net/memac_phy: reuse driver for little endian SoCs
The memac for PHY management on little endian SoCs is similar on big
endian SoCs, so we modify the driver by using I/O accessor function to
handle the endianness, so the driver can be reused on little endian
SoCs, we introduce CONFIG_SYS_MEMAC_LITTLE_ENDIAN for little endian
SoCs, if the CONFIG_SYS_MEMAC_LITTLE_ENDIAN is defined, the I/O access
is little endian, if not, the I/O access is big endian. Move fsl_memac.h
out of powerpc include.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: York Sun <yorksun@freescale.com>
diff --git a/arch/arm/include/asm/arch-fsl-lsch3/config.h b/arch/arm/include/asm/arch-fsl-lsch3/config.h
index 98db1ef..684c70f 100644
--- a/arch/arm/include/asm/arch-fsl-lsch3/config.h
+++ b/arch/arm/include/asm/arch-fsl-lsch3/config.h
@@ -109,6 +109,7 @@
/* IFC */
#define CONFIG_SYS_FSL_IFC_LE
+#define CONFIG_SYS_MEMAC_LITTLE_ENDIAN
/* PCIe */
#define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_IMMR + 0x2400000)
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 00a930c..150470c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -70,4 +70,5 @@
obj-$(CONFIG_ZYNQ_GEM) += zynq_gem.o
obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/
obj-$(CONFIG_FSL_MC_ENET) += ldpaa_eth/
+obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o
obj-$(CONFIG_VSC9953) += vsc9953.o
diff --git a/drivers/net/fm/eth.c b/drivers/net/fm/eth.c
index 55e76a7..d7a37f3 100644
--- a/drivers/net/fm/eth.c
+++ b/drivers/net/fm/eth.c
@@ -15,7 +15,7 @@
#include <phy.h>
#include <asm/fsl_dtsec.h>
#include <asm/fsl_tgec.h>
-#include <asm/fsl_memac.h>
+#include <fsl_memac.h>
#include "fm.h"
diff --git a/drivers/net/fm/memac.c b/drivers/net/fm/memac.c
index 60e898c..81a64bf 100644
--- a/drivers/net/fm/memac.c
+++ b/drivers/net/fm/memac.c
@@ -12,7 +12,7 @@
#include <phy.h>
#include <asm/types.h>
#include <asm/io.h>
-#include <asm/fsl_memac.h>
+#include <fsl_memac.h>
#include "fm.h"
diff --git a/drivers/net/fm/memac_phy.c b/drivers/net/fm/memac_phy.c
index a155d89..4ab78e6 100644
--- a/drivers/net/fm/memac_phy.c
+++ b/drivers/net/fm/memac_phy.c
@@ -10,9 +10,28 @@
#include <miiphy.h>
#include <phy.h>
#include <asm/io.h>
-#include <asm/fsl_memac.h>
+#include <fsl_memac.h>
#include <fm_eth.h>
+#ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+#define memac_out_32(a, v) out_le32(a, v)
+#define memac_clrbits_32(a, v) clrbits_le32(a, v)
+#define memac_setbits_32(a, v) setbits_le32(a, v)
+#else
+#define memac_out_32(a, v) out_be32(a, v)
+#define memac_clrbits_32(a, v) clrbits_be32(a, v)
+#define memac_setbits_32(a, v) setbits_be32(a, v)
+#endif
+
+static u32 memac_in_32(u32 *reg)
+{
+#ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN
+ return in_le32(reg);
+#else
+ return in_be32(reg);
+#endif
+}
+
/*
* Write value to the PHY for this device to the register at regnum, waiting
* until the write is done before it returns. All PHY configuration has to be
@@ -28,31 +47,31 @@
if (dev_addr == MDIO_DEVAD_NONE) {
c45 = 0; /* clause 22 */
dev_addr = regnum & 0x1f;
- clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ memac_clrbits_32(®s->mdio_stat, MDIO_STAT_ENC);
} else
- setbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ memac_setbits_32(®s->mdio_stat, MDIO_STAT_ENC);
/* Wait till the bus is free */
- while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY)
;
/* Set the port and dev addr */
mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
- out_be32(®s->mdio_ctl, mdio_ctl);
+ memac_out_32(®s->mdio_ctl, mdio_ctl);
/* Set the register address */
if (c45)
- out_be32(®s->mdio_addr, regnum & 0xffff);
+ memac_out_32(®s->mdio_addr, regnum & 0xffff);
/* Wait till the bus is free */
- while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY)
;
/* Write the value to the register */
- out_be32(®s->mdio_data, MDIO_DATA(value));
+ memac_out_32(®s->mdio_data, MDIO_DATA(value));
/* Wait till the MDIO write is complete */
- while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY)
+ while ((memac_in_32(®s->mdio_data)) & MDIO_DATA_BSY)
;
return 0;
@@ -75,39 +94,39 @@
return 0xffff;
c45 = 0; /* clause 22 */
dev_addr = regnum & 0x1f;
- clrbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ memac_clrbits_32(®s->mdio_stat, MDIO_STAT_ENC);
} else
- setbits_be32(®s->mdio_stat, MDIO_STAT_ENC);
+ memac_setbits_32(®s->mdio_stat, MDIO_STAT_ENC);
/* Wait till the bus is free */
- while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY)
;
/* Set the Port and Device Addrs */
mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
- out_be32(®s->mdio_ctl, mdio_ctl);
+ memac_out_32(®s->mdio_ctl, mdio_ctl);
/* Set the register address */
if (c45)
- out_be32(®s->mdio_addr, regnum & 0xffff);
+ memac_out_32(®s->mdio_addr, regnum & 0xffff);
/* Wait till the bus is free */
- while ((in_be32(®s->mdio_stat)) & MDIO_STAT_BSY)
+ while ((memac_in_32(®s->mdio_stat)) & MDIO_STAT_BSY)
;
/* Initiate the read */
mdio_ctl |= MDIO_CTL_READ;
- out_be32(®s->mdio_ctl, mdio_ctl);
+ memac_out_32(®s->mdio_ctl, mdio_ctl);
/* Wait till the MDIO write is complete */
- while ((in_be32(®s->mdio_data)) & MDIO_DATA_BSY)
+ while ((memac_in_32(®s->mdio_data)) & MDIO_DATA_BSY)
;
/* Return all Fs if nothing was there */
- if (in_be32(®s->mdio_stat) & MDIO_STAT_RD_ER)
+ if (memac_in_32(®s->mdio_stat) & MDIO_STAT_RD_ER)
return 0xffff;
- return in_be32(®s->mdio_data) & 0xffff;
+ return memac_in_32(®s->mdio_data) & 0xffff;
}
int memac_mdio_reset(struct mii_dev *bus)
@@ -143,8 +162,9 @@
* like T2080QDS, this bit default is '0', which leads to MDIO failure
* on XAUI PHY, so set this bit definitely.
*/
- setbits_be32(&((struct memac_mdio_controller *)info->regs)->mdio_stat,
- MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG);
+ memac_setbits_32(
+ &((struct memac_mdio_controller *)info->regs)->mdio_stat,
+ MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG);
return mdio_register(bus);
}
diff --git a/drivers/net/vsc9953.c b/drivers/net/vsc9953.c
index 9fc3c18..fed7358 100644
--- a/drivers/net/vsc9953.c
+++ b/drivers/net/vsc9953.c
@@ -9,7 +9,7 @@
#include <asm/io.h>
#include <asm/fsl_serdes.h>
#include <fm_eth.h>
-#include <asm/fsl_memac.h>
+#include <fsl_memac.h>
#include <vsc9953.h>
static struct vsc9953_info vsc9953_l2sw = {
diff --git a/arch/powerpc/include/asm/fsl_memac.h b/include/fsl_memac.h
similarity index 100%
rename from arch/powerpc/include/asm/fsl_memac.h
rename to include/fsl_memac.h