* Add support for SK98xx driver
* Add PCI support for SL8245 board
* Support IceCube board configurations with 1 x AMD AM29LV065 (8 MB)
or 1 x AM29LV652 (two LV065 in one chip = 16 MB);
Run IPB at 133 Mhz; adjust the MII clock frequency accordingly
* Set BRG_CLK on PM825/826 to 64MHz (VCO_OUT / 4, instead of 16 MHz)
to allow for more accurate baudrate settings
(error now 0.7% at 115 kbps, instead of 3.5% before)
* Patch by Andreas Mohr, 4 Sep 2003:
Fix a lot of spelling errors
diff --git a/doc/README.POST b/doc/README.POST
index fba498a..a81e079 100644
--- a/doc/README.POST
+++ b/doc/README.POST
@@ -5,7 +5,7 @@
1. High-level requirements
-The key rquirements for this project are as follows:
+The key requirements for this project are as follows:
1) The project shall develop a flexible framework for implementing
and running Power-On-Self-Test in U-Boot. This framework shall
@@ -72,7 +72,7 @@
This group will contain those tests that do not take much
time and can be run on the regular basis (e.g. CPU test)
- 3) Tests running on in special "slow test more" only
+ 3) Tests running in special "slow test mode" only
This group will contain POST tests that consume much time
and cannot be run regularly (e.g. strong memory test, I2C test)
@@ -92,7 +92,7 @@
1) Tests running before relocating to RAM
- These tests will run immediatelly after initializing RAM
+ These tests will run immediately after initializing RAM
as to enable modifying it without taking care of its
contents. Basically, this group will contain memory tests
only.