Merge with /home/wd/git/u-boot/custodian/u-boot-mpc85xx
diff --git a/MAKEALL b/MAKEALL
index a535000..0721472 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -133,8 +133,9 @@
#########################################################################
LIST_83xx=" \
- MPC8313ERDB MPC832XEMDS MPC8349EMDS MPC8349ITX \
- MPC8349ITXGP MPC8360EMDS sbc8349 TQM834x \
+ MPC8313ERDB_33 MPC8313ERDB_66 MPC832XEMDS MPC8349EMDS \
+ MPC8349ITX MPC8349ITXGP MPC8360EMDS sbc8349 \
+ TQM834x \
"
diff --git a/Makefile b/Makefile
index 1379318..4fdd485 100644
--- a/Makefile
+++ b/Makefile
@@ -1020,9 +1020,8 @@
@$(MKCONFIG) $(@:_config=) ppc ppc4xx acadia amcc
acadia_nand_config: unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)nand_spl
- @mkdir -p $(obj)board/amcc/acadia
+ @mkdir -p $(obj)include $(obj)board/amcc/acadia
+ @mkdir -p $(obj)nand_spl/board/amcc/acadia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a acadia ppc ppc4xx acadia amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@@ -1050,9 +1049,8 @@
@$(MKCONFIG) $(@:_config=) ppc ppc4xx bamboo amcc
bamboo_nand_config: unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)nand_spl
- @mkdir -p $(obj)board/amcc/bamboo
+ @mkdir -p $(obj)include $(obj)board/amcc/bamboo
+ @mkdir -p $(obj)nand_spl/board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@$(MKCONFIG) -n $@ -a bamboo ppc ppc4xx bamboo amcc
@echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@@ -1233,9 +1231,8 @@
sequoia_nand_config \
rainier_nand_config: unconfig
- @mkdir -p $(obj)include
- @mkdir -p $(obj)nand_spl
- @mkdir -p $(obj)board/amcc/sequoia
+ @mkdir -p $(obj)include $(obj)board/amcc/sequoia
+ @mkdir -p $(obj)nand_spl/board/amcc/sequoia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
@@ -1651,14 +1648,15 @@
MPC8313ERDB_33_config \
MPC8313ERDB_66_config: unconfig
- @echo "" >include/config.h ; \
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo -n "...33M ..." ; \
- echo "#define CFG_33MHZ" >>include/config.h ; \
+ echo "...33M ..." ; \
+ echo "#define CFG_33MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- echo -n "...66M..." ; \
- echo "#define CFG_66MHZ" >>include/config.h ; \
+ echo "...66M..." ; \
+ echo "#define CFG_66MHZ" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8313ERDB ppc mpc83xx mpc8313erdb
@@ -1666,23 +1664,24 @@
MPC832XEMDS_HOST_33_config \
MPC832XEMDS_HOST_66_config \
MPC832XEMDS_SLAVE_config: unconfig
- @echo "" >include/config.h ; \
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
- echo -n "... PCI HOST " ; \
- echo "#define CONFIG_PCI" >>include/config.h ; \
+ echo "... PCI HOST " ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
echo "...PCI SLAVE 66M" ; \
- echo "#define CONFIG_PCI" >>include/config.h ; \
- echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo -n "...33M ..." ; \
- echo "#define PCI_33M" >>include/config.h ; \
+ echo "...33M ..." ; \
+ echo "#define PCI_33M" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- echo -n "...66M..." ; \
- echo "#define PCI_66M" >>include/config.h ; \
+ echo "...66M..." ; \
+ echo "#define PCI_66M" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC832XEMDS ppc mpc83xx mpc832xemds
@@ -1707,23 +1706,24 @@
MPC8360EMDS_HOST_33_config \
MPC8360EMDS_HOST_66_config \
MPC8360EMDS_SLAVE_config: unconfig
- @echo "" >include/config.h ; \
+ @mkdir -p $(obj)include
+ @echo "" >$(obj)include/config.h ; \
if [ "$(findstring _HOST_,$@)" ] ; then \
- echo -n "... PCI HOST " ; \
- echo "#define CONFIG_PCI" >>include/config.h ; \
+ echo "... PCI HOST " ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _SLAVE_,$@)" ] ; then \
echo "...PCI SLAVE 66M" ; \
- echo "#define CONFIG_PCI" >>include/config.h ; \
- echo "#define CONFIG_PCISLAVE" >>include/config.h ; \
+ echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \
+ echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo -n "...33M ..." ; \
- echo "#define PCI_33M" >>include/config.h ; \
+ echo "...33M ..." ; \
+ echo "#define PCI_33M" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _66_,$@)" ] ; then \
- echo -n "...66M..." ; \
- echo "#define PCI_66M" >>include/config.h ; \
+ echo "...66M..." ; \
+ echo "#define PCI_66M" >>$(obj)include/config.h ; \
fi ;
@$(MKCONFIG) -a MPC8360EMDS ppc mpc83xx mpc8360emds
@@ -1749,10 +1749,10 @@
@mkdir -p $(obj)include
@echo "" >$(obj)include/config.h ; \
if [ "$(findstring _33_,$@)" ] ; then \
- echo -n "... 33 MHz PCI" ; \
+ echo "... 33 MHz PCI" ; \
else \
echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
- echo -n "... 66 MHz PCI" ; \
+ echo "... 66 MHz PCI" ; \
fi ; \
if [ "$(findstring _slave_,$@)" ] ; then \
echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
@@ -2013,13 +2013,13 @@
omap1610h2_cs_autoboot_config: unconfig
@mkdir -p $(obj)include
@if [ "$(findstring _cs0boot_, $@)" ] ; then \
- echo "#define CONFIG_CS0_BOOT" >> .$(obj)/include/config.h ; \
+ echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \
echo "... configured for CS0 boot"; \
elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \
- echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)./include/config.h ; \
+ echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \
echo "... configured for CS_AUTO boot"; \
else \
- echo "#define CONFIG_CS3_BOOT" >> $(obj)./include/config.h ; \
+ echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \
echo "... configured for CS3 boot"; \
fi;
@$(MKCONFIG) -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn NULL omap
@@ -2188,11 +2188,12 @@
pdnb3_config \
scpu_config: unconfig
+ @mkdir -p $(obj)include
@if [ "$(findstring scpu_,$@)" ] ; then \
- echo "#define CONFIG_SCPU" >>include/config.h ; \
+ echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \
echo "... on SCPU board variant" ; \
else \
- >include/config.h ; \
+ >$(obj)include/config.h ; \
fi
@$(MKCONFIG) -a pdnb3 arm ixp pdnb3 prodrive
@@ -2414,13 +2415,15 @@
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
ml401_config: unconfig
- @ >include/config.h
- @echo "#define CONFIG_ML401 1" >> include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_ML401 1" >> $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze ml401 xilinx
xupv2p_config: unconfig
- @ >include/config.h
- @echo "#define CONFIG_XUPV2P 1" >> include/config.h
+ @mkdir -p $(obj)include
+ @ >$(obj)include/config.h
+ @echo "#define CONFIG_XUPV2P 1" >> $(obj)include/config.h
@$(MKCONFIG) -a $(@:_config=) microblaze microblaze xupv2p xilinx
#########################################################################
diff --git a/board/esd/cpci750/sdram_init.c b/board/esd/cpci750/sdram_init.c
index c094755..78d1880 100644
--- a/board/esd/cpci750/sdram_init.c
+++ b/board/esd/cpci750/sdram_init.c
@@ -1252,7 +1252,7 @@
/* sets up the GT properly with information passed in */
int setup_sdram (AUX_MEM_DIMM_INFO * info)
{
- ulong tmp, check;
+ ulong tmp;
ulong tmp_sdram_mode = 0; /* 0x141c */
ulong tmp_dunit_control_low = 0; /* 0x1404 */
int i;
diff --git a/board/freescale/common/pixis.c b/board/freescale/common/pixis.c
index af98157..99cc2ee 100644
--- a/board/freescale/common/pixis.c
+++ b/board/freescale/common/pixis.c
@@ -321,10 +321,10 @@
mulconst = 1;
for (i = 0; i < decarr_len; i++)
mulconst *= 10;
- decval = simple_strtoul(decarr, NULL, 10);
+ decval = simple_strtoul((char *)decarr, NULL, 10);
}
- intval = simple_strtoul(intarr, NULL, 10);
+ intval = simple_strtoul((char *)intarr, NULL, 10);
intval = intval * mulconst;
retval = intval + decval;
@@ -362,7 +362,7 @@
val = set_px_sysclk(simple_strtoul(argv[2], NULL, 10));
- corepll = strfractoint(argv[3]);
+ corepll = strfractoint((uchar *)argv[3]);
val = val + set_px_corepll(corepll);
val = val + set_px_mpxpll(simple_strtoul(argv[4], NULL, 10));
if (val == 3) {
@@ -410,7 +410,7 @@
read_from_px_regs(0);
read_from_px_regs_altbank(0);
val = set_px_sysclk(simple_strtoul(argv[3], NULL, 10));
- corepll = strfractoint(argv[4]);
+ corepll = strfractoint((uchar *)argv[4]);
val = val + set_px_corepll(corepll);
val = val + set_px_mpxpll(simple_strtoul(argv[5],
NULL, 10));
diff --git a/board/mpc8641hpcn/mpc8641hpcn.c b/board/mpc8641hpcn/mpc8641hpcn.c
index 7d7e2af..d2182ab 100644
--- a/board/mpc8641hpcn/mpc8641hpcn.c
+++ b/board/mpc8641hpcn/mpc8641hpcn.c
@@ -11,7 +11,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -24,6 +24,7 @@
#include <pci.h>
#include <asm/processor.h>
#include <asm/immap_86xx.h>
+#include <asm/immap_fsl_pci.h>
#include <spd.h>
#include <asm/io.h>
@@ -55,36 +56,6 @@
{
puts("Board: MPC8641HPCN\n");
-#ifdef CONFIG_PCI
-
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- volatile ccsr_pex_t *pex1 = &immap->im_pex1;
-
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
- uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
- uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
-
- if ((io_sel == 2 || io_sel == 3 || io_sel == 5
- || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
- && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
- debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
- debug("0x%08x=0x%08x ", &pex1->pme_msg_det, pex1->pme_msg_det);
- if (pex1->pme_msg_det) {
- pex1->pme_msg_det = 0xffffffff;
- debug(" with errors. Clearing. Now 0x%08x",
- pex1->pme_msg_det);
- }
- debug("\n");
- } else {
- puts("PCI-EXPRESS 1: Disabled\n");
- }
-
-#else
- puts("PCI-EXPRESS1: Disabled\n");
-#endif
-
return 0;
}
@@ -219,21 +190,138 @@
#endif
-static struct pci_controller hose = {
+static struct pci_controller pci1_hose = {
#ifndef CONFIG_PCI_PNP
- config_table:pci_mpc86xxcts_config_table,
+ config_table:pci_mpc86xxcts_config_table
#endif
};
-
#endif /* CONFIG_PCI */
+#ifdef CONFIG_PCI2
+static struct pci_controller pci2_hose;
+#endif /* CONFIG_PCI2 */
+
+int first_free_busno = 0;
+
+
void pci_init_board(void)
{
-#ifdef CONFIG_PCI
- extern void pci_mpc86xx_init(struct pci_controller *hose);
+ volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
+ volatile ccsr_gur_t *gur = &immap->im_gur;
+ uint devdisr = gur->devdisr;
+ uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
- pci_mpc86xx_init(&hose);
-#endif /* CONFIG_PCI */
+#ifdef CONFIG_PCI1
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci1_hose;
+#ifdef DEBUG
+ uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
+ uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
+#endif
+ if ((io_sel == 2 || io_sel == 3 || io_sel == 5
+ || io_sel == 6 || io_sel == 7 || io_sel == 0xF)
+ && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
+ debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
+ debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det);
+ if (pci->pme_msg_det) {
+ pci->pme_msg_det = 0xffffffff;
+ debug(" with errors. Clearing. Now 0x%08x",
+ pci->pme_msg_det);
+ }
+ debug("\n");
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI1_MEM_BASE,
+ CFG_PCI1_MEM_PHYS,
+ CFG_PCI1_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI1_IO_BASE,
+ CFG_PCI1_IO_PHYS,
+ CFG_PCI1_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno=hose->last_busno+1;
+ printf (" PCI-EXPRESS 1 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+
+ /*
+ * Activate ULI1575 legacy chip by performing a fake
+ * memory access. Needed to make ULI RTC work.
+ */
+ in_be32((unsigned *) CFG_PCI1_MEM_BASE
+ + CFG_PCI1_MEM_SIZE - 0x1000000);
+
+ } else {
+ puts("PCI-EXPRESS 1: Disabled\n");
+ }
+}
+#else
+ puts("PCI-EXPRESS1: Disabled\n");
+#endif /* CONFIG_PCI1 */
+
+#ifdef CONFIG_PCI2
+{
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI2_ADDR;
+ extern void fsl_pci_init(struct pci_controller *hose);
+ struct pci_controller *hose = &pci2_hose;
+
+
+ /* inbound */
+ pci_set_region(hose->regions + 0,
+ CFG_PCI_MEMORY_BUS,
+ CFG_PCI_MEMORY_PHYS,
+ CFG_PCI_MEMORY_SIZE,
+ PCI_REGION_MEM | PCI_REGION_MEMORY);
+
+ /* outbound memory */
+ pci_set_region(hose->regions + 1,
+ CFG_PCI2_MEM_BASE,
+ CFG_PCI2_MEM_PHYS,
+ CFG_PCI2_MEM_SIZE,
+ PCI_REGION_MEM);
+
+ /* outbound io */
+ pci_set_region(hose->regions + 2,
+ CFG_PCI2_IO_BASE,
+ CFG_PCI2_IO_PHYS,
+ CFG_PCI2_IO_SIZE,
+ PCI_REGION_IO);
+
+ hose->region_count = 3;
+
+ hose->first_busno=first_free_busno;
+ pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
+
+ fsl_pci_init(hose);
+
+ first_free_busno=hose->last_busno+1;
+ printf (" PCI-EXPRESS 2 on bus %02x - %02x\n",
+ hose->first_busno,hose->last_busno);
+}
+#else
+ puts("PCI-EXPRESS 2: Disabled\n");
+#endif /* CONFIG_PCI2 */
+
}
#if defined(CONFIG_OF_FLAT_TREE) && defined(CONFIG_OF_BOARD_SETUP)
diff --git a/board/mpc8641hpcn/sys_eeprom.c b/board/mpc8641hpcn/sys_eeprom.c
index 74e2a3d..7bc663b 100644
--- a/board/mpc8641hpcn/sys_eeprom.c
+++ b/board/mpc8641hpcn/sys_eeprom.c
@@ -68,7 +68,7 @@
mac_data.date[5],
mac_data.date[6]);
for (i = 0; i < 8; i++) {
- sprintf(ethaddr[i],
+ sprintf((char *)ethaddr[i],
"%02x:%02x:%02x:%02x:%02x:%02x",
mac_data.mac[i][0],
mac_data.mac[i][1],
@@ -79,10 +79,10 @@
printf("MAC %d %s\n", i, ethaddr[i]);
}
- setenv("ethaddr", ethaddr[0]);
- setenv("eth1addr", ethaddr[1]);
- setenv("eth2addr", ethaddr[2]);
- setenv("eth3addr", ethaddr[3]);
+ setenv("ethaddr", (char *)ethaddr[0]);
+ setenv("eth1addr", (char *)ethaddr[1]);
+ setenv("eth2addr", (char *)ethaddr[2]);
+ setenv("eth3addr", (char *)ethaddr[3]);
return 0;
}
@@ -236,7 +236,7 @@
} else {
for (i = 0; i < 4; i++) {
if (memcmp(&mac_data.mac[i], "\0\0\0\0\0\0", 6)) {
- sprintf(ethaddr[i],
+ sprintf((char *)ethaddr[i],
"%02x:%02x:%02x:%02x:%02x:%02x",
mac_data.mac[i][0],
mac_data.mac[i][1],
@@ -244,10 +244,10 @@
mac_data.mac[i][3],
mac_data.mac[i][4],
mac_data.mac[i][5]);
- sprintf(enetvar,
+ sprintf((char *)enetvar,
i ? "eth%daddr" : "ethaddr",
i);
- setenv(enetvar, ethaddr[i]);
+ setenv((char *)enetvar, (char *)ethaddr[i]);
}
}
}
diff --git a/board/mpc8641hpcn/u-boot.lds b/board/mpc8641hpcn/u-boot.lds
index 34b50e4..e4792ef 100644
--- a/board/mpc8641hpcn/u-boot.lds
+++ b/board/mpc8641hpcn/u-boot.lds
@@ -57,7 +57,6 @@
cpu/mpc86xx/cpu_init.o (.text)
cpu/mpc86xx/cpu.o (.text)
cpu/mpc86xx/speed.o (.text)
- cpu/mpc86xx/pci.o (.text)
common/dlmalloc.o (.text)
lib_generic/crc32.o (.text)
lib_ppc/extable.o (.text)
diff --git a/board/spc1920/hpi.c b/board/spc1920/hpi.c
index 3c36f79..cd7799b 100644
--- a/board/spc1920/hpi.c
+++ b/board/spc1920/hpi.c
@@ -122,7 +122,9 @@
#define TINY_AUTOINC_BASE_ADDR 0x0
static int hpi_activate(void);
+#if 0
static void hpi_inactivate(void);
+#endif
static void dsp_reset(void);
static int hpi_write_inc(u32 addr, u32 *data, u32 count);
@@ -133,7 +135,9 @@
int hpi_test(void);
static int hpi_write_addr_test(u32 addr);
static int hpi_read_write_test(u32 addr, u32 data);
+#ifdef DO_TINY_TEST
static int hpi_tiny_autoinc_test(void);
+#endif /* DO_TINY_TEST */
#endif /* CONFIG_SPC1920_HPI_TEST */
@@ -185,6 +189,7 @@
return 0;
}
+#if 0
/* turn off the host port interface */
static void hpi_inactivate(void)
{
@@ -200,6 +205,7 @@
/* currently always on TBD */
}
+#endif
/* reset the DSP */
static void dsp_reset(void)
@@ -570,6 +576,7 @@
return 0;
}
+#ifdef DO_TINY_TEST
static int hpi_tiny_autoinc_test(void)
{
int i;
@@ -599,5 +606,6 @@
}
return 0;
}
+#endif /* DO_TINY_TEST */
#endif /* CONFIG_SPC1920_HPI_TEST */
diff --git a/board/trab/Makefile b/board/trab/Makefile
index 868ca42..fbe1c36 100644
--- a/board/trab/Makefile
+++ b/board/trab/Makefile
@@ -50,7 +50,6 @@
$(obj)trab_fkt.srec: $(OBJS_FKT) $(LIB)
$(LD) -g -Ttext $(LOAD_ADDR) -o $(<:.o=) -e trab_fkt $^ $(LIB) \
-L$(obj)../../examples -lstubs \
- -L$(obj)../../lib_generic -lgeneric \
-L$(gcclibdir) -lgcc
$(OBJCOPY) -O srec $(<:.o=) $@
diff --git a/common/exports.c b/common/exports.c
index a579554..ec4656b 100644
--- a/common/exports.c
+++ b/common/exports.c
@@ -28,6 +28,8 @@
gd->jt[XF_get_timer] = (void *) get_timer;
gd->jt[XF_simple_strtoul] = (void *) simple_strtoul;
gd->jt[XF_udelay] = (void *) udelay;
+ gd->jt[XF_simple_strtol] = (void *) simple_strtol;
+ gd->jt[XF_strcmp] = (void *) strcmp;
#if defined(CONFIG_I386) || defined(CONFIG_PPC)
gd->jt[XF_install_hdlr] = (void *) irq_install_handler;
gd->jt[XF_free_hdlr] = (void *) irq_free_handler;
diff --git a/cpu/mpc86xx/Makefile b/cpu/mpc86xx/Makefile
index fffcfd2..6d9300e 100644
--- a/cpu/mpc86xx/Makefile
+++ b/cpu/mpc86xx/Makefile
@@ -1,4 +1,5 @@
#
+# Copyright 2007 Freescale Semiconductor, Inc.
# (C) Copyright 2002,2003 Motorola Inc.
# Xianghua Xiao,X.Xiao@motorola.com
#
@@ -30,7 +31,7 @@
START = start.o #resetvec.o
SOBJS = cache.o
COBJS = traps.o cpu.o cpu_init.o speed.o interrupts.o \
- pci.o pcie_indirect.o spd_sdram.o
+ spd_sdram.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mpc86xx/interrupts.c b/cpu/mpc86xx/interrupts.c
index 49820bb..08e0675 100644
--- a/cpu/mpc86xx/interrupts.c
+++ b/cpu/mpc86xx/interrupts.c
@@ -71,7 +71,7 @@
}
/* interrupt is not supported yet */
-int interrupt_init_cpu(unsigned *decrementer_count)
+int interrupt_init_cpu(unsigned long *decrementer_count)
{
return 0;
}
@@ -107,7 +107,7 @@
return ret;
decrementer_count = get_tbclk() / CFG_HZ;
- debug("interrupt init: tbclk() = %d MHz, decrementer_count = %d\n",
+ debug("interrupt init: tbclk() = %d MHz, decrementer_count = %ld\n",
(get_tbclk() / 1000000),
decrementer_count);
@@ -158,7 +158,7 @@
timestamp++;
- ppcDcbf(×tamp);
+ ppcDcbf((unsigned long)×tamp);
/* Restore Decrementer Count */
set_dec(decrementer_count);
diff --git a/cpu/mpc86xx/pci.c b/cpu/mpc86xx/pci.c
deleted file mode 100644
index b86548d..0000000
--- a/cpu/mpc86xx/pci.c
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * Copyright (C) Freescale Semiconductor,Inc.
- * 2005, 2006. All rights reserved.
- *
- * Ed Swarthout (ed.swarthout@freescale.com)
- * Jason Jin (Jason.jin@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * PCIE Configuration space access support for PCIE Bridge
- */
-#include <common.h>
-#include <pci.h>
-
-#if defined(CONFIG_PCI)
-void
-pci_mpc86xx_init(struct pci_controller *hose)
-{
- volatile immap_t *immap = (immap_t *) CFG_CCSRBAR;
- volatile ccsr_pex_t *pcie1 = &immap->im_pex1;
- u16 temp16;
- u32 temp32;
-
- volatile ccsr_gur_t *gur = &immap->im_gur;
- uint host1_agent = (gur->porbmsr & MPC86xx_PORBMSR_HA) >> 17;
- uint pcie1_host = (host1_agent == 2) || (host1_agent == 3);
- uint pcie1_agent = (host1_agent == 0) || (host1_agent == 1);
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC86xx_PORDEVSR_IO_SEL) >> 16;
-
- if ((io_sel == 2 || io_sel == 3 || io_sel == 5 || io_sel == 6 ||
- io_sel == 7 || io_sel == 0xf)
- && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
- printf("PCI-EXPRESS 1: Configured as %s \n",
- pcie1_agent ? "Agent" : "Host");
- if (pcie1_agent)
- return; /*Don't scan bus when configured as agent */
- printf(" Scanning PCIE bus");
- debug("0x%08x=0x%08x ",
- &pcie1->pme_msg_det,
- pcie1->pme_msg_det);
- if (pcie1->pme_msg_det) {
- pcie1->pme_msg_det = 0xffffffff;
- debug(" with errors. Clearing. Now 0x%08x",
- pcie1->pme_msg_det);
- }
- debug("\n");
- } else {
- printf("PCI-EXPRESS 1 disabled!\n");
- return;
- }
-
- /*
- * Set first_bus=0 only skipped B0:D0:F0 which is
- * a reserved device in M1575, but make it easy for
- * most of the scan process.
- */
- hose->first_busno = 0x00;
- hose->last_busno = 0xfe;
-
- pcie_setup_indirect(hose, (CFG_IMMR + 0x8000), (CFG_IMMR + 0x8004));
-
- pci_hose_read_config_word(hose,
- PCI_BDF(0, 0, 0), PCI_COMMAND, &temp16);
- temp16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
- PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
- pci_hose_write_config_word(hose,
- PCI_BDF(0, 0, 0), PCI_COMMAND, temp16);
-
- pci_hose_write_config_word(hose, PCI_BDF(0, 0, 0), PCI_STATUS, 0xffff);
- pci_hose_write_config_byte(hose,
- PCI_BDF(0, 0, 0), PCI_LATENCY_TIMER, 0x80);
-
- pci_hose_read_config_dword(hose, PCI_BDF(0, 0, 0), PCI_PRIMARY_BUS,
- &temp32);
- temp32 = (temp32 & 0xff000000) | (0xff) | (0x0 << 8) | (0xfe << 16);
- pci_hose_write_config_dword(hose, PCI_BDF(0, 0, 0), PCI_PRIMARY_BUS,
- temp32);
-
- pcie1->powar1 = 0;
- pcie1->powar2 = 0;
- pcie1->piwar1 = 0;
- pcie1->piwar1 = 0;
-
- pcie1->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
- pcie1->powar1 = 0x8004401c; /* 512M MEM space */
- pcie1->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
- pcie1->potear1 = 0x00000000;
-
- pcie1->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
- pcie1->powar2 = 0x80088017; /* 16M IO space */
- pcie1->potar2 = 0x00000000;
- pcie1->potear2 = 0x00000000;
-
- pcie1->pitar1 = 0x00000000;
- pcie1->piwbar1 = 0x00000000;
- /* Enable, Prefetch, Local Mem, * Snoop R/W, 2G */
- pcie1->piwar1 = 0xa0f5501e;
-
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
-
- pci_set_region(hose->regions + 1,
- CFG_PCI1_MEM_BASE,
- CFG_PCI1_MEM_PHYS,
- CFG_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- pci_set_region(hose->regions + 2,
- CFG_PCI1_IO_BASE,
- CFG_PCI1_IO_PHYS,
- CFG_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 3;
-
- pci_register_hose(hose);
-
- hose->last_busno = pci_hose_scan(hose);
- debug("pcie_mpc86xx_init: last_busno %x\n", hose->last_busno);
- debug("pcie_mpc86xx init: current_busno %x\n ", hose->current_busno);
-
- printf("....PCIE1 scan & enumeration done\n");
-}
-#endif /* CONFIG_PCI */
diff --git a/cpu/mpc86xx/pcie_indirect.c b/cpu/mpc86xx/pcie_indirect.c
deleted file mode 100644
index b00ad76..0000000
--- a/cpu/mpc86xx/pcie_indirect.c
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * Support for indirect PCI bridges.
- *
- * Copyright (c) Freescale Semiconductor, Inc.
- * 2006. All rights reserved.
- *
- * Jason Jin <Jason.jin@freescale.com>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * partly derived from
- * arch/powerpc/platforms/86xx/mpc86xx_pcie.c
- */
-
-#include <common.h>
-
-#ifdef CONFIG_PCI
-
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <pci.h>
-
-#define PCI_CFG_OUT out_be32
-#define PEX_FIX out_be32(hose->cfg_addr+0x4, 0x0400ffff)
-
-static int
-indirect_read_config_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- int len,
- u32 *val)
-{
- int bus = PCI_BUS(dev);
-
- volatile unsigned char *cfg_data;
- u32 temp;
-
- PEX_FIX;
- if (bus == 0xff) {
- PCI_CFG_OUT(hose->cfg_addr,
- dev | (offset & 0xfc) | 0x80000001);
- } else {
- PCI_CFG_OUT(hose->cfg_addr,
- dev | (offset & 0xfc) | 0x80000000);
- }
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
- cfg_data = hose->cfg_data;
- PEX_FIX;
- temp = in_le32((u32 *) cfg_data);
- switch (len) {
- case 1:
- *val = (temp >> (((offset & 3)) * 8)) & 0xff;
- break;
- case 2:
- *val = (temp >> (((offset & 3)) * 8)) & 0xffff;
- break;
- default:
- *val = temp;
- break;
- }
-
- return 0;
-}
-
-static int
-indirect_write_config_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- int len,
- u32 val)
-{
- int bus = PCI_BUS(dev);
- volatile unsigned char *cfg_data;
- u32 temp;
-
- PEX_FIX;
- if (bus == 0xff) {
- PCI_CFG_OUT(hose->cfg_addr,
- dev | (offset & 0xfc) | 0x80000001);
- } else {
- PCI_CFG_OUT(hose->cfg_addr,
- dev | (offset & 0xfc) | 0x80000000);
- }
-
- /*
- * Note: the caller has already checked that offset is
- * suitably aligned and that len is 1, 2 or 4.
- */
- /* ERRATA PCI-Ex 12 - Configuration Address/Data Alignment */
- cfg_data = hose->cfg_data;
- switch (len) {
- case 1:
- PEX_FIX;
- temp = in_le32((u32 *) cfg_data);
- temp = (temp & ~(0xff << ((offset & 3) * 8))) |
- (val << ((offset & 3) * 8));
- PEX_FIX;
- out_le32((u32 *) cfg_data, temp);
- break;
- case 2:
- PEX_FIX;
- temp = in_le32((u32 *) cfg_data);
- temp = (temp & ~(0xffff << ((offset & 3) * 8)));
- temp |= (val << ((offset & 3) * 8));
- PEX_FIX;
- out_le32((u32 *) cfg_data, temp);
- break;
- default:
- PEX_FIX;
- out_le32((u32 *) cfg_data, val);
- break;
- }
- PEX_FIX;
- return 0;
-}
-
-static int
-indirect_read_config_byte_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- u8 *val)
-{
- u32 val32;
- indirect_read_config_pcie(hose, dev, offset, 1, &val32);
- *val = (u8) val32;
- return 0;
-}
-
-static int
-indirect_read_config_word_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- u16 *val)
-{
- u32 val32;
- indirect_read_config_pcie(hose, dev, offset, 2, &val32);
- *val = (u16) val32;
- return 0;
-}
-
-static int
-indirect_read_config_dword_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- u32 *val)
-{
- return indirect_read_config_pcie(hose, dev, offset, 4, val);
-}
-
-static int
-indirect_write_config_byte_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- u8 val)
-{
- return indirect_write_config_pcie(hose, dev, offset, 1, (u32) val);
-}
-
-static int
-indirect_write_config_word_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- unsigned short val)
-{
- return indirect_write_config_pcie(hose, dev, offset, 2, (u32) val);
-}
-
-static int
-indirect_write_config_dword_pcie(struct pci_controller *hose,
- pci_dev_t dev,
- int offset,
- u32 val)
-{
- return indirect_write_config_pcie(hose, dev, offset, 4, val);
-}
-
-void
-pcie_setup_indirect(struct pci_controller *hose, u32 cfg_addr, u32 cfg_data)
-{
- pci_set_ops(hose,
- indirect_read_config_byte_pcie,
- indirect_read_config_word_pcie,
- indirect_read_config_dword_pcie,
- indirect_write_config_byte_pcie,
- indirect_write_config_word_pcie,
- indirect_write_config_dword_pcie);
-
- hose->cfg_addr = (unsigned int *)cfg_addr;
- hose->cfg_data = (unsigned char *)cfg_data;
-}
-
-#endif /* CONFIG_PCI */
diff --git a/drivers/Makefile b/drivers/Makefile
index 48fd4ea..fa2e86f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -52,7 +52,7 @@
ks8695eth.o \
pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
rpx_pcmcia.o \
- fsl_i2c.o
+ fsl_i2c.o fsl_pci_init.o
SRCS := $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(COBJS))
diff --git a/drivers/ahci.c b/drivers/ahci.c
index 8ceff00..ccd4d71 100644
--- a/drivers/ahci.c
+++ b/drivers/ahci.c
@@ -253,7 +253,8 @@
static int ahci_init_one(pci_dev_t pdev)
{
- u32 iobase, vendor;
+ u32 iobase;
+ u16 vendor;
int rc;
memset((void *)ataid, 0, sizeof(hd_driveid_t *) * AHCI_MAX_PORTS);
diff --git a/drivers/fsl_pci_init.c b/drivers/fsl_pci_init.c
new file mode 100644
index 0000000..1d1f6df
--- /dev/null
+++ b/drivers/fsl_pci_init.c
@@ -0,0 +1,180 @@
+/*
+ * Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * Version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+#define DEBUG
+#include <common.h>
+
+#ifdef CONFIG_FSL_PCI_INIT
+
+/*
+ * PCI/PCIE Controller initialization for mpc85xx/mpc86xx soc's
+ *
+ * Initialize controller and call the common driver/pci pci_hose_scan to
+ * scan for bridges and devices.
+ *
+ * Hose fields which need to be pre-initialized by board specific code:
+ * regions[]
+ * first_busno
+ *
+ * Fields updated:
+ * last_busno
+ */
+
+#include <pci.h>
+#include <asm/immap_fsl_pci.h>
+
+void pciauto_prescan_setup_bridge(struct pci_controller *hose,
+ pci_dev_t dev, int sub_bus);
+void pciauto_postscan_setup_bridge(struct pci_controller *hose,
+ pci_dev_t dev, int sub_bus);
+
+void pciauto_config_init(struct pci_controller *hose);
+void
+fsl_pci_init(struct pci_controller *hose)
+{
+ u16 temp16;
+ u32 temp32;
+ int busno = hose->first_busno;
+ int enabled;
+ u16 ltssm;
+ u8 temp8;
+ int r;
+ int bridge;
+ volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) hose->cfg_addr;
+ pci_dev_t dev = PCI_BDF(busno,0,0);
+
+ /* Initialize ATMU registers based on hose regions and flags */
+ volatile pot_t *po=&pci->pot[1]; /* skip 0 */
+ volatile pit_t *pi=&pci->pit[0]; /* ranges from: 3 to 1 */
+
+#ifdef DEBUG
+ int neg_link_w;
+#endif
+
+ for (r=0; r<hose->region_count; r++) {
+ if (hose->regions[r].flags & PCI_REGION_MEMORY) { /* inbound */
+ pi->pitar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
+ pi->piwbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
+ pi->piwbear = 0;
+ pi->piwar = PIWAR_EN | PIWAR_PF | PIWAR_LOCAL |
+ PIWAR_READ_SNOOP | PIWAR_WRITE_SNOOP |
+ (__ilog2(hose->regions[r].size) - 1);
+ pi++;
+ } else { /* Outbound */
+ po->powbar = (hose->regions[r].phys_start >> 12) & 0x000fffff;
+ po->potar = (hose->regions[r].bus_start >> 12) & 0x000fffff;
+ po->potear = 0;
+ if (hose->regions[r].flags & PCI_REGION_IO)
+ po->powar = POWAR_EN | POWAR_IO_READ | POWAR_IO_WRITE |
+ (__ilog2(hose->regions[r].size) - 1);
+ else
+ po->powar = POWAR_EN | POWAR_MEM_READ | POWAR_MEM_WRITE |
+ (__ilog2(hose->regions[r].size) - 1);
+ po++;
+ }
+ }
+
+ pci_register_hose(hose);
+ pciauto_config_init(hose); /* grab pci_{mem,prefetch,io} */
+ hose->current_busno = hose->first_busno;
+
+ pci->pedr = 0xffffffff; /* Clear any errors */
+ pci->peer = 0xffffffff; /* Enable Error Interupts */
+ pci_hose_read_config_dword (hose, dev, PCI_DCR, &temp32);
+ temp32 |= 0xf000e; /* set URR, FER, NFER (but not CER) */
+ pci_hose_write_config_dword(hose, dev, PCI_DCR, temp32);
+
+ pci_hose_read_config_byte (hose, dev, PCI_HEADER_TYPE, &temp8);
+ bridge = temp8 & PCI_HEADER_TYPE_BRIDGE; /* Bridge, such as pcie */
+
+ if ( bridge ) {
+
+ pci_hose_read_config_word(hose, dev, PCI_LTSSM, <ssm);
+ enabled = ltssm >= PCI_LTSSM_L0;
+
+ if (!enabled) {
+ debug("....PCIE link error. Skipping scan."
+ "LTSSM=0x%02x\n", temp16);
+ hose->last_busno = hose->first_busno;
+ return;
+ }
+
+ pci->pme_msg_det = 0xffffffff;
+ pci->pme_msg_int_en = 0xffffffff;
+#ifdef DEBUG
+ pci_hose_read_config_word(hose, dev, PCI_LSR, &temp16);
+ neg_link_w = (temp16 & 0x3f0 ) >> 4;
+ debug("...PCIE LTSSM=0x%x, Negotiated link width=%d\n",
+ ltssm, neg_link_w);
+#endif
+ hose->current_busno++; /* Start scan with secondary */
+ pciauto_prescan_setup_bridge(hose, dev, hose->current_busno);
+
+ } else {
+#if 0
+/* done in pci_hose_config_device() */
+ pci_hose_read_config_word(hose, dev, PCI_COMMAND, &temp16);
+ temp16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER |
+ PCI_COMMAND_MEMORY | PCI_COMMAND_IO;
+ pci_hose_write_config_word(hose, dev, PCI_COMMAND, temp16);
+ pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff);
+ pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80);
+#endif
+ }
+
+ /* Call setup to allocate PCSRBAR window */
+ pciauto_setup_device(hose, dev, 1, hose->pci_mem,
+ hose->pci_prefetch, hose->pci_io);
+
+ printf (" Scanning PCI bus %02x\n", hose->current_busno);
+ hose->last_busno = pci_hose_scan_bus(hose,hose->current_busno);
+
+ if ( bridge ) { /* update limit regs and subordinate busno */
+ pciauto_postscan_setup_bridge(hose, dev, hose->last_busno);
+ }
+
+ /* Clear all error indications */
+
+ if (pci->pme_msg_det && pci->pme_msg_det != 0xffffffff) {
+ debug("pci_fsl_init: pme_msg_det@%x=%x. Clearing\n",
+ &pci->pme_msg_det, pci->pme_msg_det);
+ pci->pme_msg_det = 0xffffffff;
+ }
+
+ if (pci->pedr) {
+ debug("pci_fsl_init: pedr@%x=%x. Clearing\n",
+ &pci->pedr, pci->pedr);
+ pci->pedr = 0xffffffff;
+ }
+
+ pci_hose_read_config_word (hose, dev, PCI_DSR, &temp16);
+ if (temp16) {
+ debug("pci_fsl_init: PCI_DSR@%x=%x. Clearing\n",
+ PCI_DSR, temp16);
+ pci_hose_write_config_word(hose, dev,
+ PCI_DSR, 0xffff);
+ }
+
+ pci_hose_read_config_word (hose, dev, PCI_SEC_STATUS, &temp16);
+ if (temp16) {
+ debug("pci_fsl_init: PCI_SEC_STATUS@%x=%x. Clearing\n",
+ PCI_SEC_STATUS, temp16);
+ pci_hose_write_config_word(hose, dev, PCI_SEC_STATUS, 0xffff);
+ }
+}
+
+#endif /* CONFIG_FSL_PCI */
diff --git a/include/_exports.h b/include/_exports.h
index a0fbf2a..da6e088 100644
--- a/include/_exports.h
+++ b/include/_exports.h
@@ -15,6 +15,8 @@
EXPORT_FUNC(getenv)
EXPORT_FUNC(setenv)
EXPORT_FUNC(simple_strtoul)
+EXPORT_FUNC(simple_strtol)
+EXPORT_FUNC(strcmp)
#if defined(CONFIG_CMD_I2C)
EXPORT_FUNC(i2c_write)
EXPORT_FUNC(i2c_read)
diff --git a/include/asm-ppc/immap_fsl_pci.h b/include/asm-ppc/immap_fsl_pci.h
new file mode 100644
index 0000000..bd732b6
--- /dev/null
+++ b/include/asm-ppc/immap_fsl_pci.h
@@ -0,0 +1,150 @@
+/* (C) Copyright 2007 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#ifndef __IMMAP_85xx_fsl_pci__
+#define __IMMAP_85xx_fsl_pci__
+
+/*
+ * Common PCI/PCIE Register structure for mpc85xx and mpc86xx
+ */
+
+/*
+ * PCI Translation Registers
+ */
+typedef struct pci_outbound_window {
+ u32 potar; /* 0x00 - Address */
+ u32 potear; /* 0x04 - Address Extended */
+ u32 powbar; /* 0x08 - Window Base Address */
+ u32 res1;
+ u32 powar; /* 0x10 - Window Attributes */
+#define POWAR_EN 0x80000000
+#define POWAR_IO_READ 0x00080000
+#define POWAR_MEM_READ 0x00040000
+#define POWAR_IO_WRITE 0x00008000
+#define POWAR_MEM_WRITE 0x00004000
+ u32 res2[3];
+} pot_t;
+
+typedef struct pci_inbound_window {
+ u32 pitar; /* 0x00 - Address */
+ u32 res1;
+ u32 piwbar; /* 0x08 - Window Base Address */
+ u32 piwbear; /* 0x0c - Window Base Address Extended */
+ u32 piwar; /* 0x10 - Window Attributes */
+#define PIWAR_EN 0x80000000
+#define PIWAR_PF 0x20000000
+#define PIWAR_LOCAL 0x00f00000
+#define PIWAR_READ_SNOOP 0x00050000
+#define PIWAR_WRITE_SNOOP 0x00005000
+ u32 res2[3];
+} pit_t;
+
+/* PCI/PCI Express Registers */
+typedef struct ccsr_pci {
+ u32 cfg_addr; /* 0x000 - PCI Configuration Address Register */
+ u32 cfg_data; /* 0x004 - PCI Configuration Data Register */
+ u32 int_ack; /* 0x008 - PCI Interrupt Acknowledge Register */
+ u32 out_comp_to; /* 0x00C - PCI Outbound Completion Timeout Register */
+ u32 out_conf_to; /* 0x010 - PCI Configuration Timeout Register */
+ u32 config; /* 0x014 - PCIE CONFIG Register */
+ char res2[8];
+ u32 pme_msg_det; /* 0x020 - PCIE PME & message detect register */
+ u32 pme_msg_dis; /* 0x024 - PCIE PME & message disable register */
+ u32 pme_msg_int_en; /* 0x028 - PCIE PME & message interrupt enable register */
+ u32 pm_command; /* 0x02c - PCIE PM Command register */
+ char res4[3016]; /* (- #xbf8 #x30)3016 */
+ u32 block_rev1; /* 0xbf8 - PCIE Block Revision register 1 */
+ u32 block_rev2; /* 0xbfc - PCIE Block Revision register 2 */
+
+ pot_t pot[5]; /* 0xc00 - 0xc9f Outbound ATMU's 0, 1, 2, 3, and 4 */
+ u32 res5[64];
+ pit_t pit[3]; /* 0xda0 - 0xdff Inbound ATMU's 3, 2, and 1 */
+#define PIT3 0
+#define PIT2 1
+#define PIT1 2
+
+#if 0
+ u32 potar0; /* 0xc00 - PCI Outbound Transaction Address Register 0 */
+ u32 potear0; /* 0xc04 - PCI Outbound Translation Extended Address Register 0 */
+ char res5[8];
+ u32 powar0; /* 0xc10 - PCI Outbound Window Attributes Register 0 */
+ char res6[12];
+ u32 potar1; /* 0xc20 - PCI Outbound Transaction Address Register 1 */
+ u32 potear1; /* 0xc24 - PCI Outbound Translation Extended Address Register 1 */
+ u32 powbar1; /* 0xc28 - PCI Outbound Window Base Address Register 1 */
+ char res7[4];
+ u32 powar1; /* 0xc30 - PCI Outbound Window Attributes Register 1 */
+ char res8[12];
+ u32 potar2; /* 0xc40 - PCI Outbound Transaction Address Register 2 */
+ u32 potear2; /* 0xc44 - PCI Outbound Translation Extended Address Register 2 */
+ u32 powbar2; /* 0xc48 - PCI Outbound Window Base Address Register 2 */
+ char res9[4];
+ u32 powar2; /* 0xc50 - PCI Outbound Window Attributes Register 2 */
+ char res10[12];
+ u32 potar3; /* 0xc60 - PCI Outbound Transaction Address Register 3 */
+ u32 potear3; /* 0xc64 - PCI Outbound Translation Extended Address Register 3 */
+ u32 powbar3; /* 0xc68 - PCI Outbound Window Base Address Register 3 */
+ char res11[4];
+ u32 powar3; /* 0xc70 - PCI Outbound Window Attributes Register 3 */
+ char res12[12];
+ u32 potar4; /* 0xc80 - PCI Outbound Transaction Address Register 4 */
+ u32 potear4; /* 0xc84 - PCI Outbound Translation Extended Address Register 4 */
+ u32 powbar4; /* 0xc88 - PCI Outbound Window Base Address Register 4 */
+ char res13[4];
+ u32 powar4; /* 0xc90 - PCI Outbound Window Attributes Register 4 */
+ char res14[268];
+ u32 pitar3; /* 0xda0 - PCI Inbound Translation Address Register 3 */
+ char res15[4];
+ u32 piwbar3; /* 0xda8 - PCI Inbound Window Base Address Register 3 */
+ u32 piwbear3; /* 0xdac - PCI Inbound Window Base Extended Address Register 3 */
+ u32 piwar3; /* 0xdb0 - PCI Inbound Window Attributes Register 3 */
+ char res16[12];
+ u32 pitar2; /* 0xdc0 - PCI Inbound Translation Address Register 2 */
+ char res17[4];
+ u32 piwbar2; /* 0xdc8 - PCI Inbound Window Base Address Register 2 */
+ u32 piwbear2; /* 0xdcc - PCI Inbound Window Base Extended Address Register 2 */
+ u32 piwar2; /* 0xdd0 - PCI Inbound Window Attributes Register 2 */
+ char res18[12];
+ u32 pitar1; /* 0xde0 - PCI Inbound Translation Address Register 1 */
+ char res19[4];
+ u32 piwbar1; /* 0xde8 - PCI Inbound Window Base Address Register 1 */
+ char res20[4];
+ u32 piwar1; /* 0xdf0 - PCI Inbound Window Attributes Register 1 */
+ char res21[12];
+#endif
+ u32 pedr; /* 0xe00 - PCI Error Detect Register */
+ u32 pecdr; /* 0xe04 - PCI Error Capture Disable Register */
+ u32 peer; /* 0xe08 - PCI Error Interrupt Enable Register */
+ u32 peattrcr; /* 0xe0c - PCI Error Attributes Capture Register */
+ u32 peaddrcr; /* 0xe10 - PCI Error Address Capture Register */
+/* u32 perr_disr * 0xe10 - PCIE Erorr Disable Register */
+ u32 peextaddrcr; /* 0xe14 - PCI Error Extended Address Capture Register */
+ u32 pedlcr; /* 0xe18 - PCI Error Data Low Capture Register */
+ u32 pedhcr; /* 0xe1c - PCI Error Error Data High Capture Register */
+ u32 gas_timr; /* 0xe20 - PCI Gasket Timer Register */
+/* u32 perr_cap_stat; * 0xe20 - PCIE Error Capture Status Register */
+ char res22[4];
+ u32 perr_cap0; /* 0xe28 - PCIE Error Capture Register 0 */
+ u32 perr_cap1; /* 0xe2c - PCIE Error Capture Register 1 */
+ u32 perr_cap2; /* 0xe30 - PCIE Error Capture Register 2 */
+ u32 perr_cap3; /* 0xe34 - PCIE Error Capture Register 3 */
+ char res23[456]; /* (- #x1000 #xe38) 456 */
+} ccsr_fsl_pci_t;
+
+#endif /*__IMMAP_fsl_pci__*/
diff --git a/include/configs/GEN860T.h b/include/configs/GEN860T.h
index d88124a..bfbf3a8 100644
--- a/include/configs/GEN860T.h
+++ b/include/configs/GEN860T.h
@@ -248,7 +248,7 @@
#endif
#ifdef CONFIG_POST
-u #define CONFIG_CMD_DIAG
+#define CONFIG_CMD_DIAG
#endif
/*
diff --git a/include/configs/LANTEC.h b/include/configs/LANTEC.h
index 2191c7b..46edd08 100644
--- a/include/configs/LANTEC.h
+++ b/include/configs/LANTEC.h
@@ -106,6 +106,7 @@
#undef CONFIG_CMD_IRQ
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MII
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
diff --git a/include/configs/MPC8260ADS.h b/include/configs/MPC8260ADS.h
index f3e5330..713518d 100644
--- a/include/configs/MPC8260ADS.h
+++ b/include/configs/MPC8260ADS.h
@@ -227,6 +227,7 @@
#undef CONFIG_CMD_HWFLOW
#undef CONFIG_CMD_IDE
#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_PCMCIA
@@ -405,9 +406,9 @@
#define CFG_BCR 0x100C0000
#define CFG_SIUMCR 0x0A200000
#define CFG_SCCR SCCR_DFBRG01
-#define CFG_BR0_PRELIM CFG_FLASH_BASE | 0x00001801
+#define CFG_BR0_PRELIM (CFG_FLASH_BASE | 0x00001801)
#define CFG_OR0_PRELIM 0xFF800876
-#define CFG_BR1_PRELIM CFG_BCSR | 0x00001801
+#define CFG_BR1_PRELIM (CFG_BCSR | 0x00001801)
#define CFG_OR1_PRELIM 0xFFFF8010
/*We need to configure chip select to use CPLD PCI IC on MPC8272ADS*/
diff --git a/include/configs/MPC8266ADS.h b/include/configs/MPC8266ADS.h
index 3a6c977..14b041e 100644
--- a/include/configs/MPC8266ADS.h
+++ b/include/configs/MPC8266ADS.h
@@ -165,6 +165,7 @@
#undef CONFIG_CMD_IDE
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_PCMCIA
diff --git a/include/configs/MPC8313ERDB.h b/include/configs/MPC8313ERDB.h
index 45a7d81..81db96f 100644
--- a/include/configs/MPC8313ERDB.h
+++ b/include/configs/MPC8313ERDB.h
@@ -265,7 +265,7 @@
#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
#define CFG_I2C_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
diff --git a/include/configs/MPC8641HPCN.h b/include/configs/MPC8641HPCN.h
index 808c19f..5a511e5 100644
--- a/include/configs/MPC8641HPCN.h
+++ b/include/configs/MPC8641HPCN.h
@@ -46,8 +46,10 @@
#define CFG_RESET_ADDRESS 0xfff00100
-/*#undef CONFIG_PCI*/
-#define CONFIG_PCI
+#define CONFIG_PCI 1 /* Enable PCI/PCIE */
+#define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */
+#define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */
+#define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */
#define CONFIG_TSEC_ENET /* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
@@ -76,6 +78,9 @@
#define L2_ENABLE (L2CR_L2E)
#ifndef CONFIG_SYS_CLK_FREQ
+#ifndef __ASSEMBLY__
+extern unsigned long get_board_sys_clk(unsigned long dummy);
+#endif
#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0)
#endif
@@ -93,6 +98,9 @@
#define CFG_CCSRBAR 0xf8000000 /* relocated CCSRBAR */
#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
+#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
+#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
+
/*
* DDR Setup
*/
@@ -296,9 +304,9 @@
#define CFG_PCI1_MEM_BASE 0x80000000
#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
-#define CFG_PCI1_IO_BASE 0xe2000000
-#define CFG_PCI1_IO_PHYS CFG_PCI1_IO_BASE
-#define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI1_IO_BASE 0x00000000
+#define CFG_PCI1_IO_PHYS 0xe2000000
+#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
/* PCI view of System Memory */
#define CFG_PCI_MEMORY_BUS 0x00000000
@@ -311,10 +319,10 @@
#define CFG_PCI2_MEM_BASE 0xa0000000
#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
-#define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */
-#define CFG_PCI2_IO_BASE 0xe3000000
-#define CFG_PCI2_IO_PHYS CFG_PCI2_IO_BASE
-#define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */
+#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
+#define CFG_PCI2_IO_BASE 0x00000000
+#define CFG_PCI2_IO_PHYS 0xe3000000
+#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
#if defined(CONFIG_PCI)
@@ -396,20 +404,20 @@
* 0xa000_0000 512M PCI-Express 2 Memory
* Changed it for operating from 0xd0000000
*/
-#define CFG_DBAT1L ( CFG_PCI1_MEM_BASE | BATL_PP_RW \
+#define CFG_DBAT1L ( CFG_PCI1_MEM_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
-#define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_DBAT1U (CFG_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP)
+#define CFG_IBAT1L (CFG_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT1U CFG_DBAT1U
/*
* BAT2 512M Cache-inhibited, guarded
* 0xc000_0000 512M RapidIO Memory
*/
-#define CFG_DBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW \
+#define CFG_DBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT2U (CFG_RIO_MEM_BASE | BATU_BL_512M | BATU_VS | BATU_VP)
-#define CFG_IBAT2L (CFG_RIO_MEM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_DBAT2U (CFG_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L (CFG_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT2U CFG_DBAT2U
/*
@@ -428,10 +436,10 @@
* 0xe300_0000 16M PCI-Express 2 I/0
* Note that this is at 0xe0000000
*/
-#define CFG_DBAT4L ( CFG_PCI1_IO_BASE | BATL_PP_RW \
+#define CFG_DBAT4L ( CFG_PCI1_IO_PHYS | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CFG_DBAT4U (CFG_PCI1_IO_BASE | BATU_BL_32M | BATU_VS | BATU_VP)
-#define CFG_IBAT4L (CFG_PCI1_IO_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
+#define CFG_DBAT4U (CFG_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP)
+#define CFG_IBAT4L (CFG_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT)
#define CFG_IBAT4U CFG_DBAT4U
/*
diff --git a/include/configs/RBC823.h b/include/configs/RBC823.h
index 5e12dab..2f6de81 100644
--- a/include/configs/RBC823.h
+++ b/include/configs/RBC823.h
@@ -119,6 +119,7 @@
#undef CONFIG_CMD_IRQ
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_PCI
diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index f412ec8..025c249 100644
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -321,6 +321,7 @@
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_KGDB
#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_NAND
#undef CONFIG_CMD_PCI
diff --git a/include/configs/gw8260.h b/include/configs/gw8260.h
index 79e6aa1..ff57240 100644
--- a/include/configs/gw8260.h
+++ b/include/configs/gw8260.h
@@ -294,7 +294,7 @@
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_BOOTFILESIZE
-#definef CONFIG_BOOTP_DNS
+#define CONFIG_BOOTP_DNS
/* undef this to save memory */
#define CFG_LONGHELP
diff --git a/include/configs/hymod.h b/include/configs/hymod.h
index b789067..2f64ec2 100644
--- a/include/configs/hymod.h
+++ b/include/configs/hymod.h
@@ -199,6 +199,7 @@
#undef CONFIG_CMD_IDE
#undef CONFIG_CMD_JFFS2
#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_MFSL
#undef CONFIG_CMD_MMC
#undef CONFIG_CMD_PCMCIA
#undef CONFIG_CMD_PCI
diff --git a/include/configs/mpc7448hpc2.h b/include/configs/mpc7448hpc2.h
index 4237228..f4f33f3 100644
--- a/include/configs/mpc7448hpc2.h
+++ b/include/configs/mpc7448hpc2.h
@@ -375,9 +375,9 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#define CFG_MAX_FLASH_BANKS 1/* Flash can be at one of two addresses */
+#define CFG_MAX_FLASH_BANKS 1 /* Flash can be at one of two addresses */
#define FLASH_BANK_SIZE 0x01000000 /* 16 MB Total */
-#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE2}
+#define CFG_FLASH_BANKS_LIST { CFG_FLASH_BASE, /* CFG_FLASH_BASE2 */ }
#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
diff --git a/include/configs/ppmc7xx.h b/include/configs/ppmc7xx.h
index 6e451d8..fe7de7b 100644
--- a/include/configs/ppmc7xx.h
+++ b/include/configs/ppmc7xx.h
@@ -25,29 +25,30 @@
/*
* Debug
*
- * DEBUG - Define this is you want extra debug info
- * GTREGREAD - Required to build with debug
- * do_bdinfo - Required to build with debug
+ * DEBUG - Define this is you want extra debug info
+ * GTREGREAD - Required to build with debug
+ * do_bdinfo - Required to build with debug
*/
#undef DEBUG
-#define GTREGREAD(x) 0xFFFFFFFF
+#ifdef DEBUG
+#define GTREGREAD(x) 0xFFFFFFFF
#define do_bdinfo(a,b,c,d)
-
+#endif
/*
* CPU type
*
- * CONFIG_7xx - We have a 750 or 755 CPU
- * CONFIG_74xx - We have a 7400 CPU
- * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
- * CONFIG_BUS_CLK - System bus clock in Hz
+ * CONFIG_7xx - We have a 750 or 755 CPU
+ * CONFIG_74xx - We have a 7400 CPU
+ * CONFIG_ALTIVEC - We have altivec enabled CPU (only 7400)
+ * CONFIG_BUS_CLK - System bus clock in Hz
*/
#define CONFIG_7xx
#undef CONFIG_74xx
#undef CONFIG_ALTIVEC
-#define CONFIG_BUS_CLK 66000000
+#define CONFIG_BUS_CLK 66000000
/*
@@ -97,18 +98,18 @@
* Serial configuration
*
* CONFIG_CONS_INDEX - Serial console port number (COM1)
- * CONFIG_BAUDRATE - Serial speed
+ * CONFIG_BAUDRATE - Serial speed
*/
-#define CONFIG_CONS_INDEX 1
-#define CONFIG_BAUDRATE 9600
+#define CONFIG_CONS_INDEX 1
+#define CONFIG_BAUDRATE 9600
/*
* PCI config
*
- * CONFIG_PCI - Enable PCI bus
- * CONFIG_PCI_PNP - Enable Plug & Play support
+ * CONFIG_PCI - Enable PCI bus
+ * CONFIG_PCI_PNP - Enable Plug & Play support
* CONFIG_PCI_SCAN_SHOW - Enable display of devices at startup
*/
@@ -120,9 +121,9 @@
/*
* Network config
*
- * CONFIG_NET_MULTI - Support for multiple network interfaces
- * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
- * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
+ * CONFIG_NET_MULTI - Support for multiple network interfaces
+ * CONFIG_EEPRO100 - Intel 8255x Ethernet Controller
+ * CONFIG_EEPRO100_SROM_WRITE - Enable writing to network card ROM
*/
#define CONFIG_NET_MULTI
@@ -145,7 +146,7 @@
* Boot config
*
* CONFIG_BOOTCOMMAND - Command(s) to execute to auto-boot
- * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
+ * CONFIG_BOOTDELAY - How long to wait before auto-boot (in sec)
*/
#define CONFIG_BOOTCOMMAND \
@@ -169,79 +170,79 @@
*
* This board runs in a standard CHRP (Map-B) configuration.
*
- * Type Start End Size Width Chip Sel
+ * Type Start End Size Width Chip Sel
* ----------- ----------- ----------- ------- ------- --------
- * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
- * User LED's 0x78000000 RCS3
- * UART 0x7C000000 RCS2
- * Mailbox 0xFF000000 RCS1
- * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
+ * SDRAM 0x00000000 0x04000000 64MB 64b SDRAMCS0
+ * User LED's 0x78000000 RCS3
+ * UART 0x7C000000 RCS2
+ * Mailbox 0xFF000000 RCS1
+ * Flash 0xFFC00000 0xFFFFFFFF 4MB 64b RCS0
*
* Flash sectors are laid out as follows.
*
- * Sector Start End Size Comments
+ * Sector Start End Size Comments
* ------- ----------- ----------- ------- -----------
- * 0 0xFFC00000 0xFFC3FFFF 256KB
- * 1 0xFFC40000 0xFFC7FFFF 256KB
- * 2 0xFFC80000 0xFFCBFFFF 256KB
- * 3 0xFFCC0000 0xFFCFFFFF 256KB
- * 4 0xFFD00000 0xFFD3FFFF 256KB
- * 5 0xFFD40000 0xFFD7FFFF 256KB
- * 6 0xFFD80000 0xFFDBFFFF 256KB
- * 7 0xFFDC0000 0xFFDFFFFF 256KB
- * 8 0xFFE00000 0xFFE3FFFF 256KB
- * 9 0xFFE40000 0xFFE7FFFF 256KB
- * 10 0xFFE80000 0xFFEBFFFF 256KB
- * 11 0xFFEC0000 0xFFEFFFFF 256KB
- * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here
- * 13 0xFFF40000 0xFFF7FFFF 256KB
- * 14 0xFFF80000 0xFFFBFFFF 256KB
- * 15 0xFFFC0000 0xFFFDFFFF 128KB
- * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here
- * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here
- * 18 0xFFFF0000 0xFFFFFFFF 64KB
+ * 0 0xFFC00000 0xFFC3FFFF 256KB
+ * 1 0xFFC40000 0xFFC7FFFF 256KB
+ * 2 0xFFC80000 0xFFCBFFFF 256KB
+ * 3 0xFFCC0000 0xFFCFFFFF 256KB
+ * 4 0xFFD00000 0xFFD3FFFF 256KB
+ * 5 0xFFD40000 0xFFD7FFFF 256KB
+ * 6 0xFFD80000 0xFFDBFFFF 256KB
+ * 7 0xFFDC0000 0xFFDFFFFF 256KB
+ * 8 0xFFE00000 0xFFE3FFFF 256KB
+ * 9 0xFFE40000 0xFFE7FFFF 256KB
+ * 10 0xFFE80000 0xFFEBFFFF 256KB
+ * 11 0xFFEC0000 0xFFEFFFFF 256KB
+ * 12 0xFFF00000 0xFFF3FFFF 256KB U-Boot code here
+ * 13 0xFFF40000 0xFFF7FFFF 256KB
+ * 14 0xFFF80000 0xFFFBFFFF 256KB
+ * 15 0xFFFC0000 0xFFFDFFFF 128KB
+ * 16 0xFFFE0000 0xFFFE7FFF 32KB U-Boot env vars here
+ * 17 0xFFFE8000 0xFFFEFFFF 32KB U-Boot backup copy of env vars here
+ * 18 0xFFFF0000 0xFFFFFFFF 64KB
*/
/*
* SDRAM config - see memory map details above.
*
- * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
- * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
+ * CFG_SDRAM_BASE - Start address of SDRAM, this _must_ be zero!
+ * CFG_SDRAM_SIZE - Total size of contiguous SDRAM bank(s)
*/
-#define CFG_SDRAM_BASE 0x00000000
-#define CFG_SDRAM_SIZE 0x04000000
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_SDRAM_SIZE 0x04000000
/*
* Flash config - see memory map details above.
*
- * CFG_FLASH_BASE - Start address of flash memory
- * CFG_FLASH_SIZE - Total size of contiguous flash mem
+ * CFG_FLASH_BASE - Start address of flash memory
+ * CFG_FLASH_SIZE - Total size of contiguous flash mem
* CFG_FLASH_ERASE_TOUT - Erase timeout in ms
* CFG_FLASH_WRITE_TOUT - Write timeout in ms
* CFG_MAX_FLASH_BANKS - Number of banks of flash on board
* CFG_MAX_FLASH_SECT - Number of sectors in a bank
*/
-#define CFG_FLASH_BASE 0xFFC00000
-#define CFG_FLASH_SIZE 0x00400000
+#define CFG_FLASH_BASE 0xFFC00000
+#define CFG_FLASH_SIZE 0x00400000
#define CFG_FLASH_ERASE_TOUT 250000
#define CFG_FLASH_WRITE_TOUT 5000
-#define CFG_MAX_FLASH_BANKS 1
-#define CFG_MAX_FLASH_SECT 19
+#define CFG_MAX_FLASH_BANKS 1
+#define CFG_MAX_FLASH_SECT 19
/*
* Monitor config - see memory map details above
*
- * CFG_MONITOR_BASE - Base address of monitor code
- * CFG_MALLOC_LEN - Size of malloc pool (128KB)
+ * CFG_MONITOR_BASE - Base address of monitor code
+ * CFG_MALLOC_LEN - Size of malloc pool (128KB)
*/
-#define CFG_MONITOR_BASE TEXT_BASE
-#define CFG_MALLOC_LEN 0x20000
+#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_MALLOC_LEN 0x20000
/*
@@ -259,16 +260,16 @@
* CFG_PROMPT - Prompt string
*/
-#define CFG_BARGSIZE 1024
-#define CFG_BOOTMAPSZ 0x800000
-#define CFG_CBSIZE 1024
-#define CFG_LOAD_ADDR 0x100000
+#define CFG_BARGSIZE 1024
+#define CFG_BOOTMAPSZ 0x800000
+#define CFG_CBSIZE 1024
+#define CFG_LOAD_ADDR 0x100000
#define CFG_LONGHELP
-#define CFG_MAXARGS 16
-#define CFG_MEMTEST_START 0x00040000
-#define CFG_MEMTEST_END 0x00040100
-#define CFG_PBSIZE 1024
-#define CFG_PROMPT "=> "
+#define CFG_MAXARGS 16
+#define CFG_MEMTEST_START 0x00040000
+#define CFG_MEMTEST_END 0x00040100
+#define CFG_PBSIZE 1024
+#define CFG_PROMPT "=> "
/*
@@ -280,12 +281,12 @@
* CFG_ENV_SECT_SIZE - Size of sector containing env vars (32KB)
*/
-#define CFG_ENV_IS_IN_FLASH 1
-#define CFG_ENV_ADDR 0xFFFE0000
-#define CFG_ENV_SIZE 0x1000
-#define CFG_ENV_ADDR_REDUND 0xFFFE8000
-#define CFG_ENV_SIZE_REDUND 0x1000
-#define CFG_ENV_SECT_SIZE 0x8000
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_ADDR 0xFFFE0000
+#define CFG_ENV_SIZE 0x1000
+#define CFG_ENV_ADDR_REDUND 0xFFFE8000
+#define CFG_ENV_SIZE_REDUND 0x1000
+#define CFG_ENV_SECT_SIZE 0x8000
/*
@@ -296,15 +297,15 @@
* copied to top of RAM by the init code.
*
* CFG_INIT_RAM_ADDR - Address of Init RAM, above exception vect
- * CFG_INIT_RAM_END - Size of Init RAM
+ * CFG_INIT_RAM_END - Size of Init RAM
* CFG_GBL_DATA_SIZE - Ammount of RAM to reserve for global data
* CFG_GBL_DATA_OFFSET - Start of global data, top of stack
*/
-#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000)
-#define CFG_INIT_RAM_END 0x4000
-#define CFG_GBL_DATA_SIZE 128
-#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_RAM_ADDR (CFG_SDRAM_BASE + 0x4000)
+#define CFG_INIT_RAM_END 0x4000
+#define CFG_GBL_DATA_SIZE 128
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
/*
@@ -341,71 +342,71 @@
* Cache config
*
* CFG_CACHELINE_SIZE - Size of a cache line (CPU specific)
- * CFG_L2 - L2 cache enabled if defined
- * L2_INIT - L2 cache init flags
- * L2_ENABLE - L2 cache enable flags
+ * CFG_L2 - L2 cache enabled if defined
+ * L2_INIT - L2 cache init flags
+ * L2_ENABLE - L2 cache enable flags
*/
-#define CFG_CACHELINE_SIZE 32
+#define CFG_CACHELINE_SIZE 32
#undef CFG_L2
-#define L2_INIT 0
-#define L2_ENABLE 0
+#define L2_INIT 0
+#define L2_ENABLE 0
/*
* Clocks config
*
- * CFG_BUS_HZ - Bus clock frequency in Hz
- * CFG_BUS_CLK - As above (?)
- * CFG_HZ - Decrementer freq in Hz
+ * CFG_BUS_HZ - Bus clock frequency in Hz
+ * CFG_BUS_CLK - As above (?)
+ * CFG_HZ - Decrementer freq in Hz
*/
-#define CFG_BUS_HZ CONFIG_BUS_CLK
-#define CFG_BUS_CLK CONFIG_BUS_CLK
-#define CFG_HZ 1000
+#define CFG_BUS_HZ CONFIG_BUS_CLK
+#define CFG_BUS_CLK CONFIG_BUS_CLK
+#define CFG_HZ 1000
/*
* Serial port config
*
* CFG_BAUDRATE_TABLE - List of valid baud rates
- * CFG_NS16550 - Include the NS16550 driver
+ * CFG_NS16550 - Include the NS16550 driver
* CFG_NS16550_SERIAL - Include the serial (wrapper) driver
- * CFG_NS16550_CLK - Frequency of reference clock
+ * CFG_NS16550_CLK - Frequency of reference clock
* CFG_NS16550_REG_SIZE - 64-bit accesses to 8-bit port
- * CFG_NS16550_COM1 - Base address of 1st serial port
+ * CFG_NS16550_COM1 - Base address of 1st serial port
*/
-#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
#define CFG_NS16550
#define CFG_NS16550_SERIAL
-#define CFG_NS16550_CLK 3686400
+#define CFG_NS16550_CLK 3686400
#define CFG_NS16550_REG_SIZE -8
-#define CFG_NS16550_COM1 0x7C000000
+#define CFG_NS16550_COM1 0x7C000000
/*
* PCI Config - Address Map B (CHRP)
*/
-#define CFG_PCI_MEMORY_BUS 0x00000000
-#define CFG_PCI_MEMORY_PHYS 0x00000000
-#define CFG_PCI_MEMORY_SIZE 0x40000000
-#define CFG_PCI_MEM_BUS 0x80000000
-#define CFG_PCI_MEM_PHYS 0x80000000
-#define CFG_PCI_MEM_SIZE 0x7D000000
-#define CFG_ISA_MEM_BUS 0x00000000
-#define CFG_ISA_MEM_PHYS 0xFD000000
-#define CFG_ISA_MEM_SIZE 0x01000000
-#define CFG_PCI_IO_BUS 0x00800000
-#define CFG_PCI_IO_PHYS 0xFE800000
-#define CFG_PCI_IO_SIZE 0x00400000
-#define CFG_ISA_IO_BUS 0x00000000
-#define CFG_ISA_IO_PHYS 0xFE000000
-#define CFG_ISA_IO_SIZE 0x00800000
+#define CFG_PCI_MEMORY_BUS 0x00000000
+#define CFG_PCI_MEMORY_PHYS 0x00000000
+#define CFG_PCI_MEMORY_SIZE 0x40000000
+#define CFG_PCI_MEM_BUS 0x80000000
+#define CFG_PCI_MEM_PHYS 0x80000000
+#define CFG_PCI_MEM_SIZE 0x7D000000
+#define CFG_ISA_MEM_BUS 0x00000000
+#define CFG_ISA_MEM_PHYS 0xFD000000
+#define CFG_ISA_MEM_SIZE 0x01000000
+#define CFG_PCI_IO_BUS 0x00800000
+#define CFG_PCI_IO_PHYS 0xFE800000
+#define CFG_PCI_IO_SIZE 0x00400000
+#define CFG_ISA_IO_BUS 0x00000000
+#define CFG_ISA_IO_PHYS 0xFE000000
+#define CFG_ISA_IO_SIZE 0x00800000
#define CFG_ISA_IO_BASE_ADDRESS CFG_ISA_IO_PHYS
-#define CFG_ISA_IO CFG_ISA_IO_PHYS
-#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS
+#define CFG_ISA_IO CFG_ISA_IO_PHYS
+#define CFG_60X_PCI_IO_OFFSET CFG_ISA_IO_PHYS
/*
@@ -420,12 +421,12 @@
/*
* Boot flags
*
- * BOOTFLAG_COLD - Indicates a power-on boot
- * BOOTFLAG_WARM - Indicates a software reset
+ * BOOTFLAG_COLD - Indicates a power-on boot
+ * BOOTFLAG_WARM - Indicates a software reset
*/
-#define BOOTFLAG_COLD 0x01
-#define BOOTFLAG_WARM 0x02
+#define BOOTFLAG_COLD 0x01
+#define BOOTFLAG_WARM 0x02
#endif /* __CONFIG_H */
diff --git a/include/configs/sbc8349.h b/include/configs/sbc8349.h
index 83a81fe..1831bef 100644
--- a/include/configs/sbc8349.h
+++ b/include/configs/sbc8349.h
@@ -328,7 +328,7 @@
#define CONFIG_I2C_CMD_TREE
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
#define CFG_I2C_SLAVE 0x7F
-#define CFG_I2C_NOPROBES {{0,0x69}} /* Don't probe these addrs */
+#define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */
#define CFG_I2C1_OFFSET 0x3000
#define CFG_I2C2_OFFSET 0x3100
#define CFG_I2C_OFFSET CFG_I2C2_OFFSET
diff --git a/include/exports.h b/include/exports.h
index 704b133..0516da9 100644
--- a/include/exports.h
+++ b/include/exports.h
@@ -23,6 +23,8 @@
unsigned long simple_strtoul(const char *cp,char **endp,unsigned int base);
char *getenv (char *name);
void setenv (char *varname, char *varvalue);
+long simple_strtol(const char *cp,char **endp,unsigned int base);
+int strcmp(const char * cs,const char * ct);
#if defined(CONFIG_CMD_I2C)
int i2c_write (uchar, uint, int , uchar* , int);
int i2c_read (uchar, uint, int , uchar* , int);
@@ -40,7 +42,7 @@
XF_MAX
};
-#define XF_VERSION 3
+#define XF_VERSION 4
#if defined(CONFIG_I386)
extern gd_t *global_data;
diff --git a/include/pci.h b/include/pci.h
index 7c9a0e3..8e5dacc 100644
--- a/include/pci.h
+++ b/include/pci.h
@@ -302,6 +302,12 @@
#define PCI_MAX_PCI_DEVICES 32
#define PCI_MAX_PCI_FUNCTIONS 8
+#define PCI_DCR 0x54 /* PCIe Device Control Register */
+#define PCI_DSR 0x56 /* PCIe Device Status Register */
+#define PCI_LSR 0x5e /* PCIe Link Status Register */
+#define PCI_LTSSM 0x404 /* PCIe Link Training, Status State Machine */
+#define PCI_LTSSM_L0 0x16 /* L0 state */
+
/* Include the ID list */
#include <pci_ids.h>