musb-new: Fix reset sequence when in host mode
This commit fixes a number of issues with the reset sequence of musb-new
in host mode:
1) Our usb device probe relies on a second device reset being done after the
first descriptors read. Factor the musb reset code into a usb_reset_root_port
function (and add this as an empty define for other controllers), and call
this when a device has no parent.
2) Just like with normal usb controllers there needs to be a delay after
reset, for normal usb controllers, this is handled in hub_port_reset, add a
delay to usb_reset_root_port.
3) Sync the musb reset sequence with the upstream kernel, clear all bits of
power except bits 4-7, and increase the time reset is asserted to 50 ms.
With these fixes an usb keyboard I have now always enumerates properly, where
as earlier it would only enumerare properly once every 5 tries.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
diff --git a/common/usb.c b/common/usb.c
index 1eda099..32e15cd 100644
--- a/common/usb.c
+++ b/common/usb.c
@@ -970,6 +970,8 @@
printf("\n Couldn't reset port %i\n", dev->portnr);
return 1;
}
+ } else {
+ usb_reset_root_port();
}
#endif
diff --git a/drivers/usb/musb-new/musb_uboot.c b/drivers/usb/musb-new/musb_uboot.c
index 28500bf..dab6f9b 100644
--- a/drivers/usb/musb-new/musb_uboot.c
+++ b/drivers/usb/musb-new/musb_uboot.c
@@ -110,9 +110,27 @@
return submit_urb(&hcd, urb);
}
+void usb_reset_root_port(void)
+{
+ void *mbase = host->mregs;
+ u8 power;
+
+ power = musb_readb(mbase, MUSB_POWER);
+ power &= 0xf0;
+ musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power);
+ mdelay(50);
+ power = musb_readb(mbase, MUSB_POWER);
+ musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power);
+ host->isr(0, host);
+ host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ?
+ USB_SPEED_HIGH :
+ (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_FSDEV) ?
+ USB_SPEED_FULL : USB_SPEED_LOW;
+ mdelay((host_speed == USB_SPEED_LOW) ? 200 : 50);
+}
+
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller)
{
- u8 power;
void *mbase;
/* USB spec says it may take up to 1 second for a device to connect */
unsigned long timeout = get_timer(0) + 1000;
@@ -131,16 +149,7 @@
if (get_timer(0) >= timeout)
return -ENODEV;
- power = musb_readb(mbase, MUSB_POWER);
- musb_writeb(mbase, MUSB_POWER, MUSB_POWER_RESET | power);
- udelay(30000);
- power = musb_readb(mbase, MUSB_POWER);
- musb_writeb(mbase, MUSB_POWER, ~MUSB_POWER_RESET & power);
- host->isr(0, host);
- host_speed = (musb_readb(mbase, MUSB_POWER) & MUSB_POWER_HSMODE) ?
- USB_SPEED_HIGH :
- (musb_readb(mbase, MUSB_DEVCTL) & MUSB_DEVCTL_FSDEV) ?
- USB_SPEED_FULL : USB_SPEED_LOW;
+ usb_reset_root_port();
host->is_active = 1;
hcd.hcd_priv = host;
diff --git a/include/usb.h b/include/usb.h
index b921a7f..a083591 100644
--- a/include/usb.h
+++ b/include/usb.h
@@ -159,6 +159,11 @@
int usb_lowlevel_init(int index, enum usb_init_type init, void **controller);
int usb_lowlevel_stop(int index);
+#ifdef CONFIG_MUSB_HOST
+void usb_reset_root_port(void);
+#else
+#define usb_reset_root_port()
+#endif
int submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int transfer_len);