Fix CONFIG_ETH*ADDR for Ocotea board.
Sort Makefile.
Update docs.
diff --git a/Makefile b/Makefile
index 8674eb8..a55d88a 100644
--- a/Makefile
+++ b/Makefile
@@ -1148,6 +1148,24 @@
@./mkconfig $(@:_config=) mips mips tb0229
#########################################################################
+## MIPS32 AU1X00
+#########################################################################
+dbau1000_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1000 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1100_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1100 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+dbau1500_config : unconfig
+ @ >include/config.h
+ @echo "#define CONFIG_DBAU1500 1" >>include/config.h
+ @./mkconfig -a dbau1x00 mips mips dbau1x00
+
+#########################################################################
## MIPS64 5Kc
#########################################################################
@@ -1233,24 +1251,6 @@
@./mkconfig -a $(@:_config=) microblaze microblaze suzaku AtmarkTechno
#########################################################################
-## MIPS32 AU1X00
-#########################################################################
-dbau1000_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1000 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
-
-dbau1100_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1100 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
-
-dbau1500_config : unconfig
- @ >include/config.h
- @echo "#define CONFIG_DBAU1500 1" >>include/config.h
- @./mkconfig -a dbau1x00 mips mips dbau1x00
-
-#########################################################################
#########################################################################
clean:
diff --git a/README b/README
index bfccadf..ddb58c3 100644
--- a/README
+++ b/README
@@ -2554,8 +2554,9 @@
-n ==> set image name to 'name'
-d ==> use image data from 'datafile'
-Right now, all Linux kernels use the same load address (0x00000000),
-but the entry point address depends on the kernel version:
+Right now, all Linux kernels for PowerPC systems use the same load
+address (0x00000000), but the entry point address depends on the
+kernel version:
- 2.2.x kernels have the entry point at 0x0000000C,
- 2.3.x and later kernels have the entry point at 0x00000000.
diff --git a/common/env_common.c b/common/env_common.c
index d46f24f..4aa043e 100644
--- a/common/env_common.c
+++ b/common/env_common.c
@@ -94,6 +94,9 @@
#ifdef CONFIG_ETH2ADDR
"eth2addr=" MK_STR(CONFIG_ETH2ADDR) "\0"
#endif
+#ifdef CONFIG_ETH3ADDR
+ "eth3addr=" MK_STR(CONFIG_ETH3ADDR) "\0"
+#endif
#ifdef CONFIG_IPADDR
"ipaddr=" MK_STR(CONFIG_IPADDR) "\0"
#endif
diff --git a/include/configs/OCOTEA.h b/include/configs/OCOTEA.h
index 74e5acd..6f8fd1d 100644
--- a/include/configs/OCOTEA.h
+++ b/include/configs/OCOTEA.h
@@ -154,9 +154,9 @@
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_IPADDR 10.1.2.3
#define CONFIG_ETHADDR 00:04:AC:E3:28:8A
-#define CONFIG_ETHADDR1 00:04:AC:E3:28:8B
-#define CONFIG_ETHADDR2 00:04:AC:E3:28:8C
-#define CONFIG_ETHADDR3 00:04:AC:E3:28:8D
+#define CONFIG_ETH1ADDR 00:04:AC:E3:28:8B
+#define CONFIG_ETH2ADDR 00:04:AC:E3:28:8C
+#define CONFIG_ETH3ADDR 00:04:AC:E3:28:8D
#define CFG_RX_ETH_BUFFER 32 /* Number of ethernet rx buffers & descriptors */
#define CONFIG_SERVERIP 10.1.2.2
diff --git a/lib_mips/board.c b/lib_mips/board.c
index 65a0bc3..7f5fa80 100644
--- a/lib_mips/board.c
+++ b/lib_mips/board.c
@@ -190,8 +190,8 @@
void copy_code (ulong);
#endif
- /* Pointer is writable since we allocated a register for it.
- */
+ /* Pointer is writable since we allocated a register for it.
+ */
gd = &gd_data;
memset ((void *)gd, 0, sizeof (gd_t));
@@ -207,33 +207,27 @@
*/
addr = CFG_SDRAM_BASE + gd->ram_size;
- /* We can reserve some RAM "on top" here.
- */
+ /* We can reserve some RAM "on top" here.
+ */
- /* round down to next 4 kB limit.
- */
+ /* round down to next 4 kB limit.
+ */
addr &= ~(4096 - 1);
-#ifdef DEBUG
- printf ("Top of RAM usable for U-Boot at: %08lx\n", addr);
-#endif
+ debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
- /* Reserve memory for U-Boot code, data & bss
- * round down to next 16 kB limit
- */
+ /* Reserve memory for U-Boot code, data & bss
+ * round down to next 16 kB limit
+ */
addr -= len;
addr &= ~(16 * 1024 - 1);
-#ifdef DEBUG
- printf ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
-#endif
+ debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
- /* Reserve memory for malloc() arena.
- */
+ /* Reserve memory for malloc() arena.
+ */
addr_sp = addr - TOTAL_MALLOC_LEN;
-#ifdef DEBUG
- printf ("Reserving %dk for malloc() at: %08lx\n",
+ debug ("Reserving %dk for malloc() at: %08lx\n",
TOTAL_MALLOC_LEN >> 10, addr_sp);
-#endif
/*
* (permanently) allocate a Board Info struct
@@ -242,25 +236,20 @@
addr_sp -= sizeof(bd_t);
bd = (bd_t *)addr_sp;
gd->bd = bd;
-#ifdef DEBUG
- printf ("Reserving %d Bytes for Board Info at: %08lx\n",
+ debug ("Reserving %d Bytes for Board Info at: %08lx\n",
sizeof(bd_t), addr_sp);
-#endif
+
addr_sp -= sizeof(gd_t);
id = (gd_t *)addr_sp;
-#ifdef DEBUG
- printf ("Reserving %d Bytes for Global Data at: %08lx\n",
+ debug ("Reserving %d Bytes for Global Data at: %08lx\n",
sizeof (gd_t), addr_sp);
-#endif
- /* Reserve memory for boot params.
- */
+ /* Reserve memory for boot params.
+ */
addr_sp -= CFG_BOOTPARAMS_LEN;
bd->bi_boot_params = addr_sp;
-#ifdef DEBUG
- printf ("Reserving %dk for malloc() at: %08lx\n",
+ debug ("Reserving %dk for boot params() at: %08lx\n",
CFG_BOOTPARAMS_LEN >> 10, addr_sp);
-#endif
/*
* Finally, we set up a new (bigger) stack.
@@ -272,9 +261,8 @@
addr_sp &= ~0xF;
*((ulong *) addr_sp)-- = 0;
*((ulong *) addr_sp)-- = 0;
-#ifdef DEBUG
- printf ("Stack Pointer at: %08lx\n", addr_sp);
-#endif
+ debug ("Stack Pointer at: %08lx\n", addr_sp);
+
/*
* Save local variables to board info struct
*/
@@ -321,9 +309,7 @@
gd = id;
gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
-#ifdef DEBUG
- printf ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
-#endif
+ debug ("Now running in RAM - U-Boot at: %08lx\n", dest_addr);
gd->reloc_off = dest_addr - CFG_MONITOR_BASE;