ns16550: unify serial_rockchip
Unify serial_rockchip, and use the generic binding.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Acked-by: Simon Glass <sjg@chromium.org>
diff --git a/arch/arm/dts/rk3288.dtsi b/arch/arm/dts/rk3288.dtsi
index 0f49709..ac367f8 100644
--- a/arch/arm/dts/rk3288.dtsi
+++ b/arch/arm/dts/rk3288.dtsi
@@ -324,6 +324,7 @@
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ clock-frequency = <24000000>;
clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
@@ -337,6 +338,7 @@
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ clock-frequency = <24000000>;
clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
@@ -350,6 +352,7 @@
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ clock-frequency = <24000000>;
clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
@@ -362,6 +365,7 @@
interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ clock-frequency = <24000000>;
clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
@@ -375,6 +379,7 @@
interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
reg-shift = <2>;
reg-io-width = <4>;
+ clock-frequency = <24000000>;
clocks = <&cru SCLK_UART4>, <&cru PCLK_UART4>;
clock-names = "baudclk", "apb_pclk";
pinctrl-names = "default";
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index ab50f4e..3f7dc8e 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -33,9 +33,6 @@
config DM_GPIO
default y
-config ROCKCHIP_SERIAL
- default y
-
source "arch/arm/mach-rockchip/rk3288/Kconfig"
endif
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index b41f508..1239416 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -186,19 +186,10 @@
Select this to enable an UART for Altera devices. Please find
details on the "Embedded Peripherals IP User Guide" of Altera.
-config ROCKCHIP_SERIAL
- bool "Rockchip on-chip UART support"
- depends on ARCH_ROCKCHIP && DM_SERIAL
- help
- Select this to enable a debug UART for Rockchip devices. This uses
- the ns16550 driver. You will need to #define CONFIG_SYS_NS16550 in
- your board config header. The clock input is automatically set to
- use the oscillator (24MHz).
-
config NS16550_SERIAL
bool "NS16550 UART or compatible"
depends on DM_SERIAL
- default y if X86 || PPC
+ default y if X86 || PPC || ARCH_ROCKCHIP
help
Support NS16550 UART or compatible with driver model. This can be
enabled in the device tree with the correct input clock frequency.
diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile
index 9f61113..debc175 100644
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -40,7 +40,6 @@
obj-$(CONFIG_BFIN_SERIAL) += serial_bfin.o
obj-$(CONFIG_FSL_LPUART) += serial_lpuart.o
obj-$(CONFIG_MXS_AUART) += mxs_auart.o
-obj-$(CONFIG_ROCKCHIP_SERIAL) += serial_rockchip.o
obj-$(CONFIG_ARC_SERIAL) += serial_arc.o
obj-$(CONFIG_TEGRA_SERIAL) += serial_tegra.o
obj-$(CONFIG_UNIPHIER_SERIAL) += serial_uniphier.o
diff --git a/drivers/serial/serial_rockchip.c b/drivers/serial/serial_rockchip.c
deleted file mode 100644
index 0e7bbfc..0000000
--- a/drivers/serial/serial_rockchip.c
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- * Copyright (c) 2015 Google, Inc
- *
- * SPDX-License-Identifier: GPL-2.0+
- */
-
-#include <common.h>
-#include <dm.h>
-#include <ns16550.h>
-#include <serial.h>
-#include <asm/arch/clock.h>
-
-static const struct udevice_id rockchip_serial_ids[] = {
- { .compatible = "rockchip,rk3288-uart" },
- { }
-};
-
-static int rockchip_serial_ofdata_to_platdata(struct udevice *dev)
-{
- struct ns16550_platdata *plat = dev_get_platdata(dev);
- int ret;
-
- ret = ns16550_serial_ofdata_to_platdata(dev);
- if (ret)
- return ret;
-
- /* Do all Rockchip parts use 24MHz? */
- plat->clock = 24 * 1000000;
-
- return 0;
-}
-
-U_BOOT_DRIVER(serial_ns16550) = {
- .name = "serial_rockchip",
- .id = UCLASS_SERIAL,
- .of_match = rockchip_serial_ids,
- .ofdata_to_platdata = rockchip_serial_ofdata_to_platdata,
- .platdata_auto_alloc_size = sizeof(struct ns16550_platdata),
- .priv_auto_alloc_size = sizeof(struct NS16550),
- .probe = ns16550_serial_probe,
- .ops = &ns16550_serial_ops,
- .flags = DM_FLAG_PRE_RELOC,
-};