* Cleanup lowboot code for MPC5200
* Minor code cleanup (coding style)
* Patch by Reinhard Meyer, 30 Dec 2003:
- cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
- added CONFIG_PHY_ADDR to include/configs/IceCube.h,
- turned debug print of PHY registers into a function (called in two places)
- added support for EMK MPC5200 based modules
* Fix MPC8xx PLPRCR_MFD_SHIFT typo
* Add support for TQM866M modules
* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
* Fix a few compiler warnings
diff --git a/CHANGELOG b/CHANGELOG
index 4c0bd2b..4745c8f 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,22 @@
Changes since U-Boot 1.0.0:
======================================================================
+* Minor code cleanup (coding style)
+
+* Patch by Reinhard Meyer, 30 Dec 2003:
+ - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
+ - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
+ - turned debug print of PHY registers into a function (called in two places)
+ - added support for EMK MPC5200 based modules
+
+* Fix MPC8xx PLPRCR_MFD_SHIFT typo
+
+* Add support for TQM866M modules
+
+* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)
+
+* Fix a few compiler warnings
+
* Patch by Reinhard Meyer, 28 Dec 2003:
Add initial support for TOP5200 board
diff --git a/MAINTAINERS b/MAINTAINERS
index 29084f6..8752564 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -180,7 +180,8 @@
Reinhard Meyer <r.meyer@emk-elektronik.de>
- TOP860 MPC860
+ TOP860 MPC860T
+ TOP5200 MPC5200
Scott McNutt <smcnutt@artesyncp.com>
diff --git a/MAKEALL b/MAKEALL
index 459b54b..1472694 100644
--- a/MAKEALL
+++ b/MAKEALL
@@ -25,7 +25,7 @@
#########################################################################
LIST_5xxx=" \
- IceCube_5100 IceCube_5200 \
+ IceCube_5100 IceCube_5200 EVAL5200 \
"
#########################################################################
diff --git a/Makefile b/Makefile
index 48788af..bb62b0e 100644
--- a/Makefile
+++ b/Makefile
@@ -1,5 +1,5 @@
#
-# (C) Copyright 2000, 2001, 2002
+# (C) Copyright 2000-2004
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
# See file CREDITS for list of people who contributed to this
@@ -204,6 +204,7 @@
MPC5200LITE_config \
MPC5200LITE_LOWBOOT_config \
MPC5200LITE_LOWBOOT08_config \
+icecube_5200_DDR_LOWBOOT_config \
icecube_5200_DDR_config \
IceCube_5200_DDR_config \
icecube_5200_config \
@@ -218,20 +219,26 @@
{ echo "TEXT_BASE = 0xFF800000" >board/icecube/config.tmp ; \
echo "... with 8 MB flash only" ; \
}
- @[ -z "$(findstring 5200,$@)" ] || \
- { echo "#define CONFIG_MPC5200" >>include/config.h ; \
- echo "... with MPC5200 processor" ; \
- }
@[ -z "$(findstring DDR,$@)" ] || \
{ echo "#define CONFIG_MPC5200_DDR" >>include/config.h ; \
echo "... DDR memory revision" ; \
}
+ @[ -z "$(findstring 5200,$@)" ] || \
+ { echo "#define CONFIG_MPC5200" >>include/config.h ; \
+ echo "... with MPC5200 processor" ; \
+ }
@[ -z "$(findstring 5100,$@)" ] || \
{ echo "#define CONFIG_MGT5100" >>include/config.h ; \
echo "... with MGT5100 processor" ; \
}
@./mkconfig -a IceCube ppc mpc5xxx icecube
+MINI5200_config \
+EVAL5200_config \
+TOP5200_config: unconfig
+ @ echo "#define CONFIG_$(@:_config=) 1" >include/config.h
+ @./mkconfig -a TOP5200 ppc mpc5xxx top5200 emk
+
#########################################################################
## MPC8xx Systems
#########################################################################
@@ -438,7 +445,7 @@
# All boards can come with 50 MHz (default), 66MHz, 80MHz or 100 MHz clock,
# but only 855 and 860 boards may come with FEC
# and 823 boards may have LCD support
-xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _LCD,,$(subst _config,,$1)))))
+xtract_8xx = $(subst _66MHz,,$(subst _80MHz,,$(subst _100MHz,,$(subst _133MHz,,$(subst _LCD,,$(subst _config,,$1))))))
FPS850L_config \
FPS860L_config \
@@ -476,7 +483,12 @@
TQM862M_config \
TQM862M_66MHz_config \
TQM862M_80MHz_config \
-TQM862M_100MHz_config: unconfig
+TQM862M_100MHz_config \
+TQM866M_config \
+TQM866M_66MHz_config \
+TQM866M_80MHz_config \
+TQM866M_100MHz_config \
+TQM866M_133MHz_config: unconfig
@ >include/config.h
@[ -z "$(findstring _66MHz,$@)" ] || \
{ echo "#define CONFIG_66MHz" >>include/config.h ; \
@@ -490,6 +502,10 @@
{ echo "#define CONFIG_100MHz" >>include/config.h ; \
echo "... with 100MHz system clock" ; \
}
+ @[ -z "$(findstring _133MHz,$@)" ] || \
+ { echo "#define CONFIG_133MHz" >>include/config.h ; \
+ echo "... with 133MHz system clock" ; \
+ }
@[ -z "$(findstring _LCD,$@)" ] || \
{ echo "#define CONFIG_LCD" >>include/config.h ; \
echo "#define CONFIG_NEC_NL6448BC20" >>include/config.h ; \
diff --git a/README b/README
index e440e0b..2d1a038 100644
--- a/README
+++ b/README
@@ -490,10 +490,10 @@
default i/o. Serial console can be forced with
environment 'console=serial'.
- When CONFIG_SILENT_CONSOLE is defined, all console
- messages (by U-Boot and Linux!) can be silenced with
- the "silent" environment variable. See
- doc/README.silent for more information.
+ When CONFIG_SILENT_CONSOLE is defined, all console
+ messages (by U-Boot and Linux!) can be silenced with
+ the "silent" environment variable. See
+ doc/README.silent for more information.
- Console Baudrate:
CONFIG_BAUDRATE - in bps
@@ -1472,16 +1472,16 @@
- Interrupt support (PPC):
- There are common interrupt_init() and timer_interrupt()
- for all PPC archs. interrupt_init() calls interrupt_init_cpu()
- for cpu specific initialization. interrupt_init_cpu()
- should set decrementer_count to appropriate value. If
- cpu resets decrementer automatically after interrupt
- (ppc4xx) it should set decrementer_count to zero.
- timer_interrupt() calls timer_interrupt_cpu() for cpu
- specific handling. If board has watchdog / status_led
- / other_activity_monitor it works automatically from
- general timer_interrupt().
+ There are common interrupt_init() and timer_interrupt()
+ for all PPC archs. interrupt_init() calls interrupt_init_cpu()
+ for cpu specific initialization. interrupt_init_cpu()
+ should set decrementer_count to appropriate value. If
+ cpu resets decrementer automatically after interrupt
+ (ppc4xx) it should set decrementer_count to zero.
+ timer_interrupt() calls timer_interrupt_cpu() for cpu
+ specific handling. If board has watchdog / status_led
+ / other_activity_monitor it works automatically from
+ general timer_interrupt().
- General:
@@ -1766,7 +1766,7 @@
- CFG_ENV_IS_IN_DATAFLASH:
- Define this if you have a DataFlash memory device which you
+ Define this if you have a DataFlash memory device which you
want to use for the environment.
- CFG_ENV_OFFSET:
diff --git a/board/bubinga405ep/bubinga405ep.c b/board/bubinga405ep/bubinga405ep.c
index 8694ebe..f73b166 100644
--- a/board/bubinga405ep/bubinga405ep.c
+++ b/board/bubinga405ep/bubinga405ep.c
@@ -79,7 +79,6 @@
int checkboard (void)
{
unsigned char *s = getenv ("serial#");
- unsigned char *e;
puts ("Board: IBM 405EP Eval Board");
diff --git a/board/emk/top5200/config.mk b/board/emk/top5200/config.mk
index 14af97a..84131fe 100644
--- a/board/emk/top5200/config.mk
+++ b/board/emk/top5200/config.mk
@@ -2,6 +2,9 @@
# (C) Copyright 2003
# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
#
+# (C) Copyright 2003
+# Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
+#
# See file CREDITS for list of people who contributed to this
# project.
#
@@ -24,8 +27,15 @@
#
# TOP5200 board, on optional MINI5200 and EVAL5200 boards
#
+# allowed and functional TEXT_BASE values:
+#
+# 0xff000000 low boot at 0x00000100 (default board setting)
+# 0xfff00000 high boot at 0xfff00100 (board needs modification)
+# 0x00100000 RAM load and test
+#
-TEXT_BASE = 0xfff00000
+TEXT_BASE = 0xff000000
+#TEXT_BASE = 0xfff00000
#TEXT_BASE = 0x00100000
PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
diff --git a/board/emk/top5200/flash.c b/board/emk/top5200/flash.c
index b951b5f..216bce3 100644
--- a/board/emk/top5200/flash.c
+++ b/board/emk/top5200/flash.c
@@ -2,6 +2,9 @@
* (C) Copyright 2003
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
+ * (C) Copyright 2003
+ * Reinhard Meyer, EMK Elektronik GmbH, r.meyer@emk-elektronik.de
+ *
* See file CREDITS for list of people who contributed to this
* project.
*
@@ -51,7 +54,7 @@
unsigned long flash_init (void)
{
unsigned long size = 0;
- int i;
+ int i = 0;
extern void flash_preinit(void);
extern void flash_afterinit(uint, ulong, ulong);
ulong flashbase = CFG_FLASH_BASE;
@@ -59,10 +62,10 @@
flash_preinit();
/* There is only ONE FLASH device */
- memset(&flash_info[0], 0, sizeof(flash_info_t));
- flash_info[0].size =
- flash_get_size((FPW *)flashbase, &flash_info[0]);
- size += flash_info[0].size;
+ memset(&flash_info[i], 0, sizeof(flash_info_t));
+ flash_info[i].size =
+ flash_get_size((FPW *)flashbase, &flash_info[i]);
+ size += flash_info[i].size;
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
/* monitor protection ON by default */
@@ -81,7 +84,7 @@
#endif
- flash_afterinit(0, flash_info[0].start[0], flash_info[0].size);
+ flash_afterinit(i, flash_info[i].start[0], flash_info[i].size);
return size ? size : 1;
}
@@ -151,7 +154,8 @@
if (info->flash_id & FLASH_BTYPE) {
boottype = botboottype;
bootletter = botbootletter;
- } else {
+ }
+ else {
boottype = topboottype;
bootletter = topbootletter;
}
@@ -238,12 +242,17 @@
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
info->size = 0x00200000;
+#ifdef CFG_LOWBOOT
+ offset = 0;
+#else
offset = 0x00e00000;
+#endif
info->start[0] = (ulong)addr + offset;
info->start[1] = (ulong)addr + offset + 0x4000;
info->start[2] = (ulong)addr + offset + 0x6000;
info->start[3] = (ulong)addr + offset + 0x8000;
- for (i = 4; i < info->sector_count; i++) {
+ for (i = 4; i < info->sector_count; i++)
+ {
info->start[i] = (ulong)addr + offset + 0x10000 * (i-3);
}
break;
@@ -252,8 +261,12 @@
info->flash_id += FLASH_AMDLV065D;
info->sector_count = 128;
info->size = 0x00800000;
+#ifdef CFG_LOWBOOT
+ offset = 0;
+#else
offset = 0x00800000;
- for (i = 0; i < info->sector_count; i++)
+#endif
+ for( i = 0; i < info->sector_count; i++ )
info->start[i] = (ulong)addr + offset + (i * 0x10000);
break; /* => 8 or 16 MB */
diff --git a/board/emk/top5200/top5200.c b/board/emk/top5200/top5200.c
index 536a515..3969e2a 100644
--- a/board/emk/top5200/top5200.c
+++ b/board/emk/top5200/top5200.c
@@ -36,8 +36,10 @@
{
ulong dramsize = 0;
#ifndef CFG_RAMBOOT
+#if 0
ulong t;
ulong tap_del;
+#endif
#define MODE_EN 0x80000000
#define SOFT_PRE 2
@@ -73,16 +75,19 @@
*(vu_long *)MPC5XXX_CDM_PORCFG = CFG_DRAM_TAP_DEL << 24;
#if 0
- for (tap_del = 0; tap_del < 32; tap_del++) {
+ for (tap_del = 0; tap_del < 32; tap_del++)
+ {
*(vu_long *)MPC5XXX_CDM_PORCFG = tap_del << 24;
printf ("\nTAP Delay:%x Filling DRAM...", *(vu_long *)MPC5XXX_CDM_PORCFG);
for (t = 0; t < 0x04000000; t+=4)
*(vu_long *) t = t;
printf ("Checking DRAM...\n");
- for (t = 0; t < 0x04000000; t+=4) {
+ for (t = 0; t < 0x04000000; t+=4)
+ {
ulong rval = *(vu_long *) t;
- if (rval != t) {
+ if (rval != t)
+ {
printf ("mismatch at %x: ", t);
printf (" 1.read %x", rval);
printf (" 2.read %x", *(vu_long *) t);
diff --git a/board/icecube/icecube.c b/board/icecube/icecube.c
index e0adec3..27b7bab 100644
--- a/board/icecube/icecube.c
+++ b/board/icecube/icecube.c
@@ -126,7 +126,7 @@
/* setup config registers */
*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = 0x73722930;
*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = 0x47770000;
-
+
/* set tap delay to 0x10 */
*(vu_long *)MPC5XXX_CDM_PORCFG = 0x10000000;
#else
diff --git a/board/incaip/memsetup.S b/board/incaip/memsetup.S
index 70d2885..b438484 100644
--- a/board/incaip/memsetup.S
+++ b/board/incaip/memsetup.S
@@ -13,7 +13,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -27,35 +27,35 @@
#include <asm/regdef.h>
-#define EBU_MODUL_BASE 0xB8000200
-#define EBU_CLC(value) 0x0000(value)
-#define EBU_CON(value) 0x0010(value)
-#define EBU_ADDSEL0(value) 0x0020(value)
-#define EBU_ADDSEL1(value) 0x0024(value)
-#define EBU_ADDSEL2(value) 0x0028(value)
-#define EBU_BUSCON0(value) 0x0060(value)
-#define EBU_BUSCON1(value) 0x0064(value)
-#define EBU_BUSCON2(value) 0x0068(value)
+#define EBU_MODUL_BASE 0xB8000200
+#define EBU_CLC(value) 0x0000(value)
+#define EBU_CON(value) 0x0010(value)
+#define EBU_ADDSEL0(value) 0x0020(value)
+#define EBU_ADDSEL1(value) 0x0024(value)
+#define EBU_ADDSEL2(value) 0x0028(value)
+#define EBU_BUSCON0(value) 0x0060(value)
+#define EBU_BUSCON1(value) 0x0064(value)
+#define EBU_BUSCON2(value) 0x0068(value)
-#define MC_MODUL_BASE 0xBF800000
-#define MC_ERRCAUSE(value) 0x0100(value)
-#define MC_ERRADDR(value) 0x0108(value)
-#define MC_IOGP(value) 0x0800(value)
-#define MC_SELFRFSH(value) 0x0A00(value)
-#define MC_CTRLENA(value) 0x1000(value)
-#define MC_MRSCODE(value) 0x1008(value)
-#define MC_CFGDW(value) 0x1010(value)
-#define MC_CFGPB0(value) 0x1018(value)
-#define MC_LATENCY(value) 0x1038(value)
-#define MC_TREFRESH(value) 0x1040(value)
+#define MC_MODUL_BASE 0xBF800000
+#define MC_ERRCAUSE(value) 0x0100(value)
+#define MC_ERRADDR(value) 0x0108(value)
+#define MC_IOGP(value) 0x0800(value)
+#define MC_SELFRFSH(value) 0x0A00(value)
+#define MC_CTRLENA(value) 0x1000(value)
+#define MC_MRSCODE(value) 0x1008(value)
+#define MC_CFGDW(value) 0x1010(value)
+#define MC_CFGPB0(value) 0x1018(value)
+#define MC_LATENCY(value) 0x1038(value)
+#define MC_TREFRESH(value) 0x1040(value)
-#define CGU_MODUL_BASE 0xBF107000
-#define CGU_PLL1CR(value) 0x0008(value)
-#define CGU_DIVCR(value) 0x0010(value)
-#define CGU_MUXCR(value) 0x0014(value)
-#define CGU_PLL1SR(value) 0x000C(value)
+#define CGU_MODUL_BASE 0xBF107000
+#define CGU_PLL1CR(value) 0x0008(value)
+#define CGU_DIVCR(value) 0x0010(value)
+#define CGU_MUXCR(value) 0x0014(value)
+#define CGU_PLL1SR(value) 0x000C(value)
- .set noreorder
+ .set noreorder
/*
@@ -234,4 +234,3 @@
j ra
nop
.end memsetup
-
diff --git a/board/mpl/common/common_util.c b/board/mpl/common/common_util.c
index 17871d2..9c98c93 100644
--- a/board/mpl/common/common_util.c
+++ b/board/mpl/common/common_util.c
@@ -54,7 +54,7 @@
static image_header_t header;
-static int
+static int
mpl_prg(uchar *src, ulong size)
{
ulong start;
@@ -105,7 +105,6 @@
flash_perror(rc);
return (1);
}
-
#elif defined(CONFIG_VCMA9)
start = 0;
@@ -125,7 +124,8 @@
}
#endif
- printf("flash erased, programming from 0x%lx 0x%lx Bytes\n",src,size);
+ printf("flash erased, programming from 0x%lx 0x%lx Bytes\n",
+ (ulong)src, size);
if ((rc = flash_write (src, start, size)) != 0) {
puts("ERROR ");
flash_perror(rc);
@@ -136,14 +136,14 @@
}
-static int
+static int
mpl_prg_image(uchar *ld_addr)
{
unsigned long len, checksum;
uchar *data;
image_header_t *hdr = &header;
int rc;
-
+
/* Copy header so we can blank CRC field for re-calculation */
memcpy (&header, (char *)ld_addr, sizeof(image_header_t));
if (ntohl(hdr->ih_magic) != IH_MAGIC) {
@@ -183,7 +183,7 @@
puts("Insufficient space for decompression\n");
return 1;
}
-
+
switch (hdr->ih_comp) {
case IH_COMP_GZIP:
puts("Uncompressing (GZIP) ... ");
@@ -217,13 +217,13 @@
free(buf);
return 1;
}
-
+
rc = mpl_prg(buf, len);
free(buf);
} else {
rc = mpl_prg(data, len);
}
-
+
return(rc);
}
@@ -445,7 +445,7 @@
ld_addr=CFG_LOAD_ADDR;
result=do_fdcboot(cmdtp, 0, 1, local_args);
}
- result=mpl_prg_image(ld_addr);
+ result=mpl_prg_image((uchar *)ld_addr);
return result;
}
#endif /* (CONFIG_COMMANDS & CFG_CMD_FDC) */
diff --git a/board/mvblue/mvblue.c b/board/mvblue/mvblue.c
index 6827a23..0cec63f 100644
--- a/board/mvblue/mvblue.c
+++ b/board/mvblue/mvblue.c
@@ -11,80 +11,86 @@
#include <ns16550.h>
#ifdef CONFIG_PCI
- #include <pci.h>
+#include <pci.h>
#endif
-u32 get_BoardType(void);
+u32 get_BoardType (void);
#define PCI_CONFIG(b,d,f,r) cpu_to_le32(0x80000000 | ((b&0xff)<<16) \
- | ((d&0x1f)<<11) \
- | ((f&0x7)<<7) \
- | (r&0xfc) )
+ | ((d&0x1f)<<11) \
+ | ((f&0x7)<<7) \
+ | (r&0xfc) )
-int mv_pci_read( int bus, int dev, int func, int reg )
+int mv_pci_read (int bus, int dev, int func, int reg)
{
- *(u32*)(0xfec00cf8) = PCI_CONFIG(bus,dev,func,reg);
- asm("sync");
- return cpu_to_le32( *(u32*)(0xfee00cfc) );
-}
-u32 get_BoardType() {
- return ( mv_pci_read(0,0xe,0,0) == 0x06801095 ? 0 : 1 );
+ *(u32 *) (0xfec00cf8) = PCI_CONFIG (bus, dev, func, reg);
+ asm ("sync");
+ return cpu_to_le32 (*(u32 *) (0xfee00cfc));
}
-void init_2nd_DUART(void)
+u32 get_BoardType ()
{
- NS16550_t console = (NS16550_t)CFG_NS16550_COM2;
+ return (mv_pci_read (0, 0xe, 0, 0) == 0x06801095 ? 0 : 1);
+}
+
+void init_2nd_DUART (void)
+{
+ NS16550_t console = (NS16550_t) CFG_NS16550_COM2;
int clock_divisor = CFG_NS16550_CLK / 16 / CONFIG_BAUDRATE;
- *(u8*)(0xfc004511) = 0x1;
- NS16550_init(console, clock_divisor);
+
+ *(u8 *) (0xfc004511) = 0x1;
+ NS16550_init (console, clock_divisor);
}
-void hw_watchdog_reset(void)
+void hw_watchdog_reset (void)
{
- if (get_BoardType() == 0 ) {
- *(u32*)(0xff000005) = 0;
- asm("sync");
+ if (get_BoardType () == 0) {
+ *(u32 *) (0xff000005) = 0;
+ asm ("sync");
}
}
int checkboard (void)
{
DECLARE_GLOBAL_DATA_PTR;
- ulong busfreq = get_bus_freq(0);
- char buf[32];
- u32 BoardType = get_BoardType();
+ ulong busfreq = get_bus_freq (0);
+ char buf[32];
+ u32 BoardType = get_BoardType ();
char *BoardName[2] = { "mvBlueBOX", "mvBlueLYNX" };
char *p;
bd_t *bd = gd->bd;
- hw_watchdog_reset();
+ hw_watchdog_reset ();
- printf("U-Boot (%s) running on mvBLUE device.\n", MV_VERSION);
- printf(" Found %s running at %s MHz memory clock.\n", BoardName[BoardType], strmhz(buf, busfreq) );
+ printf ("U-Boot (%s) running on mvBLUE device.\n", MV_VERSION);
+ printf (" Found %s running at %s MHz memory clock.\n",
+ BoardName[BoardType], strmhz (buf, busfreq));
- init_2nd_DUART();
+ init_2nd_DUART ();
- if ( (p = getenv("console_nr")) != NULL ) {
- unsigned long con_nr = simple_strtoul( p, NULL, 10) & 3;
- bd->bi_baudrate &= ~3;
- bd->bi_baudrate |= con_nr & 3;
+ if ((p = getenv ("console_nr")) != NULL) {
+ unsigned long con_nr = simple_strtoul (p, NULL, 10) & 3;
+
+ bd->bi_baudrate &= ~3;
+ bd->bi_baudrate |= con_nr & 3;
}
return 0;
}
long int initdram (int board_type)
{
- int i, cnt;
- volatile uchar * base= CFG_SDRAM_BASE;
- volatile ulong * addr;
- ulong save[32];
- ulong val, ret = 0;
+ int i, cnt;
+ volatile uchar *base = CFG_SDRAM_BASE;
+ volatile ulong *addr;
+ ulong save[32];
+ ulong val, ret = 0;
- for (i=0, cnt=(CFG_MAX_RAM_SIZE / sizeof(long)) >> 1; cnt > 0; cnt >>= 1) {
- addr = (volatile ulong *)base + cnt;
+ for (i = 0, cnt = (CFG_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0;
+ cnt >>= 1) {
+ addr = (volatile ulong *) base + cnt;
save[i++] = *addr;
*addr = ~cnt;
}
- addr = (volatile ulong *)base;
+ addr = (volatile ulong *) base;
save[i] = *addr;
*addr = 0;
@@ -93,102 +99,113 @@
goto Done;
}
- for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof(long); cnt <<= 1) {
- addr = (volatile ulong *)base + cnt;
+ for (cnt = 1; cnt <= CFG_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) {
+ addr = (volatile ulong *) base + cnt;
val = *addr;
*addr = save[--i];
if (val != ~cnt) {
- ulong new_bank0_end = cnt * sizeof(long) - 1;
- ulong mear1 = mpc824x_mpc107_getreg(MEAR1);
- ulong emear1 = mpc824x_mpc107_getreg(EMEAR1);
- mear1 = (mear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_ADDR_SHIFT);
+ ulong new_bank0_end = cnt * sizeof (long) - 1;
+ ulong mear1 = mpc824x_mpc107_getreg (MEAR1);
+ ulong emear1 = mpc824x_mpc107_getreg (EMEAR1);
+
+ mear1 = (mear1 & 0xFFFFFF00) |
+ ((new_bank0_end & MICR_ADDR_MASK) >>
+ MICR_ADDR_SHIFT);
emear1 = (emear1 & 0xFFFFFF00) |
- ((new_bank0_end & MICR_ADDR_MASK) >> MICR_EADDR_SHIFT);
- mpc824x_mpc107_setreg(MEAR1, mear1);
- mpc824x_mpc107_setreg(EMEAR1, emear1);
- ret = cnt * sizeof(long);
+ ((new_bank0_end & MICR_ADDR_MASK) >>
+ MICR_EADDR_SHIFT);
+ mpc824x_mpc107_setreg (MEAR1, mear1);
+ mpc824x_mpc107_setreg (EMEAR1, emear1);
+ ret = cnt * sizeof (long);
goto Done;
}
}
ret = CFG_MAX_RAM_SIZE;
-Done:
+ Done:
return ret;
}
/* ------------------------------------------------------------------------- */
-u8 *dhcp_vendorex_prep(u8 *e)
+u8 *dhcp_vendorex_prep (u8 * e)
{
-char *ptr;
+ char *ptr;
/* DHCP vendor-class-identifier = 60 */
- if ((ptr = getenv("dhcp_vendor-class-identifier"))) {
- *e++ = 60;
- *e++ = strlen(ptr);
- while (*ptr)
- *e++ = *ptr++;
- }
+ if ((ptr = getenv ("dhcp_vendor-class-identifier"))) {
+ *e++ = 60;
+ *e++ = strlen (ptr);
+ while (*ptr)
+ *e++ = *ptr++;
+ }
/* my DHCP_CLIENT_IDENTIFIER = 61 */
- if ((ptr = getenv("dhcp_client_id"))) {
- *e++ = 61;
- *e++ = strlen(ptr);
- while (*ptr)
- *e++ = *ptr++;
- }
- return e;
+ if ((ptr = getenv ("dhcp_client_id"))) {
+ *e++ = 61;
+ *e++ = strlen (ptr);
+ while (*ptr)
+ *e++ = *ptr++;
+ }
+ return e;
}
-u8 *dhcp_vendorex_proc(u8 *popt)
+
+u8 *dhcp_vendorex_proc (u8 * popt)
{
- return NULL;
+ return NULL;
}
+
/* ------------------------------------------------------------------------- */
/*
* Initialize PCI Devices
*/
#ifdef CONFIG_PCI
-void pci_mvblue_clear_base( struct pci_controller *hose, pci_dev_t dev )
+void pci_mvblue_clear_base (struct pci_controller *hose, pci_dev_t dev)
{
u32 cnt;
- printf("clear base @ dev/func 0x%02x/0x%02x ... ", PCI_DEV(dev), PCI_FUNC(dev) );
- for( cnt = 0; cnt < 6; cnt++ )
- pci_hose_write_config_dword( hose, dev, 0x10 + (4*cnt), 0x0 );
- printf("done\n");
+
+ printf ("clear base @ dev/func 0x%02x/0x%02x ... ", PCI_DEV (dev),
+ PCI_FUNC (dev));
+ for (cnt = 0; cnt < 6; cnt++)
+ pci_hose_write_config_dword (hose, dev, 0x10 + (4 * cnt),
+ 0x0);
+ printf ("done\n");
}
-void duart_setup( u32 base, u16 divisor )
+void duart_setup (u32 base, u16 divisor)
{
- printf("duart setup ...");
- out_8( (u8*)( CFG_ISA_IO+base+3), 0x80);
- out_8( (u8*)( CFG_ISA_IO+base+0), divisor & 0xff);
- out_8( (u8*)( CFG_ISA_IO+base+1), divisor >> 8 );
- out_8( (u8*)( CFG_ISA_IO+base+3), 0x03);
- out_8( (u8*)( CFG_ISA_IO+base+4), 0x03);
- out_8( (u8*)( CFG_ISA_IO+base+2), 0x07);
- printf("done\n");
+ printf ("duart setup ...");
+ out_8 ((u8 *) (CFG_ISA_IO + base + 3), 0x80);
+ out_8 ((u8 *) (CFG_ISA_IO + base + 0), divisor & 0xff);
+ out_8 ((u8 *) (CFG_ISA_IO + base + 1), divisor >> 8);
+ out_8 ((u8 *) (CFG_ISA_IO + base + 3), 0x03);
+ out_8 ((u8 *) (CFG_ISA_IO + base + 4), 0x03);
+ out_8 ((u8 *) (CFG_ISA_IO + base + 2), 0x07);
+ printf ("done\n");
}
-void pci_mvblue_fixup_irq_behind_bridge( struct pci_controller *hose, pci_dev_t bridge, unsigned char irq)
+void pci_mvblue_fixup_irq_behind_bridge (struct pci_controller *hose,
+ pci_dev_t bridge, unsigned char irq)
{
pci_dev_t d;
- unsigned char bus;
- unsigned short vendor,
- class;
+ unsigned char bus;
+ unsigned short vendor, class;
- pci_hose_read_config_byte( hose, bridge, PCI_SECONDARY_BUS, &bus );
- for (d = PCI_BDF(bus,0,0);
- d < PCI_BDF(bus,PCI_MAX_PCI_DEVICES-1,PCI_MAX_PCI_FUNCTIONS-1);
- d += PCI_BDF(0,0,1))
- {
- pci_hose_read_config_word(hose, d, PCI_VENDOR_ID, &vendor);
- if (vendor != 0xffff && vendor != 0x0000)
- {
- pci_hose_read_config_word( hose, d, PCI_CLASS_DEVICE, &class );
- if ( class == PCI_CLASS_BRIDGE_PCI )
- pci_mvblue_fixup_irq_behind_bridge( hose, d, irq );
+ pci_hose_read_config_byte (hose, bridge, PCI_SECONDARY_BUS, &bus);
+ for (d = PCI_BDF (bus, 0, 0);
+ d < PCI_BDF (bus, PCI_MAX_PCI_DEVICES - 1,
+ PCI_MAX_PCI_FUNCTIONS - 1);
+ d += PCI_BDF (0, 0, 1)) {
+ pci_hose_read_config_word (hose, d, PCI_VENDOR_ID, &vendor);
+ if (vendor != 0xffff && vendor != 0x0000) {
+ pci_hose_read_config_word (hose, d, PCI_CLASS_DEVICE,
+ &class);
+ if (class == PCI_CLASS_BRIDGE_PCI)
+ pci_mvblue_fixup_irq_behind_bridge (hose, d,
+ irq);
else
- pci_hose_write_config_byte( hose, d, PCI_INTERRUPT_LINE, irq );
+ pci_hose_write_config_byte (hose, d,
+ PCI_INTERRUPT_LINE,
+ irq);
}
}
}
@@ -196,58 +213,64 @@
#define MV_MAX_PCI_BUSSES 3
#define SLOT0_IRQ 3
#define SLOT1_IRQ 4
-void pci_mvblue_fixup_irq(struct pci_controller *hose, pci_dev_t dev)
+void pci_mvblue_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
{
- unsigned char line=0xff;
- unsigned short class;
+ unsigned char line = 0xff;
+ unsigned short class;
- if( PCI_BUS(dev) == 0 ) {
- switch(PCI_DEV(dev)) {
- case 0xd:
- if ( get_BoardType() == 0 ) {
+ if (PCI_BUS (dev) == 0) {
+ switch (PCI_DEV (dev)) {
+ case 0xd:
+ if (get_BoardType () == 0) {
line = 1;
} else
/* mvBL */
- line = 2;
- break;
- case 0xe:
+ line = 2;
+ break;
+ case 0xe:
/* mvBB: IDE */
line = 2;
- pci_hose_write_config_byte(hose, dev, 0x8a, 0x20 );
+ pci_hose_write_config_byte (hose, dev, 0x8a, 0x20);
break;
case 0xf:
/* mvBB: Slot0 (Grabber) */
- pci_hose_read_config_word( hose, dev, PCI_CLASS_DEVICE, &class );
- if ( class == PCI_CLASS_BRIDGE_PCI ) {
- pci_mvblue_fixup_irq_behind_bridge( hose, dev, SLOT0_IRQ );
+ pci_hose_read_config_word (hose, dev,
+ PCI_CLASS_DEVICE, &class);
+ if (class == PCI_CLASS_BRIDGE_PCI) {
+ pci_mvblue_fixup_irq_behind_bridge (hose, dev,
+ SLOT0_IRQ);
line = 0xff;
} else
line = SLOT0_IRQ;
break;
case 0x10:
/* mvBB: Slot1 */
- pci_hose_read_config_word( hose, dev, PCI_CLASS_DEVICE, &class );
- if ( class == PCI_CLASS_BRIDGE_PCI ) {
- pci_mvblue_fixup_irq_behind_bridge( hose, dev, SLOT1_IRQ );
+ pci_hose_read_config_word (hose, dev,
+ PCI_CLASS_DEVICE, &class);
+ if (class == PCI_CLASS_BRIDGE_PCI) {
+ pci_mvblue_fixup_irq_behind_bridge (hose, dev,
+ SLOT1_IRQ);
line = 0xff;
} else
line = SLOT1_IRQ;
break;
- default:
- printf("***pci_scan: illegal dev = 0x%08x\n", PCI_DEV(dev) );
+ default:
+ printf ("***pci_scan: illegal dev = 0x%08x\n",
+ PCI_DEV (dev));
line = 0xff;
break;
- }
- pci_hose_write_config_byte(hose, dev, PCI_INTERRUPT_LINE, line );
+ }
+ pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE,
+ line);
}
}
struct pci_controller hose = {
- fixup_irq: pci_mvblue_fixup_irq
+ fixup_irq:pci_mvblue_fixup_irq
};
-void pci_init_board(void)
+void pci_init_board (void)
{
- pci_mpc824x_init(&hose);
+ pci_mpc824x_init (&hose);
}
#endif
diff --git a/board/snmc/qs850/flash.c b/board/snmc/qs850/flash.c
index d4e2cbb..d2f169b 100644
--- a/board/snmc/qs850/flash.c
+++ b/board/snmc/qs850/flash.c
@@ -151,7 +151,6 @@
}
-
/*-----------------------------------------------------------------------
This code is specific to the AM29DL163/AM29DL232 for the QS850/QS823.
*/
diff --git a/board/snmc/qs860t/flash.c b/board/snmc/qs860t/flash.c
index ab7c8a1..c84d08d 100644
--- a/board/snmc/qs860t/flash.c
+++ b/board/snmc/qs860t/flash.c
@@ -170,7 +170,6 @@
}
-
/*-----------------------------------------------------------------------
*/
diff --git a/board/tqm8260/tqm8260.c b/board/tqm8260/tqm8260.c
index a0a38ca..f716cf2 100644
--- a/board/tqm8260/tqm8260.c
+++ b/board/tqm8260/tqm8260.c
@@ -299,8 +299,7 @@
*addr = 0;
if ((val = *addr) != 0) {
- /* Restore the original data before leaving the function.
- */
+ /* Restore the original data before leaving the function. */
*addr = save[i];
for (cnt = 1; cnt <= maxsize / sizeof(long); cnt <<= 1) {
addr = (volatile ulong *) base + cnt;
@@ -315,8 +314,7 @@
*addr = save[--i];
if (val != ~cnt) {
size = cnt * sizeof (long);
- /* Restore the original data before leaving the function.
- */
+ /* Restore the original data before leaving the function. */
for (cnt <<= 1; cnt <= maxsize / sizeof (long); cnt <<= 1) {
addr = (volatile ulong *) base + cnt;
*addr = save[--i];
diff --git a/board/tqm8xx/flash.c b/board/tqm8xx/flash.c
index a974e23..b8a3595 100644
--- a/board/tqm8xx/flash.c
+++ b/board/tqm8xx/flash.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -21,7 +21,9 @@
* MA 02111-1307 USA
*/
-/* #define DEBUG */
+#if 0
+#define DEBUG
+#endif
#include <common.h>
#include <mpc8xx.h>
@@ -214,6 +216,8 @@
break;
case FLASH_AMLV640U: printf ("AM29LV640ML (64Mbit, uniform sector size)\n");
break;
+ case FLASH_AMLV320B: printf ("AM29LV320MB (32Mbit, bottom boot sect)\n");
+ break;
# else /* ! TQM8xxM */
case FLASH_AM400B: printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
break;
@@ -232,6 +236,8 @@
break;
case FLASH_AM160T: printf ("AM29LV160T (16 Mbit, top boot sector)\n");
break;
+ case FLASH_AMDL163B: printf ("AM29DL163B (16 Mbit, bottom boot sect)\n");
+ break;
default: printf ("Unknown Chip Type\n");
break;
}
@@ -280,12 +286,15 @@
switch (value) {
case AMD_MANUFACT:
+ debug ("Manufacturer: AMD\n");
info->flash_id = FLASH_MAN_AMD;
break;
case FUJ_MANUFACT:
+ debug ("Manufacturer: FUJITSU\n");
info->flash_id = FLASH_MAN_FUJ;
break;
default:
+ debug ("Manufacturer: *** unknown ***\n");
info->flash_id = FLASH_UNKNOWN;
info->sector_count = 0;
info->size = 0;
@@ -299,36 +308,53 @@
switch (value) {
#ifdef CONFIG_TQM8xxM /* mirror bit flash */
case AMD_ID_MIRROR:
+ debug ("Mirror Bit flash: addr[14] = %08lX addr[15] = %08lX\n",
+ addr[14], addr[15]);
/* Special case for AMLV320MH/L */
if ((addr[14] & 0x00ff00ff) == 0x001d001d &&
- (addr[15] & 0x00ff00ff) == 0x00000000) {
+ (addr[15] & 0x00ff00ff) == 0x00000000) {
+ debug ("Chip: AMLV320MH/L\n");
info->flash_id += FLASH_AMLV320U;
info->sector_count = 64;
- info->size = 0x00800000; /* => 8 MB */
+ info->size = 0x00800000; /* => 8 MB */
break;
}
switch(addr[14]) {
case AMD_ID_LV128U_2:
if (addr[15] != AMD_ID_LV128U_3) {
+ debug ("Chip: AMLV128U -> unknown\n");
info->flash_id = FLASH_UNKNOWN;
- }
- else {
+ } else {
+ debug ("Chip: AMLV128U\n");
info->flash_id += FLASH_AMLV128U;
info->sector_count = 256;
info->size = 0x02000000;
}
- break; /* => 32 MB */
+ break; /* => 32 MB */
case AMD_ID_LV640U_2:
if (addr[15] != AMD_ID_LV640U_3) {
+ debug ("Chip: AMLV640U -> unknown\n");
info->flash_id = FLASH_UNKNOWN;
- }
- else {
+ } else {
+ debug ("Chip: AMLV640U\n");
info->flash_id += FLASH_AMLV640U;
info->sector_count = 128;
info->size = 0x01000000;
}
- break; /* => 16 MB */
+ break; /* => 16 MB */
+ case AMD_ID_LV320B_2:
+ if (addr[15] != AMD_ID_LV320B_3) {
+ debug ("Chip: AMLV320B -> unknown\n");
+ info->flash_id = FLASH_UNKNOWN;
+ } else {
+ debug ("Chip: AMLV320B\n");
+ info->flash_id += FLASH_AMLV320B;
+ info->sector_count = 71;
+ info->size = 0x00800000;
+ }
+ break; /* => 8 MB */
default:
+ debug ("Chip: *** unknown ***\n");
info->flash_id = FLASH_UNKNOWN;
break;
}
@@ -338,50 +364,56 @@
info->flash_id += FLASH_AM400T;
info->sector_count = 11;
info->size = 0x00100000;
- break; /* => 1 MB */
+ break; /* => 1 MB */
case AMD_ID_LV400B:
info->flash_id += FLASH_AM400B;
info->sector_count = 11;
info->size = 0x00100000;
- break; /* => 1 MB */
+ break; /* => 1 MB */
case AMD_ID_LV800T:
info->flash_id += FLASH_AM800T;
info->sector_count = 19;
info->size = 0x00200000;
- break; /* => 2 MB */
+ break; /* => 2 MB */
case AMD_ID_LV800B:
info->flash_id += FLASH_AM800B;
info->sector_count = 19;
info->size = 0x00200000;
- break; /* => 2 MB */
+ break; /* => 2 MB */
case AMD_ID_LV320T:
info->flash_id += FLASH_AM320T;
info->sector_count = 71;
info->size = 0x00800000;
- break; /* => 8 MB */
+ break; /* => 8 MB */
case AMD_ID_LV320B:
info->flash_id += FLASH_AM320B;
info->sector_count = 71;
info->size = 0x00800000;
- break; /* => 8 MB */
+ break; /* => 8 MB */
#endif /* TQM8xxM */
case AMD_ID_LV160T:
info->flash_id += FLASH_AM160T;
info->sector_count = 35;
info->size = 0x00400000;
- break; /* => 4 MB */
+ break; /* => 4 MB */
case AMD_ID_LV160B:
info->flash_id += FLASH_AM160B;
info->sector_count = 35;
info->size = 0x00400000;
- break; /* => 4 MB */
+ break; /* => 4 MB */
+
+ case AMD_ID_DL163B:
+ info->flash_id += FLASH_AMDL163B;
+ info->sector_count = 39;
+ info->size = 0x00400000;
+ break; /* => 4 MB */
default:
info->flash_id = FLASH_UNKNOWN;
@@ -402,6 +434,18 @@
base += 0x20000;
}
break;
+ case FLASH_AMLV320B:
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base;
+ /*
+ * The first 8 sectors are 8 kB,
+ * all the other ones are 64 kB
+ */
+ base += (i < 8)
+ ? 2 * ( 8 << 10)
+ : 2 * (64 << 10);
+ }
+ break;
}
break;
# else /* ! TQM8xxM */
@@ -472,11 +516,24 @@
info->start[i] = base + i * 0x00020000;
}
break;
+ case AMD_ID_DL163B:
+ for (i = 0; i < info->sector_count; i++) {
+ info->start[i] = base;
+ /*
+ * The first 8 sectors are 8 kB,
+ * all the other ones are 64 kB
+ */
+ base += (i < 8)
+ ? 2 * ( 8 << 10)
+ : 2 * (64 << 10);
+ }
+ break;
default:
return (0);
break;
}
+#if 0
/* check for protected sectors */
for (i = 0; i < info->sector_count; i++) {
/* read sector protection at sector address, (A7 .. A0) = 0x02 */
@@ -484,6 +541,7 @@
addr = (volatile unsigned long *)(info->start[i]);
info->protect[i] = addr[2] & 1;
}
+#endif
/*
* Prevent writes to uninitialized FLASH.
diff --git a/board/tqm8xx/tqm8xx.c b/board/tqm8xx/tqm8xx.c
index 5f74650..c6b53ab 100644
--- a/board/tqm8xx/tqm8xx.c
+++ b/board/tqm8xx/tqm8xx.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000, 2001, 2002
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -21,6 +21,10 @@
* MA 02111-1307 USA
*/
+#if 0
+#define DEBUG
+#endif
+
#include <common.h>
#include <mpc8xx.h>
@@ -92,7 +96,7 @@
* If present, check for "L" type (no second DRAM bank),
* otherwise "L" type is assumed as default.
*
- * Set board_type to 'L' for "L" type, 0 else.
+ * Set board_type to 'L' for "L" type, 'M' for "M" type, 0 else.
*/
int checkboard (void)
@@ -112,6 +116,10 @@
gd->board_type = 'L';
}
+ if ((*(s + 6) == 'M')) { /* a TQM8xxM type */
+ gd->board_type = 'M';
+ }
+
for (; *s; ++s) {
if (*s == ' ')
break;
@@ -167,7 +175,8 @@
memctl->memc_br2 = CFG_BR2_PRELIM;
#ifndef CONFIG_CAN_DRIVER
- if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */
+ if ((board_type != 'L') &&
+ (board_type != 'M') ) { /* "L" and "M" type boards have only one bank SDRAM */
memctl->memc_or3 = CFG_OR3_PRELIM;
memctl->memc_br3 = CFG_BR3_PRELIM;
}
@@ -185,7 +194,8 @@
udelay (1);
#ifndef CONFIG_CAN_DRIVER
- if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */
+ if ((board_type != 'L') &&
+ (board_type != 'M') ) { /* "L" and "M" type boards have only one bank SDRAM */
memctl->memc_mcr = 0x80006105; /* SDRAM bank 1 */
udelay (1);
memctl->memc_mcr = 0x80006230; /* SDRAM bank 1 - execute twice */
@@ -204,6 +214,7 @@
*/
size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE2_PRELIM,
SDRAM_MAX_SIZE);
+ debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size8 >> 20);
udelay (1000);
@@ -212,33 +223,33 @@
*/
size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE2_PRELIM,
SDRAM_MAX_SIZE);
+ debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size9 >> 20);
if (size8 < size9) { /* leave configuration at 9 columns */
size_b0 = size9;
-/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
} else { /* back to 8 columns */
size_b0 = size8;
memctl->memc_mamr = CFG_MAMR_8COL;
udelay (500);
-/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
}
+ debug ("SDRAM Bank 0: %ld MB\n", size_b0 >> 20);
#ifndef CONFIG_CAN_DRIVER
- if (board_type != 'L') { /* "L" type boards have only one bank SDRAM */
+ if ((board_type != 'L') &&
+ (board_type != 'M') ) { /* "L" and "M" type boards have only one bank SDRAM */
/*
* Check Bank 1 Memory Size
* use current column settings
* [9 column SDRAM may also be used in 8 column mode,
* but then only half the real size will be used.]
*/
- size_b1 =
- dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM,
- SDRAM_MAX_SIZE);
-/* debug ("SDRAM Bank 1: %ld MB\n", size8 >> 20); */
+ size_b1 = dram_size (memctl->memc_mamr, (ulong *) SDRAM_BASE3_PRELIM,
+ SDRAM_MAX_SIZE);
+ debug ("SDRAM Bank 1: %ld MB\n", size_b1 >> 20);
} else {
size_b1 = 0;
}
-#endif /* CONFIG_CAN_DRIVER */
+#endif /* CONFIG_CAN_DRIVER */
udelay (1000);
@@ -383,8 +394,7 @@
* - short between data lines
*/
-static long int dram_size (long int mamr_value, long int *base,
- long int maxsize)
+static long int dram_size (long int mamr_value, long int *base, long int maxsize)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
diff --git a/board/trab/auto_update.c b/board/trab/auto_update.c
index 36fdf18..393e094 100644
--- a/board/trab/auto_update.c
+++ b/board/trab/auto_update.c
@@ -279,8 +279,8 @@
printf ("Image %s wrong type\n", aufile[idx]);
return -1;
}
- if ((idx == IDX_APP) && (hdr->ih_type != IH_TYPE_RAMDISK)
- && (hdr->ih_type != IH_TYPE_FILESYSTEM)) {
+ if ((idx == IDX_APP) && (hdr->ih_type != IH_TYPE_RAMDISK)
+ && (hdr->ih_type != IH_TYPE_FILESYSTEM)) {
printf ("Image %s wrong type\n", aufile[idx]);
return -1;
}
diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
index 5e31400..34a74ce 100644
--- a/common/cmd_bootm.c
+++ b/common/cmd_bootm.c
@@ -263,7 +263,7 @@
case IH_TYPE_KERNEL:
name = "Kernel Image";
break;
- case IH_TYPE_MULTI:
+ case IH_TYPE_MULTI:
name = "Multi-File Image";
len = ntohl(len_ptr[0]);
/* OS kernel is always the first image */
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 253f9ef..e5b1ca1 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -333,15 +333,15 @@
status = dataflash_real_protect(p,addr_first,addr_last);
if (status < 0){
printf("Bad DataFlash sector specification\n");
- return 1;
- }
- printf("%sProtect %d DataFlash Sectors\n",
- p ? "" : "Un-", status);
+ return 1;
+ }
+ printf("%sProtect %d DataFlash Sectors\n",
+ p ? "" : "Un-", status);
return 0;
}
}
#endif
-
+
if (strcmp(argv[2], "all") == 0) {
for (bank=1; bank<=CFG_MAX_FLASH_BANKS; ++bank) {
info = &flash_info[bank-1];
diff --git a/common/cmd_fpga.c b/common/cmd_fpga.c
index 41ed459..e674ef4 100644
--- a/common/cmd_fpga.c
+++ b/common/cmd_fpga.c
@@ -45,8 +45,8 @@
#if defined (CONFIG_FPGA) && ( CONFIG_COMMANDS & CFG_CMD_FPGA )
/* Local functions */
-static void fpga_usage ( cmd_tbl_t *cmdtp );
-static int fpga_get_op( char *opstr );
+static void fpga_usage (cmd_tbl_t * cmdtp);
+static int fpga_get_op (char *opstr);
/* Local defines */
#define FPGA_NONE -1
@@ -62,106 +62,106 @@
* If there is no data addr field, the fpgadata environment variable is used.
* The info command requires no data address field.
*/
-int
-do_fpga (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_fpga (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
{
- int op, dev = FPGA_INVALID_DEVICE;
- size_t data_size = 0;
- void *fpga_data = NULL;
- char *devstr = getenv("fpga");
- char *datastr = getenv("fpgadata");
- int rc = FPGA_FAIL;
+ int op, dev = FPGA_INVALID_DEVICE;
+ size_t data_size = 0;
+ void *fpga_data = NULL;
+ char *devstr = getenv ("fpga");
+ char *datastr = getenv ("fpgadata");
+ int rc = FPGA_FAIL;
- if ( devstr ) dev = (int)simple_strtoul( devstr, NULL, 16 );
- if ( datastr ) fpga_data = (void *)simple_strtoul( datastr, NULL, 16 );
+ if (devstr)
+ dev = (int) simple_strtoul (devstr, NULL, 16);
+ if (datastr)
+ fpga_data = (void *) simple_strtoul (datastr, NULL, 16);
- switch ( argc )
- {
- case 5: /* fpga <op> <dev> <data> <datasize> */
- data_size = simple_strtoul( argv[4], NULL, 16 );
- case 4: /* fpga <op> <dev> <data> */
- fpga_data = (void *)simple_strtoul( argv[3], NULL, 16 );
- PRINTF(__FUNCTION__": fpga_data = 0x%x\n", (uint)fpga_data );
- case 3: /* fpga <op> <dev | data addr> */
- dev = (int)simple_strtoul( argv[2], NULL, 16 );
- PRINTF(__FUNCTION__": device = %d\n", dev );
- /* FIXME - this is a really weak test */
- if (( argc == 3 ) && ( dev > fpga_count() )) { /* must be buffer ptr */
- PRINTF(__FUNCTION__": Assuming buffer pointer in arg 3\n");
- fpga_data = (void *)dev;
- PRINTF(__FUNCTION__": fpga_data = 0x%x\n", (uint)fpga_data );
- dev = FPGA_INVALID_DEVICE; /* reset device num */
- }
- case 2: /* fpga <op> */
- op = (int)fpga_get_op( argv[1] );
- break;
- default:
- PRINTF(__FUNCTION__": Too many or too few args (%d)\n", argc );
- op = FPGA_NONE; /* force usage display */
- break;
- }
+ switch (argc) {
+ case 5: /* fpga <op> <dev> <data> <datasize> */
+ data_size = simple_strtoul (argv[4], NULL, 16);
+ case 4: /* fpga <op> <dev> <data> */
+ fpga_data = (void *) simple_strtoul (argv[3], NULL, 16);
+ PRINTF (__FUNCTION__ ": fpga_data = 0x%x\n",
+ (uint) fpga_data);
+ case 3: /* fpga <op> <dev | data addr> */
+ dev = (int) simple_strtoul (argv[2], NULL, 16);
+ PRINTF (__FUNCTION__ ": device = %d\n", dev);
+ /* FIXME - this is a really weak test */
+ if ((argc == 3) && (dev > fpga_count ())) { /* must be buffer ptr */
+ PRINTF (__FUNCTION__
+ ": Assuming buffer pointer in arg 3\n");
+ fpga_data = (void *) dev;
+ PRINTF (__FUNCTION__ ": fpga_data = 0x%x\n",
+ (uint) fpga_data);
+ dev = FPGA_INVALID_DEVICE; /* reset device num */
+ }
+ case 2: /* fpga <op> */
+ op = (int) fpga_get_op (argv[1]);
+ break;
+ default:
+ PRINTF (__FUNCTION__ ": Too many or too few args (%d)\n",
+ argc);
+ op = FPGA_NONE; /* force usage display */
+ break;
+ }
- switch ( op ) {
- case FPGA_NONE:
- fpga_usage( cmdtp );
- break;
+ switch (op) {
+ case FPGA_NONE:
+ fpga_usage (cmdtp);
+ break;
- case FPGA_INFO:
- rc = fpga_info( dev );
- break;
+ case FPGA_INFO:
+ rc = fpga_info (dev);
+ break;
- case FPGA_LOAD:
- rc = fpga_load( dev, fpga_data, data_size );
- break;
+ case FPGA_LOAD:
+ rc = fpga_load (dev, fpga_data, data_size);
+ break;
- case FPGA_DUMP:
- rc = fpga_dump( dev, fpga_data, data_size );
- break;
+ case FPGA_DUMP:
+ rc = fpga_dump (dev, fpga_data, data_size);
+ break;
- default:
- printf( "Unknown operation.\n" );
- fpga_usage( cmdtp );
- break;
- }
- return (rc);
+ default:
+ printf ("Unknown operation.\n");
+ fpga_usage (cmdtp);
+ break;
+ }
+ return (rc);
}
-static void fpga_usage ( cmd_tbl_t *cmdtp )
+static void fpga_usage (cmd_tbl_t * cmdtp)
{
- printf( "Usage:\n%s\n", cmdtp->usage );
+ printf ("Usage:\n%s\n", cmdtp->usage);
}
/*
* Map op to supported operations. We don't use a table since we
* would just have to relocate it from flash anyway.
*/
-static int fpga_get_op( char *opstr )
+static int fpga_get_op (char *opstr)
{
int op = FPGA_NONE;
if (!strcmp ("info", opstr)) {
op = FPGA_INFO;
- }
- else if (!strcmp ("load", opstr)) {
+ } else if (!strcmp ("load", opstr)) {
op = FPGA_LOAD;
- }
- else if (!strcmp ("dump", opstr)) {
+ } else if (!strcmp ("dump", opstr)) {
op = FPGA_DUMP;
}
- if ( op == FPGA_NONE ) {
+ if (op == FPGA_NONE) {
printf ("Unknown fpga operation \"%s\"\n", opstr);
}
return op;
}
-U_BOOT_CMD(
- fpga, 6, 1, do_fpga,
- "fpga - loadable FPGA image support\n",
- "fpga [operation type] [device number] [image address] [image size]\n"
- "fpga operations:\n"
- "\tinfo\tlist known device information.\n"
- "\tload\tLoad device from memory buffer.\n"
- "\tdump\tLoad device to memory buffer.\n"
-);
-#endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */
+U_BOOT_CMD (fpga, 6, 1, do_fpga,
+ "fpga - loadable FPGA image support\n",
+ "fpga [operation type] [device number] [image address] [image size]\n"
+ "fpga operations:\n"
+ "\tinfo\tlist known device information.\n"
+ "\tload\tLoad device from memory buffer.\n"
+ "\tdump\tLoad device to memory buffer.\n");
+#endif /* CONFIG_FPGA && CONFIG_COMMANDS & CFG_CMD_FPGA */
diff --git a/common/cmd_ide.c b/common/cmd_ide.c
index 3f18b00..331041c 100644
--- a/common/cmd_ide.c
+++ b/common/cmd_ide.c
@@ -771,7 +771,7 @@
{
PRINTF ("ide_outb (dev= %d, port= %d, val= 0x%02x) : @ 0x%08lx\n",
dev, port, val, (ATA_CURR_BASE(dev)+port));
-
+
/* Ensure I/O operations complete */
__asm__ volatile("eieio");
*((uchar *)(ATA_CURR_BASE(dev)+port)) = val;
diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index 35b3901..6ccad70 100644
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -146,9 +146,9 @@
if ((rc = read_dataflash(addr, (linebytes/size)*size, linebuf)) == DATAFLASH_OK){
/* if outside dataflash */
/*if (rc != 1) {
- dataflash_perror (rc);
- return (1);
- }*/
+ dataflash_perror (rc);
+ return (1);
+ }*/
for (i=0; i<linebytes; i+= size) {
if (size == 4) {
printf(" %08x", *uip++);
@@ -439,9 +439,9 @@
int rc;
rc = read_dataflash(addr, count * size, (char *) dest);
if (rc != 1) {
- dataflash_perror (rc);
- return (1);
- }
+ dataflash_perror (rc);
+ return (1);
+ }
return 0;
}
diff --git a/cpu/coldfire/Makefile b/cpu/coldfire/Makefile
index 085d840..3976f56 100644
--- a/cpu/coldfire/Makefile
+++ b/cpu/coldfire/Makefile
@@ -27,7 +27,7 @@
LIB = lib$(CPU).a
-START =
+START =
OBJS = kgdb.o serial.o interrupts.o cpu.o speed.o cpu_init.o fec.o
all: .depend $(START) $(LIB)
diff --git a/cpu/coldfire/fec.c b/cpu/coldfire/fec.c
index 53a93c1..5062741 100644
--- a/cpu/coldfire/fec.c
+++ b/cpu/coldfire/fec.c
@@ -27,7 +27,6 @@
#include <command.h>
-
/**************************************************************
*
* FEC Ethernet Initialization Routine
@@ -50,18 +49,14 @@
#define FEC_RESET_DELAY 50000
-
/* Ethernet Transmit and Receive Buffers */
#define DBUF_LENGTH 1520
-
#define TX_BUF_CNT 2
-
#define TOUT_LOOP 100
-#define PKT_MAXBUF_SIZE 1518
-#define PKT_MINBUF_SIZE 64
-#define PKT_MAXBLR_SIZE 1520
-
+#define PKT_MAXBUF_SIZE 1518
+#define PKT_MINBUF_SIZE 64
+#define PKT_MAXBLR_SIZE 1520
#ifdef CONFIG_M5272
@@ -76,11 +71,10 @@
#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(FEC_ENET)
-
static char txbuf[DBUF_LENGTH];
-static uint rxIdx; /* index of the current RX buffer */
-static uint txIdx; /* index of the current TX buffer */
+static uint rxIdx; /* index of the current RX buffer */
+static uint txIdx; /* index of the current TX buffer */
/*
* FEC Ethernet Tx and Rx buffer descriptors allocated at the
@@ -89,14 +83,14 @@
*/
typedef volatile struct CommonBufferDescriptor {
- cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
- cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
+ cbd_t rxbd[PKTBUFSRX]; /* Rx BD */
+ cbd_t txbd[TX_BUF_CNT]; /* Tx BD */
} RTXBD;
static RTXBD *rtx = 0x380000;
-int eth_send(volatile void *packet, int length)
+int eth_send (volatile void *packet, int length)
{
int j, rc;
volatile fec_t *fecp = FEC_ADDR;
@@ -105,35 +99,37 @@
* Wait for ready
*/
j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay(1);
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY)
+ && (j < TOUT_LOOP)) {
+ udelay (1);
j++;
}
- if (j>=TOUT_LOOP) {
- printf("TX not ready\n");
+ if (j >= TOUT_LOOP) {
+ printf ("TX not ready\n");
}
- rtx->txbd[txIdx].cbd_bufaddr = (uint)packet;
- rtx->txbd[txIdx].cbd_datlen = length;
+ rtx->txbd[txIdx].cbd_bufaddr = (uint) packet;
+ rtx->txbd[txIdx].cbd_datlen = length;
rtx->txbd[txIdx].cbd_sc |= BD_ENET_TX_READY | BD_ENET_TX_LAST;
/* Activate transmit Buffer Descriptor polling */
- fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
+ fecp->fec_x_des_active = 0x01000000; /* Descriptor polling active */
j = 0;
- while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY) && (j<TOUT_LOOP)) {
- udelay(1);
+ while ((rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_READY)
+ && (j < TOUT_LOOP)) {
+ udelay (1);
j++;
}
- if (j>=TOUT_LOOP) {
- printf("TX timeout\n");
+ if (j >= TOUT_LOOP) {
+ printf ("TX timeout\n");
}
#ifdef ET_DEBUG
- printf("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
- __FILE__,__LINE__,__FUNCTION__,j,rtx->txbd[txIdx].cbd_sc,
- (rtx->txbd[txIdx].cbd_sc & 0x003C)>>2);
+ printf ("%s[%d] %s: cycles: %d status: %x retry cnt: %d\n",
+ __FILE__, __LINE__, __FUNCTION__, j, rtx->txbd[txIdx].cbd_sc,
+ (rtx->txbd[txIdx].cbd_sc & 0x003C) >> 2);
#endif
- /* return only status bits */;
+ /* return only status bits */ ;
rc = (rtx->txbd[txIdx].cbd_sc & BD_ENET_TX_STATS);
txIdx = (txIdx + 1) % TX_BUF_CNT;
@@ -141,48 +137,49 @@
return rc;
}
-int eth_rx(void)
+int eth_rx (void)
{
int length;
volatile fec_t *fecp = FEC_ADDR;
- for (;;)
- {
- /* section 16.9.23.2 */
- if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
- length = -1;
- break; /* nothing received - leave for() loop */
- }
+ for (;;) {
+ /* section 16.9.23.2 */
+ if (rtx->rxbd[rxIdx].cbd_sc & BD_ENET_RX_EMPTY) {
+ length = -1;
+ break; /* nothing received - leave for() loop */
+ }
- length = rtx->rxbd[rxIdx].cbd_datlen;
+ length = rtx->rxbd[rxIdx].cbd_datlen;
- if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
+ if (rtx->rxbd[rxIdx].cbd_sc & 0x003f) {
#ifdef ET_DEBUG
- printf("%s[%d] err: %x\n",
- __FUNCTION__,__LINE__,rtx->rxbd[rxIdx].cbd_sc);
+ printf ("%s[%d] err: %x\n",
+ __FUNCTION__, __LINE__,
+ rtx->rxbd[rxIdx].cbd_sc);
#endif
- } else {
- /* Pass the packet up to the protocol layers. */
- NetReceive(NetRxPackets[rxIdx], length - 4);
+ } else {
+ /* Pass the packet up to the protocol layers. */
+ NetReceive (NetRxPackets[rxIdx], length - 4);
+ }
+
+ /* Give the buffer back to the FEC. */
+ rtx->rxbd[rxIdx].cbd_datlen = 0;
+
+ /* wrap around buffer index when necessary */
+ if ((rxIdx + 1) >= PKTBUFSRX) {
+ rtx->rxbd[PKTBUFSRX - 1].cbd_sc =
+ (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
+ rxIdx = 0;
+ } else {
+ rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
+ rxIdx++;
+ }
+
+ /* Try to fill Buffer Descriptors */
+ fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
}
- /* Give the buffer back to the FEC. */
- rtx->rxbd[rxIdx].cbd_datlen = 0;
-
- /* wrap around buffer index when necessary */
- if ((rxIdx + 1) >= PKTBUFSRX) {
- rtx->rxbd[PKTBUFSRX - 1].cbd_sc = (BD_ENET_RX_WRAP | BD_ENET_RX_EMPTY);
- rxIdx = 0;
- } else {
- rtx->rxbd[rxIdx].cbd_sc = BD_ENET_RX_EMPTY;
- rxIdx++;
- }
-
- /* Try to fill Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
- }
-
- return length;
+ return length;
}
@@ -191,7 +188,7 @@
int i;
volatile fec_t *fecp = FEC_ADDR;
-
+
/* Whack a reset.
* A delay is required between a reset of the FEC block and
* initialization of other FEC registers because the reset takes
@@ -214,21 +211,21 @@
/* We use strictly polling mode only
*/
fecp->fec_imask = 0;
-
+
/* Clear any pending interrupt */
fecp->fec_ievent = 0xffffffff;
-
- /* Set station address */
+
+ /* Set station address */
#define ea bd->bi_enetaddr
- fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) |
- (ea[2] << 8) | (ea[3] ) ;
- fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16 ) ;
+ fecp->fec_addr_low = (ea[0] << 24) | (ea[1] << 16) |
+ (ea[2] << 8) | (ea[3]);
+ fecp->fec_addr_high = (ea[4] << 24) | (ea[5] << 16);
#undef ea
/* Clear multicast address hash table
*/
fecp->fec_hash_table_high = 0;
- fecp->fec_hash_table_low = 0;
+ fecp->fec_hash_table_low = 0;
/* Set maximum receive buffer size.
*/
@@ -246,8 +243,8 @@
* Empty, Wrap
*/
for (i = 0; i < PKTBUFSRX; i++) {
- rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
- rtx->rxbd[i].cbd_datlen = 0; /* Reset */
+ rtx->rxbd[i].cbd_sc = BD_ENET_RX_EMPTY;
+ rtx->rxbd[i].cbd_datlen = 0; /* Reset */
rtx->rxbd[i].cbd_bufaddr = (uint) NetRxPackets[i];
}
rtx->rxbd[PKTBUFSRX - 1].cbd_sc |= BD_ENET_RX_WRAP;
@@ -258,8 +255,8 @@
* Last, Tx CRC
*/
for (i = 0; i < TX_BUF_CNT; i++) {
- rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
- rtx->txbd[i].cbd_datlen = 0; /* Reset */
+ rtx->txbd[i].cbd_sc = BD_ENET_TX_LAST | BD_ENET_TX_TC;
+ rtx->txbd[i].cbd_datlen = 0; /* Reset */
rtx->txbd[i].cbd_bufaddr = (uint) (&txbuf[0]);
}
rtx->txbd[TX_BUF_CNT - 1].cbd_sc |= BD_ENET_TX_WRAP;
@@ -273,8 +270,8 @@
*/
/* Half duplex mode */
- fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE<<16) | FEC_RCNTRL_MII_MODE;
- fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE<<16) | FEC_RCNTRL_MII_MODE;
+ fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16) | FEC_RCNTRL_MII_MODE;
+ fecp->fec_r_cntrl = (PKT_MAXBUF_SIZE << 16) | FEC_RCNTRL_MII_MODE;
fecp->fec_x_cntrl = 0;
fecp->fec_mii_speed = 0;
@@ -284,17 +281,16 @@
fecp->fec_ecntrl = FEC_ECNTRL_ETHER_EN;
/* And last, try to fill Rx Buffer Descriptors */
- fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
+ fecp->fec_r_des_active = 0x01000000; /* Descriptor polling active */
return 1;
}
-
-void eth_halt(void)
+void eth_halt (void)
{
volatile fec_t *fecp = FEC_ADDR;
+
fecp->fec_ecntrl = 0;
}
-
#endif
diff --git a/cpu/coldfire/start.S b/cpu/coldfire/start.S
index 7e02661..4454223 100644
--- a/cpu/coldfire/start.S
+++ b/cpu/coldfire/start.S
@@ -14,7 +14,7 @@
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
@@ -26,8 +26,8 @@
#include <config.h>
#include "version.h"
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
+#ifndef CONFIG_IDENT_STRING
+#define CONFIG_IDENT_STRING ""
#endif
#define MCF_MBAR 0x10000000
@@ -38,30 +38,30 @@
.text
- .globl _start
+ .globl _start
_start:
nop
nop
move.w #0x2700,%sr
- move.l #0, %d0
- movec %d0, %VBR
+ move.l #0, %d0
+ movec %d0, %VBR
#ifdef CONFIG_M5272
- move.l #(MCF_MBAR+1), %d0
- move.c %d0, %MBAR
+ move.l #(MCF_MBAR+1), %d0
+ move.c %d0, %MBAR
- move.l #(MEM_BUILTIN_ADDR+1), %d0
- movec %d0, %RAMBAR0
+ move.l #(MEM_BUILTIN_ADDR+1), %d0
+ movec %d0, %RAMBAR0
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0x0000c000, %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
- move.l #0xff00c000, %d0 /* Setup cache mask */
- movec %d0, %ACR1 /* Enable cache */
- move.l #0x80000100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
+ move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0x0000c000, %d0 /* Setup cache mask */
+ movec %d0, %ACR0 /* Enable cache */
+ move.l #0xff00c000, %d0 /* Setup cache mask */
+ movec %d0, %ACR1 /* Enable cache */
+ move.l #0x80000100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
#endif
move.l #_sbss,%a0
@@ -71,8 +71,8 @@
cmp.l %a0,%d0
bne.s 1b
-/* move.l #MEM_BUILTIN_ADDR+MEM_BUILTIN_SIZE, %sp */
- move.l #DRAM_ADDR+DRAM_SIZE, %sp
+/* move.l #MEM_BUILTIN_ADDR+MEM_BUILTIN_SIZE, %sp */
+ move.l #DRAM_ADDR+DRAM_SIZE, %sp
clr.l %sp@-
jsr board_init_f
@@ -107,44 +107,44 @@
lea %sp@(60),%sp
rte
- .globl get_endaddr
+ .globl get_endaddr
get_endaddr:
movel #_end,%d0
rts
#ifdef CONFIG_M5272
- .globl icache_enable
+ .globl icache_enable
icache_enable:
- move.l #0x01000000, %d0 /* Invalidate cache cmd */
- movec %d0, %CACR /* Invalidate cache */
- move.l #0x0000c000, %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
- move.l #0xff00c000, %d0 /* Setup cache mask */
- movec %d0, %ACR1 /* Enable cache */
- move.l #0x80000100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
+ move.l #0x01000000, %d0 /* Invalidate cache cmd */
+ movec %d0, %CACR /* Invalidate cache */
+ move.l #0x0000c000, %d0 /* Setup cache mask */
+ movec %d0, %ACR0 /* Enable cache */
+ move.l #0xff00c000, %d0 /* Setup cache mask */
+ movec %d0, %ACR1 /* Enable cache */
+ move.l #0x80000100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
moveq #1, %d0
move.l %d0, icache_state
rts
- .globl icache_disable
+ .globl icache_disable
icache_disable:
- move.l #0x00000100, %d0 /* Setup cache mask */
- movec %d0, %CACR /* Enable cache */
- clr.l %d0 /* Setup cache mask */
- movec %d0, %ACR0 /* Enable cache */
- movec %d0, %ACR1 /* Enable cache */
+ move.l #0x00000100, %d0 /* Setup cache mask */
+ movec %d0, %CACR /* Enable cache */
+ clr.l %d0 /* Setup cache mask */
+ movec %d0, %ACR0 /* Enable cache */
+ movec %d0, %ACR1 /* Enable cache */
moveq #0, %d0
move.l %d0, icache_state
rts
#endif
#ifdef CONFIG_M5282
- .globl icache_enable
+ .globl icache_enable
icache_enable:
rts
- .globl icache_disable
+ .globl icache_disable
icache_disable:
rts
#endif
@@ -158,7 +158,7 @@
icache_state:
.long 1
- .globl version_string
+ .globl version_string
version_string:
.ascii U_BOOT_VERSION
.ascii " (", __DATE__, " - ", __TIME__, ")"
diff --git a/cpu/mpc5xxx/fec.c b/cpu/mpc5xxx/fec.c
index 74b786d..e48fa88 100644
--- a/cpu/mpc5xxx/fec.c
+++ b/cpu/mpc5xxx/fec.c
@@ -36,6 +36,33 @@
} NBUF;
/********************************************************************/
+#if (DEBUG & 0x2)
+static void mpc5xxx_fec_phydump (void)
+{
+ uint16 phyStatus, i;
+ uint8 phyAddr = CONFIG_PHY_ADDR;
+ uint8 reg_mask[] = {
+#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */
+ /* regs to print: 0...7, 16...19, 21, 23, 24 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0,
+#else
+ /* regs to print: 0...8, 16...20 */
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0,
+ 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+#endif
+ };
+
+ for (i = 0; i < 32; i++) {
+ if (reg_mask[i]) {
+ miiphy_read(phyAddr, i, &phyStatus);
+ printf("Mii reg %d: 0x%04x\n", i, phyStatus);
+ }
+ }
+}
+#endif
+
+/********************************************************************/
static int mpc5xxx_fec_rbd_init(mpc5xxx_fec_priv *fec)
{
int ix;
@@ -211,7 +238,7 @@
DECLARE_GLOBAL_DATA_PTR;
mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv;
struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA;
- const uint8 phyAddr = 0; /* Only one PHY */
+ const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */
#if (DEBUG & 0x1)
printf ("mpc5xxx_fec_init... Begin\n");
@@ -472,21 +499,11 @@
*/
fec->eth->ecntrl |= 0x00000006;
- if (fec->xcv_type != SEVENWIRE) {
#if (DEBUG & 0x2)
- uint16 phyStatus, i;
- uint8 phyAddr = 0;
-
- for (i = 0; i < 9; i++) {
- miiphy_read(phyAddr, i, &phyStatus);
- printf("Mii reg %d: 0x%04x\n", i, phyStatus);
- }
- for (i = 16; i < 21; i++) {
- miiphy_read(phyAddr, i, &phyStatus);
- printf("Mii reg %d: 0x%04x\n", i, phyStatus);
- }
+ if (fec->xcv_type != SEVENWIRE)
+ mpc5xxx_fec_phydump ();
#endif
- }
+
/*
* Enable SmartDMA receive task
*/
@@ -509,22 +526,10 @@
int counter = 0xffff;
#if (DEBUG & 0x2)
- if (fec->xcv_type != SEVENWIRE) {
- uint16 phyStatus, i;
- uint8 phyAddr = 0;
-
- for (i = 0; i < 9; i++) {
- miiphy_read(phyAddr, i, &phyStatus);
- printf("Mii reg %d: 0x%04x\n", i, phyStatus);
- }
- for (i = 16; i < 21; i++) {
- miiphy_read(phyAddr, i, &phyStatus);
- printf ("Mii reg %d: 0x%04x\n", i, phyStatus);
- }
- }
+ if (fec->xcv_type != SEVENWIRE)
+ mpc5xxx_fec_phydump ();
#endif
-
/*
* mask FEC chip interrupts
*/
@@ -587,7 +592,7 @@
static void tfifo_print(mpc5xxx_fec_priv *fec)
{
- uint16 phyAddr = 0;
+ uint16 phyAddr = CONFIG_PHY_ADDR;
uint16 phyStatus;
if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr)
@@ -611,7 +616,7 @@
static void rfifo_print(mpc5xxx_fec_priv *fec)
{
- uint16 phyAddr = 0;
+ uint16 phyAddr = CONFIG_PHY_ADDR;
uint16 phyStatus;
if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr)
@@ -825,12 +830,12 @@
fec->eth = (ethernet_regs *)MPC5XXX_FEC;
fec->tbdBase = (FEC_TBD *)FEC_BD_BASE;
fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD));
-#ifdef CONFIG_ICECUBE
-#ifndef CONFIG_FEC_10MBIT
+#if defined(CONFIG_ICECUBE) || defined(CONFIG_TOP5200)
+# ifndef CONFIG_FEC_10MBIT
fec->xcv_type = MII100;
-#else
+# else
fec->xcv_type = MII10;
-#endif
+# endif
#else
#error fec->xcv_type not initialized.
#endif
diff --git a/cpu/mpc5xxx/start.S b/cpu/mpc5xxx/start.S
index e0873ed..a001e1c 100644
--- a/cpu/mpc5xxx/start.S
+++ b/cpu/mpc5xxx/start.S
@@ -118,18 +118,12 @@
ori r3, r3, 0x02010000@l
stw r3, 0x54(r4)
-#if defined(CFG_LOWBOOT08)
- lis r3, 0xff800160@h
- ori r3, r3, 0xff800160@l
-#endif
-#if defined(CFG_LOWBOOT16)
- lis r3, 0xff000160@h
- ori r3, r3, 0xff000160@l
-#endif
+ lis r3, lowboot_reentry@h
+ ori r3, r3, lowboot_reentry@l
mtlr r3
- blr
-lowboot_reentry: /* FLASH_BASE + 0x160 */
-
+ blr /* jump to flash based address */
+
+lowboot_reentry:
lis r3, 0x0000FF00@h
ori r3, r3, 0x0000FF00@l
stw r3, 0x4c(r4)
@@ -143,7 +137,7 @@
ori r3, r3, 0x02000001@l
stw r3, 0x54(r4)
#endif /* CFG_LOWBOOT */
-
+
#if defined(CFG_DEFAULT_MBAR) && !defined(CFG_RAMBOOT)
lis r3, CFG_MBAR@h
ori r3, r3, CFG_MBAR@l
diff --git a/cpu/mpc8xx/speed.c b/cpu/mpc8xx/speed.c
index 12ef82b..3815537 100644
--- a/cpu/mpc8xx/speed.c
+++ b/cpu/mpc8xx/speed.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -160,7 +160,7 @@
timerp->cpmt_tgcr &= ~(TGCR_RST2 | TGCR_FRZ2 | TGCR_STP2);
immr->im_sit.sit_piscr &= ~PISCR_PTE;
-#ifdef CONFIG_MPC866_et_al
+#if defined(CONFIG_MPC866_et_al)
/* not using OSCM, using XIN, so scale appropriately */
return (((timer2_val + 2) / 4) * (CFG_8XX_XIN/512))/8192 * 100000L;
#else
diff --git a/cpu/ppc4xx/interrupts.c b/cpu/ppc4xx/interrupts.c
index 1a9ae9d..974797f 100644
--- a/cpu/ppc4xx/interrupts.c
+++ b/cpu/ppc4xx/interrupts.c
@@ -92,7 +92,7 @@
/* decrementer is automatically reloaded */
*decrementer_count = 0;
-
+
/*
* Mark all irqs as free
*/
diff --git a/drivers/rtl8019.h b/drivers/rtl8019.h
index b53e142..38116ad 100644
--- a/drivers/rtl8019.h
+++ b/drivers/rtl8019.h
@@ -115,21 +115,3 @@
#endif /*end of CONFIG_DRIVER_RTL8019*/
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
diff --git a/include/asm-m68k/ptrace.h b/include/asm-m68k/ptrace.h
index 343a9f4..8205518 100644
--- a/include/asm-m68k/ptrace.h
+++ b/include/asm-m68k/ptrace.h
@@ -105,4 +105,3 @@
#define PT_FPSCR (PT_FPR0 + 2*32 + 1)
#endif
-
diff --git a/include/asm-m68k/u-boot.h b/include/asm-m68k/u-boot.h
index eaf1de7..b414490 100644
--- a/include/asm-m68k/u-boot.h
+++ b/include/asm-m68k/u-boot.h
@@ -39,9 +39,9 @@
unsigned long bi_sramstart; /* start of SRAM memory */
unsigned long bi_sramsize; /* size of SRAM memory */
unsigned long bi_bootflags; /* boot / reboot flag (for LynxOS) */
- unsigned long bi_boot_params; /* where this board expects params */
+ unsigned long bi_boot_params; /* where this board expects params */
unsigned long bi_ip_addr; /* IP Address */
- unsigned char bi_enetaddr[6]; /* Ethernet adress */
+ unsigned char bi_enetaddr[6]; /* Ethernet adress */
unsigned short bi_ethspeed; /* Ethernet speed in Mbps */
unsigned long bi_intfreq; /* Internal Freq, in MHz */
unsigned long bi_busfreq; /* Bus Freq, in MHz */
@@ -56,11 +56,11 @@
*
* Keep it *SMALL* and remember to set CFG_INIT_DATA_SIZE > sizeof(init_data_t)
*/
-typedef struct init_data {
+typedef struct init_data {
unsigned long cpu_clk; /* VCOOUT = CPU clock in Hz! */
unsigned long env_addr; /* Address of Environment struct */
unsigned long env_valid; /* Checksum of Environment valid? */
- unsigned long relocated; /* Relocat. offset when running in RAM */
+ unsigned long relocated; /* Relocat. offset when running in RAM */
unsigned long have_console; /* serial_init() was called */
#ifdef CONFIG_LCD
unsigned long lcd_base; /* Base address of LCD frambuffer mem */
diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
index 1fd00cc..845dd7c 100644
--- a/include/asm-mips/addrspace.h
+++ b/include/asm-mips/addrspace.h
@@ -14,21 +14,21 @@
/*
* Memory segments (32bit kernel mode addresses)
*/
-#define KUSEG 0x00000000
-#define KSEG0 0x80000000
-#define KSEG1 0xa0000000
-#define KSEG2 0xc0000000
-#define KSEG3 0xe0000000
+#define KUSEG 0x00000000
+#define KSEG0 0x80000000
+#define KSEG1 0xa0000000
+#define KSEG2 0xc0000000
+#define KSEG3 0xe0000000
-#define K0BASE KSEG0
+#define K0BASE KSEG0
/*
* Returns the kernel segment base of a given address
*/
#ifndef __ASSEMBLY__
-#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000)
+#define KSEGX(a) (((unsigned long)(a)) & 0xe0000000)
#else
-#define KSEGX(a) ((a) & 0xe0000000)
+#define KSEGX(a) ((a) & 0xe0000000)
#endif
/*
@@ -40,8 +40,8 @@
#define PHYSADDR(a) ((a) & 0x1fffffff)
#endif
-/*
- * Returns the uncached address of a sdram address
+/*
+ * Returns the uncached address of a sdram address
*/
#ifndef __ASSEMBLY__
#ifdef CONFIG_AU1X00
@@ -49,7 +49,7 @@
cannot access physical memory directly from core */
#define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000)
#else /* !CONFIG_AU1X00 */
-#define UNCACHED_SDRAM(a) PHYSADDR(a)
+#define UNCACHED_SDRAM(a) PHYSADDR(a)
#endif /* CONFIG_AU1X00 */
#endif /* __ASSEMBLY__ */
/*
@@ -70,13 +70,13 @@
/*
* Memory segments (64bit kernel mode addresses)
*/
-#define XKUSEG 0x0000000000000000
-#define XKSSEG 0x4000000000000000
-#define XKPHYS 0x8000000000000000
-#define XKSEG 0xc000000000000000
-#define CKSEG0 0xffffffff80000000
-#define CKSEG1 0xffffffffa0000000
-#define CKSSEG 0xffffffffc0000000
-#define CKSEG3 0xffffffffe0000000
+#define XKUSEG 0x0000000000000000
+#define XKSSEG 0x4000000000000000
+#define XKPHYS 0x8000000000000000
+#define XKSEG 0xc000000000000000
+#define CKSEG0 0xffffffff80000000
+#define CKSEG1 0xffffffffa0000000
+#define CKSSEG 0xffffffffc0000000
+#define CKSEG3 0xffffffffe0000000
#endif /* __ASM_MIPS_ADDRSPACE_H */
diff --git a/include/common.h b/include/common.h
index ece5d64..73a5a2e 100644
--- a/include/common.h
+++ b/include/common.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -49,11 +49,11 @@
#ifdef CONFIG_MPC860T
#define CONFIG_MPC86x 1
#endif
-#if defined(CONFIG_MPC866P) || \
- defined(CONFIG_MPC866T) || \
- defined(CONFIG_MPC859T) || \
- defined(CONFIG_MPC859DSL) || \
- defined(CONFIG_MPC852T)
+#if defined(CONFIG_MPC852) || defined(CONFIG_MPC852T) || \
+ defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \
+ defined(CONFIG_MPC859DSL) || \
+ defined(CONFIG_MPC866) || defined(CONFIG_MPC866T) || \
+ defined(CONFIG_MPC866P)
#define CONFIG_MPC866_et_al 1
#define CONFIG_MPC86x 1
#endif
@@ -100,7 +100,7 @@
*/
#if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \
defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \
- defined(CONFIG_TQM862M)
+ defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M)
# ifndef CONFIG_TQM8xxM
# define CONFIG_TQM8xxM
# endif
diff --git a/include/commproc.h b/include/commproc.h
index 3da804f..8bab522 100644
--- a/include/commproc.h
+++ b/include/commproc.h
@@ -2,6 +2,9 @@
* MPC8xx Communication Processor Module.
* Copyright (c) 1997 Dan Malek (dmalek@jlc.net)
*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
* This file contains structures and information for the communication
* processor channels. Some CPM control and status is available
* throught the MPC8xx internal memory map. See immap.h for details.
@@ -1430,11 +1433,12 @@
#define SICR_ENET_CLKRT ((uint)0x00002600)
#endif /* CONFIG_MVS v1, CONFIG_TQM823L/M, CONFIG_TQM850L/M, etc. */
-/*** TQM855L/M, TQM860L/M, TQM862L/M ********************************/
+/*** TQM855L/M, TQM860L/M, TQM862L/M, TQM866L/M *********************/
#if defined(CONFIG_TQM855L) || defined(CONFIG_TQM855M) || \
defined(CONFIG_TQM860L) || defined(CONFIG_TQM860M) || \
- defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M)
+ defined(CONFIG_TQM862L) || defined(CONFIG_TQM862M) || \
+ defined(CONFIG_TQM866L) || defined(CONFIG_TQM866M)
# ifdef CONFIG_SCC1_ENET /* use SCC for 10Mbps Ethernet */
diff --git a/include/configs/IceCube.h b/include/configs/IceCube.h
index 2f0a875..194f62f 100644
--- a/include/configs/IceCube.h
+++ b/include/configs/IceCube.h
@@ -215,6 +215,7 @@
*/
#define CONFIG_MPC5XXX_FEC 1
#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */
+#define CONFIG_PHY_ADDR 0x00
/*
* GPIO configuration
diff --git a/include/configs/MVBLUE.h b/include/configs/MVBLUE.h
index 6965e1c..32f9e91 100644
--- a/include/configs/MVBLUE.h
+++ b/include/configs/MVBLUE.h
@@ -53,7 +53,7 @@
#define ERR_LED(code)
#endif
-#undef DEBUG
+#undef DEBUG
#define CONFIG_MPC824X 1
#define CONFIG_MPC8245 1
@@ -71,14 +71,14 @@
#define CONFIG_BOOT_RETRY_TIME -1
#define CONFIG_AUTOBOOT_KEYED
-#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n\0"
-#define CONFIG_AUTOBOOT_STOP_STR "s\0"
+#define CONFIG_AUTOBOOT_PROMPT "autoboot in %d seconds (stop with 's')...\n"
+#define CONFIG_AUTOBOOT_STOP_STR "s"
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_RESET_TO_RETRY 60
#define CONFIG_COMMANDS ( CFG_CMD_ASKENV | CFG_CMD_BOOTD | CFG_CMD_CACHE | CFG_CMD_DHCP | \
- CFG_CMD_ECHO | CFG_CMD_ENV | CFG_CMD_FLASH | CFG_CMD_IMI | \
- CFG_CMD_IRQ | CFG_CMD_NET | CFG_CMD_PCI | CFG_CMD_RUN )
+ CFG_CMD_ECHO | CFG_CMD_ENV | CFG_CMD_FLASH | CFG_CMD_IMI | \
+ CFG_CMD_IRQ | CFG_CMD_NET | CFG_CMD_PCI | CFG_CMD_RUN )
#define CONFIG_BOOTP_MASK ( 0xffffffff )
@@ -103,19 +103,19 @@
#define CONFIG_NFSBOOTCOMMAND "bootp; run nfsargs addcons;bootm"
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "console_nr=0\0" \
- "dhcp_client_id=mvBOX-XP\0" \
- "dhcp_vendor-class-identifier=mvBOX\0" \
- "adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0" \
- "flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \
- "safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \
- "hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
- "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \
- "addcons=setenv bootargs $(bootargs) console=ttyS$(console_nr),$(baudrate)N8\0" \
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "console_nr=0\0" \
+ "dhcp_client_id=mvBOX-XP\0" \
+ "dhcp_vendor-class-identifier=mvBOX\0" \
+ "adminboot=setenv bootargs root=/dev/mtdblock5 rw rootfstype=jffs2;run addcons;bootm ffc00000\0" \
+ "flashboot=setenv bootargs root=/dev/mtdblock5 ro rootfstype=jffs2;run addcons;bootm ffc00000\0" \
+ "safeboot=setenv bootargs root=/dev/mtdblock2 rw rootfstype=cramfs;run addcons;bootm ffc00000\0" \
+ "hdboot=setenv bootargs root=/dev/hda1;run addcons;bootm ffc00000\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=$(serverip):$(rootpath) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask):$(hostname)::off\0" \
+ "addcons=setenv bootargs $(bootargs) console=ttyS$(console_nr),$(baudrate)N8\0" \
"mv_version=" MV_VERSION "\0" \
- "bootretry=30\0"
+ "bootretry=30\0"
#define CONFIG_OVERWRITE_ETHADDR_ONCE
@@ -124,11 +124,11 @@
*-----------------------------------------------------------------------
*/
-#define CONFIG_PCI
+#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI
#define CONFIG_NET_RETRY_COUNT 5
#define CONFIG_TULIP
@@ -144,8 +144,8 @@
*/
#define CFG_SDRAM_BASE 0x00000000
-#define CFG_FLASH_BASE 0xFFF00000
-#define CFG_MONITOR_BASE TEXT_BASE
+#define CFG_FLASH_BASE 0xFFF00000
+#define CFG_MONITOR_BASE TEXT_BASE
#define CFG_RESET_ADDRESS 0xFFF00100
#define CFG_EUMB_ADDR 0xFC000000
@@ -196,7 +196,7 @@
* For the detail description refer to the MPC8240 user's manual.
*/
-#define CONFIG_SYS_CLK_FREQ 33000000
+#define CONFIG_SYS_CLK_FREQ 33000000
#define CFG_HZ 10000
/* Bit-field values for MCCR1. */
@@ -205,17 +205,17 @@
/* Bit-field values for MCCR2. */
#define CFG_TSWAIT 0x5
-#define CFG_REFINT 430
+#define CFG_REFINT 430
/* Burst To Precharge. Bits of this value go to MCCR3 and MCCR4. */
-#define CFG_BSTOPRE 121
+#define CFG_BSTOPRE 121
/* Bit-field values for MCCR3. */
#define CFG_REFREC 8
/* Bit-field values for MCCR4. */
-#define CFG_PRETOACT 3
-#define CFG_ACTTOPRE 5
+#define CFG_PRETOACT 3
+#define CFG_ACTTOPRE 5
#define CFG_ACTORW 3
#define CFG_SDMODE_CAS_LAT 3
#define CFG_REGISTERD_TYPE_BUFFER 1
@@ -292,7 +292,7 @@
/*-----------------------------------------------------------------------
* FLASH organization
*/
-#undef CFG_FLASH_PROTECTION
+#undef CFG_FLASH_PROTECTION
#define CFG_MAX_FLASH_BANKS 1 /* Max number of flash banks */
#define CFG_MAX_FLASH_SECT 63 /* Max number of sectors per flash */
@@ -300,11 +300,11 @@
#define CFG_FLASH_WRITE_TOUT 1000
-#define CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_IS_IN_FLASH
#define CFG_ENV_OFFSET 0x00010000
-#define CFG_ENV_SIZE 0x00010000
-#define CFG_ENV_SECT_SIZE 0x00010000
+#define CFG_ENV_SIZE 0x00010000
+#define CFG_ENV_SECT_SIZE 0x00010000
/*-----------------------------------------------------------------------
* Cache Configuration
diff --git a/include/configs/QS860T.h b/include/configs/QS860T.h
index 92eccd3..8d29a31 100644
--- a/include/configs/QS860T.h
+++ b/include/configs/QS860T.h
@@ -47,7 +47,6 @@
#define CONFIG_ENV_OVERWRITE 1 /* allow overwrite MAC address */
-
/*
* High Level Configuration Options
* (easy to change)
@@ -368,7 +367,6 @@
/* #define CFG_BR5 0xE4000000 */
-
/*
* BR6 and OR6 (Expansion bus)
* Base address = 0xE800_0000 - 0xEBFF_FFFF
@@ -381,7 +379,6 @@
/* #define CFG_BR6 0xE8000000 */
-
/*
* BR7 and OR7 (Expansion bus)
* Base address = 0xEC00_0000 - 0xEFFF_FFFF
@@ -394,7 +391,6 @@
/* #define CFG_BR7 0xE8000000 */
-
/*
* Internal Definitions
*
diff --git a/include/configs/TOP5200.h b/include/configs/TOP5200.h
index 21daa2d..624beed 100644
--- a/include/configs/TOP5200.h
+++ b/include/configs/TOP5200.h
@@ -1,16 +1,17 @@
/*
* (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * modified for TOP5200 by Reinhard Meyer, www.emk-elektronik.de
- * TOP5200 differences from IceCube:
- * 1 FLASH Bank for one Chip only, up to 64 MB in 16 MB Banks
- * bank switch controlled by TIMER_6(LSB) and TIMER_7(MSB) Pins
- * 1 SDRAM/DDRAM Bank up to 256 MB
- * local VPD I2C Bus is software driven and uses
- * GPIO_WKUP_6 for SDA, GPIO_WKUP_7 for SCL
- * FLASH is located at 0x80000000
- * Internal regs are at 0xfff00000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * modified for TOP5200-series by Reinhard Meyer, www.emk-elektronik.de
+ *
+ * TOP5200 differences from IceCube:
+ * 1 FLASH Bank for one Chip only, up to 64 MB in 16 MB Banks
+ * bank switch controlled by TIMER_6(LSB) and TIMER_7(MSB) Pins
+ * 1 SDRAM/DDRAM Bank up to 256 MB
+ * local VPD I2C Bus is software driven and uses
+ * GPIO_WKUP_6 for SDA, GPIO_WKUP_7 for SCL
+ * FLASH is re-located at 0xff000000
+ * Internal regs are at 0xf0000000
* Reset jumps to 0x00000100
*
* See file CREDITS for list of people who contributed to this
@@ -44,7 +45,7 @@
#define CONFIG_MPC5200 1 /* More exactly a MPC5200 */
#define CONFIG_TOP5200 1 /* ... on TOP5200 board - we need this for FEC.C */
-#define CFG_MPC5XXX_CLKIN 33333333 /* ... running at 33MHz */
+#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
@@ -98,17 +99,48 @@
#include <cmd_confdefs.h>
/*
+ * low boot
+ */
+#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
+# define CFG_LOWBOOT 1
+# define CFG_LOWBOOT16 1
+#endif
+
+/*
* Autobooting
*/
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#define CONFIG_BOOTCOMMAND "bootm 100000" /* autoboot command */
-#define CONFIG_BOOTARGS "root=/dev/ram rw"
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk/ppc_82xx\0" \
+ "bootfile=/tftpboot/MPC5200/uImage\0" \
+ ""
+
+#define CONFIG_BOOTCOMMAND "run flash_self"
/*
* IPB Bus clocking configuration.
*/
#undef CFG_IPBSPEED_133 /* define for 133MHz speed */
-
+
/*
* I2C configuration
*/
@@ -120,21 +152,21 @@
#define CFG_I2C_EEPROM_ADDR_LEN 2
#define CFG_EEPROM_SIZE 0x2000
-
+
#define CONFIG_ENV_OVERWRITE
#define CONFIG_MISC_INIT_R
-
+
#undef CONFIG_HARD_I2C /* I2C with hardware support */
#define CONFIG_SOFT_I2C 1
-
+
#if defined (CONFIG_SOFT_I2C)
# define SDA0 0x40
# define SCL0 0x80
-# define GPIOE0 *((volatile uchar*)(CFG_MBAR+0x0c00))
-# define DDR0 *((volatile uchar*)(CFG_MBAR+0x0c08))
-# define DVO0 *((volatile uchar*)(CFG_MBAR+0x0c0c))
-# define DVI0 *((volatile uchar*)(CFG_MBAR+0x0c20))
-# define ODE0 *((volatile uchar*)(CFG_MBAR+0x0c04))
+# define GPIOE0 *((volatile uchar*)(CFG_MBAR+0x0c00))
+# define DDR0 *((volatile uchar*)(CFG_MBAR+0x0c08))
+# define DVO0 *((volatile uchar*)(CFG_MBAR+0x0c0c))
+# define DVI0 *((volatile uchar*)(CFG_MBAR+0x0c20))
+# define ODE0 *((volatile uchar*)(CFG_MBAR+0x0c04))
# define I2C_INIT {GPIOE0|=(SDA0|SCL0);ODE0|=(SDA0|SCL0);DVO0|=(SDA0|SCL0);DDR0|=(SDA0|SCL0);}
# define I2C_READ ((DVI0&SDA0)?1:0)
# define I2C_SDA(x) {if(x)DVO0|=SDA0;else DVO0&=~SDA0;}
@@ -145,12 +177,12 @@
# define CFG_I2C_SPEED 100000
# define CFG_I2C_SLAVE 0x7F
#endif
-
-#if defined (CONFIG_HARD_I2C)
+
+#if defined (CONFIG_HARD_I2C)
# define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */
# define CFG_I2C_SPEED 100000 /* 100 kHz */
# define CFG_I2C_SLAVE 0x7F
-#endif
+#endif
/*
* Flash configuration, expect one 16 Megabyte Bank at most
@@ -158,7 +190,7 @@
#define CFG_FLASH_BASE 0xff000000
#define CFG_FLASH_SIZE 0x01000000
#define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */
-#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0)
+#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0)
#define CFG_MAX_FLASH_SECT 256 /* max num of sects on one chip */
@@ -167,32 +199,32 @@
#undef CONFIG_FLASH_16BIT /* Flash is 8-bit */
-/*
- * DRAM configuration - will be read from VPD later... TODO!
- */
-#if 0
-/* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */
-#define CFG_DRAM_DDR 0
-#define CFG_DRAM_EMODE 0
-#define CFG_DRAM_MODE 0x008D
-#define CFG_DRAM_CONTROL 0x514F0000
-#define CFG_DRAM_CONFIG1 0xC2233A00
-#define CFG_DRAM_CONFIG2 0x88B70004
-#define CFG_DRAM_TAP_DEL 0x08
-#define CFG_DRAM_RAM_SIZE 0x19
-#endif
-#if 1
-/* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */
-#define CFG_DRAM_DDR 0
-#define CFG_DRAM_EMODE 0
-#define CFG_DRAM_MODE 0x00CD
-#define CFG_DRAM_CONTROL 0x514F0000
-#define CFG_DRAM_CONFIG1 0xD2333A00
-#define CFG_DRAM_CONFIG2 0x8AD70004
-#define CFG_DRAM_TAP_DEL 0x08
-#define CFG_DRAM_RAM_SIZE 0x19
-#endif
-
+/*
+ * DRAM configuration - will be read from VPD later... TODO!
+ */
+#if 0
+/* 2x MT48LC16M16A2 - 7.0 ns SDRAMS = 64 MegaBytes Total */
+#define CFG_DRAM_DDR 0
+#define CFG_DRAM_EMODE 0
+#define CFG_DRAM_MODE 0x008D
+#define CFG_DRAM_CONTROL 0x514F0000
+#define CFG_DRAM_CONFIG1 0xC2233A00
+#define CFG_DRAM_CONFIG2 0x88B70004
+#define CFG_DRAM_TAP_DEL 0x08
+#define CFG_DRAM_RAM_SIZE 0x19
+#endif
+#if 1
+/* 2x MT48LC16M16A2 - 7.5 ns SDRAMS = 64 MegaBytes Total */
+#define CFG_DRAM_DDR 0
+#define CFG_DRAM_EMODE 0
+#define CFG_DRAM_MODE 0x00CD
+#define CFG_DRAM_CONTROL 0x514F0000
+#define CFG_DRAM_CONFIG1 0xD2333A00
+#define CFG_DRAM_CONFIG2 0x8AD70004
+#define CFG_DRAM_TAP_DEL 0x08
+#define CFG_DRAM_RAM_SIZE 0x19
+#endif
+
/*
* Environment settings
*/
@@ -201,17 +233,17 @@
#define CFG_ENV_SIZE 0x0700
#define CFG_I2C_EEPROM_ADDR 0x57
-/*
- * VPD settings
- */
+/*
+ * VPD settings
+ */
#define CFG_FACT_OFFSET 0x1800
#define CFG_FACT_SIZE 0x0800
#define CFG_I2C_FACT_ADDR 0x57
-
+
/*
- * Memory map
- *
- * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000
+ * Memory map
+ *
+ * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000
*/
#define CFG_MBAR 0xf0000000 /* DO NOT CHANGE this */
#define CFG_SDRAM_BASE 0x00000000
@@ -240,12 +272,12 @@
*/
#define CONFIG_MPC5XXX_FEC 1
#define CONFIG_FEC_10MBIT 1 /* Workaround for FEC 100Mbit problem */
-#define CONFIG_PHY_ADDR 0x1f
+#define CONFIG_PHY_ADDR 0x1f
#define CONFIG_PHY_TYPE 0x79c874
/*
- * GPIO configuration:
- * PSC1,2,3 predefined as UART
- * PCI disabled
+ * GPIO configuration:
+ * PSC1,2,3 predefined as UART
+ * PCI disabled
* Ethernet 100 with MD
*/
#define CFG_GPS_PORT_CONFIG 0x00058444
diff --git a/include/configs/TQM855M.h b/include/configs/TQM855M.h
index e926d93..cb4a16a 100644
--- a/include/configs/TQM855M.h
+++ b/include/configs/TQM855M.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2003
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -83,6 +83,39 @@
#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
+/* enable I2C and select the hardware/software driver */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+
+#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */
+#define CFG_I2C_SLAVE 0xFE
+
+#ifdef CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PB_SCL 0x00000020 /* PB 26 */
+#define PB_SDA 0x00000010 /* PB 27 */
+
+#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
+#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
+#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C64 */
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
+#if 0
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* takes up to 10 msec */
+#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x01
+#define CFG_EEPROM_PAGE_WRITE_BITS 5
+#endif
+
#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
#define CONFIG_MAC_PARTITION
@@ -93,6 +126,7 @@
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
CFG_CMD_ASKENV | \
CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
CFG_CMD_IDE | \
CFG_CMD_DATE )
diff --git a/include/configs/TQM866M.h b/include/configs/TQM866M.h
new file mode 100644
index 0000000..0219836
--- /dev/null
+++ b/include/configs/TQM866M.h
@@ -0,0 +1,526 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * board/config.h - configuration options, board specific
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ * (easy to change)
+ */
+
+#define CONFIG_MPC866 1 /* This is a MPC866 CPU */
+#define CONFIG_TQM866M 1 /* ...on a TQM8xxM module */
+
+#define CFG_8XX_XIN 10000000 /* XXX XXX XXX */
+
+#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
+#undef CONFIG_8xx_CONS_SMC2
+#undef CONFIG_8xx_CONS_NONE
+
+#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
+
+#define CONFIG_BOOTCOUNT_LIMIT
+
+#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
+
+#define CONFIG_BOARD_TYPES 1 /* support board types */
+
+#define CONFIG_PREBOOT "echo;" \
+ "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+ "echo"
+
+#undef CONFIG_BOOTARGS
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "netdev=eth0\0" \
+ "nfsargs=setenv bootargs root=/dev/nfs rw " \
+ "nfsroot=$(serverip):$(rootpath)\0" \
+ "ramargs=setenv bootargs root=/dev/ram rw\0" \
+ "addip=setenv bootargs $(bootargs) " \
+ "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \
+ ":$(hostname):$(netdev):off panic=1\0" \
+ "flash_nfs=run nfsargs addip;" \
+ "bootm $(kernel_addr)\0" \
+ "flash_self=run ramargs addip;" \
+ "bootm $(kernel_addr) $(ramdisk_addr)\0" \
+ "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \
+ "rootpath=/opt/eldk/ppc_8xx\0" \
+ "bootfile=/tftpboot/TQM855M/uImage\0" \
+ "kernel_addr=40080000\0" \
+ "ramdisk_addr=40180000\0" \
+ ""
+#define CONFIG_BOOTCOMMAND "run flash_self"
+
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#undef CFG_LOADS_BAUD_CHANGE /* don't allow baudrate change */
+
+#undef CONFIG_WATCHDOG /* watchdog disabled */
+
+#define CONFIG_STATUS_LED 1 /* Status LED enabled */
+
+#undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */
+
+/* enable I2C and select the hardware/software driver */
+#undef CONFIG_HARD_I2C /* I2C with hardware support */
+#define CONFIG_SOFT_I2C 1 /* I2C bit-banged */
+
+#define CFG_I2C_SPEED 93000 /* 93 kHz is supposed to work */
+#define CFG_I2C_SLAVE 0xFE
+
+#ifdef CONFIG_SOFT_I2C
+/*
+ * Software (bit-bang) I2C driver configuration
+ */
+#define PB_SCL 0x00000020 /* PB 26 */
+#define PB_SDA 0x00000010 /* PB 27 */
+
+#define I2C_INIT (immr->im_cpm.cp_pbdir |= PB_SCL)
+#define I2C_ACTIVE (immr->im_cpm.cp_pbdir |= PB_SDA)
+#define I2C_TRISTATE (immr->im_cpm.cp_pbdir &= ~PB_SDA)
+#define I2C_READ ((immr->im_cpm.cp_pbdat & PB_SDA) != 0)
+#define I2C_SDA(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SDA; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SDA
+#define I2C_SCL(bit) if(bit) immr->im_cpm.cp_pbdat |= PB_SCL; \
+ else immr->im_cpm.cp_pbdat &= ~PB_SCL
+#define I2C_DELAY udelay(2) /* 1/4 I2C clock duration */
+#endif /* CONFIG_SOFT_I2C */
+
+#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM AT24C256 */
+#define CFG_I2C_EEPROM_ADDR_LEN 2 /* two byte address */
+#define CFG_EEPROM_PAGE_WRITE_BITS 4
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAULT | CONFIG_BOOTP_BOOTFILESIZE)
+
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+
+#define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */
+
+#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
+ CFG_CMD_ASKENV | \
+ CFG_CMD_DHCP | \
+ CFG_CMD_EEPROM | \
+ CFG_CMD_IDE | \
+ CFG_CMD_I2C | \
+ CFG_CMD_DATE )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP /* undef to save memory */
+#define CFG_PROMPT "=> " /* Monitor Command Prompt */
+
+#if 0
+#define CFG_HUSH_PARSER 1 /* use "hush" command parser */
+#endif
+#ifdef CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
+#else
+#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS 16 /* max number of command args */
+#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
+
+#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
+#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
+
+#define CFG_LOAD_ADDR 0x100000 /* default load address */
+
+#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
+
+#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+/*
+ * Low Level Configuration Settings
+ * (address mappings, register initial values, etc.)
+ * You should know what you are doing if you make changes here.
+ */
+/*-----------------------------------------------------------------------
+ * Internal Memory Mapped Register
+ */
+#define CFG_IMMR 0xFFF00000
+
+/*-----------------------------------------------------------------------
+ * Definitions for initial stack pointer and data area (in DPRAM)
+ */
+#define CFG_INIT_RAM_ADDR CFG_IMMR
+#define CFG_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */
+#define CFG_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */
+#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
+
+/*-----------------------------------------------------------------------
+ * Start addresses for the final memory configuration
+ * (Set up by the startup code)
+ * Please note that CFG_SDRAM_BASE _must_ start at 0
+ */
+#define CFG_SDRAM_BASE 0x00000000
+#define CFG_FLASH_BASE 0x40000000
+#define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
+#define CFG_MONITOR_BASE CFG_FLASH_BASE
+#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
+
+/*-----------------------------------------------------------------------
+ * FLASH organization
+ */
+#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
+#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
+
+#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
+#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
+
+#define CFG_ENV_IS_IN_FLASH 1
+#define CFG_ENV_OFFSET 0x40000 /* Offset of Environment Sector */
+#define CFG_ENV_SIZE 0x08000 /* Total Size of Environment Sector */
+#define CFG_ENV_SECT_SIZE 0x20000 /* Total Size of Environment Sector */
+
+/* Address and size of Redundant Environment Sector */
+#define CFG_ENV_OFFSET_REDUND (CFG_ENV_OFFSET+CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE)
+
+/*-----------------------------------------------------------------------
+ * Hardware Information Block
+ */
+#define CFG_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */
+#define CFG_HWINFO_SIZE 0x00000040 /* size of HW Info block */
+#define CFG_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT 4 /* log base 2 of the above value */
+#endif
+
+/*-----------------------------------------------------------------------
+ * SYPCR - System Protection Control 11-9
+ * SYPCR can only be written once after reset!
+ *-----------------------------------------------------------------------
+ * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze
+ */
+#if defined(CONFIG_WATCHDOG)
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \
+ SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP)
+#else
+#define CFG_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP)
+#endif
+
+/*-----------------------------------------------------------------------
+ * SIUMCR - SIU Module Configuration 11-6
+ *-----------------------------------------------------------------------
+ * PCMCIA config., multi-function pin tri-state
+ */
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#else /* we must activate GPL5 in the SIUMCR for CAN */
+#define CFG_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01)
+#endif /* CONFIG_CAN_DRIVER */
+
+/*-----------------------------------------------------------------------
+ * TBSCR - Time Base Status and Control 11-26
+ *-----------------------------------------------------------------------
+ * Clear Reference Interrupt Status, Timebase freezing enabled
+ */
+#define CFG_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF)
+
+/*-----------------------------------------------------------------------
+ * RTCSC - Real-Time Clock Status and Control Register 11-27
+ *-----------------------------------------------------------------------
+ */
+#define CFG_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE)
+
+/*-----------------------------------------------------------------------
+ * PISCR - Periodic Interrupt Status and Control 11-31
+ *-----------------------------------------------------------------------
+ * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled
+ */
+#define CFG_PISCR (PISCR_PS | PISCR_PITF)
+
+/*-----------------------------------------------------------------------
+ * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
+ *-----------------------------------------------------------------------
+ * Reset PLL lock status sticky bit, timer expired status bit and timer
+ * interrupt status bit
+ *
+ * set PLL multiplication factor
+ */
+#if defined(CONFIG_133MHz)
+ /* for 133 MHz, we use a 10 MHz clock:
+ * MFN = 0x09, MFD = 0x1D, S = 0, MFI = 13
+ */
+#define CFG_PLPRCR \
+ ( 9 << PLPRCR_MFN_SHIFT | 0x1D << PLPRCR_MFD_SHIFT | \
+ 0 << PLPRCR_S_SHIFT | 0x0D << PLPRCR_MFI_SHIFT | \
+ PLPRCR_TEXPS )
+#elif defined(CONFIG_80MHz) /* for 80 MHz, we use a 16 MHz clock * 5 */
+#define CFG_PLPRCR \
+ ( (5-1)<<PLPRCR_MFI_SHIFT | PLPRCR_TEXPS )
+#else /* up to 66 MHz we use a 1:1 clock */
+#define CFG_PLPRCR ( PLPRCR_SPLSS | PLPRCR_TEXPS )
+#endif /* CONFIG_??MHz */
+
+/*-----------------------------------------------------------------------
+ * SCCR - System Clock and reset Control Register 15-27
+ *-----------------------------------------------------------------------
+ * Set clock output, timebase and RTC source and divider,
+ * power management and some other internal clocks
+ */
+#define SCCR_MASK SCCR_EBDF11
+#if defined(CONFIG_133MHz) /* for 133 MHz, we use a 10 MHz clock * 13 */
+#define CFG_SCCR (/* SCCR_TBS | */ \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00)
+#elif defined(CONFIG_80MHz) /* for 80 MHz, we use a 16 MHz clock * 5 */
+#define CFG_SCCR (/* SCCR_TBS | */ \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00)
+#else /* up to 66 MHz we use a 1:1 clock */
+#define CFG_SCCR (SCCR_TBS | \
+ SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \
+ SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \
+ SCCR_DFALCD00)
+#endif /* CONFIG_??MHz */
+
+/*-----------------------------------------------------------------------
+ * PCMCIA stuff
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_PCMCIA_MEM_ADDR (0xE0000000)
+#define CFG_PCMCIA_MEM_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_DMA_ADDR (0xE4000000)
+#define CFG_PCMCIA_DMA_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_ATTRB_ADDR (0xE8000000)
+#define CFG_PCMCIA_ATTRB_SIZE ( 64 << 20 )
+#define CFG_PCMCIA_IO_ADDR (0xEC000000)
+#define CFG_PCMCIA_IO_SIZE ( 64 << 20 )
+
+/*-----------------------------------------------------------------------
+ * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter)
+ *-----------------------------------------------------------------------
+ */
+
+#define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */
+
+#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
+#undef CONFIG_IDE_LED /* LED for ide not supported */
+#undef CONFIG_IDE_RESET /* reset for ide not supported */
+
+#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
+#define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */
+
+#define CFG_ATA_IDE0_OFFSET 0x0000
+
+#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
+
+/* Offset for data I/O */
+#define CFG_ATA_DATA_OFFSET (CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for normal register accesses */
+#define CFG_ATA_REG_OFFSET (2 * CFG_PCMCIA_MEM_SIZE + 0x320)
+
+/* Offset for alternate registers */
+#define CFG_ATA_ALT_OFFSET 0x0100
+
+/*-----------------------------------------------------------------------
+ *
+ *-----------------------------------------------------------------------
+ *
+ */
+#define CFG_DER 0
+
+/*
+ * Init Memory Controller:
+ *
+ * BR0/1 and OR0/1 (FLASH)
+ */
+
+#define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */
+#define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */
+
+/* used to re-map FLASH both when starting from SRAM or FLASH:
+ * restrict access enough to keep SRAM working (if any)
+ * but not too much to meddle with FLASH accesses
+ */
+#define CFG_REMAP_OR_AM 0x80000000 /* OR addr mask */
+#define CFG_PRELIM_OR_AM 0xE0000000 /* OR addr mask */
+
+/*
+ * FLASH timing:
+ */
+#if defined(CONFIG_133MHz)
+/* 133 MHz CPU - 66 MHz bus: */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
+ OR_SCY_3_CLK | OR_EHTR | OR_BI)
+#elif defined(CONFIG_100MHz)
+/* 100 MHz CPU - 50 MHz bus: */
+#elif defined(CONFIG_80MHz)
+/* 80 MHz CPU - 40 MHz bus: ACS = 00, TRLX = 0, CSNT = 1, SCY = 3, EHTR = 1 */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | 0 | OR_CSNT_SAM | \
+ OR_SCY_3_CLK | OR_EHTR | OR_BI)
+#elif defined(CONFIG_66MHz)
+/* 66 MHz CPU - 66 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 3, EHTR = 1 */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
+ OR_SCY_3_CLK | OR_EHTR | OR_BI)
+#else /* 50 MHz */
+/* 50 MHz CPU - 50 MHz bus: ACS = 00, TRLX = 1, CSNT = 1, SCY = 2, EHTR = 1 */
+#define CFG_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \
+ OR_SCY_2_CLK | OR_EHTR | OR_BI)
+#endif /*CONFIG_??MHz */
+
+#define CFG_OR0_REMAP (CFG_REMAP_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH)
+#define CFG_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V )
+
+#define CFG_OR1_REMAP CFG_OR0_REMAP
+#define CFG_OR1_PRELIM CFG_OR0_PRELIM
+#define CFG_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V )
+
+/*
+ * BR2/3 and OR2/3 (SDRAM)
+ *
+ */
+#define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */
+#define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */
+#define SDRAM_MAX_SIZE (256 << 20) /* max 256 MB per bank */
+
+/* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */
+#define CFG_OR_TIMING_SDRAM 0x00000A00
+
+#define CFG_OR2_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_SDRAM )
+#define CFG_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+
+#ifndef CONFIG_CAN_DRIVER
+#define CFG_OR3_PRELIM CFG_OR2_PRELIM
+#define CFG_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V )
+#else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */
+#define CFG_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */
+#define CFG_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */
+#define CFG_OR3_CAN (CFG_CAN_OR_AM | OR_G5LA | OR_BI)
+#define CFG_BR3_CAN ((CFG_CAN_BASE & BR_BA_MSK) | \
+ BR_PS_8 | BR_MS_UPMB | BR_V )
+#endif /* CONFIG_CAN_DRIVER */
+
+/*
+ * Memory Periodic Timer Prescaler
+ *
+ * The Divider for PTA (refresh timer) configuration is based on an
+ * example SDRAM configuration (64 MBit, one bank). The adjustment to
+ * the number of chip selects (NCS) and the actually needed refresh
+ * rate is done by setting MPTPR.
+ *
+ * PTA is calculated from
+ * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS)
+ *
+ * gclk CPU clock (not bus clock!)
+ * Trefresh Refresh cycle * 4 (four word bursts used)
+ *
+ * 4096 Rows from SDRAM example configuration
+ * 1000 factor s -> ms
+ * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration
+ * 4 Number of refresh cycles per period
+ * 64 Refresh cycle in ms per number of rows
+ * --------------------------------------------
+ * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000
+ *
+ * 50 MHz => 50.000.000 / Divider = 98
+ * 66 Mhz => 66.000.000 / Divider = 129
+ * 80 Mhz => 80.000.000 / Divider = 156
+ */
+#if defined(CONFIG_133MHz)
+#define CFG_MAMR_PTA 129
+#elif defined(CONFIG_100MHz)
+#define CFG_MAMR_PTA 98
+#elif defined(CONFIG_80MHz)
+#define CFG_MAMR_PTA 156
+#elif defined(CONFIG_66MHz)
+#define CFG_MAMR_PTA 129
+#else /* 50 MHz */
+#define CFG_MAMR_PTA 98
+#endif /*CONFIG_??MHz */
+
+/*
+ * For 16 MBit, refresh rates could be 31.3 us
+ * (= 64 ms / 2K = 125 / quad bursts).
+ * For a simpler initialization, 15.6 us is used instead.
+ *
+ * #define CFG_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks
+ * #define CFG_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank
+ */
+#define CFG_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */
+
+/* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */
+#define CFG_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */
+#define CFG_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */
+
+/*
+ * MAMR settings for SDRAM
+ */
+
+/* 8 column SDRAM */
+#define CFG_MAMR_8COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+/* 9 column SDRAM */
+#define CFG_MAMR_9COL ((CFG_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \
+ MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \
+ MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X)
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM 0x02 /* Software reboot */
+
+#define CONFIG_SCC1_ENET
+#define CONFIG_FEC_ENET
+#define CONFIG_ETHPRIME "SCC ETHERNET"
+
+#endif /* __CONFIG_H */
diff --git a/include/configs/dbau1x00.h b/include/configs/dbau1x00.h
index 6f647f2..d78b727 100644
--- a/include/configs/dbau1x00.h
+++ b/include/configs/dbau1x00.h
@@ -30,24 +30,24 @@
#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
#define CONFIG_DBAU1X00 1
-#define CONFIG_AU1X00 1 /* alchemy series cpu */
+#define CONFIG_AU1X00 1 /* alchemy series cpu */
#ifdef CONFIG_DBAU1000
/* Also known as Merlot */
-#define CONFIG_AU1000 1
+#define CONFIG_AU1000 1
#else
#ifdef CONFIG_DBAU1100
-#define CONFIG_AU1100 1
+#define CONFIG_AU1100 1
#else
#ifdef CONFIG_DBAU1500
-#define CONFIG_AU1500 1
-#else
+#define CONFIG_AU1500 1
+#else
#error "No valid board set"
#endif
#endif
#endif
-#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */
+#define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */
#define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */
@@ -158,7 +158,7 @@
#define CFG_ATA_BASE_ADDR CFG_PCMCIA_MEM_ADDR
-/* Offset for data I/O */
+/* Offset for data I/O */
#define CFG_ATA_DATA_OFFSET 8
/* Offset for normal register accesses */
diff --git a/include/dataflash.h b/include/dataflash.h
index c404016..650454e 100644
--- a/include/dataflash.h
+++ b/include/dataflash.h
@@ -91,7 +91,6 @@
} AT91S_DataFlash, *AT91PS_DataFlash;
-
typedef struct _AT91S_DATAFLASH_INFO {
AT91S_DataflashDesc Desc;
diff --git a/include/flash.h b/include/flash.h
index 800fb4d..a0c9cad 100644
--- a/include/flash.h
+++ b/include/flash.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000, 2001
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -165,10 +165,13 @@
#define AMD_ID_DL640 0x227E227E /* 29DL640D ID (64 M, dual boot sectors)*/
#define AMD_ID_MIRROR 0x227E227E /* 1st ID word for MirrorBit family */
-#define AMD_ID_LV640U_2 0x220C220C /* 2d ID word for AM29LV640M at 0x38 */
-#define AMD_ID_LV640U_3 0x22012201 /* 3d ID word for AM29LV640M at 0x3c */
-#define AMD_ID_LV128U_2 0x22122212 /* 2d ID word for AM29LV128M at 0x38 */
-#define AMD_ID_LV128U_3 0x22002200 /* 3d ID word for AM29LV128M at 0x3c */
+#define AMD_ID_LV640U_2 0x220C220C /* 2d ID word for AM29LV640M at 0x38 */
+#define AMD_ID_LV640U_3 0x22012201 /* 3d ID word for AM29LV640M at 0x3c */
+#define AMD_ID_LV128U_2 0x22122212 /* 2d ID word for AM29LV128M at 0x38 */
+#define AMD_ID_LV128U_3 0x22002200 /* 3d ID word for AM29LV128M at 0x3c */
+
+#define AMD_ID_LV320B_2 0x221A221A /* 2d ID word for AM29LV320MB at 0x38 */
+#define AMD_ID_LV320B_3 0x22002200 /* 3d ID word for AM29LV320MB at 0x3c */
#define AMD_ID_LV640U 0x22D722D7 /* 29LV640U ID (64 M, uniform sectors) */
@@ -322,13 +325,15 @@
#define FLASH_28F320C3B 0x009F /* Intel 28F320C3B ( 32M = 2M x 16 ) */
#define FLASH_28F640C3T 0x00A0 /* Intel 28F640C3T ( 64M = 4M x 16 ) */
#define FLASH_28F640C3B 0x00A1 /* Intel 28F640C3B ( 64M = 4M x 16 ) */
-#define FLASH_AMLV320U 0x00A2 /* AMD 29LV128M ( 128M = 8M x 16 ) */
+#define FLASH_AMLV320U 0x00A2 /* AMD 29LV320M ( 32M = 2M x 16 ) */
#define FLASH_AMLV640U 0x00A4 /* AMD 29LV640M ( 64M = 4M x 16 ) */
#define FLASH_AMLV128U 0x00A6 /* AMD 29LV128M ( 128M = 8M x 16 ) */
+#define FLASH_AMLV320B 0x00A7 /* AMD 29LV320MB ( 32M = 2M x 16 ) */
+#define FLASH_AMLV320T 0x00A8 /* AMD 29LV320MT ( 32M = 2M x 16 ) */
/* Intel 28F256L18T 256M = 128K x 255 + 32k x 4 */
-#define FLASH_28F256L18T 0x00A8
-#define FLASH_AMDL163T 0x00A2 /* AMD AM29DL163T (2M x 16 ) */
-#define FLASH_AMDL163B 0x00A3
+#define FLASH_28F256L18T 0x00B0
+#define FLASH_AMDL163T 0x00B2 /* AMD AM29DL163T (2M x 16 ) */
+#define FLASH_AMDL163B 0x00B3
#define FLASH_UNKNOWN 0xFFFF /* unknown flash type */
diff --git a/include/mpc8xx.h b/include/mpc8xx.h
index 4c0c73c..847c2b4 100644
--- a/include/mpc8xx.h
+++ b/include/mpc8xx.h
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -135,18 +135,18 @@
* PLPRCR - PLL, Low-Power, and Reset Control Register 15-30
*/
#ifdef CONFIG_MPC866_et_al
-#define PLPRCR_MF_MSK 0xffff001e /* Multiplication factor + PDF bits */
-#define PLPRCR_MFN_MSK 0xf8000000 /* Multiplication factor numerator bits */
-#define PLPRCR_MFN_SHIFT 0x0000001b /* Multiplication factor numerator shift*/
-#define PLPRCR_MFD_MSK 0x07c00000 /* Multiplication factor denominator bits */
-#define PLPRCR_MFD_SHIFT 0x00000017 /* Multiplication factor denominator shift*/
+#define PLPRCR_MF_MSK 0xFFFF001E /* Multiplication factor + PDF bits */
+#define PLPRCR_MFN_MSK 0xF8000000 /* Multiplication factor numerator bits */
+#define PLPRCR_MFN_SHIFT 27 /* Multiplication factor numerator shift*/
+#define PLPRCR_MFD_MSK 0x07C00000 /* Multiplication factor denominator bits */
+#define PLPRCR_MFD_SHIFT 22 /* Multiplication factor denominator shift*/
#define PLPRCR_S_MSK 0x00300000 /* Multiplication factor integer bits */
-#define PLPRCR_S_SHIFT 0x00000014 /* Multiplication factor integer shift */
-#define PLPRCR_MFI_MSK 0x000f0000 /* Multiplication factor integer bits */
-#define PLPRCR_MFI_SHIFT 0x00000010 /* Multiplication factor integer shift */
+#define PLPRCR_S_SHIFT 20 /* Multiplication factor integer shift */
+#define PLPRCR_MFI_MSK 0x000F0000 /* Multiplication factor integer bits */
+#define PLPRCR_MFI_SHIFT 16 /* Multiplication factor integer shift */
#else
-#define PLPRCR_MF_MSK 0xfff00000 /* Multiplication factor bits */
-#define PLPRCR_MF_SHIFT 0x00000014 /* Multiplication factor shift value */
+#define PLPRCR_MF_MSK 0xFFF00000 /* Multiplication factor bits */
+#define PLPRCR_MF_SHIFT 20 /* Multiplication factor shift value */
#endif
#define PLPRCR_SPLSS 0x00008000 /* SPLL Lock Status Sticky bit */
#define PLPRCR_TEXPS 0x00004000 /* TEXP Status */
@@ -166,8 +166,8 @@
#define PLPRCR_LOLRE 0x00000040 /* Loss Of Lock Reset Enable */
#define PLPRCR_FIOPD 0x00000020 /* Force I/O Pull Down */
#ifdef CONFIG_MPC866_et_al
-#define PLPRCR_PDF_MSK 0x0000001e /* Predivision Factor bits */
-#define PLPRCR_PDF_SHIFT 0x00000001 /* Predivision Factor shift value */
+#define PLPRCR_PDF_MSK 0x0000001E /* Predivision Factor bits */
+#define PLPRCR_PDF_SHIFT 1 /* Predivision Factor shift value */
#define PLPRCR_DBRMO 0x00000001 /* DPLL BRM Order bit */
#endif
diff --git a/include/pci_ids.h b/include/pci_ids.h
index a27d31c..a5d7ed5 100644
--- a/include/pci_ids.h
+++ b/include/pci_ids.h
@@ -1543,4 +1543,3 @@
#define PCI_DEVICE_ID_SMI_710 0x0710
#define PCI_DEVICE_ID_SMI_712 0x0712
#define PCI_DEVICE_ID_SMI_810 0x0810
-
diff --git a/lib_m68k/board.c b/lib_m68k/board.c
index b4c6119..0bf637d 100644
--- a/lib_m68k/board.c
+++ b/lib_m68k/board.c
@@ -310,7 +310,7 @@
bd_t *bd;
bd = gd->bd;
- // icache_enable(); /* it's time to enable the instruction cache */
+ /* icache_enable(); /XX* it's time to enable the instruction cache */
/*
* Setup trap handlers
diff --git a/lib_nios/board.c b/lib_nios/board.c
index ff0d9f5..0bbedfd 100644
--- a/lib_nios/board.c
+++ b/lib_nios/board.c
@@ -174,4 +174,3 @@
puts("### ERROR ### Please reset board ###\n");
for (;;);
}
-
diff --git a/lib_ppc/board.c b/lib_ppc/board.c
index ea8adb9..8e05df1 100644
--- a/lib_ppc/board.c
+++ b/lib_ppc/board.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2000-2002
+ * (C) Copyright 2000-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
diff --git a/lib_ppc/interrupts.c b/lib_ppc/interrupts.c
index 1e540a5..b803952 100644
--- a/lib_ppc/interrupts.c
+++ b/lib_ppc/interrupts.c
@@ -46,11 +46,11 @@
static __inline__ unsigned long get_msr (void)
{
- unsigned long msr;
+ unsigned long msr;
- asm volatile ("mfmsr %0":"=r" (msr):);
+ asm volatile ("mfmsr %0":"=r" (msr):);
- return msr;
+ return msr;
}
static __inline__ void set_msr (unsigned long msr)
@@ -93,7 +93,7 @@
{
int ret;
- /* call cpu specific function from $(CPU)/interrupts.c */
+ /* call cpu specific function from $(CPU)/interrupts.c */
ret = interrupt_init_cpu (&decrementer_count);
if (ret)
@@ -124,7 +124,7 @@
#endif /* CONFIG_WATCHDOG || CONFIG_HW_WATCHDOG */
#ifdef CONFIG_STATUS_LED
- status_led_tick (timestamp);
+ status_led_tick (timestamp);
#endif /* CONFIG_STATUS_LED */
#ifdef CONFIG_SHOW_ACTIVITY
diff --git a/net/eth.c b/net/eth.c
index eabbf63..f295782 100644
--- a/net/eth.c
+++ b/net/eth.c
@@ -1,5 +1,5 @@
/*
- * (C) Copyright 2001, 2002
+ * (C) Copyright 2001-2004
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
@@ -217,9 +217,8 @@
char *end;
int i;
-#ifdef DEBUG
- printf("eth_set_enetaddr(num=%d, addr=%s)\n", num, addr);
-#endif
+ debug ("eth_set_enetaddr(num=%d, addr=%s)\n", num, addr);
+
if (!eth_devices)
return;
@@ -237,14 +236,12 @@
return;
}
-#ifdef DEBUG
- printf("Setting new HW address on %s\n", dev->name);
- printf("New Address is "
- "%02X:%02X:%02X:%02X:%02X:%02X\n",
- dev->enetaddr[0], dev->enetaddr[1],
- dev->enetaddr[2], dev->enetaddr[3],
- dev->enetaddr[4], dev->enetaddr[5]);
-#endif
+ debug ( "Setting new HW address on %s\n"
+ "New Address is %02X:%02X:%02X:%02X:%02X:%02X\n",
+ dev->name,
+ dev->enetaddr[0], dev->enetaddr[1],
+ dev->enetaddr[2], dev->enetaddr[3],
+ dev->enetaddr[4], dev->enetaddr[5]);
memcpy(dev->enetaddr, enetaddr, 6);
}
@@ -258,19 +255,14 @@
old_current = eth_current;
do {
-#ifdef DEBUG
- printf("Trying %s\n", eth_current->name);
-#endif
+ debug ("Trying %s\n", eth_current->name);
if (eth_current->init(eth_current, bis)) {
eth_current->state = ETH_STATE_ACTIVE;
return 1;
}
-
-#ifdef DEBUG
- puts ("FAIL\n");
-#endif
+ debug ("FAIL\n");
eth_try_another(0);
} while (old_current != eth_current);