diff --git a/MAINTAINERS b/MAINTAINERS
index a7f9b87..7441aa5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -722,6 +722,7 @@
 	M52277EVB	mcf5227x
 	M5235EVB	mcf52x2
 	M5253DEMO	mcf52x2
+	M53017EVB	mcf532x
 	M5329EVB	mcf532x
 	M5373EVB	mcf532x
 	M54455EVB	mcf5445x
diff --git a/MAKEALL b/MAKEALL
index 1f56ac5..947d45e 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -709,6 +709,7 @@
 	M5272C3			\
 	M5275EVB		\
 	M5282EVB		\
+	M53017EVB		\
 	M5329AFEE		\
 	M5373EVB		\
 	M54451EVB		\
diff --git a/Makefile b/Makefile
index 983a3cd..587a530 100644
--- a/Makefile
+++ b/Makefile
@@ -1932,7 +1932,27 @@
 ## Coldfire
 #########################################################################
 
-M52277EVB_config:	unconfig
+M52277EVB_config \
+M52277EVB_spansion_config \
+M52277EVB_stmicro_config :	unconfig
+	@case "$@" in \
+	M52277EVB_config)		FLASH=SPANSION;; \
+	M52277EVB_spansion_config)	FLASH=SPANSION;; \
+	M52277EVB_stmicro_config)	FLASH=STMICRO;; \
+	esac; \
+	if [ "$${FLASH}" = "SPANSION" ] ; then \
+		echo "#define CONFIG_SYS_SPANSION_BOOT"	>> $(obj)include/config.h ; \
+		echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+		cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
+		$(XECHO) "... with SPANSION boot..." ; \
+	fi; \
+	if [ "$${FLASH}" = "STMICRO" ] ; then \
+		echo "#define CONFIG_CF_SBF"	>> $(obj)include/config.h ; \
+		echo "#define CONFIG_SYS_STMICRO_BOOT"	>> $(obj)include/config.h ; \
+		echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+		cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
+		$(XECHO) "... with ST Micro boot..." ; \
+	fi
 	@$(MKCONFIG) -a M52277EVB m68k mcf5227x m52277evb freescale
 
 M5235EVB_config \
@@ -1992,6 +2012,9 @@
 M5282EVB_config :		unconfig
 	@$(MKCONFIG) $(@:_config=) m68k mcf52x2 m5282evb freescale
 
+M53017EVB_config :		unconfig
+	@$(MKCONFIG) $(@:_config=) m68k mcf532x m53017evb freescale
+
 M5329AFEE_config \
 M5329BFEE_config :	unconfig
 	@case "$@" in \
diff --git a/board/BuS/EB+MCF-EV123/Makefile b/board/BuS/EB+MCF-EV123/Makefile
index ceeffa7..ed3ac07 100644
--- a/board/BuS/EB+MCF-EV123/Makefile
+++ b/board/BuS/EB+MCF-EV123/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o mii.o
+COBJS	= $(BOARD).o cfm_flash.o flash.o VCxK.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/BuS/EB+MCF-EV123/mii.c b/board/BuS/EB+MCF-EV123/mii.c
deleted file mode 100644
index 7f92514..0000000
--- a/board/BuS/EB+MCF-EV123/mii.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		MCFGPIO_PASPAR |= 0x0F00;
-		MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
-	} else {
-		MCFGPIO_PASPAR &= 0xF0FF;
-		MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/cobra5272/Makefile b/board/cobra5272/Makefile
index be704b7..cf07cf4 100644
--- a/board/cobra5272/Makefile
+++ b/board/cobra5272/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o flash.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/cobra5272/mii.c b/board/cobra5272/mii.c
deleted file mode 100644
index 161c694..0000000
--- a/board/cobra5272/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
-	} else {
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m52277evb/config.mk b/board/freescale/m52277evb/config.mk
index ce014ed..b42fcc9 100644
--- a/board/freescale/m52277evb/config.mk
+++ b/board/freescale/m52277evb/config.mk
@@ -22,4 +22,6 @@
 # MA 02111-1307 USA
 #
 
-TEXT_BASE = 0
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
diff --git a/board/freescale/m52277evb/m52277evb.c b/board/freescale/m52277evb/m52277evb.c
index 838a6de..9109edb 100644
--- a/board/freescale/m52277evb/m52277evb.c
+++ b/board/freescale/m52277evb/m52277evb.c
@@ -38,8 +38,18 @@
 
 phys_size_t initdram(int board_type)
 {
+	u32 dramsize;
+
+#ifdef CONFIG_CF_SBF
+	/*
+	 * Serial Boot: The dram is already initialized in start.S
+	 * only require to return DRAM size
+	 */
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+#else
 	volatile sdramc_t *sdram = (volatile sdramc_t *)(MMAP_SDRAM);
-	u32 dramsize, i;
+	volatile gpio_t *gpio = (volatile gpio_t *)(MMAP_GPIO);
+	u32 i;
 
 	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
 
@@ -49,6 +59,8 @@
 	}
 	i--;
 
+	gpio->mscr_sdram = CONFIG_SYS_SDRAM_DRV_STRENGTH;
+
 	sdram->sdcs0 = (CONFIG_SYS_SDRAM_BASE | i);
 
 	sdram->sdcfg1 = CONFIG_SYS_SDRAM_CFG1;
@@ -56,24 +68,30 @@
 
 	/* Issue PALL */
 	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+	__asm__("nop");
 
 	/* Issue LEMR */
-	/*sdram->sdmr = CONFIG_SYS_SDRAM_EMOD; */
 	sdram->sdmr = CONFIG_SYS_SDRAM_MODE;
+	__asm__("nop");
+	sdram->sdmr = CONFIG_SYS_SDRAM_EMOD;
+	__asm__("nop");
 
 	udelay(1000);
 
 	/* Issue PALL */
 	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 2;
+	__asm__("nop");
 
 	/* Perform two refresh cycles */
 	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+	__asm__("nop");
 	sdram->sdcr = CONFIG_SYS_SDRAM_CTRL | 4;
+	__asm__("nop");
 
-	sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000c00;
+	sdram->sdcr = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000C00;
 
 	udelay(100);
-
+#endif
 	return (dramsize);
 };
 
diff --git a/board/freescale/m52277evb/u-boot.lds b/board/freescale/m52277evb/u-boot.spa
similarity index 100%
rename from board/freescale/m52277evb/u-boot.lds
rename to board/freescale/m52277evb/u-boot.spa
diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m52277evb/u-boot.stm
similarity index 87%
copy from board/freescale/m54455evb/u-boot.lds
copy to board/freescale/m52277evb/u-boot.stm
index bcf30c3..03ff532 100644
--- a/board/freescale/m54455evb/u-boot.lds
+++ b/board/freescale/m52277evb/u-boot.stm
@@ -33,11 +33,11 @@
   .dynsym        : { *(.dynsym)		}
   .dynstr        : { *(.dynstr)		}
   .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
+  .rela.text     : { *(.rela.text) 	}
   .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
   .rel.got       : { *(.rel.got)		}
   .rela.got      : { *(.rela.got)		}
   .rel.ctors     : { *(.rel.ctors)	}
@@ -55,14 +55,7 @@
     /* WARNING - the following is hand-optimized to fit within	*/
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
-    cpu/mcf5445x/start.o		(.text)
-    lib_m68k/traps.o		(.text)
-    lib_m68k/interrupts.o	(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/env_embedded.o	(.text)
+    cpu/mcf5227x/start.o		(.text)
 
     *(.text)
     *(.fixup)
@@ -128,7 +121,7 @@
   __init_end = .;
 
   __bss_start = .;
-  .bss (NOLOAD)       :
+  .bss       :
   {
    _sbss = .;
    *(.sbss) *(.scommon)
diff --git a/board/freescale/m5235evb/Makefile b/board/freescale/m5235evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m5235evb/Makefile
+++ b/board/freescale/m5235evb/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5235evb/mii.c b/board/freescale/m5235evb/mii.c
deleted file mode 100644
index 5fbbd66..0000000
--- a/board/freescale/m5235evb/mii.c
+++ /dev/null
@@ -1,307 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO);
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK);
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5235evb/u-boot.lds b/board/freescale/m5235evb/u-boot.lds
deleted file mode 100644
index c0611b9..0000000
--- a/board/freescale/m5235evb/u-boot.lds
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(m68k)
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text)	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data)	}
-  .rel.rodata    : { *(.rel.rodata)	}
-  .rela.rodata   : { *(.rela.rodata)	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/mcf523x/start.o		(.text)
-    cpu/mcf523x/cpu_init.o	(.text)
-    lib_m68k/traps.o		(.text)
-    lib_m68k/interrupts.o	(.text)
-    common/dlmalloc.o		(.text)
-    lib_generic/zlib.o		(.text)
-
-    . = DEFINED(env_offset) ? env_offset : .;
-    common/env_embedded.o	(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x00FF) & 0xFFFFFF00;
-  _erotext = .;
-  PROVIDE (erotext = .);
-
-  .reloc   :
-  {
-    __got_start = .;
-    *(.got)
-    __got_end = .;
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  . = .;
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  . = .;
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss (NOLOAD)       :
-  {
-   _sbss = .;
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-   . = ALIGN(4);
-   _ebss = .;
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/freescale/m5271evb/Makefile b/board/freescale/m5271evb/Makefile
index 2ec71ee..424ab1c 100644
--- a/board/freescale/m5271evb/Makefile
+++ b/board/freescale/m5271evb/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5271evb/mii.c b/board/freescale/m5271evb/mii.c
deleted file mode 100644
index e79fa19..0000000
--- a/board/freescale/m5271evb/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		/* Enable Ethernet pins */
-		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C);
-	} else {
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5272c3/Makefile b/board/freescale/m5272c3/Makefile
index be704b7..424ab1c 100644
--- a/board/freescale/m5272c3/Makefile
+++ b/board/freescale/m5272c3/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5272c3/flash.c b/board/freescale/m5272c3/flash.c
deleted file mode 100644
index 586a2cf..0000000
--- a/board/freescale/m5272c3/flash.c
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- * (C) Copyright 2000-2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-
-#define PHYS_FLASH_1 CONFIG_SYS_FLASH_BASE
-#define FLASH_BANK_SIZE 0x200000
-
-flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];
-
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case (AMD_MANUFACT & FLASH_VENDMASK):
-		printf ("AMD: ");
-		break;
-	default:
-		printf ("Unknown Vendor ");
-		break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case (AMD_ID_PL160CB & FLASH_TYPEMASK):
-		printf ("AM29PL160CB (16Mbit)\n");
-		break;
-	default:
-		printf ("Unknown Chip Type\n");
-		goto Done;
-		break;
-	}
-
-	printf ("  Size: %ld MB in %d Sectors\n",
-		info->size >> 20, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; i++) {
-		if ((i % 5) == 0) {
-			printf ("\n   ");
-		}
-		printf (" %08lX%s", info->start[i],
-			info->protect[i] ? " (RO)" : "     ");
-	}
-	printf ("\n");
-
-      Done:
-	return;
-}
-
-
-unsigned long flash_init (void)
-{
-	int i, j;
-	ulong size = 0;
-
-	for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
-		ulong flashbase = 0;
-
-		flash_info[i].flash_id =
-			(AMD_MANUFACT & FLASH_VENDMASK) |
-			(AMD_ID_PL160CB & FLASH_TYPEMASK);
-		flash_info[i].size = FLASH_BANK_SIZE;
-		flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT;
-		memset (flash_info[i].protect, 0, CONFIG_SYS_MAX_FLASH_SECT);
-		if (i == 0)
-			flashbase = PHYS_FLASH_1;
-		else
-			panic ("configured to many flash banks!\n");
-
-		for (j = 0; j < flash_info[i].sector_count; j++) {
-			if (j == 0) {
-				/* 1st is 16 KiB */
-				flash_info[i].start[j] = flashbase;
-			}
-			if ((j >= 1) && (j <= 2)) {
-				/* 2nd and 3rd are 8 KiB */
-				flash_info[i].start[j] =
-					flashbase + 0x4000 + 0x2000 * (j - 1);
-			}
-			if (j == 3) {
-				/* 4th is 224 KiB */
-				flash_info[i].start[j] = flashbase + 0x8000;
-			}
-			if ((j >= 4) && (j <= 10)) {
-				/* rest is 256 KiB */
-				flash_info[i].start[j] =
-					flashbase + 0x40000 + 0x40000 * (j -
-									 4);
-			}
-		}
-		size += flash_info[i].size;
-	}
-
-	flash_protect (FLAG_PROTECT_SET,
-		       CONFIG_SYS_FLASH_BASE,
-		       CONFIG_SYS_FLASH_BASE + 0x3ffff, &flash_info[0]);
-
-	return size;
-}
-
-
-#define CMD_READ_ARRAY		0x00F0
-#define CMD_UNLOCK1		0x00AA
-#define CMD_UNLOCK2		0x0055
-#define CMD_ERASE_SETUP		0x0080
-#define CMD_ERASE_CONFIRM	0x0030
-#define CMD_PROGRAM		0x00A0
-#define CMD_UNLOCK_BYPASS	0x0020
-
-#define MEM_FLASH_ADDR1		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x00000555<<1)))
-#define MEM_FLASH_ADDR2		(*(volatile u16 *)(CONFIG_SYS_FLASH_BASE + (0x000002AA<<1)))
-
-#define BIT_ERASE_DONE		0x0080
-#define BIT_RDY_MASK		0x0080
-#define BIT_PROGRAM_ERROR	0x0020
-#define BIT_TIMEOUT		0x80000000	/* our flag */
-
-#define READY 1
-#define ERR   2
-#define TMO   4
-
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	ulong result;
-	int iflag, cflag, prot, sect;
-	int rc = ERR_OK;
-	int chip1;
-
-	/* first look for protection bits */
-
-	if (info->flash_id == FLASH_UNKNOWN)
-		return ERR_UNKNOWN_FLASH_TYPE;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		return ERR_INVAL;
-	}
-
-	if ((info->flash_id & FLASH_VENDMASK) !=
-	    (AMD_MANUFACT & FLASH_VENDMASK)) {
-		return ERR_UNKNOWN_FLASH_VENDOR;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-	if (prot)
-		return ERR_PROTECTED;
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	printf ("\n");
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
-		printf ("Erasing sector %2d ... ", sect);
-
-		/* arm simple, non interrupt dependent timer */
-		set_timer (0);
-
-		if (info->protect[sect] == 0) {	/* not protected */
-			volatile u16 *addr =
-				(volatile u16 *) (info->start[sect]);
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			MEM_FLASH_ADDR1 = CMD_ERASE_SETUP;
-
-			MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-			MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-			*addr = CMD_ERASE_CONFIRM;
-
-			/* wait until flash is ready */
-			chip1 = 0;
-
-			do {
-				result = *addr;
-
-				/* check timeout */
-				if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-					MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-					chip1 = TMO;
-					break;
-				}
-
-				if (!chip1
-				    && (result & 0xFFFF) & BIT_ERASE_DONE)
-					chip1 = READY;
-
-			} while (!chip1);
-
-			MEM_FLASH_ADDR1 = CMD_READ_ARRAY;
-
-			if (chip1 == ERR) {
-				rc = ERR_PROG_ERROR;
-				goto outahere;
-			}
-			if (chip1 == TMO) {
-				rc = ERR_TIMOUT;
-				goto outahere;
-			}
-
-			printf ("ok.\n");
-		} else {	/* it was protected */
-
-			printf ("protected!\n");
-		}
-	}
-
-	if (ctrlc ())
-		printf ("User Interrupt!\n");
-
-      outahere:
-	/* allow flash to settle - wait 10 ms */
-	udelay (10000);
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile u16 *addr = (volatile u16 *) dest;
-	ulong result;
-	int rc = ERR_OK;
-	int cflag, iflag;
-	int chip1;
-
-	/*
-	 * Check if Flash is (sufficiently) erased
-	 */
-	result = *addr;
-	if ((result & data) != data)
-		return ERR_NOT_ERASED;
-
-
-	/*
-	 * Disable interrupts which might cause a timeout
-	 * here. Remember that our exception vectors are
-	 * at address 0 in the flash, and we don't want a
-	 * (ticker) exception to happen while the flash
-	 * chip is in programming mode.
-	 */
-
-	cflag = icache_status ();
-	icache_disable ();
-	iflag = disable_interrupts ();
-
-	MEM_FLASH_ADDR1 = CMD_UNLOCK1;
-	MEM_FLASH_ADDR2 = CMD_UNLOCK2;
-	MEM_FLASH_ADDR1 = CMD_PROGRAM;
-	*addr = data;
-
-	/* arm simple, non interrupt dependent timer */
-	set_timer (0);
-
-	/* wait until flash is ready */
-	chip1 = 0;
-	do {
-		result = *addr;
-
-		/* check timeout */
-		if (get_timer (0) > CONFIG_SYS_FLASH_ERASE_TOUT) {
-			chip1 = ERR | TMO;
-			break;
-		}
-		if (!chip1 && ((result & 0x80) == (data & 0x80)))
-			chip1 = READY;
-
-	} while (!chip1);
-
-	*addr = CMD_READ_ARRAY;
-
-	if (chip1 == ERR || *addr != data)
-		rc = ERR_PROG_ERROR;
-
-	if (iflag)
-		enable_interrupts ();
-
-	if (cflag)
-		icache_enable ();
-
-	return rc;
-}
-
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong wp, data;
-	int rc;
-
-	if (addr & 1) {
-		printf ("unaligned destination not supported\n");
-		return ERR_ALIGN;
-	}
-
-#if 0
-	if (cnt & 1) {
-		printf ("odd transfer sizes not supported\n");
-		return ERR_ALIGN;
-	}
-#endif
-
-	wp = addr;
-
-	if (addr & 1) {
-		data = (*((volatile u8 *) addr) << 8) | *((volatile u8 *)
-							  src);
-		if ((rc = write_word (info, wp - 1, data)) != 0) {
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	while (cnt >= 2) {
-		data = *((volatile u16 *) src);
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 2;
-		wp += 2;
-		cnt -= 2;
-	}
-
-	if (cnt == 1) {
-		data = (*((volatile u8 *) src) << 8) |
-			*((volatile u8 *) (wp + 1));
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		src += 1;
-		wp += 1;
-		cnt -= 1;
-	}
-
-	return ERR_OK;
-}
diff --git a/board/freescale/m5272c3/mii.c b/board/freescale/m5272c3/mii.c
deleted file mode 100644
index 161c694..0000000
--- a/board/freescale/m5272c3/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER | GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 | GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 | GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
-	} else {
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5275evb/Makefile b/board/freescale/m5275evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m5275evb/Makefile
+++ b/board/freescale/m5275evb/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5275evb/mii.c b/board/freescale/m5275evb/mii.c
deleted file mode 100644
index 706d8d6..0000000
--- a/board/freescale/m5275evb/mii.c
+++ /dev/null
@@ -1,319 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	struct fec_info_s *info = (struct fec_info_s *) dev->priv;
-	volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
-
-	if (setclear) {
-		/* Enable Ethernet pins */
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
-			gpio->par_feci2c |= 0x0F00;
-			gpio->par_fec0hl |= 0xC0;
-		} else {
-			gpio->par_feci2c |= 0x00A0;
-			gpio->par_fec1hl |= 0xC0;
-		}
-	} else {
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
-			gpio->par_feci2c &= ~0x0F00;
-			gpio->par_fec0hl &= ~0xC0;
-		} else {
-			gpio->par_feci2c &= ~0x00A0;
-			gpio->par_fec1hl &= ~0xC0;
-		}
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif	/* CONFIG_SYS_DISCOVER_PHY || (CONFIG_COMMANDS & CONFIG_CMD_MII) */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5282evb/Makefile b/board/freescale/m5282evb/Makefile
index 2ec71ee..424ab1c 100644
--- a/board/freescale/m5282evb/Makefile
+++ b/board/freescale/m5282evb/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5282evb/mii.c b/board/freescale/m5282evb/mii.c
deleted file mode 100644
index 7f92514..0000000
--- a/board/freescale/m5282evb/mii.c
+++ /dev/null
@@ -1,304 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		MCFGPIO_PASPAR |= 0x0F00;
-		MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
-	} else {
-		MCFGPIO_PASPAR &= 0xF0FF;
-		MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_AMD79C874VC	0x0022561B	/* AMD 79C874 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_AMD79C874VC	"AMD79C874VC"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					strcpy(info->phy_name,
-					       STR_ID_AMD79C874VC);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_AMD79C874VC:
-					printf(STR_ID_AMD79C874VC);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m53017evb/Makefile b/board/freescale/m53017evb/Makefile
new file mode 100644
index 0000000..981763d
--- /dev/null
+++ b/board/freescale/m53017evb/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/freescale/m53017evb/config.mk b/board/freescale/m53017evb/config.mk
new file mode 100644
index 0000000..ce014ed
--- /dev/null
+++ b/board/freescale/m53017evb/config.mk
@@ -0,0 +1,25 @@
+#
+# (C) Copyright 2000-2003
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+# Coldfire contribution by Bernhard Kuhn <bkuhn@metrowerks.com>
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+TEXT_BASE = 0
diff --git a/board/freescale/m53017evb/m53017evb.c b/board/freescale/m53017evb/m53017evb.c
new file mode 100644
index 0000000..f331786
--- /dev/null
+++ b/board/freescale/m53017evb/m53017evb.c
@@ -0,0 +1,94 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <asm/immap.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+int checkboard(void)
+{
+	puts("Board: ");
+	puts("Freescale M53017EVB\n");
+	return 0;
+};
+
+phys_size_t initdram(int board_type)
+{
+	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
+	u32 dramsize, i;
+
+	dramsize = CONFIG_SYS_SDRAM_SIZE * 0x100000;
+
+	for (i = 0x13; i < 0x20; i++) {
+		if (dramsize == (1 << i))
+			break;
+	}
+	i--;
+
+	sdram->cs0 = (CONFIG_SYS_SDRAM_BASE | i);
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	sdram->cs1 = (CONFIG_SYS_SDRAM_BASE | i);
+#endif
+	sdram->cfg1 = CONFIG_SYS_SDRAM_CFG1;
+	sdram->cfg2 = CONFIG_SYS_SDRAM_CFG2;
+
+	udelay(500);
+
+	/* Issue PALL */
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+	asm("nop");
+
+	/* Perform two refresh cycles */
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	sdram->ctrl = CONFIG_SYS_SDRAM_CTRL | 4;
+	asm("nop");
+
+	/* Issue LEMR */
+	sdram->mode = CONFIG_SYS_SDRAM_MODE;
+	asm("nop");
+	sdram->mode = CONFIG_SYS_SDRAM_EMOD;
+	asm("nop");
+
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL | 2);
+	asm("nop");
+
+	sdram->ctrl = (CONFIG_SYS_SDRAM_CTRL & ~0x80000000) | 0x10000F00;
+	asm("nop");
+
+	udelay(100);
+
+	return dramsize;
+};
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("DRAM test not implemented!\n");
+
+	return (0);
+}
diff --git a/board/freescale/m54455evb/u-boot.lds b/board/freescale/m53017evb/u-boot.lds
similarity index 96%
rename from board/freescale/m54455evb/u-boot.lds
rename to board/freescale/m53017evb/u-boot.lds
index bcf30c3..dc53141 100644
--- a/board/freescale/m54455evb/u-boot.lds
+++ b/board/freescale/m53017evb/u-boot.lds
@@ -55,9 +55,9 @@
     /* WARNING - the following is hand-optimized to fit within	*/
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
-    cpu/mcf5445x/start.o		(.text)
-    lib_m68k/traps.o		(.text)
-    lib_m68k/interrupts.o	(.text)
+    cpu/mcf532x/start.o		(.text)
+    cpu/mcf532x/libmcf532x.a	(.text)
+    lib_m68k/libm68k.a		(.text)
     common/dlmalloc.o		(.text)
     lib_generic/zlib.o		(.text)
 
diff --git a/board/freescale/m5329evb/Makefile b/board/freescale/m5329evb/Makefile
index ab0f11e..07b693c 100644
--- a/board/freescale/m5329evb/Makefile
+++ b/board/freescale/m5329evb/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o nand.o
+COBJS	= $(BOARD).o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5329evb/mii.c b/board/freescale/m5329evb/mii.c
deleted file mode 100644
index c0f5817..0000000
--- a/board/freescale/m5329evb/mii.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
-		gpio->par_feci2c |=
-		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
-	} else {
-		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5329evb/nand.c b/board/freescale/m5329evb/nand.c
index 82492f6..cf27dda 100644
--- a/board/freescale/m5329evb/nand.c
+++ b/board/freescale/m5329evb/nand.c
@@ -36,56 +36,42 @@
 #include <linux/mtd/mtd.h>
 
 #define SET_CLE		0x10
-#define CLR_CLE		~SET_CLE
 #define SET_ALE		0x08
-#define CLR_ALE		~SET_ALE
 
-static void nand_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *this = mtdinfo->priv;
-/*	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS; TODO: handle wp */
-	u32 nand_baseaddr = (u32) this->IO_ADDR_W;
+	volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		if ( ctrl & NAND_CLE )
-			nand_baseaddr |= SET_CLE;
-		else
-			nand_baseaddr &= CLR_CLE;
-		if ( ctrl & NAND_ALE )
-			nand_baseaddr |= SET_ALE;
-		else
-			nand_baseaddr &= CLR_ALE;
+		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
+
+		IO_ADDR_W &= ~(SET_ALE | SET_CLE);
+		*nCE &= 0xFFFB;
+
+		if (ctrl & NAND_NCE)
+			*nCE |= 0x0004;
+		if (ctrl & NAND_CLE)
+			IO_ADDR_W |= SET_CLE;
+		if (ctrl & NAND_ALE)
+			IO_ADDR_W |= SET_ALE;
+
+		this->IO_ADDR_W = (void *)IO_ADDR_W;
 	}
-	this->IO_ADDR_W = (void __iomem *)(nand_baseaddr);
 
 	if (cmd != NAND_CMD_NONE)
 		writeb(cmd, this->IO_ADDR_W);
 }
 
-static void nand_write_byte(struct mtd_info *mtdinfo, u_char byte)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	*((volatile u8 *)(this->IO_ADDR_W)) = byte;
-}
-
-static u8 nand_read_byte(struct mtd_info *mtdinfo)
-{
-	struct nand_chip *this = mtdinfo->priv;
-	return (u8) (*((volatile u8 *)this->IO_ADDR_R));
-}
-
-static int nand_dev_ready(struct mtd_info *mtdinfo)
-{
-	return 1;
-}
-
 int board_nand_init(struct nand_chip *nand)
 {
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
-	*((volatile u16 *)CONFIG_SYS_LATCH_ADDR) |= 0x0004;
-
-	/* set up pin configuration */
+	/*
+	 * set up pin configuration - enabled 2nd output buffer's signals
+	 * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc)
+	 * to use nCE signal
+	 */
 	gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
 	gpio->pddr_timer |= 0x08;
 	gpio->ppd_timer |= 0x08;
@@ -95,9 +81,6 @@
 	nand->chip_delay = 50;
 	nand->ecc.mode = NAND_ECC_SOFT;
 	nand->cmd_ctrl = nand_hwcontrol;
-	nand->read_byte = nand_read_byte;
-	nand->write_byte = nand_write_byte;
-	nand->dev_ready = nand_dev_ready;
 
 	return 0;
 }
diff --git a/board/freescale/m5373evb/Makefile b/board/freescale/m5373evb/Makefile
index ab0f11e..07b693c 100644
--- a/board/freescale/m5373evb/Makefile
+++ b/board/freescale/m5373evb/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o nand.o
+COBJS	= $(BOARD).o nand.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m5373evb/mii.c b/board/freescale/m5373evb/mii.c
deleted file mode 100644
index c0f5817..0000000
--- a/board/freescale/m5373evb/mii.c
+++ /dev/null
@@ -1,306 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-
-	if (setclear) {
-		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
-		gpio->par_feci2c |=
-		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
-	} else {
-		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m5373evb/nand.c b/board/freescale/m5373evb/nand.c
index d01b819..3ebef05 100644
--- a/board/freescale/m5373evb/nand.c
+++ b/board/freescale/m5373evb/nand.c
@@ -41,19 +41,21 @@
 static void nand_hwcontrol(struct mtd_info *mtdinfo, int cmd, unsigned int ctrl)
 {
 	struct nand_chip *this = mtdinfo->priv;
-	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
-	u32 nand_baseaddr = (u32) this->IO_ADDR_W;
+	volatile u16 *nCE = (u16 *) CONFIG_SYS_LATCH_ADDR;
 
 	if (ctrl & NAND_CTRL_CHANGE) {
 		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
-		IO_ADDR_W &= ~(SET_ALE | SE_CLE);
 
+		IO_ADDR_W &= ~(SET_ALE | SET_CLE);
+		*nCE &= 0xFFFB;
+
+		if (ctrl & NAND_NCE)
+			*nCE |= 0x0004;
 		if (ctrl & NAND_CLE)
 			IO_ADDR_W |= SET_CLE;
 		if (ctrl & NAND_ALE)
 			IO_ADDR_W |= SET_ALE;
 
-		at91_set_gpio_value(AT91_PIN_PD15, !(ctrl & NAND_NCE));
 		this->IO_ADDR_W = (void *)IO_ADDR_W;
 
 	}
@@ -67,10 +69,13 @@
 	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
 
-	*((volatile u16 *)CONFIG_SYS_LATCH_ADDR) |= 0x0004;
 	fbcs->csmr2 &= ~FBCS_CSMR_WP;
 
-	/* set up pin configuration */
+	/*
+	 * set up pin configuration - enabled 2nd output buffer's signals
+	 * (nand_ngpio - nCE USB1/2_PWR_EN, LATCH_GPIOs, LCD_VEEEN, etc)
+	 * to use nCE signal
+	 */
 	gpio->par_timer &= ~GPIO_PAR_TIN3_TIN3;
 	gpio->pddr_timer |= 0x08;
 	gpio->ppd_timer |= 0x08;
diff --git a/board/freescale/m54451evb/Makefile b/board/freescale/m54451evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m54451evb/Makefile
+++ b/board/freescale/m54451evb/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m54451evb/mii.c b/board/freescale/m54451evb/mii.c
deleted file mode 100644
index 6e24736..0000000
--- a/board/freescale/m54451evb/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
-		else
-			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
-		else
-			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_KSZ8041NL	0x00221512
-#define STR_ID_KSZ8041NL	"KSZ8041NL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	struct eth_device *dev;
-	int i, miispd;
-	u16 rst = 0;
-
-	dev = eth_get_dev();
-
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET);
-	for (i = 0; i < FEC_RESET_DELAY; ++i) {
-		udelay(500);
-		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst);
-		if ((rst & PHY_BMCR_RESET) == 0)
-			break;
-	}
-	if (i == FEC_RESET_DELAY)
-		printf("Mii reset timeout %d\n", i);
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KSZ8041NL:
-					strcpy(info->phy_name,
-					       STR_ID_KSZ8041NL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KSZ8041NL:
-					printf(STR_ID_KSZ8041NL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m54455evb/Makefile b/board/freescale/m54455evb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m54455evb/Makefile
+++ b/board/freescale/m54455evb/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m54455evb/mii.c b/board/freescale/m54455evb/mii.c
deleted file mode 100644
index c195191..0000000
--- a/board/freescale/m54455evb/mii.c
+++ /dev/null
@@ -1,324 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
-
-	if (setclear) {
-		gpio->par_feci2c |=
-		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
-		else
-			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
-	} else {
-		gpio->par_feci2c &=
-		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
-
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
-		else
-			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	struct eth_device *dev;
-	int i, miispd;
-	u16 rst = 0;
-
-	dev = eth_get_dev();
-
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	miiphy_write(dev->name, info->phy_addr, PHY_BMCR, PHY_BMCR_RESET);
-	for (i = 0; i < FEC_RESET_DELAY; ++i) {
-		udelay(500);
-		miiphy_read(dev->name, info->phy_addr, PHY_BMCR, &rst);
-		if ((rst & PHY_BMCR_RESET) == 0)
-			break;
-	}
-	if (i == FEC_RESET_DELAY)
-		printf("Mii reset timeout %d\n", i);
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || (CONFIG_MII) */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					strcpy(info->phy_name,
-					       STR_ID_DP83848VV);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_DP83848VV:
-					printf(STR_ID_DP83848VV);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m547xevb/Makefile b/board/freescale/m547xevb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m547xevb/Makefile
+++ b/board/freescale/m547xevb/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m547xevb/mii.c b/board/freescale/m547xevb/mii.c
deleted file mode 100644
index 4d11506..0000000
--- a/board/freescale/m547xevb/mii.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <net.h>
-
-#include <asm/immap.h>
-#include <asm/fec.h>
-#include <asm/fsl_mcdmafec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
-
-	if (setclear) {
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_feci2cirq |= 0xF000;
-		else
-			gpio->par_feci2cirq |= 0x0FC0;
-	} else {
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_feci2cirq &= 0x0FFF;
-		else
-			gpio->par_feci2cirq &= 0xF03F;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_BCM5222		0x00406322	/* Broadcom 5222 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_BCM5222		"BCM5222"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_dma *info)
-{
-	volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	volatile fecdma_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fecdma_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_dma *info = dev->priv;
-	int phyaddr, pass, temp;
-	uint phyno, phytype;
-
-	if (info->phyname_init) {
-		return info->phy_addr;
-	}
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		temp = 0;
-		if (info->index > 0) {
-			/* Some phy have multiple address, to solve the issue
-			   where phyno keeps starting from 0, check the
-			   previous phy address if both miibase are the same. */
-			if (info->miibase == (info->next)->miibase) {
-				temp = (info->next)->phy_addr + 1;
-			}
-		}
-
-		for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					strcpy(info->phy_name, STR_ID_BCM5222);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					printf(STR_ID_BCM5222);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fecdma_t *fecp;
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fecdma_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/freescale/m548xevb/Makefile b/board/freescale/m548xevb/Makefile
index 74c2528..981763d 100644
--- a/board/freescale/m548xevb/Makefile
+++ b/board/freescale/m548xevb/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o mii.o
+COBJS	= $(BOARD).o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/freescale/m548xevb/mii.c b/board/freescale/m548xevb/mii.c
deleted file mode 100644
index 4d11506..0000000
--- a/board/freescale/m548xevb/mii.c
+++ /dev/null
@@ -1,322 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <config.h>
-#include <net.h>
-
-#include <asm/immap.h>
-#include <asm/fec.h>
-#include <asm/fsl_mcdmafec.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
-	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
-
-	if (setclear) {
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_feci2cirq |= 0xF000;
-		else
-			gpio->par_feci2cirq |= 0x0FC0;
-	} else {
-		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
-			gpio->par_feci2cirq &= 0x0FFF;
-		else
-			gpio->par_feci2cirq &= 0xF03F;
-	}
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_BCM5222		0x00406322	/* Broadcom 5222 */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_BCM5222		"BCM5222"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_dma *info)
-{
-	volatile fecdma_t *fecp = (fecdma_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	volatile fecdma_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fecdma_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_dma *info = dev->priv;
-	int phyaddr, pass, temp;
-	uint phyno, phytype;
-
-	if (info->phyname_init) {
-		return info->phy_addr;
-	}
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		temp = 0;
-		if (info->index > 0) {
-			/* Some phy have multiple address, to solve the issue
-			   where phyno keeps starting from 0, check the
-			   previous phy address if both miibase are the same. */
-			if (info->miibase == (info->next)->miibase) {
-				temp = (info->next)->phy_addr + 1;
-			}
-		}
-
-		for (phyno = temp; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					strcpy(info->phy_name, STR_ID_BCM5222);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_BCM5222:
-					printf(STR_ID_BCM5222);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__ ((weak, alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fecdma_t *fecp;
-	struct fec_info_dma *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fecdma_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/board/idmr/Makefile b/board/idmr/Makefile
index be704b7..cf07cf4 100644
--- a/board/idmr/Makefile
+++ b/board/idmr/Makefile
@@ -25,7 +25,7 @@
 
 LIB	= $(obj)lib$(BOARD).a
 
-COBJS	= $(BOARD).o flash.o mii.o
+COBJS	= $(BOARD).o flash.o
 
 SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(COBJS))
diff --git a/board/idmr/mii.c b/board/idmr/mii.c
deleted file mode 100644
index e79fa19..0000000
--- a/board/idmr/mii.c
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
- * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm/fec.h>
-#include <asm/immap.h>
-
-#include <config.h>
-#include <net.h>
-
-DECLARE_GLOBAL_DATA_PTR;
-
-#if defined(CONFIG_CMD_NET) && defined(CONFIG_NET_MULTI)
-#undef MII_DEBUG
-#undef ET_DEBUG
-
-int fecpin_setclear(struct eth_device *dev, int setclear)
-{
-	if (setclear) {
-		/* Enable Ethernet pins */
-		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C);
-	} else {
-	}
-
-	return 0;
-}
-
-#if defined(CONFIG_SYS_DISCOVER_PHY) || defined(CONFIG_CMD_MII)
-#include <miiphy.h>
-
-/* Make MII read/write commands for the FEC. */
-#define mk_mii_read(ADDR, REG)	(0x60020000 | ((ADDR << 23) | (REG & 0x1f) << 18))
-
-#define mk_mii_write(ADDR, REG, VAL)	(0x50020000 | ((ADDR << 23) | (REG & 0x1f) << 18) | (VAL & 0xffff))
-
-/* PHY identification */
-#define PHY_ID_LXT970		0x78100000	/* LXT970 */
-#define PHY_ID_LXT971		0x001378e0	/* LXT971 and 972 */
-#define PHY_ID_82555		0x02a80150	/* Intel 82555 */
-#define PHY_ID_QS6612		0x01814400	/* QS6612 */
-#define PHY_ID_AMD79C784	0x00225610	/* AMD 79C784 */
-#define PHY_ID_LSI80225		0x0016f870	/* LSI 80225 */
-#define PHY_ID_LSI80225B	0x0016f880	/* LSI 80225/B */
-#define PHY_ID_DP83848VV	0x20005C90	/* National 83848 */
-#define PHY_ID_DP83849		0x20005CA2	/* National 82849 */
-#define PHY_ID_KS8721BL		0x00221619	/* Micrel KS8721BL/SL */
-
-#define STR_ID_LXT970		"LXT970"
-#define STR_ID_LXT971		"LXT971"
-#define STR_ID_82555		"Intel82555"
-#define STR_ID_QS6612		"QS6612"
-#define STR_ID_AMD79C784	"AMD79C784"
-#define STR_ID_LSI80225		"LSI80225"
-#define STR_ID_LSI80225B	"LSI80225/B"
-#define STR_ID_DP83848VV	"N83848"
-#define STR_ID_DP83849		"N83849"
-#define STR_ID_KS8721BL		"KS8721BL"
-
-/****************************************************************************
- * mii_init -- Initialize the MII for MII command without ethernet
- * This function is a subset of eth_init
- ****************************************************************************
- */
-void mii_reset(struct fec_info_s *info)
-{
-	volatile fec_t *fecp = (fec_t *) (info->miibase);
-	int i;
-
-	fecp->ecr = FEC_ECR_RESET;
-	for (i = 0; (fecp->ecr & FEC_ECR_RESET) && (i < FEC_RESET_DELAY); ++i) {
-		udelay(1);
-	}
-	if (i == FEC_RESET_DELAY) {
-		printf("FEC_RESET_DELAY timeout\n");
-	}
-}
-
-/* send command to phy using mii, wait for result */
-uint mii_send(uint mii_cmd)
-{
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	volatile fec_t *ep;
-	uint mii_reply;
-	int j = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	ep = (fec_t *) info->miibase;
-
-	ep->mmfr = mii_cmd;	/* command to phy */
-
-	/* wait for mii complete */
-	while (!(ep->eir & FEC_EIR_MII) && (j < MCFFEC_TOUT_LOOP)) {
-		udelay(1);
-		j++;
-	}
-	if (j >= MCFFEC_TOUT_LOOP) {
-		printf("MII not complete\n");
-		return -1;
-	}
-
-	mii_reply = ep->mmfr;	/* result from phy */
-	ep->eir = FEC_EIR_MII;	/* clear MII complete */
-#ifdef ET_DEBUG
-	printf("%s[%d] %s: sent=0x%8.8x, reply=0x%8.8x\n",
-	       __FILE__, __LINE__, __FUNCTION__, mii_cmd, mii_reply);
-#endif
-
-	return (mii_reply & 0xffff);	/* data read from phy */
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY || CONFIG_CMD_MII */
-
-#if defined(CONFIG_SYS_DISCOVER_PHY)
-int mii_discover_phy(struct eth_device *dev)
-{
-#define MAX_PHY_PASSES 11
-	struct fec_info_s *info = dev->priv;
-	int phyaddr, pass;
-	uint phyno, phytype;
-
-	if (info->phyname_init)
-		return info->phy_addr;
-
-	phyaddr = -1;		/* didn't find a PHY yet */
-	for (pass = 1; pass <= MAX_PHY_PASSES && phyaddr < 0; ++pass) {
-		if (pass > 1) {
-			/* PHY may need more time to recover from reset.
-			 * The LXT970 needs 50ms typical, no maximum is
-			 * specified, so wait 10ms before try again.
-			 * With 11 passes this gives it 100ms to wake up.
-			 */
-			udelay(10000);	/* wait 10ms */
-		}
-
-		for (phyno = 0; phyno < 32 && phyaddr < 0; ++phyno) {
-
-			phytype = mii_send(mk_mii_read(phyno, PHY_PHYIDR1));
-#ifdef ET_DEBUG
-			printf("PHY type 0x%x pass %d type\n", phytype, pass);
-#endif
-			if (phytype != 0xffff) {
-				phyaddr = phyno;
-				phytype <<= 16;
-				phytype |=
-				    mii_send(mk_mii_read(phyno, PHY_PHYIDR2));
-
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					strcpy(info->phy_name,
-					       STR_ID_KS8721BL);
-					info->phyname_init = 1;
-					break;
-				default:
-					strcpy(info->phy_name, "unknown");
-					info->phyname_init = 1;
-					break;
-				}
-
-#ifdef ET_DEBUG
-				printf("PHY @ 0x%x pass %d type ", phyno, pass);
-				switch (phytype & 0xffffffff) {
-				case PHY_ID_KS8721BL:
-					printf(STR_ID_KS8721BL);
-					break;
-				default:
-					printf("0x%08x\n", phytype);
-					break;
-				}
-#endif
-			}
-		}
-	}
-	if (phyaddr < 0)
-		printf("No PHY device found.\n");
-
-	return phyaddr;
-}
-#endif				/* CONFIG_SYS_DISCOVER_PHY */
-
-void mii_init(void) __attribute__((weak,alias("__mii_init")));
-
-void __mii_init(void)
-{
-	volatile fec_t *fecp;
-	struct fec_info_s *info;
-	struct eth_device *dev;
-	int miispd = 0, i = 0;
-	u16 autoneg = 0;
-
-	/* retrieve from register structure */
-	dev = eth_get_dev();
-	info = dev->priv;
-
-	fecp = (fec_t *) info->miibase;
-
-	fecpin_setclear(dev, 1);
-
-	mii_reset(info);
-
-	/* We use strictly polling mode only */
-	fecp->eimr = 0;
-
-	/* Clear any pending interrupt */
-	fecp->eir = 0xffffffff;
-
-	/* Set MII speed */
-	miispd = (gd->bus_clk / 1000000) / 5;
-	fecp->mscr = miispd << 1;
-
-	info->phy_addr = mii_discover_phy(dev);
-
-#define AUTONEGLINK		(PHY_BMSR_AUTN_COMP | PHY_BMSR_LS)
-	while (i < MCFFEC_TOUT_LOOP) {
-		autoneg = 0;
-		miiphy_read(dev->name, info->phy_addr, PHY_BMSR, &autoneg);
-		i++;
-
-		if ((autoneg & AUTONEGLINK) == AUTONEGLINK)
-			break;
-
-		udelay(500);
-	}
-	if (i >= MCFFEC_TOUT_LOOP) {
-		printf("Auto Negotiation not complete\n");
-	}
-
-	/* adapt to the half/full speed settings */
-	info->dup_spd = miiphy_duplex(dev->name, info->phy_addr) << 16;
-	info->dup_spd |= miiphy_speed(dev->name, info->phy_addr);
-}
-
-/*****************************************************************************
- * Read and write a MII PHY register, routines used by MII Utilities
- *
- * FIXME: These routines are expected to return 0 on success, but mii_send
- *	  does _not_ return an error code. Maybe 0xFFFF means error, i.e.
- *	  no PHY connected...
- *	  For now always return 0.
- * FIXME: These routines only work after calling eth_init() at least once!
- *	  Otherwise they hang in mii_send() !!! Sorry!
- *****************************************************************************/
-
-int mcffec_miiphy_read(char *devname, unsigned char addr, unsigned char reg,
-		       unsigned short *value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_read(0x%x) @ 0x%x = ", reg, addr);
-#endif
-	rdreg = mii_send(mk_mii_read(addr, reg));
-
-	*value = rdreg;
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", *value);
-#endif
-
-	return 0;
-}
-
-int mcffec_miiphy_write(char *devname, unsigned char addr, unsigned char reg,
-			unsigned short value)
-{
-	short rdreg;		/* register working value */
-
-#ifdef MII_DEBUG
-	printf("miiphy_write(0x%x) @ 0x%x = ", reg, addr);
-#endif
-
-	rdreg = mii_send(mk_mii_write(addr, reg, value));
-
-#ifdef MII_DEBUG
-	printf("0x%04x\n", value);
-#endif
-
-	return 0;
-}
-
-#endif				/* CONFIG_CMD_NET, FEC_ENET & NET_MULTI */
diff --git a/cpu/mcf5227x/Makefile b/cpu/mcf5227x/Makefile
index d0e9b45..44f9385 100644
--- a/cpu/mcf5227x/Makefile
+++ b/cpu/mcf5227x/Makefile
@@ -28,7 +28,7 @@
 LIB	= lib$(CPU).a
 
 START	= start.o
-COBJS	= cpu.o speed.o cpu_init.o interrupts.o
+COBJS	= cpu.o speed.o cpu_init.o interrupts.o dspi.o
 
 SRCS	:= $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
 OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/mcf5227x/cpu.c b/cpu/mcf5227x/cpu.c
index 765aec6..d9f5f43 100644
--- a/cpu/mcf5227x/cpu.c
+++ b/cpu/mcf5227x/cpu.c
@@ -65,12 +65,12 @@
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
 		printf("       CPU CLK %s MHz BUS CLK %s MHz FLB CLK %s MHz\n",
-		       strmhz(buf1, gd->cpu_clk)),
-		       strmhz(buf2, gd->bus_clk)),
-		       strmhz(buf3, gd->flb_clk)));
+		       strmhz(buf1, gd->cpu_clk),
+		       strmhz(buf2, gd->bus_clk),
+		       strmhz(buf3, gd->flb_clk));
 		printf("       INP CLK %s MHz VCO CLK %s MHz\n",
-		       strmhz(buf1, gd->inp_clk)),
-		       strmhz(buf2, gd->vco_clk)));
+		       strmhz(buf1, gd->inp_clk),
+		       strmhz(buf2, gd->vco_clk));
 	}
 
 	return 0;
diff --git a/cpu/mcf5227x/cpu_init.c b/cpu/mcf5227x/cpu_init.c
index 0f1dd1f..8945ef3 100644
--- a/cpu/mcf5227x/cpu_init.c
+++ b/cpu/mcf5227x/cpu_init.c
@@ -45,6 +45,7 @@
 	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
 	volatile pll_t *pll = (volatile pll_t *)MMAP_PLL;
 
+#if !defined(CONFIG_CF_SBF)
 	/* Workaround, must place before fbcs */
 	pll->psr = 0x12;
 
@@ -58,37 +59,44 @@
 	scm1->pacrg = 0;
 	scm1->pacri = 0;
 
-#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
+     && defined(CONFIG_SYS_CS0_CTRL))
 	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
 	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
 	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
 #endif
+#endif				/* CONFIG_CF_SBF */
 
-#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
+     && defined(CONFIG_SYS_CS1_CTRL))
 	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
 	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
 	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
 #endif
 
-#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
+     && defined(CONFIG_SYS_CS2_CTRL))
 	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
 	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
 	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
 #endif
 
-#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
+     && defined(CONFIG_SYS_CS3_CTRL))
 	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
 	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
 	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
 #endif
 
-#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
+     && defined(CONFIG_SYS_CS4_CTRL))
 	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
 	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
 	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
 #endif
 
-#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
+     && defined(CONFIG_SYS_CS5_CTRL))
 	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
 	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
 	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
diff --git a/cpu/mcf5227x/dspi.c b/cpu/mcf5227x/dspi.c
new file mode 100644
index 0000000..7f48f91
--- /dev/null
+++ b/cpu/mcf5227x/dspi.c
@@ -0,0 +1,261 @@
+/*
+ *
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <spi.h>
+#include <malloc.h>
+
+#if defined(CONFIG_CF_DSPI)
+#include <asm/immap.h>
+
+void dspi_init(void)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+
+	gpio->par_dspi =
+	    GPIO_PAR_DSPI_SIN_SIN | GPIO_PAR_DSPI_SOUT_SOUT |
+	    GPIO_PAR_DSPI_SCK_SCK;
+
+	dspi->dmcr = DSPI_DMCR_MSTR | DSPI_DMCR_CSIS7 | DSPI_DMCR_CSIS6 |
+	    DSPI_DMCR_CSIS5 | DSPI_DMCR_CSIS4 | DSPI_DMCR_CSIS3 |
+	    DSPI_DMCR_CSIS2 | DSPI_DMCR_CSIS1 | DSPI_DMCR_CSIS0 |
+	    DSPI_DMCR_CRXF | DSPI_DMCR_CTXF;
+
+#ifdef CONFIG_SYS_DSPI_DCTAR0
+	dspi->dctar0 = CONFIG_SYS_DSPI_DCTAR0;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR1
+	dspi->dctar1 = CONFIG_SYS_DSPI_DCTAR1;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR2
+	dspi->dctar2 = CONFIG_SYS_DSPI_DCTAR2;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR3
+	dspi->dctar3 = CONFIG_SYS_DSPI_DCTAR3;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR4
+	dspi->dctar4 = CONFIG_SYS_DSPI_DCTAR4;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR5
+	dspi->dctar5 = CONFIG_SYS_DSPI_DCTAR5;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR6
+	dspi->dctar6 = CONFIG_SYS_DSPI_DCTAR6;
+#endif
+#ifdef CONFIG_SYS_DSPI_DCTAR7
+	dspi->dctar7 = CONFIG_SYS_DSPI_DCTAR7;
+#endif
+}
+
+void dspi_tx(int chipsel, u8 attrib, u16 data)
+{
+	volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+
+	while ((dspi->dsr & 0x0000F000) >= 4) ;
+
+	dspi->dtfr = (attrib << 24) | ((1 << chipsel) << 16) | data;
+}
+
+u16 dspi_rx(void)
+{
+	volatile dspi_t *dspi = (dspi_t *) MMAP_DSPI;
+
+	while ((dspi->dsr & 0x000000F0) == 0) ;
+
+	return (dspi->drfr & 0xFFFF);
+}
+
+#if defined(CONFIG_CMD_SPI)
+void spi_init_f(void)
+{
+}
+
+void spi_init_r(void)
+{
+}
+
+void spi_init(void)
+{
+	dspi_init();
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+				  unsigned int max_hz, unsigned int mode)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	struct spi_slave *slave;
+
+	slave = malloc(sizeof(struct spi_slave));
+	if (!slave)
+		return NULL;
+
+	switch (cs) {
+	case 0:
+		gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0;
+		gpio->par_dspi |= GPIO_PAR_DSPI_PCS0_PCS0;
+		break;
+	case 2:
+		gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK;
+		gpio->par_timer |= GPIO_PAR_TIMER_T2IN_DSPIPCS2;
+		break;
+	}
+
+	slave->bus = bus;
+	slave->cs = cs;
+
+	return slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	switch (slave->cs) {
+	case 0:
+		gpio->par_dspi &= ~GPIO_PAR_DSPI_PCS0_PCS0;
+		break;
+	case 2:
+		gpio->par_timer &= GPIO_PAR_TIMER_T2IN_MASK;
+		break;
+	}
+
+	free(slave);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
+	     void *din, unsigned long flags)
+{
+	static int bWrite = 0;
+	u8 *spi_rd, *spi_wr;
+	int len = bitlen >> 3;
+
+	spi_rd = (u8 *) din;
+	spi_wr = (u8 *) dout;
+
+	/* command handling */
+	if (((len == 4) || (len == 1) || (len == 5)) && (dout != NULL)) {
+		switch (*spi_wr) {
+		case 0x02:	/* Page Prog */
+			bWrite = 1;
+			dspi_tx(slave->cs, 0x80, spi_wr[0]);
+			dspi_rx();
+			dspi_tx(slave->cs, 0x80, spi_wr[1]);
+			dspi_rx();
+			dspi_tx(slave->cs, 0x80, spi_wr[2]);
+			dspi_rx();
+			dspi_tx(slave->cs, 0x80, spi_wr[3]);
+			dspi_rx();
+			return 0;
+		case 0x05:	/* Read Status */
+			if (len == 4)
+				if ((spi_wr[1] == 0xFF) && (spi_wr[2] == 0xFF)
+				    && (spi_wr[3] == 0xFF)) {
+					dspi_tx(slave->cs, 0x80, *spi_wr);
+					dspi_rx();
+				}
+			return 0;
+		case 0x06:	/* WREN */
+			dspi_tx(slave->cs, 0x00, *spi_wr);
+			dspi_rx();
+			return 0;
+		case 0x0B:	/* Fast read */
+			if ((len == 5) && (spi_wr[4] == 0)) {
+				dspi_tx(slave->cs, 0x80, spi_wr[0]);
+				dspi_rx();
+				dspi_tx(slave->cs, 0x80, spi_wr[1]);
+				dspi_rx();
+				dspi_tx(slave->cs, 0x80, spi_wr[2]);
+				dspi_rx();
+				dspi_tx(slave->cs, 0x80, spi_wr[3]);
+				dspi_rx();
+				dspi_tx(slave->cs, 0x80, spi_wr[4]);
+				dspi_rx();
+			}
+			return 0;
+		case 0x9F:	/* RDID */
+			dspi_tx(slave->cs, 0x80, *spi_wr);
+			dspi_rx();
+			return 0;
+		case 0xD8:	/* Sector erase */
+			if (len == 4)
+				if ((spi_wr[2] == 0) && (spi_wr[3] == 0)) {
+					dspi_tx(slave->cs, 0x80, spi_wr[0]);
+					dspi_rx();
+					dspi_tx(slave->cs, 0x80, spi_wr[1]);
+					dspi_rx();
+					dspi_tx(slave->cs, 0x80, spi_wr[2]);
+					dspi_rx();
+					dspi_tx(slave->cs, 0x00, spi_wr[3]);
+					dspi_rx();
+				}
+			return 0;
+		}
+	}
+
+	if (bWrite)
+		len--;
+
+	while (len--) {
+		if (dout != NULL) {
+			dspi_tx(slave->cs, 0x80, *spi_wr);
+			dspi_rx();
+			spi_wr++;
+		}
+
+		if (din != NULL) {
+			dspi_tx(slave->cs, 0x80, 0);
+			*spi_rd = dspi_rx();
+			spi_rd++;
+		}
+	}
+
+	if (flags == SPI_XFER_END) {
+		if (bWrite) {
+			dspi_tx(slave->cs, 0x00, *spi_wr);
+			dspi_rx();
+			bWrite = 0;
+		} else {
+			dspi_tx(slave->cs, 0x00, 0);
+			dspi_rx();
+		}
+	}
+
+	return 0;
+}
+#endif				/* CONFIG_CMD_SPI */
+
+#endif				/* CONFIG_CF_DSPI */
diff --git a/cpu/mcf5227x/speed.c b/cpu/mcf5227x/speed.c
index 74b9059..7e385d3 100644
--- a/cpu/mcf5227x/speed.c
+++ b/cpu/mcf5227x/speed.c
@@ -90,17 +90,33 @@
 	int vco, temp, pcrvalue, pfdr;
 	u8 bootmode;
 
-	bootmode = (ccm->ccr & 0x000C) >> 2;
-
 	pcrvalue = pll->pcr & 0xFF0F0FFF;
 	pfdr = pcrvalue >> 24;
 
-	if (pfdr != 0x1E) {
+	if (pfdr == 0x1E)
+		bootmode = 0;	/* Normal Mode */
+
+#ifdef CONFIG_CF_SBF
+	bootmode = 3;		/* Serial Mode */
+#endif
+
+	if (bootmode == 0) {
+		/* Normal mode */
+		vco = ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
+		if ((vco < CLOCK_PLL_FVCO_MIN) || (vco > CLOCK_PLL_FVCO_MAX)) {
+			/* Default value */
+			pcrvalue = (pll->pcr & 0x00FFFFFF);
+			pcrvalue |= 0x1E << 24;
+			pll->pcr = pcrvalue;
+			vco =
+			    ((pll->pcr & 0xFF000000) >> 24) *
+			    CONFIG_SYS_INPUT_CLKSRC;
+		}
+		gd->vco_clk = vco;	/* Vco clock */
+	} else if (bootmode == 3) {
 		/* serial mode */
-	} else {
-		/* Normal Mode */
-		vco = pfdr * CONFIG_SYS_INPUT_CLKSRC;
-		gd->vco_clk = vco;
+		vco = ((pll->pcr & 0xFF000000) >> 24) * CONFIG_SYS_INPUT_CLKSRC;
+		gd->vco_clk = vco;	/* Vco clock */
 	}
 
 	if ((ccm->ccr & CCM_MISCCR_LIMP) == CCM_MISCCR_LIMP) {
diff --git a/cpu/mcf5227x/start.S b/cpu/mcf5227x/start.S
index becaab7..9387250 100644
--- a/cpu/mcf5227x/start.S
+++ b/cpu/mcf5227x/start.S
@@ -46,6 +46,11 @@
 	addl	#60,%sp;		/* space for 15 regs */ \
 	rte;
 
+#if defined(CONFIG_CF_SBF)
+#define ASM_DRAMINIT	(asm_dram_init - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR	(asm_sbf_img_hdr - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#endif
+
 .text
 /*
  *	Vector table. This is used for initial platform startup.
@@ -53,8 +58,14 @@
  */
 _vectors:
 
-INITSP:		.long	0x00000000	/* Initial SP	*/
-INITPC:		.long	_START	/* Initial PC		*/
+#if defined(CONFIG_CF_SBF)
+INITSP:		.long	0		/* Initial SP	*/
+INITPC:		.long	ASM_DRAMINIT	/* Initial PC 	*/
+#else
+INITSP:		.long	0	/* Initial SP	*/
+INITPC:		.long	_START	/* Initial PC 		*/
+#endif
+
 vector02:	.long	_FAULT	/* Access Error		*/
 vector03:	.long	_FAULT	/* Address Error	*/
 vector04:	.long	_FAULT	/* Illegal Instruction	*/
@@ -83,6 +94,7 @@
 vector1E:	.long	_FAULT	/* Autovector Level 6	*/
 vector1F:	.long	_FAULT	/* Autovector Level 7	*/
 
+#if !defined(CONFIG_CF_SBF)
 /* TRAP #0 - #15 */
 vector20_2F:
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
@@ -122,9 +134,231 @@
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
 .long	_FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT, _FAULT
+#endif
+
+#if defined(CONFIG_CF_SBF)
+	/* Image header: chksum 4 bytes, len 4 bytes, img dest 4 bytes */
+asm_sbf_img_hdr:
+	.long	0x00000000	/* checksum, not yet implemented */
+	.long	0x00020000	/* image length */
+	.long	TEXT_BASE	/* image to be relocated at */
+
+asm_dram_init:
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
+	movec	%d0, %RAMBAR1	/* init Rambar */
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET), %sp
+	clr.l %sp@-
+
+	/* Must disable global address */
+	move.l	#0xFC008000, %a1
+	move.l	#(CONFIG_SYS_CS0_BASE), (%a1)
+	move.l	#0xFC008008, %a1
+	move.l	#(CONFIG_SYS_CS0_CTRL), (%a1)
+	move.l	#0xFC008004, %a1
+	move.l	#(CONFIG_SYS_CS0_MASK), (%a1)
+
+	/*
+	 * Dram Initialization
+	 * a1, a2, and d0
+	 */
+	/* mscr sdram */
+	move.l	#0xFC0A4074, %a1
+	move.b	#(CONFIG_SYS_SDRAM_DRV_STRENGTH), (%a1)
+	nop
+
+	/* SDRAM Chip 0 and 1 */
+	move.l	#0xFC0B8110, %a1
+	move.l	#0xFC0B8114, %a2
+
+	/* calculate the size */
+	move.l	#0x13, %d1
+	move.l	#(CONFIG_SYS_SDRAM_SIZE), %d2
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	lsr.l	#1, %d2
+#endif
+
+dramsz_loop:
+	lsr.l	#1, %d2
+	add.l	#1, %d1
+	cmp.l	#1, %d2
+	bne	dramsz_loop
+
+	/* SDRAM Chip 0 and 1 */
+	move.l	#(CONFIG_SYS_SDRAM_BASE), (%a1)
+	or.l	%d1, (%a1)
+#ifdef CONFIG_SYS_SDRAM_BASE1
+	move.l	#(CONFIG_SYS_SDRAM_BASE1), (%a2)
+	or.l	%d1, (%a2)
+#endif
+	nop
+
+	/* dram cfg1 and cfg2 */
+	move.l	#0xFC0B8008, %a1
+	move.l	#(CONFIG_SYS_SDRAM_CFG1), (%a1)
+	nop
+	move.l	#0xFC0B800C, %a2
+	move.l	#(CONFIG_SYS_SDRAM_CFG2), (%a2)
+	nop
+
+	move.l	#0xFC0B8000, %a1	/* Mode */
+	move.l	#0xFC0B8004, %a2	/* Ctrl */
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Issue LEMR */
+	move.l	#(CONFIG_SYS_SDRAM_MODE), (%a1)
+	nop
+	move.l	#(CONFIG_SYS_SDRAM_EMOD), (%a1)
+	nop
+
+	move.l	#1000, %d0
+wait1000:
+	nop
+	subq.l	#1, %d0
+	bne	wait1000
+
+	/* Issue PALL */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 2), (%a2)
+	nop
+
+	/* Perform two refresh cycles */
+	move.l	#(CONFIG_SYS_SDRAM_CTRL + 4), %d0
+	nop
+	move.l	%d0, (%a2)
+	move.l	%d0, (%a2)
+	nop
+
+	move.l	#(CONFIG_SYS_SDRAM_CTRL), %d0
+	and.l	#0x7FFFFFFF, %d0
+	or.l	#0x10000c00, %d0
+	move.l	%d0, (%a2)
+	nop
+
+	/*
+	 * DSPI Initialization
+	 * a0 - general, sram - 0x80008000 - 32, see M52277EVB.h
+	 * a1 - dspi status
+	 * a2 - dtfr
+	 * a3 - drfr
+	 * a4 - Dst addr
+	 */
+
+	/* Enable pins for DSPI mode - chip-selects are enabled later */
+	move.l	#0xFC0A4036, %a0
+	move.b	#0x3F, %d0
+	move.b	%d0, (%a0)
+
+	/* DSPI CS */
+#ifdef CONFIG_SYS_DSPI_CS0
+	move.b	(%a0), %d0
+	or.l	#0xC0, %d0
+	move.b	%d0, (%a0)
+#endif
+#ifdef CONFIG_SYS_DSPI_CS2
+	move.l	#0xFC0A4037, %a0
+	move.b	(%a0), %d0
+	or.l	#0x10, %d0
+	move.b	%d0, (%a0)
+#endif
+	nop
+
+	/* Configure DSPI module */
+	move.l	#0xFC05C000, %a0
+	move.l	#0x80FF0C00, (%a0)	/* Master, clear TX/RX FIFO */
+
+	move.l	#0xFC05C00C, %a0
+	move.l	#0x3E000011, (%a0)
+
+	move.l	#0xFC05C034, %a2	/* dtfr */
+	move.l	#0xFC05C03B, %a3	/* drfr */
+
+	move.l	#(ASM_SBF_IMG_HDR + 4), %a1
+	move.l	(%a1)+, %d5
+	move.l	(%a1), %a4
+
+	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_SBFHDR_DATA_OFFSET), %a0
+	move.l	#(CONFIG_SYS_SBFHDR_SIZE), %d4
+
+	move.l	#0xFC05C02C, %a1	/* dspi status */
+
+	/* Issue commands and address */
+	move.l	#0x8004000B, %d2	/* Fast Read Cmd */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Address byte 2 */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Address byte 1 */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Address byte 0 */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.l	#0x80040000, %d2	/* Dummy Wr and Rd */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	/* Transfer serial boot header to sram */
+asm_dspi_rd_loop1:
+	move.l	#0x80040000, %d2
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.b	%d1, (%a0)		/* read, copy to dst */
+
+	add.l	#1, %a0			/* inc dst by 1 */
+	sub.l	#1, %d4			/* dec cnt by 1 */
+	bne	asm_dspi_rd_loop1
+
+	/* Transfer u-boot from serial flash to memory */
+asm_dspi_rd_loop2:
+	move.l	#0x80040000, %d2
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	move.b	%d1, (%a4)		/* read, copy to dst */
+
+	add.l	#1, %a4			/* inc dst by 1 */
+	sub.l	#1, %d5			/* dec cnt by 1 */
+	bne	asm_dspi_rd_loop2
+
+	move.l	#0x00040000, %d2	/* Terminate */
+	jsr	asm_dspi_wr_status
+	jsr	asm_dspi_rd_status
+
+	/* jump to memory and execute */
+	move.l	#(TEXT_BASE + 0x400), %a0
+	move.l	%a0, (%a1)
+	jmp	(%a0)
+
+asm_dspi_wr_status:
+	move.l	(%a1), %d0		/* status */
+	and.l	#0x0000F000, %d0
+	cmp.l	#0x00003000, %d0
+	bgt	asm_dspi_wr_status
+
+	move.l	%d2, (%a2)
+	rts
+
+asm_dspi_rd_status:
+	move.l	(%a1), %d0		/* status */
+	and.l	#0x000000F0, %d0
+	lsr.l	#4, %d0
+	cmp.l	#0, %d0
+	beq	asm_dspi_rd_status
+
+	move.b	(%a3), %d1
+	rts
+#endif			/* CONFIG_CF_SBF */
 
 	.text
-
+	. = 0x400
 	.globl	_start
 _start:
 	nop
@@ -132,11 +366,16 @@
 	move.w #0x2700,%sr		/* Mask off Interrupt */
 
 	/* Set vector base register at the beginning of the Flash */
+#if defined(CONFIG_CF_SBF)
+	move.l	#TEXT_BASE, %d0
+	movec	%d0, %VBR
+#else
 	move.l	#CONFIG_SYS_FLASH_BASE, %d0
 	movec	%d0, %VBR
 
 	move.l	#(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
 	movec	%d0, %RAMBAR1
+#endif
 
 	/* initialize general use internal ram */
 	move.l #0, %d0
diff --git a/cpu/mcf523x/cpu.c b/cpu/mcf523x/cpu.c
index b9e48aa..a1a5133 100644
--- a/cpu/mcf523x/cpu.c
+++ b/cpu/mcf523x/cpu.c
@@ -65,8 +65,8 @@
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
 		printf("       CPU CLK %s MHz BUS CLK %s MHz\n",
-		       strmhz(buf1, gd->cpu_clk)),
-		       strmhz(buf2, gd->bus_clk)));
+		       strmhz(buf1, gd->cpu_clk),
+		       strmhz(buf2, gd->bus_clk));
 	}
 
 	return 0;
diff --git a/cpu/mcf523x/cpu_init.c b/cpu/mcf523x/cpu_init.c
index 6520944..3c04fd4 100644
--- a/cpu/mcf523x/cpu_init.c
+++ b/cpu/mcf523x/cpu_init.c
@@ -27,9 +27,14 @@
 
 #include <common.h>
 #include <watchdog.h>
-
 #include <asm/immap.h>
 
+#if defined(CONFIG_CMD_NET)
+#include <config.h>
+#include <net.h>
+#include <asm/fec.h>
+#endif
+
 /*
  * Breath some life into the CPU...
  *
@@ -143,3 +148,20 @@
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	if (setclear) {
+		gpio->par_feci2c |=
+		    (GPIO_PAR_FECI2C_EMDC_FECEMDC | GPIO_PAR_FECI2C_EMDIO_FECEMDIO);
+	} else {
+		gpio->par_feci2c &=
+		    ~(GPIO_PAR_FECI2C_EMDC_MASK | GPIO_PAR_FECI2C_EMDIO_MASK);
+	}
+
+	return 0;
+}
+#endif
diff --git a/cpu/mcf52x2/cpu_init.c b/cpu/mcf52x2/cpu_init.c
index 7bb358e..18308c8 100644
--- a/cpu/mcf52x2/cpu_init.c
+++ b/cpu/mcf52x2/cpu_init.c
@@ -36,6 +36,71 @@
 #include <watchdog.h>
 #include <asm/immap.h>
 
+#if defined(CONFIG_CMD_NET)
+#include <config.h>
+#include <net.h>
+#include <asm/fec.h>
+#endif
+
+#ifndef CONFIG_M5272
+/* Only 5272 Flexbus chipselect is different from the rest */
+void init_fbcs(void)
+{
+	volatile fbcs_t *fbcs = (fbcs_t *) (MMAP_FBCS);
+
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
+     && defined(CONFIG_SYS_CS0_CTRL))
+	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
+#else
+#warning "Chip Select 0 are not initialized/used"
+#endif
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
+     && defined(CONFIG_SYS_CS1_CTRL))
+	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
+     && defined(CONFIG_SYS_CS2_CTRL))
+	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
+     && defined(CONFIG_SYS_CS3_CTRL))
+	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
+     && defined(CONFIG_SYS_CS4_CTRL))
+	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
+     && defined(CONFIG_SYS_CS5_CTRL))
+	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS6_BASE) && defined(CONFIG_SYS_CS6_MASK) \
+     && defined(CONFIG_SYS_CS6_CTRL))
+	fbcs->csar6 = CONFIG_SYS_CS6_BASE;
+	fbcs->cscr6 = CONFIG_SYS_CS6_CTRL;
+	fbcs->csmr6 = CONFIG_SYS_CS6_MASK;
+#endif
+#if (defined(CONFIG_SYS_CS7_BASE) && defined(CONFIG_SYS_CS7_MASK) \
+     && defined(CONFIG_SYS_CS7_CTRL))
+	fbcs->csar7 = CONFIG_SYS_CS7_BASE;
+	fbcs->cscr7 = CONFIG_SYS_CS7_CTRL;
+	fbcs->csmr7 = CONFIG_SYS_CS7_MASK;
+#endif
+}
+#endif
+
 #if defined(CONFIG_M5253)
 /*
  * Breath some life into the CPU...
@@ -66,22 +131,14 @@
 	mbar2_writeByte(MCFSIM_INTBASE, 0x40);	/* Base interrupts at 64 */
 	mbar2_writeByte(MCFSIM_SPURVEC, 0x00);
 
-	/*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); */ /* Enable a 1 cycle pre-drive cycle on CS1 */
+	/*mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020); *//* Enable a 1 cycle pre-drive cycle on CS1 */
 
-	/*
-	 *  Setup chip selects...
-	 */
-
-	mbar_writeShort(MCFSIM_CSAR1, CONFIG_SYS_CSAR1);
-	mbar_writeShort(MCFSIM_CSCR1, CONFIG_SYS_CSCR1);
-	mbar_writeLong(MCFSIM_CSMR1, CONFIG_SYS_CSMR1);
-
-	mbar_writeShort(MCFSIM_CSAR0, CONFIG_SYS_CSAR0);
-	mbar_writeShort(MCFSIM_CSCR0, CONFIG_SYS_CSCR0);
-	mbar_writeLong(MCFSIM_CSMR0, CONFIG_SYS_CSMR0);
+	/* FlexBus Chipselect */
+	init_fbcs();
 
 #ifdef CONFIG_FSL_I2C
-	CONFIG_SYS_I2C_PINMUX_REG = CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR;
+	CONFIG_SYS_I2C_PINMUX_REG =
+	    CONFIG_SYS_I2C_PINMUX_REG & CONFIG_SYS_I2C_PINMUX_CLR;
 	CONFIG_SYS_I2C_PINMUX_REG |= CONFIG_SYS_I2C_PINMUX_SET;
 #ifdef CONFIG_SYS_I2C2_OFFSET
 	CONFIG_SYS_I2C2_PINMUX_REG &= CONFIG_SYS_I2C2_PINMUX_CLR;
@@ -121,6 +178,9 @@
 	mbar_writeShort(MCF_WTM_WCR, 0);
 #endif
 
+	/* FlexBus Chipselect */
+	init_fbcs();
+
 	/* Set clockspeed to 100MHz */
 	mbar_writeShort(MCF_FMPLL_SYNCR,
 			MCF_FMPLL_SYNCR_MFD(0) | MCF_FMPLL_SYNCR_RFD(0));
@@ -153,6 +213,19 @@
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	if (setclear) {
+		/* Enable Ethernet pins */
+		mbar_writeByte(MCF_GPIO_PAR_FECI2C, CONFIG_SYS_FECI2C);
+	} else {
+	}
+
+	return 0;
+}
+#endif				/* CONFIG_CMD_NET */
 #endif
 
 #if defined(CONFIG_M5272)
@@ -255,6 +328,22 @@
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	if (setclear) {
+		gpio->gpio_pbcnt |= GPIO_PBCNT_E_MDC | GPIO_PBCNT_E_RXER |
+				    GPIO_PBCNT_E_RXD1 | GPIO_PBCNT_E_RXD2 |
+				    GPIO_PBCNT_E_RXD3 | GPIO_PBCNT_E_TXD1 |
+				    GPIO_PBCNT_E_TXD2 | GPIO_PBCNT_E_TXD3;
+	} else {
+	}
+	return 0;
+}
+#endif				/* CONFIG_CMD_NET */
 #endif				/* #if defined(CONFIG_M5272) */
 
 #if defined(CONFIG_M5275)
@@ -268,66 +357,20 @@
  */
 void cpu_init_f(void)
 {
-	/* if we come from RAM we assume the CPU is
+	/*
+	 * if we come from RAM we assume the CPU is
 	 * already initialized.
 	 */
 
 #ifndef CONFIG_MONITOR_IS_IN_RAM
-	volatile wdog_t *wdog_reg = (wdog_t *)(MMAP_WDOG);
-	volatile gpio_t *gpio_reg = (gpio_t *)(MMAP_GPIO);
-	volatile csctrl_t *csctrl_reg = (csctrl_t *)(MMAP_FBCS);
+	volatile wdog_t *wdog_reg = (wdog_t *) (MMAP_WDOG);
+	volatile gpio_t *gpio_reg = (gpio_t *) (MMAP_GPIO);
 
 	/* Kill watchdog so we can initialize the PLL */
 	wdog_reg->wcr = 0;
 
-	/* Memory Controller: */
-	/* Flash */
-	csctrl_reg->ar0 = CONFIG_SYS_AR0_PRELIM;
-	csctrl_reg->cr0 = CONFIG_SYS_CR0_PRELIM;
-	csctrl_reg->mr0 = CONFIG_SYS_MR0_PRELIM;
-
-#if (defined(CONFIG_SYS_AR1_PRELIM) && defined(CONFIG_SYS_CR1_PRELIM) && defined(CONFIG_SYS_MR1_PRELIM))
-	csctrl_reg->ar1 = CONFIG_SYS_AR1_PRELIM;
-	csctrl_reg->cr1 = CONFIG_SYS_CR1_PRELIM;
-	csctrl_reg->mr1 = CONFIG_SYS_MR1_PRELIM;
-#endif
-
-#if (defined(CONFIG_SYS_AR2_PRELIM) && defined(CONFIG_SYS_CR2_PRELIM) && defined(CONFIG_SYS_MR2_PRELIM))
-	csctrl_reg->ar2 = CONFIG_SYS_AR2_PRELIM;
-	csctrl_reg->cr2 = CONFIG_SYS_CR2_PRELIM;
-	csctrl_reg->mr2 = CONFIG_SYS_MR2_PRELIM;
-#endif
-
-#if (defined(CONFIG_SYS_AR3_PRELIM) && defined(CONFIG_SYS_CR3_PRELIM) && defined(CONFIG_SYS_MR3_PRELIM))
-	csctrl_reg->ar3 = CONFIG_SYS_AR3_PRELIM;
-	csctrl_reg->cr3 = CONFIG_SYS_CR3_PRELIM;
-	csctrl_reg->mr3 = CONFIG_SYS_MR3_PRELIM;
-#endif
-
-#if (defined(CONFIG_SYS_AR4_PRELIM) && defined(CONFIG_SYS_CR4_PRELIM) && defined(CONFIG_SYS_MR4_PRELIM))
-	csctrl_reg->ar4 = CONFIG_SYS_AR4_PRELIM;
-	csctrl_reg->cr4 = CONFIG_SYS_CR4_PRELIM;
-	csctrl_reg->mr4 = CONFIG_SYS_MR4_PRELIM;
-#endif
-
-#if (defined(CONFIG_SYS_AR5_PRELIM) && defined(CONFIG_SYS_CR5_PRELIM) && defined(CONFIG_SYS_MR5_PRELIM))
-	csctrl_reg->ar5 = CONFIG_SYS_AR5_PRELIM;
-	csctrl_reg->cr5 = CONFIG_SYS_CR5_PRELIM;
-	csctrl_reg->mr5 = CONFIG_SYS_MR5_PRELIM;
-#endif
-
-#if (defined(CONFIG_SYS_AR6_PRELIM) && defined(CONFIG_SYS_CR6_PRELIM) && defined(CONFIG_SYS_MR6_PRELIM))
-	csctrl_reg->ar6 = CONFIG_SYS_AR6_PRELIM;
-	csctrl_reg->cr6 = CONFIG_SYS_CR6_PRELIM;
-	csctrl_reg->mr6 = CONFIG_SYS_MR6_PRELIM;
-#endif
-
-#if (defined(CONFIG_SYS_AR7_PRELIM) && defined(CONFIG_SYS_CR7_PRELIM) && defined(CONFIG_SYS_MR7_PRELIM))
-	csctrl_reg->ar7 = CONFIG_SYS_AR7_PRELIM;
-	csctrl_reg->cr7 = CONFIG_SYS_CR7_PRELIM;
-	csctrl_reg->mr7 = CONFIG_SYS_MR7_PRELIM;
-#endif
-
+	/* FlexBus Chipselect */
+	init_fbcs();
 #endif				/* #ifndef CONFIG_MONITOR_IS_IN_RAM */
 
 #ifdef CONFIG_FSL_I2C
@@ -349,7 +392,7 @@
 
 void uart_port_conf(void)
 {
-	volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
 
 	/* Setup Ports: */
 	switch (CONFIG_SYS_UART_PORT) {
@@ -364,6 +407,35 @@
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	struct fec_info_s *info = (struct fec_info_s *) dev->priv;
+	volatile gpio_t *gpio = (gpio_t *)MMAP_GPIO;
+
+	if (setclear) {
+		/* Enable Ethernet pins */
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
+			gpio->par_feci2c |= 0x0F00;
+			gpio->par_fec0hl |= 0xC0;
+		} else {
+			gpio->par_feci2c |= 0x00A0;
+			gpio->par_fec1hl |= 0xC0;
+		}
+	} else {
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
+			gpio->par_feci2c &= ~0x0F00;
+			gpio->par_fec0hl &= ~0xC0;
+		} else {
+			gpio->par_feci2c &= ~0x00A0;
+			gpio->par_fec1hl &= ~0xC0;
+		}
+	}
+
+	return 0;
+}
+#endif				/* CONFIG_CMD_NET */
 #endif				/* #if defined(CONFIG_M5275) */
 
 #if defined(CONFIG_M5282)
@@ -384,7 +456,8 @@
 #ifndef CONFIG_MONITOR_IS_IN_RAM
 	/* Set speed /PLL */
 	MCFCLOCK_SYNCR =
-	    MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) | MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD);
+	    MCFCLOCK_SYNCR_MFD(CONFIG_SYS_MFD) |
+	    MCFCLOCK_SYNCR_RFD(CONFIG_SYS_RFD);
 	while (!(MCFCLOCK_SYNSR & MCFCLOCK_SYNSR_LOCK)) ;
 
 	MCFGPIO_PBCDPAR = 0xc0;
@@ -425,119 +498,8 @@
 	MCFGPIO_DDRUA = CONFIG_SYS_DDRUA;
 #endif
 
-	/* This is probably a bad place to setup chip selects, but everyone
-	   else is doing it! */
-
-#if defined(CONFIG_SYS_CS0_BASE) & defined(CONFIG_SYS_CS0_SIZE) & \
-    defined(CONFIG_SYS_CS0_WIDTH) & defined(CONFIG_SYS_CS0_WS)
-
-	MCFCSM_CSAR0 = (CONFIG_SYS_CS0_BASE >> 16) & 0xFFFF;
-
-#if (CONFIG_SYS_CS0_WIDTH == 8)
-#define	 CONFIG_SYS_CS0_PS  MCFCSM_CSCR_PS_8
-#elif (CONFIG_SYS_CS0_WIDTH == 16)
-#define	 CONFIG_SYS_CS0_PS  MCFCSM_CSCR_PS_16
-#elif (CONFIG_SYS_CS0_WIDTH == 32)
-#define	 CONFIG_SYS_CS0_PS  MCFCSM_CSCR_PS_32
-#else
-#error	"CONFIG_SYS_CS0_WIDTH: Fault - wrong bus with for CS0"
-#endif
-	MCFCSM_CSCR0 = MCFCSM_CSCR_WS(CONFIG_SYS_CS0_WS)
-	    | CONFIG_SYS_CS0_PS | MCFCSM_CSCR_AA;
-
-#if (CONFIG_SYS_CS0_RO != 0)
-	MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS0_SIZE - 1)
-	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
-#else
-	MCFCSM_CSMR0 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS0_SIZE - 1) | MCFCSM_CSMR_V;
-#endif
-#else
-#warning "Chip Select 0 are not initialized/used"
-#endif
-
-#if defined(CONFIG_SYS_CS1_BASE) & defined(CONFIG_SYS_CS1_SIZE) & \
-    defined(CONFIG_SYS_CS1_WIDTH) & defined(CONFIG_SYS_CS1_WS)
-
-	MCFCSM_CSAR1 = (CONFIG_SYS_CS1_BASE >> 16) & 0xFFFF;
-
-#if (CONFIG_SYS_CS1_WIDTH == 8)
-#define	 CONFIG_SYS_CS1_PS  MCFCSM_CSCR_PS_8
-#elif (CONFIG_SYS_CS1_WIDTH == 16)
-#define	 CONFIG_SYS_CS1_PS  MCFCSM_CSCR_PS_16
-#elif (CONFIG_SYS_CS1_WIDTH == 32)
-#define	 CONFIG_SYS_CS1_PS  MCFCSM_CSCR_PS_32
-#else
-#error	"CONFIG_SYS_CS1_WIDTH: Fault - wrong bus with for CS1"
-#endif
-	MCFCSM_CSCR1 = MCFCSM_CSCR_WS(CONFIG_SYS_CS1_WS)
-	    | CONFIG_SYS_CS1_PS | MCFCSM_CSCR_AA;
-
-#if (CONFIG_SYS_CS1_RO != 0)
-	MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS1_SIZE - 1)
-	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
-#else
-	MCFCSM_CSMR1 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS1_SIZE - 1)
-	    | MCFCSM_CSMR_V;
-#endif
-#else
-#warning "Chip Select 1 are not initialized/used"
-#endif
-
-#if defined(CONFIG_SYS_CS2_BASE) & defined(CONFIG_SYS_CS2_SIZE) & \
-    defined(CONFIG_SYS_CS2_WIDTH) & defined(CONFIG_SYS_CS2_WS)
-
-	MCFCSM_CSAR2 = (CONFIG_SYS_CS2_BASE >> 16) & 0xFFFF;
-
-#if (CONFIG_SYS_CS2_WIDTH == 8)
-#define	 CONFIG_SYS_CS2_PS  MCFCSM_CSCR_PS_8
-#elif (CONFIG_SYS_CS2_WIDTH == 16)
-#define	 CONFIG_SYS_CS2_PS  MCFCSM_CSCR_PS_16
-#elif (CONFIG_SYS_CS2_WIDTH == 32)
-#define	 CONFIG_SYS_CS2_PS  MCFCSM_CSCR_PS_32
-#else
-#error	"CONFIG_SYS_CS2_WIDTH: Fault - wrong bus with for CS2"
-#endif
-	MCFCSM_CSCR2 = MCFCSM_CSCR_WS(CONFIG_SYS_CS2_WS)
-	    | CONFIG_SYS_CS2_PS | MCFCSM_CSCR_AA;
-
-#if (CONFIG_SYS_CS2_RO != 0)
-	MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS2_SIZE - 1)
-	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
-#else
-	MCFCSM_CSMR2 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS2_SIZE - 1)
-	    | MCFCSM_CSMR_V;
-#endif
-#else
-#warning "Chip Select 2 are not initialized/used"
-#endif
-
-#if defined(CONFIG_SYS_CS3_BASE) & defined(CONFIG_SYS_CS3_SIZE) & \
-    defined(CONFIG_SYS_CS3_WIDTH) & defined(CONFIG_SYS_CS3_WS)
-
-	MCFCSM_CSAR3 = (CONFIG_SYS_CS3_BASE >> 16) & 0xFFFF;
-
-#if (CONFIG_SYS_CS3_WIDTH == 8)
-#define	 CONFIG_SYS_CS3_PS  MCFCSM_CSCR_PS_8
-#elif (CONFIG_SYS_CS3_WIDTH == 16)
-#define	 CONFIG_SYS_CS3_PS  MCFCSM_CSCR_PS_16
-#elif (CONFIG_SYS_CS3_WIDTH == 32)
-#define	 CONFIG_SYS_CS3_PS  MCFCSM_CSCR_PS_32
-#else
-#error	"CONFIG_SYS_CS3_WIDTH: Fault - wrong bus with for CS1"
-#endif
-	MCFCSM_CSCR3 = MCFCSM_CSCR_WS(CONFIG_SYS_CS3_WS)
-	    | CONFIG_SYS_CS3_PS | MCFCSM_CSCR_AA;
-
-#if (CONFIG_SYS_CS3_RO != 0)
-	MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS3_SIZE - 1)
-	    | MCFCSM_CSMR_WP | MCFCSM_CSMR_V;
-#else
-	MCFCSM_CSMR3 = MCFCSM_CSMR_BAM(CONFIG_SYS_CS3_SIZE - 1)
-	    | MCFCSM_CSMR_V;
-#endif
-#else
-#warning "Chip Select 3 are not initialized/used"
-#endif
+	/* FlexBus Chipselect */
+	init_fbcs();
 
 #endif				/* CONFIG_MONITOR_IS_IN_RAM */
 
@@ -571,6 +533,20 @@
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	if (setclear) {
+		MCFGPIO_PASPAR |= 0x0F00;
+		MCFGPIO_PEHLPAR = CONFIG_SYS_PEHLPAR;
+	} else {
+		MCFGPIO_PASPAR &= 0xF0FF;
+		MCFGPIO_PEHLPAR &= ~CONFIG_SYS_PEHLPAR;
+	}
+	return 0;
+}
+#endif			/* CONFIG_CMD_NET */
 #endif
 
 #if defined(CONFIG_M5249)
@@ -632,17 +608,8 @@
 	mbar2_writeLong(MCFSIM_IDECONFIG1, 0x00000020);
 	mbar2_writeLong(MCFSIM_IDECONFIG2, 0x00000000);
 
-	/*
-	 *  Setup chip selects...
-	 */
-
-	mbar_writeShort(MCFSIM_CSAR1, CONFIG_SYS_CSAR1);
-	mbar_writeShort(MCFSIM_CSCR1, CONFIG_SYS_CSCR1);
-	mbar_writeLong(MCFSIM_CSMR1, CONFIG_SYS_CSMR1);
-
-	mbar_writeShort(MCFSIM_CSAR0, CONFIG_SYS_CSAR0);
-	mbar_writeShort(MCFSIM_CSCR0, CONFIG_SYS_CSCR0);
-	mbar_writeLong(MCFSIM_CSMR0, CONFIG_SYS_CSMR0);
+	/* FlexBus Chipselect */
+	init_fbcs();
 
 	/* enable instruction cache now */
 	icache_enable();
diff --git a/cpu/mcf532x/cpu.c b/cpu/mcf532x/cpu.c
index fd77939..331cc15 100644
--- a/cpu/mcf532x/cpu.c
+++ b/cpu/mcf532x/cpu.c
@@ -3,7 +3,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -56,6 +56,24 @@
 	msk = (ccm->cir >> 6);
 	ver = (ccm->cir & 0x003f);
 	switch (msk) {
+#ifdef CONFIG_MCF5301x
+	case 0x78:
+		id = 53010;
+		break;
+	case 0x77:
+		id = 53012;
+		break;
+	case 0x76:
+		id = 53015;
+		break;
+	case 0x74:
+		id = 53011;
+		break;
+	case 0x73:
+		id = 53013;
+		break;
+#endif
+#ifdef CONFIG_MCF532x
 	case 0x54:
 		id = 5329;
 		break;
@@ -77,6 +95,7 @@
 	case 0x6B:
 		id = 5372;
 		break;
+#endif
 	}
 
 	if (id) {
@@ -85,8 +104,8 @@
 		printf("Freescale MCF%d (Mask:%01x Version:%x)\n", id, msk,
 		       ver);
 		printf("       CPU CLK %s MHz BUS CLK %s MHz\n",
-		       strmhz(buf1, gd->cpu_clk)),
-		       strmhz(buf2, gd->bus_clk)));
+		       strmhz(buf1, gd->cpu_clk),
+		       strmhz(buf2, gd->bus_clk));
 	}
 
 	return 0;
diff --git a/cpu/mcf532x/cpu_init.c b/cpu/mcf532x/cpu_init.c
index d348e29..687c7e4 100644
--- a/cpu/mcf532x/cpu_init.c
+++ b/cpu/mcf532x/cpu_init.c
@@ -3,7 +3,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * (C) Copyright 2007 Freescale Semiconductor, Inc.
+ * (C) Copyright 2004-2008 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -27,16 +27,188 @@
 
 #include <common.h>
 #include <watchdog.h>
-
 #include <asm/immap.h>
 
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
+#if defined(CONFIG_CMD_NET)
+#include <config.h>
+#include <net.h>
+#include <asm/fec.h>
+#endif
+
+#ifdef CONFIG_MCF5301x
+void cpu_init_f(void)
+{
+	volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
+	volatile scm2_t *scm2 = (scm2_t *) MMAP_SCM2;
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	volatile fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
+
+	/* watchdog is enabled by default - disable the watchdog */
+#ifndef CONFIG_WATCHDOG
+	/*wdog->cr = 0; */
+#endif
+
+	scm1->mpr = 0x77777777;
+	scm1->pacra = 0;
+	scm1->pacrb = 0;
+	scm1->pacrc = 0;
+	scm1->pacrd = 0;
+	scm1->pacre = 0;
+	scm1->pacrf = 0;
+	scm1->pacrg = 0;
+
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
+     && defined(CONFIG_SYS_CS0_CTRL))
+	gpio->par_cs |= GPIO_PAR_CS0_CS0;
+	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
+	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
+	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
+#endif
+
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
+     && defined(CONFIG_SYS_CS1_CTRL))
+	gpio->par_cs |= GPIO_PAR_CS1_CS1;
+	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
+	fbcs->cscr1 = CONFIG_SYS_CS1_CTRL;
+	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
+#endif
+
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
+     && defined(CONFIG_SYS_CS2_CTRL))
+	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
+	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
+	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
+#endif
+
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
+     && defined(CONFIG_SYS_CS3_CTRL))
+	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
+	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
+	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
+#endif
+
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
+     && defined(CONFIG_SYS_CS4_CTRL))
+	gpio->par_cs |= GPIO_PAR_CS4;
+	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
+	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
+	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
+#endif
+
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
+     && defined(CONFIG_SYS_CS5_CTRL))
+	gpio->par_cs |= GPIO_PAR_CS5;
+	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
+	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
+	fbcs->csmr5 = CONFIG_SYS_CS5_MASK;
+#endif
+
+#ifdef CONFIG_FSL_I2C
+	gpio->par_feci2c = GPIO_PAR_FECI2C_SDA_SDA | GPIO_PAR_FECI2C_SCL_SCL;
+#endif
+
+	icache_enable();
+}
+
+/* initialize higher level parts of CPU like timers */
+int cpu_init_r(void)
+{
+#ifdef CONFIG_MCFFEC
+	volatile ccm_t *ccm = (ccm_t *) MMAP_CCM;
+#endif
+#ifdef CONFIG_MCFRTC
+	volatile rtc_t *rtc = (rtc_t *) (CONFIG_SYS_MCFRTC_BASE);
+	volatile rtcex_t *rtcex = (rtcex_t *) & rtc->extended;
+
+	rtcex->gocu = CONFIG_SYS_RTC_CNT;
+	rtcex->gocl = CONFIG_SYS_RTC_SETUP;
+
+#endif
+#ifdef CONFIG_MCFFEC
+	if (CONFIG_SYS_FEC0_MIIBASE != CONFIG_SYS_FEC1_MIIBASE)
+		ccm->misccr |= CCM_MISCCR_FECM;
+	else
+		ccm->misccr &= ~CCM_MISCCR_FECM;
+#endif
+
+	return (0);
+}
+
+void uart_port_conf(void)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	/* Setup Ports: */
+	switch (CONFIG_SYS_UART_PORT) {
+	case 0:
+		gpio->par_uart = (GPIO_PAR_UART_U0TXD | GPIO_PAR_UART_U0RXD);
+		break;
+	case 1:
+#ifdef CONFIG_SYS_UART1_ALT1_GPIO
+		gpio->par_simp1h &=
+		    ~(GPIO_PAR_SIMP1H_DATA1_MASK | GPIO_PAR_SIMP1H_VEN1_MASK);
+		gpio->par_simp1h |=
+		    (GPIO_PAR_SIMP1H_DATA1_U1TXD | GPIO_PAR_SIMP1H_VEN1_U1RXD);
+#elif defined(CONFIG_SYS_UART1_ALT2_GPIO)
+		gpio->par_ssih &=
+		    ~(GPIO_PAR_SSIH_RXD_MASK | GPIO_PAR_SSIH_TXD_MASK);
+		gpio->par_ssih |=
+		    (GPIO_PAR_SSIH_RXD_U1RXD | GPIO_PAR_SSIH_TXD_U1TXD);
+#endif
+		break;
+	case 2:
+#ifdef CONFIG_SYS_UART2_PRI_GPIO
+		gpio->par_uart |= (GPIO_PAR_UART_U2TXD | GPIO_PAR_UART_U2RXD);
+#elif defined(CONFIG_SYS_UART2_ALT1_GPIO)
+		gpio->par_dspih &=
+		    ~(GPIO_PAR_DSPIH_SIN_MASK | GPIO_PAR_DSPIH_SOUT_MASK);
+		gpio->par_dspih |=
+		    (GPIO_PAR_DSPIH_SIN_U2RXD | GPIO_PAR_DSPIH_SOUT_U2TXD);
+#elif defined(CONFIG_SYS_UART2_ALT2_GPIO)
+		gpio->par_feci2c &=
+		    ~(GPIO_PAR_FECI2C_SDA_MASK | GPIO_PAR_FECI2C_SCL_MASK);
+		gpio->par_feci2c |=
+		    (GPIO_PAR_FECI2C_SDA_U2TXD | GPIO_PAR_FECI2C_SCL_U2RXD);
+#endif
+		break;
+	}
+}
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
+
+	if (setclear) {
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
+			gpio->par_fec |=
+			    GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC;
+			gpio->par_feci2c |=
+			    GPIO_PAR_FECI2C_MDC0 | GPIO_PAR_FECI2C_MDIO0;
+		} else {
+			gpio->par_fec |=
+			    GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC;
+			gpio->par_feci2c |=
+			    GPIO_PAR_FECI2C_MDC1 | GPIO_PAR_FECI2C_MDIO1;
+		}
+	} else {
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE) {
+			gpio->par_fec &=
+			    ~(GPIO_PAR_FEC0_7W_FEC | GPIO_PAR_FEC0_RMII_FEC);
+			gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII0_MASK;
+		} else {
+			gpio->par_fec &=
+			    ~(GPIO_PAR_FEC1_7W_FEC | GPIO_PAR_FEC1_RMII_FEC);
+			gpio->par_feci2c &= GPIO_PAR_FECI2C_RMII1_MASK;
+		}
+	}
+	return 0;
+}
+#endif				/* CONFIG_CMD_NET */
+#endif				/* CONFIG_MCF5301x */
+
+#ifdef CONFIG_MCF532x
 void cpu_init_f(void)
 {
 	volatile scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
@@ -63,13 +235,15 @@
 	/* Port configuration */
 	gpio->par_cs = 0;
 
-#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
+#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) \
+     && defined(CONFIG_SYS_CS0_CTRL))
 	fbcs->csar0 = CONFIG_SYS_CS0_BASE;
 	fbcs->cscr0 = CONFIG_SYS_CS0_CTRL;
 	fbcs->csmr0 = CONFIG_SYS_CS0_MASK;
 #endif
 
-#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) && defined(CONFIG_SYS_CS1_CTRL))
+#if (defined(CONFIG_SYS_CS1_BASE) && defined(CONFIG_SYS_CS1_MASK) \
+     && defined(CONFIG_SYS_CS1_CTRL))
 	/* Latch chipselect */
 	gpio->par_cs |= GPIO_PAR_CS1;
 	fbcs->csar1 = CONFIG_SYS_CS1_BASE;
@@ -77,28 +251,32 @@
 	fbcs->csmr1 = CONFIG_SYS_CS1_MASK;
 #endif
 
-#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) && defined(CONFIG_SYS_CS2_CTRL))
+#if (defined(CONFIG_SYS_CS2_BASE) && defined(CONFIG_SYS_CS2_MASK) \
+     && defined(CONFIG_SYS_CS2_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS2;
 	fbcs->csar2 = CONFIG_SYS_CS2_BASE;
 	fbcs->cscr2 = CONFIG_SYS_CS2_CTRL;
 	fbcs->csmr2 = CONFIG_SYS_CS2_MASK;
 #endif
 
-#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) && defined(CONFIG_SYS_CS3_CTRL))
+#if (defined(CONFIG_SYS_CS3_BASE) && defined(CONFIG_SYS_CS3_MASK) \
+     && defined(CONFIG_SYS_CS3_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS3;
 	fbcs->csar3 = CONFIG_SYS_CS3_BASE;
 	fbcs->cscr3 = CONFIG_SYS_CS3_CTRL;
 	fbcs->csmr3 = CONFIG_SYS_CS3_MASK;
 #endif
 
-#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) && defined(CONFIG_SYS_CS4_CTRL))
+#if (defined(CONFIG_SYS_CS4_BASE) && defined(CONFIG_SYS_CS4_MASK) \
+     && defined(CONFIG_SYS_CS4_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS4;
 	fbcs->csar4 = CONFIG_SYS_CS4_BASE;
 	fbcs->cscr4 = CONFIG_SYS_CS4_CTRL;
 	fbcs->csmr4 = CONFIG_SYS_CS4_MASK;
 #endif
 
-#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) && defined(CONFIG_SYS_CS5_CTRL))
+#if (defined(CONFIG_SYS_CS5_BASE) && defined(CONFIG_SYS_CS5_MASK) \
+     && defined(CONFIG_SYS_CS5_CTRL))
 	gpio->par_cs |= GPIO_PAR_CS5;
 	fbcs->csar5 = CONFIG_SYS_CS5_BASE;
 	fbcs->cscr5 = CONFIG_SYS_CS5_CTRL;
@@ -139,3 +317,22 @@
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+	if (setclear) {
+		gpio->par_fec |= GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC;
+		gpio->par_feci2c |=
+		    GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO;
+	} else {
+		gpio->par_fec &= ~(GPIO_PAR_FEC_7W_FEC | GPIO_PAR_FEC_MII_FEC);
+		gpio->par_feci2c &=
+		    ~(GPIO_PAR_FECI2C_MDC_EMDC | GPIO_PAR_FECI2C_MDIO_EMDIO);
+	}
+	return 0;
+}
+#endif
+#endif				/* CONFIG_MCF532x */
diff --git a/cpu/mcf532x/speed.c b/cpu/mcf532x/speed.c
index 1e40374..0d378e6 100644
--- a/cpu/mcf532x/speed.c
+++ b/cpu/mcf532x/speed.c
@@ -3,7 +3,7 @@
  * (C) Copyright 2000-2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
  * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
  *
  * See file CREDITS for list of people who contributed to this
@@ -36,26 +36,33 @@
 #define MAX_FVCO	500000	/* KHz */
 #define MAX_FSYS	80000	/* KHz */
 #define MIN_FSYS	58333	/* KHz */
+
+#ifdef CONFIG_MCF5301x
+#define FREF		20000	/* KHz */
+#define MAX_MFD		63	/* Multiplier */
+#define MIN_MFD		0	/* Multiplier */
+#define USBDIV		8
+
+/* Low Power Divider specifications */
+#define MIN_LPD		(0)	/* Divider (not encoded) */
+#define MAX_LPD		(15)	/* Divider (not encoded) */
+#define DEFAULT_LPD	(0)	/* Divider (not encoded) */
+#endif
+
+#ifdef CONFIG_MCF532x
 #define FREF		16000	/* KHz */
 #define MAX_MFD		135	/* Multiplier */
 #define MIN_MFD		88	/* Multiplier */
-#define BUSDIV		6	/* Divider */
-/*
- * Low Power Divider specifications
- */
+
+/* Low Power Divider specifications */
 #define MIN_LPD		(1 << 0)	/* Divider (not encoded) */
 #define MAX_LPD		(1 << 15)	/* Divider (not encoded) */
 #define DEFAULT_LPD	(1 << 1)	/* Divider (not encoded) */
+#endif
 
-/*
- * Get the value of the current system clock
- *
- * Parameters:
- *  none
- *
- * Return Value:
- *  The current output system frequency
- */
+#define BUSDIV		6	/* Divider */
+
+/* Get the value of the current system clock */
 int get_sys_clock(void)
 {
 	volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM);
@@ -65,9 +72,23 @@
 	/* Test to see if device is in LIMP mode */
 	if (ccm->misccr & CCM_MISCCR_LIMP) {
 		divider = ccm->cdr & CCM_CDR_LPDIV(0xF);
+#ifdef CONFIG_MCF5301x
+		return (FREF / (3 * (1 << divider)));
+#endif
+#ifdef CONFIG_MCF532x
 		return (FREF / (2 << divider));
+#endif
 	} else {
+#ifdef CONFIG_MCF5301x
+		u32 pfdr = (pll->pcr & 0x3F) + 1;
+		u32 refdiv = (1 << ((pll->pcr & PLL_PCR_REFDIV(7)) >> 8));
+		u32 busdiv = ((pll->pdr & 0x00F0) >> 4) + 1;
+
+		return (((FREF * pfdr) / refdiv) / busdiv);
+#endif
+#ifdef CONFIG_MCF532x
 		return ((FREF * pll->pfdr) / (BUSDIV * 4));
+#endif
 	}
 }
 
@@ -92,7 +113,7 @@
 		div = MAX_LPD;
 
 	/* Save of the current value of the SSIDIV so we don't overwrite the value */
-	temp = (ccm->cdr & CCM_CDR_SSIDIV(0xF));
+	temp = (ccm->cdr & CCM_CDR_SSIDIV(0xFF));
 
 	/* Apply the divider to the system clock */
 	ccm->cdr = (CCM_CDR_LPDIV(div) | CCM_CDR_SSIDIV(temp));
@@ -102,15 +123,7 @@
 	return (FREF / (3 * (1 << div)));
 }
 
-/*
- * Exit low power LIMP mode
- *
- * Parameters:
- *  div     Desired system frequency divider
- *
- * Return Value:
- *  The resulting output system frequency
- */
+/* Exit low power LIMP mode */
 int clock_exit_limp(void)
 {
 	volatile ccm_t *ccm = (volatile ccm_t *)(MMAP_CCM);
@@ -139,7 +152,10 @@
  */
 int clock_pll(int fsys, int flags)
 {
+#ifdef CONFIG_MCF532x
 	volatile u32 *sdram_workaround = (volatile u32 *)(MMAP_SDRAM + 0x80);
+#endif
+	volatile sdram_t *sdram = (volatile sdram_t *)(MMAP_SDRAM);
 	volatile pll_t *pll = (volatile pll_t *)(MMAP_PLL);
 	int fref, temp, fout, mfd;
 	u32 i;
@@ -148,9 +164,17 @@
 
 	if (fsys == 0) {
 		/* Return current PLL output */
+#ifdef CONFIG_MCF5301x
+		u32 busdiv = ((pll->pdr >> 4) & 0x0F) + 1;
+		mfd = (pll->pcr & 0x3F) + 1;
+
+		return (fref * mfd) / busdiv;
+#endif
+#ifdef CONFIG_MCF532x
 		mfd = pll->pfdr;
 
 		return (fref * mfd / (BUSDIV * 4));
+#endif
 	}
 
 	/* Check bounds of requested system clock */
@@ -160,21 +184,33 @@
 	if (fsys < MIN_FSYS)
 		fsys = MIN_FSYS;
 
-	/* Multiplying by 100 when calculating the temp value,
-	   and then dividing by 100 to calculate the mfd allows
-	   for exact values without needing to include floating
-	   point libraries. */
+	/*
+	 * Multiplying by 100 when calculating the temp value,
+	 * and then dividing by 100 to calculate the mfd allows
+	 * for exact values without needing to include floating
+	 * point libraries.
+	 */
 	temp = (100 * fsys) / fref;
+#ifdef CONFIG_MCF5301x
+	mfd = (BUSDIV * temp) / 100;
+
+	/* Determine the output frequency for selected values */
+	fout = ((fref * mfd) / BUSDIV);
+#endif
+#ifdef CONFIG_MCF532x
 	mfd = (4 * BUSDIV * temp) / 100;
 
 	/* Determine the output frequency for selected values */
 	fout = ((fref * mfd) / (BUSDIV * 4));
+#endif
 
 	/*
 	 * Check to see if the SDRAM has already been initialized.
 	 * If it has then the SDRAM needs to be put into self refresh
 	 * mode before reprogramming the PLL.
 	 */
+	if (sdram->ctrl & SDRAMC_SDCR_REF)
+		sdram->ctrl &= ~SDRAMC_SDCR_CKE;
 
 	/*
 	 * Initialize the PLL to generate the new system clock frequency.
@@ -184,20 +220,37 @@
 	/* Enter LIMP mode */
 	clock_limp(DEFAULT_LPD);
 
+#ifdef CONFIG_MCF5301x
+	pll->pdr =
+	    PLL_PDR_OUTDIV1((BUSDIV / 3) - 1)	|
+	    PLL_PDR_OUTDIV2(BUSDIV - 1)	|
+	    PLL_PDR_OUTDIV3((BUSDIV / 2) - 1)	|
+	    PLL_PDR_OUTDIV4(USBDIV - 1);
+
+	pll->pcr &= PLL_PCR_FBDIV_MASK;
+	pll->pcr |= PLL_PCR_FBDIV(mfd - 1);
+#endif
+#ifdef CONFIG_MCF532x
 	/* Reprogram PLL for desired fsys */
 	pll->podr = (PLL_PODR_CPUDIV(BUSDIV / 3) | PLL_PODR_BUSDIV(BUSDIV));
 
 	pll->pfdr = mfd;
+#endif
 
 	/* Exit LIMP mode */
 	clock_exit_limp();
 
-	/*
-	 * Return the SDRAM to normal operation if it is in use.
-	 */
+	/* Return the SDRAM to normal operation if it is in use. */
+	if (sdram->ctrl & SDRAMC_SDCR_REF)
+		sdram->ctrl |= SDRAMC_SDCR_CKE;
 
-	/* software workaround for SDRAM opeartion after exiting LIMP mode errata */
+#ifdef CONFIG_MCF532x
+	/*
+	 * software workaround for SDRAM opeartion after exiting LIMP
+	 * mode errata
+	 */
 	*sdram_workaround = CONFIG_SYS_SDRAM_BASE;
+#endif
 
 	/* wait for DQS logic to relock */
 	for (i = 0; i < 0x200; i++) ;
@@ -205,9 +258,7 @@
 	return fout;
 }
 
-/*
- * get_clocks() fills in gd->cpu_clock and gd->bus_clk
- */
+/* get_clocks() fills in gd->cpu_clock and gd->bus_clk */
 int get_clocks(void)
 {
 	gd->bus_clk = clock_pll(CONFIG_SYS_CLK / 1000, 0) * 1000;
diff --git a/cpu/mcf532x/start.S b/cpu/mcf532x/start.S
index 7a3eb5f..8fa605a 100644
--- a/cpu/mcf532x/start.S
+++ b/cpu/mcf532x/start.S
@@ -2,6 +2,9 @@
  * Copyright (C) 2003	Josef Baumgartner <josef.baumgartner@telex.de>
  * Based on code from Bernhard Kuhn <bkuhn@metrowerks.com>
  *
+ * (C) Copyright 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -140,6 +143,14 @@
 	movec	%d0, %ACR0
 	movec	%d0, %ACR1
 
+#ifdef CONFIG_MCF5301x
+	move.l	#(0xFC0a0010), %a0
+	move.w	(%a0), %d0
+	and.l	%d0, 0xEFFF
+
+	move.w	%d0, (%a0)
+#endif
+
 	/* initialize general use internal ram */
 	move.l #0, %d0
 	move.l #(CONFIG_SYS_INIT_RAM_ADDR+CONFIG_SYS_INIT_RAM_END-8), %a1
diff --git a/cpu/mcf5445x/cpu_init.c b/cpu/mcf5445x/cpu_init.c
index 50b4561..7e04e32 100644
--- a/cpu/mcf5445x/cpu_init.c
+++ b/cpu/mcf5445x/cpu_init.c
@@ -27,10 +27,15 @@
 
 #include <common.h>
 #include <watchdog.h>
-
 #include <asm/immap.h>
 #include <asm/rtc.h>
 
+#if defined(CONFIG_CMD_NET)
+#include <config.h>
+#include <net.h>
+#include <asm/fec.h>
+#endif
+
 /*
  * Breath some life into the CPU...
  *
@@ -139,3 +144,30 @@
 		break;
 	}
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	struct fec_info_s *info = (struct fec_info_s *)dev->priv;
+
+	if (setclear) {
+		gpio->par_feci2c |=
+		    (GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
+
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
+			gpio->par_fec |= GPIO_PAR_FEC_FEC0_RMII_GPIO;
+		else
+			gpio->par_fec |= GPIO_PAR_FEC_FEC1_RMII_ATA;
+	} else {
+		gpio->par_feci2c &=
+		    ~(GPIO_PAR_FECI2C_MDC0_MDC0 | GPIO_PAR_FECI2C_MDIO0_MDIO0);
+
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
+			gpio->par_fec &= GPIO_PAR_FEC_FEC0_MASK;
+		else
+			gpio->par_fec &= GPIO_PAR_FEC_FEC1_MASK;
+	}
+	return 0;
+}
+#endif
diff --git a/cpu/mcf547x_8x/cpu_init.c b/cpu/mcf547x_8x/cpu_init.c
index 9a0e040..1ba5783 100644
--- a/cpu/mcf547x_8x/cpu_init.c
+++ b/cpu/mcf547x_8x/cpu_init.c
@@ -29,6 +29,12 @@
 #include <MCD_dma.h>
 #include <asm/immap.h>
 
+#if defined(CONFIG_CMD_NET)
+#include <config.h>
+#include <net.h>
+#include <asm/fsl_mcdmafec.h>
+#endif
+
 /*
  * Breath some life into the CPU...
  *
@@ -130,3 +136,24 @@
 
 	*pscsicr &= 0xF8;
 }
+
+#if defined(CONFIG_CMD_NET)
+int fecpin_setclear(struct eth_device *dev, int setclear)
+{
+	volatile gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+	struct fec_info_dma *info = (struct fec_info_dma *)dev->priv;
+
+	if (setclear) {
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
+			gpio->par_feci2cirq |= 0xF000;
+		else
+			gpio->par_feci2cirq |= 0x0FC0;
+	} else {
+		if (info->iobase == CONFIG_SYS_FEC0_IOBASE)
+			gpio->par_feci2cirq &= 0x0FFF;
+		else
+			gpio->par_feci2cirq &= 0xF03F;
+	}
+	return 0;
+}
+#endif
diff --git a/doc/README.m53017evb b/doc/README.m53017evb
new file mode 100644
index 0000000..60cfa95
--- /dev/null
+++ b/doc/README.m53017evb
@@ -0,0 +1,181 @@
+Freescale MCF53017EVB ColdFire Development Board
+================================================
+
+TsiChung Liew(Tsi-Chung.Liew@freescale.com)
+Created 10/22/08
+===========================================
+
+
+Changed files:
+==============
+
+- board/freescale/m53017evb/m53017evb.c	Dram setup
+- board/freescale/m53017evb/mii.c	Mii access
+- board/freescale/m53017evb/Makefile	Makefile
+- board/freescale/m53017evb/config.mk	config make
+- board/freescale/m53017evb/u-boot.lds	Linker description
+
+- cpu/mcf532x/cpu.c			cpu specific code
+- cpu/mcf532x/cpu_init.c		FBCS, Mux pins, icache and RTC extra regs
+- cpu/mcf532x/interrupts.c		cpu specific interrupt support
+- cpu/mcf532x/speed.c			system, flexbus, and cpu clock
+- cpu/mcf532x/Makefile			Makefile
+- cpu/mcf532x/config.mk			config make
+- cpu/mcf532x/start.S			start up assembly code
+
+- doc/README.m53017evb			This readme file
+
+- drivers/net/mcffec.c			ColdFire common FEC driver
+- drivers/net/mcfmii.c			ColdFire common Mii driver
+- drivers/serial/mcfuart.c		ColdFire common UART driver
+- drivers/rtc/mcfrtc.c			Realtime clock Driver
+
+- include/asm-m68k/bitops.h		Bit operation function export
+- include/asm-m68k/byteorder.h		Byte order functions
+- include/asm-m68k/fec.h		FEC structure and definition
+- include/asm-m68k/fsl_i2c.h		I2C structure and definition
+- include/asm-m68k/global_data.h	Global data structure
+- include/asm-m68k/immap.h		ColdFire specific header file and driver macros
+- include/asm-m68k/immap_5301x.h	mcf5301x specific header file
+- include/asm-m68k/io.h			io functions
+- include/asm-m68k/m532x.h		mcf5301x specific header file
+- include/asm-m68k/posix_types.h	Posix
+- include/asm-m68k/processor.h		header file
+- include/asm-m68k/ptrace.h		Exception structure
+- include/asm-m68k/rtc.h		Realtime clock header file
+- include/asm-m68k/string.h		String function export
+- include/asm-m68k/timer.h		Timer structure and definition
+- include/asm-m68k/types.h		Data types definition
+- include/asm-m68k/uart.h		Uart structure and definition
+- include/asm-m68k/u-boot.h		u-boot structure
+
+- include/configs/M53017EVB.h		Board specific configuration file
+
+- lib_m68k/board.c			board init function
+- lib_m68k/cache.c
+- lib_m68k/interrupts			Coldfire common interrupt functions
+- lib_m68k/m68k_linux.c
+- lib_m68k/time.c			Timer functions (Dma timer and PIT)
+- lib_m68k/traps.c			Exception init code
+
+1 MCF5301x specific Options/Settings
+====================================
+1.1 pre-loader is no longer suppoer in thie coldfire family
+
+1.2 Configuration settings for M53017EVB Development Board
+CONFIG_MCF5301x			-- define for all MCF5301x CPUs
+CONFIG_M53015			-- define for MCF53015 CPUs
+CONFIG_M53017EVB		-- define for M53017EVB board
+
+CONFIG_MCFUART			-- define to use common CF Uart driver
+CONFIG_SYS_UART_PORT		-- define UART port number, start with 0, 1 and 2
+CONFIG_BAUDRATE			-- define UART baudrate
+
+CONFIG_MCFRTC			-- define to use common CF RTC driver
+CONFIG_SYS_MCFRTC_BASE		-- provide base address for RTC in immap.h
+CONFIG_SYS_RTC_OSCILLATOR	-- define RTC clock frequency
+RTC_DEBUG			-- define to show RTC debug message
+CONFIG_CMD_DATE			-- enable to use date feature in u-boot
+
+CONFIG_MCFFEC			-- define to use common CF FEC driver
+CONFIG_NET_MULTI		-- define to use multi FEC in u-boot
+CONFIG_MII			-- enable to use MII driver
+CONFIG_CF_DOMII			-- enable to use MII feature in cmd_mii.c
+CONFIG_SYS_DISCOVER_PHY		-- enable PHY discovery
+CONFIG_SYS_RX_ETH_BUFFER	-- Set FEC Receive buffer
+CONFIG_SYS_FAULT_ECHO_LINK_DOWN	--
+CONFIG_SYS_FEC0_PINMUX		-- Set FEC0 Pin configuration
+CONFIG_SYS_FEC0_MIIBASE		-- Set FEC0 MII base register
+MCFFEC_TOUT_LOOP		-- set FEC timeout loop
+
+CONFIG_MCFTMR			-- define to use DMA timer
+CONFIG_MCFPIT			-- define to use PIT timer
+
+CONFIG_FSL_I2C			-- define to use FSL common I2C driver
+CONFIG_HARD_I2C			-- define for I2C hardware support
+CONFIG_SOFT_I2C			-- define for I2C bit-banged
+CONFIG_SYS_I2C_SPEED		-- define for I2C speed
+CONFIG_SYS_I2C_SLAVE		-- define for I2C slave address
+CONFIG_SYS_I2C_OFFSET		-- define for I2C base address offset
+CONFIG_SYS_IMMR			-- define for MBAR offset
+
+CONFIG_SYS_MBAR			-- define MBAR offset
+
+CONFIG_MONITOR_IS_IN_RAM 	-- Not support
+
+CONFIG_SYS_INIT_RAM_ADDR	-- defines the base address of the MCF5301x internal SRAM
+
+CONFIG_SYS_CSn_BASE		-- defines the Chip Select Base register
+CONFIG_SYS_CSn_MASK		-- defines the Chip Select Mask register
+CONFIG_SYS_CSn_CTRL		-- defines the Chip Select Control register
+
+CONFIG_SYS_SDRAM_BASE		-- defines the DRAM Base
+
+2. MEMORY MAP UNDER U-BOOT AND LINUX KERNEL
+===========================================
+2.1. System memory map:
+	Flash:		0x00000000-0x3FFFFFFF (1024MB)
+	DDR:		0x40000000-0x7FFFFFFF (1024MB)
+	SRAM:		0x80000000-0x8FFFFFFF (256MB)
+	IP:		0xFC000000-0xFFFFFFFF (256MB)
+
+2.2. For the initial bringup, we adopted a consistent memory scheme between u-boot and
+	linux kernel, you can customize it based on your system requirements:
+	Flash0:		0x00000000-0x00FFFFFF (16MB)
+	DDR:		0x40000000-0x4FFFFFFF (256MB)
+	SRAM:		0x80000000-0x80007FFF (32KB)
+	IP:		0xFC000000-0xFC0FFFFF (64KB)
+
+3. COMPILATION
+==============
+3.1	To create U-Boot the gcc-4.x-xx compiler set (ColdFire ELF or
+uClinux version) from codesourcery.com was used. Download it from:
+http://www.codesourcery.com/gnu_toolchains/coldfire/download.html
+
+3.2 Compilation
+   export CROSS_COMPILE=cross-compile-prefix
+   cd u-boot
+   make distclean
+   make M53017EVB_config
+   make
+
+4. SCREEN DUMP
+==============
+4.1 M53017EVB Development board
+    (NOTE: May not show exactly the same)
+
+U-Boot 2008.10 (Oct 22 2007 - 11:07:57)
+
+CPU:   Freescale MCF53015 (Mask:76 Version:0)
+       CPU CLK 240 Mhz BUS CLK 80 Mhz
+Board: Freescale M53017EVB
+I2C:   ready
+DRAM:  64 MB
+FLASH: 16 MB
+In:    serial
+Out:   serial
+Err:   serial
+NAND:  16 MiB
+Net:   FEC0, FEC1
+-> print
+bootdelay=1
+baudrate=115200
+ethaddr=00:e0:0c:bc:e5:60
+hostname=M53017EVB
+netdev=eth0
+loadaddr=40010000
+u-boot=u-boot.bin
+load=tftp ${loadaddr) ${u-boot}
+upd=run load; run prog
+prog=prot off 0 3ffff;era 0 3ffff;cp.b ${loadaddr} 0 ${filesize};save
+gatewayip=192.168.1.1
+netmask=255.255.255.0
+ipaddr=192.168.1.3
+serverip=192.168.1.2
+stdin=serial
+stdout=serial
+stderr=serial
+mem=65024k
+
+Environment size: 437/4092 bytes
+->
diff --git a/include/asm-m68k/coldfire/ata.h b/include/asm-m68k/coldfire/ata.h
new file mode 100644
index 0000000..3efd03a
--- /dev/null
+++ b/include/asm-m68k/coldfire/ata.h
@@ -0,0 +1,79 @@
+/*
+ * ATA Internal Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ATA_H__
+#define __ATA_H__
+
+/* ATA */
+typedef struct atac {
+	/* PIO */
+	u8 toff;		/* 0x00 */
+	u8 ton;			/* 0x01 */
+	u8 t1;			/* 0x02 */
+	u8 t2w;			/* 0x03 */
+	u8 t2r;			/* 0x04 */
+	u8 ta;			/* 0x05 */
+	u8 trd;			/* 0x06 */
+	u8 t4;			/* 0x07 */
+	u8 t9;			/* 0x08 */
+
+	/* DMA */
+	u8 tm;			/* 0x09 */
+	u8 tn;			/* 0x0A */
+	u8 td;			/* 0x0B */
+	u8 tk;			/* 0x0C */
+	u8 tack;		/* 0x0D */
+	u8 tenv;		/* 0x0E */
+	u8 trp;			/* 0x0F */
+	u8 tzah;		/* 0x10 */
+	u8 tmli;		/* 0x11 */
+	u8 tdvh;		/* 0x12 */
+	u8 tdzfs;		/* 0x13 */
+	u8 tdvs;		/* 0x14 */
+	u8 tcvh;		/* 0x15 */
+	u8 tss;			/* 0x16 */
+	u8 tcyc;		/* 0x17 */
+
+	/* FIFO */
+	u32 fifo32;		/* 0x18 */
+	u16 fifo16;		/* 0x1C */
+	u8 rsvd0[2];
+	u8 ffill;		/* 0x20 */
+	u8 rsvd1[3];
+
+	/* ATA */
+	u8 cr;			/* 0x24 */
+	u8 rsvd2[3];
+	u8 isr;			/* 0x28 */
+	u8 rsvd3[3];
+	u8 ier;			/* 0x2C */
+	u8 rsvd4[3];
+	u8 icr;			/* 0x30 */
+	u8 rsvd5[3];
+	u8 falarm;		/* 0x34 */
+	u8 rsvd6[106];
+} atac_t;
+
+#endif				/* __ATA_H__ */
diff --git a/include/asm-m68k/coldfire/dspi.h b/include/asm-m68k/coldfire/dspi.h
index 8327e1b..4b7d61e 100644
--- a/include/asm-m68k/coldfire/dspi.h
+++ b/include/asm-m68k/coldfire/dspi.h
@@ -46,15 +46,14 @@
 	u32 dirsr;
 	u32 dtfr;
 	u32 drfr;
-	u32 dtfdr0;
-	u32 dtfdr1;
-	u32 dtfdr2;
-	u32 dtfdr3;
+#ifdef CONFIG_MCF547x_8x
+	u32 dtfdr[4];
 	u8 resv1[0x30];
-	u32 drfdr0;
-	u32 drfdr1;
-	u32 drfdr2;
-	u32 drfdr3;
+	u32 drfdr[4];
+#else
+	u32 dtfdr[16];
+	u32 drfdr[16];
+#endif
 } dspi_t;
 
 /* Bit definitions and macros for DMCR */
diff --git a/include/asm-m68k/coldfire/eport.h b/include/asm-m68k/coldfire/eport.h
new file mode 100644
index 0000000..1d1bf63
--- /dev/null
+++ b/include/asm-m68k/coldfire/eport.h
@@ -0,0 +1,139 @@
+/*
+ * Edge Port Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __EPORT_H__
+#define __EPORT_H__
+
+/* Edge Port Module (EPORT) */
+typedef struct eport {
+#ifdef CONFIG_MCF547x_8x
+	u16 par;	/* 0x00 */
+	u16 res0;	/* 0x02 */
+	u8 ddr;		/* 0x04 */
+	u8 ier;		/* 0x05 */
+	u16 res1;	/* 0x06 */
+	u8 dr;		/* 0x08 */
+	u8 pdr;		/* 0x09 */
+	u16 res2;	/* 0x0A */
+	u8 fr;		/* 0x0C */
+	u8 res3[3];	/* 0x0D */
+#else
+	u16 par;	/* 0x00 Pin Assignment */
+	u8 ddr;		/* 0x02 Data Direction */
+	u8 ier;		/* 0x03 Interrupt Enable */
+	u8 dr;		/* 0x04 Data */
+	u8 pdr;		/* 0x05 Pin Data */
+	u8 fr;		/* 0x06 Flag */
+	u8 res0;
+#endif
+} eport_t;
+
+/* EPPAR */
+#define EPORT_PAR_EPPA1(x)		(((x)&0x0003)<<2)
+#define EPORT_PAR_EPPA2(x)		(((x)&0x0003)<<4)
+#define EPORT_PAR_EPPA3(x)		(((x)&0x0003)<<6)
+#define EPORT_PAR_EPPA4(x)		(((x)&0x0003)<<8)
+#define EPORT_PAR_EPPA5(x)		(((x)&0x0003)<<10)
+#define EPORT_PAR_EPPA6(x)		(((x)&0x0003)<<12)
+#define EPORT_PAR_EPPA7(x)		(((x)&0x0003)<<14)
+#define EPORT_PAR_LEVEL			(0)
+#define EPORT_PAR_RISING		(1)
+#define EPORT_PAR_FALLING		(2)
+#define EPORT_PAR_BOTH			(3)
+#define EPORT_PAR_EPPA7_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA7_RISING		(0x4000)
+#define EPORT_PAR_EPPA7_FALLING		(0x8000)
+#define EPORT_PAR_EPPA7_BOTH		(0xC000)
+#define EPORT_PAR_EPPA6_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA6_RISING		(0x1000)
+#define EPORT_PAR_EPPA6_FALLING		(0x2000)
+#define EPORT_PAR_EPPA6_BOTH		(0x3000)
+#define EPORT_PAR_EPPA5_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA5_RISING		(0x0400)
+#define EPORT_PAR_EPPA5_FALLING		(0x0800)
+#define EPORT_PAR_EPPA5_BOTH		(0x0C00)
+#define EPORT_PAR_EPPA4_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA4_RISING		(0x0100)
+#define EPORT_PAR_EPPA4_FALLING		(0x0200)
+#define EPORT_PAR_EPPA4_BOTH		(0x0300)
+#define EPORT_PAR_EPPA3_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA3_RISING		(0x0040)
+#define EPORT_PAR_EPPA3_FALLING		(0x0080)
+#define EPORT_PAR_EPPA3_BOTH		(0x00C0)
+#define EPORT_PAR_EPPA2_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA2_RISING		(0x0010)
+#define EPORT_PAR_EPPA2_FALLING		(0x0020)
+#define EPORT_PAR_EPPA2_BOTH		(0x0030)
+#define EPORT_PAR_EPPA1_LEVEL		(0x0000)
+#define EPORT_PAR_EPPA1_RISING		(0x0004)
+#define EPORT_PAR_EPPA1_FALLING		(0x0008)
+#define EPORT_PAR_EPPA1_BOTH		(0x000C)
+
+/* EPDDR */
+#define EPORT_DDR_EPDD1			(0x02)
+#define EPORT_DDR_EPDD2			(0x04)
+#define EPORT_DDR_EPDD3			(0x08)
+#define EPORT_DDR_EPDD4			(0x10)
+#define EPORT_DDR_EPDD5			(0x20)
+#define EPORT_DDR_EPDD6			(0x40)
+#define EPORT_DDR_EPDD7			(0x80)
+
+/* EPIER */
+#define EPORT_IER_EPIE1			(0x02)
+#define EPORT_IER_EPIE2			(0x04)
+#define EPORT_IER_EPIE3			(0x08)
+#define EPORT_IER_EPIE4			(0x10)
+#define EPORT_IER_EPIE5			(0x20)
+#define EPORT_IER_EPIE6			(0x40)
+#define EPORT_IER_EPIE7			(0x80)
+
+/* EPDR */
+#define EPORT_DR_EPD1			(0x02)
+#define EPORT_DR_EPD2			(0x04)
+#define EPORT_DR_EPD3			(0x08)
+#define EPORT_DR_EPD4			(0x10)
+#define EPORT_DR_EPD5			(0x20)
+#define EPORT_DR_EPD6			(0x40)
+#define EPORT_DR_EPD7			(0x80)
+
+/* EPPDR */
+#define EPORT_PDR_EPPD1			(0x02)
+#define EPORT_PDR_EPPD2			(0x04)
+#define EPORT_PDR_EPPD3			(0x08)
+#define EPORT_PDR_EPPD4			(0x10)
+#define EPORT_PDR_EPPD5			(0x20)
+#define EPORT_PDR_EPPD6			(0x40)
+#define EPORT_PDR_EPPD7			(0x80)
+
+/* EPFR */
+#define EPORT_FR_EPF1			(0x02)
+#define EPORT_FR_EPF2			(0x04)
+#define EPORT_FR_EPF3			(0x08)
+#define EPORT_FR_EPF4			(0x10)
+#define EPORT_FR_EPF5			(0x20)
+#define EPORT_FR_EPF6			(0x40)
+#define EPORT_FR_EPF7			(0x80)
+
+#endif				/* __EPORT_H__ */
diff --git a/include/asm-m68k/coldfire/flexbus.h b/include/asm-m68k/coldfire/flexbus.h
index 1d902c0..51cbbd8 100644
--- a/include/asm-m68k/coldfire/flexbus.h
+++ b/include/asm-m68k/coldfire/flexbus.h
@@ -31,33 +31,36 @@
 *********************************************************************/
 
 typedef struct fbcs {
-	u32 csar0;		/* Chip-select Address Register */
-	u32 csmr0;		/* Chip-select Mask Register */
-	u32 cscr0;		/* Chip-select Control Register */
-	u32 csar1;		/* Chip-select Address Register */
-	u32 csmr1;		/* Chip-select Mask Register */
-	u32 cscr1;		/* Chip-select Control Register */
-	u32 csar2;		/* Chip-select Address Register */
-	u32 csmr2;		/* Chip-select Mask Register */
-	u32 cscr2;		/* Chip-select Control Register */
-	u32 csar3;		/* Chip-select Address Register */
-	u32 csmr3;		/* Chip-select Mask Register */
-	u32 cscr3;		/* Chip-select Control Register */
-	u32 csar4;		/* Chip-select Address Register */
-	u32 csmr4;		/* Chip-select Mask Register */
-	u32 cscr4;		/* Chip-select Control Register */
-	u32 csar5;		/* Chip-select Address Register */
-	u32 csmr5;		/* Chip-select Mask Register */
-	u32 cscr5;		/* Chip-select Control Register */
+	u32 csar0;		/* Chip-select Address */
+	u32 csmr0;		/* Chip-select Mask */
+	u32 cscr0;		/* Chip-select Control */
+	u32 csar1;
+	u32 csmr1;
+	u32 cscr1;
+	u32 csar2;
+	u32 csmr2;
+	u32 cscr2;
+	u32 csar3;
+	u32 csmr3;
+	u32 cscr3;
+	u32 csar4;
+	u32 csmr4;
+	u32 cscr4;
+	u32 csar5;
+	u32 csmr5;
+	u32 cscr5;
+	u32 csar6;
+	u32 csmr6;
+	u32 cscr6;
+	u32 csar7;
+	u32 csmr7;
+	u32 cscr7;
 } fbcs_t;
 
-/* Bit definitions and macros for CSAR group */
-#define FBCS_CSAR_BA(x)			((x)&0xFFFF0000)
+#define FBCS_CSAR_BA(x)			((x) & 0xFFFF0000)
 
-/* Bit definitions and macros for CSMR group */
-#define FBCS_CSMR_V			(0x00000001)	/* Valid bit */
-#define FBCS_CSMR_WP			(0x00000100)	/* Write protect */
-#define FBCS_CSMR_BAM(x)		(((x)&0x0000FFFF)<<16)	/* Base address mask */
+#define FBCS_CSMR_BAM(x)		(((x) & 0xFFFF) << 16)
+#define FBCS_CSMR_BAM_MASK		(0x0000FFFF)
 #define FBCS_CSMR_BAM_4G		(0xFFFF0000)
 #define FBCS_CSMR_BAM_2G		(0x7FFF0000)
 #define FBCS_CSMR_BAM_1G		(0x3FFF0000)
@@ -78,21 +81,40 @@
 #define FBCS_CSMR_BAM_128K		(0x00010000)
 #define FBCS_CSMR_BAM_64K		(0x00000000)
 
-/* Bit definitions and macros for CSCR group */
-#define FBCS_CSCR_BSTW			(0x00000008)	/* Burst-write enable */
-#define FBCS_CSCR_BSTR			(0x00000010)	/* Burst-read enable */
-#define FBCS_CSCR_BEM			(0x00000020)	/* Byte-enable mode */
-#define FBCS_CSCR_PS(x)			(((x)&0x00000003)<<6)	/* Port size */
-#define FBCS_CSCR_AA			(0x00000100)	/* Auto-acknowledge */
-#define FBCS_CSCR_WS(x)			(((x)&0x0000003F)<<10)	/* Wait states */
-#define FBCS_CSCR_WRAH(x)		(((x)&0x00000003)<<16)	/* Write address hold or deselect */
-#define FBCS_CSCR_RDAH(x)		(((x)&0x00000003)<<18)	/* Read address hold or deselect */
-#define FBCS_CSCR_ASET(x)		(((x)&0x00000003)<<20)	/* Address setup */
-#define FBCS_CSCR_SWSEN			(0x00800000)	/* Secondary wait state enable */
-#define FBCS_CSCR_SWS(x)		(((x)&0x0000003F)<<26)	/* Secondary wait states */
+#ifdef CONFIG_M5249
+#define FBCS_CSMR_WP			(0x00000080)
+#define FBCS_CSMR_AM			(0x00000040)
+#define FBCS_CSMR_CI			(0x00000020)
+#define FBCS_CSMR_SC			(0x00000010)
+#define FBCS_CSMR_SD			(0x00000008)
+#define FBCS_CSMR_UC			(0x00000004)
+#define FBCS_CSMR_UD			(0x00000002)
+#else
+#define FBCS_CSMR_WP			(0x00000100)
+#endif
+#define FBCS_CSMR_V			(0x00000001)	/* Valid bit */
 
-#define FBCS_CSCR_PS_8			(0x00000040)
+#define FBCS_CSCR_SWS(x)		(((x) & 0x3F) << 26)
+#define FBCS_CSCR_SWS_MASK		(0x03FFFFFF)
+#define FBCS_CSCR_SWSEN			(0x00800000)
+#define FBCS_CSCR_ASET(x)		(((x) & 0x03) << 20)
+#define FBCS_CSCR_ASET_MASK		(0xFFCFFFFF)
+#define FBCS_CSCR_RDAH(x)		(((x) & 0x03) << 18)
+#define FBCS_CSCR_RDAH_MASK		(0xFFF3FFFF)
+#define FBCS_CSCR_WRAH(x)		(((x) & 0x03) << 16)
+#define FBCS_CSCR_WRAH_MASK		(0xFFFCFFFF)
+#define FBCS_CSCR_WS(x)			(((x) & 0x3F) << 10)
+#define FBCS_CSCR_WS_MASK		(0xFFFF03FF)
+#define FBCS_CSCR_SBM			(0x00000200)
+#define FBCS_CSCR_AA			(0x00000100)
+#define FBCS_CSCR_PS(x)			(((x) & 0x03) << 6)
+#define FBCS_CSCR_PS_MASK		(0xFFFFFF3F)
+#define FBCS_CSCR_BEM			(0x00000020)
+#define FBCS_CSCR_BSTR			(0x00000010)
+#define FBCS_CSCR_BSTW			(0x00000008)
+
 #define FBCS_CSCR_PS_16			(0x00000080)
+#define FBCS_CSCR_PS_8			(0x00000040)
 #define FBCS_CSCR_PS_32			(0x00000000)
 
 #endif				/* __FLEXBUS_H */
diff --git a/include/asm-m68k/coldfire/flexcan.h b/include/asm-m68k/coldfire/flexcan.h
new file mode 100644
index 0000000..cafd44f
--- /dev/null
+++ b/include/asm-m68k/coldfire/flexcan.h
@@ -0,0 +1,219 @@
+/*
+ * Flex CAN Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __FLEXCAN_H__
+#define __FLEXCAN_H__
+
+/* FlexCan Message Buffer */
+typedef struct can_msgbuf_ctrl {
+#ifdef CONFIG_M5282
+	u8 tmstamp;		/* 0x00 Timestamp */
+	u8 ctrl;		/* 0x01 Control */
+	u16 idh;		/* 0x02 ID High */
+	u16 idl;		/* 0x04 ID High */
+	u8 data[8];		/* 0x06 8 Byte Data Field */
+	u16 res;		/* 0x0E */
+#else
+	u16 ctrl;		/* 0x00 Control/Status */
+	u16 tmstamp;		/* 0x02 Timestamp */
+	u32 id;			/* 0x04 Identifier */
+	u8 data[8];		/* 0x08 8 Byte Data Field */
+#endif
+} can_msg_t;
+
+#ifdef CONFIG_M5282
+/* MSGBUF CTRL */
+#define CAN_MSGBUF_CTRL_CODE(x)		(((x) & 0x0F) << 4)
+#define CAN_MSGBUF_CTRL_CODE_MASK	(0x0F)
+#define CAN_MSGBUF_CTRL_LEN(x)		((x) & 0x0F)
+#define CAN_MSGBUF_CTRL_LEN_MASK	(0xF0)
+
+/* MSGBUF ID */
+#define CAN_MSGBUF_IDH_STD(x)		(((x) & 0x07FF) << 5)
+#define CAN_MSGBUF_IDH_STD_MASK		(0xE003FFFF)
+#define CAN_MSGBUF_IDH_SRR		(0x0010)
+#define CAN_MSGBUF_IDH_IDE		(0x0080)
+#define CAN_MSGBUF_IDH_EXTH(x)		((x) & 0x07)
+#define CAN_MSGBUF_IDH_EXTH_MASK	(0xFFF8)
+#define CAN_MSGBUF_IDL_EXTL(x)		(((x) & 0x7FFF) << 1)
+#define CAN_MSGBUF_IDL_EXTL_MASK		(0xFFFE)
+#define CAN_MSGBUF_IDL_RTR		(0x0001)
+#else
+/* MSGBUF CTRL */
+#define CAN_MSGBUF_CTRL_CODE(x)		(((x) & 0x000F) << 8)
+#define CAN_MSGBUF_CTRL_CODE_MASK	(0xF0FF)
+#define CAN_MSGBUF_CTRL_SRR		(0x0040)
+#define CAN_MSGBUF_CTRL_IDE		(0x0020)
+#define CAN_MSGBUF_CTRL_RTR		(0x0010)
+#define CAN_MSGBUF_CTRL_LEN(x)		((x) & 0x000F)
+#define CAN_MSGBUF_CTRL_LEN_MASK	(0xFFF0)
+
+/* MSGBUF ID */
+#define CAN_MSGBUF_ID_STD(x)		(((x) & 0x000007FF) << 18)
+#define CAN_MSGBUF_ID_STD_MASK		(0xE003FFFF)
+#define CAN_MSGBUF_ID_EXT(x)		((x) & 0x0003FFFF)
+#define CAN_MSGBUF_ID_EXT_MASK		(0xFFFC0000)
+#endif
+
+/* FlexCan module */
+typedef struct can_ctrl {
+	u32 mcr;		/* 0x00 Module Configuration */
+	u32 ctrl;		/* 0x04 Control */
+	u32 timer;		/* 0x08 Free Running Timer */
+	u32 res1;		/* 0x0C */
+	u32 rxgmsk;		/* 0x10 Rx Global Mask */
+	u32 rx14msk;		/* 0x14 RxBuffer 14 Mask */
+	u32 rx15msk;		/* 0x18 RxBuffer 15 Mask */
+#ifdef CONFIG_M5282
+	u32 res2;		/* 0x1C */
+	u16 errstat;		/* 0x20 Error and status */
+	u16 imsk;		/* 0x22 Interrupt Mask */
+	u16 iflag;		/* 0x24 Interrupt Flag */
+	u16 errcnt;		/* 0x26 Error Counter */
+	u32 res3[3];		/* 0x28 - 0x33 */
+#else
+	u16 res2;		/* 0x1C */
+	u16 errcnt;		/* 0x1E Error Counter */
+	u16 res3;		/* 0x20 */
+	u16 errstat;		/* 0x22 Error and status */
+	u32 res4;		/* 0x24 */
+	u32 imsk;		/* 0x28 Interrupt Mask */
+	u32 res5;		/* 0x2C */
+	u16 iflag;		/* 0x30 Interrupt Flag */
+#endif
+	u32 res6[19];		/* 0x34 - 0x7F */
+	void *msgbuf;		/* 0x80 Message Buffer 0-15 */
+} can_t;
+
+/* MCR */
+#define CAN_MCR_MDIS			(0x80000000)
+#define CAN_MCR_FRZ			(0x40000000)
+#define CAN_MCR_HALT			(0x10000000)
+#define CAN_MCR_NORDY			(0x08000000)
+#define CAN_MCF_WAKEMSK			(0x04000000)	/* 5282 */
+#define CAN_MCR_SOFTRST			(0x02000000)
+#define CAN_MCR_FRZACK			(0x01000000)
+#define CAN_MCR_SUPV			(0x00800000)
+#define CAN_MCR_SELFWAKE		(0x00400000)	/* 5282 */
+#define CAN_MCR_APS			(0x00200000)	/* 5282 */
+#define CAN_MCR_LPMACK			(0x00100000)
+#define CAN_MCF_BCC			(0x00010000)
+#define CAN_MCR_MAXMB(x)		((x) & 0x0F)
+#define CAN_MCR_MAXMB_MASK		(0xFFFFFFF0)
+
+/* CTRL */
+#define CAN_CTRL_PRESDIV(x)		(((x) & 0xFF) << 24)
+#define CAN_CTRL_PRESDIV_MASK		(0x00FFFFFF)
+#define CAN_CTRL_RJW(x)			(((x) & 0x03) << 22)
+#define CAN_CTRL_RJW_MASK		(0xFF3FFFFF)
+#define CAN_CTRL_PSEG1(x)		(((x) & 0x07) << 19)
+#define CAN_CTRL_PSEG1_MASK		(0xFFC7FFFF)
+#define CAN_CTRL_PSEG2(x)		(((x) & 0x07) << 16)
+#define CAN_CTRL_PSEG2_MASK		(0xFFF8FFFF)
+#define CAN_CTRL_BOFFMSK		(0x00008000)
+#define CAN_CTRL_ERRMSK			(0x00004000)
+#define CAN_CTRL_CLKSRC			(0x00002000)
+#define CAN_CTRL_LPB			(0x00001000)
+#define CAN_CTRL_RXMODE			(0x00000400)	/* 5282 */
+#define CAN_CTRL_TXMODE(x)		(((x) & 0x03) << 8)	/* 5282 */
+#define CAN_CTRL_TXMODE_MASK		(0xFFFFFCFF)	/* 5282 */
+#define CAN_CTRL_TXMODE_CAN0		(0x00000000)	/* 5282 */
+#define CAN_CTRL_TXMODE_CAN1		(0x00000100)	/* 5282 */
+#define CAN_CTRL_TXMODE_OPEN		(0x00000200)	/* 5282 */
+#define CAN_CTRL_SMP			(0x00000080)
+#define CAN_CTRL_BOFFREC		(0x00000040)
+#define CAN_CTRL_TSYNC			(0x00000020)
+#define CAN_CTRL_LBUF			(0x00000010)
+#define CAN_CTRL_LOM			(0x00000008)
+#define CAN_CTRL_PROPSEG(x)		((x) & 0x07)
+#define CAN_CTRL_PROPSEG_MASK		(0xFFFFFFF8)
+
+/* TIMER */
+/* Note: PRESDIV, RJW, PSG1, and PSG2 are part of timer in 5282 */
+#define CAN_TIMER(x)			((x) & 0xFFFF)
+#define CAN_TIMER_MASK			(0xFFFF0000)
+
+/* RXGMASK */
+#ifdef CONFIG_M5282
+#define CAN_RXGMSK_MI_STD(x)		(((x) & 0x000007FF) << 21)
+#define CAN_RXGMSK_MI_STD_MASK		(0x001FFFFF)
+#define CAN_RXGMSK_MI_EXT(x)		(((x) & 0x0003FFFF) << 1)
+#define CAN_RXGMSK_MI_EXT_MASK		(0xFFF80001)
+#else
+#define CAN_RXGMSK_MI_STD(x)		(((x) & 0x000007FF) << 18)
+#define CAN_RXGMSK_MI_STD_MASK		(0xE003FFFF)
+#define CAN_RXGMSK_MI_EXT(x)		((x) & 0x0003FFFF)
+#define CAN_RXGMSK_MI_EXT_MASK		(0xFFFC0000)
+#endif
+
+/* ERRCNT */
+#define CAN_ERRCNT_RXECTR(x)		(((x) & 0xFF) << 8)
+#define CAN_ERRCNT_RXECTR_MASK		(0x00FF)
+#define CAN_ERRCNT_TXECTR(x)		((x) & 0xFF)
+#define CAN_ERRCNT_TXECTR_MASK		(0xFF00)
+
+/* ERRSTAT */
+#define CAN_ERRSTAT_BITERR1		(0x8000)
+#define CAN_ERRSTAT_BITERR0		(0x4000)
+#define CAN_ERRSTAT_ACKERR		(0x2000)
+#define CAN_ERRSTAT_CRCERR		(0x1000)
+#define CAN_ERRSTAT_FRMERR		(0x0800)
+#define CAN_ERRSTAT_STFERR		(0x0400)
+#define CAN_ERRSTAT_TXWRN		(0x0200)
+#define CAN_ERRSTAT_RXWRN		(0x0100)
+#define CAN_ERRSTAT_IDLE		(0x0080)
+#define CAN_ERRSTAT_TXRX		(0x0040)
+#define CAN_ERRSTAT_FLT_MASK		(0xFFCF)
+#define CAN_ERRSTAT_FLT_BUSOFF		(0x0020)
+#define CAN_ERRSTAT_FLT_PASSIVE		(0x0010)
+#define CAN_ERRSTAT_FLT_ACTIVE		(0x0000)
+#ifdef CONFIG_M5282
+#define CAN_ERRSTAT_BOFFINT		(0x0004)
+#define CAN_ERRSTAT_ERRINT		(0x0002)
+#else
+#define CAN_ERRSTAT_ERRINT		(0x0004)
+#define CAN_ERRSTAT_BOFFINT		(0x0002)
+#define CAN_ERRSTAT_WAKEINT		(0x0001)
+#endif
+
+/* IMASK */
+#ifdef CONFIG_M5253
+#define CAN_IMASK_BUFnM(x)		(1 << (x & 0xFFFFFFFF))
+#define CAN_IMASK_BUFnM_MASKBIT(x)	~CAN_IMASK_BUFnM(x)
+#else
+#define CAN_IMASK_BUFnM(x)		(1 << (x & 0xFFFF))
+#define CAN_IMASK_BUFnM_MASKBIT(x)	~CAN_IMASK_BUFnM(x)
+#endif
+
+/* IFLAG */
+#ifdef CONFIG_M5253
+#define CAN_IFLAG_BUFnM(x)		(1 << (x & 0xFFFFFFFF))
+#define CAN_IFLAG_BUFnM_MASKBIT(x)	~CAN_IFLAG_BUFnM(x)
+#else
+#define CAN_IFLAG_BUFnM(x)		(1 << (x & 0xFFFF))
+#define CAN_IFLAG_BUFnM_MASKBIT(x)	~CAN_IFLAG_BUFnM(x)
+#endif
+
+#endif				/* __FLEXCAN_H__ */
diff --git a/include/asm-m68k/coldfire/intctrl.h b/include/asm-m68k/coldfire/intctrl.h
new file mode 100644
index 0000000..ae82b29
--- /dev/null
+++ b/include/asm-m68k/coldfire/intctrl.h
@@ -0,0 +1,246 @@
+/*
+ * Interrupt Controller Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __INTCTRL_H__
+#define __INTCTRL_H__
+
+#if defined(CONFIG_M5235) || defined(CONFIG_M5271) || \
+    defined(CONFIG_M5275) || defined(CONFIG_M5282) || \
+    defined(CONFIG_M547x) || defined(CONFIG_M548x)
+#	define	CONFIG_SYS_CF_INTC_REG1
+#endif
+
+typedef struct int0_ctrl {
+	/* Interrupt Controller 0 */
+	u32 iprh0;		/* 0x00 Pending High */
+	u32 iprl0;		/* 0x04 Pending Low */
+	u32 imrh0;		/* 0x08 Mask High */
+	u32 imrl0;		/* 0x0C Mask Low */
+	u32 frch0;		/* 0x10 Force High */
+	u32 frcl0;		/* 0x14 Force Low */
+#if defined(CONFIG_SYS_CF_INTC_REG1)
+	u8 irlr;		/* 0x18 */
+	u8 iacklpr;		/* 0x19 */
+	u16 res1[19];		/* 0x1a - 0x3c */
+#else
+	u16 res1;		/* 0x18 - 0x19 */
+	u16 icfg0;		/* 0x1A Configuration */
+	u8 simr0;		/* 0x1C Set Interrupt Mask */
+	u8 cimr0;		/* 0x1D Clear Interrupt Mask */
+	u8 clmask0;		/* 0x1E Current Level Mask */
+	u8 slmask;		/* 0x1F Saved Level Mask */
+	u32 res2[8];		/* 0x20 - 0x3F */
+#endif
+	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
+	u32 res3[24];		/* 0x80 - 0xDF */
+	u8 swiack0;		/* 0xE0 Software Interrupt ack */
+	u8 res4[3];		/* 0xE1 - 0xE3 */
+	u8 L1iack0;		/* 0xE4 Level n interrupt ack */
+	u8 res5[3];		/* 0xE5 - 0xE7 */
+	u8 L2iack0;		/* 0xE8 Level n interrupt ack */
+	u8 res6[3];		/* 0xE9 - 0xEB */
+	u8 L3iack0;		/* 0xEC Level n interrupt ack */
+	u8 res7[3];		/* 0xED - 0xEF */
+	u8 L4iack0;		/* 0xF0 Level n interrupt ack */
+	u8 res8[3];		/* 0xF1 - 0xF3 */
+	u8 L5iack0;		/* 0xF4 Level n interrupt ack */
+	u8 res9[3];		/* 0xF5 - 0xF7 */
+	u8 L6iack0;		/* 0xF8 Level n interrupt ack */
+	u8 resa[3];		/* 0xF9 - 0xFB */
+	u8 L7iack0;		/* 0xFC Level n interrupt ack */
+	u8 resb[3];		/* 0xFD - 0xFF */
+} int0_t;
+
+typedef struct int1_ctrl {
+	/* Interrupt Controller 1 */
+	u32 iprh1;		/* 0x00 Pending High */
+	u32 iprl1;		/* 0x04 Pending Low */
+	u32 imrh1;		/* 0x08 Mask High */
+	u32 imrl1;		/* 0x0C Mask Low */
+	u32 frch1;		/* 0x10 Force High */
+	u32 frcl1;		/* 0x14 Force Low */
+#if defined(CONFIG_SYS_CF_INTC_REG1)
+	u8 irlr;		/* 0x18 */
+	u8 iacklpr;		/* 0x19 */
+	u16 res1[19];		/* 0x1a - 0x3c */
+#else
+	u16 res1;		/* 0x18 */
+	u16 icfg1;		/* 0x1A Configuration */
+	u8 simr1;		/* 0x1C Set Interrupt Mask */
+	u8 cimr1;		/* 0x1D Clear Interrupt Mask */
+	u16 res2;		/* 0x1E - 0x1F */
+	u32 res3[8];		/* 0x20 - 0x3F */
+#endif
+	u8 icr1[64];		/* 0x40 - 0x7F */
+	u32 res4[24];		/* 0x80 - 0xDF */
+	u8 swiack1;		/* 0xE0 Software Interrupt ack */
+	u8 res5[3];		/* 0xE1 - 0xE3 */
+	u8 L1iack1;		/* 0xE4 Level n interrupt ack */
+	u8 res6[3];		/* 0xE5 - 0xE7 */
+	u8 L2iack1;		/* 0xE8 Level n interrupt ack */
+	u8 res7[3];		/* 0xE9 - 0xEB */
+	u8 L3iack1;		/* 0xEC Level n interrupt ack */
+	u8 res8[3];		/* 0xED - 0xEF */
+	u8 L4iack1;		/* 0xF0 Level n interrupt ack */
+	u8 res9[3];		/* 0xF1 - 0xF3 */
+	u8 L5iack1;		/* 0xF4 Level n interrupt ack */
+	u8 resa[3];		/* 0xF5 - 0xF7 */
+	u8 L6iack1;		/* 0xF8 Level n interrupt ack */
+	u8 resb[3];		/* 0xF9 - 0xFB */
+	u8 L7iack1;		/* 0xFC Level n interrupt ack */
+	u8 resc[3];		/* 0xFD - 0xFF */
+} int1_t;
+
+typedef struct intgack_ctrl1 {
+	/* Global IACK Registers */
+	u8 swiack;		/* 0x00 Global Software Interrupt ack */
+	u8 res0[0x3];
+	u8 gl1iack;		/* 0x04 */
+	u8 resv1[0x3];
+	u8 gl2iack;		/* 0x08 */
+	u8 res2[0x3];
+	u8 gl3iack;		/* 0x0C */
+	u8 res3[0x3];
+	u8 gl4iack;		/* 0x10 */
+	u8 res4[0x3];
+	u8 gl5iack;		/* 0x14 */
+	u8 res5[0x3];
+	u8 gl6iack;		/* 0x18 */
+	u8 res6[0x3];
+	u8 gl7iack;		/* 0x1C */
+	u8 res7[0x3];
+} intgack_t;
+
+#define INTC_IPRH_INT63			(0x80000000)
+#define INTC_IPRH_INT62			(0x40000000)
+#define INTC_IPRH_INT61			(0x20000000)
+#define INTC_IPRH_INT60			(0x10000000)
+#define INTC_IPRH_INT59			(0x08000000)
+#define INTC_IPRH_INT58			(0x04000000)
+#define INTC_IPRH_INT57			(0x02000000)
+#define INTC_IPRH_INT56			(0x01000000)
+#define INTC_IPRH_INT55			(0x00800000)
+#define INTC_IPRH_INT54			(0x00400000)
+#define INTC_IPRH_INT53			(0x00200000)
+#define INTC_IPRH_INT52			(0x00100000)
+#define INTC_IPRH_INT51			(0x00080000)
+#define INTC_IPRH_INT50			(0x00040000)
+#define INTC_IPRH_INT49			(0x00020000)
+#define INTC_IPRH_INT48			(0x00010000)
+#define INTC_IPRH_INT47			(0x00008000)
+#define INTC_IPRH_INT46			(0x00004000)
+#define INTC_IPRH_INT45			(0x00002000)
+#define INTC_IPRH_INT44			(0x00001000)
+#define INTC_IPRH_INT43			(0x00000800)
+#define INTC_IPRH_INT42			(0x00000400)
+#define INTC_IPRH_INT41			(0x00000200)
+#define INTC_IPRH_INT40			(0x00000100)
+#define INTC_IPRH_INT39			(0x00000080)
+#define INTC_IPRH_INT38			(0x00000040)
+#define INTC_IPRH_INT37			(0x00000020)
+#define INTC_IPRH_INT36			(0x00000010)
+#define INTC_IPRH_INT35			(0x00000008)
+#define INTC_IPRH_INT34			(0x00000004)
+#define INTC_IPRH_INT33			(0x00000002)
+#define INTC_IPRH_INT32			(0x00000001)
+
+#define INTC_IPRL_INT31			(0x80000000)
+#define INTC_IPRL_INT30			(0x40000000)
+#define INTC_IPRL_INT29			(0x20000000)
+#define INTC_IPRL_INT28			(0x10000000)
+#define INTC_IPRL_INT27			(0x08000000)
+#define INTC_IPRL_INT26			(0x04000000)
+#define INTC_IPRL_INT25			(0x02000000)
+#define INTC_IPRL_INT24			(0x01000000)
+#define INTC_IPRL_INT23			(0x00800000)
+#define INTC_IPRL_INT22			(0x00400000)
+#define INTC_IPRL_INT21			(0x00200000)
+#define INTC_IPRL_INT20			(0x00100000)
+#define INTC_IPRL_INT19			(0x00080000)
+#define INTC_IPRL_INT18			(0x00040000)
+#define INTC_IPRL_INT17			(0x00020000)
+#define INTC_IPRL_INT16			(0x00010000)
+#define INTC_IPRL_INT15			(0x00008000)
+#define INTC_IPRL_INT14			(0x00004000)
+#define INTC_IPRL_INT13			(0x00002000)
+#define INTC_IPRL_INT12			(0x00001000)
+#define INTC_IPRL_INT11			(0x00000800)
+#define INTC_IPRL_INT10			(0x00000400)
+#define INTC_IPRL_INT9			(0x00000200)
+#define INTC_IPRL_INT8			(0x00000100)
+#define INTC_IPRL_INT7			(0x00000080)
+#define INTC_IPRL_INT6			(0x00000040)
+#define INTC_IPRL_INT5			(0x00000020)
+#define INTC_IPRL_INT4			(0x00000010)
+#define INTC_IPRL_INT3			(0x00000008)
+#define INTC_IPRL_INT2			(0x00000004)
+#define INTC_IPRL_INT1			(0x00000002)
+#define INTC_IPRL_INT0			(0x00000001)
+
+#define INTC_IMRLn_MASKALL		(0x00000001)
+
+#define INTC_IRLR(x)			(((x) & 0x7F) << 1)
+#define INTC_IRLR_MASK			(0x01)
+
+#define INTC_IACKLPR_LVL(x)		(((x) & 0x07) << 4)
+#define INTC_IACKLPR_LVL_MASK		(0x8F)
+#define INTC_IACKLPR_PRI(x)		((x) & 0x0F)
+#define INTC_IACKLPR_PRI_MASK		(0xF0)
+
+#if defined(CONFIG_SYS_CF_INTC_REG1)
+#define INTC_ICR_IL(x)			(((x) & 0x07) << 3)
+#define INTC_ICR_IL_MASK		(0xC7)
+#define INTC_ICR_IP(x)			((x) & 0x07)
+#define INTC_ICR_IP_MASK		(0xF8)
+#else
+#define INTC_ICR_IL(x)			((x) & 0x07)
+#define INTC_ICR_IL_MASK		(0xF8)
+#endif
+
+#define INTC_ICONFIG_ELVLPRI_MASK	(0x01FF)
+#define INTC_ICONFIG_ELVLPRI7		(0x8000)
+#define INTC_ICONFIG_ELVLPRI6		(0x4000)
+#define INTC_ICONFIG_ELVLPRI5		(0x2000)
+#define INTC_ICONFIG_ELVLPRI4		(0x1000)
+#define INTC_ICONFIG_ELVLPRI3		(0x0800)
+#define INTC_ICONFIG_ELVLPRI2		(0x0400)
+#define INTC_ICONFIG_ELVLPRI1		(0x0200)
+#define INTC_ICONFIG_EMASK		(0x0020)
+
+#define INTC_SIMR_ALL			(0x40)
+#define INTC_SIMR(x)			((x) & 0x3F)
+#define INTC_SIMR_MASK			(0x80)
+
+#define INTC_CIMR_ALL			(0x40)
+#define INTC_CIMR(x)			((x) & 0x3F)
+#define INTC_CIMR_MASK			(0x80)
+
+#define INTC_CLMASK(x)			((x) & 0x0F)
+#define INTC_CLMASK_MASK		(0xF0)
+
+#define INTC_SLMASK(x)			((x) & 0x0F)
+#define INTC_SLMASK_MASK		(0xF0)
+
+#endif				/* __INTCTRL_H__ */
diff --git a/include/asm-m68k/coldfire/mdha.h b/include/asm-m68k/coldfire/mdha.h
new file mode 100644
index 0000000..b6981363
--- /dev/null
+++ b/include/asm-m68k/coldfire/mdha.h
@@ -0,0 +1,102 @@
+/*
+ * Message Digest Hardware Accelerator Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __MDHA_H__
+#define __MDHA_H__
+
+/* Message Digest Hardware Accelerator */
+typedef struct mdha_ctrl {
+	u32 mr;			/* 0x00 MDHA Mode */
+	u32 cr;			/* 0x04 Control */
+	u32 cmd;		/* 0x08 Command */
+	u32 sr;			/* 0x0C Status */
+	u32 isr;		/* 0x10 Interrupt Status */
+	u32 imr;		/* 0x14 Interrupt Mask */
+	u32 dsz;		/* 0x1C Data Size */
+	u32 inp;		/* 0x20 Input FIFO */
+	u32 res1[3];		/* 0x24 - 0x2F */
+	u32 mda0;		/* 0x30 Message Digest AO */
+	u32 mdb0;		/* 0x34 Message Digest BO */
+	u32 mdc0;		/* 0x38 Message Digest CO */
+	u32 mdd0;		/* 0x3C Message Digest DO */
+	u32 mde0;		/* 0x40 Message Digest EO */
+	u32 mdsz;		/* 0x44 Message Data Size */
+	u32 res[10];		/* 0x48 - 0x6F */
+	u32 mda1;		/* 0x70 Message Digest A1 */
+	u32 mdb1;		/* 0x74 Message Digest B1 */
+	u32 mdc1;		/* 0x78 Message Digest C1 */
+	u32 mdd1;		/* 0x7C Message Digest D1 */
+	u32 mde1;		/* 0x80 Message Digest E1 */
+} mdha_t;
+
+#define MDHA_MR_SSL		(0x00000400)
+#define MDHA_MR_MACFUL		(0x00000200)
+#define MDHA_MR_SWAP		(0x00000100)
+#define MDHA_MR_OPAD		(0x00000080)
+#define MDHA_MR_IPAD		(0x00000040)
+#define MDHA_MR_INIT		(0x00000020)
+#define MDHA_MR_MAC(x)		(((x) & 0x03) << 3)
+#define MDHA_MR_MAC_MASK	(0xFFFFFFE7)
+#define MDHA_MR_MAC_EHMAC	(0x00000010)
+#define MDHA_MR_MAC_HMAC	(0x00000008)
+#define MDHA_MR_MAC_NONE	(0x00000000)
+#define MDHA_MR_PDATA		(0x00000004)
+#define MDHA_MR_ALG		(0x00000001)
+
+#define MDHA_CR_DMAL(x)		(((x) & 0x1F) << 16)	/* 532x */
+#define MDHA_CR_DMAL_MASK	(0xFFE0FFFF)		/* 532x */
+#define MDHA_CR_END		(0x00000004)		/* 532x */
+#define MDHA_CR_DMA		(0x00000002)		/* 532x */
+#define MDHA_CR_IE		(0x00000001)
+
+#define MDHA_CMD_GO		(0x00000008)
+#define MDHA_CMD_CI		(0x00000004)
+#define MDHA_CMD_RI		(0x00000001)
+#define MDHA_CMD_SWR		(0x00000001)
+
+#define MDHA_SR_IFL(x)		(((x) & 0xFF) << 16)
+#define MDHA_SR_IFL_MASK	(0xFF00FFFF)
+#define MDHA_SR_APD(x)		(((x) & 0x7) << 13)
+#define MDHA_SR_APD_MASK	(0xFFFF1FFF)
+#define MDHA_SR_FS(x)		(((x) & 0x7) << 8)
+#define MDHA_SR_FS_MASK		(0xFFFFF8FF)
+#define MDHA_SR_GNW		(0x00000080)
+#define MDHA_SR_HSH		(0x00000040)
+#define MDHA_SR_BUSY		(0x00000010)
+#define MDHA_SR_RD		(0x00000008)
+#define MDHA_SR_ERR		(0x00000004)
+#define MDHA_SR_DONE		(0x00000002)
+#define MDHA_SR_INT		(0x00000001)
+
+#define MDHA_ISR_DRL		(0x00000400)		/* 532x */
+#define MDHA_ISR_GTDS		(0x00000200)
+#define MDHA_ISR_ERE		(0x00000100)
+#define MDHA_ISR_RMDP		(0x00000080)
+#define MDHA_ISR_DSE		(0x00000020)
+#define MDHA_ISR_IME		(0x00000010)
+#define MDHA_ISR_NEIF		(0x00000004)
+#define MDHA_ISR_IFO		(0x00000001)
+
+#endif				/* __MDHA_H__ */
diff --git a/include/asm-m68k/coldfire/pwm.h b/include/asm-m68k/coldfire/pwm.h
new file mode 100644
index 0000000..f737d98
--- /dev/null
+++ b/include/asm-m68k/coldfire/pwm.h
@@ -0,0 +1,115 @@
+/*
+ * Pulse Width Modulation Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ATA_H__
+#define __ATA_H__
+
+/* Pulse Width Modulation (PWM) */
+typedef struct pwm_ctrl {
+#ifdef CONFIG_M5272
+	u8 cr0;
+	u8 res1[3];
+	u8 cr1;
+	u8 res2[3];
+	u8 cr2;
+	u8 res3[7];
+	u8 pwr0;
+	u8 res4[3];
+	u8 pwr1;
+	u8 res5[3];
+	u8 pwr2;
+	u8 res6[7];
+#else
+	u8 en;			/* 0x00 PWM Enable */
+	u8 pol;			/* 0x01 Polarity */
+	u8 clk;			/* 0x02 Clock Select */
+	u8 prclk;		/* 0x03 Prescale Clock Select */
+	u8 cae;			/* 0x04 Center Align Enable */
+	u8 ctl;			/* 0x05 Control */
+	u16 res1;		/* 0x06 - 0x07 */
+	u8 scla;		/* 0x08 Scale A */
+	u8 sclb;		/* 0x09 Scale B */
+	u16 res2;		/* 0x0A - 0x0B */
+#ifdef CONFIG_M5275
+	u8 cnt[4];		/* 0x0C Channel n Counter */
+	u16 res3;		/* 0x10 - 0x11 */
+	u8 per[4];		/* 0x14 Channel n Period */
+	u16 res4;		/* 0x16 - 0x17 */
+	u8 dty[4];		/* 0x18 Channel n Duty */
+#else
+	u8 cnt[8];		/* 0x0C Channel n Counter */
+	u8 per[8];		/* 0x14 Channel n Period */
+	u8 dty[8];		/* 0x1C Channel n Duty */
+	u8 sdn;			/* 0x24 Shutdown */
+	u8 res3[3];		/* 0x25 - 0x27 */
+#endif				/* CONFIG_M5275 */
+#endif				/* CONFIG_M5272 */
+} pwm_t;
+
+#ifdef CONFIG_M5272
+
+#define PWM_CR_EN			(0x80)
+#define PWM_CR_FRC1			(0x40)
+#define PWM_CR_LVL			(0x20)
+#define PWM_CR_CLKSEL(x)		((x) & 0x0F)
+#define PWM_CR_CLKSEL_MASK		(0xF0)
+
+#else
+
+#define PWM_EN_PWMEn(x)			(1 << ((x) & 0x07))
+#define PWM_EN_PWMEn_MASK		(0xF0)
+
+#define PWM_POL_PPOLn(x)		(1 << ((x) & 0x07))
+#define PWM_POL_PPOLn_MASK		(0xF0)
+
+#define PWM_CLK_PCLKn(x)		(1 << ((x) & 0x07))
+#define PWM_CLK_PCLKn_MASK		(0xF0)
+
+#define PWM_PRCLK_PCKB(x)		(((x) & 0x07) << 4)
+#define PWM_PRCLK_PCKB_MASK		(0x8F)
+#define PWM_PRCLK_PCKA(x)		((x) & 0x07)
+#define PWM_PRCLK_PCKA_MASK		(0xF8)
+
+#define PWM_CLK_PCLKn(x)		(1 << ((x) & 0x07))
+#define PWM_CLK_PCLKn_MASK		(0xF0)
+
+#define PWM_CTL_CON67			(0x80)
+#define PWM_CTL_CON45			(0x40)
+#define PWM_CTL_CON23			(0x20)
+#define PWM_CTL_CON01			(0x10)
+#define PWM_CTL_PSWAR			(0x08)
+#define PWM_CTL_PFRZ			(0x04)
+
+#define PWM_SDN_IF			(0x80)
+#define PWM_SDN_IE			(0x40)
+#define PWM_SDN_RESTART			(0x20)
+#define PWM_SDN_LVL			(0x10)
+#define PWM_SDN_PWM7IN			(0x04)
+#define PWM_SDN_PWM7IL			(0x02)
+#define PWM_SDN_SDNEN			(0x01)
+
+#endif				/* CONFIG_M5272 */
+
+#endif				/* __ATA_H__ */
diff --git a/include/asm-m68k/coldfire/qspi.h b/include/asm-m68k/coldfire/qspi.h
new file mode 100644
index 0000000..8bcd2e4
--- /dev/null
+++ b/include/asm-m68k/coldfire/qspi.h
@@ -0,0 +1,111 @@
+/*
+ * Queue Serial Peripheral Interface Memory Map
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __QSPI_H__
+#define __QSPI_H__
+
+/* QSPI module registers */
+typedef struct qspi_ctrl {
+	u16 mr;			/* 0x00 Mode */
+	u16 res1;
+	u16 dlyr;		/* 0x04 Delay */
+	u16 res2;
+	u16 wr;			/* 0x08 Wrap */
+	u16 res3;
+	u16 ir;			/* 0x0C Interrupt */
+	u16 res4;
+	u16 ar;			/* 0x10 Address */
+	u16 res5;
+	u16 dr;			/* 0x14 Data */
+	u16 res6;
+} qspi_t;
+
+/* MR */
+#define QSPI_QMR_MSTR			(0x8000)
+#define QSPI_QMR_DOHIE			(0x4000)
+#define QSPI_QMR_BITS(x)		(((x)&0x000F)<<10)
+#define QSPI_QMR_BITS_MASK		(0xC3FF)
+#define QSPI_QMR_BITS_8			(0x2000)
+#define QSPI_QMR_BITS_9			(0x2400)
+#define QSPI_QMR_BITS_10		(0x2800)
+#define QSPI_QMR_BITS_11		(0x2C00)
+#define QSPI_QMR_BITS_12		(0x3000)
+#define QSPI_QMR_BITS_13		(0x3400)
+#define QSPI_QMR_BITS_14		(0x3800)
+#define QSPI_QMR_BITS_15		(0x3C00)
+#define QSPI_QMR_BITS_16		(0x0000)
+#define QSPI_QMR_CPOL			(0x0200)
+#define QSPI_QMR_CPHA			(0x0100)
+#define QSPI_QMR_BAUD(x)		((x)&0x00FF)
+#define QSPI_QMR_BAUD_MASK		(0xFF00)
+
+/* DLYR */
+#define QSPI_QDLYR_SPE			(0x8000)
+#define QSPI_QDLYR_QCD(x)		(((x)&0x007F)<<8)
+#define QSPI_QDLYR_QCD_MASK		(0x80FF)
+#define QSPI_QDLYR_DTL(x)		((x)&0x00FF)
+#define QSPI_QDLYR_DTL_MASK		(0xFF00)
+
+/* WR */
+#define QSPI_QWR_HALT			(0x8000)
+#define QSPI_QWR_WREN			(0x4000)
+#define QSPI_QWR_WRTO			(0x2000)
+#define QSPI_QWR_CSIV			(0x1000)
+#define QSPI_QWR_ENDQP(x)		(((x)&0x000F)<<8)
+#define QSPI_QWR_ENDQP_MASK		(0xF0FF)
+#define QSPI_QWR_CPTQP(x)		(((x)&0x000F)<<4)
+#define QSPI_QWR_CPTQP_MASK		(0xFF0F)
+#define QSPI_QWR_NEWQP(x)		((x)&0x000F)
+#define QSPI_QWR_NEWQP_MASK		(0xFFF0)
+
+/* IR */
+#define QSPI_QIR_WCEFB			(0x8000)
+#define QSPI_QIR_ABRTB			(0x4000)
+#define QSPI_QIR_ABRTL			(0x1000)
+#define QSPI_QIR_WCEFE			(0x0800)
+#define QSPI_QIR_ABRTE			(0x0400)
+#define QSPI_QIR_SPIFE			(0x0100)
+#define QSPI_QIR_WCEF			(0x0008)
+#define QSPI_QIR_ABRT			(0x0004)
+#define QSPI_QIR_SPIF			(0x0001)
+
+/* AR */
+#define QSPI_QAR_ADDR(x)		((x)&0x003F)
+#define QSPI_QAR_ADDR_MASK		(0xFFC0)
+#define QSPI_QAR_TRANS			(0x0000)
+#define QSPI_QAR_RECV			(0x0010)
+#define QSPI_QAR_CMD			(0x0020)
+
+/* DR */
+#define QSPI_QDR_CONT			(0x8000)
+#define QSPI_QDR_BITSE			(0x4000)
+#define QSPI_QDR_DT			(0x2000)
+#define QSPI_QDR_DSCK			(0x1000)
+#define QSPI_QDR_QSPI_CS3		(0x0800)
+#define QSPI_QDR_QSPI_CS2		(0x0400)
+#define QSPI_QDR_QSPI_CS1		(0x0200)
+#define QSPI_QDR_QSPI_CS0		(0x0100)
+
+#endif				/* __QSPI_H__ */
diff --git a/include/asm-m68k/coldfire/rng.h b/include/asm-m68k/coldfire/rng.h
new file mode 100644
index 0000000..1eefc56
--- /dev/null
+++ b/include/asm-m68k/coldfire/rng.h
@@ -0,0 +1,52 @@
+/*
+ * RNG Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __RNG_H__
+#define __RNG_H__
+
+/* Random Number Generator */
+typedef struct rng_ctrl {
+	u32 cr;			/* 0x00 Control */
+	u32 sr;			/* 0x04 Status */
+	u32 er;			/* 0x08 Entropy */
+	u32 out;		/* 0x0C Output FIFO */
+} rng_t;
+
+#define RNG_CR_SLM		(0x00000010)	/* Sleep mode - 5445x */
+#define RNG_CR_CI		(0x00000008)	/* Clear interrupt */
+#define RNG_CR_IM		(0x00000004)	/* Interrupt mask */
+#define RNG_CR_HA		(0x00000002)	/* High assurance */
+#define RNG_CR_GO		(0x00000001)	/* Go bit */
+
+#define RNG_SR_OFS(x)		(((x) & 0x000000FF) << 16)
+#define RNG_SR_OFS_MASK		(0xFF00FFFF)
+#define RNG_SR_OFL(x)		(((x) & 0x000000FF) << 8)
+#define RNG_SR_OFL_MASK		(0xFFFF00FF)
+#define RNG_SR_EI		(0x00000008)
+#define RNG_SR_FUF		(0x00000004)
+#define RNG_SR_LRS		(0x00000002)
+#define RNG_SR_SV		(0x00000001)
+
+#endif				/* __RNG_H__ */
diff --git a/include/asm-m68k/coldfire/skha.h b/include/asm-m68k/coldfire/skha.h
new file mode 100644
index 0000000..bd6b5af
--- /dev/null
+++ b/include/asm-m68k/coldfire/skha.h
@@ -0,0 +1,121 @@
+/*
+ * Symmetric Key Hardware Accelerator Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __SKHA_H__
+#define __SKHA_H__
+
+typedef struct skha_ctrl {
+	u32 mr;			/* 0x00 Mode */
+	u32 cr;			/* 0x04 Control */
+	u32 cmr;		/* 0x08 Command */
+	u32 sr;			/* 0x0C Status */
+	u32 esr;		/* 0x10 Error Status */
+	u32 emr;		/* 0x14 Error Status Mask Register) */
+	u32 ksr;		/* 0x18 Key Size */
+	u32 dsr;		/* 0x1C Data Size */
+	u32 in;			/* 0x20 Input FIFO */
+	u32 out;		/* 0x24 Output FIFO */
+	u32 res1[2];		/* 0x28 - 0x2F */
+	u32 kdr1;		/* 0x30 Key Data 1  */
+	u32 kdr2;		/* 0x34 Key Data 2 */
+	u32 kdr3;		/* 0x38 Key Data 3 */
+	u32 kdr4;		/* 0x3C Key Data 4 */
+	u32 kdr5;		/* 0x40 Key Data 5 */
+	u32 kdr6;		/* 0x44 Key Data 6 */
+	u32 res2[10];		/* 0x48 - 0x6F */
+	u32 c1;			/* 0x70 Context 1 */
+	u32 c2;			/* 0x74 Context 2 */
+	u32 c3;			/* 0x78 Context 3 */
+	u32 c4;			/* 0x7C Context 4 */
+	u32 c5;			/* 0x80 Context 5 */
+	u32 c6;			/* 0x84 Context 6 */
+	u32 c7;			/* 0x88 Context 7 */
+	u32 c8;			/* 0x8C Context 8 */
+	u32 c9;			/* 0x90 Context 9 */
+	u32 c10;		/* 0x94 Context 10 */
+	u32 c11;		/* 0x98 Context 11 */
+	u32 c12;		/* 0x9C Context 12 - 5235, 5271, 5272 */
+} skha_t;
+
+#ifdef CONFIG_MCF532x
+#define	SKHA_MODE_CTRM(x)	(((x) & 0x0F) << 9)
+#define	SKHA_MODE_CTRM_MASK	(0xFFFFE1FF)
+#define	SKHA_MODE_DKP		(0x00000100)
+#else
+#define	SKHA_MODE_CTRM(x)	(((x) & 0x0F) << 8)
+#define	SKHA_MODE_CTRM_MASK	(0xFFFFF0FF)
+#define	SKHA_MODE_DKP		(0x00000080)
+#endif
+#define	SKHA_MODE_CM(x)		(((x) & 0x03) << 3)
+#define	SKHA_MODE_CM_MASK	(0xFFFFFFE7)
+#define	SKHA_MODE_DIR		(0x00000004)
+#define	SKHA_MODE_ALG(x)	((x) & 0x03)
+#define	SKHA_MODE_ALG_MASK	(0xFFFFFFFC)
+
+#define SHKA_CR_ODMAL(x)	(((x) & 0x3F) << 24)
+#define SHKA_CR_ODMAL_MASK	(0xC0FFFFFF)
+#define SHKA_CR_IDMAL(x)	(((x) & 0x3F) << 16)
+#define SHKA_CR_IDMAL_MASK	(0xFFC0FFFF)
+#define SHKA_CR_END		(0x00000008)
+#define SHKA_CR_ODMA		(0x00000004)
+#define SHKA_CR_IDMA		(0x00000002)
+#define	SKHA_CR_IE		(0x00000001)
+
+#define	SKHA_CMR_GO		(0x00000008)
+#define	SKHA_CMR_CI		(0x00000004)
+#define	SKHA_CMR_RI		(0x00000002)
+#define	SKHA_CMR_SWR		(0x00000001)
+
+#define SKHA_SR_OFL(x)		(((x) & 0xFF) << 24)
+#define SKHA_SR_OFL_MASK	(0x00FFFFFF)
+#define SKHA_SR_IFL(x)		(((x) & 0xFF) << 16)
+#define SKHA_SR_IFL_MASK	(0xFF00FFFF)
+#define SKHA_SR_AESES(x)	(((x) & 0x1F) << 11)
+#define SKHA_SR_AESES_MASK	(0xFFFF07FF)
+#define SKHA_SR_DESES(x)	(((x) & 0x7) << 8)
+#define SKHA_SR_DESES_MASK	(0xFFFFF8FF)
+#define SKHA_SR_BUSY		(0x00000010)
+#define SKHA_SR_RD		(0x00000008)
+#define SKHA_SR_ERR		(0x00000004)
+#define SKHA_SR_DONE		(0x00000002)
+#define SKHA_SR_INT		(0x00000001)
+
+#define SHKA_ESE_DRL		(0x00000800)
+#define	SKHA_ESR_KRE		(0x00000400)
+#define	SKHA_ESR_KPE		(0x00000200)
+#define	SKHA_ESR_ERE		(0x00000100)
+#define	SKHA_ESR_RMDP		(0x00000080)
+#define	SKHA_ESR_KSE		(0x00000040)
+#define	SKHA_ESR_DSE		(0x00000020)
+#define	SKHA_ESR_IME		(0x00000010)
+#define	SKHA_ESR_NEOF		(0x00000008)
+#define	SKHA_ESR_NEIF		(0x00000004)
+#define	SKHA_ESR_OFU		(0x00000002)
+#define	SKHA_ESR_IFO		(0x00000001)
+
+#define	SKHA_KSR_SZ(x)		((x) & 0x3F)
+#define	SKHA_KSR_SZ_MASK	(0xFFFFFFC0)
+
+#endif				/* __SKHA_H__ */
diff --git a/include/asm-m68k/coldfire/ssi.h b/include/asm-m68k/coldfire/ssi.h
index 105c475..b3dfbfa 100644
--- a/include/asm-m68k/coldfire/ssi.h
+++ b/include/asm-m68k/coldfire/ssi.h
@@ -26,10 +26,6 @@
 #ifndef __SSI_H__
 #define __SSI_H__
 
-/*********************************************************************
-* Synchronous Serial Interface (SSI)
-*********************************************************************/
-
 typedef struct ssi {
 	u32 tx0;
 	u32 tx1;
@@ -52,14 +48,10 @@
 	u32 rmask;
 } ssi_t;
 
-/*********************************************************************
-* Synchronous Serial Interface (SSI)
-*********************************************************************/
-
-/* Bit definitions and macros for SSI_CR */
 #define SSI_CR_CIS			(0x00000200)
 #define SSI_CR_TCH			(0x00000100)
 #define SSI_CR_MCE			(0x00000080)
+#define SSI_CR_I2S_MASK			(0xFFFFFF9F)
 #define SSI_CR_I2S_SLAVE		(0x00000040)
 #define SSI_CR_I2S_MASTER		(0x00000020)
 #define SSI_CR_I2S_NORMAL		(0x00000000)
@@ -69,7 +61,6 @@
 #define SSI_CR_TE			(0x00000002)
 #define SSI_CR_SSI_EN			(0x00000001)
 
-/* Bit definitions and macros for SSI_ISR */
 #define SSI_ISR_CMDAU			(0x00040000)
 #define SSI_ISR_CMDDU			(0x00020000)
 #define SSI_ISR_RXT			(0x00010000)
@@ -90,7 +81,6 @@
 #define SSI_ISR_TFE1			(0x00000002)
 #define SSI_ISR_TFE0			(0x00000001)
 
-/* Bit definitions and macros for SSI_IER */
 #define SSI_IER_RDMAE			(0x00400000)
 #define SSI_IER_RIE			(0x00200000)
 #define SSI_IER_TDMAE			(0x00100000)
@@ -115,7 +105,6 @@
 #define SSI_IER_TFE1			(0x00000002)
 #define SSI_IER_TFE0			(0x00000001)
 
-/* Bit definitions and macros for SSI_TCR */
 #define SSI_TCR_TXBIT0			(0x00000200)
 #define SSI_TCR_TFEN1			(0x00000100)
 #define SSI_TCR_TFEN0			(0x00000080)
@@ -127,7 +116,6 @@
 #define SSI_TCR_TFSL			(0x00000002)
 #define SSI_TCR_TEFS			(0x00000001)
 
-/* Bit definitions and macros for SSI_RCR */
 #define SSI_RCR_RXEXT			(0x00000400)
 #define SSI_RCR_RXBIT0			(0x00000200)
 #define SSI_RCR_RFEN1			(0x00000100)
@@ -138,38 +126,44 @@
 #define SSI_RCR_RFSL			(0x00000002)
 #define SSI_RCR_REFS			(0x00000001)
 
-/* Bit definitions and macros for SSI_CCR */
 #define SSI_CCR_DIV2			(0x00040000)
 #define SSI_CCR_PSR			(0x00020000)
-#define SSI_CCR_WL(x)			(((x)&0x0000000F)<<13)
-#define SSI_CCR_DC(x)			(((x)&0x0000001F)<<8)
-#define SSI_CCR_PM(x)			((x)&0x000000FF)
+#define SSI_CCR_WL(x)			(((x) & 0x0F) << 13)
+#define SSI_CCR_WL_MASK			(0xFFFE1FFF)
+#define SSI_CCR_DC(x)			(((x)& 0x1F) << 8)
+#define SSI_CCR_DC_MASK			(0xFFFFE0FF)
+#define SSI_CCR_PM(x)			((x) & 0xFF)
+#define SSI_CCR_PM_MASK			(0xFFFFFF00)
 
-/* Bit definitions and macros for SSI_FCSR */
-#define SSI_FCSR_RFCNT1(x)		(((x)&0x0000000F)<<28)
-#define SSI_FCSR_TFCNT1(x)		(((x)&0x0000000F)<<24)
-#define SSI_FCSR_RFWM1(x)		(((x)&0x0000000F)<<20)
-#define SSI_FCSR_TFWM1(x)		(((x)&0x0000000F)<<16)
-#define SSI_FCSR_RFCNT0(x)		(((x)&0x0000000F)<<12)
-#define SSI_FCSR_TFCNT0(x)		(((x)&0x0000000F)<<8)
-#define SSI_FCSR_RFWM0(x)		(((x)&0x0000000F)<<4)
-#define SSI_FCSR_TFWM0(x)		((x)&0x0000000F)
+#define SSI_FCSR_RFCNT1(x)		(((x) & 0x0F) << 28)
+#define SSI_FCSR_RFCNT1_MASK		(0x0FFFFFFF)
+#define SSI_FCSR_TFCNT1(x)		(((x) & 0x0F) << 24)
+#define SSI_FCSR_TFCNT1_MASK		(0xF0FFFFFF)
+#define SSI_FCSR_RFWM1(x)		(((x) & 0x0F) << 20)
+#define SSI_FCSR_RFWM1_MASK		(0xFF0FFFFF)
+#define SSI_FCSR_TFWM1(x)		(((x) & 0x0F) << 16)
+#define SSI_FCSR_TFWM1_MASK		(0xFFF0FFFF)
+#define SSI_FCSR_RFCNT0(x)		(((x) & 0x0F) << 12)
+#define SSI_FCSR_RFCNT0_MASK		(0xFFFF0FFF)
+#define SSI_FCSR_TFCNT0(x)		(((x) & 0x0F) << 8)
+#define SSI_FCSR_TFCNT0_MASK		(0xFFFFF0FF)
+#define SSI_FCSR_RFWM0(x)		(((x) & 0x0F) << 4)
+#define SSI_FCSR_RFWM0_MASK		(0xFFFFFF0F)
+#define SSI_FCSR_TFWM0(x)		((x) & 0x0F)
+#define SSI_FCSR_TFWM0_MASK		(0xFFFFFFF0)
 
-/* Bit definitions and macros for SSI_ACR */
-#define SSI_ACR_FRDIV(x)		(((x)&0x0000003F)<<5)
+#define SSI_ACR_FRDIV(x)		(((x) & 0x3F) << 5)
+#define SSI_ACR_FRDIV_MASK		(0xFFFFF81F)
 #define SSI_ACR_WR			(0x00000010)
 #define SSI_ACR_RD			(0x00000008)
 #define SSI_ACR_TIF			(0x00000004)
 #define SSI_ACR_FV			(0x00000002)
 #define SSI_ACR_AC97EN			(0x00000001)
 
-/* Bit definitions and macros for SSI_ACADD */
-#define SSI_ACADD_SSI_ACADD(x)		((x)&0x0007FFFF)
+#define SSI_ACADD_SSI_ACADD(x)		((x) & 0x0007FFFF)
 
-/* Bit definitions and macros for SSI_ACDAT */
-#define SSI_ACDAT_SSI_ACDAT(x)		((x)&0x0007FFFF)
+#define SSI_ACDAT_SSI_ACDAT(x)		((x) & 0x0007FFFF)
 
-/* Bit definitions and macros for SSI_ATAG */
-#define SSI_ATAG_DDI_ATAG(x)		((x)&0x0000FFFF)
+#define SSI_ATAG_DDI_ATAG(x)		((x) & 0x0000FFFF)
 
 #endif					/* __SSI_H__ */
diff --git a/include/asm-m68k/fec.h b/include/asm-m68k/fec.h
index e639599..49311e5 100644
--- a/include/asm-m68k/fec.h
+++ b/include/asm-m68k/fec.h
@@ -351,4 +351,16 @@
 #define	FEC_RESET_DELAY			100
 #define FEC_RX_TOUT			100
 
+int fecpin_setclear(struct eth_device *dev, int setclear);
+
+#ifdef CONFIG_SYS_DISCOVER_PHY
+void __mii_init(void);
+uint mii_send(uint mii_cmd);
+int mii_discover_phy(struct eth_device *dev);
+int mcffec_miiphy_read(char *devname, unsigned char addr,
+		       unsigned char reg, unsigned short *value);
+int mcffec_miiphy_write(char *devname, unsigned char addr,
+			unsigned char reg, unsigned short value);
+#endif
+
 #endif				/* fec_h */
diff --git a/include/asm-m68k/fsl_mcdmafec.h b/include/asm-m68k/fsl_mcdmafec.h
index 82da593..7e54056 100644
--- a/include/asm-m68k/fsl_mcdmafec.h
+++ b/include/asm-m68k/fsl_mcdmafec.h
@@ -164,13 +164,4 @@
 #define FIFO_CTRL_UFMASK	(0x00100000)
 #define FIFO_CTRL_OFMASK	(0x00080000)
 
-int fecpin_setclear(struct eth_device *dev, int setclear);
-void mii_init(void);
-uint mii_send(uint mii_cmd);
-int mii_discover_phy(struct eth_device *dev);
-int mcffec_miiphy_read(char *devname, unsigned char addr,
-		       unsigned char reg, unsigned short *value);
-int mcffec_miiphy_write(char *devname, unsigned char addr,
-			unsigned char reg, unsigned short value);
-
 #endif				/* fsl_mcdmafec_h */
diff --git a/include/asm-m68k/immap.h b/include/asm-m68k/immap.h
index ccd7c2b..93f730f 100644
--- a/include/asm-m68k/immap.h
+++ b/include/asm-m68k/immap.h
@@ -227,6 +227,38 @@
 #endif
 #endif				/* CONFIG_M5282 */
 
+#if defined(CONFIG_MCF5301x)
+#include <asm/immap_5301x.h>
+#include <asm/m5301x.h>
+
+#define CONFIG_SYS_FEC0_IOBASE		(MMAP_FEC0)
+#define CONFIG_SYS_FEC1_IOBASE		(MMAP_FEC1)
+#define CONFIG_SYS_UART_BASE		(MMAP_UART0 + (CONFIG_SYS_UART_PORT * 0x4000))
+
+#define CONFIG_SYS_MCFRTC_BASE		(MMAP_RTC)
+
+/* Timer */
+#ifdef CONFIG_MCFTMR
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_DTMR0)
+#define CONFIG_SYS_TMR_BASE		(MMAP_DTMR1)
+#define CONFIG_SYS_TMRPND_REG		(((volatile int0_t *)(CONFIG_SYS_INTR_BASE))->iprh0)
+#define CONFIG_SYS_TMRINTR_NO		(INT0_HI_DTMR1)
+#define CONFIG_SYS_TMRINTR_MASK		(INTC_IPRH_INT33)
+#define CONFIG_SYS_TMRINTR_PEND		(CONFIG_SYS_TMRINTR_MASK)
+#define CONFIG_SYS_TMRINTR_PRI		(6)
+#define CONFIG_SYS_TIMER_PRESCALER	(((gd->bus_clk / 1000000) - 1) << 8)
+#endif
+
+#ifdef CONFIG_MCFPIT
+#define CONFIG_SYS_UDELAY_BASE		(MMAP_PIT0)
+#define CONFIG_SYS_PIT_BASE		(MMAP_PIT1)
+#define CONFIG_SYS_PIT_PRESCALE	(6)
+#endif
+
+#define CONFIG_SYS_INTR_BASE		(MMAP_INTC0)
+#define CONFIG_SYS_NUM_IRQS		(128)
+#endif				/* CONFIG_M5301x */
+
 #if defined(CONFIG_M5329) || defined(CONFIG_M5373)
 #include <asm/immap_5329.h>
 #include <asm/m5329.h>
diff --git a/include/asm-m68k/immap_5227x.h b/include/asm-m68k/immap_5227x.h
index 83da3d5..6f65f50 100644
--- a/include/asm-m68k/immap_5227x.h
+++ b/include/asm-m68k/immap_5227x.h
@@ -69,109 +69,14 @@
 #include <asm/coldfire/crossbar.h>
 #include <asm/coldfire/dspi.h>
 #include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
 #include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
 #include <asm/coldfire/lcd.h>
+#include <asm/coldfire/pwm.h>
 #include <asm/coldfire/ssi.h>
 
-/* Interrupt Controller (INTC) */
-typedef struct int0_ctrl {
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 - 0x19 */
-	u16 icfg0;		/* 0x1A Configuration Register */
-	u8 simr0;		/* 0x1C Set Interrupt Mask */
-	u8 cimr0;		/* 0x1D Clear Interrupt Mask */
-	u8 clmask0;		/* 0x1E Current Level Mask */
-	u8 slmask;		/* 0x1F Saved Level Mask */
-	u32 res2[8];		/* 0x20 - 0x3F */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt ack */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt ack */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt ack */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt ack */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt ack */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt ack */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt ack */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt ack */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
-
-typedef struct int1_ctrl {
-	/* Interrupt Controller 1 */
-	u32 iprh1;		/* 0x00 Pending Register High */
-	u32 iprl1;		/* 0x04 Pending Register Low */
-	u32 imrh1;		/* 0x08 Mask Register High */
-	u32 imrl1;		/* 0x0C Mask Register Low */
-	u32 frch1;		/* 0x10 Force Register High */
-	u32 frcl1;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 */
-	u16 icfg1;		/* 0x1A Configuration Register */
-	u8 simr1;		/* 0x1C Set Interrupt Mask */
-	u8 cimr1;		/* 0x1D Clear Interrupt Mask */
-	u16 res2;		/* 0x1E - 0x1F */
-	u32 res3[8];		/* 0x20 - 0x3F */
-	u8 icr1[64];		/* 0x40 - 0x7F */
-	u32 res4[24];		/* 0x80 - 0xDF */
-	u8 swiack1;		/* 0xE0 Software Interrupt ack */
-	u8 res5[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack1_1;		/* 0xE4 Level n interrupt ack */
-	u8 res6[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack1_2;		/* 0xE8 Level n interrupt ack */
-	u8 res7[3];		/* 0xE9 - 0xEB */
-	u8 Lniack1_3;		/* 0xEC Level n interrupt ack */
-	u8 res8[3];		/* 0xED - 0xEF */
-	u8 Lniack1_4;		/* 0xF0 Level n interrupt ack */
-	u8 res9[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack1_5;		/* 0xF4 Level n interrupt ack */
-	u8 resa[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack1_6;		/* 0xF8 Level n interrupt ack */
-	u8 resb[3];		/* 0xF9 - 0xFB */
-	u8 Lniack1_7;		/* 0xFC Level n interrupt ack */
-	u8 resc[3];		/* 0xFD - 0xFF */
-} int1_t;
-
-/* Global Interrupt Acknowledge (IACK) */
-typedef struct iack {
-	u8 resv0[0xE0];
-	u8 gswiack;
-	u8 resv1[0x3];
-	u8 gl1iack;
-	u8 resv2[0x3];
-	u8 gl2iack;
-	u8 resv3[0x3];
-	u8 gl3iack;
-	u8 resv4[0x3];
-	u8 gl4iack;
-	u8 resv5[0x3];
-	u8 gl5iack;
-	u8 resv6[0x3];
-	u8 gl6iack;
-	u8 resv7[0x3];
-	u8 gl7iack;
-} iack_t;
-
-/* Edge Port Module (EPORT) */
-typedef struct eport {
-	u16 eppar;
-	u8 epddr;
-	u8 epier;
-	u8 epdr;
-	u8 eppdr;
-	u8 epfr;
-} eport_t;
-
 /* Reset Controller Module (RCM) */
 typedef struct rcm {
 	u8 rcr;
@@ -193,6 +98,12 @@
 	u16 sbfcr;		/* Serial Boot Control */
 } ccm_t;
 
+typedef struct canex_ctrl {
+	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
+	u32 res0[0x700];	/* 0x100 */
+	can_msg_t rxim[16];	/* 0x800 Rx Individual Mask 0-15 */
+} canex_t;
+
 /* General Purpose I/O Module (GPIO) */
 typedef struct gpio {
 	/* Port Output Data Registers */
diff --git a/include/asm-m68k/immap_5235.h b/include/asm-m68k/immap_5235.h
index 3ef0321..f7f35fc 100644
--- a/include/asm-m68k/immap_5235.h
+++ b/include/asm-m68k/immap_5235.h
@@ -63,6 +63,15 @@
 #define MMAP_ETPU	(CONFIG_SYS_MBAR + 0x001D0000)
 #define MMAP_CAN2	(CONFIG_SYS_MBAR + 0x001F0000)
 
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/mdha.h>
+#include <asm/coldfire/qspi.h>
+#include <asm/coldfire/rng.h>
+#include <asm/coldfire/skha.h>
+
 /* System Control Module register */
 typedef struct scm_ctrl {
 	u32 ipsbar;		/* 0x00 - MBAR */
@@ -104,141 +113,9 @@
 	u32 dmr1;		/* 0x14 mask register block 1 */
 } sdram_t;
 
-/* Flexbus module Chip select registers */
-typedef struct fbcs_ctrl {
-	u16 csar0;		/* 0x00 Chip-Select Address Register 0 */
-	u16 res0;
-	u32 csmr0;		/* 0x04 Chip-Select Mask Register 0 */
-	u16 res1;		/* 0x08 */
-	u16 cscr0;		/* 0x0A Chip-Select Control Register 0 */
-
-	u16 csar1;		/* 0x0C Chip-Select Address Register 1 */
-	u16 res2;
-	u32 csmr1;		/* 0x10 Chip-Select Mask Register 1 */
-	u16 res3;		/* 0x14 */
-	u16 cscr1;		/* 0x16 Chip-Select Control Register 1 */
-
-	u16 csar2;		/* 0x18 Chip-Select Address Register 2 */
-	u16 res4;
-	u32 csmr2;		/* 0x1C Chip-Select Mask Register 2 */
-	u16 res5;		/* 0x20 */
-	u16 cscr2;		/* 0x22 Chip-Select Control Register 2 */
-
-	u16 csar3;		/* 0x24 Chip-Select Address Register 3 */
-	u16 res6;
-	u32 csmr3;		/* 0x28 Chip-Select Mask Register 3 */
-	u16 res7;		/* 0x2C */
-	u16 cscr3;		/* 0x2E Chip-Select Control Register 3 */
-
-	u16 csar4;		/* 0x30 Chip-Select Address Register 4 */
-	u16 res8;
-	u32 csmr4;		/* 0x34 Chip-Select Mask Register 4 */
-	u16 res9;		/* 0x38 */
-	u16 cscr4;		/* 0x3A Chip-Select Control Register 4 */
-
-	u16 csar5;		/* 0x3C Chip-Select Address Register 5 */
-	u16 res10;
-	u32 csmr5;		/* 0x40 Chip-Select Mask Register 5 */
-	u16 res11;		/* 0x44 */
-	u16 cscr5;		/* 0x46 Chip-Select Control Register 5 */
-
-	u16 csar6;		/* 0x48 Chip-Select Address Register 5 */
-	u16 res12;
-	u32 csmr6;		/* 0x4C Chip-Select Mask Register 5 */
-	u16 res13;		/* 0x50 */
-	u16 cscr6;		/* 0x52 Chip-Select Control Register 5 */
-
-	u16 csar7;		/* 0x54 Chip-Select Address Register 5 */
-	u16 res14;
-	u32 csmr7;		/* 0x58 Chip-Select Mask Register 5 */
-	u16 res15;		/* 0x5C */
-	u16 cscr7;		/* 0x5E Chip-Select Control Register 5 */
-} fbcs_t;
-
-/* QSPI module registers */
-typedef struct qspi_ctrl {
-	u16 qmr;		/* Mode register */
-	u16 res1;
-	u16 qdlyr;		/* Delay register */
-	u16 res2;
-	u16 qwr;		/* Wrap register */
-	u16 res3;
-	u16 qir;		/* Interrupt register */
-	u16 res4;
-	u16 qar;		/* Address register */
-	u16 res5;
-	u16 qdr;		/* Data register */
-	u16 res6;
-} qspi_t;
-
-/* Interrupt module registers */
-typedef struct int0_ctrl {
-	/* Interrupt Controller 0 */
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u8 irlr;		/* 0x18 */
-	u8 iacklpr;		/* 0x19 */
-	u16 res1[19];		/* 0x1a - 0x3c */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
-
-typedef struct int1_ctrl {
-	/* Interrupt Controller 1 */
-	u32 iprh1;		/* 0x00 Pending Register High */
-	u32 iprl1;		/* 0x04 Pending Register Low */
-	u32 imrh1;		/* 0x08 Mask Register High */
-	u32 imrl1;		/* 0x0C Mask Register Low */
-	u32 frch1;		/* 0x10 Force Register High */
-	u32 frcl1;		/* 0x14 Force Register Low */
-	u8 irlr;		/* 0x18 */
-	u8 iacklpr;		/* 0x19 */
-	u16 res1[19];		/* 0x1a - 0x3c */
-	u8 icr1[64];		/* 0x40 - 0x7F */
-	u32 res4[24];		/* 0x80 - 0xDF */
-	u8 swiack1;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res5[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack1_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack1_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xE9 - 0xEB */
-	u8 Lniack1_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xED - 0xEF */
-	u8 Lniack1_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack1_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack1_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xF9 - 0xFB */
-	u8 Lniack1_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resc[3];		/* 0xFD - 0xFF */
-} int1_t;
-
-typedef struct intgack_ctrl1 {
-	/* Global IACK Registers */
-	u8 swiack;		/* 0xE0 Global Software Interrupt Acknowledge */
-	u8 Lniack[7];		/* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */
-} intgack_t;
+typedef struct canex_ctrl {
+	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
+} canex_t;
 
 /* GPIO port registers */
 typedef struct gpio_ctrl {
@@ -356,23 +233,4 @@
 	u16 sr;			/* 0x06 Service register */
 } wdog_t;
 
-/* FlexCan module registers */
-typedef struct can_ctrl {
-	u32 mcr;		/* 0x00 Module Configuration register */
-	u32 ctrl;		/* 0x04 Control register */
-	u32 timer;		/* 0x08 Free Running Timer */
-	u32 res1;		/* 0x0C */
-	u32 rxgmask;		/* 0x10 Rx Global Mask */
-	u32 rx14mask;		/* 0x14 RxBuffer 14 Mask */
-	u32 rx15mask;		/* 0x18 RxBuffer 15 Mask */
-	u32 errcnt;		/* 0x1C Error Counter Register */
-	u32 errstat;		/* 0x20 Error and status Register */
-	u32 res2;		/* 0x24 */
-	u32 imask;		/* 0x28 Interrupt Mask Register */
-	u32 res3;		/* 0x2C */
-	u32 iflag;		/* 0x30 Interrupt Flag Register */
-	u32 res4[19];		/* 0x34 - 0x7F */
-	u32 MB0_15[2048];	/* 0x80 Message Buffer 0-15 */
-} can_t;
-
 #endif				/* __IMMAP_5235__ */
diff --git a/include/asm-m68k/immap_5249.h b/include/asm-m68k/immap_5249.h
index 6b57ba7..0242086 100644
--- a/include/asm-m68k/immap_5249.h
+++ b/include/asm-m68k/immap_5249.h
@@ -26,10 +26,14 @@
 #define __IMMAP_5249__
 
 #define MMAP_INTC		(CONFIG_SYS_MBAR + 0x00000040)
+#define MMAP_FBCS		(CONFIG_SYS_MBAR + 0x00000080)
 #define MMAP_DTMR0		(CONFIG_SYS_MBAR + 0x00000140)
 #define MMAP_DTMR1		(CONFIG_SYS_MBAR + 0x00000180)
 #define MMAP_UART0		(CONFIG_SYS_MBAR + 0x000001C0)
 #define MMAP_UART1		(CONFIG_SYS_MBAR + 0x00000200)
 #define MMAP_QSPI		(CONFIG_SYS_MBAR + 0x00000400)
 
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/qspi.h>
+
 #endif				/* __IMMAP_5249__ */
diff --git a/include/asm-m68k/immap_5253.h b/include/asm-m68k/immap_5253.h
index 4e3a481..b5a4cb5 100644
--- a/include/asm-m68k/immap_5253.h
+++ b/include/asm-m68k/immap_5253.h
@@ -23,10 +23,11 @@
  * MA 02111-1307 USA
  */
 
-#ifndef __IMMAP_5249__
-#define __IMMAP_5249__
+#ifndef __IMMAP_5253__
+#define __IMMAP_5253__
 
 #define MMAP_INTC		(CONFIG_SYS_MBAR + 0x00000040)
+#define MMAP_FBCS		(CONFIG_SYS_MBAR + 0x00000080)
 #define MMAP_DTMR0		(CONFIG_SYS_MBAR + 0x00000140)
 #define MMAP_DTMR1		(CONFIG_SYS_MBAR + 0x00000180)
 #define MMAP_UART0		(CONFIG_SYS_MBAR + 0x000001C0)
@@ -39,57 +40,13 @@
 #define MMAP_I2C1		(CONFIG_SYS_MBAR2 + 0x00000440)
 #define MMAP_UART2		(CONFIG_SYS_MBAR2 + 0x00000C00)
 
-/*********************************************************************
-* ATA Module (ATAC)
-*********************************************************************/
+#include <asm/coldfire/ata.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/qspi.h>
 
-/* Register read/write struct */
-typedef struct atac {
-	/* PIO */
-	u8 toff;		/* 0x00 */
-	u8 ton;			/* 0x01 */
-	u8 t1;			/* 0x02 */
-	u8 t2w;			/* 0x03 */
-	u8 t2r;			/* 0x04 */
-	u8 ta;			/* 0x05 */
-	u8 trd;			/* 0x06 */
-	u8 t4;			/* 0x07 */
-	u8 t9;			/* 0x08 */
+typedef struct canex_ctrl {
+	can_msg_t msg[32];	/* 0x80 Message Buffer 0-31 */
+} canex_t;
 
-	/* DMA */
-	u8 tm;			/* 0x09 */
-	u8 tn;			/* 0x0A */
-	u8 td;			/* 0x0B */
-	u8 tk;			/* 0x0C */
-	u8 tack;		/* 0x0D */
-	u8 tenv;		/* 0x0E */
-	u8 trp;			/* 0x0F */
-	u8 tzah;		/* 0x10 */
-	u8 tmli;		/* 0x11 */
-	u8 tdvh;		/* 0x12 */
-	u8 tdzfs;		/* 0x13 */
-	u8 tdvs;		/* 0x14 */
-	u8 tcvh;		/* 0x15 */
-	u8 tss;			/* 0x16 */
-	u8 tcyc;		/* 0x17 */
-
-	/* FIFO */
-	u32 fifo32;		/* 0x18 */
-	u16 fifo16;		/* 0x1C */
-	u8 rsvd0[2];
-	u8 ffill;		/* 0x20 */
-	u8 rsvd1[3];
-
-	/* ATA */
-	u8 cr;			/* 0x24 */
-	u8 rsvd2[3];
-	u8 isr;			/* 0x28 */
-	u8 rsvd3[3];
-	u8 ier;			/* 0x2C */
-	u8 rsvd4[3];
-	u8 icr;			/* 0x30 */
-	u8 rsvd5[3];
-	u8 falarm;		/* 0x34 */
-} atac_t;
-
-#endif				/* __IMMAP_5249__ */
+#endif				/* __IMMAP_5253__ */
diff --git a/include/asm-m68k/immap_5271.h b/include/asm-m68k/immap_5271.h
index 462d5f2..8ddec5c 100644
--- a/include/asm-m68k/immap_5271.h
+++ b/include/asm-m68k/immap_5271.h
@@ -63,36 +63,13 @@
 #define MMAP_ETPU	(CONFIG_SYS_MBAR + 0x001D0000)
 #define MMAP_CAN2	(CONFIG_SYS_MBAR + 0x001F0000)
 
-/* Interrupt module registers */
-typedef struct int0_ctrl {
-	/* Interrupt Controller 0 */
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u8 irlr;		/* 0x18 */
-	u8 iacklpr;		/* 0x19 */
-	u16 res1[19];		/* 0x1a - 0x3c */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/mdha.h>
+#include <asm/coldfire/qspi.h>
+#include <asm/coldfire/rng.h>
+#include <asm/coldfire/skha.h>
+
 
 #endif				/* __IMMAP_5271__ */
diff --git a/include/asm-m68k/immap_5272.h b/include/asm-m68k/immap_5272.h
index b106289..8d4254b 100644
--- a/include/asm-m68k/immap_5272.h
+++ b/include/asm-m68k/immap_5272.h
@@ -44,6 +44,8 @@
 #define MMAP_FEC	(CONFIG_SYS_MBAR + 0x00000840)
 #define MMAP_USB	(CONFIG_SYS_MBAR + 0x00001000)
 
+#include <asm/coldfire/pwm.h>
+
 /* System configuration registers */
 typedef struct sys_ctrl {
 	uint sc_mbar;
@@ -104,38 +106,6 @@
 	uchar res2[4];
 } gpio_t;
 
-/* QSPI module registers */
-typedef struct qspi_ctrl {
-	ushort qspi_qmr;
-	uchar res1[2];
-	ushort qspi_qdlyr;
-	uchar res2[2];
-	ushort qspi_qwr;
-	uchar res3[2];
-	ushort qspi_qir;
-	uchar res4[2];
-	ushort qspi_qar;
-	uchar res5[2];
-	ushort qspi_qdr;
-	uchar res6[10];
-} qspi_t;
-
-/* PWM module registers */
-typedef struct pwm_ctrl {
-	uchar pwm_pwcr0;
-	uchar res1[3];
-	uchar pwm_pwcr1;
-	uchar res2[3];
-	uchar pwm_pwcr2;
-	uchar res3[7];
-	uchar pwm_pwwd0;
-	uchar res4[3];
-	uchar pwm_pwwd1;
-	uchar res5[3];
-	uchar pwm_pwwd2;
-	uchar res6[7];
-} pwm_t;
-
 /* DMA module registers */
 typedef struct dma_ctrl {
 	ulong dma_dmr;
diff --git a/include/asm-m68k/immap_5275.h b/include/asm-m68k/immap_5275.h
index 495010b..46426a3 100644
--- a/include/asm-m68k/immap_5275.h
+++ b/include/asm-m68k/immap_5275.h
@@ -66,6 +66,15 @@
 #define MMAP_USB	(CONFIG_SYS_MBAR + 0x001C0000)
 #define MMAP_PWM0	(CONFIG_SYS_MBAR + 0x001D0000)
 
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/mdha.h>
+#include <asm/coldfire/pwm.h>
+#include <asm/coldfire/qspi.h>
+#include <asm/coldfire/rng.h>
+#include <asm/coldfire/skha.h>
+
 /* System configuration registers
 */
 typedef	struct sys_ctrl {
@@ -109,51 +118,6 @@
 	u32 sdbmr1;
 } sdramctrl_t;
 
-/* Chip select module registers, offset: 0x080
-*/
-typedef struct	cs_ctlr {
-	u16 ar0;
-	u16 res1;
-	u32 mr0;
-	u16 res2;
-	u16 cr0;
-	u16 ar1;
-	u16 res3;
-	u32 mr1;
-	u16 res4;
-	u16 cr1;
-	u16 ar2;
-	u16 res5;
-	u32 mr2;
-	u16 res6;
-	u16 cr2;
-	u16 ar3;
-	u16 res7;
-	u32 mr3;
-	u16 res8;
-	u16 cr3;
-	u16 ar4;
-	u16 res9;
-	u32 mr4;
-	u16 res10;
-	u16 cr4;
-	u16 ar5;
-	u16 res11;
-	u32 mr5;
-	u16 res12;
-	u16 cr5;
-	u16 ar6;
-	u16 res13;
-	u32 mr6;
-	u16 res14;
-	u16 cr6;
-	u16 ar7;
-	u16 res15;
-	u32 mr7;
-	u16 res16;
-	u16 cr7;
-} csctrl_t;
-
 /* DMA module registers, offset 0x100
  */
 typedef struct	dma_ctrl {
@@ -163,55 +127,6 @@
 	u32 dcr;
 } dma_t;
 
-/* QSPI module registers, offset 0x340
- */
-typedef struct	qspi_ctrl {
-	u16 qmr;
-	u8 res1[2];
-	u16 qdlyr;
-	u8 res2[2];
-	u16 qwr;
-	u8 res3[2];
-	u16 qir;
-	u8 res4[2];
-	u16 qar;
-	u8 res5[2];
-	u16 qdr;
-	u8 res6[2];
-} qspi_t;
-
-/* Interrupt module registers, offset 0xc00
-*/
-typedef struct int_ctrl {
-	u32 iprh0;
-	u32 iprl0;
-	u32 imrh0;
-	u32 imrl0;
-	u32 frch0;
-	u32 frcl0;
-	u8 irlr;
-	u8 iacklpr;
-	u8 res1[0x26];
-	u8 icr0[64]; /* No ICR0, done this way for readability */
-	u8 res2[0x60];
-	u8 swiack0;
-	u8 res3[3];
-	u8 Lniack0_1;
-	u8 res4[3];
-	u8 Lniack0_2;
-	u8 res5[3];
-	u8 Lniack0_3;
-	u8 res6[3];
-	u8 Lniack0_4;
-	u8 res7[3];
-	u8 Lniack0_5;
-	u8 res8[3];
-	u8 Lniack0_6;
-	u8 res9[3];
-	u8 Lniack0_7;
-	u8 res10[3];
-} int0_t;
-
 /* GPIO port registers
 */
 typedef struct	gpio_ctrl {
@@ -325,23 +240,6 @@
 } gpio_t;
 
 
-/* PWM module registers
- */
-typedef struct	pwm_ctrl {
-	u8 pwcr0;
-	u8 res1[3];
-	u8 pwcr1;
-	u8 res2[3];
-	u8 pwcr2;
-	u8 res3[7];
-	u8 pwwd0;
-	u8 res4[3];
-	u8 pwwd1;
-	u8 res5[3];
-	u8 pwwd2;
-	u8 res6[7];
-} pwm_t;
-
 /* Watchdog registers
  */
 typedef struct wdog_ctrl {
diff --git a/include/asm-m68k/immap_5282.h b/include/asm-m68k/immap_5282.h
index e96463be..dd526a1 100644
--- a/include/asm-m68k/immap_5282.h
+++ b/include/asm-m68k/immap_5282.h
@@ -62,6 +62,12 @@
 #define MMAP_CFMC	(CONFIG_SYS_MBAR + 0x001D0000)
 #define MMAP_CFMMEM	(CONFIG_SYS_MBAR + 0x04000000)
 
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/qspi.h>
+
 /* System Control Module */
 typedef struct scm_ctrl {
 	u32 ipsbar;
@@ -92,88 +98,9 @@
 	u16 res8;
 } scm_t;
 
-/* Flexbus module Chip select registers */
-typedef struct fbcs_ctrl {
-	u16 csar0;		/* 0x00 Chip-Select Address Register 0 */
-	u16 res0;
-	u32 csmr0;		/* 0x04 Chip-Select Mask Register 0 */
-	u16 res1;		/* 0x08 */
-	u16 cscr0;		/* 0x0A Chip-Select Control Register 0 */
-
-	u16 csar1;		/* 0x0C Chip-Select Address Register 1 */
-	u16 res2;
-	u32 csmr1;		/* 0x10 Chip-Select Mask Register 1 */
-	u16 res3;		/* 0x14 */
-	u16 cscr1;		/* 0x16 Chip-Select Control Register 1 */
-
-	u16 csar2;		/* 0x18 Chip-Select Address Register 2 */
-	u16 res4;
-	u32 csmr2;		/* 0x1C Chip-Select Mask Register 2 */
-	u16 res5;		/* 0x20 */
-	u16 cscr2;		/* 0x22 Chip-Select Control Register 2 */
-
-	u16 csar3;		/* 0x24 Chip-Select Address Register 3 */
-	u16 res6;
-	u32 csmr3;		/* 0x28 Chip-Select Mask Register 3 */
-	u16 res7;		/* 0x2C */
-	u16 cscr3;		/* 0x2E Chip-Select Control Register 3 */
-
-	u16 csar4;		/* 0x30 Chip-Select Address Register 4 */
-	u16 res8;
-	u32 csmr4;		/* 0x34 Chip-Select Mask Register 4 */
-	u16 res9;		/* 0x38 */
-	u16 cscr4;		/* 0x3A Chip-Select Control Register 4 */
-
-	u16 csar5;		/* 0x3C Chip-Select Address Register 5 */
-	u16 res10;
-	u32 csmr5;		/* 0x40 Chip-Select Mask Register 5 */
-	u16 res11;		/* 0x44 */
-	u16 cscr5;		/* 0x46 Chip-Select Control Register 5 */
-
-	u16 csar6;		/* 0x48 Chip-Select Address Register 5 */
-	u16 res12;
-	u32 csmr6;		/* 0x4C Chip-Select Mask Register 5 */
-	u16 res13;		/* 0x50 */
-	u16 cscr6;		/* 0x52 Chip-Select Control Register 5 */
-
-	u16 csar7;		/* 0x54 Chip-Select Address Register 5 */
-	u16 res14;
-	u32 csmr7;		/* 0x58 Chip-Select Mask Register 5 */
-	u16 res15;		/* 0x5C */
-	u16 cscr7;		/* 0x5E Chip-Select Control Register 5 */
-} fbcs_t;
-
-/* Interrupt module registers */
-typedef struct int0_ctrl {
-	/* Interrupt Controller 0 */
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u8 irlr;		/* 0x18 */
-	u8 iacklpr;		/* 0x19 */
-	u16 res1[19];		/* 0x1a - 0x3c */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
+typedef struct canex_ctrl {
+	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
+} canex_t;
 
 /* Clock Module registers */
 typedef struct pll_ctrl {
diff --git a/include/asm-m68k/immap_5301x.h b/include/asm-m68k/immap_5301x.h
new file mode 100644
index 0000000..87ac770
--- /dev/null
+++ b/include/asm-m68k/immap_5301x.h
@@ -0,0 +1,324 @@
+/*
+ * MCF5301x Internal Memory Map
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __IMMAP_5301X__
+#define __IMMAP_5301X__
+
+#define MMAP_SCM1	(CONFIG_SYS_MBAR + 0x00000000)
+#define MMAP_XBS	(CONFIG_SYS_MBAR + 0x00004000)
+#define MMAP_FBCS	(CONFIG_SYS_MBAR + 0x00008000)
+#define MMAP_MPU	(CONFIG_SYS_MBAR + 0x00014000)
+#define MMAP_FEC0	(CONFIG_SYS_MBAR + 0x00030000)
+#define MMAP_FEC1	(CONFIG_SYS_MBAR + 0x00034000)
+#define MMAP_SCM2	(CONFIG_SYS_MBAR + 0x00040000)
+#define MMAP_EDMA	(CONFIG_SYS_MBAR + 0x00044000)
+#define MMAP_INTC0	(CONFIG_SYS_MBAR + 0x00048000)
+#define MMAP_INTC1	(CONFIG_SYS_MBAR + 0x0004C000)
+#define MMAP_INTCACK	(CONFIG_SYS_MBAR + 0x00054000)
+#define MMAP_I2C	(CONFIG_SYS_MBAR + 0x00058000)
+#define MMAP_DSPI	(CONFIG_SYS_MBAR + 0x0005C000)
+#define MMAP_UART0	(CONFIG_SYS_MBAR + 0x00060000)
+#define MMAP_UART1	(CONFIG_SYS_MBAR + 0x00064000)
+#define MMAP_UART2	(CONFIG_SYS_MBAR + 0x00068000)
+#define MMAP_DTMR0	(CONFIG_SYS_MBAR + 0x00070000)
+#define MMAP_DTMR1	(CONFIG_SYS_MBAR + 0x00074000)
+#define MMAP_DTMR2	(CONFIG_SYS_MBAR + 0x00078000)
+#define MMAP_DTMR3	(CONFIG_SYS_MBAR + 0x0007C000)
+#define MMAP_PIT0	(CONFIG_SYS_MBAR + 0x00080000)
+#define MMAP_PIT1	(CONFIG_SYS_MBAR + 0x00084000)
+#define MMAP_PIT2	(CONFIG_SYS_MBAR + 0x00088000)
+#define MMAP_PIT3	(CONFIG_SYS_MBAR + 0x0008C000)
+#define MMAP_EPORT0	(CONFIG_SYS_MBAR + 0x00090000)
+#define MMAP_EPORT1	(CONFIG_SYS_MBAR + 0x00094000)
+#define MMAP_VOICOD	(CONFIG_SYS_MBAR + 0x0009C000)
+#define MMAP_RCM	(CONFIG_SYS_MBAR + 0x000A0000)
+#define MMAP_CCM	(CONFIG_SYS_MBAR + 0x000A0004)
+#define MMAP_GPIO	(CONFIG_SYS_MBAR + 0x000A4000)
+#define MMAP_RTC	(CONFIG_SYS_MBAR + 0x000A8000)
+#define MMAP_SIM	(CONFIG_SYS_MBAR + 0x000AC000)
+#define MMAP_USBOTG	(CONFIG_SYS_MBAR + 0x000B0000)
+#define MMAP_USBH	(CONFIG_SYS_MBAR + 0x000B4000)
+#define MMAP_SDRAM	(CONFIG_SYS_MBAR + 0x000B8000)
+#define MMAP_SSI	(CONFIG_SYS_MBAR + 0x000BC000)
+#define MMAP_PLL	(CONFIG_SYS_MBAR + 0x000C0000)
+#define MMAP_RNG	(CONFIG_SYS_MBAR + 0x000C4000)
+#define MMAP_IIM	(CONFIG_SYS_MBAR + 0x000C8000)
+#define MMAP_ESDHC	(CONFIG_SYS_MBAR + 0x000CC000)
+
+#include <asm/coldfire/crossbar.h>
+#include <asm/coldfire/dspi.h>
+#include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/intctrl.h>
+#include <asm/coldfire/ssi.h>
+#include <asm/coldfire/rng.h>
+#include <asm/rtc.h>
+
+/* System Controller Module */
+typedef struct scm1 {
+	u32 mpr;		/* 0x00 Master Privilege */
+	u32 rsvd1[7];
+	u32 pacra;		/* 0x20 Peripheral Access Ctrl A */
+	u32 pacrb;		/* 0x24 Peripheral Access Ctrl B */
+	u32 pacrc;		/* 0x28 Peripheral Access Ctrl C */
+	u32 pacrd;		/* 0x2C Peripheral Access Ctrl D */
+	u32 rsvd2[4];
+	u32 pacre;		/* 0x40 Peripheral Access Ctrl E */
+	u32 pacrf;		/* 0x44 Peripheral Access Ctrl F */
+	u32 pacrg;		/* 0x48 Peripheral Access Ctrl G */
+} scm1_t;
+
+typedef struct scm2 {
+	u8 rsvd1[19];		/* 0x00 - 0x12 */
+	u8 wcr;			/* 0x13 */
+	u16 rsvd2;		/* 0x14 - 0x15 */
+	u16 cwcr;		/* 0x16 */
+	u8 rsvd3[3];		/* 0x18 - 0x1A */
+	u8 cwsr;		/* 0x1B */
+	u8 rsvd4[3];		/* 0x1C - 0x1E */
+	u8 scmisr;		/* 0x1F */
+	u32 rsvd5;		/* 0x20 - 0x23 */
+	u8 bcr;			/* 0x24 */
+	u8 rsvd6[74];		/* 0x25 - 0x6F */
+	u32 cfadr;		/* 0x70 */
+	u8 rsvd7;		/* 0x74 */
+	u8 cfier;		/* 0x75 */
+	u8 cfloc;		/* 0x76 */
+	u8 cfatr;		/* 0x77 */
+	u32 rsvd8;		/* 0x78 - 0x7B */
+	u32 cfdtr;		/* 0x7C */
+} scm2_t;
+
+/* PWM module */
+typedef struct pwm_ctrl {
+	u8 en;			/* 0x00 PWM Enable */
+	u8 pol;			/* 0x01 Polarity */
+	u8 clk;			/* 0x02 Clock Select */
+	u8 prclk;		/* 0x03 Prescale Clock Select */
+	u8 cae;			/* 0x04 Center Align Enable */
+	u8 ctl;			/* 0x05 Ctrl */
+	u8 res1[2];		/* 0x06 - 0x07 */
+	u8 scla;		/* 0x08 Scale A */
+	u8 sclb;		/* 0x09 Scale B */
+	u8 res2[2];		/* 0x0A - 0x0B */
+	u8 cnt0;		/* 0x0C Channel 0 Counter */
+	u8 cnt1;		/* 0x0D Channel 1 Counter */
+	u8 cnt2;		/* 0x0E Channel 2 Counter */
+	u8 cnt3;		/* 0x0F Channel 3 Counter */
+	u8 cnt4;		/* 0x10 Channel 4 Counter */
+	u8 cnt5;		/* 0x11 Channel 5 Counter */
+	u8 cnt6;		/* 0x12 Channel 6 Counter */
+	u8 cnt7;		/* 0x13 Channel 7 Counter */
+	u8 per0;		/* 0x14 Channel 0 Period */
+	u8 per1;		/* 0x15 Channel 1 Period */
+	u8 per2;		/* 0x16 Channel 2 Period */
+	u8 per3;		/* 0x17 Channel 3 Period */
+	u8 per4;		/* 0x18 Channel 4 Period */
+	u8 per5;		/* 0x19 Channel 5 Period */
+	u8 per6;		/* 0x1A Channel 6 Period */
+	u8 per7;		/* 0x1B Channel 7 Period */
+	u8 dty0;		/* 0x1C Channel 0 Duty */
+	u8 dty1;		/* 0x1D Channel 1 Duty */
+	u8 dty2;		/* 0x1E Channel 2 Duty */
+	u8 dty3;		/* 0x1F Channel 3 Duty */
+	u8 dty4;		/* 0x20 Channel 4 Duty */
+	u8 dty5;		/* 0x21 Channel 5 Duty */
+	u8 dty6;		/* 0x22 Channel 6 Duty */
+	u8 dty7;		/* 0x23 Channel 7 Duty */
+	u8 sdn;			/* 0x24 Shutdown */
+	u8 res3[3];		/* 0x25 - 0x27 */
+} pwm_t;
+
+/* Chip configuration module */
+typedef struct rcm {
+	u8 rcr;
+	u8 rsr;
+} rcm_t;
+
+typedef struct ccm_ctrl {
+	u16 ccr;		/* 0x00 Chip Cfg */
+	u16 res1;		/* 0x02 */
+	u16 rcon;		/* 0x04 Reset Cfg */
+	u16 cir;		/* 0x06 Chip ID */
+	u32 res2;		/* 0x08 */
+	u16 misccr;		/* 0x0A Misc Ctrl */
+	u16 cdr;		/* 0x0C Clock divider */
+	u16 uhcsr;		/* 0x10 USB Host status */
+	u16 uocsr;		/* 0x12 USB On-the-Go Status */
+	u16 res3;		/* 0x14 */
+	u16 codeccr;		/* 0x16 Codec Control */
+	u16 misccr2;		/* 0x18 Misc2 Ctrl */
+} ccm_t;
+
+/* GPIO port */
+typedef struct gpio_ctrl {
+	/* Port Output Data */
+	u8 podr_fbctl;		/* 0x00 */
+	u8 podr_be;		/* 0x01 */
+	u8 podr_cs;		/* 0x02 */
+	u8 podr_dspi;		/* 0x03 */
+	u8 res01;		/* 0x04 */
+	u8 podr_fec0;		/* 0x05 */
+	u8 podr_feci2c;		/* 0x06 */
+	u8 res02[2];		/* 0x07 - 0x08 */
+	u8 podr_simp1;		/* 0x09 */
+	u8 podr_simp0;		/* 0x0A */
+	u8 podr_timer;		/* 0x0B */
+	u8 podr_uart;		/* 0x0C */
+	u8 podr_debug;		/* 0x0D */
+	u8 res03;		/* 0x0E */
+	u8 podr_sdhc;		/* 0x0F */
+	u8 podr_ssi;		/* 0x10 */
+	u8 res04[3];		/* 0x11 - 0x13 */
+
+	/* Port Data Direction */
+	u8 pddr_fbctl;		/* 0x14 */
+	u8 pddr_be;		/* 0x15 */
+	u8 pddr_cs;		/* 0x16 */
+	u8 pddr_dspi;		/* 0x17 */
+	u8 res05;		/* 0x18 */
+	u8 pddr_fec0;		/* 0x19 */
+	u8 pddr_feci2c;		/* 0x1A */
+	u8 res06[2];		/* 0x1B - 0x1C */
+	u8 pddr_simp1;		/* 0x1D */
+	u8 pddr_simp0;		/* 0x1E */
+	u8 pddr_timer;		/* 0x1F */
+	u8 pddr_uart;		/* 0x20 */
+	u8 pddr_debug;		/* 0x21 */
+	u8 res07;		/* 0x22 */
+	u8 pddr_sdhc;		/* 0x23 */
+	u8 pddr_ssi;		/* 0x24 */
+	u8 res08[3];		/* 0x25 - 0x27 */
+
+	/* Port Data Direction */
+	u8 ppdr_fbctl;		/* 0x28 */
+	u8 ppdr_be;		/* 0x29 */
+	u8 ppdr_cs;		/* 0x2A */
+	u8 ppdr_dspi;		/* 0x2B */
+	u8 res09;		/* 0x2C */
+	u8 ppdr_fec0;		/* 0x2D */
+	u8 ppdr_feci2c;		/* 0x2E */
+	u8 res10[2];		/* 0x2F - 0x30 */
+	u8 ppdr_simp1;		/* 0x31 */
+	u8 ppdr_simp0;		/* 0x32 */
+	u8 ppdr_timer;		/* 0x33 */
+	u8 ppdr_uart;		/* 0x34 */
+	u8 ppdr_debug;		/* 0x35 */
+	u8 res11;		/* 0x36 */
+	u8 ppdr_sdhc;		/* 0x37 */
+	u8 ppdr_ssi;		/* 0x38 */
+	u8 res12[3];		/* 0x39 - 0x3B */
+
+	/* Port Clear Output Data */
+	u8 pclrr_fbctl;		/* 0x3C */
+	u8 pclrr_be;		/* 0x3D */
+	u8 pclrr_cs;		/* 0x3E */
+	u8 pclrr_dspi;		/* 0x3F */
+	u8 res13;		/* 0x40 */
+	u8 pclrr_fec0;		/* 0x41 */
+	u8 pclrr_feci2c;	/* 0x42 */
+	u8 res14[2];		/* 0x43 - 0x44 */
+	u8 pclrr_simp1;		/* 0x45 */
+	u8 pclrr_simp0;		/* 0x46 */
+	u8 pclrr_timer;		/* 0x47 */
+	u8 pclrr_uart;		/* 0x48 */
+	u8 pclrr_debug;		/* 0x49 */
+	u8 res15;		/* 0x4A */
+	u8 pclrr_sdhc;		/* 0x4B */
+	u8 pclrr_ssi;		/* 0x4C */
+	u8 res16[3];		/* 0x4D - 0x4F */
+
+	/* Pin Assignment */
+	u8 par_fbctl;		/* 0x50 */
+	u8 par_be;		/* 0x51 */
+	u8 par_cs;		/* 0x52 */
+	u8 res17;		/* 0x53 */
+	u8 par_dspih;		/* 0x54 */
+	u8 par_dspil;		/* 0x55 */
+	u8 par_fec;		/* 0x56 */
+	u8 par_feci2c;		/* 0x57 */
+	u8 par_irq0h;		/* 0x58 */
+	u8 par_irq0l;		/* 0x59 */
+	u8 par_irq1h;		/* 0x5A */
+	u8 par_irq1l;		/* 0x5B */
+	u8 par_simp1h;		/* 0x5C */
+	u8 par_simp1l;		/* 0x5D */
+	u8 par_simp0;		/* 0x5E */
+	u8 par_timer;		/* 0x5F */
+	u8 par_uart;		/* 0x60 */
+	u8 res18;		/* 0x61 */
+	u8 par_debug;		/* 0x62 */
+	u8 par_sdhc;		/* 0x63 */
+	u8 par_ssih;		/* 0x64 */
+	u8 par_ssil;		/* 0x65 */
+	u8 res19[2];		/* 0x66 - 0x67 */
+
+	/* Mode Select Control */
+	/* Drive Strength Control */
+	u8 mscr_mscr1;		/* 0x68 */
+	u8 mscr_mscr2;		/* 0x69 */
+	u8 mscr_mscr3;		/* 0x6A */
+	u8 mscr_mscr45;		/* 0x6B */
+	u8 srcr_dspi;		/* 0x6C */
+	u8 dscr_fec;		/* 0x6D */
+	u8 srcr_i2c;		/* 0x6E */
+	u8 srcr_irq;		/* 0x6F */
+
+	u8 srcr_sim;		/* 0x70 */
+	u8 srcr_timer;		/* 0x71 */
+	u8 srcr_uart;		/* 0x72 */
+	u8 res20;		/* 0x73 */
+	u8 srcr_sdhc;		/* 0x74 */
+	u8 srcr_ssi;		/* 0x75 */
+	u8 res21[2];		/* 0x76 - 0x77 */
+	u8 pcr_pcrh;		/* 0x78 */
+	u8 pcr_pcrl;		/* 0x79 */
+} gpio_t;
+
+/* SDRAM controller */
+typedef struct sdram_ctrl {
+	u32 mode;		/* 0x00 Mode/Extended Mode */
+	u32 ctrl;		/* 0x04 Ctrl */
+	u32 cfg1;		/* 0x08 Cfg 1 */
+	u32 cfg2;		/* 0x0C Cfg 2 */
+	u32 res1[64];		/* 0x10 - 0x10F */
+	u32 cs0;		/* 0x110 Chip Select 0 Cfg */
+	u32 cs1;		/* 0x114 Chip Select 1 Cfg */
+} sdram_t;
+
+/* Clock Module */
+typedef struct pll_ctrl {
+	u32 pcr;		/* 0x00 Ctrl */
+	u32 pdr;		/* 0x04 Divider */
+	u32 psr;		/* 0x08 Status */
+} pll_t;
+
+typedef struct rtcex {
+	u32 rsvd1[3];
+	u32 gocu;
+	u32 gocl;
+} rtcex_t;
+#endif				/* __IMMAP_5301X__ */
diff --git a/include/asm-m68k/immap_5329.h b/include/asm-m68k/immap_5329.h
index 7678406..4f255c6 100644
--- a/include/asm-m68k/immap_5329.h
+++ b/include/asm-m68k/immap_5329.h
@@ -70,9 +70,16 @@
 
 #include <asm/coldfire/crossbar.h>
 #include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
+#include <asm/coldfire/qspi.h>
 #include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
 #include <asm/coldfire/lcd.h>
+#include <asm/coldfire/mdha.h>
+#include <asm/coldfire/pwm.h>
 #include <asm/coldfire/ssi.h>
+#include <asm/coldfire/skha.h>
 
 /* System control module registers */
 typedef struct scm1_ctrl {
@@ -83,72 +90,6 @@
 	u32 bmt0;		/*0x54 Bus Monitor Timeout 0 */
 } scm1_t;
 
-/* Message Digest Hardware Accelerator */
-typedef struct mdha_ctrl {
-	u32 mdmr;		/* 0x00 MDHA Mode Register */
-	u32 mdcr;		/* 0x04 Control register */
-	u32 mdcmr;		/* 0x08 Command Register */
-	u32 mdsr;		/* 0x0C Status Register */
-	u32 mdisr;		/* 0x10 Interrupt Status Register */
-	u32 mdimr;		/* 0x14 Interrupt Mask Register */
-	u32 mddsr;		/* 0x1C Data Size Register */
-	u32 mdin;		/* 0x20 Input FIFO */
-	u32 res1[3];		/* 0x24 - 0x2F */
-	u32 mdao;		/* 0x30 Message Digest AO Register */
-	u32 mdbo;		/* 0x34 Message Digest BO Register */
-	u32 mdco;		/* 0x38 Message Digest CO Register */
-	u32 mddo;		/* 0x3C Message Digest DO Register */
-	u32 mdeo;		/* 0x40 Message Digest EO Register */
-	u32 mdmds;		/* 0x44 Message Data Size Register */
-	u32 res[10];		/* 0x48 - 0x6F */
-	u32 mda1;		/* 0x70 Message Digest A1 Register */
-	u32 mdb1;		/* 0x74 Message Digest B1 Register */
-	u32 mdc1;		/* 0x78 Message Digest C1 Register */
-	u32 mdd1;		/* 0x7C Message Digest D1 Register */
-	u32 mde1;		/* 0x80 Message Digest E1 Register */
-} mdha_t;
-
-/* Symmetric Key Hardware Accelerator */
-typedef struct skha_ctrl {
-	u32 mr;			/* 0x00 Mode Register */
-	u32 cr;			/* 0x04 Control Register */
-	u32 cmr;		/* 0x08 Command Register */
-	u32 sr;			/* 0x0C Status Register */
-	u32 esr;		/* 0x10 Error Status Register */
-	u32 emr;		/* 0x14 Error Status Mask Register) */
-	u32 ksr;		/* 0x18 Key Size Register */
-	u32 dsr;		/* 0x1C Data Size Register */
-	u32 in;			/* 0x20 Input FIFO */
-	u32 out;		/* 0x24 Output FIFO */
-	u32 res1[2];		/* 0x28 - 0x2F */
-	u32 kdr1;		/* 0x30 Key Data Register 1  */
-	u32 kdr2;		/* 0x34 Key Data Register 2 */
-	u32 kdr3;		/* 0x38 Key Data Register 3 */
-	u32 kdr4;		/* 0x3C Key Data Register 4 */
-	u32 kdr5;		/* 0x40 Key Data Register 5 */
-	u32 kdr6;		/* 0x44 Key Data Register 6 */
-	u32 res2[10];		/* 0x48 - 0x6F */
-	u32 c1;			/* 0x70 Context 1 */
-	u32 c2;			/* 0x74 Context 2 */
-	u32 c3;			/* 0x78 Context 3 */
-	u32 c4;			/* 0x7C Context 4 */
-	u32 c5;			/* 0x80 Context 5 */
-	u32 c6;			/* 0x84 Context 6 */
-	u32 c7;			/* 0x88 Context 7 */
-	u32 c8;			/* 0x8C Context 8 */
-	u32 c9;			/* 0x90 Context 9 */
-	u32 c10;		/* 0x94 Context 10 */
-	u32 c11;		/* 0x98 Context 11 */
-} skha_t;
-
-/* Random Number Generator */
-typedef struct rng_ctrl {
-	u32 rngcr;		/* 0x00 RNG Control Register */
-	u32 rngsr;		/* 0x04 RNG Status Register */
-	u32 rnger;		/* 0x08 RNG Entropy Register */
-	u32 rngout;		/* 0x0C RNG Output FIFO */
-} rng_t;
-
 /* System control module registers 2 */
 typedef struct scm2_ctrl {
 	u32 mpr1;		/* 0x00 Master Privilege Register */
@@ -165,25 +106,6 @@
 	u32 bmt1;		/* 0x54 Bus Monitor Timeout 1 */
 } scm2_t;
 
-/* FlexCan module registers */
-typedef struct can_ctrl {
-	u32 mcr;		/* 0x00 Module Configuration register */
-	u32 ctrl;		/* 0x04 Control register */
-	u32 timer;		/* 0x08 Free Running Timer */
-	u32 res1;		/* 0x0C */
-	u32 rxgmask;		/* 0x10 Rx Global Mask */
-	u32 rx14mask;		/* 0x14 RxBuffer 14 Mask */
-	u32 rx15mask;		/* 0x18 RxBuffer 15 Mask */
-	u32 errcnt;		/* 0x1C Error Counter Register */
-	u32 errstat;		/* 0x20 Error and status Register */
-	u32 res2;		/* 0x24 */
-	u32 imask;		/* 0x28 Interrupt Mask Register */
-	u32 res3;		/* 0x2C */
-	u32 iflag;		/* 0x30 Interrupt Flag Register */
-	u32 res4[19];		/* 0x34 - 0x7F */
-	u32 MB0_15[2048];	/* 0x80 Message Buffer 0-15 */
-} can_t;
-
 /* System Control Module register 3 */
 typedef struct scm3_ctrl {
 	u8 res1[19];		/* 0x00 - 0x12 */
@@ -206,148 +128,9 @@
 	u32 cfdtr;		/* 0x7C Core Fault Data Register */
 } scm3_t;
 
-/* Interrupt module registers */
-typedef struct int0_ctrl {
-	/* Interrupt Controller 0 */
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 - 0x19 */
-	u16 icfg0;		/* 0x1A Configuration Register */
-	u8 simr0;		/* 0x1C Set Interrupt Mask */
-	u8 cimr0;		/* 0x1D Clear Interrupt Mask */
-	u8 clmask0;		/* 0x1E Current Level Mask */
-	u8 slmask;		/* 0x1F Saved Level Mask */
-	u32 res2[8];		/* 0x20 - 0x3F */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
-
-typedef struct int1_ctrl {
-	/* Interrupt Controller 1 */
-	u32 iprh1;		/* 0x00 Pending Register High */
-	u32 iprl1;		/* 0x04 Pending Register Low */
-	u32 imrh1;		/* 0x08 Mask Register High */
-	u32 imrl1;		/* 0x0C Mask Register Low */
-	u32 frch1;		/* 0x10 Force Register High */
-	u32 frcl1;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 */
-	u16 icfg1;		/* 0x1A Configuration Register */
-	u8 simr1;		/* 0x1C Set Interrupt Mask */
-	u8 cimr1;		/* 0x1D Clear Interrupt Mask */
-	u16 res2;		/* 0x1E - 0x1F */
-	u32 res3[8];		/* 0x20 - 0x3F */
-	u8 icr1[64];		/* 0x40 - 0x7F */
-	u32 res4[24];		/* 0x80 - 0xDF */
-	u8 swiack1;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res5[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack1_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack1_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xE9 - 0xEB */
-	u8 Lniack1_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xED - 0xEF */
-	u8 Lniack1_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack1_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack1_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xF9 - 0xFB */
-	u8 Lniack1_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resc[3];		/* 0xFD - 0xFF */
-} int1_t;
-
-typedef struct intgack_ctrl1 {
-	/* Global IACK Registers */
-	u8 swiack;		/* 0xE0 Global Software Interrupt Acknowledge */
-	u8 Lniack[7];		/* 0xE1 - 0xE7 Global Level 0 Interrupt Acknowledge */
-} intgack_t;
-
-/* QSPI module registers */
-typedef struct qspi_ctrl {
-	u16 qmr;		/* Mode register */
-	u16 res1;
-	u16 qdlyr;		/* Delay register */
-	u16 res2;
-	u16 qwr;		/* Wrap register */
-	u16 res3;
-	u16 qir;		/* Interrupt register */
-	u16 res4;
-	u16 qar;		/* Address register */
-	u16 res5;
-	u16 qdr;		/* Data register */
-	u16 res6;
-} qspi_t;
-
-/* PWM module registers */
-typedef struct pwm_ctrl {
-	u8 en;			/* 0x00 PWM Enable Register */
-	u8 pol;			/* 0x01 Polarity Register */
-	u8 clk;			/* 0x02 Clock Select Register */
-	u8 prclk;		/* 0x03 Prescale Clock Select Register */
-	u8 cae;			/* 0x04 Center Align Enable Register */
-	u8 ctl;			/* 0x05 Control Register */
-	u8 res1[2];		/* 0x06 - 0x07 */
-	u8 scla;		/* 0x08 Scale A register */
-	u8 sclb;		/* 0x09 Scale B register */
-	u8 res2[2];		/* 0x0A - 0x0B */
-	u8 cnt0;		/* 0x0C Channel 0 Counter register */
-	u8 cnt1;		/* 0x0D Channel 1 Counter register */
-	u8 cnt2;		/* 0x0E Channel 2 Counter register */
-	u8 cnt3;		/* 0x0F Channel 3 Counter register */
-	u8 cnt4;		/* 0x10 Channel 4 Counter register */
-	u8 cnt5;		/* 0x11 Channel 5 Counter register */
-	u8 cnt6;		/* 0x12 Channel 6 Counter register */
-	u8 cnt7;		/* 0x13 Channel 7 Counter register */
-	u8 per0;		/* 0x14 Channel 0 Period register */
-	u8 per1;		/* 0x15 Channel 1 Period register */
-	u8 per2;		/* 0x16 Channel 2 Period register */
-	u8 per3;		/* 0x17 Channel 3 Period register */
-	u8 per4;		/* 0x18 Channel 4 Period register */
-	u8 per5;		/* 0x19 Channel 5 Period register */
-	u8 per6;		/* 0x1A Channel 6 Period register */
-	u8 per7;		/* 0x1B Channel 7 Period register */
-	u8 dty0;		/* 0x1C Channel 0 Duty register */
-	u8 dty1;		/* 0x1D Channel 1 Duty register */
-	u8 dty2;		/* 0x1E Channel 2 Duty register */
-	u8 dty3;		/* 0x1F Channel 3 Duty register */
-	u8 dty4;		/* 0x20 Channel 4 Duty register */
-	u8 dty5;		/* 0x21 Channel 5 Duty register */
-	u8 dty6;		/* 0x22 Channel 6 Duty register */
-	u8 dty7;		/* 0x23 Channel 7 Duty register */
-	u8 sdn;			/* 0x24 Shutdown register */
-	u8 res3[3];		/* 0x25 - 0x27 */
-} pwm_t;
-
-/* Edge Port module registers */
-typedef struct eport_ctrl {
-	u16 par;		/* 0x00 Pin Assignment Register */
-	u8 ddar;		/* 0x02 Data Direction Register */
-	u8 ier;			/* 0x03 Interrupt Enable Register */
-	u8 dr;			/* 0x04 Data Register */
-	u8 pdr;			/* 0x05 Pin Data  Register */
-	u8 fr;			/* 0x06 Flag_Register */
-	u8 res1;
-} eport_t;
+typedef struct canex_ctrl {
+	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
+} canex_t;
 
 /* Watchdog registers */
 typedef struct wdog_ctrl {
@@ -593,53 +376,6 @@
 	u32 eptctrl3;		/* 0x1CC Endpoint control 3 */
 } usbotg_t;
 
-/* USB Host module registers */
-typedef struct usb_host {
-	u32 id;			/* 0x000 Identification Register */
-	u32 hwgeneral;		/* 0x004 General HW Parameters */
-	u32 hwhost;		/* 0x008 Host HW Parameters */
-	u32 res1;		/* 0x0C */
-	u32 hwtxbuf;		/* 0x010 TX Buffer HW Parameters */
-	u32 hwrxbuf;		/* 0x014 RX Buffer HW Parameters */
-	u32 res2[58];		/* 0x18 - 0xFF */
-
-	/* Host Controller Capability Register */
-	u8 caplength;		/* 0x100 Capability Register Length */
-	u8 res3;		/* 0x101 */
-	u16 hciver;		/* 0x102 Host Interface Version Number */
-	u32 hcsparams;		/* 0x104 Host Structural Parameters */
-	u32 hccparams;		/* 0x108 Host Capability Parameters */
-	u32 res4[13];		/* 0x10C - 0x13F */
-
-	/* Host Controller Operational Register */
-	u32 cmd;		/* 0x140 USB Command */
-	u32 sts;		/* 0x144 USB Status */
-	u32 intr;		/* 0x148 USB Interrupt Enable */
-	u32 frindex;		/* 0x14C USB Frame Index */
-	u32 res5;		/* 0x150 (ctrl segment register in EHCI spec) */
-	u32 prdlst;		/* 0x154 Periodic Frame List Base Address */
-	u32 aynclst;		/* 0x158 Current Asynchronous List Address */
-	u32 ttctrl;		/* 0x15C Host TT Asynchronous Buffer Control (non-ehci) */
-	u32 burstsize;		/* 0x160 Master Interface Data Burst Size (non-ehci) */
-	u32 txfill;		/* 0x164 Host Transmit FIFO Tuning Control  (non-ehci) */
-	u32 res6[6];		/* 0x168 - 0x17F */
-	u32 cfgflag;		/* 0x180 Configure Flag Register */
-	u32 portsc1;		/* 0x184 Port Status/Control */
-	u32 res7[8];		/* 0x188 - 0x1A7 */
-
-	/* non-ehci registers */
-	u32 mode;		/* 0x1A8 USB mode register */
-	u32 eptsetstat;		/* 0x1AC Endpoint Setup status */
-	u32 eptprime;		/* 0x1B0 Endpoint initialization */
-	u32 eptflush;		/* 0x1B4 Endpoint de-initialize */
-	u32 eptstat;		/* 0x1B8 Endpoint status */
-	u32 eptcomplete;	/* 0x1BC Endpoint Complete */
-	u32 eptctrl0;		/* 0x1C0 Endpoint control 0 */
-	u32 eptctrl1;		/* 0x1C4 Endpoint control 1 */
-	u32 eptctrl2;		/* 0x1C8 Endpoint control 2 */
-	u32 eptctrl3;		/* 0x1CC Endpoint control 3 */
-} usbhost_t;
-
 /* SDRAM controller registers */
 typedef struct sdram_ctrl {
 	u32 mode;		/* 0x00 Mode/Extended Mode register */
diff --git a/include/asm-m68k/immap_5445x.h b/include/asm-m68k/immap_5445x.h
index ef8930e..57cf3ec 100644
--- a/include/asm-m68k/immap_5445x.h
+++ b/include/asm-m68k/immap_5445x.h
@@ -69,161 +69,15 @@
 #define MMAP_USBEHCI	0xFC0B0140
 #define MMAP_USBOTG	0xFC0B01A0
 
+#include <asm/coldfire/ata.h>
 #include <asm/coldfire/crossbar.h>
 #include <asm/coldfire/dspi.h>
 #include <asm/coldfire/edma.h>
+#include <asm/coldfire/eport.h>
 #include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/intctrl.h>
 #include <asm/coldfire/ssi.h>
 
-/* ATA */
-typedef struct atac {
-	/* PIO */
-	u8 toff;		/* 0x00 */
-	u8 ton;			/* 0x01 */
-	u8 t1;			/* 0x02 */
-	u8 t2w;			/* 0x03 */
-	u8 t2r;			/* 0x04 */
-	u8 ta;			/* 0x05 */
-	u8 trd;			/* 0x06 */
-	u8 t4;			/* 0x07 */
-	u8 t9;			/* 0x08 */
-
-	/* DMA */
-	u8 tm;			/* 0x09 */
-	u8 tn;			/* 0x0A */
-	u8 td;			/* 0x0B */
-	u8 tk;			/* 0x0C */
-	u8 tack;		/* 0x0D */
-	u8 tenv;		/* 0x0E */
-	u8 trp;			/* 0x0F */
-	u8 tzah;		/* 0x10 */
-	u8 tmli;		/* 0x11 */
-	u8 tdvh;		/* 0x12 */
-	u8 tdzfs;		/* 0x13 */
-	u8 tdvs;		/* 0x14 */
-	u8 tcvh;		/* 0x15 */
-	u8 tss;			/* 0x16 */
-	u8 tcyc;		/* 0x17 */
-
-	/* FIFO */
-	u32 fifo32;		/* 0x18 */
-	u16 fifo16;		/* 0x1C */
-	u8 rsvd0[2];
-	u8 ffill;		/* 0x20 */
-	u8 rsvd1[3];
-
-	/* ATA */
-	u8 cr;			/* 0x24 */
-	u8 rsvd2[3];
-	u8 isr;			/* 0x28 */
-	u8 rsvd3[3];
-	u8 ier;			/* 0x2C */
-	u8 rsvd4[3];
-	u8 icr;			/* 0x30 */
-	u8 rsvd5[3];
-	u8 falarm;		/* 0x34 */
-	u8 rsvd6[106];
-} atac_t;
-
-/* Interrupt Controller (INTC) */
-typedef struct int0_ctrl {
-	u32 iprh0;		/* 0x00 Pending Register High */
-	u32 iprl0;		/* 0x04 Pending Register Low */
-	u32 imrh0;		/* 0x08 Mask Register High */
-	u32 imrl0;		/* 0x0C Mask Register Low */
-	u32 frch0;		/* 0x10 Force Register High */
-	u32 frcl0;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 - 0x19 */
-	u16 icfg0;		/* 0x1A Configuration Register */
-	u8 simr0;		/* 0x1C Set Interrupt Mask */
-	u8 cimr0;		/* 0x1D Clear Interrupt Mask */
-	u8 clmask0;		/* 0x1E Current Level Mask */
-	u8 slmask;		/* 0x1F Saved Level Mask */
-	u32 res2[8];		/* 0x20 - 0x3F */
-	u8 icr0[64];		/* 0x40 - 0x7F Control registers */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
-
-typedef struct int1_ctrl {
-	/* Interrupt Controller 1 */
-	u32 iprh1;		/* 0x00 Pending Register High */
-	u32 iprl1;		/* 0x04 Pending Register Low */
-	u32 imrh1;		/* 0x08 Mask Register High */
-	u32 imrl1;		/* 0x0C Mask Register Low */
-	u32 frch1;		/* 0x10 Force Register High */
-	u32 frcl1;		/* 0x14 Force Register Low */
-	u16 res1;		/* 0x18 */
-	u16 icfg1;		/* 0x1A Configuration Register */
-	u8 simr1;		/* 0x1C Set Interrupt Mask */
-	u8 cimr1;		/* 0x1D Clear Interrupt Mask */
-	u16 res2;		/* 0x1E - 0x1F */
-	u32 res3[8];		/* 0x20 - 0x3F */
-	u8 icr1[64];		/* 0x40 - 0x7F */
-	u32 res4[24];		/* 0x80 - 0xDF */
-	u8 swiack1;		/* 0xE0 Software Interrupt Acknowledge */
-	u8 res5[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack1_1;		/* 0xE4 Level n interrupt acknowledge resister */
-	u8 res6[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack1_2;		/* 0xE8 Level n interrupt acknowledge resister */
-	u8 res7[3];		/* 0xE9 - 0xEB */
-	u8 Lniack1_3;		/* 0xEC Level n interrupt acknowledge resister */
-	u8 res8[3];		/* 0xED - 0xEF */
-	u8 Lniack1_4;		/* 0xF0 Level n interrupt acknowledge resister */
-	u8 res9[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack1_5;		/* 0xF4 Level n interrupt acknowledge resister */
-	u8 resa[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack1_6;		/* 0xF8 Level n interrupt acknowledge resister */
-	u8 resb[3];		/* 0xF9 - 0xFB */
-	u8 Lniack1_7;		/* 0xFC Level n interrupt acknowledge resister */
-	u8 resc[3];		/* 0xFD - 0xFF */
-} int1_t;
-
-/* Global Interrupt Acknowledge (IACK) */
-typedef struct iack {
-	u8 resv0[0xE0];
-	u8 gswiack;
-	u8 resv1[0x3];
-	u8 gl1iack;
-	u8 resv2[0x3];
-	u8 gl2iack;
-	u8 resv3[0x3];
-	u8 gl3iack;
-	u8 resv4[0x3];
-	u8 gl4iack;
-	u8 resv5[0x3];
-	u8 gl5iack;
-	u8 resv6[0x3];
-	u8 gl6iack;
-	u8 resv7[0x3];
-	u8 gl7iack;
-} iack_t;
-
-/* Edge Port Module (EPORT) */
-typedef struct eport {
-	u16 eppar;
-	u8 epddr;
-	u8 epier;
-	u8 epdr;
-	u8 eppdr;
-	u8 epfr;
-} eport_t;
-
 /* Watchdog Timer Modules (WTM) */
 typedef struct wtm {
 	u16 wcr;
@@ -387,14 +241,6 @@
 	u8 dscr_ata;		/* ATA Drive Strength Control Register */
 } gpio_t;
 
-/* Random Number Generator (RNG) */
-typedef struct rng {
-	u32 rngcr;
-	u32 rngsr;
-	u32 rnger;
-	u32 rngout;
-} rng_t;
-
 /* SDRAM Controller (SDRAMC) */
 typedef struct sdramc {
 	u32 sdmr;		/* SDRAM Mode/Extended Mode Register */
diff --git a/include/asm-m68k/immap_547x_8x.h b/include/asm-m68k/immap_547x_8x.h
index c221936..50f8b05d98 100644
--- a/include/asm-m68k/immap_547x_8x.h
+++ b/include/asm-m68k/immap_547x_8x.h
@@ -57,7 +57,11 @@
 #define MMAP_SRAMCFG	(CONFIG_SYS_MBAR + 0x0001FF00)
 #define MMAP_SEC	(CONFIG_SYS_MBAR + 0x00020000)
 
+#include <asm/coldfire/dspi.h>
+#include <asm/coldfire/eport.h>
 #include <asm/coldfire/flexbus.h>
+#include <asm/coldfire/flexcan.h>
+#include <asm/coldfire/intctrl.h>
 
 typedef struct siu {
 	u32 mbar;		/* 0x00 */
@@ -98,37 +102,6 @@
 	u32 pri;		/* 0x268 */
 } xlbarb_t;
 
-typedef struct int0_ctrl {
-	u32 iprh0;		/* 0x00 */
-	u32 iprl0;		/* 0x04 */
-	u32 imrh0;		/* 0x08 */
-	u32 imrl0;		/* 0x0C */
-	u32 frch0;		/* 0x10 */
-	u32 frcl0;		/* 0x14 */
-	u8 irlr;		/* 0x18 */
-	u8 iacklpr;		/* 0x19 */
-	u16 res1;		/* 0x1A - 0x1B */
-	u32 res2[9];		/* 0x1C - 0x3F */
-	u8 icr0[64];		/* 0x40 - 0x7F */
-	u32 res3[24];		/* 0x80 - 0xDF */
-	u8 swiack0;		/* 0xE0 */
-	u8 res4[3];		/* 0xE1 - 0xE3 */
-	u8 Lniack0_1;		/* 0xE4 */
-	u8 res5[3];		/* 0xE5 - 0xE7 */
-	u8 Lniack0_2;		/* 0xE8 */
-	u8 res6[3];		/* 0xE9 - 0xEB */
-	u8 Lniack0_3;		/* 0xEC */
-	u8 res7[3];		/* 0xED - 0xEF */
-	u8 Lniack0_4;		/* 0xF0 */
-	u8 res8[3];		/* 0xF1 - 0xF3 */
-	u8 Lniack0_5;		/* 0xF4 */
-	u8 res9[3];		/* 0xF5 - 0xF7 */
-	u8 Lniack0_6;		/* 0xF8 */
-	u8 resa[3];		/* 0xF9 - 0xFB */
-	u8 Lniack0_7;		/* 0xFC */
-	u8 resb[3];		/* 0xFD - 0xFF */
-} int0_t;
-
 typedef struct gptmr {
 	u8 ocpw;
 	u8 octict;
@@ -147,6 +120,11 @@
 	u8 intr;		/* Interrupts */
 } gptmr_t;
 
+typedef struct canex_ctrl {
+	can_msg_t msg[16];	/* 0x00 Message Buffer 0-15 */
+} canex_t;
+
+
 typedef struct slt {
 	u32 tcnt;		/* 0x00 */
 	u32 cr;			/* 0x04 */
diff --git a/include/asm-m68k/m5227x.h b/include/asm-m68k/m5227x.h
index afd31ba..824d333 100644
--- a/include/asm-m68k/m5227x.h
+++ b/include/asm-m68k/m5227x.h
@@ -26,9 +26,7 @@
 #ifndef __MCF5227X__
 #define __MCF5227X__
 
-/*********************************************************************
-* Interrupt Controller (INTC)
-*********************************************************************/
+/* Interrupt Controller (INTC) */
 #define INT0_LO_RSVD0			(0)
 #define INT0_LO_EPORT1			(1)
 #define INT0_LO_EPORT4			(4)
@@ -98,235 +96,6 @@
 #define INT1_HI_TOUCH_ADC		(61)
 #define INT1_HI_PLL_LOCKS		(62)
 
-/* Bit definitions and macros for IPRH */
-#define INTC_IPRH_INT32			(0x00000001)
-#define INTC_IPRH_INT33			(0x00000002)
-#define INTC_IPRH_INT34			(0x00000004)
-#define INTC_IPRH_INT35			(0x00000008)
-#define INTC_IPRH_INT36			(0x00000010)
-#define INTC_IPRH_INT37			(0x00000020)
-#define INTC_IPRH_INT38			(0x00000040)
-#define INTC_IPRH_INT39			(0x00000080)
-#define INTC_IPRH_INT40			(0x00000100)
-#define INTC_IPRH_INT41			(0x00000200)
-#define INTC_IPRH_INT42			(0x00000400)
-#define INTC_IPRH_INT43			(0x00000800)
-#define INTC_IPRH_INT44			(0x00001000)
-#define INTC_IPRH_INT45			(0x00002000)
-#define INTC_IPRH_INT46			(0x00004000)
-#define INTC_IPRH_INT47			(0x00008000)
-#define INTC_IPRH_INT48			(0x00010000)
-#define INTC_IPRH_INT49			(0x00020000)
-#define INTC_IPRH_INT50			(0x00040000)
-#define INTC_IPRH_INT51			(0x00080000)
-#define INTC_IPRH_INT52			(0x00100000)
-#define INTC_IPRH_INT53			(0x00200000)
-#define INTC_IPRH_INT54			(0x00400000)
-#define INTC_IPRH_INT55			(0x00800000)
-#define INTC_IPRH_INT56			(0x01000000)
-#define INTC_IPRH_INT57			(0x02000000)
-#define INTC_IPRH_INT58			(0x04000000)
-#define INTC_IPRH_INT59			(0x08000000)
-#define INTC_IPRH_INT60			(0x10000000)
-#define INTC_IPRH_INT61			(0x20000000)
-#define INTC_IPRH_INT62			(0x40000000)
-#define INTC_IPRH_INT63			(0x80000000)
-
-/* Bit definitions and macros for IPRL */
-#define INTC_IPRL_INT0			(0x00000001)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT31			(0x80000000)
-
-/* Bit definitions and macros for IMRH */
-#define INTC_IMRH_INT_MASK32		(0x00000001)
-#define INTC_IMRH_INT_MASK33		(0x00000002)
-#define INTC_IMRH_INT_MASK34		(0x00000004)
-#define INTC_IMRH_INT_MASK35		(0x00000008)
-#define INTC_IMRH_INT_MASK36		(0x00000010)
-#define INTC_IMRH_INT_MASK37		(0x00000020)
-#define INTC_IMRH_INT_MASK38		(0x00000040)
-#define INTC_IMRH_INT_MASK39		(0x00000080)
-#define INTC_IMRH_INT_MASK40		(0x00000100)
-#define INTC_IMRH_INT_MASK41		(0x00000200)
-#define INTC_IMRH_INT_MASK42		(0x00000400)
-#define INTC_IMRH_INT_MASK43		(0x00000800)
-#define INTC_IMRH_INT_MASK44		(0x00001000)
-#define INTC_IMRH_INT_MASK45		(0x00002000)
-#define INTC_IMRH_INT_MASK46		(0x00004000)
-#define INTC_IMRH_INT_MASK47		(0x00008000)
-#define INTC_IMRH_INT_MASK48		(0x00010000)
-#define INTC_IMRH_INT_MASK49		(0x00020000)
-#define INTC_IMRH_INT_MASK50		(0x00040000)
-#define INTC_IMRH_INT_MASK51		(0x00080000)
-#define INTC_IMRH_INT_MASK52		(0x00100000)
-#define INTC_IMRH_INT_MASK53		(0x00200000)
-#define INTC_IMRH_INT_MASK54		(0x00400000)
-#define INTC_IMRH_INT_MASK55		(0x00800000)
-#define INTC_IMRH_INT_MASK56		(0x01000000)
-#define INTC_IMRH_INT_MASK57		(0x02000000)
-#define INTC_IMRH_INT_MASK58		(0x04000000)
-#define INTC_IMRH_INT_MASK59		(0x08000000)
-#define INTC_IMRH_INT_MASK60		(0x10000000)
-#define INTC_IMRH_INT_MASK61		(0x20000000)
-#define INTC_IMRH_INT_MASK62		(0x40000000)
-#define INTC_IMRH_INT_MASK63		(0x80000000)
-
-/* Bit definitions and macros for IMRL */
-#define INTC_IMRL_INT_MASK0		(0x00000001)
-#define INTC_IMRL_INT_MASK1		(0x00000002)
-#define INTC_IMRL_INT_MASK2		(0x00000004)
-#define INTC_IMRL_INT_MASK3		(0x00000008)
-#define INTC_IMRL_INT_MASK4		(0x00000010)
-#define INTC_IMRL_INT_MASK5		(0x00000020)
-#define INTC_IMRL_INT_MASK6		(0x00000040)
-#define INTC_IMRL_INT_MASK7		(0x00000080)
-#define INTC_IMRL_INT_MASK8		(0x00000100)
-#define INTC_IMRL_INT_MASK9		(0x00000200)
-#define INTC_IMRL_INT_MASK10		(0x00000400)
-#define INTC_IMRL_INT_MASK11		(0x00000800)
-#define INTC_IMRL_INT_MASK12		(0x00001000)
-#define INTC_IMRL_INT_MASK13		(0x00002000)
-#define INTC_IMRL_INT_MASK14		(0x00004000)
-#define INTC_IMRL_INT_MASK15		(0x00008000)
-#define INTC_IMRL_INT_MASK16		(0x00010000)
-#define INTC_IMRL_INT_MASK17		(0x00020000)
-#define INTC_IMRL_INT_MASK18		(0x00040000)
-#define INTC_IMRL_INT_MASK19		(0x00080000)
-#define INTC_IMRL_INT_MASK20		(0x00100000)
-#define INTC_IMRL_INT_MASK21		(0x00200000)
-#define INTC_IMRL_INT_MASK22		(0x00400000)
-#define INTC_IMRL_INT_MASK23		(0x00800000)
-#define INTC_IMRL_INT_MASK24		(0x01000000)
-#define INTC_IMRL_INT_MASK25		(0x02000000)
-#define INTC_IMRL_INT_MASK26		(0x04000000)
-#define INTC_IMRL_INT_MASK27		(0x08000000)
-#define INTC_IMRL_INT_MASK28		(0x10000000)
-#define INTC_IMRL_INT_MASK29		(0x20000000)
-#define INTC_IMRL_INT_MASK30		(0x40000000)
-#define INTC_IMRL_INT_MASK31		(0x80000000)
-
-/* Bit definitions and macros for INTFRCH */
-#define INTC_INTFRCH_INTFRC32		(0x00000001)
-#define INTC_INTFRCH_INTFRC33		(0x00000002)
-#define INTC_INTFRCH_INTFRC34		(0x00000004)
-#define INTC_INTFRCH_INTFRC35		(0x00000008)
-#define INTC_INTFRCH_INTFRC36		(0x00000010)
-#define INTC_INTFRCH_INTFRC37		(0x00000020)
-#define INTC_INTFRCH_INTFRC38		(0x00000040)
-#define INTC_INTFRCH_INTFRC39		(0x00000080)
-#define INTC_INTFRCH_INTFRC40		(0x00000100)
-#define INTC_INTFRCH_INTFRC41		(0x00000200)
-#define INTC_INTFRCH_INTFRC42		(0x00000400)
-#define INTC_INTFRCH_INTFRC43		(0x00000800)
-#define INTC_INTFRCH_INTFRC44		(0x00001000)
-#define INTC_INTFRCH_INTFRC45		(0x00002000)
-#define INTC_INTFRCH_INTFRC46		(0x00004000)
-#define INTC_INTFRCH_INTFRC47		(0x00008000)
-#define INTC_INTFRCH_INTFRC48		(0x00010000)
-#define INTC_INTFRCH_INTFRC49		(0x00020000)
-#define INTC_INTFRCH_INTFRC50		(0x00040000)
-#define INTC_INTFRCH_INTFRC51		(0x00080000)
-#define INTC_INTFRCH_INTFRC52		(0x00100000)
-#define INTC_INTFRCH_INTFRC53		(0x00200000)
-#define INTC_INTFRCH_INTFRC54		(0x00400000)
-#define INTC_INTFRCH_INTFRC55		(0x00800000)
-#define INTC_INTFRCH_INTFRC56		(0x01000000)
-#define INTC_INTFRCH_INTFRC57		(0x02000000)
-#define INTC_INTFRCH_INTFRC58		(0x04000000)
-#define INTC_INTFRCH_INTFRC59		(0x08000000)
-#define INTC_INTFRCH_INTFRC60		(0x10000000)
-#define INTC_INTFRCH_INTFRC61		(0x20000000)
-#define INTC_INTFRCH_INTFRC62		(0x40000000)
-#define INTC_INTFRCH_INTFRC63		(0x80000000)
-
-/* Bit definitions and macros for INTFRCL */
-#define INTC_INTFRCL_INTFRC0		(0x00000001)
-#define INTC_INTFRCL_INTFRC1		(0x00000002)
-#define INTC_INTFRCL_INTFRC2		(0x00000004)
-#define INTC_INTFRCL_INTFRC3		(0x00000008)
-#define INTC_INTFRCL_INTFRC4		(0x00000010)
-#define INTC_INTFRCL_INTFRC5		(0x00000020)
-#define INTC_INTFRCL_INTFRC6		(0x00000040)
-#define INTC_INTFRCL_INTFRC7		(0x00000080)
-#define INTC_INTFRCL_INTFRC8		(0x00000100)
-#define INTC_INTFRCL_INTFRC9		(0x00000200)
-#define INTC_INTFRCL_INTFRC10		(0x00000400)
-#define INTC_INTFRCL_INTFRC11		(0x00000800)
-#define INTC_INTFRCL_INTFRC12		(0x00001000)
-#define INTC_INTFRCL_INTFRC13		(0x00002000)
-#define INTC_INTFRCL_INTFRC14		(0x00004000)
-#define INTC_INTFRCL_INTFRC15		(0x00008000)
-#define INTC_INTFRCL_INTFRC16		(0x00010000)
-#define INTC_INTFRCL_INTFRC17		(0x00020000)
-#define INTC_INTFRCL_INTFRC18		(0x00040000)
-#define INTC_INTFRCL_INTFRC19		(0x00080000)
-#define INTC_INTFRCL_INTFRC20		(0x00100000)
-#define INTC_INTFRCL_INTFRC21		(0x00200000)
-#define INTC_INTFRCL_INTFRC22		(0x00400000)
-#define INTC_INTFRCL_INTFRC23		(0x00800000)
-#define INTC_INTFRCL_INTFRC24		(0x01000000)
-#define INTC_INTFRCL_INTFRC25		(0x02000000)
-#define INTC_INTFRCL_INTFRC26		(0x04000000)
-#define INTC_INTFRCL_INTFRC27		(0x08000000)
-#define INTC_INTFRCL_INTFRC28		(0x10000000)
-#define INTC_INTFRCL_INTFRC29		(0x20000000)
-#define INTC_INTFRCL_INTFRC30		(0x40000000)
-#define INTC_INTFRCL_INTFRC31		(0x80000000)
-
-/* Bit definitions and macros for ICONFIG */
-#define INTC_ICONFIG_EMASK		(0x0020)
-#define INTC_ICONFIG_ELVLPRI1		(0x0200)
-#define INTC_ICONFIG_ELVLPRI2		(0x0400)
-#define INTC_ICONFIG_ELVLPRI3		(0x0800)
-#define INTC_ICONFIG_ELVLPRI4		(0x1000)
-#define INTC_ICONFIG_ELVLPRI5		(0x2000)
-#define INTC_ICONFIG_ELVLPRI6		(0x4000)
-#define INTC_ICONFIG_ELVLPRI7		(0x8000)
-
-/* Bit definitions and macros for SIMR */
-#define INTC_SIMR_SIMR(x)		(((x)&0x7F))
-
-/* Bit definitions and macros for CIMR */
-#define INTC_CIMR_CIMR(x)		(((x)&0x7F))
-
-/* Bit definitions and macros for CLMASK */
-#define INTC_CLMASK_CLMASK(x)		(((x)&0x0F))
-
-/* Bit definitions and macros for SLMASK */
-#define INTC_SLMASK_SLMASK(x)		(((x)&0x0F))
-
-/* Bit definitions and macros for ICR group */
-#define INTC_ICR_IL(x)			(((x)&0x07))
-
 /*********************************************************************
 * Reset Controller Module (RCM)
 *********************************************************************/
@@ -513,8 +282,8 @@
 
 /* Bit definitions and macros for PAR_DSPI */
 #define GPIO_PAR_DSPI_PCS0_MASK		(0x3F)
-#define GPIO_PAR_DSPI_PCS0_PCS0		(0x80)
-#define GPIO_PAR_DSPI_PCS0_U2RTS	(0x40)
+#define GPIO_PAR_DSPI_PCS0_PCS0		(0xC0)
+#define GPIO_PAR_DSPI_PCS0_U2RTS	(0x80)
 #define GPIO_PAR_DSPI_PCS0_GPIO		(0x00)
 #define GPIO_PAR_DSPI_SIN_MASK		(0xCF)
 #define GPIO_PAR_DSPI_SIN_SIN		(0x30)
diff --git a/include/asm-m68k/m5235.h b/include/asm-m68k/m5235.h
index b98b452..22987ac 100644
--- a/include/asm-m68k/m5235.h
+++ b/include/asm-m68k/m5235.h
@@ -163,94 +163,6 @@
 #define SDRAMC_DMRn_V			(0x00000001)
 
 /*********************************************************************
-* FlexBus Chip Selects (FBCS)
-*********************************************************************/
-/* Bit definitions and macros for FBCS_CSMR */
-#define FBCS_CSMR_BAM(x)		(((x)&0xFFFF)<<16)
-#define FBCS_CSMR_BAM_4G		(0xFFFF0000)
-#define FBCS_CSMR_BAM_2G		(0x7FFF0000)
-#define FBCS_CSMR_BAM_1G		(0x3FFF0000)
-#define FBCS_CSMR_BAM_1024M		(0x3FFF0000)
-#define FBCS_CSMR_BAM_512M		(0x1FFF0000)
-#define FBCS_CSMR_BAM_256M		(0x0FFF0000)
-#define FBCS_CSMR_BAM_128M		(0x07FF0000)
-#define FBCS_CSMR_BAM_64M		(0x03FF0000)
-#define FBCS_CSMR_BAM_32M		(0x01FF0000)
-#define FBCS_CSMR_BAM_16M		(0x00FF0000)
-#define FBCS_CSMR_BAM_8M		(0x007F0000)
-#define FBCS_CSMR_BAM_4M		(0x003F0000)
-#define FBCS_CSMR_BAM_2M		(0x001F0000)
-#define FBCS_CSMR_BAM_1M		(0x000F0000)
-#define FBCS_CSMR_BAM_1024K		(0x000F0000)
-#define FBCS_CSMR_BAM_512K		(0x00070000)
-#define FBCS_CSMR_BAM_256K		(0x00030000)
-#define FBCS_CSMR_BAM_128K		(0x00010000)
-#define FBCS_CSMR_BAM_64K		(0x00000000)
-#define FBCS_CSMR_WP			(0x00000100)
-#define FBCS_CSMR_V			(0x00000001)
-
-/* Bit definitions and macros for FBCS_CSCR */
-#define FBCS_CSCR_SRWS(x)		(((x)&0x03)<<14)
-#define FBCS_CSCR_IWS(x)		(((x)&0x0F)<<10)
-#define FBCS_CSCR_AA			(0x0100)
-#define FBCS_CSCR_PS_MASK		(0x00C0)
-#define FBCS_CSCR_PS_32			(0x0000)
-#define FBCS_CSCR_PS_16			(0x0080)
-#define FBCS_CSCR_PS_8			(0x0040)
-#define FBCS_CSCR_BEM			(0x0020)
-#define FBCS_CSCR_BSTR			(0x0010)
-#define FBCS_CSCR_BSTW			(0x0008)
-#define FBCS_CSCR_SWWS(x)		((x)&0x07)
-
-/*********************************************************************
-* Queued Serial Peripheral Interface (QSPI)
-*********************************************************************/
-/* Bit definitions and macros for QSPI_QMR */
-#define QSPI_QMR_MSTR			(0x8000)
-#define QSPI_QMR_DOHIE			(0x4000)
-#define QSPI_QMR_BITS(x)		(((x)&0x000F)<<10)
-#define QSPI_QMR_CPOL			(0x0200)
-#define QSPI_QMR_CPHA			(0x0100)
-#define QSPI_QMR_BAUD(x)		((x)&0x00FF)
-
-/* Bit definitions and macros for QSPI_QDLYR */
-#define QSPI_QDLYR_SPE			(0x8000)
-#define QSPI_QDLYR_QCD(x)		(((x)&0x007F)<<8)
-#define QSPI_QDLYR_DTL(x)		((x)&0x00FF)
-
-/* Bit definitions and macros for QSPI_QWR */
-#define QSPI_QWR_HALT			(0x8000)
-#define QSPI_QWR_WREN			(0x4000)
-#define QSPI_QWR_WRTO			(0x2000)
-#define QSPI_QWR_CSIV			(0x1000)
-#define QSPI_QWR_ENDQP(x)		(((x)&0x000F)<<8)
-#define QSPI_QWR_NEWQP(x)		((x)&0x000F)
-
-/* Bit definitions and macros for QSPI_QIR */
-#define QSPI_QIR_WCEFB			(0x8000)
-#define QSPI_QIR_ABRTB			(0x4000)
-#define QSPI_QIR_ABRTL			(0x1000)
-#define QSPI_QIR_WCEFE			(0x0800)
-#define QSPI_QIR_ABRTE			(0x0400)
-#define QSPI_QIR_SPIFE			(0x0100)
-#define QSPI_QIR_WCEF			(0x0008)
-#define QSPI_QIR_ABRT			(0x0004)
-#define QSPI_QIR_SPIF			(0x0001)
-
-/* Bit definitions and macros for QSPI_QAR */
-#define QSPI_QAR_ADDR(x)		((x)&0x003F)
-
-/* Bit definitions and macros for QSPI_QDR */
-#define QSPI_QDR_CONT			(0x8000)
-#define QSPI_QDR_BITSE			(0x4000)
-#define QSPI_QDR_DT			(0x2000)
-#define QSPI_QDR_DSCK			(0x1000)
-#define QSPI_QDR_QSPI_CS3		(0x0800)
-#define QSPI_QDR_QSPI_CS2		(0x0400)
-#define QSPI_QDR_QSPI_CS1		(0x0200)
-#define QSPI_QDR_QSPI_CS0		(0x0100)
-
-/*********************************************************************
 * Interrupt Controller (INTC)
 *********************************************************************/
 #define INT0_LO_RSVD0			(0)
@@ -370,85 +282,6 @@
 #define INT1_HI_ETPU_TC31F		(58)
 #define INT1_HI_ETPU_TGIF		(59)
 
-/* Bit definitions and macros for INTC_IPRH */
-#define INTC_IPRH_INT63			(0x80000000)
-#define INTC_IPRH_INT62			(0x40000000)
-#define INTC_IPRH_INT61			(0x20000000)
-#define INTC_IPRH_INT60			(0x10000000)
-#define INTC_IPRH_INT59			(0x08000000)
-#define INTC_IPRH_INT58			(0x04000000)
-#define INTC_IPRH_INT57			(0x02000000)
-#define INTC_IPRH_INT56			(0x01000000)
-#define INTC_IPRH_INT55			(0x00800000)
-#define INTC_IPRH_INT54			(0x00400000)
-#define INTC_IPRH_INT53			(0x00200000)
-#define INTC_IPRH_INT52			(0x00100000)
-#define INTC_IPRH_INT51			(0x00080000)
-#define INTC_IPRH_INT50			(0x00040000)
-#define INTC_IPRH_INT49			(0x00020000)
-#define INTC_IPRH_INT48			(0x00010000)
-#define INTC_IPRH_INT47			(0x00008000)
-#define INTC_IPRH_INT46			(0x00004000)
-#define INTC_IPRH_INT45			(0x00002000)
-#define INTC_IPRH_INT44			(0x00001000)
-#define INTC_IPRH_INT43			(0x00000800)
-#define INTC_IPRH_INT42			(0x00000400)
-#define INTC_IPRH_INT41			(0x00000200)
-#define INTC_IPRH_INT40			(0x00000100)
-#define INTC_IPRH_INT39			(0x00000080)
-#define INTC_IPRH_INT38			(0x00000040)
-#define INTC_IPRH_INT37			(0x00000020)
-#define INTC_IPRH_INT36			(0x00000010)
-#define INTC_IPRH_INT35			(0x00000008)
-#define INTC_IPRH_INT34			(0x00000004)
-#define INTC_IPRH_INT33			(0x00000002)
-#define INTC_IPRH_INT32			(0x00000001)
-
-/* Bit definitions and macros for INTC_IPRL */
-#define INTC_IPRL_INT31			(0x80000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT0			(0x00000001)
-
-/* Bit definitions and macros for INTC_IRLR */
-#define INTC_IRLRn(x)			(((x)&0x7F)<<1)
-
-/* Bit definitions and macros for INTC_IACKLPRn */
-#define INTC_IACKLPRn_LEVEL(x)		(((x)&0x07)<<4)
-#define INTC_IACKLPRn_PRI(x)		((x)&0x0F)
-
-/* Bit definitions and macros for INTC_ICRnx */
-#define INTC_ICRnx_IL(x)		(((x)&0x07)<<3)
-#define INTC_ICRnx_IP(x)		((x)&0x07)
-
 /*********************************************************************
 * General Purpose I/O (GPIO)
 *********************************************************************/
@@ -758,49 +591,6 @@
 #define PLL_SYNSR_CALPASS		(0x00000001)
 
 /*********************************************************************
- * Edge Port
-*********************************************************************/
-#define EPORT_EPPAR_EPPA7(x)		(((x)&0x03)<<14)
-#define EPORT_EPPAR_EPPA6(x)		(((x)&0x03)<<12)
-#define EPORT_EPPAR_EPPA5(x)		(((x)&0x03)<<10)
-#define EPORT_EPPAR_EPPA4(x)		(((x)&0x03)<<8)
-#define EPORT_EPPAR_EPPA3(x)		(((x)&0x03)<<6)
-#define EPORT_EPPAR_EPPA2(x)		(((x)&0x03)<<4)
-#define EPORT_EPPAR_EPPA1(x)		(((x)&0x03)<<2)
-
-#define EPORT_EPDDR_EPDD7(x)		EPORT_EPPAR_EPPA7(x)
-#define EPORT_EPDDR_EPDD6(x)		EPORT_EPPAR_EPPA6(x)
-#define EPORT_EPDDR_EPDD5(x)		EPORT_EPPAR_EPPA5(x)
-#define EPORT_EPDDR_EPDD4(x)		EPORT_EPPAR_EPPA4(x)
-#define EPORT_EPDDR_EPDD3(x)		EPORT_EPPAR_EPPA3(x)
-#define EPORT_EPDDR_EPDD2(x)		EPORT_EPPAR_EPPA2(x)
-#define EPORT_EPDDR_EPDD1(x)		EPORT_EPPAR_EPPA1(x)
-
-#define EPORT_EPIER_EPIE7		(0x80)
-#define EPORT_EPIER_EPIE6		(0x40)
-#define EPORT_EPIER_EPIE5		(0x20)
-#define EPORT_EPIER_EPIE4		(0x10)
-#define EPORT_EPIER_EPIE3		(0x08)
-#define EPORT_EPIER_EPIE2		(0x04)
-#define EPORT_EPIER_EPIE1		(0x02)
-
-#define EPORT_EPDR_EPDR7		EPORT_EPIER_EPIE7
-#define EPORT_EPDR_EPDR6		EPORT_EPIER_EPIE6
-#define EPORT_EPDR_EPDR5		EPORT_EPIER_EPIE5
-#define EPORT_EPDR_EPDR4		EPORT_EPIER_EPIE4
-#define EPORT_EPDR_EPDR3		EPORT_EPIER_EPIE3
-#define EPORT_EPDR_EPDR2		EPORT_EPIER_EPIE2
-#define EPORT_EPDR_EPDR1		EPORT_EPIER_EPIE1
-
-#define EPORT_EPPDR_EPPDR7		EPORT_EPIER_EPIE7
-#define EPORT_EPPDR_EPPDR6		EPORT_EPIER_EPIE6
-#define EPORT_EPPDR_EPPDR5		EPORT_EPIER_EPIE5
-#define EPORT_EPPDR_EPPDR4		EPORT_EPIER_EPIE4
-#define EPORT_EPPDR_EPPDR3		EPORT_EPIER_EPIE3
-#define EPORT_EPPDR_EPPDR2		EPORT_EPIER_EPIE2
-#define EPORT_EPPDR_EPPDR1		EPORT_EPIER_EPIE1
-
-/*********************************************************************
 * Watchdog Timer Modules (WTM)
 *********************************************************************/
 /* Bit definitions and macros for WTM_WCR */
@@ -809,97 +599,4 @@
 #define WTM_WCR_HALTED			(0x0002)
 #define WTM_WCR_EN			(0x0001)
 
-/*********************************************************************
-* FlexCAN Module (CAN)
-*********************************************************************/
-/* Bit definitions and macros for CAN_CANMCR */
-#define CANMCR_MDIS			(0x80000000)
-#define CANMCR_FRZ			(0x40000000)
-#define CANMCR_HALT			(0x10000000)
-#define CANMCR_NORDY			(0x08000000)
-#define CANMCR_SOFTRST			(0x02000000)
-#define CANMCR_FRZACK			(0x01000000)
-#define CANMCR_SUPV			(0x00800000)
-#define CANMCR_LPMACK			(0x00100000)
-#define CANMCR_MAXMB(x)			(((x)&0x0F))
-
-/* Bit definitions and macros for CAN_CANCTRL */
-#define CANCTRL_PRESDIV(x)		(((x)&0xFF)<<24)
-#define CANCTRL_RJW(x)			(((x)&0x03)<<22)
-#define CANCTRL_PSEG1(x)		(((x)&0x07)<<19)
-#define CANCTRL_PSEG2(x)		(((x)&0x07)<<16)
-#define CANCTRL_BOFFMSK			(0x00008000)
-#define CANCTRL_ERRMSK			(0x00004000)
-#define CANCTRL_CLKSRC			(0x00002000)
-#define CANCTRL_LPB			(0x00001000)
-#define CANCTRL_SMP			(0x00000080)
-#define CANCTRL_BOFFREC			(0x00000040)
-#define CANCTRL_TSYNC			(0x00000020)
-#define CANCTRL_LBUF			(0x00000010)
-#define CANCTRL_LOM			(0x00000008)
-#define CANCTRL_PROPSEG(x)		(((x)&0x07))
-
-/* Bit definitions and macros for CAN_TIMER */
-#define TIMER_TIMER(x)			((x)&0xFFFF)
-
-/* Bit definitions and macros for CAN_RXGMASK */
-#define RXGMASK_MI(x)			((x)&0x1FFFFFFF)
-
-/* Bit definitions and macros for CAN_ERRCNT */
-#define ERRCNT_TXECTR(x)		(((x)&0xFF))
-#define ERRCNT_RXECTR(x)		(((x)&0xFF)<<8)
-
-/* Bit definitions and macros for CAN_ERRSTAT */
-#define ERRSTAT_BITERR1			(0x00008000)
-#define ERRSTAT_BITERR0			(0x00004000)
-#define ERRSTAT_ACKERR			(0x00002000)
-#define ERRSTAT_CRCERR			(0x00001000)
-#define ERRSTAT_FRMERR			(0x00000800)
-#define ERRSTAT_STFERR			(0x00000400)
-#define ERRSTAT_TXWRN			(0x00000200)
-#define ERRSTAT_RXWRN			(0x00000100)
-#define ERRSTAT_IDLE			(0x00000080)
-#define ERRSTAT_TXRX			(0x00000040)
-#define ERRSTAT_FLT_BUSOFF		(0x00000020)
-#define ERRSTAT_FLT_PASSIVE		(0x00000010)
-#define ERRSTAT_FLT_ACTIVE		(0x00000000)
-#define ERRSTAT_BOFFINT			(0x00000004)
-#define ERRSTAT_ERRINT			(0x00000002)
-
-/* Bit definitions and macros for CAN_IMASK */
-#define IMASK_BUF15M			(0x00008000)
-#define IMASK_BUF14M			(0x00004000)
-#define IMASK_BUF13M			(0x00002000)
-#define IMASK_BUF12M			(0x00001000)
-#define IMASK_BUF11M			(0x00000800)
-#define IMASK_BUF10M			(0x00000400)
-#define IMASK_BUF9M			(0x00000200)
-#define IMASK_BUF8M			(0x00000100)
-#define IMASK_BUF7M			(0x00000080)
-#define IMASK_BUF6M			(0x00000040)
-#define IMASK_BUF5M			(0x00000020)
-#define IMASK_BUF4M			(0x00000010)
-#define IMASK_BUF3M			(0x00000008)
-#define IMASK_BUF2M			(0x00000004)
-#define IMASK_BUF1M			(0x00000002)
-#define IMASK_BUF0M			(0x00000001)
-
-/* Bit definitions and macros for CAN_IFLAG */
-#define IFLAG_BUF15I			(0x00008000)
-#define IFLAG_BUF14I			(0x00004000)
-#define IFLAG_BUF13I			(0x00002000)
-#define IFLAG_BUF12I			(0x00001000)
-#define IFLAG_BUF11I			(0x00000800)
-#define IFLAG_BUF10I			(0x00000400)
-#define IFLAG_BUF9I			(0x00000200)
-#define IFLAG_BUF8I			(0x00000100)
-#define IFLAG_BUF7I			(0x00000080)
-#define IFLAG_BUF6I			(0x00000040)
-#define IFLAG_BUF5I			(0x00000020)
-#define IFLAG_BUF4I			(0x00000010)
-#define IFLAG_BUF3I			(0x00000008)
-#define IFLAG_BUF2I			(0x00000004)
-#define IFLAG_BUF1I			(0x00000002)
-#define IFLAG_BUF0I			(0x00000001)
-
 #endif				/* mcf5235_h */
diff --git a/include/asm-m68k/m5249.h b/include/asm-m68k/m5249.h
index feb675c..fa0cb14 100644
--- a/include/asm-m68k/m5249.h
+++ b/include/asm-m68k/m5249.h
@@ -77,19 +77,6 @@
 #define MCFSIM_IPR		0x40	/* Interrupt Pend reg (r/w) */
 #define MCFSIM_IMR		0x44	/* Interrupt Mask reg (r/w) */
 
-#define MCFSIM_CSAR0		0x80	/* CS 0 Address 0 reg (r/w) */
-#define MCFSIM_CSMR0		0x84	/* CS 0 Mask 0 reg (r/w) */
-#define MCFSIM_CSCR0		0x8a	/* CS 0 Control reg (r/w) */
-#define MCFSIM_CSAR1		0x8c	/* CS 1 Address reg (r/w) */
-#define MCFSIM_CSMR1		0x90	/* CS 1 Mask reg (r/w) */
-#define MCFSIM_CSCR1		0x96	/* CS 1 Control reg (r/w) */
-#define MCFSIM_CSAR2		0x98	/* CS 2 Address reg (r/w) */
-#define MCFSIM_CSMR2		0x9c	/* CS 2 Mask reg (r/w) */
-#define MCFSIM_CSCR2		0xa2	/* CS 2 Control reg (r/w) */
-#define MCFSIM_CSAR3		0xa4	/* CS 3 Address reg (r/w) */
-#define MCFSIM_CSMR3		0xa8	/* CS 3 Mask reg (r/w) */
-#define MCFSIM_CSCR3		0xae	/* CS 3 Control reg (r/w) */
-
 #define MCFSIM_DCR		0x100	/* DRAM Control reg (r/w) */
 #define MCFSIM_DACR0		0x108	/* DRAM 0 Addr and Ctrl (r/w) */
 #define MCFSIM_DMR0		0x10c	/* DRAM 0 Mask reg (r/w) */
diff --git a/include/asm-m68k/m5271.h b/include/asm-m68k/m5271.h
index 000f0a5..7877616 100644
--- a/include/asm-m68k/m5271.h
+++ b/include/asm-m68k/m5271.h
@@ -116,9 +116,7 @@
 
 #define MCFSIM_ICR1				0x000C41
 
-/*********************************************************************
-* Interrupt Controller (INTC)
-*********************************************************************/
+/* Interrupt Controller (INTC) */
 #define INT0_LO_RSVD0			(0)
 #define INT0_LO_EPORT1			(1)
 #define INT0_LO_EPORT2			(2)
@@ -182,38 +180,4 @@
 #define INT0_HI_CAN1_BOFFINT		(60)
 /* 60-63 Reserved */
 
-/* Bit definitions and macros for INTC_IPRL */
-#define INTC_IPRL_INT31			(0x80000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT0			(0x00000001)
-
 #endif				/* _MCF5271_H_ */
diff --git a/include/asm-m68k/m5275.h b/include/asm-m68k/m5275.h
index 89c6c92..24dbae2 100644
--- a/include/asm-m68k/m5275.h
+++ b/include/asm-m68k/m5275.h
@@ -30,18 +30,6 @@
  * Define the 5275 SIM register set addresses. These are similar,
  * but not quite identical to the 5282 registers and offsets.
  */
-#define	MCFICM_INTC0		0x0c00		/* Base for Interrupt Ctrl 0 */
-#define	MCFICM_INTC1		0x0d00		/* Base for Interrupt Ctrl 1 */
-#define	MCFINTC_IPRH		0x00		/* Interrupt pending 32-63 */
-#define	MCFINTC_IPRL		0x04		/* Interrupt pending 1-31 */
-#define	MCFINTC_IMRH		0x08		/* Interrupt mask 32-63 */
-#define	MCFINTC_IMRL		0x0c		/* Interrupt mask 1-31 */
-#define	MCFINTC_INTFRCH		0x10		/* Interrupt force 32-63 */
-#define	MCFINTC_INTFRCL		0x14		/* Interrupt force 1-31 */
-#define	MCFINTC_IRLR		0x18		/* */
-#define	MCFINTC_IACKL		0x19		/* */
-#define	MCFINTC_ICR0		0x40		/* Base ICR register */
-
 #define MCF_GPIO_PAR_UART	0x10007c
 #define UART0_ENABLE_MASK	0x000f
 #define UART1_ENABLE_MASK	0x00f0
@@ -198,40 +186,6 @@
 #define INT1_HI_FEC1_BABR	(35)
 /* 36-63 Reserved */
 
-/* Bit definitions and macros for INTC_IPRL */
-#define INTC_IPRL_INT31		(0x80000000)
-#define INTC_IPRL_INT30		(0x40000000)
-#define INTC_IPRL_INT29		(0x20000000)
-#define INTC_IPRL_INT28		(0x10000000)
-#define INTC_IPRL_INT27		(0x08000000)
-#define INTC_IPRL_INT26		(0x04000000)
-#define INTC_IPRL_INT25		(0x02000000)
-#define INTC_IPRL_INT24		(0x01000000)
-#define INTC_IPRL_INT23		(0x00800000)
-#define INTC_IPRL_INT22		(0x00400000)
-#define INTC_IPRL_INT21		(0x00200000)
-#define INTC_IPRL_INT20		(0x00100000)
-#define INTC_IPRL_INT19		(0x00080000)
-#define INTC_IPRL_INT18		(0x00040000)
-#define INTC_IPRL_INT17		(0x00020000)
-#define INTC_IPRL_INT16		(0x00010000)
-#define INTC_IPRL_INT15		(0x00008000)
-#define INTC_IPRL_INT14		(0x00004000)
-#define INTC_IPRL_INT13		(0x00002000)
-#define INTC_IPRL_INT12		(0x00001000)
-#define INTC_IPRL_INT11		(0x00000800)
-#define INTC_IPRL_INT10		(0x00000400)
-#define INTC_IPRL_INT9		(0x00000200)
-#define INTC_IPRL_INT8		(0x00000100)
-#define INTC_IPRL_INT7		(0x00000080)
-#define INTC_IPRL_INT6		(0x00000040)
-#define INTC_IPRL_INT5		(0x00000020)
-#define INTC_IPRL_INT4		(0x00000010)
-#define INTC_IPRL_INT3		(0x00000008)
-#define INTC_IPRL_INT2		(0x00000004)
-#define INTC_IPRL_INT1		(0x00000002)
-#define INTC_IPRL_INT0		(0x00000001)
-
 /* Bit definitions and macros for RCR */
 #define RCM_RCR_FRCRSTOUT	(0x40)
 #define RCM_RCR_SOFTRST		(0x80)
diff --git a/include/asm-m68k/m5282.h b/include/asm-m68k/m5282.h
index 772c7e0..d59a8b2 100644
--- a/include/asm-m68k/m5282.h
+++ b/include/asm-m68k/m5282.h
@@ -440,29 +440,6 @@
 #define MCFWTM_WCNTR		(*(vu_short *)(CONFIG_SYS_MBAR+0x00140004))
 #define MCFWTM_WSR		(*(vu_short *)(CONFIG_SYS_MBAR+0x00140006))
 
-/*  Chip SELECT Module CSM */
-#define MCFCSM_CSAR0		(*(vu_short *)(CONFIG_SYS_MBAR+0x00000080))
-#define MCFCSM_CSMR0		(*(vu_long *) (CONFIG_SYS_MBAR+0x00000084))
-#define MCFCSM_CSCR0		(*(vu_short *)(CONFIG_SYS_MBAR+0x0000008a))
-#define MCFCSM_CSAR1		(*(vu_short *)(CONFIG_SYS_MBAR+0x0000008C))
-#define MCFCSM_CSMR1		(*(vu_long *) (CONFIG_SYS_MBAR+0x00000090))
-#define MCFCSM_CSCR1		(*(vu_short *)(CONFIG_SYS_MBAR+0x00000096))
-#define MCFCSM_CSAR2		(*(vu_short *)(CONFIG_SYS_MBAR+0x00000098))
-#define MCFCSM_CSMR2		(*(vu_long *) (CONFIG_SYS_MBAR+0x0000009C))
-#define MCFCSM_CSCR2		(*(vu_short *)(CONFIG_SYS_MBAR+0x000000A2))
-#define MCFCSM_CSAR3		(*(vu_short *)(CONFIG_SYS_MBAR+0x000000A4))
-#define MCFCSM_CSMR3		(*(vu_long *) (CONFIG_SYS_MBAR+0x000000A8))
-#define MCFCSM_CSCR3		(*(vu_short *)(CONFIG_SYS_MBAR+0x000000AE))
-
-#define MCFCSM_CSMR_BAM(x)	((x) & 0xFFFF0000)
-#define MCFCSM_CSMR_WP		(1<<8)
-#define MCFCSM_CSMR_V		(0x01)
-#define MCFCSM_CSCR_WS(x)	((x & 0x0F)<<10)
-#define MCFCSM_CSCR_AA		(0x0100)
-#define MCFCSM_CSCR_PS_32	(0x0000)
-#define MCFCSM_CSCR_PS_8	(0x0040)
-#define MCFCSM_CSCR_PS_16	(0x0080)
-
 /*********************************************************************
 * General Purpose Timer (GPT) Module
 *********************************************************************/
diff --git a/include/asm-m68k/m5301x.h b/include/asm-m68k/m5301x.h
new file mode 100644
index 0000000..52bbb87
--- /dev/null
+++ b/include/asm-m68k/m5301x.h
@@ -0,0 +1,604 @@
+/*
+ * m5301x.h -- Definitions for Freescale Coldfire 5301x
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef m5301x_h
+#define m5301x_h
+
+/* *** System Control Module (SCM) *** */
+#define SCM_MPR_MPROT0(x)		(((x) & 0x0F) << 28)
+#define SCM_MPR_MPROT1(x)		(((x) & 0x0F) << 24)
+#define SCM_MPR_MPROT2(x)		(((x) & 0x0F) << 20)
+#define SCM_MPR_MPROT4(x)		(((x) & 0x0F) << 12)
+#define SCM_MPR_MPROT5(x)		(((x) & 0x0F) << 8)
+#define SCM_MPR_MPROT6(x)		(((x) & 0x0F) << 4)
+#define MPROT_MTR			4
+#define MPROT_MTW			2
+#define MPROT_MPL			1
+
+#define SCM_PACRA_PACR0(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRA_PACR1(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRA_PACR2(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRA_PACR5(x)		(((x) & 0x0F) << 8)
+
+#define SCM_PACRB_PACR12(x)		(((x) & 0x0F) << 12)
+#define SCM_PACRB_PACR13(x)		(((x) & 0x0F) << 8)
+
+#define SCM_PACRC_PACR16(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRC_PACR17(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRC_PACR18(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRC_PACR19(x)		(((x) & 0x0F) << 16)
+#define SCM_PACRC_PACR21(x)		(((x) & 0x0F) << 8)
+#define SCM_PACRC_PACR22(x)		(((x) & 0x0F) << 4)
+#define SCM_PACRC_PACR23(x)		((x) & 0x0F)
+
+#define SCM_PACRD_PACR24(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRD_PACR25(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRD_PACR26(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRD_PACR28(x)		(((x) & 0x0F) << 12)
+#define SCM_PACRD_PACR29(x)		(((x) & 0x0F) << 8)
+#define SCM_PACRD_PACR30(x)		(((x) & 0x0F) << 4)
+#define SCM_PACRD_PACR31(x)		((x) & 0x0F)
+
+#define SCM_PACRE_PACR32(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRE_PACR33(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRE_PACR34(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRE_PACR35(x)		(((x) & 0x0F) << 16)
+#define SCM_PACRE_PACR36(x)		(((x) & 0x0F) << 12)
+#define SCM_PACRE_PACR37(x)		(((x) & 0x0F) << 8)
+#define SCM_PACRE_PACR39(x)		((x) & 0x0F)
+
+#define SCM_PACRF_PACR40(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRF_PACR41(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRF_PACR42(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRF_PACR43(x)		(((x) & 0x0F) << 16)
+#define SCM_PACRF_PACR44(x)		(((x) & 0x0F) << 12)
+#define SCM_PACRF_PACR45(x)		(((x) & 0x0F) << 8)
+#define SCM_PACRF_PACR46(x)		(((x) & 0x0F) << 4)
+#define SCM_PACRF_PACR47(x)		((x) & 0x0F)
+
+#define SCM_PACRG_PACR48(x)		(((x) & 0x0F) << 28)
+#define SCM_PACRG_PACR49(x)		(((x) & 0x0F) << 24)
+#define SCM_PACRG_PACR50(x)		(((x) & 0x0F) << 20)
+#define SCM_PACRG_PACR51(x)		(((x) & 0x0F) << 16)
+
+#define PACR_SP	4
+#define PACR_WP	2
+#define PACR_TP	1
+
+#define SCM_CWCR_RO			(0x8000)
+#define SCM_CWCR_CWR_WH			(0x0100)
+#define SCM_CWCR_CWE			(0x0080)
+#define SCM_CWCR_CWRI_WINDOW		(0x0060)
+#define SCM_CWCR_CWRI_RESET		(0x0040)
+#define SCM_CWCR_CWRI_INT_RESET		(0x0020)
+#define SCM_CWCR_CWRI_INT		(0x0000)
+#define SCM_CWCR_CWT(x)			(((x) & 0x001F))
+
+#define SCM_ISR_CFEI			(0x02)
+#define SCM_ISR_CWIC			(0x01)
+
+#define BCR_GBR				(0x00000200)
+#define BCR_GBW				(0x00000100)
+#define BCR_S7				(0x00000080)
+#define BCR_S6				(0x00000040)
+#define BCR_S4				(0x00000010)
+#define BCR_S1				(0x00000002)
+
+#define SCM_CFIER_ECFEI			(0x01)
+
+#define SCM_CFLOC_LOC			(0x80)
+
+#define SCM_CFATR_WRITE			(0x80)
+#define SCM_CFATR_SZ32			(0x20)
+#define SCM_CFATR_SZ16			(0x10)
+#define SCM_CFATR_SZ08			(0x00)
+#define SCM_CFATR_CACHE			(0x08)
+#define SCM_CFATR_MODE			(0x02)
+#define SCM_CFATR_TYPE			(0x01)
+
+/* *** Interrupt Controller (INTC) *** */
+#define INT0_LO_RSVD0			(0)
+#define INT0_LO_EPORT1			(1)
+#define INT0_LO_EPORT2			(2)
+#define INT0_LO_EPORT3			(3)
+#define INT0_LO_EPORT4			(4)
+#define INT0_LO_EPORT5			(5)
+#define INT0_LO_EPORT6			(6)
+#define INT0_LO_EPORT7			(7)
+#define INT0_LO_EDMA_00			(8)
+#define INT0_LO_EDMA_01			(9)
+#define INT0_LO_EDMA_02			(10)
+#define INT0_LO_EDMA_03			(11)
+#define INT0_LO_EDMA_04			(12)
+#define INT0_LO_EDMA_05			(13)
+#define INT0_LO_EDMA_06			(14)
+#define INT0_LO_EDMA_07			(15)
+#define INT0_LO_EDMA_08			(16)
+#define INT0_LO_EDMA_09			(17)
+#define INT0_LO_EDMA_10			(18)
+#define INT0_LO_EDMA_11			(19)
+#define INT0_LO_EDMA_12			(20)
+#define INT0_LO_EDMA_13			(21)
+#define INT0_LO_EDMA_14			(22)
+#define INT0_LO_EDMA_15			(23)
+#define INT0_LO_EDMA_ERR		(24)
+#define INT0_LO_SCM_CWIC		(25)
+#define INT0_LO_UART0			(26)
+#define INT0_LO_UART1			(27)
+#define INT0_LO_UART2			(28)
+#define INT0_LO_RSVD1			(29)
+#define INT0_LO_I2C			(30)
+#define INT0_LO_DSPI			(31)
+#define INT0_HI_DTMR0			(32)
+#define INT0_HI_DTMR1			(33)
+#define INT0_HI_DTMR2			(34)
+#define INT0_HI_DTMR3			(35)
+#define INT0_HI_FEC0_TXF		(36)
+#define INT0_HI_FEC0_TXB		(37)
+#define INT0_HI_FEC0_UN			(38)
+#define INT0_HI_FEC0_RL			(39)
+#define INT0_HI_FEC0_RXF		(40)
+#define INT0_HI_FEC0_RXB		(41)
+#define INT0_HI_FEC0_MII		(42)
+#define INT0_HI_FEC0_LC			(43)
+#define INT0_HI_FEC0_HBERR		(44)
+#define INT0_HI_FEC0_GRA		(45)
+#define INT0_HI_FEC0_EBERR		(46)
+#define INT0_HI_FEC0_BABT		(47)
+#define INT0_HI_FEC0_BABR		(48)
+#define INT0_HI_FEC1_TXF		(49)
+#define INT0_HI_FEC1_TXB		(50)
+#define INT0_HI_FEC1_UN			(51)
+#define INT0_HI_FEC1_RL			(52)
+#define INT0_HI_FEC1_RXF		(53)
+#define INT0_HI_FEC1_RXB		(54)
+#define INT0_HI_FEC1_MII		(55)
+#define INT0_HI_FEC1_LC			(56)
+#define INT0_HI_FEC1_HBERR		(57)
+#define INT0_HI_FEC1_GRA		(58)
+#define INT0_HI_FEC1_EBERR		(59)
+#define INT0_HI_FEC1_BABT		(60)
+#define INT0_HI_FEC1_BABR		(61)
+#define INT0_HI_SCM_CFEI		(62)
+
+/* 0 - 24 reserved */
+#define INT1_LO_EPORT1_FLAG0		(25)
+#define INT1_LO_EPORT1_FLAG1		(26)
+#define INT1_LO_EPORT1_FLAG2		(27)
+#define INT1_LO_EPORT1_FLAG3		(28)
+#define INT1_LO_EPORT1_FLAG4		(29)
+#define INT1_LO_EPORT1_FLAG5		(30)
+#define INT1_LO_EPORT1_FLAG6		(31)
+#define INT1_LO_EPORT1_FLAG7		(32)
+#define INT1_HI_DSPI_EOQF		(33)
+#define INT1_HI_DSPI_TFFF		(34)
+#define INT1_HI_DSPI_TCF		(35)
+#define INT1_HI_DSPI_TFUF		(36)
+#define INT1_HI_DSPI_RFDF		(37)
+#define INT1_HI_DSPI_RFOF		(38)
+#define INT1_HI_DSPI_RFOF_TFUF		(39)
+#define INT1_HI_RNG_EI			(40)
+#define INT1_HI_PLL_LOCF		(41)
+#define INT1_HI_PLL_LOLF		(42)
+#define INT1_HI_PIT0			(43)
+#define INT1_HI_PIT1			(44)
+#define INT1_HI_PIT2			(45)
+#define INT1_HI_PIT3			(46)
+#define INT1_HI_USBOTG_STS		(47)
+#define INT1_HI_USBHOST_STS		(48)
+#define INT1_HI_SSI			(49)
+/* 50 - 51 reserved */
+#define INT1_HI_RTC			(52)
+#define INT1_HI_CCM_USBSTAT		(53)
+#define INT1_HI_CODEC_OR		(54)
+#define INT1_HI_CODEC_RF_TE		(55)
+#define INT1_HI_CODEC_ROE		(56)
+#define INT1_HI_CODEC_TUE		(57)
+/* 58 reserved */
+#define INT1_HI_SIM1_DATA		(59)
+#define INT1_HI_SIM1_GENERAL		(60)
+/* 61 - 62 reserved */
+#define INT1_HI_SDHC			(63)
+
+/* *** Reset Controller Module (RCM) *** */
+#define RCM_RCR_SOFTRST			(0x80)
+#define RCM_RCR_FRCRSTOUT		(0x40)
+
+#define RCM_RSR_SOFT			(0x20)
+#define RCM_RSR_LOC			(0x10)
+#define RCM_RSR_POR			(0x08)
+#define RCM_RSR_EXT			(0x04)
+#define RCM_RSR_WDR_CORE		(0x02)
+#define RCM_RSR_LOL			(0x01)
+
+/* *** Chip Configuration Module (CCM) *** */
+#define CCM_CCR_CSC			(0x0020)
+#define CCM_CCR_BOOTPS			(0x0010)
+#define CCM_CCR_LOAD			(0x0008)
+#define CCM_CCR_OSC_MODE		(0x0004)
+#define CCM_CCR_SDR_MODE		(0x0002)
+#define CCM_CCR_RESERVED		(0x0001)
+
+#define CCM_RCON_SDR_32BIT_UNIFIED	(0x0012)
+#define CCM_RCON_DDR_8BIT_SPLIT		(0x0010)
+#define CCM_RCON_SDR_16BIT_UNIFIED	(0x0002)
+#define CCM_RCON_DDR_16BIT_SPLIT	(0x0000)
+
+#define CCM_CIR_PIN(x)			(((x) & 0x03FF) << 6)
+#define CCM_CIR_PRN(x)			((x) & 0x003F)
+
+#define CCM_MISCCR_FECM			(0x8000)
+#define CCM_MISCCR_CDCSRC		(0x4000)
+#define CCM_MISCCR_PLL_LOCK		(0x2000)
+#define CCM_MISCCR_LIMP			(0x1000)
+#define CCM_MISCCR_BME			(0x8000)
+#define CCM_MISCCR_BMT_MASK		(0xF8FF)
+#define CCM_MISCCR_BMT(x)		(((x) & 0x0007) << 8)
+#define CCM_MISCCR_BMT_512		(0x0700)
+#define CCM_MISCCR_BMT_1024		(0x0600)
+#define CCM_MISCCR_BMT_2048		(0x0500)
+#define CCM_MISCCR_BMT_4096		(0x0400)
+#define CCM_MISCCR_BMT_8192		(0x0300)
+#define CCM_MISCCR_BMT_16384		(0x0200)
+#define CCM_MISCCR_BMT_32768		(0x0100)
+#define CCM_MISCCR_BMT_65536		(0x0000)
+#define CCM_MISCCR_TIM_DMA		(0x0020)
+#define CCM_MISCCR_SSI_SRC		(0x0010)
+#define CCM_MISCCR_USBH_OC		(0x0008)
+#define CCM_MISCCR_USBO_OC		(0x0004)
+#define CCM_MISCCR_USB_PUE		(0x0002)
+#define CCM_MISCCR_USB_SRC		(0x0001)
+
+#define CCM_CDR_LPDIV(x)		(((x) & 0x0F) << 8)
+#define CCM_CDR_SSIDIV(x)		((x) & 0xFF)
+
+#define CCM_UOCSR_DPPD			(0x2000)
+#define CCM_UOCSR_DMPD			(0x1000)
+#define CCM_UOCSR_DRV_VBUS		(0x0800)
+#define CCM_UOCSR_CRG_VBUS		(0x0400)
+#define CCM_UOCSR_DCR_VBUS		(0x0200)
+#define CCM_UOCSR_DPPU			(0x0100)
+#define CCM_UOCSR_AVLD			(0x0080)
+#define CCM_UOCSR_BVLD			(0x0040)
+#define CCM_UOCSR_VVLD			(0x0020)
+#define CCM_UOCSR_SEND			(0x0010)
+#define CCM_UOCSR_PWRFLT		(0x0008)
+#define CCM_UOCSR_WKUP			(0x0004)
+#define CCM_UOCSR_UOMIE			(0x0002)
+#define CCM_UOCSR_XPDE			(0x0001)
+
+#define CCM_UHCSR_PORTIND(x)		(((x) & 0x0003) << 14)
+#define CCM_UHCSR_DRV_VBUS		(0x0010)
+#define CCM_UHCSR_PWRFLT		(0x0008)
+#define CCM_UHCSR_WKUP			(0x0004)
+#define CCM_UHCSR_UHMIE			(0x0002)
+#define CCM_UHCSR_XPDE			(0x0001)
+
+#define CCM_CODCR_BGREN			(0x8000)
+#define CCM_CODCR_REGEN			(0x0080)
+
+#define CCM_MISC2_IGNLL			(0x0008)
+#define CCM_MISC2_DPS			(0x0001)
+
+/* *** General Purpose I/O (GPIO) *** */
+#define GPIO_PDR_FBCTL			((x) & 0x0F)
+#define GPIO_PDR_BE			((x) & 0x0F)
+#define GPIO_PDR_CS32			(((x) & 0x03) << 4)
+#define GPIO_PDR_CS10			(((x) & 0x03) << 4)
+#define GPIO_PDR_DSPI			((x) & 0x7F)
+#define GPIO_PDR_FEC0			((x) & 0x7F)
+#define GPIO_PDR_FECI2C			((x) & 0x3F)
+#define GPIO_PDR_SIMP1			((x) & 0x1F)
+#define GPIO_PDR_SIMP0			((x) & 0x1F)
+#define GPIO_PDR_TIMER			((x) & 0x0F)
+#define GPIO_PDR_UART			((x) & 0x3F)
+#define GPIO_PDR_DEBUG			(0x01)
+#define GPIO_PDR_SDHC			((x) & 0x3F)
+#define GPIO_PDR_SSI			((x) & 0x1F)
+
+#define GPIO_PAR_FBCTL_OE		(0x80)
+#define GPIO_PAR_FBCTL_TA		(0x40)
+#define GPIO_PAR_FBCTL_RWB		(0x20)
+#define GPIO_PAR_FBCTL_TS		(0x18)
+
+#define GPIO_PAR_BE3			(0x40)
+#define GPIO_PAR_BE2			(0x10)
+#define GPIO_PAR_BE1			(0x04)
+#define GPIO_PAR_BE0			(0x01)
+
+#define GPIO_PAR_CS5			(0x40)
+#define GPIO_PAR_CS4			(0x10)
+#define GPIO_PAR_CS1_MASK		(0xF3)
+#define GPIO_PAR_CS1_CS1		(0x0C)
+#define GPIO_PAR_CS1_SDCS1		(0x08)
+#define GPIO_PAR_CS0_MASK		(0xFC)
+#define GPIO_PAR_CS0_CS0		(0x03)
+#define GPIO_PAR_CS0_CS4		(0x02)
+
+#define GPIO_PAR_DSPIH_SIN_MASK		(0x3F)
+#define GPIO_PAR_DSPIH_SIN		(0xC0)
+#define GPIO_PAR_DSPIH_SIN_U2RXD	(0x80)
+#define GPIO_PAR_DSPIH_SOUT_MASK	(0xCF)
+#define GPIO_PAR_DSPIH_SOUT		(0x30)
+#define GPIO_PAR_DSPIH_SOUT_U2TXD	(0x20)
+#define GPIO_PAR_DSPIH_SCK_MASK		(0xF3)
+#define GPIO_PAR_DSPIH_SCK		(0x0C)
+#define GPIO_PAR_DSPIH_SCK_U2CTS	(0x08)
+#define GPIO_PAR_DSPIH_PCS0_MASK	(0xFC)
+#define GPIO_PAR_DSPIH_PCS0		(0x03)
+#define GPIO_PAR_DSPIH_PCS0_U2RTS	(0x02)
+
+#define GPIO_PAR_DSPIL_PCS1_MASK	(0x3F)
+#define GPIO_PAR_DSPIL_PCS1		(0xC0)
+#define GPIO_PAR_DSPIL_PCS2_MASK	(0xCF)
+#define GPIO_PAR_DSPIL_PCS2		(0x30)
+#define GPIO_PAR_DSPIL_PCS2_USBH_OC	(0x20)
+#define GPIO_PAR_DSPIL_PCS3_MASK	(0xF3)
+#define GPIO_PAR_DSPIL_PCS3		(0x0C)
+#define GPIO_PAR_DSPIL_PCS3_USBH_EN	(0x08)
+
+#define GPIO_PAR_FEC1_7W_FEC		(0x40)
+#define GPIO_PAR_FEC1_RMII_FEC		(0x10)
+#define GPIO_PAR_FEC0_7W_FEC		(0x04)
+#define GPIO_PAR_FEC0_RMII_FEC		(0x01)
+
+/* GPIO_PAR_FECI2C */
+#define GPIO_PAR_FECI2C_RMII0_MASK	(0x3F)
+#define GPIO_PAR_FECI2C_MDC0		(0x80)
+#define GPIO_PAR_FECI2C_MDIO0		(0x40)
+#define GPIO_PAR_FECI2C_RMII1_MASK	(0xCF)
+#define GPIO_PAR_FECI2C_MDC1		(0x20)
+#define GPIO_PAR_FECI2C_MDIO1		(0x10)
+#define GPIO_PAR_FECI2C_SDA_MASK	(0xF3)
+#define GPIO_PAR_FECI2C_SDA(x)		(((x) & 0x03) << 2)
+#define GPIO_PAR_FECI2C_SDA_SDA		(0x0C)
+#define GPIO_PAR_FECI2C_SDA_U2TXD	(0x08)
+#define GPIO_PAR_FECI2C_SDA_MDIO1	(0x04)
+#define GPIO_PAR_FECI2C_SCL_MASK	(0xFC)
+#define GPIO_PAR_FECI2C_SCL(x)		((x) & 0x03)
+#define GPIO_PAR_FECI2C_SCL_SCL		(0x03)
+#define GPIO_PAR_FECI2C_SCL_U2RXD	(0x02)
+#define GPIO_PAR_FECI2C_SCL_MDC1	(0x01)
+
+#define GPIO_PAR_IRQ0H_IRQ07_MASK	(0x3F)
+#define GPIO_PAR_IRQ0H_IRQ06_MASK	(0xCF)
+#define GPIO_PAR_IRQ0H_IRQ06_USBCLKIN	(0x10)
+#define GPIO_PAR_IRQ0H_IRQ04_MASK	(0xFC)
+#define GPIO_PAR_IRQ0H_IRQ04_DREQ0	(0x02)
+
+#define GPIO_PAR_IRQ0L_IRQ01_MASK	(0xF3)
+#define GPIO_PAR_IRQ0L_IRQ01_DREQ1	(0x08)
+
+#define GPIO_PAR_IRQ1H_IRQ17_DDATA3	(0x40)
+#define GPIO_PAR_IRQ1H_IRQ16_DDATA2	(0x10)
+#define GPIO_PAR_IRQ1H_IRQ15_DDATA1	(0x04)
+#define GPIO_PAR_IRQ1H_IRQ14_DDATA0	(0x01)
+
+#define GPIO_PAR_IRQ1L_IRQ13_PST3	(0x40)
+#define GPIO_PAR_IRQ1L_IRQ12_PST2	(0x10)
+#define GPIO_PAR_IRQ1L_IRQ11_PST1	(0x04)
+#define GPIO_PAR_IRQ1L_IRQ10_PST0	(0x01)
+
+#define GPIO_PAR_SIMP1H_DATA1_MASK	(0x3F)
+#define GPIO_PAR_SIMP1H_DATA1_SIMDATA1	(0xC0)
+#define GPIO_PAR_SIMP1H_DATA1_SSITXD	(0x80)
+#define GPIO_PAR_SIMP1H_DATA1_U1TXD	(0x40)
+#define GPIO_PAR_SIMP1H_VEN1_MASK	(0xCF)
+#define GPIO_PAR_SIMP1H_VEN1_SIMVEN1	(0x30)
+#define GPIO_PAR_SIMP1H_VEN1_SSIRXD	(0x20)
+#define GPIO_PAR_SIMP1H_VEN1_U1RXD	(0x10)
+#define GPIO_PAR_SIMP1H_RST1_MASK	(0xF3)
+#define GPIO_PAR_SIMP1H_RST1_SIMRST1	(0x0C)
+#define GPIO_PAR_SIMP1H_RST1_SSIFS	(0x08)
+#define GPIO_PAR_SIMP1H_RST1_U1RTS	(0x04)
+#define GPIO_PAR_SIMP1H_PD1_MASK	(0xFC)
+#define GPIO_PAR_SIMP1H_PD1_SIMPD1	(0x03)
+#define GPIO_PAR_SIMP1H_PD1_SSIBCLK	(0x02)
+#define GPIO_PAR_SIMP1H_PD1_U1CTS	(0x01)
+
+#define GPIO_PAR_SIMP1L_CLK_MASK	(0x3F)
+#define GPIO_PAR_SIMP1L_CLK_CLK1	(0xC0)
+#define GPIO_PAR_SIMP1L_CLK_SSIMCLK	(0x80)
+
+#define GPIO_PAR_SIMP0_DATA0		(0x10)
+#define GPIO_PAR_SIMP0_VEN0		(0x08)
+#define GPIO_PAR_SIMP0_RST0		(0x04)
+#define GPIO_PAR_SIMP0_PD0		(0x02)
+#define GPIO_PAR_SIMP0_CLK0		(0x01)
+
+#define GPIO_PAR_TIN3(x)		(((x) & 0x03) << 6)
+#define GPIO_PAR_TIN2(x)		(((x) & 0x03) << 4)
+#define GPIO_PAR_TIN1(x)		(((x) & 0x03) << 2)
+#define GPIO_PAR_TIN0(x)		((x) & 0x03)
+#define GPIO_PAR_TIN3_MASK		(0x3F)
+#define GPIO_PAR_TIN3_TIN3		(0xC0)
+#define GPIO_PAR_TIN3_TOUT3		(0x80)
+#define GPIO_PAR_TIN3_IRQ03		(0x40)
+#define GPIO_PAR_TIN2_MASK		(0xCF)
+#define GPIO_PAR_TIN2_TIN2		(0x30)
+#define GPIO_PAR_TIN2_TOUT2		(0x20)
+#define GPIO_PAR_TIN2_IRQ02		(0x10)
+#define GPIO_PAR_TIN1_MASK		(0xF3)
+#define GPIO_PAR_TIN1_TIN1		(0x0C)
+#define GPIO_PAR_TIN1_TOUT1		(0x08)
+#define GPIO_PAR_TIN1_DACK1		(0x04)
+#define GPIO_PAR_TIN0_MASK		(0xFC)
+#define GPIO_PAR_TIN0_TIN0		(0x03)
+#define GPIO_PAR_TIN0_TOUT0		(0x02)
+#define GPIO_PAR_TIN0_CODEC_ALTCLK	(0x01)
+
+#define GPIO_PAR_UART_U2TXD		(0x80)
+#define GPIO_PAR_UART_U2RXD		(0x40)
+#define GPIO_PAR_UART_U0TXD		(0x20)
+#define GPIO_PAR_UART_U0RXD		(0x10)
+#define GPIO_PAR_UART_RTS0(x)		(((x) & 0x03) << 2)
+#define GPIO_PAR_UART_CTS0(x)		((x) & 0x03)
+#define GPIO_PAR_UART_RTS0_MASK		(0xF3)
+#define GPIO_PAR_UART_RTS0_U0RTS	(0x0C)
+#define GPIO_PAR_UART_RTS0_USBO_VBOC	(0x08)
+#define GPIO_PAR_UART_CTS0_MASK		(0xFC)
+#define GPIO_PAR_UART_CTS0_U0CTS	(0x03)
+#define GPIO_PAR_UART_CTS0_USB0_VBEN	(0x02)
+#define GPIO_PAR_UART_CTS0_USB_PULLUP	(0x01)
+
+#define GPIO_PAR_DEBUG_ALLPST		(0x80)
+
+#define GPIO_PAR_SDHC_DATA3		(0x20)
+#define GPIO_PAR_SDHC_DATA2		(0x10)
+#define GPIO_PAR_SDHC_DATA1		(0x08)
+#define GPIO_PAR_SDHC_DATA0		(0x04)
+#define GPIO_PAR_SDHC_CMD		(0x02)
+#define GPIO_PAR_SDHC_CLK		(0x01)
+
+#define GPIO_PAR_SSIH_RXD(x)		(((x) & 0x03) << 6)
+#define GPIO_PAR_SSIH_TXD(x)		(((x) & 0x03) << 4)
+#define GPIO_PAR_SSIH_FS(x)		(((x) & 0x03) << 2)
+#define GPIO_PAR_SSIH_MCLK(x)		((x) & 0x03)
+#define GPIO_PAR_SSIH_RXD_MASK		(0x3F)
+#define GPIO_PAR_SSIH_RXD_SSIRXD	(0xC0)
+#define GPIO_PAR_SSIH_RXD_U1RXD		(0x40)
+#define GPIO_PAR_SSIH_TXD_MASK		(0xCF)
+#define GPIO_PAR_SSIH_TXD_SSIRXD	(0x30)
+#define GPIO_PAR_SSIH_TXD_U1TXD		(0x10)
+#define GPIO_PAR_SSIH_FS_MASK		(0xF3)
+#define GPIO_PAR_SSIH_FS_SSIFS		(0x0C)
+#define GPIO_PAR_SSIH_FS_U1RTS		(0x04)
+#define GPIO_PAR_SSIH_MCLK_MASK		(0xFC)
+#define GPIO_PAR_SSIH_MCLK_SSIMCLK	(0x03)
+#define GPIO_PAR_SSIH_MCLK_SSICLKIN	(0x01)
+
+#define GPIO_PAR_SSIL_MASK		(0x3F)
+#define GPIO_PAR_SSIL_BCLK		(0xC0)
+#define GPIO_PAR_SSIL_U1CTS		(0x40)
+
+#define GPIO_MSCR_MSCR1(x)		(((x) & 0x07) << 5)
+#define GPIO_MSCR_MSCR2(x)		(((x) & 0x07) << 5)
+#define GPIO_MSCR_MSCR3(x)		(((x) & 0x07) << 5)
+#define GPIO_MSCR_MSCR4(x)		(((x) & 0x07) << 5)
+#define GPIO_MSCR_MSCRn_MASK		(0x1F)
+#define GPIO_MSCR_MSCRn_SDR		(0xE0)
+#define GPIO_MSCR_MSCRn_25VDDR		(0x60)
+#define GPIO_MSCR_MSCRn_18VDDR_FULL	(0x20)
+#define GPIO_MSCR_MSCRn_18VDDR_HALF	(0x00)
+
+#define GPIO_MSCR_MSCR5(x)		(((x) & 0x07) << 2)
+#define GPIO_MSCR_MSCR5_MASK		(0xE3)
+#define GPIO_MSCR_MSCR5_SDR		(0x1C)
+#define GPIO_MSCR_MSCR5_25VDDR		(0x0C)
+#define GPIO_MSCR_MSCR5_18VDDR_FULL	(0x04)
+#define GPIO_MSCR_MSCR5_18VDDR_HALF	(0x00)
+
+#define GPIO_SRCR_DSPI_MASK		(0xFC)
+#define GPIO_SRCR_DSPI(x)		((x) & 0x03)
+#define GPIO_SRCR_I2C_MASK		(0xFC)
+#define GPIO_SRCR_I2C(x)		((x) & 0x03)
+#define GPIO_SRCR_IRQ_IRQ0_MASK		(0xF3)
+#define GPIO_SRCR_IRQ_IRQ0(x)		(((x) & 0x03) << 2)
+#define GPIO_SRCR_IRQ_IRQ1DBG_MASK	(0xFC)
+#define GPIO_SRCR_IRQ_IRQ1DBG(x)	((x) & 0x03)
+#define GPIO_SRCR_SIM_SIMP0_MASK	(0xF3)
+#define GPIO_SRCR_SIM_SIMP0(x)		(((x) & 0x03) << 2)
+#define GPIO_SRCR_SIM_SIMP1_MASK	(0xFC)
+#define GPIO_SRCR_SIM_SIMP1(x)		((x) & 0x03)
+#define GPIO_SRCR_TIMER_MASK		(0xFC)
+#define GPIO_SRCR_TIMER(x)		((x) & 0x03)
+#define GPIO_SRCR_UART2_MASK		(0xF3)
+#define GPIO_SRCR_UART2(x)		(((x) & 0x03) << 2)
+#define GPIO_SRCR_UART0_MASK		(0xFC)
+#define GPIO_SRCR_UART0(x)		((x) & 0x03)
+#define GPIO_SRCR_SDHC_MASK		(0xFC)
+#define GPIO_SRCR_SDHC(x)		((x) & 0x03)
+#define GPIO_SRCR_SSI_MASK		(0xFC)
+#define GPIO_SRCR_SSI(x)		((x) & 0x03)
+
+#define SRCR_HIGHEST			(0x03)
+#define SRCR_HIGH			(0x02)
+#define SRCR_LOW			(0x01)
+#define SRCR_LOWEST			(0x00)
+
+#define GPIO_DSCR_FEC_RMIICLK_MASK	(0xCF)
+#define GPIO_DSCR_FEC_RMIICLK(x)	(((x) & 0x03) << 4)
+#define GPIO_DSCR_FEC_RMII0_MASK	(0xF3)
+#define GPIO_DSCR_FEC_RMII0(x)		(((x) & 0x03) << 2)
+#define GPIO_DSCR_FEC_RMII1_MASK	(0xFC)
+#define GPIO_DSCR_FEC_RMII1(x)		((x) & 0x03)
+
+#define DSCR_50PF			(0x03)
+#define DSCR_30PF			(0x02)
+#define DSCR_20PF			(0x01)
+#define DSCR_10PF			(0x00)
+
+#define GPIO_PCRH_DSPI_PCS0_PULLUP_EN	(0x80)
+#define GPIO_PCRH_SIM_VEN1_PULLUP_EN	(0x40)
+#define GPIO_PCRH_SIM_VEN1_PULLUP	(0x20)
+#define GPIO_PCRH_SIM_DATA1_PULLUP_EN	(0x10)
+#define GPIO_PCRH_SIM_DATA1_PULLUP	(0x08)
+#define GPIO_PCRH_SSI_PULLUP_EN		(0x02)
+#define GPIO_PCRH_SSI_PULLUP		(0x01)
+
+#define GPIO_PCRL_SDHC_DATA3_PULLUP_EN	(0x80)
+#define GPIO_PCRL_SDHC_DATA3_PULLUP	(0x40)
+#define GPIO_PCRL_SDHC_DATA2_PULLUP_EN	(0x20)
+#define GPIO_PCRL_SDHC_DATA1_PULLUP_EN	(0x10)
+#define GPIO_PCRL_SDHC_DATA0_PULLUP_EN	(0x08)
+#define GPIO_PCRL_SDHC_CMD_PULLUP_EN	(0x04)
+
+/* *** Phase Locked Loop (PLL) *** */
+#define PLL_PCR_LOC_IRQ			(0x00040000)
+#define PLL_PCR_LOC_RE			(0x00020000)
+#define PLL_PCR_LOC_EN			(0x00010000)
+#define PLL_PCR_LOL_IRQ			(0x00004000)
+#define PLL_PCR_LOL_RE			(0x00002000)
+#define PLL_PCR_LOL_EN			(0x00001000)
+#define PLL_PCR_REFDIV_MASK		(0xFFFFF8FF)
+#define PLL_PCR_REFDIV(x)		(((x) & 0x07) << 8)
+#define PLL_PCR_FBDIV_MASK		(0xFFFFFFC0)
+#define PLL_PCR_FBDIV(x)		((x) & 0x3F)
+
+#define PLL_PDR_OUTDIV4_MASK		(0x0FFF)
+#define PLL_PDR_OUTDIV4(x)		(((x) & 0x0000000F) << 12)
+#define PLL_PDR_OUTDIV3_MASK		(0xF0FF)
+#define PLL_PDR_OUTDIV3(x)		(((x) & 0x0000000F) << 8)
+#define PLL_PDR_OUTDIV2_MASK		(0xFF0F)
+#define PLL_PDR_OUTDIV2(x)		(((x) & 0x0000000F) << 4)
+#define PLL_PDR_OUTDIV1_MASK		(0xFFF0)
+#define PLL_PDR_OUTDIV1(x)		((x) & 0x0000000F)
+#define PLL_PDR_USB(x)			PLL_PDR_OUTDIV4(x)
+#define PLL_PDR_SDRAM(x)		PLL_PDR_OUTDIV3(x)
+#define PLL_PDR_FB(x)			PLL_PDR_OUTDIV2(x)
+#define PLL_PDR_CPU(x)			PLL_PDR_OUTDIV1(x)
+
+#define PLL_PSR_LOCF			(0x00000200)
+#define PLL_PSR_LOC			(0x00000100)
+#define PLL_PSR_LOLF			(0x00000040)
+#define PLL_PSR_LOCKS			(0x00000020)
+#define PLL_PSR_LOCK			(0x00000010)
+#define PLL_PSR_MODE(x)			((x) & 0x07)
+
+/* *** Real Time Clock *** */
+#define RTC_OCEN_OSCBYP			(0x00000010)
+#define RTC_OCEN_CLKEN			(0x00000008)
+
+#endif				/* m5301x_h */
diff --git a/include/asm-m68k/m5329.h b/include/asm-m68k/m5329.h
index c1669dc..c7ebed1 100644
--- a/include/asm-m68k/m5329.h
+++ b/include/asm-m68k/m5329.h
@@ -187,65 +187,6 @@
 #define CFATR_TYPE			(0x01)
 
 /*********************************************************************
-* FlexBus Chip Selects (FBCS)
-*********************************************************************/
-/* Bit definitions and macros for FBCS_CSAR */
-#define CSAR_BA(x)			(((x)&0xFFFF)<<16)
-
-/* Bit definitions and macros for FBCS_CSMR */
-#define CSMR_BAM(x)			(((x)&0xFFFF)<<16)
-#define CSMR_BAM_4G			(0xFFFF0000)
-#define CSMR_BAM_2G			(0x7FFF0000)
-#define CSMR_BAM_1G			(0x3FFF0000)
-#define CSMR_BAM_1024M			(0x3FFF0000)
-#define CSMR_BAM_512M			(0x1FFF0000)
-#define CSMR_BAM_256M			(0x0FFF0000)
-#define CSMR_BAM_128M			(0x07FF0000)
-#define CSMR_BAM_64M			(0x03FF0000)
-#define CSMR_BAM_32M			(0x01FF0000)
-#define CSMR_BAM_16M			(0x00FF0000)
-#define CSMR_BAM_8M			(0x007F0000)
-#define CSMR_BAM_4M			(0x003F0000)
-#define CSMR_BAM_2M			(0x001F0000)
-#define CSMR_BAM_1M			(0x000F0000)
-#define CSMR_BAM_1024K			(0x000F0000)
-#define CSMR_BAM_512K			(0x00070000)
-#define CSMR_BAM_256K			(0x00030000)
-#define CSMR_BAM_128K			(0x00010000)
-#define CSMR_BAM_64K			(0x00000000)
-#define CSMR_WP				(0x00000100)
-#define CSMR_V				(0x00000001)
-
-/* Bit definitions and macros for FBCS_CSCR */
-#define CSCR_SWS(x)			(((x)&0x3F)<<26)
-#define CSCR_ASET(x)			(((x)&0x03)<<20)
-#define CSCR_SWSEN			(0x00800000)
-#define CSCR_ASET_4CLK			(0x00300000)
-#define CSCR_ASET_3CLK			(0x00200000)
-#define CSCR_ASET_2CLK			(0x00100000)
-#define CSCR_ASET_1CLK			(0x00000000)
-#define CSCR_RDAH(x)			(((x)&0x03)<<18)
-#define CSCR_RDAH_4CYC			(0x000C0000)
-#define CSCR_RDAH_3CYC			(0x00080000)
-#define CSCR_RDAH_2CYC			(0x00040000)
-#define CSCR_RDAH_1CYC			(0x00000000)
-#define CSCR_WRAH(x)			(((x)&0x03)<<16)
-#define CSCR_WDAH_4CYC			(0x00003000)
-#define CSCR_WDAH_3CYC			(0x00002000)
-#define CSCR_WDAH_2CYC			(0x00001000)
-#define CSCR_WDAH_1CYC			(0x00000000)
-#define CSCR_WS(x)			(((x)&0x3F)<<10)
-#define CSCR_SBM			(0x00000200)
-#define CSCR_AA				(0x00000100)
-#define CSCR_PS_MASK			(0x000000C0)
-#define CSCR_PS_32			(0x00000000)
-#define CSCR_PS_16			(0x00000080)
-#define CSCR_PS_8			(0x00000040)
-#define CSCR_BEM			(0x00000020)
-#define CSCR_BSTR			(0x00000010)
-#define CSCR_BSTW			(0x00000008)
-
-/*********************************************************************
 * Reset Controller Module (RCM)
 *********************************************************************/
 
@@ -261,100 +202,6 @@
 #define RCM_RSR_SOFT			(0x20)
 
 /*********************************************************************
-* FlexCAN Module (CAN)
-*********************************************************************/
-/* Bit definitions and macros for CAN_CANMCR */
-#define CANMCR_MDIS			(0x80000000)
-#define CANMCR_FRZ			(0x40000000)
-#define CANMCR_HALT			(0x10000000)
-#define CANMCR_NORDY			(0x08000000)
-#define CANMCR_SOFTRST			(0x02000000)
-#define CANMCR_FRZACK			(0x01000000)
-#define CANMCR_SUPV			(0x00800000)
-#define CANMCR_LPMACK			(0x00100000)
-#define CANMCR_MAXMB(x)			(((x)&0x0F))
-
-/* Bit definitions and macros for CAN_CANCTRL */
-#define CANCTRL_PRESDIV(x)		(((x)&0xFF)<<24)
-#define CANCTRL_RJW(x)			(((x)&0x03)<<22)
-#define CANCTRL_PSEG1(x)		(((x)&0x07)<<19)
-#define CANCTRL_PSEG2(x)		(((x)&0x07)<<16)
-#define CANCTRL_BOFFMSK			(0x00008000)
-#define CANCTRL_ERRMSK			(0x00004000)
-#define CANCTRL_CLKSRC			(0x00002000)
-#define CANCTRL_LPB			(0x00001000)
-#define CANCTRL_SMP			(0x00000080)
-#define CANCTRL_BOFFREC			(0x00000040)
-#define CANCTRL_TSYNC			(0x00000020)
-#define CANCTRL_LBUF			(0x00000010)
-#define CANCTRL_LOM			(0x00000008)
-#define CANCTRL_PROPSEG(x)		(((x)&0x07))
-
-/* Bit definitions and macros for CAN_TIMER */
-#define TIMER_TIMER(x)			((x)&0xFFFF)
-
-/* Bit definitions and macros for CAN_RXGMASK */
-#define RXGMASK_MI(x)			((x)&0x1FFFFFFF)
-
-/* Bit definitions and macros for CAN_ERRCNT */
-#define ERRCNT_TXECTR(x)		(((x)&0xFF))
-#define ERRCNT_RXECTR(x)		(((x)&0xFF)<<8)
-
-/* Bit definitions and macros for CAN_ERRSTAT */
-#define ERRSTAT_BITERR1			(0x00008000)
-#define ERRSTAT_BITERR0			(0x00004000)
-#define ERRSTAT_ACKERR			(0x00002000)
-#define ERRSTAT_CRCERR			(0x00001000)
-#define ERRSTAT_FRMERR			(0x00000800)
-#define ERRSTAT_STFERR			(0x00000400)
-#define ERRSTAT_TXWRN			(0x00000200)
-#define ERRSTAT_RXWRN			(0x00000100)
-#define ERRSTAT_IDLE			(0x00000080)
-#define ERRSTAT_TXRX			(0x00000040)
-#define ERRSTAT_FLT_BUSOFF		(0x00000020)
-#define ERRSTAT_FLT_PASSIVE		(0x00000010)
-#define ERRSTAT_FLT_ACTIVE		(0x00000000)
-#define ERRSTAT_BOFFINT			(0x00000004)
-#define ERRSTAT_ERRINT			(0x00000002)
-#define ERRSTAT_WAKINT			(0x00000001)
-
-/* Bit definitions and macros for CAN_IMASK */
-#define IMASK_BUF15M			(0x00008000)
-#define IMASK_BUF14M			(0x00004000)
-#define IMASK_BUF13M			(0x00002000)
-#define IMASK_BUF12M			(0x00001000)
-#define IMASK_BUF11M			(0x00000800)
-#define IMASK_BUF10M			(0x00000400)
-#define IMASK_BUF9M			(0x00000200)
-#define IMASK_BUF8M			(0x00000100)
-#define IMASK_BUF7M			(0x00000080)
-#define IMASK_BUF6M			(0x00000040)
-#define IMASK_BUF5M			(0x00000020)
-#define IMASK_BUF4M			(0x00000010)
-#define IMASK_BUF3M			(0x00000008)
-#define IMASK_BUF2M			(0x00000004)
-#define IMASK_BUF1M			(0x00000002)
-#define IMASK_BUF0M			(0x00000001)
-
-/* Bit definitions and macros for CAN_IFLAG */
-#define IFLAG_BUF15I			(0x00008000)
-#define IFLAG_BUF14I			(0x00004000)
-#define IFLAG_BUF13I			(0x00002000)
-#define IFLAG_BUF12I			(0x00001000)
-#define IFLAG_BUF11I			(0x00000800)
-#define IFLAG_BUF10I			(0x00000400)
-#define IFLAG_BUF9I			(0x00000200)
-#define IFLAG_BUF8I			(0x00000100)
-#define IFLAG_BUF7I			(0x00000080)
-#define IFLAG_BUF6I			(0x00000040)
-#define IFLAG_BUF5I			(0x00000020)
-#define IFLAG_BUF4I			(0x00000010)
-#define IFLAG_BUF3I			(0x00000008)
-#define IFLAG_BUF2I			(0x00000004)
-#define IFLAG_BUF1I			(0x00000002)
-#define IFLAG_BUF0I			(0x00000001)
-
-/*********************************************************************
 * Interrupt Controller (INTC)
 *********************************************************************/
 #define INTC0_EPORT			INTC_IPRL_INT1
@@ -411,200 +258,6 @@
 /* 49 - 61 Reserved */
 #define INT0_HI_SCM			(62)
 
-/* Bit definitions and macros for INTC_IPRH */
-#define INTC_IPRH_INT63			(0x80000000)
-#define INTC_IPRH_INT62			(0x40000000)
-#define INTC_IPRH_INT61			(0x20000000)
-#define INTC_IPRH_INT60			(0x10000000)
-#define INTC_IPRH_INT59			(0x08000000)
-#define INTC_IPRH_INT58			(0x04000000)
-#define INTC_IPRH_INT57			(0x02000000)
-#define INTC_IPRH_INT56			(0x01000000)
-#define INTC_IPRH_INT55			(0x00800000)
-#define INTC_IPRH_INT54			(0x00400000)
-#define INTC_IPRH_INT53			(0x00200000)
-#define INTC_IPRH_INT52			(0x00100000)
-#define INTC_IPRH_INT51			(0x00080000)
-#define INTC_IPRH_INT50			(0x00040000)
-#define INTC_IPRH_INT49			(0x00020000)
-#define INTC_IPRH_INT48			(0x00010000)
-#define INTC_IPRH_INT47			(0x00008000)
-#define INTC_IPRH_INT46			(0x00004000)
-#define INTC_IPRH_INT45			(0x00002000)
-#define INTC_IPRH_INT44			(0x00001000)
-#define INTC_IPRH_INT43			(0x00000800)
-#define INTC_IPRH_INT42			(0x00000400)
-#define INTC_IPRH_INT41			(0x00000200)
-#define INTC_IPRH_INT40			(0x00000100)
-#define INTC_IPRH_INT39			(0x00000080)
-#define INTC_IPRH_INT38			(0x00000040)
-#define INTC_IPRH_INT37			(0x00000020)
-#define INTC_IPRH_INT36			(0x00000010)
-#define INTC_IPRH_INT35			(0x00000008)
-#define INTC_IPRH_INT34			(0x00000004)
-#define INTC_IPRH_INT33			(0x00000002)
-#define INTC_IPRH_INT32			(0x00000001)
-
-/* Bit definitions and macros for INTC_IPRL */
-#define INTC_IPRL_INT31			(0x80000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT0			(0x00000001)
-
-/* Bit definitions and macros for INTC_ICONFIG */
-#define INTC_ICFG_ELVLPRI7		(0x8000)
-#define INTC_ICFG_ELVLPRI6		(0x4000)
-#define INTC_ICFG_ELVLPRI5		(0x2000)
-#define INTC_ICFG_ELVLPRI4		(0x1000)
-#define INTC_ICFG_ELVLPRI3		(0x0800)
-#define INTC_ICFG_ELVLPRI2		(0x0400)
-#define INTC_ICFG_ELVLPRI1		(0x0200)
-#define INTC_ICFG_EMASK			(0x0020)
-
-/* Bit definitions and macros for INTC_SIMR */
-#define INTC_SIMR_SALL			(0x40)
-#define INTC_SIMR_SIMR(x)		((x)&0x3F)
-
-/* Bit definitions and macros for INTC_CIMR */
-#define INTC_CIMR_CALL			(0x40)
-#define INTC_CIMR_CIMR(x)		((x)&0x3F)
-
-/* Bit definitions and macros for INTC_CLMASK */
-#define INTC_CLMASK_CLMASK(x)		((x)&0x0F)
-
-/* Bit definitions and macros for INTC_SLMASK */
-#define INTC_SLMASK_SLMASK(x)		((x)&0x0F)
-
-/* Bit definitions and macros for INTC_ICR */
-#define INTC_ICR_IL(x)			((x)&0x07)
-
-/*********************************************************************
-* Queued Serial Peripheral Interface (QSPI)
-*********************************************************************/
-/* Bit definitions and macros for QSPI_QMR */
-#define QSPI_QMR_MSTR			(0x8000)
-#define QSPI_QMR_DOHIE			(0x4000)
-#define QSPI_QMR_BITS(x)		(((x)&0x000F)<<10)
-#define QSPI_QMR_CPOL			(0x0200)
-#define QSPI_QMR_CPHA			(0x0100)
-#define QSPI_QMR_BAUD(x)		((x)&0x00FF)
-
-/* Bit definitions and macros for QSPI_QDLYR */
-#define QSPI_QDLYR_SPE			(0x8000)
-#define QSPI_QDLYR_QCD(x)		(((x)&0x007F)<<8)
-#define QSPI_QDLYR_DTL(x)		((x)&0x00FF)
-
-/* Bit definitions and macros for QSPI_QWR */
-#define QSPI_QWR_NEWQP(x)		((x)&0x000F)
-#define QSPI_QWR_ENDQP(x)		(((x)&0x000F)<<8)
-#define QSPI_QWR_CSIV			(0x1000)
-#define QSPI_QWR_WRTO			(0x2000)
-#define QSPI_QWR_WREN			(0x4000)
-#define QSPI_QWR_HALT			(0x8000)
-
-/* Bit definitions and macros for QSPI_QIR */
-#define QSPI_QIR_WCEFB			(0x8000)
-#define QSPI_QIR_ABRTB			(0x4000)
-#define QSPI_QIR_ABRTL			(0x1000)
-#define QSPI_QIR_WCEFE			(0x0800)
-#define QSPI_QIR_ABRTE			(0x0400)
-#define QSPI_QIR_SPIFE			(0x0100)
-#define QSPI_QIR_WCEF			(0x0008)
-#define QSPI_QIR_ABRT			(0x0004)
-#define QSPI_QIR_SPIF			(0x0001)
-
-/* Bit definitions and macros for QSPI_QAR */
-#define QSPI_QAR_ADDR(x)		((x)&0x003F)
-#define QSPI_QAR_TRANS			(0x0000)
-#define QSPI_QAR_RECV			(0x0010)
-#define QSPI_QAR_CMD			(0x0020)
-
-/* Bit definitions and macros for QSPI_QDR */
-#define QSPI_QDR_CONT			(0x8000)
-#define QSPI_QDR_BITSE			(0x4000)
-#define QSPI_QDR_DT			(0x2000)
-#define QSPI_QDR_DSCK			(0x1000)
-#define QSPI_QDR_QSPI_CS3		(0x0800)
-#define QSPI_QDR_QSPI_CS2		(0x0400)
-#define QSPI_QDR_QSPI_CS1		(0x0200)
-#define QSPI_QDR_QSPI_CS0		(0x0100)
-
-/*********************************************************************
-* Pulse Width Modulation (PWM)
-*********************************************************************/
-/* Bit definitions and macros for PWM_E */
-#define PWM_EN_PWME7			(0x80)
-#define PWM_EN_PWME5			(0x20)
-#define PWM_EN_PWME3			(0x08)
-#define PWM_EN_PWME1			(0x02)
-
-/* Bit definitions and macros for PWM_POL */
-#define PWM_POL_PPOL7			(0x80)
-#define PWM_POL_PPOL5			(0x20)
-#define PWM_POL_PPOL3			(0x08)
-#define PWM_POL_PPOL1			(0x02)
-
-/* Bit definitions and macros for PWM_CLK */
-#define PWM_CLK_PCLK7			(0x80)
-#define PWM_CLK_PCLK5			(0x20)
-#define PWM_CLK_PCLK3			(0x08)
-#define PWM_CLK_PCLK1			(0x02)
-
-/* Bit definitions and macros for PWM_PRCLK */
-#define PWM_PRCLK_PCKB(x)		(((x)&0x07)<<4)
-#define PWM_PRCLK_PCKA(x)		((x)&0x07)
-
-/* Bit definitions and macros for PWM_CAE */
-#define PWM_CAE_CAE7			(0x80)
-#define PWM_CAE_CAE5			(0x20)
-#define PWM_CAE_CAE3			(0x08)
-#define PWM_CAE_CAE1			(0x02)
-
-/* Bit definitions and macros for PWM_CTL */
-#define PWM_CTL_CON67			(0x80)
-#define PWM_CTL_CON45			(0x40)
-#define PWM_CTL_CON23			(0x20)
-#define PWM_CTL_CON01			(0x10)
-#define PWM_CTL_PSWAR			(0x08)
-#define PWM_CTL_PFRZ			(0x04)
-
-/* Bit definitions and macros for PWM_SDN */
-#define PWM_SDN_IF			(0x80)
-#define PWM_SDN_IE			(0x40)
-#define PWM_SDN_RESTART			(0x20)
-#define PWM_SDN_LVL			(0x10)
-#define PWM_SDN_PWM7IN			(0x04)
-#define PWM_SDN_PWM7IL			(0x02)
-#define PWM_SDN_SDNEN			(0x01)
-
 /*********************************************************************
 * Watchdog Timer Modules (WTM)
 *********************************************************************/
diff --git a/include/asm-m68k/m5445x.h b/include/asm-m68k/m5445x.h
index 7fcf4ef..5966621 100644
--- a/include/asm-m68k/m5445x.h
+++ b/include/asm-m68k/m5445x.h
@@ -114,325 +114,6 @@
 #define INT1_HI_PCI_ASR			(56)
 #define INT1_HI_PLL_LOCKS		(57)
 
-/* Bit definitions and macros for IPRH */
-#define INTC_IPRH_INT32			(0x00000001)
-#define INTC_IPRH_INT33			(0x00000002)
-#define INTC_IPRH_INT34			(0x00000004)
-#define INTC_IPRH_INT35			(0x00000008)
-#define INTC_IPRH_INT36			(0x00000010)
-#define INTC_IPRH_INT37			(0x00000020)
-#define INTC_IPRH_INT38			(0x00000040)
-#define INTC_IPRH_INT39			(0x00000080)
-#define INTC_IPRH_INT40			(0x00000100)
-#define INTC_IPRH_INT41			(0x00000200)
-#define INTC_IPRH_INT42			(0x00000400)
-#define INTC_IPRH_INT43			(0x00000800)
-#define INTC_IPRH_INT44			(0x00001000)
-#define INTC_IPRH_INT45			(0x00002000)
-#define INTC_IPRH_INT46			(0x00004000)
-#define INTC_IPRH_INT47			(0x00008000)
-#define INTC_IPRH_INT48			(0x00010000)
-#define INTC_IPRH_INT49			(0x00020000)
-#define INTC_IPRH_INT50			(0x00040000)
-#define INTC_IPRH_INT51			(0x00080000)
-#define INTC_IPRH_INT52			(0x00100000)
-#define INTC_IPRH_INT53			(0x00200000)
-#define INTC_IPRH_INT54			(0x00400000)
-#define INTC_IPRH_INT55			(0x00800000)
-#define INTC_IPRH_INT56			(0x01000000)
-#define INTC_IPRH_INT57			(0x02000000)
-#define INTC_IPRH_INT58			(0x04000000)
-#define INTC_IPRH_INT59			(0x08000000)
-#define INTC_IPRH_INT60			(0x10000000)
-#define INTC_IPRH_INT61			(0x20000000)
-#define INTC_IPRH_INT62			(0x40000000)
-#define INTC_IPRH_INT63			(0x80000000)
-
-/* Bit definitions and macros for IPRL */
-#define INTC_IPRL_INT0			(0x00000001)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT31			(0x80000000)
-
-/* Bit definitions and macros for IMRH */
-#define INTC_IMRH_INT_MASK32		(0x00000001)
-#define INTC_IMRH_INT_MASK33		(0x00000002)
-#define INTC_IMRH_INT_MASK34		(0x00000004)
-#define INTC_IMRH_INT_MASK35		(0x00000008)
-#define INTC_IMRH_INT_MASK36		(0x00000010)
-#define INTC_IMRH_INT_MASK37		(0x00000020)
-#define INTC_IMRH_INT_MASK38		(0x00000040)
-#define INTC_IMRH_INT_MASK39		(0x00000080)
-#define INTC_IMRH_INT_MASK40		(0x00000100)
-#define INTC_IMRH_INT_MASK41		(0x00000200)
-#define INTC_IMRH_INT_MASK42		(0x00000400)
-#define INTC_IMRH_INT_MASK43		(0x00000800)
-#define INTC_IMRH_INT_MASK44		(0x00001000)
-#define INTC_IMRH_INT_MASK45		(0x00002000)
-#define INTC_IMRH_INT_MASK46		(0x00004000)
-#define INTC_IMRH_INT_MASK47		(0x00008000)
-#define INTC_IMRH_INT_MASK48		(0x00010000)
-#define INTC_IMRH_INT_MASK49		(0x00020000)
-#define INTC_IMRH_INT_MASK50		(0x00040000)
-#define INTC_IMRH_INT_MASK51		(0x00080000)
-#define INTC_IMRH_INT_MASK52		(0x00100000)
-#define INTC_IMRH_INT_MASK53		(0x00200000)
-#define INTC_IMRH_INT_MASK54		(0x00400000)
-#define INTC_IMRH_INT_MASK55		(0x00800000)
-#define INTC_IMRH_INT_MASK56		(0x01000000)
-#define INTC_IMRH_INT_MASK57		(0x02000000)
-#define INTC_IMRH_INT_MASK58		(0x04000000)
-#define INTC_IMRH_INT_MASK59		(0x08000000)
-#define INTC_IMRH_INT_MASK60		(0x10000000)
-#define INTC_IMRH_INT_MASK61		(0x20000000)
-#define INTC_IMRH_INT_MASK62		(0x40000000)
-#define INTC_IMRH_INT_MASK63		(0x80000000)
-
-/* Bit definitions and macros for IMRL */
-#define INTC_IMRL_INT_MASK0		(0x00000001)
-#define INTC_IMRL_INT_MASK1		(0x00000002)
-#define INTC_IMRL_INT_MASK2		(0x00000004)
-#define INTC_IMRL_INT_MASK3		(0x00000008)
-#define INTC_IMRL_INT_MASK4		(0x00000010)
-#define INTC_IMRL_INT_MASK5		(0x00000020)
-#define INTC_IMRL_INT_MASK6		(0x00000040)
-#define INTC_IMRL_INT_MASK7		(0x00000080)
-#define INTC_IMRL_INT_MASK8		(0x00000100)
-#define INTC_IMRL_INT_MASK9		(0x00000200)
-#define INTC_IMRL_INT_MASK10		(0x00000400)
-#define INTC_IMRL_INT_MASK11		(0x00000800)
-#define INTC_IMRL_INT_MASK12		(0x00001000)
-#define INTC_IMRL_INT_MASK13		(0x00002000)
-#define INTC_IMRL_INT_MASK14		(0x00004000)
-#define INTC_IMRL_INT_MASK15		(0x00008000)
-#define INTC_IMRL_INT_MASK16		(0x00010000)
-#define INTC_IMRL_INT_MASK17		(0x00020000)
-#define INTC_IMRL_INT_MASK18		(0x00040000)
-#define INTC_IMRL_INT_MASK19		(0x00080000)
-#define INTC_IMRL_INT_MASK20		(0x00100000)
-#define INTC_IMRL_INT_MASK21		(0x00200000)
-#define INTC_IMRL_INT_MASK22		(0x00400000)
-#define INTC_IMRL_INT_MASK23		(0x00800000)
-#define INTC_IMRL_INT_MASK24		(0x01000000)
-#define INTC_IMRL_INT_MASK25		(0x02000000)
-#define INTC_IMRL_INT_MASK26		(0x04000000)
-#define INTC_IMRL_INT_MASK27		(0x08000000)
-#define INTC_IMRL_INT_MASK28		(0x10000000)
-#define INTC_IMRL_INT_MASK29		(0x20000000)
-#define INTC_IMRL_INT_MASK30		(0x40000000)
-#define INTC_IMRL_INT_MASK31		(0x80000000)
-
-/* Bit definitions and macros for INTFRCH */
-#define INTC_INTFRCH_INTFRC32		(0x00000001)
-#define INTC_INTFRCH_INTFRC33		(0x00000002)
-#define INTC_INTFRCH_INTFRC34		(0x00000004)
-#define INTC_INTFRCH_INTFRC35		(0x00000008)
-#define INTC_INTFRCH_INTFRC36		(0x00000010)
-#define INTC_INTFRCH_INTFRC37		(0x00000020)
-#define INTC_INTFRCH_INTFRC38		(0x00000040)
-#define INTC_INTFRCH_INTFRC39		(0x00000080)
-#define INTC_INTFRCH_INTFRC40		(0x00000100)
-#define INTC_INTFRCH_INTFRC41		(0x00000200)
-#define INTC_INTFRCH_INTFRC42		(0x00000400)
-#define INTC_INTFRCH_INTFRC43		(0x00000800)
-#define INTC_INTFRCH_INTFRC44		(0x00001000)
-#define INTC_INTFRCH_INTFRC45		(0x00002000)
-#define INTC_INTFRCH_INTFRC46		(0x00004000)
-#define INTC_INTFRCH_INTFRC47		(0x00008000)
-#define INTC_INTFRCH_INTFRC48		(0x00010000)
-#define INTC_INTFRCH_INTFRC49		(0x00020000)
-#define INTC_INTFRCH_INTFRC50		(0x00040000)
-#define INTC_INTFRCH_INTFRC51		(0x00080000)
-#define INTC_INTFRCH_INTFRC52		(0x00100000)
-#define INTC_INTFRCH_INTFRC53		(0x00200000)
-#define INTC_INTFRCH_INTFRC54		(0x00400000)
-#define INTC_INTFRCH_INTFRC55		(0x00800000)
-#define INTC_INTFRCH_INTFRC56		(0x01000000)
-#define INTC_INTFRCH_INTFRC57		(0x02000000)
-#define INTC_INTFRCH_INTFRC58		(0x04000000)
-#define INTC_INTFRCH_INTFRC59		(0x08000000)
-#define INTC_INTFRCH_INTFRC60		(0x10000000)
-#define INTC_INTFRCH_INTFRC61		(0x20000000)
-#define INTC_INTFRCH_INTFRC62		(0x40000000)
-#define INTC_INTFRCH_INTFRC63		(0x80000000)
-
-/* Bit definitions and macros for INTFRCL */
-#define INTC_INTFRCL_INTFRC0		(0x00000001)
-#define INTC_INTFRCL_INTFRC1		(0x00000002)
-#define INTC_INTFRCL_INTFRC2		(0x00000004)
-#define INTC_INTFRCL_INTFRC3		(0x00000008)
-#define INTC_INTFRCL_INTFRC4		(0x00000010)
-#define INTC_INTFRCL_INTFRC5		(0x00000020)
-#define INTC_INTFRCL_INTFRC6		(0x00000040)
-#define INTC_INTFRCL_INTFRC7		(0x00000080)
-#define INTC_INTFRCL_INTFRC8		(0x00000100)
-#define INTC_INTFRCL_INTFRC9		(0x00000200)
-#define INTC_INTFRCL_INTFRC10		(0x00000400)
-#define INTC_INTFRCL_INTFRC11		(0x00000800)
-#define INTC_INTFRCL_INTFRC12		(0x00001000)
-#define INTC_INTFRCL_INTFRC13		(0x00002000)
-#define INTC_INTFRCL_INTFRC14		(0x00004000)
-#define INTC_INTFRCL_INTFRC15		(0x00008000)
-#define INTC_INTFRCL_INTFRC16		(0x00010000)
-#define INTC_INTFRCL_INTFRC17		(0x00020000)
-#define INTC_INTFRCL_INTFRC18		(0x00040000)
-#define INTC_INTFRCL_INTFRC19		(0x00080000)
-#define INTC_INTFRCL_INTFRC20		(0x00100000)
-#define INTC_INTFRCL_INTFRC21		(0x00200000)
-#define INTC_INTFRCL_INTFRC22		(0x00400000)
-#define INTC_INTFRCL_INTFRC23		(0x00800000)
-#define INTC_INTFRCL_INTFRC24		(0x01000000)
-#define INTC_INTFRCL_INTFRC25		(0x02000000)
-#define INTC_INTFRCL_INTFRC26		(0x04000000)
-#define INTC_INTFRCL_INTFRC27		(0x08000000)
-#define INTC_INTFRCL_INTFRC28		(0x10000000)
-#define INTC_INTFRCL_INTFRC29		(0x20000000)
-#define INTC_INTFRCL_INTFRC30		(0x40000000)
-#define INTC_INTFRCL_INTFRC31		(0x80000000)
-
-/* Bit definitions and macros for ICONFIG */
-#define INTC_ICONFIG_EMASK		(0x0020)
-#define INTC_ICONFIG_ELVLPRI1		(0x0200)
-#define INTC_ICONFIG_ELVLPRI2		(0x0400)
-#define INTC_ICONFIG_ELVLPRI3		(0x0800)
-#define INTC_ICONFIG_ELVLPRI4		(0x1000)
-#define INTC_ICONFIG_ELVLPRI5		(0x2000)
-#define INTC_ICONFIG_ELVLPRI6		(0x4000)
-#define INTC_ICONFIG_ELVLPRI7		(0x8000)
-
-/* Bit definitions and macros for SIMR */
-#define INTC_SIMR_SIMR(x)		(((x)&0x7F))
-
-/* Bit definitions and macros for CIMR */
-#define INTC_CIMR_CIMR(x)		(((x)&0x7F))
-
-/* Bit definitions and macros for CLMASK */
-#define INTC_CLMASK_CLMASK(x)		(((x)&0x0F))
-
-/* Bit definitions and macros for SLMASK */
-#define INTC_SLMASK_SLMASK(x)		(((x)&0x0F))
-
-/* Bit definitions and macros for ICR group */
-#define INTC_ICR_IL(x)			(((x)&0x07))
-
-/*********************************************************************
-* Edge Port Module (EPORT)
-*********************************************************************/
-
-/* Bit definitions and macros for EPPAR */
-#define EPORT_EPPAR_EPPA1(x)		(((x)&0x0003)<<2)
-#define EPORT_EPPAR_EPPA2(x)		(((x)&0x0003)<<4)
-#define EPORT_EPPAR_EPPA3(x)		(((x)&0x0003)<<6)
-#define EPORT_EPPAR_EPPA4(x)		(((x)&0x0003)<<8)
-#define EPORT_EPPAR_EPPA5(x)		(((x)&0x0003)<<10)
-#define EPORT_EPPAR_EPPA6(x)		(((x)&0x0003)<<12)
-#define EPORT_EPPAR_EPPA7(x)		(((x)&0x0003)<<14)
-#define EPORT_EPPAR_LEVEL		(0)
-#define EPORT_EPPAR_RISING		(1)
-#define EPORT_EPPAR_FALLING		(2)
-#define EPORT_EPPAR_BOTH		(3)
-#define EPORT_EPPAR_EPPA7_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA7_RISING	(0x4000)
-#define EPORT_EPPAR_EPPA7_FALLING	(0x8000)
-#define EPORT_EPPAR_EPPA7_BOTH		(0xC000)
-#define EPORT_EPPAR_EPPA6_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA6_RISING	(0x1000)
-#define EPORT_EPPAR_EPPA6_FALLING	(0x2000)
-#define EPORT_EPPAR_EPPA6_BOTH		(0x3000)
-#define EPORT_EPPAR_EPPA5_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA5_RISING	(0x0400)
-#define EPORT_EPPAR_EPPA5_FALLING	(0x0800)
-#define EPORT_EPPAR_EPPA5_BOTH		(0x0C00)
-#define EPORT_EPPAR_EPPA4_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA4_RISING	(0x0100)
-#define EPORT_EPPAR_EPPA4_FALLING	(0x0200)
-#define EPORT_EPPAR_EPPA4_BOTH		(0x0300)
-#define EPORT_EPPAR_EPPA3_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA3_RISING	(0x0040)
-#define EPORT_EPPAR_EPPA3_FALLING	(0x0080)
-#define EPORT_EPPAR_EPPA3_BOTH		(0x00C0)
-#define EPORT_EPPAR_EPPA2_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA2_RISING	(0x0010)
-#define EPORT_EPPAR_EPPA2_FALLING	(0x0020)
-#define EPORT_EPPAR_EPPA2_BOTH		(0x0030)
-#define EPORT_EPPAR_EPPA1_LEVEL		(0x0000)
-#define EPORT_EPPAR_EPPA1_RISING	(0x0004)
-#define EPORT_EPPAR_EPPA1_FALLING	(0x0008)
-#define EPORT_EPPAR_EPPA1_BOTH		(0x000C)
-
-/* Bit definitions and macros for EPDDR */
-#define EPORT_EPDDR_EPDD1		(0x02)
-#define EPORT_EPDDR_EPDD2		(0x04)
-#define EPORT_EPDDR_EPDD3		(0x08)
-#define EPORT_EPDDR_EPDD4		(0x10)
-#define EPORT_EPDDR_EPDD5		(0x20)
-#define EPORT_EPDDR_EPDD6		(0x40)
-#define EPORT_EPDDR_EPDD7		(0x80)
-
-/* Bit definitions and macros for EPIER */
-#define EPORT_EPIER_EPIE1		(0x02)
-#define EPORT_EPIER_EPIE2		(0x04)
-#define EPORT_EPIER_EPIE3		(0x08)
-#define EPORT_EPIER_EPIE4		(0x10)
-#define EPORT_EPIER_EPIE5		(0x20)
-#define EPORT_EPIER_EPIE6		(0x40)
-#define EPORT_EPIER_EPIE7		(0x80)
-
-/* Bit definitions and macros for EPDR */
-#define EPORT_EPDR_EPD1			(0x02)
-#define EPORT_EPDR_EPD2			(0x04)
-#define EPORT_EPDR_EPD3			(0x08)
-#define EPORT_EPDR_EPD4			(0x10)
-#define EPORT_EPDR_EPD5			(0x20)
-#define EPORT_EPDR_EPD6			(0x40)
-#define EPORT_EPDR_EPD7			(0x80)
-
-/* Bit definitions and macros for EPPDR */
-#define EPORT_EPPDR_EPPD1		(0x02)
-#define EPORT_EPPDR_EPPD2		(0x04)
-#define EPORT_EPPDR_EPPD3		(0x08)
-#define EPORT_EPPDR_EPPD4		(0x10)
-#define EPORT_EPPDR_EPPD5		(0x20)
-#define EPORT_EPPDR_EPPD6		(0x40)
-#define EPORT_EPPDR_EPPD7		(0x80)
-
-/* Bit definitions and macros for EPFR */
-#define EPORT_EPFR_EPF1			(0x02)
-#define EPORT_EPFR_EPF2			(0x04)
-#define EPORT_EPFR_EPF3			(0x08)
-#define EPORT_EPFR_EPF4			(0x10)
-#define EPORT_EPFR_EPF5			(0x20)
-#define EPORT_EPFR_EPF6			(0x40)
-#define EPORT_EPFR_EPF7			(0x80)
-
 /*********************************************************************
 * Watchdog Timer Modules (WTM)
 *********************************************************************/
@@ -1040,24 +721,6 @@
 #define GPIO_DSCR_ATA_ATA_LOAD_10PF	(0x00)
 
 /*********************************************************************
-* Random Number Generator (RNG)
-*********************************************************************/
-
-/* Bit definitions and macros for RNGCR */
-#define RNG_RNGCR_GO			(0x00000001)
-#define RNG_RNGCR_HA			(0x00000002)
-#define RNG_RNGCR_IM			(0x00000004)
-#define RNG_RNGCR_CI			(0x00000008)
-
-/* Bit definitions and macros for RNGSR */
-#define RNG_RNGSR_SV			(0x00000001)
-#define RNG_RNGSR_LRS			(0x00000002)
-#define RNG_RNGSR_FUF			(0x00000004)
-#define RNG_RNGSR_EI			(0x00000008)
-#define RNG_RNGSR_OFL(x)		(((x)&0x000000FF)<<8)
-#define RNG_RNGSR_OFS(x)		(((x)&0x000000FF)<<16)
-
-/*********************************************************************
 * SDRAM Controller (SDRAMC)
 *********************************************************************/
 
diff --git a/include/asm-m68k/m547x_8x.h b/include/asm-m68k/m547x_8x.h
index 2db8df2..23cee8e 100644
--- a/include/asm-m68k/m547x_8x.h
+++ b/include/asm-m68k/m547x_8x.h
@@ -305,74 +305,6 @@
 #define INT0_HI_GPT1			(61)
 #define INT0_HI_GPT0			(62)
 
-/* Bit definitions and macros for IPRH */
-#define INTC_IPRH_INT32			(0x00000001)
-#define INTC_IPRH_INT33			(0x00000002)
-#define INTC_IPRH_INT34			(0x00000004)
-#define INTC_IPRH_INT35			(0x00000008)
-#define INTC_IPRH_INT36			(0x00000010)
-#define INTC_IPRH_INT37			(0x00000020)
-#define INTC_IPRH_INT38			(0x00000040)
-#define INTC_IPRH_INT39			(0x00000080)
-#define INTC_IPRH_INT40			(0x00000100)
-#define INTC_IPRH_INT41			(0x00000200)
-#define INTC_IPRH_INT42			(0x00000400)
-#define INTC_IPRH_INT43			(0x00000800)
-#define INTC_IPRH_INT44			(0x00001000)
-#define INTC_IPRH_INT45			(0x00002000)
-#define INTC_IPRH_INT46			(0x00004000)
-#define INTC_IPRH_INT47			(0x00008000)
-#define INTC_IPRH_INT48			(0x00010000)
-#define INTC_IPRH_INT49			(0x00020000)
-#define INTC_IPRH_INT50			(0x00040000)
-#define INTC_IPRH_INT51			(0x00080000)
-#define INTC_IPRH_INT52			(0x00100000)
-#define INTC_IPRH_INT53			(0x00200000)
-#define INTC_IPRH_INT54			(0x00400000)
-#define INTC_IPRH_INT55			(0x00800000)
-#define INTC_IPRH_INT56			(0x01000000)
-#define INTC_IPRH_INT57			(0x02000000)
-#define INTC_IPRH_INT58			(0x04000000)
-#define INTC_IPRH_INT59			(0x08000000)
-#define INTC_IPRH_INT60			(0x10000000)
-#define INTC_IPRH_INT61			(0x20000000)
-#define INTC_IPRH_INT62			(0x40000000)
-#define INTC_IPRH_INT63			(0x80000000)
-
-/* Bit definitions and macros for IPRL */
-#define INTC_IPRL_INT0			(0x00000001)
-#define INTC_IPRL_INT1			(0x00000002)
-#define INTC_IPRL_INT2			(0x00000004)
-#define INTC_IPRL_INT3			(0x00000008)
-#define INTC_IPRL_INT4			(0x00000010)
-#define INTC_IPRL_INT5			(0x00000020)
-#define INTC_IPRL_INT6			(0x00000040)
-#define INTC_IPRL_INT7			(0x00000080)
-#define INTC_IPRL_INT8			(0x00000100)
-#define INTC_IPRL_INT9			(0x00000200)
-#define INTC_IPRL_INT10			(0x00000400)
-#define INTC_IPRL_INT11			(0x00000800)
-#define INTC_IPRL_INT12			(0x00001000)
-#define INTC_IPRL_INT13			(0x00002000)
-#define INTC_IPRL_INT14			(0x00004000)
-#define INTC_IPRL_INT15			(0x00008000)
-#define INTC_IPRL_INT16			(0x00010000)
-#define INTC_IPRL_INT17			(0x00020000)
-#define INTC_IPRL_INT18			(0x00040000)
-#define INTC_IPRL_INT19			(0x00080000)
-#define INTC_IPRL_INT20			(0x00100000)
-#define INTC_IPRL_INT21			(0x00200000)
-#define INTC_IPRL_INT22			(0x00400000)
-#define INTC_IPRL_INT23			(0x00800000)
-#define INTC_IPRL_INT24			(0x01000000)
-#define INTC_IPRL_INT25			(0x02000000)
-#define INTC_IPRL_INT26			(0x04000000)
-#define INTC_IPRL_INT27			(0x08000000)
-#define INTC_IPRL_INT28			(0x10000000)
-#define INTC_IPRL_INT29			(0x20000000)
-#define INTC_IPRL_INT30			(0x40000000)
-#define INTC_IPRL_INT31			(0x80000000)
-
 /*********************************************************************
 * General Purpose Timers (GPTMR)
 *********************************************************************/
diff --git a/include/configs/EB+MCF-EV123.h b/include/configs/EB+MCF-EV123.h
index 876ec20..a13db7c 100644
--- a/include/configs/EB+MCF-EV123.h
+++ b/include/configs/EB+MCF-EV123.h
@@ -178,7 +178,7 @@
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_SDRAM_BASE1
 #define	CONFIG_SYS_SDRAM_SIZE		CONFIG_SYS_SDRAM_SIZE1
 
-#define CONFIG_SYS_FLASH_BASE		0xFFE00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 #define	CONFIG_SYS_INT_FLASH_BASE	0xF0000000
 #define CONFIG_SYS_INT_FLASH_ENABLE	0x21
 
@@ -218,17 +218,13 @@
  * Memory bank definitions
  */
 
-#define CONFIG_SYS_CS0_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE		2*1024*1024
-#define CONFIG_SYS_CS0_WIDTH		16
-#define CONFIG_SYS_CS0_RO		0
-#define CONFIG_SYS_CS0_WS		6
+#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x001F0001
 
 #define CONFIG_SYS_CS3_BASE		0xE0000000
-#define CONFIG_SYS_CS3_SIZE		1*1024*1024
-#define CONFIG_SYS_CS3_WIDTH		16
-#define CONFIG_SYS_CS3_RO		0
-#define CONFIG_SYS_CS3_WS		6
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS3_MASK		0x000F0001
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/M52277EVB.h b/include/configs/M52277EVB.h
index b6226c6..5d5966f 100644
--- a/include/configs/M52277EVB.h
+++ b/include/configs/M52277EVB.h
@@ -40,7 +40,7 @@
 
 #define CONFIG_MCFUART
 #define CONFIG_SYS_UART_PORT		(0)
-#define CONFIG_BAUDRATE		115200
+#define CONFIG_BAUDRATE			115200
 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
 
 #undef CONFIG_WATCHDOG
@@ -72,21 +72,50 @@
 #define CONFIG_CMD_REGINFO
 #undef CONFIG_CMD_USB
 #undef CONFIG_CMD_BMP
+#define CONFIG_CMD_SPI
+#define CONFIG_CMD_SF
 
-#define CONFIG_HOSTNAME		M52277EVB
+#define CONFIG_HOSTNAME			M52277EVB
+#define CONFIG_SYS_UBOOT_END		0x3FFFF
+#define	CONFIG_SYS_LOAD_ADDR2		0x40010007
+#ifdef CONFIG_SYS_STMICRO_BOOT
+/* ST Micro serial flash */
 #define CONFIG_EXTRA_ENV_SETTINGS		\
 	"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
-	"loadaddr=" MK_STR(CONFIG_SYS_LOAD_ADDR) "\0"	\
-	"u-boot=u-boot.bin\0"			\
-	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"loadaddr=0x40010000\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=loadb ${loadaddr} ${baudrate};"	\
+	"loadb " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"	\
 	"upd=run load; run prog\0"		\
-	"prog=prot off 0 0x3ffff;"		\
-	"era 0 3ffff;"				\
-	"cp.b ${loadaddr} 0 ${filesize};"	\
+	"prog=sf probe 0:2 10000 1;"		\
+	"sf erase 0 30000;"			\
+	"sf write ${loadaddr} 0 30000;"		\
 	"save\0"				\
 	""
+#endif
+#ifdef CONFIG_SYS_SPANSION_BOOT
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"inpclk=" MK_STR(CONFIG_SYS_INPUT_CLKSRC) "\0"	\
+	"loadaddr=0x40010000\0"			\
+	"uboot=u-boot.bin\0"			\
+	"load=loadb ${loadaddr} ${baudrate}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off " MK_STR(CONFIG_SYS_FLASH_BASE)	\
+	" " MK_STR(CONFIG_SYS_UBOOT_END) ";"		\
+	"era " MK_STR(CONFIG_SYS_FLASH_BASE) " "	\
+	MK_STR(CONFIG_SYS_UBOOT_END) ";"		\
+	"cp.b ${loadaddr} " MK_STR(CONFIG_SYS_FLASH_BASE)	\
+	" ${filesize}; save\0"			\
+	"updsbf=run loadsbf; run progsbf\0"	\
+	"loadsbf=loadb ${loadaddr} ${baudrate};"	\
+	"loadb " MK_STR(CONFIG_SYS_LOAD_ADDR2) " ${baudrate} \0"	\
+	"progsbf=sf probe 0:2 10000 1;"		\
+	"sf erase 0 30000;"			\
+	"sf write ${loadaddr} 0 30000;"		\
+	""
+#endif
 
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds */
+#define CONFIG_BOOTDELAY		3	/* autoboot after 3 seconds */
 /* LCD */
 #ifdef CONFIG_CMD_BMP
 #define CONFIG_LCD
@@ -102,7 +131,7 @@
 #define CONFIG_DOS_PARTITION
 #define CONFIG_MAC_PARTITION
 #define CONFIG_ISO_PARTITION
-#define CONFIG_SYS_USB_EHCI_REGS_BASE		0xFC0B0000
+#define CONFIG_SYS_USB_EHCI_REGS_BASE	0xFC0B0000
 #define CONFIG_SYS_USB_EHCI_CPU_INIT
 #endif
 
@@ -122,30 +151,53 @@
 #define CONFIG_SYS_I2C_SPEED		80000	/* I2C speed and slave address  */
 #define CONFIG_SYS_I2C_SLAVE		0x7F
 #define CONFIG_SYS_I2C_OFFSET		0x58000
-#define CONFIG_SYS_IMMR		CONFIG_SYS_MBAR
+#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
+
+/* DSPI and Serial Flash */
+#define CONFIG_CF_DSPI
+#define CONFIG_HARD_SPI
+#define CONFIG_SYS_SER_FLASH_BASE	0x01000000
+#define CONFIG_SYS_SBFHDR_SIZE		0x7
+#ifdef CONFIG_CMD_SPI
+#	define CONFIG_SYS_DSPI_CS2
+#	define CONFIG_SPI_FLASH
+#	define CONFIG_SPI_FLASH_STMICRO
+
+#	define CONFIG_SYS_DSPI_DCTAR0	(DSPI_DCTAR_TRSZ(7) | \
+					 DSPI_DCTAR_CPOL | \
+					 DSPI_DCTAR_CPHA | \
+					 DSPI_DCTAR_PCSSCK_1CLK | \
+					 DSPI_DCTAR_PASC(0) | \
+					 DSPI_DCTAR_PDT(0) | \
+					 DSPI_DCTAR_CSSCK(0) | \
+					 DSPI_DCTAR_ASC(0) | \
+					 DSPI_DCTAR_PBR(0) | \
+					 DSPI_DCTAR_DT(1) | \
+					 DSPI_DCTAR_BR(1))
+#endif
 
 /* Input, PCI, Flexbus, and VCO */
 #define CONFIG_EXTRA_CLOCK
 
 #define CONFIG_SYS_INPUT_CLKSRC	16000000
 
-#define CONFIG_PRAM		512	/* 512 KB */
+#define CONFIG_PRAM		2048	/* 2048 KB */
 
-#define CONFIG_SYS_PROMPT		"-> "
+#define CONFIG_SYS_PROMPT	"-> "
 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
 
 #if defined(CONFIG_CMD_KGDB)
-#define CONFIG_SYS_CBSIZE		1024	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
 #else
-#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
+#define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
 #endif
-#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
-#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
-#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16	/* max number of command args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size    */
 
-#define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x10000)
+#define CONFIG_SYS_LOAD_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x10000)
 
-#define CONFIG_SYS_HZ			1000
+#define CONFIG_SYS_HZ		1000
 
 #define CONFIG_SYS_MBAR		0xFC000000
 
@@ -155,17 +207,18 @@
  * You should know what you are doing if you make changes here.
  */
 
-/*-----------------------------------------------------------------------
+/*
  * Definitions for initial stack pointer and data area (in DPRAM)
  */
 #define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
-#define CONFIG_SYS_INIT_RAM_END	0x8000	/* End of used area in internal SRAM */
-#define CONFIG_SYS_INIT_RAM_CTRL	0x21
+#define CONFIG_SYS_INIT_RAM_END		0x8000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x221
 #define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 16)
-#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 32)
+#define CONFIG_SYS_INIT_SP_OFFSET	(CONFIG_SYS_GBL_DATA_OFFSET - 32)
+#define CONFIG_SYS_SBFHDR_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_END - 32)
 
-/*-----------------------------------------------------------------------
+/*
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
@@ -177,11 +230,16 @@
 #define CONFIG_SYS_SDRAM_CTRL		0xE1092000
 #define CONFIG_SYS_SDRAM_EMOD		0x81810000
 #define CONFIG_SYS_SDRAM_MODE		0x00CD0000
+#define CONFIG_SYS_SDRAM_DRV_STRENGTH	0x00
 
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
 #define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
 
-#define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#ifdef CONFIG_CF_SBF
+#	define CONFIG_SYS_MONITOR_BASE	(TEXT_BASE + 0x400)
+#else
+#	define CONFIG_SYS_MONITOR_BASE	(CONFIG_SYS_FLASH_BASE + 0x400)
+#endif
 #define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
 #define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
 #define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
@@ -189,24 +247,40 @@
 /* Initial Memory map for Linux */
 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
-/* Configuration for environment
+/*
+ * Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
  */
-#define CONFIG_ENV_IS_IN_FLASH	1
-#define CONFIG_ENV_OVERWRITE	1
+#ifdef CONFIG_CF_SBF
+#	define CONFIG_ENV_IS_IN_SPI_FLASH
+#	define CONFIG_ENV_SPI_CS	2
+#else
+#	define CONFIG_ENV_IS_IN_FLASH	1
+#endif
+#define CONFIG_ENV_OVERWRITE		1
 #undef CONFIG_ENV_IS_EMBEDDED
 
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
-#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
-#define CONFIG_SYS_FLASH0_BASE		CONFIG_SYS_CS0_BASE
-#define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x8000)
-#define CONFIG_ENV_SECT_SIZE	0x8000
+#ifdef CONFIG_SYS_STMICRO_BOOT
+#	define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_SER_FLASH_BASE
+#	define CONFIG_SYS_FLASH0_BASE	CONFIG_SYS_SER_FLASH_BASE
+#	define CONFIG_SYS_FLASH1_BASE	CONFIG_SYS_CS0_BASE
+#	define CONFIG_ENV_OFFSET	0x30000
+#	define CONFIG_ENV_SIZE		0x1000
+#	define CONFIG_ENV_SECT_SIZE	0x10000
+#endif
+#ifdef CONFIG_SYS_SPANSION_BOOT
+#	define CONFIG_SYS_FLASH_BASE	CONFIG_SYS_CS0_BASE
+#	define CONFIG_SYS_FLASH0_BASE	CONFIG_SYS_CS0_BASE
+#	define CONFIG_ENV_ADDR		(CONFIG_SYS_FLASH_BASE + 0x8000)
+#	define CONFIG_ENV_SIZE		0x1000
+#	define CONFIG_ENV_SECT_SIZE	0x8000
+#endif
 
 #define CONFIG_SYS_FLASH_CFI
 #ifdef CONFIG_SYS_FLASH_CFI
-
 #	define CONFIG_FLASH_CFI_DRIVER	1
 #	define CONFIG_SYS_FLASH_SIZE		0x1000000	/* Max size that the board might have */
 #	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
@@ -214,6 +288,7 @@
 #	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
 #	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 #	define CONFIG_SYS_FLASH_CHECKSUM
+#	define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_CS0_BASE }
 #endif
 
 /*
@@ -229,7 +304,7 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CONFIG_SYS_CACHELINE_SIZE		16
+#define CONFIG_SYS_CACHELINE_SIZE	16
 
 /*-----------------------------------------------------------------------
  * Memory bank definitions
@@ -243,8 +318,14 @@
  * CS5 - Available
  */
 
+#ifdef CONFIG_CF_SBF
+#define CONFIG_SYS_CS0_BASE		0x04000000
+#define CONFIG_SYS_CS0_MASK		0x00FF0001
+#define CONFIG_SYS_CS0_CTRL		0x00001FA0
+#else
 #define CONFIG_SYS_CS0_BASE		0x00000000
 #define CONFIG_SYS_CS0_MASK		0x00FF0001
 #define CONFIG_SYS_CS0_CTRL		0x00001FA0
+#endif
 
 #endif				/* _M52277EVB_H */
diff --git a/include/configs/M5235EVB.h b/include/configs/M5235EVB.h
index e6c87ef..8c66f87 100644
--- a/include/configs/M5235EVB.h
+++ b/include/configs/M5235EVB.h
@@ -215,7 +215,7 @@
 #	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
 #endif
 
-#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE << 16)
+#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
 
 /* Configuration for environment
  * Environment is embedded in u-boot in the second sector of the flash
@@ -251,13 +251,13 @@
  * CS7 - Available
  */
 #ifdef NORFLASH_PS32BIT
-#	define CONFIG_SYS_CS0_BASE	0xFFC0
+#	define CONFIG_SYS_CS0_BASE	0xFFC00000
 #	define CONFIG_SYS_CS0_MASK	0x003f0001
-#	define CONFIG_SYS_CS0_CTRL	0x1D00
+#	define CONFIG_SYS_CS0_CTRL	0x00001D00
 #else
-#	define CONFIG_SYS_CS0_BASE	0xFFE0
+#	define CONFIG_SYS_CS0_BASE	0xFFE00000
 #	define CONFIG_SYS_CS0_MASK	0x001f0001
-#	define CONFIG_SYS_CS0_CTRL	0x1D80
+#	define CONFIG_SYS_CS0_CTRL	0x00001D80
 #endif
 
 #endif				/* _M5329EVB_H */
diff --git a/include/configs/M5249EVB.h b/include/configs/M5249EVB.h
index 8699ef9..e3830e5 100644
--- a/include/configs/M5249EVB.h
+++ b/include/configs/M5249EVB.h
@@ -125,7 +125,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CSAR0 << 16)
+#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
 
 #if 0 /* test-only */
 #define CONFIG_PRAM		512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
@@ -170,15 +170,15 @@
  */
 
 /* CS0 - AMD Flash, address 0xffc00000 */
-#define	CONFIG_SYS_CSAR0		0xffe0
-#define	CONFIG_SYS_CSCR0		0x1980		/* WS=0110, AA=1, PS=10         */
+#define	CONFIG_SYS_CS0_BASE		0xffe00000
+#define	CONFIG_SYS_CS0_CTRL		0x00001980	/* WS=0110, AA=1, PS=10         */
 /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/
-#define	CONFIG_SYS_CSMR0		0x003f0021	/* 4MB, AA=0, WP=0, C/I=1, V=1  */
+#define	CONFIG_SYS_CS0_MASK		0x003f0021	/* 4MB, AA=0, WP=0, C/I=1, V=1  */
 
 /* CS1 - FPGA, address 0xe0000000 */
-#define	CONFIG_SYS_CSAR1		0xe000
-#define	CONFIG_SYS_CSCR1		0x0d80		/* WS=0011, AA=1, PS=10         */
-#define	CONFIG_SYS_CSMR1		0x00010001	/* 128kB, AA=0, WP=0, C/I=0, V=1*/
+#define	CONFIG_SYS_CS1_BASE		0xe0000000
+#define	CONFIG_SYS_CS1_CTRL		0x00000d80	/* WS=0011, AA=1, PS=10         */
+#define	CONFIG_SYS_CS1_MASK		0x00010001	/* 128kB, AA=0, WP=0, C/I=0, V=1*/
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h
index 3a5c12f..378e45a 100644
--- a/include/configs/M5253DEMO.h
+++ b/include/configs/M5253DEMO.h
@@ -90,7 +90,7 @@
 
 #define CONFIG_DRIVER_DM9000
 #ifdef CONFIG_DRIVER_DM9000
-#	define CONFIG_DM9000_BASE	((CONFIG_SYS_CSAR1 << 16) | 0x300)
+#	define CONFIG_DM9000_BASE	(CONFIG_SYS_CS1_BASE | 0x300)
 #	define DM9000_IO		CONFIG_DM9000_BASE
 #	define DM9000_DATA		(CONFIG_DM9000_BASE + 4)
 #	undef CONFIG_DM9000_DEBUG
@@ -202,7 +202,7 @@
 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CSAR0 << 16)
+#define CONFIG_SYS_FLASH_BASE		(CONFIG_SYS_CS0_BASE)
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	2048	/* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
@@ -233,21 +233,13 @@
 /* Port configuration */
 #define CONFIG_SYS_FECI2C		0xF0
 
-#define CONFIG_SYS_CSAR0		0xFF80
-#define CONFIG_SYS_CSMR0		0x007F0021
-#define CONFIG_SYS_CSCR0		0x1D80
+#define CONFIG_SYS_CS0_BASE		0xFF800000
+#define CONFIG_SYS_CS0_MASK		0x007F0021
+#define CONFIG_SYS_CS0_CTRL		0x00001D80
 
-#define CONFIG_SYS_CSAR1               0xE000
-#define CONFIG_SYS_CSMR1               0x00000001
-#define CONFIG_SYS_CSCR1               0x3DD8
-
-#define CONFIG_SYS_CSAR2		0
-#define CONFIG_SYS_CSMR2		0
-#define CONFIG_SYS_CSCR2		0
-
-#define CONFIG_SYS_CSAR3		0
-#define CONFIG_SYS_CSMR3		0
-#define CONFIG_SYS_CSCR3		0
+#define CONFIG_SYS_CS1_BASE		0xE0000000
+#define CONFIG_SYS_CS1_MASK		0x00000001
+#define CONFIG_SYS_CS1_CTRL		0x00003DD8
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/M5253EVBE.h b/include/configs/M5253EVBE.h
index c2cd62b..86de97d 100644
--- a/include/configs/M5253EVBE.h
+++ b/include/configs/M5253EVBE.h
@@ -166,7 +166,7 @@
 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
 /* FLASH organization */
-#define CONFIG_SYS_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 #define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
 #define CONFIG_SYS_MAX_FLASH_SECT	35	/* max number of sectors on one chip */
 #define CONFIG_SYS_FLASH_ERASE_TOUT	1000
@@ -182,21 +182,9 @@
 /* Port configuration */
 #define CONFIG_SYS_FECI2C		0xF0
 
-#define CONFIG_SYS_CSAR0		0xFFE0
-#define CONFIG_SYS_CSMR0		0x001F0021
-#define CONFIG_SYS_CSCR0		0x1D80
-
-#define CONFIG_SYS_CSAR1		0
-#define CONFIG_SYS_CSMR1		0
-#define CONFIG_SYS_CSCR1		0
-
-#define CONFIG_SYS_CSAR2		0
-#define CONFIG_SYS_CSMR2		0
-#define CONFIG_SYS_CSCR2		0
-
-#define CONFIG_SYS_CSAR3		0
-#define CONFIG_SYS_CSMR3		0
-#define CONFIG_SYS_CSCR3		0
+#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_MASK		0x001F0021
+#define CONFIG_SYS_CS0_CTRL		0x00001D80
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/M5272C3.h b/include/configs/M5272C3.h
index 779d373..fc73d64 100644
--- a/include/configs/M5272C3.h
+++ b/include/configs/M5272C3.h
@@ -194,12 +194,18 @@
  */
 #define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
 
-/*-----------------------------------------------------------------------
+/*
  * FLASH organization
  */
-#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks           */
-#define CONFIG_SYS_MAX_FLASH_SECT	11	/* max number of sectors on one chip    */
-#define CONFIG_SYS_FLASH_ERASE_TOUT	1000
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+#	define CONFIG_FLASH_CFI_DRIVER	1
+#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#endif
 
 /*-----------------------------------------------------------------------
  * Cache Configuration
diff --git a/include/configs/M5275EVB.h b/include/configs/M5275EVB.h
index 1f3539e..db48d76 100644
--- a/include/configs/M5275EVB.h
+++ b/include/configs/M5275EVB.h
@@ -173,7 +173,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
 #ifdef CONFIG_MONITOR_IS_IN_RAM
 #define CONFIG_SYS_MONITOR_BASE	0x20000
@@ -211,13 +211,13 @@
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
-#define CONFIG_SYS_AR0_PRELIM		(CONFIG_SYS_FLASH_BASE >> 16)
-#define CONFIG_SYS_CR0_PRELIM		0x1980
-#define CONFIG_SYS_MR0_PRELIM		0x001F0001
+#define CONFIG_SYS_CS0_BASE		0xffe00000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x001F0001
 
-#define CONFIG_SYS_AR1_PRELIM		0x3000
-#define CONFIG_SYS_CR1_PRELIM		0x1900
-#define CONFIG_SYS_MR1_PRELIM		0x00070001
+#define CONFIG_SYS_CS1_BASE		0x30000000
+#define CONFIG_SYS_CS1_CTRL		0x00001900
+#define CONFIG_SYS_CS1_MASK		0x00070001
 
 /*-----------------------------------------------------------------------
  * Port configuration
diff --git a/include/configs/M5282EVB.h b/include/configs/M5282EVB.h
index a8a2655..15590cf 100644
--- a/include/configs/M5282EVB.h
+++ b/include/configs/M5282EVB.h
@@ -165,7 +165,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define	CONFIG_SYS_SDRAM_SIZE		16	/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		0xffe00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 #define	CONFIG_SYS_INT_FLASH_BASE	0xf0000000
 #define CONFIG_SYS_INT_FLASH_ENABLE	0x21
 
@@ -212,18 +212,10 @@
 /*-----------------------------------------------------------------------
  * Memory bank definitions
  */
-#define CONFIG_SYS_CS0_BASE		CONFIG_SYS_FLASH_BASE
-#define CONFIG_SYS_CS0_SIZE		2*1024*1024
-#define CONFIG_SYS_CS0_WIDTH		16
-#define CONFIG_SYS_CS0_RO		0
-#define CONFIG_SYS_CS0_WS		6
-/*
-#define CONFIG_SYS_CS3_BASE		0xE0000000
-#define CONFIG_SYS_CS3_SIZE		1*1024*1024
-#define CONFIG_SYS_CS3_WIDTH		16
-#define CONFIG_SYS_CS3_RO		0
-#define CONFIG_SYS_CS3_WS		6
-*/
+#define CONFIG_SYS_CS0_BASE		0xFFE00000
+#define CONFIG_SYS_CS0_CTRL		0x00001980
+#define CONFIG_SYS_CS0_MASK		0x001F0001
+
 /*-----------------------------------------------------------------------
  * Port configuration
  */
diff --git a/include/configs/M53017EVB.h b/include/configs/M53017EVB.h
new file mode 100644
index 0000000..df54c60
--- /dev/null
+++ b/include/configs/M53017EVB.h
@@ -0,0 +1,247 @@
+/*
+ * Configuation settings for the Freescale MCF53017EVB.
+ *
+ * Copyright (C) 2004-2008 Freescale Semiconductor, Inc.
+ * TsiChung Liew (Tsi-Chung.Liew@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef _M53017EVB_H
+#define _M53017EVB_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+#define CONFIG_MCF5301x		/* define processor family */
+#define CONFIG_M53015		/* define processor type */
+
+#define CONFIG_MCFUART
+#define CONFIG_SYS_UART_PORT		(0)
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600 , 19200 , 38400 , 57600, 115200 }
+
+#undef CONFIG_WATCHDOG
+#define CONFIG_WATCHDOG_TIMEOUT		5000
+
+/* Command line configuration */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_FLASH
+#undef CONFIG_CMD_I2C
+#define CONFIG_CMD_MEMORY
+#define CONFIG_CMD_MISC
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+
+#define CONFIG_SYS_UNIFY_CACHE
+
+#define CONFIG_MCFFEC
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_NET_MULTI		1
+#	define CONFIG_MII		1
+#	define CONFIG_MII_INIT		1
+#	define CONFIG_SYS_DISCOVER_PHY
+#	define CONFIG_SYS_RX_ETH_BUFFER	8
+#	define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#	define CONFIG_HAS_ETH1
+
+#	define CONFIG_SYS_FEC0_PINMUX	0
+#	define CONFIG_SYS_FEC0_MIIBASE	CONFIG_SYS_FEC0_IOBASE
+#	define CONFIG_SYS_FEC1_PINMUX	0
+#	define CONFIG_SYS_FEC1_MIIBASE	CONFIG_SYS_FEC1_IOBASE
+#	define MCFFEC_TOUT_LOOP		50000
+/* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */
+#	ifndef CONFIG_SYS_DISCOVER_PHY
+#		define FECDUPLEX	FULL
+#		define FECSPEED		_100BASET
+#	else
+#		ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#			define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
+#		endif
+#	endif			/* CONFIG_SYS_DISCOVER_PHY */
+#endif
+
+#define CONFIG_MCFRTC
+#undef RTC_DEBUG
+#define CONFIG_SYS_RTC_CNT		(0x8000)
+#define CONFIG_SYS_RTC_SETUP		(RTC_OCEN_OSCBYP | RTC_OCEN_CLKEN)
+
+/* Timer */
+#define CONFIG_MCFTMR
+#undef CONFIG_MCFPIT
+
+/* I2C */
+#define CONFIG_FSL_I2C
+#define CONFIG_HARD_I2C			/* I2C with hw support */
+#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CONFIG_SYS_I2C_SPEED		80000
+#define CONFIG_SYS_I2C_SLAVE		0x7F
+#define CONFIG_SYS_I2C_OFFSET		0x58000
+#define CONFIG_SYS_IMMR			CONFIG_SYS_MBAR
+
+#define CONFIG_BOOTDELAY		1	/* autoboot after 5 seconds */
+#define CONFIG_UDP_CHECKSUM
+
+#ifdef CONFIG_MCFFEC
+#	define CONFIG_ETHADDR	00:e0:0c:bc:e5:60
+#	define CONFIG_ETH1ADDR	00:e0:0c:bc:e5:61
+#	define CONFIG_IPADDR	192.162.1.2
+#	define CONFIG_NETMASK	255.255.255.0
+#	define CONFIG_SERVERIP	192.162.1.1
+#	define CONFIG_GATEWAYIP	192.162.1.1
+#	define CONFIG_OVERWRITE_ETHADDR_ONCE
+#endif				/* FEC_ENET */
+
+#define CONFIG_HOSTNAME		M53017
+#define CONFIG_EXTRA_ENV_SETTINGS		\
+	"netdev=eth0\0"				\
+	"loadaddr=40010000\0"			\
+	"u-boot=u-boot.bin\0"			\
+	"load=tftp ${loadaddr) ${u-boot}\0"	\
+	"upd=run load; run prog\0"		\
+	"prog=prot off 0 3ffff;"		\
+	"era 0 3ffff;"				\
+	"cp.b ${loadaddr} 0 ${filesize};"	\
+	"save\0"				\
+	""
+
+#define CONFIG_PRAM		512	/* 512 KB */
+#define CONFIG_SYS_PROMPT	"-> "
+#define CONFIG_SYS_LONGHELP	/* undef to save memory */
+
+#ifdef CONFIG_CMD_KGDB
+#	define CONFIG_SYS_CBSIZE	1024	/* Console I/O Buffer Size */
+#else
+#	define CONFIG_SYS_CBSIZE	256	/* Console I/O Buffer Size */
+#endif
+
+#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS	16		/* max number of cmd args */
+#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Arg Buf Sz */
+#define CONFIG_SYS_LOAD_ADDR	0x40010000
+
+#define CONFIG_SYS_HZ		1000
+#define CONFIG_SYS_CLK		80000000
+#define CONFIG_SYS_CPU_CLK	CONFIG_SYS_CLK * 3
+
+#define CONFIG_SYS_MBAR		0xFC000000
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CONFIG_SYS_INIT_RAM_ADDR	0x80000000
+#define CONFIG_SYS_INIT_RAM_END		0x20000	/* End of used area in internal SRAM */
+#define CONFIG_SYS_INIT_RAM_CTRL	0x21
+#define CONFIG_SYS_GBL_DATA_SIZE	128	/* size in bytes reserved for initial data */
+#define CONFIG_SYS_GBL_DATA_OFFSET	((CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) - 0x10)
+#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET
+
+/*
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
+ */
+#define CONFIG_SYS_SDRAM_BASE		0x40000000
+#define CONFIG_SYS_SDRAM_SIZE		64	/* SDRAM size in MB */
+#define CONFIG_SYS_SDRAM_CFG1		0x43711630
+#define CONFIG_SYS_SDRAM_CFG2		0x56670000
+#define CONFIG_SYS_SDRAM_CTRL		0xE1002000
+#define CONFIG_SYS_SDRAM_EMOD		0x80010000
+#define CONFIG_SYS_SDRAM_MODE		0x00CD0000
+
+#define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE + 0x400
+#define CONFIG_SYS_MEMTEST_END		((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
+
+#define CONFIG_SYS_MONITOR_BASE		(CONFIG_SYS_FLASH_BASE + 0x400)
+#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for Monitor */
+
+#define CONFIG_SYS_BOOTPARAMS_LEN	64*1024
+#define CONFIG_SYS_MALLOC_LEN		(128 << 10)	/* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization ??
+ */
+#define CONFIG_SYS_BOOTMAPSZ		(CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20))
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CONFIG_SYS_FLASH_CFI
+#ifdef CONFIG_SYS_FLASH_CFI
+#	define CONFIG_FLASH_CFI_DRIVER		1
+#	define CONFIG_SYS_FLASH_SIZE		0x800000	/* Max size that the board might have */
+#	define CONFIG_SYS_FLASH_CFI_WIDTH	FLASH_CFI_16BIT
+#	define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks */
+#	define CONFIG_SYS_MAX_FLASH_SECT	137	/* max number of sectors on one chip */
+#	define CONFIG_SYS_FLASH_PROTECTION	/* "Real" (hardware) sectors protection */
+#endif
+
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
+
+/* Configuration for environment
+ * Environment is embedded in u-boot in the second sector of the flash
+ */
+#define CONFIG_ENV_OFFSET		0x8000
+#define CONFIG_ENV_SIZE			0x1000
+#define CONFIG_ENV_SECT_SIZE		0x8000
+#define CONFIG_ENV_IS_IN_FLASH		1
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_CACHELINE_SIZE	16
+
+/*-----------------------------------------------------------------------
+ * Chipselect bank definitions
+ */
+/*
+ * CS0 - NOR Flash
+ * CS1 - Ext SRAM
+ * CS2 - Available
+ * CS3 - Available
+ * CS4 - Available
+ * CS5 - Available
+ */
+#define CONFIG_SYS_CS0_BASE		0
+#define CONFIG_SYS_CS0_MASK		0x00FF0001
+#define CONFIG_SYS_CS0_CTRL		0x00001FA0
+
+#define CONFIG_SYS_CS1_BASE		0xC0000000
+#define CONFIG_SYS_CS1_MASK		0x00070001
+#define CONFIG_SYS_CS1_CTRL		0x00001FA0
+
+#endif				/* _M53017EVB_H */
diff --git a/include/configs/TASREG.h b/include/configs/TASREG.h
index 18ffbfd..25f3a26 100644
--- a/include/configs/TASREG.h
+++ b/include/configs/TASREG.h
@@ -206,7 +206,7 @@
  */
 #define CONFIG_SYS_SDRAM_BASE		0x00000000
 #define CONFIG_SYS_SDRAM_SIZE		16		/* SDRAM size in MB */
-#define CONFIG_SYS_FLASH_BASE		0xffc00000
+#define CONFIG_SYS_FLASH_BASE		CONFIG_SYS_CS0_BASE
 
 #if 0 /* test-only */
 #define CONFIG_PRAM             512 /* test-only for SDRAM problem!!!!!!!!!!!!!!!!!!!! */
@@ -257,15 +257,15 @@
  */
 
 /* CS0 - AMD Flash, address 0xffc00000 */
-#define	CONFIG_SYS_CSAR0               0xffc0
-#define	CONFIG_SYS_CSCR0               0x1980          /* WS=0110, AA=1, PS=10         */
+#define	CONFIG_SYS_CS0_BASE		0xffc00000
+#define	CONFIG_SYS_CS0_CTRL		0x00001980	/* WS=0110, AA=1, PS=10         */
 /** Note: There is a CSMR0/DRAM vector problem, need to disable C/I ***/
-#define	CONFIG_SYS_CSMR0               0x003f0021      /* 4MB, AA=0, WP=0, C/I=1, V=1  */
+#define	CONFIG_SYS_CS0_MASK		0x003f0021	/* 4MB, AA=0, WP=0, C/I=1, V=1  */
 
 /* CS1 - FPGA, address 0xe0000000 */
-#define	CONFIG_SYS_CSAR1               0xe000
-#define	CONFIG_SYS_CSCR1               0x0d80          /* WS=0011, AA=1, PS=10         */
-#define	CONFIG_SYS_CSMR1               0x00010001      /* 128kB, AA=0, WP=0, C/I=0, V=1*/
+#define	CONFIG_SYS_CS1_BASE		0xe0000000
+#define	CONFIG_SYS_CS1_CTRL		0x00000d80	/* WS=0011, AA=1, PS=10         */
+#define	CONFIG_SYS_CS1_MASK		0x00010001	/* 128kB, AA=0, WP=0, C/I=0, V=1*/
 
 /*-----------------------------------------------------------------------
  * Port configuration