lpc32xx: cpu: add support for soft reset
Add support for optional soft reset (i.e. "RESOUT_N" not asserted during reset).
To be compatible with the original U-Boot code, when the "addr" parameter is 0, a hard is performed; for any other values, a soft reset is done.
Signed-off-by: Sylvain Lemieux <slemieux@tycoint.com>
diff --git a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
index f757474..bee9318 100644
--- a/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
+++ b/arch/arm/cpu/arm926ejs/lpc32xx/cpu.c
@@ -1,5 +1,5 @@
/*
- * Copyright (C) 2011 by Vladimir Zapolskiy <vz@mleia.com>
+ * Copyright (C) 2011-2015 by Vladimir Zapolskiy <vz@mleia.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
@@ -20,12 +20,23 @@
/* Enable watchdog clock */
setbits_le32(&clk->timclk_ctrl, CLK_TIMCLK_WATCHDOG);
- /* Reset pulse length is 13005 peripheral clock frames */
- writel(13000, &wdt->pulse);
+ /* To be compatible with the original U-Boot code:
+ * addr: - 0: perform hard reset.
+ * - !=0: perform a soft reset; i.e. "RESOUT_N" not asserted). */
+ if (addr == 0) {
+ /* Reset pulse length is 13005 peripheral clock frames */
+ writel(13000, &wdt->pulse);
- /* Force WDOG_RESET2 and RESOUT_N signal active */
- writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1 | WDTIM_MCTRL_M_RES2,
- &wdt->mctrl);
+ /* Force WDOG_RESET2 and RESOUT_N signal active */
+ writel(WDTIM_MCTRL_RESFRC2 | WDTIM_MCTRL_RESFRC1
+ | WDTIM_MCTRL_M_RES2, &wdt->mctrl);
+ } else {
+ /* Force match output active */
+ writel(0x01, &wdt->emr);
+
+ /* Internal reset on match output (no pulse on "RESOUT_N") */
+ writel(WDTIM_MCTRL_M_RES1, &wdt->mctrl);
+ }
while (1)
/* NOP */;