Modified the mpc5xxx and the ppc4xx cpu to use the generic OHCI driver
and adapted board configs TQM5200 and yosemite accordingly. This commit
also makes the maximum number of root hub ports configurable
(CFG_USB_OHCI_MAX_ROOT_PORTS).
diff --git a/cpu/mpc5xxx/Makefile b/cpu/mpc5xxx/Makefile
index a97b625..94f82b2 100644
--- a/cpu/mpc5xxx/Makefile
+++ b/cpu/mpc5xxx/Makefile
@@ -28,7 +28,7 @@
START = start.o
ASOBJS = io.o firmware_sc_task_bestcomm.impl.o firmware_sc_task.impl.o
OBJS = i2c.o traps.o cpu.o cpu_init.o fec.o ide.o interrupts.o \
- loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o
+ loadtask.o pci_mpc5200.o serial.o speed.o usb_ohci.o usb.o
all: .depend $(START) $(ASOBJS) $(LIB)
diff --git a/cpu/ppc4xx/Makefile b/cpu/ppc4xx/Makefile
index c563457..ca68599 100644
--- a/cpu/ppc4xx/Makefile
+++ b/cpu/ppc4xx/Makefile
@@ -31,7 +31,8 @@
bedbug_405.o commproc.o \
cpu.o cpu_init.o i2c.o interrupts.o \
miiphy.o sdram.o serial.o \
- spd_sdram.o speed.o traps.o usb_ohci.o usbdev.o
+ spd_sdram.o speed.o traps.o \
+ usb_ohci.o usbdev.o usb.o
OBJS = $(AOBJS) $(COBJS)
diff --git a/drivers/usb_ohci.c b/drivers/usb_ohci.c
index 9b3ca12..be1a615 100644
--- a/drivers/usb_ohci.c
+++ b/drivers/usb_ohci.c
@@ -45,6 +45,7 @@
#ifdef CONFIG_USB_OHCI
+/* mk: are these really required? */
#if defined(CONFIG_S3C2400)
# include <s3c2400.h>
#elif defined(CONFIG_S3C2410)
@@ -53,6 +54,8 @@
# include <asm/arch/hardware.h>
#elif defined(CONFIG_CPU_MONAHANS)
# include <asm/arch/pxa-regs.h>
+#elif defined(CONFIG_MPC5200)
+# include <mpc5xxx.h>
#endif
#include <malloc.h>
@@ -557,8 +560,10 @@
* the link from the ed still points to another operational ed or 0
* so the HC can eventually finish the processing of the unlinked ed */
-static int ep_unlink (ohci_t *ohci, ed_t *ed)
+static int ep_unlink (ohci_t *ohci, ed_t *edi)
{
+ volatile ed_t *ed = edi;
+
ed->hwINFO |= m32_swap (OHCI_ED_SKIP);
switch (ed->type) {
@@ -825,6 +830,9 @@
} else
td_list->ed->hwHeadP &= m32_swap (0xfffffff2);
}
+#ifdef CONFIG_MPC5200
+ td_list->hwNextTD = 0;
+#endif
}
td_list->next_dl_td = td_rev;
@@ -1448,7 +1456,8 @@
readl(&ohci->regs->control));
/* Reset USB (needed by some controllers) */
- writel (0, &ohci->regs->control);
+ ohci->hc_control = 0;
+ writel (ohci->hc_control, &ohci->regs->control);
/* HC Reset requires max 10 us delay */
writel (OHCI_HCR, &ohci->regs->cmdstatus);
diff --git a/drivers/usb_ohci.h b/drivers/usb_ohci.h
index 68dd4ec..95fbc44 100644
--- a/drivers/usb_ohci.h
+++ b/drivers/usb_ohci.h
@@ -113,7 +113,9 @@
__u32 hwNextTD; /* Next TD Pointer */
__u32 hwBE; /* Memory Buffer End Pointer */
+/* #ifndef CONFIG_MPC5200 /\* this seems wrong *\/ */
__u16 hwPSW[MAXPSW];
+/* #endif */
__u8 unused;
__u8 index;
struct ed *ed;
@@ -137,8 +139,13 @@
#define NUM_INTS 32 /* part of the OHCI standard */
struct ohci_hcca {
__u32 int_table[NUM_INTS]; /* Interrupt ED table */
+#if defined(CONFIG_MPC5200)
+ __u16 pad1; /* set to 0 on each frame_no change */
+ __u16 frame_no; /* current frame number */
+#else
__u16 frame_no; /* current frame number */
__u16 pad1; /* set to 0 on each frame_no change */
+#endif
__u32 done_head; /* info returned for an interrupt */
u8 reserved_for_hc[116];
} __attribute((aligned(256)));
@@ -147,7 +154,9 @@
/*
* Maximum number of root hub ports.
*/
-#define MAX_ROOT_PORTS 3 /* maximum OHCI root hub ports */
+#ifndef CFG_USB_OHCI_MAX_ROOT_PORTS
+# error "CFG_USB_OHCI_MAX_ROOT_PORTS undefined!"
+#endif
/*
* This is the structure of the OHCI controller's memory mapped I/O
@@ -181,7 +190,7 @@
__u32 a;
__u32 b;
__u32 status;
- __u32 portstatus[MAX_ROOT_PORTS];
+ __u32 portstatus[CFG_USB_OHCI_MAX_ROOT_PORTS];
} roothub;
} __attribute((aligned(32)));
diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h
index be83b67..832dcdd 100644
--- a/include/configs/TQM5200.h
+++ b/include/configs/TQM5200.h
@@ -128,6 +128,13 @@
#define CONFIG_USB_OHCI
#define ADD_USB_CMD CFG_CMD_USB | CFG_CMD_FAT
#define CONFIG_USB_STORAGE
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT
+#define CFG_USB_OHCI_REGS_BASE MPC5XXX_USB
+#define CFG_USB_OHCI_SLOT_NAME "mpc5200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
#else
#define ADD_USB_CMD 0
#endif
diff --git a/include/configs/delta.h b/include/configs/delta.h
index fea821a..0617ad8 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -111,6 +111,7 @@
#define CFG_USB_OHCI_CPU_INIT 1
#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE
#define CFG_USB_OHCI_SLOT_NAME "delta"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 3
#define LITTLEENDIAN 1 /* used by usb_ohci.c */
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index edb20f8..d182d49 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -111,6 +111,7 @@
#define CFG_USB_OHCI_CPU_INIT 1
#define CFG_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
#define CFG_USB_OHCI_SLOT_NAME "at91rm9200"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
#undef CONFIG_HARD_I2C
diff --git a/include/configs/trab.h b/include/configs/trab.h
index ae97947..33617cd 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -88,6 +88,7 @@
#define CFG_USB_OHCI_CPU_INIT 1
#define CFG_USB_OHCI_REGS_BASE S3C24X0_USB_HOST_BASE
#define CFG_USB_OHCI_SLOT_NAME "s3c2400"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
/*
* Size of malloc() pool
diff --git a/include/configs/yosemite.h b/include/configs/yosemite.h
index a81cf34..e6a02c6 100644
--- a/include/configs/yosemite.h
+++ b/include/configs/yosemite.h
@@ -216,6 +216,12 @@
#define CONFIG_USB_OHCI
#define CONFIG_USB_STORAGE
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE (CFG_PERIPHERAL_BASE | 0x1000)
+#define CFG_USB_OHCI_SLOT_NAME "ppc440"
+#define CFG_USB_OHCI_MAX_ROOT_PORTS 15
+
/*Comment this out to enable USB 1.1 device*/
#define USB_2_0_DEVICE
#endif /*CONFIG_440EP*/