE    (0x80000D00)
-#define LH7A40X_RTC_PTR     ((lh7a40x_rtc_t*) LH7A40X_RTC_BASE)
-
-/* Timers (lh7a400 userguide 13.2.1, lh7a404 userguide 11.2.1) */
-typedef struct {
-	volatile u32  load;
-	volatile u32  value;
-	volatile u32  control;
-	volatile u32  tceoi;
-} /*__attribute__((__packed__))*/ lh7a40x_timer_t;
-
-typedef struct {
-	lh7a40x_timer_t  timer1;
-	volatile u32     rsvd1[4];
-	lh7a40x_timer_t  timer2;
-	volatile u32     unk1[4];
-	volatile u32     bzcon;
-	volatile u32     unk2[15];
-	lh7a40x_timer_t  timer3;
-	/*volatile u32     rsvd2;*/
-} /*__attribute__((__packed__))*/ lh7a40x_timers_t;
-#define LH7A40X_TIMERS_BASE    (0x80000C00)
-#define LH7A40X_TIMERS_PTR     ((lh7a40x_timers_t*) LH7A40X_TIMERS_BASE)
-
-#define TIMER_EN	(0x00000080)
-#define TIMER_PER	(0x00000040)
-#define TIMER_FREE	(0x00000000)
-#define TIMER_CLK508K	(0x00000008)
-#define TIMER_CLK2K	(0x00000000)
-
-/* (SSP) Sychronous Serial Ports (lh7a400 userguide 14.2.1, lh7a404 userguide 14.2.1) */
-typedef struct {
-	volatile u32  cr0;
-	volatile u32  cr1;
-	volatile u32  irr_roeoi;
-	volatile u32  dr;
-	volatile u32  cpr;
-	volatile u32  sr;
-	/*volatile u32  rsvd1[58];*/
-} /*__attribute__((__packed__))*/ lh7a40x_ssp_t;
-#define LH7A40X_SSP_BASE    (0x80000B00)
-#define LH7A40X_SSP_PTR     ((lh7a40x_ssp_t*) LH7A40X_SSP_BASE)
-
-/* (UART) Universal Asychronous Receiver/Transmitter (lh7a400 userguide 15.2.1, lh7a404 userguide 15.2.1) */
-typedef struct {
-	volatile u32  data;
-	volatile u32  fcon;
-	volatile u32  brcon;
-	volatile u32  con;
-	volatile u32  status;
-	volatile u32  rawisr;
-	volatile u32  inten;
-	volatile u32  isr;
-	volatile u32  rsvd1[56];
-} /*__attribute__((__packed__))*/ lh7a40x_uart_t;
-#define LH7A40X_UART_BASE    (0x80000600)
-#define LH7A40X_UART_PTR(n) \
-	((lh7a40x_uart_t*) (LH7A40X_UART_BASE + ((n-1) * sizeof(lh7a40x_uart_t))))
-
-#define UART_BE		(0x00000800)      /* the rx error bits */
-#define UART_OE		(0x00000400)
-#define UART_PE		(0x00000200)
-#define UART_FE		(0x00000100)
-
-#define UART_WLEN	(0x00000060)	/* fcon bits */
-#define UART_WLEN_8	(0x00000060)
-#define UART_WLEN_7	(0x00000040)
-#define UART_WLEN_6	(0x00000020)
-#define UART_WLEN_5	(0x00000000)
-#define UART_FEN	(0x00000010)
-#define UART_STP2	(0x00000008)
-#define UART_STP2_2	(0x00000008)
-#define UART_STP2_1	(0x00000000)
-#define UART_EPS	(0x00000004)
-#define UART_EPS_EVEN	(0x00000004)
-#define UART_EPS_ODD	(0x00000000)
-#define UART_PEN	(0x00000002)
-#define UART_BRK	(0x00000001)
-
-#define UART_BAUDDIV	(0x0000ffff)	/* brcon bits */
-
-#define UART_SIRBD	(0x00000080)	/* con bits */
-#define UART_LBE	(0x00000040)
-#define UART_MXP	(0x00000020)
-#define UART_TXP	(0x00000010)
-#define UART_RXP	(0x00000008)
-#define UART_SIRLP	(0x00000004)
-#define UART_SIRD	(0x00000002)
-#define UART_EN		(0x00000001)
-
-#define UART_TXFE	(0x00000080)	/* status bits */
-#define UART_RXFF	(0x00000040)
-#define UART_TXFF	(0x00000020)
-#define UART_RXFE	(0x00000010)
-#define UART_BUSY	(0x00000008)
-#define UART_DCD	(0x00000004)
-#define UART_DSR	(0x00000002)
-#define UART_CTS	(0x00000001)
-
-#define UART_MSEOI	(0xfffffff0)	/* rawisr interrupt bits */
-
-#define UART_RTI	(0x00000008)	/* generic interrupt bits */
-#define UART_MI		(0x00000004)
-#define UART_TI		(0x00000002)
-#define UART_RI		(0x00000001)
-
-/* (GPIO) General Purpose IO and External Interrupts (userguide 16.2.1) */
-typedef struct {
-	volatile u32  pad;
-	volatile u32  pbd;
-	volatile u32  pcd;
-	volatile u32  pdd;
-	volatile u32  padd;
-	volatile u32  pbdd;
-	volatile u32  pcdd;
-	volatile u32  pddd;
-	volatile u32  ped;
-	volatile u32  pedd;
-	volatile u32  kbdctl;
-	volatile u32  pinmux;
-	volatile u32  pfd;
-	volatile u32  pfdd;
-	volatile u32  pgd;
-	volatile u32  pgdd;
-	volatile u32  phd;
-	volatile u32  phdd;
-	volatile u32  rsvd1;
-	volatile u32  inttype1;
-	volatile u32  inttype2;
-	volatile u32  gpiofeoi;
-	volatile u32  gpiointen;
-	volatile u32  intstatus;
-	volatile u32  rawintstatus;
-	volatile u32  gpiodb;
-	volatile u32  papd;
-	volatile u32  pbpd;
-	volatile u32  pcpd;
-	volatile u32  pdpd;
-	volatile u32  pepd;
-	volatile u32  pfpd;
-	volatile u32  pgpd;
-	volatile u32  phpd;
-} /*__attribute__((__packed__))*/ lh7a40x_gpioint_t;
-#define LH7A40X_GPIOINT_BASE    (0x80000E00)
-#define LH7A40X_GPIOINT_PTR     ((lh7a40x_gpioint_t*) LH7A40X_GPIOINT_BASE)
-
-/* Embedded SRAM */
-#define CONFIG_SYS_SRAM_BASE	(0xB0000000)
-#define CONFIG_SYS_SRAM_SIZE	(80*1024)	/* 80kB */
-
-#endif  /* __LH7A40X_H__ */
diff --git a/include/libfdt.h b/include/libfdt.h
index de82ed5..c93ae28 100644
--- a/include/libfdt.h
+++ b/include/libfdt.h
@@ -852,17 +852,17 @@
 			const void *val, int len);
 
 /**
- * fdt_setprop_inplace_cell - change the value of a single-cell property
+ * fdt_setprop_inplace_u32 - change the value of a 32-bit integer property
  * @fdt: pointer to the device tree blob
  * @nodeoffset: offset of the node whose property to change
  * @name: name of the property to change
- * @val: cell (32-bit integer) value to replace the property with
+ * @val: 32-bit integer value to replace the property with
  *
- * fdt_setprop_inplace_cell() replaces the value of a given property
- * with the 32-bit integer cell value in val, converting val to
- * big-endian if necessary.  This function cannot change the size of a
- * property, and so will only work if the property already exists and
- * has length 4.
+ * fdt_setprop_inplace_u32() replaces the value of a given property
+ * with the 32-bit integer value in val, converting val to big-endian
+ * if necessary.  This function cannot change the size of a property,
+ * and so will only work if the property already exists and has length
+ * 4.
  *
  * This function will alter only the bytes in the blob which contain
  * the given property value, and will not alter or move any other part
@@ -871,7 +871,7 @@
  * returns:
  *	0, on success
  *	-FDT_ERR_NOSPACE, if the property's length is not equal to 4
-  *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
  *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
  *	-FDT_ERR_BADMAGIC,
  *	-FDT_ERR_BADVERSION,
@@ -879,14 +879,60 @@
  *	-FDT_ERR_BADSTRUCTURE,
  *	-FDT_ERR_TRUNCATED, standard meanings
  */
-static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
-					   const char *name, uint32_t val)
+static inline int fdt_setprop_inplace_u32(void *fdt, int nodeoffset,
+					  const char *name, uint32_t val)
 {
 	val = cpu_to_fdt32(val);
 	return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
 }
 
 /**
+ * fdt_setprop_inplace_u64 - change the value of a 64-bit integer property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value to replace the property with
+ *
+ * fdt_setprop_inplace_u64() replaces the value of a given property
+ * with the 64-bit integer value in val, converting val to big-endian
+ * if necessary.  This function cannot change the size of a property,
+ * and so will only work if the property already exists and has length
+ * 8.
+ *
+ * This function will alter only the bytes in the blob which contain
+ * the given property value, and will not alter or move any other part
+ * of the tree.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, if the property's length is not equal to 8
+ *	-FDT_ERR_NOTFOUND, node does not have the named property
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_inplace_u64(void *fdt, int nodeoffset,
+					  const char *name, uint64_t val)
+{
+	val = cpu_to_fdt64(val);
+	return fdt_setprop_inplace(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_setprop_inplace_cell - change the value of a single-cell property
+ *
+ * This is an alternative name for fdt_setprop_inplace_u32()
+ */
+static inline int fdt_setprop_inplace_cell(void *fdt, int nodeoffset,
+					   const char *name, uint32_t val)
+{
+	return fdt_setprop_inplace_u32(fdt, nodeoffset, name, val);
+}
+
+/**
  * fdt_nop_property - replace a property with nop tags
  * @fdt: pointer to the device tree blob
  * @nodeoffset: offset of the node whose property to nop
@@ -945,11 +991,20 @@
 int fdt_finish_reservemap(void *fdt);
 int fdt_begin_node(void *fdt, const char *name);
 int fdt_property(void *fdt, const char *name, const void *val, int len);
-static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
+static inline int fdt_property_u32(void *fdt, const char *name, uint32_t val)
 {
 	val = cpu_to_fdt32(val);
 	return fdt_property(fdt, name, &val, sizeof(val));
 }
+static inline int fdt_property_u64(void *fdt, const char *name, uint64_t val)
+{
+	val = cpu_to_fdt64(val);
+	return fdt_property(fdt, name, &val, sizeof(val));
+}
+static inline int fdt_property_cell(void *fdt, const char *name, uint32_t val)
+{
+	return fdt_property_u32(fdt, name, val);
+}
 #define fdt_property_string(fdt, name, str) \
 	fdt_property(fdt, name, str, strlen(str)+1)
 int fdt_end_node(void *fdt);
@@ -959,6 +1014,7 @@
 /* Read-write functions                                               */
 /**********************************************************************/
 
+int fdt_create_empty_tree(void *buf, int bufsize);
 int fdt_open_into(const void *fdt, void *buf, int bufsize);
 int fdt_pack(void *fdt);
 
@@ -1068,14 +1124,14 @@
 		const void *val, int len);
 
 /**
- * fdt_setprop_cell - set a property to a single cell value
+ * fdt_setprop_u32 - set a property to a 32-bit integer
  * @fdt: pointer to the device tree blob
  * @nodeoffset: offset of the node whose property to change
  * @name: name of the property to change
  * @val: 32-bit integer value for the property (native endian)
  *
- * fdt_setprop_cell() sets the value of the named property in the
- * given node to the given cell value (converting to big-endian if
+ * fdt_setprop_u32() sets the value of the named property in the given
+ * node to the given 32-bit integer value (converting to big-endian if
  * necessary), or creates a new property with that value if it does
  * not already exist.
  *
@@ -1095,14 +1151,60 @@
  *	-FDT_ERR_BADLAYOUT,
  *	-FDT_ERR_TRUNCATED, standard meanings
  */
-static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
-				   uint32_t val)
+static inline int fdt_setprop_u32(void *fdt, int nodeoffset, const char *name,
+				  uint32_t val)
 {
 	val = cpu_to_fdt32(val);
 	return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
 }
 
 /**
+ * fdt_setprop_u64 - set a property to a 64-bit integer
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value for the property (native endian)
+ *
+ * fdt_setprop_u64() sets the value of the named property in the given
+ * node to the given 64-bit integer value (converting to big-endian if
+ * necessary), or creates a new property with that value if it does
+ * not already exist.
+ *
+ * This function may insert or delete data from the blob, and will
+ * therefore change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_setprop_u64(void *fdt, int nodeoffset, const char *name,
+				  uint64_t val)
+{
+	val = cpu_to_fdt64(val);
+	return fdt_setprop(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_setprop_cell - set a property to a single cell value
+ *
+ * This is an alternative name for fdt_setprop_u32()
+ */
+static inline int fdt_setprop_cell(void *fdt, int nodeoffset, const char *name,
+				   uint32_t val)
+{
+	return fdt_setprop_u32(fdt, nodeoffset, name, val);
+}
+
+/**
  * fdt_setprop_string - set a property to a string value
  * @fdt: pointer to the device tree blob
  * @nodeoffset: offset of the node whose property to change
@@ -1134,6 +1236,147 @@
 	fdt_setprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
 
 /**
+ * fdt_appendprop - append to or create a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to append to
+ * @val: pointer to data to append to the property value
+ * @len: length of the data to append to the property value
+ *
+ * fdt_appendprop() appends the value to the named property in the
+ * given node, creating the property if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
+		   const void *val, int len);
+
+/**
+ * fdt_appendprop_u32 - append a 32-bit integer value to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 32-bit integer value to append to the property (native endian)
+ *
+ * fdt_appendprop_u32() appends the given 32-bit integer value
+ * (converting to big-endian if necessary) to the value of the named
+ * property in the given node, or creates a new property with that
+ * value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_appendprop_u32(void *fdt, int nodeoffset,
+				     const char *name, uint32_t val)
+{
+	val = cpu_to_fdt32(val);
+	return fdt_appendprop(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_appendprop_u64 - append a 64-bit integer value to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @val: 64-bit integer value to append to the property (native endian)
+ *
+ * fdt_appendprop_u64() appends the given 64-bit integer value
+ * (converting to big-endian if necessary) to the value of the named
+ * property in the given node, or creates a new property with that
+ * value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+static inline int fdt_appendprop_u64(void *fdt, int nodeoffset,
+				     const char *name, uint64_t val)
+{
+	val = cpu_to_fdt64(val);
+	return fdt_appendprop(fdt, nodeoffset, name, &val, sizeof(val));
+}
+
+/**
+ * fdt_appendprop_cell - append a single cell value to a property
+ *
+ * This is an alternative name for fdt_appendprop_u32()
+ */
+static inline int fdt_appendprop_cell(void *fdt, int nodeoffset,
+				      const char *name, uint32_t val)
+{
+	return fdt_appendprop_u32(fdt, nodeoffset, name, val);
+}
+
+/**
+ * fdt_appendprop_string - append a string to a property
+ * @fdt: pointer to the device tree blob
+ * @nodeoffset: offset of the node whose property to change
+ * @name: name of the property to change
+ * @str: string value to append to the property
+ *
+ * fdt_appendprop_string() appends the given string to the value of
+ * the named property in the given node, or creates a new property
+ * with that value if it does not already exist.
+ *
+ * This function may insert data into the blob, and will therefore
+ * change the offsets of some existing nodes.
+ *
+ * returns:
+ *	0, on success
+ *	-FDT_ERR_NOSPACE, there is insufficient free space in the blob to
+ *		contain the new property value
+ *	-FDT_ERR_BADOFFSET, nodeoffset did not point to FDT_BEGIN_NODE tag
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_BADMAGIC,
+ *	-FDT_ERR_BADVERSION,
+ *	-FDT_ERR_BADSTATE,
+ *	-FDT_ERR_BADSTRUCTURE,
+ *	-FDT_ERR_BADLAYOUT,
+ *	-FDT_ERR_TRUNCATED, standard meanings
+ */
+#define fdt_appendprop_string(fdt, nodeoffset, name, str) \
+	fdt_appendprop((fdt), (nodeoffset), (name), (str), strlen(str)+1)
+
+/**
  * fdt_delprop - delete a property
  * @fdt: pointer to the device tree blob
  * @nodeoffset: offset of the node whose property to nop
diff --git a/include/linker_lists.h b/include/linker_lists.h
new file mode 100644
index 0000000..0b405d7
--- /dev/null
+++ b/include/linker_lists.h
@@ -0,0 +1,148 @@
+/*
+ * include/linker_lists.h
+ *
+ * Implementation of linker-generated arrays
+ *
+ * Copyright (C) 2012 Marek Vasut <marex@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+#ifndef __LINKER_LISTS_H__
+#define __LINKER_LISTS_H__
+
+/**
+ * ll_entry_declare() - Declare linker-generated array entry
+ * @_type:	Data type of the entry
+ * @_name:	Name of the entry
+ * @_section_u:	Subsection of u_boot_list in which this entry is placed
+ *		(with underscores instead of dots, for name concatenation)
+ * @_section_d:	Subsection of u_boot_list in which this entry is placed
+ *		(with dots, for section concatenation)
+ *
+ * This macro declares a variable that is placed into a linker-generated
+ * array. This is a basic building block for more advanced use of linker-
+ * generated arrays. The user is expected to build their own macro wrapper
+ * around this one.
+ *
+ * A variable declared using this macro must be compile-time initialized
+ * and is as such placed into subsection of special section, .u_boot_list.
+ * The subsection is specified by the _section_[u,d] parameter, see below.
+ * The base name of the variable is _name, yet the actual variable is
+ * declared as concatenation of
+ *
+ *   %_u_boot_list_ + @_section_u + _ + @_name
+ *
+ * which ensures name uniqueness. This variable shall never be refered
+ * directly though.
+ *
+ * Special precaution must be made when using this macro:
+ * 1) The _type must not contain the "static" keyword, otherwise the entry
+ *    is not generated.
+ *
+ * 2) The @_section_u and @_section_d variables must match, the only difference
+ *    is that in @_section_u is every dot "." character present in @_section_d
+ *    replaced by a single underscore "_" character in @_section_u. The actual
+ *    purpose of these parameters is to select proper subsection in the global
+ *    .u_boot_list section.
+ *
+ * 3) In case a section is declared that contains some array elements AND a
+ *    subsection of this section is declared and contains some elements, it is
+ *    imperative that the elements are of the same type.
+ *
+ * 4) In case an outer section is declared that contains some array elements
+ *    AND am inner subsection of this section is declared and contains some
+ *    elements, then when traversing the outer section, even the elements of
+ *    the inner sections are present in the array.
+ *
+ * Example:
+ * ll_entry_declare(struct my_sub_cmd, my_sub_cmd, cmd_sub, cmd.sub) = {
+ *         .x = 3,
+ *         .y = 4,
+ * };
+ */
+#define ll_entry_declare(_type, _name, _section_u, _section_d)		\
+	_type _u_boot_list_##_section_u##_##_name __attribute__((	\
+			unused,	aligned(4),				\
+			section(".u_boot_list."#_section_d"."#_name)))
+
+/**
+ * ll_entry_start() - Point to first entry of linker-generated array
+ * @_type:	Data type of the entry
+ * @_section_u:	Subsection of u_boot_list in which this entry is placed
+ *		(with underscores instead of dots)
+ *
+ * This function returns (_type *) pointer to the very first entry of a
+ * linker-generated array placed into subsection of .u_boot_list section
+ * specified by _section_u argument.
+ *
+ * Example:
+ * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub);
+ */
+#define ll_entry_start(_type, _section_u)				\
+	({								\
+		extern _type _u_boot_list_##_section_u##__start;	\
+		_type *_ll_result = &_u_boot_list_##_section_u##__start;\
+		_ll_result;						\
+	})
+
+/**
+ * ll_entry_count() - Return the number of elements in linker-generated array
+ * @_type:	Data type of the entry
+ * @_section_u:	Subsection of u_boot_list in which this entry is placed
+ *		(with underscores instead of dots)
+ *
+ * This function returns the number of elements of a linker-generated array
+ * placed into subsection of .u_boot_list section specified by _section_u
+ * argument. The result is of an unsigned int type.
+ *
+ * Example:
+ * int i;
+ * const unsigned int count = ll_entry_count(struct my_sub_cmd, cmd_sub);
+ * struct my_sub_cmd *msc = ll_entry_start(struct my_sub_cmd, cmd_sub);
+ * for (i = 0; i < count; i++, msc++)
+ *         printf("Entry %i, x=%i y=%i\n", i, msc->x, msc->y);
+ */
+#define ll_entry_count(_type, _section_u)				\
+	({								\
+		extern _type _u_boot_list_##_section_u##__start;	\
+		extern _type _u_boot_list_##_section_u##__end;		\
+		unsigned int _ll_result =				\
+			&_u_boot_list_##_section_u##__end -		\
+			&_u_boot_list_##_section_u##__start;		\
+		_ll_result;						\
+	})
+
+
+/**
+ * ll_entry_get() - Retrieve entry from linker-generated array by name
+ * @_type:	Data type of the entry
+ * @_name:	Name of the entry
+ * @_section_u:	Subsection of u_boot_list in which this entry is placed
+ *		(with underscores instead of dots)
+ *
+ * This function returns a pointer to a particular entry in LG-array
+ * identified by the subsection of u_boot_list where the entry resides
+ * and it's name.
+ *
+ * Example:
+ * ll_entry_declare(struct my_sub_cmd, my_sub_cmd, cmd_sub, cmd.sub) = {
+ *         .x = 3,
+ *         .y = 4,
+ * };
+ * ...
+ * struct my_sub_cmd *c = ll_entry_get(struct my_sub_cmd, my_sub_cmd, cmd_sub);
+ */
+#define ll_entry_get(_type, _name, _section_u)				\
+	({								\
+		extern _type _u_boot_list_##_section_u##_##_name;	\
+		_type *_ll_result = &_u_boot_list_##_section_u##_##_name;\
+		_ll_result;						\
+	})
+
+#endif	/* __LINKER_LISTS_H__ */
diff --git a/include/linux/byteorder/big_endian.h b/include/linux/byteorder/big_endian.h
index 19b0c86..aaf7757 100644
--- a/include/linux/byteorder/big_endian.h
+++ b/include/linux/byteorder/big_endian.h
@@ -7,63 +7,104 @@
 #ifndef __BIG_ENDIAN_BITFIELD
 #define __BIG_ENDIAN_BITFIELD
 #endif
-#define	__BYTE_ORDER	__BIG_ENDIAN
+#define __BYTE_ORDER	__BIG_ENDIAN
 
+#include <linux/compiler.h>
+#include <linux/types.h>
 #include <linux/byteorder/swab.h>
 
-#define __constant_htonl(x) ((__u32)(x))
-#define __constant_ntohl(x) ((__u32)(x))
-#define __constant_htons(x) ((__u16)(x))
-#define __constant_ntohs(x) ((__u16)(x))
-#define __constant_cpu_to_le64(x) ___swab64((x))
-#define __constant_le64_to_cpu(x) ___swab64((x))
-#define __constant_cpu_to_le32(x) ___swab32((x))
-#define __constant_le32_to_cpu(x) ___swab32((x))
-#define __constant_cpu_to_le16(x) ___swab16((x))
-#define __constant_le16_to_cpu(x) ___swab16((x))
-#define __constant_cpu_to_be64(x) ((__u64)(x))
-#define __constant_be64_to_cpu(x) ((__u64)(x))
-#define __constant_cpu_to_be32(x) ((__u32)(x))
-#define __constant_be32_to_cpu(x) ((__u32)(x))
-#define __constant_cpu_to_be16(x) ((__u16)(x))
-#define __constant_be16_to_cpu(x) ((__u16)(x))
-#define __cpu_to_le64(x) __swab64((x))
-#define __le64_to_cpu(x) __swab64((x))
-#define __cpu_to_le32(x) __swab32((x))
-#define __le32_to_cpu(x) __swab32((x))
-#define __cpu_to_le16(x) __swab16((x))
-#define __le16_to_cpu(x) __swab16((x))
-#define __cpu_to_be64(x) ((__u64)(x))
-#define __be64_to_cpu(x) ((__u64)(x))
-#define __cpu_to_be32(x) ((__u32)(x))
-#define __be32_to_cpu(x) ((__u32)(x))
-#define __cpu_to_be16(x) ((__u16)(x))
-#define __be16_to_cpu(x) ((__u16)(x))
-#define __cpu_to_le64p(x) __swab64p((x))
-#define __le64_to_cpup(x) __swab64p((x))
-#define __cpu_to_le32p(x) __swab32p((x))
-#define __le32_to_cpup(x) __swab32p((x))
-#define __cpu_to_le16p(x) __swab16p((x))
-#define __le16_to_cpup(x) __swab16p((x))
-#define __cpu_to_be64p(x) (*(__u64*)(x))
-#define __be64_to_cpup(x) (*(__u64*)(x))
-#define __cpu_to_be32p(x) (*(__u32*)(x))
-#define __be32_to_cpup(x) (*(__u32*)(x))
-#define __cpu_to_be16p(x) (*(__u16*)(x))
-#define __be16_to_cpup(x) (*(__u16*)(x))
+#define __constant_htonl(x) ((__force __be32)(__u32)(x))
+#define __constant_ntohl(x) ((__force __u32)(__be32)(x))
+#define __constant_htons(x) ((__force __be16)(__u16)(x))
+#define __constant_ntohs(x) ((__force __u16)(__be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)___constant_swab64((x)))
+#define __constant_le64_to_cpu(x) ___constant_swab64((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)___constant_swab32((x)))
+#define __constant_le32_to_cpu(x) ___constant_swab32((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)___constant_swab16((x)))
+#define __constant_le16_to_cpu(x) ___constant_swab16((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __constant_be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __constant_be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __constant_be16_to_cpu(x) ((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)__swab64((x)))
+#define __le64_to_cpu(x) __swab64((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)__swab32((x)))
+#define __le32_to_cpu(x) __swab32((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)__swab16((x)))
+#define __le16_to_cpu(x) __swab16((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)(__u64)(x))
+#define __be64_to_cpu(x) ((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)(__u32)(x))
+#define __be32_to_cpu(x) ((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)(__u16)(x))
+#define __be16_to_cpu(x) ((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__force __le64)__swab64p(p);
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__force __le32)__swab32p(p);
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__force __le16)__swab16p(p);
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__force __be64)*p;
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return (__force __u64)*p;
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__force __be32)*p;
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return (__force __u32)*p;
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__force __be16)*p;
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return (__force __u16)*p;
+}
 #define __cpu_to_le64s(x) __swab64s((x))
 #define __le64_to_cpus(x) __swab64s((x))
 #define __cpu_to_le32s(x) __swab32s((x))
 #define __le32_to_cpus(x) __swab32s((x))
 #define __cpu_to_le16s(x) __swab16s((x))
 #define __le16_to_cpus(x) __swab16s((x))
-#define __cpu_to_be64s(x) do {} while (0)
-#define __be64_to_cpus(x) do {} while (0)
-#define __cpu_to_be32s(x) do {} while (0)
-#define __be32_to_cpus(x) do {} while (0)
-#define __cpu_to_be16s(x) do {} while (0)
-#define __be16_to_cpus(x) do {} while (0)
+#define __cpu_to_be64s(x) do { (void)(x); } while (0)
+#define __be64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be32s(x) do { (void)(x); } while (0)
+#define __be32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_be16s(x) do { (void)(x); } while (0)
+#define __be16_to_cpus(x) do { (void)(x); } while (0)
 
+#ifdef __KERNEL__
 #include <linux/byteorder/generic.h>
+#endif
 
 #endif /* _LINUX_BYTEORDER_BIG_ENDIAN_H */
diff --git a/include/linux/byteorder/little_endian.h b/include/linux/byteorder/little_endian.h
index a46f3ec..a4cb3bf 100644
--- a/include/linux/byteorder/little_endian.h
+++ b/include/linux/byteorder/little_endian.h
@@ -9,54 +9,93 @@
 #endif
 #define	__BYTE_ORDER	__LITTLE_ENDIAN
 
+#include <linux/compiler.h>
+#include <linux/types.h>
 #include <linux/byteorder/swab.h>
 
-#define __constant_htonl(x) ___constant_swab32((x))
-#define __constant_ntohl(x) ___constant_swab32((x))
-#define __constant_htons(x) ___constant_swab16((x))
-#define __constant_ntohs(x) ___constant_swab16((x))
-#define __constant_cpu_to_le64(x) ((__u64)(x))
-#define __constant_le64_to_cpu(x) ((__u64)(x))
-#define __constant_cpu_to_le32(x) ((__u32)(x))
-#define __constant_le32_to_cpu(x) ((__u32)(x))
-#define __constant_cpu_to_le16(x) ((__u16)(x))
-#define __constant_le16_to_cpu(x) ((__u16)(x))
-#define __constant_cpu_to_be64(x) ___constant_swab64((x))
-#define __constant_be64_to_cpu(x) ___constant_swab64((x))
-#define __constant_cpu_to_be32(x) ___constant_swab32((x))
-#define __constant_be32_to_cpu(x) ___constant_swab32((x))
-#define __constant_cpu_to_be16(x) ___constant_swab16((x))
-#define __constant_be16_to_cpu(x) ___constant_swab16((x))
-#define __cpu_to_le64(x) ((__u64)(x))
-#define __le64_to_cpu(x) ((__u64)(x))
-#define __cpu_to_le32(x) ((__u32)(x))
-#define __le32_to_cpu(x) ((__u32)(x))
-#define __cpu_to_le16(x) ((__u16)(x))
-#define __le16_to_cpu(x) ((__u16)(x))
-#define __cpu_to_be64(x) __swab64((x))
-#define __be64_to_cpu(x) __swab64((x))
-#define __cpu_to_be32(x) __swab32((x))
-#define __be32_to_cpu(x) __swab32((x))
-#define __cpu_to_be16(x) __swab16((x))
-#define __be16_to_cpu(x) __swab16((x))
-#define __cpu_to_le64p(x) (*(__u64*)(x))
-#define __le64_to_cpup(x) (*(__u64*)(x))
-#define __cpu_to_le32p(x) (*(__u32*)(x))
-#define __le32_to_cpup(x) (*(__u32*)(x))
-#define __cpu_to_le16p(x) (*(__u16*)(x))
-#define __le16_to_cpup(x) (*(__u16*)(x))
-#define __cpu_to_be64p(x) __swab64p((x))
-#define __be64_to_cpup(x) __swab64p((x))
-#define __cpu_to_be32p(x) __swab32p((x))
-#define __be32_to_cpup(x) __swab32p((x))
-#define __cpu_to_be16p(x) __swab16p((x))
-#define __be16_to_cpup(x) __swab16p((x))
-#define __cpu_to_le64s(x) do {} while (0)
-#define __le64_to_cpus(x) do {} while (0)
-#define __cpu_to_le32s(x) do {} while (0)
-#define __le32_to_cpus(x) do {} while (0)
-#define __cpu_to_le16s(x) do {} while (0)
-#define __le16_to_cpus(x) do {} while (0)
+#define __constant_htonl(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_ntohl(x) ___constant_swab32((__force __be32)(x))
+#define __constant_htons(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_ntohs(x) ___constant_swab16((__force __be16)(x))
+#define __constant_cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __constant_le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __constant_cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __constant_le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __constant_cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __constant_le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __constant_cpu_to_be64(x) ((__force __be64)___constant_swab64((x)))
+#define __constant_be64_to_cpu(x) ___constant_swab64((__force __u64)(__be64)(x))
+#define __constant_cpu_to_be32(x) ((__force __be32)___constant_swab32((x)))
+#define __constant_be32_to_cpu(x) ___constant_swab32((__force __u32)(__be32)(x))
+#define __constant_cpu_to_be16(x) ((__force __be16)___constant_swab16((x)))
+#define __constant_be16_to_cpu(x) ___constant_swab16((__force __u16)(__be16)(x))
+#define __cpu_to_le64(x) ((__force __le64)(__u64)(x))
+#define __le64_to_cpu(x) ((__force __u64)(__le64)(x))
+#define __cpu_to_le32(x) ((__force __le32)(__u32)(x))
+#define __le32_to_cpu(x) ((__force __u32)(__le32)(x))
+#define __cpu_to_le16(x) ((__force __le16)(__u16)(x))
+#define __le16_to_cpu(x) ((__force __u16)(__le16)(x))
+#define __cpu_to_be64(x) ((__force __be64)__swab64((x)))
+#define __be64_to_cpu(x) __swab64((__force __u64)(__be64)(x))
+#define __cpu_to_be32(x) ((__force __be32)__swab32((x)))
+#define __be32_to_cpu(x) __swab32((__force __u32)(__be32)(x))
+#define __cpu_to_be16(x) ((__force __be16)__swab16((x)))
+#define __be16_to_cpu(x) __swab16((__force __u16)(__be16)(x))
+
+static inline __le64 __cpu_to_le64p(const __u64 *p)
+{
+	return (__force __le64)*p;
+}
+static inline __u64 __le64_to_cpup(const __le64 *p)
+{
+	return (__force __u64)*p;
+}
+static inline __le32 __cpu_to_le32p(const __u32 *p)
+{
+	return (__force __le32)*p;
+}
+static inline __u32 __le32_to_cpup(const __le32 *p)
+{
+	return (__force __u32)*p;
+}
+static inline __le16 __cpu_to_le16p(const __u16 *p)
+{
+	return (__force __le16)*p;
+}
+static inline __u16 __le16_to_cpup(const __le16 *p)
+{
+	return (__force __u16)*p;
+}
+static inline __be64 __cpu_to_be64p(const __u64 *p)
+{
+	return (__force __be64)__swab64p(p);
+}
+static inline __u64 __be64_to_cpup(const __be64 *p)
+{
+	return __swab64p((__u64 *)p);
+}
+static inline __be32 __cpu_to_be32p(const __u32 *p)
+{
+	return (__force __be32)__swab32p(p);
+}
+static inline __u32 __be32_to_cpup(const __be32 *p)
+{
+	return __swab32p((__u32 *)p);
+}
+static inline __be16 __cpu_to_be16p(const __u16 *p)
+{
+	return (__force __be16)__swab16p(p);
+}
+static inline __u16 __be16_to_cpup(const __be16 *p)
+{
+	return __swab16p((__u16 *)p);
+}
+#define __cpu_to_le64s(x) do { (void)(x); } while (0)
+#define __le64_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le32s(x) do { (void)(x); } while (0)
+#define __le32_to_cpus(x) do { (void)(x); } while (0)
+#define __cpu_to_le16s(x) do { (void)(x); } while (0)
+#define __le16_to_cpus(x) do { (void)(x); } while (0)
 #define __cpu_to_be64s(x) __swab64s((x))
 #define __be64_to_cpus(x) __swab64s((x))
 #define __cpu_to_be32s(x) __swab32s((x))
@@ -64,6 +103,8 @@
 #define __cpu_to_be16s(x) __swab16s((x))
 #define __be16_to_cpus(x) __swab16s((x))
 
+#ifdef __KERNEL__
 #include <linux/byteorder/generic.h>
+#endif
 
 #endif /* _LINUX_BYTEORDER_LITTLE_ENDIAN_H */
diff --git a/include/linux/byteorder/swab.h b/include/linux/byteorder/swab.h
index b1d570e..bb4a046 100644
--- a/include/linux/byteorder/swab.h
+++ b/include/linux/byteorder/swab.h
@@ -100,7 +100,7 @@
 {
 	return __arch__swab16(x);
 }
-static __inline__ __u16 __swab16p(__u16 *x)
+static __inline__ __u16 __swab16p(const __u16 *x)
 {
 	return __arch__swab16p(x);
 }
@@ -113,7 +113,7 @@
 {
 	return __arch__swab32(x);
 }
-static __inline__ __u32 __swab32p(__u32 *x)
+static __inline__ __u32 __swab32p(const __u32 *x)
 {
 	return __arch__swab32p(x);
 }
@@ -133,7 +133,7 @@
 	return __arch__swab64(x);
 #  endif
 }
-static __inline__ __u64 __swab64p(__u64 *x)
+static __inline__ __u64 __swab64p(const __u64 *x)
 {
 	return __arch__swab64p(x);
 }
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 593b07f..e1338bf 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -1,9 +1,6 @@
 #ifndef _LINUX_COMPAT_H_
 #define _LINUX_COMPAT_H_
 
-#define __user
-#define __iomem
-
 #define ndelay(x)	udelay(1)
 
 #define printk	printf
diff --git a/include/linux/mtd/mtd-abi.h b/include/linux/mtd/mtd-abi.h
index 5991157..8bdd231 100644
--- a/include/linux/mtd/mtd-abi.h
+++ b/include/linux/mtd/mtd-abi.h
@@ -11,6 +11,8 @@
 #include <linux/compat.h>
 #endif
 
+#include <linux/compiler.h>
+
 struct erase_info_user {
 	uint32_t start;
 	uint32_t length;
diff --git a/include/linux/stddef.h b/include/linux/stddef.h
index 81e34c2..c540f61 100644
--- a/include/linux/stddef.h
+++ b/include/linux/stddef.h
@@ -12,7 +12,9 @@
 #include <linux/types.h>
 #endif
 
+#ifndef __CHECKER__
 #undef offsetof
 #define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#endif
 
 #endif
diff --git a/include/linux/unaligned/generic.h b/include/linux/unaligned/generic.h
index cc688e1..02d97ff 100644
--- a/include/linux/unaligned/generic.h
+++ b/include/linux/unaligned/generic.h
@@ -1,9 +1,6 @@
 #ifndef _LINUX_UNALIGNED_GENERIC_H
 #define _LINUX_UNALIGNED_GENERIC_H
 
-/* define __force to nothing in U-Boot */
-#define __force
-
 /*
  * Cause a link-time error if we try an unaligned access other than
  * 1,2,4 or 8 bytes long
diff --git a/include/lpd7a400_cpld.h b/include/lpd7a400_cpld.h
deleted file mode 100644
index c70af09..0000000
--- a/include/lpd7a400_cpld.h
+++ /dev/null
@@ -1,195 +0,0 @@
-/*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Logic lh7a400-10 Card Engine CPLD interface
- */
-
-#ifndef __LPD7A400_CPLD_H_
-#define __LPD7A400_CPLD_H_
-
-
-/*
- * IO Controller Address and Register Definitions
- *   - using LH7A400-10 Card Engine IO Controller Specification
- *     (logic PN: 70000079)
- */
-
-/*------------------------------------------------------------------
- * Slow Peripherals (nCS6)
- */
-#define LPD7A400_CPLD_CF		(0x60200000)
-#define LPD7A400_CPLD_ISA		(0x60400000)
-
-/*------------------------------------------------------------------
- * Fast Peripherals (nCS7)
- *
- * The CPLD directs access to 0x70000000-0x701fffff to the onboard
- * ethernet controller
- */
-#define LPD7A400_CPLD_WLAN_BASE		(0x70000000)
-
-/* All registers are 8 bit */
-#define LPD7A400_CPLD_CECTL_REG		(0x70200000)
-#define LPD7A400_CPLD_SPIDATA_REG	(0x70600000)
-#define LPD7A400_CPLD_SPICTL_REG	(0x70800000)
-#define LPD7A400_CPLD_EEPSPI_REG	(0x70a00000)
-#define LPD7A400_CPLD_INTMASK_REG	(0x70c00000)
-#define LPD7A400_CPLD_MODE_REG		(0x70e00000)
-#define LPD7A400_CPLD_FLASH_REG		(0x71000000)
-#define LPD7A400_CPLD_PWRMG_REG		(0x71200000)
-#define LPD7A400_CPLD_REV_REG		(0x71400000)
-#define LPD7A400_CPLD_EXTGPIO_REG	(0x71600000)
-#define LPD7A400_CPLD_GPIODATA_REG	(0x71800000)
-#define LPD7A400_CPLD_GPIODIR_REG	(0x71a00000)
-
-#define LPD7A400_CPLD_REGPTR		(volatile u8*)
-
-/* Card Engine Control Register (section 3.1.2) */
-#define CECTL_SWINT	(0x80)	/* Software settable interrupt source
-				   (routed to uP PF3)
-				   0 = generate interrupt, 1 = do not */
-#define CECTL_OCMSK	(0x40)	/* USB1 connection interrupt mask
-				   0 = not masked, 1 = masked */
-#define CECTL_PDRV	(0x20)	/* PCC_nDRV output
-				   0 = active, 1 = inactive */
-#define CECTL_USB1C	(0x10)	/* USB1 connection interrupt
-				   0 = active, 1 = inactive */
-#define CECTL_USB1P	(0x08)  /* USB1 Power enable
-				   0 = enabled, 1 = disabled */
-#define CECTL_AWKP	(0x04)  /* Auto-Wakeup enable
-				   0 = enabled, 1 = disabled */
-#define CECTL_LCDV	(0x02)  /* LCD VEE enable
-				   0 = disabled, 1 = enabled */
-#define CECTL_WLPE	(0x01)  /* Wired LAN power enable
-				   0 = enabled, 1 = disabled */
-
-/* SPI Control Register (section 3.1.5) */
-#define SPICTL_SPLD	(0x20)	/* SPI load (R)
-				   0 = data reg. has not been loaded, shift
-				       count has not been reset
-				   1 = data reg. loaded, shift count reset */
-#define SPICTL_SPST	(0x10)  /* SPI start (RW)
-				   0 = don't load data reg. and reset shift count
-				   1 = ready to load data reg and reset shift count */
-#define SPICTL_SPDN	(0x08)  /* SPI done (R)
-				   0 = not done
-				   1 = access done */
-#define SPICTL_SPRW	(0x04)  /* SPI read/write (RW)
-				   0 = SPI write access
-				   1 = SPI read access */
-#define SPICTL_STCS	(0x02)  /* SPI touch chip select (RW)
-				   0 = not selected
-				   1 = selected */
-#define SPICTL_SCCS	(0x01)  /* SPI CODEC chip select (RW) {not used}
-				   0 = not selected
-				   1 = selected */
-
-/* EEPROM SPI Interface Register (section 3.1.6) */
-#define EEPSPI_EECS	(0x08)	/* EEPROM chip select (RW)
-				   0 = not selected
-				   1 = selected */
-#define EEPSPI_EECK	(0x04)	/* EEPROM SPI clock (RW) */
-#define EEPSPI_EETX	(0x02)  /* EEPROM SPI tx data (RW) */
-#define EEPSPI_EERX	(0x01)  /* EEPROM SPI rx data (R) */
-
-/* Interrupt/Mask Register (section 3.1.7) */
-#define INTMASK_CMSK	(0x80)  /* CPLD_nIRQD interrupt mask (RW)
-				   0 = not masked
-				   1 = masked */
-#define INTMASK_CIRQ	(0x40)	/* interrupt signal to CPLD (R)
-				   0 = interrupt active
-				   1 = no interrupt */
-#define INTMASK_PIRQ	(0x10)	/* legacy, no effect */
-#define INTMASK_TMSK	(0x08)	/* Touch chip interrupt mask (RW)
-				   0 = not masked
-				   1 = masked */
-#define INTMASK_WMSK	(0x04)  /* Wired LAN interrupt mask (RW)
-				   0 = not masked
-				   1 = masked */
-#define INTMASK_TIRQ	(0x02)  /* Touch chip interrupt request (R)
-				   0 = interrupt active
-				   1 = no interrupt */
-#define INTMASK_WIRQ	(0x01)  /* Wired LAN interrupt request (R)
-				   0 = interrupt active
-				   1 = no interrupt */
-
-/* Mode Register (section 3.1.8) */
-#define MODE_VS1	(0x80)  /* PCMCIA Voltage Sense 1 input (PCC_VS1) (R)
-				   0 = active slot VS1 pin is low
-				   1 = active slot VS1 pin is high */
-#define MODE_CD2	(0x40)  /* PCMCIA Card Detect 2 input (PCC_nCD2) (R)
-				   0 = active slot CD2 is low
-				   1 = active slot CD2 is high */
-#define MODE_IOIS16	(0x20)  /* PCMCIA IOIS16 input (PCC_nIOIS16) (R)
-				   0 = 16 bit access area
-				   1 = 8 bit access area */
-#define MODE_CD1	(0x10)  /* PCMCIA Card Detect 1 input (PCC_nCD1) (R)
-				   0 = active slot CD1 is low
-				   1 = active slot CD1 is high */
-#define MODE_upMODE3	(0x08)  /* Mode Pin 3 (R)
-				   0 = off-board boot device
-				   1 = on-board boot device (flash) */
-#define MODE_upMODE2	(0x04)  /* Mode Pin 2 (R) (LH7A400 Little Endian only)
-				   0 = big endian
-				   1 = little endian */
-#define MODE_upMODE1	(0x02)  /* Mode Pin 1 and Mode Pin 2 (R) */
-#define MODE_upMODE0	(0x01)  /*   - bus width at boot */
-
-
-/* Flash Register (section 3.1.9) */
-#define FLASH_FPOP	(0x08)	/* Flash populated (RW)
-				   0 = populated, 1 = not */
-#define FLASH_FST2	(0x04)  /* Flash status (R) (RY/BY# pin for upper 16 bit chip
-				   0 = busy, 1 = ready */
-#define FLASH_FST1	(0x02)  /* Flash status (R) (RY/BY# pin for lower 16 bit chip
-				   0 = busy, 1 = ready */
-#define FLASH_FPEN	(0x01)  /* Flash program enable (RW)
-				   0 = flash write protected
-				   1 = programming enabled */
-
-/* Power Management Register (section 3.1.10)
- *    - when either of these is low an unmaskable interrupt to cpu
- *      is generated
- */
-#define PWRMG_STBY	(0x10)  /* state of nSTANDBY signal to CPLD (R)
-				   0 = low, 1 = high */
-#define PWRMG_SPND	(0x04)  /* state of nSUSPEND signal to CPLD (R)
-				   0 = low, 1 = high */
-
-
-/* Extended GPIO Register (section 3.1.12) */
-#define EXTGPIO_STATUS1	(0x04)  /* Status 1 output (RW) (uP_STATUS_1)
-				   0 = set pin low, 1 = set pin high */
-#define EXTGPIO_STATUS2 (0x02)  /* Status 2 output (RW) (uP_STATUS_2)
-				   0 = set pin low, 1 = set pin high */
-#define EXTGPIO_GPIO1	(0x01)  /* General purpose output (RW) (CPLD_GPIO_1)
-				   0 = set pin low, 1 = set pin high */
-
-/* GPIO Data Register (section 3.1.13) */
-#define GPIODATA_GPIO2	(0x01)  /* General purpose input/output (RW) (CPLD_GPIO_2)
-				   0 = set low (output) / read low (input)
-				   1 = set high (output) / read high (input) */
-
-/* GPIO Direction Register (section 3.1.14) */
-#define GPIODIR_GPDR0	(0x01)  /* GPIO2 direction (RW)
-				   0 = output, 1 = input */
-
-#endif  /* __LH7A400_H__ */
diff --git a/include/mpc83xx.h b/include/mpc83xx.h
index a78f1a2..b295d6d 100644
--- a/include/mpc83xx.h
+++ b/include/mpc83xx.h
@@ -74,6 +74,7 @@
 #define SPR_FAMILY(spridr)		((spridr & 0xFFF00000) >> 20)
 
 #define SPR_8308			0x8100
+#define SPR_8309			0x8110
 #define SPR_831X_FAMILY			0x80B
 #define SPR_8311			0x80B2
 #define SPR_8313			0x80B0
@@ -389,6 +390,86 @@
 #define SICRH_TSOBI1_V2P5		(1 << 1)
 #define SICRH_TSOBI2_V3P3		(0 << 0)
 #define SICRH_TSOBI2_V2P5		(1 << 0)
+
+#elif defined(CONFIG_MPC8309)
+/* SICR_1 */
+#define SICR_1_UART1_UART1S		(0 << (30-2))
+#define SICR_1_UART1_UART1RTS		(1 << (30-2))
+#define SICR_1_I2C_I2C			(0 << (30-4))
+#define SICR_1_I2C_CKSTOP		(1 << (30-4))
+#define SICR_1_IRQ_A_IRQ		(0 << (30-6))
+#define SICR_1_IRQ_A_MCP		(1 << (30-6))
+#define SICR_1_IRQ_B_IRQ		(0 << (30-8))
+#define SICR_1_IRQ_B_CKSTOP		(1 << (30-8))
+#define SICR_1_GPIO_A_GPIO		(0 << (30-10))
+#define SICR_1_GPIO_A_SD		(2 << (30-10))
+#define SICR_1_GPIO_A_DDR		(3 << (30-10))
+#define SICR_1_GPIO_B_GPIO		(0 << (30-12))
+#define SICR_1_GPIO_B_SD		(2 << (30-12))
+#define SICR_1_GPIO_B_QE		(3 << (30-12))
+#define SICR_1_GPIO_C_GPIO		(0 << (30-14))
+#define SICR_1_GPIO_C_CAN		(1 << (30-14))
+#define SICR_1_GPIO_C_DDR		(2 << (30-14))
+#define SICR_1_GPIO_C_LCS		(3 << (30-14))
+#define SICR_1_GPIO_D_GPIO		(0 << (30-16))
+#define SICR_1_GPIO_D_CAN		(1 << (30-16))
+#define SICR_1_GPIO_D_DDR		(2 << (30-16))
+#define SICR_1_GPIO_D_LCS		(3 << (30-16))
+#define SICR_1_GPIO_E_GPIO		(0 << (30-18))
+#define SICR_1_GPIO_E_CAN		(1 << (30-18))
+#define SICR_1_GPIO_E_DDR		(2 << (30-18))
+#define SICR_1_GPIO_E_LCS		(3 << (30-18))
+#define SICR_1_GPIO_F_GPIO		(0 << (30-20))
+#define SICR_1_GPIO_F_CAN		(1 << (30-20))
+#define SICR_1_GPIO_F_CK		(2 << (30-20))
+#define SICR_1_USB_A_USBDR		(0 << (30-22))
+#define SICR_1_USB_A_UART2S		(1 << (30-22))
+#define SICR_1_USB_B_USBDR		(0 << (30-24))
+#define SICR_1_USB_B_UART2S		(1 << (30-24))
+#define SICR_1_USB_B_UART2RTS		(2 << (30-24))
+#define SICR_1_USB_C_USBDR		(0 << (30-26))
+#define SICR_1_USB_C_QE_EXT		(3 << (30-26))
+#define SICR_1_FEC1_FEC1		(0 << (30-28))
+#define SICR_1_FEC1_GTM			(1 << (30-28))
+#define SICR_1_FEC1_GPIO		(2 << (30-28))
+#define SICR_1_FEC2_FEC2		(0 << (30-30))
+#define SICR_1_FEC2_GTM			(1 << (30-30))
+#define SICR_1_FEC2_GPIO		(2 << (30-30))
+/* SICR_2 */
+#define SICR_2_FEC3_FEC3		(0 << (30-0))
+#define SICR_2_FEC3_TMR			(1 << (30-0))
+#define SICR_2_FEC3_GPIO		(2 << (30-0))
+#define SICR_2_HDLC1_A_HDLC1		(0 << (30-2))
+#define SICR_2_HDLC1_A_GPIO		(1 << (30-2))
+#define SICR_2_HDLC1_A_TDM1		(2 << (30-2))
+#define SICR_2_ELBC_A_LA		(0 << (30-4))
+#define SICR_2_ELBC_B_LCLK		(0 << (30-6))
+#define SICR_2_HDLC2_A_HDLC2		(0 << (30-8))
+#define SICR_2_HDLC2_A_GPIO		(0 << (30-8))
+#define SICR_2_HDLC2_A_TDM2		(0 << (30-8))
+/* bits 10-11 unused */
+#define SICR_2_USB_D_USBDR		(0 << (30-12))
+#define SICR_2_USB_D_GPIO		(2 << (30-12))
+#define SICR_2_USB_D_QE_BRG		(3 << (30-12))
+#define SICR_2_PCI_PCI			(0 << (30-14))
+#define SICR_2_PCI_CPCI_HS		(2 << (30-14))
+#define SICR_2_HDLC1_B_HDLC1		(0 << (30-16))
+#define SICR_2_HDLC1_B_GPIO		(1 << (30-16))
+#define SICR_2_HDLC1_B_QE_BRG		(2 << (30-16))
+#define SICR_2_HDLC1_B_TDM1		(3 << (30-16))
+#define SICR_2_HDLC1_C_HDLC1		(0 << (30-18))
+#define SICR_2_HDLC1_C_GPIO		(1 << (30-18))
+#define SICR_2_HDLC1_C_TDM1		(2 << (30-18))
+#define SICR_2_HDLC2_B_HDLC2		(0 << (30-20))
+#define SICR_2_HDLC2_B_GPIO		(1 << (30-20))
+#define SICR_2_HDLC2_B_QE_BRG		(2 << (30-20))
+#define SICR_2_HDLC2_B_TDM2		(3 << (30-20))
+#define SICR_2_HDLC2_C_HDLC2		(0 << (30-22))
+#define SICR_2_HDLC2_C_GPIO		(1 << (30-22))
+#define SICR_2_HDLC2_C_TDM2		(2 << (30-22))
+#define SICR_2_HDLC2_C_QE_BRG		(3 << (30-22))
+#define SICR_2_QUIESCE_B		(0 << (30-24))
+
 #endif
 
 /*
@@ -580,6 +661,63 @@
 #define HRCWL_SVCOD_DIV_8		0x10000000
 #define HRCWL_SVCOD_DIV_2		0x20000000
 #define HRCWL_SVCOD_DIV_1		0x30000000
+#elif defined(CONFIG_MPC8309)
+
+#define HRCWL_CEVCOD			0x000000C0
+#define HRCWL_CEVCOD_SHIFT		6
+/*
+ * According to Errata MPC8309RMAD, Rev. 0.2, 9/2012
+ * these are different than with 8360, 832x
+ */
+#define HRCWL_CE_PLL_VCO_DIV_2		0x00000000
+#define HRCWL_CE_PLL_VCO_DIV_4		0x00000040
+#define HRCWL_CE_PLL_VCO_DIV_8		0x00000080
+
+#define HRCWL_CEPDF			0x00000020
+#define HRCWL_CEPDF_SHIFT		5
+#define HRCWL_CE_PLL_DIV_1X1		0x00000000
+#define HRCWL_CE_PLL_DIV_2X1		0x00000020
+
+#define HRCWL_CEPMF			0x0000001F
+#define HRCWL_CEPMF_SHIFT		0
+#define HRCWL_CE_TO_PLL_1X16_		0x00000000
+#define HRCWL_CE_TO_PLL_1X2		0x00000002
+#define HRCWL_CE_TO_PLL_1X3		0x00000003
+#define HRCWL_CE_TO_PLL_1X4		0x00000004
+#define HRCWL_CE_TO_PLL_1X5		0x00000005
+#define HRCWL_CE_TO_PLL_1X6		0x00000006
+#define HRCWL_CE_TO_PLL_1X7		0x00000007
+#define HRCWL_CE_TO_PLL_1X8		0x00000008
+#define HRCWL_CE_TO_PLL_1X9		0x00000009
+#define HRCWL_CE_TO_PLL_1X10		0x0000000A
+#define HRCWL_CE_TO_PLL_1X11		0x0000000B
+#define HRCWL_CE_TO_PLL_1X12		0x0000000C
+#define HRCWL_CE_TO_PLL_1X13		0x0000000D
+#define HRCWL_CE_TO_PLL_1X14		0x0000000E
+#define HRCWL_CE_TO_PLL_1X15		0x0000000F
+#define HRCWL_CE_TO_PLL_1X16		0x00000010
+#define HRCWL_CE_TO_PLL_1X17		0x00000011
+#define HRCWL_CE_TO_PLL_1X18		0x00000012
+#define HRCWL_CE_TO_PLL_1X19		0x00000013
+#define HRCWL_CE_TO_PLL_1X20		0x00000014
+#define HRCWL_CE_TO_PLL_1X21		0x00000015
+#define HRCWL_CE_TO_PLL_1X22		0x00000016
+#define HRCWL_CE_TO_PLL_1X23		0x00000017
+#define HRCWL_CE_TO_PLL_1X24		0x00000018
+#define HRCWL_CE_TO_PLL_1X25		0x00000019
+#define HRCWL_CE_TO_PLL_1X26		0x0000001A
+#define HRCWL_CE_TO_PLL_1X27		0x0000001B
+#define HRCWL_CE_TO_PLL_1X28		0x0000001C
+#define HRCWL_CE_TO_PLL_1X29		0x0000001D
+#define HRCWL_CE_TO_PLL_1X30		0x0000001E
+#define HRCWL_CE_TO_PLL_1X31		0x0000001F
+
+#define HRCWL_SVCOD			0x30000000
+#define HRCWL_SVCOD_SHIFT		28
+#define HRCWL_SVCOD_DIV_2		0x00000000
+#define HRCWL_SVCOD_DIV_4		0x10000000
+#define HRCWL_SVCOD_DIV_8		0x20000000
+#define HRCWL_SVCOD_DIV_1		0x30000000
 #endif
 
 /*
@@ -940,6 +1078,21 @@
 #define SCCR_SATACM_1			0x00000055
 #define SCCR_SATACM_2			0x000000aa
 #define SCCR_SATACM_3			0x000000ff
+#elif defined(CONFIG_MPC8309)
+/* SCCR bits - MPC8309 specific */
+#define SCCR_SDHCCM			0x0c000000
+#define SCCR_SDHCCM_SHIFT		26
+#define SCCR_SDHCCM_0			0x00000000
+#define SCCR_SDHCCM_1			0x04000000
+#define SCCR_SDHCCM_2			0x08000000
+#define SCCR_SDHCCM_3			0x0c000000
+
+#define SCCR_USBDRCM			0x00c00000
+#define SCCR_USBDRCM_SHIFT		22
+#define SCCR_USBDRCM_0			0x00000000
+#define SCCR_USBDRCM_1			0x00400000
+#define SCCR_USBDRCM_2			0x00800000
+#define SCCR_USBDRCM_3			0x00c00000
 #endif
 
 #define SCCR_PCIEXP1CM			0x00300000
@@ -969,7 +1122,7 @@
  */
 #define CSCONFIG_EN			0x80000000
 #define CSCONFIG_AP			0x00800000
-#if defined(CONFIG_MPC8308) || defined(CONFIG_MPC831x)
+#if defined(CONFIG_MPC830x) || defined(CONFIG_MPC831x)
 #define CSCONFIG_ODT_RD_NEVER		0x00000000
 #define CSCONFIG_ODT_RD_ONLY_CURRENT	0x00100000
 #define CSCONFIG_ODT_RD_ONLY_OTHER_CS	0x00200000
diff --git a/include/net.h b/include/net.h
index 3539336..970d4d1 100644
--- a/include/net.h
+++ b/include/net.h
@@ -102,12 +102,13 @@
 extern int eth_unregister(struct eth_device *dev);/* Remove network device */
 extern void eth_try_another(int first_restart);	/* Change the device */
 extern void eth_set_current(void);		/* set nterface to ethcur var */
+
 /* get the current device MAC */
+extern struct eth_device *eth_current;
+
 static inline __attribute__((always_inline))
 struct eth_device *eth_get_dev(void)
 {
-	extern struct eth_device *eth_current;
-
 	return eth_current;
 }
 extern struct eth_device *eth_get_dev_by_name(const char *devname);
@@ -517,10 +518,10 @@
 	NETLOOP_SUCCESS,
 	NETLOOP_FAIL
 };
+extern enum net_loop_state net_state;
+
 static inline void net_set_state(enum net_loop_state state)
 {
-	extern enum net_loop_state net_state;
-
 	debug_cond(DEBUG_INT_STATE, "--- NetState set to %d\n", state);
 	net_state = state;
 }
diff --git a/include/pcmcia.h b/include/pcmcia.h
index ca0bf22..0cc7f3b 100644
--- a/include/pcmcia.h
+++ b/include/pcmcia.h
@@ -58,8 +58,6 @@
 # define CONFIG_PCMCIA_SLOT_B
 #elif defined(CONFIG_ICU862)		/* The ICU862 use SLOT_B	*/
 # define CONFIG_PCMCIA_SLOT_B
-#elif defined(CONFIG_C2MON)		/* The C2MON  use SLOT_B	*/
-# define CONFIG_PCMCIA_SLOT_B
 #elif defined(CONFIG_R360MPI)		/* The R360MPI use SLOT_B	*/
 # define CONFIG_PCMCIA_SLOT_B
 #elif defined(CONFIG_ATC)		/* The ATC use SLOT_A	*/
diff --git a/include/scsi.h b/include/scsi.h
index 89ae45f..9da764b 100644
--- a/include/scsi.h
+++ b/include/scsi.h
@@ -150,6 +150,8 @@
 #define SCSI_READ6		0x08		/* Read 6-byte (MANDATORY) */
 #define SCSI_READ10		0x28		/* Read 10-byte (MANDATORY) */
 #define SCSI_RD_CAPAC	0x25		/* Read Capacity (MANDATORY) */
+#define SCSI_RD_CAPAC10	SCSI_RD_CAPAC	/* Read Capacity (10) */
+#define SCSI_RD_CAPAC16	0x9e		/* Read Capacity (16) */
 #define SCSI_RD_DEFECT	0x37		/* Read Defect Data (O) */
 #define SCSI_READ_LONG	0x3E		/* Read Long (O) */
 #define SCSI_REASS_BLK	0x07		/* Reassign Blocks (O) */
@@ -189,6 +191,8 @@
 void scsi_init(void);
 void scsi_scan(int mode);
 
+/** @return the number of scsi disks */
+int scsi_get_disk_count(void);
 
 #define SCSI_IDENTIFY					0xC0  /* not used */
 
diff --git a/include/sdhci.h b/include/sdhci.h
index c0345ed..c44793d 100644
--- a/include/sdhci.h
+++ b/include/sdhci.h
@@ -224,6 +224,7 @@
 #define SDHCI_QUIRK_NO_HISPD_BIT	(1 << 3)
 #define SDHCI_QUIRK_BROKEN_VOLTAGE	(1 << 4)
 #define SDHCI_QUIRK_NO_CD		(1 << 5)
+#define SDHCI_QUIRK_WAIT_SEND_CMD	(1 << 6)
 
 /* to make gcc happy */
 struct sdhci_host;
diff --git a/include/serial.h b/include/serial.h
index a8d23f5..14f863e 100644
--- a/include/serial.h
+++ b/include/serial.h
@@ -20,6 +20,8 @@
 	struct serial_device	*next;
 };
 
+void default_serial_puts(const char *s);
+
 extern struct serial_device serial_smc_device;
 extern struct serial_device serial_scc_device;
 extern struct serial_device *default_serial_console(void);
diff --git a/include/status_led.h b/include/status_led.h
index c85c206..da9fae9 100644
--- a/include/status_led.h
+++ b/include/status_led.h
@@ -72,22 +72,6 @@
 
 # define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
 
-/*****  ETX_094  ********************************************************/
-#elif defined(CONFIG_ETX094)
-
-# define STATUS_LED_PAR		im_ioport.iop_pdpar
-# define STATUS_LED_DIR		im_ioport.iop_pddir
-# undef  STATUS_LED_ODR
-# define STATUS_LED_DAT		im_ioport.iop_pddat
-
-# define STATUS_LED_BIT		0x00000001
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0	*/
-
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
 /*****  GEN860T  *********************************************************/
 #elif defined(CONFIG_GEN860T)
 
@@ -170,26 +154,6 @@
 # define STATUS_LED_GREEN	1
 # define STATUS_LED_BOOT	2		/* IDE LED used for boot status */
 
-/*****  LANTEC  *********************************************************/
-#elif defined(CONFIG_LANTEC)
-
-# define STATUS_LED_PAR		im_ioport.iop_pdpar
-# define STATUS_LED_DIR		im_ioport.iop_pddir
-# undef  STATUS_LED_ODR
-# define STATUS_LED_DAT		im_ioport.iop_pddat
-
-# if CONFIG_LATEC < 2
-#  define STATUS_LED_BIT	0x1000
-# else
-#  define STATUS_LED_BIT	0x0800
-# endif
-# define STATUS_LED_PERIOD	(CONFIG_SYS_HZ / 2)
-# define STATUS_LED_STATE	STATUS_LED_BLINKING
-
-# define STATUS_LED_ACTIVE	0		/* LED on for bit == 0 */
-
-# define STATUS_LED_BOOT	0		/* LED 0 used for boot status */
-
 /*****  ICU862   ********************************************************/
 #elif defined(CONFIG_ICU862)
 
diff --git a/include/twl4030.h b/include/twl4030.h
index 9cd32ab..0c17f59 100644
--- a/include/twl4030.h
+++ b/include/twl4030.h
@@ -151,6 +151,103 @@
 #define TWL4030_PM_MASTER_SW_EVENTS_DEVSLP		(1 << 1)
 #define TWL4030_PM_MASTER_SW_EVENTS_DEVOFF		(1 << 0)
 
+/* Power bus message definitions */
+
+/* The TWL4030/5030 splits its power-management resources (the various
+ * regulators, clock and reset lines) into 3 processor groups - P1, P2 and
+ * P3. These groups can then be configured to transition between sleep, wait-on
+ * and active states by sending messages to the power bus.  See Section 5.4.2
+ * Power Resources of TWL4030 TRM
+ */
+
+/* Processor groups */
+#define DEV_GRP_NULL		0x0
+#define DEV_GRP_P1		0x1	/* P1: all OMAP devices */
+#define DEV_GRP_P2		0x2	/* P2: all Modem devices */
+#define DEV_GRP_P3		0x4	/* P3: all peripheral devices */
+
+/* Resource groups */
+#define RES_GRP_RES		0x0	/* Reserved */
+#define RES_GRP_PP		0x1	/* Power providers */
+#define RES_GRP_RC		0x2	/* Reset and control */
+#define RES_GRP_PP_RC		0x3
+#define RES_GRP_PR		0x4	/* Power references */
+#define RES_GRP_PP_PR		0x5
+#define RES_GRP_RC_PR		0x6
+#define RES_GRP_ALL		0x7	/* All resource groups */
+
+#define RES_TYPE2_R0		0x0
+
+#define RES_TYPE_ALL		0x7
+
+/* Resource states */
+#define RES_STATE_WRST		0xF
+#define RES_STATE_ACTIVE	0xE
+#define RES_STATE_SLEEP		0x8
+#define RES_STATE_OFF		0x0
+
+/* Power resources */
+
+/* Power providers */
+#define RES_VAUX1               1
+#define RES_VAUX2               2
+#define RES_VAUX3               3
+#define RES_VAUX4               4
+#define RES_VMMC1               5
+#define RES_VMMC2               6
+#define RES_VPLL1               7
+#define RES_VPLL2               8
+#define RES_VSIM                9
+#define RES_VDAC                10
+#define RES_VINTANA1            11
+#define RES_VINTANA2            12
+#define RES_VINTDIG             13
+#define RES_VIO                 14
+#define RES_VDD1                15
+#define RES_VDD2                16
+#define RES_VUSB_1V5            17
+#define RES_VUSB_1V8            18
+#define RES_VUSB_3V1            19
+#define RES_VUSBCP              20
+#define RES_REGEN               21
+/* Reset and control */
+#define RES_NRES_PWRON          22
+#define RES_CLKEN               23
+#define RES_SYSEN               24
+#define RES_HFCLKOUT            25
+#define RES_32KCLKOUT           26
+#define RES_RESET               27
+/* Power Reference */
+#define RES_Main_Ref            28
+
+#define TOTAL_RESOURCES		28
+/*
+ * Power Bus Message Format ... these can be sent individually by Linux,
+ * but are usually part of downloaded scripts that are run when various
+ * power events are triggered.
+ *
+ *  Broadcast Message (16 Bits):
+ *    DEV_GRP[15:13] MT[12]  RES_GRP[11:9]  RES_TYPE2[8:7] RES_TYPE[6:4]
+ *    RES_STATE[3:0]
+ *
+ *  Singular Message (16 Bits):
+ *    DEV_GRP[15:13] MT[12]  RES_ID[11:4]  RES_STATE[3:0]
+ */
+
+#define MSG_BROADCAST(devgrp, grp, type, type2, state) \
+	((devgrp) << 13 | 1 << 12 | (grp) << 9 | (type2) << 7 \
+	| (type) << 4 | (state))
+
+#define MSG_SINGULAR(devgrp, id, state) \
+	((devgrp) << 13 | 0 << 12 | (id) << 4 | (state))
+
+#define MSG_BROADCAST_ALL(devgrp, state) \
+	((devgrp) << 5 | (state))
+
+#define MSG_BROADCAST_REF MSG_BROADCAST_ALL
+#define MSG_BROADCAST_PROV MSG_BROADCAST_ALL
+#define MSG_BROADCAST__CLK_RST MSG_BROADCAST_ALL
+
 /* Power Managment Receiver */
 #define TWL4030_PM_RECEIVER_SC_CONFIG			0x5B
 #define TWL4030_PM_RECEIVER_SC_DETECT1			0x5C
@@ -311,6 +408,7 @@
 #define TWL4030_PM_RECEIVER_VDAC_VSEL_18		0x03
 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_30		0x02
 #define TWL4030_PM_RECEIVER_VMMC1_VSEL_32		0x03
+#define TWL4030_PM_RECEIVER_VSIM_VSEL_18		0x03
 
 /* Device Selection in PM Receiver Module */
 #define TWL4030_PM_RECEIVER_DEV_GRP_P1			0x20
diff --git a/include/u-boot/zlib.h b/include/u-boot/zlib.h
index b611fe7..e23ceb5 100644
--- a/include/u-boot/zlib.h
+++ b/include/u-boot/zlib.h
@@ -505,7 +505,7 @@
 #define Z_DEFLATED   8
 /* The deflate compression method (the only one supported in this version) */
 
-#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
+#define Z_NULL  (void *)0  /* for initializing zalloc, zfree, opaque */
 
                         /* basic functions */
 
diff --git a/lib/libfdt/Makefile b/lib/libfdt/Makefile
index c965577..0693d4b 100644
--- a/lib/libfdt/Makefile
+++ b/lib/libfdt/Makefile
@@ -27,7 +27,7 @@
 
 SOBJS	=
 
-COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o
+COBJS-libfdt += fdt.o fdt_ro.o fdt_rw.o fdt_strerror.o fdt_sw.o fdt_wip.o fdt_empty_tree.o
 
 COBJS-$(CONFIG_OF_LIBFDT) += $(COBJS-libfdt)
 COBJS-$(CONFIG_FIT) += $(COBJS-libfdt)
diff --git a/lib/libfdt/fdt_empty_tree.c b/lib/libfdt/fdt_empty_tree.c
new file mode 100644
index 0000000..f72d13b
--- /dev/null
+++ b/lib/libfdt/fdt_empty_tree.c
@@ -0,0 +1,84 @@
+/*
+ * libfdt - Flat Device Tree manipulation
+ * Copyright (C) 2012 David Gibson, IBM Corporation.
+ *
+ * libfdt is dual licensed: you can use it either under the terms of
+ * the GPL, or the BSD license, at your option.
+ *
+ *  a) This library is free software; you can redistribute it and/or
+ *     modify it under the terms of the GNU General Public License as
+ *     published by the Free Software Foundation; either version 2 of the
+ *     License, or (at your option) any later version.
+ *
+ *     This library is distributed in the hope that it will be useful,
+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *     GNU General Public License for more details.
+ *
+ *     You should have received a copy of the GNU General Public
+ *     License along with this library; if not, write to the Free
+ *     Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ *     MA 02110-1301 USA
+ *
+ * Alternatively,
+ *
+ *  b) Redistribution and use in source and binary forms, with or
+ *     without modification, are permitted provided that the following
+ *     conditions are met:
+ *
+ *     1. Redistributions of source code must retain the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer.
+ *     2. Redistributions in binary form must reproduce the above
+ *        copyright notice, this list of conditions and the following
+ *        disclaimer in the documentation and/or other materials
+ *        provided with the distribution.
+ *
+ *     THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ *     CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ *     INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *     MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *     DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
+ *     CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *     SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *     NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ *     LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ *     HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ *     CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+ *     OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
+ *     EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include "libfdt_env.h"
+
+#include <fdt.h>
+#include <libfdt.h>
+
+#include "libfdt_internal.h"
+
+int fdt_create_empty_tree(void *buf, int bufsize)
+{
+	int err;
+
+	err = fdt_create(buf, bufsize);
+	if (err)
+		return err;
+
+	err = fdt_finish_reservemap(buf);
+	if (err)
+		return err;
+
+	err = fdt_begin_node(buf, "");
+	if (err)
+		return err;
+
+	err =  fdt_end_node(buf);
+	if (err)
+		return err;
+
+	err = fdt_finish(buf);
+	if (err)
+		return err;
+
+	return fdt_open_into(buf, buf, bufsize);
+}
+
diff --git a/lib/libfdt/fdt_rw.c b/lib/libfdt/fdt_rw.c
index 5c27a67..5ed23d6 100644
--- a/lib/libfdt/fdt_rw.c
+++ b/lib/libfdt/fdt_rw.c
@@ -293,6 +293,33 @@
 	return 0;
 }
 
+int fdt_appendprop(void *fdt, int nodeoffset, const char *name,
+		   const void *val, int len)
+{
+	struct fdt_property *prop;
+	int err, oldlen, newlen;
+
+	FDT_RW_CHECK_HEADER(fdt);
+
+	prop = fdt_get_property_w(fdt, nodeoffset, name, &oldlen);
+	if (prop) {
+		newlen = len + oldlen;
+		err = _fdt_splice_struct(fdt, prop->data,
+					 FDT_TAGALIGN(oldlen),
+					 FDT_TAGALIGN(newlen));
+		if (err)
+			return err;
+		prop->len = cpu_to_fdt32(newlen);
+		memcpy(prop->data + oldlen, val, len);
+	} else {
+		err = _fdt_add_property(fdt, nodeoffset, name, len, &prop);
+		if (err)
+			return err;
+		memcpy(prop->data, val, len);
+	}
+	return 0;
+}
+
 int fdt_delprop(void *fdt, int nodeoffset, const char *name)
 {
 	struct fdt_property *prop;
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index d762763..b7a79c0 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -28,7 +28,7 @@
 /* some reluctance to put this into a new limits.h, so it is here */
 #define INT_MAX		((int)(~0U>>1))
 
-const char hex_asc[] = "0123456789abcdef";
+static const char hex_asc[] = "0123456789abcdef";
 #define hex_asc_lo(x)   hex_asc[((x) & 0x0f)]
 #define hex_asc_hi(x)   hex_asc[((x) & 0xf0) >> 4]
 
@@ -395,7 +395,7 @@
 {
 	int len, i;
 
-	if (s == 0)
+	if (s == NULL)
 		s = "<NULL>";
 
 	len = strnlen(s, precision);
@@ -495,9 +495,15 @@
 static char *pointer(const char *fmt, char *buf, char *end, void *ptr,
 		int field_width, int precision, int flags)
 {
+	/*
+	 * Being a boot loader, we explicitly allow pointers to
+	 * (physical) address null.
+	 */
+#if 0
 	if (!ptr)
 		return string(buf, end, "(null)", field_width, precision,
 			      flags);
+#endif
 
 #ifdef CONFIG_CMD_NET
 	switch (*fmt) {
diff --git a/lib/zlib/adler32.c b/lib/zlib/adler32.c
index dc9480d..b468441 100644
--- a/lib/zlib/adler32.c
+++ b/lib/zlib/adler32.c
@@ -54,10 +54,7 @@
 #endif
 
 /* ========================================================================= */
-uLong ZEXPORT adler32(adler, buf, len)
-    uLong adler;
-    const Bytef *buf;
-    uInt len;
+uLong ZEXPORT adler32(uLong adler, const Bytef *buf, uInt len)
 {
     unsigned long sum2;
     unsigned n;
diff --git a/lib/zlib/inffast.c b/lib/zlib/inffast.c
index 38f2f90..0700e04 100644
--- a/lib/zlib/inffast.c
+++ b/lib/zlib/inffast.c
@@ -66,9 +66,8 @@
       requires strm->avail_out >= 258 for each loop to avoid checking for
       output space.
  */
-void inflate_fast(strm, start)
-z_streamp strm;
-unsigned start;         /* inflate()'s starting value for strm->avail_out */
+void inflate_fast(z_streamp strm, unsigned start)
+/* start: inflate()'s starting value for strm->avail_out */
 {
     struct inflate_state FAR *state;
     unsigned char FAR *in;      /* local strm->next_in */
diff --git a/lib/zlib/inflate.c b/lib/zlib/inflate.c
index 1eef609..6411c47 100644
--- a/lib/zlib/inflate.c
+++ b/lib/zlib/inflate.c
@@ -5,8 +5,7 @@
 local void fixedtables OF((struct inflate_state FAR *state));
 local int updatewindow OF((z_streamp strm, unsigned out));
 
-int ZEXPORT inflateReset(strm)
-z_streamp strm;
+int ZEXPORT inflateReset(z_streamp strm)
 {
     struct inflate_state FAR *state;
 
@@ -31,11 +30,8 @@
     return Z_OK;
 }
 
-int ZEXPORT inflateInit2_(strm, windowBits, version, stream_size)
-z_streamp strm;
-int windowBits;
-const char *version;
-int stream_size;
+int ZEXPORT inflateInit2_(z_streamp strm, int windowBits, const char *version,
+			  int stream_size)
 {
     struct inflate_state FAR *state;
 
@@ -74,16 +70,12 @@
     return inflateReset(strm);
 }
 
-int ZEXPORT inflateInit_(strm, version, stream_size)
-z_streamp strm;
-const char *version;
-int stream_size;
+int ZEXPORT inflateInit_(z_streamp strm, const char *version, int stream_size)
 {
     return inflateInit2_(strm, DEF_WBITS, version, stream_size);
 }
 
-local void fixedtables(state)
-struct inflate_state FAR *state;
+local void fixedtables(struct inflate_state FAR *state)
 {
     state->lencode = lenfix;
     state->lenbits = 9;
@@ -105,9 +97,7 @@
    output will fall in the output data, making match copies simpler and faster.
    The advantage may be dependent on the size of the processor's data caches.
  */
-local int updatewindow(strm, out)
-z_streamp strm;
-unsigned out;
+local int updatewindow(z_streamp strm, unsigned out)
 {
     struct inflate_state FAR *state;
     unsigned copy, dist;
@@ -335,9 +325,7 @@
    when flush is set to Z_FINISH, inflate() cannot return Z_OK.  Instead it
    will return Z_BUF_ERROR if it has not reached the end of the stream.
  */
-int ZEXPORT inflate(strm, flush)
-z_streamp strm;
-int flush;
+int ZEXPORT inflate(z_streamp strm, int flush)
 {
     struct inflate_state FAR *state;
     unsigned char FAR *next;    /* next input */
@@ -938,8 +926,7 @@
     return ret;
 }
 
-int ZEXPORT inflateEnd(strm)
-z_streamp strm;
+int ZEXPORT inflateEnd(z_streamp strm)
 {
     struct inflate_state FAR *state;
     if (strm == Z_NULL || strm->state == Z_NULL || strm->zfree == (free_func)0)
diff --git a/lib/zlib/inftrees.c b/lib/zlib/inftrees.c
index c6d4c03..7474a52 100644
--- a/lib/zlib/inftrees.c
+++ b/lib/zlib/inftrees.c
@@ -29,13 +29,9 @@
    table index bits.  It will differ if the request is greater than the
    longest code or if it is less than the shortest code.
  */
-int inflate_table(type, lens, codes, table, bits, work)
-codetype type;
-unsigned short FAR *lens;
-unsigned codes;
-code FAR * FAR *table;
-unsigned FAR *bits;
-unsigned short FAR *work;
+int inflate_table(codetype type, unsigned short FAR *lens, unsigned codes,
+		  code FAR * FAR *table, unsigned FAR *bits,
+		  unsigned short FAR *work)
 {
     unsigned len;               /* a code's length in bits */
     unsigned sym;               /* index of code symbols */
diff --git a/lib/zlib/zutil.c b/lib/zlib/zutil.c
index 65f9554..14f6eb1 100644
--- a/lib/zlib/zutil.c
+++ b/lib/zlib/zutil.c
@@ -49,10 +49,7 @@
 extern void     free   OF((voidpf ptr));
 #endif
 
-voidpf zcalloc (opaque, items, size)
-	voidpf opaque;
-	unsigned items;
-	unsigned size;
+voidpf zcalloc(voidpf opaque, unsigned items, unsigned size)
 {
 	if (opaque)
 		items += size - size; /* make compiler happy */
@@ -60,10 +57,7 @@
 		(voidpf)calloc(items, size);
 }
 
-void  zcfree (opaque, ptr, nb)
-	voidpf opaque;
-	voidpf ptr;
-	unsigned nb;
+void  zcfree(voidpf opaque, voidpf ptr, unsigned nb)
 {
 	free(ptr);
 	if (opaque)
diff --git a/nand_spl/board/freescale/mpc8536ds/Makefile b/nand_spl/board/freescale/mpc8536ds/Makefile
index 43da3df..e5388d8 100644
--- a/nand_spl/board/freescale/mpc8536ds/Makefile
+++ b/nand_spl/board/freescale/mpc8536ds/Makefile
@@ -32,6 +32,7 @@
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -61,8 +62,12 @@
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile
index 43da3df..e5388d8 100644
--- a/nand_spl/board/freescale/mpc8569mds/Makefile
+++ b/nand_spl/board/freescale/mpc8569mds/Makefile
@@ -32,6 +32,7 @@
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -61,8 +62,12 @@
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
diff --git a/nand_spl/board/freescale/mpc8572ds/Makefile b/nand_spl/board/freescale/mpc8572ds/Makefile
index 43da3df..e5388d8 100644
--- a/nand_spl/board/freescale/mpc8572ds/Makefile
+++ b/nand_spl/board/freescale/mpc8572ds/Makefile
@@ -32,6 +32,7 @@
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -61,8 +62,12 @@
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
diff --git a/nand_spl/board/freescale/mx31pdk/Makefile b/nand_spl/board/freescale/mx31pdk/Makefile
index 87784d2..43e72c4 100644
--- a/nand_spl/board/freescale/mx31pdk/Makefile
+++ b/nand_spl/board/freescale/mx31pdk/Makefile
@@ -6,6 +6,7 @@
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
 	   $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
@@ -36,8 +37,12 @@
 		-Map $(nandobj)u-boot-spl.map \
 		-o $@
 
-$(nandobj)u-boot.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 #########################################################################
 
diff --git a/nand_spl/board/freescale/mx31pdk/u-boot.lds b/nand_spl/board/freescale/mx31pdk/u-boot.lds
index a130a1f..a26110f 100644
--- a/nand_spl/board/freescale/mx31pdk/u-boot.lds
+++ b/nand_spl/board/freescale/mx31pdk/u-boot.lds
@@ -46,9 +46,11 @@
 	}
 
 	. = ALIGN(4);
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+		#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 
diff --git a/nand_spl/board/freescale/p1010rdb/Makefile b/nand_spl/board/freescale/p1010rdb/Makefile
index cdbd492..f270faa 100644
--- a/nand_spl/board/freescale/p1010rdb/Makefile
+++ b/nand_spl/board/freescale/p1010rdb/Makefile
@@ -32,6 +32,7 @@
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) $(LDFLAGS) \
 	   $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -62,8 +63,12 @@
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
diff --git a/nand_spl/board/freescale/p1023rds/Makefile b/nand_spl/board/freescale/p1023rds/Makefile
index da43521..b288284 100644
--- a/nand_spl/board/freescale/p1023rds/Makefile
+++ b/nand_spl/board/freescale/p1023rds/Makefile
@@ -27,6 +27,7 @@
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -57,8 +58,12 @@
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
diff --git a/nand_spl/board/freescale/p1_p2_rdb/Makefile b/nand_spl/board/freescale/p1_p2_rdb/Makefile
index 43da3df..e5388d8 100644
--- a/nand_spl/board/freescale/p1_p2_rdb/Makefile
+++ b/nand_spl/board/freescale/p1_p2_rdb/Makefile
@@ -32,6 +32,7 @@
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -61,8 +62,12 @@
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
diff --git a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
index 46cf709..7146d16 100644
--- a/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
+++ b/nand_spl/board/freescale/p1_p2_rdb_pc/Makefile
@@ -32,6 +32,7 @@
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot-nand_spl.lds -Ttext $(CONFIG_SYS_TEXT_BASE_SPL) \
 		$(LDFLAGS) $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_NAND_SPL
@@ -62,8 +63,12 @@
 		-Map $(nandobj)u-boot-spl.map \
 		-o $(nandobj)u-boot-spl
 
-$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot-nand_spl.lds: $(LDSCRIPT) $(LSTSCRIPT)
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 # create symbolic links for common files
 
diff --git a/nand_spl/board/karo/tx25/Makefile b/nand_spl/board/karo/tx25/Makefile
index 0336346..becf7fa 100644
--- a/nand_spl/board/karo/tx25/Makefile
+++ b/nand_spl/board/karo/tx25/Makefile
@@ -27,6 +27,7 @@
 nandobj	:= $(OBJTREE)/nand_spl/
 
 LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LSTSCRIPT= $(nandobj)/board/$(BOARDDIR)/u-boot.lst
 LDFLAGS := -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(LDFLAGS) \
 	   $(LDFLAGS_FINAL)
 AFLAGS	+= -DCONFIG_SPL_BUILD -DCONFIG_NAND_SPL
@@ -57,8 +58,12 @@
 		-Map $(nandobj)u-boot-spl.map \
 		-o $@
 
-$(nandobj)u-boot.lds: $(LDSCRIPT)
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@
+# The following line expands into whole rule which generates $(LSTSCRIPT),
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(LSTSCRIPT), $(OBJS)))
+$(nandobj)u-boot.lds: $(LDSCRIPT) $(LSTSCRIPT)
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj) -ansi -D__ASSEMBLY__ -P - <$< >$@
 
 #########################################################################
 
diff --git a/nand_spl/board/karo/tx25/u-boot.lds b/nand_spl/board/karo/tx25/u-boot.lds
index d2b08f6..ee36131 100644
--- a/nand_spl/board/karo/tx25/u-boot.lds
+++ b/nand_spl/board/karo/tx25/u-boot.lds
@@ -46,9 +46,11 @@
 	}
 
 	. = ALIGN(4);
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 
diff --git a/nand_spl/board/samsung/smdk6400/u-boot.lds b/nand_spl/board/samsung/smdk6400/u-boot.lds
index 567f635..2ed6466 100644
--- a/nand_spl/board/samsung/smdk6400/u-boot.lds
+++ b/nand_spl/board/samsung/smdk6400/u-boot.lds
@@ -50,9 +50,11 @@
 	. = ALIGN(4);
 	.got : { *(.got) }
 
-	__u_boot_cmd_start = .;
-	.u_boot_cmd : { *(.u_boot_cmd) }
-	__u_boot_cmd_end = .;
+
+	. = ALIGN(4);
+	.u_boot_list : {
+	#include <u-boot.lst>
+	}
 
 	. = ALIGN(4);
 
diff --git a/net/arp.c b/net/arp.c
index 8e1d2ed..20c6b2d 100644
--- a/net/arp.c
+++ b/net/arp.c
@@ -27,15 +27,15 @@
 #endif
 
 IPaddr_t	NetArpWaitPacketIP;
-IPaddr_t	NetArpWaitReplyIP;
+static IPaddr_t	NetArpWaitReplyIP;
 /* MAC address of waiting packet's destination */
 uchar	       *NetArpWaitPacketMAC;
 int		NetArpWaitTxPacketSize;
 ulong		NetArpWaitTimerStart;
 int		NetArpWaitTry;
 
-uchar	       *NetArpTxPacket;	/* THE ARP transmit packet */
-uchar		NetArpPacketBuf[PKTSIZE_ALIGN + PKTALIGN];
+static uchar   *NetArpTxPacket;	/* THE ARP transmit packet */
+static uchar	NetArpPacketBuf[PKTSIZE_ALIGN + PKTALIGN];
 
 void ArpInit(void)
 {
diff --git a/net/bootp.c b/net/bootp.c
index cd5c5dd..4300f1c 100644
--- a/net/bootp.c
+++ b/net/bootp.c
@@ -41,9 +41,9 @@
 int		BootpTry;
 
 #if defined(CONFIG_CMD_DHCP)
-dhcp_state_t dhcp_state = INIT;
-unsigned long dhcp_leasetime;
-IPaddr_t NetDHCPServerIP;
+static dhcp_state_t dhcp_state = INIT;
+static unsigned long dhcp_leasetime;
+static IPaddr_t NetDHCPServerIP;
 static void DhcpHandler(uchar *pkt, unsigned dest, IPaddr_t sip, unsigned src,
 			unsigned len);
 
diff --git a/net/net.c b/net/net.c
index 569fec4..82c4cc9 100644
--- a/net/net.c
+++ b/net/net.c
@@ -180,7 +180,7 @@
 int		NetTimeOffset;
 #endif
 
-uchar PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN];
+static uchar PktBuf[(PKTBUFSRX+1) * PKTSIZE_ALIGN + PKTALIGN];
 
 /* Receive packet */
 uchar *NetRxPackets[PKTBUFSRX];
diff --git a/net/ping.h b/net/ping.h
index fd8d8d9..8c71be4 100644
--- a/net/ping.h
+++ b/net/ping.h
@@ -8,8 +8,6 @@
  *	Copyright 2000-2002 Wolfgang Denk, wd@denx.de
  */
 
-#if defined(CONFIG_CMD_PING)
-
 #ifndef __PING_H__
 #define __PING_H__
 
@@ -31,4 +29,3 @@
 void ping_receive(struct ethernet_hdr *et, struct ip_udp_hdr *ip, int len);
 
 #endif /* __PING_H__ */
-#endif
diff --git a/net/tftp.h b/net/tftp.h
index 18e4c9c..2b686e3 100644
--- a/net/tftp.h
+++ b/net/tftp.h
@@ -22,6 +22,9 @@
 extern void TftpStartServer(void);	/* Wait for incoming TFTP put */
 #endif
 
+extern ulong TftpRRQTimeoutMSecs;
+extern int TftpRRQTimeoutCountMax;
+
 /**********************************************************************/
 
 #endif /* __TFTP_H__ */
diff --git a/post/cpu/mpc8xx/ether.c b/post/cpu/mpc8xx/ether.c
index fcbb300..728f7e0 100644
--- a/post/cpu/mpc8xx/ether.c
+++ b/post/cpu/mpc8xx/ether.c
@@ -381,49 +381,6 @@
 	immr->im_cpm.cp_scc[scc_index].scc_psmr = SCC_PSMR_ENCRC |
 			SCC_PSMR_NIB22 | SCC_PSMR_LPB;
 
-#if 0
-	/*
-	 * Configure Ethernet TENA Signal
-	 */
-
-#if (defined(PC_ENET_TENA) && !defined(PB_ENET_TENA))
-	immr->im_ioport.iop_pcpar |= PC_ENET_TENA;
-	immr->im_ioport.iop_pcdir &= ~PC_ENET_TENA;
-#elif (defined(PB_ENET_TENA) && !defined(PC_ENET_TENA))
-	immr->im_cpm.cp_pbpar |= PB_ENET_TENA;
-	immr->im_cpm.cp_pbdir |= PB_ENET_TENA;
-#else
-#error Configuration Error: exactly ONE of PB_ENET_TENA, PC_ENET_TENA must be defined
-#endif
-
-#if defined(CONFIG_ADS) && defined(CONFIG_MPC860)
-	/*
-	 * Port C is used to control the PHY,MC68160.
-	 */
-	immr->im_ioport.iop_pcdir |=
-			(PC_ENET_ETHLOOP | PC_ENET_TPFLDL | PC_ENET_TPSQEL);
-
-	immr->im_ioport.iop_pcdat |= PC_ENET_TPFLDL;
-	immr->im_ioport.iop_pcdat &= ~(PC_ENET_ETHLOOP | PC_ENET_TPSQEL);
-	*((uint *) BCSR1) &= ~BCSR1_ETHEN;
-#endif /* MPC860ADS */
-
-#if defined(CONFIG_AMX860)
-	/*
-	 * Port B is used to control the PHY,MC68160.
-	 */
-	immr->im_cpm.cp_pbdir |=
-			(PB_ENET_ETHLOOP | PB_ENET_TPFLDL | PB_ENET_TPSQEL);
-
-	immr->im_cpm.cp_pbdat |= PB_ENET_TPFLDL;
-	immr->im_cpm.cp_pbdat &= ~(PB_ENET_ETHLOOP | PB_ENET_TPSQEL);
-
-	immr->im_ioport.iop_pddir |= PD_ENET_ETH_EN;
-	immr->im_ioport.iop_pddat &= ~PD_ENET_ETH_EN;
-#endif /* AMX860 */
-
-#endif /* 0 */
-
 #ifdef CONFIG_RPXCLASSIC
 	*((uchar *) BCSR0) &= ~BCSR0_ETHLPBK;
 	*((uchar *) BCSR0) |= (BCSR0_ETHEN | BCSR0_COLTEST | BCSR0_FULLDPLX);
@@ -449,7 +406,7 @@
 	 */
 #if defined (CONFIG_FADS)
 	udelay (10000);				/* wait 10 ms */
-#elif defined (CONFIG_AMX860) || defined(CONFIG_RPXCLASSIC)
+#elif defined(CONFIG_RPXCLASSIC)
 	udelay (100000);			/* wait 100 ms */
 #endif
 }
diff --git a/spl/.gitignore b/spl/.gitignore
index 7c88147..8cf487e 100644
--- a/spl/.gitignore
+++ b/spl/.gitignore
@@ -2,3 +2,4 @@
 u-boot-spl.bin
 u-boot-spl.lds
 u-boot-spl.map
+u-boot.lst
diff --git a/spl/Makefile b/spl/Makefile
index 58ef40a..6a79c3c 100644
--- a/spl/Makefile
+++ b/spl/Makefile
@@ -112,16 +112,13 @@
 	$(shell $(LD) --version | \
 	  sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p')
 
-ifdef CONFIG_OMAP
 $(OBJTREE)/MLO:	$(obj)u-boot-spl.bin
 	$(OBJTREE)/tools/mkimage -T omapimage \
 		-a $(CONFIG_SPL_TEXT_BASE) -d $< $@
-endif
-ifdef CONFIG_AM33XX
-$(OBJTREE)/MLO:	$(obj)u-boot-spl.bin
-	$(OBJTREE)/tools/mkimage -T omapimage \
+
+$(OBJTREE)/MLO.byteswap: $(obj)u-boot-spl.bin
+	$(OBJTREE)/tools/mkimage -T omapimage -n byteswap \
 		-a $(CONFIG_SPL_TEXT_BASE) -d $< $@
-endif
 
 ifneq ($(CONFIG_IMX_CONFIG),)
 $(OBJTREE)/SPL:	$(obj)u-boot-spl.bin
@@ -160,8 +157,12 @@
 $(LIBS):	depend
 	$(MAKE) -C $(SRCTREE)$(dir $(subst $(SPLTREE),,$@))
 
-$(obj)u-boot-spl.lds: $(LDSCRIPT) depend
-	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - < $< > $@
+# The following line expands into whole rule which generates u-boot.lst,
+# the file containing u-boots LG-array linker section. This is included into
+# $(LDSCRIPT). The function make_u_boot_list is defined in helper.mk file.
+$(eval $(call make_u_boot_list, $(obj)u-boot.lst, $(LIBS)))
+$(obj)u-boot-spl.lds: $(LDSCRIPT) $(obj)u-boot.lst depend
+	$(CPP) $(CPPFLAGS) $(LDPPFLAGS) -I$(obj). -ansi -D__ASSEMBLY__ -P - < $< > $@
 
 depend:	$(obj).depend
 .PHONY: depend
diff --git a/tools/env/fw_env.c b/tools/env/fw_env.c
index ab8c15d..9b023e8 100644
--- a/tools/env/fw_env.c
+++ b/tools/env/fw_env.c
@@ -119,102 +119,8 @@
 /* obsolete_flag must be 0 to efficiently set it on NOR flash without erasing */
 static unsigned char obsolete_flag = 0;
 
-
-static char default_environment[] = {
-#if defined(CONFIG_BOOTARGS)
-	"bootargs=" CONFIG_BOOTARGS "\0"
-#endif
-#if defined(CONFIG_BOOTCOMMAND)
-	"bootcmd=" CONFIG_BOOTCOMMAND "\0"
-#endif
-#if defined(CONFIG_RAMBOOTCOMMAND)
-	"ramboot=" CONFIG_RAMBOOTCOMMAND "\0"
-#endif
-#if defined(CONFIG_NFSBOOTCOMMAND)
-	"nfsboot=" CONFIG_NFSBOOTCOMMAND "\0"
-#endif
-#if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
-	"bootdelay=" __stringify(CONFIG_BOOTDELAY) "\0"
-#endif
-#if defined(CONFIG_BAUDRATE) && (CONFIG_BAUDRATE >= 0)
-	"baudrate=" __stringify(CONFIG_BAUDRATE) "\0"
-#endif
-#ifdef	CONFIG_LOADS_ECHO
-	"loads_echo=" __stringify(CONFIG_LOADS_ECHO) "\0"
-#endif
-#ifdef	CONFIG_ETHADDR
-	"ethaddr=" __stringify(CONFIG_ETHADDR) "\0"
-#endif
-#ifdef	CONFIG_ETH1ADDR
-	"eth1addr=" __stringify(CONFIG_ETH1ADDR) "\0"
-#endif
-#ifdef	CONFIG_ETH2ADDR
-	"eth2addr=" __stringify(CONFIG_ETH2ADDR) "\0"
-#endif
-#ifdef	CONFIG_ETH3ADDR
-	"eth3addr=" __stringify(CONFIG_ETH3ADDR) "\0"
-#endif
-#ifdef	CONFIG_ETH4ADDR
-	"eth4addr=" __stringify(CONFIG_ETH4ADDR) "\0"
-#endif
-#ifdef	CONFIG_ETH5ADDR
-	"eth5addr=" __stringify(CONFIG_ETH5ADDR) "\0"
-#endif
-#ifdef	CONFIG_ETHPRIME
-	"ethprime=" CONFIG_ETHPRIME "\0"
-#endif
-#ifdef	CONFIG_IPADDR
-	"ipaddr=" __stringify(CONFIG_IPADDR) "\0"
-#endif
-#ifdef	CONFIG_SERVERIP
-	"serverip=" __stringify(CONFIG_SERVERIP) "\0"
-#endif
-#ifdef	CONFIG_SYS_AUTOLOAD
-	"autoload=" CONFIG_SYS_AUTOLOAD "\0"
-#endif
-#ifdef	CONFIG_ROOTPATH
-	"rootpath=" CONFIG_ROOTPATH "\0"
-#endif
-#ifdef	CONFIG_GATEWAYIP
-	"gatewayip=" __stringify(CONFIG_GATEWAYIP) "\0"
-#endif
-#ifdef	CONFIG_NETMASK
-	"netmask=" __stringify(CONFIG_NETMASK) "\0"
-#endif
-#ifdef	CONFIG_HOSTNAME
-	"hostname=" __stringify(CONFIG_HOSTNAME) "\0"
-#endif
-#ifdef	CONFIG_BOOTFILE
-	"bootfile=" CONFIG_BOOTFILE "\0"
-#endif
-#ifdef	CONFIG_LOADADDR
-	"loadaddr=" __stringify(CONFIG_LOADADDR) "\0"
-#endif
-#ifdef	CONFIG_PREBOOT
-	"preboot=" CONFIG_PREBOOT "\0"
-#endif
-#ifdef	CONFIG_CLOCKS_IN_MHZ
-	"clocks_in_mhz=" "1" "\0"
-#endif
-#if defined(CONFIG_PCI_BOOTDELAY) && (CONFIG_PCI_BOOTDELAY > 0)
-	"pcidelay=" __stringify(CONFIG_PCI_BOOTDELAY) "\0"
-#endif
-#ifdef	CONFIG_ENV_VARS_UBOOT_CONFIG
-	"arch=" CONFIG_SYS_ARCH "\0"
-	"cpu=" CONFIG_SYS_CPU "\0"
-	"board=" CONFIG_SYS_BOARD "\0"
-#ifdef CONFIG_SYS_VENDOR
-	"vendor=" CONFIG_SYS_VENDOR "\0"
-#endif
-#ifdef CONFIG_SYS_SOC
-	"soc=" CONFIG_SYS_SOC "\0"
-#endif
-#endif
-#ifdef  CONFIG_EXTRA_ENV_SETTINGS
-	CONFIG_EXTRA_ENV_SETTINGS
-#endif
-	"\0"		/* Termimate struct environment data with 2 NULs */
-};
+#define DEFAULT_ENV_INSTANCE_STATIC
+#include <env_default.h>
 
 static int flash_io (int mode);
 static char *envmatch (char * s1, char * s2);
@@ -494,6 +400,8 @@
 		char *val = argv[i];
 		size_t val_len = strlen(val);
 
+		if (value)
+			value[len - 1] = ' ';
 		value = realloc(value, len + val_len + 1);
 		if (!value) {
 			fprintf(stderr,
@@ -504,9 +412,8 @@
 
 		memcpy(value + len, val, val_len);
 		len += val_len;
-		value[len++] = ' ';
+		value[len++] = '\0';
 	}
-	value[len - 1] = '\0';
 
 	fw_env_write(name, value);
 
@@ -738,8 +645,8 @@
 			return -1;
 		}
 #ifdef DEBUG
-		fprintf (stderr, "Read 0x%x bytes at 0x%llx\n",
-			 rc, blockstart + block_seek);
+		fprintf(stderr, "Read 0x%x bytes at 0x%llx on %s\n",
+			 rc, blockstart + block_seek, DEVNAME(dev));
 #endif
 		processed += readlen;
 		readlen = min (blocklen, count - processed);
@@ -818,6 +725,18 @@
 		if (write_total != rc)
 			return -1;
 
+#ifdef DEBUG
+		fprintf(stderr, "Preserving data ");
+		if (block_seek != 0)
+			fprintf(stderr, "0x%x - 0x%lx", 0, block_seek - 1);
+		if (block_seek + count != write_total) {
+			if (block_seek != 0)
+				fprintf(stderr, " and ");
+			fprintf(stderr, "0x%lx - 0x%x",
+				block_seek + count, write_total - 1);
+		}
+		fprintf(stderr, "\n");
+#endif
 		/* Overwrite the old environment */
 		memcpy (data + block_seek, buf, count);
 	} else {
@@ -876,7 +795,8 @@
 		}
 
 #ifdef DEBUG
-		printf ("Write 0x%x bytes at 0x%llx\n", erasesize, blockstart);
+		fprintf(stderr, "Write 0x%x bytes at 0x%llx\n", erasesize,
+			blockstart);
 #endif
 		if (write (fd, data + processed, erasesize) != erasesize) {
 			fprintf (stderr, "Write error on %s: %s\n",
@@ -943,7 +863,7 @@
 	}
 
 #ifdef DEBUG
-	printf ("Writing new environment at 0x%lx on %s\n",
+	fprintf(stderr, "Writing new environment at 0x%lx on %s\n",
 		DEVOFFSET (dev_target), DEVNAME (dev_target));
 #endif
 	rc = flash_write_buf(dev_target, fd_target, environment.image,
@@ -957,7 +877,8 @@
 		off_t offset = DEVOFFSET (dev_current) +
 			offsetof (struct env_image_redundant, flags);
 #ifdef DEBUG
-		printf ("Setting obsolete flag in environment at 0x%lx on %s\n",
+		fprintf(stderr,
+			"Setting obsolete flag in environment at 0x%lx on %s\n",
 			DEVOFFSET (dev_current), DEVNAME (dev_current));
 #endif
 		flash_flag_obsolete (dev_current, fd_current, offset);
@@ -1224,6 +1145,9 @@
 			/* Other pointers are already set */
 			free (addr1);
 		}
+#ifdef DEBUG
+		fprintf(stderr, "Selected env in %s\n", DEVNAME(dev_current));
+#endif
 	}
 	return 0;
 }
diff --git a/tools/omapimage.c b/tools/omapimage.c
index 5e739ac..d242cca 100644
--- a/tools/omapimage.c
+++ b/tools/omapimage.c
@@ -42,6 +42,18 @@
 #define OMAP_GP_HDR_SIZE (sizeof(struct gp_header))
 #define OMAP_FILE_HDR_SIZE (OMAP_CH_HDR_SIZE+OMAP_GP_HDR_SIZE)
 
+static int do_swap32 = 0;
+
+static uint32_t omapimage_swap32(uint32_t data)
+{
+	uint32_t result = 0;
+	result  = (data & 0xFF000000) >> 24;
+	result |= (data & 0x00FF0000) >> 8;
+	result |= (data & 0x0000FF00) << 8;
+	result |= (data & 0x000000FF) << 24;
+	return result;
+}
+
 static uint8_t omapimage_header[OMAP_FILE_HDR_SIZE];
 
 static int omapimage_check_image_types(uint8_t type)
@@ -80,12 +92,17 @@
 {
 	struct ch_toc *toc = (struct ch_toc *)ptr;
 	struct gp_header *gph = (struct gp_header *)(ptr+OMAP_CH_HDR_SIZE);
-	uint32_t offset, size;
+	uint32_t offset, size, gph_size, gph_load_addr;
 
 	while (toc->section_offset != 0xffffffff
 			&& toc->section_size != 0xffffffff) {
-		offset = toc->section_offset;
-		size = toc->section_size;
+		if (do_swap32) {
+			offset = omapimage_swap32(toc->section_offset);
+			size = omapimage_swap32(toc->section_size);
+		} else {
+			offset = toc->section_offset;
+			size = toc->section_size;
+		}
 		if (!offset || !size)
 			return -1;
 		if (offset >= OMAP_CH_HDR_SIZE ||
@@ -93,9 +110,18 @@
 			return -1;
 		toc++;
 	}
-	if (!valid_gph_size(gph->size))
+
+	if (do_swap32) {
+		gph_size = omapimage_swap32(gph->size);
+		gph_load_addr = omapimage_swap32(gph->load_addr);
+	} else {
+		gph_size = gph->size;
+		gph_load_addr = gph->load_addr;
+	}
+
+	if (!valid_gph_size(gph_size))
 		return -1;
-	if (!valid_gph_load_addr(gph->load_addr))
+	if (!valid_gph_load_addr(gph_load_addr))
 		return -1;
 
 	return 0;
@@ -128,12 +154,17 @@
 	const struct ch_toc *toc = (struct ch_toc *)ptr;
 	const struct gp_header *gph =
 			(struct gp_header *)(ptr+OMAP_CH_HDR_SIZE);
-	uint32_t offset, size;
+	uint32_t offset, size, gph_size, gph_load_addr;
 
 	while (toc->section_offset != 0xffffffff
 			&& toc->section_size != 0xffffffff) {
-		offset = toc->section_offset;
-		size = toc->section_size;
+		if (do_swap32) {
+			offset = omapimage_swap32(toc->section_offset);
+			size = omapimage_swap32(toc->section_size);
+		} else {
+			offset = toc->section_offset;
+			size = toc->section_size;
+		}
 
 		if (offset >= OMAP_CH_HDR_SIZE ||
 		    offset+size >= OMAP_CH_HDR_SIZE)
@@ -148,22 +179,26 @@
 		toc++;
 	}
 
-	if (!valid_gph_size(gph->size)) {
-		fprintf(stderr,
-			"Error: invalid image size %x\n",
-			gph->size);
+	if (do_swap32) {
+		gph_size = omapimage_swap32(gph->size);
+		gph_load_addr = omapimage_swap32(gph->load_addr);
+	} else {
+		gph_size = gph->size;
+		gph_load_addr = gph->load_addr;
+	}
+
+	if (!valid_gph_size(gph_size)) {
+		fprintf(stderr, "Error: invalid image size %x\n", gph_size);
 		exit(EXIT_FAILURE);
 	}
 
-	if (!valid_gph_load_addr(gph->load_addr)) {
-		fprintf(stderr,
-			"Error: invalid image load address %x\n",
-			gph->size);
+	if (!valid_gph_load_addr(gph_load_addr)) {
+		fprintf(stderr, "Error: invalid image load address %x\n",
+				gph_load_addr);
 		exit(EXIT_FAILURE);
 	}
 
-	printf("GP Header: Size %x LoadAddr %x\n",
-		gph->size, gph->load_addr);
+	printf("GP Header: Size %x LoadAddr %x\n", gph_size, gph_load_addr);
 }
 
 static int toc_offset(void *hdr, void *member)
@@ -194,6 +229,18 @@
 
 	gph->size = sbuf->st_size - OMAP_FILE_HDR_SIZE;
 	gph->load_addr = params->addr;
+
+	if (strncmp(params->imagename, "byteswap", 8) == 0) {
+		do_swap32 = 1;
+		int swapped = 0;
+		uint32_t *data = (uint32_t *)ptr;
+
+		while (swapped <= (sbuf->st_size / sizeof(uint32_t))) {
+			*data = omapimage_swap32(*data);
+			swapped++;
+			data++;
+		}
+	}
 }
 
 int omapimage_check_params(struct mkimage_params *params)
diff --git a/tools/patman/gitutil.py b/tools/patman/gitutil.py
index 59eca99..72d37a0 100644
--- a/tools/patman/gitutil.py
+++ b/tools/patman/gitutil.py
@@ -38,7 +38,7 @@
     Return:
         Number of patches that exist on top of the branch
     """
-    pipe = [['git', 'log', '--oneline', '@{upstream}..'],
+    pipe = [['git', 'log', '--no-color', '--oneline', '@{upstream}..'],
             ['wc', '-l']]
     stdout = command.RunPipe(pipe, capture=True, oneline=True)
     patch_count = int(stdout)
diff --git a/tools/patman/patchstream.py b/tools/patman/patchstream.py
index 0503bac..f7ee75a 100644
--- a/tools/patman/patchstream.py
+++ b/tools/patman/patchstream.py
@@ -30,8 +30,8 @@
 from series import Series
 
 # Tags that we detect and remove
-re_remove = re.compile('^BUG=|^TEST=|^Change-Id:|^Review URL:'
-    '|Reviewed-on:|Reviewed-by:')
+re_remove = re.compile('^BUG=|^TEST=|^BRANCH=|^Change-Id:|^Review URL:'
+    '|Reviewed-on:|Reviewed-by:|Commit-Ready:')
 
 # Lines which are allowed after a TEST= line
 re_allowed_after_test = re.compile('^Signed-off-by:')
@@ -344,7 +344,8 @@
         start: Commit to start from: 0=HEAD, 1=next one, etc.
         count: Number of commits to list
     """
-    pipe = [['git', 'log', '--reverse', 'HEAD~%d' % start, '-n%d' % count]]
+    pipe = [['git', 'log', '--no-color', '--reverse', 'HEAD~%d' % start,
+	'-n%d' % count]]
     stdout = command.RunPipe(pipe, capture=True)
     series = Series()
     ps = PatchStream(series, is_log=True)