OMAP3: Remove unused board-types
The board-types defined in struct omap3_sysinfo seem to be
unused. The function display_board_info() is passed
board type as an argument; which is ignored.
This patch removes all uses of board-type, related definitions
and functions.
Signed-off-by: Sanjeev Premi <premi@ti.com>
diff --git a/board/omap3/beagle/beagle.h b/board/omap3/beagle/beagle.h
index d66f159..5d45f01 100644
--- a/board/omap3/beagle/beagle.h
+++ b/board/omap3/beagle/beagle.h
@@ -24,8 +24,6 @@
#define _BEAGLE_H_
const omap3_sysinfo sysinfo = {
- SDP_3430_V1,
- SDP_3430_V2,
DDR_STACKED,
"OMAP3 Beagle board",
#if defined(CONFIG_ENV_IS_IN_ONENAND)
diff --git a/board/omap3/evm/evm.h b/board/omap3/evm/evm.h
index 199824f..4a82a7f 100644
--- a/board/omap3/evm/evm.h
+++ b/board/omap3/evm/evm.h
@@ -24,8 +24,6 @@
#define _EVM_H_
const omap3_sysinfo sysinfo = {
- OMAP3EVM_V1,
- OMAP3EVM_V2,
DDR_DISCRETE,
"OMAP3 EVM board",
#if defined(CONFIG_ENV_IS_IN_ONENAND)
diff --git a/board/omap3/overo/overo.h b/board/omap3/overo/overo.h
index e8ccc1d..b595f6a 100644
--- a/board/omap3/overo/overo.h
+++ b/board/omap3/overo/overo.h
@@ -24,8 +24,6 @@
#define _OVERO_H_
const omap3_sysinfo sysinfo = {
- SDP_3430_V1,
- SDP_3430_V2,
DDR_STACKED,
"Gumstix Overo board",
#if defined(CONFIG_ENV_IS_IN_ONENAND)
diff --git a/board/omap3/pandora/pandora.h b/board/omap3/pandora/pandora.h
index dd09f12..8f0838c 100644
--- a/board/omap3/pandora/pandora.h
+++ b/board/omap3/pandora/pandora.h
@@ -24,8 +24,6 @@
#define _PANDORA_H_
const omap3_sysinfo sysinfo = {
- SDP_3430_V1,
- SDP_3430_V2,
DDR_STACKED,
"OMAP3 Pandora",
"NAND",
diff --git a/board/omap3/zoom1/zoom1.h b/board/omap3/zoom1/zoom1.h
index bc8fba8..4f49a41 100644
--- a/board/omap3/zoom1/zoom1.h
+++ b/board/omap3/zoom1/zoom1.h
@@ -28,8 +28,6 @@
#define _BOARD_ZOOM1_H_
const omap3_sysinfo sysinfo = {
- SDP_3430_V1,
- SDP_3430_V2,
DDR_STACKED,
"OMAP3 Zoom MDK Rev 1",
"NAND",
diff --git a/cpu/arm_cortexa8/omap3/sys_info.c b/cpu/arm_cortexa8/omap3/sys_info.c
index d605d7c..fb240df 100644
--- a/cpu/arm_cortexa8/omap3/sys_info.c
+++ b/cpu/arm_cortexa8/omap3/sys_info.c
@@ -130,23 +130,6 @@
return offset;
}
-/***********************************************************************
- * get_board_type() - get board type based on current production stats.
- * - NOTE-1-: 2 I2C EEPROMs will someday be populated with proper info.
- * when they are available we can get info from there. This should
- * be correct of all known boards up until today.
- * - NOTE-2- EEPROMs are populated but they are updated very slowly. To
- * avoid waiting on them we will use ES version of the chip to get info.
- * A later version of the FPGA migth solve their speed issue.
- ************************************************************************/
-u32 get_board_type(void)
-{
- if (get_cpu_rev() == CPU_3430_ES2)
- return sysinfo.board_type_v2;
- else
- return sysinfo.board_type_v1;
-}
-
/***************************************************************************
* get_gpmc0_base() - Return current address hardware will be
* fetching from. The below effectively gives what is correct, its a bit
diff --git a/include/asm-arm/arch-omap3/omap3.h b/include/asm-arm/arch-omap3/omap3.h
index 8c9656f..d0d2737 100644
--- a/include/asm-arm/arch-omap3/omap3.h
+++ b/include/asm-arm/arch-omap3/omap3.h
@@ -177,14 +177,6 @@
#define WIDTH_8BIT 0x0000
#define WIDTH_16BIT 0x1000 /* bit pos for 16 bit in gpmc */
-/* SDP definitions according to FPGA Rev. Is this OK?? */
-#define SDP_3430_V1 0x1
-#define SDP_3430_V2 0x2
-
-/* EVM definitions */
-#define OMAP3EVM_V1 0x1
-#define OMAP3EVM_V2 0x2
-
/* I2C power management companion definitions */
#define PWRMGT_ADDR_ID1 0x48
#define PWRMGT_ADDR_ID2 0x49
diff --git a/include/asm-arm/arch-omap3/sys_proto.h b/include/asm-arm/arch-omap3/sys_proto.h
index 830447b..7361d08 100644
--- a/include/asm-arm/arch-omap3/sys_proto.h
+++ b/include/asm-arm/arch-omap3/sys_proto.h
@@ -22,8 +22,6 @@
#define _SYS_PROTO_H_
typedef struct {
- u32 board_type_v1;
- u32 board_type_v2;
u32 mtype;
char *board_string;
char *nand_string;
@@ -46,7 +44,6 @@
u32 is_gpmc_muxed(void);
u32 get_gpmc0_type(void);
u32 get_gpmc0_width(void);
-u32 get_board_type(void);
u32 get_sdr_cs_size(u32);
u32 get_sdr_cs_offset(u32);
u32 is_running_in_sdram(void);