Merge with /home/wd/git/u-boot/master
diff --git a/CHANGELOG b/CHANGELOG
index 441fe16..0f67829 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -170,9 +170,27 @@
Enable commandline editing and hush shell on all TQM boards.
+<<<<<<< master
+* Code cleanup
+
+* Various USB related patches
+ - Add support for mpc8xx USB device.
+ - Add support for Common Device Class - Abstract Control Model USB console.
+ - Add support for flow control in USB slave devices.
+ - Add support for switching between gserial and cdc_acm using environment.
+ - Minor changes to usbdcore_omap1510.c usbdcore_omap1510.h
+ - Update usbcore slightly to ease host enumeration.
+ - Fix non-portable endian problems in usbdcore and usbdcore_ep0.
+ - Add AdderUSB_config as a defconfig to enable usage of the USB console
+ by default with the Adder87x U-Boot port.
+ Patch by Bryan O'Donoghue <bodonoghue@codehermit.ie>, 29 May 2006
+
+* Cleanup trab board for GCC-4.x
+=======
commit 8078f1a5f63a739b8533478f6c2b62fb1e2f79d7
Author: Wolfgang Denk <wd@pollux.denx.de>
Date: Sat Oct 28 02:28:02 2006 +0200
+>>>>>>> trunk
README says CFG_AUTO_COMPLETE, but ocde uses CONFIG_AUTO_COMPLETE
diff --git a/Makefile b/Makefile
index 5316504..98f29c9 100644
--- a/Makefile
+++ b/Makefile
@@ -122,7 +122,7 @@
CROSS_COMPILE =
else
ifeq ($(ARCH),ppc)
-CROSS_COMPILE = powerpc-linux-
+CROSS_COMPILE = ppc_8xx-
endif
ifeq ($(ARCH),arm)
CROSS_COMPILE = arm-linux-
@@ -611,6 +611,9 @@
@echo "#define CONFIG_MPC852T" > $(obj)include/config.h)
@$(MKCONFIG) -a Adder ppc mpc8xx adder
+AdderUSB_config: unconfig
+ @./mkconfig -a AdderUSB ppc mpc8xx adder
+
ADS860_config \
FADS823_config \
FADS850SAR_config \
diff --git a/README b/README
index f78bf50..c04cbad 100644
--- a/README
+++ b/README
@@ -883,6 +883,68 @@
for differential drivers: 0x00001000
for single ended drivers: 0x00005000
+- USB Device:
+ Define the below if you wish to use the USB console.
+ Once firmware is rebuilt from a serial console issue the
+ command "setenv stdin usbtty; setenv stdout usbtty" and
+ attach your usb cable. The Unix command "dmesg" should print
+ it has found a new device. The environment variable usbtty
+ can be set to gserial or cdc_acm to enable your device to
+ appear to a USB host as a Linux gserial device or a
+ Common Device Class Abstract Control Model serial device.
+ If you select usbtty = gserial you should be able to enumerate
+ a Linux host by
+ # modprobe usbserial vendor=0xVendorID product=0xProductID
+ else if using cdc_acm, simply setting the environment
+ variable usbtty to be cdc_acm should suffice. The following
+ might be defined in YourBoardName.h
+
+ CONFIG_USB_DEVICE
+ Define this to build a UDC device
+
+ CONFIG_USB_TTY
+ Define this to have a tty type of device available to
+ talk to the UDC device
+
+ CFG_CONSOLE_IS_IN_ENV
+ Define this if you want stdin, stdout &/or stderr to
+ be set to usbtty.
+
+ mpc8xx:
+ CFG_USB_EXTC_CLK 0xBLAH
+ Derive USB clock from external clock "blah"
+ - CFG_USB_EXTC_CLK 0x02
+
+ CFG_USB_BRG_CLK 0xBLAH
+ Derive USB clock from brgclk
+ - CFG_USB_BRG_CLK 0x04
+
+ If you have a USB-IF assigned VendorID then you may wish to
+ define your own vendor specific values either in BoardName.h
+ or directly in usbd_vendor_info.h. If you don't define
+ CONFIG_USBD_MANUFACTURER, CONFIG_USBD_PRODUCT_NAME,
+ CONFIG_USBD_VENDORID and CONFIG_USBD_PRODUCTID, then U-Boot
+ should pretend to be a Linux device to it's target host.
+
+ CONFIG_USBD_MANUFACTURER
+ Define this string as the name of your company for
+ - CONFIG_USBD_MANUFACTURER "my company"
+
+ CONFIG_USBD_PRODUCT_NAME
+ Define this string as the name of your product
+ - CONFIG_USBD_PRODUCT_NAME "acme usb device"
+
+ CONFIG_USBD_VENDORID
+ Define this as your assigned Vendor ID from the USB
+ Implementors Forum. This *must* be a genuine Vendor ID
+ to avoid polluting the USB namespace.
+ - CONFIG_USBD_VENDORID 0xFFFF
+
+ CONFIG_USBD_PRODUCTID
+ Define this as the unique Product ID
+ for your device
+ - CONFIG_USBD_PRODUCTID 0xFFFF
+
- MMC Support:
The MMC controller on the Intel PXA is supported. To
diff --git a/board/delta/delta.c b/board/delta/delta.c
index b127ac8..6e22774 100644
--- a/board/delta/delta.c
+++ b/board/delta/delta.c
@@ -1,10 +1,6 @@
/*
- * (C) Copyright 2002
- * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
- *
- * (C) Copyright 2002
- * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
- * Marius Groeger <mgroeger@sysgo.de>
+ * (C) Copyright 2006
+ * DENX Software Engineering
*
* See file CREDITS for list of people who contributed to this
* project.
@@ -98,7 +94,6 @@
return 0;
}
-
/*
* Magic Key Handling, mainly copied from board/lwmon/lwmon.c
*/
@@ -324,6 +319,12 @@
return;
}
+ val = 0x80;
+ if(i2c_write(addr, IRQ_MASK_B, 1, &val, 1)) {
+ printf("Error accessing DA9030 via i2c.\n");
+ return;
+ }
+
i2c_reg_write(addr, REG_CONTROL_1_97, 0xfd); /* disable LDO1, enable LDO6 */
i2c_reg_write(addr, LDO2_3, 0xd1); /* LDO2 =1,9V, LDO3=3,1V */
i2c_reg_write(addr, LDO4_5, 0xcc); /* LDO2 =1,9V, LDO3=3,1V */
diff --git a/cpu/arm920t/at91rm9200/Makefile b/cpu/arm920t/at91rm9200/Makefile
index 8d4e478..eaabad2 100644
--- a/cpu/arm920t/at91rm9200/Makefile
+++ b/cpu/arm920t/at91rm9200/Makefile
@@ -26,7 +26,7 @@
LIB = $(obj)lib$(SOC).a
COBJS = bcm5221.o dm9161.o ether.o i2c.o interrupts.o \
- lxt972.o serial.o usb_ohci.o
+ lxt972.o serial.o usb.o
SOBJS = lowlevel_init.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
diff --git a/cpu/arm920t/at91rm9200/usb.c b/cpu/arm920t/at91rm9200/usb.c
new file mode 100644
index 0000000..98e3cdd
--- /dev/null
+++ b/cpu/arm920t/at91rm9200/usb.c
@@ -0,0 +1,53 @@
+/*
+ * (C) Copyright 2006
+ * DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT)
+# ifdef CONFIG_AT91RM9200
+
+#include <asm/arch/hardware.h>
+
+int usb_cpu_init()
+{
+ /* Enable USB host clock. */
+ *AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */
+ *AT91C_PMC_PCER = 1 << AT91C_ID_UHP; /* Peripheral Clock Enable Register */
+ return 0;
+}
+
+int usb_cpu_stop()
+{
+ /* Initialization failed */
+ *AT91C_PMC_PCDR = 1 << AT91C_ID_UHP; /* Peripheral Clock Disable Register */
+ *AT91C_PMC_SCDR = AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */
+ return 0;
+}
+
+int usb_cpu_init_fail()
+{
+ usb_cpu_stop();
+}
+
+# endif /* CONFIG_AT91RM9200 */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/arm920t/s3c24x0/Makefile b/cpu/arm920t/s3c24x0/Makefile
index 3a7c4b3..0ff36c5 100644
--- a/cpu/arm920t/s3c24x0/Makefile
+++ b/cpu/arm920t/s3c24x0/Makefile
@@ -26,7 +26,7 @@
LIB = $(obj)lib$(SOC).a
COBJS = i2c.o interrupts.o serial.o speed.o \
- usb_ohci.o
+ usb.o
SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/arm920t/s3c24x0/usb.c b/cpu/arm920t/s3c24x0/usb.c
new file mode 100644
index 0000000..4bc7961
--- /dev/null
+++ b/cpu/arm920t/s3c24x0/usb.c
@@ -0,0 +1,72 @@
+/*
+ * (C) Copyright 2006
+ * DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT)
+# if defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410)
+
+#if defined(CONFIG_S3C2400)
+# include <s3c2400.h>
+#elif defined(CONFIG_S3C2410)
+# include <s3c2410.h>
+#endif
+
+int usb_cpu_init (void)
+{
+
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ S3C24X0_GPIO * const gpio = S3C24X0_GetBase_GPIO();
+
+ /*
+ * Set the 48 MHz UPLL clocking. Values are taken from
+ * "PLL value selection guide", 6-23, s3c2400_UM.pdf.
+ */
+ clk_power->UPLLCON = ((40 << 12) + (1 << 4) + 2);
+ gpio->MISCCR |= 0x8; /* 1 = use pads related USB for USB host */
+
+ /*
+ * Enable USB host clock.
+ */
+ clk_power->CLKCON |= (1 << 4);
+
+ return 0;
+}
+
+int usb_cpu_stop (void)
+{
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ /* may not want to do this */
+ clk_power->CLKCON &= ~(1 << 4);
+ return 0;
+}
+
+int usb_cpu_init_fail (void)
+{
+ S3C24X0_CLOCK_POWER * const clk_power = S3C24X0_GetBase_CLOCK_POWER();
+ clk_power->CLKCON &= ~(1 << 4);
+ return 0;
+}
+
+# endif /* defined(CONFIG_S3C2400) || defined(CONFIG_S3C2410) */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/cpu/pxa/Makefile b/cpu/pxa/Makefile
index cded7ff..8b4367e 100644
--- a/cpu/pxa/Makefile
+++ b/cpu/pxa/Makefile
@@ -26,7 +26,7 @@
LIB = $(obj)lib$(CPU).a
START = start.o
-COBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o
+COBJS = serial.o interrupts.o cpu.o i2c.o pxafb.o mmc.o usb.o
SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS:.o=.c)
OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
diff --git a/cpu/pxa/usb.c b/cpu/pxa/usb.c
new file mode 100644
index 0000000..bff5bfb
--- /dev/null
+++ b/cpu/pxa/usb.c
@@ -0,0 +1,78 @@
+/*
+ * (C) Copyright 2006
+ * Markus Klotzbuecher, DENX Software Engineering <mk@denx.de>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+#if defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT)
+# ifdef CONFIG_CPU_MONAHANS
+
+#include <asm/arch/pxa-regs.h>
+
+int usb_cpu_init()
+{
+ /* Enable USB host clock. */
+ CKENA |= (CKENA_2_USBHOST | CKENA_20_UDC);
+ udelay(100);
+
+ /* Configure Port 2 for Host (USB Client Registers) */
+ UP2OCR = 0x3000c;
+
+#if 0
+ GPIO2_2 = 0x801; /* USBHPEN - Alt. Fkt. 1 */
+ GPIO3_2 = 0x801; /* USBHPWR - Alt. Fkt. 1 */
+#endif
+
+ UHCHR |= UHCHR_FHR;
+ wait_ms(11);
+ UHCHR &= ~UHCHR_FHR;
+
+ UHCHR |= UHCHR_FSBIR;
+ while (UHCHR & UHCHR_FSBIR)
+ udelay(1);
+
+#if 0
+ UHCHR |= UHCHR_PCPL; /* USBHPEN is active low */
+ UHCHR |= UHCHR_PSPL; /* USBHPWR is active low */
+#endif
+
+ UHCHR &= ~UHCHR_SSEP0;
+ UHCHR &= ~UHCHR_SSEP1;
+ UHCHR &= ~UHCHR_SSE;
+
+ return 0;
+}
+
+int usb_cpu_stop()
+{
+ /* may not want to do this */
+ /* CKENA &= ~(CKENA_2_USBHOST | CKENA_20_UDC); */
+ return 0;
+}
+
+int usb_cpu_init_fail()
+{
+ return 0;
+}
+
+# endif /* CONFIG_CPU_MONAHANS */
+#endif /* defined(CONFIG_USB_OHCI) && defined(CFG_USB_OHCI_CPU_INIT) */
diff --git a/drivers/Makefile b/drivers/Makefile
index 5a369df..b89b06f 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -46,7 +46,9 @@
sl811_usb.o sm501.o smc91111.o smiLynxEM.o \
status_led.o sym53c8xx.o ahci.o \
ti_pci1410a.o tigon3.o tsec.o \
- usbdcore.o usbdcore_ep0.o usbdcore_omap1510.o usbtty.o \
+ usb_ohci.o \
+ usbdcore.o usbdcore_ep0.o usbdcore_mpc8xx.o usbdcore_omap1510.o \
+ usbtty.o \
videomodes.o w83c553f.o \
ks8695eth.o \
pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
diff --git a/cpu/arm920t/at91rm9200/usb_ohci.c b/drivers/usb_ohci.c
similarity index 90%
rename from cpu/arm920t/at91rm9200/usb_ohci.c
rename to drivers/usb_ohci.c
index 5b2c56c..9b3ca12 100644
--- a/cpu/arm920t/at91rm9200/usb_ohci.c
+++ b/drivers/usb_ohci.c
@@ -21,7 +21,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -45,13 +45,28 @@
#ifdef CONFIG_USB_OHCI
-#include <asm/arch/hardware.h>
+#if defined(CONFIG_S3C2400)
+# include <s3c2400.h>
+#elif defined(CONFIG_S3C2410)
+# include <s3c2410.h>
+#elif defined(CONFIG_ARM920T)
+# include <asm/arch/hardware.h>
+#elif defined(CONFIG_CPU_MONAHANS)
+# include <asm/arch/pxa-regs.h>
+#endif
#include <malloc.h>
#include <usb.h>
#include "usb_ohci.h"
-#define OHCI_USE_NPS /* force NoPowerSwitching mode */
+#undef S3C24X0_merge
+
+#if defined(CONFIG_ARM920T) || \
+ defined(CONFIG_S3C2400) || \
+ defined(CONFIG_S3C2410)
+# define OHCI_USE_NPS /* force NoPowerSwitching mode */
+#endif
+
#undef OHCI_VERBOSE_DEBUG /* not always helpful */
/* For initializing controller (mask in an HCFS mode too) */
@@ -95,6 +110,12 @@
/* device which was disconnected */
struct usb_device *devgone;
+#ifdef S3C24X0_merge
+/* flag guarding URB transation */
+int urb_finished = 0;
+#endif
+
+
/*-------------------------------------------------------------------------*/
/* AMD-756 (D2 rev) reports corrupt register contents in some cases.
@@ -399,6 +420,17 @@
err("sohci_submit_job: EPIPE");
return -1;
}
+#ifdef S3C24X0_merge
+ /* if we have an unfinished URB from previous transaction let's
+ * fail and scream as quickly as possible so as not to corrupt
+ * further communication */
+ if (!urb_finished) {
+ err("sohci_submit_job: URB NOT FINISHED");
+ return -1;
+ }
+ /* we're about to begin a new transaction here so mark the URB unfinished */
+ urb_finished = 0;
+#endif
/* every endpoint has a ed, locate and fill it */
if (!(ed = ep_add_ed (dev, pipe))) {
@@ -571,12 +603,14 @@
/*-------------------------------------------------------------------------*/
-/* add/reinit an endpoint; this should be done once at the usb_set_configuration command,
- * but the USB stack is a little bit stateless so we do it at every transaction
- * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK
- * in all other cases the state is left unchanged
- * the ed info fields are setted anyway even though most of them should not change */
-
+/* add/reinit an endpoint; this should be done once at the
+ * usb_set_configuration command, but the USB stack is a little bit
+ * stateless so we do it at every transaction if the state of the ed
+ * is ED_NEW then a dummy td is added and the state is changed to
+ * ED_UNLINK in all other cases the state is left unchanged the ed
+ * info fields are setted anyway even though most of them should not
+ * change
+ */
static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe)
{
td_t *td;
@@ -660,7 +694,9 @@
else
td->hwBE = 0;
td->hwNextTD = m32_swap (td_pt);
+#ifndef S3C24X0_merge
td->hwPSW [0] = m16_swap (((__u32)data & 0x0FFF) | 0xE000);
+#endif
/* append to queue */
td->ed->hwTailP = td->hwNextTD;
@@ -827,7 +863,18 @@
dbg("ConditionCode %#x", cc);
stat = cc_to_error[cc];
}
-
+#ifdef S3C24X0_merge
+ /* see if this done list makes for all TD's of current URB,
+ * and mark the URB finished if so */
+ if (++(lurb_priv->td_cnt) == lurb_priv->length) {
+ if ((ed->state & (ED_OPER | ED_UNLINK)))
+ urb_finished = 1;
+ else
+ dbg("dl_done_list: strange.., ED state %x, ed->state\n");
+ } else
+ dbg("dl_done_list: processing TD %x, len %x\n", lurb_priv->td_cnt,
+ lurb_priv->length);
+#endif
if (ed->state != ED_NEW) {
edHeadP = m32_swap (ed->hwHeadP) & 0xfffffff0;
edTailP = m32_swap (ed->hwTailP);
@@ -974,7 +1021,6 @@
#ifdef CONFIG_AT91C_PQFP_UHPBUG
ndp = (ndp == 2) ? 1:0;
#endif
-
for (i = 0; i < ndp; i++) {
temp = roothub_portstatus (controller, i);
/* check for a device disconnect */
@@ -1170,7 +1216,7 @@
}
len = min_t(unsigned int, leni,
- min_t(unsigned int, data_buf [0], wLength));
+ min_t(unsigned int, data_buf [0], wLength));
OK (len);
}
@@ -1258,18 +1304,38 @@
stat = USB_ST_CRC_ERR;
break;
}
+
+#ifdef S3C24X0_merge
+ /* NOTE: since we are not interrupt driven in U-Boot and always
+ * handle only one URB at a time, we cannot assume the
+ * transaction finished on the first successful return from
+ * hc_interrupt().. unless the flag for current URB is set,
+ * meaning that all TD's to/from device got actually
+ * transferred and processed. If the current URB is not
+ * finished we need to re-iterate this loop so as
+ * hc_interrupt() gets called again as there needs to be some
+ * more TD's to process still */
+ if ((stat >= 0) && (stat != 0xff) && (urb_finished)) {
+#else
if (stat >= 0 && stat != 0xff) {
+#endif
/* 0xff is returned for an SF-interrupt */
break;
}
+
if (--timeout) {
wait_ms(1);
} else {
err("CTL:TIMEOUT ");
+#ifdef S3C24X0_merge
+ dbg("submit_common_msg: TO status %x\n", stat);
+ urb_finished = 1;
+#endif
stat = USB_ST_CRC_ERR;
break;
}
}
+#ifndef S3C24X0_merge
/* we got an Root Hub Status Change interrupt */
if (got_rhsc) {
#ifdef DEBUG
@@ -1291,6 +1357,7 @@
devgone = dev;
}
}
+#endif /* S3C24X0_merge */
dev->status = stat;
dev->act_len = transfer_len;
@@ -1460,24 +1527,40 @@
/* an interrupt happens */
-static int
-hc_interrupt (void)
+static int hc_interrupt (void)
{
ohci_t *ohci = &gohci;
struct ohci_regs *regs = ohci->regs;
int ints;
int stat = -1;
+#ifdef S3C24X0_merge
+
+ if ((ohci->hcca->done_head != 0) &&
+ !(m32_swap (ohci->hcca->done_head) & 0x01)) {
+ ints = OHCI_INTR_WDH;
+ } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) {
+ ohci->disabled++;
+ err ("%s device removed!", ohci->slot_name);
+ return -1;
+ } else if ((ints &= readl (®s->intrenable)) == 0) {
+ dbg("hc_interrupt: returning..\n");
+ return 0xff;
+ }
+#else
if ((ohci->hcca->done_head != 0) && !(m32_swap (ohci->hcca->done_head) & 0x01)) {
ints = OHCI_INTR_WDH;
} else {
ints = readl (®s->intrstatus);
}
-
+#endif
/* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */
if (ints & OHCI_INTR_RHSC) {
got_rhsc = 1;
+#ifdef S3C24X0_merge
+ stat = 0xff;
+#endif
}
if (ints & OHCI_INTR_UE) {
@@ -1549,12 +1632,18 @@
int usb_lowlevel_init(void)
{
- /*
- * Enable USB host clock.
- */
- *AT91C_PMC_SCER = AT91C_PMC_UHP; /* 48MHz clock enabled for UHP */
- *AT91C_PMC_PCER = 1 << AT91C_ID_UHP; /* Peripheral Clock Enable Register */
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant init */
+ if(usb_cpu_init())
+ return -1;
+#endif
+
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant init */
+ if(usb_board_init())
+ return -1;
+#endif
memset (&gohci, 0, sizeof (ohci_t));
memset (&urb_priv, 0, sizeof (urb_priv_t));
@@ -1582,29 +1671,42 @@
gohci.disabled = 1;
gohci.sleeping = 0;
gohci.irq = -1;
- gohci.regs = (struct ohci_regs *)AT91_USB_HOST_BASE;
+ gohci.regs = (struct ohci_regs *)CFG_USB_OHCI_REGS_BASE;
gohci.flags = 0;
- gohci.slot_name = "at91rm9200";
+ gohci.slot_name = CFG_USB_OHCI_SLOT_NAME;
if (hc_reset (&gohci) < 0) {
hc_release_ohci (&gohci);
- /* Initialization failed */
- *AT91C_PMC_PCER = AT91C_ID_UHP;
- *AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */
+ err ("can't reset usb-%s", gohci.slot_name);
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant cleanup */
+ usb_board_init_fail();
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant cleanup */
+ usb_cpu_init_fail();
+#endif
return -1;
}
/* FIXME this is a second HC reset; why?? */
-/* writel (gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
- wait_ms (10);*/
-
+ /* writel(gohci.hc_control = OHCI_USB_RESET, &gohci.regs->control);
+ wait_ms(10); */
if (hc_start (&gohci) < 0) {
err ("can't start usb-%s", gohci.slot_name);
hc_release_ohci (&gohci);
/* Initialization failed */
- *AT91C_PMC_PCER = AT91C_ID_UHP;
- *AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant cleanup */
+ usb_board_stop();
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant cleanup */
+ usb_cpu_stop();
+#endif
return -1;
}
@@ -1612,6 +1714,9 @@
ohci_dump (&gohci, 1);
#else
wait_ms(1);
+# ifdef S3C24X0_merge
+ urb_finished = 1;
+# endif
#endif
ohci_inited = 1;
return 0;
@@ -1626,9 +1731,19 @@
/* TODO release any interrupts, etc. */
/* call hc_release_ohci() here ? */
hc_reset (&gohci);
- /* may not want to do this */
- *AT91C_PMC_PCER = 1 << AT91C_ID_UHP;
- *AT91C_PMC_SCDR = 1 << AT91C_PMC_UHP; /* 48MHz clock disabled for UHP */
+
+#ifdef CFG_USB_OHCI_BOARD_INIT
+ /* board dependant cleanup */
+ if(usb_board_stop())
+ return -1;
+#endif
+
+#ifdef CFG_USB_OHCI_CPU_INIT
+ /* cpu dependant cleanup */
+ if(usb_cpu_stop())
+ return -1;
+#endif
+
return 0;
}
diff --git a/cpu/arm920t/at91rm9200/usb_ohci.h b/drivers/usb_ohci.h
similarity index 96%
rename from cpu/arm920t/at91rm9200/usb_ohci.h
rename to drivers/usb_ohci.h
index ecb4e93..68dd4ec 100644
--- a/cpu/arm920t/at91rm9200/usb_ohci.h
+++ b/drivers/usb_ohci.h
@@ -7,6 +7,15 @@
* usb-ohci.h
*/
+/* functions for doing board or CPU specific setup/cleanup */
+extern int usb_board_init(void);
+extern int usb_board_stop(void);
+extern int usb_cpu_init_fail(void);
+
+extern int usb_cpu_init(void);
+extern int usb_cpu_stop(void);
+extern int usb_cpu_init_fail(void);
+
static int cc_to_error[16] = {
@@ -138,7 +147,7 @@
/*
* Maximum number of root hub ports.
*/
-#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */
+#define MAX_ROOT_PORTS 3 /* maximum OHCI root hub ports */
/*
* This is the structure of the OHCI controller's memory mapped I/O
diff --git a/drivers/usbdcore_ep0.c b/drivers/usbdcore_ep0.c
index 260befe..1e44f32 100644
--- a/drivers/usbdcore_ep0.c
+++ b/drivers/usbdcore_ep0.c
@@ -2,6 +2,9 @@
* (C) Copyright 2003
* Gerry Hamel, geh@ti.com, Texas Instruments
*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@CodeHermit.ie
+ *
* Based on
* linux/drivers/usbd/ep0.c
*
@@ -39,11 +42,17 @@
* function driver. This may need to change.
*
* XXX
+ *
+ * As alluded to above, a simple callback cdc_recv_setup has been implemented
+ * in the usb_device data structure to facilicate passing
+ * Common Device Class packets to a function driver.
+ *
+ * XXX
*/
#include <common.h>
-#if defined(CONFIG_OMAP1510) && defined(CONFIG_USB_DEVICE)
+#if defined(CONFIG_USB_DEVICE)
#include "usbdcore.h"
#if 0
@@ -69,7 +78,7 @@
char *cp;
urb->actual_length = 2;
- cp = urb->buffer;
+ cp = (char*)urb->buffer;
cp[0] = cp[1] = 0;
switch (requesttype) {
@@ -115,7 +124,7 @@
*
* Copy configuration data to urb transfer buffer if there is room for it.
*/
-static void copy_config (struct urb *urb, void *data, int max_length,
+void copy_config (struct urb *urb, void *data, int max_length,
int max_buf)
{
int available;
@@ -128,10 +137,7 @@
dbg_ep0 (1, "data is NULL");
return;
}
- if (!(length = *(unsigned char *) data)) {
- dbg_ep0 (1, "length is zero");
- return;
- }
+ length = max_length;
if (length > max_length) {
dbg_ep0 (1, "length: %d >= max_length: %d", length,
@@ -192,7 +198,7 @@
/* setup tx urb */
urb->actual_length = 0;
- cp = urb->buffer;
+ cp = (char*)urb->buffer;
dbg_ep0 (2, "%s", USBD_DEVICE_DESCRIPTORS (descriptor_type));
@@ -200,7 +206,6 @@
case USB_DESCRIPTOR_TYPE_DEVICE:
{
struct usb_device_descriptor *device_descriptor;
-
if (!
(device_descriptor =
usbd_device_device_descriptor (device, port))) {
@@ -214,20 +219,16 @@
/* correct the correct control endpoint 0 max packet size into the descriptor */
device_descriptor =
(struct usb_device_descriptor *) urb->buffer;
- device_descriptor->bMaxPacketSize0 =
- urb->device->bus->maxpacketsize;
}
- /*dbg_ep0(3, "copied device configuration, actual_length: %x", urb->actual_length); */
+ dbg_ep0(3, "copied device configuration, actual_length: 0x%x", urb->actual_length);
break;
case USB_DESCRIPTOR_TYPE_CONFIGURATION:
{
- int bNumInterface;
struct usb_configuration_descriptor
*configuration_descriptor;
struct usb_device_descriptor *device_descriptor;
-
if (!
(device_descriptor =
usbd_device_device_descriptor (device, port))) {
@@ -251,130 +252,35 @@
index);
return -1;
}
+ dbg_ep0(0, "attempt to copy %d bytes to urb\n",cpu_to_le16(configuration_descriptor->wTotalLength));
copy_config (urb, configuration_descriptor,
- sizeof (struct
- usb_configuration_descriptor),
+
+ cpu_to_le16(configuration_descriptor->wTotalLength),
max);
-
-
- /* iterate across interfaces for specified configuration */
- dbg_ep0 (0, "bNumInterfaces: %d",
- configuration_descriptor->bNumInterfaces);
- for (bNumInterface = 0;
- bNumInterface <
- configuration_descriptor->bNumInterfaces;
- bNumInterface++) {
-
- int bAlternateSetting;
- struct usb_interface_instance
- *interface_instance;
-
- dbg_ep0 (3, "[%d] bNumInterfaces: %d",
- bNumInterface,
- configuration_descriptor->bNumInterfaces);
-
- if (! (interface_instance = usbd_device_interface_instance (device,
- port, index, bNumInterface)))
- {
- dbg_ep0 (3, "[%d] interface_instance NULL",
- bNumInterface);
- return -1;
- }
- /* iterate across interface alternates */
- for (bAlternateSetting = 0;
- bAlternateSetting < interface_instance->alternates;
- bAlternateSetting++) {
- /*int class; */
- int bNumEndpoint;
- struct usb_interface_descriptor *interface_descriptor;
-
- struct usb_alternate_instance *alternate_instance;
-
- dbg_ep0 (3, "[%d:%d] alternates: %d",
- bNumInterface,
- bAlternateSetting,
- interface_instance->alternates);
-
- if (! (alternate_instance = usbd_device_alternate_instance (device, port, index, bNumInterface, bAlternateSetting))) {
- dbg_ep0 (3, "[%d] alternate_instance NULL",
- bNumInterface);
- return -1;
- }
- /* copy descriptor for this interface */
- copy_config (urb, alternate_instance->interface_descriptor,
- sizeof (struct usb_interface_descriptor),
- max);
-
- /*dbg_ep0(3, "[%d:%d] classes: %d endpoints: %d", bNumInterface, bAlternateSetting, */
- /* alternate_instance->classes, alternate_instance->endpoints); */
-
- /* iterate across classes for this alternate interface */
-#if 0
- for (class = 0;
- class < alternate_instance->classes;
- class++) {
- struct usb_class_descriptor *class_descriptor;
- /*dbg_ep0(3, "[%d:%d:%d] classes: %d", bNumInterface, bAlternateSetting, */
- /* class, alternate_instance->classes); */
- if (!(class_descriptor = usbd_device_class_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, class))) {
- dbg_ep0 (3, "[%d] class NULL",
- class);
- return -1;
- }
- /* copy descriptor for this class */
- copy_config (urb, class_descriptor,
- sizeof (struct usb_class_descriptor),
- max);
- }
-#endif
-
- /* iterate across endpoints for this alternate interface */
- interface_descriptor = alternate_instance->interface_descriptor;
- for (bNumEndpoint = 0;
- bNumEndpoint < alternate_instance->endpoints;
- bNumEndpoint++) {
- struct usb_endpoint_descriptor *endpoint_descriptor;
- dbg_ep0 (3, "[%d:%d:%d] endpoint: %d",
- bNumInterface,
- bAlternateSetting,
- bNumEndpoint,
- interface_descriptor->
- bNumEndpoints);
- if (!(endpoint_descriptor = usbd_device_endpoint_descriptor_index (device, port, index, bNumInterface, bAlternateSetting, bNumEndpoint))) {
- dbg_ep0 (3, "[%d] endpoint NULL",
- bNumEndpoint);
- return -1;
- }
- /* copy descriptor for this endpoint */
- copy_config (urb, endpoint_descriptor,
- sizeof (struct usb_endpoint_descriptor),
- max);
- }
- }
- }
- dbg_ep0 (3, "lengths: %d %d",
- le16_to_cpu (configuration_descriptor->wTotalLength),
- urb->actual_length);
}
+
break;
case USB_DESCRIPTOR_TYPE_STRING:
{
struct usb_string_descriptor *string_descriptor;
-
if (!(string_descriptor = usbd_get_string (index))) {
+ serial_printf("Invalid string index %d\n", index);
return -1;
}
- /*dbg_ep0(3, "string_descriptor: %p", string_descriptor); */
+ dbg_ep0(3, "string_descriptor: %p length %d", string_descriptor, string_descriptor->bLength);
copy_config (urb, string_descriptor, string_descriptor->bLength, max);
}
break;
case USB_DESCRIPTOR_TYPE_INTERFACE:
+ serial_printf("USB_DESCRIPTOR_TYPE_INTERFACE - error not implemented\n");
return -1;
case USB_DESCRIPTOR_TYPE_ENDPOINT:
+ serial_printf("USB_DESCRIPTOR_TYPE_ENDPOINT - error not implemented\n");
return -1;
case USB_DESCRIPTOR_TYPE_HID:
{
+ serial_printf("USB_DESCRIPTOR_TYPE_HID - error not implemented\n");
return -1; /* unsupported at this time */
#if 0
int bNumInterface =
@@ -403,6 +309,7 @@
break;
case USB_DESCRIPTOR_TYPE_REPORT:
{
+ serial_printf("USB_DESCRIPTOR_TYPE_REPORT - error not implemented\n");
return -1; /* unsupported at this time */
#if 0
int bNumInterface =
@@ -434,12 +341,19 @@
#endif
}
break;
+ case USB_DESCRIPTOR_TYPE_DEVICE_QUALIFIER:
+ {
+ /* If a USB device supports both a full speed and low speed operation
+ * we must send a Device_Qualifier descriptor here
+ */
+ return -1;
+ }
default:
return -1;
}
- dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d packet size: %2d",
+ dbg_ep0 (1, "urb: buffer: %p buffer_length: %2d actual_length: %2d tx_packetSize: %2d",
urb->buffer, urb->buffer_length, urb->actual_length,
device->bus->endpoint_array[0].tx_packetSize);
/*
@@ -495,6 +409,12 @@
/* handle USB Standard Request (c.f. USB Spec table 9-2) */
if ((request->bmRequestType & USB_REQ_TYPE_MASK) != 0) {
+ if(device->device_state <= STATE_CONFIGURED){
+ /* Attempt to handle a CDC specific request if we are
+ * in the configured state.
+ */
+ return device->cdc_recv_setup(request,urb);
+ }
dbg_ep0 (1, "non standard request: %x",
request->bmRequestType & USB_REQ_TYPE_MASK);
return -1; /* Stall here */
@@ -567,6 +487,7 @@
le16_to_cpu (request->wValue) & 0xff);
case USB_REQ_GET_CONFIGURATION:
+ serial_printf("get config %d\n", device->configuration);
return ep0_get_one (device, urb,
device->configuration);
@@ -642,7 +563,6 @@
/*dbg_ep0(2, "address: %d %d %d", */
/* request->wValue, le16_to_cpu(request->wValue), device->address); */
- serial_printf ("DEVICE_ADDRESS_ASSIGNED.. event?\n");
return 0;
case USB_REQ_SET_DESCRIPTOR: /* XXX should we support this? */
@@ -653,9 +573,10 @@
/* c.f. 9.4.7 - the top half of wValue is reserved */
/* */
if ((device->configuration =
- le16_to_cpu (request->wValue) & 0x7f) != 0) {
+ le16_to_cpu (request->wValue) & 0xFF80) != 0) {
/* c.f. 9.4.7 - zero is the default or addressed state, in our case this */
/* is the same is configuration zero */
+ serial_printf("error setting dev->config to zero!\n");
device->configuration = 0; /* TBR - ?????? */
}
/* reset interface and alternate settings */
diff --git a/drivers/usbdcore_mpc8xx.c b/drivers/usbdcore_mpc8xx.c
new file mode 100644
index 0000000..e87284b
--- /dev/null
+++ b/drivers/usbdcore_mpc8xx.c
@@ -0,0 +1,1400 @@
+/*
+ * Copyright (C) 2006 by Bryan O'Donoghue, CodeHermit
+ * bodonoghue@CodeHermit.ie
+ *
+ * References
+ * DasUBoot/drivers/usbdcore_omap1510.c, for design and implementation ideas.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+/*
+ * Notes :
+ * 1. #define __SIMULATE_ERROR__ to inject a CRC error into every 2nd TX
+ * packet to force the USB re-transmit protocol.
+ *
+ * 2. #define __DEBUG_UDC__ to switch on debug tracing to serial console
+ * be careful that tracing doesn't create Hiesen-bugs with respect to
+ * response timeouts to control requests.
+ *
+ * 3. This driver should be able to support any higher level driver that
+ * that wants to do either of the two standard UDC implementations
+ * Control-Bulk-Interrupt or Bulk-IN/Bulk-Out standards. Hence
+ * gserial and cdc_acm should work with this code.
+ *
+ * 4. NAK events never actually get raised at all, the documentation
+ * is just wrong !
+ *
+ * 5. For some reason, cbd_datlen is *always* +2 the value it should be.
+ * this means that having an RX cbd of 16 bytes is not possible, since
+ * the same size is reported for 14 bytes received as 16 bytes received
+ * until we can find out why this happens, RX cbds must be limited to 8
+ * bytes. TODO: check errata for this behaviour.
+ *
+ * 6. Right now this code doesn't support properly powering up with the USB
+ * cable attached to the USB host my development board the Adder87x doesn't
+ * have a pull-up fitted to allow this, so it is necessary to power the
+ * board and *then* attached the USB cable to the host. However somebody
+ * with a different design in their board may be able to keep the cable
+ * constantly connected and simply enable/disable a pull-up re
+ * figure 31.1 in MPC885RM.pdf instead of having to power up the board and
+ * then attach the cable !
+ *
+ */
+#include <common.h>
+#include <config.h>
+
+#if defined(CONFIG_MPC885_FAMILY) && defined(CONFIG_USB_DEVICE)
+#include <commproc.h>
+#include "usbdcore.h"
+#include "usbdcore_mpc8xx.h"
+#include "usbdcore_ep0.h"
+
+#define ERR(fmt, args...)\
+ serial_printf("ERROR : [%s] %s:%d: "fmt,\
+ __FILE__,__FUNCTION__,__LINE__, ##args)
+#ifdef __DEBUG_UDC__
+#define DBG(fmt,args...)\
+ serial_printf("[%s] %s:%d: "fmt,\
+ __FILE__,__FUNCTION__,__LINE__, ##args)
+#else
+#define DBG(fmt,args...)
+#endif
+
+/* Static Data */
+#ifdef __SIMULATE_ERROR__
+static char err_poison_test = 0;
+#endif
+static struct mpc8xx_ep ep_ref[MAX_ENDPOINTS];
+static u32 address_base = STATE_NOT_READY;
+static mpc8xx_udc_state_t udc_state = 0;
+static struct usb_device_instance *udc_device = 0;
+static volatile usb_epb_t *endpoints[MAX_ENDPOINTS];
+static volatile cbd_t *tx_cbd[TX_RING_SIZE];
+static volatile cbd_t *rx_cbd[RX_RING_SIZE];
+static volatile immap_t *immr = 0;
+static volatile cpm8xx_t *cp = 0;
+static volatile usb_pram_t *usb_paramp = 0;
+static volatile usb_t *usbp = 0;
+static int rx_ct = 0;
+static int tx_ct = 0;
+
+/* Static Function Declarations */
+static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
+ usb_device_state_t final);
+static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
+ usb_device_state_t final);
+static void mpc8xx_udc_stall (unsigned int ep);
+static void mpc8xx_udc_flush_tx_fifo (int epid);
+static void mpc8xx_udc_flush_rx_fifo (void);
+static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi,
+ struct urb *tx_urb);
+static void mpc8xx_udc_dump_request (struct usb_device_request *request);
+static void mpc8xx_udc_clock_init (volatile immap_t * immr,
+ volatile cpm8xx_t * cp);
+static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi);
+static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_cbd_init (void);
+static void mpc8xx_udc_endpoint_init (void);
+static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size);
+static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment);
+static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp);
+static void mpc8xx_udc_set_nak (unsigned int ep);
+static short mpc8xx_udc_handle_txerr (void);
+static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid);
+
+/******************************************************************************
+ Global Linkage
+ *****************************************************************************/
+
+/* udc_init
+ *
+ * Do initial bus gluing
+ */
+int udc_init (void)
+{
+ /* Init various pointers */
+ immr = (immap_t *) CFG_IMMR;
+ cp = (cpm8xx_t *) & (immr->im_cpm);
+ usb_paramp = (usb_pram_t *) & (cp->cp_dparam[PROFF_USB]);
+ usbp = (usb_t *) & (cp->cp_scc[0]);
+
+ memset (ep_ref, 0x00, (sizeof (struct mpc8xx_ep) * MAX_ENDPOINTS));
+
+ udc_device = 0;
+ udc_state = STATE_NOT_READY;
+
+ usbp->usmod = 0x00;
+ usbp->uscom = 0;
+
+ /* Set USB Frame #0, Respond at Address & Get a clock source */
+ usbp->usaddr = 0x00;
+ mpc8xx_udc_clock_init (immr, cp);
+
+ /* PA15, PA14 as perhiperal USBRXD and USBOE */
+ immr->im_ioport.iop_padir &= ~0x0003;
+ immr->im_ioport.iop_papar |= 0x0003;
+
+ /* PC11/PC10 as peripheral USBRXP USBRXN */
+ immr->im_ioport.iop_pcso |= 0x0030;
+
+ /* PC7/PC6 as perhiperal USBTXP and USBTXN */
+ immr->im_ioport.iop_pcdir |= 0x0300;
+ immr->im_ioport.iop_pcpar |= 0x0300;
+
+ /* Set the base address */
+ address_base = (u32) (cp->cp_dpmem + CPM_USB_BASE);
+
+ /* Initialise endpoints and circular buffers */
+ mpc8xx_udc_endpoint_init ();
+ mpc8xx_udc_cbd_init ();
+
+ /* Assign allocated Dual Port Endpoint descriptors */
+ usb_paramp->ep0ptr = (u32) endpoints[0];
+ usb_paramp->ep1ptr = (u32) endpoints[1];
+ usb_paramp->ep2ptr = (u32) endpoints[2];
+ usb_paramp->ep3ptr = (u32) endpoints[3];
+ usb_paramp->frame_n = 0;
+
+ DBG ("ep0ptr=0x%08x ep1ptr=0x%08x ep2ptr=0x%08x ep3ptr=0x%08x\n",
+ usb_paramp->ep0ptr, usb_paramp->ep1ptr, usb_paramp->ep2ptr,
+ usb_paramp->ep3ptr);
+
+ return 0;
+}
+
+/* udc_irq
+ *
+ * Poll for whatever events may have occured
+ */
+void udc_irq (void)
+{
+ int epid = 0;
+ volatile cbd_t *rx_cbdp = 0;
+ volatile cbd_t *rx_cbdp_base = 0;
+
+ if (udc_state != STATE_READY) {
+ return;
+ }
+
+ if (usbp->usber & USB_E_BSY) {
+ /* This shouldn't happen. If it does then it's a bug ! */
+ usbp->usber |= USB_E_BSY;
+ mpc8xx_udc_flush_rx_fifo ();
+ }
+
+ /* Scan all RX/Bidirectional Endpoints for RX data. */
+ for (epid = 0; epid < MAX_ENDPOINTS; epid++) {
+ if (!ep_ref[epid].prx) {
+ continue;
+ }
+ rx_cbdp = rx_cbdp_base = ep_ref[epid].prx;
+
+ do {
+ if (!(rx_cbdp->cbd_sc & RX_BD_E)) {
+
+ if (rx_cbdp->cbd_sc & 0x1F) {
+ /* Corrupt data discard it.
+ * Controller has NAK'd this packet.
+ */
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+ } else {
+ if (!epid) {
+ mpc8xx_udc_ep0_rx (rx_cbdp);
+
+ } else {
+ /* Process data */
+ mpc8xx_udc_set_nak (epid);
+ mpc8xx_udc_epn_rx (epid, rx_cbdp);
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+ }
+ }
+
+ /* Advance RX CBD pointer */
+ mpc8xx_udc_advance_rx (&rx_cbdp, epid);
+ ep_ref[epid].prx = rx_cbdp;
+ } else {
+ /* Advance RX CBD pointer */
+ mpc8xx_udc_advance_rx (&rx_cbdp, epid);
+ }
+
+ } while (rx_cbdp != rx_cbdp_base);
+ }
+
+ /* Handle TX events as appropiate, the correct place to do this is
+ * in a tx routine. Perhaps TX on epn was pre-empted by ep0
+ */
+
+ if (usbp->usber & USB_E_TXB) {
+ usbp->usber |= USB_E_TXB;
+ }
+
+ if (usbp->usber & (USB_TX_ERRMASK)) {
+ mpc8xx_udc_handle_txerr ();
+ }
+
+ /* Switch to the default state, respond at the default address */
+ if (usbp->usber & USB_E_RESET) {
+ usbp->usber |= USB_E_RESET;
+ usbp->usaddr = 0x00;
+ udc_device->device_state = STATE_DEFAULT;
+ }
+
+ /* if(usbp->usber&USB_E_IDLE){
+ We could suspend here !
+ usbp->usber|=USB_E_IDLE;
+ DBG("idle state change\n");
+ }
+ if(usbp->usbs){
+ We could resume here when IDLE is deasserted !
+ Not worth doing, so long as we are self powered though.
+ }
+ */
+
+ return;
+}
+
+/* udc_endpoint_write
+ *
+ * Write some data to an endpoint
+ */
+int udc_endpoint_write (struct usb_endpoint_instance *epi)
+{
+ int ep = 0;
+ short epid = 1, unnak = 0, ret = 0;
+
+ if (udc_state != STATE_READY) {
+ ERR ("invalid udc_state != STATE_READY!\n");
+ return -1;
+ }
+
+ if (!udc_device || !epi) {
+ return -1;
+ }
+
+ if (udc_device->device_state != STATE_CONFIGURED) {
+ return -1;
+ }
+
+ ep = epi->endpoint_address & 0x03;
+ if (ep >= MAX_ENDPOINTS) {
+ return -1;
+ }
+
+ /* Set NAK for all RX endpoints during TX */
+ for (epid = 1; epid < MAX_ENDPOINTS; epid++) {
+
+ /* Don't set NAK on DATA IN/CONTROL endpoints */
+ if (ep_ref[epid].sc & USB_DIR_IN) {
+ continue;
+ }
+
+ if (!(usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK))) {
+ unnak |= 1 << epid;
+ }
+
+ mpc8xx_udc_set_nak (epid);
+ }
+
+ mpc8xx_udc_init_tx (&udc_device->bus->endpoint_array[ep],
+ epi->tx_urb);
+ ret = mpc8xx_udc_ep_tx (&udc_device->bus->endpoint_array[ep]);
+
+ /* Remove temporary NAK */
+ for (epid = 1; epid < MAX_ENDPOINTS; epid++) {
+ if (unnak & (1 << epid)) {
+ udc_unset_nak (epid);
+ }
+ }
+
+ return ret;
+}
+
+/* mpc8xx_udc_assign_urb
+ *
+ * Associate a given urb to an endpoint TX or RX transmit/receive buffers
+ */
+static int mpc8xx_udc_assign_urb (int ep, char direction)
+{
+ struct usb_endpoint_instance *epi = 0;
+
+ if (ep >= MAX_ENDPOINTS) {
+ goto err;
+ }
+ epi = &udc_device->bus->endpoint_array[ep];
+ if (!epi) {
+ goto err;
+ }
+
+ if (!ep_ref[ep].urb) {
+ ep_ref[ep].urb = usbd_alloc_urb (udc_device, udc_device->bus->endpoint_array);
+ if (!ep_ref[ep].urb) {
+ goto err;
+ }
+ } else {
+ ep_ref[ep].urb->actual_length = 0;
+ }
+
+ switch (direction) {
+ case USB_DIR_IN:
+ epi->tx_urb = ep_ref[ep].urb;
+ break;
+ case USB_DIR_OUT:
+ epi->rcv_urb = ep_ref[ep].urb;
+ break;
+ default:
+ goto err;
+ }
+ return 0;
+
+ err:
+ udc_state = STATE_ERROR;
+ return -1;
+}
+
+/* udc_setup_ep
+ *
+ * Associate U-Boot software endpoints to mpc8xx endpoint parameter ram
+ * Isochronous endpoints aren't yet supported!
+ */
+void udc_setup_ep (struct usb_device_instance *device, unsigned int ep,
+ struct usb_endpoint_instance *epi)
+{
+ uchar direction = 0;
+ int ep_attrib = 0;
+
+ if (epi && (ep < MAX_ENDPOINTS)) {
+
+ if (ep == 0) {
+ if (epi->rcv_attributes != USB_ENDPOINT_XFER_CONTROL
+ || epi->tx_attributes !=
+ USB_ENDPOINT_XFER_CONTROL) {
+
+ /* ep0 must be a control endpoint */
+ udc_state = STATE_ERROR;
+ return;
+
+ }
+ if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+ mpc8xx_udc_cbd_attach (ep, epi->tx_packetSize,
+ epi->rcv_packetSize);
+ }
+ usbp->usep[ep] = 0x0000;
+ return;
+ }
+
+ if ((epi->endpoint_address & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN) {
+
+ direction = 1;
+ ep_attrib = epi->tx_attributes;
+ epi->rcv_packetSize = 0;
+ ep_ref[ep].sc |= USB_DIR_IN;
+ } else {
+
+ direction = 0;
+ ep_attrib = epi->rcv_attributes;
+ epi->tx_packetSize = 0;
+ ep_ref[ep].sc &= ~USB_DIR_IN;
+ }
+
+ if (mpc8xx_udc_assign_urb (ep, epi->endpoint_address
+ & USB_ENDPOINT_DIR_MASK)) {
+ return;
+ }
+
+ switch (ep_attrib) {
+ case USB_ENDPOINT_XFER_CONTROL:
+ if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+ mpc8xx_udc_cbd_attach (ep,
+ epi->tx_packetSize,
+ epi->rcv_packetSize);
+ }
+ usbp->usep[ep] = ep << 12;
+ epi->rcv_urb = epi->tx_urb = ep_ref[ep].urb;
+
+ break;
+ case USB_ENDPOINT_XFER_BULK:
+ case USB_ENDPOINT_XFER_INT:
+ if (!(ep_ref[ep].sc & EP_ATTACHED)) {
+ if (direction) {
+ mpc8xx_udc_cbd_attach (ep,
+ epi->tx_packetSize,
+ 0);
+ } else {
+ mpc8xx_udc_cbd_attach (ep,
+ 0,
+ epi->rcv_packetSize);
+ }
+ }
+ usbp->usep[ep] = (ep << 12) | ((ep_attrib) << 8);
+
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ default:
+ serial_printf ("Error endpoint attrib %d>3\n", ep_attrib);
+ udc_state = STATE_ERROR;
+ break;
+ }
+ }
+
+}
+
+/* udc_connect
+ *
+ * Move state, switch on the USB
+ */
+void udc_connect (void)
+{
+ /* Enable pull-up resistor on D+
+ * TODO: fit a pull-up resistor to drive SE0 for > 2.5us
+ */
+
+ if (udc_state != STATE_ERROR) {
+ udc_state = STATE_READY;
+ usbp->usmod |= USMOD_EN;
+ }
+}
+
+/* udc_disconnect
+ *
+ * Disconnect is not used but, is included for completeness
+ */
+void udc_disconnect (void)
+{
+ /* Disable pull-up resistor on D-
+ * TODO: fix a pullup resistor to control this
+ */
+
+ if (udc_state != STATE_ERROR) {
+ udc_state = STATE_NOT_READY;
+ }
+ usbp->usmod &= ~USMOD_EN;
+}
+
+/* udc_enable
+ *
+ * Grab an EP0 URB, register interest in a subset of USB events
+ */
+void udc_enable (struct usb_device_instance *device)
+{
+ if (udc_state == STATE_ERROR) {
+ return;
+ }
+
+ udc_device = device;
+
+ if (!ep_ref[0].urb) {
+ ep_ref[0].urb = usbd_alloc_urb (device, device->bus->endpoint_array);
+ }
+
+ /* Register interest in all events except SOF, enable transceiver */
+ usbp->usber = 0x03FF;
+ usbp->usbmr = 0x02F7;
+
+ return;
+}
+
+/* udc_disable
+ *
+ * disable the currently hooked device
+ */
+void udc_disable (void)
+{
+ int i = 0;
+
+ if (udc_state == STATE_ERROR) {
+ DBG ("Won't disable UDC. udc_state==STATE_ERROR !\n");
+ return;
+ }
+
+ udc_device = 0;
+
+ for (; i < MAX_ENDPOINTS; i++) {
+ if (ep_ref[i].urb) {
+ usbd_dealloc_urb (ep_ref[i].urb);
+ ep_ref[i].urb = 0;
+ }
+ }
+
+ usbp->usbmr = 0x00;
+ usbp->usmod = ~USMOD_EN;
+ udc_state = STATE_NOT_READY;
+}
+
+/* udc_startup_events
+ *
+ * Enable the specified device
+ */
+void udc_startup_events (struct usb_device_instance *device)
+{
+ udc_enable (device);
+ if (udc_state == STATE_READY) {
+ usbd_device_event_irq (device, DEVICE_CREATE, 0);
+ }
+}
+
+/* udc_set_nak
+ *
+ * Allow upper layers to signal lower layers should not accept more RX data
+ *
+ */
+void udc_set_nak (int epid)
+{
+ if (epid) {
+ mpc8xx_udc_set_nak (epid);
+ }
+}
+
+/* udc_unset_nak
+ *
+ * Suspend sending of NAK tokens for DATA OUT tokens on a given endpoint.
+ * Switch off NAKing on this endpoint to accept more data output from host.
+ *
+ */
+void udc_unset_nak (int epid)
+{
+ if (epid > MAX_ENDPOINTS) {
+ return;
+ }
+
+ if (usbp->usep[epid] & (USEP_THS_NAK | USEP_RHS_NAK)) {
+ usbp->usep[epid] &= ~(USEP_THS_NAK | USEP_RHS_NAK);
+ __asm__ ("eieio");
+ }
+}
+
+/******************************************************************************
+ Static Linkage
+******************************************************************************/
+
+/* udc_state_transition_up
+ * udc_state_transition_down
+ *
+ * Helper functions to implement device state changes. The device states and
+ * the events that transition between them are:
+ *
+ * STATE_ATTACHED
+ * || /\
+ * \/ ||
+ * DEVICE_HUB_CONFIGURED DEVICE_HUB_RESET
+ * || /\
+ * \/ ||
+ * STATE_POWERED
+ * || /\
+ * \/ ||
+ * DEVICE_RESET DEVICE_POWER_INTERRUPTION
+ * || /\
+ * \/ ||
+ * STATE_DEFAULT
+ * || /\
+ * \/ ||
+ * DEVICE_ADDRESS_ASSIGNED DEVICE_RESET
+ * || /\
+ * \/ ||
+ * STATE_ADDRESSED
+ * || /\
+ * \/ ||
+ * DEVICE_CONFIGURED DEVICE_DE_CONFIGURED
+ * || /\
+ * \/ ||
+ * STATE_CONFIGURED
+ *
+ * udc_state_transition_up transitions up (in the direction from STATE_ATTACHED
+ * to STATE_CONFIGURED) from the specified initial state to the specified final
+ * state, passing through each intermediate state on the way. If the initial
+ * state is at or above (i.e. nearer to STATE_CONFIGURED) the final state, then
+ * no state transitions will take place.
+ *
+ * udc_state_transition_down transitions down (in the direction from
+ * STATE_CONFIGURED to STATE_ATTACHED) from the specified initial state to the
+ * specified final state, passing through each intermediate state on the way.
+ * If the initial state is at or below (i.e. nearer to STATE_ATTACHED) the final
+ * state, then no state transitions will take place.
+ *
+ */
+
+static void mpc8xx_udc_state_transition_up (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial < final) {
+ switch (initial) {
+ case STATE_ATTACHED:
+ usbd_device_event_irq (udc_device,
+ DEVICE_HUB_CONFIGURED, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device,
+ DEVICE_ADDRESS_ASSIGNED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_CONFIGURED,
+ 0);
+ case STATE_CONFIGURED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+static void mpc8xx_udc_state_transition_down (usb_device_state_t initial,
+ usb_device_state_t final)
+{
+ if (initial > final) {
+ switch (initial) {
+ case STATE_CONFIGURED:
+ usbd_device_event_irq (udc_device,
+ DEVICE_DE_CONFIGURED, 0);
+ if (final == STATE_ADDRESSED)
+ break;
+ case STATE_ADDRESSED:
+ usbd_device_event_irq (udc_device, DEVICE_RESET, 0);
+ if (final == STATE_DEFAULT)
+ break;
+ case STATE_DEFAULT:
+ usbd_device_event_irq (udc_device,
+ DEVICE_POWER_INTERRUPTION, 0);
+ if (final == STATE_POWERED)
+ break;
+ case STATE_POWERED:
+ usbd_device_event_irq (udc_device, DEVICE_HUB_RESET,
+ 0);
+ case STATE_ATTACHED:
+ break;
+ default:
+ break;
+ }
+ }
+}
+
+/* mpc8xx_udc_stall
+ *
+ * Force returning of STALL tokens on the given endpoint. Protocol or function
+ * STALL conditions are permissable here
+ */
+static void mpc8xx_udc_stall (unsigned int ep)
+{
+ usbp->usep[ep] |= STALL_BITMASK;
+}
+
+/* mpc8xx_udc_set_nak
+ *
+ * Force returning of NAK responses for the given endpoint as a kind of very
+ * simple flow control
+ */
+static void mpc8xx_udc_set_nak (unsigned int ep)
+{
+ usbp->usep[ep] |= NAK_BITMASK;
+ __asm__ ("eieio");
+}
+
+/* mpc8xx_udc_handle_txerr
+ *
+ * Handle errors relevant to TX. Return a status code to allow calling
+ * indicative of what if anything happened
+ */
+static short mpc8xx_udc_handle_txerr ()
+{
+ short ep = 0, ret = 0;
+
+ for (; ep < TX_RING_SIZE; ep++) {
+ if (usbp->usber & (0x10 << ep)) {
+
+ /* Timeout or underrun */
+ if (tx_cbd[ep]->cbd_sc & 0x06) {
+ ret = 1;
+ mpc8xx_udc_flush_tx_fifo (ep);
+
+ } else {
+ if (usbp->usep[ep] & STALL_BITMASK) {
+ if (!ep) {
+ usbp->usep[ep] &= ~STALL_BITMASK;
+ }
+ } /* else NAK */
+ }
+ usbp->usber |= (0x10 << ep);
+ }
+ }
+ return ret;
+}
+
+/* mpc8xx_udc_advance_rx
+ *
+ * Advance cbd rx
+ */
+static void mpc8xx_udc_advance_rx (volatile cbd_t ** rx_cbdp, int epid)
+{
+ if ((*rx_cbdp)->cbd_sc & RX_BD_W) {
+ *rx_cbdp = (volatile cbd_t *) (endpoints[epid]->rbase + CFG_IMMR);
+
+ } else {
+ (*rx_cbdp)++;
+ }
+}
+
+
+/* mpc8xx_udc_flush_tx_fifo
+ *
+ * Flush a given TX fifo. Assumes one tx cbd per endpoint
+ */
+static void mpc8xx_udc_flush_tx_fifo (int epid)
+{
+ volatile cbd_t *tx_cbdp = 0;
+
+ if (epid > MAX_ENDPOINTS) {
+ return;
+ }
+
+ /* TX stop */
+ immr->im_cpm.cp_cpcr = ((epid << 2) | 0x1D01);
+ __asm__ ("eieio");
+ while (immr->im_cpm.cp_cpcr & 0x01);
+
+ usbp->uscom = 0x40 | 0;
+
+ /* reset ring */
+ tx_cbdp = (cbd_t *) (endpoints[epid]->tbptr + CFG_IMMR);
+ tx_cbdp->cbd_sc = (TX_BD_I | TX_BD_W);
+
+
+ endpoints[epid]->tptr = endpoints[epid]->tbase;
+ endpoints[epid]->tstate = 0x00;
+ endpoints[epid]->tbcnt = 0x00;
+
+ /* TX start */
+ immr->im_cpm.cp_cpcr = ((epid << 2) | 0x2D01);
+ __asm__ ("eieio");
+ while (immr->im_cpm.cp_cpcr & 0x01);
+
+ return;
+}
+
+/* mpc8xx_udc_flush_rx_fifo
+ *
+ * For the sake of completeness of the namespace, it seems like
+ * a good-design-decision (tm) to include mpc8xx_udc_flush_rx_fifo();
+ * If RX_BD_E is true => a driver bug either here or in an upper layer
+ * not polling frequently enough. If RX_BD_E is true we have told the host
+ * we have accepted data but, the CPM found it had no-where to put that data
+ * which needless to say would be a bad thing.
+ */
+static void mpc8xx_udc_flush_rx_fifo ()
+{
+ int i = 0;
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) {
+ ERR ("buf %p used rx data len = 0x%x sc=0x%x!\n",
+ rx_cbd[i], rx_cbd[i]->cbd_datlen,
+ rx_cbd[i]->cbd_sc);
+
+ }
+ }
+ ERR ("BUG : Input over-run\n");
+}
+
+/* mpc8xx_udc_clear_rxbd
+ *
+ * Release control of RX CBD to CP.
+ */
+static void mpc8xx_udc_clear_rxbd (volatile cbd_t * rx_cbdp)
+{
+ rx_cbdp->cbd_datlen = 0x0000;
+ rx_cbdp->cbd_sc = ((rx_cbdp->cbd_sc & RX_BD_W) | (RX_BD_E | RX_BD_I));
+ __asm__ ("eieio");
+}
+
+/* mpc8xx_udc_tx_irq
+ *
+ * Parse for tx timeout, control RX or USB reset/busy conditions
+ * Return -1 on timeout, -2 on fatal error, else return zero
+ */
+static int mpc8xx_udc_tx_irq (int ep)
+{
+ int i = 0;
+
+ if (usbp->usber & (USB_TX_ERRMASK)) {
+ if (mpc8xx_udc_handle_txerr ()) {
+ /* Timeout, controlling function must retry send */
+ return -1;
+ }
+ }
+
+ if (usbp->usber & (USB_E_RESET | USB_E_BSY)) {
+ /* Fatal, abandon TX transaction */
+ return -2;
+ }
+
+ if (usbp->usber & USB_E_RXB) {
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ if (!(rx_cbd[i]->cbd_sc & RX_BD_E)) {
+ if ((rx_cbd[i] == ep_ref[0].prx) || ep) {
+ return -2;
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+/* mpc8xx_udc_ep_tx
+ *
+ * Transmit in a re-entrant fashion outbound USB packets.
+ * Implement retry/timeout mechanism described in USB specification
+ * Toggle DATA0/DATA1 pids as necessary
+ * Introduces non-standard tx_retry. The USB standard has no scope for slave
+ * devices to give up TX, however tx_retry stops us getting stuck in an endless
+ * TX loop.
+ */
+static int mpc8xx_udc_ep_tx (struct usb_endpoint_instance *epi)
+{
+ struct urb *urb = epi->tx_urb;
+ volatile cbd_t *tx_cbdp = 0;
+ unsigned int ep = 0, pkt_len = 0, x = 0, tx_retry = 0;
+ int ret = 0;
+
+ if (!epi || (epi->endpoint_address & 0x03) >= MAX_ENDPOINTS || !urb) {
+ return -1;
+ }
+
+ ep = epi->endpoint_address & 0x03;
+ tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+
+ if (tx_cbdp->cbd_sc & TX_BD_R || usbp->usber & USB_E_TXB) {
+ mpc8xx_udc_flush_tx_fifo (ep);
+ usbp->usber |= USB_E_TXB;
+ };
+
+ while (tx_retry++ < 100) {
+ ret = mpc8xx_udc_tx_irq (ep);
+ if (ret == -1) {
+ /* ignore timeout here */
+ } else if (ret == -2) {
+ /* Abandon TX */
+ mpc8xx_udc_flush_tx_fifo (ep);
+ return -1;
+ }
+
+ tx_cbdp = (cbd_t *) (endpoints[ep]->tbptr + CFG_IMMR);
+ while (tx_cbdp->cbd_sc & TX_BD_R) {
+ };
+ tx_cbdp->cbd_sc = (tx_cbdp->cbd_sc & TX_BD_W);
+
+ pkt_len = urb->actual_length - epi->sent;
+
+ if (pkt_len > epi->tx_packetSize || pkt_len > EP_MAX_PKT) {
+ pkt_len = MIN (epi->tx_packetSize, EP_MAX_PKT);
+ }
+
+ for (x = 0; x < pkt_len; x++) {
+ *((unsigned char *) (tx_cbdp->cbd_bufaddr + x)) =
+ urb->buffer[epi->sent + x];
+ }
+ tx_cbdp->cbd_datlen = pkt_len;
+ tx_cbdp->cbd_sc |= (CBD_TX_BITMASK | ep_ref[ep].pid);
+ __asm__ ("eieio");
+
+#ifdef __SIMULATE_ERROR__
+ if (++err_poison_test == 2) {
+ err_poison_test = 0;
+ tx_cbdp->cbd_sc &= ~TX_BD_TC;
+ }
+#endif
+
+ usbp->uscom = (USCOM_STR | ep);
+
+ while (!(usbp->usber & USB_E_TXB)) {
+ ret = mpc8xx_udc_tx_irq (ep);
+ if (ret == -1) {
+ /* TX timeout */
+ break;
+ } else if (ret == -2) {
+ if (usbp->usber & USB_E_TXB) {
+ usbp->usber |= USB_E_TXB;
+ }
+ mpc8xx_udc_flush_tx_fifo (ep);
+ return -1;
+ }
+ };
+
+ if (usbp->usber & USB_E_TXB) {
+ usbp->usber |= USB_E_TXB;
+ }
+
+ /* ACK must be present <= 18bit times from TX */
+ if (ret == -1) {
+ continue;
+ }
+
+ /* TX ACK : USB 2.0 8.7.2, Toggle PID, Advance TX */
+ epi->sent += pkt_len;
+ epi->last = MIN (urb->actual_length - epi->sent, epi->tx_packetSize);
+ TOGGLE_TX_PID (ep_ref[ep].pid);
+
+ if (epi->sent >= epi->tx_urb->actual_length) {
+
+ epi->tx_urb->actual_length = 0;
+ epi->sent = 0;
+
+ if (ep_ref[ep].sc & EP_SEND_ZLP) {
+ ep_ref[ep].sc &= ~EP_SEND_ZLP;
+ } else {
+ return 0;
+ }
+ }
+ }
+
+ ERR ("TX fail, endpoint 0x%x tx bytes 0x%x/0x%x\n", ep, epi->sent,
+ epi->tx_urb->actual_length);
+
+ return -1;
+}
+
+/* mpc8xx_udc_dump_request
+ *
+ * Dump a control request to console
+ */
+static void mpc8xx_udc_dump_request (struct usb_device_request *request)
+{
+ DBG ("bmRequestType:%02x bRequest:%02x wValue:%04x "
+ "wIndex:%04x wLength:%04x ?\n",
+ request->bmRequestType,
+ request->bRequest,
+ request->wValue, request->wIndex, request->wLength);
+
+ return;
+}
+
+/* mpc8xx_udc_ep0_rx_setup
+ *
+ * Decode received ep0 SETUP packet. return non-zero on error
+ */
+static int mpc8xx_udc_ep0_rx_setup (volatile cbd_t * rx_cbdp)
+{
+ unsigned int x = 0;
+ struct urb *purb = ep_ref[0].urb;
+ struct usb_endpoint_instance *epi =
+ &udc_device->bus->endpoint_array[0];
+
+ for (; x < rx_cbdp->cbd_datlen; x++) {
+ *(((unsigned char *) &ep_ref[0].urb->device_request) + x) =
+ *((unsigned char *) (rx_cbdp->cbd_bufaddr + x));
+ }
+
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+ if (ep0_recv_setup (purb)) {
+ mpc8xx_udc_dump_request (&purb->device_request);
+ return -1;
+ }
+
+ if ((purb->device_request.bmRequestType & USB_REQ_DIRECTION_MASK)
+ == USB_REQ_HOST2DEVICE) {
+
+ switch (purb->device_request.bRequest) {
+ case USB_REQ_SET_ADDRESS:
+ /* Send the Status OUT ZLP */
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ purb->actual_length = 0;
+ mpc8xx_udc_init_tx (epi, purb);
+ mpc8xx_udc_ep_tx (epi);
+
+ /* Move to the addressed state */
+ usbp->usaddr = udc_device->address;
+ mpc8xx_udc_state_transition_up (udc_device->device_state,
+ STATE_ADDRESSED);
+ return 0;
+
+ case USB_REQ_SET_CONFIGURATION:
+ if (!purb->device_request.wValue) {
+ /* Respond at default address */
+ usbp->usaddr = 0x00;
+ mpc8xx_udc_state_transition_down (udc_device->device_state,
+ STATE_ADDRESSED);
+ } else {
+ /* TODO: Support multiple configurations */
+ mpc8xx_udc_state_transition_up (udc_device->device_state,
+ STATE_CONFIGURED);
+ for (x = 1; x < MAX_ENDPOINTS; x++) {
+ if ((udc_device->bus->endpoint_array[x].endpoint_address & USB_ENDPOINT_DIR_MASK)
+ == USB_DIR_IN) {
+ ep_ref[x].pid = TX_BD_PID_DATA0;
+ } else {
+ ep_ref[x].pid = RX_BD_PID_DATA0;
+ }
+ /* Set configuration must unstall endpoints */
+ usbp->usep[x] &= ~STALL_BITMASK;
+ }
+ }
+ break;
+ default:
+ /* CDC/Vendor specific */
+ break;
+ }
+
+ /* Send ZLP as ACK in Status OUT phase */
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ purb->actual_length = 0;
+ mpc8xx_udc_init_tx (epi, purb);
+ mpc8xx_udc_ep_tx (epi);
+
+ } else {
+
+ if (purb->actual_length) {
+ ep_ref[0].pid = TX_BD_PID_DATA1;
+ mpc8xx_udc_init_tx (epi, purb);
+
+ if (!(purb->actual_length % EP0_MAX_PACKET_SIZE)) {
+ ep_ref[0].sc |= EP_SEND_ZLP;
+ }
+
+ if (purb->device_request.wValue ==
+ USB_DESCRIPTOR_TYPE_DEVICE) {
+ if (le16_to_cpu (purb->device_request.wLength)
+ > purb->actual_length) {
+ /* Send EP0_MAX_PACKET_SIZE bytes
+ * unless correct size requested.
+ */
+ if (purb->actual_length > epi->tx_packetSize) {
+ purb->actual_length = epi->tx_packetSize;
+ }
+ }
+ }
+ mpc8xx_udc_ep_tx (epi);
+
+ } else {
+ /* Corrupt SETUP packet? */
+ ERR ("Zero length data or SETUP with DATA-IN phase ?\n");
+ return 1;
+ }
+ }
+ return 0;
+}
+
+/* mpc8xx_udc_init_tx
+ *
+ * Setup some basic parameters for a TX transaction
+ */
+static void mpc8xx_udc_init_tx (struct usb_endpoint_instance *epi,
+ struct urb *tx_urb)
+{
+ epi->sent = 0;
+ epi->last = 0;
+ epi->tx_urb = tx_urb;
+}
+
+/* mpc8xx_udc_ep0_rx
+ *
+ * Receive ep0/control USB data. Parse and possibly send a response.
+ */
+static void mpc8xx_udc_ep0_rx (volatile cbd_t * rx_cbdp)
+{
+ if (rx_cbdp->cbd_sc & RX_BD_PID_SETUP) {
+
+ /* Unconditionally accept SETUP packets */
+ if (mpc8xx_udc_ep0_rx_setup (rx_cbdp)) {
+ mpc8xx_udc_stall (0);
+ }
+
+ } else {
+
+ mpc8xx_udc_clear_rxbd (rx_cbdp);
+
+ if ((rx_cbdp->cbd_datlen - 2)) {
+ /* SETUP with a DATA phase
+ * outside of SETUP packet.
+ * Reply with STALL.
+ */
+ mpc8xx_udc_stall (0);
+ }
+ }
+}
+
+/* mpc8xx_udc_epn_rx
+ *
+ * Receive some data from cbd into USB system urb data abstraction
+ * Upper layers should NAK if there is insufficient RX data space
+ */
+static int mpc8xx_udc_epn_rx (unsigned int epid, volatile cbd_t * rx_cbdp)
+{
+ struct usb_endpoint_instance *epi = 0;
+ struct urb *urb = 0;
+ unsigned int x = 0;
+
+ if (epid >= MAX_ENDPOINTS || !rx_cbdp->cbd_datlen) {
+ return 0;
+ }
+
+ /* USB 2.0 PDF section 8.6.4
+ * Discard data with invalid PID it is a resend.
+ */
+ if (ep_ref[epid].pid != (rx_cbdp->cbd_sc & 0xC0)) {
+ return 1;
+ }
+ TOGGLE_RX_PID (ep_ref[epid].pid);
+
+ epi = &udc_device->bus->endpoint_array[epid];
+ urb = epi->rcv_urb;
+
+ for (; x < (rx_cbdp->cbd_datlen - 2); x++) {
+ *((unsigned char *) (urb->buffer + urb->actual_length + x)) =
+ *((unsigned char *) (rx_cbdp->cbd_bufaddr + x));
+ }
+
+ if (x) {
+ usbd_rcv_complete (epi, x, 0);
+ if (ep_ref[epid].urb->status == RECV_ERROR) {
+ DBG ("RX error unset NAK\n");
+ udc_unset_nak (epid);
+ }
+ }
+ return x;
+}
+
+/* mpc8xx_udc_clock_init
+ *
+ * Obtain a clock reference for Full Speed Signaling
+ */
+static void mpc8xx_udc_clock_init (volatile immap_t * immr,
+ volatile cpm8xx_t * cp)
+{
+
+#if defined(CFG_USB_EXTC_CLK)
+
+ /* This has been tested with a 48MHz crystal on CLK6 */
+ switch (CFG_USB_EXTC_CLK) {
+ case 1:
+ immr->im_ioport.iop_papar |= 0x0100;
+ immr->im_ioport.iop_padir &= ~0x0100;
+ cp->cp_sicr |= 0x24;
+ break;
+ case 2:
+ immr->im_ioport.iop_papar |= 0x0200;
+ immr->im_ioport.iop_padir &= ~0x0200;
+ cp->cp_sicr |= 0x2D;
+ break;
+ case 3:
+ immr->im_ioport.iop_papar |= 0x0400;
+ immr->im_ioport.iop_padir &= ~0x0400;
+ cp->cp_sicr |= 0x36;
+ break;
+ case 4:
+ immr->im_ioport.iop_papar |= 0x0800;
+ immr->im_ioport.iop_padir &= ~0x0800;
+ cp->cp_sicr |= 0x3F;
+ break;
+ default:
+ udc_state = STATE_ERROR;
+ break;
+ }
+
+#elif defined(CFG_USB_BRGCLK)
+
+ /* This has been tested with brgclk == 50MHz */
+ DECLARE_GLOBAL_DATA_PTR;
+ int divisor = 0;
+
+ if (gd->cpu_clk < 48000000L) {
+ ERR ("brgclk is too slow for full-speed USB!\n");
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ /* Assume the brgclk is 'good enough', we want !(gd->cpu_clk%48Mhz)
+ * but, can /probably/ live with close-ish alternative rates.
+ */
+ divisor = (gd->cpu_clk / 48000000L) - 1;
+ cp->cp_sicr &= ~0x0000003F;
+
+ switch (CFG_USB_BRGCLK) {
+ case 1:
+ cp->cp_brgc1 |= (divisor | CPM_BRG_EN);
+ cp->cp_sicr &= ~0x2F;
+ break;
+ case 2:
+ cp->cp_brgc2 |= (divisor | CPM_BRG_EN);
+ cp->cp_sicr |= 0x00000009;
+ break;
+ case 3:
+ cp->cp_brgc3 |= (divisor | CPM_BRG_EN);
+ cp->cp_sicr |= 0x00000012;
+ break;
+ case 4:
+ cp->cp_brgc4 = (divisor | CPM_BRG_EN);
+ cp->cp_sicr |= 0x0000001B;
+ break;
+ default:
+ udc_state = STATE_ERROR;
+ break;
+ }
+
+#else
+#error "CFG_USB_EXTC_CLK or CFG_USB_BRGCLK must be defined"
+#endif
+
+}
+
+/* mpc8xx_udc_cbd_attach
+ *
+ * attach a cbd to and endpoint
+ */
+static void mpc8xx_udc_cbd_attach (int ep, uchar tx_size, uchar rx_size)
+{
+
+ if (!tx_cbd[ep] || !rx_cbd[ep] || ep >= MAX_ENDPOINTS) {
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ if (tx_size > USB_MAX_PKT || rx_size > USB_MAX_PKT ||
+ (!tx_size && !rx_size)) {
+ udc_state = STATE_ERROR;
+ return;
+ }
+
+ /* Attach CBD to appropiate Parameter RAM Endpoint data structure */
+ if (rx_size) {
+ endpoints[ep]->rbase = (u32) rx_cbd[rx_ct];
+ endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+ rx_ct++;
+
+ if (!ep) {
+
+ endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+ rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
+ rx_ct++;
+
+ } else {
+ rx_ct += 2;
+ endpoints[ep]->rbptr = (u32) rx_cbd[rx_ct];
+ rx_cbd[rx_ct]->cbd_sc |= RX_BD_W;
+ rx_ct++;
+ }
+
+ /* Where we expect to RX data on this endpoint */
+ ep_ref[ep].prx = rx_cbd[rx_ct - 1];
+ } else {
+
+ ep_ref[ep].prx = 0;
+ endpoints[ep]->rbase = 0;
+ endpoints[ep]->rbptr = 0;
+ }
+
+ if (tx_size) {
+ endpoints[ep]->tbase = (u32) tx_cbd[tx_ct];
+ endpoints[ep]->tbptr = (u32) tx_cbd[tx_ct];
+ tx_ct++;
+ } else {
+ endpoints[ep]->tbase = 0;
+ endpoints[ep]->tbptr = 0;
+ }
+
+ endpoints[ep]->tstate = 0;
+ endpoints[ep]->tbcnt = 0;
+ endpoints[ep]->mrblr = EP_MAX_PKT;
+ endpoints[ep]->rfcr = 0x18;
+ endpoints[ep]->tfcr = 0x18;
+ ep_ref[ep].sc |= EP_ATTACHED;
+
+ DBG ("ep %d rbase 0x%08x rbptr 0x%08x tbase 0x%08x tbptr 0x%08x prx = %p\n",
+ ep, endpoints[ep]->rbase, endpoints[ep]->rbptr,
+ endpoints[ep]->tbase, endpoints[ep]->tbptr,
+ ep_ref[ep].prx);
+
+ return;
+}
+
+/* mpc8xx_udc_cbd_init
+ *
+ * Allocate space for a cbd and allocate TX/RX data space
+ */
+static void mpc8xx_udc_cbd_init (void)
+{
+ int i = 0;
+
+ for (; i < TX_RING_SIZE; i++) {
+ tx_cbd[i] = (cbd_t *)
+ mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int));
+ }
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ rx_cbd[i] = (cbd_t *)
+ mpc8xx_udc_alloc (sizeof (cbd_t), sizeof (int));
+ }
+
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ tx_cbd[i]->cbd_bufaddr =
+ mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int));
+
+ tx_cbd[i]->cbd_sc = (TX_BD_I | TX_BD_W);
+ tx_cbd[i]->cbd_datlen = 0x0000;
+ }
+
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ rx_cbd[i]->cbd_bufaddr =
+ mpc8xx_udc_alloc (EP_MAX_PKT, sizeof (int));
+ rx_cbd[i]->cbd_sc = (RX_BD_I | RX_BD_E);
+ rx_cbd[i]->cbd_datlen = 0x0000;
+
+ }
+
+ return;
+}
+
+/* mpc8xx_udc_endpoint_init
+ *
+ * Attach an endpoint to some dpram
+ */
+static void mpc8xx_udc_endpoint_init (void)
+{
+ int i = 0;
+
+ for (; i < MAX_ENDPOINTS; i++) {
+ endpoints[i] = (usb_epb_t *)
+ mpc8xx_udc_alloc (sizeof (usb_epb_t), 32);
+ }
+}
+
+/* mpc8xx_udc_alloc
+ *
+ * Grab the address of some dpram
+ */
+static u32 mpc8xx_udc_alloc (u32 data_size, u32 alignment)
+{
+ u32 retaddr = address_base;
+
+ while (retaddr % alignment) {
+ retaddr++;
+ }
+ address_base += data_size;
+
+ return retaddr;
+}
+
+#endif /* CONFIG_MPC885_FAMILY && CONFIG_USB_DEVICE) */
diff --git a/drivers/usbdcore_omap1510.c b/drivers/usbdcore_omap1510.c
index 1d54a63..84bb936 100644
--- a/drivers/usbdcore_omap1510.c
+++ b/drivers/usbdcore_omap1510.c
@@ -1517,4 +1517,31 @@
udc_enable (device);
}
+/**
+ * udc_irq - do pseudo interrupts
+ */
+void udc_irq(void)
+{
+ /* Loop while we have interrupts.
+ * If we don't do this, the input chain
+ * polling delay is likely to miss
+ * host requests.
+ */
+ while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
+ /* Handle any new IRQs */
+ omap1510_udc_irq ();
+ omap1510_udc_noniso_irq ();
+ }
+}
+
+/* Flow control */
+void udc_set_nak(int epid)
+{
+ /* TODO: implement this functionality in omap1510 */
+}
+
+void udc_unset_nak (int epid)
+{
+ /* TODO: implement this functionality in omap1510 */
+}
#endif
diff --git a/drivers/usbtty.c b/drivers/usbtty.c
index ce4a12e..d41a00b 100644
--- a/drivers/usbtty.c
+++ b/drivers/usbtty.c
@@ -2,6 +2,9 @@
* (C) Copyright 2003
* Gerry Hamel, geh@ti.com, Texas Instruments
*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, bodonoghue@codehermit.ie
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -25,20 +28,42 @@
#include <circbuf.h>
#include <devices.h>
#include "usbtty.h"
+#include "usb_cdc_acm.h"
+#include "usbdescriptors.h"
+#include <config.h> /* If defined, override Linux identifiers with
+ * vendor specific ones */
#if 0
-#define TTYDBG(fmt,args...) serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
+#define TTYDBG(fmt,args...)\
+ serial_printf("[%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
#else
#define TTYDBG(fmt,args...) do{}while(0)
#endif
-#if 0
-#define TTYERR(fmt,args...) serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,__LINE__,##args)
+#if 1
+#define TTYERR(fmt,args...)\
+ serial_printf("ERROR![%s] %s %d: "fmt, __FILE__,__FUNCTION__,\
+ __LINE__,##args)
#else
#define TTYERR(fmt,args...) do{}while(0)
#endif
/*
+ * Defines
+ */
+#define NUM_CONFIGS 1
+#define MAX_INTERFACES 2
+#define NUM_ENDPOINTS 3
+#define ACM_TX_ENDPOINT 3
+#define ACM_RX_ENDPOINT 2
+#define GSERIAL_TX_ENDPOINT 2
+#define GSERIAL_RX_ENDPOINT 1
+#define NUM_ACM_INTERFACES 2
+#define NUM_GSERIAL_INTERFACES 1
+#define CONFIG_USBD_DATA_INTERFACE_STR "Bulk Data Interface"
+#define CONFIG_USBD_CTRL_INTERFACE_STR "Control Interface"
+
+/*
* Buffers to hold input and output data
*/
#define USBTTY_BUFFER_SIZE 256
@@ -50,157 +75,336 @@
* Instance variables
*/
static device_t usbttydev;
-static struct usb_device_instance device_instance[1];
-static struct usb_bus_instance bus_instance[1];
+static struct usb_device_instance device_instance[1];
+static struct usb_bus_instance bus_instance[1];
static struct usb_configuration_instance config_instance[NUM_CONFIGS];
-static struct usb_interface_instance interface_instance[NUM_INTERFACES];
-static struct usb_alternate_instance alternate_instance[NUM_INTERFACES];
-static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1]; /* one extra for control endpoint */
-
-/*
- * Static allocation of urbs
- */
-#define RECV_ENDPOINT 1
-#define TX_ENDPOINT 2
+static struct usb_interface_instance interface_instance[MAX_INTERFACES];
+static struct usb_alternate_instance alternate_instance[MAX_INTERFACES];
+/* one extra for control endpoint */
+static struct usb_endpoint_instance endpoint_instance[NUM_ENDPOINTS+1];
/*
* Global flag
*/
int usbtty_configured_flag = 0;
-
/*
* Serial number
*/
static char serial_number[16];
+
/*
- * Descriptors
+ * Descriptors, Strings, Local variables.
*/
+
+/* defined and used by usbdcore_ep0.c */
+extern struct usb_string_descriptor **usb_strings;
+
+/* Indicies, References */
+static unsigned short rx_endpoint = 0;
+static unsigned short tx_endpoint = 0;
+static unsigned short interface_count = 0;
+static struct usb_string_descriptor *usbtty_string_table[STR_COUNT];
+
+/* USB Descriptor Strings */
static u8 wstrLang[4] = {4,USB_DT_STRING,0x9,0x4};
static u8 wstrManufacturer[2 + 2*(sizeof(CONFIG_USBD_MANUFACTURER)-1)];
static u8 wstrProduct[2 + 2*(sizeof(CONFIG_USBD_PRODUCT_NAME)-1)];
static u8 wstrSerial[2 + 2*(sizeof(serial_number) - 1)];
static u8 wstrConfiguration[2 + 2*(sizeof(CONFIG_USBD_CONFIGURATION_STR)-1)];
-static u8 wstrInterface[2 + 2*(sizeof(CONFIG_USBD_INTERFACE_STR)-1)];
+static u8 wstrDataInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
+static u8 wstrCtrlInterface[2 + 2*(sizeof(CONFIG_USBD_DATA_INTERFACE_STR)-1)];
-static struct usb_string_descriptor *usbtty_string_table[] = {
- (struct usb_string_descriptor*)wstrLang,
- (struct usb_string_descriptor*)wstrManufacturer,
- (struct usb_string_descriptor*)wstrProduct,
- (struct usb_string_descriptor*)wstrSerial,
- (struct usb_string_descriptor*)wstrConfiguration,
- (struct usb_string_descriptor*)wstrInterface
-};
-extern struct usb_string_descriptor **usb_strings; /* defined and used by omap1510_ep0.c */
-
+/* Standard USB Data Structures */
+static struct usb_interface_descriptor interface_descriptors[MAX_INTERFACES];
+static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS];
+static struct usb_configuration_descriptor *configuration_descriptor = 0;
static struct usb_device_descriptor device_descriptor = {
- bLength: sizeof(struct usb_device_descriptor),
- bDescriptorType: USB_DT_DEVICE,
- bcdUSB: USB_BCD_VERSION,
- bDeviceClass: USBTTY_DEVICE_CLASS,
- bDeviceSubClass: USBTTY_DEVICE_SUBCLASS,
- bDeviceProtocol: USBTTY_DEVICE_PROTOCOL,
- bMaxPacketSize0: EP0_MAX_PACKET_SIZE,
- idVendor: CONFIG_USBD_VENDORID,
- idProduct: CONFIG_USBD_PRODUCTID,
- bcdDevice: USBTTY_BCD_DEVICE,
- iManufacturer: STR_MANUFACTURER,
- iProduct: STR_PRODUCT,
- iSerialNumber: STR_SERIAL,
- bNumConfigurations: NUM_CONFIGS
- };
-static struct usb_configuration_descriptor config_descriptors[NUM_CONFIGS] = {
- {
- bLength: sizeof(struct usb_configuration_descriptor),
- bDescriptorType: USB_DT_CONFIG,
- wTotalLength: (sizeof(struct usb_configuration_descriptor)*NUM_CONFIGS) +
- (sizeof(struct usb_interface_descriptor)*NUM_INTERFACES) +
- (sizeof(struct usb_endpoint_descriptor)*NUM_ENDPOINTS),
- bNumInterfaces: NUM_INTERFACES,
- bConfigurationValue: 1,
- iConfiguration: STR_CONFIG,
- bmAttributes: BMATTRIBUTE_SELF_POWERED | BMATTRIBUTE_RESERVED,
- bMaxPower: USBTTY_MAXPOWER
- },
+ .bLength = sizeof(struct usb_device_descriptor),
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = cpu_to_le16(USB_BCD_VERSION),
+ .bDeviceSubClass = 0x00,
+ .bDeviceProtocol = 0x00,
+ .bMaxPacketSize0 = EP0_MAX_PACKET_SIZE,
+ .idVendor = cpu_to_le16(CONFIG_USBD_VENDORID),
+ .bcdDevice = cpu_to_le16(USBTTY_BCD_DEVICE),
+ .iManufacturer = STR_MANUFACTURER,
+ .iProduct = STR_PRODUCT,
+ .iSerialNumber = STR_SERIAL,
+ .bNumConfigurations = NUM_CONFIGS
};
-static struct usb_interface_descriptor interface_descriptors[NUM_INTERFACES] = {
- {
- bLength: sizeof(struct usb_interface_descriptor),
- bDescriptorType: USB_DT_INTERFACE,
- bInterfaceNumber: 0,
- bAlternateSetting: 0,
- bNumEndpoints: NUM_ENDPOINTS,
- bInterfaceClass: USBTTY_INTERFACE_CLASS,
- bInterfaceSubClass: USBTTY_INTERFACE_SUBCLASS,
- bInterfaceProtocol: USBTTY_INTERFACE_PROTOCOL,
- iInterface: STR_INTERFACE
- },
+
+
+/*
+ * Static CDC ACM specific descriptors
+ */
+
+struct acm_config_desc {
+ struct usb_configuration_descriptor configuration_desc;
+
+ /* Master Interface */
+ struct usb_interface_descriptor interface_desc;
+
+ struct usb_class_header_function_descriptor usb_class_header;
+ struct usb_class_call_management_descriptor usb_class_call_mgt;
+ struct usb_class_abstract_control_descriptor usb_class_acm;
+ struct usb_class_union_function_descriptor usb_class_union;
+ struct usb_endpoint_descriptor notification_endpoint;
+
+ /* Slave Interface */
+ struct usb_interface_descriptor data_class_interface;
+ struct usb_endpoint_descriptor
+ data_endpoints[NUM_ENDPOINTS-1] __attribute__((packed));
+} __attribute__((packed));
+
+static struct acm_config_desc acm_configuration_descriptors[NUM_CONFIGS] = {
+ {
+ .configuration_desc ={
+ .bLength =
+ sizeof(struct usb_configuration_descriptor),
+ .bDescriptorType = USB_DT_CONFIG,
+ .wTotalLength =
+ cpu_to_le16(sizeof(struct acm_config_desc)),
+ .bNumInterfaces = NUM_ACM_INTERFACES,
+ .bConfigurationValue = 1,
+ .iConfiguration = STR_CONFIG,
+ .bmAttributes =
+ BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
+ .bMaxPower = USBTTY_MAXPOWER
+ },
+ /* Interface 1 */
+ .interface_desc = {
+ .bLength = sizeof(struct usb_interface_descriptor),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 0x01,
+ .bInterfaceClass =
+ COMMUNICATIONS_INTERFACE_CLASS_CONTROL,
+ .bInterfaceSubClass = COMMUNICATIONS_ACM_SUBCLASS,
+ .bInterfaceProtocol = COMMUNICATIONS_V25TER_PROTOCOL,
+ .iInterface = STR_CTRL_INTERFACE,
+ },
+ .usb_class_header = {
+ .bFunctionLength =
+ sizeof(struct usb_class_header_function_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_HEADER,
+ .bcdCDC = cpu_to_le16(110),
+ },
+ .usb_class_call_mgt = {
+ .bFunctionLength =
+ sizeof(struct usb_class_call_management_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_CMF,
+ .bmCapabilities = 0x00,
+ .bDataInterface = 0x01,
+ },
+ .usb_class_acm = {
+ .bFunctionLength =
+ sizeof(struct usb_class_abstract_control_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_ACMF,
+ .bmCapabilities = 0x00,
+ },
+ .usb_class_union = {
+ .bFunctionLength =
+ sizeof(struct usb_class_union_function_descriptor),
+ .bDescriptorType = CS_INTERFACE,
+ .bDescriptorSubtype = USB_ST_UF,
+ .bMasterInterface = 0x00,
+ .bSlaveInterface0 = 0x01,
+ },
+ .notification_endpoint = {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x01 | USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize
+ = cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+
+ /* Interface 2 */
+ .data_class_interface = {
+ .bLength =
+ sizeof(struct usb_interface_descriptor),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0x01,
+ .bAlternateSetting = 0x00,
+ .bNumEndpoints = 0x02,
+ .bInterfaceClass =
+ COMMUNICATIONS_INTERFACE_CLASS_DATA,
+ .bInterfaceSubClass = DATA_INTERFACE_SUBCLASS_NONE,
+ .bInterfaceProtocol = DATA_INTERFACE_PROTOCOL_NONE,
+ .iInterface = STR_DATA_INTERFACE,
+ },
+ .data_endpoints = {
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x02 | USB_DIR_OUT,
+ .bmAttributes =
+ USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x03 | USB_DIR_IN,
+ .bmAttributes =
+ USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_BULK_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ },
+ },
};
-static struct usb_endpoint_descriptor ep_descriptors[NUM_ENDPOINTS] = {
- {
- bLength: sizeof(struct usb_endpoint_descriptor),
- bDescriptorType: USB_DT_ENDPOINT,
- bEndpointAddress: CONFIG_USBD_SERIAL_OUT_ENDPOINT | USB_DIR_OUT,
- bmAttributes: USB_ENDPOINT_XFER_BULK,
- wMaxPacketSize: CONFIG_USBD_SERIAL_OUT_PKTSIZE,
- bInterval: 0
- },
- {
- bLength: sizeof(struct usb_endpoint_descriptor),
- bDescriptorType: USB_DT_ENDPOINT,
- bEndpointAddress: CONFIG_USBD_SERIAL_IN_ENDPOINT | USB_DIR_IN,
- bmAttributes: USB_ENDPOINT_XFER_BULK,
- wMaxPacketSize: CONFIG_USBD_SERIAL_IN_PKTSIZE,
- bInterval: 0
- },
- {
- bLength: sizeof(struct usb_endpoint_descriptor),
- bDescriptorType: USB_DT_ENDPOINT,
- bEndpointAddress: CONFIG_USBD_SERIAL_INT_ENDPOINT | USB_DIR_IN,
- bmAttributes: USB_ENDPOINT_XFER_INT,
- wMaxPacketSize: CONFIG_USBD_SERIAL_INT_PKTSIZE,
- bInterval: 0
- },
+
+static struct rs232_emu rs232_desc={
+ .dter = 115200,
+ .stop_bits = 0x00,
+ .parity = 0x00,
+ .data_bits = 0x08
};
-static struct usb_endpoint_descriptor *ep_descriptor_ptrs[NUM_ENDPOINTS] = {
- &(ep_descriptors[0]),
- &(ep_descriptors[1]),
- &(ep_descriptors[2]),
+
+
+/*
+ * Static Generic Serial specific data
+ */
+
+
+struct gserial_config_desc {
+
+ struct usb_configuration_descriptor configuration_desc;
+ struct usb_interface_descriptor
+ interface_desc[NUM_GSERIAL_INTERFACES] __attribute__((packed));
+ struct usb_endpoint_descriptor
+ data_endpoints[NUM_ENDPOINTS] __attribute__((packed));
+
+} __attribute__((packed));
+
+static struct gserial_config_desc
+gserial_configuration_descriptors[NUM_CONFIGS] ={
+ {
+ .configuration_desc ={
+ .bLength = sizeof(struct usb_configuration_descriptor),
+ .bDescriptorType = USB_DT_CONFIG,
+ .wTotalLength =
+ cpu_to_le16(sizeof(struct gserial_config_desc)),
+ .bNumInterfaces = NUM_GSERIAL_INTERFACES,
+ .bConfigurationValue = 1,
+ .iConfiguration = STR_CONFIG,
+ .bmAttributes =
+ BMATTRIBUTE_SELF_POWERED|BMATTRIBUTE_RESERVED,
+ .bMaxPower = USBTTY_MAXPOWER
+ },
+ .interface_desc = {
+ {
+ .bLength =
+ sizeof(struct usb_interface_descriptor),
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = NUM_ENDPOINTS,
+ .bInterfaceClass =
+ COMMUNICATIONS_INTERFACE_CLASS_VENDOR,
+ .bInterfaceSubClass =
+ COMMUNICATIONS_NO_SUBCLASS,
+ .bInterfaceProtocol =
+ COMMUNICATIONS_NO_PROTOCOL,
+ .iInterface = STR_DATA_INTERFACE
+ },
+ },
+ .data_endpoints = {
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x01 | USB_DIR_OUT,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_OUT_PKTSIZE),
+ .bInterval= 0xFF,
+ },
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x02 | USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_BULK,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_IN_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ {
+ .bLength =
+ sizeof(struct usb_endpoint_descriptor),
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 0x03 | USB_DIR_IN,
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize =
+ cpu_to_le16(CONFIG_USBD_SERIAL_INT_PKTSIZE),
+ .bInterval = 0xFF,
+ },
+ },
+ },
};
+/*
+ * Static Function Prototypes
+ */
+
+static void usbtty_init_strings (void);
+static void usbtty_init_instances (void);
+static void usbtty_init_endpoints (void);
+static void usbtty_init_terminal_type(short type);
+static void usbtty_event_handler (struct usb_device_instance *device,
+ usb_device_event_t event, int data);
+static int usbtty_cdc_setup(struct usb_device_request *request,
+ struct urb *urb);
+static int usbtty_configured (void);
+static int write_buffer (circbuf_t * buf);
+static int fill_buffer (circbuf_t * buf);
+
+void usbtty_poll (void);
+
/* utility function for converting char* to wide string used by USB */
static void str2wide (char *str, u16 * wide)
{
int i;
-
- for (i = 0; i < strlen (str) && str[i]; i++)
- wide[i] = (u16) str[i];
+ for (i = 0; i < strlen (str) && str[i]; i++){
+ #if defined(__LITTLE_ENDIAN__)
+ wide[i] = (u16) str[i];
+ #elif defined(__BIG_ENDIAN__)
+ wide[i] = ((u16)(str[i])<<8);
+ #else
+ #error "__LITTLE_ENDIAN__ or __BIG_ENDIAN__ undefined"
+ #endif
+ }
}
/*
- * Prototypes
- */
-static void usbtty_init_strings (void);
-static void usbtty_init_instances (void);
-static void usbtty_init_endpoints (void);
-
-static void usbtty_event_handler (struct usb_device_instance *device,
- usb_device_event_t event, int data);
-static int usbtty_configured (void);
-
-static int write_buffer (circbuf_t * buf);
-static int fill_buffer (circbuf_t * buf);
-
-void usbtty_poll (void);
-static void pretend_interrupts (void);
-
-
-/*
* Test whether a character is in the RX buffer
*/
+
int usbtty_tstc (void)
{
+ struct usb_endpoint_instance *endpoint =
+ &endpoint_instance[rx_endpoint];
+
+ /* If no input data exists, allow more RX to be accepted */
+ if(usbtty_input.size <= 0){
+ udc_unset_nak(endpoint->endpoint_address&0x03);
+ }
+
usbtty_poll ();
return (usbtty_input.size > 0);
}
@@ -210,15 +414,21 @@
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
+
int usbtty_getc (void)
{
char c;
+ struct usb_endpoint_instance *endpoint =
+ &endpoint_instance[rx_endpoint];
while (usbtty_input.size <= 0) {
+ udc_unset_nak(endpoint->endpoint_address&0x03);
usbtty_poll ();
}
buf_pop (&usbtty_input, &c, 1);
+ udc_set_nak(endpoint->endpoint_address&0x03);
+
return c;
}
@@ -238,7 +448,6 @@
}
}
-
/* usbtty_puts() helper function for finding the next '\n' in a string */
static int next_nl_pos (const char *s)
{
@@ -252,8 +461,9 @@
}
/*
- * Output a string to the usb client port.
+ * Output a string to the usb client port - implementing flow control
*/
+
static void __usbtty_puts (const char *str, int len)
{
int maxlen = usbtty_output.totalsize;
@@ -261,22 +471,19 @@
/* break str into chunks < buffer size, if needed */
while (len > 0) {
+ usbtty_poll ();
+
space = maxlen - usbtty_output.size;
-
/* Empty buffer here, if needed, to ensure space... */
- if (space <= 0) {
+ if (space) {
write_buffer (&usbtty_output);
- space = maxlen - usbtty_output.size;
- if (space <= 0) {
- space = len; /* allow old data to be overwritten. */
- }
+
+ n = MIN (space, MIN (len, maxlen));
+ buf_push (&usbtty_output, str, n);
+
+ str += n;
+ len -= n;
}
-
- n = MIN (space, MIN (len, maxlen));
- buf_push (&usbtty_output, str, n);
-
- str += n;
- len -= n;
}
}
@@ -313,8 +520,10 @@
{
int rc;
char * sn;
+ char * tt;
int snlen;
+ /* Ger seiral number */
if (!(sn = getenv("serial#"))) {
sn = "000000000000";
}
@@ -327,6 +536,14 @@
memcpy (serial_number, sn, snlen);
serial_number[snlen] = '\0';
+ /* Decide on which type of UDC device to be.
+ */
+
+ if(!(tt = getenv("usbtty"))) {
+ tt = "generic";
+ }
+ usbtty_init_terminal_type(strcmp(tt,"cdc_acm"));
+
/* prepare buffers... */
buf_init (&usbtty_input, USBTTY_BUFFER_SIZE);
buf_init (&usbtty_output, USBTTY_BUFFER_SIZE);
@@ -337,7 +554,7 @@
usbtty_init_strings ();
usbtty_init_instances ();
- udc_startup_events (device_instance); /* Enable our device, initialize udc pointers */
+ udc_startup_events (device_instance);/* Enable dev, init udc pointers */
udc_connect (); /* Enable pullup for host detection */
usbtty_init_endpoints ();
@@ -362,30 +579,48 @@
{
struct usb_string_descriptor *string;
+ usbtty_string_table[STR_LANG] =
+ (struct usb_string_descriptor*)wstrLang;
+
string = (struct usb_string_descriptor *) wstrManufacturer;
- string->bLength = sizeof (wstrManufacturer);
+ string->bLength = sizeof(wstrManufacturer);
string->bDescriptorType = USB_DT_STRING;
str2wide (CONFIG_USBD_MANUFACTURER, string->wData);
+ usbtty_string_table[STR_MANUFACTURER]=string;
+
string = (struct usb_string_descriptor *) wstrProduct;
- string->bLength = sizeof (wstrProduct);
+ string->bLength = sizeof(wstrProduct);
string->bDescriptorType = USB_DT_STRING;
str2wide (CONFIG_USBD_PRODUCT_NAME, string->wData);
+ usbtty_string_table[STR_PRODUCT]=string;
+
string = (struct usb_string_descriptor *) wstrSerial;
- string->bLength = 2 + 2*strlen(serial_number);
+ string->bLength = sizeof(serial_number);
string->bDescriptorType = USB_DT_STRING;
str2wide (serial_number, string->wData);
+ usbtty_string_table[STR_SERIAL]=string;
+
string = (struct usb_string_descriptor *) wstrConfiguration;
- string->bLength = sizeof (wstrConfiguration);
+ string->bLength = sizeof(wstrConfiguration);
string->bDescriptorType = USB_DT_STRING;
str2wide (CONFIG_USBD_CONFIGURATION_STR, string->wData);
+ usbtty_string_table[STR_CONFIG]=string;
- string = (struct usb_string_descriptor *) wstrInterface;
- string->bLength = sizeof (wstrInterface);
+
+ string = (struct usb_string_descriptor *) wstrDataInterface;
+ string->bLength = sizeof(wstrDataInterface);
string->bDescriptorType = USB_DT_STRING;
- str2wide (CONFIG_USBD_INTERFACE_STR, string->wData);
+ str2wide (CONFIG_USBD_DATA_INTERFACE_STR, string->wData);
+ usbtty_string_table[STR_DATA_INTERFACE]=string;
+
+ string = (struct usb_string_descriptor *) wstrCtrlInterface;
+ string->bLength = sizeof(wstrCtrlInterface);
+ string->bDescriptorType = USB_DT_STRING;
+ str2wide (CONFIG_USBD_CTRL_INTERFACE_STR, string->wData);
+ usbtty_string_table[STR_CTRL_INTERFACE]=string;
/* Now, initialize the string table for ep0 handling */
usb_strings = usbtty_string_table;
@@ -400,6 +635,7 @@
device_instance->device_state = STATE_INIT;
device_instance->device_descriptor = &device_descriptor;
device_instance->event = usbtty_event_handler;
+ device_instance->cdc_recv_setup = usbtty_cdc_setup;
device_instance->bus = bus_instance;
device_instance->configurations = NUM_CONFIGS;
device_instance->configuration_instance_array = config_instance;
@@ -415,8 +651,8 @@
/* configuration instance */
memset (config_instance, 0,
sizeof (struct usb_configuration_instance));
- config_instance->interfaces = NUM_INTERFACES;
- config_instance->configuration_descriptor = config_descriptors;
+ config_instance->interfaces = interface_count;
+ config_instance->configuration_descriptor = configuration_descriptor;
config_instance->interface_instance_array = interface_instance;
/* interface instance */
@@ -447,17 +683,22 @@
sizeof (struct usb_endpoint_instance));
endpoint_instance[i].endpoint_address =
- ep_descriptors[i - 1].bEndpointAddress;
+ ep_descriptor_ptrs[i - 1]->bEndpointAddress;
+
+ endpoint_instance[i].rcv_attributes =
+ ep_descriptor_ptrs[i - 1]->bmAttributes;
endpoint_instance[i].rcv_packetSize =
- ep_descriptors[i - 1].wMaxPacketSize;
- endpoint_instance[i].rcv_attributes =
- ep_descriptors[i - 1].bmAttributes;
+ le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
+
+ endpoint_instance[i].tx_attributes =
+ ep_descriptor_ptrs[i - 1]->bmAttributes;
endpoint_instance[i].tx_packetSize =
- ep_descriptors[i - 1].wMaxPacketSize;
+ le16_to_cpu(ep_descriptor_ptrs[i - 1]->wMaxPacketSize);
+
endpoint_instance[i].tx_attributes =
- ep_descriptors[i - 1].bmAttributes;
+ ep_descriptor_ptrs[i - 1]->bmAttributes;
urb_link_init (&endpoint_instance[i].rcv);
urb_link_init (&endpoint_instance[i].rdy);
@@ -480,13 +721,79 @@
int i;
bus_instance->max_endpoints = NUM_ENDPOINTS + 1;
- for (i = 0; i <= NUM_ENDPOINTS; i++) {
+ for (i = 1; i <= NUM_ENDPOINTS; i++) {
udc_setup_ep (device_instance, i, &endpoint_instance[i]);
}
}
+/* usbtty_init_terminal_type
+ *
+ * Do some late binding for our device type.
+ */
+static void usbtty_init_terminal_type(short type)
+{
+ switch(type){
+ /* CDC ACM */
+ case 0:
+ /* Assign endpoint descriptors */
+ ep_descriptor_ptrs[0] =
+ &acm_configuration_descriptors[0].notification_endpoint;
+ ep_descriptor_ptrs[1] =
+ &acm_configuration_descriptors[0].data_endpoints[0];
+ ep_descriptor_ptrs[2] =
+ &acm_configuration_descriptors[0].data_endpoints[1];
-/*********************************************************************************/
+ /* Enumerate Device Descriptor */
+ device_descriptor.bDeviceClass =
+ COMMUNICATIONS_DEVICE_CLASS;
+ device_descriptor.idProduct =
+ cpu_to_le16(CONFIG_USBD_PRODUCTID_CDCACM);
+
+ /* Assign endpoint indices */
+ tx_endpoint = ACM_TX_ENDPOINT;
+ rx_endpoint = ACM_RX_ENDPOINT;
+
+ /* Configuration Descriptor */
+ configuration_descriptor =
+ (struct usb_configuration_descriptor*)
+ &acm_configuration_descriptors;
+
+ /* Interface count */
+ interface_count = NUM_ACM_INTERFACES;
+ break;
+
+ /* BULK IN/OUT & Default */
+ case 1:
+ default:
+ /* Assign endpoint descriptors */
+ ep_descriptor_ptrs[0] =
+ &gserial_configuration_descriptors[0].data_endpoints[0];
+ ep_descriptor_ptrs[1] =
+ &gserial_configuration_descriptors[0].data_endpoints[1];
+ ep_descriptor_ptrs[2] =
+ &gserial_configuration_descriptors[0].data_endpoints[2];
+
+ /* Enumerate Device Descriptor */
+ device_descriptor.bDeviceClass = 0xFF;
+ device_descriptor.idProduct =
+ cpu_to_le16(CONFIG_USBD_PRODUCTID_GSERIAL);
+
+ /* Assign endpoint indices */
+ tx_endpoint = GSERIAL_TX_ENDPOINT;
+ rx_endpoint = GSERIAL_RX_ENDPOINT;
+
+ /* Configuration Descriptor */
+ configuration_descriptor =
+ (struct usb_configuration_descriptor*)
+ &gserial_configuration_descriptors;
+
+ /* Interface count */
+ interface_count = NUM_GSERIAL_INTERFACES;
+ break;
+ }
+}
+
+/******************************************************************************/
static struct urb *next_urb (struct usb_device_instance *device,
struct usb_endpoint_instance *endpoint)
@@ -526,27 +833,39 @@
return 0;
}
- if (buf->size) {
+ struct usb_endpoint_instance *endpoint =
+ &endpoint_instance[tx_endpoint];
+ struct urb *current_urb = NULL;
- struct usb_endpoint_instance *endpoint =
- &endpoint_instance[TX_ENDPOINT];
- struct urb *current_urb = NULL;
+ current_urb = next_urb (device_instance, endpoint);
+ /* TX data still exists - send it now
+ */
+ if(endpoint->sent < current_urb->actual_length){
+ if(udc_endpoint_write (endpoint)){
+ /* Write pre-empted by RX */
+ return -1;
+ }
+ }
+
+ if (buf->size) {
char *dest;
int space_avail;
int popnum, popped;
int total = 0;
- /* Break buffer into urb sized pieces, and link each to the endpoint */
+ /* Break buffer into urb sized pieces,
+ * and link each to the endpoint
+ */
while (buf->size > 0) {
- current_urb = next_urb (device_instance, endpoint);
+
if (!current_urb) {
TTYERR ("current_urb is NULL, buf->size %d\n",
buf->size);
return total;
}
- dest = current_urb->buffer +
+ dest = (char*)current_urb->buffer +
current_urb->actual_length;
space_avail =
@@ -562,14 +881,19 @@
current_urb->actual_length += popped;
total += popped;
- /* If endpoint->last == 0, then transfers have not started on this endpoint */
+ /* If endpoint->last == 0, then transfers have
+ * not started on this endpoint
+ */
if (endpoint->last == 0) {
- udc_endpoint_write (endpoint);
+ if(udc_endpoint_write (endpoint)){
+ /* Write pre-empted by RX */
+ return -1;
+ }
}
- } /* end while */
+ }/* end while */
return total;
- } /* end if tx_urb */
+ }
return 0;
}
@@ -577,18 +901,22 @@
static int fill_buffer (circbuf_t * buf)
{
struct usb_endpoint_instance *endpoint =
- &endpoint_instance[RECV_ENDPOINT];
+ &endpoint_instance[rx_endpoint];
if (endpoint->rcv_urb && endpoint->rcv_urb->actual_length) {
- unsigned int nb = endpoint->rcv_urb->actual_length;
+ unsigned int nb = 0;
char *src = (char *) endpoint->rcv_urb->buffer;
+ unsigned int rx_avail = buf->totalsize - buf->size;
- buf_push (buf, src, nb);
- endpoint->rcv_urb->actual_length = 0;
+ if(rx_avail >= endpoint->rcv_urb->actual_length){
+ nb = endpoint->rcv_urb->actual_length;
+ buf_push (buf, src, nb);
+ endpoint->rcv_urb->actual_length = 0;
+
+ }
return nb;
}
-
return 0;
}
@@ -597,7 +925,7 @@
return usbtty_configured_flag;
}
-/*********************************************************************************/
+/******************************************************************************/
static void usbtty_event_handler (struct usb_device_instance *device,
usb_device_event_t event, int data)
@@ -619,8 +947,34 @@
}
}
-/*********************************************************************************/
+/******************************************************************************/
+int usbtty_cdc_setup(struct usb_device_request *request, struct urb *urb)
+{
+ switch (request->bRequest){
+
+ case ACM_SET_CONTROL_LINE_STATE: /* Implies DTE ready */
+ break;
+ case ACM_SEND_ENCAPSULATED_COMMAND : /* Required */
+ break;
+ case ACM_SET_LINE_ENCODING : /* DTE stop/parity bits
+ * per character */
+ break;
+ case ACM_GET_ENCAPSULATED_RESPONSE : /* request response */
+ break;
+ case ACM_GET_LINE_ENCODING : /* request DTE rate,
+ * stop/parity bits */
+ memcpy (urb->buffer , &rs232_desc, sizeof(rs232_desc));
+ urb->actual_length = sizeof(rs232_desc);
+
+ break;
+ default:
+ return 1;
+ }
+ return 0;
+}
+
+/******************************************************************************/
/*
* Since interrupt handling has not yet been implemented, we use this function
@@ -630,36 +984,29 @@
void usbtty_poll (void)
{
/* New interrupts? */
- pretend_interrupts ();
+ udc_irq();
- /* Write any output data to host buffer (do this before checking interrupts to avoid missing one) */
+ /* Write any output data to host buffer
+ * (do this before checking interrupts to avoid missing one)
+ */
if (usbtty_configured ()) {
write_buffer (&usbtty_output);
}
/* New interrupts? */
- pretend_interrupts ();
+ udc_irq();
- /* Check for new data from host.. (do this after checking interrupts to get latest data) */
+ /* Check for new data from host..
+ * (do this after checking interrupts to get latest data)
+ */
if (usbtty_configured ()) {
fill_buffer (&usbtty_input);
}
/* New interrupts? */
- pretend_interrupts ();
+ udc_irq();
+
}
-static void pretend_interrupts (void)
-{
- /* Loop while we have interrupts.
- * If we don't do this, the input chain
- * polling delay is likely to miss
- * host requests.
- */
- while (inw (UDC_IRQ_SRC) & ~UDC_SOF_Flg) {
- /* Handle any new IRQs */
- omap1510_udc_irq ();
- omap1510_udc_noniso_irq ();
- }
-}
+
#endif
diff --git a/drivers/usbtty.h b/drivers/usbtty.h
index 79c2fe5..8154e30 100644
--- a/drivers/usbtty.h
+++ b/drivers/usbtty.h
@@ -2,6 +2,9 @@
* (C) Copyright 2003
* Gerry Hamel, geh@ti.com, Texas Instruments
*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, bodonoghue@codehermit.ie, CodeHermit
+ *
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@@ -21,44 +24,47 @@
#ifndef __USB_TTY_H__
#define __USB_TTY_H__
-
#include "usbdcore.h"
+#if defined(CONFIG_PPC)
+#include "usbdcore_mpc8xx.h"
+#elif defined(CONFIG_ARM)
#include "usbdcore_omap1510.h"
+#endif
+#include <version_autogenerated.h>
-#define NUM_CONFIGS 1
-#define NUM_INTERFACES 1
-#define NUM_ENDPOINTS 3
+/* If no VendorID/ProductID is defined in config.h, pretend to be Linux
+ * DO NOT Reuse this Vendor/Product setup with protocol incompatible devices */
-#define EP0_MAX_PACKET_SIZE 64
+#define CONFIG_USBD_VENDORID 0x0525 /* Linux/NetChip */
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0xa4a6 /* gserial */
+#define CONFIG_USBD_PRODUCTID_CDCACM 0xa4a7 /* CDC ACM */
+#define CONFIG_USBD_MANUFACTURER "Das U-Boot"
+#define CONFIG_USBD_PRODUCT_NAME U_BOOT_VERSION
+
#define CONFIG_USBD_CONFIGURATION_STR "TTY via USB"
-#define CONFIG_USBD_INTERFACE_STR "Simple Serial Data Interface - Bulk Mode"
-
-#define CONFIG_USBD_SERIAL_OUT_ENDPOINT 2
-#define CONFIG_USBD_SERIAL_OUT_PKTSIZE 64
-#define CONFIG_USBD_SERIAL_IN_ENDPOINT 1
-#define CONFIG_USBD_SERIAL_IN_PKTSIZE 64
-#define CONFIG_USBD_SERIAL_INT_ENDPOINT 5
-#define CONFIG_USBD_SERIAL_INT_PKTSIZE 16
-
+#define CONFIG_USBD_SERIAL_OUT_ENDPOINT UDC_OUT_ENDPOINT
+#define CONFIG_USBD_SERIAL_OUT_PKTSIZE UDC_OUT_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_IN_ENDPOINT UDC_IN_ENDPOINT
+#define CONFIG_USBD_SERIAL_IN_PKTSIZE UDC_IN_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_INT_ENDPOINT UDC_INT_ENDPOINT
+#define CONFIG_USBD_SERIAL_INT_PKTSIZE UDC_INT_PACKET_SIZE
+#define CONFIG_USBD_SERIAL_BULK_PKTSIZE UDC_BULK_PACKET_SIZE
#define USBTTY_DEVICE_CLASS COMMUNICATIONS_DEVICE_CLASS
-#define USBTTY_DEVICE_SUBCLASS COMMUNICATIONS_NO_SUBCLASS
-#define USBTTY_DEVICE_PROTOCOL COMMUNICATIONS_NO_PROTOCOL
-#define USBTTY_INTERFACE_CLASS 0xFF /* Vendor Specific */
-#define USBTTY_INTERFACE_SUBCLASS 0x02
-#define USBTTY_INTERFACE_PROTOCOL 0x01
+#define USBTTY_BCD_DEVICE 0x00
+#define USBTTY_MAXPOWER 0x00
-#define USBTTY_BCD_DEVICE 0x0
-#define USBTTY_MAXPOWER 0x0
-
-#define STR_MANUFACTURER 1
-#define STR_PRODUCT 2
-#define STR_SERIAL 3
-#define STR_CONFIG 4
-#define STR_INTERFACE 5
+#define STR_LANG 0x00
+#define STR_MANUFACTURER 0x01
+#define STR_PRODUCT 0x02
+#define STR_SERIAL 0x03
+#define STR_CONFIG 0x04
+#define STR_DATA_INTERFACE 0x05
+#define STR_CTRL_INTERFACE 0x06
+#define STR_COUNT 0x07
#endif
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index ebda719..e8cb299 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -592,9 +592,11 @@
#define PMC_REG_BASE __REG(0x40500400) /* Primary Modem Codec */
#define SMC_REG_BASE __REG(0x40500500) /* Secondary Modem Codec */
+
/*
* USB Device Controller
*/
+#ifndef CONFIG_CPU_MONAHANS
#define UDC_RES1 __REG(0x40600004) /* UDC Undocumented - Reserved1 */
#define UDC_RES2 __REG(0x40600008) /* UDC Undocumented - Reserved2 */
#define UDC_RES3 __REG(0x4060000C) /* UDC Undocumented - Reserved3 */
@@ -749,11 +751,28 @@
#define USIR1_IR13 (1 << 5) /* Interrup request ep 13 */
#define USIR1_IR14 (1 << 6) /* Interrup request ep 14 */
#define USIR1_IR15 (1 << 7) /* Interrup request ep 15 */
+#endif /* ! CONFIG_CPU_MONAHANS */
-#if defined(CONFIG_PXA27X)
+#if defined(CONFIG_PXA27X) || defined(CONFIG_CPU_MONAHANS)
+
+/*
+ * USB Client Controller (incomplete)
+ */
+#define UDCCR __REG(0x40600000)
+#define UDCICR0 __REG(0x40600004)
+#define UDCCIR0 __REG(0x40600008)
+#define UDCISR0 __REG(0x4060000c)
+#define UDCSIR1 __REG(0x40600010)
+#define UDCFNR __REG(0x40600014)
+#define UDCOTGICR __REG(0x40600018)
+#define UDCOTGISR __REG(0x4060001c)
+#define UP2OCR __REG(0x40600020)
+#define UP3OCR __REG(0x40600024)
+
/*
* USB Host Controller
*/
+#define OHCI_REGS_BASE 0x4C000000 /* required for ohci driver */
#define UHCREV __REG(0x4C000000)
#define UHCHCON __REG(0x4C000004)
#define UHCCOMS __REG(0x4C000008)
diff --git a/include/configs/AdderUSB.h b/include/configs/AdderUSB.h
new file mode 100644
index 0000000..a4f7f9a
--- /dev/null
+++ b/include/configs/AdderUSB.h
@@ -0,0 +1,51 @@
+/*
+ * Copyright (C) 2006 CodeHermit.
+ * Bryan O'Donoghue <bodonoghue@codehermit.ie>
+ *
+ * Provides support for USB console on the Analogue & Micro Adder87x
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __ADDERUSB__
+#define __ADDERUSB__
+
+/* Include the board port */
+#include "Adder.h"
+
+#define CONFIG_USB_DEVICE /* Include UDC driver */
+#define CONFIG_USB_TTY /* Bind the TTY driver to UDC */
+#define CFG_USB_EXTC_CLK 0x02 /* Oscillator on EXTC_CLK 2 */
+#define CFG_USB_BRG_CLK 0x04 /* or use Baud rate generator 0x04 */
+#define CFG_CONSOLE_IS_IN_ENV /* Console is in env */
+
+/* If you have a USB-IF assigned VendorID then you may wish to define
+ * your own vendor specific values either in BoardName.h or directly in
+ * usbd_vendor_info.h
+ */
+
+/*
+#define CONFIG_USBD_MANUFACTURER "CodeHermit.ie"
+#define CONFIG_USBD_PRODUCT_NAME "Das U-Boot"
+#define CONFIG_USBD_VENDORID 0xFFFF
+#define CONFIG_USBD_PRODUCTID_GSERIAL 0xFFFF
+#define CONFIG_USBD_PRODUCTID_CDCACM 0xFFFE
+*/
+
+#endif /* __ADDERUSB_H__ */
diff --git a/include/configs/delta.h b/include/configs/delta.h
index 91284fd..fea821a 100644
--- a/include/configs/delta.h
+++ b/include/configs/delta.h
@@ -94,12 +94,25 @@
# define CONFIG_COMMANDS ((CONFIG_CMD_DFL \
| CFG_CMD_ENV \
| CFG_CMD_NAND \
- | CFG_CMD_I2C) \
+ | CFG_CMD_I2C \
+ | CFG_CMD_USB \
+ | CFG_CMD_FAT) \
& ~(CFG_CMD_NET \
| CFG_CMD_FLASH \
| CFG_CMD_IMLS))
#endif
+/* USB */
+#define CONFIG_USB_OHCI 1
+#define CONFIG_USB_STORAGE 1
+#define CONFIG_DOS_PARTITION 1
+
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE OHCI_REGS_BASE
+#define CFG_USB_OHCI_SLOT_NAME "delta"
+
+#define LITTLEENDIAN 1 /* used by usb_ohci.c */
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <cmd_confdefs.h>
diff --git a/include/configs/mp2usb.h b/include/configs/mp2usb.h
index 04f1f24..edb20f8 100644
--- a/include/configs/mp2usb.h
+++ b/include/configs/mp2usb.h
@@ -107,6 +107,11 @@
#define CONFIG_DOS_PARTITION 1
#define CONFIG_AT91C_PQFP_UHPBUG 1
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE AT91_USB_HOST_BASE
+#define CFG_USB_OHCI_SLOT_NAME "at91rm9200"
+
#undef CONFIG_HARD_I2C
#ifdef CONFIG_HARD_I2C
@@ -127,7 +132,7 @@
#define CONFIG_COMMANDS \
((CONFIG_CMD_DFL | \
CFG_CMD_DATE | \
- CFG_CMD_DHCP | \
+ CFG_CMD_DHCP | \
CFG_CMD_EEPROM | \
CFG_CMD_I2C | \
CFG_CMD_NFS | \
@@ -136,7 +141,7 @@
#else
#define CONFIG_COMMANDS \
((CONFIG_CMD_DFL | \
- CFG_CMD_DHCP | \
+ CFG_CMD_DHCP | \
CFG_CMD_NFS | \
CFG_CMD_SNTP | \
CFG_CMD_USB | \
@@ -156,7 +161,7 @@
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM 0x20000000
-#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
+#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
#define CFG_MEMTEST_START PHYS_SDRAM
#define CFG_MEMTEST_END CFG_MEMTEST_START + PHYS_SDRAM_SIZE - 262144
diff --git a/include/configs/trab.h b/include/configs/trab.h
index a2dc8e7..ae97947 100644
--- a/include/configs/trab.h
+++ b/include/configs/trab.h
@@ -84,6 +84,11 @@
#define CONFIG_USB_STORAGE 1
#define CONFIG_DOS_PARTITION 1
+#undef CFG_USB_OHCI_BOARD_INIT
+#define CFG_USB_OHCI_CPU_INIT 1
+#define CFG_USB_OHCI_REGS_BASE S3C24X0_USB_HOST_BASE
+#define CFG_USB_OHCI_SLOT_NAME "s3c2400"
+
/*
* Size of malloc() pool
*/
diff --git a/include/da9030.h b/include/da9030.h
index 41108b9..3e3b202 100644
--- a/include/da9030.h
+++ b/include/da9030.h
@@ -104,3 +104,15 @@
#define SYS_CONTROL_A_HWRES_ENABLE (1<<2)
#define SYS_CONTROL_A_WDOG_ACTION (1<<3)
#define SYS_CONTROL_A_WATCHDOG (1<<7)
+
+#define MISC_CONTROLB_USB_INT_RISING (1<<2)
+#define MISC_CONTROLB_SESSION_VALID_EN (1<<3)
+
+#define USB_PUMP_USBVE (1<<0)
+#define USB_PUMP_USBVEP (1<<1)
+#define USB_PUMP_SRP_DETECT (1<<2)
+#define USB_PUMP_SESSION_VALID (1<<3)
+#define USB_PUMP_VBUS_VALID_4_0 (1<<4)
+#define USB_PUMP_VBUS_VALID_4_4 (1<<5)
+#define USB_PUMP_EN_USBVE (1<<6)
+#define USB_PUMP_EN_USBVEP (1<<7)
diff --git a/include/usb_cdc_acm.h b/include/usb_cdc_acm.h
new file mode 100644
index 0000000..87bf50c
--- /dev/null
+++ b/include/usb_cdc_acm.h
@@ -0,0 +1,43 @@
+/*
+ * (C) Copyright 2006
+ * Bryan O'Donoghue, deckard@codehermit.ie, CodeHermit
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/* ACM Control Requests */
+#define ACM_SEND_ENCAPSULATED_COMMAND 0x00
+#define ACM_GET_ENCAPSULATED_RESPONSE 0x01
+#define ACM_SET_COMM_FEATURE 0x02
+#define ACM_GET_COMM_FEATRUE 0x03
+#define ACM_CLEAR_COMM_FEATURE 0x04
+#define ACM_SET_LINE_ENCODING 0x20
+#define ACM_GET_LINE_ENCODING 0x21
+#define ACM_SET_CONTROL_LINE_STATE 0x22
+#define ACM_SEND_BREAK 0x23
+
+/* ACM Notification Codes */
+#define ACM_NETWORK_CONNECTION 0x00
+#define ACM_RESPONSE_AVAILABLE 0x01
+#define ACM_SERIAL_STATE 0x20
+
+/* Format of response expected by a ACM_GET_LINE_ENCODING request */
+struct rs232_emu{
+ unsigned long dter;
+ unsigned char stop_bits;
+ unsigned char parity;
+ unsigned char data_bits;
+}__attribute__((packed));
diff --git a/include/usbdcore.h b/include/usbdcore.h
index 6e92df1..cb2be72 100644
--- a/include/usbdcore.h
+++ b/include/usbdcore.h
@@ -576,6 +576,9 @@
void (*event) (struct usb_device_instance *device, usb_device_event_t event, int data);
+ /* Do cdc device specific control requests */
+ int (*cdc_recv_setup)(struct usb_device_request *request, struct urb *urb);
+
/* bus interface */
struct usb_bus_instance *bus; /* which bus interface driver */
diff --git a/include/usbdcore_mpc8xx.h b/include/usbdcore_mpc8xx.h
new file mode 100644
index 0000000..9df62f4
--- /dev/null
+++ b/include/usbdcore_mpc8xx.h
@@ -0,0 +1,210 @@
+/*
+ * Copyright (C) 2006 Bryan O'Donoghue, CodeHermit
+ * bodonoghue@codehermit.ie
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the
+ * Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ */
+
+#include <commproc.h>
+
+/* Mode Register */
+#define USMOD_EN 0x01
+#define USMOD_HOST 0x02
+#define USMOD_TEST 0x04
+#define USMOD_SFTE 0x08
+#define USMOD_RESUME 0x40
+#define USMOD_LSS 0x80
+
+/* Endpoint Registers */
+#define USEP_RHS_NORM 0x00
+#define USEP_RHS_IGNORE 0x01
+#define USEP_RHS_NAK 0x02
+#define USEP_RHS_STALL 0x03
+
+#define USEP_THS_NORM 0x00
+#define USEP_THS_IGNORE 0x04
+#define USEP_THS_NAK 0x08
+#define USEP_THS_STALL 0x0C
+
+#define USEP_RTE 0x10
+#define USEP_MF 0x20
+
+#define USEP_TM_CONTROL 0x00
+#define USEP_TM_INT 0x100
+#define USEP_TM_BULK 0x200
+#define USEP_TM_ISO 0x300
+
+/* Command Register */
+#define USCOM_EP0 0x00
+#define USCOM_EP1 0x01
+#define USCOM_EP2 0x02
+#define USCOM_EP3 0x03
+
+#define USCOM_FLUSH 0x40
+#define USCOM_STR 0x80
+
+/* Event Register */
+#define USB_E_RXB 0x0001
+#define USB_E_TXB 0x0002
+#define USB_E_BSY 0x0004
+#define USB_E_SOF 0x0008
+#define USB_E_TXE1 0x0010
+#define USB_E_TXE2 0x0020
+#define USB_E_TXE3 0x0040
+#define USB_E_TXE4 0x0080
+#define USB_TX_ERRMASK (USB_E_TXE1|USB_E_TXE2|USB_E_TXE3|USB_E_TXE4)
+#define USB_E_IDLE 0x0100
+#define USB_E_RESET 0x0200
+
+/* Mask Register */
+#define USBS_IDLE 0x01
+
+/* RX Buffer Descriptor */
+#define RX_BD_OV 0x02
+#define RX_BD_CR 0x04
+#define RX_BD_AB 0x08
+#define RX_BD_NO 0x10
+#define RX_BD_PID_DATA0 0x00
+#define RX_BD_PID_DATA1 0x40
+#define RX_BD_PID_SETUP 0x80
+#define RX_BD_F 0x400
+#define RX_BD_L 0x800
+#define RX_BD_I 0x1000
+#define RX_BD_W 0x2000
+#define RX_BD_E 0x8000
+
+/* Useful masks */
+#define RX_BD_PID_BITMASK (RX_BD_PID_DATA1 | RX_BD_PID_SETUP)
+#define STALL_BITMASK (USEP_THS_STALL | USEP_RHS_STALL)
+#define NAK_BITMASK (USEP_THS_NAK | USEP_RHS_NAK)
+#define CBD_TX_BITMASK (TX_BD_R | TX_BD_L | TX_BD_TC | TX_BD_I | TX_BD_CNF)
+
+/* TX Buffer Descriptor */
+#define TX_BD_UN 0x02
+#define TX_BD_TO 0x04
+#define TX_BD_NO_PID 0x00
+#define TX_BD_PID_DATA0 0x80
+#define TX_BD_PID_DATA1 0xC0
+#define TX_BD_CNF 0x200
+#define TX_BD_TC 0x400
+#define TX_BD_L 0x800
+#define TX_BD_I 0x1000
+#define TX_BD_W 0x2000
+#define TX_BD_R 0x8000
+
+/* Implementation specific defines */
+
+#define EP_MIN_PACKET_SIZE 0x08
+#define MAX_ENDPOINTS 0x04
+#define FIFO_SIZE 0x10
+#define EP_MAX_PKT FIFO_SIZE
+#define TX_RING_SIZE 0x04
+#define RX_RING_SIZE 0x06
+#define USB_MAX_PKT 0x40
+#define TOGGLE_TX_PID(x) x= ((~x)&0x40)|0x80
+#define TOGGLE_RX_PID(x) x^= 0x40
+#define EP_ATTACHED 0x01 /* Endpoint has a urb attached or not */
+#define EP_SEND_ZLP 0x02 /* Send ZLP y/n ? */
+
+#define PROFF_USB 0x00000000
+#define CPM_USB_BASE 0x00000A00
+
+/* UDC device defines */
+#define EP0_MAX_PACKET_SIZE EP_MAX_PKT
+#define UDC_OUT_ENDPOINT 0x02
+#define UDC_OUT_PACKET_SIZE EP_MIN_PACKET_SIZE
+#define UDC_IN_ENDPOINT 0x03
+#define UDC_IN_PACKET_SIZE EP_MIN_PACKET_SIZE
+#define UDC_INT_ENDPOINT 0x01
+#define UDC_INT_PACKET_SIZE UDC_IN_PACKET_SIZE
+#define UDC_BULK_PACKET_SIZE EP_MIN_PACKET_SIZE
+
+struct mpc8xx_ep {
+ struct urb * urb;
+ unsigned char pid;
+ unsigned char sc;
+ volatile cbd_t * prx;
+};
+
+typedef struct mpc8xx_usb{
+ char usmod; /* Mode Register */
+ char usaddr; /* Slave Address Register */
+ char uscom; /* Command Register */
+ char res1; /* Reserved */
+ ushort usep[4];
+ ulong res2; /* Reserved */
+ ushort usber; /* Event Register */
+ ushort res3; /* Reserved */
+ ushort usbmr; /* Mask Register */
+ char res4; /* Reserved */
+ char usbs; /* Status Register */
+ char res5[8]; /* Reserved */
+}usb_t;
+
+typedef struct mpc8xx_parameter_ram{
+ ushort ep0ptr; /* Endpoint Pointer Register 0 */
+ ushort ep1ptr; /* Endpoint Pointer Register 1 */
+ ushort ep2ptr; /* Endpoint Pointer Register 2 */
+ ushort ep3ptr; /* Endpoint Pointer Register 3 */
+ uint rstate; /* Receive state */
+ uint rptr; /* Receive internal data pointer */
+ ushort frame_n; /* Frame number */
+ ushort rbcnt; /* Receive byte count */
+ uint rtemp; /* Receive temp cp use only */
+ uint rxusb; /* Rx Data Temp */
+ ushort rxuptr; /* Rx microcode return address temp */
+}usb_pram_t;
+
+typedef struct endpoint_parameter_block_pointer{
+ ushort rbase; /* RxBD base address */
+ ushort tbase; /* TxBD base address */
+ char rfcr; /* Rx Function code */
+ char tfcr; /* Tx Function code */
+ ushort mrblr; /* Maximum Receive Buffer Length */
+ ushort rbptr; /* RxBD pointer Next Buffer Descriptor */
+ ushort tbptr; /* TxBD pointer Next Buffer Descriptor */
+ ulong tstate; /* Transmit internal state */
+ ulong tptr; /* Transmit internal data pointer */
+ ushort tcrc; /* Transmit temp CRC */
+ ushort tbcnt; /* Transmit internal bye count */
+ ulong ttemp; /* Tx temp */
+ ushort txuptr; /* Tx microcode return address */
+ ushort res1; /* Reserved */
+}usb_epb_t;
+
+typedef enum mpc8xx_udc_state{
+ STATE_NOT_READY,
+ STATE_ERROR,
+ STATE_READY,
+}mpc8xx_udc_state_t;
+
+/* Declarations */
+int udc_init(void);
+void udc_irq(void);
+int udc_endpoint_write(struct usb_endpoint_instance *endpoint);
+void udc_setup_ep(struct usb_device_instance *device, unsigned int ep,
+ struct usb_endpoint_instance *endpoint);
+void udc_connect(void);
+void udc_disconnect(void);
+void udc_enable(struct usb_device_instance *device);
+void udc_disable(void);
+void udc_startup_events(struct usb_device_instance *device);
+
+/* Flow control */
+void udc_set_nak(int epid);
+void udc_unset_nak (int epid);
diff --git a/include/usbdcore_omap1510.h b/include/usbdcore_omap1510.h
index 6ea3331..526fcd9 100644
--- a/include/usbdcore_omap1510.h
+++ b/include/usbdcore_omap1510.h
@@ -161,10 +161,20 @@
#define UDC_VBUS_CTRL (1 << 19)
#define UDC_VBUS_MODE (1 << 18)
+/* OMAP Endpoint parameters */
+#define EP0_MAX_PACKET_SIZE 64
+#define UDC_OUT_ENDPOINT 2
+#define UDC_OUT_PACKET_SIZE 64
+#define UDC_IN_ENDPOINT 1
+#define UDC_IN_PACKET_SIZE 64
+#define UDC_INT_ENDPOINT 5
+#define UDC_INT_PKTSIZE 16
+#define UDC_BULK_PKTSIZE 16
-void omap1510_udc_irq(void);
-void omap1510_udc_noniso_irq(void);
-
+void udc_irq (void);
+/* Flow control */
+void udc_set_nak(int epid);
+void udc_unset_nak (int epid);
/* Higher level functions for abstracting away from specific device */
void udc_endpoint_write(struct usb_endpoint_instance *endpoint);
diff --git a/include/usbdescriptors.h b/include/usbdescriptors.h
index 2d9f739..a752097 100644
--- a/include/usbdescriptors.h
+++ b/include/usbdescriptors.h
@@ -92,33 +92,42 @@
#define COMMUNICATIONS_DEVICE_CLASS 0x02
/* c.f. CDC 4.2 Table 15 */
-#define COMMUNICATIONS_INTERFACE_CLASS 0x02
+#define COMMUNICATIONS_INTERFACE_CLASS_CONTROL 0x02
+#define COMMUNICATIONS_INTERFACE_CLASS_DATA 0x0A
+#define COMMUNICATIONS_INTERFACE_CLASS_VENDOR 0x0FF
/* c.f. CDC 4.3 Table 16 */
-#define COMMUNICATIONS_NO_SUBCLASS 0x00
+#define COMMUNICATIONS_NO_SUBCLASS 0x00
#define COMMUNICATIONS_DLCM_SUBCLASS 0x01
-#define COMMUNICATIONS_ACM_SUBCLASS 0x02
-#define COMMUNICATIONS_TCM_SUBCLASS 0x03
+#define COMMUNICATIONS_ACM_SUBCLASS 0x02
+#define COMMUNICATIONS_TCM_SUBCLASS 0x03
#define COMMUNICATIONS_MCCM_SUBCLASS 0x04
-#define COMMUNICATIONS_CCM_SUBCLASS 0x05
+#define COMMUNICATIONS_CCM_SUBCLASS 0x05
#define COMMUNICATIONS_ENCM_SUBCLASS 0x06
#define COMMUNICATIONS_ANCM_SUBCLASS 0x07
/* c.f. WMCD 5.1 */
#define COMMUNICATIONS_WHCM_SUBCLASS 0x08
-#define COMMUNICATIONS_DMM_SUBCLASS 0x09
+#define COMMUNICATIONS_DMM_SUBCLASS 0x09
#define COMMUNICATIONS_MDLM_SUBCLASS 0x0a
#define COMMUNICATIONS_OBEX_SUBCLASS 0x0b
-/* c.f. CDC 4.6 Table 18 */
+/* c.f. CDC 4.4 Table 17 */
+#define COMMUNICATIONS_NO_PROTOCOL 0x00
+#define COMMUNICATIONS_V25TER_PROTOCOL 0x01 /*Common AT Hayes compatible*/
+
+/* c.f. CDC 4.5 Table 18 */
#define DATA_INTERFACE_CLASS 0x0a
+/* c.f. CDC 4.6 No Table */
+#define DATA_INTERFACE_SUBCLASS_NONE 0x00 /* No subclass pertinent */
+
/* c.f. CDC 4.7 Table 19 */
-#define COMMUNICATIONS_NO_PROTOCOL 0x00
+#define DATA_INTERFACE_PROTOCOL_NONE 0x00 /* No class protcol required */
/* c.f. CDC 5.2.3 Table 24 */
-#define CS_INTERFACE 0x24
+#define CS_INTERFACE 0x24
#define CS_ENDPOINT 0x25
/*
@@ -128,7 +137,7 @@
* c.f. WMCD 5.3 Table 5.3
*/
-#define USB_ST_HEADER 0x00
+#define USB_ST_HEADER 0x00
#define USB_ST_CMF 0x01
#define USB_ST_ACMF 0x02
#define USB_ST_DLMF 0x03
@@ -137,18 +146,18 @@
#define USB_ST_UF 0x06
#define USB_ST_CSF 0x07
#define USB_ST_TOMF 0x08
-#define USB_ST_USBTF 0x09
+#define USB_ST_USBTF 0x09
#define USB_ST_NCT 0x0a
#define USB_ST_PUF 0x0b
#define USB_ST_EUF 0x0c
#define USB_ST_MCMF 0x0d
#define USB_ST_CCMF 0x0e
#define USB_ST_ENF 0x0f
-#define USB_ST_ATMNF 0x10
+#define USB_ST_ATMNF 0x10
#define USB_ST_WHCM 0x11
#define USB_ST_MDLM 0x12
-#define USB_ST_MDLMD 0x13
+#define USB_ST_MDLMD 0x13
#define USB_ST_DMM 0x14
#define USB_ST_OBEX 0x15
#define USB_ST_CS 0x16
@@ -312,7 +321,8 @@
u8 bDescriptorType;
u8 bDescriptorSubtype; /* 0x06 */
u8 bMasterInterface;
- u8 bSlaveInterface0[0];
+ /* u8 bSlaveInterface0[0]; */
+ u8 bSlaveInterface0;
} __attribute__ ((packed));
struct usb_class_country_selection_descriptor {