ARM: davinci: remove support for cam_enc_4xx

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Marek Vasut <marex@denx.de>
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index e6cb390..681270d 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -18,10 +18,6 @@
 	bool "DA850 EVM board"
 	select SUPPORT_SPL
 
-config TARGET_CAM_ENC_4XX
-	bool "CAM ENC 4xx board"
-	select SUPPORT_SPL
-
 config TARGET_OMAPL138_LCDK
 	bool "OMAPL138 LCDK"
 	select SUPPORT_SPL
@@ -62,7 +58,6 @@
 	default "davinci"
 
 source "board/enbw/enbw_cmc/Kconfig"
-source "board/ait/cam_enc_4xx/Kconfig"
 source "board/Barix/ipam390/Kconfig"
 source "board/davinci/da8xxevm/Kconfig"
 source "board/davinci/dm355evm/Kconfig"
diff --git a/board/ait/cam_enc_4xx/Kconfig b/board/ait/cam_enc_4xx/Kconfig
deleted file mode 100644
index 64e18f4..0000000
--- a/board/ait/cam_enc_4xx/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_CAM_ENC_4XX
-
-config SYS_BOARD
-	default "cam_enc_4xx"
-
-config SYS_VENDOR
-	default "ait"
-
-config SYS_CONFIG_NAME
-	default "cam_enc_4xx"
-
-endif
diff --git a/board/ait/cam_enc_4xx/MAINTAINERS b/board/ait/cam_enc_4xx/MAINTAINERS
deleted file mode 100644
index d6477c6..0000000
--- a/board/ait/cam_enc_4xx/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-CAM_ENC_4XX BOARD
-M:	Heiko Schocher <hs@denx.de>
-S:	Maintained
-F:	board/ait/cam_enc_4xx/
-F:	include/configs/cam_enc_4xx.h
-F:	configs/cam_enc_4xx_defconfig
diff --git a/board/ait/cam_enc_4xx/Makefile b/board/ait/cam_enc_4xx/Makefile
deleted file mode 100644
index 0d03ce0..0000000
--- a/board/ait/cam_enc_4xx/Makefile
+++ /dev/null
@@ -1,10 +0,0 @@
-#
-# (C) Copyright 2000, 2001, 2002
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= cam_enc_4xx.o
diff --git a/board/ait/cam_enc_4xx/cam_enc_4xx.c b/board/ait/cam_enc_4xx/cam_enc_4xx.c
deleted file mode 100644
index c5687ba..0000000
--- a/board/ait/cam_enc_4xx/cam_enc_4xx.c
+++ /dev/null
@@ -1,1106 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <cli.h>
-#include <errno.h>
-#include <linux/mtd/nand.h>
-#include <nand.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/io.h>
-#include <asm/arch/hardware.h>
-#include <asm/ti-common/davinci_nand.h>
-#include <asm/arch/davinci_misc.h>
-#ifdef CONFIG_DAVINCI_MMC
-#include <mmc.h>
-#include <asm/arch/sdmmc_defs.h>
-#endif
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#ifndef CONFIG_SPL_BUILD
-static struct davinci_timer *timer =
-	(struct davinci_timer *)DAVINCI_TIMER3_BASE;
-
-static unsigned long get_timer_val(void)
-{
-	unsigned long now = readl(&timer->tim34);
-
-	return now;
-}
-
-static int timer_running(void)
-{
-	return readl(&timer->tcr) &
-		(DV_TIMER_TCR_ENAMODE_MASK << DV_TIMER_TCR_ENAMODE34_SHIFT);
-}
-
-static void stop_timer(void)
-{
-	writel(0x0, &timer->tcr);
-	return;
-}
-
-int checkboard(void)
-{
-	printf("Board: AIT CAM ENC 4XX\n");
-	return 0;
-}
-
-int board_init(void)
-{
-	gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_DRIVER_TI_EMAC
-static int cam_enc_4xx_check_network(void)
-{
-	char *s;
-
-	s = getenv("ethaddr");
-	if (!s)
-		return -EINVAL;
-
-	if (!is_valid_ethaddr((const u8 *)s))
-		return -EINVAL;
-
-	s = getenv("ipaddr");
-	if (!s)
-		return -EINVAL;
-
-	s = getenv("netmask");
-	if (!s)
-		return -EINVAL;
-
-	s = getenv("serverip");
-	if (!s)
-		return -EINVAL;
-
-	s = getenv("gatewayip");
-	if (!s)
-		return -EINVAL;
-
-	return 0;
-}
-int board_eth_init(bd_t *bis)
-{
-	int ret;
-
-	ret = cam_enc_4xx_check_network();
-	if (ret)
-		return ret;
-
-	davinci_emac_initialize();
-
-	return 0;
-}
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-static int
-davinci_std_read_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-				   uint8_t *buf, int oob_required, int page)
-{
-	struct nand_chip *this = mtd->priv;
-	int i, eccsize = chip->ecc.size;
-	int eccbytes = chip->ecc.bytes;
-	int eccsteps = chip->ecc.steps;
-	uint8_t *p = buf;
-	uint8_t *oob = chip->oob_poi;
-
-	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
-
-	chip->read_buf(mtd, oob, mtd->oobsize);
-
-	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x0, page & this->pagemask);
-
-
-	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
-		int stat;
-
-		chip->ecc.hwctl(mtd, NAND_ECC_READ);
-		chip->read_buf(mtd, p, eccsize);
-		chip->ecc.hwctl(mtd, NAND_ECC_READSYN);
-
-		if (chip->ecc.prepad)
-			oob += chip->ecc.prepad;
-
-		stat = chip->ecc.correct(mtd, p, oob, NULL);
-
-		if (stat == -1)
-			mtd->ecc_stats.failed++;
-		else
-			mtd->ecc_stats.corrected += stat;
-
-		oob += eccbytes;
-
-		if (chip->ecc.postpad)
-			oob += chip->ecc.postpad;
-	}
-
-	/* Calculate remaining oob bytes */
-	i = mtd->oobsize - (oob - chip->oob_poi);
-	if (i)
-		chip->read_buf(mtd, oob, i);
-
-	return 0;
-}
-
-static int davinci_std_write_page_syndrome(struct mtd_info *mtd,
-				    struct nand_chip *chip, const uint8_t *buf,
-				    int oob_required)
-{
-	unsigned char davinci_ecc_buf[NAND_MAX_OOBSIZE];
-	struct nand_chip *this = mtd->priv;
-	int i, eccsize = chip->ecc.size;
-	int eccbytes = chip->ecc.bytes;
-	int eccsteps = chip->ecc.steps;
-	int chunk = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
-	int offset = 0;
-	const uint8_t *p = buf;
-	uint8_t *oob = chip->oob_poi;
-
-	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
-		chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
-		chip->write_buf(mtd, p, eccsize);
-
-		/* Calculate ECC without prepad */
-		chip->ecc.calculate(mtd, p, oob + chip->ecc.prepad);
-
-		if (chip->ecc.prepad) {
-			offset = (chip->ecc.steps - eccsteps) * chunk;
-			memcpy(&davinci_ecc_buf[offset], oob, chip->ecc.prepad);
-			oob += chip->ecc.prepad;
-		}
-
-		offset = ((chip->ecc.steps - eccsteps) * chunk) +
-				chip->ecc.prepad;
-		memcpy(&davinci_ecc_buf[offset], oob, eccbytes);
-		oob += eccbytes;
-
-		if (chip->ecc.postpad) {
-			offset = ((chip->ecc.steps - eccsteps) * chunk) +
-					chip->ecc.prepad + eccbytes;
-			memcpy(&davinci_ecc_buf[offset], oob,
-				chip->ecc.postpad);
-			oob += chip->ecc.postpad;
-		}
-	}
-
-	/*
-	 * Write the sparebytes into the page once
-	 * all eccsteps have been covered
-	 */
-	for (i = 0; i < mtd->oobsize; i++)
-		writeb(davinci_ecc_buf[i], this->IO_ADDR_W);
-
-	/* Calculate remaining oob bytes */
-	i = mtd->oobsize - (oob - chip->oob_poi);
-	if (i)
-		chip->write_buf(mtd, oob, i);
-	return 0;
-}
-
-static int davinci_std_write_oob_syndrome(struct mtd_info *mtd,
-				   struct nand_chip *chip, int page)
-{
-	int pos, status = 0;
-	const uint8_t *bufpoi = chip->oob_poi;
-
-	pos = mtd->writesize;
-
-	chip->cmdfunc(mtd, NAND_CMD_SEQIN, pos, page);
-
-	chip->write_buf(mtd, bufpoi, mtd->oobsize);
-
-	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
-	status = chip->waitfunc(mtd, chip);
-
-	return status & NAND_STATUS_FAIL ? -1 : 0;
-}
-
-static int davinci_std_read_oob_syndrome(struct mtd_info *mtd,
-	struct nand_chip *chip, int page)
-{
-	struct nand_chip *this = mtd->priv;
-	uint8_t *buf = chip->oob_poi;
-	uint8_t *bufpoi = buf;
-
-	chip->cmdfunc(mtd, NAND_CMD_READOOB, 0x0, page & this->pagemask);
-
-	chip->read_buf(mtd, bufpoi, mtd->oobsize);
-
-	return 0;
-}
-
-static void nand_dm365evm_select_chip(struct mtd_info *mtd, int chip)
-{
-	struct nand_chip	*this = mtd->priv;
-	unsigned long		wbase = (unsigned long) this->IO_ADDR_W;
-	unsigned long		rbase = (unsigned long) this->IO_ADDR_R;
-
-	if (chip == 1) {
-		__set_bit(14, &wbase);
-		__set_bit(14, &rbase);
-	} else {
-		__clear_bit(14, &wbase);
-		__clear_bit(14, &rbase);
-	}
-	this->IO_ADDR_W = (void *)wbase;
-	this->IO_ADDR_R = (void *)rbase;
-}
-
-int board_nand_init(struct nand_chip *nand)
-{
-	davinci_nand_init(nand);
-	nand->select_chip = nand_dm365evm_select_chip;
-
-	return 0;
-}
-
-struct nand_ecc_ctrl org_ecc;
-static int notsaved = 1;
-
-static int nand_switch_hw_func(int mode)
-{
-	struct nand_chip *nand;
-	struct mtd_info *mtd;
-
-	if (nand_curr_device < 0 ||
-	    nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
-	    !nand_info[nand_curr_device].name) {
-		printf("Error: Can't switch hw functions," \
-			" no devices available\n");
-		return -1;
-	}
-
-	mtd = &nand_info[nand_curr_device];
-	nand = mtd->priv;
-
-	if (mode == 0) {
-		if (notsaved == 0) {
-			printf("switching to uboot hw functions.\n");
-			memcpy(&nand->ecc, &org_ecc,
-				sizeof(struct nand_ecc_ctrl));
-		}
-	} else {
-		/* RBL */
-		printf("switching to RBL hw functions.\n");
-		if (notsaved == 1) {
-			memcpy(&org_ecc, &nand->ecc,
-				sizeof(struct nand_ecc_ctrl));
-			notsaved = 0;
-		}
-		nand->ecc.mode = NAND_ECC_HW_SYNDROME;
-		nand->ecc.prepad = 6;
-		nand->ecc.read_page = davinci_std_read_page_syndrome;
-		nand->ecc.write_page = davinci_std_write_page_syndrome;
-		nand->ecc.read_oob = davinci_std_read_oob_syndrome;
-		nand->ecc.write_oob = davinci_std_write_oob_syndrome;
-	}
-	return mode;
-}
-
-static int hwmode;
-
-static int do_switch_ecc(cmd_tbl_t *cmdtp, int flag, int argc,
-		char *const argv[])
-{
-	if (argc != 2)
-		goto usage;
-	if (strncmp(argv[1], "rbl", 2) == 0)
-		hwmode = nand_switch_hw_func(1);
-	else if (strncmp(argv[1], "uboot", 2) == 0)
-		hwmode = nand_switch_hw_func(0);
-	else
-		goto usage;
-
-	return 0;
-
-usage:
-	printf("Usage: nandrbl %s\n", cmdtp->usage);
-	return 1;
-}
-
-U_BOOT_CMD(
-	nandrbl, 2, 1,	do_switch_ecc,
-	"switch between rbl/uboot NAND ECC calculation algorithm",
-	"[rbl/uboot] - Switch between rbl/uboot NAND ECC algorithm"
-);
-
-
-#endif /* #ifdef CONFIG_NAND_DAVINCI */
-
-#ifdef CONFIG_DAVINCI_MMC
-static struct davinci_mmc mmc_sd0 = {
-	.reg_base	= (struct davinci_mmc_regs *)DAVINCI_MMC_SD0_BASE,
-	.input_clk	= 121500000,
-	.host_caps	= MMC_MODE_4BIT,
-	.voltages	= MMC_VDD_32_33 | MMC_VDD_33_34,
-	.version	= MMC_CTLR_VERSION_2,
-};
-
-int board_mmc_init(bd_t *bis)
-{
-	int err;
-
-	/* Add slot-0 to mmc subsystem */
-	err = davinci_mmc_init(bis, &mmc_sd0);
-
-	return err;
-}
-#endif
-
-int board_late_init(void)
-{
-	struct davinci_gpio *gpio = davinci_gpio_bank45;
-
-	/* 24MHz InputClock / 15 prediv -> 1.6 MHz timer running */
-	while ((get_timer_val() < CONFIG_AIT_TIMER_TIMEOUT) &&
-		timer_running())
-		;
-
-	/* 1 sec reached -> stop timer, clear all LED */
-	stop_timer();
-	clrbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK);
-	return 0;
-}
-
-void reset_phy(void)
-{
-	char *name = "GENERIC @ 0x00";
-
-	/* reset the phy */
-	miiphy_reset(name, 0x0);
-}
-
-#else /* #ifndef CONFIG_SPL_BUILD */
-static void cam_enc_4xx_set_all_led(void)
-{
-	struct davinci_gpio *gpio = davinci_gpio_bank45;
-
-	setbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK);
-}
-
-/*
- * TIMER 0 is used for tick
- */
-static struct davinci_timer *timer =
-	(struct davinci_timer *)DAVINCI_TIMER3_BASE;
-
-#define TIMER_LOAD_VAL	0xffffffff
-#define TIM_CLK_DIV	16
-
-static int cam_enc_4xx_timer_init(void)
-{
-	/* We are using timer34 in unchained 32-bit mode, full speed */
-	writel(0x0, &timer->tcr);
-	writel(0x0, &timer->tgcr);
-	writel(0x06 | ((TIM_CLK_DIV - 1) << 8), &timer->tgcr);
-	writel(0x0, &timer->tim34);
-	writel(TIMER_LOAD_VAL, &timer->prd34);
-	writel(2 << 22, &timer->tcr);
-	return 0;
-}
-
-void board_gpio_init(void)
-{
-	struct davinci_gpio *gpio;
-
-	cam_enc_4xx_set_all_led();
-	cam_enc_4xx_timer_init();
-	gpio = davinci_gpio_bank01;
-	clrbits_le32(&gpio->dir, ~0xfdfffffe);
-	/* clear LED D14 = GPIO25 */
-	clrbits_le32(&gpio->out_data, 0x02000000);
-	gpio = davinci_gpio_bank23;
-	clrbits_le32(&gpio->dir, ~0x5ff0afef);
-	/* set GPIO61 to 1 -> intern UART0 as Console */
-	setbits_le32(&gpio->out_data, 0x20000000);
-	/*
-	 * PHY out of reset GIO 50 = 1
-	 * NAND WP off GIO 51 = 1
-	 */
-	setbits_le32(&gpio->out_data, 0x000c0004);
-	gpio = davinci_gpio_bank45;
-	clrbits_le32(&gpio->dir, ~(0xdb2fffff) | CONFIG_CAM_ENC_LED_MASK);
-	/*
-	 * clear LED:
-	 * D17 = GPIO86
-	 * D11 = GPIO87
-	 * GPIO88
-	 * GPIO89
-	 * D13 = GPIO90
-	 * GPIO91
-	 */
-	clrbits_le32(&gpio->out_data, CONFIG_CAM_ENC_LED_MASK);
-	gpio = davinci_gpio_bank67;
-	clrbits_le32(&gpio->dir, ~0x000007ff);
-}
-
-/*
- * functions for the post memory test.
- */
-int arch_memory_test_prepare(u32 *vstart, u32 *size, phys_addr_t *phys_offset)
-{
-	*vstart = CONFIG_SYS_SDRAM_BASE;
-	*size = PHYS_SDRAM_1_SIZE;
-	*phys_offset = 0;
-	return 0;
-}
-
-void arch_memory_failure_handle(void)
-{
-	cam_enc_4xx_set_all_led();
-	puts("mem failure\n");
-	while (1)
-		;
-}
-#endif
-#if defined(CONFIG_MENU)
-#include "menu.h"
-
-#define MENU_EXIT		-1
-#define MENU_EXIT_BOOTCMD	-2
-#define MENU_STAY		0
-#define MENU_MAIN		1
-#define MENU_UPDATE		2
-#define MENU_NETWORK		3
-#define MENU_LOAD		4
-
-static int menu_start;
-
-#define FIT_SUBTYPE_UNKNOWN		0
-#define FIT_SUBTYPE_UBL_HEADER		1
-#define FIT_SUBTYPE_SPL_IMAGE		2
-#define FIT_SUBTYPE_UBOOT_IMAGE		3
-#define FIT_SUBTYPE_DF_ENV_IMAGE	4
-#define FIT_SUBTYPE_RAMDISK_IMAGE	5
-
-struct fit_images_info {
-	u_int8_t type;
-	int subtype;
-	char desc[200];
-	const void *data;
-	size_t size;
-};
-
-static struct fit_images_info imgs[10];
-
-struct menu_display {
-	char	title[50];
-	int	timeout; /* in sec */
-	int	id; /* MENU_* */
-	char	**menulist;
-	int (*menu_evaluate)(char *choice);
-};
-
-char *menu_main[] = {
-	"(1) Boot",
-	"(2) Update Software",
-	"(3) Reset to default setting and boot",
-	"(4) Enter U-Boot console",
-	NULL
-};
-
-char *menu_update[] = {
-	"(1) Network settings",
-	"(2) load image",
-	"(3) back to main",
-	NULL
-};
-
-char *menu_load[] = {
-	"(1) install image",
-	"(2) cancel",
-	NULL
-};
-
-char *menu_network[] = {
-	"(1) ipaddr   ",
-	"(2) netmask  ",
-	"(3) serverip ",
-	"(4) gatewayip",
-	"(5) tftp image name",
-	"(6) back to update software",
-	NULL
-};
-
-static void ait_menu_print(void *data)
-{
-	printf("%s\n", (char *)data);
-	return;
-}
-
-static char *menu_handle(struct menu_display *display)
-{
-	struct menu *m;
-	int i;
-	void *choice = NULL;
-	char key[2];
-	int ret;
-	char *s;
-	char temp[6][200];
-
-	m = menu_create(display->title, display->timeout, 1, ait_menu_print,
-			NULL, NULL);
-
-	for (i = 0; display->menulist[i]; i++) {
-		sprintf(key, "%d", i + 1);
-		if (display->id == MENU_NETWORK) {
-			switch (i) {
-			case 0:
-				s = getenv("ipaddr");
-				break;
-			case 1:
-				s = getenv("netmask");
-				break;
-			case 2:
-				s = getenv("serverip");
-				break;
-			case 3:
-				s = getenv("gatewayip");
-				break;
-			case 4:
-				s = getenv("img_file");
-				break;
-			default:
-				s = NULL;
-				break;
-			}
-			if (s) {
-				sprintf(temp[i], "%s: %s",
-					display->menulist[i], s);
-				ret = menu_item_add(m, key, temp[i]);
-			} else {
-				ret = menu_item_add(m, key,
-					display->menulist[i]);
-			}
-		} else {
-			ret = menu_item_add(m, key, display->menulist[i]);
-		}
-
-		if (ret != 1) {
-			printf("failed to add item!");
-			menu_destroy(m);
-			return NULL;
-		}
-	}
-	sprintf(key, "%d", 1);
-	menu_default_set(m, key);
-
-	if (menu_get_choice(m, &choice) != 1)
-		debug("Problem picking a choice!\n");
-
-	menu_destroy(m);
-
-	return choice;
-}
-
-static int ait_menu_show(struct menu_display *display, int bootdelay)
-{
-	int end = MENU_STAY;
-	char *choice;
-
-	if ((menu_start == 0) && (display->id == MENU_MAIN))
-		display->timeout = bootdelay;
-	else
-		display->timeout = 0;
-
-	while (end == MENU_STAY) {
-		choice = menu_handle(display);
-		if (choice)
-			end = display->menu_evaluate(choice);
-
-		if (end == display->id)
-			end = MENU_STAY;
-		if (display->id == MENU_MAIN) {
-			if (menu_start == 0)
-				end = MENU_EXIT_BOOTCMD;
-			else
-				display->timeout = 0;
-		}
-	}
-	return end;
-}
-
-static int ait_writeublheader(void)
-{
-	char s[20];
-	unsigned long i;
-	int ret;
-
-	for (i = CONFIG_SYS_NAND_BLOCK_SIZE;
-		i < CONFIG_SYS_NAND_U_BOOT_OFFS;
-		i += CONFIG_SYS_NAND_BLOCK_SIZE) {
-		sprintf(s, "%lx", i);
-		ret = setenv("header_addr", s);
-		if (ret == 0)
-			ret = run_command("run img_writeheader", 0);
-		if (ret != 0)
-			break;
-	}
-	return ret;
-}
-
-static int ait_menu_install_images(void)
-{
-	int ret = 0;
-	int count = 0;
-	char s[100];
-	char *t;
-
-	/*
-	 * possible image types:
-	 * FIT_SUBTYPE_UNKNOWN
-	 * FIT_SUBTYPE_UBL_HEADER
-	 * FIT_SUBTYPE_SPL_IMAGE
-	 * FIT_SUBTYPE_UBOOT_IMAGE
-	 * FIT_SUBTYPE_DF_ENV_IMAGE
-	 * FIT_SUBTYPE_RAMDISK_IMAGE
-	 *
-	 * use Envvariables:
-	 * img_addr_r: image start addr
-	 * header_addr: addr where to write to UBL header
-	 * img_writeheader: write ubl header to nand
-	 * img_writespl: write spl to nand
-	 * img_writeuboot: write uboot to nand
-	 * img_writedfenv: write default environment to ubi volume
-	 * img_volume: which ubi volume should be updated with img_writeramdisk
-	 * filesize: size of data for updating ubi volume
-	 * img_writeramdisk: write ramdisk to ubi volume
-	 */
-
-	while (imgs[count].type != IH_TYPE_INVALID) {
-		printf("Installing %s\n",
-			genimg_get_type_name(imgs[count].type));
-		sprintf(s, "%p", imgs[count].data);
-		setenv("img_addr_r", s);
-		sprintf(s, "%lx", (unsigned long)imgs[count].size);
-		setenv("filesize", s);
-		switch (imgs[count].subtype) {
-		case FIT_SUBTYPE_DF_ENV_IMAGE:
-			ret = run_command("run img_writedfenv", 0);
-			break;
-		case FIT_SUBTYPE_RAMDISK_IMAGE:
-			t = getenv("img_volume");
-			if (!t) {
-				ret = setenv("img_volume", "rootfs1");
-			} else {
-				/* switch to other volume */
-				if (strncmp(t, "rootfs1", 7) == 0)
-					ret = setenv("img_volume", "rootfs2");
-				else
-					ret = setenv("img_volume", "rootfs1");
-			}
-			if (ret != 0)
-				break;
-
-			ret = run_command("run img_writeramdisk", 0);
-			break;
-		case FIT_SUBTYPE_SPL_IMAGE:
-			ret = run_command("run img_writespl", 0);
-			break;
-		case FIT_SUBTYPE_UBL_HEADER:
-			ret = ait_writeublheader();
-			break;
-		case FIT_SUBTYPE_UBOOT_IMAGE:
-			ret = run_command("run img_writeuboot", 0);
-			break;
-		default:
-			/* not supported type */
-			break;
-		}
-		count++;
-	}
-	/* now save dvn_* and img_volume env vars to new values */
-	if (ret == 0) {
-		t = getenv("x_dvn_boot_vers");
-		if (t)
-			setenv("dvn_boot_vers", t);
-
-		t = getenv("x_dvn_app_vers");
-		if (t)
-			setenv("dvn_boot_vers", t);
-
-		setenv("x_dvn_boot_vers", NULL);
-		setenv("x_dvn_app_vers", NULL);
-		ret = run_command("run savenewvers", 0);
-	}
-
-	return ret;
-}
-
-static int ait_menu_evaluate_load(char *choice)
-{
-	if (!choice)
-		return -1;
-
-	switch (choice[1]) {
-	case '1':
-		/* install image */
-		ait_menu_install_images();
-		break;
-	case '2':
-		/* cancel, back to main */
-		setenv("x_dvn_boot_vers", NULL);
-		setenv("x_dvn_app_vers", NULL);
-		break;
-	}
-
-	return MENU_MAIN;
-}
-
-struct menu_display ait_load = {
-	.title = "AIT load image",
-	.timeout = 0,
-	.id = MENU_LOAD,
-	.menulist = menu_load,
-	.menu_evaluate = ait_menu_evaluate_load,
-};
-
-static void ait_menu_read_env(char *name)
-{
-	char output[CONFIG_SYS_CBSIZE];
-	char cbuf[CONFIG_SYS_CBSIZE];
-	int readret;
-	int ret;
-
-	sprintf(output, "%s old: %s value: ", name, getenv(name));
-	memset(cbuf, 0, CONFIG_SYS_CBSIZE);
-	readret = cli_readline_into_buffer(output, cbuf, 0);
-
-	if (readret >= 0) {
-		ret = setenv(name, cbuf);
-		if (ret) {
-			printf("Error setting %s\n", name);
-			return;
-		}
-	}
-	return;
-}
-
-static int ait_menu_evaluate_network(char *choice)
-{
-	if (!choice)
-		return MENU_MAIN;
-
-	switch (choice[1]) {
-	case '1':
-		ait_menu_read_env("ipaddr");
-		break;
-	case '2':
-		ait_menu_read_env("netmask");
-		break;
-	case '3':
-		ait_menu_read_env("serverip");
-		break;
-	case '4':
-		ait_menu_read_env("gatewayip");
-		break;
-	case '5':
-		ait_menu_read_env("img_file");
-		break;
-	case '6':
-		return MENU_UPDATE;
-		break;
-	}
-
-	return MENU_STAY;
-}
-
-struct menu_display ait_network = {
-	.title = "AIT network settings",
-	.timeout = 0,
-	.id = MENU_NETWORK,
-	.menulist = menu_network,
-	.menu_evaluate = ait_menu_evaluate_network,
-};
-
-static int fit_get_subtype(const void *fit, int noffset, char **subtype)
-{
-	int len;
-
-	*subtype = (char *)fdt_getprop(fit, noffset, "subtype", &len);
-	if (*subtype == NULL)
-		return -1;
-
-	return 0;
-}
-
-static int ait_subtype_nr(char *subtype)
-{
-	int ret = FIT_SUBTYPE_UNKNOWN;
-
-	if (!strncmp("ublheader", subtype, strlen("ublheader")))
-		return FIT_SUBTYPE_UBL_HEADER;
-	if (!strncmp("splimage", subtype, strlen("splimage")))
-		return FIT_SUBTYPE_SPL_IMAGE;
-	if (!strncmp("ubootimage", subtype, strlen("ubootimage")))
-		return FIT_SUBTYPE_UBOOT_IMAGE;
-	if (!strncmp("dfenvimage", subtype, strlen("dfenvimage")))
-		return FIT_SUBTYPE_DF_ENV_IMAGE;
-
-	return ret;
-}
-
-static int ait_menu_check_image(void)
-{
-	char *s;
-	unsigned long fit_addr;
-	void *addr;
-	int format;
-	char *desc;
-	char *subtype;
-	int images_noffset;
-	int noffset;
-	int ndepth;
-	int count = 0;
-	int ret;
-	int i;
-	int found_uboot = -1;
-	int found_ramdisk = -1;
-
-	memset(imgs, 0, sizeof(imgs));
-	s = getenv("fit_addr_r");
-	fit_addr = s ? (unsigned long)simple_strtol(s, NULL, 16) : \
-			CONFIG_BOARD_IMG_ADDR_R;
-
-	addr = (void *)fit_addr;
-	/* check if it is a FIT image */
-	format = genimg_get_format(addr);
-	if (format != IMAGE_FORMAT_FIT)
-		return -EINVAL;
-
-	if (!fit_check_format(addr))
-		return -EINVAL;
-
-	/* print the FIT description */
-	ret = fit_get_desc(addr, 0, &desc);
-	printf("FIT description: ");
-	if (ret)
-		printf("unavailable\n");
-	else
-		printf("%s\n", desc);
-
-	/* find images */
-	images_noffset = fdt_path_offset(addr, FIT_IMAGES_PATH);
-	if (images_noffset < 0) {
-		printf("Can't find images parent node '%s' (%s)\n",
-			FIT_IMAGES_PATH, fdt_strerror(images_noffset));
-		return -EINVAL;
-	}
-
-	/* Process its subnodes, print out component images details */
-	for (ndepth = 0, count = 0,
-		noffset = fdt_next_node(addr, images_noffset, &ndepth);
-		(noffset >= 0) && (ndepth > 0);
-		noffset = fdt_next_node(addr, noffset, &ndepth)) {
-		if (ndepth == 1) {
-			/*
-			 * Direct child node of the images parent node,
-			 * i.e. component image node.
-			 */
-			printf("Image %u (%s)\n", count,
-					fit_get_name(addr, noffset, NULL));
-
-			fit_image_print(addr, noffset, "");
-
-			fit_image_get_type(addr, noffset,
-				&imgs[count].type);
-			/* Mandatory properties */
-			ret = fit_get_desc(addr, noffset, &desc);
-			printf("Description:  ");
-			if (ret)
-				printf("unavailable\n");
-			else
-				printf("%s\n", desc);
-
-			ret = fit_get_subtype(addr, noffset, &subtype);
-			printf("Subtype:  ");
-			if (ret) {
-				printf("unavailable\n");
-			} else {
-				imgs[count].subtype = ait_subtype_nr(subtype);
-				printf("%s %d\n", subtype,
-					imgs[count].subtype);
-			}
-
-			sprintf(imgs[count].desc, "%s", desc);
-
-			ret = fit_image_get_data(addr, noffset,
-				&imgs[count].data,
-				&imgs[count].size);
-
-			printf("Data Size:    ");
-			if (ret)
-				printf("unavailable\n");
-			else
-				genimg_print_size(imgs[count].size);
-			printf("Data @ %p\n", imgs[count].data);
-			count++;
-		}
-	}
-
-	for (i = 0; i < count; i++) {
-		if (imgs[i].subtype == FIT_SUBTYPE_UBOOT_IMAGE)
-			found_uboot = i;
-		if (imgs[i].type == IH_TYPE_RAMDISK) {
-			found_ramdisk = i;
-			imgs[i].subtype = FIT_SUBTYPE_RAMDISK_IMAGE;
-		}
-	}
-
-	/* dvn_* env var update, if the FIT descriptors are different */
-	if (found_uboot >= 0) {
-		s = getenv("dvn_boot_vers");
-		if (s) {
-			ret = strcmp(s, imgs[found_uboot].desc);
-			if (ret != 0) {
-				setenv("x_dvn_boot_vers",
-					imgs[found_uboot].desc);
-			} else {
-				found_uboot = -1;
-				printf("no new uboot version\n");
-			}
-		} else {
-			setenv("dvn_boot_vers", imgs[found_uboot].desc);
-		}
-	}
-	if (found_ramdisk >= 0) {
-		s = getenv("dvn_app_vers");
-		if (s) {
-			ret = strcmp(s, imgs[found_ramdisk].desc);
-			if (ret != 0) {
-				setenv("x_dvn_app_vers",
-					imgs[found_ramdisk].desc);
-			} else {
-				found_ramdisk = -1;
-				printf("no new ramdisk version\n");
-			}
-		} else {
-			setenv("dvn_app_vers", imgs[found_ramdisk].desc);
-		}
-	}
-	if ((found_uboot == -1) && (found_ramdisk == -1))
-		return -EINVAL;
-
-	return 0;
-}
-
-static int ait_menu_evaluate_update(char *choice)
-{
-	int ret;
-
-	if (!choice)
-		return MENU_MAIN;
-
-	switch (choice[1]) {
-	case '1':
-		return ait_menu_show(&ait_network, 0);
-		break;
-	case '2':
-		/* load image */
-		ret = run_command("run load_img", 0);
-		printf("ret: %d\n", ret);
-		if (ret)
-			return MENU_UPDATE;
-
-		ret = ait_menu_check_image();
-		if (ret)
-			return MENU_UPDATE;
-
-		return ait_menu_show(&ait_load, 0);
-		break;
-	case '3':
-		return MENU_MAIN;
-		break;
-
-	}
-
-	return MENU_MAIN;
-}
-
-struct menu_display ait_update = {
-	.title = "AIT Update Software",
-	.timeout = 0,
-	.id = MENU_UPDATE,
-	.menulist = menu_update,
-	.menu_evaluate = ait_menu_evaluate_update,
-};
-
-static int ait_menu_evaluate_main(char *choice)
-{
-	if (!choice)
-		return MENU_STAY;
-
-	menu_start = 1;
-	switch (choice[1]) {
-	case '1':
-		/* run bootcmd */
-		return MENU_EXIT_BOOTCMD;
-		break;
-	case '2':
-		return ait_menu_show(&ait_update, 0);
-		break;
-	case '3':
-		/* reset to default settings */
-		setenv("app_reset", "yes");
-		return MENU_EXIT_BOOTCMD;
-		break;
-	case '4':
-		/* u-boot shell */
-		return MENU_EXIT;
-		break;
-	}
-
-	return MENU_EXIT;
-}
-
-struct menu_display ait_main = {
-	.title = "AIT Main",
-	.timeout = CONFIG_BOOTDELAY,
-	.id = MENU_MAIN,
-	.menulist = menu_main,
-	.menu_evaluate = ait_menu_evaluate_main,
-};
-
-int menu_show(int bootdelay)
-{
-	int ret;
-
-	run_command("run saveparms", 0);
-	ret = ait_menu_show(&ait_main, bootdelay);
-	run_command("run restoreparms", 0);
-
-	if (ret == MENU_EXIT_BOOTCMD)
-		return 0;
-
-	return MENU_EXIT;
-}
-
-void menu_display_statusline(struct menu *m)
-{
-	char *s1, *s2;
-
-	s1 = getenv("x_dvn_boot_vers");
-	if (!s1)
-		s1 = getenv("dvn_boot_vers");
-
-	s2 = getenv("x_dvn_app_vers");
-	if (!s2)
-		s2 = getenv("dvn_app_vers");
-
-	printf("State: dvn_boot_vers: %s dvn_app_vers: %s\n", s1, s2);
-	return;
-}
-#endif
diff --git a/board/ait/cam_enc_4xx/config.mk b/board/ait/cam_enc_4xx/config.mk
deleted file mode 100644
index 2022151..0000000
--- a/board/ait/cam_enc_4xx/config.mk
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# 	AIT cam_enc_4xx board
-#	cam_enc_4xx board has 1 bank of 256 MB DDR RAM
-#	Physical Address: 8000'0000 to 9000'0000
-#
-# Linux Kernel is expected to be at 8000'8000, entry 8000'8000
-# (mem base + reserved)
-#
-
-UBL_CONFIG = $(srctree)/board/$(BOARDDIR)/ublimage.cfg
-ifndef CONFIG_SPL_BUILD
-ALL-y += u-boot.ubl
-else
-# as SPL_TEXT_BASE is not page-aligned, we need for some
-# linkers the -n flag (Do not page align data), to prevent
-# the following error message:
-# arm-linux-ld: u-boot-spl: Not enough room for program headers, try linking
-# with -N
-LDFLAGS_u-boot-spl += -n
-endif
diff --git a/board/ait/cam_enc_4xx/u-boot-spl.lds b/board/ait/cam_enc_4xx/u-boot-spl.lds
deleted file mode 100644
index f5c19df..0000000
--- a/board/ait/cam_enc_4xx/u-boot-spl.lds
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * (C) Copyright 2002
- * Gary Jennejohn, DENX Software Engineering, <garyj@denx.de>
- *
- * (C) Copyright 2008
- * Guennadi Liakhovetki, DENX Software Engineering, <lg@denx.de>
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-MEMORY { .sram : ORIGIN = CONFIG_SPL_TEXT_BASE,\
-		LENGTH = CONFIG_SPL_MAX_FOOTPRINT }
-
-OUTPUT_FORMAT("elf32-littlearm", "elf32-littlearm", "elf32-littlearm")
-OUTPUT_ARCH(arm)
-ENTRY(_start)
-SECTIONS
-{
-	. = CONFIG_SPL_TEXT_BASE;
-
-	. = ALIGN(4);
-	.text      :
-	{
-	__start = .;
-	  *(.vectors)
-	  arch/arm/cpu/arm926ejs/start.o	(.text*)
-	  *(.text*)
-	} >.sram
-
-	. = ALIGN(4);
-	.rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } >.sram
-
-	. = ALIGN(4);
-	.data : { *(SORT_BY_ALIGNMENT(.data*)) } >.sram
-	. = ALIGN(4);
-	.rel.dyn : {
-		__rel_dyn_start = .;
-		*(.rel*)
-		__rel_dyn_end = .;
-	} >.sram
-
-	.bss :
-	{
-		. = ALIGN(4);
-		__bss_start = .;
-		*(.bss*)
-		. = ALIGN(4);
-		__bss_end = .;
-	} >.sram
-
-	__image_copy_end = .;
-
-	.end :
-	{
-		*(.__end)
-	}
-}
diff --git a/board/ait/cam_enc_4xx/ublimage.cfg b/board/ait/cam_enc_4xx/ublimage.cfg
deleted file mode 100644
index d4fe705..0000000
--- a/board/ait/cam_enc_4xx/ublimage.cfg
+++ /dev/null
@@ -1,31 +0,0 @@
-#
-# (C Copyright 2011
-# Heiko Schocher DENX Software Engineering hs@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-# Refer doc/README.ublimage for more details about how-to configure
-# and create ublimage boot image
-#
-# The syntax is taken as close as possible with the kwbimage
-
-# UBL special mode : one of
-# safe (the board has no nand neither onenand)
-MODE	safe
-
-# Entry point address for the user bootloader (absolute address)
-# nand spl TEXT_BASE = 0x20 !!
-ENTRY	0x00000020
-
-# Number of pages (size of user bootloader in number of pages)
-# @ nand spl 6 pages
-PAGES	6
-
-# Block number where user bootloader is present
-START_BLOCK	0
-
-# Page number where user bootloader is present
-# Page 0 is always UBL header
-START_PAGE	0
-
-LD_ADDR		0x20
diff --git a/configs/cam_enc_4xx_defconfig b/configs/cam_enc_4xx_defconfig
deleted file mode 100644
index a67bf0e..0000000
--- a/configs/cam_enc_4xx_defconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_DAVINCI=y
-CONFIG_TARGET_CAM_ENC_4XX=y
-CONFIG_SPL=y
-# CONFIG_CMD_IMLS is not set
-# CONFIG_CMD_FLASH is not set
-# CONFIG_CMD_FPGA is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_SPI_FLASH=y
-CONFIG_SYS_PROMPT="cam_enc_4xx> "
diff --git a/doc/README.scrapyard b/doc/README.scrapyard
index f029a0f..fb1ed42 100644
--- a/doc/README.scrapyard
+++ b/doc/README.scrapyard
@@ -12,6 +12,7 @@
 
 Board            Arch        CPU            Commit      Removed     Last known maintainer/contact
 =================================================================================================
+cam_enc_4xx      arm         arm926ejs      -           -           Heiko Schocher <hs@denx.de>
 atstk1003        avr32       -              e5354b8a    2015-06-10  Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
 atstk1004        avr32       -              e5354b8a    2015-06-10  Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
 atstk1006        avr32       -              e5354b8a    2015-06-10  Haavard Skinnemoen <haavard.skinnemoen@atmel.com>
diff --git a/include/configs/cam_enc_4xx.h b/include/configs/cam_enc_4xx.h
deleted file mode 100644
index 578c4ab..0000000
--- a/include/configs/cam_enc_4xx.h
+++ /dev/null
@@ -1,504 +0,0 @@
-/*
- * Copyright (C) 2009 Texas Instruments Incorporated
- *
- * Copyright (C) 2011
- * Heiko Schocher, DENX Software Engineering, hs@denx.de.
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_SYS_NO_FLASH		/* that is, no *NOR* flash */
-#define CONFIG_SYS_CONSOLE_INFO_QUIET
-
-/* SoC Configuration */
-#define CONFIG_SYS_TIMERBASE		0x01c21400	/* use timer 0 */
-#define CONFIG_SYS_HZ_CLOCK		24000000	/* timer0 freq */
-#define CONFIG_SOC_DM365
-
-#define CONFIG_MACH_TYPE	MACH_TYPE_DAVINCI_DM365_EVM
-
-#define CONFIG_HOSTNAME			cam_enc_4xx
-
-#define	CONFIG_BOARD_LATE_INIT
-#define CONFIG_CAM_ENC_LED_MASK		0x0fc00000
-
-/* Memory Info */
-#define CONFIG_NR_DRAM_BANKS		1
-#define PHYS_SDRAM_1			0x80000000
-#define PHYS_SDRAM_1_SIZE		(256 << 20)	/* 256 MiB */
-#define DDR_4BANKS				/* 4-bank DDR2 (256MB) */
-#define CONFIG_MAX_RAM_BANK_SIZE	(256 << 20)	/* 256 MB */
-#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
-
-/* Serial Driver info: UART0 for console  */
-#define CONFIG_SYS_NS16550
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	-4
-#define CONFIG_SYS_NS16550_COM1		0x01c20000
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_HZ_CLOCK
-#define CONFIG_CONS_INDEX		1
-#define CONFIG_BAUDRATE			115200
-
-/* Network Configuration */
-#define CONFIG_DRIVER_TI_EMAC
-#define CONFIG_EMAC_MDIO_PHY_NUM	0
-#define	CONFIG_SYS_EMAC_TI_CLKDIV	0xa9	/* 1MHz */
-#define CONFIG_MII
-#define CONFIG_BOOTP_DNS
-#define CONFIG_BOOTP_DNS2
-#define CONFIG_BOOTP_SEND_HOSTNAME
-#define CONFIG_NET_RETRY_COUNT	10
-#define CONFIG_CMD_MII
-#define CONFIG_SYS_DCACHE_OFF
-#define CONFIG_RESET_PHY_R
-
-/* I2C */
-#define CONFIG_SYS_I2C
-#define CONFIG_SYS_I2C_DAVINCI
-#define CONFIG_SYS_DAVINCI_I2C_SPEED		400000
-#define CONFIG_SYS_DAVINCI_I2C_SLAVE		0x10	/* SMBus host address */
-
-/* NAND: socketed, two chipselects, normally 2 GBytes */
-#define CONFIG_NAND_DAVINCI
-#define CONFIG_SYS_NAND_CS		2
-#define CONFIG_SYS_NAND_USE_FLASH_BBT
-#define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
-#define CONFIG_SYS_NAND_PAGE_2K
-
-#define CONFIG_SYS_NAND_LARGEPAGE
-#define CONFIG_SYS_NAND_BASE_LIST	{ 0x02000000, }
-/* socket has two chipselects, nCE0 gated by address BIT(14) */
-#define CONFIG_SYS_MAX_NAND_DEVICE	1
-
-/* SPI support */
-#define CONFIG_SPI
-#define CONFIG_SPI_FLASH_STMICRO
-#define CONFIG_DAVINCI_SPI
-#define CONFIG_SYS_SPI_BASE		DAVINCI_SPI1_BASE
-#define CONFIG_SYS_SPI_CLK		davinci_clk_get(SPI_PLLDIV)
-#define CONFIG_SF_DEFAULT_SPEED		3000000
-#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
-#define CONFIG_CMD_SF
-
-/* SD/MMC */
-#define CONFIG_MMC
-#define CONFIG_GENERIC_MMC
-#define CONFIG_DAVINCI_MMC
-#define CONFIG_MMC_MBLOCK
-
-/* U-Boot command configuration */
-#define CONFIG_CMD_ASKENV
-#define CONFIG_CMD_CACHE
-#define CONFIG_CMD_DHCP
-#define CONFIG_CMD_I2C
-#define CONFIG_CMD_PING
-#define CONFIG_CMD_SAVES
-
-#ifdef CONFIG_CMD_BDI
-#define CONFIG_CLOCKS
-#endif
-
-#ifdef CONFIG_MMC
-#define CONFIG_DOS_PARTITION
-#define CONFIG_CMD_EXT2
-#define CONFIG_CMD_FAT
-#define CONFIG_CMD_MMC
-#endif
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_CMD_MTDPARTS
-#define CONFIG_MTD_PARTITIONS
-#define CONFIG_MTD_DEVICE
-#define CONFIG_CMD_NAND
-#define CONFIG_CMD_UBI
-#define CONFIG_CMD_UBIFS
-#define CONFIG_RBTREE
-#define CONFIG_LZO
-#endif
-
-#define CONFIG_CRC32_VERIFY
-#define CONFIG_MX_CYCLIC
-
-/* U-Boot general configuration */
-#define CONFIG_BOOTFILE		"uImage"	/* Boot file name */
-#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */
-#define CONFIG_SYS_PBSIZE			/* Print buffer size */ \
-		(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
-#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
-#define CONFIG_SYS_HUSH_PARSER
-#define CONFIG_SYS_LONGHELP
-
-#define CONFIG_MENU
-#define CONFIG_MENU_SHOW
-#define CONFIG_FIT
-#define CONFIG_BOARD_IMG_ADDR_R 0x80000000
-
-#ifdef CONFIG_NAND_DAVINCI
-#define CONFIG_ENV_SIZE			(16 << 10)
-#define CONFIG_ENV_IS_IN_NAND
-#define CONFIG_ENV_OFFSET		0x180000
-#define CONFIG_ENV_RANGE		0x040000
-#define CONFIG_ENV_OFFSET_REDUND	0x1c0000
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#if defined(CONFIG_MMC) && !defined(CONFIG_ENV_IS_IN_NAND)
-#define CONFIG_CMD_ENV
-#define CONFIG_SYS_MMC_ENV_DEV	0
-#define CONFIG_ENV_SIZE		(16 << 10)	/* 16 KiB */
-#define CONFIG_ENV_OFFSET	(51 << 9)	/* Sector 51 */
-#define CONFIG_ENV_IS_IN_MMC
-#undef CONFIG_ENV_IS_IN_FLASH
-#endif
-
-#define CONFIG_BOOTDELAY	3
-/*
- * 24MHz InputClock / 15 prediv -> 1.6 MHz timer running
- * Timeout 1 second.
- */
-#define CONFIG_AIT_TIMER_TIMEOUT	0x186a00
-
-#define CONFIG_CMDLINE_EDITING
-#define CONFIG_VERSION_VARIABLE
-#define CONFIG_TIMESTAMP
-
-/* U-Boot memory configuration */
-#define CONFIG_SYS_MALLOC_LEN		(1 << 20)	/* 1 MiB */
-#define CONFIG_SYS_MEMTEST_START	0x80000000	/* physical address */
-#define CONFIG_SYS_MEMTEST_END		0x81000000	/* test 16MB RAM */
-
-/* Linux interfacing */
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_SYS_BARGSIZE	1024			/* bootarg Size */
-#define CONFIG_SYS_LOAD_ADDR	0x80700000		/* kernel address */
-
-#define MTDIDS_DEFAULT		"nand0=davinci_nand.0"
-#define MTDPARTS_DEFAULT			\
-	"mtdparts="				\
-		"davinci_nand.0:"		\
-			"128k(spl),"		\
-			"384k(UBLheader),"	\
-			"1m(u-boot),"		\
-			"512k(env),"		\
-			"-(ubi)"
-
-#define CONFIG_SYS_NAND_PAGE_SIZE	0x800
-#define CONFIG_SYS_NAND_BLOCK_SIZE	0x20000
-
-/* Defines for SPL */
-#define CONFIG_SPL_FRAMEWORK
-#define CONFIG_SPL_BOARD_INIT
-#define CONFIG_SPL_LIBGENERIC_SUPPORT
-#define CONFIG_SPL_NAND_SUPPORT
-#define CONFIG_SPL_NAND_BASE
-#define CONFIG_SPL_NAND_DRIVERS
-#define CONFIG_SPL_NAND_ECC
-#define CONFIG_SPL_NAND_SIMPLE
-#define CONFIG_SYS_NAND_HW_ECC_OOBFIRST
-#define CONFIG_SPL_SERIAL_SUPPORT
-#define CONFIG_SPL_POST_MEM_SUPPORT
-#define CONFIG_SPL_LDSCRIPT		"$(BOARDDIR)/u-boot-spl.lds"
-#define CONFIG_SPL_STACK		(0x00010000 + 0x7f00)
-
-#define CONFIG_SPL_TEXT_BASE		0x00000020 /*CONFIG_SYS_SRAM_START*/
-/* Provide at least 16MB spacing between us and the Linux Kernel image */
-#define CONFIG_SPL_PAD_TO		12320
-#define CONFIG_SPL_MAX_FOOTPRINT	12288
-
-#ifndef CONFIG_SPL_BUILD
-#define CONFIG_SYS_TEXT_BASE		0x81080000
-#endif
-
-#define CONFIG_SYS_NAND_BASE		0x02000000
-#define CONFIG_SYS_NAND_PAGE_COUNT	(CONFIG_SYS_NAND_BLOCK_SIZE / \
-					CONFIG_SYS_NAND_PAGE_SIZE)
-
-#define CONFIG_SYS_NAND_ECCPOS		{				\
-				24, 25, 26, 27, 28,			\
-				29, 30, 31, 32, 33, 34, 35, 36, 37, 38,	\
-				39, 40, 41, 42, 43, 44, 45, 46, 47, 48,	\
-				49, 50, 51, 52, 53, 54, 55, 56, 57, 58,	\
-				59, 60, 61, 62, 63 }
-#define CONFIG_SYS_NAND_BAD_BLOCK_POS	0
-#define CONFIG_SYS_NAND_ECCSIZE		0x200
-#define CONFIG_SYS_NAND_ECCBYTES	10
-#define CONFIG_SYS_NAND_MAX_OOBFREE	2
-#define CONFIG_SYS_NAND_MAX_ECCPOS	56
-#define CONFIG_SYS_NAND_OOBSIZE		64
-#define CONFIG_SYS_NAND_5_ADDR_CYCLE
-
-/*
- * RBL searches from Block n (n = 1..24)
- * so we can define, how many UBL Headers
- * we can write before the real spl code
- */
-#define CONFIG_SYS_NROF_PAGES_NAND_SPL	6
-
-#define CONFIG_SYS_NAND_U_BOOT_DST	0x81080000 /* u-boot TEXT_BASE */
-#define CONFIG_SYS_NAND_U_BOOT_START	CONFIG_SYS_NAND_U_BOOT_DST
-
-/*
- * Post tests for memory testing
- */
-#define CONFIG_POST	CONFIG_SYS_POST_MEMORY
-#define _POST_WORD_ADDR	0x0
-
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SPL_STACK
-
-#define CONFIG_SYS_NAND_U_BOOT_OFFS	0x80000
-#define CONFIG_SYS_NAND_U_BOOT_SIZE	0xa0000
-#define CONFIG_SYS_NAND_U_BOOT_ERA_SIZE	0x100000
-
-/* for UBL header */
-#define CONFIG_SYS_UBL_BLOCK		(CONFIG_SYS_NAND_PAGE_SIZE)
-
-#define CONFIG_SYS_DM36x_PLL1_PLLM	0x55
-#define CONFIG_SYS_DM36x_PLL1_PREDIV	0x8005
-#define CONFIG_SYS_DM36x_PLL2_PLLM	0x09
-#define CONFIG_SYS_DM36x_PLL2_PREDIV	0x8000
-#define CONFIG_SYS_DM36x_PERI_CLK_CTRL	0x243F04FC
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV1	0x801b
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV2	0x8001
-/* POST DIV 680/2 = 340Mhz  -> MJCP and HDVICP bus interface clock */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV3	0x8001
-/*
- * POST DIV 680/4 = 170Mhz  -> EDMA/Peripheral CFG0(1/2 MJCP/HDVICP bus
- * interface clk)
- */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV4	0x8003
-/* POST DIV 680/2 = 340Mhz  -> VPSS */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV5	0x8001
-/* POST DIV 680/9 = 75.6 Mhz -> VENC */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV6	0x8008
-/*
- * POST DIV 680/1 = 680Mhz -> DDRx2(with internal divider of 2, clock boils
- * down to 340 Mhz)
- */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV7	0x8000
-/* POST DIV 680/7= 97Mhz-> MMC0/SD0 */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV8	0x8006
-/* POST DIV 680/28 = 24.3Mhz-> CLKOUT */
-#define CONFIG_SYS_DM36x_PLL1_PLLDIV9	0x801b
-
-#define CONFIG_SYS_DM36x_PLL2_PLLDIV1	0x8011
-/* POST DIV 432/1=432 Mhz  -> ARM926/(HDVICP block) clk */
-#define CONFIG_SYS_DM36x_PLL2_PLLDIV2	0x8000
-#define CONFIG_SYS_DM36x_PLL2_PLLDIV3	0x8001
-/* POST DIV 432/21= 20.5714 Mhz->VOICE Codec clk */
-#define CONFIG_SYS_DM36x_PLL2_PLLDIV4	0x8014
-/* POST DIV 432/16=27 Mhz  -> VENC(For SD modes, requires) */
-#define CONFIG_SYS_DM36x_PLL2_PLLDIV5	0x800f
-
-/*
- * READ LATENCY 7 (CL + 2)
- * CONFIG_PWRDNEN = 1
- * CONFIG_EXT_STRBEN = 1
- */
-#define CONFIG_SYS_DM36x_DDR2_DDRPHYCR	(0 \
-	| DV_DDR_PHY_EXT_STRBEN \
-	| DV_DDR_PHY_PWRDNEN \
-	| (7 << DV_DDR_PHY_RD_LATENCY_SHIFT))
-
-/*
- * T_RFC = (trfc/DDR_CLK) - 1 = (195 / 2.941) - 1
- * T_RP  = (trp/DDR_CLK) - 1  = (12.5 / 2.941) - 1
- * T_RCD = (trcd/DDR_CLK) - 1 = (12.5 / 2.941) - 1
- * T_WR  = (twr/DDR_CLK) - 1  = (15 / 2.941) - 1
- * T_RAS = (tras/DDR_CLK) - 1 = (45 / 2.941) - 1
- * T_RC  = (trc/DDR_CLK) - 1  = (57.5 / 2.941) - 1
- * T_RRD = (trrd/DDR_CLK) - 1 = (7.5 / 2.941) - 1
- * T_WTR = (twtr/DDR_CLK) - 1 = (7.5 / 2.941) - 1
- */
-#define CONFIG_SYS_DM36x_DDR2_SDTIMR	(0 \
-	| (66 << DV_DDR_SDTMR1_RFC_SHIFT) \
-	| (4  << DV_DDR_SDTMR1_RP_SHIFT) \
-	| (4  << DV_DDR_SDTMR1_RCD_SHIFT) \
-	| (5  << DV_DDR_SDTMR1_WR_SHIFT) \
-	| (14 << DV_DDR_SDTMR1_RAS_SHIFT) \
-	| (19 << DV_DDR_SDTMR1_RC_SHIFT) \
-	| (2  << DV_DDR_SDTMR1_RRD_SHIFT) \
-	| (2  << DV_DDR_SDTMR1_WTR_SHIFT))
-
-/*
- * T_RASMAX = (trasmax/refresh_rate) - 1 = (70K / 7812.6) - 1
- * T_XP  = tCKE - 1 = 3 - 2
- * T_XSNR= ((trfc + 10)/DDR_CLK) - 1 = (205 / 2.941) - 1
- * T_XSRD = txsrd - 1 = 200 - 1
- * T_RTP = (trtp/DDR_CLK) - 1 = (7.5 / 2.941) - 1
- * T_CKE = tcke - 1     = 3 - 1
- */
-#define CONFIG_SYS_DM36x_DDR2_SDTIMR2	(0 \
-	| (8  << DV_DDR_SDTMR2_RASMAX_SHIFT) \
-	| (2  << DV_DDR_SDTMR2_XP_SHIFT) \
-	| (69 << DV_DDR_SDTMR2_XSNR_SHIFT) \
-	| (199 <<  DV_DDR_SDTMR2_XSRD_SHIFT) \
-	| (2 <<  DV_DDR_SDTMR2_RTP_SHIFT) \
-	| (2 <<  DV_DDR_SDTMR2_CKE_SHIFT))
-
-/* PR_OLD_COUNT = 0xfe */
-#define CONFIG_SYS_DM36x_DDR2_PBBPR	0x000000FE
-/* refresh rate = 0x768 */
-#define CONFIG_SYS_DM36x_DDR2_SDRCR	0x00000768
-
-#define CONFIG_SYS_DM36x_DDR2_SDBCR	(0 \
-	| (2 << DV_DDR_SDCR_PAGESIZE_SHIFT) \
-	| (3 << DV_DDR_SDCR_IBANK_SHIFT) \
-	| (5 << DV_DDR_SDCR_CL_SHIFT) \
-	| (1 << DV_DDR_SDCR_BUS_WIDTH_SHIFT)	\
-	| (1 << DV_DDR_SDCR_TIMUNLOCK_SHIFT) \
-	| (1 << DV_DDR_SDCR_DDREN_SHIFT) \
-	| (0 << DV_DDR_SDCR_DDRDRIVE0_SHIFT)	\
-	| (1 << DV_DDR_SDCR_DDR2EN_SHIFT) \
-	| (1 << DV_DDR_SDCR_DDR_DDQS_SHIFT) \
-	| (1 << DV_DDR_SDCR_BOOTUNLOCK_SHIFT))
-
-#define CONFIG_SYS_DM36x_AWCCR	0xff
-#define CONFIG_SYS_DM36x_AB1CR	0x40400204
-#define CONFIG_SYS_DM36x_AB2CR	0x04ca2650
-
-/* All Video Inputs */
-#define CONFIG_SYS_DM36x_PINMUX0	0x00000000
-/*
- * All Video Outputs,
- * GPIO 86, 87 + 90 0x0000f030
- */
-#define CONFIG_SYS_DM36x_PINMUX1	0x00530002
-#define CONFIG_SYS_DM36x_PINMUX2	0x00001815
-/*
- * SPI1, UART1, I2C, SD0, SD1, McBSP0, CLKOUTs
- * GPIO 25 0x60000000
- */
-#define CONFIG_SYS_DM36x_PINMUX3	0x9b5affff
-/*
- * MMC/SD0 instead of MS, SPI0
- * GPIO 34 0x0000c000
- */
-#define CONFIG_SYS_DM36x_PINMUX4	0x00002655
-
-/*
- * Default environment settings
- */
-
-#define DVN4XX_UBOOT_ADDR_R_RAM		0x80000000
-/* (DVN4XX_UBOOT_ADDR_R_RAM + CONFIG_SYS_NAND_PAGE_SIZE) */
-#define DVN4XX_UBOOT_ADDR_R_NAND_SPL	0x80000800
-/*
- * (DVN4XX_UBOOT_ADDR_R_NAND_SPL + (CONFIG_SYS_NROF_PAGES_NAND_SPL * \
- * CONFIG_SYS_NAND_PAGE_SIZE))
- */
-#define DVN4XX_UBOOT_ADDR_R_UBOOT	0x80003800
-
-#define	CONFIG_EXTRA_ENV_SETTINGS					\
-	"u_boot_addr_r=" __stringify(DVN4XX_UBOOT_ADDR_R_RAM) "\0"	\
-	"u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.ubl\0"		\
-	"load=tftp ${u_boot_addr_r} ${u-boot}\0"			\
-	"pagesz=" __stringify(CONFIG_SYS_NAND_PAGE_SIZE) "\0"		\
-	"writeheader=nandrbl rbl;nand erase 20000 ${pagesz};"		\
-		"nand write ${u_boot_addr_r} 20000 ${pagesz};"		\
-		"nandrbl uboot\0"					\
-	"writenand_spl=nandrbl rbl;nand erase 0 3000;"			\
-		"nand write " __stringify(DVN4XX_UBOOT_ADDR_R_NAND_SPL)	\
-		" 0 3000;nandrbl uboot\0"				\
-	"writeuboot=nandrbl uboot;"					\
-		"nand erase " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "\
-		 __stringify(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE)		\
-		";nand write " __stringify(DVN4XX_UBOOT_ADDR_R_UBOOT)	\
-		" " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "	\
-		__stringify(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0"		\
-	"update=run load writenand_spl writeuboot\0"			\
-	"bootcmd=run net_nfs\0"						\
-	"rootpath=/opt/eldk-arm/arm\0"					\
-	"mtdids=" MTDIDS_DEFAULT "\0"					\
-	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
-	"netdev=eth0\0"							\
-	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
-	"addmisc=setenv bootargs ${bootargs} app_reset=${app_reset}\0"	\
-	"addcon=setenv bootargs ${bootargs} console=ttyS0,"		\
-		"${baudrate}n8\0"					\
-	"addip=setenv bootargs ${bootargs} "				\
-		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
-		":${hostname}:${netdev}:off eth=${ethaddr} panic=1\0"	\
-	"rootpath=/opt/eldk-arm/arm\0"					\
-	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
-		"nfsroot=${serverip}:${rootpath}\0"			\
-	"bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage \0"		\
-	"kernel_addr_r=80600000\0"					\
-	"load_kernel=tftp ${kernel_addr_r} ${bootfile}\0"		\
-	"ubi_load_kernel=ubi part ubi 2048;ubifsmount ubi:${img_volume};" \
-		"ubifsload ${kernel_addr_r} boot/uImage\0"		\
-	"fit_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0"		\
-	"img_addr_r=" __stringify(CONFIG_BOARD_IMG_ADDR_R) "\0"		\
-	"img_file=" __stringify(CONFIG_HOSTNAME) "/ait.itb\0"		\
-	"header_addr=20000\0"						\
-	"img_writeheader=nandrbl rbl;"					\
-		"nand erase ${header_addr} ${pagesz};"			\
-		"nand write ${img_addr_r} ${header_addr} ${pagesz};"	\
-		"nandrbl uboot\0"					\
-	"img_writespl=nandrbl rbl;nand erase 0 3000;"			\
-		"nand write ${img_addr_r} 0 3000;nandrbl uboot\0"	\
-	"img_writeuboot=nandrbl uboot;"					\
-		"nand erase " __stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "\
-		 __stringify(CONFIG_SYS_NAND_U_BOOT_ERA_SIZE)		\
-		";nand write ${img_addr_r} "				\
-		__stringify(CONFIG_SYS_NAND_U_BOOT_OFFS) " "		\
-		__stringify(CONFIG_SYS_NAND_U_BOOT_SIZE) "\0"		\
-	"img_writedfenv=ubi part ubi 2048;"				\
-		"ubi write ${img_addr_r} default ${filesize}\0"		\
-	"img_volume=rootfs1\0"						\
-	"img_writeramdisk=ubi part ubi 2048;"				\
-		"ubi write ${img_addr_r} ${img_volume} ${filesize}\0"	\
-	"load_img=tftp ${fit_addr_r} ${img_file}\0"			\
-	"net_nfs=run load_kernel; "					\
-		"run nfsargs addip addcon addmtd addmisc;"		\
-		"bootm ${kernel_addr_r}\0"				\
-	"ubi_ubi=run ubi_load_kernel; "					\
-		"run ubiargs addip addcon addmtd addmisc;"		\
-		"bootm ${kernel_addr_r}\0"				\
-	"ubiargs=setenv bootargs ubi.mtd=4,2048"			\
-		" root=ubi0:${img_volume} rw rootfstype=ubifs\0"	\
-	"app_reset=no\0"						\
-	"dvn_app_vers=void\0"						\
-	"dvn_boot_vers=void\0"						\
-	"savenewvers=run savetmpparms restoreparms; saveenv;"		\
-		"run restoretmpparms\0"					\
-	"savetmpparms=setenv y_ipaddr ${ipaddr};"			\
-		"setenv y_netmask ${netmask};"				\
-		"setenv y_serverip ${serverip};"			\
-		"setenv y_gatewayip ${gatewayip}\0"			\
-	"saveparms=setenv x_ipaddr ${ipaddr};"				\
-		"setenv x_netmask ${netmask};"				\
-		"setenv x_serverip ${serverip};"			\
-		"setenv x_gatewayip ${gatewayip}\0"			\
-	"restoreparms=setenv ipaddr ${x_ipaddr};"			\
-		"setenv netmask ${x_netmask};"				\
-		"setenv serverip ${x_serverip};"			\
-		"setenv gatewayip ${x_gatewayip}\0"			\
-	"restoretmpparms=setenv ipaddr ${y_ipaddr};"			\
-		"setenv netmask ${y_netmask};"				\
-		"setenv serverip ${y_serverip};"			\
-		"setenv gatewayip ${y_gatewayip}\0"			\
-	"\0"
-
-/* USB Configuration */
-#define CONFIG_USB_DAVINCI
-#define CONFIG_USB_MUSB_HCD
-#define CONFIG_DV_USBPHY_CTL (USBPHY_SESNDEN | USBPHY_VBDTCTEN | \
-				USBPHY_PHY24MHZ)
-
-#define CONFIG_CMD_USB         /* include support for usb cmd */
-#define CONFIG_USB_STORAGE     /* MSC class support */
-#define CONFIG_CMD_STORAGE     /* inclue support for usb-storage cmd */
-#define CONFIG_CMD_FAT         /* inclue support for FAT/storage */
-#define CONFIG_DOS_PARTITION   /* inclue support for FAT/storage */
-
-#undef DAVINCI_DM365EVM
-#define PINMUX4_USBDRVBUS_BITCLEAR       0x3000
-#define PINMUX4_USBDRVBUS_BITSET         0x2000
-
-#endif /* __CONFIG_H */