iomux-v3: Add support for mx6sl LVE bit
On mx6sl there is a LVE (Low Voltage Enable) bit in the IOMUXC_SW_PAD_CTL
register that can enable or disable low voltage on the pad.
LVE is bit 22 of IOMUXC_SW_PAD_CTL register, but in order to make the
calculation easier we can define it as a flag in bit 1, since this bit is unused.
Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Tested-by: Otavio Salvador <otavio@ossystems.com.br>
diff --git a/arch/arm/imx-common/iomux-v3.c b/arch/arm/imx-common/iomux-v3.c
index b59b802..6e46ea8 100644
--- a/arch/arm/imx-common/iomux-v3.c
+++ b/arch/arm/imx-common/iomux-v3.c
@@ -30,6 +30,14 @@
(pad & MUX_PAD_CTRL_OFS_MASK) >> MUX_PAD_CTRL_OFS_SHIFT;
u32 pad_ctrl = (pad & MUX_PAD_CTRL_MASK) >> MUX_PAD_CTRL_SHIFT;
+#if defined CONFIG_MX6SL
+ /* Check whether LVE bit needs to be set */
+ if (pad_ctrl & PAD_CTL_LVE) {
+ pad_ctrl &= ~PAD_CTL_LVE;
+ pad_ctrl |= PAD_CTL_LVE_BIT;
+ }
+#endif
+
if (mux_ctrl_ofs)
__raw_writel(mux_mode, base + mux_ctrl_ofs);
diff --git a/arch/arm/include/asm/imx-common/iomux-v3.h b/arch/arm/include/asm/imx-common/iomux-v3.h
index dec11a1..cca920b 100644
--- a/arch/arm/include/asm/imx-common/iomux-v3.h
+++ b/arch/arm/include/asm/imx-common/iomux-v3.h
@@ -111,6 +111,11 @@
#define PAD_CTL_DSE_40ohm (6 << 3)
#define PAD_CTL_DSE_34ohm (7 << 3)
+#if defined CONFIG_MX6SL
+#define PAD_CTL_LVE (1 << 1)
+#define PAD_CTL_LVE_BIT (1 << 22)
+#endif
+
#elif defined(CONFIG_VF610)
#define PAD_MUX_MODE_SHIFT 20