sunxi: video: Fallback from HDMI to VGA on boards with VGA
If a board has no LCD, but does have VGA fallback to VGA when no HDMI cable
is connected (unless hpd=0).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>
diff --git a/doc/README.video b/doc/README.video
index cfe6318..2c55d6a 100644
--- a/doc/README.video
+++ b/doc/README.video
@@ -50,8 +50,7 @@
- hpd=[0|1] - Enable use of the hdmi HotPlug Detect feature
0: Disabled. Configure dvi/hdmi output even if no cable is detected
- 1: Enabled. If a LCD has been configured fallback to the LCD when no cable is
- detected, if no LCD is configured, disable video ouput.
+ 1: Enabled. Fallback to the lcd / vga / none in that order (if available)
Defaults to hpd=1.
- edid=[0|1] - Enable use of DDC + EDID to get monitor info
diff --git a/drivers/video/sunxi_display.c b/drivers/video/sunxi_display.c
index eda04f7..5d5efd6 100644
--- a/drivers/video/sunxi_display.c
+++ b/drivers/video/sunxi_display.c
@@ -846,36 +846,43 @@
printf("Unknown monitor: '%s', falling back to '%s'\n",
mon, sunxi_get_mon_desc(sunxi_display.monitor));
- switch (sunxi_display.monitor) {
- case sunxi_monitor_none:
- return NULL;
- case sunxi_monitor_dvi:
- case sunxi_monitor_hdmi:
-#ifndef CONFIG_VIDEO_HDMI
- printf("HDMI/DVI not supported on this board\n");
- sunxi_display.monitor = sunxi_monitor_none;
- return NULL;
-#else
+#ifdef CONFIG_VIDEO_HDMI
+ /* If HDMI/DVI is selected do HPD & EDID, and handle fallback */
+ if (sunxi_display.monitor == sunxi_monitor_dvi ||
+ sunxi_display.monitor == sunxi_monitor_hdmi) {
/* Always call hdp_detect, as it also enables clocks, etc. */
ret = sunxi_hdmi_hpd_detect();
if (ret) {
printf("HDMI connected: ");
if (edid && sunxi_hdmi_edid_get_mode(&custom) == 0)
mode = &custom;
- break;
- }
- if (!hpd)
- break; /* User has requested to ignore hpd */
+ } else if (hpd) {
+ sunxi_hdmi_shutdown();
+ /* Fallback to lcd / vga / none */
+ if (lcd_mode[0]) {
+ sunxi_display.monitor = sunxi_monitor_lcd;
+ } else {
+#ifdef CONFIG_VIDEO_VGA_VIA_LCD
+ sunxi_display.monitor = sunxi_monitor_vga;
+#else
+ sunxi_display.monitor = sunxi_monitor_none;
+#endif
+ }
+ } /* else continue with hdmi/dvi without a cable connected */
+ }
+#endif
- sunxi_hdmi_shutdown();
-
- if (lcd_mode[0] == 0) {
- sunxi_display.monitor = sunxi_monitor_none;
- return NULL; /* No LCD, bail */
- }
-
- /* Fall back / through to LCD */
- sunxi_display.monitor = sunxi_monitor_lcd;
+ switch (sunxi_display.monitor) {
+ case sunxi_monitor_none:
+ return NULL;
+ case sunxi_monitor_dvi:
+ case sunxi_monitor_hdmi:
+#ifdef CONFIG_VIDEO_HDMI
+ break;
+#else
+ printf("HDMI/DVI not supported on this board\n");
+ sunxi_display.monitor = sunxi_monitor_none;
+ return NULL;
#endif
case sunxi_monitor_lcd:
if (lcd_mode[0]) {