| # |
| # (C) Copyright 2000-2010 |
| # Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| # |
| # See file CREDITS for list of people who contributed to this |
| # project. |
| # |
| # This program is free software; you can redistribute it and/or |
| # modify it under the terms of the GNU General Public License as |
| # published by the Free Software Foundatio; either version 2 of |
| # the License, or (at your option) any later version. |
| # |
| # This program is distributed in the hope that it will be useful, |
| # but WITHOUT ANY WARRANTY; without even the implied warranty of |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| # GNU General Public License for more details. |
| # |
| # You should have received a copy of the GNU General Public License |
| # along with this program; if not, write to the Free Software |
| # Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| # MA 02111-1307 USA |
| # |
| |
| VERSION = 2010 |
| PATCHLEVEL = 06 |
| SUBLEVEL = |
| EXTRAVERSION = -rc2 |
| ifneq "$(SUBLEVEL)" "" |
| U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION) |
| else |
| U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL)$(EXTRAVERSION) |
| endif |
| TIMESTAMP_FILE = $(obj)include/timestamp_autogenerated.h |
| VERSION_FILE = $(obj)include/version_autogenerated.h |
| |
| HOSTARCH := $(shell uname -m | \ |
| sed -e s/i.86/i386/ \ |
| -e s/sun4u/sparc64/ \ |
| -e s/arm.*/arm/ \ |
| -e s/sa110/arm/ \ |
| -e s/ppc64/powerpc/ \ |
| -e s/ppc/powerpc/ \ |
| -e s/macppc/powerpc/) |
| |
| HOSTOS := $(shell uname -s | tr '[:upper:]' '[:lower:]' | \ |
| sed -e 's/\(cygwin\).*/cygwin/') |
| |
| # Set shell to bash if possible, otherwise fall back to sh |
| SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \ |
| else if [ -x /bin/bash ]; then echo /bin/bash; \ |
| else echo sh; fi; fi) |
| |
| export HOSTARCH HOSTOS SHELL |
| |
| # Deal with colliding definitions from tcsh etc. |
| VENDOR= |
| |
| ######################################################################### |
| # Allow for silent builds |
| ifeq (,$(findstring s,$(MAKEFLAGS))) |
| XECHO = echo |
| else |
| XECHO = : |
| endif |
| |
| ######################################################################### |
| # |
| # U-boot build supports producing a object files to the separate external |
| # directory. Two use cases are supported: |
| # |
| # 1) Add O= to the make command line |
| # 'make O=/tmp/build all' |
| # |
| # 2) Set environement variable BUILD_DIR to point to the desired location |
| # 'export BUILD_DIR=/tmp/build' |
| # 'make' |
| # |
| # The second approach can also be used with a MAKEALL script |
| # 'export BUILD_DIR=/tmp/build' |
| # './MAKEALL' |
| # |
| # Command line 'O=' setting overrides BUILD_DIR environent variable. |
| # |
| # When none of the above methods is used the local build is performed and |
| # the object files are placed in the source directory. |
| # |
| |
| ifdef O |
| ifeq ("$(origin O)", "command line") |
| BUILD_DIR := $(O) |
| endif |
| endif |
| |
| ifneq ($(BUILD_DIR),) |
| saved-output := $(BUILD_DIR) |
| |
| # Attempt to create a output directory. |
| $(shell [ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR}) |
| |
| # Verify if it was successful. |
| BUILD_DIR := $(shell cd $(BUILD_DIR) && /bin/pwd) |
| $(if $(BUILD_DIR),,$(error output directory "$(saved-output)" does not exist)) |
| endif # ifneq ($(BUILD_DIR),) |
| |
| OBJTREE := $(if $(BUILD_DIR),$(BUILD_DIR),$(CURDIR)) |
| SRCTREE := $(CURDIR) |
| TOPDIR := $(SRCTREE) |
| LNDIR := $(OBJTREE) |
| export TOPDIR SRCTREE OBJTREE |
| |
| MKCONFIG := $(SRCTREE)/mkconfig |
| export MKCONFIG |
| |
| ifneq ($(OBJTREE),$(SRCTREE)) |
| REMOTE_BUILD := 1 |
| export REMOTE_BUILD |
| endif |
| |
| # $(obj) and (src) are defined in config.mk but here in main Makefile |
| # we also need them before config.mk is included which is the case for |
| # some targets like unconfig, clean, clobber, distclean, etc. |
| ifneq ($(OBJTREE),$(SRCTREE)) |
| obj := $(OBJTREE)/ |
| src := $(SRCTREE)/ |
| else |
| obj := |
| src := |
| endif |
| export obj src |
| |
| # Make sure CDPATH settings don't interfere |
| unexport CDPATH |
| |
| ######################################################################### |
| |
| # The "tools" are needed early, so put this first |
| # Don't include stuff already done in $(LIBS) |
| SUBDIRS = tools \ |
| examples/standalone \ |
| examples/api |
| |
| .PHONY : $(SUBDIRS) |
| |
| ifeq ($(obj)include/config.mk,$(wildcard $(obj)include/config.mk)) |
| |
| # Include autoconf.mk before config.mk so that the config options are available |
| # to all top level build files. We need the dummy all: target to prevent the |
| # dependency target in autoconf.mk.dep from being the default. |
| all: |
| sinclude $(obj)include/autoconf.mk.dep |
| sinclude $(obj)include/autoconf.mk |
| |
| # load ARCH, BOARD, and CPU configuration |
| include $(obj)include/config.mk |
| export ARCH CPU BOARD VENDOR SOC |
| |
| # set default to nothing for native builds |
| ifeq ($(HOSTARCH),$(ARCH)) |
| CROSS_COMPILE ?= |
| endif |
| |
| # load other configuration |
| include $(TOPDIR)/config.mk |
| |
| ######################################################################### |
| # U-Boot objects....order is important (i.e. start must be first) |
| |
| OBJS = $(CPUDIR)/start.o |
| ifeq ($(CPU),i386) |
| OBJS += $(CPUDIR)/start16.o |
| OBJS += $(CPUDIR)/resetvec.o |
| endif |
| ifeq ($(CPU),ppc4xx) |
| OBJS += $(CPUDIR)/resetvec.o |
| endif |
| ifeq ($(CPU),mpc85xx) |
| OBJS += $(CPUDIR)/resetvec.o |
| endif |
| |
| OBJS := $(addprefix $(obj),$(OBJS)) |
| |
| LIBS = lib/libgeneric.a |
| LIBS += lib/lzma/liblzma.a |
| LIBS += lib/lzo/liblzo.a |
| LIBS += $(shell if [ -f board/$(VENDOR)/common/Makefile ]; then echo \ |
| "board/$(VENDOR)/common/lib$(VENDOR).a"; fi) |
| LIBS += $(CPUDIR)/lib$(CPU).a |
| ifdef SOC |
| LIBS += $(CPUDIR)/$(SOC)/lib$(SOC).a |
| endif |
| ifeq ($(CPU),ixp) |
| LIBS += arch/arm/cpu/ixp/npe/libnpe.a |
| endif |
| LIBS += arch/$(ARCH)/lib/lib$(ARCH).a |
| LIBS += fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a \ |
| fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a fs/yaffs2/libyaffs2.a \ |
| fs/ubifs/libubifs.a |
| LIBS += net/libnet.a |
| LIBS += disk/libdisk.a |
| LIBS += drivers/bios_emulator/libatibiosemu.a |
| LIBS += drivers/block/libblock.a |
| LIBS += drivers/dma/libdma.a |
| LIBS += drivers/fpga/libfpga.a |
| LIBS += drivers/gpio/libgpio.a |
| LIBS += drivers/hwmon/libhwmon.a |
| LIBS += drivers/i2c/libi2c.a |
| LIBS += drivers/input/libinput.a |
| LIBS += drivers/misc/libmisc.a |
| LIBS += drivers/mmc/libmmc.a |
| LIBS += drivers/mtd/libmtd.a |
| LIBS += drivers/mtd/nand/libnand.a |
| LIBS += drivers/mtd/onenand/libonenand.a |
| LIBS += drivers/mtd/ubi/libubi.a |
| LIBS += drivers/mtd/spi/libspi_flash.a |
| LIBS += drivers/net/libnet.a |
| LIBS += drivers/net/phy/libphy.a |
| LIBS += drivers/pci/libpci.a |
| LIBS += drivers/pcmcia/libpcmcia.a |
| LIBS += drivers/power/libpower.a |
| LIBS += drivers/spi/libspi.a |
| ifeq ($(CPU),mpc83xx) |
| LIBS += drivers/qe/qe.a |
| endif |
| ifeq ($(CPU),mpc85xx) |
| LIBS += drivers/qe/qe.a |
| LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a |
| LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a |
| endif |
| ifeq ($(CPU),mpc86xx) |
| LIBS += arch/powerpc/cpu/mpc8xxx/ddr/libddr.a |
| LIBS += arch/powerpc/cpu/mpc8xxx/lib8xxx.a |
| endif |
| LIBS += drivers/rtc/librtc.a |
| LIBS += drivers/serial/libserial.a |
| LIBS += drivers/twserial/libtws.a |
| LIBS += drivers/usb/gadget/libusb_gadget.a |
| LIBS += drivers/usb/host/libusb_host.a |
| LIBS += drivers/usb/musb/libusb_musb.a |
| LIBS += drivers/usb/phy/libusb_phy.a |
| LIBS += drivers/video/libvideo.a |
| LIBS += drivers/watchdog/libwatchdog.a |
| LIBS += common/libcommon.a |
| LIBS += lib/libfdt/libfdt.a |
| LIBS += api/libapi.a |
| LIBS += post/libpost.a |
| |
| LIBS := $(addprefix $(obj),$(LIBS)) |
| .PHONY : $(LIBS) $(TIMESTAMP_FILE) $(VERSION_FILE) |
| |
| LIBBOARD = board/$(BOARDDIR)/lib$(BOARD).a |
| LIBBOARD := $(addprefix $(obj),$(LIBBOARD)) |
| |
| # Add GCC lib |
| ifdef USE_PRIVATE_LIBGCC |
| ifeq ("$(USE_PRIVATE_LIBGCC)", "yes") |
| PLATFORM_LIBGCC = -L $(OBJTREE)/arch/$(ARCH)/lib -lgcc |
| else |
| PLATFORM_LIBGCC = -L $(USE_PRIVATE_LIBGCC) -lgcc |
| endif |
| else |
| PLATFORM_LIBGCC = -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc |
| endif |
| PLATFORM_LIBS += $(PLATFORM_LIBGCC) |
| export PLATFORM_LIBS |
| |
| # Special flags for CPP when processing the linker script. |
| # Pass the version down so we can handle backwards compatibility |
| # on the fly. |
| LDPPFLAGS += \ |
| -include $(TOPDIR)/include/u-boot/u-boot.lds.h \ |
| $(shell $(LD) --version | \ |
| sed -ne 's/GNU ld version \([0-9][0-9]*\)\.\([0-9][0-9]*\).*/-DLD_MAJOR=\1 -DLD_MINOR=\2/p') |
| |
| ifeq ($(CONFIG_NAND_U_BOOT),y) |
| NAND_SPL = nand_spl |
| U_BOOT_NAND = $(obj)u-boot-nand.bin |
| endif |
| |
| ifeq ($(CONFIG_ONENAND_U_BOOT),y) |
| ONENAND_IPL = onenand_ipl |
| U_BOOT_ONENAND = $(obj)u-boot-onenand.bin |
| ONENAND_BIN ?= $(obj)onenand_ipl/onenand-ipl-2k.bin |
| endif |
| |
| __OBJS := $(subst $(obj),,$(OBJS)) |
| __LIBS := $(subst $(obj),,$(LIBS)) $(subst $(obj),,$(LIBBOARD)) |
| |
| ######################################################################### |
| ######################################################################### |
| |
| # Always append ALL so that arch config.mk's can add custom ones |
| ALL += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND) $(U_BOOT_ONENAND) |
| |
| all: $(ALL) |
| |
| $(obj)u-boot.hex: $(obj)u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ |
| |
| $(obj)u-boot.srec: $(obj)u-boot |
| $(OBJCOPY) -O srec $< $@ |
| |
| $(obj)u-boot.bin: $(obj)u-boot |
| $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@ |
| |
| $(obj)u-boot.ldr: $(obj)u-boot |
| $(CREATE_LDR_ENV) |
| $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS) |
| |
| $(obj)u-boot.ldr.hex: $(obj)u-boot.ldr |
| $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@ -I binary |
| |
| $(obj)u-boot.ldr.srec: $(obj)u-boot.ldr |
| $(OBJCOPY) ${OBJCFLAGS} -O srec $< $@ -I binary |
| |
| $(obj)u-boot.img: $(obj)u-boot.bin |
| $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \ |
| -a $(TEXT_BASE) -e 0 \ |
| -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \ |
| sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \ |
| -d $< $@ |
| |
| $(obj)u-boot.imx: $(obj)u-boot.bin |
| $(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \ |
| -e $(TEXT_BASE) -d $< $@ |
| |
| $(obj)u-boot.kwb: $(obj)u-boot.bin |
| $(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \ |
| -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@ |
| |
| $(obj)u-boot.sha1: $(obj)u-boot.bin |
| $(obj)tools/ubsha1 $(obj)u-boot.bin |
| |
| $(obj)u-boot.dis: $(obj)u-boot |
| $(OBJDUMP) -d $< > $@ |
| |
| GEN_UBOOT = \ |
| UNDEF_SYM=`$(OBJDUMP) -x $(LIBBOARD) $(LIBS) | \ |
| sed -n -e 's/.*\($(SYM_PREFIX)__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\ |
| cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \ |
| --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \ |
| -Map u-boot.map -o u-boot |
| $(obj)u-boot: depend $(SUBDIRS) $(OBJS) $(LIBBOARD) $(LIBS) $(LDSCRIPT) $(obj)u-boot.lds |
| $(GEN_UBOOT) |
| ifeq ($(CONFIG_KALLSYMS),y) |
| smap=`$(call SYSTEM_MAP,u-boot) | \ |
| awk '$$2 ~ /[tTwW]/ {printf $$1 $$3 "\\\\000"}'` ; \ |
| $(CC) $(CFLAGS) -DSYSTEM_MAP="\"$${smap}\"" \ |
| -c common/system_map.c -o $(obj)common/system_map.o |
| $(GEN_UBOOT) $(obj)common/system_map.o |
| endif |
| |
| $(OBJS): depend |
| $(MAKE) -C $(CPUDIR) $(if $(REMOTE_BUILD),$@,$(notdir $@)) |
| |
| $(LIBS): depend $(SUBDIRS) |
| $(MAKE) -C $(dir $(subst $(obj),,$@)) |
| |
| $(LIBBOARD): depend $(LIBS) |
| $(MAKE) -C $(dir $(subst $(obj),,$@)) |
| |
| $(SUBDIRS): depend |
| $(MAKE) -C $@ all |
| |
| $(LDSCRIPT): depend |
| $(MAKE) -C $(dir $@) $(notdir $@) |
| |
| $(obj)u-boot.lds: $(LDSCRIPT) |
| $(CPP) $(CPPFLAGS) $(LDPPFLAGS) -ansi -D__ASSEMBLY__ -P - <$^ >$@ |
| |
| $(NAND_SPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk |
| $(MAKE) -C nand_spl/board/$(BOARDDIR) all |
| |
| $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot.bin |
| cat $(obj)nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin |
| |
| $(ONENAND_IPL): $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk |
| $(MAKE) -C onenand_ipl/board/$(BOARDDIR) all |
| |
| $(U_BOOT_ONENAND): $(ONENAND_IPL) $(obj)u-boot.bin |
| cat $(ONENAND_BIN) $(obj)u-boot.bin > $(obj)u-boot-onenand.bin |
| |
| $(VERSION_FILE): |
| @( printf '#define U_BOOT_VERSION "U-Boot %s%s"\n' "$(U_BOOT_VERSION)" \ |
| '$(shell $(TOPDIR)/tools/setlocalversion $(TOPDIR))' ) > $@.tmp |
| @cmp -s $@ $@.tmp && rm -f $@.tmp || mv -f $@.tmp $@ |
| |
| $(TIMESTAMP_FILE): |
| @date +'#define U_BOOT_DATE "%b %d %C%y"' > $@ |
| @date +'#define U_BOOT_TIME "%T"' >> $@ |
| |
| gdbtools: |
| $(MAKE) -C tools/gdb all || exit 1 |
| |
| updater: |
| $(MAKE) -C tools/updater all || exit 1 |
| |
| env: |
| $(MAKE) -C tools/env all MTD_VERSION=${MTD_VERSION} || exit 1 |
| |
| # Explicitly make _depend in subdirs containing multiple targets to prevent |
| # parallel sub-makes creating .depend files simultaneously. |
| depend dep: $(TIMESTAMP_FILE) $(VERSION_FILE) $(obj)include/autoconf.mk |
| for dir in $(SUBDIRS) $(CPUDIR) $(dir $(LDSCRIPT)) ; do \ |
| $(MAKE) -C $$dir _depend ; done |
| |
| TAG_SUBDIRS = $(SUBDIRS) |
| TAG_SUBDIRS += $(dir $(__LIBS)) |
| TAG_SUBDIRS += include |
| |
| tags ctags: |
| ctags -w -o $(obj)ctags `find $(TAG_SUBDIRS) \ |
| -name '*.[chS]' -print` |
| |
| etags: |
| etags -a -o $(obj)etags `find $(TAG_SUBDIRS) \ |
| -name '*.[chS]' -print` |
| cscope: |
| find $(TAG_SUBDIRS) -name '*.[chS]' -print > cscope.files |
| cscope -b -q -k |
| |
| SYSTEM_MAP = \ |
| $(NM) $1 | \ |
| grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \ |
| LC_ALL=C sort |
| $(obj)System.map: $(obj)u-boot |
| @$(call SYSTEM_MAP,$<) > $(obj)System.map |
| |
| # |
| # Auto-generate the autoconf.mk file (which is included by all makefiles) |
| # |
| # This target actually generates 2 files; autoconf.mk and autoconf.mk.dep. |
| # the dep file is only include in this top level makefile to determine when |
| # to regenerate the autoconf.mk file. |
| $(obj)include/autoconf.mk.dep: $(obj)include/config.h include/common.h |
| @$(XECHO) Generating $@ ; \ |
| set -e ; \ |
| : Generate the dependancies ; \ |
| $(CC) -x c -DDO_DEPS_ONLY -M $(HOSTCFLAGS) $(CPPFLAGS) \ |
| -MQ $(obj)include/autoconf.mk include/common.h > $@ |
| |
| $(obj)include/autoconf.mk: $(obj)include/config.h |
| @$(XECHO) Generating $@ ; \ |
| set -e ; \ |
| : Extract the config macros ; \ |
| $(CPP) $(CFLAGS) -DDO_DEPS_ONLY -dM include/common.h | \ |
| sed -n -f tools/scripts/define2mk.sed > $@.tmp && \ |
| mv $@.tmp $@ |
| |
| ######################################################################### |
| else # !config.mk |
| all $(obj)u-boot.hex $(obj)u-boot.srec $(obj)u-boot.bin \ |
| $(obj)u-boot.img $(obj)u-boot.dis $(obj)u-boot \ |
| $(filter-out tools,$(SUBDIRS)) $(TIMESTAMP_FILE) $(VERSION_FILE) gdbtools \ |
| updater env depend dep tags ctags etags cscope $(obj)System.map: |
| @echo "System not configured - see README" >&2 |
| @ exit 1 |
| |
| tools: |
| $(MAKE) -C tools |
| tools-all: |
| $(MAKE) -C tools HOST_TOOLS_ALL=y |
| endif # config.mk |
| |
| .PHONY : CHANGELOG |
| CHANGELOG: |
| git log --no-merges U-Boot-1_1_5.. | \ |
| unexpand -a | sed -e 's/\s\s*$$//' > $@ |
| |
| include/license.h: tools/bin2header COPYING |
| cat COPYING | gzip -9 -c | ./tools/bin2header license_gzip > include/license.h |
| ######################################################################### |
| |
| unconfig: |
| @rm -f $(obj)include/config.h $(obj)include/config.mk \ |
| $(obj)board/*/config.tmp $(obj)board/*/*/config.tmp \ |
| $(obj)include/autoconf.mk $(obj)include/autoconf.mk.dep |
| |
| %_config:: unconfig |
| @$(MKCONFIG) -A $(@:_config=) |
| |
| ##%: %_config |
| ## $(MAKE) |
| |
| # |
| # Functions to generate common board directory names |
| # |
| lcname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\L\1/') |
| ucname = $(shell echo $(1) | sed -e 's/\(.*\)_config/\U\1/') |
| |
| #======================================================================== |
| # PowerPC |
| #======================================================================== |
| |
| ######################################################################### |
| ## MPC5xxx Systems |
| ######################################################################### |
| |
| digsy_mtc_config \ |
| digsy_mtc_LOWBOOT_config \ |
| digsy_mtc_RAMBOOT_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/digsy_mtc |
| @ >$(obj)include/config.h |
| @[ -z "$(findstring LOWBOOT_,$@)" ] || \ |
| echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp |
| @[ -z "$(findstring RAMBOOT_,$@)" ] || \ |
| echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp |
| @$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc |
| |
| galaxy5200_LOWBOOT_config \ |
| galaxy5200_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a galaxy5200 powerpc mpc5xxx galaxy5200 |
| |
| Lite5200_config \ |
| Lite5200_LOWBOOT_config \ |
| Lite5200_LOWBOOT08_config \ |
| icecube_5200_config \ |
| icecube_5200_LOWBOOT_config \ |
| icecube_5200_LOWBOOT08_config \ |
| icecube_5200_DDR_config \ |
| icecube_5200_DDR_LOWBOOT_config \ |
| icecube_5200_DDR_LOWBOOT08_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/icecube |
| @[ -z "$(findstring LOWBOOT_,$@)" ] || \ |
| if [ "$(findstring DDR,$@)" ] ; \ |
| then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \ |
| else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \ |
| fi |
| @[ -z "$(findstring LOWBOOT08,$@)" ] || \ |
| echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp |
| @[ -z "$(findstring DDR,$@)" ] || \ |
| echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube |
| |
| lite5200b_config \ |
| lite5200b_PM_config \ |
| lite5200b_LOWBOOT_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/icecube |
| @ echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h |
| @ echo "#define CONFIG_LITE5200B" >>$(obj)include/config.h |
| @[ -z "$(findstring _PM_,$@)" ] || \ |
| echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h |
| @[ -z "$(findstring LOWBOOT_,$@)" ] || \ |
| echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp |
| @$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube |
| |
| mcc200_config \ |
| mcc200_SDRAM_config \ |
| mcc200_highboot_config \ |
| mcc200_COM12_config \ |
| mcc200_COM12_SDRAM_config \ |
| mcc200_COM12_highboot_config \ |
| mcc200_COM12_highboot_SDRAM_config \ |
| mcc200_highboot_SDRAM_config \ |
| prs200_config \ |
| prs200_DDR_config \ |
| prs200_highboot_config \ |
| prs200_highboot_DDR_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/mcc200 |
| @[ -z "$(findstring highboot,$@)" ] || \ |
| echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp |
| @[ -n "$(findstring _SDRAM,$@)" ] || \ |
| if [ -n "$(findstring prs200,$@)" ]; \ |
| then \ |
| if [ -z "$(findstring _DDR,$@)" ];\ |
| then \ |
| echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h ;\ |
| fi; \ |
| fi |
| @[ -z "$(findstring _SDRAM,$@)" ] || \ |
| echo "#define CONFIG_MCC200_SDRAM" >>$(obj)include/config.h |
| @[ -z "$(findstring COM12,$@)" ] || \ |
| echo "#define CONFIG_CONSOLE_COM12" >>$(obj)include/config.h |
| @[ -z "$(findstring prs200,$@)" ] || \ |
| echo "#define CONFIG_PRS200" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a mcc200 powerpc mpc5xxx mcc200 |
| |
| MVBC_P_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/mvbc_p |
| @ >$(obj)include/config.h |
| @[ -z "$(findstring MVBC_P,$@)" ] || \ |
| echo "#define CONFIG_MVBC_P" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a $@ powerpc mpc5xxx mvbc_p matrix_vision |
| |
| MVSMR_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/matrix_vision/mvsmr |
| @$(MKCONFIG) $@ powerpc mpc5xxx mvsmr matrix_vision |
| |
| pcm030_config \ |
| pcm030_LOWBOOT_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/phytec/pcm030 |
| @ >$(obj)include/config.h |
| @[ -z "$(findstring LOWBOOT_,$@)" ] || \ |
| echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp |
| @$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec |
| |
| PM520_config \ |
| PM520_DDR_config \ |
| PM520_ROMBOOT_config \ |
| PM520_ROMBOOT_DDR_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring DDR,$@)" ] || \ |
| echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h |
| @[ -z "$(findstring ROMBOOT,$@)" ] || \ |
| echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a PM520 powerpc mpc5xxx pm520 |
| |
| TB5200_B_config \ |
| TB5200_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _B,$@)" ] || \ |
| echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a TB5200 powerpc mpc5xxx tqm5200 tqc |
| |
| MINI5200_config \ |
| EVAL5200_config \ |
| TOP5200_config: unconfig |
| @mkdir -p $(obj)include |
| @ echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a TOP5200 powerpc mpc5xxx top5200 emk |
| |
| Total5200_config \ |
| Total5200_lowboot_config \ |
| Total5200_Rev2_config \ |
| Total5200_Rev2_lowboot_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/total5200 |
| @[ -n "$(findstring Rev,$@)" ] || \ |
| echo "#define CONFIG_TOTAL5200_REV 1" >>$(obj)include/config.h |
| @[ -z "$(findstring Rev2_,$@)" ] || \ |
| echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h |
| @[ -z "$(findstring lowboot_,$@)" ] || \ |
| echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp |
| @$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200 |
| |
| cam5200_config \ |
| cam5200_niosflash_config \ |
| fo300_config \ |
| MiniFAP_config \ |
| TQM5200S_config \ |
| TQM5200S_HIGHBOOT_config \ |
| TQM5200_B_config \ |
| TQM5200_B_HIGHBOOT_config \ |
| TQM5200_config \ |
| TQM5200_STK100_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/tqc/tqm5200 |
| @[ -z "$(findstring cam5200,$@)" ] || \ |
| { echo "#define CONFIG_CAM5200" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring niosflash,$@)" ] || \ |
| echo "#define CONFIG_CAM5200_NIOSFLASH" >>$(obj)include/config.h |
| @[ -z "$(findstring fo300,$@)" ] || \ |
| echo "#define CONFIG_FO300" >>$(obj)include/config.h |
| @[ -z "$(findstring MiniFAP,$@)" ] || \ |
| echo "#define CONFIG_MINIFAP" >>$(obj)include/config.h |
| @[ -z "$(findstring STK100,$@)" ] || \ |
| echo "#define CONFIG_STK52XX_REV100" >>$(obj)include/config.h |
| @[ -z "$(findstring TQM5200_B,$@)" ] || \ |
| echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h |
| @[ -z "$(findstring TQM5200S,$@)" ] || \ |
| { echo "#define CONFIG_TQM5200S" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring HIGHBOOT,$@)" ] || \ |
| echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp |
| @$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc |
| |
| ######################################################################### |
| ## MPC512x Systems |
| ######################################################################### |
| |
| mpc5121ads_config \ |
| mpc5121ads_rev2_config \ |
| : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring rev2,$@)" ] ; then \ |
| echo "#define CONFIG_ADS5121_REV2 1" > $(obj)include/config.h; \ |
| fi |
| @$(MKCONFIG) -n $@ -a mpc5121ads powerpc mpc512x mpc5121ads freescale |
| |
| ######################################################################### |
| ## MPC8xx Systems |
| ######################################################################### |
| |
| Adder87x_config \ |
| AdderII_config \ |
| AdderUSB_config \ |
| Adder_config \ |
| : unconfig |
| @mkdir -p $(obj)include |
| $(if $(findstring AdderII,$@), \ |
| @echo "#define CONFIG_MPC852T" > $(obj)include/config.h) |
| @$(MKCONFIG) -n $@ -a Adder powerpc mpc8xx adder |
| |
| ADS860_config \ |
| FADS823_config \ |
| FADS850SAR_config \ |
| MPC86xADS_config \ |
| MPC885ADS_config \ |
| FADS860T_config: unconfig |
| @$(MKCONFIG) -n $@ $@ powerpc mpc8xx fads |
| |
| GEN860T_SC_config \ |
| GEN860T_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _SC,$@)" ] || \ |
| echo "#define CONFIG_SC" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a GEN860T powerpc mpc8xx gen860t |
| |
| ICU862_100MHz_config \ |
| ICU862_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _100MHz,$@)" ] || \ |
| echo "#define CONFIG_100MHz" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a ICU862 powerpc mpc8xx icu862 |
| |
| IVML24_256_config \ |
| IVML24_128_config \ |
| IVML24_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring IVML24_config,$@)" ] || \ |
| echo "#define CONFIG_IVML24_16M" >>$(obj)include/config.h |
| @[ -z "$(findstring IVML24_128_config,$@)" ] || \ |
| echo "#define CONFIG_IVML24_32M" >>$(obj)include/config.h |
| @[ -z "$(findstring IVML24_256_config,$@)" ] || \ |
| echo "#define CONFIG_IVML24_64M" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a IVML24 powerpc mpc8xx ivm |
| |
| IVMS8_256_config \ |
| IVMS8_128_config \ |
| IVMS8_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring IVMS8_config,$@)" ] || \ |
| echo "#define CONFIG_IVMS8_16M" >>$(obj)include/config.h |
| @[ -z "$(findstring IVMS8_128_config,$@)" ] || \ |
| echo "#define CONFIG_IVMS8_32M" >>$(obj)include/config.h |
| @[ -z "$(findstring IVMS8_256_config,$@)" ] || \ |
| echo "#define CONFIG_IVMS8_64M" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a IVMS8 powerpc mpc8xx ivm |
| |
| MBX_config \ |
| MBX860T_config: unconfig |
| @$(MKCONFIG) -n $@ $@ powerpc mpc8xx mbx8xx |
| |
| NETVIA_V2_config \ |
| NETVIA_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring NETVIA_config,$@)" ] || \ |
| echo "#define CONFIG_NETVIA_VERSION 1" >>$(obj)include/config.h |
| @[ -z "$(findstring NETVIA_V2_config,$@)" ] || \ |
| echo "#define CONFIG_NETVIA_VERSION 2" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a NETVIA powerpc mpc8xx netvia |
| |
| NETPHONE_V2_config \ |
| NETPHONE_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring NETPHONE_config,$@)" ] || \ |
| echo "#define CONFIG_NETPHONE_VERSION 1" >>$(obj)include/config.h |
| @[ -z "$(findstring NETPHONE_V2_config,$@)" ] || \ |
| echo "#define CONFIG_NETPHONE_VERSION 2" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a NETPHONE powerpc mpc8xx netphone |
| |
| NETTA_ISDN_6412_SWAPHOOK_config \ |
| NETTA_ISDN_SWAPHOOK_config \ |
| NETTA_6412_SWAPHOOK_config \ |
| NETTA_SWAPHOOK_config \ |
| NETTA_ISDN_6412_config \ |
| NETTA_ISDN_config \ |
| NETTA_6412_config \ |
| NETTA_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring ISDN_,$@)" ] || \ |
| echo "#define CONFIG_NETTA_ISDN 1" >>$(obj)include/config.h |
| @[ -n "$(findstring ISDN_,$@)" ] || \ |
| echo "#undef CONFIG_NETTA_ISDN" >>$(obj)include/config.h |
| @[ -z "$(findstring 6412_,$@)" ] || \ |
| echo "#define CONFIG_NETTA_6412 1" >>$(obj)include/config.h |
| @[ -n "$(findstring 6412_,$@)" ] || \ |
| echo "#undef CONFIG_NETTA_6412" >>$(obj)include/config.h |
| @[ -z "$(findstring SWAPHOOK_,$@)" ] || \ |
| echo "#define CONFIG_NETTA_SWAPHOOK 1" >>$(obj)include/config.h |
| @[ -n "$(findstring SWAPHOOK_,$@)" ] || \ |
| echo "#undef CONFIG_NETTA_SWAPHOOK" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a NETTA powerpc mpc8xx netta |
| |
| NETTA2_V2_config \ |
| NETTA2_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring NETTA2_config,$@)" ] || \ |
| echo "#define CONFIG_NETTA2_VERSION 1" >>$(obj)include/config.h |
| @[ -z "$(findstring NETTA2_V2_config,$@)" ] || \ |
| echo "#define CONFIG_NETTA2_VERSION 2" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a NETTA2 powerpc mpc8xx netta2 |
| |
| NC650_Rev1_config \ |
| NC650_Rev2_config \ |
| CP850_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring CP850,$@)" ] || \ |
| { echo "#define CONFIG_CP850 1" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring Rev1,$@)" ] || \ |
| { echo "#define CONFIG_IDS852_REV1 1" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring Rev2,$@)" ] || \ |
| { echo "#define CONFIG_IDS852_REV2 1" >>$(obj)include/config.h ; \ |
| } |
| @$(MKCONFIG) -n $@ -a NC650 powerpc mpc8xx nc650 |
| |
| RPXlite_DW_64_config \ |
| RPXlite_DW_LCD_config \ |
| RPXlite_DW_64_LCD_config \ |
| RPXlite_DW_NVRAM_config \ |
| RPXlite_DW_NVRAM_64_config \ |
| RPXlite_DW_NVRAM_LCD_config \ |
| RPXlite_DW_NVRAM_64_LCD_config \ |
| RPXlite_DW_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _64,$@)" ] || \ |
| echo "#define RPXlite_64MHz" >>$(obj)include/config.h |
| @[ -z "$(findstring _LCD,$@)" ] || \ |
| { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring _NVRAM,$@)" ] || \ |
| echo "#define CONFIG_ENV_IS_IN_NVRAM" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a RPXlite_DW powerpc mpc8xx RPXlite_dw |
| |
| RRvision_LCD_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_LCD" >$(obj)include/config.h |
| @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h |
| @$(MKCONFIG) -a RRvision powerpc mpc8xx RRvision |
| |
| SPD823TS_config: unconfig |
| @$(MKCONFIG) $@ powerpc mpc8xx spd8xx |
| |
| SXNI855T_config: unconfig |
| @$(MKCONFIG) $@ powerpc mpc8xx sixnet |
| |
| # Play some tricks for configuration selection |
| # Only 855 and 860 boards may come with FEC |
| # and only 823 boards may have LCD support |
| xtract_8xx = $(subst _LCD,,$1) |
| |
| FPS850L_config \ |
| FPS860L_config \ |
| NSCU_config \ |
| TQM823L_config \ |
| TQM823L_LCD_config \ |
| TQM850L_config \ |
| TQM855L_config \ |
| TQM860L_config \ |
| TQM862L_config \ |
| TQM823M_config \ |
| TQM850M_config \ |
| TQM855M_config \ |
| TQM860M_config \ |
| TQM862M_config \ |
| TQM866M_config \ |
| TQM885D_config \ |
| TK885D_config \ |
| virtlab2_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _LCD,$@)" ] || \ |
| { echo "#define CONFIG_LCD" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_NEC_NL6448BC20" >>$(obj)include/config.h ; \ |
| } |
| @$(MKCONFIG) -n $@ -a $(call xtract_8xx,$@) powerpc mpc8xx tqm8xx tqc |
| |
| TTTech_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_LCD" >$(obj)include/config.h |
| @echo "#define CONFIG_SHARP_LQ104V7DS01" >>$(obj)include/config.h |
| @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc |
| |
| v37_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_LCD" >$(obj)include/config.h |
| @echo "#define CONFIG_SHARP_LQ084V1DG21" >>$(obj)include/config.h |
| @$(MKCONFIG) $@ powerpc mpc8xx v37 |
| |
| wtk_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_LCD" >$(obj)include/config.h |
| @echo "#define CONFIG_SHARP_LQ065T9DR51U" >>$(obj)include/config.h |
| @$(MKCONFIG) -a TQM823L powerpc mpc8xx tqm8xx tqc |
| |
| ######################################################################### |
| ## PPC4xx Systems |
| ######################################################################### |
| |
| acadia_nand_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/acadia |
| @mkdir -p $(obj)nand_spl/board/amcc/acadia |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| @$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc |
| |
| bamboo_nand_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/bamboo |
| @mkdir -p $(obj)nand_spl/board/amcc/bamboo |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| @$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc |
| |
| # Arches, Canyonlands & Glacier use different U-Boot images |
| arches_config \ |
| canyonlands_config \ |
| glacier_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc |
| |
| canyonlands_nand_config \ |
| glacier_nand_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/canyonlands |
| @mkdir -p $(obj)nand_spl/board/amcc/canyonlands |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| @$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc |
| |
| CATcenter_config \ |
| CATcenter_25_config \ |
| CATcenter_33_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "/* CATcenter uses PPChameleon Model ME */" > $(obj)include/config.h |
| @echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >> $(obj)include/config.h |
| @[ -z "$(findstring _25,$@)" ] || \ |
| echo "#define CONFIG_PPCHAMELEON_CLK_25" >> $(obj)include/config.h |
| @[ -z "$(findstring _33,$@)" ] || \ |
| echo "#define CONFIG_PPCHAMELEON_CLK_33" >> $(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a CATcenter powerpc ppc4xx PPChameleonEVB dave |
| |
| CPCI405_config \ |
| CPCI4052_config \ |
| CPCI405DT_config \ |
| CPCI405AB_config: unconfig |
| @mkdir -p $(obj)board/esd/cpci405 |
| @$(MKCONFIG) -n $@ $@ powerpc ppc4xx cpci405 esd |
| |
| fx12mm_flash_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic |
| @mkdir -p $(obj)include $(obj)board/avnet/fx12mm |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ |
| > $(obj)board/avnet/fx12mm/config.tmp |
| @echo "TEXT_BASE := 0xFFCB0000" \ |
| >> $(obj)board/avnet/fx12mm/config.tmp |
| @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet |
| |
| fx12mm_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic |
| @mkdir -p $(obj)include $(obj)board/avnet/fx12mm |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ |
| > $(obj)board/avnet/fx12mm/config.tmp |
| @echo "TEXT_BASE := 0x03000000" \ |
| >> $(obj)board/avnet/fx12mm/config.tmp |
| @$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet |
| |
| # Compact-Center(codename intip) & DevCon-Center use different U-Boot images |
| intip_config \ |
| devconcenter_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a intip powerpc ppc4xx intip gdsys |
| |
| hcu4_config \ |
| hcu5_config \ |
| mcu25_config: unconfig |
| @mkdir -p $(obj)board/netstal/common |
| @$(MKCONFIG) $@ powerpc ppc4xx $(call lcname,$@) netstal |
| |
| # Kilauea & Haleakala images are identical (recognized via PVR) |
| kilauea_config \ |
| haleakala_config: unconfig |
| @$(MKCONFIG) -n $@ kilauea powerpc ppc4xx kilauea amcc |
| |
| kilauea_nand_config \ |
| haleakala_nand_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/kilauea |
| @mkdir -p $(obj)nand_spl/board/amcc/kilauea |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| @$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc |
| |
| MIP405T_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MIP405T" >$(obj)include/config.h |
| @$(XECHO) "Enable subset config for MIP405T" |
| @$(MKCONFIG) -a MIP405 powerpc ppc4xx mip405 mpl |
| |
| ml507_flash_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @mkdir -p $(obj)include $(obj)board/xilinx/ml507 |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ |
| > $(obj)board/xilinx/ml507/config.tmp |
| @echo "TEXT_BASE := 0xFE360000" \ |
| >> $(obj)board/xilinx/ml507/config.tmp |
| @$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx |
| |
| ml507_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @mkdir -p $(obj)include $(obj)board/xilinx/ml507 |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ |
| > $(obj)board/xilinx/ml507/config.tmp |
| @echo "TEXT_BASE := 0x04000000" \ |
| >> $(obj)board/xilinx/ml507/config.tmp |
| @$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx |
| |
| OCRTC_config \ |
| ORSG_config: unconfig |
| @$(MKCONFIG) -n $@ $@ powerpc ppc4xx ocrtc esd |
| |
| PPChameleonEVB_config \ |
| PPChameleonEVB_BA_25_config \ |
| PPChameleonEVB_ME_25_config \ |
| PPChameleonEVB_HI_25_config \ |
| PPChameleonEVB_BA_33_config \ |
| PPChameleonEVB_ME_33_config \ |
| PPChameleonEVB_HI_33_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring EVB_BA,$@)" ] || \ |
| echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 0" >>$(obj)include/config.h |
| @[ -z "$(findstring EVB_ME,$@)" ] || \ |
| echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 1" >>$(obj)include/config.h |
| @[ -z "$(findstring EVB_HI,$@)" ] || \ |
| echo "#define CONFIG_PPCHAMELEON_MODULE_MODEL 2" >>$(obj)include/config.h |
| @[ -z "$(findstring _25,$@)" ] || \ |
| echo "#define CONFIG_PPCHAMELEON_CLK_25" >>$(obj)include/config.h |
| @[ -z "$(findstring _33,$@)" ] || \ |
| echo "#define CONFIG_PPCHAMELEON_CLK_33" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a PPChameleonEVB powerpc ppc4xx PPChameleonEVB dave |
| |
| sequoia_config \ |
| rainier_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc |
| |
| sequoia_nand_config \ |
| rainier_nand_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/sequoia |
| @mkdir -p $(obj)nand_spl/board/amcc/sequoia |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc |
| |
| sequoia_ramboot_config \ |
| rainier_ramboot_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/amcc/sequoia |
| @echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h |
| @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp |
| @echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \ |
| $(obj)board/amcc/sequoia/config.tmp |
| @$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc |
| |
| v5fx30teval_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ |
| > $(obj)board/avnet/v5fx30teval/config.tmp |
| @echo "TEXT_BASE := 0x03000000" \ |
| >> $(obj)board/avnet/v5fx30teval/config.tmp |
| @$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet |
| |
| v5fx30teval_flash_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ |
| > $(obj)board/avnet/v5fx30teval/config.tmp |
| @echo "TEXT_BASE := 0xFF1C0000" \ |
| >> $(obj)board/avnet/v5fx30teval/config.tmp |
| @$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet |
| |
| W7OLMC_config \ |
| W7OLMG_config: unconfig |
| @$(MKCONFIG) $@ powerpc ppc4xx w7o |
| |
| # Walnut & Sycamore images are identical (recognized via PVR) |
| walnut_config \ |
| sycamore_config: unconfig |
| @$(MKCONFIG) -n $@ walnut powerpc ppc4xx walnut amcc |
| |
| xilinx-ppc405-generic_flash_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\ |
| > $(obj)board/xilinx/ppc405-generic/config.tmp |
| @echo "TEXT_BASE := 0xFE360000" \ |
| >> $(obj)board/xilinx/ppc405-generic/config.tmp |
| @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx |
| |
| xilinx-ppc405-generic_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\ |
| > $(obj)board/xilinx/ppc405-generic/config.tmp |
| @echo "TEXT_BASE := 0x04000000" \ |
| >> $(obj)board/xilinx/ppc405-generic/config.tmp |
| @$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx |
| |
| xilinx-ppc440-generic_flash_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\ |
| > $(obj)board/xilinx/ppc440-generic/config.tmp |
| @echo "TEXT_BASE := 0xFE360000" \ |
| >> $(obj)board/xilinx/ppc440-generic/config.tmp |
| @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx |
| |
| xilinx-ppc440-generic_config: unconfig |
| @mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic |
| @echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\ |
| > $(obj)board/xilinx/ppc440-generic/config.tmp |
| @echo "TEXT_BASE := 0x04000000" \ |
| >> $(obj)board/xilinx/ppc440-generic/config.tmp |
| @$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx |
| |
| yosemite_config \ |
| yellowstone_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \ |
| tr '[:lower:]' '[:upper:]')" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a yosemite powerpc ppc4xx yosemite amcc |
| |
| ######################################################################### |
| ## MPC824x Systems |
| ######################################################################### |
| |
| eXalion_config: unconfig |
| @$(MKCONFIG) $(@:_config=) powerpc mpc824x eXalion |
| |
| CPC45_config \ |
| CPC45_ROMBOOT_config: unconfig |
| @mkdir -p $(obj)include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; |
| @$(MKCONFIG) -n $@ CPC45 powerpc mpc824x cpc45 |
| |
| # HDLAN is broken ATM. Should be fixed as soon as hardware is available and as |
| # time permits. |
| #linkstation_HDLAN_config \ |
| # Remove this line when HDLAN is fixed |
| linkstation_HGLAN_config: unconfig |
| @mkdir -p $(obj)include |
| @case $@ in \ |
| *HGLAN*) echo "#define CONFIG_HGLAN 1" >$(obj)include/config.h; ;; \ |
| *HDLAN*) echo "#define CONFIG_HLAN 1" >$(obj)include/config.h; ;; \ |
| esac |
| @$(MKCONFIG) -n $@ -a linkstation powerpc mpc824x linkstation |
| |
| Sandpoint8240_config: unconfig |
| @$(MKCONFIG) $@ powerpc mpc824x sandpoint |
| |
| Sandpoint8245_config: unconfig |
| @$(MKCONFIG) $@ powerpc mpc824x sandpoint |
| |
| ######################################################################### |
| ## MPC8260 Systems |
| ######################################################################### |
| |
| cogent_mpc8260_config: unconfig |
| @$(MKCONFIG) $(@:_config=) powerpc mpc8260 cogent |
| |
| CPU86_config \ |
| CPU86_ROMBOOT_config: unconfig |
| @mkdir -p $(obj)include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; |
| @$(MKCONFIG) -n $@ CPU86 powerpc mpc8260 cpu86 |
| |
| CPU87_config \ |
| CPU87_ROMBOOT_config: unconfig |
| @mkdir -p $(obj)include ; \ |
| if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "CONFIG_BOOT_ROM = y" >> $(obj)include/config.mk ; \ |
| else \ |
| echo "CONFIG_BOOT_ROM = n" >> $(obj)include/config.mk ; \ |
| fi; \ |
| echo "export CONFIG_BOOT_ROM" >> $(obj)include/config.mk; |
| @$(MKCONFIG) -n $@ CPU87 powerpc mpc8260 cpu87 |
| |
| ep8248_config \ |
| ep8248E_config : unconfig |
| @$(MKCONFIG) -n $@ ep8248 powerpc mpc8260 ep8248 |
| |
| ISPAN_config \ |
| ISPAN_REVB_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _REVB_,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_REV_B" > $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a ISPAN powerpc mpc8260 ispan |
| |
| MPC8260ADS_config \ |
| MPC8260ADS_lowboot_config \ |
| MPC8260ADS_33MHz_config \ |
| MPC8260ADS_33MHz_lowboot_config \ |
| MPC8260ADS_40MHz_config \ |
| MPC8260ADS_40MHz_lowboot_config \ |
| MPC8272ADS_config \ |
| MPC8272ADS_lowboot_config \ |
| PQ2FADS_config \ |
| PQ2FADS_lowboot_config \ |
| PQ2FADS-VR_config \ |
| PQ2FADS-VR_lowboot_config \ |
| PQ2FADS-ZU_config \ |
| PQ2FADS-ZU_lowboot_config \ |
| PQ2FADS-ZU_66MHz_config \ |
| PQ2FADS-ZU_66MHz_lowboot_config \ |
| : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/freescale/mpc8260ads |
| $(if $(findstring PQ2FADS,$@), \ |
| @echo "#define CONFIG_ADSTYPE CONFIG_SYS_PQ2FADS" > $(obj)include/config.h, \ |
| @echo "#define CONFIG_ADSTYPE CONFIG_SYS_"$(subst MPC,,$(word 1,$(subst _, ,$@))) > $(obj)include/config.h) |
| $(if $(findstring MHz,$@), \ |
| @echo "#define CONFIG_8260_CLKIN" $(subst MHz,,$(word 2,$(subst _, ,$@)))"000000" >> $(obj)include/config.h, \ |
| $(if $(findstring VR,$@), \ |
| @echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h)) |
| @[ -z "$(findstring lowboot_,$@)" ] || \ |
| echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp |
| @$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale |
| |
| muas3001_dev_config \ |
| muas3001_config : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/muas3001 |
| @if [ "$(findstring dev,$@)" ] ; then \ |
| echo "#define CONFIG_MUAS_DEV_BOARD" > $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a muas3001 powerpc mpc8260 muas3001 |
| |
| # PM825/PM826 default configuration: small (= 8 MB) Flash / boot from 64-bit flash |
| PM825_config \ |
| PM825_ROMBOOT_config \ |
| PM825_BIGFLASH_config \ |
| PM825_ROMBOOT_BIGFLASH_config \ |
| PM826_config \ |
| PM826_ROMBOOT_config \ |
| PM826_BIGFLASH_config \ |
| PM826_ROMBOOT_BIGFLASH_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/pm826 |
| @if [ "$(findstring PM825_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >$(obj)include/config.h ; \ |
| else \ |
| >$(obj)include/config.h ; \ |
| fi |
| @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ |
| if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ |
| echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ |
| fi; \ |
| else \ |
| if [ "$(findstring _BIGFLASH_,$@)" ] ; then \ |
| $(XECHO) "... with 32 MB Flash" ; \ |
| echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \ |
| else \ |
| echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \ |
| fi; \ |
| fi |
| @$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826 |
| |
| PM828_config \ |
| PM828_PCI_config \ |
| PM828_ROMBOOT_config \ |
| PM828_ROMBOOT_PCI_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/pm826 |
| @if [ "$(findstring _PCI_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| fi |
| @if [ "$(findstring _ROMBOOT_,$@)" ] ; then \ |
| echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828 |
| |
| Rattler8248_config \ |
| Rattler_config: unconfig |
| @mkdir -p $(obj)include |
| $(if $(findstring 8248,$@), \ |
| @echo "#define CONFIG_MPC8248" > $(obj)include/config.h) |
| @$(MKCONFIG) -n $@ -a Rattler powerpc mpc8260 rattler |
| |
| TQM8255_AA_config \ |
| TQM8260_AA_config \ |
| TQM8260_AB_config \ |
| TQM8260_AC_config \ |
| TQM8260_AD_config \ |
| TQM8260_AE_config \ |
| TQM8260_AF_config \ |
| TQM8260_AG_config \ |
| TQM8260_AH_config \ |
| TQM8260_AI_config \ |
| TQM8265_AA_config: unconfig |
| @mkdir -p $(obj)include |
| @case "$@" in \ |
| TQM8255_AA_config) CTYPE=MPC8255; CFREQ=300; CACHE=no; BMODE=8260;; \ |
| TQM8260_AA_config) CTYPE=MPC8260; CFREQ=200; CACHE=no; BMODE=8260;; \ |
| TQM8260_AB_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ |
| TQM8260_AC_config) CTYPE=MPC8260; CFREQ=200; CACHE=yes; BMODE=60x;; \ |
| TQM8260_AD_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| TQM8260_AE_config) CTYPE=MPC8260; CFREQ=266; CACHE=no; BMODE=8260;; \ |
| TQM8260_AF_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| TQM8260_AG_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=8260;; \ |
| TQM8260_AH_config) CTYPE=MPC8260; CFREQ=300; CACHE=yes; BMODE=60x;; \ |
| TQM8260_AI_config) CTYPE=MPC8260; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| TQM8265_AA_config) CTYPE=MPC8265; CFREQ=300; CACHE=no; BMODE=60x;; \ |
| esac; \ |
| if [ "$${CTYPE}" != "MPC8260" ] ; then \ |
| echo "#define CONFIG_$${CTYPE}" >>$(obj)include/config.h ; \ |
| fi; \ |
| echo "#define CONFIG_$${CFREQ}MHz" >>$(obj)include/config.h ; \ |
| if [ "$${CACHE}" = "yes" ] ; then \ |
| echo "#define CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#undef CONFIG_L2_CACHE" >>$(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${BMODE}" = "60x" ] ; then \ |
| echo "#define CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#undef CONFIG_BUSMODE_60x" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a TQM8260 powerpc mpc8260 tqm8260 tqc |
| |
| VoVPN-GW_66MHz_config \ |
| VoVPN-GW_100MHz_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_CLKIN_$(word 2,$(subst _, ,$@))" > $(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a VoVPN-GW powerpc mpc8260 vovpn-gw funkwerk |
| |
| ######################################################################### |
| ## Coldfire |
| ######################################################################### |
| |
| astro_mcf5373l_config \ |
| astro_mcf5373l_RAM_config : unconfig |
| @$(MKCONFIG) -n $@ -t $@ astro_mcf5373l m68k mcf532x mcf5373l astro |
| |
| M52277EVB_config \ |
| M52277EVB_spansion_config \ |
| M52277EVB_stmicro_config : unconfig |
| @case "$@" in \ |
| M52277EVB_config) FLASH=SPANSION;; \ |
| M52277EVB_spansion_config) FLASH=SPANSION;; \ |
| M52277EVB_stmicro_config) FLASH=STMICRO;; \ |
| esac; \ |
| if [ "$${FLASH}" = "SPANSION" ] ; then \ |
| echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \ |
| cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \ |
| fi; \ |
| if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \ |
| cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale |
| |
| M5235EVB_config \ |
| M5235EVB_Flash16_config \ |
| M5235EVB_Flash32_config: unconfig |
| @case "$@" in \ |
| M5235EVB_config) FLASH=16;; \ |
| M5235EVB_Flash16_config) FLASH=16;; \ |
| M5235EVB_Flash32_config) FLASH=32;; \ |
| esac; \ |
| if [ "$${FLASH}" != "16" ] ; then \ |
| echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ |
| cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \ |
| else \ |
| echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \ |
| cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale |
| |
| cobra5272_config : unconfig |
| @$(MKCONFIG) $@ m68k mcf52x2 cobra5272 |
| |
| EB+MCF-EV123_config : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/BuS/EB+MCF-EV123 |
| @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk |
| @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS |
| |
| EB+MCF-EV123_internal_config : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/BuS/EB+MCF-EV123 |
| @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk |
| @$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS |
| |
| M5329AFEE_config \ |
| M5329BFEE_config : unconfig |
| @case "$@" in \ |
| M5329AFEE_config) NAND=0;; \ |
| M5329BFEE_config) NAND=16;; \ |
| esac; \ |
| if [ "$${NAND}" != "0" ] ; then \ |
| echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a M5329EVB m68k mcf532x m5329evb freescale |
| |
| M5373EVB_config : unconfig |
| @case "$@" in \ |
| M5373EVB_config) NAND=16;; \ |
| esac; \ |
| if [ "$${NAND}" != "0" ] ; then \ |
| echo "#define NANDFLASH_SIZE $${NAND}" > $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -a M5373EVB m68k mcf532x m5373evb freescale |
| |
| M54451EVB_config \ |
| M54451EVB_stmicro_config : unconfig |
| @case "$@" in \ |
| M54451EVB_config) FLASH=NOR;; \ |
| M54451EVB_stmicro_config) FLASH=STMICRO;; \ |
| esac; \ |
| if [ "$${FLASH}" = "NOR" ] ; then \ |
| echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \ |
| fi; \ |
| if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \ |
| fi; \ |
| echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ; |
| @$(MKCONFIG) -n $@ -a M54451EVB m68k mcf5445x m54451evb freescale |
| |
| M54455EVB_config \ |
| M54455EVB_atmel_config \ |
| M54455EVB_intel_config \ |
| M54455EVB_a33_config \ |
| M54455EVB_a66_config \ |
| M54455EVB_i33_config \ |
| M54455EVB_i66_config \ |
| M54455EVB_stm33_config : unconfig |
| @case "$@" in \ |
| M54455EVB_config) FLASH=ATMEL; FREQ=33333333;; \ |
| M54455EVB_atmel_config) FLASH=ATMEL; FREQ=33333333;; \ |
| M54455EVB_intel_config) FLASH=INTEL; FREQ=33333333;; \ |
| M54455EVB_a33_config) FLASH=ATMEL; FREQ=33333333;; \ |
| M54455EVB_a66_config) FLASH=ATMEL; FREQ=66666666;; \ |
| M54455EVB_i33_config) FLASH=INTEL; FREQ=33333333;; \ |
| M54455EVB_i66_config) FLASH=INTEL; FREQ=66666666;; \ |
| M54455EVB_stm33_config) FLASH=STMICRO; FREQ=33333333;; \ |
| esac; \ |
| if [ "$${FLASH}" = "INTEL" ] ; then \ |
| echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| fi; \ |
| if [ "$${FLASH}" = "ATMEL" ] ; then \ |
| echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| fi; \ |
| if [ "$${FLASH}" = "STMICRO" ] ; then \ |
| echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \ |
| cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \ |
| fi; \ |
| echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \ |
| @$(MKCONFIG) -n $@ -a M54455EVB m68k mcf5445x m54455evb freescale |
| |
| M5475AFE_config \ |
| M5475BFE_config \ |
| M5475CFE_config \ |
| M5475DFE_config \ |
| M5475EFE_config \ |
| M5475FFE_config \ |
| M5475GFE_config : unconfig |
| @case "$@" in \ |
| M5475AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5475BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5475CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5475DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ |
| M5475EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5475FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ |
| M5475GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| esac; \ |
| echo "#define CONFIG_SYS_BUSCLK 133333333" > $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ |
| if [ "$${RAM1}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${CODE}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${VID}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${USB}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a M5475EVB m68k mcf547x_8x m547xevb freescale |
| |
| M5485AFE_config \ |
| M5485BFE_config \ |
| M5485CFE_config \ |
| M5485DFE_config \ |
| M5485EFE_config \ |
| M5485FFE_config \ |
| M5485GFE_config \ |
| M5485HFE_config : unconfig |
| @case "$@" in \ |
| M5485AFE_config) BOOT=2;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5485BFE_config) BOOT=2;CODE=16;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5485CFE_config) BOOT=2;CODE=16;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5485DFE_config) BOOT=2;CODE=0;VID=0;USB=1;RAM=64;RAM1=0;; \ |
| M5485EFE_config) BOOT=2;CODE=0;VID=1;USB=1;RAM=64;RAM1=0;; \ |
| M5485FFE_config) BOOT=2;CODE=32;VID=1;USB=1;RAM=64;RAM1=64;; \ |
| M5485GFE_config) BOOT=4;CODE=0;VID=0;USB=0;RAM=64;RAM1=0;; \ |
| M5485HFE_config) BOOT=2;CODE=16;VID=1;USB=0;RAM=64;RAM1=0;; \ |
| esac; \ |
| echo "#define CONFIG_SYS_BUSCLK 100000000" > $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_BOOTSZ $${BOOT}" >> $(obj)include/config.h ; \ |
| echo "#define CONFIG_SYS_DRAMSZ $${RAM}" >> $(obj)include/config.h ; \ |
| if [ "$${RAM1}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_DRAMSZ1 $${RAM1}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${CODE}" != "0" ] ; then \ |
| echo "#define CONFIG_SYS_NOR1SZ $${CODE}" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${VID}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_VIDEO" >> $(obj)include/config.h ; \ |
| fi; \ |
| if [ "$${USB}" == "1" ] ; then \ |
| echo "#define CONFIG_SYS_USBCTRL" >> $(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a M5485EVB m68k mcf547x_8x m548xevb freescale |
| |
| ######################################################################### |
| ## MPC83xx Systems |
| ######################################################################### |
| |
| MPC8313ERDB_33_config \ |
| MPC8313ERDB_66_config \ |
| MPC8313ERDB_NAND_33_config \ |
| MPC8313ERDB_NAND_66_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/freescale/mpc8313erdb |
| @if [ "$(findstring _33_,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_33MHZ" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _66_,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _NAND_,$@)" ] ; then \ |
| echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \ |
| echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \ |
| fi ; |
| @if [ "$(findstring _NAND_,$@)" ] ; then \ |
| echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk ; \ |
| fi ; |
| @$(MKCONFIG) -n $@ -a MPC8313ERDB powerpc mpc83xx mpc8313erdb freescale |
| |
| MPC8315ERDB_NAND_config \ |
| MPC8315ERDB_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ MPC8315ERDB powerpc mpc83xx mpc8315erdb freescale |
| |
| MPC832XEMDS_config \ |
| MPC832XEMDS_HOST_33_config \ |
| MPC832XEMDS_HOST_66_config \ |
| MPC832XEMDS_SLAVE_config \ |
| MPC832XEMDS_ATM_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _HOST_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _SLAVE_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _33_,$@)" ] ; then \ |
| echo "#define PCI_33M" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _66_,$@)" ] ; then \ |
| echo "#define PCI_66M" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _ATM_,$@)" ] ; then \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ |
| fi ; |
| @$(MKCONFIG) -n $@ -a MPC832XEMDS powerpc mpc83xx mpc832xemds freescale |
| |
| MPC8349ITX_config \ |
| MPC8349ITX_LOWBOOT_config \ |
| MPC8349ITXGP_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/freescale/mpc8349itx |
| @echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h |
| @if [ "$(findstring GP,$@)" ] ; then \ |
| echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ |
| fi |
| @if [ "$(findstring LOWBOOT,$@)" ] ; then \ |
| echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale |
| |
| MPC8360EMDS_config \ |
| MPC8360EMDS_HOST_33_config \ |
| MPC8360EMDS_HOST_66_config \ |
| MPC8360EMDS_SLAVE_config \ |
| MPC8360EMDS_ATM_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _HOST_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _SLAVE_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PCISLAVE" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _33_,$@)" ] ; then \ |
| echo "#define PCI_33M" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _66_,$@)" ] ; then \ |
| echo "#define PCI_66M" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _ATM_,$@)" ] ; then \ |
| echo "#define CONFIG_PQ_MDS_PIB 1" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_PQ_MDS_PIB_ATM 1" >>$(obj)include/config.h ; \ |
| fi ; |
| @$(MKCONFIG) -n $@ -a MPC8360EMDS powerpc mpc83xx mpc8360emds freescale |
| |
| MPC8360ERDK_33_config \ |
| MPC8360ERDK_66_config \ |
| MPC8360ERDK_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _33_,$@)" ] ; then \ |
| echo "#define CONFIG_CLKIN_33MHZ" >>$(obj)include/config.h ;\ |
| fi ; |
| @$(MKCONFIG) -n $@ -a MPC8360ERDK powerpc mpc83xx mpc8360erdk freescale |
| |
| MPC837XEMDS_config \ |
| MPC837XEMDS_HOST_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _HOST_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI" >>$(obj)include/config.h ; \ |
| fi ; |
| @$(MKCONFIG) -n $@ -a MPC837XEMDS powerpc mpc83xx mpc837xemds freescale |
| |
| sbc8349_config \ |
| sbc8349_PCI_33_config \ |
| sbc8349_PCI_66_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ sbc8349 powerpc mpc83xx sbc8349 |
| |
| SIMPC8313_LP_config \ |
| SIMPC8313_SP_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/sheldon/simpc8313 |
| @if [ "$(findstring _LP_,$@)" ] ; then \ |
| echo "#define CONFIG_NAND_LP" >> $(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _SP_,$@)" ] ; then \ |
| echo "#define CONFIG_NAND_SP" >> $(obj)include/config.h ; \ |
| fi ; |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| @$(MKCONFIG) -n $@ -a SIMPC8313 powerpc mpc83xx simpc8313 sheldon |
| |
| caddy2_config \ |
| vme8349_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ vme8349 powerpc mpc83xx vme8349 esd |
| |
| ######################################################################### |
| ## MPC85xx Systems |
| ######################################################################### |
| |
| MPC8536DS_NAND_config \ |
| MPC8536DS_SDCARD_config \ |
| MPC8536DS_SPIFLASH_config \ |
| MPC8536DS_36BIT_config \ |
| MPC8536DS_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ MPC8536DS powerpc mpc85xx mpc8536ds freescale |
| |
| MPC8540EVAL_config \ |
| MPC8540EVAL_33_config \ |
| MPC8540EVAL_66_config \ |
| MPC8540EVAL_33_slave_config \ |
| MPC8540EVAL_66_slave_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ -z "$(findstring _33_,$@)" ] ; then \ |
| echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \ |
| fi ; \ |
| if [ "$(findstring _slave_,$@)" ] ; then \ |
| echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a MPC8540EVAL powerpc mpc85xx mpc8540eval |
| |
| MPC8541CDS_legacy_config \ |
| MPC8541CDS_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _legacy_,$@)" ] ; then \ |
| echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a MPC8541CDS powerpc mpc85xx mpc8541cds freescale |
| |
| MPC8548CDS_legacy_config \ |
| MPC8548CDS_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _legacy_,$@)" ] ; then \ |
| echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a MPC8548CDS powerpc mpc85xx mpc8548cds freescale |
| |
| MPC8555CDS_legacy_config \ |
| MPC8555CDS_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _legacy_,$@)" ] ; then \ |
| echo "#define CONFIG_LEGACY" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a MPC8555CDS powerpc mpc85xx mpc8555cds freescale |
| |
| MPC8569MDS_ATM_config \ |
| MPC8569MDS_NAND_config \ |
| MPC8569MDS_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ MPC8569MDS powerpc mpc85xx mpc8569mds freescale |
| |
| MPC8572DS_36BIT_config \ |
| MPC8572DS_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ MPC8572DS powerpc mpc85xx mpc8572ds freescale |
| |
| P2020DS_36BIT_config \ |
| P2020DS_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ P2020DS powerpc mpc85xx p2020ds freescale |
| |
| P1011RDB_config \ |
| P1011RDB_NAND_config \ |
| P1011RDB_SDCARD_config \ |
| P1011RDB_SPIFLASH_config \ |
| P1020RDB_config \ |
| P1020RDB_NAND_config \ |
| P1020RDB_SDCARD_config \ |
| P1020RDB_SPIFLASH_config \ |
| P2010RDB_config \ |
| P2010RDB_NAND_config \ |
| P2010RDB_SDCARD_config \ |
| P2010RDB_SPIFLASH_config \ |
| P2020RDB_config \ |
| P2020RDB_NAND_config \ |
| P2020RDB_SDCARD_config \ |
| P2020RDB_SPIFLASH_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ P1_P2_RDB powerpc mpc85xx p1_p2_rdb freescale |
| |
| sbc8540_config \ |
| sbc8540_33_config \ |
| sbc8540_66_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ SBC8540 powerpc mpc85xx sbc8560 |
| |
| sbc8548_config \ |
| sbc8548_PCI_33_config \ |
| sbc8548_PCI_66_config \ |
| sbc8548_PCI_33_PCIE_config \ |
| sbc8548_PCI_66_PCIE_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ sbc8548 powerpc mpc85xx sbc8548 |
| |
| sbc8560_config \ |
| sbc8560_33_config \ |
| sbc8560_66_config: unconfig |
| @$(MKCONFIG) -n $@ -t $@ sbc8560 powerpc mpc85xx sbc8560 |
| |
| stxssa_config \ |
| stxssa_4M_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _4M_,$@)" ] ; then \ |
| echo "#define CONFIG_STXSSA_4M" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a stxssa powerpc mpc85xx stxssa stx |
| |
| TQM8540_config \ |
| TQM8541_config \ |
| TQM8548_config \ |
| TQM8548_AG_config \ |
| TQM8548_BE_config \ |
| TQM8555_config \ |
| TQM8560_config: unconfig |
| @mkdir -p $(obj)include |
| @BTYPE=$(@:_config=); \ |
| CTYPE=$(subst TQM,,$(subst _AG,,$(subst _BE,,$(@:_config=)))); \ |
| echo "#define CONFIG_MPC$${CTYPE}">>$(obj)include/config.h; \ |
| echo "#define CONFIG_$${BTYPE}">>$(obj)include/config.h; \ |
| echo "#define CONFIG_HOSTNAME tqm$${CTYPE}">>$(obj)include/config.h; \ |
| echo "#define CONFIG_BOARDNAME \"$${BTYPE}\"">>$(obj)include/config.h; |
| @echo "CONFIG_$(@:_config=) = y">>$(obj)include/config.mk; |
| @$(MKCONFIG) -n $@ -a TQM85xx powerpc mpc85xx tqm85xx tqc |
| |
| ######################################################################### |
| ## MPC86xx Systems |
| ######################################################################### |
| |
| MPC8641HPCN_36BIT_config \ |
| MPC8641HPCN_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _36BIT_,$@)" ] ; then \ |
| echo "#define CONFIG_PHYS_64BIT" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a MPC8641HPCN powerpc mpc86xx mpc8641hpcn freescale |
| |
| ######################################################################### |
| ## 74xx/7xx Systems |
| ######################################################################### |
| |
| EVB64260_config \ |
| EVB64260_750CX_config: unconfig |
| @$(MKCONFIG) -n $@ EVB64260 powerpc 74xx_7xx evb64260 |
| |
| p3m750_config \ |
| p3m7448_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring 750_,$@)" ] ; then \ |
| echo "#define CONFIG_P3M750" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_P3M7448" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a p3mx powerpc 74xx_7xx p3mx prodrive |
| |
| PCIPPC2_config \ |
| PCIPPC6_config: unconfig |
| @$(MKCONFIG) -n $@ $@ powerpc 74xx_7xx pcippc2 |
| |
| #======================================================================== |
| # ARM |
| #======================================================================== |
| |
| ######################################################################### |
| ## Atmel AT91RM9200 Systems |
| ######################################################################### |
| |
| CPUAT91_RAM_config \ |
| CPUAT91_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a cpuat91 arm arm920t cpuat91 eukrea at91rm9200 |
| |
| ######################################################################### |
| ## ARM926EJ-S Systems |
| ######################################################################### |
| |
| at91sam9260ek_nandflash_config \ |
| at91sam9260ek_dataflash_cs0_config \ |
| at91sam9260ek_dataflash_cs1_config \ |
| at91sam9260ek_config \ |
| at91sam9g20ek_nandflash_config \ |
| at91sam9g20ek_dataflash_cs0_config \ |
| at91sam9g20ek_dataflash_cs1_config \ |
| at91sam9g20ek_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring 9g20,$@)" ] ; then \ |
| echo "#define CONFIG_AT91SAM9G20EK 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_AT91SAM9260EK 1" >>$(obj)include/config.h ; \ |
| fi; |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 |
| |
| at91sam9xeek_nandflash_config \ |
| at91sam9xeek_dataflash_cs0_config \ |
| at91sam9xeek_dataflash_cs1_config \ |
| at91sam9xeek_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS1 1" >>$(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a at91sam9260ek arm arm926ejs at91sam9260ek atmel at91 |
| |
| at91sam9261ek_nandflash_config \ |
| at91sam9261ek_dataflash_cs0_config \ |
| at91sam9261ek_dataflash_cs3_config \ |
| at91sam9261ek_config \ |
| at91sam9g10ek_nandflash_config \ |
| at91sam9g10ek_dataflash_cs0_config \ |
| at91sam9g10ek_dataflash_cs3_config \ |
| at91sam9g10ek_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring 9g10,$@)" ] ; then \ |
| echo "#define CONFIG_AT91SAM9G10EK 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_AT91SAM9261EK 1" >>$(obj)include/config.h ; \ |
| fi; |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| elif [ "$(findstring dataflash_cs0,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS3 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH_CS0 1" >>$(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a at91sam9261ek arm arm926ejs at91sam9261ek atmel at91 |
| |
| at91sam9263ek_norflash_config \ |
| at91sam9263ek_norflash_boot_config \ |
| at91sam9263ek_nandflash_config \ |
| at91sam9263ek_dataflash_config \ |
| at91sam9263ek_dataflash_cs0_config \ |
| at91sam9263ek_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| elif [ "$(findstring norflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NORFLASH 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ |
| fi; |
| @if [ "$(findstring norflash_boot,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_BOOT_NORFLASH 1" >>$(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a at91sam9263ek arm arm926ejs at91sam9263ek atmel at91 |
| |
| at91sam9rlek_nandflash_config \ |
| at91sam9rlek_dataflash_config \ |
| at91sam9rlek_dataflash_cs0_config \ |
| at91sam9rlek_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_SYS_USE_DATAFLASH 1" >>$(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a at91sam9rlek arm arm926ejs at91sam9rlek atmel at91 |
| |
| CPU9G20_128M_config \ |
| CPU9G20_config \ |
| CPU9260_128M_config \ |
| CPU9260_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a cpu9260 arm arm926ejs cpu9260 eukrea at91 |
| |
| at91sam9m10g45ek_nandflash_config \ |
| at91sam9m10g45ek_dataflash_config \ |
| at91sam9m10g45ek_dataflash_cs0_config \ |
| at91sam9m10g45ek_config \ |
| at91sam9g45ekes_nandflash_config \ |
| at91sam9g45ekes_dataflash_config \ |
| at91sam9g45ekes_dataflash_cs0_config \ |
| at91sam9g45ekes_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring 9m10,$@)" ] ; then \ |
| echo "#define CONFIG_AT91SAM9M10G45EK 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_AT91SAM9G45EKES 1" >>$(obj)include/config.h ; \ |
| fi; |
| @if [ "$(findstring _nandflash,$@)" ] ; then \ |
| echo "#define CONFIG_SYS_USE_NANDFLASH 1" >>$(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_ATMEL_SPI 1" >>$(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a at91sam9m10g45ek arm arm926ejs at91sam9m10g45ek atmel at91 |
| |
| pm9g45_config : unconfig |
| @mkdir -p $(obj)include |
| @$(MKCONFIG) -a pm9g45 arm arm926ejs pm9g45 ronetix at91 |
| |
| SBC35_A9G20_NANDFLASH_config \ |
| SBC35_A9G20_EEPROM_config \ |
| SBC35_A9G20_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a sbc35_a9g20 arm arm926ejs sbc35_a9g20 calao at91 |
| |
| TNY_A9G20_NANDFLASH_config \ |
| TNY_A9G20_EEPROM_config \ |
| TNY_A9G20_config \ |
| TNY_A9260_NANDFLASH_config \ |
| TNY_A9260_EEPROM_config \ |
| TNY_A9260_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_$(@:_config=) 1" >$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a tny_a9260 arm arm926ejs tny_a9260 calao at91 |
| |
| ######################################################################## |
| ## ARM Integrator boards - see doc/README-integrator for more info. |
| integratorap_config \ |
| ap_config \ |
| ap966_config \ |
| ap922_config \ |
| ap922_XA10_config \ |
| ap7_config \ |
| ap720t_config \ |
| ap920t_config \ |
| ap926ejs_config \ |
| ap946es_config: unconfig |
| @board/armltd/integrator/split_by_variant.sh ap $@ |
| |
| integratorcp_config \ |
| cp_config \ |
| cp920t_config \ |
| cp926ejs_config \ |
| cp946es_config \ |
| cp1136_config \ |
| cp966_config \ |
| cp922_config \ |
| cp922_XA10_config \ |
| cp1026_config: unconfig |
| @board/armltd/integrator/split_by_variant.sh cp $@ |
| |
| nhk8815_config \ |
| nhk8815_onenand_config: unconfig |
| @mkdir -p $(obj)include |
| @ > $(obj)include/config.h |
| @if [ "$(findstring _onenand, $@)" ] ; then \ |
| echo "#define CONFIG_BOOT_ONENAND" >> $(obj)include/config.h; \ |
| fi |
| @$(MKCONFIG) -n $@ -a nhk8815 arm arm926ejs nhk8815 st nomadik |
| |
| xtract_omap1610xxx = $(subst _cs0boot,,$(subst _cs3boot,,$(subst _cs_autoboot,,$(subst _config,,$1)))) |
| |
| omap1610inn_config \ |
| omap1610inn_cs0boot_config \ |
| omap1610inn_cs3boot_config \ |
| omap1610inn_cs_autoboot_config \ |
| omap1610h2_config \ |
| omap1610h2_cs0boot_config \ |
| omap1610h2_cs3boot_config \ |
| omap1610h2_cs_autoboot_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _cs0boot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS0_BOOT" >> .$(obj)include/config.h ; \ |
| elif [ "$(findstring _cs_autoboot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS_AUTOBOOT" >> $(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a $(call xtract_omap1610xxx,$@) arm arm926ejs omap1610inn ti omap |
| |
| omap730p2_config \ |
| omap730p2_cs0boot_config \ |
| omap730p2_cs3boot_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _cs0boot_, $@)" ] ; then \ |
| echo "#define CONFIG_CS0_BOOT" >> $(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_CS3_BOOT" >> $(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a omap730p2 arm arm926ejs omap730p2 ti omap |
| |
| spear300_config \ |
| spear310_config \ |
| spear320_config : unconfig |
| @$(MKCONFIG) -n $@ -t $@ spear3xx arm arm926ejs $(@:_config=) spear spear |
| |
| spear600_config : unconfig |
| @$(MKCONFIG) -n $@ -t $@ spear6xx arm arm926ejs $(@:_config=) spear spear |
| |
| SX1_stdout_serial_config \ |
| SX1_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring _stdout_serial_, $@)" ] ; then \ |
| echo "#undef CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ |
| else \ |
| echo "#define CONFIG_STDOUT_USBTTY" >> $(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ SX1 arm arm925t sx1 |
| |
| # TRAB default configuration: 8 MB Flash, 32 MB RAM |
| trab_config \ |
| trab_bigram_config \ |
| trab_bigflash_config \ |
| trab_old_config: unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/trab |
| @[ -z "$(findstring _bigram,$@)" ] || \ |
| { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_RAM_32MB" >>$(obj)include/config.h ; \ |
| } |
| @[ -z "$(findstring _bigflash,$@)" ] || \ |
| { echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ |
| } |
| @[ -z "$(findstring _old,$@)" ] || \ |
| { echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \ |
| echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \ |
| } |
| @$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0 |
| |
| tx25_config : unconfig |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| @$(MKCONFIG) $@ arm arm926ejs tx25 karo mx25 |
| |
| edb9301_config \ |
| edb9302_config \ |
| edb9302a_config \ |
| edb9307_config \ |
| edb9307a_config \ |
| edb9312_config \ |
| edb9315_config \ |
| edb9315a_config: unconfig |
| @$(MKCONFIG) -n $@ -t $(@:_config=) edb93xx arm arm920t edb93xx - ep93xx |
| |
| ######################################################################### |
| # ARM supplied Versatile development boards |
| ######################################################################### |
| |
| versatile_config \ |
| versatileab_config \ |
| versatilepb_config : unconfig |
| @board/armltd/versatile/split_by_variant.sh $@ |
| |
| ######################################################################### |
| ## XScale Systems |
| ######################################################################### |
| |
| pdnb3_config \ |
| scpu_config: unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring scpu_,$@)" ] ; then \ |
| echo "#define CONFIG_SCPU" >>$(obj)include/config.h ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a pdnb3 arm ixp pdnb3 prodrive |
| |
| polaris_config \ |
| trizepsiv_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ "$(findstring polaris,$@)" ] ; then \ |
| echo "#define CONFIG_POLARIS 1" >>$(obj)include/config.h ; \ |
| fi; |
| @$(MKCONFIG) -n $@ -a trizepsiv arm pxa trizepsiv |
| |
| ######################################################################### |
| ## ARM1136 Systems |
| ######################################################################### |
| |
| apollon_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_ONENAND_U_BOOT" > $(obj)include/config.h |
| @echo "CONFIG_ONENAND_U_BOOT = y" >> $(obj)include/config.mk |
| @$(MKCONFIG) $@ arm arm1136 apollon - omap24xx |
| |
| imx31_phycore_eet_config \ |
| imx31_phycore_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ -n "$(findstring _eet_,$@)" ]; then \ |
| echo "#define CONFIG_IMX31_PHYCORE_EET" >> $(obj)include/config.h; \ |
| fi |
| @$(MKCONFIG) -n $@ -a imx31_phycore arm arm1136 imx31_phycore - mx31 |
| |
| mx31pdk_config \ |
| mx31pdk_nand_config : unconfig |
| @mkdir -p $(obj)include |
| @if [ -n "$(findstring _nand_,$@)" ]; then \ |
| echo "#define CONFIG_NAND_U_BOOT" >> $(obj)include/config.h; \ |
| else \ |
| echo "#define CONFIG_SKIP_LOWLEVEL_INIT" >> $(obj)include/config.h; \ |
| echo "#define CONFIG_SKIP_RELOCATE_UBOOT" >> $(obj)include/config.h; \ |
| fi |
| @$(MKCONFIG) -n $@ -a mx31pdk arm arm1136 mx31pdk freescale mx31 |
| |
| ######################################################################### |
| ## ARM1176 Systems |
| ######################################################################### |
| smdk6400_noUSB_config \ |
| smdk6400_config : unconfig |
| @mkdir -p $(obj)include $(obj)board/samsung/smdk6400 |
| @mkdir -p $(obj)nand_spl/board/samsung/smdk6400 |
| @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| @if [ -z "$(findstring smdk6400_noUSB_config,$@)" ]; then \ |
| echo "RAM_TEXT = 0x57e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ |
| else \ |
| echo "RAM_TEXT = 0xc7e00000" >> $(obj)board/samsung/smdk6400/config.tmp;\ |
| fi |
| @$(MKCONFIG) smdk6400 arm arm1176 smdk6400 samsung s3c64xx |
| @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk |
| |
| #======================================================================== |
| # MIPS |
| #======================================================================== |
| ######################################################################### |
| ## MIPS32 4Kc |
| ######################################################################### |
| |
| incaip_100MHz_config \ |
| incaip_133MHz_config \ |
| incaip_150MHz_config \ |
| incaip_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _100MHz,$@)" ] || \ |
| echo "#define CPU_CLOCK_RATE 100000000" >>$(obj)include/config.h |
| @[ -z "$(findstring _133MHz,$@)" ] || \ |
| echo "#define CPU_CLOCK_RATE 133000000" >>$(obj)include/config.h |
| @[ -z "$(findstring _150MHz,$@)" ] || \ |
| echo "#define CPU_CLOCK_RATE 150000000" >>$(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a incaip mips mips incaip |
| |
| vct_premium_config \ |
| vct_premium_small_config \ |
| vct_premium_onenand_config \ |
| vct_premium_onenand_small_config \ |
| vct_platinum_config \ |
| vct_platinum_small_config \ |
| vct_platinum_onenand_config \ |
| vct_platinum_onenand_small_config \ |
| vct_platinumavc_config \ |
| vct_platinumavc_small_config \ |
| vct_platinumavc_onenand_config \ |
| vct_platinumavc_onenand_small_config: unconfig |
| @mkdir -p $(obj)include |
| @[ -z "$(findstring _premium,$@)" ] || \ |
| echo "#define CONFIG_VCT_PREMIUM" > $(obj)include/config.h |
| @[ -z "$(findstring _platinum_,$@)" ] || \ |
| echo "#define CONFIG_VCT_PLATINUM" > $(obj)include/config.h |
| @[ -z "$(findstring _platinumavc,$@)" ] || \ |
| echo "#define CONFIG_VCT_PLATINUMAVC" > $(obj)include/config.h |
| @[ -z "$(findstring _onenand,$@)" ] || \ |
| echo "#define CONFIG_VCT_ONENAND" >> $(obj)include/config.h |
| @[ -z "$(findstring _small,$@)" ] || \ |
| echo "#define CONFIG_VCT_SMALL_IMAGE" >> $(obj)include/config.h |
| @$(MKCONFIG) -n $@ -a vct mips mips vct micronas |
| |
| ######################################################################### |
| ## MIPS32 AU1X00 |
| ######################################################################### |
| |
| dbau1000_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_DBAU1000 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1100_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_DBAU1100 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1500_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_DBAU1500 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1550_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| |
| dbau1550_el_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_DBAU1550 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a dbau1x00 mips mips dbau1x00 |
| |
| gth2_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_GTH2 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a $@ mips mips gth2 |
| |
| pb1000_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_PB1000 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a pb1x00 mips mips pb1x00 |
| |
| qemu_mips_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_QEMU_MIPS 1" >$(obj)include/config.h |
| @$(MKCONFIG) -a qemu-mips mips mips qemu-mips |
| |
| #======================================================================== |
| # Nios |
| #======================================================================== |
| |
| ######################################################################### |
| ## Nios-II |
| ######################################################################### |
| |
| # nios2 generic boards |
| NIOS2_GENERIC = nios2-generic |
| |
| $(NIOS2_GENERIC:%=%_config) : unconfig |
| @$(MKCONFIG) $@ nios2 nios2 nios2-generic altera |
| |
| #======================================================================== |
| # Blackfin |
| #======================================================================== |
| |
| bf527-ezkit-v2_config : unconfig |
| @$(MKCONFIG) -t BF527_EZKIT_REV_2_1 \ |
| bf527-ezkit blackfin blackfin bf527-ezkit |
| |
| #======================================================================== |
| # SH3 (SuperH) |
| #======================================================================== |
| |
| ######################################################################### |
| ## sh2 (Renesas SuperH) |
| ######################################################################### |
| rsk7203_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_RSK7203 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh2 rsk7203 renesas |
| |
| ######################################################################### |
| ## sh3 (Renesas SuperH) |
| ######################################################################### |
| |
| mpr2_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MPR2 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh3 mpr2 |
| |
| ms7720se_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MS7720SE 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh3 ms7720se |
| |
| ######################################################################### |
| ## sh4 (Renesas SuperH) |
| ######################################################################### |
| |
| MigoR_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MIGO_R 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh4 MigoR renesas |
| |
| ms7750se_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MS7750SE 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh4 ms7750se |
| |
| ms7722se_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_MS7722SE 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh4 ms7722se |
| |
| r2dplus_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_R2DPLUS 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh4 r2dplus renesas |
| |
| r7780mp_config: unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_R7780MP 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh4 r7780mp renesas |
| |
| sh7763rdp_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_SH7763RDP 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh4 sh7763rdp renesas |
| |
| sh7785lcr_32bit_config \ |
| sh7785lcr_config : unconfig |
| @mkdir -p $(obj)include |
| @mkdir -p $(obj)board/renesas/sh7785lcr |
| @echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h |
| @if [ "$(findstring 32bit, $@)" ] ; then \ |
| echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \ |
| echo "TEXT_BASE = 0x8ff80000" > \ |
| $(obj)board/renesas/sh7785lcr/config.tmp ; \ |
| fi |
| @$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas |
| |
| ap325rxa_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_AP325RXA 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh4 ap325rxa renesas |
| |
| espt_config : unconfig |
| @mkdir -p $(obj)include |
| @echo "#define CONFIG_ESPT 1" > $(obj)include/config.h |
| @$(MKCONFIG) -a $@ sh sh4 espt |
| |
| ######################################################################### |
| ######################################################################### |
| |
| clean: |
| @rm -f $(obj)examples/standalone/82559_eeprom \ |
| $(obj)examples/standalone/atmel_df_pow2 \ |
| $(obj)examples/standalone/eepro100_eeprom \ |
| $(obj)examples/standalone/hello_world \ |
| $(obj)examples/standalone/interrupt \ |
| $(obj)examples/standalone/mem_to_mem_idma2intr \ |
| $(obj)examples/standalone/sched \ |
| $(obj)examples/standalone/smc91111_eeprom \ |
| $(obj)examples/standalone/test_burst \ |
| $(obj)examples/standalone/timer |
| @rm -f $(obj)examples/api/demo{,.bin} |
| @rm -f $(obj)tools/bmp_logo $(obj)tools/easylogo/easylogo \ |
| $(obj)tools/env/{fw_printenv,fw_setenv} \ |
| $(obj)tools/envcrc \ |
| $(obj)tools/gdb/{astest,gdbcont,gdbsend} \ |
| $(obj)tools/gen_eth_addr $(obj)tools/img2srec \ |
| $(obj)tools/mkimage $(obj)tools/mpc86x_clk \ |
| $(obj)tools/ncb $(obj)tools/ubsha1 |
| @rm -f $(obj)board/cray/L1/{bootscript.c,bootscript.image} \ |
| $(obj)board/netstar/{eeprom,crcek,crcit,*.srec,*.bin} \ |
| $(obj)board/trab/trab_fkt $(obj)board/voiceblue/eeprom \ |
| $(obj)board/armltd/{integratorap,integratorcp}/u-boot.lds \ |
| $(obj)arch/blackfin/lib/u-boot.lds \ |
| $(obj)u-boot.lds \ |
| $(obj)arch/blackfin/cpu/bootrom-asm-offsets.[chs] |
| @rm -f $(obj)include/bmp_logo.h |
| @rm -f $(obj)nand_spl/{u-boot.lds,u-boot-spl,u-boot-spl.map,System.map} |
| @rm -f $(obj)onenand_ipl/onenand-{ipl,ipl.bin,ipl.map} |
| @rm -f $(ONENAND_BIN) |
| @rm -f $(obj)onenand_ipl/u-boot.lds |
| @rm -f $(TIMESTAMP_FILE) $(VERSION_FILE) |
| @find $(OBJTREE) -type f \ |
| \( -name 'core' -o -name '*.bak' -o -name '*~' \ |
| -o -name '*.o' -o -name '*.a' -o -name '*.exe' \) -print \ |
| | xargs rm -f |
| |
| clobber: clean |
| @find $(OBJTREE) -type f \( -name .depend \ |
| -o -name '*.srec' -o -name '*.bin' -o -name u-boot.img \) \ |
| -print0 \ |
| | xargs -0 rm -f |
| @rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS \ |
| $(obj)cscope.* $(obj)*.*~ |
| @rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) |
| @rm -f $(obj)u-boot.kwb |
| @rm -f $(obj)u-boot.imx |
| @rm -f $(obj)tools/{env/crc32.c,inca-swap-bytes} |
| @rm -f $(obj)arch/powerpc/cpu/mpc824x/bedbug_603e.c |
| @rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm |
| @[ ! -d $(obj)nand_spl ] || find $(obj)nand_spl -name "*" -type l -print | xargs rm -f |
| @[ ! -d $(obj)onenand_ipl ] || find $(obj)onenand_ipl -name "*" -type l -print | xargs rm -f |
| |
| ifeq ($(OBJTREE),$(SRCTREE)) |
| mrproper \ |
| distclean: clobber unconfig |
| else |
| mrproper \ |
| distclean: clobber unconfig |
| rm -rf $(obj)* |
| endif |
| |
| backup: |
| F=`basename $(TOPDIR)` ; cd .. ; \ |
| gtar --force-local -zcvf `date "+$$F-%Y-%m-%d-%T.tar.gz"` $$F |
| |
| ######################################################################### |